local fork libxml2

3 files changed, 0 insertions, 856 deletions

diff --git a/libxml2/bakefile/Bakefiles.bkgen b/libxml2/bakefile/Bakefiles.bkgen
deleted file mode 100644
index 8342de3..0000000
--- a/libxml2/bakefile/Bakefiles.bkgen
+++ /dev/null
@@ -1,15 +0,0 @@
-<?xml version="1.0" ?>

-<!-- $Id$ -->

-

-<bakefile-gen>

-    

-    <disable-formats>gnu,dmars,cbx_unix,cbuilderx</disable-formats>

-    <input>libxml2.bkl</input>

-

-    <!-- List of output formats to generate: -->

-    <add-formats>

-        borland,dmars,mingw,msvc,msvc6prj,watcom,cbuilderx,cbx_unix,gnu

-    </add-formats>

-

-

-</bakefile-gen>
\ No newline at end of file
diff --git a/libxml2/bakefile/Readme.txt b/libxml2/bakefile/Readme.txt
deleted file mode 100644
index 98a9ca8..0000000
--- a/libxml2/bakefile/Readme.txt
+++ /dev/null
@@ -1,92 +0,0 @@
-

- LIBXML2 build system for Win32 README

- -------------------------------------

-

- In this folder are stored all the files required to compile LIBXML2 with win32 compilers.

- Bakefile (http://bakefile.sourceforge.net) is used as makefile generator.

-

- Supported makefiles:

- - makefile.vc     for Microsoft NMAKE

- - makefile.bcc    for Borland MAKE

- - makefile.wat    for OpenWatcom MAKE

- - makefile.gcc    for MinGW MINGW32-MAKE

- - all DSP & DSW   for Microsoft VisualC++ 6.0 (can be used also with VS.NET AFAIK)

-

- This readme is organized as:

-   1.0 HOWTO compile LIBXML2 using makefiles     <-- for users who want to build the library using *command-line*

-   1.1 HOWTO compile LIBXML2 using an IDE        <-- for users who want to build the library using an *IDE*

-   1.2 HOWTO regenerate makefiles for LIBXML2    <-- for libxml2 mantainers/developers/advanced users

-

- If you just want to compile the library (and the test programs) you should definitely avoid the

- section 1.1 and focus on the 1.0.

- 

-

-

-

-

-

- 1.0 HOWTO compile LIBXML2 using makefiles

- -----------------------------------------

- 

- Choose your preferred compiler among those actually supported (see above) and then run

- 

-                              mycompilermake -fmakefile.makefileext [options]

-

- for a full list of the available options you should open with a notepad (or something like that)

- the makefile you want to use; at the beginning you should see a section which starts as:

-

-     # -------------------------------------------------------------------------

-     # These are configurable options:

-     # -------------------------------------------------------------------------

-

- here you can find all the options actually used by that makefile. 

- They can be customized when running the makefile writing something like:

-

- nmake -fmakefile.vc BUILD=release

- mingw32-make -fmakefile.gcc BUILD=debug ICONV_DIR=c:\myiconv

-

- or they can be permanently changed modifying the makefile.

- That's all: for any problem/compile-error/suggestion, write to 

- frm@users.sourceforge.net with the word "libxml2" in the subject.

-

-

-

-

-

- 1.1 HOWTO compile LIBXML2 using an IDE

- --------------------------------------

- 

- Actually only the Microsoft VisualC++ 6.0 project files are generated.

- In future other Integrated Development Environments (IDEs) will be supported as well.

- 

- With MSVC++ 6.0, you should open the DSW file and then set as the active project the

- "libxml2" project, if you want to build the library or one of the test projects if you

- want to run them.

- Using the command "Build->Set Active Configuration" you can choose one of the predefined

- configuration.

-

-

-

-

-

- 1.2 HOWTO regenerate makefiles for LIBXML2

- ------------------------------------------

- 

- Be sure to have installed Bakefile (http://bakefile.sourceforge.net).

- Just run the "bakefile_gen" command inside the folder containing the "libxml2.bkl" file.

- NOTE: if you want to remove all the makefiles, you can use the "bakefile_gen -c" command.

- 

- The template files used to generate all makefiles are only two:

- - libxml2.bkl      (the main one)

- - Bakefiles.bkgen

- All the other files can be dinamically regenerated.

-

-

-

-

-

- If you have problems with the compilation of LIBXML2 under windows (using one of the supported compiler)

- please write to:

-

-     Francesco Montorsi <frm@users.sourceforge.net>

-

diff --git a/libxml2/bakefile/libxml2.bkl b/libxml2/bakefile/libxml2.bkl
deleted file mode 100644
index f314465..0000000
--- a/libxml2/bakefile/libxml2.bkl
+++ /dev/null
@@ -1,749 +0,0 @@
-<?xml version="1.0" ?>

-

-<!-- Author: Francesco Montorsi <frm@users.sourceforge.net>         -->

-<!-- Date: 30/8/2004                                                -->

-<!-- Last revision: 26/1/2005                                       -->

-

-

-<!--                    LIBXML2 BAKEFILE                            -->

-<!--                                                                -->

-<!--    The bakefile used to build the library and the test         -->

-<!--    programs. The makefiles output is put:                      -->

-<!--                                                                -->

-<!--    - in the ..\LIB folder                                      -->

-<!--    - in the ..\BIN folder                                      -->

-<!--                                                                -->

-

-<makefile>

-

-    <using module="datafiles"/>

-    <requires version="0.1.5"/>

-    

-

-    <!-- This is a bakefile, that is, a generic template used to    -->

-    <!-- generate makefiles ALL supported compilers.                -->

-    <!-- To use this project file you need Bakefile installed.      -->

-    <!-- With the command "bakefile_gen" you can regen all the      -->

-    <!-- makefiles and project files.                               -->

-    <!-- See http://bakefile.sourceforge.net for more info.         -->

-

-

-	<!--

-	 This file is divided in:

-		- generic options

-		- generic variables

-		- libxml2 options

-		- libxml2 variables

-		- about config.h creation

-		- templates

-		- libxml2 library target

-		- libxml2 test program targets

-	-->

-

-

-

-    <!--                                                            -->

-    <!--                      GENERIC OPTIONS                       -->

-    <!--                                                            -->

-

-     

-    <!--    This is a standard option that determines               -->

-    <!--    whether the user wants to build this library as         -->

-    <!--    a dll or as a static library.                           -->

-    <option name="SHARED">

-        <values>0,1</values>

-        <values-description>,DLL</values-description>

-        <default-value>0</default-value>

-        <description>If set to zero a STATIC libxml library will be built</description>

-    </option>

-

-    <!-- Configuration for building the bakefile with               -->

-    <!-- unicode strings or not (unicode or ansi).                  -->

-    <option name="UNICODE">

-        <values>0,1</values>

-        <values-description>,Unicode</values-description>

-        <default-value>0</default-value>        

-        <description>Compile Unicode build?</description>

-    </option>

-

-

-    <!-- There are several options that deal with build             -->

-    <!-- types. First, there's this one, BUILD.                     -->

-    <!--                                                            -->

-    <!-- BUILD determines whether or not we want to build           -->

-    <!-- in release or debug mode.  Note that in practice           -->

-    <!-- this means modifying the optimize tag, which by            -->

-    <!-- default is set to off.  In this case debug means           -->

-    <!-- off (no optimizations), and release means speed            -->

-    <!-- (fast with inlining).  There is also a size option         -->

-    <!-- that is not addressed in this example bakefile.            -->

-    <option name="BUILD">

-        <values>debug,release</values>

-        <values-description>Debug,Release</values-description>

-        <default-value>release</default-value>

-        <description>

-            Type of compiled binaries

-        </description>

-    </option>

-

-

-

-    <!--                                                            -->

-    <!--                    GENERIC VARIABLES                       -->

-    <!--                                                            -->

-

-    <!--    Set the ISDLL variable, so that we can use it           -->

-    <!--    inside an if statement later on (options not            -->

-    <!--    allowed in if statements).                              -->

-    <set var="ISDLL" cond="SHARED=='1'">1</set>

-    <set var="ISDLL" cond="SHARED=='0'">0</set>

-

-    <!--    The unicode define we want.  By default bakefile        -->

-    <!--    makes variables an empty string, so if unicode          -->

-    <!--    is not defined $(UNICODE_DEFINE) would expand           -->

-    <!--    to nothing (literally).                                 -->

-    <set var="UNICODE_DEFINE">

-        <if cond="FORMAT!='autoconf' and UNICODE=='1'">_UNICODE</if>

-    </set>    

-    

-    <!--    The debug define we need with win32 compilers           -->    

-    <!--    (on Linux, the wx-config program is used).              -->    

-    <set var="DEBUG_DEFINE">        

-        <if cond="FORMAT!='autoconf' and BUILD=='debug'">

-            __WXDEBUG__

-        </if>    

-    </set>

-

-    <!--    Value we will use later on for the debug-info           -->

-    <!--    tag inside our templates.                               -->

-    <set var="DEBUGINFO">

-        <if cond="BUILD=='debug'">on</if>

-        <if cond="BUILD=='release'">off</if>

-    </set>

-

-    <!--    Value we will use later on for the debug-runtime        -->

-    <!--    tag inside our templates.                               -->

-    <set var="DEBUGRUNTIME">

-        <if cond="BUILD=='debug'">on</if>

-        <if cond="BUILD=='release'">off</if>

-    </set>

-

-    <!--    Value for optimize tag.                                 -->

-    <set var="OPTIMIZEFLAG">

-        <if cond="BUILD=='debug'">off</if>

-        <if cond="BUILD=='release'">speed</if>

-    </set>

-

-    <!-- Level of warnings.  Here we max it out in debug            -->

-    <!-- mode, and turn them off in release mode.                   -->

-    <set var="WARNINGS">

-        <if cond="BUILD=='debug'">max</if>

-        <if cond="BUILD=='release'">no</if>

-    </set>

-

-    <!-- Set MYCPPFLAGS as empty; maybe it will be filled later...  -->

-    <set var="MYCPPFLAGS"></set>

-    <if cond="FORMAT=='mingw' or FORMAT=='autoconf'">

-

-        <!-- With GCC, settings warnings to MAX would force         -->

-        <!-- Bakefile to call GCC with "-W -Wall" which generates   -->

-        <!-- a *lot* of warnings about wxWidgets headers...         -->

-        <!-- this is why "-W -Wall" is here replaced by "-Wall".    -->

-        <set var="WARNINGS">default</set>

-        <set var="MYCPPFLAGS">-Wall</set>

-    </if>

-    

-    

-    

-  

-

-

-    <!--                                                            -->

-    <!--                      LIBXML2 OPTIONS                       -->

-    <!--                                                            -->

-    <!-- Note #1: not all of them are used by win32 makefiles       -->

-	<!--                                                            -->

-	<!-- Note #2: since all combinations of non-path options are    -->

-	<!--          translated into different 'configurations' by     -->

-	<!--          Bakefile when using the MSVC6PRJ output, we must  -->

-	<!--          avoid to create a 10 MB libxml2.dsp file forcing  -->

-	<!--          some options to their default values... this      -->

-	<!--          behaviour can be overridden by the                -->

-	<!--                        FULL_OPTIONS_SUPPORT                -->

-	<!--          variable defined below...                         -->

-    

-	<set var="FULL_OPTIONS_SUPPORT">

-		<if cond="FORMAT=='msvc6prj'">0</if>

-		<if cond="FORMAT!='msvc6prj'">1</if>

-	</set>

-

-    <option name="ICONV_DIR" category="path">

-        <default-value>c:\iconv</default-value>

-        <description>The iconv library main folder</description>

-    </option>

-

-    <option name="WITH_TRIO">

-    	<values>0,1</values>

-        <default-value>0</default-value>

-        <description>Enable TRIO string manipulator</description>

-    </option>

-

-	<!-- see the note #2 -->

-	<if cond="FULL_OPTIONS_SUPPORT=='0'">

-		<set var="WITH_THREADS">native</set>

-	</if>

-	<if cond="FULL_OPTIONS_SUPPORT=='1'">

-		<option name="WITH_THREADS">

-    		<values>no,ctls,native,posix</values>

-			<default-value>native</default-value>

-			<description>Enable thread safety</description>

-		</option>

-    </if>

-

-    <option name="WITH_FTP">

-    	<values>0,1</values>

-        <default-value>1</default-value>

-        <description>Enable FTP client</description>

-    </option>

-

-    <option name="WITH_HTTP">

-    	<values>0,1</values>

-        <default-value>1</default-value>

-        <description>Enable HTTP client</description>

-    </option>

-

-    <option name="WITH_C14N">

-    	<values>0,1</values>

-        <default-value>1</default-value>

-        <description>Enable C14N support</description>

-    </option>

-

-    <option name="WITH_CATALOG">

-    	<values>0,1</values>

-        <default-value>1</default-value>

-        <description>Enable catalog support</description>

-    </option>

-

-    <option name="WITH_DOCB">

-    	<values>0,1</values>

-        <default-value>1</default-value>

-        <description>Enable DocBook support</description>

-    </option>

-	

-    <option name="WITH_XPATH">

-    	<values>0,1</values>

-        <default-value>1</default-value>

-        <description>Enable XPath support</description>

-    </option>

-	

-    <option name="WITH_XPTR">

-    	<values>0,1</values>

-        <default-value>1</default-value>

-        <description>Enable XPointer support</description>

-    </option>

-	

-    <option name="WITH_XINCLUDE">

-    	<values>0,1</values>

-        <default-value>1</default-value>

-        <description>Enable XInclude support</description>

-    </option>

-	

-	<!-- see the note #2 -->

-	<if cond="FULL_OPTIONS_SUPPORT=='0'">

-		<set var="WITH_ICONV">1</set>

-	</if>

-	<if cond="FULL_OPTIONS_SUPPORT=='1'">

-		<option name="WITH_ICONV">

-    		<values>0,1</values>

-			<default-value>1</default-value>

-			<description>Enable iconv support</description>

-		</option>

-	</if>

-	

-    <option name="WITH_ISO8859X">

-    	<values>0,1</values>

-        <default-value>0</default-value>

-        <description>Enable iso8859x support</description>

-    </option>

-	

-	<!-- see the note #2 -->

-	<if cond="FULL_OPTIONS_SUPPORT=='0'">

-		<set var="WITH_ZLIB">0</set>

-	</if>

-	<if cond="FULL_OPTIONS_SUPPORT=='1'">

-		<option name="WITH_ZLIB">

-    		<values>0,1</values>

-			<default-value>0</default-value>

-			<description>Enable ZLIB support</description>

-		</option>

-	</if>

-	

-    <option name="WITH_REGEXPS">

-    	<values>0,1</values>

-        <default-value>1</default-value>

-        <description>Enable regular expressions</description>

-    </option>

-	

-    <option name="WITH_TREE">

-    	<values>0,1</values>

-        <default-value>1</default-value>

-        <description>Enable tree api</description>

-    </option>

-	

-    <option name="WITH_READER">

-    	<values>0,1</values>

-        <default-value>1</default-value>

-        <description>Enable xmlReader api</description>

-    </option>

-	

-    <option name="WITH_WRITER">

-    	<values>0,1</values>

-        <default-value>1</default-value>

-        <description>Enable xmlWriter api</description>

-    </option>

-	

-    <option name="WITH_WALKER">

-    	<values>0,1</values>

-        <default-value>1</default-value>

-        <description>Enable xmlDocWalker api</description>

-    </option>    

-	

-    <option name="WITH_PATTERN">

-    	<values>0,1</values>

-        <default-value>1</default-value>

-        <description>Enable xmlPattern api</description>

-    </option>

-	

-    <option name="WITH_PUSH">

-    	<values>0,1</values>

-        <default-value>1</default-value>

-        <description>Enable push api</description>

-    </option>

-	

-    <option name="WITH_VALID">

-    	<values>0,1</values>

-        <default-value>1</default-value>

-        <description>Enable DTD validation support</description>

-    </option>

-	

-    <option name="WITH_SAX1">

-    	<values>0,1</values>

-        <default-value>1</default-value>

-        <description>Enable SAX1 api</description>

-    </option>    

-                	

-    <option name="WITH_SCHEMAS">

-    	<values>0,1</values>

-        <default-value>1</default-value>

-        <description>Enable XML Schema support</description>

-    </option>

-	

-    <option name="WITH_LEGACY">

-    	<values>0,1</values>

-        <default-value>1</default-value>

-        <description>Enable deprecated APIs</description>

-    </option>    

-                	

-    <option name="WITH_OUTPUT">

-    	<values>0,1</values>

-        <default-value>1</default-value>

-        <description>Enable serialization support</description>

-    </option>					

-                	

-    <option name="WITH_PYTHON">

-    	<values>0,1</values>

-        <default-value>0</default-value>

-        <description>Build Python bindings</description>

-    </option>

-

-

- 

-

-    <!--                                                            -->

-    <!--                    LIBXML2 VARIABLES                       -->

-    <!--                                                            -->   

-

-    <!-- Put all the objects files generated by         -->

-    <!-- the compilation in a subfolder of BUILD        -->

-    <set var="BUILDDIR">$(FORMAT)</set>

-    

-    <!-- This variable is set to 1 when the current output writer supports -->

-   	<!-- the __DEFINE_ARG variable. Otherwise it's set to zero. -->

-   	<set var="HAS_DEFINE_ARG">

-   		<if cond="FORMAT!='msvc6prj'">1</if>

-   		<if cond="FORMAT=='msvc6prj'">0</if>   		

-   	</set>

-

-	<!-- The root directory of libxml2 -->

-	<set var="XMLBASEDIR">..</set>

-	

-	<!-- The directory where libxml2' tests will be put -->

-	<set var="XMLTESTDIR">$(XMLBASEDIR)$(DIRSEP)bin</set>

-	

-	<set var="LIBXML_MAJOR_VERSION">2</set>

-	<set var="LIBXML_MINOR_VERSION">6</set>

-	<set var="LIBXML_MICRO_VERSION">16</set>

-	

-	<!-- some defines related to threads -->

-	<set var="THREADS_DEF">

-		<if cond="HAS_DEFINE_ARG=='1' and WITH_THREADS=='native'">

-			$(__DEFINE_ARG)_REENTRANT $(__DEFINE_ARG)HAVE_WIN32_THREADS

-		</if>

-		<if cond="HAS_DEFINE_ARG=='1' and WITH_THREADS=='ctls'">

-			$(__DEFINE_ARG)_REENTRANT $(__DEFINE_ARG)HAVE_WIN32_THREADS $(__DEFINE_ARG)HAVE_COMPILER_TLS

-		</if>

-		<if cond="HAS_DEFINE_ARG=='1' and WITH_THREADS=='posix'">

-			$(__DEFINE_ARG)_REENTRANT $(__DEFINE_ARG)HAVE_PTHREAD_H

-		</if>

-	</set>

-	<if cond="FORMAT=='borland'">

-		<set var="THREADS_DEF">

-			<if cond="WITH_THREADS=='native'">$(THREADS_DEF) $(__DEFINE_ARG)__MT__</if>

-			<if cond="WITH_THREADS=='ctls'">$(THREADS_DEF) $(__DEFINE_ARG)__MT__</if>

-			<if cond="WITH_THREADS=='posix'">$(THREADS_DEF) $(__DEFINE_ARG)__MT__</if>

-		</set>

-	</if>	

-	

-	

-	<!-- some other conditional defines -->

-	<set var="ZLIB_DEF"><if cond="WITH_ZLIB=='1'">HAVE_ZLIB_H</if></set>

-	<set var="DEBUG_DEF"><if cond="BUILD=='debug'">_DEBUG</if></set>

-	<set var="DEBUG_DEF"><if cond="BUILD=='release'">NDEBUG</if></set>

-	

-	<!-- this is very very important when compiling with MINGW: without this line,

-	the test programs (and all the programs built with libxml2 which use xmlFree)

-	won't build because of "undefined references to __xmlFree" -->

-	<set var="STATIC_DEF"><if cond="SHARED=='0'">LIBXML_STATIC</if></set>

-	

-	<!-- some conditional libraries dependencies -->

-	<set var="ICONV_LIB"><if cond="WITH_ICONV=='1'">iconv</if></set>

-	<set var="WSOCK32_LIB"><if cond="WITH_THREADS=='native'">wsock32</if></set>

-	<set var="ZLIB_LIB"><if cond="WITH_ZLIB=='1'">zdll</if></set>

-	<set var="POSIX_LIB"><if cond="WITH_THREADS=='posix'">pthreadVC</if></set>

-	

-	<set var="XMLINCLUDEDIR">$(XMLBASEDIR)$(DIRSEP)include$(DIRSEP)libxml$(DIRSEP)</set>

-

-  

-

- 

-    <!--                                                            -->

-    <!--               ABOUT CONFIG.H HEADER CREATION               -->

-    <!--                                                            -->   

-    

-    <set var="CONFIG_SRCNAME">win32config.h</set>

-    <set var="CONFIG_DSTNAME">config.h</set>

-    

-	<if cond="FORMAT!='msvc6prj' and FORMAT!='autoconf' and FORMAT!='gnu'">

-		<copy-file-to-file id="setup">

-			<!-- On win32 we need to manually copy a default config.h file -->

-			<!-- from the include/mc/msw folder to include/mc			   -->

-			<src>../include/$(CONFIG_SRCNAME)</src>

-			<dst>../$(CONFIG_DSTNAME)</dst>

-			<dependency-of>all</dependency-of>

-

-			<!-- With autoconf, we will use the configure script to translate -->

-			<!-- include/mc/config.h.in to include/mc/config.h and thus we do -->

-			<!-- not need to do anything here...							  -->

-		</copy-file-to-file>

-	</if>

-    

-	<if cond="FORMAT!='msvc6prj'">

-	    

-		<mkdir id="setuplibdir"><dir>$(XMLBASEDIR)$(DIRSEP)lib</dir></mkdir>

-		<mkdir id="setupbindir"><dir>$(XMLBASEDIR)$(DIRSEP)bin</dir></mkdir>

-			

-	    <!-- Creates all output folders -->	

-	    <phony id="setupdirs">

-			<dependency-of>all</dependency-of>	    

-	    	<depends>setuplibdir</depends>

-	    	<depends>setupbindir</depends>

-	    </phony>

-	</if>

-

-    <!-- This defines a tag which includes headers on MSVC          -->

-    <!-- Note that $(value) is stuck in there by bakefile,          -->

-    <!-- and is the value between the beginning and end tag.        -->

-    <define-tag name="headers" rules="dll,lib,exe">

-        <if cond="FORMAT=='msvc6prj'">

-            <msvc-project-files>

-                $(value)

-            </msvc-project-files>

-        </if>

-    </define-tag>

-    		

-	<!-- Creates the following custom build rule for MSVC6PRJ file:

-	     copies ..\include\win32config.h into ..\config.h

-	     NOTE: this tag must be used before the <sources> tag if you want that the configuration

-	           file will be created before any other source file is compiled... -->

-    <define-tag name="msvc-copy-setup-h" rules="dll,lib,action">

-        <if cond="FORMAT=='msvc6prj'">

-	        <headers>$(XMLBASEDIR)\include\$(CONFIG_SRCNAME)</headers>

-	        <set var="__subdir">$(value)</set>

-            <set var="_custom_build_files" append="1">$(XMLBASEDIR)\include\$(CONFIG_SRCNAME)</set>

-            <set var="_custom_build____include_win32config_h">

-Creating the configuration file ..\$(CONFIG_DSTNAME) from ..\include\$(CONFIG_SRCNAME)

-InputPath=..\include\$(CONFIG_SRCNAME)

-

-"..\$(CONFIG_DSTNAME)" : $(DOLLAR)(SOURCE) "$(DOLLAR)(INTDIR)" "$(DOLLAR)(OUTDIR)"

-$(TAB)copy "$(DOLLAR)(InputPath)" ..\$(CONFIG_DSTNAME)

-            </set>

-        </if>

-    </define-tag>

-

- 

-

-

-

-    <!--                                                            -->

-    <!--                          TEMPLATES                         -->

-    <!--                                                            -->   

-

-	<!-- The basic template: used by all the targets -->

-    <template id="base">

-        <if cond="FORMAT=='mingw'">                    

-            <define>HAVE_W32API_H</define>

-            <ldflags>-mthreads</ldflags>

-        </if>

-

-        <cxxflags>$(MYCPPFLAGS)</cxxflags>

-        <warnings>$(WARNINGS)</warnings>

-        <define>$(UNICODE_DEFINE)</define>

-        <optimize>$(OPTIMIZEFLAG)</optimize>

-        <debug-info>$(DEBUGINFO)</debug-info>

-        <debug-runtime-libs>$(DEBUGRUNTIME)</debug-runtime-libs>

-	</template>

-	

-	<!-- The template used both by the library and by the test programs -->

-    <template id="xml2" template="base">

-    

-        <!-- -I & -L equivalents -->

-        <include>$(XMLBASEDIR)$(DIRSEP)include</include>

-        <include>$(ICONV_DIR)$(DIRSEP)include</include>

-        <lib-path>$(ICONV_DIR)$(DIRSEP)lib</lib-path>    

-        

-		<!-- some conditional define flags -->

-        <cflags>$(THREADS_DEF)</cflags>

-		<define>$(ZLIB_DEF)</define>

-		<define>$(DEBUG_DEF)</define>

-		<define>$(STATIC_DEF)</define>

-	

-		<if cond="HAS_DEFINE_ARG=='0'">

-		

-			<!-- we are probably using an IDE output: defaults to WITH_THREADS=='native' -->

-			<define>_REENTRANT</define>

-			<define>HAVE_WIN32_THREADS</define>

-		</if>

-

-		

-		<!-- these must always be defined on win32 -->

-		<define>WIN32</define>		

-		<define>_WINDOWS</define>

-		<define>_MBCS</define>

-

-		<if cond="FORMAT=='borland'">

-			<define>_NO_VCL</define>

-			<define>EILSEQ=2</define>

-		</if>

-    </template>

-    

-	<!-- The template used by libxml2 test programs -->

-	<template id="xml2test" template="xml2">

-        <dirname>$(XMLTESTDIR)</dirname>

-        <app-type>console</app-type>        

-

-        <library>libxml2</library>

-		

-        <sys-lib>$(ICONV_LIB)</sys-lib>

-        <sys-lib>$(WSOCK32_LIB)</sys-lib>

-		<sys-lib>$(ZLIB_LIB)</sys-lib> 

-        <sys-lib>$(POSIX_LIB)</sys-lib>

-	</template>

-

-

-

-

- 

-

-    <!--                                                            -->

-    <!--                  LIBXML2 LIBRARY TARGET                    -->

-    <!--                                                            -->  

-    

-    <lib id="libxml2" template="xml2">

-    	

-    	<!-- this is useful only when using MSVC6PRJ -->

-    	<if cond="FORMAT=='msvc6prj'">

-    		<msvc-copy-setup-h/>

-    		<msvc-file-group>Config headers:*config.h</msvc-file-group>

-    	</if>

-    	<if cond="FORMAT!='msvc6prj'">

-	    	<depends>setup</depends>

-    		<depends>setuplibdir</depends>

-    	</if>

-    	    

-    	<!-- output folder -->

-        <dirname>$(XMLBASEDIR)$(DIRSEP)lib</dirname>

-		

-		<!-- The output name must be "libxml2.lib" with all compilers.

-		     Since mingw format autoadds the "lib" prefix to the library

-			 name, we must intercept that case to avoid to get "liblibxml2.a" -->

-		<if cond="FORMAT!='mingw'">

-	        <libname>libxml2</libname>

-		</if>

-		<if cond="FORMAT=='mingw'">

-	        <libname>xml2</libname>

-		</if>

-		        

-        <!-- the list of source files to compile -->            

-        <sources>

-			$(XMLBASEDIR)$(DIRSEP)c14n.c

-			$(XMLBASEDIR)$(DIRSEP)catalog.c

-			$(XMLBASEDIR)$(DIRSEP)chvalid.c

-			$(XMLBASEDIR)$(DIRSEP)debugXML.c

-			$(XMLBASEDIR)$(DIRSEP)dict.c

-			$(XMLBASEDIR)$(DIRSEP)DOCBparser.c

-			$(XMLBASEDIR)$(DIRSEP)encoding.c

-			$(XMLBASEDIR)$(DIRSEP)entities.c

-			$(XMLBASEDIR)$(DIRSEP)error.c

-			$(XMLBASEDIR)$(DIRSEP)globals.c

-			$(XMLBASEDIR)$(DIRSEP)hash.c

-			$(XMLBASEDIR)$(DIRSEP)HTMLparser.c

-			$(XMLBASEDIR)$(DIRSEP)HTMLtree.c

-			$(XMLBASEDIR)$(DIRSEP)legacy.c

-			$(XMLBASEDIR)$(DIRSEP)list.c

-			$(XMLBASEDIR)$(DIRSEP)nanoftp.c

-			$(XMLBASEDIR)$(DIRSEP)nanohttp.c

-			$(XMLBASEDIR)$(DIRSEP)parser.c

-			$(XMLBASEDIR)$(DIRSEP)parserInternals.c

-			$(XMLBASEDIR)$(DIRSEP)pattern.c

-			$(XMLBASEDIR)$(DIRSEP)relaxng.c

-			$(XMLBASEDIR)$(DIRSEP)SAX2.c

-			$(XMLBASEDIR)$(DIRSEP)SAX.c

-			$(XMLBASEDIR)$(DIRSEP)threads.c

-			$(XMLBASEDIR)$(DIRSEP)tree.c

-			$(XMLBASEDIR)$(DIRSEP)uri.c

-			$(XMLBASEDIR)$(DIRSEP)valid.c

-			$(XMLBASEDIR)$(DIRSEP)xinclude.c

-			$(XMLBASEDIR)$(DIRSEP)xlink.c

-			$(XMLBASEDIR)$(DIRSEP)xmlIO.c

-			$(XMLBASEDIR)$(DIRSEP)xmlmemory.c

-			$(XMLBASEDIR)$(DIRSEP)xmlreader.c

-			$(XMLBASEDIR)$(DIRSEP)xmlregexp.c

-			$(XMLBASEDIR)$(DIRSEP)xmlsave.c

-			$(XMLBASEDIR)$(DIRSEP)xmlschemas.c

-			$(XMLBASEDIR)$(DIRSEP)xmlschemastypes.c

-			$(XMLBASEDIR)$(DIRSEP)xmlunicode.c

-			$(XMLBASEDIR)$(DIRSEP)xmlwriter.c

-			$(XMLBASEDIR)$(DIRSEP)xpath.c

-			$(XMLBASEDIR)$(DIRSEP)xpointer.c

-			$(XMLBASEDIR)$(DIRSEP)xmlstring.c

-        </sources>

-        

-        <!-- the list of header files (for IDE projects) -->

-        <headers>

-			$(XMLINCLUDEDIR)c14n.h

-			$(XMLINCLUDEDIR)catalog.h

-			$(XMLINCLUDEDIR)chvalid.h

-			$(XMLINCLUDEDIR)debugXML.h

-			$(XMLINCLUDEDIR)dict.h

-			$(XMLINCLUDEDIR)DOCBparser.h

-			$(XMLINCLUDEDIR)encoding.h

-			$(XMLINCLUDEDIR)entities.h

-			$(XMLINCLUDEDIR)globals.h

-			$(XMLINCLUDEDIR)hash.h

-			$(XMLINCLUDEDIR)HTMLparser.h

-			$(XMLINCLUDEDIR)HTMLtree.h

-			$(XMLINCLUDEDIR)list.h

-			$(XMLINCLUDEDIR)nanoftp.h

-			$(XMLINCLUDEDIR)nanohttp.h

-			$(XMLINCLUDEDIR)parser.h

-			$(XMLINCLUDEDIR)parserInternals.h

-			$(XMLINCLUDEDIR)pattern.h

-			$(XMLINCLUDEDIR)relaxng.h

-			$(XMLINCLUDEDIR)SAX.h

-			$(XMLINCLUDEDIR)SAX2.h

-			$(XMLINCLUDEDIR)schemasInternals.h

-			$(XMLINCLUDEDIR)threads.h

-			$(XMLINCLUDEDIR)tree.h

-			$(XMLINCLUDEDIR)uri.h

-			$(XMLINCLUDEDIR)valid.h

-			$(XMLINCLUDEDIR)xinclude.h

-			$(XMLINCLUDEDIR)xlink.h

-			$(XMLINCLUDEDIR)xmlautomata.h

-			$(XMLINCLUDEDIR)xmlerror.h

-			$(XMLINCLUDEDIR)xmlexports.h

-			$(XMLINCLUDEDIR)xmlIO.h

-			$(XMLINCLUDEDIR)xmlmemory.h

-			$(XMLINCLUDEDIR)xmlmodule.h

-			$(XMLINCLUDEDIR)xmlreader.h

-			$(XMLINCLUDEDIR)xmlregexp.h

-			$(XMLINCLUDEDIR)xmlsave.h

-			$(XMLINCLUDEDIR)xmlschemas.h

-			$(XMLINCLUDEDIR)xmlschemastypes.h

-			$(XMLINCLUDEDIR)xmlstring.h

-			$(XMLINCLUDEDIR)xmlunicode.h

-			$(XMLINCLUDEDIR)xmlversion.h			

-			$(XMLINCLUDEDIR)xmlwriter.h

-			$(XMLINCLUDEDIR)xpath.h

-			$(XMLINCLUDEDIR)xpathInternals.h

-			$(XMLINCLUDEDIR)xpointer.h

-		</headers>

-

-		<!-- these ones are not inside the include/libxml folder -->

-		<headers>

-			$(XMLBASEDIR)$(DIRSEP)libxml.h

-			$(XMLBASEDIR)$(DIRSEP)triodef.h

-			$(XMLBASEDIR)$(DIRSEP)trionan.h

-			$(XMLBASEDIR)$(DIRSEP)include$(DIRSEP)wsockcompat.h			

-       </headers>

-    </lib>

-

-

-

-    <!--                                                -->

-    <!--               LIBXML2 test programs            -->

-    <!--                                                -->

-	

-	<set var="BUILD_ALL_TESTS">

-

-		<!-- when using full options support with MSVC6PRJ we should

-		     avoid to create all the DSP files required for the test

-			 programs: they would take a _lot_ of space !! -->

-		<if cond="FORMAT=='msvc6prj' and FULL_OPTIONS_SUPPORT=='1'">0</if>

-

-		<!-- when creating a makefile or using MSVC6PRJ with limited

-		     options support, then we can build all the tests safely -->

-		<if cond="FORMAT!='msvc6prj' or FULL_OPTIONS_SUPPORT=='0'">1</if>

-

-	</set>

-

-    <if cond="BUILD_ALL_TESTS=='1'">

-

-		<exe id="testAutomata" template="xml2test"><sources>$(XMLBASEDIR)$(DIRSEP)testAutomata.c</sources></exe>

-		<exe id="testC14N" template="xml2test"><sources>$(XMLBASEDIR)$(DIRSEP)testC14N.c</sources></exe>

-		<exe id="testHTML" template="xml2test"><sources>$(XMLBASEDIR)$(DIRSEP)testHTML.c</sources></exe>

-		<exe id="testReader" template="xml2test"><sources>$(XMLBASEDIR)$(DIRSEP)testReader.c</sources></exe>

-		<exe id="testRegexp" template="xml2test"><sources>$(XMLBASEDIR)$(DIRSEP)testRegexp.c</sources></exe>

-		<exe id="testRelax" template="xml2test"><sources>$(XMLBASEDIR)$(DIRSEP)testRelax.c</sources></exe>

-		<exe id="testSax" template="xml2test"><sources>$(XMLBASEDIR)$(DIRSEP)testSax.c</sources></exe>

-		<exe id="testSchemas" template="xml2test"><sources>$(XMLBASEDIR)$(DIRSEP)testSchemas.c</sources></exe>

-		<exe id="testURI" template="xml2test"><sources>$(XMLBASEDIR)$(DIRSEP)testURI.c</sources></exe>

-		<exe id="testXPath" template="xml2test"><sources>$(XMLBASEDIR)$(DIRSEP)testXPath.c</sources></exe>

-		<exe id="xmllint" template="xml2test"><sources>$(XMLBASEDIR)$(DIRSEP)xmllint.c</sources></exe>

-

-		<if cond="FORMAT=='autoconf'">

-			<exe id="testdso" template="xml2test"><sources>$(XMLBASEDIR)$(DIRSEP)testdso.c</sources></exe>

-		</if>

-

-	<!-- FIXME:

-		<exe id="testModule" template="xml2test"><sources>$(XMLBASEDIR)$(DIRSEP)testModule.c</sources></exe>

-

-		<if cond="WITH_THREADS=='posix'">

-			<exe id="testThreads" template="xml2test"><sources>$(XMLBASEDIR)$(DIRSEP)testThreads.c</sources></exe>

-		</if>

-		<if cond="WITH_THREADS=='ctls' or WITH_THREADS=='native'">

-			<exe id="testThreadsWin32" template="xml2test"><sources>$(XMLBASEDIR)$(DIRSEP)testThreadsWin32.c</sources></exe>

-		</if>

-	-->

-	</if>

-

-</makefile>