/**************************************************************************** ** ** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies). ** All rights reserved. ** Contact: Nokia Corporation (qt-info@nokia.com) ** ** This file is part of the test suite of the Qt Toolkit. ** ** $QT_BEGIN_LICENSE:LGPL$ ** No Commercial Usage ** This file contains pre-release code and may not be distributed. ** You may use this file in accordance with the terms and conditions ** contained in the Technology Preview License Agreement accompanying ** this package. ** ** GNU Lesser General Public License Usage ** Alternatively, this file may be used under the terms of the GNU Lesser ** General Public License version 2.1 as published by the Free Software ** Foundation and appearing in the file LICENSE.LGPL included in the ** packaging of this file. Please review the following information to ** ensure the GNU Lesser General Public License version 2.1 requirements ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. ** ** In addition, as a special exception, Nokia gives you certain additional ** rights. These rights are described in the Nokia Qt LGPL Exception ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package. ** ** If you have questions regarding the use of this file, please contact ** Nokia at qt-info@nokia.com. ** ** ** ** ** ** ** ** ** $QT_END_LICENSE$ ** ****************************************************************************/ #include #include #include #include #include #include #include #include // defined to be 120 by the wheel mouse vendors according to the docs #define WHEEL_DELTA 120 class Slider : public QAbstractSlider { public: using QAbstractSlider::setRepeatAction; using QAbstractSlider::repeatAction; }; class tst_QAbstractSlider: public QObject { Q_OBJECT public slots: void initTestCase(); void cleanupTestCase(); void actionTriggered(int action); void rangeChanged(int min, int max); void valueChanged(int value); void sliderMoved(int value); private slots: void triggerAction_data(); void triggerAction(); void minimum_maximum_data(); void minimum_maximum(); void keyPressed_data(); void keyPressed(); void wheelEvent_data(); void wheelEvent(); void sliderPressedReleased_data(); void sliderPressedReleased(); void setOrientation(); void sliderMoved_data(); void sliderMoved(); void rangeChanged_data(); void rangeChanged(); void setSliderPosition_data(); void setSliderPosition(); void setValue_data(); void setValue(); void setRepeatAction(); private: void waitUntilTimeElapsed(const QTime& t, int ms); Slider *slider; int previousAction; int reportedMinimum; int reportedMaximum; int reportedValue; int reportedSliderPosition; qint64 timeStamp; qint64 actionTriggeredTimeStamp; qint64 valueChangedTimeStamp; qint64 rangeChangedTimeStamp; qint64 sliderMovedTimeStamp; }; Q_DECLARE_METATYPE(QList) Q_DECLARE_METATYPE(QPoint) void tst_QAbstractSlider::initTestCase() { slider = new Slider; slider->setObjectName("testWidget"); slider->resize(100,100); slider->show(); previousAction = QAbstractSlider::SliderNoAction; timeStamp = 0; connect(slider,SIGNAL(actionTriggered(int)),this,SLOT(actionTriggered(int))); connect(slider,SIGNAL(rangeChanged(int,int)),this,SLOT(rangeChanged(int,int))); connect(slider,SIGNAL(valueChanged(int)),this,SLOT(valueChanged(int))); connect(slider,SIGNAL(sliderMoved(int)),this,SLOT(sliderMoved(int))); } void tst_QAbstractSlider::cleanupTestCase() { delete slider; } void tst_QAbstractSlider::actionTriggered(int action) { previousAction = action; actionTriggeredTimeStamp = timeStamp++; } void tst_QAbstractSlider::rangeChanged(int min,int max) { reportedMinimum = min; reportedMaximum = max; rangeChangedTimeStamp = timeStamp++; } void tst_QAbstractSlider::valueChanged(int value) { reportedValue = value; valueChangedTimeStamp = timeStamp++; } void tst_QAbstractSlider::sliderMoved(int value) { reportedSliderPosition = value; sliderMovedTimeStamp = timeStamp++; } void tst_QAbstractSlider::triggerAction_data() { QTest::addColumn("sliderAction"); QTest::addColumn("maximum"); QTest::addColumn("minimum"); QTest::addColumn("initialSliderPosition"); QTest::addColumn("singleStep"); QTest::addColumn("pageStep"); QTest::addColumn("expectedSliderPosition"); QTest::newRow("No action") << int(QAbstractSlider::SliderNoAction) // sliderAction << 1000 // max << 900 // min << 987 // initial position << 237 // single step size << 234 // page step size << 987; // expected position after QTest::newRow("Move action") << int(QAbstractSlider::SliderMove) // sliderAction << 1000 // max << 900 // min << 988 // initial position << 237 // single step size << 234 // page step size << 988; // expected position after QTest::newRow("Empty step add") << int(QAbstractSlider::SliderSingleStepAdd) // sliderAction << 1000 // max << 900 // min << 988 // initial position << 0 // single step size << 234 // page step size << 988; // expected position after QTest::newRow("Empty step sub") << int(QAbstractSlider::SliderSingleStepSub) // sliderAction << 1000 // max << 900 // min << 987 // initial position << 0 // single step size << 234 // page step size << 987; // expected position after QTest::newRow("Empty page add") << int(QAbstractSlider::SliderPageStepAdd) // sliderAction << 1000 // max << 900 // min << 988 // initial position << 234 // single step size << 0 // page step size << 988; // expected position after QTest::newRow("Empty page sub") << int(QAbstractSlider::SliderPageStepSub) // sliderAction << 1000 // max << 900 // min << 987 // initial position << 234 // single step size << 0 // page step size << 987; // expected position after QTest::newRow("Legal step add") << int(QAbstractSlider::SliderSingleStepAdd) // sliderAction << 1000 // max << 900 // min << 988 // initial position << 5 // single step size << 234 // page step size << 993; // expected position after QTest::newRow("Legal step sub") << int(QAbstractSlider::SliderSingleStepSub) // sliderAction << 1000 // max << 900 // min << 987 // initial position << 5 // single step size << 234 // page step size << 982; // expected position after QTest::newRow("Legal page add") << int(QAbstractSlider::SliderPageStepAdd) // sliderAction << 1000 // max << 900 // min << 988 // initial position << 234 // single step size << 5 // page step size << 993; // expected position after QTest::newRow("Legal page sub") << int(QAbstractSlider::SliderPageStepSub) // sliderAction << 1000 // max << 900 // min << 987 // initial position << 234 // single step size << 5 // page step size << 982; // expected position after QTest::newRow("Illegal step add") << int(QAbstractSlider::SliderSingleStepAdd) // sliderAction << 1000 // max << 900 // min << 988 // initial position << 500 // single step size << 234 // page step size << 1000; // expected position after QTest::newRow("Illegal step sub") << int(QAbstractSlider::SliderSingleStepSub) // sliderAction << 1000 // max << 900 // min << 987 // initial position << 500 // single step size << 234 // page step size << 900; // expected position after QTest::newRow("Illegal page add") << int(QAbstractSlider::SliderPageStepAdd) // sliderAction << 1000 // max << 900 // min << 988 // initial position << 234 // single step size << 500 // page step size << 1000; // expected position after QTest::newRow("Illegal page sub") << int(QAbstractSlider::SliderPageStepSub) // sliderAction << 1000 // max << 900 // min << 987 // initial position << 234 // single step size << 500 // page step size << 900; // expected position after // Negative steps will also be abs()'d so, check that case. QTest::newRow("Negative step add") << int(QAbstractSlider::SliderSingleStepAdd) // sliderAction << 1000 // max << 900 // min << 988 // initial position << -1 // single step size << 234 // page step size << 989; // expected position after QTest::newRow("Negative step sub") << int(QAbstractSlider::SliderSingleStepSub) // sliderAction << 1000 // max << 900 // min << 987 // initial position << -1 // single step size << 234 // page step size << 986; // expected position after QTest::newRow("Negative page add") << int(QAbstractSlider::SliderPageStepAdd) // sliderAction << 1000 // max << 900 // min << 988 // initial position << 234 // single step size << -1 // page step size << 989; // expected position after QTest::newRow("Negative page sub") << int(QAbstractSlider::SliderPageStepSub) // sliderAction << 1000 // max << 900 // min << 987 // initial position << 234 // single step size << -1 // page step size << 986; // expected position after QTest::newRow("Illegal negative step add") << int(QAbstractSlider::SliderSingleStepAdd) // sliderAction << 1000 // max << 900 // min << 988 // initial position << -500 // single step size << 234 // page step size << 1000; // expected position after QTest::newRow("Illegal negative step sub") << int(QAbstractSlider::SliderSingleStepSub) // sliderAction << 1000 // max << 900 // min << 988 // initial position << -500 // single step size << 234 // page step size << 900; // expected position after QTest::newRow("Illegal negative page add") << int(QAbstractSlider::SliderPageStepAdd) // sliderAction << 1000 // max << 900 // min << 988 // initial position << 234 // single step size << -500 // page step size << 1000; // expected position after QTest::newRow("Illegal negative page sub") << int(QAbstractSlider::SliderPageStepSub) // sliderAction << 1000 // max << 900 // min << 988 // initial position << 245 // single step size << -500 // page step size << 900; // expected position after QTest::newRow("Slider to minimum") << int(QAbstractSlider::SliderToMinimum) // sliderAction << 1000 // max << 900 // min << 988 // initial position << 245 // single step size << 1 // page step size << 900; // expected position after QTest::newRow("Slider to maximum") << int(QAbstractSlider::SliderToMaximum) // sliderAction << 1000 // max << 900 // min << 988 // initial position << 245 // single step size << 1 // page step size << 1000; // expected position after } void tst_QAbstractSlider::triggerAction() { QFETCH(int,sliderAction); QFETCH(int,maximum); QFETCH(int,minimum); QFETCH(int,initialSliderPosition); QFETCH(int,singleStep); QFETCH(int,pageStep); QFETCH(int,expectedSliderPosition); slider->setTracking(true); slider->setRange(minimum,maximum); slider->setSingleStep(singleStep); slider->setPageStep(pageStep); QCOMPARE(slider->singleStep(), qAbs(singleStep)); QCOMPARE(slider->pageStep(), qAbs(pageStep)); int oldPosition = slider->sliderPosition(); slider->setSliderPosition(initialSliderPosition); QVERIFY( (oldPosition == initialSliderPosition && previousAction == int(QAbstractSlider::SliderNoAction)) || (oldPosition != initialSliderPosition && previousAction == int(QAbstractSlider::SliderMove))); previousAction = int(QAbstractSlider::SliderNoAction); QAbstractSlider::SliderAction *action = reinterpret_cast(&sliderAction); QVERIFY(action != 0); slider->triggerAction(*action); QCOMPARE(previousAction,sliderAction); // previousAction set in the actionTriggered() slot QCOMPARE(slider->sliderPosition(),expectedSliderPosition); QCOMPARE(slider->value(),expectedSliderPosition); QCOMPARE(reportedValue,expectedSliderPosition); previousAction = int(QAbstractSlider::SliderNoAction); if (initialSliderPosition != expectedSliderPosition) QVERIFY(actionTriggeredTimeStamp < valueChangedTimeStamp); } void tst_QAbstractSlider::minimum_maximum_data() { QTest::addColumn("minimum"); QTest::addColumn("maximum"); QTest::addColumn("expectedMinimum"); QTest::addColumn("expectedMaximum"); QTest::newRow("Normal range") << 100 << 200 << 100 << 200; QTest::newRow("Minimum higher") << 100 << 0 << 100 << 100; QTest::newRow("Negative minimum") << -100 << 100 << -100 << 100; QTest::newRow("Negative range") << -100 << -50 << -100 << -50; } void tst_QAbstractSlider::minimum_maximum() { QFETCH(int, minimum); QFETCH(int, maximum); QFETCH(int, expectedMinimum); QFETCH(int, expectedMaximum); slider->setRange(minimum,maximum); QCOMPARE(slider->minimum(),expectedMinimum); QCOMPARE(slider->maximum(),expectedMaximum); QCOMPARE(reportedMinimum,expectedMinimum); QCOMPARE(reportedMaximum,expectedMaximum); slider->setRange(minimum,maximum); slider->setMaximum(slider->minimum() - 1); QCOMPARE(slider->maximum(),slider->minimum()); QCOMPARE(reportedMinimum,slider->minimum()); QCOMPARE(reportedMaximum,slider->maximum()); slider->setRange(minimum,maximum); slider->setMinimum(slider->maximum() + 1); QCOMPARE(slider->minimum(),slider->maximum()); QCOMPARE(reportedMinimum,slider->minimum()); QCOMPARE(reportedMaximum,slider->maximum()); slider->setRange(minimum,maximum); slider->setSliderPosition(slider->maximum() + 1); QCOMPARE(slider->sliderPosition(), slider->maximum()); QCOMPARE(slider->value(), slider->maximum()); QCOMPARE(reportedValue, slider->maximum()); slider->setRange(minimum,maximum); slider->setSliderPosition(slider->minimum() - 1); QCOMPARE(slider->sliderPosition(), slider->minimum()); QCOMPARE(slider->value(), slider->minimum()); QCOMPARE(reportedValue, slider->minimum()); slider->setRange(minimum,maximum); int oldPosition = slider->sliderPosition(); slider->setMaximum(oldPosition - 1); QCOMPARE(slider->sliderPosition(),oldPosition - 1); slider->setRange(minimum,maximum); oldPosition = slider->sliderPosition(); slider->setMinimum(oldPosition + 1); QCOMPARE(slider->sliderPosition(), oldPosition + 1); } void tst_QAbstractSlider::keyPressed_data() { QTest::addColumn("initialSliderPosition"); QTest::addColumn("minimum"); QTest::addColumn("maximum"); QTest::addColumn("stepSize"); QTest::addColumn("pageSize"); QTest::addColumn >("keySequence"); QTest::addColumn("expectedSliderPositionHorizontal"); QTest::addColumn("expectedSliderPositionVertical"); QTest::addColumn("expectedSliderPositionHorizontalInverted"); // :) QTest::addColumn("expectedSliderPositionVerticalInverted"); QList list; list << Qt::Key_Down; QTest::newRow("Step down once") << 10 // initial position << 0 // minimum << 100 // maximum << 3 // single step size << 0 // page step size << list // key sequence << 7 // result in case of horizontal slider << 7 // result in case of vertical slider << 13 // result in case of inverted horiz. slider << 13; // result in case of inverted vertical slider list = QList(); list << Qt::Key_Up; QTest::newRow("Step down once") << 10 // initial position << 0 // minimum << 100 // maximum << 3 // single step size << 0 // page step size << list // key sequence << 13 // result in case of horizontal slider << 13 // result in case of vertical slider << 7 // result in case of inverted horiz. slider << 7; // result in case of inverted vertical slider list = QList(); list << Qt::Key_Left; QTest::newRow("Step left once") << 10 // initial position << 0 // minimum << 100 // maximum << 3 // single step size << 0 // page step size << list // key sequence << 7 // result in case of horizontal slider << 7 // result in case of vertical slider << 13 // result in case of inverted horiz. slider << 13; // result in case of inverted vertical slider list = QList(); list << Qt::Key_Right; QTest::newRow("Step right once") << 10 // initial position << 0 // minimum << 100 // maximum << 3 // single step size << 0 // page step size << list // key sequence << 13 // result in case of horizontal slider << 13 // result in case of vertical slider << 7 // result in case of inverted horiz. slider << 7; // result in case of inverted vertical slider list = QList(); list << Qt::Key_PageDown; QTest::newRow("Page down once") << 10 // initial position << 0 // minimum << 100 // maximum << 0 // single step size << 3 // page step size << list // key sequence << 7 // result in case of horizontal slider << 7 // result in case of vertical slider << 13 // result in case of inverted horiz. slider << 13; // result in case of inverted vertical slider list = QList(); list << Qt::Key_PageUp; QTest::newRow("Page up once") << 10 // initial position << 0 // minimum << 100 // maximum << 0 // single step size << 3 // page step size << list // key sequence << 13 // result in case of horizontal slider << 13 // result in case of vertical slider << 7 // result in case of inverted horiz. slider << 7; // result in case of inverted vertical slider list = QList(); list << Qt::Key_Up << Qt::Key_Up << Qt::Key_PageDown << Qt::Key_PageDown << Qt::Key_Left << Qt::Key_Left << Qt::Key_Right << Qt::Key_Down << Qt::Key_PageUp << Qt::Key_PageUp << Qt::Key_Down << Qt::Key_Right; QTest::newRow("Symmetric seq") << 50 // initial position << 0 // minimum << 100 // maximum << 3 // single step size << 3 // page step size << list // key sequence << 50 // result in case of horizontal slider << 50 // result in case of vertical slider << 50 // result in case of inverted horiz. slider << 50; // result in case of inverted vertical slider list = QList(); list << Qt::Key_Home; QTest::newRow("Home") << 10 // initial position << 0 // minimum << 100 // maximum << 0 // single step size << 3 // page step size << list // key sequence << 0 // result in case of horizontal slider << 0 // result in case of vertical slider << 0 // result in case of inverted horiz. slider << 0; // result in case of inverted vertical slider list = QList(); list << Qt::Key_End; QTest::newRow("End") << 10 // initial position << 0 // minimum << 100 // maximum << 0 // single step size << 3 // page step size << list // key sequence << 100 // result in case of horizontal slider << 100 // result in case of vertical slider << 100 // result in case of inverted horiz. slider << 100; // result in case of inverted vertical slider list = QList(); list << Qt::Key_End << Qt::Key_Up; QTest::newRow("Past end")<< 10 // initial position << 0 // minimum << 100 // maximum << 3 // single step size << 3 // page step size << list // key sequence << 100 // result in case of horizontal slider << 100 // result in case of vertical slider << 97 // result in case of inverted horiz. slider << 97; // result in case of inverted vertical slider list = QList(); list << Qt::Key_Home << Qt::Key_Down; QTest::newRow("Past home")<< 10 // initial position << 0 // minimum << 100 // maximum << 3 // single step size << 3 // page step size << list // key sequence << 0 // result in case of horizontal slider << 0 // result in case of vertical slider << 3 // result in case of inverted horiz. slider << 3; // result in case of inverted vertical slider } void tst_QAbstractSlider::keyPressed() { QFETCH(int, initialSliderPosition); QFETCH(int, minimum); QFETCH(int, maximum); QFETCH(int, stepSize); QFETCH(int, pageSize); QFETCH(QList, keySequence); QFETCH(int, expectedSliderPositionHorizontal); QFETCH(int, expectedSliderPositionVertical); QFETCH(int, expectedSliderPositionHorizontalInverted); QFETCH(int, expectedSliderPositionVerticalInverted); // Horizontal non-inverted slider->setRange(minimum,maximum); slider->setSliderPosition(initialSliderPosition); slider->setSingleStep(stepSize); slider->setPageStep(pageSize); slider->setOrientation(Qt::Horizontal); slider->setInvertedAppearance(false); slider->setInvertedControls(false); for (int i=0;isliderPosition(), expectedSliderPositionHorizontal); // Horizontal inverted slider->setRange(minimum,maximum); slider->setSliderPosition(initialSliderPosition); slider->setSingleStep(stepSize); slider->setPageStep(pageSize); slider->setOrientation(Qt::Horizontal); slider->setInvertedAppearance(true); slider->setInvertedControls(true); for (int i=0;isliderPosition(), expectedSliderPositionHorizontalInverted); // Vertical non-inverted slider->setRange(minimum,maximum); slider->setSliderPosition(initialSliderPosition); slider->setSingleStep(stepSize); slider->setPageStep(pageSize); slider->setOrientation(Qt::Vertical); slider->setInvertedAppearance(false); slider->setInvertedControls(false); for (int i=0;isliderPosition(), expectedSliderPositionVertical); // Vertical inverted slider->setRange(minimum,maximum); slider->setSliderPosition(initialSliderPosition); slider->setSingleStep(stepSize); slider->setPageStep(pageSize); slider->setOrientation(Qt::Vertical); slider->setInvertedAppearance(true); slider->setInvertedControls(true); for (int i=0;isliderPosition(), expectedSliderPositionVerticalInverted); } void tst_QAbstractSlider::wheelEvent_data() { QTest::addColumn("initialSliderPosition"); QTest::addColumn("minimum"); QTest::addColumn("maximum"); QTest::addColumn("singleStep"); QTest::addColumn("pageStep"); QTest::addColumn("invertedControls"); QTest::addColumn("wheelScrollLines"); QTest::addColumn("withModifiers"); // use keyboard modifiers while scrolling? (CTRL and SHIFT) QTest::addColumn("deltaMultiple"); // multiples of WHEEL_DELTA QTest::addColumn("sliderOrientation"); QTest::addColumn("wheelOrientation"); QTest::addColumn("expectedSliderPosition"); QTest::addColumn("distanceFromBottomRight"); // mpointer's distance from bottom-right corner of widget QTest::newRow("Normal data step") << 0 // initial position << 0 // minimum << 100 // maximum << 1 // single step << 100 // page step << false // inverted controls << 20 // wheel scroll lines << false // with modifiers << 1 // delta << int(Qt::Vertical) // orientation of slider << int(Qt::Vertical) // orientation of wheel << 20 // expected position after << QPoint(0,0); QTest::newRow("Normal data page") << 0 // initial position << 0 // minimum << 100 // maximum << 100 // single step << 1 // page step << false // inverted controls << 20 // wheel scroll lines << false // with modifiers << 1 // delta << int(Qt::Vertical) // orientation of slider << int(Qt::Vertical) // orientation of wheel << 1 // expected position after << QPoint(1,1); QTest::newRow("Different orientation") << 0 // initial position << 0 // minimum << 100 // maximum << 100 // single step << 1 // page step << false // inverted controls << 20 // wheel scroll lines << false // with modifiers << 1 // delta << int(Qt::Horizontal) // orientation of slider << int(Qt::Vertical) // orientation of wheel << 1 // expected position after << QPoint(1,1); QTest::newRow("Different orientation2")<< 0 // initial position << 0 // minimum << 100 // maximum << 100 // single step << 1 // page step << false // inverted controls << 20 // wheel scroll lines << false // with modifiers << 1 // delta << int(Qt::Horizontal) // orientation of slider << int(Qt::Vertical) // orientation of wheel << 1 // expected position after << QPoint(0,0); QTest::newRow("Inverted controls") << 50 // initial position << 0 // minimum << 100 // maximum << 1 // single step << 100 // page step << true // inverted controls << 20 // wheel scroll lines << false // with modifiers << 1 // delta << int(Qt::Horizontal) // orientation of slider << int(Qt::Horizontal) // orientation of wheel << 30 // expected position after << QPoint(1,1); QTest::newRow("Past end") << 50 // initial position << 0 // minimum << 100 // maximum << 26 // single step << 100 // page step << false // inverted controls << 1 // wheel scroll lines << false // with modifiers << 2 // delta << int(Qt::Horizontal) // orientation of slider << int(Qt::Horizontal) // orientation of wheel << 100 // expected position after << QPoint(0,0); QTest::newRow("Past start") << 50 // initial position << 0 // minimum << 100 // maximum << 26 // single step << 100 // page step << false // inverted controls << 1 // wheel scroll lines << false // with modifiers << -2 // delta << int(Qt::Horizontal) // orientation of slider << int(Qt::Horizontal) // orientation of wheel << 0 // expected position after << QPoint(0,0); QTest::newRow("With modifiers") << 50 // initial position << 0 // minimum << 100 // maximum << 1 // single step << 40 // page step << false // inverted controls << 20 // wheel scroll lines << true // with modifiers << 1 // delta << int(Qt::Horizontal) // orientation of slider << int(Qt::Horizontal) // orientation of wheel << 90 // expected position after << QPoint(0,0); } void tst_QAbstractSlider::wheelEvent() { QFETCH(int,initialSliderPosition); QFETCH(int,minimum); QFETCH(int,maximum); QFETCH(int,singleStep); QFETCH(int,pageStep); QFETCH(bool,invertedControls); QFETCH(int,wheelScrollLines); QFETCH(bool,withModifiers); QFETCH(int,deltaMultiple); QFETCH(int,sliderOrientation); QFETCH(int,wheelOrientation); QFETCH(int,expectedSliderPosition); QFETCH(QPoint,distanceFromBottomRight); QCoreApplication *applicationInstance = QCoreApplication::instance(); QVERIFY(applicationInstance != 0); QApplication::setWheelScrollLines(wheelScrollLines); Qt::Orientation orientation = *reinterpret_cast(&sliderOrientation); slider->setRange(minimum,maximum); slider->setSliderPosition(initialSliderPosition); slider->setSingleStep(singleStep); slider->setPageStep(pageStep); slider->setInvertedControls(invertedControls); slider->setOrientation(orientation); Qt::KeyboardModifier k = withModifiers ? Qt::ControlModifier : Qt::NoModifier; orientation = *reinterpret_cast(&wheelOrientation); QWheelEvent event(slider->rect().bottomRight() + distanceFromBottomRight, WHEEL_DELTA * deltaMultiple, Qt::NoButton, k, orientation); QVERIFY(applicationInstance->sendEvent(slider,&event)); QCOMPARE(slider->sliderPosition(),expectedSliderPosition); slider->setSliderPosition(initialSliderPosition); k = withModifiers ? Qt::ShiftModifier : Qt::NoModifier; event = QWheelEvent(slider->rect().bottomRight() + distanceFromBottomRight, WHEEL_DELTA * deltaMultiple, Qt::NoButton, k, orientation); QSignalSpy spy1(slider, SIGNAL(actionTriggered(int))); QSignalSpy spy2(slider, SIGNAL(valueChanged(int))); QVERIFY(applicationInstance->sendEvent(slider,&event)); QCOMPARE(slider->sliderPosition(),expectedSliderPosition); int expectedSignalCount = (initialSliderPosition == expectedSliderPosition) ? 0 : 1; QCOMPARE(spy1.count(), expectedSignalCount); QCOMPARE(spy2.count(), expectedSignalCount); if (expectedSignalCount) QVERIFY(actionTriggeredTimeStamp < valueChangedTimeStamp); } void tst_QAbstractSlider::sliderPressedReleased_data() { QTest::addColumn("control"); QTest::addColumn("minimum"); QTest::addColumn("maximum"); QTest::addColumn("subControl"); QTest::addColumn("expectedCount"); QTest::newRow("slider on the handle") << int(QStyle::CC_Slider) << 0 << 20 << uint(QStyle::SC_SliderHandle) << 1; QTest::newRow("slider on the groove") << int(QStyle::CC_Slider) << 0 << 20 << uint(QStyle::SC_SliderGroove) << ((qApp->style()->styleHint(QStyle::SH_Slider_AbsoluteSetButtons) & Qt::LeftButton) ? 1 : 0); QTest::newRow("scrollbar on the handle") << int(QStyle::CC_ScrollBar) << 0 << 20 << uint(QStyle::SC_ScrollBarSlider) << 1; QTest::newRow("scrollbar on the groove") << int(QStyle::CC_ScrollBar) << 0 << 20 << uint(QStyle::SC_ScrollBarGroove) << 0; } void tst_QAbstractSlider::sliderPressedReleased() { QFETCH(int, control); QFETCH(int, minimum); QFETCH(int, maximum); QFETCH(uint, subControl); QFETCH(int, expectedCount); QAbstractSlider *slider; switch (control) { default: qWarning("Bad input into test, leaving"); return; break; case QStyle::CC_Slider: slider = new QSlider; slider->setLayoutDirection(Qt::LeftToRight); // Makes "upside down" much easier to compute break; case QStyle::CC_ScrollBar: slider = new QScrollBar; break; } slider->setMinimum(minimum); slider->setMaximum(maximum); slider->setValue(0); slider->setOrientation(Qt::Vertical); slider->resize(slider->sizeHint().width(), slider->sizeHint().height() + 100); QSignalSpy spy1(slider, SIGNAL(sliderPressed())); QSignalSpy spy2(slider, SIGNAL(sliderReleased())); // Mac Style requires the control to be active to get the correct values... slider->show(); slider->activateWindow(); QStyleOptionSlider option; option.init(slider); option.upsideDown = control == QStyle::CC_Slider ? !slider->invertedAppearance() : slider->invertedAppearance(); option.subControls = QStyle::SC_None; option.activeSubControls = QStyle::SC_None; option.orientation = slider->orientation(); option.maximum = maximum; option.minimum = minimum; option.sliderPosition = slider->value(); option.sliderValue = slider->value(); option.singleStep = slider->singleStep(); option.pageStep = slider->pageStep(); QRect rect = slider->style()->subControlRect(QStyle::ComplexControl(control), &option, QStyle::SubControl(subControl), slider); QTest::mousePress(slider, Qt::LeftButton, 0, QPoint(rect.center().x() + 2, rect.center().y() + 2)); QCOMPARE(spy1.count(), expectedCount); QTest::mouseRelease(slider, Qt::LeftButton, 0, rect.center()); QCOMPARE(spy2.count(), expectedCount); delete slider; } void tst_QAbstractSlider::sliderMoved_data() { QTest::addColumn("control"); QTest::addColumn("minimum"); QTest::addColumn("maximum"); QTest::addColumn("position"); QTest::addColumn("sliderDown"); QTest::addColumn("expectedCount"); QTest::newRow("slider pressed") << int(QStyle::CC_Slider) << 0 << 20 << 10 << true << 1; QTest::newRow("slider not pressed") << int(QStyle::CC_Slider) << 0 << 20 << 10 << false << 0; QTest::newRow("scrollbar pressed") << int(QStyle::CC_ScrollBar) << 0 << 20 << 10 << true << 1; QTest::newRow("scrollbar not pressed") << int(QStyle::CC_ScrollBar) << 0 << 20 << 10 << false << 0; } void tst_QAbstractSlider::sliderMoved() { QFETCH(int, control); QFETCH(int, minimum); QFETCH(int, maximum); QFETCH(int, position); QFETCH(bool, sliderDown); QFETCH(int, expectedCount); QAbstractSlider *slider; switch (control) { default: slider = 0; break; case QStyle::CC_Slider: slider = new QSlider; break; case QStyle::CC_ScrollBar: slider = new QScrollBar; break; } QSignalSpy spy(slider, SIGNAL(sliderMoved(int))); slider->setMinimum(minimum); slider->setMaximum(maximum); slider->setSliderDown(sliderDown); slider->setSliderPosition(position); QCOMPARE(spy.count(), expectedCount); delete slider; } void tst_QAbstractSlider::setOrientation() { QSlider slider(0); QSizePolicy sp = slider.sizePolicy(); slider.setOrientation(slider.orientation()); QSizePolicy sp2 = slider.sizePolicy(); QCOMPARE(sp, sp2); slider.setOrientation(Qt::Horizontal); sp = slider.sizePolicy(); slider.setOrientation(Qt::Vertical); sp2 = slider.sizePolicy(); QVERIFY(sp != sp2); sp2.transpose(); QCOMPARE(sp, sp2); } void tst_QAbstractSlider::rangeChanged_data() { QTest::addColumn("minimum"); QTest::addColumn("maximum"); QTest::addColumn("newMin"); QTest::addColumn("newMax"); QTest::addColumn("expectedCount"); QTest::newRow("no change") << 0 << 20 << 0 << 20 << 0; QTest::newRow("min change") << 0 << 20 << 10 << 20 << 1; QTest::newRow("max change") << 0 << 20 << 0 << 30 << 1; QTest::newRow("both change") << 0 << 20 << 10 << 30 << 1; } void tst_QAbstractSlider::rangeChanged() { QFETCH(int, minimum); QFETCH(int, maximum); QFETCH(int, newMin); QFETCH(int, newMax); QFETCH(int, expectedCount); QSlider slider; slider.setRange(minimum, maximum); QSignalSpy spy(&slider, SIGNAL(rangeChanged(int, int))); slider.setRange(newMin, newMax); QCOMPARE(spy.count(), expectedCount); } void tst_QAbstractSlider::setSliderPosition_data() { QTest::addColumn("tracking"); QTest::addColumn("down"); QTest::newRow("tracking, slider down") << true << true; QTest::newRow("tracking, slider not down") << true << false; QTest::newRow("no tracking, slider down") << false << true; QTest::newRow("no tracking, slider not down") << false << false; } void tst_QAbstractSlider::setSliderPosition() { QFETCH(bool, tracking); QFETCH(bool, down); const int minimum = 0; const int maximum = 100; const int initialValue = 50; const int targetPosition = 75; slider->setRange(minimum, maximum); slider->setTracking(tracking); slider->setSliderDown(down); slider->setValue(initialValue); QCOMPARE(slider->sliderPosition(), initialValue); QSignalSpy spy1(slider, SIGNAL(sliderMoved(int))); QSignalSpy spy2(slider, SIGNAL(valueChanged(int))); slider->setSliderPosition(targetPosition); QCOMPARE(slider->sliderPosition(), targetPosition); QCOMPARE(spy1.count(), down ? 1 : 0); QCOMPARE(spy2.count(), tracking ? 1 : 0); QCOMPARE(slider->value(), tracking ? targetPosition : initialValue); if (tracking && down) QVERIFY(sliderMovedTimeStamp < valueChangedTimeStamp); } void tst_QAbstractSlider::setValue_data() { QTest::addColumn("down"); QTest::newRow("slider down") << true; QTest::newRow("slider not down") << false; } void tst_QAbstractSlider::setValue() { QFETCH(bool, down); const int minimum = 0; const int maximum = 100; slider->setRange(minimum, maximum); slider->setSliderDown(down); slider->setValue(49); // to force a valueChanged() below QSignalSpy spy1(slider, SIGNAL(sliderMoved(int))); QSignalSpy spy2(slider, SIGNAL(valueChanged(int))); QSignalSpy spy3(slider, SIGNAL(actionTriggered(int))); slider->setValue(50); QCOMPARE(spy1.count(), down ? 1 : 0); QCOMPARE(spy2.count(), 1); QCOMPARE(spy3.count(), 0); QCOMPARE(slider->value(), reportedValue); QCOMPARE(slider->sliderPosition(), reportedSliderPosition); if (down) QVERIFY(sliderMovedTimeStamp < valueChangedTimeStamp); } void tst_QAbstractSlider::waitUntilTimeElapsed(const QTime& t, int ms) { const int eps = 80; while (t.elapsed() < ms + eps) QTest::qWait(qMax(ms - t.elapsed() + eps, 25)); } void tst_QAbstractSlider::setRepeatAction() { slider->setRange(0, 1000); slider->setValue(55); slider->setPageStep(10); QSignalSpy spy(slider, SIGNAL(actionTriggered(int))); // Start repeat action with initial delay of 500 ms, and then repeating // every 250 ms. slider->setRepeatAction(QAbstractSlider::SliderPageStepAdd, 500, 250); QCOMPARE(spy.count(), 0); QCOMPARE(slider->value(), 55); QTime t; t.start(); QTest::qWait(300); QCOMPARE(spy.count(), 0); QCOMPARE(slider->value(), 55); waitUntilTimeElapsed(t, 550); QCOMPARE(spy.count(), 1); QCOMPARE(slider->value(), 65); QCOMPARE(spy.at(0).at(0).toUInt(), (uint)QAbstractSlider::SliderPageStepAdd); waitUntilTimeElapsed(t, 790); QCOMPARE(spy.count(), 2); QCOMPARE(slider->value(), 75); QCOMPARE(spy.at(1).at(0).toUInt(), (uint)QAbstractSlider::SliderPageStepAdd); waitUntilTimeElapsed(t, 1790); QCOMPARE(spy.count(), 6); QCOMPARE(slider->value(), 115); QCOMPARE(spy.at(4).at(0).toUInt(), (uint)QAbstractSlider::SliderPageStepAdd); QCOMPARE(spy.at(5).at(0).toUInt(), (uint)QAbstractSlider::SliderPageStepAdd); slider->setRepeatAction(QAbstractSlider::SliderNoAction); QCOMPARE(spy.count(), 6); QCOMPARE(slider->value(), 115); QTest::qWait(300); QCOMPARE(spy.count(), 6); QCOMPARE(slider->value(), 115); } QTEST_MAIN(tst_QAbstractSlider) #include "tst_qabstractslider.moc"