/**************************************************************************** ** ** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). ** All rights reserved. ** Contact: Nokia Corporation (qt-info@nokia.com) ** ** This file is part of the documentation of the Qt Toolkit. ** ** $QT_BEGIN_LICENSE:LGPL$ ** No Commercial Usage ** This file contains pre-release code and may not be distributed. ** You may use this file in accordance with the terms and conditions ** contained in the Technology Preview License Agreement accompanying ** this package. ** ** GNU Lesser General Public License Usage ** Alternatively, this file may be used under the terms of the GNU Lesser ** General Public License version 2.1 as published by the Free Software ** Foundation and appearing in the file LICENSE.LGPL included in the ** packaging of this file. Please review the following information to ** ensure the GNU Lesser General Public License version 2.1 requirements ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. ** ** In addition, as a special exception, Nokia gives you certain additional ** rights. These rights are described in the Nokia Qt LGPL Exception ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package. ** ** If you have questions regarding the use of this file, please contact ** Nokia at qt-info@nokia.com. ** ** ** ** ** ** ** ** ** $QT_END_LICENSE$ ** ****************************************************************************/ /*! \page xmlprocessing.html \title Using XML Technologies \previouspage Working with the DOM Tree \contentspage XML Processing \keyword Patternist \brief An overview of Qt's support for using XML technologies in Qt programs. \tableofcontents \section1 Introduction XQuery is a language for traversing XML documents to select and aggregate items of interest and to transform them for output as XML or some other format. XPath is the \e{element selection} part of XQuery. The QtXmlPatterns module supports using \l{http://www.w3.org/TR/xquery} {XQuery 1.0} and \l{http://www.w3.org/TR/xpath20} {XPath 2.0} in Qt applications, for querying XML data \e{and} for querying \l{QAbstractXmlNodeModel} {non-XML data that can be modeled to look like XML}. The QtXmlPatterns module is included in the \l{Qt Full Framework Edition}, and the \l{Open Source Versions of Qt}. Readers who are not familiar with the XQuery/XPath language can read \l {A Short Path to XQuery} for a brief introduction. \section1 Advantages of using QtXmlPatterns and XQuery The XQuery/XPath language simplifies data searching and transformation tasks by eliminating the need for doing a lot of C++ or Java procedural programming for each new query task. Here is an XQuery that constructs a bibliography of the contents of a library: \target qtxmlpatterns_example_query \quotefile snippets/patternist/introductionExample.xq First, the query opens a \c{} element in the output. The \l{xquery-introduction.html#using-path-expressions-to-match-select-items} {embedded path expression} then loads the XML document describing the contents of the library (\c{library.xml}) and begins the search. For each \c{} element it finds, where the publisher was Addison-Wesley and the publication year was after 1991, it creates a new \c{} element in the output as a child of the open \c{} element. Each new \c{} element gets the book's title as its contents and the book's publication year as an attribute. Finally, the \c{} element is closed. The advantages of using QtXmlPatterns and XQuery in your Qt programs are summarized as follows: \list \o \bold{Ease of development}: All the C++ programming required to perform data query tasks can be replaced by a simple XQuery like the example above. \o \bold{Comprehensive functionality}: The \l{http://www.w3.org/TR/xquery/#id-expressions} {expression syntax} and rich set of \l{http://www.w3.org/TR/xpath-functions} {functions and operators} provided by XQuery are sufficient for performing any data searching, selecting, and sorting tasks. \o \bold{Conformance to standards}: Conformance to all applicable XML and XQuery standards ensures that QtXmlPatterns can always process XML documents generated by other conformant applications, and that XML documents created with QtXmlPatterns can be processed by other conformant applications. \o \bold{Maximal flexibility} The QtXmlPatterns module can be used to query XML data \e{and} non-XML data that can be \l{QAbstractXmlNodeModel} {modeled to look like XML}. \endlist \section1 Using the QtXmlPatterns module There are two ways QtXmlPatterns can be used to evaluate queries. You can run the query engine in your Qt application using the QtXmlPatterns C++ API, or you can run the query engine from the command line using Qt's \c{xmlpatterns} command line utility. \section2 Running the query engine from your Qt application If we save the example XQuery shown above in a text file (e.g. \c{myquery.xq}), we can run it from a Qt application using a standard QtXmlPatterns code sequence: \snippet doc/src/snippets/code/src_xmlpatterns_api_qxmlquery.cpp 3 First construct a QFile for the text file containing the XQuery (\c{myquery.xq}). Then create an instance of QXmlQuery and call its \l{QXmlQuery::}{setQuery()} function to load and parse the XQuery file. Then create an \l{QXmlSerializer} {XML serializer} to output the query's result set as unformatted XML. Finally, call the \l{QXmlQuery::}{evaluateTo()} function to evaluate the query and serialize the results as XML. \note If you compile Qt yourself, the QtXmlPatterns module will \e{not} be built if exceptions are disabled, or if you compile Qt with a compiler that doesn't support member templates, e.g., MSVC 6. See the QXmlQuery documentation for more information about the QtXmlPatterns C++ API. \section2 Running the query engine from the command line utility \e xmlpatterns is a command line utility for running XQueries. It expects the name of a file containing the XQuery text. \snippet doc/src/snippets/code/doc_src_qtxmlpatterns.qdoc 2 The XQuery in \c{myQuery.xq} will be evaluated and its output written to \c stdout. Pass the \c -help switch to get the list of input flags and their meanings. xmlpatterns can be used in scripting. However, the descriptions and messages it outputs were not meant to be parsed and may be changed in future releases of Qt. \target QtXDM \section1 The XQuery Data Model XQuery represents data items as \e{atomic values} or \e{nodes}. An atomic value is a value in the domain of one of the \l{http://www.w3.org/TR/xmlschema-2/#built-in-datatypes} {built-in datatypes} defined in \l{http://www.w3.org/TR/xmlschema-2} {Part 2} of the W3C XML Schema. A node is normally an XML element or attribute, but when non-XML data is \l{QAbstractXmlNodeModel} {modeled to look like XML}, a node can also represent a non-XML data items. When you run an XQuery using the C++ API in a Qt application, you will often want to bind program variables to $variables in the XQuery. After the query is evaluated, you will want to interpret the sequence of data items in the result set. \section2 Binding program variables to XQuery variables When you want to run a parameterized XQuery from your Qt application, you will need to \l{QXmlQuery::bindVariable()} {bind variables} in your program to $name variables in your XQuery. Suppose you want to parameterize the bibliography XQuery in the example above. You could define variables for the catalog that contains the library (\c{$file}), the publisher name (\c{$publisher}), and the year of publication (\c{$year}): \target qtxmlpatterns_example_query2 \quotefile snippets/patternist/introExample2.xq Modify the QtXmlPatterns code to use one of the \l{QXmlQuery::} {bindVariable()} functions to bind a program variable to each XQuery $variable: \snippet doc/src/snippets/code/src_xmlpatterns_api_qxmlquery.cpp 4 Each program variable is passed to QtXmlPatterns as a QVariant of the type of the C++ variable or constant from which it is constructed. Note that QtXmlPatterns assumes that the type of the QVariant in the bindVariable() call is the correct type, so the $variable it is bound to must be used in the XQuery accordingly. The following table shows how QVariant types are mapped to XQuery $variable types: \table \header \o QVariant type \o XQuery $variable type \row \o QVariant::LongLong \o \c xs:integer \row \o QVariant::Int \o \c xs:integer \row \o QVariant::UInt \o \c xs:nonNegativeInteger \row \o QVariant::ULongLong \o \c xs:unsignedLong \row \o QVariant::String \o \c xs:string \row \o QVariant::Double \o \c xs:double \row \o QVariant::Bool \o \c xs:boolean \row \o QVariant::Double \o \c xs:decimal \row \o QVariant::ByteArray \o \c xs:base64Binary \row \o QVariant::StringList \o \c xs:string* \row \o QVariant::Url \o \c xs:string \row \o QVariant::Date \o \c xs:date. \row \o QVariant::DateTime \o \c xs:dateTime \row \o QVariant::Time. \o \c xs:time. (see \l{Binding To Time}{Binding To QVariant::Time} below) \row \o QVariantList \o (see \l{Binding To QVariantList}{Binding To QVariantList} below) \endtable A type not shown in the table is not supported and will cause undefined XQuery behavior or a $variable binding error, depending on the context in the XQuery where the variable is used. \target Binding To Time \section3 Binding To QVariant::Time Because the instance of QTime used in QVariant::Time does not include a zone offset, an instance of QVariant::Time should not be bound to an XQuery variable of type \c xs:time, unless the QTime is UTC. When binding a non-UTC QTime to an XQuery variable, it should first be passed as a string, or converted to a QDateTime with an arbitrary date, and then bound to an XQuery variable of type \c xs:dateTime. \target Binding To QVariantList \section3 Binding To QVariantList A QVariantList can be bound to an XQuery $variable. All the \l{QVariant}s in the list must be of the same atomic type, and the $variable the variant list is bound to must be of that same atomic type. If the QVariants in the list are not all of the same atomic type, the XQuery behavior is undefined. \section2 Interpreting XQuery results When the results of an XQuery are returned in a sequence of \l {QXmlResultItems} {result items}, atomic values in the sequence are treated as instances of QVariant. Suppose that instead of serializing the results of the XQuery as XML, we process the results programatically. Modify the standard QtXmlPatterns code sequence to call the overload of QXmlQuery::evaluateTo() that populates a sequence of \l {QXmlResultItems} {result items} with the XQuery results: \snippet doc/src/snippets/code/src_xmlpatterns_api_qxmlquery.cpp 5 Iterate through the \l {QXmlResultItems} {result items} and test each QXmlItem to see if it is an atomic value or a node. If it is an atomic value, convert it to a QVariant with \l {QXmlItem::} {toAtomicValue()} and switch on its \l {QVariant::type()} {variant type} to handle all the atomic values your XQuery might return. The following table shows the QVariant type to expect for each atomic value type (or QXmlName): \table \header \o XQuery result item type \o QVariant type returned \row \o \c xs:QName \o QXmlName (see \l{Handling QXmlNames}{Handling QXmlNames} below) \row \o \c xs:integer \o QVariant::LongLong \row \o \c xs:string \o QVariant::String \row \o \c xs:string* \o QVariant::StringList \row \o \c xs:double \o QVariant::Double \row \o \c xs:float \o QVariant::Double \row \o \c xs:boolean \o QVariant::Bool \row \o \c xs:decimal \o QVariant::Double \row \o \c xs:hexBinary \o QVariant::ByteArray \row \o \c xs:base64Binary \o QVariant::ByteArray \row \o \c xs:gYear \o QVariant::DateTime \row \o \c xs:gYearMonth \o QVariant::DateTime \row \o \c xs:gMonthDay \o QVariant::DateTime \row \o \c xs:gDay \o QVariant::DateTime \row \o \c xs:gMonth \o QVariant::DateTime \row \o \c xs:anyURI \o QVariant::Url \row \o \c xs:untypedAtomic \o QVariant::String \row \o \c xs:ENTITY \o QVariant::String \row \o \c xs:date \o QVariant::DateTime \row \o \c xs:dateTime \o QVariant::DateTime \row \o \c xs:time \o (see \l{xstime-not-mapped}{No mapping for xs:time} below) \endtable \target Handling QXmlNames \section3 Handling QXmlNames If your XQuery can return atomic value items of type \c{xs:QName}, they will appear in your QXmlResultItems as instances of QXmlName. Since the QVariant class does not support the QXmlName class directly, extracting them from QXmlResultItems requires a bit of slight-of-hand using the \l{QMetaType} {Qt metatype system}. We must modify our example to use a couple of template functions, a friend of QMetaType (qMetaTypeId()) and a friend of QVariant (qVariantValue()): \snippet doc/src/snippets/code/src_xmlpatterns_api_qxmlquery.cpp 6 To access the strings in a QXmlName returned by an \l{QXmlQuery::evaluateTo()} {XQuery evaluation}, the QXmlName must be accessed with the \l{QXmlNamePool} {name pool} from the instance of QXmlQuery that was used for the evaluation. \target xstime-not-mapped \section3 No mapping for xs:time An instance of \c xs:time can't be represented correctly as an instance of QVariant::Time, unless the \c xs:time is a UTC time. This is because xs:time has a zone offset (0 for UTC) in addition to the time value, which the QTime in QVariant::Time does not have. This means that if an XQuery tries to return an atomic value of type \c xs:time, an invalid QVariant will be returned. A query can return an atomic value of type xs:time by either converting it to an \c xs:dateTime with an arbitrary date, or to an \c xs:string. \section1 Using XQuery with Non-XML Data Although the XQuery language was designed for querying XML, with QtXmlPatterns one can use XQuery for querying any data that can be modeled to look like XML. Non-XML data is modeled to look like XML by loading it into a custom subclass of QAbstractXmlNodeModel, where it is then presented to the QtXmlPatterns XQuery engine via the same API the XQuery engine uses for querying XML. When QtXmlPatterns loads and queries XML files and produces XML output, it can always load the XML data into its default XML node model, where it can be traversed efficiently. The XQuery below traverses the product orders found in the XML file \e myOrders.xml to find all the skin care product orders and output them ordered by shipping date. \quotefile snippets/patternist/introAcneRemover.xq QtXmlPatterns can be used out of the box to perform this query, provided \e myOrders.xml actually contains well-formed XML. It can be loaded directly into the default XML node model and traversed. But suppose we want QtXmlPatterns to perform queries on the hierarchical structure of the local file system. The default XML node model in QtXmlPatterns is not suitable for navigating the file system, because there is no XML file to load that contains a description of it. Such an XML file, if it existed, might look something like this: \quotefile snippets/patternist/introFileHierarchy.xml The \l{File System Example}{File System Example} does exactly this. There is no such file to load into the default XML node model, but one can write a subclass of QAbstractXmlNodeModel to represent the file system. This custom XML node model, once populated with all the directory and file descriptors obtained directly from the system, presents the complete file system hierarchy to the query engine via the same API used by the default XML node model to present the contents of an XML file. In other words, once the custom XML node model is populated, it presents the file system to the query engine as if a description of it had been loaded into the default XML node model from an XML file like the one shown above. Now we can write an XQuery to find all the XML files and parse them to find the ones that don't contain well-formed XML. \quotefromfile snippets/patternist/introNavigateFS.xq \skipto \printuntil Without QtXmlPatterns, there is no simple way to solve this kind of problem. You might do it by writing a C++ program to traverse the file system, sniff out all the XML files, and submit each one to an XML parser to test that it contains valid XML. The C++ code required to write that program will probably be more complex than the C++ code required to subclass QAbstractXmlNodeModel, but even if the two are comparable, your custom C++ program can be used only for that one task, while your custom XML node model can be used by any XQuery that must navigate the file system. The general approach to using XQuery to perform queries on non-XML data has been a three step process. In the first step, the data is loaded into a non-XML data model. In the second step, the non-XML data model is serialized as XML and output to XML (text) files. In the final step, an XML tool loads the XML files into a second, XML data model, where the XQueries can be performed. The development cost of implementing this process is often high, and the three step system that results is inefficient because the two data models must be built and maintained separately. With QtXmlPatterns, subclassing QAbstractXmlNodeModel eliminates the transformation required to convert the non-XML data model to the XML data model, because there is only ever one data model required. The non-XML data model presents the non-XML data to the query engine via the XML data model API. Also, since the query engine uses the API to access the QAbstractXmlNodeModel, the data model subclass can construct the elements, attributes and other data on demand, responding to the query's specific requests. This can greatly improve efficiency, because it means the entire model might not have to be built. For example, in the file system model above, it is not necessary to build an instance for a whole XML file representing the whole file system. Instead nodes are created on demand, which also likely is a small subset of the file system. Examples of other places where XQuery could be used in QtXmlPatterns to query non-XML data: \list \o The internal representation for word processor documents \o The set of dependencies for a software build system \o The hierarchy (or graph) that links a set of HTML documents from a web crawler \o The images and meta-data in an image collection \o The set of D-Bus interfaces available in a system \o A QObject hierarchy, as seen in the \l{QObject XML Model Example} {QObject XML Model example}. \endlist See the QAbstractXmlNodeModel documentation for information about how to implement custom XML node models. \section1 More on using QtXmlPatterns with non-XML Data Subclassing QAbstractXmlNodeModel to let the query engine access non-XML data by the same API it uses for XML is the feature that enables QtXmlPatterns to query non-XML data with XQuery. It allows XQuery to be used as a mapping layer between different non-XML node models or between a non-XML node model and the built-in XML node model. Once the subclass(es) of QAbstractXmlNodeModel have been written, XQuery can be used to select a set of elements from one node model, transform the selected elements, and then write them out, either as XML using QXmlQuery::evaluateTo() and QXmlSerializer, or as some other format using a subclass of QAbstractXmlReceiver. Consider a word processor application that must import and export data in several different formats. Rather than writing a lot of C++ code to convert each input format to an intermediate form, and more C++ code to convert the intermediate form back to each output format, one can implement a solution based on QtXmlPatterns that uses simple XQueries to transform each XML or non-XML format (e.g. MathFormula.xml below) to the intermediate form (e.g. the DocumentRepresentation node model class below), and more simple XQueries to transform the intermediate form back to each XML or non-XML format. \image patternist-wordProcessor.png Because CSV files are not XML, a subclass of QAbstractXmlNodeModel is used to present the CSV data to the XQuery engine as if it were XML. What are not shown are the subclasses of QAbstractXmlReceiver that would then send the selected elements into the DocumentRepresentation node model, and the subclasses of QAbstractXmlNodeModel that would ultimately write the output files in each format. \section1 Security Considerations \section2 Code Injection XQuery is vulnerable to \l{http://en.wikipedia.org/wiki/Code_injection} {code injection attacks} in the same way as the SQL language. If an XQuery is constructed by concatenating strings, and the strings come from user input, the constructed XQuery could be malevolent. The best way to prevent code injection attacks is to not construct XQueries from user-written strings, but only accept user data input using QVariant and variable bindings. See QXmlQuery::bindVariable(). The articles \l{http://www.ibm.com/developerworks/xml/library/x-xpathinjection.html} {Avoid the dangers of XPath injection}, by Robi Sen and \l{http://www.packetstormsecurity.org/papers/bypass/Blind_XPath_Injection_20040518.pdf} {Blind XPath Injection}, by Amit Klein, discuss the XQuery code injection problem in more detail. \section2 Denial of Service Attacks Applications using QtXmlPatterns are subject to the same limitations of software as other systems. Generally, these can not be checked. This means QtXmlPatterns does not prevent rogue queries from consuming too many resources. For example, a query could take too much time to execute or try to transfer too much data. A query could also do too much recursion, which could crash the system. XQueries can do these things accidentally, but they can also be done as deliberate denial of service attacks. \section1 Features and Conformance \section2 XQuery 1.0 QtXmlPatterns aims at being a \l{http://www.w3.org/TR/xquery/#id-xquery-conformance} {conformant XQuery processor}. It adheres to \l{http://www.w3.org/TR/xquery/#id-minimal-conformance} {Minimal Conformance} and supports the \l{http://www.w3.org/TR/xquery/#id-serialization-feature} {Serialization Feature} and the \l{http://www.w3.org/TR/xquery/#id-full-axis-feature} {Full Axis Feature}. QtXmlPatterns currently passes 97% of the tests in the \l{http://www.w3.org/XML/Query/test-suite} {XML Query Test Suite}. Areas where conformance may be questionable and where behavior may be changed in future releases include: \list \o Some corner cases involving namespaces and element constructors are incorrect. \o XPath is a subset of XQuery and the implementation of QtXmlPatterns uses XPath 2.0 with XQuery 1.0. \endlist The specifications discusses conformance further: \l{http://www.w3.org/TR/xquery/}{XQuery 1.0: An XML Query Language}. W3C's XQuery testing effort can be of interest as well, \l{http://www.w3.org/XML/Query/test-suite/}{XML Query Test Suite}. Currently \c fn:collection() does not access any data set, and there is no API for providing data through the collection. As a result, evaluating \c fn:collection() returns the empty sequence. We intend to provide functionality for this in a future release of Qt. Only queries encoded in UTF-8 are supported. \section2 XSLT 2.0 Partial support for XSLT was introduced in Qt 4.5. Future releases of QtXmlPatterns will aim to support these XSLT features: \list \o Basic XSLT 2.0 processor \o Serialization feature \o Backwards Compatibility feature \endlist For details, see \l{http://www.w3.org/TR/xslt20/#conformance}{XSL Transformations (XSLT) Version 2.0, 21 Conformance}. \note In this release, XSLT support is considered experimental. Unsupported or partially supported XSLT features are documented in the following table. The implementation of XSLT in Qt 4.5 can be seen as XSLT 1.0 but with the data model of XPath 2.0 and XSLT 2.0, and using the using the functionality of XPath 2.0 and its accompanying function library. When QtXmlPatterns encounters an unsupported or partially support feature, it will either report a syntax error or silently continue, unless otherwise noted in the table. The implementation currently passes 42% of W3C's XSLT test suite, which focus on features introduced in XSLT 2.0. \table \header \o XSL Feature \o Support Status \row \o \c xsl:key and \c fn:key() \o not supported \row \o \c xsl:include \o not supported \row \o \c xsl:import \o not supported \row \o \c xsl:copy \o The \c copy-namespaces and \c inherit-namespaces attributes have no effect. For copied comments, attributes and processing instructions, the copy has the same node identity as the original. \row \o \c xsl:copy-of \o The \c copy-namespaces attribute has no effect. \row \o \c fn:format-number() \o not supported \row \o \c xsl:message \o not supported \row \o \c xsl:use-when \o not supported \row \o \c Tunnel Parameters \o not supported \row \o \c xsl:attribute-set \o not supported \row \o \c xsl:decimal-format \o not supported \row \o \c xsl:fallback \o not supported \row \o \c xsl:apply-imports \o not supported \row \o \c xsl:character-map \o not supported \row \o \c xsl:number \o not supported \row \o \c xsl:namespace-alias \o not supported \row \o \c xsl:output \o not supported \row \o \c xsl:output-character \o not supported \row \o \c xsl:preserve-space \o not supported \row \o \c xsl:result-document \o not supported \row \o Patterns \o Complex patterns or patterns with predicates have issues. \row \o \c 2.0 Compatibility Mode \o Stylesheets are interpreted as XSLT 2.0 stylesheets, even if the \c version attribute is in the XSLT source is 1.0. In other words, the version attribute is ignored. \row \o Grouping \o \c fn:current-group(), \c fn:grouping-key() and \c xsl:for-each-group. \row \o Regexp elements \o \c xsl:analyze-string, \c xsl:matching-substring, \c xsl:non-matching-substring, and \c fn:regex-group() \row \o Date & Time formatting \o \c fn:format-dateTime(), \c fn:format-date() and fn:format-time(). \row \o XPath Conformance \o Since XPath is a subset of XSLT, its issues are in affect too. \endtable The QtXmlPatterns implementation of the XPath Data Model does not include entities (due to QXmlStreamReader not reporting them). This means that functions \c unparsed-entity-uri() and \c unparsed-entity-public-id() always return negatively. \section2 XPath 2.0 Since XPath 2.0 is a subset of XQuery 1.0, XPath 2.0 is supported. Areas where conformance may be questionable and, consequently, where behavior may be changed in future releases include: \list \o Regular expression support is currently not conformant but follows Qt's QRegExp standard syntax. \o Operators for \c xs:time, \c xs:date, and \c xs:dateTime are incomplete. \o Formatting of very large or very small \c xs:double, \c xs:float, and \c xs:decimal values may be incorrect. \endlist \section2 xml:id Processing of XML files supports \c xml:id. This allows elements that have an attribute named \c xml:id to be looked up efficiently with the \c fn:id() function. See \l{http://www.w3.org/TR/xml-id/}{xml:id Version 1.0} for details. \section2 XML Schema 1.0 There are two ways QtXmlPatterns can be used to validate schemas: You can use the C++ API in your Qt application using the classes QXmlSchema and QXmlSchemaValidator, or you can use the command line utility named xmlpatternsvalidator (located in the "bin" directory of your Qt build). The QtXmlPatterns implementation of XML Schema validation supports the schema specification version 1.0 in large parts. Known problems of the implementation and areas where conformancy may be questionable are: \list \o Large \c minOccurs or \c maxOccurs values or deeply nested ones require huge amount of memory which might cause the system to freeze. Such a schema should be rewritten to use \c unbounded as value instead of large numbers. This restriction will hopefully be fixed in a later release. \o Comparison of really small or large floating point values might lead to wrong results in some cases. However such numbers should not be relevant for day-to-day usage. \o Regular expression support is currently not conformant but follows Qt's QRegExp standard syntax. \o Identity constraint checks can not use the values of default or fixed attribute definitions. \endlist \section2 Resource Loading When QtXmlPatterns loads an XML resource, e.g., using the \c fn:doc() function, the following schemes are supported: \table \header \o Scheme Name \o Description \row \o \c file \o Local files. \row \o \c data \o The bytes are encoded in the URI itself. e.g., \c data:application/xml,%3Ce%2F%3E is \c . \row \o \c ftp \o Resources retrieved via FTP. \row \o \c http \o Resources retrieved via HTTP. \row \o \c https \o Resources retrieved via HTTPS. This will succeed if no SSL errors are encountered. \row \o \c qrc \o Qt Resource files. Expressing it as an empty scheme, :/..., is not supported. \endtable \section2 XML XML 1.0 and XML Namespaces 1.0 are supported, as opposed to the 1.1 versions. When a strings is passed to a query as a QString, the characters must be XML 1.0 characters. Otherwise, the behavior is undefined. This is not checked. URIs are first passed to QAbstractUriResolver. Check QXmlQuery::setUriResolver() for possible rewrites. */ /*! \namespace QPatternist \brief The QPatternist namespace contains classes and functions required by the QtXmlPatterns module. \internal */