/**************************************************************************** ** ** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). ** Contact: Nokia Corporation (qt-info@nokia.com) ** ** This file is part of the QtGui module of the Qt Toolkit. ** ** $QT_BEGIN_LICENSE:LGPL$ ** No Commercial Usage ** This file contains pre-release code and may not be distributed. ** You may use this file in accordance with the terms and conditions ** contained in the either Technology Preview License Agreement or the ** Beta Release License Agreement. ** ** GNU Lesser General Public License Usage ** Alternatively, this file may be used under the terms of the GNU Lesser ** General Public License version 2.1 as published by the Free Software ** Foundation and appearing in the file LICENSE.LGPL included in the ** packaging of this file. Please review the following information to ** ensure the GNU Lesser General Public License version 2.1 requirements ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. ** ** In addition, as a special exception, Nokia gives you certain ** additional rights. These rights are described in the Nokia Qt LGPL ** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this ** package. ** ** GNU General Public License Usage ** Alternatively, this file may be used under the terms of the GNU ** General Public License version 3.0 as published by the Free Software ** Foundation and appearing in the file LICENSE.GPL included in the ** packaging of this file. Please review the following information to ** ensure the GNU General Public License version 3.0 requirements will be ** met: http://www.gnu.org/copyleft/gpl.html. ** ** If you are unsure which license is appropriate for your use, please ** contact the sales department at http://www.qtsoftware.com/contact. ** $QT_END_LICENSE$ ** ****************************************************************************/ #include #ifndef QT_NO_MESSAGEBOX #include #include "private/qlabel_p.h" #include "private/qapplication_p.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include "qdialog_p.h" #include #include #include #ifdef Q_WS_WINCE extern bool qt_wince_is_mobile(); //defined in qguifunctions_wince.cpp extern bool qt_wince_is_smartphone();//defined in qguifunctions_wince.cpp extern bool qt_wince_is_pocket_pc(); //defined in qguifunctions_wince.cpp #include "qguifunctions_wince.h" #endif QT_BEGIN_NAMESPACE enum Button { Old_Ok = 1, Old_Cancel = 2, Old_Yes = 3, Old_No = 4, Old_Abort = 5, Old_Retry = 6, Old_Ignore = 7, Old_YesAll = 8, Old_NoAll = 9, Old_ButtonMask = 0xFF, NewButtonMask = 0xFFFFFC00 }; enum DetailButtonLabel { ShowLabel = 0, HideLabel = 1 }; #ifndef QT_NO_TEXTEDIT class QMessageBoxDetailsText : public QWidget { public: class TextEdit : public QTextEdit { public: TextEdit(QWidget *parent=0) : QTextEdit(parent) { } void contextMenuEvent(QContextMenuEvent * e) { #ifndef QT_NO_CONTEXTMENU QMenu *menu = createStandardContextMenu(); menu->exec(e->globalPos()); delete menu; #else Q_UNUSED(e); #endif } }; QMessageBoxDetailsText(QWidget *parent=0) : QWidget(parent) { QVBoxLayout *layout = new QVBoxLayout; layout->setMargin(0); QFrame *line = new QFrame(this); line->setFrameShape(QFrame::HLine); line->setFrameShadow(QFrame::Sunken); layout->addWidget(line); textEdit = new TextEdit(); textEdit->setFixedHeight(100); textEdit->setFocusPolicy(Qt::NoFocus); textEdit->setReadOnly(true); layout->addWidget(textEdit); setLayout(layout); } void setText(const QString &text) { textEdit->setPlainText(text); } QString text() const { return textEdit->toPlainText(); } QString label(DetailButtonLabel label) { return label == ShowLabel ? QMessageBox::tr("Show Details...") : QMessageBox::tr("Hide Details..."); } private: TextEdit *textEdit; }; #endif // QT_NO_TEXTEDIT class QMessageBoxPrivate : public QDialogPrivate { Q_DECLARE_PUBLIC(QMessageBox) public: QMessageBoxPrivate() : escapeButton(0), defaultButton(0), clickedButton(0), detailsButton(0), #ifndef QT_NO_TEXTEDIT detailsText(0), #endif compatMode(false), autoAddOkButton(true), detectedEscapeButton(0), informativeLabel(0) { } void init(const QString &title = QString(), const QString &text = QString()); void _q_buttonClicked(QAbstractButton *); QAbstractButton *findButton(int button0, int button1, int button2, int flags); void addOldButtons(int button0, int button1, int button2); QAbstractButton *abstractButtonForId(int id) const; int execReturnCode(QAbstractButton *button); void detectEscapeButton(); void updateSize(); int layoutMinimumWidth(); void retranslateStrings(); #ifdef Q_WS_WINCE void hideSpecial(); #endif static int showOldMessageBox(QWidget *parent, QMessageBox::Icon icon, const QString &title, const QString &text, int button0, int button1, int button2); static int showOldMessageBox(QWidget *parent, QMessageBox::Icon icon, const QString &title, const QString &text, const QString &button0Text, const QString &button1Text, const QString &button2Text, int defaultButtonNumber, int escapeButtonNumber); static QMessageBox::StandardButton showNewMessageBox(QWidget *parent, QMessageBox::Icon icon, const QString& title, const QString& text, QMessageBox::StandardButtons buttons, QMessageBox::StandardButton defaultButton); static QPixmap standardIcon(QMessageBox::Icon icon, QMessageBox *mb); QLabel *label; QMessageBox::Icon icon; QLabel *iconLabel; QDialogButtonBox *buttonBox; QList customButtonList; QAbstractButton *escapeButton; QPushButton *defaultButton; QAbstractButton *clickedButton; QPushButton *detailsButton; #ifndef QT_NO_TEXTEDIT QMessageBoxDetailsText *detailsText; #endif bool compatMode; bool autoAddOkButton; QAbstractButton *detectedEscapeButton; QLabel *informativeLabel; QPointer receiverToDisconnectOnClose; QByteArray memberToDisconnectOnClose; QByteArray signalToDisconnectOnClose; }; void QMessageBoxPrivate::init(const QString &title, const QString &text) { Q_Q(QMessageBox); label = new QLabel; label->setObjectName(QLatin1String("qt_msgbox_label")); label->setTextInteractionFlags(Qt::TextInteractionFlags(q->style()->styleHint(QStyle::SH_MessageBox_TextInteractionFlags, 0, q))); label->setAlignment(Qt::AlignVCenter | Qt::AlignLeft); label->setOpenExternalLinks(true); #if defined(Q_WS_MAC) label->setContentsMargins(16, 0, 0, 0); #elif !defined(Q_WS_QWS) label->setContentsMargins(2, 0, 0, 0); label->setIndent(9); #endif icon = QMessageBox::NoIcon; iconLabel = new QLabel; iconLabel->setObjectName(QLatin1String("qt_msgboxex_icon_label")); iconLabel->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::Fixed); buttonBox = new QDialogButtonBox; buttonBox->setObjectName(QLatin1String("qt_msgbox_buttonbox")); buttonBox->setCenterButtons(q->style()->styleHint(QStyle::SH_MessageBox_CenterButtons, 0, q)); QObject::connect(buttonBox, SIGNAL(clicked(QAbstractButton*)), q, SLOT(_q_buttonClicked(QAbstractButton*))); QGridLayout *grid = new QGridLayout; #ifndef Q_WS_MAC grid->addWidget(iconLabel, 0, 0, 2, 1, Qt::AlignTop); grid->addWidget(label, 0, 1, 1, 1); // -- leave space for information label -- grid->addWidget(buttonBox, 2, 0, 1, 2); #else grid->setMargin(0); grid->setVerticalSpacing(8); grid->setHorizontalSpacing(0); q->setContentsMargins(24, 15, 24, 20); grid->addWidget(iconLabel, 0, 0, 2, 1, Qt::AlignTop | Qt::AlignLeft); grid->addWidget(label, 0, 1, 1, 1); // -- leave space for information label -- grid->setRowStretch(1, 100); grid->setRowMinimumHeight(2, 6); grid->addWidget(buttonBox, 3, 1, 1, 1); #endif grid->setSizeConstraint(QLayout::SetNoConstraint); q->setLayout(grid); if (!title.isEmpty() || !text.isEmpty()) { q->setWindowTitle(title); q->setText(text); } q->setModal(true); #ifdef Q_WS_MAC QFont f = q->font(); f.setBold(true); label->setFont(f); #endif retranslateStrings(); } int QMessageBoxPrivate::layoutMinimumWidth() { layout->activate(); return layout->totalMinimumSize().width(); } void QMessageBoxPrivate::updateSize() { Q_Q(QMessageBox); if (!q->isVisible()) return; QSize screenSize = QApplication::desktop()->availableGeometry(QCursor::pos()).size(); #if defined(Q_WS_QWS) || defined(Q_WS_WINCE) || defined(Q_OS_SYMBIAN) // the width of the screen, less the window border. int hardLimit = screenSize.width() - (q->frameGeometry().width() - q->geometry().width()); #else int hardLimit = qMin(screenSize.width() - 480, 1000); // can never get bigger than this // on small screens allows the messagebox be the same size as the screen if (screenSize.width() <= 1024) hardLimit = screenSize.width(); #endif #ifdef Q_WS_MAC int softLimit = qMin(screenSize.width()/2, 420); #elif defined(Q_WS_QWS) int softLimit = qMin(hardLimit, 500); #else // note: ideally on windows, hard and soft limits but it breaks compat #ifndef Q_WS_WINCE int softLimit = qMin(screenSize.width()/2, 500); #else int softLimit = qMin(screenSize.width() * 3 / 4, 500); #endif //Q_WS_WINCE #endif if (informativeLabel) informativeLabel->setSizePolicy(QSizePolicy::Ignored, QSizePolicy::Ignored); label->setWordWrap(false); // makes the label return min size int width = layoutMinimumWidth(); if (width > softLimit) { label->setWordWrap(true); width = qMax(softLimit, layoutMinimumWidth()); if (width > hardLimit) { label->d_func()->ensureTextControl(); if (QTextControl *control = label->d_func()->control) { QTextOption opt = control->document()->defaultTextOption(); opt.setWrapMode(QTextOption::WrapAnywhere); control->document()->setDefaultTextOption(opt); } width = hardLimit; } } if (informativeLabel) { label->setSizePolicy(QSizePolicy::Ignored, QSizePolicy::Ignored); QSizePolicy policy(QSizePolicy::Minimum, QSizePolicy::Preferred); policy.setHeightForWidth(true); informativeLabel->setSizePolicy(policy); width = qMax(width, layoutMinimumWidth()); if (width > hardLimit) { // longest word is really big, so wrap anywhere informativeLabel->d_func()->ensureTextControl(); if (QTextControl *control = informativeLabel->d_func()->control) { QTextOption opt = control->document()->defaultTextOption(); opt.setWrapMode(QTextOption::WrapAnywhere); control->document()->setDefaultTextOption(opt); } width = hardLimit; } policy.setHeightForWidth(label->wordWrap()); label->setSizePolicy(policy); } QFontMetrics fm(QApplication::font("QWorkspaceTitleBar")); int windowTitleWidth = qMin(fm.width(q->windowTitle()) + 50, hardLimit); if (windowTitleWidth > width) width = windowTitleWidth; layout->activate(); int height = (layout->hasHeightForWidth()) ? layout->totalHeightForWidth(width) : layout->totalMinimumSize().height(); q->setFixedSize(width, height); QCoreApplication::removePostedEvents(q, QEvent::LayoutRequest); } #ifdef Q_WS_WINCE /*! \internal Hides special buttons which are rather shown in the title bar on WinCE, to conserve screen space. */ void QMessageBoxPrivate::hideSpecial() { Q_Q(QMessageBox); QList list = qFindChildren(q); for (int i=0; itext(); text.remove(QChar::fromLatin1('&')); if (text == QApplication::translate("QMessageBox", "OK" )) pb->setFixedSize(0,0); } } #endif static int oldButton(int button) { switch (button & QMessageBox::ButtonMask) { case QMessageBox::Ok: return Old_Ok; case QMessageBox::Cancel: return Old_Cancel; case QMessageBox::Yes: return Old_Yes; case QMessageBox::No: return Old_No; case QMessageBox::Abort: return Old_Abort; case QMessageBox::Retry: return Old_Retry; case QMessageBox::Ignore: return Old_Ignore; case QMessageBox::YesToAll: return Old_YesAll; case QMessageBox::NoToAll: return Old_NoAll; default: return 0; } } int QMessageBoxPrivate::execReturnCode(QAbstractButton *button) { int ret = buttonBox->standardButton(button); if (ret == QMessageBox::NoButton) { ret = customButtonList.indexOf(button); // if button == 0, correctly sets ret = -1 } else if (compatMode) { ret = oldButton(ret); } return ret; } void QMessageBoxPrivate::_q_buttonClicked(QAbstractButton *button) { Q_Q(QMessageBox); #ifndef QT_NO_TEXTEDIT if (detailsButton && detailsText && button == detailsButton) { detailsButton->setText(detailsText->isHidden() ? detailsText->label(HideLabel) : detailsText->label(ShowLabel)); detailsText->setHidden(!detailsText->isHidden()); updateSize(); } else #endif { clickedButton = button; q->done(execReturnCode(button)); // does not trigger closeEvent emit q->buttonClicked(button); if (receiverToDisconnectOnClose) { QObject::disconnect(q, signalToDisconnectOnClose, receiverToDisconnectOnClose, memberToDisconnectOnClose); receiverToDisconnectOnClose = 0; } signalToDisconnectOnClose.clear(); memberToDisconnectOnClose.clear(); } } /*! \class QMessageBox \brief The QMessageBox class provides a modal dialog for informing the user or for asking the user a question and receiving an answer. \ingroup dialogs \mainclass A message box displays a primary \l{QMessageBox::text}{text} to alert the user to a situation, an \l{QMessageBox::informativeText} {informative text} to further explain the alert or to ask the user a question, and an optional \l{QMessageBox::detailedText} {detailed text} to provide even more data if the user requests it. A message box can also display an \l{QMessageBox::icon} {icon} and \l{QMessageBox::standardButtons} {standard buttons} for accepting a user response. Two APIs for using QMessageBox are provided, the property-based API, and the static functions. Calling one of the static functions is the simpler approach, but it is less flexible than using the property-based API, and the result is less informative. Using the property-based API is recommended. \section1 The Property-based API To use the property-based API, construct an instance of QMessageBox, set the desired properties, and call exec() to show the message. The simplest configuration is to set only the \l{QMessageBox::text} {message text} property. \snippet doc/src/snippets/code/src_gui_dialogs_qmessagebox.cpp 5 The user must click the \gui{OK} button to dismiss the message box. The rest of the GUI is blocked until the message box is dismissed. \image msgbox1.png A better approach than just alerting the user to an event is to also ask the user what to do about it. Store the question in the \l{QMessageBox::informativeText} {informative text} property, and set the \l{QMessageBox::standardButtons} {standard buttons} property to the set of buttons you want as the set of user responses. The buttons are specified by combining values from StandardButtons using the bitwise OR operator. The display order for the buttons is platform-dependent. For example, on Windows, \gui{Save} is displayed to the left of \gui{Cancel}, whereas on Mac OS, the order is reversed. Mark one of your standard buttons to be your \l{QMessageBox::defaultButton()} {default button}. \snippet doc/src/snippets/code/src_gui_dialogs_qmessagebox.cpp 6 This is the approach recommended in the \l{http://developer.apple.com/documentation/UserExperience/Conceptual/AppleHIGuidelines/XHIGWindows/chapter_18_section_7.html} {Mac OS X Guidlines}. Similar guidlines apply for the other platforms, but note the different ways the \l{QMessageBox::informativeText} {informative text} is handled for different platforms. \image msgbox2.png The exec() slot returns the StandardButtons value of the button that was clicked. \snippet doc/src/snippets/code/src_gui_dialogs_qmessagebox.cpp 7 To give the user more information to help him answer the question, set the \l{QMessageBox::detailedText} {detailed text} property. If the \l{QMessageBox::detailedText} {detailed text} property is set, the \gui{Show Details...} button will be shown. \image msgbox3.png Clicking the \gui{Show Details...} button displays the detailed text. \image msgbox4.png \section2 Rich Text and the Text Format Property The \l{QMessageBox::detailedText} {detailed text} property is always interpreted as plain text. The \l{QMessageBox::text} {main text} and \l{QMessageBox::informativeText} {informative text} properties can be either plain text or rich text. These strings are interpreted according to the setting of the \l{QMessageBox::textFormat} {text format} property. The default setting is \l{Qt::AutoText} {auto-text}. Note that for some plain text strings containing XML meta-characters, the auto-text \l{Qt::mightBeRichText()} {rich text detection test} may fail causing your plain text string to be interpreted incorrectly as rich text. In these rare cases, use Qt::convertFromPlainText() to convert your plain text string to a visually equivalent rich text string, or set the \l{QMessageBox::textFormat} {text format} property explicitly with setTextFormat(). \section2 Severity Levels and the Icon and Pixmap Properties QMessageBox supports four predefined message severity levels, or message types, which really only differ in the predefined icon they each show. Specify one of the four predefined message types by setting the \l{QMessageBox::icon}{icon} property to one of the \l{QMessageBox::Icon}{predefined icons}. The following rules are guidelines: \table \row \o \img qmessagebox-quest.png \o \l Question \o For asking a question during normal operations. \row \o \img qmessagebox-info.png \o \l Information \o For reporting information about normal operations. \row \o \img qmessagebox-warn.png \o \l Warning \o For reporting non-critical errors. \row \o \img qmessagebox-crit.png \o \l Critical \o For reporting critical errors. \endtable \l{QMessageBox::Icon}{Predefined icons} are not defined by QMessageBox, but provided by the style. The default value is \l{QMessageBox::NoIcon} {No Icon}. The message boxes are otherwise the same for all cases. When using a standard icon, use the one recommended in the table, or use the one recommended by the style guidelines for your platform. If none of the standard icons is right for your message box, you can use a custom icon by setting the \l{QMessageBox::iconPixmap}{icon pixmap} property instead of setting the \l{QMessageBox::icon}{icon} property. In summary, to set an icon, use \e{either} setIcon() for one of the standard icons, \e{or} setIconPixmap() for a custom icon. \section1 The Static Functions API Building message boxes with the static functions API, although convenient, is less flexible than using the property-based API, because the static function signatures lack parameters for setting the \l{QMessageBox::informativeText} {informative text} and \l{QMessageBox::detailedText} {detailed text} properties. One work-around for this has been to use the \c{title} parameter as the message box main text and the \c{text} parameter as the message box informative text. Because this has the obvious drawback of making a less readable message box, platform guidelines do not recommend it. The \e{Microsoft Windows User Interface Guidelines} recommend using the \l{QCoreApplication::applicationName} {application name} as the \l{QMessageBox::setWindowTitle()} {window's title}, which means that if you have an informative text in addition to your main text, you must concatenate it to the \c{text} parameter. Note that the static function signatures have changed with respect to their button parameters, which are now used to set the \l{QMessageBox::standardButtons} {standard buttons} and the \l{QMessageBox::defaultButton()} {default button}. Static functions are available for creating information(), question(), warning(), and critical() message boxes. \snippet doc/src/snippets/code/src_gui_dialogs_qmessagebox.cpp 0 The \l{dialogs/standarddialogs}{Standard Dialogs} example shows how to use QMessageBox and the other built-in Qt dialogs. \section1 Advanced Usage If the \l{QMessageBox::StandardButtons} {standard buttons} are not flexible enough for your message box, you can use the addButton() overload that takes a text and a ButtonRoleto to add custom buttons. The ButtonRole is used by QMessageBox to determine the ordering of the buttons on screen (which varies according to the platform). You can test the value of clickedButton() after calling exec(). For example, \snippet doc/src/snippets/code/src_gui_dialogs_qmessagebox.cpp 2 \section1 Default and Escape Keys The default button (i.e., the button activated when \key Enter is pressed) can be specified using setDefaultButton(). If a default button is not specified, QMessageBox tries to find one based on the \l{ButtonRole} {button roles} of the buttons used in the message box. The escape button (the button activated when \key Esc is pressed) can be specified using setEscapeButton(). If an escape button is not specified, QMessageBox tries to find one using these rules: \list 1 \o If there is only one button, it is the button activated when \key Esc is pressed. \o If there is a \l Cancel button, it is the button activated when \key Esc is pressed. \o If there is exactly one button having either \l{QMessageBox::RejectRole} {the Reject role} or the \l{QMessageBox::NoRole} {the No role}, it is the button activated when \key Esc is pressed. \endlist When an escape button can't be determined using these rules, pressing \key Esc has no effect. \sa QDialogButtonBox, {fowler}{GUI Design Handbook: Message Box}, {Standard Dialogs Example}, {Application Example} */ /*! \enum QMessageBox::StandardButton \since 4.2 These enums describe flags for standard buttons. Each button has a defined \l ButtonRole. \value Ok An "OK" button defined with the \l AcceptRole. \value Open A "Open" button defined with the \l AcceptRole. \value Save A "Save" button defined with the \l AcceptRole. \value Cancel A "Cancel" button defined with the \l RejectRole. \value Close A "Close" button defined with the \l RejectRole. \value Discard A "Discard" or "Don't Save" button, depending on the platform, defined with the \l DestructiveRole. \value Apply An "Apply" button defined with the \l ApplyRole. \value Reset A "Reset" button defined with the \l ResetRole. \value RestoreDefaults A "Restore Defaults" button defined with the \l ResetRole. \value Help A "Help" button defined with the \l HelpRole. \value SaveAll A "Save All" button defined with the \l AcceptRole. \value Yes A "Yes" button defined with the \l YesRole. \value YesToAll A "Yes to All" button defined with the \l YesRole. \value No A "No" button defined with the \l NoRole. \value NoToAll A "No to All" button defined with the \l NoRole. \value Abort An "Abort" button defined with the \l RejectRole. \value Retry A "Retry" button defined with the \l AcceptRole. \value Ignore An "Ignore" button defined with the \l AcceptRole. \value NoButton An invalid button. \omitvalue FirstButton \omitvalue LastButton The following values are obsolete: \value YesAll Use YesToAll instead. \value NoAll Use NoToAll instead. \value Default Use the \c defaultButton argument of information(), warning(), etc. instead, or call setDefaultButton(). \value Escape Call setEscapeButton() instead. \value FlagMask \value ButtonMask \sa ButtonRole, standardButtons */ /*! \fn void QMessageBox::buttonClicked(QAbstractButton *button) This signal is emitted whenever a button is clicked inside the QMessageBox. The button that was clicked in returned in \a button. */ /*! Constructs a message box with no text and no buttons. \a parent is passed to the QDialog constructor. On Mac OS X, if you want your message box to appear as a Qt::Sheet of its \a parent, set the message box's \l{setWindowModality()} {window modality} to Qt::WindowModal or use open(). Otherwise, the message box will be a standard dialog. */ QMessageBox::QMessageBox(QWidget *parent) : QDialog(*new QMessageBoxPrivate, parent, Qt::MSWindowsFixedSizeDialogHint | Qt::WindowTitleHint | Qt::WindowSystemMenuHint | Qt::WindowCloseButtonHint) { Q_D(QMessageBox); d->init(); } /*! Constructs a message box with the given \a icon, \a title, \a text, and standard \a buttons. Standard or custom buttons can be added at any time using addButton(). The \a parent and \a f arguments are passed to the QDialog constructor. If \a parent is 0, the message box is an \l{Qt::ApplicationModal} {application modal} dialog box. If \a parent is a widget, the message box is \l{Qt::WindowModal} {window modal} relative to \a parent. On Mac OS X, if \a parent is not 0 and you want your message box to appear as a Qt::Sheet of that parent, set the message box's \l{setWindowModality()} {window modality} to Qt::WindowModal (default). Otherwise, the message box will be a standard dialog. \sa setWindowTitle(), setText(), setIcon(), setStandardButtons() */ QMessageBox::QMessageBox(Icon icon, const QString &title, const QString &text, StandardButtons buttons, QWidget *parent, Qt::WindowFlags f) : QDialog(*new QMessageBoxPrivate, parent, f | Qt::MSWindowsFixedSizeDialogHint | Qt::WindowTitleHint | Qt::WindowSystemMenuHint | Qt::WindowCloseButtonHint) { Q_D(QMessageBox); d->init(title, text); setIcon(icon); if (buttons != NoButton) setStandardButtons(buttons); } /*! Destroys the message box. */ QMessageBox::~QMessageBox() { } /*! \since 4.2 Adds the given \a button to the message box with the specified \a role. \sa removeButton(), button(), setStandardButtons() */ void QMessageBox::addButton(QAbstractButton *button, ButtonRole role) { Q_D(QMessageBox); if (!button) return; removeButton(button); d->buttonBox->addButton(button, (QDialogButtonBox::ButtonRole)role); d->customButtonList.append(button); d->autoAddOkButton = false; } /*! \since 4.2 \overload Creates a button with the given \a text, adds it to the message box for the specified \a role, and returns it. */ QPushButton *QMessageBox::addButton(const QString& text, ButtonRole role) { Q_D(QMessageBox); QPushButton *pushButton = new QPushButton(text); addButton(pushButton, role); d->updateSize(); return pushButton; } /*! \since 4.2 \overload Adds a standard \a button to the message box if it is valid to do so, and returns the push button. \sa setStandardButtons() */ QPushButton *QMessageBox::addButton(StandardButton button) { Q_D(QMessageBox); QPushButton *pushButton = d->buttonBox->addButton((QDialogButtonBox::StandardButton)button); if (pushButton) d->autoAddOkButton = false; return pushButton; } /*! \since 4.2 Removes \a button from the button box without deleting it. \sa addButton(), setStandardButtons() */ void QMessageBox::removeButton(QAbstractButton *button) { Q_D(QMessageBox); d->customButtonList.removeAll(button); if (d->escapeButton == button) d->escapeButton = 0; if (d->defaultButton == button) d->defaultButton = 0; d->buttonBox->removeButton(button); d->updateSize(); } /*! \property QMessageBox::standardButtons \brief collection of standard buttons in the message box \since 4.2 This property controls which standard buttons are used by the message box. By default, this property contains no standard buttons. \sa addButton() */ void QMessageBox::setStandardButtons(StandardButtons buttons) { Q_D(QMessageBox); d->buttonBox->setStandardButtons(QDialogButtonBox::StandardButtons(int(buttons))); QList buttonList = d->buttonBox->buttons(); if (!buttonList.contains(d->escapeButton)) d->escapeButton = 0; if (!buttonList.contains(d->defaultButton)) d->defaultButton = 0; d->autoAddOkButton = false; d->updateSize(); } QMessageBox::StandardButtons QMessageBox::standardButtons() const { Q_D(const QMessageBox); return QMessageBox::StandardButtons(int(d->buttonBox->standardButtons())); } /*! \since 4.2 Returns the standard button enum value corresponding to the given \a button, or NoButton if the given \a button isn't a standard button. \sa button(), standardButtons() */ QMessageBox::StandardButton QMessageBox::standardButton(QAbstractButton *button) const { Q_D(const QMessageBox); return (QMessageBox::StandardButton)d->buttonBox->standardButton(button); } /*! \since 4.2 Returns a pointer corresponding to the standard button \a which, or 0 if the standard button doesn't exist in this message box. \sa standardButtons, standardButton() */ QAbstractButton *QMessageBox::button(StandardButton which) const { Q_D(const QMessageBox); return d->buttonBox->button(QDialogButtonBox::StandardButton(which)); } /*! \since 4.2 Returns the button that is activated when escape is pressed. By default, QMessageBox attempts to automatically detect an escape button as follows: \list 1 \o If there is only one button, it is made the escape button. \o If there is a \l Cancel button, it is made the escape button. \o On Mac OS X only, if there is exactly one button with the role QMessageBox::RejectRole, it is made the escape button. \endlist When an escape button could not be automatically detected, pressing \key Esc has no effect. \sa addButton() */ QAbstractButton *QMessageBox::escapeButton() const { Q_D(const QMessageBox); return d->escapeButton; } /*! \since 4.2 Sets the button that gets activated when the \key Escape key is pressed to \a button. \sa addButton(), clickedButton() */ void QMessageBox::setEscapeButton(QAbstractButton *button) { Q_D(QMessageBox); if (d->buttonBox->buttons().contains(button)) d->escapeButton = button; } /*! \since 4.3 Sets the buttons that gets activated when the \key Escape key is pressed to \a button. \sa addButton(), clickedButton() */ void QMessageBox::setEscapeButton(QMessageBox::StandardButton button) { Q_D(QMessageBox); setEscapeButton(d->buttonBox->button(QDialogButtonBox::StandardButton(button))); } void QMessageBoxPrivate::detectEscapeButton() { if (escapeButton) { // escape button explicitly set detectedEscapeButton = escapeButton; return; } // Cancel button automatically becomes escape button detectedEscapeButton = buttonBox->button(QDialogButtonBox::Cancel); if (detectedEscapeButton) return; // If there is only one button, make it the escape button const QList buttons = buttonBox->buttons(); if (buttons.count() == 1) { detectedEscapeButton = buttons.first(); return; } // if the message box has one RejectRole button, make it the escape button for (int i = 0; i < buttons.count(); i++) { if (buttonBox->buttonRole(buttons.at(i)) == QDialogButtonBox::RejectRole) { if (detectedEscapeButton) { // already detected! detectedEscapeButton = 0; break; } detectedEscapeButton = buttons.at(i); } } if (detectedEscapeButton) return; // if the message box has one NoRole button, make it the escape button for (int i = 0; i < buttons.count(); i++) { if (buttonBox->buttonRole(buttons.at(i)) == QDialogButtonBox::NoRole) { if (detectedEscapeButton) { // already detected! detectedEscapeButton = 0; break; } detectedEscapeButton = buttons.at(i); } } } /*! \since 4.2 Returns the button that was clicked by the user, or 0 if the user hit the \key Esc key and no \l{setEscapeButton()}{escape button} was set. If exec() hasn't been called yet, returns 0. Example: \snippet doc/src/snippets/code/src_gui_dialogs_qmessagebox.cpp 3 \sa standardButton(), button() */ QAbstractButton *QMessageBox::clickedButton() const { Q_D(const QMessageBox); return d->clickedButton; } /*! \since 4.2 Returns the button that should be the message box's \l{QPushButton::setDefault()}{default button}. Returns 0 if no default button was set. \sa addButton(), QPushButton::setDefault() */ QPushButton *QMessageBox::defaultButton() const { Q_D(const QMessageBox); return d->defaultButton; } /*! \since 4.2 Sets the message box's \l{QPushButton::setDefault()}{default button} to \a button. \sa addButton(), QPushButton::setDefault() */ void QMessageBox::setDefaultButton(QPushButton *button) { Q_D(QMessageBox); if (!d->buttonBox->buttons().contains(button)) return; d->defaultButton = button; button->setDefault(true); button->setFocus(); } /*! \since 4.3 Sets the message box's \l{QPushButton::setDefault()}{default button} to \a button. \sa addButton(), QPushButton::setDefault() */ void QMessageBox::setDefaultButton(QMessageBox::StandardButton button) { Q_D(QMessageBox); setDefaultButton(d->buttonBox->button(QDialogButtonBox::StandardButton(button))); } /*! \property QMessageBox::text \brief the message box text to be displayed. The text will be interpreted either as a plain text or as rich text, depending on the text format setting (\l QMessageBox::textFormat). The default setting is Qt::AutoText, i.e., the message box will try to auto-detect the format of the text. The default value of this property is an empty string. \sa textFormat, QMessageBox::informativeText, QMessageBox::detailedText */ QString QMessageBox::text() const { Q_D(const QMessageBox); return d->label->text(); } void QMessageBox::setText(const QString &text) { Q_D(QMessageBox); d->label->setText(text); d->label->setWordWrap(d->label->textFormat() == Qt::RichText || (d->label->textFormat() == Qt::AutoText && Qt::mightBeRichText(text))); d->updateSize(); } /*! \enum QMessageBox::Icon This enum has the following values: \value NoIcon the message box does not have any icon. \value Question an icon indicating that the message is asking a question. \value Information an icon indicating that the message is nothing out of the ordinary. \value Warning an icon indicating that the message is a warning, but can be dealt with. \value Critical an icon indicating that the message represents a critical problem. */ /*! \property QMessageBox::icon \brief the message box's icon The icon of the message box can be specified with one of the values: \list \o QMessageBox::NoIcon \o QMessageBox::Question \o QMessageBox::Information \o QMessageBox::Warning \o QMessageBox::Critical \endlist The default is QMessageBox::NoIcon. The pixmap used to display the actual icon depends on the current \l{QWidget::style()} {GUI style}. You can also set a custom pixmap for the icon by setting the \l{QMessageBox::iconPixmap} {icon pixmap} property. \sa iconPixmap */ QMessageBox::Icon QMessageBox::icon() const { Q_D(const QMessageBox); return d->icon; } void QMessageBox::setIcon(Icon icon) { Q_D(QMessageBox); setIconPixmap(QMessageBoxPrivate::standardIcon((QMessageBox::Icon)icon, this)); d->icon = icon; } /*! \property QMessageBox::iconPixmap \brief the current icon The icon currently used by the message box. Note that it's often hard to draw one pixmap that looks appropriate in all GUI styles; you may want to supply a different pixmap for each platform. By default, this property is undefined. \sa icon */ QPixmap QMessageBox::iconPixmap() const { Q_D(const QMessageBox); if (d->iconLabel && d->iconLabel->pixmap()) return *d->iconLabel->pixmap(); return QPixmap(); } void QMessageBox::setIconPixmap(const QPixmap &pixmap) { Q_D(QMessageBox); d->iconLabel->setPixmap(pixmap); d->updateSize(); d->icon = NoIcon; } /*! \property QMessageBox::textFormat \brief the format of the text displayed by the message box The current text format used by the message box. See the \l Qt::TextFormat enum for an explanation of the possible options. The default format is Qt::AutoText. \sa setText() */ Qt::TextFormat QMessageBox::textFormat() const { Q_D(const QMessageBox); return d->label->textFormat(); } void QMessageBox::setTextFormat(Qt::TextFormat format) { Q_D(QMessageBox); d->label->setTextFormat(format); d->label->setWordWrap(format == Qt::RichText || (format == Qt::AutoText && Qt::mightBeRichText(d->label->text()))); d->updateSize(); } /*! \reimp */ bool QMessageBox::event(QEvent *e) { bool result =QDialog::event(e); switch (e->type()) { case QEvent::LayoutRequest: d_func()->updateSize(); break; case QEvent::LanguageChange: d_func()->retranslateStrings(); break; #ifdef Q_WS_WINCE case QEvent::OkRequest: case QEvent::HelpRequest: { QString bName = (e->type() == QEvent::OkRequest) ? QApplication::translate("QMessageBox", "OK") : QApplication::translate("QMessageBox", "Help"); QList list = qFindChildren(this); for (int i=0; itext() == bName) { if (pb->isEnabled()) pb->click(); return pb->isEnabled(); } } } #endif default: break; } return result; } /*! \reimp */ void QMessageBox::resizeEvent(QResizeEvent *event) { QDialog::resizeEvent(event); } /*! \reimp */ void QMessageBox::closeEvent(QCloseEvent *e) { Q_D(QMessageBox); if (!d->detectedEscapeButton) { e->ignore(); return; } QDialog::closeEvent(e); d->clickedButton = d->detectedEscapeButton; setResult(d->execReturnCode(d->detectedEscapeButton)); } /*! \reimp */ void QMessageBox::changeEvent(QEvent *ev) { Q_D(QMessageBox); switch (ev->type()) { case QEvent::StyleChange: { if (d->icon != NoIcon) setIcon(d->icon); Qt::TextInteractionFlags flags(style()->styleHint(QStyle::SH_MessageBox_TextInteractionFlags, 0, this)); d->label->setTextInteractionFlags(flags); d->buttonBox->setCenterButtons(style()->styleHint(QStyle::SH_MessageBox_CenterButtons, 0, this)); if (d->informativeLabel) d->informativeLabel->setTextInteractionFlags(flags); // intentional fall through } case QEvent::FontChange: case QEvent::ApplicationFontChange: #ifdef Q_WS_MAC { QFont f = font(); f.setBold(true); d->label->setFont(f); } #endif default: break; } QDialog::changeEvent(ev); } /*! \reimp */ void QMessageBox::keyPressEvent(QKeyEvent *e) { Q_D(QMessageBox); if (e->key() == Qt::Key_Escape #ifdef Q_WS_MAC || (e->modifiers() == Qt::ControlModifier && e->key() == Qt::Key_Period) #endif ) { if (d->detectedEscapeButton) { #ifdef Q_WS_MAC d->detectedEscapeButton->animateClick(); #else d->detectedEscapeButton->click(); #endif } return; } #if defined (Q_OS_WIN) && !defined(QT_NO_CLIPBOARD) && !defined(QT_NO_SHORTCUT) if (e == QKeySequence::Copy) { QString separator = QString::fromLatin1("---------------------------\n"); QString textToCopy = separator; separator.prepend(QLatin1Char('\n')); textToCopy += windowTitle() + separator; // title textToCopy += d->label->text() + separator; // text if (d->informativeLabel) textToCopy += d->informativeLabel->text() + separator; QString buttonTexts; QList buttons = d->buttonBox->buttons(); for (int i = 0; i < buttons.count(); i++) { buttonTexts += buttons[i]->text() + QLatin1String(" "); } textToCopy += buttonTexts + separator; QApplication::clipboard()->setText(textToCopy); return; } #endif //QT_NO_SHORTCUT QT_NO_CLIPBOARD Q_OS_WIN #ifndef QT_NO_SHORTCUT if (!(e->modifiers() & Qt::AltModifier)) { int key = e->key() & ~((int)Qt::MODIFIER_MASK|(int)Qt::UNICODE_ACCEL); if (key) { const QList buttons = d->buttonBox->buttons(); for (int i = 0; i < buttons.count(); ++i) { QAbstractButton *pb = buttons.at(i); int acc = pb->shortcut() & ~((int)Qt::MODIFIER_MASK|(int)Qt::UNICODE_ACCEL); if (acc == key) { pb->animateClick(); return; } } } } #endif QDialog::keyPressEvent(e); } #ifdef Q_WS_WINCE /*! \reimp */ void QMessageBox::setVisible(bool visible) { Q_D(QMessageBox); if (visible) d->hideSpecial(); QDialog::setVisible(visible); } #endif /*! \overload Opens the dialog and connects its finished() or buttonClicked() signal to the slot specified by \a receiver and \a member. If the slot in \a member has a pointer for its first parameter the connection is to buttonClicked(), otherwise the connection is to finished(). The signal will be disconnected from the slot when the dialog is closed. */ void QMessageBox::open(QObject *receiver, const char *member) { Q_D(QMessageBox); const char *signal = member && strchr(member, '*') ? SIGNAL(buttonClicked(QAbstractButton*)) : SIGNAL(finished(int)); connect(this, signal, receiver, member); d->signalToDisconnectOnClose = signal; d->receiverToDisconnectOnClose = receiver; d->memberToDisconnectOnClose = member; QDialog::open(); } /*! \since 4.5 Returns a list of all the buttons that have been added to the message box. \sa buttonRole(), addButton(), removeButton() */ QList QMessageBox::buttons() const { Q_D(const QMessageBox); return d->buttonBox->buttons(); } /*! \since 4.5 Returns the button role for the specified \a button. This function returns \l InvalidRole if \a button is 0 or has not been added to the message box. \sa buttons(), addButton() */ QMessageBox::ButtonRole QMessageBox::buttonRole(QAbstractButton *button) const { Q_D(const QMessageBox); return QMessageBox::ButtonRole(d->buttonBox->buttonRole(button)); } /*! \reimp */ void QMessageBox::showEvent(QShowEvent *e) { Q_D(QMessageBox); if (d->autoAddOkButton) { addButton(Ok); #if defined(Q_WS_WINCE) d->hideSpecial(); #endif } if (d->detailsButton) addButton(d->detailsButton, QMessageBox::ActionRole); d->detectEscapeButton(); d->updateSize(); #ifndef QT_NO_ACCESSIBILITY QAccessible::updateAccessibility(this, 0, QAccessible::Alert); #endif #ifdef Q_WS_WIN HMENU systemMenu = GetSystemMenu((HWND)winId(), FALSE); if (!d->detectedEscapeButton) { EnableMenuItem(systemMenu, SC_CLOSE, MF_BYCOMMAND|MF_GRAYED); } else { EnableMenuItem(systemMenu, SC_CLOSE, MF_BYCOMMAND|MF_ENABLED); } #endif QDialog::showEvent(e); } static QMessageBox::StandardButton showNewMessageBox(QWidget *parent, QMessageBox::Icon icon, const QString& title, const QString& text, QMessageBox::StandardButtons buttons, QMessageBox::StandardButton defaultButton) { // necessary for source compatibility with Qt 4.0 and 4.1 // handles (Yes, No) and (Yes|Default, No) if (defaultButton && !(buttons & defaultButton)) return (QMessageBox::StandardButton) QMessageBoxPrivate::showOldMessageBox(parent, icon, title, text, int(buttons), int(defaultButton), 0); QMessageBox msgBox(icon, title, text, QMessageBox::NoButton, parent); QDialogButtonBox *buttonBox = qFindChild(&msgBox); Q_ASSERT(buttonBox != 0); uint mask = QMessageBox::FirstButton; while (mask <= QMessageBox::LastButton) { uint sb = buttons & mask; mask <<= 1; if (!sb) continue; QPushButton *button = msgBox.addButton((QMessageBox::StandardButton)sb); // Choose the first accept role as the default if (msgBox.defaultButton()) continue; if ((defaultButton == QMessageBox::NoButton && buttonBox->buttonRole(button) == QDialogButtonBox::AcceptRole) || (defaultButton != QMessageBox::NoButton && sb == uint(defaultButton))) msgBox.setDefaultButton(button); } if (msgBox.exec() == -1) return QMessageBox::Cancel; return msgBox.standardButton(msgBox.clickedButton()); } /*! \since 4.2 Opens an information message box with the specified \a title and \a text. The standard \a buttons are added to the message box. \a defaultButton specifies the button used when \key Enter is pressed. \a defaultButton must refer to a button that was given in \a buttons. If \a defaultButton is QMessageBox::NoButton, QMessageBox chooses a suitable default automatically. Returns the identity of the standard button that was clicked. If \key Esc was pressed instead, the \l{Default and Escape Keys} {escape button} is returned. If \a parent is 0, the message box is an \l{Qt::ApplicationModal} {application modal} dialog box. If \a parent is a widget, the message box is \l{Qt::WindowModal} {window modal} relative to \a parent. \sa question(), warning(), critical() */ QMessageBox::StandardButton QMessageBox::information(QWidget *parent, const QString &title, const QString& text, StandardButtons buttons, StandardButton defaultButton) { return showNewMessageBox(parent, Information, title, text, buttons, defaultButton); } /*! \since 4.2 Opens a question message box with the specified \a title and \a text. The standard \a buttons are added to the message box. \a defaultButton specifies the button used when \key Enter is pressed. \a defaultButton must refer to a button that was given in \a buttons. If \a defaultButton is QMessageBox::NoButton, QMessageBox chooses a suitable default automatically. Returns the identity of the standard button that was clicked. If \key Esc was pressed instead, the \l{Default and Escape Keys} {escape button} is returned. If \a parent is 0, the message box is an \l{Qt::ApplicationModal} {application modal} dialog box. If \a parent is a widget, the message box is \l{Qt::WindowModal} {window modal} relative to \a parent. \sa information(), warning(), critical() */ QMessageBox::StandardButton QMessageBox::question(QWidget *parent, const QString &title, const QString& text, StandardButtons buttons, StandardButton defaultButton) { return showNewMessageBox(parent, Question, title, text, buttons, defaultButton); } /*! \since 4.2 Opens a warning message box with the specified \a title and \a text. The standard \a buttons are added to the message box. \a defaultButton specifies the button used when \key Enter is pressed. \a defaultButton must refer to a button that was given in \a buttons. If \a defaultButton is QMessageBox::NoButton, QMessageBox chooses a suitable default automatically. Returns the identity of the standard button that was clicked. If \key Esc was pressed instead, the \l{Default and Escape Keys} {escape button} is returned. If \a parent is 0, the message box is an \l{Qt::ApplicationModal} {application modal} dialog box. If \a parent is a widget, the message box is \l{Qt::WindowModal} {window modal} relative to \a parent. \sa question(), information(), critical() */ QMessageBox::StandardButton QMessageBox::warning(QWidget *parent, const QString &title, const QString& text, StandardButtons buttons, StandardButton defaultButton) { return showNewMessageBox(parent, Warning, title, text, buttons, defaultButton); } /*! \since 4.2 Opens a critical message box with the specified \a title and \a text. The standard \a buttons are added to the message box. \a defaultButton specifies the button used when \key Enter is pressed. \a defaultButton must refer to a button that was given in \a buttons. If \a defaultButton is QMessageBox::NoButton, QMessageBox chooses a suitable default automatically. Returns the identity of the standard button that was clicked. If \key Esc was pressed instead, the \l{Default and Escape Keys} {escape button} is returned. If \a parent is 0, the message box is an \l{Qt::ApplicationModal} {application modal} dialog box. If \a parent is a widget, the message box is \l{Qt::WindowModal} {window modal} relative to \a parent. \warning Do not delete \a parent during the execution of the dialog. If you want to do this, you should create the dialog yourself using one of the QMessageBox constructors. \sa question(), warning(), information() */ QMessageBox::StandardButton QMessageBox::critical(QWidget *parent, const QString &title, const QString& text, StandardButtons buttons, StandardButton defaultButton) { return showNewMessageBox(parent, Critical, title, text, buttons, defaultButton); } /*! Displays a simple about box with title \a title and text \a text. The about box's parent is \a parent. about() looks for a suitable icon in four locations: \list 1 \o It prefers \link QWidget::windowIcon() parent->icon() \endlink if that exists. \o If not, it tries the top-level widget containing \a parent. \o If that fails, it tries the \link QApplication::activeWindow() active window. \endlink \o As a last resort it uses the Information icon. \endlist The about box has a single button labelled "OK". On Mac OS X, the about box is popped up as a modeless window; on other platforms, it is currently a window modal. \sa QWidget::windowIcon(), QApplication::activeWindow() */ void QMessageBox::about(QWidget *parent, const QString &title, const QString &text) { #ifdef Q_WS_MAC static QPointer oldMsgBox; if (oldMsgBox && oldMsgBox->text() == text) { oldMsgBox->show(); oldMsgBox->raise(); oldMsgBox->activateWindow(); return; } #endif QMessageBox *msgBox = new QMessageBox(title, text, Information, 0, 0, 0, parent #ifdef Q_WS_MAC , Qt::WindowTitleHint | Qt::WindowSystemMenuHint #endif ); msgBox->setAttribute(Qt::WA_DeleteOnClose); QIcon icon = msgBox->windowIcon(); QSize size = icon.actualSize(QSize(64, 64)); msgBox->setIconPixmap(icon.pixmap(size)); // should perhaps be a style hint #ifdef Q_WS_MAC oldMsgBox = msgBox; #if 0 // ### doesn't work until close button is enabled in title bar msgBox->d_func()->autoAddOkButton = false; #else msgBox->d_func()->buttonBox->setCenterButtons(true); #endif msgBox->show(); #else msgBox->exec(); #endif } /*! Displays a simple message box about Qt, with the given \a title and centered over \a parent (if \a parent is not 0). The message includes the version number of Qt being used by the application. This is useful for inclusion in the \gui Help menu of an application, as shown in the \l{mainwindows/menus}{Menus} example. QApplication provides this functionality as a slot. On Mac OS X, the about box is popped up as a modeless window; on other platforms, it is currently window modal. \sa QApplication::aboutQt() */ void QMessageBox::aboutQt(QWidget *parent, const QString &title) { #ifdef Q_WS_MAC static QPointer oldMsgBox; if (oldMsgBox) { oldMsgBox->show(); oldMsgBox->raise(); oldMsgBox->activateWindow(); return; } #endif QString translatedTextAboutQtCaption; translatedTextAboutQtCaption = QMessageBox::tr( "

About Qt

" "

This program uses Qt version %1.

" ).arg(QLatin1String(QT_VERSION_STR)); QString translatedTextAboutQtText; translatedTextAboutQtText = QMessageBox::tr( "

Qt is a C++ toolkit for cross-platform application " "development.

" "

Qt provides single-source portability across MS Windows, " "Mac OS X, Linux, and all major commercial Unix variants. " "Qt is also available for embedded devices as Qt for Embedded Linux " "and Qt for Windows CE.

" "

Qt is available under three different licensing options designed " "to accommodate the needs of our various users.

" "

Qt licensed under our commercial license agreement is appropriate " "for development of proprietary/commercial software where you do not " "want to share any source code with third parties or otherwise cannot " "comply with the terms of the GNU LGPL version 2.1 or GNU GPL version " "3.0.

" "

Qt licensed under the GNU LGPL version 2.1 is appropriate for the " "development of Qt applications (proprietary or open source) provided " "you can comply with the terms and conditions of the GNU LGPL version " "2.1.

" "

Qt licensed under the GNU General Public License version 3.0 is " "appropriate for the development of Qt applications where you wish to " "use such applications in combination with software subject to the " "terms of the GNU GPL version 3.0 or where you are otherwise willing " "to comply with the terms of the GNU GPL version 3.0.

" "

Please see www.qtsoftware.com/products/licensing " "for an overview of Qt licensing.

" "

Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).

" "

Qt is a Nokia product. See www.qtsoftware.com/qt " "for more information.

" ); QMessageBox *msgBox = new QMessageBox(parent); msgBox->setAttribute(Qt::WA_DeleteOnClose); msgBox->setWindowTitle(title.isEmpty() ? tr("About Qt") : title); msgBox->setText(translatedTextAboutQtCaption); msgBox->setInformativeText(translatedTextAboutQtText); QPixmap pm(QLatin1String(":/trolltech/qmessagebox/images/qtlogo-64.png")); if (!pm.isNull()) msgBox->setIconPixmap(pm); #if defined(Q_WS_WINCE) msgBox->setDefaultButton(msgBox->addButton(QMessageBox::Ok)); #endif // should perhaps be a style hint #ifdef Q_WS_MAC oldMsgBox = msgBox; #if 0 // ### doesn't work until close button is enabled in title bar msgBox->d_func()->autoAddOkButton = false; #else msgBox->d_func()->buttonBox->setCenterButtons(true); #endif msgBox->show(); #else msgBox->exec(); #endif } /*! \internal */ QSize QMessageBox::sizeHint() const { // ### Qt 5: remove return QDialog::sizeHint(); } ///////////////////////////////////////////////////////////////////////////////////////// // Source and binary compatibility routines for 4.0 and 4.1 static QMessageBox::StandardButton newButton(int button) { // this is needed for source compatibility with Qt 4.0 and 4.1 if (button == QMessageBox::NoButton || (button & NewButtonMask)) return QMessageBox::StandardButton(button & QMessageBox::ButtonMask); #if QT_VERSION < 0x050000 // this is needed for binary compatibility with Qt 4.0 and 4.1 switch (button & Old_ButtonMask) { case Old_Ok: return QMessageBox::Ok; case Old_Cancel: return QMessageBox::Cancel; case Old_Yes: return QMessageBox::Yes; case Old_No: return QMessageBox::No; case Old_Abort: return QMessageBox::Abort; case Old_Retry: return QMessageBox::Retry; case Old_Ignore: return QMessageBox::Ignore; case Old_YesAll: return QMessageBox::YesToAll; case Old_NoAll: return QMessageBox::NoToAll; default: return QMessageBox::NoButton; } #endif } static bool detectedCompat(int button0, int button1, int button2) { if (button0 != 0 && !(button0 & NewButtonMask)) return true; if (button1 != 0 && !(button1 & NewButtonMask)) return true; if (button2 != 0 && !(button2 & NewButtonMask)) return true; return false; } QAbstractButton *QMessageBoxPrivate::findButton(int button0, int button1, int button2, int flags) { Q_Q(QMessageBox); int button = 0; if (button0 & flags) { button = button0; } else if (button1 & flags) { button = button1; } else if (button2 & flags) { button = button2; } return q->button(newButton(button)); } void QMessageBoxPrivate::addOldButtons(int button0, int button1, int button2) { Q_Q(QMessageBox); q->addButton(newButton(button0)); q->addButton(newButton(button1)); q->addButton(newButton(button2)); q->setDefaultButton( static_cast(findButton(button0, button1, button2, QMessageBox::Default))); q->setEscapeButton(findButton(button0, button1, button2, QMessageBox::Escape)); compatMode = detectedCompat(button0, button1, button2); } QAbstractButton *QMessageBoxPrivate::abstractButtonForId(int id) const { Q_Q(const QMessageBox); QAbstractButton *result = customButtonList.value(id); if (result) return result; if (id & QMessageBox::FlagMask) // for compatibility with Qt 4.0/4.1 (even if it is silly) return 0; return q->button(newButton(id)); } int QMessageBoxPrivate::showOldMessageBox(QWidget *parent, QMessageBox::Icon icon, const QString &title, const QString &text, int button0, int button1, int button2) { QMessageBox messageBox(icon, title, text, QMessageBox::NoButton, parent); messageBox.d_func()->addOldButtons(button0, button1, button2); return messageBox.exec(); } int QMessageBoxPrivate::showOldMessageBox(QWidget *parent, QMessageBox::Icon icon, const QString &title, const QString &text, const QString &button0Text, const QString &button1Text, const QString &button2Text, int defaultButtonNumber, int escapeButtonNumber) { QMessageBox messageBox(icon, title, text, QMessageBox::NoButton, parent); QString myButton0Text = button0Text; if (myButton0Text.isEmpty()) myButton0Text = QDialogButtonBox::tr("OK"); messageBox.addButton(myButton0Text, QMessageBox::ActionRole); if (!button1Text.isEmpty()) messageBox.addButton(button1Text, QMessageBox::ActionRole); if (!button2Text.isEmpty()) messageBox.addButton(button2Text, QMessageBox::ActionRole); const QList &buttonList = messageBox.d_func()->customButtonList; messageBox.setDefaultButton(static_cast(buttonList.value(defaultButtonNumber))); messageBox.setEscapeButton(buttonList.value(escapeButtonNumber)); return messageBox.exec(); } void QMessageBoxPrivate::retranslateStrings() { #ifndef QT_NO_TEXTEDIT if (detailsButton) detailsButton->setText(detailsText->isHidden() ? detailsText->label(HideLabel) : detailsText->label(ShowLabel)); #endif } /*! \obsolete Constructs a message box with a \a title, a \a text, an \a icon, and up to three buttons. The \a icon must be one of the following: \list \o QMessageBox::NoIcon \o QMessageBox::Question \o QMessageBox::Information \o QMessageBox::Warning \o QMessageBox::Critical \endlist Each button, \a button0, \a button1 and \a button2, can have one of the following values: \list \o QMessageBox::NoButton \o QMessageBox::Ok \o QMessageBox::Cancel \o QMessageBox::Yes \o QMessageBox::No \o QMessageBox::Abort \o QMessageBox::Retry \o QMessageBox::Ignore \o QMessageBox::YesAll \o QMessageBox::NoAll \endlist Use QMessageBox::NoButton for the later parameters to have fewer than three buttons in your message box. If you don't specify any buttons at all, QMessageBox will provide an Ok button. One of the buttons can be OR-ed with the QMessageBox::Default flag to make it the default button (clicked when Enter is pressed). One of the buttons can be OR-ed with the QMessageBox::Escape flag to make it the cancel or close button (clicked when \key Esc is pressed). \snippet doc/src/snippets/dialogs/dialogs.cpp 2 If \a parent is 0, the message box is an \l{Qt::ApplicationModal} {application modal} dialog box. If \a parent is a widget, the message box is \l{Qt::WindowModal} {window modal} relative to \a parent. The \a parent and \a f arguments are passed to the QDialog constructor. \sa setWindowTitle(), setText(), setIcon() */ QMessageBox::QMessageBox(const QString &title, const QString &text, Icon icon, int button0, int button1, int button2, QWidget *parent, Qt::WindowFlags f) : QDialog(*new QMessageBoxPrivate, parent, f /*| Qt::MSWindowsFixedSizeDialogHint #### */| Qt::WindowTitleHint | Qt::WindowSystemMenuHint | Qt::WindowCloseButtonHint) { Q_D(QMessageBox); d->init(title, text); setIcon(icon); d->addOldButtons(button0, button1, button2); } /*! \obsolete Opens an information message box with the given \a title and the \a text. The dialog may have up to three buttons. Each of the buttons, \a button0, \a button1 and \a button2 may be set to one of the following values: \list \o QMessageBox::NoButton \o QMessageBox::Ok \o QMessageBox::Cancel \o QMessageBox::Yes \o QMessageBox::No \o QMessageBox::Abort \o QMessageBox::Retry \o QMessageBox::Ignore \o QMessageBox::YesAll \o QMessageBox::NoAll \endlist If you don't want all three buttons, set the last button, or last two buttons to QMessageBox::NoButton. One button can be OR-ed with QMessageBox::Default, and one button can be OR-ed with QMessageBox::Escape. Returns the identity (QMessageBox::Ok, or QMessageBox::No, etc.) of the button that was clicked. If \a parent is 0, the message box is an \l{Qt::ApplicationModal} {application modal} dialog box. If \a parent is a widget, the message box is \l{Qt::WindowModal} {window modal} relative to \a parent. \warning Do not delete \a parent during the execution of the dialog. If you want to do this, you should create the dialog yourself using one of the QMessageBox constructors. \sa question(), warning(), critical() */ int QMessageBox::information(QWidget *parent, const QString &title, const QString& text, int button0, int button1, int button2) { return QMessageBoxPrivate::showOldMessageBox(parent, Information, title, text, button0, button1, button2); } /*! \obsolete \overload Displays an information message box with the given \a title and \a text, as well as one, two or three buttons. Returns the index of the button that was clicked (0, 1 or 2). \a button0Text is the text of the first button, and is optional. If \a button0Text is not supplied, "OK" (translated) will be used. \a button1Text is the text of the second button, and is optional. \a button2Text is the text of the third button, and is optional. \a defaultButtonNumber (0, 1 or 2) is the index of the default button; pressing Return or Enter is the same as clicking the default button. It defaults to 0 (the first button). \a escapeButtonNumber is the index of the escape button; pressing \key Esc is the same as clicking this button. It defaults to -1; supply 0, 1 or 2 to make pressing \key Esc equivalent to clicking the relevant button. If \a parent is 0, the message box is an \l{Qt::ApplicationModal} {application modal} dialog box. If \a parent is a widget, the message box is \l{Qt::WindowModal} {window modal} relative to \a parent. \warning Do not delete \a parent during the execution of the dialog. If you want to do this, you should create the dialog yourself using one of the QMessageBox constructors. \sa question(), warning(), critical() */ int QMessageBox::information(QWidget *parent, const QString &title, const QString& text, const QString& button0Text, const QString& button1Text, const QString& button2Text, int defaultButtonNumber, int escapeButtonNumber) { return QMessageBoxPrivate::showOldMessageBox(parent, Information, title, text, button0Text, button1Text, button2Text, defaultButtonNumber, escapeButtonNumber); } /*! \obsolete Opens a question message box with the given \a title and \a text. The dialog may have up to three buttons. Each of the buttons, \a button0, \a button1 and \a button2 may be set to one of the following values: \list \o QMessageBox::NoButton \o QMessageBox::Ok \o QMessageBox::Cancel \o QMessageBox::Yes \o QMessageBox::No \o QMessageBox::Abort \o QMessageBox::Retry \o QMessageBox::Ignore \o QMessageBox::YesAll \o QMessageBox::NoAll \endlist If you don't want all three buttons, set the last button, or last two buttons to QMessageBox::NoButton. One button can be OR-ed with QMessageBox::Default, and one button can be OR-ed with QMessageBox::Escape. Returns the identity (QMessageBox::Yes, or QMessageBox::No, etc.) of the button that was clicked. If \a parent is 0, the message box is an \l{Qt::ApplicationModal} {application modal} dialog box. If \a parent is a widget, the message box is \l{Qt::WindowModal} {window modal} relative to \a parent. \warning Do not delete \a parent during the execution of the dialog. If you want to do this, you should create the dialog yourself using one of the QMessageBox constructors. \sa information(), warning(), critical() */ int QMessageBox::question(QWidget *parent, const QString &title, const QString& text, int button0, int button1, int button2) { return QMessageBoxPrivate::showOldMessageBox(parent, Question, title, text, button0, button1, button2); } /*! \obsolete \overload Displays a question message box with the given \a title and \a text, as well as one, two or three buttons. Returns the index of the button that was clicked (0, 1 or 2). \a button0Text is the text of the first button, and is optional. If \a button0Text is not supplied, "OK" (translated) will be used. \a button1Text is the text of the second button, and is optional. \a button2Text is the text of the third button, and is optional. \a defaultButtonNumber (0, 1 or 2) is the index of the default button; pressing Return or Enter is the same as clicking the default button. It defaults to 0 (the first button). \a escapeButtonNumber is the index of the Escape button; pressing Escape is the same as clicking this button. It defaults to -1; supply 0, 1 or 2 to make pressing Escape equivalent to clicking the relevant button. If \a parent is 0, the message box is an \l{Qt::ApplicationModal} {application modal} dialog box. If \a parent is a widget, the message box is \l{Qt::WindowModal} {window modal} relative to \a parent. \warning Do not delete \a parent during the execution of the dialog. If you want to do this, you should create the dialog yourself using one of the QMessageBox constructors. \sa information(), warning(), critical() */ int QMessageBox::question(QWidget *parent, const QString &title, const QString& text, const QString& button0Text, const QString& button1Text, const QString& button2Text, int defaultButtonNumber, int escapeButtonNumber) { return QMessageBoxPrivate::showOldMessageBox(parent, Question, title, text, button0Text, button1Text, button2Text, defaultButtonNumber, escapeButtonNumber); } /*! \obsolete Opens a warning message box with the given \a title and \a text. The dialog may have up to three buttons. Each of the button parameters, \a button0, \a button1 and \a button2 may be set to one of the following values: \list \o QMessageBox::NoButton \o QMessageBox::Ok \o QMessageBox::Cancel \o QMessageBox::Yes \o QMessageBox::No \o QMessageBox::Abort \o QMessageBox::Retry \o QMessageBox::Ignore \o QMessageBox::YesAll \o QMessageBox::NoAll \endlist If you don't want all three buttons, set the last button, or last two buttons to QMessageBox::NoButton. One button can be OR-ed with QMessageBox::Default, and one button can be OR-ed with QMessageBox::Escape. Returns the identity (QMessageBox::Ok or QMessageBox::No or ...) of the button that was clicked. If \a parent is 0, the message box is an \l{Qt::ApplicationModal} {application modal} dialog box. If \a parent is a widget, the message box is \l{Qt::WindowModal} {window modal} relative to \a parent. \warning Do not delete \a parent during the execution of the dialog. If you want to do this, you should create the dialog yourself using one of the QMessageBox constructors. \sa information(), question(), critical() */ int QMessageBox::warning(QWidget *parent, const QString &title, const QString& text, int button0, int button1, int button2) { return QMessageBoxPrivate::showOldMessageBox(parent, Warning, title, text, button0, button1, button2); } /*! \obsolete \overload Displays a warning message box with the given \a title and \a text, as well as one, two, or three buttons. Returns the number of the button that was clicked (0, 1, or 2). \a button0Text is the text of the first button, and is optional. If \a button0Text is not supplied, "OK" (translated) will be used. \a button1Text is the text of the second button, and is optional, and \a button2Text is the text of the third button, and is optional. \a defaultButtonNumber (0, 1 or 2) is the index of the default button; pressing Return or Enter is the same as clicking the default button. It defaults to 0 (the first button). \a escapeButtonNumber is the index of the Escape button; pressing Escape is the same as clicking this button. It defaults to -1; supply 0, 1, or 2 to make pressing Escape equivalent to clicking the relevant button. If \a parent is 0, the message box is an \l{Qt::ApplicationModal} {application modal} dialog box. If \a parent is a widget, the message box is \l{Qt::WindowModal} {window modal} relative to \a parent. \warning Do not delete \a parent during the execution of the dialog. If you want to do this, you should create the dialog yourself using one of the QMessageBox constructors. \sa information(), question(), critical() */ int QMessageBox::warning(QWidget *parent, const QString &title, const QString& text, const QString& button0Text, const QString& button1Text, const QString& button2Text, int defaultButtonNumber, int escapeButtonNumber) { return QMessageBoxPrivate::showOldMessageBox(parent, Warning, title, text, button0Text, button1Text, button2Text, defaultButtonNumber, escapeButtonNumber); } /*! \obsolete Opens a critical message box with the given \a title and \a text. The dialog may have up to three buttons. Each of the button parameters, \a button0, \a button1 and \a button2 may be set to one of the following values: \list \o QMessageBox::NoButton \o QMessageBox::Ok \o QMessageBox::Cancel \o QMessageBox::Yes \o QMessageBox::No \o QMessageBox::Abort \o QMessageBox::Retry \o QMessageBox::Ignore \o QMessageBox::YesAll \o QMessageBox::NoAll \endlist If you don't want all three buttons, set the last button, or last two buttons to QMessageBox::NoButton. One button can be OR-ed with QMessageBox::Default, and one button can be OR-ed with QMessageBox::Escape. Returns the identity (QMessageBox::Ok, or QMessageBox::No, etc.) of the button that was clicked. If \a parent is 0, the message box is an \l{Qt::ApplicationModal} {application modal} dialog box. If \a parent is a widget, the message box is \l{Qt::WindowModal} {window modal} relative to \a parent. \warning Do not delete \a parent during the execution of the dialog. If you want to do this, you should create the dialog yourself using one of the QMessageBox constructors. \sa information(), question(), warning() */ int QMessageBox::critical(QWidget *parent, const QString &title, const QString& text, int button0, int button1, int button2) { return QMessageBoxPrivate::showOldMessageBox(parent, Critical, title, text, button0, button1, button2); } /*! \obsolete \overload Displays a critical error message box with the given \a title and \a text, as well as one, two, or three buttons. Returns the number of the button that was clicked (0, 1 or 2). \a button0Text is the text of the first button, and is optional. If \a button0Text is not supplied, "OK" (translated) will be used. \a button1Text is the text of the second button, and is optional, and \a button2Text is the text of the third button, and is optional. \a defaultButtonNumber (0, 1 or 2) is the index of the default button; pressing Return or Enter is the same as clicking the default button. It defaults to 0 (the first button). \a escapeButtonNumber is the index of the Escape button; pressing Escape is the same as clicking this button. It defaults to -1; supply 0, 1, or 2 to make pressing Escape equivalent to clicking the relevant button. If \a parent is 0, the message box is an \l{Qt::ApplicationModal} {application modal} dialog box. If \a parent is a widget, the message box is \l{Qt::WindowModal} {window modal} relative to \a parent. \warning Do not delete \a parent during the execution of the dialog. If you want to do this, you should create the dialog yourself using one of the QMessageBox constructors. \sa information(), question(), warning() */ int QMessageBox::critical(QWidget *parent, const QString &title, const QString& text, const QString& button0Text, const QString& button1Text, const QString& button2Text, int defaultButtonNumber, int escapeButtonNumber) { return QMessageBoxPrivate::showOldMessageBox(parent, Critical, title, text, button0Text, button1Text, button2Text, defaultButtonNumber, escapeButtonNumber); } /*! \obsolete Returns the text of the message box button \a button, or an empty string if the message box does not contain the button. Use button() and QPushButton::text() instead. */ QString QMessageBox::buttonText(int button) const { Q_D(const QMessageBox); if (QAbstractButton *abstractButton = d->abstractButtonForId(button)) { return abstractButton->text(); } else if (d->buttonBox->buttons().isEmpty() && (button == Ok || button == Old_Ok)) { // for compatibility with Qt 4.0/4.1 return QDialogButtonBox::tr("OK"); } return QString(); } /*! \obsolete Sets the text of the message box button \a button to \a text. Setting the text of a button that is not in the message box is silently ignored. Use addButton() instead. */ void QMessageBox::setButtonText(int button, const QString &text) { Q_D(QMessageBox); if (QAbstractButton *abstractButton = d->abstractButtonForId(button)) { abstractButton->setText(text); } else if (d->buttonBox->buttons().isEmpty() && (button == Ok || button == Old_Ok)) { // for compatibility with Qt 4.0/4.1 addButton(QMessageBox::Ok)->setText(text); } } #ifndef QT_NO_TEXTEDIT /*! \property QMessageBox::detailedText \brief the text to be displayed in the details area. \since 4.2 The text will be interpreted as a plain text. By default, this property contains an empty string. \sa QMessageBox::text, QMessageBox::informativeText */ QString QMessageBox::detailedText() const { Q_D(const QMessageBox); return d->detailsText ? d->detailsText->text() : QString(); } void QMessageBox::setDetailedText(const QString &text) { Q_D(QMessageBox); if (text.isEmpty()) { delete d->detailsText; d->detailsText = 0; removeButton(d->detailsButton); delete d->detailsButton; d->detailsButton = 0; return; } if (!d->detailsText) { d->detailsText = new QMessageBoxDetailsText(this); QGridLayout* grid = qobject_cast(layout()); if (grid) grid->addWidget(d->detailsText, grid->rowCount(), 0, 1, grid->columnCount()); d->detailsText->hide(); } if (!d->detailsButton) { d->detailsButton = new QPushButton(d->detailsText->label(ShowLabel), this); QPushButton hideDetails(d->detailsText->label(HideLabel)); d->detailsButton->setFixedSize(d->detailsButton->sizeHint().expandedTo(hideDetails.sizeHint())); } d->detailsText->setText(text); } #endif // QT_NO_TEXTEDIT /*! \property QMessageBox::informativeText \brief the informative text that provides a fuller description for the message \since 4.2 Infromative text can be used to expand upon the text() to give more information to the user. On the Mac, this text appears in small system font below the text(). On other platforms, it is simply appended to the existing text. By default, this property contains an empty string. \sa QMessageBox::text, QMessageBox::detailedText */ QString QMessageBox::informativeText() const { Q_D(const QMessageBox); return d->informativeLabel ? d->informativeLabel->text() : QString(); } void QMessageBox::setInformativeText(const QString &text) { Q_D(QMessageBox); if (text.isEmpty()) { layout()->removeWidget(d->informativeLabel); delete d->informativeLabel; d->informativeLabel = 0; #ifndef Q_WS_MAC d->label->setContentsMargins(2, 0, 0, 0); #endif d->updateSize(); return; } if (!d->informativeLabel) { QLabel *label = new QLabel; label->setObjectName(QLatin1String("qt_msgbox_informativelabel")); label->setTextInteractionFlags(Qt::TextInteractionFlags(style()->styleHint(QStyle::SH_MessageBox_TextInteractionFlags, 0, this))); label->setAlignment(Qt::AlignTop | Qt::AlignLeft); label->setOpenExternalLinks(true); label->setWordWrap(true); #ifndef Q_WS_MAC d->label->setContentsMargins(2, 0, 0, 0); label->setContentsMargins(2, 0, 0, 6); label->setIndent(9); #else label->setContentsMargins(16, 0, 0, 0); // apply a smaller font the information label on the mac label->setFont(qt_app_fonts_hash()->value("QTipLabel")); #endif label->setWordWrap(true); QGridLayout *grid = static_cast(layout()); grid->addWidget(label, 1, 1, 1, 1); d->informativeLabel = label; } d->informativeLabel->setText(text); d->updateSize(); } /*! \since 4.2 This function shadows QWidget::setWindowTitle(). Sets the title of the message box to \a title. On Mac OS X, the window title is ignored (as required by the Mac OS X Guidelines). */ void QMessageBox::setWindowTitle(const QString &title) { // Message boxes on the mac do not have a title #ifndef Q_WS_MAC QDialog::setWindowTitle(title); #else Q_UNUSED(title); #endif } /*! \since 4.2 This function shadows QWidget::setWindowModality(). Sets the modality of the message box to \a windowModality. On Mac OS X, if the modality is set to Qt::WindowModal and the message box has a parent, then the message box will be a Qt::Sheet, otherwise the message box will be a standard dialog. */ void QMessageBox::setWindowModality(Qt::WindowModality windowModality) { QDialog::setWindowModality(windowModality); if (parentWidget() && windowModality == Qt::WindowModal) setParent(parentWidget(), Qt::Sheet); else setParent(parentWidget(), Qt::Dialog); setDefaultButton(d_func()->defaultButton); } #ifdef QT3_SUPPORT /*! \compat Constructs a message box with the given \a parent, \a name, and window flags, \a f. The window title is specified by \a title, and the message box displays message text and an icon specified by \a text and \a icon. The buttons that the user can access to respond to the message are defined by \a button0, \a button1, and \a button2. */ QMessageBox::QMessageBox(const QString& title, const QString &text, Icon icon, int button0, int button1, int button2, QWidget *parent, const char *name, bool modal, Qt::WindowFlags f) : QDialog(*new QMessageBoxPrivate, parent, f | Qt::WStyle_Customize | Qt::WStyle_DialogBorder | Qt::WStyle_Title | Qt::WStyle_SysMenu | Qt::WindowCloseButtonHint) { Q_D(QMessageBox); setObjectName(QString::fromAscii(name)); d->init(title, text); d->addOldButtons(button0, button1, button2); setModal(modal); setIcon(icon); } /*! \compat Constructs a message box with the given \a parent and \a name. */ QMessageBox::QMessageBox(QWidget *parent, const char *name) : QDialog(*new QMessageBoxPrivate, parent, Qt::WStyle_Customize | Qt::WStyle_DialogBorder | Qt::WStyle_Title | Qt::WStyle_SysMenu | Qt::WindowCloseButtonHint) { Q_D(QMessageBox); setObjectName(QString::fromAscii(name)); d->init(); } /*! Returns the pixmap used for a standard icon. This allows the pixmaps to be used in more complex message boxes. \a icon specifies the required icon, e.g. QMessageBox::Information, QMessageBox::Warning or QMessageBox::Critical. \a style is unused. */ QPixmap QMessageBox::standardIcon(Icon icon, Qt::GUIStyle style) { Q_UNUSED(style); return QMessageBox::standardIcon(icon); } /*! \fn int QMessageBox::message(const QString &title, const QString &text, const QString &buttonText, QWidget *parent = 0, const char *name = 0) Opens a modal message box with the given \a title and showing the given \a text. The message box has a single button which has the given \a buttonText (or tr("OK")). The message box is centred over its \a parent and is called \a name. Use information(), warning(), question(), or critical() instead. \oldcode QMessageBox::message(tr("My App"), tr("All occurrences replaced."), tr("Close"), this); \newcode QMessageBox::information(this, tr("My App"), tr("All occurrences replaced."), QMessageBox::Close); \endcode */ /*! \fn bool QMessageBox::query(const QString &caption, const QString& text, const QString& yesButtonText, const QString& noButtonText, QWidget *parent, const char *name) \obsolete Queries the user using a modal message box with up to two buttons. The message box has the given \a caption (although some window managers don't show it), and shows the given \a text. The left button has the \a yesButtonText (or tr("OK")), and the right button has the \a noButtonText (or isn't shown). The message box is centred over its \a parent and is called \a name. Use information(), question(), warning(), or critical() instead. */ #endif QPixmap QMessageBoxPrivate::standardIcon(QMessageBox::Icon icon, QMessageBox *mb) { QStyle *style = mb ? mb->style() : QApplication::style(); int iconSize = style->pixelMetric(QStyle::PM_MessageBoxIconSize, 0, mb); QIcon tmpIcon; switch (icon) { case QMessageBox::Information: tmpIcon = style->standardIcon(QStyle::SP_MessageBoxInformation, 0, mb); break; case QMessageBox::Warning: tmpIcon = style->standardIcon(QStyle::SP_MessageBoxWarning, 0, mb); break; case QMessageBox::Critical: tmpIcon = style->standardIcon(QStyle::SP_MessageBoxCritical, 0, mb); break; case QMessageBox::Question: tmpIcon = style->standardIcon(QStyle::SP_MessageBoxQuestion, 0, mb); default: break; } if (!tmpIcon.isNull()) return tmpIcon.pixmap(iconSize, iconSize); return QPixmap(); } /*! \obsolete Returns the pixmap used for a standard icon. This allows the pixmaps to be used in more complex message boxes. \a icon specifies the required icon, e.g. QMessageBox::Question, QMessageBox::Information, QMessageBox::Warning or QMessageBox::Critical. Call QStyle::standardIcon() with QStyle::SP_MessageBoxInformation etc. instead. */ QPixmap QMessageBox::standardIcon(Icon icon) { return QMessageBoxPrivate::standardIcon(icon, 0); } /*! \typedef QMessageBox::Button \obsolete Use QMessageBox::StandardButton instead. */ /*! \fn int QMessageBox::information(QWidget *parent, const QString &title, const QString& text, StandardButton button0, StandardButton button1) \fn int QMessageBox::warning(QWidget *parent, const QString &title, const QString& text, StandardButton button0, StandardButton button1) \fn int QMessageBox::critical(QWidget *parent, const QString &title, const QString& text, StandardButton button0, StandardButton button1) \fn int QMessageBox::question(QWidget *parent, const QString &title, const QString& text, StandardButton button0, StandardButton button1) \internal ### Needed for Qt 4 source compatibility */ /*! \fn int QMessageBox::exec() Shows the message box as a \l{QDialog#Modal Dialogs}{modal dialog}, blocking until the user closes it. When using a QMessageBox with standard buttons, this functions returns a \l StandardButton value indicating the standard button that was clicked. When using QMessageBox with custom buttons, this function returns an opaque value; use clickedButton() to determine which button was clicked. Users cannot interact with any other window in the same application until they close the dialog, either by clicking a button or by using a mechanism provided by the window system. \sa show(), result() */ QT_END_NAMESPACE #include "moc_qmessagebox.cpp" #endif // QT_NO_MESSAGEBOX