/**************************************************************************** ** ** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies). ** All rights reserved. ** Contact: Nokia Corporation (qt-info@nokia.com) ** ** This file is part of the QtGui module of the Qt Toolkit. ** ** $QT_BEGIN_LICENSE:LGPL$ ** GNU Lesser General Public License Usage ** This file may be used under the terms of the GNU Lesser General Public ** License version 2.1 as published by the Free Software Foundation and ** appearing in the file LICENSE.LGPL included in the packaging of this ** file. Please review the following information to ensure the GNU Lesser ** General Public License version 2.1 requirements will be met: ** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. ** ** In addition, as a special exception, Nokia gives you certain additional ** rights. These rights are described in the Nokia Qt LGPL Exception ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package. ** ** GNU General Public License Usage ** Alternatively, this file may be used under the terms of the GNU General ** Public License version 3.0 as published by the Free Software Foundation ** and appearing in the file LICENSE.GPL included in the packaging of this ** file. Please review the following information to ensure the GNU General ** Public License version 3.0 requirements will be met: ** http://www.gnu.org/copyleft/gpl.html. ** ** Other Usage ** Alternatively, this file may be used in accordance with the terms and ** conditions contained in a signed written agreement between you and Nokia. ** ** ** ** ** ** $QT_END_LICENSE$ ** ****************************************************************************/ #include "qtextengine_p.h" #include #include QT_BEGIN_NAMESPACE // set the glyph attributes heuristically. Assumes a 1 to 1 relationship between chars and glyphs // and no reordering. // also computes logClusters heuristically static void heuristicSetGlyphAttributes(const QChar *uc, int length, QGlyphLayout *glyphs, unsigned short *logClusters, int num_glyphs) { // ### zeroWidth and justification are missing here!!!!! Q_UNUSED(num_glyphs); // qDebug("QScriptEngine::heuristicSetGlyphAttributes, num_glyphs=%d", item->num_glyphs); const bool symbolFont = false; // #### glyphs->attributes[0].mark = false; glyphs->attributes[0].clusterStart = true; glyphs->attributes[0].dontPrint = (!symbolFont && uc[0].unicode() == 0x00ad) || qIsControlChar(uc[0].unicode()); int pos = 0; int lastCat = QChar::category(uc[0].unicode()); for (int i = 1; i < length; ++i) { if (logClusters[i] == pos) // same glyph continue; ++pos; while (pos < logClusters[i]) { ++pos; } // hide soft-hyphens by default if ((!symbolFont && uc[i].unicode() == 0x00ad) || qIsControlChar(uc[i].unicode())) glyphs->attributes[pos].dontPrint = true; const QUnicodeTables::Properties *prop = QUnicodeTables::properties(uc[i].unicode()); int cat = prop->category; // one gets an inter character justification point if the current char is not a non spacing mark. // as then the current char belongs to the last one and one gets a space justification point // after the space char. if (lastCat == QChar::Separator_Space) glyphs->attributes[pos-1].justification = HB_Space; else if (cat != QChar::Mark_NonSpacing) glyphs->attributes[pos-1].justification = HB_Character; else glyphs->attributes[pos-1].justification = HB_NoJustification; lastCat = cat; } pos = logClusters[length-1]; if (lastCat == QChar::Separator_Space) glyphs->attributes[pos].justification = HB_Space; else glyphs->attributes[pos].justification = HB_Character; } struct QArabicProperties { unsigned char shape; unsigned char justification; }; Q_DECLARE_TYPEINFO(QArabicProperties, Q_PRIMITIVE_TYPE); enum QArabicShape { XIsolated, XFinal, XInitial, XMedial, // intermediate state XCausing }; // these groups correspond to the groups defined in the Unicode standard. // Some of these groups are equal with regards to both joining and line breaking behaviour, // and thus have the same enum value // // I'm not sure the mapping of syriac to arabic enums is correct with regards to justification, but as // I couldn't find any better document I'll hope for the best. enum ArabicGroup { // NonJoining ArabicNone, ArabicSpace, // Transparent Transparent, // Causing Center, Kashida, // Arabic // Dual Beh, Noon, Meem = Noon, Heh = Noon, KnottedHeh = Noon, HehGoal = Noon, SwashKaf = Noon, Yeh, Hah, Seen, Sad = Seen, Tah, Kaf = Tah, Gaf = Tah, Lam = Tah, Ain, Feh = Ain, Qaf = Ain, // Right Alef, Waw, Dal, TehMarbuta = Dal, Reh, HamzaOnHehGoal, YehWithTail = HamzaOnHehGoal, YehBarre = HamzaOnHehGoal, // Syriac // Dual Beth = Beh, Gamal = Ain, Heth = Noon, Teth = Hah, Yudh = Noon, Kaph = Noon, Lamadh = Lam, Mim = Noon, Nun = Noon, Semakh = Noon, FinalSemakh = Noon, SyriacE = Ain, Pe = Ain, ReversedPe = Hah, Qaph = Noon, Shin = Noon, Fe = Ain, // Right Alaph = Alef, Dalath = Dal, He = Dal, SyriacWaw = Waw, Zain = Alef, YudhHe = Waw, Sadhe = HamzaOnHehGoal, Taw = Dal, // Compiler bug? Otherwise ArabicGroupsEnd would be equal to Dal + 1. Dummy = HamzaOnHehGoal, ArabicGroupsEnd }; static const unsigned char arabic_group[0x150] = { ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, Transparent, Transparent, Transparent, Transparent, Transparent, Transparent, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, Alef, Alef, Waw, Alef, Yeh, Alef, Beh, TehMarbuta, Beh, Beh, Hah, Hah, Hah, Dal, Dal, Reh, Reh, Seen, Seen, Sad, Sad, Tah, Tah, Ain, Ain, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, // 0x640 Kashida, Feh, Qaf, Kaf, Lam, Meem, Noon, Heh, Waw, Yeh, Yeh, Transparent, Transparent, Transparent, Transparent, Transparent, Transparent, Transparent, Transparent, Transparent, Transparent, Transparent, Transparent, Transparent, Transparent, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, Beh, Qaf, Transparent, Alef, Alef, Alef, ArabicNone, Alef, Waw, Waw, Yeh, Beh, Beh, Beh, Beh, Beh, Beh, Beh, // 0x680 Beh, Hah, Hah, Hah, Hah, Hah, Hah, Hah, Dal, Dal, Dal, Dal, Dal, Dal, Dal, Dal, Dal, Reh, Reh, Reh, Reh, Reh, Reh, Reh, Reh, Reh, Seen, Seen, Seen, Sad, Sad, Tah, Ain, Feh, Feh, Feh, Feh, Feh, Feh, Qaf, Qaf, Gaf, SwashKaf, Gaf, Kaf, Kaf, Kaf, Gaf, Gaf, Gaf, Gaf, Gaf, Gaf, Lam, Lam, Lam, Lam, Noon, Noon, Noon, Noon, Noon, KnottedHeh, Hah, // 0x6c0 TehMarbuta, HehGoal, HamzaOnHehGoal, HamzaOnHehGoal, Waw, Waw, Waw, Waw, Waw, Waw, Waw, Waw, Yeh, YehWithTail, Yeh, Waw, Yeh, Yeh, YehBarre, YehBarre, ArabicNone, TehMarbuta, Transparent, Transparent, Transparent, Transparent, Transparent, Transparent, Transparent, ArabicNone, ArabicNone, Transparent, Transparent, Transparent, Transparent, Transparent, Transparent, ArabicNone, ArabicNone, Transparent, Transparent, ArabicNone, Transparent, Transparent, Transparent, Transparent, Dal, Reh, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, Seen, Sad, Ain, ArabicNone, ArabicNone, KnottedHeh, // 0x700 ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, ArabicNone, Alaph, Transparent, Beth, Gamal, Gamal, Dalath, Dalath, He, SyriacWaw, Zain, Heth, Teth, Teth, Yudh, YudhHe, Kaph, Lamadh, Mim, Nun, Semakh, FinalSemakh, SyriacE, Pe, ReversedPe, Sadhe, Qaph, Dalath, Shin, Taw, Beth, Gamal, Dalath, Transparent, Transparent, Transparent, Transparent, Transparent, Transparent, Transparent, Transparent, Transparent, Transparent, Transparent, Transparent, Transparent, Transparent, Transparent, Transparent, Transparent, Transparent, Transparent, Transparent, Transparent, Transparent, Transparent, Transparent, Transparent, Transparent, Transparent, ArabicNone, ArabicNone, Zain, Kaph, Fe, }; static inline ArabicGroup arabicGroup(unsigned short uc) { if (uc >= 0x0600 && uc < 0x750) return (ArabicGroup) arabic_group[uc-0x600]; else if (uc == 0x200d) return Center; else if (QChar::category(uc) == QChar::Separator_Space) return ArabicSpace; else return ArabicNone; } /* Arabic shaping obeys a number of rules according to the joining classes (see Unicode book, section on arabic). Each unicode char has a joining class (right, dual (left&right), center (joincausing) or transparent). transparent joining is not encoded in QChar::joining(), but applies to all combining marks and format marks. Right join-causing: dual + center Left join-causing: dual + right + center Rules are as follows (for a string already in visual order, as we have it here): R1 Transparent characters do not affect joining behaviour. R2 A right joining character, that has a right join-causing char on the right will get form XRight (R3 A left joining character, that has a left join-causing char on the left will get form XLeft) Note: the above rule is meaningless, as there are no pure left joining characters defined in Unicode R4 A dual joining character, that has a left join-causing char on the left and a right join-causing char on the right will get form XMedial R5 A dual joining character, that has a right join causing char on the right, and no left join causing char on the left will get form XRight R6 A dual joining character, that has a left join causing char on the left, and no right join causing char on the right will get form XLeft R7 Otherwise the character will get form XIsolated Additionally we have to do the minimal ligature support for lam-alef ligatures: L1 Transparent characters do not affect ligature behaviour. L2 Any sequence of Alef(XRight) + Lam(XMedial) will form the ligature Alef.Lam(XLeft) L3 Any sequence of Alef(XRight) + Lam(XLeft) will form the ligature Alef.Lam(XIsolated) The state table below handles rules R1-R7. */ enum Joining { JNone, JCausing, JDual, JRight, JTransparent }; static const Joining joining_for_group[ArabicGroupsEnd] = { // NonJoining JNone, // ArabicNone JNone, // ArabicSpace // Transparent JTransparent, // Transparent // Causing JCausing, // Center JCausing, // Kashida // Dual JDual, // Beh JDual, // Noon JDual, // Yeh JDual, // Hah JDual, // Seen JDual, // Tah JDual, // Ain // Right JRight, // Alef JRight, // Waw JRight, // Dal JRight, // Reh JRight // HamzaOnHehGoal }; struct JoiningPair { QArabicShape form1; QArabicShape form2; }; static const JoiningPair joining_table[5][4] = // None, Causing, Dual, Right { { { XIsolated, XIsolated }, { XIsolated, XCausing }, { XIsolated, XInitial }, { XIsolated, XIsolated } }, // XIsolated { { XFinal, XIsolated }, { XFinal, XCausing }, { XFinal, XInitial }, { XFinal, XIsolated } }, // XFinal { { XIsolated, XIsolated }, { XInitial, XCausing }, { XInitial, XMedial }, { XInitial, XFinal } }, // XInitial { { XFinal, XIsolated }, { XMedial, XCausing }, { XMedial, XMedial }, { XMedial, XFinal } }, // XMedial { { XIsolated, XIsolated }, { XIsolated, XCausing }, { XIsolated, XMedial }, { XIsolated, XFinal } }, // XCausing }; /* According to http://www.microsoft.com/middleeast/Arabicdev/IE6/KBase.asp 1. Find the priority of the connecting opportunities in each word 2. Add expansion at the highest priority connection opportunity 3. If more than one connection opportunity have the same highest value, use the opportunity closest to the end of the word. Following is a chart that provides the priority for connection opportunities and where expansion occurs. The character group names are those in table 6.6 of the UNICODE 2.0 book. PrioritY Glyph Condition Kashida Location Arabic_Kashida User inserted Kashida The user entered a Kashida in a position. After the user (Shift+j or Shift+[E with hat]) Thus, it is the highest priority to insert an inserted kashida automatic kashida. Arabic_Seen Seen, Sad Connecting to the next character. After the character. (Initial or medial form). Arabic_HaaDal Teh Marbutah, Haa, Dal Connecting to previous character. Before the final form of these characters. Arabic_Alef Alef, Tah, Lam, Connecting to previous character. Before the final form Kaf and Gaf of these characters. Arabic_BaRa Reh, Yeh Connected to medial Beh Before preceding medial Baa Arabic_Waw Waw, Ain, Qaf, Feh Connecting to previous character. Before the final form of these characters. Arabic_Normal Other connecting Connecting to previous character. Before the final form characters of these characters. This seems to imply that we have at most one kashida point per arabic word. */ void qt_getArabicProperties(const unsigned short *chars, int len, QArabicProperties *properties) { // qDebug("arabicSyriacOpenTypeShape: properties:"); int lastPos = 0; int lastGroup = ArabicNone; ArabicGroup group = arabicGroup(chars[0]); Joining j = joining_for_group[group]; QArabicShape shape = joining_table[XIsolated][j].form2; properties[0].justification = HB_NoJustification; for (int i = 1; i < len; ++i) { // #### fix handling for spaces and punktuation properties[i].justification = HB_NoJustification; group = arabicGroup(chars[i]); j = joining_for_group[group]; if (j == JTransparent) { properties[i].shape = XIsolated; continue; } properties[lastPos].shape = joining_table[shape][j].form1; shape = joining_table[shape][j].form2; switch(lastGroup) { case Seen: if (properties[lastPos].shape == XInitial || properties[lastPos].shape == XMedial) properties[i-1].justification = HB_Arabic_Seen; break; case Hah: if (properties[lastPos].shape == XFinal) properties[lastPos-1].justification = HB_Arabic_HaaDal; break; case Alef: if (properties[lastPos].shape == XFinal) properties[lastPos-1].justification = HB_Arabic_Alef; break; case Ain: if (properties[lastPos].shape == XFinal) properties[lastPos-1].justification = HB_Arabic_Waw; break; case Noon: if (properties[lastPos].shape == XFinal) properties[lastPos-1].justification = HB_Arabic_Normal; break; case ArabicNone: break; default: Q_ASSERT(false); } lastGroup = ArabicNone; switch(group) { case ArabicNone: case Transparent: // ### Center should probably be treated as transparent when it comes to justification. case Center: break; case ArabicSpace: properties[i].justification = HB_Arabic_Space; break; case Kashida: properties[i].justification = HB_Arabic_Kashida; break; case Seen: lastGroup = Seen; break; case Hah: case Dal: lastGroup = Hah; break; case Alef: case Tah: lastGroup = Alef; break; case Yeh: case Reh: if (properties[lastPos].shape == XMedial && arabicGroup(chars[lastPos]) == Beh) properties[lastPos-1].justification = HB_Arabic_BaRa; break; case Ain: case Waw: lastGroup = Ain; break; case Noon: case Beh: case HamzaOnHehGoal: lastGroup = Noon; break; case ArabicGroupsEnd: Q_ASSERT(false); } lastPos = i; } properties[lastPos].shape = joining_table[shape][JNone].form1; // for (int i = 0; i < len; ++i) // qDebug("arabic properties(%d): uc=%x shape=%d, justification=%d", i, chars[i], properties[i].shape, properties[i].justification); } void QTextEngine::shapeTextMac(int item) const { QScriptItem &si = layoutData->items[item]; si.glyph_data_offset = layoutData->used; QFontEngine *font = fontEngine(si, &si.ascent, &si.descent, &si.leading); if (font->type() != QFontEngine::Multi) { shapeTextWithHarfbuzz(item); return; } #ifndef QT_MAC_USE_COCOA QFontEngineMacMulti *fe = static_cast(font); #else QCoreTextFontEngineMulti *fe = static_cast(font); #endif QTextEngine::ShaperFlags flags; if (si.analysis.bidiLevel % 2) flags |= RightToLeft; if (option.useDesignMetrics()) flags |= DesignMetrics; attributes(); // pre-initialize char attributes const int len = length(item); int num_glyphs = length(item); const QChar *str = layoutData->string.unicode() + si.position; ushort upperCased[256]; if (si.analysis.flags == QScriptAnalysis::SmallCaps || si.analysis.flags == QScriptAnalysis::Uppercase || si.analysis.flags == QScriptAnalysis::Lowercase) { ushort *uc = upperCased; if (len > 256) uc = new ushort[len]; for (int i = 0; i < len; ++i) { if(si.analysis.flags == QScriptAnalysis::Lowercase) uc[i] = str[i].toLower().unicode(); else uc[i] = str[i].toUpper().unicode(); } str = reinterpret_cast(uc); } ensureSpace(num_glyphs); num_glyphs = layoutData->glyphLayout.numGlyphs - layoutData->used; QGlyphLayout g = availableGlyphs(&si); g.numGlyphs = num_glyphs; unsigned short *log_clusters = logClusters(&si); bool stringToCMapFailed = false; // Skip shaping of line or paragraph separators since we are not // going to draw them anyway if (si.analysis.flags == QScriptAnalysis::LineOrParagraphSeparator && !(option.flags() & QTextOption::ShowLineAndParagraphSeparators)) goto cleanUp; if (!fe->stringToCMap(str, len, &g, &num_glyphs, flags, log_clusters, attributes(), &si)) { ensureSpace(num_glyphs); g = availableGlyphs(&si); stringToCMapFailed = !fe->stringToCMap(str, len, &g, &num_glyphs, flags, log_clusters, attributes(), &si); } if (!stringToCMapFailed) { heuristicSetGlyphAttributes(str, len, &g, log_clusters, num_glyphs); si.num_glyphs = num_glyphs; layoutData->used += si.num_glyphs; QGlyphLayout g = shapedGlyphs(&si); if (si.analysis.script == QUnicodeTables::Arabic) { QVarLengthArray props(len + 2); QArabicProperties *properties = props.data(); int f = si.position; int l = len; if (f > 0) { --f; ++l; ++properties; } if (f + l < layoutData->string.length()) { ++l; } qt_getArabicProperties((const unsigned short *)(layoutData->string.unicode()+f), l, props.data()); unsigned short *log_clusters = logClusters(&si); for (int i = 0; i < len; ++i) { int gpos = log_clusters[i]; g.attributes[gpos].justification = properties[i].justification; } } } cleanUp: const ushort *uc = reinterpret_cast(str); if ((si.analysis.flags == QScriptAnalysis::SmallCaps || si.analysis.flags == QScriptAnalysis::Uppercase || si.analysis.flags == QScriptAnalysis::Lowercase) && uc != upperCased) delete [] uc; } QT_END_NAMESPACE