/**************************************************************************** ** ** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies). ** All rights reserved. ** Contact: Nokia Corporation (qt-info@nokia.com) ** ** This file is part of the Qt3Support module of the Qt Toolkit. ** ** $QT_BEGIN_LICENSE:LGPL$ ** No Commercial Usage ** This file contains pre-release code and may not be distributed. ** You may use this file in accordance with the terms and conditions ** contained in the Technology Preview License Agreement accompanying ** this package. ** ** GNU Lesser General Public License Usage ** Alternatively, this file may be used under the terms of the GNU Lesser ** General Public License version 2.1 as published by the Free Software ** Foundation and appearing in the file LICENSE.LGPL included in the ** packaging of this file. Please review the following information to ** ensure the GNU Lesser General Public License version 2.1 requirements ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. ** ** In addition, as a special exception, Nokia gives you certain additional ** rights. These rights are described in the Nokia Qt LGPL Exception ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package. ** ** If you have questions regarding the use of this file, please contact ** Nokia at qt-info@nokia.com. ** ** ** ** ** ** ** ** ** $QT_END_LICENSE$ ** ****************************************************************************/ #include "q3networkprotocol.h" #ifndef QT_NO_NETWORKPROTOCOL #include "q3localfs.h" #include "q3urloperator.h" #include "qtimer.h" #include "qmap.h" #include "q3ptrqueue.h" #include "q3valuelist.h" #include "qurlinfo.h" #include QT_BEGIN_NAMESPACE //#define Q3NETWORKPROTOCOL_DEBUG #define NETWORK_OP_DELAY 1000 extern Q_COMPAT_EXPORT Q3NetworkProtocolDict *q3networkProtocolRegister; Q3NetworkProtocolDict *q3networkProtocolRegister = 0; class Q3NetworkProtocolPrivate { public: Q3NetworkProtocolPrivate( Q3NetworkProtocol *p ) { url = 0; opInProgress = 0; opStartTimer = new QTimer( p ); removeTimer = new QTimer( p ); operationQueue.setAutoDelete( false ); autoDelete = false; removeInterval = 10000; oldOps.setAutoDelete( false ); } ~Q3NetworkProtocolPrivate() { removeTimer->stop(); if ( opInProgress ) { if ( opInProgress == operationQueue.head() ) operationQueue.dequeue(); opInProgress->free(); } while ( operationQueue.head() ) { operationQueue.head()->free(); operationQueue.dequeue(); } while ( oldOps.first() ) { oldOps.first()->free(); oldOps.removeFirst(); } delete opStartTimer; } Q3UrlOperator *url; Q3PtrQueue< Q3NetworkOperation > operationQueue; Q3NetworkOperation *opInProgress; QTimer *opStartTimer, *removeTimer; int removeInterval; bool autoDelete; Q3PtrList< Q3NetworkOperation > oldOps; }; /*! \class Q3NetworkProtocol \brief The Q3NetworkProtocol class provides a common API for network protocols. \compat This is a base class which should be used for network protocols implementations that can then be used in Qt (e.g. in the file dialog) together with the Q3UrlOperator. The easiest way to implement a new network protocol is to reimplement the operation*() methods, e.g. operationGet(), etc. Only the supported operations should be reimplemented. To specify which operations are supported, also reimplement supportedOperations() and return an int that is OR'd together using the supported operations from the \l Q3NetworkProtocol::Operation enum. When you implement a network protocol this way, it is important to emit the correct signals. Also, always emit the finished() signal when an operation is done (on success \e and on failure). Qt relies on correctly emitted finished() signals. */ /*! \fn void Q3NetworkProtocol::newChildren( const Q3ValueList &i, Q3NetworkOperation *op ) This signal is emitted after listChildren() was called and new children (files) have been read from the list of files. \a i holds the information about the new children. \a op is the pointer to the operation object which contains all the information about the operation, including the state, etc. When a protocol emits this signal, Q3NetworkProtocol is smart enough to let the Q3UrlOperator, which is used by the network protocol, emit its corresponding signal. When implementing your own network protocol and reading children, you usually don't read one child at once, but rather a list of them. That's why this signal takes a list of QUrlInfo objects. If you prefer to read just one child at a time you can use the convenience signal newChild(), which takes a single QUrlInfo object. */ /*! \fn void Q3NetworkProtocol::newChild( const QUrlInfo &i, Q3NetworkOperation *op ) This signal is emitted if a new child (file) has been read. Q3NetworkProtocol automatically connects it to a slot which creates a list of QUrlInfo objects (with just one QUrlInfo \a i) and emits the newChildren() signal with this list. \a op is the pointer to the operation object which contains all the information about the operation that has finished, including the state, etc. This is just a convenience signal useful for implementing your own network protocol. In all other cases connect to the newChildren() signal with its list of QUrlInfo objects. */ /*! \fn void Q3NetworkProtocol::finished( Q3NetworkOperation *op ) This signal is emitted when an operation finishes. This signal is always emitted, for both success and failure. \a op is the pointer to the operation object which contains all the information about the operation, including the state, etc. Check the state and error code of the operation object to determine whether or not the operation was successful. When a protocol emits this signal, Q3NetworkProtocol is smart enough to let the Q3UrlOperator, which is used by the network protocol, emit its corresponding signal. */ /*! \fn void Q3NetworkProtocol::start( Q3NetworkOperation *op ) Some operations (such as listChildren()) emit this signal when they start processing the operation. \a op is the pointer to the operation object which contains all the information about the operation, including the state, etc. When a protocol emits this signal, Q3NetworkProtocol is smart enough to let the Q3UrlOperator, which is used by the network protocol, emit its corresponding signal. */ /*! \fn void Q3NetworkProtocol::createdDirectory( const QUrlInfo &i, Q3NetworkOperation *op ) This signal is emitted when mkdir() has been successful and the directory has been created. \a i holds the information about the new directory. \a op is the pointer to the operation object which contains all the information about the operation, including the state, etc. Using op->arg( 0 ), you can get the file name of the new directory. When a protocol emits this signal, Q3NetworkProtocol is smart enough to let the Q3UrlOperator, which is used by the network protocol, emit its corresponding signal. */ /*! \fn void Q3NetworkProtocol::removed( Q3NetworkOperation *op ) This signal is emitted when remove() has been succesiisful and the file has been removed. \a op holds the file name of the removed file in the first argument, accessible with op->arg( 0 ). \a op is the pointer to the operation object which contains all the information about the operation, including the state, etc. When a protocol emits this signal, Q3NetworkProtocol is smart enough to let the Q3UrlOperator, which is used by the network protocol, emit its corresponding signal. */ /*! \fn void Q3NetworkProtocol::itemChanged( Q3NetworkOperation *op ) This signal is emitted whenever a file which is a child of this URL has been changed, e.g. by successfully calling rename(). \a op holds the original and the new file names in the first and second arguments, accessible with op->arg( 0 ) and op->arg( 1 ) respectively. \a op is the pointer to the operation object which contains all the information about the operation, including the state, etc. When a protocol emits this signal, Q3NetworkProtocol is smart enough to let the Q3UrlOperator, which is used by the network protocol, emit its corresponding signal. */ /*! \fn void Q3NetworkProtocol::data( const QByteArray &data, Q3NetworkOperation *op ) This signal is emitted when new \a data has been received after calling get() or put(). \a op holds the name of the file from which data is retrieved or uploaded in its first argument, and the (raw) data in its second argument. You can get them with op->arg( 0 ) and op->rawArg( 1 ). \a op is the pointer to the operation object, which contains all the information about the operation, including the state, etc. When a protocol emits this signal, Q3NetworkProtocol is smart enough to let the Q3UrlOperator (which is used by the network protocol) emit its corresponding signal. */ /*! \fn void Q3NetworkProtocol::dataTransferProgress( int bytesDone, int bytesTotal, Q3NetworkOperation *op ) This signal is emitted during the transfer of data (using put() or get()). \a bytesDone is how many bytes of \a bytesTotal have been transferred. \a bytesTotal may be -1, which means that the total number of bytes is not known. \a op is the pointer to the operation object which contains all the information about the operation, including the state, etc. When a protocol emits this signal, Q3NetworkProtocol is smart enough to let the Q3UrlOperator, which is used by the network protocol, emit its corresponding signal. */ /*! \fn void Q3NetworkProtocol::connectionStateChanged( int state, const QString &data ) This signal is emitted whenever the state of the connection of the network protocol is changed. \a state describes the new state, which is one of, \c ConHostFound, \c ConConnected or \c ConClosed. \a data is a message text. */ /*! \enum Q3NetworkProtocol::State This enum contains the state that a Q3NetworkOperation can have. \value StWaiting The operation is in the Q3NetworkProtocol's queue waiting to be prcessed. \value StInProgress The operation is being processed. \value StDone The operation has been processed successfully. \value StFailed The operation has been processed but an error occurred. \value StStopped The operation has been processed but has been stopped before it finished, and is waiting to be processed. */ /*! \enum Q3NetworkProtocol::Operation This enum lists the possible operations that a network protocol can support. supportedOperations() returns an int of these that is OR'd together. Also, the type() of a Q3NetworkOperation is always one of these values. \value OpListChildren List the children of a URL, e.g. of a directory. \value OpMkDir Create a directory. \value OpRemove Remove a child (e.g. a file). \value OpRename Rename a child (e.g. a file). \value OpGet Get data from a location. \value OpPut Put data to a location. \omitvalue OpMkdir */ /*! \enum Q3NetworkProtocol::ConnectionState When the connection state of a network protocol changes it emits the signal connectionStateChanged(). The first argument is one of the following values: \value ConHostFound Host has been found. \value ConConnected Connection to the host has been established. \value ConClosed Connection has been closed. */ /*! \enum Q3NetworkProtocol::Error When an operation fails (finishes unsuccessfully), the Q3NetworkOperation of the operation returns an error code which has one of the following values: \value NoError No error occurred. \value ErrValid The URL you are operating on is not valid. \value ErrUnknownProtocol There is no protocol implementation available for the protocol of the URL you are operating on (e.g. if the protocol is http and no http implementation has been registered). \value ErrUnsupported The operation is not supported by the protocol. \value ErrParse The URL could not be parsed correctly. \value ErrLoginIncorrect You needed to login but the username or password is wrong. \value ErrHostNotFound The specified host (in the URL) couldn't be found. \value ErrListChildren An error occurred while listing the children (files). \value ErrMkDir An error occurred when creating a directory. \value ErrRemove An error occurred when removing a child (file). \value ErrRename An error occurred when renaming a child (file). \value ErrGet An error occurred while getting (retrieving) data. \value ErrPut An error occurred while putting (uploading) data. \value ErrFileNotExisting A file which is needed by the operation doesn't exist. \value ErrPermissionDenied Permission for doing the operation has been denied. \omitvalue ErrMkdir \omitvalue ErrListChlidren You should also use these error codes when implementing custom network protocols. If this is not possible, you can define your own error codes by using integer values that don't conflict with any of these values. */ /*! Constructor of the network protocol base class. Does some initialization and connecting of signals and slots. */ Q3NetworkProtocol::Q3NetworkProtocol() : QObject() { d = new Q3NetworkProtocolPrivate( this ); connect( d->opStartTimer, SIGNAL(timeout()), this, SLOT(startOps()) ); connect( d->removeTimer, SIGNAL(timeout()), this, SLOT(removeMe()) ); if ( url() ) { connect( this, SIGNAL(data(QByteArray,Q3NetworkOperation*)), url(), SIGNAL(data(QByteArray,Q3NetworkOperation*)) ); connect( this, SIGNAL(finished(Q3NetworkOperation*)), url(), SIGNAL(finished(Q3NetworkOperation*)) ); connect( this, SIGNAL(start(Q3NetworkOperation*)), url(), SIGNAL(start(Q3NetworkOperation*)) ); connect( this, SIGNAL(newChildren(Q3ValueList,Q3NetworkOperation*)), url(), SIGNAL(newChildren(Q3ValueList,Q3NetworkOperation*)) ); connect( this, SIGNAL(newChildren(Q3ValueList,Q3NetworkOperation*)), url(), SLOT(addEntry(Q3ValueList)) ); connect( this, SIGNAL(createdDirectory(QUrlInfo,Q3NetworkOperation*)), url(), SIGNAL(createdDirectory(QUrlInfo,Q3NetworkOperation*)) ); connect( this, SIGNAL(removed(Q3NetworkOperation*)), url(), SIGNAL(removed(Q3NetworkOperation*)) ); connect( this, SIGNAL(itemChanged(Q3NetworkOperation*)), url(), SIGNAL(itemChanged(Q3NetworkOperation*)) ); connect( this, SIGNAL(dataTransferProgress(int,int,Q3NetworkOperation*)), url(), SIGNAL(dataTransferProgress(int,int,Q3NetworkOperation*)) ); connect( this, SIGNAL(connectionStateChanged(int,QString)), url(), SIGNAL(connectionStateChanged(int,QString)) ); } connect( this, SIGNAL(finished(Q3NetworkOperation*)), this, SLOT(processNextOperation(Q3NetworkOperation*)) ); connect( this, SIGNAL(newChild(QUrlInfo,Q3NetworkOperation*)), this, SLOT(emitNewChildren(QUrlInfo,Q3NetworkOperation*)) ); } /*! Destructor. */ Q3NetworkProtocol::~Q3NetworkProtocol() { delete d; } /*! Sets the Q3UrlOperator, on which the protocol works, to \a u. \sa Q3UrlOperator */ void Q3NetworkProtocol::setUrl( Q3UrlOperator *u ) { if ( url() ) { disconnect( this, SIGNAL(data(QByteArray,Q3NetworkOperation*)), url(), SIGNAL(data(QByteArray,Q3NetworkOperation*)) ); disconnect( this, SIGNAL(finished(Q3NetworkOperation*)), url(), SIGNAL(finished(Q3NetworkOperation*)) ); disconnect( this, SIGNAL(start(Q3NetworkOperation*)), url(), SIGNAL(start(Q3NetworkOperation*)) ); disconnect( this, SIGNAL(newChildren(Q3ValueList,Q3NetworkOperation*)), url(), SIGNAL(newChildren(Q3ValueList,Q3NetworkOperation*)) ); disconnect( this, SIGNAL(newChildren(Q3ValueList,Q3NetworkOperation*)), url(), SLOT(addEntry(Q3ValueList)) ); disconnect( this, SIGNAL(createdDirectory(QUrlInfo,Q3NetworkOperation*)), url(), SIGNAL(createdDirectory(QUrlInfo,Q3NetworkOperation*)) ); disconnect( this, SIGNAL(removed(Q3NetworkOperation*)), url(), SIGNAL(removed(Q3NetworkOperation*)) ); disconnect( this, SIGNAL(itemChanged(Q3NetworkOperation*)), url(), SIGNAL(itemChanged(Q3NetworkOperation*)) ); disconnect( this, SIGNAL(dataTransferProgress(int,int,Q3NetworkOperation*)), url(), SIGNAL(dataTransferProgress(int,int,Q3NetworkOperation*)) ); disconnect( this, SIGNAL(connectionStateChanged(int,QString)), url(), SIGNAL(connectionStateChanged(int,QString)) ); } // ### if autoDelete is true, we should delete the Q3UrlOperator (something // like below; but that is not possible since it would delete this, too). //if ( d->autoDelete && (d->url!=u) ) { // delete d->url; // destructor deletes the network protocol //} d->url = u; if ( url() ) { connect( this, SIGNAL(data(QByteArray,Q3NetworkOperation*)), url(), SIGNAL(data(QByteArray,Q3NetworkOperation*)) ); connect( this, SIGNAL(finished(Q3NetworkOperation*)), url(), SIGNAL(finished(Q3NetworkOperation*)) ); connect( this, SIGNAL(start(Q3NetworkOperation*)), url(), SIGNAL(start(Q3NetworkOperation*)) ); connect( this, SIGNAL(newChildren(Q3ValueList,Q3NetworkOperation*)), url(), SIGNAL(newChildren(Q3ValueList,Q3NetworkOperation*)) ); connect( this, SIGNAL(newChildren(Q3ValueList,Q3NetworkOperation*)), url(), SLOT(addEntry(Q3ValueList)) ); connect( this, SIGNAL(createdDirectory(QUrlInfo,Q3NetworkOperation*)), url(), SIGNAL(createdDirectory(QUrlInfo,Q3NetworkOperation*)) ); connect( this, SIGNAL(removed(Q3NetworkOperation*)), url(), SIGNAL(removed(Q3NetworkOperation*)) ); connect( this, SIGNAL(itemChanged(Q3NetworkOperation*)), url(), SIGNAL(itemChanged(Q3NetworkOperation*)) ); connect( this, SIGNAL(dataTransferProgress(int,int,Q3NetworkOperation*)), url(), SIGNAL(dataTransferProgress(int,int,Q3NetworkOperation*)) ); connect( this, SIGNAL(connectionStateChanged(int,QString)), url(), SIGNAL(connectionStateChanged(int,QString)) ); } if ( !d->opInProgress && !d->operationQueue.isEmpty() ) d->opStartTimer->start( 0, true ); } /*! For processing operations the network protocol base class calls this method quite often. This should be reimplemented by new network protocols. It should return true if the connection is OK (open); otherwise it should return false. If the connection is not open the protocol should open it. If the connection can't be opened (e.g. because you already tried but the host couldn't be found), set the state of \a op to Q3NetworkProtocol::StFailed and emit the finished() signal with this Q3NetworkOperation as argument. \a op is the operation that needs an open connection. */ bool Q3NetworkProtocol::checkConnection( Q3NetworkOperation * ) { return true; } /*! Returns an int that is OR'd together using the enum values of \l{Q3NetworkProtocol::Operation}, which describes which operations are supported by the network protocol. Should be reimplemented by new network protocols. */ int Q3NetworkProtocol::supportedOperations() const { return 0; } /*! Adds the operation \a op to the operation queue. The operation will be processed as soon as possible. This method returns immediately. */ void Q3NetworkProtocol::addOperation( Q3NetworkOperation *op ) { #ifdef Q3NETWORKPROTOCOL_DEBUG qDebug( "Q3NetworkOperation: addOperation: %p %d", op, op->operation() ); #endif d->operationQueue.enqueue( op ); if ( !d->opInProgress ) d->opStartTimer->start( 0, true ); } /*! Static method to register a network protocol for Qt. For example, if you have an implementation of NNTP (called Nntp) which is derived from Q3NetworkProtocol, call: \snippet doc/src/snippets/code/src_qt3support_network_q3networkprotocol.cpp 0 after which your implementation is registered for future nntp operations. The name of the protocol is given in \a protocol and a pointer to the protocol factory is given in \a protocolFactory. */ void Q3NetworkProtocol::registerNetworkProtocol( const QString &protocol, Q3NetworkProtocolFactoryBase *protocolFactory ) { if ( !q3networkProtocolRegister ) { q3networkProtocolRegister = new Q3NetworkProtocolDict; Q3NetworkProtocol::registerNetworkProtocol( QLatin1String("file"), new Q3NetworkProtocolFactory< Q3LocalFs > ); } q3networkProtocolRegister->insert( protocol, protocolFactory ); } /*! Static method to get a new instance of the network protocol \a protocol. For example, if you need to do some FTP operations, do the following: \snippet doc/src/snippets/code/src_qt3support_network_q3networkprotocol.cpp 1 This returns a pointer to a new instance of an ftp implementation or null if no protocol for ftp was registered. The ownership of the pointer is transferred to you, so you must delete it if you don't need it anymore. Normally you should not work directly with network protocols, so you will not need to call this method yourself. Instead, use Q3UrlOperator, which makes working with network protocols much more convenient. \sa Q3UrlOperator */ Q3NetworkProtocol *Q3NetworkProtocol::getNetworkProtocol( const QString &protocol ) { if ( !q3networkProtocolRegister ) { q3networkProtocolRegister = new Q3NetworkProtocolDict; Q3NetworkProtocol::registerNetworkProtocol( QLatin1String("file"), new Q3NetworkProtocolFactory< Q3LocalFs > ); } if ( protocol.isNull() ) return 0; Q3NetworkProtocolFactoryBase *factory = q3networkProtocolRegister->find( protocol ); if ( factory ) return factory->createObject(); return 0; } /*! Returns true if the only protocol registered is for working on the local filesystem; returns false if other network protocols are also registered. */ bool Q3NetworkProtocol::hasOnlyLocalFileSystem() { if ( !q3networkProtocolRegister ) return false; Q3DictIterator< Q3NetworkProtocolFactoryBase > it( *q3networkProtocolRegister ); for ( ; it.current(); ++it ) if ( it.currentKey() != QLatin1String("file") ) return false; return true; } /*! \internal Starts processing network operations. */ void Q3NetworkProtocol::startOps() { #ifdef Q3NETWORKPROTOCOL_DEBUG qDebug( "Q3NetworkOperation: start processing operations" ); #endif processNextOperation( 0 ); } /*! \internal Processes the operation \a op. It calls the corresponding operation[something]( Q3NetworkOperation * ) methods. */ void Q3NetworkProtocol::processOperation( Q3NetworkOperation *op ) { if ( !op ) return; switch ( op->operation() ) { case OpListChildren: operationListChildren( op ); break; case OpMkDir: operationMkDir( op ); break; case OpRemove: operationRemove( op ); break; case OpRename: operationRename( op ); break; case OpGet: operationGet( op ); break; case OpPut: operationPut( op ); break; } } /*! When implementing a new network protocol, this method should be reimplemented if the protocol supports listing children (files); this method should then process this Q3NetworkOperation. \a op is the pointer to the operation object which contains all the information on the operation that has finished, including the state, etc. */ void Q3NetworkProtocol::operationListChildren( Q3NetworkOperation * ) { } /*! When implementing a new network protocol, this method should be reimplemented if the protocol supports making directories; this method should then process this Q3NetworkOperation. \a op is the pointer to the operation object which contains all the information on the operation that has finished, including the state, etc. */ void Q3NetworkProtocol::operationMkDir( Q3NetworkOperation * ) { } /*! When implementing a new network protocol, this method should be reimplemented if the protocol supports removing children (files); this method should then process this Q3NetworkOperation. \a op is the pointer to the operation object which contains all the information on the operation that has finished, including the state, etc. */ void Q3NetworkProtocol::operationRemove( Q3NetworkOperation * ) { } /*! When implementing a new network protocol, this method should be reimplemented if the protocol supports renaming children (files); this method should then process this Q3NetworkOperation. \a op is the pointer to the operation object which contains all the information on the operation that has finished, including the state, etc. */ void Q3NetworkProtocol::operationRename( Q3NetworkOperation * ) { } /*! When implementing a new network protocol, this method should be reimplemented if the protocol supports getting data; this method should then process the Q3NetworkOperation. \a op is the pointer to the operation object which contains all the information on the operation that has finished, including the state, etc. */ void Q3NetworkProtocol::operationGet( Q3NetworkOperation * ) { } /*! When implementing a new network protocol, this method should be reimplemented if the protocol supports putting (uploading) data; this method should then process the Q3NetworkOperation. \a op is the pointer to the operation object which contains all the information on the operation that has finished, including the state, etc. */ void Q3NetworkProtocol::operationPut( Q3NetworkOperation * ) { } /*! \internal */ void Q3NetworkProtocol::operationPutChunk( Q3NetworkOperation * ) { } /*! \internal Handles operations. Deletes the previous operation object and tries to process the next operation. It also checks the connection state and only processes the next operation, if the connection of the protocol is open. Otherwise it waits until the protocol opens the connection. */ void Q3NetworkProtocol::processNextOperation( Q3NetworkOperation *old ) { #ifdef Q3NETWORKPROTOCOL_DEBUG qDebug( "Q3NetworkOperation: process next operation, old: %p", old ); #endif d->removeTimer->stop(); if ( old ) d->oldOps.append( old ); if ( d->opInProgress && d->opInProgress!=old ) d->oldOps.append( d->opInProgress ); if ( d->operationQueue.isEmpty() ) { d->opInProgress = 0; if ( d->autoDelete ) d->removeTimer->start( d->removeInterval, true ); return; } Q3NetworkOperation *op = d->operationQueue.head(); d->opInProgress = op; if ( !checkConnection( op ) ) { if ( op->state() != Q3NetworkProtocol::StFailed ) { d->opStartTimer->start( 0, true ); } else { d->operationQueue.dequeue(); clearOperationQueue(); emit finished( op ); } return; } d->opInProgress = op; d->operationQueue.dequeue(); processOperation( op ); } /*! Returns the Q3UrlOperator on which the protocol works. */ Q3UrlOperator *Q3NetworkProtocol::url() const { return d->url; } /*! Returns the operation, which is being processed, or 0 of no operation is being processed at the moment. */ Q3NetworkOperation *Q3NetworkProtocol::operationInProgress() const { return d->opInProgress; } /*! Clears the operation queue. */ void Q3NetworkProtocol::clearOperationQueue() { d->operationQueue.dequeue(); d->operationQueue.setAutoDelete( true ); d->operationQueue.clear(); } /*! Stops the current operation that is being processed and clears all waiting operations. */ void Q3NetworkProtocol::stop() { Q3NetworkOperation *op = d->opInProgress; clearOperationQueue(); if ( op ) { op->setState( StStopped ); op->setProtocolDetail( tr( "Operation stopped by the user" ) ); emit finished( op ); setUrl( 0 ); op->free(); } } /*! Because it's sometimes hard to take care of removing network protocol instances, Q3NetworkProtocol provides an auto-delete mechanism. If you set \a b to true, the network protocol instance is removed after it has been inactive for \a i milliseconds (i.e. \a i milliseconds after the last operation has been processed). If you set \a b to false the auto-delete mechanism is switched off. If you switch on auto-delete, the Q3NetworkProtocol also deletes its Q3UrlOperator. */ void Q3NetworkProtocol::setAutoDelete( bool b, int i ) { d->autoDelete = b; d->removeInterval = i; } /*! Returns true if auto-deleting is enabled; otherwise returns false. \sa Q3NetworkProtocol::setAutoDelete() */ bool Q3NetworkProtocol::autoDelete() const { return d->autoDelete; } /*! \internal */ void Q3NetworkProtocol::removeMe() { if ( d->autoDelete ) { #ifdef Q3NETWORKPROTOCOL_DEBUG qDebug( "Q3NetworkOperation: autodelete of Q3NetworkProtocol %p", this ); #endif delete d->url; // destructor deletes the network protocol } } void Q3NetworkProtocol::emitNewChildren( const QUrlInfo &i, Q3NetworkOperation *op ) { Q3ValueList lst; lst << i; emit newChildren( lst, op ); } class Q3NetworkOperationPrivate { public: Q3NetworkProtocol::Operation operation; Q3NetworkProtocol::State state; QMap args; QMap rawArgs; QString protocolDetail; int errorCode; QTimer *deleteTimer; }; /*! \class Q3NetworkOperation \brief The Q3NetworkOperation class provides common operations for network protocols. \compat An object is created to describe the operation and the current state for each operation that a network protocol should process. \sa Q3NetworkProtocol */ /*! Constructs a network operation object. \a operation is the type of the operation, and \a arg0, \a arg1 and \a arg2 are the first three arguments of the operation. The state is initialized to Q3NetworkProtocol::StWaiting. \sa Q3NetworkProtocol::Operation Q3NetworkProtocol::State */ Q3NetworkOperation::Q3NetworkOperation( Q3NetworkProtocol::Operation operation, const QString &arg0, const QString &arg1, const QString &arg2 ) { d = new Q3NetworkOperationPrivate; d->deleteTimer = new QTimer( this ); connect( d->deleteTimer, SIGNAL(timeout()), this, SLOT(deleteMe()) ); d->operation = operation; d->state = Q3NetworkProtocol::StWaiting; d->args[ 0 ] = arg0; d->args[ 1 ] = arg1; d->args[ 2 ] = arg2; d->rawArgs[ 0 ] = QByteArray( 0 ); d->rawArgs[ 1 ] = QByteArray( 0 ); d->rawArgs[ 2 ] = QByteArray( 0 ); d->protocolDetail.clear(); d->errorCode = (int)Q3NetworkProtocol::NoError; } /*! Constructs a network operation object. \a operation is the type of the operation, and \a arg0, \a arg1 and \a arg2 are the first three raw data arguments of the operation. The state is initialized to Q3NetworkProtocol::StWaiting. \sa Q3NetworkProtocol::Operation Q3NetworkProtocol::State */ Q3NetworkOperation::Q3NetworkOperation( Q3NetworkProtocol::Operation operation, const QByteArray &arg0, const QByteArray &arg1, const QByteArray &arg2 ) { d = new Q3NetworkOperationPrivate; d->deleteTimer = new QTimer( this ); connect( d->deleteTimer, SIGNAL(timeout()), this, SLOT(deleteMe()) ); d->operation = operation; d->state = Q3NetworkProtocol::StWaiting; d->args[ 0 ].clear(); d->args[ 1 ].clear(); d->args[ 2 ].clear(); d->rawArgs[ 0 ] = arg0; d->rawArgs[ 1 ] = arg1; d->rawArgs[ 2 ] = arg2; d->protocolDetail.clear(); d->errorCode = (int)Q3NetworkProtocol::NoError; } /*! Destructor. */ Q3NetworkOperation::~Q3NetworkOperation() { qDeleteInEventHandler(d->deleteTimer); delete d; } /*! Sets the \a state of the operation object. This should be done by the network protocol during processing; at the end it should be set to Q3NetworkProtocol::StDone or Q3NetworkProtocol::StFailed, depending on success or failure. \sa Q3NetworkProtocol::State */ void Q3NetworkOperation::setState( Q3NetworkProtocol::State state ) { if ( d->deleteTimer->isActive() ) { d->deleteTimer->stop(); d->deleteTimer->start( NETWORK_OP_DELAY ); } d->state = state; } /*! If the operation failed, the error message can be specified as \a detail. */ void Q3NetworkOperation::setProtocolDetail( const QString &detail ) { if ( d->deleteTimer->isActive() ) { d->deleteTimer->stop(); d->deleteTimer->start( NETWORK_OP_DELAY ); } d->protocolDetail = detail; } /*! Sets the error code to \a ec. If the operation failed, the protocol should set an error code to describe the error in more detail. If possible, one of the error codes defined in Q3NetworkProtocol should be used. \sa setProtocolDetail() Q3NetworkProtocol::Error */ void Q3NetworkOperation::setErrorCode( int ec ) { if ( d->deleteTimer->isActive() ) { d->deleteTimer->stop(); d->deleteTimer->start( NETWORK_OP_DELAY ); } d->errorCode = ec; } /*! Sets the network operation's \a{num}-th argument to \a arg. */ void Q3NetworkOperation::setArg( int num, const QString &arg ) { if ( d->deleteTimer->isActive() ) { d->deleteTimer->stop(); d->deleteTimer->start( NETWORK_OP_DELAY ); } d->args[ num ] = arg; } /*! Sets the network operation's \a{num}-th raw data argument to \a arg. */ void Q3NetworkOperation::setRawArg( int num, const QByteArray &arg ) { if ( d->deleteTimer->isActive() ) { d->deleteTimer->stop(); d->deleteTimer->start( NETWORK_OP_DELAY ); } d->rawArgs[ num ] = arg; } /*! Returns the type of the operation. */ Q3NetworkProtocol::Operation Q3NetworkOperation::operation() const { if ( d->deleteTimer->isActive() ) { d->deleteTimer->stop(); d->deleteTimer->start( NETWORK_OP_DELAY ); } return d->operation; } /*! Returns the state of the operation. You can determine whether an operation is still waiting to be processed, is being processed, has been processed successfully, or failed. */ Q3NetworkProtocol::State Q3NetworkOperation::state() const { if ( d->deleteTimer->isActive() ) { d->deleteTimer->stop(); d->deleteTimer->start( NETWORK_OP_DELAY ); } return d->state; } /*! Returns the operation's \a{num}-th argument. If this argument was not already set, an empty string is returned. */ QString Q3NetworkOperation::arg( int num ) const { if ( d->deleteTimer->isActive() ) { d->deleteTimer->stop(); d->deleteTimer->start( NETWORK_OP_DELAY ); } return d->args[ num ]; } /*! Returns the operation's \a{num}-th raw data argument. If this argument was not already set, an empty bytearray is returned. */ QByteArray Q3NetworkOperation::rawArg( int num ) const { if ( d->deleteTimer->isActive() ) { d->deleteTimer->stop(); d->deleteTimer->start( NETWORK_OP_DELAY ); } return d->rawArgs[ num ]; } /*! Returns a detailed error message for the last error. This must have been set using setProtocolDetail(). */ QString Q3NetworkOperation::protocolDetail() const { if ( d->deleteTimer->isActive() ) { d->deleteTimer->stop(); d->deleteTimer->start( NETWORK_OP_DELAY ); } return d->protocolDetail; } /*! Returns the error code for the last error that occurred. */ int Q3NetworkOperation::errorCode() const { if ( d->deleteTimer->isActive() ) { d->deleteTimer->stop(); d->deleteTimer->start( NETWORK_OP_DELAY ); } return d->errorCode; } /*! \internal */ QByteArray& Q3NetworkOperation::raw( int num ) const { if ( d->deleteTimer->isActive() ) { d->deleteTimer->stop(); d->deleteTimer->start( NETWORK_OP_DELAY ); } return d->rawArgs[ num ]; } /*! Sets this object to delete itself when it hasn't been used for one second. Because Q3NetworkOperation pointers are passed around a lot the Q3NetworkProtocol generally does not have enough knowledge to delete these at the correct time. If a Q3NetworkProtocol doesn't need an operation any more it will call this function instead. Note: you should never need to call the method yourself. */ void Q3NetworkOperation::free() { d->deleteTimer->start( NETWORK_OP_DELAY ); } /*! \internal Internal slot for auto-deletion. */ void Q3NetworkOperation::deleteMe() { delete this; } QT_END_NAMESPACE #include "moc_q3networkprotocol.cpp" #endif