diff options
Diffstat (limited to 'test/TEX')
| -rw-r--r-- | test/TEX/build_dir_dup0.py | 257 | ||||
| -rw-r--r-- | test/TEX/multi-run.py | 88 |
2 files changed, 344 insertions, 1 deletions
diff --git a/test/TEX/build_dir_dup0.py b/test/TEX/build_dir_dup0.py new file mode 100644 index 0000000..8035957 --- /dev/null +++ b/test/TEX/build_dir_dup0.py @@ -0,0 +1,257 @@ +#!/usr/bin/env python +# +# __COPYRIGHT__ +# +# Permission is hereby granted, free of charge, to any person obtaining +# a copy of this software and associated documentation files (the +# "Software"), to deal in the Software without restriction, including +# without limitation the rights to use, copy, modify, merge, publish, +# distribute, sublicense, and/or sell copies of the Software, and to +# permit persons to whom the Software is furnished to do so, subject to +# the following conditions: +# +# The above copyright notice and this permission notice shall be included +# in all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY +# KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE +# WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +# NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE +# LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION +# OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +# WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +# + +__revision__ = "__FILE__ __REVISION__ __DATE__ __DEVELOPER__" + +""" +Test creation of a fully-featured TeX document (with bibliography +and index) in a build_dir. + +Test courtesy Rob Managan. +""" + +import TestSCons + +test = TestSCons.TestSCons() + +latex = test.where_is('latex') +dvipdf = test.where_is('dvipdf') +makeindex = test.where_is('makeindex') +bibtex = test.where_is('bibtex') +if not latex or not makeindex or not bibtex or not dvipdf: + test.skip_test("Could not find 'latex', 'makeindex', 'bibtex', or dvipdf; skipping test.\n") + +test.subdir(['docs']) + + +test.write(['SConstruct'], """\ +import os + +env = Environment(ENV = { 'PATH' : os.environ['PATH'] }, + TOOLS = ['tex', 'latex', 'dvipdf']) +Export(['env']) + +SConscript(os.path.join('docs', 'SConscript'), + build_dir=os.path.join('mybuild','docs'), + duplicate=0) +""") + + +test.write(['docs', 'SConscript'], """\ +Import('env') + +test_dvi = env.DVI(source='test.tex') +testpdf = env.PDF(source=test_dvi) +""") + + +test.write(['docs', 'Fig1.ps'], """\ +%!PS-Adobe-2.0 EPSF-2.0 +%%Title: Fig1.fig +%%Creator: fig2dev Version 3.2 Patchlevel 4 +%%CreationDate: Tue Apr 25 09:56:11 2006 +%%BoundingBox: 0 0 98 98 +%%Magnification: 1.0000 +%%EndComments +/$F2psDict 200 dict def +$F2psDict begin +$F2psDict /mtrx matrix put +/col-1 {0 setgray} bind def +/col0 {0.000 0.000 0.000 srgb} bind def + +end +save +newpath 0 98 moveto 0 0 lineto 98 0 lineto 98 98 lineto closepath clip newpath +-24.9 108.2 translate +1 -1 scale + +/cp {closepath} bind def +/ef {eofill} bind def +/gr {grestore} bind def +/gs {gsave} bind def +/rs {restore} bind def +/l {lineto} bind def +/m {moveto} bind def +/rm {rmoveto} bind def +/n {newpath} bind def +/s {stroke} bind def +/slc {setlinecap} bind def +/slj {setlinejoin} bind def +/slw {setlinewidth} bind def +/srgb {setrgbcolor} bind def +/sc {scale} bind def +/sf {setfont} bind def +/scf {scalefont} bind def +/tr {translate} bind def + /DrawEllipse { + /endangle exch def + /startangle exch def + /yrad exch def + /xrad exch def + /y exch def + /x exch def + /savematrix mtrx currentmatrix def + x y tr xrad yrad sc 0 0 1 startangle endangle arc + closepath + savematrix setmatrix + } def + +/$F2psBegin {$F2psDict begin /$F2psEnteredState save def} def +/$F2psEnd {$F2psEnteredState restore end} def + +$F2psBegin +10 setmiterlimit + 0.06299 0.06299 sc +% +% Fig objects follow +% +7.500 slw +% Ellipse +n 1170 945 766 766 0 360 DrawEllipse gs col0 s gr + +$F2psEnd +rs +""") + + +test.write(['docs', 'Fig1.tex'], +r"""\begin{picture}(0,0)% +\includegraphics{Fig1.ps}% +\end{picture}% +\setlength{\unitlength}{4144sp}% +% +\begingroup\makeatletter\ifx\SetFigFont\undefined% +\gdef\SetFigFont#1#2#3#4#5{% + \reset@font\fontsize{#1}{#2pt}% + \fontfamily{#3}\fontseries{#4}\fontshape{#5}% + \selectfont}% +\fi\endgroup% +\begin{picture}(1548,1546)(397,-879) +\put(856,-196){\makebox(0,0)[lb]{\smash{\SetFigFont{12}{14.4}{\rmdefault}{\mddefault}{\updefault}{\color[rgb]{0,0,0}center $r_0$}% +}}} +\end{picture} +""") + + +test.write(['docs', 'test.bib'], """\ +%% This BibTeX bibliography file was created using BibDesk. +%% http://bibdesk.sourceforge.net/ + +%% Saved with string encoding Western (ASCII) + +@techreport{AnAuthor:2006fk, + Author = {A. N. Author}, + Date-Added = {2006-11-15 12:51:30 -0800}, + Date-Modified = {2006-11-15 12:52:35 -0800}, + Institution = {none}, + Month = {November}, + Title = {A Test Paper}, + Year = {2006}} +""") + + +test.write(['docs', 'test.tex'], +r"""\documentclass{report} + +\usepackage{graphicx} +\usepackage{epsfig,color} % for .tex version of figures if we go that way + +\usepackage{makeidx} +\makeindex + +\begin{document} + +\title{Report Title} + +\author{A. N. Author} + +\maketitle + +\begin{abstract} +there is no abstract +\end{abstract} + +\tableofcontents +\listoffigures + +\chapter{Introduction} + +The introduction is short. + +\index{Acknowledgements} + +\section{Acknowledgements} + +The Acknowledgements are show as well \cite{AnAuthor:2006fk}. + +\index{Getting the Report} + +To get a hard copy of this report call me. + +\begin{figure}[htbp] +\begin{center} +\input{Fig1.tex} % testing figure variant that uses TeX labeling +\caption{Zone and Node indexing} +\label{fig1} +\end{center} +\end{figure} + +All done now. + +\bibliographystyle{unsrt} +\bibliography{test} +\newpage + +\printindex + +\end{document} +""") + + +# makeindex will write status messages to stderr (grrr...), so ignore it. +test.run(arguments = '.', stderr=None) + + +# All (?) the files we expect will get created in the build_dir +# (mybuild/docs) and not in the srcdir (docs). +files = [ + 'test.aux', + 'test.bbl', + 'test.blg', + 'test.dvi', + 'test.idx', + 'test.ilg', + 'test.ind', + 'test.lof', + 'test.log', + 'test.pdf', + 'test.toc', +] + +for f in files: + test.must_exist(['mybuild', 'docs', f]) + test.must_not_exist(['docs', f]) + + +test.pass_test() diff --git a/test/TEX/multi-run.py b/test/TEX/multi-run.py index d4e2d79..686263d 100644 --- a/test/TEX/multi-run.py +++ b/test/TEX/multi-run.py @@ -28,6 +28,8 @@ __revision__ = "__FILE__ __REVISION__ __DATE__ __DEVELOPER__" Validate that both .tex and .ltx files can handle a LaTeX-style bibliography (by calling $BIBTEX to generate a .bbl file) and correctly re-run to resolve undefined references. + +Also verifies that package warnings are caught and re-run as needed. """ import string @@ -42,7 +44,7 @@ latex = test.where_is('latex') if not tex and not latex: test.skip_test("Could not find tex or latex; skipping test(s).\n") -test.subdir('work1', 'work2', 'work4') +test.subdir('work1', 'work2', 'work3', 'work4') input_file = r""" @@ -64,6 +66,62 @@ Hello world. \end{document} """ +input_file3 = r""" +\documentclass{article} +\usepackage{longtable} + +\begin{document} +As stated in the last paper, this is a bug-a-boo. +here is some more junk and another table +here is some more junk and another table + +\begin{longtable}[l]{rlll} + Isotope &\multicolumn{1}{c}{Abar} &Name\\ +\\ + 1001 &1.0078 &Proton &$p$\\ + 1002 &2.0141 &Deuterium &$d$\\ + 1003 &3.0170 &Tritium &$t$\\ + 2003 &3.0160 &Helium 3 &He$^3$\\ + 2004 &4.0026 &Helium 4 &He$^{4}$\\ +\end{longtable} + +and a closing comment + + These parameters and arrays are filled in when the parameter \textbf{iftnrates} + is set to 1: + +\begin{longtable}[l]{ll} +\\ +\textbf{nxxxx} &Total number of particles made by xxxx reaction\\ +\textbf{pxxxx} &Total number of particles made by xxxx reaction\\ +\textbf{nxxxxx} &Total number of particles made by xxxxx reaction\\ +\textbf{nxxxx} &Total number of particles made by xxxx reaction\\ +\textbf{pxxxx} &Total number of particles made by xxxx reaction\\ +\textbf{nxxxx} &Total number of particles made by xxxx reaction\\ +\textbf{pxxxx} &Total number of particles made by xxxx reaction\\ +\textbf{nxxxxx} &Total number of particles made by xxxxx reaction\\ +\textbf{nxxxx} &Total number of particles made by xxxx reaction\\ +\textbf{pxxxx} &Total number of particles made by xxxx reaction\\ +\\ +\textbf{rnxxxx} &Regional total of particles made by xxxx reaction\\ +\textbf{rpxxxx} &Regional total of particles made by xxxx reaction\\ +\textbf{rnxxxxx} &Regional total of particles made by xxxxx reaction\\ +\textbf{rnxxxx} &Regional total of particles made by xxxx reaction\\ +\textbf{rpxxxx} &Regional total of particles made by xxxx reaction\\ +\textbf{rnxxxx} &Regional total of particles made by xxxx reaction\\ +\textbf{rpxxxx} &Regional total of particles made by xxxx reaction\\ +\textbf{rnxxxxx} &Regional total of particles made by xxxxx reaction\\ +\textbf{rnxxxx} &Regional total of particles made by xxxx reaction\\ +\textbf{rpxxxx} &Regional total of particles made by xxxx reaction\\ +\\ +\textbf{reactot}(r) &Total number of reactions for reaction r\\ +\textbf{reacreg}(r,ir) &Total number of reactions for reaction r in region ir\\ +\end{longtable} + + +\end{document} +""" + bibfile = r""" @Article{X, author = "Mr. X", @@ -95,6 +153,20 @@ PDF( "foo.tex" ) print foo_log test.fail_test(1) + test.write(['work3', 'SConstruct'], """\ +DVI( "foo3.tex" ) +""") + + test.write(['work3', 'foo3.tex'], input_file3) + + test.run(chdir = 'work3', arguments = '.') + + foo_log = test.read(['work3', 'foo3.log']) + if string.find(foo_log, 'Rerun LaTeX') != -1: + print 'foo.log contains "Rerun LaTeX":' + print foo_log + test.fail_test(1) + if latex: @@ -117,6 +189,20 @@ PDF( "foo.ltx" ) print foo_log test.fail_test(1) + test.write(['work3', 'SConstruct'], """\ +DVI( "foo3.tex" ) +PDF( "foo3.tex" ) +""") + + test.write(['work3', 'foo3.tex'], input_file3) + + test.run(chdir = 'work3', arguments = '.') + + foo_log = test.read(['work3', 'foo3.log']) + if string.find(foo_log, 'Rerun LaTeX') != -1: + print 'foo.log contains "Rerun LaTeX":' + print foo_log + test.fail_test(1) test.write(['work4', 'SConstruct'], """\ |