diff options
Diffstat (limited to 'xpa/tcl.m4')
-rw-r--r-- | xpa/tcl.m4 | 2464 |
1 files changed, 0 insertions, 2464 deletions
diff --git a/xpa/tcl.m4 b/xpa/tcl.m4 deleted file mode 100644 index 8125361..0000000 --- a/xpa/tcl.m4 +++ /dev/null @@ -1,2464 +0,0 @@ -#------------------------------------------------------------------------ -# SC_PATH_TCLCONFIG -- -# -# Locate the tclConfig.sh file and perform a sanity check on -# the Tcl compile flags -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --with-tcl=... -# -# Defines the following vars: -# TCL_BIN_DIR Full path to the directory containing -# the tclConfig.sh file -#------------------------------------------------------------------------ - -AC_DEFUN(SC_PATH_TCLCONFIG, [ - # - # Ok, lets find the tcl configuration - # First, look for one uninstalled. - # the alternative search directory is invoked by --with-tcl - # - - if test x"${no_tcl}" = x ; then - # we reset no_tcl in case something fails here - no_tcl=true - AC_ARG_WITH(tcl, [ --with-tcl directory containing tcl configuration (tclConfig.sh)], with_tclconfig=${withval}) - AC_MSG_CHECKING([for Tcl configuration]) - if test x"${withval}" != xno ; then - AC_CACHE_VAL(ac_cv_c_tclconfig,[ - - # First check to see if --with-tcl was specified. - if test x"${with_tclconfig}" != x ; then - if test -f "${with_tclconfig}/tclConfig.sh" ; then - ac_cv_c_tclconfig=`(cd ${with_tclconfig}; pwd)` - else - AC_MSG_RESULT([${with_tclconfig} directory doesn't contain tclConfig.sh]) - fi - fi - - # then check for a private Tcl installation - if test x"${ac_cv_c_tclconfig}" = x ; then - for i in \ - ../tcl \ - `ls -dr ../tcl[[8-9]].[[0-9]]* 2>/dev/null` \ - ../../tcl \ - `ls -dr ../../tcl[[8-9]].[[0-9]]* 2>/dev/null` \ - ../../../tcl \ - `ls -dr ../../../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do - if test -f "$i/unix/tclConfig.sh" ; then - ac_cv_c_tclconfig=`(cd $i/unix; pwd)` - break - fi - done - fi - - # check in a few common install locations - if test x"${ac_cv_c_tclconfig}" = x ; then - for i in `ls -d ${libdir} 2>/dev/null` \ - `ls -d /usr/local/lib 2>/dev/null` \ - `ls -d /usr/contrib/lib 2>/dev/null` \ - `ls -d /usr/lib 2>/dev/null` \ - ; do - if test -f "$i/tclConfig.sh" ; then - ac_cv_c_tclconfig=`(cd $i; pwd)` - break - fi - done - fi - - # check in a few other private locations - if test x"${ac_cv_c_tclconfig}" = x ; then - for i in \ - ${srcdir}/../tcl \ - `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do - if test -f "$i/unix/tclConfig.sh" ; then - ac_cv_c_tclconfig=`(cd $i/unix; pwd)` - break - fi - done - fi - ]) - else - AC_MSG_RESULT(skipping Tcl configuration) - ac_cv_c_tclconfig="none" - fi - - if test x"${ac_cv_c_tclconfig}" = x ; then - TCL_BIN_DIR="# no Tcl configs found" - AC_MSG_RESULT(can't find Tcl configuration definitions) -# no Tcl is OK egm 03/25/03 -# AC_MSG_WARN(Can't find Tcl configuration definitions) -# exit 0 - elif test x"${ac_cv_c_tclconfig}" = xnone ; then - TCL_BIN_DIR="" - else - no_tcl= - TCL_BIN_DIR=${ac_cv_c_tclconfig} - AC_MSG_RESULT(found $TCL_BIN_DIR/tclConfig.sh) - fi - fi -]) - -#------------------------------------------------------------------------ -# SC_PATH_TKCONFIG -- -# -# Locate the tkConfig.sh file -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --with-tk=... -# -# Defines the following vars: -# TK_BIN_DIR Full path to the directory containing -# the tkConfig.sh file -#------------------------------------------------------------------------ - -AC_DEFUN(SC_PATH_TKCONFIG, [ - # - # Ok, lets find the tk configuration - # First, look for one uninstalled. - # the alternative search directory is invoked by --with-tk - # - - if test x"${no_tk}" = x ; then - # we reset no_tk in case something fails here - no_tk=true - AC_ARG_WITH(tk, [ --with-tk directory containing tk configuration (tkConfig.sh)], with_tkconfig=${withval}) - AC_MSG_CHECKING([for Tk configuration]) - AC_CACHE_VAL(ac_cv_c_tkconfig,[ - - # First check to see if --with-tkconfig was specified. - if test x"${with_tkconfig}" != x ; then - if test -f "${with_tkconfig}/tkConfig.sh" ; then - ac_cv_c_tkconfig=`(cd ${with_tkconfig}; pwd)` - else - AC_MSG_RESULT([${with_tkconfig} directory doesn't contain tkConfig.sh]) - fi - fi - - # then check for a private Tk library - if test x"${ac_cv_c_tkconfig}" = x ; then - for i in \ - ../tk \ - `ls -dr ../tk[[8-9]].[[0-9]]* 2>/dev/null` \ - ../../tk \ - `ls -dr ../../tk[[8-9]].[[0-9]]* 2>/dev/null` \ - ../../../tk \ - `ls -dr ../../../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do - if test -f "$i/unix/tkConfig.sh" ; then - ac_cv_c_tkconfig=`(cd $i/unix; pwd)` - break - fi - done - fi - # check in a few common install locations - if test x"${ac_cv_c_tkconfig}" = x ; then - for i in `ls -d ${libdir} 2>/dev/null` \ - `ls -d /usr/local/lib 2>/dev/null` \ - `ls -d /usr/contrib/lib 2>/dev/null` \ - `ls -d /usr/lib 2>/dev/null` \ - ; do - if test -f "$i/tkConfig.sh" ; then - ac_cv_c_tkconfig=`(cd $i; pwd)` - break - fi - done - fi - # check in a few other private locations - if test x"${ac_cv_c_tkconfig}" = x ; then - for i in \ - ${srcdir}/../tk \ - `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do - if test -f "$i/unix/tkConfig.sh" ; then - ac_cv_c_tkconfig=`(cd $i/unix; pwd)` - break - fi - done - fi - ]) - if test x"${ac_cv_c_tkconfig}" = x ; then - TK_BIN_DIR="# no Tk configs found" - AC_MSG_RESULT(can't find Tk configuration definitions) -# no Tk is OK egm 03/25/03 -# AC_MSG_WARN(Can't find Tk configuration definitions) -# exit 0 - else - no_tk= - TK_BIN_DIR=${ac_cv_c_tkconfig} - AC_MSG_RESULT(found $TK_BIN_DIR/tkConfig.sh) - fi - fi - -]) - -#------------------------------------------------------------------------ -# SC_LOAD_TCLCONFIG -- -# -# Load the tclConfig.sh file -# -# Arguments: -# -# Requires the following vars to be set: -# TCL_BIN_DIR -# -# Results: -# -# Subst the following vars: -# TCL_BIN_DIR -# TCL_SRC_DIR -# TCL_LIB_FILE -# -#------------------------------------------------------------------------ - -AC_DEFUN(SC_LOAD_TCLCONFIG, [ - AC_MSG_CHECKING([for existence of $TCL_BIN_DIR/tclConfig.sh]) - - if test -f "$TCL_BIN_DIR/tclConfig.sh" ; then - AC_MSG_RESULT([loading]) - . $TCL_BIN_DIR/tclConfig.sh - else - AC_MSG_RESULT([file not found]) - fi - - # - # If the TCL_BIN_DIR is the build directory (not the install directory), - # then set the common variable name to the value of the build variables. - # For example, the variable TCL_LIB_SPEC will be set to the value - # of TCL_BUILD_LIB_SPEC. An extension should make use of TCL_LIB_SPEC - # instead of TCL_BUILD_LIB_SPEC since it will work with both an - # installed and uninstalled version of Tcl. - # - - if test -f $TCL_BIN_DIR/Makefile ; then - TCL_LIB_SPEC=${TCL_BUILD_LIB_SPEC} - TCL_STUB_LIB_SPEC=${TCL_BUILD_STUB_LIB_SPEC} - TCL_STUB_LIB_PATH=${TCL_BUILD_STUB_LIB_PATH} - fi - - # - # eval is required to do the TCL_DBGX substitution - # - - eval "TCL_LIB_FILE=\"${TCL_LIB_FILE}\"" - eval "TCL_LIB_FLAG=\"${TCL_LIB_FLAG}\"" - eval "TCL_LIB_SPEC=\"${TCL_LIB_SPEC}\"" - - eval "TCL_STUB_LIB_FILE=\"${TCL_STUB_LIB_FILE}\"" - eval "TCL_STUB_LIB_FLAG=\"${TCL_STUB_LIB_FLAG}\"" - eval "TCL_STUB_LIB_SPEC=\"${TCL_STUB_LIB_SPEC}\"" - - AC_SUBST(TCL_VERSION) - AC_SUBST(TCL_BIN_DIR) - AC_SUBST(TCL_SRC_DIR) - - AC_SUBST(TCL_LIB_FILE) - AC_SUBST(TCL_LIB_FLAG) - AC_SUBST(TCL_LIB_SPEC) - - AC_SUBST(TCL_STUB_LIB_FILE) - AC_SUBST(TCL_STUB_LIB_FLAG) - AC_SUBST(TCL_STUB_LIB_SPEC) -]) - -#------------------------------------------------------------------------ -# SC_LOAD_TKCONFIG -- -# -# Load the tkConfig.sh file -# -# Arguments: -# -# Requires the following vars to be set: -# TK_BIN_DIR -# -# Results: -# -# Sets the following vars that should be in tkConfig.sh: -# TK_BIN_DIR -#------------------------------------------------------------------------ - -AC_DEFUN(SC_LOAD_TKCONFIG, [ - AC_MSG_CHECKING([for existence of $TK_BIN_DIR/tkConfig.sh]) - - if test -f "$TK_BIN_DIR/tkConfig.sh" ; then - AC_MSG_RESULT([loading]) - . $TK_BIN_DIR/tkConfig.sh - else - AC_MSG_RESULT([could not find $TK_BIN_DIR/tkConfig.sh]) - fi - - AC_SUBST(TK_VERSION) - AC_SUBST(TK_BIN_DIR) - AC_SUBST(TK_SRC_DIR) - AC_SUBST(TK_LIB_FILE) -]) - -#------------------------------------------------------------------------ -# SC_ENABLE_SHARED -- -# -# Allows the building of shared libraries -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --enable-shared=yes|no -# -# Defines the following vars: -# STATIC_BUILD Used for building import/export libraries -# on Windows. -# -# Sets the following vars: -# SHARED_BUILD Value of 1 or 0 -#------------------------------------------------------------------------ - -AC_DEFUN(SC_ENABLE_SHARED, [ - AC_MSG_CHECKING([how to build libraries]) - AC_ARG_ENABLE(shared, - [ --enable-shared build and link with shared libraries [--enable-shared]], - [tcl_ok=$enableval], [tcl_ok=yes]) - - if test "${enable_shared+set}" = set; then - enableval="$enable_shared" - tcl_ok=$enableval - else - tcl_ok=yes - fi - - if test "$tcl_ok" = "yes" ; then - AC_MSG_RESULT([shared]) - SHARED_BUILD=1 - else - AC_MSG_RESULT([static]) - SHARED_BUILD=0 - AC_DEFINE(STATIC_BUILD) - fi -]) - -#------------------------------------------------------------------------ -# SC_ENABLE_FRAMEWORK -- -# -# Allows the building of shared libraries into frameworks -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --enable-framework=yes|no -# -# Sets the following vars: -# FRAMEWORK_BUILD Value of 1 or 0 -#------------------------------------------------------------------------ - -AC_DEFUN(SC_ENABLE_FRAMEWORK, [ - AC_MSG_CHECKING([how to package libraries]) - AC_ARG_ENABLE(framework, - [ --enable-framework package shared libraries in frameworks [--disable-framework]], - [tcl_ok=$enableval], [tcl_ok=no]) - - if test "${enable_framework+set}" = set; then - enableval="$enable_framework" - tcl_ok=$enableval - else - tcl_ok=no - fi - - if test "$tcl_ok" = "yes" ; then - AC_MSG_RESULT([framework]) - FRAMEWORK_BUILD=1 - if test "${SHARED_BUILD}" = "0" ; then - AC_MSG_WARN("Frameworks can only be built if --enable-shared is yes") - FRAMEWORK_BUILD=0 - fi - else - AC_MSG_RESULT([standard shared library]) - FRAMEWORK_BUILD=0 - fi -]) - -#------------------------------------------------------------------------ -# SC_ENABLE_THREADS -- -# -# Specify if thread support should be enabled -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --enable-threads -# -# Sets the following vars: -# THREADS_LIBS Thread library(s) -# -# Defines the following vars: -# TCL_THREADS -# _REENTRANT -# _THREAD_SAFE -# -#------------------------------------------------------------------------ - -AC_DEFUN(SC_ENABLE_THREADS, [ - AC_MSG_CHECKING(for building with threads) - AC_ARG_ENABLE(threads, [ --enable-threads build with threads], - [tcl_ok=$enableval], [tcl_ok=no]) - - if test "$tcl_ok" = "yes"; then - AC_MSG_RESULT(yes) - TCL_THREADS=1 - AC_DEFINE(TCL_THREADS) - # USE_THREAD_ALLOC tells us to try the special thread-based - # allocator that significantly reduces lock contention - AC_DEFINE(USE_THREAD_ALLOC) - AC_DEFINE(_REENTRANT) - AC_DEFINE(_THREAD_SAFE) - AC_CHECK_LIB(pthread,pthread_mutex_init,tcl_ok=yes,tcl_ok=no) - if test "$tcl_ok" = "no"; then - # Check a little harder for __pthread_mutex_init in the same - # library, as some systems hide it there until pthread.h is - # defined. We could alternatively do an AC_TRY_COMPILE with - # pthread.h, but that will work with libpthread really doesn't - # exist, like AIX 4.2. [Bug: 4359] - AC_CHECK_LIB(pthread,__pthread_mutex_init,tcl_ok=yes,tcl_ok=no) - fi - - if test "$tcl_ok" = "yes"; then - # The space is needed - THREADS_LIBS=" -lpthread" - else - AC_CHECK_LIB(pthreads,pthread_mutex_init,tcl_ok=yes,tcl_ok=no) - if test "$tcl_ok" = "yes"; then - # The space is needed - THREADS_LIBS=" -lpthreads" - else - AC_CHECK_LIB(c,pthread_mutex_init,tcl_ok=yes,tcl_ok=no) - if test "$tcl_ok" = "no"; then - AC_CHECK_LIB(c_r,pthread_mutex_init,tcl_ok=yes,tcl_ok=no) - if test "$tcl_ok" = "yes"; then - # The space is needed - THREADS_LIBS=" -pthread" - else - TCL_THREADS=0 - AC_MSG_WARN("Don t know how to find pthread lib on your system - you must disable thread support or edit the LIBS in the Makefile...") - fi - fi - fi - fi - - # Does the pthread-implementation provide - # 'pthread_attr_setstacksize' ? - - ac_saved_libs=$LIBS - LIBS="$LIBS $THREADS_LIBS" - AC_CHECK_FUNCS(pthread_attr_setstacksize) - LIBS=$ac_saved_libs - AC_CHECK_FUNCS(readdir_r) - else - TCL_THREADS=0 - AC_MSG_RESULT([no (default)]) - fi - AC_SUBST(TCL_THREADS) -]) - -#------------------------------------------------------------------------ -# SC_ENABLE_SYMBOLS -- -# -# Specify if debugging symbols should be used. -# Memory (TCL_MEM_DEBUG) and compile (TCL_COMPILE_DEBUG) debugging -# can also be enabled. -# -# Arguments: -# none -# -# Requires the following vars to be set in the Makefile: -# CFLAGS_DEBUG -# CFLAGS_OPTIMIZE -# LDFLAGS_DEBUG -# LDFLAGS_OPTIMIZE -# -# Results: -# -# Adds the following arguments to configure: -# --enable-symbols -# -# Defines the following vars: -# CFLAGS_DEFAULT Sets to $(CFLAGS_DEBUG) if true -# Sets to $(CFLAGS_OPTIMIZE) if false -# LDFLAGS_DEFAULT Sets to $(LDFLAGS_DEBUG) if true -# Sets to $(LDFLAGS_OPTIMIZE) if false -# DBGX Debug library extension -# -#------------------------------------------------------------------------ - -AC_DEFUN(SC_ENABLE_SYMBOLS, [ - AC_MSG_CHECKING([for build with symbols]) - AC_ARG_ENABLE(symbols, [ --enable-symbols build with debugging symbols [--disable-symbols]], [tcl_ok=$enableval], [tcl_ok=no]) -# FIXME: Currently, LDFLAGS_DEFAULT is not used, it should work like CFLAGS_DEFAULT. - if test "$tcl_ok" = "no"; then - CFLAGS_DEFAULT='$(CFLAGS_OPTIMIZE)' - LDFLAGS_DEFAULT='$(LDFLAGS_OPTIMIZE)' - DBGX="" - AC_MSG_RESULT([no]) - else - CFLAGS_DEFAULT='$(CFLAGS_DEBUG)' - LDFLAGS_DEFAULT='$(LDFLAGS_DEBUG)' - DBGX=g - if test "$tcl_ok" = "yes"; then - AC_MSG_RESULT([yes (standard debugging)]) - fi - fi - AC_SUBST(CFLAGS_DEFAULT) - AC_SUBST(LDFLAGS_DEFAULT) - - if test "$tcl_ok" = "mem" -o "$tcl_ok" = "all"; then - AC_DEFINE(TCL_MEM_DEBUG) - fi - - if test "$tcl_ok" = "compile" -o "$tcl_ok" = "all"; then - AC_DEFINE(TCL_COMPILE_DEBUG) - AC_DEFINE(TCL_COMPILE_STATS) - fi - - if test "$tcl_ok" != "yes" -a "$tcl_ok" != "no"; then - if test "$tcl_ok" = "all"; then - AC_MSG_RESULT([enabled symbols mem compile debugging]) - else - AC_MSG_RESULT([enabled $tcl_ok debugging]) - fi - fi -]) - -#------------------------------------------------------------------------ -# SC_ENABLE_LANGINFO -- -# -# Allows use of modern nl_langinfo check for better l10n. -# This is only relevant for Unix. -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --enable-langinfo=yes|no (default is yes) -# -# Defines the following vars: -# HAVE_LANGINFO Triggers use of nl_langinfo if defined. -# -#------------------------------------------------------------------------ - -AC_DEFUN(SC_ENABLE_LANGINFO, [ - AC_ARG_ENABLE(langinfo, - [ --enable-langinfo use nl_langinfo if possible to determine - encoding at startup, otherwise use old heuristic], - [langinfo_ok=$enableval], [langinfo_ok=yes]) - - HAVE_LANGINFO=0 - if test "$langinfo_ok" = "yes"; then - if test "$langinfo_ok" = "yes"; then - AC_CHECK_HEADER(langinfo.h,[langinfo_ok=yes],[langinfo_ok=no]) - fi - fi - AC_MSG_CHECKING([whether to use nl_langinfo]) - if test "$langinfo_ok" = "yes"; then - AC_TRY_COMPILE([#include <langinfo.h>], - [nl_langinfo(CODESET);],[langinfo_ok=yes],[langinfo_ok=no]) - if test "$langinfo_ok" = "no"; then - langinfo_ok="no (could not compile with nl_langinfo)"; - fi - if test "$langinfo_ok" = "yes"; then - AC_DEFINE(HAVE_LANGINFO) - fi - fi - AC_MSG_RESULT([$langinfo_ok]) -]) - -#-------------------------------------------------------------------- -# SC_CONFIG_MANPAGES -# -# Decide whether to use symlinks for linking the manpages and -# whether to compress the manpages after installation. -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --enable-man-symlinks -# --enable-man-compression=PROG -# -# Defines the following variable: -# -# MKLINKS_FLAGS - The apropriate flags for mkLinks -# according to the user's selection. -# -#-------------------------------------------------------------------- -AC_DEFUN(SC_CONFIG_MANPAGES, [ - - AC_MSG_CHECKING([whether to use symlinks for manpages]) - AC_ARG_ENABLE(man-symlinks, - [ --enable-man-symlinks use symlinks for the manpages], - test "$enableval" != "no" && MKLINKS_FLAGS="$MKLINKS_FLAGS --symlinks", - enableval="no") - AC_MSG_RESULT([$enableval]) - - AC_MSG_CHECKING([compression for manpages]) - AC_ARG_ENABLE(man-compression, - [ --enable-man-compression=PROG - compress the manpages with PROG], - test "$enableval" = "yes" && echo && AC_MSG_ERROR([missing argument to --enable-man-compression]) - test "$enableval" != "no" && MKLINKS_FLAGS="$MKLINKS_FLAGS --compress $enableval", - enableval="no") - AC_MSG_RESULT([$enableval]) - - AC_SUBST(MKLINKS_FLAGS) -]) - -#-------------------------------------------------------------------- -# SC_CONFIG_CFLAGS -# -# Try to determine the proper flags to pass to the compiler -# for building shared libraries and other such nonsense. -# -# Arguments: -# none -# -# Results: -# -# Defines and substitutes the following vars: -# -# DL_OBJS - Name of the object file that implements dynamic -# loading for Tcl on this system. -# DL_LIBS - Library file(s) to include in tclsh and other base -# applications in order for the "load" command to work. -# LDFLAGS - Flags to pass to the compiler when linking object -# files into an executable application binary such -# as tclsh. -# LD_SEARCH_FLAGS-Flags to pass to ld, such as "-R /usr/local/tcl/lib", -# that tell the run-time dynamic linker where to look -# for shared libraries such as libtcl.so. Depends on -# the variable LIB_RUNTIME_DIR in the Makefile. Could -# be the same as CC_SEARCH_FLAGS if ${CC} is used to link. -# CC_SEARCH_FLAGS-Flags to pass to ${CC}, such as "-Wl,-rpath,/usr/local/tcl/lib", -# that tell the run-time dynamic linker where to look -# for shared libraries such as libtcl.so. Depends on -# the variable LIB_RUNTIME_DIR in the Makefile. -# MAKE_LIB - Command to execute to build the a library; -# differs when building shared or static. -# MAKE_STUB_LIB - -# Command to execute to build a stub library. -# INSTALL_LIB - Command to execute to install a library; -# differs when building shared or static. -# INSTALL_STUB_LIB - -# Command to execute to install a stub library. -# STLIB_LD - Base command to use for combining object files -# into a static library. -# SHLIB_CFLAGS - Flags to pass to cc when compiling the components -# of a shared library (may request position-independent -# code, among other things). -# SHLIB_LD - Base command to use for combining object files -# into a shared library. -# SHLIB_LD_FLAGS -Flags to pass when building a shared library. This -# differes from the SHLIB_CFLAGS as it is not used -# when building object files or executables. -# SHLIB_LD_LIBS - Dependent libraries for the linker to scan when -# creating shared libraries. This symbol typically -# goes at the end of the "ld" commands that build -# shared libraries. The value of the symbol is -# "${LIBS}" if all of the dependent libraries should -# be specified when creating a shared library. If -# dependent libraries should not be specified (as on -# SunOS 4.x, where they cause the link to fail, or in -# general if Tcl and Tk aren't themselves shared -# libraries), then this symbol has an empty string -# as its value. -# SHLIB_SUFFIX - Suffix to use for the names of dynamically loadable -# extensions. An empty string means we don't know how -# to use shared libraries on this platform. -# TCL_SHLIB_LD_EXTRAS - Additional element which are added to SHLIB_LD_LIBS -# TK_SHLIB_LD_EXTRAS for the build of Tcl and Tk, but not recorded in the -# tclConfig.sh, since they are only used for the build -# of Tcl and Tk. -# Examples: MacOS X records the library version and -# compatibility version in the shared library. But -# of course the Tcl version of this is only used for Tcl. -# LIB_SUFFIX - Specifies everything that comes after the "libfoo" -# in a static or shared library name, using the $VERSION variable -# to put the version in the right place. This is used -# by platforms that need non-standard library names. -# Examples: ${VERSION}.so.1.1 on NetBSD, since it needs -# to have a version after the .so, and ${VERSION}.a -# on AIX, since a shared library needs to have -# a .a extension whereas shared objects for loadable -# extensions have a .so extension. Defaults to -# ${VERSION}${SHLIB_SUFFIX}. -# TCL_NEEDS_EXP_FILE - -# 1 means that an export file is needed to link to a -# shared library. -# TCL_EXP_FILE - The name of the installed export / import file which -# should be used to link to the Tcl shared library. -# Empty if Tcl is unshared. -# TCL_BUILD_EXP_FILE - -# The name of the built export / import file which -# should be used to link to the Tcl shared library. -# Empty if Tcl is unshared. -# CFLAGS_DEBUG - -# Flags used when running the compiler in debug mode -# CFLAGS_OPTIMIZE - -# Flags used when running the compiler in optimize mode -# EXTRA_CFLAGS -# -#-------------------------------------------------------------------- - -AC_DEFUN(SC_CONFIG_CFLAGS, [ - - # Step 0.a: Enable 64 bit support? - - AC_MSG_CHECKING([if 64bit support is requested]) - AC_ARG_ENABLE(64bit,[ --enable-64bit enable 64bit support (where applicable)],,enableval="no") - - if test "$enableval" = "yes"; then - do64bit=yes - else - do64bit=no - fi - AC_MSG_RESULT($do64bit) - - # Step 0.b: Enable Solaris 64 bit VIS support? - - AC_MSG_CHECKING([if 64bit Sparc VIS support is requested]) - AC_ARG_ENABLE(64bit-vis,[ --enable-64bit-vis enable 64bit Sparc VIS support],,enableval="no") - - if test "$enableval" = "yes"; then - # Force 64bit on with VIS - do64bit=yes - do64bitVIS=yes - else - do64bitVIS=no - fi - AC_MSG_RESULT($do64bitVIS) - - # Step 1: set the variable "system" to hold the name and version number - # for the system. This can usually be done via the "uname" command, but - # there are a few systems, like Next, where this doesn't work. - - AC_MSG_CHECKING([system version (for dynamic loading)]) - if test -f /usr/lib/NextStep/software_version; then - system=NEXTSTEP-`awk '/3/,/3/' /usr/lib/NextStep/software_version` - else - system=`uname -s`-`uname -r` - if test "$?" -ne 0 ; then - AC_MSG_RESULT([unknown (can't find uname command)]) - system=unknown - else - # Special check for weird MP-RAS system (uname returns weird - # results, and the version is kept in special file). - - if test -r /etc/.relid -a "X`uname -n`" = "X`uname -s`" ; then - system=MP-RAS-`awk '{print $3}' /etc/.relid'` - fi - if test "`uname -s`" = "AIX" ; then - system=AIX-`uname -v`.`uname -r` - fi - AC_MSG_RESULT($system) - fi - fi - - # Step 2: check for existence of -ldl library. This is needed because - # Linux can use either -ldl or -ldld for dynamic loading. - - AC_CHECK_LIB(dl, dlopen, have_dl=yes, have_dl=no) - - # Require ranlib early so we can override it in special cases below. - - AC_REQUIRE([AC_PROG_RANLIB]) - - # Step 3: set configuration options based on system name and version. - - do64bit_ok=no - EXTRA_CFLAGS="" - TCL_EXPORT_FILE_SUFFIX="" - UNSHARED_LIB_SUFFIX="" - TCL_TRIM_DOTS='`echo ${VERSION} | tr -d .`' - ECHO_VERSION='`echo ${VERSION}`' - TCL_LIB_VERSIONS_OK=ok - CFLAGS_DEBUG=-g - CFLAGS_OPTIMIZE=-O - if test "$GCC" = "yes" ; then - CFLAGS_WARNING="-Wall -Wconversion -Wno-implicit-int" - else - CFLAGS_WARNING="" - fi - TCL_NEEDS_EXP_FILE=0 - TCL_BUILD_EXP_FILE="" - TCL_EXP_FILE="" -dnl FIXME: Replace AC_CHECK_PROG with AC_CHECK_TOOL once cross compiling is fixed. -dnl AC_CHECK_TOOL(AR, ar) - AC_CHECK_PROG(AR, ar, ar) - if test "${AR}" = "" ; then - AC_MSG_ERROR([Required archive tool 'ar' not found on PATH.]) - fi - STLIB_LD='${AR} cr' - LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH" - PLAT_OBJS="" - case $system in - AIX-5.*) - if test "${TCL_THREADS}" = "1" -a "$GCC" != "yes" ; then - # AIX requires the _r compiler when gcc isn't being used - if test "${CC}" != "cc_r" ; then - CC=${CC}_r - fi - AC_MSG_RESULT(Using $CC for compiling with threads) - fi - LIBS="$LIBS -lc" - # AIX-5 uses ELF style dynamic libraries - SHLIB_CFLAGS="" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - if test "`uname -m`" = "ia64" ; then - # AIX-5 uses ELF style dynamic libraries on IA-64, but not PPC - SHLIB_LD="/usr/ccs/bin/ld -G -z text" - # AIX-5 has dl* in libc.so - DL_LIBS="" - if test "$GCC" = "yes" ; then - CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' - else - CC_SEARCH_FLAGS='-R${LIB_RUNTIME_DIR}' - fi - LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' - else - SHLIB_LD="${TCL_SRC_DIR}/unix/ldAix /bin/ld -bhalt:4 -bM:SRE -bE:lib.exp -H512 -T512 -bnoentry" - DL_LIBS="-ldl" - CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - TCL_NEEDS_EXP_FILE=1 - TCL_EXPORT_FILE_SUFFIX='${VERSION}\$\{DBGX\}.exp' - fi - - # Note: need the LIBS below, otherwise Tk won't find Tcl's - # symbols when dynamically loaded into tclsh. - - DL_OBJS="tclLoadDl.o" - LDFLAGS="" - - LD_LIBRARY_PATH_VAR="LIBPATH" - - # Check to enable 64-bit flags for compiler/linker - if test "$do64bit" = "yes" ; then - if test "$GCC" = "yes" ; then - AC_MSG_WARN("64bit mode not supported with GCC on $system") - else - do64bit_ok=yes - EXTRA_CFLAGS="-q64" - LDFLAGS="-q64" - RANLIB="${RANLIB} -X64" - AR="${AR} -X64" - SHLIB_LD_FLAGS="-b64" - fi - fi - ;; - AIX-*) - if test "${TCL_THREADS}" = "1" -a "$GCC" != "yes" ; then - # AIX requires the _r compiler when gcc isn't being used - if test "${CC}" != "cc_r" ; then - CC=${CC}_r - fi - AC_MSG_RESULT(Using $CC for compiling with threads) - fi - LIBS="$LIBS -lc" - SHLIB_CFLAGS="" - SHLIB_LD="${TCL_SRC_DIR}/unix/ldAix /bin/ld -bhalt:4 -bM:SRE -bE:lib.exp -H512 -T512 -bnoentry" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - LDFLAGS="" - CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - LD_LIBRARY_PATH_VAR="LIBPATH" - TCL_NEEDS_EXP_FILE=1 - TCL_EXPORT_FILE_SUFFIX='${VERSION}\$\{DBGX\}.exp' - - # AIX v<=4.1 has some different flags than 4.2+ - if test "$system" = "AIX-4.1" -o "`uname -v`" -lt "4" ; then - # upgrade to 2.5x egm 3/25/03 - AC_LIBOBJ(tclLoadAix.o) - HAVE_COMPAT=true - DL_LIBS="-lld" - fi - - # On AIX <=v4 systems, libbsd.a has to be linked in to support - # non-blocking file IO. This library has to be linked in after - # the MATH_LIBS or it breaks the pow() function. The way to - # insure proper sequencing, is to add it to the tail of MATH_LIBS. - # This library also supplies gettimeofday. - # - # AIX does not have a timezone field in struct tm. When the AIX - # bsd library is used, the timezone global and the gettimeofday - # methods are to be avoided for timezone deduction instead, we - # deduce the timezone by comparing the localtime result on a - # known GMT value. - - AC_CHECK_LIB(bsd, gettimeofday, libbsd=yes, libbsd=no) - if test $libbsd = yes; then - MATH_LIBS="$MATH_LIBS -lbsd" - AC_DEFINE(USE_DELTA_FOR_TZ) - fi - - # Check to enable 64-bit flags for compiler/linker - if test "$do64bit" = "yes" ; then - if test "$GCC" = "yes" ; then - AC_MSG_WARN("64bit mode not supported with GCC on $system") - else - do64bit_ok=yes - EXTRA_CFLAGS="-q64" - LDFLAGS="-q64" - RANLIB="${RANLIB} -X64" - AR="${AR} -X64" - SHLIB_LD_FLAGS="-b64" - fi - fi - ;; - BSD/OS-2.1*|BSD/OS-3*) - SHLIB_CFLAGS="" - SHLIB_LD="shlicc -r" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - LDFLAGS="" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - ;; - BSD/OS-4.*) - SHLIB_CFLAGS="-export-dynamic -fPIC" - SHLIB_LD="cc -shared" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - LDFLAGS="-export-dynamic" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - ;; - dgux*) - SHLIB_CFLAGS="-K PIC" - SHLIB_LD="cc -G" - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - LDFLAGS="" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - ;; - HP-UX-*.11.*) - # Use updated header definitions where possible - AC_DEFINE(_XOPEN_SOURCE) # Use the XOPEN network library - AC_DEFINE(_XOPEN_SOURCE_EXTENDED) # Use the XOPEN network library - LIBS="$LIBS -lxnet" # Use the XOPEN network library - - SHLIB_SUFFIX=".sl" - AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no) - if test "$tcl_ok" = yes; then - SHLIB_CFLAGS="+z" - SHLIB_LD="ld -b" - SHLIB_LD_LIBS='${LIBS}' - DL_OBJS="tclLoadShl.o" - DL_LIBS="-ldld" - LDFLAGS="-Wl,-E" - CC_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.' - LD_SEARCH_FLAGS='+s +b ${LIB_RUNTIME_DIR}:.' - LD_LIBRARY_PATH_VAR="SHLIB_PATH" - fi - - # Users may want PA-RISC 1.1/2.0 portable code - needs HP cc - #EXTRA_CFLAGS="+DAportable" - - # Check to enable 64-bit flags for compiler/linker - if test "$do64bit" = "yes" ; then - if test "$GCC" = "yes" ; then - hpux_arch=`gcc -dumpmachine` - case $hpux_arch in - hppa64*) - # 64-bit gcc in use. Fix flags for GNU ld. - do64bit_ok=yes - SHLIB_LD="gcc -shared" - SHLIB_LD_LIBS="" - LD_SEARCH_FLAGS='' - CC_SEARCH_FLAGS='' - ;; - *) - AC_MSG_WARN("64bit mode not supported with GCC on $system") - ;; - esac - else - do64bit_ok=yes - if test "`uname -m`" = "ia64" ; then - EXTRA_CFLAGS="+DD64" - LDFLAGS="+DD64 $LDFLAGS" - else - EXTRA_CFLAGS="+DA2.0W" - LDFLAGS="+DA2.0W $LDFLAGS" - fi - fi - fi - ;; - HP-UX-*.08.*|HP-UX-*.09.*|HP-UX-*.10.*) - SHLIB_SUFFIX=".sl" - AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no) - if test "$tcl_ok" = yes; then - SHLIB_CFLAGS="+z" - SHLIB_LD="ld -b" - SHLIB_LD_LIBS="" - DL_OBJS="tclLoadShl.o" - DL_LIBS="-ldld" - LDFLAGS="-Wl,-E" - CC_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.' - LD_SEARCH_FLAGS='+s +b ${LIB_RUNTIME_DIR}:.' - LD_LIBRARY_PATH_VAR="SHLIB_PATH" - fi - ;; - IRIX-4.*) - SHLIB_CFLAGS="-G 0" - SHLIB_SUFFIX=".a" - SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0" - SHLIB_LD_LIBS='${LIBS}' - DL_OBJS="tclLoadAout.o" - DL_LIBS="" - LDFLAGS="-Wl,-D,08000000" - CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - SHARED_LIB_SUFFIX='${VERSION}\$\{DBGX\}.a' - ;; - IRIX-5.*) - SHLIB_CFLAGS="" - SHLIB_LD="ld -shared -rdata_shared" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="" - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' - EXTRA_CFLAGS="" - LDFLAGS="" - ;; - IRIX-6.*|IRIX64-6.5*) - SHLIB_CFLAGS="" - SHLIB_LD="ld -n32 -shared -rdata_shared" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="" - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' - if test "$GCC" = "yes" ; then - EXTRA_CFLAGS="-mabi=n32" - LDFLAGS="-mabi=n32" - else - case $system in - IRIX-6.3) - # Use to build 6.2 compatible binaries on 6.3. - EXTRA_CFLAGS="-n32 -D_OLD_TERMIOS" - ;; - *) - EXTRA_CFLAGS="-n32" - ;; - esac - LDFLAGS="-n32" - fi - ;; - IRIX64-6.*) - SHLIB_CFLAGS="" - SHLIB_LD="ld -n32 -shared -rdata_shared" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="" - LDFLAGS="" - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' - - # Check to enable 64-bit flags for compiler/linker - - if test "$do64bit" = "yes" ; then - if test "$GCC" = "yes" ; then - AC_MSG_WARN([64bit mode not supported by gcc]) - else - do64bit_ok=yes - SHLIB_LD="ld -64 -shared -rdata_shared" - EXTRA_CFLAGS="-64" - LDFLAGS="-64" - fi - fi - ;; - Linux*) - SHLIB_CFLAGS="-fPIC" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - - # egcs-2.91.66 on Redhat Linux 6.0 generates lots of warnings - # when you inline the string and math operations. Turn this off to - # get rid of the warnings. - - CFLAGS_OPTIMIZE="${CFLAGS_OPTIMIZE} -D__NO_STRING_INLINES -D__NO_MATH_INLINES" - - if test "$have_dl" = yes; then - SHLIB_LD="${CC} -shared" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - LDFLAGS="-rdynamic" - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - else - AC_CHECK_HEADER(dld.h, [ - SHLIB_LD="ld -shared" - DL_OBJS="tclLoadDld.o" - DL_LIBS="-ldld" - LDFLAGS="" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS=""]) - fi - if test "`uname -m`" = "alpha" ; then - EXTRA_CFLAGS="-mieee" - fi - - # The combo of gcc + glibc has a bug related - # to inlining of functions like strtod(). The - # -fno-builtin flag should address this problem - # but it does not work. The -fno-inline flag - # is kind of overkill but it works. - # Disable inlining only when one of the - # files in compat/*.c is being linked in. - if test x"${HAVE_COMPAT}" = "xtrue" ; then - EXTRA_CFLAGS="${EXTRA_CFLAGS} -fno-inline" - fi - - # XIM peeking works under XFree86. - AC_DEFINE(PEEK_XCLOSEIM) - - ;; - GNU*) - SHLIB_CFLAGS="-fPIC" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - - if test "$have_dl" = yes; then - SHLIB_LD="${CC} -shared" - DL_OBJS="" - DL_LIBS="-ldl" - LDFLAGS="-rdynamic" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - else - AC_CHECK_HEADER(dld.h, [ - SHLIB_LD="ld -shared" - DL_OBJS="" - DL_LIBS="-ldld" - LDFLAGS="" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS=""]) - fi - if test "`uname -m`" = "alpha" ; then - EXTRA_CFLAGS="-mieee" - fi - ;; - MP-RAS-02*) - SHLIB_CFLAGS="-K PIC" - SHLIB_LD="cc -G" - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - LDFLAGS="" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - ;; - MP-RAS-*) - SHLIB_CFLAGS="-K PIC" - SHLIB_LD="cc -G" - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - LDFLAGS="-Wl,-Bexport" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - ;; - NetBSD-*|FreeBSD-[[1-2]].*|OpenBSD-*) - # Not available on all versions: check for include file. - AC_CHECK_HEADER(dlfcn.h, [ - # NetBSD/SPARC needs -fPIC, -fpic will not do. - SHLIB_CFLAGS="-fPIC" - SHLIB_LD="ld -Bshareable -x" - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="" - LDFLAGS="" - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' - AC_MSG_CHECKING(for ELF) - AC_EGREP_CPP(yes, [ -#ifdef __ELF__ - yes -#endif - ], - AC_MSG_RESULT(yes) - SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so', - AC_MSG_RESULT(no) - SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1.0' - ) - ], [ - SHLIB_CFLAGS="" - SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".a" - DL_OBJS="tclLoadAout.o" - DL_LIBS="" - LDFLAGS="" - CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a' - ]) - - # FreeBSD doesn't handle version numbers with dots. - - UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a' - TCL_LIB_VERSIONS_OK=nodots - ;; - FreeBSD-*) - # FreeBSD 3.* and greater have ELF. - SHLIB_CFLAGS="-fPIC" - SHLIB_LD="ld -Bshareable -x" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="" - LDFLAGS="-export-dynamic" - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' - if test "${TCL_THREADS}" = "1" ; then - # The -pthread needs to go in the CFLAGS, not LIBS - LIBS=`echo $LIBS | sed s/-pthread//` - EXTRA_CFLAGS="-pthread" - LDFLAGS="$LDFLAGS -pthread" - fi - case $system in - FreeBSD-3.*) - # FreeBSD-3 doesn't handle version numbers with dots. - UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a' - SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so' - TCL_LIB_VERSIONS_OK=nodots - ;; - esac - ;; - Rhapsody-*|Darwin-*) - SHLIB_CFLAGS="-fno-common" - SHLIB_LD="cc -dynamiclib \${LDFLAGS}" - TCL_SHLIB_LD_EXTRAS="-compatibility_version ${TCL_VERSION} -current_version \${VERSION} -install_name \${DYLIB_INSTALL_DIR}/\${TCL_LIB_FILE} -prebind -seg1addr 0xa000000" - TK_SHLIB_LD_EXTRAS="-compatibility_version ${TK_VERSION} -current_version \${VERSION} -install_name \${DYLIB_INSTALL_DIR}/\${TK_LIB_FILE} -prebind -seg1addr 0xb000000" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".dylib" - DL_OBJS="tclLoadDyld.o" - PLAT_OBJS="tclMacOSXBundle.o" - DL_LIBS="" - LDFLAGS="-prebind" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - CFLAGS_OPTIMIZE="-Os" - LD_LIBRARY_PATH_VAR="DYLD_LIBRARY_PATH" - # for compatibility with autoconf vers 2.13 : - HACK="" - EXTRA_CFLAGS="-DMA${HACK}C_OSX_TCL -DHAVE_CFBUNDLE -DUSE_VFORK -DTCL_DEFAULT_ENCODING=\\\"utf-8\\\"" - LIBS="$LIBS -framework CoreFoundation" - ;; - NEXTSTEP-*) - SHLIB_CFLAGS="" - SHLIB_LD="cc -nostdlib -r" - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadNext.o" - DL_LIBS="" - LDFLAGS="" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - ;; - OS/390-*) - CFLAGS_OPTIMIZE="" # Optimizer is buggy - AC_DEFINE(_OE_SOCKETS) # needed in sys/socket.h - ;; - OSF1-1.0|OSF1-1.1|OSF1-1.2) - # OSF/1 1.[012] from OSF, and derivatives, including Paragon OSF/1 - SHLIB_CFLAGS="" - # Hack: make package name same as library name - SHLIB_LD='ld -R -export $@:' - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadOSF.o" - DL_LIBS="" - LDFLAGS="" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - ;; - OSF1-1.*) - # OSF/1 1.3 from OSF using ELF, and derivatives, including AD2 - SHLIB_CFLAGS="-fPIC" - if test "$SHARED_BUILD" = "1" ; then - SHLIB_LD="ld -shared" - else - SHLIB_LD="ld -non_shared" - fi - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="" - LDFLAGS="" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - ;; - OSF1-V*) - # Digital OSF/1 - SHLIB_CFLAGS="" - if test "$SHARED_BUILD" = "1" ; then - SHLIB_LD='ld -shared -expect_unresolved "*"' - else - SHLIB_LD='ld -non_shared -expect_unresolved "*"' - fi - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="" - LDFLAGS="" - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' - if test "$GCC" != "yes" ; then - EXTRA_CFLAGS="-DHAVE_TZSET -std1" - fi - # see pthread_intro(3) for pthread support on osf1, k.furukawa - if test "${TCL_THREADS}" = "1" ; then - EXTRA_CFLAGS="${EXTRA_CFLAGS} -DHAVE_PTHREAD_ATTR_SETSTACKSIZE" - EXTRA_CFLAGS="${EXTRA_CFLAGS} -DTCL_THREAD_STACK_MIN=PTHREAD_STACK_MIN*64" - LIBS=`echo $LIBS | sed s/-lpthreads//` - if test "$GCC" = "yes" ; then - LIBS="$LIBS -lpthread -lmach -lexc" - else - EXTRA_CFLAGS="${EXTRA_CFLAGS} -pthread" - LDFLAGS="-pthread" - fi - fi - - ;; - QNX-6*) - # QNX RTP - # This may work for all QNX, but it was only reported for v6. - SHLIB_CFLAGS="-fPIC" - SHLIB_LD="ld -Bshareable -x" - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - # dlopen is in -lc on QNX - DL_LIBS="" - LDFLAGS="" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - ;; - RISCos-*) - SHLIB_CFLAGS="-G 0" - SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".a" - DL_OBJS="tclLoadAout.o" - DL_LIBS="" - LDFLAGS="-Wl,-D,08000000" - CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - ;; - SCO_SV-3.2*) - # Note, dlopen is available only on SCO 3.2.5 and greater. However, - # this test works, since "uname -s" was non-standard in 3.2.4 and - # below. - if test "$GCC" = "yes" ; then - SHLIB_CFLAGS="-fPIC -melf" - LDFLAGS="-melf -Wl,-Bexport" - else - SHLIB_CFLAGS="-Kpic -belf" - LDFLAGS="-belf -Wl,-Bexport" - fi - SHLIB_LD="ld -G" - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - ;; - SINIX*5.4*) - SHLIB_CFLAGS="-K PIC" - SHLIB_LD="cc -G" - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - LDFLAGS="" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - ;; - SunOS-4*) - SHLIB_CFLAGS="-PIC" - SHLIB_LD="ld" - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - LDFLAGS="" - CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - - # SunOS can't handle version numbers with dots in them in library - # specs, like -ltcl7.5, so use -ltcl75 instead. Also, it - # requires an extra version number at the end of .so file names. - # So, the library has to have a name like libtcl75.so.1.0 - - SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1.0' - UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a' - TCL_LIB_VERSIONS_OK=nodots - ;; - SunOS-5.[[0-6]]*) - - # Note: If _REENTRANT isn't defined, then Solaris - # won't define thread-safe library routines. - - AC_DEFINE(_REENTRANT) - AC_DEFINE(_POSIX_PTHREAD_SEMANTICS) - - SHLIB_CFLAGS="-KPIC" - - # Note: need the LIBS below, otherwise Tk won't find Tcl's - # symbols when dynamically loaded into tclsh. - - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - LDFLAGS="" - if test "$GCC" = "yes" ; then - SHLIB_LD="$CC -shared" - CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - else - SHLIB_LD="/usr/ccs/bin/ld -G -z text" - CC_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - fi - ;; - SunOS-5*) - - # Note: If _REENTRANT isn't defined, then Solaris - # won't define thread-safe library routines. - - AC_DEFINE(_REENTRANT) - AC_DEFINE(_POSIX_PTHREAD_SEMANTICS) - - SHLIB_CFLAGS="-KPIC" - LDFLAGS="" - - # Check to enable 64-bit flags for compiler/linker - if test "$do64bit" = "yes" ; then - arch=`isainfo` - if test "$arch" = "sparcv9 sparc" ; then - if test "$GCC" = "yes" ; then - AC_MSG_WARN("64bit mode not supported with GCC on $system") - else - do64bit_ok=yes - if test "$do64bitVIS" = "yes" ; then - EXTRA_CFLAGS="-xarch=v9a" - LDFLAGS="-xarch=v9a" - else - EXTRA_CFLAGS="-xarch=v9" - LDFLAGS="-xarch=v9" - fi - fi - else - AC_MSG_WARN("64bit mode only supported sparcv9 system") - fi - fi - - # Note: need the LIBS below, otherwise Tk won't find Tcl's - # symbols when dynamically loaded into tclsh. - - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - if test "$GCC" = "yes" ; then - SHLIB_LD="$CC -shared" - CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - else - SHLIB_LD="/usr/ccs/bin/ld -G -z text" - CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' - fi - ;; - ULTRIX-4.*) - SHLIB_CFLAGS="-G 0" - SHLIB_SUFFIX=".a" - SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0" - SHLIB_LD_LIBS='${LIBS}' - DL_OBJS="tclLoadAout.o" - DL_LIBS="" - LDFLAGS="-Wl,-D,08000000" - CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - if test "$GCC" != "yes" ; then - EXTRA_CFLAGS="-DHAVE_TZSET -std1" - fi - ;; - UNIX_SV* | UnixWare-5*) - SHLIB_CFLAGS="-KPIC" - SHLIB_LD="cc -G" - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - # Some UNIX_SV* systems (unixware 1.1.2 for example) have linkers - # that don't grok the -Bexport option. Test that it does. - hold_ldflags=$LDFLAGS - AC_MSG_CHECKING(for ld accepts -Bexport flag) - LDFLAGS="${LDFLAGS} -Wl,-Bexport" - AC_TRY_LINK(, [int i;], found=yes, found=no) - LDFLAGS=$hold_ldflags - AC_MSG_RESULT($found) - if test $found = yes; then - LDFLAGS="-Wl,-Bexport" - else - LDFLAGS="" - fi - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - ;; - esac - - if test "$do64bit" = "yes" -a "$do64bit_ok" = "no" ; then - AC_MSG_WARN("64bit support being disabled -- don\'t know magic for this platform") - fi - - # Step 4: If pseudo-static linking is in use (see K. B. Kenny, "Dynamic - # Loading for Tcl -- What Became of It?". Proc. 2nd Tcl/Tk Workshop, - # New Orleans, LA, Computerized Processes Unlimited, 1994), then we need - # to determine which of several header files defines the a.out file - # format (a.out.h, sys/exec.h, or sys/exec_aout.h). At present, we - # support only a file format that is more or less version-7-compatible. - # In particular, - # - a.out files must begin with `struct exec'. - # - the N_TXTOFF on the `struct exec' must compute the seek address - # of the text segment - # - The `struct exec' must contain a_magic, a_text, a_data, a_bss - # and a_entry fields. - # The following compilation should succeed if and only if either sys/exec.h - # or a.out.h is usable for the purpose. - # - # Note that the modified COFF format used on MIPS Ultrix 4.x is usable; the - # `struct exec' includes a second header that contains information that - # duplicates the v7 fields that are needed. - - if test "x$DL_OBJS" = "xtclLoadAout.o" ; then - AC_MSG_CHECKING(sys/exec.h) - AC_TRY_COMPILE([#include <sys/exec.h>],[ - struct exec foo; - unsigned long seek; - int flag; -#if defined(__mips) || defined(mips) - seek = N_TXTOFF (foo.ex_f, foo.ex_o); -#else - seek = N_TXTOFF (foo); -#endif - flag = (foo.a_magic == OMAGIC); - return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry; - ], tcl_ok=usable, tcl_ok=unusable) - AC_MSG_RESULT($tcl_ok) - if test $tcl_ok = usable; then - AC_DEFINE(USE_SYS_EXEC_H) - else - AC_MSG_CHECKING(a.out.h) - AC_TRY_COMPILE([#include <a.out.h>],[ - struct exec foo; - unsigned long seek; - int flag; -#if defined(__mips) || defined(mips) - seek = N_TXTOFF (foo.ex_f, foo.ex_o); -#else - seek = N_TXTOFF (foo); -#endif - flag = (foo.a_magic == OMAGIC); - return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry; - ], tcl_ok=usable, tcl_ok=unusable) - AC_MSG_RESULT($tcl_ok) - if test $tcl_ok = usable; then - AC_DEFINE(USE_A_OUT_H) - else - AC_MSG_CHECKING(sys/exec_aout.h) - AC_TRY_COMPILE([#include <sys/exec_aout.h>],[ - struct exec foo; - unsigned long seek; - int flag; -#if defined(__mips) || defined(mips) - seek = N_TXTOFF (foo.ex_f, foo.ex_o); -#else - seek = N_TXTOFF (foo); -#endif - flag = (foo.a_midmag == OMAGIC); - return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry; - ], tcl_ok=usable, tcl_ok=unusable) - AC_MSG_RESULT($tcl_ok) - if test $tcl_ok = usable; then - AC_DEFINE(USE_SYS_EXEC_AOUT_H) - else - DL_OBJS="" - fi - fi - fi - fi - - # Step 5: disable dynamic loading if requested via a command-line switch. - - AC_ARG_ENABLE(load, [ --disable-load disallow dynamic loading and "load" command], - [tcl_ok=$enableval], [tcl_ok=yes]) - if test "$tcl_ok" = "no"; then - DL_OBJS="" - fi - - if test "x$DL_OBJS" != "x" ; then - BUILD_DLTEST="\$(DLTEST_TARGETS)" - else - echo "Can't figure out how to do dynamic loading or shared libraries" - echo "on this system." - SHLIB_CFLAGS="" - SHLIB_LD="" - SHLIB_SUFFIX="" - DL_OBJS="tclLoadNone.o" - DL_LIBS="" - LDFLAGS="" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - BUILD_DLTEST="" - fi - - # If we're running gcc, then change the C flags for compiling shared - # libraries to the right flags for gcc, instead of those for the - # standard manufacturer compiler. - - if test "$DL_OBJS" != "tclLoadNone.o" ; then - if test "$GCC" = "yes" ; then - case $system in - AIX-*) - ;; - BSD/OS*) - ;; - IRIX*) - ;; - NetBSD-*|FreeBSD-*|OpenBSD-*) - ;; - Rhapsody-*|Darwin-*) - ;; - RISCos-*) - ;; - SCO_SV-3.2*) - ;; - ULTRIX-4.*) - ;; - *) - SHLIB_CFLAGS="-fPIC" - ;; - esac - fi - fi - - if test "$SHARED_LIB_SUFFIX" = "" ; then - SHARED_LIB_SUFFIX='${VERSION}\$\{DBGX\}${SHLIB_SUFFIX}' - fi - if test "$UNSHARED_LIB_SUFFIX" = "" ; then - UNSHARED_LIB_SUFFIX='${VERSION}\$\{DBGX\}.a' - fi - - if test "${SHARED_BUILD}" = "1" && test "${SHLIB_SUFFIX}" != "" ; then - LIB_SUFFIX=${SHARED_LIB_SUFFIX} - MAKE_LIB='${SHLIB_LD} -o [$]@ ${SHLIB_LD_FLAGS} ${OBJS} ${SHLIB_LD_LIBS} ${TCL_SHLIB_LD_EXTRAS} ${TK_SHLIB_LD_EXTRAS} ${LD_SEARCH_FLAGS}' - INSTALL_LIB='$(INSTALL_LIBRARY) $(LIB_FILE) $(LIB_INSTALL_DIR)/$(LIB_FILE)' - else - LIB_SUFFIX=${UNSHARED_LIB_SUFFIX} - - if test "$RANLIB" = "" ; then - MAKE_LIB='$(STLIB_LD) [$]@ ${OBJS}' - INSTALL_LIB='$(INSTALL_LIBRARY) $(LIB_FILE) $(LIB_INSTALL_DIR)/$(LIB_FILE)' - else - MAKE_LIB='${STLIB_LD} [$]@ ${OBJS} ; ${RANLIB} [$]@' - INSTALL_LIB='$(INSTALL_LIBRARY) $(LIB_FILE) $(LIB_INSTALL_DIR)/$(LIB_FILE) ; (cd $(LIB_INSTALL_DIR) ; $(RANLIB) $(LIB_FILE))' - fi - -dnl Not at all clear what this was doing in Tcl's configure.in -dnl or why it was needed was needed. In any event, this sort of -dnl things needs to be done in the big loop above. -dnl REMOVE THIS BLOCK LATER! (mdejong) -dnl case $system in -dnl BSD/OS*) -dnl ;; -dnl AIX-[[1-4]].*) -dnl ;; -dnl *) -dnl SHLIB_LD_LIBS="" -dnl ;; -dnl esac - fi - - - # Stub lib does not depend on shared/static configuration - if test "$RANLIB" = "" ; then - MAKE_STUB_LIB='${STLIB_LD} [$]@ ${STUB_LIB_OBJS}' - INSTALL_STUB_LIB='$(INSTALL_LIBRARY) $(STUB_LIB_FILE) $(LIB_INSTALL_DIR)/$(STUB_LIB_FILE)' - else - MAKE_STUB_LIB='${STLIB_LD} [$]@ ${STUB_LIB_OBJS} ; ${RANLIB} [$]@' - INSTALL_STUB_LIB='$(INSTALL_LIBRARY) $(STUB_LIB_FILE) $(LIB_INSTALL_DIR)/$(STUB_LIB_FILE) ; (cd $(LIB_INSTALL_DIR) ; $(RANLIB) $(STUB_LIB_FILE))' - fi - - - AC_SUBST(DL_LIBS) - - AC_SUBST(DL_OBJS) - AC_SUBST(PLAT_OBJS) - AC_SUBST(CFLAGS) - AC_SUBST(CFLAGS_DEBUG) - AC_SUBST(CFLAGS_OPTIMIZE) - AC_SUBST(CFLAGS_WARNING) - AC_SUBST(EXTRA_CFLAGS) - - AC_SUBST(LDFLAGS) - AC_SUBST(LDFLAGS_DEBUG) - AC_SUBST(LDFLAGS_OPTIMIZE) - AC_SUBST(CC_SEARCH_FLAGS) - AC_SUBST(LD_SEARCH_FLAGS) - - AC_SUBST(STLIB_LD) - AC_SUBST(SHLIB_LD) - AC_SUBST(TCL_SHLIB_LD_EXTRAS) - AC_SUBST(TK_SHLIB_LD_EXTRAS) - AC_SUBST(SHLIB_LD_FLAGS) - AC_SUBST(SHLIB_LD_LIBS) - AC_SUBST(SHLIB_CFLAGS) - AC_SUBST(SHLIB_SUFFIX) - - AC_SUBST(MAKE_LIB) - AC_SUBST(MAKE_STUB_LIB) - AC_SUBST(INSTALL_LIB) - AC_SUBST(INSTALL_STUB_LIB) - AC_SUBST(RANLIB) -]) - -#-------------------------------------------------------------------- -# SC_SERIAL_PORT -# -# Determine which interface to use to talk to the serial port. -# Note that #include lines must begin in leftmost column for -# some compilers to recognize them as preprocessor directives, -# and some build environments have stdin not pointing at a -# pseudo-terminal (usually /dev/null instead.) -# -# Arguments: -# none -# -# Results: -# -# Defines only one of the following vars: -# HAVE_SYS_MODEM_H -# USE_TERMIOS -# USE_TERMIO -# USE_SGTTY -# -#-------------------------------------------------------------------- - -AC_DEFUN(SC_SERIAL_PORT, [ - AC_CHECK_HEADERS(sys/modem.h) - AC_MSG_CHECKING([termios vs. termio vs. sgtty]) - AC_CACHE_VAL(tcl_cv_api_serial, [ - AC_TRY_RUN([ -#include <termios.h> - -int main() { - struct termios t; - if (tcgetattr(0, &t) == 0) { - cfsetospeed(&t, 0); - t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB; - return 0; - } - return 1; -}], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no) - if test $tcl_cv_api_serial = no ; then - AC_TRY_RUN([ -#include <termio.h> - -int main() { - struct termio t; - if (ioctl(0, TCGETA, &t) == 0) { - t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB; - return 0; - } - return 1; -}], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no) - fi - if test $tcl_cv_api_serial = no ; then - AC_TRY_RUN([ -#include <sgtty.h> - -int main() { - struct sgttyb t; - if (ioctl(0, TIOCGETP, &t) == 0) { - t.sg_ospeed = 0; - t.sg_flags |= ODDP | EVENP | RAW; - return 0; - } - return 1; -}], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=no, tcl_cv_api_serial=no) - fi - if test $tcl_cv_api_serial = no ; then - AC_TRY_RUN([ -#include <termios.h> -#include <errno.h> - -int main() { - struct termios t; - if (tcgetattr(0, &t) == 0 - || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { - cfsetospeed(&t, 0); - t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB; - return 0; - } - return 1; -}], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no) - fi - if test $tcl_cv_api_serial = no; then - AC_TRY_RUN([ -#include <termio.h> -#include <errno.h> - -int main() { - struct termio t; - if (ioctl(0, TCGETA, &t) == 0 - || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { - t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB; - return 0; - } - return 1; - }], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no) - fi - if test $tcl_cv_api_serial = no; then - AC_TRY_RUN([ -#include <sgtty.h> -#include <errno.h> - -int main() { - struct sgttyb t; - if (ioctl(0, TIOCGETP, &t) == 0 - || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { - t.sg_ospeed = 0; - t.sg_flags |= ODDP | EVENP | RAW; - return 0; - } - return 1; -}], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=none, tcl_cv_api_serial=none) - fi]) - case $tcl_cv_api_serial in - termios) AC_DEFINE(USE_TERMIOS);; - termio) AC_DEFINE(USE_TERMIO);; - sgtty) AC_DEFINE(USE_SGTTY);; - esac - AC_MSG_RESULT($tcl_cv_api_serial) -]) - -#-------------------------------------------------------------------- -# SC_MISSING_POSIX_HEADERS -# -# Supply substitutes for missing POSIX header files. Special -# notes: -# - stdlib.h doesn't define strtol, strtoul, or -# strtod insome versions of SunOS -# - some versions of string.h don't declare procedures such -# as strstr -# -# Arguments: -# none -# -# Results: -# -# Defines some of the following vars: -# NO_DIRENT_H -# NO_ERRNO_H -# NO_VALUES_H -# NO_LIMITS_H -# NO_STDLIB_H -# NO_STRING_H -# NO_SYS_WAIT_H -# NO_DLFCN_H -# HAVE_UNISTD_H -# HAVE_SYS_PARAM_H -# -# HAVE_STRING_H ? -# -#-------------------------------------------------------------------- - -AC_DEFUN(SC_MISSING_POSIX_HEADERS, [ - AC_MSG_CHECKING(dirent.h) - AC_TRY_LINK([#include <sys/types.h> -#include <dirent.h>], [ -#ifndef _POSIX_SOURCE -# ifdef __Lynx__ - /* - * Generate compilation error to make the test fail: Lynx headers - * are only valid if really in the POSIX environment. - */ - - missing_procedure(); -# endif -#endif -DIR *d; -struct dirent *entryPtr; -char *p; -d = opendir("foobar"); -entryPtr = readdir(d); -p = entryPtr->d_name; -closedir(d); -], tcl_ok=yes, tcl_ok=no) - - if test $tcl_ok = no; then - AC_DEFINE(NO_DIRENT_H) - fi - - AC_MSG_RESULT($tcl_ok) - AC_CHECK_HEADER(errno.h, , [AC_DEFINE(NO_ERRNO_H)]) - AC_CHECK_HEADER(float.h, , [AC_DEFINE(NO_FLOAT_H)]) - AC_CHECK_HEADER(values.h, , [AC_DEFINE(NO_VALUES_H)]) - AC_CHECK_HEADER(limits.h, , [AC_DEFINE(NO_LIMITS_H)]) - AC_CHECK_HEADER(stdlib.h, tcl_ok=1, tcl_ok=0) - AC_EGREP_HEADER(strtol, stdlib.h, , tcl_ok=0) - AC_EGREP_HEADER(strtoul, stdlib.h, , tcl_ok=0) - AC_EGREP_HEADER(strtod, stdlib.h, , tcl_ok=0) - if test $tcl_ok = 0; then - AC_DEFINE(NO_STDLIB_H) - fi - AC_CHECK_HEADER(string.h, tcl_ok=1, tcl_ok=0) - AC_EGREP_HEADER(strstr, string.h, , tcl_ok=0) - AC_EGREP_HEADER(strerror, string.h, , tcl_ok=0) - - # See also memmove check below for a place where NO_STRING_H can be - # set and why. - - if test $tcl_ok = 0; then - AC_DEFINE(NO_STRING_H) - fi - - AC_CHECK_HEADER(sys/wait.h, , [AC_DEFINE(NO_SYS_WAIT_H)]) - AC_CHECK_HEADER(dlfcn.h, , [AC_DEFINE(NO_DLFCN_H)]) - - # OS/390 lacks sys/param.h (and doesn't need it, by chance). - - AC_HAVE_HEADERS(unistd.h sys/param.h) - -]) - -#-------------------------------------------------------------------- -# SC_PATH_X -# -# Locate the X11 header files and the X11 library archive. Try -# the ac_path_x macro first, but if it doesn't find the X stuff -# (e.g. because there's no xmkmf program) then check through -# a list of possible directories. Under some conditions the -# autoconf macro will return an include directory that contains -# no include files, so double-check its result just to be safe. -# -# Arguments: -# none -# -# Results: -# -# Sets the the following vars: -# XINCLUDES -# XLIBSW -# -#-------------------------------------------------------------------- - -AC_DEFUN(SC_PATH_X, [ - AC_PATH_X - not_really_there="" - if test "$no_x" = ""; then - if test "$x_includes" = ""; then - AC_TRY_CPP([#include <X11/XIntrinsic.h>], , not_really_there="yes") - else - if test ! -r $x_includes/X11/Intrinsic.h; then - not_really_there="yes" - fi - fi - fi - if test "$no_x" = "yes" -o "$not_really_there" = "yes"; then - AC_MSG_CHECKING(for X11 header files) - found_xincludes="no" - AC_TRY_CPP([#include <X11/Intrinsic.h>], found_xincludes="yes", found_xincludes="no") - if test "$found_xincludes" = "no"; then - dirs="/usr/unsupported/include /usr/local/include /usr/X386/include /usr/X11R6/include /usr/X11R5/include /usr/include/X11R5 /usr/include/X11R4 /usr/openwin/include /usr/X11/include /usr/sww/include" - for i in $dirs ; do - if test -r $i/X11/Intrinsic.h; then - AC_MSG_RESULT($i) - XINCLUDES=" -I$i" - found_xincludes="yes" - break - fi - done - fi - else - if test "$x_includes" != ""; then - XINCLUDES="-I$x_includes" - found_xincludes="yes" - fi - fi - if test found_xincludes = "no"; then - AC_MSG_RESULT(couldn't find any!) - fi - - if test "$no_x" = yes; then - AC_MSG_CHECKING(for X11 libraries) - XLIBSW=nope - dirs="/usr/unsupported/lib /usr/local/lib /usr/X386/lib /usr/X11R6/lib /usr/X11R5/lib /usr/lib/X11R5 /usr/lib/X11R4 /usr/openwin/lib /usr/X11/lib /usr/sww/X11/lib" - for i in $dirs ; do - if test -r $i/libX11.a -o -r $i/libX11.so -o -r $i/libX11.sl; then - AC_MSG_RESULT($i) - XLIBSW="-L$i -lX11" - x_libraries="$i" - break - fi - done - else - if test "$x_libraries" = ""; then - XLIBSW=-lX11 - else - XLIBSW="-L$x_libraries -lX11" - fi - fi - if test "$XLIBSW" = nope ; then - AC_CHECK_LIB(Xwindow, XCreateWindow, XLIBSW=-lXwindow) - fi - if test "$XLIBSW" = nope ; then - AC_MSG_RESULT(couldn't find any! Using -lX11.) - XLIBSW=-lX11 - fi -]) -#-------------------------------------------------------------------- -# SC_BLOCKING_STYLE -# -# The statements below check for systems where POSIX-style -# non-blocking I/O (O_NONBLOCK) doesn't work or is unimplemented. -# On these systems (mostly older ones), use the old BSD-style -# FIONBIO approach instead. -# -# Arguments: -# none -# -# Results: -# -# Defines some of the following vars: -# HAVE_SYS_IOCTL_H -# HAVE_SYS_FILIO_H -# USE_FIONBIO -# O_NONBLOCK -# -#-------------------------------------------------------------------- - -AC_DEFUN(SC_BLOCKING_STYLE, [ - AC_CHECK_HEADERS(sys/ioctl.h) - AC_CHECK_HEADERS(sys/filio.h) - AC_MSG_CHECKING([FIONBIO vs. O_NONBLOCK for nonblocking I/O]) - if test -f /usr/lib/NextStep/software_version; then - system=NEXTSTEP-`awk '/3/,/3/' /usr/lib/NextStep/software_version` - else - system=`uname -s`-`uname -r` - if test "$?" -ne 0 ; then - system=unknown - else - # Special check for weird MP-RAS system (uname returns weird - # results, and the version is kept in special file). - - if test -r /etc/.relid -a "X`uname -n`" = "X`uname -s`" ; then - system=MP-RAS-`awk '{print $3}' /etc/.relid'` - fi - if test "`uname -s`" = "AIX" ; then - system=AIX-`uname -v`.`uname -r` - fi - fi - fi - case $system in - # There used to be code here to use FIONBIO under AIX. However, it - # was reported that FIONBIO doesn't work under AIX 3.2.5. Since - # using O_NONBLOCK seems fine under AIX 4.*, I removed the FIONBIO - # code (JO, 5/31/97). - - OSF*) - AC_DEFINE(USE_FIONBIO) - AC_MSG_RESULT(FIONBIO) - ;; - SunOS-4*) - AC_DEFINE(USE_FIONBIO) - AC_MSG_RESULT(FIONBIO) - ;; - ULTRIX-4.*) - AC_DEFINE(USE_FIONBIO) - AC_MSG_RESULT(FIONBIO) - ;; - *) - AC_MSG_RESULT(O_NONBLOCK) - ;; - esac -]) - -#-------------------------------------------------------------------- -# SC_TIME_HANLDER -# -# Checks how the system deals with time.h, what time structures -# are used on the system, and what fields the structures have. -# -# Arguments: -# none -# -# Results: -# -# Defines some of the following vars: -# USE_DELTA_FOR_TZ -# HAVE_TM_GMTOFF -# HAVE_TM_TZADJ -# HAVE_TIMEZONE_VAR -# -#-------------------------------------------------------------------- - -AC_DEFUN(SC_TIME_HANDLER, [ - AC_CHECK_HEADERS(sys/time.h) - AC_HEADER_TIME - AC_STRUCT_TIMEZONE - - AC_CHECK_FUNCS(gmtime_r localtime_r) - - AC_MSG_CHECKING([tm_tzadj in struct tm]) - AC_CACHE_VAL(tcl_cv_member_tm_tzadj, - AC_TRY_COMPILE([#include <time.h>], [struct tm tm; tm.tm_tzadj;], - tcl_cv_member_tm_tzadj=yes, tcl_cv_member_tm_tzadj=no)) - AC_MSG_RESULT($tcl_cv_member_tm_tzadj) - if test $tcl_cv_member_tm_tzadj = yes ; then - AC_DEFINE(HAVE_TM_TZADJ) - fi - - AC_MSG_CHECKING([tm_gmtoff in struct tm]) - AC_CACHE_VAL(tcl_cv_member_tm_gmtoff, - AC_TRY_COMPILE([#include <time.h>], [struct tm tm; tm.tm_gmtoff;], - tcl_cv_member_tm_gmtoff=yes, tcl_cv_member_tm_gmtoff=no)) - AC_MSG_RESULT($tcl_cv_member_tm_gmtoff) - if test $tcl_cv_member_tm_gmtoff = yes ; then - AC_DEFINE(HAVE_TM_GMTOFF) - fi - - # - # Its important to include time.h in this check, as some systems - # (like convex) have timezone functions, etc. - # - AC_MSG_CHECKING([long timezone variable]) - AC_CACHE_VAL(tcl_cv_var_timezone, - AC_TRY_COMPILE([#include <time.h>], - [extern long timezone; - timezone += 1; - exit (0);], - tcl_cv_timezone_long=yes, tcl_cv_timezone_long=no)) - AC_MSG_RESULT($tcl_cv_timezone_long) - if test $tcl_cv_timezone_long = yes ; then - AC_DEFINE(HAVE_TIMEZONE_VAR) - else - # - # On some systems (eg IRIX 6.2), timezone is a time_t and not a long. - # - AC_MSG_CHECKING([time_t timezone variable]) - AC_CACHE_VAL(tcl_cv_timezone_time, - AC_TRY_COMPILE([#include <time.h>], - [extern time_t timezone; - timezone += 1; - exit (0);], - tcl_cv_timezone_time=yes, tcl_cv_timezone_time=no)) - AC_MSG_RESULT($tcl_cv_timezone_time) - if test $tcl_cv_timezone_time = yes ; then - AC_DEFINE(HAVE_TIMEZONE_VAR) - fi - fi -]) - -#-------------------------------------------------------------------- -# SC_BUGGY_STRTOD -# -# Under Solaris 2.4, strtod returns the wrong value for the -# terminating character under some conditions. Check for this -# and if the problem exists use a substitute procedure -# "fixstrtod" (provided by Tcl) that corrects the error. -# Also, on Compaq's Tru64 Unix 5.0, -# strtod(" ") returns 0.0 instead of a failure to convert. -# -# Arguments: -# none -# -# Results: -# -# Might defines some of the following vars: -# strtod (=fixstrtod) -# -#-------------------------------------------------------------------- - -AC_DEFUN(SC_BUGGY_STRTOD, [ - AC_CHECK_FUNC(strtod, tcl_strtod=1, tcl_strtod=0) - if test "$tcl_strtod" = 1; then - AC_MSG_CHECKING([for Solaris2.4/Tru64 strtod bugs]) - AC_CACHE_VAL(tcl_cv_strtod_buggy,[ - AC_TRY_RUN([ - extern double strtod(); - int main() { - char *infString="Inf", *nanString="NaN", *spaceString=" "; - char *term; - double value; - value = strtod(infString, &term); - if ((term != infString) && (term[-1] == 0)) { - exit(1); - } - value = strtod(nanString, &term); - if ((term != nanString) && (term[-1] == 0)) { - exit(1); - } - value = strtod(spaceString, &term); - if (term == (spaceString+1)) { - exit(1); - } - exit(0); - }], tcl_cv_strtod_buggy=1, tcl_cv_strtod_buggy=0, tcl_cv_strtod_buggy=0)]) - if test "$tcl_cv_strtod_buggy" = 1; then - AC_MSG_RESULT(ok) - else - AC_MSG_RESULT(buggy) - # upgrade to 2.5x egm 3/25/03 - AC_LIBOBJ(fixstrtod.o) - HAVE_COMPAT=true - AC_DEFINE(strtod, fixstrtod) - fi - fi -]) - -#-------------------------------------------------------------------- -# SC_TCL_LINK_LIBS -# -# Search for the libraries needed to link the Tcl shell. -# Things like the math library (-lm) and socket stuff (-lsocket vs. -# -lnsl) are dealt with here. -# -# Arguments: -# Requires the following vars to be set in the Makefile: -# DL_LIBS -# LIBS -# MATH_LIBS -# -# Results: -# -# Subst's the following var: -# TCL_LIBS -# MATH_LIBS -# -# Might append to the following vars: -# LIBS -# -# Might define the following vars: -# HAVE_NET_ERRNO_H -# -#-------------------------------------------------------------------- - -AC_DEFUN(SC_TCL_LINK_LIBS, [ - #-------------------------------------------------------------------- - # On a few very rare systems, all of the libm.a stuff is - # already in libc.a. Set compiler flags accordingly. - # Also, Linux requires the "ieee" library for math to work - # right (and it must appear before "-lm"). - #-------------------------------------------------------------------- - - AC_CHECK_FUNC(sin, MATH_LIBS="", MATH_LIBS="-lm") - AC_CHECK_LIB(ieee, main, [MATH_LIBS="-lieee $MATH_LIBS"]) - - #-------------------------------------------------------------------- - # Interactive UNIX requires -linet instead of -lsocket, plus it - # needs net/errno.h to define the socket-related error codes. - #-------------------------------------------------------------------- - - AC_CHECK_LIB(inet, main, [LIBS="$LIBS -linet"]) - AC_CHECK_HEADER(net/errno.h, [AC_DEFINE(HAVE_NET_ERRNO_H)]) - - #-------------------------------------------------------------------- - # Check for the existence of the -lsocket and -lnsl libraries. - # The order here is important, so that they end up in the right - # order in the command line generated by make. Here are some - # special considerations: - # 1. Use "connect" and "accept" to check for -lsocket, and - # "gethostbyname" to check for -lnsl. - # 2. Use each function name only once: can't redo a check because - # autoconf caches the results of the last check and won't redo it. - # 3. Use -lnsl and -lsocket only if they supply procedures that - # aren't already present in the normal libraries. This is because - # IRIX 5.2 has libraries, but they aren't needed and they're - # bogus: they goof up name resolution if used. - # 4. On some SVR4 systems, can't use -lsocket without -lnsl too. - # To get around this problem, check for both libraries together - # if -lsocket doesn't work by itself. - #-------------------------------------------------------------------- - - tcl_checkBoth=0 - AC_CHECK_FUNC(connect, tcl_checkSocket=0, tcl_checkSocket=1) - if test "$tcl_checkSocket" = 1; then - AC_CHECK_FUNC(setsockopt, , [AC_CHECK_LIB(socket, setsockopt, - LIBS="$LIBS -lsocket", tcl_checkBoth=1)]) - fi - if test "$tcl_checkBoth" = 1; then - tk_oldLibs=$LIBS - LIBS="$LIBS -lsocket -lnsl" - AC_CHECK_FUNC(accept, tcl_checkNsl=0, [LIBS=$tk_oldLibs]) - fi - AC_CHECK_FUNC(gethostbyname, , [AC_CHECK_LIB(nsl, gethostbyname, - [LIBS="$LIBS -lnsl"])]) - - # Don't perform the eval of the libraries here because DL_LIBS - # won't be set until we call SC_CONFIG_CFLAGS - - TCL_LIBS='${DL_LIBS} ${LIBS} ${MATH_LIBS}' - AC_SUBST(TCL_LIBS) - AC_SUBST(MATH_LIBS) -]) - -#-------------------------------------------------------------------- -# SC_TCL_EARLY_FLAGS -# -# Check for what flags are needed to be passed so the correct OS -# features are available. -# -# Arguments: -# None -# -# Results: -# -# Might define the following vars: -# _ISOC99_SOURCE -# _LARGEFILE64_SOURCE -# -#-------------------------------------------------------------------- - -AC_DEFUN(SC_TCL_EARLY_FLAG,[ - AC_CACHE_VAL([tcl_cv_flag_]translit($1,[A-Z],[a-z]), - AC_TRY_COMPILE([$2], $3, [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no, - AC_TRY_COMPILE([[#define ]$1[ 1 -]$2], $3, - [tcl_cv_flag_]translit($1,[A-Z],[a-z])=yes, - [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no))) - if test ["x${tcl_cv_flag_]translit($1,[A-Z],[a-z])[}" = "xyes"] ; then - AC_DEFINE($1) - tcl_flags="$tcl_flags $1" - fi]) - -AC_DEFUN(SC_TCL_EARLY_FLAGS,[ - AC_MSG_CHECKING([for required early compiler flags]) - tcl_flags="" - SC_TCL_EARLY_FLAG(_ISOC99_SOURCE,[#include <stdlib.h>], - [char *p = (char *)strtoll; char *q = (char *)strtoull;]) - SC_TCL_EARLY_FLAG(_LARGEFILE64_SOURCE,[#include <sys/stat.h>], - [struct stat64 buf; int i = stat64("/", &buf);]) - if test "x${tcl_flags}" = "x" ; then - AC_MSG_RESULT(none) - else - AC_MSG_RESULT(${tcl_flags}) - fi]) - -#-------------------------------------------------------------------- -# SC_TCL_64BIT_FLAGS -# -# Check for what is defined in the way of 64-bit features. -# -# Arguments: -# None -# -# Results: -# -# Might define the following vars: -# TCL_WIDE_INT_IS_LONG -# TCL_WIDE_INT_TYPE -# HAVE_STRUCT_DIRENT64 -# HAVE_STRUCT_STAT64 -# HAVE_TYPE_OFF64_T -# -#-------------------------------------------------------------------- - -AC_DEFUN(SC_TCL_64BIT_FLAGS, [ - AC_MSG_CHECKING([for 64-bit integer type]) - AC_CACHE_VAL(tcl_cv_type_64bit,[ - tcl_cv_type_64bit=none - # See if the compiler knows natively about __int64 - AC_TRY_COMPILE(,[__int64 value = (__int64) 0;], - tcl_type_64bit=__int64, tcl_type_64bit="long long") - # See if we should use long anyway Note that we substitute in the - # type that is our current guess for a 64-bit type inside this check - # program, so it should be modified only carefully... - AC_TRY_RUN([#include <unistd.h> - int main() {exit(!(sizeof(]${tcl_type_64bit}[) > sizeof(long)));} - ], tcl_cv_type_64bit=${tcl_type_64bit},:,:)]) - if test "${tcl_cv_type_64bit}" = none ; then - AC_DEFINE(TCL_WIDE_INT_IS_LONG) - AC_MSG_RESULT(using long) - else - AC_DEFINE_UNQUOTED(TCL_WIDE_INT_TYPE,${tcl_cv_type_64bit}) - AC_MSG_RESULT(${tcl_cv_type_64bit}) - - # Now check for auxiliary declarations - AC_MSG_CHECKING([for struct dirent64]) - AC_CACHE_VAL(tcl_cv_struct_dirent64,[ - AC_TRY_COMPILE([#include <sys/types.h> -#include <sys/dirent.h>],[struct dirent64 p;], - tcl_cv_struct_dirent64=yes,tcl_cv_struct_dirent64=no)]) - if test "x${tcl_cv_struct_dirent64}" = "xyes" ; then - AC_DEFINE(HAVE_STRUCT_DIRENT64) - fi - AC_MSG_RESULT(${tcl_cv_struct_dirent64}) - - AC_MSG_CHECKING([for struct stat64]) - AC_CACHE_VAL(tcl_cv_struct_stat64,[ - AC_TRY_COMPILE([#include <sys/stat.h>],[struct stat64 p; -], - tcl_cv_struct_stat64=yes,tcl_cv_struct_stat64=no)]) - if test "x${tcl_cv_struct_stat64}" = "xyes" ; then - AC_DEFINE(HAVE_STRUCT_STAT64) - fi - AC_MSG_RESULT(${tcl_cv_struct_stat64}) - - AC_MSG_CHECKING([for off64_t]) - AC_CACHE_VAL(tcl_cv_type_off64_t,[ - AC_TRY_COMPILE([#include <sys/types.h>],[off64_t offset; -], - tcl_cv_type_off64_t=yes,tcl_cv_type_off64_t=no)]) - if test "x${tcl_cv_type_off64_t}" = "xyes" ; then - AC_DEFINE(HAVE_TYPE_OFF64_T) - fi - AC_MSG_RESULT(${tcl_cv_type_off64_t}) - fi]) |