/****************************************************************************
**
** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
** All rights reserved.
** Contact: Nokia Corporation (qt-info@nokia.com)
**
** This file is part of the QtDeclarative module of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:LGPL$
** No Commercial Usage
** This file contains pre-release code and may not be distributed.
** You may use this file in accordance with the terms and conditions
** contained in the Technology Preview License Agreement accompanying
** this package.
**
** GNU Lesser General Public License Usage
** Alternatively, this file may be used under the terms of the GNU Lesser
** General Public License version 2.1 as published by the Free Software
** Foundation and appearing in the file LICENSE.LGPL included in the
** packaging of this file.  Please review the following information to
** ensure the GNU Lesser General Public License version 2.1 requirements
** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
**
** In addition, as a special exception, Nokia gives you certain additional
** rights.  These rights are described in the Nokia Qt LGPL Exception
** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
**
** If you have questions regarding the use of this file, please contact
** Nokia at qt-info@nokia.com.
**
**
**
**
**
**
**
**
** $QT_END_LICENSE$
**
****************************************************************************/

#include "qmltimeline_p_p.h"

#include <QDebug>
#include <QMutex>
#include <QThread>
#include <QWaitCondition>
#include <QEvent>
#include <QCoreApplication>
#include <QEasingCurve>
#include <QTime>

QT_BEGIN_NAMESPACE

struct Update {
    Update(QmlTimeLineValue *_g, qreal _v)
        : g(_g), v(_v) {}
    Update(const QmlTimeLineEvent &_e)
        : g(0), v(0), e(_e) {}

    QmlTimeLineValue *g;
    qreal v;
    QmlTimeLineEvent e;
};

struct QmlTimeLinePrivate
{
    QmlTimeLinePrivate(QmlTimeLine *);

    struct Op {
        enum Type {
            Pause,
            Set,
            Move,
            MoveBy,
            Accel,
            AccelDistance,
            Execute
        };
        Op() {}
        Op(Type t, int l, qreal v, qreal v2, int o, 
           const QmlTimeLineEvent &ev = QmlTimeLineEvent(), const QEasingCurve &es = QEasingCurve())
            : type(t), length(l), value(v), value2(v2), order(o), event(ev),
              easing(es) {}
        Op(const Op &o)
            : type(o.type), length(o.length), value(o.value), value2(o.value2),
              order(o.order), event(o.event), easing(o.easing) {}
        Op &operator=(const Op &o) {
            type = o.type; length = o.length; value = o.value; 
            value2 = o.value2; order = o.order; event = o.event; 
            easing = o.easing;
            return *this;
        }

        Type type;
        int length;
        qreal value;
        qreal value2;

        int order;
        QmlTimeLineEvent event;
        QEasingCurve easing;
    };
    struct TimeLine
    {
        TimeLine() : length(0), consumedOpLength(0), base(0.) {}
        QList<Op> ops;
        int length;
        int consumedOpLength;
        qreal base;
    };

    int length;
    int syncPoint;
    typedef QHash<QmlTimeLineObject *, TimeLine> Ops;
    Ops ops;
    QmlTimeLine *q;

    void add(QmlTimeLineObject &, const Op &);
    qreal value(const Op &op, int time, qreal base, bool *) const;

    int advance(int);

    bool clockRunning;
    int prevTime;

    int order;

    QmlTimeLine::SyncMode syncMode;
    int syncAdj;
    QList<QPair<int, Update> > *updateQueue;
};

QmlTimeLinePrivate::QmlTimeLinePrivate(QmlTimeLine *parent)
: length(0), syncPoint(0), q(parent), clockRunning(false), prevTime(0), order(0), syncMode(QmlTimeLine::LocalSync), syncAdj(0), updateQueue(0)
{
}

void QmlTimeLinePrivate::add(QmlTimeLineObject &g, const Op &o)
{
    if (g._t && g._t != q) {
        qWarning() << "QmlTimeLine: Cannot modify a QmlTimeLineValue owned by"
                   << "another timeline.";
        return;
    }
    g._t = q;

    Ops::Iterator iter = ops.find(&g);
    if (iter == ops.end()) {
        iter = ops.insert(&g, TimeLine());
        if (syncPoint > 0)
            q->pause(g, syncPoint);
    }
    if (!iter->ops.isEmpty() &&
       o.type == Op::Pause &&
       iter->ops.last().type == Op::Pause) {
        iter->ops.last().length += o.length;
        iter->length += o.length;
    } else {
        iter->ops.append(o);
        iter->length += o.length;
    }

    if (iter->length > length)
        length = iter->length;

    if (!clockRunning) {
        q->stop();
        prevTime = 0;
        clockRunning = true;

        if (syncMode == QmlTimeLine::LocalSync)  {
            syncAdj = -1;
        } else {
            syncAdj = 0;
        }
        q->start();
/*        q->tick(0);
        if (syncMode == QmlTimeLine::LocalSync)  {
            syncAdj = -1;
        } else {
            syncAdj = 0;
        }
        */
    }
}

qreal QmlTimeLinePrivate::value(const Op &op, int time, qreal base, bool *changed) const
{
    Q_ASSERT(time >= 0);
    Q_ASSERT(time <= op.length);
    *changed = true;

    switch(op.type) {
        case Op::Pause:
            *changed = false;
            return base;
        case Op::Set:
            return op.value;
        case Op::Move:
            if (time == 0) {
                return base;
            } else if (time == (op.length)) {
                return op.value;
            } else {
                qreal delta = op.value - base;
                qreal pTime = (qreal)(time) / (qreal)op.length;
                if (op.easing.type() == QEasingCurve::Linear)
                    return base + delta * pTime;
                else
                    return base + delta * op.easing.valueForProgress(pTime);
            }
        case Op::MoveBy:
            if (time == 0) {
                return base;
            } else if (time == (op.length)) {
                return base + op.value;
            } else {
                qreal delta = op.value;
                qreal pTime = (qreal)(time) / (qreal)op.length;
                if (op.easing.type() == QEasingCurve::Linear)
                    return base + delta * pTime;
                else
                    return base + delta * op.easing.valueForProgress(pTime);
            }
        case Op::Accel:
            if (time == 0) {
                return base;
            } else {
                qreal t = (qreal)(time) / 1000.0f;
                qreal delta = op.value * t + 0.5f * op.value2 * t * t;
                return base + delta;
            }
        case Op::AccelDistance:
            if (time == 0) {
                return base;
            } else if (time == (op.length)) {
                return base + op.value2;
            } else {
                qreal t = (qreal)(time) / 1000.0f;
                qreal accel = -1.0f * 1000.0f * op.value / (qreal)op.length;
                qreal delta = op.value * t + 0.5f * accel * t * t;
                return base + delta;

            }
        case Op::Execute:
            op.event.execute();
            *changed = false;
            return -1;
    }

    return base;
}

/*!
    \internal
    \class QmlTimeLine
    \ingroup group_animation
    \brief The QmlTimeLine class provides a timeline for controlling animations.

    QmlTimeLine is similar to QTimeLine except:
    \list
    \i It updates QmlTimeLineValue instances directly, rather than maintaining a single
    current value.

    For example, the following animates a simple value over 200 milliseconds:
    \code
    QmlTimeLineValue v(<starting value>);
    QmlTimeLine tl;
    tl.move(v, 100., 200);
    tl.start()
    \endcode

    If your program needs to know when values are changed, it can either
    connect to the QmlTimeLine's updated() signal, or inherit from QmlTimeLineValue
    and reimplement the QmlTimeLineValue::setValue() method.

    \i Supports multiple QmlTimeLineValue, arbitrary start and end values and allows
    animations to be strung together for more complex effects.

    For example, the following animation moves the x and y coordinates of
    an object from wherever they are to the position (100, 100) in 50
    milliseconds and then further animates them to (100, 200) in 50
    milliseconds:

    \code
    QmlTimeLineValue x(<starting value>);
    QmlTimeLineValue y(<starting value>);

    QmlTimeLine tl;
    tl.start();

    tl.move(x, 100., 50);
    tl.move(y, 100., 50);
    tl.move(y, 200., 50);
    \endcode

    \i All QmlTimeLine instances share a single, synchronized clock.

    Actions scheduled within the same event loop tick are scheduled
    synchronously against each other, regardless of the wall time between the
    scheduling.  Synchronized scheduling applies both to within the same
    QmlTimeLine and across separate QmlTimeLine's within the same process.

    \endlist

    Currently easing functions are not supported.
*/


/*!
    Construct a new QmlTimeLine with the specified \a parent.
*/
QmlTimeLine::QmlTimeLine(QObject *parent)
: QAbstractAnimation(parent)
{
    d = new QmlTimeLinePrivate(this);
}

/*!
    Destroys the time line.  Any inprogress animations are canceled, but not
    completed.
*/
QmlTimeLine::~QmlTimeLine()
{
    for (QmlTimeLinePrivate::Ops::Iterator iter = d->ops.begin();
            iter != d->ops.end();
            ++iter)
        iter.key()->_t = 0;

    delete d; d = 0;
}

/*!
    \enum QmlTimeLine::SyncMode
 */

/*!
    Return the timeline's synchronization mode.
 */
QmlTimeLine::SyncMode QmlTimeLine::syncMode() const
{
    return d->syncMode;
}

/*!
    Set the timeline's synchronization mode to \a syncMode.
 */
void QmlTimeLine::setSyncMode(SyncMode syncMode)
{
    d->syncMode = syncMode;
}

/*!
    Pause \a obj for \a time milliseconds.
*/
void QmlTimeLine::pause(QmlTimeLineObject &obj, int time)
{
    if (time <= 0) return;
    QmlTimeLinePrivate::Op op(QmlTimeLinePrivate::Op::Pause, time, 0., 0., d->order++);
    d->add(obj, op);
}

/*!
    Execute the \a event.
 */
void QmlTimeLine::execute(const QmlTimeLineEvent &event)
{
    QmlTimeLinePrivate::Op op(QmlTimeLinePrivate::Op::Execute, 0, 0, 0., d->order++, event);
    d->add(*event.eventObject(), op);
}

/*!
    Set the \a value of \a timeLineValue.
*/
void QmlTimeLine::set(QmlTimeLineValue &timeLineValue, qreal value)
{
    QmlTimeLinePrivate::Op op(QmlTimeLinePrivate::Op::Set, 0, value, 0., d->order++);
    d->add(timeLineValue, op);
}

/*!
    Decelerate \a timeLineValue from the starting \a velocity to zero at the
    given \a acceleration rate.  Although the \a acceleration is technically
    a deceleration, it should always be positive.  The QmlTimeLine will ensure
    that the deceleration is in the opposite direction to the initial velocity.
*/
int QmlTimeLine::accel(QmlTimeLineValue &timeLineValue, qreal velocity, qreal acceleration)
{
    if ((velocity > 0.0f) ==  (acceleration > 0.0f))
        acceleration = acceleration * -1.0f;

    int time = static_cast<int>(-1000 * velocity / acceleration);

    QmlTimeLinePrivate::Op op(QmlTimeLinePrivate::Op::Accel, time, velocity, acceleration, d->order++);
    d->add(timeLineValue, op);

    return time;
}

/*!
    \overload

    Decelerate \a timeLineValue from the starting \a velocity to zero at the
    given \a acceleration rate over a maximum distance of maxDistance.

    If necessary, QmlTimeLine will reduce the acceleration to ensure that the
    entire operation does not require a move of more than \a maxDistance.
    \a maxDistance should always be positive.
*/
int QmlTimeLine::accel(QmlTimeLineValue &timeLineValue, qreal velocity, qreal acceleration, qreal maxDistance)
{
    Q_ASSERT(acceleration >= 0.0f && maxDistance >= 0.0f);

    qreal maxAccel = (velocity * velocity) / (2.0f * maxDistance);
    if (maxAccel > acceleration)
        acceleration = maxAccel;

    if ((velocity > 0.0f) ==  (acceleration > 0.0f))
        acceleration = acceleration * -1.0f;

    int time = static_cast<int>(-1000 * velocity / acceleration);

    QmlTimeLinePrivate::Op op(QmlTimeLinePrivate::Op::Accel, time, velocity, acceleration, d->order++);
    d->add(timeLineValue, op);

    return time;
}

/*!
    Decelerate \a timeLineValue from the starting \a velocity to zero over the given
    \a distance.  This is like accel(), but the QmlTimeLine calculates the exact
    deceleration to use.

    \a distance should be positive.
*/
int QmlTimeLine::accelDistance(QmlTimeLineValue &timeLineValue, qreal velocity, qreal distance)
{
    if (distance == 0.0f || velocity == 0.0f)
        return -1;
    Q_ASSERT((distance >= 0.0f) == (velocity >= 0.0f));

    int time = static_cast<int>(1000 * (2.0f * distance) / velocity);

    QmlTimeLinePrivate::Op op(QmlTimeLinePrivate::Op::AccelDistance, time, velocity, distance, d->order++);
    d->add(timeLineValue, op);

    return time;
}

/*!
    Linearly change the \a timeLineValue from its current value to the given
    \a destination value over \a time milliseconds.
*/
void QmlTimeLine::move(QmlTimeLineValue &timeLineValue, qreal destination, int time)
{
    if (time <= 0) return;
    QmlTimeLinePrivate::Op op(QmlTimeLinePrivate::Op::Move, time, destination, 0.0f, d->order++);
    d->add(timeLineValue, op);
}

/*!
    Change the \a timeLineValue from its current value to the given \a destination
    value over \a time milliseconds using the \a easing curve.
 */
void QmlTimeLine::move(QmlTimeLineValue &timeLineValue, qreal destination, const QEasingCurve &easing, int time)
{
    if (time <= 0) return;
    QmlTimeLinePrivate::Op op(QmlTimeLinePrivate::Op::Move, time, destination, 0.0f, d->order++, QmlTimeLineEvent(), easing);
    d->add(timeLineValue, op);
}

/*!
    Linearly change the \a timeLineValue from its current value by the \a change amount
    over \a time milliseconds.
*/
void QmlTimeLine::moveBy(QmlTimeLineValue &timeLineValue, qreal change, int time)
{
    if (time <= 0) return;
    QmlTimeLinePrivate::Op op(QmlTimeLinePrivate::Op::MoveBy, time, change, 0.0f, d->order++);
    d->add(timeLineValue, op);
}

/*!
    Change the \a timeLineValue from its current value by the \a change amount over
    \a time milliseconds using the \a easing curve.
 */
void QmlTimeLine::moveBy(QmlTimeLineValue &timeLineValue, qreal change, const QEasingCurve &easing, int time)
{
    if (time <= 0) return;
    QmlTimeLinePrivate::Op op(QmlTimeLinePrivate::Op::MoveBy, time, change, 0.0f, d->order++, QmlTimeLineEvent(), easing);
    d->add(timeLineValue, op);
}

/*!
    Cancel (but don't complete) all scheduled actions for \a timeLineValue.
*/
void QmlTimeLine::reset(QmlTimeLineValue &timeLineValue)
{
    if (!timeLineValue._t)
        return;
    if (timeLineValue._t != this) {
        qWarning() << "QmlTimeLine: Cannot reset a QmlTimeLineValue owned by another timeline.";
        return;
    }
    remove(&timeLineValue);
    timeLineValue._t = 0;
}

int QmlTimeLine::duration() const
{
    return -1;
}

/*!
    Synchronize the end point of \a timeLineValue to the endpoint of \a syncTo
    within this timeline.

    Following operations on \a timeLineValue in this timeline will be scheduled after
    all the currently scheduled actions on \a syncTo are complete.  In
    psuedo-code this is equivalent to:
    \code
    QmlTimeLine::pause(timeLineValue, min(0, length_of(syncTo) - length_of(timeLineValue)))
    \endcode
*/
void QmlTimeLine::sync(QmlTimeLineValue &timeLineValue, QmlTimeLineValue &syncTo)
{
    QmlTimeLinePrivate::Ops::Iterator iter = d->ops.find(&syncTo);
    if (iter == d->ops.end())
        return;
    int length = iter->length;

    iter = d->ops.find(&timeLineValue);
    if (iter == d->ops.end()) {
        pause(timeLineValue, length);
    } else {
        int glength = iter->length;
        pause(timeLineValue, length - glength);
    }
}

/*!
    Synchronize the end point of \a timeLineValue to the endpoint of the longest
    action cursrently scheduled in the timeline.

    In psuedo-code, this is equivalent to:
    \code
    QmlTimeLine::pause(timeLineValue, length_of(timeline) - length_of(timeLineValue))
    \endcode
*/
void QmlTimeLine::sync(QmlTimeLineValue &timeLineValue)
{
    QmlTimeLinePrivate::Ops::Iterator iter = d->ops.find(&timeLineValue);
    if (iter == d->ops.end()) {
        pause(timeLineValue, d->length);
    } else {
        pause(timeLineValue, d->length - iter->length);
    }
}

/*
    Synchronize all currently and future scheduled values in this timeline to
    the longest action currently scheduled.

    For example:
    \code
    value1->setValue(0.);
    value2->setValue(0.);
    value3->setValue(0.);
    QmlTimeLine tl;
    ...
    tl.move(value1, 10, 200);
    tl.move(value2, 10, 100);
    tl.sync();
    tl.move(value2, 20, 100);
    tl.move(value3, 20, 100);
    \endcode

    will result in:

    \table
    \header \o \o 0ms \o 50ms \o 100ms \o 150ms \o 200ms \o 250ms \o 300ms
    \row \o value1 \o 0 \o 2.5 \o 5.0 \o 7.5 \o 10 \o 10 \o 10
    \row \o value2 \o 0 \o 5.0 \o 10.0 \o 10.0 \o 10.0 \o 15.0 \o 20.0
    \row \o value2 \o 0 \o 0 \o 0 \o 0 \o 0 \o 10.0 \o 20.0
    \endtable
*/

/*void QmlTimeLine::sync()
{
    for (QmlTimeLinePrivate::Ops::Iterator iter = d->ops.begin();
            iter != d->ops.end();
            ++iter)
        pause(*iter.key(), d->length - iter->length);
    d->syncPoint = d->length;
}*/

/*! 
    \internal 

    Temporary hack.
 */
void QmlTimeLine::setSyncPoint(int sp)
{
    d->syncPoint = sp;
}

/*! 
    \internal 
 
    Temporary hack.
 */
int QmlTimeLine::syncPoint() const
{
    return d->syncPoint;
}

/*!
    Returns true if the timeline is active.  An active timeline is one where
    QmlTimeLineValue actions are still pending.
*/
bool QmlTimeLine::isActive() const
{
    return !d->ops.isEmpty();
}

/*!
    Completes the timeline.  All queued actions are played to completion, and then discarded.  For example,
    \code
    QmlTimeLineValue v(0.);
    QmlTimeLine tl;
    tl.move(v, 100., 1000.);
    // 500 ms passes
    // v.value() == 50.
    tl.complete();
    // v.value() == 100.
    \endcode
*/
void QmlTimeLine::complete()
{
    d->advance(d->length);
}

/*!
    Resets the timeline.  All queued actions are discarded and QmlTimeLineValue's retain their current value. For example,
    \code
    QmlTimeLineValue v(0.);
    QmlTimeLine tl;
    tl.move(v, 100., 1000.);
    // 500 ms passes
    // v.value() == 50.
    tl.clear();
    // v.value() == 50.
    \endcode
*/
void QmlTimeLine::clear()
{
    for (QmlTimeLinePrivate::Ops::ConstIterator iter = d->ops.begin(); iter != d->ops.end(); ++iter)
        iter.key()->_t = 0;
    d->ops.clear();
    d->length = 0;
    d->syncPoint = 0;
    //XXX need stop here?
}

int QmlTimeLine::time() const
{
    return d->prevTime;
}

/*!
    \fn void QmlTimeLine::updated()

    Emitted each time the timeline modifies QmlTimeLineValues.  Even if multiple
    QmlTimeLineValues are changed, this signal is only emitted once for each clock tick.
*/

void QmlTimeLine::updateCurrentTime(int v)
{
    if (d->syncAdj == -1)
        d->syncAdj = v;
    v -= d->syncAdj;

    int timeChanged = v - d->prevTime;
#if 0
    if (!timeChanged)
        return;
#endif
    d->prevTime = v;
    d->advance(timeChanged);
    emit updated();

    // Do we need to stop the clock?
    if (d->ops.isEmpty()) {
        stop();
        d->prevTime = 0;
        d->clockRunning = false;
        emit completed();
    } /*else if (pauseTime > 0) {
        GfxClock::cancelClock();
        d->prevTime = 0;
        GfxClock::pauseFor(pauseTime);
        d->syncAdj = 0;
        d->clockRunning = false;
    }*/ else if (/*!GfxClock::isActive()*/ state() != Running) {
        stop();
        d->prevTime = 0;
        d->clockRunning = true;
        d->syncAdj = 0;
        start();
    }
}

bool operator<(const QPair<int, Update> &lhs,
               const QPair<int, Update> &rhs)
{
    return lhs.first < rhs.first;
}

int QmlTimeLinePrivate::advance(int t)
{
    int pauseTime = -1;

    // XXX - surely there is a more efficient way?
    do {
        pauseTime = -1;
        // Minimal advance time
        int advanceTime = t;
        for (Ops::Iterator iter = ops.begin(); iter != ops.end(); ++iter) {
            TimeLine &tl = *iter;
            Op &op = tl.ops.first();
            int length = op.length - tl.consumedOpLength;
                
            if (length < advanceTime) {
                advanceTime = length;
                if (advanceTime == 0)
                    break;
            }
        }
        t -= advanceTime;

        // Process until then.  A zero length advance time will only process 
        // sets.
        QList<QPair<int, Update> > updates;

        for (Ops::Iterator iter = ops.begin(); iter != ops.end(); ) {
            QmlTimeLineValue *v = static_cast<QmlTimeLineValue *>(iter.key());
            TimeLine &tl = *iter;
            Q_ASSERT(!tl.ops.isEmpty());

            do {
                Op &op = tl.ops.first();
                if (advanceTime == 0 && op.length != 0)
                    continue;

                if (tl.consumedOpLength == 0 && 
                   op.type != Op::Pause && 
                   op.type != Op::Execute)
                    tl.base = v->value();

                if ((tl.consumedOpLength + advanceTime) == op.length) {
                    if (op.type == Op::Execute) {
                        updates << qMakePair(op.order, Update(op.event));
                    } else {
                        bool changed = false;
                        qreal val = value(op, op.length, tl.base, &changed);
                        if (changed)
                            updates << qMakePair(op.order, Update(v, val));
                    }
                    tl.length -= qMin(advanceTime, tl.length);
                    tl.consumedOpLength = 0;
                    tl.ops.removeFirst();
                } else {
                    tl.consumedOpLength += advanceTime;
                    bool changed = false;
                    qreal val = value(op, tl.consumedOpLength, tl.base, &changed);
                    if (changed)
                        updates << qMakePair(op.order, Update(v, val));
                    tl.length -= qMin(advanceTime, tl.length);
                    break;
                }

            } while(!tl.ops.isEmpty() && advanceTime == 0 && tl.ops.first().length == 0);


            if (tl.ops.isEmpty()) {
                iter = ops.erase(iter);
                v->_t = 0;
            } else {
                if (tl.ops.first().type == Op::Pause && pauseTime != 0) {
                    int opPauseTime = tl.ops.first().length - tl.consumedOpLength;
                    if (pauseTime == -1 || opPauseTime < pauseTime)
                        pauseTime = opPauseTime;
                } else {
                    pauseTime = 0;
                }
                ++iter;
            }
        }

        length -= qMin(length, advanceTime);
        syncPoint -= advanceTime;

        qSort(updates.begin(), updates.end());
        updateQueue = &updates;
        for (int ii = 0; ii < updates.count(); ++ii) {
            const Update &v = updates.at(ii).second;
            if (v.g)
                v.g->setValue(v.v);
            else
                v.e.execute();
        }
        updateQueue = 0;
    } while(t);

    return pauseTime;
}

void QmlTimeLine::remove(QmlTimeLineObject *v)
{
    QmlTimeLinePrivate::Ops::Iterator iter = d->ops.find(v);
    Q_ASSERT(iter != d->ops.end());

    int len = iter->length;
    d->ops.erase(iter);
    if (len == d->length) {
        // We need to recalculate the length
        d->length = 0;
        for (QmlTimeLinePrivate::Ops::Iterator iter = d->ops.begin();
                iter != d->ops.end();
                ++iter) {

            if (iter->length > d->length)
                d->length = iter->length;

        }
    }
    if (d->ops.isEmpty()) {
        stop();
        d->clockRunning = false;
    } else if (/*!GfxClock::isActive()*/ state() != Running) {
        stop();
        d->prevTime = 0;
        d->clockRunning = true;

        if (d->syncMode == QmlTimeLine::LocalSync) {
            d->syncAdj = -1;
        } else {
            d->syncAdj = 0;
        }
        start();
    }

    if (d->updateQueue) {
        for (int ii = 0; ii < d->updateQueue->count(); ++ii) {
            if (d->updateQueue->at(ii).second.g == v ||
               d->updateQueue->at(ii).second.e.eventObject() == v) {
                d->updateQueue->removeAt(ii);
                --ii;
            }
        }
    }


}

/*!
    \internal
    \class QmlTimeLineValue
    \ingroup group_animation
    \brief The QmlTimeLineValue class provides a value that can be modified by QmlTimeLine.
*/

/*!
    \fn QmlTimeLineValue::QmlTimeLineValue(qreal value = 0)

    Construct a new QmlTimeLineValue with an initial \a value.
*/

/*!
    \fn qreal QmlTimeLineValue::value() const

    Return the current value.
*/

/*!
    \fn void QmlTimeLineValue::setValue(qreal value)

    Set the current \a value.
*/

/*!
    \fn QmlTimeLine *QmlTimeLineValue::timeLine() const

    If a QmlTimeLine is operating on this value, return a pointer to it,
    otherwise return null.
*/


QmlTimeLineObject::QmlTimeLineObject()
: _t(0)
{
}

QmlTimeLineObject::~QmlTimeLineObject()
{
    if (_t) {
        _t->remove(this);
        _t = 0;
    }
}

QmlTimeLineEvent::QmlTimeLineEvent()
: d0(0), d1(0), d2(0)
{
}

QmlTimeLineEvent::QmlTimeLineEvent(const QmlTimeLineEvent &o)
: d0(o.d0), d1(o.d1), d2(o.d2)
{
}

QmlTimeLineEvent &QmlTimeLineEvent::operator=(const QmlTimeLineEvent &o)
{
    d0 = o.d0;
    d1 = o.d1;
    d2 = o.d2;
    return *this;
}

void QmlTimeLineEvent::execute() const
{
    d0(d1);
}

QmlTimeLineObject *QmlTimeLineEvent::eventObject() const
{
    return d2;
}

QT_END_NAMESPACE