/**************************************************************************** ** ** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies). ** All rights reserved. ** Contact: Nokia Corporation (qt-info@nokia.com) ** ** This file is part of the QtGui module of the Qt Toolkit. ** ** $QT_BEGIN_LICENSE:LGPL$ ** GNU Lesser General Public License Usage ** This file may be used under the terms of the GNU Lesser General Public ** License version 2.1 as published by the Free Software Foundation and ** appearing in the file LICENSE.LGPL included in the packaging of this ** file. Please review the following information to ensure the GNU Lesser ** General Public License version 2.1 requirements will be met: ** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. ** ** In addition, as a special exception, Nokia gives you certain additional ** rights. These rights are described in the Nokia Qt LGPL Exception ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package. ** ** GNU General Public License Usage ** Alternatively, this file may be used under the terms of the GNU General ** Public License version 3.0 as published by the Free Software Foundation ** and appearing in the file LICENSE.GPL included in the packaging of this ** file. Please review the following information to ensure the GNU General ** Public License version 3.0 requirements will be met: ** http://www.gnu.org/copyleft/gpl.html. ** ** Other Usage ** Alternatively, this file may be used in accordance with the terms and ** conditions contained in a signed written agreement between you and Nokia. ** ** ** ** ** ** $QT_END_LICENSE$ ** ****************************************************************************/ #ifndef QT_NO_IM #include "qcoefepinputcontext_p.h" #include #include #include #include #include #include #include #include #include #include #include #include #include // You only find these enumerations on SDK 5 onwards, so we need to provide our own // to remain compatible with older releases. They won't be called by pre-5.0 SDKs. // MAknEdStateObserver::EAknCursorPositionChanged #define QT_EAknCursorPositionChanged MAknEdStateObserver::EAknEdwinStateEvent(6) // MAknEdStateObserver::EAknActivatePenInputRequest #define QT_EAknActivatePenInputRequest MAknEdStateObserver::EAknEdwinStateEvent(7) // MAknEdStateObserver::EAknClosePenInputRequest #define QT_EAknClosePenInputRequest MAknEdStateObserver::EAknEdwinStateEvent(10) // EAknEditorFlagSelectionVisible is only valid from 3.2 onwards. // Sym^3 AVKON FEP manager expects that this flag is used for FEP-aware editors // that support text selection. #define QT_EAknEditorFlagSelectionVisible 0x100000 // EAknEditorFlagEnablePartialScreen is only valid from Sym^3 onwards. #define QT_EAknEditorFlagEnablePartialScreen 0x200000 // Properties to detect VKB status from AknFepInternalPSKeys.h #define QT_EPSUidAknFep 0x100056de #define QT_EAknFepTouchInputActive 0x00000004 QT_BEGIN_NAMESPACE Q_GUI_EXPORT void qt_s60_setPartialScreenInputMode(bool enable) { S60->partial_keyboard = enable; QApplication::setAttribute(Qt::AA_S60DisablePartialScreenInputMode, !S60->partial_keyboard); QInputContext *ic = 0; if (QApplication::focusWidget()) { ic = QApplication::focusWidget()->inputContext(); } else if (qApp && qApp->inputContext()) { ic = qApp->inputContext(); } if (ic) ic->update(); } Q_GUI_EXPORT void qt_s60_setPartialScreenAutomaticTranslation(bool enable) { S60->partial_keyboardAutoTranslation = enable; } QCoeFepInputContext::QCoeFepInputContext(QObject *parent) : QInputContext(parent), m_fepState(q_check_ptr(new CAknEdwinState)), // CBase derived object needs check on new m_lastImHints(Qt::ImhNone), m_textCapabilities(TCoeInputCapabilities::EAllText), m_inDestruction(false), m_pendingInputCapabilitiesChanged(false), m_pendingTransactionCancel(false), m_cursorVisibility(1), m_inlinePosition(0), m_formatRetriever(0), m_pointerHandler(0), m_hasTempPreeditString(false), m_splitViewResizeBy(0), m_splitViewPreviousWindowStates(Qt::WindowNoState) { m_fepState->SetObjectProvider(this); int defaultFlags = EAknEditorFlagDefault; if (QSysInfo::s60Version() > QSysInfo::SV_S60_5_0) { if (isPartialKeyboardSupported()) { defaultFlags |= QT_EAknEditorFlagEnablePartialScreen; } defaultFlags |= QT_EAknEditorFlagSelectionVisible; } m_fepState->SetFlags(defaultFlags); m_fepState->SetDefaultInputMode( EAknEditorTextInputMode ); m_fepState->SetPermittedInputModes( EAknEditorAllInputModes ); m_fepState->SetDefaultCase( EAknEditorTextCase ); m_fepState->SetPermittedCases( EAknEditorAllCaseModes ); m_fepState->SetSpecialCharacterTableResourceId(R_AVKON_SPECIAL_CHARACTER_TABLE_DIALOG); m_fepState->SetNumericKeymap(EAknEditorAlphanumericNumberModeKeymap); } QCoeFepInputContext::~QCoeFepInputContext() { m_inDestruction = true; // This is to make sure that the FEP manager "forgets" about us, // otherwise we may get callbacks even after we're destroyed. // The call below is essentially equivalent to InputCapabilitiesChanged(), // but is synchronous, rather than asynchronous. CCoeEnv::Static()->SyncNotifyFocusObserversOfChangeInFocus(); if (m_fepState) delete m_fepState; } void QCoeFepInputContext::reset() { Qt::InputMethodHints currentHints = Qt::ImhNone; if (focusWidget()) { QWidget *proxy = focusWidget()->focusProxy(); currentHints = proxy ? proxy->inputMethodHints() : focusWidget()->inputMethodHints(); } // Store a copy of preedit text, if prediction is active and input context is reseted. // This is to ensure that we can replace preedit string after losing focus to FEP manager's // internal sub-windows. if (m_cachedPreeditString.isEmpty() && !(currentHints & Qt::ImhNoPredictiveText)) m_cachedPreeditString = m_preeditString; commitCurrentString(true); } void QCoeFepInputContext::ReportAknEdStateEvent(MAknEdStateObserver::EAknEdwinStateEvent aEventType) { QT_TRAP_THROWING(m_fepState->ReportAknEdStateEventL(aEventType)); } void QCoeFepInputContext::update() { updateHints(false); // For pre-5.0 SDKs, we don't do text updates on S60 side. if (QSysInfo::s60Version() < QSysInfo::SV_S60_5_0) { return; } // Don't be fooled (as I was) by the name of this enumeration. // What it really does is tell the virtual keyboard UI that the text has been // updated and it should be reflected in the internal display of the VK. ReportAknEdStateEvent(QT_EAknCursorPositionChanged); } void QCoeFepInputContext::setFocusWidget(QWidget *w) { commitCurrentString(true); QInputContext::setFocusWidget(w); updateHints(true); } void QCoeFepInputContext::widgetDestroyed(QWidget *w) { m_cachedPreeditString.clear(); // Make sure that the input capabilities of whatever new widget got focused are queried. CCoeControl *ctrl = w->effectiveWinId(); if (ctrl->IsFocused()) { queueInputCapabilitiesChanged(); } } QString QCoeFepInputContext::language() { TLanguage lang = m_fepState->LocalLanguage(); const QByteArray localeName = qt_symbianLocaleName(lang); if (!localeName.isEmpty()) { return QString::fromLatin1(localeName); } else { return QString::fromLatin1("C"); } } bool QCoeFepInputContext::needsInputPanel() { switch (QSysInfo::s60Version()) { case QSysInfo::SV_S60_3_1: case QSysInfo::SV_S60_3_2: // There are no touch phones for pre-5.0 SDKs. return false; #ifdef Q_CC_NOKIAX86 default: // For emulator we assume that we need an input panel, since we can't // separate between phone types. return true; #else case QSysInfo::SV_S60_5_0: { // For SDK == 5.0, we need phone specific detection, since the HAL API // is no good on most phones. However, all phones at the time of writing use the // input panel, except N97 in landscape mode, but in this mode it refuses to bring // up the panel anyway, so we don't have to care. return true; } default: // For unknown/newer types, we try to use the HAL API. int keyboardEnabled; int keyboardType; int err[2]; err[0] = HAL::Get(HAL::EKeyboard, keyboardType); err[1] = HAL::Get(HAL::EKeyboardState, keyboardEnabled); if (err[0] == KErrNone && err[1] == KErrNone && keyboardType != 0 && keyboardEnabled) // Means that we have some sort of keyboard. return false; // Fall back to using the input panel. return true; #endif // !Q_CC_NOKIAX86 } } bool QCoeFepInputContext::filterEvent(const QEvent *event) { if (!focusWidget()) return false; switch (event->type()) { case QEvent::KeyPress: commitTemporaryPreeditString(); // fall through intended case QEvent::KeyRelease: const QKeyEvent *keyEvent = static_cast(event); //If proxy exists, always use hints from proxy. QWidget *proxy = focusWidget()->focusProxy(); Qt::InputMethodHints currentHints = proxy ? proxy->inputMethodHints() : focusWidget()->inputMethodHints(); switch (keyEvent->key()) { case Qt::Key_F20: Q_ASSERT(m_lastImHints == currentHints); if (m_lastImHints & Qt::ImhHiddenText) { // Special case in Symbian. On editors with secret text, F20 is for some reason // considered to be a backspace. QKeyEvent modifiedEvent(keyEvent->type(), Qt::Key_Backspace, keyEvent->modifiers(), keyEvent->text(), keyEvent->isAutoRepeat(), keyEvent->count()); QApplication::sendEvent(focusWidget(), &modifiedEvent); return true; } break; case Qt::Key_Select: if (!m_preeditString.isEmpty()) { commitCurrentString(true); return true; } break; default: break; } QString widgetText = focusWidget()->inputMethodQuery(Qt::ImSurroundingText).toString(); bool validLength; int maxLength = focusWidget()->inputMethodQuery(Qt::ImMaximumTextLength).toInt(&validLength); if (!keyEvent->text().isEmpty() && validLength && widgetText.size() + m_preeditString.size() >= maxLength) { // Don't send key events with string content if the widget is "full". return true; } if (keyEvent->type() == QEvent::KeyPress && currentHints & Qt::ImhHiddenText && !keyEvent->text().isEmpty()) { // Send some temporary preedit text in order to make text visible for a moment. m_preeditString = keyEvent->text(); QList attributes; QInputMethodEvent imEvent(m_preeditString, attributes); sendEvent(imEvent); m_tempPreeditStringTimeout.start(1000, this); m_hasTempPreeditString = true; update(); return true; } break; } if (!needsInputPanel()) return false; if ((event->type() == QEvent::CloseSoftwareInputPanel) && (QSysInfo::s60Version() > QSysInfo::SV_S60_5_0)) { m_fepState->ReportAknEdStateEventL(QT_EAknClosePenInputRequest); return false; } if (event->type() == QEvent::RequestSoftwareInputPanel) { // Only request virtual keyboard if it is not yet active or if this is the first time // panel is requested for this application. static bool firstTime = true; int vkbActive = 0; if (firstTime) { // Sometimes the global QT_EAknFepTouchInputActive value can be left incorrect at // application exit if the application is exited when input panel is active. // Therefore we always want to open the panel the first time application requests it. firstTime = false; } else { const TUid KPSUidAknFep = {QT_EPSUidAknFep}; // No need to check for return value, as vkbActive stays zero in that case RProperty::Get(KPSUidAknFep, QT_EAknFepTouchInputActive, vkbActive); } if (!vkbActive) { // Notify S60 that we want the virtual keyboard to show up. QSymbianControl *sControl; sControl = focusWidget()->effectiveWinId()->MopGetObject(sControl); Q_ASSERT(sControl); // The FEP UI temporarily steals focus when it shows up the first time, causing // all sorts of weird effects on the focused widgets. Since it will immediately give // back focus to us, we temporarily disable focus handling until the job's done. if (sControl) { sControl->setIgnoreFocusChanged(true); } ensureInputCapabilitiesChanged(); m_fepState->ReportAknEdStateEventL(MAknEdStateObserver::QT_EAknActivatePenInputRequest); if (sControl) { sControl->setIgnoreFocusChanged(false); } } } return false; } bool QCoeFepInputContext::symbianFilterEvent(QWidget *keyWidget, const QSymbianEvent *event) { Q_UNUSED(keyWidget); if (event->type() == QSymbianEvent::CommandEvent) // A command basically means the same as a button being pushed. With Qt buttons // that would normally result in a reset of the input method due to the focus change. // This should also happen for commands. reset(); if (event->type() == QSymbianEvent::WindowServerEvent && event->windowServerEvent() && event->windowServerEvent()->Type() == EEventWindowVisibilityChanged && S60->splitViewLastWidget) { QGraphicsView *gv = qobject_cast(S60->splitViewLastWidget); const bool alwaysResize = (gv && gv->verticalScrollBarPolicy() != Qt::ScrollBarAlwaysOff); if (alwaysResize) { TUint visibleFlags = event->windowServerEvent()->VisibilityChanged()->iFlags; if (visibleFlags & TWsVisibilityChangedEvent::EPartiallyVisible) ensureFocusWidgetVisible(S60->splitViewLastWidget); if (visibleFlags & TWsVisibilityChangedEvent::ENotVisible) resetSplitViewWidget(true); } } if (event->type() == QSymbianEvent::ResourceChangeEvent && (event->resourceChangeType() == KEikMessageFadeAllWindows || event->resourceChangeType() == KEikDynamicLayoutVariantSwitch)) { reset(); } return false; } void QCoeFepInputContext::timerEvent(QTimerEvent *timerEvent) { if (timerEvent->timerId() == m_tempPreeditStringTimeout.timerId()) commitTemporaryPreeditString(); } void QCoeFepInputContext::commitTemporaryPreeditString() { if (m_tempPreeditStringTimeout.isActive()) m_tempPreeditStringTimeout.stop(); if (!m_hasTempPreeditString) return; commitCurrentString(false); } void QCoeFepInputContext::mouseHandler(int x, QMouseEvent *event) { Q_ASSERT(focusWidget()); if (event->type() == QEvent::MouseButtonPress && event->button() == Qt::LeftButton) { QWidget *proxy = focusWidget()->focusProxy(); Qt::InputMethodHints currentHints = proxy ? proxy->inputMethodHints() : focusWidget()->inputMethodHints(); //If splitview is open and T9 word is tapped, pass the pointer event to pointer handler. //This will open the "suggested words" list. Pass pointer position always as zero, to make //full word replacement in case user makes a selection. if (isPartialKeyboardSupported() && S60->partialKeyboardOpen && m_pointerHandler && !(currentHints & Qt::ImhNoPredictiveText) && (x > 0 && x < m_preeditString.length())) { m_pointerHandler->HandlePointerEventInInlineTextL(TPointerEvent::EButton1Up, 0, 0); } else { commitCurrentString(true); int pos = focusWidget()->inputMethodQuery(Qt::ImCursorPosition).toInt(); QList attributes; attributes << QInputMethodEvent::Attribute(QInputMethodEvent::Selection, pos + x, 0, QVariant()); QInputMethodEvent event(QLatin1String(""), attributes); sendEvent(event); } } } TCoeInputCapabilities QCoeFepInputContext::inputCapabilities() { if (m_inDestruction || !focusWidget()) { return TCoeInputCapabilities(TCoeInputCapabilities::ENone, 0, 0); } return TCoeInputCapabilities(m_textCapabilities, this, 0); } void QCoeFepInputContext::resetSplitViewWidget(bool keepInputWidget) { QGraphicsView *gv = qobject_cast(S60->splitViewLastWidget); if (!gv) { return; } QSymbianControl *symControl = static_cast(gv->effectiveWinId()); symControl->CancelLongTapTimer(); const bool alwaysResize = (gv->verticalScrollBarPolicy() != Qt::ScrollBarAlwaysOff); QWidget *windowToMove = gv->window(); bool userResize = gv->testAttribute(Qt::WA_Resized); windowToMove->setUpdatesEnabled(false); if (!alwaysResize) { if (gv->scene()) { if (gv->scene()->focusItem() && S60->partial_keyboardAutoTranslation) { // Check if the widget contains cursorPositionChanged signal and disconnect from it. QByteArray signal = QMetaObject::normalizedSignature(SIGNAL(cursorPositionChanged())); int index = gv->scene()->focusItem()->toGraphicsObject()->metaObject()->indexOfSignal(signal.right(signal.length() - 1)); if (index != -1) disconnect(gv->scene()->focusItem()->toGraphicsObject(), SIGNAL(cursorPositionChanged()), this, SLOT(translateInputWidget())); } QGraphicsItem *rootItem = 0; foreach (QGraphicsItem *item, gv->scene()->items()) { if (!item->parentItem()) { rootItem = item; break; } } if (rootItem) rootItem->resetTransform(); } } else { if (m_splitViewResizeBy) if (m_splitViewPreviousWindowStates & Qt::WindowFullScreen) gv->resize(gv->rect().width(), qApp->desktop()->height()); else gv->resize(gv->rect().width(), m_splitViewResizeBy); } // Resizing might have led to widget losing its original windowstate. // Restore previous window state. if (m_splitViewPreviousWindowStates != windowToMove->windowState()) windowToMove->setWindowState(m_splitViewPreviousWindowStates); windowToMove->setUpdatesEnabled(true); gv->setAttribute(Qt::WA_Resized, userResize); //not a user resize m_splitViewResizeBy = 0; if (!keepInputWidget) { m_splitViewPreviousWindowStates = Qt::WindowNoState; S60->splitViewLastWidget = 0; } } // Checks if a given widget is visible in the splitview rect. The offset // parameter can be used to validate if moving widget upwards or downwards // by the offset would make a difference for the visibility. bool QCoeFepInputContext::isWidgetVisible(QWidget *widget, int offset) { bool visible = false; if (widget) { QRect splitViewRect = qt_TRect2QRect(static_cast(S60->appUi())->ClientRect()); QWidget *window = QApplication::activeWindow(); QGraphicsView *gv = qobject_cast(widget); if (gv && window) { if (QGraphicsScene *scene = gv->scene()) { if (QGraphicsItem *focusItem = scene->focusItem()) { QPoint cursorPos = window->mapToGlobal(focusItem->cursor().pos()); cursorPos.setY(cursorPos.y() + offset); if (splitViewRect.contains(cursorPos)) { visible = true; } } } } } return visible; } bool QCoeFepInputContext::isPartialKeyboardSupported() { return (S60->partial_keyboard || !QApplication::testAttribute(Qt::AA_S60DisablePartialScreenInputMode)); } // Ensure that the input widget is visible in the splitview rect. void QCoeFepInputContext::ensureFocusWidgetVisible(QWidget *widget) { // Native side opening and closing its virtual keyboard when it changes the keyboard layout, // has an adverse impact on long tap timer. Cancel the timer when splitview opens to avoid this. QSymbianControl *symControl = static_cast(widget->effectiveWinId()); symControl->CancelLongTapTimer(); // Graphicsviews that have vertical scrollbars should always be resized to the splitview area. // Graphicsviews without scrollbars should be translated. QGraphicsView *gv = qobject_cast(widget); if (!gv) return; const bool alwaysResize = (gv && gv->verticalScrollBarPolicy() != Qt::ScrollBarAlwaysOff); const bool moveWithinVisibleArea = (S60->splitViewLastWidget != 0); QWidget *windowToMove = gv ? gv : symControl->widget(); if (!windowToMove->isWindow()) windowToMove = windowToMove->window(); if (!windowToMove) { return; } // When opening the keyboard (not moving within the splitview area), save the original // window state. In some cases, ensuring input widget visibility might lead to window // states getting changed. if (!moveWithinVisibleArea) { // Check if the widget contains cursorPositionChanged signal and connect to it. QByteArray signal = QMetaObject::normalizedSignature(SIGNAL(cursorPositionChanged())); if (gv->scene() && gv->scene()->focusItem() && S60->partial_keyboardAutoTranslation) { int index = gv->scene()->focusItem()->toGraphicsObject()->metaObject()->indexOfSignal(signal.right(signal.length() - 1)); if (index != -1) connect(gv->scene()->focusItem()->toGraphicsObject(), SIGNAL(cursorPositionChanged()), this, SLOT(translateInputWidget())); } S60->splitViewLastWidget = widget; m_splitViewPreviousWindowStates = windowToMove->windowState(); } int windowTop = widget->window()->pos().y(); const bool userResize = widget->testAttribute(Qt::WA_Resized); QRect splitViewRect = qt_TRect2QRect(static_cast(S60->appUi())->ClientRect()); // When resizing a window widget, it will lose its maximized window state. // Native applications hide statuspane in splitview state, so lets move to // fullscreen mode. This makes available area slightly bigger, which helps usability // and greatly reduces event passing in orientation switch cases, // as the statuspane size is not changing. if (alwaysResize) windowToMove->setUpdatesEnabled(false); if (!(windowToMove->windowState() & Qt::WindowFullScreen)) { windowToMove->setWindowState( (windowToMove->windowState() & ~(Qt::WindowMinimized | Qt::WindowFullScreen)) | Qt::WindowFullScreen); } if (alwaysResize) { if (!moveWithinVisibleArea) { m_splitViewResizeBy = widget->height(); windowTop = widget->geometry().top(); widget->resize(widget->width(), splitViewRect.height() - windowTop); } if (gv->scene() && S60->partial_keyboardAutoTranslation) { const QRectF microFocusRect = gv->scene()->inputMethodQuery(Qt::ImMicroFocus).toRectF(); gv->ensureVisible(microFocusRect); } } else { if (S60->partial_keyboardAutoTranslation) translateInputWidget(); } if (alwaysResize) windowToMove->setUpdatesEnabled(true); widget->setAttribute(Qt::WA_Resized, userResize); //not a user resize } static QTextCharFormat qt_TCharFormat2QTextCharFormat(const TCharFormat &cFormat, bool validStyleColor) { QTextCharFormat qFormat; if (validStyleColor) { QBrush foreground(QColor(cFormat.iFontPresentation.iTextColor.Internal())); qFormat.setForeground(foreground); } qFormat.setFontStrikeOut(cFormat.iFontPresentation.iStrikethrough == EStrikethroughOn); qFormat.setFontUnderline(cFormat.iFontPresentation.iUnderline == EUnderlineOn); return qFormat; } void QCoeFepInputContext::updateHints(bool mustUpdateInputCapabilities) { QWidget *w = focusWidget(); if (w) { QWidget *proxy = w->focusProxy(); Qt::InputMethodHints hints = proxy ? proxy->inputMethodHints() : w->inputMethodHints(); // Since splitview support works like an input method hint, yet it is private flag, // we need to update its state separately. if (QSysInfo::s60Version() > QSysInfo::SV_S60_5_0) { TInt currentFlags = m_fepState->Flags(); if (isPartialKeyboardSupported()) currentFlags |= QT_EAknEditorFlagEnablePartialScreen; else currentFlags &= ~QT_EAknEditorFlagEnablePartialScreen; if (currentFlags != m_fepState->Flags()) m_fepState->SetFlags(currentFlags); } if (hints != m_lastImHints) { m_lastImHints = hints; applyHints(hints); } else if (!mustUpdateInputCapabilities) { // Optimization. Return immediately if there was no change. return; } } queueInputCapabilitiesChanged(); } void QCoeFepInputContext::applyHints(Qt::InputMethodHints hints) { using namespace Qt; reset(); commitTemporaryPreeditString(); const bool anynumbermodes = hints & (ImhDigitsOnly | ImhFormattedNumbersOnly | ImhDialableCharactersOnly); const bool anytextmodes = hints & (ImhUppercaseOnly | ImhLowercaseOnly | ImhEmailCharactersOnly | ImhUrlCharactersOnly); const bool numbersOnly = anynumbermodes && !anytextmodes; const bool noOnlys = !(hints & ImhExclusiveInputMask); // if alphanumeric input, or if multiple incompatible number modes are selected; // then make all symbols available in numeric mode too. const bool needsCharMap= !numbersOnly || ((hints & ImhFormattedNumbersOnly) && (hints & ImhDialableCharactersOnly)); TInt flags; Qt::InputMethodHints oldHints = hints; // Some sanity checking. Make sure that only one preference is set. InputMethodHints prefs = ImhPreferNumbers | ImhPreferUppercase | ImhPreferLowercase; prefs &= hints; if (prefs != ImhPreferNumbers && prefs != ImhPreferUppercase && prefs != ImhPreferLowercase) { hints &= ~prefs; } if (!noOnlys) { // Make sure that the preference is within the permitted set. if (hints & ImhPreferNumbers && !anynumbermodes) { hints &= ~ImhPreferNumbers; } else if (hints & ImhPreferUppercase && !(hints & ImhUppercaseOnly)) { hints &= ~ImhPreferUppercase; } else if (hints & ImhPreferLowercase && !(hints & ImhLowercaseOnly)) { hints &= ~ImhPreferLowercase; } // If there is no preference, set it to something within the permitted set. if (!(hints & ImhPreferNumbers || hints & ImhPreferUppercase || hints & ImhPreferLowercase)) { if (hints & ImhLowercaseOnly) { hints |= ImhPreferLowercase; } else if (hints & ImhUppercaseOnly) { hints |= ImhPreferUppercase; } else if (numbersOnly) { hints |= ImhPreferNumbers; } } } if (hints & ImhPreferNumbers) { m_fepState->SetDefaultInputMode(EAknEditorNumericInputMode); m_fepState->SetCurrentInputMode(EAknEditorNumericInputMode); } else { m_fepState->SetDefaultInputMode(EAknEditorTextInputMode); m_fepState->SetCurrentInputMode(EAknEditorTextInputMode); } flags = 0; if (noOnlys || (anynumbermodes && anytextmodes)) { flags = EAknEditorAllInputModes; } else if (anynumbermodes) { flags |= EAknEditorNumericInputMode; } else if (anytextmodes) { flags |= EAknEditorTextInputMode; } else { flags = EAknEditorAllInputModes; } m_fepState->SetPermittedInputModes(flags); ReportAknEdStateEvent(MAknEdStateObserver::EAknEdwinStateInputModeUpdate); if (hints & ImhPreferLowercase) { m_fepState->SetDefaultCase(EAknEditorLowerCase); m_fepState->SetCurrentCase(EAknEditorLowerCase); } else if (hints & ImhPreferUppercase) { m_fepState->SetDefaultCase(EAknEditorUpperCase); m_fepState->SetCurrentCase(EAknEditorUpperCase); } else if (hints & ImhNoAutoUppercase) { m_fepState->SetDefaultCase(EAknEditorLowerCase); m_fepState->SetCurrentCase(EAknEditorLowerCase); } else { m_fepState->SetDefaultCase(EAknEditorTextCase); m_fepState->SetCurrentCase(EAknEditorTextCase); } flags = 0; if (hints & ImhUppercaseOnly) { flags |= EAknEditorUpperCase; } if (hints & ImhLowercaseOnly) { flags |= EAknEditorLowerCase; } if (flags == 0) { flags = EAknEditorAllCaseModes; if (hints & ImhNoAutoUppercase) { flags &= ~EAknEditorTextCase; } } m_fepState->SetPermittedCases(flags); ReportAknEdStateEvent(MAknEdStateObserver::EAknEdwinStateCaseModeUpdate); flags = 0; if (QSysInfo::s60Version() > QSysInfo::SV_S60_5_0) { if (isPartialKeyboardSupported()) flags |= QT_EAknEditorFlagEnablePartialScreen; flags |= QT_EAknEditorFlagSelectionVisible; } if (hints & ImhUppercaseOnly && !(hints & ImhLowercaseOnly) || hints & ImhLowercaseOnly && !(hints & ImhUppercaseOnly)) { flags |= EAknEditorFlagFixedCase; } // Using T9 and hidden text together may actually crash the FEP, so check for hidden text too. if (hints & ImhNoPredictiveText || hints & ImhHiddenText) { flags |= EAknEditorFlagNoT9; } if (needsCharMap) flags |= EAknEditorFlagUseSCTNumericCharmap; m_fepState->SetFlags(flags); ReportAknEdStateEvent(MAknEdStateObserver::EAknEdwinStateFlagsUpdate); if (hints & ImhDialableCharactersOnly) { // This is first, because if (ImhDialableCharactersOnly | ImhFormattedNumbersOnly) // is specified, this one is more natural (# key enters a #) flags = EAknEditorStandardNumberModeKeymap; } else if (hints & ImhFormattedNumbersOnly) { // # key enters decimal point flags = EAknEditorCalculatorNumberModeKeymap; } else if (hints & ImhDigitsOnly) { // This is last, because it is most restrictive (# key is inactive) flags = EAknEditorPlainNumberModeKeymap; } else { flags = EAknEditorStandardNumberModeKeymap; } m_fepState->SetNumericKeymap(static_cast(flags)); if (hints & ImhUrlCharactersOnly) { // URL characters is everything except space, so a superset of the other restrictions m_fepState->SetSpecialCharacterTableResourceId(R_AVKON_URL_SPECIAL_CHARACTER_TABLE_DIALOG); } else if (hints & ImhEmailCharactersOnly) { m_fepState->SetSpecialCharacterTableResourceId(R_AVKON_EMAIL_ADDR_SPECIAL_CHARACTER_TABLE_DIALOG); } else if (needsCharMap) { m_fepState->SetSpecialCharacterTableResourceId(R_AVKON_SPECIAL_CHARACTER_TABLE_DIALOG); } else { m_fepState->SetSpecialCharacterTableResourceId(0); } if (hints & ImhHiddenText) { m_textCapabilities = TCoeInputCapabilities::EAllText | TCoeInputCapabilities::ESecretText; } else { m_textCapabilities = TCoeInputCapabilities::EAllText; } } void QCoeFepInputContext::applyFormat(QList *attributes) { TCharFormat cFormat; QColor styleTextColor; if (QWidget *focused = focusWidget()) { QGraphicsView *gv = qobject_cast(focused); if (!gv) // could be either the QGV or its viewport that has focus gv = qobject_cast(focused->parentWidget()); if (gv) { if (QGraphicsScene *scene = gv->scene()) { if (QGraphicsItem *focusItem = scene->focusItem()) { if (focusItem->isWidget()) { styleTextColor = static_cast(focusItem)->palette().text().color(); } } } } else { styleTextColor = focused->palette().text().color(); } } else { styleTextColor = QApplication::palette("QLineEdit").text().color(); } if (styleTextColor.isValid()) { const TLogicalRgb fontColor(TRgb(styleTextColor.red(), styleTextColor.green(), styleTextColor.blue(), styleTextColor.alpha())); cFormat.iFontPresentation.iTextColor = fontColor; } TInt numChars = 0; TInt charPos = 0; int oldSize = attributes->size(); while (m_formatRetriever) { m_formatRetriever->GetFormatOfFepInlineText(cFormat, numChars, charPos); if (numChars <= 0) { // This shouldn't happen according to S60 docs, but apparently does sometimes. break; } attributes->append(QInputMethodEvent::Attribute(QInputMethodEvent::TextFormat, charPos, numChars, QVariant(qt_TCharFormat2QTextCharFormat(cFormat, styleTextColor.isValid())))); charPos += numChars; if (charPos >= m_preeditString.size()) { break; } } } void QCoeFepInputContext::queueInputCapabilitiesChanged() { if (m_pendingInputCapabilitiesChanged) return; // Call ensureInputCapabilitiesChanged asynchronously. This is done to improve performance // by not updating input capabilities too often. The reason we don't call the Symbian // asynchronous version of InputCapabilitiesChanged is because we need to ensure that it // is synchronous in some specific cases. Those will call ensureInputCapabilitesChanged. QMetaObject::invokeMethod(this, "ensureInputCapabilitiesChanged", Qt::QueuedConnection); m_pendingInputCapabilitiesChanged = true; } void QCoeFepInputContext::ensureInputCapabilitiesChanged() { if (!m_pendingInputCapabilitiesChanged) return; // The call below is essentially equivalent to InputCapabilitiesChanged(), // but is synchronous, rather than asynchronous. CCoeEnv::Static()->SyncNotifyFocusObserversOfChangeInFocus(); m_pendingInputCapabilitiesChanged = false; } void QCoeFepInputContext::translateInputWidget() { QGraphicsView *gv = qobject_cast(S60->splitViewLastWidget); if (!gv) return; QRect splitViewRect = qt_TRect2QRect(static_cast(S60->appUi())->ClientRect()); QRectF cursor = gv->scene()->inputMethodQuery(Qt::ImMicroFocus).toRectF(); QPolygon cursorP = gv->mapFromScene(cursor); QRectF vkbRect = QRectF(splitViewRect.bottomLeft(), qApp->desktop()->rect().bottomRight()); if (cursor.isEmpty() || vkbRect.isEmpty()) return; // Fetch root item (i.e. graphicsitem with no parent) QGraphicsItem *rootItem = 0; foreach (QGraphicsItem *item, gv->scene()->items()) { if (!item->parentItem()) { rootItem = item; break; } } if (!rootItem) return; m_transformation = (rootItem->transform().isTranslating()) ? QRectF(0,0, gv->width(), rootItem->transform().dy()) : QRectF(); // Adjust cursor bounding rect to be lower, so that view translates if the cursor gets near // the splitview border. QRect cursorRect = cursorP.boundingRect().adjusted(0, cursor.height(), 0, cursor.height()); if (splitViewRect.contains(cursorRect)) return; // New Y position should be ideally just above the keyboard. // If that would expose unpainted canvas, limit the tranformation to the visible scene rect or // to the focus item's shape/clip path. const QPainterPath path = gv->scene()->focusItem()->isClipped() ? gv->scene()->focusItem()->clipPath() : gv->scene()->focusItem()->shape(); const qreal itemHeight = path.boundingRect().height(); // Limit the maximum translation so that underlaying window content is not exposed. qreal maxY = gv->sceneRect().bottom() - splitViewRect.bottom(); maxY = m_transformation.height() ? (qMin(itemHeight, maxY) + m_transformation.height()) : maxY; if (maxY < 0) maxY = 0; // Translation should happen row-by-row, but initially it needs to ensure that cursor is visible. const qreal translation = m_transformation.height() ? cursor.height() : (cursorRect.bottom() - vkbRect.top()); const qreal dy = -(qMin(maxY, translation)); // Do not allow transform above screen top, nor beyond scenerect if (m_transformation.height() + dy > 0 || gv->sceneRect().bottom() + m_transformation.height() < 0) { // If we already have some transformation, remove it. if (m_transformation.height() < 0 || gv->sceneRect().bottom() + m_transformation.height() < 0) { rootItem->resetTransform(); translateInputWidget(); } return; } rootItem->setTransform(QTransform::fromTranslate(0, dy), true); } void QCoeFepInputContext::StartFepInlineEditL(const TDesC& aInitialInlineText, TInt aPositionOfInsertionPointInInlineText, TBool aCursorVisibility, const MFormCustomDraw* /*aCustomDraw*/, MFepInlineTextFormatRetriever& aInlineTextFormatRetriever, MFepPointerEventHandlerDuringInlineEdit& aPointerEventHandlerDuringInlineEdit) { QWidget *w = focusWidget(); if (!w) return; m_cachedPreeditString.clear(); commitTemporaryPreeditString(); QList attributes; m_cursorVisibility = aCursorVisibility ? 1 : 0; m_inlinePosition = aPositionOfInsertionPointInInlineText; m_preeditString = qt_TDesC2QString(aInitialInlineText); m_formatRetriever = &aInlineTextFormatRetriever; m_pointerHandler = &aPointerEventHandlerDuringInlineEdit; // With T9 aInitialInlineText is typically empty when StartFepInlineEditL is called, // but FEP requires that selected text is always removed at StartFepInlineEditL. // Let's remove the selected text if aInitialInlineText is empty and there is selected text if (m_preeditString.isEmpty()) { int anchor = w->inputMethodQuery(Qt::ImAnchorPosition).toInt(); int cursorPos = w->inputMethodQuery(Qt::ImCursorPosition).toInt(); int replacementLength = qAbs(cursorPos-anchor); if (replacementLength > 0) { int replacementStart = cursorPos < anchor ? 0 : -replacementLength; QList clearSelectionAttributes; QInputMethodEvent clearSelectionEvent(QLatin1String(""), clearSelectionAttributes); clearSelectionEvent.setCommitString(QLatin1String(""), replacementStart, replacementLength); sendEvent(clearSelectionEvent); } } applyFormat(&attributes); attributes.append(QInputMethodEvent::Attribute(QInputMethodEvent::Cursor, m_inlinePosition, m_cursorVisibility, QVariant())); QInputMethodEvent event(m_preeditString, attributes); sendEvent(event); } void QCoeFepInputContext::UpdateFepInlineTextL(const TDesC& aNewInlineText, TInt aPositionOfInsertionPointInInlineText) { QWidget *w = focusWidget(); if (!w) return; commitTemporaryPreeditString(); m_inlinePosition = aPositionOfInsertionPointInInlineText; QList attributes; applyFormat(&attributes); attributes.append(QInputMethodEvent::Attribute(QInputMethodEvent::Cursor, m_inlinePosition, m_cursorVisibility, QVariant())); QString newPreeditString = qt_TDesC2QString(aNewInlineText); QInputMethodEvent event(newPreeditString, attributes); if (!m_cachedPreeditString.isEmpty()) { event.setCommitString(QLatin1String(""), -m_cachedPreeditString.length(), m_cachedPreeditString.length()); m_cachedPreeditString.clear(); } else if (newPreeditString.isEmpty() && m_preeditString.isEmpty()) { // In Symbian world this means "erase last character". event.setCommitString(QLatin1String(""), -1, 1); } m_preeditString = newPreeditString; sendEvent(event); } void QCoeFepInputContext::SetInlineEditingCursorVisibilityL(TBool aCursorVisibility) { QWidget *w = focusWidget(); if (!w) return; m_cursorVisibility = aCursorVisibility ? 1 : 0; QList attributes; attributes.append(QInputMethodEvent::Attribute(QInputMethodEvent::Cursor, m_inlinePosition, m_cursorVisibility, QVariant())); QInputMethodEvent event(m_preeditString, attributes); sendEvent(event); } void QCoeFepInputContext::CancelFepInlineEdit() { // We are not supposed to ever have a tempPreeditString and a real preedit string // from S60 at the same time, so it should be safe to rely on this test to determine // whether we should honor S60's request to clear the text or not. if (m_hasTempPreeditString || m_pendingTransactionCancel) return; m_pendingTransactionCancel = true; QList attributes; QInputMethodEvent event(QLatin1String(""), attributes); event.setCommitString(QLatin1String(""), 0, 0); m_preeditString.clear(); m_inlinePosition = 0; sendEvent(event); // Sync with native side editor state. Native side can then do various operations // based on editor state, such as removing 'exact word bubble'. if (!m_pendingInputCapabilitiesChanged) ReportAknEdStateEvent(MAknEdStateObserver::EAknSyncEdwinState); m_pendingTransactionCancel = false; } TInt QCoeFepInputContext::DocumentLengthForFep() const { QWidget *w = focusWidget(); if (!w) return 0; QVariant variant = w->inputMethodQuery(Qt::ImSurroundingText); int size = variant.value().size() + m_preeditString.size(); // To fix an issue with backspaces not being generated if document size is zero, // fake document length to be at least one always, except when dealing with // hidden text widgets, where this faking would generate extra asterisk. Since the // primary use of hidden text widgets is password fields, they are unlikely to // support multiple lines anyway. if (size == 0 && !(m_textCapabilities & TCoeInputCapabilities::ESecretText)) size = 1; return size; } TInt QCoeFepInputContext::DocumentMaximumLengthForFep() const { QWidget *w = focusWidget(); if (!w) return 0; QVariant variant = w->inputMethodQuery(Qt::ImMaximumTextLength); int size; if (variant.isValid()) { size = variant.toInt(); } else { size = INT_MAX; // Sensible default for S60. } return size; } void QCoeFepInputContext::SetCursorSelectionForFepL(const TCursorSelection& aCursorSelection) { QWidget *w = focusWidget(); if (!w) return; commitTemporaryPreeditString(); int pos = aCursorSelection.iAnchorPos; int length = aCursorSelection.iCursorPos - pos; QList attributes; attributes << QInputMethodEvent::Attribute(QInputMethodEvent::Selection, pos, length, QVariant()); QInputMethodEvent event(m_preeditString, attributes); sendEvent(event); } void QCoeFepInputContext::GetCursorSelectionForFep(TCursorSelection& aCursorSelection) const { QWidget *w = focusWidget(); if (!w) { aCursorSelection.SetSelection(0,0); return; } int cursor = w->inputMethodQuery(Qt::ImCursorPosition).toInt() + m_preeditString.size(); int anchor = w->inputMethodQuery(Qt::ImAnchorPosition).toInt() + m_preeditString.size(); QString text = w->inputMethodQuery(Qt::ImSurroundingText).value(); int combinedSize = text.size() + m_preeditString.size(); if (combinedSize < anchor || combinedSize < cursor) { // ### TODO! FIXME! QTBUG-5050 // This is a hack to prevent crashing in 4.6 with QLineEdits that use input masks. // The root problem is that cursor position is relative to displayed text instead of the // actual text we get. // // To properly fix this we would need to know the displayText of QLineEdits instead // of just the text, which on itself should be a trivial change. The difficulties start // when we need to commit the changes back to the QLineEdit, which would have to be somehow // able to handle displayText, too. // // Until properly fixed, the cursor and anchor positions will not reflect correct positions // for masked QLineEdits, unless all the masked positions are filled in order so that // cursor position relative to the displayed text matches position relative to actual text. aCursorSelection.iAnchorPos = combinedSize; aCursorSelection.iCursorPos = combinedSize; } else { aCursorSelection.iAnchorPos = anchor; aCursorSelection.iCursorPos = cursor; } } void QCoeFepInputContext::GetEditorContentForFep(TDes& aEditorContent, TInt aDocumentPosition, TInt aLengthToRetrieve) const { QWidget *w = focusWidget(); if (!w) { aEditorContent.FillZ(aLengthToRetrieve); return; } QString text = w->inputMethodQuery(Qt::ImSurroundingText).value(); // FEP expects the preedit string to be part of the editor content, so let's mix it in. int cursor = w->inputMethodQuery(Qt::ImCursorPosition).toInt(); text.insert(cursor, m_preeditString); // Add additional space to empty non-password text to compensate // for the fake length we specified in DocumentLengthForFep(). if (text.size() == 0 && !(m_textCapabilities & TCoeInputCapabilities::ESecretText)) text += QChar(0x20); aEditorContent.Copy(qt_QString2TPtrC(text.mid(aDocumentPosition, aLengthToRetrieve))); } void QCoeFepInputContext::GetFormatForFep(TCharFormat& aFormat, TInt /* aDocumentPosition */) const { QWidget *w = focusWidget(); if (!w) { aFormat = TCharFormat(); return; } QFont font = w->inputMethodQuery(Qt::ImFont).value(); QFontMetrics metrics(font); //QString name = font.rawName(); QString name = font.defaultFamily(); // TODO! FIXME! Should be the above. QHBufC hBufC(name); aFormat = TCharFormat(hBufC->Des(), metrics.height()); } void QCoeFepInputContext::GetScreenCoordinatesForFepL(TPoint& aLeftSideOfBaseLine, TInt& aHeight, TInt& aAscent, TInt /* aDocumentPosition */) const { QWidget *w = focusWidget(); if (!w) { aLeftSideOfBaseLine = TPoint(0,0); aHeight = 0; aAscent = 0; return; } QRect rect = w->inputMethodQuery(Qt::ImMicroFocus).value(); aLeftSideOfBaseLine.iX = rect.left(); aLeftSideOfBaseLine.iY = rect.bottom(); QFont font = w->inputMethodQuery(Qt::ImFont).value(); QFontMetrics metrics(font); aHeight = metrics.height(); aAscent = metrics.ascent(); } void QCoeFepInputContext::DoCommitFepInlineEditL() { commitCurrentString(false); if (QSysInfo::s60Version() > QSysInfo::SV_S60_5_0) ReportAknEdStateEvent(QT_EAknCursorPositionChanged); } void QCoeFepInputContext::commitCurrentString(bool cancelFepTransaction) { QList attributes; QInputMethodEvent event(QLatin1String(""), attributes); event.setCommitString(m_preeditString, 0, 0); m_preeditString.clear(); m_inlinePosition = 0; sendEvent(event); m_hasTempPreeditString = false; //Only cancel FEP transactions with prediction, when there is still active window. Qt::InputMethodHints currentHints = Qt::ImhNone; if (focusWidget()) { if (focusWidget()->focusProxy()) currentHints = focusWidget()->focusProxy()->inputMethodHints(); else currentHints = focusWidget()->inputMethodHints(); } bool predictive = !(currentHints & Qt::ImhNoPredictiveText); bool widgetAndWindowAvailable = QApplication::activeWindow() && focusWidget(); if (cancelFepTransaction && ((predictive && widgetAndWindowAvailable) || !predictive)) { CCoeFep* fep = CCoeEnv::Static()->Fep(); if (fep) fep->CancelTransaction(); } } MCoeFepAwareTextEditor_Extension1* QCoeFepInputContext::Extension1(TBool& aSetToTrue) { aSetToTrue = ETrue; return this; } void QCoeFepInputContext::SetStateTransferingOwnershipL(MCoeFepAwareTextEditor_Extension1::CState* aState, TUid /*aTypeSafetyUid*/) { // Note: The S60 docs are wrong! See the State() function. if (m_fepState) delete m_fepState; m_fepState = static_cast(aState); } MCoeFepAwareTextEditor_Extension1::CState* QCoeFepInputContext::State(TUid /*aTypeSafetyUid*/) { // Note: The S60 docs are horribly wrong when describing the // SetStateTransferingOwnershipL function and this function. They say that the former // sets a CState object identified by the TUid, and the latter retrieves it. // In reality, the CState is expected to always be a CAknEdwinState (even if it was not // previously set), and the TUid is ignored. All in all, there is a single CAknEdwinState // per QCoeFepInputContext, which should be deleted if the SetStateTransferingOwnershipL // function is used to set a new one. return m_fepState; } TTypeUid::Ptr QCoeFepInputContext::MopSupplyObject(TTypeUid /*id*/) { return TTypeUid::Null(); } MObjectProvider *QCoeFepInputContext::MopNext() { QWidget *w = focusWidget(); if (w) return w->effectiveWinId(); return 0; } QT_END_NAMESPACE #endif // QT_NO_IM