/**************************************************************************** ** ** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies). ** All rights reserved. ** Contact: Nokia Corporation (qt-info@nokia.com) ** ** This file is part of the documentation of the Qt Toolkit. ** ** $QT_BEGIN_LICENSE:FDL$ ** No Commercial Usage ** This file contains pre-release code and may not be distributed. ** You may use this file in accordance with the terms and conditions ** contained in the Technology Preview License Agreement accompanying ** this package. ** ** GNU Free Documentation License ** Alternatively, this file may be used under the terms of the GNU Free ** Documentation License version 1.3 as published by the Free Software ** Foundation and appearing in the file included in the packaging of this ** file. ** ** If you have questions regarding the use of this file, please contact ** Nokia at qt-info@nokia.com. ** $QT_END_LICENSE$ ** ****************************************************************************/ /*! \group installation \title Installation \brief Installing Qt on supported platforms. The installation procedure is different on each Qt platform. This page provides information on how to install Qt, as well as software and hardware requirements for using Qt on each of the supported platforms. Please follow the instructions for your platform from the following list. \generatelist{related} */ /*! \page install-x11.html \title Installing Qt for X11 Platforms \ingroup installation \brief How to install Qt on platforms with X11. \previouspage Installation \tableofcontents Qt for X11 has some requirements that are given in more detail in the \l{Qt for X11 Requirements} document. \section1 Step 1: Installing the License File (commercial editions only) If you have the commercial edition of Qt, install your license file as \c{$HOME/.qt-license}. For the open source version you do not need a license file. \section1 Step 2: Unpacking the Archive Unpack the archive if you have not done so already. For example, if you have the \c{qt-everywhere-opensource-src-%VERSION%.tar.gz} package, type the following commands at a command line prompt: \snippet doc/src/snippets/code/doc_src_installation.qdoc 0 This creates the directory \c{/tmp/qt-everywhere-opensource-src-%VERSION%} containing the files from the archive. We only support the GNU version of the tar archiving utility. Note that on some systems it is called gtar. \section1 Step 3: Building the Library To configure the Qt library for your machine type, run the \c{./configure} script in the package directory. By default, Qt is configured for installation in the \c{/usr/local/Trolltech/Qt-%VERSION%} directory, but this can be changed by using the \c{-prefix} option. \snippet doc/src/snippets/code/doc_src_installation.qdoc 1 Type \c{./configure -help} to get a list of all available options. To create the library and compile all the demos, examples, tools, and tutorials, type: \snippet doc/src/snippets/code/doc_src_installation.qdoc 2 If \c{-prefix} is outside the build directory, you need to install the library, demos, examples, tools, and tutorials in the appropriate place. To do this (as root if necessary), type: \snippet doc/src/snippets/code/doc_src_installation.qdoc 3 Note that on some systems the make utility is named differently, e.g. gmake. The configure script tells you which make utility to use. \bold{Note:} If you later need to reconfigure and rebuild Qt from the same location, ensure that all traces of the previous configuration are removed by entering the build directory and typing \c{make confclean} before running \c configure again. \section1 Step 4: Set the Environment Variables In order to use Qt, some environment variables needs to be extended. \snippet doc/src/snippets/code/doc_src_installation.qdoc 4 This is done like this: In \c{.profile} (if your shell is bash, ksh, zsh or sh), add the following lines: \snippet doc/src/snippets/code/doc_src_installation.qdoc 5 In \c{.login} (in case your shell is csh or tcsh), add the following line: \snippet doc/src/snippets/code/doc_src_installation.qdoc 6 If you use a different shell, please modify your environment variables accordingly. For compilers that do not support rpath you must also extended the \c LD_LIBRARY_PATH environment variable to include \c{/usr/local/Trolltech/Qt-%VERSION%/lib}. On Linux with GCC this step is not needed. \bold {That's all. Qt is now installed.} \section1 Qt Demos and Examples If you are new to Qt, we suggest that you take a look at the demos and examples to see Qt in action. Run the Qt Examples and Demos either by typing \c qtdemo on the command line or through the desktop's Main menu. You might also want to try the following links: \list \o \l{Configuring Qt} \o \l{How to Learn Qt} \o \l{Tutorials} \o \l{Developer Zone} \o \l{Deploying Qt Applications} \endlist We hope you will enjoy using Qt. Good luck! */ /*! \page install-win.html \title Installing Qt for Windows \ingroup installation \brief How to install Qt on Windows. \previouspage Installation \tableofcontents Qt for Windows has some requirements that are given in more detail in the \l{Qt for Windows Requirements} document. If you have obtained a binary package for this platform, consult the installation instructions provided instead of the ones in this document. Open Source Versions of Qt is not officially supported for use with any version of Visual Studio. Integration with Visual Studio is available as part of the \l{Qt Commercial Edition}. \section1 Step 1: Install the License File (commercial editions only) If you have the commercial edition of Qt, copy the license file from your account on dist.trolltech.com into your home directory (this may be known as the \c userprofile environment variable) and rename it to \c{.qt-license}. This renaming process must be done using a \e{command prompt} on Windows, \bold{not} with Windows Explorer. For example on Windows 2000, \c{%USERPROFILE%} should be something like \c{C:\Documents and Settings\username} For the open source version you do not need a license file. \section1 Step 2: Unpack the Archive Uncompress the files into the directory you want Qt installed; e.g. \c{C:\Qt\%VERSION%}. \note The install path must not contain any spaces or Windows specific file system characters. \section1 Step 3: Set the Environment variables In order to build and use Qt, the \c PATH environment variable needs to be extended: \snippet doc/src/snippets/code/doc_src_installation.qdoc 7 This is done by adding \c{c:\Qt\%VERSION%\bin} to the \c PATH variable. For newer versions of Windows, \c PATH can be extended through the \menu{Control Panel|System|Advanced|Environment variables} menu. You may also need to ensure that the locations of your compiler and other build tools are listed in the \c PATH variable. This will depend on your choice of software development environment. \note If you don't use the configured shells, which is available in the application menu, in the \l{Open Source Versions of Qt}, \c configure requires that \c sh.exe is not in the path or that it is run from \c msys. This also goes for mingw32-make. \section1 Step 4: Build the Qt Library To configure the Qt library for your machine, type the following command in a \bold{Visual Studio} command prompt: \snippet doc/src/snippets/code/doc_src_installation.qdoc 8 Type \c{configure -help} to get a list of all available options. If you have multiple compilers installed, and want to build the Qt library using a specific compiler, you must specify a \c qmake specification. This is done by pasing \c{-platform } to configure; for example: \snippet doc/src/snippets/code/doc_src_installation.qdoc 9 In some cases you need to set up the compilation environment before running configure in order to use the right compiler. For instance, you need to do this if you have Visual Studio 2005 installed and want to compile Qt using the x64 compiler because the 32-bit and 64-bit compiler both use the same \c qmake specification file. This is usually done by selecting \menu{Microsoft Visual Studio 2005|Visual Studio Tools|} from the \gui Start menu. The actual commands needed to build Qt depends on your development system. For Microsoft Visual Studio to create the library and compile all the demos, examples, tools and tutorials type: \snippet doc/src/snippets/code/doc_src_installation.qdoc 10 \note If you later need to reconfigure and rebuild Qt from the same location, ensure that all traces of the previous configuration are removed by entering the build directory and typing \c{nmake distclean} before running \c configure again. \bold{That's all. Qt is now installed.} \section1 Qt Demos and Examples If you are new to Qt, we suggest that you take a look at the demos and examples to see Qt in action. Run the Qt Examples and Demos either by typing \c qtdemo on the command line or through the desktop's Start menu. You might also want to try the following links: \list \o \l{How to Learn Qt} \o \l{Tutorials} \o \l{Developer Zone} \o \l{Deploying Qt Applications} \endlist We hope you will enjoy using Qt. Good luck! */ /*! \page install-mac.html \title Installing Qt for Mac OS X \ingroup installation \brief How to install Qt on Mac OS X. \previouspage Installation \tableofcontents Qt for Mac OS X has some requirements that are given in more detail in the \l{Qt for Mac OS X Requirements} document. The following instructions describe how to install Qt from the source package. For the binary package, simply double-click on the Qt.mpkg and follow the instructions to install Qt. You can later run the \c{uninstall-qt.py} script to uninstall the binary package. The script is located in /Developer/Tools and must be run as root. \note Do not run the iPhone simulator while installing Qt. The \l{http://openradar.appspot.com/7214991} {iPhone simulator conflicts with the package installer}. \section1 Step 1: Install the License File (commercial editions only) If you have the commercial edition of Qt, install your license file as \c{$HOME/.qt-license}. For the open source version you do not need a license file. Unpack the archive if you have not done so already. For example, if you have the \c{qt-everywhere-opensource-src-%VERSION%.tar.gz} package, type the following commands at a command line prompt: \snippet doc/src/snippets/code/doc_src_installation.qdoc 11 This creates the directory \c{/tmp/qt-everywhere-opensource-src-%VERSION%} containing the files from the archive. \section1 Step 2: Build the Qt Library To configure the Qt library for your machine type, run the \c{./configure} script in the package directory. By default, Qt is configured for installation in the \c{/usr/local/Trolltech/Qt-%VERSION%} directory, but this can be changed by using the \c{-prefix} option. \snippet doc/src/snippets/code/doc_src_installation.qdoc 12 Type \c{./configure -help} to get a list of all available options. Note that you will need to specify \c{-universal} if you want to build universal binaries, and also supply a path to the \c{-sdk} option if your development machine has a PowerPC CPU. By default, Qt is built as a framework, but you can built it as a set of dynamic libraries (dylibs) by specifying the \c{-no-framework} option. Qt can also be configured to be built with debugging symbols. This process is described in detail in the \l{Debugging Techniques} document. To create the library and compile all the demos, examples, tools, and tutorials, type: \snippet doc/src/snippets/code/doc_src_installation.qdoc 13 If \c{-prefix} is outside the build directory, you need to install the library, demos, examples, tools, and tutorials in the appropriate place. To do this, type: \snippet doc/src/snippets/code/doc_src_installation.qdoc 14 This command requires that you have administrator access on your machine. \note There is a potential race condition when running make install with multiple jobs. It is best to only run one make job (-j1) for the install. If you later need to reconfigure and rebuild Qt from the same location, ensure that all traces of the previous configuration are removed by entering the build directory and typing \c{make confclean} before running \c configure again. \section1 Step 3: Set the Environment variables In order to use Qt, some environment variables need to be extended. \snippet doc/src/snippets/code/doc_src_installation.qdoc 15 This is done like this: In \c{.profile} (if your shell is bash), add the following lines: \snippet doc/src/snippets/code/doc_src_installation.qdoc 16 In \c{.login} (in case your shell is csh or tcsh), add the following line: \snippet doc/src/snippets/code/doc_src_installation.qdoc 17 If you use a different shell, please modify your environment variables accordingly. \bold {That's all. Qt is now installed.} \section1 Qt Demos and Examples If you are new to Qt, we suggest that you take a look at the demos and examples to see Qt in action. Run the Qt Examples and Demos either by typing \c qtdemo on the command line or through the desktop's Start menu. You might also want to try the following links: \list \o \l{How to Learn Qt} \o \l{Tutorials} \o \l{Developer Zone} \o \l{Deploying Qt Applications} \endlist We hope you will enjoy using Qt. Good luck! */ /*! \page install-wince.html \title Installing Qt for Windows CE \ingroup installation \ingroup qtce \brief How to install Qt for Windows CE. \previouspage Installation \tableofcontents Qt for Windows CE has some requirements that are given in more detail in the \l{Qt for Windows CE Requirements} document. \section1 Step 1: Install the License File (commercial editions only) Uncompress the files into the directory you want to install Qt into; e.g., \c{C:\Qt\%VERSION%}. \note The install path must not contain any spaces. \section1 Step 2: Set the Environment variables In order to build and use Qt, the \c PATH environment variable needs to be extended: \snippet doc/src/snippets/code/doc_src_installation.qdoc 18 This is done by adding \c{c:\Qt\%VERSION%\bin} to the \c PATH variable. For newer versions of Windows, \c PATH can be extended through "Control Panel->System->Advanced->Environment variables" and for older versions by editing \c{c:\autoexec.bat}. Make sure the enviroment variables for your compiler are set. Visual Studio includes \c{vcvars32.bat} for that purpose - or simply use the "Visual Studio Command Prompt" from the Start menu. \section1 Step 3: Configure Qt To configure Qt for Windows Mobile 5.0 for Pocket PC, type the following: \snippet doc/src/snippets/code/doc_src_installation.qdoc 19 If you want to configure Qt for another platform or with other options, type \c{configure -help} to get a list of all available options. See the \c README file for the list of supported platforms. \section1 Step 4: Build Qt Library Now, to build Qt you first have to update your \c PATH, \c INCLUDE and \c LIB paths to point to the correct resources for your target platforms. For a default installation of the Windows Mobile 5.0 Pocket PC SDK, this is done with the following commands: \snippet doc/src/snippets/code/doc_src_installation.qdoc 20 We provide a convenience script for this purpose, called \c{setcepaths}. Simply type: \snippet doc/src/snippets/code/doc_src_installation.qdoc 21 Then to build Qt type: \snippet doc/src/snippets/code/doc_src_installation.qdoc 22 \bold{That's all. Qt is now installed.} \section1 Qt Demos and Examples To get started with Qt, you can check out the examples found in the \c{examples} directory of your Qt installation. The documentation can be found in \c{doc\html}. \note If you reconfigure Qt for a different platform, make sure you start with a new clean console to get rid of the platform dependent include directories. The links below provide further information for using Qt: \list \o \l{How to Learn Qt} \o \l{Tutorials} \o \l{Developer Zone} \o \l{Deploying Qt Applications} \endlist You might also want to try the following Windows CE specific links: \list \o \l{Windows CE - Introduction to using Qt} \o \l{Windows CE - Working with Custom SDKs} \o \l{Windows CE - Using shadow builds} \o \l{Windows CE - Signing} \endlist Information on feature and performance tuning for embedded builds can be found on the following pages: \list \o \l{Fine-Tuning Features in Qt} \o \l{Qt Performance Tuning} \endlist We hope you will enjoy using Qt. Good luck! */ /*! \page install-Symbian-installer.html \title Installing Qt for the Symbian platform from a Binary Package \ingroup qtsymbian \brief How to install Qt for the Symbian platform from a binary package. \previouspage Installation \tableofcontents Qt for the Symbian platform has some requirements that are given in more detail in the \l{Qt for the Symbian platform Requirements} document. \section1 Step 1: Install Qt Run \c{qt-symbian-opensource-%VERSION%.exe} and follow the instructions. \note Qt must be installed on the same drive as the Symbian SDK you are using, and the install path must not contain any spaces. \section1 Step 2: Install Qt into a device To run Qt applications on a device, \c{qt_installer.sis} found in the Qt installation directory must be first installed into the device. \c{Qt_installer.sis} contains Qt libraries and Open C libraries all in one convenient package. Begin installation by connecting your device via USB cable to a computer that has the \l{http://www.nokia.com/pcsuite}{Nokia PC Suite} installed. On the device, select "PC Suite mode". In Windows Explorer right click on the \c{qt_installer.sis} file, select "Install with Nokia Application Installer" and follow the instructions. \section1 Running Qt demos We've included a subset of the Qt demos in this package for you to try out. An excellent starting point is the "fluidlauncher" demo. To run the demo on a real device, install \c{fluidlauncher.sis} found in the Qt installation directory to a device that already has Qt installed. After installation, you can find fluidlauncher in the applications folder of the device. To run the demos and examples on the emulator, you need to build them first. Open the "Qt for the Symbian platform Command Prompt" from the Start menu and type: \snippet doc/src/snippets/code/doc_src_installation.qdoc 25 To run the demos on the emulator simply navigate to the directory of the demo you want to see and run: \snippet doc/src/snippets/code/doc_src_installation.qdoc 27 For more information about building and running Qt programs on the Symbian platform, see \l{The Symbian platform - Introduction to Qt}. \bold{We hope you will enjoy using Qt.} */ /*! \page install-Symbian.html \title Installing Qt for the Symbian platform \ingroup installation \ingroup qtsymbian \brief How to install Qt for the Symbian platform. \previouspage Installation \tableofcontents Qt for the Symbian platform has some requirements that are given in more detail in the \l{Qt for the Symbian platform Requirements} document. This document describes how to install and configure Qt for the Symbian platform from scratch. If you are using pre-built binaries, follow the instructions given in the \l{Installing Qt for the Symbian platform from a Binary Package} document. \section1 Step 1: Set Up the Development Environment Make sure your Symbian development environment is correctly installed and patched as explained in the \l{Qt for the Symbian platform Requirements} document. After you have finished the Symbian development environment setup, it is good to verify that environment is functional for example by compiling one of the pure Symbian examples for both emulator and HW. This can be done from command prompt as follows: \snippet doc/src/snippets/code/doc_src_installation.qdoc 32 If all steps pass without errors your Symbian development environment is very likely installed correctly. \section1 Step 2: Install Qt Uncompress the \l{http://qt.nokia.com/downloads}{downloaded} source package into the directory you want Qt installed, e.g. \c{C:\Qt\%VERSION%}. \note Qt must be installed on the same drive as the Symbian SDK you are using, and the install path must not contain any spaces. \section1 Step 3: Set the Environment variables In order to build and use Qt, the \c PATH environment variable needs to be extended: \snippet doc/src/snippets/code/doc_src_installation.qdoc 18 This is done by adding \c{c:\Qt\%VERSION%\bin} to the \c PATH variable. On Windows the\c PATH can be extended by navigating to "Control Panel->System->Advanced->Environment variables". In addition, you must configure the environment for use with the Symbian emulator. This is done by locating the Carbide.c++ submenu on the Start menu, and choosing "Configure environment for WINSCW command line". If you are planning to use \c abld (the default build system that comes with the S60 SDK) to build Qt, you will also need to set the following environment variable: \snippet doc/src/snippets/code/doc_src_installation.qdoc 33 This is not necessary for other applications, only when building Qt. \section1 Step 4: Configure Qt To configure Qt for the Symbian platform, do: \snippet doc/src/snippets/code/doc_src_installation.qdoc 23 (to build the tools using MinGW, and the libraries using abld) \bold or \snippet doc/src/snippets/code/doc_src_installation.qdoc 31 (to build the tools using MinGW, and the libraries using SBSv2) SBSv2 (also known as \l{http://developer.symbian.org/wiki/index.php/Introduction_to_RAPTOR} {Raptor}) is a next-generation Symbian build system. SBSv2 is not officially supported by any of the S60 SDKs currently available from Forum Nokia. \section1 Step 5: Build Qt To build Qt for the emulator, type: \snippet doc/src/snippets/code/doc_src_installation.qdoc 24 To build Qt for the device, type: \snippet doc/src/snippets/code/doc_src_installation.qdoc 28 Congratulations, Qt is now ready to use. \section1 Step 7: Installing Qt Libraries on the Device To run the demo on a real device, you first have to install the Qt libraries on the device: \snippet doc/src/snippets/code/doc_src_installation.qdoc 29 The Qt libraries are built with "All -Tcb" capability, so that they can support all types of application. If you don't have a suitable certificate, it is possible to patch the binaries as follows: If you have no certificate, build a self signed Qt: \snippet doc/src/snippets/code/doc_src_installation.qdoc 34 If you have a symbian-signed developer certificate, specify the capabilities you can sign for, for example: \snippet doc/src/snippets/code/doc_src_installation.qdoc 35 \section1 Running Qt demos We've included a subset of the Qt demos in this package for you to try out. An excellent starting point is the "fluidlauncher" demo. Similarly, install fluidlauncher to the device: \snippet doc/src/snippets/code/doc_src_installation.qdoc 30 This will create a self-signed \c fluidlauncher.sis and install it to your device. To run the demos on the emulator simply navigate to the directory of the demo you want to see and run: \snippet doc/src/snippets/code/doc_src_installation.qdoc 27 For more information about building and running Qt programs on the Symbian platform, see \l{The Symbian platform - Introduction to Qt}. We hope you will enjoy using Qt. */ /*! \page install-symbian-linux.html \title Installing Qt for the Symbian platform using Linux (experimental) \ingroup installation \ingroup qtsymbian \brief How to install Qt for the Symbian platform using Linux. \previouspage Installation \tableofcontents This document describes how to install and configure Qt for the Symbian platform from scratch, using Linux as the build host. Qt for Symbian binaries can be downloaded directly so development of applications using Qt for Symbian can start right away. \section1 Step 1: Setup the Development Environment Qt for the Symbian platform has some requirements on the development platform. The Symbian SDK for Linux as well as a cross compiler for the ARM processor used on Symbian devices should be present on the development machine. See \l{http://qt.gitorious.org/qt/pages/QtCreatorSymbianLinux} for more details. \section1 Step 2: Unpack the Archive Uncompress the \l{http://qt.nokia.com/downloads}{downloaded} source package into the directory you want Qt installed, e.g. \c{/home/user/qt/%VERSION%}. \section1 Step 3: Set the Environment Variables In order to build and use Qt, the \c PATH environment variable needs to be extended to fine Qt tools and also to find the Symbian platform tools: First you need to set the \c EPOCROOT environment variable to point to the location of your S60 SDK: \snippet doc/src/snippets/code/doc_src_installation.qdoc 36 Then you can update the PATH variable; \snippet doc/src/snippets/code/doc_src_installation.qdoc 37 \section1 Step 4: Configure Qt To configure Qt for the Symbian platform, do: \snippet doc/src/snippets/code/doc_src_installation.qdoc 38 to build the libraries using RVCT or \snippet doc/src/snippets/code/doc_src_installation.qdoc 39 to build the libraries using GCCE. \section1 Step 5: Build Qt To build Qt for the device, type: \snippet doc/src/snippets/code/doc_src_installation.qdoc 40 Congratulations, Qt is now ready to use. \section1 Step 6: Building Qt Packages for the Device To run any application or demo on a real device, you need to install it on the device. To do this you first have to create a a package for the device, containing the libraries: \bold{Building a Qt package without a certificate} If you have no certificate, build a self signed Qt: \snippet doc/src/snippets/code/doc_src_installation.qdoc 41 The Qt libraries are built with "All -Tcb" capability, so that they can support all types of applications. However, these capabilities are automatically lowered if you make a self-signed package. \bold{Building a Qt package with a Symbian developer certificate} If you have a Symbian-signed developer certificate, specify the capabilities you can sign for, for example: \snippet doc/src/snippets/code/doc_src_installation.qdoc 42 \section2 Installing Qt Packages to the Device. It is possible to install packages to a phone in Linux by putting the package on the phone memory card and then installing manually from the phone menu. However, this is tedious and will not work on phones without a memory card, so the method recommended by Qt is to use the App TRK tool. \section3 Obtaining the App TRK package. Download the package from the following location. \list \o \l{http://tools.ext.nokia.com/trk/}{Application TRK}. Choose the correct installation package based on the S60 version of your device (\c{S60__app_trk_.sisx}). \endlist This package currently has to be installed by putting the package on the memory card and installing from the phone menu, or using a Windows PC for doing the install. However, the installation only has to be done once. \section3 Configuring App TRK on the Phone When App TRK is installed, connect the phone to the PC using the USB cable. Select "PCSuite" as connection type. Then run App TRK on the phone, and make sure that the connection type is USB. This can be changed under the \c Settings menu entry. If necessary, choose \c Connect from the menu. \section3 Configuring the USB Serial Driver on the Linux System On Linux, phone should appear as the \c /dev/ttyUSB1 device, however if you are running an old kernel, you may need to force the USB module to be loaded correctly before the device will appear: \snippet doc/src/snippets/code/doc_src_installation.qdoc 43 Note the identifier on the line where your Symbian device appears. Then execute the following, using the first and second part of the identifier in place of \c XXX, respectively. \snippet doc/src/snippets/code/doc_src_installation.qdoc 44 The \c rmmod step may fail if the module is not already loaded, but that is harmless. \section3 Building the runonphone Tool. Note that building the \c runonphone tool requires a separate installation of Qt for Linux. If there is a version of Qt installed by your distribution's package mechanism, that that should do fine. Some distributions separate the libraries from the development setup which includes \c qmake. Make sure you have both installed. You will also need the \l{libusb} libraries and header files installed. Usually, installing a development package such as \c{libusb-dev} will ensure that you have all the necessary dependencies installed. First, make sure that the \c qmake you use is taken from the Linux installation of Qt. The easiest way to make sure of this is to open a new shell and run the following command: \snippet doc/src/snippets/code/doc_src_installation.qdoc 45 \c qmake will tell you where it is installed. Copy the \c{%QTDIR%/tools/runonphone} folder to a place outside of the Qt tree. Then go to the folder in a shell and build it: \snippet doc/src/snippets/code/doc_src_installation.qdoc 46 Copy the resulting executable to a folder which is in your \c PATH environment variable. \section3 Installing the Built Package onto the Phone \note Before starting, please make sure that there is no previously installed version of Qt on the phone. Return to the root of the Qt tree configured for Symbian. Then install the Qt libraries by running the following: \snippet doc/src/snippets/code/doc_src_installation.qdoc 47 You may need to supply the path of the serial device file using the \c{-p} option: \snippet doc/src/snippets/code/doc_src_installation.qdoc runonphone with device file path If the installation fails, please make sure that there is no previously installed version of Qt on the phone. Qt requires some dependent packages to be installed on the device, which can be installed using the runonphone tool as well. One is the \c{sqlite3.sis}, which is included in the Qt distribution, while the others are shipped with the Symbian SDK. The required packages can be found from the following locations: \snippet doc/src/snippets/code/doc_src_installation.qdoc 50 It is also possible to install packages onto the device using the \c runonphone build rule that \c qmake automatically generates for each Qt project. Options can be supplied to the \c runonphone tool that is invoked begind the scenes: \snippet doc/src/snippets/code/doc_src_installation.qdoc make runonphone with options If you are running \c runonphone or invoking the \c runonphone build rule often, it is possible to set the \c QT_RUN_ON_PHONE_OPTIONS environment variable with the options you normally use: \snippet doc/src/snippets/code/doc_src_installation.qdoc make runonphone with preset environment variable This makes installation of packages onto a device easier and less error-prone. \section1 Running Qt Demos We've included a subset of the Qt demos in this package for you to try out. An excellent starting point is the "fluidlauncher" demo. Install and run the demo by using the following commands: \snippet doc/src/snippets/code/doc_src_installation.qdoc 48 The same command can be used for other applications: \snippet doc/src/snippets/code/doc_src_installation.qdoc 49 For more information about building and running Qt programs on the Symbian platform, see \l{The Symbian platform - Introduction to Qt}. We hope you will enjoy using Qt. */ /*! \page requirements.html \title General Qt Requirements \ingroup installation \brief Outlines the general requirements and dependencies needed to install Qt. This page describes the specific requirements of libraries and components on which Qt depends. For information about installing Qt, see the \l{Installation} page. For information about the platforms that Qt supports, see the \l{Supported Platforms} page. \section1 OpenSSL (version 0.9.7 or later) Support for \l{SSL}{Secure Sockets Layer (SSL)} communication is provided by the \l{OpenSSL Toolkit}, which must be obtained separately. More information about enabling SSL support can be found in the \l{Secure Sockets Layer (SSL) Classes} document. \section1 Platform-Specific Requirements Each platform has its own specific set of dependencies. Please see the relevant page for more details about the components that are required to build and install Qt on your platform. \list \o \l{Qt for Embedded Linux Requirements} \o \l{Qt for Mac OS X Requirements} \o \l{Qt for the Symbian platform Requirements} \o \l{Qt for Windows CE Requirements} \o \l{Qt for Windows Requirements} \o \l{Qt for X11 Requirements} \endlist */ /*! \page requirements-win.html \title Qt for Windows Requirements \ingroup installation \brief Setting up the Windows environment for Qt. \previouspage General Qt Requirements If you are using a binary version of Qt with Visual Studio 2005, you must first install the Visual Studio Service Pack 1 available \l{http://www.microsoft.com/downloads/details.aspx?FamilyId=BB4A75AB-E2D4-4C96-B39D-37BAF6B5B1DC&displaylang=en}{here} to avoid runtime conflicts. Additionally, you must use the Check for Updates feature in the Help menu of the Visual Studio 2005 IDE to apply at least the following security updates: KB937061, KB971023, KB971090, KB973673. If you are using a source edition of Qt, you must first install Perl so that the syncqt script invoked by configure can be executed. You can download this \l{http://www.activestate.com/downloads/}{here}. To build Qt with Phonon on Windows, you require: \list \o Microsoft's DirectX Software Development Kit which can be downloaded \l{http://msdn2.microsoft.com/en-us/directx/aa937788.aspx}{here}, and \o Microsoft's Windows Server 2003 R2 Platform SDK which is available \l{http://www.microsoft.com/downloads/details.aspx?FamilyID=0baf2b35-c656-4969-ace8-e4c0c0716adb&DisplayLang=en}{here}. \endlist \sa {Known Issues} */ /*! \page requirements-mac.html \title Qt for Mac OS X Requirements \ingroup installation \brief Setting up the Mac OS X environment for Qt. \previouspage General Qt Requirements Qt requires Xcode to be installed on the system. Xcode should be available on the Mac installation CD. \sa {Known Issues} */ /*! \page requirements-x11.html \title Qt for X11 Requirements \ingroup installation \brief Setting up the X11 environment for Qt. \previouspage General Qt Requirements \tableofcontents \section1 QtGui Dependencies \image x11_dependencies.png Qt for X11 Dependencies \raw HTML \endraw The QtGui module and the QtCore module, which provides the non-GUI features required by QtGui, depend on the libraries described in the following table. To build Qt from its source code, you will also need to install the development packages for these libraries for your system. \raw HTML
NameLibraryNotesConfiguration optionsMinimum working version
XRender libXrender X Rendering Extension; used for anti-aliasing -xrender or auto-detected0.9.0
Xrandr libXrandr X Resize and Rotate Extension -xrandr or auto-detected1.0.2
Xcursor libXcursor X Cursor Extension -xcursor or auto-detected1.1.4
Xfixes libXfixes X Fixes Extension -xfixes or auto-detected3.0.0
Xinerama libXinerama Multi-head support -xinerama or auto-detected1.1.0
Fontconfig libfontconfig Font customization and configuration -fontconfig or auto-detected2.1
FreeType libfreetype Font engine 2.1.3
Xi libXi X11 Input Extensions -xinput or auto-detected1.3.0
Xt libXt Xt Intrinsics0.99
Xext libXext X Extensions6.4.3
X11 libX11 X11 Client-Side Library6.2.1
SM libSM X Session Management -sm or auto-detected6.0.4
ICE libICE Inter-Client Exchange -sm or auto-detected6.3.5
glib libglib-2.0 Common event loop handling -glib or auto-detected2.8.3
pthread libpthread Multithreading 2.3.5
\endraw \note You must compile with XRender support to get alpha transparency support for pixmaps and images. Development packages for these libraries contain header files that are used when building Qt from its source code. On Debian-based GNU/Linux systems, for example, we recommend that you install the following development packages: \list \o libfontconfig1-dev \o libfreetype6-dev \o libx11-dev \o libxcursor-dev \o libxext-dev \o libxfixes-dev \o libxft-dev \o libxi-dev \o libxrandr-dev \o libxrender-dev \endlist Some of these packages depend on others in this list, so installing one may cause others to be automatically installed. Other distributions may provide system packages with similar names. \section1 OpenGL Dependencies The configure script will autodetect if OpenGL headers and libraries are installed on your system, and if so, it will include the QtOpenGL module in the Qt library. If your OpenGL headers or libraries are placed in a non-standard directory, you may need to change the \c QMAKE_INCDIR_OPENGL and/or \c QMAKE_LIBDIR_OPENGL in the config file for your system. The QGL documentation assumes that you are familiar with OpenGL programming. If you're new to the subject a good starting point is \l{http://www.opengl.org/}. \section1 Phonon Dependencies As described in the \l{Phonon Overview}, Phonon uses the GStreamer multimedia framework as the backend for audio and video playback on X11. The minimum required version of GStreamer is 0.10. To build Phonon, you need the GStreamer library, base plugins, and development files for your system. The package names for GStreamer vary between Linux distributions; try searching for \c gstreamer or \c libgstreamer in your distribution's package repository to find suitable packages. \sa {Known Issues} */ /*! \page requirements-wince.html \title Qt for Windows CE Requirements \ingroup installation \brief Setting up the Windows CE environment for Qt. \previouspage General Qt Requirements Qt is known to work with Visual Studio 2005/2008 and the following SDKs for Windows CE development on Windows XP and Windows Vista: \list \o Windows CE 5.0 Standard SDK for ARM, X86, and MIPS \o Windows CE 6.0 SDKs for ARM generated using the defaults found in Platform Builder \o Windows Mobile 5.0 (\e{Pocket PC}, \e{Smartphone} and \e{Pocket PC with Phone} editions) \o Windows Mobile 6.0 (\e{Standard}, \e{Classic} and \e{Professional} editions) \endlist Below is a list of links to download the SDKs: \list \o \l{http://www.microsoft.com/downloads/details.aspx?familyid=fa1a3d66-3f61-4ddc-9510-ae450e2318c3&displaylang=en} {Windows CE 5 Standard SDK} \o \l{http://www.microsoft.com/downloads/details.aspx?familyid=83A52AF2-F524-4EC5-9155-717CBE5D25ED&displaylang=en} {Windows Mobile 5 Pocket PC} \o \l{http://www.microsoft.com/downloads/details.aspx?familyid=DC6C00CB-738A-4B97-8910-5CD29AB5F8D9&displaylang=en} {Windows Mobile 5 Smartphone} \o \l{http://www.microsoft.com/downloads/details.aspx?familyid=06111A3A-A651-4745-88EF-3D48091A390B&displaylang=en } {Windows Mobile 6 Professional/Standard} \endlist \bold{Note:} \table \row \o \list 1 \o Currently, there is only compile support for Windows CE 5.0 Standard SDK for SH-4. \o There is currently no "out of the box" support for the Windows CE Automotive or Portable Media SDKs from Microsoft. \endlist \endtable Device manufacturers may prefer to make their own customized version of Windows CE using Platform Builder. In order for Qt for Windows CE to support a custom SDK, a build specification needs to be created. More information on Windows CE Customization can be found \l{Windows CE - Working with Custom SDKs}{here}. \sa {Known Issues} */ /*! \page requirements-embedded-linux.html \title Qt for Embedded Linux Requirements \ingroup installation \brief Setting up the Embedded Linux environment for Qt. \previouspage General Qt Requirements \sa {Known Issues} \section1 Building Qt for Embedded Linux with uclibc If you intend to include the QtWebKit module in your Qt build then you should use version \bold{uClibc 0.9.29 or greater} as that is the earliest version with sufficient pthread support. \section1 Memory Requirements The memory and storage requirements for Qt for Embedded Linux depend on a an variety of different factors, including the target architecture and the features enabled in the Qt build. The following table shows typical library sizes for the most common Qt libraries on different architectures, built in release mode with different feature profiles. \table \header \o{1,2} Architecture \o{1,2} Compiler \o{2,1} QtCore \o{2,1} QtGui \o{2,1} QtNetwork \o{2,1} QtWebKit \header \o Minimal \o Normal \o Minimal \o Normal \o Minimal \o Normal \o Minimal \o Normal \row \o linux-x86-g++ \o GCC 4.2.4 \o 1.7M \o 2.7M \o 3.3M \o 9.9M \o 653K \o 1.1M \o N/A \o 17M \row \o linux-arm-g++ \o GCC 4.1.1 \o 1.9M \o 3.2M \o 4.1M \o 11M \o 507K \o 1.0M \o N/A \o 17M \row \o linux-mips-g++ (MIPS32) \o GCC 4.2.4 \o 2.0M \o 3.2M \o 4.5M \o 12M \o 505K \o 1003K \o N/A \o 21M \endtable Library sizes are given in the following units: K = 1024 bytes; M = 1024K. QtWebKit is excluded from the minimal configuration. The \l{Fine-Tuning Features in Qt} document covers the process of configuring Qt builds to avoid the inclusion of unnecessary features. \section1 Additional X11 Libraries for QVFb The Virtual Framebuffer (QVFb) application requires the \c libxtst library in addition to the libraries used to build Qt for X11. This library enables the use of the Record extension to the X protocol to be used in applications. */ /*! \page requirements-symbian.html \title Qt for the Symbian platform Requirements \ingroup installation \brief Setting up the Symbian platform environment for Qt. \previouspage General Qt Requirements Qt for the Symbian platform requires the following software installed on your development PC: \list \o \l{http://www.forum.nokia.com/Library/Tools_and_downloads/Other/Carbide.c++/}{Carbide.c++ v2.3.0 or higher recommended}. \list \o \bold{Note:} It may be necessary to update the Carbide compiler depending on Carbide version. See \l{http://pepper.troll.no/s60prereleases/patches/}{here} for instructions how to check your compiler version and how to patch it, if needed. \endlist \o \l{http://downloads.activestate.com/ActivePerl/releases}{ActivePerl 5.6.1 build 638 or higher} \list \o \bold{Note:} According to Symbian, version 5.6.1 build 638 is mandatory for building Symbian applications, but that version is no longer available from ActiveState. However, Qt for Symbian has been successfully compiled using both 5.8.x and 5.10.x versions. \endlist \o \l{http://www.forum.nokia.com/info/sw.nokia.com/id/ec866fab-4b76-49f6-b5a5-af0631419e9c/S60_All_in_One_SDKs.html}{S60 Platform SDK 3rd Edition FP1 or higher} \list \o \bold{Note:} Users of \bold{S60 Platform SDK 3rd Edition FP1} also need special update. The update can be found \l{http://pepper.troll.no/s60prereleases/patches/}{here}. \endlist \o \l{http://www.forum.nokia.com/info/sw.nokia.com/id/91d89929-fb8c-4d66-bea0-227e42df9053/Open_C_SDK_Plug-In.html}{Open C/C++ v1.7.5 or higher}. Install this to all Symbian SDKs you plan to use Qt with. \o Building Qt tools from scratch requires \l{http://www.mingw.org/}{MinGW 3.4.5 or higher}, or another windows compiler. \list \o \bold{Note:} This is not required if you are using pre-built binary package. \endlist \o Building Qt libraries requires \l{http://www.arm.com/products/tools/software-development-tools.php}{RVCT} version 2.2 (build 686 or later), which is not available free of charge. Usage of later versions of RVCT, including the 3.x and 4.x series, is not supported in this release. \endlist Running Qt on real device requires the Open C and sqlite3 to be installed on the device. These installation packages are embedded into \c{qt_installer.sis}, which is included in Qt for Symbian binary package. If you are building Qt from scratch, you can find the sqlite3 package from under your Qt installation: \list \o \c{src\s60installs\sqlite3.sis} \endlist The Open C packages you can find in the Symbian SDK where you installed Open C/C++: \list \o \c{nokia_plugin\openc\s60opencsis\pips_s60_.sis} \o \c{nokia_plugin\openc\s60opencsis\openc_ssl_s60_.sis} \o \c{nokia_plugin\opencpp\s60opencppsis\stdcpp_s60_.sis} \endlist If you wish to do hardware debugging with Carbide or run applications in real devices using "make run" command, TRK must be installed to the device. \bold{Note:} TRK is not required if you just want to install and run applications manually on the device. \list \o \l{http://tools.ext.nokia.com/trk/}{Application TRK}. Choose the correct installation package based on the S60 version of your device (S60__app_trk_.sisx). \endlist We recommend you to take a look at \l{http://developer.symbian.org/wiki/index.php/Qt_Quick_Start}{Symbian Foundation - Qt Quick Start} to get more information about how to setup the development environment. \sa {Known Issues} */ /*! \page configure-options.html \title Configure options for Qt \ingroup installation \brief Brief description of available options building Qt. This page gives a brief description of the different options available when building Qt using configure. To build Qt using default options, just call configure from the command line like showed below. If you would like to customize your build, please use the options listed in the following tables. \c {.\configure.exe} \section2 Cross platform options: \table \header \o Option \o Description \o Note \row \o \c {-buildkey } \o Build the Qt library and plugins using the specified \o \row \o \c {} \o When the library loads plugins, it will only load those that have a matching . \o \row \o \c {-release } \o Compile and link Qt with debugging turned off. \o \row \o \c {-debug } \o Compile and link Qt with debugging turned on. \o Defualt value. \row \o \c {-debug-and-release} \o Compile and link two Qt libraries, with and without debugging turned on. \o This option denotes a default value and needs to be evaluated. If the evaluation succeeds, the feature is included. \row \o \c {-opensource} \o Compile and link the Open-Source Edition of Qt. \o \row \o \c {-commercial } \o Compile and link the Commercial Edition of Qt. \o \row \o \c {-developer-build} \o Compile and link Qt with Qt developer options including auto-tests exporting) \o \row \o \c {-shared} \o Create and use shared Qt libraries. \o Defualt value. \row \o \c {-static} \o Create and use static Qt libraries. \o \row \o \c {-ltcg} \o Use Link Time Code Generation. \o Apply to release builds only. \row \o \c {-no-ltcg} \o Do not use Link Time Code Generation. \o Defualt value. \row \o \c {-no-fast} \o Configure Qt normally by generating Makefiles for all project files. \o Defualt value. \row \o \c {-fast} \o Configure Qt quickly by generating Makefiles only for library and subdirectory targets. \o All other Makefiles are created as wrappers which will in turn run qmake. \row \o \c {-no-exceptions} \o Disable exceptions on platforms that support it. \o \row \o \c {-exceptions} \o Enable exceptions on platforms that support it. \o Defualt value. \row \o \c {-no-accessibility} \o Do not compile Windows Active Accessibility support. \o \row \o \c {-accessibility} \o Compile Windows Active Accessibility support. \o Defualt value. \row \o \c {-no-stl} \o Do not compile STL support. \o \row \o \c {-stl} \o Compile STL support. \o Defualt value. \row \o \c {-no-sql-} \o Disable SQL entirely, by default none are turned on. \o \row \o \c {-qt-sql-} \o Enable a SQL in the Qt Library. \o \row \o \c {-plugin-sql-} \o Enable SQL as a plugin to be linked to at run time. \o Available values for : mysql, psql, oci, odbc, tds, db2, sqlite, sqlite2, ibase. Drivers marked with a '+' during configure have been detected as available on this system. \row \o \c {-system-sqlite} \o Use sqlite from the operating system. \o \row \o \c {-no-qt3support} \o Disables the Qt 3 support functionality. \o \row \o \c {-no-opengl} \o Disables OpenGL functionality \o \row \o \c {-opengl } \o Enable OpenGL support with specified API version. \o Available values for : desktop - Enable support for Desktop OpenGL (Default), es1 - Enable support for OpenGL ES Common Profile, es2 - Enable support for OpenGL ES 2.0. \row \o \c {-no-openvg} \o Disables OpenVG functionality \o Defualt value. \row \o \c {-openvg} \o Enables OpenVG functionality \o Requires EGL support, typically supplied by an OpenGL or other graphics implementation. \row \o \c {-platform } \o The operating system and compiler you are building on. \o The default value is %QMAKESPEC%. \row \o \c {-xplatform } \o The operating system and compiler you are cross compiling to. \o See the README file for a list of supported operating systems and compilers. \row \o \c {-qtnamespace } \o Wraps all Qt library code in 'namespace name {..} \o \row \o \c {-qtlibinfix } \o Renames all Qt* libs to Qt* \o \row \o \c {-D } \o Add an explicit define to the preprocessor. \o \row \o \c {-I } \o Add an explicit include path. \o \row \o \c {-L } \o Add an explicit library path. \o \row \o \c {-l } \o Add an explicit library name, residing in a librarypath. \o \row \o \c {-graphicssystem } \o Specify which graphicssystem should be used. \o Available values for : * raster - Software rasterizer, opengl - Using OpenGL acceleration, experimental!, openvg - Using OpenVG acceleration, experimental! \row \o \c {-help, -h, -?} \o Display this information. \o \endtable \section2 Third Party Libraries: \table \header \o Option \o Description \o Note \row \o \c {-qt-zlib} \o Use the zlib bundled with Qt. \o \row \o \c {-system-zlib} \o Use zlib from the operating system. \o See http://www.gzip.org/zlib \row \o \c {-no-gif} \o Do not compile GIF reading support. \o This option denotes a default value and needs to be evaluated. If the evaluation succeeds, the feature is included. \row \o \c {-qt-gif} \o Compile GIF reading support. \o See also src/gui/image/qgifhandler_p.h \row \o \c {-no-libpng} \o Do not compile PNG support. \o \row \o \c {-qt-libpng} \o Use the libpng bundled with Qt. \o This option denotes a default value and needs to be evaluated. If the evaluation succeeds, the feature is included. \row \o \c {-system-libpng} \o Use libpng from the operating system. \o See http://www.libpng.org/pub/png \row \o \c {-no-libmng} \o Do not compile MNG support. \o This option denotes a default value and needs to be evaluated. If the evaluation succeeds, the feature is included. \row \o \c {-qt-libmng} \o Use the libmng bundled with Qt. \o \row \o \c {-system-libmng} \o Use libmng from the operating system. \o See See http://www.libmng.com \row \o \c {-no-libtiff} \o Do not compile TIFF support. \o This option denotes a default value and needs to be evaluated. If the evaluation succeeds, the feature is included. \row \o \c {-qt-libtiff} \o Use the libtiff bundled with Qt. \o \row \o \c {-system-libtiff} \o Use libtiff from the operating system. \o See http://www.libtiff.org \row \o \c {-no-libjpeg} \o Do not compile JPEG support. \o This option denotes a default value and needs to be evaluated. If the evaluation succeeds, the feature is included. \row \o \c {-qt-libjpeg} \o Use the libjpeg bundled with Qt. \o \row \o \c {-system-libjpeg} \o Use libjpeg from the operating system. \o See http://www.ijg.org. This option denotes a default value and needs to be evaluated. If the evaluation succeeds, the feature is included. \endtable \section2 Qt for Windows only: \table \header \o Option \o Description \o Note \row \o \c {-no-dsp} \o Do not generate VC++ .dsp files. \o \row \o \c {-dsp} \o Generate VC++ .dsp files, only if spec "win32-msvc". \o Defualt value. \row \o \c {-no-vcproj} \o Do not generate VC++ .vcproj files. \o \row \o \c {-vcproj} \o Generate VC++ .vcproj files, only if platform "win32-msvc.net". \o Defualt value. \row \o \c {-no-incredibuild-xge} \o Do not add IncrediBuild XGE distribution commands to custom build steps. \o \row \o \c {-incredibuild-xge} \o Add IncrediBuild XGE distribution commands to custom build steps. This will distribute MOC and UIC steps, and other custom buildsteps which are added to the INCREDIBUILD_XGE variable. \o The IncrediBuild distribution commands are only added to Visual Studio projects. This option denotes a default value and needs to be evaluated. If the evaluation succeeds, the feature is included. \row \o \c {-no-plugin-manifests} \o Do not embed manifests in plugins. \o \row \o \c {-plugin-manifests} \o Embed manifests in plugins. \o Defualt value. \row \o \c {-no-qmake} \o Do not compile qmake. \o \row \o \c {-qmake} \o Compile qmake. \o Defualt value \row \o \c {-dont-process} \o Do not generate Makefiles/Project files. This will override -no-fast if specified. \o \row \o \c {-process} \o Generate Makefiles/Project files. \o Defualt value. \row \o \c {-no-rtti} \o Do not compile runtime type information. \o \row \o \c {-rtti} \o Compile runtime type information. \o Defualt value. \row \o \c {-no-mmx} \o Do not compile with use of MMX instructions \o \row \o \c {-mmx} \o Compile with use of MMX instructions \o This option denotes a default value and needs to be evaluated. If the evaluation succeeds, the feature is included. \row \o \c {-no-3dnow} \o Do not compile with use of 3DNOW instructions \o \row \o \c {-3dnow} \o Compile with use of 3DNOW instructions \o This option denotes a default value and needs to be evaluated. If the evaluation succeeds, the feature is included. \row \o \c {-no-sse} \o Do not compile with use of SSE instructions \o \row \o \c {-sse} \o Compile with use of SSE instructions \o This option denotes a default value and needs to be evaluated. If the evaluation succeeds, the feature is included. \row \o \c {-no-sse2} \o Do not compile with use of SSE2 instructions \o \row \o \c {-sse2} \o Compile with use of SSE2 instructions \o This option denotes a default value and needs to be evaluated. If the evaluation succeeds, the feature is included. \row \o \c {-no-openssl} \o Do not compile in OpenSSL support \o \row \o \c {-openssl} \o Compile in run-time OpenSSL support \o This option denotes a default value and needs to be evaluated. If the evaluation succeeds, the feature is included. \row \o \c {-openssl-linked} \o Compile in linked OpenSSL support \o \row \o \c {-no-dbus} \o Do not compile in D-Bus support \o \row \o \c {-dbus} \o Compile in D-Bus support and load libdbus-1 dynamically. \o This option denotes a default value and needs to be evaluated. If the evaluation succeeds, the feature is included. \row \o \c {-dbus-linked} \o Compile in D-Bus support and link to libdbus-1 \o \row \o \c {-no-phonon} \o Do not compile in the Phonon module \o \row \o \c {-phonon} \o Compile the Phonon module. \o Phonon is built if a decent C++ compiler is used. This option denotes a default value and needs to be evaluated. If the evaluation succeeds, the feature is included. \row \o \c {-no-phonon-backend} \o Do not compile the platform-specific Phonon backend-plugin \o \row \o \c {-phonon-backend} \o Compile in the platform-specific Phonon backend-plugin \o Defualt value. \row \o \c {-no-multimedia} \o Do not compile the multimedia module \o \row \o \c {-multimedia} \o Compile in multimedia module \o Defualt value. \row \o \c {-no-audio-backend} \o Do not compile in the platform audio backend into QtMultimedia \o \row \o \c {-audio-backend} \o Compile in the platform audio backend into QtMultimedia \o This option denotes a default value and needs to be evaluated. If the evaluation succeeds, the feature is included. \row \o \c {-no-webkit} \o Do not compile in the WebKit module \o \row \o \c {-webkit} \o Compile in the WebKit module \o WebKit is built if a decent C++ compiler is used. This option denotes a default value and needs to be evaluated. If the evaluation succeeds, the feature is included. \row \o \c {-webkit-debug} \o Compile in the WebKit module with debug symbols. \o \row \o \c {-no-script} \o Do not build the QtScript module. \o \row \o \c {-script} \o Build the QtScript module. \o This option denotes a default value and needs to be evaluated. If the evaluation succeeds, the feature is included. \row \o \c {-no-scripttools} \o Do not build the QtScriptTools module. \o \row \o \c {-scripttools} \o Build the QtScriptTools module. \o This option denotes a default value and needs to be evaluated. If the evaluation succeeds, the feature is included. \row \o \c {-no-declarative} \o Do not build the declarative module \o \row \o \c {-declarative} \o Build the declarative module \o This option denotes a default value and needs to be evaluated. If the evaluation succeeds, the feature is included. \row \o \c {-no-declarative-debug} \o Do not build the declarative debugging support \o \row \o \c {-declarative-debug} \o Build the declarative debugging support \o Defualt value. \row \o \c {-arch } \o Specify an architecture. \o Available values for : * windows, windowsce, symbian, boundschecker, generic. \row \o \c {-no-style-