AudioOutput <html>The audio playback device %1 does not work. Falling back to %2.</html> <html>Switching to the audio playback device %1 which just became available and has higher preference.</html> Revert back to device '%1' CloseButton Close Tab PPDOptionsModel Name Имя Phonon:: Notifications Music Video Communication Games Accessibility Phonon::Gstreamer::Backend Warning: You do not seem to have the package gstreamer0.10-plugins-good installed. Some video features have been disabled. Warning: You do not seem to have the base GStreamer plugins installed. All audio and video support has been disabled Phonon::Gstreamer::MediaObject Cannot start playback. Check your Gstreamer installation and make sure you have libgstreamer-plugins-base installed. A required codec is missing. You need to install the following codec(s) to play this content: %0 Could not open media source. Invalid source type. Could not locate media source. Could not open audio device. The device is already in use. Could not decode media source. Phonon::VolumeSlider Volume: %1% Use this slider to adjust the volume. The leftmost position is 0%, the rightmost is %1% Q3Accel %1, %2 not defined Ambiguous %1 not handled Q3DataTable True True False False Insert Вставить Update Обновить Delete Удалить Q3FileDialog Copy or Move a File Копировать или переместить файл Read: %1 Открытие: %1 Write: %1 Запись: %1 Cancel Отмена All Files (*) Все файлы (*) Name Имя Size Размер Type Тип Date Дата Attributes Атрибуты &OK &OK Look &in: &Смотреть в: File &name: &Имя файла: File &type: &Тип файла: Back Назад One directory up Вверх на один уровень Create New Folder Создать новый каталог List View Список Detail View Детальный вид Preview File Info Предпросмотр информации о файле Preview File Contents Предпросмотр содержимого файла Read-write Чтение-запись Read-only Только чтение Write-only Только запись Inaccessible Нет доступа Symlink to File Ссылка на файл Symlink to Directory Ссылка на каталог Symlink to Special Ссылка на спецфайл File Файл Dir Каталог Special Спецфайл Open Открыть Save As Сохранить как &Open &Открыть &Save &Сохранить &Rename &Переименовать &Delete &Удалить R&eload О&бновить Sort by &Name По &имени Sort by &Size По &размеру Sort by &Date По &дате &Unsorted &Не упорядочивать Sort Упорядочить Show &hidden files Показать &скрытые файлы the file файл the directory каталог the symlink ссылку Delete %1 Удалить %1 <qt>Are you sure you wish to delete %1 "%2"?</qt> <qt>Вы действительно хотите удалить %1 "%2"?</qt> &Yes &Да &No &Нет New Folder 1 Новый каталог 1 New Folder Новый каталог New Folder %1 Новый каталог %1 Find Directory Найти каталог Directories Каталоги Directory: Каталог: Error Ошибка %1 File not found. Check path and filename. %1 Файл не найден. Проверьте правильность пути и имени файла. All Files (*.*) Все файлы (*.*) Open Открыть Select a Directory Выбрать каталог Q3LocalFs Could not read directory %1 Невозможно просмотреть каталог %1 Could not create directory %1 Невозможно создать каталог %1 Could not remove file or directory %1 Невозможно удалить файл или каталог %1 Could not rename %1 to %2 Невозможно переименовать %1 в %2 Could not open %1 Невозможно открыть %1 Could not write %1 Невозможно записать %1 Q3MainWindow Line up Выровнять Customize... Настроить... Q3NetworkProtocol Operation stopped by the user Операция прервана пользователем Q3ProgressDialog Cancel Отмена Q3TabDialog OK OK Apply Применить Help Справка Defaults По умолчанию Cancel Отмена Q3TextEdit &Undo &Отменить &Redo &Повторить Cu&t &Вырезать &Copy &Копировать &Paste &Вставить Clear Очистить Select All Выделить все Q3TitleBar System Restore up Minimize Свернуть Restore down Maximize Развернуть Close Закрыть Contains commands to manipulate the window Puts a minimized back to normal Moves the window out of the way Puts a maximized window back to normal Makes the window full screen Closes the window Displays the name of the window and contains controls to manipulate it Q3ToolBar More... Больше... Q3UrlOperator The protocol `%1' is not supported Протокол `%1' не поддерживается The protocol `%1' does not support listing directories Протокол `%1' не поддерживает просмотр каталогов The protocol `%1' does not support creating new directories Протокол `%1' не поддерживает создание новых каталогов The protocol `%1' does not support removing files or directories Протокол `%1' не поддерживает удаление файлов или каталогов The protocol `%1' does not support renaming files or directories Протокол `%1' не поддерживает переименование файлов или каталогов The protocol `%1' does not support getting files Протокол `%1' не поддерживает доставку файлов The protocol `%1' does not support putting files Протокол `%1' не поддерживает отправку файлов The protocol `%1' does not support copying or moving files or directories Протокол `%1' не поддерживает копирование или перемещение файлов и каталогов (unknown) (неизвестно) Q3Wizard &Cancel &Отмена < &Back < &Назад &Next > &Вперед > &Finish &Финиш &Help &Справка QAbstractSocket Host not found Connection refused Отказано в соединении Connection timed out Operation on socket is not supported Socket operation timed out Socket is not connected Network unreachable QAbstractSpinBox &Step up Step &down &Select All QApplication QT_LAYOUT_DIRECTION Translate this string to the string 'LTR' in left-to-right languages or to 'RTL' in right-to-left languages (such as Hebrew and Arabic) to get proper widget layout. LTR Executable '%1' requires Qt %2, found Qt %3. Программный модуль '%1' требует Qt %2, найдена версия %3. Incompatible Qt Library Error Ошибка совместимости библиотеки Qt Activate Activates the program's main window QAxSelect Select ActiveX Control OK OK &Cancel &Отмена COM &Object: QCheckBox Uncheck Check Toggle QColorDialog Hu&e: &Тон: &Sat: &Нас: &Val: &Ярк: &Red: &Крас: &Green: &Зел: Bl&ue: С&ин: A&lpha channel: &Альфа-канал: Select Color &Basic colors &Основные цвета &Custom colors &Собственные цвета &Define Custom Colors >> &Выбрать собственные цвета >> OK OK Cancel Отмена &Add to Custom Colors &Добавить к собственным цветам Select color Выбрать цвет QComboBox Open Открыть False False True True Close Закрыть QCoreApplication %1: key is empty QSystemSemaphore %1: unable to make key QSystemSemaphore %1: ftok failed QSystemSemaphore QDB2Driver Unable to connect Unable to commit transaction Unable to rollback transaction Unable to set autocommit QDB2Result Unable to execute statement Unable to prepare statement Unable to bind variable Unable to fetch record %1 Unable to fetch next Unable to fetch first QDateTimeEdit AM am PM pm QDial QDial SpeedoMeter SliderHandle QDialog What's This? Что это? Done QDialogButtonBox OK OK Save Сохранить &Save &Сохранить Open Открыть Cancel Отмена &Cancel &Отмена Close Закрыть &Close &Закрыть Apply Применить Reset Help Справка Don't Save Discard &Yes &Да Yes to &All &No &Нет N&o to All Save All Abort Retry Ignore Restore Defaults Close without Saving &OK &OK QDirModel Name Имя Size Размер Kind Match OS X Finder Type All other platforms Тип Date Modified QDockWidget Close Закрыть Dock Float QDoubleSpinBox More Less QErrorMessage &Show this message again &Показывать это сообщение в дальнейшем &OK &OK Debug Message: Отладочное сообщение: Warning: Предупреждение: Fatal Error: Критическая ошибка: QFile Destination file exists Cannot open %1 for input Cannot open for output Failure to write block Cannot create %1 for output QFileDialog All Files (*) Все файлы (*) Back Назад List View Список Detail View Детальный вид File Файл Open Открыть Save As Сохранить как &Open &Открыть &Save &Сохранить Recent Places &Rename &Переименовать &Delete &Удалить Show &hidden files Показать &скрытые файлы New Folder Новый каталог Find Directory Найти каталог Directories Каталоги All Files (*.*) Все файлы (*.*) Directory: Каталог: %1 already exists. Do you want to replace it? %1 File not found. Please verify the correct file name was given. My Computer Parent Directory Files of type: %1 Directory not found. Please verify the correct directory name was given. '%1' is write protected. Do you want to delete it anyway? Are sure you want to delete '%1'? Could not delete directory. Drive Unknown Show Forward Вперед &New Folder &Choose Remove File &name: &Имя файла: Look in: Create New Folder Создать новый каталог QFileSystemModel %1 TB %1 GB %1 MB %1 KB %1 bytes Invalid filename The name "%1" can not be used.Try using another name, with fewer characters or no punctuations marks. Name Имя Size Размер Kind Match OS X Finder Type All other platforms Тип Date Modified My Computer Computer QFontDatabase Normal Bold Demi Bold Black Demi Light Italic Oblique Any Latin Greek Cyrillic Armenian Hebrew Arabic Syriac Thaana Devanagari Bengali Gurmukhi Gujarati Oriya Tamil Telugu Kannada Malayalam Sinhala Thai Lao Tibetan Myanmar Georgian Khmer Simplified Chinese Traditional Chinese Japanese Korean Vietnamese Symbol Ogham Runic QFontDialog &Font &Шрифт Font st&yle &Стиль шрифта &Size &Размер Effects Эффекты Stri&keout &Перечеркивать &Underline П&одчеркивать Sample Пример Select Font Выбрать шрифт Wr&iting System QFtp Host %1 found Обнаружен узел %1 Host found Узел обнаружен Connected to host %1 Установлено соединение с узлом %1 Connected to host Соединение с узлом установлено Connection to %1 closed Соединение с узлом %1 разорвано Connection closed Соединение разорвано Host %1 not found Узел %1 не обнаружен Connection refused to host %1 Отказано в соединении с узлом %1 Connection timed out to host %1 Unknown error Неизвестная ошибка Connecting to host failed: %1 Ошибка соединения с узлом: %1 Login failed: %1 Ошибка входа в систему: %1 Listing directory failed: %1 Ошибка просмотра каталога: %1 Changing directory failed: %1 Ошибка смены каталога: %1 Downloading file failed: %1 Ошибка загрузки файла: %1 Uploading file failed: %1 Ошибка отправки файла: %1 Removing file failed: %1 Ошибка удаления файла: %1 Creating directory failed: %1 Ошибка создания каталога: %1 Removing directory failed: %1 Ошибка удаления каталога: %1 Not connected Нет соединения Connection refused for data connection Отказано в соединении передачи данных QHostInfo Unknown error Неизвестная ошибка QHostInfoAgent Host not found Unknown address type Unknown error Неизвестная ошибка QHttp Connection refused Отказано в соединении Host %1 not found Узел %1 не обнаружен Wrong content length Неверная длина данных HTTPS connection requested but SSL support not compiled in HTTP request failed Ошибка HTTP-запроса Host %1 found Обнаружен узел %1 Host found Узел обнаружен Connected to host %1 Установлено соединение с узлом %1 Connected to host Соединение с узлом установлено Connection to %1 closed Соединение с узлом %1 разорвано Connection closed Соединение разорвано Unknown error Неизвестная ошибка Request aborted Запрос отменен No server set to connect to Не выбран сервер для подключения Server closed connection unexpectedly Неожиданный разрыв соединения сервером Invalid HTTP response header Получен некорректный HTTP-заголовок Invalid HTTP chunked body Некорректный HTTP-ответ Error writing response to device Proxy authentication required Authentication required Connection refused (or timed out) Proxy requires authentication Host requires authentication Data corrupted Unknown protocol specified SSL handshake failed QHttpSocketEngine Did not receive HTTP response from proxy Error parsing authentication request from proxy Authentication required Proxy denied connection Error communicating with HTTP proxy Proxy server not found Proxy connection refused Proxy server connection timed out Proxy connection closed prematurely QIBaseDriver Error opening database Could not start transaction Unable to commit transaction Unable to rollback transaction QIBaseResult Unable to create BLOB Unable to write BLOB Unable to open BLOB Unable to read BLOB Could not find array Could not get array data Could not get query info Could not start transaction Unable to commit transaction Could not allocate statement Could not prepare statement Could not describe input statement Could not describe statement Unable to close statement Unable to execute query Could not fetch next item Could not get statement info QIODevice Permission denied Too many open files No such file or directory No space left on device Unknown error Неизвестная ошибка QInputContext XIM XIM input method Windows input method Mac OS X input method QInputDialog Enter a value: QLibrary Could not mmap '%1': %2 Plugin verification data mismatch in '%1' Could not unmap '%1': %2 The plugin '%1' uses incompatible Qt library. (%2.%3.%4) [%5] The plugin '%1' uses incompatible Qt library. Expected build key "%2", got "%3" Unknown error Неизвестная ошибка The shared library was not found. The file '%1' is not a valid Qt plugin. The plugin '%1' uses incompatible Qt library. (Cannot mix debug and release libraries.) Cannot load library %1: %2 Cannot unload library %1: %2 Cannot resolve symbol "%1" in %2: %3 QLineEdit &Undo &Отменить &Redo &Повторить Cu&t &Вырезать &Copy &Копировать &Paste В&ставить Select All Выделить все Delete Удалить QLocalServer %1: Name error %1: Permission denied %1: Address in use %1: Unknown error %2 QLocalSocket %1: Connection refused %1: Remote closed %1: Invalid name %1: Socket access error %1: Socket resource error %1: Socket operation timed out %1: Datagram too large %1: Connection error %1: The socket operation is not supported %1: Unknown error %1: Unknown error %2 QMYSQLDriver Unable to open database ' Unable to connect Unable to begin transaction Unable to commit transaction Unable to rollback transaction QMYSQLResult Unable to fetch data Unable to execute query Unable to store result Unable to prepare statement Unable to reset statement Unable to bind value Unable to execute statement Unable to bind outvalues Unable to store statement results Unable to execute next query Unable to store next result QMdiArea (Untitled) QMdiSubWindow %1 - [%2] %1 - [%2] Close Закрыть Minimize Свернуть Restore Down Восстановить &Restore &Восстановить &Move &Переместить &Size &Размер Mi&nimize &Свернуть Ma&ximize Р&азвернуть Stay on &Top Всегда &наверху &Close &Закрыть - [%1] Maximize Развернуть Unshade Shade Restore Help Справка Menu Меню QMenu Close Закрыть Open Открыть Execute QMenuBar About О программе Config Конфигурация Preference Настройки Options Параметры Setting Настройки Setup Настройки Quit Выход Exit Выход QMessageBox OK OK About Qt Help Справка This program uses Qt version %1. Show Details... Hide Details... <h3>About Qt</h3>%1Qt is a C++ toolkit for cross-platform application development.Qt provides single-source portability across MS Windows, Mac OS X, Linux, and all major commercial Unix variants. Qt is also available for embedded devices as Qt for Embedded Linux and Qt for Windows CE.Qt is a Nokia product. See <a href="http://qtsoftware.com/qt/">qtsoftware.com/qt/</a> for more information. This program uses Qt Open Source Edition version %1.Qt Open Source Edition is intended for the development of Open Source applications. You need a commercial Qt license for development of proprietary (closed source) applications.Please see <a href="http://qtsoftware.com/company/model/">qtsoftware.com/company/model/</a> for an overview of Qt licensing. QMultiInputContext Select IM QMultiInputContextPlugin Multiple input method switcher Multiple input method switcher that uses the context menu of the text widgets QNativeSocketEngine The remote host closed the connection Network operation timed out Out of resources Unsupported socket operation Protocol type not supported Invalid socket descriptor Network unreachable Permission denied Connection timed out Connection refused Отказано в соединении The bound address is already in use The address is not available The address is protected Unable to send a message Unable to receive a message Unable to write Network error Another socket is already listening on the same port Unable to initialize non-blocking socket Unable to initialize broadcast socket Attempt to use IPv6 socket on a platform with no IPv6 support Host unreachable Datagram was too large to send Operation on non-socket Unknown error Неизвестная ошибка The proxy type is invalid for this operation QNetworkAccessCacheBackend Error opening %1 QNetworkAccessFileBackend Request for opening non-local file %1 Error opening %1: %2 Write error writing to %1: %2 Cannot open %1: Path is a directory Read error reading from %1: %2 QNetworkAccessFtpBackend No suitable proxy found Cannot open %1: is a directory Logging in to %1 failed: authentication required Error while downloading %1: %2 Error while uploading %1: %2 QNetworkAccessHttpBackend No suitable proxy found QNetworkReply Error downloading %1 - server replied: %2 Protocol "%1" is unknown QNetworkReplyImpl Operation canceled QOCIDriver Unable to logon Unable to initialize QOCIDriver Unable to begin transaction Unable to commit transaction Unable to rollback transaction QOCIResult Unable to bind column for batch execute Unable to execute batch statement Unable to goto next Unable to alloc statement Unable to prepare statement Unable to bind value Unable to execute select statement Unable to execute statement QODBCDriver Unable to connect Unable to connect - Driver doesn't support all needed functionality Unable to disable autocommit Unable to commit transaction Unable to rollback transaction Unable to enable autocommit QODBCResult QODBCResult::reset: Unable to set 'SQL_CURSOR_STATIC' as statement attribute. Please check your ODBC driver configuration Unable to execute statement Unable to fetch next Unable to prepare statement Unable to bind variable Unable to fetch last Unable to fetch Unable to fetch first Unable to fetch previous QObject Home Home Operation not supported on %1 Invalid URI: %1 Write error writing to %1: %2 Read error reading from %1: %2 Socket error on %1: %2 Remote host closed the connection prematurely on %1 Protocol error: packet of size 0 received No host name given QPPDOptionsModel Name Имя Value QPSQLDriver Unable to connect Could not begin transaction Could not commit transaction Could not rollback transaction Unable to subscribe Unable to unsubscribe QPSQLResult Unable to create query Unable to prepare statement QPageSetupWidget Centimeters (cm) Millimeters (mm) Inches (in) Points (pt) Form Paper Page size: Width: Height: Paper source: Orientation Portrait Портрет Landscape Альбом Reverse landscape Reverse portrait Margins top margin left margin right margin bottom margin QPluginLoader Unknown error Неизвестная ошибка The plugin was not loaded. QPrintDialog locally connected локальный Aliases: %1 Алиасы: %1 unknown неизвестно OK OK Cancel Отмена Print in color if available Цветная печать Printer Принтер Print all Печатать все Print range Печатать диапазон Print last page first Начать с последней страницы Number of copies: Число копий: Paper format Формат бумаги Portrait Портрет Landscape Альбом A0 (841 x 1189 mm) A0 (841 x 1189 мм) A1 (594 x 841 mm) A1 (594 x 841 мм) A2 (420 x 594 mm) A2 (420 x 594 мм) A3 (297 x 420 mm) A3 (297 x 420 мм) A5 (148 x 210 mm) A5 (148 x 210 мм) A6 (105 x 148 mm) A6 (105 x 148 мм) A7 (74 x 105 mm) A7 (74 x 105 мм) A8 (52 x 74 mm) A8 (52 x 74 мм) A9 (37 x 52 mm) A9 (37 x 52 мм) B0 (1000 x 1414 mm) B0 (1000 x 1414 мм) B1 (707 x 1000 mm) B1 (707 x 1000 мм) B2 (500 x 707 mm) B2 (500 x 707 мм) B3 (353 x 500 mm) B3 (353 x 500 мм) B4 (250 x 353 mm) B4 (250 x 353 мм) B6 (125 x 176 mm) B6 (125 x 176 мм) B7 (88 x 125 mm) B7 (88 x 125 мм) B8 (62 x 88 mm) B8 (62 x 88 мм) B9 (44 x 62 mm) B9 (44 x 62 мм) B10 (31 x 44 mm) B10 (31 x 44 мм) C5E (163 x 229 mm) C5E (163 x 229 мм) DLE (110 x 220 mm) DLE (110 x 220 мм) Folio (210 x 330 mm) Folio (210 x 330 мм) Ledger (432 x 279 mm) Ledger (432 x 279 мм) Tabloid (279 x 432 mm) Tabloid (279 x 432 мм) US Common #10 Envelope (105 x 241 mm) Конверт US #10 (105x241 мм) A4 (210 x 297 mm, 8.26 x 11.7 inches) B5 (176 x 250 mm, 6.93 x 9.84 inches) Executive (7.5 x 10 inches, 191 x 254 mm) Legal (8.5 x 14 inches, 216 x 356 mm) Letter (8.5 x 11 inches, 216 x 279 mm) Print Print File Файл Print To File ... File %1 is not writable. Please choose a different file name. %1 already exists. Do you want to overwrite it? File exists <qt>Do you want to overwrite it?</qt> Print selection %1 is a directory. Please choose a different file name. A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 C5E DLE Executive Folio Ledger Legal Letter Tabloid US Common #10 Envelope Custom &Options >> &Print &Options << Print to File (PDF) Print to File (Postscript) Local file Write %1 file The 'From' value cannot be greater than the 'To' value. QPrintPreviewDialog Page Setup %1% Print Preview Next page Previous page First page Last page Fit width Fit page Zoom in Zoom out Portrait Портрет Landscape Альбом Show single page Show facing pages Show overview of all pages Print Print Page setup Close Закрыть Export to PDF Export to PostScript QPrintPropertiesDialog Save Сохранить OK OK QPrintPropertiesWidget Form Page Advanced QPrintSettingsOutput Form Copies Print range Печатать диапазон Print all Печатать все Pages from to Selection Output Settings Copies: Collate Reverse Options Параметры Color Mode Color Grayscale Duplex Printing None Long side Short side QPrintWidget Form Printer Принтер &Name: P&roperties Location: Preview Type: Output &file: ... QProcess Could not open input redirection for reading Could not open output redirection for writing Resource error (fork failure): %1 Process operation timed out Error reading from process Error writing to process Process crashed Process failed to start QProgressDialog Cancel Отмена QPushButton Open Открыть QRadioButton Check QRegExp no error occurred ошибки отсутствуют disabled feature used использовались отключенные возможности bad char class syntax bad char class syntax bad lookahead syntax bad lookahead syntax bad repetition syntax bad repetition syntax invalid octal value некорректное восьмеричное значение missing left delim отсутствует левый разделитель unexpected end неожиданный конец met internal limit достигнуто внутреннее ограничение QSQLite2Driver Error to open database Unable to begin transaction Unable to commit transaction Unable to rollback Transaction QSQLite2Result Unable to fetch results Unable to execute statement QSQLiteDriver Error opening database Error closing database Unable to begin transaction Unable to commit transaction Unable to rollback transaction QSQLiteResult Unable to fetch row Unable to execute statement Unable to reset statement Unable to bind parameters Parameter count mismatch No query QScrollBar Scroll here Left edge Top Right edge Bottom Page left Page up Page right Page down Scroll left Scroll up Scroll right Scroll down Line up Выровнять Position Line down QSharedMemory %1: unable to set key on lock %1: create size is less then 0 %1: unable to lock %1: unable to unlock %1: permission denied %1: already exists %1: doesn't exists %1: out of resources %1: unknown error %2 %1: key is empty %1: unix key file doesn't exists %1: ftok failed %1: unable to make key %1: system-imposed size restrictions %1: not attached %1: invalid size %1: key error %1: size query failed QShortcut Space Space Esc Esc Tab Tab Backtab Backtab Backspace Backspace Return Return Enter Enter Ins Ins Del Del Pause Pause Print Print SysReq SysReq Home Home End End Left Left Up Up Right Right Down Down PgUp PgUp PgDown PgDown CapsLock CapsLock NumLock NumLock ScrollLock ScrollLock Menu Меню Help Справка Back Назад Forward Вперед Stop Стоп Refresh Обновить Volume Down Тише Volume Mute Выключить звук Volume Up Громче Bass Boost Bass Boost Bass Up Bass Up Bass Down Bass Down Treble Up Treble Up Treble Down Treble Down Media Play Воспроизведение Media Stop Остановить воспроизведение Media Previous Воспроизвести предыдущее Media Next Воспроизвести следующее Media Record Запись Favorites Избранное Search Поиск Standby Дежурный режим Open URL Открыть URL Launch Mail Почта Launch Media Проигрыватель Launch (0) Запустить (0) Launch (1) Запустить (1) Launch (2) Запустить (2) Launch (3) Запустить (3) Launch (4) Запустить (4) Launch (5) Запустить (5) Launch (6) Запустить (6) Launch (7) Запустить (7) Launch (8) Запустить (8) Launch (9) Запустить (9) Launch (A) Запустить (A) Launch (B) Запустить (B) Launch (C) Запустить (C) Launch (D) Запустить (D) Launch (E) Запустить (E) Launch (F) Запустить (F) Print Screen Page Up Page Down Caps Lock Num Lock Number Lock Scroll Lock Insert Вставить Delete Удалить Escape System Request Select Yes Да No Нет Context1 Context2 Context3 Context4 Call Hangup Flip Ctrl Ctrl Shift Shift Alt Alt Meta Meta + + F%1 F%1 Home Page QSlider Page left Page up Position Page right Page down QSocks5SocketEngine Connection to proxy refused Connection to proxy closed prematurely Proxy host not found Connection to proxy timed out Proxy authentication failed Proxy authentication failed: %1 SOCKS version 5 protocol error General SOCKSv5 server failure Connection not allowed by SOCKSv5 server TTL expired SOCKSv5 command not supported Address type not supported Unknown SOCKSv5 proxy error code 0x%1 Network operation timed out QSpinBox More Less QSql Delete Удалить Delete this record? Удалить эту запись? Yes Да No Нет Insert Вставить Update Обновить Save edits? Сохранить изменения? Cancel Отмена Confirm Подтвердить Cancel your edits? Отменить изменения? QSslSocket Unable to write data: %1 Error while reading: %1 Error during SSL handshake: %1 Error creating SSL context (%1) Invalid or empty cipher list (%1) Error creating SSL session, %1 Error creating SSL session: %1 Cannot provide a certificate with no key, %1 Error loading local certificate, %1 Error loading private key, %1 Private key does not certificate public key, %1 QSystemSemaphore %1: out of resources %1: permission denied %1: already exists %1: does not exist %1: unknown error %2 QTDSDriver Unable to open connection Unable to use database QTabBar Scroll Left Scroll Right QTcpServer Operation on socket is not supported QTextControl &Undo &Отменить &Redo &Повторить Cu&t &Вырезать &Copy &Копировать Copy &Link Location &Paste &Вставить Delete Удалить Select All Выделить все QToolButton Press Open Открыть QUdpSocket This platform does not support IPv6 QUndoGroup Undo Отменить Redo Повторить QUndoModel <empty> QUndoStack Undo Отменить Redo Повторить QUnicodeControlCharacterMenu LRM Left-to-right mark RLM Right-to-left mark ZWJ Zero width joiner ZWNJ Zero width non-joiner ZWSP Zero width space LRE Start of left-to-right embedding RLE Start of right-to-left embedding LRO Start of left-to-right override RLO Start of right-to-left override PDF Pop directional formatting Insert Unicode control character QWebFrame Request cancelled Request blocked Cannot show URL Frame load interruped by policy change Cannot show mimetype File does not exist QWebPage Bad HTTP request Submit default label for Submit buttons in forms on web pages Submit Submit (input element) alt text for <input> elements with no alt, title, or value Reset default label for Reset buttons in forms on web pages This is a searchable index. Enter search keywords: text that appears at the start of nearly-obsolete web pages in the form of a 'searchable index' Choose File title for file button used in HTML forms No file selected text to display in file button used in HTML forms when no file is selected Open in New Window Open in New Window context menu item Save Link... Download Linked File context menu item Copy Link Copy Link context menu item Open Image Open Image in New Window context menu item Save Image Download Image context menu item Copy Image Copy Link context menu item Open Frame Open Frame in New Window context menu item Copy Copy context menu item Go Back Back context menu item Go Forward Forward context menu item Stop Stop context menu item Стоп Reload Reload context menu item Cut Cut context menu item Paste Paste context menu item No Guesses Found No Guesses Found context menu item Ignore Ignore Spelling context menu item Add To Dictionary Learn Spelling context menu item Search The Web Search The Web context menu item Look Up In Dictionary Look Up in Dictionary context menu item Open Link Open Link context menu item Ignore Ignore Grammar context menu item Spelling Spelling and Grammar context sub-menu item Show Spelling and Grammar menu item title Hide Spelling and Grammar menu item title Check Spelling Check spelling context menu item Check Spelling While Typing Check spelling while typing context menu item Check Grammar With Spelling Check grammar with spelling context menu item Fonts Font context sub-menu item Bold Bold context menu item Italic Italic context menu item Underline Underline context menu item Outline Outline context menu item Direction Writing direction context sub-menu item Text Direction Text direction context sub-menu item Default Default writing direction context menu item LTR Left to Right context menu item RTL Right to Left context menu item Inspect Inspect Element context menu item No recent searches Label for only item in menu that appears when clicking on the search field image, when no searches have been performed Recent searches label for first item in the menu that appears when clicking on the search field image, used as embedded menu title Clear recent searches menu item in Recent Searches menu that empties menu's contents Unknown Unknown filesize FTP directory listing item %1 (%2x%3 pixels) Title string for images Web Inspector - %2 Scroll here Left edge Top Right edge Bottom Page left Page up Page right Page down Scroll left Scroll up Scroll right Scroll down %n file(s) number of chosen file JavaScript Alert - %1 JavaScript Confirm - %1 JavaScript Prompt - %1 Move the cursor to the next character Move the cursor to the previous character Move the cursor to the next word Move the cursor to the previous word Move the cursor to the next line Move the cursor to the previous line Move the cursor to the start of the line Move the cursor to the end of the line Move the cursor to the start of the block Move the cursor to the end of the block Move the cursor to the start of the document Move the cursor to the end of the document Select to the next character Select to the previous character Select to the next word Select to the previous word Select to the next line Select to the previous line Select to the start of the line Select to the end of the line Select to the start of the block Select to the end of the block Select to the start of the document Select to the end of the document Delete to the start of the word Delete to the end of the word QWhatsThisAction What's This? Что это? QWidget * QWizard < &Back < &Назад &Finish &Финиш &Help &Справка Go Back Continue Commit Done Quit Выход Help Справка Cancel Отмена &Next &Next > &Вперед > QWorkspace &Restore &Восстановить &Move &Переместить &Size &Размер Mi&nimize &Свернуть Ma&ximize Р&азвернуть &Close &Закрыть Stay on &Top Всегда &наверху Sh&ade Свернуть в за&головок %1 - [%2] %1 - [%2] Minimize Свернуть Restore Down Восстановить Close Закрыть &Unshade Восстановить из за&головка QXml no error occurred ошибки отсутствуют error triggered by consumer ошибка инициирована пользователем unexpected end of file неожиданный конец файла more than one document type definition определен более, чем один тип документов error occurred while parsing element в процессе грамматического разбора элемента произошла ошибка tag mismatch отсутствует тег error occurred while parsing content в процессе грамматического разбора произошла ошибка unexpected character неожиданный символ invalid name for processing instruction некорректное имя директивы version expected while reading the XML declaration при чтении XML-тега ожидался параметр version wrong value for standalone declaration некорректное значение параметра standalone encoding declaration or standalone declaration expected while reading the XML declaration при чтении XML-тега ожидался параметр encoding или параметр standalone standalone declaration expected while reading the XML declaration при чтении XML-тега ожидался параметр standalone error occurred while parsing document type definition в процессе грамматического разбора типа документа произошла ошибка letter is expected ожидался символ error occurred while parsing comment в процессе грамматического разбора комментария произошла ошибка error occurred while parsing reference в процессе грамматического разбора ссылки произошла ошибка internal general entity reference not allowed in DTD internal general entity reference not allowed in DTD external parsed general entity reference not allowed in attribute value external parsed general entity reference not allowed in attribute value external parsed general entity reference not allowed in DTD external parsed general entity reference not allowed in DTD unparsed entity reference in wrong context unparsed entity reference in wrong context recursive entities рекурсивные объекты error in the text declaration of an external entity error in the text declaration of an external entity QXmlStream Extra content at end of document. Invalid entity value. Invalid XML character. Sequence ']]>' not allowed in content. Namespace prefix '%1' not declared Attribute redefined. Unexpected character '%1' in public id literal. Invalid XML version string. Unsupported XML version. %1 is an invalid encoding name. Encoding %1 is unsupported Standalone accepts only yes or no. Invalid attribute in XML declaration. Premature end of document. Invalid document. Expected , but got ' Unexpected ' Expected character data. Recursive entity detected. Start tag expected. XML declaration not at start of document. NDATA in parameter entity declaration. %1 is an invalid processing instruction name. Invalid processing instruction name. Illegal namespace declaration. Invalid XML name. Opening and ending tag mismatch. Reference to unparsed entity '%1'. Entity '%1' not declared. Reference to external entity '%1' in attribute value. Invalid character reference. Encountered incorrectly encoded content. The standalone pseudo attribute must appear after the encoding. %1 is an invalid PUBLIC identifier. QtXmlPatterns An %1-attribute with value %2 has already been declared. An %1-attribute must have a valid %2 as value, which %3 isn't. Network timeout. Element %1 can't be serialized because it appears outside the document element. Attribute %1 can't be serialized because it appears at the top level. Year %1 is invalid because it begins with %2. Day %1 is outside the range %2..%3. Month %1 is outside the range %2..%3. Overflow: Can't represent date %1. Day %1 is invalid for month %2. Time 24:%1:%2.%3 is invalid. Hour is 24, but minutes, seconds, and milliseconds are not all 0; Time %1:%2:%3.%4 is invalid. Overflow: Date can't be represented. At least one component must be present. At least one time component must appear after the %1-delimiter. No operand in an integer division, %1, can be %2. The first operand in an integer division, %1, cannot be infinity (%2). The second operand in a division, %1, cannot be zero (%2). %1 is not a valid value of type %2. When casting to %1 from %2, the source value cannot be %3. Integer division (%1) by zero (%2) is undefined. Division (%1) by zero (%2) is undefined. Modulus division (%1) by zero (%2) is undefined. Dividing a value of type %1 by %2 (not-a-number) is not allowed. Dividing a value of type %1 by %2 or %3 (plus or minus zero) is not allowed. Multiplication of a value of type %1 by %2 or %3 (plus or minus infinity) is not allowed. A value of type %1 cannot have an Effective Boolean Value. Effective Boolean Value cannot be calculated for a sequence containing two or more atomic values. Value %1 of type %2 exceeds maximum (%3). Value %1 of type %2 is below minimum (%3). A value of type %1 must contain an even number of digits. The value %2 does not. %1 is not valid as a value of type %2. Operator %1 cannot be used on type %2. Operator %1 cannot be used on atomic values of type %2 and %3. The namespace URI in the name for a computed attribute cannot be %1. The name for a computed attribute cannot have the namespace URI %1 with the local name %2. Type error in cast, expected %1, received %2. When casting to %1 or types derived from it, the source value must be of the same type, or it must be a string literal. Type %2 is not allowed. No casting is possible with %1 as the target type. It is not possible to cast from %1 to %2. Casting to %1 is not possible because it is an abstract type, and can therefore never be instantiated. It's not possible to cast the value %1 of type %2 to %3 Failure when casting from %1 to %2: %3 A comment cannot contain %1 A comment cannot end with a %1. No comparisons can be done involving the type %1. Operator %1 is not available between atomic values of type %2 and %3. An attribute node cannot be a child of a document node. Therefore, the attribute %1 is out of place. A library module cannot be evaluated directly. It must be imported from a main module. No template by name %1 exists. A value of type %1 cannot be a predicate. A predicate must have either a numeric type or an Effective Boolean Value type. A positional predicate must evaluate to a single numeric value. The target name in a processing instruction cannot be %1 in any combination of upper and lower case. Therefore, is %2 invalid. %1 is not a valid target name in a processing instruction. It must be a %2 value, e.g. %3. The last step in a path must contain either nodes or atomic values. It cannot be a mixture between the two. The data of a processing instruction cannot contain the string %1 No namespace binding exists for the prefix %1 No namespace binding exists for the prefix %1 in %2 %1 is an invalid %2 %1 takes at most %n argument(s). %2 is therefore invalid. %1 requires at least %n argument(s). %2 is therefore invalid. The first argument to %1 cannot be of type %2. It must be a numeric type, xs:yearMonthDuration or xs:dayTimeDuration. The first argument to %1 cannot be of type %2. It must be of type %3, %4, or %5. The second argument to %1 cannot be of type %2. It must be of type %3, %4, or %5. %1 is not a valid XML 1.0 character. The first argument to %1 cannot be of type %2. If both values have zone offsets, they must have the same zone offset. %1 and %2 are not the same. %1 was called. %1 must be followed by %2 or %3, not at the end of the replacement string. In the replacement string, %1 must be followed by at least one digit when not escaped. In the replacement string, %1 can only be used to escape itself or %2, not %3 %1 matches newline characters %1 and %2 match the start and end of a line. Matches are case insensitive Whitespace characters are removed, except when they appear in character classes %1 is an invalid regular expression pattern: %2 %1 is an invalid flag for regular expressions. Valid flags are: If the first argument is the empty sequence or a zero-length string (no namespace), a prefix cannot be specified. Prefix %1 was specified. It will not be possible to retrieve %1. The root node of the second argument to function %1 must be a document node. %2 is not a document node. The default collection is undefined %1 cannot be retrieved The normalization form %1 is unsupported. The supported forms are %2, %3, %4, and %5, and none, i.e. the empty string (no normalization). A zone offset must be in the range %1..%2 inclusive. %3 is out of range. %1 is not a whole number of minutes. Required cardinality is %1; got cardinality %2. The item %1 did not match the required type %2. %1 is an unknown schema type. Only one %1 declaration can occur in the query prolog. The initialization of variable %1 depends on itself No variable by name %1 exists The variable %1 is unused Version %1 is not supported. The supported XQuery version is 1.0. The encoding %1 is invalid. It must contain Latin characters only, must not contain whitespace, and must match the regular expression %2. No function with signature %1 is available A default namespace declaration must occur before function, variable, and option declarations. Namespace declarations must occur before function, variable, and option declarations. Module imports must occur before function, variable, and option declarations. It is not possible to redeclare prefix %1. Prefix %1 is already declared in the prolog. The name of an option must have a prefix. There is no default namespace for options. The Schema Import feature is not supported, and therefore %1 declarations cannot occur. The target namespace of a %1 cannot be empty. The module import feature is not supported No value is available for the external variable by name %1. A construct was encountered which only is allowed in XQuery. A template by name %1 has already been declared. The keyword %1 cannot occur with any other mode name. The value of attribute %1 must of type %2, which %3 isn't. The prefix %1 can not be bound. By default, it is already bound to the namespace %2. A variable by name %1 has already been declared. A stylesheet function must have a prefixed name. The namespace for a user defined function cannot be empty (try the predefined prefix %1 which exists for cases like this) The namespace %1 is reserved; therefore user defined functions may not use it. Try the predefined prefix %2, which exists for these cases. The namespace of a user defined function in a library module must be equivalent to the module namespace. In other words, it should be %1 instead of %2 A function already exists with the signature %1. No external functions are supported. All supported functions can be used directly, without first declaring them as external An argument by name %1 has already been declared. Every argument name must be unique. When function %1 is used for matching inside a pattern, the argument must be a variable reference or a string literal. In an XSL-T pattern, the first argument to function %1 must be a string literal, when used for matching. In an XSL-T pattern, the first argument to function %1 must be a literal or a variable reference, when used for matching. In an XSL-T pattern, function %1 cannot have a third argument. In an XSL-T pattern, only function %1 and %2, not %3, can be used for matching. In an XSL-T pattern, axis %1 cannot be used, only axis %2 or %3 can. %1 is an invalid template mode name. The name of a variable bound in a for-expression must be different from the positional variable. Hence, the two variables named %1 collide. The Schema Validation Feature is not supported. Hence, %1-expressions may not be used. None of the pragma expressions are supported. Therefore, a fallback expression must be present Each name of a template parameter must be unique; %1 is duplicated. The %1-axis is unsupported in XQuery %1 is not a valid name for a processing-instruction. %1 is not a valid numeric literal. No function by name %1 is available. The namespace URI cannot be the empty string when binding to a prefix, %1. %1 is an invalid namespace URI. It is not possible to bind to the prefix %1 Namespace %1 can only be bound to %2 (and it is, in either case, pre-declared). Prefix %1 can only be bound to %2 (and it is, in either case, pre-declared). Two namespace declaration attributes have the same name: %1. The namespace URI must be a constant and cannot use enclosed expressions. An attribute by name %1 has already appeared on this element. A direct element constructor is not well-formed. %1 is ended with %2. The name %1 does not refer to any schema type. %1 is an complex type. Casting to complex types is not possible. However, casting to atomic types such as %2 works. %1 is not an atomic type. Casting is only possible to atomic types. %1 is not in the in-scope attribute declarations. Note that the schema import feature is not supported. The name of an extension expression must be in a namespace. empty zero or one exactly one one or more zero or more Required type is %1, but %2 was found. Promoting %1 to %2 may cause loss of precision. The focus is undefined. It's not possible to add attributes after any other kind of node. An attribute by name %1 has already been created. Only the Unicode Codepoint Collation is supported(%1). %2 is unsupported. %1 is an unsupported encoding. %1 contains octets which are disallowed in the requested encoding %2. The codepoint %1, occurring in %2 using encoding %3, is an invalid XML character. Ambiguous rule match. In a namespace constructor, the value for a namespace value cannot be an empty string. The prefix must be a valid %1, which %2 is not. The prefix %1 cannot be bound. Only the prefix %1 can be bound to %2 and vice versa. Circularity detected The parameter %1 is required, but no corresponding %2 is supplied. The parameter %1 is passed, but no corresponding %2 exists. The URI cannot have a fragment Element %1 is not allowed at this location. Text nodes are not allowed at this location. Parse error: %1 The value of the XSL-T version attribute must be a value of type %1, which %2 isn't. Running an XSL-T 1.0 stylesheet with a 2.0 processor. Unknown XSL-T attribute %1. Attribute %1 and %2 are mutually exclusive. In a simplified stylesheet module, attribute %1 must be present. If element %1 has no attribute %2, it cannot have attribute %3 or %4. Element %1 must have at least one of the attributes %2 or %3. At least one mode must be specified in the %1-attribute on element %2. Attribute %1 cannot appear on the element %2. Only the standard attributes can appear. Attribute %1 cannot appear on the element %2. Only %3 is allowed, and the standard attributes. Attribute %1 cannot appear on the element %2. Allowed is %3, %4, and the standard attributes. Attribute %1 cannot appear on the element %2. Allowed is %3, and the standard attributes. XSL-T attributes on XSL-T elements must be in the null namespace, not in the XSL-T namespace which %1 is. The attribute %1 must appear on element %2. The element with local name %1 does not exist in XSL-T. Element %1 must come last. At least one %1-element must occur before %2. Only one %1-element can appear. At least one %1-element must occur inside %2. When attribute %1 is present on %2, a sequence constructor cannot be used. Element %1 must have either a %2-attribute or a sequence constructor. When a parameter is required, a default value cannot be supplied through a %1-attribute or a sequence constructor. Element %1 cannot have children. Element %1 cannot have a sequence constructor. The attribute %1 cannot appear on %2, when it is a child of %3. A parameter in a function cannot be declared to be a tunnel. This processor is not Schema-aware and therefore %1 cannot be used. Top level stylesheet elements must be in a non-null namespace, which %1 isn't. The value for attribute %1 on element %2 must either be %3 or %4, not %5. Attribute %1 cannot have the value %2. The attribute %1 can only appear on the first %2 element. At least one %1 element must appear as child of %2. VolumeSlider Muted Volume: %1%