diff options
Diffstat (limited to 'tcl8.6/compat/zlib/gzlib.c')
-rw-r--r-- | tcl8.6/compat/zlib/gzlib.c | 637 |
1 files changed, 0 insertions, 637 deletions
diff --git a/tcl8.6/compat/zlib/gzlib.c b/tcl8.6/compat/zlib/gzlib.c deleted file mode 100644 index 4105e6a..0000000 --- a/tcl8.6/compat/zlib/gzlib.c +++ /dev/null @@ -1,637 +0,0 @@ -/* gzlib.c -- zlib functions common to reading and writing gzip files - * Copyright (C) 2004-2017 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#include "gzguts.h" - -#if defined(_WIN32) && !defined(__BORLANDC__) && !defined(__MINGW32__) -# define LSEEK _lseeki64 -#else -#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0 -# define LSEEK lseek64 -#else -# define LSEEK lseek -#endif -#endif - -/* Local functions */ -local void gz_reset OF((gz_statep)); -local gzFile gz_open OF((const void *, int, const char *)); - -#if defined UNDER_CE - -/* Map the Windows error number in ERROR to a locale-dependent error message - string and return a pointer to it. Typically, the values for ERROR come - from GetLastError. - - The string pointed to shall not be modified by the application, but may be - overwritten by a subsequent call to gz_strwinerror - - The gz_strwinerror function does not change the current setting of - GetLastError. */ -char ZLIB_INTERNAL *gz_strwinerror (error) - DWORD error; -{ - static char buf[1024]; - - wchar_t *msgbuf; - DWORD lasterr = GetLastError(); - DWORD chars = FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM - | FORMAT_MESSAGE_ALLOCATE_BUFFER, - NULL, - error, - 0, /* Default language */ - (LPVOID)&msgbuf, - 0, - NULL); - if (chars != 0) { - /* If there is an \r\n appended, zap it. */ - if (chars >= 2 - && msgbuf[chars - 2] == '\r' && msgbuf[chars - 1] == '\n') { - chars -= 2; - msgbuf[chars] = 0; - } - - if (chars > sizeof (buf) - 1) { - chars = sizeof (buf) - 1; - msgbuf[chars] = 0; - } - - wcstombs(buf, msgbuf, chars + 1); - LocalFree(msgbuf); - } - else { - sprintf(buf, "unknown win32 error (%ld)", error); - } - - SetLastError(lasterr); - return buf; -} - -#endif /* UNDER_CE */ - -/* Reset gzip file state */ -local void gz_reset(state) - gz_statep state; -{ - state->x.have = 0; /* no output data available */ - if (state->mode == GZ_READ) { /* for reading ... */ - state->eof = 0; /* not at end of file */ - state->past = 0; /* have not read past end yet */ - state->how = LOOK; /* look for gzip header */ - } - state->seek = 0; /* no seek request pending */ - gz_error(state, Z_OK, NULL); /* clear error */ - state->x.pos = 0; /* no uncompressed data yet */ - state->strm.avail_in = 0; /* no input data yet */ -} - -/* Open a gzip file either by name or file descriptor. */ -local gzFile gz_open(path, fd, mode) - const void *path; - int fd; - const char *mode; -{ - gz_statep state; - z_size_t len; - int oflag; -#ifdef O_CLOEXEC - int cloexec = 0; -#endif -#ifdef O_EXCL - int exclusive = 0; -#endif - - /* check input */ - if (path == NULL) - return NULL; - - /* allocate gzFile structure to return */ - state = (gz_statep)malloc(sizeof(gz_state)); - if (state == NULL) - return NULL; - state->size = 0; /* no buffers allocated yet */ - state->want = GZBUFSIZE; /* requested buffer size */ - state->msg = NULL; /* no error message yet */ - - /* interpret mode */ - state->mode = GZ_NONE; - state->level = Z_DEFAULT_COMPRESSION; - state->strategy = Z_DEFAULT_STRATEGY; - state->direct = 0; - while (*mode) { - if (*mode >= '0' && *mode <= '9') - state->level = *mode - '0'; - else - switch (*mode) { - case 'r': - state->mode = GZ_READ; - break; -#ifndef NO_GZCOMPRESS - case 'w': - state->mode = GZ_WRITE; - break; - case 'a': - state->mode = GZ_APPEND; - break; -#endif - case '+': /* can't read and write at the same time */ - free(state); - return NULL; - case 'b': /* ignore -- will request binary anyway */ - break; -#ifdef O_CLOEXEC - case 'e': - cloexec = 1; - break; -#endif -#ifdef O_EXCL - case 'x': - exclusive = 1; - break; -#endif - case 'f': - state->strategy = Z_FILTERED; - break; - case 'h': - state->strategy = Z_HUFFMAN_ONLY; - break; - case 'R': - state->strategy = Z_RLE; - break; - case 'F': - state->strategy = Z_FIXED; - break; - case 'T': - state->direct = 1; - break; - default: /* could consider as an error, but just ignore */ - ; - } - mode++; - } - - /* must provide an "r", "w", or "a" */ - if (state->mode == GZ_NONE) { - free(state); - return NULL; - } - - /* can't force transparent read */ - if (state->mode == GZ_READ) { - if (state->direct) { - free(state); - return NULL; - } - state->direct = 1; /* for empty file */ - } - - /* save the path name for error messages */ -#ifdef WIDECHAR - if (fd == -2) { - len = wcstombs(NULL, path, 0); - if (len == (z_size_t)-1) - len = 0; - } - else -#endif - len = strlen((const char *)path); - state->path = (char *)malloc(len + 1); - if (state->path == NULL) { - free(state); - return NULL; - } -#ifdef WIDECHAR - if (fd == -2) - if (len) - wcstombs(state->path, path, len + 1); - else - *(state->path) = 0; - else -#endif -#if !defined(NO_snprintf) && !defined(NO_vsnprintf) - (void)snprintf(state->path, len + 1, "%s", (const char *)path); -#else - strcpy(state->path, path); -#endif - - /* compute the flags for open() */ - oflag = -#ifdef O_LARGEFILE - O_LARGEFILE | -#endif -#ifdef O_BINARY - O_BINARY | -#endif -#ifdef O_CLOEXEC - (cloexec ? O_CLOEXEC : 0) | -#endif - (state->mode == GZ_READ ? - O_RDONLY : - (O_WRONLY | O_CREAT | -#ifdef O_EXCL - (exclusive ? O_EXCL : 0) | -#endif - (state->mode == GZ_WRITE ? - O_TRUNC : - O_APPEND))); - - /* open the file with the appropriate flags (or just use fd) */ - state->fd = fd > -1 ? fd : ( -#ifdef WIDECHAR - fd == -2 ? _wopen(path, oflag, 0666) : -#endif - open((const char *)path, oflag, 0666)); - if (state->fd == -1) { - free(state->path); - free(state); - return NULL; - } - if (state->mode == GZ_APPEND) { - LSEEK(state->fd, 0, SEEK_END); /* so gzoffset() is correct */ - state->mode = GZ_WRITE; /* simplify later checks */ - } - - /* save the current position for rewinding (only if reading) */ - if (state->mode == GZ_READ) { - state->start = LSEEK(state->fd, 0, SEEK_CUR); - if (state->start == -1) state->start = 0; - } - - /* initialize stream */ - gz_reset(state); - - /* return stream */ - return (gzFile)state; -} - -/* -- see zlib.h -- */ -gzFile ZEXPORT gzopen(path, mode) - const char *path; - const char *mode; -{ - return gz_open(path, -1, mode); -} - -/* -- see zlib.h -- */ -gzFile ZEXPORT gzopen64(path, mode) - const char *path; - const char *mode; -{ - return gz_open(path, -1, mode); -} - -/* -- see zlib.h -- */ -gzFile ZEXPORT gzdopen(fd, mode) - int fd; - const char *mode; -{ - char *path; /* identifier for error messages */ - gzFile gz; - - if (fd == -1 || (path = (char *)malloc(7 + 3 * sizeof(int))) == NULL) - return NULL; -#if !defined(NO_snprintf) && !defined(NO_vsnprintf) - (void)snprintf(path, 7 + 3 * sizeof(int), "<fd:%d>", fd); -#else - sprintf(path, "<fd:%d>", fd); /* for debugging */ -#endif - gz = gz_open(path, fd, mode); - free(path); - return gz; -} - -/* -- see zlib.h -- */ -#ifdef WIDECHAR -gzFile ZEXPORT gzopen_w(path, mode) - const wchar_t *path; - const char *mode; -{ - return gz_open(path, -2, mode); -} -#endif - -/* -- see zlib.h -- */ -int ZEXPORT gzbuffer(file, size) - gzFile file; - unsigned size; -{ - gz_statep state; - - /* get internal structure and check integrity */ - if (file == NULL) - return -1; - state = (gz_statep)file; - if (state->mode != GZ_READ && state->mode != GZ_WRITE) - return -1; - - /* make sure we haven't already allocated memory */ - if (state->size != 0) - return -1; - - /* check and set requested size */ - if ((size << 1) < size) - return -1; /* need to be able to double it */ - if (size < 2) - size = 2; /* need two bytes to check magic header */ - state->want = size; - return 0; -} - -/* -- see zlib.h -- */ -int ZEXPORT gzrewind(file) - gzFile file; -{ - gz_statep state; - - /* get internal structure */ - if (file == NULL) - return -1; - state = (gz_statep)file; - - /* check that we're reading and that there's no error */ - if (state->mode != GZ_READ || - (state->err != Z_OK && state->err != Z_BUF_ERROR)) - return -1; - - /* back up and start over */ - if (LSEEK(state->fd, state->start, SEEK_SET) == -1) - return -1; - gz_reset(state); - return 0; -} - -/* -- see zlib.h -- */ -z_off64_t ZEXPORT gzseek64(file, offset, whence) - gzFile file; - z_off64_t offset; - int whence; -{ - unsigned n; - z_off64_t ret; - gz_statep state; - - /* get internal structure and check integrity */ - if (file == NULL) - return -1; - state = (gz_statep)file; - if (state->mode != GZ_READ && state->mode != GZ_WRITE) - return -1; - - /* check that there's no error */ - if (state->err != Z_OK && state->err != Z_BUF_ERROR) - return -1; - - /* can only seek from start or relative to current position */ - if (whence != SEEK_SET && whence != SEEK_CUR) - return -1; - - /* normalize offset to a SEEK_CUR specification */ - if (whence == SEEK_SET) - offset -= state->x.pos; - else if (state->seek) - offset += state->skip; - state->seek = 0; - - /* if within raw area while reading, just go there */ - if (state->mode == GZ_READ && state->how == COPY && - state->x.pos + offset >= 0) { - ret = LSEEK(state->fd, offset - state->x.have, SEEK_CUR); - if (ret == -1) - return -1; - state->x.have = 0; - state->eof = 0; - state->past = 0; - state->seek = 0; - gz_error(state, Z_OK, NULL); - state->strm.avail_in = 0; - state->x.pos += offset; - return state->x.pos; - } - - /* calculate skip amount, rewinding if needed for back seek when reading */ - if (offset < 0) { - if (state->mode != GZ_READ) /* writing -- can't go backwards */ - return -1; - offset += state->x.pos; - if (offset < 0) /* before start of file! */ - return -1; - if (gzrewind(file) == -1) /* rewind, then skip to offset */ - return -1; - } - - /* if reading, skip what's in output buffer (one less gzgetc() check) */ - if (state->mode == GZ_READ) { - n = GT_OFF(state->x.have) || (z_off64_t)state->x.have > offset ? - (unsigned)offset : state->x.have; - state->x.have -= n; - state->x.next += n; - state->x.pos += n; - offset -= n; - } - - /* request skip (if not zero) */ - if (offset) { - state->seek = 1; - state->skip = offset; - } - return state->x.pos + offset; -} - -/* -- see zlib.h -- */ -z_off_t ZEXPORT gzseek(file, offset, whence) - gzFile file; - z_off_t offset; - int whence; -{ - z_off64_t ret; - - ret = gzseek64(file, (z_off64_t)offset, whence); - return ret == (z_off_t)ret ? (z_off_t)ret : -1; -} - -/* -- see zlib.h -- */ -z_off64_t ZEXPORT gztell64(file) - gzFile file; -{ - gz_statep state; - - /* get internal structure and check integrity */ - if (file == NULL) - return -1; - state = (gz_statep)file; - if (state->mode != GZ_READ && state->mode != GZ_WRITE) - return -1; - - /* return position */ - return state->x.pos + (state->seek ? state->skip : 0); -} - -/* -- see zlib.h -- */ -z_off_t ZEXPORT gztell(file) - gzFile file; -{ - z_off64_t ret; - - ret = gztell64(file); - return ret == (z_off_t)ret ? (z_off_t)ret : -1; -} - -/* -- see zlib.h -- */ -z_off64_t ZEXPORT gzoffset64(file) - gzFile file; -{ - z_off64_t offset; - gz_statep state; - - /* get internal structure and check integrity */ - if (file == NULL) - return -1; - state = (gz_statep)file; - if (state->mode != GZ_READ && state->mode != GZ_WRITE) - return -1; - - /* compute and return effective offset in file */ - offset = LSEEK(state->fd, 0, SEEK_CUR); - if (offset == -1) - return -1; - if (state->mode == GZ_READ) /* reading */ - offset -= state->strm.avail_in; /* don't count buffered input */ - return offset; -} - -/* -- see zlib.h -- */ -z_off_t ZEXPORT gzoffset(file) - gzFile file; -{ - z_off64_t ret; - - ret = gzoffset64(file); - return ret == (z_off_t)ret ? (z_off_t)ret : -1; -} - -/* -- see zlib.h -- */ -int ZEXPORT gzeof(file) - gzFile file; -{ - gz_statep state; - - /* get internal structure and check integrity */ - if (file == NULL) - return 0; - state = (gz_statep)file; - if (state->mode != GZ_READ && state->mode != GZ_WRITE) - return 0; - - /* return end-of-file state */ - return state->mode == GZ_READ ? state->past : 0; -} - -/* -- see zlib.h -- */ -const char * ZEXPORT gzerror(file, errnum) - gzFile file; - int *errnum; -{ - gz_statep state; - - /* get internal structure and check integrity */ - if (file == NULL) - return NULL; - state = (gz_statep)file; - if (state->mode != GZ_READ && state->mode != GZ_WRITE) - return NULL; - - /* return error information */ - if (errnum != NULL) - *errnum = state->err; - return state->err == Z_MEM_ERROR ? "out of memory" : - (state->msg == NULL ? "" : state->msg); -} - -/* -- see zlib.h -- */ -void ZEXPORT gzclearerr(file) - gzFile file; -{ - gz_statep state; - - /* get internal structure and check integrity */ - if (file == NULL) - return; - state = (gz_statep)file; - if (state->mode != GZ_READ && state->mode != GZ_WRITE) - return; - - /* clear error and end-of-file */ - if (state->mode == GZ_READ) { - state->eof = 0; - state->past = 0; - } - gz_error(state, Z_OK, NULL); -} - -/* Create an error message in allocated memory and set state->err and - state->msg accordingly. Free any previous error message already there. Do - not try to free or allocate space if the error is Z_MEM_ERROR (out of - memory). Simply save the error message as a static string. If there is an - allocation failure constructing the error message, then convert the error to - out of memory. */ -void ZLIB_INTERNAL gz_error(state, err, msg) - gz_statep state; - int err; - const char *msg; -{ - /* free previously allocated message and clear */ - if (state->msg != NULL) { - if (state->err != Z_MEM_ERROR) - free(state->msg); - state->msg = NULL; - } - - /* if fatal, set state->x.have to 0 so that the gzgetc() macro fails */ - if (err != Z_OK && err != Z_BUF_ERROR) - state->x.have = 0; - - /* set error code, and if no message, then done */ - state->err = err; - if (msg == NULL) - return; - - /* for an out of memory error, return literal string when requested */ - if (err == Z_MEM_ERROR) - return; - - /* construct error message with path */ - if ((state->msg = (char *)malloc(strlen(state->path) + strlen(msg) + 3)) == - NULL) { - state->err = Z_MEM_ERROR; - return; - } -#if !defined(NO_snprintf) && !defined(NO_vsnprintf) - (void)snprintf(state->msg, strlen(state->path) + strlen(msg) + 3, - "%s%s%s", state->path, ": ", msg); -#else - strcpy(state->msg, state->path); - strcat(state->msg, ": "); - strcat(state->msg, msg); -#endif -} - -#ifndef INT_MAX -/* portably return maximum value for an int (when limits.h presumed not - available) -- we need to do this to cover cases where 2's complement not - used, since C standard permits 1's complement and sign-bit representations, - otherwise we could just use ((unsigned)-1) >> 1 */ -unsigned ZLIB_INTERNAL gz_intmax() -{ - unsigned p, q; - - p = 1; - do { - q = p; - p <<= 1; - p++; - } while (p > q); - return q >> 1; -} -#endif |