diff options
Diffstat (limited to 'zlib/contrib/dotzlib/DotZLib')
| -rw-r--r-- | zlib/contrib/dotzlib/DotZLib/AssemblyInfo.cs | 58 | ||||
| -rw-r--r-- | zlib/contrib/dotzlib/DotZLib/ChecksumImpl.cs | 202 | ||||
| -rw-r--r-- | zlib/contrib/dotzlib/DotZLib/CircularBuffer.cs | 83 | ||||
| -rw-r--r-- | zlib/contrib/dotzlib/DotZLib/CodecBase.cs | 198 | ||||
| -rw-r--r-- | zlib/contrib/dotzlib/DotZLib/Deflater.cs | 106 | ||||
| -rw-r--r-- | zlib/contrib/dotzlib/DotZLib/DotZLib.cs | 288 | ||||
| -rw-r--r-- | zlib/contrib/dotzlib/DotZLib/DotZLib.csproj | 141 | ||||
| -rw-r--r-- | zlib/contrib/dotzlib/DotZLib/GZipStream.cs | 301 | ||||
| -rw-r--r-- | zlib/contrib/dotzlib/DotZLib/Inflater.cs | 105 | ||||
| -rw-r--r-- | zlib/contrib/dotzlib/DotZLib/UnitTests.cs | 274 |
10 files changed, 0 insertions, 1756 deletions
diff --git a/zlib/contrib/dotzlib/DotZLib/AssemblyInfo.cs b/zlib/contrib/dotzlib/DotZLib/AssemblyInfo.cs deleted file mode 100644 index 0491bfc..0000000 --- a/zlib/contrib/dotzlib/DotZLib/AssemblyInfo.cs +++ /dev/null @@ -1,58 +0,0 @@ -using System.Reflection;
-using System.Runtime.CompilerServices;
-
-//
-// General Information about an assembly is controlled through the following
-// set of attributes. Change these attribute values to modify the information
-// associated with an assembly.
-//
-[assembly: AssemblyTitle("DotZLib")]
-[assembly: AssemblyDescription(".Net bindings for ZLib compression dll 1.2.x")]
-[assembly: AssemblyConfiguration("")]
-[assembly: AssemblyCompany("Henrik Ravn")]
-[assembly: AssemblyProduct("")]
-[assembly: AssemblyCopyright("(c) 2004 by Henrik Ravn")]
-[assembly: AssemblyTrademark("")]
-[assembly: AssemblyCulture("")]
-
-//
-// Version information for an assembly consists of the following four values:
-//
-// Major Version
-// Minor Version
-// Build Number
-// Revision
-//
-// You can specify all the values or you can default the Revision and Build Numbers
-// by using the '*' as shown below:
-
-[assembly: AssemblyVersion("1.0.*")]
-
-//
-// In order to sign your assembly you must specify a key to use. Refer to the
-// Microsoft .NET Framework documentation for more information on assembly signing.
-//
-// Use the attributes below to control which key is used for signing.
-//
-// Notes:
-// (*) If no key is specified, the assembly is not signed.
-// (*) KeyName refers to a key that has been installed in the Crypto Service
-// Provider (CSP) on your machine. KeyFile refers to a file which contains
-// a key.
-// (*) If the KeyFile and the KeyName values are both specified, the
-// following processing occurs:
-// (1) If the KeyName can be found in the CSP, that key is used.
-// (2) If the KeyName does not exist and the KeyFile does exist, the key
-// in the KeyFile is installed into the CSP and used.
-// (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
-// When specifying the KeyFile, the location of the KeyFile should be
-// relative to the project output directory which is
-// %Project Directory%\obj\<configuration>. For example, if your KeyFile is
-// located in the project directory, you would specify the AssemblyKeyFile
-// attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
-// (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
-// documentation for more information on this.
-//
-[assembly: AssemblyDelaySign(false)]
-[assembly: AssemblyKeyFile("")]
-[assembly: AssemblyKeyName("")]
diff --git a/zlib/contrib/dotzlib/DotZLib/ChecksumImpl.cs b/zlib/contrib/dotzlib/DotZLib/ChecksumImpl.cs deleted file mode 100644 index 788b2fc..0000000 --- a/zlib/contrib/dotzlib/DotZLib/ChecksumImpl.cs +++ /dev/null @@ -1,202 +0,0 @@ -//
-// © Copyright Henrik Ravn 2004
-//
-// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
-// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
-//
-
-using System;
-using System.Runtime.InteropServices;
-using System.Text;
-
-
-namespace DotZLib
-{
- #region ChecksumGeneratorBase
- /// <summary>
- /// Implements the common functionality needed for all <see cref="ChecksumGenerator"/>s
- /// </summary>
- /// <example></example>
- public abstract class ChecksumGeneratorBase : ChecksumGenerator
- {
- /// <summary>
- /// The value of the current checksum
- /// </summary>
- protected uint _current;
-
- /// <summary>
- /// Initializes a new instance of the checksum generator base - the current checksum is
- /// set to zero
- /// </summary>
- public ChecksumGeneratorBase()
- {
- _current = 0;
- }
-
- /// <summary>
- /// Initializes a new instance of the checksum generator basewith a specified value
- /// </summary>
- /// <param name="initialValue">The value to set the current checksum to</param>
- public ChecksumGeneratorBase(uint initialValue)
- {
- _current = initialValue;
- }
-
- /// <summary>
- /// Resets the current checksum to zero
- /// </summary>
- public void Reset() { _current = 0; }
-
- /// <summary>
- /// Gets the current checksum value
- /// </summary>
- public uint Value { get { return _current; } }
-
- /// <summary>
- /// Updates the current checksum with part of an array of bytes
- /// </summary>
- /// <param name="data">The data to update the checksum with</param>
- /// <param name="offset">Where in <c>data</c> to start updating</param>
- /// <param name="count">The number of bytes from <c>data</c> to use</param>
- /// <exception cref="ArgumentException">The sum of offset and count is larger than the length of <c>data</c></exception>
- /// <exception cref="NullReferenceException"><c>data</c> is a null reference</exception>
- /// <exception cref="ArgumentOutOfRangeException">Offset or count is negative.</exception>
- /// <remarks>All the other <c>Update</c> methods are implmeneted in terms of this one.
- /// This is therefore the only method a derived class has to implement</remarks>
- public abstract void Update(byte[] data, int offset, int count);
-
- /// <summary>
- /// Updates the current checksum with an array of bytes.
- /// </summary>
- /// <param name="data">The data to update the checksum with</param>
- public void Update(byte[] data)
- {
- Update(data, 0, data.Length);
- }
-
- /// <summary>
- /// Updates the current checksum with the data from a string
- /// </summary>
- /// <param name="data">The string to update the checksum with</param>
- /// <remarks>The characters in the string are converted by the UTF-8 encoding</remarks>
- public void Update(string data)
- {
- Update(Encoding.UTF8.GetBytes(data));
- }
-
- /// <summary>
- /// Updates the current checksum with the data from a string, using a specific encoding
- /// </summary>
- /// <param name="data">The string to update the checksum with</param>
- /// <param name="encoding">The encoding to use</param>
- public void Update(string data, Encoding encoding)
- {
- Update(encoding.GetBytes(data));
- }
-
- }
- #endregion
-
- #region CRC32
- /// <summary>
- /// Implements a CRC32 checksum generator
- /// </summary>
- public sealed class CRC32Checksum : ChecksumGeneratorBase
- {
- #region DLL imports
-
- [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
- private static extern uint crc32(uint crc, int data, uint length);
-
- #endregion
-
- /// <summary>
- /// Initializes a new instance of the CRC32 checksum generator
- /// </summary>
- public CRC32Checksum() : base() {}
-
- /// <summary>
- /// Initializes a new instance of the CRC32 checksum generator with a specified value
- /// </summary>
- /// <param name="initialValue">The value to set the current checksum to</param>
- public CRC32Checksum(uint initialValue) : base(initialValue) {}
-
- /// <summary>
- /// Updates the current checksum with part of an array of bytes
- /// </summary>
- /// <param name="data">The data to update the checksum with</param>
- /// <param name="offset">Where in <c>data</c> to start updating</param>
- /// <param name="count">The number of bytes from <c>data</c> to use</param>
- /// <exception cref="ArgumentException">The sum of offset and count is larger than the length of <c>data</c></exception>
- /// <exception cref="NullReferenceException"><c>data</c> is a null reference</exception>
- /// <exception cref="ArgumentOutOfRangeException">Offset or count is negative.</exception>
- public override void Update(byte[] data, int offset, int count)
- {
- if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
- if ((offset+count) > data.Length) throw new ArgumentException();
- GCHandle hData = GCHandle.Alloc(data, GCHandleType.Pinned);
- try
- {
- _current = crc32(_current, hData.AddrOfPinnedObject().ToInt32()+offset, (uint)count);
- }
- finally
- {
- hData.Free();
- }
- }
-
- }
- #endregion
-
- #region Adler
- /// <summary>
- /// Implements a checksum generator that computes the Adler checksum on data
- /// </summary>
- public sealed class AdlerChecksum : ChecksumGeneratorBase
- {
- #region DLL imports
-
- [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
- private static extern uint adler32(uint adler, int data, uint length);
-
- #endregion
-
- /// <summary>
- /// Initializes a new instance of the Adler checksum generator
- /// </summary>
- public AdlerChecksum() : base() {}
-
- /// <summary>
- /// Initializes a new instance of the Adler checksum generator with a specified value
- /// </summary>
- /// <param name="initialValue">The value to set the current checksum to</param>
- public AdlerChecksum(uint initialValue) : base(initialValue) {}
-
- /// <summary>
- /// Updates the current checksum with part of an array of bytes
- /// </summary>
- /// <param name="data">The data to update the checksum with</param>
- /// <param name="offset">Where in <c>data</c> to start updating</param>
- /// <param name="count">The number of bytes from <c>data</c> to use</param>
- /// <exception cref="ArgumentException">The sum of offset and count is larger than the length of <c>data</c></exception>
- /// <exception cref="NullReferenceException"><c>data</c> is a null reference</exception>
- /// <exception cref="ArgumentOutOfRangeException">Offset or count is negative.</exception>
- public override void Update(byte[] data, int offset, int count)
- {
- if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
- if ((offset+count) > data.Length) throw new ArgumentException();
- GCHandle hData = GCHandle.Alloc(data, GCHandleType.Pinned);
- try
- {
- _current = adler32(_current, hData.AddrOfPinnedObject().ToInt32()+offset, (uint)count);
- }
- finally
- {
- hData.Free();
- }
- }
-
- }
- #endregion
-
-}
\ No newline at end of file diff --git a/zlib/contrib/dotzlib/DotZLib/CircularBuffer.cs b/zlib/contrib/dotzlib/DotZLib/CircularBuffer.cs deleted file mode 100644 index c1cab3a..0000000 --- a/zlib/contrib/dotzlib/DotZLib/CircularBuffer.cs +++ /dev/null @@ -1,83 +0,0 @@ -//
-// © Copyright Henrik Ravn 2004
-//
-// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
-// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
-//
-
-using System;
-using System.Diagnostics;
-
-namespace DotZLib
-{
-
- /// <summary>
- /// This class implements a circular buffer
- /// </summary>
- internal class CircularBuffer
- {
- #region Private data
- private int _capacity;
- private int _head;
- private int _tail;
- private int _size;
- private byte[] _buffer;
- #endregion
-
- public CircularBuffer(int capacity)
- {
- Debug.Assert( capacity > 0 );
- _buffer = new byte[capacity];
- _capacity = capacity;
- _head = 0;
- _tail = 0;
- _size = 0;
- }
-
- public int Size { get { return _size; } }
-
- public int Put(byte[] source, int offset, int count)
- {
- Debug.Assert( count > 0 );
- int trueCount = Math.Min(count, _capacity - Size);
- for (int i = 0; i < trueCount; ++i)
- _buffer[(_tail+i) % _capacity] = source[offset+i];
- _tail += trueCount;
- _tail %= _capacity;
- _size += trueCount;
- return trueCount;
- }
-
- public bool Put(byte b)
- {
- if (Size == _capacity) // no room
- return false;
- _buffer[_tail++] = b;
- _tail %= _capacity;
- ++_size;
- return true;
- }
-
- public int Get(byte[] destination, int offset, int count)
- {
- int trueCount = Math.Min(count,Size);
- for (int i = 0; i < trueCount; ++i)
- destination[offset + i] = _buffer[(_head+i) % _capacity];
- _head += trueCount;
- _head %= _capacity;
- _size -= trueCount;
- return trueCount;
- }
-
- public int Get()
- {
- if (Size == 0)
- return -1;
-
- int result = (int)_buffer[_head++ % _capacity];
- --_size;
- return result;
- }
-
- }
-}
diff --git a/zlib/contrib/dotzlib/DotZLib/CodecBase.cs b/zlib/contrib/dotzlib/DotZLib/CodecBase.cs deleted file mode 100644 index 42e6da3..0000000 --- a/zlib/contrib/dotzlib/DotZLib/CodecBase.cs +++ /dev/null @@ -1,198 +0,0 @@ -//
-// © Copyright Henrik Ravn 2004
-//
-// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
-// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
-//
-
-using System;
-using System.Runtime.InteropServices;
-
-namespace DotZLib
-{
- /// <summary>
- /// Implements the common functionality needed for all <see cref="Codec"/>s
- /// </summary>
- public abstract class CodecBase : Codec, IDisposable
- {
-
- #region Data members
-
- /// <summary>
- /// Instance of the internal zlib buffer structure that is
- /// passed to all functions in the zlib dll
- /// </summary>
- internal ZStream _ztream = new ZStream();
-
- /// <summary>
- /// True if the object instance has been disposed, false otherwise
- /// </summary>
- protected bool _isDisposed = false;
-
- /// <summary>
- /// The size of the internal buffers
- /// </summary>
- protected const int kBufferSize = 16384;
-
- private byte[] _outBuffer = new byte[kBufferSize];
- private byte[] _inBuffer = new byte[kBufferSize];
-
- private GCHandle _hInput;
- private GCHandle _hOutput;
-
- private uint _checksum = 0;
-
- #endregion
-
- /// <summary>
- /// Initializes a new instance of the <c>CodeBase</c> class.
- /// </summary>
- public CodecBase()
- {
- try
- {
- _hInput = GCHandle.Alloc(_inBuffer, GCHandleType.Pinned);
- _hOutput = GCHandle.Alloc(_outBuffer, GCHandleType.Pinned);
- }
- catch (Exception)
- {
- CleanUp(false);
- throw;
- }
- }
-
-
- #region Codec Members
-
- /// <summary>
- /// Occurs when more processed data are available.
- /// </summary>
- public event DataAvailableHandler DataAvailable;
-
- /// <summary>
- /// Fires the <see cref="DataAvailable"/> event
- /// </summary>
- protected void OnDataAvailable()
- {
- if (_ztream.total_out > 0)
- {
- if (DataAvailable != null)
- DataAvailable( _outBuffer, 0, (int)_ztream.total_out);
- resetOutput();
- }
- }
-
- /// <summary>
- /// Adds more data to the codec to be processed.
- /// </summary>
- /// <param name="data">Byte array containing the data to be added to the codec</param>
- /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
- public void Add(byte[] data)
- {
- Add(data,0,data.Length);
- }
-
- /// <summary>
- /// Adds more data to the codec to be processed.
- /// </summary>
- /// <param name="data">Byte array containing the data to be added to the codec</param>
- /// <param name="offset">The index of the first byte to add from <c>data</c></param>
- /// <param name="count">The number of bytes to add</param>
- /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
- /// <remarks>This must be implemented by a derived class</remarks>
- public abstract void Add(byte[] data, int offset, int count);
-
- /// <summary>
- /// Finishes up any pending data that needs to be processed and handled.
- /// </summary>
- /// <remarks>This must be implemented by a derived class</remarks>
- public abstract void Finish();
-
- /// <summary>
- /// Gets the checksum of the data that has been added so far
- /// </summary>
- public uint Checksum { get { return _checksum; } }
-
- #endregion
-
- #region Destructor & IDisposable stuff
-
- /// <summary>
- /// Destroys this instance
- /// </summary>
- ~CodecBase()
- {
- CleanUp(false);
- }
-
- /// <summary>
- /// Releases any unmanaged resources and calls the <see cref="CleanUp()"/> method of the derived class
- /// </summary>
- public void Dispose()
- {
- CleanUp(true);
- }
-
- /// <summary>
- /// Performs any codec specific cleanup
- /// </summary>
- /// <remarks>This must be implemented by a derived class</remarks>
- protected abstract void CleanUp();
-
- // performs the release of the handles and calls the dereived CleanUp()
- private void CleanUp(bool isDisposing)
- {
- if (!_isDisposed)
- {
- CleanUp();
- if (_hInput.IsAllocated)
- _hInput.Free();
- if (_hOutput.IsAllocated)
- _hOutput.Free();
-
- _isDisposed = true;
- }
- }
-
-
- #endregion
-
- #region Helper methods
-
- /// <summary>
- /// Copies a number of bytes to the internal codec buffer - ready for proccesing
- /// </summary>
- /// <param name="data">The byte array that contains the data to copy</param>
- /// <param name="startIndex">The index of the first byte to copy</param>
- /// <param name="count">The number of bytes to copy from <c>data</c></param>
- protected void copyInput(byte[] data, int startIndex, int count)
- {
- Array.Copy(data, startIndex, _inBuffer,0, count);
- _ztream.next_in = _hInput.AddrOfPinnedObject();
- _ztream.total_in = 0;
- _ztream.avail_in = (uint)count;
-
- }
-
- /// <summary>
- /// Resets the internal output buffers to a known state - ready for processing
- /// </summary>
- protected void resetOutput()
- {
- _ztream.total_out = 0;
- _ztream.avail_out = kBufferSize;
- _ztream.next_out = _hOutput.AddrOfPinnedObject();
- }
-
- /// <summary>
- /// Updates the running checksum property
- /// </summary>
- /// <param name="newSum">The new checksum value</param>
- protected void setChecksum(uint newSum)
- {
- _checksum = newSum;
- }
- #endregion
-
- }
-}
diff --git a/zlib/contrib/dotzlib/DotZLib/Deflater.cs b/zlib/contrib/dotzlib/DotZLib/Deflater.cs deleted file mode 100644 index c247792..0000000 --- a/zlib/contrib/dotzlib/DotZLib/Deflater.cs +++ /dev/null @@ -1,106 +0,0 @@ -//
-// © Copyright Henrik Ravn 2004
-//
-// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
-// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
-//
-
-using System;
-using System.Diagnostics;
-using System.Runtime.InteropServices;
-
-namespace DotZLib
-{
-
- /// <summary>
- /// Implements a data compressor, using the deflate algorithm in the ZLib dll
- /// </summary>
- public sealed class Deflater : CodecBase
- {
- #region Dll imports
- [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl, CharSet=CharSet.Ansi)]
- private static extern int deflateInit_(ref ZStream sz, int level, string vs, int size);
-
- [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
- private static extern int deflate(ref ZStream sz, int flush);
-
- [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
- private static extern int deflateReset(ref ZStream sz);
-
- [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
- private static extern int deflateEnd(ref ZStream sz);
- #endregion
-
- /// <summary>
- /// Constructs an new instance of the <c>Deflater</c>
- /// </summary>
- /// <param name="level">The compression level to use for this <c>Deflater</c></param>
- public Deflater(CompressLevel level) : base()
- {
- int retval = deflateInit_(ref _ztream, (int)level, Info.Version, Marshal.SizeOf(_ztream));
- if (retval != 0)
- throw new ZLibException(retval, "Could not initialize deflater");
-
- resetOutput();
- }
-
- /// <summary>
- /// Adds more data to the codec to be processed.
- /// </summary>
- /// <param name="data">Byte array containing the data to be added to the codec</param>
- /// <param name="offset">The index of the first byte to add from <c>data</c></param>
- /// <param name="count">The number of bytes to add</param>
- /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
- public override void Add(byte[] data, int offset, int count)
- {
- if (data == null) throw new ArgumentNullException();
- if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
- if ((offset+count) > data.Length) throw new ArgumentException();
-
- int total = count;
- int inputIndex = offset;
- int err = 0;
-
- while (err >= 0 && inputIndex < total)
- {
- copyInput(data, inputIndex, Math.Min(total - inputIndex, kBufferSize));
- while (err >= 0 && _ztream.avail_in > 0)
- {
- err = deflate(ref _ztream, (int)FlushTypes.None);
- if (err == 0)
- while (_ztream.avail_out == 0)
- {
- OnDataAvailable();
- err = deflate(ref _ztream, (int)FlushTypes.None);
- }
- inputIndex += (int)_ztream.total_in;
- }
- }
- setChecksum( _ztream.adler );
- }
-
-
- /// <summary>
- /// Finishes up any pending data that needs to be processed and handled.
- /// </summary>
- public override void Finish()
- {
- int err;
- do
- {
- err = deflate(ref _ztream, (int)FlushTypes.Finish);
- OnDataAvailable();
- }
- while (err == 0);
- setChecksum( _ztream.adler );
- deflateReset(ref _ztream);
- resetOutput();
- }
-
- /// <summary>
- /// Closes the internal zlib deflate stream
- /// </summary>
- protected override void CleanUp() { deflateEnd(ref _ztream); }
-
- }
-}
diff --git a/zlib/contrib/dotzlib/DotZLib/DotZLib.cs b/zlib/contrib/dotzlib/DotZLib/DotZLib.cs deleted file mode 100644 index be184b4..0000000 --- a/zlib/contrib/dotzlib/DotZLib/DotZLib.cs +++ /dev/null @@ -1,288 +0,0 @@ -//
-// © Copyright Henrik Ravn 2004
-//
-// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
-// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
-//
-
-using System;
-using System.IO;
-using System.Runtime.InteropServices;
-using System.Text;
-
-
-namespace DotZLib
-{
-
- #region Internal types
-
- /// <summary>
- /// Defines constants for the various flush types used with zlib
- /// </summary>
- internal enum FlushTypes
- {
- None, Partial, Sync, Full, Finish, Block
- }
-
- #region ZStream structure
- // internal mapping of the zlib zstream structure for marshalling
- [StructLayoutAttribute(LayoutKind.Sequential, Pack=4, Size=0, CharSet=CharSet.Ansi)]
- internal struct ZStream
- {
- public IntPtr next_in;
- public uint avail_in;
- public uint total_in;
-
- public IntPtr next_out;
- public uint avail_out;
- public uint total_out;
-
- [MarshalAs(UnmanagedType.LPStr)]
- string msg;
- uint state;
-
- uint zalloc;
- uint zfree;
- uint opaque;
-
- int data_type;
- public uint adler;
- uint reserved;
- }
-
- #endregion
-
- #endregion
-
- #region Public enums
- /// <summary>
- /// Defines constants for the available compression levels in zlib
- /// </summary>
- public enum CompressLevel : int
- {
- /// <summary>
- /// The default compression level with a reasonable compromise between compression and speed
- /// </summary>
- Default = -1,
- /// <summary>
- /// No compression at all. The data are passed straight through.
- /// </summary>
- None = 0,
- /// <summary>
- /// The maximum compression rate available.
- /// </summary>
- Best = 9,
- /// <summary>
- /// The fastest available compression level.
- /// </summary>
- Fastest = 1
- }
- #endregion
-
- #region Exception classes
- /// <summary>
- /// The exception that is thrown when an error occurs on the zlib dll
- /// </summary>
- public class ZLibException : ApplicationException
- {
- /// <summary>
- /// Initializes a new instance of the <see cref="ZLibException"/> class with a specified
- /// error message and error code
- /// </summary>
- /// <param name="errorCode">The zlib error code that caused the exception</param>
- /// <param name="msg">A message that (hopefully) describes the error</param>
- public ZLibException(int errorCode, string msg) : base(String.Format("ZLib error {0} {1}", errorCode, msg))
- {
- }
-
- /// <summary>
- /// Initializes a new instance of the <see cref="ZLibException"/> class with a specified
- /// error code
- /// </summary>
- /// <param name="errorCode">The zlib error code that caused the exception</param>
- public ZLibException(int errorCode) : base(String.Format("ZLib error {0}", errorCode))
- {
- }
- }
- #endregion
-
- #region Interfaces
-
- /// <summary>
- /// Declares methods and properties that enables a running checksum to be calculated
- /// </summary>
- public interface ChecksumGenerator
- {
- /// <summary>
- /// Gets the current value of the checksum
- /// </summary>
- uint Value { get; }
-
- /// <summary>
- /// Clears the current checksum to 0
- /// </summary>
- void Reset();
-
- /// <summary>
- /// Updates the current checksum with an array of bytes
- /// </summary>
- /// <param name="data">The data to update the checksum with</param>
- void Update(byte[] data);
-
- /// <summary>
- /// Updates the current checksum with part of an array of bytes
- /// </summary>
- /// <param name="data">The data to update the checksum with</param>
- /// <param name="offset">Where in <c>data</c> to start updating</param>
- /// <param name="count">The number of bytes from <c>data</c> to use</param>
- /// <exception cref="ArgumentException">The sum of offset and count is larger than the length of <c>data</c></exception>
- /// <exception cref="ArgumentNullException"><c>data</c> is a null reference</exception>
- /// <exception cref="ArgumentOutOfRangeException">Offset or count is negative.</exception>
- void Update(byte[] data, int offset, int count);
-
- /// <summary>
- /// Updates the current checksum with the data from a string
- /// </summary>
- /// <param name="data">The string to update the checksum with</param>
- /// <remarks>The characters in the string are converted by the UTF-8 encoding</remarks>
- void Update(string data);
-
- /// <summary>
- /// Updates the current checksum with the data from a string, using a specific encoding
- /// </summary>
- /// <param name="data">The string to update the checksum with</param>
- /// <param name="encoding">The encoding to use</param>
- void Update(string data, Encoding encoding);
- }
-
-
- /// <summary>
- /// Represents the method that will be called from a codec when new data
- /// are available.
- /// </summary>
- /// <paramref name="data">The byte array containing the processed data</paramref>
- /// <paramref name="startIndex">The index of the first processed byte in <c>data</c></paramref>
- /// <paramref name="count">The number of processed bytes available</paramref>
- /// <remarks>On return from this method, the data may be overwritten, so grab it while you can.
- /// You cannot assume that startIndex will be zero.
- /// </remarks>
- public delegate void DataAvailableHandler(byte[] data, int startIndex, int count);
-
- /// <summary>
- /// Declares methods and events for implementing compressors/decompressors
- /// </summary>
- public interface Codec
- {
- /// <summary>
- /// Occurs when more processed data are available.
- /// </summary>
- event DataAvailableHandler DataAvailable;
-
- /// <summary>
- /// Adds more data to the codec to be processed.
- /// </summary>
- /// <param name="data">Byte array containing the data to be added to the codec</param>
- /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
- void Add(byte[] data);
-
- /// <summary>
- /// Adds more data to the codec to be processed.
- /// </summary>
- /// <param name="data">Byte array containing the data to be added to the codec</param>
- /// <param name="offset">The index of the first byte to add from <c>data</c></param>
- /// <param name="count">The number of bytes to add</param>
- /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
- void Add(byte[] data, int offset, int count);
-
- /// <summary>
- /// Finishes up any pending data that needs to be processed and handled.
- /// </summary>
- void Finish();
-
- /// <summary>
- /// Gets the checksum of the data that has been added so far
- /// </summary>
- uint Checksum { get; }
-
-
- }
-
- #endregion
-
- #region Classes
- /// <summary>
- /// Encapsulates general information about the ZLib library
- /// </summary>
- public class Info
- {
- #region DLL imports
- [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
- private static extern uint zlibCompileFlags();
-
- [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
- private static extern string zlibVersion();
- #endregion
-
- #region Private stuff
- private uint _flags;
-
- // helper function that unpacks a bitsize mask
- private static int bitSize(uint bits)
- {
- switch (bits)
- {
- case 0: return 16;
- case 1: return 32;
- case 2: return 64;
- }
- return -1;
- }
- #endregion
-
- /// <summary>
- /// Constructs an instance of the <c>Info</c> class.
- /// </summary>
- public Info()
- {
- _flags = zlibCompileFlags();
- }
-
- /// <summary>
- /// True if the library is compiled with debug info
- /// </summary>
- public bool HasDebugInfo { get { return 0 != (_flags & 0x100); } }
-
- /// <summary>
- /// True if the library is compiled with assembly optimizations
- /// </summary>
- public bool UsesAssemblyCode { get { return 0 != (_flags & 0x200); } }
-
- /// <summary>
- /// Gets the size of the unsigned int that was compiled into Zlib
- /// </summary>
- public int SizeOfUInt { get { return bitSize(_flags & 3); } }
-
- /// <summary>
- /// Gets the size of the unsigned long that was compiled into Zlib
- /// </summary>
- public int SizeOfULong { get { return bitSize((_flags >> 2) & 3); } }
-
- /// <summary>
- /// Gets the size of the pointers that were compiled into Zlib
- /// </summary>
- public int SizeOfPointer { get { return bitSize((_flags >> 4) & 3); } }
-
- /// <summary>
- /// Gets the size of the z_off_t type that was compiled into Zlib
- /// </summary>
- public int SizeOfOffset { get { return bitSize((_flags >> 6) & 3); } }
-
- /// <summary>
- /// Gets the version of ZLib as a string, e.g. "1.2.1"
- /// </summary>
- public static string Version { get { return zlibVersion(); } }
- }
-
- #endregion
-
-}
diff --git a/zlib/contrib/dotzlib/DotZLib/DotZLib.csproj b/zlib/contrib/dotzlib/DotZLib/DotZLib.csproj deleted file mode 100644 index 71eeb85..0000000 --- a/zlib/contrib/dotzlib/DotZLib/DotZLib.csproj +++ /dev/null @@ -1,141 +0,0 @@ -<VisualStudioProject>
- <CSHARP
- ProjectType = "Local"
- ProductVersion = "7.10.3077"
- SchemaVersion = "2.0"
- ProjectGuid = "{BB1EE0B1-1808-46CB-B786-949D91117FC5}"
- >
- <Build>
- <Settings
- ApplicationIcon = ""
- AssemblyKeyContainerName = ""
- AssemblyName = "DotZLib"
- AssemblyOriginatorKeyFile = ""
- DefaultClientScript = "JScript"
- DefaultHTMLPageLayout = "Grid"
- DefaultTargetSchema = "IE50"
- DelaySign = "false"
- OutputType = "Library"
- PreBuildEvent = ""
- PostBuildEvent = ""
- RootNamespace = "DotZLib"
- RunPostBuildEvent = "OnBuildSuccess"
- StartupObject = ""
- >
- <Config
- Name = "Debug"
- AllowUnsafeBlocks = "false"
- BaseAddress = "285212672"
- CheckForOverflowUnderflow = "false"
- ConfigurationOverrideFile = ""
- DefineConstants = "DEBUG;TRACE"
- DocumentationFile = "docs\DotZLib.xml"
- DebugSymbols = "true"
- FileAlignment = "4096"
- IncrementalBuild = "false"
- NoStdLib = "false"
- NoWarn = "1591"
- Optimize = "false"
- OutputPath = "bin\Debug\"
- RegisterForComInterop = "false"
- RemoveIntegerChecks = "false"
- TreatWarningsAsErrors = "false"
- WarningLevel = "4"
- />
- <Config
- Name = "Release"
- AllowUnsafeBlocks = "false"
- BaseAddress = "285212672"
- CheckForOverflowUnderflow = "false"
- ConfigurationOverrideFile = ""
- DefineConstants = "TRACE"
- DocumentationFile = "docs\DotZLib.xml"
- DebugSymbols = "false"
- FileAlignment = "4096"
- IncrementalBuild = "false"
- NoStdLib = "false"
- NoWarn = ""
- Optimize = "true"
- OutputPath = "bin\Release\"
- RegisterForComInterop = "false"
- RemoveIntegerChecks = "false"
- TreatWarningsAsErrors = "false"
- WarningLevel = "4"
- />
- </Settings>
- <References>
- <Reference
- Name = "System"
- AssemblyName = "System"
- HintPath = "C:\WINNT\Microsoft.NET\Framework\v1.1.4322\System.dll"
- />
- <Reference
- Name = "System.Data"
- AssemblyName = "System.Data"
- HintPath = "C:\WINNT\Microsoft.NET\Framework\v1.1.4322\System.Data.dll"
- />
- <Reference
- Name = "System.XML"
- AssemblyName = "System.Xml"
- HintPath = "C:\WINNT\Microsoft.NET\Framework\v1.1.4322\System.XML.dll"
- />
- <Reference
- Name = "nunit.framework"
- AssemblyName = "nunit.framework"
- HintPath = "E:\apps\NUnit V2.1\\bin\nunit.framework.dll"
- AssemblyFolderKey = "hklm\dn\nunit.framework"
- />
- </References>
- </Build>
- <Files>
- <Include>
- <File
- RelPath = "AssemblyInfo.cs"
- SubType = "Code"
- BuildAction = "Compile"
- />
- <File
- RelPath = "ChecksumImpl.cs"
- SubType = "Code"
- BuildAction = "Compile"
- />
- <File
- RelPath = "CircularBuffer.cs"
- SubType = "Code"
- BuildAction = "Compile"
- />
- <File
- RelPath = "CodecBase.cs"
- SubType = "Code"
- BuildAction = "Compile"
- />
- <File
- RelPath = "Deflater.cs"
- SubType = "Code"
- BuildAction = "Compile"
- />
- <File
- RelPath = "DotZLib.cs"
- SubType = "Code"
- BuildAction = "Compile"
- />
- <File
- RelPath = "GZipStream.cs"
- SubType = "Code"
- BuildAction = "Compile"
- />
- <File
- RelPath = "Inflater.cs"
- SubType = "Code"
- BuildAction = "Compile"
- />
- <File
- RelPath = "UnitTests.cs"
- SubType = "Code"
- BuildAction = "Compile"
- />
- </Include>
- </Files>
- </CSHARP>
-</VisualStudioProject>
-
diff --git a/zlib/contrib/dotzlib/DotZLib/GZipStream.cs b/zlib/contrib/dotzlib/DotZLib/GZipStream.cs deleted file mode 100644 index b161300..0000000 --- a/zlib/contrib/dotzlib/DotZLib/GZipStream.cs +++ /dev/null @@ -1,301 +0,0 @@ -//
-// © Copyright Henrik Ravn 2004
-//
-// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
-// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
-//
-
-using System;
-using System.IO;
-using System.Runtime.InteropServices;
-
-namespace DotZLib
-{
- /// <summary>
- /// Implements a compressed <see cref="Stream"/>, in GZip (.gz) format.
- /// </summary>
- public class GZipStream : Stream, IDisposable
- {
- #region Dll Imports
- [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl, CharSet=CharSet.Ansi)]
- private static extern IntPtr gzopen(string name, string mode);
-
- [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
- private static extern int gzclose(IntPtr gzFile);
-
- [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
- private static extern int gzwrite(IntPtr gzFile, int data, int length);
-
- [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
- private static extern int gzread(IntPtr gzFile, int data, int length);
-
- [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
- private static extern int gzgetc(IntPtr gzFile);
-
- [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
- private static extern int gzputc(IntPtr gzFile, int c);
-
- #endregion
-
- #region Private data
- private IntPtr _gzFile;
- private bool _isDisposed = false;
- private bool _isWriting;
- #endregion
-
- #region Constructors
- /// <summary>
- /// Creates a new file as a writeable GZipStream
- /// </summary>
- /// <param name="fileName">The name of the compressed file to create</param>
- /// <param name="level">The compression level to use when adding data</param>
- /// <exception cref="ZLibException">If an error occurred in the internal zlib function</exception>
- public GZipStream(string fileName, CompressLevel level)
- {
- _isWriting = true;
- _gzFile = gzopen(fileName, String.Format("wb{0}", (int)level));
- if (_gzFile == IntPtr.Zero)
- throw new ZLibException(-1, "Could not open " + fileName);
- }
-
- /// <summary>
- /// Opens an existing file as a readable GZipStream
- /// </summary>
- /// <param name="fileName">The name of the file to open</param>
- /// <exception cref="ZLibException">If an error occurred in the internal zlib function</exception>
- public GZipStream(string fileName)
- {
- _isWriting = false;
- _gzFile = gzopen(fileName, "rb");
- if (_gzFile == IntPtr.Zero)
- throw new ZLibException(-1, "Could not open " + fileName);
-
- }
- #endregion
-
- #region Access properties
- /// <summary>
- /// Returns true of this stream can be read from, false otherwise
- /// </summary>
- public override bool CanRead
- {
- get
- {
- return !_isWriting;
- }
- }
-
-
- /// <summary>
- /// Returns false.
- /// </summary>
- public override bool CanSeek
- {
- get
- {
- return false;
- }
- }
-
- /// <summary>
- /// Returns true if this tsream is writeable, false otherwise
- /// </summary>
- public override bool CanWrite
- {
- get
- {
- return _isWriting;
- }
- }
- #endregion
-
- #region Destructor & IDispose stuff
-
- /// <summary>
- /// Destroys this instance
- /// </summary>
- ~GZipStream()
- {
- cleanUp(false);
- }
-
- /// <summary>
- /// Closes the external file handle
- /// </summary>
- public void Dispose()
- {
- cleanUp(true);
- }
-
- // Does the actual closing of the file handle.
- private void cleanUp(bool isDisposing)
- {
- if (!_isDisposed)
- {
- gzclose(_gzFile);
- _isDisposed = true;
- }
- }
- #endregion
-
- #region Basic reading and writing
- /// <summary>
- /// Attempts to read a number of bytes from the stream.
- /// </summary>
- /// <param name="buffer">The destination data buffer</param>
- /// <param name="offset">The index of the first destination byte in <c>buffer</c></param>
- /// <param name="count">The number of bytes requested</param>
- /// <returns>The number of bytes read</returns>
- /// <exception cref="ArgumentNullException">If <c>buffer</c> is null</exception>
- /// <exception cref="ArgumentOutOfRangeException">If <c>count</c> or <c>offset</c> are negative</exception>
- /// <exception cref="ArgumentException">If <c>offset</c> + <c>count</c> is > buffer.Length</exception>
- /// <exception cref="NotSupportedException">If this stream is not readable.</exception>
- /// <exception cref="ObjectDisposedException">If this stream has been disposed.</exception>
- public override int Read(byte[] buffer, int offset, int count)
- {
- if (!CanRead) throw new NotSupportedException();
- if (buffer == null) throw new ArgumentNullException();
- if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
- if ((offset+count) > buffer.Length) throw new ArgumentException();
- if (_isDisposed) throw new ObjectDisposedException("GZipStream");
-
- GCHandle h = GCHandle.Alloc(buffer, GCHandleType.Pinned);
- int result;
- try
- {
- result = gzread(_gzFile, h.AddrOfPinnedObject().ToInt32() + offset, count);
- if (result < 0)
- throw new IOException();
- }
- finally
- {
- h.Free();
- }
- return result;
- }
-
- /// <summary>
- /// Attempts to read a single byte from the stream.
- /// </summary>
- /// <returns>The byte that was read, or -1 in case of error or End-Of-File</returns>
- public override int ReadByte()
- {
- if (!CanRead) throw new NotSupportedException();
- if (_isDisposed) throw new ObjectDisposedException("GZipStream");
- return gzgetc(_gzFile);
- }
-
- /// <summary>
- /// Writes a number of bytes to the stream
- /// </summary>
- /// <param name="buffer"></param>
- /// <param name="offset"></param>
- /// <param name="count"></param>
- /// <exception cref="ArgumentNullException">If <c>buffer</c> is null</exception>
- /// <exception cref="ArgumentOutOfRangeException">If <c>count</c> or <c>offset</c> are negative</exception>
- /// <exception cref="ArgumentException">If <c>offset</c> + <c>count</c> is > buffer.Length</exception>
- /// <exception cref="NotSupportedException">If this stream is not writeable.</exception>
- /// <exception cref="ObjectDisposedException">If this stream has been disposed.</exception>
- public override void Write(byte[] buffer, int offset, int count)
- {
- if (!CanWrite) throw new NotSupportedException();
- if (buffer == null) throw new ArgumentNullException();
- if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
- if ((offset+count) > buffer.Length) throw new ArgumentException();
- if (_isDisposed) throw new ObjectDisposedException("GZipStream");
-
- GCHandle h = GCHandle.Alloc(buffer, GCHandleType.Pinned);
- try
- {
- int result = gzwrite(_gzFile, h.AddrOfPinnedObject().ToInt32() + offset, count);
- if (result < 0)
- throw new IOException();
- }
- finally
- {
- h.Free();
- }
- }
-
- /// <summary>
- /// Writes a single byte to the stream
- /// </summary>
- /// <param name="value">The byte to add to the stream.</param>
- /// <exception cref="NotSupportedException">If this stream is not writeable.</exception>
- /// <exception cref="ObjectDisposedException">If this stream has been disposed.</exception>
- public override void WriteByte(byte value)
- {
- if (!CanWrite) throw new NotSupportedException();
- if (_isDisposed) throw new ObjectDisposedException("GZipStream");
-
- int result = gzputc(_gzFile, (int)value);
- if (result < 0)
- throw new IOException();
- }
- #endregion
-
- #region Position & length stuff
- /// <summary>
- /// Not supported.
- /// </summary>
- /// <param name="value"></param>
- /// <exception cref="NotSupportedException">Always thrown</exception>
- public override void SetLength(long value)
- {
- throw new NotSupportedException();
- }
-
- /// <summary>
- /// Not suppported.
- /// </summary>
- /// <param name="offset"></param>
- /// <param name="origin"></param>
- /// <returns></returns>
- /// <exception cref="NotSupportedException">Always thrown</exception>
- public override long Seek(long offset, SeekOrigin origin)
- {
- throw new NotSupportedException();
- }
-
- /// <summary>
- /// Flushes the <c>GZipStream</c>.
- /// </summary>
- /// <remarks>In this implementation, this method does nothing. This is because excessive
- /// flushing may degrade the achievable compression rates.</remarks>
- public override void Flush()
- {
- // left empty on purpose
- }
-
- /// <summary>
- /// Gets/sets the current position in the <c>GZipStream</c>. Not suppported.
- /// </summary>
- /// <remarks>In this implementation this property is not supported</remarks>
- /// <exception cref="NotSupportedException">Always thrown</exception>
- public override long Position
- {
- get
- {
- throw new NotSupportedException();
- }
- set
- {
- throw new NotSupportedException();
- }
- }
-
- /// <summary>
- /// Gets the size of the stream. Not suppported.
- /// </summary>
- /// <remarks>In this implementation this property is not supported</remarks>
- /// <exception cref="NotSupportedException">Always thrown</exception>
- public override long Length
- {
- get
- {
- throw new NotSupportedException();
- }
- }
- #endregion
- }
-}
diff --git a/zlib/contrib/dotzlib/DotZLib/Inflater.cs b/zlib/contrib/dotzlib/DotZLib/Inflater.cs deleted file mode 100644 index 8ed5451..0000000 --- a/zlib/contrib/dotzlib/DotZLib/Inflater.cs +++ /dev/null @@ -1,105 +0,0 @@ -//
-// © Copyright Henrik Ravn 2004
-//
-// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
-// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
-//
-
-using System;
-using System.Diagnostics;
-using System.Runtime.InteropServices;
-
-namespace DotZLib
-{
-
- /// <summary>
- /// Implements a data decompressor, using the inflate algorithm in the ZLib dll
- /// </summary>
- public class Inflater : CodecBase
- {
- #region Dll imports
- [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl, CharSet=CharSet.Ansi)]
- private static extern int inflateInit_(ref ZStream sz, string vs, int size);
-
- [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
- private static extern int inflate(ref ZStream sz, int flush);
-
- [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
- private static extern int inflateReset(ref ZStream sz);
-
- [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
- private static extern int inflateEnd(ref ZStream sz);
- #endregion
-
- /// <summary>
- /// Constructs an new instance of the <c>Inflater</c>
- /// </summary>
- public Inflater() : base()
- {
- int retval = inflateInit_(ref _ztream, Info.Version, Marshal.SizeOf(_ztream));
- if (retval != 0)
- throw new ZLibException(retval, "Could not initialize inflater");
-
- resetOutput();
- }
-
-
- /// <summary>
- /// Adds more data to the codec to be processed.
- /// </summary>
- /// <param name="data">Byte array containing the data to be added to the codec</param>
- /// <param name="offset">The index of the first byte to add from <c>data</c></param>
- /// <param name="count">The number of bytes to add</param>
- /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
- public override void Add(byte[] data, int offset, int count)
- {
- if (data == null) throw new ArgumentNullException();
- if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
- if ((offset+count) > data.Length) throw new ArgumentException();
-
- int total = count;
- int inputIndex = offset;
- int err = 0;
-
- while (err >= 0 && inputIndex < total)
- {
- copyInput(data, inputIndex, Math.Min(total - inputIndex, kBufferSize));
- err = inflate(ref _ztream, (int)FlushTypes.None);
- if (err == 0)
- while (_ztream.avail_out == 0)
- {
- OnDataAvailable();
- err = inflate(ref _ztream, (int)FlushTypes.None);
- }
-
- inputIndex += (int)_ztream.total_in;
- }
- setChecksum( _ztream.adler );
- }
-
-
- /// <summary>
- /// Finishes up any pending data that needs to be processed and handled.
- /// </summary>
- public override void Finish()
- {
- int err;
- do
- {
- err = inflate(ref _ztream, (int)FlushTypes.Finish);
- OnDataAvailable();
- }
- while (err == 0);
- setChecksum( _ztream.adler );
- inflateReset(ref _ztream);
- resetOutput();
- }
-
- /// <summary>
- /// Closes the internal zlib inflate stream
- /// </summary>
- protected override void CleanUp() { inflateEnd(ref _ztream); }
-
-
- }
-}
diff --git a/zlib/contrib/dotzlib/DotZLib/UnitTests.cs b/zlib/contrib/dotzlib/DotZLib/UnitTests.cs deleted file mode 100644 index b273d54..0000000 --- a/zlib/contrib/dotzlib/DotZLib/UnitTests.cs +++ /dev/null @@ -1,274 +0,0 @@ -//
-// © Copyright Henrik Ravn 2004
-//
-// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
-// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
-//
-
-using System;
-using System.Collections;
-using System.IO;
-
-// uncomment the define below to include unit tests
-//#define nunit
-#if nunit
-using NUnit.Framework;
-
-// Unit tests for the DotZLib class library
-// ----------------------------------------
-//
-// Use this with NUnit 2 from http://www.nunit.org
-//
-
-namespace DotZLibTests
-{
- using DotZLib;
-
- // helper methods
- internal class Utils
- {
- public static bool byteArrEqual( byte[] lhs, byte[] rhs )
- {
- if (lhs.Length != rhs.Length)
- return false;
- for (int i = lhs.Length-1; i >= 0; --i)
- if (lhs[i] != rhs[i])
- return false;
- return true;
- }
-
- }
-
-
- [TestFixture]
- public class CircBufferTests
- {
- #region Circular buffer tests
- [Test]
- public void SinglePutGet()
- {
- CircularBuffer buf = new CircularBuffer(10);
- Assert.AreEqual( 0, buf.Size );
- Assert.AreEqual( -1, buf.Get() );
-
- Assert.IsTrue(buf.Put( 1 ));
- Assert.AreEqual( 1, buf.Size );
- Assert.AreEqual( 1, buf.Get() );
- Assert.AreEqual( 0, buf.Size );
- Assert.AreEqual( -1, buf.Get() );
- }
-
- [Test]
- public void BlockPutGet()
- {
- CircularBuffer buf = new CircularBuffer(10);
- byte[] arr = {1,2,3,4,5,6,7,8,9,10};
- Assert.AreEqual( 10, buf.Put(arr,0,10) );
- Assert.AreEqual( 10, buf.Size );
- Assert.IsFalse( buf.Put(11) );
- Assert.AreEqual( 1, buf.Get() );
- Assert.IsTrue( buf.Put(11) );
-
- byte[] arr2 = (byte[])arr.Clone();
- Assert.AreEqual( 9, buf.Get(arr2,1,9) );
- Assert.IsTrue( Utils.byteArrEqual(arr,arr2) );
- }
-
- #endregion
- }
-
- [TestFixture]
- public class ChecksumTests
- {
- #region CRC32 Tests
- [Test]
- public void CRC32_Null()
- {
- CRC32Checksum crc32 = new CRC32Checksum();
- Assert.AreEqual( 0, crc32.Value );
-
- crc32 = new CRC32Checksum(1);
- Assert.AreEqual( 1, crc32.Value );
-
- crc32 = new CRC32Checksum(556);
- Assert.AreEqual( 556, crc32.Value );
- }
-
- [Test]
- public void CRC32_Data()
- {
- CRC32Checksum crc32 = new CRC32Checksum();
- byte[] data = { 1,2,3,4,5,6,7 };
- crc32.Update(data);
- Assert.AreEqual( 0x70e46888, crc32.Value );
-
- crc32 = new CRC32Checksum();
- crc32.Update("penguin");
- Assert.AreEqual( 0x0e5c1a120, crc32.Value );
-
- crc32 = new CRC32Checksum(1);
- crc32.Update("penguin");
- Assert.AreEqual(0x43b6aa94, crc32.Value);
-
- }
- #endregion
-
- #region Adler tests
-
- [Test]
- public void Adler_Null()
- {
- AdlerChecksum adler = new AdlerChecksum();
- Assert.AreEqual(0, adler.Value);
-
- adler = new AdlerChecksum(1);
- Assert.AreEqual( 1, adler.Value );
-
- adler = new AdlerChecksum(556);
- Assert.AreEqual( 556, adler.Value );
- }
-
- [Test]
- public void Adler_Data()
- {
- AdlerChecksum adler = new AdlerChecksum(1);
- byte[] data = { 1,2,3,4,5,6,7 };
- adler.Update(data);
- Assert.AreEqual( 0x5b001d, adler.Value );
-
- adler = new AdlerChecksum();
- adler.Update("penguin");
- Assert.AreEqual(0x0bcf02f6, adler.Value );
-
- adler = new AdlerChecksum(1);
- adler.Update("penguin");
- Assert.AreEqual(0x0bd602f7, adler.Value);
-
- }
- #endregion
- }
-
- [TestFixture]
- public class InfoTests
- {
- #region Info tests
- [Test]
- public void Info_Version()
- {
- Info info = new Info();
- Assert.AreEqual("1.2.8", Info.Version);
- Assert.AreEqual(32, info.SizeOfUInt);
- Assert.AreEqual(32, info.SizeOfULong);
- Assert.AreEqual(32, info.SizeOfPointer);
- Assert.AreEqual(32, info.SizeOfOffset);
- }
- #endregion
- }
-
- [TestFixture]
- public class DeflateInflateTests
- {
- #region Deflate tests
- [Test]
- public void Deflate_Init()
- {
- using (Deflater def = new Deflater(CompressLevel.Default))
- {
- }
- }
-
- private ArrayList compressedData = new ArrayList();
- private uint adler1;
-
- private ArrayList uncompressedData = new ArrayList();
- private uint adler2;
-
- public void CDataAvail(byte[] data, int startIndex, int count)
- {
- for (int i = 0; i < count; ++i)
- compressedData.Add(data[i+startIndex]);
- }
-
- [Test]
- public void Deflate_Compress()
- {
- compressedData.Clear();
-
- byte[] testData = new byte[35000];
- for (int i = 0; i < testData.Length; ++i)
- testData[i] = 5;
-
- using (Deflater def = new Deflater((CompressLevel)5))
- {
- def.DataAvailable += new DataAvailableHandler(CDataAvail);
- def.Add(testData);
- def.Finish();
- adler1 = def.Checksum;
- }
- }
- #endregion
-
- #region Inflate tests
- [Test]
- public void Inflate_Init()
- {
- using (Inflater inf = new Inflater())
- {
- }
- }
-
- private void DDataAvail(byte[] data, int startIndex, int count)
- {
- for (int i = 0; i < count; ++i)
- uncompressedData.Add(data[i+startIndex]);
- }
-
- [Test]
- public void Inflate_Expand()
- {
- uncompressedData.Clear();
-
- using (Inflater inf = new Inflater())
- {
- inf.DataAvailable += new DataAvailableHandler(DDataAvail);
- inf.Add((byte[])compressedData.ToArray(typeof(byte)));
- inf.Finish();
- adler2 = inf.Checksum;
- }
- Assert.AreEqual( adler1, adler2 );
- }
- #endregion
- }
-
- [TestFixture]
- public class GZipStreamTests
- {
- #region GZipStream test
- [Test]
- public void GZipStream_WriteRead()
- {
- using (GZipStream gzOut = new GZipStream("gzstream.gz", CompressLevel.Best))
- {
- BinaryWriter writer = new BinaryWriter(gzOut);
- writer.Write("hi there");
- writer.Write(Math.PI);
- writer.Write(42);
- }
-
- using (GZipStream gzIn = new GZipStream("gzstream.gz"))
- {
- BinaryReader reader = new BinaryReader(gzIn);
- string s = reader.ReadString();
- Assert.AreEqual("hi there",s);
- double d = reader.ReadDouble();
- Assert.AreEqual(Math.PI, d);
- int i = reader.ReadInt32();
- Assert.AreEqual(42,i);
- }
-
- }
- #endregion
- }
-}
-
-#endif
|