/**************************************************************************** ** ** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies). ** Contact: http://www.qt-project.org/legal ** ** This file is part of the Qt3Support module of the Qt Toolkit. ** ** $QT_BEGIN_LICENSE:LGPL$ ** Commercial License Usage ** Licensees holding valid commercial Qt licenses may use this file in ** accordance with the commercial license agreement provided with the ** Software or, alternatively, in accordance with the terms contained in ** a written agreement between you and Digia. For licensing terms and ** conditions see http://qt.digia.com/licensing. For further information ** use the contact form at http://qt.digia.com/contact-us. ** ** GNU Lesser General Public License Usage ** Alternatively, this file may be used under the terms of the GNU Lesser ** General Public License version 2.1 as published by the Free Software ** Foundation and appearing in the file LICENSE.LGPL included in the ** packaging of this file. Please review the following information to ** ensure the GNU Lesser General Public License version 2.1 requirements ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. ** ** In addition, as a special exception, Digia gives you certain additional ** rights. These rights are described in the Digia Qt LGPL Exception ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package. ** ** GNU General Public License Usage ** Alternatively, this file may be used under the terms of the GNU ** General Public License version 3.0 as published by the Free Software ** Foundation and appearing in the file LICENSE.GPL included in the ** packaging of this file. Please review the following information to ** ensure the GNU General Public License version 3.0 requirements will be ** met: http://www.gnu.org/copyleft/gpl.html. ** ** ** $QT_END_LICENSE$ ** ****************************************************************************/ #include "q3textedit.h" #ifndef QT_NO_TEXTEDIT #include #include "qpainter.h" #include "qpen.h" #include "qbrush.h" #include "qpixmap.h" #include "qfont.h" #include "qcolor.h" #include "qstyle.h" #include "qsize.h" #include "qevent.h" #include "qtimer.h" #include "qapplication.h" #include "q3listbox.h" #include "qclipboard.h" #include "qcolordialog.h" #include "q3stylesheet.h" #include "q3dragobject.h" #include "qurl.h" #include "qcursor.h" #include "qregexp.h" #include "q3popupmenu.h" #include "qstack.h" #include "qmetaobject.h" #include "q3textbrowser.h" #include "private/q3syntaxhighlighter_p.h" #include "qtextformat.h" #ifndef QT_NO_IM #include #endif #ifndef QT_NO_ACCEL #include #define ACCEL_KEY(k) QLatin1Char('\t') + QString(QKeySequence(Qt::CTRL | Qt::Key_ ## k)) #else #define ACCEL_KEY(k) QLatin1Char('\t' )+ QString::fromLatin1("Ctrl+" #k) #endif #ifdef QT_TEXTEDIT_OPTIMIZATION #define LOGOFFSET(i) d->logOffset + i #endif QT_BEGIN_NAMESPACE struct QUndoRedoInfoPrivate { Q3TextString text; }; class Q3TextEditPrivate { public: Q3TextEditPrivate() :preeditStart(-1),preeditLength(-1),numPreeditSelections(0),ensureCursorVisibleInShowEvent(false), tabChangesFocus(false), #ifndef QT_NO_CLIPBOARD clipboard_mode(QClipboard::Clipboard), #endif #ifdef QT_TEXTEDIT_OPTIMIZATION od(0), optimMode(false), maxLogLines(-1), logOffset(0), #endif autoFormatting((uint)Q3TextEdit::AutoAll), cursorRepaintMode(false), cursorBlinkActive(false) { for (int i=0; i<7; i++) id[i] = 0; } int id[7]; int preeditStart; int preeditLength; int numPreeditSelections; uint ensureCursorVisibleInShowEvent : 1; uint tabChangesFocus : 1; QString scrollToAnchor; // used to deferr scrollToAnchor() until the show event when we are resized QString pressedName; QString onName; #ifndef QT_NO_CLIPBOARD QClipboard::Mode clipboard_mode; #endif QTimer *trippleClickTimer; QPoint trippleClickPoint; #ifdef QT_TEXTEDIT_OPTIMIZATION Q3TextEditOptimPrivate * od; bool optimMode : 1; int maxLogLines; int logOffset; #endif Q3TextEdit::AutoFormatting autoFormatting; uint cursorRepaintMode : 1; uint cursorBlinkActive : 1; }; #ifndef QT_NO_MIME class Q3RichTextDrag : public Q3TextDrag { public: Q3RichTextDrag(QWidget *dragSource = 0, const char *name = 0); void setPlainText(const QString &txt) { setText(txt); } void setRichText(const QString &txt) { richTxt = txt; } virtual QByteArray encodedData(const char *mime) const; virtual const char* format(int i) const; static bool decode(QMimeSource *e, QString &str, const QString &mimetype, const QString &subtype); static bool canDecode(QMimeSource* e); private: QString richTxt; }; Q3RichTextDrag::Q3RichTextDrag(QWidget *dragSource, const char *name) : Q3TextDrag(dragSource, name) { } QByteArray Q3RichTextDrag::encodedData(const char *mime) const { if (qstrcmp("application/x-qrichtext", mime) == 0) { return richTxt.toUtf8(); // #### perhaps we should use USC2 instead? } else return Q3TextDrag::encodedData(mime); } bool Q3RichTextDrag::decode(QMimeSource *e, QString &str, const QString &mimetype, const QString &subtype) { if (mimetype == QLatin1String("application/x-qrichtext")) { // do richtext decode const char *mime; int i; for (i = 0; (mime = e->format(i)); ++i) { if (qstrcmp("application/x-qrichtext", mime) != 0) continue; str = QString::fromUtf8(e->encodedData(mime)); return true; } return false; } // do a regular text decode QString st = subtype; return Q3TextDrag::decode(e, str, st); } bool Q3RichTextDrag::canDecode(QMimeSource* e) { if (e->provides("application/x-qrichtext")) return true; return Q3TextDrag::canDecode(e); } const char* Q3RichTextDrag::format(int i) const { if (Q3TextDrag::format(i)) return Q3TextDrag::format(i); if (Q3TextDrag::format(i-1)) return "application/x-qrichtext"; return 0; } #endif static bool block_set_alignment = false; /*! \class Q3TextEdit \brief The Q3TextEdit widget provides a powerful single-page rich text editor. \compat \tableofcontents \section1 Introduction and Concepts Q3TextEdit is an advanced WYSIWYG viewer/editor supporting rich text formatting using HTML-style tags. It is optimized to handle large documents and to respond quickly to user input. Q3TextEdit has four modes of operation: \table \header \i Mode \i Command \i Notes \row \i Plain Text Editor \i setTextFormat(Qt::PlainText) \i Set text with setText(); text() returns plain text. Text attributes (e.g. colors) can be set, but plain text is always returned. \row \i Rich Text Editor \i setTextFormat(Qt::RichText) \i Set text with setText(); text() returns rich text. Rich text editing is fairly limited. You can't set margins or insert images for example (although you can read and correctly display files that have margins set and that include images). This mode is mostly useful for editing small amounts of rich text. \row \i Text Viewer \i setReadOnly(true) \i Set text with setText() or append() (which has no undo history so is faster and uses less memory); text() returns plain or rich text depending on the textFormat(). This mode can correctly display a large subset of HTML tags. \row \i Log Viewer \i setTextFormat(Qt::LogText) \i Append text using append(). The widget is set to be read only and rich text support is disabled although a few HTML tags (for color, bold, italic and underline) may be used. (See \link #logtextmode Qt::LogText mode\endlink for details.) \endtable Q3TextEdit can be used as a syntax highlighting editor when used in conjunction with QSyntaxHighlighter. We recommend that you always call setTextFormat() to set the mode you want to use. If you use Qt::AutoText then setText() and append() will try to determine whether the text they are given is plain text or rich text. If you use Qt::RichText then setText() and append() will assume that the text they are given is rich text. insert() simply inserts the text it is given. Q3TextEdit works on paragraphs and characters. A paragraph is a formatted string which is word-wrapped to fit into the width of the widget. By default when reading plain text, one newline signify a paragraph. A document consists of zero or more paragraphs, indexed from 0. Characters are indexed on a per-paragraph basis, also indexed from 0. The words in the paragraph are aligned in accordance with the paragraph's alignment(). Paragraphs are separated by hard line breaks. Each character within a paragraph has its own attributes, for example, font and color. The text edit documentation uses the following concepts: \list \i \e{current format} -- this is the format at the current cursor position, \e and it is the format of the selected text if any. \i \e{current paragraph} -- the paragraph which contains the cursor. \endlist Q3TextEdit can display images (using Q3MimeSourceFactory), lists and tables. If the text is too large to view within the text edit's viewport, scroll bars will appear. The text edit can load both plain text and HTML files (a subset of HTML 3.2 and 4). The rendering style and the set of valid tags are defined by a styleSheet(). Custom tags can be created and placed in a custom style sheet. Change the style sheet with \l{setStyleSheet()}; see Q3StyleSheet for details. The images identified by image tags are displayed if they can be interpreted using the text edit's \l{Q3MimeSourceFactory}; see setMimeSourceFactory(). If you want a text browser with more navigation use QTextBrowser. If you just need to display a small piece of rich text use QLabel or QSimpleRichText. If you create a new Q3TextEdit, and want to allow the user to edit rich text, call setTextFormat(Qt::RichText) to ensure that the text is treated as rich text. (Rich text uses HTML tags to set text formatting attributes. See Q3StyleSheet for information on the HTML tags that are supported.). If you don't call setTextFormat() explicitly the text edit will guess from the text itself whether it is rich text or plain text. This means that if the text looks like HTML or XML it will probably be interpreted as rich text, so you should call setTextFormat(Qt::PlainText) to preserve such text. Note that we do not intend to add a full-featured web browser widget to Qt (because that would easily double Qt's size and only a few applications would benefit from it). The rich text support in Qt is designed to provide a fast, portable and efficient way to add reasonable online help facilities to applications, and to provide a basis for rich text editors. \section1 Using Q3TextEdit as a Display Widget Q3TextEdit can display a large HTML subset, including tables and images. The text is set or replaced using setText() which deletes any existing text and replaces it with the text passed in the setText() call. If you call setText() with legacy HTML (with setTextFormat(Qt::RichText) in force), and then call text(), the text that is returned may have different markup, but will render the same. Text can be inserted with insert(), paste(), pasteSubType() and append(). Text that is appended does not go into the undo history; this makes append() faster and consumes less memory. Text can also be cut(). The entire text is deleted with clear() and the selected text is deleted with removeSelectedText(). Selected (marked) text can also be deleted with del() (which will delete the character to the right of the cursor if no text is selected). Loading and saving text is achieved using setText() and text(), for example: \snippet doc/src/snippets/code/src_qt3support_text_q3textedit.cpp 0 By default the text edit wraps words at whitespace to fit within the text edit widget. The setWordWrap() function is used to specify the kind of word wrap you want, or \c NoWrap if you don't want any wrapping. Call setWordWrap() to set a fixed pixel width \c FixedPixelWidth, or character column (e.g. 80 column) \c FixedColumnWidth with the pixels or columns specified with setWrapColumnOrWidth(). If you use word wrap to the widget's width \c WidgetWidth, you can specify whether to break on whitespace or anywhere with setWrapPolicy(). The background color is set differently than other widgets, using setPaper(). You specify a brush style which could be a plain color or a complex pixmap. Hypertext links are automatically underlined; this can be changed with setLinkUnderline(). The tab stop width is set with setTabStopWidth(). The zoomIn() and zoomOut() functions can be used to resize the text by increasing (decreasing for zoomOut()) the point size used. Images are not affected by the zoom functions. The lines() function returns the number of lines in the text and paragraphs() returns the number of paragraphs. The number of lines within a particular paragraph is returned by linesOfParagraph(). The length of the entire text in characters is returned by length(). You can scroll to an anchor in the text, e.g. \c{} with scrollToAnchor(). The find() function can be used to find and select a given string within the text. A read-only Q3TextEdit provides the same functionality as the (obsolete) QTextView. (QTextView is still supplied for compatibility with old code.) \section2 Read-only key bindings When Q3TextEdit is used read-only the key-bindings are limited to navigation, and text may only be selected with the mouse: \table \header \i Keypresses \i Action \row \i Up \i Move one line up \row \i Down \i Move one line down \row \i Left \i Move one character left \row \i Right \i Move one character right \row \i PageUp \i Move one (viewport) page up \row \i PageDown \i Move one (viewport) page down \row \i Home \i Move to the beginning of the text \row \i End \i Move to the end of the text \row \i Shift+Wheel \i Scroll the page horizontally (the Wheel is the mouse wheel) \row \i Ctrl+Wheel \i Zoom the text \endtable The text edit may be able to provide some meta-information. For example, the documentTitle() function will return the text from within HTML \c{} tags. The text displayed in a text edit has a \e context. The context is a path which the text edit's Q3MimeSourceFactory uses to resolve the locations of files and images. It is passed to the mimeSourceFactory() when quering data. (See Q3TextEdit() and \l{context()}.) \target logtextmode \section2 Using Q3TextEdit in Qt::LogText Mode Setting the text format to Qt::LogText puts the widget in a special mode which is optimized for very large texts. In this mode editing and rich text support are disabled (the widget is explicitly set to read-only mode). This allows the text to be stored in a different, more memory efficient manner. However, a certain degree of text formatting is supported through the use of formatting tags. A tag is delimited by \c < and \c {>}. The characters \c {<}, \c > and \c & are escaped by using \c {<}, \c {>} and \c {&}. A tag pair consists of a left and a right tag (or open/close tags). Left-tags mark the starting point for formatting, while right-tags mark the ending point. A right-tag always start with a \c / before the tag keyword. For example \c <b> and \c </b> are a tag pair. Tags can be nested, but they have to be closed in the same order as they are opened. For example, \c <b><u></u></b> is valid, while \c <b><u></b></u> will output an error message. By using tags it is possible to change the color, bold, italic and underline settings for a piece of text. A color can be specified by using the HTML font tag \c {<font color=colorname>}. The color name can be one of the color names from the X11 color database, or a RGB hex value (e.g \c {#00ff00}). Example of valid color tags: \c {<font color=red>}, \c{<font color="light blue">},\c {<font color="#223344">}. Bold, italic and underline settings can be specified by the tags \c {<b>}, \c <i> and \c {<u>}. Note that a tag does not necessarily have to be closed. A valid example: \snippet doc/src/snippets/code/src_qt3support_text_q3textedit.cpp 1 Stylesheets can also be used in Qt::LogText mode. To create and use a custom tag, you could do the following: \snippet doc/src/snippets/code/src_qt3support_text_q3textedit.cpp 2 Note that only the color, bold, underline and italic attributes of a Q3StyleSheetItem is used in Qt::LogText mode. Note that you can use setMaxLogLines() to limit the number of lines the widget can hold in Qt::LogText mode. There are a few things that you need to be aware of when the widget is in this mode: \list \i Functions that deal with rich text formatting and cursor movement will not work or return anything valid. \i Lines are equivalent to paragraphs. \endlist \section1 Using Q3TextEdit as an Editor All the information about using Q3TextEdit as a display widget also applies here. The current format's attributes are set with setItalic(), setBold(), setUnderline(), setFamily() (font family), setPointSize(), setColor() and setCurrentFont(). The current paragraph's alignment is set with setAlignment(). Use setSelection() to select text. The setSelectionAttributes() function is used to indicate how selected text should be displayed. Use hasSelectedText() to find out if any text is selected. The currently selected text's position is available using getSelection() and the selected text itself is returned by selectedText(). The selection can be copied to the clipboard with copy(), or cut to the clipboard with cut(). It can be deleted with removeSelectedText(). The entire text can be selected (or unselected) using selectAll(). Q3TextEdit supports multiple selections. Most of the selection functions operate on the default selection, selection 0. If the user presses a non-selecting key, e.g. a cursor key without also holding down Shift, all selections are cleared. Set and get the position of the cursor with setCursorPosition() and getCursorPosition() respectively. When the cursor is moved, the signals currentFontChanged(), currentColorChanged() and currentAlignmentChanged() are emitted to reflect the font, color and alignment at the new cursor position. If the text changes, the textChanged() signal is emitted, and if the user inserts a new line by pressing Return or Enter, returnPressed() is emitted. The isModified() function will return true if the text has been modified. Q3TextEdit provides command-based undo and redo. To set the depth of the command history use setUndoDepth() which defaults to 100 steps. To undo or redo the last operation call undo() or redo(). The signals undoAvailable() and redoAvailable() indicate whether the undo and redo operations can be executed. \section2 Editing key bindings The list of key-bindings which are implemented for editing: \table \header \i Keypresses \i Action \row \i Backspace \i Delete the character to the left of the cursor \row \i Delete \i Delete the character to the right of the cursor \row \i Ctrl+A \i Move the cursor to the beginning of the line \row \i Ctrl+B \i Move the cursor one character left \row \i Ctrl+C \i Copy the marked text to the clipboard (also Ctrl+Insert under Windows) \row \i Ctrl+D \i Delete the character to the right of the cursor \row \i Ctrl+E \i Move the cursor to the end of the line \row \i Ctrl+F \i Move the cursor one character right \row \i Ctrl+H \i Delete the character to the left of the cursor \row \i Ctrl+K \i Delete to end of line \row \i Ctrl+N \i Move the cursor one line down \row \i Ctrl+P \i Move the cursor one line up \row \i Ctrl+V \i Paste the clipboard text into line edit (also Shift+Insert under Windows) \row \i Ctrl+X \i Cut the marked text, copy to clipboard (also Shift+Delete under Windows) \row \i Ctrl+Z \i Undo the last operation \row \i Ctrl+Y \i Redo the last operation \row \i Left \i Move the cursor one character left \row \i Ctrl+Left \i Move the cursor one word left \row \i Right \i Move the cursor one character right \row \i Ctrl+Right \i Move the cursor one word right \row \i Up \i Move the cursor one line up \row \i Ctrl+Qt::Up \i Move the cursor one word up \row \i DownArrow \i Move the cursor one line down \row \i Ctrl+Down \i Move the cursor one word down \row \i PageUp \i Move the cursor one page up \row \i PageDown \i Move the cursor one page down \row \i Home \i Move the cursor to the beginning of the line \row \i Ctrl+Home \i Move the cursor to the beginning of the text \row \i End \i Move the cursor to the end of the line \row \i Ctrl+End \i Move the cursor to the end of the text \row \i Shift+Wheel \i Scroll the page horizontally (the Wheel is the mouse wheel) \row \i Ctrl+Wheel \i Zoom the text \endtable To select (mark) text hold down the Shift key whilst pressing one of the movement keystrokes, for example, \e{Shift+Right} will select the character to the right, and \e{Shift+Ctrl+Right} will select the word to the right, etc. By default the text edit widget operates in insert mode so all text that the user enters is inserted into the text edit and any text to the right of the cursor is moved out of the way. The mode can be changed to overwrite, where new text overwrites any text to the right of the cursor, using setOverwriteMode(). */ /*! \enum Q3TextEdit::AutoFormattingFlag \value AutoNone Do not perform any automatic formatting \value AutoBulletList Only automatically format bulletted lists \value AutoAll Apply all available autoformatting */ /*! \enum Q3TextEdit::KeyboardAction This enum is used by doKeyboardAction() to specify which action should be executed: \value ActionBackspace Delete the character to the left of the cursor. \value ActionDelete Delete the character to the right of the cursor. \value ActionReturn Split the paragraph at the cursor position. \value ActionKill If the cursor is not at the end of the paragraph, delete the text from the cursor position until the end of the paragraph. If the cursor is at the end of the paragraph, delete the hard line break at the end of the paragraph: this will cause this paragraph to be joined with the following paragraph. \value ActionWordBackspace Delete the word to the left of the cursor position. \value ActionWordDelete Delete the word to the right of the cursor position */ /*! \enum Q3TextEdit::VerticalAlignment This enum is used to set the vertical alignment of the text. \value AlignNormal Normal alignment \value AlignSuperScript Superscript \value AlignSubScript Subscript */ /*! \enum Q3TextEdit::TextInsertionFlags \internal \value RedoIndentation \value CheckNewLines \value RemoveSelected */ /*! \fn void Q3TextEdit::copyAvailable(bool yes) This signal is emitted when text is selected or de-selected in the text edit. When text is selected this signal will be emitted with \a yes set to true. If no text has been selected or if the selected text is de-selected this signal is emitted with \a yes set to false. If \a yes is true then copy() can be used to copy the selection to the clipboard. If \a yes is false then copy() does nothing. \sa selectionChanged() */ /*! \fn void Q3TextEdit::textChanged() This signal is emitted whenever the text in the text edit changes. \sa setText() append() */ /*! \fn void Q3TextEdit::selectionChanged() This signal is emitted whenever the selection changes. \sa setSelection() copyAvailable() */ /*! \fn Q3TextDocument *Q3TextEdit::document() const \internal This function returns the Q3TextDocument which is used by the text edit. */ /*! \fn void Q3TextEdit::setDocument(Q3TextDocument *doc) \internal This function sets the Q3TextDocument which should be used by the text edit to \a doc. This can be used, for example, if you want to display a document using multiple views. You would create a Q3TextDocument and set it to the text edits which should display it. You would need to connect to the textChanged() and selectionChanged() signals of all the text edits and update them all accordingly (preferably with a slight delay for efficiency reasons). */ /*! \enum Q3TextEdit::CursorAction This enum is used by moveCursor() to specify in which direction the cursor should be moved: \value MoveBackward Moves the cursor one character backward \value MoveWordBackward Moves the cursor one word backward \value MoveForward Moves the cursor one character forward \value MoveWordForward Moves the cursor one word forward \value MoveUp Moves the cursor up one line \value MoveDown Moves the cursor down one line \value MoveLineStart Moves the cursor to the beginning of the line \value MoveLineEnd Moves the cursor to the end of the line \value MoveHome Moves the cursor to the beginning of the document \value MoveEnd Moves the cursor to the end of the document \value MovePgUp Moves the cursor one viewport page up \value MovePgDown Moves the cursor one viewport page down */ /*! \property Q3TextEdit::overwriteMode \brief the text edit's overwrite mode If false (the default) characters entered by the user are inserted with any characters to the right being moved out of the way. If true, the editor is in overwrite mode, i.e. characters entered by the user overwrite any characters to the right of the cursor position. */ /*! \fn void Q3TextEdit::setCurrentFont(const QFont &f) Sets the font of the current format to \a f. If the widget is in Qt::LogText mode this function will do nothing. Use setFont() instead. \sa currentFont() setPointSize() setFamily() */ /*! \property Q3TextEdit::undoDepth \brief the depth of the undo history The maximum number of steps in the undo/redo history. The default is 100. \sa undo() redo() */ /*! \fn void Q3TextEdit::undoAvailable(bool yes) This signal is emitted when the availability of undo changes. If \a yes is true, then undo() will work until undoAvailable(false) is next emitted. \sa undo() undoDepth() */ /*! \fn void Q3TextEdit::modificationChanged(bool m) This signal is emitted when the modification status of the document has changed. If \a m is true, the document was modified, otherwise the modification state has been reset to unmodified. \sa modified */ /*! \fn void Q3TextEdit::redoAvailable(bool yes) This signal is emitted when the availability of redo changes. If \a yes is true, then redo() will work until redoAvailable(false) is next emitted. \sa redo() undoDepth() */ /*! \fn void Q3TextEdit::currentFontChanged(const QFont &f) This signal is emitted if the font of the current format has changed. The new font is \a f. \sa setCurrentFont() */ /*! \fn void Q3TextEdit::currentColorChanged(const QColor &c) This signal is emitted if the color of the current format has changed. The new color is \a c. \sa setColor() */ /*! \fn void Q3TextEdit::currentVerticalAlignmentChanged(Q3TextEdit::VerticalAlignment a) This signal is emitted if the vertical alignment of the current format has changed. The new vertical alignment is \a a. */ /*! \fn void Q3TextEdit::currentAlignmentChanged(int a) This signal is emitted if the alignment of the current paragraph has changed. The new alignment is \a a. \sa setAlignment() */ /*! \fn void Q3TextEdit::cursorPositionChanged(Q3TextCursor *c) \internal */ /*! \fn void Q3TextEdit::cursorPositionChanged(int para, int pos) \overload This signal is emitted if the position of the cursor has changed. \a para contains the paragraph index and \a pos contains the character position within the paragraph. \sa setCursorPosition() */ /*! \fn void Q3TextEdit::clicked(int para, int pos) This signal is emitted when the mouse is clicked on the paragraph \a para at character position \a pos. \sa doubleClicked() */ /*! \fn void Q3TextEdit::doubleClicked(int para, int pos) This signal is emitted when the mouse is double-clicked on the paragraph \a para at character position \a pos. \sa clicked() */ /*! \fn void Q3TextEdit::returnPressed() This signal is emitted if the user pressed the Return or the Enter key. */ /*! \fn Q3TextCursor *Q3TextEdit::textCursor() const Returns the text edit's text cursor. \warning Q3TextCursor is not in the public API, but in special circumstances you might wish to use it. */ /*! Constructs an empty Q3TextEdit called \a name, with parent \a parent. */ Q3TextEdit::Q3TextEdit(QWidget *parent, const char *name) : Q3ScrollView(parent, name, Qt::WStaticContents | Qt::WNoAutoErase), doc(new Q3TextDocument(0)), undoRedoInfo(doc) { init(); } /*! Constructs a Q3TextEdit called \a name, with parent \a parent. The text edit will display the text \a text using context \a context. The \a context is a path which the text edit's Q3MimeSourceFactory uses to resolve the locations of files and images. It is passed to the mimeSourceFactory() when quering data. For example if the text contains an image tag, \c{<img src="image.png">}, and the context is "path/to/look/in", the Q3MimeSourceFactory will try to load the image from "path/to/look/in/image.png". If the tag was \c{<img src="/image.png">}, the context will not be used (because Q3MimeSourceFactory recognizes that we have used an absolute path) and will try to load "/image.png". The context is applied in exactly the same way to \e hrefs, for example, \c{<a href="target.html">Target</a>}, would resolve to "path/to/look/in/target.html". */ Q3TextEdit::Q3TextEdit(const QString& text, const QString& context, QWidget *parent, const char *name) : Q3ScrollView(parent, name, Qt::WStaticContents | Qt::WNoAutoErase), doc(new Q3TextDocument(0)), undoRedoInfo(doc) { init(); setText(text, context); } /*! Destructor. */ Q3TextEdit::~Q3TextEdit() { delete undoRedoInfo.d; undoRedoInfo.d = 0; delete cursor; delete doc; #ifdef QT_TEXTEDIT_OPTIMIZATION delete d->od; #endif delete d; } void Q3TextEdit::init() { d = new Q3TextEditPrivate; doc->formatCollection()->setPaintDevice(this); undoEnabled = true; readonly = true; setReadOnly(false); setFrameStyle(LineEditPanel | Sunken); connect(doc, SIGNAL(minimumWidthChanged(int)), this, SLOT(documentWidthChanged(int))); mousePressed = false; inDoubleClick = false; modified = false; mightStartDrag = false; onLink.clear(); d->onName.clear(); overWrite = false; wrapMode = WidgetWidth; wrapWidth = -1; wPolicy = AtWhiteSpace; inDnD = false; doc->setFormatter(new Q3TextFormatterBreakWords); QFont f = Q3ScrollView::font(); if (f.kerning()) f.setKerning(false); doc->formatCollection()->defaultFormat()->setFont(f); doc->formatCollection()->defaultFormat()->setColor(palette().color(QPalette::Text)); currentFormat = doc->formatCollection()->defaultFormat(); currentAlignment = Qt::AlignAuto; setBackgroundRole(QPalette::Base); viewport()->setBackgroundRole(QPalette::Base); viewport()->setAcceptDrops(true); resizeContents(0, doc->lastParagraph() ? (doc->lastParagraph()->paragId() + 1) * doc->formatCollection()->defaultFormat()->height() : 0); setAttribute(Qt::WA_KeyCompression, true); viewport()->setMouseTracking(true); #ifndef QT_NO_CURSOR viewport()->setCursor(isReadOnly() ? Qt::ArrowCursor : Qt::IBeamCursor); #endif cursor = new Q3TextCursor(doc); formatTimer = new QTimer(this); connect(formatTimer, SIGNAL(timeout()), this, SLOT(formatMore())); lastFormatted = doc->firstParagraph(); scrollTimer = new QTimer(this); connect(scrollTimer, SIGNAL(timeout()), this, SLOT(autoScrollTimerDone())); interval = 0; changeIntervalTimer = new QTimer(this); connect(changeIntervalTimer, SIGNAL(timeout()), this, SLOT(doChangeInterval())); cursorVisible = true; blinkTimer = new QTimer(this); connect(blinkTimer, SIGNAL(timeout()), this, SLOT(blinkCursor())); #ifndef QT_NO_DRAGANDDROP dragStartTimer = new QTimer(this); connect(dragStartTimer, SIGNAL(timeout()), this, SLOT(startDrag())); #endif d->trippleClickTimer = new QTimer(this); formatMore(); blinkCursorVisible = false; viewport()->setFocusProxy(this); viewport()->setFocusPolicy(Qt::WheelFocus); setFocusPolicy(Qt::WheelFocus); setInputMethodEnabled(true); viewport()->installEventFilter(this); connect(this, SIGNAL(horizontalSliderReleased()), this, SLOT(sliderReleased())); connect(this, SIGNAL(verticalSliderReleased()), this, SLOT(sliderReleased())); installEventFilter(this); } void Q3TextEdit::paintDocument(bool drawAll, QPainter *p, int cx, int cy, int cw, int ch) { #ifdef QT_TEXTEDIT_OPTIMIZATION Q_ASSERT(!d->optimMode); if (d->optimMode) return; #endif bool drawCur = blinkCursorVisible && (hasFocus() || viewport()->hasFocus()); if ((hasSelectedText() && !style()->styleHint(QStyle::SH_BlinkCursorWhenTextSelected, 0, this)) || isReadOnly() || !cursorVisible) drawCur = false; QPalette pal = palette(); if (doc->paper()) pal.setBrush(QPalette::Base, *doc->paper()); if (contentsY() < doc->y()) { p->fillRect(contentsX(), contentsY(), visibleWidth(), doc->y(), pal.base()); } if (drawAll && doc->width() - contentsX() < cx + cw) { p->fillRect(doc->width() - contentsX(), cy, cx + cw - doc->width() + contentsX(), ch, pal.base()); } p->setBrushOrigin(-contentsX(), -contentsY()); lastFormatted = doc->draw(p, cx, cy, cw, ch, pal, !drawAll, drawCur, cursor); if (lastFormatted == doc->lastParagraph()) resizeContents(contentsWidth(), doc->height()); if (contentsHeight() < visibleHeight() && (!doc->lastParagraph() || doc->lastParagraph()->isValid()) && drawAll) p->fillRect(0, contentsHeight(), visibleWidth(), visibleHeight() - contentsHeight(), pal.base()); } /*! \reimp */ void Q3TextEdit::drawContents(QPainter *p, int cx, int cy, int cw, int ch) { #ifdef QT_TEXTEDIT_OPTIMIZATION if (d->optimMode) { optimDrawContents(p, cx, cy, cw, ch); return; } #endif paintDocument(true, p, cx, cy, cw, ch); int v; p->setPen(palette().color(foregroundRole())); if (document()->isPageBreakEnabled() && (v = document()->flow()->pageSize()) > 0) { int l = int(cy / v) * v; while (l < cy + ch) { p->drawLine(cx, l, cx + cw - 1, l); l += v; } } } /*! \internal */ void Q3TextEdit::drawContents(QPainter *p) { if (horizontalScrollBar()->isVisible() && verticalScrollBar()->isVisible()) { const QRect verticalRect = verticalScrollBar()->geometry(); const QRect horizontalRect = horizontalScrollBar()->geometry(); QRect cornerRect; cornerRect.setTop(verticalRect.bottom()); cornerRect.setBottom(horizontalRect.bottom()); cornerRect.setLeft(verticalRect.left()); cornerRect.setRight(verticalRect.right()); p->fillRect(cornerRect, palette().background()); } } /*! \reimp */ bool Q3TextEdit::event(QEvent *e) { if (e->type() == QEvent::AccelOverride && !isReadOnly()) { QKeyEvent* ke = (QKeyEvent*) e; switch(ke->state()) { case Qt::NoButton: case Qt::Keypad: case Qt::ShiftButton: if (ke->key() < Qt::Key_Escape) { ke->accept(); } else { switch (ke->key()) { case Qt::Key_Return: case Qt::Key_Enter: case Qt::Key_Delete: case Qt::Key_Home: case Qt::Key_End: case Qt::Key_Backspace: case Qt::Key_Left: case Qt::Key_Right: ke->accept(); default: break; } } break; case Qt::ControlButton: case Qt::ControlButton|Qt::ShiftButton: case Qt::ControlButton|Qt::Keypad: case Qt::ControlButton|Qt::ShiftButton|Qt::Keypad: switch (ke->key()) { case Qt::Key_Tab: case Qt::Key_Backtab: ke->ignore(); break; // Those are too frequently used for application functionality /* case Qt::Key_A: case Qt::Key_B: case Qt::Key_D: case Qt::Key_E: case Qt::Key_F: case Qt::Key_H: case Qt::Key_I: case Qt::Key_K: case Qt::Key_N: case Qt::Key_P: case Qt::Key_T: */ case Qt::Key_C: case Qt::Key_V: case Qt::Key_X: case Qt::Key_Y: case Qt::Key_Z: case Qt::Key_Left: case Qt::Key_Right: case Qt::Key_Up: case Qt::Key_Down: case Qt::Key_Home: case Qt::Key_End: #if defined (Q_WS_WIN) case Qt::Key_Insert: case Qt::Key_Delete: #endif ke->accept(); default: break; } break; default: switch (ke->key()) { #if defined (Q_WS_WIN) case Qt::Key_Insert: ke->accept(); #endif default: break; } break; } } if (e->type() == QEvent::Show) { if ( #ifdef QT_TEXTEDIT_OPTIMIZATION !d->optimMode && #endif d->ensureCursorVisibleInShowEvent ) { ensureCursorVisible(); d->ensureCursorVisibleInShowEvent = false; } if (!d->scrollToAnchor.isEmpty()) { scrollToAnchor(d->scrollToAnchor); d->scrollToAnchor.clear(); } } return QWidget::event(e); } /*! Processes the key event, \a e. By default key events are used to provide keyboard navigation and text editing. */ void Q3TextEdit::keyPressEvent(QKeyEvent *e) { changeIntervalTimer->stop(); interval = 10; bool unknownKey = false; if (isReadOnly()) { if (!handleReadOnlyKeyEvent(e)) Q3ScrollView::keyPressEvent(e); changeIntervalTimer->start(100, true); return; } bool selChanged = false; for (int i = 1; i < doc->numSelections(); ++i) // start with 1 as we don't want to remove the Standard-Selection selChanged = doc->removeSelection(i) || selChanged; if (selChanged) { cursor->paragraph()->document()->nextDoubleBuffered = true; repaintChanged(); } bool clearUndoRedoInfo = true; switch (e->key()) { case Qt::Key_Left: case Qt::Key_Right: { // a bit hacky, but can't change this without introducing new enum values for move and keeping the // correct semantics and movement for BiDi and non BiDi text. CursorAction a; if (cursor->paragraph()->string()->isRightToLeft() == (e->key() == Qt::Key_Right)) a = e->state() & Qt::ControlButton ? MoveWordBackward : MoveBackward; else a = e->state() & Qt::ControlButton ? MoveWordForward : MoveForward; moveCursor(a, e->state() & Qt::ShiftButton); break; } case Qt::Key_Up: moveCursor(e->state() & Qt::ControlButton ? MovePgUp : MoveUp, e->state() & Qt::ShiftButton); break; case Qt::Key_Down: moveCursor(e->state() & Qt::ControlButton ? MovePgDown : MoveDown, e->state() & Qt::ShiftButton); break; case Qt::Key_Home: moveCursor(e->state() & Qt::ControlButton ? MoveHome : MoveLineStart, e->state() & Qt::ShiftButton); break; case Qt::Key_End: moveCursor(e->state() & Qt::ControlButton ? MoveEnd : MoveLineEnd, e->state() & Qt::ShiftButton); break; case Qt::Key_Prior: moveCursor(MovePgUp, e->state() & Qt::ShiftButton); break; case Qt::Key_Next: moveCursor(MovePgDown, e->state() & Qt::ShiftButton); break; case Qt::Key_Return: case Qt::Key_Enter: if (doc->hasSelection(Q3TextDocument::Standard, false)) removeSelectedText(); if (textFormat() == Qt::RichText && (e->state() & Qt::ControlButton)) { // Ctrl-Enter inserts a line break in rich text mode insert(QString(QChar(QChar::LineSeparator)), true, false); } else { #ifndef QT_NO_CURSOR viewport()->setCursor(isReadOnly() ? Qt::ArrowCursor : Qt::IBeamCursor); #endif clearUndoRedoInfo = false; doKeyboardAction(ActionReturn); emit returnPressed(); } break; case Qt::Key_Delete: #if defined (Q_WS_WIN) if (e->state() & Qt::ShiftButton) { cut(); break; } else #endif if (doc->hasSelection(Q3TextDocument::Standard, true)) { removeSelectedText(); break; } doKeyboardAction(e->state() & Qt::ControlButton ? ActionWordDelete : ActionDelete); clearUndoRedoInfo = false; break; case Qt::Key_Insert: if (e->state() & Qt::ShiftButton) paste(); #if defined (Q_WS_WIN) else if (e->state() & Qt::ControlButton) copy(); #endif else setOverwriteMode(!isOverwriteMode()); break; case Qt::Key_Backspace: #if defined (Q_WS_WIN) if (e->state() & Qt::AltButton) { if (e->state() & Qt::ControlButton) { break; } else if (e->state() & Qt::ShiftButton) { redo(); break; } else { undo(); break; } } else #endif if (doc->hasSelection(Q3TextDocument::Standard, true)) { removeSelectedText(); break; } doKeyboardAction(e->state() & Qt::ControlButton ? ActionWordBackspace : ActionBackspace); clearUndoRedoInfo = false; break; case Qt::Key_F16: // Copy key on Sun keyboards copy(); break; case Qt::Key_F18: // Paste key on Sun keyboards paste(); break; case Qt::Key_F20: // Cut key on Sun keyboards cut(); break; case Qt::Key_Direction_L: if (doc->textFormat() == Qt::PlainText) { // change the whole doc Q3TextParagraph *p = doc->firstParagraph(); while (p) { p->setDirection(QChar::DirL); p->setAlignment(Qt::AlignLeft); p->invalidate(0); p = p->next(); } } else { if (!cursor->paragraph() || cursor->paragraph()->direction() == QChar::DirL) return; cursor->paragraph()->setDirection(QChar::DirL); if (cursor->paragraph()->length() <= 1&& ((cursor->paragraph()->alignment() & (Qt::AlignLeft | Qt::AlignRight)) != 0)) setAlignment(Qt::AlignLeft); } repaintChanged(); break; case Qt::Key_Direction_R: if (doc->textFormat() == Qt::PlainText) { // change the whole doc Q3TextParagraph *p = doc->firstParagraph(); while (p) { p->setDirection(QChar::DirR); p->setAlignment(Qt::AlignRight); p->invalidate(0); p = p->next(); } } else { if (!cursor->paragraph() || cursor->paragraph()->direction() == QChar::DirR) return; cursor->paragraph()->setDirection(QChar::DirR); if (cursor->paragraph()->length() <= 1&& ((cursor->paragraph()->alignment() & (Qt::AlignLeft | Qt::AlignRight)) != 0)) setAlignment(Qt::AlignRight); } repaintChanged(); break; default: { unsigned char ascii = e->text().length() ? e->text().unicode()->latin1() : 0; if (e->text().length() && ((!(e->state() & Qt::ControlButton) && #ifndef Q_OS_MAC !(e->state() & Qt::AltButton) && #endif !(e->state() & Qt::MetaButton)) || (((e->state() & (Qt::ControlButton | Qt::AltButton))) == (Qt::ControlButton|Qt::AltButton))) && (!ascii || ascii >= 32 || e->text() == QString(QLatin1Char('\t')))) { clearUndoRedoInfo = false; if (e->key() == Qt::Key_Tab) { if (d->tabChangesFocus) { e->ignore(); break; } if (textFormat() == Qt::RichText && cursor->index() == 0 && (cursor->paragraph()->isListItem() || cursor->paragraph()->listDepth())) { clearUndoRedo(); undoRedoInfo.type = UndoRedoInfo::Style; undoRedoInfo.id = cursor->paragraph()->paragId(); undoRedoInfo.eid = undoRedoInfo.id; undoRedoInfo.styleInformation = Q3TextStyleCommand::readStyleInformation(doc, undoRedoInfo.id, undoRedoInfo.eid); cursor->paragraph()->setListDepth(cursor->paragraph()->listDepth() +1); clearUndoRedo(); drawCursor(false); repaintChanged(); drawCursor(true); break; } } else if (e->key() == Qt::Key_BackTab) { if (d->tabChangesFocus) { e->ignore(); break; } } if ((autoFormatting() & AutoBulletList) && textFormat() == Qt::RichText && cursor->index() == 0 && !cursor->paragraph()->isListItem() && (e->text()[0] == QLatin1Char('-') || e->text()[0] == QLatin1Char('*'))) { clearUndoRedo(); undoRedoInfo.type = UndoRedoInfo::Style; undoRedoInfo.id = cursor->paragraph()->paragId(); undoRedoInfo.eid = undoRedoInfo.id; undoRedoInfo.styleInformation = Q3TextStyleCommand::readStyleInformation(doc, undoRedoInfo.id, undoRedoInfo.eid); setParagType(Q3StyleSheetItem::DisplayListItem, Q3StyleSheetItem::ListDisc); clearUndoRedo(); drawCursor(false); repaintChanged(); drawCursor(true); break; } if (overWrite && !cursor->atParagEnd() && !doc->hasSelection(Q3TextDocument::Standard)) { doKeyboardAction(ActionDelete); clearUndoRedoInfo = false; } QString t = e->text(); insert(t, true, false); break; } else if (e->state() & Qt::ControlButton) { switch (e->key()) { case Qt::Key_C: case Qt::Key_F16: // Copy key on Sun keyboards copy(); break; case Qt::Key_V: paste(); break; case Qt::Key_X: cut(); break; case Qt::Key_I: case Qt::Key_T: case Qt::Key_Tab: if (!d->tabChangesFocus) indent(); break; case Qt::Key_A: #if defined(Q_WS_X11) moveCursor(MoveLineStart, e->state() & Qt::ShiftButton); #else selectAll(true); #endif break; case Qt::Key_B: moveCursor(MoveBackward, e->state() & Qt::ShiftButton); break; case Qt::Key_F: moveCursor(MoveForward, e->state() & Qt::ShiftButton); break; case Qt::Key_D: if (doc->hasSelection(Q3TextDocument::Standard)) { removeSelectedText(); break; } doKeyboardAction(ActionDelete); clearUndoRedoInfo = false; break; case Qt::Key_H: if (doc->hasSelection(Q3TextDocument::Standard)) { removeSelectedText(); break; } if (!cursor->paragraph()->prev() && cursor->atParagStart()) break; doKeyboardAction(ActionBackspace); clearUndoRedoInfo = false; break; case Qt::Key_E: moveCursor(MoveLineEnd, e->state() & Qt::ShiftButton); break; case Qt::Key_N: moveCursor(MoveDown, e->state() & Qt::ShiftButton); break; case Qt::Key_P: moveCursor(MoveUp, e->state() & Qt::ShiftButton); break; case Qt::Key_Z: if(e->state() & Qt::ShiftButton) redo(); else undo(); break; case Qt::Key_Y: redo(); break; case Qt::Key_K: doKeyboardAction(ActionKill); break; #if defined(Q_WS_WIN) case Qt::Key_Insert: copy(); break; case Qt::Key_Delete: del(); break; #endif default: unknownKey = false; break; } } else { unknownKey = true; } } } emit cursorPositionChanged(cursor); emit cursorPositionChanged(cursor->paragraph()->paragId(), cursor->index()); if (clearUndoRedoInfo) clearUndoRedo(); changeIntervalTimer->start(100, true); if (unknownKey) e->ignore(); } /*! \reimp */ void Q3TextEdit::inputMethodEvent(QInputMethodEvent *e) { if (isReadOnly()) { e->ignore(); return; } if (hasSelectedText()) removeSelectedText(); clearUndoRedo(); undoRedoInfo.type = UndoRedoInfo::IME; bool oldupdate = updatesEnabled(); if (oldupdate) setUpdatesEnabled(false); bool sigs_blocked = signalsBlocked(); blockSignals(true); const int preeditSelectionBase = 31900; for (int i = 0; i < d->numPreeditSelections; ++i) doc->removeSelection(preeditSelectionBase + i); d->numPreeditSelections = 0; if (d->preeditLength > 0 && cursor->paragraph()) { cursor->setIndex(d->preeditStart); cursor->paragraph()->remove(d->preeditStart, d->preeditLength); d->preeditStart = d->preeditLength = -1; } if (!e->commitString().isEmpty() || e->replacementLength()) { int c = cursor->index(); // cursor position after insertion of commit string if (e->replacementStart() <= 0) c += e->commitString().length() + qMin(-e->replacementStart(), e->replacementLength()); cursor->setIndex(cursor->index() + e->replacementStart()); doc->setSelectionStart(Q3TextDocument::Standard, *cursor); cursor->setIndex(cursor->index() + e->replacementLength()); doc->setSelectionEnd(Q3TextDocument::Standard, *cursor); removeSelectedText(); if (undoRedoInfo.type == UndoRedoInfo::IME) undoRedoInfo.type = UndoRedoInfo::Invalid; insert(e->commitString()); undoRedoInfo.type = UndoRedoInfo::IME; cursor->setIndex(c); } if (!e->preeditString().isEmpty()) { d->preeditStart = cursor->index(); d->preeditLength = e->preeditString().length(); insert(e->preeditString()); cursor->setIndex(d->preeditStart); Q3TextCursor c = *cursor; for (int i = 0; i < e->attributes().size(); ++i) { const QInputMethodEvent::Attribute &a = e->attributes().at(i); if (a.type == QInputMethodEvent::Cursor) cursor->setIndex(cursor->index() + a.start); else if (a.type != QInputMethodEvent::TextFormat) continue; QTextCharFormat f = qvariant_cast<QTextFormat>(a.value).toCharFormat(); if (f.isValid()) { Q3TextCursor c2 = c; c2.setIndex(c.index() + a.start); doc->setSelectionStart(preeditSelectionBase + d->numPreeditSelections, c2); c2.setIndex(c.index() + a.start + a.length); doc->setSelectionEnd(preeditSelectionBase + d->numPreeditSelections, c2); QColor c = f.hasProperty(QTextFormat::BackgroundBrush) ? f.background().color() : QColor(); doc->setSelectionColor(preeditSelectionBase + d->numPreeditSelections, c); c = f.hasProperty(QTextFormat::ForegroundBrush) ? f.foreground().color() : QColor(); doc->setSelectionTextColor(preeditSelectionBase + d->numPreeditSelections, c); if (f.fontUnderline()) { Q3TextParagraph *par = cursor->paragraph(); Q3TextFormat f(*par->string()->at(d->preeditStart).format()); f.setUnderline(true); Q3TextFormat *f2 = doc->formatCollection()->format(&f); par->setFormat(d->preeditStart + a.start, a.length, f2); } ++d->numPreeditSelections; } } } else { undoRedoInfo.type = UndoRedoInfo::Invalid; } blockSignals(sigs_blocked); if (oldupdate) setUpdatesEnabled(true); if (!e->commitString().isEmpty()) emit textChanged(); repaintChanged(); } static bool qtextedit_ignore_readonly = false; /*! Executes keyboard action \a action. This is normally called by a key event handler. */ void Q3TextEdit::doKeyboardAction(Q3TextEdit::KeyboardAction action) { if (isReadOnly() && !qtextedit_ignore_readonly) return; if (cursor->nestedDepth() != 0) return; lastFormatted = cursor->paragraph(); drawCursor(false); bool doUpdateCurrentFormat = true; switch (action) { case ActionWordDelete: case ActionDelete: if (action == ActionDelete && !cursor->atParagEnd()) { if (undoEnabled) { checkUndoRedoInfo(UndoRedoInfo::Delete); if (!undoRedoInfo.valid()) { undoRedoInfo.id = cursor->paragraph()->paragId(); undoRedoInfo.index = cursor->index(); undoRedoInfo.d->text.clear(); } int idx = cursor->index(); do { undoRedoInfo.d->text.insert(undoRedoInfo.d->text.length(), cursor->paragraph()->at(idx++), true); } while (!cursor->paragraph()->string()->validCursorPosition(idx)); } cursor->remove(); } else { clearUndoRedo(); doc->setSelectionStart(Q3TextDocument::Temp, *cursor); if (action == ActionWordDelete && !cursor->atParagEnd()) { cursor->gotoNextWord(); } else { cursor->gotoNextLetter(); } doc->setSelectionEnd(Q3TextDocument::Temp, *cursor); removeSelectedText(Q3TextDocument::Temp); } break; case ActionWordBackspace: case ActionBackspace: if (textFormat() == Qt::RichText && (cursor->paragraph()->isListItem() || cursor->paragraph()->listDepth()) && cursor->index() == 0) { if (undoEnabled) { clearUndoRedo(); undoRedoInfo.type = UndoRedoInfo::Style; undoRedoInfo.id = cursor->paragraph()->paragId(); undoRedoInfo.eid = undoRedoInfo.id; undoRedoInfo.styleInformation = Q3TextStyleCommand::readStyleInformation(doc, undoRedoInfo.id, undoRedoInfo.eid); } int ldepth = cursor->paragraph()->listDepth(); if (cursor->paragraph()->isListItem() && ldepth == 1) { cursor->paragraph()->setListItem(false); } else if (qMax(ldepth, 1) == 1) { cursor->paragraph()->setListItem(false); cursor->paragraph()->setListDepth(0); } else { cursor->paragraph()->setListDepth(ldepth - 1); } clearUndoRedo(); lastFormatted = cursor->paragraph(); repaintChanged(); drawCursor(true); return; } if (action == ActionBackspace && !cursor->atParagStart()) { if (undoEnabled) { checkUndoRedoInfo(UndoRedoInfo::Delete); if (!undoRedoInfo.valid()) { undoRedoInfo.id = cursor->paragraph()->paragId(); undoRedoInfo.index = cursor->index(); undoRedoInfo.d->text.clear(); } undoRedoInfo.d->text.insert(0, cursor->paragraph()->at(cursor->index()-1), true); undoRedoInfo.index = cursor->index()-1; } cursor->removePreviousChar(); lastFormatted = cursor->paragraph(); } else if (cursor->paragraph()->prev() || (action == ActionWordBackspace && !cursor->atParagStart())) { clearUndoRedo(); doc->setSelectionStart(Q3TextDocument::Temp, *cursor); if (action == ActionWordBackspace && !cursor->atParagStart()) { cursor->gotoPreviousWord(); } else { cursor->gotoPreviousLetter(); } doc->setSelectionEnd(Q3TextDocument::Temp, *cursor); removeSelectedText(Q3TextDocument::Temp); } break; case ActionReturn: if (undoEnabled) { checkUndoRedoInfo(UndoRedoInfo::Return); if (!undoRedoInfo.valid()) { undoRedoInfo.id = cursor->paragraph()->paragId(); undoRedoInfo.index = cursor->index(); undoRedoInfo.d->text.clear(); } undoRedoInfo.d->text += QString(QLatin1Char('\n')); } cursor->splitAndInsertEmptyParagraph(); if (cursor->paragraph()->prev()) { lastFormatted = cursor->paragraph()->prev(); lastFormatted->invalidate(0); } doUpdateCurrentFormat = false; break; case ActionKill: clearUndoRedo(); doc->setSelectionStart(Q3TextDocument::Temp, *cursor); if (cursor->atParagEnd()) cursor->gotoNextLetter(); else cursor->setIndex(cursor->paragraph()->length() - 1); doc->setSelectionEnd(Q3TextDocument::Temp, *cursor); removeSelectedText(Q3TextDocument::Temp); break; } formatMore(); repaintChanged(); ensureCursorVisible(); drawCursor(true); if (doUpdateCurrentFormat) updateCurrentFormat(); setModified(); emit textChanged(); } void Q3TextEdit::readFormats(Q3TextCursor &c1, Q3TextCursor &c2, Q3TextString &text, bool fillStyles) { #ifndef QT_NO_DATASTREAM QDataStream styleStream(&undoRedoInfo.styleInformation, IO_WriteOnly); #endif c2.restoreState(); c1.restoreState(); int lastIndex = text.length(); if (c1.paragraph() == c2.paragraph()) { for (int i = c1.index(); i < c2.index(); ++i) text.insert(lastIndex + i - c1.index(), c1.paragraph()->at(i), true); #ifndef QT_NO_DATASTREAM if (fillStyles) { styleStream << (int) 1; c1.paragraph()->writeStyleInformation(styleStream); } #endif } else { int i; for (i = c1.index(); i < c1.paragraph()->length()-1; ++i) text.insert(lastIndex++, c1.paragraph()->at(i), true); int num = 2; // start and end, being different text += QString(QLatin1Char('\n')); lastIndex++; if (c1.paragraph()->next() != c2.paragraph()) { num += text.appendParagraphs(c1.paragraph()->next(), c2.paragraph()); lastIndex = text.length(); } for (i = 0; i < c2.index(); ++i) text.insert(i + lastIndex, c2.paragraph()->at(i), true); #ifndef QT_NO_DATASTREAM if (fillStyles) { styleStream << num; for (Q3TextParagraph *p = c1.paragraph(); --num >= 0; p = p->next()) p->writeStyleInformation(styleStream); } #endif } } /*! Removes the selection \a selNum (by default 0). This does not remove the selected text. \sa removeSelectedText() */ void Q3TextEdit::removeSelection(int selNum) { doc->removeSelection(selNum); repaintChanged(); } /*! Deletes the text of selection \a selNum (by default, the default selection, 0). If there is no selected text nothing happens. \sa selectedText removeSelection() */ void Q3TextEdit::removeSelectedText(int selNum) { Q3TextCursor c1 = doc->selectionStartCursor(selNum); c1.restoreState(); Q3TextCursor c2 = doc->selectionEndCursor(selNum); c2.restoreState(); // ### no support for editing tables yet, plus security for broken selections if (c1.nestedDepth() || c2.nestedDepth()) return; for (int i = 0; i < (int)doc->numSelections(); ++i) { if (i == selNum) continue; doc->removeSelection(i); } drawCursor(false); if (undoEnabled) { checkUndoRedoInfo(UndoRedoInfo::RemoveSelected); if (!undoRedoInfo.valid()) { doc->selectionStart(selNum, undoRedoInfo.id, undoRedoInfo.index); undoRedoInfo.d->text.clear(); } readFormats(c1, c2, undoRedoInfo.d->text, true); } doc->removeSelectedText(selNum, cursor); if (cursor->isValid()) { lastFormatted = 0; // make sync a noop ensureCursorVisible(); lastFormatted = cursor->paragraph(); formatMore(); repaintContents(); ensureCursorVisible(); drawCursor(true); clearUndoRedo(); #if defined(Q_WS_WIN) // there seems to be a problem with repainting or erasing the area // of the scrollview which is not the contents on windows if (contentsHeight() < visibleHeight()) viewport()->repaint(0, contentsHeight(), visibleWidth(), visibleHeight() - contentsHeight()); #endif #ifndef QT_NO_CURSOR viewport()->setCursor(isReadOnly() ? Qt::ArrowCursor : Qt::IBeamCursor); #endif } else { lastFormatted = doc->firstParagraph(); delete cursor; cursor = new Q3TextCursor(doc); drawCursor(true); repaintContents(); } setModified(); emit textChanged(); emit selectionChanged(); emit copyAvailable(doc->hasSelection(Q3TextDocument::Standard)); } /*! Moves the text cursor according to \a action. This is normally used by some key event handler. \a select specifies whether the text between the current cursor position and the new position should be selected. */ void Q3TextEdit::moveCursor(Q3TextEdit::CursorAction action, bool select) { #ifdef QT_TEXTEDIT_OPTIMIZATION if (d->optimMode) return; #endif #ifdef Q_WS_MAC Q3TextCursor c1 = *cursor; Q3TextCursor c2; #endif drawCursor(false); if (select) { if (!doc->hasSelection(Q3TextDocument::Standard)) doc->setSelectionStart(Q3TextDocument::Standard, *cursor); moveCursor(action); #ifdef Q_WS_MAC c2 = *cursor; if (c1 == c2) if (action == MoveDown || action == MovePgDown) moveCursor(MoveEnd); else if (action == MoveUp || action == MovePgUp) moveCursor(MoveHome); #endif if (doc->setSelectionEnd(Q3TextDocument::Standard, *cursor)) { cursor->paragraph()->document()->nextDoubleBuffered = true; repaintChanged(); } else { drawCursor(true); } ensureCursorVisible(); emit selectionChanged(); emit copyAvailable(doc->hasSelection(Q3TextDocument::Standard)); } else { #ifdef Q_WS_MAC Q3TextCursor cStart = doc->selectionStartCursor(Q3TextDocument::Standard); Q3TextCursor cEnd = doc->selectionEndCursor(Q3TextDocument::Standard); bool redraw = doc->removeSelection(Q3TextDocument::Standard); if (redraw && action == MoveDown) *cursor = cEnd; else if (redraw && action == MoveUp) *cursor = cStart; if (redraw && action == MoveForward) *cursor = cEnd; else if (redraw && action == MoveBackward) *cursor = cStart; else moveCursor(action); c2 = *cursor; if (c1 == c2) if (action == MoveDown) moveCursor(MoveEnd); else if (action == MoveUp) moveCursor(MoveHome); #else bool redraw = doc->removeSelection(Q3TextDocument::Standard); moveCursor(action); #endif if (!redraw) { ensureCursorVisible(); drawCursor(true); } else { cursor->paragraph()->document()->nextDoubleBuffered = true; repaintChanged(); ensureCursorVisible(); drawCursor(true); #ifndef QT_NO_CURSOR viewport()->setCursor(isReadOnly() ? Qt::ArrowCursor : Qt::IBeamCursor); #endif } if (redraw) { emit copyAvailable(doc->hasSelection(Q3TextDocument::Standard)); emit selectionChanged(); } } drawCursor(true); updateCurrentFormat(); } /*! \overload */ void Q3TextEdit::moveCursor(Q3TextEdit::CursorAction action) { resetInputContext(); switch (action) { case MoveBackward: cursor->gotoPreviousLetter(); break; case MoveWordBackward: cursor->gotoPreviousWord(); break; case MoveForward: cursor->gotoNextLetter(); break; case MoveWordForward: cursor->gotoNextWord(); break; case MoveUp: cursor->gotoUp(); break; case MovePgUp: cursor->gotoPageUp(visibleHeight()); break; case MoveDown: cursor->gotoDown(); break; case MovePgDown: cursor->gotoPageDown(visibleHeight()); break; case MoveLineStart: cursor->gotoLineStart(); break; case MoveHome: cursor->gotoHome(); break; case MoveLineEnd: cursor->gotoLineEnd(); break; case MoveEnd: ensureFormatted(doc->lastParagraph()); cursor->gotoEnd(); break; } updateCurrentFormat(); } /*! \reimp */ void Q3TextEdit::resizeEvent(QResizeEvent *e) { Q3ScrollView::resizeEvent(e); if (doc->visibleWidth() == 0) doResize(); } /*! \reimp */ void Q3TextEdit::viewportResizeEvent(QResizeEvent *e) { Q3ScrollView::viewportResizeEvent(e); if (e->oldSize().width() != e->size().width()) { bool stayAtBottom = e->oldSize().height() != e->size().height() && contentsY() > 0 && contentsY() >= doc->height() - e->oldSize().height(); doResize(); if (stayAtBottom) scrollToBottom(); } } /*! Ensures that the cursor is visible by scrolling the text edit if necessary. \sa setCursorPosition() */ void Q3TextEdit::ensureCursorVisible() { // Not visible or the user is dragging the window, so don't position to caret yet if (!updatesEnabled() || !isVisible() || isHorizontalSliderPressed() || isVerticalSliderPressed()) { d->ensureCursorVisibleInShowEvent = true; return; } sync(); Q3TextStringChar *chr = cursor->paragraph()->at(cursor->index()); int h = cursor->paragraph()->lineHeightOfChar(cursor->index()); int x = cursor->paragraph()->rect().x() + chr->x + cursor->offsetX(); int y = 0; int dummy; cursor->paragraph()->lineHeightOfChar(cursor->index(), &dummy, &y); y += cursor->paragraph()->rect().y() + cursor->offsetY(); int w = 1; ensureVisible(x, y + h / 2, w, h / 2 + 2); } /*! \internal */ void Q3TextEdit::sliderReleased() { if (d->ensureCursorVisibleInShowEvent && isVisible()) { d->ensureCursorVisibleInShowEvent = false; ensureCursorVisible(); } } /*! \internal If \a visible is true, the cursor is shown; otherwise it is hidden. */ void Q3TextEdit::drawCursor(bool visible) { d->cursorRepaintMode = true; blinkCursorVisible = visible; QRect r(cursor->topParagraph()->rect()); if (!cursor->nestedDepth()) { int h = cursor->paragraph()->lineHeightOfChar(cursor->index()); r = QRect(r.x(), r.y() + cursor->y(), r.width(), h); } r.moveBy(-contentsX(), -contentsY()); viewport()->update(r); } enum { IdUndo = 0, IdRedo = 1, IdCut = 2, IdCopy = 3, IdPaste = 4, IdClear = 5, IdSelectAll = 6 }; /*! \reimp */ #ifndef QT_NO_WHEELEVENT void Q3TextEdit::contentsWheelEvent(QWheelEvent *e) { if (isReadOnly()) { if (e->state() & Qt::ControlButton) { if (e->delta() > 0) zoomOut(); else if (e->delta() < 0) zoomIn(); return; } } Q3ScrollView::contentsWheelEvent(e); } #endif /*! \reimp */ void Q3TextEdit::contentsMousePressEvent(QMouseEvent *e) { #ifdef QT_TEXTEDIT_OPTIMIZATION if (d->optimMode) { optimMousePressEvent(e); return; } #endif #if !defined(QT_NO_IM) if (e->button() == Qt::LeftButton && d->preeditLength > 0 && cursor->paragraph()) { Q3TextCursor c = *cursor; placeCursor(e->pos(), &c, false); inputContext()->mouseHandler(c.index() - d->preeditStart, e); if (d->preeditLength > 0) return; } #endif if (d->trippleClickTimer->isActive() && (e->globalPos() - d->trippleClickPoint).manhattanLength() < QApplication::startDragDistance()) { Q3TextCursor c1 = *cursor; Q3TextCursor c2 = *cursor; c1.gotoLineStart(); c2.gotoLineEnd(); doc->setSelectionStart(Q3TextDocument::Standard, c1); doc->setSelectionEnd(Q3TextDocument::Standard, c2); *cursor = c2; repaintChanged(); mousePressed = true; return; } clearUndoRedo(); Q3TextCursor oldCursor = *cursor; Q3TextCursor c = *cursor; mousePos = e->pos(); mightStartDrag = false; pressedLink.clear(); d->pressedName.clear(); if (e->button() == Qt::LeftButton) { mousePressed = true; drawCursor(false); placeCursor(e->pos()); ensureCursorVisible(); if (isReadOnly() && linksEnabled()) { Q3TextCursor c = *cursor; placeCursor(e->pos(), &c, true); if (c.paragraph() && c.paragraph()->at(c.index()) && c.paragraph()->at(c.index())->isAnchor()) { pressedLink = c.paragraph()->at(c.index())->anchorHref(); d->pressedName = c.paragraph()->at(c.index())->anchorName(); } } #ifndef QT_NO_DRAGANDDROP if (doc->inSelection(Q3TextDocument::Standard, e->pos())) { mightStartDrag = true; drawCursor(true); dragStartTimer->start(QApplication::startDragTime(), true); dragStartPos = e->pos(); return; } #endif bool redraw = false; if (doc->hasSelection(Q3TextDocument::Standard)) { if (!(e->state() & Qt::ShiftButton)) { redraw = doc->removeSelection(Q3TextDocument::Standard); doc->setSelectionStart(Q3TextDocument::Standard, *cursor); } else { redraw = doc->setSelectionEnd(Q3TextDocument::Standard, *cursor) || redraw; } } else { if (isReadOnly() || !(e->state() & Qt::ShiftButton)) { doc->setSelectionStart(Q3TextDocument::Standard, *cursor); } else { doc->setSelectionStart(Q3TextDocument::Standard, c); redraw = doc->setSelectionEnd(Q3TextDocument::Standard, *cursor) || redraw; } } for (int i = 1; i < doc->numSelections(); ++i) // start with 1 as we don't want to remove the Standard-Selection redraw = doc->removeSelection(i) || redraw; if (!redraw) { drawCursor(true); } else { repaintChanged(); #ifndef QT_NO_CURSOR viewport()->setCursor(isReadOnly() ? Qt::ArrowCursor : Qt::IBeamCursor); #endif } } else if (e->button() == Qt::MidButton) { bool redraw = doc->removeSelection(Q3TextDocument::Standard); if (!redraw) { drawCursor(true); } else { repaintChanged(); #ifndef QT_NO_CURSOR viewport()->setCursor(isReadOnly() ? Qt::ArrowCursor : Qt::IBeamCursor); #endif } } if (*cursor != oldCursor) updateCurrentFormat(); } /*! \reimp */ void Q3TextEdit::contentsMouseMoveEvent(QMouseEvent *e) { #ifdef QT_TEXTEDIT_OPTIMIZATION if (d->optimMode) { optimMouseMoveEvent(e); return; } #endif #if !defined(QT_NO_IM) if (d->preeditLength > 0) return; #endif if (mousePressed) { #ifndef QT_NO_DRAGANDDROP if (mightStartDrag) { dragStartTimer->stop(); if ((e->pos() - dragStartPos).manhattanLength() > QApplication::startDragDistance()) startDrag(); #ifndef QT_NO_CURSOR if (!isReadOnly()) viewport()->setCursor(Qt::IBeamCursor); #endif return; } #endif mousePos = e->pos(); handleMouseMove(mousePos); oldMousePos = mousePos; } #ifndef QT_NO_CURSOR if (!isReadOnly() && !mousePressed) { if (doc->hasSelection(Q3TextDocument::Standard) && doc->inSelection(Q3TextDocument::Standard, e->pos())) viewport()->setCursor(Qt::ArrowCursor); else viewport()->setCursor(Qt::IBeamCursor); } #endif updateCursor(e->pos()); } void Q3TextEdit::copyToClipboard() { #ifndef QT_NO_CLIPBOARD if (QApplication::clipboard()->supportsSelection()) { d->clipboard_mode = QClipboard::Selection; // don't listen to selection changes disconnect(QApplication::clipboard(), SIGNAL(selectionChanged()), this, 0); copy(); // listen to selection changes connect(QApplication::clipboard(), SIGNAL(selectionChanged()), this, SLOT(clipboardChanged())); d->clipboard_mode = QClipboard::Clipboard; } #endif } /*! \reimp */ void Q3TextEdit::contentsMouseReleaseEvent(QMouseEvent * e) { if (!inDoubleClick) { // could be the release of a dblclick int para = 0; int index = charAt(e->pos(), ¶); emit clicked(para, index); } #ifdef QT_TEXTEDIT_OPTIMIZATION if (d->optimMode) { optimMouseReleaseEvent(e); return; } #endif Q3TextCursor oldCursor = *cursor; if (scrollTimer->isActive()) scrollTimer->stop(); #ifndef QT_NO_DRAGANDDROP if (dragStartTimer->isActive()) dragStartTimer->stop(); if (mightStartDrag) { selectAll(false); mousePressed = false; } #endif if (mousePressed) { mousePressed = false; copyToClipboard(); } #ifndef QT_NO_CLIPBOARD else if (e->button() == Qt::MidButton && !isReadOnly()) { // only do middle-click pasting on systems that have selections (ie. X11) if (QApplication::clipboard()->supportsSelection()) { drawCursor(false); placeCursor(e->pos()); ensureCursorVisible(); doc->setSelectionStart(Q3TextDocument::Standard, oldCursor); bool redraw = false; if (doc->hasSelection(Q3TextDocument::Standard)) { redraw = doc->removeSelection(Q3TextDocument::Standard); doc->setSelectionStart(Q3TextDocument::Standard, *cursor); } else { doc->setSelectionStart(Q3TextDocument::Standard, *cursor); } // start with 1 as we don't want to remove the Standard-Selection for (int i = 1; i < doc->numSelections(); ++i) redraw = doc->removeSelection(i) || redraw; if (!redraw) { drawCursor(true); } else { repaintChanged(); #ifndef QT_NO_CURSOR viewport()->setCursor(Qt::IBeamCursor); #endif } d->clipboard_mode = QClipboard::Selection; paste(); d->clipboard_mode = QClipboard::Clipboard; } } #endif emit cursorPositionChanged(cursor); emit cursorPositionChanged(cursor->paragraph()->paragId(), cursor->index()); if (oldCursor != *cursor) updateCurrentFormat(); inDoubleClick = false; #ifndef QT_NO_NETWORKPROTOCOL if (( (!onLink.isEmpty() && onLink == pressedLink) || (!d->onName.isEmpty() && d->onName == d->pressedName)) && linksEnabled()) { if (!onLink.isEmpty()) { QUrl u = QUrl(doc->context()).resolved(onLink); emitLinkClicked(u.toString(QUrl::None)); } if (Q3TextBrowser *browser = qobject_cast<Q3TextBrowser*>(this)) emit browser->anchorClicked(d->onName, onLink); // emitting linkClicked() may result in that the cursor winds // up hovering over a different valid link - check this and // set the appropriate cursor shape updateCursor(e->pos()); } #endif drawCursor(true); if (!doc->hasSelection(Q3TextDocument::Standard, true)) doc->removeSelection(Q3TextDocument::Standard); emit copyAvailable(doc->hasSelection(Q3TextDocument::Standard)); emit selectionChanged(); } /*! \reimp */ void Q3TextEdit::contentsMouseDoubleClickEvent(QMouseEvent * e) { if (e->button() != Qt::LeftButton) { e->ignore(); return; } #if !defined(QT_NO_IM) if (d->preeditLength > 0) return; #endif int para = 0; int index = charAt(e->pos(), ¶); #ifdef QT_TEXTEDIT_OPTIMIZATION if (d->optimMode) { QString str = d->od->lines[LOGOFFSET(para)]; int startIdx = index, endIdx = index, i; if (!str[index].isSpace()) { i = startIdx; // find start of word while (i >= 0 && !str[i].isSpace()) { startIdx = i--; } i = endIdx; // find end of word.. while (i < str.length() && !str[i].isSpace()) { endIdx = ++i; } // ..and start of next while (i < str.length() && str[i].isSpace()) { endIdx = ++i; } optimSetSelection(para, startIdx, para, endIdx); repaintContents(); } } else #endif { Q3TextCursor c1 = *cursor; Q3TextCursor c2 = *cursor; #if defined(Q_OS_MAC) Q3TextParagraph *para = cursor->paragraph(); if (cursor->isValid()) { if (para->at(cursor->index())->c.isLetterOrNumber()) { while (c1.index() > 0 && c1.paragraph()->at(c1.index()-1)->c.isLetterOrNumber()) c1.gotoPreviousLetter(); while (c2.paragraph()->at(c2.index())->c.isLetterOrNumber() && !c2.atParagEnd()) c2.gotoNextLetter(); } else if (para->at(cursor->index())->c.isSpace()) { while (c1.index() > 0 && c1.paragraph()->at(c1.index()-1)->c.isSpace()) c1.gotoPreviousLetter(); while (c2.paragraph()->at(c2.index())->c.isSpace() && !c2.atParagEnd()) c2.gotoNextLetter(); } else if (!c2.atParagEnd()) { c2.gotoNextLetter(); } } #else if (cursor->index() > 0 && !cursor->paragraph()->at(cursor->index()-1)->c.isSpace()) c1.gotoPreviousWord(); if (!cursor->paragraph()->at(cursor->index())->c.isSpace() && !cursor->atParagEnd()) c2.gotoNextWord(); #endif doc->setSelectionStart(Q3TextDocument::Standard, c1); doc->setSelectionEnd(Q3TextDocument::Standard, c2); *cursor = c2; repaintChanged(); d->trippleClickTimer->start(qApp->doubleClickInterval(), true); d->trippleClickPoint = e->globalPos(); } inDoubleClick = true; mousePressed = true; emit doubleClicked(para, index); } #ifndef QT_NO_DRAGANDDROP /*! \reimp */ void Q3TextEdit::contentsDragEnterEvent(QDragEnterEvent *e) { if (isReadOnly() || !Q3TextDrag::canDecode(e)) { e->ignore(); return; } e->acceptAction(); inDnD = true; } /*! \reimp */ void Q3TextEdit::contentsDragMoveEvent(QDragMoveEvent *e) { if (isReadOnly() || !Q3TextDrag::canDecode(e)) { e->ignore(); return; } drawCursor(false); placeCursor(e->pos(), cursor); drawCursor(true); e->acceptAction(); } /*! \reimp */ void Q3TextEdit::contentsDragLeaveEvent(QDragLeaveEvent *) { drawCursor(false); inDnD = false; } /*! \reimp */ void Q3TextEdit::contentsDropEvent(QDropEvent *e) { if (isReadOnly()) return; inDnD = false; e->acceptAction(); bool intern = false; if (Q3RichTextDrag::canDecode(e)) { bool hasSel = doc->hasSelection(Q3TextDocument::Standard); bool internalDrag = e->source() == this || e->source() == viewport(); int dropId, dropIndex; Q3TextCursor insertCursor = *cursor; dropId = cursor->paragraph()->paragId(); dropIndex = cursor->index(); if (hasSel && internalDrag) { Q3TextCursor c1, c2; int selStartId, selStartIndex; int selEndId, selEndIndex; c1 = doc->selectionStartCursor(Q3TextDocument::Standard); c1.restoreState(); c2 = doc->selectionEndCursor(Q3TextDocument::Standard); c2.restoreState(); selStartId = c1.paragraph()->paragId(); selStartIndex = c1.index(); selEndId = c2.paragraph()->paragId(); selEndIndex = c2.index(); if (((dropId > selStartId) || (dropId == selStartId && dropIndex > selStartIndex)) && ((dropId < selEndId) || (dropId == selEndId && dropIndex <= selEndIndex))) insertCursor = c1; if (dropId == selEndId && dropIndex > selEndIndex) { insertCursor = c1; if (selStartId == selEndId) { insertCursor.setIndex(dropIndex - (selEndIndex - selStartIndex)); } else { insertCursor.setIndex(dropIndex - selEndIndex + selStartIndex); } } } if (internalDrag && e->action() == QDropEvent::Move) { removeSelectedText(); intern = true; doc->removeSelection(Q3TextDocument::Standard); } else { doc->removeSelection(Q3TextDocument::Standard); #ifndef QT_NO_CURSOR viewport()->setCursor(isReadOnly() ? Qt::ArrowCursor : Qt::IBeamCursor); #endif } drawCursor(false); cursor->setParagraph(insertCursor.paragraph()); cursor->setIndex(insertCursor.index()); drawCursor(true); if (!cursor->nestedDepth()) { QString subType = QLatin1String("plain"); if (textFormat() != Qt::PlainText) { if (e->provides("application/x-qrichtext")) subType = QLatin1String("x-qrichtext"); } #ifndef QT_NO_CLIPBOARD pasteSubType(subType.toLatin1(), e); #endif // emit appropriate signals. emit selectionChanged(); emit cursorPositionChanged(cursor); emit cursorPositionChanged(cursor->paragraph()->paragId(), cursor->index()); } else { if (intern) undo(); e->ignore(); } } } #endif /*! \reimp */ void Q3TextEdit::contentsContextMenuEvent(QContextMenuEvent *e) { clearUndoRedo(); mousePressed = false; e->accept(); #ifndef QT_NO_POPUPMENU Q3PopupMenu *popup = createPopupMenu(e->pos()); if (!popup) popup = createPopupMenu(); if (!popup) return; int r = popup->exec(e->globalPos(), -1); delete popup; if (r == d->id[IdClear]) clear(); else if (r == d->id[IdSelectAll]) { selectAll(); #ifndef QT_NO_CLIPBOARD // if the clipboard support selections, put the newly selected text into // the clipboard if (QApplication::clipboard()->supportsSelection()) { d->clipboard_mode = QClipboard::Selection; // don't listen to selection changes disconnect(QApplication::clipboard(), SIGNAL(selectionChanged()), this, 0); copy(); // listen to selection changes connect(QApplication::clipboard(), SIGNAL(selectionChanged()), this, SLOT(clipboardChanged())); d->clipboard_mode = QClipboard::Clipboard; } #endif } else if (r == d->id[IdUndo]) undo(); else if (r == d->id[IdRedo]) redo(); #ifndef QT_NO_CLIPBOARD else if (r == d->id[IdCut]) cut(); else if (r == d->id[IdCopy]) copy(); else if (r == d->id[IdPaste]) paste(); #endif #endif } void Q3TextEdit::autoScrollTimerDone() { if (mousePressed) handleMouseMove( viewportToContents(viewport()->mapFromGlobal(QCursor::pos()) )); } void Q3TextEdit::handleMouseMove(const QPoint& pos) { if (!mousePressed) return; if ((!scrollTimer->isActive() && pos.y() < contentsY()) || pos.y() > contentsY() + visibleHeight()) scrollTimer->start(100, false); else if (scrollTimer->isActive() && pos.y() >= contentsY() && pos.y() <= contentsY() + visibleHeight()) scrollTimer->stop(); drawCursor(false); Q3TextCursor oldCursor = *cursor; placeCursor(pos); if (inDoubleClick) { Q3TextCursor cl = *cursor; cl.gotoPreviousWord(); Q3TextCursor cr = *cursor; cr.gotoNextWord(); int diff = QABS(oldCursor.paragraph()->at(oldCursor.index())->x - mousePos.x()); int ldiff = QABS(cl.paragraph()->at(cl.index())->x - mousePos.x()); int rdiff = QABS(cr.paragraph()->at(cr.index())->x - mousePos.x()); if (cursor->paragraph()->lineStartOfChar(cursor->index()) != oldCursor.paragraph()->lineStartOfChar(oldCursor.index())) diff = 0xFFFFFF; if (rdiff < diff && rdiff < ldiff) *cursor = cr; else if (ldiff < diff && ldiff < rdiff) *cursor = cl; else *cursor = oldCursor; } ensureCursorVisible(); bool redraw = false; if (doc->hasSelection(Q3TextDocument::Standard)) { redraw = doc->setSelectionEnd(Q3TextDocument::Standard, *cursor) || redraw; } if (!redraw) { drawCursor(true); } else { repaintChanged(); drawCursor(true); } if (currentFormat && currentFormat->key() != cursor->paragraph()->at(cursor->index())->format()->key()) { currentFormat->removeRef(); currentFormat = doc->formatCollection()->format(cursor->paragraph()->at(cursor->index())->format()); if (currentFormat->isMisspelled()) { currentFormat->removeRef(); currentFormat = doc->formatCollection()->format(currentFormat->font(), currentFormat->color()); } emit currentFontChanged(currentFormat->font()); emit currentColorChanged(currentFormat->color()); emit currentVerticalAlignmentChanged((VerticalAlignment)currentFormat->vAlign()); } if (currentAlignment != cursor->paragraph()->alignment()) { currentAlignment = cursor->paragraph()->alignment(); block_set_alignment = true; emit currentAlignmentChanged(currentAlignment); block_set_alignment = false; } } /*! \internal */ void Q3TextEdit::placeCursor(const QPoint &pos, Q3TextCursor *c, bool link) { #ifdef QT_TEXTEDIT_OPTIMIZATION if (d->optimMode) return; #endif if (!c) c = cursor; if(c == cursor) resetInputContext(); c->restoreState(); Q3TextParagraph *s = doc->firstParagraph(); c->place(pos, s, link); } QVariant Q3TextEdit::inputMethodQuery(Qt::InputMethodQuery query) const { Q3TextCursor c(*cursor); switch(query) { case Qt::ImMicroFocus: { int h = c.paragraph()->lineHeightOfChar(cursor->index()); return QRect(c.x() - contentsX() + frameWidth(), c.y() + cursor->paragraph()->rect().y() - contentsY() + frameWidth(), 1, h); } case Qt::ImFont: return c.paragraph()->at(c.index())->format()->font(); default: // ##### fix the others! return QWidget::inputMethodQuery(query); } } void Q3TextEdit::formatMore() { if (!lastFormatted) return; int bottom = contentsHeight(); int lastTop = -1; int lastBottom = -1; int to = 20; bool firstVisible = false; QRect cr(contentsX(), contentsY(), visibleWidth(), visibleHeight()); for (int i = 0; lastFormatted && (i < to || (firstVisible && lastTop < contentsY()+height())); i++) { lastFormatted->format(); lastTop = lastFormatted->rect().top(); lastBottom = lastFormatted->rect().bottom(); if (i == 0) firstVisible = lastBottom < cr.bottom(); bottom = qMax(bottom, lastBottom); lastFormatted = lastFormatted->next(); } if (bottom > contentsHeight()) { resizeContents(contentsWidth(), qMax(doc->height(), bottom)); } else if (!lastFormatted && lastBottom < contentsHeight()) { resizeContents(contentsWidth(), qMax(doc->height(), lastBottom)); if (contentsHeight() < visibleHeight()) updateContents(0, contentsHeight(), visibleWidth(), visibleHeight() - contentsHeight()); } if (lastFormatted) formatTimer->start(interval, true); else interval = qMax(0, interval); } void Q3TextEdit::doResize() { #ifdef QT_TEXTEDIT_OPTIMIZATION if (!d->optimMode) #endif { if (wrapMode == FixedPixelWidth) return; doc->setMinimumWidth(-1); resizeContents(0, 0); doc->setWidth(visibleWidth()); doc->invalidate(); lastFormatted = doc->firstParagraph(); interval = 0; formatMore(); } repaintContents(); } /*! \internal */ void Q3TextEdit::doChangeInterval() { interval = 0; } /*! \reimp */ bool Q3TextEdit::eventFilter(QObject *o, QEvent *e) { #ifdef QT_TEXTEDIT_OPTIMIZATION if (!d->optimMode && (o == this || o == viewport())) { #else if (o == this || o == viewport()) { #endif if (d->cursorBlinkActive && e->type() == QEvent::FocusIn) { if (QApplication::cursorFlashTime() > 0) blinkTimer->start(QApplication::cursorFlashTime() / 2); drawCursor(true); } else if (e->type() == QEvent::FocusOut) { blinkTimer->stop(); drawCursor(false); } } if (o == this && e->type() == QEvent::PaletteChange) { QColor old(viewport()->palette().color(QPalette::Text)); if (old != palette().color(QPalette::Text)) { QColor c(palette().color(QPalette::Text)); doc->setMinimumWidth(-1); doc->setDefaultFormat(doc->formatCollection()->defaultFormat()->font(), c); lastFormatted = doc->firstParagraph(); formatMore(); repaintChanged(); } } return Q3ScrollView::eventFilter(o, e); } /*! Inserts the given \a text. If \a indent is true the paragraph that contains the text is reindented; if \a checkNewLine is true the \a text is checked for newlines and relaid out. If \a removeSelected is true and there is a selection, the insertion replaces the selected text. */ void Q3TextEdit::insert(const QString &text, bool indent, bool checkNewLine, bool removeSelected) { uint f = 0; if (indent) f |= RedoIndentation; if (checkNewLine) f |= CheckNewLines; if (removeSelected) f |= RemoveSelected; insert(text, f); } /*! Inserts \a text at the current cursor position. The \a insertionFlags define how the text is inserted. If \c RedoIndentation is set, the paragraph is re-indented. If \c CheckNewLines is set, newline characters in \a text result in hard line breaks (i.e. new paragraphs). If \c checkNewLine is not set, the behavior of the editor is undefined if the \a text contains newlines. (It is not possible to change Q3TextEdit's newline handling behavior, but you can use QString::replace() to preprocess text before inserting it.) If \c RemoveSelected is set, any selected text (in selection 0) is removed before the text is inserted. The default flags are \c CheckNewLines | \c RemoveSelected. If the widget is in Qt::LogText mode this function will do nothing. \sa paste() pasteSubType() */ void Q3TextEdit::insert(const QString &text, uint insertionFlags) { #ifdef QT_TEXTEDIT_OPTIMIZATION if (d->optimMode) return; #endif if (cursor->nestedDepth() != 0) // #### for 3.0, disable editing of tables as this is not advanced enough return; bool indent = insertionFlags & RedoIndentation; bool checkNewLine = insertionFlags & CheckNewLines; bool removeSelected = insertionFlags & RemoveSelected; QString txt(text); drawCursor(false); if (!isReadOnly() && doc->hasSelection(Q3TextDocument::Standard) && removeSelected) removeSelectedText(); Q3TextCursor c2 = *cursor; int oldLen = 0; if ( undoEnabled && !isReadOnly() && undoRedoInfo.type != UndoRedoInfo::IME ) { checkUndoRedoInfo(UndoRedoInfo::Insert); // If we are inserting at the end of the previous insertion, we keep this in // the same undo/redo command. Otherwise, we separate them in two different commands. if (undoRedoInfo.valid() && undoRedoInfo.index + undoRedoInfo.d->text.length() != cursor->index()) { clearUndoRedo(); undoRedoInfo.type = UndoRedoInfo::Insert; } if (!undoRedoInfo.valid()) { undoRedoInfo.id = cursor->paragraph()->paragId(); undoRedoInfo.index = cursor->index(); undoRedoInfo.d->text.clear(); } oldLen = undoRedoInfo.d->text.length(); } lastFormatted = checkNewLine && cursor->paragraph()->prev() ? cursor->paragraph()->prev() : cursor->paragraph(); Q3TextCursor oldCursor = *cursor; cursor->insert(txt, checkNewLine); if (doc->useFormatCollection() && !doc->preProcessor()) { doc->setSelectionStart(Q3TextDocument::Temp, oldCursor); doc->setSelectionEnd(Q3TextDocument::Temp, *cursor); doc->setFormat(Q3TextDocument::Temp, currentFormat, Q3TextFormat::Format); doc->removeSelection(Q3TextDocument::Temp); } if (indent && (txt == QString(QLatin1Char('{')) || txt == QString(QLatin1Char('}')) || txt == QString(QLatin1Char(':')) || txt == QString(QLatin1Char('#')))) cursor->indent(); formatMore(); repaintChanged(); ensureCursorVisible(); drawCursor(true); if ( undoEnabled && !isReadOnly() && undoRedoInfo.type != UndoRedoInfo::IME ) { undoRedoInfo.d->text += txt; if (!doc->preProcessor()) { for (int i = 0; i < (int)txt.length(); ++i) { if (txt[i] != QLatin1Char('\n') && c2.paragraph()->at(c2.index())->format()) { c2.paragraph()->at(c2.index())->format()->addRef(); undoRedoInfo.d->text. setFormat(oldLen + i, c2.paragraph()->at(c2.index())->format(), true); } c2.gotoNextLetter(); } } } if (!removeSelected) { doc->setSelectionStart(Q3TextDocument::Standard, oldCursor); doc->setSelectionEnd(Q3TextDocument::Standard, *cursor); repaintChanged(); } setModified(); emit textChanged(); } /*! Inserts \a text in the paragraph \a para at position \a index. */ void Q3TextEdit::insertAt(const QString &text, int para, int index) { #ifdef QT_TEXTEDIT_OPTIMIZATION if (d->optimMode) { optimInsert(text, para, index); return; } #endif Q3TextParagraph *p = doc->paragAt(para); if (!p) return; removeSelection(Q3TextDocument::Standard); Q3TextCursor tmp = *cursor; cursor->setParagraph(p); cursor->setIndex(index); insert(text, false, true, false); *cursor = tmp; removeSelection(Q3TextDocument::Standard); } /*! Inserts \a text as a new paragraph at position \a para. If \a para is -1, the text is appended. Use append() if the append operation is performance critical. */ void Q3TextEdit::insertParagraph(const QString &text, int para) { #ifdef QT_TEXTEDIT_OPTIMIZATION if (d->optimMode) { optimInsert(text + QLatin1Char('\n'), para, 0); return; } #endif for (int i = 0; i < (int)doc->numSelections(); ++i) doc->removeSelection(i); Q3TextParagraph *p = doc->paragAt(para); bool append = !p; if (!p) p = doc->lastParagraph(); Q3TextCursor old = *cursor; drawCursor(false); cursor->setParagraph(p); cursor->setIndex(0); clearUndoRedo(); qtextedit_ignore_readonly = true; if (append && cursor->paragraph()->length() > 1) { cursor->setIndex(cursor->paragraph()->length() - 1); doKeyboardAction(ActionReturn); } insert(text, false, true, true); doKeyboardAction(ActionReturn); qtextedit_ignore_readonly = false; drawCursor(false); *cursor = old; drawCursor(true); repaintChanged(); } /*! Removes the paragraph \a para. */ void Q3TextEdit::removeParagraph(int para) { #ifdef QT_TEXTEDIT_OPTIMIZATION if (d->optimMode) return; #endif Q3TextParagraph *p = doc->paragAt(para); if (!p) return; for (int i = 0; i < doc->numSelections(); ++i) doc->removeSelection(i); Q3TextCursor start(doc); Q3TextCursor end(doc); start.setParagraph(p); start.setIndex(0); end.setParagraph(p); end.setIndex(p->length() - 1); if (!(p == doc->firstParagraph() && p == doc->lastParagraph())) { if (p->next()) { end.setParagraph(p->next()); end.setIndex(0); } else if (p->prev()) { start.setParagraph(p->prev()); start.setIndex(p->prev()->length() - 1); } } doc->setSelectionStart(Q3TextDocument::Temp, start); doc->setSelectionEnd(Q3TextDocument::Temp, end); removeSelectedText(Q3TextDocument::Temp); } /*! Undoes the last operation. If there is no operation to undo, i.e. there is no undo step in the undo/redo history, nothing happens. \sa undoAvailable() redo() undoDepth() */ void Q3TextEdit::undo() { clearUndoRedo(); if (isReadOnly() || !doc->commands()->isUndoAvailable() || !undoEnabled) return; for (int i = 0; i < (int)doc->numSelections(); ++i) doc->removeSelection(i); #ifndef QT_NO_CURSOR viewport()->setCursor(isReadOnly() ? Qt::ArrowCursor : Qt::IBeamCursor); #endif clearUndoRedo(); drawCursor(false); Q3TextCursor *c = doc->undo(cursor); if (!c) { drawCursor(true); return; } lastFormatted = 0; repaintChanged(); ensureCursorVisible(); drawCursor(true); setModified(); // ### If we get back to a completely blank textedit, it // is possible that cursor is invalid and further actions // might not fix the problem, so reset the cursor here. // This is copied from removeSeletedText(), it might be // okay to just call that. if (!cursor->isValid()) { delete cursor; cursor = new Q3TextCursor(doc); drawCursor(true); repaintContents(); } emit undoAvailable(isUndoAvailable()); emit redoAvailable(isRedoAvailable()); emit textChanged(); } /*! Redoes the last operation. If there is no operation to redo, i.e. there is no redo step in the undo/redo history, nothing happens. \sa redoAvailable() undo() undoDepth() */ void Q3TextEdit::redo() { if (isReadOnly() || !doc->commands()->isRedoAvailable() || !undoEnabled) return; for (int i = 0; i < (int)doc->numSelections(); ++i) doc->removeSelection(i); #ifndef QT_NO_CURSOR viewport()->setCursor(isReadOnly() ? Qt::ArrowCursor : Qt::IBeamCursor); #endif clearUndoRedo(); drawCursor(false); Q3TextCursor *c = doc->redo(cursor); if (!c) { drawCursor(true); return; } lastFormatted = 0; ensureCursorVisible(); repaintChanged(); ensureCursorVisible(); drawCursor(true); setModified(); emit undoAvailable(isUndoAvailable()); emit redoAvailable(isRedoAvailable()); emit textChanged(); } /*! Pastes the text from the clipboard into the text edit at the current cursor position. Only plain text is pasted. If there is no text in the clipboard nothing happens. \sa pasteSubType() cut() Q3TextEdit::copy() */ void Q3TextEdit::paste() { #ifndef QT_NO_MIMECLIPBOARD if (isReadOnly()) return; QString subType = QLatin1String("plain"); if (textFormat() != Qt::PlainText) { QMimeSource *m = QApplication::clipboard()->data(d->clipboard_mode); if (!m) return; if (m->provides("application/x-qrichtext")) subType = QLatin1String("x-qrichtext"); } pasteSubType(subType.toLatin1()); #endif } void Q3TextEdit::checkUndoRedoInfo(UndoRedoInfo::Type t) { if (undoRedoInfo.valid() && t != undoRedoInfo.type) { clearUndoRedo(); } undoRedoInfo.type = t; } /*! Repaints any paragraphs that have changed. Although used extensively internally you shouldn't need to call this yourself. */ void Q3TextEdit::repaintChanged() { if (!updatesEnabled() || !viewport()->updatesEnabled()) return; if (doc->firstParagraph()) lastFormatted = doc->firstParagraph(); updateContents(); // good enough until this class is rewritten } #ifndef QT_NO_MIME Q3TextDrag *Q3TextEdit::dragObject(QWidget *parent) const { if (!doc->hasSelection(Q3TextDocument::Standard) || doc->selectedText(Q3TextDocument::Standard).isEmpty()) return 0; if (textFormat() != Qt::RichText) return new Q3TextDrag(doc->selectedText(Q3TextDocument::Standard), parent); Q3RichTextDrag *drag = new Q3RichTextDrag(parent); drag->setPlainText(doc->selectedText(Q3TextDocument::Standard)); drag->setRichText(doc->selectedText(Q3TextDocument::Standard, true)); return drag; } #endif /*! Copies the selected text (from selection 0) to the clipboard and deletes it from the text edit. If there is no selected text (in selection 0) nothing happens. \sa Q3TextEdit::copy() paste() pasteSubType() */ void Q3TextEdit::cut() { if (isReadOnly()) return; normalCopy(); removeSelectedText(); } void Q3TextEdit::normalCopy() { #ifndef QT_NO_MIME Q3TextDrag *drag = dragObject(); if (!drag) return; #ifndef QT_NO_MIMECLIPBOARD QApplication::clipboard()->setData(drag, d->clipboard_mode); #endif // QT_NO_MIMECLIPBOARD #endif // QT_NO_MIME } /*! Copies any selected text (from selection 0) to the clipboard. \sa hasSelectedText() copyAvailable() */ void Q3TextEdit::copy() { #ifndef QT_NO_CLIPBOARD # ifdef QT_TEXTEDIT_OPTIMIZATION if (d->optimMode && optimHasSelection()) QApplication::clipboard()->setText(optimSelectedText(), d->clipboard_mode); else normalCopy(); # else normalCopy(); # endif #endif } /*! \internal Re-indents the current paragraph. */ void Q3TextEdit::indent() { if (isReadOnly()) return; drawCursor(false); if (!doc->hasSelection(Q3TextDocument::Standard)) cursor->indent(); else doc->indentSelection(Q3TextDocument::Standard); repaintChanged(); drawCursor(true); setModified(); emit textChanged(); } /*! Reimplemented to allow tabbing through links. If \a n is true the tab moves the focus to the next child; if \a n is false the tab moves the focus to the previous child. Returns true if the focus was moved; otherwise returns false. */ bool Q3TextEdit::focusNextPrevChild(bool n) { if (!isReadOnly() || !linksEnabled()) return false; bool b = doc->focusNextPrevChild(n); repaintChanged(); if (b) { Q3TextParagraph *p = doc->focusIndicator.parag; int start = doc->focusIndicator.start; int len = doc->focusIndicator.len; int y = p->rect().y(); while (p && len == 0 && p->at(start)->isCustom() && p->at(start)->customItem()->isNested()) { Q3TextTable *t = (Q3TextTable*)p->at(start)->customItem(); QList<Q3TextTableCell *> cells = t->tableCells(); for (int idx = 0; idx < cells.count(); ++idx) { Q3TextTableCell *c = cells.at(idx); Q3TextDocument *cellDoc = c->richText(); if ( cellDoc->hasFocusParagraph() ) { y += c->geometry().y() + c->verticalAlignmentOffset(); p = cellDoc->focusIndicator.parag; start = cellDoc->focusIndicator.start; len = cellDoc->focusIndicator.len; if ( p ) y += p->rect().y(); break; } } } setContentsPos( contentsX(), QMIN( y, contentsHeight() - visibleHeight() ) ); } return b; } /*! \internal This functions sets the current format to \a f. Only the fields of \a f which are specified by the \a flags are used. */ void Q3TextEdit::setFormat(Q3TextFormat *f, int flags) { if (doc->hasSelection(Q3TextDocument::Standard)) { drawCursor(false); Q3TextCursor c1 = doc->selectionStartCursor(Q3TextDocument::Standard); c1.restoreState(); Q3TextCursor c2 = doc->selectionEndCursor(Q3TextDocument::Standard); c2.restoreState(); if (undoEnabled) { clearUndoRedo(); undoRedoInfo.type = UndoRedoInfo::Format; undoRedoInfo.id = c1.paragraph()->paragId(); undoRedoInfo.index = c1.index(); undoRedoInfo.eid = c2.paragraph()->paragId(); undoRedoInfo.eindex = c2.index(); readFormats(c1, c2, undoRedoInfo.d->text); undoRedoInfo.format = f; undoRedoInfo.flags = flags; clearUndoRedo(); } doc->setFormat(Q3TextDocument::Standard, f, flags); repaintChanged(); formatMore(); drawCursor(true); setModified(); emit textChanged(); } if (currentFormat && currentFormat->key() != f->key()) { currentFormat->removeRef(); currentFormat = doc->formatCollection()->format(f); if (currentFormat->isMisspelled()) { currentFormat->removeRef(); currentFormat = doc->formatCollection()->format(currentFormat->font(), currentFormat->color()); } emit currentFontChanged(currentFormat->font()); emit currentColorChanged(currentFormat->color()); emit currentVerticalAlignmentChanged((VerticalAlignment)currentFormat->vAlign()); if (cursor->index() == cursor->paragraph()->length() - 1) { currentFormat->addRef(); cursor->paragraph()->string()->setFormat(cursor->index(), currentFormat, true); if (cursor->paragraph()->length() == 1) { cursor->paragraph()->invalidate(0); cursor->paragraph()->format(); repaintChanged(); } } } } /*! \internal \warning In Qt 3.1 we will provide a cleaer API for the functionality which is provided by this function and in Qt 4.0 this function will go away. Sets the paragraph style of the current paragraph to \a dm. If \a dm is Q3StyleSheetItem::DisplayListItem, the type of the list item is set to \a listStyle. \sa setAlignment() */ void Q3TextEdit::setParagType(Q3StyleSheetItem::DisplayMode dm, Q3StyleSheetItem::ListStyle listStyle) { if (isReadOnly()) return; drawCursor(false); Q3TextParagraph *start = cursor->paragraph(); Q3TextParagraph *end = start; if (doc->hasSelection(Q3TextDocument::Standard)) { start = doc->selectionStartCursor(Q3TextDocument::Standard).topParagraph(); end = doc->selectionEndCursor(Q3TextDocument::Standard).topParagraph(); if (end->paragId() < start->paragId()) return; // do not trust our selections } clearUndoRedo(); undoRedoInfo.type = UndoRedoInfo::Style; undoRedoInfo.id = start->paragId(); undoRedoInfo.eid = end->paragId(); undoRedoInfo.styleInformation = Q3TextStyleCommand::readStyleInformation(doc, undoRedoInfo.id, undoRedoInfo.eid); while (start != end->next()) { start->setListStyle(listStyle); if (dm == Q3StyleSheetItem::DisplayListItem) { start->setListItem(true); if(start->listDepth() == 0) start->setListDepth(1); } else if (start->isListItem()) { start->setListItem(false); start->setListDepth(qMax(start->listDepth()-1, 0)); } start = start->next(); } clearUndoRedo(); repaintChanged(); formatMore(); drawCursor(true); setModified(); emit textChanged(); } /*! Sets the alignment of the current paragraph to \a a. Valid alignments are Qt::AlignLeft, Qt::AlignRight, Qt::AlignJustify and Qt::AlignCenter (which centers horizontally). */ void Q3TextEdit::setAlignment(int a) { if (isReadOnly() || block_set_alignment) return; drawCursor(false); Q3TextParagraph *start = cursor->paragraph(); Q3TextParagraph *end = start; if (doc->hasSelection(Q3TextDocument::Standard)) { start = doc->selectionStartCursor(Q3TextDocument::Standard).topParagraph(); end = doc->selectionEndCursor(Q3TextDocument::Standard).topParagraph(); if (end->paragId() < start->paragId()) return; // do not trust our selections } clearUndoRedo(); undoRedoInfo.type = UndoRedoInfo::Style; undoRedoInfo.id = start->paragId(); undoRedoInfo.eid = end->paragId(); undoRedoInfo.styleInformation = Q3TextStyleCommand::readStyleInformation(doc, undoRedoInfo.id, undoRedoInfo.eid); while (start != end->next()) { start->setAlignment(a); start = start->next(); } clearUndoRedo(); repaintChanged(); formatMore(); drawCursor(true); if (currentAlignment != a) { currentAlignment = a; emit currentAlignmentChanged(currentAlignment); } setModified(); emit textChanged(); } void Q3TextEdit::updateCurrentFormat() { int i = cursor->index(); if (i > 0) --i; if (doc->useFormatCollection() && (!currentFormat || currentFormat->key() != cursor->paragraph()->at(i)->format()->key())) { if (currentFormat) currentFormat->removeRef(); currentFormat = doc->formatCollection()->format(cursor->paragraph()->at(i)->format()); if (currentFormat->isMisspelled()) { currentFormat->removeRef(); currentFormat = doc->formatCollection()->format(currentFormat->font(), currentFormat->color()); } emit currentFontChanged(currentFormat->font()); emit currentColorChanged(currentFormat->color()); emit currentVerticalAlignmentChanged((VerticalAlignment)currentFormat->vAlign()); } if (currentAlignment != cursor->paragraph()->alignment()) { currentAlignment = cursor->paragraph()->alignment(); block_set_alignment = true; emit currentAlignmentChanged(currentAlignment); block_set_alignment = false; } } /*! If \a b is true sets the current format to italic; otherwise sets the current format to non-italic. \sa italic() */ void Q3TextEdit::setItalic(bool b) { Q3TextFormat f(*currentFormat); f.setItalic(b); Q3TextFormat *f2 = doc->formatCollection()->format(&f); setFormat(f2, Q3TextFormat::Italic); } /*! If \a b is true sets the current format to bold; otherwise sets the current format to non-bold. \sa bold() */ void Q3TextEdit::setBold(bool b) { Q3TextFormat f(*currentFormat); f.setBold(b); Q3TextFormat *f2 = doc->formatCollection()->format(&f); setFormat(f2, Q3TextFormat::Bold); } /*! If \a b is true sets the current format to underline; otherwise sets the current format to non-underline. \sa underline() */ void Q3TextEdit::setUnderline(bool b) { Q3TextFormat f(*currentFormat); f.setUnderline(b); Q3TextFormat *f2 = doc->formatCollection()->format(&f); setFormat(f2, Q3TextFormat::Underline); } /*! Sets the font family of the current format to \a fontFamily. \sa family() setCurrentFont() */ void Q3TextEdit::setFamily(const QString &fontFamily) { Q3TextFormat f(*currentFormat); f.setFamily(fontFamily); Q3TextFormat *f2 = doc->formatCollection()->format(&f); setFormat(f2, Q3TextFormat::Family); } /*! Sets the point size of the current format to \a s. Note that if \a s is zero or negative, the behavior of this function is not defined. \sa pointSize() setCurrentFont() setFamily() */ void Q3TextEdit::setPointSize(int s) { Q3TextFormat f(*currentFormat); f.setPointSize(s); Q3TextFormat *f2 = doc->formatCollection()->format(&f); setFormat(f2, Q3TextFormat::Size); } /*! Sets the color of the current format, i.e. of the text, to \a c. \sa color() setPaper() */ void Q3TextEdit::setColor(const QColor &c) { Q3TextFormat f(*currentFormat); f.setColor(c); Q3TextFormat *f2 = doc->formatCollection()->format(&f); setFormat(f2, Q3TextFormat::Color); } /*! Sets the vertical alignment of the current format, i.e. of the text, to \a a. \sa color() setPaper() */ void Q3TextEdit::setVerticalAlignment(Q3TextEdit::VerticalAlignment a) { Q3TextFormat f(*currentFormat); f.setVAlign((Q3TextFormat::VerticalAlignment)a); Q3TextFormat *f2 = doc->formatCollection()->format(&f); setFormat(f2, Q3TextFormat::VAlign); } void Q3TextEdit::setFontInternal(const QFont &f_) { QFont font = f_; if (font.kerning()) font.setKerning(false); Q3TextFormat f(*currentFormat); f.setFont(font); Q3TextFormat *f2 = doc->formatCollection()->format(&f); setFormat(f2, Q3TextFormat::Font); } QString Q3TextEdit::text() const { #ifdef QT_TEXTEDIT_OPTIMIZATION if (d->optimMode) return optimText(); #endif Q3TextParagraph *p = doc->firstParagraph(); if (!p || (!p->next() && p->length() <= 1)) return QString::fromLatin1(""); if (isReadOnly()) return doc->originalText(); return doc->text(); } /*! \overload Returns the text of paragraph \a para. If textFormat() is Qt::RichText the text will contain HTML formatting tags. */ QString Q3TextEdit::text(int para) const { #ifdef QT_TEXTEDIT_OPTIMIZATION if (d->optimMode && (d->od->numLines >= para)) { QString paraStr = d->od->lines[LOGOFFSET(para)]; if (paraStr.isEmpty()) paraStr = QLatin1Char('\n'); return paraStr; } else #endif return doc->text(para); } /*! \overload Changes the text of the text edit to the string \a text and the context to \a context. Any previous text is removed. \a text may be interpreted either as plain text or as rich text, depending on the textFormat(). The default setting is Qt::AutoText, i.e. the text edit auto-detects the format from \a text. For rich text the rendering style and available tags are defined by a styleSheet(); see Q3StyleSheet for details. The optional \a context is a path which the text edit's Q3MimeSourceFactory uses to resolve the locations of files and images. (See \l{Q3TextEdit::Q3TextEdit()}.) It is passed to the text edit's Q3MimeSourceFactory when quering data. Note that the undo/redo history is cleared by this function. \sa text(), setTextFormat() */ void Q3TextEdit::setText(const QString &text, const QString &context) { #ifdef QT_TEXTEDIT_OPTIMIZATION if (d->optimMode) { optimSetText(text); return; } #endif if (!isModified() && isReadOnly() && this->context() == context && this->text() == text) return; emit undoAvailable(false); emit redoAvailable(false); undoRedoInfo.clear(); doc->commands()->clear(); lastFormatted = 0; int oldCursorPos = cursor->index(); int oldCursorPar = cursor->paragraph()->paragId(); cursor->restoreState(); delete cursor; doc->setText(text, context); if (wrapMode == FixedPixelWidth) { resizeContents(wrapWidth, 0); doc->setWidth(wrapWidth); doc->setMinimumWidth(wrapWidth); } else { doc->setMinimumWidth(-1); resizeContents(0, 0); } lastFormatted = doc->firstParagraph(); cursor = new Q3TextCursor(doc); updateContents(); if (isModified()) setModified(false); emit textChanged(); if (cursor->index() != oldCursorPos || cursor->paragraph()->paragId() != oldCursorPar) { emit cursorPositionChanged(cursor); emit cursorPositionChanged(cursor->paragraph()->paragId(), cursor->index()); } formatMore(); updateCurrentFormat(); d->scrollToAnchor.clear(); } /*! \property Q3TextEdit::text \brief the text edit's text There is no default text. On setting, any previous text is deleted. The text may be interpreted either as plain text or as rich text, depending on the textFormat(). The default setting is Qt::AutoText, i.e. the text edit auto-detects the format of the text. For richtext, calling text() on an editable Q3TextEdit will cause the text to be regenerated from the textedit. This may mean that the QString returned may not be exactly the same as the one that was set. \sa textFormat */ /*! \property Q3TextEdit::readOnly \brief whether the text edit is read-only In a read-only text edit the user can only navigate through the text and select text; modifying the text is not possible. This property's default is false. */ /*! Finds the next occurrence of the string, \a expr. Returns true if \a expr was found; otherwise returns false. If \a para and \a index are both 0 the search begins from the current cursor position. If \a para and \a index are both not 0, the search begins from the \c{*}\a{index} character position in the \c{*}\a{para} paragraph. If \a cs is true the search is case sensitive, otherwise it is case insensitive. If \a wo is true the search looks for whole word matches only; otherwise it searches for any matching text. If \a forward is true (the default) the search works forward from the starting position to the end of the text, otherwise it works backwards to the beginning of the text. If \a expr is found the function returns true. If \a index and \a para are not 0, the number of the paragraph in which the first character of the match was found is put into \c{*}\a{para}, and the index position of that character within the paragraph is put into \c{*}\a{index}. If \a expr is not found the function returns false. If \a index and \a para are not 0 and \a expr is not found, \c{*}\a{index} and \c{*}\a{para} are undefined. Please note that this function will make the next occurrence of the string (if found) the current selection, and will thus modify the cursor position. Using the \a para and \a index parameters will not work correctly in case the document contains tables. */ bool Q3TextEdit::find(const QString &expr, bool cs, bool wo, bool forward, int *para, int *index) { #ifdef QT_TEXTEDIT_OPTIMIZATION if (d->optimMode) return optimFind(expr, cs, wo, forward, para, index); #endif drawCursor(false); #ifndef QT_NO_CURSOR viewport()->setCursor(isReadOnly() ? Qt::ArrowCursor : Qt::IBeamCursor); #endif Q3TextCursor findcur = *cursor; if (para && index) { if (doc->paragAt(*para)) findcur.gotoPosition(doc->paragAt(*para), *index); else findcur.gotoEnd(); } else if (doc->hasSelection(Q3TextDocument::Standard)){ // maks sure we do not find the same selection again if (forward) findcur.gotoNextLetter(); else findcur.gotoPreviousLetter(); } else if (!forward && findcur.index() == 0 && findcur.paragraph() == findcur.topParagraph()) { findcur.gotoEnd(); } removeSelection(Q3TextDocument::Standard); bool found = doc->find(findcur, expr, cs, wo, forward); if (found) { if (para) *para = findcur.paragraph()->paragId(); if (index) *index = findcur.index(); *cursor = findcur; repaintChanged(); ensureCursorVisible(); } drawCursor(true); if (found) { emit cursorPositionChanged(cursor); emit cursorPositionChanged(cursor->paragraph()->paragId(), cursor->index()); } return found; } void Q3TextEdit::blinkCursor() { bool cv = cursorVisible; blinkCursorVisible = !blinkCursorVisible; drawCursor(blinkCursorVisible); cursorVisible = cv; } /*! Sets the cursor to position \a index in paragraph \a para. \sa getCursorPosition() */ void Q3TextEdit::setCursorPosition(int para, int index) { Q3TextParagraph *p = doc->paragAt(para); if (!p) return; if (index > p->length() - 1) index = p->length() - 1; drawCursor(false); cursor->setParagraph(p); cursor->setIndex(index); ensureCursorVisible(); drawCursor(true); updateCurrentFormat(); emit cursorPositionChanged(cursor); emit cursorPositionChanged(cursor->paragraph()->paragId(), cursor->index()); } /*! This function sets the \c{*}\a{para} and \c{*}\a{index} parameters to the current cursor position. \a para and \a index must not be 0. \sa setCursorPosition() */ void Q3TextEdit::getCursorPosition(int *para, int *index) const { if (!para || !index) return; *para = cursor->paragraph()->paragId(); *index = cursor->index(); } /*! Sets a selection which starts at position \a indexFrom in paragraph \a paraFrom and ends at position \a indexTo in paragraph \a paraTo. Any existing selections which have a different id (\a selNum) are left alone, but if an existing selection has the same id as \a selNum it is removed and replaced by this selection. Uses the selection settings of selection \a selNum. If \a selNum is 0, this is the default selection. The cursor is moved to the end of the selection if \a selNum is 0, otherwise the cursor position remains unchanged. \sa getSelection() selectedText */ void Q3TextEdit::setSelection(int paraFrom, int indexFrom, int paraTo, int indexTo, int selNum) { #ifdef QT_TEXTEDIT_OPTIMIZATION if (d->optimMode) { optimSetSelection(paraFrom, indexFrom, paraTo, indexTo); repaintContents(); return; } #endif if (doc->hasSelection(selNum)) { doc->removeSelection(selNum); repaintChanged(); } if (selNum > doc->numSelections() - 1) doc->addSelection(selNum); Q3TextParagraph *p1 = doc->paragAt(paraFrom); if (!p1) return; Q3TextParagraph *p2 = doc->paragAt(paraTo); if (!p2) return; if (indexFrom > p1->length() - 1) indexFrom = p1->length() - 1; if (indexTo > p2->length() - 1) indexTo = p2->length() - 1; drawCursor(false); Q3TextCursor c = *cursor; Q3TextCursor oldCursor = *cursor; c.setParagraph(p1); c.setIndex(indexFrom); cursor->setParagraph(p2); cursor->setIndex(indexTo); doc->setSelectionStart(selNum, c); doc->setSelectionEnd(selNum, *cursor); repaintChanged(); ensureCursorVisible(); if (selNum != Q3TextDocument::Standard) *cursor = oldCursor; drawCursor(true); } /*! If there is a selection, \c{*}\a{paraFrom} is set to the number of the paragraph in which the selection begins and \c{*}\a{paraTo} is set to the number of the paragraph in which the selection ends. (They could be the same.) \c{*}\a{indexFrom} is set to the index at which the selection begins within \c{*}\a{paraFrom}, and \c{*}\a{indexTo} is set to the index at which the selection ends within \c{*}\a{paraTo}. If there is no selection, \c{*}\a{paraFrom}, \c{*}\a{indexFrom}, \c{*}\a{paraTo} and \c{*}\a{indexTo} are all set to -1. If \a paraFrom, \a indexFrom, \a paraTo or \a indexTo is 0 this function does nothing. The \a selNum is the number of the selection (multiple selections are supported). It defaults to 0 (the default selection). \sa setSelection() selectedText */ void Q3TextEdit::getSelection(int *paraFrom, int *indexFrom, int *paraTo, int *indexTo, int selNum) const { if (!paraFrom || !paraTo || !indexFrom || !indexTo) return; #ifdef QT_TEXTEDIT_OPTIMIZATION if (d->optimMode) { *paraFrom = d->od->selStart.line; *paraTo = d->od->selEnd.line; *indexFrom = d->od->selStart.index; *indexTo = d->od->selEnd.index; return; } #endif if (!doc->hasSelection(selNum)) { *paraFrom = -1; *indexFrom = -1; *paraTo = -1; *indexTo = -1; return; } doc->selectionStart(selNum, *paraFrom, *indexFrom); doc->selectionEnd(selNum, *paraTo, *indexTo); } /*! \property Q3TextEdit::textFormat \brief the text format: rich text, plain text, log text or auto text. The text format is one of the following: \list \i Qt::PlainText - all characters, except newlines, are displayed verbatim, including spaces. Whenever a newline appears in the text the text edit inserts a hard line break and begins a new paragraph. \i Qt::RichText - rich text rendering. The available styles are defined in the default stylesheet Q3StyleSheet::defaultSheet(). \i Qt::LogText - optimized mode for very large texts. Supports a very limited set of formatting tags (color, bold, underline and italic settings). \i Qt::AutoText - this is the default. The text edit autodetects which rendering style is best, Qt::PlainText or Qt::RichText. This is done by using the Q3StyleSheet::mightBeRichText() function. \endlist */ void Q3TextEdit::setTextFormat(Qt::TextFormat format) { doc->setTextFormat(format); #ifdef QT_TEXTEDIT_OPTIMIZATION checkOptimMode(); #endif } Qt::TextFormat Q3TextEdit::textFormat() const { return doc->textFormat(); } /*! Returns the number of paragraphs in the text; an empty textedit is always considered to have one paragraph, so 1 is returned in this case. */ int Q3TextEdit::paragraphs() const { #ifdef QT_TEXTEDIT_OPTIMIZATION if (d->optimMode) { return d->od->numLines; } #endif return doc->lastParagraph()->paragId() + 1; } /*! Returns the number of lines in paragraph \a para, or -1 if there is no paragraph with index \a para. */ int Q3TextEdit::linesOfParagraph(int para) const { #ifdef QT_TEXTEDIT_OPTIMIZATION if (d->optimMode) { if (d->od->numLines >= para) return 1; else return -1; } #endif Q3TextParagraph *p = doc->paragAt(para); if (!p) return -1; return p->lines(); } /*! Returns the length of the paragraph \a para (i.e. the number of characters), or -1 if there is no paragraph with index \a para. This function ignores newlines. */ int Q3TextEdit::paragraphLength(int para) const { #ifdef QT_TEXTEDIT_OPTIMIZATION if (d->optimMode) { if (d->od->numLines >= para) { if (d->od->lines[LOGOFFSET(para)].isEmpty()) // CR return 1; else return d->od->lines[LOGOFFSET(para)].length(); } return -1; } #endif Q3TextParagraph *p = doc->paragAt(para); if (!p) return -1; return p->length() - 1; } /*! Returns the number of lines in the text edit; this could be 0. \warning This function may be slow. Lines change all the time during word wrapping, so this function has to iterate over all the paragraphs and get the number of lines from each one individually. */ int Q3TextEdit::lines() const { #ifdef QT_TEXTEDIT_OPTIMIZATION if (d->optimMode) { return d->od->numLines; } #endif Q3TextParagraph *p = doc->firstParagraph(); int l = 0; while (p) { l += p->lines(); p = p->next(); } return l; } /*! Returns the line number of the line in paragraph \a para in which the character at position \a index appears. The \a index position is relative to the beginning of the paragraph. If there is no such paragraph or no such character at the \a index position (e.g. the index is out of range) -1 is returned. */ int Q3TextEdit::lineOfChar(int para, int index) { Q3TextParagraph *p = doc->paragAt(para); if (!p) return -1; int idx, line; Q3TextStringChar *c = p->lineStartOfChar(index, &idx, &line); if (!c) return -1; return line; } void Q3TextEdit::setModified(bool m) { bool oldModified = modified; modified = m; if (modified && doc->oTextValid) doc->invalidateOriginalText(); if (oldModified != modified) emit modificationChanged(modified); } /*! \property Q3TextEdit::modified \brief whether the document has been modified by the user */ bool Q3TextEdit::isModified() const { return modified; } void Q3TextEdit::setModified() { if (!isModified()) setModified(true); } /*! Returns true if the current format is italic; otherwise returns false. \sa setItalic() */ bool Q3TextEdit::italic() const { return currentFormat->font().italic(); } /*! Returns true if the current format is bold; otherwise returns false. \sa setBold() */ bool Q3TextEdit::bold() const { return currentFormat->font().bold(); } /*! Returns true if the current format is underlined; otherwise returns false. \sa setUnderline() */ bool Q3TextEdit::underline() const { return currentFormat->font().underline(); } /*! Returns the font family of the current format. \sa setFamily() setCurrentFont() setPointSize() */ QString Q3TextEdit::family() const { return currentFormat->font().family(); } /*! Returns the point size of the font of the current format. \sa setFamily() setCurrentFont() setPointSize() */ int Q3TextEdit::pointSize() const { return currentFormat->font().pointSize(); } /*! Returns the color of the current format. \sa setColor() setPaper() */ QColor Q3TextEdit::color() const { return currentFormat->color(); } /*! Returns Q3ScrollView::font() \warning In previous versions this function returned the font of the current format. This lead to confusion. Please use currentFont() instead. */ QFont Q3TextEdit::font() const { return Q3ScrollView::font(); } /*! Returns the font of the current format. \sa setCurrentFont() setFamily() setPointSize() */ QFont Q3TextEdit::currentFont() const { return currentFormat->font(); } /*! Returns the alignment of the current paragraph. \sa setAlignment() */ int Q3TextEdit::alignment() const { return currentAlignment; } /*! Returns the vertical alignment of the current format. \sa setVerticalAlignment() */ Q3TextEdit::VerticalAlignment Q3TextEdit::verticalAlignment() const { return (Q3TextEdit::VerticalAlignment) currentFormat->vAlign(); } void Q3TextEdit::startDrag() { #ifndef QT_NO_DRAGANDDROP mousePressed = false; inDoubleClick = false; Q3DragObject *drag = dragObject(viewport()); if (!drag) return; if (isReadOnly()) { drag->dragCopy(); } else { if (drag->drag() && Q3DragObject::target() != this && Q3DragObject::target() != viewport()) removeSelectedText(); } #endif } /*! If \a select is true (the default), all the text is selected as selection 0. If \a select is false any selected text is unselected, i.e. the default selection (selection 0) is cleared. \sa selectedText */ void Q3TextEdit::selectAll(bool select) { #ifdef QT_TEXTEDIT_OPTIMIZATION if (d->optimMode) { if (select) optimSelectAll(); else optimRemoveSelection(); return; } #endif if (!select) doc->removeSelection(Q3TextDocument::Standard); else doc->selectAll(Q3TextDocument::Standard); repaintChanged(); emit copyAvailable(doc->hasSelection(Q3TextDocument::Standard)); emit selectionChanged(); #ifndef QT_NO_CURSOR viewport()->setCursor(isReadOnly() ? Qt::ArrowCursor : Qt::IBeamCursor); #endif } void Q3TextEdit::UndoRedoInfo::clear() { if (valid()) { if (type == Insert || type == Return) doc->addCommand(new Q3TextInsertCommand(doc, id, index, d->text.rawData(), styleInformation)); else if (type == Format) doc->addCommand(new Q3TextFormatCommand(doc, id, index, eid, eindex, d->text.rawData(), format, flags)); else if (type == Style) doc->addCommand(new Q3TextStyleCommand(doc, id, eid, styleInformation)); else if (type != Invalid) { doc->addCommand(new Q3TextDeleteCommand(doc, id, index, d->text.rawData(), styleInformation)); } } type = Invalid; d->text.clear(); id = -1; index = -1; styleInformation = QByteArray(); } /*! If there is some selected text (in selection 0) it is deleted. If there is no selected text (in selection 0) the character to the right of the text cursor is deleted. \sa removeSelectedText() cut() */ void Q3TextEdit::del() { if (doc->hasSelection(Q3TextDocument::Standard)) { removeSelectedText(); return; } doKeyboardAction(ActionDelete); } Q3TextEdit::UndoRedoInfo::UndoRedoInfo(Q3TextDocument *dc) : type(Invalid), doc(dc) { d = new QUndoRedoInfoPrivate; d->text.clear(); id = -1; index = -1; } Q3TextEdit::UndoRedoInfo::~UndoRedoInfo() { delete d; } bool Q3TextEdit::UndoRedoInfo::valid() const { return id >= 0 && type != Invalid; } /*! \internal Resets the current format to the default format. */ void Q3TextEdit::resetFormat() { setAlignment(Qt::AlignAuto); setParagType(Q3StyleSheetItem::DisplayBlock, Q3StyleSheetItem::ListDisc); setFormat(doc->formatCollection()->defaultFormat(), Q3TextFormat::Format); } /*! Returns the Q3StyleSheet which is being used by this text edit. \sa setStyleSheet() */ Q3StyleSheet* Q3TextEdit::styleSheet() const { return doc->styleSheet(); } /*! Sets the stylesheet to use with this text edit to \a styleSheet. Changes will only take effect for new text added with setText() or append(). \sa styleSheet() */ void Q3TextEdit::setStyleSheet(Q3StyleSheet* styleSheet) { doc->setStyleSheet(styleSheet); } /*! \property Q3TextEdit::paper \brief the background (paper) brush. The brush that is currently used to draw the background of the text edit. The initial setting is an empty brush. */ void Q3TextEdit::setPaper(const QBrush& pap) { doc->setPaper(new QBrush(pap)); if ( pap.pixmap() ) viewport()->setBackgroundPixmap( *pap.pixmap() ); QPalette pal = palette(); pal.setColor(QPalette::Window, pap.color()); setPalette(pal); pal = viewport()->palette(); pal.setColor(QPalette::Window, pap.color()); viewport()->setPalette(pal); #ifdef QT_TEXTEDIT_OPTIMIZATION // force a repaint of the entire viewport - using updateContents() // would clip the coords to the content size if (d->optimMode) repaintContents(contentsX(), contentsY(), viewport()->width(), viewport()->height()); else #endif updateContents(); } QBrush Q3TextEdit::paper() const { if (doc->paper()) return *doc->paper(); return QBrush(palette().base()); } /*! \property Q3TextEdit::linkUnderline \brief whether hypertext links will be underlined If true (the default) hypertext links will be displayed underlined. If false links will not be displayed underlined. */ void Q3TextEdit::setLinkUnderline(bool b) { if (doc->underlineLinks() == b) return; doc->setUnderlineLinks(b); repaintChanged(); } bool Q3TextEdit::linkUnderline() const { return doc->underlineLinks(); } /*! Sets the text edit's mimesource factory to \a factory. See Q3MimeSourceFactory for further details. \sa mimeSourceFactory() */ #ifndef QT_NO_MIME void Q3TextEdit::setMimeSourceFactory(Q3MimeSourceFactory* factory) { doc->setMimeSourceFactory(factory); } /*! Returns the Q3MimeSourceFactory which is being used by this text edit. \sa setMimeSourceFactory() */ Q3MimeSourceFactory* Q3TextEdit::mimeSourceFactory() const { return doc->mimeSourceFactory(); } #endif /*! Returns how many pixels high the text edit needs to be to display all the text if the text edit is \a w pixels wide. */ int Q3TextEdit::heightForWidth(int w) const { int oldw = doc->width(); doc->doLayout(0, w); int h = doc->height(); doc->setWidth(oldw); doc->invalidate(); ((Q3TextEdit*)this)->formatMore(); return h; } /*! Appends a new paragraph with \a text to the end of the text edit. Note that the undo/redo history is cleared by this function, and no undo history is kept for appends which makes them faster than insert()s. If you want to append text which is added to the undo/redo history as well, use insertParagraph(). */ void Q3TextEdit::append(const QString &text) { #ifdef QT_TEXTEDIT_OPTIMIZATION if (d->optimMode) { optimAppend(text); return; } #endif // flush and clear the undo/redo stack if necessary undoRedoInfo.clear(); doc->commands()->clear(); doc->removeSelection(Q3TextDocument::Standard); Qt::TextFormat f = doc->textFormat(); if (f == Qt::AutoText) { if (Q3StyleSheet::mightBeRichText(text)) f = Qt::RichText; else f = Qt::PlainText; } drawCursor(false); Q3TextCursor oldc(*cursor); ensureFormatted(doc->lastParagraph()); bool atBottom = contentsY() >= contentsHeight() - visibleHeight(); cursor->gotoEnd(); if (cursor->index() > 0) cursor->splitAndInsertEmptyParagraph(); Q3TextCursor oldCursor2 = *cursor; if (f == Qt::PlainText) { cursor->insert(text, true); if (doc->useFormatCollection() && !doc->preProcessor() && currentFormat != cursor->paragraph()->at( cursor->index() )->format()) { doc->setSelectionStart( Q3TextDocument::Temp, oldCursor2 ); doc->setSelectionEnd( Q3TextDocument::Temp, *cursor ); doc->setFormat( Q3TextDocument::Temp, currentFormat, Q3TextFormat::Format ); doc->removeSelection( Q3TextDocument::Temp ); } } else { cursor->paragraph()->setListItem(false); cursor->paragraph()->setListDepth(0); if (cursor->paragraph()->prev()) cursor->paragraph()->prev()->invalidate(0); // vertical margins might have to change doc->setRichTextInternal(text); } formatMore(); repaintChanged(); if (atBottom) scrollToBottom(); *cursor = oldc; if (!isReadOnly()) cursorVisible = true; setModified(); emit textChanged(); } /*! \property Q3TextEdit::hasSelectedText \brief whether some text is selected in selection 0 */ bool Q3TextEdit::hasSelectedText() const { #ifdef QT_TEXTEDIT_OPTIMIZATION if (d->optimMode) return optimHasSelection(); else #endif return doc->hasSelection(Q3TextDocument::Standard); } /*! \property Q3TextEdit::selectedText \brief The selected text (from selection 0) or an empty string if there is no currently selected text (in selection 0). The text is always returned as Qt::PlainText if the textFormat() is Qt::PlainText or Qt::AutoText, otherwise it is returned as HTML. \sa hasSelectedText */ QString Q3TextEdit::selectedText() const { #ifdef QT_TEXTEDIT_OPTIMIZATION if (d->optimMode) return optimSelectedText(); else #endif return doc->selectedText(Q3TextDocument::Standard, textFormat() == Qt::RichText); } bool Q3TextEdit::handleReadOnlyKeyEvent(QKeyEvent *e) { switch(e->key()) { case Qt::Key_Down: setContentsPos(contentsX(), contentsY() + 10); break; case Qt::Key_Up: setContentsPos(contentsX(), contentsY() - 10); break; case Qt::Key_Left: setContentsPos(contentsX() - 10, contentsY()); break; case Qt::Key_Right: setContentsPos(contentsX() + 10, contentsY()); break; case Qt::Key_PageUp: setContentsPos(contentsX(), contentsY() - visibleHeight()); break; case Qt::Key_PageDown: setContentsPos(contentsX(), contentsY() + visibleHeight()); break; case Qt::Key_Home: setContentsPos(contentsX(), 0); break; case Qt::Key_End: setContentsPos(contentsX(), contentsHeight() - visibleHeight()); break; case Qt::Key_F16: // Copy key on Sun keyboards copy(); break; #ifndef QT_NO_NETWORKPROTOCOL case Qt::Key_Return: case Qt::Key_Enter: case Qt::Key_Space: { if (!doc->focusIndicator.href.isEmpty() || !doc->focusIndicator.name.isEmpty()) { if (!doc->focusIndicator.href.isEmpty()) { QUrl u = QUrl(doc->context()).resolved(doc->focusIndicator.href); emitLinkClicked(u.toString(QUrl::None)); } if (!doc->focusIndicator.name.isEmpty()) if (Q3TextBrowser *browser = qobject_cast<Q3TextBrowser*>(this)) emit browser->anchorClicked(doc->focusIndicator.name, doc->focusIndicator.href); #ifndef QT_NO_CURSOR viewport()->setCursor(isReadOnly() ? Qt::ArrowCursor : Qt::IBeamCursor); #endif } } break; #endif default: if (e->state() & Qt::ControlButton) { switch (e->key()) { case Qt::Key_C: case Qt::Key_F16: // Copy key on Sun keyboards copy(); break; #ifdef Q_WS_WIN case Qt::Key_Insert: copy(); break; case Qt::Key_A: selectAll(); break; #endif } } return false; } return true; } /*! Returns the context of the text edit. The context is a path which the text edit's Q3MimeSourceFactory uses to resolve the locations of files and images. \sa text */ QString Q3TextEdit::context() const { return doc->context(); } /*! \property Q3TextEdit::documentTitle \brief the title of the document parsed from the text. For Qt::PlainText the title will be an empty string. For \c Qt::RichText the title will be the text between the \c{<title>} tags, if present, otherwise an empty string. */ QString Q3TextEdit::documentTitle() const { return doc->attributes()[QLatin1String("title")]; } void Q3TextEdit::makeParagVisible(Q3TextParagraph *p) { setContentsPos(contentsX(), qMin(p->rect().y(), contentsHeight() - visibleHeight())); } /*! Scrolls the text edit to make the text at the anchor called \a name visible, if it can be found in the document. If the anchor isn't found no scrolling will occur. An anchor is defined using the HTML anchor tag, e.g. \c{<a name="target">}. */ void Q3TextEdit::scrollToAnchor(const QString& name) { if (!isVisible()) { d->scrollToAnchor = name; return; } if (name.isEmpty()) return; sync(); Q3TextCursor cursor(doc); Q3TextParagraph* last = doc->lastParagraph(); for (;;) { Q3TextStringChar* c = cursor.paragraph()->at(cursor.index()); if(c->isAnchor()) { QString a = c->anchorName(); if (a == name || (a.contains(QLatin1Char('#')) && a.split(QLatin1Char('#')).contains(name))) { setContentsPos(contentsX(), qMin(cursor.paragraph()->rect().top() + cursor.totalOffsetY(), contentsHeight() - visibleHeight())); break; } } if (cursor.paragraph() == last && cursor.atParagEnd() ) break; cursor.gotoNextLetter(); } } /*! Returns the text for the attribute \a attr (Qt::AnchorHref by default) if there is an anchor at position \a pos (in contents coordinates); otherwise returns an empty string. */ QString Q3TextEdit::anchorAt(const QPoint& pos, Qt::AnchorAttribute attr) { Q3TextCursor c(doc); placeCursor(pos, &c, true); switch(attr) { case Qt::AnchorName: return c.paragraph()->at(c.index())->anchorName(); case Qt::AnchorHref: return c.paragraph()->at(c.index())->anchorHref(); } // incase the compiler is really dumb about determining if a function // returns something :) return QString(); } void Q3TextEdit::documentWidthChanged(int w) { resizeContents(qMax(visibleWidth(), w), contentsHeight()); } /*! \internal This function does nothing */ void Q3TextEdit::updateStyles() { } void Q3TextEdit::setDocument(Q3TextDocument *dc) { if (dc == 0) { qWarning("Q3TextEdit::setDocument() called with null Q3TextDocument pointer"); return; } if (dc == doc) return; doc = dc; delete cursor; cursor = new Q3TextCursor(doc); clearUndoRedo(); undoRedoInfo.doc = doc; lastFormatted = 0; } #ifndef QT_NO_CLIPBOARD /*! Pastes the text with format \a subtype from the clipboard into the text edit at the current cursor position. The \a subtype can be "plain" or "html". If there is no text with format \a subtype in the clipboard nothing happens. \sa paste() cut() Q3TextEdit::copy() */ void Q3TextEdit::pasteSubType(const QByteArray &subtype) { #ifndef QT_NO_MIMECLIPBOARD QMimeSource *m = QApplication::clipboard()->data(d->clipboard_mode); pasteSubType(subtype, m); #endif } /*! \internal */ void Q3TextEdit::pasteSubType(const QByteArray& subtype, QMimeSource *m) { #ifndef QT_NO_MIME QByteArray st = subtype; if (subtype != "x-qrichtext") st.prepend("text/"); else st.prepend("application/"); if (!m) return; if (doc->hasSelection(Q3TextDocument::Standard)) removeSelectedText(); if (!Q3RichTextDrag::canDecode(m)) return; QString t; if (!Q3RichTextDrag::decode(m, t, QString::fromLatin1(st), QString::fromLatin1(subtype))) return; if (st == "application/x-qrichtext") { int start; if ((start = t.indexOf(QLatin1String("<!--StartFragment-->"))) != -1) { start += 20; int end = t.indexOf(QLatin1String("<!--EndFragment-->")); Q3TextCursor oldC = *cursor; // during the setRichTextInternal() call the cursors // paragraph might get joined with the provious one, so // the cursors one would get deleted and oldC.paragraph() // would be a dnagling pointer. To avoid that try to go // one letter back and later go one forward again. oldC.gotoPreviousLetter(); bool couldGoBack = oldC != *cursor; // first para might get deleted, so remember to reset it bool wasAtFirst = oldC.paragraph() == doc->firstParagraph(); if (start < end) t = t.mid(start, end - start); else t = t.mid(start); lastFormatted = cursor->paragraph(); if (lastFormatted->prev()) lastFormatted = lastFormatted->prev(); doc->setRichTextInternal(t, cursor); // the first para might have been deleted in // setRichTextInternal(). To be sure, reset it if // necessary. if (wasAtFirst) { int index = oldC.index(); oldC.setParagraph(doc->firstParagraph()); oldC.setIndex(index); } // if we went back one letter before (see last comment), // go one forward to point to the right position if (couldGoBack) oldC.gotoNextLetter(); if (undoEnabled && !isReadOnly()) { doc->setSelectionStart(Q3TextDocument::Temp, oldC); doc->setSelectionEnd(Q3TextDocument::Temp, *cursor); checkUndoRedoInfo(UndoRedoInfo::Insert); if (!undoRedoInfo.valid()) { undoRedoInfo.id = oldC.paragraph()->paragId(); undoRedoInfo.index = oldC.index(); undoRedoInfo.d->text.clear(); } int oldLen = undoRedoInfo.d->text.length(); if (!doc->preProcessor()) { QString txt = doc->selectedText(Q3TextDocument::Temp); undoRedoInfo.d->text += txt; for (int i = 0; i < (int)txt.length(); ++i) { if (txt[i] != QLatin1Char('\n') && oldC.paragraph()->at(oldC.index())->format()) { oldC.paragraph()->at(oldC.index())->format()->addRef(); undoRedoInfo.d->text. setFormat(oldLen + i, oldC.paragraph()->at(oldC.index())->format(), true); } oldC.gotoNextLetter(); } } undoRedoInfo.clear(); removeSelection(Q3TextDocument::Temp); } formatMore(); setModified(); emit textChanged(); repaintChanged(); ensureCursorVisible(); return; } } else { #if defined(Q_OS_WIN32) // Need to convert CRLF to LF t.replace(QLatin1String("\r\n"), QLatin1String("\n")); #elif defined(Q_OS_MAC) //need to convert CR to LF t.replace(QLatin1Char('\r'), QLatin1Char('\n')); #endif QChar *uc = (QChar *)t.unicode(); for (int i = 0; i < t.length(); i++) { if (uc[i] < QLatin1Char(' ') && uc[i] != QLatin1Char('\n') && uc[i] != QLatin1Char('\t')) uc[i] = QLatin1Char(' '); } if (!t.isEmpty()) insert(t, false, true); } #endif //QT_NO_MIME } #ifndef QT_NO_MIMECLIPBOARD /*! Prompts the user to choose a type from a list of text types available, then copies text from the clipboard (if there is any) into the text edit at the current text cursor position. Any selected text (in selection 0) is first deleted. */ void Q3TextEdit::pasteSpecial(const QPoint& pt) { QByteArray st = pickSpecial(QApplication::clipboard()->data(d->clipboard_mode), true, pt); if (!st.isEmpty()) pasteSubType(st); } #endif #ifndef QT_NO_MIME QByteArray Q3TextEdit::pickSpecial(QMimeSource* ms, bool always_ask, const QPoint& pt) { if (ms) { #ifndef QT_NO_MENU QMenu popup(this); QString fmt; int n = 0; QHash<QString, bool> done; for (int i = 0; !(fmt = QLatin1String(ms->format(i))).isNull(); i++) { int semi = fmt.indexOf(QLatin1Char(';')); if (semi >= 0) fmt = fmt.left(semi); if (fmt.left(5) == QLatin1String("text/")) { fmt = fmt.mid(5); if (!done.contains(fmt)) { done.insert(fmt,true); popup.insertItem(fmt, i); n++; } } } if (n) { QAction *action = (n == 1 && !always_ask) ? popup.actions().at(0) : popup.exec(pt); if (action) return action->text().toLatin1(); } #else QString fmt; for (int i = 0; !(fmt = ms->format(i)).isNull(); i++) { int semi = fmt.indexOf(';'); if (semi >= 0) fmt = fmt.left(semi); if (fmt.left(5) == "text/") { fmt = fmt.mid(5); return fmt.latin1(); } } #endif } return QByteArray(); } #endif // QT_NO_MIME #endif // QT_NO_CLIPBOARD /*! \enum Q3TextEdit::WordWrap This enum defines the Q3TextEdit's word wrap modes. \value NoWrap Do not wrap the text. \value WidgetWidth Wrap the text at the current width of the widget (this is the default). Wrapping is at whitespace by default; this can be changed with setWrapPolicy(). \value FixedPixelWidth Wrap the text at a fixed number of pixels from the widget's left side. The number of pixels is set with wrapColumnOrWidth(). \value FixedColumnWidth Wrap the text at a fixed number of character columns from the widget's left side. The number of characters is set with wrapColumnOrWidth(). This is useful if you need formatted text that can also be displayed gracefully on devices with monospaced fonts, for example a standard VT100 terminal, where you might set wrapColumnOrWidth() to 80. \sa setWordWrap() wordWrap() */ /*! \property Q3TextEdit::wordWrap \brief the word wrap mode The default mode is \c WidgetWidth which causes words to be wrapped at the right edge of the text edit. Wrapping occurs at whitespace, keeping whole words intact. If you want wrapping to occur within words use setWrapPolicy(). If you set a wrap mode of \c FixedPixelWidth or \c FixedColumnWidth you should also call setWrapColumnOrWidth() with the width you want. \sa WordWrap, wrapColumnOrWidth, wrapPolicy, */ void Q3TextEdit::setWordWrap(WordWrap mode) { if (wrapMode == mode) return; wrapMode = mode; switch (mode) { case NoWrap: document()->formatter()->setWrapEnabled(false); document()->formatter()->setWrapAtColumn(-1); doc->setWidth(visibleWidth()); doc->setMinimumWidth(-1); doc->invalidate(); updateContents(); lastFormatted = doc->firstParagraph(); interval = 0; formatMore(); break; case WidgetWidth: document()->formatter()->setWrapEnabled(true); document()->formatter()->setWrapAtColumn(-1); doResize(); break; case FixedPixelWidth: document()->formatter()->setWrapEnabled(true); document()->formatter()->setWrapAtColumn(-1); if (wrapWidth < 0) wrapWidth = 200; setWrapColumnOrWidth(wrapWidth); break; case FixedColumnWidth: if (wrapWidth < 0) wrapWidth = 80; document()->formatter()->setWrapEnabled(true); document()->formatter()->setWrapAtColumn(wrapWidth); setWrapColumnOrWidth(wrapWidth); break; } #ifdef QT_TEXTEDIT_OPTIMIZATION checkOptimMode(); #endif } Q3TextEdit::WordWrap Q3TextEdit::wordWrap() const { return wrapMode; } /*! \property Q3TextEdit::wrapColumnOrWidth \brief the position (in pixels or columns depending on the wrap mode) where text will be wrapped If the wrap mode is \c FixedPixelWidth, the value is the number of pixels from the left edge of the text edit at which text should be wrapped. If the wrap mode is \c FixedColumnWidth, the value is the column number (in character columns) from the left edge of the text edit at which text should be wrapped. \sa wordWrap */ void Q3TextEdit::setWrapColumnOrWidth(int value) { wrapWidth = value; if (wrapMode == FixedColumnWidth) { document()->formatter()->setWrapAtColumn(wrapWidth); resizeContents(0, 0); doc->setWidth(visibleWidth()); doc->setMinimumWidth(-1); } else if (wrapMode == FixedPixelWidth) { document()->formatter()->setWrapAtColumn(-1); resizeContents(wrapWidth, 0); doc->setWidth(wrapWidth); doc->setMinimumWidth(wrapWidth); } else { return; } doc->invalidate(); updateContents(); lastFormatted = doc->firstParagraph(); interval = 0; formatMore(); } int Q3TextEdit::wrapColumnOrWidth() const { if (wrapMode == WidgetWidth) return visibleWidth(); return wrapWidth; } /*! \enum Q3TextEdit::WrapPolicy This enum defines where text can be wrapped in word wrap mode. \value AtWhiteSpace Don't use this deprecated value (it is a synonym for \c AtWordBoundary which you should use instead). \value Anywhere Break anywhere, including within words. \value AtWordBoundary Break lines at word boundaries, e.g. spaces or newlines \value AtWordOrDocumentBoundary Break lines at whitespace, e.g. spaces or newlines if possible. Break it anywhere otherwise. \sa setWrapPolicy() */ /*! \property Q3TextEdit::wrapPolicy \brief the word wrap policy, at whitespace or anywhere Defines where text can be wrapped when word wrap mode is not \c NoWrap. The choices are \c AtWordBoundary (the default), \c Anywhere and \c AtWordOrDocumentBoundary \sa wordWrap */ void Q3TextEdit::setWrapPolicy(WrapPolicy policy) { if (wPolicy == policy) return; wPolicy = policy; Q3TextFormatter *formatter; if (policy == AtWordBoundary || policy == AtWordOrDocumentBoundary) { formatter = new Q3TextFormatterBreakWords; formatter->setAllowBreakInWords(policy == AtWordOrDocumentBoundary); } else { formatter = new Q3TextFormatterBreakInWords; } formatter->setWrapAtColumn(document()->formatter()->wrapAtColumn()); formatter->setWrapEnabled(document()->formatter()->isWrapEnabled(0)); document()->setFormatter(formatter); doc->invalidate(); updateContents(); lastFormatted = doc->firstParagraph(); interval = 0; formatMore(); } Q3TextEdit::WrapPolicy Q3TextEdit::wrapPolicy() const { return wPolicy; } /*! Deletes all the text in the text edit. \sa cut() removeSelectedText() setText() */ void Q3TextEdit::clear() { #ifdef QT_TEXTEDIT_OPTIMIZATION if (d->optimMode) { optimSetText(QLatin1String("")); } else #endif { // make clear undoable doc->selectAll(Q3TextDocument::Temp); removeSelectedText(Q3TextDocument::Temp); setContentsPos(0, 0); if (cursor->isValid()) cursor->restoreState(); doc->clear(true); delete cursor; cursor = new Q3TextCursor(doc); lastFormatted = 0; } updateContents(); emit cursorPositionChanged(cursor); emit cursorPositionChanged(cursor->paragraph()->paragId(), cursor->index()); } int Q3TextEdit::undoDepth() const { return document()->undoDepth(); } /*! \property Q3TextEdit::length \brief the number of characters in the text */ int Q3TextEdit::length() const { #ifdef QT_TEXTEDIT_OPTIMIZATION if (d->optimMode) return d->od->len; else #endif return document()->length(); } /*! \property Q3TextEdit::tabStopWidth \brief the tab stop width in pixels */ int Q3TextEdit::tabStopWidth() const { return document()->tabStopWidth(); } void Q3TextEdit::setUndoDepth(int d) { document()->setUndoDepth(d); } void Q3TextEdit::setTabStopWidth(int ts) { document()->setTabStops(ts); doc->invalidate(); lastFormatted = doc->firstParagraph(); interval = 0; formatMore(); updateContents(); } /*! \reimp */ QSize Q3TextEdit::sizeHint() const { // cf. Q3ScrollView::sizeHint() ensurePolished(); int f = 2 * frameWidth(); int h = fontMetrics().height(); QSize sz(f, f); return sz.expandedTo(QSize(12 * h, 8 * h)); } void Q3TextEdit::clearUndoRedo() { if (!undoEnabled) return; undoRedoInfo.clear(); emit undoAvailable(doc->commands()->isUndoAvailable()); emit redoAvailable(doc->commands()->isRedoAvailable()); } /*! \internal \warning In Qt 3.1 we will provide a cleaer API for the functionality which is provided by this function and in Qt 4.0 this function will go away. This function gets the format of the character at position \a index in paragraph \a para. Sets \a font to the character's font, \a color to the character's color and \a verticalAlignment to the character's vertical alignment. Returns false if \a para or \a index is out of range otherwise returns true. */ bool Q3TextEdit::getFormat(int para, int index, QFont *font, QColor *color, VerticalAlignment *verticalAlignment) { if (!font || !color) return false; Q3TextParagraph *p = doc->paragAt(para); if (!p) return false; if (index < 0 || index >= p->length()) return false; *font = p->at(index)->format()->font(); *color = p->at(index)->format()->color(); *verticalAlignment = (VerticalAlignment)p->at(index)->format()->vAlign(); return true; } /*! \internal \warning In Qt 3.1 we will provide a cleaer API for the functionality which is provided by this function and in Qt 4.0 this function will go away. This function gets the format of the paragraph \a para. Sets \a font to the paragraphs's font, \a color to the paragraph's color, \a verticalAlignment to the paragraph's vertical alignment, \a alignment to the paragraph's alignment, \a displayMode to the paragraph's display mode, \a listStyle to the paragraph's list style (if the display mode is Q3StyleSheetItem::DisplayListItem) and \a listDepth to the depth of the list (if the display mode is Q3StyleSheetItem::DisplayListItem). Returns false if \a para is out of range otherwise returns true. */ bool Q3TextEdit::getParagraphFormat(int para, QFont *font, QColor *color, VerticalAlignment *verticalAlignment, int *alignment, Q3StyleSheetItem::DisplayMode *displayMode, Q3StyleSheetItem::ListStyle *listStyle, int *listDepth) { if (!font || !color || !alignment || !displayMode || !listStyle) return false; Q3TextParagraph *p = doc->paragAt(para); if (!p) return false; *font = p->at(0)->format()->font(); *color = p->at(0)->format()->color(); *verticalAlignment = (VerticalAlignment)p->at(0)->format()->vAlign(); *alignment = p->alignment(); *displayMode = p->isListItem() ? Q3StyleSheetItem::DisplayListItem : Q3StyleSheetItem::DisplayBlock; *listStyle = p->listStyle(); *listDepth = p->listDepth(); return true; } /*! This function is called to create a right mouse button popup menu at the document position \a pos. If you want to create a custom popup menu, reimplement this function and return the created popup menu. Ownership of the popup menu is transferred to the caller. \warning The QPopupMenu ID values 0-7 are reserved, and they map to the standard operations. When inserting items into your custom popup menu, be sure to specify ID values larger than 7. */ Q3PopupMenu *Q3TextEdit::createPopupMenu(const QPoint& pos) { Q_UNUSED(pos) #ifndef QT_NO_POPUPMENU Q3PopupMenu *popup = new Q3PopupMenu(this, "qt_edit_menu"); if (!isReadOnly()) { d->id[IdUndo] = popup->insertItem(tr("&Undo") + ACCEL_KEY(Z)); d->id[IdRedo] = popup->insertItem(tr("&Redo") + ACCEL_KEY(Y)); popup->addSeparator(); } #ifndef QT_NO_CLIPBOARD if (!isReadOnly()) d->id[IdCut] = popup->insertItem(tr("Cu&t") + ACCEL_KEY(X)); d->id[IdCopy] = popup->insertItem(tr("&Copy") + ACCEL_KEY(C)); if (!isReadOnly()) d->id[IdPaste] = popup->insertItem(tr("&Paste") + ACCEL_KEY(V)); #endif if (!isReadOnly()) { d->id[IdClear] = popup->insertItem(tr("Clear")); popup->addSeparator(); } #if defined(Q_WS_X11) d->id[IdSelectAll] = popup->insertItem(tr("Select All")); #else d->id[IdSelectAll] = popup->insertItem(tr("Select All") + ACCEL_KEY(A)); #endif popup->setItemEnabled(d->id[IdUndo], !isReadOnly() && doc->commands()->isUndoAvailable()); popup->setItemEnabled(d->id[IdRedo], !isReadOnly() && doc->commands()->isRedoAvailable()); #ifndef QT_NO_CLIPBOARD popup->setItemEnabled(d->id[IdCut], !isReadOnly() && doc->hasSelection(Q3TextDocument::Standard, true)); #ifdef QT_TEXTEDIT_OPTIMIZATION popup->setItemEnabled(d->id[IdCopy], d->optimMode ? optimHasSelection() : doc->hasSelection(Q3TextDocument::Standard, true)); #else popup->setItemEnabled(d->id[IdCopy], doc->hasSelection(Q3TextDocument::Standard, true)); #endif popup->setItemEnabled(d->id[IdPaste], !isReadOnly() && !QApplication::clipboard()->text(d->clipboard_mode).isEmpty()); #endif const bool isEmptyDocument = (length() == 0); popup->setItemEnabled(d->id[IdClear], !isReadOnly() && !isEmptyDocument); popup->setItemEnabled(d->id[IdSelectAll], !isEmptyDocument); return popup; #else return 0; #endif } /*! \overload This function is called to create a right mouse button popup menu. If you want to create a custom popup menu, reimplement this function and return the created popup menu. Ownership of the popup menu is transferred to the caller. This function is only called if createPopupMenu(const QPoint &) returns 0. */ Q3PopupMenu *Q3TextEdit::createPopupMenu() { return 0; } /*! \fn Q3TextEdit::zoomIn() \overload Zooms in on the text by making the base font size one point larger and recalculating all font sizes to be the new size. This does not change the size of any images. \sa zoomOut() */ /*! \fn Q3TextEdit::zoomOut() \overload Zooms out on the text by making the base font size one point smaller and recalculating all font sizes to be the new size. This does not change the size of any images. \sa zoomIn() */ /*! Zooms in on the text by making the base font size \a range points larger and recalculating all font sizes to be the new size. This does not change the size of any images. \sa zoomOut() */ void Q3TextEdit::zoomIn(int range) { QFont f(Q3ScrollView::font()); f.setPointSize(f.pointSize() + range); setFont(f); } /*! Zooms out on the text by making the base font size \a range points smaller and recalculating all font sizes to be the new size. This does not change the size of any images. \sa zoomIn() */ void Q3TextEdit::zoomOut(int range) { QFont f(Q3ScrollView::font()); f.setPointSize(qMax(1, f.pointSize() - range)); setFont(f); } /*! Zooms the text by making the base font size \a size points and recalculating all font sizes to be the new size. This does not change the size of any images. */ void Q3TextEdit::zoomTo(int size) { QFont f(Q3ScrollView::font()); f.setPointSize(size); setFont(f); } /*! Q3TextEdit is optimized for large amounts text. One of its optimizations is to format only the visible text, formatting the rest on demand, e.g. as the user scrolls, so you don't usually need to call this function. In some situations you may want to force the whole text to be formatted. For example, if after calling setText(), you wanted to know the height of the document (using contentsHeight()), you would call this function first. */ void Q3TextEdit::sync() { #ifdef QT_TEXTEDIT_OPTIMIZATION if (d->optimMode) { QFontMetrics fm(Q3ScrollView::font()); resizeContents(d->od->maxLineWidth + 4, d->od->numLines * fm.lineSpacing() + 1); } else #endif { while (lastFormatted) { lastFormatted->format(); lastFormatted = lastFormatted->next(); } resizeContents(contentsWidth(), doc->height()); } updateScrollBars(); } /*! Sets the background color of selection number \a selNum to \a back and specifies whether the text of this selection should be inverted with \a invertText. This only works for \a selNum > 0. The default selection (\a selNum == 0) gets its attributes from the text edit's palette(). */ void Q3TextEdit::setSelectionAttributes(int selNum, const QColor &back, bool invertText) { if (selNum < 1) return; if (selNum > doc->numSelections()) doc->addSelection(selNum); doc->setSelectionColor(selNum, back); if (invertText) doc->setSelectionTextColor(selNum, palette().color(QPalette::HighlightedText)); } /*! \reimp */ void Q3TextEdit::changeEvent(QEvent *ev) { if(ev->type() == QEvent::ActivationChange) { if (!isActiveWindow() && scrollTimer) scrollTimer->stop(); if (!palette().isEqual(QPalette::Active, QPalette::Inactive)) updateContents(); } #ifdef QT_TEXTEDIT_OPTIMIZATION if (d->optimMode && (ev->type() == QEvent::ApplicationFontChange || ev->type() == QEvent::FontChange)) { QFont f = font(); if (f.kerning()) f.setKerning(false); setFont(f); Q3ScrollView::setFont(f); doc->setDefaultFormat(f, doc->formatCollection()->defaultFormat()->color()); // recalculate the max string width QFontMetrics fm(f); int i, sw; d->od->maxLineWidth = 0; for (i = 0; i < d->od->numLines; i++) { sw = fm.width(d->od->lines[LOGOFFSET(i)]); if (d->od->maxLineWidth < sw) d->od->maxLineWidth = sw; } resizeContents(d->od->maxLineWidth + 4, d->od->numLines * fm.lineSpacing() + 1); return; } #endif Q3ScrollView::changeEvent(ev); if (textFormat() == Qt::PlainText) { if (ev->type() == QEvent::ApplicationPaletteChange || ev->type() == QEvent::PaletteChange || ev->type() == QEvent::EnabledChange) { Q3TextFormat *f = doc->formatCollection()->defaultFormat(); f->setColor(palette().text().color()); updateContents(); } } if (ev->type() == QEvent::ApplicationFontChange || ev->type() == QEvent::FontChange) { QFont f = font(); if (f.kerning()) f.setKerning(false); doc->setMinimumWidth(-1); doc->setDefaultFormat(f, doc->formatCollection()->defaultFormat()->color()); lastFormatted = doc->firstParagraph(); formatMore(); repaintChanged(); } } void Q3TextEdit::setReadOnly(bool b) { if (readonly == b) return; readonly = b; d->cursorBlinkActive = !b; #ifndef QT_NO_CURSOR if (readonly) viewport()->setCursor(Qt::ArrowCursor); else viewport()->setCursor(Qt::IBeamCursor); setInputMethodEnabled(!readonly); #endif #ifdef QT_TEXTEDIT_OPTIMIZATION checkOptimMode(); #endif } /*! Scrolls to the bottom of the document and does formatting if required. */ void Q3TextEdit::scrollToBottom() { sync(); setContentsPos(contentsX(), contentsHeight() - visibleHeight()); } /*! Returns the rectangle of the paragraph \a para in contents coordinates, or an invalid rectangle if \a para is out of range. */ QRect Q3TextEdit::paragraphRect(int para) const { Q3TextEdit *that = (Q3TextEdit *)this; that->sync(); Q3TextParagraph *p = doc->paragAt(para); if (!p) return QRect(-1, -1, -1, -1); return p->rect(); } /*! Returns the paragraph which is at position \a pos (in contents coordinates). */ int Q3TextEdit::paragraphAt(const QPoint &pos) const { #ifdef QT_TEXTEDIT_OPTIMIZATION if (d->optimMode) { QFontMetrics fm(Q3ScrollView::font()); int parag = pos.y() / fm.lineSpacing(); if (parag <= d->od->numLines) return parag; else return 0; } #endif Q3TextCursor c(doc); c.place(pos, doc->firstParagraph()); if (c.paragraph()) return c.paragraph()->paragId(); return -1; // should never happen.. } /*! Returns the index of the character (relative to its paragraph) at position \a pos (in contents coordinates). If \a para is not 0, \c{*}\a{para} is set to the character's paragraph. */ int Q3TextEdit::charAt(const QPoint &pos, int *para) const { #ifdef QT_TEXTEDIT_OPTIMIZATION if (d->optimMode) { int par = paragraphAt(pos); if (para) *para = par; return optimCharIndex(d->od->lines[LOGOFFSET(par)], pos.x()); } #endif Q3TextCursor c(doc); c.place(pos, doc->firstParagraph()); if (c.paragraph()) { if (para) *para = c.paragraph()->paragId(); return c.index(); } return -1; // should never happen.. } /*! Sets the background color of the paragraph \a para to \a bg. */ void Q3TextEdit::setParagraphBackgroundColor(int para, const QColor &bg) { Q3TextParagraph *p = doc->paragAt(para); if (!p) return; p->setBackgroundColor(bg); repaintChanged(); } /*! Clears the background color of the paragraph \a para, so that the default color is used again. */ void Q3TextEdit::clearParagraphBackground(int para) { Q3TextParagraph *p = doc->paragAt(para); if (!p) return; p->clearBackgroundColor(); repaintChanged(); } /*! Returns the background color of the paragraph \a para or an invalid color if \a para is out of range or the paragraph has no background set */ QColor Q3TextEdit::paragraphBackgroundColor(int para) const { Q3TextParagraph *p = doc->paragAt(para); if (!p) return QColor(); QColor *c = p->backgroundColor(); if (c) return *c; return QColor(); } /*! \property Q3TextEdit::undoRedoEnabled \brief whether undo/redo is enabled When changing this property, the undo/redo history is cleared. The default is true. */ void Q3TextEdit::setUndoRedoEnabled(bool b) { undoRedoInfo.clear(); doc->commands()->clear(); undoEnabled = b; } bool Q3TextEdit::isUndoRedoEnabled() const { return undoEnabled; } /*! Returns true if undo is available; otherwise returns false. */ bool Q3TextEdit::isUndoAvailable() const { return undoEnabled && (doc->commands()->isUndoAvailable() || undoRedoInfo.valid()); } /*! Returns true if redo is available; otherwise returns false. */ bool Q3TextEdit::isRedoAvailable() const { return undoEnabled && doc->commands()->isRedoAvailable(); } void Q3TextEdit::ensureFormatted(Q3TextParagraph *p) { while (!p->isValid()) { if (!lastFormatted) return; formatMore(); } } /*! \internal */ void Q3TextEdit::updateCursor(const QPoint & pos) { if (isReadOnly() && linksEnabled()) { Q3TextCursor c = *cursor; placeCursor(pos, &c, true); #ifndef QT_NO_NETWORKPROTOCOL bool insideParagRect = true; if (c.paragraph() == doc->lastParagraph() && c.paragraph()->rect().y() + c.paragraph()->rect().height() < pos.y()) insideParagRect = false; if (insideParagRect && c.paragraph() && c.paragraph()->at(c.index()) && c.paragraph()->at(c.index())->isAnchor()) { if (!c.paragraph()->at(c.index())->anchorHref().isEmpty() && c.index() < c.paragraph()->length() - 1) onLink = c.paragraph()->at(c.index())->anchorHref(); else onLink.clear(); if (!c.paragraph()->at(c.index())->anchorName().isEmpty() && c.index() < c.paragraph()->length() - 1) d->onName = c.paragraph()->at(c.index())->anchorName(); else d->onName.clear(); if (!c.paragraph()->at(c.index())->anchorHref().isEmpty()) { #ifndef QT_NO_CURSOR viewport()->setCursor(onLink.isEmpty() ? Qt::ArrowCursor : Qt::PointingHandCursor); #endif QUrl u = QUrl(doc->context()).resolved(onLink); emitHighlighted(u.toString(QUrl::None)); } } else { #ifndef QT_NO_CURSOR viewport()->setCursor(isReadOnly() ? Qt::ArrowCursor : Qt::IBeamCursor); #endif onLink.clear(); emitHighlighted(QString()); } #endif } } /*! Places the cursor \a c at the character which is closest to position \a pos (in contents coordinates). If \a c is 0, the default text cursor is used. \sa setCursorPosition() */ void Q3TextEdit::placeCursor(const QPoint &pos, Q3TextCursor *c) { placeCursor(pos, c, false); } /*! \internal */ void Q3TextEdit::clipboardChanged() { #ifndef QT_NO_CLIPBOARD // don't listen to selection changes disconnect(QApplication::clipboard(), SIGNAL(selectionChanged()), this, 0); #endif selectAll(false); } /*! \property Q3TextEdit::tabChangesFocus \brief whether TAB changes focus or is accepted as input In some occasions text edits should not allow the user to input tabulators or change indentation using the TAB key, as this breaks the focus chain. The default is false. */ void Q3TextEdit::setTabChangesFocus(bool b) { d->tabChangesFocus = b; } bool Q3TextEdit::tabChangesFocus() const { return d->tabChangesFocus; } #ifdef QT_TEXTEDIT_OPTIMIZATION /* Implementation of optimized Qt::LogText mode follows */ static void qSwap(int * a, int * b) { if (!a || !b) return; int tmp = *a; *a = *b; *b = tmp; } /*! \internal */ bool Q3TextEdit::checkOptimMode() { bool oldMode = d->optimMode; if (textFormat() == Qt::LogText) { d->optimMode = true; setReadOnly(true); } else { d->optimMode = false; } // when changing mode - try to keep selections and text if (oldMode != d->optimMode) { if (d->optimMode) { d->od = new Q3TextEditOptimPrivate; connect(scrollTimer, SIGNAL(timeout()), this, SLOT(optimDoAutoScroll())); disconnect(doc, SIGNAL(minimumWidthChanged(int)), this, SLOT(documentWidthChanged(int))); disconnect(scrollTimer, SIGNAL(timeout()), this, SLOT(autoScrollTimerDone())); disconnect(formatTimer, SIGNAL(timeout()), this, SLOT(formatMore())); optimSetText(doc->originalText()); doc->clear(true); delete cursor; cursor = new Q3TextCursor(doc); } else { disconnect(scrollTimer, SIGNAL(timeout()), this, SLOT(optimDoAutoScroll())); connect(doc, SIGNAL(minimumWidthChanged(int)), this, SLOT(documentWidthChanged(int))); connect(scrollTimer, SIGNAL(timeout()), this, SLOT(autoScrollTimerDone())); connect(formatTimer, SIGNAL(timeout()), this, SLOT(formatMore())); setText(optimText()); delete d->od; d->od = 0; } } return d->optimMode; } /*! \internal */ QString Q3TextEdit::optimText() const { QString str, tmp; if (d->od->len == 0) return str; // concatenate all strings int i; int offset; QMap<int,Q3TextEditOptimPrivate::Tag *>::ConstIterator it; Q3TextEditOptimPrivate::Tag * ftag = 0; for (i = 0; i < d->od->numLines; i++) { if (d->od->lines[LOGOFFSET(i)].isEmpty()) { // CR lines are empty str += QLatin1Char('\n'); } else { tmp = d->od->lines[LOGOFFSET(i)] + QLatin1Char('\n'); // inject the tags for this line if ((it = d->od->tagIndex.constFind(LOGOFFSET(i))) != d->od->tagIndex.constEnd()) ftag = it.value(); offset = 0; while (ftag && ftag->line == i) { tmp.insert(ftag->index + offset, QLatin1Char('<') + ftag->tag + QLatin1Char('>')); offset += ftag->tag.length() + 2; // 2 -> the '<' and '>' chars ftag = ftag->next; } str += tmp; } } return str; } /*! \internal */ void Q3TextEdit::optimSetText(const QString &str) { optimRemoveSelection(); // this is just too slow - but may have to go in due to compatibility reasons // if (str == optimText()) // return; d->od->numLines = 0; d->od->lines.clear(); d->od->maxLineWidth = 0; d->od->len = 0; d->od->clearTags(); QFontMetrics fm(Q3ScrollView::font()); if (!(str.isEmpty() || str.isNull() || d->maxLogLines == 0)) { QStringList strl = str.split(QLatin1Char('\n')); int lWidth = 0; for (QStringList::Iterator it = strl.begin(); it != strl.end(); ++it) { optimParseTags(&*it); optimCheckLimit(*it); lWidth = fm.width(*it); if (lWidth > d->od->maxLineWidth) d->od->maxLineWidth = lWidth; } } resizeContents(d->od->maxLineWidth + 4, d->od->numLines * fm.lineSpacing() + 1); repaintContents(); emit textChanged(); } /*! \internal Append \a tag to the tag list. */ Q3TextEditOptimPrivate::Tag * Q3TextEdit::optimAppendTag(int index, const QString & tag) { Q3TextEditOptimPrivate::Tag * t = new Q3TextEditOptimPrivate::Tag, * tmp; if (d->od->tags == 0) d->od->tags = t; t->bold = t->italic = t->underline = false; t->line = d->od->numLines; t->index = index; t->tag = tag; t->leftTag = 0; t->parent = 0; t->prev = d->od->lastTag; if (d->od->lastTag) d->od->lastTag->next = t; t->next = 0; d->od->lastTag = t; tmp = d->od->tagIndex[LOGOFFSET(t->line)]; if (!tmp || (tmp && tmp->index > t->index)) { d->od->tagIndex.insert(LOGOFFSET(t->line), t); } return t; } /*! \internal Insert \a tag in the tag - according to line and index numbers */ Q3TextEditOptimPrivate::Tag *Q3TextEdit::optimInsertTag(int line, int index, const QString &tag) { Q3TextEditOptimPrivate::Tag *t = new Q3TextEditOptimPrivate::Tag, *tmp; if (d->od->tags == 0) d->od->tags = t; t->bold = t->italic = t->underline = false; t->line = line; t->index = index; t->tag = tag; t->leftTag = 0; t->parent = 0; t->next = 0; t->prev = 0; // find insertion pt. in tag struct. QMap<int,Q3TextEditOptimPrivate::Tag *>::ConstIterator it; if ((it = d->od->tagIndex.constFind(LOGOFFSET(line))) != d->od->tagIndex.constEnd()) { tmp = *it; if (tmp->index >= index) { // the existing tag may be placed AFTER the one we want to insert tmp = tmp->prev; } else { while (tmp && tmp->next && tmp->next->line == line && tmp->next->index <= index) tmp = tmp->next; } } else { tmp = d->od->tags; while (tmp && tmp->next && tmp->next->line < line) tmp = tmp->next; if (tmp == d->od->tags) tmp = 0; } t->prev = tmp; t->next = tmp ? tmp->next : 0; if (t->next) t->next->prev = t; if (tmp) tmp->next = t; tmp = d->od->tagIndex[LOGOFFSET(t->line)]; if (!tmp || (tmp && tmp->index >= t->index)) { d->od->tagIndex.insert(LOGOFFSET(t->line), t); } return t; } /*! \internal Find tags in \a line, remove them from \a line and put them in a structure. A tag is delimited by '<' and '>'. The characters '<', '>' and '&' are escaped by using '<', '>' and '&'. Left-tags marks the starting point for formatting, while right-tags mark the ending point. A right-tag is the same as a left-tag, but with a '/' appearing before the tag keyword. E.g a valid left-tag: <b>, and a valid right-tag: </b>. Tags can be nested, but they have to be closed in the same order as they are opened. E.g: <font color=red><font color=blue>blue</font>red</font> - is valid, while: <font color=red><b>bold red</font> just bold</b> - is invalid since the font tag is closed before the bold tag. Note that a tag does not have to be closed: '<font color=blue>Lots of text - and then some..' is perfectly valid for setting all text appearing after the tag to blue. A tag can be used to change the color of a piece of text, or set one of the following formatting attributes: bold, italic and underline. These attributes are set using the <b>, <i> and <u> tags. Example of valid tags: <font color=red>, </font>, <b>, <u>, <i>, </i>. Example of valid text: This is some <font color=red>red text</font>, while this is some <font color=green>green text</font>. <font color=blue><font color=yellow>This is yellow</font>, while this is blue.</font> Note that only the color attribute of the HTML font tag is supported. Limitations: 1. A tag cannot span several lines. 2. Very limited error checking - mismatching left/right-tags is the only thing that is detected. */ void Q3TextEdit::optimParseTags(QString * line, int lineNo, int indexOffset) { int len = line->length(); int i, startIndex = -1, endIndex = -1, escIndex = -1; int state = 0; // 0 = outside tag, 1 = inside tag bool tagOpen, tagClose; int bold = 0, italic = 0, underline = 0; QString tagStr; QStack<Q3TextEditOptimPrivate::Tag *> tagStack; for (i = 0; i < len; i++) { tagOpen = (*line)[i] == QLatin1Char('<'); tagClose = (*line)[i] == QLatin1Char('>'); // handle '<' and '>' and '&' if ((*line)[i] == QLatin1Char('&')) { escIndex = i; continue; } else if (escIndex != -1 && (*line)[i] == QLatin1Char(';')) { QString esc = line->mid(escIndex, i - escIndex + 1); QString c; if (esc == QLatin1String("<")) c = QLatin1Char('<'); else if (esc == QLatin1String(">")) c = QLatin1Char('>'); else if (esc == QLatin1String("&")) c = QLatin1Char('&'); line->replace(escIndex, i - escIndex + 1, c); len = line->length(); i -= i-escIndex; escIndex = -1; continue; } if (state == 0 && tagOpen) { state = 1; startIndex = i; continue; } if (state == 1 && tagClose) { state = 0; endIndex = i; if (!tagStr.isEmpty()) { Q3TextEditOptimPrivate::Tag * tag, * cur, * tmp; bool format = true; if (tagStr == QLatin1String("b")) bold++; else if (tagStr == QLatin1String("/b")) bold--; else if (tagStr == QLatin1String("i")) italic++; else if (tagStr == QLatin1String("/i")) italic--; else if (tagStr == QLatin1String("u")) underline++; else if (tagStr == QLatin1String("/u")) underline--; else format = false; if (lineNo > -1) tag = optimInsertTag(lineNo, startIndex + indexOffset, tagStr); else tag = optimAppendTag(startIndex, tagStr); // everything that is not a b, u or i tag is considered // to be a color tag. tag->type = format ? Q3TextEditOptimPrivate::Format : Q3TextEditOptimPrivate::Color; if (tagStr[0] == QLatin1Char('/')) { // this is a right-tag - search for the left-tag // and possible parent tag cur = tag->prev; if (!cur) { qWarning("Q3TextEdit::optimParseTags: no left-tag for '<%s>' in line %d.", tag->tag.latin1(), tag->line + 1); return; // something is wrong - give up } while (cur) { if (cur->leftTag) { // push right-tags encountered tagStack.push(cur); } else { tmp = tagStack.isEmpty() ? 0 : tagStack.pop(); if (!tmp) { if ((QString(QLatin1Char('/') + cur->tag) == tag->tag) || (tag->tag == QLatin1String("/font") && cur->tag.left(4) == QLatin1String("font"))) { // set up the left and parent of this tag tag->leftTag = cur; tmp = cur->prev; if (tmp && tmp->parent) { tag->parent = tmp->parent; } else if (tmp && !tmp->leftTag) { tag->parent = tmp; } break; } else if (!cur->leftTag) { qWarning("Q3TextEdit::optimParseTags: mismatching %s-tag for '<%s>' in line %d.", qPrintable(QString(cur->tag[0] == QLatin1Char('/') ? QLatin1String("left") : QLatin1String("right"))), cur->tag.latin1(), cur->line + 1); return; // something is amiss - give up } } } cur = cur->prev; } } else { tag->bold = bold > 0; tag->italic = italic > 0; tag->underline = underline > 0; tmp = tag->prev; while (tmp && tmp->leftTag) { tmp = tmp->leftTag->parent; } if (tmp) { tag->bold |= tmp->bold; tag->italic |= tmp->italic; tag->underline |= tmp->underline; } } } if (startIndex != -1) { int l = (endIndex == -1) ? line->length() - startIndex : endIndex - startIndex; line->remove(startIndex, l+1); len = line->length(); i -= l+1; } tagStr = QLatin1String(""); continue; } if (state == 1) { tagStr += (*line)[i]; } } } // calculate the width of a string in pixels inc. tabs static int qStrWidth(const QString& str, int tabWidth, const QFontMetrics& fm) { int tabs = str.count(QLatin1Char('\t')); if (!tabs) return fm.width(str); int newIdx = 0; int lastIdx = 0; int strWidth = 0; int tn; for (tn = 1; tn <= tabs; ++tn) { newIdx = str.indexOf(QLatin1Char('\t'), newIdx); strWidth += fm.width(str.mid(lastIdx, newIdx - lastIdx)); if (strWidth >= tn * tabWidth) { int u = tn; while (strWidth >= u * tabWidth) ++u; strWidth = u * tabWidth; } else { strWidth = tn * tabWidth; } lastIdx = ++newIdx; } if ((int)str.length() > newIdx) strWidth += fm.width(str.mid(newIdx)); return strWidth; } bool Q3TextEdit::optimHasBoldMetrics(int line) { Q3TextEditOptimPrivate::Tag *t; QMap<int,Q3TextEditOptimPrivate::Tag *>::ConstIterator it; if ((it = d->od->tagIndex.constFind(line)) != d->od->tagIndex.constEnd()) { t = *it; while (t && t->line == line) { if (t->bold) return true; t = t->next; } } else if ((t = optimPreviousLeftTag(line)) && t->bold) { return true; } return false; } /*! \internal Append \a str to the current text buffer. Parses each line to find formatting tags. */ void Q3TextEdit::optimAppend(const QString &str) { if (str.isEmpty() || str.isNull() || d->maxLogLines == 0) return; QStringList strl = str.split(QLatin1Char('\n')); QStringList::Iterator it = strl.begin(); QFontMetrics fm(Q3ScrollView::font()); int lWidth = 0; for (; it != strl.end(); ++it) { optimParseTags(&*it); optimCheckLimit(*it); if (optimHasBoldMetrics(d->od->numLines-1)) { QFont fnt = Q3ScrollView::font(); fnt.setBold(true); fm = QFontMetrics(fnt); } lWidth = qStrWidth(*it, tabStopWidth(), fm) + 4; if (lWidth > d->od->maxLineWidth) d->od->maxLineWidth = lWidth; } bool scrollToEnd = contentsY() >= contentsHeight() - visibleHeight(); resizeContents(d->od->maxLineWidth + 4, d->od->numLines * fm.lineSpacing() + 1); if (scrollToEnd) { updateScrollBars(); ensureVisible(contentsX(), contentsHeight(), 0, 0); } // when a max log size is set, the text may not be redrawn because // the size of the viewport may not have changed if (d->maxLogLines > -1) viewport()->update(); emit textChanged(); } static void qStripTags(QString *line) { int len = line->length(); int i, startIndex = -1, endIndex = -1, escIndex = -1; int state = 0; // 0 = outside tag, 1 = inside tag bool tagOpen, tagClose; for (i = 0; i < len; i++) { tagOpen = (*line)[i] == QLatin1Char('<'); tagClose = (*line)[i] == QLatin1Char('>'); // handle '<' and '>' and '&' if ((*line)[i] == QLatin1Char('&')) { escIndex = i; continue; } else if (escIndex != -1 && (*line)[i] == QLatin1Char(';')) { QString esc = line->mid(escIndex, i - escIndex + 1); QString c; if (esc == QLatin1String("<")) c = QLatin1Char('<'); else if (esc == QLatin1String(">")) c = QLatin1Char('>'); else if (esc == QLatin1String("&")) c = QLatin1Char('&'); line->replace(escIndex, i - escIndex + 1, c); len = line->length(); i -= i-escIndex; escIndex = -1; continue; } if (state == 0 && tagOpen) { state = 1; startIndex = i; continue; } if (state == 1 && tagClose) { state = 0; endIndex = i; if (startIndex != -1) { int l = (endIndex == -1) ? line->length() - startIndex : endIndex - startIndex; line->remove(startIndex, l+1); len = line->length(); i -= l+1; } continue; } } } /*! \internal Inserts the text into \a line at index \a index. */ void Q3TextEdit::optimInsert(const QString& text, int line, int index) { if (text.isEmpty() || d->maxLogLines == 0) return; if (line < 0) line = 0; if (line > d->od->numLines-1) line = d->od->numLines-1; if (index < 0) index = 0; if (index > d->od->lines[line].length()) index = d->od->lines[line].length(); QStringList strl = text.split(QLatin1Char('\n')); int numNewLines = strl.count() - 1; Q3TextEditOptimPrivate::Tag *tag = 0; QMap<int,Q3TextEditOptimPrivate::Tag *>::ConstIterator ii; int x; if (numNewLines == 0) { // Case 1. Fast single line case - just inject it! QString stripped = text; qStripTags(&stripped); d->od->lines[LOGOFFSET(line)].insert(index, stripped); // move the tag indices following the insertion pt. if ((ii = d->od->tagIndex.constFind(LOGOFFSET(line))) != d->od->tagIndex.constEnd()) { tag = *ii; while (tag && (LOGOFFSET(tag->line) == line && tag->index < index)) tag = tag->next; while (tag && (LOGOFFSET(tag->line) == line)) { tag->index += stripped.length(); tag = tag->next; } } stripped = text; optimParseTags(&stripped, line, index); } else if (numNewLines > 0) { // Case 2. We have at least 1 newline char - split at // insertion pt. and make room for new lines - complex and slow! QString left = d->od->lines[LOGOFFSET(line)].left(index); QString right = d->od->lines[LOGOFFSET(line)].mid(index); // rearrange lines for insertion for (x = d->od->numLines - 1; x > line; x--) d->od->lines[x + numNewLines] = d->od->lines[x]; d->od->numLines += numNewLines; // fix the tag index and the tag line/index numbers - this // might take a while.. for (x = line; x < d->od->numLines; x++) { if ((ii = d->od->tagIndex.constFind(LOGOFFSET(line))) != d->od->tagIndex.constEnd()) { tag = ii.value(); if (LOGOFFSET(tag->line) == line) while (tag && (LOGOFFSET(tag->line) == line && tag->index < index)) tag = tag->next; } } // relabel affected tags with new line numbers and new index // positions while (tag) { if (LOGOFFSET(tag->line) == line) tag->index -= index; tag->line += numNewLines; tag = tag->next; } // generate a new tag index d->od->tagIndex.clear(); tag = d->od->tags; while (tag) { if (!((ii = d->od->tagIndex.constFind(LOGOFFSET(tag->line))) != d->od->tagIndex.constEnd())) d->od->tagIndex[LOGOFFSET(tag->line)] = tag; tag = tag->next; } // update the tag indices on the spliced line - needs to be done before new tags are added QString stripped = strl[strl.count() - 1]; qStripTags(&stripped); if ((ii = d->od->tagIndex.constFind(LOGOFFSET(line + numNewLines))) != d->od->tagIndex.constEnd()) { tag = *ii; while (tag && (LOGOFFSET(tag->line) == line + numNewLines)) { tag->index += stripped.length(); tag = tag->next; } } // inject the new lines QStringList::Iterator it = strl.begin(); x = line; int idx; for (; it != strl.end(); ++it) { stripped = *it; qStripTags(&stripped); if (x == line) { stripped = left + stripped; idx = index; } else { idx = 0; } d->od->lines[LOGOFFSET(x)] = stripped; optimParseTags(&*it, x++, idx); } d->od->lines[LOGOFFSET(x - 1)] += right; } // recalculate the pixel width of the longest injected line - QFontMetrics fm(Q3ScrollView::font()); int lWidth = 0; for (x = line; x < line + numNewLines; x++) { if (optimHasBoldMetrics(x)) { QFont fnt = Q3ScrollView::font(); fnt.setBold(true); fm = QFontMetrics(fnt); } lWidth = fm.width(d->od->lines[x]) + 4; if (lWidth > d->od->maxLineWidth) d->od->maxLineWidth = lWidth; } resizeContents(d->od->maxLineWidth + 4, d->od->numLines * fm.lineSpacing() + 1); repaintContents(); emit textChanged(); } /*! \internal Returns the first open left-tag appearing before line \a line. */ Q3TextEditOptimPrivate::Tag * Q3TextEdit::optimPreviousLeftTag(int line) { Q3TextEditOptimPrivate::Tag * ftag = 0; QMap<int,Q3TextEditOptimPrivate::Tag *>::ConstIterator it; if ((it = d->od->tagIndex.constFind(LOGOFFSET(line))) != d->od->tagIndex.constEnd()) ftag = it.value(); if (!ftag) { // start searching for an open tag ftag = d->od->tags; while (ftag) { if (ftag->line > line || ftag->next == 0) { if (ftag->line > line) ftag = ftag->prev; break; } ftag = ftag->next; } } else { ftag = ftag->prev; } if (ftag) { if (ftag && ftag->parent) // use the open parent tag ftag = ftag->parent; else if (ftag && ftag->leftTag) // this is a right-tag with no parent ftag = 0; } return ftag; } /*! \internal Set the format for the string starting at index \a start and ending at \a end according to \a tag. If \a tag is a Format tag, find the first open color tag appearing before \a tag and use that tag to color the string. */ void Q3TextEdit::optimSetTextFormat(Q3TextDocument * td, Q3TextCursor * cur, Q3TextFormat * f, int start, int end, Q3TextEditOptimPrivate::Tag * tag) { int formatFlags = Q3TextFormat::Bold | Q3TextFormat::Italic | Q3TextFormat::Underline; cur->setIndex(start); td->setSelectionStart(0, *cur); cur->setIndex(end); td->setSelectionEnd(0, *cur); Q3StyleSheetItem * ssItem = styleSheet()->item(tag->tag); if (!ssItem || tag->type == Q3TextEditOptimPrivate::Format) { f->setBold(tag->bold); f->setItalic(tag->italic); f->setUnderline(tag->underline); if (tag->type == Q3TextEditOptimPrivate::Format) { // check to see if there are any open color tags prior to // this format tag tag = tag->prev; while (tag && (tag->type == Q3TextEditOptimPrivate::Format || tag->leftTag)) { tag = tag->leftTag ? tag->parent : tag->prev; } } if (tag) { QString col = tag->tag.simplified(); if (col.startsWith(QLatin1String("font color"))) { int i = col.indexOf(QLatin1Char('='), 10); col = col.mid(i + 1).simplified(); if (col[0] == QLatin1Char('\"')) col = col.mid(1, col.length() - 2); } QColor color = QColor(col); if (color.isValid()) { formatFlags |= Q3TextFormat::Color; f->setColor(color); } } } else { // use the stylesheet tag definition if (ssItem->color().isValid()) { formatFlags |= Q3TextFormat::Color; f->setColor(ssItem->color()); } f->setBold(ssItem->fontWeight() == QFont::Bold); f->setItalic(ssItem->fontItalic()); f->setUnderline(ssItem->fontUnderline()); } td->setFormat(0, f, formatFlags); td->removeSelection(0); } /*! \internal */ void Q3TextEdit::optimDrawContents(QPainter * p, int clipx, int clipy, int clipw, int cliph) { QFontMetrics fm(Q3ScrollView::font()); int startLine = clipy / fm.lineSpacing(); // we always have to fetch at least two lines for drawing because the // painter may be translated so that parts of two lines cover the area // of a single line int nLines = (cliph / fm.lineSpacing()) + 2; int endLine = startLine + nLines; if (startLine >= d->od->numLines) return; if ((startLine + nLines) > d->od->numLines) nLines = d->od->numLines - startLine; int i = 0; QString str; for (i = startLine; i < (startLine + nLines); i++) str.append(d->od->lines[LOGOFFSET(i)] + QLatin1Char('\n')); Q3TextDocument * td = new Q3TextDocument(0); td->setDefaultFormat(Q3ScrollView::font(), QColor()); td->setPlainText(str); td->setFormatter(new Q3TextFormatterBreakWords); // deleted by QTextDoc td->formatter()->setWrapEnabled(false); td->setTabStops(doc->tabStopWidth()); // get the current text color from the current format td->selectAll(Q3TextDocument::Standard); Q3TextFormat f; f.setColor(palette().text().color()); f.setFont(Q3ScrollView::font()); td->setFormat(Q3TextDocument::Standard, &f, Q3TextFormat::Color | Q3TextFormat::Font); td->removeSelection(Q3TextDocument::Standard); // add tag formatting if (d->od->tags) { int i = startLine; QMap<int,Q3TextEditOptimPrivate::Tag *>::ConstIterator it; Q3TextEditOptimPrivate::Tag * tag = 0, * tmp = 0; Q3TextCursor cur(td); // Step 1 - find previous left-tag tmp = optimPreviousLeftTag(i); for (; i < startLine + nLines; i++) { if ((it = d->od->tagIndex.constFind(LOGOFFSET(i))) != d->od->tagIndex.constEnd()) tag = it.value(); // Step 2 - iterate over tags on the current line int lastIndex = 0; while (tag && tag->line == i) { tmp = 0; if (tag->prev && !tag->prev->leftTag) { tmp = tag->prev; } else if (tag->prev && tag->prev->parent) { tmp = tag->prev->parent; } if ((tag->index - lastIndex) > 0 && tmp) { optimSetTextFormat(td, &cur, &f, lastIndex, tag->index, tmp); } lastIndex = tag->index; tmp = tag; tag = tag->next; } // Step 3 - color last part of the line - if necessary if (tmp && tmp->parent) tmp = tmp->parent; if ((cur.paragraph()->length()-1 - lastIndex) > 0 && tmp && !tmp->leftTag) { optimSetTextFormat(td, &cur, &f, lastIndex, cur.paragraph()->length() - 1, tmp); } cur.setParagraph(cur.paragraph()->next()); } // useful debug info // // tag = d->od->tags; // qWarning("###"); // while (tag) { // qWarning("Tag: %p, parent: %09p, leftTag: %09p, Name: %-15s, ParentName: %s, %d%d%d", tag, // tag->parent, tag->leftTag, tag->tag.latin1(), tag->parent ? tag->parent->tag.latin1():"<none>", // tag->bold, tag->italic, tag->underline); // tag = tag->next; // } } // if there is a selection, make sure that the selection in the // part we need to redraw is set correctly if (optimHasSelection()) { Q3TextCursor c1(td); Q3TextCursor c2(td); int selStart = d->od->selStart.line; int idxStart = d->od->selStart.index; int selEnd = d->od->selEnd.line; int idxEnd = d->od->selEnd.index; if (selEnd < selStart) { qSwap(&selStart, &selEnd); qSwap(&idxStart, &idxEnd); } if (selEnd > d->od->numLines-1) { selEnd = d->od->numLines-1; } if (startLine <= selStart && endLine >= selEnd) { // case 1: area to paint covers entire selection int paragS = selStart - startLine; int paragE = paragS + (selEnd - selStart); Q3TextParagraph * parag = td->paragAt(paragS); if (parag) { c1.setParagraph(parag); if (td->text(paragS).length() >= idxStart) c1.setIndex(idxStart); } parag = td->paragAt(paragE); if (parag) { c2.setParagraph(parag); if (td->text(paragE).length() >= idxEnd) c2.setIndex(idxEnd); } } else if (startLine > selStart && endLine < selEnd) { // case 2: area to paint is all part of the selection td->selectAll(Q3TextDocument::Standard); } else if (startLine > selStart && endLine >= selEnd && startLine <= selEnd) { // case 3: area to paint starts inside a selection, ends past it c1.setParagraph(td->firstParagraph()); c1.setIndex(0); int paragE = selEnd - startLine; Q3TextParagraph * parag = td->paragAt(paragE); if (parag) { c2.setParagraph(parag); if (td->text(paragE).length() >= idxEnd) c2.setIndex(idxEnd); } } else if (startLine <= selStart && endLine < selEnd && endLine > selStart) { // case 4: area to paint starts before a selection, ends inside it int paragS = selStart - startLine; Q3TextParagraph * parag = td->paragAt(paragS); if (parag) { c1.setParagraph(parag); c1.setIndex(idxStart); } c2.setParagraph(td->lastParagraph()); c2.setIndex(td->lastParagraph()->string()->toString().length() - 1); } // previously selected? if (!td->hasSelection(Q3TextDocument::Standard)) { td->setSelectionStart(Q3TextDocument::Standard, c1); td->setSelectionEnd(Q3TextDocument::Standard, c2); } } td->doLayout(p, contentsWidth()); // have to align the painter so that partly visible lines are // drawn at the correct position within the area that needs to be // painted int offset = clipy % fm.lineSpacing() + 2; QRect r(clipx, 0, clipw, cliph + offset); p->translate(0, clipy - offset); td->draw(p, r.x(), r.y(), r.width(), r.height(), palette()); p->translate(0, -(clipy - offset)); delete td; } /*! \internal */ void Q3TextEdit::optimMousePressEvent(QMouseEvent * e) { if (e->button() != Qt::LeftButton) return; QFontMetrics fm(Q3ScrollView::font()); mousePressed = true; mousePos = e->pos(); d->od->selStart.line = e->y() / fm.lineSpacing(); if (d->od->selStart.line > d->od->numLines-1) { d->od->selStart.line = d->od->numLines-1; d->od->selStart.index = d->od->lines[LOGOFFSET(d->od->numLines-1)].length(); } else { QString str = d->od->lines[LOGOFFSET(d->od->selStart.line)]; d->od->selStart.index = optimCharIndex(str, mousePos.x()); } d->od->selEnd.line = d->od->selStart.line; d->od->selEnd.index = d->od->selStart.index; oldMousePos = e->pos(); repaintContents(); } /*! \internal */ void Q3TextEdit::optimMouseReleaseEvent(QMouseEvent * e) { if (e->button() != Qt::LeftButton) return; if (scrollTimer->isActive()) scrollTimer->stop(); if (!inDoubleClick) { QFontMetrics fm(Q3ScrollView::font()); d->od->selEnd.line = e->y() / fm.lineSpacing(); if (d->od->selEnd.line > d->od->numLines-1) { d->od->selEnd.line = d->od->numLines-1; } QString str = d->od->lines[LOGOFFSET(d->od->selEnd.line)]; mousePos = e->pos(); d->od->selEnd.index = optimCharIndex(str, mousePos.x()); if (d->od->selEnd.line < d->od->selStart.line) { qSwap(&d->od->selStart.line, &d->od->selEnd.line); qSwap(&d->od->selStart.index, &d->od->selEnd.index); } else if (d->od->selStart.line == d->od->selEnd.line && d->od->selStart.index > d->od->selEnd.index) { qSwap(&d->od->selStart.index, &d->od->selEnd.index); } oldMousePos = e->pos(); repaintContents(); } if (mousePressed) { mousePressed = false; copyToClipboard(); } inDoubleClick = false; emit copyAvailable(optimHasSelection()); emit selectionChanged(); } /*! \internal */ void Q3TextEdit::optimMouseMoveEvent(QMouseEvent * e) { mousePos = e->pos(); optimDoAutoScroll(); oldMousePos = mousePos; } /*! \internal */ void Q3TextEdit::optimDoAutoScroll() { if (!mousePressed) return; QFontMetrics fm(Q3ScrollView::font()); QPoint pos(mapFromGlobal(QCursor::pos())); bool doScroll = false; int xx = contentsX() + pos.x(); int yy = contentsY() + pos.y(); // find out how much we have to scroll in either dir. if (pos.x() < 0 || pos.x() > viewport()->width() || pos.y() < 0 || pos.y() > viewport()->height()) { int my = yy; if (pos.x() < 0) xx = contentsX() - fm.width(QLatin1Char('w')); else if (pos.x() > viewport()->width()) xx = contentsX() + viewport()->width() + fm.width(QLatin1Char('w')); if (pos.y() < 0) { my = contentsY() - 1; yy = (my / fm.lineSpacing()) * fm.lineSpacing() + 1; } else if (pos.y() > viewport()->height()) { my = contentsY() + viewport()->height() + 1; yy = (my / fm.lineSpacing() + 1) * fm.lineSpacing() - 1; } d->od->selEnd.line = my / fm.lineSpacing(); mousePos.setX(xx); mousePos.setY(my); doScroll = true; } else { d->od->selEnd.line = mousePos.y() / fm.lineSpacing(); } if (d->od->selEnd.line < 0) { d->od->selEnd.line = 0; } else if (d->od->selEnd.line > d->od->numLines-1) { d->od->selEnd.line = d->od->numLines-1; } QString str = d->od->lines[LOGOFFSET(d->od->selEnd.line)]; d->od->selEnd.index = optimCharIndex(str, mousePos.x()); // have to have a valid index before generating a paint event if (doScroll) ensureVisible(xx, yy, 1, 1); // if the text document is smaller than the height of the viewport // - redraw the whole thing otherwise calculate the rect that // needs drawing. if (d->od->numLines * fm.lineSpacing() < viewport()->height()) { repaintContents(contentsX(), contentsY(), width(), height()); } else { int h = QABS(mousePos.y() - oldMousePos.y()) + fm.lineSpacing() * 2; int y; if (oldMousePos.y() < mousePos.y()) { y = oldMousePos.y() - fm.lineSpacing(); } else { // expand paint area for a fully selected line h += fm.lineSpacing(); y = mousePos.y() - fm.lineSpacing()*2; } if (y < 0) y = 0; repaintContents(contentsX(), y, width(), h); } if ((!scrollTimer->isActive() && pos.y() < 0) || pos.y() > height()) scrollTimer->start(100, false); else if (scrollTimer->isActive() && pos.y() >= 0 && pos.y() <= height()) scrollTimer->stop(); } /*! \internal Returns the index of the character in the string \a str that is currently under the mouse pointer. */ int Q3TextEdit::optimCharIndex(const QString &str, int mx) const { QFontMetrics fm(Q3ScrollView::font()); int i = 0; int dd, dist = 10000000; int curpos = 0; int strWidth; mx = mx - 4; // ### get the real margin from somewhere if (!str.contains(QLatin1Char('\t')) && mx > fm.width(str)) return str.length(); while (i < str.length()) { strWidth = qStrWidth(str.left(i), tabStopWidth(), fm); dd = strWidth - mx; if (QABS(dd) <= dist) { dist = QABS(dd); if (mx >= strWidth) curpos = i; } ++i; } return curpos; } /*! \internal */ void Q3TextEdit::optimSelectAll() { d->od->selStart.line = d->od->selStart.index = 0; d->od->selEnd.line = d->od->numLines - 1; d->od->selEnd.index = d->od->lines[LOGOFFSET(d->od->selEnd.line)].length(); repaintContents(); emit copyAvailable(optimHasSelection()); emit selectionChanged(); } /*! \internal */ void Q3TextEdit::optimRemoveSelection() { d->od->selStart.line = d->od->selEnd.line = -1; d->od->selStart.index = d->od->selEnd.index = -1; repaintContents(); } /*! \internal */ void Q3TextEdit::optimSetSelection(int startLine, int startIdx, int endLine, int endIdx) { d->od->selStart.line = startLine; d->od->selEnd.line = endLine; d->od->selStart.index = startIdx; d->od->selEnd.index = endIdx; } /*! \internal */ bool Q3TextEdit::optimHasSelection() const { if (d->od->selStart.line != d->od->selEnd.line || d->od->selStart.index != d->od->selEnd.index) return true; return false; } /*! \internal */ QString Q3TextEdit::optimSelectedText() const { QString str; if (!optimHasSelection()) return str; // concatenate all strings if (d->od->selStart.line == d->od->selEnd.line) { str = d->od->lines[LOGOFFSET(d->od->selEnd.line)].mid(d->od->selStart.index, d->od->selEnd.index - d->od->selStart.index); } else { int i = d->od->selStart.line; str = d->od->lines[LOGOFFSET(i)].right(d->od->lines[LOGOFFSET(i)].length() - d->od->selStart.index) + QLatin1Char('\n'); i++; for (; i < d->od->selEnd.line; i++) { if (d->od->lines[LOGOFFSET(i)].isEmpty()) // CR lines are empty str += QLatin1Char('\n'); else str += d->od->lines[LOGOFFSET(i)] + QLatin1Char('\n'); } str += d->od->lines[LOGOFFSET(d->od->selEnd.line)].left(d->od->selEnd.index); } return str; } /*! \internal */ bool Q3TextEdit::optimFind(const QString & expr, bool cs, bool /*wo*/, bool fw, int * para, int * index) { bool found = false; int parag = para ? *para : d->od->search.line, idx = index ? *index : d->od->search.index, i; if (d->od->len == 0) return false; for (i = parag; fw ? i < d->od->numLines : i >= 0; fw ? i++ : i--) { idx = fw ? d->od->lines[LOGOFFSET(i)].indexOf(expr, idx, cs ? Qt::CaseSensitive : Qt::CaseInsensitive) : d->od->lines[LOGOFFSET(i)].lastIndexOf(expr, idx, cs ? Qt::CaseSensitive : Qt::CaseInsensitive); if (idx != -1) { found = true; break; } else if (fw) idx = 0; } if (found) { if (index) *index = idx; if (para) *para = i; d->od->search.index = idx; d->od->search.line = i; optimSetSelection(i, idx, i, idx + expr.length()); QFontMetrics fm(Q3ScrollView::font()); int h = fm.lineSpacing(); int x = fm.width(d->od->lines[LOGOFFSET(i)].left(idx + expr.length())) + 4; ensureVisible(x, i * h + h / 2, 1, h / 2 + 2); repaintContents(); // could possibly be optimized } return found; } /*! \reimp */ void Q3TextEdit::polishEvent(QEvent*) { // this will ensure that the last line is visible if text have // been added to the widget before it is shown if (d->optimMode) scrollToBottom(); } /*! Sets the maximum number of lines a Q3TextEdit can hold in \c Qt::LogText mode to \a limit. If \a limit is -1 (the default), this signifies an unlimited number of lines. \warning Never use formatting tags that span more than one line when the maximum log lines is set. When lines are removed from the top of the buffer it could result in an unbalanced tag pair, i.e. the left formatting tag is removed before the right one. */ void Q3TextEdit::setMaxLogLines(int limit) { d->maxLogLines = limit; if (d->maxLogLines < -1) d->maxLogLines = -1; if (d->maxLogLines == -1) d->logOffset = 0; } /*! Returns the maximum number of lines Q3TextEdit can hold in \c Qt::LogText mode. By default the number of lines is unlimited, which is signified by a value of -1. */ int Q3TextEdit::maxLogLines() const { return d->maxLogLines; } /*! Check if the number of lines in the buffer is limited, and uphold that limit when appending new lines. */ void Q3TextEdit::optimCheckLimit(const QString& str) { if (d->maxLogLines > -1 && d->maxLogLines <= d->od->numLines) { // NB! Removing the top line in the buffer will potentially // destroy the structure holding the formatting tags - if line // spanning tags are used. Q3TextEditOptimPrivate::Tag *t = d->od->tags, *tmp, *itr; QList<Q3TextEditOptimPrivate::Tag *> lst; while (t) { t->line -= 1; // unhook the ptr from the tag structure if (((uint) LOGOFFSET(t->line) < (uint) d->logOffset && (uint) LOGOFFSET(t->line) < (uint) LOGOFFSET(d->od->numLines) && (uint) LOGOFFSET(d->od->numLines) > (uint) d->logOffset)) { if (t->prev) t->prev->next = t->next; if (t->next) t->next->prev = t->prev; if (d->od->tags == t) d->od->tags = t->next; if (d->od->lastTag == t) { if (t->prev) d->od->lastTag = t->prev; else d->od->lastTag = d->od->tags; } tmp = t; t = t->next; lst.append(tmp); delete tmp; } else { t = t->next; } } // Remove all references to the ptrs we just deleted itr = d->od->tags; while (itr) { for (int i = 0; i < lst.size(); ++i) { tmp = lst.at(i); if (itr->parent == tmp) itr->parent = 0; if (itr->leftTag == tmp) itr->leftTag = 0; } itr = itr->next; } // ...in the tag index as well QMap<int, Q3TextEditOptimPrivate::Tag *>::Iterator idx; if ((idx = d->od->tagIndex.find(d->logOffset)) != d->od->tagIndex.end()) d->od->tagIndex.erase(idx); QMap<int,QString>::Iterator it; if ((it = d->od->lines.find(d->logOffset)) != d->od->lines.end()) { d->od->len -= (*it).length(); d->od->lines.erase(it); d->od->numLines--; d->logOffset = LOGOFFSET(1); } } d->od->len += str.length(); d->od->lines[LOGOFFSET(d->od->numLines++)] = str; } #endif // QT_TEXTEDIT_OPTIMIZATION /*! \property Q3TextEdit::autoFormatting \brief the enabled set of auto formatting features The value can be any combination of the values in the \c AutoFormattingFlag enum. The default is \c AutoAll. Choose \c AutoNone to disable all automatic formatting. Currently, the only automatic formatting feature provided is \c AutoBulletList; future versions of Qt may offer more. */ void Q3TextEdit::setAutoFormatting(AutoFormatting features) { d->autoFormatting = features; } Q3TextEdit::AutoFormatting Q3TextEdit::autoFormatting() const { return d->autoFormatting; } /*! Returns the QSyntaxHighlighter set on this Q3TextEdit. 0 is returned if no syntax highlighter is set. */ Q3SyntaxHighlighter * Q3TextEdit::syntaxHighlighter() const { if (document()->preProcessor()) return ((Q3SyntaxHighlighterInternal *) document()->preProcessor())->highlighter; else return 0; } QT_END_NAMESPACE #endif //QT_NO_TEXTEDIT