summaryrefslogtreecommitdiffstats
path: root/doc/user/install.in
diff options
context:
space:
mode:
Diffstat (limited to 'doc/user/install.in')
-rw-r--r--doc/user/install.in240
1 files changed, 240 insertions, 0 deletions
diff --git a/doc/user/install.in b/doc/user/install.in
new file mode 100644
index 0000000..a263f65
--- /dev/null
+++ b/doc/user/install.in
@@ -0,0 +1,240 @@
+<!--
+
+ Copyright (c) 2001, 2002, 2003 Steven Knight
+
+ Permission is hereby granted, free of charge, to any person obtaining
+ a copy of this software and associated documentation files (the
+ "Software"), to deal in the Software without restriction, including
+ without limitation the rights to use, copy, modify, merge, publish,
+ distribute, sublicense, and/or sell copies of the Software, and to
+ permit persons to whom the Software is furnished to do so, subject to
+ the following conditions:
+
+ The above copyright notice and this permission notice shall be included
+ in all copies or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
+ KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
+ WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+ LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+ OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+ WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+-->
+
+ <para>
+
+ Once a program is built,
+ it is often appropriate to install it in another
+ directory for public use.
+ You use the &Install; method
+ to arrange for a program, or any other file,
+ to be copied into a destination directory:
+
+ </para>
+
+ <scons_example name="ex1">
+ <file name="SConstruct" printme="1">
+ env = Environment()
+ hello = env.Program('hello.c')
+ env.Install('__ROOT__/usr/bin', hello)
+ </file>
+ <file name="hello.c">
+ int main() { printf("Hello, world!\n"); }
+ </file>
+ </scons_example>
+
+ <para>
+
+ Note, however, that installing a file is
+ still considered a type of file "build."
+ This is important when you remember that
+ the default behavior of &SCons; is
+ to build files in or below the current directory.
+ If, as in the example above,
+ you are installing files in a directory
+ outside of the top-level &SConstruct; file's directory tree,
+ you must specify that directory
+ (or a higher directory, such as <literal>/</literal>)
+ for it to install anything there:
+
+ </para>
+
+ <scons_output example="ex1">
+ <command>scons</command>
+ <command>scons __ROOT__/usr/bin</command>
+ </scons_output>
+
+ <para>
+
+ It can, however, be cumbersome to remember
+ (and type) the specific destination directory
+ in which the program (or any other file)
+ should be installed.
+ This is an area where the &Alias;
+ function comes in handy,
+ allowing you, for example,
+ to create a pseudo-target named <literal>install</literal>
+ that can expand to the specified destination directory:
+
+ </para>
+
+ <scons_example name="ex2">
+ <file name="SConstruct" printme="1">
+ env = Environment()
+ hello = env.Program('hello.c')
+ env.Install('__ROOT__/usr/bin', hello)
+ env.Alias('install', '__ROOT__/usr/bin')
+ </file>
+ <file name="hello.c">
+ int main() { printf("Hello, world!\n"); }
+ </file>
+ </scons_example>
+
+ <para>
+
+ This then yields the more natural
+ ability to install the program
+ in its destination as follows:
+
+ </para>
+
+ <scons_output example="ex1">
+ <command>scons</command>
+ <command>scons install</command>
+ </scons_output>
+
+ <section>
+ <title>Installing Multiple Files in a Directory</title>
+
+ <para>
+
+ You can install multiple files into a directory
+ simply by calling the &Install; function multiple times:
+
+ </para>
+
+ <scons_example name="ex3">
+ <file name="SConstruct" printme="1">
+ env = Environment()
+ hello = env.Program('hello.c')
+ goodbye = env.Program('goodbye.c')
+ env.Install('__ROOT__/usr/bin', hello)
+ env.Install('__ROOT__/usr/bin', goodbye)
+ env.Alias('install', '__ROOT__/usr/bin')
+ </file>
+ <file name="hello.c">
+ int main() { printf("Hello, world!\n"); }
+ </file>
+ </scons_example>
+
+ <para>
+
+ Or, more succinctly, listing the multiple input
+ files in a list
+ (just like you can do with any other builder):
+
+ </para>
+
+ <sconstruct>
+ env = Environment()
+ hello = env.Program('hello.c')
+ goodbye = env.Program('goodbye.c')
+ env.Install('__ROOT__/usr/bin', [hello, goodbye])
+ env.Alias('install', '__ROOT__/usr/bin')
+ </sconstruct>
+
+ <para>
+
+ Either of these two examples yields:
+
+ </para>
+
+ <scons_output example="ex3">
+ <command>scons install</command>
+ </scons_output>
+
+ </section>
+
+ <section>
+ <title>Installing a File Under a Different Name</title>
+
+ <para>
+
+ The &Install; method preserves the name
+ of the file when it is copied into the
+ destination directory.
+ If you need to change the name of the file
+ when you copy it, use the &InstallAs; function:
+
+ </para>
+
+ <scons_example name="ex4">
+ <file name="SConstruct" printme="1">
+ env = Environment()
+ hello = env.Program('hello.c')
+ env.InstallAs('__ROOT__/usr/bin/hello-new', hello)
+ env.Alias('install', '__ROOT__/usr/bin')
+ </file>
+ <file name="hello.c">
+ int main() { printf("Hello, world!\n"); }
+ </file>
+ </scons_example>
+
+ <para>
+
+ This installs the <literal>hello</literal>
+ program with the name <literal>hello-new</literal>
+ as follows:
+
+ </para>
+
+ <scons_output example="ex4">
+ <command>scons install</command>
+ </scons_output>
+
+ </section>
+
+ <section>
+ <title>Installing Multiple Files Under Different Names</title>
+
+ <para>
+
+ Lastly, if you have multiple files that all
+ need to be installed with different file names,
+ you can either call the &InstallAs; function
+ multiple times, or as a shorthand,
+ you can supply same-length lists
+ for the both the target and source arguments:
+
+ </para>
+
+ <scons_example name="ex5">
+ <file name="SConstruct" printme="1">
+ env = Environment()
+ hello = env.Program('hello.c')
+ goodbye = env.Program('goodbye.c')
+ env.InstallAs(['__ROOT__/usr/bin/hello-new',
+ '__ROOT__/usr/bin/goodbye-new'],
+ [hello, goodbye])
+ </file>
+ <file name="hello.c">
+ int main() { printf("Hello, world!\n"); }
+ </file>
+ </scons_example>
+
+ <para>
+
+ In this case, the &InstallAs; function
+ loops through both lists simultaneously,
+ and copies each source file into its corresponding
+ target file name:
+
+ </para>
+
+ <scons_output example="ex5">
+ <command>scons install</command>
+ </scons_output>
+
+ </section>