/**************************************************************************** ** ** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). ** All rights reserved. ** Contact: Nokia Corporation (qt-info@nokia.com) ** ** This file is part of the documentation of the Qt Toolkit. ** ** $QT_BEGIN_LICENSE:LGPL$ ** Commercial Usage ** Licensees holding valid Qt Commercial licenses may use this file in ** accordance with the Qt Commercial License Agreement provided with the ** Software or, alternatively, in accordance with the terms contained in ** a written agreement between you and Nokia. ** ** GNU Lesser General Public License Usage ** Alternatively, this file may be used under the terms of the GNU Lesser ** General Public License version 2.1 as published by the Free Software ** Foundation and appearing in the file LICENSE.LGPL included in the ** packaging of this file. Please review the following information to ** ensure the GNU Lesser General Public License version 2.1 requirements ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. ** ** In addition, as a special exception, Nokia gives you certain additional ** rights. These rights are described in the Nokia Qt LGPL Exception ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package. ** ** GNU General Public License Usage ** Alternatively, this file may be used under the terms of the GNU ** General Public License version 3.0 as published by the Free Software ** Foundation and appearing in the file LICENSE.GPL included in the ** packaging of this file. Please review the following information to ** ensure the GNU General Public License version 3.0 requirements will be ** met: http://www.gnu.org/copyleft/gpl.html. ** ** If you have questions regarding the use of this file, please contact ** Nokia at qt-info@nokia.com. ** $QT_END_LICENSE$ ** ****************************************************************************/ /*! \group modules \title All Qt Modules \startpage index.html Qt Reference Documentation \nextpage QtCore \ingroup classlists \brief Qt 4 comprises several modules. Each module is a separate library. \table 80% \header \o {2,1} \bold{Modules for general software development} \row \o \l{QtCore} \o Core non-graphical classes used by other modules \row \o \l{QtGui} \o Graphical user interface (GUI) components \row \o \l{QtMultimedia} \o Classes for low-level multimedia functionality \row \o \l{QtNetwork} \o Classes for network programming \row \o \l{QtOpenGL} \o OpenGL support classes \row \o \l{QtOpenVG} \o OpenVG support classes \row \o \l{QtScript} \o Classes for evaluating Qt Scripts \row \o \l{QtScriptTools} \o Additional Qt Script components \row \o \l{QtSql} \o Classes for database integration using SQL \row \o \l{QtSvg} \o Classes for displaying the contents of SVG files \row \o \l{QtWebKit} \o Classes for displaying and editing Web content \row \o \l{QtXml} \o Classes for handling XML \row \o \l{QtXmlPatterns} \o An XQuery & XPath engine for XML and custom data models \row \o \l{Phonon Module}{Phonon} \o Multimedia framework classes \row \o \l{Qt3Support} \o Qt 3 compatibility classes \header \o {2,1} \bold{Modules for working with Qt's tools} \row \o \l{QtDesigner} \o Classes for extending \QD \row \o \l{QtUiTools} \o Classes for handling \QD forms in applications \row \o \l{QtHelp} \o Classes for online help \row \o \l{QtTest} \o Tool classes for unit testing \header \o {2,1} \bold{Modules for Windows developers} \row \o \l{QAxContainer} \o Extension for accessing ActiveX controls \row \o \l{QAxServer} \o Extension for writing ActiveX servers \header \o {2,1} \bold{Modules for Unix developers} \row \o \l{QtDBus} \o Classes for Inter-Process Communication using the D-Bus \endtable If you use \l qmake to build your projects, the QtCore and QtGui modules are included by default. To link only against QtCore, add the following line to your \c .pro file: \snippet doc/src/snippets/code/doc_src_modules.qdoc 0 On Windows, if you do not use \l qmake or other build tools such as CMake, you also need to link against the \c qtmain library. \sa {Class and Function Documentation} */ /*! \module QtCore \title QtCore Module \contentspage All Qt Modules \previouspage All Qt Modules \nextpage QtGui \ingroup modules \keyword QtCore \brief The QtCore module contains core non-GUI functionality. All other Qt modules rely on this module. To include the definitions of the module's classes, use the following directive: \snippet doc/src/snippets/code/doc_src_qtcore.qdoc 0 The QtCore module is part of all \l{Qt editions}. */ /*! \module QtGui \title QtGui Module \contentspage All Qt Modules \previouspage QtCore \nextpage QtNetwork \ingroup modules \brief The QtGui module extends QtCore with GUI functionality. To include the definitions of both modules' classes, use the following directive: \snippet doc/src/snippets/code/doc_src_qtgui.qdoc 0 The QtGui module is part of the \l{Qt GUI Framework Edition}, the \l{Qt Full Framework Edition}, and the \l{Open Source Versions of Qt}. */ /*! \module QtMultimedia \title QtMultimedia Module \contentspage All Qt Modules \previouspage QtCore \nextpage QtNetwork \ingroup modules \brief The QtMultimedia module provides low-level multimedia functionality. To include the definitions of the module's classes, use the following directive: \snippet doc/src/snippets/code/doc_src_qtmultimedia.qdoc 1 To link against the module, add this line to your \l qmake \c .pro file: \snippet doc/src/snippets/code/doc_src_qtmultimedia.qdoc 0 The functionality provided by the \l{Phonon Module} is on a higher level and in many cases more suitable for application developers. */ /*! \module QtNetwork \title QtNetwork Module \contentspage All Qt Modules \previouspage QtMultimedia \nextpage QtOpenGL \ingroup modules \brief The QtNetwork module provides classes to make network programming easier and portable. To include the definitions of the module's classes, use the following directive: \snippet doc/src/snippets/code/doc_src_qtnetwork.qdoc 1 To link against the module, add this line to your \l qmake \c .pro file: \snippet doc/src/snippets/code/doc_src_qtnetwork.qdoc 0 The QtNetwork module is part of the \l{Qt Full Framework Edition} and the \l{Open Source Versions of Qt}. */ /*! \module QtOpenGL \title QtOpenGL Module \contentspage All Qt Modules \previouspage QtNetwork \nextpage QtOpenVG \ingroup modules \brief The QtOpenGL module offers classes that make it easy to use OpenGL in Qt applications. OpenGL is a standard API for rendering 3D graphics. OpenGL only deals with 3D rendering and provides little or no support for GUI programming issues. The user interface for an OpenGL application must be created with another toolkit, such as Motif on the X platform, Microsoft Foundation Classes (MFC) under Windows, or Qt on both platforms. \note OpenGL is a trademark of Silicon Graphics, Inc. in the United States and other countries. The Qt OpenGL module makes it easy to use OpenGL in Qt applications. It provides an OpenGL widget class that can be used just like any other Qt widget, except that it opens an OpenGL display buffer where you can use the OpenGL API to render the contents. To include the definitions of the module's classes, use the following directive: \snippet doc/src/snippets/code/doc_src_qtopengl.qdoc 0 To link against the module, add this line to your \l qmake \c .pro file: \snippet doc/src/snippets/code/doc_src_qtopengl.qdoc 1 The Qt OpenGL module is implemented as a platform-independent Qt/C++ wrapper around the platform-dependent GLX (version 1.3 or later), WGL, or AGL C APIs. Although the basic functionality provided is very similar to Mark Kilgard's GLUT library, applications using the Qt OpenGL module can take advantage of the whole Qt API for non-OpenGL-specific GUI functionality. The QtOpenGL module is part of the \l{Qt Full Framework Edition} and the \l{Open Source Versions of Qt}. It is available on Windows, X11, and Mac OS X. \l{Qt for Embedded Linux and OpenGL} supports OpenGL ES (OpenGL for Embedded Systems). \note To be able to use the OpenGL API in \l{Qt for Embedded Linux}, it must be integrated with the Q Window System (QWS). See the \l{Qt for Embedded Linux and OpenGL} documentation for details. */ /*! \module QtOpenVG \title QtOpenVG Module \since 4.6 \contentspage All Qt Modules \previouspage QtOpenGL \nextpage QtScript \ingroup modules \brief The QtOpenVG module is a plugin that provides support for OpenVG painting. OpenVG is a standard API from the \l{http://www.khronos.org/openvg}{Khronos Group} for accelerated 2D vector graphics that is appearing in an increasing number of embedded devices. OpenVG support can be enabled by passing the \c{-openvg} option to configure. It is assumed that the following qmake variables are set to appropriate values in the qmake.conf file for your platform: \list \o QMAKE_INCDIR_OPENVG \o QMAKE_LIBDIR_OPENVG \o QMAKE_LIBS_OPENVG \endlist Most OpenVG implementations are based on EGL, so the following variables may also need to be set: \list \o QMAKE_INCDIR_EGL \o QMAKE_LIBDIR_EGL \o QMAKE_LIBS_EGL \endlist See \l{qmake Variable Reference} for more information on these variables. Two kinds of OpenVG engines are currently supported: EGL based, and engines built on top of OpenGL such as \l{http://sourceforge.net/projects/shivavg}{ShivaVG}. EGL based engines are preferred. Once the graphics system plugin has been built and installed, applications can be run as follows to use the plugin: \code app -graphicssystem OpenVG \endcode If ShivaVG is being used, then substitute \c ShivaVG instead of \c OpenVG in the line above. */ /*! \module QtScript \title QtScript Module \since 4.3 \contentspage All Qt Modules \previouspage QtOpenVG \nextpage QtScriptTools \ingroup modules \brief The QtScript module provides classes for making Qt applications scriptable. The QtScript module only provides core scripting facilities; the QtScriptTools module provides additional Qt Script-related components that application developers may find useful. \tableofcontents To include the definitions of the module's classes, use the following directive: \snippet doc/src/snippets/code/doc_src_qtscript.qdoc 0 To link against the module, add this line to your \l qmake \c .pro file: \snippet doc/src/snippets/code/doc_src_qtscript.qdoc 1 For detailed information on how to make your application scriptable with QtScript, see \l{Making Applications Scriptable}. The QtScript module is part of the \l{Qt Full Framework Edition} and the \l{Open Source Versions of Qt}. \section1 License Information Qt Commercial Edition licensees that wish to distribute applications that use the QtScript module need to be aware of their obligations under the GNU Library General Public License (LGPL). Developers using the Open Source Edition can choose to redistribute the module under the appropriate version of the GNU LGPL. \legalese QtScript is licensed under the GNU Library General Public License. Individual contributor names and copyright dates can be found inline in the code. This library is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this library; see the file COPYING.LIB. If not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. \endlegalese */ /*! \module QtScriptTools \title QtScriptTools Module \since 4.5 \contentspage All Qt Modules \previouspage QtScript \nextpage QtSql \ingroup modules \brief The QtScriptTools module provides additional components for applications that use Qt Script. \tableofcontents \section1 Configuring the Build Process Applications that use the Qt Script Tools classes need to be configured to be built against the QtScriptTools module. To include the definitions of the module's classes, use the following directive: \snippet doc/src/snippets/code/doc.src.qtscripttools.qdoc 0 To link against the module, add this line to your \l qmake \c .pro file: \snippet doc/src/snippets/code/doc.src.qtscripttools.qdoc 1 The QtScriptTools module is part of the \l{Qt Full Framework Edition} and the \l{Open Source Versions of Qt}. */ /*! \module QtSql \title QtSql Module \contentspage All Qt Modules \previouspage QtScript \nextpage QtSvg \ingroup modules To include the definitions of the module's classes, use the following directive: \snippet doc/src/snippets/code/doc_src_qtsql.qdoc 0 To link against the module, add this line to your \l qmake \c .pro file: \snippet doc/src/snippets/code/doc_src_qtsql.qdoc 1 The QtSql module is part of the \l{Qt Full Framework Edition} and the \l{Open Source Versions of Qt}. See the \l{SQL Programming} guide for information about using this module in your applications. */ /*! \module QtSvg \title QtSvg Module \since 4.1 \contentspage All Qt Modules \previouspage QtSql \nextpage QtWebKit \ingroup modules \brief The QtSvg module provides classes for displaying and creating SVG files. To include the definitions of the module's classes, use the following directive: \snippet doc/src/snippets/code/doc_src_qtsvg.qdoc 0 To link against the module, add this line to your \l qmake \c .pro file: \snippet doc/src/snippets/code/doc_src_qtsvg.qdoc 1 The QtSvg module is part of the \l{Qt Full Framework Edition} and the \l{Open Source Versions of Qt}. \section1 License Information Some code for arc handling in this module is derived from code with the following license: \legalese Copyright 2002 USC/Information Sciences Institute Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted without fee, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of Information Sciences Institute not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. Information Sciences Institute makes no representations about the suitability of this software for any purpose. It is provided "as is" without express or implied warranty. INFORMATION SCIENCES INSTITUTE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL INFORMATION SCIENCES INSTITUTE BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. \endlegalese */ /*! \module QtXml \title QtXml Module \contentspage All Qt Modules \previouspage QtSvg \nextpage QtXmlPatterns \ingroup modules \brief The QtXml module provides a stream reader and writer for XML documents, and C++ implementations of SAX and DOM. To include the definitions of the module's classes, use the following directive: \snippet doc/src/snippets/code/doc_src_qtxml.qdoc 0 To link against the module, add this line to your \l qmake \c .pro file: \snippet doc/src/snippets/code/doc_src_qtxml.qdoc 1 Further XML support is provided by the \l{Qt Solutions} group who provide, for example, classes that support SOAP and MML with the Qt XML classes. This module is part of the \l{Qt Full Framework Edition} and the \l{Open Source Versions of Qt}. */ /*! \module QtXmlPatterns \title QtXmlPatterns Module \since 4.4 \contentspage All Qt Modules \previouspage QtXml \nextpage Phonon Module \ingroup modules \brief The QtXmlPatterns module provides support for XPath, XQuery, XSLT and XML Schema validation. To include the definitions of the module's classes, use the following directive: \snippet doc/src/snippets/code/doc_src_qtxmlpatterns.qdoc 0 To link against the module, add this line to your \l qmake \c .pro file: \snippet doc/src/snippets/code/doc_src_qtxmlpatterns.qdoc 1 This module is part of the \l{Qt Full Framework Edition} and the \l{Open Source Versions of Qt}. \section1 License Information The XML Schema implementation provided by this module contains the \c xml.xsd file (located in \c{src/xmlpatterns/schema/schemas}) which is licensed under the terms given below. This module is always built with XML Schema support enabled. \legalese W3C\copyright SOFTWARE NOTICE AND LICENSE This license came from: http://www.w3.org/Consortium/Legal/2002/copyright-software-20021231 This work (and included software, documentation such as READMEs, or other related items) is being provided by the copyright holders under the following license. By obtaining, using and/or copying this work, you (the licensee) agree that you have read, understood, and will comply with the following terms and conditions. Permission to copy, modify, and distribute this software and its documentation, with or without modification, for any purpose and without fee or royalty is hereby granted, provided that you include the following on ALL copies of the software and documentation or portions thereof, including modifications: 1. The full text of this NOTICE in a location viewable to users of the redistributed or derivative work.\br 2. Any pre-existing intellectual property disclaimers, notices, or terms and conditions. If none exist, the W3C Software Short Notice should be included (hypertext is preferred, text is permitted) within the body of any redistributed or derivative code.\br 3. Notice of any changes or modifications to the files, including the date changes were made. (We recommend you provide URIs to the location from which the code is derived.) THIS SOFTWARE AND DOCUMENTATION IS PROVIDED "AS IS," AND COPYRIGHT HOLDERS MAKE NO REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE OR THAT THE USE OF THE SOFTWARE OR DOCUMENTATION WILL NOT INFRINGE ANY THIRD PARTY PATENTS, COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS. COPYRIGHT HOLDERS WILL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF ANY USE OF THE SOFTWARE OR DOCUMENTATION. The name and trademarks of copyright holders may NOT be used in advertising or publicity pertaining to the software without specific, written prior permission. Title to copyright in this software and any associated documentation will at all times remain with copyright holders. \endlegalese */ /*! \page phonon-module.html \module Phonon \title Phonon Module \contentspage All Qt Modules \previouspage QtXmlPatterns \nextpage Qt3Support \ingroup modules \brief The Phonon module contains namespaces and classes for multimedia functionality. \generatelist{classesbymodule Phonon} Phonon is a cross-platform multimedia framework that enables the use of audio and video content in Qt applications. The \l{Phonon Overview} document provides an introduction to the architecture and features included in Phonon. The \l{Phonon} namespace contains a list of all classes, functions and namespaces provided by the module. Applications that use Phonon's classes need to be configured to be built against the Phonon module. The following declaration in a \c qmake project file ensures that an application is compiled and linked appropriately: \snippet doc/src/snippets/code/doc_src_phonon.qdoc 1 The Phonon module is part of the \l{Qt Full Framework Edition} and the \l{Open Source Versions of Qt}. \section1 Qt Backends Qt Backends are currently developed for Phonon version 4.1. The Phonon project has moved on and introduced new features that the Qt Backends do not implement. We have chosen not to document the part of Phonon that we do not support. Any class or function not appearing in our documentation can be considered unsupported. \section1 License Information Qt Commercial Edition licensees that wish to distribute applications that use the Phonon module need to be aware of their obligations under the GNU Lesser General Public License (LGPL). Developers using the Open Source Edition can choose to redistribute the module under the appropriate version of the GNU LGPL; version 2.1 for applications and libraries licensed under the GNU GPL version 2, or version 3 for applications and libraries licensed under the GNU GPL version 3. \legalese This file is part of the KDE project Copyright (C) 2004-2009 Matthias Kretz \BR Copyright (C) 2008 Ian Monroe \BR Copyright (C) 2007-2008 Trolltech ASA \BR Copyright (C) 2008-2009 Nokia Corporation and/or its subsidiary(-ies). \BR Contact: Nokia Corporation (qt-info@nokia.com) This library is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License version 2 as published by the Free Software Foundation. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this library; see the file COPYING.LIB. If not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. \endlegalese */ /*! \module Qt3Support \title Qt3Support Module \contentspage All Qt Modules \previouspage Phonon Module \nextpage QtDesigner \ingroup modules \keyword Qt3Support \brief The Qt3Support module provides classes that ease porting from Qt 3 to Qt 4. \warning The classes in this module are intended to be used in intermediate stages of a porting process and are not intended to be used in production code. To include the definitions of the module's classes, use the following directive: \snippet doc/src/snippets/code/doc_src_qt3support.qdoc 0 To link against the module, add this line to your \l qmake \c .pro file: \snippet doc/src/snippets/code/doc_src_qt3support.qdoc 1 \note Since this module provides compatibility classes for diverse parts of the Qt 3 API, it has dependencies on the QtCore, QtGui, QtNetwork, QtSql, and QtXml modules. This module is part of the \l{Qt Full Framework Edition} and the \l{Open Source Versions of Qt}. Most classes offered by this module are also part of the \l{Qt GUI Framework Edition}. Classes that are not available for \l{Qt GUI Framework Edition} users are marked as such in the class documentation. \sa {Porting to Qt 4} */ /*! \module QtDesigner \title QtDesigner Module \contentspage All Qt Modules \previouspage Qt3Support \nextpage QtUiTools \ingroup modules \brief The QtDesigner module provides classes that allow you to create your own custom widget plugins for Qt Designer, and classes that enable you to access Qt Designer's components. In addition, the QFormBuilder class provides the possibility of constructing user interfaces from UI files at run-time. To include the definitions of the module's classes, use the following directive: \snippet doc/src/snippets/code/doc_src_qtdesigner.qdoc 0 To link against the module, add this line to your \c qmake .pro file: \snippet doc/src/snippets/code/doc_src_qtdesigner.qdoc 1 \note These classes are part of the \l{Open Source Versions of Qt} and \l{Qt Commercial Editions}{Qt Full Framework Edition} for commercial users. */ /*! \module QtUiTools \title QtUiTools Module \since 4.1 \contentspage All Qt Modules \previouspage QtDesigner \nextpage QtHelp \ingroup modules \brief The QtUiTools module provides classes to handle forms created with Qt Designer. These forms are processed at run-time to produce dynamically-generated user interfaces. In order to generate a form at run-time, a resource file containing a UI file is needed. Applications that use the form handling classes need to be configured to be built against the QtUiTools module. This is done by including the following declaration in a \c qmake project file to ensure that the application is compiled and linked appropriately. \snippet doc/src/snippets/code/doc_src_qtuiloader.qdoc 0 A form loader object, provided by the QUiLoader class, is used to construct the user interface. This user interface can be retrieved from any QIODevice; for example, a QFile object can be used to obtain a form stored in a project's resources. The QUiLoader::load() function takes the user interface description contained in the file and constructs the form widget. To include the definitions of the module's classes, use the following directive: \snippet doc/src/snippets/code/doc_src_qtuiloader.qdoc 1 \note These classes are part of the \l{Open Source Versions of Qt} and \l{Qt Commercial Editions}{Qt Full Framework Edition} for commercial users. \sa{Calculator Builder Example}, {World Time Clock Builder Example} */ /*! \module QtHelp \title QtHelp Module \contentspage All Qt Modules \previouspage QtUiTools \nextpage QtTest \ingroup modules \brief The QtHelp module provides classes for integrating online documentation in applications. To include the definitions of the module's classes, use the following directive: \snippet doc/src/snippets/code/doc_src_qthelp.qdoc 0 To link against the module, add this line to your \l qmake \c .pro file: \snippet doc/src/snippets/code/doc_src_qthelp.qdoc 1 These classes are part of the \l{Open Source Versions of Qt} and \l{Qt Commercial Editions}{Qt Full Framework Edition} for commercial users. \section1 License Information The QtHelp module uses the CLucene indexing library to provide full-text searching capabilities for Qt Assistant and applications that use the features of QtHelp. Qt Commercial Edition licensees that wish to distribute applications that use these features of the QtHelp module need to be aware of their obligations under the GNU Lesser General Public License (LGPL). Developers using the Open Source Edition can choose to redistribute the module under the appropriate version of the GNU LGPL; version 2.1 for applications and libraries licensed under the GNU GPL version 2, or version 3 for applications and libraries licensed under the GNU GPL version 3. \legalese Copyright (C) 2003-2006 Ben van Klinken and the CLucene Team \BR Changes are Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA \endlegalese \sa {The Qt Help Framework} */ /*! \module QtTest \title QtTest Module \contentspage All Qt Modules \previouspage QtHelp \nextpage QAxContainer \ingroup modules \keyword QtTest \brief The QtTest module provides classes for unit testing Qt applications and libraries. Applications that use Qt's unit testing classes need to be configured to be built against the QtTest module. To include the definitions of the module's classes, use the following directive: \snippet doc/src/snippets/code/doc_src_qttest.qdoc 0 To link against the module, add this line to your \l qmake \c .pro file: \snippet doc/src/snippets/code/doc_src_qttest.qdoc 1 See the \l{QTestLib Manual} for a detailed introduction on how to use Qt's unit testing features with your applications. The QtTest module is part of all \l{Qt editions}. */ /*! \module QAxContainer \title QAxContainer Module \contentspage All Qt Modules \previouspage QtTest \nextpage QAxServer \ingroup modules \brief The QAxContainer module is a Windows-only extension for accessing ActiveX controls and COM objects. \section1 License Information The QAxContainer module is not covered by the \l{GNU General Public License (GPL)}, the \l{GNU Lesser General Public License (LGPL)}, or the \l{Qt Commercial Editions}{Qt Commercial License}. Instead, it is distributed under the following license. \legalese Copyright (c) 2009 Nokia Corporation and/or its subsidiary(-ies).\br All rights reserved. Contact: Nokia Corporation (qt-info@nokia.com)\br You may use this file under the terms of the BSD license as follows:\br "Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.\br * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.\br * Neither the name of Nokia Corporation and its Subsidiary(-ies) nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." \endlegalese */ /*! \module QAxServer \title QAxServer Module \contentspage All Qt Modules \previouspage QAxContainer \nextpage QtDBus module \ingroup modules \brief The QAxServer module is a Windows-only static library that you can use to turn a standard Qt binary into a COM server. \section1 License Information The QAxContainer module is not covered by the \l{GNU General Public License (GPL)}, the \l{GNU Lesser General Public License (LGPL)}, or the \l{Qt Commercial Editions}{Qt Commercial License}. Instead, it is distributed under the following license. \legalese Copyright (c) 2009 Nokia Corporation and/or its subsidiary(-ies).\br All rights reserved. Contact: Nokia Corporation (qt-info@nokia.com)\br You may use this file under the terms of the BSD license as follows:\br "Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.\br * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.\br * Neither the name of Nokia Corporation and its Subsidiary(-ies) nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." \endlegalese */ /*! \module QtDBus \title QtDBus module \contentspage All Qt Modules \previouspage QAxServer \ingroup modules \keyword QtDBus \target The QDBus compiler \brief The QtDBus module is a Unix-only library that you can use to perform Inter-Process Communication using the \l{Introduction to D-Bus}{D-Bus} protocol. Applications using the QtDBus module can provide services to other, remote applications by exporting objects, as well as use services exported by those applications by placing calls and accessing properties. The QtDBus module provides an interface that extends the Qt \l {signalsandslots.html}{Signals and Slots} mechanism, allowing one to connect to a signal emitted remotely as well as to connect a local signal to remote slot. To use this module, use the following code in your application: \snippet doc/src/snippets/code/doc_src_qtdbus.qdoc 0 If you're using qmake to build your application, you can add this line to your .pro file to make it link against the QtDBus libraries: \snippet doc/src/snippets/code/doc_src_qtdbus.qdoc 1 \note The source code for this module is located in the \c{src/qdbus} directory. When installing Qt from source, this module is built when Qt's tools are built. See the \l {Introduction to D-Bus} page for detailed information on how to use this module. This module is part of all \l{Qt editions}. */ /*! \page qtmain.html \title The qtmain Library \ingroup licensing \ingroup platform-specific \brief Describes the use and license of the qtmain helper library. qtmain is a helper library that enables the developer to write a cross-platform main() function on Windows. If you do not use \l qmake or other build tools such as CMake, then you need to link against the \c qtmain library. \section1 License Information The QAxContainer module is not covered by the \l{GNU General Public License (GPL)}, the \l{GNU Lesser General Public License (LGPL)}, or the \l{Qt Commercial Editions}{Qt Commercial License}. Instead, it is distributed under the following license. \legalese Copyright (c) 2009 Nokia Corporation and/or its subsidiary(-ies).\br All rights reserved. Contact: Nokia Corporation (qt-info@nokia.com)\br You may use this file under the terms of the BSD license as follows:\br "Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.\br * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.\br * Neither the name of Nokia Corporation and its Subsidiary(-ies) nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." \endlegalese */ /*! \page qtassistant.html \title QtAssistant This module is no longer needed. Use the QtHelp module to integrate documentation into your application. \sa {QtHelp} */