/**************************************************************************** ** ** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). ** Contact: Nokia Corporation (qt-info@nokia.com) ** ** This file is part of the QtGui module of the Qt Toolkit. ** ** $QT_BEGIN_LICENSE:LGPL$ ** No Commercial Usage ** This file contains pre-release code and may not be distributed. ** You may use this file in accordance with the terms and conditions ** contained in the either Technology Preview License Agreement or the ** Beta Release License Agreement. ** ** GNU Lesser General Public License Usage ** Alternatively, this file may be used under the terms of the GNU Lesser ** General Public License version 2.1 as published by the Free Software ** Foundation and appearing in the file LICENSE.LGPL included in the ** packaging of this file. Please review the following information to ** ensure the GNU Lesser General Public License version 2.1 requirements ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. ** ** In addition, as a special exception, Nokia gives you certain ** additional rights. These rights are described in the Nokia Qt LGPL ** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this ** package. ** ** GNU General Public License Usage ** Alternatively, this file may be used under the terms of the GNU ** General Public License version 3.0 as published by the Free Software ** Foundation and appearing in the file LICENSE.GPL included in the ** packaging of this file. Please review the following information to ** ensure the GNU General Public License version 3.0 requirements will be ** met: http://www.gnu.org/copyleft/gpl.html. ** ** If you are unsure which license is appropriate for your use, please ** contact the sales department at http://www.qtsoftware.com/contact. ** $QT_END_LICENSE$ ** ****************************************************************************/ #include "qdialog.h" #include "qevent.h" #include "qdesktopwidget.h" #include "qpushbutton.h" #include "qapplication.h" #include "qlayout.h" #include "qsizegrip.h" #include "qwhatsthis.h" #include "qmenu.h" #include "qcursor.h" #include "private/qdialog_p.h" #ifndef QT_NO_ACCESSIBILITY #include "qaccessible.h" #endif #if defined(Q_WS_WINCE) #include "qt_windows.h" #include "qmenubar.h" #include "qpointer.h" #include "qguifunctions_wince.h" extern bool qt_wince_is_mobile(); //defined in qguifunctions_wce.cpp extern bool qt_wince_is_smartphone(); //is defined in qguifunctions_wce.cpp #elif defined(Q_WS_X11) # include "../kernel/qt_x11_p.h" #elif defined(Q_OS_SYMBIAN) # include "qfiledialog.h" # include "qmenubar.h" #endif #ifndef SPI_GETSNAPTODEFBUTTON # define SPI_GETSNAPTODEFBUTTON 95 #endif QT_BEGIN_NAMESPACE /*! \class QDialog \brief The QDialog class is the base class of dialog windows. \ingroup dialogs \ingroup abstractwidgets \mainclass A dialog window is a top-level window mostly used for short-term tasks and brief communications with the user. QDialogs may be modal or modeless. QDialogs can provide a \link #return return value\endlink, and they can have \link #default default buttons\endlink. QDialogs can also have a QSizeGrip in their lower-right corner, using setSizeGripEnabled(). Note that QDialog (an any other widget that has type Qt::Dialog) uses the parent widget slightly differently from other classes in Qt. A dialog is always a top-level widget, but if it has a parent, its default location is centered on top of the parent's top-level widget (if it is not top-level itself). It will also share the parent's taskbar entry. Use the overload of the QWidget::setParent() function to change the ownership of a QDialog widget. This function allows you to explicitly set the window flags of the reparented widget; using the overloaded function will clear the window flags specifying the window-system properties for the widget (in particular it will reset the Qt::Dialog flag). \section1 Modal Dialogs A \bold{modal} dialog is a dialog that blocks input to other visible windows in the same application. Dialogs that are used to request a file name from the user or that are used to set application preferences are usually modal. Dialogs can be \l{Qt::ApplicationModal}{application modal} (the default) or \l{Qt::WindowModal}{window modal}. When an application modal dialog is opened, the user must finish interacting with the dialog and close it before they can access any other window in the application. Window modal dialogs only block access to the window associated with the dialog, allowing the user to continue to use other windows in an application. The most common way to display a modal dialog is to call its exec() function. When the user closes the dialog, exec() will provide a useful \link #return return value\endlink. Typically, to get the dialog to close and return the appropriate value, we connect a default button, e.g. \gui OK, to the accept() slot and a \gui Cancel button to the reject() slot. Alternatively you can call the done() slot with \c Accepted or \c Rejected. An alternative is to call setModal(true) or setWindowModality(), then show(). Unlike exec(), show() returns control to the caller immediately. Calling setModal(true) is especially useful for progress dialogs, where the user must have the ability to interact with the dialog, e.g. to cancel a long running operation. If you use show() and setModal(true) together to perform a long operation, you must call QApplication::processEvents() periodically during processing to enable the user to interact with the dialog. (See QProgressDialog.) \section1 Modeless Dialogs A \bold{modeless} dialog is a dialog that operates independently of other windows in the same application. Find and replace dialogs in word-processors are often modeless to allow the user to interact with both the application's main window and with the dialog. Modeless dialogs are displayed using show(), which returns control to the caller immediately. If you invoke the \l{QWidget::show()}{show()} function after hiding a dialog, the dialog will be displayed in its original position. This is because the window manager decides the position for windows that have not been explicitly placed by the programmer. To preserve the position of a dialog that has been moved by the user, save its position in your \l{QWidget::closeEvent()}{closeEvent()} handler and then move the dialog to that position, before showing it again. \target default \section1 Default Button A dialog's \e default button is the button that's pressed when the user presses Enter (Return). This button is used to signify that the user accepts the dialog's settings and wants to close the dialog. Use QPushButton::setDefault(), QPushButton::isDefault() and QPushButton::autoDefault() to set and control the dialog's default button. \target escapekey \section1 Escape Key If the user presses the Esc key in a dialog, QDialog::reject() will be called. This will cause the window to close: The \link QCloseEvent close event \endlink cannot be \link QCloseEvent::ignore() ignored \endlink. \section1 Extensibility Extensibility is the ability to show the dialog in two ways: a partial dialog that shows the most commonly used options, and a full dialog that shows all the options. Typically an extensible dialog will initially appear as a partial dialog, but with a \gui More toggle button. If the user presses the \gui More button down, the dialog is expanded. The \l{Extension Example} shows how to achieve extensible dialogs using Qt. \target return \section1 Return Value (Modal Dialogs) Modal dialogs are often used in situations where a return value is required, e.g. to indicate whether the user pressed \gui OK or \gui Cancel. A dialog can be closed by calling the accept() or the reject() slots, and exec() will return \c Accepted or \c Rejected as appropriate. The exec() call returns the result of the dialog. The result is also available from result() if the dialog has not been destroyed. In order to modify your dialog's close behavior, you can reimplement the functions accept(), reject() or done(). The \l{QWidget::closeEvent()}{closeEvent()} function should only be reimplemented to preserve the dialog's position or to override the standard close or reject behavior. \target examples \section1 Code Examples A modal dialog: \snippet doc/src/snippets/dialogs/dialogs.cpp 1 A modeless dialog: \snippet doc/src/snippets/dialogs/dialogs.cpp 0 \sa QDialogButtonBox, QTabWidget, QWidget, QProgressDialog, {fowler}{GUI Design Handbook: Dialogs, Standard}, {Extension Example}, {Standard Dialogs Example} */ /*! \enum QDialog::DialogCode The value returned by a modal dialog. \value Accepted \value Rejected */ /*! \property QDialog::sizeGripEnabled \brief whether the size grip is enabled A QSizeGrip is placed in the bottom-right corner of the dialog when this property is enabled. By default, the size grip is disabled. */ /*! Constructs a dialog with parent \a parent. A dialog is always a top-level widget, but if it has a parent, its default location is centered on top of the parent. It will also share the parent's taskbar entry. The widget flags \a f are passed on to the QWidget constructor. If, for example, you don't want a What's This button in the title bar of the dialog, pass Qt::WindowTitleHint | Qt::WindowSystemMenuHint in \a f. \sa QWidget::setWindowFlags() */ QDialog::QDialog(QWidget *parent, Qt::WindowFlags f) : QWidget(*new QDialogPrivate, parent, f | QFlag((f & Qt::WindowType_Mask) == 0 ? Qt::Dialog : 0)) { #ifdef Q_WS_WINCE if (!qt_wince_is_smartphone()) setWindowFlags(windowFlags() | Qt::WindowOkButtonHint | QFlag(qt_wince_is_mobile() ? 0 : Qt::WindowCancelButtonHint)); #endif } #ifdef QT3_SUPPORT /*! \overload \obsolete */ QDialog::QDialog(QWidget *parent, const char *name, bool modal, Qt::WindowFlags f) : QWidget(*new QDialogPrivate, parent, f | QFlag(modal ? Qt::WShowModal : 0) | QFlag((f & Qt::WindowType_Mask) == 0 ? Qt::Dialog : 0) ) { setObjectName(QString::fromAscii(name)); } #endif /*! \overload \internal */ QDialog::QDialog(QDialogPrivate &dd, QWidget *parent, Qt::WindowFlags f) : QWidget(dd, parent, f | QFlag((f & Qt::WindowType_Mask) == 0 ? Qt::Dialog : 0)) { #ifdef Q_WS_WINCE if (!qt_wince_is_smartphone()) setWindowFlags(windowFlags() | Qt::WindowOkButtonHint | QFlag(qt_wince_is_mobile() ? 0 : Qt::WindowCancelButtonHint)); #endif } /*! Destroys the QDialog, deleting all its children. */ QDialog::~QDialog() { QT_TRY { // Need to hide() here, as our (to-be) overridden hide() // will not be called in ~QWidget. hide(); } QT_CATCH(...) { // we're in the destructor - just swallow the exception } } /*! \internal This function is called by the push button \a pushButton when it becomes the default button. If \a pushButton is 0, the dialogs default default button becomes the default button. This is what a push button calls when it loses focus. */ void QDialogPrivate::setDefault(QPushButton *pushButton) { Q_Q(QDialog); bool hasMain = false; QList list = qFindChildren(q); for (int i=0; iwindow() == q) { if (pb == mainDef) hasMain = true; if (pb != pushButton) pb->setDefault(false); } } if (!pushButton && hasMain) mainDef->setDefault(true); if (!hasMain) mainDef = pushButton; } /*! \internal This function sets the default default push button to \a pushButton. This function is called by QPushButton::setDefault(). */ void QDialogPrivate::setMainDefault(QPushButton *pushButton) { mainDef = 0; setDefault(pushButton); } /*! \internal Hides the default button indicator. Called when non auto-default push button get focus. */ void QDialogPrivate::hideDefault() { Q_Q(QDialog); QList list = qFindChildren(q); for (int i=0; isetDefault(false); } } void QDialogPrivate::resetModalitySetByOpen() { Q_Q(QDialog); if (resetModalityTo != -1 && !q->testAttribute(Qt::WA_SetWindowModality)) { // open() changed the window modality and the user didn't touch it afterwards; restore it q->setWindowModality(Qt::WindowModality(resetModalityTo)); q->setAttribute(Qt::WA_SetWindowModality, wasModalitySet); #ifdef Q_WS_MAC Q_ASSERT(resetModalityTo != Qt::WindowModal); q->setParent(q->parentWidget(), Qt::Dialog); #endif } resetModalityTo = -1; } #ifdef Q_WS_WINCE #ifdef Q_WS_WINCE_WM void QDialogPrivate::_q_doneAction() { //Done... QApplication::postEvent(q_func(), new QEvent(QEvent::OkRequest)); } #endif /*! \reimp */ bool QDialog::event(QEvent *e) { bool result = QWidget::event(e); if (e->type() == QEvent::OkRequest) { accept(); result = true; } return result; } #endif /*! Returns the modal dialog's result code, \c Accepted or \c Rejected. Do not call this function if the dialog was constructed with the Qt::WA_DeleteOnClose attribute. */ int QDialog::result() const { Q_D(const QDialog); return d->rescode; } /*! \fn void QDialog::setResult(int i) Sets the modal dialog's result code to \a i. \note We recommend that you use one of the values defined by QDialog::DialogCode. */ void QDialog::setResult(int r) { Q_D(QDialog); d->rescode = r; } /*! \since 4.5 Shows the dialog as a \l{QDialog#Modal Dialogs}{window modal dialog}, returning immediately. \sa exec(), show(), result(), setWindowModality() */ void QDialog::open() { Q_D(QDialog); Qt::WindowModality modality = windowModality(); if (modality != Qt::WindowModal) { d->resetModalityTo = modality; d->wasModalitySet = testAttribute(Qt::WA_SetWindowModality); setWindowModality(Qt::WindowModal); setAttribute(Qt::WA_SetWindowModality, false); #ifdef Q_WS_MAC setParent(parentWidget(), Qt::Sheet); #endif } setResult(0); show(); } /*! Shows the dialog as a \l{QDialog#Modal Dialogs}{modal dialog}, blocking until the user closes it. The function returns a \l DialogCode result. If the dialog is \l{Qt::ApplicationModal}{application modal}, users cannot interact with any other window in the same application until they close the dialog. If the dialog is \l{Qt::ApplicationModal}{window modal}, only interaction with the parent window is blocked while the dialog is open. By default, the dialog is application modal. \sa open(), show(), result(), setWindowModality() */ int QDialog::exec() { Q_D(QDialog); if (d->eventLoop) { qWarning("QDialog::exec: Recursive call detected"); return -1; } bool deleteOnClose = testAttribute(Qt::WA_DeleteOnClose); setAttribute(Qt::WA_DeleteOnClose, false); d->resetModalitySetByOpen(); bool wasShowModal = testAttribute(Qt::WA_ShowModal); setAttribute(Qt::WA_ShowModal, true); setResult(0); //On Windows Mobile we create an empty menu to hide the current menu #ifdef Q_WS_WINCE_WM #ifndef QT_NO_MENUBAR QMenuBar *menuBar = 0; if (!findChild()) menuBar = new QMenuBar(this); if (qt_wince_is_smartphone()) { QAction *doneAction = new QAction(tr("Done"), this); menuBar->setDefaultAction(doneAction); connect(doneAction, SIGNAL(triggered()), this, SLOT(_q_doneAction())); } #endif //QT_NO_MENUBAR #endif //Q_WS_WINCE_WM #ifdef Q_OS_SYMBIAN #ifndef QT_NO_MENUBAR QMenuBar *menuBar = 0; if (!findChild()) menuBar = new QMenuBar(this); #endif if (qobject_cast(this)) showFullScreen(); else #endif // Q_OS_SYMBIAN show(); #ifdef Q_WS_MAC d->mac_nativeDialogModalHelp(); #endif QEventLoop eventLoop; d->eventLoop = &eventLoop; QPointer guard = this; (void) eventLoop.exec(QEventLoop::DialogExec); if (guard.isNull()) return QDialog::Rejected; d->eventLoop = 0; setAttribute(Qt::WA_ShowModal, wasShowModal); int res = result(); if (deleteOnClose) delete this; #ifdef Q_WS_WINCE_WM #ifndef QT_NO_MENUBAR else if (menuBar) delete menuBar; #endif //QT_NO_MENUBAR #endif //Q_WS_WINCE_WM #ifdef Q_OS_SYMBIAN #ifndef QT_NO_MENUBAR else if (menuBar) delete menuBar; #endif //QT_NO_MENUBAR #endif //Q_OS_SYMBIAN return res; } /*! Closes the dialog and sets its result code to \a r. If this dialog is shown with exec(), done() causes the local event loop to finish, and exec() to return \a r. As with QWidget::close(), done() deletes the dialog if the Qt::WA_DeleteOnClose flag is set. If the dialog is the application's main widget, the application terminates. If the dialog is the last window closed, the QApplication::lastWindowClosed() signal is emitted. \sa accept(), reject(), QApplication::activeWindow(), QApplication::quit() */ void QDialog::done(int r) { Q_D(QDialog); hide(); setResult(r); d->close_helper(QWidgetPrivate::CloseNoEvent); d->resetModalitySetByOpen(); emit finished(r); if (r == Accepted) emit accepted(); else if (r == Rejected) emit rejected(); } /*! Hides the modal dialog and sets the result code to \c Accepted. \sa reject() done() */ void QDialog::accept() { done(Accepted); } /*! Hides the modal dialog and sets the result code to \c Rejected. \sa accept() done() */ void QDialog::reject() { done(Rejected); } /*! \reimp */ bool QDialog::eventFilter(QObject *o, QEvent *e) { return QWidget::eventFilter(o, e); } /***************************************************************************** Event handlers *****************************************************************************/ #ifndef QT_NO_CONTEXTMENU /*! \reimp */ void QDialog::contextMenuEvent(QContextMenuEvent *e) { #if defined(QT_NO_WHATSTHIS) || defined(QT_NO_MENU) Q_UNUSED(e); #else QWidget *w = childAt(e->pos()); if (!w) { w = rect().contains(e->pos()) ? this : 0; if (!w) return; } while (w && w->whatsThis().size() == 0 && !w->testAttribute(Qt::WA_CustomWhatsThis)) w = w->isWindow() ? 0 : w->parentWidget(); if (w) { QMenu p(this); QAction *wt = p.addAction(tr("What's This?")); if (p.exec(e->globalPos()) == wt) { QHelpEvent e(QEvent::WhatsThis, w->rect().center(), w->mapToGlobal(w->rect().center())); QApplication::sendEvent(w, &e); } } #endif } #endif // QT_NO_CONTEXTMENU /*! \reimp */ void QDialog::keyPressEvent(QKeyEvent *e) { // Calls reject() if Escape is pressed. Simulates a button // click for the default button if Enter is pressed. Move focus // for the arrow keys. Ignore the rest. #ifdef Q_WS_MAC if(e->modifiers() == Qt::ControlModifier && e->key() == Qt::Key_Period) { reject(); } else #endif if (!e->modifiers() || (e->modifiers() & Qt::KeypadModifier && e->key() == Qt::Key_Enter)) { switch (e->key()) { case Qt::Key_Enter: case Qt::Key_Return: { QList list = qFindChildren(this); for (int i=0; iisDefault() && pb->isVisible()) { if (pb->isEnabled()) pb->click(); return; } } } break; case Qt::Key_Escape: reject(); break; case Qt::Key_Up: case Qt::Key_Left: if (focusWidget() && (focusWidget()->focusPolicy() == Qt::StrongFocus || focusWidget()->focusPolicy() == Qt::WheelFocus)) { e->ignore(); break; } // call ours, since c++ blocks us from calling the one // belonging to focusWidget(). focusNextPrevChild(false); break; case Qt::Key_Down: case Qt::Key_Right: if (focusWidget() && (focusWidget()->focusPolicy() == Qt::StrongFocus || focusWidget()->focusPolicy() == Qt::WheelFocus)) { e->ignore(); break; } focusNextPrevChild(true); break; default: e->ignore(); return; } } else { e->ignore(); } } /*! \reimp */ void QDialog::closeEvent(QCloseEvent *e) { #ifndef QT_NO_WHATSTHIS if (isModal() && QWhatsThis::inWhatsThisMode()) QWhatsThis::leaveWhatsThisMode(); #endif if (isVisible()) { QPointer that = this; reject(); if (that && isVisible()) e->ignore(); } else { e->accept(); } } /***************************************************************************** Geometry management. *****************************************************************************/ /*! \reimp */ void QDialog::setVisible(bool visible) { Q_D(QDialog); if (visible) { if (testAttribute(Qt::WA_WState_ExplicitShowHide) && !testAttribute(Qt::WA_WState_Hidden)) return; if (!testAttribute(Qt::WA_Moved)) { Qt::WindowStates state = windowState(); adjustPosition(parentWidget()); setAttribute(Qt::WA_Moved, false); // not really an explicit position if (state != windowState()) setWindowState(state); } QWidget::setVisible(visible); showExtension(d->doShowExtension); QWidget *fw = window()->focusWidget(); if (!fw) fw = this; /* The following block is to handle a special case, and does not really follow propper logic in concern of autoDefault and TAB order. However, it's here to ease usage for the users. If a dialog has a default QPushButton, and first widget in the TAB order also is a QPushButton, then we give focus to the main default QPushButton. This simplifies code for the developers, and actually catches most cases... If not, then they simply have to use [widget*]->setFocus() themselves... */ if (d->mainDef && fw->focusPolicy() == Qt::NoFocus) { QWidget *first = fw; while ((first = first->nextInFocusChain()) != fw && first->focusPolicy() == Qt::NoFocus) ; if (first != d->mainDef && qobject_cast(first)) d->mainDef->setFocus(); } if (!d->mainDef && isWindow()) { QWidget *w = fw; while ((w = w->nextInFocusChain()) != fw) { QPushButton *pb = qobject_cast(w); if (pb && pb->autoDefault() && pb->focusPolicy() != Qt::NoFocus) { pb->setDefault(true); break; } } } if (fw && !fw->hasFocus()) { QFocusEvent e(QEvent::FocusIn, Qt::TabFocusReason); QApplication::sendEvent(fw, &e); } #ifndef QT_NO_ACCESSIBILITY QAccessible::updateAccessibility(this, 0, QAccessible::DialogStart); #endif } else { if (testAttribute(Qt::WA_WState_ExplicitShowHide) && testAttribute(Qt::WA_WState_Hidden)) return; #ifndef QT_NO_ACCESSIBILITY if (isVisible()) QAccessible::updateAccessibility(this, 0, QAccessible::DialogEnd); #endif // Reimplemented to exit a modal event loop when the dialog is hidden. QWidget::setVisible(visible); if (d->eventLoop) d->eventLoop->exit(); } #ifdef Q_WS_WIN if (d->mainDef && isActiveWindow()) { BOOL snapToDefault = false; if (SystemParametersInfo(SPI_GETSNAPTODEFBUTTON, 0, &snapToDefault, 0)) { if (snapToDefault) QCursor::setPos(d->mainDef->mapToGlobal(d->mainDef->rect().center())); } } #endif } /*!\reimp */ void QDialog::showEvent(QShowEvent *event) { if (!event->spontaneous() && !testAttribute(Qt::WA_Moved)) { Qt::WindowStates state = windowState(); adjustPosition(parentWidget()); setAttribute(Qt::WA_Moved, false); // not really an explicit position if (state != windowState()) setWindowState(state); } } /*! \internal */ void QDialog::adjustPosition(QWidget* w) { #ifdef Q_WS_X11 // if the WM advertises that it will place the windows properly for us, let it do it :) if (X11->isSupportedByWM(ATOM(_NET_WM_FULL_PLACEMENT))) return; #endif QPoint p(0, 0); int extraw = 0, extrah = 0, scrn = 0; if (w) w = w->window(); QRect desk; if (w) { scrn = QApplication::desktop()->screenNumber(w); } else if (QApplication::desktop()->isVirtualDesktop()) { scrn = QApplication::desktop()->screenNumber(QCursor::pos()); } else { scrn = QApplication::desktop()->screenNumber(this); } desk = QApplication::desktop()->availableGeometry(scrn); QWidgetList list = QApplication::topLevelWidgets(); for (int i = 0; (extraw == 0 || extrah == 0) && i < list.size(); ++i) { QWidget * current = list.at(i); if (current->isVisible()) { int framew = current->geometry().x() - current->x(); int frameh = current->geometry().y() - current->y(); extraw = qMax(extraw, framew); extrah = qMax(extrah, frameh); } } // sanity check for decoration frames. With embedding, we // might get extraordinary values if (extraw == 0 || extrah == 0 || extraw >= 10 || extrah >= 40) { extrah = 40; extraw = 10; } if (w) { // Use mapToGlobal rather than geometry() in case w might // be embedded in another application QPoint pp = w->mapToGlobal(QPoint(0,0)); p = QPoint(pp.x() + w->width()/2, pp.y() + w->height()/ 2); } else { // p = middle of the desktop p = QPoint(desk.x() + desk.width()/2, desk.y() + desk.height()/2); } // p = origin of this p = QPoint(p.x()-width()/2 - extraw, p.y()-height()/2 - extrah); if (p.x() + extraw + width() > desk.x() + desk.width()) p.setX(desk.x() + desk.width() - width() - extraw); if (p.x() < desk.x()) p.setX(desk.x()); if (p.y() + extrah + height() > desk.y() + desk.height()) p.setY(desk.y() + desk.height() - height() - extrah); if (p.y() < desk.y()) p.setY(desk.y()); move(p); } /*! \obsolete If \a orientation is Qt::Horizontal, the extension will be displayed to the right of the dialog's main area. If \a orientation is Qt::Vertical, the extension will be displayed below the dialog's main area. Instead of using this functionality, we recommend that you simply call show() or hide() on the part of the dialog that you want to use as an extension. See the \l{Extension Example} for details. \sa setExtension() */ void QDialog::setOrientation(Qt::Orientation orientation) { Q_D(QDialog); d->orientation = orientation; } /*! \obsolete Returns the dialog's extension orientation. Instead of using this functionality, we recommend that you simply call show() or hide() on the part of the dialog that you want to use as an extension. See the \l{Extension Example} for details. \sa extension() */ Qt::Orientation QDialog::orientation() const { Q_D(const QDialog); return d->orientation; } /*! \obsolete Sets the widget, \a extension, to be the dialog's extension, deleting any previous extension. The dialog takes ownership of the extension. Note that if 0 is passed any existing extension will be deleted. This function must only be called while the dialog is hidden. Instead of using this functionality, we recommend that you simply call show() or hide() on the part of the dialog that you want to use as an extension. See the \l{Extension Example} for details. \sa showExtension(), setOrientation() */ void QDialog::setExtension(QWidget* extension) { Q_D(QDialog); delete d->extension; d->extension = extension; if (!extension) return; if (extension->parentWidget() != this) extension->setParent(this); extension->hide(); } /*! \obsolete Returns the dialog's extension or 0 if no extension has been defined. Instead of using this functionality, we recommend that you simply call show() or hide() on the part of the dialog that you want to use as an extension. See the \l{Extension Example} for details. \sa showExtension(), setOrientation() */ QWidget* QDialog::extension() const { Q_D(const QDialog); return d->extension; } /*! \obsolete If \a showIt is true, the dialog's extension is shown; otherwise the extension is hidden. Instead of using this functionality, we recommend that you simply call show() or hide() on the part of the dialog that you want to use as an extension. See the \l{Extension Example} for details. \sa show(), setExtension(), setOrientation() */ void QDialog::showExtension(bool showIt) { Q_D(QDialog); d->doShowExtension = showIt; if (!d->extension) return; if (!testAttribute(Qt::WA_WState_Visible)) return; if (d->extension->isVisible() == showIt) return; if (showIt) { d->size = size(); d->min = minimumSize(); d->max = maximumSize(); if (layout()) layout()->setEnabled(false); QSize s(d->extension->sizeHint() .expandedTo(d->extension->minimumSize()) .boundedTo(d->extension->maximumSize())); if (d->orientation == Qt::Horizontal) { int h = qMax(height(), s.height()); d->extension->setGeometry(width(), 0, s.width(), h); setFixedSize(width() + s.width(), h); } else { int w = qMax(width(), s.width()); d->extension->setGeometry(0, height(), w, s.height()); setFixedSize(w, height() + s.height()); } d->extension->show(); #ifndef QT_NO_SIZEGRIP const bool sizeGripEnabled = isSizeGripEnabled(); setSizeGripEnabled(false); d->sizeGripEnabled = sizeGripEnabled; #endif } else { d->extension->hide(); // workaround for CDE window manager that won't shrink with (-1,-1) setMinimumSize(d->min.expandedTo(QSize(1, 1))); setMaximumSize(d->max); resize(d->size); if (layout()) layout()->setEnabled(true); #ifndef QT_NO_SIZEGRIP setSizeGripEnabled(d->sizeGripEnabled); #endif } } /*! \reimp */ QSize QDialog::sizeHint() const { Q_D(const QDialog); if (d->extension) { if (d->orientation == Qt::Horizontal) return QSize(QWidget::sizeHint().width(), qMax(QWidget::sizeHint().height(),d->extension->sizeHint().height())); else return QSize(qMax(QWidget::sizeHint().width(), d->extension->sizeHint().width()), QWidget::sizeHint().height()); } return QWidget::sizeHint(); } /*! \reimp */ QSize QDialog::minimumSizeHint() const { Q_D(const QDialog); if (d->extension) { if (d->orientation == Qt::Horizontal) return QSize(QWidget::minimumSizeHint().width(), qMax(QWidget::minimumSizeHint().height(), d->extension->minimumSizeHint().height())); else return QSize(qMax(QWidget::minimumSizeHint().width(), d->extension->minimumSizeHint().width()), QWidget::minimumSizeHint().height()); } return QWidget::minimumSizeHint(); } /*! \property QDialog::modal \brief whether show() should pop up the dialog as modal or modeless By default, this property is false and show() pops up the dialog as modeless. Setting his property to true is equivalent to setting QWidget::windowModality to Qt::ApplicationModal. exec() ignores the value of this property and always pops up the dialog as modal. \sa QWidget::windowModality, show(), exec() */ void QDialog::setModal(bool modal) { setAttribute(Qt::WA_ShowModal, modal); } bool QDialog::isSizeGripEnabled() const { #ifndef QT_NO_SIZEGRIP Q_D(const QDialog); return !!d->resizer; #else return false; #endif } void QDialog::setSizeGripEnabled(bool enabled) { #ifdef QT_NO_SIZEGRIP Q_UNUSED(enabled); #else Q_D(QDialog); #ifndef QT_NO_SIZEGRIP d->sizeGripEnabled = enabled; if (enabled && d->doShowExtension) return; #endif if (!enabled != !d->resizer) { if (enabled) { d->resizer = new QSizeGrip(this); // adjustSize() processes all events, which is suboptimal d->resizer->resize(d->resizer->sizeHint()); if (isRightToLeft()) d->resizer->move(rect().bottomLeft() -d->resizer->rect().bottomLeft()); else d->resizer->move(rect().bottomRight() -d->resizer->rect().bottomRight()); d->resizer->raise(); d->resizer->show(); } else { delete d->resizer; d->resizer = 0; } } #endif //QT_NO_SIZEGRIP } /*! \reimp */ void QDialog::resizeEvent(QResizeEvent *) { #ifndef QT_NO_SIZEGRIP Q_D(QDialog); if (d->resizer) { if (isRightToLeft()) d->resizer->move(rect().bottomLeft() -d->resizer->rect().bottomLeft()); else d->resizer->move(rect().bottomRight() -d->resizer->rect().bottomRight()); d->resizer->raise(); } #endif } /*! \fn void QDialog::finished(int result) \since 4.1 This signal is emitted when the dialog's \a result code has been set, either by the user or by calling done(), accept(), or reject(). Note that this signal is \e not emitted when hiding the dialog with hide() or setVisible(false). This includes deleting the dialog while it is visible. \sa accepted(), rejected() */ /*! \fn void QDialog::accepted() \since 4.1 This signal is emitted when the dialog has been accepted either by the user or by calling accept() or done() with the QDialog::Accepted argument. Note that this signal is \e not emitted when hiding the dialog with hide() or setVisible(false). This includes deleting the dialog while it is visible. \sa finished(), rejected() */ /*! \fn void QDialog::rejected() \since 4.1 This signal is emitted when the dialog has been rejected either by the user or by calling reject() or done() with the QDialog::Rejected argument. Note that this signal is \e not emitted when hiding the dialog with hide() or setVisible(false). This includes deleting the dialog while it is visible. \sa finished(), accepted() */ QT_END_NAMESPACE #include "moc_qdialog.cpp"