/**************************************************************************** ** ** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). ** All rights reserved. ** Contact: Nokia Corporation (qt-info@nokia.com) ** ** This file is part of the QtNetwork module of the Qt Toolkit. ** ** $QT_BEGIN_LICENSE:LGPL$ ** No Commercial Usage ** This file contains pre-release code and may not be distributed. ** You may use this file in accordance with the terms and conditions ** contained in the Technology Preview License Agreement accompanying ** this package. ** ** GNU Lesser General Public License Usage ** Alternatively, this file may be used under the terms of the GNU Lesser ** General Public License version 2.1 as published by the Free Software ** Foundation and appearing in the file LICENSE.LGPL included in the ** packaging of this file. Please review the following information to ** ensure the GNU Lesser General Public License version 2.1 requirements ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. ** ** In addition, as a special exception, Nokia gives you certain additional ** rights. These rights are described in the Nokia Qt LGPL Exception ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package. ** ** If you have questions regarding the use of this file, please contact ** Nokia at qt-info@nokia.com. ** ** ** ** ** ** ** ** ** $QT_END_LICENSE$ ** ****************************************************************************/ #include "qhttpnetworkconnection_p.h" #include "qhttpnetworkconnectionchannel_p.h" #include "private/qnoncontiguousbytedevice_p.h" #include #include #ifndef QT_NO_HTTP #ifndef QT_NO_OPENSSL # include # include # include #endif QT_BEGIN_NAMESPACE // TODO: Put channel specific stuff here so it does not polute qhttpnetworkconnection.cpp void QHttpNetworkConnectionChannel::init() { #ifndef QT_NO_OPENSSL if (connection->d_func()->encrypt) socket = new QSslSocket; else socket = new QTcpSocket; #else socket = new QTcpSocket; #endif // limit the socket read buffer size. we will read everything into // the QHttpNetworkReply anyway, so let's grow only that and not // here and there. socket->setReadBufferSize(64*1024); QObject::connect(socket, SIGNAL(bytesWritten(qint64)), this, SLOT(_q_bytesWritten(qint64)), Qt::DirectConnection); QObject::connect(socket, SIGNAL(connected()), this, SLOT(_q_connected()), Qt::DirectConnection); QObject::connect(socket, SIGNAL(readyRead()), this, SLOT(_q_readyRead()), Qt::DirectConnection); QObject::connect(socket, SIGNAL(disconnected()), this, SLOT(_q_disconnected()), Qt::DirectConnection); QObject::connect(socket, SIGNAL(error(QAbstractSocket::SocketError)), this, SLOT(_q_error(QAbstractSocket::SocketError)), Qt::DirectConnection); #ifndef QT_NO_NETWORKPROXY QObject::connect(socket, SIGNAL(proxyAuthenticationRequired(const QNetworkProxy&, QAuthenticator*)), this, SLOT(_q_proxyAuthenticationRequired(const QNetworkProxy&, QAuthenticator*)), Qt::DirectConnection); #endif #ifndef QT_NO_OPENSSL QSslSocket *sslSocket = qobject_cast(socket); if (sslSocket) { // won't be a sslSocket if encrypt is false QObject::connect(sslSocket, SIGNAL(encrypted()), this, SLOT(_q_encrypted()), Qt::DirectConnection); QObject::connect(sslSocket, SIGNAL(sslErrors(const QList&)), this, SLOT(_q_sslErrors(const QList&)), Qt::DirectConnection); QObject::connect(sslSocket, SIGNAL(encryptedBytesWritten(qint64)), this, SLOT(_q_encryptedBytesWritten(qint64)), Qt::DirectConnection); } #endif } void QHttpNetworkConnectionChannel::close() { socket->blockSignals(true); socket->close(); socket->blockSignals(false); state = QHttpNetworkConnectionChannel::IdleState; } bool QHttpNetworkConnectionChannel::sendRequest() { switch (state) { case QHttpNetworkConnectionChannel::IdleState: { // write the header if (!ensureConnection()) { // wait for the connection (and encryption) to be done // sendRequest will be called again from either // _q_connected or _q_encrypted return false; } written = 0; // excluding the header bytesTotal = 0; if (reply) { reply->d_func()->clear(); reply->d_func()->connection = connection; reply->d_func()->autoDecompress = request.d->autoDecompress; reply->d_func()->pipeliningUsed = false; } state = QHttpNetworkConnectionChannel::WritingState; pendingEncrypt = false; // if the url contains authentication parameters, use the new ones // both channels will use the new authentication parameters if (!request.url().userInfo().isEmpty()) { QUrl url = request.url(); QAuthenticator &auth = authenticator; if (url.userName() != auth.user() || (!url.password().isEmpty() && url.password() != auth.password())) { auth.setUser(url.userName()); auth.setPassword(url.password()); connection->d_func()->copyCredentials(connection->d_func()->indexOf(socket), &auth, false); } // clear the userinfo, since we use the same request for resending // userinfo in url can conflict with the one in the authenticator url.setUserInfo(QString()); request.setUrl(url); } connection->d_func()->createAuthorization(socket, request); #ifndef QT_NO_NETWORKPROXY QByteArray header = QHttpNetworkRequestPrivate::header(request, (connection->d_func()->networkProxy.type() != QNetworkProxy::NoProxy)); #else QByteArray header = QHttpNetworkRequestPrivate::header(request, false); #endif socket->write(header); QNonContiguousByteDevice* uploadByteDevice = request.uploadByteDevice(); if (uploadByteDevice) { // connect the signals so this function gets called again QObject::connect(uploadByteDevice, SIGNAL(readyRead()),this, SLOT(_q_uploadDataReadyRead())); bytesTotal = request.contentLength(); } else { state = QHttpNetworkConnectionChannel::WaitingState; sendRequest(); break; } // write the initial chunk together with the headers // fall through } case QHttpNetworkConnectionChannel::WritingState: { // write the data QNonContiguousByteDevice* uploadByteDevice = request.uploadByteDevice(); if (!uploadByteDevice || bytesTotal == written) { if (uploadByteDevice) emit reply->dataSendProgress(written, bytesTotal); state = QHttpNetworkConnectionChannel::WaitingState; // now wait for response sendRequest(); break; } // only feed the QTcpSocket buffer when there is less than 32 kB in it const qint64 socketBufferFill = 32*1024; const qint64 socketWriteMaxSize = 16*1024; #ifndef QT_NO_OPENSSL QSslSocket *sslSocket = qobject_cast(socket); // if it is really an ssl socket, check more than just bytesToWrite() while ((socket->bytesToWrite() + (sslSocket ? sslSocket->encryptedBytesToWrite() : 0)) <= socketBufferFill && bytesTotal != written) #else while (socket->bytesToWrite() <= socketBufferFill && bytesTotal != written) #endif { // get pointer to upload data qint64 currentReadSize; qint64 desiredReadSize = qMin(socketWriteMaxSize, bytesTotal - written); const char *readPointer = uploadByteDevice->readPointer(desiredReadSize, currentReadSize); if (currentReadSize == -1) { // premature eof happened connection->d_func()->emitReplyError(socket, reply, QNetworkReply::UnknownNetworkError); return false; break; } else if (readPointer == 0 || currentReadSize == 0) { // nothing to read currently, break the loop break; } else { qint64 currentWriteSize = socket->write(readPointer, currentReadSize); if (currentWriteSize == -1 || currentWriteSize != currentReadSize) { // socket broke down connection->d_func()->emitReplyError(socket, reply, QNetworkReply::UnknownNetworkError); return false; } else { written += currentWriteSize; uploadByteDevice->advanceReadPointer(currentWriteSize); emit reply->dataSendProgress(written, bytesTotal); if (written == bytesTotal) { // make sure this function is called once again state = QHttpNetworkConnectionChannel::WaitingState; sendRequest(); break; } } } } break; } case QHttpNetworkConnectionChannel::WaitingState: { QNonContiguousByteDevice* uploadByteDevice = request.uploadByteDevice(); if (uploadByteDevice) { QObject::disconnect(uploadByteDevice, SIGNAL(readyRead()), this, SLOT(_q_uploadDataReadyRead())); } // HTTP pipelining connection->d_func()->fillPipeline(socket); socket->flush(); // ensure we try to receive a reply in all cases, even if _q_readyRead_ hat not been called // this is needed if the sends an reply before we have finished sending the request. In that // case receiveReply had been called before but ignored the server reply receiveReply(); break; } case QHttpNetworkConnectionChannel::ReadingState: case QHttpNetworkConnectionChannel::Wait4AuthState: // ignore _q_bytesWritten in these states // fall through default: break; } return true; } void QHttpNetworkConnectionChannel::receiveReply() { Q_ASSERT(socket); qint64 bytes = 0; QAbstractSocket::SocketState socketState = socket->state(); // connection might be closed to signal the end of data if (socketState == QAbstractSocket::UnconnectedState) { if (!socket->bytesAvailable()) { if (reply && reply->d_func()->state == QHttpNetworkReplyPrivate::ReadingDataState) { reply->d_func()->state = QHttpNetworkReplyPrivate::AllDoneState; this->state = QHttpNetworkConnectionChannel::IdleState; allDone(); } else { // try to reconnect/resend before sending an error. if (reconnectAttempts-- > 0) { closeAndResendCurrentRequest(); } else if (reply) { reply->d_func()->errorString = connection->d_func()->errorDetail(QNetworkReply::RemoteHostClosedError, socket); emit reply->finishedWithError(QNetworkReply::RemoteHostClosedError, reply->d_func()->errorString); QMetaObject::invokeMethod(connection, "_q_startNextRequest", Qt::QueuedConnection); } } } } // read loop for the response while (socket->bytesAvailable()) { QHttpNetworkReplyPrivate::ReplyState state = reply ? reply->d_func()->state : QHttpNetworkReplyPrivate::AllDoneState; switch (state) { case QHttpNetworkReplyPrivate::NothingDoneState: case QHttpNetworkReplyPrivate::ReadingStatusState: { eatWhitespace(); qint64 statusBytes = reply->d_func()->readStatus(socket); if (statusBytes == -1 && reconnectAttempts <= 0) { // too many errors reading/receiving/parsing the status, close the socket and emit error close(); reply->d_func()->errorString = connection->d_func()->errorDetail(QNetworkReply::ProtocolFailure, socket); emit reply->finishedWithError(QNetworkReply::ProtocolFailure, reply->d_func()->errorString); QMetaObject::invokeMethod(connection, "_q_startNextRequest", Qt::QueuedConnection); break; } else if (statusBytes == -1) { reconnectAttempts--; reply->d_func()->clear(); closeAndResendCurrentRequest(); break; } bytes += statusBytes; lastStatus = reply->d_func()->statusCode; break; } case QHttpNetworkReplyPrivate::ReadingHeaderState: bytes += reply->d_func()->readHeader(socket); if (reply->d_func()->state == QHttpNetworkReplyPrivate::ReadingDataState) { if (reply->d_func()->isGzipped() && reply->d_func()->autoDecompress) { // remove the Content-Length from header reply->d_func()->removeAutoDecompressHeader(); } else { reply->d_func()->autoDecompress = false; } if (reply && reply->d_func()->statusCode == 100) { reply->d_func()->state = QHttpNetworkReplyPrivate::ReadingStatusState; break; // ignore } if (reply->d_func()->shouldEmitSignals()) emit reply->headerChanged(); if (!reply->d_func()->expectContent()) { reply->d_func()->state = QHttpNetworkReplyPrivate::AllDoneState; this->state = QHttpNetworkConnectionChannel::IdleState; allDone(); return; } } break; case QHttpNetworkReplyPrivate::ReadingDataState: { if (!reply->d_func()->isChunked() && !reply->d_func()->autoDecompress && reply->d_func()->bodyLength > 0) { // bulk files like images should fulfill these properties and // we can therefore save on memory copying bytes = reply->d_func()->readBodyFast(socket, &reply->d_func()->responseData); reply->d_func()->totalProgress += bytes; if (reply->d_func()->shouldEmitSignals()) { QPointer replyPointer = reply; emit reply->readyRead(); // make sure that the reply is valid if (replyPointer.isNull()) return; emit reply->dataReadProgress(reply->d_func()->totalProgress, reply->d_func()->bodyLength); // make sure that the reply is valid if (replyPointer.isNull()) return; } } else { // use the traditional slower reading (for compressed encoding, chunked encoding, // no content-length etc) QByteDataBuffer byteDatas; bytes = reply->d_func()->readBody(socket, &byteDatas); if (bytes) { if (reply->d_func()->autoDecompress) reply->d_func()->appendCompressedReplyData(byteDatas); else reply->d_func()->appendUncompressedReplyData(byteDatas); if (!reply->d_func()->autoDecompress) { reply->d_func()->totalProgress += bytes; if (reply->d_func()->shouldEmitSignals()) { QPointer replyPointer = reply; // important: At the point of this readyRead(), the byteDatas list must be empty, // else implicit sharing will trigger memcpy when the user is reading data! emit reply->readyRead(); // make sure that the reply is valid if (replyPointer.isNull()) return; emit reply->dataReadProgress(reply->d_func()->totalProgress, reply->d_func()->bodyLength); // make sure that the reply is valid if (replyPointer.isNull()) return; } } #ifndef QT_NO_COMPRESS else if (!expand(false)) { // expand a chunk if possible return; // ### expand failed } #endif } } if (reply->d_func()->state == QHttpNetworkReplyPrivate::ReadingDataState) break; // everything done, fall through } case QHttpNetworkReplyPrivate::AllDoneState: this->state = QHttpNetworkConnectionChannel::IdleState; allDone(); break; default: break; } } } bool QHttpNetworkConnectionChannel::ensureConnection() { // make sure that this socket is in a connected state, if not initiate // connection to the host. if (socket->state() != QAbstractSocket::ConnectedState) { // connect to the host if not already connected. // resend this request after we receive the disconnected signal if (socket->state() == QAbstractSocket::ClosingState) { resendCurrent = true; return false; } state = QHttpNetworkConnectionChannel::ConnectingState; pendingEncrypt = connection->d_func()->encrypt; // reset state pipeliningSupported = PipeliningSupportUnknown; // This workaround is needed since we use QAuthenticator for NTLM authentication. The "phase == Done" // is the usual criteria for emitting authentication signals. The "phase" is set to "Done" when the // last header for Authorization is generated by the QAuthenticator. Basic & Digest logic does not // check the "phase" for generating the Authorization header. NTLM authentication is a two stage // process & needs the "phase". To make sure the QAuthenticator uses the current username/password // the phase is reset to Start. QAuthenticatorPrivate *priv = QAuthenticatorPrivate::getPrivate(authenticator); if (priv && priv->phase == QAuthenticatorPrivate::Done) priv->phase = QAuthenticatorPrivate::Start; priv = QAuthenticatorPrivate::getPrivate(proxyAuthenticator); if (priv && priv->phase == QAuthenticatorPrivate::Done) priv->phase = QAuthenticatorPrivate::Start; QString connectHost = connection->d_func()->hostName; qint16 connectPort = connection->d_func()->port; #ifndef QT_NO_NETWORKPROXY // HTTPS always use transparent proxy. if (connection->d_func()->networkProxy.type() != QNetworkProxy::NoProxy && !connection->d_func()->encrypt) { connectHost = connection->d_func()->networkProxy.hostName(); connectPort = connection->d_func()->networkProxy.port(); } #endif if (connection->d_func()->encrypt) { #ifndef QT_NO_OPENSSL QSslSocket *sslSocket = qobject_cast(socket); sslSocket->connectToHostEncrypted(connectHost, connectPort); if (ignoreAllSslErrors) sslSocket->ignoreSslErrors(); sslSocket->ignoreSslErrors(ignoreSslErrorsList); #else connection->d_func()->emitReplyError(socket, reply, QNetworkReply::ProtocolUnknownError); #endif } else { socket->connectToHost(connectHost, connectPort); } return false; } return true; } #ifndef QT_NO_COMPRESS bool QHttpNetworkConnectionChannel::expand(bool dataComplete) { Q_ASSERT(socket); Q_ASSERT(reply); qint64 total = reply->d_func()->compressedData.size(); if (total >= CHUNK || dataComplete) { // uncompress the data QByteArray content, inflated; content = reply->d_func()->compressedData; reply->d_func()->compressedData.clear(); int ret = Z_OK; if (content.size()) ret = reply->d_func()->gunzipBodyPartially(content, inflated); int retCheck = (dataComplete) ? Z_STREAM_END : Z_OK; if (ret >= retCheck) { if (inflated.size()) { reply->d_func()->totalProgress += inflated.size(); reply->d_func()->appendUncompressedReplyData(inflated); if (reply->d_func()->shouldEmitSignals()) { QPointer replyPointer = reply; // important: At the point of this readyRead(), inflated must be cleared, // else implicit sharing will trigger memcpy when the user is reading data! emit reply->readyRead(); // make sure that the reply is valid if (replyPointer.isNull()) return true; emit reply->dataReadProgress(reply->d_func()->totalProgress, 0); // make sure that the reply is valid if (replyPointer.isNull()) return true; } } } else { connection->d_func()->emitReplyError(socket, reply, QNetworkReply::ProtocolFailure); return false; } } return true; } #endif void QHttpNetworkConnectionChannel::allDone() { #ifndef QT_NO_COMPRESS // expand the whole data. if (reply->d_func()->expectContent() && reply->d_func()->autoDecompress && !reply->d_func()->streamEnd) expand(true); // ### if expand returns false, its an error #endif // while handling 401 & 407, we might reset the status code, so save this. bool emitFinished = reply->d_func()->shouldEmitSignals(); handleStatus(); // ### at this point there should be no more data on the socket // close if server requested if (reply->d_func()->isConnectionCloseEnabled()) close(); // queue the finished signal, this is required since we might send new requests from // slot connected to it. The socket will not fire readyRead signal, if we are already // in the slot connected to readyRead if (emitFinished) QMetaObject::invokeMethod(reply, "finished", Qt::QueuedConnection); // reset the reconnection attempts after we receive a complete reply. // in case of failures, each channel will attempt two reconnects before emitting error. reconnectAttempts = 2; detectPipeliningSupport(); // move next from pipeline to current request if (!alreadyPipelinedRequests.isEmpty()) { if (resendCurrent || reply->d_func()->isConnectionCloseEnabled() || socket->state() != QAbstractSocket::ConnectedState) { // move the pipelined ones back to the main queue requeueCurrentlyPipelinedRequests(); close(); } else { // there were requests pipelined in and we can continue HttpMessagePair messagePair = alreadyPipelinedRequests.takeFirst(); request = messagePair.first; reply = messagePair.second; state = QHttpNetworkConnectionChannel::ReadingState; resendCurrent = false; written = 0; // message body, excluding the header, irrelevant here bytesTotal = 0; // message body total, excluding the header, irrelevant here // pipeline even more connection->d_func()->fillPipeline(socket); // continue reading receiveReply(); } } else if (alreadyPipelinedRequests.isEmpty() && socket->bytesAvailable() > 0) { eatWhitespace(); // this is weird. we had nothing pipelined but still bytes available. better close it. if (socket->bytesAvailable() > 0) close(); QMetaObject::invokeMethod(connection, "_q_startNextRequest", Qt::QueuedConnection); } else if (alreadyPipelinedRequests.isEmpty()) { QMetaObject::invokeMethod(connection, "_q_startNextRequest", Qt::QueuedConnection); } } void QHttpNetworkConnectionChannel::detectPipeliningSupport() { // detect HTTP Pipelining support QByteArray serverHeaderField = reply->headerField("Server"); if ( // check for broken servers in server reply header // this is adapted from http://mxr.mozilla.org/firefox/ident?i=SupportsPipelining (!serverHeaderField.contains("Microsoft-IIS/4.")) && (!serverHeaderField.contains("Microsoft-IIS/5.")) && (!serverHeaderField.contains("Netscape-Enterprise/3.")) // check for HTTP/1.1 && (reply->d_func()->majorVersion == 1 && reply->d_func()->minorVersion == 1) // check for not having connection close && (!reply->d_func()->isConnectionCloseEnabled()) // check if it is still connected && (socket->state() == QAbstractSocket::ConnectedState) ) { pipeliningSupported = QHttpNetworkConnectionChannel::PipeliningProbablySupported; } else { pipeliningSupported = QHttpNetworkConnectionChannel::PipeliningSupportUnknown; } } // called when the connection broke and we need to queue some pipelined requests again void QHttpNetworkConnectionChannel::requeueCurrentlyPipelinedRequests() { for (int i = 0; i < alreadyPipelinedRequests.length(); i++) connection->d_func()->requeueRequest(alreadyPipelinedRequests.at(i)); alreadyPipelinedRequests.clear(); QMetaObject::invokeMethod(connection, "_q_startNextRequest", Qt::QueuedConnection); } void QHttpNetworkConnectionChannel::eatWhitespace() { char c; while (socket->bytesAvailable()) { if (socket->peek(&c, 1) != 1) return; // read all whitespace and line endings if (c == 11 || c == '\n' || c == '\r' || c == ' ' || c == 31) { socket->read(&c, 1); continue; } else { break; } } } void QHttpNetworkConnectionChannel::handleStatus() { Q_ASSERT(socket); Q_ASSERT(reply); int statusCode = reply->statusCode(); bool resend = false; switch (statusCode) { case 401: // auth required case 407: // proxy auth required if (connection->d_func()->handleAuthenticateChallenge(socket, reply, (statusCode == 407), resend)) { if (resend) { QNonContiguousByteDevice* uploadByteDevice = request.uploadByteDevice(); if (uploadByteDevice) { if (uploadByteDevice->reset()) { written = 0; } else { connection->d_func()->emitReplyError(socket, reply, QNetworkReply::ContentReSendError); break; } } reply->d_func()->eraseData(); if (alreadyPipelinedRequests.isEmpty()) { // this does a re-send without closing the connection resendCurrent = true; QMetaObject::invokeMethod(connection, "_q_startNextRequest", Qt::QueuedConnection); } else { // we had requests pipelined.. better close the connection in closeAndResendCurrentRequest closeAndResendCurrentRequest(); QMetaObject::invokeMethod(connection, "_q_startNextRequest", Qt::QueuedConnection); } } } else { emit reply->headerChanged(); emit reply->readyRead(); QNetworkReply::NetworkError errorCode = (statusCode == 407) ? QNetworkReply::ProxyAuthenticationRequiredError : QNetworkReply::AuthenticationRequiredError; reply->d_func()->errorString = connection->d_func()->errorDetail(errorCode, socket); emit connection->error(errorCode, reply->d_func()->errorString); emit reply->finished(); } break; default: QMetaObject::invokeMethod(connection, "_q_startNextRequest", Qt::QueuedConnection); } } void QHttpNetworkConnectionChannel::pipelineInto(HttpMessagePair &pair) { // this is only called for simple GET QHttpNetworkRequest &request = pair.first; QHttpNetworkReply *reply = pair.second; if (reply) { reply->d_func()->clear(); reply->d_func()->connection = connection; reply->d_func()->autoDecompress = request.d->autoDecompress; reply->d_func()->pipeliningUsed = true; } #ifndef QT_NO_NETWORKPROXY QByteArray header = QHttpNetworkRequestPrivate::header(request, (connection->d_func()->networkProxy.type() != QNetworkProxy::NoProxy)); #else QByteArray header = QHttpNetworkRequestPrivate::header(request, false); #endif socket->write(header); alreadyPipelinedRequests.append(pair); } void QHttpNetworkConnectionChannel::closeAndResendCurrentRequest() { requeueCurrentlyPipelinedRequests(); close(); resendCurrent = true; QMetaObject::invokeMethod(connection, "_q_startNextRequest", Qt::QueuedConnection); } bool QHttpNetworkConnectionChannel::isSocketBusy() const { return (state & QHttpNetworkConnectionChannel::BusyState); } bool QHttpNetworkConnectionChannel::isSocketWriting() const { return (state & QHttpNetworkConnectionChannel::WritingState); } bool QHttpNetworkConnectionChannel::isSocketWaiting() const { return (state & QHttpNetworkConnectionChannel::WaitingState); } bool QHttpNetworkConnectionChannel::isSocketReading() const { return (state & QHttpNetworkConnectionChannel::ReadingState); } //private slots void QHttpNetworkConnectionChannel::_q_readyRead() { if (isSocketWaiting() || isSocketReading()) { state = QHttpNetworkConnectionChannel::ReadingState; if (reply) receiveReply(); } } void QHttpNetworkConnectionChannel::_q_bytesWritten(qint64 bytes) { Q_UNUSED(bytes); // bytes have been written to the socket. write even more of them :) if (isSocketWriting()) sendRequest(); // otherwise we do nothing } void QHttpNetworkConnectionChannel::_q_disconnected() { // read the available data before closing if (isSocketWaiting() || isSocketReading()) { state = QHttpNetworkConnectionChannel::ReadingState; if (reply) receiveReply(); } else if (state == QHttpNetworkConnectionChannel::IdleState && resendCurrent) { // re-sending request because the socket was in ClosingState QMetaObject::invokeMethod(connection, "_q_startNextRequest", Qt::QueuedConnection); } state = QHttpNetworkConnectionChannel::IdleState; requeueCurrentlyPipelinedRequests(); close(); } void QHttpNetworkConnectionChannel::_q_connected() { // improve performance since we get the request sent by the kernel ASAP socket->setSocketOption(QAbstractSocket::LowDelayOption, 1); pipeliningSupported = QHttpNetworkConnectionChannel::PipeliningSupportUnknown; // ### FIXME: if the server closes the connection unexpectedly, we shouldn't send the same broken request again! //channels[i].reconnectAttempts = 2; if (!pendingEncrypt) { state = QHttpNetworkConnectionChannel::IdleState; if (reply) sendRequest(); else close(); } } void QHttpNetworkConnectionChannel::_q_error(QAbstractSocket::SocketError socketError) { if (!socket) return; bool send2Reply = false; QNetworkReply::NetworkError errorCode = QNetworkReply::UnknownNetworkError; switch (socketError) { case QAbstractSocket::HostNotFoundError: errorCode = QNetworkReply::HostNotFoundError; break; case QAbstractSocket::ConnectionRefusedError: errorCode = QNetworkReply::ConnectionRefusedError; break; case QAbstractSocket::RemoteHostClosedError: // try to reconnect/resend before sending an error. // while "Reading" the _q_disconnected() will handle this. if (state != QHttpNetworkConnectionChannel::IdleState && state != QHttpNetworkConnectionChannel::ReadingState) { if (reconnectAttempts-- > 0) { closeAndResendCurrentRequest(); return; } else { send2Reply = true; errorCode = QNetworkReply::RemoteHostClosedError; } } else { return; } break; case QAbstractSocket::SocketTimeoutError: // try to reconnect/resend before sending an error. if (state == QHttpNetworkConnectionChannel::WritingState && (reconnectAttempts-- > 0)) { closeAndResendCurrentRequest(); return; } send2Reply = true; errorCode = QNetworkReply::TimeoutError; break; case QAbstractSocket::ProxyAuthenticationRequiredError: errorCode = QNetworkReply::ProxyAuthenticationRequiredError; break; case QAbstractSocket::SslHandshakeFailedError: errorCode = QNetworkReply::SslHandshakeFailedError; break; default: // all other errors are treated as NetworkError errorCode = QNetworkReply::UnknownNetworkError; break; } QPointer that = connection; QString errorString = connection->d_func()->errorDetail(errorCode, socket); if (send2Reply) { if (reply) { reply->d_func()->errorString = errorString; // this error matters only to this reply emit reply->finishedWithError(errorCode, errorString); } // send the next request QMetaObject::invokeMethod(that, "_q_startNextRequest", Qt::QueuedConnection); } else { // the failure affects all requests. emit connection->error(errorCode, errorString); } if (that) //signal emission triggered event loop close(); } #ifndef QT_NO_NETWORKPROXY void QHttpNetworkConnectionChannel::_q_proxyAuthenticationRequired(const QNetworkProxy &proxy, QAuthenticator* auth) { connection->d_func()->emitProxyAuthenticationRequired(this, proxy, auth); } #endif void QHttpNetworkConnectionChannel::_q_uploadDataReadyRead() { sendRequest(); } #ifndef QT_NO_OPENSSL void QHttpNetworkConnectionChannel::_q_encrypted() { if (!socket) return; // ### error state = QHttpNetworkConnectionChannel::IdleState; sendRequest(); } void QHttpNetworkConnectionChannel::_q_sslErrors(const QList &errors) { if (!socket) return; //QNetworkReply::NetworkError errorCode = QNetworkReply::ProtocolFailure; emit connection->sslErrors(errors); } void QHttpNetworkConnectionChannel::_q_encryptedBytesWritten(qint64 bytes) { Q_UNUSED(bytes); // bytes have been written to the socket. write even more of them :) if (isSocketWriting()) sendRequest(); // otherwise we do nothing } #endif QT_END_NAMESPACE #include "moc_qhttpnetworkconnectionchannel_p.cpp" #endif // QT_NO_HTTP