diff options
Diffstat (limited to 'tclxml/win/makefile.vc')
| -rw-r--r-- | tclxml/win/makefile.vc | 564 |
1 files changed, 564 insertions, 0 deletions
diff --git a/tclxml/win/makefile.vc b/tclxml/win/makefile.vc new file mode 100644 index 0000000..ae15eb8 --- /dev/null +++ b/tclxml/win/makefile.vc @@ -0,0 +1,564 @@ +# makefile.vc -- -*- Makefile -*- +# +# Microsoft Visual C++ makefile for use with nmake.exe v1.62+ (VC++ 5.0+) +# +# This makefile is based upon the Tcl 8.4 Makefile.vc and modified to +# make it suitable as a general package makefile. Look for the word EDIT +# which marks sections that may need modification. As a minumum you will +# need to change the PROJECT, DOTVERSION and DLLOBJS variables to values +# relevant to your package. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# Copyright (c) 1995-1996 Sun Microsystems, Inc. +# Copyright (c) 1998-2000 Ajuba Solutions. +# Copyright (c) 2001 ActiveState Corporation. +# Copyright (c) 2001-2002 David Gravereaux. +# Copyright (c) 2003 Pat Thoyts +# Copyright (c) 2004 Zveno Pty Ltd +# +#------------------------------------------------------------------------- +# RCS: @(#)$Id: makefile.vc,v 1.1.1.1 2009/01/16 22:11:49 joye Exp $ +#------------------------------------------------------------------------- + +!if "$(MSVCDIR)" == "" +MSG = ^ +You will need to run vcvars32.bat from Developer Studio, first, to setup^ +the environment. Jump to this line to read the new instructions. +!error $(MSG) +!endif + +#------------------------------------------------------------------------------ +# HOW TO USE this makefile: +# +# 1) It is now necessary to have %MSVCDir% set in the environment. This is +# used as a check to see if vcvars32.bat had been run prior to running +# nmake or during the installation of Microsoft Visual C++, MSVCDir had +# been set globally and the PATH adjusted. Either way is valid. +# +# You'll need to run vcvars32.bat contained in the MsDev's vc(98)/bin +# directory to setup the proper environment, if needed, for your current +# setup. This is a needed bootstrap requirement and allows the swapping of +# different environments to be easier. +# +# 2) To use the Platform SDK (not expressly needed), run setenv.bat after +# vcvars32.bat according to the instructions for it. This can also turn on +# the 64-bit compiler, if your SDK has it. +# +# 3) Targets are: +# all -- Builds everything. +# <project> -- Builds the project (eg: nmake sample) +# test -- Builds and runs the test suite. +# install -- Installs the built binaries and libraries to $(INSTALLDIR) +# in an appropriate subdirectory. +# clean/realclean/distclean -- varying levels of cleaning. +# +# 4) Macros usable on the commandline: +# INSTALLDIR=<path> +# Sets where to install Tcl from the built binaries. +# C:\Progra~1\Tcl is assumed when not specified. +# +# OPTS=static,msvcrt,staticpkg,threads,symbols,profile,loimpact,none +# Sets special options for the core. The default is for none. +# Any combination of the above may be used (comma separated). +# 'none' will over-ride everything to nothing. +# +# static = Builds a static library of the core instead of a +# dll. The shell will be static (and large), as well. +# msvcrt = Effects the static option only to switch it from +# using libcmt(d) as the C runtime [by default] to +# msvcrt(d). This is useful for static embedding +# support. +# staticpkg = Effects the static option only to switch +# tclshXX.exe to have the dde and reg extension linked +# inside it. +# threads = Turns on full multithreading support. +# thrdalloc = Use the thread allocator (shared global free pool). +# symbols = Adds symbols for step debugging. +# profile = Adds profiling hooks. Map file is assumed. +# loimpact = Adds a flag for how NT treats the heap to keep memory +# in use, low. This is said to impact alloc performance. +# +# STATS=memdbg,compdbg,none +# Sets optional memory and bytecode compiler debugging code added +# to the core. The default is for none. Any combination of the +# above may be used (comma separated). 'none' will over-ride +# everything to nothing. +# +# memdbg = Enables the debugging memory allocator. +# compdbg = Enables byte compilation logging. +# +# MACHINE=(IX86|IA64|ALPHA) +# Set the machine type used for the compiler, linker, and +# resource compiler. This hook is needed to tell the tools +# when alternate platforms are requested. IX86 is the default +# when not specified. +# +# TMP_DIR=<path> +# OUT_DIR=<path> +# Hooks to allow the intermediate and output directories to be +# changed. $(OUT_DIR) is assumed to be +# $(BINROOT)\(Release|Debug) based on if symbols are requested. +# $(TMP_DIR) will de $(OUT_DIR)\<buildtype> by default. +# +# TESTPAT=<file> +# Reads the tests requested to be run from this file. +# +# CFG_ENCODING=encoding +# name of encoding for configuration information. Defaults +# to cp1252 +# +# 5) Examples: +# +# Basic syntax of calling nmake looks like this: +# nmake [-nologo] -f makefile.vc [target|macrodef [target|macrodef] [...]] +# +# Standard (no frills) +# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat +# Setting environment for using Microsoft Visual C++ tools. +# c:\tcl_src\win\>nmake -f makefile.vc all +# c:\tcl_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl +# +# Building for Win64 +# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat +# Setting environment for using Microsoft Visual C++ tools. +# c:\tcl_src\win\>c:\progra~1\platfo~1\setenv.bat /pre64 /RETAIL +# Targeting Windows pre64 RETAIL +# c:\tcl_src\win\>nmake -f makefile.vc MACHINE=IA64 +# +#------------------------------------------------------------------------------ +#============================================================================== +############################################################################### +#------------------------------------------------------------------------------ + +!if !exist("makefile.vc") +MSG = ^ +You must run this makefile only from the directory it is in.^ +Please `cd` to its location first. +!error $(MSG) +!endif + +#------------------------------------------------------------------------- +# Project specific information (EDIT) +# +# You should edit this with the name and version of your project. This +# information is used to generate the name of the package library and +# it's install location. +# +# For example, the sample extension is going to build sample04.dll and +# would install it into $(INSTALLDIR)\lib\sample04 +# +# You need to specify the object files that need to be linked into your +# binary here. +# +#------------------------------------------------------------------------- + +PROJECT = Tclxml +!include "rules.vc" + +DOTVERSION = 3.1 +VERSION = $(DOTVERSION:.=) +STUBPREFIX = $(PROJECT)stub + +#-- Use this line for VC++ 6.0 +#WSOCKLIB = "C:\Program Files\Microsoft Visual Studio\VC98\Lib\WSOCK32.LIB" +#-- Use this line for VC++ .NET 2003 +WSOCKLIB = "C:\Program Files\Microsoft Visual Studio .NET 2003\Vc7\PlatformSDK\Lib\WSOCK32.LIB" + +DLLOBJS = \ + $(TMP_DIR)\tclxml.obj +PRJSTUBOBJS = \ + $(TMP_DIR)\tclxmlStubInit.obj \ + $(TMP_DIR)\tclxmlStubLib.obj +EXPATDLLOBJS = \ + $(TMP_DIR)\tclexpat.obj \ + $(TMP_DIR)\xmltok.obj \ + $(TMP_DIR)\xmlrole.obj \ + $(TMP_DIR)\xmlwf.obj \ + $(TMP_DIR)\xmlfile.obj \ + $(TMP_DIR)\codepage.obj \ + $(TMP_DIR)\hashtable.obj \ + $(TMP_DIR)\win32filemap.obj \ + $(TMP_DIR)\xmlparse.obj +LIBXML2DLLOBJS = \ + $(TMP_DIR)\tcllibxml2.obj \ + $(TMP_DIR)\docObj.obj +LIBXML2STUBOBJS = \ + $(TMP_DIR)\tcllibxml2StubInit.obj + +#------------------------------------------------------------------------- +# Target names and paths ( shouldn't need changing ) +#------------------------------------------------------------------------- + +BINROOT = . +ROOT = .. + +PRJIMPLIB = $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib +PRJLIBNAME = $(PROJECT)$(VERSION)$(SUFX).$(EXT) +PRJLIB = $(OUT_DIR)\$(PRJLIBNAME) + +PRJSTUBLIBNAME = $(STUBPREFIX)$(VERSION).lib +PRJSTUBLIB = $(OUT_DIR)\$(PRJSTUBLIBNAME) + +EXPATIMPLIB = $(OUT_DIR)\expat$(VERSION)$(SUFX).lib +EXPATLIBNAME = expat$(VERSION)$(SUFX).$(EXT) +EXPATLIB = $(OUT_DIR)\$(EXPATLIBNAME) + +EXPATSTUBLIBNAME = expatstub$(VERSION).lib +EXPATSTUBLIB = $(OUT_DIR)\$(EXPATSTUBLIBNAME) + +LIBXML2IMPLIB = $(OUT_DIR)\tcllibxml2$(VERSION)$(SUFX).lib +LIBXML2LIBNAME = tcllibxml2$(VERSION)$(SUFX).$(EXT) +LIBXML2LIB = $(OUT_DIR)\$(LIBXML2LIBNAME) + +LIBXML2STUBLIBNAME = tcllibxml2stub$(VERSION).lib +LIBXML2STUBLIB = $(OUT_DIR)\$(LIBXML2STUBLIBNAME) + +### Make sure we use backslash only. +LIB_INSTALL_DIR = $(_INSTALLDIR)\lib +BIN_INSTALL_DIR = $(_INSTALLDIR)\bin +DOC_INSTALL_DIR = $(_INSTALLDIR)\doc +SCRIPT_INSTALL_DIR = $(_INSTALLDIR)\lib\$(PROJECT)$(DOTVERSION) +EXPAT_INSTALL_DIR = $(_INSTALLDIR)\lib\Tclexpat$(DOTVERSION) +LIBXML2_INSTALL_DIR = $(_INSTALLDIR)\lib\Tcllibxml$(DOTVERSION) +INCLUDE_INSTALL_DIR = $(_INSTALLDIR)\include + +### The following paths CANNOT have spaces in them. +GENERICDIR = $(ROOT) +EXPATDIR = $(ROOT)\expat +TCLLIBXML2DIR = $(ROOT)\libxml2 +WINDIR = $(ROOT)\win +LIBDIR = $(ROOT)\library +DOCDIR = $(ROOT)\doc +TOOLSDIR = $(ROOT)\tools +COMPATDIR = $(ROOT)\compat +INCLUDEDIR = $(ROOT)\include + +### Find a tclsh for testing and installation. +!if !exist("$(TCLSH)") +TCLSH = $(BIN_INSTALL_DIR)\tclsh$(TCL_VERSION).exe +!endif + +#--------------------------------------------------------------------- +# Compile flags +#--------------------------------------------------------------------- + +!if !$(DEBUG) +!if $(OPTIMIZING) +### This cranks the optimization level to maximize speed +cdebug = -O2 -Op -Gs +!else +cdebug = +!endif +!else if "$(MACHINE)" == "IA64" +### Warnings are too many, can't support warnings into errors. +cdebug = -Z7 -Od +!else +cdebug = -Z7 -WX -Od +!endif + +### Declarations common to all compiler options +cflags = -nologo -c -W3 -YX -Fp$(TMP_DIR)^\ + +!if $(PENT_0F_ERRATA) +cflags = $(cflags) -QI0f +!endif + +!if $(ITAN_B_ERRATA) +cflags = $(cflags) -QIA64_Bx +!endif + +!if $(MSVCRT) +!if $(DEBUG) +crt = -MDd +!else +crt = -MD +!endif +!else +!if $(DEBUG) +crt = -MTd +!else +crt = -MT +!endif +!endif + +#---------------------------------------------------------- +# TclXML/libxml2 needs libz, libiconv and libxml2 headers +#---------------------------------------------------------- + +!if !defined(LIBZDIR) +MSG=^ +Don't know where libz is. Set the LIBZDIR macro. +!error $(MSG) +!else +_LIBZDIR = $(LIBZDIR:/=\) +!if !exist("$(_LIBZDIR)\include\zlib.h") +MSG=^ +Don't know where zlib.h is. The LIBZDIR macro doesn't appear to be correct. +!error $(MSG) +!endif +!endif + +!if !defined(LIBICONVDIR) +MSG=^ +Don't know where libiconv is. Set the LIBICONVDIR macro. +!error $(MSG) +!else +_LIBICONVDIR = $(LIBICONVDIR:/=\) +!if !exist("$(_LIBICONVDIR)\include\iconv.h") +MSG=^ +Don't know where iconv.h is. The LIBICONVDIR macro doesn't appear to be correct. +!error $(MSG) +!endif +!endif + +!if !defined(LIBXML2DIR) +MSG=^ +Don't know where libxml2 is. Set the LIBXML2DIR macro. +!error $(MSG) +!else +_LIBXML2DIR = $(LIBXML2DIR:/=\) +!if !exist("$(_LIBXML2DIR)\include\libxml\tree.h") +MSG=^ +Don't know where libxml2 tree.h is. The LIBXML2DIR macro doesn't appear to be correct. +!error $(MSG) +!endif +!endif + +TCL_INCLUDES = -I"$(TCLDIR)\include" -I"$(WINDIR)" -I"$(GENERICDIR)" +EXPAT_INCLUDES = -I"$(EXPATDIR)\xmlparse" -I"$(EXPATDIR)\xmltok" +LIBXML2_INCLUDES = -I"$(LIBZDIR)\include" -I"$(LIBICONVDIR)\include" -I"$(LIBXML2DIR)\include" +BASE_CLFAGS = $(cflags) $(cdebug) $(crt) $(TCL_INCLUDES) -I"..\include" +CON_CFLAGS = $(cflags) $(cdebug) $(crt) -DCONSOLE +TCL_CFLAGS = -DUSE_TCL_STUBS -DVERSION="\"$(DOTVERSION)\"" $(BASE_CLFAGS) $(OPTDEFINES) +LIBXML2_CFLAGS = -DTCLXML_LIBXML2_VERSION="\"$(DOTVERSION)\"" + +#--------------------------------------------------------------------- +# Link flags +#--------------------------------------------------------------------- + +!if $(DEBUG) +ldebug = -debug:full -debugtype:cv +!else +ldebug = -release -opt:ref -opt:icf,3 +!endif + +### Declarations common to all linker options +lflags = -nologo -machine:$(MACHINE) $(ldebug) + +!if $(PROFILE) +lflags = $(lflags) -profile +!endif + +!if $(ALIGN98_HACK) && !$(STATIC_BUILD) +### Align sections for PE size savings. +lflags = $(lflags) -opt:nowin98 +!else if !$(ALIGN98_HACK) && $(STATIC_BUILD) +### Align sections for speed in loading by choosing the virtual page size. +lflags = $(lflags) -align:4096 +!endif + +!if $(LOIMPACT) +lflags = $(lflags) -ws:aggressive +!endif + +dlllflags = $(lflags) -dll +conlflags = $(lflags) -subsystem:console +guilflags = $(lflags) -subsystem:windows +baselibs = $(TCLSTUBLIB) + +#--------------------------------------------------------------------- +# TclTest flags +#--------------------------------------------------------------------- + +!IF "$(TESTPAT)" != "" +TESTFLAGS = -file $(TESTPAT) +!ENDIF + +#--------------------------------------------------------------------- +# Project specific targets (EDIT) +#--------------------------------------------------------------------- + +all: setup $(PROJECT) +$(PROJECT): setup $(PRJLIB) $(EXPATLIB) $(LIBXML2LIB) +install: install-binaries install-includes install-libraries install-docs + + +test: setup $(PROJECT) + set TCL_LIBRARY=$(ROOT)/library +!if "$(OS)" == "Windows_NT" || "$(MSVCDIR)" == "IDE" + $(TCLSH) "$(ROOT)/tests/all.tcl" $(TESTFLAGS) +!else + @echo Please wait while the tests are collected... + $(TCLSH) "$(ROOT)/tests/all.tcl" $(TESTFLAGS) > tests.log + type tests.log | more +!endif + +setup: + @if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR) + @if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR) + +$(PRJLIB): $(DLLOBJS) $(PRJSTUBOBJS) + $(link32) $(dlllflags) -out:$@ $(baselibs) $(DLLOBJS) $(PRJSTUBOBJS) + -@del $*.exp + +$(EXPATLIB): $(EXPATDLLOBJS) + $(link32) $(dlllflags) -out:$@ $(baselibs) $(PRJIMPLIB) @<< +$** +<< + -@del $*.exp + +$(LIBXML2LIB): $(LIBXML2DLLOBJS) + $(link32) $(dlllflags) -out:$@ $(baselibs) $(PRJIMPLIB) $(LIBZDIR)\lib\zlib.lib $(LIBICONVDIR)\lib\iconv.lib $(LIBXML2DIR)\lib\libxml2.lib $(WSOCKLIB) @<< +$** +<< + -@del $*.exp + +$(PRJSTUBLIB): $(PRJSTUBOBJS) + $(lib32) -nologo -out:$@ $(PRJSTUBOBJS) +$(EXPATSTUBLIB): $(EXPATSTUBOBJS) + $(lib32) -nologo -out:$@ $(EXPATSTUBOBJS) +$(LIBXML2STUBLIB): $(LIBXML2STUBOBJS) + $(lib32) -nologo -out:$@ $(LIBXML2STUBOBJS) + +#--------------------------------------------------------------------- +# Special case object file targets +#--------------------------------------------------------------------- + +$(TMP_DIR)\tclxml.obj: $(GENERICDIR)\tclxml.c + $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$@ $? + +$(TMP_DIR)\tclexpat.obj: $(GENERICDIR)\tclexpat.c + $(cc32) $(TCL_CFLAGS) $(EXPAT_INCLUDES) -DBUILD_$(PROJECT) -Fo$@ $? + +$(TMP_DIR)\xmltok.obj: $(EXPATDIR)\xmltok\xmltok.c + $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$@ $? + +$(TMP_DIR)\xmlrole.obj: $(EXPATDIR)\xmltok\xmlrole.c + $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$@ $? + +$(TMP_DIR)\xmlwf.obj: $(EXPATDIR)\xmlwf\xmlwf.c + $(cc32) $(TCL_CFLAGS) $(EXPAT_INCLUDES) -DBUILD_$(PROJECT) -Fo$@ $? + +$(TMP_DIR)\xmlfile.obj: $(EXPATDIR)\xmlwf\xmlfile.c + $(cc32) $(TCL_CFLAGS) $(EXPAT_INCLUDES) -DBUILD_$(PROJECT) -Fo$@ $? + +$(TMP_DIR)\codepage.obj: $(EXPATDIR)\xmlwf\codepage.c + $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$@ $? + +$(TMP_DIR)\hashtable.obj: $(EXPATDIR)\xmlparse\hashtable.c + $(cc32) $(TCL_CFLAGS) $(EXPAT_INCLUDES) -DBUILD_$(PROJECT) -Fo$@ $? + +$(TMP_DIR)\win32filemap.obj: $(EXPATDIR)\xmlwf\win32filemap.c + $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$@ $? + +$(TMP_DIR)\xmlparse.obj: $(EXPATDIR)\xmlparse\xmlparse.c + $(cc32) $(TCL_CFLAGS) $(EXPAT_INCLUDES) -DBUILD_$(PROJECT) -Fo$@ $? + +$(TMP_DIR)\tcllibxml2.obj: $(TCLLIBXML2DIR)\tcllibxml2.c + $(cc32) $(TCL_CFLAGS) $(LIBXML2_CFLAGS) $(LIBXML2_INCLUDES) -DBUILD_TclXML_libxml2 -Fo$@ $? + +$(TMP_DIR)\docObj.obj: $(TCLLIBXML2DIR)\docObj.c + $(cc32) $(TCL_CFLAGS) $(LIBXML2_CFLAGS) $(LIBXML2_INCLUDES) -DBUILD_TclXML_libxml2 -Fo$@ $? + +$(TMP_DIR)\tcllibxml2StubInit.obj: $(TCLLIBXML2DIR)\tcllibxml2StubInit.c + $(cc32) $(TCL_CFLAGS) $(LIBXML2_CFLAGS) $(LIBXML2_INCLUDES) -DBUILD_TclXML_libxml2 -Fo$@ $? + +#--------------------------------------------------------------------- +# Implicit rules +#--------------------------------------------------------------------- + +{$(WINDIR)}.c{$(TMP_DIR)}.obj:: + $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<< +$< +<< + +{$(GENERICDIR)}.c{$(TMP_DIR)}.obj:: + $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<< +$< +<< + +{$(COMPATDIR)}.c{$(TMP_DIR)}.obj:: + $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<< +$< +<< + +{$(WINDIR)}.rc{$(TMP_DIR)}.res: + $(rc32) -fo $@ -r -i "$(GENERICDIR)" -D__WIN32__ \ +!if $(DEBUG) + -d DEBUG \ +!endif +!if $(TCL_THREADS) + -d TCL_THREADS \ +!endif +!if $(STATIC_BUILD) + -d STATIC_BUILD \ +!endif + $< + +.SUFFIXES: +.SUFFIXES:.c .rc + +#--------------------------------------------------------------------- +# Installation. (EDIT) +# +# You may need to modify this section to reflect the final distribution +# of your files and possibly to generate documentation. +# +#--------------------------------------------------------------------- + +install-binaries: install-tclxml-binaries install-expat-binaries install-libxml2-binaries + @echo Installing to '$(SCRIPT_INSTALL_DIR)' + +install-tclxml-binaries: + @if not exist $(SCRIPT_INSTALL_DIR)\nul mkdir $(SCRIPT_INSTALL_DIR) + $(CPY) $(PRJLIB) $(SCRIPT_INSTALL_DIR) + $(CPY) $(PRJIMPLIB) $(SCRIPT_INSTALL_DIR) + +install-expat-binaries: + @if not exist $(EXPAT_INSTALL_DIR)\nul mkdir $(EXPAT_INSTALL_DIR) + $(CPY) $(EXPATLIB) $(EXPAT_INSTALL_DIR) + $(CPY) $(EXPATIMPLIB) $(EXPAT_INSTALL_DIR) + @echo package ifneeded xml::expat $(DOTVERSION) [list load [file join $$dir $(EXPATLIBNAME)]] > $(EXPAT_INSTALL_DIR)\pkgIndex.tcl + +install-libxml2-binaries: + @if not exist $(LIBXML2_INSTALL_DIR)\nul mkdir $(LIBXML2_INSTALL_DIR) + $(CPY) $(LIBXML2LIB) $(LIBXML2_INSTALL_DIR) + $(CPY) $(LIBXML2IMPLIB) $(LIBXML2_INSTALL_DIR) + @echo package ifneeded xml::libxml2 $(DOTVERSION) [list load [file join $$dir $(LIBXML2LIBNAME)] Tclxml_libxml2] > $(LIBXML2_INSTALL_DIR)\pkgIndex.tcl + +install-includes: install-tclxml-includes install-expat-includes install-libxml2-includes + @echo Installing to '$(INCLUDE_INSTALL_DIR)' + @if not exist $(INCLUDE_INSTALL_DIR)\nul mkdir $(INCLUDE_INSTALL_DIR) + +install-tclxml-includes: + @if not exist $(INCLUDE_INSTALL_DIR)\tclxml\nul mkdir $(INCLUDE_INSTALL_DIR)\tclxml + $(CPY) $(INCLUDEDIR)\tclxml\*.h $(INCLUDE_INSTALL_DIR)\tclxml + +install-expat-includes: + +install-libxml2-includes: + @if not exist $(INCLUDE_INSTALL_DIR)\tclxml-libxml2\nul mkdir $(INCLUDE_INSTALL_DIR)\tclxml-libxml2 + $(CPY) $(INCLUDEDIR)\tclxml-libxml2\*.h $(INCLUDE_INSTALL_DIR)\tclxml-libxml2 + +install-libraries: + @echo Installing to '$(SCRIPT_INSTALL_DIR)' + @if exist $(LIBDIR)\nul $(CPY) $(LIBDIR)\*.tcl $(SCRIPT_INSTALL_DIR) + $(TCLSH) $(WINDIR)\mkPkgIndex.tcl $(LIBDIR)\pkgIndex.tcl.in $(SCRIPT_INSTALL_DIR)\pkgIndex.tcl VERSION=$(DOTVERSION) Tclxml_LIB_FILE=$(PRJLIBNAME) + +install-docs: + +#--------------------------------------------------------------------- +# Clean up +#--------------------------------------------------------------------- + +clean: + @if exist $(TMP_DIR)\nul $(RMDIR) $(TMP_DIR) + +realclean: clean + @if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR) + +distclean: realclean + @if exist $(WINDIR)\nmakehlp.exe del $(WINDIR)\nmakehlp.exe + @if exist $(WINDIR)\nmakehlp.obj del $(WINDIR)\nmakehlp.obj |