/**************************************************************************** ** ** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies). ** All rights reserved. ** Contact: Nokia Corporation (qt-info@nokia.com) ** ** This file is part of the test suite of the Qt Toolkit. ** ** $QT_BEGIN_LICENSE:LGPL$ ** No Commercial Usage ** This file contains pre-release code and may not be distributed. ** You may use this file in accordance with the terms and conditions ** contained in the Technology Preview License Agreement accompanying ** this package. ** ** GNU Lesser General Public License Usage ** Alternatively, this file may be used under the terms of the GNU Lesser ** General Public License version 2.1 as published by the Free Software ** Foundation and appearing in the file LICENSE.LGPL included in the ** packaging of this file. Please review the following information to ** ensure the GNU Lesser General Public License version 2.1 requirements ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. ** ** In addition, as a special exception, Nokia gives you certain additional ** rights. These rights are described in the Nokia Qt LGPL Exception ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package. ** ** If you have questions regarding the use of this file, please contact ** Nokia at qt-info@nokia.com. ** ** ** ** ** ** ** ** ** $QT_END_LICENSE$ ** ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include "../../shared/util.h" #define WAITS 1 #ifdef WAITS #endif Q_DECLARE_METATYPE(QPoint) //TESTED_FILES= QT_FORWARD_DECLARE_CLASS(Q3Table) class tst_Q3Table : public QObject { Q_OBJECT public: tst_Q3Table(); public slots: void initTestCase(); void cleanupTestCase(); void init(); void cleanup(); private slots: void setNumRowsColsItems(); void setNumRowsColsWidgets(); void selection(); void selectComboTableItem_data(); void selectComboTableItem(); void pageUpDownNavigation_data(); void pageUpDownNavigation(); void simpleKeyboardNavigation(); void setRowStretchable(); void setColumnStretchable(); void selectRow_data(); void selectRow(); void selectColumn_data(); void selectColumn(); void removeSelection_selectionChanged(); void cellNavigation(); void cellNavigationWhileEditing(); void removeRow_data(); void removeRow(); void swapRowMemoryLeak(); void insertRows_data(); void insertRows(); void editCheck(); void setCellWidgetFocus(); void selectionWithMouse_data(); void selectionWithMouse(); void valueChanged(); void numSelections(); // Task specific, moreNumSelections() should cover all bases void dateTimeEdit(); void onValueChanged(int, int); void moreNumSelections_data(); void moreNumSelections(); void headerSwapIconset(); void propagateEscapeKey(); public slots: void selectionWasChanged(); private: void setupTableItems(); Q3Table *testWidget; bool isValueChanged, receivedSelectionChanged; }; Q_DECLARE_METATYPE(Q3Table::SelectionMode); #if 0 /* XPM */ static const char *fileopen[] = { " 16 13 5 1", ". c #040404", "# c #808304", "a c None", "b c #f3f704", "c c #f3f7f3", "aaaaaaaaa...aaaa", "aaaaaaaa.aaa.a.a", "aaaaaaaaaaaaa..a", "a...aaaaaaaa...a", ".bcb.......aaaaa", ".cbcbcbcbc.aaaaa", ".bcbcbcbcb.aaaaa", ".cbcb...........", ".bcb.#########.a", ".cb.#########.aa", ".b.#########.aaa", "..#########.aaaa", "...........aaaaa" }; #endif tst_Q3Table::tst_Q3Table() : isValueChanged( false ) { } void tst_Q3Table::initTestCase() { } void tst_Q3Table::cleanupTestCase() { } void tst_Q3Table::init() { // Reset the table testWidget = new Q3Table(4,4,0,"testWidget"); testWidget->show(); #ifdef Q_WS_X11 qt_x11_wait_for_window_manager( testWidget ); #endif } void tst_Q3Table::cleanup() { testWidget->hide(); delete testWidget; testWidget = 0; } /* Function that will popuplate the testWidget with a variety of Q3TableItems */ void tst_Q3Table::setupTableItems() { QStringList list; list << "A" << "B"; Q3ComboTableItem *cbi = new Q3ComboTableItem(testWidget, list); testWidget->setItem(1, 1, cbi); Q3ComboTableItem *ecbi = new Q3ComboTableItem(testWidget, list, TRUE); testWidget->setItem(1, 2, ecbi); Q3CheckTableItem *chi = new Q3CheckTableItem(testWidget, "Check"); testWidget->setItem(2, 2, chi); Q3TableItem *ne = new Q3TableItem(testWidget, Q3TableItem::Never, "Never"); testWidget->setItem(0, 0, ne); Q3TableItem *ot = new Q3TableItem(testWidget, Q3TableItem::OnTyping, "On Typing"); testWidget->setItem(0, 1, ot); Q3TableItem *wc = new Q3TableItem(testWidget, Q3TableItem::WhenCurrent, "When Current"); testWidget->setItem(0, 2, wc); Q3TableItem *al = new Q3TableItem(testWidget, Q3TableItem::Always, "Always"); testWidget->setItem(0, 3, al); } #define CELL_TEXT(r, c) QString::number( r ) + "/" + QString::number( c ) void tst_Q3Table::setNumRowsColsItems() { Q3Table *t = new Q3Table( 0, "test_table" ); const int initial_num_rows = 4; const int initial_num_cols = 4; const int larger_num_rows = 8; const int larger_num_cols = 8; const int smaller_num_rows = 3; const int smaller_num_cols = 3; t->setNumRows( initial_num_cols ); t->setNumCols( initial_num_cols ); QCOMPARE( t->numRows(), initial_num_rows ); QCOMPARE( t->numCols(), initial_num_cols ); int r, c; for ( r = 0; r < initial_num_rows; ++r ) { for ( c = 0; c < initial_num_cols; ++c ) { t->setText( r, c, CELL_TEXT( r, c ) ); } } for ( r = 0; r < initial_num_rows; ++r ) { for ( c = 0; c < initial_num_cols; ++c ) { QCOMPARE( t->text( r, c ), CELL_TEXT( r, c ) ); } } t->setNumRows( larger_num_rows ); for ( r = 0; r < larger_num_rows; ++r ) { for ( c = 0; c < initial_num_cols; ++c ) { if ( r < initial_num_rows && c < initial_num_cols ) { QCOMPARE( t->text( r, c ), CELL_TEXT( r, c ) ); } else { QCOMPARE( t->text( r, c ), QString() ); } } } t->setNumCols( larger_num_cols ); for ( r = 0; r < larger_num_rows; ++r ) { for ( c = 0; c < larger_num_cols; ++c ) { if ( r < initial_num_rows && c < initial_num_cols ) { QCOMPARE( t->text( r, c ), CELL_TEXT( r, c ) ); } else { QCOMPARE( t->text( r, c ), QString() ); } } } t->setNumRows( smaller_num_rows ); for ( r = 0; r < smaller_num_rows; ++r ) { for ( c = 0; c < initial_num_cols; ++c ) { QCOMPARE( t->text( r, c ), CELL_TEXT( r, c ) ); } } t->setNumCols( smaller_num_cols ); for ( r = 0; r < smaller_num_rows; ++r ) { for ( c = 0; c < smaller_num_cols; ++c ) { QCOMPARE( t->text( r, c ), CELL_TEXT( r, c ) ); } } delete t; } void tst_Q3Table::setNumRowsColsWidgets() { Q3Table *t = new Q3Table( 0, "test_table" ); const int initial_num_rows = 4; const int initial_num_cols = 4; const int larger_num_rows = 8; const int larger_num_cols = 8; const int smaller_num_rows = 3; const int smaller_num_cols = 3; t->setNumRows( initial_num_cols ); t->setNumCols( initial_num_cols ); QCOMPARE( t->numRows(), initial_num_rows ); QCOMPARE( t->numCols(), initial_num_cols ); int r, c; for ( r = 0; r < initial_num_rows; ++r ) { for ( c = 0; c < initial_num_cols; ++c ) { t->setCellWidget( r, c, new QWidget( t, CELL_TEXT( r, c ) ) ); } } for ( r = 0; r < initial_num_rows; ++r ) { for ( c = 0; c < initial_num_cols; ++c ) { QCOMPARE( QString( t->cellWidget( r, c )->name() ), CELL_TEXT( r, c ) ); } } t->setNumRows( larger_num_rows ); for ( r = 0; r < larger_num_rows; ++r ) { for ( c = 0; c < initial_num_cols; ++c ) { if ( r < initial_num_rows && c < initial_num_cols ) { QCOMPARE( QString( t->cellWidget( r, c )->name() ), CELL_TEXT( r, c ) ); } else { QCOMPARE( t->cellWidget( r, c ), (QWidget*)0 ); } } } t->setNumCols( larger_num_cols ); for ( r = 0; r < larger_num_rows; ++r ) { for ( c = 0; c < larger_num_cols; ++c ) { if ( r < initial_num_rows && c < initial_num_cols ) { QCOMPARE( QString( t->cellWidget( r, c )->name() ), CELL_TEXT( r, c ) ); } else { QCOMPARE( t->cellWidget( r, c ), (QWidget*)0 ); } } } t->setNumRows( smaller_num_rows ); for ( r = 0; r < smaller_num_rows; ++r ) { for ( c = 0; c < initial_num_cols; ++c ) { QCOMPARE( QString( t->cellWidget( r, c )->name() ), CELL_TEXT( r, c ) ); } } t->setNumCols( smaller_num_cols ); for ( r = 0; r < smaller_num_rows; ++r ) { for ( c = 0; c < smaller_num_cols; ++c ) { QCOMPARE( QString( t->cellWidget( r, c )->name() ), CELL_TEXT( r, c ) ); } } delete t; } void tst_Q3Table::selection() { Q3Table *t = new Q3Table( 20, 20, 0, "test_table" ); t->selectCells( 0, 0, 50, 50 ); Q3TableSelection sel( 60, 60, 100, 100 ); t->addSelection( sel ); t->show(); QCOMPARE( t->numSelections(), 2 ); delete t; } void tst_Q3Table::selectComboTableItem_data() { QTest::addColumn("editable"); QTest::newRow( "editable" ) << TRUE; QTest::newRow( "non-editable" ) << FALSE; } class MyTable : public Q3Table { // Conveience subclass used to be able to call isEditing() public: MyTable(int rows,int cols,QWidget *parent = 0,const char *name = 0) : Q3Table(rows,cols,parent,name) {} bool isEditing() { return Q3Table::isEditing(); } }; void tst_Q3Table::selectComboTableItem() { #if 0 MyTable table(4,4,0,"subclassTestWidget"); // Test for task #25026 QFETCH( bool, editable ); QStringList strings; strings << "One" << "Two" << "Three" << "Four"; QComboTableItem *cbi = new QComboTableItem(testWidget,strings,editable); table.setItem(0,0,cbi); table.hide(); table.show(); QComboBox *cb; if ( !editable ) cb = (QComboBox*)table.viewport()->child("qt_editor_cb","QComboBox"); else cb = (QComboBox*)table.cellWidget(0,0); QVERIFY( cb ); QCOMPARE(table.text(0,0),QString("One")); QTest::mouseClick(cb,QtTestCase::LeftButton,QtTestCase::NoButton,QPoint(cb->width()-7,cb->height()-5)); QVERIFY(cb->listBox()->isVisible()); QTest::mouseClick(cb->listBox()->viewport(),QtTestCase::LeftButton,QtTestCase::NoButton,QPoint(5,cb->listBox()->height()-5)); QCOMPARE(table.text(0,0),QString("Four")); // Ensure the edit is accepted QTest::mouseClick(table.viewport(),QtTestCase::LeftButton,QtTestCase::NoButton,QPoint(table.width()-10,table.height()-10)); QVERIFY(!table.isEditing()); QCOMPARE(table.text(0,0),QString("Four")); // Now check that Escape will revert any changes QTest::mouseClick(cb,QtTestCase::LeftButton,QtTestCase::NoButton,QPoint(cb->width()-7,cb->height()-5)); QVERIFY(cb->listBox()->isVisible()); QTest::mouseClick(cb->listBox()->viewport(),QtTestCase::LeftButton,QtTestCase::NoButton,QPoint(5,5)); QCOMPARE(cb->currentText(),QString("One")); QTest::keyClick(cb,Qt::Key_Escape); QVERIFY(!table.isEditing()); QCOMPARE(table.text(0,0),QString("Four")); #else QSKIP("This test will fail at the moment since the way qtestlib iss handling mouse events is broken",SkipAll); #endif } void tst_Q3Table::pageUpDownNavigation_data() { QTest::addColumn("selectionMode"); QTest::addColumn("activeSelection"); QTest::addColumn("pgUpTopRow"); QTest::addColumn("pgUpBottomRow"); QTest::addColumn("pgUpLeftCol"); QTest::addColumn("pgUpRightCol"); QTest::addColumn("pgDownTopRow"); QTest::addColumn("pgDownBottomRow"); QTest::addColumn("pgDownLeftCol"); QTest::addColumn("pgDownRightCol"); QTest::newRow("NoSelection") << Q3Table::NoSelection << FALSE << -1 << -1 << -1 << -1 << -1 << -1 << -1 << -1; QTest::newRow("SingleSelection") << Q3Table::Single << FALSE << -1 << -1 << -1 << -1 << -1 << -1 << -1 << -1; QTest::newRow("MultiSelection") << Q3Table::Multi << FALSE << -1 << -1 << -1 << -1 << -1 << -1 << -1 << -1; QTest::newRow("SingleRowSelection") << Q3Table::SingleRow << TRUE << 0 << 0 << 0 << 3 << 3 << 3 << 0 << 3; QTest::newRow("MultiRowSelection") << Q3Table::MultiRow << TRUE << 0 << 0 << 0 << 3 << 3 << 3 << 0 << 3; } void tst_Q3Table::pageUpDownNavigation() { setupTableItems(); // Test for task #25842 QFETCH(Q3Table::SelectionMode,selectionMode); QFETCH(bool,activeSelection); QFETCH(int,pgUpTopRow); QFETCH(int,pgUpBottomRow); QFETCH(int,pgUpLeftCol); QFETCH(int,pgUpRightCol); QFETCH(int,pgDownTopRow); QFETCH(int,pgDownBottomRow); QFETCH(int,pgDownLeftCol); QFETCH(int,pgDownRightCol); // Needed to force the table to have "no selection" testWidget->setCurrentCell(-1,-1); testWidget->setSelectionMode(selectionMode); #ifdef WAITS QTest::qWait(50); #endif QTest::keyClick(testWidget->viewport(),Qt::Key_PageUp); #ifdef WAITS QTest::qWait(50); #endif Q3TableSelection ts = testWidget->selection(testWidget->currentSelection()); QVERIFY(ts.isActive() == activeSelection); if (activeSelection) { QVERIFY(ts.topRow() == pgUpTopRow); QVERIFY(ts.bottomRow() == pgUpBottomRow); QVERIFY(ts.leftCol() == pgUpLeftCol); QVERIFY(ts.rightCol() == pgUpRightCol); } QTest::keyClick(testWidget->viewport(),Qt::Key_PageDown); #ifdef WAITS QTest::qWait(50); #endif ts = testWidget->selection(testWidget->currentSelection()); QVERIFY(ts.isActive() == activeSelection); if (activeSelection) { QVERIFY(ts.topRow() == pgDownTopRow); QVERIFY(ts.bottomRow() == pgDownBottomRow); QVERIFY(ts.leftCol() == pgDownLeftCol); QVERIFY(ts.rightCol() == pgDownRightCol); } } void tst_Q3Table::simpleKeyboardNavigation() { QApplication::setActiveWindow(testWidget); QTRY_COMPARE(QApplication::activeWindow(), static_cast(testWidget)); QWidget *w; // Test for task #24726 #ifdef WAITS QTest::qWait(50); #endif QTest::mouseClick(testWidget->viewport(), Qt::LeftButton, Qt::NoModifier, QPoint(testWidget->columnPos(0) + 3, testWidget->rowPos(0) + 3)); #ifdef WAITS QTest::qWait(50); #endif QCOMPARE(testWidget->currentColumn(), 0); QCOMPARE(testWidget->currentRow(), 0); QTest::keyClick(testWidget->viewport(), Qt::Key_T); // After the first keyevent, the table starts editing the item w = testWidget->cellWidget(0, 0); QVERIFY(w); #ifdef WAITS QTest::qWait(50); #endif QTest::keyClick(w, Qt::Key_E); #ifdef WAITS QTest::qWait(50); #endif QTest::keyClick(w, Qt::Key_C); #ifdef WAITS QTest::qWait(50); #endif QTest::keyClick(w, Qt::Key_H); #ifdef WAITS QTest::qWait(50); #endif #ifdef Q_WS_MAC // Mac lineedits grab Up and Down QTest::keyClick(w, Qt::Key_Return); #else QTest::keyClick(testWidget->viewport(), Qt::Key_Down); #endif #ifdef WAITS QTest::qWait(50); #endif QCOMPARE(testWidget->text(0,0), QString("tech")); QCOMPARE(testWidget->currentColumn(), 0); QCOMPARE(testWidget->currentRow(), 1); QTest::keyClick(testWidget->viewport(), Qt::Key_A); w = testWidget->cellWidget(0, 1); #ifdef WAITS QTest::qWait(50); #endif QTest::keyClick(w, Qt::Key_B); #ifdef WAITS QTest::qWait(50); #endif QTest::keyClick(w, Qt::Key_C); #ifdef WAITS QTest::qWait(50); #endif #ifdef Q_WS_MAC // Mac lineedits grab Up and Down QTest::keyClick(w, Qt::Key_Return); QTest::keyClick(testWidget->viewport(), Qt::Key_Up); QTest::keyClick(testWidget->viewport(), Qt::Key_Up); #else QTest::keyClick(w, Qt::Key_Up); #endif #ifdef WAITS QTest::qWait(50); #endif QCOMPARE(testWidget->text(1,0), QString("abc")); QCOMPARE(testWidget->currentColumn(), 0); QCOMPARE(testWidget->currentRow(), 0); w = testWidget->cellWidget(0, 0); QTest::keyClick(w, Qt::Key_D); #ifdef WAITS QTest::qWait(50); #endif QTest::keyClick(w, Qt::Key_E); #ifdef WAITS QTest::qWait(50); #endif QTest::keyClick(w, Qt::Key_F); #ifdef WAITS QTest::qWait(50); #endif #ifdef Q_WS_MAC // Mac lineedits grab Up and Down QTest::keyClick(w, Qt::Key_Return); #else QTest::keyClick(w, Qt::Key_Down); #endif #ifdef WAITS QTest::qWait(50); #endif QCOMPARE(testWidget->text(0,0), QString("def")); QCOMPARE(testWidget->currentColumn(), 0); QCOMPARE(testWidget->currentRow(), 1); } void tst_Q3Table::setRowStretchable() { #if 1 QSKIP("This test currently fails on all versions", SkipAll); #endif // Part of test for task 24471 // Only tests TRUE case, need FALSE case written // Also needs to test the case where the user tries to resize it testWidget->setRowStretchable(0,TRUE); testWidget->show(); int height = testWidget->rowHeight(0); testWidget->setRowHeight(0,height * 2); QCOMPARE(height,testWidget->rowHeight(0)); } void tst_Q3Table::setColumnStretchable() { #if 1 QSKIP("This test currently fails on all versions", SkipAll); #endif // Part of test for task 24471 // Only tests TRUE case, need FALSE case written // Also needs to test the case where the user tries to resize it testWidget->setColumnStretchable(0,TRUE); testWidget->show(); int width = testWidget->columnWidth(0); testWidget->setColumnWidth(0,width * 2); QCOMPARE(width,testWidget->columnWidth(0)); } void tst_Q3Table::selectRow_data() { QTest::addColumn("selectionMode"); QTest::addColumn("activeSelection"); QTest::addColumn("topRow"); QTest::addColumn("bottomRow"); QTest::addColumn("leftCol"); QTest::addColumn("rightCol"); QTest::newRow("NoSelection") << Q3Table::NoSelection << TRUE << 1 << 1 << 0 << 3; QTest::newRow("SingleSelection") << Q3Table::Single << TRUE << 1 << 1 << 0 << 3; QTest::newRow("MultiSelection") << Q3Table::Multi << TRUE << 1 << 1 << 0 << 3; QTest::newRow("SingleRowSelection") << Q3Table::SingleRow << TRUE << 1 << 1 << 0 << 3; QTest::newRow("MultiRowSelection") << Q3Table::MultiRow << TRUE << 1 << 1 << 0 << 3; } void tst_Q3Table::selectRow() { QFETCH(Q3Table::SelectionMode,selectionMode); QFETCH(bool,activeSelection); QFETCH(int,topRow); QFETCH(int,bottomRow); QFETCH(int,leftCol); QFETCH(int,rightCol); testWidget->clearSelection(); testWidget->setSelectionMode(selectionMode); testWidget->selectRow(1); int current = testWidget->currentSelection(); QVERIFY(current != -1); Q3TableSelection ts = testWidget->selection(current); QCOMPARE(ts.isActive(), activeSelection); if (activeSelection) { QCOMPARE(ts.topRow(), topRow); QCOMPARE(ts.bottomRow(), bottomRow); QCOMPARE(ts.leftCol(), leftCol); QCOMPARE(ts.rightCol(), rightCol); } // make sure selection is cleared testWidget->clearSelection(); current = testWidget->currentSelection(); QVERIFY(current == -1); testWidget->selectRow(1); QEXPECT_FAIL("SingleRowSelection", "This currently fails in all versions", Abort); QVERIFY(testWidget->numSelections() > 0); // selectRow in SingleRowSelection doesn't select anything (see qtable.cpp) current = testWidget->currentSelection(); QVERIFY(current != -1); ts = testWidget->selection(current); QCOMPARE(ts.isActive(), activeSelection); if (activeSelection) { QCOMPARE(ts.topRow(), topRow); QCOMPARE(ts.bottomRow(), bottomRow); QCOMPARE(ts.leftCol(), leftCol); QCOMPARE(ts.rightCol(), rightCol); } } void tst_Q3Table::selectColumn_data() { QTest::addColumn("selectionMode"); QTest::addColumn("activeSelection"); QTest::addColumn("topRow"); QTest::addColumn("bottomRow"); QTest::addColumn("leftCol"); QTest::addColumn("rightCol"); QTest::newRow("NoSelection") << Q3Table::NoSelection << TRUE << 0 << 3 << 1 << 1; QTest::newRow("SingleSelection") << Q3Table::Single << TRUE << 0 << 3 << 1 << 1; QTest::newRow("MultiSelection") << Q3Table::Multi << TRUE << 0 << 3 << 1 << 1; QTest::newRow("SingleRowSelection") << Q3Table::SingleRow << TRUE << 0 << 3 << 1 << 1; QTest::newRow("MultiRowSelection") << Q3Table::MultiRow << TRUE << 0 << 3 << 1 << 1; } void tst_Q3Table::selectColumn() { QFETCH(Q3Table::SelectionMode,selectionMode); QFETCH(bool,activeSelection); QFETCH(int,topRow); QFETCH(int,bottomRow); QFETCH(int,leftCol); QFETCH(int,rightCol); testWidget->setSelectionMode(selectionMode); testWidget->selectColumn(1); Q3TableSelection ts = testWidget->selection(testWidget->currentSelection()); QCOMPARE(ts.isActive(), activeSelection); if (activeSelection) { QCOMPARE(ts.topRow(), topRow); QCOMPARE(ts.bottomRow(), bottomRow); QCOMPARE(ts.leftCol(), leftCol); QCOMPARE(ts.rightCol(), rightCol); } testWidget->clearSelection(); ts = testWidget->selection(testWidget->currentSelection()); QVERIFY(!ts.isActive()); testWidget->selectColumn(1); ts = testWidget->selection(testWidget->currentSelection()); QCOMPARE(ts.isActive(), activeSelection); if (activeSelection) { QCOMPARE(ts.topRow(), topRow); QCOMPARE(ts.bottomRow(), bottomRow); QCOMPARE(ts.leftCol(), leftCol); QCOMPARE(ts.rightCol(), rightCol); } } void tst_Q3Table::cellNavigation() { #if 0 setupTableItems(); #endif testWidget->setCurrentCell(0, 0); // Check tab key first QCOMPARE(testWidget->currentRow(), 0); QCOMPARE(testWidget->currentColumn(), 0); QTest::keyClick(testWidget->viewport(), Qt::Key_Tab); #ifdef WAITS QTest::qWait(50); #endif QCOMPARE(testWidget->currentRow(), 0); QCOMPARE(testWidget->currentColumn(), 1); QTest::keyClick(testWidget->viewport(), Qt::Key_Tab); #ifdef WAITS QTest::qWait(50); #endif QCOMPARE(testWidget->currentRow(), 0); QCOMPARE(testWidget->currentColumn(), 2); QTest::keyClick(testWidget->viewport(), Qt::Key_Tab); #ifdef WAITS QTest::qWait(50); #endif // One more, and it should stay where it is QTest::keyClick(testWidget->viewport(), Qt::Key_Tab); QCOMPARE(testWidget->currentRow(), 0); QCOMPARE(testWidget->currentColumn(), 3); testWidget->setCurrentCell(3,3); // Now check backtab key QCOMPARE(testWidget->currentRow(), 3); QCOMPARE(testWidget->currentColumn(), 3); QTest::keyClick(testWidget->viewport(), Qt::Key_BackTab); #ifdef WAITS QTest::qWait(50); #endif QCOMPARE(testWidget->currentRow(), 3); QCOMPARE(testWidget->currentColumn(), 2); QTest::keyClick(testWidget->viewport(), Qt::Key_BackTab); #ifdef WAITS QTest::qWait(50); #endif QCOMPARE(testWidget->currentRow(), 3); QCOMPARE(testWidget->currentColumn(), 1); QTest::keyClick(testWidget->viewport(), Qt::Key_BackTab); #ifdef WAITS QTest::qWait(50); #endif // One more, and it should stay where it is QTest::keyClick(testWidget->viewport(), Qt::Key_BackTab); QCOMPARE(testWidget->currentRow(), 3); QCOMPARE(testWidget->currentColumn(), 0); #ifdef WAITS QTest::qWait(50); #endif testWidget->setCurrentCell(0, 0); // Now check enter key for (int row = 0; row < 3; ++row) { QCOMPARE(testWidget->currentRow(), row); QCOMPARE(testWidget->currentColumn(), 0); QTest::keyClick(testWidget->viewport(), Qt::Key_Enter); #ifdef WAITS QTest::qWait(50); #endif } // One more, and it should go to back QTest::keyClick(testWidget->viewport(), Qt::Key_Enter); QCOMPARE(testWidget->currentRow(), 0); QCOMPARE(testWidget->currentColumn(), 1); } void tst_Q3Table::cellNavigationWhileEditing() { // This is basically the cellNavigation() test // with the current cell being edited before // navigation. #if 0 setupTableItems(); int a, b; QPoint contentPos; // Check tab key first for (a = 0;a < 4;a++) { for (b = 0;b < 4;b++) { QCOMPARE(testWidget->currentRow(),a); QCOMPARE(testWidget->currentColumn(),b); contentPos = QPoint(testWidget->columnPos(b) + 3, testWidget->rowPos(a) + 3); QTest::mouseClick(testWidget->viewport(), Qt::LeftButton, Qt::NoButton, testWidget->contentsToViewport(contentPos)); if(a == 0 && b == 2) // On typing item QTest::keyClick(testWidget->viewport(), Qt::Key_A); QTest::keyClick(testWidget->viewport(),Qt::Key_Tab); } } // One more should put it at the beginning again QTest::keyClick(testWidget->viewport(),Qt::Key_Tab); QCOMPARE(testWidget->currentRow(),0); QCOMPARE(testWidget->currentColumn(),0); testWidget->setCurrentCell(3,3); // Now check backtab key for (a = 3;a > -1;a--) { for (b = 3;b > -1;b--) { QCOMPARE(testWidget->currentRow(),a); QCOMPARE(testWidget->currentColumn(),b); contentPos = QPoint(testWidget->columnPos(b) + 3, testWidget->rowPos(a) + 3); QTest::mouseClick(testWidget->viewport(), Qt::LeftButton, Qt::NoButton, testWidget->contentsToViewport(contentPos)); if(a == 0 && b == 2) // On typing item QTest::keyClick(testWidget->viewport(), Qt::Key_A); QTest::keyClick(testWidget->viewport(),Qt::Key_BackTab); } } // One more should put it at the end again QTest::keyClick(testWidget->viewport(),Qt::Key_BackTab); QCOMPARE(testWidget->currentRow(),3); QCOMPARE(testWidget->currentColumn(),3); testWidget->setCurrentCell(0,0); // Now check enter key for (a = 0;a < 4;a++) { for (b = 0;b < 4;b++) { QCOMPARE(testWidget->currentColumn(),a); QCOMPARE(testWidget->currentRow(),b); contentPos = QPoint(testWidget->columnPos(a) + 3, testWidget->rowPos(b) + 3); QTest::mouseClick(testWidget->viewport(), Qt::LeftButton, Qt::NoButton, testWidget->contentsToViewport(contentPos)); if(a == 0 && b == 2) // On typing item QTest::keyClick(testWidget->viewport(), Qt::Key_A); QTest::keyClick(testWidget->viewport(),Qt::Key_Enter); } } // One more should put it at the beginning again QTest::keyClick(testWidget->viewport(),Qt::Key_Enter); QCOMPARE(testWidget->currentRow(),0); QCOMPARE(testWidget->currentColumn(),0); // Reset it back to the top contentPos = QPoint(testWidget->columnPos(0) + 3, testWidget->rowPos(0) + 3); QTest::mouseClick(testWidget->viewport(), Qt::LeftButton, Qt::NoButton, testWidget->contentsToViewport(contentPos)); // Now check down key for (a = 0;a < 4;a++) { for (b = 0;b < 4;b++) { QCOMPARE(testWidget->currentRow(),a); QCOMPARE(testWidget->currentColumn(),b); contentPos = QPoint(testWidget->columnPos(b) + 3, testWidget->rowPos(a) + 3); QTest::mouseClick(testWidget->viewport(), Qt::LeftButton, Qt::NoButton, testWidget->contentsToViewport(contentPos)); if(a == 0 && b == 2) // On typing item QTest::keyClick(testWidget->viewport(), Qt::Key_A); QTest::keyClick(testWidget->viewport(),Qt::Key_Down); if (a == 3) { // Check it hasn't moved from the bottom even // after clicking down QCOMPARE(testWidget->currentRow(),a); QCOMPARE(testWidget->currentColumn(),b); // Put it in correct place for next check QTest::keyClick(testWidget->viewport(),Qt::Key_Home); QTest::keyClick(testWidget->viewport(),Qt::Key_Right); } } } // Start at the bottom now contentPos = QPoint(testWidget->columnPos(0) + 3, testWidget->rowPos(3) + 3); QTest::mouseClick(testWidget->viewport(), Qt::LeftButton, Qt::NoButton, testWidget->contentsToViewport(contentPos)); // Now check up key for (a = 3;a > -1;a--) { for (b = 3;b > -1;b--) { QCOMPARE(testWidget->currentRow(),a); QCOMPARE(testWidget->currentColumn(),b); contentPos = QPoint(testWidget->columnPos(b) + 3, testWidget->rowPos(a) + 3); QTest::mouseClick(testWidget->viewport(), Qt::LeftButton, Qt::NoButton, testWidget->contentsToViewport(contentPos)); if(a == 0 && b == 2) // On typing item QTest::keyClick(testWidget->viewport(), Qt::Key_A); QTest::keyClick(testWidget->viewport(),Qt::Key_Up); if (a == 0) { // Check it hasn't moved from the bottom even // after clicking down QCOMPARE(testWidget->currentRow(),a); QCOMPARE(testWidget->currentColumn(),b); // Put it in correct place for next check QTest::keyClick(testWidget->viewport(),Qt::Key_End); QTest::keyClick(testWidget->viewport(),Qt::Key_Right); } } } // Reset it back to the top contentPos = QPoint(testWidget->columnPos(0) + 3, testWidget->rowPos(0) + 3); QTest::mouseClick(testWidget->viewport(), Qt::LeftButton, Qt::NoButton, testWidget->contentsToViewport(contentPos)); // Now check right key for (a = 0;a < 4;a++) { for (b = 0;b < 4;b++) { QCOMPARE(testWidget->currentRow(),a); QCOMPARE(testWidget->currentColumn(),b); contentPos = QPoint(testWidget->columnPos(b) + 3, testWidget->rowPos(a) + 3); QTest::mouseClick(testWidget->viewport(), Qt::LeftButton, Qt::NoButton, testWidget->contentsToViewport(contentPos)); if(a == 0 && b == 2) // On typing item QTest::keyClick(testWidget->viewport(), Qt::Key_A); QTest::keyClick(testWidget->viewport(),Qt::Key_Right); if (b == 3) { // Check it hasn't moved from the bottom even // after clicking down QCOMPARE(testWidget->currentRow(),a); QCOMPARE(testWidget->currentColumn(),b); // Put it in correct place for next check QTest::keyClick(testWidget->viewport(),Qt::Key_Home); QTest::keyClick(testWidget->viewport(),Qt::Key_Down); } } } // Start it at the far left contentPos = QPoint(testWidget->columnPos(3) + 3, testWidget->rowPos(0) + 3); QTest::mouseClick(testWidget->viewport(), Qt::LeftButton, Qt::NoButton, testWidget->contentsToViewport(contentPos)); // Now check up key for (a = 3;a > -1;a--) { for (b = 3;b > -1;b--) { QCOMPARE(testWidget->currentRow(),a); QCOMPARE(testWidget->currentColumn(),b); contentPos = QPoint(testWidget->columnPos(b) + 3, testWidget->rowPos(a) + 3); QTest::mouseClick(testWidget->viewport(), Qt::LeftButton, Qt::NoButton, testWidget->contentsToViewport(contentPos)); if(a == 0 && b == 2) // On typing item QTest::keyClick(testWidget->viewport(), Qt::Key_A); QTest::keyClick(testWidget->viewport(),Qt::Key_Left); if (b == 0) { // Check it hasn't moved from the bottom even // after clicking down QCOMPARE(testWidget->currentRow(),a); QCOMPARE(testWidget->currentColumn(),b); // Put it in correct place for next check QTest::keyClick(testWidget->viewport(),Qt::Key_End); QTest::keyClick(testWidget->viewport(),Qt::Key_Down); } } } #else QSKIP( "This test currently fails on all versions", SkipAll); #endif } void tst_Q3Table::removeRow_data() { QTest::addColumn("selectionMode"); QTest::newRow("NoSelection") << Q3Table::NoSelection; QTest::newRow("SingleSelection") << Q3Table::Single; QTest::newRow("MultiSelection") << Q3Table::Multi; QTest::newRow("SingleRowSelection") << Q3Table::SingleRow; QTest::newRow("MultiRowSelection") << Q3Table::MultiRow; } void tst_Q3Table::removeRow() { QFETCH(Q3Table::SelectionMode, selectionMode); #if 1 if(selectionMode == Q3Table::SingleRow || selectionMode == Q3Table::MultiRow) QSKIP("removeRow() is expected to fail in SingleRow/MultiRow selection modes in all versions", SkipAll); #endif // This tests task 26419 setupTableItems(); testWidget->setSelectionMode(selectionMode); for(int a = 3;a > -1;a--) { QPoint contentPos(testWidget->columnPos(0) + 3, testWidget->rowPos(a) + 3); QTest::mouseClick(testWidget->viewport(), Qt::LeftButton, Qt::NoModifier, testWidget->contentsToViewport(contentPos)); #ifdef WAITS QTest::qWait(50); #endif if (selectionMode != Q3Table::NoSelection) { Q3TableSelection ts = testWidget->selection(testWidget->currentSelection()); QVERIFY(ts.isActive()); QVERIFY(ts.topRow() == a); QVERIFY(ts.bottomRow() == a); } testWidget->removeRow(a); // a is actually now the number of rows because the row sections are // zero-based QVERIFY(testWidget->numRows() == a); QVERIFY(!testWidget->selection(testWidget->currentSelection()).isActive()); } } class SwapRowMemoryLeakTableItem : public Q3TableItem { public: SwapRowMemoryLeakTableItem(Q3Table * table, const QString & text, bool * deletionFlag) : Q3TableItem(table, OnTyping, text) { this->deletionFlag = deletionFlag; } ~SwapRowMemoryLeakTableItem() { *deletionFlag = TRUE; } private: bool * deletionFlag; }; void tst_Q3Table::swapRowMemoryLeak() { //Although this should fail due to code in Q3Table::swapRows() it dose not becuse it is saved //in ~Q3Table Q3Table * quickTable = new Q3Table(2, 1); bool i1deletionFlag = FALSE; SwapRowMemoryLeakTableItem * i1 = new SwapRowMemoryLeakTableItem(quickTable,"item 1", &i1deletionFlag); quickTable->setItem(0, 0, i1); bool i2deletionFlag = FALSE; SwapRowMemoryLeakTableItem * i2 = new SwapRowMemoryLeakTableItem(quickTable,"item 2", &i2deletionFlag); quickTable->setItem(1, 0, i2); quickTable->swapRows(0, 1); // quickTable->removeRow(0); delete quickTable; QVERIFY(i1deletionFlag); QVERIFY(i2deletionFlag); } void tst_Q3Table::insertRows_data() { QTest::addColumn("rowToInsertAt"); QTest::addColumn("numberOfRowsToInsert"); QTest::newRow("firstRowOneRow") << 1 << 1; QTest::newRow("secondRowTenRows") << 2 << 10; QTest::newRow("thirdRowNoRows") << 3 << 0; QTest::newRow("zerothRowNegativeRows") << 0 << -1; } void tst_Q3Table::insertRows() { QFETCH(int, rowToInsertAt); QFETCH(int, numberOfRowsToInsert); int i = 0; for (i = 0;i < 4;i++) testWidget->setText(i, 0, QString("Item %0,0").arg(i)); testWidget->insertRows(rowToInsertAt, numberOfRowsToInsert); if(numberOfRowsToInsert <= 0) { QVERIFY(testWidget->numRows() == 4); } else { QVERIFY(testWidget->numRows() == 4 + numberOfRowsToInsert); } int rowNumber = 0; for (i = 0;i < rowToInsertAt;i++) { QCOMPARE(testWidget->text(i, 0), QString("Item %0,0").arg(rowNumber)); rowNumber++; } if (numberOfRowsToInsert > 0) { for (i = rowToInsertAt;i < rowToInsertAt + numberOfRowsToInsert;i++) QCOMPARE(testWidget->text(i, 0), QString()); for (i = rowToInsertAt + numberOfRowsToInsert;i < 4 + numberOfRowsToInsert;i++) { QCOMPARE(testWidget->text(i, 0), QString("Item %0,0").arg(rowNumber)); rowNumber++; } } } class EditCheckQ3Table : public Q3Table { public: int endEditCount; int beginEditCount; EditCheckQ3Table(int r, int c, QWidget *parent = 0, const char *name = 0) : Q3Table(r, c, parent, name) { endEditCount = beginEditCount = 0; } protected: void endEdit(int row, int col, bool accept, bool replace) { endEditCount++; Q3Table::endEdit(row, col, accept, replace); } QWidget * beginEdit(int row, int col, bool replace) { beginEditCount++; return Q3Table::beginEdit(row, col, replace); } }; void tst_Q3Table::editCheck() { // Test for task 28086 #if 1 QSKIP("This test currently fails on all versions", SkipAll); #endif EditCheckQ3Table table(10, 10, 0); table.show(); QApplication::setActiveWindow(&table); QTest::qWaitForWindowShown(&table); QTRY_COMPARE(QApplication::activeWindow(), static_cast(&table)); table.setCurrentCell(0, 0); #ifdef WAITS QTest::qWait(50); #endif QTest::keyClick(table.viewport(), Qt::Key_T); #ifdef WAITS QTest::qWait(50); #endif // After the first keyevent, the table starts editing the item QLineEdit *le = qFindChild(testWidget->viewport(), "qt_lineeditor"); #ifdef WAITS QTest::qWait(50); #endif QTest::keyClick(le, Qt::Key_Enter); le = 0; #ifdef WAITS QTest::qWait(50); #endif QCOMPARE(table.beginEditCount, 1); QEXPECT_FAIL("", "this fails because endEdit is called for the old current item when we set a new one", Abort); QCOMPARE(table.endEditCount, 1); } void tst_Q3Table::setCellWidgetFocus() { #define CELLWIDGET_CHEAT 1 // Test for task 27683 int numRows = testWidget->numRows(); int numCols = testWidget->numCols(); testWidget->setNumRows(1); testWidget->setNumCols(1); #if CELLWIDGET_CHEAT qApp->processEvents(); #endif QLineEdit *lineedit = new QLineEdit(testWidget); testWidget->setCellWidget(0, 0, lineedit); testWidget->show(); qApp->setActiveWindow(testWidget); lineedit->setFocus(); QVERIFY(lineedit->hasFocus()); testWidget->setNumRows(numRows); testWidget->setNumCols(numCols); } void tst_Q3Table::selectionWithMouse_data() { QTest::addColumn("clickPos"); QTest::addColumn("selectionMode"); QTest::addColumn("numSelections"); QTest::addColumn("activeSelection"); QTest::addColumn("topRow"); QTest::addColumn("bottomRow"); QTest::addColumn("leftCol"); QTest::addColumn("rightCol"); QTest::newRow("NoSelection") << QPoint(20, 15) << Q3Table::NoSelection << 0 << FALSE << -1 << -1 << -1 << -1; QTest::newRow("SingleSelection") << QPoint(20, 15) << Q3Table::Single << 1 << TRUE << 0 << 0 << 0 << 0; QTest::newRow("MultiSelection") << QPoint(20, 15) << Q3Table::Multi << 1 << TRUE << 0 << 0 << 0 << 0; QTest::newRow("SingleRowSelection") << QPoint(20, 15) << Q3Table::SingleRow << 1 << TRUE << 0 << 0 << 0 << 3; QTest::newRow("MultiRowSelection") << QPoint(20, 15) << Q3Table::MultiRow << 1 << TRUE << 0 << 0 << 0 << 3; } void tst_Q3Table::selectionWithMouse() { QFETCH(QPoint, clickPos); QFETCH(Q3Table::SelectionMode, selectionMode); QFETCH(int, numSelections); QFETCH(bool, activeSelection); QFETCH(int, topRow); QFETCH(int, bottomRow); QFETCH(int, leftCol); QFETCH(int, rightCol); testWidget->setSelectionMode((Q3Table::SelectionMode)selectionMode); #ifdef WAITS QTest::qWait(50); #endif QTest::mouseClick(testWidget->viewport(), Qt::LeftButton, Qt::NoModifier, clickPos); #ifdef WAITS QTest::qWait(50); #endif QVERIFY(testWidget->numSelections() == numSelections); Q3TableSelection ts = testWidget->selection(testWidget->currentSelection()); QVERIFY(ts.isActive() == activeSelection); if (activeSelection) { QVERIFY(ts.topRow() == topRow); QVERIFY(ts.bottomRow() == bottomRow); QVERIFY(ts.leftCol() == leftCol); QVERIFY(ts.rightCol() == rightCol); } } class TimeTableItem : public Q3TableItem { public: TimeTableItem(Q3Table *parent=0) : Q3TableItem(parent, Q3TableItem::OnTyping, ""), editorWasTimeEdit(false) { setReplaceable(false); } QWidget* createEditor() const { return new Q3TimeEdit(table()->viewport(), "time_edit"); } void setContentFromEditor(QWidget* widget) { Q3TimeEdit *time_edit = ::qobject_cast(widget); if (!time_edit) { editorWasTimeEdit = false; Q3TableItem::setContentFromEditor(widget); return; } editorWasTimeEdit = true; QTime res = time_edit->time(); setText(QString::number(QTime().secsTo(res))); } bool editorWasTimeEdit; }; void tst_Q3Table::onValueChanged(int, int) { isValueChanged = true; } void tst_Q3Table::valueChanged() { // task 27496 isValueChanged = false; TimeTableItem *ti = new TimeTableItem(testWidget); testWidget->setItem(0, 0, ti); connect(testWidget,SIGNAL(valueChanged(int,int)),this,SLOT(onValueChanged(int,int))); testWidget->show(); QApplication::setActiveWindow(testWidget); QTest::qWaitForWindowShown(testWidget); QTRY_COMPARE(QApplication::activeWindow(), static_cast(testWidget)); #ifdef WAITS QTest::qWait(50); #endif QTest::keyClick(testWidget->viewport(), Qt::Key_1); #ifdef WAITS QTest::qWait(50); #endif QTRY_VERIFY(qApp->focusWidget()); QTest::keyClick(qApp->focusWidget(), Qt::Key_Enter); #ifdef WAITS QTest::qWait(50); #endif QVERIFY(ti->editorWasTimeEdit); disconnect(testWidget,SIGNAL(valueChanged(int,int)),this,SLOT(onValueChanged(int,int))); } void tst_Q3Table::numSelections() { // task 28017 int numRows = testWidget->numRows(); int numCols = testWidget->numCols(); testWidget->setNumRows(10); testWidget->setNumCols(10); for (int i=0;i<10;++i) for (int j=0;j<10;++j) testWidget->setItem(i,j,new Q3TableItem(testWidget,Q3TableItem::OnTyping,"Item")); QCOMPARE(testWidget->numSelections(),0); testWidget->clearSelection(); QCOMPARE(testWidget->numSelections(),0); testWidget->selectRow(2); QCOMPARE(testWidget->numSelections(),1); testWidget->selectRow(4); QCOMPARE(testWidget->numSelections(),2); testWidget->selectRow(5); QCOMPARE(testWidget->numSelections(),3); testWidget->clearSelection(); QCOMPARE(testWidget->numSelections(),0); testWidget->setNumRows(numRows); testWidget->setNumCols(numCols); } void tst_Q3Table::dateTimeEdit() { // task 29002 TimeTableItem *ti = new TimeTableItem(testWidget); testWidget->setItem(0, 0, ti); testWidget->show(); QApplication::setActiveWindow(testWidget); QTest::qWaitForWindowShown(testWidget); QTRY_COMPARE(QApplication::activeWindow(), static_cast(testWidget)); #ifdef WAITS QTest::qWait(50); #endif QTest::keyClick(testWidget->viewport(), Qt::Key_1); #ifdef WAITS QTest::qWait(50); #endif QTRY_VERIFY(qApp->focusWidget()); QTest::keyClick(qApp->focusWidget(), Qt::Key_Enter); #ifdef WAITS QTest::qWait(50); #endif QVERIFY(ti->editorWasTimeEdit); } void tst_Q3Table::moreNumSelections_data() { QTest::addColumn("selectionMode"); QTest::addColumn("numSelectionsBeforeAnyRowClicked"); QTest::addColumn("numSelectionsAfter1stRowClicked"); QTest::addColumn("numSelectionsAfter3rdRowClicked"); QTest::addColumn("numSelectionsAfter3rdRowClickedAgain"); QTest::newRow("NoSelection") << Q3Table::NoSelection << 0 << 0 << 0 << 0; QTest::newRow("SingleSelection") << Q3Table::Single << 0 << 1 << 1 << 1; QTest::newRow("MultiSelection") << Q3Table::Multi << 0 << 1 << 2 << 2; // in row selection modes the current item is always selected QTest::newRow("SingleRowSelection") << Q3Table::SingleRow << 1 << 1 << 1 << 1; QTest::newRow("MultiRowSelection") << Q3Table::MultiRow << 1 << 1 << 2 << 2; } void tst_Q3Table::moreNumSelections() { #if 0 QFETCH(Q3Table::SelectionMode, selectionMode); QFETCH(int, numSelectionsBeforeAnyRowClicked); QFETCH(int, numSelectionsAfter1stRowClicked); QFETCH(int, numSelectionsAfter3rdRowClicked); QFETCH(int, numSelectionsAfter3rdRowClickedAgain); if((Q3Table::SelectionMode)selectionMode == Q3Table::Multi || (Q3Table::SelectionMode)selectionMode == Q3Table::MultiRow) { QSKIP("numSelections() currently fails on all versions", SkipAll); } testWidget->setSelectionMode((Q3Table::SelectionMode)selectionMode); QCOMPARE(testWidget->numSelections(), numSelectionsBeforeAnyRowClicked); #ifdef WAITS QTest::qWait(50); #endif QTest::mouseClick(testWidget->verticalHeader(), QtTestCase::LeftButton, QtTestCase::NoButton, QPoint(5, testWidget->verticalHeader()->sectionPos(0)+2)); #ifdef WAITS QTest::qWait(50); #endif QCOMPARE(testWidget->numSelections(), numSelectionsAfter1stRowClicked); QTest::mouseClick(testWidget->verticalHeader(), QtTestCase::LeftButton, QtTestCase::NoButton, QPoint(5, testWidget->verticalHeader()->sectionPos(2)+2)); #ifdef WAITS QTest::qWait(50); #endif QEXPECT_FAIL("MultiSelection", "Will not fix this for 3.x", Abort); QEXPECT_FAIL("MultiRowSelection", "Will not fix this for 3.x", Abort); QCOMPARE(testWidget->numSelections(), numSelectionsAfter3rdRowClicked); QTest::mouseClick(testWidget->verticalHeader(), QtTestCase::LeftButton, QtTestCase::NoButton, QPoint(5, testWidget->verticalHeader()->sectionPos(2)+2)); #ifdef WAITS QTest::qWait(50); #endif QCOMPARE(testWidget->numSelections(), numSelectionsAfter3rdRowClickedAgain); #else QSKIP( "This test is expected to fail on >= 3.2", SkipAll); #endif } void tst_Q3Table::headerSwapIconset() { #if 0 QIconSet is0, is1; QString hl0, hl1; if (testWidget->horizontalHeader()->iconSet(0)) is0 = *testWidget->horizontalHeader()->iconSet(0); hl0 = testWidget->horizontalHeader()->label(0); if (testWidget->horizontalHeader()->iconSet(1)) is1 = *testWidget->horizontalHeader()->iconSet(1); hl1 = testWidget->horizontalHeader()->label(1); testWidget->show(); testWidget->horizontalHeader()->setLabel(1, QPixmap(fileopen), "Test"); testWidget->swapColumns(0, 1, true); QVERIFY(!testWidget->horizontalHeader()->iconSet(1) || testWidget->horizontalHeader()->iconSet(1)->isNull()); testWidget->horizontalHeader()->setLabel(0, is0, hl0); testWidget->horizontalHeader()->setLabel(1, is1, hl1); #else QSKIP( "This test fails in Qt 4", SkipAll); #endif } class EscapeKeyDialog : public QDialog { public: EscapeKeyDialog() : QDialog(0), recievedEscape(false) {} bool recievedEscape; protected: void keyPressEvent(QKeyEvent *e) { if (e->key() == Qt::Key_Escape) recievedEscape = TRUE; QDialog::keyPressEvent(e); } }; void tst_Q3Table::propagateEscapeKey() { #if 0 EscapeKeyDialog ekd; Q3Table *table = new Q3Table(5, 5, &ekd); ekd.show(); #ifdef Q_WS_X11 qt_x11_wait_for_window_manager(&ekd); #endif table->setCurrentCell(0,0); #ifdef WAITS QTest::qWait(50); #endif QTest::keyClick(table->viewport(), Qt::Key_A); #ifdef WAITS QTest::qWait(50); #endif QTest::keyClick(table->viewport(), Qt::Key_Escape); #ifdef WAITS QTest::qWait(50); #endif QVERIFY(!ekd.recievedEscape); QVERIFY(table->text(0,0).isEmpty()); QTest::keyClick(table->viewport(), Qt::Key_Escape); #ifdef WAITS QTest::qWait(50); #endif QVERIFY(ekd.recievedEscape); #else QSKIP("This test fails for all versions of Qt", SkipAll); #endif } void tst_Q3Table::removeSelection_selectionChanged() { int numRows = testWidget->numRows(); int numCols = testWidget->numCols(); testWidget->setNumRows(3); testWidget->setNumCols(3); Q3TableSelection sel(1, 1, 2, 2); testWidget->addSelection(sel); QObject::connect(testWidget, SIGNAL(selectionChanged()), this, SLOT(selectionWasChanged())); receivedSelectionChanged = false; testWidget->removeSelection(sel); qApp->processEvents(); QVERIFY(receivedSelectionChanged); testWidget->setNumRows(numRows); testWidget->setNumCols(numCols); QObject::disconnect(testWidget, SIGNAL(selectionChanged()), this, SLOT(selectionWasChanged())); } void tst_Q3Table::selectionWasChanged() { receivedSelectionChanged = true; } QTEST_MAIN(tst_Q3Table) #include "tst_q3table.moc"