/**************************************************************************** ** ** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies). ** All rights reserved. ** Contact: Nokia Corporation (qt-info@nokia.com) ** ** This file is part of the QtNetwork module of the Qt Toolkit. ** ** $QT_BEGIN_LICENSE:LGPL$ ** No Commercial Usage ** This file contains pre-release code and may not be distributed. ** You may use this file in accordance with the terms and conditions ** contained in the Technology Preview License Agreement accompanying ** this package. ** ** GNU Lesser General Public License Usage ** Alternatively, this file may be used under the terms of the GNU Lesser ** General Public License version 2.1 as published by the Free Software ** Foundation and appearing in the file LICENSE.LGPL included in the ** packaging of this file. Please review the following information to ** ensure the GNU Lesser General Public License version 2.1 requirements ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. ** ** In addition, as a special exception, Nokia gives you certain additional ** rights. These rights are described in the Nokia Qt LGPL Exception ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package. ** ** If you have questions regarding the use of this file, please contact ** Nokia at qt-info@nokia.com. ** ** ** ** ** ** ** ** ** $QT_END_LICENSE$ ** ****************************************************************************/ #include "qnetworkaccessmanager.h" #include "qnetworkaccessmanager_p.h" #include "qnetworkrequest.h" #include "qnetworkreply.h" #include "qnetworkreply_p.h" #include "qnetworkcookie.h" #include "qabstractnetworkcache.h" #include "QtNetwork/qnetworksession.h" #include "qnetworkaccesshttpbackend_p.h" #include "qnetworkaccessftpbackend_p.h" #include "qnetworkaccessfilebackend_p.h" #include "qnetworkaccessdatabackend_p.h" #include "qnetworkaccessdebugpipebackend_p.h" #include "qnetworkreplyfileimpl_p.h" #include "QtCore/qbuffer.h" #include "QtCore/qurl.h" #include "QtCore/qvector.h" #include "QtNetwork/qauthenticator.h" #include "QtNetwork/qsslconfiguration.h" #include "QtNetwork/qnetworkconfigmanager.h" QT_BEGIN_NAMESPACE #ifndef QT_NO_HTTP Q_GLOBAL_STATIC(QNetworkAccessHttpBackendFactory, httpBackend) #endif // QT_NO_HTTP Q_GLOBAL_STATIC(QNetworkAccessFileBackendFactory, fileBackend) Q_GLOBAL_STATIC(QNetworkAccessDataBackendFactory, dataBackend) #ifndef QT_NO_FTP Q_GLOBAL_STATIC(QNetworkAccessFtpBackendFactory, ftpBackend) #endif // QT_NO_FTP #ifdef QT_BUILD_INTERNAL Q_GLOBAL_STATIC(QNetworkAccessDebugPipeBackendFactory, debugpipeBackend) #endif static void ensureInitialized() { #ifndef QT_NO_HTTP (void) httpBackend(); #endif // QT_NO_HTTP (void) dataBackend(); #ifndef QT_NO_FTP (void) ftpBackend(); #endif #ifdef QT_BUILD_INTERNAL (void) debugpipeBackend(); #endif // leave this one last since it will query the special QAbstractFileEngines (void) fileBackend(); } /*! \class QNetworkAccessManager \brief The QNetworkAccessManager class allows the application to send network requests and receive replies \since 4.4 \ingroup network \inmodule QtNetwork \reentrant The Network Access API is constructed around one QNetworkAccessManager object, which holds the common configuration and settings for the requests it sends. It contains the proxy and cache configuration, as well as the signals related to such issues, and reply signals that can be used to monitor the progress of a network operation. One QNetworkAccessManager should be enough for the whole Qt application. Once a QNetworkAccessManager object has been created, the application can use it to send requests over the network. A group of standard functions are supplied that take a request and optional data, and each return a QNetworkReply object. The returned object is used to obtain any data returned in response to the corresponding request. A simple download off the network could be accomplished with: \snippet doc/src/snippets/code/src_network_access_qnetworkaccessmanager.cpp 0 QNetworkAccessManager has an asynchronous API. When the \tt replyFinished slot above is called, the parameter it takes is the QNetworkReply object containing the downloaded data as well as meta-data (headers, etc.). \note After the request has finished, it is the responsibility of the user to delete the QNetworkReply object at an appropriate time. Do not directly delete it inside the slot connected to finished(). You can use the deleteLater() function. \note QNetworkAccessManager queues the requests it receives. The number of requests executed in parallel is dependent on the protocol. Currently, for the HTTP protocol on desktop platforms, 6 requests are executed in parallel for one host/port combination. A more involved example, assuming the manager is already existent, can be: \snippet doc/src/snippets/code/src_network_access_qnetworkaccessmanager.cpp 1 \section1 Network and Roaming support With the addition of the \l {Bearer Management} API to Qt 4.7 QNetworkAccessManager gained the ability to manage network connections. QNetworkAccessManager can start the network interface if the device is offline and terminates the interface if the current process is the last one to use the uplink. Note that some platform utilize grace periods from when the last application stops using a uplink until the system actually terminates the connectivity link. Roaming is equally transparent. Any queued/pending network requests are automatically transferred to new access point. Clients wanting to utilize this feature should not require any changes. In fact it is likely that existing platform specific connection code can simply be removed from the application. \note The network and roaming support in QNetworkAccessManager is conditional upon the platform supporting connection management. The \l QNetworkConfigurationManager::NetworkSessionRequired can be used to detect whether QNetworkAccessManager utilizes this feature. Currently only Meego/Harmattan and Symbian platforms provide connection management support. \note This feature cannot be used in combination with the Bearer Management API as provided by QtMobility. Applications have to migrate to the Qt version of Bearer Management. \section1 Symbian Platform Security Requirements On Symbian, processes which use this class must have the \c NetworkServices platform security capability. If the client process lacks this capability, operations will result in a panic. Platform security capabilities are added via the \l{qmake-variable-reference.html#target-capability}{TARGET.CAPABILITY} qmake variable. \sa QNetworkRequest, QNetworkReply, QNetworkProxy */ /*! \enum QNetworkAccessManager::Operation Indicates the operation this reply is processing. \value HeadOperation retrieve headers operation (created with head()) \value GetOperation retrieve headers and download contents (created with get()) \value PutOperation upload contents operation (created with put()) \value PostOperation send the contents of an HTML form for processing via HTTP POST (created with post()) \value DeleteOperation delete contents operation (created with deleteResource()) \value CustomOperation custom operation (created with sendCustomRequest()) \since 4.7 \omitvalue UnknownOperation \sa QNetworkReply::operation() */ /*! \enum QNetworkAccessManager::NetworkAccessibility Indicates whether the network is accessible via this network access manager. \value UnknownAccessibility The network accessibility cannot be determined. \value NotAccessible The network is not currently accessible, either because there is currently no network coverage or network access has been explicitly disabled by a call to setNetworkAccessible(). \value Accessible The network is accessible. \sa networkAccessible */ /*! \property QNetworkAccessManager::networkAccessible \brief whether the network is currently accessible via this network access manager. \since 4.7 If the network is \l {NotAccessible}{not accessible} the network access manager will not process any new network requests, all such requests will fail with an error. Requests with URLs with the file:// scheme will still be processed. By default the value of this property reflects the physical state of the device. Applications may override it to disable all network requests via this network access manager by calling \snippet doc/src/snippets/code/src_network_access_qnetworkaccessmanager.cpp 4 Network requests can be reenabled again by calling \snippet doc/src/snippets/code/src_network_access_qnetworkaccessmanager.cpp 5 \note Calling setNetworkAccessible() does not change the network state. */ /*! \fn void QNetworkAccessManager::networkAccessibleChanged(QNetworkAccessManager::NetworkAccessibility accessible) This signal is emitted when the value of the \l networkAccessible property changes. \a accessible is the new network accessibility. */ /*! \fn void QNetworkAccessManager::networkSessionConnected() \since 4.7 \internal This signal is emitted when the status of the network session changes into a usable (Connected) state. It is used to signal to QNetworkReplys to start or migrate their network operation once the network session has been opened or finished roaming. */ /*! \fn void QNetworkAccessManager::proxyAuthenticationRequired(const QNetworkProxy &proxy, QAuthenticator *authenticator) This signal is emitted whenever a proxy requests authentication and QNetworkAccessManager cannot find a valid, cached credential. The slot connected to this signal should fill in the credentials for the proxy \a proxy in the \a authenticator object. QNetworkAccessManager will cache the credentials internally. The next time the proxy requests authentication, QNetworkAccessManager will automatically send the same credential without emitting the proxyAuthenticationRequired signal again. If the proxy rejects the credentials, QNetworkAccessManager will emit the signal again. \sa proxy(), setProxy(), authenticationRequired() */ /*! \fn void QNetworkAccessManager::authenticationRequired(QNetworkReply *reply, QAuthenticator *authenticator) This signal is emitted whenever a final server requests authentication before it delivers the requested contents. The slot connected to this signal should fill the credentials for the contents (which can be determined by inspecting the \a reply object) in the \a authenticator object. QNetworkAccessManager will cache the credentials internally and will send the same values if the server requires authentication again, without emitting the authenticationRequired() signal. If it rejects the credentials, this signal will be emitted again. \sa proxyAuthenticationRequired() */ /*! \fn void QNetworkAccessManager::finished(QNetworkReply *reply) This signal is emitted whenever a pending network reply is finished. The \a reply parameter will contain a pointer to the reply that has just finished. This signal is emitted in tandem with the QNetworkReply::finished() signal. See QNetworkReply::finished() for information on the status that the object will be in. \note Do not delete the \a reply object in the slot connected to this signal. Use deleteLater(). \sa QNetworkReply::finished(), QNetworkReply::error() */ /*! \fn void QNetworkAccessManager::sslErrors(QNetworkReply *reply, const QList &errors) This signal is emitted if the SSL/TLS session encountered errors during the set up, including certificate verification errors. The \a errors parameter contains the list of errors and \a reply is the QNetworkReply that is encountering these errors. To indicate that the errors are not fatal and that the connection should proceed, the QNetworkReply::ignoreSslErrors() function should be called from the slot connected to this signal. If it is not called, the SSL session will be torn down before any data is exchanged (including the URL). This signal can be used to display an error message to the user indicating that security may be compromised and display the SSL settings (see sslConfiguration() to obtain it). If the user decides to proceed after analyzing the remote certificate, the slot should call ignoreSslErrors(). \sa QSslSocket::sslErrors(), QNetworkReply::sslErrors(), QNetworkReply::sslConfiguration(), QNetworkReply::ignoreSslErrors() */ class QNetworkAuthenticationCredential { public: QString domain; QString user; QString password; }; Q_DECLARE_TYPEINFO(QNetworkAuthenticationCredential, Q_MOVABLE_TYPE); inline bool operator<(const QNetworkAuthenticationCredential &t1, const QString &t2) { return t1.domain < t2; } class QNetworkAuthenticationCache: private QVector, public QNetworkAccessCache::CacheableObject { public: QNetworkAuthenticationCache() { setExpires(false); setShareable(true); reserve(1); } QNetworkAuthenticationCredential *findClosestMatch(const QString &domain) { iterator it = qLowerBound(begin(), end(), domain); if (it == end() && !isEmpty()) --it; if (it == end() || !domain.startsWith(it->domain)) return 0; return &*it; } void insert(const QString &domain, const QString &user, const QString &password) { QNetworkAuthenticationCredential *closestMatch = findClosestMatch(domain); if (closestMatch && closestMatch->domain == domain) { // we're overriding the current credentials closestMatch->user = user; closestMatch->password = password; } else { QNetworkAuthenticationCredential newCredential; newCredential.domain = domain; newCredential.user = user; newCredential.password = password; if (closestMatch) QVector::insert(++closestMatch, newCredential); else QVector::insert(end(), newCredential); } } virtual void dispose() { delete this; } }; #ifndef QT_NO_NETWORKPROXY static QByteArray proxyAuthenticationKey(const QNetworkProxy &proxy, const QString &realm) { QUrl key; switch (proxy.type()) { case QNetworkProxy::Socks5Proxy: key.setScheme(QLatin1String("proxy-socks5")); break; case QNetworkProxy::HttpProxy: case QNetworkProxy::HttpCachingProxy: key.setScheme(QLatin1String("proxy-http")); break; case QNetworkProxy::FtpCachingProxy: key.setScheme(QLatin1String("proxy-ftp")); break; case QNetworkProxy::DefaultProxy: case QNetworkProxy::NoProxy: // shouldn't happen return QByteArray(); // no default: // let there be errors if a new proxy type is added in the future } if (key.scheme().isEmpty()) // proxy type not handled return QByteArray(); key.setUserName(proxy.user()); key.setHost(proxy.hostName()); key.setPort(proxy.port()); key.setFragment(realm); return "auth:" + key.toEncoded(); } #endif static inline QByteArray authenticationKey(const QUrl &url, const QString &realm) { QUrl copy = url; copy.setFragment(realm); return "auth:" + copy.toEncoded(QUrl::RemovePassword | QUrl::RemovePath | QUrl::RemoveQuery); } /*! Constructs a QNetworkAccessManager object that is the center of the Network Access API and sets \a parent as the parent object. */ QNetworkAccessManager::QNetworkAccessManager(QObject *parent) : QObject(*new QNetworkAccessManagerPrivate, parent) { ensureInitialized(); qRegisterMetaType("QNetworkReply::NetworkError"); } /*! Destroys the QNetworkAccessManager object and frees up any resources. Note that QNetworkReply objects that are returned from this class have this object set as their parents, which means that they will be deleted along with it if you don't call QObject::setParent() on them. */ QNetworkAccessManager::~QNetworkAccessManager() { #ifndef QT_NO_NETWORKPROXY delete d_func()->proxyFactory; #endif // Delete the QNetworkReply children first. // Else a QAbstractNetworkCache might get deleted in ~QObject // before a QNetworkReply that accesses the QAbstractNetworkCache // object in its destructor. qDeleteAll(findChildren()); // The other children will be deleted in this ~QObject // FIXME instead of this "hack" make the QNetworkReplyImpl // properly watch the cache deletion, e.g. via a QWeakPointer. } #ifndef QT_NO_NETWORKPROXY /*! Returns the QNetworkProxy that the requests sent using this QNetworkAccessManager object will use. The default value for the proxy is QNetworkProxy::DefaultProxy. \sa setProxy(), setProxyFactory(), proxyAuthenticationRequired() */ QNetworkProxy QNetworkAccessManager::proxy() const { return d_func()->proxy; } /*! Sets the proxy to be used in future requests to be \a proxy. This does not affect requests that have already been sent. The proxyAuthenticationRequired() signal will be emitted if the proxy requests authentication. A proxy set with this function will be used for all requests issued by QNetworkAccessManager. In some cases, it might be necessary to select different proxies depending on the type of request being sent or the destination host. If that's the case, you should consider using setProxyFactory(). \sa proxy(), proxyAuthenticationRequired() */ void QNetworkAccessManager::setProxy(const QNetworkProxy &proxy) { Q_D(QNetworkAccessManager); delete d->proxyFactory; d->proxy = proxy; d->proxyFactory = 0; } /*! \fn QNetworkProxyFactory *QNetworkAccessManager::proxyFactory() const \since 4.5 Returns the proxy factory that this QNetworkAccessManager object is using to determine the proxies to be used for requests. Note that the pointer returned by this function is managed by QNetworkAccessManager and could be deleted at any time. \sa setProxyFactory(), proxy() */ QNetworkProxyFactory *QNetworkAccessManager::proxyFactory() const { return d_func()->proxyFactory; } /*! \since 4.5 Sets the proxy factory for this class to be \a factory. A proxy factory is used to determine a more specific list of proxies to be used for a given request, instead of trying to use the same proxy value for all requests. All queries sent by QNetworkAccessManager will have type QNetworkProxyQuery::UrlRequest. For example, a proxy factory could apply the following rules: \list \o if the target address is in the local network (for example, if the hostname contains no dots or if it's an IP address in the organization's range), return QNetworkProxy::NoProxy \o if the request is FTP, return an FTP proxy \o if the request is HTTP or HTTPS, then return an HTTP proxy \o otherwise, return a SOCKSv5 proxy server \endlist The lifetime of the object \a factory will be managed by QNetworkAccessManager. It will delete the object when necessary. \note If a specific proxy is set with setProxy(), the factory will not be used. \sa proxyFactory(), setProxy(), QNetworkProxyQuery */ void QNetworkAccessManager::setProxyFactory(QNetworkProxyFactory *factory) { Q_D(QNetworkAccessManager); delete d->proxyFactory; d->proxyFactory = factory; d->proxy = QNetworkProxy(); } #endif /*! \since 4.5 Returns the cache that is used to store data obtained from the network. \sa setCache() */ QAbstractNetworkCache *QNetworkAccessManager::cache() const { Q_D(const QNetworkAccessManager); return d->networkCache; } /*! \since 4.5 Sets the manager's network cache to be the \a cache specified. The cache is used for all requests dispatched by the manager. Use this function to set the network cache object to a class that implements additional features, like saving the cookies to permanent storage. \note QNetworkAccessManager takes ownership of the \a cache object. QNetworkAccessManager by default does not have a set cache. Qt provides a simple disk cache, QNetworkDiskCache, which can be used. \sa cache(), QNetworkRequest::CacheLoadControl */ void QNetworkAccessManager::setCache(QAbstractNetworkCache *cache) { Q_D(QNetworkAccessManager); if (d->networkCache != cache) { delete d->networkCache; d->networkCache = cache; if (d->networkCache) d->networkCache->setParent(this); } } /*! Returns the QNetworkCookieJar that is used to store cookies obtained from the network as well as cookies that are about to be sent. \sa setCookieJar() */ QNetworkCookieJar *QNetworkAccessManager::cookieJar() const { Q_D(const QNetworkAccessManager); if (!d->cookieJar) d->createCookieJar(); return d->cookieJar; } /*! Sets the manager's cookie jar to be the \a cookieJar specified. The cookie jar is used by all requests dispatched by the manager. Use this function to set the cookie jar object to a class that implements additional features, like saving the cookies to permanent storage. \note QNetworkAccessManager takes ownership of the \a cookieJar object. If \a cookieJar is in the same thread as this QNetworkAccessManager, it will set the parent of the \a cookieJar so that the cookie jar is deleted when this object is deleted as well. If you want to share cookie jars between different QNetworkAccessManager objects, you may want to set the cookie jar's parent to 0 after calling this function. QNetworkAccessManager by default does not implement any cookie policy of its own: it accepts all cookies sent by the server, as long as they are well formed and meet the minimum security requirements (cookie domain matches the request's and cookie path matches the request's). In order to implement your own security policy, override the QNetworkCookieJar::cookiesForUrl() and QNetworkCookieJar::setCookiesFromUrl() virtual functions. Those functions are called by QNetworkAccessManager when it detects a new cookie. \sa cookieJar(), QNetworkCookieJar::cookiesForUrl(), QNetworkCookieJar::setCookiesFromUrl() */ void QNetworkAccessManager::setCookieJar(QNetworkCookieJar *cookieJar) { Q_D(QNetworkAccessManager); d->cookieJarCreated = true; if (d->cookieJar != cookieJar) { if (d->cookieJar && d->cookieJar->parent() == this) delete d->cookieJar; d->cookieJar = cookieJar; if (thread() == cookieJar->thread()) d->cookieJar->setParent(this); } } /*! Posts a request to obtain the network headers for \a request and returns a new QNetworkReply object which will contain such headers. The function is named after the HTTP request associated (HEAD). */ QNetworkReply *QNetworkAccessManager::head(const QNetworkRequest &request) { return d_func()->postProcess(createRequest(QNetworkAccessManager::HeadOperation, request)); } /*! Posts a request to obtain the contents of the target \a request and returns a new QNetworkReply object opened for reading which emits the \l{QIODevice::readyRead()}{readyRead()} signal whenever new data arrives. The contents as well as associated headers will be downloaded. \sa post(), put(), deleteResource(), sendCustomRequest() */ QNetworkReply *QNetworkAccessManager::get(const QNetworkRequest &request) { return d_func()->postProcess(createRequest(QNetworkAccessManager::GetOperation, request)); } /*! Sends an HTTP POST request to the destination specified by \a request and returns a new QNetworkReply object opened for reading that will contain the reply sent by the server. The contents of the \a data device will be uploaded to the server. \a data must be open for reading and must remain valid until the finished() signal is emitted for this reply. \note Sending a POST request on protocols other than HTTP and HTTPS is undefined and will probably fail. \sa get(), put(), deleteResource(), sendCustomRequest() */ QNetworkReply *QNetworkAccessManager::post(const QNetworkRequest &request, QIODevice *data) { return d_func()->postProcess(createRequest(QNetworkAccessManager::PostOperation, request, data)); } /*! \overload Sends the contents of the \a data byte array to the destination specified by \a request. */ QNetworkReply *QNetworkAccessManager::post(const QNetworkRequest &request, const QByteArray &data) { QBuffer *buffer = new QBuffer; buffer->setData(data); buffer->open(QIODevice::ReadOnly); QNetworkReply *reply = post(request, buffer); buffer->setParent(reply); return reply; } /*! Uploads the contents of \a data to the destination \a request and returnes a new QNetworkReply object that will be open for reply. \a data must be opened for reading when this function is called and must remain valid until the finished() signal is emitted for this reply. Whether anything will be available for reading from the returned object is protocol dependent. For HTTP, the server may send a small HTML page indicating the upload was successful (or not). Other protocols will probably have content in their replies. \note For HTTP, this request will send a PUT request, which most servers do not allow. Form upload mechanisms, including that of uploading files through HTML forms, use the POST mechanism. \sa get(), post(), deleteResource(), sendCustomRequest() */ QNetworkReply *QNetworkAccessManager::put(const QNetworkRequest &request, QIODevice *data) { return d_func()->postProcess(createRequest(QNetworkAccessManager::PutOperation, request, data)); } /*! \overload Sends the contents of the \a data byte array to the destination specified by \a request. */ QNetworkReply *QNetworkAccessManager::put(const QNetworkRequest &request, const QByteArray &data) { QBuffer *buffer = new QBuffer; buffer->setData(data); buffer->open(QIODevice::ReadOnly); QNetworkReply *reply = put(request, buffer); buffer->setParent(reply); return reply; } /*! \since 4.6 Sends a request to delete the resource identified by the URL of \a request. \note This feature is currently available for HTTP only, performing an HTTP DELETE request. \sa get(), post(), put(), sendCustomRequest() */ QNetworkReply *QNetworkAccessManager::deleteResource(const QNetworkRequest &request) { return d_func()->postProcess(createRequest(QNetworkAccessManager::DeleteOperation, request)); } #ifndef QT_NO_BEARERMANAGEMENT /*! \since 4.7 Sets the network configuration that will be used when creating the \l {QNetworkSession}{network session} to \a config. The network configuration is used to create and open a network session before any request that requires network access is process. If no network configuration is explicitly set via this function the network configuration returned by QNetworkConfigurationManager::defaultConfiguration() will be used. To restore the default network configuration set the network configuration to the value returned from QNetworkConfigurationManager::defaultConfiguration(). \snippet doc/src/snippets/code/src_network_access_qnetworkaccessmanager.cpp 2 If an invalid network configuration is set, a network session will not be created. In this case network requests will be processed regardless, but may fail. For example: \snippet doc/src/snippets/code/src_network_access_qnetworkaccessmanager.cpp 3 \sa configuration(), QNetworkSession */ void QNetworkAccessManager::setConfiguration(const QNetworkConfiguration &config) { d_func()->createSession(config); } /*! \since 4.7 Returns the network configuration that will be used to create the \l {QNetworkSession}{network session} which will be used when processing network requests. \sa setConfiguration(), activeConfiguration() */ QNetworkConfiguration QNetworkAccessManager::configuration() const { Q_D(const QNetworkAccessManager); if (d->networkSession) return d->networkSession->configuration(); else return QNetworkConfiguration(); } /*! \since 4.7 Returns the current active network configuration. If the network configuration returned by configuration() is of type QNetworkConfiguration::ServiceNetwork this function will return the current active child network configuration of that configuration. Otherwise returns the same network configuration as configuration(). Use this function to return the actual network configuration currently in use by the network session. \sa configuration() */ QNetworkConfiguration QNetworkAccessManager::activeConfiguration() const { Q_D(const QNetworkAccessManager); if (d->networkSession) { QNetworkConfigurationManager manager; return manager.configurationFromIdentifier( d->networkSession->sessionProperty(QLatin1String("ActiveConfiguration")).toString()); } else { return QNetworkConfiguration(); } } /*! \since 4.7 Overrides the reported network accessibility. If \a accessible is NotAccessible the reported network accessiblity will always be NotAccessible. Otherwise the reported network accessibility will reflect the actual device state. */ void QNetworkAccessManager::setNetworkAccessible(QNetworkAccessManager::NetworkAccessibility accessible) { Q_D(QNetworkAccessManager); if (d->networkAccessible != accessible) { NetworkAccessibility previous = networkAccessible(); d->networkAccessible = accessible; NetworkAccessibility current = networkAccessible(); if (previous != current) emit networkAccessibleChanged(current); } } /*! \since 4.7 Returns the current network accessibility. */ QNetworkAccessManager::NetworkAccessibility QNetworkAccessManager::networkAccessible() const { Q_D(const QNetworkAccessManager); if (d->networkSession) { // d->online holds online/offline state of this network session. if (d->online) return d->networkAccessible; else return NotAccessible; } else { // Network accessibility is either disabled or unknown. return (d->networkAccessible == NotAccessible) ? NotAccessible : UnknownAccessibility; } } #endif // QT_NO_BEARERMANAGEMENT /*! \since 4.7 Sends a custom request to the server identified by the URL of \a request. It is the user's responsibility to send a \a verb to the server that is valid according to the HTTP specification. This method provides means to send verbs other than the common ones provided via get() or post() etc., for instance sending an HTTP OPTIONS command. If \a data is not empty, the contents of the \a data device will be uploaded to the server; in that case, data must be open for reading and must remain valid until the finished() signal is emitted for this reply. \note This feature is currently available for HTTP only. \sa get(), post(), put(), deleteResource() */ QNetworkReply *QNetworkAccessManager::sendCustomRequest(const QNetworkRequest &request, const QByteArray &verb, QIODevice *data) { QNetworkRequest newRequest(request); newRequest.setAttribute(QNetworkRequest::CustomVerbAttribute, verb); return d_func()->postProcess(createRequest(QNetworkAccessManager::CustomOperation, newRequest, data)); } /*! Returns a new QNetworkReply object to handle the operation \a op and request \a req. The device \a outgoingData is always 0 for Get and Head requests, but is the value passed to post() and put() in those operations (the QByteArray variants will pass a QBuffer object). The default implementation calls QNetworkCookieJar::cookiesForUrl() on the cookie jar set with setCookieJar() to obtain the cookies to be sent to the remote server. The returned object must be in an open state. */ QNetworkReply *QNetworkAccessManager::createRequest(QNetworkAccessManager::Operation op, const QNetworkRequest &req, QIODevice *outgoingData) { Q_D(QNetworkAccessManager); bool isLocalFile = req.url().isLocalFile(); // fast path for GET on file:// URLs // The QNetworkAccessFileBackend will right now only be used for PUT if ((op == QNetworkAccessManager::GetOperation || op == QNetworkAccessManager::HeadOperation) && (isLocalFile || req.url().scheme() == QLatin1String("qrc"))) { return new QNetworkReplyFileImpl(this, req, op); } #ifndef QT_NO_BEARERMANAGEMENT // Return a disabled network reply if network access is disabled. // Except if the scheme is empty or file://. if (!d->networkAccessible && !isLocalFile) { return new QDisabledNetworkReply(this, req, op); } if (!d->networkSession && (d->initializeSession || !d->networkConfiguration.isEmpty())) { QNetworkConfigurationManager manager; if (!d->networkConfiguration.isEmpty()) { d->createSession(manager.configurationFromIdentifier(d->networkConfiguration)); } else { if (manager.capabilities() & QNetworkConfigurationManager::NetworkSessionRequired) d->createSession(manager.defaultConfiguration()); else d->initializeSession = false; } } if (d->networkSession) d->networkSession->setSessionProperty(QLatin1String("AutoCloseSessionTimeout"), -1); #endif QNetworkRequest request = req; if (!request.header(QNetworkRequest::ContentLengthHeader).isValid() && outgoingData && !outgoingData->isSequential()) { // request has no Content-Length // but the data that is outgoing is random-access request.setHeader(QNetworkRequest::ContentLengthHeader, outgoingData->size()); } if (static_cast (request.attribute(QNetworkRequest::CookieLoadControlAttribute, QNetworkRequest::Automatic).toInt()) == QNetworkRequest::Automatic) { if (d->cookieJar) { QList cookies = d->cookieJar->cookiesForUrl(request.url()); if (!cookies.isEmpty()) request.setHeader(QNetworkRequest::CookieHeader, QVariant::fromValue(cookies)); } } // first step: create the reply QUrl url = request.url(); QNetworkReplyImpl *reply = new QNetworkReplyImpl(this); #ifndef QT_NO_BEARERMANAGEMENT if (!isLocalFile) { connect(this, SIGNAL(networkSessionConnected()), reply, SLOT(_q_networkSessionConnected())); } #endif QNetworkReplyImplPrivate *priv = reply->d_func(); priv->manager = this; // second step: fetch cached credentials if (static_cast (request.attribute(QNetworkRequest::AuthenticationReuseAttribute, QNetworkRequest::Automatic).toInt()) == QNetworkRequest::Automatic) { QNetworkAuthenticationCredential *cred = d->fetchCachedCredentials(url); if (cred) { url.setUserName(cred->user); url.setPassword(cred->password); priv->urlForLastAuthentication = url; } } // third step: find a backend priv->backend = d->findBackend(op, request); #ifndef QT_NO_NETWORKPROXY QList proxyList = d->queryProxy(QNetworkProxyQuery(request.url())); priv->proxyList = proxyList; #endif if (priv->backend) { priv->backend->setParent(reply); priv->backend->reply = priv; } // fourth step: setup the reply priv->setup(op, request, outgoingData); #ifndef QT_NO_OPENSSL reply->setSslConfiguration(request.sslConfiguration()); #endif return reply; } void QNetworkAccessManagerPrivate::_q_replyFinished() { Q_Q(QNetworkAccessManager); QNetworkReply *reply = qobject_cast(q->sender()); if (reply) emit q->finished(reply); #ifndef QT_NO_BEARERMANAGEMENT if (networkSession && q->findChildren().count() == 1) networkSession->setSessionProperty(QLatin1String("AutoCloseSessionTimeout"), 120000); #endif } void QNetworkAccessManagerPrivate::_q_replySslErrors(const QList &errors) { #ifndef QT_NO_OPENSSL Q_Q(QNetworkAccessManager); QNetworkReply *reply = qobject_cast(q->sender()); if (reply) emit q->sslErrors(reply, errors); #else Q_UNUSED(errors); #endif } QNetworkReply *QNetworkAccessManagerPrivate::postProcess(QNetworkReply *reply) { Q_Q(QNetworkAccessManager); QNetworkReplyPrivate::setManager(reply, q); q->connect(reply, SIGNAL(finished()), SLOT(_q_replyFinished())); #ifndef QT_NO_OPENSSL /* In case we're compiled without SSL support, we don't have this signal and we need to * avoid getting a connection error. */ q->connect(reply, SIGNAL(sslErrors(QList)), SLOT(_q_replySslErrors(QList))); #endif return reply; } void QNetworkAccessManagerPrivate::createCookieJar() const { if (!cookieJarCreated) { // keep the ugly hack in here QNetworkAccessManagerPrivate *that = const_cast(this); that->cookieJar = new QNetworkCookieJar(that->q_func()); that->cookieJarCreated = true; } } void QNetworkAccessManagerPrivate::authenticationRequired(QNetworkAccessBackend *backend, QAuthenticator *authenticator) { Q_Q(QNetworkAccessManager); // FIXME: Add support for domains (i.e., the leading path) QUrl url = backend->reply->url; // don't try the cache for the same URL twice in a row // being called twice for the same URL means the authentication failed if (url != backend->reply->urlForLastAuthentication) { QNetworkAuthenticationCredential *cred = fetchCachedCredentials(url, authenticator); if (cred) { authenticator->setUser(cred->user); authenticator->setPassword(cred->password); backend->reply->urlForLastAuthentication = url; return; } } backend->reply->urlForLastAuthentication = url; emit q->authenticationRequired(backend->reply->q_func(), authenticator); addCredentials(url, authenticator); } #ifndef QT_NO_NETWORKPROXY void QNetworkAccessManagerPrivate::proxyAuthenticationRequired(QNetworkAccessBackend *backend, const QNetworkProxy &proxy, QAuthenticator *authenticator) { Q_Q(QNetworkAccessManager); // ### FIXME Tracking of successful authentications // This code is a bit broken right now for SOCKS authentication // first request: proxyAuthenticationRequired gets emitted, credentials gets saved // second request: (proxy != backend->reply->lastProxyAuthentication) does not evaluate to true, // proxyAuthenticationRequired gets emitted again // possible solution: some tracking inside the authenticator // or a new function proxyAuthenticationSucceeded(true|false) if (proxy != backend->reply->lastProxyAuthentication) { QNetworkAuthenticationCredential *cred = fetchCachedCredentials(proxy); if (cred) { authenticator->setUser(cred->user); authenticator->setPassword(cred->password); return; } } backend->reply->lastProxyAuthentication = proxy; emit q->proxyAuthenticationRequired(proxy, authenticator); addCredentials(proxy, authenticator); } void QNetworkAccessManagerPrivate::addCredentials(const QNetworkProxy &p, const QAuthenticator *authenticator) { Q_ASSERT(authenticator); Q_ASSERT(p.type() != QNetworkProxy::DefaultProxy); Q_ASSERT(p.type() != QNetworkProxy::NoProxy); QString realm = authenticator->realm(); QNetworkProxy proxy = p; proxy.setUser(authenticator->user()); // Set two credentials: one with the username and one without do { // Set two credentials actually: one with and one without the realm do { QByteArray cacheKey = proxyAuthenticationKey(proxy, realm); if (cacheKey.isEmpty()) return; // should not happen QNetworkAuthenticationCache *auth = new QNetworkAuthenticationCache; auth->insert(QString(), authenticator->user(), authenticator->password()); objectCache.addEntry(cacheKey, auth); // replace the existing one, if there's any if (realm.isEmpty()) { break; } else { realm.clear(); } } while (true); if (proxy.user().isEmpty()) break; else proxy.setUser(QString()); } while (true); } QNetworkAuthenticationCredential * QNetworkAccessManagerPrivate::fetchCachedCredentials(const QNetworkProxy &p, const QAuthenticator *authenticator) { QNetworkProxy proxy = p; if (proxy.type() == QNetworkProxy::DefaultProxy) { proxy = QNetworkProxy::applicationProxy(); } if (!proxy.password().isEmpty()) return 0; // no need to set credentials if it already has them QString realm; if (authenticator) realm = authenticator->realm(); QByteArray cacheKey = proxyAuthenticationKey(proxy, realm); if (cacheKey.isEmpty()) return 0; if (!objectCache.hasEntry(cacheKey)) return 0; QNetworkAuthenticationCache *auth = static_cast(objectCache.requestEntryNow(cacheKey)); QNetworkAuthenticationCredential *cred = auth->findClosestMatch(QString()); objectCache.releaseEntry(cacheKey); // proxy cache credentials always have exactly one item Q_ASSERT_X(cred, "QNetworkAccessManager", "Internal inconsistency: found a cache key for a proxy, but it's empty"); return cred; } QList QNetworkAccessManagerPrivate::queryProxy(const QNetworkProxyQuery &query) { QList proxies; if (proxyFactory) { proxies = proxyFactory->queryProxy(query); if (proxies.isEmpty()) { qWarning("QNetworkAccessManager: factory %p has returned an empty result set", proxyFactory); proxies << QNetworkProxy::NoProxy; } } else if (proxy.type() == QNetworkProxy::DefaultProxy) { // no proxy set, query the application return QNetworkProxyFactory::proxyForQuery(query); } else { proxies << proxy; } return proxies; } #endif void QNetworkAccessManagerPrivate::addCredentials(const QUrl &url, const QAuthenticator *authenticator) { Q_ASSERT(authenticator); QString domain = QString::fromLatin1("/"); // FIXME: make QAuthenticator return the domain QString realm = authenticator->realm(); // Set two credentials actually: one with and one without the username in the URL QUrl copy = url; copy.setUserName(authenticator->user()); do { QByteArray cacheKey = authenticationKey(copy, realm); if (objectCache.hasEntry(cacheKey)) { QNetworkAuthenticationCache *auth = static_cast(objectCache.requestEntryNow(cacheKey)); auth->insert(domain, authenticator->user(), authenticator->password()); objectCache.releaseEntry(cacheKey); } else { QNetworkAuthenticationCache *auth = new QNetworkAuthenticationCache; auth->insert(domain, authenticator->user(), authenticator->password()); objectCache.addEntry(cacheKey, auth); } if (copy.userName().isEmpty()) { break; } else { copy.setUserName(QString()); } } while (true); } /*! Fetch the credential data from the credential cache. If auth is 0 (as it is when called from createRequest()), this will try to look up with an empty realm. That fails in most cases for HTTP (because the realm is seldom empty for HTTP challenges). In any case, QHttpNetworkConnection never sends the credentials on the first attempt: it needs to find out what authentication methods the server supports. For FTP, realm is always empty. */ QNetworkAuthenticationCredential * QNetworkAccessManagerPrivate::fetchCachedCredentials(const QUrl &url, const QAuthenticator *authentication) { if (!url.password().isEmpty()) return 0; // no need to set credentials if it already has them QString realm; if (authentication) realm = authentication->realm(); QByteArray cacheKey = authenticationKey(url, realm); if (!objectCache.hasEntry(cacheKey)) return 0; QNetworkAuthenticationCache *auth = static_cast(objectCache.requestEntryNow(cacheKey)); QNetworkAuthenticationCredential *cred = auth->findClosestMatch(url.path()); objectCache.releaseEntry(cacheKey); return cred; } void QNetworkAccessManagerPrivate::clearCache(QNetworkAccessManager *manager) { manager->d_func()->objectCache.clear(); } QNetworkAccessManagerPrivate::~QNetworkAccessManagerPrivate() { } #ifndef QT_NO_BEARERMANAGEMENT void QNetworkAccessManagerPrivate::createSession(const QNetworkConfiguration &config) { Q_Q(QNetworkAccessManager); initializeSession = false; if (networkSession) delete networkSession; if (!config.isValid()) { networkSession = 0; online = false; if (networkAccessible == QNetworkAccessManager::NotAccessible) emit q->networkAccessibleChanged(QNetworkAccessManager::NotAccessible); else emit q->networkAccessibleChanged(QNetworkAccessManager::UnknownAccessibility); return; } networkSession = new QNetworkSession(config, q); QObject::connect(networkSession, SIGNAL(opened()), q, SIGNAL(networkSessionConnected())); QObject::connect(networkSession, SIGNAL(closed()), q, SLOT(_q_networkSessionClosed())); QObject::connect(networkSession, SIGNAL(stateChanged(QNetworkSession::State)), q, SLOT(_q_networkSessionStateChanged(QNetworkSession::State))); QObject::connect(networkSession, SIGNAL(newConfigurationActivated()), q, SLOT(_q_networkSessionNewConfigurationActivated())); QObject::connect(networkSession, SIGNAL(preferredConfigurationChanged(QNetworkConfiguration,bool)), q, SLOT(_q_networkSessionPreferredConfigurationChanged(QNetworkConfiguration,bool))); _q_networkSessionStateChanged(networkSession->state()); } void QNetworkAccessManagerPrivate::_q_networkSessionClosed() { if (networkSession) { networkConfiguration = networkSession->configuration().identifier(); networkSession->deleteLater(); networkSession = 0; } } void QNetworkAccessManagerPrivate::_q_networkSessionNewConfigurationActivated() { Q_Q(QNetworkAccessManager); if (networkSession) { networkSession->accept(); emit q->networkSessionConnected(); } } void QNetworkAccessManagerPrivate::_q_networkSessionPreferredConfigurationChanged(const QNetworkConfiguration &, bool) { if (networkSession) networkSession->migrate(); } void QNetworkAccessManagerPrivate::_q_networkSessionStateChanged(QNetworkSession::State state) { Q_Q(QNetworkAccessManager); if (online) { if (state != QNetworkSession::Connected && state != QNetworkSession::Roaming) { online = false; emit q->networkAccessibleChanged(QNetworkAccessManager::NotAccessible); } } else { if (state == QNetworkSession::Connected || state == QNetworkSession::Roaming) { online = true; emit q->networkAccessibleChanged(networkAccessible); } } } #endif // QT_NO_BEARERMANAGEMENT QT_END_NAMESPACE #include "moc_qnetworkaccessmanager.cpp"