diff options
author | William Joye <wjoye@cfa.harvard.edu> | 2016-11-17 21:09:46 (GMT) |
---|---|---|
committer | William Joye <wjoye@cfa.harvard.edu> | 2016-11-17 21:09:46 (GMT) |
commit | fc7f7edd0b8011cb71573b15462ef83068d9e54b (patch) | |
tree | 459fb7d1a9611f563e3000386df5cb7cdf506916 /libxml2/VxWorks | |
parent | 4f65b25b474bf534e40c3d3aa47d43e8457fcc9a (diff) | |
download | blt-fc7f7edd0b8011cb71573b15462ef83068d9e54b.zip blt-fc7f7edd0b8011cb71573b15462ef83068d9e54b.tar.gz blt-fc7f7edd0b8011cb71573b15462ef83068d9e54b.tar.bz2 |
local fork libxml2
Diffstat (limited to 'libxml2/VxWorks')
-rw-r--r-- | libxml2/VxWorks/Makefile | 68 | ||||
-rw-r--r-- | libxml2/VxWorks/README | 86 | ||||
-rw-r--r-- | libxml2/VxWorks/build.sh | 85 |
3 files changed, 0 insertions, 239 deletions
diff --git a/libxml2/VxWorks/Makefile b/libxml2/VxWorks/Makefile deleted file mode 100644 index a1f6902..0000000 --- a/libxml2/VxWorks/Makefile +++ /dev/null @@ -1,68 +0,0 @@ -##----------------------------------------------------------------
-##
-##-- Filename: Makefile
-##
-##-- $Date: 2008/02/23 02:56:17 $
-##-- $Revision: 1.2 $
-##-- $Name: $
-##
-##----------------------------------------------------------------
-
-NAME = xml2
-TOOL_FAMILY=gnu
-
-include $(WIND_USR)/tool/gnu/make.$(VXCPU)
-
-FLAGS = -Wall -g -Isrc -Isrc/include -D_REENTRANT=1
-#FLAGS = -Wall -O2 -Isrc -Isrc/include -D_REENTRANT=1
-
-FLAGS += $(DEFINE_CC) $(CC_ARCH_SPEC) -MD -MP -D_VX_CPU=_VX_$(CPU) -D_VX_TOOL_FAMILY=gnu -D_VX_TOOL=$(TOOL)
-ifeq ($(VXTYPE),RTP)
-FLAGS += -mrtp -fpic -I$(WIND_USR)/h -I$(WIND_USR)/h/wrn/coreip
-else
-FLAGS += -D_WRS_KERNEL -I$(WIND_BASE)/target/h -I$(WIND_BASE)/target/h/wrn/coreip
-endif
-
-ifeq ($(VXTYPE),RTP)
-ifeq ($(CPU),SH32)
-LIB_LDFLAGS += -L$(WIND_USR)/lib/sh/SH32/commonle/PIC
-else
-LIB_LDFLAGS += $(LD_LINK_PATH_ATEND) $(LD_PARTIAL_LAST_FLAGS)
-endif
-endif
-
-OBJS = c14n.o catalog.o chvalid.o \
- debugXML.o dict.o DOCBparser.o \
- encoding.o entities.o error.o \
- globals.o \
- hash.o \
- legacy.o list.o \
- parser.o parserInternals.o pattern.o \
- relaxng.o \
- SAX2.o SAX.o schematron.o \
- threads.o tree.o \
- uri.o \
- valid.o \
- xinclude.o xlink.o xmlcatalog.o xmlIO.o \
- xmlmemory.o xmlmodule.o xmlreader.o xmlregexp.o \
- xmlsave.o xmlschemas.o xmlschemastypes.o xmlstring.o \
- xmlunicode.o xmlwriter.o xpath.o xpointer.o
-
-all : lib$(NAME).so
-
-init :
- mkdir -p objs
-
-.PHONY : lib$(NAME).so
-
-lib$(NAME).so : init $(patsubst %.o, objs/%.o, $(OBJS))
- $(CC) $(FLAGS) $(LIB_LDFLAGS) -shared -o $@ $(patsubst %.o, objs/%.o, $(OBJS))
-
-(NAME).out : init $(patsubst %.o, objs/%.o, $(OBJS))
- $(CC) $(FLAGS) -o $@ $(patsubst %.o, objs/%.o, $(OBJS))
-
-objs/%.o: src/%.c
- $(CC) $(FLAGS) -o $@ -c $<
-
-clean:
- rm -fR *.so objs
diff --git a/libxml2/VxWorks/README b/libxml2/VxWorks/README deleted file mode 100644 index b756677..0000000 --- a/libxml2/VxWorks/README +++ /dev/null @@ -1,86 +0,0 @@ - libxml2 on VxWorks 6.4+ - -Here are my instructions for building on VxWorks.... I am very ashamed of -how I did this because it is a complete hack, but it works great, so I -can't complain too much. - -General Information - -1. The only way to build for VxWorks is to cross compile from a windows or -linux system. We use a RedHat 5.1 workstation system as our build -environment. - -2. VxWorks 6.X has two main types of executable, DKMs (dynamic kernel -modules), and RTPs (real-time processes). Kernel modules are the bread -and butter of VxWorks, but they look nothing like processes/threads in -normal UNIX/Windows systems. RTPs are more like processes that have -memory protection, threads, etc. VxWorks 6.X also introduces some level -of POSIX conformance to their environment. The POSIX conformance was the -key for us to be able to port libxml2. We support accessing libxml2 from -both DKMs and RTPs. - -3. There are 2 compilers for VxWorks, the WindRiver compiler, and a port -of the GNU toolchain, we have only tested and built with the GNU -toolchain. - -How To Build - -1. Run the configure on your native linux system (this is the cheesy -hack). Since the VxWorks GNU toolchain is very close in version to the -one in red hat, it generates a good config.h file. We configured libxml2 -with the following to keep the size down, (but we have done basic testing -with everything compiled in). - -./configure --with-minimum --with-reader --with-writer --with-regexps ---with-threads --with-thread-alloc - -2. Rename the libxml2 folder to "src". This step is required for our -replacement makefile to work. - -3. Run the replacement makefile. I wrote a new makefile that sets all the -proper vxworks defines and uses the correct compilers. The two defines on -the make command line are to tell it which VxWorks Target (SH3.2 little -endian), and the executable type. We have tested this code on PENTIUM2gnu -and SH32gnule. - -This makefile creates a shared library that runs on VxWorks: (libxml2.so) -make -f Makefile.vxworks clean all VXCPU=SH32gnule VXTYPE=RTP - -This makefile creates a kernel module that runs on VxWorks: (xml2.out) -make -f Makefile.vxworks clean all VXCPU=SH32gnule VXTYPE=DKM - -Important Notes - -1. There are several ways that this process could be improved, but at the -end of the day, we make products, not port libraries, so we did a meets -minimum for our needs. - -2. VxWorks is the devil, give me embedded linux every day. - -3. No matter what I tried, I couldn't get the configure to pick up the -VxWorks toolchain, and in my investigation, it has something to do with -automake/autoconf, not any individual package. VxWorks doesn't play by -the normal rules for building toolchains. - -4. The PIC flag in VxWorks (especially for SH processors) is very -important, and very troublesome. On linux, you can liberally use the PIC -flag when compiling and the compiler/linker will ignore it as needed, on -VxWorks if must always be on for shared libraries, and always be off for -static libraries and executables. - -5. If anyone wants to work on a better way to do the build of libxml2 for -VxWorks, I'm happy to help as much as I can, but I'm not looking to -support it myself. - -Attached Files - -1. To use my Makefile for vxworks, you should enter the vxworks -environment (/opt/windriver/wrenv.linux -p vxworks-6.4 for me). -2. Run: build.sh libxml2-2.6.32 SH32gnule RTP (where you have -libxml2-2.6.32.tar.gz and the Makefile in the same directory as the script -file). - -Thanks, - -Jim Wert Jr. -JWert@ILSTechnology.com diff --git a/libxml2/VxWorks/build.sh b/libxml2/VxWorks/build.sh deleted file mode 100644 index c195062..0000000 --- a/libxml2/VxWorks/build.sh +++ /dev/null @@ -1,85 +0,0 @@ -LIBXML2=$1
-TARGETCPU=$2
-TARGETTYPE=$3
-
-if [ -z "$2" ]; then
- TARGETCPU=SIMPENTIUMgnu
-fi
-
-if [ -z "$3" ]; then
- TARGETTYPE=RTP
-fi
-
-echo "LIBXML2 Version: ${LIBXML2}"
-echo "LIBXML2 Target CPU: ${TARGETCPU}"
-echo "LIBXML2 Target Type: ${TARGETTYPE}"
-
-rm -fR src
-tar xvzf ${LIBXML2}.tar.gz
-mv ${LIBXML2} src
-cd src
-
-./configure --with-minimum --with-reader --with-writer --with-regexps --with-threads --with-thread-alloc
-
-find . -name '*.in' -exec rm -fR {} +
-find . -name '*.am' -exec rm -fR {} +
-rm -fR *.m4
-rm -fR *.pc
-rm -fR *.pl
-rm -fR *.py
-rm -fR *.spec
-rm -fR .deps
-rm -fR AUTHORS
-rm -fR bakefile
-rm -fR ChangeLog
-rm -fR config.guess
-rm -fR config.log
-rm -fR config.status
-rm -fR config.stub
-rm -fR config.sub
-rm -fR configure
-rm -fR COPYING
-rm -fR Copyright
-rm -fR depcomp
-rm -fR doc
-rm -fR example
-rm -fR INSTALL
-rm -fR install-sh
-rm -fR libxml.3
-rm -fR ltmain.sh
-rm -fR Makefile
-rm -fR Makefile.tests
-rm -fR macos
-rm -fR mkinstalldirs
-rm -fR missing
-rm -fR nanoftp.c
-rm -fR nanohttp.c
-rm -fR NEWS
-rm -fR python
-rm -fR README
-rm -fR README.tests
-rm -fR regressions.xml
-rm -fR result
-rm -fR runsuite.c
-rm -fR runtest.c
-rm -fR test
-rm -fR test*.c
-rm -fR TODO*
-rm -fR trio*
-rm -fR vms
-rm -fR win32
-rm -fR xml2*
-rm -fR xmllint.c
-rm -fR xstc
-
-cd ..
-
-make clean all VXCPU=${TARGETCPU} VXTYPE=${TARGETTYPE}
-
-if [ "${TARGETTYPE}" = "RTP" ]; then
- cp libxml2.so ../../lib/.
-else
- cp xml2.out ../../bin/.
-fi
-
-cp -R src/include/libxml ../../include/.
\ No newline at end of file |