/**************************************************************************** ** ** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies). ** All rights reserved. ** Contact: Nokia Corporation (qt-info@nokia.com) ** ** This file is part of the documentation of the Qt Toolkit. ** ** $QT_BEGIN_LICENSE:LGPL$ ** Commercial Usage ** Licensees holding valid Qt Commercial licenses may use this file in ** accordance with the Qt Commercial License Agreement provided with the ** Software or, alternatively, in accordance with the terms contained in ** a written agreement between you and Nokia. ** ** GNU Lesser General Public License Usage ** Alternatively, this file may be used under the terms of the GNU Lesser ** General Public License version 2.1 as published by the Free Software ** Foundation and appearing in the file LICENSE.LGPL included in the ** packaging of this file. Please review the following information to ** ensure the GNU Lesser General Public License version 2.1 requirements ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. ** ** In addition, as a special exception, Nokia gives you certain additional ** rights. These rights are described in the Nokia Qt LGPL Exception ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package. ** ** GNU General Public License Usage ** Alternatively, this file may be used under the terms of the GNU ** General Public License version 3.0 as published by the Free Software ** Foundation and appearing in the file LICENSE.GPL included in the ** packaging of this file. Please review the following information to ** ensure the GNU General Public License version 3.0 requirements will be ** met: http://www.gnu.org/copyleft/gpl.html. ** ** If you have questions regarding the use of this file, please contact ** Nokia at qt-info@nokia.com. ** $QT_END_LICENSE$ ** ****************************************************************************/ /*! \class Q3AsciiCache \brief The Q3AsciiCache class is a template class that provides a cache based on char* keys. \compat Q3AsciiCache is implemented as a template class. Define a template instance Q3AsciiCache\ to create a cache that operates on pointers to X (X*). A cache is a least recently used (LRU) list of cache items. The cache items are accessed via \c char* keys. For Unicode keys use the Q3Cache template instead, which uses QString keys. A Q3Cache has the same performace as a Q3AsciiCache. Each cache item has a cost. The sum of item costs, totalCost(), will not exceed the maximum cache cost, maxCost(). If inserting a new item would cause the total cost to exceed the maximum cost, the least recently used items in the cache are removed. Apart from insert(), by far the most important function is find() (which also exists as operator[]()). This function looks up an item, returns it, and by default marks it as being the most recently used item. There are also methods to remove() or take() an object from the cache. Calling \link Q3PtrCollection::setAutoDelete() setAutoDelete(TRUE)\endlink tells the cache to delete items that are removed. The default is to not delete items when then are removed (i.e., remove() and take() are equivalent). When inserting an item into the cache, only the pointer is copied, not the item itself. This is called a shallow copy. It is possible to make the cache copy all of the item's data (known as a deep copy) when an item is inserted. insert() calls the virtual function Q3PtrCollection::newItem() for the item to be inserted. Inherit a cache and reimplement newItem() if you want deep copies. When removing a cache item the virtual function Q3PtrCollection::deleteItem() is called. Its default implementation in Q3AsciiCache is to delete the item if \link Q3PtrCollection::setAutoDelete() auto-deletion\endlink is enabled. There is a Q3AsciiCacheIterator which may be used to traverse the items in the cache in arbitrary order. \sa Q3AsciiCacheIterator, Q3Cache, Q3IntCache */ /*! \fn Q3AsciiCache::Q3AsciiCache( const Q3AsciiCache &c ) \internal Do not use. A Q3AsciiCache cannot be copied. Calls qFatal() in debug version. */ /*! \fn Q3AsciiCache::Q3AsciiCache( int maxCost, int size, bool caseSensitive, bool copyKeys ) Constructs a cache whose contents will never have a total cost greater than \a maxCost and which is expected to contain less than \a size items. \a size is actually the size of an internal hash array; it's usually best to make it prime and at least 50% bigger than the largest expected number of items in the cache. Each inserted item has an associated cost. When inserting a new item, if the total cost of all items in the cache will exceed \a maxCost, the cache will start throwing out the older (least recently used) items until there is enough room for the new item to be inserted. If \a caseSensitive is TRUE (the default), the cache keys are case sensitive; if it is FALSE, they are case-insensitive. Case-insensitive comparison only affects the 26 letters in US-ASCII. If \a copyKeys is TRUE (the default), Q3AsciiCache makes a copy of the cache keys, otherwise it copies just the const char * pointer - slightly faster if you can guarantee that the keys will never change, but very risky. */ /*! \fn Q3AsciiCache::~Q3AsciiCache() Removes all items from the cache and destroys it. All iterators that access this cache will be reset. */ /*! \fn Q3AsciiCache& Q3AsciiCache::operator=( const Q3AsciiCache &c ) \internal Do not use. A Q3AsciiCache cannot be copied. Calls qFatal() in debug version. */ /*! \fn int Q3AsciiCache::maxCost() const Returns the maximum allowed total cost of the cache. \sa setMaxCost() totalCost() */ /*! \fn int Q3AsciiCache::totalCost() const Returns the total cost of the items in the cache. This is an integer in the range 0 to maxCost(). \sa setMaxCost() */ /*! \fn void Q3AsciiCache::setMaxCost( int m ) Sets the maximum allowed total cost of the cache to \a m. If the current total cost is greater than \a m, some items are removed immediately. \sa maxCost() totalCost() */ /*! \fn uint Q3AsciiCache::count() const Returns the number of items in the cache. \sa totalCost() size() */ /*! \fn uint Q3AsciiCache::size() const Returns the size of the hash array used to implement the cache. This should be a bit bigger than count() is likely to be. */ /*! \fn bool Q3AsciiCache::isEmpty() const Returns TRUE if the cache is empty; otherwise returns FALSE. */ /*! \fn bool Q3AsciiCache::insert( const char *k, const type *d, int c, int p ) Inserts the item \a d into the cache using key \a k, and with an associated cost of \a c. Returns TRUE if the item is successfully inserted. Returns FALSE if the item is not inserted, for example, if the cost of the item exceeds maxCost(). The cache's size is limited, and if the total cost is too high, Q3AsciiCache will remove old, least recently used items until there is room for this new item. Items with duplicate keys can be inserted. The parameter \a p is internal and should be left at the default value (0). \warning If this function returns FALSE, you must delete \a d yourself. Additionally, be very careful about using \a d after calling this function, because any other insertions into the cache, from anywhere in the application or within Qt itself, could cause the object to be discarded from the cache and the pointer to become invalid. */ /*! \fn bool Q3AsciiCache::remove( const char *k ) Removes the item with key \a k and returns TRUE if the item was present in the cache; otherwise returns FALSE. The item is deleted if auto-deletion has been enabled, i.e., if you have called \link Q3PtrCollection::setAutoDelete() setAutoDelete(TRUE)\endlink. If there are two or more items with equal keys, the one that was inserted last is removed. All iterators that refer to the removed item are set to point to the next item in the cache's traversal order. \sa take(), clear() */ /*! \fn type *Q3AsciiCache::take( const char *k ) Takes the item associated with \a k out of the cache without deleting it and returns a pointer to the item taken out, or 0 if the key does not exist in the cache. If there are two or more items with equal keys, the one that was inserted last is taken. All iterators that refer to the taken item are set to point to the next item in the cache's traversal order. \sa remove(), clear() */ /*! \fn void Q3AsciiCache::clear() Removes all items from the cache, and deletes them if \link Q3PtrCollection::setAutoDelete() auto-deletion\endlink has been enabled. All cache iterators that operate on this cache are reset. \sa remove() take() */ /*! \fn type *Q3AsciiCache::find( const char *k, bool ref ) const Returns the item with key \a k, or 0 if the key does not exist in the cache. If \a ref is TRUE (the default), the item is moved to the front of the least recently used list. If there are two or more items with equal keys, the one that was inserted last is returned. */ /*! \fn type *Q3AsciiCache::operator[]( const char *k ) const Returns the item with key \a k, or 0 if \a k does not exist in the cache, and moves the item to the front of the least recently used list. If there are two or more items with equal keys, the one that was inserted last is returned. This is the same as find( k, TRUE ). \sa find() */ /*! \fn void Q3AsciiCache::statistics() const A debug-only utility function. Prints out cache usage, hit/miss, and distribution information using qDebug(). This function does nothing in the release library. */ /*! \class Q3AsciiCacheIterator \brief The Q3AsciiCacheIterator class provides an iterator for Q3AsciiCache collections. \compat Note that the traversal order is arbitrary; you are not guaranteed any particular order. If new objects are inserted into the cache while the iterator is active, the iterator may or may not see them. Multiple iterators are completely independent, even when they operate on the same Q3AsciiCache. Q3AsciiCache updates all iterators that refer an item when that item is removed. Q3AsciiCacheIterator provides an operator++() and an operator+=() to traverse the cache; current() and currentKey() to access the current cache item and its key. It also provides atFirst() and atLast(), which return TRUE if the iterator points to the first or last item in the cache respectively. The isEmpty() function returns TRUE if the cache is empty; and count() returns the number of items in the cache. Note that atFirst() and atLast() refer to the iterator's arbitrary ordering, not to the cache's internal least recently used list. \sa Q3AsciiCache */ /*! \fn Q3AsciiCacheIterator::Q3AsciiCacheIterator( const Q3AsciiCache &cache ) Constructs an iterator for \a cache. The current iterator item is set to point to the first item in the \a cache. */ /*! \fn Q3AsciiCacheIterator::Q3AsciiCacheIterator (const Q3AsciiCacheIterator & ci) Constructs an iterator for the same cache as \a ci. The new iterator starts at the same item as ci.current() but moves independently from there on. */ /*! \fn Q3AsciiCacheIterator& Q3AsciiCacheIterator::operator=( const Q3AsciiCacheIterator &ci ) Makes this an iterator for the same cache as \a ci. The new iterator starts at the same item as ci.current(), but moves independently thereafter. */ /*! \fn uint Q3AsciiCacheIterator::count() const Returns the number of items in the cache over which this iterator operates. \sa isEmpty() */ /*! \fn bool Q3AsciiCacheIterator::isEmpty() const Returns TRUE if the cache is empty, i.e. count() == 0; otherwise returns FALSE. \sa count() */ /*! \fn bool Q3AsciiCacheIterator::atFirst() const Returns TRUE if the iterator points to the first item in the cache; otherwise returns FALSE. Note that this refers to the iterator's arbitrary ordering, not to the cache's internal least recently used list. \sa toFirst(), atLast() */ /*! \fn bool Q3AsciiCacheIterator::atLast() const Returns TRUE if the iterator points to the last item in the cache; otherwise returns FALSE. Note that this refers to the iterator's arbitrary ordering, not to the cache's internal least recently used list. \sa toLast(), atFirst() */ /*! \fn type *Q3AsciiCacheIterator::toFirst() Sets the iterator to point to the first item in the cache and returns a pointer to the item. Sets the iterator to 0 and returns 0 if the cache is empty. \sa toLast() isEmpty() */ /*! \fn type *Q3AsciiCacheIterator::toLast() Sets the iterator to point to the last item in the cache and returns a pointer to the item. Sets the iterator to 0 and returns 0 if the cache is empty. \sa toFirst() isEmpty() */ /*! \fn Q3AsciiCacheIterator::operator type *() const Cast operator. Returns a pointer to the current iterator item. Same as current(). */ /*! \fn type *Q3AsciiCacheIterator::current() const Returns a pointer to the current iterator item. */ /*! \fn const char *Q3AsciiCacheIterator::currentKey() const Returns the key for the current iterator item. */ /*! \fn type *Q3AsciiCacheIterator::operator()() Makes the succeeding item current and returns the original current item. If the current iterator item was the last item in the cache or if it was 0, 0 is returned. */ /*! \fn type *Q3AsciiCacheIterator::operator+=( uint jump ) Returns the item \a jump positions after the current item, or 0 if it is beyond the last item. Makes this the current item. */ /*! \fn type *Q3AsciiCacheIterator::operator-=( uint jump ) Returns the item \a jump positions before the current item, or 0 if it is before the first item. Makes this the current item. */ /*! \fn type *Q3AsciiCacheIterator::operator++() Prefix ++ makes the iterator point to the item just after current(), and makes that the new current item for the iterator. If current() was the last item, operator++() returns 0. */ /*! \fn type *Q3AsciiCacheIterator::operator--() Prefix -- makes the iterator point to the item just before current(), and makes that the new current item for the iterator. If current() was the first item, operator--() returns 0. */