/****************************************************************************
**
** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
** Contact: Qt Software Information (qt-info@nokia.com)
**
** This file is part of the QtDeclarative module of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:LGPL$
** No Commercial Usage
** This file contains pre-release code and may not be distributed.
** You may use this file in accordance with the terms and conditions
** contained in the either Technology Preview License Agreement or the
** Beta Release License Agreement.
**
** GNU Lesser General Public License Usage
** Alternatively, this file may be used under the terms of the GNU Lesser
** General Public License version 2.1 as published by the Free Software
** Foundation and appearing in the file LICENSE.LGPL included in the
** packaging of this file.  Please review the following information to
** ensure the GNU Lesser General Public License version 2.1 requirements
** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
**
** In addition, as a special exception, Nokia gives you certain
** additional rights. These rights are described in the Nokia Qt LGPL
** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
** package.
**
** GNU General Public License Usage
** Alternatively, this file may be used under the terms of the GNU
** General Public License version 3.0 as published by the Free Software
** Foundation and appearing in the file LICENSE.GPL included in the
** packaging of this file.  Please review the following information to
** ensure the GNU General Public License version 3.0 requirements will be
** met: http://www.gnu.org/copyleft/gpl.html.
**
** If you are unsure which license is appropriate for your use, please
** contact the sales department at qt-sales@nokia.com.
** $QT_END_LICENSE$
**
****************************************************************************/

#include "gfxeasing.h"
#include <math.h>
#include <QHash>
#include <QPainter>
#include <QVariant>
#include <QDebug>
#include <QStringList>
#include <QMouseEvent>
#include "gfxtimeline.h"


QT_BEGIN_NAMESPACE
typedef QHash<QString, qreal> GfxEasingProperties;
class GfxEasingFunction
{
public:
    virtual ~GfxEasingFunction() {}
    virtual float value(float t, float b, float c, float d) = 0;
    virtual GfxEasingFunction *copy() const = 0;
};

#include "../3rdparty/easing.cpp"

struct ElasticEase : public GfxEasingFunction
{
    enum Type { In, Out };
    ElasticEase(Type t) : _t(t), _p(0.0f), _a(0.0f) {}

    Type _t;
    qreal _p;
    qreal _a;

    GfxEasingFunction *copy() const
    {
        ElasticEase *rv = new ElasticEase(_t);
        rv->_p = _p;
        rv->_a = _a;
        return rv;
    }

    float value(float t, float b, float c, float d)
    {
        if (t==0) return b;
        float t_adj = (float)t / (float)d;
        if (t_adj==1) return b+c;

        qreal p = _p?_p:(d * 0.3f);

        qreal a;
        qreal s;

        if(!_a || _a < ::fabs(c)) {
            a = c;
            s = p / 4.0f;
        } else {
            a = _a;
            s = p / (2 * M_PI) * ::asin(c / a);
        }

        if(_t == In) 
            t_adj -= 1.0f;

        return (a*::pow(2,-10*t_adj) * ::sin( (t_adj*d-s)*(2*M_PI)/p ) + c + b);
    }
};

struct BounceEase : public GfxEasingFunction
{
    enum Type { In, Out };
    BounceEase(Type t) : _t(t), _a(-1.0) {}

    Type _t;
    qreal _a;

    GfxEasingFunction *copy() const
    {
        BounceEase *rv = new BounceEase(_t);
        rv->_t = _t;
        rv->_a = _a;
        return rv;
    }

    float value(float t, float b, float c, float d)
    {
        if(In == _t)
            return c - bounce(d - t, 0, c, d) + b;
        else
            return bounce(t, b, c, d);
    }

    float bounce(float t, float b, float c, float d)
    {
        float t_adj = (float)t / (float)d;
        float amp = (_a == -1.0)?c:_a;
        if ((t_adj) < (1/2.75)) {
            if(c == 0. && _a != -1.0) {
                t_adj -= (0.5f/2.75f);
                return -amp * (1. - (30.25*t_adj*t_adj)) + b;
            } else {
                return c*(7.5625*t_adj*t_adj) + b;
            }
        } else if (t_adj < (2/2.75)) {
            t_adj -= (1.5f/2.75f);
            return -amp * (1. - (7.5625*t_adj*t_adj + .75)) + (b + c);
        } else if (t_adj < (2.5/2.75)) {
            t_adj -= (2.25f/2.75f);
            return -amp * (1. - (7.5625*t_adj*t_adj + .9375)) + (b + c);
        } else {
            t_adj -= (2.65f/2.75f);
            return -amp * (1. - (7.5625*t_adj*t_adj + .984375)) + (b + c);
        }
    }
};

static GfxEasingFunction *easeInElasticC(const GfxEasingProperties &p)
{
    ElasticEase *rv = new ElasticEase(ElasticEase::In);
    rv->_p = p[QLatin1String("period")];
    rv->_a = p[QLatin1String("amplitude")];
    return rv;
}


static GfxEasingFunction *easeOutElasticC(const GfxEasingProperties &p)
{
    ElasticEase *rv = new ElasticEase(ElasticEase::Out);
    rv->_p = p[QLatin1String("period")];
    rv->_a = p[QLatin1String("amplitude")];
    return rv;
}

static GfxEasingFunction *easeOutBounceC(const GfxEasingProperties &p)
{
    BounceEase *rv = new BounceEase(BounceEase::Out);
    rv->_a = p[QLatin1String("amplitude")];
    return rv;
}

static GfxEasingFunction *easeInBounceC(const GfxEasingProperties &p)
{
    BounceEase *rv = new BounceEase(BounceEase::Out);
    rv->_a = p[QLatin1String("amplitude")];
    return rv;
}


struct SimpleConfig : public GfxEasingFunction
{
    GfxEasing::Function func;

    float value(float t, float b, float c, float d)
    {
        return func(t, b, c, d);
    }

    GfxEasingFunction *copy() const
    {
        SimpleConfig *rv = new SimpleConfig;
        rv->func = func;
        return rv;
    }
};

GfxEasing::Function curveToFunc(GfxEasing::Curve curve)
{
    switch(curve)
    {
    case GfxEasing::None:
        return &easeNone;
    case GfxEasing::InQuad:
        return &easeInQuad;
    case GfxEasing::OutQuad:
        return &easeOutQuad;
    case GfxEasing::InOutQuad:
        return &easeInOutQuad;
    case GfxEasing::OutInQuad:
        return &easeOutInQuad;
    case GfxEasing::InCubic:
        return &easeInCubic;
    case GfxEasing::OutCubic:
        return &easeOutCubic;
    case GfxEasing::InOutCubic:
        return &easeInOutCubic;
    case GfxEasing::OutInCubic:
        return &easeOutInCubic;
    case GfxEasing::InQuart:
        return &easeInQuart;
    case GfxEasing::OutQuart:
        return &easeOutQuart;
    case GfxEasing::InOutQuart:
        return &easeInOutQuart;
    case GfxEasing::OutInQuart:
        return &easeOutInQuart;
    case GfxEasing::InQuint:
        return &easeInQuint;
    case GfxEasing::OutQuint:
        return &easeOutQuint;
    case GfxEasing::InOutQuint:
        return &easeInOutQuint;
    case GfxEasing::OutInQuint:
        return &easeOutInQuint;
    case GfxEasing::InSine:
        return &easeInSine;
    case GfxEasing::OutSine:
        return &easeOutSine;
    case GfxEasing::InOutSine:
        return &easeInOutSine;
    case GfxEasing::OutInSine:
        return &easeOutInSine;
    case GfxEasing::InExpo:
        return &easeInExpo;
    case GfxEasing::OutExpo:
        return &easeOutExpo;
    case GfxEasing::InOutExpo:
        return &easeInOutExpo;
    case GfxEasing::OutInExpo:
        return &easeOutInExpo;
    case GfxEasing::InCirc:
        return &easeInCirc;
    case GfxEasing::OutCirc:
        return &easeOutCirc;
    case GfxEasing::InOutCirc:
        return &easeInOutCirc;
    case GfxEasing::OutInCirc:
        return &easeOutInCirc;
    case GfxEasing::InElastic:
        return &easeInElastic;
    case GfxEasing::OutElastic:
        return &easeOutElastic;
    case GfxEasing::InOutElastic:
        return &easeInOutElastic;
    case GfxEasing::OutInElastic:
        return &easeOutInElastic;
    case GfxEasing::InBack:
        return &easeInBack;
    case GfxEasing::OutBack:
        return &easeOutBack;
    case GfxEasing::InOutBack:
        return &easeInOutBack;
    case GfxEasing::OutInBack:
        return &easeOutInBack;
    case GfxEasing::InBounce:
        return &easeInBounce;
    case GfxEasing::OutBounce:
        return &easeOutBounce;
    case GfxEasing::InOutBounce:
        return &easeInOutBounce;
    case GfxEasing::OutInBounce:
        return &easeOutInBounce;
    default:
        return 0;
    };
}

struct NameFunctionMap : public QHash<QString, GfxEasing::Function>
{
    NameFunctionMap()
    {
        insert(QLatin1String("easeNone"), easeNone);
        insert(QLatin1String("easeInQuad"), easeInQuad);
        insert(QLatin1String("easeOutQuad"), easeOutQuad);
        insert(QLatin1String("easeInOutQuad"), easeInOutQuad);
        insert(QLatin1String("easeOutInQuad"), easeOutInQuad);
        insert(QLatin1String("easeInCubic"), easeInCubic);
        insert(QLatin1String("easeOutCubic"), easeOutCubic);
        insert(QLatin1String("easeInOutCubic"), easeInOutCubic);
        insert(QLatin1String("easeOutInCubic"), easeOutInCubic);
        insert(QLatin1String("easeInQuart"), easeInQuart);
        insert(QLatin1String("easeOutQuart"), easeOutQuart);
        insert(QLatin1String("easeInOutQuart"), easeInOutQuart);
        insert(QLatin1String("easeOutInQuart"), easeOutInQuart);
        insert(QLatin1String("easeInQuint"), easeInQuint);
        insert(QLatin1String("easeOutQuint"), easeOutQuint);
        insert(QLatin1String("easeInOutQuint"), easeInOutQuint);
        insert(QLatin1String("easeOutInQuint"), easeOutInQuint);
        insert(QLatin1String("easeInSine"), easeInSine);
        insert(QLatin1String("easeOutSine"), easeOutSine);
        insert(QLatin1String("easeInOutSine"), easeInOutSine);
        insert(QLatin1String("easeOutInSine"), easeOutInSine);
        insert(QLatin1String("easeInExpo"), easeInExpo);
        insert(QLatin1String("easeOutExpo"), easeOutExpo);
        insert(QLatin1String("easeInOutExpo"), easeInOutExpo);
        insert(QLatin1String("easeOutInExpo"), easeOutInExpo);
        insert(QLatin1String("easeInCirc"), easeInCirc);
        insert(QLatin1String("easeOutCirc"), easeOutCirc);
        insert(QLatin1String("easeInOutCirc"), easeInOutCirc);
        insert(QLatin1String("easeOutInCirc"), easeOutInCirc);
        insert(QLatin1String("easeInElastic"), easeInElastic);
        insert(QLatin1String("easeOutElastic"), easeOutElastic);
        insert(QLatin1String("easeInOutElastic"), easeInOutElastic);
        insert(QLatin1String("easeOutInElastic"), easeOutInElastic);
        insert(QLatin1String("easeInBack"), easeInBack);
        insert(QLatin1String("easeOutBack"), easeOutBack);
        insert(QLatin1String("easeInOutBack"), easeInOutBack);
        insert(QLatin1String("easeOutInBack"), easeOutInBack);
        insert(QLatin1String("easeInBounce"), easeInBounce);
        insert(QLatin1String("easeOutBounce"), easeOutBounce);
        insert(QLatin1String("easeInOutBounce"), easeInOutBounce);
        insert(QLatin1String("easeOutInBounce"), easeOutInBounce);
    }
};
Q_GLOBAL_STATIC(NameFunctionMap, nameFunctionMap);

typedef GfxEasingFunction *(*ConfigurableFunction)(const GfxEasingProperties &);
struct ConfigFunctionMap : public QHash<QString, ConfigurableFunction>
{
    ConfigFunctionMap()
    {
        insert(QLatin1String("easeInElastic"), easeInElasticC);
        insert(QLatin1String("easeOutElastic"), easeOutElasticC);
        insert(QLatin1String("easeInBounce"), easeInBounceC);
        insert(QLatin1String("easeOutBounce"), easeOutBounceC);
    }
};
Q_GLOBAL_STATIC(ConfigFunctionMap, configFunctionMap);

/*!
    \class GfxEasing
    \ingroup animation
    \brief The GfxEasing class provides easing curves for controlling animation.

    Easing curves describe a function that controls how a value changes over
    time.  Easing curves allow transitions from one value to another to appear
    more natural than a simple linear motion would allow.  The GfxEasing class
    is usually used in conjunction with the GfxTimeLine class, but can be used
    on its own.

    To calculate the value at a given time, the easing curve function requires
    the starting value, the final value and the total time to change from the
    starting to the final value.  When using the GfxEasing class with
    GfxTimeLine, these values are supplied by the GfxTimeLine.  When using
    the GfxEasing class on its own, the programmer must specify them using
    the GfxEasing::setFrom(), GfxEasing::setTo() and GfxEasing::setLength()
    methods, or by passing them explicitly to the GfxEasing::valueAt() method.

    For example,
    \code
    GfxEasing easing(GfxEasing::InOutQuad);
    easing.setFrom(0);
    easing.setTo(1000);
    easing.setLength(1000);

    for(int milliseconds = 0; milliseconds < 1000; ++milliseconds)
        qWarning() << "Value at" << milliseconds << "milliseconds is
                   << easing.valueAt(milliseconds);
    \endcode
    will print the value at each millisecond for an InOutQuad transition from
    0 to 1000 over 1 second.

    When using a GfxTimeLine, the values are communicated implicitly.
    \code
    GfxTimeLine timeline;
    GfxValue value(0);

    timeline.move(value, 1000, GfxEasing(GfxEasing::InOutQuad), 1000);
    \endcode
    In this case, any values set using the previous setter methods would be
    ignored.
 */

/*!
    \qmlproperty string NumericAnimation::easing
    \brief the easing curve used for the transition.

    Available values are:

    \list
    \i \e easeNone - Easing equation function for a simple linear tweening, with no easing.
    \i \e easeInQuad - Easing equation function for a quadratic (t^2) easing in: accelerating from zero velocity.
    \i \e easeOutQuad - Easing equation function for a quadratic (t^2) easing out: decelerating to zero velocity.
    \i \e easeInOutQuad - Easing equation function for a quadratic (t^2) easing in/out: acceleration until halfway, then deceleration.
    \i \e easeOutInQuad - Easing equation function for a quadratic (t^2) easing out/in: deceleration until halfway, then acceleration.
    \i \e easeInCubic - Easing equation function for a cubic (t^3) easing in: accelerating from zero velocity.
    \i \e easeOutCubic - Easing equation function for a cubic (t^3) easing out: decelerating from zero velocity.
    \i \e easeInOutCubic - Easing equation function for a cubic (t^3) easing in/out: acceleration until halfway, then deceleration.
    \i \e easeOutInCubic - Easing equation function for a cubic (t^3) easing out/in: deceleration until halfway, then acceleration.
    \i \e easeInQuart - Easing equation function for a quartic (t^4) easing in: accelerating from zero velocity.
    \i \e easeOutQuart - Easing equation function for a quartic (t^4) easing out: decelerating from zero velocity.
    \i \e easeInOutQuart - Easing equation function for a quartic (t^4) easing in/out: acceleration until halfway, then deceleration.
    \i \e easeOutInQuart - Easing equation function for a quartic (t^4) easing out/in: deceleration until halfway, then acceleration.
    \i \e easeInQuint - Easing equation function for a quintic (t^5) easing in: accelerating from zero velocity.
    \i \e easeOutQuint - Easing equation function for a quintic (t^5) easing out: decelerating from zero velocity.
    \i \e easeInOutQuint - Easing equation function for a quintic (t^5) easing in/out: acceleration until halfway, then deceleration.
    \i \e easeOutInQuint - Easing equation function for a quintic (t^5) easing out/in: deceleration until halfway, then acceleration.
    \i \e easeInSine - Easing equation function for a sinusoidal (sin(t)) easing in: accelerating from zero velocity.
    \i \e easeOutSine - Easing equation function for a sinusoidal (sin(t)) easing out: decelerating from zero velocity.
    \i \e easeInOutSine - Easing equation function for a sinusoidal (sin(t)) easing in/out: acceleration until halfway, then deceleration.
    \i \e easeOutInSine - Easing equation function for a sinusoidal (sin(t)) easing out/in: deceleration until halfway, then acceleration.
    \i \e easeInExpo - Easing equation function for an exponential (2^t) easing in: accelerating from zero velocity.
    \i \e easeOutExpo - Easing equation function for an exponential (2^t) easing out: decelerating from zero velocity.
    \i \e easeInOutExpo - Easing equation function for an exponential (2^t) easing in/out: acceleration until halfway, then deceleration.
    \i \e easeOutInExpo - Easing equation function for an exponential (2^t) easing out/in: deceleration until halfway, then acceleration.
    \i \e easeInCirc - Easing equation function for a circular (sqrt(1-t^2)) easing in: accelerating from zero velocity.
    \i \e easeOutCirc - Easing equation function for a circular (sqrt(1-t^2)) easing out: decelerating from zero velocity.
    \i \e easeInOutCirc - Easing equation function for a circular (sqrt(1-t^2)) easing in/out: acceleration until halfway, then deceleration.
    \i \e easeOutInCirc - Easing equation function for a circular (sqrt(1-t^2)) easing out/in: deceleration until halfway, then acceleration.
    \i \e easeInElastic - Easing equation function for an elastic (exponentially decaying sine wave) easing in: accelerating from zero velocity.  The peak amplitude can be set with the \i amplitude parameter, and the period of decay by the \i period parameter.
    \i \e easeOutElastic - Easing equation function for an elastic (exponentially decaying sine wave) easing out: decelerating from zero velocity.  The peak amplitude can be set with the \i amplitude parameter, and the period of decay by the \i period parameter.
    \i \e easeInOutElastic - Easing equation function for an elastic (exponentially decaying sine wave) easing in/out: acceleration until halfway, then deceleration.
    \i \e easeOutInElastic - Easing equation function for an elastic (exponentially decaying sine wave) easing out/in: deceleration until halfway, then acceleration.
    \i \e easeInBack - Easing equation function for a back (overshooting cubic easing: (s+1)*t^3 - s*t^2) easing in: accelerating from zero velocity.
    \i \e easeOutBack - Easing equation function for a back (overshooting cubic easing: (s+1)*t^3 - s*t^2) easing out: decelerating from zero velocity.
    \i \e easeInOutBack - Easing equation function for a back (overshooting cubic easing: (s+1)*t^3 - s*t^2) easing in/out: acceleration until halfway, then deceleration.
    \i \e easeOutInBack - Easing equation function for a back (overshooting cubic easing: (s+1)*t^3 - s*t^2) easing out/in: deceleration until halfway, then acceleration.
    \i \e easeOutBounce - Easing equation function for a bounce (exponentially decaying parabolic bounce) easing out: decelerating from zero velocity.
    \i \e easeInBounce - Easing equation function for a bounce (exponentially decaying parabolic bounce) easing in: accelerating from zero velocity.
    \i \e easeInOutBounce - Easing equation function for a bounce (exponentially decaying parabolic bounce) easing in/out: acceleration until halfway, then deceleration.
    \i \e easeOutInBounce - Easing equation function for a bounce (exponentially decaying parabolic bounce) easing out/in: deceleration until halfway, then acceleration.
    \endlist
*/

/*!
    \enum GfxEasing::Curve

    The type of easing curve.
*/
/*!
    \var GfxEasing::Curve GfxEasing::None 
    Easing equation function for a simple linear tweening, with no easing.
*/
/*!
    \var GfxEasing::Curve GfxEasing::InQuad 
    Easing equation function for a quadratic (t^2) easing in: accelerating from zero velocity.
*/
/*!
    \var GfxEasing::Curve GfxEasing::OutQuad 
    Easing equation function for a quadratic (t^2) easing out: decelerating to zero velocity.
*/
/*!
    \var GfxEasing::Curve GfxEasing::InOutQuad 
    Easing equation function for a quadratic (t^2) easing in/out: acceleration until halfway, then deceleration.
*/
/*!
    \var GfxEasing::Curve GfxEasing::OutInQuad 
    Easing equation function for a quadratic (t^2) easing out/in: deceleration until halfway, then acceleration.
*/
/*!
    \var GfxEasing::Curve GfxEasing::InCubic 
    Easing equation function for a cubic (t^3) easing in: accelerating from zero velocity.
*/
/*!
    \var GfxEasing::Curve GfxEasing::OutCubic 
    Easing equation function for a cubic (t^3) easing out: decelerating from zero velocity.
*/
/*!
    \var GfxEasing::Curve GfxEasing::InOutCubic 
    Easing equation function for a cubic (t^3) easing in/out: acceleration until halfway, then deceleration.
*/
/*!
    \var GfxEasing::Curve GfxEasing::OutInCubic 
    Easing equation function for a cubic (t^3) easing out/in: deceleration until halfway, then acceleration.
*/
/*!
    \var GfxEasing::Curve GfxEasing::InQuart 
    Easing equation function for a quartic (t^4) easing in: accelerating from zero velocity.
*/
/*!
    \var GfxEasing::Curve GfxEasing::OutQuart 
    Easing equation function for a quartic (t^4) easing out: decelerating from zero velocity.
*/
/*!
    \var GfxEasing::Curve GfxEasing::InOutQuart 
    Easing equation function for a quartic (t^4) easing in/out: acceleration until halfway, then deceleration.
*/
/*!
    \var GfxEasing::Curve GfxEasing::OutInQuart 
    Easing equation function for a quartic (t^4) easing out/in: deceleration until halfway, then acceleration.
*/
/*!
    \var GfxEasing::Curve GfxEasing::InQuint 
    Easing equation function for a quintic (t^5) easing in: accelerating from zero velocity.
*/
/*!
    \var GfxEasing::Curve GfxEasing::OutQuint 
    Easing equation function for a quintic (t^5) easing out: decelerating from zero velocity.
*/
/*!
    \var GfxEasing::Curve GfxEasing::InOutQuint 
    Easing equation function for a quintic (t^5) easing in/out: acceleration until halfway, then deceleration.
*/
/*!
    \var GfxEasing::Curve GfxEasing::OutInQuint 
    Easing equation function for a quintic (t^5) easing out/in: deceleration until halfway, then acceleration.
*/
/*!
    \var GfxEasing::Curve GfxEasing::InSine 
    Easing equation function for a sinusoidal (sin(t)) easing in: accelerating from zero velocity.
*/
/*!
    \var GfxEasing::Curve GfxEasing::OutSine 
    Easing equation function for a sinusoidal (sin(t)) easing out: decelerating from zero velocity.
*/
/*!
    \var GfxEasing::Curve GfxEasing::InOutSine 
    Easing equation function for a sinusoidal (sin(t)) easing in/out: acceleration until halfway, then deceleration.
*/
/*!
    \var GfxEasing::Curve GfxEasing::OutInSine 
    Easing equation function for a sinusoidal (sin(t)) easing out/in: deceleration until halfway, then acceleration.
*/
/*!
    \var GfxEasing::Curve GfxEasing::InExpo 
    Easing equation function for an exponential (2^t) easing in: accelerating from zero velocity.
*/
/*!
    \var GfxEasing::Curve GfxEasing::OutExpo 
    Easing equation function for an exponential (2^t) easing out: decelerating from zero velocity.
*/
/*!
    \var GfxEasing::Curve GfxEasing::InOutExpo 
    Easing equation function for an exponential (2^t) easing in/out: acceleration until halfway, then deceleration.
*/
/*!
    \var GfxEasing::Curve GfxEasing::OutInExpo 
    Easing equation function for an exponential (2^t) easing out/in: deceleration until halfway, then acceleration.
*/
/*!
    \var GfxEasing::Curve GfxEasing::InCirc 
    Easing equation function for a circular (sqrt(1-t^2)) easing in: accelerating from zero velocity.
*/
/*!
    \var GfxEasing::Curve GfxEasing::OutCirc 
    Easing equation function for a circular (sqrt(1-t^2)) easing out: decelerating from zero velocity.
*/
/*!
    \var GfxEasing::Curve GfxEasing::InOutCirc 
    Easing equation function for a circular (sqrt(1-t^2)) easing in/out: acceleration until halfway, then deceleration.
*/
/*!
    \var GfxEasing::Curve GfxEasing::OutInCirc 
    Easing equation function for a circular (sqrt(1-t^2)) easing out/in: deceleration until halfway, then acceleration.
*/
/*!
    \var GfxEasing::Curve GfxEasing::InElastic 
    Easing equation function for an elastic (exponentially decaying sine wave) easing in: accelerating from zero velocity.  The peak amplitude can be set with the \i amplitude parameter, and the period of decay by the \i period parameter.
*/
/*!
    \var GfxEasing::Curve GfxEasing::OutElastic 
    Easing equation function for an elastic (exponentially decaying sine wave) easing out: decelerating from zero velocity.  The peak amplitude can be set with the \i amplitude parameter, and the period of decay by the \i period parameter.
*/
/*!
    \var GfxEasing::Curve GfxEasing::InOutElastic 
    Easing equation function for an elastic (exponentially decaying sine wave) easing in/out: acceleration until halfway, then deceleration.
*/
/*!
    \var GfxEasing::Curve GfxEasing::OutInElastic 
    Easing equation function for an elastic (exponentially decaying sine wave) easing out/in: deceleration until halfway, then acceleration.
*/
/*!
    \var GfxEasing::Curve GfxEasing::InBack 
    Easing equation function for a back (overshooting cubic easing: (s+1)*t^3 - s*t^2) easing in: accelerating from zero velocity.
*/
/*!
    \var GfxEasing::Curve GfxEasing::OutBack 
    Easing equation function for a back (overshooting cubic easing: (s+1)*t^3 - s*t^2) easing out: decelerating from zero velocity.
*/
/*!
    \var GfxEasing::Curve GfxEasing::InOutBack 
    Easing equation function for a back (overshooting cubic easing: (s+1)*t^3 - s*t^2) easing in/out: acceleration until halfway, then deceleration.
*/
/*!
    \var GfxEasing::Curve GfxEasing::OutInBack 
    Easing equation function for a back (overshooting cubic easing: (s+1)*t^3 - s*t^2) easing out/in: deceleration until halfway, then acceleration.
*/
/*!
    \var GfxEasing::Curve GfxEasing::OutBounce 
    Easing equation function for a bounce (exponentially decaying parabolic bounce) easing out: decelerating from zero velocity.
*/
/*!
    \var GfxEasing::Curve GfxEasing::InBounce 
    Easing equation function for a bounce (exponentially decaying parabolic bounce) easing in: accelerating from zero velocity.
*/
/*!
    \var GfxEasing::Curve GfxEasing::InOutBounce 
    Easing equation function for a bounce (exponentially decaying parabolic bounce) easing in/out: acceleration until halfway, then deceleration.
*/
/*!
    \var GfxEasing::Curve GfxEasing::OutInBounce 
    Easing equation function for a bounce (exponentially decaying parabolic bounce) easing out/in: deceleration until halfway, then acceleration.
*/

/*!
    Construct a linear easing object.  This is equivalent to \c {GfxEasing(GfxEasing::None)}.
 */
GfxEasing::GfxEasing()
: _config(0), _func(&easeNone), _b(0.), _c(1.), _d(1.)
{
}

/*!
    Construct an easing object with the given \a curve.
 */
GfxEasing::GfxEasing(Curve curve)
: _config(0), _func(0), _b(0.), _c(1.), _d(1.)
{
    _func = curveToFunc(curve);
    if(!_func) {
        qWarning("GfxEasing: Invalid curve type %d", curve);
        _func = &easeNone;
    }
}

/*!
    Construct an easing object with the given \a curve.  If \a curve does not
    describe a legal curve, a linear easing object is constructed.

    Curve names have the form
    \c {ease<CurveName>[(<arg>: <arg value>[, <arg2>: <arg value>])]}.  The
    \i CurveName is equivalent to the GfxEasing::Curve enum name.  Some more
    advanced curves can take arguments to further refine their behaviour.  Where
    applicable, these parameters are described in the corresponding
    GfxEasing::Curve value documentation.

    For example,
    \code
    GfxEasing easing("easeInOutQuad");
    GfxEasing easing2("easeInElastic(period: 5, amplitude: 100)");
    \endcode
 */
GfxEasing::GfxEasing(const QString &curve)
: _config(0), _func(&easeNone), _b(0.), _c(1.), _d(1.)
{
    if(curve.contains(QLatin1Char('('))) {
        QString easeName = curve.trimmed();
        GfxEasingProperties prop;
        if(!easeName.endsWith(QLatin1Char(')'))) {
            qWarning("GfxEasing: Unmatched perenthesis in easing function '%s'",
                     curve.toLatin1().constData());
            return;
        }

        int idx = easeName.indexOf(QLatin1Char('('));
        QString prop_str =
            easeName.mid(idx + 1, easeName.length() - 1 - idx - 1);
        easeName = easeName.left(idx);

        QStringList props = prop_str.split(QLatin1Char(','));
        foreach(QString str, props) {
            int sep = str.indexOf(QLatin1Char(':'));

            if(sep == -1) {
                qWarning("GfxEasing: Improperly specified property in easing function '%s'",
                        curve.toLatin1().constData());
                return;
            }

            QString propName = str.left(sep).trimmed();
            bool isOk;
            qreal propValue = str.mid(sep + 1).trimmed().toDouble(&isOk);

            if(propName.isEmpty() || !isOk) {
                qWarning("GfxEasing: Improperly specified property in easing function '%s'",
                        curve.toLatin1().constData());
                return;
            }

            prop.insert(propName, propValue);
        }

        QHash<QString, ConfigurableFunction>::Iterator iter =
            configFunctionMap()->find(easeName);

        if(iter != configFunctionMap()->end())
            _config = (*iter)(prop);
    } else {
        if(nameFunctionMap()->contains(curve))
            _func = *(nameFunctionMap()->find(curve));
    }

    if(!_func && !_config) {
        qWarning("GfxEasing: Unknown easing curve '%s'",
                 curve.toLatin1().constData());
        _func = &easeNone;
    }
}

/*!
    Construct a copy of \a other.
 */
GfxEasing::GfxEasing(const GfxEasing &other)
: _config(0), _func(other._func), _b(other._b), _c(other._c), _d(other._d)
{
    if(other._config) _config = other._config->copy();
}

/*!
    Copy \a other.
 */
GfxEasing &GfxEasing::operator=(const GfxEasing &other)
{
    if(_config) { delete _config; _config = 0; }
    if(other._config) _config = other._config->copy();

    _func = other._func;
    _b = other._b;
    _c = other._c;
    _d = other._d;

    return *this;
}

/*!
    Returns true if this is a linear easing object.
 */
bool GfxEasing::isLinear() const
{
    return !_config && _func == &easeNone;
}

/*!
    Return the starting value for the easing curve.  By default this is 0.
 */
qreal GfxEasing::from() const
{
    return _b;
}

/*!
    Set the starting value for the easing curve to \a from.
 */
void GfxEasing::setFrom(qreal from)
{
    _b = from;
}

/*!
    Return the final value for the easing curve.  By default this is 0.
 */
qreal GfxEasing::to() const
{
    return _c;
}

/*!
    Set the final value for the easing curve to \a to.
 */
void GfxEasing::setTo(qreal to)
{
    _c = to;
}

/*!
    Return the length of the easing curve, in milliseconds.  By default this
    is 1.
 */
qreal GfxEasing::length() const
{
    return _d;
}

/*!
    Set the \a length of the easing curve, in milliseconds.
 */
void GfxEasing::setLength(qreal length)
{
    Q_ASSERT(length > 0);
    _d = length;
}

/*!
    Return the value for the easing curve at time \a t milliseconds, based on
    the parameters returned by GfxEasing::from(), GfxEasing::to() and
    GfxEasing::length().

    \a t is clamped to (0, GfxEasing::length()).
 */
qreal GfxEasing::valueAt(qreal t) const
{
    if(t < 0) t = 0;
    else if(t > length()) t = length();

    if(_config)
        return _config->value(t, _b, _c - _b, _d);
    else
        return _func(t, _b, _c - _b, _d);
}

/*
    Return the value for the easing curve at time \a t milliseconds, based on
    the provided parameters \a from, \a to and \a length.  The values returned
    from the object's GfxEasing::from(), GfxEasing::to() and GfxEasing::length()
    methods are ignored.

    \a t is clamped to (0, \a length).
 */
qreal GfxEasing::valueAt(qreal t, qreal from, qreal to, qreal length) const
{
    if(t < 0) t = 0;
    else if(t > length) t = length;

    if(_config)
        return _config->value(t, from, to - from, length);
    else
        return _func(t, from, to - from, length);
}

/*!
    \internal
 */
QStringList GfxEasing::curves()
{
    return nameFunctionMap()->keys();
}

QT_END_NAMESPACE