/**************************************************************************** ** ** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). ** All rights reserved. ** Contact: Nokia Corporation (qt-info@nokia.com) ** ** This file is part of the QtNetwork module of the Qt Toolkit. ** ** $QT_BEGIN_LICENSE:LGPL$ ** No Commercial Usage ** This file contains pre-release code and may not be distributed. ** You may use this file in accordance with the terms and conditions ** contained in the Technology Preview License Agreement accompanying ** this package. ** ** GNU Lesser General Public License Usage ** Alternatively, this file may be used under the terms of the GNU Lesser ** General Public License version 2.1 as published by the Free Software ** Foundation and appearing in the file LICENSE.LGPL included in the ** packaging of this file. Please review the following information to ** ensure the GNU Lesser General Public License version 2.1 requirements ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. ** ** In addition, as a special exception, Nokia gives you certain additional ** rights. These rights are described in the Nokia Qt LGPL Exception ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package. ** ** If you have questions regarding the use of this file, please contact ** Nokia at qt-info@nokia.com. ** ** ** ** ** ** ** ** ** $QT_END_LICENSE$ ** ****************************************************************************/ /*! \class QNetworkProxy \since 4.1 \brief The QNetworkProxy class provides a network layer proxy. \reentrant \ingroup network \inmodule QtNetwork QNetworkProxy provides the method for configuring network layer proxy support to the Qt network classes. The currently supported classes are QAbstractSocket, QTcpSocket, QUdpSocket, QTcpServer, QNetworkAccessManager and QFtp. The proxy support is designed to be as transparent as possible. This means that existing network-enabled applications that you have written should automatically support network proxy using the following code. \snippet doc/src/snippets/code/src_network_kernel_qnetworkproxy.cpp 0 An alternative to setting an application wide proxy is to specify the proxy for individual sockets using QAbstractSocket::setProxy() and QTcpServer::setProxy(). In this way, it is possible to disable the use of a proxy for specific sockets using the following code: \snippet doc/src/snippets/code/src_network_kernel_qnetworkproxy.cpp 1 Network proxy is not used if the address used in \l {QAbstractSocket::connectToHost()}{connectToHost()}, \l {QUdpSocket::bind()}{bind()} or \l {QTcpServer::listen()}{listen()} is equivalent to QHostAddress::LocalHost or QHostAddress::LocalHostIPv6. Each type of proxy support has certain restrictions associated with it. You should read the \l{ProxyType} documentation carefully before selecting a proxy type to use. \note Changes made to currently connected sockets do not take effect. If you need to change a connected socket, you should reconnect it. \section1 SOCKS5 The SOCKS5 support in Qt 4 is based on \l{RFC 1928} and \l{RFC 1929}. The supported authentication methods are no authentication and username/password authentication. Both IPv4 and IPv6 are supported. Domain names are resolved through the SOCKS5 server if the QNetworkProxy::HostNameLookupCapability is enabled, otherwise they are resolved locally and the IP address is sent to the server. There are several things to remember when using SOCKS5 with QUdpSocket and QTcpServer: With QUdpSocket, a call to \l {QUdpSocket::bind()}{bind()} may fail with a timeout error. If a port number other than 0 is passed to \l {QUdpSocket::bind()}{bind()}, it is not guaranteed that it is the specified port that will be used. Use \l{QUdpSocket::localPort()}{localPort()} and \l{QUdpSocket::localAddress()}{localAddress()} to get the actual address and port number in use. Because proxied UDP goes through two UDP connections, it is more likely that packets will be dropped. With QTcpServer a call to \l{QTcpServer::listen()}{listen()} may fail with a timeout error. If a port number other than 0 is passed to \l{QTcpServer::listen()}{listen()}, then it is not guaranteed that it is the specified port that will be used. Use \l{QTcpServer::serverPort()}{serverPort()} and \l{QTcpServer::serverAddress()}{serverAddress()} to get the actual address and port used to listen for connections. SOCKS5 only supports one accepted connection per call to \l{QTcpServer::listen()}{listen()}, and each call is likely to result in a different \l{QTcpServer::serverPort()}{serverPort()} being used. \sa QAbstractSocket, QTcpServer */ /*! \enum QNetworkProxy::ProxyType This enum describes the types of network proxying provided in Qt. There are two types of proxies that Qt understands: transparent proxies and caching proxies. The first group consists of proxies that can handle any arbitrary data transfer, while the second can only handle specific requests. The caching proxies only make sense for the specific classes where they can be used. \value NoProxy No proxying is used \value DefaultProxy Proxy is determined based on the application proxy set using setApplicationProxy() \value Socks5Proxy \l Socks5 proxying is used \value HttpProxy HTTP transparent proxying is used \value HttpCachingProxy Proxying for HTTP requests only \value FtpCachingProxy Proxying for FTP requests only The table below lists different proxy types and their capabilities. Since each proxy type has different capabilities, it is important to understand them before choosing a proxy type. \table \header \o Proxy type \o Description \o Default capabilities \row \o SOCKS 5 \o Generic proxy for any kind of connection. Supports TCP, UDP, binding to a port (incoming connections) and authentication. \o TunnelingCapability, ListeningCapability, UdpTunnelingCapability, HostNameLookupCapability \row \o HTTP \o Implemented using the "CONNECT" command, supports only outgoing TCP connections; supports authentication. \o TunnelingCapability, CachingCapability, HostNameLookupCapability \row \o Caching-only HTTP \o Implemented using normal HTTP commands, it is useful only in the context of HTTP requests (see QNetworkAccessManager) \o CachingCapability, HostNameLookupCapability \row \o Caching FTP \o Implemented using an FTP proxy, it is useful only in the context of FTP requests (see QFtp, QNetworkAccessManager) \o CachingCapability, HostNameLookupCapability \endtable Also note that you shouldn't set the application default proxy (setApplicationProxy()) to a proxy that doesn't have the TunnelingCapability capability. If you do, QTcpSocket will not know how to open connections. \sa setType(), type(), capabilities(), setCapabilities() */ /*! \enum QNetworkProxy::Capability \since 4.5 These flags indicate the capabilities that a given proxy server supports. QNetworkProxy sets different capabilities by default when the object is created (see QNetworkProxy::ProxyType for a list of the defaults). However, it is possible to change the capabitilies after the object has been created with setCapabilities(). The capabilities that QNetworkProxy supports are: \value TunnelingCapability Ability to open transparent, tunneled TCP connections to a remote host. The proxy server relays the transmission verbatim from one side to the other and does no caching. \value ListeningCapability Ability to create a listening socket and wait for an incoming TCP connection from a remote host. \value UdpTunnelingCapability Ability to relay UDP datagrams via the proxy server to and from a remote host. \value CachingCapability Ability to cache the contents of the transfer. This capability is specific to each protocol and proxy type. For example, HTTP proxies can cache the contents of web data transferred with "GET" commands. \value HostNameLookupCapability Ability to connect to perform the lookup on a remote host name and connect to it, as opposed to requiring the application to perform the name lookup and request connection to IP addresses only. */ #include "qnetworkproxy.h" #ifndef QT_NO_NETWORKPROXY #include "private/qnetworkproxy_p.h" #include "private/qsocks5socketengine_p.h" #include "private/qhttpsocketengine_p.h" #include "qauthenticator.h" #include "qhash.h" #include "qmutex.h" #include "qurl.h" QT_BEGIN_NAMESPACE class QSocks5SocketEngineHandler; class QHttpSocketEngineHandler; class QGlobalNetworkProxy { public: QGlobalNetworkProxy() : mutex(QMutex::Recursive) , applicationLevelProxy(0) , applicationLevelProxyFactory(0) , socks5SocketEngineHandler(0) , httpSocketEngineHandler(0) { } ~QGlobalNetworkProxy() { delete applicationLevelProxy; delete applicationLevelProxyFactory; delete socks5SocketEngineHandler; delete httpSocketEngineHandler; } void init() { QMutexLocker lock(&mutex); #ifndef QT_NO_SOCKS5 if (!socks5SocketEngineHandler) socks5SocketEngineHandler = new QSocks5SocketEngineHandler(); #endif #ifndef QT_NO_HTTP if (!httpSocketEngineHandler) httpSocketEngineHandler = new QHttpSocketEngineHandler(); #endif } void setApplicationProxy(const QNetworkProxy &proxy) { QMutexLocker lock(&mutex); if (!applicationLevelProxy) applicationLevelProxy = new QNetworkProxy; *applicationLevelProxy = proxy; delete applicationLevelProxyFactory; applicationLevelProxyFactory = 0; } void setApplicationProxyFactory(QNetworkProxyFactory *factory) { QMutexLocker lock(&mutex); if (applicationLevelProxy) *applicationLevelProxy = QNetworkProxy(); delete applicationLevelProxyFactory; applicationLevelProxyFactory = factory; } QNetworkProxy applicationProxy() { return proxyForQuery(QNetworkProxyQuery()).first(); } QList proxyForQuery(const QNetworkProxyQuery &query); private: QMutex mutex; QNetworkProxy *applicationLevelProxy; QNetworkProxyFactory *applicationLevelProxyFactory; QSocks5SocketEngineHandler *socks5SocketEngineHandler; QHttpSocketEngineHandler *httpSocketEngineHandler; }; QList QGlobalNetworkProxy::proxyForQuery(const QNetworkProxyQuery &query) { QMutexLocker locker(&mutex); QList result; if (!applicationLevelProxyFactory) { if (applicationLevelProxy && applicationLevelProxy->type() != QNetworkProxy::DefaultProxy) result << *applicationLevelProxy; else result << QNetworkProxy(QNetworkProxy::NoProxy); return result; } // we have a factory result = applicationLevelProxyFactory->queryProxy(query); if (result.isEmpty()) { qWarning("QNetworkProxyFactory: factory %p has returned an empty result set", applicationLevelProxyFactory); result << QNetworkProxy(QNetworkProxy::NoProxy); } return result; } Q_GLOBAL_STATIC(QGlobalNetworkProxy, globalNetworkProxy) namespace { template struct StaticAssertTest; template<> struct StaticAssertTest { enum { Value = 1 }; }; } static inline void qt_noop_with_arg(int) {} #define q_static_assert(expr) qt_noop_with_arg(sizeof(StaticAssertTest< expr >::Value)) static QNetworkProxy::Capabilities defaultCapabilitiesForType(QNetworkProxy::ProxyType type) { q_static_assert(int(QNetworkProxy::DefaultProxy) == 0); q_static_assert(int(QNetworkProxy::FtpCachingProxy) == 5); static const int defaults[] = { /* [QNetworkProxy::DefaultProxy] = */ (int(QNetworkProxy::ListeningCapability) | int(QNetworkProxy::TunnelingCapability) | int(QNetworkProxy::UdpTunnelingCapability)), /* [QNetworkProxy::Socks5Proxy] = */ (int(QNetworkProxy::TunnelingCapability) | int(QNetworkProxy::ListeningCapability) | int(QNetworkProxy::UdpTunnelingCapability) | int(QNetworkProxy::HostNameLookupCapability)), // it's weird to talk about the proxy capabilities of a "not proxy"... /* [QNetworkProxy::NoProxy] = */ (int(QNetworkProxy::ListeningCapability) | int(QNetworkProxy::TunnelingCapability) | int(QNetworkProxy::UdpTunnelingCapability)), /* [QNetworkProxy::HttpProxy] = */ (int(QNetworkProxy::TunnelingCapability) | int(QNetworkProxy::CachingCapability) | int(QNetworkProxy::HostNameLookupCapability)), /* [QNetworkProxy::HttpCachingProxy] = */ (int(QNetworkProxy::CachingCapability) | int(QNetworkProxy::HostNameLookupCapability)), /* [QNetworkProxy::FtpCachingProxy] = */ (int(QNetworkProxy::CachingCapability) | int(QNetworkProxy::HostNameLookupCapability)), }; if (int(type) < 0 || int(type) > int(QNetworkProxy::FtpCachingProxy)) type = QNetworkProxy::DefaultProxy; return QNetworkProxy::Capabilities(defaults[int(type)]); } class QNetworkProxyPrivate: public QSharedData { public: QString hostName; QString user; QString password; QNetworkProxy::Capabilities capabilities; quint16 port; QNetworkProxy::ProxyType type; bool capabilitiesSet; inline QNetworkProxyPrivate(QNetworkProxy::ProxyType t = QNetworkProxy::DefaultProxy, const QString &h = QString(), quint16 p = 0, const QString &u = QString(), const QString &pw = QString()) : hostName(h), user(u), password(pw), capabilities(defaultCapabilitiesForType(t)), port(p), type(t), capabilitiesSet(false) { } inline bool operator==(const QNetworkProxyPrivate &other) const { return type == other.type && port == other.port && hostName == other.hostName && user == other.user && password == other.password && capabilities == other.capabilities; } }; template<> void QSharedDataPointer::detach() { if (d && d->ref == 1) return; QNetworkProxyPrivate *x = (d ? new QNetworkProxyPrivate(*d) : new QNetworkProxyPrivate); x->ref.ref(); if (d && !d->ref.deref()) delete d; d = x; } /*! Constructs a QNetworkProxy with DefaultProxy type; the proxy type is determined by applicationProxy(), which defaults to NoProxy. \sa setType(), setApplicationProxy() */ QNetworkProxy::QNetworkProxy() : d(0) { globalNetworkProxy()->init(); } /*! Constructs a QNetworkProxy with \a type, \a hostName, \a port, \a user and \a password. The default capabilities for proxy type \a type are set automatically. \sa capabilities() */ QNetworkProxy::QNetworkProxy(ProxyType type, const QString &hostName, quint16 port, const QString &user, const QString &password) : d(new QNetworkProxyPrivate(type, hostName, port, user, password)) { globalNetworkProxy()->init(); } /*! Constructs a copy of \a other. */ QNetworkProxy::QNetworkProxy(const QNetworkProxy &other) : d(other.d) { } /*! Destroys the QNetworkProxy object. */ QNetworkProxy::~QNetworkProxy() { // QSharedDataPointer takes care of deleting for us } /*! \since 4.4 Compares the value of this network proxy to \a other and returns true if they are equal (same proxy type, server as well as username and password) */ bool QNetworkProxy::operator==(const QNetworkProxy &other) const { return d == other.d || (d && other.d && *d == *other.d); } /*! \fn bool QNetworkProxy::operator!=(const QNetworkProxy &other) const \since 4.4 Compares the value of this network proxy to \a other and returns true if they differ. \*/ /*! \since 4.2 Assigns the value of the network proxy \a other to this network proxy. */ QNetworkProxy &QNetworkProxy::operator=(const QNetworkProxy &other) { d = other.d; return *this; } /*! Sets the proxy type for this instance to be \a type. Note that changing the type of a proxy does not change the set of capabilities this QNetworkProxy object holds if any capabilities have been set with setCapabilities(). \sa type(), setCapabilities() */ void QNetworkProxy::setType(QNetworkProxy::ProxyType type) { d->type = type; if (!d->capabilitiesSet) d->capabilities = defaultCapabilitiesForType(type); } /*! Returns the proxy type for this instance. \sa setType() */ QNetworkProxy::ProxyType QNetworkProxy::type() const { return d ? d->type : DefaultProxy; } /*! \since 4.5 Sets the capabilities of this proxy to \a capabilities. \sa setType(), capabilities() */ void QNetworkProxy::setCapabilities(Capabilities capabilities) { d->capabilities = capabilities; d->capabilitiesSet = true; } /*! \since 4.5 Returns the capabilities of this proxy server. \sa setCapabilities(), type() */ QNetworkProxy::Capabilities QNetworkProxy::capabilities() const { return d ? d->capabilities : defaultCapabilitiesForType(DefaultProxy); } /*! \since 4.4 Returns true if this proxy supports the QNetworkProxy::CachingCapability capability. In Qt 4.4, the capability was tied to the proxy type, but since Qt 4.5 it is possible to remove the capability of caching from a proxy by calling setCapabilities(). \sa capabilities(), type(), isTransparentProxy() */ bool QNetworkProxy::isCachingProxy() const { return capabilities() & CachingCapability; } /*! \since 4.4 Returns true if this proxy supports transparent tunneling of TCP connections. This matches the QNetworkProxy::TunnelingCapability capability. In Qt 4.4, the capability was tied to the proxy type, but since Qt 4.5 it is possible to remove the capability of caching from a proxy by calling setCapabilities(). \sa capabilities(), type(), isCachingProxy() */ bool QNetworkProxy::isTransparentProxy() const { return capabilities() & TunnelingCapability; } /*! Sets the user name for proxy authentication to be \a user. \sa user(), setPassword(), password() */ void QNetworkProxy::setUser(const QString &user) { d->user = user; } /*! Returns the user name used for authentication. \sa setUser(), setPassword(), password() */ QString QNetworkProxy::user() const { return d ? d->user : QString(); } /*! Sets the password for proxy authentication to be \a password. \sa user(), setUser(), password() */ void QNetworkProxy::setPassword(const QString &password) { d->password = password; } /*! Returns the password used for authentication. \sa user(), setPassword(), setUser() */ QString QNetworkProxy::password() const { return d ? d->password : QString(); } /*! Sets the host name of the proxy host to be \a hostName. \sa hostName(), setPort(), port() */ void QNetworkProxy::setHostName(const QString &hostName) { d->hostName = hostName; } /*! Returns the host name of the proxy host. \sa setHostName(), setPort(), port() */ QString QNetworkProxy::hostName() const { return d ? d->hostName : QString(); } /*! Sets the port of the proxy host to be \a port. \sa hostName(), setHostName(), port() */ void QNetworkProxy::setPort(quint16 port) { d->port = port; } /*! Returns the port of the proxy host. \sa setHostName(), setPort(), hostName() */ quint16 QNetworkProxy::port() const { return d ? d->port : 0; } /*! Sets the application level network proxying to be \a networkProxy. If a QAbstractSocket or QTcpSocket has the QNetworkProxy::DefaultProxy type, then the QNetworkProxy set with this function is used. If you want more flexibility in determining which the proxy, use the QNetworkProxyFactory class. Setting a default proxy value with this function will override the application proxy factory set with QNetworkProxyFactory::setApplicationProxyFactory. \sa QNetworkProxyFactory, applicationProxy(), QAbstractSocket::setProxy(), QTcpServer::setProxy() */ void QNetworkProxy::setApplicationProxy(const QNetworkProxy &networkProxy) { if (globalNetworkProxy()) { // don't accept setting the proxy to DefaultProxy if (networkProxy.type() == DefaultProxy) globalNetworkProxy()->setApplicationProxy(QNetworkProxy::NoProxy); else globalNetworkProxy()->setApplicationProxy(networkProxy); } } /*! Returns the application level network proxying. If a QAbstractSocket or QTcpSocket has the QNetworkProxy::DefaultProxy type, then the QNetworkProxy returned by this function is used. \sa QNetworkProxyFactory, setApplicationProxy(), QAbstractSocket::proxy(), QTcpServer::proxy() */ QNetworkProxy QNetworkProxy::applicationProxy() { if (globalNetworkProxy()) return globalNetworkProxy()->applicationProxy(); return QNetworkProxy(); } class QNetworkProxyQueryPrivate: public QSharedData { public: inline QNetworkProxyQueryPrivate() : localPort(-1), type(QNetworkProxyQuery::TcpSocket) { } bool operator==(const QNetworkProxyQueryPrivate &other) const { return type == other.type && localPort == other.localPort && remote == other.remote; } QUrl remote; int localPort; QNetworkProxyQuery::QueryType type; }; template<> void QSharedDataPointer::detach() { if (d && d->ref == 1) return; QNetworkProxyQueryPrivate *x = (d ? new QNetworkProxyQueryPrivate(*d) : new QNetworkProxyQueryPrivate); x->ref.ref(); if (d && !d->ref.deref()) delete d; d = x; } /*! \class QNetworkProxyQuery \since 4.5 \inmodule QtNetwork \brief The QNetworkProxyQuery class is used to query the proxy settings for a socket QNetworkProxyQuery holds the details of a socket being created or request being made. It is used by QNetworkProxy and QNetworkProxyFactory to allow applications to have a more fine-grained control over which proxy servers are used, depending on the details of the query. This allows an application to apply different settings, according to the protocol or destination hostname, for instance. QNetworkProxyQuery supports the following criteria for selecting the proxy: \list \o the type of query \o the local port number to use \o the destination host name \o the destination port number \o the protocol name, such as "http" or "ftp" \o the URL being requested \endlist The destination host name is the host in the connection in the case of outgoing connection sockets. It is the \c hostName parameter passed to QTcpSocket::connectToHost() or the host component of a URL requested with QNetworkRequest. The destination port number is the requested port to connect to in the case of outgoing sockets, while the local port number is the port the socket wishes to use locally before attempting the external connection. In most cases, the local port number is used by listening sockets only (QTcpSocket) or by datagram sockets (QUdpSocket). The protocol name is an arbitrary string that indicates the type of connection being attempted. For example, it can match the scheme of a URL, like "http", "https" and "ftp". In most cases, the proxy selection will not change depending on the protocol, but this information is provided in case a better choice can be made, like choosing an caching HTTP proxy for HTTP-based connections, but a more powerful SOCKSv5 proxy for all others. Some of the criteria may not make sense in all of the types of query. The following table lists the criteria that are most commonly used, according to the type of query. \table \header \o Query type \o Description \row \o TcpSocket \o Normal sockets requesting a connection to a remote server, like QTcpSocket. The peer hostname and peer port match the values passed to QTcpSocket::connectToHost(). The local port is usually -1, indicating the socket has no preference in which port should be used. The URL component is not used. \row \o UdpSocket \o Datagram-based sockets, which can both send and receive. The local port, remote host or remote port fields can all be used or be left unused, depending on the characteristics of the socket. The URL component is not used. \row \o TcpServer \o Passive server sockets that listen on a port and await incoming connections from the network. Normally, only the local port is used, but the remote address could be used in specific circumstances, for example to indicate which remote host a connection is expected from. The URL component is not used. \row \o UrlRequest \o A more high-level request, such as those coming from QNetworkAccessManager. These requests will inevitably use an outgoing TCP socket, but the this query type is provided to indicate that more detailed information is present in the URL component. For ease of implementation, the URL's host and port are set as the destination address. \endtable It should be noted that any of the criteria may be missing or unknown (an empty QString for the hostname or protocol name, -1 for the port numbers). If that happens, the functions executing the query should make their best guess or apply some implementation-defined default values. \sa QNetworkProxy, QNetworkProxyFactory, QNetworkAccessManager, QAbstractSocket::setProxy() */ /*! \enum QNetworkProxyQuery::QueryType Describes the type of one QNetworkProxyQuery query. \value TcpSocket a normal, outgoing TCP socket \value UdpSocket a datagram-based UDP socket, which could send to multiple destinations \value TcpServer a TCP server that listens for incoming connections from the network \value UrlRequest a more complex request which involves loading of a URL \sa queryType(), setQueryType() */ /*! Constructs a default QNetworkProxyQuery object. By default, the query type will be QNetworkProxyQuery::TcpSocket. */ QNetworkProxyQuery::QNetworkProxyQuery() { } /*! Constructs a QNetworkProxyQuery with the URL \a requestUrl and sets the query type to \a queryType. \sa protocolTag(), peerHostName(), peerPort() */ QNetworkProxyQuery::QNetworkProxyQuery(const QUrl &requestUrl, QueryType queryType) { d->remote = requestUrl; d->type = queryType; } /*! Constructs a QNetworkProxyQuery of type \a queryType and sets the protocol tag to be \a protocolTag. This constructor is suitable for QNetworkProxyQuery::TcpSocket queries, because it sets the peer hostname to \a hostname and the peer's port number to \a port. */ QNetworkProxyQuery::QNetworkProxyQuery(const QString &hostname, int port, const QString &protocolTag, QueryType queryType) { d->remote.setScheme(protocolTag); d->remote.setHost(hostname); d->remote.setPort(port); d->type = queryType; } /*! Constructs a QNetworkProxyQuery of type \a queryType and sets the protocol tag to be \a protocolTag. This constructor is suitable for QNetworkProxyQuery::TcpSocket queries because it sets the local port number to \a bindPort. Note that \a bindPort is of type quint16 to indicate the exact port number that is requested. The value of -1 (unknown) is not allowed in this context. \sa localPort() */ QNetworkProxyQuery::QNetworkProxyQuery(quint16 bindPort, const QString &protocolTag, QueryType queryType) { d->remote.setScheme(protocolTag); d->localPort = bindPort; d->type = queryType; } /*! Constructs a QNetworkProxyQuery object that is a copy of \a other. */ QNetworkProxyQuery::QNetworkProxyQuery(const QNetworkProxyQuery &other) : d(other.d) { } /*! Destroys this QNetworkProxyQuery object. */ QNetworkProxyQuery::~QNetworkProxyQuery() { // QSharedDataPointer automatically deletes } /*! Copies the contents of \a other. */ QNetworkProxyQuery &QNetworkProxyQuery::operator=(const QNetworkProxyQuery &other) { d = other.d; return *this; } /*! Returns true if this QNetworkProxyQuery object contains the same data as \a other. */ bool QNetworkProxyQuery::operator==(const QNetworkProxyQuery &other) const { return d == other.d || (d && other.d && *d == *other.d); } /*! \fn bool QNetworkProxyQuery::operator!=(const QNetworkProxyQuery &other) const Returns true if this QNetworkProxyQuery object does not contain the same data as \a other. */ /*! Returns the query type. */ QNetworkProxyQuery::QueryType QNetworkProxyQuery::queryType() const { return d ? d->type : TcpSocket; } /*! Sets the query type of this object to be \a type. */ void QNetworkProxyQuery::setQueryType(QueryType type) { d->type = type; } /*! Returns the port number for the outgoing request or -1 if the port number is not known. If the query type is QNetworkProxyQuery::UrlRequest, this function returns the port number of the URL being requested. In general, frameworks will fill in the port number from their default values. \sa peerHostName(), localPort(), setPeerPort() */ int QNetworkProxyQuery::peerPort() const { return d ? d->remote.port() : -1; } /*! Sets the requested port number for the outgoing connection to be \a port. Valid values are 1 to 65535, or -1 to indicate that the remote port number is unknown. The peer port number can also be used to indicate the expected port number of an incoming connection in the case of QNetworkProxyQuery::UdpSocket or QNetworkProxyQuery::TcpServer query types. \sa peerPort(), setPeerHostName(), setLocalPort() */ void QNetworkProxyQuery::setPeerPort(int port) { d->remote.setPort(port); } /*! Returns the host name or IP address being of the outgoing connection being requested, or an empty string if the remote hostname is not known. If the query type is QNetworkProxyQuery::UrlRequest, this function returns the host component of the URL being requested. \sa peerPort(), localPort(), setPeerHostName() */ QString QNetworkProxyQuery::peerHostName() const { return d ? d->remote.host() : QString(); } /*! Sets the hostname of the outgoing connection being requested to \a hostname. An empty hostname can be used to indicate that the remote host is unknown. The peer host name can also be used to indicate the expected source address of an incoming connection in the case of QNetworkProxyQuery::UdpSocket or QNetworkProxyQuery::TcpServer query types. \sa peerHostName(), setPeerPort(), setLocalPort() */ void QNetworkProxyQuery::setPeerHostName(const QString &hostname) { d->remote.setHost(hostname); } /*! Returns the port number of the socket that will accept incoming packets from remote servers or -1 if the port is not known. \sa peerPort(), peerHostName(), setLocalPort() */ int QNetworkProxyQuery::localPort() const { return d ? d->localPort : -1; } /*! Sets the port number that the socket wishes to use locally to accept incoming packets from remote servers to \a port. The local port is most often used with the QNetworkProxyQuery::TcpServer and QNetworkProxyQuery::UdpSocket query types. Valid values are 0 to 65535 (with 0 indicating that any port number will be acceptable) or -1, which means the local port number is unknown or not applicable. In some circumstances, for special protocols, it's the local port number can also be used with a query of type QNetworkProxyQuery::TcpSocket. When that happens, the socket is indicating it wishes to use the port number \a port when connecting to a remote host. \sa localPort(), setPeerPort(), setPeerHostName() */ void QNetworkProxyQuery::setLocalPort(int port) { d->localPort = port; } /*! Returns the protocol tag for this QNetworkProxyQuery object, or an empty QString in case the protocol tag is unknown. In the case of queries of type QNetworkProxyQuery::UrlRequest, this function returns the value of the scheme component of the URL. \sa setProtocolTag(), url() */ QString QNetworkProxyQuery::protocolTag() const { return d ? d->remote.scheme() : QString(); } /*! Sets the protocol tag for this QNetworkProxyQuery object to be \a protocolTag. The protocol tag is an arbitrary string that indicates which protocol is being talked over the socket, such as "http", "xmpp", "telnet", etc. The protocol tag is used by the backend to return a request that is more specific to the protocol in question: for example, a HTTP connection could be use a caching HTTP proxy server, while all other connections use a more powerful SOCKSv5 proxy server. \sa protocolTag() */ void QNetworkProxyQuery::setProtocolTag(const QString &protocolTag) { d->remote.setScheme(protocolTag); } /*! Returns the URL component of this QNetworkProxyQuery object in case of a query of type QNetworkProxyQuery::UrlRequest. \sa setUrl() */ QUrl QNetworkProxyQuery::url() const { return d ? d->remote : QUrl(); } /*! Sets the URL component of this QNetworkProxyQuery object to be \a url. Setting the URL will also set the protocol tag, the remote host name and port number. This is done so as to facilitate the implementation of the code that determines the proxy server to be used. \sa url(), peerHostName(), peerPort() */ void QNetworkProxyQuery::setUrl(const QUrl &url) { d->remote = url; } /*! \class QNetworkProxyFactory \brief The QNetworkProxyFactory class provides fine-grained proxy selection. \since 4.5 \ingroup network \inmodule QtNetwork QNetworkProxyFactory is an extension to QNetworkProxy, allowing applications to have a more fine-grained control over which proxy servers are used, depending on the socket requesting the proxy. This allows an application to apply different settings, according to the protocol or destination hostname, for instance. QNetworkProxyFactory can be set globally for an application, in which case it will override any global proxies set with QNetworkProxy::setApplicationProxy(). If set globally, any sockets created with Qt will query the factory to determine the proxy to be used. A factory can also be set in certain frameworks that support multiple connections, such as QNetworkAccessManager. When set on such object, the factory will be queried for sockets created by that framework only. */ /*! Creates a QNetworkProxyFactory object. Since QNetworkProxyFactory is an abstract class, you cannot create objects of type QNetworkProxyFactory directly. */ QNetworkProxyFactory::QNetworkProxyFactory() { } /*! Destroys the QNetworkProxyFactory object. */ QNetworkProxyFactory::~QNetworkProxyFactory() { } /*! Enables the use of the platform-specific proxy settings, and only those. See systemProxyForQuery() for more information. Internally, this method (when called with \a enable set to true) sets an application-wide proxy factory. For this reason, this method is mutually exclusive with setApplicationProxyFactory: calling setApplicationProxyFactory overrides the use of the system-wide proxy, and calling setUseSystemConfigurationEnabled overrides any application proxy or proxy factory that was previously set. \since 4.6 */ void QNetworkProxyFactory::setUseSystemConfigurationEnabled(bool enable) { if (enable) { setApplicationProxyFactory(new QSystemConfigurationProxyFactory); } else { setApplicationProxyFactory(0); } } /*! Sets the application-wide proxy factory to be \a factory. This function will take ownership of that object and will delete it when necessary. The application-wide proxy is used as a last-resort when all other proxy selection requests returned QNetworkProxy::DefaultProxy. For example, QTcpSocket objects can have a proxy set with QTcpSocket::setProxy, but if none is set, the proxy factory class set with this function will be queried. If you set a proxy factory with this function, any application level proxies set with QNetworkProxy::setApplicationProxy will be overridden. \sa QNetworkProxy::setApplicationProxy(), QAbstractSocket::proxy(), QAbstractSocket::setProxy() */ void QNetworkProxyFactory::setApplicationProxyFactory(QNetworkProxyFactory *factory) { if (globalNetworkProxy()) globalNetworkProxy()->setApplicationProxyFactory(factory); } /*! \fn QList QNetworkProxyFactory::queryProxy(const QNetworkProxyQuery &query) This function examines takes the query request, \a query, examines the details of the type of socket or request and returns a list of QNetworkProxy objects that indicate the proxy servers to be used, in order of preference. When reimplementing this class, take care to return at least one element. If you cannot determine a better proxy alternative, use QNetworkProxy::DefaultProxy, which tells the code querying for a proxy to use a higher alternative. For example, if this factory is set to a QNetworkAccessManager object, DefaultProxy will tell it to query the application-level proxy settings. If this factory is set as the application proxy factory, DefaultProxy and NoProxy will have the same meaning. */ /*! \fn QList QNetworkProxyFactory::systemProxyForQuery(const QNetworkProxyQuery &query) This function examines takes the query request, \a query, examines the details of the type of socket or request and returns a list of QNetworkProxy objects that indicate the proxy servers to be used, in order of preference. This function can be used to determine the platform-specific proxy settings. This function will use the libraries provided by the operating system to determine the proxy for a given connection, if such libraries exist. If they don't, this function will just return a QNetworkProxy of type QNetworkProxy::NoProxy. On Windows, this function will use the WinHTTP DLL functions. Despite its name, Microsoft suggests using it for all applications that require network connections, not just HTTP. This will respect the proxy settings set on the registry with the proxycfg.exe tool. If those settings are not found, this function will attempt to obtain Internet Explorer's settings and use them. On MacOS X, this function will obtain the proxy settings using the SystemConfiguration framework from Apple. It will apply the FTP, HTTP and HTTPS proxy configurations for queries that contain the protocol tag "ftp", "http" and "https", respectively. If the SOCKS proxy is enabled in that configuration, this function will use the SOCKS server for all queries. If SOCKS isn't enabled, it will use the HTTPS proxy for all TcpSocket and UrlRequest queries. On other systems, there is no standardised method of obtaining the system proxy configuration. This function may be improved in future versions to support those systems. \section1 Limitations These are the limitations for the current version of this function. Future versions of Qt may lift some of the limitations listed here. On MacOS X, this function will ignore the Proxy Auto Configuration settings, since it cannot execute the associated ECMAScript code. */ /*! This function examines takes the query request, \a query, examines the details of the type of socket or request and returns a list of QNetworkProxy objects that indicate the proxy servers to be used, in order of preference. */ QList QNetworkProxyFactory::proxyForQuery(const QNetworkProxyQuery &query) { if (!globalNetworkProxy()) return QList() << QNetworkProxy(QNetworkProxy::NoProxy); return globalNetworkProxy()->proxyForQuery(query); } QT_END_NAMESPACE #endif // QT_NO_NETWORKPROXY