/**************************************************************************** ** ** Copyright (C) 2014 Digia Plc and/or its subsidiary(-ies). ** Contact: http://www.qt-project.org/legal ** ** This file is part of the test suite of the Qt Toolkit. ** ** $QT_BEGIN_LICENSE:LGPL$ ** Commercial License Usage ** Licensees holding valid commercial Qt licenses may use this file in ** accordance with the commercial license agreement provided with the ** Software or, alternatively, in accordance with the terms contained in ** a written agreement between you and Digia. For licensing terms and ** conditions see http://qt.digia.com/licensing. For further information ** use the contact form at http://qt.digia.com/contact-us. ** ** GNU Lesser General Public License Usage ** Alternatively, this file may be used under the terms of the GNU Lesser ** General Public License version 2.1 as published by the Free Software ** Foundation and appearing in the file LICENSE.LGPL included in the ** packaging of this file. Please review the following information to ** ensure the GNU Lesser General Public License version 2.1 requirements ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. ** ** In addition, as a special exception, Digia gives you certain additional ** rights. These rights are described in the Digia Qt LGPL Exception ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package. ** ** GNU General Public License Usage ** Alternatively, this file may be used under the terms of the GNU ** General Public License version 3.0 as published by the Free Software ** Foundation and appearing in the file LICENSE.GPL included in the ** packaging of this file. Please review the following information to ** ensure the GNU General Public License version 3.0 requirements will be ** met: http://www.gnu.org/copyleft/gpl.html. ** ** ** $QT_END_LICENSE$ ** ****************************************************************************/ #include "../../shared/util.h" #include #include #include #include #include #include #include #include #if !defined(Q_OS_SYMBIAN) // Network test unnecessary? #include #endif #include #ifdef QT_NO_PROCESS QTEST_NOOP_MAIN #else #if defined(Q_OS_WIN) #include #endif //TESTED_CLASS= //TESTED_FILES= Q_DECLARE_METATYPE(QList); Q_DECLARE_METATYPE(QProcess::ExitStatus); Q_DECLARE_METATYPE(QProcess::ProcessState); #define QPROCESS_VERIFY(Process, Fn) \ { \ const bool ret = Process.Fn; \ if (ret == false) \ qWarning("QProcess error: %d: %s", Process.error(), qPrintable(Process.errorString())); \ QVERIFY(ret); \ } class tst_QProcess : public QObject { Q_OBJECT public: tst_QProcess(); virtual ~tst_QProcess(); public slots: void init(); void cleanup(); private slots: void getSetCheck(); void constructing(); void simpleStart(); void execute(); void startDetached(); void crashTest(); void crashTest2(); void echoTest_data(); void echoTest(); void echoTest2(); void echoTest_performance(); #if defined Q_OS_WIN void echoTestGui(); void batFiles_data(); void batFiles(); #endif void exitStatus_data(); void exitStatus(); void loopBackTest(); void readTimeoutAndThenCrash(); void waitForFinished(); void deadWhileReading(); void restartProcessDeadlock(); void closeWriteChannel(); void closeReadChannel(); void openModes(); void emitReadyReadOnlyWhenNewDataArrives(); void hardExit(); void softExit(); void softExitInSlots_data(); void softExitInSlots(); void mergedChannels(); void forwardedChannels(); void atEnd(); void atEnd2(); void processInAThread(); void processesInMultipleThreads(); void waitForFinishedWithTimeout(); void waitForReadyReadInAReadyReadSlot(); void waitForBytesWrittenInABytesWrittenSlot(); void spaceArgsTest_data(); void spaceArgsTest(); #if defined(Q_OS_WIN) || defined(Q_OS_SYMBIAN) void nativeArguments(); #endif void exitCodeTest(); void setEnvironment_data(); void setEnvironment(); void setProcessEnvironment_data(); void setProcessEnvironment(); void systemEnvironment(); void spaceInName(); void lockupsInStartDetached(); void waitForReadyReadForNonexistantProcess(); void setStandardInputFile(); void setStandardOutputFile_data(); void setStandardOutputFile(); void setStandardOutputProcess_data(); void setStandardOutputProcess(); void removeFileWhileProcessIsRunning(); void fileWriterProcess(); void detachedWorkingDirectoryAndPid(); void switchReadChannels(); void setWorkingDirectory(); void startFinishStartFinish(); void invalidProgramString_data(); void invalidProgramString(); void onlyOneStartedSignal(); void waitForStartedWithoutStart(); // keep these at the end, since they use lots of processes and sometimes // caused obscure failures to occur in tests that followed them (esp. on the Mac) void failToStart(); void failToStartWithWait(); void failToStartWithEventLoop(); protected slots: void readFromProcess(); void exitLoopSlot(); void restartProcess(); void waitForReadyReadInAReadyReadSlotSlot(); void waitForBytesWrittenInABytesWrittenSlotSlot(); private: QProcess *process; qint64 bytesAvailable; }; static inline QByteArray msgStartProcessFailed(const QString &binary, const QString &errorMessage) { const QString message = QString::fromLatin1("Unable to start '%1' from '%2': %3") .arg(binary, QDir::currentPath(), errorMessage); return message.toLocal8Bit(); } // Testing get/set functions void tst_QProcess::getSetCheck() { QProcess obj1; // ProcessChannelMode QProcess::readChannelMode() // void QProcess::setReadChannelMode(ProcessChannelMode) obj1.setReadChannelMode(QProcess::ProcessChannelMode(QProcess::SeparateChannels)); QCOMPARE(QProcess::ProcessChannelMode(QProcess::SeparateChannels), obj1.readChannelMode()); obj1.setReadChannelMode(QProcess::ProcessChannelMode(QProcess::MergedChannels)); QCOMPARE(QProcess::ProcessChannelMode(QProcess::MergedChannels), obj1.readChannelMode()); obj1.setReadChannelMode(QProcess::ProcessChannelMode(QProcess::ForwardedChannels)); QCOMPARE(QProcess::ProcessChannelMode(QProcess::ForwardedChannels), obj1.readChannelMode()); // ProcessChannel QProcess::readChannel() // void QProcess::setReadChannel(ProcessChannel) obj1.setReadChannel(QProcess::ProcessChannel(QProcess::StandardOutput)); QCOMPARE(QProcess::ProcessChannel(QProcess::StandardOutput), obj1.readChannel()); obj1.setReadChannel(QProcess::ProcessChannel(QProcess::StandardError)); QCOMPARE(QProcess::ProcessChannel(QProcess::StandardError), obj1.readChannel()); } tst_QProcess::tst_QProcess() { #ifdef Q_OS_WIN // Set current directory such that the test binaries are found. QDir workingDir(QDir::current()); const QString workingDirPath = workingDir.absolutePath(); if (workingDirPath.endsWith(QLatin1String("debug"), Qt::CaseInsensitive) || workingDirPath.endsWith(QLatin1String("release"), Qt::CaseInsensitive)) { workingDir.cdUp(); QDir::setCurrent(workingDir.absolutePath()); } #endif } tst_QProcess::~tst_QProcess() { } void tst_QProcess::init() { #ifdef Q_OS_SYMBIAN QString dirStr = QString::fromLatin1("c:\\logs"); QDir dir; if (!dir.exists(dirStr)) dir.mkpath(dirStr); #endif } void tst_QProcess::cleanup() { } //----------------------------------------------------------------------------- void tst_QProcess::constructing() { QProcess process; QCOMPARE(process.readChannel(), QProcess::StandardOutput); QCOMPARE(process.workingDirectory(), QString()); QCOMPARE(process.environment(), QStringList()); QCOMPARE(process.error(), QProcess::UnknownError); QCOMPARE(process.state(), QProcess::NotRunning); QCOMPARE(process.pid(), Q_PID(0)); QCOMPARE(process.readAllStandardOutput(), QByteArray()); QCOMPARE(process.readAllStandardError(), QByteArray()); QCOMPARE(process.canReadLine(), false); // QIODevice QCOMPARE(process.openMode(), QIODevice::NotOpen); QVERIFY(!process.isOpen()); QVERIFY(!process.isReadable()); QVERIFY(!process.isWritable()); QVERIFY(process.isSequential()); QCOMPARE(process.pos(), qlonglong(0)); QCOMPARE(process.size(), qlonglong(0)); QVERIFY(process.atEnd()); QCOMPARE(process.bytesAvailable(), qlonglong(0)); QCOMPARE(process.bytesToWrite(), qlonglong(0)); QVERIFY(!process.errorString().isEmpty()); char c; QCOMPARE(process.read(&c, 1), qlonglong(-1)); QCOMPARE(process.write(&c, 1), qlonglong(-1)); QProcess proc2; } void tst_QProcess::simpleStart() { qRegisterMetaType("QProcess::ProcessState"); process = new QProcess; QSignalSpy spy(process, SIGNAL(stateChanged(QProcess::ProcessState))); connect(process, SIGNAL(readyRead()), this, SLOT(readFromProcess())); /* valgrind dislike SUID binaries(those that have the `s'-flag set), which * makes it fail to start the process. For this reason utilities like `ping' won't * start, when the auto test is run through `valgrind'. */ const QString binary = QLatin1String("testProcessNormal/testProcessNormal"); process->start(binary); if (process->state() != QProcess::Starting) QCOMPARE(process->state(), QProcess::Running); QVERIFY2(process->waitForStarted(5000), qPrintable(process->errorString())); QCOMPARE(process->state(), QProcess::Running); #if defined(Q_OS_WINCE) // Note: This actually seems incorrect, it will only exit the while loop when finishing fails while (process->waitForFinished(5000)) { } #elif defined(Q_OS_SYMBIAN) QVERIFY(process->waitForFinished(5000)); #else while (process->waitForReadyRead(5000)) { } #endif QCOMPARE(int(process->state()), int(QProcess::NotRunning)); delete process; process = 0; QCOMPARE(spy.count(), 3); QCOMPARE(qVariantValue(spy.at(0).at(0)), QProcess::Starting); QCOMPARE(qVariantValue(spy.at(1).at(0)), QProcess::Running); QCOMPARE(qVariantValue(spy.at(2).at(0)), QProcess::NotRunning); } //----------------------------------------------------------------------------- void tst_QProcess::execute() { QCOMPARE(QProcess::execute("testProcessNormal/testProcessNormal", QStringList() << "arg1" << "arg2"), 0); QCOMPARE(QProcess::execute("nonexistingexe"), -2); } //----------------------------------------------------------------------------- void tst_QProcess::startDetached() { QProcess proc; QVERIFY(proc.startDetached("testProcessNormal/testProcessNormal", QStringList() << "arg1" << "arg2")); QCOMPARE(QProcess::startDetached("nonexistingexe"), false); } //----------------------------------------------------------------------------- void tst_QProcess::readFromProcess() { int lines = 0; while (process->canReadLine()) { ++lines; QByteArray line = process->readLine(); } } //----------------------------------------------------------------------------- void tst_QProcess::crashTest() { qRegisterMetaType("QProcess::ProcessState"); #ifdef Q_OS_WIN QSKIP("This test opens a crash dialog on Windows", SkipSingle); #endif process = new QProcess; QSignalSpy stateSpy(process, SIGNAL(stateChanged(QProcess::ProcessState))); const QString binary = QLatin1String("testProcessCrash/testProcessCrash"); process->start(binary); QVERIFY2(process->waitForStarted(5000), msgStartProcessFailed(binary, process->errorString()).constData()); qRegisterMetaType("QProcess::ProcessError"); qRegisterMetaType("QProcess::ExitStatus"); QSignalSpy spy(process, SIGNAL(error(QProcess::ProcessError))); QSignalSpy spy2(process, SIGNAL(finished(int, QProcess::ExitStatus))); QVERIFY(process->waitForFinished(5000)); QCOMPARE(spy.count(), 1); QCOMPARE(*static_cast(spy.at(0).at(0).constData()), QProcess::Crashed); QCOMPARE(spy2.count(), 1); QCOMPARE(*static_cast(spy2.at(0).at(1).constData()), QProcess::CrashExit); QCOMPARE(process->exitStatus(), QProcess::CrashExit); delete process; process = 0; QCOMPARE(stateSpy.count(), 3); QCOMPARE(qVariantValue(stateSpy.at(0).at(0)), QProcess::Starting); QCOMPARE(qVariantValue(stateSpy.at(1).at(0)), QProcess::Running); QCOMPARE(qVariantValue(stateSpy.at(2).at(0)), QProcess::NotRunning); } //----------------------------------------------------------------------------- void tst_QProcess::crashTest2() { #ifdef Q_OS_WIN QSKIP("This test opens a crash dialog on Windows", SkipSingle); #endif process = new QProcess; const QString binary = QLatin1String("testProcessCrash/testProcessCrash"); process->start(binary); QVERIFY2(process->waitForStarted(5000), msgStartProcessFailed(binary, process->errorString()).constData()); qRegisterMetaType("QProcess::ProcessError"); qRegisterMetaType("QProcess::ExitStatus"); QSignalSpy spy(process, SIGNAL(error(QProcess::ProcessError))); QSignalSpy spy2(process, SIGNAL(finished(int, QProcess::ExitStatus))); QObject::connect(process, SIGNAL(finished(int)), this, SLOT(exitLoopSlot())); QTestEventLoop::instance().enterLoop(5); if (QTestEventLoop::instance().timeout()) QFAIL("Failed to detect crash : operation timed out"); QCOMPARE(spy.count(), 1); QCOMPARE(*static_cast(spy.at(0).at(0).constData()), QProcess::Crashed); QCOMPARE(spy2.count(), 1); QCOMPARE(*static_cast(spy2.at(0).at(1).constData()), QProcess::CrashExit); QCOMPARE(process->exitStatus(), QProcess::CrashExit); delete process; process = 0; } //----------------------------------------------------------------------------- void tst_QProcess::echoTest_data() { QTest::addColumn("input"); QTest::newRow("1") << QByteArray("H"); QTest::newRow("2") << QByteArray("He"); QTest::newRow("3") << QByteArray("Hel"); QTest::newRow("4") << QByteArray("Hell"); QTest::newRow("5") << QByteArray("Hello"); QTest::newRow("100 bytes") << QByteArray(100, '@'); QTest::newRow("1000 bytes") << QByteArray(1000, '@'); QTest::newRow("10000 bytes") << QByteArray(10000, '@'); } //----------------------------------------------------------------------------- void tst_QProcess::echoTest() { #ifdef Q_OS_WINCE QSKIP("Reading and writing to a process is not supported on Qt/CE", SkipAll); #endif #if defined(Q_OS_SYMBIAN) QSKIP("Reading and writing to a process is not supported on Qt/Symbian", SkipAll); #endif QFETCH(QByteArray, input); process = new QProcess; connect(process, SIGNAL(readyRead()), this, SLOT(exitLoopSlot())); #ifdef Q_OS_MAC const QString binary = QLatin1String("testProcessEcho/testProcessEcho.app"); #else const QString binary = QLatin1String("testProcessEcho/testProcessEcho"); #endif process->start(binary); QVERIFY2(process->waitForStarted(5000), msgStartProcessFailed(binary, process->errorString()).constData()); process->write(input); QTime stopWatch; stopWatch.start(); do { QVERIFY(process->isOpen()); QTestEventLoop::instance().enterLoop(2); } while (stopWatch.elapsed() < 60000 && process->bytesAvailable() < input.size()); if (stopWatch.elapsed() >= 60000) QFAIL("Timed out"); QByteArray message = process->readAll(); QCOMPARE(message.size(), input.size()); char *c1 = message.data(); char *c2 = input.data(); while (*c1 && *c2) { if (*c1 != *c2) QCOMPARE(*c1, *c2); ++c1; ++c2; } QCOMPARE(*c1, *c2); process->write("", 1); QVERIFY(process->waitForFinished(5000)); delete process; process = 0; } //----------------------------------------------------------------------------- void tst_QProcess::exitLoopSlot() { QTestEventLoop::instance().exitLoop(); } //----------------------------------------------------------------------------- void tst_QProcess::echoTest2() { #ifdef Q_OS_WINCE QSKIP("Reading and writing to a process is not supported on Qt/CE", SkipAll); #endif #if defined(Q_OS_SYMBIAN) QSKIP("Reading and writing to a process is not supported on Qt/Symbian", SkipAll); #endif process = new QProcess; connect(process, SIGNAL(readyRead()), this, SLOT(exitLoopSlot())); #ifdef Q_OS_MAC const QString binary = QLatin1String("testProcessEcho2/testProcessEcho2.app"); #else const QString binary = QLatin1String("testProcessEcho2/testProcessEcho2"); #endif process->start(binary); QVERIFY2(process->waitForStarted(5000), msgStartProcessFailed(binary, process->errorString()).constData()); QVERIFY(!process->waitForReadyRead(250)); QCOMPARE(process->error(), QProcess::Timedout); process->write("Hello"); QSignalSpy spy1(process, SIGNAL(readyReadStandardOutput())); QSignalSpy spy2(process, SIGNAL(readyReadStandardError())); QTime stopWatch; stopWatch.start(); forever { QTestEventLoop::instance().enterLoop(1); if (stopWatch.elapsed() >= 30000) QFAIL("Timed out"); process->setReadChannel(QProcess::StandardOutput); qint64 baso = process->bytesAvailable(); process->setReadChannel(QProcess::StandardError); qint64 base = process->bytesAvailable(); if (baso == 5 && base == 5) break; } QVERIFY(spy1.count() > 0); QVERIFY(spy2.count() > 0); QCOMPARE(process->readAllStandardOutput(), QByteArray("Hello")); QCOMPARE(process->readAllStandardError(), QByteArray("Hello")); process->write("", 1); QVERIFY(process->waitForFinished(5000)); delete process; process = 0; } //----------------------------------------------------------------------------- void tst_QProcess::echoTest_performance() { #ifdef Q_OS_WINCE QSKIP("Reading and writing to a process is not supported on Qt/CE", SkipAll); #endif #if defined(Q_OS_SYMBIAN) QSKIP("Reading and writing to a process is not supported on Qt/Symbian", SkipAll); #endif QProcess process; #ifdef Q_OS_MAC const QString binary = QLatin1String("testProcessLoopback/testProcessLoopback.app"); #else const QString binary = QLatin1String("testProcessLoopback/testProcessLoopback"); #endif process.start(binary); QVERIFY2(process.waitForStarted(5000), msgStartProcessFailed(binary, process.errorString()).constData()); QByteArray array; array.resize(1024 * 1024); for (int j = 0; j < array.size(); ++j) array[j] = 'a' + (j % 20); QVERIFY(process.waitForStarted()); QTime stopWatch; stopWatch.start(); qint64 totalBytes = 0; QByteArray dump; QSignalSpy readyReadSpy(&process, SIGNAL(readyRead())); while (stopWatch.elapsed() < 2000) { process.write(array); while (process.bytesToWrite() > 0) { int readCount = readyReadSpy.count(); QVERIFY(process.waitForBytesWritten(5000)); if (readyReadSpy.count() == readCount) QVERIFY(process.waitForReadyRead(5000)); } while (process.bytesAvailable() < array.size()) QVERIFY2(process.waitForReadyRead(5000), qPrintable(process.errorString())); dump = process.readAll(); totalBytes += dump.size(); } qDebug() << "Elapsed time:" << stopWatch.elapsed() << "ms;" << "transfer rate:" << totalBytes / (1048.576) / stopWatch.elapsed() << "MB/s"; for (int j = 0; j < array.size(); ++j) QCOMPARE(char(dump.at(j)), char('a' + (j % 20))); process.closeWriteChannel(); QVERIFY(process.waitForFinished()); } #if defined Q_OS_WIN //----------------------------------------------------------------------------- void tst_QProcess::echoTestGui() { #ifdef Q_OS_WINCE QSKIP("Reading and writing to a process is not supported on Qt/CE", SkipAll); #endif #if defined(Q_OS_SYMBIAN) QSKIP("Reading and writing to a process is not supported on Qt/Symbian", SkipAll); #endif QProcess process; const QString binary = QLatin1String("testProcessEchoGui/testProcessEchoGui"); process.start(binary); QVERIFY2(process.waitForStarted(5000), msgStartProcessFailed(binary, process.errorString()).constData()); process.write("Hello"); process.write("q"); QVERIFY(process.waitForFinished(50000)); QCOMPARE(process.readAllStandardOutput(), QByteArray("Hello")); QCOMPARE(process.readAllStandardError(), QByteArray("Hello")); } //----------------------------------------------------------------------------- void tst_QProcess::batFiles_data() { QTest::addColumn("batFile"); QTest::addColumn("output"); QTest::newRow("simple") << QString::fromLatin1("testBatFiles/simple.bat") << QByteArray("Hello"); QTest::newRow("with space") << QString::fromLatin1("testBatFiles/with space.bat") << QByteArray("Hello"); } void tst_QProcess::batFiles() { #if defined(Q_OS_WINCE) QSKIP("Batch files are not supported on Windows CE", SkipAll); #endif #if defined(Q_OS_SYMBIAN) QSKIP("Batch files are not supported on Symbian", SkipAll); #endif QFETCH(QString, batFile); QFETCH(QByteArray, output); QProcess proc; proc.start(batFile, QStringList()); QVERIFY2(proc.waitForStarted(5000), msgStartProcessFailed(batFile, proc.errorString()).constData()); QVERIFY(proc.waitForFinished(5000)); QVERIFY(proc.bytesAvailable() > 0); QVERIFY(proc.readAll().startsWith(output)); } #endif //----------------------------------------------------------------------------- void tst_QProcess::exitStatus_data() { QTest::addColumn("processList"); QTest::addColumn >("exitStatus"); QTest::newRow("normal") << (QStringList() << "testProcessNormal/testProcessNormal") << (QList() << QProcess::NormalExit); QTest::newRow("crash") << (QStringList() << "testProcessCrash/testProcessCrash") << (QList() << QProcess::CrashExit); QTest::newRow("normal-crash") << (QStringList() << "testProcessNormal/testProcessNormal" << "testProcessCrash/testProcessCrash") << (QList() << QProcess::NormalExit << QProcess::CrashExit); QTest::newRow("crash-normal") << (QStringList() << "testProcessCrash/testProcessCrash" << "testProcessNormal/testProcessNormal") << (QList() << QProcess::CrashExit << QProcess::NormalExit); } void tst_QProcess::exitStatus() { process = new QProcess; QFETCH(QStringList, processList); QFETCH(QList, exitStatus); #ifdef Q_OS_WIN if (exitStatus.contains(QProcess::CrashExit)) QSKIP("This test opens a crash dialog on Windows", SkipSingle); #endif QCOMPARE(exitStatus.count(), processList.count()); for (int i = 0; i < processList.count(); ++i) { process->start(processList.at(i)); QVERIFY2(process->waitForStarted(5000), msgStartProcessFailed(processList.at(i), process->errorString()).constData()); QVERIFY(process->waitForFinished(5000)); QCOMPARE(process->exitStatus(), exitStatus.at(i)); } process->deleteLater(); process = 0; } //----------------------------------------------------------------------------- void tst_QProcess::loopBackTest() { #ifdef Q_OS_WINCE QSKIP("Reading and writing to a process is not supported on Qt/CE", SkipAll); #endif #if defined(Q_OS_SYMBIAN) QSKIP("Reading and writing to a process is not supported on Qt/Symbian", SkipAll); #endif process = new QProcess; #ifdef Q_OS_MAC const QString binary = QLatin1String("testProcessEcho/testProcessEcho.app"); #else const QString binary = QLatin1String("testProcessEcho/testProcessEcho"); #endif process->start(binary); QVERIFY2(process->waitForStarted(5000), msgStartProcessFailed(binary, process->errorString()).constData()); for (int i = 0; i < 100; ++i) { process->write("Hello"); do { QVERIFY(process->waitForReadyRead(5000)); } while (process->bytesAvailable() < 5); QCOMPARE(process->readAll(), QByteArray("Hello")); } process->write("", 1); QVERIFY(process->waitForFinished(5000)); delete process; process = 0; } //----------------------------------------------------------------------------- void tst_QProcess::readTimeoutAndThenCrash() { #ifdef Q_OS_WINCE QSKIP("Reading and writing to a process is not supported on Qt/CE", SkipAll); #endif #if defined(Q_OS_SYMBIAN) QSKIP("Reading and writing to a process is not supported on Qt/Symbian", SkipAll); #endif process = new QProcess; #ifdef Q_OS_MAC const QString binary = QLatin1String("testProcessEcho/testProcessEcho.app"); #else const QString binary = QLatin1String("testProcessEcho/testProcessEcho"); #endif process->start(binary); if (process->state() != QProcess::Starting) QCOMPARE(process->state(), QProcess::Running); QVERIFY(process->waitForStarted(5000)); QCOMPARE(process->state(), QProcess::Running); QVERIFY(!process->waitForReadyRead(5000)); QCOMPARE(process->error(), QProcess::Timedout); qRegisterMetaType("QProcess::ProcessError"); QSignalSpy spy(process, SIGNAL(error(QProcess::ProcessError))); process->kill(); QVERIFY(process->waitForFinished(5000)); QCOMPARE(process->state(), QProcess::NotRunning); QCOMPARE(spy.count(), 1); QCOMPARE(*static_cast(spy.at(0).at(0).constData()), QProcess::Crashed); delete process; process = 0; } void tst_QProcess::waitForFinished() { QProcess process; #ifdef Q_OS_MAC const QString binary = QLatin1String("testProcessOutput/testProcessOutput.app"); #else const QString binary = QLatin1String("testProcessOutput/testProcessOutput"); #endif process.start(binary); #if !defined(Q_OS_WINCE) && !defined(Q_OS_SYMBIAN) QVERIFY(process.waitForFinished(5000)); #else QVERIFY(process.waitForFinished(30000)); #endif QCOMPARE(process.exitStatus(), QProcess::NormalExit); #if defined(Q_OS_SYMBIAN) // Symbian test outputs to a file, so check that FILE* file = fopen("c:\\logs\\qprocess_output_test.txt","r"); int retval = 0; int count = 0; while((int)(retval = fgetc(file) )!= EOF) if (retval == '\n') count++; fclose(file); QCOMPARE(count, 200); #else # if defined (Q_OS_WINCE) QEXPECT_FAIL("", "Reading and writing to a process is not supported on Qt/CE", Continue); # endif QString output = process.readAll(); QCOMPARE(output.count("\n"), 10*1024); #endif process.start("blurdybloop"); QVERIFY(!process.waitForFinished()); QCOMPARE(process.error(), QProcess::FailedToStart); } void tst_QProcess::deadWhileReading() { #ifdef Q_OS_WINCE QSKIP("Reading and writing to a process is not supported on Qt/CE", SkipAll); #endif #if defined(Q_OS_SYMBIAN) QSKIP("Reading and writing to a process is not supported on Qt/Symbian", SkipAll); #endif QProcess process; #ifdef Q_OS_MAC const QString binary = QLatin1String("testProcessDeadWhileReading/testProcessDeadWhileReading.app"); #else const QString binary = QLatin1String("testProcessDeadWhileReading/testProcessDeadWhileReading"); #endif QString output; process.start(binary); QVERIFY2(process.waitForStarted(5000), msgStartProcessFailed(binary, process.errorString()).constData()); while (process.waitForReadyRead(5000)) output += process.readAll(); QCOMPARE(output.count("\n"), 10*1024); process.waitForFinished(); } //----------------------------------------------------------------------------- void tst_QProcess::restartProcessDeadlock() { #ifdef Q_OS_WINCE QSKIP("Reading and writing to a process is not supported on Qt/CE", SkipAll); #endif #if defined(Q_OS_SYMBIAN) QSKIP("Reading and writing to a process is not supported on Qt/Symbian", SkipAll); #endif // The purpose of this test is to detect whether restarting a // process in the finished() connected slot causes a deadlock // because of the way QProcessManager uses its locks. QProcess proc; process = &proc; connect(process, SIGNAL(finished(int)), this, SLOT(restartProcess())); #ifdef Q_OS_MAC const QString binary = QLatin1String("testProcessEcho/testProcessEcho.app"); #else const QString binary = QLatin1String("testProcessEcho/testProcessEcho"); #endif process->start(binary); QVERIFY2(process->waitForStarted(5000), msgStartProcessFailed(binary, process->errorString()).constData()); QCOMPARE(process->write("", 1), qlonglong(1)); QVERIFY(process->waitForFinished(5000)); process->disconnect(SIGNAL(finished(int))); QCOMPARE(process->write("", 1), qlonglong(1)); QVERIFY(process->waitForFinished(5000)); } void tst_QProcess::restartProcess() { #ifdef Q_OS_MAC const QString binary = QLatin1String("testProcessEcho/testProcessEcho.app"); #else const QString binary = QLatin1String("testProcessEcho/testProcessEcho"); #endif process->start(binary); QVERIFY2(process->waitForStarted(5000), msgStartProcessFailed(binary, process->errorString()).constData()); } //----------------------------------------------------------------------------- void tst_QProcess::closeWriteChannel() { #ifdef Q_OS_WINCE QSKIP("Reading and writing to a process is not supported on Qt/CE", SkipAll); #endif #if defined(Q_OS_SYMBIAN) QSKIP("Reading and writing to a process is not supported on Qt/Symbian", SkipAll); #endif QProcess more; const QString binary = QLatin1String("testProcessEOF/testProcessEOF"); more.start(binary); QVERIFY2(more.waitForStarted(5000), msgStartProcessFailed(binary, more.errorString()).constData()); QVERIFY(!more.waitForReadyRead(250)); QCOMPARE(more.error(), QProcess::Timedout); QVERIFY(more.write("Data to read") != -1); QVERIFY(!more.waitForReadyRead(250)); QCOMPARE(more.error(), QProcess::Timedout); more.closeWriteChannel(); QVERIFY(more.waitForReadyRead(5000)); QVERIFY(more.readAll().startsWith("Data to read")); if (more.state() == QProcess::Running) more.write("q"); QVERIFY(more.waitForFinished(5000)); } //----------------------------------------------------------------------------- void tst_QProcess::closeReadChannel() { #ifdef Q_OS_WINCE QSKIP("Reading and writing to a process is not supported on Qt/CE", SkipAll); #endif #if defined(Q_OS_SYMBIAN) QSKIP("Reading and writing to a process is not supported on Qt/Symbian", SkipAll); #endif for (int i = 0; i < 10; ++i) { QProcess::ProcessChannel channel1 = QProcess::StandardOutput; QProcess::ProcessChannel channel2 = QProcess::StandardError; QProcess proc; #ifdef Q_OS_MAC const QString binary = QLatin1String("testProcessEcho2/testProcessEcho2.app"); #else const QString binary = QLatin1String("testProcessEcho2/testProcessEcho2"); #endif proc.start(binary); QVERIFY2(proc.waitForStarted(5000), msgStartProcessFailed(binary, proc.errorString()).constData()); proc.closeReadChannel(i&1 ? channel2 : channel1); proc.setReadChannel(i&1 ? channel2 : channel1); proc.write("Data"); QVERIFY(!proc.waitForReadyRead(5000)); QVERIFY(proc.readAll().isEmpty()); proc.setReadChannel(i&1 ? channel1 : channel2); while (proc.bytesAvailable() < 4 && proc.waitForReadyRead(5000)) { } QCOMPARE(proc.readAll(), QByteArray("Data")); proc.write("", 1); QVERIFY(proc.waitForFinished(5000)); } } //----------------------------------------------------------------------------- void tst_QProcess::openModes() { #ifdef Q_OS_WINCE QSKIP("Reading and writing to a process is not supported on Qt/CE", SkipAll); #endif #if defined(Q_OS_SYMBIAN) QSKIP("Reading and writing to a process is not supported on Qt/Symbian", SkipAll); #endif QProcess proc; QVERIFY(!proc.isOpen()); QVERIFY(proc.openMode() == QProcess::NotOpen); #ifdef Q_OS_MAC const QString binary = QLatin1String("testProcessEcho3/testProcessEcho3.app"); #else const QString binary = QLatin1String("testProcessEcho3/testProcessEcho3"); #endif proc.start(binary); QVERIFY2(proc.waitForStarted(5000), msgStartProcessFailed(binary, proc.errorString()).constData()); QVERIFY(proc.isOpen()); QVERIFY(proc.openMode() == QProcess::ReadWrite); QVERIFY(proc.isReadable()); QVERIFY(proc.isWritable()); proc.write("Data"); proc.closeWriteChannel(); QVERIFY(proc.isWritable()); QVERIFY(proc.openMode() == QProcess::ReadWrite); while (proc.bytesAvailable() < 4 && proc.waitForReadyRead(5000)) { } QCOMPARE(proc.readAll().constData(), QByteArray("Data").constData()); proc.closeReadChannel(QProcess::StandardOutput); QVERIFY(proc.openMode() == QProcess::ReadWrite); QVERIFY(proc.isReadable()); proc.closeReadChannel(QProcess::StandardError); QVERIFY(proc.openMode() == QProcess::ReadWrite); QVERIFY(proc.isReadable()); proc.close(); QVERIFY(!proc.isOpen()); QVERIFY(!proc.isReadable()); QVERIFY(!proc.isWritable()); QCOMPARE(proc.state(), QProcess::NotRunning); } //----------------------------------------------------------------------------- void tst_QProcess::emitReadyReadOnlyWhenNewDataArrives() { #ifdef Q_OS_WINCE QSKIP("Reading and writing to a process is not supported on Qt/CE", SkipAll); #endif #if defined(Q_OS_SYMBIAN) QSKIP("Reading and writing to a process is not supported on Qt/Symbian", SkipAll); #endif QProcess proc; connect(&proc, SIGNAL(readyRead()), this, SLOT(exitLoopSlot())); QSignalSpy spy(&proc, SIGNAL(readyRead())); #ifdef Q_OS_MAC const QString binary = QLatin1String("testProcessEcho/testProcessEcho.app"); #else const QString binary = QLatin1String("testProcessEcho/testProcessEcho"); #endif proc.start(binary); QVERIFY2(proc.waitForStarted(5000), msgStartProcessFailed(binary, proc.errorString()).constData()); QCOMPARE(spy.count(), 0); proc.write("A"); QTestEventLoop::instance().enterLoop(5); if (QTestEventLoop::instance().timeout()) QFAIL("Operation timed out"); QCOMPARE(spy.count(), 1); QTestEventLoop::instance().enterLoop(1); QVERIFY(QTestEventLoop::instance().timeout()); QVERIFY(!proc.waitForReadyRead(250)); QObject::disconnect(&proc, SIGNAL(readyRead()), 0, 0); proc.write("B"); QVERIFY(proc.waitForReadyRead(5000)); proc.write("", 1); QVERIFY(proc.waitForFinished(5000)); } //----------------------------------------------------------------------------- void tst_QProcess::hardExit() { #ifndef Q_OS_WINCE const int timeOutMs = 5000; #else const int timeOutMs = 10000; #endif #if defined(Q_OS_SYMBIAN) QSKIP("Killing started processes is not supported on Qt/Symbian due platform security", SkipAll); #endif QProcess proc; #if defined(Q_OS_MAC) const QString binary = QLatin1String("testProcessEcho/testProcessEcho.app"); #elif defined(Q_OS_WINCE) const QString binary = QLatin1String("testSoftExit/testSoftExit"); #else const QString binary = QLatin1String("testProcessEcho/testProcessEcho"); #endif proc.start(binary); QVERIFY2(proc.waitForStarted(timeOutMs), msgStartProcessFailed(binary, proc.errorString()).constData()); proc.kill(); QVERIFY(proc.waitForFinished(5000)); QCOMPARE(int(proc.state()), int(QProcess::NotRunning)); QCOMPARE(int(proc.error()), int(QProcess::Crashed)); } //----------------------------------------------------------------------------- void tst_QProcess::softExit() { #if defined(Q_OS_SYMBIAN) QSKIP("Terminating started processes is not supported on Qt/Symbian due platform security", SkipAll); #endif QProcess proc; const QString binary = QLatin1String("testSoftExit/testSoftExit"); proc.start(binary); QVERIFY2(proc.waitForStarted(10000), msgStartProcessFailed(binary, proc.errorString()).constData()); #if !defined(Q_OS_WINCE) QVERIFY(proc.waitForReadyRead(10000)); #endif proc.terminate(); QVERIFY(proc.waitForFinished(10000)); QCOMPARE(int(proc.state()), int(QProcess::NotRunning)); QCOMPARE(int(proc.error()), int(QProcess::UnknownError)); } class SoftExitProcess : public QProcess { Q_OBJECT public: bool waitedForFinished; SoftExitProcess(int n) : waitedForFinished(false), n(n), killing(false) { connect(this, SIGNAL(finished(int, QProcess::ExitStatus)), this, SLOT(finishedSlot(int, QProcess::ExitStatus))); switch (n) { case 0: setReadChannelMode(QProcess::MergedChannels); connect(this, SIGNAL(readyRead()), this, SLOT(terminateSlot())); break; case 1: connect(this, SIGNAL(readyReadStandardOutput()), this, SLOT(terminateSlot())); break; case 2: connect(this, SIGNAL(readyReadStandardError()), this, SLOT(terminateSlot())); break; case 3: connect(this, SIGNAL(started()), this, SLOT(terminateSlot())); break; case 4: default: connect(this, SIGNAL(stateChanged(QProcess::ProcessState)), this, SLOT(terminateSlot())); break; } } void writeAfterStart(const char *buf, int count) { dataToWrite = QByteArray(buf, count); } void start(const QString &program) { QProcess::start(program); writePendingData(); } public slots: void terminateSlot() { writePendingData(); // In cases 3 and 4 we haven't written the data yet. if (killing || (n == 4 && state() != Running)) { // Don't try to kill the process before it is running - that can // be hazardous, as the actual child process might not be running // yet. Also, don't kill it "recursively". return; } killing = true; readAll(); terminate(); if ((waitedForFinished = waitForFinished(5000)) == false) { kill(); if (state() != NotRunning) waitedForFinished = waitForFinished(5000); } } void finishedSlot(int, QProcess::ExitStatus) { waitedForFinished = true; } private: void writePendingData() { if (!dataToWrite.isEmpty()) { write(dataToWrite); dataToWrite.clear(); } } private: int n; bool killing; QByteArray dataToWrite; }; //----------------------------------------------------------------------------- void tst_QProcess::softExitInSlots_data() { QTest::addColumn("appName"); #ifdef Q_OS_MAC QTest::newRow("gui app") << "testGuiProcess/testGuiProcess.app"; #else QTest::newRow("gui app") << "testGuiProcess/testGuiProcess"; #endif #ifdef Q_OS_MAC QTest::newRow("console app") << "testProcessEcho2/testProcessEcho2.app"; #else QTest::newRow("console app") << "testProcessEcho2/testProcessEcho2"; #endif } //----------------------------------------------------------------------------- void tst_QProcess::softExitInSlots() { #ifdef Q_OS_WINCE QSKIP("Reading and writing to a process is not supported on Qt/CE", SkipAll); #endif #if defined(Q_OS_SYMBIAN) QSKIP("Reading and writing to a process is not supported on Qt/Symbian", SkipAll); #endif QFETCH(QString, appName); for (int i = 0; i < 5; ++i) { SoftExitProcess proc(i); proc.writeAfterStart("OLEBOLE", 8); // include the \0 proc.start(appName); QTRY_VERIFY(proc.waitedForFinished); QCOMPARE(proc.state(), QProcess::NotRunning); } } //----------------------------------------------------------------------------- void tst_QProcess::mergedChannels() { #ifdef Q_OS_WINCE QSKIP("Reading and writing to a process is not supported on Qt/CE", SkipAll); #endif #if defined(Q_OS_SYMBIAN) QSKIP("Reading and writing to a process is not supported on Qt/Symbian", SkipAll); #endif QProcess process; process.setReadChannelMode(QProcess::MergedChannels); QCOMPARE(process.readChannelMode(), QProcess::MergedChannels); #ifdef Q_OS_MAC const QString binary = QLatin1String("testProcessEcho2/testProcessEcho2.app"); #else const QString binary = QLatin1String("testProcessEcho2/testProcessEcho2"); #endif process.start(binary); QVERIFY2(process.waitForStarted(5000), msgStartProcessFailed(binary, process.errorString()).constData()); for (int i = 0; i < 100; ++i) { QCOMPARE(process.write("abc"), qlonglong(3)); while (process.bytesAvailable() < 6) QVERIFY(process.waitForReadyRead(5000)); QCOMPARE(process.readAll(), QByteArray("aabbcc")); } process.closeWriteChannel(); QVERIFY(process.waitForFinished(5000)); } //----------------------------------------------------------------------------- void tst_QProcess::forwardedChannels() { #ifdef Q_OS_WINCE QSKIP("Reading and writing to a process is not supported on Qt/CE", SkipAll); #endif #if defined(Q_OS_SYMBIAN) QSKIP("Reading and writing to a process is not supported on Qt/Symbian", SkipAll); #endif QProcess process; process.setReadChannelMode(QProcess::ForwardedChannels); QCOMPARE(process.readChannelMode(), QProcess::ForwardedChannels); #ifdef Q_OS_MAC const QString binary = QLatin1String("testProcessEcho2/testProcessEcho2.app"); #else const QString binary = QLatin1String("testProcessEcho2/testProcessEcho2"); #endif process.start(binary); QVERIFY2(process.waitForStarted(5000), msgStartProcessFailed(binary, process.errorString()).constData()); QCOMPARE(process.write("forwarded\n"), qlonglong(10)); QVERIFY(!process.waitForReadyRead(250)); QCOMPARE(process.bytesAvailable(), qlonglong(0)); process.closeWriteChannel(); QVERIFY(process.waitForFinished(5000)); } //----------------------------------------------------------------------------- void tst_QProcess::atEnd() { #ifdef Q_OS_WINCE QSKIP("Reading and writing to a process is not supported on Qt/CE", SkipAll); #endif #if defined(Q_OS_SYMBIAN) QSKIP("Reading and writing to a process is not supported on Qt/Symbian", SkipAll); #endif QProcess process; #ifdef Q_OS_MAC const QString binary = QLatin1String("testProcessEcho/testProcessEcho.app"); #else const QString binary = QLatin1String("testProcessEcho/testProcessEcho"); #endif process.start(binary); QVERIFY2(process.waitForStarted(5000), msgStartProcessFailed(binary, process.errorString()).constData()); process.write("abcdefgh\n"); while (process.bytesAvailable() < 8) QVERIFY(process.waitForReadyRead(5000)); QTextStream stream(&process); QVERIFY(!stream.atEnd()); QString tmp = stream.readLine(); QVERIFY(stream.atEnd()); QCOMPARE(tmp, QString::fromLatin1("abcdefgh")); process.write("", 1); QVERIFY(process.waitForFinished(5000)); } class TestThread : public QThread { Q_OBJECT public: inline int code() { return exitCode; } #if defined(Q_OS_SYMBIAN) int serial; #endif protected: inline void run() { exitCode = 90210; QProcess process; connect(&process, SIGNAL(finished(int)), this, SLOT(catchExitCode(int)), Qt::DirectConnection); QStringList args; #ifdef Q_OS_MAC const QString binary = QLatin1String("testProcessEcho/testProcessEcho.app"); #elif defined(Q_OS_SYMBIAN) && defined(Q_CC_NOKIAX86) // WINSCW builds in Symbian do not allow multiple processes to load Qt libraries, // so use just a simple process instead of testDetached. const QString binary = QLatin1String("testProcessNormal"); #elif defined(Q_OS_SYMBIAN) // testDetached used because it does something, but doesn't take too long. QFile infoFile(QString("c:\\logs\\detinfo%1").arg(serial)); args << infoFile.fileName(); const QString binary = QLatin1String("testDetached"); #else const QString binary = QLatin1String("testProcessEcho/testProcessEcho"); #endif process.start(binary); QVERIFY2(process.waitForStarted(5000), msgStartProcessFailed(binary, process.errorString()).constData()); #if !defined(Q_OS_WINCE) && !defined(Q_OS_SYMBIAN) QCOMPARE(process.write("abc\0", 4), qint64(4)); #endif exitCode = exec(); } protected slots: inline void catchExitCode(int exitCode) { this->exitCode = exitCode; exit(exitCode); } private: int exitCode; }; //----------------------------------------------------------------------------- void tst_QProcess::processInAThread() { for (int i = 0; i < 10; ++i) { TestThread thread; thread.start(); QVERIFY(thread.wait(10000)); QCOMPARE(thread.code(), 0); } } //----------------------------------------------------------------------------- void tst_QProcess::processesInMultipleThreads() { #if defined(Q_OS_SYMBIAN) int serialCounter = 0; #endif for (int i = 0; i < 10; ++i) { TestThread thread1; TestThread thread2; TestThread thread3; #if defined(Q_OS_SYMBIAN) thread1.serial = serialCounter++; thread2.serial = serialCounter++; thread3.serial = serialCounter++; #endif thread1.start(); thread2.start(); thread3.start(); QVERIFY(thread2.wait(10000)); QVERIFY(thread3.wait(10000)); QVERIFY(thread1.wait(10000)); QCOMPARE(thread1.code(), 0); QCOMPARE(thread2.code(), 0); QCOMPARE(thread3.code(), 0); } } //----------------------------------------------------------------------------- void tst_QProcess::waitForFinishedWithTimeout() { #if defined(Q_OS_SYMBIAN) const int timeOutMs = 50; #else const int timeOutMs = 5000; #endif #ifdef Q_OS_WINCE QSKIP("Reading and writing to a process is not supported on Qt/CE", SkipAll); #endif process = new QProcess(this); #ifdef Q_OS_MAC const QString binary = QLatin1String("testProcessEcho/testProcessEcho.app"); #elif defined(Q_OS_SYMBIAN) const QString binary = QLatin1String("testProcessOutput"); #else const QString binary = QLatin1String("testProcessEcho/testProcessEcho"); #endif process->start(binary); QVERIFY2(process->waitForStarted(timeOutMs), msgStartProcessFailed(binary, process->errorString()).constData()); #if defined(Q_OS_SYMBIAN) QVERIFY(!process->waitForFinished(1)); #else QVERIFY(!process->waitForFinished(1)); process->write("", 1); #endif QVERIFY(process->waitForFinished()); delete process; process = 0; } //----------------------------------------------------------------------------- void tst_QProcess::waitForReadyReadInAReadyReadSlot() { #ifdef Q_OS_WINCE QSKIP("Reading and writing to a process is not supported on Qt/CE", SkipAll); #endif #if defined(Q_OS_SYMBIAN) QSKIP("Reading and writing to a process is not supported on Qt/Symbian", SkipAll); #endif process = new QProcess(this); connect(process, SIGNAL(readyRead()), this, SLOT(waitForReadyReadInAReadyReadSlotSlot())); connect(process, SIGNAL(finished(int)), this, SLOT(exitLoopSlot())); bytesAvailable = 0; #ifdef Q_OS_MAC const QString binary = QLatin1String("testProcessEcho/testProcessEcho.app"); #else const QString binary = QLatin1String("testProcessEcho/testProcessEcho"); #endif process->start(binary); QVERIFY2(process->waitForStarted(5000), msgStartProcessFailed(binary, process->errorString()).constData()); QSignalSpy spy(process, SIGNAL(readyRead())); process->write("foo"); QTestEventLoop::instance().enterLoop(30); QVERIFY(!QTestEventLoop::instance().timeout()); QCOMPARE(spy.count(), 1); process->disconnect(); QVERIFY(process->waitForFinished(5000)); QVERIFY(process->bytesAvailable() > bytesAvailable); delete process; process = 0; } //----------------------------------------------------------------------------- void tst_QProcess::waitForReadyReadInAReadyReadSlotSlot() { #ifdef Q_OS_WINCE QSKIP("Reading and writing to a process is not supported on Qt/CE", SkipAll); #endif #if defined(Q_OS_SYMBIAN) QSKIP("Reading and writing to a process is not supported on Qt/Symbian", SkipAll); #endif bytesAvailable = process->bytesAvailable(); process->write("bar", 4); QVERIFY(process->waitForReadyRead(5000)); QTestEventLoop::instance().exitLoop(); } //----------------------------------------------------------------------------- void tst_QProcess::waitForBytesWrittenInABytesWrittenSlot() { #ifdef Q_OS_WINCE QSKIP("Reading and writing to a process is not supported on Qt/CE", SkipAll); #endif #if defined(Q_OS_SYMBIAN) QSKIP("Reading and writing to a process is not supported on Qt/Symbian", SkipAll); #endif process = new QProcess(this); connect(process, SIGNAL(bytesWritten(qint64)), this, SLOT(waitForBytesWrittenInABytesWrittenSlotSlot())); bytesAvailable = 0; #ifdef Q_OS_MAC const QString binary = QLatin1String("testProcessEcho/testProcessEcho.app"); #else const QString binary = QLatin1String("testProcessEcho/testProcessEcho"); #endif process->start(binary); QVERIFY2(process->waitForStarted(5000), msgStartProcessFailed(binary, process->errorString()).constData()); qRegisterMetaType("qint64"); QSignalSpy spy(process, SIGNAL(bytesWritten(qint64))); process->write("f"); QTestEventLoop::instance().enterLoop(30); QVERIFY(!QTestEventLoop::instance().timeout()); QCOMPARE(spy.count(), 1); process->write("", 1); process->disconnect(); QVERIFY(process->waitForFinished()); delete process; process = 0; } //----------------------------------------------------------------------------- void tst_QProcess::waitForBytesWrittenInABytesWrittenSlotSlot() { #ifdef Q_OS_WINCE QSKIP("Reading and writing to a process is not supported on Qt/CE", SkipAll); #endif #if defined(Q_OS_SYMBIAN) QSKIP("Reading and writing to a process is not supported on Qt/Symbian", SkipAll); #endif process->write("b"); QVERIFY(process->waitForBytesWritten(5000)); QTestEventLoop::instance().exitLoop(); } //----------------------------------------------------------------------------- void tst_QProcess::spaceArgsTest_data() { QTest::addColumn("args"); QTest::addColumn("stringArgs"); // arg1 | arg2 QTest::newRow("arg1 arg2") << (QStringList() << QString::fromLatin1("arg1") << QString::fromLatin1("arg2")) << QString::fromLatin1("arg1 arg2"); // "arg1" | ar "g2 QTest::newRow("\"\"\"\"arg1\"\"\"\" \"ar \"\"\"g2\"") << (QStringList() << QString::fromLatin1("\"arg1\"") << QString::fromLatin1("ar \"g2")) << QString::fromLatin1("\"\"\"\"arg1\"\"\"\" \"ar \"\"\"g2\""); // ar g1 | a rg 2 QTest::newRow("\"ar g1\" \"a rg 2\"") << (QStringList() << QString::fromLatin1("ar g1") << QString::fromLatin1("a rg 2")) << QString::fromLatin1("\"ar g1\" \"a rg 2\""); // -lar g1 | -l"ar g2" QTest::newRow("\"-lar g1\" \"-l\"\"\"ar g2\"\"\"\"") << (QStringList() << QString::fromLatin1("-lar g1") << QString::fromLatin1("-l\"ar g2\"")) << QString::fromLatin1("\"-lar g1\" \"-l\"\"\"ar g2\"\"\"\""); // ar"g1 QTest::newRow("ar\"\"\"\"g1") << (QStringList() << QString::fromLatin1("ar\"g1")) << QString::fromLatin1("ar\"\"\"\"g1"); // ar/g1 QTest::newRow("ar\\g1") << (QStringList() << QString::fromLatin1("ar\\g1")) << QString::fromLatin1("ar\\g1"); // ar\g"1 QTest::newRow("ar\\g\"\"\"\"1") << (QStringList() << QString::fromLatin1("ar\\g\"1")) << QString::fromLatin1("ar\\g\"\"\"\"1"); // arg\"1 QTest::newRow("arg\\\"\"\"1") << (QStringList() << QString::fromLatin1("arg\\\"1")) << QString::fromLatin1("arg\\\"\"\"1"); // """" QTest::newRow("\"\"\"\"\"\"\"\"\"\"\"\"") << (QStringList() << QString::fromLatin1("\"\"\"\"")) << QString::fromLatin1("\"\"\"\"\"\"\"\"\"\"\"\""); // """" | "" "" QTest::newRow("\"\"\"\"\"\"\"\"\"\"\"\" \"\"\"\"\"\"\" \"\"\"\"\"\"\"") << (QStringList() << QString::fromLatin1("\"\"\"\"") << QString::fromLatin1("\"\" \"\"")) << QString::fromLatin1("\"\"\"\"\"\"\"\"\"\"\"\" \"\"\"\"\"\"\" \"\"\"\"\"\"\""); // "" "" QTest::newRow("\"\"\"\"\"\"\" \"\" \"\"\"\"\"\"\" (bogus double quotes)") << (QStringList() << QString::fromLatin1("\"\" \"\"")) << QString::fromLatin1("\"\"\"\"\"\"\" \"\" \"\"\"\"\"\"\""); // "" "" QTest::newRow(" \"\"\"\"\"\"\" \"\" \"\"\"\"\"\"\" (bogus double quotes)") << (QStringList() << QString::fromLatin1("\"\" \"\"")) << QString::fromLatin1(" \"\"\"\"\"\"\" \"\" \"\"\"\"\"\"\" "); } //----------------------------------------------------------------------------- void tst_QProcess::spaceArgsTest() { QFETCH(QStringList, args); QFETCH(QString, stringArgs); #if !defined(Q_OS_WINCE) && !defined(Q_OS_SYMBIAN) const int timeOutMs = 5000; #else const int timeOutMs = 10000; #endif QStringList programs; programs << QString::fromLatin1("testProcessSpacesArgs/nospace") #if defined(Q_OS_SYMBIAN) ; // Symbian toolchain doesn't like exes with spaces in the name #else << QString::fromLatin1("testProcessSpacesArgs/one space") << QString::fromLatin1("testProcessSpacesArgs/two space s"); #endif process = new QProcess(this); for (int i = 0; i < programs.size(); ++i) { QString program = programs.at(i); process->start(program, args); QVERIFY2(process->waitForStarted(timeOutMs), msgStartProcessFailed(program, process->errorString()).constData()); #if !defined(Q_OS_WINCE) && !defined(Q_OS_SYMBIAN) QVERIFY(process->waitForFinished(5000)); #else QVERIFY(process->waitForFinished(10000)); #endif #if defined(Q_OS_SYMBIAN) // Symbian test outputs to a file, so check that FILE* file = fopen("c:\\logs\\qprocess_args_test.txt","r"); QVERIFY(file); char buf[256]; fgets(buf, 256, file); fclose(file); QStringList actual = QString::fromLatin1(buf).split("|"); #elif !defined(Q_OS_WINCE) QStringList actual = QString::fromLatin1(process->readAll()).split("|"); #endif #if !defined(Q_OS_WINCE) QVERIFY(!actual.isEmpty()); // not interested in the program name, it might be different. actual.removeFirst(); QCOMPARE(actual, args); #endif if (program.contains(" ")) program = "\"" + program + "\""; if (!stringArgs.isEmpty()) program += QString::fromLatin1(" ") + stringArgs; process->start(program); QVERIFY2(process->waitForStarted(5000), msgStartProcessFailed(program, process->errorString()).constData()); QVERIFY(process->waitForFinished(5000)); #if defined(Q_OS_SYMBIAN) // Symbian test outputs to a file, so check that file = fopen("c:\\logs\\qprocess_args_test.txt","r"); QVERIFY(file); fgets(buf, 256, file); fclose(file); actual = QString::fromLatin1(buf).split("|"); #elif !defined(Q_OS_WINCE) actual = QString::fromLatin1(process->readAll()).split("|"); #endif #if !defined(Q_OS_WINCE) QVERIFY(!actual.isEmpty()); // not interested in the program name, it might be different. actual.removeFirst(); QCOMPARE(actual, args); #endif } delete process; process = 0; } #if defined(Q_OS_WIN) || defined(Q_OS_SYMBIAN) //----------------------------------------------------------------------------- void tst_QProcess::nativeArguments() { #if !defined(Q_OS_WINCE) && !defined(Q_OS_SYMBIAN) const int timeOutMs = 5000; #else const int timeOutMs = 10000; #endif QProcess proc; // This doesn't actually need special quoting, so it is pointless to use // native arguments here, but that's not the point of this test. proc.setNativeArguments("hello kitty, \"*\"!"); const QString binary = QString::fromLatin1("testProcessSpacesArgs/nospace"); proc.start(binary, QStringList()); QVERIFY2(proc.waitForStarted(timeOutMs), msgStartProcessFailed(binary, proc.errorString()).constData()); #if !defined(Q_OS_WINCE) && !defined(Q_OS_SYMBIAN) QVERIFY(proc.waitForFinished(5000)); #else QVERIFY(proc.waitForFinished(10000)); #endif #if defined(Q_OS_SYMBIAN) || defined(Q_OS_WINCE) // Symbian test outputs to a file, so check that # ifdef Q_OS_SYMBIAN FILE* file = fopen("c:\\logs\\qprocess_args_test.txt","r"); # else FILE* file = fopen("\\temp\\qprocess_args_test.txt","r"); # endif QVERIFY(file); char buf[256]; fgets(buf, 256, file); fclose(file); QStringList actual = QString::fromLatin1(buf).split("|"); #else QStringList actual = QString::fromLatin1(proc.readAll()).split("|"); #endif QVERIFY(!actual.isEmpty()); // not interested in the program name, it might be different. actual.removeFirst(); QStringList expected; #if defined(Q_OS_WINCE) expected << "hello" << "kitty," << "\"*\"!"; // Weird, weird ... #else expected << "hello" << "kitty," << "*!"; #endif QCOMPARE(actual, expected); } #endif //----------------------------------------------------------------------------- void tst_QProcess::exitCodeTest() { #if defined(Q_OS_SYMBIAN) // Kernel will run out of process handles on some hw, as there is some // delay before they are recycled, so limit the amount of processes. for (int i = 0; i < 50; ++i) { #else for (int i = 0; i < 255; ++i) { #endif QProcess process; const QString binary = QLatin1String("testExitCodes/testExitCodes"); process.start(binary, QStringList(QString::number(i))); QVERIFY2(process.waitForStarted(5000), msgStartProcessFailed(binary, process.errorString()).constData()); QVERIFY(process.waitForFinished(5000)); QCOMPARE(process.exitCode(), i); QCOMPARE(process.error(), QProcess::UnknownError); } } //----------------------------------------------------------------------------- void tst_QProcess::failToStart() { qRegisterMetaType("QProcess::ProcessError"); qRegisterMetaType("QProcess::ExitStatus"); qRegisterMetaType("QProcess::ProcessState"); QProcess process; QSignalSpy stateSpy(&process, SIGNAL(stateChanged(QProcess::ProcessState))); QSignalSpy errorSpy(&process, SIGNAL(error(QProcess::ProcessError))); QSignalSpy finishedSpy(&process, SIGNAL(finished(int))); QSignalSpy finishedSpy2(&process, SIGNAL(finished(int, QProcess::ExitStatus))); // Mac OS X and HP-UX have a really low default process limit (~100), so spawning // to many processes here will cause test failures later on. #if defined Q_OS_HPUX const int attempts = 15; #elif defined Q_OS_MAC const int attempts = 15; #else const int attempts = 50; #endif for (int j = 0; j < 8; ++j) { for (int i = 0; i < attempts; ++i) { QCOMPARE(errorSpy.count(), j * attempts + i); process.start("/blurp"); switch (j) { case 0: case 1: QVERIFY(!process.waitForStarted()); break; case 2: case 3: QVERIFY(!process.waitForFinished()); break; case 4: case 5: QVERIFY(!process.waitForReadyRead()); break; case 6: case 7: default: QVERIFY(!process.waitForBytesWritten()); break; } QCOMPARE(process.error(), QProcess::FailedToStart); QCOMPARE(errorSpy.count(), j * attempts + i + 1); QCOMPARE(finishedSpy.count(), 0); QCOMPARE(finishedSpy2.count(), 0); int it = j * attempts + i + 1; QCOMPARE(stateSpy.count(), it * 2); QCOMPARE(qVariantValue(stateSpy.at(it * 2 - 2).at(0)), QProcess::Starting); QCOMPARE(qVariantValue(stateSpy.at(it * 2 - 1).at(0)), QProcess::NotRunning); } } } //----------------------------------------------------------------------------- void tst_QProcess::failToStartWithWait() { qRegisterMetaType("QProcess::ProcessError"); qRegisterMetaType("QProcess::ExitStatus"); QProcess process; QEventLoop loop; QSignalSpy errorSpy(&process, SIGNAL(error(QProcess::ProcessError))); QSignalSpy finishedSpy(&process, SIGNAL(finished(int))); QSignalSpy finishedSpy2(&process, SIGNAL(finished(int, QProcess::ExitStatus))); for (int i = 0; i < 50; ++i) { process.start("/blurp", QStringList() << "-v" << "-debug"); process.waitForStarted(); QCOMPARE(process.error(), QProcess::FailedToStart); QCOMPARE(errorSpy.count(), i + 1); QCOMPARE(finishedSpy.count(), 0); QCOMPARE(finishedSpy2.count(), 0); } } //----------------------------------------------------------------------------- void tst_QProcess::failToStartWithEventLoop() { qRegisterMetaType("QProcess::ProcessError"); qRegisterMetaType("QProcess::ExitStatus"); QProcess process; QEventLoop loop; QSignalSpy errorSpy(&process, SIGNAL(error(QProcess::ProcessError))); QSignalSpy finishedSpy(&process, SIGNAL(finished(int))); QSignalSpy finishedSpy2(&process, SIGNAL(finished(int, QProcess::ExitStatus))); // The error signal may be emitted before start() returns connect(&process, SIGNAL(error(QProcess::ProcessError)), &loop, SLOT(quit()), Qt::QueuedConnection); for (int i = 0; i < 50; ++i) { process.start("/blurp", QStringList() << "-v" << "-debug"); loop.exec(); QCOMPARE(process.error(), QProcess::FailedToStart); QCOMPARE(errorSpy.count(), i + 1); QCOMPARE(finishedSpy.count(), 0); QCOMPARE(finishedSpy2.count(), 0); } } //----------------------------------------------------------------------------- void tst_QProcess::removeFileWhileProcessIsRunning() { #ifdef Q_OS_WINCE QSKIP("Reading and writing to a process is not supported on Qt/CE", SkipAll); #endif #if defined(Q_OS_SYMBIAN) QSKIP("Reading and writing to a process is not supported on Qt/Symbian", SkipAll); #endif QFile file("removeFile.txt"); QVERIFY(file.open(QFile::WriteOnly)); QProcess process; #ifdef Q_OS_MAC const QString binary = QLatin1String("testProcessEcho/testProcessEcho.app"); #else const QString binary = QLatin1String("testProcessEcho/testProcessEcho"); #endif process.start(binary); QVERIFY2(process.waitForStarted(5000), msgStartProcessFailed(binary, process.errorString()).constData()); QVERIFY(file.remove()); process.write("", 1); QVERIFY(process.waitForFinished(5000)); } //----------------------------------------------------------------------------- void tst_QProcess::setEnvironment_data() { QTest::addColumn("name"); QTest::addColumn("value"); QTest::newRow("setting-empty") << "tst_QProcess" << ""; QTest::newRow("setting") << "tst_QProcess" << "value"; #ifdef Q_OS_WIN QTest::newRow("unsetting") << "PROMPT" << QString(); QTest::newRow("overriding") << "PROMPT" << "value"; #else QTest::newRow("unsetting") << "PATH" << QString(); QTest::newRow("overriding") << "PATH" << "value"; #endif } void tst_QProcess::setEnvironment() { #if defined (Q_OS_WINCE) || defined(Q_OS_SYMBIAN) QSKIP("OS doesn't support environment variables", SkipAll); #endif // make sure our environment variables are correct QVERIFY(qgetenv("tst_QProcess").isEmpty()); QVERIFY(!qgetenv("PATH").isEmpty()); #ifdef Q_OS_WIN QVERIFY(!qgetenv("PROMPT").isEmpty()); #endif QFETCH(QString, name); QFETCH(QString, value); QString executable = QDir::currentPath() + "/testProcessEnvironment/testProcessEnvironment"; { QProcess process; QStringList environment = QProcess::systemEnvironment(); if (value.isNull()) { int pos; QRegExp rx(name + "=.*"); #ifdef Q_OS_WIN rx.setCaseSensitivity(Qt::CaseInsensitive); #endif while ((pos = environment.indexOf(rx)) != -1) environment.removeAt(pos); } else { environment.append(name + '=' + value); } process.setEnvironment(environment); process.start(executable, QStringList() << name); QVERIFY2(process.waitForStarted(5000), msgStartProcessFailed(executable, process.errorString()).constData()); QVERIFY(process.waitForFinished()); if (value.isNull()) QCOMPARE(process.exitCode(), 1); else if (!value.isEmpty()) QCOMPARE(process.exitCode(), 0); QCOMPARE(process.readAll(), value.toLocal8Bit()); } // re-do the test but set the environment twice, to make sure // that the latter addition overrides // this test doesn't make sense in unsetting if (!value.isNull()) { QProcess process; QStringList environment = QProcess::systemEnvironment(); environment.prepend(name + "=This is not the right value"); environment.append(name + '=' + value); process.setEnvironment(environment); process.start(executable, QStringList() << name); QVERIFY2(process.waitForStarted(5000), msgStartProcessFailed(executable, process.errorString()).constData()); QVERIFY(process.waitForFinished()); if (!value.isEmpty()) QCOMPARE(process.exitCode(), 0); QCOMPARE(process.readAll(), value.toLocal8Bit()); } } //----------------------------------------------------------------------------- void tst_QProcess::setProcessEnvironment_data() { setEnvironment_data(); } void tst_QProcess::setProcessEnvironment() { #if defined (Q_OS_WINCE) || defined(Q_OS_SYMBIAN) QSKIP("OS doesn't support environment variables", SkipAll); #endif // make sure our environment variables are correct QVERIFY(qgetenv("tst_QProcess").isEmpty()); QVERIFY(!qgetenv("PATH").isEmpty()); #ifdef Q_OS_WIN QVERIFY(!qgetenv("PROMPT").isEmpty()); #endif QFETCH(QString, name); QFETCH(QString, value); QString executable = QDir::currentPath() + "/testProcessEnvironment/testProcessEnvironment"; { QProcess process; QProcessEnvironment environment = QProcessEnvironment::systemEnvironment(); if (value.isNull()) environment.remove(name); else environment.insert(name, value); process.setProcessEnvironment(environment); process.start(executable, QStringList() << name); QVERIFY2(process.waitForStarted(5000), msgStartProcessFailed(executable, process.errorString()).constData()); QVERIFY(process.waitForFinished()); if (value.isNull()) QCOMPARE(process.exitCode(), 1); else if (!value.isEmpty()) QCOMPARE(process.exitCode(), 0); QCOMPARE(process.readAll(), value.toLocal8Bit()); } } //----------------------------------------------------------------------------- void tst_QProcess::systemEnvironment() { #if defined (Q_OS_WINCE) || defined(Q_OS_SYMBIAN) // there is no concept of system variables on Windows CE as there is no console QVERIFY(QProcess::systemEnvironment().isEmpty()); QVERIFY(QProcessEnvironment::systemEnvironment().isEmpty()); #else QVERIFY(!QProcess::systemEnvironment().isEmpty()); QVERIFY(!QProcessEnvironment::systemEnvironment().isEmpty()); QVERIFY(QProcessEnvironment::systemEnvironment().contains("PATH")); QVERIFY(!QProcess::systemEnvironment().filter(QRegExp("^PATH=", Qt::CaseInsensitive)).isEmpty()); #endif } //----------------------------------------------------------------------------- void tst_QProcess::spaceInName() { #ifdef Q_OS_WINCE QSKIP("Reading and writing to a process is not supported on Qt/CE", SkipAll); #endif #if defined(Q_OS_SYMBIAN) QSKIP("Reading and writing to a process is not supported on Qt/Symbian", SkipAll); #endif QProcess process; const QString binary = QLatin1String("test Space In Name/testSpaceInName"); process.start(binary, QStringList()); QVERIFY2(process.waitForStarted(), msgStartProcessFailed(binary, process.errorString()).constData()); process.write("", 1); QVERIFY(process.waitForFinished()); } //----------------------------------------------------------------------------- void tst_QProcess::lockupsInStartDetached() { #if !defined(Q_OS_SYMBIAN) // Check that QProcess doesn't cause a lock up at this program's // exit if a thread was started and we tried to run a program that // doesn't exist. Before Qt 4.2, this used to lock up on Unix due // to calling ::exit instead of ::_exit if execve failed. QHostInfo::lookupHost(QString("something.invalid"), 0, 0); QProcess::execute("yjhbrty"); QProcess::startDetached("yjhbrty"); #endif } //----------------------------------------------------------------------------- void tst_QProcess::atEnd2() { #ifdef Q_OS_WINCE QSKIP("Reading and writing to a process is not supported on Qt/CE", SkipAll); #endif #if defined(Q_OS_SYMBIAN) QSKIP("Reading and writing to a process is not supported on Qt/Symbian", SkipAll); #endif QProcess process; #ifdef Q_OS_MAC const QString binary = QLatin1String("testProcessEcho/testProcessEcho.app"); #else const QString binary = QLatin1String("testProcessEcho/testProcessEcho"); #endif process.start(binary); QVERIFY2(process.waitForStarted(), msgStartProcessFailed(binary, process.errorString()).constData()); process.write("Foo\nBar\nBaz\nBodukon\nHadukan\nTorwukan\nend\n"); process.putChar('\0'); QVERIFY(process.waitForFinished()); QList lines; while (!process.atEnd()) { lines << process.readLine(); } QCOMPARE(lines.size(), 7); } //----------------------------------------------------------------------------- void tst_QProcess::waitForReadyReadForNonexistantProcess() { // This comes from task 108968 // Start a program that doesn't exist, process events and then try to waitForReadyRead qRegisterMetaType("QProcess::ProcessError"); qRegisterMetaType("QProcess::ExitStatus"); QProcess process; QSignalSpy errorSpy(&process, SIGNAL(error(QProcess::ProcessError))); QSignalSpy finishedSpy1(&process, SIGNAL(finished(int))); QSignalSpy finishedSpy2(&process, SIGNAL(finished(int, QProcess::ExitStatus))); QVERIFY(!process.waitForReadyRead()); // used to crash process.start("doesntexist"); QVERIFY(!process.waitForReadyRead()); QCOMPARE(errorSpy.count(), 1); QCOMPARE(errorSpy.at(0).at(0).toInt(), 0); QCOMPARE(finishedSpy1.count(), 0); QCOMPARE(finishedSpy2.count(), 0); } //----------------------------------------------------------------------------- void tst_QProcess::setStandardInputFile() { #ifdef Q_OS_WINCE QSKIP("Reading and writing to a process is not supported on Qt/CE", SkipAll); #endif #if defined(Q_OS_SYMBIAN) QSKIP("Reading and writing to a process is not supported on Qt/Symbian", SkipAll); #endif static const char data[] = "A bunch\1of\2data\3\4\5\6\7..."; QProcess process; QFile file("data"); QVERIFY(file.open(QIODevice::WriteOnly)); file.write(data, sizeof data); file.close(); process.setStandardInputFile("data"); #ifdef Q_OS_MAC const QString binary = QLatin1String("testProcessEcho/testProcessEcho.app"); #else const QString binary = QLatin1String("testProcessEcho/testProcessEcho"); #endif process.start(binary); QVERIFY2(process.waitForStarted(), msgStartProcessFailed(binary, process.errorString()).constData()); QPROCESS_VERIFY(process, waitForFinished()); QByteArray all = process.readAll(); QCOMPARE(all.size(), int(sizeof data) - 1); // testProcessEcho drops the ending \0 QVERIFY(all == data); } //----------------------------------------------------------------------------- void tst_QProcess::setStandardOutputFile_data() { QTest::addColumn("channelToTest"); QTest::addColumn("_channelMode"); QTest::addColumn("append"); QTest::newRow("stdout-truncate") << int(QProcess::StandardOutput) << int(QProcess::SeparateChannels) << false; QTest::newRow("stdout-append") << int(QProcess::StandardOutput) << int(QProcess::SeparateChannels) << true; QTest::newRow("stderr-truncate") << int(QProcess::StandardError) << int(QProcess::SeparateChannels) << false; QTest::newRow("stderr-append") << int(QProcess::StandardError) << int(QProcess::SeparateChannels) << true; QTest::newRow("merged-truncate") << int(QProcess::StandardOutput) << int(QProcess::MergedChannels) << false; QTest::newRow("merged-append") << int(QProcess::StandardOutput) << int(QProcess::MergedChannels) << true; } void tst_QProcess::setStandardOutputFile() { #ifdef Q_OS_WINCE QSKIP("Reading and writing to a process is not supported on Qt/CE", SkipAll); #endif #if defined(Q_OS_SYMBIAN) QSKIP("Reading and writing to a process is not supported on Qt/Symbian", SkipAll); #endif static const char data[] = "Original data. "; static const char testdata[] = "Test data."; QFETCH(int, channelToTest); QFETCH(int, _channelMode); QFETCH(bool, append); QProcess::ProcessChannelMode channelMode = QProcess::ProcessChannelMode(_channelMode); QIODevice::OpenMode mode = append ? QIODevice::Append : QIODevice::Truncate; // create the destination file with data QFile file("data"); QVERIFY(file.open(QIODevice::WriteOnly)); file.write(data, sizeof data - 1); file.close(); // run the process QProcess process; process.setReadChannelMode(channelMode); if (channelToTest == QProcess::StandardOutput) process.setStandardOutputFile("data", mode); else process.setStandardErrorFile("data", mode); #ifdef Q_OS_MAC const QString binary = QLatin1String("testProcessEcho2/testProcessEcho2.app"); #else const QString binary = QLatin1String("testProcessEcho2/testProcessEcho2"); #endif process.start(binary); QVERIFY2(process.waitForStarted(), msgStartProcessFailed(binary, process.errorString()).constData()); process.write(testdata, sizeof testdata); QPROCESS_VERIFY(process,waitForFinished()); // open the file again and verify the data QVERIFY(file.open(QIODevice::ReadOnly)); QByteArray all = file.readAll(); file.close(); int expectedsize = sizeof testdata - 1; if (mode == QIODevice::Append) { QVERIFY(all.startsWith(data)); expectedsize += sizeof data - 1; } if (channelMode == QProcess::MergedChannels) { expectedsize += sizeof testdata - 1; } else { QVERIFY(all.endsWith(testdata)); } QCOMPARE(all.size(), expectedsize); } //----------------------------------------------------------------------------- void tst_QProcess::setStandardOutputProcess_data() { QTest::addColumn("merged"); QTest::newRow("separate") << false; QTest::newRow("merged") << true; } void tst_QProcess::setStandardOutputProcess() { #ifdef Q_OS_WINCE QSKIP("Reading and writing to a process is not supported on Qt/CE", SkipAll); #endif #if defined(Q_OS_SYMBIAN) QSKIP("Reading and writing to a process is not supported on Qt/Symbian", SkipAll); #endif QProcess source; QProcess sink; QFETCH(bool, merged); source.setReadChannelMode(merged ? QProcess::MergedChannels : QProcess::SeparateChannels); source.setStandardOutputProcess(&sink); #ifdef Q_OS_MAC const QString sourceBinary = QLatin1String("testProcessEcho2/testProcessEcho2.app"); const QString sinkBinary = QLatin1String("testProcessEcho2/testProcessEcho2.app"); #else const QString sourceBinary = QLatin1String("testProcessEcho2/testProcessEcho2"); const QString sinkBinary = QLatin1String("testProcessEcho2/testProcessEcho2"); #endif source.start(sourceBinary); QVERIFY2(source.waitForStarted(), msgStartProcessFailed(sourceBinary, source.errorString()).constData()); sink.start(sinkBinary); QVERIFY2(sink.waitForStarted(), msgStartProcessFailed(sinkBinary, sink.errorString()).constData()); QByteArray data("Hello, World"); source.write(data); source.closeWriteChannel(); QPROCESS_VERIFY(source, waitForFinished()); QPROCESS_VERIFY(sink, waitForFinished()); QByteArray all = sink.readAll(); if (!merged) QCOMPARE(all, data); else QCOMPARE(all, QByteArray("HHeelllloo,, WWoorrlldd")); } //----------------------------------------------------------------------------- void tst_QProcess::fileWriterProcess() { #ifdef Q_OS_WINCE QSKIP("Reading and writing to a process is not supported on Qt/CE", SkipAll); #endif #if defined(Q_OS_SYMBIAN) QSKIP("Reading and writing to a process is not supported on Qt/Symbian", SkipAll); #endif QString stdinStr; for (int i = 0; i < 5000; ++i) stdinStr += QString::fromLatin1("%1 -- testing testing 1 2 3\n").arg(i); QTime stopWatch; stopWatch.start(); do { QFile::remove("fileWriterProcess.txt"); QProcess process; const QString binary = QLatin1String("fileWriterProcess/fileWriterProcess"); process.start(binary, QIODevice::ReadWrite | QIODevice::Text); QVERIFY2(process.waitForStarted(), msgStartProcessFailed(binary, process.errorString()).constData()); process.write(stdinStr.toLatin1()); process.closeWriteChannel(); while (process.bytesToWrite()) { QVERIFY(stopWatch.elapsed() < 3500); QVERIFY(process.waitForBytesWritten(2000)); } QVERIFY(process.waitForFinished()); QCOMPARE(QFile("fileWriterProcess.txt").size(), qint64(stdinStr.size())); } while (stopWatch.elapsed() < 3000); } //----------------------------------------------------------------------------- void tst_QProcess::detachedWorkingDirectoryAndPid() { #if defined(Q_OS_SYMBIAN) && defined(Q_CC_NOKIAX86) // WINSCW builds in Symbian do not allow multiple processes to load Qt libraries, // so this test must be skipped. QSKIP("Multiple processes loading Qt are not allowed in Qt/Symbian emulator.", SkipAll); #endif qint64 pid; #ifdef Q_OS_WINCE QTest::qSleep(1000); #endif #if defined(Q_OS_SYMBIAN) // Symbian has no working directory support, so use logs dir as a shared directory QFile infoFile(QLatin1String("c:\\logs\\detachedinfo.txt")); #else QFile infoFile(QDir::currentPath() + QLatin1String("/detachedinfo.txt")); #endif infoFile.remove(); QString workingDir = QDir::currentPath() + "/testDetached"; #ifndef Q_OS_SYMBIAN QVERIFY(QFile::exists(workingDir)); #endif QStringList args; args << infoFile.fileName(); QVERIFY(QProcess::startDetached(QDir::currentPath() + QLatin1String("/testDetached/testDetached"), args, workingDir, &pid)); QFileInfo fi(infoFile); fi.setCaching(false); //The guard counter ensures the test does not hang if the sub process fails. //Instead, the test will fail when trying to open & verify the sub process output file. for (int guard = 0; guard < 100 && fi.size() == 0; guard++) { QTest::qSleep(100); } QVERIFY(infoFile.open(QIODevice::ReadOnly | QIODevice::Text)); QString actualWorkingDir = QString::fromUtf8(infoFile.readLine()); actualWorkingDir.chop(1); // strip off newline QByteArray processIdString = infoFile.readLine(); processIdString.chop(1); infoFile.close(); infoFile.remove(); bool ok = false; qint64 actualPid = processIdString.toLongLong(&ok); QVERIFY(ok); #if defined(Q_OS_SYMBIAN) QEXPECT_FAIL("", "Working directory is not supported on Qt/symbian", Continue); #endif QCOMPARE(actualWorkingDir, workingDir); QCOMPARE(actualPid, pid); } //----------------------------------------------------------------------------- void tst_QProcess::switchReadChannels() { #ifdef Q_OS_WINCE QSKIP("Reading and writing to a process is not supported on Qt/CE", SkipAll); #endif #if defined(Q_OS_SYMBIAN) QSKIP("Reading and writing to a process is not supported on Qt/Symbian", SkipAll); #endif const char data[] = "ABCD"; QProcess process; #ifdef Q_OS_MAC const QString binary = QLatin1String("testProcessEcho2/testProcessEcho2.app"); #else const QString binary = QLatin1String("testProcessEcho2/testProcessEcho2"); #endif process.start(binary); QVERIFY2(process.waitForStarted(), msgStartProcessFailed(binary, process.errorString()).constData()); process.write(data); process.closeWriteChannel(); QVERIFY(process.waitForFinished(5000)); for (int i = 0; i < 4; ++i) { process.setReadChannel(QProcess::StandardOutput); QCOMPARE(process.read(1), QByteArray(&data[i], 1)); process.setReadChannel(QProcess::StandardError); QCOMPARE(process.read(1), QByteArray(&data[i], 1)); } process.ungetChar('D'); process.setReadChannel(QProcess::StandardOutput); process.ungetChar('D'); process.setReadChannel(QProcess::StandardError); QCOMPARE(process.read(1), QByteArray("D")); process.setReadChannel(QProcess::StandardOutput); QCOMPARE(process.read(1), QByteArray("D")); } //----------------------------------------------------------------------------- void tst_QProcess::setWorkingDirectory() { #ifdef Q_OS_WINCE QSKIP("Windows CE does not support working directory logic", SkipAll); #endif #if defined(Q_OS_SYMBIAN) QSKIP("Symbian does not support working directory logic", SkipAll); #endif process = new QProcess; process->setWorkingDirectory("test"); #ifdef Q_OS_MAC const QString binary = QLatin1String("testSetWorkingDirectory/testSetWorkingDirectory.app"); #else const QString binary = QLatin1String("testSetWorkingDirectory/testSetWorkingDirectory"); #endif #ifndef Q_OS_WIN QSKIP("setWorkingDirectory will chdir before starting the process on unices", SkipAll); #endif process->start(binary); QVERIFY2(process->waitForStarted(), msgStartProcessFailed(binary, process->errorString()).constData()); QVERIFY(process->waitForFinished()); QByteArray workingDir = process->readAllStandardOutput(); QCOMPARE(QDir("test").canonicalPath(), QDir(workingDir.constData()).canonicalPath()); delete process; process = 0; } //----------------------------------------------------------------------------- void tst_QProcess::startFinishStartFinish() { QProcess process; for (int i = 0; i < 3; ++i) { QCOMPARE(process.state(), QProcess::NotRunning); #ifdef Q_OS_MAC const QString binary = QLatin1String("testProcessOutput/testProcessOutput.app"); #else const QString binary = QLatin1String("testProcessOutput/testProcessOutput"); #endif process.start(binary); QVERIFY2(process.waitForStarted(), msgStartProcessFailed(binary, process.errorString()).constData()); #if !defined(Q_OS_WINCE) && !defined(Q_OS_SYMBIAN) QVERIFY(process.waitForReadyRead(10000)); QCOMPARE(QString::fromLatin1(process.readLine().trimmed()), QString("0 -this is a number")); #endif if (process.state() != QProcess::NotRunning) QVERIFY(process.waitForFinished(10000)); #if defined(Q_OS_SYMBIAN) // Symbian test outputs to a file, so check that FILE* file = fopen("c:\\logs\\qprocess_output_test.txt","r"); QVERIFY(file); char buf[30]; fgets(buf, 30, file); QCOMPARE(QString::fromLatin1(buf), QString("0 -this is a number\n")); fclose(file); #endif } } //----------------------------------------------------------------------------- void tst_QProcess::invalidProgramString_data() { QTest::addColumn("programString"); QTest::newRow("null string") << QString(); QTest::newRow("empty string") << QString(""); QTest::newRow("only blank string") << QString(" "); } void tst_QProcess::invalidProgramString() { QFETCH(QString, programString); QProcess process; qRegisterMetaType("QProcess::ProcessError"); QSignalSpy spy(&process, SIGNAL(error(QProcess::ProcessError))); process.start(programString); QCOMPARE(process.error(), QProcess::FailedToStart); QCOMPARE(spy.count(), 1); QVERIFY(!QProcess::startDetached(programString)); } //----------------------------------------------------------------------------- void tst_QProcess::onlyOneStartedSignal() { QProcess process; QSignalSpy spyStarted(&process, SIGNAL(started())); QSignalSpy spyFinished(&process, SIGNAL(finished(int, QProcess::ExitStatus))); const QString binary = QLatin1String("testProcessNormal/testProcessNormal"); process.start(binary); QVERIFY2(process.waitForStarted(), msgStartProcessFailed(binary, process.errorString()).constData()); QVERIFY(process.waitForStarted(5000)); QVERIFY(process.waitForFinished(5000)); QCOMPARE(spyStarted.count(), 1); QCOMPARE(spyFinished.count(), 1); spyStarted.clear(); spyFinished.clear(); process.start(binary); QVERIFY(process.waitForStarted(5000)); QVERIFY(process.waitForFinished(5000)); QCOMPARE(spyStarted.count(), 1); QCOMPARE(spyFinished.count(), 1); } void tst_QProcess::waitForStartedWithoutStart() { QProcess process; QVERIFY(!process.waitForStarted(5000)); } QTEST_MAIN(tst_QProcess) #include "tst_qprocess.moc" #endif