diff options
Diffstat (limited to 'openssl/apps/makeapps.com')
-rw-r--r-- | openssl/apps/makeapps.com | 1184 |
1 files changed, 1184 insertions, 0 deletions
diff --git a/openssl/apps/makeapps.com b/openssl/apps/makeapps.com new file mode 100644 index 0000000..97dff41 --- /dev/null +++ b/openssl/apps/makeapps.com @@ -0,0 +1,1184 @@ +$! +$! MAKEAPPS.COM +$! Written By: Robert Byer +$! Vice-President +$! A-Com Computing, Inc. +$! byer@mail.all-net.net +$! +$! Changes by Richard Levitte <richard@levitte.org> +$! Zoltan Arpadffy <zoli@polarhome.com> +$! +$! This command files compiles and creates all the various different +$! "application" programs for the different types of encryption for OpenSSL. +$! The EXE's are placed in the directory [.xxx.EXE.APPS] where "xxx" denotes +$! ALPHA, IA64 or VAX, depending on your machine architecture. +$! +$! It was written so it would try to determine what "C" compiler to +$! use or you can specify which "C" compiler to use. +$! +$! Specify DEBUG or NODEBUG as P1 to compile with or without debugger +$! information. +$! +$! Specify which compiler at P2 to try to compile under. +$! +$! VAXC For VAX C. +$! DECC For DEC C. +$! GNUC For GNU C. +$! +$! If you don't specify a compiler, it will try to determine which +$! "C" compiler to use. +$! +$! P3, if defined, sets a TCP/IP library to use, through one of the following +$! keywords: +$! +$! UCX for UCX +$! SOCKETSHR for SOCKETSHR+NETLIB +$! TCPIP for TCPIP (post UCX) +$! +$! P4, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up) +$! +$! P5, if defined, sets a choice of programs to compile. +$! +$! P6, if defined, specifies the C pointer size. Ignored on VAX. +$! ("64=ARGV" gives more efficient code with HP C V7.3 or newer.) +$! Supported values are: +$! +$! "" Compile with default (/NOPOINTER_SIZE) +$! 32 Compile with /POINTER_SIZE=32 (SHORT) +$! 64 Compile with /POINTER_SIZE=64[=ARGV] (LONG[=ARGV]) +$! (Automatically select ARGV if compiler supports it.) +$! 64= Compile with /POINTER_SIZE=64 (LONG). +$! 64=ARGV Compile with /POINTER_SIZE=64=ARGV (LONG=ARGV). +$! +$! P7, if defined, specifies a directory where ZLIB files (zlib.h, +$! libz.olb) may be found. Optionally, a non-default object library +$! name may be included ("dev:[dir]libz_64.olb", for example). +$! +$! +$! Announce/identify. +$! +$ proc = f$environment( "procedure") +$ write sys$output "@@@ "+ - + f$parse( proc, , , "name")+ f$parse( proc, , , "type") +$! +$ on control_c then goto exit +$! +$! Define A TCP/IP Library That We Will Need To Link To. +$! (That Is, If We Need To Link To One.) +$! +$ TCPIP_LIB = "" +$ ZLIB_LIB = "" +$! +$! Check What Architecture We Are Using. +$! +$ IF (F$GETSYI("CPU").LT.128) +$ THEN +$! +$! The Architecture Is VAX. +$! +$ ARCH = "VAX" +$! +$! Else... +$! +$ ELSE +$! +$! The Architecture Is Alpha, IA64 or whatever comes in the future. +$! +$ ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE") +$ IF (ARCH .EQS. "") THEN ARCH = "UNK" +$! +$! End The Architecture Check. +$! +$ ENDIF +$! +$ ARCHD = ARCH +$ LIB32 = "32" +$ OPT_FILE = "" +$ POINTER_SIZE = "" +$! +$! Define what programs should be compiled +$! +$ PROGRAMS := OPENSSL +$! +$! Check To Make Sure We Have Valid Command Line Parameters. +$! +$ GOSUB CHECK_OPTIONS +$! +$! Define The CRYPTO Library. +$! +$ CRYPTO_LIB := SYS$DISK:[-.'ARCHD'.EXE.CRYPTO]SSL_LIBCRYPTO'LIB32'.OLB +$! +$! Define The SSL Library. +$! +$ SSL_LIB := SYS$DISK:[-.'ARCHD'.EXE.SSL]SSL_LIBSSL'LIB32'.OLB +$! +$! Define The OBJ and EXE Directories. +$! +$ OBJ_DIR := SYS$DISK:[-.'ARCHD'.OBJ.APPS] +$ EXE_DIR := SYS$DISK:[-.'ARCHD'.EXE.APPS] +$! +$! Specify the destination directory in any /MAP option. +$! +$ if (LINKMAP .eqs. "MAP") +$ then +$ LINKMAP = LINKMAP+ "=''EXE_DIR'" +$ endif +$! +$! Add the location prefix to the linker options file name. +$! +$ if (OPT_FILE .nes. "") +$ then +$ OPT_FILE = EXE_DIR+ OPT_FILE +$ endif +$! +$! Initialise logical names and such +$! +$ GOSUB INITIALISE +$! +$! Tell The User What Kind of Machine We Run On. +$! +$ WRITE SYS$OUTPUT "Host system architecture: ''ARCHD'" +$! +$! Check To See If The OBJ Directory Exists. +$! +$ IF (F$PARSE(OBJ_DIR).EQS."") +$ THEN +$! +$! It Dosen't Exist, So Create It. +$! +$ CREATE/DIRECTORY 'OBJ_DIR' +$! +$! End The OBJ Directory Check. +$! +$ ENDIF +$! +$! Check To See If The EXE Directory Exists. +$! +$ IF (F$PARSE(EXE_DIR).EQS."") +$ THEN +$! +$! It Dosen't Exist, So Create It. +$! +$ CREATE/DIRECTORY 'EXE_DIR' +$! +$! End The EXE Directory Check. +$! +$ ENDIF +$! +$! Check To See If We Have The Proper Libraries. +$! +$ GOSUB LIB_CHECK +$! +$! Check To See If We Have A Linker Option File. +$! +$ GOSUB CHECK_OPT_FILE +$! +$! Define The Application Files. +$! NOTE: Some might think this list ugly. However, it's made this way to +$! reflect the E_OBJ variable in Makefile as closely as possible, thereby +$! making it fairly easy to verify that the lists are the same. +$! +$ LIB_OPENSSL = "VERIFY,ASN1PARS,REQ,DGST,DH,DHPARAM,ENC,PASSWD,GENDH,ERRSTR,"+- + "CA,PKCS7,CRL2P7,CRL,"+- + "RSA,RSAUTL,DSA,DSAPARAM,EC,ECPARAM,"+- + "X509,GENRSA,GENDSA,GENPKEY,S_SERVER,S_CLIENT,SPEED,"+- + "S_TIME,APPS,S_CB,S_SOCKET,APP_RAND,VERSION,SESS_ID,"+- + "CIPHERS,NSEQ,PKCS12,PKCS8,PKEY,PKEYPARAM,PKEYUTL,"+ - + "SPKAC,SMIME,CMS,RAND,ENGINE,OCSP,PRIME,TS,SRP" +$! +$ LIB_OPENSSL = LIB_OPENSSL+ ",VMS_DECC_INIT,VMS_TERM_SOCK" +$! +$ TCPIP_PROGRAMS = ",," +$ IF COMPILER .EQS. "VAXC" THEN - + TCPIP_PROGRAMS = ",OPENSSL," +$! +$! Setup exceptional compilations +$! +$ COMPILEWITH_CC2 = ",S_SOCKET,S_SERVER,S_CLIENT," +$! +$ PHASE := LIB +$! +$ RESTART: +$! +$! Define An App Counter And Set It To "0". +$! +$ APP_COUNTER = 0 +$! +$! Top Of The App Loop. +$! +$ NEXT_APP: +$! +$! Make The Application File Name +$! +$ CURRENT_APP = F$EDIT(F$ELEMENT(APP_COUNTER,",",PROGRAMS),"TRIM") +$! +$! Create The Executable File Name. +$! +$ EXE_FILE = EXE_DIR + CURRENT_APP + ".EXE" +$! +$! Check To See If We Are At The End Of The File List. +$! +$ IF (CURRENT_APP.EQS.",") +$ THEN +$ IF (PHASE.EQS."LIB") +$ THEN +$ PHASE := APP +$ GOTO RESTART +$ ELSE +$ GOTO APP_DONE +$ ENDIF +$ ENDIF +$! +$! Increment The Counter. +$! +$ APP_COUNTER = APP_COUNTER + 1 +$! +$! Decide if we're building the object files or not. +$! +$ IF (PHASE.EQS."LIB") +$ THEN +$! +$! Define A Library File Counter And Set It To "-1". +$! -1 Means The Application File Name Is To Be Used. +$! +$ LIB_COUNTER = -1 +$! +$! Create a .OPT file for the object files +$! +$ OPEN /WRITE OBJECTS 'EXE_DIR''CURRENT_APP'.OPT +$! +$! Top Of The File Loop. +$! +$ NEXT_LIB: +$! +$! O.K, Extract The File Name From The File List. +$! +$ IF LIB_COUNTER .GE. 0 +$ THEN +$ FILE_NAME = F$EDIT(F$ELEMENT(LIB_COUNTER,",",LIB_'CURRENT_APP'),"TRIM") +$ ELSE +$ FILE_NAME = CURRENT_APP +$ ENDIF +$! +$! Check To See If We Are At The End Of The File List. +$! +$ IF (FILE_NAME.EQS.",") +$ THEN +$ CLOSE OBJECTS +$ GOTO NEXT_APP +$ ENDIF +$! +$! Increment The Counter. +$! +$ LIB_COUNTER = LIB_COUNTER + 1 +$! +$! Create The Source File Name. +$! +$ SOURCE_FILE = "SYS$DISK:[]" + FILE_NAME + ".C" +$! +$! Create The Object File Name. +$! +$ OBJECT_FILE = OBJ_DIR + FILE_NAME + ".OBJ" +$ ON WARNING THEN GOTO NEXT_LIB +$! +$! Check To See If The File We Want To Compile Actually Exists. +$! +$ IF (F$SEARCH(SOURCE_FILE).EQS."") +$ THEN +$! +$! Tell The User That The File Dosen't Exist. +$! +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT "The File ",SOURCE_FILE," Dosen't Exist." +$ WRITE SYS$OUTPUT "" +$! +$! Exit The Build. +$! +$ GOTO EXIT +$! +$! End The File Exist Check. +$! +$ ENDIF +$! +$! Tell The User What We Are Building. +$! +$ IF (PHASE.EQS."LIB") +$ THEN +$ WRITE SYS$OUTPUT "Compiling The ",FILE_NAME,".C File." +$ ELSE +$ WRITE SYS$OUTPUT "Building The ",FILE_NAME," Application Program." +$ ENDIF +$! +$! Compile The File. +$! +$ ON ERROR THEN GOTO NEXT_LIB +$ IF COMPILEWITH_CC2 - FILE_NAME .NES. COMPILEWITH_CC2 +$ THEN +$ CC2/OBJECT='OBJECT_FILE' 'SOURCE_FILE' +$ ELSE +$ CC/OBJECT='OBJECT_FILE' 'SOURCE_FILE' +$ ENDIF +$ WRITE OBJECTS OBJECT_FILE +$! +$ GOTO NEXT_LIB +$ ENDIF +$! +$! Check if this program works well without a TCPIP library +$! +$ IF TCPIP_LIB .EQS. "" .AND. TCPIP_PROGRAMS - CURRENT_APP .NES. TCPIP_PROGRAMS +$ THEN +$ WRITE SYS$OUTPUT CURRENT_APP," needs a TCP/IP library. Can't link. Skipping..." +$ GOTO NEXT_APP +$ ENDIF +$! +$! Link The Program. +$! +$ ON WARNING THEN GOTO NEXT_APP +$! +$! Don't Link With The RSAREF Routines And TCP/IP Library. +$! +$ LINK /'DEBUGGER' /'LINKMAP' /'TRACEBACK' /EXE='EXE_FILE' - + 'EXE_DIR''CURRENT_APP'.OPT /OPTIONS, - + 'SSL_LIB' /LIBRARY, - + 'CRYPTO_LIB' /LIBRARY - + 'TCPIP_LIB' - + 'ZLIB_LIB' - + ,'OPT_FILE' /OPTIONS +$! +$! Go Back And Do It Again. +$! +$ GOTO NEXT_APP +$! +$! All Done With This File. +$! +$ APP_DONE: +$ EXIT: +$! +$! All Done, Time To Clean Up And Exit. +$! +$ GOSUB CLEANUP +$ EXIT +$! +$! Check For The Link Option FIle. +$! +$ CHECK_OPT_FILE: +$! +$! Check To See If We Need To Make A VAX C Option File. +$! +$ IF (COMPILER.EQS."VAXC") +$ THEN +$! +$! Check To See If We Already Have A VAX C Linker Option File. +$! +$ IF (F$SEARCH(OPT_FILE).EQS."") +$ THEN +$! +$! We Need A VAX C Linker Option File. +$! +$ CREATE 'OPT_FILE' +$DECK +! +! Default System Options File To Link Against +! The Sharable VAX C Runtime Library. +! +SYS$SHARE:VAXCRTL.EXE/SHARE +$EOD +$! +$! End The Option File Check. +$! +$ ENDIF +$! +$! End The VAXC Check. +$! +$ ENDIF +$! +$! Check To See If We Need A GNU C Option File. +$! +$ IF (COMPILER.EQS."GNUC") +$ THEN +$! +$! Check To See If We Already Have A GNU C Linker Option File. +$! +$ IF (F$SEARCH(OPT_FILE).EQS."") +$ THEN +$! +$! We Need A GNU C Linker Option File. +$! +$ CREATE 'OPT_FILE' +$DECK +! +! Default System Options File To Link Against +! The Sharable C Runtime Library. +! +GNU_CC:[000000]GCCLIB/LIBRARY +SYS$SHARE:VAXCRTL/SHARE +$EOD +$! +$! End The Option File Check. +$! +$ ENDIF +$! +$! End The GNU C Check. +$! +$ ENDIF +$! +$! Check To See If We Need A DEC C Option File. +$! +$ IF (COMPILER.EQS."DECC") +$ THEN +$! +$! Check To See If We Already Have A DEC C Linker Option File. +$! +$ IF (F$SEARCH(OPT_FILE).EQS."") +$ THEN +$! +$! Figure Out If We Need An AXP Or A VAX Linker Option File. +$! +$ IF ARCH.EQS."VAX" +$ THEN +$! +$! We Need A DEC C Linker Option File For VAX. +$! +$ CREATE 'OPT_FILE' +$DECK +! +! Default System Options File To Link Against +! The Sharable DEC C Runtime Library. +! +SYS$SHARE:DECC$SHR.EXE/SHARE +$EOD +$! +$! Else... +$! +$ ELSE +$! +$! Create The non-VAX Linker Option File. +$! +$ CREATE 'OPT_FILE' +$DECK +! +! Default System Options File For non-VAX To Link Against +! The Sharable C Runtime Library. +! +SYS$SHARE:CMA$OPEN_LIB_SHR/SHARE +SYS$SHARE:CMA$OPEN_RTL/SHARE +$EOD +$! +$! End The DEC C Option File Check. +$! +$ ENDIF +$! +$! End The Option File Search. +$! +$ ENDIF +$! +$! End The DEC C Check. +$! +$ ENDIF +$! +$! Tell The User What Linker Option File We Are Using. +$! +$ WRITE SYS$OUTPUT "Using Linker Option File ",OPT_FILE,"." +$! +$! Time To RETURN. +$! +$ RETURN +$! +$! Check To See If We Have The Appropiate Libraries. +$! +$ LIB_CHECK: +$! +$! Look For The Library LIBCRYPTO.OLB. +$! +$ IF (F$SEARCH(CRYPTO_LIB).EQS."") +$ THEN +$! +$! Tell The User We Can't Find The LIBCRYPTO.OLB Library. +$! +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT "Can't Find The Library ",CRYPTO_LIB,"." +$ WRITE SYS$OUTPUT "We Can't Link Without It." +$ WRITE SYS$OUTPUT "" +$! +$! Since We Can't Link Without It, Exit. +$! +$ EXIT +$! +$! End The Crypto Library Check. +$! +$ ENDIF +$! +$! Look For The Library LIBSSL.OLB. +$! +$ IF (F$SEARCH(SSL_LIB).EQS."") +$ THEN +$! +$! Tell The User We Can't Find The LIBSSL.OLB Library. +$! +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT "Can't Find The Library ",SSL_LIB,"." +$ WRITE SYS$OUTPUT "Some Of The Test Programs Need To Link To It." +$ WRITE SYS$OUTPUT "" +$! +$! Since We Can't Link Without It, Exit. +$! +$ EXIT +$! +$! End The SSL Library Check. +$! +$ ENDIF +$! +$! Time To Return. +$! +$ RETURN +$! +$! Check The User's Options. +$! +$ CHECK_OPTIONS: +$! +$! Check To See If P1 Is Blank. +$! +$ IF (P1.EQS."NODEBUG") +$ THEN +$! +$! P1 Is NODEBUG, So Compile Without Debugger Information. +$! +$ DEBUGGER = "NODEBUG" +$ LINKMAP = "NOMAP" +$ TRACEBACK = "NOTRACEBACK" +$ GCC_OPTIMIZE = "OPTIMIZE" +$ CC_OPTIMIZE = "OPTIMIZE" +$ WRITE SYS$OUTPUT "No Debugger Information Will Be Produced During Compile." +$ WRITE SYS$OUTPUT "Compiling With Compiler Optimization." +$! +$! Else... +$! +$ ELSE +$! +$! Check To See If We Are To Compile With Debugger Information. +$! +$ IF (P1.EQS."DEBUG") +$ THEN +$! +$! Compile With Debugger Information. +$! +$ DEBUGGER = "DEBUG" +$ LINKMAP = "MAP" +$ TRACEBACK = "TRACEBACK" +$ GCC_OPTIMIZE = "NOOPTIMIZE" +$ CC_OPTIMIZE = "NOOPTIMIZE" +$ WRITE SYS$OUTPUT "Debugger Information Will Be Produced During Compile." +$ WRITE SYS$OUTPUT "Compiling Without Compiler Optimization." +$ ELSE +$! +$! Tell The User Entered An Invalid Option. +$! +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT "The Option ",P1," Is Invalid. The Valid Options Are:" +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT " DEBUG : Compile With The Debugger Information." +$ WRITE SYS$OUTPUT " NODEBUG : Compile Without The Debugger Information." +$ WRITE SYS$OUTPUT "" +$! +$! Time To EXIT. +$! +$ EXIT +$! +$! End The Valid Argument Check. +$! +$ ENDIF +$! +$! End The P1 Check. +$! +$ ENDIF +$! +$! Check P6 (POINTER_SIZE). +$! +$ IF (P6 .NES. "") .AND. (ARCH .NES. "VAX") +$ THEN +$! +$ IF (P6 .EQS. "32") +$ THEN +$ POINTER_SIZE = " /POINTER_SIZE=32" +$ ELSE +$ POINTER_SIZE = F$EDIT( P6, "COLLAPSE, UPCASE") +$ IF ((POINTER_SIZE .EQS. "64") .OR. - + (POINTER_SIZE .EQS. "64=") .OR. - + (POINTER_SIZE .EQS. "64=ARGV")) +$ THEN +$ ARCHD = ARCH+ "_64" +$ LIB32 = "" +$ IF (F$EXTRACT( 2, 1, POINTER_SIZE) .EQS. "=") +$ THEN +$! Explicit user choice: "64" or "64=ARGV". +$ IF (POINTER_SIZE .EQS. "64=") THEN POINTER_SIZE = "64" +$ ELSE +$ SET NOON +$ DEFINE /USER_MODE SYS$OUTPUT NL: +$ DEFINE /USER_MODE SYS$ERROR NL: +$ CC /NOLIST /NOOBJECT /POINTER_SIZE=64=ARGV NL: +$ IF ($STATUS .AND. %X0FFF0000) .EQ. %X00030000 +$ THEN +$ ! If we got here, it means DCL complained like this: +$ ! %DCL-W-NOVALU, value not allowed - remove value specification +$ ! \64=\ +$ ! +$ ! If the compiler was run, logicals defined in /USER would +$ ! have been deassigned automatically. However, when DCL +$ ! complains, they aren't, so we do it here (it might be +$ ! unnecessary, but just in case there will be another error +$ ! message further on that we don't want to miss) +$ DEASSIGN /USER_MODE SYS$ERROR +$ DEASSIGN /USER_MODE SYS$OUTPUT +$ ELSE +$ POINTER_SIZE = POINTER_SIZE + "=ARGV" +$ ENDIF +$ SET ON +$ ENDIF +$ POINTER_SIZE = " /POINTER_SIZE=''POINTER_SIZE'" +$! +$ ELSE +$! +$! Tell The User Entered An Invalid Option. +$! +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT "The Option ", P6, - + " Is Invalid. The Valid Options Are:" +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT - + " """" : Compile with default (short) pointers." +$ WRITE SYS$OUTPUT - + " 32 : Compile with 32-bit (short) pointers." +$ WRITE SYS$OUTPUT - + " 64 : Compile with 64-bit (long) pointers (auto ARGV)." +$ WRITE SYS$OUTPUT - + " 64= : Compile with 64-bit (long) pointers (no ARGV)." +$ WRITE SYS$OUTPUT - + " 64=ARGV : Compile with 64-bit (long) pointers (ARGV)." +$ WRITE SYS$OUTPUT "" +$! +$! Time To EXIT. +$! +$ EXIT +$! +$ ENDIF +$! +$ ENDIF +$! +$! End The P6 (POINTER_SIZE) Check. +$! +$ ENDIF +$! +$! Set basic C compiler /INCLUDE directories. +$! +$ CC_INCLUDES = "SYS$DISK:[-],SYS$DISK:[-.CRYPTO]" +$! +$! Check To See If P2 Is Blank. +$! +$ IF (P2.EQS."") +$ THEN +$! +$! O.K., The User Didn't Specify A Compiler, Let's Try To +$! Find Out Which One To Use. +$! +$! Check To See If We Have GNU C. +$! +$ IF (F$TRNLNM("GNU_CC").NES."") +$ THEN +$! +$! Looks Like GNUC, Set To Use GNUC. +$! +$ P2 = "GNUC" +$! +$! Else... +$! +$ ELSE +$! +$! Check To See If We Have VAXC Or DECC. +$! +$ IF (ARCH.NES."VAX").OR.(F$TRNLNM("DECC$CC_DEFAULT").NES."") +$ THEN +$! +$! Looks Like DECC, Set To Use DECC. +$! +$ P2 = "DECC" +$! +$! Else... +$! +$ ELSE +$! +$! Looks Like VAXC, Set To Use VAXC. +$! +$ P2 = "VAXC" +$! +$! End The VAXC Compiler Check. +$! +$ ENDIF +$! +$! End The DECC & VAXC Compiler Check. +$! +$ ENDIF +$! +$! End The Compiler Check. +$! +$ ENDIF +$! +$! Check To See If We Have A Option For P3. +$! +$ IF (P3.EQS."") +$ THEN +$! +$! Find out what socket library we have available +$! +$ IF F$PARSE("SOCKETSHR:") .NES. "" +$ THEN +$! +$! We have SOCKETSHR, and it is my opinion that it's the best to use. +$! +$ P3 = "SOCKETSHR" +$! +$! Tell the user +$! +$ WRITE SYS$OUTPUT "Using SOCKETSHR for TCP/IP" +$! +$! Else, let's look for something else +$! +$ ELSE +$! +$! Like UCX (the reason to do this before Multinet is that the UCX +$! emulation is easier to use...) +$! +$ IF F$TRNLNM("UCX$IPC_SHR") .NES. "" - + .OR. F$PARSE("SYS$SHARE:UCX$IPC_SHR.EXE") .NES. "" - + .OR. F$PARSE("SYS$LIBRARY:UCX$IPC.OLB") .NES. "" +$ THEN +$! +$! Last resort: a UCX or UCX-compatible library +$! +$ P3 = "UCX" +$! +$! Tell the user +$! +$ WRITE SYS$OUTPUT "Using UCX or an emulation thereof for TCP/IP" +$! +$! That was all... +$! +$ ENDIF +$ ENDIF +$ ENDIF +$! +$! Set Up Initial CC Definitions, Possibly With User Ones +$! +$ CCDEFS = "MONOLITH" +$ IF F$TYPE(USER_CCDEFS) .NES. "" THEN CCDEFS = CCDEFS + "," + USER_CCDEFS +$ CCEXTRAFLAGS = "" +$ IF F$TYPE(USER_CCFLAGS) .NES. "" THEN CCEXTRAFLAGS = USER_CCFLAGS +$ CCDISABLEWARNINGS = "" !!! "MAYLOSEDATA3" !!! "LONGLONGTYPE,LONGLONGSUFX,FOUNDCR" +$ IF F$TYPE(USER_CCDISABLEWARNINGS) .NES. "" +$ THEN +$ IF CCDISABLEWARNINGS .NES. THEN CCDISABLEWARNINGS = CCDISABLEWARNINGS + "," +$ CCDISABLEWARNINGS = CCDISABLEWARNINGS + USER_CCDISABLEWARNINGS +$ ENDIF +$! +$! Check To See If We Have A ZLIB Option. +$! +$ ZLIB = P7 +$ IF (ZLIB .NES. "") +$ THEN +$! +$! Check for expected ZLIB files. +$! +$ err = 0 +$ file1 = f$parse( "zlib.h", ZLIB, , , "SYNTAX_ONLY") +$ if (f$search( file1) .eqs. "") +$ then +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid." +$ WRITE SYS$OUTPUT " Can't find header: ''file1'" +$ err = 1 +$ endif +$ file1 = f$parse( "A.;", ZLIB)- "A.;" +$! +$ file2 = f$parse( ZLIB, "libz.olb", , , "SYNTAX_ONLY") +$ if (f$search( file2) .eqs. "") +$ then +$ if (err .eq. 0) +$ then +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid." +$ endif +$ WRITE SYS$OUTPUT " Can't find library: ''file2'" +$ WRITE SYS$OUTPUT "" +$ err = err+ 2 +$ endif +$ if (err .eq. 1) +$ then +$ WRITE SYS$OUTPUT "" +$ endif +$! +$ if (err .ne. 0) +$ then +$ EXIT +$ endif +$! +$ CCDEFS = """ZLIB=1"", "+ CCDEFS +$ CC_INCLUDES = CC_INCLUDES+ ", "+ file1 +$ ZLIB_LIB = ", ''file2' /library" +$! +$! Print info +$! +$ WRITE SYS$OUTPUT "ZLIB library spec: ", file2 +$! +$! End The ZLIB Check. +$! +$ ENDIF +$! +$! Check To See If The User Entered A Valid Parameter. +$! +$ IF (P2.EQS."VAXC").OR.(P2.EQS."DECC").OR.(P2.EQS."GNUC") +$ THEN +$! +$! Check To See If The User Wanted DECC. +$! +$ IF (P2.EQS."DECC") +$ THEN +$! +$! Looks Like DECC, Set To Use DECC. +$! +$ COMPILER = "DECC" +$! +$! Tell The User We Are Using DECC. +$! +$ WRITE SYS$OUTPUT "Using DECC 'C' Compiler." +$! +$! Use DECC... +$! +$ CC = "CC" +$ IF ARCH.EQS."VAX" .AND. F$TRNLNM("DECC$CC_DEFAULT").NES."/DECC" - + THEN CC = "CC/DECC" +$ CC = CC + " /''CC_OPTIMIZE' /''DEBUGGER' /STANDARD=RELAXED"+ - + "''POINTER_SIZE' /NOLIST /PREFIX=ALL" + - + " /INCLUDE=(''CC_INCLUDES') " + CCEXTRAFLAGS +$! +$! Define The Linker Options File Name. +$! +$ OPT_FILE = "VAX_DECC_OPTIONS.OPT" +$! +$! End DECC Check. +$! +$ ENDIF +$! +$! Check To See If We Are To Use VAXC. +$! +$ IF (P2.EQS."VAXC") +$ THEN +$! +$! Looks Like VAXC, Set To Use VAXC. +$! +$ COMPILER = "VAXC" +$! +$! Tell The User We Are Using VAX C. +$ WRITE SYS$OUTPUT "Using VAXC 'C' Compiler." +$! +$! Compile Using VAXC. +$! +$ CC = "CC" +$ IF ARCH.NES."VAX" +$ THEN +$ WRITE SYS$OUTPUT "There is no VAX C on ''ARCH'!" +$ EXIT +$ ENDIF +$ IF F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC" THEN CC = "CC/VAXC" +$ CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/NOLIST" + - + "/INCLUDE=(''CC_INCLUDES')" + CCEXTRAFLAGS +$ CCDEFS = CCDEFS + ",""VAXC""" +$! +$! Define <sys> As SYS$COMMON:[SYSLIB] +$! +$ DEFINE/NOLOG SYS SYS$COMMON:[SYSLIB] +$! +$! Define The Linker Options File Name. +$! +$ OPT_FILE = "VAX_VAXC_OPTIONS.OPT" +$! +$! End VAXC Check +$! +$ ENDIF +$! +$! Check To See If We Are To Use GNU C. +$! +$ IF (P2.EQS."GNUC") +$ THEN +$! +$! Looks Like GNUC, Set To Use GNUC. +$! +$ COMPILER = "GNUC" +$! +$! Tell The User We Are Using GNUC. +$! +$ WRITE SYS$OUTPUT "Using GNU 'C' Compiler." +$! +$! Use GNU C... +$! +$ IF F$TYPE(GCC) .EQS. "" THEN GCC := GCC +$ CC = GCC+"/NOCASE_HACK/''GCC_OPTIMIZE'/''DEBUGGER'/NOLIST" + - + "/INCLUDE=(''CC_INCLUDES')" + CCEXTRAFLAGS +$! +$! Define The Linker Options File Name. +$! +$ OPT_FILE = "VAX_GNUC_OPTIONS.OPT" +$! +$! End The GNU C Check. +$! +$ ENDIF +$! +$! Set up default defines +$! +$ CCDEFS = """FLAT_INC=1""," + CCDEFS +$! +$! Else The User Entered An Invalid Argument. +$! +$ ELSE +$! +$! Tell The User We Don't Know What They Want. +$! +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT "The Option ",P2," Is Invalid. The Valid Options Are:" +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT " VAXC : To Compile With VAX C." +$ WRITE SYS$OUTPUT " DECC : To Compile With DEC C." +$ WRITE SYS$OUTPUT " GNUC : To Compile With GNU C." +$ WRITE SYS$OUTPUT "" +$! +$! Time To EXIT. +$! +$ EXIT +$ ENDIF +$! +$! Time to check the contents, and to make sure we get the correct library. +$! +$ IF P3.EQS."SOCKETSHR" .OR. P3.EQS."MULTINET" .OR. P3.EQS."UCX" - + .OR. P3.EQS."TCPIP" .OR. P3.EQS."NONE" +$ THEN +$! +$! Check to see if SOCKETSHR was chosen +$! +$ IF P3.EQS."SOCKETSHR" +$ THEN +$! +$! Set the library to use SOCKETSHR +$! +$ TCPIP_LIB = ",SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT /OPTIONS" +$! +$! Done with SOCKETSHR +$! +$ ENDIF +$! +$! Check to see if MULTINET was chosen +$! +$ IF P3.EQS."MULTINET" +$ THEN +$! +$! Set the library to use UCX emulation. +$! +$ P3 = "UCX" +$! +$! Done with MULTINET +$! +$ ENDIF +$! +$! Check to see if UCX was chosen +$! +$ IF P3.EQS."UCX" +$ THEN +$! +$! Set the library to use UCX. +$! +$ TCPIP_LIB = ",SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT /OPTIONS" +$ IF F$TRNLNM("UCX$IPC_SHR") .NES. "" +$ THEN +$ TCPIP_LIB = ",SYS$DISK:[-.VMS]UCX_SHR_DECC_LOG.OPT /OPTIONS" +$ ELSE +$ IF COMPILER .NES. "DECC" .AND. ARCH .EQS. "VAX" THEN - + TCPIP_LIB = ",SYS$DISK:[-.VMS]UCX_SHR_VAXC.OPT /OPTIONS" +$ ENDIF +$! +$! Done with UCX +$! +$ ENDIF +$! +$! Check to see if TCPIP (post UCX) was chosen +$! +$ IF P3.EQS."TCPIP" +$ THEN +$! +$! Set the library to use TCPIP. +$! +$ TCPIP_LIB = ",SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT /OPTIONS" +$! +$! Done with TCPIP +$! +$ ENDIF +$! +$! Check to see if NONE was chosen +$! +$ IF P3.EQS."NONE" +$ THEN +$! +$! Do not use TCPIP. +$! +$ TCPIP_LIB = "" +$! +$! Done with TCPIP +$! +$ ENDIF +$! +$! Add TCP/IP type to CC definitions. +$! +$ CCDEFS = CCDEFS + ",TCPIP_TYPE_''P3'" +$! +$! Print info +$! +$ WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB- "," +$! +$! Else The User Entered An Invalid Argument. +$! +$ ELSE +$! +$! Tell The User We Don't Know What They Want. +$! +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT "The Option ",P3," Is Invalid. The Valid Options Are:" +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT " SOCKETSHR : To link with SOCKETSHR TCP/IP library." +$ WRITE SYS$OUTPUT " UCX : To link with UCX TCP/IP library." +$ WRITE SYS$OUTPUT " TCPIP : To link with TCPIP (post UCX) TCP/IP library." +$ WRITE SYS$OUTPUT "" +$! +$! Time To EXIT. +$! +$ EXIT +$! +$! Done with TCP/IP libraries +$! +$ ENDIF +$! +$! Finish up the definition of CC. +$! +$ IF COMPILER .EQS. "DECC" +$ THEN +$! Not all compiler versions support MAYLOSEDATA3. +$ OPT_TEST = "MAYLOSEDATA3" +$ DEFINE /USER_MODE SYS$ERROR NL: +$ DEFINE /USER_MODE SYS$OUTPUT NL: +$ 'CC' /NOCROSS_REFERENCE /NOLIST /NOOBJECT - + /WARNINGS = DISABLE = ('OPT_TEST', EMPTYFILE) NL: +$ IF ($SEVERITY) +$ THEN +$ IF CCDISABLEWARNINGS .NES. "" THEN - + CCDISABLEWARNINGS = CCDISABLEWARNINGS+ "," +$ CCDISABLEWARNINGS = CCDISABLEWARNINGS+ OPT_TEST +$ ENDIF +$ IF CCDISABLEWARNINGS .NES. "" +$ THEN +$ CCDISABLEWARNINGS = " /WARNING=(DISABLE=(" + CCDISABLEWARNINGS + "))" +$ ENDIF +$ ELSE +$ CCDISABLEWARNINGS = "" +$ ENDIF +$ CC2 = CC + " /DEFINE=(" + CCDEFS + ",_POSIX_C_SOURCE)" + CCDISABLEWARNINGS +$ CC = CC + " /DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS +$! +$! Show user the result +$! +$ WRITE/SYMBOL SYS$OUTPUT "Main Compiling Command: ",CC +$! +$! Special Threads For OpenVMS v7.1 Or Later +$! +$! Written By: Richard Levitte +$! richard@levitte.org +$! +$! +$! Check To See If We Have A Option For P4. +$! +$ IF (P4.EQS."") +$ THEN +$! +$! Get The Version Of VMS We Are Using. +$! +$ ISSEVEN := +$ TMP = F$ELEMENT(0,"-",F$EXTRACT(1,4,F$GETSYI("VERSION"))) +$ TMP = F$INTEGER(F$ELEMENT(0,".",TMP)+F$ELEMENT(1,".",TMP)) +$! +$! Check To See If The VMS Version Is v7.1 Or Later. +$! +$ IF (TMP.GE.71) +$ THEN +$! +$! We Have OpenVMS v7.1 Or Later, So Use The Special Threads. +$! +$ ISSEVEN := ,PTHREAD_USE_D4 +$! +$! End The VMS Version Check. +$! +$ ENDIF +$! +$! End The P4 Check. +$! +$ ENDIF +$! +$! Check if the user wanted to compile just a subset of all the programs. +$! +$ IF P5 .NES. "" +$ THEN +$ PROGRAMS = P5 +$ ENDIF +$! +$! Time To RETURN... +$! +$ RETURN +$! +$ INITIALISE: +$! +$! Save old value of the logical name OPENSSL +$! +$ __SAVE_OPENSSL = F$TRNLNM("OPENSSL","LNM$PROCESS_TABLE") +$! +$! Save directory information +$! +$ __HERE = F$PARSE(F$PARSE("A.;",F$ENVIRONMENT("PROCEDURE"))-"A.;","[]A.;") - "A.;" +$ __HERE = F$EDIT(__HERE,"UPCASE") +$ __TOP = __HERE - "APPS]" +$ __INCLUDE = __TOP + "INCLUDE.OPENSSL]" +$! +$! Set up the logical name OPENSSL to point at the include directory +$! +$ DEFINE OPENSSL /NOLOG '__INCLUDE' +$! +$! Done +$! +$ RETURN +$! +$ CLEANUP: +$! +$! Restore the saved logical name OPENSSL, if it had a value. +$! +$ if (f$type( __SAVE_OPENSSL) .nes. "") +$ then +$ IF __SAVE_OPENSSL .EQS. "" +$ THEN +$ DEASSIGN OPENSSL +$ ELSE +$ DEFINE /NOLOG OPENSSL '__SAVE_OPENSSL' +$ ENDIF +$ endif +$! +$! Close any open files. +$! +$ if (f$trnlnm( "objects", "LNM$PROCESS", 0, "SUPERVISOR") .nes. "") then - + close objects +$! +$! Done +$! +$ RETURN +$! |