upgrade tkimg to 1.4.6

1 files changed, 0 insertions, 513 deletions

diff --git a/tkimg/ps/Makefile.in b/tkimg/ps/Makefile.in
deleted file mode 100644
index 041ef39..0000000
--- a/tkimg/ps/Makefile.in
+++ /dev/null
@@ -1,513 +0,0 @@
-# Makefile.in --
-#
-#	This file is a Makefile for tkimgbmp TEA Extension.  If it has the name
-#	"Makefile.in" then it is a template for a Makefile;  to generate the
-#	actual Makefile, run "./configure", which is a configuration script
-#	generated by the "autoconf" program (constructs like "@foo@" will get
-#	replaced in the actual Makefile.
-#
-# Copyright (c) 1999 Scriptics Corporation.
-# Copyright (c) 2002-2005 ActiveState Corporation.
-#
-# See the file "license.terms" for information on usage and redistribution
-# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
-#
-# RCS: @(#) $Id: Makefile.in,v 1.1.1.1 2016/01/25 21:20:47 joye Exp $
-
-#========================================================================
-# Add additional lines to handle any additional AC_SUBST cases that
-# have been added in a customized configure script.
-#========================================================================
-
-PACKAGE_TCLNAME = @PACKAGE_TCLNAME@
-
-tkimg_SRC_PATH		= @tkimg_SRC_PATH@
-tkimg_BUILD_PATH	= @tkimg_BUILD_PATH@
-tkimg_VERSION		= @tkimg_VERSION@
-
-#========================================================================
-# Nothing of the variables below this line should need to be changed.
-# Please check the TARGETS section below to make sure the make targets
-# are correct.
-#========================================================================
-
-#========================================================================
-# The names of the source files is defined in the configure script.
-# The object files are used for linking into the final library.
-# This will be used when a dist target is added to the Makefile.
-# It is not important to specify the directory, as long as it is the
-# $(srcdir) or in the generic, win or unix subdirectory.
-#========================================================================
-
-PKG_SOURCES	= @PKG_SOURCES@
-PKG_OBJECTS	= @PKG_OBJECTS@
-
-PKG_STUB_SOURCES = @PKG_STUB_SOURCES@
-PKG_STUB_OBJECTS = @PKG_STUB_OBJECTS@
-
-#========================================================================
-# PKG_TCL_SOURCES identifies Tcl runtime files that are associated with
-# this package that need to be installed, if any.
-#========================================================================
-
-PKG_TCL_SOURCES = @PKG_TCL_SOURCES@
-
-#========================================================================
-# This is a list of public header files to be installed, if any.
-#========================================================================
-
-PKG_HEADERS	= @PKG_HEADERS@
-
-#========================================================================
-# "PKG_LIB_FILE" refers to the library (dynamic or static as per
-# configuration options) composed of the named objects.
-#========================================================================
-
-PKG_LIB_FILE	= @PKG_LIB_FILE@
-PKG_STUB_LIB_FILE = @PKG_STUB_LIB_FILE@
-
-lib_BINARIES	= $(PKG_LIB_FILE)
-BINARIES	= $(lib_BINARIES)
-
-SHELL		= @SHELL@
-
-srcdir		= @srcdir@
-prefix		= @prefix@
-exec_prefix	= @exec_prefix@
-
-bindir		= @bindir@
-libdir		= @libdir@
-datarootdir	= @datarootdir@
-datadir		= @datadir@
-mandir		= @mandir@
-includedir	= @includedir@
-
-DESTDIR		=
-
-PKG_DIR		= $(PACKAGE_NAME)$(PACKAGE_VERSION)
-pkgdatadir	= $(datadir)/$(PKG_DIR)
-pkglibdir	= $(libdir)/$(PKG_DIR)
-pkgincludedir	= $(includedir)/$(PKG_DIR)
-
-top_builddir	= .
-
-INSTALL_OPTIONS =
-INSTALL		= $(SHELL) $(srcdir)/../tclconfig/install-sh -c ${INSTALL_OPTIONS}
-INSTALL_DATA_DIR = ${INSTALL} -d -m 755
-INSTALL_PROGRAM	= ${INSTALL} -m 755
-INSTALL_DATA	= ${INSTALL} -m 644
-INSTALL_SCRIPT	= ${INSTALL_PROGRAM}
-INSTALL_LIBRARY	= ${INSTALL_DATA}
-
-PACKAGE_NAME	= @PACKAGE_NAME@
-PACKAGE_VERSION	= @PACKAGE_VERSION@
-CC		= @CC@
-CFLAGS_DEFAULT	= @CFLAGS_DEFAULT@
-CFLAGS_WARNING	= @CFLAGS_WARNING@
-CLEANFILES	= @CLEANFILES@
-EXEEXT		= @EXEEXT@
-LDFLAGS_DEFAULT	= @LDFLAGS_DEFAULT@
-MAKE_LIB	= @MAKE_LIB@
-MAKE_SHARED_LIB	= @MAKE_SHARED_LIB@
-MAKE_STATIC_LIB	= @MAKE_STATIC_LIB@
-MAKE_STUB_LIB	= @MAKE_STUB_LIB@
-OBJEXT		= @OBJEXT@
-RANLIB		= @RANLIB@
-RANLIB_STUB	= @RANLIB_STUB@
-SHLIB_CFLAGS	= @SHLIB_CFLAGS@
-SHLIB_LD	= @SHLIB_LD@
-SHLIB_LD_LIBS	= @SHLIB_LD_LIBS@
-STLIB_LD	= @STLIB_LD@
-TCL_DEFS	= @TCL_DEFS@
-TCL_BIN_DIR	= @TCL_BIN_DIR@
-TCL_SRC_DIR	= @TCL_SRC_DIR@
-# This is necessary for packages that use private Tcl headers
-TCL_TOP_DIR_NATIVE	= @TCL_TOP_DIR_NATIVE@
-# Not used, but retained for reference of what libs Tcl required
-TCL_LIBS	= @TCL_LIBS@
-
-#========================================================================
-# TCLLIBPATH seeds the auto_path in Tcl's init.tcl so we can test our
-# package without installing.  The other environment variables allow us
-# to test against an uninstalled Tcl.  Add special env vars that you
-# require for testing here (like TCLX_LIBRARY).
-#========================================================================
-
-SHLIB_LD_FLAGS	= @SHLIB_LD_FLAGS@
-TK_BIN_DIR	= @TK_BIN_DIR@
-TK_SRC_DIR	= @TK_SRC_DIR@
-TK_LIBS		= @TK_LIBS@
-
-EXTRA_PATH	= $(top_builddir):$(TCL_BIN_DIR):$(TK_BIN_DIR)
-TCLSH_ENV	= TCL_LIBRARY=`@CYGPATH@ $(TCL_SRC_DIR)/library` \
-		  TK_LIBRARY=`@CYGPATH@ $(TK_SRC_DIR)/library` \
-		  @LD_LIBRARY_PATH_VAR@="$(EXTRA_PATH):$(@LD_LIBRARY_PATH_VAR@)" \
-		  PATH="$(EXTRA_PATH):$(PATH)" \
-		  TCLLIBPATH="$(top_builddir)"
-TCLSH_PROG	= @TCLSH_PROG@
-WISH_PROG	= @WISH_PROG@
-TCLSH		= $(TCLSH_ENV) $(TCLSH_PROG)
-WISH		= $(TCLSH_ENV) $(WISH_PROG)
-SHARED_BUILD	= @SHARED_BUILD@
-
-# The local includes must come first, because the TK_XINCLUDES can be
-# just a comment
-
-INCLUDES	= @PKG_INCLUDES@ \
-		  @TK_INCLUDES@ @TCL_INCLUDES@ @TK_XINCLUDES@
-
-PKG_CFLAGS	= @PKG_CFLAGS@
-
-# TCL_DEFS is not strictly need here, but if you remove it, then you
-# must make sure that configure.in checks for the necessary components
-# that your library may use.  TCL_DEFS can actually be a problem if
-# you do not compile with a similar machine setup as the Tcl core was
-# compiled with.
-#DEFS		= $(TCL_DEFS) @DEFS@ $(PKG_CFLAGS)
-DEFS		= @DEFS@ $(PKG_CFLAGS)
-
-CONFIG_CLEAN_FILES = Makefile
-
-CPPFLAGS	= @CPPFLAGS@ -DPACKAGE_TCLNAME=\"$(PACKAGE_TCLNAME)\"
-LIBS		= @PKG_LIBS@ @LIBS@
-AR		= @AR@
-CFLAGS		= @CFLAGS@
-COMPILE		= $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-
-#========================================================================
-# Start of user-definable TARGETS section
-#========================================================================
-
-PHIMGTYPE	= @PHIMGTYPE@
-
-tkimg_SRC_PATH		= @tkimg_SRC_PATH@
-tkimg_BUILD_PATH	= @tkimg_BUILD_PATH@
-tkimg_VERSION		= @tkimg_VERSION@
-
-#========================================================================
-# TEA TARGETS.  Please note that the "libraries:" target refers to platform
-# independent files, and the "binaries:" target inclues executable programs and
-# platform-dependent libraries.  Modify these targets so that they install
-# the various pieces of your package.  The make and install rules
-# for the BINARIES that you specified above have already been done.
-#========================================================================
-
-all: binaries libraries doc
-
-#========================================================================
-# The binaries target builds executable programs, Windows .dll's, unix
-# shared/static libraries, and any other platform-dependent files.
-# The list of targets to build for "binaries:" is specified at the top
-# of the Makefile, in the "BINARIES" variable.
-#========================================================================
-
-binaries: $(BINARIES) pkgIndex.tcl
-
-libraries:
-
-doc:
-
-#	Currently no documentation to create, the HTML is part of the
-#	distribution.
-#	.................................................................
-#	@echo "If you have documentation to create, place the commands to"
-#	@echo "build the docs in the 'doc:' target.  For example:"
-#	@echo "        xml2nroff sample.xml > sample.n"
-#	@echo "        xml2html sample.xml > sample.html"
-
-install: all install-binaries install-libraries install-doc
-
-install-binaries: binaries install-lib-binaries install-bin-binaries
-
-#========================================================================
-# This rule installs platform-independent files, such as header files.
-#========================================================================
-
-install-libraries: libraries
-	@$(INSTALL_DATA_DIR) $(DESTDIR)$(includedir)
-	@echo "Installing header files in $(DESTDIR)$(includedir)"
-	@list='$(PKG_HEADERS)'; for i in $$list; do \
-	    echo "Installing $(srcdir)/$$i" ; \
-	    $(INSTALL_DATA) $(srcdir)/$$i $(DESTDIR)$(includedir) ; \
-	done;
-
-#========================================================================
-# Install documentation.  Unix manpages should go in the $(mandir)
-# directory.
-#========================================================================
-
-install-doc: doc
-
-#	@$(INSTALL_DATA_DIR) $(DESTDIR)$(mandir)/mann
-#	@echo "Installing documentation in $(DESTDIR)$(mandir)"
-#	@for i in doc/*.n; do \
-#	    echo "Installing $$i"; \
-#	    rm -f $(DESTDIR)$(mandir)/mann/`basename $$i`; \
-#	    $(INSTALL_DATA) $$i $(DESTDIR)$(mandir)/mann ; \
-#	done
-
-test: binaries libraries
-	$(WISH) `@CYGPATH@ $(srcdir)/tests/all.tcl` $(TESTFLAGS)
-
-shell: binaries libraries
-	@$(TCLSH) $(SCRIPT)
-
-gdb:
-	$(TCLSH_ENV) gdb $(TCLSH_PROG) $(SCRIPT)
-
-depend:
-
-#========================================================================
-# $(PKG_LIB_FILE) should be listed as part of the BINARIES variable
-# mentioned above.  That will ensure that this target is built when you
-# run "make binaries".
-#
-# The $(PKG_OBJECTS) objects are created and linked into the final
-# library.  In most cases these object files will correspond to the
-# source files above.
-#========================================================================
-
-$(PKG_LIB_FILE): $(PKG_OBJECTS)
-	-rm -f $(PKG_LIB_FILE)
-	${MAKE_LIB}
-	$(RANLIB) $(PKG_LIB_FILE)
-
-$(PKG_STUB_LIB_FILE): $(PKG_STUB_OBJECTS)
-	-rm -f $(PKG_STUB_LIB_FILE)
-	${MAKE_STUB_LIB}
-	$(RANLIB_STUB) $(PKG_STUB_LIB_FILE)
-
-#========================================================================
-# We need to enumerate the list of .c to .o lines here.
-#
-# In the following lines, $(srcdir) refers to the toplevel directory
-# containing your extension.  If your sources are in a subdirectory,
-# you will have to modify the paths to reflect this:
-#
-# tkimgbmp.$(OBJEXT): $(srcdir)/generic/tkimgbmp.c
-# 	$(COMPILE) -c `@CYGPATH@ $(srcdir)/generic/tkimgbmp.c` -o $@
-#
-# Setting the VPATH variable to a list of paths will cause the makefile
-# to look into these paths when resolving .c to .obj dependencies.
-# As necessary, add $(srcdir):$(srcdir)/compat:....
-#========================================================================
-
-VPATH = $(srcdir):$(srcdir)/generic:$(srcdir)/unix:$(srcdir)/win
-
-.c.@OBJEXT@:
-	$(COMPILE) -c `@CYGPATH@ $<` -o $@
-
-#========================================================================
-# Create the pkgIndex.tcl file.
-# It is usually easiest to let Tcl do this for you with pkg_mkIndex, but
-# you may find that you need to customize the package.  If so, either
-# modify the -hand version, or create a pkgIndex.tcl.in file and have
-# the configure script output the pkgIndex.tcl by editing configure.in.
-#========================================================================
-
-pkgIndex.tcl:	$(PKG_LIB_FILE)
-	(echo 'package ifneeded $(PACKAGE_TCLNAME) $(PACKAGE_VERSION) \
-	    [list load [file join $$dir $(PKG_LIB_FILE)]]'\
-	) > pkgIndex.tcl
-
-#========================================================================
-# Distribution creation
-# You may need to tweak this target to make it work correctly.
-#========================================================================
-
-#COMPRESS	= tar cvf $(PKG_DIR).tar $(PKG_DIR); compress $(PKG_DIR).tar
-COMPRESS	= gtar zcvf $(PKG_DIR).tar.gz $(PKG_DIR)
-DIST_ROOT	= /tmp/dist
-DIST_DIR	= $(DIST_ROOT)/$(PKG_DIR)
-
-dist-clean:
-	rm -rf $(DIST_DIR) $(DIST_ROOT)/$(PKG_DIR).tar.*
-
-dist: dist-clean doc
-	mkdir -p $(DIST_DIR)
-	cp -p $(srcdir)/ChangeLog $(srcdir)/README* $(srcdir)/doc/license* \
-		$(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/*.in \
-		$(DIST_DIR)/
-	chmod 664 $(DIST_DIR)/Makefile.in $(DIST_DIR)/aclocal.m4
-	chmod 775 $(DIST_DIR)/configure $(DIST_DIR)/configure.in
-
-	mkdir $(DIST_DIR)/tclconfig
-	cp $(srcdir)/tclconfig/install-sh $(srcdir)/tclconfig/tcl.m4 \
-		$(DIST_DIR)/tclconfig/
-	chmod 664 $(DIST_DIR)/tclconfig/tcl.m4
-	chmod +x $(DIST_DIR)/tclconfig/install-sh
-
-	-list='htdocs/art demos generic library mac tests unix win tea.tests tools tools/rules'; \
-	for p in $$list; do \
-	    if test -d $(srcdir)/$$p ; then \
-		mkdir -p $(DIST_DIR)/$$p; \
-		cp -p $(srcdir)/$$p/*.* $(srcdir)/$$p/* $(DIST_DIR)/$$p/; \
-	    fi; \
-	done
-
-	-list='doc'; \
-	for p in $$list; do \
-	    if test -d $$p ; then \
-		mkdir -p $(DIST_DIR)/$$p; \
-		cp -p $$p/*.* $$p/* $(DIST_DIR)/$$p/; \
-	    fi; \
-	done
-	-mv $(DIST_DIR)/htdocs/art $(DIST_DIR)/doc/art
-	rm -rf $(DIST_DIR)/htdocs
-
-	(cd $(DIST_ROOT); $(COMPRESS);)
-
-dist_orig:
-	rm -rf $(PKG_DIR)*
-	ls -d $(srcdir)/* > __FILES
-	mkdir $(PKG_DIR)
-	cp -rf `cat __FILES | grep -v __FILES` $(PKG_DIR)
-	rm __FILES
-	find $(PKG_DIR) -name CVS -prune -exec rm -rf {} \;
-	cd $(PKG_DIR) ; $(TCLSH_PROG) PREPARE
-	-tar cf - $(PKG_DIR) | gzip --best > $(PKG_DIR).tar.gz
-	-tar cf - $(PKG_DIR) | bzip2 > $(PKG_DIR).tar.bz2
-	-zip -r $(PKG_DIR).zip $(PKG_DIR)
-	rm -rf $(PKG_DIR)
-
-#========================================================================
-# End of user-definable section
-#========================================================================
-
-#========================================================================
-# Don't modify the file to clean here.  Instead, set the "CLEANFILES"
-# variable in configure.in
-#========================================================================
-
-clean:
-	-test -z "$(BINARIES)" || rm -f $(BINARIES)
-	-rm -f *.$(OBJEXT) core *.core
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean: clean
-	-rm -f *.tab.c
-	-rm -f $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log config.status
-
-#========================================================================
-# Install binary object libraries.  On Windows this includes both .dll and
-# .lib files.  Because the .lib files are not explicitly listed anywhere,
-# we need to deduce their existence from the .dll file of the same name.
-# Library files go into the lib directory.
-# In addition, this will generate the pkgIndex.tcl
-# file in the install location (assuming it can find a usable tclsh shell)
-#
-# You should not have to modify this target.
-#========================================================================
-
-install-lib-binaries:
-	@$(INSTALL_DATA_DIR) $(DESTDIR)$(pkglibdir)
-	@list='$(lib_BINARIES)'; for p in $$list; do \
-	  if test -f $$p; then \
-	    echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p"; \
-	    $(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p; \
-	    stub=`echo $$p|sed -e "s/.*\(stub\).*/\1/"`; \
-	    if test "x$$stub" = "xstub"; then \
-		echo " $(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p"; \
-		$(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p; \
-	    else \
-		echo " $(RANLIB) $(DESTDIR)$(pkglibdir)/$$p"; \
-		$(RANLIB) $(DESTDIR)$(pkglibdir)/$$p; \
-	    fi; \
-	    ext=`echo $$p|sed -e "s/.*\.//"`; \
-	    if test "x$$ext" = "xdll"; then \
-		lib=`basename $$p|sed -e 's/.[^.]*$$//'`.lib; \
-		if test -f $$lib; then \
-		    echo " $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib"; \
-	            $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib; \
-		fi; \
-	    fi; \
-	  fi; \
-	done
-	@list='$(PKG_TCL_SOURCES)'; for p in $$list; do \
-	  if test -f $(srcdir)/$$p; then \
-	    destp=`basename $$p`; \
-	    echo " Install $$destp $(DESTDIR)$(pkglibdir)/$$destp"; \
-	    $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkglibdir)/$$destp; \
-	  fi; \
-	done
-	@if test "x$(SHARED_BUILD)" = "x1"; then \
-	    echo " Install pkgIndex.tcl $(DESTDIR)$(pkglibdir)"; \
-	    $(INSTALL_DATA) pkgIndex.tcl $(DESTDIR)$(pkglibdir); \
-	fi
-
-#========================================================================
-# Install binary executables (e.g. .exe files and dependent .dll files)
-# This is for files that must go in the bin directory (located next to
-# wish and tclsh), like dependent .dll files on Windows.
-#
-# You should not have to modify this target, except to define bin_BINARIES
-# above if necessary.
-#========================================================================
-
-install-bin-binaries:
-	@$(INSTALL_DATA_DIR) $(DESTDIR)$(bindir)
-	@list='$(bin_BINARIES)'; for p in $$list; do \
-	  if test -f $$p; then \
-	    echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p"; \
-	    $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p; \
-	  fi; \
-	done
-
-.SUFFIXES: .c .$(OBJEXT)
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-uninstall-binaries:
-	list='$(lib_BINARIES)'; for p in $$list; do \
-	  rm -f $(DESTDIR)$(pkglibdir)/$$p; \
-	done
-	list='$(PKG_TCL_SOURCES)'; for p in $$list; do \
-	  p=`basename $$p`; \
-	  rm -f $(DESTDIR)$(pkglibdir)/$$p; \
-	done
-	list='$(bin_BINARIES)'; for p in $$list; do \
-	  rm -f $(DESTDIR)$(bindir)/$$p; \
-	done
-
-#========================================================================
-#
-# Target to regenerate header files and stub files from the *.decls tables.
-#
-#========================================================================
-
-genstubs:
-	$(TCLSH_PROG)	\
-		$(srcdir)/tools/genStubs.tcl $(srcdir)/generic	\
-		$(srcdir)/tkimgbmp.decls
-
-#========================================================================
-#
-# Target to check that all exported functions have an entry in the stubs
-# tables.
-#
-#========================================================================
-
-tkimgbmp_DECLS = \
-	$(srcdir)/tkimgbmp.decls
-
-checkstubs:
-	-@for i in `nm -p $(tkimgbmp_LIB_FILE) | awk '$$2 ~ /T/ { print $$3 }' \
-		| sort -n`; do \
-		match=0; \
-		for j in $(tkimgbmp_DECLS); do \
-		    if [ `grep -c $$i $$j` -gt 0 ]; then \
-			match=1; \
-		    fi; \
-		done; \
-		if [ $$match -eq 0 ]; then echo $$i; fi \
-	done
-
-
-.PHONY: all binaries clean depend distclean doc install libraries test
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT: