/**************************************************************************** ** ** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies). ** All rights reserved. ** Contact: Nokia Corporation (qt-info@nokia.com) ** ** This file is part of the documentation of the Qt Toolkit. ** ** $QT_BEGIN_LICENSE:BSD$ ** You may use this file under the terms of the BSD license as follows: ** ** "Redistribution and use in source and binary forms, with or without ** modification, are permitted provided that the following conditions are ** met: ** * Redistributions of source code must retain the above copyright ** notice, this list of conditions and the following disclaimer. ** * Redistributions in binary form must reproduce the above copyright ** notice, this list of conditions and the following disclaimer in ** the documentation and/or other materials provided with the ** distribution. ** * Neither the name of Nokia Corporation and its Subsidiary(-ies) nor ** the names of its contributors may be used to endorse or promote ** products derived from this software without specific prior written ** permission. ** ** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT ** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR ** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT ** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, ** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT ** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, ** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY ** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE ** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." ** $QT_END_LICENSE$ ** ****************************************************************************/ //! [0] make all //! [0] //! [1] CONFIG += qt thread debug //! [1] //! [2] CONFIG += qt QT += network xml //! [2] //! [3] QT = network xml # This will omit the core and gui modules. //! [3] //! [4] QT -= gui # Only the core module is used. //! [4] //! [5] CONFIG += link_pkgconfig PKGCONFIG += ogg dbus-1 //! [5] //! [6] LIBS += -L/usr/local/lib -lmath //! [6] //! [7] INCLUDEPATH = c:/msdev/include d:/stl/include //! [7] //! [8] qmake [mode] [options] files //! [8] //! [9] qmake -makefile [options] files //! [9] //! [10] qmake -makefile -unix -o Makefile "CONFIG+=test" test.pro //! [10] //! [11] qmake "CONFIG+=test" test.pro //! [11] //! [12] qmake -project [options] files //! [12] //! [13] qmake -spec macx-g++ //! [13] //! [14] QMAKE_LFLAGS += -F/path/to/framework/directory/ //! [14] //! [15] LIBS += -framework TheFramework //! [15] //! [16] TEMPLATE = lib CONFIG += lib_bundle //! [16] //! [17] FRAMEWORK_HEADERS.version = Versions FRAMEWORK_HEADERS.files = path/to/header_one.h path/to/header_two.h FRAMEWORK_HEADERS.path = Headers QMAKE_BUNDLE_DATA += FRAMEWORK_HEADERS //! [17] //! [18] CONFIG += x86 ppc //! [18] //! [19] qmake -spec macx-xcode project.pro //! [19] //! [20] qmake -tp vc //! [20] //! [21] qmake -tp vc -r //! [21] //! [22] CONFIG -= embed_manifest_exe //! [22] //! [23] CONFIG -= embed_manifest_dll //! [23] //! [24] make all //! [24] //! [25] build_pass:CONFIG(debug, debug|release) { unix: TARGET = $$join(TARGET,,,_debug) else: TARGET = $$join(TARGET,,,d) } //! [25] //! [26] CONFIG += qt console newstuff ... newstuff { SOURCES += new.cpp HEADERS += new.h } //! [26] //! [27] DEFINES += USE_MY_STUFF QT_DLL //! [27] //! [28] myFiles.files = path\*.png DEPLOYMENT += myFiles //! [28] //! [29] myFiles.files = path\file1.ext1 path2\file2.ext1 path3\* myFiles.path = \some\path\on\device someother.files = C:\additional\files\* someother.path = \myFiles\path2 DEPLOYMENT += myFiles someother //! [29] //! [30] DESTDIR = ../../lib //! [30] //! [31] DISTFILES += ../program.txt //! [31] //! [32] FORMS = mydialog.ui \ mywidget.ui \ myconfig.ui //! [32] //! [33] FORMS3 = my_uic3_dialog.ui \ my_uic3_widget.ui \ my_uic3_config.ui //! [33] //! [34] HEADERS = myclass.h \ login.h \ mainwindow.h //! [34] //! [35] INCLUDEPATH = c:/msdev/include d:/stl/include //! [35] //! [36] target.path += $$[QT_INSTALL_PLUGINS]/imageformats INSTALLS += target //! [36] //! [37] LEXSOURCES = lexer.l //! [37] //! [38] unix:LIBS += -L/usr/local/lib -lmath win32:LIBS += c:/mylibs/math.lib //! [38] //! [39] CONFIG += no_lflags_merge //! [39] //! [40] unix:MOC_DIR = ../myproject/tmp win32:MOC_DIR = c:/myproject/tmp //! [40] //! [41] unix:OBJECTS_DIR = ../myproject/tmp win32:OBJECTS_DIR = c:/myproject/tmp //! [41] //! [42] app { # Conditional code for 'app' template here } //! [42] //! [43] FRAMEWORK_HEADERS.version = Versions FRAMEWORK_HEADERS.files = path/to/header_one.h path/to/header_two.h FRAMEWORK_HEADERS.path = Headers QMAKE_BUNDLE_DATA += FRAMEWORK_HEADERS //! [43] //! [44] QMAKE_BUNDLE_EXTENSION = .myframework //! [44] //! [45] QMAKE_RESOURCE_FLAGS += -threshold 0 -compress 9 //! [45] //! [46] QMAKE_UIC = uic -L /path/to/plugin //! [46] //! [47] QT -= gui # Only the core module is used. //! [47] //! [48] unix:RCC_DIR = ../myproject/resources win32:RCC_DIR = c:/myproject/resources //! [48] //! [49] SOURCES = myclass.cpp \ login.cpp \ mainwindow.cpp //! [49] //! [50] SUBDIRS = kernel \ tools //! [50] //! [51] CONFIG += ordered //! [51] //! [52] TEMPLATE = app TARGET = myapp SOURCES = main.cpp //! [52] //! [53] TEMPLATE = lib SOURCES = main.cpp TARGET = mylib //! [53] //! [54] unix:UI_DIR = ../myproject/ui win32:UI_DIR = c:/myproject/ui //! [54] //! [55] unix:UI_HEADERS_DIR = ../myproject/ui/include win32:UI_HEADERS_DIR = c:/myproject/ui/include //! [55] //! [56] unix:UI_SOURCES_DIR = ../myproject/ui/src win32:UI_SOURCES_DIR = c:/myproject/ui/src //! [56] //! [57] VERSION = 1.2.3 //! [57] //! [58] YACCSOURCES = moc.y //! [58] //! [59] FILE = /etc/passwd FILENAME = $$basename(FILE) #passwd //! [59] //! [60] CONFIG = debug CONFIG += release CONFIG(release, debug|release):message(Release build!) #will print CONFIG(debug, debug|release):message(Debug build!) #no print //! [60] //! [61] contains( drivers, network ) { # drivers contains 'network' message( "Configuring for network build..." ) HEADERS += network.h SOURCES += network.cpp } //! [61] //! [62] error(An error has occurred in the configuration process.) //! [62] //! [63] exists( $(QTDIR)/lib/libqt-mt* ) { message( "Configuring for multi-threaded Qt..." ) CONFIG += thread } //! [63] //! [64] MY_VAR = one two three four MY_VAR2 = $$join(MY_VAR, " -L", -L) -Lfive MY_VAR3 = $$member(MY_VAR, 2) $$find(MY_VAR, t.*) //! [64] //! [65] LIST = 1 2 3 for(a, LIST):exists(file.$${a}):message(I see a file.$${a}!) //! [65] //! [66] include( shared.pri ) OPTIONS = standard custom !include( options.pri ) { message( "No custom build options specified" ) OPTIONS -= custom } //! [66] //! [67] isEmpty( CONFIG ) { CONFIG += qt warn_on debug } //! [67] //! [68] message( "This is a message" ) //! [68] //! [69] !build_pass:message( "This is a message" ) //! [69] //! [70] This is a test. //! [70] //! [71] system(ls /bin):HAS_BIN=FALSE //! [71] //! [72] UNAME = $$system(uname -s) contains( UNAME, [lL]inux ):message( This looks like Linux ($$UNAME) to me ) //! [72] //! [73] ARGS = 1 2 3 2 5 1 ARGS = $$unique(ARGS) #1 2 3 5 //! [73] //! [74] qmake -set VARIABLE VALUE //! [74] //! [75] qmake -query VARIABLE qmake -query #queries all current VARIABLE/VALUE pairs.. //! [75] //! [76] qmake -query "1.06a/VARIABLE" //! [76] //! [77] qmake -query "QT_INSTALL_PREFIX" //! [77] //! [78] QMAKE_VERS = $$[QMAKE_VERSION] //! [78] //! [79] documentation.path = /usr/local/program/doc documentation.files = docs/* //! [79] //! [80] INSTALLS += documentation //! [80] //! [81] unix:documentation.extra = create_docs; mv master.doc toc.doc //! [81] //! [82] target.path = /usr/local/myprogram INSTALLS += target //! [82] //! [83] CONFIG += create_prl //! [83] //! [84] CONFIG += link_prl //! [84] //! [85] QMAKE_EXT_MOC = .mymoc //! [85] //! [86] mytarget.target = .buildfile mytarget.commands = touch $$mytarget.target mytarget.depends = mytarget2 mytarget2.commands = @echo Building $$mytarget.target //! [86] //! [87] QMAKE_EXTRA_TARGETS += mytarget mytarget2 //! [87] //! [88] new_moc.output = moc_${QMAKE_FILE_BASE}.cpp new_moc.commands = moc ${QMAKE_FILE_NAME} -o ${QMAKE_FILE_OUT} new_moc.depend_command = g++ -E -M ${QMAKE_FILE_NAME} | sed "s,^.*: ,," new_moc.input = NEW_HEADERS QMAKE_EXTRA_COMPILERS += new_moc //! [88] //! [89] TARGET = myapp //! [89] //! [90] DEFINES += QT_DLL //! [90] //! [91] DEFINES -= QT_DLL //! [91] //! [92] DEFINES *= QT_DLL //! [92] //! [93] DEFINES ~= s/QT_[DT].+/QT //! [93] //! [94] EVERYTHING = $$SOURCES $$HEADERS message("The project contains the following files:") message($$EVERYTHING) //! [94] //! [95] win32:DEFINES += QT_DLL //! [95] //! [96] win32:xml { message(Building for Windows) SOURCES += xmlhandler_win.cpp } else:xml { SOURCES += xmlhandler.cpp } else { message("Unknown configuration") } //! [96] //! [97] MY_VARIABLE = value //! [97] //! [98] MY_DEFINES = $$DEFINES //! [98] //! [99] MY_DEFINES = $${DEFINES} //! [99] //! [100] TARGET = myproject_$${TEMPLATE} //! [100] //! [101] target.path = $$[QT_INSTALL_PLUGINS]/designer INSTALLS += target //! [101] //! [102] defineReplace(functionName){ #function code } //! [102] //! [103] CONFIG += myfeatures //! [103] //! [104] // Add C includes here #if defined __cplusplus // Add C++ includes here #include #include #include #include // Qt includes #include #include #include "thirdparty/include/libmain.h" #include "my_stable_class.h" ... #endif //! [104] //! [105] PRECOMPILED_HEADER = stable.h //! [105] //! [106] precompile_header:!isEmpty(PRECOMPILED_HEADER) { DEFINES += USING_PCH } //! [106] //! [107] PRECOMPILED_HEADER = window.h SOURCES = window.cpp //! [107] //! [108] SOURCES += hello.cpp //! [108] //! [109] SOURCES += hello.cpp SOURCES += main.cpp //! [109] //! [110] SOURCES = hello.cpp \ main.cpp //! [110] //! [111] HEADERS += hello.h SOURCES += hello.cpp SOURCES += main.cpp //! [111] //! [112] TARGET = helloworld //! [112] //! [113] CONFIG += qt HEADERS += hello.h SOURCES += hello.cpp SOURCES += main.cpp //! [113] //! [114] qmake -o Makefile hello.pro //! [114] //! [115] qmake -tp vc hello.pro //! [115] //! [116] CONFIG += qt debug HEADERS += hello.h SOURCES += hello.cpp SOURCES += main.cpp //! [116] //! [117] win32 { SOURCES += hellowin.cpp } //! [117] //! [118] CONFIG += qt debug HEADERS += hello.h SOURCES += hello.cpp SOURCES += main.cpp win32 { SOURCES += hellowin.cpp } unix { SOURCES += hellounix.cpp } //! [118] //! [119] !exists( main.cpp ) { error( "No main.cpp file found" ) } //! [119] //! [120] CONFIG += qt debug HEADERS += hello.h SOURCES += hello.cpp SOURCES += main.cpp win32 { SOURCES += hellowin.cpp } unix { SOURCES += hellounix.cpp } !exists( main.cpp ) { error( "No main.cpp file found" ) } //! [120] //! [121] win32 { debug { CONFIG += console } } //! [121] //! [122] CONFIG += qt debug HEADERS += hello.h SOURCES += hello.cpp SOURCES += main.cpp win32 { SOURCES += hellowin.cpp } unix { SOURCES += hellounix.cpp } !exists( main.cpp ) { error( "No main.cpp file found" ) } win32:debug { CONFIG += console } //! [122] //! [123] TEMPLATE = app DESTDIR = c:/helloapp HEADERS += hello.h SOURCES += hello.cpp SOURCES += main.cpp DEFINES += QT_DLL CONFIG += qt warn_on release //! [123] //! [124] make all //! [124] //! [125] make //! [125] //! [126] make install //! [126] //! [127] CONFIG(debug, debug|release) { mac: TARGET = $$join(TARGET,,,_debug) win32: TARGET = $$join(TARGET,,d) } //! [127] //! [128] customplugin.files = customimageplugin.dll customplugin.files += c:\myplugins\othercustomimageplugin.dll customplugin.path = imageformats dynamiclibrary.files = mylib.dll helper.exe dynamiclibrary.path = \sys\bin globalplugin.files = someglobalimageplugin.dll globalplugin.path = \resource\qt\plugins\imageformats DEPLOYMENT += customplugin dynamiclibrary globalplugin //! [128] //! [129] TARGET.EPOCALLOWDLLDATA = 1 //! [129] //! [130] TARGET.EPOCHEAPSIZE = 10000 10000000 TARGET.EPOCSTACKSIZE = 0x8000 //! [130] //! [131] QMAKE_CXXFLAGS.CW += -O2 QMAKE_CXXFLAGS.ARMCC += -O0 //! [131] //! [132] TARGET.UID2 = 0x00000001 TARGET.UID3 = 0x00000002 TARGET.SID = 0x00000003 TARGET.VID = 0x00000004 //! [132] //! [133] TARGET.CAPABILITY += AllFiles //! [133] //! [134] TARGET.CAPABILITY = ALL -TCB -DRM -AllFiles //! [134] //! [135] TARGET.EPOCHEAPSIZE = 10000 10000000 //! [135] //! [136] TARGET.EPOCSTACKSIZE = 0x8000 //! [136] //! [137] MMP_RULES += "DEFFILE hello.def" //! [137] //! [138] myBlock = \ "START RESOURCE foo.rss" \ "TARGET bar" \ "TARGETPATH private\10001234" \ "HEADER" \ "LANG 01" \ "UID 0x10002345 0x10003456" \ "END" MMP_RULES += myBlock //! [138] //! [139] myIfdefBlock = \ "$${LITERAL_HASH}ifdef WINSCW" \ "DEFFILE hello_winscw.def" \ "$${LITERAL_HASH}endif" MMP_RULES += myIfdefBlock //! [139] //! [140] somelib.files = somelib.dll somelib.path = \sys\bin somelib.pkg_prerules = "(0x12345678), 2, 2, 0, {\"Some Package\"}" \ "(0x87654321), 1, *, * ~ 2, 2, 0, {\"Some Other Package\"}" justdep.pkg_prerules = "(0xAAAABBBB), 0, 2, 0, {\"My Framework\"}" DEPLOYMENT += somelib justdep //! [140] //! [141] default_deployment.pkg_prerules -= pkg_platform_dependencies my_deployment.pkg_prerules = "[0x11223344],0,0,0,{\"SomeSpecificDeviceID\"}" DEPLOYMENT += my_deployment //! [141] //! [142] DEPLOYMENT_PLUGIN += qjpeg //! [142] //! [143] myextension = \ "start extension myextension" \ "$${LITERAL_HASH}if defined(WINSCW)" \ "option MYOPTION foo" \ "$${LITERAL_HASH}endif" \ "option MYOPTION bar" \ "end" BLD_INF_RULES.prj_extensions += myextension //! [143] //! [144] RSS_RULES += "hidden = KAppIsHidden;" //! [144] //! [145] myrssrules = \ "hidden = KAppIsHidden;" \ "launch = KAppLaunchInBackground;" \ RSS_RULES += myrssrules //! [145] //! [146] DEPLOYMENT.installer_header = 0x12345678 //! [146] //! [147] DEPLOYMENT.installer_header = "$${LITERAL_HASH}{\"My Application Installer\"},(0x12345678),1,0,0" //! [147] //! [148] # Set conditional libraries LIB.MARM = "LIBRARY myarm.lib" LIB.WINSCW = "LIBRARY mywinscw.lib" LIB.default = "LIBRARY mydefault.lib" # Add the conditional MMP rules MYCONDITIONS = MARM WINSCW MYVARIABLES = LIB addMMPRules(MYCONDITIONS, MYVARIABLES) //! [148] //! [149] SUBDIRS += my_executable my_library my_executable.subdir = app my_executable.depends = my_library my_library.subdir = lib //! [149] //! [150] symbian { SUBDIRS += emulator_dll emulator_dll.condition = WINSCW } //! [150] //! [151] RSS_RULES.service_list += "uid = 0x12345678; datatype_list = \{\}; opaque_data = r_my_icon;" RSS_RULES.footer +="RESOURCE CAPTION_AND_ICON_INFO r_my_icon \{ icon_file =\"$$PWD/my_icon.svg\"; \}" //! [151] //! [152] my_exports = \ "foo.h /epoc32/include/mylib/foo.h" \ "bar.h /epoc32/include/mylib/bar.h" BLD_INF_RULES.prj_exports += my_exports //! [152] //! [153] my_note.pkg_postrules.installer = "\"myinstallnote.txt\" - \"\", FILETEXT, TEXTCONTINUE" DEPLOYMENT += my_note //! [153] //! [154] DEPLOYMENT -= default_bin_deployment default_resource_deployment default_reg_deployment //! [154] //! [155] default_bin_deployment.flags += FILERUN RUNINSTALL dep_note.files = install_note.txt dep_note.flags = FILETEXT TEXTEXIT DEPLOYMENT += dep_note //! [155] //! [156] DEPLOYMENT.display_name = My Qt App //! [156]