diff options
Diffstat (limited to 'tcl8.6/tests/unixInit.test')
-rw-r--r-- | tcl8.6/tests/unixInit.test | 402 |
1 files changed, 0 insertions, 402 deletions
diff --git a/tcl8.6/tests/unixInit.test b/tcl8.6/tests/unixInit.test deleted file mode 100644 index 05338ed..0000000 --- a/tcl8.6/tests/unixInit.test +++ /dev/null @@ -1,402 +0,0 @@ -# The file tests the functions in the tclUnixInit.c file. -# -# This file contains a collection of tests for one or more of the Tcl built-in -# commands. Sourcing this file into Tcl runs the tests and generates output -# for errors. No output means no errors were found. -# -# Copyright (c) 1997 by Sun Microsystems, Inc. -# Copyright (c) 1998-1999 by Scriptics Corporation. -# -# See the file "license.terms" for information on usage and redistribution of -# this file, and for a DISCLAIMER OF ALL WARRANTIES. - -package require tcltest 2.2 -namespace import ::tcltest::* -unset -nocomplain path -catch {set oldlang $env(LANG)} -set env(LANG) C - -test unixInit-1.1 {TclpInitPlatform: ignore SIGPIPE} {unix stdio} { - set x {} - # Watch out for a race condition here. If tcltest is too slow to start - # then we'll kill it before it has a chance to set up its signal handler. - set f [open "|[list [interpreter]]" w+] - puts $f "puts hi" - flush $f - gets $f - exec kill -PIPE [pid $f] - lappend x [catch {close $f}] - set f [open "|[list [interpreter]]" w+] - puts $f "puts hi" - flush $f - gets $f - exec kill [pid $f] - lappend x [catch {close $f}] - set x -} {0 1} -# This test is really a test of code in tclUnixChan.c, but the channels are -# set up as part of initialisation of the interpreter so the test seems to me -# to fit here as well as anywhere else. -test unixInit-1.2 {initialisation: standard channel type deduction} {unix stdio} { - # pipe1 is a connection to a server that reports what port it starts on, - # and delivers a constant string to the first client to connect to that - # port before exiting. - set pipe1 [open "|[list [interpreter]]" r+] - puts $pipe1 { - proc accept {channel host port} { - puts $channel {puts [chan configure stdin -peername]; exit} - close $channel - exit - } - puts [chan configure [socket -server accept -myaddr 127.0.0.1 0] -sockname] - vwait forever \ - } - # Note the backslash above; this is important to make sure that the whole - # string is read before an [exit] can happen... - flush $pipe1 - set port [lindex [gets $pipe1] 2] - set sock [socket localhost $port] - # pipe2 is a connection to a Tcl interpreter that takes its orders from - # the socket we hand it (i.e. the server we create above.) These orders - # will tell it to print out the details about the socket it is taking - # instructions from, hopefully identifying it as a socket. Which is what - # this test is all about. - set pipe2 [open "|[list [interpreter] <@$sock]" r] - set result [gets $pipe2] - # Clear any pending data; stops certain kinds of (non-important) errors - chan configure $pipe1 -blocking 0; gets $pipe1 - chan configure $pipe2 -blocking 0; gets $pipe2 - # Close the pipes and the socket. - close $pipe2 - close $pipe1 - catch {close $sock} - # Can't use normal comparison, as hostname varies due to some - # installations having a messed up /etc/hosts file. - if { - "127.0.0.1" eq [lindex $result 0] && $port == [lindex $result 2] - } then { - subst "OK" - } else { - subst "Expected: `[list 127.0.0.1 localhost $port]', Got `$result'" - } -} {OK} - -# The unixInit-2.* tests were written to test the internal routine, -# TclpInitLibraryPath. That routine no longer does the things it used to do -# so those tests are obsolete. Skip them. - -skip [concat [skip] unixInit-2.*] - -test unixInit-2.0 {TclpInitLibraryPath: setting tclDefaultEncodingDir} { - set origDir [testgetdefenc] - testsetdefenc slappy - set path [testgetdefenc] - testsetdefenc $origDir - set path -} {slappy} -test unixInit-2.1 {TclpInitLibraryPath: value of installLib, developLib} -setup { - unset -nocomplain oldlibrary - if {[info exists env(TCL_LIBRARY)]} { - set oldlibrary $env(TCL_LIBRARY) - unset env(TCL_LIBRARY) - } -} -body { - set path [getlibpath] - set installLib lib/tcl[info tclversion] - set developLib tcl[info patchlevel]/library - set prefix [file dirname [file dirname [interpreter]]] - list [string equal [lindex $path 0] $prefix/$installLib] \ - [string equal [lindex $path 4] [file dirname $prefix]/$developLib] -} -cleanup { - if {[info exists oldlibrary]} { - set env(TCL_LIBRARY) $oldlibrary - unset oldlibrary - } -} -result {1 1} -test unixInit-2.2 {TclpInitLibraryPath: TCL_LIBRARY} -setup { - unset -nocomplain oldlibrary - if {[info exists env(TCL_LIBRARY)]} { - set oldlibrary $env(TCL_LIBRARY) - } -} -body { - # ((str != NULL) && (str[0] != '\0')) - set env(TCL_LIBRARY) sparkly - lindex [getlibpath] 0 -} -cleanup { - unset -nocomplain env(TCL_LIBRARY) - if {[info exists oldlibrary]} { - set env(TCL_LIBRARY) $oldlibrary - unset oldlibrary - } -} -result "sparkly" -test unixInit-2.3 {TclpInitLibraryPath: TCL_LIBRARY wrong version} -setup { - unset -nocomplain oldlibrary - if {[info exists env(TCL_LIBRARY)]} { - set oldlibrary $env(TCL_LIBRARY) - } -} -body { - # ((pathc > 0) && (strcasecmp(installLib + 4, pathv[pathc - 1]) != 0)) - set env(TCL_LIBRARY) /a/b/tcl1.7 - lrange [getlibpath] 0 1 -} -cleanup { - unset -nocomplain env(TCL_LIBRARY) - if {[info exists oldlibrary]} { - set env(TCL_LIBRARY) $oldlibrary - unset oldlibrary - } -} -result [list /a/b/tcl1.7 /a/b/tcl[info tclversion]] -test unixInit-2.4 {TclpInitLibraryPath: TCL_LIBRARY: INTL} -setup { - if {[info exists env(TCL_LIBRARY)]} { - set oldlibrary $env(TCL_LIBRARY) - } -} -body { - # Child process translates env variable from native encoding. - set env(TCL_LIBRARY) "\xa7" - lindex [getlibpath] 0 -} -cleanup { - unset -nocomplain env(TCL_LIBRARY) env(LANG) - if {[info exists oldlibrary]} { - set env(TCL_LIBRARY) $oldlibrary - unset oldlibrary - } -} -result "\xa7" -test unixInit-2.5 {TclpInitLibraryPath: compiled-in library path} { - # cannot test -} {} -test unixInit-2.6 {TclpInitLibraryPath: executable relative} -setup { - unset -nocomplain oldlibrary - if {[info exists env(TCL_LIBRARY)]} { - set oldlibrary $env(TCL_LIBRARY) - } - set env(TCL_LIBRARY) [info library] - makeDirectory tmp - makeDirectory [file join tmp sparkly] - makeDirectory [file join tmp sparkly bin] - file copy [interpreter] [file join [temporaryDirectory] tmp sparkly \ - bin tcltest] - makeDirectory [file join tmp sparkly lib] - makeDirectory [file join tmp sparkly lib tcl[info tclversion]] - makeFile {} [file join tmp sparkly lib tcl[info tclversion] init.tcl] -} -body { - lrange [getlibpath [file join [temporaryDirectory] tmp sparkly \ - bin tcltest]] 1 2 -} -cleanup { - removeFile [file join tmp sparkly lib tcl[info tclversion] init.tcl] - removeDirectory [file join tmp sparkly lib tcl[info tclversion]] - removeDirectory [file join tmp sparkly lib] - removeDirectory [file join tmp sparkly bin] - removeDirectory [file join tmp sparkly] - removeDirectory tmp - unset env(TCL_LIBRARY) - if {[info exists oldlibrary]} { - set env(TCL_LIBRARY) $oldlibrary - unset oldlibrary - } -} -result [list [temporaryDirectory]/tmp/sparkly/lib/tcl[info tclversion] [temporaryDirectory]/tmp/lib/tcl[info tclversion]] -test unixInit-2.7 {TclpInitLibraryPath: compiled-in library path} { - # would need test command to get defaultLibDir and compare it to - # [lindex $auto_path end] -} {} -# -# The following two tests write to the directory /tmp/sparkly instead of to -# [temporaryDirectory]. This is because the failures tested by these tests -# need paths near the "root" of the file system to present themselves. -# -test unixInit-2.8 {TclpInitLibraryPath: all absolute pathtype} -setup { - unset -nocomplain oldlibrary - if {[info exists env(TCL_LIBRARY)]} { - set oldlibrary $env(TCL_LIBRARY) - } - set env(TCL_LIBRARY) [info library] - # Checking for Bug 219416 - # When a program that embeds the Tcl library, like tcltest, is installed - # near the "root" of the file system, there was a problem constructing - # directories relative to the executable. When a relative ".." went past - # the root, relative path names were created rather than absolute - # pathnames. In some cases, accessing past the root caused memory access - # violations too. - # - # The bug is now fixed, but here we check for it by making sure that the - # directories constructed relative to the executable are all absolute - # pathnames, even when the executable is installed near the root of the - # filesystem. - # - # The only directory near the root we are likely to have write access to - # is /tmp. - file delete -force /tmp/sparkly - file delete -force /tmp/lib/tcl[info tclversion] - file mkdir /tmp/sparkly - file copy [interpreter] /tmp/sparkly/tcltest - # Keep any existing /tmp/lib directory - set deletelib 1 - if {[file exists /tmp/lib]} { - if {[file isdirectory /tmp/lib]} { - set deletelib 0 - } else { - file delete -force /tmp/lib - } - } - # For a successful Tcl_Init, we need a [source]-able init.tcl in - # ../lib/tcl$version relative to the executable. - file mkdir /tmp/lib/tcl[info tclversion] - close [open /tmp/lib/tcl[info tclversion]/init.tcl w] -} -body { - # Check that all directories in the library path are absolute pathnames - set allAbsolute 1 - foreach dir [getlibpath /tmp/sparkly/tcltest] { - set allAbsolute [expr {$allAbsolute \ - && [string equal absolute [file pathtype $dir]]}] - } - set allAbsolute -} -cleanup { - # Clean up temporary installation - file delete -force /tmp/sparkly - file delete -force /tmp/lib/tcl[info tclversion] - if {$deletelib} {file delete -force /tmp/lib} - unset env(TCL_LIBRARY) - if {[info exists oldlibrary]} { - set env(TCL_LIBRARY) $oldlibrary - unset oldlibrary - } -} -result 1 -test unixInit-2.9 {TclpInitLibraryPath: paths relative to executable} -setup { - # Checking for Bug 438014 - unset -nocomplain oldlibrary - if {[info exists env(TCL_LIBRARY)]} { - set oldlibrary $env(TCL_LIBRARY) - } - set env(TCL_LIBRARY) [info library] - file delete -force /tmp/sparkly - file delete -force /tmp/library - file mkdir /tmp/sparkly - file copy [interpreter] /tmp/sparkly/tcltest - file mkdir /tmp/library/ - close [open /tmp/library/init.tcl w] -} -body { - lrange [getlibpath /tmp/sparkly/tcltest] 1 5 -} -cleanup { - file delete -force /tmp/sparkly - file delete -force /tmp/library - unset env(TCL_LIBRARY) - if {[info exists oldlibrary]} { - set env(TCL_LIBRARY) $oldlibrary - unset oldlibrary - } -} -result [list /tmp/lib/tcl[info tclversion] /lib/tcl[info tclversion] \ - /tmp/library /library /tcl[info patchlevel]/library] -test unixInit-2.10 {TclpInitLibraryPath: executable relative} -setup { - unset -nocomplain oldlibrary - if {[info exists env(TCL_LIBRARY)]} { - set oldlibrary $env(TCL_LIBRARY) - } - set env(TCL_LIBRARY) [info library] - set tmpDir [makeDirectory tmp] - set sparklyDir [makeDirectory sparkly $tmpDir] - set execPath [file join [makeDirectory bin $sparklyDir] tcltest] - file copy [interpreter] $execPath - set libDir [makeDirectory lib $sparklyDir] - set scriptDir [makeDirectory tcl[info tclversion] $libDir] - makeFile {} init.tcl $scriptDir - set saveDir [pwd] - cd $libDir -} -body { - # Checking for Bug 832657 - set x [lrange [getlibpath [file join .. bin tcltest]] 3 4] - foreach p $x { - lappend y [file normalize $p] - } - set y -} -cleanup { - cd $saveDir - removeFile init.tcl $scriptDir - removeDirectory tcl[info tclversion] $libDir - file delete $execPath - removeDirectory bin $sparklyDir - removeDirectory lib $sparklyDir - removeDirectory sparkly $tmpDir - removeDirectory tmp - unset -nocomplain saveDir scriptDir libDir execPath sparklyDir tmpDir - unset -nocomplain x p y env(TCL_LIBRARY) - if {[info exists oldlibrary]} { - set env(TCL_LIBRARY) $oldlibrary - unset oldlibrary - } -} -result [list [file join [temporaryDirectory] tmp sparkly library] \ - [file join [temporaryDirectory] tmp library] ] - -test unixInit-3.1 {TclpSetInitialEncodings} -constraints { - unix stdio -} -body { - set env(LANG) C - set f [open "|[list [interpreter]]" w+] - chan configure $f -buffering none - puts $f {puts [encoding system]; exit} - set enc [gets $f] - close $f - return $enc -} -cleanup { - unset -nocomplain env(LANG) -} -match regexp -result [expr { - ($tcl_platform(os) eq "Darwin") ? "^utf-8$" : "^iso8859-15?$"}] -test unixInit-3.2 {TclpSetInitialEncodings} -setup { - catch {set oldlc_all $env(LC_ALL)} -} -constraints {unix stdio} -body { - set env(LANG) japanese - set env(LC_ALL) japanese - set f [open "|[list [interpreter]]" w+] - chan configure $f -buffering none - puts $f {puts [encoding system]; exit} - set enc [gets $f] - close $f - set validEncodings [list euc-jp] - if {[string match HP-UX $tcl_platform(os)]} { - # Some older HP-UX systems need us to accept this as valid Bug 453883 - # reports that newer HP-UX systems report euc-jp like everybody else. - lappend validEncodings shiftjis - } - expr {$enc ni $validEncodings} -} -cleanup { - unset -nocomplain env(LANG) env(LC_ALL) - catch {set env(LC_ALL) $oldlc_all} -} -result 0 - -test unixInit-4.1 {TclpSetVariables} {unix} { - # just make sure they exist - set a [list $tcl_library $tcl_pkgPath $tcl_platform(os)] - set a [list $tcl_platform(osVersion) $tcl_platform(machine)] - set tcl_platform(platform) -} "unix" - -test unixInit-5.1 {Tcl_Init} {emptyTest unix} { - # test initScript -} {} - -test unixInit-6.1 {Tcl_SourceRCFile} {emptyTest unix} { -} {} - -test unixInit-7.1 {closed standard channel: Bug 772288} -constraints { - unix stdio -} -body { - set tclsh [interpreter] - set crash [makeFile {puts [open /dev/null]} crash.tcl] - set crashtest [makeFile " - close stdin - [list exec $tclsh $crash] - " crashtest.tcl] - exec $tclsh $crashtest -} -cleanup { - removeFile crash.tcl - removeFile crashtest.tcl -} -returnCodes 0 - -# cleanup -unset -nocomplain env(LANG) -catch {set env(LANG) $oldlang} -unset -nocomplain path -::tcltest::cleanupTests -return - -# Local Variables: -# mode: tcl -# fill-column: 78 -# End: |