path: root/doc/src/webkit/guide/chapter_cache.qdoc

/****************************************************************************
**
** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
** All rights reserved.
** Contact: Nokia Corporation (qt-info@nokia.com)
**
** This file is part of the Qt WebKit module of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:BSD$
** You may use this file under the terms of the BSD license as follows:
**
** "Redistribution and use in source and binary forms, with or without
** modification, are permitted provided that the following conditions are
** met:
**   * Redistributions of source code must retain the above copyright
**     notice, this list of conditions and the following disclaimer.
**   * Redistributions in binary form must reproduce the above copyright
**     notice, this list of conditions and the following disclaimer in
**     the documentation and/or other materials provided with the
**     distribution.
**   * Neither the name of Nokia Corporation and its Subsidiary(-ies) nor
**     the names of its contributors may be used to endorse or promote
**     products derived from this software without specific prior written
**     permission.
**
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
** $QT_END_LICENSE$
**
****************************************************************************/

/*!

\page qtwebkit-guide-cache.html
\title QtWebKit Guide - Client Storage
\chapter Client Storage

This section of the \l{QtWebKit Guide} serves as an introduction to the
\l{HTML5 Web Storage} features of QtWebKit.

Traditional mobile web development centered around the limitations of client
handsets, which had very little storage for applications. As handsets become
more powerful, however, this assumption is no longer valid. HTML5's newly
introduced \l{HTML5 Web Storage}{Web Storage} features expand application
storage on the client.

HTML 5 standardizes access to an application's local data via \c{LocalStorage}
and \c{SessionStorage} APIs. These APIs boost the amount of client storage
available to web applications. They also can effectively replace cookies as a
means to maintain application state and track user preferences.

Local storage persists indefinitely, while session storage lasts only for the
duration of a window session. Local storage is available from any page or window
from the same site, while session storage is local to each window. Both local
and session storage rely on simple key/value pairs, with keys and values both
stored as strings.

Local and session storage are not the only client storage available. HTML 5
WebSQL serves as a more full-featured, client-side database. WebSQL brings
SQLite-based structured database functionality, typically deployed on servers,
to client browser applications. WebSQL is appropriate for data-intensive
applications requiring complex queries rather than simple key/value access.
WebSQL database transaction calls help avoid interfaces from locking up,
facilitate rollback and error handling, and protect against SQL injection.
Database versioning allows you to manage schema changes incrementally.


\section1 Simple Data Storage

The \c{localStorage} and \c{sessionStorage} APIs offer applications up to 5MB of
data storage. They both share the same simple key/value interface, but have
different namespaces and also differ in the extent to which data is available.
Local storage persists indefinitely, while session storage only lasts for the
duration of a window session. Local storage is available from any page or window
from the same site, while session storage is local to each window.

The following examples demonstrate the API interface. While these use
\c{localStorage} as an example, the same set of API calls work for
\c{sessionStorage}, which is also available within the \c{window} object.

The following performs an initial check for support of browser-based
storage and assigns the database to a variable:

\code
if (window.localStorage) {
    var db = window.localStorage;
    // storage functionality here
}
else {
    // store data remotely?
}
\endcode

The \c{getItem()} method retrieves the value of a database field named
\c{key}:

\code
var value = db.getItem("key");
\endcode

Note that both keys and values are represented as strings. If you specify any
other type of data, it is converted silently to a string representation. (See
\l{Storing Non-String Data} for ways around this limitation.) If \c{getItem()}
returns \c{null} rather than a string value, it means the specified key does not
exist.

The \c{setItem()} method establishes a new value. When adding data, it is a good
idea to check to make sure you haven't exceeded the allotted storage space:

\code
try {
    db.setItem("key", "string");
}
catch(err) {
    if (err.QUOTA_EXCEEDED_ERR) {
        // storage space is exceeded
    }
}
\endcode

The \c{removeItem()} method deletes database fields:

\code
db.removeItem("key");
\endcode

The \c{clear()} method deletes all key/value pairs within the database, either
for an entire site in the case of \c{localStorage}, or for an individual window
session in the case of \c{sessionStorage}:

\code
db.clear();
\endcode

Databases can be accessed as arrays using index notation, useful in cases where
you may not know all the field names. The \c{length} property returns the number
of fields in the database, and the \c{key()} method returns the name of the key
corresponding to a given index. The following reflects the contents of a
database in a JavaScript object:

\code
var obj = {};
for ( var i = 0, l = db.length ; i < l ; i++ ) {
    obj[ db.key(i) ] = db.getItem( db.key(i) );
}
\endcode

Since keys correspond to array indexes, you should not add or remove keys during
any operation that iterates over the full set of key/value pairs. Newly
introduced keys are introduced randomly into the array's sequence.

The following displays simple storage functionality. The application prompts for
a login and password if they are unavailable. This locally stored data is
available the next time users open the browser. However, the contents of the
credit card field is stored only for the duration of the browing session.

\l{ex_storage}{\inlineimage webkit-guide/scr_storage.png
}

\l{storage_css}{(CSS)}
\l{storage_js}{(JavaScript)}


    \section2 Storing Non-String Data

    Since local and session storage APIs only support string values, you need to
    be careful not to allow errors that result from passive conversions from
    other data types. The following sample shows how such an error might come
    about:

    \code
    var db = window.localStorage;
    var saveCardInfo;
        // user expresses preference NOT to save credit card info:
    saveCardInfo = false;
        // BUG happens here...
    db.setItem("save_card_info", saveCardInfo);
        // variable is now a string, not a boolean:
    saveCardInfo = db.getItem("save_card_info");
        // both "true" and "false" strings evaluate as true...
    if ( saveCardInfo ) {
        // ...so this code always executes...
    }
    else {
        // ...and this code never executes.
    }
    \endcode

    The user's preference to retain credit card information is expressed within
    the application as a \c{true} or \c{false} boolean value. When each value is
    passed to storage, however, it is passively converted to a string. When
    reassigned to a JavaScript variable, it no longer serves as a valid boolean
    test. The application falsely assumes users want to save credit card
    information, regardless of their expressed preference.

    The following sample fixes the problem. Instead of using \c{true} and
    \c{false} boolean values, it converts \c{1} and \c{0} strings to numbers:

    \code
    var db = window.localStorage;
    var saveCardInfo = 0;
    db.setItem("save_card_info", saveCardInfo);
    // multiplying forces numeric output:
    saveCardInfo = db.getItem("save_card_info") * 1;
    \endcode

    For a more reliable alternative, store values as JSON strings and rely on
    automatic type conversion when subsequently parsing them. The following
    sample shows how parsing JSON preserves both boolean and numeric data:

    \code
    var saveCardInfo = true;                    // boolean
    var shipMethod = 2;                        // number
    var db = window.localStorage;

    db.setItem("save_card_info", JSON.stringify(saveCardInfo));
    db.setItem("ship_method", JSON.stringify(shipMethod));

    saveCardInfo = JSON.parse(db.getItem("save_card_info"));    // boolean
    shipMethod = JSON.parse(db.getItem("ship_method"));        // number
    \endcode

    Note that this simple approach may cause problems of its own. For example,
    perhaps the words \c{true} and \c{false} really should be represented
    as strings. Encapsulating data within objects accounts for such variability:

    \code
    var db = window.localStorage;
    var obj = {
        bool    : true,
        str        : "true",
        num        : 1
    };
    db.setItem("appState", JSON.stringify(obj));    // to database...
    // "appState" is "{'bool':true,'num':1,'str':'true'}"
    obj = JSON.parse(db.getItem("appState"));    // ...and back
    // obj is same as initially defined.
    \endcode

    The ability to save objects as JSON strings means that you can save an
    application's state within a single database field. For example, you might
    use the following approach to save the entire contents of a shopping cart in
    a single field for later use:

    \code
    var db = window.localStorage;
    var cart = { items: [] };

    cart.message = "From your loving uncle";

    cart.items.push({
        description    : "Floor to Ceiling Shoe Rack",
        id        : 203174676,
        price    : 99.95,
        quantity    : 1,
        weight    : 20,
    });

    cart.items.push({
        description    : "Automatic Laser Toy for Cats",
        id        : 203345371,
        price    : 19.95,
        quantity    : 2,
        weight    : 0.5,
    });

    // save all cumulative items:
    db.setItem("cart", JSON.stringify(cart));

    // extract items from storage:
    cart = JSON.parse(db.getItem("cart"));
    \endcode

    JSON allows you to store data types, but functions are ignored. That makes
    it more difficult to preserve objects representing fully functional
    applications.

    \section2 Storage Events

    The \c{storage} event allows applications to respond indirectly to modified
    data resulting from calls to \c{setItem()}, \c{removeItem()}, or
    \c{clear()}. This may be useful in providing users with visual feedback
    notifying them of data that is modified locally, perhaps rather than being
    sent to a remote server:

    \code
    window.addEventListener("storage", function(event){
        var icon = document.querySelector("#indicator");
        if (event.storageArea.length) {
            icon.className = "writing";
        }
        else {
            icon.className = "empty";
        }
    }, false);
    \endcode

    The \c{storage} event's \c{storageArea} attribute returns the
    \c{localStorage} or \c{sessionStorage} object being modified. The \c{key} is
    the name of the field being modified, and \c{oldValue} and \c{newValue} are
    its values before and after the event. The \c{url} is the page that called
    the method triggering the change.


\section1 WebSQL Databases

While common local- or session-based databases are capable of storing complex
data structures, QtWebKit-based browsers can also rely upon the WebSQL standard,
which brings SQLite-based structured database functionality, typically deployed
on servers, to client browser applications. Based on SQLite version 3.6.19,
WebSQL is appropriate for data-intensive applications requring complex queries
rather than simple key/value access.

The following test confirms support for WebSQL:

\code
if (!!window.openDatabase) {
    // supports WebSQL
}
\endcode

Calls to databases made via the WebSQL API are made asynchronously via
transactions to avoid the user interface from locking up, as database
interaction may occur from several windows at a time.

The three core API methods are:

\list
\o \c{openDatabase()}
\o \c{transaction()}
\o \c{executeSql()}
\endlist

    \section2 Creating and Opening a New Database

    To create and open a database, use \c{openDatabase()}on the Window object,
    for example:

    \code
    var db = openDatabase('mydb', '1.0', 'my first database', 2*1024*1024);
    var db = openDatabase('notes', '', 'The Example Notes App!', 1048576);
    \endcode

    The four required arguments are the database name, version, display name,
    and estimated size in bytes. You can supply a function as an optional fifth
    argument to serve as a callback when a database is created. It may be used
    to call the \c{changeversion()} method, in which case the callback is
    invoked with an empty string for the database version.

    The second example above specifies an empty string for the version. In this
    case, the database opens no matter what the database version is. (An
    \c{openDatabase()} call specifying the wrong version for an existing
    database throws an \c{INVALID_STATE_ERR} exception.) You can then query the
    version by examining the database object's version property, for example:

    \code
    var version = db.version;
    \endcode

    Note that you don't need to close a client-side Web SQL database when
    you're done working with it.

    \section2 Transaction Calls and ExecuteSQL Method

    Performing database transactions is superior to running SQL statements
    directly because transactions are not committed if they fail and you can
    undo them if needed. Transactions also allow you to handle errors using a
    callback. To implement a transaction, specify a callback function such as
    the following:

    \code
    db.transaction(function (tx) {
      // SQL details on the tx object go here
    }
    \endcode

    The \c{transaction()} method takes one to three arguments:

    \list
    \o a required transaction callback, in which \c{executeSQL()} calls
    belong
    \o an optional transaction error object
    \o an optional success callback.
    \endlist

    Use the \c{executeSQL()} method to specify SQL statements for read and write
    operations. The method protects against SQL injection and provides a
    callback method to process the results of any SQL queries you specify. The
    \c{executeSQL()} method takes from one to four arguments:

    \list
    \o a required SQL statement
    \o an optional object array of arguments
    \o an optional SQL statement callback
    \o an optional SQL statement error callback
    \endlist

    The example below creates the database if it doesn't exist, adds a
    two-column table to the database, and adds a row of data to the table:

    \code
    var db = openDatabase('mydb', '1.0', 'my first database', 2 * 1024 * 1024);
    db.transaction(function (tx) {
        tx.executeSql('CREATE TABLE IF NOT EXISTS foo (id unique, text)');
        tx.executeSql('INSERT INTO foo (id, text) VALUES (1, "synergies")');
    });
    \endcode

    To capture data from the user or an external source, use \c{?} placeholders
    to map that data into the SQL query. This ensures the data doesn't
    compromise database security, for example from SQL injection:

    \code
    tx.executeSql('INSERT INTO foo (id, text) VALUES (?, ?)', [id, value]);
    \endcode

    \c{id} and \c{value} are external variables, and \c{executeSql} maps
    the items in the array to the \c{?}s.

    To select values from the table, use a callback to capture the results:

    \code
    tx.executeSql('SELECT * FROM foo', [], function(tx, results) {
        for (var i = 0 , len = results.rows.length; i < len; i++) {
            // do something with results.rows.item(i).text
        }
    });
    \endcode

    No fields are mapped in the above query, but to use the third argument you
    need to pass in an empty array as the second argument.

    The SQL statement callback for \c{executeSQL()} is called with the
    \c{transaction} object and a SQL statement \c{result} object. The \c{result}
    gives access to the ID of the last inserted row, the number of rows
    affected, and an indexed list representing the rows returned, in the order
    returned.

    The \c{result} object contains an array-like \c{rows} object. It has a
    length, but to access individual rows you need to use
    \c{results.rows.item(i)}, where \c{i} is the index of the row. This returns
    an object representation of each row. For example, if your database has a
    \c{name} and an \c{age} field, the \c{row} contains a \c{name} and an
    \c{age} property. The value of the \c{age} field can be accessed using
    \c{results.rows.item(i).age}.

    \section2 Changing Database Versions

    Each database has one version at a time and multiple versions cannot exist
    at one time. Versions allow you to manage schema changes incrementally.

    You can change the version of a client-side Web SQL database using the
    \c{changeversion()} method:

    \code
    if (db.version == "1.0") {
        try {
            // comment out for crash recovery.
            db.changeVersion("1.0", "2.0", cv_1_0_2_0, oops_1_0_2_0, success_1_0_2_0);
        } catch(e) {
            alert('changeversion 1.0 -> 2.0 failed');
            alert('DB Version: '+db.version);
        }
    }
    \endcode

    \c{changeversion()} takes the following arguments: required old and new
    version numbers, optional SQL transaction callback, optional SQL transaction
    error callback, and optional success callback.

    \section2 Errors

    Asynchronous API errors are reported using callbacks that have a
    \c{SQLError} object as one of their arguments. \c{SQLError} contains a code
    from the table below and a localized message string.

    Error codes are:

    \list
    \o 0 \c{UNKNOWN_ERROR} Transaction failed for reasons unrelated to the DB
    \o 1 \c{DATABASE_ERROR} Statement failed for DB reasons not covered by other
    code
    \o 2 \c{VERSION_ERROR} DB version doesn't match expected version
    \o 3 \c{TOO_LARGE_ERROR} Data returned from DB was too large. Try the
    \c{SQL LIMIT} modifier.
    \o 4 \c{QUOTA_ERROR} Insufficient remaining storage
    \o 5 \c{SYNTAX_ERROR} Syntax error, argument mismatch, or unallowed
    statement
    \o 6 \c{CONSTRAINT_ERROR} An \c{INSERT}, \c{UPDATE}, or \c{REPLACE}
    statement failed due to a constraint error
    \o 7 \c{TIMEOUT_ERROR} Timeout waiting for transaction lock
    \endlist

    \bold{See Also:}
    \l{HTML5 Doctor: Introducing Web SQL Databases}

\list
\o \l{QtWebKit Guide} -back to the main page
\endlist
*/

*/