/****************************************************************************
**
** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
** Contact: Nokia Corporation (qt-info@nokia.com)
**
** This file is part of the test suite of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:LGPL$
** No Commercial Usage
** This file contains pre-release code and may not be distributed.
** You may use this file in accordance with the terms and conditions
** contained in the either Technology Preview License Agreement or the
** Beta Release License Agreement.
**
** GNU Lesser General Public License Usage
** Alternatively, this file may be used under the terms of the GNU Lesser
** General Public License version 2.1 as published by the Free Software
** Foundation and appearing in the file LICENSE.LGPL included in the
** packaging of this file.  Please review the following information to
** ensure the GNU Lesser General Public License version 2.1 requirements
** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
**
** In addition, as a special exception, Nokia gives you certain
** additional rights. These rights are described in the Nokia Qt LGPL
** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
** package.
**
** GNU General Public License Usage
** Alternatively, this file may be used under the terms of the GNU
** General Public License version 3.0 as published by the Free Software
** Foundation and appearing in the file LICENSE.GPL included in the
** packaging of this file.  Please review the following information to
** ensure the GNU General Public License version 3.0 requirements will be
** met: http://www.gnu.org/copyleft/gpl.html.
**
** If you are unsure which license is appropriate for your use, please
** contact the sales department at http://www.qtsoftware.com/contact.
** $QT_END_LICENSE$
**
****************************************************************************/


#include <QtTest/QtTest>
#include <qapplication.h>
#include <qgroupbox.h>
#include <qlineedit.h>
#include <qwindowsstyle.h>



#include <qdatetimeedit.h>
#include <qlocale.h>
#include <qlayout.h>
#include <qeventloop.h>
#include <qstyle.h>
#include <qstyle.h>
#include <QStyleOptionSpinBox>
#include <QDate>
#include <QDateTime>
#include <QTime>
#include <QList>
#include <QDateTimeEdit>
#include <QCalendarWidget>
#include <QWidget>
#include <QLineEdit>
#include <QObject>
#include <QLocale>
#include <QString>
#include <QVariantList>
#include <QVariant>
#include <QApplication>
#include <QPoint>
#include <QVBoxLayout>
#include <QRect>
#include <QCursor>
#include <QEventLoop>
#include <QStyle>
#include <QStyleOptionComboBox>
#include <QTimeEdit>
#include <QMetaType>
#include <QDebug>
#include <QWheelEvent>
#include <QTest>
#include <QSignalSpy>
#include <QTestEventList>
#include <QDateEdit>

#ifdef Q_OS_WIN
# include <windows.h>
# undef min
# undef max
#endif


Q_DECLARE_METATYPE(QDate);
Q_DECLARE_METATYPE(Qt::Key);
Q_DECLARE_METATYPE(Qt::KeyboardModifiers);
Q_DECLARE_METATYPE(Qt::KeyboardModifier);
Q_DECLARE_METATYPE(QDateTime);
Q_DECLARE_METATYPE(QTime);
Q_DECLARE_METATYPE(QList<int>);

#if defined(Q_OS_WINCE)
bool qt_wince_is_platform(const QString &platformString) {
    TCHAR tszPlatform[64];
    if (SystemParametersInfo(SPI_GETPLATFORMTYPE,
                             sizeof(tszPlatform)/sizeof(*tszPlatform),tszPlatform,0))
      if (0 == _tcsicmp(reinterpret_cast<const wchar_t *> (platformString.utf16()), tszPlatform))
            return true;
    return false;
}
bool qt_wince_is_pocket_pc() {
    return qt_wince_is_platform(QString::fromLatin1("PocketPC"));
}
bool qt_wince_is_smartphone() {
       return qt_wince_is_platform(QString::fromLatin1("Smartphone"));
}
bool qt_wince_is_mobile() {
     return (qt_wince_is_smartphone() || qt_wince_is_pocket_pc());
}
#endif


//TESTED_CLASS=
//TESTED_FILES=

class EditorDateEdit : public QDateTimeEdit
{
    Q_OBJECT
public:
    EditorDateEdit(QWidget *parent = 0) : QDateTimeEdit(parent) {}
    QLineEdit *lineEdit() { return QDateTimeEdit::lineEdit(); }
    friend class tst_QDateTimeEdit;
};

class tst_QDateTimeEdit : public QObject
{
    Q_OBJECT
public:
    tst_QDateTimeEdit();
    virtual ~tst_QDateTimeEdit();
public slots:
    void initTestCase();
    void init();
    void cleanup();
    void cleanupTestCase();
private slots:
    void cachedDayTest();
    void getSetCheck();
    void constructor_qwidget();
    void constructor_qdatetime_data();
    void constructor_qdatetime();
    void constructor_qdate_data();
    void constructor_qdate();
    void constructor_qtime_data();
    void constructor_qtime();

    void sectionText_data();
    void sectionText();
    void dateTimeSignalChecking_data();
    void dateTimeSignalChecking();
    void mousePress();
    void stepHourAMPM_data();

    void stepHourAMPM();
    void displayedSections_data();
    void displayedSections();
    void currentSection_data();
    void currentSection();

    void setCurrentSection();
    void setCurrentSection_data();

    void minimumDate_data();
    void minimumDate();
    void maximumDate_data();
    void maximumDate();
    void clearMinimumDate_data();
    void clearMinimumDate();
    void clearMaximumDate_data();
    void clearMaximumDate();

    void minimumDateTime_data();
    void minimumDateTime();
    void maximumDateTime_data();
    void maximumDateTime();

    void clearMinimumDateTime_data();
    void clearMinimumDateTime();
    void clearMaximumDateTime_data();
    void clearMaximumDateTime();

    void displayFormat_data();
    void displayFormat();

    void specialValueText();
    void setRange_data();
    void setRange();

    void selectAndScrollWithKeys();
    void backspaceKey();
    void deleteKey();
    void tabKeyNavigation();
    void tabKeyNavigationWithPrefix();
    void tabKeyNavigationWithSuffix();
    void enterKey();

    void readOnly();

    void wrappingDate_data();
    void wrappingDate();

    void dateSignalChecking_data();
    void dateSignalChecking();

    void wrappingTime_data();
    void wrappingTime();

    void userKeyPress_Time_data();
    void userKeyPress_Time();

    void timeSignalChecking_data();
    void timeSignalChecking();

    void weirdCase();
    void newCase();
    void newCase2();
    void newCase3();
    void newCase4();
    void newCase5();
    void newCase6();

    void task98554();
    void task149097();

    void cursorPos();
    void calendarPopup();

    void hour12Test();
    void yyTest();
    void task108572();

    void task148725();
    void task148522();

    void setSelectedSection();
    void reverseTest();

    void ddMMMMyyyy();
    void wheelEvent();

    void specialValueCornerCase();
    void cursorPositionOnInit();

    void task118867();

    void nextPrevSection_data();
    void nextPrevSection();

    void dateEditTimeEditFormats();
    void timeSpec_data();
    void timeSpec();
    void timeSpecBug();

    void monthEdgeCase();
    void setLocale();

    void potentialYYValueBug();
    void textSectionAtEnd();

    void keypadAutoAdvance_data();
    void keypadAutoAdvance();

    void task196924();
    void focusNextPrevChild();
private:
    EditorDateEdit* testWidget;
    QWidget *testFocusWidget;
};

typedef QList<QTime> TimeList;
typedef QList<Qt::Key> KeyList;

Q_DECLARE_METATYPE(TimeList)
Q_DECLARE_METATYPE(KeyList)

// Testing get/set functions
void tst_QDateTimeEdit::getSetCheck()
{
    QDateTimeEdit obj1;
    obj1.setDisplayFormat("dd/MM/yyyy hh:mm:ss.zzz d/M/yy h:m:s.z AP");
    // Section QDateTimeEdit::currentSection()
    // void QDateTimeEdit::setCurrentSection(Section)
    obj1.setCurrentSection(QDateTimeEdit::NoSection);
    QVERIFY(obj1.currentSection() != QDateTimeEdit::NoSection);
    obj1.setCurrentSection(QDateTimeEdit::AmPmSection);
    QCOMPARE(QDateTimeEdit::AmPmSection, obj1.currentSection());
    obj1.setCurrentSection(QDateTimeEdit::MSecSection);
    QCOMPARE(QDateTimeEdit::MSecSection, obj1.currentSection());
    obj1.setCurrentSection(QDateTimeEdit::SecondSection);
    QCOMPARE(QDateTimeEdit::SecondSection, obj1.currentSection());
    obj1.setCurrentSection(QDateTimeEdit::MinuteSection);
    QCOMPARE(QDateTimeEdit::MinuteSection, obj1.currentSection());
    obj1.setCurrentSection(QDateTimeEdit::HourSection);
    QCOMPARE(QDateTimeEdit::HourSection, obj1.currentSection());
    obj1.setCurrentSection(QDateTimeEdit::DaySection);
    QCOMPARE(QDateTimeEdit::DaySection, obj1.currentSection());
    obj1.setCurrentSection(QDateTimeEdit::MonthSection);
    QCOMPARE(QDateTimeEdit::MonthSection, obj1.currentSection());
    obj1.setCurrentSection(QDateTimeEdit::YearSection);
    QCOMPARE(QDateTimeEdit::YearSection, obj1.currentSection());
}

tst_QDateTimeEdit::tst_QDateTimeEdit()
{
    qRegisterMetaType<QDate>("QDate");
    qRegisterMetaType<QTime>("QTime");
    qRegisterMetaType<QDateTime>("QDateTime");
    qRegisterMetaType<QList<int> >("QList<int>");
}

tst_QDateTimeEdit::~tst_QDateTimeEdit()
{

}

void tst_QDateTimeEdit::initTestCase()
{
    QLocale system = QLocale::system();
    if (system.language() != QLocale::C && system.language() != QLocale::English)
        qWarning("Running under locale %s/%s -- this test may generate failures due to language differences",
                 qPrintable(QLocale::languageToString(system.language())),
                 qPrintable(QLocale::countryToString(system.country())));
    testWidget = new EditorDateEdit(0);
    testFocusWidget = new QWidget(0);
    testFocusWidget->resize(200, 100);
    testFocusWidget->show();
}

void tst_QDateTimeEdit::cleanupTestCase()
{
    delete testFocusWidget;
    testFocusWidget = 0;
    delete testWidget;
    testWidget = 0;
}


void tst_QDateTimeEdit::init()
{
    QLocale::setDefault(QLocale(QLocale::C));
#if defined(Q_OS_WIN) && !defined(Q_OS_WINCE)
    SetThreadLocale(MAKELCID(MAKELANGID(LANG_ENGLISH, SUBLANG_ENGLISH_US), SORT_DEFAULT));
#endif
    testWidget->setDisplayFormat("dd/MM/yyyy"); // Nice default to have
    testWidget->setDateTime(QDateTime(QDate(2000, 1, 1), QTime(0, 0)));
    testWidget->show();
    testFocusWidget->move(-1000, -1000);
}

void tst_QDateTimeEdit::cleanup()
{
    testWidget->clearMinimumDateTime();
    testWidget->clearMaximumDateTime();
    testWidget->setTimeSpec(Qt::LocalTime);
    testWidget->setSpecialValueText(QString());
    testWidget->setWrapping(false);
}

void tst_QDateTimeEdit::constructor_qwidget()
{
    testWidget->hide();
    QDateTimeEdit dte(0);
    dte.show();
    QCOMPARE(dte.dateTime(), QDateTime(QDate(2000, 1, 1), QTime(0, 0, 0, 0)));
    QCOMPARE(dte.minimumDate(), QDate(1752, 9, 14));
    QCOMPARE(dte.minimumTime(), QTime(0, 0, 0, 0));
    QCOMPARE(dte.maximumDate(), QDate(7999, 12, 31));
    QCOMPARE(dte.maximumTime(), QTime(23, 59, 59, 999));
}

void tst_QDateTimeEdit::constructor_qdatetime_data()
{
    QTest::addColumn<QDateTime>("parameter");
    QTest::addColumn<QDateTime>("displayDateTime");
    QTest::addColumn<QDate>("minimumDate");
    QTest::addColumn<QTime>("minimumTime");
    QTest::addColumn<QDate>("maximumDate");
    QTest::addColumn<QTime>("maximumTime");

    QTest::newRow("normal") << QDateTime(QDate(2004, 6, 16), QTime(13, 46, 32, 764))
			 << QDateTime(QDate(2004, 6, 16), QTime(13, 46, 32, 764))
			 << QDate(1752, 9, 14) << QTime(0, 0, 0, 0)
			 << QDate(7999, 12, 31) << QTime(23, 59, 59, 999);

    QTest::newRow("invalid") << QDateTime(QDate(9999, 99, 99), QTime(13, 46, 32, 764))
			  << QDateTime(QDate(2000, 1, 1), QTime(0, 0, 0, 0))
			  << QDate(1752, 9, 14) << QTime(0, 0, 0, 0)
			  << QDate(7999, 12, 31) << QTime(23, 59, 59, 999);
}



void tst_QDateTimeEdit::constructor_qdatetime()
{
    QFETCH(QDateTime, parameter);
    QFETCH(QDateTime, displayDateTime);
    QFETCH(QDate, minimumDate);
    QFETCH(QTime, minimumTime);
    QFETCH(QDate, maximumDate);
    QFETCH(QTime, maximumTime);

    testWidget->hide();

    QDateTimeEdit dte(parameter);
    dte.show();
    QCOMPARE(dte.dateTime(), displayDateTime);
    QCOMPARE(dte.minimumDate(), minimumDate);
    QCOMPARE(dte.minimumTime(), minimumTime);
    QCOMPARE(dte.maximumDate(), maximumDate);
    QCOMPARE(dte.maximumTime(), maximumTime);
}

void tst_QDateTimeEdit::constructor_qdate_data()
{
    QTest::addColumn<QDate>("parameter");
    QTest::addColumn<QDateTime>("displayDateTime");
    QTest::addColumn<QDate>("minimumDate");
    QTest::addColumn<QTime>("minimumTime");
    QTest::addColumn<QDate>("maximumDate");
    QTest::addColumn<QTime>("maximumTime");

    QTest::newRow("normal") << QDate(2004, 6, 16)
			 << QDateTime(QDate(2004, 6, 16), QTime(0, 0, 0, 0))
			 << QDate(1752, 9, 14) << QTime(0, 0, 0, 0)
			 << QDate(7999, 12, 31) << QTime(23, 59, 59, 999);

    QTest::newRow("invalid") << QDate(9999, 99, 99)
			  << QDateTime(QDate(2000, 1, 1), QTime(0, 0, 0, 0))
			  << QDate(1752, 9, 14) << QTime(0, 0, 0, 0)
			  << QDate(7999, 12, 31) << QTime(23, 59, 59, 999);
}



void tst_QDateTimeEdit::constructor_qdate()
{
    QFETCH(QDate, parameter);
    QFETCH(QDateTime, displayDateTime);
    QFETCH(QDate, minimumDate);
    QFETCH(QTime, minimumTime);
    QFETCH(QDate, maximumDate);
    QFETCH(QTime, maximumTime);

    testWidget->hide();

    QDateTimeEdit dte(parameter);
    dte.show();
    QCOMPARE(dte.dateTime(), displayDateTime);
    QCOMPARE(dte.minimumDate(), minimumDate);
    QCOMPARE(dte.minimumTime(), minimumTime);
    QCOMPARE(dte.maximumDate(), maximumDate);
    QCOMPARE(dte.maximumTime(), maximumTime);
}

void tst_QDateTimeEdit::constructor_qtime_data()
{
    QTest::addColumn<QTime>("parameter");
    QTest::addColumn<QDateTime>("displayDateTime");
    QTest::addColumn<QDate>("minimumDate");
    QTest::addColumn<QTime>("minimumTime");
    QTest::addColumn<QDate>("maximumDate");
    QTest::addColumn<QTime>("maximumTime");

    QTest::newRow("normal") << QTime(13, 46, 32, 764)
			 << QDateTime(QDate(2000, 1, 1), QTime(13, 46, 32, 764))
			 << QDate(2000, 1, 1) << QTime(0, 0, 0, 0)
			 << QDate(2000, 1, 1) << QTime(23, 59, 59, 999);

    QTest::newRow("invalid") << QTime(99, 99, 99, 5000)
			  << QDateTime(QDate(2000, 1, 1), QTime(0, 0, 0, 0))
			  << QDate(2000, 1, 1) << QTime(0, 0, 0, 0)
			  << QDate(2000, 1, 1) << QTime(23, 59, 59, 999);
}



void tst_QDateTimeEdit::constructor_qtime()
{
    QFETCH(QTime, parameter);
    QFETCH(QDateTime, displayDateTime);
    QFETCH(QDate, minimumDate);
    QFETCH(QTime, minimumTime);
    QFETCH(QDate, maximumDate);
    QFETCH(QTime, maximumTime);

    testWidget->hide();

    QDateTimeEdit dte(parameter);
    dte.show();
    QCOMPARE(dte.dateTime(), displayDateTime);
    QCOMPARE(dte.minimumDate(), minimumDate);
    QCOMPARE(dte.minimumTime(), minimumTime);
    QCOMPARE(dte.maximumDate(), maximumDate);
    QCOMPARE(dte.maximumTime(), maximumTime);
}

void tst_QDateTimeEdit::minimumDate_data()
{
    QTest::addColumn<QDate>("minimumDate");
    QTest::addColumn<QDate>("expectedMinDate");

    QTest::newRow("normal-0") << QDate(2004, 5, 10) << QDate(2004, 5, 10);
    QTest::newRow("normal-1") << QDate(2002, 3, 15) << QDate(2002, 3, 15);
    QTest::newRow("normal-2") << QDate(7999, 12, 31) << QDate(7999, 12, 31);
    QTest::newRow("normal-3") << QDate(1753, 1, 1) << QDate(1753, 1, 1);
    QTest::newRow("invalid-0") << QDate(0, 0, 0) << QDate(1752, 9, 14);
    QTest::newRow("old") << QDate(1492, 8, 3) << QDate(1492, 8, 3);
}

void tst_QDateTimeEdit::minimumDate()
{
    QFETCH(QDate, minimumDate);
    QFETCH(QDate, expectedMinDate);

    testWidget->setMinimumDate(minimumDate);
    QCOMPARE(testWidget->minimumDate(), expectedMinDate);
}

void tst_QDateTimeEdit::minimumDateTime_data()
{
    QTest::addColumn<QDateTime>("minimumDateTime");
    QTest::addColumn<QDateTime>("expectedMinDateTime");

    QTest::newRow("normal-0") << QDateTime(QDate(2004, 5, 10), QTime(2, 3, 14))
                              << QDateTime(QDate(2004, 5, 10), QTime(2, 3, 14));

    QTest::newRow("normal-1") << QDateTime(QDate(2005, 5, 10), QTime(22, 33, 1))
                              << QDateTime(QDate(2005, 5, 10), QTime(22, 33, 1));
    QTest::newRow("normal-2") << QDateTime(QDate(2006, 5, 10), QTime(13, 31, 23))
                              << QDateTime(QDate(2006, 5, 10), QTime(13, 31, 23));
    QTest::newRow("normal-3") << QDateTime(QDate(2007, 5, 10), QTime(22, 23, 23))
                              << QDateTime(QDate(2007, 5, 10), QTime(22, 23, 23));
    QTest::newRow("normal-4") << QDateTime(QDate(2008, 5, 10), QTime(2, 3, 1))
                              << QDateTime(QDate(2008, 5, 10), QTime(2, 3, 1));
    QTest::newRow("invalid-0") << QDateTime() << QDateTime(QDate(1752, 9, 14), QTime(0, 0, 0));
    QTest::newRow("old") << QDateTime(QDate(1492, 8, 3), QTime(2, 3, 1))
                         << QDateTime(QDate(1492, 8, 3), QTime(2, 3, 1));
}

void tst_QDateTimeEdit::minimumDateTime()
{
    QFETCH(QDateTime, minimumDateTime);
    QFETCH(QDateTime, expectedMinDateTime);

    testWidget->setMinimumDateTime(minimumDateTime);
    QCOMPARE(testWidget->minimumDateTime(), expectedMinDateTime);
}


void tst_QDateTimeEdit::maximumDateTime_data()
{
    QTest::addColumn<QDateTime>("maximumDateTime");
    QTest::addColumn<QDateTime>("expectedMinDateTime");

    QTest::newRow("normal-0") << QDateTime(QDate(2004, 5, 10), QTime(2, 3, 14))
                              << QDateTime(QDate(2004, 5, 10), QTime(2, 3, 14));

    QTest::newRow("normal-1") << QDateTime(QDate(2005, 5, 10), QTime(22, 33, 1))
                              << QDateTime(QDate(2005, 5, 10), QTime(22, 33, 1));
    QTest::newRow("normal-2") << QDateTime(QDate(2006, 5, 10), QTime(13, 31, 23))
                              << QDateTime(QDate(2006, 5, 10), QTime(13, 31, 23));
    QTest::newRow("normal-3") << QDateTime(QDate(2007, 5, 10), QTime(22, 23, 23))
                              << QDateTime(QDate(2007, 5, 10), QTime(22, 23, 23));
    QTest::newRow("normal-4") << QDateTime(QDate(2008, 5, 10), QTime(2, 3, 1))
                              << QDateTime(QDate(2008, 5, 10), QTime(2, 3, 1));
    QTest::newRow("invalid-0") << QDateTime() << QDateTime(QDate(7999, 12, 31), QTime(23, 59, 59, 999));
}

void tst_QDateTimeEdit::maximumDateTime()
{
    QFETCH(QDateTime, maximumDateTime);
    QFETCH(QDateTime, expectedMinDateTime);

    testWidget->setMaximumDateTime(maximumDateTime);
    QCOMPARE(testWidget->maximumDateTime(), expectedMinDateTime);
}

void tst_QDateTimeEdit::maximumDate_data()
{
    QTest::addColumn<QDate>("maximumDate");
    QTest::addColumn<QDate>("expectedMaxDate");

    QTest::newRow("normal-0") << QDate(2004, 05, 10) << QDate(2004, 5, 10);
    QTest::newRow("normal-1") << QDate(2002, 03, 15) << QDate(2002, 3, 15);
    QTest::newRow("normal-2") << QDate(7999, 12, 31) << QDate(7999, 12, 31);
    QTest::newRow("normal-3") << QDate(1753, 1, 1) << QDate(1753, 1, 1);
    QTest::newRow("invalid-0") << QDate(0, 0, 0) << QDate(7999, 12, 31);
}

void tst_QDateTimeEdit::maximumDate()
{
    QFETCH(QDate, maximumDate);
    QFETCH(QDate, expectedMaxDate);

    testWidget->setMaximumDate(maximumDate);
    QCOMPARE(testWidget->maximumDate(), expectedMaxDate);
}

void tst_QDateTimeEdit::clearMinimumDate_data()
{
    QTest::addColumn<QDate>("minimumDate");
    QTest::addColumn<bool>("valid");
    QTest::addColumn<QDate>("expectedMinDateAfterClear");

    QTest::newRow("normal-0") << QDate(2004, 05, 10) << true << QDate(1752, 9, 14);
    QTest::newRow("normal-1") << QDate(2002, 3, 15) << true << QDate(1752, 9, 14);
    QTest::newRow("normal-2") << QDate(7999, 12, 31) << true << QDate(1752, 9, 14);
    QTest::newRow("normal-3") << QDate(1753, 1, 1) << true << QDate(1752, 9, 14);
    QTest::newRow("invalid-0") << QDate(0, 0, 0) << false << QDate(1752, 9, 14);
}

void tst_QDateTimeEdit::clearMinimumDate()
{
    QFETCH(QDate, minimumDate);
    QFETCH(bool, valid);
    QFETCH(QDate, expectedMinDateAfterClear);

    testWidget->setMinimumDate(minimumDate);
    if (valid) {
	QCOMPARE(testWidget->minimumDate(), minimumDate);
    }
    testWidget->clearMinimumDate();
    QCOMPARE(testWidget->minimumDate(), expectedMinDateAfterClear);
}

void tst_QDateTimeEdit::clearMinimumDateTime_data()
{
    QTest::addColumn<QDateTime>("minimumDateTime");
    QTest::addColumn<bool>("valid");
    QTest::addColumn<QDateTime>("expectedMinDateTimeAfterClear");

    QTest::newRow("normal-0") << QDateTime(QDate(2004, 05, 10), QTime(12, 12, 12))
                              << true << QDateTime(QDate(1752, 9, 14), QTime(0, 0));
    QTest::newRow("normal-1") << QDateTime(QDate(2002, 3, 15), QTime(13, 13, 13))
                              << true << QDateTime(QDate(1752, 9, 14), QTime(0, 0));
    QTest::newRow("normal-2") << QDateTime(QDate(7999, 12, 31), QTime(14, 14, 14))
                              << true << QDateTime(QDate(1752, 9, 14), QTime(0, 0));
    QTest::newRow("normal-3") << QDateTime(QDate(1753, 1, 1), QTime(15, 15, 15))
                              << true << QDateTime(QDate(1752, 9, 14), QTime(0, 0));
    QTest::newRow("invalid-0") << QDateTime() << false << QDateTime(QDate(1752, 9, 14), QTime(0, 0));
    QTest::newRow("old") << QDateTime(QDate(1492, 8, 3), QTime(2, 3, 1)) << true
                         << QDateTime(QDate(1752, 9, 14), QTime(0, 0));

}

void tst_QDateTimeEdit::clearMinimumDateTime()
{
    QFETCH(QDateTime, minimumDateTime);
    QFETCH(bool, valid);
    QFETCH(QDateTime, expectedMinDateTimeAfterClear);

    testWidget->setMinimumDateTime(minimumDateTime);
    if (valid) {
	QCOMPARE(testWidget->minimumDateTime(), minimumDateTime);
    }
    testWidget->clearMinimumDateTime();
    QCOMPARE(testWidget->minimumDateTime(), expectedMinDateTimeAfterClear);
}


void tst_QDateTimeEdit::clearMaximumDateTime_data()
{
    QTest::addColumn<QDateTime>("maximumDateTime");
    QTest::addColumn<bool>("valid");
    QTest::addColumn<QDateTime>("expectedMinDateTimeAfterClear");

    QTest::newRow("normal-0") << QDateTime(QDate(2004, 05, 10), QTime(12, 12, 12))
                              << true << QDateTime(QDate(7999, 12, 31), QTime(23, 59, 59, 999));
    QTest::newRow("normal-1") << QDateTime(QDate(2002, 3, 15), QTime(13, 13, 13))
                              << true << QDateTime(QDate(7999, 12, 31), QTime(23, 59, 59, 999));
    QTest::newRow("normal-2") << QDateTime(QDate(7999, 12, 31), QTime(14, 14, 14))
                              << true << QDateTime(QDate(7999, 12, 31), QTime(23, 59, 59, 999));
    QTest::newRow("normal-3") << QDateTime(QDate(1753, 1, 1), QTime(15, 15, 15))
                              << true << QDateTime(QDate(7999, 12, 31), QTime(23, 59, 59, 999));
    QTest::newRow("invalid-0") << QDateTime()
                               << false << QDateTime(QDate(7999, 12, 31), QTime(23, 59, 59, 999));
}

void tst_QDateTimeEdit::clearMaximumDateTime()
{
    QFETCH(QDateTime, maximumDateTime);
    QFETCH(bool, valid);
    QFETCH(QDateTime, expectedMinDateTimeAfterClear);

    testWidget->setMaximumDateTime(maximumDateTime);
    if (valid) {
	QCOMPARE(testWidget->maximumDateTime(), maximumDateTime);
    }
    testWidget->clearMaximumDateTime();
    QCOMPARE(testWidget->maximumDateTime(), expectedMinDateTimeAfterClear);
}


void tst_QDateTimeEdit::clearMaximumDate_data()
{
    QTest::addColumn<QDate>("maximumDate");
    QTest::addColumn<bool>("valid");
    QTest::addColumn<QDate>("expectedMaxDateAfterClear");

    QTest::newRow("normal-0") << QDate(2004, 05, 10) << true << QDate(7999, 12, 31);
    QTest::newRow("normal-1") << QDate(2002, 03, 15) << true << QDate(7999, 12, 31);
    QTest::newRow("normal-2") << QDate(7999, 12, 31) << true << QDate(7999, 12, 31);
    QTest::newRow("normal-3") << QDate(2000, 1, 1) << true << QDate(7999, 12, 31);
    QTest::newRow("invalid-0") << QDate(0, 0, 0) << false << QDate(7999, 12, 31);
}

void tst_QDateTimeEdit::clearMaximumDate()
{
    QFETCH(QDate, maximumDate);
    QFETCH(bool, valid);
    QFETCH(QDate, expectedMaxDateAfterClear);

    testWidget->setMaximumDate(maximumDate);
    if (valid) {
	QCOMPARE(testWidget->maximumDate(), maximumDate);
    }
    testWidget->clearMaximumDate();
    QCOMPARE(testWidget->maximumDate(), expectedMaxDateAfterClear);
}

void tst_QDateTimeEdit::displayFormat_data()
{
    QTest::addColumn<QString>("format");
    QTest::addColumn<bool>("valid");
    QTest::addColumn<QString>("text");
    QTest::addColumn<QDateTime>("date");

    const QDateTime dt(QDate(2999, 12, 31), QTime(3, 59, 59, 999));

    QTest::newRow("valid-0") << QString("yyyy MM dd") << true << QString("2999 12 31") << dt;
    QTest::newRow("valid-1") << QString("dd MM yyyy::ss:mm:hh") << true
                             << QString("31 12 2999::59:59:03") << dt;
    QTest::newRow("valid-2") << QString("hh-dd-mm-MM-yy") << true << QString("03-31-59-12-99") << dt;
    QTest::newRow("valid-3") << QString("ddd MM d yyyy::ss:mm:hh") << true
                             << QDate::shortDayName(2) + " 12 31 2999::59:59:03" << dt;
    QTest::newRow("valid-4") << QString("hh-dd-mm-MM-yyyy") << true << QString("03-31-59-12-2999") << dt;
    QTest::newRow("invalid-0") << QString("yyyy.MM.yy") << true << QString("2999.12.99") << dt;
    QTest::newRow("invalid-1") << QString("y") << false << QString() << dt;
    QTest::newRow("invalid-2") << QString("") << false << QString() << dt;
    QTest::newRow("quoted-1") << QString("'Midday is at:' dd") << true << QString("Midday is at: 31") << dt;
    QTest::newRow("leading1") << QString("h:hh:hhh") << true << QString("3:03:033") << dt;
    QTest::newRow("H1") << QString("HH:hh:ap") << true << QString("03:03:am") << dt;
    QTest::newRow("H2") << QString("HH:hh:ap") << true << QString("23:11:pm")
                        << QDateTime(dt.date(), QTime(23, 0, 0));
}

void tst_QDateTimeEdit::displayFormat()
{
    QFETCH(QString, format);
    QFETCH(bool, valid);
    QFETCH(QString, text);
    QFETCH(QDateTime, date);

    testWidget->setDateTime(date);

    QString compareFormat = format;
    if (!valid)
	compareFormat = testWidget->displayFormat();
    testWidget->setDisplayFormat(format);
    QCOMPARE(testWidget->displayFormat(), compareFormat);
    if (valid)
        QCOMPARE(testWidget->text(), text);
}

void tst_QDateTimeEdit::selectAndScrollWithKeys()
{
    qApp->setActiveWindow(testWidget);
    testWidget->setDate(QDate(2004, 05, 11));
    testWidget->setDisplayFormat("dd/MM/yyyy");
    testWidget->show();
#ifdef Q_WS_MAC
    QTest::keyClick(testWidget, Qt::Key_Left, Qt::ControlModifier);
#else
    QTest::keyClick(testWidget, Qt::Key_Home);
#endif
    QTest::keyClick(testWidget, Qt::Key_Right, Qt::ShiftModifier);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("1"));
    QTest::keyClick(testWidget, Qt::Key_Right, Qt::ShiftModifier);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("11"));
    QTest::keyClick(testWidget, Qt::Key_Right, Qt::ShiftModifier);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("11/"));
    QTest::keyClick(testWidget, Qt::Key_Right, Qt::ShiftModifier);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("11/0"));
    QTest::keyClick(testWidget, Qt::Key_Right, Qt::ShiftModifier);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("11/05"));
    QTest::keyClick(testWidget, Qt::Key_Right, Qt::ShiftModifier);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("11/05/"));
    QTest::keyClick(testWidget, Qt::Key_Right, Qt::ShiftModifier);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("11/05/2"));
    QTest::keyClick(testWidget, Qt::Key_Right, Qt::ShiftModifier);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("11/05/20"));
    QTest::keyClick(testWidget, Qt::Key_Right, Qt::ShiftModifier);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("11/05/200"));
    QTest::keyClick(testWidget, Qt::Key_Right, Qt::ShiftModifier);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("11/05/2004"));
    QTest::keyClick(testWidget, Qt::Key_Right, Qt::ShiftModifier);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("11/05/2004"));

    // Now the year part should be selected
    QTest::keyClick(testWidget, Qt::Key_Up);
    QCOMPARE(testWidget->date(), QDate(2005, 5, 11));
    QCOMPARE(testWidget->currentSection(), QDateTimeEdit::YearSection);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("2005"));
    QTest::keyClick(testWidget, Qt::Key_Down);
    QCOMPARE(testWidget->date(), QDate(2004, 5, 11));
    QCOMPARE(testWidget->currentSection(), QDateTimeEdit::YearSection);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("2004"));


#ifdef Q_WS_MAC
    QTest::keyClick(testWidget, Qt::Key_Right, Qt::ControlModifier);
#else
    QTest::keyClick(testWidget, Qt::Key_End);
#endif
    QTest::keyClick(testWidget, Qt::Key_Left, Qt::ShiftModifier);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("4"));
    QTest::keyClick(testWidget, Qt::Key_Left, Qt::ShiftModifier);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("04"));
    QTest::keyClick(testWidget, Qt::Key_Left, Qt::ShiftModifier);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("004"));
    QTest::keyClick(testWidget, Qt::Key_Left, Qt::ShiftModifier);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("2004"));
    QTest::keyClick(testWidget, Qt::Key_Left, Qt::ShiftModifier);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("/2004"));
    QTest::keyClick(testWidget, Qt::Key_Left, Qt::ShiftModifier);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("5/2004"));
    QTest::keyClick(testWidget, Qt::Key_Left, Qt::ShiftModifier);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("05/2004"));
    QTest::keyClick(testWidget, Qt::Key_Left, Qt::ShiftModifier);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("/05/2004"));
    QTest::keyClick(testWidget, Qt::Key_Left, Qt::ShiftModifier);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("1/05/2004"));
    QTest::keyClick(testWidget, Qt::Key_Left, Qt::ShiftModifier);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("11/05/2004"));
    QTest::keyClick(testWidget, Qt::Key_Left, Qt::ShiftModifier);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("11/05/2004"));
#ifdef Q_WS_MAC
    QTest::keyClick(testWidget, Qt::Key_Left, Qt::ControlModifier);
#else
    QTest::keyClick(testWidget, Qt::Key_Home);
#endif

    // Now the day part should be selected
    QTest::keyClick(testWidget, Qt::Key_Up);
    QCOMPARE(testWidget->date(), QDate(2004, 5, 12));
    QCOMPARE(testWidget->currentSection(), QDateTimeEdit::DaySection);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("12"));
    QTest::keyClick(testWidget, Qt::Key_Down);
    QCOMPARE(testWidget->date(), QDate(2004, 5, 11));
    QCOMPARE(testWidget->currentSection(), QDateTimeEdit::DaySection);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("11"));

#ifdef Q_WS_MAC
    QTest::keyClick(testWidget, Qt::Key_Left, Qt::ControlModifier);
#else
    QTest::keyClick(testWidget, Qt::Key_Home);
#endif

    QTest::keyClick(testWidget, Qt::Key_Right, Qt::ShiftModifier);
    QTest::keyClick(testWidget, Qt::Key_Right, Qt::ShiftModifier);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("11"));
    // Now the day part should be selected
    QTest::keyClick(testWidget, Qt::Key_Up);
    QCOMPARE(testWidget->date(), QDate(2004, 05, 12));
}

void tst_QDateTimeEdit::backspaceKey()
{
    qApp->setActiveWindow(testWidget);
    testWidget->setDate(QDate(2004, 05, 11));
    testWidget->setDisplayFormat("d/MM/yyyy");
    testWidget->show();
#ifdef Q_WS_MAC
    QTest::keyClick(testWidget, Qt::Key_Right, Qt::ControlModifier);
#else
    QTest::keyClick(testWidget, Qt::Key_End);
#endif
    QCOMPARE(testWidget->text(), QString("11/05/2004"));
    QTest::keyClick(testWidget, Qt::Key_Backspace);
    QCOMPARE(testWidget->text(), QString("11/05/200"));
    QTest::keyClick(testWidget, Qt::Key_Backspace);
    QCOMPARE(testWidget->text(), QString("11/05/20"));
    // Check that moving into another field reverts it
    for (int i=0;i<3;i++)
	QTest::keyClick(testWidget, Qt::Key_Left);
    QCOMPARE(testWidget->text(), QString("11/05/2004"));
#ifdef Q_WS_MAC
    QTest::keyClick(testWidget, Qt::Key_Right, Qt::ControlModifier);
#else
    QTest::keyClick(testWidget, Qt::Key_End);
#endif
    for (int i=0;i<4;i++) {
	QTest::keyClick(testWidget, Qt::Key_Left, Qt::ShiftModifier);
    }

    QTest::keyClick(testWidget, Qt::Key_Backspace);
    QCOMPARE(testWidget->text(), QString("11/05/"));
    QTest::keyClick(testWidget, Qt::Key_Left);
    QTest::keyClick(testWidget, Qt::Key_Backspace);
    QCOMPARE(testWidget->text(), QString("11/0/2004"));
    testWidget->interpretText();
#ifdef Q_WS_MAC
    QTest::keyClick(testWidget, Qt::Key_Right, Qt::ControlModifier);
#else
    QTest::keyClick(testWidget, Qt::Key_End);
#endif
    QTest::keyClick(testWidget, Qt::Key_Backspace);
    QCOMPARE(testWidget->text(), QString("11/05/200"));
    QTest::keyClick(testWidget, Qt::Key_Backspace);
    QCOMPARE(testWidget->text(), QString("11/05/20"));
    QTest::keyClick(testWidget, Qt::Key_Backspace);
    QCOMPARE(testWidget->text(), QString("11/05/2"));
    QTest::keyClick(testWidget, Qt::Key_Backspace);
    QCOMPARE(testWidget->text(), QString("11/05/"));
    QTest::keyClick(testWidget, Qt::Key_Left);
    QTest::keyClick(testWidget, Qt::Key_Backspace);
    QCOMPARE(testWidget->text(), QString("11/0/2004"));
    QTest::keyClick(testWidget, Qt::Key_Backspace);
    QCOMPARE(testWidget->text(), QString("11//2004"));
    QTest::keyClick(testWidget, Qt::Key_Left);
    QTest::keyClick(testWidget, Qt::Key_Backspace);
    QCOMPARE(testWidget->text(), QString("1/05/2004"));
    QTest::keyClick(testWidget, Qt::Key_Backspace);
    QCOMPARE(testWidget->text(), QString("/05/2004"));
    QTest::keyClick(testWidget, Qt::Key_Backspace);
    QCOMPARE(testWidget->text(), QString("/05/2004"));
    QTest::keyClick(testWidget, Qt::Key_Enter);
    QCOMPARE(testWidget->text(), QString("1/05/2004"));
}

void tst_QDateTimeEdit::deleteKey()
{
    qApp->setActiveWindow(testWidget);
    testWidget->setDate(QDate(2004, 05, 11));
    testWidget->setDisplayFormat("d/MM/yyyy");
#ifdef Q_WS_MAC
    QTest::keyClick(testWidget, Qt::Key_Left, Qt::ControlModifier);
#else
    QTest::keyClick(testWidget, Qt::Key_Home);
#endif
    QTest::keyClick(testWidget, Qt::Key_Delete);
    QCOMPARE(testWidget->text(), QString("1/05/2004"));
    QTest::keyClick(testWidget, Qt::Key_Delete);
    QCOMPARE(testWidget->text(), QString("/05/2004"));
    QTest::keyClick(testWidget, Qt::Key_Right);
    QTest::keyClick(testWidget, Qt::Key_Right);
    QCOMPARE(testWidget->text(), QString("1/05/2004"));
}

void tst_QDateTimeEdit::tabKeyNavigation()
{
    qApp->setActiveWindow(testWidget);
    testWidget->setDate(QDate(2004, 05, 11));
    testWidget->setDisplayFormat("dd/MM/yyyy");
    testWidget->show();
    testWidget->setCurrentSection(QDateTimeEdit::DaySection);

    QTest::keyClick(testWidget, Qt::Key_Tab);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("05"));
    QTest::keyClick(testWidget, Qt::Key_Tab);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("2004"));
    QTest::keyClick(testWidget, Qt::Key_Tab, Qt::ShiftModifier);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("05"));
    QTest::keyClick(testWidget, Qt::Key_Tab, Qt::ShiftModifier);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("11"));
}

void tst_QDateTimeEdit::tabKeyNavigationWithPrefix()
{
    qApp->setActiveWindow(testWidget);
    testWidget->setDate(QDate(2004, 05, 11));
    testWidget->setDisplayFormat("prefix dd/MM/yyyy");

    QTest::keyClick(testWidget, Qt::Key_Tab);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("11"));
    QTest::keyClick(testWidget, Qt::Key_Tab);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("05"));
    QTest::keyClick(testWidget, Qt::Key_Tab);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("2004"));
    QTest::keyClick(testWidget, Qt::Key_Tab, Qt::ShiftModifier);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("05"));
    QTest::keyClick(testWidget, Qt::Key_Tab, Qt::ShiftModifier);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("11"));
}

void tst_QDateTimeEdit::tabKeyNavigationWithSuffix()
{
    qApp->setActiveWindow(testWidget);
    testWidget->setDate(QDate(2004, 05, 11));
    testWidget->setDisplayFormat("dd/MM/yyyy 'suffix'");

    QTest::keyClick(testWidget, Qt::Key_Tab);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("05"));
    QTest::keyClick(testWidget, Qt::Key_Tab);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("2004"));
    QTest::keyClick(testWidget, Qt::Key_Tab, Qt::ShiftModifier);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("05"));
    QTest::keyClick(testWidget, Qt::Key_Tab, Qt::ShiftModifier);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("11"));
}


void tst_QDateTimeEdit::enterKey()
{
    qApp->setActiveWindow(testWidget);
    testWidget->setDate(QDate(2004, 5, 11));
    testWidget->setDisplayFormat("prefix d/MM/yyyy 'suffix'");
    testWidget->lineEdit()->setFocus();

#ifdef Q_WS_MAC
    QTest::keyClick(testWidget, Qt::Key_Left, Qt::ControlModifier);
#else
    QTest::keyClick(testWidget, Qt::Key_Home);
#endif
    QTest::keyClick(testWidget, Qt::Key_Enter);
    QVERIFY(!testWidget->lineEdit()->hasSelectedText());
#ifdef Q_WS_MAC
    QTest::keyClick(testWidget, Qt::Key_Right, Qt::ControlModifier);
#else
    QTest::keyClick(testWidget, Qt::Key_End);
#endif
    QTest::keyClick(testWidget, Qt::Key_Enter);
    QVERIFY(!testWidget->lineEdit()->hasSelectedText());
#ifdef Q_WS_MAC
    QTest::keyClick(testWidget, Qt::Key_Left, Qt::ControlModifier);
#else
    QTest::keyClick(testWidget, Qt::Key_Home);
#endif
    QTest::keyClick(testWidget, Qt::Key_Tab);
    QTest::keyClick(testWidget, Qt::Key_Enter);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("11"));
    QTest::keyClick(testWidget, Qt::Key_1);
    QTest::keyClick(testWidget, Qt::Key_5);

    QTest::keyClick(testWidget, Qt::Key_Left);
    QTest::keyClick(testWidget, Qt::Key_Left);

    QTest::keyClick(testWidget, Qt::Key_Enter);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("15"));
    QCOMPARE(testWidget->date(), QDate(2004, 5, 15));

    QTest::keyClick(testWidget, Qt::Key_9);
    QTest::keyClick(testWidget, Qt::Key_Tab, Qt::ShiftModifier);
    QTest::keyClick(testWidget, Qt::Key_Enter);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("9"));
    QCOMPARE(testWidget->date(), QDate(2004, 5, 9));

    QTest::keyClick(testWidget, Qt::Key_0);
    QTest::keyClick(testWidget, Qt::Key_0);
    QTest::keyClick(testWidget, Qt::Key_Enter);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("9"));
    QCOMPARE(testWidget->date(), QDate(2004, 5, 9));

    QSignalSpy enterSpy(testWidget, SIGNAL(dateChanged(const QDate &)));
    QTest::keyClick(testWidget, Qt::Key_Enter);
    QCOMPARE(enterSpy.count(), 1);

#if 0
    QVariantList list = enterSpy.takeFirst();
    QCOMPARE(list.at(0).toDate(), QDate(2004, 9, 15));
#endif

}

void tst_QDateTimeEdit::specialValueText()
{
    testWidget->setDisplayFormat("dd/MM/yyyy");
    testWidget->setDateRange(QDate(2000, 1, 1), QDate(2001, 1, 1));
    testWidget->setDate(QDate(2000, 1, 2));
    testWidget->setSpecialValueText("fOo");
    testWidget->setCurrentSection(QDateTimeEdit::DaySection);
    QCOMPARE(testWidget->date(), QDate(2000, 1, 2));
    QCOMPARE(testWidget->text(), QString("02/01/2000"));
    QTest::keyClick(testWidget, Qt::Key_Down);
    QCOMPARE(testWidget->date(), QDate(2000, 1, 1));
    QCOMPARE(testWidget->text(), QString("fOo"));
    QTest::keyClick(testWidget, Qt::Key_Down);
    QCOMPARE(testWidget->date(), QDate(2000, 1, 1));
    QCOMPARE(testWidget->text(), QString("fOo"));
    QTest::keyClick(testWidget, Qt::Key_Up);
    QCOMPARE(testWidget->date(), QDate(2000, 1, 2));
    QCOMPARE(testWidget->text(), QString("02/01/2000"));
    QTest::keyClick(testWidget, Qt::Key_Down);
    QCOMPARE(testWidget->date(), QDate(2000, 1, 1));
    QCOMPARE(testWidget->text(), QString("fOo"));

#ifdef Q_WS_MAC
    QTest::keyClick(testWidget, Qt::Key_Right, Qt::ControlModifier);
#else
    QTest::keyClick(testWidget, Qt::Key_End);
#endif
    QTest::keyClick(testWidget, Qt::Key_Up);
    QCOMPARE(testWidget->date(), QDate(2000, 1, 2));
    QCOMPARE(testWidget->text(), QString("02/01/2000"));
    QTest::keyClick(testWidget, Qt::Key_Down);
    QCOMPARE(testWidget->text(), QString("fOo"));

#ifdef Q_WS_MAC
    QTest::keyClick(testWidget, Qt::Key_Right, Qt::ControlModifier);
#else
    QTest::keyClick(testWidget, Qt::Key_End);
#endif
    QTest::keyClick(testWidget, Qt::Key_Backspace);
    QCOMPARE(testWidget->text(), QString("fO"));
    QTest::keyClick(testWidget, Qt::Key_Backspace);
    QCOMPARE(testWidget->text(), QString("f"));
    QTest::keyClick(testWidget, Qt::Key_Backspace);
    QCOMPARE(testWidget->text(), QString());
    QTest::keyClick(testWidget, Qt::Key_F);
    QCOMPARE(testWidget->text(), QString("f"));
    QTest::keyClick(testWidget, Qt::Key_O); // will automatically uppercase
    QCOMPARE(testWidget->text(), QString("fO"));
    QTest::keyClick(testWidget, Qt::Key_O);
    QCOMPARE(testWidget->text(), QString("fOo"));
}


void tst_QDateTimeEdit::setRange_data()
{
    QTest::addColumn<QTime>("minTime");
    QTest::addColumn<QTime>("maxTime");
    QTest::addColumn<QDate>("minDate");
    QTest::addColumn<QDate>("maxDate");
    QTest::addColumn<QDateTime>("expectedMin");
    QTest::addColumn<QDateTime>("expectedMax");

    const QDate cdt = QDate::currentDate();

    QTest::newRow("data0") << QTime(0, 0) << QTime(14, 12, 0)
                           << cdt << cdt
                           << QDateTime(cdt, QTime(0, 0))
                           << QDateTime(cdt, QTime(14, 12, 0));

    QTest::newRow("data1") << QTime(10, 0) << QTime(1, 12, 0) << cdt.addDays(-1)
                           << cdt
                           << QDateTime(cdt.addDays(-1), QTime(10, 0))
                           << QDateTime(cdt, QTime(1, 12, 0));
}

void tst_QDateTimeEdit::setRange()
{
    QFETCH(QTime, minTime);
    QFETCH(QTime, maxTime);
    QFETCH(QDate, minDate);
    QFETCH(QDate, maxDate);
    QFETCH(QDateTime, expectedMin);
    QFETCH(QDateTime, expectedMax);
    testWidget->hide();

    {
        QDateTimeEdit dte(0);
        dte.setTimeRange(minTime, maxTime);
        QCOMPARE(dte.minimumTime(), expectedMin.time());
        QCOMPARE(dte.maximumTime(), expectedMax.time());
        dte.setDateRange(minDate, maxDate);
        QCOMPARE(dte.minimumDate(), expectedMin.date());
        QCOMPARE(dte.minimumDateTime(), expectedMin);
        QCOMPARE(dte.maximumDate(), expectedMax.date());
        QCOMPARE(dte.maximumDateTime(), expectedMax);
        QCOMPARE(dte.minimumTime(), expectedMin.time());
        QCOMPARE(dte.maximumTime(), expectedMax.time());
        dte.setDateTimeRange(QDateTime(minDate, minTime), QDateTime(maxDate, maxTime));
        QCOMPARE(dte.minimumDate(), expectedMin.date());
        QCOMPARE(dte.minimumDateTime(), expectedMin);
        QCOMPARE(dte.maximumDate(), expectedMax.date());
        QCOMPARE(dte.maximumDateTime(), expectedMax);
        QCOMPARE(dte.minimumTime(), expectedMin.time());
        QCOMPARE(dte.maximumTime(), expectedMax.time());
    }
    {

        QDateTimeEdit dte2(0);
        dte2.setDateRange(minDate, maxDate);
        dte2.setTimeRange(minTime, maxTime);

        QCOMPARE(dte2.minimumDate(), expectedMin.date());
        QCOMPARE(dte2.maximumDate(), expectedMax.date());
        QCOMPARE(dte2.minimumTime(), expectedMin.time());
        QCOMPARE(dte2.maximumTime(), expectedMax.time());
    }

    {
        QDateTimeEdit dte3(0);
        dte3.setMinimumTime(minTime);
        dte3.setMaximumTime(maxTime);
        dte3.setMinimumDate(minDate);
        dte3.setMaximumDate(maxDate);

        QCOMPARE(dte3.minimumDate(), expectedMin.date());
        QCOMPARE(dte3.maximumDate(), expectedMax.date());
        QCOMPARE(dte3.minimumTime(), expectedMin.time());
        QCOMPARE(dte3.maximumTime(), expectedMax.time());
    }

    {
        QDateTimeEdit dte4(0);
        dte4.setMinimumDate(minDate);
        dte4.setMaximumDate(maxDate);
        dte4.setMinimumTime(minTime);
        dte4.setMaximumTime(maxTime);

        QCOMPARE(dte4.minimumDate(), expectedMin.date());
        QCOMPARE(dte4.maximumDate(), expectedMax.date());
        QCOMPARE(dte4.minimumTime(), expectedMin.time());
        QCOMPARE(dte4.maximumTime(), expectedMax.time());
    }
}

void tst_QDateTimeEdit::wrappingTime_data()
{
    QTest::addColumn<bool>("startWithMin");
    QTest::addColumn<QTime>("minimumTime");
    QTest::addColumn<QTime>("maximumTime");
    QTest::addColumn<uint>("section");
    QTest::addColumn<QTime>("newTime");

    QTest::newRow("data0") << false << QTime(0,0,0) << QTime(2,2,2) << (uint)QDateTimeEdit::HourSection
                        << QTime(0,2,2);
    QTest::newRow("data1") << true << QTime(0,0,0) << QTime(2,2,2) << (uint)QDateTimeEdit::HourSection
                        << QTime(2,0,0);
    QTest::newRow("data2") << false << QTime(0,0,0) << QTime(2,2,2) << (uint)QDateTimeEdit::MinuteSection
                        << QTime(2,0,2);
    QTest::newRow("data3") << true << QTime(0,0,0) << QTime(2,2,2) << (uint)QDateTimeEdit::MinuteSection
                        << QTime(0,59,0);
    QTest::newRow("data4") << false << QTime(0,0,0) << QTime(2,2,2) << (uint)QDateTimeEdit::SecondSection
                        << QTime(2,2,0);
    QTest::newRow("data5") << true << QTime(0,0,0) << QTime(2,2,2) << (uint)QDateTimeEdit::SecondSection
                        << QTime(0,0,59);
    QTest::newRow("data6") << false << QTime(1,1,1) << QTime(22,22,22) << (uint)QDateTimeEdit::HourSection
                        << QTime(1,22,22);
    QTest::newRow("data7") << true << QTime(1,1,1) << QTime(22,22,22) << (uint)QDateTimeEdit::HourSection
                        << QTime(22,1,1);
    QTest::newRow("data8") << false << QTime(1,1,1) << QTime(22,22,22) << (uint)QDateTimeEdit::MinuteSection
                        << QTime(22,0,22);
    QTest::newRow("data9") << true << QTime(1,1,1) << QTime(22,22,22) << (uint)QDateTimeEdit::MinuteSection
                        << QTime(1,59,1);
    QTest::newRow("data10") << false << QTime(1,1,1) << QTime(22,22,22) << (uint)QDateTimeEdit::SecondSection
                         << QTime(22,22,0);
    QTest::newRow("data11") << true << QTime(1,1,1) << QTime(22,22,22) << (uint)QDateTimeEdit::SecondSection
                         << QTime(1,1,59);
    QTest::newRow("data12") << false << QTime(1,1,1) << QTime(1,2,1) << (uint)QDateTimeEdit::HourSection
                         << QTime(1,2,1);
    QTest::newRow("data13") << true << QTime(1,1,1) << QTime(1,2,1) << (uint)QDateTimeEdit::HourSection
                         << QTime(1,1,1);
    QTest::newRow("data14") << false << QTime(1,1,1) << QTime(1,2,1) << (uint)QDateTimeEdit::MinuteSection
                         << QTime(1,1,1);
    QTest::newRow("data15") << true << QTime(1,1,1) << QTime(1,2,1) << (uint)QDateTimeEdit::MinuteSection
                         << QTime(1,2,1);
    QTest::newRow("data16") << false << QTime(1,1,1) << QTime(1,2,1) << (uint)QDateTimeEdit::SecondSection
                         << QTime(1,2,0);
    QTest::newRow("data17") << true << QTime(1,1,1) << QTime(1,2,1) << (uint)QDateTimeEdit::SecondSection
                         << QTime(1,1,59);
}


void tst_QDateTimeEdit::wrappingTime()
{
    QFETCH(bool, startWithMin);
    QFETCH(QTime, minimumTime);
    QFETCH(QTime, maximumTime);
    QFETCH(uint, section);
    QFETCH(QTime, newTime);

    testWidget->setDisplayFormat("hh:mm:ss");
    testWidget->setMinimumTime(minimumTime);
    testWidget->setMaximumTime(maximumTime);
    testWidget->setWrapping(true);
    testWidget->setCurrentSection((QDateTimeEdit::Section)section);
    if (startWithMin) {
        testWidget->setTime(minimumTime);
        QTest::keyClick(testWidget, Qt::Key_Down);
    } else {
        testWidget->setTime(maximumTime);
        QTest::keyClick(testWidget, Qt::Key_Up);
    }
    QTest::keyClick(testWidget, Qt::Key_Enter);
    QCOMPARE(testWidget->time(), newTime);
}

void tst_QDateTimeEdit::userKeyPress_Time_data()
{
    QTest::addColumn<bool>("ampm");
    QTest::addColumn<QTestEventList>("keys");
    QTest::addColumn<QTime>("expected_time");

    // ***************** test the hours ***************

    // use up/down keys to change hour in 12 h mode
    {
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Down );
        QTime expected( 10, 0, 0 );
        QTest::newRow( "data0" ) << bool(true) << keys << expected;
    }
    {
        QTestEventList keys;
        for (uint i=0; i<5; i++)
            keys.addKeyClick( Qt::Key_Down );
        QTime expected( 6, 0, 0 );
        QTest::newRow( "data1" ) << bool(true) << keys << expected;
    }
    {
        QTestEventList keys;
        for (uint i=0; i<10; i++)
            keys.addKeyClick( Qt::Key_Down );
        QTime expected( 1, 0, 0 );
        QTest::newRow( "data2" ) << bool(true) << keys << expected;
    }
    {
        QTestEventList keys;
        for (uint i=0; i<12; i++)
            keys.addKeyClick( Qt::Key_Down );
        QTime expected( 23, 0, 0 );
        QTest::newRow( "data3" ) << bool(true) << keys << expected;
    }
    {
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Up );
        QTime expected( 12, 0, 0 );
        QTest::newRow( "data4" ) << bool(true) << keys << expected;
    }
    {
        QTestEventList keys;
        for (uint i=0; i<2; i++)
            keys.addKeyClick( Qt::Key_Up );
        QTime expected( 13, 0, 0 );
        QTest::newRow( "data5" ) << bool(true) << keys << expected;
    }

    // use up/down keys to change hour in 24 h mode
    {
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Down );
        QTime expected( 10, 0, 0 );
        QTest::newRow( "data6" ) << bool(false) << keys << expected;
    }
    {
        QTestEventList keys;
        for (uint i=0; i<5; i++)
            keys.addKeyClick( Qt::Key_Down );
        QTime expected( 6, 0, 0 );
        QTest::newRow( "data7" ) << bool(false) << keys << expected;
    }
    {
        QTestEventList keys;
        for (uint i=0; i<10; i++)
            keys.addKeyClick( Qt::Key_Down );
        QTime expected( 1, 0, 0 );
        QTest::newRow( "data8" ) << bool(false) << keys << expected;
    }
    {
        QTestEventList keys;
        for (uint i=0; i<12; i++)
            keys.addKeyClick( Qt::Key_Down );
        QTime expected( 23, 0, 0 );
        QTest::newRow( "data9" ) << bool(false) << keys << expected;
    }
    {
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Up );
        QTime expected( 12, 0, 0 );
        QTest::newRow( "data10" ) << bool(false) << keys << expected;
    }
    {
        QTestEventList keys;
        for (uint i=0; i<2; i++)
            keys.addKeyClick( Qt::Key_Up );
        QTime expected( 13, 0, 0 );
        QTest::newRow( "data11" ) << bool(false) << keys << expected;
    }

    // enter a one digit valid hour
    {
        QTestEventList keys;
        keys.addKeyClick( '5' );
        QTime expected( 5, 0, 0 );
        QTest::newRow( "data12" ) << bool(true) << keys << expected;
    }

    // entering a two digit valid hour
    {
        QTestEventList keys;
        keys.addKeyClick( '1' );
        keys.addKeyClick( '1' );
        QTime expected( 11, 0, 0 );
        QTest::newRow( "data13" ) << bool(true) << keys << expected;
    }

    // entering an invalid hour
    {
        QTestEventList keys;
        keys.addKeyClick( '2' );
        // the '5' creates an invalid hour (25) so it must be ignored
        keys.addKeyClick( '5' );
        QTime expected( 2, 0, 0 );
        QTest::newRow( "data14" ) << bool(true) << keys << expected;
    }

    // enter a value, in hour which causes a field change
    {
        QTestEventList keys;
        keys.addKeyClick( '0' );
        keys.addKeyClick( '2' );
        keys.addKeyClick( '1' );
        QTime expected( 2, 1, 0 );
        QTest::newRow( "data15" ) << bool(true) << keys << expected;
    }

    // enter a one digit valid hour in 24 h mode
    {
        QTestEventList keys;
        keys.addKeyClick( '5' );
        QTime expected( 5, 0, 0 );
        QTest::newRow( "data16" ) << bool(false) << keys << expected;
    }

    // enter a two digit valid hour in 24 h mode
    {
        QTestEventList keys;
        keys.addKeyClick( '1' );
        keys.addKeyClick( '1' );
        QTime expected( 11, 0, 0 );
        QTest::newRow( "data17" ) << bool(false) << keys << expected;
    }

    // enter a two digit valid hour (>12) in 24 h mode
    {
        QTestEventList keys;
        keys.addKeyClick( '1' );
        keys.addKeyClick( '5' );
        QTime expected( 15, 0, 0 );
        QTest::newRow( "data18" ) << bool(false) << keys << expected;
    }

    // enter a two digit valid hour (>20) in 24 h mode
    {
        QTestEventList keys;
        keys.addKeyClick( '2' );
        keys.addKeyClick( '1' );
        QTime expected( 21, 0, 0 );
        QTest::newRow( "data19" ) << bool(false) << keys << expected;
    }

    // enter a two digit invalid hour (>23) in 24 h mode
    {
        QTestEventList keys;
        keys.addKeyClick( '2' );
        keys.addKeyClick( '4' );
        QTime expected( 2, 0, 0 );
        QTest::newRow( "data20" ) << bool(false) << keys << expected;
    }

    // ***************** test the minutes ***************

    // use up/down keys to change the minutes in 12 hour mode
    { // test a valid value
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        for (uint i=0; i<2; i++)
            keys.addKeyClick( Qt::Key_Up );
        QTime expected( 11, 2, 0 );
        QTest::newRow( "data21" ) << bool(true) << keys << expected;
    }
    { // test a valid value
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        for (uint i=0; i<16; i++)
            keys.addKeyClick( Qt::Key_Up );
        QTime expected( 11, 16, 0 );
        QTest::newRow( "data22" ) << bool(true) << keys << expected;
    }
    { // test maximum value
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        for (uint i=0; i<59; i++)
            keys.addKeyClick( Qt::Key_Up );
        QTime expected( 11, 59, 0 );
        QTest::newRow( "data23" ) << bool(true) << keys << expected;
    }
    { // test 'overflow'
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        for (uint i=0; i<60; i++)
            keys.addKeyClick( Qt::Key_Up );
        QTime expected( 11, 0, 0 );
        QTest::newRow( "data24" ) << bool(true) << keys << expected;
    }
    { // test 'underflow'
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Down );
        QTime expected( 11, 59, 0 );
        QTest::newRow( "data25" ) << bool(true) << keys << expected;
    }
    { // test valid value
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        for (uint i=0; i<2; i++)
            keys.addKeyClick( Qt::Key_Down );
        QTime expected( 11, 58, 0 );
        QTest::newRow( "data26" ) << bool(true) << keys << expected;
    }

    // use up/down keys to change the minutes in 24 hour mode

    { // test a valid value
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        for (uint i=0; i<2; i++)
            keys.addKeyClick( Qt::Key_Up );
        QTime expected( 11, 2, 0 );
        QTest::newRow( "data27" ) << bool(false) << keys << expected;
    }
    { // test a valid value
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        for (uint i=0; i<16; i++)
            keys.addKeyClick( Qt::Key_Up );
        QTime expected( 11, 16, 0 );
        QTest::newRow( "data28" ) << bool(false) << keys << expected;
    }
    { // test maximum value
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        for (uint i=0; i<59; i++)
            keys.addKeyClick( Qt::Key_Up );
        QTime expected( 11, 59, 0 );
        QTest::newRow( "data29" ) << bool(false) << keys << expected;
    }
    { // test 'overflow'
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        for (uint i=0; i<60; i++)
            keys.addKeyClick( Qt::Key_Up );
        QTime expected( 11, 0, 0 );
        QTest::newRow( "data30" ) << bool(false) << keys << expected;
    }
    { // test 'underflow'
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Down );
        QTime expected( 11, 59, 0 );
        QTest::newRow( "data31" ) << bool(false) << keys << expected;
    }
    { // test valid value
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        for (uint i=0; i<2; i++)
            keys.addKeyClick( Qt::Key_Down );
        QTime expected( 11, 58, 0 );
        QTest::newRow( "data32" ) << bool(false) << keys << expected;
    }

    // enter a valid one digit minute in 12 h mode
    {
        QTestEventList keys;
        keys.addKeyClick(Qt::Key_Tab);
        keys.addKeyClick( '2' );
        QTime expected( 11, 2, 0 );
        QTest::newRow( "data33" ) << bool(true) << keys << expected;
    }

    // enter a valid two digit minutes in 12 h mode
    {
        QTestEventList keys;
        keys.addKeyClick(Qt::Key_Tab);
        keys.addKeyClick( '2' );
        keys.addKeyClick( '4' );
        QTime expected( 11, 24, 0 );
        QTest::newRow( "data34" ) << bool(true) << keys << expected;
    }

    // check the lower limit of the minutes in 12 h mode
    {
        QTestEventList keys;
        keys.addKeyClick(Qt::Key_Tab);
        keys.addKeyClick( '0' );
        QTime expected( 11, 0, 0 );
        QTest::newRow( "data35" ) << bool(true) << keys << expected;
    }

    // check the upper limit of the minutes in 12 h mode
    {
        QTestEventList keys;
        keys.addKeyClick(Qt::Key_Tab);
        keys.addKeyClick( '5' );
        keys.addKeyClick( '9' );
        QTime expected( 11, 59, 0 );
        QTest::newRow( "data36" ) << bool(true) << keys << expected;
    }

    // enter an invalid two digit minutes in 12 h mode
    {
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( '6' );
        keys.addKeyClick( '0' );
        QTime expected( 11, 6, 0 );
        QTest::newRow( "data37" ) << bool(true) << keys << expected;
    }

    // test minutes in 24 hour motestWidget-> Behaviour should be exactly the same

    // enter a valid one digit minute in 24 h mode
    {
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( '2' );
        QTime expected( 11, 2, 0 );
        QTest::newRow( "data38" ) << bool(false) << keys << expected;
    }

    // enter a valid two digit minutes in 24 h mode
    {
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( '2' );
        keys.addKeyClick( '4' );
        QTime expected( 11, 24, 0 );
        QTest::newRow( "data39" ) << bool(false) << keys << expected;
    }

    // check the lower limit of the minutes in 24 h mode
    {
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( '0' );
        QTime expected( 11, 0, 0 );
        QTest::newRow( "data40" ) << bool(false) << keys << expected;
    }

    // check the upper limit of the minutes in 24 h mode
    {
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( '5' );
        keys.addKeyClick( '9' );
        QTime expected( 11, 59, 0 );
        QTest::newRow( "data41" ) << bool(false) << keys << expected;
    }

    // enter an invalid two digit minutes in 24 h mode
    {
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( '6' );
        keys.addKeyClick( '0' );
        QTime expected( 11, 6, 0 );
        QTest::newRow( "data42" ) << bool(false) << keys << expected;
    }

    // ***************** test the seconds ***************

    // use up/down to edit the seconds...

    // use up/down keys to change the seconds in 12 hour mode
    { // test a valid value
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Tab );
        for (uint i=0; i<2; i++)
            keys.addKeyClick( Qt::Key_Up );
        QTime expected( 11, 0, 2 );
        QTest::newRow( "data43" ) << bool(true) << keys << expected;
    }
    { // test a valid value
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Tab );
        for (uint i=0; i<16; i++)
            keys.addKeyClick( Qt::Key_Up );
        QTime expected( 11, 0, 16 );
        QTest::newRow( "data44" ) << bool(true) << keys << expected;
    }
    { // test maximum value
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Tab );
        for (uint i=0; i<59; i++)
            keys.addKeyClick( Qt::Key_Up );
        QTime expected( 11, 0, 59 );
        QTest::newRow( "data45" ) << bool(true) << keys << expected;
    }
    { // test 'overflow'
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Tab );
        for (uint i=0; i<60; i++)
            keys.addKeyClick( Qt::Key_Up );
        QTime expected( 11, 0, 0 );
        QTest::newRow( "data46" ) << bool(true) << keys << expected;
    }
    { // test 'underflow'
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Down );
        QTime expected( 11, 0, 59 );
        QTest::newRow( "data47" ) << bool(true) << keys << expected;
    }
    { // test valid value
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Tab );
        for (uint i=0; i<2; i++)
            keys.addKeyClick( Qt::Key_Down );
        QTime expected( 11, 0, 58 );
        QTest::newRow( "data48" ) << bool(true) << keys << expected;
    }

    // use up/down keys to change the seconds in 24 hour mode

    { // test a valid value
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Tab );
        for (uint i=0; i<2; i++)
            keys.addKeyClick( Qt::Key_Up );
        QTime expected( 11, 0, 2 );
        QTest::newRow( "data49" ) << bool(false) << keys << expected;
    }
    { // test a valid value
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Tab );
        for (uint i=0; i<16; i++)
            keys.addKeyClick( Qt::Key_Up );
        QTime expected( 11, 0, 16 );
        QTest::newRow( "data50" ) << bool(false) << keys << expected;
    }
    { // test maximum value
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Tab );
        for (uint i=0; i<59; i++)
            keys.addKeyClick( Qt::Key_Up );
        QTime expected( 11, 0, 59 );
        QTest::newRow( "data51" ) << bool(false) << keys << expected;
    }
    { // test 'overflow'
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Tab );
        for (uint i=0; i<60; i++)
            keys.addKeyClick( Qt::Key_Up );
        QTime expected( 11, 0, 0 );
        QTest::newRow( "data52" ) << bool(false) << keys << expected;
    }
    { // test 'underflow'
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Down );
        QTime expected( 11, 0, 59 );
        QTest::newRow( "data53" ) << bool(false) << keys << expected;
    }
    { // test valid value
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Tab );
        for (uint i=0; i<2; i++)
            keys.addKeyClick( Qt::Key_Down );
        QTime expected( 11, 0, 58 );
        QTest::newRow( "data54" ) << bool(false) << keys << expected;
    }

    // enter a valid one digit second in 12 h mode
    {
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( '2' );
        QTime expected( 11, 0, 2 );
        QTest::newRow( "data55" ) << bool(true) << keys << expected;
    }

    // enter a valid two digit seconds in 12 h mode
    {
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( '2' );
        keys.addKeyClick( '4' );
        QTime expected( 11, 0, 24 );
        QTest::newRow( "data56" ) << bool(true) << keys << expected;
    }

    // check the lower limit of the seconds in 12 h mode
    {
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( '0' );
        QTime expected( 11, 0, 0 );
        QTest::newRow( "data57" ) << bool(true) << keys << expected;
    }

    // check the upper limit of the seconds in 12 h mode
    {
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( '5' );
        keys.addKeyClick( '9' );
        QTime expected( 11, 0, 59 );
        QTest::newRow( "data58" ) << bool(true) << keys << expected;
    }

    // enter an invalid two digit seconds in 12 h mode
    {
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( '6' );
        keys.addKeyClick( '0' );
        QTime expected( 11, 0, 6 );
        QTest::newRow( "data59" ) << bool(true) << keys << expected;
    }

    // test seconds in 24 hour mode. Behaviour should be exactly the same

    // enter a valid one digit minute in 24 h mode
    {
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( '2' );
        QTime expected( 11, 0, 2 );
        QTest::newRow( "data60" ) << bool(false) << keys << expected;
    }

    // enter a valid two digit seconds in 24 h mode
    {
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( '2' );
        keys.addKeyClick( '4' );
        QTime expected( 11, 0, 24 );
        QTest::newRow( "data61" ) << bool(false) << keys << expected;
    }

    // check the lower limit of the seconds in 24 h mode
    {
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( '0' );
        QTime expected( 11, 0, 0 );
        QTest::newRow( "data62" ) << bool(false) << keys << expected;
    }

    // check the upper limit of the seconds in 24 h mode
    {
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( '5' );
        keys.addKeyClick( '9' );
        QTime expected( 11, 0, 59 );
        QTest::newRow( "data63" ) << bool(false) << keys << expected;
    }

    // enter an invalid two digit seconds in 24 h mode
    {
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( '6' );
        keys.addKeyClick( '0' );
        QTime expected( 11, 0, 6 );
        QTest::newRow( "data64" ) << bool(false) << keys << expected;
    }

    // Test the AMPM indicator
    {
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Up );
        QTime expected( 23, 0, 0 );
        QTest::newRow( "data65" ) << bool(true) << keys << expected;
    }
    // Test the AMPM indicator
    {
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Down );
        QTime expected( 23, 0, 0 );
        QTest::newRow( "data66" ) << bool(true) << keys << expected;
    }
    // Test the AMPM indicator
    {
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Down );
        keys.addKeyClick( Qt::Key_Down );
        QTime expected( 11, 0, 0 );
        QTest::newRow( "data67" ) << bool(true) << keys << expected;
    }
    // Test the AMPM indicator
    {
        QTestEventList keys;
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Tab );
        keys.addKeyClick( Qt::Key_Up );
        keys.addKeyClick( Qt::Key_Down );
        QTime expected( 11, 0, 0 );
        QTest::newRow( "data68" ) << bool(true) << keys << expected;
    }
}

void tst_QDateTimeEdit::userKeyPress_Time()
{
    QFETCH(bool, ampm);
    QFETCH(QTestEventList, keys);
    QFETCH(QTime, expected_time);

    if (ampm)
        testWidget->setDisplayFormat("hh:mm:ss ap");
    else
        testWidget->setDisplayFormat("hh:mm:ss");

    testWidget->setTime(QTime(11, 0, 0));
    testWidget->setFocus();

    testWidget->setWrapping(true);

    QTest::keyClick(testWidget, Qt::Key_Enter); // Make sure the first section is now focused
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("11"));
    keys.simulate(testWidget);
    QTest::keyClick(testWidget, Qt::Key_Enter);

    QCOMPARE(testWidget->time(), expected_time);
}

void tst_QDateTimeEdit::wrappingDate_data()
{
    QTest::addColumn<bool>("startWithMin");
    QTest::addColumn<QDate>("minimumDate");
    QTest::addColumn<QDate>("maximumDate");
    QTest::addColumn<uint>("section");
    QTest::addColumn<QDate>("newDate");

    QTest::newRow("data0") << false << QDate(1999, 1, 1) << QDate(1999, 1, 31) << (uint)QDateTimeEdit::DaySection
                        << QDate(1999, 1, 1);
    QTest::newRow("data1") << true << QDate(1999, 1, 1) << QDate(1999, 1, 31) << (uint)QDateTimeEdit::DaySection
                        << QDate(1999, 1, 31);
    QTest::newRow("data2") << false << QDate(1999, 1, 1) << QDate(1999, 1, 31) << (uint)QDateTimeEdit::MonthSection
                        << QDate(1999, 1, 31);
    QTest::newRow("data3") << true << QDate(1999, 1, 1) << QDate(1999, 1, 31) << (uint)QDateTimeEdit::MonthSection
                        << QDate(1999, 1, 1);
    QTest::newRow("data4") << false << QDate(1999, 1, 1) << QDate(1999, 1, 31) << (uint)QDateTimeEdit::YearSection
                        << QDate(1999, 1, 31);
    QTest::newRow("data5") << true << QDate(1999, 1, 1) << QDate(1999, 1, 31) << (uint)QDateTimeEdit::YearSection
                        << QDate(1999, 1, 1);
    QTest::newRow("data6") << false << QDate(1999, 1, 1) << QDate(2000, 1, 31) << (uint)QDateTimeEdit::DaySection
                        << QDate(2000, 1, 1);
    QTest::newRow("data7") << true << QDate(1999, 1, 1) << QDate(2000, 1, 31) << (uint)QDateTimeEdit::DaySection
                        << QDate(1999, 1, 31);
    QTest::newRow("data8") << false << QDate(1999, 1, 1) << QDate(2000, 1, 31) << (uint)QDateTimeEdit::MonthSection
                        << QDate(2000, 1, 31);
    QTest::newRow("data9") << true << QDate(1999, 1, 1) << QDate(2000, 1, 31) << (uint)QDateTimeEdit::MonthSection
                        << QDate(1999, 12, 1);
    QTest::newRow("data10") << false << QDate(1999, 1, 1) << QDate(2000, 1, 31) << (uint)QDateTimeEdit::YearSection
                         << QDate(1999, 1, 31);
    QTest::newRow("data11") << true << QDate(1999, 1, 1) << QDate(2000, 1, 31) << (uint)QDateTimeEdit::YearSection
                         << QDate(2000, 1, 1);
}


void tst_QDateTimeEdit::wrappingDate()
{
    QFETCH(bool, startWithMin);
    QFETCH(QDate, minimumDate);
    QFETCH(QDate, maximumDate);
    QFETCH(uint, section);
    QFETCH(QDate, newDate);

    testWidget->setDisplayFormat("dd/MM/yyyy");
    testWidget->setMinimumDate(minimumDate);
    testWidget->setMaximumDate(maximumDate);
    testWidget->setWrapping(true);
    testWidget->setCurrentSection((QDateTimeEdit::Section)section);

    if (startWithMin) {
        testWidget->setDate(minimumDate);
        QTest::keyClick(testWidget, Qt::Key_Down);
    } else {
        testWidget->setDate(maximumDate);
        QTest::keyClick(testWidget, Qt::Key_Up);
    }
    if (testWidget->currentSection() == QDateTimeEdit::MonthSection)
        QCOMPARE(testWidget->date(), newDate);
}

void tst_QDateTimeEdit::dateSignalChecking_data()
{
    QTest::addColumn<QDate>("originalDate");
    QTest::addColumn<QDate>("newDate");
    QTest::addColumn<int>("timesEmitted");

    QTest::newRow("data0") << QDate(2004, 06, 22) << QDate(2004, 07, 23) << 1;
    QTest::newRow("data1") << QDate(2004, 06, 22) << QDate(2004, 06, 22) << 0;
}

void tst_QDateTimeEdit::dateSignalChecking()
{
    QFETCH(QDate, originalDate);
    QFETCH(QDate, newDate);
    QFETCH(int, timesEmitted);

    testWidget->setDate(originalDate);

    QSignalSpy dateSpy(testWidget, SIGNAL(dateChanged(const QDate &)));
    QSignalSpy dateTimeSpy(testWidget, SIGNAL(dateTimeChanged(const QDateTime &)));
    QSignalSpy timeSpy(testWidget, SIGNAL(timeChanged(const QTime &)));

    testWidget->setDate(newDate);
    QCOMPARE(dateSpy.count(), timesEmitted);

    if (timesEmitted > 0) {
        QList<QVariant> list = dateSpy.takeFirst();
        QDate d;
        d = qVariantValue<QDate>(list.at(0));
        QCOMPARE(d, newDate);
    }
    QCOMPARE(dateTimeSpy.count(), timesEmitted);
    QCOMPARE(timeSpy.count(), 0);
}

void tst_QDateTimeEdit::timeSignalChecking_data()
{
    QTest::addColumn<QTime>("originalTime");
    QTest::addColumn<QTime>("newTime");
    QTest::addColumn<int>("timesEmitted");

    QTest::newRow("data0") << QTime(15, 55, 00) << QTime(15, 17, 12) << 1;
    QTest::newRow("data1") << QTime(15, 55, 00) << QTime(15, 55, 00) << 0;
}

void tst_QDateTimeEdit::timeSignalChecking()
{
    QFETCH(QTime, originalTime);
    QFETCH(QTime, newTime);
    QFETCH(int, timesEmitted);

    testWidget->setTime(originalTime);

    testWidget->setDisplayFormat("hh:mm:ss");
    QSignalSpy dateSpy(testWidget, SIGNAL(dateChanged(const QDate &)));
    QSignalSpy dateTimeSpy(testWidget, SIGNAL(dateTimeChanged(const QDateTime &)));
    QSignalSpy timeSpy(testWidget, SIGNAL(timeChanged(const QTime &)));

    testWidget->setTime(newTime);
    QCOMPARE(timeSpy.count(), timesEmitted);

    if (timesEmitted > 0) {
        QList<QVariant> list = timeSpy.takeFirst();
        QTime t;
        t = qVariantValue<QTime>(list.at(0));
        QCOMPARE(t, newTime);
    }
    QCOMPARE(dateTimeSpy.count(), timesEmitted);
    QCOMPARE(dateSpy.count(), 0);
}

void tst_QDateTimeEdit::dateTimeSignalChecking_data()
{
    QTest::addColumn<QDateTime>("originalDateTime");
    QTest::addColumn<QDateTime>("newDateTime");
    QTest::addColumn<int>("timesDateEmitted");
    QTest::addColumn<int>("timesTimeEmitted");
    QTest::addColumn<int>("timesDateTimeEmitted");

    QTest::newRow("data0") << QDateTime(QDate(2004, 6, 22), QTime(15, 55, 0))
                        << QDateTime(QDate(2004, 7, 23), QTime(15, 17, 12))
                        << 1 << 1 << 1;
    QTest::newRow("data1") << QDateTime(QDate(2004, 6, 22), QTime(15, 55, 0))
                        << QDateTime(QDate(2004, 6, 22), QTime(15, 17, 12))
                        << 0 << 1 << 1;
    QTest::newRow("data2") << QDateTime(QDate(2004, 6, 22), QTime(15, 55, 0))
                        << QDateTime(QDate(2004, 7, 23), QTime(15, 55, 0))
                        << 1 << 0 << 1;
    QTest::newRow("data3") << QDateTime(QDate(2004, 6, 22), QTime(15, 55, 0))
                        << QDateTime(QDate(2004, 6, 22), QTime(15, 55, 0))
                        << 0 << 0 << 0;
}

void tst_QDateTimeEdit::dateTimeSignalChecking()
{
    QFETCH(QDateTime, originalDateTime);
    QFETCH(QDateTime, newDateTime);
    QFETCH(int, timesDateEmitted);
    QFETCH(int, timesTimeEmitted);
    QFETCH(int, timesDateTimeEmitted);

    testWidget->setDisplayFormat("dd/MM/yyyy hh:mm:ss");
    testWidget->setDateTime(originalDateTime);

    QSignalSpy dateSpy(testWidget, SIGNAL(dateChanged(const QDate &)));
    QSignalSpy timeSpy(testWidget, SIGNAL(timeChanged(const QTime &)));
    QSignalSpy dateTimeSpy(testWidget, SIGNAL(dateTimeChanged(const QDateTime &)));

    testWidget->setDateTime(newDateTime);
    QCOMPARE(dateSpy.count(), timesDateEmitted);
    if (timesDateEmitted > 0) {
        QCOMPARE(timesDateEmitted, 1);
        QList<QVariant> list = dateSpy.takeFirst();
        QDate d;
        d = qVariantValue<QDate>(list.at(0));
        QCOMPARE(d, newDateTime.date());
    }
    QCOMPARE(timeSpy.count(), timesTimeEmitted);
    if (timesTimeEmitted > 0) {
        QList<QVariant> list = timeSpy.takeFirst();
        QTime t;
        t = qVariantValue<QTime>(list.at(0));
        QCOMPARE(t, newDateTime.time());
    }
    QCOMPARE(dateTimeSpy.count(), timesDateTimeEmitted);
    if (timesDateTimeEmitted > 0) {
        QList<QVariant> list = dateTimeSpy.takeFirst();
        QDateTime dt;
        dt = qVariantValue<QDateTime>(list.at(0));
        QCOMPARE(dt, newDateTime);
    }
}


void tst_QDateTimeEdit::sectionText_data()
{
    QTest::addColumn<QString>("format");
    QTest::addColumn<QDateTime>("dateTime");
    QTest::addColumn<uint>("section");
    QTest::addColumn<QString>("sectionText");

    QTest::newRow("data0") << QString("dd/MM/yyyy hh:mm:ss zzz ap")
                        << QDateTime(QDate(2004, 6, 22), QTime(15, 55, 3, 789))
                        << (uint)QDateTimeEdit::NoSection << QString();
    QTest::newRow("data1") << QString("dd/MM/yyyy hh:mm:ss zzz ap")
                        << QDateTime(QDate(2004, 6, 22), QTime(15, 55, 3, 789))
                        << (uint)QDateTimeEdit::AmPmSection << QString("pm");
    QTest::newRow("data2") << QString("dd/MM/yyyy hh:mm:ss zzz ap")
                        << QDateTime(QDate(2004, 6, 22), QTime(15, 55, 3, 789))
                        << (uint)QDateTimeEdit::MSecSection << QString("789");
    QTest::newRow("data3") << QString("dd/MM/yyyy hh:mm:ss zzz ap")
                        << QDateTime(QDate(2004, 6, 22), QTime(15, 55, 3, 789))
                        << (uint)QDateTimeEdit::SecondSection << QString("03");
    QTest::newRow("data4") << QString("dd/MM/yyyy hh:mm:ss zzz ap")
                        << QDateTime(QDate(2004, 6, 22), QTime(15, 55, 3, 789))
                        << (uint)QDateTimeEdit::MinuteSection << QString("55");
    QTest::newRow("data5") << QString("dd/MM/yyyy hh:mm:ss zzz ap")
                        << QDateTime(QDate(2004, 6, 22), QTime(15, 55, 3, 789))
                        << (uint)QDateTimeEdit::HourSection << QString("03");
    QTest::newRow("data6") << QString("dd/MM/yyyy hh:mm:ss zzz")
                        << QDateTime(QDate(2004, 6, 22), QTime(15, 55, 3, 789))
                        << (uint)QDateTimeEdit::HourSection << QString("15");
    QTest::newRow("data7") << QString("dd/MM/yyyy hh:mm:ss zzz ap")
                        << QDateTime(QDate(2004, 6, 22), QTime(15, 55, 3, 789))
                        << (uint)QDateTimeEdit::DaySection << QString("22");
    QTest::newRow("data8") << QString("dd/MM/yyyy hh:mm:ss zzz ap")
                        << QDateTime(QDate(2004, 6, 22), QTime(15, 55, 3, 789))
                        << (uint)QDateTimeEdit::MonthSection << QString("06");
    QTest::newRow("data9") << QString("dd/MM/yyyy hh:mm:ss zzz ap")
                        << QDateTime(QDate(2004, 6, 22), QTime(15, 55, 3, 789))
                        << (uint)QDateTimeEdit::YearSection << QString("2004");
    QTest::newRow("data10") << QString("dd/MM/yyyy hh:mm:ss zzz AP")
                         << QDateTime(QDate(2004, 6, 22), QTime(15, 55, 3, 789))
                         << (uint)QDateTimeEdit::AmPmSection << QString("PM");
    QTest::newRow("data11") << QString("dd/MM/yyyy hh:mm:ss ap")
                         << QDateTime(QDate(2004, 6, 22), QTime(15, 55, 3, 789))
                         << (uint)QDateTimeEdit::MSecSection << QString();
}

void tst_QDateTimeEdit::sectionText()
{
    QFETCH(QString, format);
    QFETCH(QDateTime, dateTime);
    QFETCH(uint, section);
    QFETCH(QString, sectionText);

    testWidget->setDisplayFormat(format);
    testWidget->setDateTime(dateTime);
    QCOMPARE(testWidget->sectionText((QDateTimeEdit::Section)section), sectionText);
//    QApplication::setLayoutDirection(Qt::RightToLeft);
//    testWidget->setDisplayFormat(format);
//    QCOMPARE(format, testWidget->displayFormat());
//     testWidget->setDateTime(dateTime);
//     QCOMPARE(testWidget->sectionText((QDateTimeEdit::Section)section), sectionText);
//     QApplication::setLayoutDirection(Qt::LeftToRight);
}

void tst_QDateTimeEdit::mousePress()
{
    testWidget->setDate(QDate(2004, 6, 23));
    testWidget->setCurrentSection(QDateTimeEdit::YearSection);
    QCOMPARE(testWidget->currentSection(), QDateTimeEdit::YearSection);

    // Ask the SC_SpinBoxUp button location from style
    QStyleOptionSpinBox so;
    so.rect = testWidget->rect();
    QRect rectUp = testWidget->style()->subControlRect(QStyle::CC_SpinBox, &so, QStyle::SC_SpinBoxUp, testWidget);

    // Send mouseClick to center of SC_SpinBoxUp
    QTest::mouseClick(testWidget, Qt::LeftButton, 0, rectUp.center());
    QCOMPARE(testWidget->date().year(), 2005);

}

void tst_QDateTimeEdit::stepHourAMPM_data()
{
    QTest::addColumn<QString>("format");
    QTest::addColumn<KeyList>("keys");
    QTest::addColumn<TimeList>("expected");
    QTest::addColumn<QTime>("start");
    QTest::addColumn<QTime>("min");
    QTest::addColumn<QTime>("max");

    {
        KeyList keys;
        TimeList expected;
        keys << Qt::Key_Up;
        expected << QTime(1, 0, 0);
        keys << Qt::Key_Up;
        expected << QTime(2, 0, 0);
        keys << Qt::Key_Up;
        expected << QTime(3, 0, 0);
        keys << Qt::Key_Up;
        expected << QTime(4, 0, 0);
        keys << Qt::Key_Up;
        expected << QTime(5, 0, 0);
        keys << Qt::Key_Up;
        expected << QTime(6, 0, 0);
        keys << Qt::Key_Up;
        expected << QTime(7, 0, 0);
        keys << Qt::Key_Up;
        expected << QTime(8, 0, 0);
        keys << Qt::Key_Up;
        expected << QTime(9, 0, 0);
        keys << Qt::Key_Up;
        expected << QTime(10, 0, 0);
        keys << Qt::Key_Up;
        expected << QTime(11, 0, 0);
        keys << Qt::Key_Up;
        expected << QTime(12, 0, 0);
        keys << Qt::Key_Up;
        expected << QTime(13, 0, 0);
        keys << Qt::Key_Up;
        expected << QTime(14, 0, 0);
        keys << Qt::Key_Up;
        expected << QTime(15, 0, 0);
        keys << Qt::Key_Up;
        expected << QTime(16, 0, 0);
        keys << Qt::Key_Up;
        expected << QTime(17, 0, 0);
        keys << Qt::Key_Up;
        expected << QTime(18, 0, 0);
        keys << Qt::Key_Up;
        expected << QTime(19, 0, 0);
        keys << Qt::Key_Up;
        expected << QTime(20, 0, 0);
        keys << Qt::Key_Up;
        expected << QTime(21, 0, 0);
        keys << Qt::Key_Up;
        expected << QTime(22, 0, 0);
        keys << Qt::Key_Up;
        expected << QTime(23, 0, 0);
        keys << Qt::Key_Down;
        expected << QTime(22, 0, 0);
        keys << Qt::Key_Down;
        expected << QTime(21, 0, 0);
        keys << Qt::Key_Down;
        expected << QTime(20, 0, 0);
        keys << Qt::Key_Down;
        expected << QTime(19, 0, 0);
        keys << Qt::Key_Down;
        expected << QTime(18, 0, 0);
        keys << Qt::Key_Down;
        expected << QTime(17, 0, 0);
        keys << Qt::Key_Down;
        expected << QTime(16, 0, 0);
        keys << Qt::Key_Down;
        expected << QTime(15, 0, 0);
        keys << Qt::Key_Down;
        expected << QTime(14, 0, 0);
        keys << Qt::Key_Down;
        expected << QTime(13, 0, 0);
        keys << Qt::Key_Down;
        expected << QTime(12, 0, 0);
        keys << Qt::Key_Down;
        expected << QTime(11, 0, 0);
        keys << Qt::Key_Down;
        expected << QTime(10, 0, 0);
        keys << Qt::Key_Down;
        expected << QTime(9, 0, 0);
        keys << Qt::Key_Down;
        expected << QTime(8, 0, 0);
        keys << Qt::Key_Down;
        expected << QTime(7, 0, 0);
        keys << Qt::Key_Down;
        expected << QTime(6, 0, 0);
        keys << Qt::Key_Down;
        expected << QTime(5, 0, 0);
        keys << Qt::Key_Down;
        expected << QTime(4, 0, 0);
        keys << Qt::Key_Down;
        expected << QTime(3, 0, 0);
        keys << Qt::Key_Down;
        expected << QTime(2, 0, 0);
        keys << Qt::Key_Down;
        expected << QTime(1, 0, 0);
        keys << Qt::Key_Down;
        expected << QTime(0, 0, 0);

        QTest::newRow("hh 1") << QString("hh") << keys << expected << QTime(0, 0)
                              << QTime(0, 0) << QTime(23, 59, 59);
        QTest::newRow("hh:ap 1") << QString("hh:ap") << keys << expected
                                 << QTime(0, 0) << QTime(0, 0)
                                 << QTime(23, 59, 59);

        QTest::newRow("HH:ap 2") << QString("HH:ap") << keys << expected
                                 << QTime(0, 0) << QTime(0, 0)
                                 << QTime(23, 59, 59);

    }
    {
        KeyList keys;
        TimeList expected;
        keys << Qt::Key_Down;
        expected << QTime(2, 0, 0);
        QTest::newRow("hh 2") << QString("hh") << keys << expected << QTime(0, 0) << QTime(2, 0, 0) << QTime(23, 59, 59);
        QTest::newRow("hh:ap 2") << QString("hh:ap") << keys << expected << QTime(0, 0) << QTime(2, 0, 0) << QTime(23, 59, 59);
    }
    {
        KeyList keys;
        TimeList expected;
        keys << Qt::Key_Up;
        expected << QTime(23, 0, 0);
        keys << Qt::Key_Up;
        expected << QTime(23, 0, 0);
        QTest::newRow("hh 3") << QString("hh") << keys << expected << QTime(0, 0) << QTime(22, 0, 0)
                              << QTime(23, 59, 59);
        QTest::newRow("hh:ap 3") << QString("hh:ap") << keys << expected << QTime(0, 0)
                                 << QTime(22, 0, 0) << QTime(23, 59, 59);
    }
    {
        KeyList keys;
        TimeList expected;
        keys << Qt::Key_Up;
        expected << QTime(15, 31, 0);
        QTest::newRow("hh:mm:ap 3") << QString("hh:mm:ap") << keys << expected << QTime(15, 31, 0)
                                    << QTime(9, 0, 0) << QTime(16, 0, 0);
        QTest::newRow("hh:mm 3") << QString("hh:mm") << keys << expected << QTime(15, 31, 0)
                                 << QTime(9, 0, 0) << QTime(16, 0, 0);
    }
}

void tst_QDateTimeEdit::stepHourAMPM()
{
    QFETCH(QString, format);
    QFETCH(KeyList, keys);
    QFETCH(TimeList, expected);
    QFETCH(QTime, start);
    QFETCH(QTime, min);
    QFETCH(QTime, max);


    testWidget->setDisplayFormat(format);
    testWidget->setTime(start);
    testWidget->setMinimumTime(min);
    testWidget->setMaximumTime(max);
    if (keys.size() != expected.size()) {
        qWarning("%s:%d Test broken", __FILE__, __LINE__);
        QCOMPARE(keys.size(), expected.size());
    }

    for (int i=0; i<keys.size(); ++i) {
        QTest::keyClick(testWidget, keys.at(i));
        QCOMPARE(testWidget->time(), expected.at(i));
    }
}


void tst_QDateTimeEdit::displayedSections_data()
{
    QTest::addColumn<QString>("format");
    QTest::addColumn<uint>("section");

    QTest::newRow("data0") << QString("dd/MM/yyyy hh:mm:ss zzz ap")
                        << (uint)(QDateTimeEdit::DaySection | QDateTimeEdit::MonthSection
                                  | QDateTimeEdit::YearSection | QDateTimeEdit::HourSection
                                  | QDateTimeEdit::MinuteSection | QDateTimeEdit::SecondSection
                                  | QDateTimeEdit::MSecSection | QDateTimeEdit::AmPmSection);
    QTest::newRow("data1") << QString("dd/yyyy hh:mm:ss zzz ap")
                        << (uint)(QDateTimeEdit::DaySection
                                  | QDateTimeEdit::YearSection | QDateTimeEdit::HourSection
                                  | QDateTimeEdit::MinuteSection | QDateTimeEdit::SecondSection
                                  | QDateTimeEdit::MSecSection | QDateTimeEdit::AmPmSection);
    QTest::newRow("data2") << QString("dd/MM/yyyy mm zzz ap")
                        << (uint)(QDateTimeEdit::DaySection | QDateTimeEdit::MonthSection
                                  | QDateTimeEdit::YearSection
                                  | QDateTimeEdit::MinuteSection
                                  | QDateTimeEdit::MSecSection | QDateTimeEdit::AmPmSection);
    QTest::newRow("data3") << QString("dd/MM/yyyy")
                        << (uint)(QDateTimeEdit::DaySection | QDateTimeEdit::MonthSection
                                  | QDateTimeEdit::YearSection);
    QTest::newRow("data4") << QString("hh:mm:ss zzz ap")
                        << (uint)(QDateTimeEdit::HourSection
                                  | QDateTimeEdit::MinuteSection | QDateTimeEdit::SecondSection
                                  | QDateTimeEdit::MSecSection | QDateTimeEdit::AmPmSection);
    QTest::newRow("data5") << QString("dd ap")
                        << (uint)(QDateTimeEdit::DaySection | QDateTimeEdit::AmPmSection);
    QTest::newRow("data6") << QString("zzz")
                        << (uint)QDateTimeEdit::MSecSection;
}

void tst_QDateTimeEdit::displayedSections()
{
    QFETCH(QString, format);
    QFETCH(uint, section);

    testWidget->setDisplayFormat(format);
    QVERIFY((QDateTimeEdit::Section)section == testWidget->displayedSections());
}

void tst_QDateTimeEdit::currentSection_data()
{
    QTest::addColumn<QString>("format");
    QTest::addColumn<uint>("section");
    QTest::addColumn<uint>("currentSection");

    // First is deliberate, this way we can make sure that it is not reset by specifying no section.
    QTest::newRow("data0") << QString("dd/MM/yyyy hh:mm:ss zzz ap")
                        << (uint)QDateTimeEdit::NoSection << (uint)QDateTimeEdit::YearSection;
    QTest::newRow("data1") << QString("dd/MM/yyyy hh:mm:ss zzz ap")
                        << (uint)QDateTimeEdit::AmPmSection << (uint)QDateTimeEdit::AmPmSection;
    QTest::newRow("data2") << QString("dd/MM/yyyy hh:mm:ss zzz ap")
                        << (uint)QDateTimeEdit::MSecSection << (uint)QDateTimeEdit::MSecSection;
    QTest::newRow("data3") << QString("dd/MM/yyyy hh:mm:ss zzz ap")
                        << (uint)QDateTimeEdit::SecondSection << (uint)QDateTimeEdit::SecondSection;
    QTest::newRow("data4") << QString("dd/MM/yyyy hh:mm:ss zzz ap")
                        << (uint)QDateTimeEdit::MinuteSection << (uint)QDateTimeEdit::MinuteSection;
    QTest::newRow("data5") << QString("dd/MM/yyyy hh:mm:ss zzz ap")
                        << (uint)QDateTimeEdit::HourSection << (uint)QDateTimeEdit::HourSection;
    QTest::newRow("data6") << QString("dd/MM/yyyy hh:mm:ss zzz ap")
                        << (uint)QDateTimeEdit::DaySection << (uint)QDateTimeEdit::DaySection;
    QTest::newRow("data7") << QString("dd/MM/yyyy hh:mm:ss zzz ap")
                        << (uint)QDateTimeEdit::MonthSection << (uint)QDateTimeEdit::MonthSection;
    QTest::newRow("data8") << QString("dd/MM/yyyy hh:mm:ss zzz ap")
                        << (uint)QDateTimeEdit::YearSection << (uint)QDateTimeEdit::YearSection;
    QTest::newRow("data9") << QString("dd/MM/yyyy hh:mm:ss zzz AP")
                        << (uint)QDateTimeEdit::AmPmSection << (uint)QDateTimeEdit::AmPmSection;
    QTest::newRow("data10") << QString("dd/MM/yyyy hh:mm:ss ap")
                         << (uint)QDateTimeEdit::MSecSection << (uint)QDateTimeEdit::DaySection;
}

void tst_QDateTimeEdit::currentSection()
{
    QFETCH(QString, format);
    QFETCH(uint, section);
    QFETCH(uint, currentSection);

    testWidget->setDisplayFormat(format);
    if ((QDateTimeEdit::Section)section == QDateTimeEdit::NoSection)
        testWidget->setCurrentSection(QDateTimeEdit::YearSection); // Ensure it's not reset (see above)
    testWidget->setCurrentSection((QDateTimeEdit::Section)section);
    QVERIFY((QDateTimeEdit::Section)currentSection == testWidget->currentSection());
}

void tst_QDateTimeEdit::readOnly()
{
    testWidget->hide();
    QDateTimeEdit dt(QDate(2000, 2, 1));
    dt.setDisplayFormat("yyyy.MM.dd");
    dt.show();
    dt.setCurrentSection(QDateTimeEdit::DaySection);
    QTest::keyClick(&dt, Qt::Key_Up);
    QCOMPARE(dt.date(), QDate(2000, 2, 2));
    dt.setReadOnly(true);
    QTest::keyClick(&dt, Qt::Key_Up);
    QCOMPARE(dt.date(), QDate(2000, 2, 2));
    dt.stepBy(1); // stepBy should still work
    QCOMPARE(dt.date(), QDate(2000, 2, 3));
    dt.setReadOnly(false);
    QTest::keyClick(&dt, Qt::Key_Up);
    QCOMPARE(dt.date(), QDate(2000, 2, 4));
}

void tst_QDateTimeEdit::weirdCase()
{
    testWidget->lineEdit()->setCursorPosition(0);
    testWidget->setDateRange(QDate(2005, 1, 1), QDate(2010, 12, 31));
    testWidget->setDisplayFormat("dd//MM//yyyy");
    testWidget->setDate(testWidget->minimumDate());
    QTest::keyClick(testWidget, Qt::Key_Left);
    QVERIFY(!testWidget->lineEdit()->hasSelectedText());
    QCOMPARE(testWidget->lineEdit()->cursorPosition(), 0);
    QTest::keyClick(testWidget, Qt::Key_Right);
    QTest::keyClick(testWidget, Qt::Key_Right);
    QTest::keyClick(testWidget, Qt::Key_Right);
    QTest::keyClick(testWidget, Qt::Key_Right);
    QTest::keyClick(testWidget, Qt::Key_Right);
    QTest::keyClick(testWidget, Qt::Key_Right);
    QVERIFY(!testWidget->lineEdit()->hasSelectedText());
    QCOMPARE(testWidget->lineEdit()->cursorPosition(), 8);

    QTest::keyClick(testWidget, Qt::Key_Delete);
    QCOMPARE(testWidget->text(), QString("01//01//005"));
    QTest::keyClick(testWidget, Qt::Key_4);
    QCOMPARE(testWidget->text(), QString("01//01//005"));
}

void tst_QDateTimeEdit::newCase()
{
    if (QDate::shortMonthName(6) != "Jun" || QDate::shortMonthName(7) != "Jul" ||
        QDate::longMonthName(6) != "June" || QDate::longMonthName(7) != "July")
        QSKIP("This test only works in English", SkipAll);

    testWidget->setDisplayFormat("MMMM'a'MbMMMcMM");
    testWidget->setDate(QDate(2005, 6, 1));
    QCOMPARE(testWidget->text(), QString("Junea6bJunc06"));
#ifdef Q_WS_MAC
    QTest::keyClick(testWidget, Qt::Key_Left, Qt::ControlModifier);
#else
    QTest::keyClick(testWidget, Qt::Key_Home);
#endif
    QTest::keyClick(testWidget, Qt::Key_Up);
    QCOMPARE(testWidget->text(), QString("Julya7bJulc07"));
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("July"));
#ifdef Q_WS_MAC
    QTest::keyClick(testWidget, Qt::Key_Left, Qt::ControlModifier);
#else
    QTest::keyClick(testWidget, Qt::Key_Home);
#endif
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString());
    QTest::keyClick(testWidget, Qt::Key_Right);
    QTest::keyClick(testWidget, Qt::Key_Right);
    QTest::keyClick(testWidget, Qt::Key_Right);
    QTest::keyClick(testWidget, Qt::Key_Delete);
    QTest::keyClick(testWidget, Qt::Key_Left);


    QCOMPARE(testWidget->text(), QString("Jula7bJulc07"));
    QTest::keyClick(testWidget, Qt::Key_Delete);
    QCOMPARE(testWidget->text(), QString("Jua7bJulc07"));
    QTest::keyClick(testWidget, Qt::Key_N);
    QCOMPARE(testWidget->text(), QString("Juna7bJulc07"));
    QTest::keyClick(testWidget, Qt::Key_E);
    QCOMPARE(testWidget->text(), QString("Junea6bJunc06"));
}

void tst_QDateTimeEdit::newCase2()
{
    testWidget->setDisplayFormat("MMMM yyyy-MM-dd MMMM");
    testWidget->setDate(QDate(2005, 8, 8));
    QTest::keyClick(testWidget, Qt::Key_Return);
    QTest::keyClick(testWidget, Qt::Key_Backspace);
    QCOMPARE(testWidget->text(), QString(" 2005-08-08 ") + QDate::longMonthName(8));
}

void tst_QDateTimeEdit::newCase3()
{
    if (!QDate::longMonthName(1).startsWith("Januar"))
        QSKIP("This test does not work in this locale", SkipAll);

    testWidget->setDisplayFormat("dd MMMM yyyy");
    testWidget->setDate(QDate(2000, 1, 1));
    testWidget->setGeometry(QRect(QPoint(0, 0), testWidget->sizeHint()));
    testWidget->setCurrentSection(QDateTimeEdit::MonthSection);
    QTest::keyClick(testWidget, Qt::Key_Return);
    QTest::keyClick(testWidget, Qt::Key_J);
    QCOMPARE(testWidget->lineEdit()->displayText(), QString("01 J 2000"));
    QCOMPARE(testWidget->lineEdit()->cursorPosition(), 4);
    QTest::keyClick(testWidget, Qt::Key_A);
    QTest::keyClick(testWidget, Qt::Key_N);
    QTest::keyClick(testWidget, Qt::Key_U);
    QTest::keyClick(testWidget, Qt::Key_A);
    QTest::keyClick(testWidget, Qt::Key_R);
}


void tst_QDateTimeEdit::cursorPos()
{
    if (QDate::longMonthName(1) != "January")
        QSKIP("This test only works in English", SkipAll);

    testWidget->setDisplayFormat("dd MMMM yyyy");
    //testWidget->setGeometry(0, 0, 200, 200);
    testWidget->setCurrentSection(QDateTimeEdit::MonthSection);
    QTest::keyClick(testWidget, Qt::Key_Return);
    QCOMPARE(testWidget->lineEdit()->cursorPosition(), 10);
    QTest::keyClick(testWidget, Qt::Key_J);
    QTest::keyClick(testWidget, Qt::Key_A);
    QTest::keyClick(testWidget, Qt::Key_N);
    QTest::keyClick(testWidget, Qt::Key_U);
    QTest::keyClick(testWidget, Qt::Key_A);
    QTest::keyClick(testWidget, Qt::Key_R);
    //QCursor::setPos(20, 20);
    //QEventLoop l;
    //l.exec();
    QTest::keyClick(testWidget, Qt::Key_Y);
    QCOMPARE(testWidget->lineEdit()->cursorPosition(), 11);
#ifdef Q_WS_MAC
    QTest::keyClick(testWidget, Qt::Key_Left, Qt::ControlModifier);
#else
    QTest::keyClick(testWidget, Qt::Key_Home);
#endif
    QTest::keyClick(testWidget, Qt::Key_Return);
    QTest::keyClick(testWidget, Qt::Key_3);
    QTest::keyClick(testWidget, Qt::Key_1);
    QCOMPARE(testWidget->lineEdit()->cursorPosition(), 3);
}

void tst_QDateTimeEdit::newCase4()
{
    testWidget->setDisplayFormat("hh:mm");
    testWidget->setMinimumTime(QTime(3, 3, 0));
    QTest::keyClick(testWidget, Qt::Key_Return);
    QTest::keyClick(testWidget, Qt::Key_0);
    QCOMPARE(testWidget->lineEdit()->displayText(), QString("0:03"));
    QTest::keyClick(testWidget, Qt::Key_2);
    QCOMPARE(testWidget->lineEdit()->displayText(), QString("0:03"));
    QTest::keyClick(testWidget, Qt::Key_4);
    QCOMPARE(testWidget->lineEdit()->displayText(), QString("04:03"));
}

void tst_QDateTimeEdit::newCase5()
{
    testWidget->setDisplayFormat("yyyy-MM-dd hh:mm:ss zzz 'ms'");
    testWidget->setDateTime(QDateTime(QDate(2005, 10, 7), QTime(17, 44, 13, 100)));
    testWidget->show();
    QCOMPARE(testWidget->lineEdit()->displayText(), QString("2005-10-07 17:44:13 100 ms"));
#ifdef Q_WS_MAC
    QTest::keyClick(testWidget, Qt::Key_Right, Qt::ControlModifier);
#else
    QTest::keyClick(testWidget, Qt::Key_End);
#endif
    QTest::keyClick(testWidget, Qt::Key_Backtab, Qt::ShiftModifier);

    QTest::keyClick(testWidget, Qt::Key_Return);
    QTest::keyClick(testWidget, Qt::Key_1);
    QTest::keyClick(testWidget, Qt::Key_2);
    QTest::keyClick(testWidget, Qt::Key_4);
    QCOMPARE(testWidget->lineEdit()->displayText(), QString("2005-10-07 17:44:13 124 ms"));

    QTest::keyClick(testWidget, Qt::Key_Backspace);
    QCOMPARE(testWidget->lineEdit()->displayText(), QString("2005-10-07 17:44:13 12 ms"));
}

void tst_QDateTimeEdit::newCase6()
{
    testWidget->setDisplayFormat("d-yyyy-MM-dd");
    testWidget->setDate(QDate(2005, 10, 7));
    testWidget->show();
    QCOMPARE(testWidget->lineEdit()->displayText(), QString("7-2005-10-07"));
#ifdef Q_WS_MAC
    QTest::keyClick(testWidget, Qt::Key_Left, Qt::ControlModifier);
#else
    QTest::keyClick(testWidget, Qt::Key_Home);
#endif
    QTest::keyClick(testWidget, Qt::Key_Return);
    QTest::keyClick(testWidget, Qt::Key_1);
    QTest::keyClick(testWidget, Qt::Key_2);
    QCOMPARE(testWidget->lineEdit()->displayText(), QString("12-2005-10-12"));
}


void tst_QDateTimeEdit::task98554()
{
    testWidget->setDisplayFormat("mm.ss.zzz(ms)");
    testWidget->setTime(QTime(0, 0, 9));
    testWidget->setCurrentSection(QDateTimeEdit::SecondSection);
    testWidget->show();
    QCOMPARE(testWidget->lineEdit()->displayText(), QString("00.09.000(09)"));
    QCOMPARE(testWidget->time(), QTime(0, 0, 9, 0));
    QTest::keyClick(testWidget, Qt::Key_Up);
    QCOMPARE(testWidget->lineEdit()->displayText(), QString("00.10.000(010)"));
    QCOMPARE(testWidget->time(), QTime(0, 0, 10, 0));
}

static QList<int> makeList(int val1, int val2 = -1, int val3 = -1, int val4 = -1, int val5 = -1, int val6 = -1, int val7 = -1)
{
    QList<int> ret;
    Q_ASSERT(val1 >= 0);
    ret << val1;
    if (val2 < 0) {return ret;} else {ret << val2;}
    if (val3 < 0) {return ret;} else {ret << val3;}
    if (val4 < 0) {return ret;} else {ret << val4;}
    if (val5 < 0) {return ret;} else {ret << val5;}
    if (val6 < 0) {return ret;} else {ret << val6;}
    if (val7 >= 0) {ret << val2;}
    return ret;
}


void tst_QDateTimeEdit::setCurrentSection_data()
{
    QTest::addColumn<QString>("format");
    QTest::addColumn<QDateTime>("dateTime");
    QTest::addColumn<QList<int> >("setCurrentSections");
    QTest::addColumn<QList<int> >("expectedCursorPositions");

    QTest::newRow("Day") << QString("dd/MM/yyyy hh:mm:ss.zzz d/M/yy h:m:s.z") << QDateTime(QDate(2001, 1, 1), QTime(1, 2, 3, 4))
                         << makeList(QDateTimeEdit::DaySection, QDateTimeEdit::DaySection, QDateTimeEdit::DaySection)
                         << makeList(24, 0, 24);
    QTest::newRow("Month") << QString("dd/MM/yyyy hh:mm:ss.zzz d/M/yy h:m:s.z") << QDateTime(QDate(2001, 1, 1), QTime(1, 2, 3, 4))
                           << makeList(QDateTimeEdit::MonthSection, QDateTimeEdit::MonthSection, QDateTimeEdit::MonthSection)
                           << makeList(3, 26, 3);
    QTest::newRow("Year") << QString("dd/MM/yyyy hh:mm:ss.zzz d/M/yy h:m:s.z") << QDateTime(QDate(2001, 1, 1), QTime(1, 2, 3, 4))
                          << makeList(QDateTimeEdit::YearSection, QDateTimeEdit::YearSection, QDateTimeEdit::YearSection)
                          << makeList(6, 28, 6);
    QTest::newRow("Hour") << QString("dd/MM/yyyy hh:mm:ss.zzz d/M/yy h:m:s.z") << QDateTime(QDate(2001, 1, 1), QTime(1, 2, 3, 4))
                          << makeList(QDateTimeEdit::HourSection, QDateTimeEdit::HourSection, QDateTimeEdit::HourSection)
                          << makeList(11, 31, 11);
    QTest::newRow("Minute") << QString("dd/MM/yyyy hh:mm:ss.zzz d/M/yy h:m:s.z") << QDateTime(QDate(2001, 1, 1), QTime(1, 2, 3, 4))
                            << makeList(QDateTimeEdit::MinuteSection, QDateTimeEdit::MinuteSection, QDateTimeEdit::MinuteSection)
                            << makeList(14, 33, 14);
    QTest::newRow("Second") << QString("dd/MM/yyyy hh:mm:ss.zzz d/M/yy h:m:s.z") << QDateTime(QDate(2001, 1, 1), QTime(1, 2, 3, 4))
                            << makeList(QDateTimeEdit::SecondSection, QDateTimeEdit::SecondSection, QDateTimeEdit::SecondSection)
                            << makeList(17, 35, 17);
    QTest::newRow("MSec") << QString("dd/MM/yyyy hh:mm:ss.zzz d/M/yy h:m:s.z") << QDateTime(QDate(2001, 1, 1), QTime(1, 2, 3, 4))
                          << makeList(QDateTimeEdit::MSecSection, QDateTimeEdit::MSecSection, QDateTimeEdit::MSecSection)
                          << makeList(20, 37, 20);
}

void tst_QDateTimeEdit::setCurrentSection()
{
    QFETCH(QString, format);
    QFETCH(QDateTime, dateTime);
    QFETCH(QList<int>, setCurrentSections);
    QFETCH(QList<int>, expectedCursorPositions);

    Q_ASSERT(setCurrentSections.size() == expectedCursorPositions.size());
    testWidget->setDisplayFormat(format);
    testWidget->setDateTime(dateTime);
#ifdef Q_WS_MAC
    QTest::keyClick(testWidget, Qt::Key_Left, Qt::ControlModifier);
#else
    QTest::keyClick(testWidget, Qt::Key_Home);
#endif

    testWidget->resize(400, 100);
    for (int i=0; i<setCurrentSections.size(); ++i) {
        testWidget->setCurrentSection((QDateTimeEdit::Section)setCurrentSections.at(i));
        QCOMPARE(testWidget->currentSection(), (QDateTimeEdit::Section)setCurrentSections.at(i));
        QCOMPARE(testWidget->lineEdit()->cursorPosition(), expectedCursorPositions.at(i));
    }
}


void tst_QDateTimeEdit::setSelectedSection()
{
    testWidget->setDisplayFormat("mm.ss.zzz('ms') m");
    testWidget->setTime(QTime(0, 0, 9));
    testWidget->show();
#ifdef Q_WS_MAC
    QTest::keyClick(testWidget, Qt::Key_Left, Qt::ControlModifier);
#else
    QTest::keyClick(testWidget, Qt::Key_Home);
#endif
    QVERIFY(!testWidget->lineEdit()->hasSelectedText());
    testWidget->setSelectedSection(QDateTimeEdit::MinuteSection);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("00"));
    testWidget->setCurrentSection(QDateTimeEdit::MinuteSection);
    testWidget->setSelectedSection(QDateTimeEdit::MinuteSection);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("0"));
    testWidget->setSelectedSection(QDateTimeEdit::SecondSection);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("09"));
    testWidget->setSelectedSection(QDateTimeEdit::NoSection);
    QVERIFY(!testWidget->lineEdit()->hasSelectedText());
}

void tst_QDateTimeEdit::calendarPopup()
{
    {
        QDateEdit edit;
        QVERIFY(!edit.calendarWidget());
        edit.setCalendarPopup(true);
        QVERIFY(edit.calendarWidget());
    }

    {
        QTimeEdit edit;
        QVERIFY(!edit.calendarWidget());
        edit.setCalendarPopup(true);
        QVERIFY(!edit.calendarWidget());
    }

    {
        QDateEdit edit;
        QVERIFY(!edit.calendarWidget());
        QCalendarWidget *cw = new QCalendarWidget;
        edit.setCalendarWidget(cw);
        QVERIFY(!edit.calendarWidget());
        edit.setCalendarPopup(true);
        edit.setCalendarWidget(cw);
        QCOMPARE(edit.calendarWidget(), cw);
        edit.setDateRange(QDate(1980, 1, 5), QDate(1980, 2, 11));
        QCOMPARE(cw->minimumDate(), edit.minimumDate());
        QCOMPARE(cw->maximumDate(), edit.maximumDate());
        edit.setDate(QDate(1980, 1, 31));
        QCOMPARE(edit.date(), cw->selectedDate());
        cw->setSelectedDate(QDate(1980, 1, 30));
        QCOMPARE(edit.date(), cw->selectedDate());
    }

    testWidget->setDisplayFormat("dd/MM/yyyy");
    testWidget->setDateTime(QDateTime(QDate(2000, 1, 1), QTime(0, 0)));
    testWidget->show();
    testWidget->setCalendarPopup(true);
    QCOMPARE(testWidget->calendarPopup(), true);
    QStyle *style = testWidget->style();
    QStyleOptionComboBox opt;
    opt.initFrom(testWidget);
    opt.editable = true;
    opt.subControls = QStyle::SC_ComboBoxArrow;
    QRect rect = style->subControlRect(QStyle::CC_ComboBox, &opt, QStyle::SC_ComboBoxArrow, testWidget);
    QTest::mouseClick(testWidget, Qt::LeftButton, 0, QPoint(rect.left()+rect.width()/2, rect.top()+rect.height()/2));
    QWidget *wid = qFindChild<QWidget *>(testWidget, "qt_datetimedit_calendar");
    QVERIFY(wid != 0);
    testWidget->hide();

    QTimeEdit timeEdit;
    timeEdit.setCalendarPopup(true);
    timeEdit.show();

    opt.initFrom(&timeEdit);
    opt.subControls = QStyle::SC_ComboBoxArrow;
    rect = style->subControlRect(QStyle::CC_ComboBox, &opt, QStyle::SC_ComboBoxArrow, &timeEdit);
    QTest::mouseClick(&timeEdit, Qt::LeftButton, 0, QPoint(rect.left()+rect.width()/2, rect.top()+rect.height()/2));
    QWidget *wid2 = qFindChild<QWidget *>(&timeEdit, "qt_datetimedit_calendar");
    QVERIFY(wid2 == 0);
    timeEdit.hide();


    QDateEdit dateEdit;
    dateEdit.setCalendarPopup(true);
    dateEdit.setReadOnly(true);
    dateEdit.show();

    opt.initFrom(&dateEdit);
    opt.subControls = QStyle::SC_ComboBoxArrow;
    rect = style->subControlRect(QStyle::CC_ComboBox, &opt, QStyle::SC_ComboBoxArrow, &dateEdit);
    QTest::mouseClick(&dateEdit, Qt::LeftButton, 0, QPoint(rect.left()+rect.width()/2, rect.top()+rect.height()/2));
    QWidget *wid3 = qFindChild<QWidget *>(&dateEdit, "qt_datetimedit_calendar");
    QVERIFY(wid3 == 0);
    dateEdit.hide();

}

class RestoreLayoutDirectioner
{
public:
    RestoreLayoutDirectioner(Qt::LayoutDirection was)
        : old(was)
    {}

    ~RestoreLayoutDirectioner()
    {
        QApplication::setLayoutDirection(old);
    }
private:
    const Qt::LayoutDirection old;
};

void tst_QDateTimeEdit::reverseTest()
{
    const RestoreLayoutDirectioner restorer(QApplication::layoutDirection());
    QApplication::setLayoutDirection(Qt::RightToLeft);
    testWidget->setDisplayFormat("dd/MM/yyyy");
    testWidget->setDate(QDate(2001, 3, 30));
    QCOMPARE(testWidget->lineEdit()->displayText(), QString("2001/03/30"));
#ifdef Q_WS_MAC
    QTest::keyClick(testWidget, Qt::Key_Right, Qt::ControlModifier);
#else
    QTest::keyClick(testWidget, Qt::Key_End);
#endif
    QCOMPARE(testWidget->currentSection(), QDateTimeEdit::DaySection);
    QTest::keyClick(testWidget, Qt::Key_Up);
    QCOMPARE(testWidget->date(), QDate(2001, 3, 31));
    QCOMPARE(testWidget->lineEdit()->displayText(), QString("2001/03/31"));
}


void tst_QDateTimeEdit::hour12Test()
{
    testWidget->setDisplayFormat("hh a");
    testWidget->setTime(QTime(0, 0, 0));
    QCOMPARE(testWidget->lineEdit()->displayText(), QString("12 am"));
    for (int i=0; i<11; ++i) {
        QTest::keyClick(testWidget, Qt::Key_Up);
    }
    QCOMPARE(testWidget->lineEdit()->displayText(), QString("11 am"));
    QTest::keyClick(testWidget, Qt::Key_Up);
    QCOMPARE(testWidget->lineEdit()->displayText(), QString("12 pm"));
    for (int i=0; i<11; ++i) {
        QTest::keyClick(testWidget, Qt::Key_Up);
    }
    QCOMPARE(testWidget->lineEdit()->displayText(), QString("11 pm"));
    QTest::keyClick(testWidget, Qt::Key_Up);
    QCOMPARE(testWidget->lineEdit()->displayText(), QString("11 pm"));
    for (int i=0; i<12; ++i) {
        QTest::keyClick(testWidget, Qt::Key_Down);
    }
    QCOMPARE(testWidget->lineEdit()->displayText(), QString("11 am"));
    QTest::keyClick(testWidget, Qt::Key_1);
    QCOMPARE(testWidget->lineEdit()->displayText(), QString("1 am"));
    QTest::keyClick(testWidget, Qt::Key_3);
    QCOMPARE(testWidget->lineEdit()->displayText(), QString("1 am"));
}

void tst_QDateTimeEdit::yyTest()
{
    testWidget->setDisplayFormat("dd-MMM-yy");
    testWidget->setTime(QTime(0, 0, 0));
    testWidget->setDateRange(QDate(2005, 1, 1), QDate(2010, 12, 31));
    testWidget->setDate(testWidget->minimumDate());
    testWidget->setCurrentSection(QDateTimeEdit::YearSection);

    QString jan = QDate::shortMonthName(1);
    QCOMPARE(testWidget->lineEdit()->displayText(), "01-" + jan + "-05");
    QTest::keyClick(testWidget, Qt::Key_Up);
    QCOMPARE(testWidget->lineEdit()->displayText(), "01-" + jan + "-06");
    QTest::keyClick(testWidget, Qt::Key_Up);
    QCOMPARE(testWidget->lineEdit()->displayText(), "01-" + jan + "-07");
    QTest::keyClick(testWidget, Qt::Key_Up);
    QCOMPARE(testWidget->lineEdit()->displayText(), "01-" + jan + "-08");
    QTest::keyClick(testWidget, Qt::Key_Up);
    QCOMPARE(testWidget->lineEdit()->displayText(), "01-" + jan + "-09");
    QTest::keyClick(testWidget, Qt::Key_Up);
    QCOMPARE(testWidget->lineEdit()->displayText(), "01-" + jan + "-10");
    QTest::keyClick(testWidget, Qt::Key_Up);
    QCOMPARE(testWidget->lineEdit()->displayText(), "01-" + jan + "-10");
    testWidget->setWrapping(true);
    QTest::keyClick(testWidget, Qt::Key_Up);
    QCOMPARE(testWidget->lineEdit()->displayText(), "01-" + jan + "-05");

    testWidget->setDateRange(QDate(100, 1, 1), QDate(8000, 12, 31));
    testWidget->setDate(QDate(2000, 1, 1));
    testWidget->setCurrentSection(QDateTimeEdit::YearSection);
    testWidget->setWrapping(false);
    for (int i=0; i<10; ++i) {
        for (int j=0; j<50; ++j) {
            testWidget->stepBy(-1);
        }
        testWidget->stepBy(-50);
        QCOMPARE(testWidget->sectionText(QDateTimeEdit::YearSection), QString("00"));
        QCOMPARE(testWidget->date(), QDate(2000 - ((i + 1) * 100), 1, 1));
    }
}

void tst_QDateTimeEdit::task108572()
{
    testWidget->setDisplayFormat("hh:mm:ss.zzz");
    testWidget->setTime(QTime(0, 1, 2, 0));
    QCOMPARE(testWidget->lineEdit()->displayText(), QString("00:01:02.000"));

    testWidget->setCurrentSection(QDateTimeEdit::MSecSection);
    QTest::keyClick(testWidget, Qt::Key_Return);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("000"));
    QTest::keyClick(testWidget, Qt::Key_2);
    QCOMPARE(testWidget->lineEdit()->displayText(), QString("00:01:02.2"));
    QTest::keyClick(testWidget, Qt::Key_Return);
    QCOMPARE(testWidget->lineEdit()->displayText(), QString("00:01:02.200"));
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("200"));
    QCOMPARE(testWidget->time(), QTime(0, 1, 2, 200));
}

void tst_QDateTimeEdit::task149097()
{
    QSignalSpy dtSpy(testWidget, SIGNAL(dateTimeChanged(const QDateTime &)));
    QSignalSpy dSpy(testWidget, SIGNAL(dateChanged(const QDate &)));
    QSignalSpy tSpy(testWidget, SIGNAL(timeChanged(const QTime &)));

    testWidget->setDisplayFormat("yyyy/MM/dd hh:mm:ss");
    testWidget->setDateTime(QDateTime(QDate(2001, 02, 03), QTime(5, 1, 2)));
//    QTest::keyClick(testWidget, Qt::Key_Enter);
    QCOMPARE(dtSpy.count(), 1);
    QCOMPARE(dSpy.count(), 1);
    QCOMPARE(tSpy.count(), 1);
    testWidget->setCurrentSection(QDateTimeEdit::YearSection);
    testWidget->stepBy(1);

    QCOMPARE(dtSpy.count(), 2);
    QCOMPARE(dSpy.count(), 2);
    QCOMPARE(tSpy.count(), 1);

    testWidget->setCurrentSection(QDateTimeEdit::MinuteSection);
    testWidget->stepBy(1);

    QCOMPARE(dtSpy.count(), 3);
    QCOMPARE(dSpy.count(), 2);
    QCOMPARE(tSpy.count(), 2);
}

void tst_QDateTimeEdit::task148725()
{
    testWidget->setDisplayFormat("dd/MM");
    testWidget->setDate(QDate(2001, 2, 27));
    testWidget->stepBy(1);
    QCOMPARE(testWidget->date(), QDate(2001, 2, 28));
    testWidget->stepBy(1);
    QCOMPARE(testWidget->date(), QDate(2001, 2, 28));
    testWidget->setWrapping(true);
    testWidget->stepBy(1);
    QCOMPARE(testWidget->date(), QDate(2001, 2, 1));
}

void tst_QDateTimeEdit::task148522()
{
    QTimeEdit edit;
    const QDateTime dt(QDate(2000, 12, 12), QTime(12, 13, 14, 15));
    edit.setDateTime(dt);
    QCOMPARE(edit.dateTime(), dt);
}

void tst_QDateTimeEdit::ddMMMMyyyy()
{
    testWidget->setDisplayFormat("dd.MMMM.yyyy");
    testWidget->setDate(QDate(2000, 1, 1));
    testWidget->setCurrentSection(QDateTimeEdit::YearSection);
    QTest::keyClick(testWidget, Qt::Key_Enter);
    QCOMPARE(testWidget->lineEdit()->selectedText(), QString("2000"));
#ifdef Q_WS_MAC
    QTest::keyClick(testWidget, Qt::Key_Right, Qt::ControlModifier);
#else
    QTest::keyClick(testWidget, Qt::Key_End);
#endif
    QTest::keyClick(testWidget, Qt::Key_Backspace);
    QCOMPARE(testWidget->lineEdit()->text(), "01." + QDate::longMonthName(1) + ".200");
}

void tst_QDateTimeEdit::wheelEvent()
{
    testWidget->setDisplayFormat("dddd/MM");
    testWidget->setDate(QDate(2000, 2, 21));
    testWidget->setCurrentSection(QDateTimeEdit::DaySection);
    QWheelEvent w(testWidget->lineEdit()->geometry().center(), 120, 0, 0);
    qApp->sendEvent(testWidget, &w);
    QCOMPARE(testWidget->date(), QDate(2000, 2, 22));
    testWidget->setCurrentSection(QDateTimeEdit::MonthSection);
    qApp->sendEvent(testWidget, &w);
    QCOMPARE(testWidget->date(), QDate(2000, 3, 22));
}

void tst_QDateTimeEdit::specialValueCornerCase()
{
    // if you set minimum to value it won't update since value won't
    // be bounded to anything. If you have a specialValueText it needs
    // to call updateEdit to make sure the text is changed

    QDateTimeEdit edit;
    edit.setSpecialValueText("foobar");
    edit.setMinimumDate(edit.date());
    QCOMPARE(edit.minimumDate(), edit.date());
    QCOMPARE(edit.text(), QString("foobar"));
}

void tst_QDateTimeEdit::cursorPositionOnInit()
{
    {
        EditorDateEdit edit;
        edit.setDisplayFormat("dd/MM");
        edit.show();
        QCOMPARE(edit.lineEdit()->cursorPosition(), 0);
    }

    {
        EditorDateEdit edit;
        edit.setDisplayFormat("dd/MM");
        edit.setSpecialValueText("special");
        edit.setMinimumDate(edit.date());
        edit.show();
        QCOMPARE(edit.lineEdit()->cursorPosition(), 7);
        // ### legacy behavior. Keep it like this rather than changing
        // ### but add a test none-the-less
    }
}

void tst_QDateTimeEdit::task118867()
{
    EditorDateEdit edit;
    edit.setDisplayFormat("hh:mm");
    edit.setMinimumTime(QTime(5, 30));
    edit.setMaximumTime(QTime(6, 30));
    QCOMPARE(edit.text(), QString("05:30"));
    edit.lineEdit()->setCursorPosition(5);
    QTest::keyClick(&edit, Qt::Key_Backspace);
    QCOMPARE(edit.text(), QString("05:3"));
    QTest::keyClick(&edit, Qt::Key_Backspace);
    QCOMPARE(edit.text(), QString("05:"));
    QTest::keyClick(&edit, Qt::Key_1);
    QCOMPARE(edit.text(), QString("05:"));
    QTest::keyClick(&edit, Qt::Key_2);
    QCOMPARE(edit.text(), QString("05:"));
    QTest::keyClick(&edit, Qt::Key_3);
    QCOMPARE(edit.text(), QString("05:3"));
    QTest::keyClick(&edit, Qt::Key_3);
    QCOMPARE(edit.text(), QString("05:33"));
}

void tst_QDateTimeEdit::nextPrevSection_data()
{
    QTest::addColumn<Qt::Key>("key");
    QTest::addColumn<Qt::KeyboardModifiers>("modifiers");
    QTest::addColumn<QString>("selectedText");

    QTest::newRow("tab") << Qt::Key_Tab << (Qt::KeyboardModifiers)Qt::NoModifier << QString("56");
    QTest::newRow("backtab") << Qt::Key_Backtab << (Qt::KeyboardModifiers)Qt::NoModifier << QString("12");
    QTest::newRow("shift-tab") << Qt::Key_Tab << (Qt::KeyboardModifiers)Qt::ShiftModifier << QString("12");
    QTest::newRow("/") << Qt::Key_Slash << (Qt::KeyboardModifiers)Qt::NoModifier << QString("56");
    QTest::newRow("b") << Qt::Key_B << (Qt::KeyboardModifiers)Qt::NoModifier << QString("56");
    QTest::newRow("c") << Qt::Key_C << (Qt::KeyboardModifiers)Qt::NoModifier << QString("56");

    // 1. mac doesn't do these,
    // 2. some WinCE devices do not have modifiers
#if !defined(Q_OS_MAC) && !defined(WINCE_NO_MODIFIER_KEYS)
    QTest::newRow("ctrl-right") << Qt::Key_Right << (Qt::KeyboardModifiers)Qt::ControlModifier << QString("56");
    QTest::newRow("ctrl-left") << Qt::Key_Left << (Qt::KeyboardModifiers)Qt::ControlModifier << QString("12");
#endif
}


void tst_QDateTimeEdit::nextPrevSection()
{
    QFETCH(Qt::Key, key);
    QFETCH(Qt::KeyboardModifiers, modifiers);
    QFETCH(QString, selectedText);

    EditorDateEdit edit;
    edit.setDisplayFormat("hh/mm/bc9ss");
    edit.setTime(QTime(12, 34, 56));
    edit.setSelectedSection(QDateTimeEdit::MinuteSection);
    edit.show();
    QCOMPARE(edit.lineEdit()->selectedText(), QString("34")); // selftest
    QTest::keyClick(&edit, key, modifiers);
    QCOMPARE(edit.lineEdit()->selectedText(), selectedText);
}

void tst_QDateTimeEdit::dateEditTimeEditFormats()
{
    QTimeEdit t;
    t.setDisplayFormat("hh yyyy");
    QCOMPARE(t.displayedSections(), QDateTimeEdit::HourSection);

    QDateEdit d;
    d.setDisplayFormat("hh yyyy");
    QCOMPARE(d.displayedSections(), QDateTimeEdit::YearSection);
}


void tst_QDateTimeEdit::timeSpec_data()
{
    QTest::addColumn<bool>("useSetProperty");
    QTest::newRow("setProperty") << true;
    QTest::newRow("setTimeSpec") << false;
}


void tst_QDateTimeEdit::timeSpec()
{
    QFETCH(bool, useSetProperty);

    QDateTimeEdit edit;
    QCOMPARE(edit.dateTime().timeSpec(), edit.timeSpec());
    QCOMPARE(edit.minimumDateTime().timeSpec(), edit.timeSpec());
    QCOMPARE(edit.maximumDateTime().timeSpec(), edit.timeSpec());
    if (useSetProperty) {
        edit.setProperty("timeSpec", Qt::UTC);
    } else {
        edit.setTimeSpec(Qt::UTC);
    }
    QCOMPARE(edit.minimumDateTime().timeSpec(), edit.timeSpec());
    QCOMPARE(edit.maximumDateTime().timeSpec(), edit.timeSpec());
    QCOMPARE(edit.dateTime().timeSpec(), edit.timeSpec());
    if (useSetProperty) {
        edit.setProperty("timeSpec", Qt::LocalTime);
    } else {
        edit.setTimeSpec(Qt::LocalTime);
    }
    const QDateTime dt = edit.dateTime();
    QCOMPARE(edit.timeSpec(), Qt::LocalTime);
    const QDateTime utc = dt.toUTC();
    if (dt.time() != utc.time()) {
        const QDateTime min(QDate(1999, 1, 1), QTime(1, 0, 0), Qt::LocalTime);
        edit.setMinimumDateTime(min);
        QCOMPARE(edit.minimumTime(), min.time());
        if (useSetProperty) {
            edit.setProperty("timeSpec", Qt::UTC);
        } else {
            edit.setTimeSpec(Qt::UTC);
        }
        QVERIFY(edit.minimumTime() != min.time());
        QVERIFY(edit.minimumDateTime().timeSpec() != min.timeSpec());
        QCOMPARE(edit.minimumDateTime().toTime_t(), min.toTime_t());
    } else {
        QSKIP("Not tested in the GMT timezone", SkipAll);
    }
}

void tst_QDateTimeEdit::timeSpecBug()
{
    testWidget->setTimeSpec(Qt::UTC);
    testWidget->setDisplayFormat("hh:mm");
    testWidget->setTime(QTime(2, 2));
    const QString oldText = testWidget->text();
    const QDateTime oldDateTime = testWidget->dateTime();
    QTest::keyClick(testWidget, Qt::Key_Tab);
    QCOMPARE(oldDateTime, testWidget->dateTime());
    QCOMPARE(oldText, testWidget->text());
}


void tst_QDateTimeEdit::cachedDayTest()
{
    testWidget->setDisplayFormat("MM/dd");
    testWidget->setDate(QDate(2007, 1, 30));
    testWidget->setCurrentSection(QDateTimeEdit::DaySection);
    //QTest::keyClick(testWidget->lineEdit(), Qt::Key_Up); // this doesn't work
    //on Mac. QTestLib bug? ###
    QTest::keyClick(testWidget, Qt::Key_Up);
    testWidget->setCurrentSection(QDateTimeEdit::MonthSection);
    QTest::keyClick(testWidget, Qt::Key_Up);
    QCOMPARE(testWidget->date(), QDate(2007, 2, 28));
    QTest::keyClick(testWidget, Qt::Key_Up);
    QCOMPARE(testWidget->date(), QDate(2007, 3, 31));
    QTest::keyClick(testWidget, Qt::Key_Down);
    QCOMPARE(testWidget->date(), QDate(2007, 2, 28));
    QTest::keyClick(testWidget, Qt::Key_Down);
    QCOMPARE(testWidget->date(), QDate(2007, 1, 31));

    testWidget->setCurrentSection(QDateTimeEdit::DaySection);
    QTest::keyClick(testWidget, Qt::Key_Down);
    QCOMPARE(testWidget->date(), QDate(2007, 1, 30));
    testWidget->setCurrentSection(QDateTimeEdit::MonthSection);
    QTest::keyClick(testWidget, Qt::Key_Up);
    QCOMPARE(testWidget->date(), QDate(2007, 2, 28));
    testWidget->setCurrentSection(QDateTimeEdit::MonthSection);
    QTest::keyClick(testWidget, Qt::Key_Up);
    QCOMPARE(testWidget->date(), QDate(2007, 3, 30));

}

void tst_QDateTimeEdit::monthEdgeCase()
{
    EditorDateEdit edit;
    edit.setLocale(QLocale("fr_FR"));
    edit.setDisplayFormat("MMM d");
    edit.setDate(QDate(2000, 1, 1));
    QCOMPARE(edit.text(), QString("janv. 1"));
    edit.lineEdit()->setCursorPosition(5);
    QTest::keyClick(&edit, Qt::Key_Backspace);
    QCOMPARE(edit.text(), QString("janv 1"));
}

class RestoreLocaler
{
public:
    RestoreLocaler()
        : old(QLocale())
    {}

    ~RestoreLocaler()
    {
        QLocale::setDefault(old);
    }
private:
    const QLocale old;
};




void tst_QDateTimeEdit::setLocale()
{
    RestoreLocaler r;
    QLocale::setDefault(QLocale("en_US"));
    {
        EditorDateEdit edit;
        edit.setDisplayFormat("MMMM d");
        edit.setDate(QDate(2000, 1, 1));
        QCOMPARE(edit.text(), QString("January 1"));
    }
    QLocale::setDefault(QLocale("no_NO"));
    {
        EditorDateEdit edit;
        edit.setDisplayFormat("MMMM d");
        edit.setDate(QDate(2000, 1, 1));
        QCOMPARE(edit.text().toLower(), QString("januar 1"));
        // I get Januar on Mac and januar on linux
    }
    QLocale::setDefault(QLocale("en_US"));
    {
        EditorDateEdit edit;
        edit.setDisplayFormat("MMMM d");
        edit.setDate(QDate(2000, 1, 1));
        QCOMPARE(edit.text(), QString("January 1"));
        edit.setLocale(QLocale("no_NO"));
        QCOMPARE(edit.text().toLower(), QString("januar 1"));
        edit.setLocale(QLocale("no_NO"));
    }
}


void tst_QDateTimeEdit::potentialYYValueBug()
{
    EditorDateEdit edit;
    edit.setDisplayFormat("dd/MM/yy");
    QCOMPARE(edit.minimumDate(), QDate(1752, 9, 14));
    edit.setDate(edit.minimumDate());
    edit.lineEdit()->setFocus();

#ifdef Q_WS_MAC
    QTest::keyClick(&edit, Qt::Key_Right, Qt::ControlModifier);
#else
    QTest::keyClick(&edit, Qt::Key_End);
#endif
    QTest::keyClick(&edit, Qt::Key_Backspace);
    QCOMPARE(edit.text(), QString("14/09/5"));
}

void tst_QDateTimeEdit::textSectionAtEnd()
{
    EditorDateEdit edit;
    edit.setDisplayFormat("MMMM");
    edit.setDate(QDate(2000, 1, 1));
    edit.lineEdit()->setFocus();
#ifdef Q_WS_MAC
    QTest::keyClick(&edit, Qt::Key_Right, Qt::ControlModifier);
#else
    QTest::keyClick(&edit, Qt::Key_End);
#endif
    QTest::keyClick(&edit, Qt::Key_Backspace);
    QCOMPARE(edit.text(), QString("Januar"));
}

void tst_QDateTimeEdit::keypadAutoAdvance_data()
{
    QTest::addColumn<Qt::KeyboardModifiers>("modifiers");
    QTest::newRow("None") << (Qt::KeyboardModifiers)Qt::NoModifier;
    QTest::newRow("Keypad") << (Qt::KeyboardModifiers)Qt::KeypadModifier;
}


void tst_QDateTimeEdit::keypadAutoAdvance()
{
    QFETCH(Qt::KeyboardModifiers, modifiers);

    EditorDateEdit edit;
    edit.setDate(QDate(2000, 2, 1));
    edit.setDisplayFormat("dd/MM");
#ifdef Q_WS_MAC
    QTest::keyClick(&edit, Qt::Key_Left, Qt::ControlModifier);
#else
    QTest::keyClick(&edit, Qt::Key_Home);
#endif
    QTest::keyClick(&edit, Qt::Key_Return);
    QCOMPARE(edit.lineEdit()->selectedText(), QString("01"));
    QTest::keyClick(&edit, Qt::Key_1, modifiers);
    QTest::keyClick(&edit, Qt::Key_2, modifiers);
    QCOMPARE(edit.lineEdit()->selectedText(), QString("02"));
}


void tst_QDateTimeEdit::task196924()
{
    EditorDateEdit edit;
    edit.setDisplayFormat("dd/M/yyyy");
    edit.setDate(QDate(2345, 6, 17));
    QCOMPARE(edit.text(), QString("17/6/2345"));
    QTest::keyClick(&edit, Qt::Key_Tab);
    QCOMPARE(edit.lineEdit()->selectedText(), QString("6"));
    QTest::keyClick(&edit, Qt::Key_3);
    QCOMPARE(edit.lineEdit()->selectedText(), QString("2345"));
    QCOMPARE(edit.text(), QString("17/3/2345"));

    edit.setDisplayFormat("dd/MM/yyyy");
    edit.setDate(QDate(2345, 6, 17));
    edit.lineEdit()->setCursorPosition(0);
    QCOMPARE(edit.text(), QString("17/06/2345"));
    QTest::keyClick(&edit, Qt::Key_Tab);
    QCOMPARE(edit.lineEdit()->selectedText(), QString("06"));
    QTest::keyClick(&edit, Qt::Key_3);
    QCOMPARE(edit.lineEdit()->selectedText(), QString("2345"));
    QCOMPARE(edit.text(), QString("17/03/2345"));

}

void tst_QDateTimeEdit::focusNextPrevChild()
{
    EditorDateEdit edit;
    edit.setDisplayFormat("dd/MM/yyyy");

    edit.show();
    edit.setFocus();
    edit.setCurrentSection(QDateTimeEdit::DaySection);

    QCOMPARE(edit.currentSection(), QDateTimeEdit::DaySection);
    edit.focusNextPrevChild(true);
    QCOMPARE(edit.currentSection(), QDateTimeEdit::MonthSection);
}



QTEST_MAIN(tst_QDateTimeEdit)
#include "tst_qdatetimeedit.moc"