From 60d692811c12788ed4468d5ff680633304e8f641 Mon Sep 17 00:00:00 2001 From: William Joye Date: Tue, 3 Jan 2017 16:52:18 -0500 Subject: Squashed 'tkimg/' content from commit cea82ed git-subtree-dir: tkimg git-subtree-split: cea82eda1ed1ef3c8f1e22135bf03c209d1704d4 --- ANNOUNCE | 103 + ChangeLog | 923 + Makefile.in | 195 + README | 246 + Reorganization.Notes.txt | 283 + aclocal.m4 | 6 + base/ChangeLog | 66 + base/Makefile.in | 508 + base/README | 68 + base/aclocal.m4 | 10 + base/configure | 12774 +++++++++++ base/configure.in | 176 + base/pkgIndex.tcl.in | 38 + base/tkimg.c | 219 + base/tkimg.decls | 96 + base/tkimg.h | 141 + base/tkimgConfig.sh.in | 57 + base/tkimgDecls.h | 226 + base/tkimgIO.c | 510 + base/tkimgPPB.c | 142 + base/tkimgStubInit.c | 55 + base/tkimgStubLib.c | 58 + base/tkimgUtils.c | 261 + bmp/ChangeLog | 30 + bmp/Makefile.in | 514 + bmp/README | 2 + bmp/aclocal.m4 | 10 + bmp/bmp.c | 858 + bmp/bmp.txt | 1034 + bmp/configure | 13478 +++++++++++ bmp/configure.in | 199 + bmp/tests/WizImg.bmp | Bin 0 -> 26410 bytes bmp/tests/all.tcl | 24 + bmp/tests/bmp.test | 53 + bmp/tests/bmp4r.bmp | Bin 0 -> 876 bytes bmp/tests/bmp8r.bmp | Bin 0 -> 2226 bytes bmp/tests/folder.bmp | Bin 0 -> 162 bytes bmp/tests/img.bmp | Bin 0 -> 1658 bytes changes | 335 + compat/dlfcn.h | 52 + compat/dllEntry.c | 61 + compat/libjpeg/Makefile.am | 134 + compat/libjpeg/Makefile.in | 1039 + compat/libjpeg/README | 375 + compat/libjpeg/aclocal.m4 | 10277 +++++++++ compat/libjpeg/ar-lib | 270 + compat/libjpeg/cderror.h | 134 + compat/libjpeg/cdjpeg.c | 181 + compat/libjpeg/cdjpeg.h | 187 + compat/libjpeg/change.log | 432 + compat/libjpeg/cjpeg.1 | 387 + compat/libjpeg/cjpeg.c | 664 + compat/libjpeg/ckconfig.c | 402 + compat/libjpeg/coderules.txt | 118 + compat/libjpeg/compile | 347 + compat/libjpeg/config.guess | 1421 ++ compat/libjpeg/config.sub | 1807 ++ compat/libjpeg/configure | 15877 +++++++++++++ compat/libjpeg/configure.ac | 365 + compat/libjpeg/depcomp | 791 + compat/libjpeg/djpeg.1 | 257 + compat/libjpeg/djpeg.c | 622 + compat/libjpeg/example.c | 433 + compat/libjpeg/filelist.txt | 215 + compat/libjpeg/install-sh | 501 + compat/libjpeg/install.txt | 1107 + compat/libjpeg/jaricom.c | 153 + compat/libjpeg/jcapimin.c | 288 + compat/libjpeg/jcapistd.c | 162 + compat/libjpeg/jcarith.c | 944 + compat/libjpeg/jccoefct.c | 454 + compat/libjpeg/jccolor.c | 604 + compat/libjpeg/jcdctmgr.c | 477 + compat/libjpeg/jchuff.c | 1573 ++ compat/libjpeg/jcinit.c | 84 + compat/libjpeg/jcmainct.c | 297 + compat/libjpeg/jcmarker.c | 719 + compat/libjpeg/jcmaster.c | 856 + compat/libjpeg/jcomapi.c | 106 + compat/libjpeg/jconfig.bcc | 48 + compat/libjpeg/jconfig.cfg | 59 + compat/libjpeg/jconfig.dj | 38 + compat/libjpeg/jconfig.mac | 43 + compat/libjpeg/jconfig.manx | 43 + compat/libjpeg/jconfig.mc6 | 52 + compat/libjpeg/jconfig.sas | 43 + compat/libjpeg/jconfig.st | 42 + compat/libjpeg/jconfig.txt | 171 + compat/libjpeg/jconfig.vc | 52 + compat/libjpeg/jconfig.vms | 37 + compat/libjpeg/jconfig.wat | 38 + compat/libjpeg/jcparam.c | 675 + compat/libjpeg/jcprepct.c | 358 + compat/libjpeg/jcsample.c | 545 + compat/libjpeg/jctrans.c | 385 + compat/libjpeg/jdapimin.c | 399 + compat/libjpeg/jdapistd.c | 276 + compat/libjpeg/jdarith.c | 796 + compat/libjpeg/jdatadst.c | 270 + compat/libjpeg/jdatasrc.c | 275 + compat/libjpeg/jdcoefct.c | 741 + compat/libjpeg/jdcolor.c | 725 + compat/libjpeg/jdct.h | 417 + compat/libjpeg/jddctmgr.c | 384 + compat/libjpeg/jdhuff.c | 1554 ++ compat/libjpeg/jdinput.c | 662 + compat/libjpeg/jdmainct.c | 513 + compat/libjpeg/jdmarker.c | 1511 ++ compat/libjpeg/jdmaster.c | 539 + compat/libjpeg/jdmerge.c | 445 + compat/libjpeg/jdpostct.c | 290 + compat/libjpeg/jdsample.c | 358 + compat/libjpeg/jdtrans.c | 140 + compat/libjpeg/jerror.c | 253 + compat/libjpeg/jerror.h | 304 + compat/libjpeg/jfdctflt.c | 176 + compat/libjpeg/jfdctfst.c | 232 + compat/libjpeg/jfdctint.c | 4409 ++++ compat/libjpeg/jidctflt.c | 238 + compat/libjpeg/jidctfst.c | 351 + compat/libjpeg/jidctint.c | 5239 +++++ compat/libjpeg/jinclude.h | 91 + compat/libjpeg/jmemansi.c | 167 + compat/libjpeg/jmemdos.c | 638 + compat/libjpeg/jmemdosa.asm | 379 + compat/libjpeg/jmemmac.c | 289 + compat/libjpeg/jmemmgr.c | 1119 + compat/libjpeg/jmemname.c | 276 + compat/libjpeg/jmemnobs.c | 109 + compat/libjpeg/jmemsys.h | 198 + compat/libjpeg/jmorecfg.h | 446 + compat/libjpeg/jpegint.h | 426 + compat/libjpeg/jpeglib.h | 1180 + compat/libjpeg/jpegtran.1 | 303 + compat/libjpeg/jpegtran.c | 577 + compat/libjpeg/jquant1.c | 857 + compat/libjpeg/jquant2.c | 1311 ++ compat/libjpeg/jutils.c | 227 + compat/libjpeg/jversion.h | 14 + compat/libjpeg/libjpeg.map | 4 + compat/libjpeg/libjpeg.txt | 3111 +++ compat/libjpeg/ltmain.sh | 11147 +++++++++ compat/libjpeg/makcjpeg.st | 36 + compat/libjpeg/makdjpeg.st | 36 + compat/libjpeg/makeadsw.vc6 | 77 + compat/libjpeg/makeasln.v10 | 33 + compat/libjpeg/makecdep.vc6 | 82 + compat/libjpeg/makecdsp.vc6 | 130 + compat/libjpeg/makecfil.v10 | 69 + compat/libjpeg/makecmak.vc6 | 159 + compat/libjpeg/makecvcx.v10 | 76 + compat/libjpeg/makeddep.vc6 | 82 + compat/libjpeg/makeddsp.vc6 | 130 + compat/libjpeg/makedfil.v10 | 69 + compat/libjpeg/makedmak.vc6 | 159 + compat/libjpeg/makedvcx.v10 | 76 + compat/libjpeg/makefile.ansi | 221 + compat/libjpeg/makefile.b32 | 243 + compat/libjpeg/makefile.bcc | 292 + compat/libjpeg/makefile.dj | 227 + compat/libjpeg/makefile.manx | 221 + compat/libjpeg/makefile.mc6 | 256 + compat/libjpeg/makefile.mms | 225 + compat/libjpeg/makefile.sas | 259 + compat/libjpeg/makefile.unix | 235 + compat/libjpeg/makefile.vc | 273 + compat/libjpeg/makefile.vms | 142 + compat/libjpeg/makefile.wat | 240 + compat/libjpeg/makejdep.vc6 | 423 + compat/libjpeg/makejdsp.vc6 | 285 + compat/libjpeg/makejdsw.vc6 | 29 + compat/libjpeg/makejfil.v10 | 186 + compat/libjpeg/makejmak.vc6 | 425 + compat/libjpeg/makejsln.v10 | 17 + compat/libjpeg/makejvcx.v10 | 112 + compat/libjpeg/makeproj.mac | 213 + compat/libjpeg/makerdep.vc6 | 6 + compat/libjpeg/makerdsp.vc6 | 78 + compat/libjpeg/makerfil.v10 | 30 + compat/libjpeg/makermak.vc6 | 110 + compat/libjpeg/makervcx.v10 | 62 + compat/libjpeg/maketdep.vc6 | 43 + compat/libjpeg/maketdsp.vc6 | 122 + compat/libjpeg/maketfil.v10 | 63 + compat/libjpeg/maketmak.vc6 | 131 + compat/libjpeg/maketvcx.v10 | 74 + compat/libjpeg/makewdep.vc6 | 6 + compat/libjpeg/makewdsp.vc6 | 78 + compat/libjpeg/makewfil.v10 | 30 + compat/libjpeg/makewmak.vc6 | 110 + compat/libjpeg/makewvcx.v10 | 62 + compat/libjpeg/makljpeg.st | 68 + compat/libjpeg/maktjpeg.st | 30 + compat/libjpeg/makvms.opt | 4 + compat/libjpeg/missing | 215 + compat/libjpeg/rdbmp.c | 480 + compat/libjpeg/rdcolmap.c | 253 + compat/libjpeg/rdgif.c | 38 + compat/libjpeg/rdjpgcom.1 | 63 + compat/libjpeg/rdjpgcom.c | 515 + compat/libjpeg/rdppm.c | 459 + compat/libjpeg/rdrle.c | 387 + compat/libjpeg/rdswitch.c | 367 + compat/libjpeg/rdtarga.c | 500 + compat/libjpeg/structure.txt | 942 + compat/libjpeg/testimg.bmp | Bin 0 -> 35050 bytes compat/libjpeg/testimg.jpg | Bin 0 -> 5764 bytes compat/libjpeg/testimg.ppm | 4 + compat/libjpeg/testimgp.jpg | Bin 0 -> 5645 bytes compat/libjpeg/testorig.jpg | Bin 0 -> 5770 bytes compat/libjpeg/testprog.jpg | Bin 0 -> 5655 bytes compat/libjpeg/transupp.c | 1763 ++ compat/libjpeg/transupp.h | 219 + compat/libjpeg/usage.txt | 687 + compat/libjpeg/wizard.txt | 211 + compat/libjpeg/wrbmp.c | 442 + compat/libjpeg/wrgif.c | 400 + compat/libjpeg/wrjpgcom.1 | 103 + compat/libjpeg/wrjpgcom.c | 599 + compat/libjpeg/wrppm.c | 269 + compat/libjpeg/wrrle.c | 305 + compat/libjpeg/wrtarga.c | 254 + compat/libpng/ANNOUNCE | 60 + compat/libpng/CHANGES | 5494 +++++ compat/libpng/CMakeLists.txt | 374 + compat/libpng/INSTALL | 407 + compat/libpng/LICENSE | 112 + compat/libpng/Makefile.am | 361 + compat/libpng/Makefile.in | 2211 ++ compat/libpng/README | 215 + compat/libpng/TODO | 29 + compat/libpng/aclocal.m4 | 1213 + compat/libpng/arm/arm_init.c | 134 + compat/libpng/arm/filter_neon.S | 253 + compat/libpng/arm/filter_neon_intrinsics.c | 373 + compat/libpng/autogen.sh | 225 + compat/libpng/compile | 347 + compat/libpng/config.guess | 1421 ++ compat/libpng/config.h.in | 108 + compat/libpng/config.sub | 1807 ++ compat/libpng/configure | 15812 +++++++++++++ compat/libpng/configure.ac | 324 + compat/libpng/contrib/README.txt | 5 + compat/libpng/contrib/arm-neon/README | 83 + compat/libpng/contrib/arm-neon/android-ndk.c | 39 + compat/libpng/contrib/arm-neon/linux-auxv.c | 120 + compat/libpng/contrib/arm-neon/linux.c | 161 + compat/libpng/contrib/conftest/README | 49 + compat/libpng/contrib/conftest/read.dfa | 58 + compat/libpng/contrib/conftest/s_read.dfa | 35 + compat/libpng/contrib/conftest/s_write.dfa | 33 + compat/libpng/contrib/conftest/simple.dfa | 36 + compat/libpng/contrib/conftest/write.dfa | 45 + compat/libpng/contrib/examples/README.txt | 24 + compat/libpng/contrib/examples/iccfrompng.c | 185 + compat/libpng/contrib/examples/pngpixel.c | 371 + compat/libpng/contrib/examples/pngtopng.c | 95 + compat/libpng/contrib/examples/simpleover.c | 648 + compat/libpng/contrib/gregbook/COPYING | 340 + compat/libpng/contrib/gregbook/LICENSE | 50 + compat/libpng/contrib/gregbook/Makefile.mingw32 | 131 + compat/libpng/contrib/gregbook/Makefile.sgi | 105 + compat/libpng/contrib/gregbook/Makefile.unx | 134 + compat/libpng/contrib/gregbook/Makefile.w32 | 114 + compat/libpng/contrib/gregbook/README | 186 + compat/libpng/contrib/gregbook/makevms.com | 132 + compat/libpng/contrib/gregbook/readpng.c | 317 + compat/libpng/contrib/gregbook/readpng.h | 88 + compat/libpng/contrib/gregbook/readpng2.c | 520 + compat/libpng/contrib/gregbook/readpng2.h | 116 + compat/libpng/contrib/gregbook/readppm.c | 183 + compat/libpng/contrib/gregbook/rpng-win.c | 728 + compat/libpng/contrib/gregbook/rpng-x.c | 910 + compat/libpng/contrib/gregbook/rpng2-win.c | 1255 ++ compat/libpng/contrib/gregbook/rpng2-x.c | 2134 ++ compat/libpng/contrib/gregbook/toucan.png | Bin 0 -> 12901 bytes compat/libpng/contrib/gregbook/wpng.c | 853 + compat/libpng/contrib/gregbook/writepng.c | 401 + compat/libpng/contrib/gregbook/writepng.h | 133 + compat/libpng/contrib/libtests/fakepng.c | 65 + compat/libpng/contrib/libtests/gentests.sh | 102 + compat/libpng/contrib/libtests/makepng.c | 1941 ++ compat/libpng/contrib/libtests/pngimage.c | 1687 ++ compat/libpng/contrib/libtests/pngstest-errors.h | 165 + compat/libpng/contrib/libtests/pngstest.c | 3722 +++ compat/libpng/contrib/libtests/pngunknown.c | 1261 ++ compat/libpng/contrib/libtests/pngvalid.c | 11854 ++++++++++ compat/libpng/contrib/libtests/readpng.c | 115 + compat/libpng/contrib/libtests/tarith.c | 999 + compat/libpng/contrib/libtests/timepng.c | 303 + compat/libpng/contrib/pngminim/README | 5 + compat/libpng/contrib/pngminim/decoder/README | 10 + compat/libpng/contrib/pngminim/decoder/makefile | 151 + compat/libpng/contrib/pngminim/decoder/pngusr.dfa | 40 + compat/libpng/contrib/pngminim/decoder/pngusr.h | 23 + compat/libpng/contrib/pngminim/encoder/README | 10 + compat/libpng/contrib/pngminim/encoder/makefile | 150 + compat/libpng/contrib/pngminim/encoder/pngusr.dfa | 39 + compat/libpng/contrib/pngminim/encoder/pngusr.h | 23 + compat/libpng/contrib/pngminim/preader/README | 15 + compat/libpng/contrib/pngminim/preader/makefile | 166 + compat/libpng/contrib/pngminim/preader/pngusr.dfa | 40 + compat/libpng/contrib/pngminim/preader/pngusr.h | 23 + compat/libpng/contrib/pngminus/README | 153 + compat/libpng/contrib/pngminus/makefile.std | 66 + compat/libpng/contrib/pngminus/makefile.tc3 | 38 + compat/libpng/contrib/pngminus/makevms.com | 92 + compat/libpng/contrib/pngminus/png2pnm.bat | 41 + compat/libpng/contrib/pngminus/png2pnm.c | 438 + compat/libpng/contrib/pngminus/png2pnm.sh | 42 + compat/libpng/contrib/pngminus/pngminus.bat | 4 + compat/libpng/contrib/pngminus/pngminus.sh | 5 + compat/libpng/contrib/pngminus/pnm2png.bat | 41 + compat/libpng/contrib/pngminus/pnm2png.c | 616 + compat/libpng/contrib/pngminus/pnm2png.sh | 42 + compat/libpng/contrib/pngsuite/README | 105 + compat/libpng/contrib/pngsuite/basn0g01.png | Bin 0 -> 164 bytes compat/libpng/contrib/pngsuite/basn0g02.png | Bin 0 -> 104 bytes compat/libpng/contrib/pngsuite/basn0g04.png | Bin 0 -> 145 bytes compat/libpng/contrib/pngsuite/basn0g08.png | Bin 0 -> 138 bytes compat/libpng/contrib/pngsuite/basn0g16.png | Bin 0 -> 167 bytes compat/libpng/contrib/pngsuite/basn2c08.png | Bin 0 -> 145 bytes compat/libpng/contrib/pngsuite/basn2c16.png | Bin 0 -> 302 bytes compat/libpng/contrib/pngsuite/basn3p01.png | Bin 0 -> 112 bytes compat/libpng/contrib/pngsuite/basn3p02.png | Bin 0 -> 146 bytes compat/libpng/contrib/pngsuite/basn3p04.png | Bin 0 -> 216 bytes compat/libpng/contrib/pngsuite/basn3p08.png | Bin 0 -> 1286 bytes compat/libpng/contrib/pngsuite/basn4a08.png | Bin 0 -> 126 bytes compat/libpng/contrib/pngsuite/basn4a16.png | Bin 0 -> 2206 bytes compat/libpng/contrib/pngsuite/basn6a08.png | Bin 0 -> 184 bytes compat/libpng/contrib/pngsuite/basn6a16.png | Bin 0 -> 3435 bytes compat/libpng/contrib/pngsuite/ftbbn0g01.png | Bin 0 -> 176 bytes compat/libpng/contrib/pngsuite/ftbbn0g02.png | Bin 0 -> 197 bytes compat/libpng/contrib/pngsuite/ftbbn0g04.png | Bin 0 -> 429 bytes compat/libpng/contrib/pngsuite/ftbbn2c16.png | Bin 0 -> 2041 bytes compat/libpng/contrib/pngsuite/ftbbn3p08.png | Bin 0 -> 1499 bytes compat/libpng/contrib/pngsuite/ftbgn2c16.png | Bin 0 -> 2041 bytes compat/libpng/contrib/pngsuite/ftbgn3p08.png | Bin 0 -> 1499 bytes compat/libpng/contrib/pngsuite/ftbrn2c08.png | Bin 0 -> 1633 bytes compat/libpng/contrib/pngsuite/ftbwn0g16.png | Bin 0 -> 1313 bytes compat/libpng/contrib/pngsuite/ftbwn3p08.png | Bin 0 -> 1496 bytes compat/libpng/contrib/pngsuite/ftbyn3p08.png | Bin 0 -> 1499 bytes compat/libpng/contrib/pngsuite/ftp0n0g08.png | Bin 0 -> 719 bytes compat/libpng/contrib/pngsuite/ftp0n2c08.png | Bin 0 -> 1594 bytes compat/libpng/contrib/pngsuite/ftp0n3p08.png | Bin 0 -> 1476 bytes compat/libpng/contrib/pngsuite/ftp1n3p08.png | Bin 0 -> 1483 bytes compat/libpng/contrib/testpngs/gray-1-1.8-tRNS.png | Bin 0 -> 325 bytes compat/libpng/contrib/testpngs/gray-1-1.8.png | Bin 0 -> 311 bytes .../libpng/contrib/testpngs/gray-1-linear-tRNS.png | Bin 0 -> 325 bytes compat/libpng/contrib/testpngs/gray-1-linear.png | Bin 0 -> 311 bytes .../libpng/contrib/testpngs/gray-1-sRGB-tRNS.png | Bin 0 -> 278 bytes compat/libpng/contrib/testpngs/gray-1-sRGB.png | Bin 0 -> 264 bytes compat/libpng/contrib/testpngs/gray-1-tRNS.png | Bin 0 -> 265 bytes compat/libpng/contrib/testpngs/gray-1.png | Bin 0 -> 251 bytes .../libpng/contrib/testpngs/gray-16-1.8-tRNS.png | Bin 0 -> 744 bytes compat/libpng/contrib/testpngs/gray-16-1.8.png | Bin 0 -> 744 bytes .../contrib/testpngs/gray-16-linear-tRNS.png | Bin 0 -> 744 bytes compat/libpng/contrib/testpngs/gray-16-linear.png | Bin 0 -> 744 bytes .../libpng/contrib/testpngs/gray-16-sRGB-tRNS.png | Bin 0 -> 697 bytes compat/libpng/contrib/testpngs/gray-16-sRGB.png | Bin 0 -> 697 bytes compat/libpng/contrib/testpngs/gray-16-tRNS.png | Bin 0 -> 684 bytes compat/libpng/contrib/testpngs/gray-16.png | Bin 0 -> 684 bytes compat/libpng/contrib/testpngs/gray-2-1.8-tRNS.png | Bin 0 -> 325 bytes compat/libpng/contrib/testpngs/gray-2-1.8.png | Bin 0 -> 311 bytes .../libpng/contrib/testpngs/gray-2-linear-tRNS.png | Bin 0 -> 325 bytes compat/libpng/contrib/testpngs/gray-2-linear.png | Bin 0 -> 311 bytes .../libpng/contrib/testpngs/gray-2-sRGB-tRNS.png | Bin 0 -> 278 bytes compat/libpng/contrib/testpngs/gray-2-sRGB.png | Bin 0 -> 264 bytes compat/libpng/contrib/testpngs/gray-2-tRNS.png | Bin 0 -> 265 bytes compat/libpng/contrib/testpngs/gray-2.png | Bin 0 -> 251 bytes compat/libpng/contrib/testpngs/gray-4-1.8-tRNS.png | Bin 0 -> 327 bytes compat/libpng/contrib/testpngs/gray-4-1.8.png | Bin 0 -> 313 bytes .../libpng/contrib/testpngs/gray-4-linear-tRNS.png | Bin 0 -> 327 bytes compat/libpng/contrib/testpngs/gray-4-linear.png | Bin 0 -> 313 bytes .../libpng/contrib/testpngs/gray-4-sRGB-tRNS.png | Bin 0 -> 280 bytes compat/libpng/contrib/testpngs/gray-4-sRGB.png | Bin 0 -> 266 bytes compat/libpng/contrib/testpngs/gray-4-tRNS.png | Bin 0 -> 267 bytes compat/libpng/contrib/testpngs/gray-4.png | Bin 0 -> 253 bytes compat/libpng/contrib/testpngs/gray-8-1.8-tRNS.png | Bin 0 -> 327 bytes compat/libpng/contrib/testpngs/gray-8-1.8.png | Bin 0 -> 313 bytes .../libpng/contrib/testpngs/gray-8-linear-tRNS.png | Bin 0 -> 327 bytes compat/libpng/contrib/testpngs/gray-8-linear.png | Bin 0 -> 313 bytes .../libpng/contrib/testpngs/gray-8-sRGB-tRNS.png | Bin 0 -> 280 bytes compat/libpng/contrib/testpngs/gray-8-sRGB.png | Bin 0 -> 266 bytes compat/libpng/contrib/testpngs/gray-8-tRNS.png | Bin 0 -> 267 bytes compat/libpng/contrib/testpngs/gray-8.png | Bin 0 -> 253 bytes .../libpng/contrib/testpngs/gray-alpha-16-1.8.png | Bin 0 -> 919 bytes .../contrib/testpngs/gray-alpha-16-linear.png | Bin 0 -> 919 bytes .../libpng/contrib/testpngs/gray-alpha-16-sRGB.png | Bin 0 -> 872 bytes compat/libpng/contrib/testpngs/gray-alpha-16.png | Bin 0 -> 859 bytes .../libpng/contrib/testpngs/gray-alpha-8-1.8.png | Bin 0 -> 744 bytes .../contrib/testpngs/gray-alpha-8-linear.png | Bin 0 -> 744 bytes .../libpng/contrib/testpngs/gray-alpha-8-sRGB.png | Bin 0 -> 697 bytes compat/libpng/contrib/testpngs/gray-alpha-8.png | Bin 0 -> 684 bytes compat/libpng/contrib/testpngs/makepngs.sh | 94 + .../libpng/contrib/testpngs/palette-1-1.8-tRNS.png | Bin 0 -> 342 bytes compat/libpng/contrib/testpngs/palette-1-1.8.png | Bin 0 -> 329 bytes .../contrib/testpngs/palette-1-linear-tRNS.png | Bin 0 -> 342 bytes .../libpng/contrib/testpngs/palette-1-linear.png | Bin 0 -> 329 bytes .../contrib/testpngs/palette-1-sRGB-tRNS.png | Bin 0 -> 295 bytes compat/libpng/contrib/testpngs/palette-1-sRGB.png | Bin 0 -> 282 bytes compat/libpng/contrib/testpngs/palette-1-tRNS.png | Bin 0 -> 282 bytes compat/libpng/contrib/testpngs/palette-1.png | Bin 0 -> 269 bytes .../libpng/contrib/testpngs/palette-2-1.8-tRNS.png | Bin 0 -> 350 bytes compat/libpng/contrib/testpngs/palette-2-1.8.png | Bin 0 -> 335 bytes .../contrib/testpngs/palette-2-linear-tRNS.png | Bin 0 -> 350 bytes .../libpng/contrib/testpngs/palette-2-linear.png | Bin 0 -> 335 bytes .../contrib/testpngs/palette-2-sRGB-tRNS.png | Bin 0 -> 303 bytes compat/libpng/contrib/testpngs/palette-2-sRGB.png | Bin 0 -> 288 bytes compat/libpng/contrib/testpngs/palette-2-tRNS.png | Bin 0 -> 290 bytes compat/libpng/contrib/testpngs/palette-2.png | Bin 0 -> 275 bytes .../libpng/contrib/testpngs/palette-4-1.8-tRNS.png | Bin 0 -> 400 bytes compat/libpng/contrib/testpngs/palette-4-1.8.png | Bin 0 -> 373 bytes .../contrib/testpngs/palette-4-linear-tRNS.png | Bin 0 -> 400 bytes .../libpng/contrib/testpngs/palette-4-linear.png | Bin 0 -> 373 bytes .../contrib/testpngs/palette-4-sRGB-tRNS.png | Bin 0 -> 353 bytes compat/libpng/contrib/testpngs/palette-4-sRGB.png | Bin 0 -> 326 bytes compat/libpng/contrib/testpngs/palette-4-tRNS.png | Bin 0 -> 340 bytes compat/libpng/contrib/testpngs/palette-4.png | Bin 0 -> 313 bytes .../libpng/contrib/testpngs/palette-8-1.8-tRNS.png | Bin 0 -> 1360 bytes compat/libpng/contrib/testpngs/palette-8-1.8.png | Bin 0 -> 1093 bytes .../contrib/testpngs/palette-8-linear-tRNS.png | Bin 0 -> 1360 bytes .../libpng/contrib/testpngs/palette-8-linear.png | Bin 0 -> 1093 bytes .../contrib/testpngs/palette-8-sRGB-tRNS.png | Bin 0 -> 1313 bytes compat/libpng/contrib/testpngs/palette-8-sRGB.png | Bin 0 -> 1046 bytes compat/libpng/contrib/testpngs/palette-8-tRNS.png | Bin 0 -> 1300 bytes compat/libpng/contrib/testpngs/palette-8.png | Bin 0 -> 1033 bytes compat/libpng/contrib/testpngs/rgb-16-1.8-tRNS.png | Bin 0 -> 1211 bytes compat/libpng/contrib/testpngs/rgb-16-1.8.png | Bin 0 -> 1211 bytes .../libpng/contrib/testpngs/rgb-16-linear-tRNS.png | Bin 0 -> 1211 bytes compat/libpng/contrib/testpngs/rgb-16-linear.png | Bin 0 -> 1211 bytes .../libpng/contrib/testpngs/rgb-16-sRGB-tRNS.png | Bin 0 -> 1164 bytes compat/libpng/contrib/testpngs/rgb-16-sRGB.png | Bin 0 -> 1164 bytes compat/libpng/contrib/testpngs/rgb-16-tRNS.png | Bin 0 -> 1151 bytes compat/libpng/contrib/testpngs/rgb-16.png | Bin 0 -> 1151 bytes compat/libpng/contrib/testpngs/rgb-8-1.8-tRNS.png | Bin 0 -> 837 bytes compat/libpng/contrib/testpngs/rgb-8-1.8.png | Bin 0 -> 819 bytes .../libpng/contrib/testpngs/rgb-8-linear-tRNS.png | Bin 0 -> 837 bytes compat/libpng/contrib/testpngs/rgb-8-linear.png | Bin 0 -> 819 bytes compat/libpng/contrib/testpngs/rgb-8-sRGB-tRNS.png | Bin 0 -> 790 bytes compat/libpng/contrib/testpngs/rgb-8-sRGB.png | Bin 0 -> 772 bytes compat/libpng/contrib/testpngs/rgb-8-tRNS.png | Bin 0 -> 777 bytes compat/libpng/contrib/testpngs/rgb-8.png | Bin 0 -> 759 bytes .../libpng/contrib/testpngs/rgb-alpha-16-1.8.png | Bin 0 -> 1437 bytes .../contrib/testpngs/rgb-alpha-16-linear.png | Bin 0 -> 1437 bytes .../libpng/contrib/testpngs/rgb-alpha-16-sRGB.png | Bin 0 -> 1390 bytes compat/libpng/contrib/testpngs/rgb-alpha-16.png | Bin 0 -> 1377 bytes compat/libpng/contrib/testpngs/rgb-alpha-8-1.8.png | Bin 0 -> 919 bytes .../libpng/contrib/testpngs/rgb-alpha-8-linear.png | Bin 0 -> 919 bytes .../libpng/contrib/testpngs/rgb-alpha-8-sRGB.png | Bin 0 -> 872 bytes compat/libpng/contrib/testpngs/rgb-alpha-8.png | Bin 0 -> 859 bytes compat/libpng/contrib/tools/README.txt | 26 + compat/libpng/contrib/tools/checksum-icc.c | 102 + compat/libpng/contrib/tools/chkfmt | 137 + compat/libpng/contrib/tools/cvtcolor.c | 188 + compat/libpng/contrib/tools/genpng.c | 867 + compat/libpng/contrib/tools/intgamma.sh | 110 + compat/libpng/contrib/tools/makesRGB.c | 430 + compat/libpng/contrib/tools/png-fix-itxt.c | 164 + compat/libpng/contrib/tools/pngfix.c | 4049 ++++ compat/libpng/contrib/tools/sRGB.h | 48 + compat/libpng/contrib/visupng/PngFile.c | 451 + compat/libpng/contrib/visupng/PngFile.h | 30 + compat/libpng/contrib/visupng/README.txt | 61 + compat/libpng/contrib/visupng/VisualPng.c | 970 + compat/libpng/contrib/visupng/VisualPng.dsp | 147 + compat/libpng/contrib/visupng/VisualPng.dsw | 29 + compat/libpng/contrib/visupng/VisualPng.ico | Bin 0 -> 768 bytes compat/libpng/contrib/visupng/VisualPng.png | Bin 0 -> 208 bytes compat/libpng/contrib/visupng/VisualPng.rc | 152 + compat/libpng/contrib/visupng/cexcept.h | 248 + compat/libpng/contrib/visupng/resource.h | 23 + compat/libpng/depcomp | 791 + compat/libpng/example.c | 1061 + compat/libpng/install-sh | 501 + compat/libpng/libpng-config.in | 127 + compat/libpng/libpng-manual.txt | 5378 +++++ compat/libpng/libpng.3 | 6124 +++++ compat/libpng/libpng.pc.in | 11 + compat/libpng/libpngpf.3 | 18 + compat/libpng/ltmain.sh | 11147 +++++++++ compat/libpng/missing | 215 + compat/libpng/png.5 | 74 + compat/libpng/png.c | 4499 ++++ compat/libpng/png.h | 3130 +++ compat/libpng/pngbar.jpg | Bin 0 -> 2498 bytes compat/libpng/pngbar.png | Bin 0 -> 2399 bytes compat/libpng/pngconf.h | 622 + compat/libpng/pngdebug.h | 153 + compat/libpng/pngerror.c | 963 + compat/libpng/pngget.c | 1219 + compat/libpng/pnginfo.h | 259 + compat/libpng/pngmem.c | 284 + compat/libpng/pngnow.png | Bin 0 -> 2069 bytes compat/libpng/pngpread.c | 1085 + compat/libpng/pngpriv.h | 1932 ++ compat/libpng/pngread.c | 4136 ++++ compat/libpng/pngrio.c | 120 + compat/libpng/pngrtran.c | 4997 +++++ compat/libpng/pngrutil.c | 4529 ++++ compat/libpng/pngset.c | 1731 ++ compat/libpng/pngstruct.h | 483 + compat/libpng/pngtest.c | 2073 ++ compat/libpng/pngtest.png | Bin 0 -> 8695 bytes compat/libpng/pngtrans.c | 849 + compat/libpng/pngusr.dfa | 14 + compat/libpng/pngwio.c | 168 + compat/libpng/pngwrite.c | 2230 ++ compat/libpng/pngwtran.c | 576 + compat/libpng/pngwutil.c | 2625 +++ compat/libpng/projects/owatcom/libpng.tgt | 383 + compat/libpng/projects/owatcom/libpng.wpj | 112 + compat/libpng/projects/owatcom/pngconfig.mak | 160 + compat/libpng/projects/owatcom/pngstest.tgt | 219 + compat/libpng/projects/owatcom/pngtest.tgt | 179 + compat/libpng/projects/owatcom/pngvalid.tgt | 210 + compat/libpng/projects/visualc71/PRJ0041.mak | 21 + compat/libpng/projects/visualc71/README.txt | 58 + compat/libpng/projects/visualc71/README_zlib.txt | 44 + compat/libpng/projects/visualc71/libpng.sln | 60 + compat/libpng/projects/visualc71/libpng.vcproj | 419 + compat/libpng/projects/visualc71/pngtest.vcproj | 267 + compat/libpng/projects/visualc71/zlib.vcproj | 391 + compat/libpng/projects/vstudio/README.txt | 95 + .../libpng/projects/vstudio/libpng/libpng.vcxproj | 234 + .../projects/vstudio/pnglibconf/pnglibconf.vcxproj | 61 + .../projects/vstudio/pngstest/pngstest.vcxproj | 219 + .../projects/vstudio/pngtest/pngtest.vcxproj | 220 + .../projects/vstudio/pngunknown/pngunknown.vcxproj | 219 + .../projects/vstudio/pngvalid/pngvalid.vcxproj | 219 + compat/libpng/projects/vstudio/vstudio.sln | 109 + compat/libpng/projects/vstudio/zlib.props | 45 + compat/libpng/projects/vstudio/zlib/zlib.vcxproj | 169 + compat/libpng/scripts/README.txt | 84 + compat/libpng/scripts/SCOPTIONS.ppc | 7 + compat/libpng/scripts/checksym.awk | 173 + compat/libpng/scripts/def.c | 29 + compat/libpng/scripts/descrip.mms | 52 + compat/libpng/scripts/dfn.awk | 203 + compat/libpng/scripts/intprefix.c | 22 + compat/libpng/scripts/libpng-config-body.in | 96 + compat/libpng/scripts/libpng-config-head.in | 24 + compat/libpng/scripts/libpng.pc.in | 10 + compat/libpng/scripts/libtool.m4 | 8369 +++++++ compat/libpng/scripts/ltoptions.m4 | 437 + compat/libpng/scripts/ltsugar.m4 | 124 + compat/libpng/scripts/ltversion.m4 | 23 + compat/libpng/scripts/lt~obsolete.m4 | 99 + compat/libpng/scripts/macro.lst | 3 + compat/libpng/scripts/makefile.32sunu | 244 + compat/libpng/scripts/makefile.64sunu | 244 + compat/libpng/scripts/makefile.acorn | 57 + compat/libpng/scripts/makefile.aix | 116 + compat/libpng/scripts/makefile.amiga | 58 + compat/libpng/scripts/makefile.atari | 71 + compat/libpng/scripts/makefile.bc32 | 158 + compat/libpng/scripts/makefile.beos | 222 + compat/libpng/scripts/makefile.bor | 170 + compat/libpng/scripts/makefile.cegcc | 116 + compat/libpng/scripts/makefile.darwin | 225 + compat/libpng/scripts/makefile.dec | 210 + compat/libpng/scripts/makefile.dj2 | 72 + compat/libpng/scripts/makefile.freebsd | 69 + compat/libpng/scripts/makefile.gcc | 87 + compat/libpng/scripts/makefile.hp64 | 231 + compat/libpng/scripts/makefile.hpgcc | 234 + compat/libpng/scripts/makefile.hpux | 229 + compat/libpng/scripts/makefile.ibmc | 90 + compat/libpng/scripts/makefile.intel | 115 + compat/libpng/scripts/makefile.knr | 116 + compat/libpng/scripts/makefile.linux | 247 + compat/libpng/scripts/makefile.mips | 103 + compat/libpng/scripts/makefile.msc | 100 + compat/libpng/scripts/makefile.msys | 201 + compat/libpng/scripts/makefile.ne12bsd | 56 + compat/libpng/scripts/makefile.netbsd | 56 + compat/libpng/scripts/makefile.openbsd | 88 + compat/libpng/scripts/makefile.sco | 226 + compat/libpng/scripts/makefile.sggcc | 236 + compat/libpng/scripts/makefile.sgi | 237 + compat/libpng/scripts/makefile.so9 | 247 + compat/libpng/scripts/makefile.solaris | 244 + compat/libpng/scripts/makefile.solaris-x86 | 243 + compat/libpng/scripts/makefile.std | 134 + compat/libpng/scripts/makefile.sunos | 115 + compat/libpng/scripts/makefile.tc3 | 100 + compat/libpng/scripts/makefile.vcwin32 | 113 + compat/libpng/scripts/makevms.com | 142 + compat/libpng/scripts/options.awk | 898 + compat/libpng/scripts/pnglibconf.dfa | 887 + compat/libpng/scripts/pnglibconf.h.prebuilt | 214 + compat/libpng/scripts/pnglibconf.mak | 55 + compat/libpng/scripts/pngwin.rc | 112 + compat/libpng/scripts/prefix.c | 24 + compat/libpng/scripts/smakefile.ppc | 34 + compat/libpng/scripts/sym.c | 15 + compat/libpng/scripts/symbols.c | 58 + compat/libpng/scripts/symbols.def | 251 + compat/libpng/scripts/vers.c | 19 + compat/libpng/test-driver | 148 + compat/libpng/tests/pngimage-full | 2 + compat/libpng/tests/pngimage-quick | 2 + compat/libpng/tests/pngstest | 52 + compat/libpng/tests/pngstest-0g01 | 2 + compat/libpng/tests/pngstest-0g02 | 2 + compat/libpng/tests/pngstest-0g04 | 2 + compat/libpng/tests/pngstest-0g08 | 2 + compat/libpng/tests/pngstest-0g16 | 2 + compat/libpng/tests/pngstest-1.8 | 2 + compat/libpng/tests/pngstest-1.8-alpha | 2 + compat/libpng/tests/pngstest-2c08 | 2 + compat/libpng/tests/pngstest-2c16 | 2 + compat/libpng/tests/pngstest-3p01 | 2 + compat/libpng/tests/pngstest-3p02 | 2 + compat/libpng/tests/pngstest-3p04 | 2 + compat/libpng/tests/pngstest-3p08 | 2 + compat/libpng/tests/pngstest-4a08 | 2 + compat/libpng/tests/pngstest-4a16 | 2 + compat/libpng/tests/pngstest-6a08 | 2 + compat/libpng/tests/pngstest-6a16 | 2 + compat/libpng/tests/pngstest-error | 14 + compat/libpng/tests/pngstest-linear | 2 + compat/libpng/tests/pngstest-linear-alpha | 2 + compat/libpng/tests/pngstest-none | 2 + compat/libpng/tests/pngstest-none-alpha | 2 + compat/libpng/tests/pngstest-sRGB | 2 + compat/libpng/tests/pngstest-sRGB-alpha | 2 + compat/libpng/tests/pngtest | 2 + compat/libpng/tests/pngunknown-IDAT | 2 + compat/libpng/tests/pngunknown-discard | 2 + compat/libpng/tests/pngunknown-if-safe | 2 + compat/libpng/tests/pngunknown-sAPI | 2 + compat/libpng/tests/pngunknown-sTER | 2 + compat/libpng/tests/pngunknown-save | 2 + compat/libpng/tests/pngunknown-vpAg | 2 + compat/libpng/tests/pngvalid-gamma-16-to-8 | 2 + compat/libpng/tests/pngvalid-gamma-alpha-mode | 2 + compat/libpng/tests/pngvalid-gamma-background | 2 + .../tests/pngvalid-gamma-expand16-alpha-mode | 2 + .../tests/pngvalid-gamma-expand16-background | 2 + .../libpng/tests/pngvalid-gamma-expand16-transform | 2 + compat/libpng/tests/pngvalid-gamma-sbit | 2 + compat/libpng/tests/pngvalid-gamma-threshold | 2 + compat/libpng/tests/pngvalid-gamma-transform | 2 + .../tests/pngvalid-progressive-interlace-size | 2 + .../tests/pngvalid-progressive-interlace-standard | 2 + .../tests/pngvalid-progressive-interlace-transform | 2 + compat/libpng/tests/pngvalid-progressive-size | 2 + compat/libpng/tests/pngvalid-progressive-standard | 2 + compat/libpng/tests/pngvalid-standard | 2 + compat/libpng/tests/pngvalid-transform | 2 + compat/libtiff/COPYRIGHT | 21 + compat/libtiff/ChangeLog | 4929 ++++ compat/libtiff/HOWTO-RELEASE | 106 + compat/libtiff/Makefile.am | 56 + compat/libtiff/Makefile.in | 897 + compat/libtiff/Makefile.vc | 65 + compat/libtiff/README | 59 + compat/libtiff/README.vms | 12 + compat/libtiff/RELEASE-DATE | 1 + compat/libtiff/SConstruct | 171 + compat/libtiff/TODO | 12 + compat/libtiff/VERSION | 1 + compat/libtiff/aclocal.m4 | 1080 + compat/libtiff/autogen.sh | 8 + compat/libtiff/build/Makefile.am | 31 + compat/libtiff/build/Makefile.in | 644 + compat/libtiff/build/README | 3 + compat/libtiff/config.guess | 1415 ++ compat/libtiff/config.site | 174 + compat/libtiff/config.sub | 1510 ++ compat/libtiff/config/compile | 142 + compat/libtiff/config/config.guess | 1516 ++ compat/libtiff/config/config.sub | 1622 ++ compat/libtiff/config/depcomp | 530 + compat/libtiff/config/install-sh | 401 + compat/libtiff/config/ltmain.sh | 9655 ++++++++ compat/libtiff/config/missing | 360 + compat/libtiff/config/mkinstalldirs | 158 + compat/libtiff/config/test-driver | 127 + compat/libtiff/configure | 22423 +++++++++++++++++++ compat/libtiff/configure.ac | 735 + compat/libtiff/configure.com | 1345 ++ compat/libtiff/contrib/Makefile.am | 29 + compat/libtiff/contrib/Makefile.in | 642 + compat/libtiff/contrib/README | 2 + compat/libtiff/contrib/acorn/Makefile | 385 + compat/libtiff/contrib/acorn/Makefile.acorn | 165 + compat/libtiff/contrib/acorn/Makefile.am | 28 + compat/libtiff/contrib/acorn/Makefile.in | 453 + compat/libtiff/contrib/acorn/ReadMe | 79 + compat/libtiff/contrib/acorn/SetVars | 3 + compat/libtiff/contrib/acorn/cleanlib | 5 + compat/libtiff/contrib/acorn/convert | 175 + compat/libtiff/contrib/acorn/install | 128 + compat/libtiff/contrib/addtiffo/Makefile | 501 + compat/libtiff/contrib/addtiffo/Makefile.am | 36 + compat/libtiff/contrib/addtiffo/Makefile.in | 601 + compat/libtiff/contrib/addtiffo/Makefile.vc | 28 + compat/libtiff/contrib/addtiffo/README | 142 + compat/libtiff/contrib/addtiffo/addtiffo.c | 176 + compat/libtiff/contrib/addtiffo/tif_overview.c | 896 + compat/libtiff/contrib/addtiffo/tif_ovrcache.c | 341 + compat/libtiff/contrib/addtiffo/tif_ovrcache.h | 108 + compat/libtiff/contrib/dbs/Imakefile | 12 + compat/libtiff/contrib/dbs/Makefile.am | 43 + compat/libtiff/contrib/dbs/Makefile.in | 757 + compat/libtiff/contrib/dbs/README | 7 + compat/libtiff/contrib/dbs/tiff-bi.c | 91 + compat/libtiff/contrib/dbs/tiff-grayscale.c | 146 + compat/libtiff/contrib/dbs/tiff-palette.c | 283 + compat/libtiff/contrib/dbs/tiff-rgb.c | 201 + compat/libtiff/contrib/dbs/xtiff/Imakefile | 17 + compat/libtiff/contrib/dbs/xtiff/Makefile.am | 43 + compat/libtiff/contrib/dbs/xtiff/Makefile.in | 468 + compat/libtiff/contrib/dbs/xtiff/README | 6 + compat/libtiff/contrib/dbs/xtiff/patchlevel.h | 8 + compat/libtiff/contrib/dbs/xtiff/xtiff.c | 1290 ++ compat/libtiff/contrib/dbs/xtiff/xtifficon.h | 21 + compat/libtiff/contrib/dosdjgpp/Makefile.lib | 249 + compat/libtiff/contrib/dosdjgpp/Makefile.tools | 217 + compat/libtiff/contrib/dosdjgpp/Makefile.top | 54 + compat/libtiff/contrib/dosdjgpp/README | 30 + compat/libtiff/contrib/dosdjgpp/conf.bat | 11 + compat/libtiff/contrib/dosdjgpp/port.h | 29 + compat/libtiff/contrib/iptcutil/Makefile | 498 + compat/libtiff/contrib/iptcutil/Makefile.am | 36 + compat/libtiff/contrib/iptcutil/Makefile.in | 598 + compat/libtiff/contrib/iptcutil/README | 25 + compat/libtiff/contrib/iptcutil/iptcutil.c | 941 + compat/libtiff/contrib/iptcutil/test.iptc | Bin 0 -> 1112 bytes compat/libtiff/contrib/iptcutil/test.txt | 32 + compat/libtiff/contrib/mac-cw/Makefile.am | 27 + compat/libtiff/contrib/mac-cw/Makefile.in | 452 + compat/libtiff/contrib/mac-cw/Makefile.script | 72 + compat/libtiff/contrib/mac-cw/README | 18 + compat/libtiff/contrib/mac-cw/mac_main.c | 27 + compat/libtiff/contrib/mac-cw/mac_main.h | 19 + compat/libtiff/contrib/mac-cw/metrowerks.note | 84 + compat/libtiff/contrib/mac-cw/mkg3_main.c | 21 + compat/libtiff/contrib/mac-cw/version.h | 11 + compat/libtiff/contrib/mac-mpw/BUILD.mpw | 47 + compat/libtiff/contrib/mac-mpw/Makefile.am | 27 + compat/libtiff/contrib/mac-mpw/Makefile.in | 452 + compat/libtiff/contrib/mac-mpw/README | 20 + compat/libtiff/contrib/mac-mpw/libtiff.make | 202 + compat/libtiff/contrib/mac-mpw/mactrans.c | 63 + compat/libtiff/contrib/mac-mpw/port.make | 53 + compat/libtiff/contrib/mac-mpw/tools.make | 138 + compat/libtiff/contrib/mac-mpw/top.make | 133 + compat/libtiff/contrib/mfs/Makefile.am | 28 + compat/libtiff/contrib/mfs/Makefile.in | 453 + compat/libtiff/contrib/mfs/README | 37 + compat/libtiff/contrib/mfs/mfs_file.c | 586 + compat/libtiff/contrib/ojpeg/Makefile.am | 27 + compat/libtiff/contrib/ojpeg/Makefile.in | 385 + compat/libtiff/contrib/ojpeg/README | 24 + compat/libtiff/contrib/ojpeg/jdhuff_add.c | 32 + compat/libtiff/contrib/pds/Makefile.am | 28 + compat/libtiff/contrib/pds/Makefile.in | 453 + compat/libtiff/contrib/pds/README | 90 + compat/libtiff/contrib/pds/tif_imageiter.c | 525 + compat/libtiff/contrib/pds/tif_imageiter.h | 64 + compat/libtiff/contrib/pds/tif_pdsdirread.c | 1131 + compat/libtiff/contrib/pds/tif_pdsdirwrite.c | 971 + compat/libtiff/contrib/ras/Makefile.am | 28 + compat/libtiff/contrib/ras/Makefile.in | 453 + compat/libtiff/contrib/ras/README | 10 + compat/libtiff/contrib/ras/ras2tif.c | 254 + compat/libtiff/contrib/ras/tif2ras.c | 344 + compat/libtiff/contrib/stream/Makefile.am | 28 + compat/libtiff/contrib/stream/Makefile.in | 453 + compat/libtiff/contrib/stream/README | 30 + compat/libtiff/contrib/stream/tiffstream.cpp | 238 + compat/libtiff/contrib/stream/tiffstream.h | 69 + compat/libtiff/contrib/tags/Makefile.am | 28 + compat/libtiff/contrib/tags/Makefile.gcc | 56 + compat/libtiff/contrib/tags/Makefile.in | 453 + compat/libtiff/contrib/tags/Makefile.mpw | 67 + compat/libtiff/contrib/tags/README | 132 + compat/libtiff/contrib/tags/listtif.c | 39 + compat/libtiff/contrib/tags/maketif.c | 77 + compat/libtiff/contrib/tags/xtif_dir.c | 350 + compat/libtiff/contrib/tags/xtiffio.h | 59 + compat/libtiff/contrib/tags/xtiffiop.h | 72 + compat/libtiff/contrib/vms/libtiff/makevms.com | 229 + compat/libtiff/contrib/vms/libtiff/tiff.opt | 1 + compat/libtiff/contrib/vms/libtiff/tiffshraxp.opt | 122 + compat/libtiff/contrib/vms/libtiff/tiffshrvax.opt | 18 + compat/libtiff/contrib/vms/libtiff/tiffvec.mar | 131 + compat/libtiff/contrib/vms/tools/makevms.com | 113 + compat/libtiff/contrib/win32/README | 111 + compat/libtiff/contrib/win32/dllshell.c | 38 + compat/libtiff/contrib/win32/libtiff.def | 72 + compat/libtiff/contrib/win_dib/Makefile.am | 28 + compat/libtiff/contrib/win_dib/Makefile.in | 453 + compat/libtiff/contrib/win_dib/Makefile.w95 | 134 + compat/libtiff/contrib/win_dib/README.Tiffile | 31 + compat/libtiff/contrib/win_dib/README.tiff2dib | 51 + compat/libtiff/contrib/win_dib/Tiffile.cpp | 449 + compat/libtiff/contrib/win_dib/tiff2dib.c | 379 + compat/libtiff/contrib/winnt/README | 26 + compat/libtiff/contrib/winnt/README.console | 182 + compat/libtiff/contrib/winnt/fax3sm.c | 1046 + compat/libtiff/contrib/winnt/libtiff.def | 72 + compat/libtiff/contrib/winnt/libtiff.mak | 1947 ++ compat/libtiff/contrib/winnt/libtiff.vcp | Bin 0 -> 17477 bytes compat/libtiff/contrib/winnt/version.h | 1 + compat/libtiff/html/Makefile.am | 84 + compat/libtiff/html/Makefile.in | 750 + compat/libtiff/html/TIFFTechNote2.html | 707 + compat/libtiff/html/addingtags.html | 292 + compat/libtiff/html/bugs.html | 63 + compat/libtiff/html/build.html | 524 + compat/libtiff/html/contrib.html | 209 + compat/libtiff/html/document.html | 48 + compat/libtiff/html/images.html | 41 + compat/libtiff/html/images/Makefile.am | 46 + compat/libtiff/html/images/Makefile.in | 525 + compat/libtiff/html/images/back.gif | Bin 0 -> 1000 bytes compat/libtiff/html/images/bali.jpg | Bin 0 -> 26152 bytes compat/libtiff/html/images/cat.gif | Bin 0 -> 12477 bytes compat/libtiff/html/images/cover.jpg | Bin 0 -> 20189 bytes compat/libtiff/html/images/cramps.gif | Bin 0 -> 13137 bytes compat/libtiff/html/images/dave.gif | Bin 0 -> 8220 bytes compat/libtiff/html/images/info.gif | Bin 0 -> 131 bytes compat/libtiff/html/images/jello.jpg | Bin 0 -> 13744 bytes compat/libtiff/html/images/jim.gif | Bin 0 -> 14493 bytes compat/libtiff/html/images/note.gif | Bin 0 -> 264 bytes compat/libtiff/html/images/oxford.gif | Bin 0 -> 6069 bytes compat/libtiff/html/images/quad.jpg | Bin 0 -> 23904 bytes compat/libtiff/html/images/ring.gif | Bin 0 -> 4275 bytes compat/libtiff/html/images/smallliz.jpg | Bin 0 -> 16463 bytes compat/libtiff/html/images/strike.gif | Bin 0 -> 5610 bytes compat/libtiff/html/images/warning.gif | Bin 0 -> 287 bytes compat/libtiff/html/index.html | 120 + compat/libtiff/html/internals.html | 572 + compat/libtiff/html/intro.html | 68 + compat/libtiff/html/libtiff.html | 747 + compat/libtiff/html/man/Makefile.am | 119 + compat/libtiff/html/man/Makefile.in | 594 + compat/libtiff/html/man/TIFFClose.3tiff.html | 87 + compat/libtiff/html/man/TIFFDataWidth.3tiff.html | 98 + compat/libtiff/html/man/TIFFError.3tiff.html | 106 + compat/libtiff/html/man/TIFFFlush.3tiff.html | 113 + compat/libtiff/html/man/TIFFGetField.3tiff.html | 1446 ++ compat/libtiff/html/man/TIFFOpen.3tiff.html | 421 + .../libtiff/html/man/TIFFPrintDirectory.3tiff.html | 225 + compat/libtiff/html/man/TIFFRGBAImage.3tiff.html | 319 + .../libtiff/html/man/TIFFReadDirectory.3tiff.html | 218 + .../html/man/TIFFReadEncodedStrip.3tiff.html | 133 + .../html/man/TIFFReadEncodedTile.3tiff.html | 130 + .../libtiff/html/man/TIFFReadRGBAImage.3tiff.html | 301 + .../libtiff/html/man/TIFFReadRGBAStrip.3tiff.html | 208 + .../libtiff/html/man/TIFFReadRGBATile.3tiff.html | 261 + .../libtiff/html/man/TIFFReadRawStrip.3tiff.html | 109 + compat/libtiff/html/man/TIFFReadRawTile.3tiff.html | 111 + .../libtiff/html/man/TIFFReadScanline.3tiff.html | 157 + compat/libtiff/html/man/TIFFReadTile.3tiff.html | 133 + .../libtiff/html/man/TIFFSetDirectory.3tiff.html | 122 + compat/libtiff/html/man/TIFFSetField.3tiff.html | 1362 ++ compat/libtiff/html/man/TIFFWarning.3tiff.html | 108 + .../libtiff/html/man/TIFFWriteDirectory.3tiff.html | 176 + .../html/man/TIFFWriteEncodedStrip.3tiff.html | 153 + .../html/man/TIFFWriteEncodedTile.3tiff.html | 147 + .../libtiff/html/man/TIFFWriteRawStrip.3tiff.html | 144 + .../libtiff/html/man/TIFFWriteRawTile.3tiff.html | 128 + .../libtiff/html/man/TIFFWriteScanline.3tiff.html | 206 + compat/libtiff/html/man/TIFFWriteTile.3tiff.html | 115 + compat/libtiff/html/man/TIFFbuffer.3tiff.html | 116 + compat/libtiff/html/man/TIFFcodec.3tiff.html | 116 + compat/libtiff/html/man/TIFFcolor.3tiff.html | 975 + compat/libtiff/html/man/TIFFmemory.3tiff.html | 110 + compat/libtiff/html/man/TIFFquery.3tiff.html | 148 + compat/libtiff/html/man/TIFFsize.3tiff.html | 95 + compat/libtiff/html/man/TIFFstrip.3tiff.html | 129 + compat/libtiff/html/man/TIFFswab.3tiff.html | 110 + compat/libtiff/html/man/TIFFtile.3tiff.html | 141 + compat/libtiff/html/man/fax2ps.1.html | 252 + compat/libtiff/html/man/fax2tiff.1.html | 607 + compat/libtiff/html/man/gif2tiff.1.html | 141 + compat/libtiff/html/man/index.html | 64 + compat/libtiff/html/man/libtiff.3tiff.html | 3137 +++ compat/libtiff/html/man/pal2rgb.1.html | 189 + compat/libtiff/html/man/ppm2tiff.1.html | 141 + compat/libtiff/html/man/ras2tiff.1.html | 139 + compat/libtiff/html/man/raw2tiff.1.html | 510 + compat/libtiff/html/man/rgb2ycbcr.1.html | 155 + compat/libtiff/html/man/sgi2tiff.1.html | 147 + compat/libtiff/html/man/thumbnail.1.html | 148 + compat/libtiff/html/man/tiff2bw.1.html | 161 + compat/libtiff/html/man/tiff2pdf.1.html | 609 + compat/libtiff/html/man/tiff2ps.1.html | 532 + compat/libtiff/html/man/tiff2rgba.1.html | 162 + compat/libtiff/html/man/tiffcmp.1.html | 156 + compat/libtiff/html/man/tiffcp.1.html | 536 + compat/libtiff/html/man/tiffcrop.1.html | 851 + compat/libtiff/html/man/tiffdither.1.html | 183 + compat/libtiff/html/man/tiffdump.1.html | 145 + compat/libtiff/html/man/tiffgt.1.html | 551 + compat/libtiff/html/man/tiffinfo.1.html | 196 + compat/libtiff/html/man/tiffmedian.1.html | 183 + compat/libtiff/html/man/tiffset.1.html | 176 + compat/libtiff/html/man/tiffsplit.1.html | 102 + compat/libtiff/html/man/tiffsv.1.html | 207 + compat/libtiff/html/misc.html | 116 + compat/libtiff/html/support.html | 655 + compat/libtiff/html/tools.html | 164 + compat/libtiff/html/v3.4beta007.html | 112 + compat/libtiff/html/v3.4beta016.html | 122 + compat/libtiff/html/v3.4beta018.html | 84 + compat/libtiff/html/v3.4beta024.html | 139 + compat/libtiff/html/v3.4beta028.html | 146 + compat/libtiff/html/v3.4beta029.html | 86 + compat/libtiff/html/v3.4beta031.html | 94 + compat/libtiff/html/v3.4beta032.html | 90 + compat/libtiff/html/v3.4beta033.html | 82 + compat/libtiff/html/v3.4beta034.html | 68 + compat/libtiff/html/v3.4beta035.html | 63 + compat/libtiff/html/v3.4beta036.html | 117 + compat/libtiff/html/v3.5.1.html | 75 + compat/libtiff/html/v3.5.2.html | 108 + compat/libtiff/html/v3.5.3.html | 132 + compat/libtiff/html/v3.5.4.html | 88 + compat/libtiff/html/v3.5.5.html | 155 + compat/libtiff/html/v3.5.6-beta.html | 185 + compat/libtiff/html/v3.5.7.html | 259 + compat/libtiff/html/v3.6.0.html | 434 + compat/libtiff/html/v3.6.1.html | 199 + compat/libtiff/html/v3.7.0.html | 144 + compat/libtiff/html/v3.7.0alpha.html | 249 + compat/libtiff/html/v3.7.0beta.html | 162 + compat/libtiff/html/v3.7.0beta2.html | 131 + compat/libtiff/html/v3.7.1.html | 233 + compat/libtiff/html/v3.7.2.html | 222 + compat/libtiff/html/v3.7.3.html | 230 + compat/libtiff/html/v3.7.4.html | 133 + compat/libtiff/html/v3.8.0.html | 199 + compat/libtiff/html/v3.8.1.html | 217 + compat/libtiff/html/v3.8.2.html | 137 + compat/libtiff/html/v3.9.0beta.html | 304 + compat/libtiff/html/v3.9.1.html | 115 + compat/libtiff/html/v3.9.2.html | 122 + compat/libtiff/libtiff/Makefile.am | 151 + compat/libtiff/libtiff/Makefile.in | 942 + compat/libtiff/libtiff/Makefile.lcc | 129 + compat/libtiff/libtiff/Makefile.vc | 102 + compat/libtiff/libtiff/SConstruct | 73 + compat/libtiff/libtiff/fax3sm_winnt.c | 1046 + compat/libtiff/libtiff/libtiff.def | 140 + compat/libtiff/libtiff/libtiff.map | 4 + compat/libtiff/libtiff/libtiffxx.map | 4 + compat/libtiff/libtiff/mkg3states.c | 451 + compat/libtiff/libtiff/mkspans.c | 72 + compat/libtiff/libtiff/mkversion.c | 148 + compat/libtiff/libtiff/t4.h | 292 + compat/libtiff/libtiff/tif_acorn.c | 526 + compat/libtiff/libtiff/tif_apple.c | 281 + compat/libtiff/libtiff/tif_atari.c | 250 + compat/libtiff/libtiff/tif_aux.c | 290 + compat/libtiff/libtiff/tif_close.c | 126 + compat/libtiff/libtiff/tif_codec.c | 160 + compat/libtiff/libtiff/tif_color.c | 287 + compat/libtiff/libtiff/tif_compress.c | 295 + compat/libtiff/libtiff/tif_config.h-vms | 46 + compat/libtiff/libtiff/tif_config.h.in | 293 + compat/libtiff/libtiff/tif_config.h.vc | 44 + compat/libtiff/libtiff/tif_config.vc.h | 63 + compat/libtiff/libtiff/tif_config.wince.h | 74 + compat/libtiff/libtiff/tif_dir.c | 1392 ++ compat/libtiff/libtiff/tif_dir.h | 211 + compat/libtiff/libtiff/tif_dirinfo.c | 884 + compat/libtiff/libtiff/tif_dirread.c | 2117 ++ compat/libtiff/libtiff/tif_dirwrite.c | 1436 ++ compat/libtiff/libtiff/tif_dumpmode.c | 126 + compat/libtiff/libtiff/tif_error.c | 80 + compat/libtiff/libtiff/tif_extension.c | 118 + compat/libtiff/libtiff/tif_fax3.c | 1626 ++ compat/libtiff/libtiff/tif_fax3.h | 538 + compat/libtiff/libtiff/tif_fax3sm.c | 1260 ++ compat/libtiff/libtiff/tif_flush.c | 74 + compat/libtiff/libtiff/tif_getimage.c | 2690 +++ compat/libtiff/libtiff/tif_jbig.c | 385 + compat/libtiff/libtiff/tif_jpeg.c | 2078 ++ compat/libtiff/libtiff/tif_luv.c | 1629 ++ compat/libtiff/libtiff/tif_lzw.c | 1129 + compat/libtiff/libtiff/tif_msdos.c | 193 + compat/libtiff/libtiff/tif_next.c | 154 + compat/libtiff/libtiff/tif_ojpeg.c | 2448 ++ compat/libtiff/libtiff/tif_open.c | 695 + compat/libtiff/libtiff/tif_packbits.c | 300 + compat/libtiff/libtiff/tif_pixarlog.c | 1371 ++ compat/libtiff/libtiff/tif_predict.c | 736 + compat/libtiff/libtiff/tif_predict.h | 77 + compat/libtiff/libtiff/tif_print.c | 640 + compat/libtiff/libtiff/tif_read.c | 750 + compat/libtiff/libtiff/tif_stream.cxx | 295 + compat/libtiff/libtiff/tif_strip.c | 381 + compat/libtiff/libtiff/tif_swab.c | 242 + compat/libtiff/libtiff/tif_thunder.c | 189 + compat/libtiff/libtiff/tif_tile.c | 292 + compat/libtiff/libtiff/tif_unix.c | 300 + compat/libtiff/libtiff/tif_version.c | 40 + compat/libtiff/libtiff/tif_vms.c | 588 + compat/libtiff/libtiff/tif_warning.c | 81 + compat/libtiff/libtiff/tif_win3.c | 232 + compat/libtiff/libtiff/tif_win32.c | 408 + compat/libtiff/libtiff/tif_write.c | 718 + compat/libtiff/libtiff/tif_zip.c | 419 + compat/libtiff/libtiff/tiff.h | 654 + compat/libtiff/libtiff/tiffcomp.h | 220 + compat/libtiff/libtiff/tiffconf.h.in | 103 + compat/libtiff/libtiff/tiffconf.h.vc | 97 + compat/libtiff/libtiff/tiffconf.vc.h | 116 + compat/libtiff/libtiff/tiffconf.wince.h | 136 + compat/libtiff/libtiff/tiffio.h | 526 + compat/libtiff/libtiff/tiffio.hxx | 49 + compat/libtiff/libtiff/tiffiop.h | 353 + compat/libtiff/libtiff/tiffvers.h | 9 + compat/libtiff/libtiff/uvcode.h | 180 + compat/libtiff/m4/acinclude.m4 | 669 + compat/libtiff/m4/libtool.m4 | 7982 +++++++ compat/libtiff/m4/ltoptions.m4 | 384 + compat/libtiff/m4/ltsugar.m4 | 123 + compat/libtiff/m4/ltversion.m4 | 23 + compat/libtiff/m4/lt~obsolete.m4 | 98 + compat/libtiff/man/Makefile.am | 92 + compat/libtiff/man/Makefile.in | 654 + compat/libtiff/man/TIFFClose.3tiff | 53 + compat/libtiff/man/TIFFDataWidth.3tiff | 74 + compat/libtiff/man/TIFFError.3tiff | 69 + compat/libtiff/man/TIFFFlush.3tiff | 64 + compat/libtiff/man/TIFFGetField.3tiff | 229 + compat/libtiff/man/TIFFOpen.3tiff | 279 + compat/libtiff/man/TIFFPrintDirectory.3tiff | 70 + compat/libtiff/man/TIFFRGBAImage.3tiff | 286 + compat/libtiff/man/TIFFReadDirectory.3tiff | 164 + compat/libtiff/man/TIFFReadEncodedStrip.3tiff | 78 + compat/libtiff/man/TIFFReadEncodedTile.3tiff | 76 + compat/libtiff/man/TIFFReadRGBAImage.3tiff | 218 + compat/libtiff/man/TIFFReadRGBAStrip.3tiff | 170 + compat/libtiff/man/TIFFReadRGBATile.3tiff | 171 + compat/libtiff/man/TIFFReadRawStrip.3tiff | 64 + compat/libtiff/man/TIFFReadRawTile.3tiff | 65 + compat/libtiff/man/TIFFReadScanline.3tiff | 94 + compat/libtiff/man/TIFFReadTile.3tiff | 84 + compat/libtiff/man/TIFFSetDirectory.3tiff | 79 + compat/libtiff/man/TIFFSetField.3tiff | 217 + compat/libtiff/man/TIFFWarning.3tiff | 70 + compat/libtiff/man/TIFFWriteDirectory.3tiff | 138 + compat/libtiff/man/TIFFWriteEncodedStrip.3tiff | 102 + compat/libtiff/man/TIFFWriteEncodedTile.3tiff | 96 + compat/libtiff/man/TIFFWriteRawStrip.3tiff | 96 + compat/libtiff/man/TIFFWriteRawTile.3tiff | 84 + compat/libtiff/man/TIFFWriteScanline.3tiff | 154 + compat/libtiff/man/TIFFWriteTile.3tiff | 77 + compat/libtiff/man/TIFFbuffer.3tiff | 77 + compat/libtiff/man/TIFFcodec.3tiff | 82 + compat/libtiff/man/TIFFcolor.3tiff | 268 + compat/libtiff/man/TIFFmemory.3tiff | 90 + compat/libtiff/man/TIFFquery.3tiff | 142 + compat/libtiff/man/TIFFsize.3tiff | 59 + compat/libtiff/man/TIFFstrip.3tiff | 99 + compat/libtiff/man/TIFFswab.3tiff | 80 + compat/libtiff/man/TIFFtile.3tiff | 131 + compat/libtiff/man/bmp2tiff.1 | 85 + compat/libtiff/man/fax2ps.1 | 159 + compat/libtiff/man/fax2tiff.1 | 286 + compat/libtiff/man/gif2tiff.1 | 81 + compat/libtiff/man/libtiff.3tiff | 536 + compat/libtiff/man/pal2rgb.1 | 111 + compat/libtiff/man/ppm2tiff.1 | 105 + compat/libtiff/man/ras2tiff.1 | 96 + compat/libtiff/man/raw2tiff.1 | 196 + compat/libtiff/man/rgb2ycbcr.1 | 99 + compat/libtiff/man/sgi2tiff.1 | 93 + compat/libtiff/man/thumbnail.1 | 90 + compat/libtiff/man/tiff2bw.1 | 94 + compat/libtiff/man/tiff2pdf.1 | 254 + compat/libtiff/man/tiff2ps.1 | 268 + compat/libtiff/man/tiff2rgba.1 | 97 + compat/libtiff/man/tiffcmp.1 | 87 + compat/libtiff/man/tiffcp.1 | 291 + compat/libtiff/man/tiffcrop.1 | 571 + compat/libtiff/man/tiffdither.1 | 132 + compat/libtiff/man/tiffdump.1 | 81 + compat/libtiff/man/tiffgt.1 | 245 + compat/libtiff/man/tiffinfo.1 | 88 + compat/libtiff/man/tiffmedian.1 | 112 + compat/libtiff/man/tiffset.1 | 82 + compat/libtiff/man/tiffsplit.1 | 69 + compat/libtiff/man/tiffsv.1 | 142 + compat/libtiff/nmake.opt | 218 + compat/libtiff/port/Makefile.am | 31 + compat/libtiff/port/Makefile.in | 603 + compat/libtiff/port/Makefile.vc | 43 + compat/libtiff/port/dummy.c | 19 + compat/libtiff/port/getopt.c | 131 + compat/libtiff/port/install.sh.in | 258 + compat/libtiff/port/irix/so_locations | 4 + compat/libtiff/port/lfind.c | 69 + compat/libtiff/port/libport.h | 58 + compat/libtiff/port/strcasecmp.c | 57 + compat/libtiff/port/strtoul.c | 116 + compat/libtiff/test/Makefile.am | 46 + compat/libtiff/test/Makefile.in | 1028 + compat/libtiff/test/ascii_tag.c | 177 + compat/libtiff/test/check_tag.c | 83 + compat/libtiff/test/long_tag.c | 161 + compat/libtiff/test/short_tag.c | 187 + compat/libtiff/test/strip.c | 298 + compat/libtiff/test/strip_rw.c | 162 + compat/libtiff/test/test_arrays.c | 836 + compat/libtiff/test/test_arrays.h | 70 + compat/libtiff/test_pics.sh | 28 + compat/libtiff/tools/Makefile.am | 145 + compat/libtiff/tools/Makefile.in | 922 + compat/libtiff/tools/Makefile.lcc | 142 + compat/libtiff/tools/Makefile.vc | 51 + compat/libtiff/tools/bmp2tiff.c | 850 + compat/libtiff/tools/fax2ps.c | 445 + compat/libtiff/tools/fax2tiff.c | 465 + compat/libtiff/tools/gif2tiff.c | 526 + compat/libtiff/tools/pal2rgb.c | 431 + compat/libtiff/tools/ppm2tiff.c | 362 + compat/libtiff/tools/ras2tiff.c | 306 + compat/libtiff/tools/rasterfile.h | 49 + compat/libtiff/tools/raw2tiff.c | 647 + compat/libtiff/tools/rgb2ycbcr.c | 382 + compat/libtiff/tools/sgi2tiff.c | 335 + compat/libtiff/tools/sgisv.c | 316 + compat/libtiff/tools/thumbnail.c | 639 + compat/libtiff/tools/tiff2bw.c | 467 + compat/libtiff/tools/tiff2pdf.c | 5384 +++++ compat/libtiff/tools/tiff2ps.c | 3073 +++ compat/libtiff/tools/tiff2rgba.c | 548 + compat/libtiff/tools/tiffcmp.c | 640 + compat/libtiff/tools/tiffcp.c | 1815 ++ compat/libtiff/tools/tiffcrop.c | 9066 ++++++++ compat/libtiff/tools/tiffdither.c | 332 + compat/libtiff/tools/tiffdump.c | 719 + compat/libtiff/tools/tiffgt.c | 462 + compat/libtiff/tools/tiffinfo.c | 456 + compat/libtiff/tools/tiffmedian.c | 902 + compat/libtiff/tools/tiffset.c | 320 + compat/libtiff/tools/tiffsplit.c | 303 + compat/libtiff/tools/ycbcr.c | 168 + compat/tclLoadAix.c | 564 + compat/tclLoadAout.c | 576 + compat/tclLoadDld.c | 96 + compat/tclLoadMac.c | 288 + compat/tclLoadNone.c | 548 + compat/tclLoadShl.c | 79 + compat/tclLoadWin.c | 199 + compat/zlib/CMakeLists.txt | 249 + compat/zlib/ChangeLog | 1472 ++ compat/zlib/FAQ | 368 + compat/zlib/INDEX | 68 + compat/zlib/Makefile | 5 + compat/zlib/Makefile.in | 288 + compat/zlib/README | 115 + compat/zlib/adler32.c | 179 + compat/zlib/amiga/Makefile.pup | 69 + compat/zlib/amiga/Makefile.sas | 68 + compat/zlib/as400/bndsrc | 215 + compat/zlib/as400/compile.clp | 110 + compat/zlib/as400/readme.txt | 115 + compat/zlib/as400/zlib.inc | 451 + compat/zlib/compress.c | 80 + compat/zlib/configure | 831 + compat/zlib/contrib/README.contrib | 78 + compat/zlib/contrib/ada/buffer_demo.adb | 106 + compat/zlib/contrib/ada/mtest.adb | 156 + compat/zlib/contrib/ada/read.adb | 156 + compat/zlib/contrib/ada/readme.txt | 65 + compat/zlib/contrib/ada/test.adb | 463 + compat/zlib/contrib/ada/zlib-streams.adb | 225 + compat/zlib/contrib/ada/zlib-streams.ads | 114 + compat/zlib/contrib/ada/zlib-thin.adb | 141 + compat/zlib/contrib/ada/zlib-thin.ads | 450 + compat/zlib/contrib/ada/zlib.adb | 701 + compat/zlib/contrib/ada/zlib.ads | 328 + compat/zlib/contrib/ada/zlib.gpr | 20 + compat/zlib/contrib/amd64/amd64-match.S | 452 + compat/zlib/contrib/asm686/README.686 | 51 + compat/zlib/contrib/asm686/match.S | 357 + compat/zlib/contrib/blast/Makefile | 8 + compat/zlib/contrib/blast/README | 4 + compat/zlib/contrib/blast/blast.c | 446 + compat/zlib/contrib/blast/blast.h | 75 + compat/zlib/contrib/blast/test.pk | Bin 0 -> 8 bytes compat/zlib/contrib/blast/test.txt | 1 + compat/zlib/contrib/delphi/ZLib.pas | 557 + compat/zlib/contrib/delphi/ZLibConst.pas | 11 + compat/zlib/contrib/delphi/readme.txt | 76 + compat/zlib/contrib/delphi/zlibd32.mak | 99 + compat/zlib/contrib/dotzlib/DotZLib.build | 33 + compat/zlib/contrib/dotzlib/DotZLib.chm | Bin 0 -> 72726 bytes compat/zlib/contrib/dotzlib/DotZLib.sln | 21 + .../zlib/contrib/dotzlib/DotZLib/AssemblyInfo.cs | 58 + .../zlib/contrib/dotzlib/DotZLib/ChecksumImpl.cs | 202 + .../zlib/contrib/dotzlib/DotZLib/CircularBuffer.cs | 83 + compat/zlib/contrib/dotzlib/DotZLib/CodecBase.cs | 198 + compat/zlib/contrib/dotzlib/DotZLib/Deflater.cs | 106 + compat/zlib/contrib/dotzlib/DotZLib/DotZLib.cs | 288 + compat/zlib/contrib/dotzlib/DotZLib/DotZLib.csproj | 141 + compat/zlib/contrib/dotzlib/DotZLib/GZipStream.cs | 301 + compat/zlib/contrib/dotzlib/DotZLib/Inflater.cs | 105 + compat/zlib/contrib/dotzlib/DotZLib/UnitTests.cs | 274 + compat/zlib/contrib/dotzlib/LICENSE_1_0.txt | 23 + compat/zlib/contrib/dotzlib/readme.txt | 58 + compat/zlib/contrib/gcc_gvmat64/gvmat64.S | 574 + compat/zlib/contrib/infback9/README | 1 + compat/zlib/contrib/infback9/infback9.c | 615 + compat/zlib/contrib/infback9/infback9.h | 37 + compat/zlib/contrib/infback9/inffix9.h | 107 + compat/zlib/contrib/infback9/inflate9.h | 47 + compat/zlib/contrib/infback9/inftree9.c | 324 + compat/zlib/contrib/infback9/inftree9.h | 61 + compat/zlib/contrib/inflate86/inffas86.c | 1157 + compat/zlib/contrib/inflate86/inffast.S | 1368 ++ compat/zlib/contrib/iostream/test.cpp | 24 + compat/zlib/contrib/iostream/zfstream.cpp | 329 + compat/zlib/contrib/iostream/zfstream.h | 128 + compat/zlib/contrib/iostream2/zstream.h | 307 + compat/zlib/contrib/iostream2/zstream_test.cpp | 25 + compat/zlib/contrib/iostream3/README | 35 + compat/zlib/contrib/iostream3/TODO | 17 + compat/zlib/contrib/iostream3/test.cc | 50 + compat/zlib/contrib/iostream3/zfstream.cc | 479 + compat/zlib/contrib/iostream3/zfstream.h | 466 + compat/zlib/contrib/masmx64/bld_ml64.bat | 2 + compat/zlib/contrib/masmx64/gvmat64.asm | 553 + compat/zlib/contrib/masmx64/inffas8664.c | 186 + compat/zlib/contrib/masmx64/inffasx64.asm | 396 + compat/zlib/contrib/masmx64/readme.txt | 31 + compat/zlib/contrib/masmx86/bld_ml32.bat | 2 + compat/zlib/contrib/masmx86/inffas32.asm | 1080 + compat/zlib/contrib/masmx86/match686.asm | 479 + compat/zlib/contrib/masmx86/readme.txt | 27 + compat/zlib/contrib/minizip/Makefile | 25 + compat/zlib/contrib/minizip/Makefile.am | 45 + compat/zlib/contrib/minizip/MiniZip64_Changes.txt | 6 + compat/zlib/contrib/minizip/MiniZip64_info.txt | 74 + compat/zlib/contrib/minizip/configure.ac | 32 + compat/zlib/contrib/minizip/crypt.h | 131 + compat/zlib/contrib/minizip/ioapi.c | 247 + compat/zlib/contrib/minizip/ioapi.h | 208 + compat/zlib/contrib/minizip/iowin32.c | 461 + compat/zlib/contrib/minizip/iowin32.h | 28 + compat/zlib/contrib/minizip/make_vms.com | 25 + compat/zlib/contrib/minizip/miniunz.c | 660 + compat/zlib/contrib/minizip/miniunzip.1 | 63 + compat/zlib/contrib/minizip/minizip.1 | 46 + compat/zlib/contrib/minizip/minizip.c | 520 + compat/zlib/contrib/minizip/minizip.pc.in | 12 + compat/zlib/contrib/minizip/mztools.c | 291 + compat/zlib/contrib/minizip/mztools.h | 37 + compat/zlib/contrib/minizip/unzip.c | 2125 ++ compat/zlib/contrib/minizip/unzip.h | 437 + compat/zlib/contrib/minizip/zip.c | 2007 ++ compat/zlib/contrib/minizip/zip.h | 362 + compat/zlib/contrib/pascal/example.pas | 599 + compat/zlib/contrib/pascal/readme.txt | 76 + compat/zlib/contrib/pascal/zlibd32.mak | 99 + compat/zlib/contrib/pascal/zlibpas.pas | 276 + compat/zlib/contrib/puff/Makefile | 42 + compat/zlib/contrib/puff/README | 63 + compat/zlib/contrib/puff/puff.c | 840 + compat/zlib/contrib/puff/puff.h | 35 + compat/zlib/contrib/puff/pufftest.c | 165 + compat/zlib/contrib/puff/zeros.raw | Bin 0 -> 2521 bytes compat/zlib/contrib/testzlib/testzlib.c | 275 + compat/zlib/contrib/testzlib/testzlib.txt | 10 + compat/zlib/contrib/untgz/Makefile | 14 + compat/zlib/contrib/untgz/Makefile.msc | 17 + compat/zlib/contrib/untgz/untgz.c | 674 + compat/zlib/contrib/vstudio/readme.txt | 65 + compat/zlib/contrib/vstudio/vc10/miniunz.vcxproj | 310 + .../contrib/vstudio/vc10/miniunz.vcxproj.filters | 22 + .../zlib/contrib/vstudio/vc10/miniunz.vcxproj.user | 3 + compat/zlib/contrib/vstudio/vc10/minizip.vcxproj | 307 + .../contrib/vstudio/vc10/minizip.vcxproj.filters | 22 + .../zlib/contrib/vstudio/vc10/minizip.vcxproj.user | 3 + compat/zlib/contrib/vstudio/vc10/testzlib.vcxproj | 420 + .../contrib/vstudio/vc10/testzlib.vcxproj.filters | 58 + .../contrib/vstudio/vc10/testzlib.vcxproj.user | 3 + .../zlib/contrib/vstudio/vc10/testzlibdll.vcxproj | 310 + .../vstudio/vc10/testzlibdll.vcxproj.filters | 22 + .../contrib/vstudio/vc10/testzlibdll.vcxproj.user | 3 + compat/zlib/contrib/vstudio/vc10/zlib.rc | 32 + compat/zlib/contrib/vstudio/vc10/zlibstat.vcxproj | 473 + .../contrib/vstudio/vc10/zlibstat.vcxproj.filters | 77 + .../contrib/vstudio/vc10/zlibstat.vcxproj.user | 3 + compat/zlib/contrib/vstudio/vc10/zlibvc.def | 143 + compat/zlib/contrib/vstudio/vc10/zlibvc.sln | 135 + compat/zlib/contrib/vstudio/vc10/zlibvc.vcxproj | 657 + .../contrib/vstudio/vc10/zlibvc.vcxproj.filters | 118 + .../zlib/contrib/vstudio/vc10/zlibvc.vcxproj.user | 3 + compat/zlib/contrib/vstudio/vc11/miniunz.vcxproj | 314 + compat/zlib/contrib/vstudio/vc11/minizip.vcxproj | 311 + compat/zlib/contrib/vstudio/vc11/testzlib.vcxproj | 426 + .../zlib/contrib/vstudio/vc11/testzlibdll.vcxproj | 314 + compat/zlib/contrib/vstudio/vc11/zlib.rc | 32 + compat/zlib/contrib/vstudio/vc11/zlibstat.vcxproj | 464 + compat/zlib/contrib/vstudio/vc11/zlibvc.def | 143 + compat/zlib/contrib/vstudio/vc11/zlibvc.sln | 117 + compat/zlib/contrib/vstudio/vc11/zlibvc.vcxproj | 688 + compat/zlib/contrib/vstudio/vc9/miniunz.vcproj | 565 + compat/zlib/contrib/vstudio/vc9/minizip.vcproj | 562 + compat/zlib/contrib/vstudio/vc9/testzlib.vcproj | 852 + compat/zlib/contrib/vstudio/vc9/testzlibdll.vcproj | 565 + compat/zlib/contrib/vstudio/vc9/zlib.rc | 32 + compat/zlib/contrib/vstudio/vc9/zlibstat.vcproj | 835 + compat/zlib/contrib/vstudio/vc9/zlibvc.def | 143 + compat/zlib/contrib/vstudio/vc9/zlibvc.sln | 144 + compat/zlib/contrib/vstudio/vc9/zlibvc.vcproj | 1156 + compat/zlib/crc32.c | 425 + compat/zlib/crc32.h | 441 + compat/zlib/deflate.c | 1967 ++ compat/zlib/deflate.h | 346 + compat/zlib/doc/algorithm.txt | 209 + compat/zlib/doc/rfc1950.txt | 619 + compat/zlib/doc/rfc1951.txt | 955 + compat/zlib/doc/rfc1952.txt | 675 + compat/zlib/doc/txtvsbin.txt | 107 + compat/zlib/examples/README.examples | 49 + compat/zlib/examples/enough.c | 572 + compat/zlib/examples/fitblk.c | 233 + compat/zlib/examples/gun.c | 702 + compat/zlib/examples/gzappend.c | 504 + compat/zlib/examples/gzjoin.c | 449 + compat/zlib/examples/gzlog.c | 1059 + compat/zlib/examples/gzlog.h | 91 + compat/zlib/examples/zlib_how.html | 545 + compat/zlib/examples/zpipe.c | 205 + compat/zlib/examples/zran.c | 409 + compat/zlib/gzclose.c | 25 + compat/zlib/gzguts.h | 209 + compat/zlib/gzlib.c | 634 + compat/zlib/gzread.c | 594 + compat/zlib/gzwrite.c | 577 + compat/zlib/infback.c | 640 + compat/zlib/inffast.c | 340 + compat/zlib/inffast.h | 11 + compat/zlib/inffixed.h | 94 + compat/zlib/inflate.c | 1512 ++ compat/zlib/inflate.h | 122 + compat/zlib/inftrees.c | 306 + compat/zlib/inftrees.h | 62 + compat/zlib/make_vms.com | 867 + compat/zlib/msdos/Makefile.bor | 115 + compat/zlib/msdos/Makefile.dj2 | 104 + compat/zlib/msdos/Makefile.emx | 69 + compat/zlib/msdos/Makefile.msc | 112 + compat/zlib/msdos/Makefile.tc | 100 + compat/zlib/nintendods/Makefile | 126 + compat/zlib/nintendods/README | 5 + compat/zlib/old/Makefile.emx | 69 + compat/zlib/old/Makefile.riscos | 151 + compat/zlib/old/README | 3 + compat/zlib/old/descrip.mms | 48 + compat/zlib/old/os2/Makefile.os2 | 136 + compat/zlib/old/os2/zlib.def | 51 + compat/zlib/old/visual-basic.txt | 160 + compat/zlib/qnx/package.qpg | 141 + compat/zlib/test/example.c | 601 + compat/zlib/test/infcover.c | 671 + compat/zlib/test/minigzip.c | 651 + compat/zlib/treebuild.xml | 116 + compat/zlib/trees.c | 1226 + compat/zlib/trees.h | 128 + compat/zlib/uncompr.c | 59 + compat/zlib/watcom/watcom_f.mak | 43 + compat/zlib/watcom/watcom_l.mak | 43 + compat/zlib/win32/DLL_FAQ.txt | 397 + compat/zlib/win32/Makefile.bor | 110 + compat/zlib/win32/Makefile.gcc | 182 + compat/zlib/win32/Makefile.msc | 163 + compat/zlib/win32/README-WIN32.txt | 103 + compat/zlib/win32/VisualC.txt | 3 + compat/zlib/win32/zlib.def | 86 + compat/zlib/win32/zlib1.rc | 40 + compat/zlib/zconf.h | 511 + compat/zlib/zconf.h.cmakein | 513 + compat/zlib/zconf.h.in | 511 + compat/zlib/zlib.3 | 151 + compat/zlib/zlib.3.pdf | Bin 0 -> 8734 bytes compat/zlib/zlib.h | 1768 ++ compat/zlib/zlib.map | 83 + compat/zlib/zlib.pc.cmakein | 13 + compat/zlib/zlib.pc.in | 13 + compat/zlib/zlib2ansi | 152 + compat/zlib/zutil.c | 324 + compat/zlib/zutil.h | 253 + configure | 14874 ++++++++++++ configure.in | 140 + demo.tcl | 4569 ++++ doc/default.css | 24 + doc/format-footer.inc | 6 + doc/format-header.inc | 30 + doc/format-middle.inc | 16 + doc/formats.htm | 212 + doc/img-bmp.man | 106 + doc/img-dted.man | 88 + doc/img-gif.man | 65 + doc/img-ico.man | 63 + doc/img-jpeg.man | 75 + doc/img-pcx.man | 67 + doc/img-pixmap.man | 98 + doc/img-png.man | 89 + doc/img-ppm.man | 100 + doc/img-ps.man | 97 + doc/img-raw.man | 175 + doc/img-sgi.man | 76 + doc/img-sun.man | 73 + doc/img-tga.man | 70 + doc/img-tiff.man | 60 + doc/img-window.man | 68 + doc/img-xbm.man | 10 + doc/img-xpm.man | 10 + doc/img.man | 103 + doc/index.htm | 80 + doc/install.htm | 201 + doc/library.htm | 68 + dted/ChangeLog | 9 + dted/Makefile.in | 514 + dted/aclocal.m4 | 10 + dted/configure | 13494 +++++++++++ dted/configure.in | 205 + dted/dted.c | 1040 + dted/readme | 2 + dted/tests/all.tcl | 24 + dted/tests/dted.test | 801 + dted/tests/e10n48.dt0 | Bin 0 -> 34162 bytes gif/ChangeLog | 32 + gif/Makefile.in | 513 + gif/README | 2 + gif/aclocal.m4 | 10 + gif/configure | 13478 +++++++++++ gif/configure.in | 199 + gif/gif.c | 1755 ++ gif/tests/all.tcl | 24 + gif/tests/folder.gif | Bin 0 -> 79 bytes gif/tests/gif.test | 43 + ico/ChangeLog | 27 + ico/Makefile.in | 513 + ico/aclocal.m4 | 10 + ico/configure | 13478 +++++++++++ ico/configure.in | 199 + ico/ico.c | 1091 + ico/readme | 2 + ico/tests/all.tcl | 24 + ico/tests/ico.test | 83 + ico/tests/img.ico | Bin 0 -> 1398 bytes init.c | 186 + jpeg/ChangeLog | 32 + jpeg/Makefile.in | 517 + jpeg/README | 2 + jpeg/aclocal.m4 | 10 + jpeg/configure | 13801 ++++++++++++ jpeg/configure.in | 208 + jpeg/jpeg.c | 1181 + jpeg/tests/all.tcl | 24 + jpeg/tests/folder.jpg | Bin 0 -> 782 bytes jpeg/tests/jpeg.test | 73 + libjpeg/ChangeLog | 20 + libjpeg/DANGER | 17 + libjpeg/Makefile.in | 490 + libjpeg/README | 18 + libjpeg/aclocal.m4 | 10 + libjpeg/configure | 12822 +++++++++++ libjpeg/configure.in | 219 + libjpeg/jerror.h | 12 + libjpeg/jpeglib.h | 12 + libjpeg/jpegtcl.c | 79 + libjpeg/jpegtcl.decls | 179 + libjpeg/jpegtcl.h | 73 + libjpeg/jpegtclConfig.sh.in | 57 + libjpeg/jpegtclDecls.h | 337 + libjpeg/jpegtclStubInit.c | 73 + libjpeg/jpegtclStubLib.c | 62 + libpng/ChangeLog | 60 + libpng/Makefile.in | 497 + libpng/aclocal.m4 | 10 + libpng/configure | 13112 +++++++++++ libpng/configure.in | 201 + libpng/png.h | 12 + libpng/pngtcl.c | 84 + libpng/pngtcl.decls | 976 + libpng/pngtcl.h | 72 + libpng/pngtclConfig.sh.in | 55 + libpng/pngtclDecls.h | 2014 ++ libpng/pngtclStubInit.c | 1297 ++ libpng/pngtclStubLib.c | 62 + libtiff/ChangeLog | 60 + libtiff/Makefile.in | 503 + libtiff/README | 20 + libtiff/aclocal.m4 | 10 + libtiff/configure | 13079 +++++++++++ libtiff/configure.in | 224 + libtiff/tiffio.h | 12 + libtiff/tifftcl.c | 112 + libtiff/tifftcl.decls | 473 + libtiff/tifftcl.h | 72 + libtiff/tifftclConfig.sh.in | 57 + libtiff/tifftclDecls.h | 900 + libtiff/tifftclStubInit.c | 244 + libtiff/tifftclStubLib.c | 58 + license.terms | 41 + msgs/de.msg | 24 + msgs/el.msg | 29 + msgs/en.msg | 24 + msgs/es.msg | 24 + msgs/fr.msg | 24 + msgs/ja.msg | 25 + msgs/nl.msg | 24 + pcx/ChangeLog | 17 + pcx/Makefile.in | 513 + pcx/aclocal.m4 | 10 + pcx/configure | 13478 +++++++++++ pcx/configure.in | 199 + pcx/pcx.c | 880 + pcx/readme | 2 + pcx/tests/all.tcl | 24 + pcx/tests/hori.pcx | Bin 0 -> 717 bytes pcx/tests/hori_bw.pcx | Bin 0 -> 298 bytes pcx/tests/hori_bwmask.pcx | Bin 0 -> 298 bytes pcx/tests/hori_grey8.pcx | Bin 0 -> 1163 bytes pcx/tests/hori_ind8.pcx | Bin 0 -> 1137 bytes pcx/tests/hori_rle.pcx | Bin 0 -> 717 bytes pcx/tests/pcx.test | 77 + pixmap/ChangeLog | 21 + pixmap/Makefile.in | 513 + pixmap/README | 2 + pixmap/aclocal.m4 | 10 + pixmap/configure | 13893 ++++++++++++ pixmap/configure.in | 201 + pixmap/pixmap.c | 1294 ++ pixmap/pixmapInt.h | 149 + pixmap/pixmapUnix.c | 275 + pixmap/pixmapWin.c | 295 + pixmap/tests/all.tcl | 24 + png/ChangeLog | 26 + png/Makefile.in | 521 + png/README | 2 + png/aclocal.m4 | 10 + png/configure | 14106 ++++++++++++ png/configure.in | 216 + png/png.c | 798 + png/tests/all.tcl | 24 + png/tests/folder.png | Bin 0 -> 226 bytes png/tests/png.test | 46 + ppm/ChangeLog | 22 + ppm/Makefile.in | 513 + ppm/aclocal.m4 | 10 + ppm/configure | 13478 +++++++++++ ppm/configure.in | 199 + ppm/ppm.c | 1163 + ppm/readme | 2 + ppm/tests/all.tcl | 24 + ppm/tests/hori_ascii.ppm | 2956 +++ ppm/tests/hori_raw.ppm | Bin 0 -> 3010 bytes ppm/tests/ppm.test | 101 + ppm/tests/teapot.ppm | 56 + ppm/tests/testimg.ppm | 4 + ps/ChangeLog | 16 + ps/Makefile.in | 513 + ps/README | 2 + ps/aclocal.m4 | 10 + ps/configure | 13480 +++++++++++ ps/configure.in | 201 + ps/ps.c | 561 + ps/tests/all.tcl | 24 + ps/tests/folder.ps | 137 + ps/tests/logo.pdf | Bin 0 -> 1154 bytes ps/tests/test.ps | 426 + raw/ChangeLog | 9 + raw/Makefile.in | 513 + raw/aclocal.m4 | 10 + raw/configure | 13495 +++++++++++ raw/configure.in | 206 + raw/raw.c | 1494 ++ raw/readme | 2 + raw/tests/all.tcl | 24 + raw/tests/folder.raw | Bin 0 -> 664 bytes raw/tests/raw.test | 53 + sgi/ChangeLog | 21 + sgi/Makefile.in | 513 + sgi/aclocal.m4 | 10 + sgi/configure | 13478 +++++++++++ sgi/configure.in | 199 + sgi/readme | 2 + sgi/sgi.c | 1793 ++ sgi/tests/all.tcl | 24 + sgi/tests/folder.rgb | Bin 0 -> 1103 bytes sgi/tests/sgi.test | 65 + sun/ChangeLog | 17 + sun/Makefile.in | 513 + sun/aclocal.m4 | 10 + sun/configure | 13478 +++++++++++ sun/configure.in | 199 + sun/readme | 2 + sun/sun.c | 1320 ++ sun/tests/all.tcl | 24 + sun/tests/folder.ras | Bin 0 -> 233 bytes sun/tests/sun.test | 58 + tclconfig/README.txt | 26 + tclconfig/img.m4 | 132 + tclconfig/install-sh | 528 + tclconfig/tcl.m4 | 4191 ++++ tests/all | 14 + tests/all.tcl | 54 + tests/bmp.test | 91 + tests/bmp4r.bmp | Bin 0 -> 876 bytes tests/bmp8r.bmp | Bin 0 -> 2226 bytes tests/defs | 278 + tests/dted.test | 803 + tests/e10n48.dt0 | Bin 0 -> 34162 bytes tests/folder.bmp | Bin 0 -> 162 bytes tests/folder.gif | Bin 0 -> 79 bytes tests/folder.jpg | Bin 0 -> 782 bytes tests/folder.png | Bin 0 -> 226 bytes tests/folder.ps | 137 + tests/folder.ras | Bin 0 -> 233 bytes tests/folder.raw | Bin 0 -> 664 bytes tests/folder.rgb | Bin 0 -> 1103 bytes tests/folder.tif | Bin 0 -> 1938 bytes tests/folder.xbm | 5 + tests/folder.xpm | 18 + tests/gif.test | 41 + tests/hori.tga | Bin 0 -> 641 bytes tests/hori_bw.pcx | Bin 0 -> 297 bytes tests/hori_raw.ppm | Bin 0 -> 3010 bytes tests/ico.test | 85 + tests/img.ico | Bin 0 -> 1398 bytes tests/jpeg.test | 75 + tests/logo.pdf | Bin 0 -> 1154 bytes tests/pcx.test | 79 + tests/png.test | 50 + tests/ppm.test | 98 + tests/raw.test | 55 + tests/sgi.test | 65 + tests/sun.test | 52 + tests/test.ps | 426 + tests/tga.test | 55 + tests/tiff.test | 54 + tests/visualtests/Readme.txt | 28 + tests/visualtests/testFrom.tcl | 116 + tests/visualtests/testFull.tcl | 129 + tests/visualtests/testSmall.tcl | 137 + tests/visualtests/testTo.tcl | 117 + tests/visualtests/utils/testGUI.tcl | 279 + tests/visualtests/utils/testImgs.tcl | 147 + tests/visualtests/utils/testReadWrite.tcl | 287 + tests/visualtests/utils/testUtil.tcl | 59 + tests/xbm.test | 29 + tests/xpm.test | 49 + tga/ChangeLog | 17 + tga/Makefile.in | 513 + tga/aclocal.m4 | 10 + tga/configure | 13479 +++++++++++ tga/configure.in | 200 + tga/readme | 2 + tga/tests/all.tcl | 24 + tga/tests/hori.tga | Bin 0 -> 642 bytes tga/tests/tga.test | 56 + tga/tga.c | 1017 + tiff/ChangeLog | 31 + tiff/Makefile.in | 525 + tiff/README | 2 + tiff/aclocal.m4 | 10 + tiff/configure | 14462 ++++++++++++ tiff/configure.in | 229 + tiff/tests/all.tcl | 24 + tiff/tests/folder.tif | Bin 0 -> 1938 bytes tiff/tests/tiff.test | 52 + tiff/tiff.c | 989 + tiff/tiffInt.h | 24 + tiff/tiffJpeg.c | 1648 ++ tiff/tiffPixar.c | 1380 ++ tiff/tiffZip.c | 412 + tkv.tcl | 178 + tools/config.guess | 1500 ++ tools/config.sub | 1608 ++ tools/genStubs.tcl | 1210 + tools/install-sh | 528 + tools/install.tcl | 141 + tools/ldAout.tcl | 240 + tools/mkinstalldirs | 32 + window/ChangeLog | 29 + window/Makefile.in | 516 + window/aclocal.m4 | 10 + window/configure | 13823 ++++++++++++ window/configure.in | 209 + window/readme | 2 + window/tests/all.tcl | 24 + window/window.c | 467 + xbm/ChangeLog | 17 + xbm/Makefile.in | 513 + xbm/aclocal.m4 | 10 + xbm/configure | 13478 +++++++++++ xbm/configure.in | 199 + xbm/readme | 2 + xbm/tests/all.tcl | 24 + xbm/tests/folder.xbm | 5 + xbm/tests/xbm.test | 26 + xbm/xbm.c | 669 + xpm/ChangeLog | 17 + xpm/Makefile.in | 513 + xpm/aclocal.m4 | 10 + xpm/configure | 13478 +++++++++++ xpm/configure.in | 199 + xpm/readme | 2 + xpm/tests/all.tcl | 24 + xpm/tests/folder.xpm | 18 + xpm/tests/xpm.test | 46 + xpm/xpm.c | 1032 + zlib/ChangeLog | 31 + zlib/Makefile.in | 490 + zlib/aclocal.m4 | 10 + zlib/configure | 12922 +++++++++++ zlib/configure.in | 181 + zlib/zlib.h | 12 + zlib/zlibtcl.c | 84 + zlib/zlibtcl.decls | 168 + zlib/zlibtcl.h | 68 + zlib/zlibtclConfig.sh.in | 57 + zlib/zlibtclDecls.h | 305 + zlib/zlibtclStubInit.c | 74 + zlib/zlibtclStubLib.c | 62 + 1731 files changed, 950002 insertions(+) create mode 100755 ANNOUNCE create mode 100755 ChangeLog create mode 100755 Makefile.in create mode 100755 README create mode 100755 Reorganization.Notes.txt create mode 100755 aclocal.m4 create mode 100755 base/ChangeLog create mode 100755 base/Makefile.in create mode 100755 base/README create mode 100755 base/aclocal.m4 create mode 100755 base/configure create mode 100755 base/configure.in create mode 100755 base/pkgIndex.tcl.in create mode 100755 base/tkimg.c create mode 100755 base/tkimg.decls create mode 100755 base/tkimg.h create mode 100755 base/tkimgConfig.sh.in create mode 100755 base/tkimgDecls.h create mode 100755 base/tkimgIO.c create mode 100755 base/tkimgPPB.c create mode 100755 base/tkimgStubInit.c create mode 100755 base/tkimgStubLib.c create mode 100755 base/tkimgUtils.c create mode 100755 bmp/ChangeLog create mode 100755 bmp/Makefile.in create mode 100755 bmp/README create mode 100755 bmp/aclocal.m4 create mode 100755 bmp/bmp.c create mode 100755 bmp/bmp.txt create mode 100755 bmp/configure create mode 100755 bmp/configure.in create mode 100755 bmp/tests/WizImg.bmp create mode 100755 bmp/tests/all.tcl create mode 100755 bmp/tests/bmp.test create mode 100755 bmp/tests/bmp4r.bmp create mode 100755 bmp/tests/bmp8r.bmp create mode 100755 bmp/tests/folder.bmp create mode 100755 bmp/tests/img.bmp create mode 100755 changes create mode 100755 compat/dlfcn.h create mode 100755 compat/dllEntry.c create mode 100755 compat/libjpeg/Makefile.am create mode 100755 compat/libjpeg/Makefile.in create mode 100755 compat/libjpeg/README create mode 100755 compat/libjpeg/aclocal.m4 create mode 100755 compat/libjpeg/ar-lib create mode 100755 compat/libjpeg/cderror.h create mode 100755 compat/libjpeg/cdjpeg.c create mode 100755 compat/libjpeg/cdjpeg.h create mode 100755 compat/libjpeg/change.log create mode 100755 compat/libjpeg/cjpeg.1 create mode 100755 compat/libjpeg/cjpeg.c create mode 100755 compat/libjpeg/ckconfig.c create mode 100755 compat/libjpeg/coderules.txt create mode 100755 compat/libjpeg/compile create mode 100755 compat/libjpeg/config.guess create mode 100755 compat/libjpeg/config.sub create mode 100755 compat/libjpeg/configure create mode 100755 compat/libjpeg/configure.ac create mode 100755 compat/libjpeg/depcomp create mode 100755 compat/libjpeg/djpeg.1 create mode 100755 compat/libjpeg/djpeg.c create mode 100755 compat/libjpeg/example.c create mode 100755 compat/libjpeg/filelist.txt create mode 100755 compat/libjpeg/install-sh create mode 100755 compat/libjpeg/install.txt create mode 100755 compat/libjpeg/jaricom.c create mode 100755 compat/libjpeg/jcapimin.c create mode 100755 compat/libjpeg/jcapistd.c create mode 100755 compat/libjpeg/jcarith.c create mode 100755 compat/libjpeg/jccoefct.c create mode 100755 compat/libjpeg/jccolor.c create mode 100755 compat/libjpeg/jcdctmgr.c create mode 100755 compat/libjpeg/jchuff.c create mode 100755 compat/libjpeg/jcinit.c create mode 100755 compat/libjpeg/jcmainct.c create mode 100755 compat/libjpeg/jcmarker.c create mode 100755 compat/libjpeg/jcmaster.c create mode 100755 compat/libjpeg/jcomapi.c create mode 100755 compat/libjpeg/jconfig.bcc create mode 100755 compat/libjpeg/jconfig.cfg create mode 100755 compat/libjpeg/jconfig.dj create mode 100755 compat/libjpeg/jconfig.mac create mode 100755 compat/libjpeg/jconfig.manx create mode 100755 compat/libjpeg/jconfig.mc6 create mode 100755 compat/libjpeg/jconfig.sas create mode 100755 compat/libjpeg/jconfig.st create mode 100755 compat/libjpeg/jconfig.txt create mode 100755 compat/libjpeg/jconfig.vc create mode 100755 compat/libjpeg/jconfig.vms create mode 100755 compat/libjpeg/jconfig.wat create mode 100755 compat/libjpeg/jcparam.c create mode 100755 compat/libjpeg/jcprepct.c create mode 100755 compat/libjpeg/jcsample.c create mode 100755 compat/libjpeg/jctrans.c create mode 100755 compat/libjpeg/jdapimin.c create mode 100755 compat/libjpeg/jdapistd.c create mode 100755 compat/libjpeg/jdarith.c create mode 100755 compat/libjpeg/jdatadst.c create mode 100755 compat/libjpeg/jdatasrc.c create mode 100755 compat/libjpeg/jdcoefct.c create mode 100755 compat/libjpeg/jdcolor.c create mode 100755 compat/libjpeg/jdct.h create mode 100755 compat/libjpeg/jddctmgr.c create mode 100755 compat/libjpeg/jdhuff.c create mode 100755 compat/libjpeg/jdinput.c create mode 100755 compat/libjpeg/jdmainct.c create mode 100755 compat/libjpeg/jdmarker.c create mode 100755 compat/libjpeg/jdmaster.c create mode 100755 compat/libjpeg/jdmerge.c create mode 100755 compat/libjpeg/jdpostct.c create mode 100755 compat/libjpeg/jdsample.c create mode 100755 compat/libjpeg/jdtrans.c create mode 100755 compat/libjpeg/jerror.c create mode 100755 compat/libjpeg/jerror.h create mode 100755 compat/libjpeg/jfdctflt.c create mode 100755 compat/libjpeg/jfdctfst.c create mode 100755 compat/libjpeg/jfdctint.c create mode 100755 compat/libjpeg/jidctflt.c create mode 100755 compat/libjpeg/jidctfst.c create mode 100755 compat/libjpeg/jidctint.c create mode 100755 compat/libjpeg/jinclude.h create mode 100755 compat/libjpeg/jmemansi.c create mode 100755 compat/libjpeg/jmemdos.c create mode 100755 compat/libjpeg/jmemdosa.asm create mode 100755 compat/libjpeg/jmemmac.c create mode 100755 compat/libjpeg/jmemmgr.c create mode 100755 compat/libjpeg/jmemname.c create mode 100755 compat/libjpeg/jmemnobs.c create mode 100755 compat/libjpeg/jmemsys.h create mode 100755 compat/libjpeg/jmorecfg.h create mode 100755 compat/libjpeg/jpegint.h create mode 100755 compat/libjpeg/jpeglib.h create mode 100755 compat/libjpeg/jpegtran.1 create mode 100755 compat/libjpeg/jpegtran.c create mode 100755 compat/libjpeg/jquant1.c create mode 100755 compat/libjpeg/jquant2.c create mode 100755 compat/libjpeg/jutils.c create mode 100755 compat/libjpeg/jversion.h create mode 100755 compat/libjpeg/libjpeg.map create mode 100755 compat/libjpeg/libjpeg.txt create mode 100755 compat/libjpeg/ltmain.sh create mode 100755 compat/libjpeg/makcjpeg.st create mode 100755 compat/libjpeg/makdjpeg.st create mode 100755 compat/libjpeg/makeadsw.vc6 create mode 100755 compat/libjpeg/makeasln.v10 create mode 100755 compat/libjpeg/makecdep.vc6 create mode 100755 compat/libjpeg/makecdsp.vc6 create mode 100755 compat/libjpeg/makecfil.v10 create mode 100755 compat/libjpeg/makecmak.vc6 create mode 100755 compat/libjpeg/makecvcx.v10 create mode 100755 compat/libjpeg/makeddep.vc6 create mode 100755 compat/libjpeg/makeddsp.vc6 create mode 100755 compat/libjpeg/makedfil.v10 create mode 100755 compat/libjpeg/makedmak.vc6 create mode 100755 compat/libjpeg/makedvcx.v10 create mode 100755 compat/libjpeg/makefile.ansi create mode 100755 compat/libjpeg/makefile.b32 create mode 100755 compat/libjpeg/makefile.bcc create mode 100755 compat/libjpeg/makefile.dj create mode 100755 compat/libjpeg/makefile.manx create mode 100755 compat/libjpeg/makefile.mc6 create mode 100755 compat/libjpeg/makefile.mms create mode 100755 compat/libjpeg/makefile.sas create mode 100755 compat/libjpeg/makefile.unix create mode 100755 compat/libjpeg/makefile.vc create mode 100755 compat/libjpeg/makefile.vms create mode 100755 compat/libjpeg/makefile.wat create mode 100755 compat/libjpeg/makejdep.vc6 create mode 100755 compat/libjpeg/makejdsp.vc6 create mode 100755 compat/libjpeg/makejdsw.vc6 create mode 100755 compat/libjpeg/makejfil.v10 create mode 100755 compat/libjpeg/makejmak.vc6 create mode 100755 compat/libjpeg/makejsln.v10 create mode 100755 compat/libjpeg/makejvcx.v10 create mode 100755 compat/libjpeg/makeproj.mac create mode 100755 compat/libjpeg/makerdep.vc6 create mode 100755 compat/libjpeg/makerdsp.vc6 create mode 100755 compat/libjpeg/makerfil.v10 create mode 100755 compat/libjpeg/makermak.vc6 create mode 100755 compat/libjpeg/makervcx.v10 create mode 100755 compat/libjpeg/maketdep.vc6 create mode 100755 compat/libjpeg/maketdsp.vc6 create mode 100755 compat/libjpeg/maketfil.v10 create mode 100755 compat/libjpeg/maketmak.vc6 create mode 100755 compat/libjpeg/maketvcx.v10 create mode 100755 compat/libjpeg/makewdep.vc6 create mode 100755 compat/libjpeg/makewdsp.vc6 create mode 100755 compat/libjpeg/makewfil.v10 create mode 100755 compat/libjpeg/makewmak.vc6 create mode 100755 compat/libjpeg/makewvcx.v10 create mode 100755 compat/libjpeg/makljpeg.st create mode 100755 compat/libjpeg/maktjpeg.st create mode 100755 compat/libjpeg/makvms.opt create mode 100755 compat/libjpeg/missing create mode 100755 compat/libjpeg/rdbmp.c create mode 100755 compat/libjpeg/rdcolmap.c create mode 100755 compat/libjpeg/rdgif.c create mode 100755 compat/libjpeg/rdjpgcom.1 create mode 100755 compat/libjpeg/rdjpgcom.c create mode 100755 compat/libjpeg/rdppm.c create mode 100755 compat/libjpeg/rdrle.c create mode 100755 compat/libjpeg/rdswitch.c create mode 100755 compat/libjpeg/rdtarga.c create mode 100755 compat/libjpeg/structure.txt create mode 100755 compat/libjpeg/testimg.bmp create mode 100755 compat/libjpeg/testimg.jpg create mode 100755 compat/libjpeg/testimg.ppm create mode 100755 compat/libjpeg/testimgp.jpg create mode 100755 compat/libjpeg/testorig.jpg create mode 100755 compat/libjpeg/testprog.jpg create mode 100755 compat/libjpeg/transupp.c create mode 100755 compat/libjpeg/transupp.h create mode 100755 compat/libjpeg/usage.txt create mode 100755 compat/libjpeg/wizard.txt create mode 100755 compat/libjpeg/wrbmp.c create mode 100755 compat/libjpeg/wrgif.c create mode 100755 compat/libjpeg/wrjpgcom.1 create mode 100755 compat/libjpeg/wrjpgcom.c create mode 100755 compat/libjpeg/wrppm.c create mode 100755 compat/libjpeg/wrrle.c create mode 100755 compat/libjpeg/wrtarga.c create mode 100755 compat/libpng/ANNOUNCE create mode 100755 compat/libpng/CHANGES create mode 100755 compat/libpng/CMakeLists.txt create mode 100755 compat/libpng/INSTALL create mode 100755 compat/libpng/LICENSE create mode 100755 compat/libpng/Makefile.am create mode 100755 compat/libpng/Makefile.in create mode 100755 compat/libpng/README create mode 100755 compat/libpng/TODO create mode 100755 compat/libpng/aclocal.m4 create mode 100755 compat/libpng/arm/arm_init.c create mode 100755 compat/libpng/arm/filter_neon.S create mode 100755 compat/libpng/arm/filter_neon_intrinsics.c create mode 100755 compat/libpng/autogen.sh create mode 100755 compat/libpng/compile create mode 100755 compat/libpng/config.guess create mode 100755 compat/libpng/config.h.in create mode 100755 compat/libpng/config.sub create mode 100755 compat/libpng/configure create mode 100755 compat/libpng/configure.ac create mode 100755 compat/libpng/contrib/README.txt create mode 100755 compat/libpng/contrib/arm-neon/README create mode 100755 compat/libpng/contrib/arm-neon/android-ndk.c create mode 100755 compat/libpng/contrib/arm-neon/linux-auxv.c create mode 100755 compat/libpng/contrib/arm-neon/linux.c create mode 100755 compat/libpng/contrib/conftest/README create mode 100755 compat/libpng/contrib/conftest/read.dfa create mode 100755 compat/libpng/contrib/conftest/s_read.dfa create mode 100755 compat/libpng/contrib/conftest/s_write.dfa create mode 100755 compat/libpng/contrib/conftest/simple.dfa create mode 100755 compat/libpng/contrib/conftest/write.dfa create mode 100755 compat/libpng/contrib/examples/README.txt create mode 100755 compat/libpng/contrib/examples/iccfrompng.c create mode 100755 compat/libpng/contrib/examples/pngpixel.c create mode 100755 compat/libpng/contrib/examples/pngtopng.c create mode 100755 compat/libpng/contrib/examples/simpleover.c create mode 100755 compat/libpng/contrib/gregbook/COPYING create mode 100755 compat/libpng/contrib/gregbook/LICENSE create mode 100755 compat/libpng/contrib/gregbook/Makefile.mingw32 create mode 100755 compat/libpng/contrib/gregbook/Makefile.sgi create mode 100755 compat/libpng/contrib/gregbook/Makefile.unx create mode 100755 compat/libpng/contrib/gregbook/Makefile.w32 create mode 100755 compat/libpng/contrib/gregbook/README create mode 100755 compat/libpng/contrib/gregbook/makevms.com create mode 100755 compat/libpng/contrib/gregbook/readpng.c create mode 100755 compat/libpng/contrib/gregbook/readpng.h create mode 100755 compat/libpng/contrib/gregbook/readpng2.c create mode 100755 compat/libpng/contrib/gregbook/readpng2.h create mode 100755 compat/libpng/contrib/gregbook/readppm.c create mode 100755 compat/libpng/contrib/gregbook/rpng-win.c create mode 100755 compat/libpng/contrib/gregbook/rpng-x.c create mode 100755 compat/libpng/contrib/gregbook/rpng2-win.c create mode 100755 compat/libpng/contrib/gregbook/rpng2-x.c create mode 100755 compat/libpng/contrib/gregbook/toucan.png create mode 100755 compat/libpng/contrib/gregbook/wpng.c create mode 100755 compat/libpng/contrib/gregbook/writepng.c create mode 100755 compat/libpng/contrib/gregbook/writepng.h create mode 100755 compat/libpng/contrib/libtests/fakepng.c create mode 100755 compat/libpng/contrib/libtests/gentests.sh create mode 100755 compat/libpng/contrib/libtests/makepng.c create mode 100755 compat/libpng/contrib/libtests/pngimage.c create mode 100755 compat/libpng/contrib/libtests/pngstest-errors.h create mode 100755 compat/libpng/contrib/libtests/pngstest.c create mode 100755 compat/libpng/contrib/libtests/pngunknown.c create mode 100755 compat/libpng/contrib/libtests/pngvalid.c create mode 100755 compat/libpng/contrib/libtests/readpng.c create mode 100755 compat/libpng/contrib/libtests/tarith.c create mode 100755 compat/libpng/contrib/libtests/timepng.c create mode 100755 compat/libpng/contrib/pngminim/README create mode 100755 compat/libpng/contrib/pngminim/decoder/README create mode 100755 compat/libpng/contrib/pngminim/decoder/makefile create mode 100755 compat/libpng/contrib/pngminim/decoder/pngusr.dfa create mode 100755 compat/libpng/contrib/pngminim/decoder/pngusr.h create mode 100755 compat/libpng/contrib/pngminim/encoder/README create mode 100755 compat/libpng/contrib/pngminim/encoder/makefile create mode 100755 compat/libpng/contrib/pngminim/encoder/pngusr.dfa create mode 100755 compat/libpng/contrib/pngminim/encoder/pngusr.h create mode 100755 compat/libpng/contrib/pngminim/preader/README create mode 100755 compat/libpng/contrib/pngminim/preader/makefile create mode 100755 compat/libpng/contrib/pngminim/preader/pngusr.dfa create mode 100755 compat/libpng/contrib/pngminim/preader/pngusr.h create mode 100755 compat/libpng/contrib/pngminus/README create mode 100755 compat/libpng/contrib/pngminus/makefile.std create mode 100755 compat/libpng/contrib/pngminus/makefile.tc3 create mode 100755 compat/libpng/contrib/pngminus/makevms.com create mode 100755 compat/libpng/contrib/pngminus/png2pnm.bat create mode 100755 compat/libpng/contrib/pngminus/png2pnm.c create mode 100755 compat/libpng/contrib/pngminus/png2pnm.sh create mode 100755 compat/libpng/contrib/pngminus/pngminus.bat create mode 100755 compat/libpng/contrib/pngminus/pngminus.sh create mode 100755 compat/libpng/contrib/pngminus/pnm2png.bat create mode 100755 compat/libpng/contrib/pngminus/pnm2png.c create mode 100755 compat/libpng/contrib/pngminus/pnm2png.sh create mode 100755 compat/libpng/contrib/pngsuite/README create mode 100755 compat/libpng/contrib/pngsuite/basn0g01.png create mode 100755 compat/libpng/contrib/pngsuite/basn0g02.png create mode 100755 compat/libpng/contrib/pngsuite/basn0g04.png create mode 100755 compat/libpng/contrib/pngsuite/basn0g08.png create mode 100755 compat/libpng/contrib/pngsuite/basn0g16.png create mode 100755 compat/libpng/contrib/pngsuite/basn2c08.png create mode 100755 compat/libpng/contrib/pngsuite/basn2c16.png create mode 100755 compat/libpng/contrib/pngsuite/basn3p01.png create mode 100755 compat/libpng/contrib/pngsuite/basn3p02.png create mode 100755 compat/libpng/contrib/pngsuite/basn3p04.png create mode 100755 compat/libpng/contrib/pngsuite/basn3p08.png create mode 100755 compat/libpng/contrib/pngsuite/basn4a08.png create mode 100755 compat/libpng/contrib/pngsuite/basn4a16.png create mode 100755 compat/libpng/contrib/pngsuite/basn6a08.png create mode 100755 compat/libpng/contrib/pngsuite/basn6a16.png create mode 100755 compat/libpng/contrib/pngsuite/ftbbn0g01.png create mode 100755 compat/libpng/contrib/pngsuite/ftbbn0g02.png create mode 100755 compat/libpng/contrib/pngsuite/ftbbn0g04.png create mode 100755 compat/libpng/contrib/pngsuite/ftbbn2c16.png create mode 100755 compat/libpng/contrib/pngsuite/ftbbn3p08.png create mode 100755 compat/libpng/contrib/pngsuite/ftbgn2c16.png create mode 100755 compat/libpng/contrib/pngsuite/ftbgn3p08.png create mode 100755 compat/libpng/contrib/pngsuite/ftbrn2c08.png create mode 100755 compat/libpng/contrib/pngsuite/ftbwn0g16.png create mode 100755 compat/libpng/contrib/pngsuite/ftbwn3p08.png create mode 100755 compat/libpng/contrib/pngsuite/ftbyn3p08.png create mode 100755 compat/libpng/contrib/pngsuite/ftp0n0g08.png create mode 100755 compat/libpng/contrib/pngsuite/ftp0n2c08.png create mode 100755 compat/libpng/contrib/pngsuite/ftp0n3p08.png create mode 100755 compat/libpng/contrib/pngsuite/ftp1n3p08.png create mode 100755 compat/libpng/contrib/testpngs/gray-1-1.8-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/gray-1-1.8.png create mode 100755 compat/libpng/contrib/testpngs/gray-1-linear-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/gray-1-linear.png create mode 100755 compat/libpng/contrib/testpngs/gray-1-sRGB-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/gray-1-sRGB.png create mode 100755 compat/libpng/contrib/testpngs/gray-1-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/gray-1.png create mode 100755 compat/libpng/contrib/testpngs/gray-16-1.8-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/gray-16-1.8.png create mode 100755 compat/libpng/contrib/testpngs/gray-16-linear-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/gray-16-linear.png create mode 100755 compat/libpng/contrib/testpngs/gray-16-sRGB-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/gray-16-sRGB.png create mode 100755 compat/libpng/contrib/testpngs/gray-16-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/gray-16.png create mode 100755 compat/libpng/contrib/testpngs/gray-2-1.8-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/gray-2-1.8.png create mode 100755 compat/libpng/contrib/testpngs/gray-2-linear-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/gray-2-linear.png create mode 100755 compat/libpng/contrib/testpngs/gray-2-sRGB-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/gray-2-sRGB.png create mode 100755 compat/libpng/contrib/testpngs/gray-2-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/gray-2.png create mode 100755 compat/libpng/contrib/testpngs/gray-4-1.8-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/gray-4-1.8.png create mode 100755 compat/libpng/contrib/testpngs/gray-4-linear-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/gray-4-linear.png create mode 100755 compat/libpng/contrib/testpngs/gray-4-sRGB-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/gray-4-sRGB.png create mode 100755 compat/libpng/contrib/testpngs/gray-4-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/gray-4.png create mode 100755 compat/libpng/contrib/testpngs/gray-8-1.8-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/gray-8-1.8.png create mode 100755 compat/libpng/contrib/testpngs/gray-8-linear-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/gray-8-linear.png create mode 100755 compat/libpng/contrib/testpngs/gray-8-sRGB-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/gray-8-sRGB.png create mode 100755 compat/libpng/contrib/testpngs/gray-8-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/gray-8.png create mode 100755 compat/libpng/contrib/testpngs/gray-alpha-16-1.8.png create mode 100755 compat/libpng/contrib/testpngs/gray-alpha-16-linear.png create mode 100755 compat/libpng/contrib/testpngs/gray-alpha-16-sRGB.png create mode 100755 compat/libpng/contrib/testpngs/gray-alpha-16.png create mode 100755 compat/libpng/contrib/testpngs/gray-alpha-8-1.8.png create mode 100755 compat/libpng/contrib/testpngs/gray-alpha-8-linear.png create mode 100755 compat/libpng/contrib/testpngs/gray-alpha-8-sRGB.png create mode 100755 compat/libpng/contrib/testpngs/gray-alpha-8.png create mode 100755 compat/libpng/contrib/testpngs/makepngs.sh create mode 100755 compat/libpng/contrib/testpngs/palette-1-1.8-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/palette-1-1.8.png create mode 100755 compat/libpng/contrib/testpngs/palette-1-linear-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/palette-1-linear.png create mode 100755 compat/libpng/contrib/testpngs/palette-1-sRGB-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/palette-1-sRGB.png create mode 100755 compat/libpng/contrib/testpngs/palette-1-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/palette-1.png create mode 100755 compat/libpng/contrib/testpngs/palette-2-1.8-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/palette-2-1.8.png create mode 100755 compat/libpng/contrib/testpngs/palette-2-linear-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/palette-2-linear.png create mode 100755 compat/libpng/contrib/testpngs/palette-2-sRGB-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/palette-2-sRGB.png create mode 100755 compat/libpng/contrib/testpngs/palette-2-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/palette-2.png create mode 100755 compat/libpng/contrib/testpngs/palette-4-1.8-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/palette-4-1.8.png create mode 100755 compat/libpng/contrib/testpngs/palette-4-linear-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/palette-4-linear.png create mode 100755 compat/libpng/contrib/testpngs/palette-4-sRGB-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/palette-4-sRGB.png create mode 100755 compat/libpng/contrib/testpngs/palette-4-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/palette-4.png create mode 100755 compat/libpng/contrib/testpngs/palette-8-1.8-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/palette-8-1.8.png create mode 100755 compat/libpng/contrib/testpngs/palette-8-linear-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/palette-8-linear.png create mode 100755 compat/libpng/contrib/testpngs/palette-8-sRGB-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/palette-8-sRGB.png create mode 100755 compat/libpng/contrib/testpngs/palette-8-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/palette-8.png create mode 100755 compat/libpng/contrib/testpngs/rgb-16-1.8-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/rgb-16-1.8.png create mode 100755 compat/libpng/contrib/testpngs/rgb-16-linear-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/rgb-16-linear.png create mode 100755 compat/libpng/contrib/testpngs/rgb-16-sRGB-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/rgb-16-sRGB.png create mode 100755 compat/libpng/contrib/testpngs/rgb-16-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/rgb-16.png create mode 100755 compat/libpng/contrib/testpngs/rgb-8-1.8-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/rgb-8-1.8.png create mode 100755 compat/libpng/contrib/testpngs/rgb-8-linear-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/rgb-8-linear.png create mode 100755 compat/libpng/contrib/testpngs/rgb-8-sRGB-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/rgb-8-sRGB.png create mode 100755 compat/libpng/contrib/testpngs/rgb-8-tRNS.png create mode 100755 compat/libpng/contrib/testpngs/rgb-8.png create mode 100755 compat/libpng/contrib/testpngs/rgb-alpha-16-1.8.png create mode 100755 compat/libpng/contrib/testpngs/rgb-alpha-16-linear.png create mode 100755 compat/libpng/contrib/testpngs/rgb-alpha-16-sRGB.png create mode 100755 compat/libpng/contrib/testpngs/rgb-alpha-16.png create mode 100755 compat/libpng/contrib/testpngs/rgb-alpha-8-1.8.png create mode 100755 compat/libpng/contrib/testpngs/rgb-alpha-8-linear.png create mode 100755 compat/libpng/contrib/testpngs/rgb-alpha-8-sRGB.png create mode 100755 compat/libpng/contrib/testpngs/rgb-alpha-8.png create mode 100755 compat/libpng/contrib/tools/README.txt create mode 100755 compat/libpng/contrib/tools/checksum-icc.c create mode 100755 compat/libpng/contrib/tools/chkfmt create mode 100755 compat/libpng/contrib/tools/cvtcolor.c create mode 100755 compat/libpng/contrib/tools/genpng.c create mode 100755 compat/libpng/contrib/tools/intgamma.sh create mode 100755 compat/libpng/contrib/tools/makesRGB.c create mode 100755 compat/libpng/contrib/tools/png-fix-itxt.c create mode 100755 compat/libpng/contrib/tools/pngfix.c create mode 100755 compat/libpng/contrib/tools/sRGB.h create mode 100755 compat/libpng/contrib/visupng/PngFile.c create mode 100755 compat/libpng/contrib/visupng/PngFile.h create mode 100755 compat/libpng/contrib/visupng/README.txt create mode 100755 compat/libpng/contrib/visupng/VisualPng.c create mode 100755 compat/libpng/contrib/visupng/VisualPng.dsp create mode 100755 compat/libpng/contrib/visupng/VisualPng.dsw create mode 100755 compat/libpng/contrib/visupng/VisualPng.ico create mode 100755 compat/libpng/contrib/visupng/VisualPng.png create mode 100755 compat/libpng/contrib/visupng/VisualPng.rc create mode 100755 compat/libpng/contrib/visupng/cexcept.h create mode 100755 compat/libpng/contrib/visupng/resource.h create mode 100755 compat/libpng/depcomp create mode 100755 compat/libpng/example.c create mode 100755 compat/libpng/install-sh create mode 100755 compat/libpng/libpng-config.in create mode 100755 compat/libpng/libpng-manual.txt create mode 100755 compat/libpng/libpng.3 create mode 100755 compat/libpng/libpng.pc.in create mode 100755 compat/libpng/libpngpf.3 create mode 100755 compat/libpng/ltmain.sh create mode 100755 compat/libpng/missing create mode 100755 compat/libpng/png.5 create mode 100755 compat/libpng/png.c create mode 100755 compat/libpng/png.h create mode 100755 compat/libpng/pngbar.jpg create mode 100755 compat/libpng/pngbar.png create mode 100755 compat/libpng/pngconf.h create mode 100755 compat/libpng/pngdebug.h create mode 100755 compat/libpng/pngerror.c create mode 100755 compat/libpng/pngget.c create mode 100755 compat/libpng/pnginfo.h create mode 100755 compat/libpng/pngmem.c create mode 100755 compat/libpng/pngnow.png create mode 100755 compat/libpng/pngpread.c create mode 100755 compat/libpng/pngpriv.h create mode 100755 compat/libpng/pngread.c create mode 100755 compat/libpng/pngrio.c create mode 100755 compat/libpng/pngrtran.c create mode 100755 compat/libpng/pngrutil.c create mode 100755 compat/libpng/pngset.c create mode 100755 compat/libpng/pngstruct.h create mode 100755 compat/libpng/pngtest.c create mode 100755 compat/libpng/pngtest.png create mode 100755 compat/libpng/pngtrans.c create mode 100755 compat/libpng/pngusr.dfa create mode 100755 compat/libpng/pngwio.c create mode 100755 compat/libpng/pngwrite.c create mode 100755 compat/libpng/pngwtran.c create mode 100755 compat/libpng/pngwutil.c create mode 100755 compat/libpng/projects/owatcom/libpng.tgt create mode 100755 compat/libpng/projects/owatcom/libpng.wpj create mode 100755 compat/libpng/projects/owatcom/pngconfig.mak create mode 100755 compat/libpng/projects/owatcom/pngstest.tgt create mode 100755 compat/libpng/projects/owatcom/pngtest.tgt create mode 100755 compat/libpng/projects/owatcom/pngvalid.tgt create mode 100755 compat/libpng/projects/visualc71/PRJ0041.mak create mode 100755 compat/libpng/projects/visualc71/README.txt create mode 100755 compat/libpng/projects/visualc71/README_zlib.txt create mode 100755 compat/libpng/projects/visualc71/libpng.sln create mode 100755 compat/libpng/projects/visualc71/libpng.vcproj create mode 100755 compat/libpng/projects/visualc71/pngtest.vcproj create mode 100755 compat/libpng/projects/visualc71/zlib.vcproj create mode 100755 compat/libpng/projects/vstudio/README.txt create mode 100755 compat/libpng/projects/vstudio/libpng/libpng.vcxproj create mode 100755 compat/libpng/projects/vstudio/pnglibconf/pnglibconf.vcxproj create mode 100755 compat/libpng/projects/vstudio/pngstest/pngstest.vcxproj create mode 100755 compat/libpng/projects/vstudio/pngtest/pngtest.vcxproj create mode 100755 compat/libpng/projects/vstudio/pngunknown/pngunknown.vcxproj create mode 100755 compat/libpng/projects/vstudio/pngvalid/pngvalid.vcxproj create mode 100755 compat/libpng/projects/vstudio/vstudio.sln create mode 100755 compat/libpng/projects/vstudio/zlib.props create mode 100755 compat/libpng/projects/vstudio/zlib/zlib.vcxproj create mode 100755 compat/libpng/scripts/README.txt create mode 100755 compat/libpng/scripts/SCOPTIONS.ppc create mode 100755 compat/libpng/scripts/checksym.awk create mode 100755 compat/libpng/scripts/def.c create mode 100755 compat/libpng/scripts/descrip.mms create mode 100755 compat/libpng/scripts/dfn.awk create mode 100755 compat/libpng/scripts/intprefix.c create mode 100755 compat/libpng/scripts/libpng-config-body.in create mode 100755 compat/libpng/scripts/libpng-config-head.in create mode 100755 compat/libpng/scripts/libpng.pc.in create mode 100755 compat/libpng/scripts/libtool.m4 create mode 100755 compat/libpng/scripts/ltoptions.m4 create mode 100755 compat/libpng/scripts/ltsugar.m4 create mode 100755 compat/libpng/scripts/ltversion.m4 create mode 100755 compat/libpng/scripts/lt~obsolete.m4 create mode 100755 compat/libpng/scripts/macro.lst create mode 100755 compat/libpng/scripts/makefile.32sunu create mode 100755 compat/libpng/scripts/makefile.64sunu create mode 100755 compat/libpng/scripts/makefile.acorn create mode 100755 compat/libpng/scripts/makefile.aix create mode 100755 compat/libpng/scripts/makefile.amiga create mode 100755 compat/libpng/scripts/makefile.atari create mode 100755 compat/libpng/scripts/makefile.bc32 create mode 100755 compat/libpng/scripts/makefile.beos create mode 100755 compat/libpng/scripts/makefile.bor create mode 100755 compat/libpng/scripts/makefile.cegcc create mode 100755 compat/libpng/scripts/makefile.darwin create mode 100755 compat/libpng/scripts/makefile.dec create mode 100755 compat/libpng/scripts/makefile.dj2 create mode 100755 compat/libpng/scripts/makefile.freebsd create mode 100755 compat/libpng/scripts/makefile.gcc create mode 100755 compat/libpng/scripts/makefile.hp64 create mode 100755 compat/libpng/scripts/makefile.hpgcc create mode 100755 compat/libpng/scripts/makefile.hpux create mode 100755 compat/libpng/scripts/makefile.ibmc create mode 100755 compat/libpng/scripts/makefile.intel create mode 100755 compat/libpng/scripts/makefile.knr create mode 100755 compat/libpng/scripts/makefile.linux create mode 100755 compat/libpng/scripts/makefile.mips create mode 100755 compat/libpng/scripts/makefile.msc create mode 100755 compat/libpng/scripts/makefile.msys create mode 100755 compat/libpng/scripts/makefile.ne12bsd create mode 100755 compat/libpng/scripts/makefile.netbsd create mode 100755 compat/libpng/scripts/makefile.openbsd create mode 100755 compat/libpng/scripts/makefile.sco create mode 100755 compat/libpng/scripts/makefile.sggcc create mode 100755 compat/libpng/scripts/makefile.sgi create mode 100755 compat/libpng/scripts/makefile.so9 create mode 100755 compat/libpng/scripts/makefile.solaris create mode 100755 compat/libpng/scripts/makefile.solaris-x86 create mode 100755 compat/libpng/scripts/makefile.std create mode 100755 compat/libpng/scripts/makefile.sunos create mode 100755 compat/libpng/scripts/makefile.tc3 create mode 100755 compat/libpng/scripts/makefile.vcwin32 create mode 100755 compat/libpng/scripts/makevms.com create mode 100755 compat/libpng/scripts/options.awk create mode 100755 compat/libpng/scripts/pnglibconf.dfa create mode 100755 compat/libpng/scripts/pnglibconf.h.prebuilt create mode 100755 compat/libpng/scripts/pnglibconf.mak create mode 100755 compat/libpng/scripts/pngwin.rc create mode 100755 compat/libpng/scripts/prefix.c create mode 100755 compat/libpng/scripts/smakefile.ppc create mode 100755 compat/libpng/scripts/sym.c create mode 100755 compat/libpng/scripts/symbols.c create mode 100755 compat/libpng/scripts/symbols.def create mode 100755 compat/libpng/scripts/vers.c create mode 100755 compat/libpng/test-driver create mode 100755 compat/libpng/tests/pngimage-full create mode 100755 compat/libpng/tests/pngimage-quick create mode 100755 compat/libpng/tests/pngstest create mode 100755 compat/libpng/tests/pngstest-0g01 create mode 100755 compat/libpng/tests/pngstest-0g02 create mode 100755 compat/libpng/tests/pngstest-0g04 create mode 100755 compat/libpng/tests/pngstest-0g08 create mode 100755 compat/libpng/tests/pngstest-0g16 create mode 100755 compat/libpng/tests/pngstest-1.8 create mode 100755 compat/libpng/tests/pngstest-1.8-alpha create mode 100755 compat/libpng/tests/pngstest-2c08 create mode 100755 compat/libpng/tests/pngstest-2c16 create mode 100755 compat/libpng/tests/pngstest-3p01 create mode 100755 compat/libpng/tests/pngstest-3p02 create mode 100755 compat/libpng/tests/pngstest-3p04 create mode 100755 compat/libpng/tests/pngstest-3p08 create mode 100755 compat/libpng/tests/pngstest-4a08 create mode 100755 compat/libpng/tests/pngstest-4a16 create mode 100755 compat/libpng/tests/pngstest-6a08 create mode 100755 compat/libpng/tests/pngstest-6a16 create mode 100755 compat/libpng/tests/pngstest-error create mode 100755 compat/libpng/tests/pngstest-linear create mode 100755 compat/libpng/tests/pngstest-linear-alpha create mode 100755 compat/libpng/tests/pngstest-none create mode 100755 compat/libpng/tests/pngstest-none-alpha create mode 100755 compat/libpng/tests/pngstest-sRGB create mode 100755 compat/libpng/tests/pngstest-sRGB-alpha create mode 100755 compat/libpng/tests/pngtest create mode 100755 compat/libpng/tests/pngunknown-IDAT create mode 100755 compat/libpng/tests/pngunknown-discard create mode 100755 compat/libpng/tests/pngunknown-if-safe create mode 100755 compat/libpng/tests/pngunknown-sAPI create mode 100755 compat/libpng/tests/pngunknown-sTER create mode 100755 compat/libpng/tests/pngunknown-save create mode 100755 compat/libpng/tests/pngunknown-vpAg create mode 100755 compat/libpng/tests/pngvalid-gamma-16-to-8 create mode 100755 compat/libpng/tests/pngvalid-gamma-alpha-mode create mode 100755 compat/libpng/tests/pngvalid-gamma-background create mode 100755 compat/libpng/tests/pngvalid-gamma-expand16-alpha-mode create mode 100755 compat/libpng/tests/pngvalid-gamma-expand16-background create mode 100755 compat/libpng/tests/pngvalid-gamma-expand16-transform create mode 100755 compat/libpng/tests/pngvalid-gamma-sbit create mode 100755 compat/libpng/tests/pngvalid-gamma-threshold create mode 100755 compat/libpng/tests/pngvalid-gamma-transform create mode 100755 compat/libpng/tests/pngvalid-progressive-interlace-size create mode 100755 compat/libpng/tests/pngvalid-progressive-interlace-standard create mode 100755 compat/libpng/tests/pngvalid-progressive-interlace-transform create mode 100755 compat/libpng/tests/pngvalid-progressive-size create mode 100755 compat/libpng/tests/pngvalid-progressive-standard create mode 100755 compat/libpng/tests/pngvalid-standard create mode 100755 compat/libpng/tests/pngvalid-transform create mode 100755 compat/libtiff/COPYRIGHT create mode 100755 compat/libtiff/ChangeLog create mode 100755 compat/libtiff/HOWTO-RELEASE create mode 100755 compat/libtiff/Makefile.am create mode 100755 compat/libtiff/Makefile.in create mode 100755 compat/libtiff/Makefile.vc create mode 100755 compat/libtiff/README create mode 100755 compat/libtiff/README.vms create mode 100755 compat/libtiff/RELEASE-DATE create mode 100755 compat/libtiff/SConstruct create mode 100755 compat/libtiff/TODO create mode 100755 compat/libtiff/VERSION create mode 100755 compat/libtiff/aclocal.m4 create mode 100755 compat/libtiff/autogen.sh create mode 100755 compat/libtiff/build/Makefile.am create mode 100755 compat/libtiff/build/Makefile.in create mode 100755 compat/libtiff/build/README create mode 100755 compat/libtiff/config.guess create mode 100755 compat/libtiff/config.site create mode 100755 compat/libtiff/config.sub create mode 100755 compat/libtiff/config/compile create mode 100755 compat/libtiff/config/config.guess create mode 100755 compat/libtiff/config/config.sub create mode 100755 compat/libtiff/config/depcomp create mode 100755 compat/libtiff/config/install-sh create mode 100755 compat/libtiff/config/ltmain.sh create mode 100755 compat/libtiff/config/missing create mode 100755 compat/libtiff/config/mkinstalldirs create mode 100755 compat/libtiff/config/test-driver create mode 100755 compat/libtiff/configure create mode 100755 compat/libtiff/configure.ac create mode 100755 compat/libtiff/configure.com create mode 100755 compat/libtiff/contrib/Makefile.am create mode 100755 compat/libtiff/contrib/Makefile.in create mode 100755 compat/libtiff/contrib/README create mode 100755 compat/libtiff/contrib/acorn/Makefile create mode 100755 compat/libtiff/contrib/acorn/Makefile.acorn create mode 100755 compat/libtiff/contrib/acorn/Makefile.am create mode 100755 compat/libtiff/contrib/acorn/Makefile.in create mode 100755 compat/libtiff/contrib/acorn/ReadMe create mode 100755 compat/libtiff/contrib/acorn/SetVars create mode 100755 compat/libtiff/contrib/acorn/cleanlib create mode 100755 compat/libtiff/contrib/acorn/convert create mode 100755 compat/libtiff/contrib/acorn/install create mode 100755 compat/libtiff/contrib/addtiffo/Makefile create mode 100755 compat/libtiff/contrib/addtiffo/Makefile.am create mode 100755 compat/libtiff/contrib/addtiffo/Makefile.in create mode 100755 compat/libtiff/contrib/addtiffo/Makefile.vc create mode 100755 compat/libtiff/contrib/addtiffo/README create mode 100755 compat/libtiff/contrib/addtiffo/addtiffo.c create mode 100755 compat/libtiff/contrib/addtiffo/tif_overview.c create mode 100755 compat/libtiff/contrib/addtiffo/tif_ovrcache.c create mode 100755 compat/libtiff/contrib/addtiffo/tif_ovrcache.h create mode 100755 compat/libtiff/contrib/dbs/Imakefile create mode 100755 compat/libtiff/contrib/dbs/Makefile.am create mode 100755 compat/libtiff/contrib/dbs/Makefile.in create mode 100755 compat/libtiff/contrib/dbs/README create mode 100755 compat/libtiff/contrib/dbs/tiff-bi.c create mode 100755 compat/libtiff/contrib/dbs/tiff-grayscale.c create mode 100755 compat/libtiff/contrib/dbs/tiff-palette.c create mode 100755 compat/libtiff/contrib/dbs/tiff-rgb.c create mode 100755 compat/libtiff/contrib/dbs/xtiff/Imakefile create mode 100755 compat/libtiff/contrib/dbs/xtiff/Makefile.am create mode 100755 compat/libtiff/contrib/dbs/xtiff/Makefile.in create mode 100755 compat/libtiff/contrib/dbs/xtiff/README create mode 100755 compat/libtiff/contrib/dbs/xtiff/patchlevel.h create mode 100755 compat/libtiff/contrib/dbs/xtiff/xtiff.c create mode 100755 compat/libtiff/contrib/dbs/xtiff/xtifficon.h create mode 100755 compat/libtiff/contrib/dosdjgpp/Makefile.lib create mode 100755 compat/libtiff/contrib/dosdjgpp/Makefile.tools create mode 100755 compat/libtiff/contrib/dosdjgpp/Makefile.top create mode 100755 compat/libtiff/contrib/dosdjgpp/README create mode 100755 compat/libtiff/contrib/dosdjgpp/conf.bat create mode 100755 compat/libtiff/contrib/dosdjgpp/port.h create mode 100755 compat/libtiff/contrib/iptcutil/Makefile create mode 100755 compat/libtiff/contrib/iptcutil/Makefile.am create mode 100755 compat/libtiff/contrib/iptcutil/Makefile.in create mode 100755 compat/libtiff/contrib/iptcutil/README create mode 100755 compat/libtiff/contrib/iptcutil/iptcutil.c create mode 100755 compat/libtiff/contrib/iptcutil/test.iptc create mode 100755 compat/libtiff/contrib/iptcutil/test.txt create mode 100755 compat/libtiff/contrib/mac-cw/Makefile.am create mode 100755 compat/libtiff/contrib/mac-cw/Makefile.in create mode 100755 compat/libtiff/contrib/mac-cw/Makefile.script create mode 100755 compat/libtiff/contrib/mac-cw/README create mode 100755 compat/libtiff/contrib/mac-cw/mac_main.c create mode 100755 compat/libtiff/contrib/mac-cw/mac_main.h create mode 100755 compat/libtiff/contrib/mac-cw/metrowerks.note create mode 100755 compat/libtiff/contrib/mac-cw/mkg3_main.c create mode 100755 compat/libtiff/contrib/mac-cw/version.h create mode 100755 compat/libtiff/contrib/mac-mpw/BUILD.mpw create mode 100755 compat/libtiff/contrib/mac-mpw/Makefile.am create mode 100755 compat/libtiff/contrib/mac-mpw/Makefile.in create mode 100755 compat/libtiff/contrib/mac-mpw/README create mode 100755 compat/libtiff/contrib/mac-mpw/libtiff.make create mode 100755 compat/libtiff/contrib/mac-mpw/mactrans.c create mode 100755 compat/libtiff/contrib/mac-mpw/port.make create mode 100755 compat/libtiff/contrib/mac-mpw/tools.make create mode 100755 compat/libtiff/contrib/mac-mpw/top.make create mode 100755 compat/libtiff/contrib/mfs/Makefile.am create mode 100755 compat/libtiff/contrib/mfs/Makefile.in create mode 100755 compat/libtiff/contrib/mfs/README create mode 100755 compat/libtiff/contrib/mfs/mfs_file.c create mode 100755 compat/libtiff/contrib/ojpeg/Makefile.am create mode 100755 compat/libtiff/contrib/ojpeg/Makefile.in create mode 100755 compat/libtiff/contrib/ojpeg/README create mode 100755 compat/libtiff/contrib/ojpeg/jdhuff_add.c create mode 100755 compat/libtiff/contrib/pds/Makefile.am create mode 100755 compat/libtiff/contrib/pds/Makefile.in create mode 100755 compat/libtiff/contrib/pds/README create mode 100755 compat/libtiff/contrib/pds/tif_imageiter.c create mode 100755 compat/libtiff/contrib/pds/tif_imageiter.h create mode 100755 compat/libtiff/contrib/pds/tif_pdsdirread.c create mode 100755 compat/libtiff/contrib/pds/tif_pdsdirwrite.c create mode 100755 compat/libtiff/contrib/ras/Makefile.am create mode 100755 compat/libtiff/contrib/ras/Makefile.in create mode 100755 compat/libtiff/contrib/ras/README create mode 100755 compat/libtiff/contrib/ras/ras2tif.c create mode 100755 compat/libtiff/contrib/ras/tif2ras.c create mode 100755 compat/libtiff/contrib/stream/Makefile.am create mode 100755 compat/libtiff/contrib/stream/Makefile.in create mode 100755 compat/libtiff/contrib/stream/README create mode 100755 compat/libtiff/contrib/stream/tiffstream.cpp create mode 100755 compat/libtiff/contrib/stream/tiffstream.h create mode 100755 compat/libtiff/contrib/tags/Makefile.am create mode 100755 compat/libtiff/contrib/tags/Makefile.gcc create mode 100755 compat/libtiff/contrib/tags/Makefile.in create mode 100755 compat/libtiff/contrib/tags/Makefile.mpw create mode 100755 compat/libtiff/contrib/tags/README create mode 100755 compat/libtiff/contrib/tags/listtif.c create mode 100755 compat/libtiff/contrib/tags/maketif.c create mode 100755 compat/libtiff/contrib/tags/xtif_dir.c create mode 100755 compat/libtiff/contrib/tags/xtiffio.h create mode 100755 compat/libtiff/contrib/tags/xtiffiop.h create mode 100755 compat/libtiff/contrib/vms/libtiff/makevms.com create mode 100755 compat/libtiff/contrib/vms/libtiff/tiff.opt create mode 100755 compat/libtiff/contrib/vms/libtiff/tiffshraxp.opt create mode 100755 compat/libtiff/contrib/vms/libtiff/tiffshrvax.opt create mode 100755 compat/libtiff/contrib/vms/libtiff/tiffvec.mar create mode 100755 compat/libtiff/contrib/vms/tools/makevms.com create mode 100755 compat/libtiff/contrib/win32/README create mode 100755 compat/libtiff/contrib/win32/dllshell.c create mode 100755 compat/libtiff/contrib/win32/libtiff.def create mode 100755 compat/libtiff/contrib/win_dib/Makefile.am create mode 100755 compat/libtiff/contrib/win_dib/Makefile.in create mode 100755 compat/libtiff/contrib/win_dib/Makefile.w95 create mode 100755 compat/libtiff/contrib/win_dib/README.Tiffile create mode 100755 compat/libtiff/contrib/win_dib/README.tiff2dib create mode 100755 compat/libtiff/contrib/win_dib/Tiffile.cpp create mode 100755 compat/libtiff/contrib/win_dib/tiff2dib.c create mode 100755 compat/libtiff/contrib/winnt/README create mode 100755 compat/libtiff/contrib/winnt/README.console create mode 100755 compat/libtiff/contrib/winnt/fax3sm.c create mode 100755 compat/libtiff/contrib/winnt/libtiff.def create mode 100755 compat/libtiff/contrib/winnt/libtiff.mak create mode 100755 compat/libtiff/contrib/winnt/libtiff.vcp create mode 100755 compat/libtiff/contrib/winnt/version.h create mode 100755 compat/libtiff/html/Makefile.am create mode 100755 compat/libtiff/html/Makefile.in create mode 100755 compat/libtiff/html/TIFFTechNote2.html create mode 100755 compat/libtiff/html/addingtags.html create mode 100755 compat/libtiff/html/bugs.html create mode 100755 compat/libtiff/html/build.html create mode 100755 compat/libtiff/html/contrib.html create mode 100755 compat/libtiff/html/document.html create mode 100755 compat/libtiff/html/images.html create mode 100755 compat/libtiff/html/images/Makefile.am create mode 100755 compat/libtiff/html/images/Makefile.in create mode 100755 compat/libtiff/html/images/back.gif create mode 100755 compat/libtiff/html/images/bali.jpg create mode 100755 compat/libtiff/html/images/cat.gif create mode 100755 compat/libtiff/html/images/cover.jpg create mode 100755 compat/libtiff/html/images/cramps.gif create mode 100755 compat/libtiff/html/images/dave.gif create mode 100755 compat/libtiff/html/images/info.gif create mode 100755 compat/libtiff/html/images/jello.jpg create mode 100755 compat/libtiff/html/images/jim.gif create mode 100755 compat/libtiff/html/images/note.gif create mode 100755 compat/libtiff/html/images/oxford.gif create mode 100755 compat/libtiff/html/images/quad.jpg create mode 100755 compat/libtiff/html/images/ring.gif create mode 100755 compat/libtiff/html/images/smallliz.jpg create mode 100755 compat/libtiff/html/images/strike.gif create mode 100755 compat/libtiff/html/images/warning.gif create mode 100755 compat/libtiff/html/index.html create mode 100755 compat/libtiff/html/internals.html create mode 100755 compat/libtiff/html/intro.html create mode 100755 compat/libtiff/html/libtiff.html create mode 100755 compat/libtiff/html/man/Makefile.am create mode 100755 compat/libtiff/html/man/Makefile.in create mode 100755 compat/libtiff/html/man/TIFFClose.3tiff.html create mode 100755 compat/libtiff/html/man/TIFFDataWidth.3tiff.html create mode 100755 compat/libtiff/html/man/TIFFError.3tiff.html create mode 100755 compat/libtiff/html/man/TIFFFlush.3tiff.html create mode 100755 compat/libtiff/html/man/TIFFGetField.3tiff.html create mode 100755 compat/libtiff/html/man/TIFFOpen.3tiff.html create mode 100755 compat/libtiff/html/man/TIFFPrintDirectory.3tiff.html create mode 100755 compat/libtiff/html/man/TIFFRGBAImage.3tiff.html create mode 100755 compat/libtiff/html/man/TIFFReadDirectory.3tiff.html create mode 100755 compat/libtiff/html/man/TIFFReadEncodedStrip.3tiff.html create mode 100755 compat/libtiff/html/man/TIFFReadEncodedTile.3tiff.html create mode 100755 compat/libtiff/html/man/TIFFReadRGBAImage.3tiff.html create mode 100755 compat/libtiff/html/man/TIFFReadRGBAStrip.3tiff.html create mode 100755 compat/libtiff/html/man/TIFFReadRGBATile.3tiff.html create mode 100755 compat/libtiff/html/man/TIFFReadRawStrip.3tiff.html create mode 100755 compat/libtiff/html/man/TIFFReadRawTile.3tiff.html create mode 100755 compat/libtiff/html/man/TIFFReadScanline.3tiff.html create mode 100755 compat/libtiff/html/man/TIFFReadTile.3tiff.html create mode 100755 compat/libtiff/html/man/TIFFSetDirectory.3tiff.html create mode 100755 compat/libtiff/html/man/TIFFSetField.3tiff.html create mode 100755 compat/libtiff/html/man/TIFFWarning.3tiff.html create mode 100755 compat/libtiff/html/man/TIFFWriteDirectory.3tiff.html create mode 100755 compat/libtiff/html/man/TIFFWriteEncodedStrip.3tiff.html create mode 100755 compat/libtiff/html/man/TIFFWriteEncodedTile.3tiff.html create mode 100755 compat/libtiff/html/man/TIFFWriteRawStrip.3tiff.html create mode 100755 compat/libtiff/html/man/TIFFWriteRawTile.3tiff.html create mode 100755 compat/libtiff/html/man/TIFFWriteScanline.3tiff.html create mode 100755 compat/libtiff/html/man/TIFFWriteTile.3tiff.html create mode 100755 compat/libtiff/html/man/TIFFbuffer.3tiff.html create mode 100755 compat/libtiff/html/man/TIFFcodec.3tiff.html create mode 100755 compat/libtiff/html/man/TIFFcolor.3tiff.html create mode 100755 compat/libtiff/html/man/TIFFmemory.3tiff.html create mode 100755 compat/libtiff/html/man/TIFFquery.3tiff.html create mode 100755 compat/libtiff/html/man/TIFFsize.3tiff.html create mode 100755 compat/libtiff/html/man/TIFFstrip.3tiff.html create mode 100755 compat/libtiff/html/man/TIFFswab.3tiff.html create mode 100755 compat/libtiff/html/man/TIFFtile.3tiff.html create mode 100755 compat/libtiff/html/man/fax2ps.1.html create mode 100755 compat/libtiff/html/man/fax2tiff.1.html create mode 100755 compat/libtiff/html/man/gif2tiff.1.html create mode 100755 compat/libtiff/html/man/index.html create mode 100755 compat/libtiff/html/man/libtiff.3tiff.html create mode 100755 compat/libtiff/html/man/pal2rgb.1.html create mode 100755 compat/libtiff/html/man/ppm2tiff.1.html create mode 100755 compat/libtiff/html/man/ras2tiff.1.html create mode 100755 compat/libtiff/html/man/raw2tiff.1.html create mode 100755 compat/libtiff/html/man/rgb2ycbcr.1.html create mode 100755 compat/libtiff/html/man/sgi2tiff.1.html create mode 100755 compat/libtiff/html/man/thumbnail.1.html create mode 100755 compat/libtiff/html/man/tiff2bw.1.html create mode 100755 compat/libtiff/html/man/tiff2pdf.1.html create mode 100755 compat/libtiff/html/man/tiff2ps.1.html create mode 100755 compat/libtiff/html/man/tiff2rgba.1.html create mode 100755 compat/libtiff/html/man/tiffcmp.1.html create mode 100755 compat/libtiff/html/man/tiffcp.1.html create mode 100755 compat/libtiff/html/man/tiffcrop.1.html create mode 100755 compat/libtiff/html/man/tiffdither.1.html create mode 100755 compat/libtiff/html/man/tiffdump.1.html create mode 100755 compat/libtiff/html/man/tiffgt.1.html create mode 100755 compat/libtiff/html/man/tiffinfo.1.html create mode 100755 compat/libtiff/html/man/tiffmedian.1.html create mode 100755 compat/libtiff/html/man/tiffset.1.html create mode 100755 compat/libtiff/html/man/tiffsplit.1.html create mode 100755 compat/libtiff/html/man/tiffsv.1.html create mode 100755 compat/libtiff/html/misc.html create mode 100755 compat/libtiff/html/support.html create mode 100755 compat/libtiff/html/tools.html create mode 100755 compat/libtiff/html/v3.4beta007.html create mode 100755 compat/libtiff/html/v3.4beta016.html create mode 100755 compat/libtiff/html/v3.4beta018.html create mode 100755 compat/libtiff/html/v3.4beta024.html create mode 100755 compat/libtiff/html/v3.4beta028.html create mode 100755 compat/libtiff/html/v3.4beta029.html create mode 100755 compat/libtiff/html/v3.4beta031.html create mode 100755 compat/libtiff/html/v3.4beta032.html create mode 100755 compat/libtiff/html/v3.4beta033.html create mode 100755 compat/libtiff/html/v3.4beta034.html create mode 100755 compat/libtiff/html/v3.4beta035.html create mode 100755 compat/libtiff/html/v3.4beta036.html create mode 100755 compat/libtiff/html/v3.5.1.html create mode 100755 compat/libtiff/html/v3.5.2.html create mode 100755 compat/libtiff/html/v3.5.3.html create mode 100755 compat/libtiff/html/v3.5.4.html create mode 100755 compat/libtiff/html/v3.5.5.html create mode 100755 compat/libtiff/html/v3.5.6-beta.html create mode 100755 compat/libtiff/html/v3.5.7.html create mode 100755 compat/libtiff/html/v3.6.0.html create mode 100755 compat/libtiff/html/v3.6.1.html create mode 100755 compat/libtiff/html/v3.7.0.html create mode 100755 compat/libtiff/html/v3.7.0alpha.html create mode 100755 compat/libtiff/html/v3.7.0beta.html create mode 100755 compat/libtiff/html/v3.7.0beta2.html create mode 100755 compat/libtiff/html/v3.7.1.html create mode 100755 compat/libtiff/html/v3.7.2.html create mode 100755 compat/libtiff/html/v3.7.3.html create mode 100755 compat/libtiff/html/v3.7.4.html create mode 100755 compat/libtiff/html/v3.8.0.html create mode 100755 compat/libtiff/html/v3.8.1.html create mode 100755 compat/libtiff/html/v3.8.2.html create mode 100755 compat/libtiff/html/v3.9.0beta.html create mode 100755 compat/libtiff/html/v3.9.1.html create mode 100755 compat/libtiff/html/v3.9.2.html create mode 100755 compat/libtiff/libtiff/Makefile.am create mode 100755 compat/libtiff/libtiff/Makefile.in create mode 100755 compat/libtiff/libtiff/Makefile.lcc create mode 100755 compat/libtiff/libtiff/Makefile.vc create mode 100755 compat/libtiff/libtiff/SConstruct create mode 100755 compat/libtiff/libtiff/fax3sm_winnt.c create mode 100755 compat/libtiff/libtiff/libtiff.def create mode 100755 compat/libtiff/libtiff/libtiff.map create mode 100755 compat/libtiff/libtiff/libtiffxx.map create mode 100755 compat/libtiff/libtiff/mkg3states.c create mode 100755 compat/libtiff/libtiff/mkspans.c create mode 100755 compat/libtiff/libtiff/mkversion.c create mode 100755 compat/libtiff/libtiff/t4.h create mode 100755 compat/libtiff/libtiff/tif_acorn.c create mode 100755 compat/libtiff/libtiff/tif_apple.c create mode 100755 compat/libtiff/libtiff/tif_atari.c create mode 100755 compat/libtiff/libtiff/tif_aux.c create mode 100755 compat/libtiff/libtiff/tif_close.c create mode 100755 compat/libtiff/libtiff/tif_codec.c create mode 100755 compat/libtiff/libtiff/tif_color.c create mode 100755 compat/libtiff/libtiff/tif_compress.c create mode 100755 compat/libtiff/libtiff/tif_config.h-vms create mode 100755 compat/libtiff/libtiff/tif_config.h.in create mode 100755 compat/libtiff/libtiff/tif_config.h.vc create mode 100755 compat/libtiff/libtiff/tif_config.vc.h create mode 100755 compat/libtiff/libtiff/tif_config.wince.h create mode 100755 compat/libtiff/libtiff/tif_dir.c create mode 100755 compat/libtiff/libtiff/tif_dir.h create mode 100755 compat/libtiff/libtiff/tif_dirinfo.c create mode 100755 compat/libtiff/libtiff/tif_dirread.c create mode 100755 compat/libtiff/libtiff/tif_dirwrite.c create mode 100755 compat/libtiff/libtiff/tif_dumpmode.c create mode 100755 compat/libtiff/libtiff/tif_error.c create mode 100755 compat/libtiff/libtiff/tif_extension.c create mode 100755 compat/libtiff/libtiff/tif_fax3.c create mode 100755 compat/libtiff/libtiff/tif_fax3.h create mode 100755 compat/libtiff/libtiff/tif_fax3sm.c create mode 100755 compat/libtiff/libtiff/tif_flush.c create mode 100755 compat/libtiff/libtiff/tif_getimage.c create mode 100755 compat/libtiff/libtiff/tif_jbig.c create mode 100755 compat/libtiff/libtiff/tif_jpeg.c create mode 100755 compat/libtiff/libtiff/tif_luv.c create mode 100755 compat/libtiff/libtiff/tif_lzw.c create mode 100755 compat/libtiff/libtiff/tif_msdos.c create mode 100755 compat/libtiff/libtiff/tif_next.c create mode 100755 compat/libtiff/libtiff/tif_ojpeg.c create mode 100755 compat/libtiff/libtiff/tif_open.c create mode 100755 compat/libtiff/libtiff/tif_packbits.c create mode 100755 compat/libtiff/libtiff/tif_pixarlog.c create mode 100755 compat/libtiff/libtiff/tif_predict.c create mode 100755 compat/libtiff/libtiff/tif_predict.h create mode 100755 compat/libtiff/libtiff/tif_print.c create mode 100755 compat/libtiff/libtiff/tif_read.c create mode 100755 compat/libtiff/libtiff/tif_stream.cxx create mode 100755 compat/libtiff/libtiff/tif_strip.c create mode 100755 compat/libtiff/libtiff/tif_swab.c create mode 100755 compat/libtiff/libtiff/tif_thunder.c create mode 100755 compat/libtiff/libtiff/tif_tile.c create mode 100755 compat/libtiff/libtiff/tif_unix.c create mode 100755 compat/libtiff/libtiff/tif_version.c create mode 100755 compat/libtiff/libtiff/tif_vms.c create mode 100755 compat/libtiff/libtiff/tif_warning.c create mode 100755 compat/libtiff/libtiff/tif_win3.c create mode 100755 compat/libtiff/libtiff/tif_win32.c create mode 100755 compat/libtiff/libtiff/tif_write.c create mode 100755 compat/libtiff/libtiff/tif_zip.c create mode 100755 compat/libtiff/libtiff/tiff.h create mode 100755 compat/libtiff/libtiff/tiffcomp.h create mode 100755 compat/libtiff/libtiff/tiffconf.h.in create mode 100755 compat/libtiff/libtiff/tiffconf.h.vc create mode 100755 compat/libtiff/libtiff/tiffconf.vc.h create mode 100755 compat/libtiff/libtiff/tiffconf.wince.h create mode 100755 compat/libtiff/libtiff/tiffio.h create mode 100755 compat/libtiff/libtiff/tiffio.hxx create mode 100755 compat/libtiff/libtiff/tiffiop.h create mode 100755 compat/libtiff/libtiff/tiffvers.h create mode 100755 compat/libtiff/libtiff/uvcode.h create mode 100755 compat/libtiff/m4/acinclude.m4 create mode 100755 compat/libtiff/m4/libtool.m4 create mode 100755 compat/libtiff/m4/ltoptions.m4 create mode 100755 compat/libtiff/m4/ltsugar.m4 create mode 100755 compat/libtiff/m4/ltversion.m4 create mode 100755 compat/libtiff/m4/lt~obsolete.m4 create mode 100755 compat/libtiff/man/Makefile.am create mode 100755 compat/libtiff/man/Makefile.in create mode 100755 compat/libtiff/man/TIFFClose.3tiff create mode 100755 compat/libtiff/man/TIFFDataWidth.3tiff create mode 100755 compat/libtiff/man/TIFFError.3tiff create mode 100755 compat/libtiff/man/TIFFFlush.3tiff create mode 100755 compat/libtiff/man/TIFFGetField.3tiff create mode 100755 compat/libtiff/man/TIFFOpen.3tiff create mode 100755 compat/libtiff/man/TIFFPrintDirectory.3tiff create mode 100755 compat/libtiff/man/TIFFRGBAImage.3tiff create mode 100755 compat/libtiff/man/TIFFReadDirectory.3tiff create mode 100755 compat/libtiff/man/TIFFReadEncodedStrip.3tiff create mode 100755 compat/libtiff/man/TIFFReadEncodedTile.3tiff create mode 100755 compat/libtiff/man/TIFFReadRGBAImage.3tiff create mode 100755 compat/libtiff/man/TIFFReadRGBAStrip.3tiff create mode 100755 compat/libtiff/man/TIFFReadRGBATile.3tiff create mode 100755 compat/libtiff/man/TIFFReadRawStrip.3tiff create mode 100755 compat/libtiff/man/TIFFReadRawTile.3tiff create mode 100755 compat/libtiff/man/TIFFReadScanline.3tiff create mode 100755 compat/libtiff/man/TIFFReadTile.3tiff create mode 100755 compat/libtiff/man/TIFFSetDirectory.3tiff create mode 100755 compat/libtiff/man/TIFFSetField.3tiff create mode 100755 compat/libtiff/man/TIFFWarning.3tiff create mode 100755 compat/libtiff/man/TIFFWriteDirectory.3tiff create mode 100755 compat/libtiff/man/TIFFWriteEncodedStrip.3tiff create mode 100755 compat/libtiff/man/TIFFWriteEncodedTile.3tiff create mode 100755 compat/libtiff/man/TIFFWriteRawStrip.3tiff create mode 100755 compat/libtiff/man/TIFFWriteRawTile.3tiff create mode 100755 compat/libtiff/man/TIFFWriteScanline.3tiff create mode 100755 compat/libtiff/man/TIFFWriteTile.3tiff create mode 100755 compat/libtiff/man/TIFFbuffer.3tiff create mode 100755 compat/libtiff/man/TIFFcodec.3tiff create mode 100755 compat/libtiff/man/TIFFcolor.3tiff create mode 100755 compat/libtiff/man/TIFFmemory.3tiff create mode 100755 compat/libtiff/man/TIFFquery.3tiff create mode 100755 compat/libtiff/man/TIFFsize.3tiff create mode 100755 compat/libtiff/man/TIFFstrip.3tiff create mode 100755 compat/libtiff/man/TIFFswab.3tiff create mode 100755 compat/libtiff/man/TIFFtile.3tiff create mode 100755 compat/libtiff/man/bmp2tiff.1 create mode 100755 compat/libtiff/man/fax2ps.1 create mode 100755 compat/libtiff/man/fax2tiff.1 create mode 100755 compat/libtiff/man/gif2tiff.1 create mode 100755 compat/libtiff/man/libtiff.3tiff create mode 100755 compat/libtiff/man/pal2rgb.1 create mode 100755 compat/libtiff/man/ppm2tiff.1 create mode 100755 compat/libtiff/man/ras2tiff.1 create mode 100755 compat/libtiff/man/raw2tiff.1 create mode 100755 compat/libtiff/man/rgb2ycbcr.1 create mode 100755 compat/libtiff/man/sgi2tiff.1 create mode 100755 compat/libtiff/man/thumbnail.1 create mode 100755 compat/libtiff/man/tiff2bw.1 create mode 100755 compat/libtiff/man/tiff2pdf.1 create mode 100755 compat/libtiff/man/tiff2ps.1 create mode 100755 compat/libtiff/man/tiff2rgba.1 create mode 100755 compat/libtiff/man/tiffcmp.1 create mode 100755 compat/libtiff/man/tiffcp.1 create mode 100755 compat/libtiff/man/tiffcrop.1 create mode 100755 compat/libtiff/man/tiffdither.1 create mode 100755 compat/libtiff/man/tiffdump.1 create mode 100755 compat/libtiff/man/tiffgt.1 create mode 100755 compat/libtiff/man/tiffinfo.1 create mode 100755 compat/libtiff/man/tiffmedian.1 create mode 100755 compat/libtiff/man/tiffset.1 create mode 100755 compat/libtiff/man/tiffsplit.1 create mode 100755 compat/libtiff/man/tiffsv.1 create mode 100755 compat/libtiff/nmake.opt create mode 100755 compat/libtiff/port/Makefile.am create mode 100755 compat/libtiff/port/Makefile.in create mode 100755 compat/libtiff/port/Makefile.vc create mode 100755 compat/libtiff/port/dummy.c create mode 100755 compat/libtiff/port/getopt.c create mode 100755 compat/libtiff/port/install.sh.in create mode 100755 compat/libtiff/port/irix/so_locations create mode 100755 compat/libtiff/port/lfind.c create mode 100755 compat/libtiff/port/libport.h create mode 100755 compat/libtiff/port/strcasecmp.c create mode 100755 compat/libtiff/port/strtoul.c create mode 100755 compat/libtiff/test/Makefile.am create mode 100755 compat/libtiff/test/Makefile.in create mode 100755 compat/libtiff/test/ascii_tag.c create mode 100755 compat/libtiff/test/check_tag.c create mode 100755 compat/libtiff/test/long_tag.c create mode 100755 compat/libtiff/test/short_tag.c create mode 100755 compat/libtiff/test/strip.c create mode 100755 compat/libtiff/test/strip_rw.c create mode 100755 compat/libtiff/test/test_arrays.c create mode 100755 compat/libtiff/test/test_arrays.h create mode 100755 compat/libtiff/test_pics.sh create mode 100755 compat/libtiff/tools/Makefile.am create mode 100755 compat/libtiff/tools/Makefile.in create mode 100755 compat/libtiff/tools/Makefile.lcc create mode 100755 compat/libtiff/tools/Makefile.vc create mode 100755 compat/libtiff/tools/bmp2tiff.c create mode 100755 compat/libtiff/tools/fax2ps.c create mode 100755 compat/libtiff/tools/fax2tiff.c create mode 100755 compat/libtiff/tools/gif2tiff.c create mode 100755 compat/libtiff/tools/pal2rgb.c create mode 100755 compat/libtiff/tools/ppm2tiff.c create mode 100755 compat/libtiff/tools/ras2tiff.c create mode 100755 compat/libtiff/tools/rasterfile.h create mode 100755 compat/libtiff/tools/raw2tiff.c create mode 100755 compat/libtiff/tools/rgb2ycbcr.c create mode 100755 compat/libtiff/tools/sgi2tiff.c create mode 100755 compat/libtiff/tools/sgisv.c create mode 100755 compat/libtiff/tools/thumbnail.c create mode 100755 compat/libtiff/tools/tiff2bw.c create mode 100755 compat/libtiff/tools/tiff2pdf.c create mode 100755 compat/libtiff/tools/tiff2ps.c create mode 100755 compat/libtiff/tools/tiff2rgba.c create mode 100755 compat/libtiff/tools/tiffcmp.c create mode 100755 compat/libtiff/tools/tiffcp.c create mode 100755 compat/libtiff/tools/tiffcrop.c create mode 100755 compat/libtiff/tools/tiffdither.c create mode 100755 compat/libtiff/tools/tiffdump.c create mode 100755 compat/libtiff/tools/tiffgt.c create mode 100755 compat/libtiff/tools/tiffinfo.c create mode 100755 compat/libtiff/tools/tiffmedian.c create mode 100755 compat/libtiff/tools/tiffset.c create mode 100755 compat/libtiff/tools/tiffsplit.c create mode 100755 compat/libtiff/tools/ycbcr.c create mode 100755 compat/tclLoadAix.c create mode 100755 compat/tclLoadAout.c create mode 100755 compat/tclLoadDld.c create mode 100755 compat/tclLoadMac.c create mode 100755 compat/tclLoadNone.c create mode 100755 compat/tclLoadShl.c create mode 100755 compat/tclLoadWin.c create mode 100755 compat/zlib/CMakeLists.txt create mode 100755 compat/zlib/ChangeLog create mode 100755 compat/zlib/FAQ create mode 100755 compat/zlib/INDEX create mode 100755 compat/zlib/Makefile create mode 100755 compat/zlib/Makefile.in create mode 100755 compat/zlib/README create mode 100755 compat/zlib/adler32.c create mode 100755 compat/zlib/amiga/Makefile.pup create mode 100755 compat/zlib/amiga/Makefile.sas create mode 100755 compat/zlib/as400/bndsrc create mode 100755 compat/zlib/as400/compile.clp create mode 100755 compat/zlib/as400/readme.txt create mode 100755 compat/zlib/as400/zlib.inc create mode 100755 compat/zlib/compress.c create mode 100755 compat/zlib/configure create mode 100755 compat/zlib/contrib/README.contrib create mode 100755 compat/zlib/contrib/ada/buffer_demo.adb create mode 100755 compat/zlib/contrib/ada/mtest.adb create mode 100755 compat/zlib/contrib/ada/read.adb create mode 100755 compat/zlib/contrib/ada/readme.txt create mode 100755 compat/zlib/contrib/ada/test.adb create mode 100755 compat/zlib/contrib/ada/zlib-streams.adb create mode 100755 compat/zlib/contrib/ada/zlib-streams.ads create mode 100755 compat/zlib/contrib/ada/zlib-thin.adb create mode 100755 compat/zlib/contrib/ada/zlib-thin.ads create mode 100755 compat/zlib/contrib/ada/zlib.adb create mode 100755 compat/zlib/contrib/ada/zlib.ads create mode 100755 compat/zlib/contrib/ada/zlib.gpr create mode 100755 compat/zlib/contrib/amd64/amd64-match.S create mode 100755 compat/zlib/contrib/asm686/README.686 create mode 100755 compat/zlib/contrib/asm686/match.S create mode 100755 compat/zlib/contrib/blast/Makefile create mode 100755 compat/zlib/contrib/blast/README create mode 100755 compat/zlib/contrib/blast/blast.c create mode 100755 compat/zlib/contrib/blast/blast.h create mode 100755 compat/zlib/contrib/blast/test.pk create mode 100755 compat/zlib/contrib/blast/test.txt create mode 100755 compat/zlib/contrib/delphi/ZLib.pas create mode 100755 compat/zlib/contrib/delphi/ZLibConst.pas create mode 100755 compat/zlib/contrib/delphi/readme.txt create mode 100755 compat/zlib/contrib/delphi/zlibd32.mak create mode 100755 compat/zlib/contrib/dotzlib/DotZLib.build create mode 100755 compat/zlib/contrib/dotzlib/DotZLib.chm create mode 100755 compat/zlib/contrib/dotzlib/DotZLib.sln create mode 100755 compat/zlib/contrib/dotzlib/DotZLib/AssemblyInfo.cs create mode 100755 compat/zlib/contrib/dotzlib/DotZLib/ChecksumImpl.cs create mode 100755 compat/zlib/contrib/dotzlib/DotZLib/CircularBuffer.cs create mode 100755 compat/zlib/contrib/dotzlib/DotZLib/CodecBase.cs create mode 100755 compat/zlib/contrib/dotzlib/DotZLib/Deflater.cs create mode 100755 compat/zlib/contrib/dotzlib/DotZLib/DotZLib.cs create mode 100755 compat/zlib/contrib/dotzlib/DotZLib/DotZLib.csproj create mode 100755 compat/zlib/contrib/dotzlib/DotZLib/GZipStream.cs create mode 100755 compat/zlib/contrib/dotzlib/DotZLib/Inflater.cs create mode 100755 compat/zlib/contrib/dotzlib/DotZLib/UnitTests.cs create mode 100755 compat/zlib/contrib/dotzlib/LICENSE_1_0.txt create mode 100755 compat/zlib/contrib/dotzlib/readme.txt create mode 100755 compat/zlib/contrib/gcc_gvmat64/gvmat64.S create mode 100755 compat/zlib/contrib/infback9/README create mode 100755 compat/zlib/contrib/infback9/infback9.c create mode 100755 compat/zlib/contrib/infback9/infback9.h create mode 100755 compat/zlib/contrib/infback9/inffix9.h create mode 100755 compat/zlib/contrib/infback9/inflate9.h create mode 100755 compat/zlib/contrib/infback9/inftree9.c create mode 100755 compat/zlib/contrib/infback9/inftree9.h create mode 100755 compat/zlib/contrib/inflate86/inffas86.c create mode 100755 compat/zlib/contrib/inflate86/inffast.S create mode 100755 compat/zlib/contrib/iostream/test.cpp create mode 100755 compat/zlib/contrib/iostream/zfstream.cpp create mode 100755 compat/zlib/contrib/iostream/zfstream.h create mode 100755 compat/zlib/contrib/iostream2/zstream.h create mode 100755 compat/zlib/contrib/iostream2/zstream_test.cpp create mode 100755 compat/zlib/contrib/iostream3/README create mode 100755 compat/zlib/contrib/iostream3/TODO create mode 100755 compat/zlib/contrib/iostream3/test.cc create mode 100755 compat/zlib/contrib/iostream3/zfstream.cc create mode 100755 compat/zlib/contrib/iostream3/zfstream.h create mode 100755 compat/zlib/contrib/masmx64/bld_ml64.bat create mode 100755 compat/zlib/contrib/masmx64/gvmat64.asm create mode 100755 compat/zlib/contrib/masmx64/inffas8664.c create mode 100755 compat/zlib/contrib/masmx64/inffasx64.asm create mode 100755 compat/zlib/contrib/masmx64/readme.txt create mode 100755 compat/zlib/contrib/masmx86/bld_ml32.bat create mode 100755 compat/zlib/contrib/masmx86/inffas32.asm create mode 100755 compat/zlib/contrib/masmx86/match686.asm create mode 100755 compat/zlib/contrib/masmx86/readme.txt create mode 100755 compat/zlib/contrib/minizip/Makefile create mode 100755 compat/zlib/contrib/minizip/Makefile.am create mode 100755 compat/zlib/contrib/minizip/MiniZip64_Changes.txt create mode 100755 compat/zlib/contrib/minizip/MiniZip64_info.txt create mode 100755 compat/zlib/contrib/minizip/configure.ac create mode 100755 compat/zlib/contrib/minizip/crypt.h create mode 100755 compat/zlib/contrib/minizip/ioapi.c create mode 100755 compat/zlib/contrib/minizip/ioapi.h create mode 100755 compat/zlib/contrib/minizip/iowin32.c create mode 100755 compat/zlib/contrib/minizip/iowin32.h create mode 100755 compat/zlib/contrib/minizip/make_vms.com create mode 100755 compat/zlib/contrib/minizip/miniunz.c create mode 100755 compat/zlib/contrib/minizip/miniunzip.1 create mode 100755 compat/zlib/contrib/minizip/minizip.1 create mode 100755 compat/zlib/contrib/minizip/minizip.c create mode 100755 compat/zlib/contrib/minizip/minizip.pc.in create mode 100755 compat/zlib/contrib/minizip/mztools.c create mode 100755 compat/zlib/contrib/minizip/mztools.h create mode 100755 compat/zlib/contrib/minizip/unzip.c create mode 100755 compat/zlib/contrib/minizip/unzip.h create mode 100755 compat/zlib/contrib/minizip/zip.c create mode 100755 compat/zlib/contrib/minizip/zip.h create mode 100755 compat/zlib/contrib/pascal/example.pas create mode 100755 compat/zlib/contrib/pascal/readme.txt create mode 100755 compat/zlib/contrib/pascal/zlibd32.mak create mode 100755 compat/zlib/contrib/pascal/zlibpas.pas create mode 100755 compat/zlib/contrib/puff/Makefile create mode 100755 compat/zlib/contrib/puff/README create mode 100755 compat/zlib/contrib/puff/puff.c create mode 100755 compat/zlib/contrib/puff/puff.h create mode 100755 compat/zlib/contrib/puff/pufftest.c create mode 100755 compat/zlib/contrib/puff/zeros.raw create mode 100755 compat/zlib/contrib/testzlib/testzlib.c create mode 100755 compat/zlib/contrib/testzlib/testzlib.txt create mode 100755 compat/zlib/contrib/untgz/Makefile create mode 100755 compat/zlib/contrib/untgz/Makefile.msc create mode 100755 compat/zlib/contrib/untgz/untgz.c create mode 100755 compat/zlib/contrib/vstudio/readme.txt create mode 100755 compat/zlib/contrib/vstudio/vc10/miniunz.vcxproj create mode 100755 compat/zlib/contrib/vstudio/vc10/miniunz.vcxproj.filters create mode 100755 compat/zlib/contrib/vstudio/vc10/miniunz.vcxproj.user create mode 100755 compat/zlib/contrib/vstudio/vc10/minizip.vcxproj create mode 100755 compat/zlib/contrib/vstudio/vc10/minizip.vcxproj.filters create mode 100755 compat/zlib/contrib/vstudio/vc10/minizip.vcxproj.user create mode 100755 compat/zlib/contrib/vstudio/vc10/testzlib.vcxproj create mode 100755 compat/zlib/contrib/vstudio/vc10/testzlib.vcxproj.filters create mode 100755 compat/zlib/contrib/vstudio/vc10/testzlib.vcxproj.user create mode 100755 compat/zlib/contrib/vstudio/vc10/testzlibdll.vcxproj create mode 100755 compat/zlib/contrib/vstudio/vc10/testzlibdll.vcxproj.filters create mode 100755 compat/zlib/contrib/vstudio/vc10/testzlibdll.vcxproj.user create mode 100755 compat/zlib/contrib/vstudio/vc10/zlib.rc create mode 100755 compat/zlib/contrib/vstudio/vc10/zlibstat.vcxproj create mode 100755 compat/zlib/contrib/vstudio/vc10/zlibstat.vcxproj.filters create mode 100755 compat/zlib/contrib/vstudio/vc10/zlibstat.vcxproj.user create mode 100755 compat/zlib/contrib/vstudio/vc10/zlibvc.def create mode 100755 compat/zlib/contrib/vstudio/vc10/zlibvc.sln create mode 100755 compat/zlib/contrib/vstudio/vc10/zlibvc.vcxproj create mode 100755 compat/zlib/contrib/vstudio/vc10/zlibvc.vcxproj.filters create mode 100755 compat/zlib/contrib/vstudio/vc10/zlibvc.vcxproj.user create mode 100755 compat/zlib/contrib/vstudio/vc11/miniunz.vcxproj create mode 100755 compat/zlib/contrib/vstudio/vc11/minizip.vcxproj create mode 100755 compat/zlib/contrib/vstudio/vc11/testzlib.vcxproj create mode 100755 compat/zlib/contrib/vstudio/vc11/testzlibdll.vcxproj create mode 100755 compat/zlib/contrib/vstudio/vc11/zlib.rc create mode 100755 compat/zlib/contrib/vstudio/vc11/zlibstat.vcxproj create mode 100755 compat/zlib/contrib/vstudio/vc11/zlibvc.def create mode 100755 compat/zlib/contrib/vstudio/vc11/zlibvc.sln create mode 100755 compat/zlib/contrib/vstudio/vc11/zlibvc.vcxproj create mode 100755 compat/zlib/contrib/vstudio/vc9/miniunz.vcproj create mode 100755 compat/zlib/contrib/vstudio/vc9/minizip.vcproj create mode 100755 compat/zlib/contrib/vstudio/vc9/testzlib.vcproj create mode 100755 compat/zlib/contrib/vstudio/vc9/testzlibdll.vcproj create mode 100755 compat/zlib/contrib/vstudio/vc9/zlib.rc create mode 100755 compat/zlib/contrib/vstudio/vc9/zlibstat.vcproj create mode 100755 compat/zlib/contrib/vstudio/vc9/zlibvc.def create mode 100755 compat/zlib/contrib/vstudio/vc9/zlibvc.sln create mode 100755 compat/zlib/contrib/vstudio/vc9/zlibvc.vcproj create mode 100755 compat/zlib/crc32.c create mode 100755 compat/zlib/crc32.h create mode 100755 compat/zlib/deflate.c create mode 100755 compat/zlib/deflate.h create mode 100755 compat/zlib/doc/algorithm.txt create mode 100755 compat/zlib/doc/rfc1950.txt create mode 100755 compat/zlib/doc/rfc1951.txt create mode 100755 compat/zlib/doc/rfc1952.txt create mode 100755 compat/zlib/doc/txtvsbin.txt create mode 100755 compat/zlib/examples/README.examples create mode 100755 compat/zlib/examples/enough.c create mode 100755 compat/zlib/examples/fitblk.c create mode 100755 compat/zlib/examples/gun.c create mode 100755 compat/zlib/examples/gzappend.c create mode 100755 compat/zlib/examples/gzjoin.c create mode 100755 compat/zlib/examples/gzlog.c create mode 100755 compat/zlib/examples/gzlog.h create mode 100755 compat/zlib/examples/zlib_how.html create mode 100755 compat/zlib/examples/zpipe.c create mode 100755 compat/zlib/examples/zran.c create mode 100755 compat/zlib/gzclose.c create mode 100755 compat/zlib/gzguts.h create mode 100755 compat/zlib/gzlib.c create mode 100755 compat/zlib/gzread.c create mode 100755 compat/zlib/gzwrite.c create mode 100755 compat/zlib/infback.c create mode 100755 compat/zlib/inffast.c create mode 100755 compat/zlib/inffast.h create mode 100755 compat/zlib/inffixed.h create mode 100755 compat/zlib/inflate.c create mode 100755 compat/zlib/inflate.h create mode 100755 compat/zlib/inftrees.c create mode 100755 compat/zlib/inftrees.h create mode 100755 compat/zlib/make_vms.com create mode 100755 compat/zlib/msdos/Makefile.bor create mode 100755 compat/zlib/msdos/Makefile.dj2 create mode 100755 compat/zlib/msdos/Makefile.emx create mode 100755 compat/zlib/msdos/Makefile.msc create mode 100755 compat/zlib/msdos/Makefile.tc create mode 100755 compat/zlib/nintendods/Makefile create mode 100755 compat/zlib/nintendods/README create mode 100755 compat/zlib/old/Makefile.emx create mode 100755 compat/zlib/old/Makefile.riscos create mode 100755 compat/zlib/old/README create mode 100755 compat/zlib/old/descrip.mms create mode 100755 compat/zlib/old/os2/Makefile.os2 create mode 100755 compat/zlib/old/os2/zlib.def create mode 100755 compat/zlib/old/visual-basic.txt create mode 100755 compat/zlib/qnx/package.qpg create mode 100755 compat/zlib/test/example.c create mode 100755 compat/zlib/test/infcover.c create mode 100755 compat/zlib/test/minigzip.c create mode 100755 compat/zlib/treebuild.xml create mode 100755 compat/zlib/trees.c create mode 100755 compat/zlib/trees.h create mode 100755 compat/zlib/uncompr.c create mode 100755 compat/zlib/watcom/watcom_f.mak create mode 100755 compat/zlib/watcom/watcom_l.mak create mode 100755 compat/zlib/win32/DLL_FAQ.txt create mode 100755 compat/zlib/win32/Makefile.bor create mode 100755 compat/zlib/win32/Makefile.gcc create mode 100755 compat/zlib/win32/Makefile.msc create mode 100755 compat/zlib/win32/README-WIN32.txt create mode 100755 compat/zlib/win32/VisualC.txt create mode 100755 compat/zlib/win32/zlib.def create mode 100755 compat/zlib/win32/zlib1.rc create mode 100755 compat/zlib/zconf.h create mode 100755 compat/zlib/zconf.h.cmakein create mode 100755 compat/zlib/zconf.h.in create mode 100755 compat/zlib/zlib.3 create mode 100755 compat/zlib/zlib.3.pdf create mode 100755 compat/zlib/zlib.h create mode 100755 compat/zlib/zlib.map create mode 100755 compat/zlib/zlib.pc.cmakein create mode 100755 compat/zlib/zlib.pc.in create mode 100755 compat/zlib/zlib2ansi create mode 100755 compat/zlib/zutil.c create mode 100755 compat/zlib/zutil.h create mode 100755 configure create mode 100755 configure.in create mode 100755 demo.tcl create mode 100755 doc/default.css create mode 100755 doc/format-footer.inc create mode 100755 doc/format-header.inc create mode 100755 doc/format-middle.inc create mode 100755 doc/formats.htm create mode 100755 doc/img-bmp.man create mode 100755 doc/img-dted.man create mode 100755 doc/img-gif.man create mode 100755 doc/img-ico.man create mode 100755 doc/img-jpeg.man create mode 100755 doc/img-pcx.man create mode 100755 doc/img-pixmap.man create mode 100755 doc/img-png.man create mode 100755 doc/img-ppm.man create mode 100755 doc/img-ps.man create mode 100755 doc/img-raw.man create mode 100755 doc/img-sgi.man create mode 100755 doc/img-sun.man create mode 100755 doc/img-tga.man create mode 100755 doc/img-tiff.man create mode 100755 doc/img-window.man create mode 100755 doc/img-xbm.man create mode 100755 doc/img-xpm.man create mode 100755 doc/img.man create mode 100755 doc/index.htm create mode 100755 doc/install.htm create mode 100755 doc/library.htm create mode 100755 dted/ChangeLog create mode 100755 dted/Makefile.in create mode 100755 dted/aclocal.m4 create mode 100755 dted/configure create mode 100755 dted/configure.in create mode 100755 dted/dted.c create mode 100755 dted/readme create mode 100755 dted/tests/all.tcl create mode 100755 dted/tests/dted.test create mode 100755 dted/tests/e10n48.dt0 create mode 100755 gif/ChangeLog create mode 100755 gif/Makefile.in create mode 100755 gif/README create mode 100755 gif/aclocal.m4 create mode 100755 gif/configure create mode 100755 gif/configure.in create mode 100755 gif/gif.c create mode 100755 gif/tests/all.tcl create mode 100755 gif/tests/folder.gif create mode 100755 gif/tests/gif.test create mode 100755 ico/ChangeLog create mode 100755 ico/Makefile.in create mode 100755 ico/aclocal.m4 create mode 100755 ico/configure create mode 100755 ico/configure.in create mode 100755 ico/ico.c create mode 100755 ico/readme create mode 100755 ico/tests/all.tcl create mode 100755 ico/tests/ico.test create mode 100755 ico/tests/img.ico create mode 100755 init.c create mode 100755 jpeg/ChangeLog create mode 100755 jpeg/Makefile.in create mode 100755 jpeg/README create mode 100755 jpeg/aclocal.m4 create mode 100755 jpeg/configure create mode 100755 jpeg/configure.in create mode 100755 jpeg/jpeg.c create mode 100755 jpeg/tests/all.tcl create mode 100755 jpeg/tests/folder.jpg create mode 100755 jpeg/tests/jpeg.test create mode 100755 libjpeg/ChangeLog create mode 100755 libjpeg/DANGER create mode 100755 libjpeg/Makefile.in create mode 100755 libjpeg/README create mode 100755 libjpeg/aclocal.m4 create mode 100755 libjpeg/configure create mode 100755 libjpeg/configure.in create mode 100755 libjpeg/jerror.h create mode 100755 libjpeg/jpeglib.h create mode 100755 libjpeg/jpegtcl.c create mode 100755 libjpeg/jpegtcl.decls create mode 100755 libjpeg/jpegtcl.h create mode 100755 libjpeg/jpegtclConfig.sh.in create mode 100755 libjpeg/jpegtclDecls.h create mode 100755 libjpeg/jpegtclStubInit.c create mode 100755 libjpeg/jpegtclStubLib.c create mode 100755 libpng/ChangeLog create mode 100755 libpng/Makefile.in create mode 100755 libpng/aclocal.m4 create mode 100755 libpng/configure create mode 100755 libpng/configure.in create mode 100755 libpng/png.h create mode 100755 libpng/pngtcl.c create mode 100755 libpng/pngtcl.decls create mode 100755 libpng/pngtcl.h create mode 100755 libpng/pngtclConfig.sh.in create mode 100755 libpng/pngtclDecls.h create mode 100755 libpng/pngtclStubInit.c create mode 100755 libpng/pngtclStubLib.c create mode 100755 libtiff/ChangeLog create mode 100755 libtiff/Makefile.in create mode 100755 libtiff/README create mode 100755 libtiff/aclocal.m4 create mode 100755 libtiff/configure create mode 100755 libtiff/configure.in create mode 100755 libtiff/tiffio.h create mode 100755 libtiff/tifftcl.c create mode 100755 libtiff/tifftcl.decls create mode 100755 libtiff/tifftcl.h create mode 100755 libtiff/tifftclConfig.sh.in create mode 100755 libtiff/tifftclDecls.h create mode 100755 libtiff/tifftclStubInit.c create mode 100755 libtiff/tifftclStubLib.c create mode 100755 license.terms create mode 100755 msgs/de.msg create mode 100755 msgs/el.msg create mode 100755 msgs/en.msg create mode 100755 msgs/es.msg create mode 100755 msgs/fr.msg create mode 100755 msgs/ja.msg create mode 100755 msgs/nl.msg create mode 100755 pcx/ChangeLog create mode 100755 pcx/Makefile.in create mode 100755 pcx/aclocal.m4 create mode 100755 pcx/configure create mode 100755 pcx/configure.in create mode 100755 pcx/pcx.c create mode 100755 pcx/readme create mode 100755 pcx/tests/all.tcl create mode 100755 pcx/tests/hori.pcx create mode 100755 pcx/tests/hori_bw.pcx create mode 100755 pcx/tests/hori_bwmask.pcx create mode 100755 pcx/tests/hori_grey8.pcx create mode 100755 pcx/tests/hori_ind8.pcx create mode 100755 pcx/tests/hori_rle.pcx create mode 100755 pcx/tests/pcx.test create mode 100755 pixmap/ChangeLog create mode 100755 pixmap/Makefile.in create mode 100755 pixmap/README create mode 100755 pixmap/aclocal.m4 create mode 100755 pixmap/configure create mode 100755 pixmap/configure.in create mode 100755 pixmap/pixmap.c create mode 100755 pixmap/pixmapInt.h create mode 100755 pixmap/pixmapUnix.c create mode 100755 pixmap/pixmapWin.c create mode 100755 pixmap/tests/all.tcl create mode 100755 png/ChangeLog create mode 100755 png/Makefile.in create mode 100755 png/README create mode 100755 png/aclocal.m4 create mode 100755 png/configure create mode 100755 png/configure.in create mode 100755 png/png.c create mode 100755 png/tests/all.tcl create mode 100755 png/tests/folder.png create mode 100755 png/tests/png.test create mode 100755 ppm/ChangeLog create mode 100755 ppm/Makefile.in create mode 100755 ppm/aclocal.m4 create mode 100755 ppm/configure create mode 100755 ppm/configure.in create mode 100755 ppm/ppm.c create mode 100755 ppm/readme create mode 100755 ppm/tests/all.tcl create mode 100755 ppm/tests/hori_ascii.ppm create mode 100755 ppm/tests/hori_raw.ppm create mode 100755 ppm/tests/ppm.test create mode 100755 ppm/tests/teapot.ppm create mode 100755 ppm/tests/testimg.ppm create mode 100755 ps/ChangeLog create mode 100755 ps/Makefile.in create mode 100755 ps/README create mode 100755 ps/aclocal.m4 create mode 100755 ps/configure create mode 100755 ps/configure.in create mode 100755 ps/ps.c create mode 100755 ps/tests/all.tcl create mode 100755 ps/tests/folder.ps create mode 100755 ps/tests/logo.pdf create mode 100755 ps/tests/test.ps create mode 100755 raw/ChangeLog create mode 100755 raw/Makefile.in create mode 100755 raw/aclocal.m4 create mode 100755 raw/configure create mode 100755 raw/configure.in create mode 100755 raw/raw.c create mode 100755 raw/readme create mode 100755 raw/tests/all.tcl create mode 100755 raw/tests/folder.raw create mode 100755 raw/tests/raw.test create mode 100755 sgi/ChangeLog create mode 100755 sgi/Makefile.in create mode 100755 sgi/aclocal.m4 create mode 100755 sgi/configure create mode 100755 sgi/configure.in create mode 100755 sgi/readme create mode 100755 sgi/sgi.c create mode 100755 sgi/tests/all.tcl create mode 100755 sgi/tests/folder.rgb create mode 100755 sgi/tests/sgi.test create mode 100755 sun/ChangeLog create mode 100755 sun/Makefile.in create mode 100755 sun/aclocal.m4 create mode 100755 sun/configure create mode 100755 sun/configure.in create mode 100755 sun/readme create mode 100755 sun/sun.c create mode 100755 sun/tests/all.tcl create mode 100755 sun/tests/folder.ras create mode 100755 sun/tests/sun.test create mode 100755 tclconfig/README.txt create mode 100755 tclconfig/img.m4 create mode 100755 tclconfig/install-sh create mode 100755 tclconfig/tcl.m4 create mode 100755 tests/all create mode 100755 tests/all.tcl create mode 100755 tests/bmp.test create mode 100755 tests/bmp4r.bmp create mode 100755 tests/bmp8r.bmp create mode 100755 tests/defs create mode 100755 tests/dted.test create mode 100755 tests/e10n48.dt0 create mode 100755 tests/folder.bmp create mode 100755 tests/folder.gif create mode 100755 tests/folder.jpg create mode 100755 tests/folder.png create mode 100755 tests/folder.ps create mode 100755 tests/folder.ras create mode 100755 tests/folder.raw create mode 100755 tests/folder.rgb create mode 100755 tests/folder.tif create mode 100755 tests/folder.xbm create mode 100755 tests/folder.xpm create mode 100755 tests/gif.test create mode 100755 tests/hori.tga create mode 100755 tests/hori_bw.pcx create mode 100755 tests/hori_raw.ppm create mode 100755 tests/ico.test create mode 100755 tests/img.ico create mode 100755 tests/jpeg.test create mode 100755 tests/logo.pdf create mode 100755 tests/pcx.test create mode 100755 tests/png.test create mode 100755 tests/ppm.test create mode 100755 tests/raw.test create mode 100755 tests/sgi.test create mode 100755 tests/sun.test create mode 100755 tests/test.ps create mode 100755 tests/tga.test create mode 100755 tests/tiff.test create mode 100755 tests/visualtests/Readme.txt create mode 100755 tests/visualtests/testFrom.tcl create mode 100755 tests/visualtests/testFull.tcl create mode 100755 tests/visualtests/testSmall.tcl create mode 100755 tests/visualtests/testTo.tcl create mode 100755 tests/visualtests/utils/testGUI.tcl create mode 100755 tests/visualtests/utils/testImgs.tcl create mode 100755 tests/visualtests/utils/testReadWrite.tcl create mode 100755 tests/visualtests/utils/testUtil.tcl create mode 100755 tests/xbm.test create mode 100755 tests/xpm.test create mode 100755 tga/ChangeLog create mode 100755 tga/Makefile.in create mode 100755 tga/aclocal.m4 create mode 100755 tga/configure create mode 100755 tga/configure.in create mode 100755 tga/readme create mode 100755 tga/tests/all.tcl create mode 100755 tga/tests/hori.tga create mode 100755 tga/tests/tga.test create mode 100755 tga/tga.c create mode 100755 tiff/ChangeLog create mode 100755 tiff/Makefile.in create mode 100755 tiff/README create mode 100755 tiff/aclocal.m4 create mode 100755 tiff/configure create mode 100755 tiff/configure.in create mode 100755 tiff/tests/all.tcl create mode 100755 tiff/tests/folder.tif create mode 100755 tiff/tests/tiff.test create mode 100755 tiff/tiff.c create mode 100755 tiff/tiffInt.h create mode 100755 tiff/tiffJpeg.c create mode 100755 tiff/tiffPixar.c create mode 100755 tiff/tiffZip.c create mode 100755 tkv.tcl create mode 100755 tools/config.guess create mode 100755 tools/config.sub create mode 100755 tools/genStubs.tcl create mode 100755 tools/install-sh create mode 100755 tools/install.tcl create mode 100755 tools/ldAout.tcl create mode 100755 tools/mkinstalldirs create mode 100755 window/ChangeLog create mode 100755 window/Makefile.in create mode 100755 window/aclocal.m4 create mode 100755 window/configure create mode 100755 window/configure.in create mode 100755 window/readme create mode 100755 window/tests/all.tcl create mode 100755 window/window.c create mode 100755 xbm/ChangeLog create mode 100755 xbm/Makefile.in create mode 100755 xbm/aclocal.m4 create mode 100755 xbm/configure create mode 100755 xbm/configure.in create mode 100755 xbm/readme create mode 100755 xbm/tests/all.tcl create mode 100755 xbm/tests/folder.xbm create mode 100755 xbm/tests/xbm.test create mode 100755 xbm/xbm.c create mode 100755 xpm/ChangeLog create mode 100755 xpm/Makefile.in create mode 100755 xpm/aclocal.m4 create mode 100755 xpm/configure create mode 100755 xpm/configure.in create mode 100755 xpm/readme create mode 100755 xpm/tests/all.tcl create mode 100755 xpm/tests/folder.xpm create mode 100755 xpm/tests/xpm.test create mode 100755 xpm/xpm.c create mode 100755 zlib/ChangeLog create mode 100755 zlib/Makefile.in create mode 100755 zlib/aclocal.m4 create mode 100755 zlib/configure create mode 100755 zlib/configure.in create mode 100755 zlib/zlib.h create mode 100755 zlib/zlibtcl.c create mode 100755 zlib/zlibtcl.decls create mode 100755 zlib/zlibtcl.h create mode 100755 zlib/zlibtclConfig.sh.in create mode 100755 zlib/zlibtclDecls.h create mode 100755 zlib/zlibtclStubInit.c create mode 100755 zlib/zlibtclStubLib.c diff --git a/ANNOUNCE b/ANNOUNCE new file mode 100755 index 0000000..5faf92e --- /dev/null +++ b/ANNOUNCE @@ -0,0 +1,103 @@ +I'm happy to announce version 1.4.6 of the "tkImg" package +(formerly known as 'Img"). + +This package enhances Tk, adding support for many other Image formats. + +Changes compared to version 1.4.5: +- Fixed bug #85: Tk panic on exit when pixmap images have been created. +- Fixed bug #87: png darker in 1.4.5. + Changed behaviour of gamma handling: + Read: If no gamma is stored in PNG file, no gamma is set. + Previous behaviour was to set it to 0.45. + Write: No gamma value is written to PNG file. + Previous behaviour was to set it to 1.0. + Added 2 new PNG format options "-verbose" and "-gamma". + +Changes compared to version 1.4.4: +- Upgrade to libjpeg-9.2.0, libpng-1.6.21 +- Workaround for reading progressive JPEG images on Windows. +- Performance optimization under Windows for "-format window". + +Changes compared to version 1.4.3: +- Upgrade to libpng-1.6.19, libtiff-3.9.7 +- Disable jbig support, as this generally cannot be relied upon (Bug #81) + +Changes compared to version 1.4.2: +- Bug fix when writing GIF images. +- Bug fix when reading greyscale PNG images with alpha channel. +- Added target install-libraries to install without documentation generation. + +Changes compared to version 1.4.1: + +- Will build correctly on more platforms (TEA upgraded + to latest version 3.9) +- upgrade to zlib 1.2.8, libjpeg-8d +- Added format option "-alpha" to PNG reader to be compatible with Tk 8.6. +- Bug fixes in various parsers to avoid core dumps when specifying a + wrong format option. + +Changes compared to version 1.4: + +- Will build correctly on more platforms (TEA upgraded + to version 3.9) +- upgrade to zlib 1.2.7, libpng-1.4.12, libtiff-3.9.4, libjpeg-8c + +This version only works with Tcl/Tk 8.3 or higher (tested up to +8.6.1). If you are using Tk8.2 or lower, please stick with tkImg1.3 +(which is still available). + +Currently there are three identical source distributions: + tkimg145.zip (for Windows) (about 7.4 Mb) + tkimg1.4.5.tar.gz (for Unix) (about 6.6 Mb) + tkimg1.4.5.tar.bz2 (for Unix) (about 4.9 Mb) + +All these files can be downloaded from: + http://sourceforge.net/projects/tkimg/ + +The most recent info is always available at: + http://sourceforge.net/projects/tkimg/ + +See the README on how to build and use the packages. + +For PNG, JPEG and TIFF support the supporting packages have to be +build and installed. See the file README for more in-depth +explanations. + +For postscript you need Ghostscript (version 2.6 or higher) to be +available on your system. + +Many thanks to the following people (alphabetical): + +Paul Obermeier + Bugfixes and all new formats. +Roger E Critchlow Jr + BMP improvements. +Nick Ing-Simmons + XBM write function, perl-Tk port and many other useful + suggestions. +Andreas Kupries + Testing on Linux, and supplying original "makefile.vc" + files for the Windows port. +Ioi K. Lam + Pixmap image type (imgPmap.c, imgUnixPmap.c, imgWinPmap.c), + many functions of which are used in imgXPM.c as well. +Tom Lane + Wrote the JPEG handler (but I'm responsible for the + dynamical loading part). +Lolo + Original GIF87 write function. +Larry Virden + Bug reports and other useful remarks. +Mario Weilguni + Many improvements to imgXPM.c. + +Enjoy, + Jan Nijtmans + email: nijtmans@users.sourceforge.net + url: http://purl.oclc.org/net/nijtmans/ + + Andreas Kupries, ActiveState Corp + email: andreas_kupries@users.sourceforge.net (private) + akupries@shaw.ca (private) + andreask@activestate.com (work) + url: http://www.purl.org/NET/akupries/ diff --git a/ChangeLog b/ChangeLog new file mode 100755 index 0000000..c3ca1a0 --- /dev/null +++ b/ChangeLog @@ -0,0 +1,923 @@ +2012-09-16 Jan Nijtmans + + * renumber tkimg version to 1.4.2 + +2013-09-10 Jan Nijtmans + + * upgrade to libjpeg version 8d + +2013-05-12 Jan Nijtmans + + * upgrade to zlib 1.2.8 + +2012-07-22 Jan Nijtmans + + * upgrade to libpng 1.4.12 + * renumber tkimg version to 1.4.1 + +2012-06-10 Jan Nijtmans + + * upgrade to zlib 1.2.7 + +2011-11-27 Harald Oehlmann + + * bmp.c: image resolution parameter may be given when saving bmp + (TkImg Feature Request 3062062) + +2011-11-17 Jan Nijtmans + + * upgrade to libjpeg version 8c + +2011-07-26 Jan Nijtmans + + * upgrade to latest TEA tcl.m4 and install.sh + * upgrade to libpng 1.4.8 + +2011-04-22 Jan Nijtmans + + * upgrade to libpng 1.4.7 + +2010-12-14 Jan Nijtmans + + * upgrade to latest TEA tcl.m4 and autoconf 2.68 + +2010-11-26 Jan Nijtmans + + * Upgrade to TEA 3.9 + +2010-09-17 Jan Nijtmans + + * + * Released and tagged Tkimg 1.4 ======================== + * + +2010-08-30 Jan Nijtmans + + * license.terms: Fix DFARs note for number-adjusted rights clause + +2010-07-06 Jan Nijtmans + + * genStubs.tcl: "generic" argument is no longer necessary when + there are no suppressors. + * [tkimg-Bugs-3011001] Only support accessing tkImg + procs through stub table implemented for libpng + +2010-06-30 Jan Nijtmans + + * upgrade to libtiff 3.9.4 + +2010-06-28 Jan Nijtmans + + * upgrade to libpng 1.4.3 + * backport various ttkGenStubs.tcl improvements + to genStubs.tcl + +2010-06-17 Jan Nijtmans + + * upgrade to libjpeg version 8b + +2010-06-04 Jan Nijtmans + + * [tkimg-Bugs-3011001] Only support accessing tkImg + procs through stub table implemented for base and zlib + +2010-05-11 Jan Nijtmans + + * upgrade to libpng 1.4.2 + +2010-05-04 Jan Nijtmans + + * Make type "boolean" available everywhere, so individual + handlers don't need to define Boln any more. + * Formatting. + * Make --enable-symbols build on MSVC a little bit + closer to reality and explain disabled warnings. + +2010-05-03 Jan Nijtmans + + * Use PNGTCLAPI in stead of EXTERN in tkImg png package + * xbm fix unused variable + +2010-04-30 Andreas Kupries + + * Fix building tkimg --disable-shared + +2010-04-28 Jan Nijtmans + + * More MODULE_SCOPE functions in base + * Use TKIMGAPI in stead of EXTERN in tkImg base package + * Fix various gcc and MSVC warnings + * upgrade to libpng 1.4.1 + +2010-04-23 Jan Nijtmans + + * upgrade to zlib 1.2.5 + +2010-04-14 Jan Nijtmans + + * Regenerate all configure scripts with latest TEA tcl.m4 + +2010-04-09 Jan Nijtmans + + * Only build pkgIndex.tcl when something changed. + +2010-04-07 Jan Nijtmans + + * TkimgInitUtilities() always succeeds, and does not + return TCL_ERROR/TCL_OK. + * Eliminate forced dependancy for aqua on + ::tk::unsupported::MacWindowStyle + * Eliminate msgcat compatibility layer + +2010-04-01 Jan Nijtmans + + * [Bug 2975449] Kill the Tk 8.2/8.3 ifdeffery - at + least the runtime swizzle (I don't consider + this a bug at all, because it worked fine + as long as it was needed!) + * [Bug 2907616] configure ignores --mandir switch + +2010-03-31 Jan Nijtmans + + * Sync with latest TEA (tcl.m4), regenerated all + configure scripts with autoconf-2.65. + * Sync genStubs.tcl with latest one from Tcl 8.6, + regenerated all *Decls.h files. All stubs + pointers are const now. + +2009-07-26 Jan Nijtmans + + * Sync with latest TEA (tcl.m4), regenerated all + configure scripts. + +2009-04-28 Jan Nijtmans + + * Fix [Bug #82910] teacup requires libX11 to run + +2009-03-12 Stuart Cassoff + + * various fixes to tcl.m4 [Bug #2669308] (Stuart Cassoff) + (To be checked in in sampleextension as well.) + * fix [Bug #2669482] Can't 'make test' + +2009-03-12 Jan Nijtmans + + * fix "make checkstubs" + * a few CONST84 eliminations + +2009-03-09 Jan Nijtmans + + * Revert to using "ld -b" in stead of "${CC} -b" for + HP-UX-11; it doesn't work in 64-bit mode. + +2009-03-03 Jan Nijtmans + + * fix "make genstubs" for libpng, libtiff, libz, libjpeg + * PNG build fix + +2009-02-24 Jan Nijtmans + + * gif handler cleanup + * Allow -index N option for TIFF images too [Feature Request #706277] + +2009-02-23 Jan Nijtmans + + * Attempt to fix HP-UX Itanium 64-bit build + * revert r177 change to pkgIndex.tcl: it broke TEApot package + handling. + +2009-02-17 Jan Nijtmans + + * Move ./libz to ./compat/zlib and ./libz/tcl to ./zlib + * Move ./libjpeg to ./compat/libjpeg and ./libjpeg/tcl to ./libjpeg + * Move ./libpng to ./compat/libpng and ./libpng/tcl to ./libpng + * Move ./libtiff to ./compat/libtiff and ./libtiff/tcl to ./libtiff + * Require Tcl/Tk 8.3 for libz, libpng, libtiff and libjpeg + +2009-01-12 Jan Nijtmans + + * upgrade to libpng 1.2.34 + +2009-01-12 Jan Nijtmans + + * No longer Panic when an out-of-memory error occurs, + when compiled with Tcl/Tk 8.5 or later and running with + Tcl/Tk 8.5 and later (Tk bug #2477446) + +2009-01-05 Jan Nijtmans + + * Two more stub functions for improved Tcl 8.5 support. + * Make sure that in C preprocessor directives the "#" + character is the first character on the line. + +2008-11-13 Jan Nijtmans + + * For gcc, from now on use as standard CFLAGS: + CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer" + CFLAGS_WARNING="-Wall -Wwrite-strings" + * Upgrade to GNU Autoconf 2.63 + +2008-11-13 Jan Nijtmans + + * Create 1.3.x branch. Now trunk is available for + tkImg 1.4 development. + +2008-11-13 Andreas Kupries + + * Fix win32 compile issue with zlib, mask gzprintf + +2008-11-04 Paul Obermeier + + * Added new (visual) test suite for checking the different + ways of reading and writing images in the various formats. + +2008-11-04 Paul Obermeier + + * Updated demo program to include all available image + formats. Also added additional tests for all image formats. + +2008-11-04 Paul Obermeier + + * Added two new format handlers: DTED for displaying + terrain elevation data files as an image. + RAW for displaying files filled with raw matrix data in 8-bit + integer, 16-bit integer or 32-bit float binary data. + Note: These very special format handlers are not loaded with + a "package require Img", but must be loaded explicitly with + "package require img::dted" and "package require img::raw". + +2008-11-04 Paul Obermeier + + * Fixed issue #1963052: + Added correct base64 encoded image for format ICO. + Added correct base64 encoded image for format SGI. + Also added code to fill unused bytes of file header with + zeros to get identical test results. + Removed test for format pixmap. + +2008-10-27 Jan Nijtmans + + * Fixed issue #762108: configure can now finds the + tclConfig.sh and tkConfig.sh files from a parallel + Tcl and Tk build. With this change, tkimg now builds + out-of-the-box on mingw32. + +2008-10-22 Jan Nijtmans + + * Eliminate "CONST" everywhere, replacing it with "const" + +2008-10-22 Jan Nijtmans + + * CONST -> const in *.decls, genenerate all header files + * white spacing fixes. + * eliminate genStubs.tcl in other places than the main "tools" + +2008-10-22 Jan Nijtmans + + * Introduce the use of CONST86 for compiling against Tcl 8.6 + +2008-11-04 Paul Obermeier + + * Make SGI parser 64-bit aware: Convert long's to int's. + +2008-02-06 Jan Nijtmans + + * Updated genStubs.tcl to match with the version in Tcl8.5.1 + * re-generated all related files (*Decls.h and *StubInit.c) + +2008-02-05 Jan Nijtmans + + * Fixed issue #1081827: tkImgGIF.c is now thread-safe. + +2008-02-04 Jan Nijtmans + + * Fixed a buffer overflow (CVE-2006-4484) + +2007-12-19 Jan Nijtmans + + * upgrade to libpng 1.2.24 + +2006-08-04 Jan Nijtmans + + * upgrade to libpng 1.2.12 + +2006-06-09 Jan Nijtmans + + * upgrade to libtiff 3.8.2 + +2006-06-09 Jan Nijtmans + + * upgrade to libpng 1.2.10 + +2006-06-06 Paul Obermeier + + * bmp/bmp.c: 1. Added read parser for 16 and 32 bit formats. Needed + when reading images from the Windows clipboard. + (See http://wiki.tcl.tk/15647 for example) + 2. Corrected previous rleBuf fix. + +2006-06-01 Jan Nijtmans + + * fix a few compiler warnings when using the Intel C-compiler. Suggested by David Binderman. + +2006-05-02 Jan Nijtmans + + * various cleanups and elimination of compiler warnings. No change in functionality. + +2006-05-02 Jan Nijtmans + + * implement real LZW compression in GIF encoder + +2006-03-22 Jan Nijtmans + + * windows-specific bug-fixes for TEA + +2006-03-22 Jan Nijtmans + + * add eclipse project files (experimental) + +2006-01-25 Andreas Kupries + + * base/Makefile.in: TEA 3.5 update. Added missing Tk + * bmp/Makefile.in: definitions and variables in. Before + * gif/Makefile.in: $prefix was used to locate headers, now + * ico/Makefile.in: we have to refer to the Tk locations + * jpeg/Makefile.in: explicitly. + * pcx/Makefile.in: + * pixmap/Makefile.in: + * png/Makefile.in: + * ppm/Makefile.in: + * ps/Makefile.in: + * sgi/Makefile.in: + * sun/Makefile.in: + * tga/Makefile.in: + * tiff/Makefile.in: + * window/Makefile.in: + * xbm/Makefile.in: + * xpm/Makefile.in: + +2006-01-24 Andreas Kupries + + * tclconfig/tcl.m4: Updated to TEA 3.5 + * configure.in: Ditto. + * configure: Regenerated. + * base/configure.in: + * base/configure: + * bmp/configure.in: + * bmp/configure: + * gif/configure.in: + * gif/configure: + * ico/configure.in: + * ico/configure: + * jpeg/configure.in: + * jpeg/configure: + * libjpeg/tcl/configure.in: + * libjpeg/tcl/configure: + * libpng/tcl/configure.in: + * libpng/tcl/configure: + * libtiff/tcl/configure.in: + * libtiff/tcl/configure: + * libz/tcl/configure.in: + * libz/tcl/configure: + * pcx/configure.in: + * pcx/configure: + * pixmap/configure.in: + * pixmap/configure: + * png/configure.in: + * png/configure: + * ppm/configure.in: + * ppm/configure: + * ps/configure.in: + * ps/configure: + * sgi/configure.in: + * sgi/configure: + +2005-08-17 Andreas Kupries + + * libz: Updated to version 1.2.3 of libz. + * libz/tcl: Changed version of wrapper to 1.2.3, synchronized to + version of libz. + +2005-06-13 Andreas Kupries + + * Makefile.in: Updated everything to TEA 3.2. tclconfig and contained files is now central. + * aclocal.m4: Customization of 'init.c' template file now in the configure script. Albeit + * configure: still not fully standard. Removed lots of old cruft. + * configure.in: + * init.c: + * base/Makefile.in: + * base/aclocal.m4: + * base/configure: + * base/configure.in: + * base/pkgIndex.tcl.in: + * base/tkimg.c: + * base/tkimgConfig.sh.in: + * base/tkimgStubLib.c: + * bmp/Makefile.in: + * bmp/configure: + * bmp/configure.in: + * gif/Makefile.in: + * gif/configure: + * gif/configure.in: + * ico/Makefile.in: + * ico/configure: + * ico/configure.in: + * jpeg/Makefile.in: + * jpeg/configure: + * jpeg/configure.in: + * libjpeg/config.guess: + * libjpeg/config.sub: + * libjpeg/tcl/Makefile.in: + * libjpeg/tcl/aclocal.m4: + * libjpeg/tcl/configure: + * libjpeg/tcl/configure.in: + * libjpeg/tcl/jpegtcl.c: + * libjpeg/tcl/jpegtclConfig.sh.in: + * libpng/tcl/Makefile.in: + * libpng/tcl/aclocal.m4: + * libpng/tcl/configure: + * libpng/tcl/configure.in: + * libpng/tcl/pngtcl.c: + * libpng/tcl/pngtclConfig.sh.in: + * libtiff/libtiff/tiff.h: + * libtiff/tcl/Makefile.in: + * libtiff/tcl/aclocal.m4: + * libtiff/tcl/configure: + * libtiff/tcl/configure.in: + * libtiff/tcl/tifftcl.c: + * libtiff/tcl/tifftclConfig.sh.in: + * libz/tcl/Makefile.in: + * libz/tcl/aclocal.m4: + * libz/tcl/configure: + * libz/tcl/configure.in: + * libz/tcl/zlibtcl.c: + * libz/tcl/zlibtcl.h: + * libz/tcl/zlibtclConfig.sh.in: + * pcx/Makefile.in: + * pcx/configure: + * pcx/configure.in: + * pixmap/Makefile.in: + * pixmap/configure: + * pixmap/configure.in: + * pixmap/pixmap.c: + * png/Makefile.in: + * png/configure: + * png/configure.in: + * ppm/Makefile.in: + * ppm/configure: + * ppm/configure.in: + * ps/Makefile.in: + * ps/configure: + * ps/configure.in: + * sgi/Makefile.in: + * sgi/configure: + * sgi/configure.in: + +2004-08-18 Andreas Kupries + + * + * Released and tagged Tkimg 1.3 ======================== + * + +2004-08-16 Andreas Kupries + + * Updated some hardwired version information in png, zlib, and + tiff. + +2004-08-13 Andreas Kupries + + * libz/tcl: Changed version of wrapper to 1.2.1, synchronized to + version of libz. + + * libpng/tcl: Changed version of wrapper to 1.2.6, synchronized to + version of libpng. + + * libtiff/tcl: Changed version of wrapper to 3.6.1, synchronized to + version of libtiff. + +2004-08-13 Andreas Kupries + + * libtiff: Updated libtiff from version 3.5.5 to 3.6.1. + * libtiff/tcl: Updated to handle the new version of libtiff. + +2004-08-12 Andreas Kupries + + * libpng: Updated libpng from version 1.0.8 to 1.2.6rc5. + * libpng/tcl: Updated to handle the new version of libpng. + +2004-08-12 Andreas Kupries + + * libz: Updated zlib from version 1.1.3 to 1.2.1. + * libz/tcl: Updated to handle the new version of zlib. + +2004-08-12 Andreas Kupries + + * ico/ico.c: The last change made to these files, not + * sun/sun.c: recorded in the ChangeLog [*], caused them to + * sgi/sgi.c: be stored back into the CVS in DOS format. + * tga/tga.c: This screwed up the compile, more precise, + * pcx/pcx.c: the continuation lines in the code were not + recognized anymore. + + [*] cvs annotate claims that the change was made on July 27. + +2004-06-03 Andreas Kupries + + * base/tkimgPPB.c: + * base/tkimg.h: Added conditional definition for Tk_PhotoExpand + * bmp/bmp.c: (named tkimg_PhotoExpand). Changed all occurences + * gif/gif.c: if Tk_PhotoExpand to the new definition. This + * ico/ico.c: takes care of a change between Tk 8.4 and 8.5 + * jpeg/jpeg.c: + * libjpeg/tcl/jpegtcl.c: + * pcx/pcx.c: + * png/png.c: + * ppm/ppm.c: + * ps/ps.c: + * sgi/sgi.c: + * sun/sun.c: + * tga/tga.c: + * window/window.c: + * xbm/xbm.c: + * xpm/xpm.c: + +2003-04-04 Andreas Kupries + + * configure: + * base/configure: + * base/tclconfig/tcl.m4: + * bmp/configure: + * gif/configure: + * ico/configure: + * jpeg/configure: + * libjpeg/tcl/configure: + * libjpeg/tcl/tclconfig/tcl.m4: + * libpng/tcl/configure: + * libpng/tcl/tclconfig/tcl.m4: + * libtiff/tcl/configure: + * libtiff/tcl/tclconfig/tcl.m4: + * libz/tcl/configure: + * libz/tcl/tclconfig/tcl.m4: + * pcx/configure: + * pixmap/configure: + * png/configure: + * ppm/configure: + * ps/configure: + * sgi/configure: + * sun/configure: + * tclconfig/tcl.m4: + * tga/configure: + * tiff/configure: + * window/configure: + * xbm/configure: + * xpm/configure: Updated to newest tcl.m4, regenerated + configure's. + +2003-03-24 Andreas Kupries + + * doc/img-ps.man: Fix of typo reported by doctools. + +2003-03-13 Andreas Kupries + + * doc/img-ps.man: Extended with a section about requirements, + because this format relies on the presence of 'gs' + (ghostscript). + +2003-03-09 Paul Obermeier + + * pcx/pcx.c: Fixed incorrect usage of Tcl_AppendResult, + * sun/sun.c: which could cause core dumps. + * tga/tga.c: + + * pcx/pcx.c: Improved heuristics for better format matching. + + * base/pkgIndex.tcl.in: Rearranged order of required packages + for better format matching. + + * doc/img-ico.man: Updated documentation. + * doc/img-pcx.man: + * doc/img-ppm.man: + * doc/img-sgi.man: + * doc/img-sun.man: + * doc/img-tga.man: + +2003-03-04 Andreas Kupries + + * doc/format-footer.inc: Better see-also and keywording. + * doc/img-ps.man: + * doc/img.man: + + * doc/img-png.man: Small fix in manpage, command was broken over + two lines, which is illegal. + +2003-02-26 Andreas Kupries + + * configure: Fixed hangup on Linux systems where arguments + * configure.in: to cc in the variable CC caused the subordinate + configure of tiff to choke (A which command + hanged itself). + + * bmp/tests/bmp.test: Updated the testsuite to use the new 'img::*' + * gif/tests/gif.test: package names instead of the old 'tkimg::*'. + * ico/tests/ico.test: Thanks to Don Porter + * jpeg/tests/jpeg.test: for noticing this. Patch also by him. + * pcx/tests/pcx.test: + * pixmap/tests/pixmap.test: + * png/tests/png.test: + * ppm/tests/ppm.test: + * sgi/tests/sgi.test: + * sun/tests/sun.test: + * tga/tests/tga.test: + * tiff/tests/tiff.test: + * xbm/tests/xbm.test: + * xpm/tests/xpm.test: + +2003-02-12 Andreas Kupries + + * README: Removed format documentation from the file. Added + reference to manpages, and doctools. + + * Completed documentation work. + +2003-02-06 Andreas Kupries + + * doc/img.man: Started to work on new user documentation. + * doc/img-bmp.man: Using the doctools format for easy writing + * doc/img-gif.man: and easy conversion to other formats. + * doc/img-ico.man: + * doc/img-jpeg.man: Given the uniformity of most of the + * doc/img-pcx.man: handlers a template system is used + * doc/img-pixmap.man: (doctools extended to handle [include] + * doc/img-png.man: files, and allow parameterization through + * doc/img-ppm.man: variables ([vset] command). + * doc/img-ps.man: + * doc/img-sgi.man: + * doc/img-sun.man: + * doc/img-tga.man: + * doc/img-tiff.man: + * doc/img-window.man: + * doc/img-xbm.man: + * doc/img-xpm.man: + * doc/img.man: + + * doc/format-footer.inc: Template files, included by most of + * doc/format-header.inc: the handler manpages. + * doc/format-middle.inc: + + +2003-01-23 Andreas Kupries + + * Touched all sub-modules, added -I/path/to/sources/of/module/base + so that they are able to find the tkimg.h header even if base is + not installed yet. Same principle as for access to the jpegtcl, + etc. headers. + +2003-01-21 Andreas Kupries + + * configure: Fixed [Tkimg bug 655408] reported by Heinz-Detlev + * configure.in: Koch . The change in + * Makefile.in: aclocal.m4 fixing the problem with the propagation + of options to the sub-configure files also allows + us to use a simple 'make all' when compiling the + individual modules. Installation is not required + for them to find their requirements. Removed the + macro AC_PREFIX_PROGRAM(tclsh) and subsequent + conditionals from the master configure.in. We have + no need of special code for --prefix / + --exec-prefix in the master. The standard code + supplied by autoconf itself is just + fine. Regenerated the configure file. + +2003-01-08 Andreas Kupries + + * aclocal.m4: Added this file, was missing. Fixed bug in + TEA_CONFIG_COLLECT. + +2002-12-09 Andreas Kupries + + * configure.in: + * configure: + * aclocal.m4: + * Makefile.in: New master files for building all packages in + the extension. The installation collects all shared libraries in + one directory, using a big package index file for all packages. + + * base/: configure.in: Added DPACKAGE, is now 'img::base' instead + of 'tkimg'. + + * bmp, gif, ico, jpeg, pcx, pixmap, png, ppm, ps, sgi, sun, tga, + tiff, window, xbm, xpm: + Changed 'tkimg::' to 'img::' + +2002-12-06 Andreas Kupries + + * bmp: + * gif: + * jpeg: + * png: + * tiff: + * xpm: + * xbm: Created testsuites for these handlers. Essentially the + existing big testsuite was split into per handler + testsuites. All pass. + + * sun: + * sgi: + * ico: + * pcx: + * ppm: + * tga: Added testsuites, templated upon the original ones. + + SGI has trouble. What goes in, does not come out exactly the + same. I am not sure if there is a bug, or if there is some + intentional change made by the handler. + + * ps: (+pdf) + * window: + * pixmap: Without testsuites. + + * init.c (_Init): Had to be changed to use '1.3' too. + +2002-12-04 Andreas Kupries + + * tkimg/base/tkimg.c: + * tkimg/bmp/Makefile.in: + * tkimg/gif/Makefile.in: + * tkimg/ico/Makefile.in: + * tkimg/init.c: + * tkimg/jpeg/Makefile.in: + * tkimg/libjpeg/tcl/jpegtcl.c: + * tkimg/libpng/tcl/pngtcl.c: + * tkimg/libtiff/tcl/tifftcl.c: + * tkimg/libz/tcl/zlibtcl.c: + * tkimg/pcx/Makefile.in: + * tkimg/pixmap/Makefile.in: + * tkimg/pixmap/configure: + * tkimg/pixmap/configure.in: + * tkimg/pixmap/pixmap.c: + * tkimg/pixmap/pixmapInt.h: + * tkimg/png/Makefile.in: + * tkimg/ppm/Makefile.in: + * tkimg/ps/Makefile.in: + * tkimg/sgi/Makefile.in: + * tkimg/sun/Makefile.in: + * tkimg/tga/Makefile.in: + * tkimg/tiff/Makefile.in: + * tkimg/window/Makefile.in: + * tkimg/xbm/Makefile.in: + * tkimg/xpm/Makefile.in: + + Smoothed out more trouble with DLLIMPORT / DLLEXPORT on + Windows. Fixed problems with building 'pixmap'. + +2002-12-03 Andreas Kupries + + * libjpeg/tcl: + * libpng/tcl: + * libz/tcl: + * libtiff/tcl: + * base: + + Weeded out discrepancies in definition versus usage of BUILD_xxx + macros controlling DLLEXPORT / DLLIMPORT on windows. The + capitalization in configure(.in) and header was different. + +2002-11-28 Andreas Kupries + + * ps/: New directory, PS + PDF handler (photo image types). + + * png/: New directory, PNG handler (photo image types). + + * tiff/: New directory, TIFF handler (photo image types). + + * window/: New directory, WINDOW handler (photo image + type). Conversion of the original Img sources to TEA 2 provided + by Paul Obermeier . + + * xpm/: New directory, XPM handler (photo image type). Conversion + of the original Img sources to TEA 2 provided by Paul Obermeier + . + + * xbm/: New directory, XBM handler (photo image type). Conversion + of the original Img sources to TEA 2 provided by Paul Obermeier + . + + * tga/: New directory, TGA handler (photo image type). Code + provided by Paul Obermeier . + + * sun/: New directory, SUN handler (photo image type). Code + provided by Paul Obermeier . + + * sgi/: New directory, SGI handler (photo image type). Code + provided by Paul Obermeier . + + * ppm/: New directory, PPM handler (photo image type). Code + provided by Paul Obermeier . + + * pcx/: New directory, PCX handler (photo image type). Code + provided by Paul Obermeier . + + * ico/: New directory, ICO handler (photo image type). Code + provided by Paul Obermeier . + +2002-11-26 Andreas Kupries + + * init.c: Extended to allow registration of a second format. This + format is able to share functions with the first one. Current + user for this feature: The ps/pdf combo handler. + +2002-11-19 Andreas Kupries + + * init.c: New file. Contains generic initialization code for a + photo image type. Parameterized by the individual format + handlers with the package name (in various forms). First user is + 'tkimg::bmp'. + + * bmp/: New directory, BMP handler (photo image type). + * gif/: s.a, GIF handler (photo image type). + * jpeg/: s.a, JPEG handler (photo image type). + +2002-11-18 Andreas Kupries + + * base: New directory. Base package for format handlers to draw + upon. Build system based on TEA 2. Exports a stub table. The + source code is a modified copy of the relevant sources in the + main directory, making this package completely independent of + the existing sources. + +2002-11-18 Andreas Kupries + + * libz/tcl: + * libpng/tcl: + * libjpeg/tcl: + * libtiff/tcl: New directories, tcl packages wrapping around the + support libraries, exporting their functionality via a stub + table. Based on TEA 2. First step in the reorganization of the + whole code base for easier configuration and building. The code + of the support libraries is linked directly into the wrapper + libraries. This means that the wrappers do not use support + libraries installed on the system. Support for this will come at + a later stage. + + * libpng/png.c: Added casts to prevent compiler error. + * imgInt.h: Fixed small typo. + +2002-10-15 Andreas Kupries + + * configure.in: Changed to propagate an initial CFLAGS value to + the final definition. A TEA condition (SHARED_BUILD == 1) + squashed it, causing it the build system to loose the + +DAportable we specify for the AS PA-RISC2.2 build host. This is + a problem for _all_ TEA and TEA 2 based configure files. + +2002-10-04 Andreas Kupries + + * libjpeg/configure: + * libtiff/tiff.h: + * configure.in: + * Makefile.in: + * imgTIFF.c: Folding a number of band-aid patches to make tkImg + compile on the ActiveState hosts back into the sources. + + When using gcc have to link -lgcc into the main, png, and tiff + libraries. Have to propagate host specification to subordniate + configure scripts. Have to explicitly link in '-lm -lc' on + AIX. Disable a number of typedef's in the TIFF code which are + provided by AIX headers. Avoid unwanted usage of the memcpy + macro on AIX. + +2002-09-25 Jeff Hobbs + + * Makefile.in: better use of libdir. Add jpegconfdir to includes. + Add srcdir prefix for installation of *.tcl. (steffen) + + * configure: regen'd + * configure.in: add support for --with-tcl|tkinclude (steffen) + + * imgUnixPmap.c: #define XPutImage to empty for OSX. (steffen) + + * imgWindow.c: include X libs for OSX. (steffen) + +2002-06-19 Andreas Kupries + + * imgTIFF.c: Ifdef'd code choosing either stdarg.h or + varargs.h. The Tcl header does this selection since 8.1., and in + 8.4 it has changed significantly, causing the code here to + select a different file than tcl itself, causing compile + problems. Thanks to Joe English for his help in tracking this + down. + +2002-06-17 Andreas Kupries + + * imgBMP.c (CommonReadBMP): + * imgGIF.c (CommonReadGIF): + * imgJPEG.c (CommonReadJPEG): + * imgPS.c (ChanReadPDF): + * imgWindow.c (ObjReadWin): + * imgXPM.c (CommonReadXPM): + * imgUtil.c (ImgPhotoPutBlock): Updated to handle changes + introduced into Tk by TIP #98. + +2002-05-27 Andreas Kupries + + * tools/install.tcl: Fixed mismatched brackets. diff --git a/Makefile.in b/Makefile.in new file mode 100755 index 0000000..d65dce5 --- /dev/null +++ b/Makefile.in @@ -0,0 +1,195 @@ +# +# This file is a Makefile for IMG. If it has the name "Makefile.in" +# then it is a template for a Makefile; to generate the actual Makefile, +# run "./configure", which is a configuration script generated by the +# "autoconf" program (constructs like "@foo@" will get replaced in the +# actual Makefile. + +# This is the master makefile to compile all the packages in this +# extensions in one go. + +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +CYGPATH = @CYGPATH@ +SUBDIRS = @subdirs@ + +# +#---------------------------------------------------------------- +# Things you can change to personalize the Makefile for your own +# site (you can make these changes in either Makefile.in or +# Makefile, but changes to Makefile will get lost if you re-run +# the configuration script). +#---------------------------------------------------------------- + +# Directory in which the source of this extension can be found +srcdir = @srcdir@ + +# Default top-level directories in which to install architecture- +# specific files (exec_prefix) and machine-independent files such +# as scripts (prefix). The values specified here may be overridden +# at configure-time with the --exec-prefix and --prefix options +# to the "configure" script. + +prefix = @prefix@ +exec_prefix = @exec_prefix@ +libdir = @libdir@ +datarootdir = @datarootdir@ +includedir = @includedir@ +mandir = @mandir@ + +# Directory containing scripts supporting the work of this makefile +tool = $(srcdir)/tools + +INSTALL_OPTIONS = +INSTALL = $(SHELL) $(srcdir)/tclconfig/install-sh -c ${INSTALL_OPTIONS} +INSTALL_DATA_DIR = ${INSTALL} -d -m 755 +INSTALL_PROGRAM = ${INSTALL} -m 755 +INSTALL_DATA = ${INSTALL} -m 644 +INSTALL_SCRIPT = ${INSTALL_PROGRAM} +INSTALL_LIBRARY = ${INSTALL_DATA} + + +# The following definition can be set to non-null for special systems +# like AFS with replication. It allows the pathnames used for installation +# to be different than those used for actually reference files at +# run-time. INSTALL_ROOT is prepended to $prefix and $exec_prefix +# when installing files. +INSTALL_ROOT = + +# Directory where libimg.a is at run-time: +LIB_RUNTIME_DIR = $(libdir)/$(PACKAGE_NAME)$(PACKAGE_VERSION) + +# Directory in which to install the archive libimg.a: +LIB_INSTALL_DIR = $(INSTALL_ROOT)$(LIB_RUNTIME_DIR) + +# Directory in which to install the extended shell tclsh: +BIN_INSTALL_DIR = $(INSTALL_ROOT)$(exec_prefix)/bin + +# Directory in which to install the include file transform.h: +INCLUDE_INSTALL_DIR = $(INSTALL_ROOT)$(prefix)/include + +# Top-level directory in which to install manual entries: +MAN_INSTALL_DIR = $(INSTALL_ROOT)$(mandir) + +# Directory where libz, libpng and libjpeg are (or will be) installed. +IMG_INSTALL_DIR = $(INSTALL_ROOT)$(IMG_RUNTIME_DIR) + +# Some versions of make, like SGI's, use the following variable to +# determine which shell to use for executing commands: +SHELL = /bin/sh + +#---------------------------------------------------------------- +# The information below is modified by the configure script when +# Makefile is generated from Makefile.in. You shouldn't normally +# modify any of this stuff by hand. +#---------------------------------------------------------------- + +INSTALL_SHLIB = $(INSTALL) -m 555 +RANLIB = @RANLIB@ +SHLIB_SUFFIX = @SHLIB_SUFFIX@ +SHARED_BUILD = @SHARED_BUILD@ + +#---------------------------------------------------------------- + +#-------------------------------------------------------# + +default: all + +all: + for sub in $(SUBDIRS) ; \ + do \ + here=`pwd` && \ + cd $$sub && \ + $(MAKE) all || exit $$? && \ + cd $$here ; \ + done + +test: all + for sub in $(SUBDIRS) ; \ + do \ + test -d $(srcdir)/$$sub/tests || continue ; \ + here=`pwd` && \ + cd $$sub && \ + $(MAKE) top_builddir=$$here test || exit $$? && \ + cd $$here ; \ + done + +install-man: + mkdir -p $(MAN_INSTALL_DIR)/mann + for i in $(srcdir)/doc/*.man ; \ + do \ + dtplite -ext n -o $(MAN_INSTALL_DIR)/mann nroff $$i ; \ + done + +collate: all + rm -f pkgIndex.tcl + touch pkgIndex.tcl + for sub in $(SUBDIRS) ; \ + do \ + here=`pwd` && \ + cd $$sub && \ + $(MAKE) install \ + exec_prefix=$$here/Img/exec_prefix \ + prefix=$$here/Img/prefix \ + pkglibdir=$$here/Img/exec_prefix/lib/Img \ + libdir=$$here/Img/exec_prefix/lib \ + includedir=$$here/Img/prefix/include \ + DESTDIR= \ + || exit $$? && \ + cd $$here && \ + if test "x$(SHARED_BUILD)" = "x1"; then \ + cat Img/exec_prefix/lib/Img/pkgIndex.tcl >> pkgIndex.tcl ; \ + fi ; \ + done + chmod ugo+w Img/exec_prefix/lib/Img/pkgIndex.tcl + mv pkgIndex.tcl Img/exec_prefix/lib/Img/pkgIndex.tcl + chmod ugo+w Img/exec_prefix/lib/Img/pkgIndex.tcl + for p in Img/exec_prefix/lib/*.sh ; do \ + sed -e 's#$(libdir)/[^/ ]*\([/ ]\)#$(LIB_RUNTIME_DIR)\1#' \ + $$p > $$p.1 && mv -f $$p.1 $$p ; \ + done + +install-libraries: collate + mkdir -p $(INSTALL_ROOT)$(LIB_RUNTIME_DIR) + for p in Img/exec_prefix/lib/Img/* ; do \ + $(INSTALL_PROGRAM) $$p $(INSTALL_ROOT)$(LIB_RUNTIME_DIR)/`basename $$p` ; \ + done + mkdir -p $(INSTALL_ROOT)$(libdir) + for p in Img/exec_prefix/lib/*.sh ; do \ + $(INSTALL_PROGRAM) $$p $(INSTALL_ROOT)$(libdir)/`basename $$p` ; \ + done + if [ -n "`ls Img/prefix/include`" ]; then \ + mkdir -p $(INSTALL_ROOT)$(includedir) && \ + for p in Img/prefix/include/* ; do \ + $(INSTALL_DATA) $$p $(INSTALL_ROOT)$(includedir)/`basename $$p` ; \ + done; fi + +install: install-libraries install-man + +bindist: + +#-------------------------------------------------------# + +clean: + for sub in $(SUBDIRS) ; \ + do \ + here=`pwd` && \ + cd $$sub && \ + $(MAKE) clean || exit $$? && \ + cd $$here ; \ + done + rm -rf Img + +distclean: clean + rm -f config.* $(jpegdir)/config.log $(jpegdir)/config.status + rm -f Makefile + for sub in $(SUBDIRS) ; \ + do \ + here=`pwd` && \ + cd $$sub && \ + $(MAKE) distclean || exit $$? && \ + cd $$here ; \ + done + +#-------------------------------------------------------# +# DO NOT DELETE THIS LINE -- make depend depends on it. diff --git a/README b/README new file mode 100755 index 0000000..3577fe6 --- /dev/null +++ b/README @@ -0,0 +1,246 @@ + + Tcl/Tk Image formats (TkImg) + (Version 1.4 / September 2010) + + Jan Nijtmans, Andreas Kupries, Paul Obermeier + +This file contains a collection of format handlers for the Tk photo +image type, and a new image type, pixmaps. It can be used in +combination with Tcl/Tk 8.3 or later but 8.5.9 (or 8.6, when +available) are highly recommended. + +Included in this distribution are the most recent versions (as of +sept 2010) of the libz, libpng, libjpeg, and libtiff libraries. +These are not required, unless you need support for the PNG, JPEG, +or TIFF format. Note that you have to build these libraries to +support the named formats, even if your system already has shared +libraries for these formats. This is because the libraries here are +built such that they can be loaded as packages by the Tcl/Tk core, +making the handling of the various dependencies much easier. An +earlier version, 1.2.4, used a modified copy of Tcl's functions for +loading of shared libraries to load the support libraries at runtime. +These have been abandoned in favor of the new approach. + +BACKGROUND TO BUILDING + +The TkImg sources have been heavily refactored. Instead of building +one big package there are several small packages most of which are +independent of each other. + +All packages employ a TEA 2 based build system (configure/Make) for +easy configuration and building. This means that 99% of the options +to configure are the same for all the packages. + +All packages save for the supporting ones (see below) have names +starting with 'img'. For compatibility with older scripts the +package index file of the utility package 'img::base' declares +pseudo-packages 'img' and 'Img' which load all packages provided +by this extension. + +BUILDING - The convenient way + +The toplevel directory of tkImg contains a configure and Makefile for +convenient configuration and building of all packages in the +extension. + +Run this configure script in a build directory of your choice to +configure all packages, then run + + make all + make install + +in the build directory. The most important options for configure are +--prefix and --exec-prefix which tell the build system where to find +Tcl and Tk, and also where to install the results of the builds +(header, shared libraries, ...). + +This convenient build installs all shared libraries in a single +directory 'Img, together with a union package index for all +packages. + +If the builder requires only a subset of the packages he can use + + make all + +to build all packages, but must not use 'make install' in the top +build directory. Instead run + + make install + +in the sub directories of the build directory which contain the +requested packages, and their dependencies ! + +Note, that target install also builds the documentation based on +Tcl script dtplite. To build and install without documentation, use + + make install-libraries + +PACKAGES AND THEIR DEPENDENCIES + +This section is for people who want to bypass the master +configure/Makefile. + +At the bottom of the hierarchy of dependencies are the 'support +packages'. They encapsulate the support libraries for ZIP, TIFF, PNG +and JPEG in packages directly loadable by Tcl. They provide the +functionality of their underlying libraries via stub-tables. The names +of these packages are: + + Name Directory Dependency + ------------------------------------------------- + zlibtcl tkimg/compat/libz + pngtcl tkimg/compat/libpng zlibtcl + jpegtcl tkimg/compat/libjpeg + tifftcl tkimg/compat/libtiff + ------------------------------------------------- + +The package 'pngtcl' depends on 'zlibtcl' and has to be built after +it. Beyond that the order of building is free. Their TEA build systems +can be found in the directories listed above. + +The configure/Makefile's in the directories + + tkimg/compat/libz, tkimg/compat/libpng, tkimg/compat/libjpeg, tkimg/compat/libtiff + +must _not_ be used directly under any circumstances. + + +At the next level is the package 'tkimg'. It provides utility +functions used by all format handlers, and therefore has to be built +before any of them. Its TEA build system can be found in the directory + + Name Directory Dependency + ------------------------------------------------- + img::base tkimg/base + ------------------------------------------------- + +Beyond that are the packages providing the various format +handlers. They can be built in any order. Some of them depend on +supporting packages, as noted below. Their names and directories are + + Name Directory Dependency + ------------------------------------------------- + img::bmp tkimg/bmp + img::dted tkimg/dted + img::gif tkimg/gif + img::ico tkimg/ico + img::jpeg tkimg/jpeg jpegtcl + img::pcx tkimg/pcx + img::pixmap tkimg/pixmap + img::png tkimg/png pngtcl, zlibtcl + img::ppm tkimg/ppm + img::ps tkimg/ps + img::raw tkimg/raw + img::sgi tkimg/sgi + img::sun tkimg/sun + img::tga tkimg/tga + img::tiff tkimg/tiff tifftcl, zlibtcl, jpegtcl + img::window tkimg/window + img::xbm tkimg/xbm + img::xpm tkimg/xpm + ------------------------------------------------- + +CONFIGURE + +The source distributions have "configure", which has the following +possibilities: + configure ?options? + +Some possible options: + --prefix= Install headers in /include. + Default: "/usr/local" + --exec-prefix= Install libraries in /lib. + Default: "${prefix}" + --with-tcl= Find Tcl libraries in and include files in + /../include or /../generic. + Default: "${exec-prefix}/lib" or a sibling directory + of the Img build directory. + --with-tk= Find Tk libraries in and include files in + /../include or /../generic. + Default: the same values as given by --with-tcl + or a sibling directory of the Img build directory. + + Packages dependent on one or more of the support packages have + appropriate options to locate their libraries and headers, if + they cannot be found via --prefix and --exec-prefix + + Use configure --help to query each configure for the full set + of options available to it. + + +MAKE & INSTALL + + 'make', or 'make all' will build any package. + + 'make install' will install its headers and libraries in the + directories specified via --prefix/include and --exec-prefix/lib. + +USE + +If you want to use one or more of new image formats to be available in +your own scripts, add a line like the following somewhere in your +script: + + package require img::FORMAT + +where FORMAT stands for the name of the format requested. See the list +in section 'PACKAGES AND THEIR DEPENDENCIES' for the available +formats. Each format will automatically load all of the packages it is +dependent on. + +The line + package require Img + +is still legal and will load all format handlers provided by this +extension except dted and raw. + +As an example, have a look at the file "demo.tcl" + +For further options see the manpages. + + +DOCUMENTATION + +The documentation coming with the distribution is written in the +doctools format (see tcllib). + + NOTE: + The Img documentation makes use of features (include + files and variables) which are not part of an official + tcllib release yet. A cvs snapshot of tcllib is + required. + + + +PLATFORMS + tested: + Linux 2.0.30 (gcc, egcs) + IRIX 6.2 (cc, 32 bits only) + ULTRIX 4.1 (cc, gcc, egcs) + ULTRIX 4.4 (cc 3.0) + HP-UX-9 (cc, gcc, egcs) + HP-UX-10.2 (gcc, egcs) + SunOS-4.1.2 (cc) + Solaris 2.5 (gcc, egcs) + FreeBSD 2.2 (gcc, egcs) + Windows 95/98/NT(gcc-2.95/MS Visual C++ 4.2/5.0/6.0) + + Not done yet: + Mac ) someone interested + VMS ) to try?????? + + Other machines and OS's should work too. + +Feedback about other OS's and compilers is appreciated. Please +help me in making this package better. + +-- + Jan Nijtmans + email: nijtmans@users.sourceforge.net + url: http://purl.oclc.org/net/nijtmans/ + + Andreas Kupries, ActiveState Corp + email: andreas_kupries@users.sourceforge.net (private) + akupries@shaw.ca (private) + andreask@activestate.com (work) + url: http://www.purl.org/NET/akupries/ diff --git a/Reorganization.Notes.txt b/Reorganization.Notes.txt new file mode 100755 index 0000000..6b3b9e6 --- /dev/null +++ b/Reorganization.Notes.txt @@ -0,0 +1,283 @@ +TODO + Test suites + Documentation + Last: Removal of old sources and build system. + +===================================================================== +Proposal for a reorganization of the build system used by Img and its +supporting libraries. +===================================================================== + +Glossary +-------- + +Up front a small glossary of terms to avoid confusion later. + +[1] 'package library' (can be shortend to 'package'). + + A shared library having all the special code (xx_Init, + xx_SafeInit) to allow the tcl core to load it as a Tcl + package. + + Examples: [incr Tcl], [Trf], ... + +[2] 'support library' + + A shared library which can not be loaded as a Tcl package. + + Examples: libz, libjpeg, libpng, ... + +Intro +----- + +I propose to slash the existing source code into a number of separate +packages. I do _not_ propose to place each of these new packages into +a separate source tree. The files stay in the existing tree, and this +tree is augmented with additional directories containing the files +relevant to configuring and building the new packages. Essentially +configure.in and Makefile.in. All build systems will be based upon the +TEA 2 system introduced in the sampleextension (See Tcl SF project). + +Note: I created the new build systems for TclXML/DOM/XSLT and their +various subpackages (expat, libxml2, ...) in this way, with success +IMHO :) + +There will be one package containing the common utilities and one +package per image format, and support library [*]. The old name of the +package, Img, will be used to define a 'super'-package which loads all +of the existing functionality into the interpreter when required. This +maintains compatibility with existing scripts. + +From the points of view of scripts there will be _no_ change in the +perceived functionality. It should however be easier to write +additional image format handlers using the framework provided by Img. + +[*] As for why one package per support library see the next section. + + +Handling of the support libraries coming with Img +(and of support libraries) in general. +----------------------------------------------------- + +Available options, discussion +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +(1) Create the support libraries as part of the package for the + format requiring them. This is essentially a static linkage. + + This one of the easiest ways to build a support library. + + It also implies that the functionality a support library used + in multiple format handlers is loaded multiple times. To me + this a severe disadvantage. + +(2) Create the support libraries independent of the using + packages, as shared libraries + + (a) Link support at compile time into the packages. + + (1) Via -library. In other words implicit usage of + the shared library loader provided by the OS. + + Still relatively easy to do, although it + requires more care to portably generate shared + libraries. Libries used multiple times are + loaded only once. + + Also requires a lot of additional support code + if the library a supporting library is linked + to is stored in and loaded from a non-native + filesystem. In other words when used in wrapped + application and such. The support code has to + copy the support libraries to the same place + in the native FS the using library is copied + to, _before_ the using library is loaded, so + that the support libraries are available to + the dyn.loader provided by the OS. + + + (2) Via direct usage of the objects. In other + words static linkage. This is the same as (1). + + + (b) Link support at runtime. + + (1) Via explicit usage of the shared library + loader provided by the OS. + + Generation of the support library is like for + (2a1). Loading however is done by explicitly + invoking the shared library loader of the + OS. This allows the Tcl library to perform the + necessary copying should the support library + reside in a non-native filesystem. + + As the support library does not follow the + convention of a tcl package (per definitionem) + the standard load functionality of Tcl cannot + be used to load the library. This means that + + (a) either the load functionality in Tcl + is refactored into + + - portable low-level loading of + any shared library + + - and high-level layer for + handling loaded shared + libraries which are tcl + packages. + + (b) or the 'img' package has to carry the + source code implementing the portable + loading of shared libraries. + + Option (b) I consider rather unpleasant as it + leads to the duplication of functionality in + all high-level packages requiring the loading + support libraries. Trf and TrfCrypt for + example have need of this functionality too. + + + (2) Wrap support library into thin package + exporting its functionality via a + stub-table. In other words, turn the support + library into a package library. + + + In contrast to (2b1) the support library is + not created as simple shared library, but with + all the necessary additional code to cause tcl + to recognize it as true package. + + A stub table is used to provide the + functionality of the support library to other + packages. + + This option could also be seen as (2b1c). It + makes the library available in a simple manner + with the need to refactor the load + functionality provided by the Tcl core. It + allows us to drive the reoganization of Img + independent of the Tcl core, making do with + the existing functionality. It also + essentially removes the impetus to actually + implement (2b1a). The good (enough) is the + enemy of the best. + +Conclusion +~~~~~~~~~~ + +I have chosen option (2b2) for the support libraries. My reasons for +doing so are this: + +* The state of the implementation of (2b1/1) is unclear. It + requires a TIP, and no movement is seen on that front. + + The chosen option has no dependency on this vaporous + functionality. + +* The chosen option allows us to use TEA 2 based build systems + for the support libraries themselves. They are easier to create + and later maintain, at least I perceive them so, due to the + larger number of existing TEA 2 based package I can draw upon + as templates for the new packages. + +* Note that the chosen option does not prevent static linking of + the support libraries. Currently Img uses special code to + setup the function tables with static information when linking + Img statically. These function tables are essentially stub + tables. This means that the explicit usage of stub tables for + the support libraries makes this mode easier to handle too, as + no special code is required anymore. + +* Note that the actually created package is also able use + -library to dynamically link to the actual support library. In + this mode it can make use of pre-installed libraries. In this + way we get a mixture of (2b2) and (2a1). + + +Files, and their organization into packages +------------------------------------------- + + | Package | Stubtable | Files | Notes + -+---------------+---------------+----------------+------------------------ +Ok | tkimg | Yes | img.h | Base package. Common +Ok | | | imgInt.h | utilities helping in +Ok | | | imgInit.c | the implementation of +Ok | | | imgObj.c | image handlers. +Ok | | | imgUtil.c | + -+---------------+---------------+----------------+------------------------ +Ok | tkimg::bmp | | imgBMP.c | BMP format +Ok | tkimg::gif | | imgGIF.c | GIF format +Ok | tkimg::window | | imgWindow.c | windows +Ok | tkimg::xbm | | imgXBM.c | XBM format. +Ok | tkimg::xpm | | imgXPM.c | XPM format. +Ok | tkimg::ps | | imgPS.c | PostScript + PDF format +Ok | tkimg::jpeg | | imgJPEG.c | JPEG format +Ok | tkimg::png | | imgPNG.c | PNG format +Ok | tkimg::pcx | | | PCX format (Paintbrush) +Ok | tkimg::sgi | | | SGI format (SGI native) +Ok | tkimg::sun | | | SUN format (Sun raster) +Ok | tkimg::tga | | | TGA format (Truevision Targa) + -+---------------+---------------+----------------+------------------------ +Ok | tkimg::tiff | | imgTIFF.c | TIFF format +Ok | | | imgTIFFjpeg.c | Various additional +Ok | | | imgTIFFpixar.c | codecs. +Ok | | | imgTIFFzip.c | + -+---------------+---------------+----------------+------------------------ +Ok | tkimg::pixmap | | imgPmap.h | pixmap format +Ok | | | imgPmap.c | pixmap ? (PPM, XPM ?) +Ok | | | imgUnixPmap.c | +Ok | | | imgWinPmap.c | + -+---------------+---------------+----------------+------------------------ +Ok | Img | | -- | Super package loading +Ok | | | | all of the above. + -+---------------+---------------+----------------+------------------------ +Ok | jpegtcl | Yes | libjpeg/ | jpeg support library +Ok | pngtcl | Yes | libpng/ | png support library +Ok | zlibtcl | Yes | libz/ | zip support library +Ok | tifftcl | Yes | libtiff/ | tiff support library + -+---------------+---------------+----------------+------------------------ + +None of the '*Support' packages provides tcl level commands. They only +provide their own functionality, through stubtables. Note that the png +support library depends on libz, and thus has to require this package. + + + +Misc. notes +----------- + +* The zip support library (zlib, libz) is also used by + + - tkHTML, + - JCW's 'zipper' package, + - zipvfs + - mk4vfs + - and Trf. + + Placement of the ZlibSupport package with Img for the time + being is no problem and easy for tkHTML, as that package often + may want to use Img for the handling of additional image + formats in web pages. It is more of an issue when considering + zipper and Trf as there is more disconnect between them and + Img. + + In the future we should move ZlibSupport into its own project, + or module in a project. Maybe directly into the source base of + zlib itself ? + + The same can be considered for the PNG support. + + Regarding JPEG the maintainership of the library much more + vague. In other words I don't know how to talk to for this. + + +* Regarding the code of img itself. Are the functions in + 'imgObj' still necessary ? Especially ByteArray seems to + be a duplication of functionality provided by the Tcl core. + + +* Future: Reflect handler functionality into the Tcl level, + allow creation of format handlers in Tcl. diff --git a/aclocal.m4 b/aclocal.m4 new file mode 100755 index 0000000..43d372b --- /dev/null +++ b/aclocal.m4 @@ -0,0 +1,6 @@ +# +# Include the TEA standard macro set +# + +builtin(include,tclconfig/tcl.m4) +builtin(include,tclconfig/img.m4) diff --git a/base/ChangeLog b/base/ChangeLog new file mode 100755 index 0000000..d461b44 --- /dev/null +++ b/base/ChangeLog @@ -0,0 +1,66 @@ +2010-04-09 Jan Nijtmans + + * Make all of Tk's stub table entries available to tkImg, + no matter what Tk version we are compiling against. + +2008-11-14 Andreas Kupries + + * tkImgUtils.c: Fixed syntax error reported by MSVC. + +2006-01-27 Andreas Kupries + + * configure.in: TEA 3.5 upgrade, do not use TK_LIBS (anymore). + * configure: Regenerated. + +2004-12-01 Jeff Hobbs + + * tkimg.h: use TK_PHOTO_COMPOSITE_SET instead of + TK_PHOTO_COMPOSITE_OVERLAY to ensure initial alpha is taken + directly from source image (without compositing). [Bug 987107] + +2004-08-18 Andreas Kupries + + * + * Released and tagged Tkimg 1.3 ======================== + * + +2002-11-26 Andreas Kupries + + * pkgIndex.tcl.in: Added index script to load all format handlers + when requiring 'Img', i.e. the old package. + +2002-11-21 Andreas Kupries + + * tkimgUtils.c (tkimg_FixObjMatchProc): + * tkimgUtils.c (tkimg_FixChanMatchProc): Changed bit-negation to + logical negation. This fixes a bug intriduced by the rewrite to + use version info to distinguish between calls from 8.3.2 and + 8.3. The bug caused the procedure to bail out without rotating + the arguments, causing the remainder to end up with the argument + in the wrong places, crashing the system when trying to read + from the channel or data object. + + Looking at the signatures I believe that the inherited code is + still wrong for calls from 8.3.2. + +2002-11-20 Andreas Kupries + + * Makefile.in: The configure variable TK_XINCLUDES has to placed + in variable, to avoid problem on platforms placing a shell + comment into it. More in the Makefile. + +2002-11-19 Andreas Kupries + + * tkimg.h (tkimg_PhotoPutBlockTk): Added a convenience macro + dealing with the change of the signature of Tk_PhotoPutBlock + between 8.3.5 and 8.4 [see TIP 98]. This is a compile time + decision. I.e. 'tkimg' and format handlers can be compiled for + 8.3 and earlier, or 8.4. The result will run only with the core + it was compiled for. This might change before the release of Img + 2.0. + +2002-11-18 Andreas Kupries + + * Start of logging. + + * tkimg: The base package for the format handlers to draw upon. diff --git a/base/Makefile.in b/base/Makefile.in new file mode 100755 index 0000000..2fb1548 --- /dev/null +++ b/base/Makefile.in @@ -0,0 +1,508 @@ +# Makefile.in -- +# +# This file is a Makefile for tkimg TEA Extension. If it has the name +# "Makefile.in" then it is a template for a Makefile; to generate the +# actual Makefile, run "./configure", which is a configuration script +# generated by the "autoconf" program (constructs like "@foo@" will get +# replaced in the actual Makefile. +# +# Copyright (c) 1999 Scriptics Corporation. +# Copyright (c) 2002-2005 ActiveState Corporation. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# RCS: @(#) $Id: Makefile.in 367 2013-11-19 12:32:34Z nijtmans $ + +#======================================================================== +# Add additional lines to handle any additional AC_SUBST cases that +# have been added in a customized configure script. +#======================================================================== + +PACKAGE_TCLNAME = @PACKAGE_TCLNAME@ + +#======================================================================== +# Nothing of the variables below this line should need to be changed. +# Please check the TARGETS section below to make sure the make targets +# are correct. +#======================================================================== + +#======================================================================== +# The names of the source files is defined in the configure script. +# The object files are used for linking into the final library. +# This will be used when a dist target is added to the Makefile. +# It is not important to specify the directory, as long as it is the +# $(srcdir) or in the generic, win or unix subdirectory. +#======================================================================== + +PKG_SOURCES = @PKG_SOURCES@ +PKG_OBJECTS = @PKG_OBJECTS@ + +PKG_STUB_SOURCES = @PKG_STUB_SOURCES@ +PKG_STUB_OBJECTS = @PKG_STUB_OBJECTS@ + +#======================================================================== +# PKG_TCL_SOURCES identifies Tcl runtime files that are associated with +# this package that need to be installed, if any. +#======================================================================== + +PKG_TCL_SOURCES = @PKG_TCL_SOURCES@ + +#======================================================================== +# This is a list of public header files to be installed, if any. +#======================================================================== + +PKG_HEADERS = @PKG_HEADERS@ + +#======================================================================== +# "PKG_LIB_FILE" refers to the library (dynamic or static as per +# configuration options) composed of the named objects. +#======================================================================== + +PKG_LIB_FILE = @PKG_LIB_FILE@ +PKG_STUB_LIB_FILE = @PKG_STUB_LIB_FILE@ + +lib_BINARIES = $(PKG_LIB_FILE) $(PKG_STUB_LIB_FILE) +BINARIES = $(lib_BINARIES) + +SHELL = @SHELL@ + +srcdir = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +libdir = @libdir@ +includedir = @includedir@ +datarootdir = @datarootdir@ +datadir = @datadir@ +mandir = @mandir@ + +DESTDIR = + +PKG_DIR = $(PACKAGE_NAME)$(PACKAGE_VERSION) +pkgdatadir = $(datadir)/$(PKG_DIR) +pkglibdir = $(libdir)/$(PKG_DIR) +pkgincludedir = $(includedir)/$(PKG_DIR) + +top_builddir = . + +INSTALL_OPTIONS = +INSTALL = $(SHELL) $(srcdir)/../tclconfig/install-sh -c ${INSTALL_OPTIONS} +INSTALL_DATA_DIR = ${INSTALL} -d -m 755 +INSTALL_PROGRAM = ${INSTALL} -m 755 +INSTALL_DATA = ${INSTALL} -m 644 +INSTALL_SCRIPT = ${INSTALL_PROGRAM} +INSTALL_LIBRARY = ${INSTALL_DATA} + +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +CC = @CC@ +CFLAGS_DEFAULT = @CFLAGS_DEFAULT@ +CFLAGS_WARNING = @CFLAGS_WARNING@ +CLEANFILES = @CLEANFILES@ +EXEEXT = @EXEEXT@ +LDFLAGS_DEFAULT = @LDFLAGS_DEFAULT@ +MAKE_LIB = @MAKE_LIB@ +MAKE_SHARED_LIB = @MAKE_SHARED_LIB@ +MAKE_STATIC_LIB = @MAKE_STATIC_LIB@ +MAKE_STUB_LIB = @MAKE_STUB_LIB@ +OBJEXT = @OBJEXT@ +RANLIB = @RANLIB@ +RANLIB_STUB = @RANLIB_STUB@ +SHLIB_CFLAGS = @SHLIB_CFLAGS@ +SHLIB_LD = @SHLIB_LD@ +SHLIB_LD_FLAGS = @SHLIB_LD_FLAGS@ +SHLIB_LD_LIBS = @SHLIB_LD_LIBS@ +STLIB_LD = @STLIB_LD@ +TCL_BIN_DIR = @TCL_BIN_DIR@ +TCL_DEFS = @TCL_DEFS@ +TCL_SRC_DIR = @TCL_SRC_DIR@ +TK_BIN_DIR = @TK_BIN_DIR@ +TK_SRC_DIR = @TK_SRC_DIR@ + +# This is necessary for packages that use private Tcl headers +TCL_TOP_DIR_NATIVE = @TCL_TOP_DIR_NATIVE@ + +# Not used, but retained for reference of what libs Tcl required +TCL_LIBS = @TCL_LIBS@ +TK_LIBS = @TK_LIBS@ + +#======================================================================== +# TCLLIBPATH seeds the auto_path in Tcl's init.tcl so we can test our +# package without installing. The other environment variables allow us +# to test against an uninstalled Tcl. Add special env vars that you +# require for testing here (like TCLX_LIBRARY). +#======================================================================== + +EXTRA_PATH = $(top_builddir):$(TCL_BIN_DIR):$(TK_BIN_DIR) +TCLSH_ENV = TCL_LIBRARY=`@CYGPATH@ $(TCL_SRC_DIR)/library` \ + TK_LIBRARY=`@CYGPATH@ $(TK_SRC_DIR)/library` \ + @LD_LIBRARY_PATH_VAR@="$(EXTRA_PATH):$(@LD_LIBRARY_PATH_VAR@)" \ + PATH="$(EXTRA_PATH):$(PATH)" \ + TCLLIBPATH="$(top_builddir)" +TCLSH_PROG = @TCLSH_PROG@ +WISH_PROG = @WISH_PROG@ +TCLSH = $(TCLSH_ENV) $(TCLSH_PROG) +WISH = $(TCLSH_ENV) $(WISH_PROG) +SHARED_BUILD = @SHARED_BUILD@ + +# The local includes must come first, because the TK_XINCLUDES can be +# just a comment + +INCLUDES = @PKG_INCLUDES@ \ + @TK_INCLUDES@ @TCL_INCLUDES@ @TK_XINCLUDES@ + +PKG_CFLAGS = @PKG_CFLAGS@ + +# TCL_DEFS is not strictly need here, but if you remove it, then you +# must make sure that configure.in checks for the necessary components +# that your library may use. TCL_DEFS can actually be a problem if +# you do not compile with a similar machine setup as the Tcl core was +# compiled with. +#DEFS = $(TCL_DEFS) @DEFS@ $(PKG_CFLAGS) +DEFS = @DEFS@ $(PKG_CFLAGS) + +CONFIG_CLEAN_FILES = Makefile + +CPPFLAGS = @CPPFLAGS@ -DPACKAGE_TCLNAME=\"$(PACKAGE_TCLNAME)\" +LIBS = @PKG_LIBS@ @LIBS@ +AR = @AR@ +CFLAGS = @CFLAGS@ -DTKIMGAPI=MODULE_SCOPE +COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) + +.SUFFIXES: .c .$(OBJEXT) + +#======================================================================== +# Start of user-definable TARGETS section +#======================================================================== + +#======================================================================== +# TEA TARGETS. Please note that the "libraries:" target refers to platform +# independent files, and the "binaries:" target inclues executable programs and +# platform-dependent libraries. Modify these targets so that they install +# the various pieces of your package. The make and install rules +# for the BINARIES that you specified above have already been done. +#======================================================================== + +all: binaries libraries doc + +#======================================================================== +# The binaries target builds executable programs, Windows .dll's, unix +# shared/static libraries, and any other platform-dependent files. +# The list of targets to build for "binaries:" is specified at the top +# of the Makefile, in the "BINARIES" variable. +#======================================================================== + +binaries: $(BINARIES) + +libraries: + +doc: + +# Currently no documentation to create, the HTML is part of the +# distribution. +# ................................................................. +# @echo "If you have documentation to create, place the commands to" +# @echo "build the docs in the 'doc:' target. For example:" +# @echo " xml2nroff sample.xml > sample.n" +# @echo " xml2html sample.xml > sample.html" + +install: all install-binaries install-libraries install-doc + +install-binaries: binaries install-lib-binaries install-bin-binaries + +#======================================================================== +# This rule installs platform-independent files, such as header files. +#======================================================================== + +install-libraries: libraries + @$(INSTALL_DATA_DIR) $(DESTDIR)$(includedir) + @echo "Installing header files in $(DESTDIR)$(includedir)" + @list='$(PKG_HEADERS)'; for i in $$list; do \ + echo "Installing $(srcdir)/$$i" ; \ + $(INSTALL_DATA) $(srcdir)/$$i $(DESTDIR)$(includedir) ; \ + done; + +#======================================================================== +# Install documentation. Unix manpages should go in the $(mandir) +# directory. +#======================================================================== + +install-doc: doc + +# @$(INSTALL_DATA_DIR) $(DESTDIR)$(mandir)/mann +# @echo "Installing documentation in $(DESTDIR)$(mandir)" +# @for i in doc/*.n; do \ +# echo "Installing $$i"; \ +# rm -f $(DESTDIR)$(mandir)/mann/`basename $$i`; \ +# $(INSTALL_DATA) $$i $(DESTDIR)$(mandir)/mann ; \ +# done + +test: binaries libraries + $(WISH) `@CYGPATH@ $(srcdir)/tests/all.tcl` $(TESTFLAGS) + +shell: binaries libraries + @$(TCLSH) $(SCRIPT) + +gdb: + $(TCLSH_ENV) gdb $(TCLSH_PROG) $(SCRIPT) + +depend: + +#======================================================================== +# $(PKG_LIB_FILE) should be listed as part of the BINARIES variable +# mentioned above. That will ensure that this target is built when you +# run "make binaries". +# +# The $(PKG_OBJECTS) objects are created and linked into the final +# library. In most cases these object files will correspond to the +# source files above. +#======================================================================== + +$(PKG_LIB_FILE): $(PKG_OBJECTS) + -rm -f $(PKG_LIB_FILE) + ${MAKE_LIB} + $(RANLIB) $(PKG_LIB_FILE) + +$(PKG_STUB_LIB_FILE): $(PKG_STUB_OBJECTS) + -rm -f $(PKG_STUB_LIB_FILE) + ${MAKE_STUB_LIB} + $(RANLIB_STUB) $(PKG_STUB_LIB_FILE) + +#======================================================================== +# We need to enumerate the list of .c to .o lines here. +# +# In the following lines, $(srcdir) refers to the toplevel directory +# containing your extension. If your sources are in a subdirectory, +# you will have to modify the paths to reflect this: +# +# tkimg.$(OBJEXT): $(srcdir)/generic/tkimg.c +# $(COMPILE) -c `@CYGPATH@ $(srcdir)/generic/tkimg.c` -o $@ +# +# Setting the VPATH variable to a list of paths will cause the makefile +# to look into these paths when resolving .c to .obj dependencies. +# As necessary, add $(srcdir):$(srcdir)/compat:.... +#======================================================================== + +VPATH = $(srcdir):$(srcdir)/generic:$(srcdir)/unix:$(srcdir)/win + +.c.@OBJEXT@: + $(COMPILE) -c `@CYGPATH@ $<` -o $@ + +#======================================================================== +# Create the pkgIndex.tcl file. +# It is usually easiest to let Tcl do this for you with pkg_mkIndex, but +# you may find that you need to customize the package. If so, either +# modify the -hand version, or create a pkgIndex.tcl.in file and have +# the configure script output the pkgIndex.tcl by editing configure.in. +#======================================================================== + +pkgIndex.tcl: + ( echo pkg_mkIndex . $(PKG_LIB_FILE) \; exit; ) | $(TCLSH) + +pkgIndex.tcl-hand: + (echo 'package ifneeded $(PACKAGE_TCLNAME) $(PACKAGE_VERSION) \ + [list load [file join $$dir $(PKG_LIB_FILE)]]'\ + ) > pkgIndex.tcl + +#======================================================================== +# Distribution creation +# You may need to tweak this target to make it work correctly. +#======================================================================== + +#COMPRESS = tar cvf $(PKG_DIR).tar $(PKG_DIR); compress $(PKG_DIR).tar +COMPRESS = gtar zcvf $(PKG_DIR).tar.gz $(PKG_DIR) +DIST_ROOT = /tmp/dist +DIST_DIR = $(DIST_ROOT)/$(PKG_DIR) + +dist-clean: + rm -rf $(DIST_DIR) $(DIST_ROOT)/$(PKG_DIR).tar.* + +dist: dist-clean doc + mkdir -p $(DIST_DIR) + cp -p $(srcdir)/ChangeLog $(srcdir)/README* $(srcdir)/doc/license* \ + $(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/*.in \ + $(DIST_DIR)/ + chmod 664 $(DIST_DIR)/Makefile.in $(DIST_DIR)/aclocal.m4 + chmod 775 $(DIST_DIR)/configure $(DIST_DIR)/configure.in + + mkdir $(DIST_DIR)/tclconfig + cp $(srcdir)/tclconfig/install-sh $(srcdir)/tclconfig/tcl.m4 \ + $(DIST_DIR)/tclconfig/ + chmod 664 $(DIST_DIR)/tclconfig/tcl.m4 + chmod +x $(DIST_DIR)/tclconfig/install-sh + + -list='htdocs/art demos generic library mac tests unix win tea.tests tools tools/rules'; \ + for p in $$list; do \ + if test -d $(srcdir)/$$p ; then \ + mkdir -p $(DIST_DIR)/$$p; \ + cp -p $(srcdir)/$$p/*.* $(srcdir)/$$p/* $(DIST_DIR)/$$p/; \ + fi; \ + done + + -list='doc'; \ + for p in $$list; do \ + if test -d $$p ; then \ + mkdir -p $(DIST_DIR)/$$p; \ + cp -p $$p/*.* $$p/* $(DIST_DIR)/$$p/; \ + fi; \ + done + -mv $(DIST_DIR)/htdocs/art $(DIST_DIR)/doc/art + rm -rf $(DIST_DIR)/htdocs + + (cd $(DIST_ROOT); $(COMPRESS);) + +dist_orig: + rm -rf $(PKG_DIR)* + ls -d $(srcdir)/* > __FILES + mkdir $(PKG_DIR) + cp -rf `cat __FILES | grep -v __FILES` $(PKG_DIR) + rm __FILES + find $(PKG_DIR) -name CVS -prune -exec rm -rf {} \; + cd $(PKG_DIR) ; $(TCLSH_PROG) PREPARE + -tar cf - $(PKG_DIR) | gzip --best > $(PKG_DIR).tar.gz + -tar cf - $(PKG_DIR) | bzip2 > $(PKG_DIR).tar.bz2 + -zip -r $(PKG_DIR).zip $(PKG_DIR) + rm -rf $(PKG_DIR) + +#======================================================================== +# End of user-definable section +#======================================================================== + +#======================================================================== +# Don't modify the file to clean here. Instead, set the "CLEANFILES" +# variable in configure.in +#======================================================================== + +clean: + -test -z "$(BINARIES)" || rm -f $(BINARIES) + -rm -f *.$(OBJEXT) core *.core + -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) + +distclean: clean + -rm -f *.tab.c + -rm -f $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log config.status + +#======================================================================== +# Install binary object libraries. On Windows this includes both .dll and +# .lib files. Because the .lib files are not explicitly listed anywhere, +# we need to deduce their existence from the .dll file of the same name. +# Library files go into the lib directory. +# In addition, this will generate the pkgIndex.tcl +# file in the install location (assuming it can find a usable tclsh shell) +# +# You should not have to modify this target. +#======================================================================== + +install-lib-binaries: + @$(INSTALL_DATA_DIR) $(DESTDIR)$(pkglibdir) + @list='$(lib_BINARIES)'; for p in $$list; do \ + if test -f $$p; then \ + echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p"; \ + $(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p; \ + stub=`echo $$p|sed -e "s/.*\(stub\).*/\1/"`; \ + if test "x$$stub" = "xstub"; then \ + echo " $(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p"; \ + $(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p; \ + else \ + echo " $(RANLIB) $(DESTDIR)$(pkglibdir)/$$p"; \ + $(RANLIB) $(DESTDIR)$(pkglibdir)/$$p; \ + fi; \ + ext=`echo $$p|sed -e "s/.*\.//"`; \ + if test "x$$ext" = "xdll"; then \ + lib=`basename $$p|sed -e 's/.[^.]*$$//'`.lib; \ + if test -f $$lib; then \ + echo " $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib"; \ + $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib; \ + fi; \ + fi; \ + fi; \ + done + @list='$(PKG_TCL_SOURCES)'; for p in $$list; do \ + if test -f $(srcdir)/$$p; then \ + destp=`basename $$p`; \ + echo " Install $$destp $(DESTDIR)$(pkglibdir)/$$destp"; \ + $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkglibdir)/$$destp; \ + fi; \ + done + @if test "x$(SHARED_BUILD)" = "x1"; then \ + echo " Install pkgIndex.tcl $(DESTDIR)$(pkglibdir)"; \ + $(INSTALL_DATA) pkgIndex.tcl $(DESTDIR)$(pkglibdir); \ + fi + $(INSTALL_DATA) tkimgConfig.sh $(DESTDIR)$(libdir) + +#======================================================================== +# Install binary executables (e.g. .exe files and dependent .dll files) +# This is for files that must go in the bin directory (located next to +# wish and tclsh), like dependent .dll files on Windows. +# +# You should not have to modify this target, except to define bin_BINARIES +# above if necessary. +#======================================================================== + +install-bin-binaries: + @$(INSTALL_DATA_DIR) $(DESTDIR)$(bindir) + @list='$(bin_BINARIES)'; for p in $$list; do \ + if test -f $$p; then \ + echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p"; \ + $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p; \ + fi; \ + done + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status + +uninstall-binaries: + list='$(lib_BINARIES)'; for p in $$list; do \ + rm -f $(DESTDIR)$(pkglibdir)/$$p; \ + done + list='$(PKG_TCL_SOURCES)'; for p in $$list; do \ + p=`basename $$p`; \ + rm -f $(DESTDIR)$(pkglibdir)/$$p; \ + done + list='$(bin_BINARIES)'; for p in $$list; do \ + rm -f $(DESTDIR)$(bindir)/$$p; \ + done + +#======================================================================== +# +# Target to regenerate header files and stub files from the *.decls tables. +# +#======================================================================== + +genstubs: + $(TCLSH_PROG) \ + $(srcdir)/../tools/genStubs.tcl $(srcdir) \ + $(srcdir)/tkimg.decls + +#======================================================================== +# +# Target to check that all exported functions have an entry in the stubs +# tables. +# +#======================================================================== + +tkimg_DECLS = \ + $(srcdir)/tkimg.decls + +checkstubs: + -@for i in `nm -p $(tkimg_LIB_FILE) | awk '$$2 ~ /T/ { print $$3 }' \ + | sort -n`; do \ + match=0; \ + for j in $(tkimg_DECLS); do \ + if [ `grep -c $$i $$j` -gt 0 ]; then \ + match=1; \ + fi; \ + done; \ + if [ $$match -eq 0 ]; then echo $$i; fi \ + done + + +.PHONY: all binaries clean depend distclean doc install libraries test + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/base/README b/base/README new file mode 100755 index 0000000..b3ff466 --- /dev/null +++ b/base/README @@ -0,0 +1,68 @@ + +tkimg_Fix*Proc's + +Signature of photo image type functions + + + Tk 8.3.2 or earlier Tk 8.3 or later +============================================================================== +Tk_ImageStringWriteProc int int + ------------------------------------------------------ + Tcl_Interp *interp, Tcl_Interp *interp, + Tcl_DString *dataPtr, Tcl_Obj *format, + char *formatString, Tk_PhotoImageBlock *blockPtr + Tk_PhotoImageBlock *blockPtr +============================================================================== +Tk_ImageFileMatchProc int int + ------------------------------------------------------ + Tcl_Channel chan, Tcl_Channel chan, + char *fileName, CONST char *fileName, + char *formatString, Tcl_Obj *format, + int *widthPtr, int *widthPtr, + int *heightPtr int *heightPtr, + Tcl_Interp *interp +============================================================================== +Tk_ImageStringMatchProc int int + ------------------------------------------------------ + char *string, Tcl_Obj *dataObj, + char *formatString, Tcl_Obj *format, + int *widthPtr, int *widthPtr, + int *heightPtr int *heightPtr, + Tcl_Interp *interp +============================================================================== + +Different number of arguments, with different types, and the arguments +are permuted. + +A Tk 8.3 core takes special steps so that a specially written photo +image can distinguish between the two possible types of calls using +the arguments alone. + +It always calls the function with the maximal number of arguments +possible, padding with NULLs if the 8.3 signature has not enough +arguments. See 'Tk_ImageStringWriteProc' (tkImgPhoto.c, line 962). + +In the case of the other two procedures the photo image type can check +the integrity of the last argument to distinguish between the two +cores. When called from an 8.3.2 or earlier core the last argument +will be bogus (random data). + +This is actually the method used by Img 1.2.4. It checks that +interp->result == interp->resultSpace. There are two problems with +that approach: + +(1) The pointer stored in 'interp' is random, and might not be + dereferencable. In other words, a segementation fault can + happen. Just assume 'interp == NULL' for example. + +(2) It requires access to private definitions of the core + (Definition of 'struct Interp'). + +Because this Img 2.0 will use a different approach. When loaded into +the system it will ask for the current version of Tk, and modify its +behaviour accordingly. + + + tkimg_FixChanMatchProc (interp, chan, file, format, width, height) + tkimg_FixObjMatchProc (interp, data, format, width, height) + tkimg_FixStringWriteProc(data, interp, dataPtr, format, blockPtr) diff --git a/base/aclocal.m4 b/base/aclocal.m4 new file mode 100755 index 0000000..e66e79d --- /dev/null +++ b/base/aclocal.m4 @@ -0,0 +1,10 @@ +# +# Include the TEA standard macro set +# + +builtin(include,../tclconfig/tcl.m4) +builtin(include,../tclconfig/img.m4) + +# +# Add here whatever m4 macros you want to define for your package +# diff --git a/base/configure b/base/configure new file mode 100755 index 0000000..26788a7 --- /dev/null +++ b/base/configure @@ -0,0 +1,12774 @@ +#! /bin/sh +# From configure.in Id: configure.in 373 2014-12-27 21:28:34Z obermeier . +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.59 for tkimg 1.4.6. +# +# Copyright (C) 2003 Free Software Foundation, Inc. +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then + set -o posix +fi +DUALCASE=1; export DUALCASE # for MKS sh + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)$' \| \ + . : '\(.\)' 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } + /^X\/\(\/\/\)$/{ s//\1/; q; } + /^X\/\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + + +# PATH needs CR, and LINENO needs CR and PATH. +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done + + ;; + esac + # We did not find ourselves, most probably we were run as `sh COMMAND' + # in which case we are not to be found in the path. + if test "x$as_myself" = x; then + as_myself=$0 + fi + if test ! -f "$as_myself"; then + { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 + { (exit 1); exit 1; }; } + fi + case $CONFIG_SHELL in + '') + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for as_base in sh bash ksh sh5; do + case $as_dir in + /*) + if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } + CONFIG_SHELL=$as_dir/$as_base + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" ${1+"$@"} + fi;; + esac + done +done +;; + esac + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line before each line; the second 'sed' does the real + # work. The second script uses 'N' to pair each line-number line + # with the numbered line, and appends trailing '-' during + # substitution so that $LINENO is not a special case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) + sed '=' <$as_myself | + sed ' + N + s,$,-, + : loop + s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + t loop + s,-$,, + s,^['$as_cr_digits']*\n,, + ' >$as_me.lineno && + chmod +x $as_me.lineno || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensible to this). + . ./$as_me.lineno + # Exit status is that of the last command. + exit +} + + +case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' +' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +esac + +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + # We could just check for DJGPP; but this test a) works b) is more generic + # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). + if test -f conf$$.exe; then + # Don't use ln at all; we don't have any links + as_ln_s='cp -p' + else + as_ln_s='ln -s' + fi +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.file + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_executable_p="test -f" + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +# IFS +# We need space, tab and new line, in precisely that order. +as_nl=' +' +IFS=" $as_nl" + +# CDPATH. +$as_unset CDPATH + + +# Name of the host. +# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +exec 6>&1 + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_config_libobj_dir=. +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} + +# Maximum number of lines to put in a shell here document. +# This variable seems obsolete. It should probably be removed, and +# only ac_max_sed_lines should be used. +: ${ac_max_here_lines=38} + +# Identity of this package. +PACKAGE_NAME='tkimg' +PACKAGE_TARNAME='tkimg' +PACKAGE_VERSION='1.4.6' +PACKAGE_STRING='tkimg 1.4.6' +PACKAGE_BUGREPORT='' + +# Factoring default headers for most tests. +ac_includes_default="\ +#include +#if HAVE_SYS_TYPES_H +# include +#endif +#if HAVE_SYS_STAT_H +# include +#endif +#if STDC_HEADERS +# include +# include +#else +# if HAVE_STDLIB_H +# include +# endif +#endif +#if HAVE_STRING_H +# if !STDC_HEADERS && HAVE_MEMORY_H +# include +# endif +# include +#endif +#if HAVE_STRINGS_H +# include +#endif +#if HAVE_INTTYPES_H +# include +#else +# if HAVE_STDINT_H +# include +# endif +#endif +#if HAVE_UNISTD_H +# include +#endif" + +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS CYGPATH EXEEXT PKG_LIB_FILE PKG_STUB_LIB_FILE PKG_STUB_SOURCES PKG_STUB_OBJECTS PKG_TCL_SOURCES PKG_HEADERS PKG_INCLUDES PKG_LIBS PKG_CFLAGS PACKAGE_TCLNAME TCL_VERSION TCL_PATCH_LEVEL TCL_BIN_DIR TCL_SRC_DIR TCL_LIB_FILE TCL_LIB_FLAG TCL_LIB_SPEC TCL_STUB_LIB_FILE TCL_STUB_LIB_FLAG TCL_STUB_LIB_SPEC CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC OBJEXT CLEANFILES TCL_LIBS TCL_DEFS TCL_EXTRA_CFLAGS TCL_LD_FLAGS TCL_SHLIB_LD_LIBS TK_VERSION TK_BIN_DIR TK_SRC_DIR TK_LIB_FILE TK_LIB_FLAG TK_LIB_SPEC TK_STUB_LIB_FILE TK_STUB_LIB_FLAG TK_STUB_LIB_SPEC TK_LIBS TK_XINCLUDES CPP INSTALL INSTALL_DATA_DIR INSTALL_DATA INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_LIBRARY SET_MAKE RANLIB ac_ct_RANLIB EGREP MATH_LIBS PKG_SOURCES PKG_OBJECTS TCL_INCLUDES TK_INCLUDES TCL_THREADS SHARED_BUILD AR ac_ct_AR CELIB_DIR RC ac_ct_RC CFLAGS_DEBUG CFLAGS_OPTIMIZE CFLAGS_WARNING STLIB_LD SHLIB_LD SHLIB_LD_LIBS SHLIB_CFLAGS LD_LIBRARY_PATH_VAR CFLAGS_DEFAULT LDFLAGS_DEFAULT TCL_DBGX MAKE_LIB MAKE_SHARED_LIB MAKE_STATIC_LIB MAKE_STUB_LIB RANLIB_STUB VC_MANIFEST_EMBED_DLL VC_MANIFEST_EMBED_EXE TCLSH_PROG WISH_PROG tkimg_BUILD_LIB_SPEC tkimg_LIB_SPEC tkimg_BUILD_STUB_LIB_SPEC tkimg_STUB_LIB_SPEC tkimg_BUILD_STUB_LIB_PATH tkimg_STUB_LIB_PATH MAJOR_VERSION MINOR_VERSION PATCHLEVEL LIBOBJS LTLIBOBJS' +ac_subst_files='' + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datadir='${prefix}/share' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +libdir='${exec_prefix}/lib' +includedir='${prefix}/include' +oldincludedir='/usr/include' +infodir='${prefix}/info' +mandir='${prefix}/man' + +ac_prev= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval "$ac_prev=\$ac_option" + ac_prev= + continue + fi + + ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_option in + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad | --data | --dat | --da) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ + | --da=*) + datadir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/-/_/g'` + eval "enable_$ac_feature=no" ;; + + -enable-* | --enable-*) + ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/-/_/g'` + case $ac_option in + *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; + *) ac_optarg=yes ;; + esac + eval "enable_$ac_feature='$ac_optarg'" ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst \ + | --locals | --local | --loca | --loc | --lo) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* \ + | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package| sed 's/-/_/g'` + case $ac_option in + *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; + *) ac_optarg=yes ;; + esac + eval "with_$ac_package='$ac_optarg'" ;; + + -without-* | --without-*) + ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package | sed 's/-/_/g'` + eval "with_$ac_package=no" ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) { echo "$as_me: error: unrecognized option: $ac_option +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } + ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` + eval "$ac_envvar='$ac_optarg'" + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + { echo "$as_me: error: missing argument to $ac_option" >&2 + { (exit 1); exit 1; }; } +fi + +# Be sure to have absolute paths. +for ac_var in exec_prefix prefix +do + eval ac_val=$`echo $ac_var` + case $ac_val in + [\\/$]* | ?:[\\/]* | NONE | '' ) ;; + *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; };; + esac +done + +# Be sure to have absolute paths. +for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ + localstatedir libdir includedir oldincludedir infodir mandir +do + eval ac_val=$`echo $ac_var` + case $ac_val in + [\\/$]* | ?:[\\/]* ) ;; + *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; };; + esac +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used." >&2 + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then its parent. + ac_confdir=`(dirname "$0") 2>/dev/null || +$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$0" : 'X\(//\)[^/]' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$0" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r $srcdir/$ac_unique_file; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r $srcdir/$ac_unique_file; then + if test "$ac_srcdir_defaulted" = yes; then + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 + { (exit 1); exit 1; }; } + else + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } + fi +fi +(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || + { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 + { (exit 1); exit 1; }; } +srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` +ac_env_build_alias_set=${build_alias+set} +ac_env_build_alias_value=$build_alias +ac_cv_env_build_alias_set=${build_alias+set} +ac_cv_env_build_alias_value=$build_alias +ac_env_host_alias_set=${host_alias+set} +ac_env_host_alias_value=$host_alias +ac_cv_env_host_alias_set=${host_alias+set} +ac_cv_env_host_alias_value=$host_alias +ac_env_target_alias_set=${target_alias+set} +ac_env_target_alias_value=$target_alias +ac_cv_env_target_alias_set=${target_alias+set} +ac_cv_env_target_alias_value=$target_alias +ac_env_CC_set=${CC+set} +ac_env_CC_value=$CC +ac_cv_env_CC_set=${CC+set} +ac_cv_env_CC_value=$CC +ac_env_CFLAGS_set=${CFLAGS+set} +ac_env_CFLAGS_value=$CFLAGS +ac_cv_env_CFLAGS_set=${CFLAGS+set} +ac_cv_env_CFLAGS_value=$CFLAGS +ac_env_LDFLAGS_set=${LDFLAGS+set} +ac_env_LDFLAGS_value=$LDFLAGS +ac_cv_env_LDFLAGS_set=${LDFLAGS+set} +ac_cv_env_LDFLAGS_value=$LDFLAGS +ac_env_CPPFLAGS_set=${CPPFLAGS+set} +ac_env_CPPFLAGS_value=$CPPFLAGS +ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} +ac_cv_env_CPPFLAGS_value=$CPPFLAGS +ac_env_CPP_set=${CPP+set} +ac_env_CPP_value=$CPP +ac_cv_env_CPP_set=${CPP+set} +ac_cv_env_CPP_value=$CPP + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures tkimg 1.4.6 to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +_ACEOF + + cat <<_ACEOF +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --datadir=DIR read-only architecture-independent data [PREFIX/share] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --infodir=DIR info documentation [PREFIX/info] + --mandir=DIR man documentation [PREFIX/man] +_ACEOF + + cat <<\_ACEOF +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of tkimg 1.4.6:";; + esac + cat <<\_ACEOF + +Optional Features: + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --enable-threads build with threads + --enable-shared build and link with shared libraries (default: on) + --enable-64bit enable 64bit support (default: off) + --enable-64bit-vis enable 64bit Sparc VIS support (default: off) + --disable-rpath disable rpath support (default: on) + --enable-wince enable Win/CE support (where applicable) + --enable-symbols build with debugging symbols (default: off) + +Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-tcl directory containing tcl configuration + (tclConfig.sh) + --with-tk directory containing tk configuration (tkConfig.sh) + --with-tclinclude directory containing the public Tcl header files + --with-tkinclude directory containing the public Tk header files + --with-celib=DIR use Windows/CE support library from DIR + +Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory + CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have + headers in a nonstandard directory + CPP C preprocessor + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +_ACEOF +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + ac_popdir=`pwd` + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d $ac_dir || continue + ac_builddir=. + +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi + +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac + +# Do not use `cd foo && pwd` to compute absolute paths, because +# the directories may not exist. +case `pwd` in +.) ac_abs_builddir="$ac_dir";; +*) + case "$ac_dir" in + .) ac_abs_builddir=`pwd`;; + [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; + *) ac_abs_builddir=`pwd`/"$ac_dir";; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_builddir=${ac_top_builddir}.;; +*) + case ${ac_top_builddir}. in + .) ac_abs_top_builddir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; + *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_srcdir=$ac_srcdir;; +*) + case $ac_srcdir in + .) ac_abs_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; + *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_srcdir=$ac_top_srcdir;; +*) + case $ac_top_srcdir in + .) ac_abs_top_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; + *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; + esac;; +esac + + cd $ac_dir + # Check for guested configure; otherwise get Cygnus style configure. + if test -f $ac_srcdir/configure.gnu; then + echo + $SHELL $ac_srcdir/configure.gnu --help=recursive + elif test -f $ac_srcdir/configure; then + echo + $SHELL $ac_srcdir/configure --help=recursive + elif test -f $ac_srcdir/configure.ac || + test -f $ac_srcdir/configure.in; then + echo + $ac_configure --help + else + echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi + cd $ac_popdir + done +fi + +test -n "$ac_init_help" && exit 0 +if $ac_init_version; then + cat <<\_ACEOF +tkimg configure 1.4.6 +generated by GNU Autoconf 2.59 + +Copyright (C) 2003 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit 0 +fi +exec 5>config.log +cat >&5 <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by tkimg $as_me 1.4.6, which was +generated by GNU Autoconf 2.59. Invocation command line was + + $ $0 $@ + +_ACEOF +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +hostinfo = `(hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + echo "PATH: $as_dir" +done + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_sep= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 2) + ac_configure_args1="$ac_configure_args1 '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" + # Get rid of the leading space. + ac_sep=" " + ;; + esac + done +done +$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } +$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Be sure not to use single quotes in there, as some shells, +# such as our DU 5.0 friend, will then `close' the trap. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + cat <<\_ASBOX +## ---------------- ## +## Cache variables. ## +## ---------------- ## +_ASBOX + echo + # The following way of writing the cache mishandles newlines in values, +{ + (set) 2>&1 | + case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in + *ac_space=\ *) + sed -n \ + "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" + ;; + *) + sed -n \ + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + ;; + esac; +} + echo + + cat <<\_ASBOX +## ----------------- ## +## Output variables. ## +## ----------------- ## +_ASBOX + echo + for ac_var in $ac_subst_vars + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + + if test -n "$ac_subst_files"; then + cat <<\_ASBOX +## ------------- ## +## Output files. ## +## ------------- ## +_ASBOX + echo + for ac_var in $ac_subst_files + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + fi + + if test -s confdefs.h; then + cat <<\_ASBOX +## ----------- ## +## confdefs.h. ## +## ----------- ## +_ASBOX + echo + sed "/^$/d" confdefs.h | sort + echo + fi + test "$ac_signal" != 0 && + echo "$as_me: caught signal $ac_signal" + echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core && + rm -rf conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status + ' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -rf conftest* confdefs.h +# AIX cpp loses on an empty file, so make sure it contains at least a newline. +echo >confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer explicitly selected file to automatically selected ones. +if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi +fi +for ac_site_file in $CONFIG_SITE; do + if test -r "$ac_site_file"; then + { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 +echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special + # files actually), so we avoid doing that. + if test -f "$cache_file"; then + { echo "$as_me:$LINENO: loading cache $cache_file" >&5 +echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . $cache_file;; + *) . ./$cache_file;; + esac + fi +else + { echo "$as_me:$LINENO: creating cache $cache_file" >&5 +echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in `(set) 2>&1 | + sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val="\$ac_cv_env_${ac_var}_value" + eval ac_new_val="\$ac_env_${ac_var}_value" + case $ac_old_set,$ac_new_set in + set,) + { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 +echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 +echo "$as_me: former value: $ac_old_val" >&2;} + { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 +echo "$as_me: current value: $ac_new_val" >&2;} + ac_cache_corrupted=: + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 +echo "$as_me: error: changes in the environment can compromise the build" >&2;} + { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 +echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} + { (exit 1); exit 1; }; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + # TEA extensions pass this us the version of TEA they think they + # are compatible with. + TEA_VERSION="3.9" + + echo "$as_me:$LINENO: checking for correct TEA configuration" >&5 +echo $ECHO_N "checking for correct TEA configuration... $ECHO_C" >&6 + if test x"${PACKAGE_NAME}" = x ; then + { { echo "$as_me:$LINENO: error: +The PACKAGE_NAME variable must be defined by your TEA configure.in" >&5 +echo "$as_me: error: +The PACKAGE_NAME variable must be defined by your TEA configure.in" >&2;} + { (exit 1); exit 1; }; } + fi + if test x"3.9" = x ; then + { { echo "$as_me:$LINENO: error: +TEA version not specified." >&5 +echo "$as_me: error: +TEA version not specified." >&2;} + { (exit 1); exit 1; }; } + elif test "3.9" != "${TEA_VERSION}" ; then + echo "$as_me:$LINENO: result: warning: requested TEA version \"3.9\", have \"${TEA_VERSION}\"" >&5 +echo "${ECHO_T}warning: requested TEA version \"3.9\", have \"${TEA_VERSION}\"" >&6 + else + echo "$as_me:$LINENO: result: ok (TEA ${TEA_VERSION})" >&5 +echo "${ECHO_T}ok (TEA ${TEA_VERSION})" >&6 + fi + + # If the user did not set CFLAGS, set it now to keep macros + # like AC_PROG_CC and AC_TRY_COMPILE from adding "-g -O2". + if test "${CFLAGS+set}" != "set" ; then + CFLAGS="" + fi + + case "`uname -s`" in + *win32*|*WIN32*|*MINGW32_*) + # Extract the first word of "cygpath", so it can be a program name with args. +set dummy cygpath; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CYGPATH+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CYGPATH"; then + ac_cv_prog_CYGPATH="$CYGPATH" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CYGPATH="cygpath -w" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_CYGPATH" && ac_cv_prog_CYGPATH="echo" +fi +fi +CYGPATH=$ac_cv_prog_CYGPATH +if test -n "$CYGPATH"; then + echo "$as_me:$LINENO: result: $CYGPATH" >&5 +echo "${ECHO_T}$CYGPATH" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + EXEEXT=".exe" + TEA_PLATFORM="windows" + ;; + *CYGWIN_*) + CYGPATH=echo + EXEEXT=".exe" + # TEA_PLATFORM is determined later in LOAD_TCLCONFIG + ;; + *) + CYGPATH=echo + # Maybe we are cross-compiling.... + case ${host_alias} in + *mingw32*) + EXEEXT=".exe" + TEA_PLATFORM="windows" + ;; + *) + EXEEXT="" + TEA_PLATFORM="unix" + ;; + esac + ;; + esac + + # Check if exec_prefix is set. If not use fall back to prefix. + # Note when adjusted, so that TEA_PREFIX can correct for this. + # This is needed for recursive configures, since autoconf propagates + # $prefix, but not $exec_prefix (doh!). + if test x$exec_prefix = xNONE ; then + exec_prefix_default=yes + exec_prefix=$prefix + fi + + { echo "$as_me:$LINENO: configuring ${PACKAGE_NAME} ${PACKAGE_VERSION}" >&5 +echo "$as_me: configuring ${PACKAGE_NAME} ${PACKAGE_VERSION}" >&6;} + + + + + # This package name must be replaced statically for AC_SUBST to work + + # Substitute STUB_LIB_FILE in case package creates a stub library too. + + + # We AC_SUBST these here to ensure they are subst'ed, + # in case the user doesn't call TEA_ADD_... + + + + + + + + + +ac_aux_dir= +for ac_dir in ../tclconfig $srcdir/../tclconfig; do + if test -f $ac_dir/install-sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f $ac_dir/install.sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f $ac_dir/shtool; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../tclconfig $srcdir/../tclconfig" >&5 +echo "$as_me: error: cannot find install-sh or install.sh in ../tclconfig $srcdir/../tclconfig" >&2;} + { (exit 1); exit 1; }; } +fi +ac_config_guess="$SHELL $ac_aux_dir/config.guess" +ac_config_sub="$SHELL $ac_aux_dir/config.sub" +ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. + + +PACKAGE_TCLNAME="img::base" + + +#-------------------------------------------------------------------- +# Load the tclConfig.sh file +# Load the tkConfig.sh file +#-------------------------------------------------------------------- + + + + # + # Ok, lets find the tcl configuration + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-tcl + # + + if test x"${no_tcl}" = x ; then + # we reset no_tcl in case something fails here + no_tcl=true + +# Check whether --with-tcl or --without-tcl was given. +if test "${with_tcl+set}" = set; then + withval="$with_tcl" + with_tclconfig="${withval}" +fi; + echo "$as_me:$LINENO: checking for Tcl configuration" >&5 +echo $ECHO_N "checking for Tcl configuration... $ECHO_C" >&6 + if test "${ac_cv_c_tclconfig+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + + # First check to see if --with-tcl was specified. + if test x"${with_tclconfig}" != x ; then + case "${with_tclconfig}" in + */tclConfig.sh ) + if test -f "${with_tclconfig}"; then + { echo "$as_me:$LINENO: WARNING: --with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself" >&5 +echo "$as_me: WARNING: --with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself" >&2;} + with_tclconfig="`echo "${with_tclconfig}" | sed 's!/tclConfig\.sh$!!'`" + fi ;; + esac + if test -f "${with_tclconfig}/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd "${with_tclconfig}"; pwd)`" + else + { { echo "$as_me:$LINENO: error: ${with_tclconfig} directory doesn't contain tclConfig.sh" >&5 +echo "$as_me: error: ${with_tclconfig} directory doesn't contain tclConfig.sh" >&2;} + { (exit 1); exit 1; }; } + fi + fi + + # then check for a private Tcl installation + if test x"${ac_cv_c_tclconfig}" = x ; then + for i in \ + ../tcl \ + `ls -dr ../tcl[8-9].[0-9].[0-9]* 2>/dev/null` \ + `ls -dr ../tcl[8-9].[0-9] 2>/dev/null` \ + `ls -dr ../tcl[8-9].[0-9]* 2>/dev/null` \ + ../../tcl \ + `ls -dr ../../tcl[8-9].[0-9].[0-9]* 2>/dev/null` \ + `ls -dr ../../tcl[8-9].[0-9] 2>/dev/null` \ + `ls -dr ../../tcl[8-9].[0-9]* 2>/dev/null` \ + ../../../tcl \ + `ls -dr ../../../tcl[8-9].[0-9].[0-9]* 2>/dev/null` \ + `ls -dr ../../../tcl[8-9].[0-9] 2>/dev/null` \ + `ls -dr ../../../tcl[8-9].[0-9]* 2>/dev/null` ; do + if test "${TEA_PLATFORM}" = "windows" \ + -a -f "$i/win/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i/win; pwd)`" + break + fi + if test -f "$i/unix/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i/unix; pwd)`" + break + fi + done + fi + + # on Darwin, check in Framework installation locations + if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tclconfig}" = x ; then + for i in `ls -d ~/Library/Frameworks 2>/dev/null` \ + `ls -d /Library/Frameworks 2>/dev/null` \ + `ls -d /Network/Library/Frameworks 2>/dev/null` \ + `ls -d /System/Library/Frameworks 2>/dev/null` \ + ; do + if test -f "$i/Tcl.framework/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i/Tcl.framework; pwd)`" + break + fi + done + fi + + # TEA specific: on Windows, check in common installation locations + if test "${TEA_PLATFORM}" = "windows" \ + -a x"${ac_cv_c_tclconfig}" = x ; then + for i in `ls -d C:/Tcl/lib 2>/dev/null` \ + `ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \ + ; do + if test -f "$i/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i; pwd)`" + break + fi + done + fi + + # check in a few common install locations + if test x"${ac_cv_c_tclconfig}" = x ; then + for i in `ls -d ${libdir} 2>/dev/null` \ + `ls -d ${exec_prefix}/lib 2>/dev/null` \ + `ls -d ${prefix}/lib 2>/dev/null` \ + `ls -d /usr/local/lib 2>/dev/null` \ + `ls -d /usr/contrib/lib 2>/dev/null` \ + `ls -d /usr/lib 2>/dev/null` \ + `ls -d /usr/lib64 2>/dev/null` \ + `ls -d /usr/lib/tcl8.6 2>/dev/null` \ + `ls -d /usr/lib/tcl8.5 2>/dev/null` \ + ; do + if test -f "$i/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i; pwd)`" + break + fi + done + fi + + # check in a few other private locations + if test x"${ac_cv_c_tclconfig}" = x ; then + for i in \ + ${srcdir}/../tcl \ + `ls -dr ${srcdir}/../tcl[8-9].[0-9].[0-9]* 2>/dev/null` \ + `ls -dr ${srcdir}/../tcl[8-9].[0-9] 2>/dev/null` \ + `ls -dr ${srcdir}/../tcl[8-9].[0-9]* 2>/dev/null` ; do + if test "${TEA_PLATFORM}" = "windows" \ + -a -f "$i/win/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i/win; pwd)`" + break + fi + if test -f "$i/unix/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i/unix; pwd)`" + break + fi + done + fi + +fi + + + if test x"${ac_cv_c_tclconfig}" = x ; then + TCL_BIN_DIR="# no Tcl configs found" + { { echo "$as_me:$LINENO: error: Can't find Tcl configuration definitions. Use --with-tcl to specify a directory containing tclConfig.sh" >&5 +echo "$as_me: error: Can't find Tcl configuration definitions. Use --with-tcl to specify a directory containing tclConfig.sh" >&2;} + { (exit 1); exit 1; }; } + else + no_tcl= + TCL_BIN_DIR="${ac_cv_c_tclconfig}" + echo "$as_me:$LINENO: result: found ${TCL_BIN_DIR}/tclConfig.sh" >&5 +echo "${ECHO_T}found ${TCL_BIN_DIR}/tclConfig.sh" >&6 + fi + fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + CC=$ac_ct_CC +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + CC=$ac_ct_CC +else + CC="$ac_cv_prog_CC" +fi + +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$ac_ct_CC" && break +done + + CC=$ac_ct_CC +fi + +fi + + +test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&5 +echo "$as_me: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + +# Provide some information about the compiler. +echo "$as_me:$LINENO:" \ + "checking for C compiler version" >&5 +ac_compiler=`set X $ac_compile; echo $2` +{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 + (eval $ac_compiler --version &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 + (eval $ac_compiler -v &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 + (eval $ac_compiler -V &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 +echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6 +ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` +if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 + (eval $ac_link_default) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # Find the output, starting from the most likely. This scheme is +# not robust to junk in `.', hence go to wildcards (a.*) only as a last +# resort. + +# Be careful to initialize this variable, since it used to be cached. +# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. +ac_cv_exeext= +# b.out is created by i960 compilers. +for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) + ;; + conftest.$ac_ext ) + # This is the source file. + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + # FIXME: I believe we export ac_cv_exeext for Libtool, + # but it would be cool to find out if it's true. Does anybody + # maintain Libtool? --akim. + export ac_cv_exeext + break;; + * ) + break;; + esac +done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { echo "$as_me:$LINENO: error: C compiler cannot create executables +See \`config.log' for more details." >&5 +echo "$as_me: error: C compiler cannot create executables +See \`config.log' for more details." >&2;} + { (exit 77); exit 77; }; } +fi + +ac_exeext=$ac_cv_exeext +echo "$as_me:$LINENO: result: $ac_file" >&5 +echo "${ECHO_T}$ac_file" >&6 + +# Check the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +echo "$as_me:$LINENO: checking whether the C compiler works" >&5 +echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 +# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 +# If not cross compiling, check that we can run a simple program. +if test "$cross_compiling" != yes; then + if { ac_try='./$ac_file' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { echo "$as_me:$LINENO: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + fi + fi +fi +echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + +rm -f a.out a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +# Check the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 +echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 +echo "$as_me:$LINENO: result: $cross_compiling" >&5 +echo "${ECHO_T}$cross_compiling" >&6 + +echo "$as_me:$LINENO: checking for suffix of executables" >&5 +echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + export ac_cv_exeext + break;; + * ) break;; + esac +done +else + { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +rm -f conftest$ac_cv_exeext +echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 +echo "${ECHO_T}$ac_cv_exeext" >&6 + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +echo "$as_me:$LINENO: checking for suffix of object files" >&5 +echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 +if test "${ac_cv_objext+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 +echo "${ECHO_T}$ac_cv_objext" >&6 +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 +if test "${ac_cv_c_compiler_gnu+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_compiler_gnu=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_compiler_gnu=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 +GCC=`test $ac_compiler_gnu = yes && echo yes` +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +CFLAGS="-g" +echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_prog_cc_g=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_prog_cc_g=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 +echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_prog_cc_stdc=no +ac_save_CC=$CC +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#include +#include +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std1 is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std1. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +# Don't try gcc -ansi; that turns off useful extensions and +# breaks some systems' header files. +# AIX -qlanglvl=ansi +# Ultrix and OSF/1 -std1 +# HP-UX 10.20 and later -Ae +# HP-UX older versions -Aa -D_HPUX_SOURCE +# SVR4 -Xc -D__EXTENSIONS__ +for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_prog_cc_stdc=$ac_arg +break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext +done +rm -f conftest.$ac_ext conftest.$ac_objext +CC=$ac_save_CC + +fi + +case "x$ac_cv_prog_cc_stdc" in + x|xno) + echo "$as_me:$LINENO: result: none needed" >&5 +echo "${ECHO_T}none needed" >&6 ;; + *) + echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 + CC="$CC $ac_cv_prog_cc_stdc" ;; +esac + +# Some people use a C++ compiler to compile C. Since we use `exit', +# in C++ we need to declare it. In case someone uses the same compiler +# for both compiling C and C++ we need to have the C++ compiler decide +# the declaration of exit, since it's the most demanding environment. +cat >conftest.$ac_ext <<_ACEOF +#ifndef __cplusplus + choke me +#endif +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + for ac_declaration in \ + '' \ + 'extern "C" void std::exit (int) throw (); using std::exit;' \ + 'extern "C" void std::exit (int); using std::exit;' \ + 'extern "C" void exit (int) throw ();' \ + 'extern "C" void exit (int);' \ + 'void exit (int);' +do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_declaration +#include +int +main () +{ +exit (42); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +continue +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_declaration +int +main () +{ +exit (42); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +done +rm -f conftest* +if test -n "$ac_declaration"; then + echo '#ifdef __cplusplus' >>confdefs.h + echo $ac_declaration >>confdefs.h + echo '#endif' >>confdefs.h +fi + +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + echo "$as_me:$LINENO: checking for existence of ${TCL_BIN_DIR}/tclConfig.sh" >&5 +echo $ECHO_N "checking for existence of ${TCL_BIN_DIR}/tclConfig.sh... $ECHO_C" >&6 + + if test -f "${TCL_BIN_DIR}/tclConfig.sh" ; then + echo "$as_me:$LINENO: result: loading" >&5 +echo "${ECHO_T}loading" >&6 + . "${TCL_BIN_DIR}/tclConfig.sh" + else + echo "$as_me:$LINENO: result: could not find ${TCL_BIN_DIR}/tclConfig.sh" >&5 +echo "${ECHO_T}could not find ${TCL_BIN_DIR}/tclConfig.sh" >&6 + fi + + # eval is required to do the TCL_DBGX substitution + eval "TCL_LIB_FILE=\"${TCL_LIB_FILE}\"" + eval "TCL_STUB_LIB_FILE=\"${TCL_STUB_LIB_FILE}\"" + + # If the TCL_BIN_DIR is the build directory (not the install directory), + # then set the common variable name to the value of the build variables. + # For example, the variable TCL_LIB_SPEC will be set to the value + # of TCL_BUILD_LIB_SPEC. An extension should make use of TCL_LIB_SPEC + # instead of TCL_BUILD_LIB_SPEC since it will work with both an + # installed and uninstalled version of Tcl. + if test -f "${TCL_BIN_DIR}/Makefile" ; then + TCL_LIB_SPEC="${TCL_BUILD_LIB_SPEC}" + TCL_STUB_LIB_SPEC="${TCL_BUILD_STUB_LIB_SPEC}" + TCL_STUB_LIB_PATH="${TCL_BUILD_STUB_LIB_PATH}" + elif test "`uname -s`" = "Darwin"; then + # If Tcl was built as a framework, attempt to use the libraries + # from the framework at the given location so that linking works + # against Tcl.framework installed in an arbitrary location. + case ${TCL_DEFS} in + *TCL_FRAMEWORK*) + if test -f "${TCL_BIN_DIR}/${TCL_LIB_FILE}"; then + for i in "`cd "${TCL_BIN_DIR}"; pwd`" \ + "`cd "${TCL_BIN_DIR}"/../..; pwd`"; do + if test "`basename "$i"`" = "${TCL_LIB_FILE}.framework"; then + TCL_LIB_SPEC="-F`dirname "$i" | sed -e 's/ /\\\\ /g'` -framework ${TCL_LIB_FILE}" + break + fi + done + fi + if test -f "${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}"; then + TCL_STUB_LIB_SPEC="-L`echo "${TCL_BIN_DIR}" | sed -e 's/ /\\\\ /g'` ${TCL_STUB_LIB_FLAG}" + TCL_STUB_LIB_PATH="${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}" + fi + ;; + esac + fi + + # eval is required to do the TCL_DBGX substitution + eval "TCL_LIB_FLAG=\"${TCL_LIB_FLAG}\"" + eval "TCL_LIB_SPEC=\"${TCL_LIB_SPEC}\"" + eval "TCL_STUB_LIB_FLAG=\"${TCL_STUB_LIB_FLAG}\"" + eval "TCL_STUB_LIB_SPEC=\"${TCL_STUB_LIB_SPEC}\"" + + + + + + + + + + + + + + + echo "$as_me:$LINENO: checking platform" >&5 +echo $ECHO_N "checking platform... $ECHO_C" >&6 + hold_cc=$CC; CC="$TCL_CC" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + #ifdef _WIN32 + #error win32 + #endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + TEA_PLATFORM="unix" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +TEA_PLATFORM="windows" + +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + CC=$hold_cc + echo "$as_me:$LINENO: result: $TEA_PLATFORM" >&5 +echo "${ECHO_T}$TEA_PLATFORM" >&6 + + # The BUILD_$pkg is to define the correct extern storage class + # handling when making this package + +cat >>confdefs.h <<_ACEOF +#define BUILD_${PACKAGE_NAME} +_ACEOF + + # Do this here as we have fully defined TEA_PLATFORM now + if test "${TEA_PLATFORM}" = "windows" ; then + EXEEXT=".exe" + CLEANFILES="$CLEANFILES *.lib *.dll *.pdb *.exp" + fi + + # TEA specific: + + + + + + + + + + # + # Ok, lets find the tk configuration + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-tk + # + + if test x"${no_tk}" = x ; then + # we reset no_tk in case something fails here + no_tk=true + +# Check whether --with-tk or --without-tk was given. +if test "${with_tk+set}" = set; then + withval="$with_tk" + with_tkconfig="${withval}" +fi; + echo "$as_me:$LINENO: checking for Tk configuration" >&5 +echo $ECHO_N "checking for Tk configuration... $ECHO_C" >&6 + if test "${ac_cv_c_tkconfig+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + + # First check to see if --with-tkconfig was specified. + if test x"${with_tkconfig}" != x ; then + case "${with_tkconfig}" in + */tkConfig.sh ) + if test -f "${with_tkconfig}"; then + { echo "$as_me:$LINENO: WARNING: --with-tk argument should refer to directory containing tkConfig.sh, not to tkConfig.sh itself" >&5 +echo "$as_me: WARNING: --with-tk argument should refer to directory containing tkConfig.sh, not to tkConfig.sh itself" >&2;} + with_tkconfig="`echo "${with_tkconfig}" | sed 's!/tkConfig\.sh$!!'`" + fi ;; + esac + if test -f "${with_tkconfig}/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd "${with_tkconfig}"; pwd)`" + else + { { echo "$as_me:$LINENO: error: ${with_tkconfig} directory doesn't contain tkConfig.sh" >&5 +echo "$as_me: error: ${with_tkconfig} directory doesn't contain tkConfig.sh" >&2;} + { (exit 1); exit 1; }; } + fi + fi + + # then check for a private Tk library + if test x"${ac_cv_c_tkconfig}" = x ; then + for i in \ + ../tk \ + `ls -dr ../tk[8-9].[0-9].[0-9]* 2>/dev/null` \ + `ls -dr ../tk[8-9].[0-9] 2>/dev/null` \ + `ls -dr ../tk[8-9].[0-9]* 2>/dev/null` \ + ../../tk \ + `ls -dr ../../tk[8-9].[0-9].[0-9]* 2>/dev/null` \ + `ls -dr ../../tk[8-9].[0-9] 2>/dev/null` \ + `ls -dr ../../tk[8-9].[0-9]* 2>/dev/null` \ + ../../../tk \ + `ls -dr ../../../tk[8-9].[0-9].[0-9]* 2>/dev/null` \ + `ls -dr ../../../tk[8-9].[0-9] 2>/dev/null` \ + `ls -dr ../../../tk[8-9].[0-9]* 2>/dev/null` ; do + if test "${TEA_PLATFORM}" = "windows" \ + -a -f "$i/win/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i/win; pwd)`" + break + fi + if test -f "$i/unix/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i/unix; pwd)`" + break + fi + done + fi + + # on Darwin, check in Framework installation locations + if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tkconfig}" = x ; then + for i in `ls -d ~/Library/Frameworks 2>/dev/null` \ + `ls -d /Library/Frameworks 2>/dev/null` \ + `ls -d /Network/Library/Frameworks 2>/dev/null` \ + `ls -d /System/Library/Frameworks 2>/dev/null` \ + ; do + if test -f "$i/Tk.framework/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i/Tk.framework; pwd)`" + break + fi + done + fi + + # check in a few common install locations + if test x"${ac_cv_c_tkconfig}" = x ; then + for i in `ls -d ${libdir} 2>/dev/null` \ + `ls -d ${exec_prefix}/lib 2>/dev/null` \ + `ls -d ${prefix}/lib 2>/dev/null` \ + `ls -d /usr/local/lib 2>/dev/null` \ + `ls -d /usr/contrib/lib 2>/dev/null` \ + `ls -d /usr/lib 2>/dev/null` \ + `ls -d /usr/lib64 2>/dev/null` \ + ; do + if test -f "$i/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i; pwd)`" + break + fi + done + fi + + # TEA specific: on Windows, check in common installation locations + if test "${TEA_PLATFORM}" = "windows" \ + -a x"${ac_cv_c_tkconfig}" = x ; then + for i in `ls -d C:/Tcl/lib 2>/dev/null` \ + `ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \ + ; do + if test -f "$i/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i; pwd)`" + break + fi + done + fi + + # check in a few other private locations + if test x"${ac_cv_c_tkconfig}" = x ; then + for i in \ + ${srcdir}/../tk \ + `ls -dr ${srcdir}/../tk[8-9].[0-9].[0-9]* 2>/dev/null` \ + `ls -dr ${srcdir}/../tk[8-9].[0-9] 2>/dev/null` \ + `ls -dr ${srcdir}/../tk[8-9].[0-9]* 2>/dev/null` ; do + if test "${TEA_PLATFORM}" = "windows" \ + -a -f "$i/win/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i/win; pwd)`" + break + fi + if test -f "$i/unix/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i/unix; pwd)`" + break + fi + done + fi + +fi + + + if test x"${ac_cv_c_tkconfig}" = x ; then + TK_BIN_DIR="# no Tk configs found" + { { echo "$as_me:$LINENO: error: Can't find Tk configuration definitions. Use --with-tk to specify a directory containing tkConfig.sh" >&5 +echo "$as_me: error: Can't find Tk configuration definitions. Use --with-tk to specify a directory containing tkConfig.sh" >&2;} + { (exit 1); exit 1; }; } + else + no_tk= + TK_BIN_DIR="${ac_cv_c_tkconfig}" + echo "$as_me:$LINENO: result: found ${TK_BIN_DIR}/tkConfig.sh" >&5 +echo "${ECHO_T}found ${TK_BIN_DIR}/tkConfig.sh" >&6 + fi + fi + + + echo "$as_me:$LINENO: checking for existence of ${TK_BIN_DIR}/tkConfig.sh" >&5 +echo $ECHO_N "checking for existence of ${TK_BIN_DIR}/tkConfig.sh... $ECHO_C" >&6 + + if test -f "${TK_BIN_DIR}/tkConfig.sh" ; then + echo "$as_me:$LINENO: result: loading" >&5 +echo "${ECHO_T}loading" >&6 + . "${TK_BIN_DIR}/tkConfig.sh" + else + echo "$as_me:$LINENO: result: could not find ${TK_BIN_DIR}/tkConfig.sh" >&5 +echo "${ECHO_T}could not find ${TK_BIN_DIR}/tkConfig.sh" >&6 + fi + + # eval is required to do the TK_DBGX substitution + eval "TK_LIB_FILE=\"${TK_LIB_FILE}\"" + eval "TK_STUB_LIB_FILE=\"${TK_STUB_LIB_FILE}\"" + + # If the TK_BIN_DIR is the build directory (not the install directory), + # then set the common variable name to the value of the build variables. + # For example, the variable TK_LIB_SPEC will be set to the value + # of TK_BUILD_LIB_SPEC. An extension should make use of TK_LIB_SPEC + # instead of TK_BUILD_LIB_SPEC since it will work with both an + # installed and uninstalled version of Tcl. + if test -f "${TK_BIN_DIR}/Makefile" ; then + TK_LIB_SPEC="${TK_BUILD_LIB_SPEC}" + TK_STUB_LIB_SPEC="${TK_BUILD_STUB_LIB_SPEC}" + TK_STUB_LIB_PATH="${TK_BUILD_STUB_LIB_PATH}" + elif test "`uname -s`" = "Darwin"; then + # If Tk was built as a framework, attempt to use the libraries + # from the framework at the given location so that linking works + # against Tk.framework installed in an arbitrary location. + case ${TK_DEFS} in + *TK_FRAMEWORK*) + if test -f "${TK_BIN_DIR}/${TK_LIB_FILE}"; then + for i in "`cd "${TK_BIN_DIR}"; pwd`" \ + "`cd "${TK_BIN_DIR}"/../..; pwd`"; do + if test "`basename "$i"`" = "${TK_LIB_FILE}.framework"; then + TK_LIB_SPEC="-F`dirname "$i" | sed -e 's/ /\\\\ /g'` -framework ${TK_LIB_FILE}" + break + fi + done + fi + if test -f "${TK_BIN_DIR}/${TK_STUB_LIB_FILE}"; then + TK_STUB_LIB_SPEC="-L` echo "${TK_BIN_DIR}" | sed -e 's/ /\\\\ /g'` ${TK_STUB_LIB_FLAG}" + TK_STUB_LIB_PATH="${TK_BIN_DIR}/${TK_STUB_LIB_FILE}" + fi + ;; + esac + fi + + # eval is required to do the TK_DBGX substitution + eval "TK_LIB_FLAG=\"${TK_LIB_FLAG}\"" + eval "TK_LIB_SPEC=\"${TK_LIB_SPEC}\"" + eval "TK_STUB_LIB_FLAG=\"${TK_STUB_LIB_FLAG}\"" + eval "TK_STUB_LIB_SPEC=\"${TK_STUB_LIB_SPEC}\"" + + # TEA specific: Ensure windowingsystem is defined + if test "${TEA_PLATFORM}" = "unix" ; then + case ${TK_DEFS} in + *MAC_OSX_TK*) + +cat >>confdefs.h <<\_ACEOF +#define MAC_OSX_TK 1 +_ACEOF + + TEA_WINDOWINGSYSTEM="aqua" + ;; + *) + TEA_WINDOWINGSYSTEM="x11" + ;; + esac + elif test "${TEA_PLATFORM}" = "windows" ; then + TEA_WINDOWINGSYSTEM="win32" + fi + + + + + + + + + + + + + + # TEA specific: + + + + +#----------------------------------------------------------------------- +# Handle the --prefix=... option by defaulting to what Tcl gave. +# Must be called after TEA_LOAD_TCLCONFIG and before TEA_SETUP_COMPILER. +#----------------------------------------------------------------------- + + + if test "${prefix}" = "NONE"; then + prefix_default=yes + if test x"${TCL_PREFIX}" != x; then + { echo "$as_me:$LINENO: --prefix defaulting to TCL_PREFIX ${TCL_PREFIX}" >&5 +echo "$as_me: --prefix defaulting to TCL_PREFIX ${TCL_PREFIX}" >&6;} + prefix=${TCL_PREFIX} + else + { echo "$as_me:$LINENO: --prefix defaulting to /usr/local" >&5 +echo "$as_me: --prefix defaulting to /usr/local" >&6;} + prefix=/usr/local + fi + fi + if test "${exec_prefix}" = "NONE" -a x"${prefix_default}" = x"yes" \ + -o x"${exec_prefix_default}" = x"yes" ; then + if test x"${TCL_EXEC_PREFIX}" != x; then + { echo "$as_me:$LINENO: --exec-prefix defaulting to TCL_EXEC_PREFIX ${TCL_EXEC_PREFIX}" >&5 +echo "$as_me: --exec-prefix defaulting to TCL_EXEC_PREFIX ${TCL_EXEC_PREFIX}" >&6;} + exec_prefix=${TCL_EXEC_PREFIX} + else + { echo "$as_me:$LINENO: --exec-prefix defaulting to ${prefix}" >&5 +echo "$as_me: --exec-prefix defaulting to ${prefix}" >&6;} + exec_prefix=$prefix + fi + fi + + +#----------------------------------------------------------------------- +# Standard compiler checks. +# This sets up CC by using the CC env var, or looks for gcc otherwise. +# This also calls AC_PROG_CC, AC_PROG_INSTALL and a few others to create +# the basic setup necessary to compile executables. +#----------------------------------------------------------------------- + + + # Don't put any macros that use the compiler (e.g. AC_TRY_COMPILE) + # in this macro, they need to go into TEA_SETUP_COMPILER instead. + + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + CC=$ac_ct_CC +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + CC=$ac_ct_CC +else + CC="$ac_cv_prog_CC" +fi + +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$ac_ct_CC" && break +done + + CC=$ac_ct_CC +fi + +fi + + +test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&5 +echo "$as_me: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + +# Provide some information about the compiler. +echo "$as_me:$LINENO:" \ + "checking for C compiler version" >&5 +ac_compiler=`set X $ac_compile; echo $2` +{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 + (eval $ac_compiler --version &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 + (eval $ac_compiler -v &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 + (eval $ac_compiler -V &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + +echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 +if test "${ac_cv_c_compiler_gnu+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_compiler_gnu=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_compiler_gnu=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 +GCC=`test $ac_compiler_gnu = yes && echo yes` +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +CFLAGS="-g" +echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_prog_cc_g=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_prog_cc_g=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 +echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_prog_cc_stdc=no +ac_save_CC=$CC +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#include +#include +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std1 is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std1. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +# Don't try gcc -ansi; that turns off useful extensions and +# breaks some systems' header files. +# AIX -qlanglvl=ansi +# Ultrix and OSF/1 -std1 +# HP-UX 10.20 and later -Ae +# HP-UX older versions -Aa -D_HPUX_SOURCE +# SVR4 -Xc -D__EXTENSIONS__ +for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_prog_cc_stdc=$ac_arg +break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext +done +rm -f conftest.$ac_ext conftest.$ac_objext +CC=$ac_save_CC + +fi + +case "x$ac_cv_prog_cc_stdc" in + x|xno) + echo "$as_me:$LINENO: result: none needed" >&5 +echo "${ECHO_T}none needed" >&6 ;; + *) + echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 + CC="$CC $ac_cv_prog_cc_stdc" ;; +esac + +# Some people use a C++ compiler to compile C. Since we use `exit', +# in C++ we need to declare it. In case someone uses the same compiler +# for both compiling C and C++ we need to have the C++ compiler decide +# the declaration of exit, since it's the most demanding environment. +cat >conftest.$ac_ext <<_ACEOF +#ifndef __cplusplus + choke me +#endif +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + for ac_declaration in \ + '' \ + 'extern "C" void std::exit (int) throw (); using std::exit;' \ + 'extern "C" void std::exit (int); using std::exit;' \ + 'extern "C" void exit (int) throw ();' \ + 'extern "C" void exit (int);' \ + 'void exit (int);' +do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_declaration +#include +int +main () +{ +exit (42); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +continue +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_declaration +int +main () +{ +exit (42); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +done +rm -f conftest* +if test -n "$ac_declaration"; then + echo '#ifdef __cplusplus' >>confdefs.h + echo $ac_declaration >>confdefs.h + echo '#endif' >>confdefs.h +fi + +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 +echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if test "${ac_cv_prog_CPP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + break +fi + + done + ac_cv_prog_CPP=$CPP + +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +echo "$as_me:$LINENO: result: $CPP" >&5 +echo "${ECHO_T}$CPP" >&6 +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + : +else + { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&5 +echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + INSTALL='$(SHELL) $(srcdir)/tclconfig/install-sh -c' + INSTALL_DATA_DIR='${INSTALL} -d -m 755' + INSTALL_DATA='${INSTALL} -m 644' + INSTALL_PROGRAM='${INSTALL}' + INSTALL_SCRIPT='${INSTALL}' + INSTALL_LIBRARY='${INSTALL_DATA}' + + + + + + + + + #-------------------------------------------------------------------- + # Checks to see if the make program sets the $MAKE variable. + #-------------------------------------------------------------------- + + echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 +set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` +if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.make <<\_ACEOF +all: + @echo 'ac_maketemp="$(MAKE)"' +_ACEOF +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` +if test -n "$ac_maketemp"; then + eval ac_cv_prog_make_${ac_make}_set=yes +else + eval ac_cv_prog_make_${ac_make}_set=no +fi +rm -f conftest.make +fi +if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + SET_MAKE= +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 + SET_MAKE="MAKE=${MAKE-make}" +fi + + + #-------------------------------------------------------------------- + # Find ranlib + #-------------------------------------------------------------------- + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + echo "$as_me:$LINENO: result: $RANLIB" >&5 +echo "${ECHO_T}$RANLIB" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 +echo "${ECHO_T}$ac_ct_RANLIB" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + RANLIB=$ac_ct_RANLIB +else + RANLIB="$ac_cv_prog_RANLIB" +fi + + + #-------------------------------------------------------------------- + # Determines the correct binary file extension (.o, .obj, .exe etc.) + #-------------------------------------------------------------------- + + + + + +echo "$as_me:$LINENO: checking for egrep" >&5 +echo $ECHO_N "checking for egrep... $ECHO_C" >&6 +if test "${ac_cv_prog_egrep+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if echo a | (grep -E '(a|b)') >/dev/null 2>&1 + then ac_cv_prog_egrep='grep -E' + else ac_cv_prog_egrep='egrep' + fi +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 +echo "${ECHO_T}$ac_cv_prog_egrep" >&6 + EGREP=$ac_cv_prog_egrep + + +echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 +if test "${ac_cv_header_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#include +#include + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_header_stdc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_header_stdc=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then + : +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + exit(2); + exit (0); +} +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_header_stdc=no +fi +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi +fi +fi +echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +echo "${ECHO_T}$ac_cv_header_stdc" >&6 +if test $ac_cv_header_stdc = yes; then + +cat >>confdefs.h <<\_ACEOF +#define STDC_HEADERS 1 +_ACEOF + +fi + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. + + + + + + + + + +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default + +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_Header=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_Header=no" +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + + # Any macros that use the compiler (e.g. AC_TRY_COMPILE) have to go here. + + + #------------------------------------------------------------------------ + # If we're using GCC, see if the compiler understands -pipe. If so, use it. + # It makes compiling go faster. (This is only a performance feature.) + #------------------------------------------------------------------------ + + if test -z "$no_pipe" -a -n "$GCC"; then + echo "$as_me:$LINENO: checking if the compiler understands -pipe" >&5 +echo $ECHO_N "checking if the compiler understands -pipe... $ECHO_C" >&6 +if test "${tcl_cv_cc_pipe+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -pipe" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_cc_pipe=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_cc_pipe=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + CFLAGS=$hold_cflags +fi +echo "$as_me:$LINENO: result: $tcl_cv_cc_pipe" >&5 +echo "${ECHO_T}$tcl_cv_cc_pipe" >&6 + if test $tcl_cv_cc_pipe = yes; then + CFLAGS="$CFLAGS -pipe" + fi + fi + + #-------------------------------------------------------------------- + # Common compiler flag setup + #-------------------------------------------------------------------- + + echo "$as_me:$LINENO: checking whether byte ordering is bigendian" >&5 +echo $ECHO_N "checking whether byte ordering is bigendian... $ECHO_C" >&6 +if test "${ac_cv_c_bigendian+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + # See if sys/param.h defines the BYTE_ORDER macro. +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include + +int +main () +{ +#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN + bogus endian macros +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + # It does; now see whether it defined to BIG_ENDIAN or not. +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include + +int +main () +{ +#if BYTE_ORDER != BIG_ENDIAN + not big endian +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_c_bigendian=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_c_bigendian=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +# It does not; compile a test program. +if test "$cross_compiling" = yes; then + # try to guess the endianness by grepping values into an object file + ac_cv_c_bigendian=unknown + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +short ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 }; +short ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 }; +void _ascii () { char *s = (char *) ascii_mm; s = (char *) ascii_ii; } +short ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 }; +short ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 }; +void _ebcdic () { char *s = (char *) ebcdic_mm; s = (char *) ebcdic_ii; } +int +main () +{ + _ascii (); _ebcdic (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + if grep BIGenDianSyS conftest.$ac_objext >/dev/null ; then + ac_cv_c_bigendian=yes +fi +if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then + if test "$ac_cv_c_bigendian" = unknown; then + ac_cv_c_bigendian=no + else + # finding both strings is unlikely to happen, but who knows? + ac_cv_c_bigendian=unknown + fi +fi +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +int +main () +{ + /* Are we little or big endian? From Harbison&Steele. */ + union + { + long l; + char c[sizeof (long)]; + } u; + u.l = 1; + exit (u.c[sizeof (long) - 1] == 1); +} +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_c_bigendian=no +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_c_bigendian=yes +fi +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5 +echo "${ECHO_T}$ac_cv_c_bigendian" >&6 +case $ac_cv_c_bigendian in + yes) + +cat >>confdefs.h <<\_ACEOF +#define WORDS_BIGENDIAN 1 +_ACEOF + ;; + no) + ;; + *) + { { echo "$as_me:$LINENO: error: unknown endianness +presetting ac_cv_c_bigendian=no (or yes) will help" >&5 +echo "$as_me: error: unknown endianness +presetting ac_cv_c_bigendian=no (or yes) will help" >&2;} + { (exit 1); exit 1; }; } ;; +esac + + if test "${TEA_PLATFORM}" = "unix" ; then + + #-------------------------------------------------------------------- + # On a few very rare systems, all of the libm.a stuff is + # already in libc.a. Set compiler flags accordingly. + # Also, Linux requires the "ieee" library for math to work + # right (and it must appear before "-lm"). + #-------------------------------------------------------------------- + + echo "$as_me:$LINENO: checking for sin" >&5 +echo $ECHO_N "checking for sin... $ECHO_C" >&6 +if test "${ac_cv_func_sin+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define sin to an innocuous variant, in case declares sin. + For example, HP-UX 11i declares gettimeofday. */ +#define sin innocuous_sin + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char sin (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef sin + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char sin (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_sin) || defined (__stub___sin) +choke me +#else +char (*f) () = sin; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != sin; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_sin=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_sin=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_sin" >&5 +echo "${ECHO_T}$ac_cv_func_sin" >&6 +if test $ac_cv_func_sin = yes; then + MATH_LIBS="" +else + MATH_LIBS="-lm" +fi + + echo "$as_me:$LINENO: checking for main in -lieee" >&5 +echo $ECHO_N "checking for main in -lieee... $ECHO_C" >&6 +if test "${ac_cv_lib_ieee_main+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lieee $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + + +int +main () +{ +main (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_ieee_main=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_ieee_main=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_ieee_main" >&5 +echo "${ECHO_T}$ac_cv_lib_ieee_main" >&6 +if test $ac_cv_lib_ieee_main = yes; then + MATH_LIBS="-lieee $MATH_LIBS" +fi + + + #-------------------------------------------------------------------- + # Interactive UNIX requires -linet instead of -lsocket, plus it + # needs net/errno.h to define the socket-related error codes. + #-------------------------------------------------------------------- + + echo "$as_me:$LINENO: checking for main in -linet" >&5 +echo $ECHO_N "checking for main in -linet... $ECHO_C" >&6 +if test "${ac_cv_lib_inet_main+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-linet $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + + +int +main () +{ +main (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_inet_main=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_inet_main=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_inet_main" >&5 +echo "${ECHO_T}$ac_cv_lib_inet_main" >&6 +if test $ac_cv_lib_inet_main = yes; then + LIBS="$LIBS -linet" +fi + + if test "${ac_cv_header_net_errno_h+set}" = set; then + echo "$as_me:$LINENO: checking for net/errno.h" >&5 +echo $ECHO_N "checking for net/errno.h... $ECHO_C" >&6 +if test "${ac_cv_header_net_errno_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_net_errno_h" >&5 +echo "${ECHO_T}$ac_cv_header_net_errno_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking net/errno.h usability" >&5 +echo $ECHO_N "checking net/errno.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking net/errno.h presence" >&5 +echo $ECHO_N "checking net/errno.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: net/errno.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: net/errno.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: net/errno.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: net/errno.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: net/errno.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: net/errno.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: net/errno.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: net/errno.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: net/errno.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: net/errno.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: net/errno.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: net/errno.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: net/errno.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: net/errno.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: net/errno.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: net/errno.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## -------------------------------- ## +## Report this to the tkimg lists. ## +## -------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for net/errno.h" >&5 +echo $ECHO_N "checking for net/errno.h... $ECHO_C" >&6 +if test "${ac_cv_header_net_errno_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_net_errno_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_net_errno_h" >&5 +echo "${ECHO_T}$ac_cv_header_net_errno_h" >&6 + +fi +if test $ac_cv_header_net_errno_h = yes; then + + +cat >>confdefs.h <<\_ACEOF +#define HAVE_NET_ERRNO_H 1 +_ACEOF + +fi + + + + #-------------------------------------------------------------------- + # Check for the existence of the -lsocket and -lnsl libraries. + # The order here is important, so that they end up in the right + # order in the command line generated by make. Here are some + # special considerations: + # 1. Use "connect" and "accept" to check for -lsocket, and + # "gethostbyname" to check for -lnsl. + # 2. Use each function name only once: can't redo a check because + # autoconf caches the results of the last check and won't redo it. + # 3. Use -lnsl and -lsocket only if they supply procedures that + # aren't already present in the normal libraries. This is because + # IRIX 5.2 has libraries, but they aren't needed and they're + # bogus: they goof up name resolution if used. + # 4. On some SVR4 systems, can't use -lsocket without -lnsl too. + # To get around this problem, check for both libraries together + # if -lsocket doesn't work by itself. + #-------------------------------------------------------------------- + + tcl_checkBoth=0 + echo "$as_me:$LINENO: checking for connect" >&5 +echo $ECHO_N "checking for connect... $ECHO_C" >&6 +if test "${ac_cv_func_connect+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define connect to an innocuous variant, in case declares connect. + For example, HP-UX 11i declares gettimeofday. */ +#define connect innocuous_connect + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char connect (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef connect + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char connect (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_connect) || defined (__stub___connect) +choke me +#else +char (*f) () = connect; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != connect; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_connect=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_connect=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_connect" >&5 +echo "${ECHO_T}$ac_cv_func_connect" >&6 +if test $ac_cv_func_connect = yes; then + tcl_checkSocket=0 +else + tcl_checkSocket=1 +fi + + if test "$tcl_checkSocket" = 1; then + echo "$as_me:$LINENO: checking for setsockopt" >&5 +echo $ECHO_N "checking for setsockopt... $ECHO_C" >&6 +if test "${ac_cv_func_setsockopt+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define setsockopt to an innocuous variant, in case declares setsockopt. + For example, HP-UX 11i declares gettimeofday. */ +#define setsockopt innocuous_setsockopt + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char setsockopt (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef setsockopt + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char setsockopt (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_setsockopt) || defined (__stub___setsockopt) +choke me +#else +char (*f) () = setsockopt; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != setsockopt; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_setsockopt=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_setsockopt=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_setsockopt" >&5 +echo "${ECHO_T}$ac_cv_func_setsockopt" >&6 +if test $ac_cv_func_setsockopt = yes; then + : +else + echo "$as_me:$LINENO: checking for setsockopt in -lsocket" >&5 +echo $ECHO_N "checking for setsockopt in -lsocket... $ECHO_C" >&6 +if test "${ac_cv_lib_socket_setsockopt+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lsocket $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char setsockopt (); +int +main () +{ +setsockopt (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_socket_setsockopt=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_socket_setsockopt=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_socket_setsockopt" >&5 +echo "${ECHO_T}$ac_cv_lib_socket_setsockopt" >&6 +if test $ac_cv_lib_socket_setsockopt = yes; then + LIBS="$LIBS -lsocket" +else + tcl_checkBoth=1 +fi + +fi + + fi + if test "$tcl_checkBoth" = 1; then + tk_oldLibs=$LIBS + LIBS="$LIBS -lsocket -lnsl" + echo "$as_me:$LINENO: checking for accept" >&5 +echo $ECHO_N "checking for accept... $ECHO_C" >&6 +if test "${ac_cv_func_accept+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define accept to an innocuous variant, in case declares accept. + For example, HP-UX 11i declares gettimeofday. */ +#define accept innocuous_accept + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char accept (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef accept + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char accept (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_accept) || defined (__stub___accept) +choke me +#else +char (*f) () = accept; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != accept; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_accept=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_accept=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_accept" >&5 +echo "${ECHO_T}$ac_cv_func_accept" >&6 +if test $ac_cv_func_accept = yes; then + tcl_checkNsl=0 +else + LIBS=$tk_oldLibs +fi + + fi + echo "$as_me:$LINENO: checking for gethostbyname" >&5 +echo $ECHO_N "checking for gethostbyname... $ECHO_C" >&6 +if test "${ac_cv_func_gethostbyname+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define gethostbyname to an innocuous variant, in case declares gethostbyname. + For example, HP-UX 11i declares gettimeofday. */ +#define gethostbyname innocuous_gethostbyname + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char gethostbyname (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef gethostbyname + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char gethostbyname (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_gethostbyname) || defined (__stub___gethostbyname) +choke me +#else +char (*f) () = gethostbyname; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != gethostbyname; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_gethostbyname=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_gethostbyname=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5 +echo "${ECHO_T}$ac_cv_func_gethostbyname" >&6 +if test $ac_cv_func_gethostbyname = yes; then + : +else + echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5 +echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6 +if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lnsl $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char gethostbyname (); +int +main () +{ +gethostbyname (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_nsl_gethostbyname=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_nsl_gethostbyname=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5 +echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6 +if test $ac_cv_lib_nsl_gethostbyname = yes; then + LIBS="$LIBS -lnsl" +fi + +fi + + + # TEA specific: Don't perform the eval of the libraries here because + # DL_LIBS won't be set until we call TEA_CONFIG_CFLAGS + + TCL_LIBS='${DL_LIBS} ${LIBS} ${MATH_LIBS}' + + + + + echo "$as_me:$LINENO: checking dirent.h" >&5 +echo $ECHO_N "checking dirent.h... $ECHO_C" >&6 +if test "${tcl_cv_dirent_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +int +main () +{ + +#ifndef _POSIX_SOURCE +# ifdef __Lynx__ + /* + * Generate compilation error to make the test fail: Lynx headers + * are only valid if really in the POSIX environment. + */ + + missing_procedure(); +# endif +#endif +DIR *d; +struct dirent *entryPtr; +char *p; +d = opendir("foobar"); +entryPtr = readdir(d); +p = entryPtr->d_name; +closedir(d); + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_dirent_h=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_dirent_h=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $tcl_cv_dirent_h" >&5 +echo "${ECHO_T}$tcl_cv_dirent_h" >&6 + + if test $tcl_cv_dirent_h = no; then + +cat >>confdefs.h <<\_ACEOF +#define NO_DIRENT_H 1 +_ACEOF + + fi + + # TEA specific: + if test "${ac_cv_header_errno_h+set}" = set; then + echo "$as_me:$LINENO: checking for errno.h" >&5 +echo $ECHO_N "checking for errno.h... $ECHO_C" >&6 +if test "${ac_cv_header_errno_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_errno_h" >&5 +echo "${ECHO_T}$ac_cv_header_errno_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking errno.h usability" >&5 +echo $ECHO_N "checking errno.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking errno.h presence" >&5 +echo $ECHO_N "checking errno.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: errno.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: errno.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: errno.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: errno.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: errno.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: errno.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: errno.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: errno.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: errno.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: errno.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: errno.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: errno.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: errno.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: errno.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: errno.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: errno.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## -------------------------------- ## +## Report this to the tkimg lists. ## +## -------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for errno.h" >&5 +echo $ECHO_N "checking for errno.h... $ECHO_C" >&6 +if test "${ac_cv_header_errno_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_errno_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_errno_h" >&5 +echo "${ECHO_T}$ac_cv_header_errno_h" >&6 + +fi +if test $ac_cv_header_errno_h = yes; then + : +else + +cat >>confdefs.h <<\_ACEOF +#define NO_ERRNO_H 1 +_ACEOF + +fi + + + if test "${ac_cv_header_float_h+set}" = set; then + echo "$as_me:$LINENO: checking for float.h" >&5 +echo $ECHO_N "checking for float.h... $ECHO_C" >&6 +if test "${ac_cv_header_float_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_float_h" >&5 +echo "${ECHO_T}$ac_cv_header_float_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking float.h usability" >&5 +echo $ECHO_N "checking float.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking float.h presence" >&5 +echo $ECHO_N "checking float.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: float.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: float.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: float.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: float.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: float.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: float.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: float.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: float.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: float.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: float.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: float.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: float.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: float.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: float.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: float.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: float.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## -------------------------------- ## +## Report this to the tkimg lists. ## +## -------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for float.h" >&5 +echo $ECHO_N "checking for float.h... $ECHO_C" >&6 +if test "${ac_cv_header_float_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_float_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_float_h" >&5 +echo "${ECHO_T}$ac_cv_header_float_h" >&6 + +fi +if test $ac_cv_header_float_h = yes; then + : +else + +cat >>confdefs.h <<\_ACEOF +#define NO_FLOAT_H 1 +_ACEOF + +fi + + + if test "${ac_cv_header_values_h+set}" = set; then + echo "$as_me:$LINENO: checking for values.h" >&5 +echo $ECHO_N "checking for values.h... $ECHO_C" >&6 +if test "${ac_cv_header_values_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_values_h" >&5 +echo "${ECHO_T}$ac_cv_header_values_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking values.h usability" >&5 +echo $ECHO_N "checking values.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking values.h presence" >&5 +echo $ECHO_N "checking values.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: values.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: values.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: values.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: values.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: values.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: values.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: values.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: values.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: values.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: values.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: values.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: values.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: values.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: values.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: values.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: values.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## -------------------------------- ## +## Report this to the tkimg lists. ## +## -------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for values.h" >&5 +echo $ECHO_N "checking for values.h... $ECHO_C" >&6 +if test "${ac_cv_header_values_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_values_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_values_h" >&5 +echo "${ECHO_T}$ac_cv_header_values_h" >&6 + +fi +if test $ac_cv_header_values_h = yes; then + : +else + +cat >>confdefs.h <<\_ACEOF +#define NO_VALUES_H 1 +_ACEOF + +fi + + + if test "${ac_cv_header_limits_h+set}" = set; then + echo "$as_me:$LINENO: checking for limits.h" >&5 +echo $ECHO_N "checking for limits.h... $ECHO_C" >&6 +if test "${ac_cv_header_limits_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_limits_h" >&5 +echo "${ECHO_T}$ac_cv_header_limits_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking limits.h usability" >&5 +echo $ECHO_N "checking limits.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking limits.h presence" >&5 +echo $ECHO_N "checking limits.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: limits.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: limits.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: limits.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: limits.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: limits.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: limits.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: limits.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: limits.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: limits.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: limits.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: limits.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: limits.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: limits.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: limits.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: limits.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: limits.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## -------------------------------- ## +## Report this to the tkimg lists. ## +## -------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for limits.h" >&5 +echo $ECHO_N "checking for limits.h... $ECHO_C" >&6 +if test "${ac_cv_header_limits_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_limits_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_limits_h" >&5 +echo "${ECHO_T}$ac_cv_header_limits_h" >&6 + +fi +if test $ac_cv_header_limits_h = yes; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_LIMITS_H 1 +_ACEOF + +else + +cat >>confdefs.h <<\_ACEOF +#define NO_LIMITS_H 1 +_ACEOF + +fi + + + if test "${ac_cv_header_stdlib_h+set}" = set; then + echo "$as_me:$LINENO: checking for stdlib.h" >&5 +echo $ECHO_N "checking for stdlib.h... $ECHO_C" >&6 +if test "${ac_cv_header_stdlib_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_stdlib_h" >&5 +echo "${ECHO_T}$ac_cv_header_stdlib_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking stdlib.h usability" >&5 +echo $ECHO_N "checking stdlib.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking stdlib.h presence" >&5 +echo $ECHO_N "checking stdlib.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: stdlib.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: stdlib.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: stdlib.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: stdlib.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: stdlib.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: stdlib.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: stdlib.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: stdlib.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: stdlib.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: stdlib.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: stdlib.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: stdlib.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: stdlib.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: stdlib.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: stdlib.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: stdlib.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## -------------------------------- ## +## Report this to the tkimg lists. ## +## -------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for stdlib.h" >&5 +echo $ECHO_N "checking for stdlib.h... $ECHO_C" >&6 +if test "${ac_cv_header_stdlib_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_stdlib_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_stdlib_h" >&5 +echo "${ECHO_T}$ac_cv_header_stdlib_h" >&6 + +fi +if test $ac_cv_header_stdlib_h = yes; then + tcl_ok=1 +else + tcl_ok=0 +fi + + + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "strtol" >/dev/null 2>&1; then + : +else + tcl_ok=0 +fi +rm -f conftest* + + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "strtoul" >/dev/null 2>&1; then + : +else + tcl_ok=0 +fi +rm -f conftest* + + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "strtod" >/dev/null 2>&1; then + : +else + tcl_ok=0 +fi +rm -f conftest* + + if test $tcl_ok = 0; then + +cat >>confdefs.h <<\_ACEOF +#define NO_STDLIB_H 1 +_ACEOF + + fi + if test "${ac_cv_header_string_h+set}" = set; then + echo "$as_me:$LINENO: checking for string.h" >&5 +echo $ECHO_N "checking for string.h... $ECHO_C" >&6 +if test "${ac_cv_header_string_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_string_h" >&5 +echo "${ECHO_T}$ac_cv_header_string_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking string.h usability" >&5 +echo $ECHO_N "checking string.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking string.h presence" >&5 +echo $ECHO_N "checking string.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: string.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: string.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: string.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: string.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: string.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: string.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: string.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: string.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: string.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: string.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: string.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: string.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: string.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: string.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: string.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: string.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## -------------------------------- ## +## Report this to the tkimg lists. ## +## -------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for string.h" >&5 +echo $ECHO_N "checking for string.h... $ECHO_C" >&6 +if test "${ac_cv_header_string_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_string_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_string_h" >&5 +echo "${ECHO_T}$ac_cv_header_string_h" >&6 + +fi +if test $ac_cv_header_string_h = yes; then + tcl_ok=1 +else + tcl_ok=0 +fi + + + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "strstr" >/dev/null 2>&1; then + : +else + tcl_ok=0 +fi +rm -f conftest* + + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "strerror" >/dev/null 2>&1; then + : +else + tcl_ok=0 +fi +rm -f conftest* + + + # See also memmove check below for a place where NO_STRING_H can be + # set and why. + + if test $tcl_ok = 0; then + +cat >>confdefs.h <<\_ACEOF +#define NO_STRING_H 1 +_ACEOF + + fi + + if test "${ac_cv_header_sys_wait_h+set}" = set; then + echo "$as_me:$LINENO: checking for sys/wait.h" >&5 +echo $ECHO_N "checking for sys/wait.h... $ECHO_C" >&6 +if test "${ac_cv_header_sys_wait_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_sys_wait_h" >&5 +echo "${ECHO_T}$ac_cv_header_sys_wait_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking sys/wait.h usability" >&5 +echo $ECHO_N "checking sys/wait.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking sys/wait.h presence" >&5 +echo $ECHO_N "checking sys/wait.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: sys/wait.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: sys/wait.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/wait.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: sys/wait.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: sys/wait.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: sys/wait.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/wait.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: sys/wait.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/wait.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: sys/wait.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/wait.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: sys/wait.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/wait.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: sys/wait.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/wait.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: sys/wait.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## -------------------------------- ## +## Report this to the tkimg lists. ## +## -------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for sys/wait.h" >&5 +echo $ECHO_N "checking for sys/wait.h... $ECHO_C" >&6 +if test "${ac_cv_header_sys_wait_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_sys_wait_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_sys_wait_h" >&5 +echo "${ECHO_T}$ac_cv_header_sys_wait_h" >&6 + +fi +if test $ac_cv_header_sys_wait_h = yes; then + : +else + +cat >>confdefs.h <<\_ACEOF +#define NO_SYS_WAIT_H 1 +_ACEOF + +fi + + + if test "${ac_cv_header_dlfcn_h+set}" = set; then + echo "$as_me:$LINENO: checking for dlfcn.h" >&5 +echo $ECHO_N "checking for dlfcn.h... $ECHO_C" >&6 +if test "${ac_cv_header_dlfcn_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_dlfcn_h" >&5 +echo "${ECHO_T}$ac_cv_header_dlfcn_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking dlfcn.h usability" >&5 +echo $ECHO_N "checking dlfcn.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking dlfcn.h presence" >&5 +echo $ECHO_N "checking dlfcn.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: dlfcn.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: dlfcn.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: dlfcn.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: dlfcn.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: dlfcn.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: dlfcn.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: dlfcn.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: dlfcn.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: dlfcn.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: dlfcn.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: dlfcn.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: dlfcn.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: dlfcn.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: dlfcn.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: dlfcn.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: dlfcn.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## -------------------------------- ## +## Report this to the tkimg lists. ## +## -------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for dlfcn.h" >&5 +echo $ECHO_N "checking for dlfcn.h... $ECHO_C" >&6 +if test "${ac_cv_header_dlfcn_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_dlfcn_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_dlfcn_h" >&5 +echo "${ECHO_T}$ac_cv_header_dlfcn_h" >&6 + +fi +if test $ac_cv_header_dlfcn_h = yes; then + : +else + +cat >>confdefs.h <<\_ACEOF +#define NO_DLFCN_H 1 +_ACEOF + +fi + + + + # OS/390 lacks sys/param.h (and doesn't need it, by chance). + +for ac_header in sys/param.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <$ac_header> +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## -------------------------------- ## +## Report this to the tkimg lists. ## +## -------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + eval "$as_ac_Header=\$ac_header_preproc" +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 + +fi +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + # Let the user call this, because if it triggers, they will + # need a compat/strtod.c that is correct. Users can also + # use Tcl_GetDouble(FromObj) instead. + #TEA_BUGGY_STRTOD + fi + + +#----------------------------------------------------------------------- +# Specify the C source files to compile in TEA_ADD_SOURCES, +# public headers that need to be installed in TEA_ADD_HEADERS, +# stub library C source files to compile in TEA_ADD_STUB_SOURCES, +# and runtime Tcl library files in TEA_ADD_TCL_SOURCES. +# This defines PKG(_STUB)_SOURCES, PKG(_STUB)_OBJECTS, PKG_HEADERS +# and PKG_TCL_SOURCES. +#----------------------------------------------------------------------- + + + vars="tkimg.c tkimgIO.c tkimgPPB.c tkimgUtils.c tkimgStubInit.c" + for i in $vars; do + case $i in + \$*) + # allow $-var names + PKG_SOURCES="$PKG_SOURCES $i" + PKG_OBJECTS="$PKG_OBJECTS $i" + ;; + *) + # check for existence - allows for generic/win/unix VPATH + # To add more dirs here (like 'src'), you have to update VPATH + # in Makefile.in as well + if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ + -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ + -a ! -f "${srcdir}/macosx/$i" \ + ; then + { { echo "$as_me:$LINENO: error: could not find source file '$i'" >&5 +echo "$as_me: error: could not find source file '$i'" >&2;} + { (exit 1); exit 1; }; } + fi + PKG_SOURCES="$PKG_SOURCES $i" + # this assumes it is in a VPATH dir + i=`basename $i` + # handle user calling this before or after TEA_SETUP_COMPILER + if test x"${OBJEXT}" != x ; then + j="`echo $i | sed -e 's/\.[^.]*$//'`.${OBJEXT}" + else + j="`echo $i | sed -e 's/\.[^.]*$//'`.\${OBJEXT}" + fi + PKG_OBJECTS="$PKG_OBJECTS $j" + ;; + esac + done + + + + + vars="tkimg.h tkimgDecls.h" + for i in $vars; do + # check for existence, be strict because it is installed + if test ! -f "${srcdir}/$i" ; then + { { echo "$as_me:$LINENO: error: could not find header file '${srcdir}/$i'" >&5 +echo "$as_me: error: could not find header file '${srcdir}/$i'" >&2;} + { (exit 1); exit 1; }; } + fi + PKG_HEADERS="$PKG_HEADERS $i" + done + + + + vars="" + for i in $vars; do + PKG_INCLUDES="$PKG_INCLUDES $i" + done + + + + vars="" + for i in $vars; do + if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then + # Convert foo.lib to -lfoo for GCC. No-op if not *.lib + i=`echo "$i" | sed -e 's/^\([^-].*\)\.lib$/-l\1/i'` + fi + PKG_LIBS="$PKG_LIBS $i" + done + + + + PKG_CFLAGS="$PKG_CFLAGS " + + + + vars="tkimgStubLib.c" + for i in $vars; do + # check for existence - allows for generic/win/unix VPATH + if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ + -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ + -a ! -f "${srcdir}/macosx/$i" \ + ; then + { { echo "$as_me:$LINENO: error: could not find stub source file '$i'" >&5 +echo "$as_me: error: could not find stub source file '$i'" >&2;} + { (exit 1); exit 1; }; } + fi + PKG_STUB_SOURCES="$PKG_STUB_SOURCES $i" + # this assumes it is in a VPATH dir + i=`basename $i` + # handle user calling this before or after TEA_SETUP_COMPILER + if test x"${OBJEXT}" != x ; then + j="`echo $i | sed -e 's/\.[^.]*$//'`.${OBJEXT}" + else + j="`echo $i | sed -e 's/\.[^.]*$//'`.\${OBJEXT}" + fi + PKG_STUB_OBJECTS="$PKG_STUB_OBJECTS $j" + done + + + + + vars="tkimgStubLib.c" + for i in $vars; do + case $i in + \$*) + # allow $-var names + PKG_SOURCES="$PKG_SOURCES $i" + PKG_OBJECTS="$PKG_OBJECTS $i" + ;; + *) + # check for existence - allows for generic/win/unix VPATH + # To add more dirs here (like 'src'), you have to update VPATH + # in Makefile.in as well + if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ + -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ + -a ! -f "${srcdir}/macosx/$i" \ + ; then + { { echo "$as_me:$LINENO: error: could not find source file '$i'" >&5 +echo "$as_me: error: could not find source file '$i'" >&2;} + { (exit 1); exit 1; }; } + fi + PKG_SOURCES="$PKG_SOURCES $i" + # this assumes it is in a VPATH dir + i=`basename $i` + # handle user calling this before or after TEA_SETUP_COMPILER + if test x"${OBJEXT}" != x ; then + j="`echo $i | sed -e 's/\.[^.]*$//'`.${OBJEXT}" + else + j="`echo $i | sed -e 's/\.[^.]*$//'`.\${OBJEXT}" + fi + PKG_OBJECTS="$PKG_OBJECTS $j" + ;; + esac + done + + + + + vars="" + for i in $vars; do + # check for existence, be strict because it is installed + if test ! -f "${srcdir}/$i" ; then + { { echo "$as_me:$LINENO: error: could not find tcl source file '${srcdir}/$i'" >&5 +echo "$as_me: error: could not find tcl source file '${srcdir}/$i'" >&2;} + { (exit 1); exit 1; }; } + fi + PKG_TCL_SOURCES="$PKG_TCL_SOURCES $i" + done + + + +#-------------------------------------------------------------------- +# __CHANGE__ +# Choose which headers you need. Extension authors should try very +# hard to only rely on the Tcl public header files. Internal headers +# contain private data structures and are subject to change without +# notice. +# This MUST be called after TEA_LOAD_TCLCONFIG / TEA_LOAD_TKCONFIG +#-------------------------------------------------------------------- + + + echo "$as_me:$LINENO: checking for Tcl public headers" >&5 +echo $ECHO_N "checking for Tcl public headers... $ECHO_C" >&6 + + +# Check whether --with-tclinclude or --without-tclinclude was given. +if test "${with_tclinclude+set}" = set; then + withval="$with_tclinclude" + with_tclinclude=${withval} +fi; + + if test "${ac_cv_c_tclh+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + # Use the value from --with-tclinclude, if it was given + + if test x"${with_tclinclude}" != x ; then + if test -f "${with_tclinclude}/tcl.h" ; then + ac_cv_c_tclh=${with_tclinclude} + else + { { echo "$as_me:$LINENO: error: ${with_tclinclude} directory does not contain tcl.h" >&5 +echo "$as_me: error: ${with_tclinclude} directory does not contain tcl.h" >&2;} + { (exit 1); exit 1; }; } + fi + else + list="" + if test "`uname -s`" = "Darwin"; then + # If Tcl was built as a framework, attempt to use + # the framework's Headers directory + case ${TCL_DEFS} in + *TCL_FRAMEWORK*) + list="`ls -d ${TCL_BIN_DIR}/Headers 2>/dev/null`" + ;; + esac + fi + + # Look in the source dir only if Tcl is not installed, + # and in that situation, look there before installed locations. + if test -f "${TCL_BIN_DIR}/Makefile" ; then + list="$list `ls -d ${TCL_SRC_DIR}/generic 2>/dev/null`" + fi + + # Check order: pkg --prefix location, Tcl's --prefix location, + # relative to directory of tclConfig.sh. + + eval "temp_includedir=${includedir}" + list="$list \ + `ls -d ${temp_includedir} 2>/dev/null` \ + `ls -d ${TCL_PREFIX}/include 2>/dev/null` \ + `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null`" + if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then + list="$list /usr/local/include /usr/include" + if test x"${TCL_INCLUDE_SPEC}" != x ; then + d=`echo "${TCL_INCLUDE_SPEC}" | sed -e 's/^-I//'` + list="$list `ls -d ${d} 2>/dev/null`" + fi + fi + for i in $list ; do + if test -f "$i/tcl.h" ; then + ac_cv_c_tclh=$i + break + fi + done + fi + +fi + + + # Print a message based on how we determined the include path + + if test x"${ac_cv_c_tclh}" = x ; then + { { echo "$as_me:$LINENO: error: tcl.h not found. Please specify its location with --with-tclinclude" >&5 +echo "$as_me: error: tcl.h not found. Please specify its location with --with-tclinclude" >&2;} + { (exit 1); exit 1; }; } + else + echo "$as_me:$LINENO: result: ${ac_cv_c_tclh}" >&5 +echo "${ECHO_T}${ac_cv_c_tclh}" >&6 + fi + + # Convert to a native path and substitute into the output files. + + INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tclh}` + + TCL_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" + + + + + echo "$as_me:$LINENO: checking for Tk public headers" >&5 +echo $ECHO_N "checking for Tk public headers... $ECHO_C" >&6 + + +# Check whether --with-tkinclude or --without-tkinclude was given. +if test "${with_tkinclude+set}" = set; then + withval="$with_tkinclude" + with_tkinclude=${withval} +fi; + + if test "${ac_cv_c_tkh+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + # Use the value from --with-tkinclude, if it was given + + if test x"${with_tkinclude}" != x ; then + if test -f "${with_tkinclude}/tk.h" ; then + ac_cv_c_tkh=${with_tkinclude} + else + { { echo "$as_me:$LINENO: error: ${with_tkinclude} directory does not contain tk.h" >&5 +echo "$as_me: error: ${with_tkinclude} directory does not contain tk.h" >&2;} + { (exit 1); exit 1; }; } + fi + else + list="" + if test "`uname -s`" = "Darwin"; then + # If Tk was built as a framework, attempt to use + # the framework's Headers directory. + case ${TK_DEFS} in + *TK_FRAMEWORK*) + list="`ls -d ${TK_BIN_DIR}/Headers 2>/dev/null`" + ;; + esac + fi + + # Look in the source dir only if Tk is not installed, + # and in that situation, look there before installed locations. + if test -f "${TK_BIN_DIR}/Makefile" ; then + list="$list `ls -d ${TK_SRC_DIR}/generic 2>/dev/null`" + fi + + # Check order: pkg --prefix location, Tk's --prefix location, + # relative to directory of tkConfig.sh, Tcl's --prefix location, + # relative to directory of tclConfig.sh. + + eval "temp_includedir=${includedir}" + list="$list \ + `ls -d ${temp_includedir} 2>/dev/null` \ + `ls -d ${TK_PREFIX}/include 2>/dev/null` \ + `ls -d ${TK_BIN_DIR}/../include 2>/dev/null` \ + `ls -d ${TCL_PREFIX}/include 2>/dev/null` \ + `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null`" + if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then + list="$list /usr/local/include /usr/include" + if test x"${TK_INCLUDE_SPEC}" != x ; then + d=`echo "${TK_INCLUDE_SPEC}" | sed -e 's/^-I//'` + list="$list `ls -d ${d} 2>/dev/null`" + fi + fi + for i in $list ; do + if test -f "$i/tk.h" ; then + ac_cv_c_tkh=$i + break + fi + done + fi + +fi + + + # Print a message based on how we determined the include path + + if test x"${ac_cv_c_tkh}" = x ; then + { { echo "$as_me:$LINENO: error: tk.h not found. Please specify its location with --with-tkinclude" >&5 +echo "$as_me: error: tk.h not found. Please specify its location with --with-tkinclude" >&2;} + { (exit 1); exit 1; }; } + else + echo "$as_me:$LINENO: result: ${ac_cv_c_tkh}" >&5 +echo "${ECHO_T}${ac_cv_c_tkh}" >&6 + fi + + # Convert to a native path and substitute into the output files. + + INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tkh}` + + TK_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" + + + + if test "${TEA_WINDOWINGSYSTEM}" != "x11"; then + # On Windows and Aqua, we need the X compat headers + echo "$as_me:$LINENO: checking for X11 header files" >&5 +echo $ECHO_N "checking for X11 header files... $ECHO_C" >&6 + if test ! -r "${INCLUDE_DIR_NATIVE}/X11/Xlib.h"; then + INCLUDE_DIR_NATIVE="`${CYGPATH} ${TK_SRC_DIR}/xlib`" + TK_XINCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" + + fi + echo "$as_me:$LINENO: result: ${INCLUDE_DIR_NATIVE}" >&5 +echo "${ECHO_T}${INCLUDE_DIR_NATIVE}" >&6 + fi + + +#-------------------------------------------------------------------- +# A few miscellaneous platform-specific items: +# +# Windows creates a few extra files that need to be cleaned up. +# We can add more files to clean if our extension creates any extra +# files in the future. +# +# Define any extra compiler flags in the PACKAGE_CFLAGS variable. +# These will be appended to the current set of compiler flags for +# your system. +#-------------------------------------------------------------------- + +if test "${TEA_PLATFORM}" = "windows" ; then + CLEANFILES="*.lib *.dll *.exp *.ilk *.pdb vc*.pch" +else + CLEANFILES="" +fi + + +#-------------------------------------------------------------------- +# Check whether --enable-threads or --disable-threads was given. +# So far only Tcl responds to this one. +#-------------------------------------------------------------------- + + + # Check whether --enable-threads or --disable-threads was given. +if test "${enable_threads+set}" = set; then + enableval="$enable_threads" + tcl_ok=$enableval +else + tcl_ok=yes +fi; + + if test "${enable_threads+set}" = set; then + enableval="$enable_threads" + tcl_ok=$enableval + else + tcl_ok=yes + fi + + if test "$tcl_ok" = "yes" -o "${TCL_THREADS}" = 1; then + TCL_THREADS=1 + + if test "${TEA_PLATFORM}" != "windows" ; then + # We are always OK on Windows, so check what this platform wants: + + # USE_THREAD_ALLOC tells us to try the special thread-based + # allocator that significantly reduces lock contention + +cat >>confdefs.h <<\_ACEOF +#define USE_THREAD_ALLOC 1 +_ACEOF + + +cat >>confdefs.h <<\_ACEOF +#define _REENTRANT 1 +_ACEOF + + if test "`uname -s`" = "SunOS" ; then + +cat >>confdefs.h <<\_ACEOF +#define _POSIX_PTHREAD_SEMANTICS 1 +_ACEOF + + fi + +cat >>confdefs.h <<\_ACEOF +#define _THREAD_SAFE 1 +_ACEOF + + echo "$as_me:$LINENO: checking for pthread_mutex_init in -lpthread" >&5 +echo $ECHO_N "checking for pthread_mutex_init in -lpthread... $ECHO_C" >&6 +if test "${ac_cv_lib_pthread_pthread_mutex_init+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lpthread $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char pthread_mutex_init (); +int +main () +{ +pthread_mutex_init (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_pthread_pthread_mutex_init=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_pthread_pthread_mutex_init=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_pthread_pthread_mutex_init" >&5 +echo "${ECHO_T}$ac_cv_lib_pthread_pthread_mutex_init" >&6 +if test $ac_cv_lib_pthread_pthread_mutex_init = yes; then + tcl_ok=yes +else + tcl_ok=no +fi + + if test "$tcl_ok" = "no"; then + # Check a little harder for __pthread_mutex_init in the same + # library, as some systems hide it there until pthread.h is + # defined. We could alternatively do an AC_TRY_COMPILE with + # pthread.h, but that will work with libpthread really doesn't + # exist, like AIX 4.2. [Bug: 4359] + echo "$as_me:$LINENO: checking for __pthread_mutex_init in -lpthread" >&5 +echo $ECHO_N "checking for __pthread_mutex_init in -lpthread... $ECHO_C" >&6 +if test "${ac_cv_lib_pthread___pthread_mutex_init+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lpthread $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char __pthread_mutex_init (); +int +main () +{ +__pthread_mutex_init (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_pthread___pthread_mutex_init=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_pthread___pthread_mutex_init=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_pthread___pthread_mutex_init" >&5 +echo "${ECHO_T}$ac_cv_lib_pthread___pthread_mutex_init" >&6 +if test $ac_cv_lib_pthread___pthread_mutex_init = yes; then + tcl_ok=yes +else + tcl_ok=no +fi + + fi + + if test "$tcl_ok" = "yes"; then + # The space is needed + THREADS_LIBS=" -lpthread" + else + echo "$as_me:$LINENO: checking for pthread_mutex_init in -lpthreads" >&5 +echo $ECHO_N "checking for pthread_mutex_init in -lpthreads... $ECHO_C" >&6 +if test "${ac_cv_lib_pthreads_pthread_mutex_init+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lpthreads $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char pthread_mutex_init (); +int +main () +{ +pthread_mutex_init (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_pthreads_pthread_mutex_init=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_pthreads_pthread_mutex_init=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_pthreads_pthread_mutex_init" >&5 +echo "${ECHO_T}$ac_cv_lib_pthreads_pthread_mutex_init" >&6 +if test $ac_cv_lib_pthreads_pthread_mutex_init = yes; then + tcl_ok=yes +else + tcl_ok=no +fi + + if test "$tcl_ok" = "yes"; then + # The space is needed + THREADS_LIBS=" -lpthreads" + else + echo "$as_me:$LINENO: checking for pthread_mutex_init in -lc" >&5 +echo $ECHO_N "checking for pthread_mutex_init in -lc... $ECHO_C" >&6 +if test "${ac_cv_lib_c_pthread_mutex_init+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lc $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char pthread_mutex_init (); +int +main () +{ +pthread_mutex_init (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_c_pthread_mutex_init=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_c_pthread_mutex_init=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_c_pthread_mutex_init" >&5 +echo "${ECHO_T}$ac_cv_lib_c_pthread_mutex_init" >&6 +if test $ac_cv_lib_c_pthread_mutex_init = yes; then + tcl_ok=yes +else + tcl_ok=no +fi + + if test "$tcl_ok" = "no"; then + echo "$as_me:$LINENO: checking for pthread_mutex_init in -lc_r" >&5 +echo $ECHO_N "checking for pthread_mutex_init in -lc_r... $ECHO_C" >&6 +if test "${ac_cv_lib_c_r_pthread_mutex_init+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lc_r $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char pthread_mutex_init (); +int +main () +{ +pthread_mutex_init (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_c_r_pthread_mutex_init=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_c_r_pthread_mutex_init=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_c_r_pthread_mutex_init" >&5 +echo "${ECHO_T}$ac_cv_lib_c_r_pthread_mutex_init" >&6 +if test $ac_cv_lib_c_r_pthread_mutex_init = yes; then + tcl_ok=yes +else + tcl_ok=no +fi + + if test "$tcl_ok" = "yes"; then + # The space is needed + THREADS_LIBS=" -pthread" + else + TCL_THREADS=0 + { echo "$as_me:$LINENO: WARNING: Do not know how to find pthread lib on your system - thread support disabled" >&5 +echo "$as_me: WARNING: Do not know how to find pthread lib on your system - thread support disabled" >&2;} + fi + fi + fi + fi + fi + else + TCL_THREADS=0 + fi + # Do checking message here to not mess up interleaved configure output + echo "$as_me:$LINENO: checking for building with threads" >&5 +echo $ECHO_N "checking for building with threads... $ECHO_C" >&6 + if test "${TCL_THREADS}" = 1; then + +cat >>confdefs.h <<\_ACEOF +#define TCL_THREADS 1 +_ACEOF + + echo "$as_me:$LINENO: result: yes (default)" >&5 +echo "${ECHO_T}yes (default)" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 + fi + # TCL_THREADS sanity checking. See if our request for building with + # threads is the same as the way Tcl was built. If not, warn the user. + case ${TCL_DEFS} in + *THREADS=1*) + if test "${TCL_THREADS}" = "0"; then + { echo "$as_me:$LINENO: WARNING: + Building ${PACKAGE_NAME} without threads enabled, but building against Tcl + that IS thread-enabled. It is recommended to use --enable-threads." >&5 +echo "$as_me: WARNING: + Building ${PACKAGE_NAME} without threads enabled, but building against Tcl + that IS thread-enabled. It is recommended to use --enable-threads." >&2;} + fi + ;; + *) + if test "${TCL_THREADS}" = "1"; then + { echo "$as_me:$LINENO: WARNING: + --enable-threads requested, but building against a Tcl that is NOT + thread-enabled. This is an OK configuration that will also run in + a thread-enabled core." >&5 +echo "$as_me: WARNING: + --enable-threads requested, but building against a Tcl that is NOT + thread-enabled. This is an OK configuration that will also run in + a thread-enabled core." >&2;} + fi + ;; + esac + + + +#-------------------------------------------------------------------- +# The statement below defines a collection of symbols related to +# building as a shared library instead of a static library. +#-------------------------------------------------------------------- + + + echo "$as_me:$LINENO: checking how to build libraries" >&5 +echo $ECHO_N "checking how to build libraries... $ECHO_C" >&6 + # Check whether --enable-shared or --disable-shared was given. +if test "${enable_shared+set}" = set; then + enableval="$enable_shared" + tcl_ok=$enableval +else + tcl_ok=yes +fi; + + if test "${enable_shared+set}" = set; then + enableval="$enable_shared" + tcl_ok=$enableval + else + tcl_ok=yes + fi + + if test "$tcl_ok" = "yes" ; then + echo "$as_me:$LINENO: result: shared" >&5 +echo "${ECHO_T}shared" >&6 + SHARED_BUILD=1 + else + echo "$as_me:$LINENO: result: static" >&5 +echo "${ECHO_T}static" >&6 + SHARED_BUILD=0 + +cat >>confdefs.h <<\_ACEOF +#define STATIC_BUILD 1 +_ACEOF + + fi + + + +#-------------------------------------------------------------------- +# This macro figures out what flags to use with the compiler/linker +# when building shared/static debug/optimized objects. This information +# can be taken from the tclConfig.sh file, but this figures it all out. +#-------------------------------------------------------------------- + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + echo "$as_me:$LINENO: result: $RANLIB" >&5 +echo "${ECHO_T}$RANLIB" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 +echo "${ECHO_T}$ac_ct_RANLIB" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + RANLIB=$ac_ct_RANLIB +else + RANLIB="$ac_cv_prog_RANLIB" +fi + + + + + # Step 0.a: Enable 64 bit support? + + echo "$as_me:$LINENO: checking if 64bit support is requested" >&5 +echo $ECHO_N "checking if 64bit support is requested... $ECHO_C" >&6 + # Check whether --enable-64bit or --disable-64bit was given. +if test "${enable_64bit+set}" = set; then + enableval="$enable_64bit" + do64bit=$enableval +else + do64bit=no +fi; + echo "$as_me:$LINENO: result: $do64bit" >&5 +echo "${ECHO_T}$do64bit" >&6 + + # Step 0.b: Enable Solaris 64 bit VIS support? + + echo "$as_me:$LINENO: checking if 64bit Sparc VIS support is requested" >&5 +echo $ECHO_N "checking if 64bit Sparc VIS support is requested... $ECHO_C" >&6 + # Check whether --enable-64bit-vis or --disable-64bit-vis was given. +if test "${enable_64bit_vis+set}" = set; then + enableval="$enable_64bit_vis" + do64bitVIS=$enableval +else + do64bitVIS=no +fi; + echo "$as_me:$LINENO: result: $do64bitVIS" >&5 +echo "${ECHO_T}$do64bitVIS" >&6 + # Force 64bit on with VIS + if test "$do64bitVIS" = "yes"; then + do64bit=yes +fi + + + # Step 0.c: Check if visibility support is available. Do this here so + # that platform specific alternatives can be used below if this fails. + + echo "$as_me:$LINENO: checking if compiler supports visibility \"hidden\"" >&5 +echo $ECHO_N "checking if compiler supports visibility \"hidden\"... $ECHO_C" >&6 +if test "${tcl_cv_cc_visibility_hidden+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -Werror" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + + extern __attribute__((__visibility__("hidden"))) void f(void); + void f(void) {} +int +main () +{ +f(); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_cc_visibility_hidden=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_cc_visibility_hidden=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + CFLAGS=$hold_cflags +fi +echo "$as_me:$LINENO: result: $tcl_cv_cc_visibility_hidden" >&5 +echo "${ECHO_T}$tcl_cv_cc_visibility_hidden" >&6 + if test $tcl_cv_cc_visibility_hidden = yes; then + + +cat >>confdefs.h <<\_ACEOF +#define MODULE_SCOPE extern __attribute__((__visibility__("hidden"))) +_ACEOF + + +cat >>confdefs.h <<\_ACEOF +#define HAVE_HIDDEN 1 +_ACEOF + + +fi + + + # Step 0.d: Disable -rpath support? + + echo "$as_me:$LINENO: checking if rpath support is requested" >&5 +echo $ECHO_N "checking if rpath support is requested... $ECHO_C" >&6 + # Check whether --enable-rpath or --disable-rpath was given. +if test "${enable_rpath+set}" = set; then + enableval="$enable_rpath" + doRpath=$enableval +else + doRpath=yes +fi; + echo "$as_me:$LINENO: result: $doRpath" >&5 +echo "${ECHO_T}$doRpath" >&6 + + # TEA specific: Cross-compiling options for Windows/CE builds? + + if test "${TEA_PLATFORM}" = windows; then + + echo "$as_me:$LINENO: checking if Windows/CE build is requested" >&5 +echo $ECHO_N "checking if Windows/CE build is requested... $ECHO_C" >&6 + # Check whether --enable-wince or --disable-wince was given. +if test "${enable_wince+set}" = set; then + enableval="$enable_wince" + doWince=$enableval +else + doWince=no +fi; + echo "$as_me:$LINENO: result: $doWince" >&5 +echo "${ECHO_T}$doWince" >&6 + +fi + + + # Set the variable "system" to hold the name and version number + # for the system. + + + echo "$as_me:$LINENO: checking system version" >&5 +echo $ECHO_N "checking system version... $ECHO_C" >&6 +if test "${tcl_cv_sys_version+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + # TEA specific: + if test "${TEA_PLATFORM}" = "windows" ; then + tcl_cv_sys_version=windows + else + tcl_cv_sys_version=`uname -s`-`uname -r` + if test "$?" -ne 0 ; then + { echo "$as_me:$LINENO: WARNING: can't find uname command" >&5 +echo "$as_me: WARNING: can't find uname command" >&2;} + tcl_cv_sys_version=unknown + else + if test "`uname -s`" = "AIX" ; then + tcl_cv_sys_version=AIX-`uname -v`.`uname -r` + fi + fi + fi + +fi +echo "$as_me:$LINENO: result: $tcl_cv_sys_version" >&5 +echo "${ECHO_T}$tcl_cv_sys_version" >&6 + system=$tcl_cv_sys_version + + + # Require ranlib early so we can override it in special cases below. + + + + # Set configuration options based on system name and version. + # This is similar to Tcl's unix/tcl.m4 except that we've added a + # "windows" case and removed some core-only vars. + + do64bit_ok=no + # default to '{$LIBS}' and set to "" on per-platform necessary basis + SHLIB_LD_LIBS='${LIBS}' + # When ld needs options to work in 64-bit mode, put them in + # LDFLAGS_ARCH so they eventually end up in LDFLAGS even if [load] + # is disabled by the user. [Bug 1016796] + LDFLAGS_ARCH="" + UNSHARED_LIB_SUFFIX="" + # TEA specific: use PACKAGE_VERSION instead of VERSION + TCL_TRIM_DOTS='`echo ${PACKAGE_VERSION} | tr -d .`' + ECHO_VERSION='`echo ${PACKAGE_VERSION}`' + TCL_LIB_VERSIONS_OK=ok + CFLAGS_DEBUG=-g + if test "$GCC" = yes; then + + CFLAGS_OPTIMIZE=-O2 + CFLAGS_WARNING="-Wall -Wwrite-strings" + +else + + CFLAGS_OPTIMIZE=-O + CFLAGS_WARNING="" + +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. +set dummy ${ac_tool_prefix}ar; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_AR+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AR="${ac_tool_prefix}ar" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +AR=$ac_cv_prog_AR +if test -n "$AR"; then + echo "$as_me:$LINENO: result: $AR" >&5 +echo "${ECHO_T}$AR" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_AR"; then + ac_ct_AR=$AR + # Extract the first word of "ar", so it can be a program name with args. +set dummy ar; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_AR+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_AR="ar" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_AR=$ac_cv_prog_ac_ct_AR +if test -n "$ac_ct_AR"; then + echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 +echo "${ECHO_T}$ac_ct_AR" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + AR=$ac_ct_AR +else + AR="$ac_cv_prog_AR" +fi + + STLIB_LD='${AR} cr' + LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH" + if test "x$SHLIB_VERSION" = x; then + SHLIB_VERSION="" +else + SHLIB_VERSION=".$SHLIB_VERSION" +fi + + case $system in + # TEA specific: + windows) + # This is a 2-stage check to make sure we have the 64-bit SDK + # We have to know where the SDK is installed. + # This magic is based on MS Platform SDK for Win2003 SP1 - hobbs + # MACHINE is IX86 for LINK, but this is used by the manifest, + # which requires x86|amd64|ia64. + MACHINE="X86" + if test "$do64bit" != "no" ; then + if test "x${MSSDK}x" = "xx" ; then + MSSDK="C:/Progra~1/Microsoft Platform SDK" + fi + MSSDK=`echo "$MSSDK" | sed -e 's!\\\!/!g'` + PATH64="" + case "$do64bit" in + amd64|x64|yes) + MACHINE="AMD64" ; # default to AMD64 64-bit build + PATH64="${MSSDK}/Bin/Win64/x86/AMD64" + ;; + ia64) + MACHINE="IA64" + PATH64="${MSSDK}/Bin/Win64" + ;; + esac + if test "$GCC" != "yes" -a ! -d "${PATH64}" ; then + { echo "$as_me:$LINENO: WARNING: Could not find 64-bit $MACHINE SDK to enable 64bit mode" >&5 +echo "$as_me: WARNING: Could not find 64-bit $MACHINE SDK to enable 64bit mode" >&2;} + { echo "$as_me:$LINENO: WARNING: Ensure latest Platform SDK is installed" >&5 +echo "$as_me: WARNING: Ensure latest Platform SDK is installed" >&2;} + do64bit="no" + else + echo "$as_me:$LINENO: result: Using 64-bit $MACHINE mode" >&5 +echo "${ECHO_T} Using 64-bit $MACHINE mode" >&6 + do64bit_ok="yes" + fi + fi + + if test "$doWince" != "no" ; then + if test "$do64bit" != "no" ; then + { { echo "$as_me:$LINENO: error: Windows/CE and 64-bit builds incompatible" >&5 +echo "$as_me: error: Windows/CE and 64-bit builds incompatible" >&2;} + { (exit 1); exit 1; }; } + fi + if test "$GCC" = "yes" ; then + { { echo "$as_me:$LINENO: error: Windows/CE and GCC builds incompatible" >&5 +echo "$as_me: error: Windows/CE and GCC builds incompatible" >&2;} + { (exit 1); exit 1; }; } + fi + + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-celib + + if test x"${no_celib}" = x ; then + # we reset no_celib in case something fails here + no_celib=true + +# Check whether --with-celib or --without-celib was given. +if test "${with_celib+set}" = set; then + withval="$with_celib" + with_celibconfig=${withval} +fi; + echo "$as_me:$LINENO: checking for Windows/CE celib directory" >&5 +echo $ECHO_N "checking for Windows/CE celib directory... $ECHO_C" >&6 + if test "${ac_cv_c_celibconfig+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + # First check to see if --with-celibconfig was specified. + if test x"${with_celibconfig}" != x ; then + if test -d "${with_celibconfig}/inc" ; then + ac_cv_c_celibconfig=`(cd ${with_celibconfig}; pwd)` + else + { { echo "$as_me:$LINENO: error: ${with_celibconfig} directory doesn't contain inc directory" >&5 +echo "$as_me: error: ${with_celibconfig} directory doesn't contain inc directory" >&2;} + { (exit 1); exit 1; }; } + fi + fi + + # then check for a celib library + if test x"${ac_cv_c_celibconfig}" = x ; then + for i in \ + ../celib-palm-3.0 \ + ../celib \ + ../../celib-palm-3.0 \ + ../../celib \ + `ls -dr ../celib-*3.[0-9]* 2>/dev/null` \ + ${srcdir}/../celib-palm-3.0 \ + ${srcdir}/../celib \ + `ls -dr ${srcdir}/../celib-*3.[0-9]* 2>/dev/null` \ + ; do + if test -d "$i/inc" ; then + ac_cv_c_celibconfig=`(cd $i; pwd)` + break + fi + done + fi + +fi + + if test x"${ac_cv_c_celibconfig}" = x ; then + { { echo "$as_me:$LINENO: error: Cannot find celib support library directory" >&5 +echo "$as_me: error: Cannot find celib support library directory" >&2;} + { (exit 1); exit 1; }; } + else + no_celib= + CELIB_DIR=${ac_cv_c_celibconfig} + CELIB_DIR=`echo "$CELIB_DIR" | sed -e 's!\\\!/!g'` + echo "$as_me:$LINENO: result: found $CELIB_DIR" >&5 +echo "${ECHO_T}found $CELIB_DIR" >&6 + fi + fi + + # Set defaults for common evc4/PPC2003 setup + # Currently Tcl requires 300+, possibly 420+ for sockets + CEVERSION=420; # could be 211 300 301 400 420 ... + TARGETCPU=ARMV4; # could be ARMV4 ARM MIPS SH3 X86 ... + ARCH=ARM; # could be ARM MIPS X86EM ... + PLATFORM="Pocket PC 2003"; # or "Pocket PC 2002" + if test "$doWince" != "yes"; then + # If !yes then the user specified something + # Reset ARCH to allow user to skip specifying it + ARCH= + eval `echo $doWince | awk -F, '{ \ + if (length($1)) { printf "CEVERSION=\"%s\"\n", $1; \ + if ($1 < 400) { printf "PLATFORM=\"Pocket PC 2002\"\n" } }; \ + if (length($2)) { printf "TARGETCPU=\"%s\"\n", toupper($2) }; \ + if (length($3)) { printf "ARCH=\"%s\"\n", toupper($3) }; \ + if (length($4)) { printf "PLATFORM=\"%s\"\n", $4 }; \ + }'` + if test "x${ARCH}" = "x" ; then + ARCH=$TARGETCPU; + fi + fi + OSVERSION=WCE$CEVERSION; + if test "x${WCEROOT}" = "x" ; then + WCEROOT="C:/Program Files/Microsoft eMbedded C++ 4.0" + if test ! -d "${WCEROOT}" ; then + WCEROOT="C:/Program Files/Microsoft eMbedded Tools" + fi + fi + if test "x${SDKROOT}" = "x" ; then + SDKROOT="C:/Program Files/Windows CE Tools" + if test ! -d "${SDKROOT}" ; then + SDKROOT="C:/Windows CE Tools" + fi + fi + WCEROOT=`echo "$WCEROOT" | sed -e 's!\\\!/!g'` + SDKROOT=`echo "$SDKROOT" | sed -e 's!\\\!/!g'` + if test ! -d "${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" \ + -o ! -d "${WCEROOT}/EVC/${OSVERSION}/bin"; then + { { echo "$as_me:$LINENO: error: could not find PocketPC SDK or target compiler to enable WinCE mode $CEVERSION,$TARGETCPU,$ARCH,$PLATFORM" >&5 +echo "$as_me: error: could not find PocketPC SDK or target compiler to enable WinCE mode $CEVERSION,$TARGETCPU,$ARCH,$PLATFORM" >&2;} + { (exit 1); exit 1; }; } + doWince="no" + else + # We could PATH_NOSPACE these, but that's not important, + # as long as we quote them when used. + CEINCLUDE="${SDKROOT}/${OSVERSION}/${PLATFORM}/include" + if test -d "${CEINCLUDE}/${TARGETCPU}" ; then + CEINCLUDE="${CEINCLUDE}/${TARGETCPU}" + fi + CELIBPATH="${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" + fi + fi + + if test "$GCC" != "yes" ; then + if test "${SHARED_BUILD}" = "0" ; then + runtime=-MT + else + runtime=-MD + fi + + if test "$do64bit" != "no" ; then + # All this magic is necessary for the Win64 SDK RC1 - hobbs + CC="\"${PATH64}/cl.exe\"" + CFLAGS="${CFLAGS} -I\"${MSSDK}/Include\" -I\"${MSSDK}/Include/crt\" -I\"${MSSDK}/Include/crt/sys\"" + RC="\"${MSSDK}/bin/rc.exe\"" + lflags="-nologo -MACHINE:${MACHINE} -LIBPATH:\"${MSSDK}/Lib/${MACHINE}\"" + LINKBIN="\"${PATH64}/link.exe\"" + CFLAGS_DEBUG="-nologo -Zi -Od -W3 ${runtime}d" + CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}" + # Avoid 'unresolved external symbol __security_cookie' + # errors, c.f. http://support.microsoft.com/?id=894573 + + vars="bufferoverflowU.lib" + for i in $vars; do + if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then + # Convert foo.lib to -lfoo for GCC. No-op if not *.lib + i=`echo "$i" | sed -e 's/^\([^-].*\)\.lib$/-l\1/i'` + fi + PKG_LIBS="$PKG_LIBS $i" + done + + + elif test "$doWince" != "no" ; then + CEBINROOT="${WCEROOT}/EVC/${OSVERSION}/bin" + if test "${TARGETCPU}" = "X86"; then + CC="\"${CEBINROOT}/cl.exe\"" + else + CC="\"${CEBINROOT}/cl${ARCH}.exe\"" + fi + CFLAGS="$CFLAGS -I\"${CELIB_DIR}/inc\" -I\"${CEINCLUDE}\"" + RC="\"${WCEROOT}/Common/EVC/bin/rc.exe\"" + arch=`echo ${ARCH} | awk '{print tolower($0)}'` + defs="${ARCH} _${ARCH}_ ${arch} PALM_SIZE _MT _WINDOWS" + if test "${SHARED_BUILD}" = "1" ; then + # Static CE builds require static celib as well + defs="${defs} _DLL" + fi + for i in $defs ; do + +cat >>confdefs.h <<_ACEOF +#define $i 1 +_ACEOF + + done + +cat >>confdefs.h <<_ACEOF +#define _WIN32_WCE $CEVERSION +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define UNDER_CE $CEVERSION +_ACEOF + + CFLAGS_DEBUG="-nologo -Zi -Od" + CFLAGS_OPTIMIZE="-nologo -Ox" + lversion=`echo ${CEVERSION} | sed -e 's/\(.\)\(..\)/\1\.\2/'` + lflags="-MACHINE:${ARCH} -LIBPATH:\"${CELIBPATH}\" -subsystem:windowsce,${lversion} -nologo" + LINKBIN="\"${CEBINROOT}/link.exe\"" + + else + RC="rc" + lflags="-nologo" + LINKBIN="link" + CFLAGS_DEBUG="-nologo -Z7 -Od -W3 -WX ${runtime}d" + CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}" + fi + fi + + if test "$GCC" = "yes"; then + # mingw gcc mode + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}windres", so it can be a program name with args. +set dummy ${ac_tool_prefix}windres; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_RC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$RC"; then + ac_cv_prog_RC="$RC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RC="${ac_tool_prefix}windres" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +RC=$ac_cv_prog_RC +if test -n "$RC"; then + echo "$as_me:$LINENO: result: $RC" >&5 +echo "${ECHO_T}$RC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_RC"; then + ac_ct_RC=$RC + # Extract the first word of "windres", so it can be a program name with args. +set dummy windres; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_RC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_RC"; then + ac_cv_prog_ac_ct_RC="$ac_ct_RC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RC="windres" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_RC=$ac_cv_prog_ac_ct_RC +if test -n "$ac_ct_RC"; then + echo "$as_me:$LINENO: result: $ac_ct_RC" >&5 +echo "${ECHO_T}$ac_ct_RC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + RC=$ac_ct_RC +else + RC="$ac_cv_prog_RC" +fi + + CFLAGS_DEBUG="-g" + CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer" + SHLIB_LD='${CC} -shared' + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' + LDFLAGS_CONSOLE="-wl,--subsystem,console ${lflags}" + LDFLAGS_WINDOW="-wl,--subsystem,windows ${lflags}" + + echo "$as_me:$LINENO: checking for cross-compile version of gcc" >&5 +echo $ECHO_N "checking for cross-compile version of gcc... $ECHO_C" >&6 +if test "${ac_cv_cross+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + + #ifdef _WIN32 + #error cross-compiler + #endif + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_cross=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_cross=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +fi +echo "$as_me:$LINENO: result: $ac_cv_cross" >&5 +echo "${ECHO_T}$ac_cv_cross" >&6 + if test "$ac_cv_cross" = "yes"; then + case "$do64bit" in + amd64|x64|yes) + CC="x86_64-w64-mingw32-gcc" + LD="x86_64-w64-mingw32-ld" + AR="x86_64-w64-mingw32-ar" + RANLIB="x86_64-w64-mingw32-ranlib" + RC="x86_64-w64-mingw32-windres" + ;; + *) + CC="i686-w64-mingw32-gcc" + LD="i686-w64-mingw32-ld" + AR="i686-w64-mingw32-ar" + RANLIB="i686-w64-mingw32-ranlib" + RC="i686-w64-mingw32-windres" + ;; + esac + fi + + else + SHLIB_LD="${LINKBIN} -dll ${lflags}" + # link -lib only works when -lib is the first arg + STLIB_LD="${LINKBIN} -lib ${lflags}" + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.lib' + PATHTYPE=-w + # For information on what debugtype is most useful, see: + # http://msdn.microsoft.com/library/en-us/dnvc60/html/gendepdebug.asp + # and also + # http://msdn2.microsoft.com/en-us/library/y0zzbyt4%28VS.80%29.aspx + # This essentially turns it all on. + LDFLAGS_DEBUG="-debug -debugtype:cv" + LDFLAGS_OPTIMIZE="-release" + if test "$doWince" != "no" ; then + LDFLAGS_CONSOLE="-link ${lflags}" + LDFLAGS_WINDOW=${LDFLAGS_CONSOLE} + else + LDFLAGS_CONSOLE="-link -subsystem:console ${lflags}" + LDFLAGS_WINDOW="-link -subsystem:windows ${lflags}" + fi + fi + + SHLIB_SUFFIX=".dll" + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.dll' + + TCL_LIB_VERSIONS_OK=nodots + ;; + AIX-*) + if test "${TCL_THREADS}" = "1" -a "$GCC" != "yes"; then + + # AIX requires the _r compiler when gcc isn't being used + case "${CC}" in + *_r|*_r\ *) + # ok ... + ;; + *) + # Make sure only first arg gets _r + CC=`echo "$CC" | sed -e 's/^\([^ ]*\)/\1_r/'` + ;; + esac + echo "$as_me:$LINENO: result: Using $CC for compiling with threads" >&5 +echo "${ECHO_T}Using $CC for compiling with threads" >&6 + +fi + + LIBS="$LIBS -lc" + SHLIB_CFLAGS="" + SHLIB_SUFFIX=".so" + + LD_LIBRARY_PATH_VAR="LIBPATH" + + # Check to enable 64-bit flags for compiler/linker + if test "$do64bit" = yes; then + + if test "$GCC" = yes; then + + { echo "$as_me:$LINENO: WARNING: 64bit mode not supported with GCC on $system" >&5 +echo "$as_me: WARNING: 64bit mode not supported with GCC on $system" >&2;} + +else + + do64bit_ok=yes + CFLAGS="$CFLAGS -q64" + LDFLAGS_ARCH="-q64" + RANLIB="${RANLIB} -X64" + AR="${AR} -X64" + SHLIB_LD_FLAGS="-b64" + +fi + + +fi + + + if test "`uname -m`" = ia64; then + + # AIX-5 uses ELF style dynamic libraries on IA-64, but not PPC + SHLIB_LD="/usr/ccs/bin/ld -G -z text" + if test "$GCC" = yes; then + + CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + +else + + CC_SEARCH_FLAGS='-R${LIB_RUNTIME_DIR}' + +fi + + LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' + +else + + if test "$GCC" = yes; then + + SHLIB_LD='${CC} -shared -Wl,-bexpall' + +else + + SHLIB_LD="/bin/ld -bhalt:4 -bM:SRE -bexpall -H512 -T512 -bnoentry" + LDFLAGS="$LDFLAGS -brtl" + +fi + + SHLIB_LD="${SHLIB_LD} ${SHLIB_LD_FLAGS}" + CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + +fi + + ;; + BeOS*) + SHLIB_CFLAGS="-fPIC" + SHLIB_LD='${CC} -nostart' + SHLIB_SUFFIX=".so" + + #----------------------------------------------------------- + # Check for inet_ntoa in -lbind, for BeOS (which also needs + # -lsocket, even if the network functions are in -lnet which + # is always linked to, for compatibility. + #----------------------------------------------------------- + echo "$as_me:$LINENO: checking for inet_ntoa in -lbind" >&5 +echo $ECHO_N "checking for inet_ntoa in -lbind... $ECHO_C" >&6 +if test "${ac_cv_lib_bind_inet_ntoa+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lbind $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char inet_ntoa (); +int +main () +{ +inet_ntoa (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_bind_inet_ntoa=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_bind_inet_ntoa=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_bind_inet_ntoa" >&5 +echo "${ECHO_T}$ac_cv_lib_bind_inet_ntoa" >&6 +if test $ac_cv_lib_bind_inet_ntoa = yes; then + LIBS="$LIBS -lbind -lsocket" +fi + + ;; + BSD/OS-4.*) + SHLIB_CFLAGS="-export-dynamic -fPIC" + SHLIB_LD='${CC} -shared' + SHLIB_SUFFIX=".so" + LDFLAGS="$LDFLAGS -export-dynamic" + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + CYGWIN_*) + SHLIB_CFLAGS="" + SHLIB_LD='${CC} -shared' + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} -Wl,--out-implib,\$@.a" + SHLIB_SUFFIX=".dll" + EXEEXT=".exe" + do64bit_ok=yes + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + Haiku*) + LDFLAGS="$LDFLAGS -Wl,--export-dynamic" + SHLIB_CFLAGS="-fPIC" + SHLIB_SUFFIX=".so" + SHLIB_LD='${CC} -shared ${CFLAGS} ${LDFLAGS}' + echo "$as_me:$LINENO: checking for inet_ntoa in -lnetwork" >&5 +echo $ECHO_N "checking for inet_ntoa in -lnetwork... $ECHO_C" >&6 +if test "${ac_cv_lib_network_inet_ntoa+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lnetwork $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char inet_ntoa (); +int +main () +{ +inet_ntoa (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_network_inet_ntoa=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_network_inet_ntoa=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_network_inet_ntoa" >&5 +echo "${ECHO_T}$ac_cv_lib_network_inet_ntoa" >&6 +if test $ac_cv_lib_network_inet_ntoa = yes; then + LIBS="$LIBS -lnetwork" +fi + + ;; + HP-UX-*.11.*) + # Use updated header definitions where possible + +cat >>confdefs.h <<\_ACEOF +#define _XOPEN_SOURCE_EXTENDED 1 +_ACEOF + + # TEA specific: Needed by Tcl, but not most extensions + #AC_DEFINE(_XOPEN_SOURCE, 1, [Do we want to use the XOPEN network library?]) + #LIBS="$LIBS -lxnet" # Use the XOPEN network library + + if test "`uname -m`" = ia64; then + + SHLIB_SUFFIX=".so" + # Use newer C++ library for C++ extensions + #if test "$GCC" != "yes" ; then + # CPPFLAGS="-AA" + #fi + +else + + SHLIB_SUFFIX=".sl" + +fi + + echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 +echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 +if test "${ac_cv_lib_dld_shl_load+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char shl_load (); +int +main () +{ +shl_load (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_dld_shl_load=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_dld_shl_load=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 +echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 +if test $ac_cv_lib_dld_shl_load = yes; then + tcl_ok=yes +else + tcl_ok=no +fi + + if test "$tcl_ok" = yes; then + + LDFLAGS="$LDFLAGS -Wl,-E" + CC_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.' + LD_SEARCH_FLAGS='+s +b ${LIB_RUNTIME_DIR}:.' + LD_LIBRARY_PATH_VAR="SHLIB_PATH" + +fi + + if test "$GCC" = yes; then + + SHLIB_LD='${CC} -shared' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + +else + + CFLAGS="$CFLAGS -z" + # Users may want PA-RISC 1.1/2.0 portable code - needs HP cc + #CFLAGS="$CFLAGS +DAportable" + SHLIB_CFLAGS="+z" + SHLIB_LD="ld -b" + +fi + + + # Check to enable 64-bit flags for compiler/linker + if test "$do64bit" = "yes"; then + + if test "$GCC" = yes; then + + case `${CC} -dumpmachine` in + hppa64*) + # 64-bit gcc in use. Fix flags for GNU ld. + do64bit_ok=yes + SHLIB_LD='${CC} -shared' + if test $doRpath = yes; then + + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' +fi + + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + ;; + *) + { echo "$as_me:$LINENO: WARNING: 64bit mode not supported with GCC on $system" >&5 +echo "$as_me: WARNING: 64bit mode not supported with GCC on $system" >&2;} + ;; + esac + +else + + do64bit_ok=yes + CFLAGS="$CFLAGS +DD64" + LDFLAGS_ARCH="+DD64" + +fi + + +fi + ;; + IRIX-6.*) + SHLIB_CFLAGS="" + SHLIB_LD="ld -n32 -shared -rdata_shared" + SHLIB_SUFFIX=".so" + if test $doRpath = yes; then + + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' +fi + + if test "$GCC" = yes; then + + CFLAGS="$CFLAGS -mabi=n32" + LDFLAGS="$LDFLAGS -mabi=n32" + +else + + case $system in + IRIX-6.3) + # Use to build 6.2 compatible binaries on 6.3. + CFLAGS="$CFLAGS -n32 -D_OLD_TERMIOS" + ;; + *) + CFLAGS="$CFLAGS -n32" + ;; + esac + LDFLAGS="$LDFLAGS -n32" + +fi + + ;; + IRIX64-6.*) + SHLIB_CFLAGS="" + SHLIB_LD="ld -n32 -shared -rdata_shared" + SHLIB_SUFFIX=".so" + if test $doRpath = yes; then + + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' +fi + + + # Check to enable 64-bit flags for compiler/linker + + if test "$do64bit" = yes; then + + if test "$GCC" = yes; then + + { echo "$as_me:$LINENO: WARNING: 64bit mode not supported by gcc" >&5 +echo "$as_me: WARNING: 64bit mode not supported by gcc" >&2;} + +else + + do64bit_ok=yes + SHLIB_LD="ld -64 -shared -rdata_shared" + CFLAGS="$CFLAGS -64" + LDFLAGS_ARCH="-64" + +fi + + +fi + + ;; + Linux*|GNU*|NetBSD-Debian) + SHLIB_CFLAGS="-fPIC" + SHLIB_SUFFIX=".so" + + # TEA specific: + CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer" + + # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS + SHLIB_LD='${CC} -shared ${CFLAGS} ${LDFLAGS_DEFAULT}' + LDFLAGS="$LDFLAGS -Wl,--export-dynamic" + if test $doRpath = yes; then + + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' +fi + + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + if test "`uname -m`" = "alpha"; then + CFLAGS="$CFLAGS -mieee" +fi + + if test $do64bit = yes; then + + echo "$as_me:$LINENO: checking if compiler accepts -m64 flag" >&5 +echo $ECHO_N "checking if compiler accepts -m64 flag... $ECHO_C" >&6 +if test "${tcl_cv_cc_m64+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + hold_cflags=$CFLAGS + CFLAGS="$CFLAGS -m64" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_cc_m64=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_cc_m64=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + CFLAGS=$hold_cflags +fi +echo "$as_me:$LINENO: result: $tcl_cv_cc_m64" >&5 +echo "${ECHO_T}$tcl_cv_cc_m64" >&6 + if test $tcl_cv_cc_m64 = yes; then + + CFLAGS="$CFLAGS -m64" + do64bit_ok=yes + +fi + + +fi + + + # The combo of gcc + glibc has a bug related to inlining of + # functions like strtod(). The -fno-builtin flag should address + # this problem but it does not work. The -fno-inline flag is kind + # of overkill but it works. Disable inlining only when one of the + # files in compat/*.c is being linked in. + + if test x"${USE_COMPAT}" != x; then + CFLAGS="$CFLAGS -fno-inline" +fi + + ;; + Lynx*) + SHLIB_CFLAGS="-fPIC" + SHLIB_SUFFIX=".so" + CFLAGS_OPTIMIZE=-02 + SHLIB_LD='${CC} -shared' + LD_FLAGS="-Wl,--export-dynamic" + if test $doRpath = yes; then + + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' +fi + + ;; + OpenBSD-*) + arch=`arch -s` + case "$arch" in + vax) + SHLIB_SUFFIX="" + SHARED_LIB_SUFFIX="" + LDFLAGS="" + ;; + *) + case "$arch" in + alpha|sparc64) + SHLIB_CFLAGS="-fPIC" + ;; + *) + SHLIB_CFLAGS="-fpic" + ;; + esac + SHLIB_LD='${CC} -shared ${SHLIB_CFLAGS}' + SHLIB_SUFFIX=".so" + if test $doRpath = yes; then + + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' +fi + + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so${SHLIB_VERSION}' + LDFLAGS="-Wl,-export-dynamic" + ;; + esac + case "$arch" in + vax) + CFLAGS_OPTIMIZE="-O1" + ;; + *) + CFLAGS_OPTIMIZE="-O2" + ;; + esac + if test "${TCL_THREADS}" = "1"; then + + # On OpenBSD: Compile with -pthread + # Don't link with -lpthread + LIBS=`echo $LIBS | sed s/-lpthread//` + CFLAGS="$CFLAGS -pthread" + +fi + + # OpenBSD doesn't do version numbers with dots. + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' + TCL_LIB_VERSIONS_OK=nodots + ;; + NetBSD-*) + # NetBSD has ELF and can use 'cc -shared' to build shared libs + SHLIB_CFLAGS="-fPIC" + SHLIB_LD='${CC} -shared ${SHLIB_CFLAGS}' + SHLIB_SUFFIX=".so" + LDFLAGS="$LDFLAGS -export-dynamic" + if test $doRpath = yes; then + + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' +fi + + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + if test "${TCL_THREADS}" = "1"; then + + # The -pthread needs to go in the CFLAGS, not LIBS + LIBS=`echo $LIBS | sed s/-pthread//` + CFLAGS="$CFLAGS -pthread" + LDFLAGS="$LDFLAGS -pthread" + +fi + + ;; + FreeBSD-*) + # This configuration from FreeBSD Ports. + SHLIB_CFLAGS="-fPIC" + SHLIB_LD="${CC} -shared" + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} -Wl,-soname,\$@" + SHLIB_SUFFIX=".so" + LDFLAGS="" + if test $doRpath = yes; then + + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' +fi + + if test "${TCL_THREADS}" = "1"; then + + # The -pthread needs to go in the LDFLAGS, not LIBS + LIBS=`echo $LIBS | sed s/-pthread//` + CFLAGS="$CFLAGS $PTHREAD_CFLAGS" + LDFLAGS="$LDFLAGS $PTHREAD_LIBS" +fi + + case $system in + FreeBSD-3.*) + # Version numbers are dot-stripped by system policy. + TCL_TRIM_DOTS=`echo ${PACKAGE_VERSION} | tr -d .` + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1' + TCL_LIB_VERSIONS_OK=nodots + ;; + esac + ;; + Darwin-*) + CFLAGS_OPTIMIZE="-Os" + SHLIB_CFLAGS="-fno-common" + # To avoid discrepancies between what headers configure sees during + # preprocessing tests and compiling tests, move any -isysroot and + # -mmacosx-version-min flags from CFLAGS to CPPFLAGS: + CPPFLAGS="${CPPFLAGS} `echo " ${CFLAGS}" | \ + awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \ + if ($i~/^(isysroot|mmacosx-version-min)/) print "-"$i}'`" + CFLAGS="`echo " ${CFLAGS}" | \ + awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \ + if (!($i~/^(isysroot|mmacosx-version-min)/)) print "-"$i}'`" + if test $do64bit = yes; then + + case `arch` in + ppc) + echo "$as_me:$LINENO: checking if compiler accepts -arch ppc64 flag" >&5 +echo $ECHO_N "checking if compiler accepts -arch ppc64 flag... $ECHO_C" >&6 +if test "${tcl_cv_cc_arch_ppc64+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + hold_cflags=$CFLAGS + CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_cc_arch_ppc64=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_cc_arch_ppc64=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + CFLAGS=$hold_cflags +fi +echo "$as_me:$LINENO: result: $tcl_cv_cc_arch_ppc64" >&5 +echo "${ECHO_T}$tcl_cv_cc_arch_ppc64" >&6 + if test $tcl_cv_cc_arch_ppc64 = yes; then + + CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5" + do64bit_ok=yes + +fi +;; + i386) + echo "$as_me:$LINENO: checking if compiler accepts -arch x86_64 flag" >&5 +echo $ECHO_N "checking if compiler accepts -arch x86_64 flag... $ECHO_C" >&6 +if test "${tcl_cv_cc_arch_x86_64+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + hold_cflags=$CFLAGS + CFLAGS="$CFLAGS -arch x86_64" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_cc_arch_x86_64=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_cc_arch_x86_64=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + CFLAGS=$hold_cflags +fi +echo "$as_me:$LINENO: result: $tcl_cv_cc_arch_x86_64" >&5 +echo "${ECHO_T}$tcl_cv_cc_arch_x86_64" >&6 + if test $tcl_cv_cc_arch_x86_64 = yes; then + + CFLAGS="$CFLAGS -arch x86_64" + do64bit_ok=yes + +fi +;; + *) + { echo "$as_me:$LINENO: WARNING: Don't know how enable 64-bit on architecture \`arch\`" >&5 +echo "$as_me: WARNING: Don't know how enable 64-bit on architecture \`arch\`" >&2;};; + esac + +else + + # Check for combined 32-bit and 64-bit fat build + if echo "$CFLAGS " |grep -E -q -- '-arch (ppc64|x86_64) ' \ + && echo "$CFLAGS " |grep -E -q -- '-arch (ppc|i386) '; then + + fat_32_64=yes +fi + + +fi + + # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS + SHLIB_LD='${CC} -dynamiclib ${CFLAGS} ${LDFLAGS_DEFAULT}' + echo "$as_me:$LINENO: checking if ld accepts -single_module flag" >&5 +echo $ECHO_N "checking if ld accepts -single_module flag... $ECHO_C" >&6 +if test "${tcl_cv_ld_single_module+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + hold_ldflags=$LDFLAGS + LDFLAGS="$LDFLAGS -dynamiclib -Wl,-single_module" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +int i; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_ld_single_module=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_ld_single_module=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$hold_ldflags +fi +echo "$as_me:$LINENO: result: $tcl_cv_ld_single_module" >&5 +echo "${ECHO_T}$tcl_cv_ld_single_module" >&6 + if test $tcl_cv_ld_single_module = yes; then + + SHLIB_LD="${SHLIB_LD} -Wl,-single_module" + +fi + + # TEA specific: link shlib with current and compatibility version flags + vers=`echo ${PACKAGE_VERSION} | sed -e 's/^\([0-9]\{1,5\}\)\(\(\.[0-9]\{1,3\}\)\{0,2\}\).*$/\1\2/p' -e d` + SHLIB_LD="${SHLIB_LD} -current_version ${vers:-0} -compatibility_version ${vers:-0}" + SHLIB_SUFFIX=".dylib" + # Don't use -prebind when building for Mac OS X 10.4 or later only: + if test "`echo "${MACOSX_DEPLOYMENT_TARGET}" | awk -F '10\\.' '{print int($2)}'`" -lt 4 -a \ + "`echo "${CPPFLAGS}" | awk -F '-mmacosx-version-min=10\\.' '{print int($2)}'`" -lt 4; then + + LDFLAGS="$LDFLAGS -prebind" +fi + + LDFLAGS="$LDFLAGS -headerpad_max_install_names" + echo "$as_me:$LINENO: checking if ld accepts -search_paths_first flag" >&5 +echo $ECHO_N "checking if ld accepts -search_paths_first flag... $ECHO_C" >&6 +if test "${tcl_cv_ld_search_paths_first+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + hold_ldflags=$LDFLAGS + LDFLAGS="$LDFLAGS -Wl,-search_paths_first" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +int i; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_ld_search_paths_first=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_ld_search_paths_first=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$hold_ldflags +fi +echo "$as_me:$LINENO: result: $tcl_cv_ld_search_paths_first" >&5 +echo "${ECHO_T}$tcl_cv_ld_search_paths_first" >&6 + if test $tcl_cv_ld_search_paths_first = yes; then + + LDFLAGS="$LDFLAGS -Wl,-search_paths_first" + +fi + + if test "$tcl_cv_cc_visibility_hidden" != yes; then + + +cat >>confdefs.h <<\_ACEOF +#define MODULE_SCOPE __private_extern__ +_ACEOF + + tcl_cv_cc_visibility_hidden=yes + +fi + + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + LD_LIBRARY_PATH_VAR="DYLD_LIBRARY_PATH" + # TEA specific: for combined 32 & 64 bit fat builds of Tk + # extensions, verify that 64-bit build is possible. + if test "$fat_32_64" = yes && test -n "${TK_BIN_DIR}"; then + + if test "${TEA_WINDOWINGSYSTEM}" = x11; then + + echo "$as_me:$LINENO: checking for 64-bit X11" >&5 +echo $ECHO_N "checking for 64-bit X11... $ECHO_C" >&6 +if test "${tcl_cv_lib_x11_64+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + for v in CFLAGS CPPFLAGS LDFLAGS; do + eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc / /g" -e "s/-arch i386 / /g"`"' + done + CPPFLAGS="$CPPFLAGS -I/usr/X11R6/include" + LDFLAGS="$LDFLAGS -L/usr/X11R6/lib -lX11" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +int +main () +{ +XrmInitialize(); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_lib_x11_64=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_lib_x11_64=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + for v in CFLAGS CPPFLAGS LDFLAGS; do + eval $v'="$hold_'$v'"' + done +fi +echo "$as_me:$LINENO: result: $tcl_cv_lib_x11_64" >&5 +echo "${ECHO_T}$tcl_cv_lib_x11_64" >&6 + +fi + + if test "${TEA_WINDOWINGSYSTEM}" = aqua; then + + echo "$as_me:$LINENO: checking for 64-bit Tk" >&5 +echo $ECHO_N "checking for 64-bit Tk... $ECHO_C" >&6 +if test "${tcl_cv_lib_tk_64+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + for v in CFLAGS CPPFLAGS LDFLAGS; do + eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc / /g" -e "s/-arch i386 / /g"`"' + done + CPPFLAGS="$CPPFLAGS -DUSE_TCL_STUBS=1 -DUSE_TK_STUBS=1 ${TCL_INCLUDES} ${TK_INCLUDES}" + LDFLAGS="$LDFLAGS ${TCL_STUB_LIB_SPEC} ${TK_STUB_LIB_SPEC}" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +int +main () +{ +Tk_InitStubs(NULL, "", 0); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_lib_tk_64=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_lib_tk_64=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + for v in CFLAGS CPPFLAGS LDFLAGS; do + eval $v'="$hold_'$v'"' + done +fi +echo "$as_me:$LINENO: result: $tcl_cv_lib_tk_64" >&5 +echo "${ECHO_T}$tcl_cv_lib_tk_64" >&6 + +fi + + # remove 64-bit arch flags from CFLAGS et al. if configuration + # does not support 64-bit. + if test "$tcl_cv_lib_tk_64" = no -o "$tcl_cv_lib_x11_64" = no; then + + { echo "$as_me:$LINENO: Removing 64-bit architectures from compiler & linker flags" >&5 +echo "$as_me: Removing 64-bit architectures from compiler & linker flags" >&6;} + for v in CFLAGS CPPFLAGS LDFLAGS; do + eval $v'="`echo "$'$v' "|sed -e "s/-arch ppc64 / /g" -e "s/-arch x86_64 / /g"`"' + done +fi + + +fi + + ;; + OS/390-*) + CFLAGS_OPTIMIZE="" # Optimizer is buggy + +cat >>confdefs.h <<\_ACEOF +#define _OE_SOCKETS 1 +_ACEOF + + ;; + OSF1-V*) + # Digital OSF/1 + SHLIB_CFLAGS="" + if test "$SHARED_BUILD" = 1; then + + SHLIB_LD='ld -shared -expect_unresolved "*"' + +else + + SHLIB_LD='ld -non_shared -expect_unresolved "*"' + +fi + + SHLIB_SUFFIX=".so" + if test $doRpath = yes; then + + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' +fi + + if test "$GCC" = yes; then + CFLAGS="$CFLAGS -mieee" +else + + CFLAGS="$CFLAGS -DHAVE_TZSET -std1 -ieee" +fi + + # see pthread_intro(3) for pthread support on osf1, k.furukawa + if test "${TCL_THREADS}" = 1; then + + CFLAGS="$CFLAGS -DHAVE_PTHREAD_ATTR_SETSTACKSIZE" + CFLAGS="$CFLAGS -DTCL_THREAD_STACK_MIN=PTHREAD_STACK_MIN*64" + LIBS=`echo $LIBS | sed s/-lpthreads//` + if test "$GCC" = yes; then + + LIBS="$LIBS -lpthread -lmach -lexc" + +else + + CFLAGS="$CFLAGS -pthread" + LDFLAGS="$LDFLAGS -pthread" + +fi + + +fi + + ;; + QNX-6*) + # QNX RTP + # This may work for all QNX, but it was only reported for v6. + SHLIB_CFLAGS="-fPIC" + SHLIB_LD="ld -Bshareable -x" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + SCO_SV-3.2*) + if test "$GCC" = yes; then + + SHLIB_CFLAGS="-fPIC -melf" + LDFLAGS="$LDFLAGS -melf -Wl,-Bexport" + +else + + SHLIB_CFLAGS="-Kpic -belf" + LDFLAGS="$LDFLAGS -belf -Wl,-Bexport" + +fi + + SHLIB_LD="ld -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + SunOS-5.[0-6]) + # Careful to not let 5.10+ fall into this case + + # Note: If _REENTRANT isn't defined, then Solaris + # won't define thread-safe library routines. + + +cat >>confdefs.h <<\_ACEOF +#define _REENTRANT 1 +_ACEOF + + +cat >>confdefs.h <<\_ACEOF +#define _POSIX_PTHREAD_SEMANTICS 1 +_ACEOF + + + SHLIB_CFLAGS="-KPIC" + SHLIB_SUFFIX=".so" + if test "$GCC" = yes; then + + SHLIB_LD='${CC} -shared' + CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + +else + + SHLIB_LD="/usr/ccs/bin/ld -G -z text" + CC_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + +fi + + ;; + SunOS-5*) + # Note: If _REENTRANT isn't defined, then Solaris + # won't define thread-safe library routines. + + +cat >>confdefs.h <<\_ACEOF +#define _REENTRANT 1 +_ACEOF + + +cat >>confdefs.h <<\_ACEOF +#define _POSIX_PTHREAD_SEMANTICS 1 +_ACEOF + + + SHLIB_CFLAGS="-KPIC" + + # Check to enable 64-bit flags for compiler/linker + if test "$do64bit" = yes; then + + arch=`isainfo` + if test "$arch" = "sparcv9 sparc"; then + + if test "$GCC" = yes; then + + if test "`${CC} -dumpversion | awk -F. '{print $1}'`" -lt 3; then + + { echo "$as_me:$LINENO: WARNING: 64bit mode not supported with GCC < 3.2 on $system" >&5 +echo "$as_me: WARNING: 64bit mode not supported with GCC < 3.2 on $system" >&2;} + +else + + do64bit_ok=yes + CFLAGS="$CFLAGS -m64 -mcpu=v9" + LDFLAGS="$LDFLAGS -m64 -mcpu=v9" + SHLIB_CFLAGS="-fPIC" + +fi + + +else + + do64bit_ok=yes + if test "$do64bitVIS" = yes; then + + CFLAGS="$CFLAGS -xarch=v9a" + LDFLAGS_ARCH="-xarch=v9a" + +else + + CFLAGS="$CFLAGS -xarch=v9" + LDFLAGS_ARCH="-xarch=v9" + +fi + + # Solaris 64 uses this as well + #LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH_64" + +fi + + +else + if test "$arch" = "amd64 i386"; then + + if test "$GCC" = yes; then + + case $system in + SunOS-5.1[1-9]*|SunOS-5.[2-9][0-9]*) + do64bit_ok=yes + CFLAGS="$CFLAGS -m64" + LDFLAGS="$LDFLAGS -m64";; + *) + { echo "$as_me:$LINENO: WARNING: 64bit mode not supported with GCC on $system" >&5 +echo "$as_me: WARNING: 64bit mode not supported with GCC on $system" >&2;};; + esac + +else + + do64bit_ok=yes + case $system in + SunOS-5.1[1-9]*|SunOS-5.[2-9][0-9]*) + CFLAGS="$CFLAGS -m64" + LDFLAGS="$LDFLAGS -m64";; + *) + CFLAGS="$CFLAGS -xarch=amd64" + LDFLAGS="$LDFLAGS -xarch=amd64";; + esac + +fi + + +else + { echo "$as_me:$LINENO: WARNING: 64bit mode not supported for $arch" >&5 +echo "$as_me: WARNING: 64bit mode not supported for $arch" >&2;} +fi + +fi + + +fi + + + SHLIB_SUFFIX=".so" + if test "$GCC" = yes; then + + SHLIB_LD='${CC} -shared' + CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + if test "$do64bit_ok" = yes; then + + if test "$arch" = "sparcv9 sparc"; then + + # We need to specify -static-libgcc or we need to + # add the path to the sparv9 libgcc. + # JH: static-libgcc is necessary for core Tcl, but may + # not be necessary for extensions. + SHLIB_LD="$SHLIB_LD -m64 -mcpu=v9 -static-libgcc" + # for finding sparcv9 libgcc, get the regular libgcc + # path, remove so name and append 'sparcv9' + #v9gcclibdir="`gcc -print-file-name=libgcc_s.so` | ..." + #CC_SEARCH_FLAGS="${CC_SEARCH_FLAGS},-R,$v9gcclibdir" + +else + if test "$arch" = "amd64 i386"; then + + # JH: static-libgcc is necessary for core Tcl, but may + # not be necessary for extensions. + SHLIB_LD="$SHLIB_LD -m64 -static-libgcc" + +fi + +fi + + +fi + + +else + + case $system in + SunOS-5.[1-9][0-9]*) + # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS + SHLIB_LD='${CC} -G -z text ${LDFLAGS_DEFAULT}';; + *) + SHLIB_LD='/usr/ccs/bin/ld -G -z text';; + esac + CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' + +fi + + ;; + UNIX_SV* | UnixWare-5*) + SHLIB_CFLAGS="-KPIC" + SHLIB_LD='${CC} -G' + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + # Some UNIX_SV* systems (unixware 1.1.2 for example) have linkers + # that don't grok the -Bexport option. Test that it does. + echo "$as_me:$LINENO: checking for ld accepts -Bexport flag" >&5 +echo $ECHO_N "checking for ld accepts -Bexport flag... $ECHO_C" >&6 +if test "${tcl_cv_ld_Bexport+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + hold_ldflags=$LDFLAGS + LDFLAGS="$LDFLAGS -Wl,-Bexport" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +int i; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_ld_Bexport=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_ld_Bexport=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$hold_ldflags +fi +echo "$as_me:$LINENO: result: $tcl_cv_ld_Bexport" >&5 +echo "${ECHO_T}$tcl_cv_ld_Bexport" >&6 + if test $tcl_cv_ld_Bexport = yes; then + + LDFLAGS="$LDFLAGS -Wl,-Bexport" + +fi + + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + esac + + if test "$do64bit" = yes -a "$do64bit_ok" = no; then + + { echo "$as_me:$LINENO: WARNING: 64bit support being disabled -- don't know magic for this platform" >&5 +echo "$as_me: WARNING: 64bit support being disabled -- don't know magic for this platform" >&2;} + +fi + + + + + # Add in the arch flags late to ensure it wasn't removed. + # Not necessary in TEA, but this is aligned with core + LDFLAGS="$LDFLAGS $LDFLAGS_ARCH" + + # If we're running gcc, then change the C flags for compiling shared + # libraries to the right flags for gcc, instead of those for the + # standard manufacturer compiler. + + if test "$GCC" = yes; then + + case $system in + AIX-*) ;; + BSD/OS*) ;; + CYGWIN_*|MINGW32_*) ;; + IRIX*) ;; + NetBSD-*|FreeBSD-*|OpenBSD-*) ;; + Darwin-*) ;; + SCO_SV-3.2*) ;; + windows) ;; + *) SHLIB_CFLAGS="-fPIC" ;; + esac +fi + + + if test "$tcl_cv_cc_visibility_hidden" != yes; then + + +cat >>confdefs.h <<\_ACEOF +#define MODULE_SCOPE extern +_ACEOF + + +fi + + + if test "$SHARED_LIB_SUFFIX" = ""; then + + # TEA specific: use PACKAGE_VERSION instead of VERSION + SHARED_LIB_SUFFIX='${PACKAGE_VERSION}${SHLIB_SUFFIX}' +fi + + if test "$UNSHARED_LIB_SUFFIX" = ""; then + + # TEA specific: use PACKAGE_VERSION instead of VERSION + UNSHARED_LIB_SUFFIX='${PACKAGE_VERSION}.a' +fi + + + if test "${GCC}" = "yes" -a ${SHLIB_SUFFIX} = ".dll"; then + echo "$as_me:$LINENO: checking for SEH support in compiler" >&5 +echo $ECHO_N "checking for SEH support in compiler... $ECHO_C" >&6 +if test "${tcl_cv_seh+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "$cross_compiling" = yes; then + tcl_cv_seh=no +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +#define WIN32_LEAN_AND_MEAN +#include +#undef WIN32_LEAN_AND_MEAN + + int main(int argc, char** argv) { + int a, b = 0; + __try { + a = 666 / b; + } + __except (EXCEPTION_EXECUTE_HANDLER) { + return 0; + } + return 1; + } + +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_seh=yes +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +tcl_cv_seh=no +fi +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi + +fi +echo "$as_me:$LINENO: result: $tcl_cv_seh" >&5 +echo "${ECHO_T}$tcl_cv_seh" >&6 + if test "$tcl_cv_seh" = "no" ; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_NO_SEH 1 +_ACEOF + + fi + + # + # Check to see if the excpt.h include file provided contains the + # definition for EXCEPTION_DISPOSITION; if not, which is the case + # with Cygwin's version as of 2002-04-10, define it to be int, + # sufficient for getting the current code to work. + # + echo "$as_me:$LINENO: checking for EXCEPTION_DISPOSITION support in include files" >&5 +echo $ECHO_N "checking for EXCEPTION_DISPOSITION support in include files... $ECHO_C" >&6 +if test "${tcl_cv_eh_disposition+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +# define WIN32_LEAN_AND_MEAN +# include +# undef WIN32_LEAN_AND_MEAN + +int +main () +{ + + EXCEPTION_DISPOSITION x; + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_eh_disposition=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_eh_disposition=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +fi +echo "$as_me:$LINENO: result: $tcl_cv_eh_disposition" >&5 +echo "${ECHO_T}$tcl_cv_eh_disposition" >&6 + if test "$tcl_cv_eh_disposition" = "no" ; then + +cat >>confdefs.h <<\_ACEOF +#define EXCEPTION_DISPOSITION int +_ACEOF + + fi + + # Check to see if winnt.h defines CHAR, SHORT, and LONG + # even if VOID has already been #defined. The win32api + # used by mingw and cygwin is known to do this. + + echo "$as_me:$LINENO: checking for winnt.h that ignores VOID define" >&5 +echo $ECHO_N "checking for winnt.h that ignores VOID define... $ECHO_C" >&6 +if test "${tcl_cv_winnt_ignore_void+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +#define VOID void +#define WIN32_LEAN_AND_MEAN +#include +#undef WIN32_LEAN_AND_MEAN + +int +main () +{ + + CHAR c; + SHORT s; + LONG l; + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_winnt_ignore_void=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_winnt_ignore_void=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +fi +echo "$as_me:$LINENO: result: $tcl_cv_winnt_ignore_void" >&5 +echo "${ECHO_T}$tcl_cv_winnt_ignore_void" >&6 + if test "$tcl_cv_winnt_ignore_void" = "yes" ; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_WINNT_IGNORE_VOID 1 +_ACEOF + + fi + fi + + # See if the compiler supports casting to a union type. + # This is used to stop gcc from printing a compiler + # warning when initializing a union member. + + echo "$as_me:$LINENO: checking for cast to union support" >&5 +echo $ECHO_N "checking for cast to union support... $ECHO_C" >&6 +if test "${tcl_cv_cast_to_union+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + union foo { int i; double d; }; + union foo f = (union foo) (int) 0; + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_cast_to_union=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_cast_to_union=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +fi +echo "$as_me:$LINENO: result: $tcl_cv_cast_to_union" >&5 +echo "${ECHO_T}$tcl_cv_cast_to_union" >&6 + if test "$tcl_cv_cast_to_union" = "yes"; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_CAST_TO_UNION 1 +_ACEOF + + fi + + + + + + + + + + + + + + # These must be called after we do the basic CFLAGS checks and + # verify any possible 64-bit or similar switches are necessary + + echo "$as_me:$LINENO: checking for required early compiler flags" >&5 +echo $ECHO_N "checking for required early compiler flags... $ECHO_C" >&6 + tcl_flags="" + + if test "${tcl_cv_flag__isoc99_source+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +int +main () +{ +char *p = (char *)strtoll; char *q = (char *)strtoull; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_flag__isoc99_source=no +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#define _ISOC99_SOURCE 1 +#include +int +main () +{ +char *p = (char *)strtoll; char *q = (char *)strtoull; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_flag__isoc99_source=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_flag__isoc99_source=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi + + if test "x${tcl_cv_flag__isoc99_source}" = "xyes" ; then + +cat >>confdefs.h <<\_ACEOF +#define _ISOC99_SOURCE 1 +_ACEOF + + tcl_flags="$tcl_flags _ISOC99_SOURCE" + fi + + + if test "${tcl_cv_flag__largefile64_source+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +int +main () +{ +struct stat64 buf; int i = stat64("/", &buf); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_flag__largefile64_source=no +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#define _LARGEFILE64_SOURCE 1 +#include +int +main () +{ +struct stat64 buf; int i = stat64("/", &buf); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_flag__largefile64_source=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_flag__largefile64_source=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi + + if test "x${tcl_cv_flag__largefile64_source}" = "xyes" ; then + +cat >>confdefs.h <<\_ACEOF +#define _LARGEFILE64_SOURCE 1 +_ACEOF + + tcl_flags="$tcl_flags _LARGEFILE64_SOURCE" + fi + + + if test "${tcl_cv_flag__largefile_source64+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +int +main () +{ +char *p = (char *)open64; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_flag__largefile_source64=no +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#define _LARGEFILE_SOURCE64 1 +#include +int +main () +{ +char *p = (char *)open64; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_flag__largefile_source64=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_flag__largefile_source64=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi + + if test "x${tcl_cv_flag__largefile_source64}" = "xyes" ; then + +cat >>confdefs.h <<\_ACEOF +#define _LARGEFILE_SOURCE64 1 +_ACEOF + + tcl_flags="$tcl_flags _LARGEFILE_SOURCE64" + fi + + if test "x${tcl_flags}" = "x" ; then + echo "$as_me:$LINENO: result: none" >&5 +echo "${ECHO_T}none" >&6 + else + echo "$as_me:$LINENO: result: ${tcl_flags}" >&5 +echo "${ECHO_T}${tcl_flags}" >&6 + fi + + + echo "$as_me:$LINENO: checking for 64-bit integer type" >&5 +echo $ECHO_N "checking for 64-bit integer type... $ECHO_C" >&6 + if test "${tcl_cv_type_64bit+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + tcl_cv_type_64bit=none + # See if the compiler knows natively about __int64 + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +__int64 value = (__int64) 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_type_64bit=__int64 +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_type_64bit="long long" +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + # See if we should use long anyway Note that we substitute in the + # type that is our current guess for a 64-bit type inside this check + # program, so it should be modified only carefully... + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +switch (0) { + case 1: case (sizeof(${tcl_type_64bit})==sizeof(long)): ; + } + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_type_64bit=${tcl_type_64bit} +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi + + if test "${tcl_cv_type_64bit}" = none ; then + +cat >>confdefs.h <<\_ACEOF +#define TCL_WIDE_INT_IS_LONG 1 +_ACEOF + + echo "$as_me:$LINENO: result: using long" >&5 +echo "${ECHO_T}using long" >&6 + elif test "${tcl_cv_type_64bit}" = "__int64" \ + -a "${TEA_PLATFORM}" = "windows" ; then + # TEA specific: We actually want to use the default tcl.h checks in + # this case to handle both TCL_WIDE_INT_TYPE and TCL_LL_MODIFIER* + echo "$as_me:$LINENO: result: using Tcl header defaults" >&5 +echo "${ECHO_T}using Tcl header defaults" >&6 + else + +cat >>confdefs.h <<_ACEOF +#define TCL_WIDE_INT_TYPE ${tcl_cv_type_64bit} +_ACEOF + + echo "$as_me:$LINENO: result: ${tcl_cv_type_64bit}" >&5 +echo "${ECHO_T}${tcl_cv_type_64bit}" >&6 + + # Now check for auxiliary declarations + echo "$as_me:$LINENO: checking for struct dirent64" >&5 +echo $ECHO_N "checking for struct dirent64... $ECHO_C" >&6 +if test "${tcl_cv_struct_dirent64+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +int +main () +{ +struct dirent64 p; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_struct_dirent64=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_struct_dirent64=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $tcl_cv_struct_dirent64" >&5 +echo "${ECHO_T}$tcl_cv_struct_dirent64" >&6 + if test "x${tcl_cv_struct_dirent64}" = "xyes" ; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_STRUCT_DIRENT64 1 +_ACEOF + + fi + + echo "$as_me:$LINENO: checking for struct stat64" >&5 +echo $ECHO_N "checking for struct stat64... $ECHO_C" >&6 +if test "${tcl_cv_struct_stat64+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +int +main () +{ +struct stat64 p; + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_struct_stat64=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_struct_stat64=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $tcl_cv_struct_stat64" >&5 +echo "${ECHO_T}$tcl_cv_struct_stat64" >&6 + if test "x${tcl_cv_struct_stat64}" = "xyes" ; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_STRUCT_STAT64 1 +_ACEOF + + fi + + + +for ac_func in open64 lseek64 +do +as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_func" >&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +if eval "test \"\${$as_ac_var+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case declares $ac_func. + For example, HP-UX 11i declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $ac_func + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +choke me +#else +char (*f) () = $ac_func; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != $ac_func; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_var=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_var=no" +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 +if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + + echo "$as_me:$LINENO: checking for off64_t" >&5 +echo $ECHO_N "checking for off64_t... $ECHO_C" >&6 + if test "${tcl_cv_type_off64_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +int +main () +{ +off64_t offset; + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_type_off64_t=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_type_off64_t=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi + + if test "x${tcl_cv_type_off64_t}" = "xyes" && \ + test "x${ac_cv_func_lseek64}" = "xyes" && \ + test "x${ac_cv_func_open64}" = "xyes" ; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_TYPE_OFF64_T 1 +_ACEOF + + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 + fi + fi + + + +#-------------------------------------------------------------------- +# Set the default compiler switches based on the --enable-symbols option. +#-------------------------------------------------------------------- + + + + echo "$as_me:$LINENO: checking for build with symbols" >&5 +echo $ECHO_N "checking for build with symbols... $ECHO_C" >&6 + # Check whether --enable-symbols or --disable-symbols was given. +if test "${enable_symbols+set}" = set; then + enableval="$enable_symbols" + tcl_ok=$enableval +else + tcl_ok=no +fi; + DBGX="" + if test "$tcl_ok" = "no"; then + CFLAGS_DEFAULT="${CFLAGS_OPTIMIZE} -DNDEBUG" + LDFLAGS_DEFAULT="${LDFLAGS_OPTIMIZE}" + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 + else + CFLAGS_DEFAULT="${CFLAGS_DEBUG}" + LDFLAGS_DEFAULT="${LDFLAGS_DEBUG}" + if test "$tcl_ok" = "yes"; then + echo "$as_me:$LINENO: result: yes (standard debugging)" >&5 +echo "${ECHO_T}yes (standard debugging)" >&6 + fi + fi + # TEA specific: + if test "${TEA_PLATFORM}" != "windows" ; then + LDFLAGS_DEFAULT="${LDFLAGS}" + fi + + + + + if test "$tcl_ok" = "mem" -o "$tcl_ok" = "all"; then + +cat >>confdefs.h <<\_ACEOF +#define TCL_MEM_DEBUG 1 +_ACEOF + + fi + + if test "$tcl_ok" != "yes" -a "$tcl_ok" != "no"; then + if test "$tcl_ok" = "all"; then + echo "$as_me:$LINENO: result: enabled symbols mem debugging" >&5 +echo "${ECHO_T}enabled symbols mem debugging" >&6 + else + echo "$as_me:$LINENO: result: enabled $tcl_ok debugging" >&5 +echo "${ECHO_T}enabled $tcl_ok debugging" >&6 + fi + fi + + +#-------------------------------------------------------------------- +# For Unix/Tk builds, make sure that the X libraries/headers are found. +# This must be called after TEA_CONFIG_CFLAGS as it adjusts LIBS. +#-------------------------------------------------------------------- + +# See [Bug #82910] +#TEA_PATH_X + +#-------------------------------------------------------------------- +# Everyone should be linking against the Tcl stub library. If you +# can't for some reason, remove this definition. If you aren't using +# stubs, you also need to modify the SHLIB_LD_LIBS setting below to +# link against the non-stubbed Tcl library. +#-------------------------------------------------------------------- + +cat >>confdefs.h <<\_ACEOF +#define USE_TCL_STUBS 1 +_ACEOF + +cat >>confdefs.h <<\_ACEOF +#define USE_TK_STUBS 1 +_ACEOF + + +#-------------------------------------------------------------------- +# This macro generates a line to use when building a library. It +# depends on values set by the TEA_ENABLE_SHARED, TEA_ENABLE_SYMBOLS, +# and TEA_LOAD_TCLCONFIG macros above. +#-------------------------------------------------------------------- + + + if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes"; then + MAKE_STATIC_LIB="\${STLIB_LD} -out:\$@ \$(PKG_OBJECTS)" + MAKE_SHARED_LIB="\${SHLIB_LD} \${SHLIB_LD_LIBS} \${LDFLAGS_DEFAULT} -out:\$@ \$(PKG_OBJECTS)" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +#if defined(_MSC_VER) && _MSC_VER >= 1400 +print("manifest needed") +#endif + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "manifest needed" >/dev/null 2>&1; then + + # Could do a CHECK_PROG for mt, but should always be with MSVC8+ + VC_MANIFEST_EMBED_DLL="if test -f \$@.manifest ; then mt.exe -nologo -manifest \$@.manifest -outputresource:\$@\;2 ; fi" + VC_MANIFEST_EMBED_EXE="if test -f \$@.manifest ; then mt.exe -nologo -manifest \$@.manifest -outputresource:\$@\;1 ; fi" + MAKE_SHARED_LIB="${MAKE_SHARED_LIB} ; ${VC_MANIFEST_EMBED_DLL}" + + CLEANFILES="$CLEANFILES *.manifest" + + +fi +rm -f conftest* + + MAKE_STUB_LIB="\${STLIB_LD} -nodefaultlib -out:\$@ \$(PKG_STUB_OBJECTS)" + else + MAKE_STATIC_LIB="\${STLIB_LD} \$@ \$(PKG_OBJECTS)" + MAKE_SHARED_LIB="\${SHLIB_LD} -o \$@ \$(PKG_OBJECTS) \${SHLIB_LD_LIBS}" + MAKE_STUB_LIB="\${STLIB_LD} \$@ \$(PKG_STUB_OBJECTS)" + fi + + if test "${SHARED_BUILD}" = "1" ; then + MAKE_LIB="${MAKE_SHARED_LIB} " + else + MAKE_LIB="${MAKE_STATIC_LIB} " + fi + + #-------------------------------------------------------------------- + # Shared libraries and static libraries have different names. + # Use the double eval to make sure any variables in the suffix is + # substituted. (@@@ Might not be necessary anymore) + #-------------------------------------------------------------------- + + if test "${TEA_PLATFORM}" = "windows" ; then + if test "${SHARED_BUILD}" = "1" ; then + # We force the unresolved linking of symbols that are really in + # the private libraries of Tcl and Tk. + if test x"${TK_BIN_DIR}" != x ; then + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TK_BIN_DIR}/${TK_STUB_LIB_FILE}`\"" + fi + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}`\"" + if test "$GCC" = "yes"; then + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} -static-libgcc" + fi + eval eval "PKG_LIB_FILE=${PACKAGE_LIB_PREFIX}${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" + else + eval eval "PKG_LIB_FILE=${PACKAGE_LIB_PREFIX}${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" + if test "$GCC" = "yes"; then + PKG_LIB_FILE=lib${PKG_LIB_FILE} + fi + fi + # Some packages build their own stubs libraries + eval eval "PKG_STUB_LIB_FILE=${PACKAGE_LIB_PREFIX}${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}" + if test "$GCC" = "yes"; then + PKG_STUB_LIB_FILE=lib${PKG_STUB_LIB_FILE} + fi + # These aren't needed on Windows (either MSVC or gcc) + RANLIB=: + RANLIB_STUB=: + else + RANLIB_STUB="${RANLIB}" + if test "${SHARED_BUILD}" = "1" ; then + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TCL_STUB_LIB_SPEC}" + if test x"${TK_BIN_DIR}" != x ; then + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TK_STUB_LIB_SPEC}" + fi + eval eval "PKG_LIB_FILE=lib${PACKAGE_LIB_PREFIX}${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" + RANLIB=: + else + eval eval "PKG_LIB_FILE=lib${PACKAGE_LIB_PREFIX}${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" + fi + # Some packages build their own stubs libraries + eval eval "PKG_STUB_LIB_FILE=lib${PACKAGE_LIB_PREFIX}${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}" + fi + + # These are escaped so that only CFLAGS is picked up at configure time. + # The other values will be substituted at make time. + CFLAGS="${CFLAGS} \${CFLAGS_DEFAULT} \${CFLAGS_WARNING}" + if test "${SHARED_BUILD}" = "1" ; then + CFLAGS="${CFLAGS} \${SHLIB_CFLAGS}" + fi + + + + + + + + + + +#-------------------------------------------------------------------- +# __CHANGE__ +# Add platform libs to LIBS or SHLIB_LD_LIBS as necessary. +#-------------------------------------------------------------------- + +#-------------------------------------------------------------------- +# Find tclsh so that we can run pkg_mkIndex to generate the pkgIndex.tcl +# file during the install process. Don't run the TCLSH_PROG through +# ${CYGPATH} because it's being used directly by make. +# Require that we use a tclsh shell version 8.2 or later since earlier +# versions have bugs in the pkg_mkIndex routine. +# Add WISH as well if this is a Tk extension. +#-------------------------------------------------------------------- + + + echo "$as_me:$LINENO: checking for tclsh" >&5 +echo $ECHO_N "checking for tclsh... $ECHO_C" >&6 + if test -f "${TCL_BIN_DIR}/Makefile" ; then + # tclConfig.sh is in Tcl build directory + if test "${TEA_PLATFORM}" = "windows"; then + TCLSH_PROG="${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}" + else + TCLSH_PROG="${TCL_BIN_DIR}/tclsh" + fi + else + # tclConfig.sh is in install location + if test "${TEA_PLATFORM}" = "windows"; then + TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}" + else + TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}.${TCL_MINOR_VERSION}${TCL_DBGX}" + fi + list="`ls -d ${TCL_BIN_DIR}/../bin 2>/dev/null` \ + `ls -d ${TCL_BIN_DIR}/.. 2>/dev/null` \ + `ls -d ${TCL_PREFIX}/bin 2>/dev/null`" + for i in $list ; do + if test -f "$i/${TCLSH_PROG}" ; then + REAL_TCL_BIN_DIR="`cd "$i"; pwd`/" + break + fi + done + TCLSH_PROG="${REAL_TCL_BIN_DIR}${TCLSH_PROG}" + fi + echo "$as_me:$LINENO: result: ${TCLSH_PROG}" >&5 +echo "${ECHO_T}${TCLSH_PROG}" >&6 + + + + echo "$as_me:$LINENO: checking for wish" >&5 +echo $ECHO_N "checking for wish... $ECHO_C" >&6 + if test -f "${TK_BIN_DIR}/Makefile" ; then + # tkConfig.sh is in Tk build directory + if test "${TEA_PLATFORM}" = "windows"; then + WISH_PROG="${TK_BIN_DIR}/wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}${EXEEXT}" + else + WISH_PROG="${TK_BIN_DIR}/wish" + fi + else + # tkConfig.sh is in install location + if test "${TEA_PLATFORM}" = "windows"; then + WISH_PROG="wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}${EXEEXT}" + else + WISH_PROG="wish${TK_MAJOR_VERSION}.${TK_MINOR_VERSION}${TK_DBGX}" + fi + list="`ls -d ${TK_BIN_DIR}/../bin 2>/dev/null` \ + `ls -d ${TK_BIN_DIR}/.. 2>/dev/null` \ + `ls -d ${TK_PREFIX}/bin 2>/dev/null`" + for i in $list ; do + if test -f "$i/${WISH_PROG}" ; then + REAL_TK_BIN_DIR="`cd "$i"; pwd`/" + break + fi + done + WISH_PROG="${REAL_TK_BIN_DIR}${WISH_PROG}" + fi + echo "$as_me:$LINENO: result: ${WISH_PROG}" >&5 +echo "${ECHO_T}${WISH_PROG}" >&6 + + + + #-------------------------------------------------------------------- + # These are for tkimgConfig.sh + #-------------------------------------------------------------------- + + # pkglibdir must be a fully qualified path and (not ${exec_prefix}/lib) + eval pkglibdir="${libdir}/tkimg${PACKAGE_VERSION}" + if test "${TCL_LIB_VERSIONS_OK}" = "ok"; then + eval tkimg_LIB_FLAG="-ltkimg${PACKAGE_VERSION}${DBGX}" + eval tkimg_STUB_LIB_FLAG="-ltkimgstub${PACKAGE_VERSION}${DBGX}" + else + eval tkimg_LIB_FLAG="-ltkimg`echo ${PACKAGE_VERSION} | tr -d .`${DBGX}" + eval tkimg_STUB_LIB_FLAG="-ltkimgstub`echo ${PACKAGE_VERSION} | tr -d .`${DBGX}" + fi + tkimg_BUILD_LIB_SPEC="-L`pwd` ${tkimg_LIB_FLAG}" + tkimg_LIB_SPEC="-L${pkglibdir} ${tkimg_LIB_FLAG}" + tkimg_BUILD_STUB_LIB_SPEC="-L`pwd` ${tkimg_STUB_LIB_FLAG}" + tkimg_STUB_LIB_SPEC="-L${pkglibdir} ${tkimg_STUB_LIB_FLAG}" + tkimg_BUILD_STUB_LIB_PATH="`pwd`/${PKG_STUB_LIB_FILE}" + tkimg_STUB_LIB_PATH="${pkglibdir}/${PKG_STUB_LIB_FILE}" + + + + + + + + + + + + + +#-------------------------------------------------------------------- +# Finally, substitute all of the various values into the Makefile. +# You may alternatively have a special pkgIndex.tcl.in or other files +# which require substituting th AC variables in. Include these here. +#-------------------------------------------------------------------- + + ac_config_files="$ac_config_files Makefile pkgIndex.tcl tkimgConfig.sh" +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, don't put newlines in cache variables' values. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +{ + (set) 2>&1 | + case `(ac_space=' '; set | grep ac_space) 2>&1` in + *ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n \ + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + ;; + esac; +} | + sed ' + t clear + : clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + : end' >>confcache +if diff $cache_file confcache >/dev/null 2>&1; then :; else + if test -w $cache_file; then + test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" + cat confcache >$cache_file + else + echo "not updating unwritable cache $cache_file" + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +# VPATH may cause trouble with some makes, so we remove $(srcdir), +# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=/{ +s/:*\$(srcdir):*/:/; +s/:*\${srcdir}:*/:/; +s/:*@srcdir@:*/:/; +s/^\([^=]*=[ ]*\):*/\1/; +s/:*$//; +s/^[^=]*=[ ]*$//; +}' +fi + +# Transform confdefs.h into DEFS. +# Protect against shell expansion while executing Makefile rules. +# Protect against Makefile macro expansion. +# +# If the first sed substitution is executed (which looks for macros that +# take arguments), then we branch to the quote section. Otherwise, +# look for a macro that doesn't take arguments. +cat >confdef2opt.sed <<\_ACEOF +t clear +: clear +s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g +t quote +s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g +t quote +d +: quote +s,[ `~#$^&*(){}\\|;'"<>?],\\&,g +s,\[,\\&,g +s,\],\\&,g +s,\$,$$,g +p +_ACEOF +# We use echo to avoid assuming a particular line-breaking character. +# The extra dot is to prevent the shell from consuming trailing +# line-breaks from the sub-command output. A line-break within +# single-quotes doesn't work because, if this script is created in a +# platform that uses two characters for line-breaks (e.g., DOS), tr +# would break. +ac_LF_and_DOT=`echo; echo .` +DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'` +rm -f confdef2opt.sed + + +ac_libobjs= +ac_ltlibobjs= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_i=`echo "$ac_i" | + sed 's/\$U\././;s/\.o$//;s/\.obj$//'` + # 2. Add them. + ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + +CFLAGS="${CFLAGS} ${CPPFLAGS}"; CPPFLAGS="" + +: ${CONFIG_STATUS=./config.status} +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 +echo "$as_me: creating $CONFIG_STATUS" >&6;} +cat >$CONFIG_STATUS <<_ACEOF +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false +SHELL=\${CONFIG_SHELL-$SHELL} +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then + set -o posix +fi +DUALCASE=1; export DUALCASE # for MKS sh + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)$' \| \ + . : '\(.\)' 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } + /^X\/\(\/\/\)$/{ s//\1/; q; } + /^X\/\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + + +# PATH needs CR, and LINENO needs CR and PATH. +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done + + ;; + esac + # We did not find ourselves, most probably we were run as `sh COMMAND' + # in which case we are not to be found in the path. + if test "x$as_myself" = x; then + as_myself=$0 + fi + if test ! -f "$as_myself"; then + { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 +echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} + { (exit 1); exit 1; }; } + fi + case $CONFIG_SHELL in + '') + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for as_base in sh bash ksh sh5; do + case $as_dir in + /*) + if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } + CONFIG_SHELL=$as_dir/$as_base + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" ${1+"$@"} + fi;; + esac + done +done +;; + esac + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line before each line; the second 'sed' does the real + # work. The second script uses 'N' to pair each line-number line + # with the numbered line, and appends trailing '-' during + # substitution so that $LINENO is not a special case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) + sed '=' <$as_myself | + sed ' + N + s,$,-, + : loop + s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + t loop + s,-$,, + s,^['$as_cr_digits']*\n,, + ' >$as_me.lineno && + chmod +x $as_me.lineno || + { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 +echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensible to this). + . ./$as_me.lineno + # Exit status is that of the last command. + exit +} + + +case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' +' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +esac + +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + # We could just check for DJGPP; but this test a) works b) is more generic + # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). + if test -f conf$$.exe; then + # Don't use ln at all; we don't have any links + as_ln_s='cp -p' + else + as_ln_s='ln -s' + fi +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.file + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_executable_p="test -f" + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +# IFS +# We need space, tab and new line, in precisely that order. +as_nl=' +' +IFS=" $as_nl" + +# CDPATH. +$as_unset CDPATH + +exec 6>&1 + +# Open the log real soon, to keep \$[0] and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. Logging --version etc. is OK. +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX +} >&5 +cat >&5 <<_CSEOF + +This file was extended by tkimg $as_me 1.4.6, which was +generated by GNU Autoconf 2.59. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +_CSEOF +echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 +echo >&5 +_ACEOF + +# Files that config.status was made for. +if test -n "$ac_config_files"; then + echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_headers"; then + echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_links"; then + echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_commands"; then + echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS +fi + +cat >>$CONFIG_STATUS <<\_ACEOF + +ac_cs_usage="\ +\`$as_me' instantiates files from templates according to the +current configuration. + +Usage: $0 [OPTIONS] [FILE]... + + -h, --help print this help, then exit + -V, --version print version number, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + +Configuration files: +$config_files + +Report bugs to ." +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF +ac_cs_version="\\ +tkimg config.status 1.4.6 +configured by $0, generated by GNU Autoconf 2.59, + with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" + +Copyright (C) 2003 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." +srcdir=$srcdir +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +# If no file are specified by the user, then we need to provide default +# value. By we need to know if files were specified by the user. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=*) + ac_option=`expr "x$1" : 'x\([^=]*\)='` + ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` + ac_shift=: + ;; + -*) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + *) # This is not an option, so the user has probably given explicit + # arguments. + ac_option=$1 + ac_need_defaults=false;; + esac + + case $ac_option in + # Handling of the options. +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --vers* | -V ) + echo "$ac_cs_version"; exit 0 ;; + --he | --h) + # Conflict between --help and --header + { { echo "$as_me:$LINENO: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&5 +echo "$as_me: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&2;} + { (exit 1); exit 1; }; };; + --help | --hel | -h ) + echo "$ac_cs_usage"; exit 0 ;; + --debug | --d* | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + CONFIG_FILES="$CONFIG_FILES $ac_optarg" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" + ac_need_defaults=false;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&5 +echo "$as_me: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&2;} + { (exit 1); exit 1; }; } ;; + + *) ac_config_targets="$ac_config_targets $1" ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF +if \$ac_cs_recheck; then + echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 + exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion +fi + +_ACEOF + + + + + +cat >>$CONFIG_STATUS <<\_ACEOF +for ac_config_target in $ac_config_targets +do + case "$ac_config_target" in + # Handling of arguments. + "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; + "pkgIndex.tcl" ) CONFIG_FILES="$CONFIG_FILES pkgIndex.tcl" ;; + "tkimgConfig.sh" ) CONFIG_FILES="$CONFIG_FILES tkimgConfig.sh" ;; + *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 +echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; + esac +done + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason to put it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Create a temporary directory, and hook for its removal unless debugging. +$debug || +{ + trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 + trap '{ (exit 1); exit 1; }' 1 2 13 15 +} + +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && + test -n "$tmp" && test -d "$tmp" +} || +{ + tmp=./confstat$$-$RANDOM + (umask 077 && mkdir $tmp) +} || +{ + echo "$me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } +} + +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF + +# +# CONFIG_FILES section. +# + +# No need to generate the scripts if there are no CONFIG_FILES. +# This happens for instance when ./config.status config.h +if test -n "\$CONFIG_FILES"; then + # Protect against being on the right side of a sed subst in config.status. + sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; + s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF +s,@SHELL@,$SHELL,;t t +s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t +s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t +s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t +s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t +s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t +s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t +s,@exec_prefix@,$exec_prefix,;t t +s,@prefix@,$prefix,;t t +s,@program_transform_name@,$program_transform_name,;t t +s,@bindir@,$bindir,;t t +s,@sbindir@,$sbindir,;t t +s,@libexecdir@,$libexecdir,;t t +s,@datadir@,$datadir,;t t +s,@sysconfdir@,$sysconfdir,;t t +s,@sharedstatedir@,$sharedstatedir,;t t +s,@localstatedir@,$localstatedir,;t t +s,@libdir@,$libdir,;t t +s,@includedir@,$includedir,;t t +s,@oldincludedir@,$oldincludedir,;t t +s,@infodir@,$infodir,;t t +s,@mandir@,$mandir,;t t +s,@build_alias@,$build_alias,;t t +s,@host_alias@,$host_alias,;t t +s,@target_alias@,$target_alias,;t t +s,@DEFS@,$DEFS,;t t +s,@ECHO_C@,$ECHO_C,;t t +s,@ECHO_N@,$ECHO_N,;t t +s,@ECHO_T@,$ECHO_T,;t t +s,@LIBS@,$LIBS,;t t +s,@CYGPATH@,$CYGPATH,;t t +s,@EXEEXT@,$EXEEXT,;t t +s,@PKG_LIB_FILE@,$PKG_LIB_FILE,;t t +s,@PKG_STUB_LIB_FILE@,$PKG_STUB_LIB_FILE,;t t +s,@PKG_STUB_SOURCES@,$PKG_STUB_SOURCES,;t t +s,@PKG_STUB_OBJECTS@,$PKG_STUB_OBJECTS,;t t +s,@PKG_TCL_SOURCES@,$PKG_TCL_SOURCES,;t t +s,@PKG_HEADERS@,$PKG_HEADERS,;t t +s,@PKG_INCLUDES@,$PKG_INCLUDES,;t t +s,@PKG_LIBS@,$PKG_LIBS,;t t +s,@PKG_CFLAGS@,$PKG_CFLAGS,;t t +s,@PACKAGE_TCLNAME@,$PACKAGE_TCLNAME,;t t +s,@TCL_VERSION@,$TCL_VERSION,;t t +s,@TCL_PATCH_LEVEL@,$TCL_PATCH_LEVEL,;t t +s,@TCL_BIN_DIR@,$TCL_BIN_DIR,;t t +s,@TCL_SRC_DIR@,$TCL_SRC_DIR,;t t +s,@TCL_LIB_FILE@,$TCL_LIB_FILE,;t t +s,@TCL_LIB_FLAG@,$TCL_LIB_FLAG,;t t +s,@TCL_LIB_SPEC@,$TCL_LIB_SPEC,;t t +s,@TCL_STUB_LIB_FILE@,$TCL_STUB_LIB_FILE,;t t +s,@TCL_STUB_LIB_FLAG@,$TCL_STUB_LIB_FLAG,;t t +s,@TCL_STUB_LIB_SPEC@,$TCL_STUB_LIB_SPEC,;t t +s,@CC@,$CC,;t t +s,@CFLAGS@,$CFLAGS,;t t +s,@LDFLAGS@,$LDFLAGS,;t t +s,@CPPFLAGS@,$CPPFLAGS,;t t +s,@ac_ct_CC@,$ac_ct_CC,;t t +s,@OBJEXT@,$OBJEXT,;t t +s,@CLEANFILES@,$CLEANFILES,;t t +s,@TCL_LIBS@,$TCL_LIBS,;t t +s,@TCL_DEFS@,$TCL_DEFS,;t t +s,@TCL_EXTRA_CFLAGS@,$TCL_EXTRA_CFLAGS,;t t +s,@TCL_LD_FLAGS@,$TCL_LD_FLAGS,;t t +s,@TCL_SHLIB_LD_LIBS@,$TCL_SHLIB_LD_LIBS,;t t +s,@TK_VERSION@,$TK_VERSION,;t t +s,@TK_BIN_DIR@,$TK_BIN_DIR,;t t +s,@TK_SRC_DIR@,$TK_SRC_DIR,;t t +s,@TK_LIB_FILE@,$TK_LIB_FILE,;t t +s,@TK_LIB_FLAG@,$TK_LIB_FLAG,;t t +s,@TK_LIB_SPEC@,$TK_LIB_SPEC,;t t +s,@TK_STUB_LIB_FILE@,$TK_STUB_LIB_FILE,;t t +s,@TK_STUB_LIB_FLAG@,$TK_STUB_LIB_FLAG,;t t +s,@TK_STUB_LIB_SPEC@,$TK_STUB_LIB_SPEC,;t t +s,@TK_LIBS@,$TK_LIBS,;t t +s,@TK_XINCLUDES@,$TK_XINCLUDES,;t t +s,@CPP@,$CPP,;t t +s,@INSTALL@,$INSTALL,;t t +s,@INSTALL_DATA_DIR@,$INSTALL_DATA_DIR,;t t +s,@INSTALL_DATA@,$INSTALL_DATA,;t t +s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t +s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t +s,@INSTALL_LIBRARY@,$INSTALL_LIBRARY,;t t +s,@SET_MAKE@,$SET_MAKE,;t t +s,@RANLIB@,$RANLIB,;t t +s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t +s,@EGREP@,$EGREP,;t t +s,@MATH_LIBS@,$MATH_LIBS,;t t +s,@PKG_SOURCES@,$PKG_SOURCES,;t t +s,@PKG_OBJECTS@,$PKG_OBJECTS,;t t +s,@TCL_INCLUDES@,$TCL_INCLUDES,;t t +s,@TK_INCLUDES@,$TK_INCLUDES,;t t +s,@TCL_THREADS@,$TCL_THREADS,;t t +s,@SHARED_BUILD@,$SHARED_BUILD,;t t +s,@AR@,$AR,;t t +s,@ac_ct_AR@,$ac_ct_AR,;t t +s,@CELIB_DIR@,$CELIB_DIR,;t t +s,@RC@,$RC,;t t +s,@ac_ct_RC@,$ac_ct_RC,;t t +s,@CFLAGS_DEBUG@,$CFLAGS_DEBUG,;t t +s,@CFLAGS_OPTIMIZE@,$CFLAGS_OPTIMIZE,;t t +s,@CFLAGS_WARNING@,$CFLAGS_WARNING,;t t +s,@STLIB_LD@,$STLIB_LD,;t t +s,@SHLIB_LD@,$SHLIB_LD,;t t +s,@SHLIB_LD_LIBS@,$SHLIB_LD_LIBS,;t t +s,@SHLIB_CFLAGS@,$SHLIB_CFLAGS,;t t +s,@LD_LIBRARY_PATH_VAR@,$LD_LIBRARY_PATH_VAR,;t t +s,@CFLAGS_DEFAULT@,$CFLAGS_DEFAULT,;t t +s,@LDFLAGS_DEFAULT@,$LDFLAGS_DEFAULT,;t t +s,@TCL_DBGX@,$TCL_DBGX,;t t +s,@MAKE_LIB@,$MAKE_LIB,;t t +s,@MAKE_SHARED_LIB@,$MAKE_SHARED_LIB,;t t +s,@MAKE_STATIC_LIB@,$MAKE_STATIC_LIB,;t t +s,@MAKE_STUB_LIB@,$MAKE_STUB_LIB,;t t +s,@RANLIB_STUB@,$RANLIB_STUB,;t t +s,@VC_MANIFEST_EMBED_DLL@,$VC_MANIFEST_EMBED_DLL,;t t +s,@VC_MANIFEST_EMBED_EXE@,$VC_MANIFEST_EMBED_EXE,;t t +s,@TCLSH_PROG@,$TCLSH_PROG,;t t +s,@WISH_PROG@,$WISH_PROG,;t t +s,@tkimg_BUILD_LIB_SPEC@,$tkimg_BUILD_LIB_SPEC,;t t +s,@tkimg_LIB_SPEC@,$tkimg_LIB_SPEC,;t t +s,@tkimg_BUILD_STUB_LIB_SPEC@,$tkimg_BUILD_STUB_LIB_SPEC,;t t +s,@tkimg_STUB_LIB_SPEC@,$tkimg_STUB_LIB_SPEC,;t t +s,@tkimg_BUILD_STUB_LIB_PATH@,$tkimg_BUILD_STUB_LIB_PATH,;t t +s,@tkimg_STUB_LIB_PATH@,$tkimg_STUB_LIB_PATH,;t t +s,@MAJOR_VERSION@,$MAJOR_VERSION,;t t +s,@MINOR_VERSION@,$MINOR_VERSION,;t t +s,@PATCHLEVEL@,$PATCHLEVEL,;t t +s,@LIBOBJS@,$LIBOBJS,;t t +s,@LTLIBOBJS@,$LTLIBOBJS,;t t +CEOF + +_ACEOF + + cat >>$CONFIG_STATUS <<\_ACEOF + # Split the substitutions into bite-sized pieces for seds with + # small command number limits, like on Digital OSF/1 and HP-UX. + ac_max_sed_lines=48 + ac_sed_frag=1 # Number of current file. + ac_beg=1 # First line for current file. + ac_end=$ac_max_sed_lines # Line after last line for current file. + ac_more_lines=: + ac_sed_cmds= + while $ac_more_lines; do + if test $ac_beg -gt 1; then + sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag + else + sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag + fi + if test ! -s $tmp/subs.frag; then + ac_more_lines=false + else + # The purpose of the label and of the branching condition is to + # speed up the sed processing (if there are no `@' at all, there + # is no need to browse any of the substitutions). + # These are the two extra sed commands mentioned above. + (echo ':t + /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed + if test -z "$ac_sed_cmds"; then + ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" + else + ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" + fi + ac_sed_frag=`expr $ac_sed_frag + 1` + ac_beg=$ac_end + ac_end=`expr $ac_end + $ac_max_sed_lines` + fi + done + if test -z "$ac_sed_cmds"; then + ac_sed_cmds=cat + fi +fi # test -n "$CONFIG_FILES" + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case $ac_file in + - | *:- | *:-:* ) # input from stdin + cat >$tmp/stdin + ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + * ) ac_file_in=$ac_file.in ;; + esac + + # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. + ac_dir=`(dirname "$ac_file") 2>/dev/null || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + { if $as_mkdir_p; then + mkdir -p "$ac_dir" + else + as_dir="$ac_dir" + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + { (exit 1); exit 1; }; }; } + + ac_builddir=. + +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi + +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac + +# Do not use `cd foo && pwd` to compute absolute paths, because +# the directories may not exist. +case `pwd` in +.) ac_abs_builddir="$ac_dir";; +*) + case "$ac_dir" in + .) ac_abs_builddir=`pwd`;; + [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; + *) ac_abs_builddir=`pwd`/"$ac_dir";; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_builddir=${ac_top_builddir}.;; +*) + case ${ac_top_builddir}. in + .) ac_abs_top_builddir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; + *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_srcdir=$ac_srcdir;; +*) + case $ac_srcdir in + .) ac_abs_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; + *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_srcdir=$ac_top_srcdir;; +*) + case $ac_top_srcdir in + .) ac_abs_top_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; + *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; + esac;; +esac + + + + if test x"$ac_file" != x-; then + { echo "$as_me:$LINENO: creating $ac_file" >&5 +echo "$as_me: creating $ac_file" >&6;} + rm -f "$ac_file" + fi + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + if test x"$ac_file" = x-; then + configure_input= + else + configure_input="$ac_file. " + fi + configure_input=$configure_input"Generated from `echo $ac_file_in | + sed 's,.*/,,'` by configure." + + # First look for the input files in the build tree, otherwise in the + # src tree. + ac_file_inputs=`IFS=: + for f in $ac_file_in; do + case $f in + -) echo $tmp/stdin ;; + [\\/$]*) + # Absolute (can't be DOS-style, as IFS=:) + test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + echo "$f";; + *) # Relative + if test -f "$f"; then + # Build tree + echo "$f" + elif test -f "$srcdir/$f"; then + # Source tree + echo "$srcdir/$f" + else + # /dev/null tree + { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + fi;; + esac + done` || { (exit 1); exit 1; } +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF + sed "$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s,@configure_input@,$configure_input,;t t +s,@srcdir@,$ac_srcdir,;t t +s,@abs_srcdir@,$ac_abs_srcdir,;t t +s,@top_srcdir@,$ac_top_srcdir,;t t +s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t +s,@builddir@,$ac_builddir,;t t +s,@abs_builddir@,$ac_abs_builddir,;t t +s,@top_builddir@,$ac_top_builddir,;t t +s,@abs_top_builddir@,$ac_abs_top_builddir,;t t +" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out + rm -f $tmp/stdin + if test x"$ac_file" != x-; then + mv $tmp/out $ac_file + else + cat $tmp/out + rm -f $tmp/out + fi + +done +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF + +{ (exit 0); exit 0; } +_ACEOF +chmod +x $CONFIG_STATUS +ac_clean_files=$ac_clean_files_save + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || { (exit 1); exit 1; } +fi + + +#-------------------------------------------------------------------- diff --git a/base/configure.in b/base/configure.in new file mode 100755 index 0000000..f320b4d --- /dev/null +++ b/base/configure.in @@ -0,0 +1,176 @@ +dnl +dnl Process this file with autoconf to produce a configure script. +dnl +AC_REVISION($Id: configure.in 405 2016-05-24 18:51:34Z obermeier $) + +#-------------------------------------------------------------------- +# Configure script for package 'tkimg', as distributed at November 20, 2001. +# TEA compliant. +#-------------------------------------------------------------------- + +AC_INIT([tkimg],[1.4.6]) + +TEA_INIT([3.9]) + +AC_CONFIG_AUX_DIR(../tclconfig) + +PACKAGE_TCLNAME="img::base" +AC_SUBST(PACKAGE_TCLNAME) + +#-------------------------------------------------------------------- +# Load the tclConfig.sh file +# Load the tkConfig.sh file +#-------------------------------------------------------------------- + +TEA_PATH_TCLCONFIG +TEA_LOAD_TCLCONFIG + +TEA_PATH_TKCONFIG +TEA_LOAD_TKCONFIG + +#----------------------------------------------------------------------- +# Handle the --prefix=... option by defaulting to what Tcl gave. +# Must be called after TEA_LOAD_TCLCONFIG and before TEA_SETUP_COMPILER. +#----------------------------------------------------------------------- + +TEA_PREFIX + +#----------------------------------------------------------------------- +# Standard compiler checks. +# This sets up CC by using the CC env var, or looks for gcc otherwise. +# This also calls AC_PROG_CC, AC_PROG_INSTALL and a few others to create +# the basic setup necessary to compile executables. +#----------------------------------------------------------------------- + +TEA_SETUP_COMPILER + +#----------------------------------------------------------------------- +# Specify the C source files to compile in TEA_ADD_SOURCES, +# public headers that need to be installed in TEA_ADD_HEADERS, +# stub library C source files to compile in TEA_ADD_STUB_SOURCES, +# and runtime Tcl library files in TEA_ADD_TCL_SOURCES. +# This defines PKG(_STUB)_SOURCES, PKG(_STUB)_OBJECTS, PKG_HEADERS +# and PKG_TCL_SOURCES. +#----------------------------------------------------------------------- + +TEA_ADD_SOURCES([tkimg.c tkimgIO.c tkimgPPB.c tkimgUtils.c tkimgStubInit.c]) +TEA_ADD_HEADERS([tkimg.h tkimgDecls.h]) +TEA_ADD_INCLUDES([]) +TEA_ADD_LIBS([]) +TEA_ADD_CFLAGS([]) +TEA_ADD_STUB_SOURCES([tkimgStubLib.c]) +TEA_ADD_SOURCES([tkimgStubLib.c]) +TEA_ADD_TCL_SOURCES([]) + +#-------------------------------------------------------------------- +# __CHANGE__ +# Choose which headers you need. Extension authors should try very +# hard to only rely on the Tcl public header files. Internal headers +# contain private data structures and are subject to change without +# notice. +# This MUST be called after TEA_LOAD_TCLCONFIG / TEA_LOAD_TKCONFIG +#-------------------------------------------------------------------- + +TEA_PUBLIC_TCL_HEADERS +TEA_PUBLIC_TK_HEADERS + +#-------------------------------------------------------------------- +# A few miscellaneous platform-specific items: +# +# Windows creates a few extra files that need to be cleaned up. +# We can add more files to clean if our extension creates any extra +# files in the future. +# +# Define any extra compiler flags in the PACKAGE_CFLAGS variable. +# These will be appended to the current set of compiler flags for +# your system. +#-------------------------------------------------------------------- + +if test "${TEA_PLATFORM}" = "windows" ; then + CLEANFILES="*.lib *.dll *.exp *.ilk *.pdb vc*.pch" +else + CLEANFILES="" +fi +AC_SUBST(CLEANFILES) + +#-------------------------------------------------------------------- +# Check whether --enable-threads or --disable-threads was given. +# So far only Tcl responds to this one. +#-------------------------------------------------------------------- + +TEA_ENABLE_THREADS + +#-------------------------------------------------------------------- +# The statement below defines a collection of symbols related to +# building as a shared library instead of a static library. +#-------------------------------------------------------------------- + +TEA_ENABLE_SHARED + +#-------------------------------------------------------------------- +# This macro figures out what flags to use with the compiler/linker +# when building shared/static debug/optimized objects. This information +# can be taken from the tclConfig.sh file, but this figures it all out. +#-------------------------------------------------------------------- + +TEA_CONFIG_CFLAGS + +#-------------------------------------------------------------------- +# Set the default compiler switches based on the --enable-symbols option. +#-------------------------------------------------------------------- + +TEA_ENABLE_SYMBOLS + +#-------------------------------------------------------------------- +# For Unix/Tk builds, make sure that the X libraries/headers are found. +# This must be called after TEA_CONFIG_CFLAGS as it adjusts LIBS. +#-------------------------------------------------------------------- + +# See [Bug #82910] +#TEA_PATH_X + +#-------------------------------------------------------------------- +# Everyone should be linking against the Tcl stub library. If you +# can't for some reason, remove this definition. If you aren't using +# stubs, you also need to modify the SHLIB_LD_LIBS setting below to +# link against the non-stubbed Tcl library. +#-------------------------------------------------------------------- + +AC_DEFINE(USE_TCL_STUBS) +AC_DEFINE(USE_TK_STUBS) + +#-------------------------------------------------------------------- +# This macro generates a line to use when building a library. It +# depends on values set by the TEA_ENABLE_SHARED, TEA_ENABLE_SYMBOLS, +# and TEA_LOAD_TCLCONFIG macros above. +#-------------------------------------------------------------------- + +TEA_MAKE_LIB + +#-------------------------------------------------------------------- +# __CHANGE__ +# Add platform libs to LIBS or SHLIB_LD_LIBS as necessary. +#-------------------------------------------------------------------- + +#-------------------------------------------------------------------- +# Find tclsh so that we can run pkg_mkIndex to generate the pkgIndex.tcl +# file during the install process. Don't run the TCLSH_PROG through +# ${CYGPATH} because it's being used directly by make. +# Require that we use a tclsh shell version 8.2 or later since earlier +# versions have bugs in the pkg_mkIndex routine. +# Add WISH as well if this is a Tk extension. +#-------------------------------------------------------------------- + +TEA_PROG_TCLSH +TEA_PROG_WISH +TEA_EXPORT_CONFIG(tkimg) + +#-------------------------------------------------------------------- +# Finally, substitute all of the various values into the Makefile. +# You may alternatively have a special pkgIndex.tcl.in or other files +# which require substituting th AC variables in. Include these here. +#-------------------------------------------------------------------- + +AC_OUTPUT([Makefile pkgIndex.tcl tkimgConfig.sh]) + +#-------------------------------------------------------------------- diff --git a/base/pkgIndex.tcl.in b/base/pkgIndex.tcl.in new file mode 100755 index 0000000..d7fc46f --- /dev/null +++ b/base/pkgIndex.tcl.in @@ -0,0 +1,38 @@ +# -*- tcl -*- Tcl package index file +# --- --- --- Handcrafted, final generation by configure. +# +# $Id: pkgIndex.tcl.in 209 2009-03-03 17:19:05Z nijtmans $ + +package ifneeded @PACKAGE_TCLNAME@ @PACKAGE_VERSION@ [list load [file join $dir @PKG_LIB_FILE@]] + +# Compatibility hack. When asking for the old name of the package +# then load all format handlers and base libraries provided by tkImg. +# Actually we ask only for the format handlers, the required base +# packages will be loaded automatically through the usual package +# mechanism. + +# When reading images without specifying it's format (option -format), +# the available formats are tried in reversed order as listed here. +# Therefore file formats with some "magic" identifier, which can be +# recognized safely, should be added at the end of this list. + +package ifneeded Img @PACKAGE_VERSION@ { + package require img::window + package require img::tga + package require img::ico + package require img::pcx + package require img::sgi + package require img::sun + package require img::xbm + package require img::xpm + package require img::ps + package require img::jpeg + package require img::png + package require img::tiff + package require img::bmp + package require img::ppm + package require img::gif + package require img::pixmap + package provide Img @PACKAGE_VERSION@ +} + diff --git a/base/tkimg.c b/base/tkimg.c new file mode 100755 index 0000000..2f7f11d --- /dev/null +++ b/base/tkimg.c @@ -0,0 +1,219 @@ +/* + * tkimg.c -- + * + * Generic interface to XML parsers. + * + * Copyright (c) 2002 Andreas Kupries + * + * Zveno Pty Ltd makes this software and associated documentation + * available free of charge for any purpose. You may make copies + * of the software but you must include all of this notice on any copy. + * + * Zveno Pty Ltd does not warrant that this software is error free + * or fit for any purpose. Zveno Pty Ltd disclaims any liability for + * all claims, expenses, losses, damages and costs any user may incur + * as a result of using, copying or modifying the software. + * + * $Id: tkimg.c 274 2010-06-28 13:23:34Z nijtmans $ + * + */ + +#include "tkimg.h" + +MODULE_SCOPE const TkimgStubs tkimgStubs; + +/* + * Declarations for externally visible functions. + */ + +#ifdef ALLOW_B64 +static int tob64(void *clientData, Tcl_Interp *interp, + int argc, Tcl_Obj *const objv[]); +static int fromb64(void *clientData, Tcl_Interp *interp, + int argc, Tcl_Obj *const objv[]); +#endif + +/* + *---------------------------------------------------------------------------- + * + * Tkimg_Init -- + * + * Initialisation routine for loadable module + * + * Results: + * None. + * + * Side effects: + * Creates commands in the interpreter, + * loads xml package. + * + *---------------------------------------------------------------------------- + */ + +int Tkimg_Init( + Tcl_Interp *interp /* Interpreter to initialise. */ +) { + + if (!Tcl_InitStubs(interp, "8.3", 0)) { + return TCL_ERROR; + } + if (!Tk_InitStubs(interp, "8.3", 0)) { + return TCL_ERROR; + } + TkimgInitUtilities(interp); +#ifdef ALLOW_B64 /* Undocumented feature */ + Tcl_CreateObjCommand(interp, "img_to_base64", tob64, NULL, NULL); + Tcl_CreateObjCommand(interp, "img_from_base64", fromb64, NULL, NULL); +#endif + + if (Tcl_PkgProvideEx(interp, PACKAGE_TCLNAME, PACKAGE_VERSION, + (void *)&tkimgStubs) != TCL_OK + ) { + return TCL_ERROR; + } + + return TCL_OK; +} + +/* + *---------------------------------------------------------------------------- + * + * Tkimg_SafeInit -- + * + * Initialisation routine for loadable module in a safe interpreter. + * + * Results: + * None. + * + * Side effects: + * Creates commands in the interpreter, + * loads xml package. + * + *---------------------------------------------------------------------------- + */ + +int Tkimg_SafeInit( + Tcl_Interp *interp /* Interpreter to initialise. */ +) { + return Tkimg_Init(interp); +} + +/* + *------------------------------------------------------------------------- + * tob64 -- + * This function converts the contents of a file into a base-64 + * encoded string. + * + * Results: + * none + * + * Side effects: + * none + * + *------------------------------------------------------------------------- + */ + +#ifdef ALLOW_B64 +int tob64( + void *clientData, + Tcl_Interp *interp, + int argc, + Tcl_Obj *const objv[] +) { + Tcl_DString dstring; + tkimg_MFile handle; + Tcl_Channel chan; + char buffer[1024]; + int len; + + if (argc != 2) { + Tcl_WrongNumArgs(interp, 1, objv, "filename"); + return TCL_ERROR; + } + + chan = tkimg_OpenFileChannel(interp, Tcl_GetStringFromObj(objv[1], &len), 0); + if (!chan) { + return TCL_ERROR; + } + + Tcl_DStringInit(&dstring); + tkimg_WriteInit(&dstring, &handle); + + while ((len = Tcl_Read(chan, buffer, 1024)) == 1024) { + tkimg_Write(&handle, buffer, 1024); + } + if (len > 0) { + tkimg_Write(&handle, buffer, len); + } + if ((Tcl_Close(interp, chan) == TCL_ERROR) || (len < 0)) { + Tcl_DStringFree(&dstring); + Tcl_AppendResult(interp, Tcl_GetStringFromObj(objv[1], &len), + ": ", Tcl_PosixError(interp), NULL); + return TCL_ERROR; + } + tkimg_Putc(IMG_DONE, &handle); + + Tcl_DStringResult(interp, &dstring); + return TCL_OK; +} + +/* + *------------------------------------------------------------------------- + * fromb64 -- + * This function converts a base-64 encoded string into binary form, + * which is written to a file. + * + * Results: + * none + * + * Side effects: + * none + * + *------------------------------------------------------------------------- + */ + +int fromb64( + void *clientData, + Tcl_Interp *interp, + int argc, + Tcl_Obj *const objv[] +) { + tkimg_MFile handle; + Tcl_Channel chan; + char buffer[1024]; + int len; + + if (argc != 3) { + Tcl_WrongNumArgs(interp, 1, objv, "filename data"); + return TCL_ERROR; + } + + chan = tkimg_OpenFileChannel(interp, Tcl_GetStringFromObj(objv[1], &len), 0644); + if (!chan) { + return TCL_ERROR; + } + + handle.data = Tcl_GetStringFromObj(objv[2], &handle.length); + handle.state = 0; + + while ((len = tkimg_Read(&handle, buffer, 1024)) == 1024) { + if (Tcl_Write(chan, buffer, 1024) != 1024) { + goto writeerror; + } + } + if (len > 0) { + if (Tcl_Write(chan, buffer, len) != len) { + goto writeerror; + } + } + if (Tcl_Close(interp, chan) == TCL_ERROR) { + return TCL_ERROR; + } + return TCL_OK; + +writeerror: + Tcl_AppendResult(interp, Tcl_GetStringFromObj(objv[1], &len), ": ", + Tcl_PosixError(interp), NULL); + return TCL_ERROR; +} +#endif diff --git a/base/tkimg.decls b/base/tkimg.decls new file mode 100755 index 0000000..30beb20 --- /dev/null +++ b/base/tkimg.decls @@ -0,0 +1,96 @@ +# tkimg.decls -- -*- tcl -*- +# +# This file contains the declarations for all supported public functions +# that are exported by the TKIMG library via the stubs table. This file +# is used to generate the tkimgDecls.h/tkimgStubsLib.c/tkimgStubsInit.c +# files. +# + +# Declare each of the functions in the public BLT interface. Note that +# the an index should never be reused for a different function in order +# to preserve backwards compatibility. + +library tkimg + +# Define the TKIMG interface: + +interface tkimg +scspec TKIMGAPI + +######################################################################### +### Reading and writing image data from channels and/or strings. + +declare 0 { + Tcl_Channel tkimg_OpenFileChannel(Tcl_Interp *interp, + const char *fileName, int permissions) +} +declare 1 { + int tkimg_ReadInit(Tcl_Obj *data, int c, tkimg_MFile *handle) +} +declare 2 { + void tkimg_WriteInit(Tcl_DString *buffer, tkimg_MFile *handle) +} +declare 3 { + int tkimg_Getc(tkimg_MFile *handle) +} +declare 4 { + int tkimg_Read(tkimg_MFile *handle, char *dst, int count) +} +declare 5 { + int tkimg_Putc(int c, tkimg_MFile *handle) +} +declare 6 { + int tkimg_Write(tkimg_MFile *handle, const char *src, int count) +} +declare 7 { + void tkimg_ReadBuffer(int onOff) +} + +######################################################################### +### Specialized put block handling transparency + +declare 10 { + int tkimg_PhotoPutBlock(Tcl_Interp *interp, Tk_PhotoHandle handle, + Tk_PhotoImageBlock *blockPtr, int x, int y, int width, int height, int flags) +} +declare 11 { + int tkimg_PhotoExpand(Tcl_Interp *interp, Tk_PhotoHandle handle, + int width, int height) +} +declare 12 { + int tkimg_PhotoSetSize(Tcl_Interp *interp, Tk_PhotoHandle handle, + int width, int height) +} + +######################################################################### +### Utilities to help handling the differences in 8.3.2 and 8.2 image +### types. Not used any more. + +declare 20 { + void tkimg_FixChanMatchProc(Tcl_Interp **interp, Tcl_Channel *chan, + const char **file, Tcl_Obj **format, int **width, int **height) +} +declare 21 { + void tkimg_FixObjMatchProc(Tcl_Interp **interp, Tcl_Obj **data, + Tcl_Obj **format, int **width, int **height) +} +declare 22 { + void tkimg_FixStringWriteProc(Tcl_DString *data, Tcl_Interp **interp, + Tcl_DString **dataPtr, Tcl_Obj **format, Tk_PhotoImageBlock **blockPtr) +} + +######################################################################### +### Like the core functions, except that they accept objPtr == NULL. +### The byte array function also handles both UTF and non-UTF cores. + +declare 30 { + const char *tkimg_GetStringFromObj(Tcl_Obj *objPtr, int *lengthPtr) +} +declare 31 { + unsigned char *tkimg_GetByteArrayFromObj(Tcl_Obj *objPtr, int *lengthPtr) +} +declare 32 { + int tkimg_ListObjGetElements(Tcl_Interp *interp, Tcl_Obj *objPtr, int *argc, Tcl_Obj ***argv) +} + +######################################################################### diff --git a/base/tkimg.h b/base/tkimg.h new file mode 100755 index 0000000..513a707 --- /dev/null +++ b/base/tkimg.h @@ -0,0 +1,141 @@ +/* + * tkimg.h -- + * + * Interface to tkimg Base package. + * + * Copyright (c) 2002 Andreas Kupries + * + * Zveno Pty Ltd makes this software and associated documentation + * available free of charge for any purpose. You may make copies + * of the software but you must include all of this notice on any copy. + * + * Zveno Pty Ltd does not warrant that this software is error free + * or fit for any purpose. Zveno Pty Ltd disclaims any liability for + * all claims, expenses, losses, damages and costs any user may incur + * as a result of using, copying or modifying the software. + * + * $Id: tkimg.h 266 2010-06-03 19:48:13Z nijtmans $ + * + */ + +#ifndef __TKIMG_H__ +#define __TKIMG_H__ + +#ifdef _MSC_VER +#pragma warning(disable:4244) /* '=' : conversion from '__int64' to 'int', possible loss of data */ +#pragma warning(disable:4761) /* integral size mismatch in argument; conversion supplied */ +#endif + +#include /* stdout, and other definitions */ +#include +#include +#include +#include + +/* + * On a few systems, type boolean and/or its values FALSE, TRUE may appear + * in standard header files. Or you may have conflicts with application- + * specific header files that you want to include together with these files. + * Defining HAVE_BOOLEAN before including tkimg.h should make it work. + */ + +/* On windows use the boolean definition from its headers to prevent + * any conflicts should a user of this header use "windows.h". Without + * this we will have/get conflicting definitions of 'boolean' ('int' + * here, 'unsigned' char for windows) + */ + +#ifndef HAVE_BOOLEAN +#define HAVE_BOOLEAN +# ifndef __RPCNDR_H__ /* don't conflict if rpcndr.h already read */ +#if defined(_WINDOWS) || defined(WIN32) || defined(_WIN32) || defined(__WIN32__) || defined(_Windows) +typedef unsigned char boolean; +#else +typedef int boolean; +#endif +#endif +#endif + +/* + * Used to block the rest of this header file from resource compilers so + * we can just get the version info. + */ +#ifndef RC_INVOKED + +/* TIP 27 update. If CONST84 is not defined we are compiling against a + * core before 8.4 and have to disable some CONST'ness. + */ + +#ifndef CONST84 +# define CONST84 +#endif +#ifndef CONST86 +# define CONST86 +#endif + +#ifndef TK_PHOTO_COMPOSITE_OVERLAY +# define TK_PHOTO_COMPOSITE_OVERLAY 0 +#endif +#ifndef TK_PHOTO_COMPOSITE_SET +# define TK_PHOTO_COMPOSITE_SET 1 +#endif + +#include "tkimgDecls.h" + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* + *---------------------------------------------------------------------------- + * C API for Tkimg generic layer + *---------------------------------------------------------------------------- + */ + +#define IMG_SPECIAL (1<<8) +#define IMG_PAD (IMG_SPECIAL+1) +#define IMG_SPACE (IMG_SPECIAL+2) +#define IMG_BAD (IMG_SPECIAL+3) +#define IMG_DONE (IMG_SPECIAL+4) +#define IMG_CHAN (IMG_SPECIAL+5) +#define IMG_STRING (IMG_SPECIAL+6) + +/* + * The variable "tkimg_initialized" contains flags indicating which + * version of Tcl or Perl we are running: + * + * IMG_TCL Tcl + * IMG_PERL perl + * IMG_COMPOSITE Tcl 8.4 or higher + * IMG_NOPANIC Tcl 8.5 or higher + * + * These flags will be determined at runtime (except the IMG_PERL + * flag, for now), so we can use the same dynamic library for all + * Tcl/Tk versions (and for Perl/Tk in the future). + */ + +MODULE_SCOPE int tkimg_initialized; + +#define IMG_TCL (1<<9) +#define IMG_PERL (1<<11) +#define IMG_COMPOSITE (1<<14) +#define IMG_NOPANIC (1<<15) + +MODULE_SCOPE int TkimgInitUtilities(Tcl_Interp* interp); + +/* + *---------------------------------------------------------------------------- + * Function prototypes for stub initialization. + *---------------------------------------------------------------------------- + */ + +const char * +Tkimg_InitStubs(Tcl_Interp *interp, const char *version, int exact); + +#endif /* RC_INVOKED */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __TKIMG_H__ */ diff --git a/base/tkimgConfig.sh.in b/base/tkimgConfig.sh.in new file mode 100755 index 0000000..a988f76 --- /dev/null +++ b/base/tkimgConfig.sh.in @@ -0,0 +1,57 @@ +# tkimgConfig.sh -- +# +# This shell script (for sh) is generated automatically by tkimg's +# configure script. It will create shell variables for most of +# the configuration options discovered by the configure script. +# This script is intended to be included by the configure scripts +# for tkimg extensions so that they don't have to figure this all +# out for themselves. This file does not duplicate information +# already provided by tclConfig.sh, so you may need to use that +# file in addition to this one. +# +# The information in this file is specific to a single platform. + +# tkimg's version number. +tkimg_VERSION='@PACKAGE_VERSION@' +tkimg_MAJOR_VERSION='@MAJOR_VERSION@' +tkimg_MINOR_VERSION='@MINOR_VERSION@' +tkimg_RELEASE_LEVEL='@PATCHLEVEL@' + +# The name of the tkimg library (may be either a .a file or a shared library): +tkimg_LIB_FILE=@PKG_LIB_FILE@ + +# String to pass to linker to pick up the tkimg library from its +# build directory. +tkimg_BUILD_LIB_SPEC='@tkimg_BUILD_LIB_SPEC@' + +# String to pass to linker to pick up the tkimg library from its +# installed directory. +tkimg_LIB_SPEC='@tkimg_LIB_SPEC@' + +# The name of the tkimg stub library (a .a file): +tkimg_STUB_LIB_FILE=@PKG_STUB_LIB_FILE@ + +# String to pass to linker to pick up the tkimg stub library from its +# build directory. +tkimg_BUILD_STUB_LIB_SPEC='@tkimg_BUILD_STUB_LIB_SPEC@' + +# String to pass to linker to pick up the tkimg stub library from its +# installed directory. +tkimg_STUB_LIB_SPEC='@tkimg_STUB_LIB_SPEC@' + +# String to pass to linker to pick up the tkimg stub library from its +# build directory. +tkimg_BUILD_STUB_LIB_PATH='@tkimg_BUILD_STUB_LIB_PATH@' + +# String to pass to linker to pick up the tkimg stub library from its +# installed directory. +tkimg_STUB_LIB_PATH='@tkimg_STUB_LIB_PATH@' + +# Location of the top-level source directories from which tkimg +# was built. This is the directory that contains generic, unix, etc. +# If tkimg was compiled in a different place than the directory +# containing the source files, this points to the location of the +# sources, not the location where tkimg was compiled. This can +# be relative to the build directory. + +tkimg_SRC_DIR='@srcdir@' diff --git a/base/tkimgDecls.h b/base/tkimgDecls.h new file mode 100755 index 0000000..35d82f4 --- /dev/null +++ b/base/tkimgDecls.h @@ -0,0 +1,226 @@ +/* + * tkimgDecls.h -- + * + * Declarations of functions in the platform independent public TKIMG API. + * + */ + +#ifndef _TKIMGDECLS +#define _TKIMGDECLS + +/* + * WARNING: The contents of this file is automatically generated by the + * genStubs.tcl script. Any modifications to the function declarations + * below should be made in the tkimg.decls script. + */ + +#include + +#ifdef TKIMGAPI +# undef TCL_STORAGE_CLASS +# define TCL_STORAGE_CLASS DLLEXPORT +#else +# define TKIMGAPI extern +# undef USE_TKIMG_STUBS +# define USE_TKIMG_STUBS 1 +#endif + +EXTERN int Tkimg_Init(Tcl_Interp *interp); +EXTERN int Tkimg_SafeInit(Tcl_Interp *interp); + +typedef struct tkimg_MFile { + Tcl_DString *buffer; /* pointer to dynamical string */ + char *data; /* mmencoded source string */ + int c; /* bits left over from previous char */ + int state; /* decoder state (0-4 or IMG_DONE) */ + int length; /* length of physical line already written */ +} tkimg_MFile; + +/* !BEGIN!: Do not edit below this line. */ + +/* + * Exported function declarations: + */ + +/* 0 */ +TKIMGAPI Tcl_Channel tkimg_OpenFileChannel(Tcl_Interp *interp, + const char *fileName, int permissions); +/* 1 */ +TKIMGAPI int tkimg_ReadInit(Tcl_Obj *data, int c, + tkimg_MFile *handle); +/* 2 */ +TKIMGAPI void tkimg_WriteInit(Tcl_DString *buffer, + tkimg_MFile *handle); +/* 3 */ +TKIMGAPI int tkimg_Getc(tkimg_MFile *handle); +/* 4 */ +TKIMGAPI int tkimg_Read(tkimg_MFile *handle, char *dst, int count); +/* 5 */ +TKIMGAPI int tkimg_Putc(int c, tkimg_MFile *handle); +/* 6 */ +TKIMGAPI int tkimg_Write(tkimg_MFile *handle, const char *src, + int count); +/* 7 */ +TKIMGAPI void tkimg_ReadBuffer(int onOff); +/* Slot 8 is reserved */ +/* Slot 9 is reserved */ +/* 10 */ +TKIMGAPI int tkimg_PhotoPutBlock(Tcl_Interp *interp, + Tk_PhotoHandle handle, + Tk_PhotoImageBlock *blockPtr, int x, int y, + int width, int height, int flags); +/* 11 */ +TKIMGAPI int tkimg_PhotoExpand(Tcl_Interp *interp, + Tk_PhotoHandle handle, int width, int height); +/* 12 */ +TKIMGAPI int tkimg_PhotoSetSize(Tcl_Interp *interp, + Tk_PhotoHandle handle, int width, int height); +/* Slot 13 is reserved */ +/* Slot 14 is reserved */ +/* Slot 15 is reserved */ +/* Slot 16 is reserved */ +/* Slot 17 is reserved */ +/* Slot 18 is reserved */ +/* Slot 19 is reserved */ +/* 20 */ +TKIMGAPI void tkimg_FixChanMatchProc(Tcl_Interp **interp, + Tcl_Channel *chan, const char **file, + Tcl_Obj **format, int **width, int **height); +/* 21 */ +TKIMGAPI void tkimg_FixObjMatchProc(Tcl_Interp **interp, + Tcl_Obj **data, Tcl_Obj **format, + int **width, int **height); +/* 22 */ +TKIMGAPI void tkimg_FixStringWriteProc(Tcl_DString *data, + Tcl_Interp **interp, Tcl_DString **dataPtr, + Tcl_Obj **format, + Tk_PhotoImageBlock **blockPtr); +/* Slot 23 is reserved */ +/* Slot 24 is reserved */ +/* Slot 25 is reserved */ +/* Slot 26 is reserved */ +/* Slot 27 is reserved */ +/* Slot 28 is reserved */ +/* Slot 29 is reserved */ +/* 30 */ +TKIMGAPI const char * tkimg_GetStringFromObj(Tcl_Obj *objPtr, + int *lengthPtr); +/* 31 */ +TKIMGAPI unsigned char * tkimg_GetByteArrayFromObj(Tcl_Obj *objPtr, + int *lengthPtr); +/* 32 */ +TKIMGAPI int tkimg_ListObjGetElements(Tcl_Interp *interp, + Tcl_Obj *objPtr, int *argc, Tcl_Obj ***argv); + +typedef struct TkimgStubs { + int magic; + const struct TkimgStubHooks *hooks; + + Tcl_Channel (*tkimg_OpenFileChannelPtr) (Tcl_Interp *interp, const char *fileName, int permissions); /* 0 */ + int (*tkimg_ReadInitPtr) (Tcl_Obj *data, int c, tkimg_MFile *handle); /* 1 */ + void (*tkimg_WriteInitPtr) (Tcl_DString *buffer, tkimg_MFile *handle); /* 2 */ + int (*tkimg_GetcPtr) (tkimg_MFile *handle); /* 3 */ + int (*tkimg_ReadPtr) (tkimg_MFile *handle, char *dst, int count); /* 4 */ + int (*tkimg_PutcPtr) (int c, tkimg_MFile *handle); /* 5 */ + int (*tkimg_WritePtr) (tkimg_MFile *handle, const char *src, int count); /* 6 */ + void (*tkimg_ReadBufferPtr) (int onOff); /* 7 */ + void (*reserved8)(void); + void (*reserved9)(void); + int (*tkimg_PhotoPutBlockPtr) (Tcl_Interp *interp, Tk_PhotoHandle handle, Tk_PhotoImageBlock *blockPtr, int x, int y, int width, int height, int flags); /* 10 */ + int (*tkimg_PhotoExpandPtr) (Tcl_Interp *interp, Tk_PhotoHandle handle, int width, int height); /* 11 */ + int (*tkimg_PhotoSetSizePtr) (Tcl_Interp *interp, Tk_PhotoHandle handle, int width, int height); /* 12 */ + void (*reserved13)(void); + void (*reserved14)(void); + void (*reserved15)(void); + void (*reserved16)(void); + void (*reserved17)(void); + void (*reserved18)(void); + void (*reserved19)(void); + void (*tkimg_FixChanMatchProcPtr) (Tcl_Interp **interp, Tcl_Channel *chan, const char **file, Tcl_Obj **format, int **width, int **height); /* 20 */ + void (*tkimg_FixObjMatchProcPtr) (Tcl_Interp **interp, Tcl_Obj **data, Tcl_Obj **format, int **width, int **height); /* 21 */ + void (*tkimg_FixStringWriteProcPtr) (Tcl_DString *data, Tcl_Interp **interp, Tcl_DString **dataPtr, Tcl_Obj **format, Tk_PhotoImageBlock **blockPtr); /* 22 */ + void (*reserved23)(void); + void (*reserved24)(void); + void (*reserved25)(void); + void (*reserved26)(void); + void (*reserved27)(void); + void (*reserved28)(void); + void (*reserved29)(void); + const char * (*tkimg_GetStringFromObjPtr) (Tcl_Obj *objPtr, int *lengthPtr); /* 30 */ + unsigned char * (*tkimg_GetByteArrayFromObjPtr) (Tcl_Obj *objPtr, int *lengthPtr); /* 31 */ + int (*tkimg_ListObjGetElementsPtr) (Tcl_Interp *interp, Tcl_Obj *objPtr, int *argc, Tcl_Obj ***argv); /* 32 */ +} TkimgStubs; + +#ifdef __cplusplus +extern "C" { +#endif +TKIMGAPI const TkimgStubs *tkimgStubsPtr; +#ifdef __cplusplus +} +#endif + +#if defined(USE_TKIMG_STUBS) + +/* + * Inline function declarations: + */ + +#define tkimg_OpenFileChannel \ + (tkimgStubsPtr->tkimg_OpenFileChannelPtr) /* 0 */ +#define tkimg_ReadInit \ + (tkimgStubsPtr->tkimg_ReadInitPtr) /* 1 */ +#define tkimg_WriteInit \ + (tkimgStubsPtr->tkimg_WriteInitPtr) /* 2 */ +#define tkimg_Getc \ + (tkimgStubsPtr->tkimg_GetcPtr) /* 3 */ +#define tkimg_Read \ + (tkimgStubsPtr->tkimg_ReadPtr) /* 4 */ +#define tkimg_Putc \ + (tkimgStubsPtr->tkimg_PutcPtr) /* 5 */ +#define tkimg_Write \ + (tkimgStubsPtr->tkimg_WritePtr) /* 6 */ +#define tkimg_ReadBuffer \ + (tkimgStubsPtr->tkimg_ReadBufferPtr) /* 7 */ +/* Slot 8 is reserved */ +/* Slot 9 is reserved */ +#define tkimg_PhotoPutBlock \ + (tkimgStubsPtr->tkimg_PhotoPutBlockPtr) /* 10 */ +#define tkimg_PhotoExpand \ + (tkimgStubsPtr->tkimg_PhotoExpandPtr) /* 11 */ +#define tkimg_PhotoSetSize \ + (tkimgStubsPtr->tkimg_PhotoSetSizePtr) /* 12 */ +/* Slot 13 is reserved */ +/* Slot 14 is reserved */ +/* Slot 15 is reserved */ +/* Slot 16 is reserved */ +/* Slot 17 is reserved */ +/* Slot 18 is reserved */ +/* Slot 19 is reserved */ +#define tkimg_FixChanMatchProc \ + (tkimgStubsPtr->tkimg_FixChanMatchProcPtr) /* 20 */ +#define tkimg_FixObjMatchProc \ + (tkimgStubsPtr->tkimg_FixObjMatchProcPtr) /* 21 */ +#define tkimg_FixStringWriteProc \ + (tkimgStubsPtr->tkimg_FixStringWriteProcPtr) /* 22 */ +/* Slot 23 is reserved */ +/* Slot 24 is reserved */ +/* Slot 25 is reserved */ +/* Slot 26 is reserved */ +/* Slot 27 is reserved */ +/* Slot 28 is reserved */ +/* Slot 29 is reserved */ +#define tkimg_GetStringFromObj \ + (tkimgStubsPtr->tkimg_GetStringFromObjPtr) /* 30 */ +#define tkimg_GetByteArrayFromObj \ + (tkimgStubsPtr->tkimg_GetByteArrayFromObjPtr) /* 31 */ +#define tkimg_ListObjGetElements \ + (tkimgStubsPtr->tkimg_ListObjGetElementsPtr) /* 32 */ + +#endif /* defined(USE_TKIMG_STUBS) */ + +/* !END!: Do not edit above this line. */ + +#undef TCL_STORAGE_CLASS +#define TCL_STORAGE_CLASS DLLIMPORT + +#endif /* _TKIMGDECLS */ diff --git a/base/tkimgIO.c b/base/tkimgIO.c new file mode 100755 index 0000000..fa42211 --- /dev/null +++ b/base/tkimgIO.c @@ -0,0 +1,510 @@ +/* + * tkimg.c -- + * + * Generic interface to XML parsers. + * + * Copyright (c) 2002 Andreas Kupries + * + * Zveno Pty Ltd makes this software and associated documentation + * available free of charge for any purpose. You may make copies + * of the software but you must include all of this notice on any copy. + * + * Zveno Pty Ltd does not warrant that this software is error free + * or fit for any purpose. Zveno Pty Ltd disclaims any liability for + * all claims, expenses, losses, damages and costs any user may incur + * as a result of using, copying or modifying the software. + * + * $Id: tkimgIO.c 274 2010-06-28 13:23:34Z nijtmans $ + * + */ + +#include "tkimg.h" + +/* + * Prototypes for procedures defined later in this file: + */ + +/* Variables needed for optional read buffer. See tkimg_ReadBuffer. */ +#define BUFLEN 4096 +static int useReadBuf = 0; +static int bufStart = -1; +static int bufEnd = -1; +static char readBuf[BUFLEN]; + + +/* + *-------------------------------------------------------------------------- + * char64 -- + * + * This procedure converts a base64 ascii character into its binary + * equivalent. This code is a slightly modified version of the + * char64 proc in N. Borenstein's metamail decoder. + * + * Results: + * The binary value, or an error code. + * + * Side effects: + * None. + *-------------------------------------------------------------------------- + */ + +static int char64( + int c +) { + switch(c) { + case 'A': return 0; case 'B': return 1; case 'C': return 2; + case 'D': return 3; case 'E': return 4; case 'F': return 5; + case 'G': return 6; case 'H': return 7; case 'I': return 8; + case 'J': return 9; case 'K': return 10; case 'L': return 11; + case 'M': return 12; case 'N': return 13; case 'O': return 14; + case 'P': return 15; case 'Q': return 16; case 'R': return 17; + case 'S': return 18; case 'T': return 19; case 'U': return 20; + case 'V': return 21; case 'W': return 22; case 'X': return 23; + case 'Y': return 24; case 'Z': return 25; case 'a': return 26; + case 'b': return 27; case 'c': return 28; case 'd': return 29; + case 'e': return 30; case 'f': return 31; case 'g': return 32; + case 'h': return 33; case 'i': return 34; case 'j': return 35; + case 'k': return 36; case 'l': return 37; case 'm': return 38; + case 'n': return 39; case 'o': return 40; case 'p': return 41; + case 'q': return 42; case 'r': return 43; case 's': return 44; + case 't': return 45; case 'u': return 46; case 'v': return 47; + case 'w': return 48; case 'x': return 49; case 'y': return 50; + case 'z': return 51; case '0': return 52; case '1': return 53; + case '2': return 54; case '3': return 55; case '4': return 56; + case '5': return 57; case '6': return 58; case '7': return 59; + case '8': return 60; case '9': return 61; case '+': return 62; + case '/': return 63; + + case ' ': case '\t': case '\n': case '\r': case '\f': return IMG_SPACE; + case '=': return IMG_PAD; + case '\0': return IMG_DONE; + default: return IMG_BAD; + } +} + +/* + *-------------------------------------------------------------- + * + * tkimg_ReadBuffer -- + * Initialize optional read buffer. + * + * The optional read buffer may be used for compressed image file + * formats (ex. RLE), where the file has to be read byte by byte. + * This option is only available when reading from an image file, + * i.e. "image create -file ..." + * + * CAUTION: + * - Use this option only, when you do NOT use file seeks. + * - Use tkimg_ReadBuffer (1) to initialize the read buffer before usage. + * Use tkimg_ReadBuffer (0) to switch off the read buffer after usage. + * + * Results: + * None + * + * Side effects: + * Changes the static variables needed for the read buffer. + * + *-------------------------------------------------------------- + */ + +void tkimg_ReadBuffer( + int onOff +) { + useReadBuf = onOff; + if (onOff) { + memset(readBuf, 0, BUFLEN); + bufStart = -1; + bufEnd = -1; + } +} + +/* + *-------------------------------------------------------------------------- + * tkimg_Read -- + * + * This procedure returns a buffer from the stream input. This stream + * could be anything from a base-64 encoded string to a Channel. + * + * Results: + * The number of characters successfully read from the input + * + * Side effects: + * The tkimg_MFile state could change. + *-------------------------------------------------------------------------- + */ + +int tkimg_Read( + tkimg_MFile *handle /* mmdecode "file" handle */, + char *dst /* where to put the result */, + int count /* number of bytes */ +) { + register int i, c; + int bytesRead, bytesToRead; + char *dstPtr; + + switch (handle->state) { + case IMG_STRING: + if (count > handle->length) { + count = handle->length; + } + if (count) { + memcpy(dst, handle->data, count); + handle->length -= count; + handle->data += count; + } + return count; + case IMG_CHAN: + if (!useReadBuf) { + return Tcl_Read((Tcl_Channel) handle->data, dst, count); + } + dstPtr = dst; + bytesToRead = count; + bytesRead = 0; + while (bytesToRead > 0) { +#ifdef DEBUG_LOCAL + printf ("bytesToRead=%d bytesRead=%d (bufStart=%d bufEnd=%d)\n", + bytesToRead, bytesRead, bufStart, bufEnd); +#endif + if (bufStart < 0) { + bufEnd = Tcl_Read((Tcl_Channel)handle->data, readBuf, BUFLEN)-1; +#ifdef DEBUG_LOCAL + printf ("Reading new %d bytes into buffer " + "(bufStart=%d bufEnd=%d)\n", + BUFLEN, bufStart, bufEnd); +#endif + bufStart = 0; + if (bufEnd < 0) + return bufEnd; + } + if (bufStart + bytesToRead <= bufEnd +1) { +#ifdef DEBUG_LOCAL + printf("All in buffer: memcpy %d bytes\n", bytesToRead); +#endif + /* All bytes already in the buffer. Just copy them to dst. */ + memcpy(dstPtr, readBuf + bufStart, bytesToRead); + bufStart += bytesToRead; + if (bufStart > BUFLEN) + bufStart = -1; + return bytesRead + bytesToRead; + } else { +#ifdef DEBUG_LOCAL + printf("Copy rest of buffer: memcpy %d bytes\n", + bufEnd+1-bufStart); +#endif + memcpy (dstPtr, readBuf + bufStart, bufEnd+1 - bufStart); + bytesRead += (bufEnd +1 - bufStart); + bytesToRead -= (bufEnd+1 - bufStart); + bufStart = -1; + dstPtr += bytesRead; + } + } + } + + for(i = 0; i < count && (c = tkimg_Getc(handle)) != IMG_DONE; i++) { + *dst++ = c; + } + return i; +} + +/* + *-------------------------------------------------------------------------- + * + * tkimg_Getc -- + * + * This procedure returns the next input byte from a stream. This stream + * could be anything from a base-64 encoded string to a Channel. + * + * Results: + * The next byte (or IMG_DONE) is returned. + * + * Side effects: + * The tkimg_MFile state could change. + * + *-------------------------------------------------------------------------- + */ + +int tkimg_Getc( + tkimg_MFile *handle /* Input stream handle */ +) { + int c; + int result = 0; /* Initialization needed only to prevent + * gcc compiler warning */ + if (handle->state == IMG_DONE) { + return IMG_DONE; + } + + if (handle->state == IMG_STRING) { + if (!handle->length--) { + handle->state = IMG_DONE; + return IMG_DONE; + } + return *handle->data++; + } + + do { + if (!handle->length--) { + handle->state = IMG_DONE; + return IMG_DONE; + } + c = char64(*handle->data++); + } while (c == IMG_SPACE); + + if (c > IMG_SPECIAL) { + handle->state = IMG_DONE; + return IMG_DONE; + } + + switch (handle->state++) { + case 0: + handle->c = c<<2; + result = tkimg_Getc(handle); + break; + case 1: + result = handle->c | (c>>4); + handle->c = (c&0xF)<<4; + break; + case 2: + result = handle->c | (c>>2); + handle->c = (c&0x3)<<6; + break; + case 3: + result = handle->c | c; + handle->state = 0; + break; + } + return result; +} + +/* + *----------------------------------------------------------------------- + * tkimg_Write -- + * + * This procedure is invoked to put imaged data into a stream + * using tkimg_Putc. + * + * Results: + * The return value is the number of characters "written" + * + * Side effects: + * The base64 handle will change state. + * + *----------------------------------------------------------------------- + */ + +int tkimg_Write( + tkimg_MFile *handle /* mmencode "file" handle */, + const char *src /* where to get the data */, + int count /* number of bytes */ +) { + register int i; + int curcount, bufcount; + + if (handle->state == IMG_CHAN) { + return Tcl_Write((Tcl_Channel) handle->data, (char *) src, count); + } + curcount = handle->data - Tcl_DStringValue(handle->buffer); + bufcount = curcount + count + count/3 + count/52 + 1024; + + /* make sure that the DString contains enough space */ + if (bufcount >= (handle->buffer->spaceAvl)) { + Tcl_DStringSetLength(handle->buffer, bufcount + 4096); + handle->data = Tcl_DStringValue(handle->buffer) + curcount; + } + /* write the data */ + for (i=0; (istate) { + case 0: + break; + case 1: + *handle->data++ = base64_table[(handle->c<<4)&63]; + *handle->data++ = '='; *handle->data++ = '='; break; + case 2: + *handle->data++ = base64_table[(handle->c<<2)&63]; + *handle->data++ = '='; break; + default: + handle->state = IMG_DONE; + return IMG_DONE; + } + Tcl_DStringSetLength(handle->buffer, + (handle->data) - Tcl_DStringValue(handle->buffer)); + handle->state = IMG_DONE; + return IMG_DONE; + } + + if (handle->state == IMG_CHAN) { + char ch = (char) c; + return (Tcl_Write((Tcl_Channel) handle->data, &ch, 1)>0) ? c : IMG_DONE; + } + + c &= 0xff; + switch (handle->state++) { + case 0: + *handle->data++ = base64_table[(c>>2)&63]; break; + case 1: + c |= handle->c << 8; + *handle->data++ = base64_table[(c>>4)&63]; break; + case 2: + handle->state = 0; + c |= handle->c << 8; + *handle->data++ = base64_table[(c>>6)&63]; + *handle->data++ = base64_table[c&63]; break; + } + handle->c = c; + if (handle->length++ > 52) { + handle->length = 0; + *handle->data++ = '\n'; + } + return c & 0xff; +}; + +/* + *------------------------------------------------------------------------- + * tkimg_WriteInit -- + * This procedure initializes a base64 decoder handle for writing + * + * Results: + * none + * + * Side effects: + * the base64 handle is initialized + * + *------------------------------------------------------------------------- + */ + +void tkimg_WriteInit( + Tcl_DString *buffer, + tkimg_MFile *handle /* mmencode "file" handle */ +) { + Tcl_DStringSetLength(buffer, buffer->spaceAvl); + handle->buffer = buffer; + handle->data = Tcl_DStringValue(buffer); + handle->state = 0; + handle->length = 0; +} + +/* + *------------------------------------------------------------------------- + * tkimg_ReadInit -- + * This procedure initializes a base64 decoder handle for reading. + * + * Results: + * none + * + * Side effects: + * the base64 handle is initialized + * + *------------------------------------------------------------------------- + */ + +int tkimg_ReadInit( + Tcl_Obj *data /* string containing initial mmencoded data */, + int c, + tkimg_MFile *handle /* mmdecode "file" handle */ +) { + handle->data = (char *) tkimg_GetByteArrayFromObj(data, &handle->length); + if (*handle->data == c) { + handle->state = IMG_STRING; + return 1; + } + c = base64_table[(c>>2)&63]; + + while ((handle->length) && (char64(*handle->data) == IMG_SPACE)) { + handle->data++; + handle->length--; + } + if (c != *handle->data) { + handle->state = IMG_DONE; + return 0; + } + handle->state = 0; + return 1; +} + +/* + *---------------------------------------------------------------------- + * + * tkimg_OpenFileChannel -- + * + * Open a file channel in binary mode. If permissions is 0, the + * file will be opened in read mode, otherwise in write mode. + * + * Results: + * The same as Tcl_OpenFileChannel, only the file will + * always be opened in binary mode without encoding. + * + * Side effects: + * If function fails, an error message will be left in the + * interpreter. + * + *---------------------------------------------------------------------- + */ + +Tcl_Channel tkimg_OpenFileChannel( + Tcl_Interp *interp, + const char *fileName, + int permissions +) { + Tcl_Channel chan = Tcl_OpenFileChannel(interp, (CONST84 char *) fileName, + permissions?"w":"r", permissions); + if (!chan) { + return NULL; + } + if (Tcl_SetChannelOption(interp, chan, "-buffersize", "131072") != TCL_OK) { + Tcl_Close(interp, chan); + return NULL; + } + if (Tcl_SetChannelOption(interp, chan, "-translation", "binary") != TCL_OK) { + Tcl_Close(interp, chan); + return NULL; + } + return chan; +} diff --git a/base/tkimgPPB.c b/base/tkimgPPB.c new file mode 100755 index 0000000..4575854 --- /dev/null +++ b/base/tkimgPPB.c @@ -0,0 +1,142 @@ +/* + * tkimgPPB.tcl + */ + +#include +#include "tkimg.h" + +/* + * Make sure that all Tk's stub entries are available, no matter what + * Tcl version we compile against. + */ +#undef Tk_PhotoPutBlock /* 266 */ +#define Tk_PhotoPutBlock ((int (*)(Tcl_Interp *, Tk_PhotoHandle, Tk_PhotoImageBlock *, int, int, int, int, int)) *((&tkStubsPtr->tk_MainLoop)+266)) +#undef Tk_PhotoPutBlock_Panic /* 246 */ +#define Tk_PhotoPutBlock_Panic ((void (*)(Tk_PhotoHandle, Tk_PhotoImageBlock *, int, int, int, int, int)) *((&tkStubsPtr->tk_MainLoop)+246)) +#undef Tk_PhotoPutBlock_NoComposite /* 144 */ +#define Tk_PhotoPutBlock_NoComposite ((void (*)(Tk_PhotoHandle, Tk_PhotoImageBlock *, int, int, int, int)) *((&tkStubsPtr->tk_MainLoop)+144)) +#undef Tk_PhotoExpand /* 265 */ +#define Tk_PhotoExpand ((int (*)(Tcl_Interp *, Tk_PhotoHandle, int, int)) *((&tkStubsPtr->tk_MainLoop)+265)) +#undef Tk_PhotoExpand_Panic /* 148 */ +#define Tk_PhotoExpand_Panic ((void (*)(Tk_PhotoHandle, int, int)) *((&tkStubsPtr->tk_MainLoop)+148)) +#undef Tk_PhotoSetSize /* 268 */ +#define Tk_PhotoSetSize ((int (*)(Tcl_Interp *, Tk_PhotoHandle, int, int)) *((&tkStubsPtr->tk_MainLoop)+268)) +#undef Tk_PhotoSetSize_Panic /* 150 */ +#define Tk_PhotoSetSize_Panic ((int (*)(Tk_PhotoHandle, int, int)) *((&tkStubsPtr->tk_MainLoop)+150)) + +/* + *---------------------------------------------------------------------- + * + * tkimg_PhotoPutBlock -- + * + * This procedure is called to put image data into a photo image. + * The difference with Tk_PhotoPutBlock is that it handles the + * transparency information as well. + * + * Results: + * None. + * + * Side effects: + * The image data is stored. The image may be expanded. + * The Tk image code is informed that the image has changed. + * + *---------------------------------------------------------------------- + */ + +int tkimg_PhotoPutBlock( + Tcl_Interp *interp, /* Interpreter for error-reporting. */ + Tk_PhotoHandle handle, /* Opaque handle for the photo image to be updated. */ + Tk_PhotoImageBlock *blockPtr, /* Pointer to a structure describing the + * pixel data to be copied into the image. */ + int x, /* Coordinates of the top-left pixel to */ + int y, /* be updated in the image. */ + int width, /* Dimensions of the area of the image */ + int height,/* to be updated. */ + int flags /* TK_PHOTO_COMPOSITE_OVERLAY or TK_PHOTO_COMPOSITE_SET */ +) { + if (tkimg_initialized & IMG_NOPANIC) { + return Tk_PhotoPutBlock(interp, handle, blockPtr, x, y, width, height, flags); + } + if (tkimg_initialized & IMG_COMPOSITE) { + Tk_PhotoPutBlock_Panic(handle, blockPtr, x, y, width, height, flags); + return TCL_OK; + } + if (0 && (flags == TK_PHOTO_COMPOSITE_OVERLAY)) { + int alphaOffset = blockPtr->offset[3]; + if ((alphaOffset< 0) || (alphaOffset>= blockPtr->pixelSize)) { + alphaOffset = blockPtr->offset[0]; + if (alphaOffset < blockPtr->offset[1]) { + alphaOffset = blockPtr->offset[1]; + } + if (alphaOffset < blockPtr->offset[2]) { + alphaOffset = blockPtr->offset[2]; + } + if (++alphaOffset >= blockPtr->pixelSize) { + alphaOffset = blockPtr->offset[0]; + } + } else { + if ((alphaOffset == blockPtr->offset[1]) || + (alphaOffset == blockPtr->offset[2])) { + alphaOffset = blockPtr->offset[0]; + } + } + if (alphaOffset != blockPtr->offset[0]) { + int X, Y, end; + unsigned char *pixelPtr, *imagePtr, *rowPtr; + rowPtr = imagePtr = blockPtr->pixelPtr; + for (Y = 0; Y < height; Y++) { + X = 0; + pixelPtr = rowPtr + alphaOffset; + while (X < width) { + /* search for first non-transparent pixel */ + while ((X < width) && !(*pixelPtr)) { + X++; pixelPtr += blockPtr->pixelSize; + } + end = X; + /* search for first transparent pixel */ + while ((end < width) && *pixelPtr) { + end++; pixelPtr += blockPtr->pixelSize; + } + if (end > X) { + blockPtr->pixelPtr = rowPtr + blockPtr->pixelSize * X; + Tk_PhotoPutBlock_NoComposite(handle, blockPtr, x+X, y+Y, end-X, 1); + } + X = end; + } + rowPtr += blockPtr->pitch; + } + blockPtr->pixelPtr = imagePtr; + return TCL_OK; + } + } + Tk_PhotoPutBlock_NoComposite(handle, blockPtr, x, y, width, height); + return TCL_OK; +} + +int tkimg_PhotoExpand( + Tcl_Interp *interp, /* Interpreter for error-reporting. */ + Tk_PhotoHandle handle, /* Opaque handle for the photo image + * to be updated. */ + int width, /* Dimensions of the area of the image */ + int height /* to be updated. */ +) { + if (tkimg_initialized & IMG_NOPANIC) { + return Tk_PhotoExpand(interp, handle, width, height); + } + Tk_PhotoExpand_Panic(handle, width, height); + return TCL_OK; +} + +int tkimg_PhotoSetSize( + Tcl_Interp *interp, /* Interpreter for error-reporting. */ + Tk_PhotoHandle handle, /* Opaque handle for the photo image + * to be updated. */ + int width, /* Dimensions of the area of the image */ + int height /* to be updated. */ +) { + if (tkimg_initialized & IMG_NOPANIC) { + return Tk_PhotoSetSize(interp, handle, width, height); + } + Tk_PhotoSetSize_Panic(handle, width, height); + return TCL_OK; +} diff --git a/base/tkimgStubInit.c b/base/tkimgStubInit.c new file mode 100755 index 0000000..65b0b4f --- /dev/null +++ b/base/tkimgStubInit.c @@ -0,0 +1,55 @@ +/* + * tkimgStubInit.c -- + */ + +#include "tkimg.h" + +/* + * WARNING: The contents of this file is automatically generated by the + * genStubs.tcl script. Any modifications to the function declarations + * below should be made in the tkimg.decls script. + */ + +MODULE_SCOPE const TkimgStubs tkimgStubs; + +/* !BEGIN!: Do not edit below this line. */ + +const TkimgStubs tkimgStubs = { + TCL_STUB_MAGIC, + 0, + tkimg_OpenFileChannel, /* 0 */ + tkimg_ReadInit, /* 1 */ + tkimg_WriteInit, /* 2 */ + tkimg_Getc, /* 3 */ + tkimg_Read, /* 4 */ + tkimg_Putc, /* 5 */ + tkimg_Write, /* 6 */ + tkimg_ReadBuffer, /* 7 */ + 0, /* 8 */ + 0, /* 9 */ + tkimg_PhotoPutBlock, /* 10 */ + tkimg_PhotoExpand, /* 11 */ + tkimg_PhotoSetSize, /* 12 */ + 0, /* 13 */ + 0, /* 14 */ + 0, /* 15 */ + 0, /* 16 */ + 0, /* 17 */ + 0, /* 18 */ + 0, /* 19 */ + tkimg_FixChanMatchProc, /* 20 */ + tkimg_FixObjMatchProc, /* 21 */ + tkimg_FixStringWriteProc, /* 22 */ + 0, /* 23 */ + 0, /* 24 */ + 0, /* 25 */ + 0, /* 26 */ + 0, /* 27 */ + 0, /* 28 */ + 0, /* 29 */ + tkimg_GetStringFromObj, /* 30 */ + tkimg_GetByteArrayFromObj, /* 31 */ + tkimg_ListObjGetElements, /* 32 */ +}; + +/* !END!: Do not edit above this line. */ diff --git a/base/tkimgStubLib.c b/base/tkimgStubLib.c new file mode 100755 index 0000000..984d53f --- /dev/null +++ b/base/tkimgStubLib.c @@ -0,0 +1,58 @@ +/* + * tkimgStubLib.c -- + * + * Stub object that will be statically linked into extensions that wish + * to access the TKIMG API. + * + * Copyright (c) 2002 Andreas Kupries + * Copyright (c) 2002 Andreas Kupries + * + * See the file "license.terms" for information on usage and redistribution + * of this file, and for a DISCLAIMER OF ALL WARRANTIES. + * + * RCS: @(#) $Id: tkimgStubLib.c 274 2010-06-28 13:23:34Z nijtmans $ + */ + +#ifndef USE_TCL_STUBS +# define USE_TCL_STUBS +#endif + +#include "tkimg.h" + +const TkimgStubs *tkimgStubsPtr; + +/* + *---------------------------------------------------------------------- + * + * Tkimg_InitStubs -- + * + * Checks that the correct version of Blt is loaded and that it + * supports stubs. It then initialises the stub table pointers. + * + * Results: + * The actual version of BLT that satisfies the request, or + * NULL to indicate that an error occurred. + * + * Side effects: + * Sets the stub table pointers. + * + *---------------------------------------------------------------------- + */ + +MODULE_SCOPE const char * +Tkimg_InitStubs( + Tcl_Interp *interp, + const char *version, + int exact +) { + const char *result; + void *data; + + result = Tcl_PkgRequireEx(interp, PACKAGE_TCLNAME, (CONST84 char *) version, exact, &data); + if (!result || !data) { + return NULL; + } + + tkimgStubsPtr = (const TkimgStubs *) data; + return result; +} diff --git a/base/tkimgUtils.c b/base/tkimgUtils.c new file mode 100755 index 0000000..64c7251 --- /dev/null +++ b/base/tkimgUtils.c @@ -0,0 +1,261 @@ +/* + * tkimgUtils.tcl + */ + +#include +#include +#include "tkimg.h" + +/* + * The variable "tkimg_initialized" contains flags indicating which + * version of Tcl or Perl we are running: + * + * IMG_PERL perl + * IMG_COMPOSITE Photo image type proc signatures are 8.4 or higher. + * IMG_NOPANIC Photo image type proc signatures are 8.5 or higher. + * + * These flags will be determined at runtime (except the IMG_PERL + * flag, for now), so we can use the same dynamic library for all + * Tcl/Tk versions (and for Perl/Tk in the future). + * + * The existence of the CPP macro _LANG implies usage in Perl/Tk. + * + * Img 1.4: Support for Tcl 8.2 and lower is dropped. + */ + +int tkimg_initialized = 0; + +int TkimgInitUtilities( + Tcl_Interp *interp +) { +#ifdef _LANG + tkimg_initialized = IMG_PERL; +#else + + int major, minor, patchlevel, type; + tkimg_initialized = IMG_TCL; + + Tcl_GetVersion(&major, &minor, &patchlevel, &type); + + if ((major > 8) || ((major == 8) && (minor > 3))) { + tkimg_initialized |= IMG_COMPOSITE; + } + if ((major > 8) || ((major == 8) && (minor > 4))) { + tkimg_initialized |= IMG_NOPANIC; + } + +#endif + return tkimg_initialized; +} + + +/* + *---------------------------------------------------------------------- + * + * tkimg_GetStringFromObj -- + * + * Returns the string representation's byte array pointer and length + * for an object. + * + * Results: + * Returns a pointer to the string representation of objPtr. If + * lengthPtr isn't NULL, the length of the string representation is + * stored at *lengthPtr. The byte array referenced by the returned + * pointer must not be modified by the caller. Furthermore, the + * caller must copy the bytes if they need to retain them since the + * object's string rep can change as a result of other operations. + * REMARK: This function reacts a little bit different than + * Tcl_GetStringFromObj(): + * - objPtr is allowed to be NULL. In that case the NULL pointer + * will be returned, and the length will be reported to be 0; + * In the tkimg_ code there is never a distinction between en empty + * string and a NULL pointer, while the latter is easier to check + * for. That's the reason for this difference. + * + * Side effects: + * May call the object's updateStringProc to update the string + * representation from the internal representation. + * + *---------------------------------------------------------------------- + */ + +const char *tkimg_GetStringFromObj( + register Tcl_Obj *objPtr, /* Object whose string rep byte pointer + * should be returned, or NULL */ + register int *lengthPtr /* If non-NULL, the location where the + * string rep's byte array length should be + * stored. If NULL, no length is stored. */ +) { + if (!objPtr) { + if (lengthPtr) { + *lengthPtr = 0; + } + return NULL; + } +#ifdef _LANG + { + char *string = LangString((Arg) objPtr); + if (lengthPtr) { + *lengthPtr = string? strlen(string): 0; + } + return string; + } +#else /* _LANG */ + return Tcl_GetStringFromObj(objPtr, lengthPtr); +#endif /* _LANG */ +} + + +/* + *---------------------------------------------------------------------- + * + * tkimg_GetByteArrayFromObj -- + * + * Returns the binary representation and length + * for a byte array object. + * + * Results: + * Returns a pointer to the byte representation of objPtr. If + * lengthPtr isn't NULL, the length of the string representation is + * stored at *lengthPtr. The byte array referenced by the returned + * pointer must not be modified by the caller. Furthermore, the + * caller must copy the bytes if they need to retain them since the + * objects representation can change as a result of other operations. + * + * Side effects: + * May call the object's updateStringProc to update the string + * representation from the internal representation. + * + *---------------------------------------------------------------------- + */ +unsigned char *tkimg_GetByteArrayFromObj( + register Tcl_Obj *objPtr, /**< Object whose string rep byte pointer + * should be returned, or NULL */ + register int *lengthPtr /**< If non-NULL, the location where the + * string rep's byte array length should be + * stored. If NULL, no length is stored. */ +) { +#ifdef _LANG + char *string = LangString((Arg) objPtr); + if (lengthPtr) { + *lengthPtr = string? strlen(string): 0; + } + return (unsigned char *) string; +#else /* _LANG */ + + return Tcl_GetByteArrayFromObj(objPtr, lengthPtr); +#endif /* _LANG */ +} + + +/* + *---------------------------------------------------------------------- + * + * tkimg_ListObjGetElements -- + * + * Splits an object into its components. + * + * Results: + * If objPtr is a valid list (or can be converted to one), + * TCL_OK will be returned. The object will be split in + * its components. + * Otherwise TCL_ERROR is returned. If interp is not a NULL + * pointer, an error message will be left in it as well. + * + * Side effects: + * May call the object's updateStringProc to update the string + * representation from the internal representation. + * + *---------------------------------------------------------------------- + */ + +int tkimg_ListObjGetElements( + Tcl_Interp *interp, + Tcl_Obj *objPtr, + int *objc, + Tcl_Obj ***objv +) { + if (!objPtr) { + *objc = 0; + return TCL_OK; + } + return Tcl_ListObjGetElements(interp, objPtr, objc, objv); +} + +/* + *---------------------------------------------------------------------- + * + * tkimg_Fix*Proc -- + * + * Various Compatibility functions + * + * Results: + * The functions below allow an image type to distinguish + * between a call made by Tk 8.3.2 or earlier (4 arguments), versus 8.3 + * or later (3 arguments) and adapt at runtime. This adaption is done + * by shuffling the incoming arguments around to their correct positions. + * + * Side effects: + * S.a. + * + *---------------------------------------------------------------------- + */ + +void tkimg_FixChanMatchProc( + Tcl_Interp **interp, + Tcl_Channel *chan, + const char **file, + Tcl_Obj **format, + int **width, + int **height +) { + Tcl_Interp *tmp; + + if (tkimg_initialized & IMG_PERL) { + return; + } + tmp = (Tcl_Interp *) *height; + + *height = *width; + *width = (int *) *format; + *format = (Tcl_Obj *) *file; + *file = (const char *) *chan; + *chan = (Tcl_Channel) *interp; + *interp = tmp; +} + +void tkimg_FixObjMatchProc( + Tcl_Interp **interp, + Tcl_Obj **data, + Tcl_Obj **format, + int **width, + int **height +) { + Tcl_Interp *tmp; + + if (tkimg_initialized & IMG_PERL) { + return; + } + tmp = (Tcl_Interp *) *height; + + *height = *width; + *width = (int *) *format; + *format = (Tcl_Obj *) *data; + *data = (Tcl_Obj *) *interp; + *interp = tmp; +} + +void tkimg_FixStringWriteProc( + Tcl_DString *data, + Tcl_Interp **interp, + Tcl_DString **dataPtr, + Tcl_Obj **format, + Tk_PhotoImageBlock **blockPtr +) { + if (!*blockPtr) { + *blockPtr = (Tk_PhotoImageBlock *) *format; + *format = (Tcl_Obj *) *dataPtr; + *dataPtr = data; + Tcl_DStringInit(data); + } +} diff --git a/bmp/ChangeLog b/bmp/ChangeLog new file mode 100755 index 0000000..d010893 --- /dev/null +++ b/bmp/ChangeLog @@ -0,0 +1,30 @@ +2011-11-27 Harald Oehlmann + + * bmp.c: image resolution parameter may be given when saving bmp + (TkImg Feature Request 3062062) + +2009-01-06 Jan Nijtmans + + * No longer Panic when an out-of-memory error occurs, + when compiled with Tcl/Tk 8.5 or later and running with + Tcl/Tk 8.5 and later (Tk bug #2477446) + +2004-08-18 Andreas Kupries + + * + * Released and tagged Tkimg 1.3 ======================== + * + +2002-11-20 Andreas Kupries + + * Makefile.in: + * configure.in: New configuration variable PHIMTYPE, contains name + of image type (in contrast to library name and package + name). Inserted in 'init.c'. The configure variable TK_XINCLUDES + has to placed in variable, to avoid problem on platforms placing + a shell comment into it. More in the Makefile. + +2002-11-19 Andreas Kupries + + * Start of logging. + * tkimg/bmp: BMP photo image type. diff --git a/bmp/Makefile.in b/bmp/Makefile.in new file mode 100755 index 0000000..12a5104 --- /dev/null +++ b/bmp/Makefile.in @@ -0,0 +1,514 @@ +# Makefile.in -- +# +# This file is a Makefile for tkimgbmp TEA Extension. If it has the name +# "Makefile.in" then it is a template for a Makefile; to generate the +# actual Makefile, run "./configure", which is a configuration script +# generated by the "autoconf" program (constructs like "@foo@" will get +# replaced in the actual Makefile. +# +# Copyright (c) 1999 Scriptics Corporation. +# Copyright (c) 2002-2005 ActiveState Corporation. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# RCS: @(#) $Id: Makefile.in 367 2013-11-19 12:32:34Z nijtmans $ + +#======================================================================== +# Add additional lines to handle any additional AC_SUBST cases that +# have been added in a customized configure script. +#======================================================================== + +PACKAGE_TCLNAME = @PACKAGE_TCLNAME@ + +tkimg_SRC_PATH = @tkimg_SRC_PATH@ +tkimg_BUILD_PATH = @tkimg_BUILD_PATH@ +tkimg_VERSION = @tkimg_VERSION@ + +#======================================================================== +# Nothing of the variables below this line should need to be changed. +# Please check the TARGETS section below to make sure the make targets +# are correct. +#======================================================================== + +#======================================================================== +# The names of the source files is defined in the configure script. +# The object files are used for linking into the final library. +# This will be used when a dist target is added to the Makefile. +# It is not important to specify the directory, as long as it is the +# $(srcdir) or in the generic, win or unix subdirectory. +#======================================================================== + +PKG_SOURCES = @PKG_SOURCES@ +PKG_OBJECTS = @PKG_OBJECTS@ + +PKG_STUB_SOURCES = @PKG_STUB_SOURCES@ +PKG_STUB_OBJECTS = @PKG_STUB_OBJECTS@ + +#======================================================================== +# PKG_TCL_SOURCES identifies Tcl runtime files that are associated with +# this package that need to be installed, if any. +#======================================================================== + +PKG_TCL_SOURCES = @PKG_TCL_SOURCES@ + +#======================================================================== +# This is a list of public header files to be installed, if any. +#======================================================================== + +PKG_HEADERS = @PKG_HEADERS@ + +#======================================================================== +# "PKG_LIB_FILE" refers to the library (dynamic or static as per +# configuration options) composed of the named objects. +#======================================================================== + +PKG_LIB_FILE = @PKG_LIB_FILE@ +PKG_STUB_LIB_FILE = @PKG_STUB_LIB_FILE@ + +lib_BINARIES = $(PKG_LIB_FILE) +BINARIES = $(lib_BINARIES) + +SHELL = @SHELL@ + +srcdir = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +libdir = @libdir@ +includedir = @includedir@ +datarootdir = @datarootdir@ +datadir = @datadir@ +mandir = @mandir@ + +DESTDIR = + +PKG_DIR = $(PACKAGE_NAME)$(PACKAGE_VERSION) +pkgdatadir = $(datadir)/$(PKG_DIR) +pkglibdir = $(libdir)/$(PKG_DIR) +pkgincludedir = $(includedir)/$(PKG_DIR) + +top_builddir = . + +INSTALL_OPTIONS = +INSTALL = $(SHELL) $(srcdir)/../tclconfig/install-sh -c ${INSTALL_OPTIONS} +INSTALL_DATA_DIR = ${INSTALL} -d -m 755 +INSTALL_PROGRAM = ${INSTALL} -m 755 +INSTALL_DATA = ${INSTALL} -m 644 +INSTALL_SCRIPT = ${INSTALL_PROGRAM} +INSTALL_LIBRARY = ${INSTALL_DATA} + +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +CC = @CC@ +CFLAGS_DEFAULT = @CFLAGS_DEFAULT@ +CFLAGS_WARNING = @CFLAGS_WARNING@ +CLEANFILES = @CLEANFILES@ +EXEEXT = @EXEEXT@ +LDFLAGS_DEFAULT = @LDFLAGS_DEFAULT@ +MAKE_LIB = @MAKE_LIB@ +MAKE_SHARED_LIB = @MAKE_SHARED_LIB@ +MAKE_STATIC_LIB = @MAKE_STATIC_LIB@ +MAKE_STUB_LIB = @MAKE_STUB_LIB@ +OBJEXT = @OBJEXT@ +RANLIB = @RANLIB@ +RANLIB_STUB = @RANLIB_STUB@ +SHLIB_CFLAGS = @SHLIB_CFLAGS@ +SHLIB_LD = @SHLIB_LD@ +SHLIB_LD_FLAGS = @SHLIB_LD_FLAGS@ +SHLIB_LD_LIBS = @SHLIB_LD_LIBS@ +STLIB_LD = @STLIB_LD@ +TCL_BIN_DIR = @TCL_BIN_DIR@ +TCL_DEFS = @TCL_DEFS@ +TCL_SRC_DIR = @TCL_SRC_DIR@ +TK_BIN_DIR = @TK_BIN_DIR@ +TK_SRC_DIR = @TK_SRC_DIR@ + +# This is necessary for packages that use private Tcl headers +TCL_TOP_DIR_NATIVE = @TCL_TOP_DIR_NATIVE@ + +# Not used, but retained for reference of what libs Tcl required +TCL_LIBS = @TCL_LIBS@ +TK_LIBS = @TK_LIBS@ + +#======================================================================== +# TCLLIBPATH seeds the auto_path in Tcl's init.tcl so we can test our +# package without installing. The other environment variables allow us +# to test against an uninstalled Tcl. Add special env vars that you +# require for testing here (like TCLX_LIBRARY). +#======================================================================== + +EXTRA_PATH = $(top_builddir):$(TCL_BIN_DIR):$(TK_BIN_DIR) +TCLSH_ENV = TCL_LIBRARY=`@CYGPATH@ $(TCL_SRC_DIR)/library` \ + TK_LIBRARY=`@CYGPATH@ $(TK_SRC_DIR)/library` \ + @LD_LIBRARY_PATH_VAR@="$(EXTRA_PATH):$(@LD_LIBRARY_PATH_VAR@)" \ + PATH="$(EXTRA_PATH):$(PATH)" \ + TCLLIBPATH="$(top_builddir)" +TCLSH_PROG = @TCLSH_PROG@ +WISH_PROG = @WISH_PROG@ +TCLSH = $(TCLSH_ENV) $(TCLSH_PROG) +WISH = $(TCLSH_ENV) $(WISH_PROG) +SHARED_BUILD = @SHARED_BUILD@ + +# The local includes must come first, because the TK_XINCLUDES can be +# just a comment + +INCLUDES = @PKG_INCLUDES@ \ + @TK_INCLUDES@ @TCL_INCLUDES@ @TK_XINCLUDES@ + +PKG_CFLAGS = @PKG_CFLAGS@ + +# TCL_DEFS is not strictly need here, but if you remove it, then you +# must make sure that configure.in checks for the necessary components +# that your library may use. TCL_DEFS can actually be a problem if +# you do not compile with a similar machine setup as the Tcl core was +# compiled with. +#DEFS = $(TCL_DEFS) @DEFS@ $(PKG_CFLAGS) +DEFS = @DEFS@ $(PKG_CFLAGS) + +CONFIG_CLEAN_FILES = Makefile + +CPPFLAGS = @CPPFLAGS@ -DPACKAGE_TCLNAME=\"$(PACKAGE_TCLNAME)\" +LIBS = @PKG_LIBS@ @LIBS@ +AR = @AR@ +CFLAGS = @CFLAGS@ +COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) + +.SUFFIXES: .c .$(OBJEXT) + +#======================================================================== +# Start of user-definable TARGETS section +#======================================================================== + +PHIMGTYPE = @PHIMGTYPE@ + +tkimg_SRC_PATH = @tkimg_SRC_PATH@ +tkimg_BUILD_PATH = @tkimg_BUILD_PATH@ +tkimg_VERSION = @tkimg_VERSION@ + +#======================================================================== +# TEA TARGETS. Please note that the "libraries:" target refers to platform +# independent files, and the "binaries:" target inclues executable programs and +# platform-dependent libraries. Modify these targets so that they install +# the various pieces of your package. The make and install rules +# for the BINARIES that you specified above have already been done. +#======================================================================== + +all: binaries libraries doc + +#======================================================================== +# The binaries target builds executable programs, Windows .dll's, unix +# shared/static libraries, and any other platform-dependent files. +# The list of targets to build for "binaries:" is specified at the top +# of the Makefile, in the "BINARIES" variable. +#======================================================================== + +binaries: $(BINARIES) pkgIndex.tcl + +libraries: + +doc: + +# Currently no documentation to create, the HTML is part of the +# distribution. +# ................................................................. +# @echo "If you have documentation to create, place the commands to" +# @echo "build the docs in the 'doc:' target. For example:" +# @echo " xml2nroff sample.xml > sample.n" +# @echo " xml2html sample.xml > sample.html" + +install: all install-binaries install-libraries install-doc + +install-binaries: binaries install-lib-binaries install-bin-binaries + +#======================================================================== +# This rule installs platform-independent files, such as header files. +#======================================================================== + +install-libraries: libraries + @$(INSTALL_DATA_DIR) $(DESTDIR)$(includedir) + @echo "Installing header files in $(DESTDIR)$(includedir)" + @list='$(PKG_HEADERS)'; for i in $$list; do \ + echo "Installing $(srcdir)/$$i" ; \ + $(INSTALL_DATA) $(srcdir)/$$i $(DESTDIR)$(includedir) ; \ + done; + +#======================================================================== +# Install documentation. Unix manpages should go in the $(mandir) +# directory. +#======================================================================== + +install-doc: doc + +# @$(INSTALL_DATA_DIR) $(DESTDIR)$(mandir)/mann +# @echo "Installing documentation in $(DESTDIR)$(mandir)" +# @for i in doc/*.n; do \ +# echo "Installing $$i"; \ +# rm -f $(DESTDIR)$(mandir)/mann/`basename $$i`; \ +# $(INSTALL_DATA) $$i $(DESTDIR)$(mandir)/mann ; \ +# done + +test: binaries libraries + $(WISH) `@CYGPATH@ $(srcdir)/tests/all.tcl` $(TESTFLAGS) + +shell: binaries libraries + @$(TCLSH) $(SCRIPT) + +gdb: + $(TCLSH_ENV) gdb $(TCLSH_PROG) $(SCRIPT) + +depend: + +#======================================================================== +# $(PKG_LIB_FILE) should be listed as part of the BINARIES variable +# mentioned above. That will ensure that this target is built when you +# run "make binaries". +# +# The $(PKG_OBJECTS) objects are created and linked into the final +# library. In most cases these object files will correspond to the +# source files above. +#======================================================================== + +$(PKG_LIB_FILE): $(PKG_OBJECTS) + -rm -f $(PKG_LIB_FILE) + ${MAKE_LIB} + $(RANLIB) $(PKG_LIB_FILE) + +$(PKG_STUB_LIB_FILE): $(PKG_STUB_OBJECTS) + -rm -f $(PKG_STUB_LIB_FILE) + ${MAKE_STUB_LIB} + $(RANLIB_STUB) $(PKG_STUB_LIB_FILE) + +#======================================================================== +# We need to enumerate the list of .c to .o lines here. +# +# In the following lines, $(srcdir) refers to the toplevel directory +# containing your extension. If your sources are in a subdirectory, +# you will have to modify the paths to reflect this: +# +# tkimgbmp.$(OBJEXT): $(srcdir)/generic/tkimgbmp.c +# $(COMPILE) -c `@CYGPATH@ $(srcdir)/generic/tkimgbmp.c` -o $@ +# +# Setting the VPATH variable to a list of paths will cause the makefile +# to look into these paths when resolving .c to .obj dependencies. +# As necessary, add $(srcdir):$(srcdir)/compat:.... +#======================================================================== + +VPATH = $(srcdir):$(srcdir)/generic:$(srcdir)/unix:$(srcdir)/win + +.c.@OBJEXT@: + $(COMPILE) -c `@CYGPATH@ $<` -o $@ + +#======================================================================== +# Create the pkgIndex.tcl file. +# It is usually easiest to let Tcl do this for you with pkg_mkIndex, but +# you may find that you need to customize the package. If so, either +# modify the -hand version, or create a pkgIndex.tcl.in file and have +# the configure script output the pkgIndex.tcl by editing configure.in. +#======================================================================== + +pkgIndex.tcl: $(PKG_LIB_FILE) + (echo 'package ifneeded $(PACKAGE_TCLNAME) $(PACKAGE_VERSION) \ + [list load [file join $$dir $(PKG_LIB_FILE)]]'\ + ) > pkgIndex.tcl + +#======================================================================== +# Distribution creation +# You may need to tweak this target to make it work correctly. +#======================================================================== + +#COMPRESS = tar cvf $(PKG_DIR).tar $(PKG_DIR); compress $(PKG_DIR).tar +COMPRESS = gtar zcvf $(PKG_DIR).tar.gz $(PKG_DIR) +DIST_ROOT = /tmp/dist +DIST_DIR = $(DIST_ROOT)/$(PKG_DIR) + +dist-clean: + rm -rf $(DIST_DIR) $(DIST_ROOT)/$(PKG_DIR).tar.* + +dist: dist-clean doc + mkdir -p $(DIST_DIR) + cp -p $(srcdir)/ChangeLog $(srcdir)/README* $(srcdir)/doc/license* \ + $(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/*.in \ + $(DIST_DIR)/ + chmod 664 $(DIST_DIR)/Makefile.in $(DIST_DIR)/aclocal.m4 + chmod 775 $(DIST_DIR)/configure $(DIST_DIR)/configure.in + + mkdir $(DIST_DIR)/tclconfig + cp $(srcdir)/tclconfig/install-sh $(srcdir)/tclconfig/tcl.m4 \ + $(DIST_DIR)/tclconfig/ + chmod 664 $(DIST_DIR)/tclconfig/tcl.m4 + chmod +x $(DIST_DIR)/tclconfig/install-sh + + -list='htdocs/art demos generic library mac tests unix win tea.tests tools tools/rules'; \ + for p in $$list; do \ + if test -d $(srcdir)/$$p ; then \ + mkdir -p $(DIST_DIR)/$$p; \ + cp -p $(srcdir)/$$p/*.* $(srcdir)/$$p/* $(DIST_DIR)/$$p/; \ + fi; \ + done + + -list='doc'; \ + for p in $$list; do \ + if test -d $$p ; then \ + mkdir -p $(DIST_DIR)/$$p; \ + cp -p $$p/*.* $$p/* $(DIST_DIR)/$$p/; \ + fi; \ + done + -mv $(DIST_DIR)/htdocs/art $(DIST_DIR)/doc/art + rm -rf $(DIST_DIR)/htdocs + + (cd $(DIST_ROOT); $(COMPRESS);) + +dist_orig: + rm -rf $(PKG_DIR)* + ls -d $(srcdir)/* > __FILES + mkdir $(PKG_DIR) + cp -rf `cat __FILES | grep -v __FILES` $(PKG_DIR) + rm __FILES + find $(PKG_DIR) -name CVS -prune -exec rm -rf {} \; + cd $(PKG_DIR) ; $(TCLSH_PROG) PREPARE + -tar cf - $(PKG_DIR) | gzip --best > $(PKG_DIR).tar.gz + -tar cf - $(PKG_DIR) | bzip2 > $(PKG_DIR).tar.bz2 + -zip -r $(PKG_DIR).zip $(PKG_DIR) + rm -rf $(PKG_DIR) + +#======================================================================== +# End of user-definable section +#======================================================================== + +#======================================================================== +# Don't modify the file to clean here. Instead, set the "CLEANFILES" +# variable in configure.in +#======================================================================== + +clean: + -test -z "$(BINARIES)" || rm -f $(BINARIES) + -rm -f *.$(OBJEXT) core *.core + -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) + +distclean: clean + -rm -f *.tab.c + -rm -f $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log config.status + +#======================================================================== +# Install binary object libraries. On Windows this includes both .dll and +# .lib files. Because the .lib files are not explicitly listed anywhere, +# we need to deduce their existence from the .dll file of the same name. +# Library files go into the lib directory. +# In addition, this will generate the pkgIndex.tcl +# file in the install location (assuming it can find a usable tclsh shell) +# +# You should not have to modify this target. +#======================================================================== + +install-lib-binaries: + @$(INSTALL_DATA_DIR) $(DESTDIR)$(pkglibdir) + @list='$(lib_BINARIES)'; for p in $$list; do \ + if test -f $$p; then \ + echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p"; \ + $(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p; \ + stub=`echo $$p|sed -e "s/.*\(stub\).*/\1/"`; \ + if test "x$$stub" = "xstub"; then \ + echo " $(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p"; \ + $(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p; \ + else \ + echo " $(RANLIB) $(DESTDIR)$(pkglibdir)/$$p"; \ + $(RANLIB) $(DESTDIR)$(pkglibdir)/$$p; \ + fi; \ + ext=`echo $$p|sed -e "s/.*\.//"`; \ + if test "x$$ext" = "xdll"; then \ + lib=`basename $$p|sed -e 's/.[^.]*$$//'`.lib; \ + if test -f $$lib; then \ + echo " $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib"; \ + $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib; \ + fi; \ + fi; \ + fi; \ + done + @list='$(PKG_TCL_SOURCES)'; for p in $$list; do \ + if test -f $(srcdir)/$$p; then \ + destp=`basename $$p`; \ + echo " Install $$destp $(DESTDIR)$(pkglibdir)/$$destp"; \ + $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkglibdir)/$$destp; \ + fi; \ + done + @if test "x$(SHARED_BUILD)" = "x1"; then \ + echo " Install pkgIndex.tcl $(DESTDIR)$(pkglibdir)"; \ + $(INSTALL_DATA) pkgIndex.tcl $(DESTDIR)$(pkglibdir); \ + fi + +#======================================================================== +# Install binary executables (e.g. .exe files and dependent .dll files) +# This is for files that must go in the bin directory (located next to +# wish and tclsh), like dependent .dll files on Windows. +# +# You should not have to modify this target, except to define bin_BINARIES +# above if necessary. +#======================================================================== + +install-bin-binaries: + @$(INSTALL_DATA_DIR) $(DESTDIR)$(bindir) + @list='$(bin_BINARIES)'; for p in $$list; do \ + if test -f $$p; then \ + echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p"; \ + $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p; \ + fi; \ + done + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status + +uninstall-binaries: + list='$(lib_BINARIES)'; for p in $$list; do \ + rm -f $(DESTDIR)$(pkglibdir)/$$p; \ + done + list='$(PKG_TCL_SOURCES)'; for p in $$list; do \ + p=`basename $$p`; \ + rm -f $(DESTDIR)$(pkglibdir)/$$p; \ + done + list='$(bin_BINARIES)'; for p in $$list; do \ + rm -f $(DESTDIR)$(bindir)/$$p; \ + done + +#======================================================================== +# +# Target to regenerate header files and stub files from the *.decls tables. +# +#======================================================================== + +genstubs: + $(TCLSH_PROG) \ + $(srcdir)/tools/genStubs.tcl $(srcdir)/generic \ + $(srcdir)/tkimgbmp.decls + +#======================================================================== +# +# Target to check that all exported functions have an entry in the stubs +# tables. +# +#======================================================================== + +tkimgbmp_DECLS = \ + $(srcdir)/tkimgbmp.decls + +checkstubs: + -@for i in `nm -p $(tkimgbmp_LIB_FILE) | awk '$$2 ~ /T/ { print $$3 }' \ + | sort -n`; do \ + match=0; \ + for j in $(tkimgbmp_DECLS); do \ + if [ `grep -c $$i $$j` -gt 0 ]; then \ + match=1; \ + fi; \ + done; \ + if [ $$match -eq 0 ]; then echo $$i; fi \ + done + + +.PHONY: all binaries clean depend distclean doc install libraries test + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/bmp/README b/bmp/README new file mode 100755 index 0000000..b075b98 --- /dev/null +++ b/bmp/README @@ -0,0 +1,2 @@ + +No notes. diff --git a/bmp/aclocal.m4 b/bmp/aclocal.m4 new file mode 100755 index 0000000..e66e79d --- /dev/null +++ b/bmp/aclocal.m4 @@ -0,0 +1,10 @@ +# +# Include the TEA standard macro set +# + +builtin(include,../tclconfig/tcl.m4) +builtin(include,../tclconfig/img.m4) + +# +# Add here whatever m4 macros you want to define for your package +# diff --git a/bmp/bmp.c b/bmp/bmp.c new file mode 100755 index 0000000..a032d5e --- /dev/null +++ b/bmp/bmp.c @@ -0,0 +1,858 @@ +/* + * bmp.c -- + * + * BMP photo image type, Tcl/Tk package + * + * Copyright (c) 1997-2003 Jan Nijtmans + * Copyright (c) 2002 Andreas Kupries + * + * $Id: bmp.c 331 2011-11-27 18:29:13Z oehhar $ + * + * The following format options are available: + * + * Write BMP image: "ico -resolution " + * + * -resolution : Set the resolution property of the output file. + * The default is 74 dpi (no option) + * Possible forms for list: + * {xRes unit} : set x and y resolution to same value + * {xRes yRes} : set x to 74dpi and y to 74*YRes/XRes + * {xRes yRes unit} : set x and y resolution to given values + * xRes, yRes are floats >= 0. 0 is the "no value" value. + * unit is one of "c" cm, "m" mm, "i" inch or "p" inch/72. + */ + +/* + * Generic initialization code, parameterized via CPACKAGE and PACKAGE. + */ + +#include +#include +#include "init.c" + +/* Compression types */ +#define BI_RGB 0 +#define BI_RLE8 1 +#define BI_RLE4 2 +#define BI_BITFIELDS 3 + +/* Structure for reading bit masks for compression type BI_BITFIELDS */ +typedef struct { + unsigned int mask; + unsigned int shiftin; + unsigned int shiftout; +} BitmapChannel; + +/* + * Now the implementation + */ +/* + * Prototypes for local procedures defined in this file: + */ + +static int CommonMatch(tkimg_MFile *handle, int *widthPtr, + int *heightPtr, unsigned char **colorMap, int *numBits, + int *numCols, int *comp, unsigned int *mask); + +static int CommonRead(Tcl_Interp *interp, tkimg_MFile *handle, + Tk_PhotoHandle imageHandle, int destX, int destY, int width, + int height, int srcX, int srcY); + +static int CommonWrite(Tcl_Interp *interp, Tcl_Obj *format, + tkimg_MFile *handle, + Tk_PhotoImageBlock *blockPtr); + +static void putint(tkimg_MFile *handle, int i); + +/* + * Entrypoints for the photo image type. + */ + +static int +ChnMatch( + Tcl_Channel chan, + const char *fileName, + Tcl_Obj *format, + int *widthPtr, + int *heightPtr, + Tcl_Interp *interp +) { + tkimg_MFile handle; + + handle.data = (char *) chan; + handle.state = IMG_CHAN; + + return CommonMatch(&handle, widthPtr, heightPtr, + NULL, NULL, NULL, NULL, NULL); +} + +static int +ObjMatch( + Tcl_Obj *data, + Tcl_Obj *format, + int *widthPtr, + int *heightPtr, + Tcl_Interp *interp +) { + tkimg_MFile handle; + + if (!tkimg_ReadInit(data, 'B', &handle)) { + return 0; + } + return CommonMatch(&handle, widthPtr, heightPtr, + NULL, NULL, NULL, NULL, NULL); +} + +static int +ChnRead(interp, chan, fileName, format, imageHandle, + destX, destY, width, height, srcX, srcY) + Tcl_Interp *interp; + Tcl_Channel chan; + const char *fileName; + Tcl_Obj *format; + Tk_PhotoHandle imageHandle; + int destX, destY; + int width, height; + int srcX, srcY; +{ + tkimg_MFile handle; + + handle.data = (char *) chan; + handle.state = IMG_CHAN; + + return CommonRead(interp, &handle, imageHandle, destX, destY, + width, height, srcX, srcY); +} + +static int +ObjRead(interp, data, format, imageHandle, + destX, destY, width, height, srcX, srcY) + Tcl_Interp *interp; + Tcl_Obj *data; + Tcl_Obj *format; + Tk_PhotoHandle imageHandle; + int destX, destY; + int width, height; + int srcX, srcY; +{ + tkimg_MFile handle; + + tkimg_ReadInit(data,'B',&handle); + return CommonRead(interp, &handle, imageHandle, destX, destY, + width, height, srcX, srcY); +} + +static int +ChnWrite(interp, filename, format, blockPtr) + Tcl_Interp *interp; + const char *filename; + Tcl_Obj *format; + Tk_PhotoImageBlock *blockPtr; +{ + Tcl_Channel chan; + tkimg_MFile handle; + int result; + + chan = tkimg_OpenFileChannel(interp, filename, 0644); + if (!chan) { + return TCL_ERROR; + } + + handle.data = (char *) chan; + handle.state = IMG_CHAN; + + result = CommonWrite(interp, format, &handle, blockPtr); + if (Tcl_Close(interp, chan) == TCL_ERROR) { + return TCL_ERROR; + } + return result; +} + +static int StringWrite( + Tcl_Interp *interp, + Tcl_Obj *format, + Tk_PhotoImageBlock *blockPtr +) { + tkimg_MFile handle; + int result; + Tcl_DString data; + + Tcl_DStringInit(&data); + tkimg_WriteInit(&data, &handle); + result = CommonWrite(interp, format, &handle, blockPtr); + tkimg_Putc(IMG_DONE, &handle); + + if (result == TCL_OK) { + Tcl_DStringResult(interp, &data); + } else { + Tcl_DStringFree(&data); + } + return result; +} + +static unsigned int +getUInt32(buf) + unsigned char *buf; +{ + return (buf[0] | buf[1] << 8 | buf[2] << 16 | buf[3] << 24); +} + +static unsigned int +getUInt16(buf) + unsigned char *buf; +{ + return (buf[0] | buf[1] << 8); +} + +static void +GetChannelMasks(intMask, masks) + unsigned int *intMask; + BitmapChannel *masks; +{ + unsigned int mask; + int i, nbits, offset, bit; + + for (i=0; i<3; i++) { + mask = getUInt32((unsigned char *) &intMask[i]); + masks[i].mask = mask; + nbits = 0; + offset = -1; + for (bit=0; bit<32; bit++) { + if (mask & 1) { + nbits++; + if (offset == -1) { + offset = bit; + } + } + mask = mask >> 1; + } + masks[i].shiftin = offset; + masks[i].shiftout = 8 - nbits; + } +} + +/* + * Helper functions for the entry points. Work horses. + */ + +static int +CommonMatch(handle, widthPtr, heightPtr, colorMap, numBits, numCols, comp, mask) + tkimg_MFile *handle; + int *widthPtr, *heightPtr; + unsigned char **colorMap; + int *numBits, *numCols, *comp; + unsigned int *mask; +{ + unsigned char buf[28]; + int c,i, compression, nBits, clrUsed, offBits; + + if ((tkimg_Read(handle, (char *) buf, 2) != 2) + || (strncmp("BM", (char *) buf, 2) != 0) + || (tkimg_Read(handle, (char *) buf, 24) != 24) + || buf[13] || buf[14] || buf[15]) { + return 0; + } + + offBits = (buf[11]<<24) + (buf[10]<<16) + (buf[9]<<8) + buf[8]; + c = buf[12]; + if ((c == 40) || (c == 64)) { + *widthPtr = (buf[19]<<24) + (buf[18]<<16) + (buf[17]<<8) + buf[16]; + *heightPtr = (buf[23]<<24) + (buf[22]<<16) + (buf[21]<<8) + buf[20]; + if (tkimg_Read(handle, (char *) buf, 24) != 24) { + return 0; + } + nBits = buf[2]; + compression = buf[4]; + clrUsed = (buf[21]<<8) + buf[20]; + offBits -= c+14; + } else if (c == 12) { + *widthPtr = (buf[17]<<8) + buf[16]; + *heightPtr = (buf[19]<<8) + buf[18]; + nBits = buf[22]; + compression = BI_RGB; + clrUsed = 0; + } else { + return 0; + } + if (*widthPtr <= 0 || *heightPtr <= 0) + return 0; + + if (colorMap) { + if (c > 36) tkimg_Read(handle, (char *) buf, c - 36); + if (compression == BI_BITFIELDS) { + /* Read the channel masks. */ + tkimg_Read(handle, (char *) buf, 3*4); + if (mask) { + mask[0] = getUInt32((unsigned char *) &buf[0]); + mask[1] = getUInt32((unsigned char *) &buf[4]); + mask[2] = getUInt32((unsigned char *) &buf[8]); + } + offBits -= 3*4; + } + if (!clrUsed && nBits < 24) { + clrUsed = 1 << nBits; + } + if (nBits<16) { + unsigned char colbuf[4], *ptr; + offBits -= (3+(c!=12)) * clrUsed; + *colorMap = ptr = (unsigned char *) ckalloc(3*clrUsed); + for (i = 0; i < clrUsed; i++) { + tkimg_Read(handle, (char *) colbuf, 3+(c!=12)); + *ptr++ = colbuf[0]; *ptr++ = colbuf[1]; *ptr++ = colbuf[2]; + /*printf("color %d: %d %d %d\n", i, colbuf[2], colbuf[1], colbuf[0]);*/ + } + } + while (offBits>28) { + offBits -= 28; + tkimg_Read(handle, (char *) buf, 28); + } + if (offBits) tkimg_Read(handle, (char *) buf, offBits); + if (numCols) { + *numCols = clrUsed; + } + } + if (numBits) { + *numBits = nBits; + } + if (comp) { + *comp = compression; + } + return 1; +} + +static int +CommonRead(interp, handle, imageHandle, destX, destY, + width, height, srcX, srcY) + Tcl_Interp *interp; + tkimg_MFile *handle; + Tk_PhotoHandle imageHandle; + int destX, destY; + int width, height; + int srcX, srcY; +{ + Tk_PhotoImageBlock block; + int numBits, bytesPerLine, numCols, comp, x, y; + int fileWidth, fileHeight; + unsigned char *colorMap = NULL; + unsigned int intMask[3]; + BitmapChannel masks[3]; + char buf[10]; + unsigned char *line = NULL, *expline = NULL; + unsigned short rgb; + + CommonMatch(handle, &fileWidth, &fileHeight, &colorMap, &numBits, + &numCols, &comp, intMask); + + if (numBits == 16) { + if (comp == BI_BITFIELDS) { + GetChannelMasks(intMask, masks); + } else { + masks[0].mask = 0x7c00; + masks[0].shiftin = 10; + masks[0].shiftout = 3; + masks[1].mask = 0x03e0; + masks[1].shiftin = 5; + masks[1].shiftout = 3; + masks[2].mask = 0x001f; + masks[2].shiftin = 0; + masks[2].shiftout = 3; + } + } + + /* printf("reading %d-bit BMP %dx%d\n", numBits, width, height); */ + if (comp == BI_RLE8 || comp == BI_RLE4) { + tkimg_ReadBuffer(1); + } + + if (tkimg_PhotoExpand(interp, imageHandle, destX + width, destY + height) == TCL_ERROR) { + goto error; + } + + bytesPerLine = ((numBits * fileWidth + 31)/32)*4; + + /* printf("bytesPerLine = %d numBits=%d (%dx%d)\n", + * bytesPerLine, numBits, width, height); + */ + block.pixelSize = 3; + block.pitch = width * 3; + block.width = width; + block.height = 1; + block.offset[0] = 2; + block.offset[1] = 1; + block.offset[2] = 0; + block.offset[3] = block.offset[0]; + + if (comp == BI_RGB || comp == BI_BITFIELDS) { /* No compression */ + line = (unsigned char *) ckalloc(bytesPerLine); + for(y=srcY+height; y=0; y--) { + tkimg_Read(handle, (char *)line, bytesPerLine); + for (x = srcX; x < (srcX+width); x++) { + *expline++ = line[x*4 + 0]; + *expline++ = line[x*4 + 1]; + *expline++ = line[x*4 + 2]; + } + if (tkimg_PhotoPutBlock(interp, imageHandle, &block, + destX, destY+y, width, 1, TK_PHOTO_COMPOSITE_SET) == TCL_ERROR) { + goto error; + } + expline = block.pixelPtr; + } + break; + case 24: + block.pixelPtr = line + srcX*3; + for( y = height-1; y>=0; y--) { + tkimg_Read(handle, (char *)line, bytesPerLine); + if (tkimg_PhotoPutBlock(interp, imageHandle, &block, + destX, destY+y, width, 1, TK_PHOTO_COMPOSITE_SET) == TCL_ERROR) { + goto error; + } + } + break; + case 16: + block.pixelPtr = expline = (unsigned char *) ckalloc(3*width); + for( y = height-1; y>=0; y--) { + tkimg_Read(handle, (char *)line, bytesPerLine); + for (x = srcX; x < (srcX+width); x++) { + rgb = getUInt16 (&line[x*2]); + *expline++ = ((rgb & masks[2].mask) >> masks[2].shiftin) << masks[2].shiftout; + *expline++ = ((rgb & masks[1].mask) >> masks[1].shiftin) << masks[1].shiftout; + *expline++ = ((rgb & masks[0].mask) >> masks[0].shiftin) << masks[0].shiftout; + } + if (tkimg_PhotoPutBlock(interp, imageHandle, &block, + destX, destY+y, width, 1, TK_PHOTO_COMPOSITE_SET) == TCL_ERROR) { + goto error; + } + expline = block.pixelPtr; + } + break; + case 8: + block.pixelPtr = expline = (unsigned char *) ckalloc(3*width); + for( y = height-1; y>=0; y--) { + tkimg_Read(handle, (char *)line, bytesPerLine); + for (x = srcX; x < (srcX+width); x++) { + memcpy(expline, colorMap+(3*line[x]),3); + expline += 3; + } + if (tkimg_PhotoPutBlock(interp, imageHandle, &block, + destX, destY+y, width, 1, TK_PHOTO_COMPOSITE_SET) == TCL_ERROR) { + goto error; + } + expline = block.pixelPtr; + } + break; + case 4: + block.pixelPtr = expline = (unsigned char *) ckalloc(3*width); + for( y = height-1; y>=0; y--) { + int c; + tkimg_Read(handle, (char *)line, bytesPerLine); + for (x = srcX; x < (srcX+width); x++) { + if (x&1) { + c = line[x/2] & 0x0f; + } else { + c = line[x/2] >> 4; + } + memcpy(expline, colorMap+(3*c),3); + expline += 3; + } + if (tkimg_PhotoPutBlock(interp, imageHandle, &block, + destX, destY+y, width, 1, TK_PHOTO_COMPOSITE_SET) == TCL_ERROR) { + goto error; + } + expline = block.pixelPtr; + } + break; + case 1: + block.pixelPtr = expline = (unsigned char *) ckalloc(3*width); + for( y = height-1; y>=0; y--) { + int c; + tkimg_Read(handle, (char *)line, bytesPerLine); + for (x = srcX; x < (srcX+width); x++) { + c = (line[x/8] >> (7-(x%8))) & 1; + memcpy(expline, colorMap+(3*c),3); + expline += 3; + } + if (tkimg_PhotoPutBlock(interp, imageHandle, &block, + destX, destY+y, width, 1, TK_PHOTO_COMPOSITE_SET) == TCL_ERROR) { + goto error; + } + expline = block.pixelPtr; + } + break; + default: + sprintf(buf,"%d", numBits); + Tcl_AppendResult(interp, buf, + "-bits BMP file not (yet) supported", (char *) NULL); + goto error; + } + } else { /* RLE Compression */ + int i, j, c; + unsigned char howMuch; + unsigned char rleBuf[2]; + unsigned char rleDelta[2]; + unsigned char val; + + x = srcX; + y = fileHeight - 1; + block.pixelPtr = expline = (unsigned char *) ckalloc (3*fileWidth); + + if (numBits != 4 && numBits != 8) { + sprintf (buf, "%d", numBits); + Tcl_AppendResult(interp, "RLE compression not supported for ", + buf, "-bit pixel values", (char *) NULL); + goto error; + } + + while (1) { + if (2 != tkimg_Read(handle, (char *)rleBuf, 2)) { + Tcl_AppendResult(interp, "Unexpected EOF", (char *) NULL); + goto error; + } + /* printf("In: (%d %X) --> \n", rleBuf[0], rleBuf[1]); */ + if (rleBuf[0] != 0) { + howMuch = rleBuf[0]; + switch (numBits) { + case 8: { + for (i=0; i> 4; + } + memcpy(expline, colorMap + 3*c, 3); + if (x>=srcX+width-1) { + break; + } + expline += 3; + } + break; + } + } + } else { + if (rleBuf[1]>2) { + /* uncompressed record */ + howMuch = rleBuf[1]; + /* printf ("Uncompressed: %d\n", howMuch); fflush (stdout); */ + switch (numBits) { + case 8: { + for (i=0; i> 4; + } + memcpy(expline, colorMap + 3*c, 3); + if (x>=srcX+width-1) { + break; + } + expline += 3; + } + } + break; + } + } + + if ((howMuch % 2) && (numBits==4)) { + howMuch++; + } + + if ((howMuch / (8 / numBits)) % 2) { + if (1 != tkimg_Read(handle, (char *)&val, 1)) { + Tcl_AppendResult(interp, "Unexpected EOF", (char *)NULL); + goto error; + } + } + } else if (rleBuf[1]==0) { + /* End of line */ + /* printf("New line: y=%d x=%d\n", y, x); fflush(stdout); */ + if (tkimg_PhotoPutBlock(interp, imageHandle, &block, destX, destY+y, + width, 1, TK_PHOTO_COMPOSITE_SET) == TCL_ERROR) { + goto error; + } + y--; + x = srcX; + expline = block.pixelPtr; + } else if (rleBuf[1]==1) { + /* End of bitmap */ + break; + } else if (rleBuf[1]==2) { + /* Deltarecord */ + /* printf("Deltarecord\n"); fflush(stdout); */ + if (2 != tkimg_Read(handle, (char *) rleDelta, 2)) { + Tcl_AppendResult(interp, "Unexpected EOF", (char *) NULL); + goto error; + } + x += rleDelta[0]; + y += rleDelta[1]; + } + } + } + } + tkimg_ReadBuffer(0); + + if (colorMap) { + ckfree((char *) colorMap); + } + if (line) { + ckfree((char *) line); + } + if (expline) { + ckfree((char *) block.pixelPtr); + } + return TCL_OK ; + +error: + tkimg_ReadBuffer(0); + if (colorMap) { + ckfree((char *) colorMap); + } + if (line) { + ckfree((char *) line); + } + if (expline) { + ckfree((char *) block.pixelPtr); + } + return TCL_ERROR; +} + +static int +CommonWrite(interp, format, handle, blockPtr) + Tcl_Interp *interp; + Tcl_Obj *format; + tkimg_MFile *handle; + Tk_PhotoImageBlock *blockPtr; +{ + int bperline, nbytes, ncolors, i, x, y, greenOffset, blueOffset, alphaOffset; + unsigned char *imagePtr, *pixelPtr; + unsigned char buf[4]; + int colors[256]; + int resX=75*39, resY=75*39; + int objc = 0; + Tcl_Obj **objv = NULL; + + /* Decode resolution parameter -resolution List */ + if (tkimg_ListObjGetElements(interp, format, &objc, &objv) != TCL_OK) { + return TCL_ERROR; + } + /* List parameter given ? */ + if (objc > 1) { + Tcl_Obj *objList; + int nBytes; + double fResX = -1, fResY = -1, fFactor = 0; + char unit = '\0'; + char *c = Tcl_GetStringFromObj(objv[1], &nBytes); + if ((objc > 3) || ((objc == 3) && ((c[0] != '-') || + (c[1] != 'r') || strncmp(c, "-resolution", strlen(c))))) { + Tcl_AppendResult(interp, "invalid format: \"", + tkimg_GetStringFromObj(format, NULL), "\"", (char *) NULL); + return TCL_ERROR; + } + objList = objv[objc-1]; + if (tkimg_ListObjGetElements(interp, objList, &objc, &objv) != TCL_OK) { + return TCL_ERROR; + } + if (!objc || objc > 3) { + Tcl_AppendResult(interp, "Wrong resolution parameters: \"", + tkimg_GetStringFromObj(objList, NULL), "\"", (char *) NULL); + return TCL_ERROR; + } + if (Tcl_GetDoubleFromObj(interp, objv[0], &fResX) != TCL_OK) { + return TCL_ERROR; + } + if ( fResX < 0 || fResX > 1e20 ) { + Tcl_AppendResult(interp, "Wrong resolution: \"", + tkimg_GetStringFromObj(objv[0], NULL), "\"", (char *) NULL); + return TCL_ERROR; + } + /* more than xRes value given ? */ + if (objc > 1) { + /* check last for unit */ + c = Tcl_GetStringFromObj(objv[objc-1], &nBytes); + if ( nBytes == 1 && ( c[0] == 'c' || c[0] == 'i' || c[0] == 'm' || c[0] == 'p') ) { + unit = c[0]; + objc--; + } + if (objc > 2) { + Tcl_AppendResult(interp, "Wrong unit: \"", + tkimg_GetStringFromObj(objv[objc-1], NULL), "\"", (char *) NULL); + return TCL_ERROR; + } + if (objc > 1) { + if (Tcl_GetDoubleFromObj(interp, objv[1], &fResY) != TCL_OK) { + return TCL_ERROR; + } + if ( fResY < 0 || fResY > 1e20 ) { + Tcl_AppendResult(interp, "Wrong resolution: \"", + tkimg_GetStringFromObj(objv[0], NULL), "\"", (char *) NULL); + return TCL_ERROR; + } + } + } + /* Process unit and eventually get factor value */ + switch (unit) { + case 'c': /* centimeter */ + fFactor = 100.0; + break; + case 'i': /* inches */ + fFactor = 1.0/0.0254; + break; + case 'm': /* millimeter */ + fFactor = 1000.0; + break; + case 'p': /* printer points (1/72 inch) */ + fFactor = 72.0/0.0254; + break; + default: /* no unit given - 75*39 as X resolution */ + if (fResX == 0) { + resX = 0; + resY = 0; + } else { + if (fResY != -1) { + resY = (int) ( fResY * 75.0*39.0 / fResX + 0.5); + } + } + break; + } + if (fFactor != 0) { + resX = (int) ( fResX * fFactor + 0.5); + if (fResY == -1) { + resY = resX; + } else { + resY = (int) ( fResY * fFactor + 0.5); + } + } + } + + greenOffset = blockPtr->offset[1] - blockPtr->offset[0]; + blueOffset = blockPtr->offset[2] - blockPtr->offset[0]; + alphaOffset = blockPtr->offset[0]; + if (alphaOffset < blockPtr->offset[2]) { + alphaOffset = blockPtr->offset[2]; + } + if (++alphaOffset < blockPtr->pixelSize) { + alphaOffset -= blockPtr->offset[0]; + } else { + alphaOffset = 0; + } + ncolors = 0; + for (y = 0; ncolors <= 256 && y < blockPtr->height; y++) { + pixelPtr = blockPtr->pixelPtr + y*blockPtr->pitch + blockPtr->offset[0]; + for (x=0; ncolors <= 256 && xwidth; x++) { + int pixel; + if (alphaOffset && (pixelPtr[alphaOffset] == 0)) + pixel = 0xd9d9d9; + else + pixel = (pixelPtr[0]<<16) | (pixelPtr[greenOffset]<<8) | pixelPtr[blueOffset]; + for (i = 0; i < ncolors && pixel != colors[i]; i++); + if (i == ncolors) { + if (ncolors < 256) { + colors[ncolors] = pixel; + } + ncolors++; + } + pixelPtr += blockPtr->pixelSize; + } + } + if (ncolors <= 256 && (blockPtr->width * blockPtr->height >= 512)) { + while (ncolors < 256) { + colors[ncolors++] = 0; + } + nbytes = 1; + } else { + nbytes = 3; + ncolors = 0; + } + + bperline = ((blockPtr->width * nbytes + 3) / 4) * 4; + + tkimg_Write(handle,"BM", 2); + putint(handle, 54 + (ncolors*4) + bperline * blockPtr->height); + putint(handle, 0); + putint(handle, 54 + (ncolors*4)); + putint(handle, 40); + putint(handle, blockPtr->width); + putint(handle, blockPtr->height); + putint(handle, 1 + (nbytes<<19)); + putint(handle, 0); + putint(handle, bperline * blockPtr->height); + putint(handle, resX); + putint(handle, resY); + putint(handle, ncolors); + putint(handle, ncolors); + + for (i = 0; i < ncolors ; i++) { + putint(handle, colors[i]); + } + + bperline -= blockPtr->width * nbytes; + + imagePtr = blockPtr->pixelPtr + blockPtr->offset[0] + + blockPtr->height * blockPtr->pitch; + for (y = 0; y < blockPtr->height; y++) { + pixelPtr = imagePtr -= blockPtr->pitch; + for (x=0; xwidth; x++) { + if (ncolors) { + int pixel; + if (alphaOffset && (pixelPtr[alphaOffset] == 0)) + pixel = 0xd9d9d9; + else + pixel = (pixelPtr[0]<<16)|(pixelPtr[greenOffset]<<8)|pixelPtr[blueOffset]; + for (i = 0; i < ncolors && pixel != colors[i]; i += 1); + buf[0] = i; + } else if (alphaOffset && (pixelPtr[alphaOffset] == 0)) { + buf[0] = buf[1] = buf[2] = 0xd9; + } else { + buf[0] = pixelPtr[blueOffset]; + buf[1] = pixelPtr[greenOffset]; + buf[2] = pixelPtr[0]; + } + tkimg_Write(handle, (char *) buf, nbytes); + pixelPtr += blockPtr->pixelSize; + } + if (bperline) { + tkimg_Write(handle, "\0\0\0", bperline); + } + } + return(TCL_OK); +} + +static void +putint(handle, i) + tkimg_MFile *handle; + int i; +{ + unsigned char buf[4]; + buf[0] = i; + buf[1] = i>>8; + buf[2] = i>>16; + buf[3] = i>>24; + tkimg_Write(handle, (char *) buf, 4); +} diff --git a/bmp/bmp.txt b/bmp/bmp.txt new file mode 100755 index 0000000..9124091 --- /dev/null +++ b/bmp/bmp.txt @@ -0,0 +1,1034 @@ +Graphics File Formats + +This topic describes the graphics-file formats used by the Microsoft Windows +operating system. Graphics files include bitmap files, icon-resource files, +and cursor-resource files. + +Bitmap-File Formats + +Windows bitmap files are stored in a device-independent bitmap (DIB) format +that allows Windows to display the bitmap on any type of display device. The +term "device independent" means that the bitmap specifies pixel color in a +form independent of the method used by a display to represent color. The +default filename extension of a Windows DIB file is .BMP. + +Bitmap-File Structures + +Each bitmap file contains a bitmap-file header, a bitmap-information header, +a color table, and an array of bytes that defines the bitmap bits. The file +has the following form: + +BITMAPFILEHEADER bmfh; +BITMAPINFOHEADER bmih; +RGBQUAD aColors[]; +BYTE aBitmapBits[]; + +The bitmap-file header contains information about the type, size, and layout +of a device-independent bitmap file. The header is defined as a +BITMAPFILEHEADER structure. + +The bitmap-information header, defined as a BITMAPINFOHEADER structure, +specifies the dimensions, compression type, and color format for the bitmap. + +The color table, defined as an array of RGBQUAD structures, contains as many +elements as there are colors in the bitmap. The color table is not present +for bitmaps with 24 color bits because each pixel is represented by 24-bit +red-green-blue (RGB) values in the actual bitmap data area. The colors in the +table should appear in order of importance. This helps a display driver +render a bitmap on a device that cannot display as many colors as there are +in the bitmap. If the DIB is in Windows version 3.0 or later format, the +driver can use the biClrImportant member of the BITMAPINFOHEADER structure to +determine which colors are important. + +The BITMAPINFO structure can be used to represent a combined +bitmap-information header and color table. The bitmap bits, immediately +following the color table, consist of an array of BYTE values representing +consecutive rows, or "scan lines," of the bitmap. Each scan line consists of +consecutive bytes representing the pixels in the scan line, in left-to-right +order. The number of bytes representing a scan line depends on the color +format and the width, in pixels, of the bitmap. If necessary, a scan line +must be zero-padded to end on a 32-bit boundary. However, segment boundaries +can appear anywhere in the bitmap. The scan lines in the bitmap are stored +from bottom up. This means that the first byte in the array represents the +pixels in the lower-left corner of the bitmap and the last byte represents +the pixels in the upper-right corner. + +The biBitCount member of the BITMAPINFOHEADER structure determines the number +of bits that define each pixel and the maximum number of colors in the +bitmap. These members can have any of the following values: + +Value Meaning + +1 Bitmap is monochrome and the color table contains two entries. Each +bit in the bitmap array represents a pixel. If the bit is clear, the pixel is +displayed with the color of the first entry in the color table. If the bit is +set, the pixel has the color of the second entry in the table. + +4 Bitmap has a maximum of 16 colors. Each pixel in the bitmap is +represented by a 4-bit index into the color table. For example, if the first +byte in the bitmap is 0x1F, the byte represents two pixels. The first pixel +contains the color in the second table entry, and the second pixel contains +the color in the sixteenth table entry. + +8 Bitmap has a maximum of 256 colors. Each pixel in the bitmap is +represented by a 1-byte index into the color table. For example, if the first +byte in the bitmap is 0x1F, the first pixel has the color of the +thirty-second table entry. + +24 Bitmap has a maximum of 2^24 colors. The bmiColors (or bmciColors) +member is NULL, and each 3-byte sequence in the bitmap array represents the +relative intensities of red, green, and blue, respectively, for a pixel. + +The biClrUsed member of the BITMAPINFOHEADER structure specifies the number +of color indexes in the color table actually used by the bitmap. If the +biClrUsed member is set to zero, the bitmap uses the maximum number of colors +corresponding to the value of the biBitCount member. An alternative form of +bitmap file uses the BITMAPCOREINFO, BITMAPCOREHEADER, and RGBTRIPLE +structures. + +Bitmap Compression + +Windows versions 3.0 and later support run-length encoded (RLE) formats for +compressing bitmaps that use 4 bits per pixel and 8 bits per pixel. +Compression reduces the disk and memory storage required for a bitmap. + +Compression of 8-Bits-per-Pixel Bitmaps + +When the biCompression member of the BITMAPINFOHEADER structure is set to +BI_RLE8, the DIB is compressed using a run-length encoded format for a +256-color bitmap. This format uses two modes: encoded mode and absolute mode. +Both modes can occur anywhere throughout a single bitmap. + +Encoded Mode + +A unit of information in encoded mode consists of two bytes. The first byte +specifies the number of consecutive pixels to be drawn using the color index +contained in the second byte. The first byte of the pair can be set to zero +to indicate an escape that denotes the end of a line, the end of the bitmap, +or a delta. The interpretation of the escape depends on the value of the +second byte of the pair, which must be in the range 0x00 through 0x02. +Following are the meanings of the escape values that can be used in the +second byte: + +Second byte Meaning + +0 End of line. +1 End of bitmap. +2 Delta. The two bytes following the escape contain unsigned values +indicating the horizontal and vertical offsets of the next pixel from the +current position. + +Absolute Mode + +Absolute mode is signaled by the first byte in the pair being set to zero and +the second byte to a value between 0x03 and 0xFF. The second byte represents +the number of bytes that follow, each of which contains the color index of a +single pixel. Each run must be aligned on a word boundary. Following is an +example of an 8-bit RLE bitmap (the two-digit hexadecimal values in the +second column represent a color index for a single pixel): + +Compressed data Expanded data + +03 04 04 04 04 +05 06 06 06 06 06 06 +00 03 45 56 67 00 45 56 67 +02 78 78 78 +00 02 05 01 Move 5 right and 1 down +02 78 78 78 +00 00 End of line +09 1E 1E 1E 1E 1E 1E 1E 1E 1E 1E +00 01 End of RLE bitmap + +Compression of 4-Bits-per-Pixel Bitmaps + +When the biCompression member of the BITMAPINFOHEADER structure is set to +BI_RLE4, the DIB is compressed using a run-length encoded format for a +16-color bitmap. This format uses two modes: encoded mode and absolute mode. + +Encoded Mode + +A unit of information in encoded mode consists of two bytes. The first byte +of the pair contains the number of pixels to be drawn using the color indexes +in the second byte. + +The second byte contains two color indexes, one in its high-order nibble +(that is, its low-order 4 bits) and one in its low-order nibble. + +The first pixel is drawn using the color specified by the high-order nibble, +the second is drawn using the color in the low-order nibble, the third is +drawn with the color in the high-order nibble, and so on, until all the +pixels specified by the first byte have been drawn. + +The first byte of the pair can be set to zero to indicate an escape that +denotes the end of a line, the end of the bitmap, or a delta. The +interpretation of the escape depends on the value of the second byte of the +pair. In encoded mode, the second byte has a value in the range 0x00 through +0x02. The meaning of these values is the same as for a DIB with 8 bits per +pixel. + +Absolute Mode + +In absolute mode, the first byte contains zero, the second byte contains the +number of color indexes that follow, and subsequent bytes contain color +indexes in their high- and low-order nibbles, one color index for each pixel. +Each run must be aligned on a word boundary. + +Following is an example of a 4-bit RLE bitmap (the one-digit hexadecimal +values in the second column represent a color index for a single pixel): + +Compressed data Expanded data + +03 04 0 4 0 +05 06 0 6 0 6 0 +00 06 45 56 67 00 4 5 5 6 6 7 +04 78 7 8 7 8 +00 02 05 01 Move 5 right and 1 down +04 78 7 8 7 8 +00 00 End of line +09 1E 1 E 1 E 1 E 1 E 1 +00 01 End of RLE bitmap + +Bitmap Example + +The following example is a text dump of a 16-color bitmap (4 bits per pixel): + +Win3DIBFile + BitmapFileHeader + Type 19778 + Size 3118 + Reserved1 0 + Reserved2 0 + OffsetBits 118 + BitmapInfoHeader + Size 40 + Width 80 + Height 75 + Planes 1 + BitCount 4 + Compression 0 + SizeImage 3000 + + XPelsPerMeter 0 + YPelsPerMeter 0 + ColorsUsed 16 + ColorsImportant 16 + Win3ColorTable + Blue Green Red Unused +[00000000] 84 252 84 0 +[00000001] 252 252 84 0 +[00000002] 84 84 252 0 +[00000003] 252 84 252 0 +[00000004] 84 252 252 0 +[00000005] 252 252 252 0 +[00000006] 0 0 0 0 +[00000007] 168 0 0 0 +[00000008] 0 168 0 0 +[00000009] 168 168 0 0 +[0000000A] 0 0 168 0 +[0000000B] 168 0 168 0 +[0000000C] 0 168 168 0 +[0000000D] 168 168 168 0 +[0000000E] 84 84 84 0 +[0000000F] 252 84 84 0 + Image + . + . Bitmap data + . + +Icon-Resource File Format + +An icon-resource file contains image data for icons used by Windows +applications. The file consists of an icon directory identifying the number +and types of icon images in the file, plus one or more icon images. The +default filename extension for an icon-resource file is .ICO. + +Icon Directory + +Each icon-resource file starts with an icon directory. The icon directory, +defined as an ICONDIR structure, specifies the number of icons in the +resource and the dimensions and color format of each icon image. The ICONDIR +structure has the following form: + + + +typedef struct ICONDIR { + WORD idReserved; + WORD idType; + WORD idCount; + ICONDIRENTRY idEntries[1]; +} ICONHEADER; + +Following are the members in the ICONDIR structure: + +idReserved Reserved; must be zero. +idType Specifies the resource type. This member is set to 1. +idCount Specifies the number of entries in the directory. +idEntries Specifies an array of ICONDIRENTRY structures containing +information about individual icons. The idCount member specifies the number +of structures in the array. + +The ICONDIRENTRY structure specifies the dimensions and color format for an +icon. The structure has the following form: + + + +struct IconDirectoryEntry { + BYTE bWidth; + BYTE bHeight; + BYTE bColorCount; + BYTE bReserved; + WORD wPlanes; + WORD wBitCount; + DWORD dwBytesInRes; + DWORD dwImageOffset; +}; + +Following are the members in the ICONDIRENTRY structure: + +bWidth Specifies the width of the icon, in pixels. Acceptable values +are 16, 32, and 64. + +bHeight Specifies the height of the icon, in pixels. Acceptable +values are 16, 32, and 64. + +bColorCount Specifies the number of colors in the icon. Acceptable values +are 2, 8, and 16. + +bReserved Reserved; must be zero. +wPlanes Specifies the number of color planes in the icon bitmap. +wBitCount Specifies the number of bits in the icon bitmap. +dwBytesInRes Specifies the size of the resource, in bytes. +dwImageOffset Specifies the offset, in bytes, from the beginning of the +file to the icon image. + +Icon Image + +Each icon-resource file contains one icon image for each image identified in +the icon directory. An icon image consists of an icon-image header, a color +table, an XOR mask, and an AND mask. The icon image has the following form: + + + +BITMAPINFOHEADER icHeader; +RGBQUAD icColors[]; +BYTE icXOR[]; +BYTE icAND[]; + +The icon-image header, defined as a BITMAPINFOHEADER structure, specifies the +dimensions and color format of the icon bitmap. Only the biSize through +biBitCount members and the biSizeImage member are used. All other members +(such as biCompression and biClrImportant) must be set to zero. + +The color table, defined as an array of RGBQUAD structures, specifies the +colors used in the XOR mask. As with the color table in a bitmap file, the +biBitCount member in the icon-image header determines the number of elements +in the array. For more information about the color table, see Section 1.1, +"Bitmap-File Formats." + +The XOR mask, immediately following the color table, is an array of BYTE +values representing consecutive rows of a bitmap. The bitmap defines the +basic shape and color of the icon image. As with the bitmap bits in a bitmap +file, the bitmap data in an icon-resource file is organized in scan lines, +with each byte representing one or more pixels, as defined by the color +format. For more information about these bitmap bits, see Section 1.1, +"Bitmap-File Formats." + +The AND mask, immediately following the XOR mask, is an array of BYTE values, +representing a monochrome bitmap with the same width and height as the XOR +mask. The array is organized in scan lines, with each byte representing 8 +pixels. + +When Windows draws an icon, it uses the AND and XOR masks to combine the icon +image with the pixels already on the display surface. Windows first applies +the AND mask by using a bitwise AND operation; this preserves or removes +existing pixel color. Windows then applies the XOR mask by using a bitwise +XOR operation. This sets the final color for each pixel. + +The following illustration shows the XOR and AND masks that create a +monochrome icon (measuring 8 pixels by 8 pixels) in the form of an uppercase +K: + +Windows Icon Selection + +Windows detects the resolution of the current display and matches it against +the width and height specified for each version of the icon image. If Windows +determines that there is an exact match between an icon image and the current +device, it uses the matching image. Otherwise, it selects the closest match +and stretches the image to the proper size. + +If an icon-resource file contains more than one image for a particular +resolution, Windows uses the icon image that most closely matches the color +capabilities of the current display. If no image matches the device +capabilities exactly, Windows selects the image that has the greatest number +of colors without exceeding the number of display colors. If all images +exceed the color capabilities of the current display, Windows uses the icon +image with the least number of colors. + + + +Cursor-Resource File Format + +A cursor-resource file contains image data for cursors used by Windows +applications. The file consists of a cursor directory identifying the number +and types of cursor images in the file, plus one or more cursor images. The +default filename extension for a cursor-resource file is .CUR. + +Cursor Directory + +Each cursor-resource file starts with a cursor directory. The cursor +directory, defined as a CURSORDIR structure, specifies the number of cursors +in the file and the dimensions and color format of each cursor image. The +CURSORDIR structure has the following form: + + +typedef struct _CURSORDIR { + WORD cdReserved; + WORD cdType; + WORD cdCount; + CURSORDIRENTRY cdEntries[]; +} CURSORDIR; + +Following are the members in the CURSORDIR structure: + +cdReserved Reserved; must be zero. +cdType Specifies the resource type. This member must be set to 2. +cdCount Specifies the number of cursors in the file. +cdEntries Specifies an array of CURSORDIRENTRY structures containing +information about individual cursors. The cdCount member specifies the number +of structures in the array. + +A CURSORDIRENTRY structure specifies the dimensions and color format of a +cursor image. The structure has the following form: + + + +typedef struct _CURSORDIRENTRY { + BYTE bWidth; + BYTE bHeight; + BYTE bColorCount; + BYTE bReserved; + WORD wXHotspot; + WORD wYHotspot; + DWORD lBytesInRes; + DWORD dwImageOffset; +} CURSORDIRENTRY; + +Following are the members in the CURSORDIRENTRY structure: + +bWidth Specifies the width of the cursor, in pixels. +bHeight Specifies the height of the cursor, in pixels. +bColorCount Reserved; must be zero. +bReserved Reserved; must be zero. +wXHotspot Specifies the x-coordinate, in pixels, of the hot spot. +wYHotspot Specifies the y-coordinate, in pixels, of the hot spot. +lBytesInRes Specifies the size of the resource, in bytes. +dwImageOffset Specifies the offset, in bytes, from the start of the file to +the cursor image. + +Cursor Image + +Each cursor-resource file contains one cursor image for each image identified +in the cursor directory. A cursor image consists of a cursor-image header, a +color table, an XOR mask, and an AND mask. The cursor image has the following +form: + + + +BITMAPINFOHEADER crHeader; +RGBQUAD crColors[]; +BYTE crXOR[]; +BYTE crAND[]; + +The cursor hot spot is a single pixel in the cursor bitmap that Windows uses +to track the cursor. The crXHotspot and crYHotspot members specify the x- and +y-coordinates of the cursor hot spot. These coordinates are 16-bit integers. + +The cursor-image header, defined as a BITMAPINFOHEADER structure, specifies +the dimensions and color format of the cursor bitmap. Only the biSize through +biBitCount members and the biSizeImage member are used. The biHeight member +specifies the combined height of the XOR and AND masks for the cursor. This +value is twice the height of the XOR mask. The biPlanes and biBitCount +members must be 1. All other members (such as biCompression and +biClrImportant) must be set to zero. + +The color table, defined as an array of RGBQUAD structures, specifies the +colors used in the XOR mask. For a cursor image, the table contains exactly +two structures, since the biBitCount member in the cursor-image header is +always 1. + +The XOR mask, immediately following the color table, is an array of BYTE +values representing consecutive rows of a bitmap. The bitmap defines the +basic shape and color of the cursor image. As with the bitmap bits in a +bitmap file, the bitmap data in a cursor-resource file is organized in scan +lines, with each byte representing one or more pixels, as defined by the +color format. For more information about these bitmap bits, see Section 1.1, +"Bitmap-File Formats." + +The AND mask, immediately following the XOR mask, is an array of BYTE values +representing a monochrome bitmap with the same width and height as the XOR +mask. The array is organized in scan lines, with each byte representing 8 +pixels. + +When Windows draws a cursor, it uses the AND and XOR masks to combine the +cursor image with the pixels already on the display surface. Windows first +applies the AND mask by using a bitwise AND operation; this preserves or +removes existing pixel color. Window then applies the XOR mask by using a +bitwise XOR operation. This sets the final color for each pixel. + +The following illustration shows the XOR and the AND masks that create a +cursor (measuring 8 pixels by 8 pixels) in the form of an arrow: + +Following are the bit-mask values necessary to produce black, white, +inverted, and transparent results: + +Pixel result AND maskXOR mask + +Black 0 0 +White 0 1 +Transparent 1 0 +Inverted1 1 + +Windows Cursor Selection + +If a cursor-resource file contains more than one cursor image, Windows +determines the best match for a particular display by examining the width and +height of the cursor images. + + +============================================================================== + + +BITMAPFILEHEADER (3.0) + + + +typedef struct tagBITMAPFILEHEADER { /* bmfh */ + UINT bfType; + DWORD bfSize; + UINT bfReserved1; + UINT bfReserved2; + DWORD bfOffBits; +} BITMAPFILEHEADER; + +The BITMAPFILEHEADER structure contains information about the type, size, and +layout of a device-independent bitmap (DIB) file. + +Member Description + +bfType Specifies the type of file. This member must be BM. +bfSize Specifies the size of the file, in bytes. +bfReserved1 Reserved; must be set to zero. +bfReserved2 Reserved; must be set to zero. +bfOffBits Specifies the byte offset from the BITMAPFILEHEADER structure +to the actual bitmap data in the file. + +Comments + +A BITMAPINFO or BITMAPCOREINFO structure immediately follows the +BITMAPFILEHEADER structure in the DIB file. + +See Also + +BITMAPCOREINFO, BITMAPINFO + + +============================================================================== +BITMAPINFO (3.0) + + + +typedef struct tagBITMAPINFO { /* bmi */ + BITMAPINFOHEADER bmiHeader; + RGBQUAD bmiColors[1]; +} BITMAPINFO; + +The BITMAPINFO structure fully defines the dimensions and color information +for a Windows 3.0 or later device-independent bitmap (DIB). + +Member Description + +bmiHeader Specifies a BITMAPINFOHEADER structure that contains +information about the dimensions and color format of a DIB. + +bmiColors Specifies an array of RGBQUAD structures that define the +colors in the bitmap. + +Comments + +A Windows 3.0 or later DIB consists of two distinct parts: a BITMAPINFO +structure, which describes the dimensions and colors of the bitmap, and an +array of bytes defining the pixels of the bitmap. The bits in the array are +packed together, but each scan line must be zero-padded to end on a LONG +boundary. Segment boundaries, however, can appear anywhere in the bitmap. The +origin of the bitmap is the lower-left corner. + +The biBitCount member of the BITMAPINFOHEADER structure determines the number +of bits which define each pixel and the maximum number of colors in the +bitmap. This member may be set to any of the following values: + +Value Meaning + +1 The bitmap is monochrome, and the bmciColors member must contain two +entries. Each bit in the bitmap array represents a pixel. If the bit is +clear, the pixel is displayed with the color of the first entry in the +bmciColors table. If the bit is set, the pixel has the color of the second +entry in the table. + +4 The bitmap has a maximum of 16 colors, and the bmciColors member +contains 16 entries. Each pixel in the bitmap is represented by a four-bit +index into the color table. + +For example, if the first byte in the bitmap is 0x1F, the byte represents two +pixels. The first pixel contains the color in the second table entry, and the +second pixel contains the color in the sixteenth table entry. + +8 The bitmap has a maximum of 256 colors, and the bmciColors member +contains 256 entries. In this case, each byte in the array represents a +single pixel. + +24 The bitmap has a maximum of 2^24 colors. The bmciColors member is +NULL, and each 3-byte sequence in the bitmap array represents the relative +intensities of red, green, and blue, respectively, of a pixel. + +The biClrUsed member of the BITMAPINFOHEADER structure specifies the number +of color indexes in the color table actually used by the bitmap. If the +biClrUsed member is set to zero, the bitmap uses the maximum number of colors +corresponding to the value of the biBitCount member. + +The colors in the bmiColors table should appear in order of importance. +Alternatively, for functions that use DIBs, the bmiColors member can be an +array of 16-bit unsigned integers that specify an index into the currently +realized logical palette instead of explicit RGB values. In this case, an +application using the bitmap must call DIB functions with the wUsage +parameter set to DIB_PAL_COLORS. + +Note: The bmiColors member should not contain palette indexes if the bitmap +is to be stored in a file or transferred to another application. Unless the +application uses the bitmap exclusively and under its complete control, the +bitmap color table should contain explicit RGB values. + +See Also + +BITMAPINFOHEADER, RGBQUAD + +============================================================================== +BITMAPINFOHEADER (3.0) + + + +typedef struct tagBITMAPINFOHEADER { /* bmih */ + DWORD biSize; + LONG biWidth; + LONG biHeight; + WORD biPlanes; + WORD biBitCount; + DWORD biCompression; + DWORD biSizeImage; + LONG biXPelsPerMeter; + LONG biYPelsPerMeter; + DWORD biClrUsed; + DWORD biClrImportant; +} BITMAPINFOHEADER; + +The BITMAPINFOHEADER structure contains information about the dimensions and +color format of a Windows 3.0 or later device-independent bitmap (DIB). + +Member Description + +biSize Specifies the number of bytes required by the +BITMAPINFOHEADER structure. + +biWidth Specifies the width of the bitmap, in pixels. +biHeightSpecifies the height of the bitmap, in pixels. + +biPlanesSpecifies the number of planes for the target device. This +member must be set to 1. + +biBitCount Specifies the number of bits per pixel. This value must be 1, +4, 8, or 24. + +biCompression Specifies the type of compression for a compressed bitmap. It +can be one of the following values: + +Value Meaning + +BI_RGB Specifies that the bitmap is not compressed. + +BI_RLE8 Specifies a run-length encoded format for bitmaps with 8 bits +per pixel. The compression format is a 2-byte format consisting of a count +byte followed by a byte containing a color index. For more information, see +the following Comments section. + +BI_RLE4 Specifies a run-length encoded format for bitmaps with 4 bits +per pixel. The compression format is a 2-byte format consisting of a count +byte followed by two word-length color indexes. For more information, see +the following Comments section. + +biSizeImage Specifies the size, in bytes, of the image. It is valid to +set this member to zero if the bitmap is in the BI_RGB format. + +biXPelsPerMeter Specifies the horizontal resolution, in pixels per meter, of +the target device for the bitmap. An application can use this value to select +a bitmap from a resource group that best matches the characteristics of the +current device. + +biYPelsPerMeter Specifies the vertical resolution, in pixels per meter, of +the target device for the bitmap. + +biClrUsed Specifies the number of color indexes in the color table +actually used by the bitmap. If this value is zero, the bitmap uses the +maximum number of colors corresponding to the value of the biBitCount member. +For more information on the maximum sizes of the color table, see the +description of the BITMAPINFO structure earlier in this topic. + +If the biClrUsed member is nonzero, it specifies the actual number of colors +that the graphics engine or device driver will access if the biBitCount +member is less than 24. If biBitCount is set to 24, biClrUsed specifies the +size of the reference color table used to optimize performance of Windows +color palettes. If the bitmap is a packed bitmap (that is, a bitmap in which +the bitmap array immediately follows the BITMAPINFO header and which is +referenced by a single pointer), the biClrUsed member must be set to zero or +to the actual size of the color table. + +biClrImportant Specifies the number of color indexes that are considered +important for displaying the bitmap. If this value is zero, all colors are +important. + +Comments + +The BITMAPINFO structure combines the BITMAPINFOHEADER structure and a color +table to provide a complete definition of the dimensions and colors of a +Windows 3.0 or later DIB. For more information about specifying a Windows 3.0 +DIB, see the description of the BITMAPINFO structure. + +An application should use the information stored in the biSize member to +locate the color table in a BITMAPINFO structure as follows: + +pColor = ((LPSTR) pBitmapInfo + (WORD) (pBitmapInfo->bmiHeader.biSize)) + +Windows supports formats for compressing bitmaps that define their colors +with 8 bits per pixel and with 4 bits per pixel. Compression reduces the disk +and memory storage required for the bitmap. The following paragraphs describe +these formats. + +BI_RLE8 + +When the biCompression member is set to BI_RLE8, the bitmap is compressed +using a run-length encoding format for an 8-bit bitmap. This format may be +compressed in either of two modes: encoded and absolute. Both modes can occur +anywhere throughout a single bitmap. + +Encoded mode consists of two bytes: the first byte specifies the number of +consecutive pixels to be drawn using the color index contained in the second +byte. In addition, the first byte of the pair can be set to zero to indicate +an escape that denotes an end of line, end of bitmap, or a delta. The +interpretation of the escape depends on the value of the second byte of the +pair. The following list shows the meaning of the second byte: + +Value Meaning + +0 End of line. +1 End of bitmap. +2 Delta. The two bytes following the escape contain unsigned values +indicating the horizontal and vertical offset of the next pixel from the +current position. + +Absolute mode is signaled by the first byte set to zero and the second byte +set to a value between 0x03 and 0xFF. In absolute mode, the second byte +represents the number of bytes that follow, each of which contains the color +index of a single pixel. When the second byte is set to 2 or less, the escape +has the same meaning as in encoded mode. In absolute mode, each run must be +aligned on a word boundary. The following example shows the hexadecimal +values of an 8-bit compressed bitmap: + + + +03 04 05 06 00 03 45 56 67 00 02 78 00 02 05 01 +02 78 00 00 09 1E 00 01 + +This bitmap would expand as follows (two-digit values represent a color index +for a single pixel): + + + +04 04 04 +06 06 06 06 06 +45 56 67 +78 78 +move current position 5 right and 1 down +78 78 +end of line +1E 1E 1E 1E 1E 1E 1E 1E 1E +end of RLE bitmap + +BI_RLE4 + +When the biCompression member is set to BI_RLE4, the bitmap is compressed +using a run-length encoding (RLE) format for a 4-bit bitmap, which also uses +encoded and absolute modes. In encoded mode, the first byte of the pair +contains the number of pixels to be drawn using the color indexes in the +second byte. The second byte contains two color indexes, one in its +high-order nibble (that is, its low-order four bits) and one in its low-order +nibble. The first of the pixels is drawn using the color specified by the +high-order nibble, the second is drawn using the color in the low-order +nibble, the third is drawn with the color in the high-order nibble, and so +on, until all the pixels specified by the first byte have been drawn. In +absolute mode, the first byte contains zero, the second byte contains the +number of color indexes that follow, and subsequent bytes contain color +indexes in their high- and low-order nibbles, one color index for each pixel. +In absolute mode, each run must be aligned on a word boundary. The +end-of-line, end-of-bitmap, and delta escapes also apply to BI_RLE4. + +The following example shows the hexadecimal values of a 4-bit compressed +bitmap: + + + +03 04 05 06 00 06 45 56 67 00 04 78 00 02 05 01 +04 78 00 00 09 1E 00 01 + +This bitmap would expand as follows (single-digit values represent a color +index for a single pixel): + + + +0 4 0 +0 6 0 6 0 +4 5 5 6 6 7 +7 8 7 8 +move current position 5 right and 1 down +7 8 7 8 +end of line +1 E 1 E 1 E 1 E 1 +end of RLE bitmap + +See Also + +BITMAPINFO + +============================================================================== +RGBQUAD (3.0) + + + +typedef struct tagRGBQUAD { /* rgbq */ + BYTE rgbBlue; + BYTE rgbGreen; + BYTE rgbRed; + BYTE rgbReserved; +} RGBQUAD; + +The RGBQUAD structure describes a color consisting of relative intensities of +red, green, and blue. The bmiColors member of the BITMAPINFO structure +consists of an array of RGBQUAD structures. + +Member Description + +rgbBlue Specifies the intensity of blue in the color. +rgbGreenSpecifies the intensity of green in the color. +rgbRed Specifies the intensity of red in the color. +rgbReserved Not used; must be set to zero. + +See Also + +BITMAPINFO + +============================================================================== +RGB (2.x) + +COLORREF RGB(cRed, cGreen, cBlue) + +BYTE cRed; /* red component of color */ +BYTE cGreen; /* green component of color */ +BYTE cBlue; /* blue component of color */ + + +The RGB macro selects an RGB color based on the parameters supplied and the +color capabilities of the output device. + +Parameter Description + +cRed Specifies the intensity of the red color field. +cGreen Specifies the intensity of the green color field. +cBlue Specifies the intensity of the blue color field. + +Returns + +The return value specifies the resultant RGB color. + +Comments + +The intensity for each argument can range from 0 through 255. If all three +intensities are specified as zero, the result is black. If all three +intensities are specified as 255, the result is white. + +Comments + +The RGB macro is defined in WINDOWS.H as follows: + + + +#define RGB(r,g,b) ((COLORREF)(((BYTE)(r)|((WORD)(g)<<8))| \ + (((DWORD)(BYTE)(b))<<16))) + +See Also + +GetBValue, GetGValue, GetRValue, PALETTEINDEX, PALETTERGB + +============================================================================== +BITMAPCOREINFO (3.0) + + + +typedef struct tagBITMAPCOREINFO { /* bmci */ + BITMAPCOREHEADER bmciHeader; + RGBTRIPLE bmciColors[1]; +} BITMAPCOREINFO; + +The BITMAPCOREINFO structure fully defines the dimensions and color +information for a device-independent bitmap (DIB). Windows applications +should use the BITMAPINFO structure instead of BITMAPCOREINFO whenever +possible. + +Member Description + +bmciHeader Specifies a BITMAPCOREHEADER structure that contains +information about the dimensions and color format of a DIB. + +bmciColors Specifies an array of RGBTRIPLE structures that define the +colors in the bitmap. + +Comments + +The BITMAPCOREINFO structure describes the dimensions and colors of a bitmap. +It is followed immediately in memory by an array of bytes which define the +pixels of the bitmap. The bits in the array are packed together, but each +scan line must be zero-padded to end on a LONG boundary. Segment boundaries, +however, can appear anywhere in the bitmap. The origin of the bitmap is the +lower-left corner. + +The bcBitCount member of the BITMAPCOREHEADER structure determines the number +of bits that define each pixel and the maximum number of colors in the +bitmap. This member may be set to any of the following values: + +Value Meaning + +1 The bitmap is monochrome, and the bmciColors member must contain two +entries. Each bit in the bitmap array represents a pixel. If the bit is +clear, the pixel is displayed with the color of the first entry in the +bmciColors table. If the bit is set, the pixel has the color of the second +entry in the table. + +4 The bitmap has a maximum of 16 colors, and the bmciColors member +contains 16 entries. Each pixel in the bitmap is represented by a four-bit +index into the color table. + +For example, if the first byte in the bitmap is 0x1F, the byte represents two +pixels. The first pixel contains the color in the second table entry, and the +second pixel contains the color in the sixteenth table entry. + +8 The bitmap has a maximum of 256 colors, and the bmciColors member +contains 256 entries. In this case, each byte in the array represents a +single pixel. + +24 The bitmap has a maximum of 2^24 colors. The bmciColors member is +NULL, and each 3-byte sequence in the bitmap array represents the relative +intensities of red, green, and blue, respectively, of a pixel. + +The colors in the bmciColors table should appear in order of importance. +Alternatively, for functions that use DIBs, the bmciColors member can be an +array of 16-bit unsigned integers that specify an index into the currently +realized logical palette instead of explicit RGB values. In this case, an +application using the bitmap must call DIB functions with the wUsage +parameter set to DIB_PAL_COLORS. + +Note: The bmciColors member should not contain palette indexes if the +bitmap is to be stored in a file or transferred to another application. +Unless the application uses the bitmap exclusively and under its complete +control, the bitmap color table should contain explicit RGB values. + +See Also + +BITMAPINFO, BITMAPCOREHEADER, RGBTRIPLE + + +============================================================================== +BITMAPCOREHEADER (3.0) + + + +typedef struct tagBITMAPCOREHEADER { /* bmch */ + DWORD bcSize; + short bcWidth; + short bcHeight; + WORD bcPlanes; + WORD bcBitCount; +} BITMAPCOREHEADER; + +The BITMAPCOREHEADER structure contains information about the dimensions and +color format of a device-independent bitmap (DIB). Windows applications +should use the BITMAPINFOHEADER structure instead of BITMAPCOREHEADER +whenever possible. + +Member Description + +bcSize Specifies the number of bytes required by the +BITMAPCOREHEADER structure. + +bcWidth Specifies the width of the bitmap, in pixels. +bcHeightSpecifies the height of the bitmap, in pixels. + +bcPlanesSpecifies the number of planes for the target device. This +member must be set to 1. + +bcBitCount Specifies the number of bits per pixel. This value must be 1, +4, 8, or 24. + +Comments + +The BITMAPCOREINFO structure combines the BITMAPCOREHEADER structure and a +color table to provide a complete definition of the dimensions and colors of +a DIB. See the description of the BITMAPCOREINFO structure for more +information about specifying a DIB. + +An application should use the information stored in the bcSize member to +locate the color table in a BITMAPCOREINFO structure with a method such as +the following: + + + +lpColor = ((LPSTR) pBitmapCoreInfo + (UINT) (pBitmapCoreInfo->bcSize)) + +See Also + +BITMAPCOREINFO, BITMAPINFOHEADER, BITMAPINFOHEADER + +============================================================================= +RGBTRIPLE (3.0) + + + +typedef struct tagRGBTRIPLE { /* rgbt */ + BYTE rgbtBlue; + BYTE rgbtGreen; + BYTE rgbtRed; +} RGBTRIPLE; + +The RGBTRIPLE structure describes a color consisting of relative intensities +of red, green, and blue. The bmciColors member of the BITMAPCOREINFO +structure consists of an array of RGBTRIPLE structures. Windows applications +should use the BITMAPINFO structure instead of BITMAPCOREINFO whenever +possible. The BITMAPINFO structure uses an RGBQUAD structure instead of the +RGBTRIPLE structure. + +Member Description + +rgbtBlueSpecifies the intensity of blue in the color. +rgbtGreen Specifies the intensity of green in the color. +rgbtRed Specifies the intensity of red in the color. + +See Also + +BITMAPCOREINFO, BITMAPINFO, RGBQUAD + +============================================================================== diff --git a/bmp/configure b/bmp/configure new file mode 100755 index 0000000..27ecde6 --- /dev/null +++ b/bmp/configure @@ -0,0 +1,13478 @@ +#! /bin/sh +# From configure.in Id: configure.in 373 2014-12-27 21:28:34Z obermeier . +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.59 for tkimgbmp 1.4.6. +# +# Copyright (C) 2003 Free Software Foundation, Inc. +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then + set -o posix +fi +DUALCASE=1; export DUALCASE # for MKS sh + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)$' \| \ + . : '\(.\)' 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } + /^X\/\(\/\/\)$/{ s//\1/; q; } + /^X\/\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + + +# PATH needs CR, and LINENO needs CR and PATH. +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done + + ;; + esac + # We did not find ourselves, most probably we were run as `sh COMMAND' + # in which case we are not to be found in the path. + if test "x$as_myself" = x; then + as_myself=$0 + fi + if test ! -f "$as_myself"; then + { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 + { (exit 1); exit 1; }; } + fi + case $CONFIG_SHELL in + '') + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for as_base in sh bash ksh sh5; do + case $as_dir in + /*) + if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } + CONFIG_SHELL=$as_dir/$as_base + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" ${1+"$@"} + fi;; + esac + done +done +;; + esac + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line before each line; the second 'sed' does the real + # work. The second script uses 'N' to pair each line-number line + # with the numbered line, and appends trailing '-' during + # substitution so that $LINENO is not a special case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) + sed '=' <$as_myself | + sed ' + N + s,$,-, + : loop + s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + t loop + s,-$,, + s,^['$as_cr_digits']*\n,, + ' >$as_me.lineno && + chmod +x $as_me.lineno || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensible to this). + . ./$as_me.lineno + # Exit status is that of the last command. + exit +} + + +case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' +' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +esac + +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + # We could just check for DJGPP; but this test a) works b) is more generic + # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). + if test -f conf$$.exe; then + # Don't use ln at all; we don't have any links + as_ln_s='cp -p' + else + as_ln_s='ln -s' + fi +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.file + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_executable_p="test -f" + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +# IFS +# We need space, tab and new line, in precisely that order. +as_nl=' +' +IFS=" $as_nl" + +# CDPATH. +$as_unset CDPATH + + +# Name of the host. +# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +exec 6>&1 + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_config_libobj_dir=. +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} + +# Maximum number of lines to put in a shell here document. +# This variable seems obsolete. It should probably be removed, and +# only ac_max_sed_lines should be used. +: ${ac_max_here_lines=38} + +# Identity of this package. +PACKAGE_NAME='tkimgbmp' +PACKAGE_TARNAME='tkimgbmp' +PACKAGE_VERSION='1.4.6' +PACKAGE_STRING='tkimgbmp 1.4.6' +PACKAGE_BUGREPORT='' + +# Factoring default headers for most tests. +ac_includes_default="\ +#include +#if HAVE_SYS_TYPES_H +# include +#endif +#if HAVE_SYS_STAT_H +# include +#endif +#if STDC_HEADERS +# include +# include +#else +# if HAVE_STDLIB_H +# include +# endif +#endif +#if HAVE_STRING_H +# if !STDC_HEADERS && HAVE_MEMORY_H +# include +# endif +# include +#endif +#if HAVE_STRINGS_H +# include +#endif +#if HAVE_INTTYPES_H +# include +#else +# if HAVE_STDINT_H +# include +# endif +#endif +#if HAVE_UNISTD_H +# include +#endif" + +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS CYGPATH EXEEXT PKG_LIB_FILE PKG_STUB_LIB_FILE PKG_STUB_SOURCES PKG_STUB_OBJECTS PKG_TCL_SOURCES PKG_HEADERS PKG_INCLUDES PKG_LIBS PKG_CFLAGS PACKAGE_TCLNAME TCL_VERSION TCL_PATCH_LEVEL TCL_BIN_DIR TCL_SRC_DIR TCL_LIB_FILE TCL_LIB_FLAG TCL_LIB_SPEC TCL_STUB_LIB_FILE TCL_STUB_LIB_FLAG TCL_STUB_LIB_SPEC CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC OBJEXT CLEANFILES TCL_LIBS TCL_DEFS TCL_EXTRA_CFLAGS TCL_LD_FLAGS TCL_SHLIB_LD_LIBS TK_VERSION TK_BIN_DIR TK_SRC_DIR TK_LIB_FILE TK_LIB_FLAG TK_LIB_SPEC TK_STUB_LIB_FILE TK_STUB_LIB_FLAG TK_STUB_LIB_SPEC TK_LIBS TK_XINCLUDES CPP INSTALL INSTALL_DATA_DIR INSTALL_DATA INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_LIBRARY SET_MAKE RANLIB ac_ct_RANLIB EGREP MATH_LIBS tkimg_VERSION tkimg_BIN_DIR tkimg_SRC_DIR tkimg_LIB_FILE tkimg_LIB_SPEC tkimg_STUB_LIB_FILE tkimg_STUB_LIB_SPEC tkimg_STUB_LIB_PATH tkimg_SRC_PATH tkimg_BUILD_PATH PKG_SOURCES PKG_OBJECTS TCL_INCLUDES TK_INCLUDES TCL_THREADS SHARED_BUILD AR ac_ct_AR CELIB_DIR RC ac_ct_RC CFLAGS_DEBUG CFLAGS_OPTIMIZE CFLAGS_WARNING STLIB_LD SHLIB_LD SHLIB_LD_LIBS SHLIB_CFLAGS LD_LIBRARY_PATH_VAR CFLAGS_DEFAULT LDFLAGS_DEFAULT TCL_DBGX MAKE_LIB MAKE_SHARED_LIB MAKE_STATIC_LIB MAKE_STUB_LIB RANLIB_STUB VC_MANIFEST_EMBED_DLL VC_MANIFEST_EMBED_EXE TCLSH_PROG WISH_PROG LIBOBJS LTLIBOBJS' +ac_subst_files='' + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datadir='${prefix}/share' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +libdir='${exec_prefix}/lib' +includedir='${prefix}/include' +oldincludedir='/usr/include' +infodir='${prefix}/info' +mandir='${prefix}/man' + +ac_prev= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval "$ac_prev=\$ac_option" + ac_prev= + continue + fi + + ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_option in + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad | --data | --dat | --da) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ + | --da=*) + datadir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/-/_/g'` + eval "enable_$ac_feature=no" ;; + + -enable-* | --enable-*) + ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/-/_/g'` + case $ac_option in + *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; + *) ac_optarg=yes ;; + esac + eval "enable_$ac_feature='$ac_optarg'" ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst \ + | --locals | --local | --loca | --loc | --lo) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* \ + | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package| sed 's/-/_/g'` + case $ac_option in + *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; + *) ac_optarg=yes ;; + esac + eval "with_$ac_package='$ac_optarg'" ;; + + -without-* | --without-*) + ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package | sed 's/-/_/g'` + eval "with_$ac_package=no" ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) { echo "$as_me: error: unrecognized option: $ac_option +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } + ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` + eval "$ac_envvar='$ac_optarg'" + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + { echo "$as_me: error: missing argument to $ac_option" >&2 + { (exit 1); exit 1; }; } +fi + +# Be sure to have absolute paths. +for ac_var in exec_prefix prefix +do + eval ac_val=$`echo $ac_var` + case $ac_val in + [\\/$]* | ?:[\\/]* | NONE | '' ) ;; + *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; };; + esac +done + +# Be sure to have absolute paths. +for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ + localstatedir libdir includedir oldincludedir infodir mandir +do + eval ac_val=$`echo $ac_var` + case $ac_val in + [\\/$]* | ?:[\\/]* ) ;; + *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; };; + esac +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used." >&2 + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then its parent. + ac_confdir=`(dirname "$0") 2>/dev/null || +$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$0" : 'X\(//\)[^/]' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$0" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r $srcdir/$ac_unique_file; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r $srcdir/$ac_unique_file; then + if test "$ac_srcdir_defaulted" = yes; then + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 + { (exit 1); exit 1; }; } + else + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } + fi +fi +(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || + { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 + { (exit 1); exit 1; }; } +srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` +ac_env_build_alias_set=${build_alias+set} +ac_env_build_alias_value=$build_alias +ac_cv_env_build_alias_set=${build_alias+set} +ac_cv_env_build_alias_value=$build_alias +ac_env_host_alias_set=${host_alias+set} +ac_env_host_alias_value=$host_alias +ac_cv_env_host_alias_set=${host_alias+set} +ac_cv_env_host_alias_value=$host_alias +ac_env_target_alias_set=${target_alias+set} +ac_env_target_alias_value=$target_alias +ac_cv_env_target_alias_set=${target_alias+set} +ac_cv_env_target_alias_value=$target_alias +ac_env_CC_set=${CC+set} +ac_env_CC_value=$CC +ac_cv_env_CC_set=${CC+set} +ac_cv_env_CC_value=$CC +ac_env_CFLAGS_set=${CFLAGS+set} +ac_env_CFLAGS_value=$CFLAGS +ac_cv_env_CFLAGS_set=${CFLAGS+set} +ac_cv_env_CFLAGS_value=$CFLAGS +ac_env_LDFLAGS_set=${LDFLAGS+set} +ac_env_LDFLAGS_value=$LDFLAGS +ac_cv_env_LDFLAGS_set=${LDFLAGS+set} +ac_cv_env_LDFLAGS_value=$LDFLAGS +ac_env_CPPFLAGS_set=${CPPFLAGS+set} +ac_env_CPPFLAGS_value=$CPPFLAGS +ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} +ac_cv_env_CPPFLAGS_value=$CPPFLAGS +ac_env_CPP_set=${CPP+set} +ac_env_CPP_value=$CPP +ac_cv_env_CPP_set=${CPP+set} +ac_cv_env_CPP_value=$CPP + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures tkimgbmp 1.4.6 to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +_ACEOF + + cat <<_ACEOF +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --datadir=DIR read-only architecture-independent data [PREFIX/share] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --infodir=DIR info documentation [PREFIX/info] + --mandir=DIR man documentation [PREFIX/man] +_ACEOF + + cat <<\_ACEOF + +X features: + --x-includes=DIR X include files are in DIR + --x-libraries=DIR X library files are in DIR +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of tkimgbmp 1.4.6:";; + esac + cat <<\_ACEOF + +Optional Features: + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --enable-threads build with threads + --enable-shared build and link with shared libraries (default: on) + --enable-64bit enable 64bit support (default: off) + --enable-64bit-vis enable 64bit Sparc VIS support (default: off) + --disable-rpath disable rpath support (default: on) + --enable-wince enable Win/CE support (where applicable) + --enable-symbols build with debugging symbols (default: off) + +Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-tcl directory containing tcl configuration + (tclConfig.sh) + --with-tk directory containing tk configuration (tkConfig.sh) + --with-tkimg directory containing tkimg configuration (tkimgConfig.sh) + --with-tclinclude directory containing the public Tcl header files + --with-tkinclude directory containing the public Tk header files + --with-celib=DIR use Windows/CE support library from DIR + --with-x use the X Window System + +Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory + CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have + headers in a nonstandard directory + CPP C preprocessor + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +_ACEOF +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + ac_popdir=`pwd` + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d $ac_dir || continue + ac_builddir=. + +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi + +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac + +# Do not use `cd foo && pwd` to compute absolute paths, because +# the directories may not exist. +case `pwd` in +.) ac_abs_builddir="$ac_dir";; +*) + case "$ac_dir" in + .) ac_abs_builddir=`pwd`;; + [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; + *) ac_abs_builddir=`pwd`/"$ac_dir";; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_builddir=${ac_top_builddir}.;; +*) + case ${ac_top_builddir}. in + .) ac_abs_top_builddir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; + *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_srcdir=$ac_srcdir;; +*) + case $ac_srcdir in + .) ac_abs_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; + *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_srcdir=$ac_top_srcdir;; +*) + case $ac_top_srcdir in + .) ac_abs_top_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; + *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; + esac;; +esac + + cd $ac_dir + # Check for guested configure; otherwise get Cygnus style configure. + if test -f $ac_srcdir/configure.gnu; then + echo + $SHELL $ac_srcdir/configure.gnu --help=recursive + elif test -f $ac_srcdir/configure; then + echo + $SHELL $ac_srcdir/configure --help=recursive + elif test -f $ac_srcdir/configure.ac || + test -f $ac_srcdir/configure.in; then + echo + $ac_configure --help + else + echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi + cd $ac_popdir + done +fi + +test -n "$ac_init_help" && exit 0 +if $ac_init_version; then + cat <<\_ACEOF +tkimgbmp configure 1.4.6 +generated by GNU Autoconf 2.59 + +Copyright (C) 2003 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit 0 +fi +exec 5>config.log +cat >&5 <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by tkimgbmp $as_me 1.4.6, which was +generated by GNU Autoconf 2.59. Invocation command line was + + $ $0 $@ + +_ACEOF +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +hostinfo = `(hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + echo "PATH: $as_dir" +done + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_sep= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 2) + ac_configure_args1="$ac_configure_args1 '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" + # Get rid of the leading space. + ac_sep=" " + ;; + esac + done +done +$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } +$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Be sure not to use single quotes in there, as some shells, +# such as our DU 5.0 friend, will then `close' the trap. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + cat <<\_ASBOX +## ---------------- ## +## Cache variables. ## +## ---------------- ## +_ASBOX + echo + # The following way of writing the cache mishandles newlines in values, +{ + (set) 2>&1 | + case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in + *ac_space=\ *) + sed -n \ + "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" + ;; + *) + sed -n \ + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + ;; + esac; +} + echo + + cat <<\_ASBOX +## ----------------- ## +## Output variables. ## +## ----------------- ## +_ASBOX + echo + for ac_var in $ac_subst_vars + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + + if test -n "$ac_subst_files"; then + cat <<\_ASBOX +## ------------- ## +## Output files. ## +## ------------- ## +_ASBOX + echo + for ac_var in $ac_subst_files + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + fi + + if test -s confdefs.h; then + cat <<\_ASBOX +## ----------- ## +## confdefs.h. ## +## ----------- ## +_ASBOX + echo + sed "/^$/d" confdefs.h | sort + echo + fi + test "$ac_signal" != 0 && + echo "$as_me: caught signal $ac_signal" + echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core && + rm -rf conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status + ' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -rf conftest* confdefs.h +# AIX cpp loses on an empty file, so make sure it contains at least a newline. +echo >confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer explicitly selected file to automatically selected ones. +if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi +fi +for ac_site_file in $CONFIG_SITE; do + if test -r "$ac_site_file"; then + { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 +echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special + # files actually), so we avoid doing that. + if test -f "$cache_file"; then + { echo "$as_me:$LINENO: loading cache $cache_file" >&5 +echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . $cache_file;; + *) . ./$cache_file;; + esac + fi +else + { echo "$as_me:$LINENO: creating cache $cache_file" >&5 +echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in `(set) 2>&1 | + sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val="\$ac_cv_env_${ac_var}_value" + eval ac_new_val="\$ac_env_${ac_var}_value" + case $ac_old_set,$ac_new_set in + set,) + { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 +echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 +echo "$as_me: former value: $ac_old_val" >&2;} + { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 +echo "$as_me: current value: $ac_new_val" >&2;} + ac_cache_corrupted=: + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 +echo "$as_me: error: changes in the environment can compromise the build" >&2;} + { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 +echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} + { (exit 1); exit 1; }; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + # TEA extensions pass this us the version of TEA they think they + # are compatible with. + TEA_VERSION="3.9" + + echo "$as_me:$LINENO: checking for correct TEA configuration" >&5 +echo $ECHO_N "checking for correct TEA configuration... $ECHO_C" >&6 + if test x"${PACKAGE_NAME}" = x ; then + { { echo "$as_me:$LINENO: error: +The PACKAGE_NAME variable must be defined by your TEA configure.in" >&5 +echo "$as_me: error: +The PACKAGE_NAME variable must be defined by your TEA configure.in" >&2;} + { (exit 1); exit 1; }; } + fi + if test x"3.9" = x ; then + { { echo "$as_me:$LINENO: error: +TEA version not specified." >&5 +echo "$as_me: error: +TEA version not specified." >&2;} + { (exit 1); exit 1; }; } + elif test "3.9" != "${TEA_VERSION}" ; then + echo "$as_me:$LINENO: result: warning: requested TEA version \"3.9\", have \"${TEA_VERSION}\"" >&5 +echo "${ECHO_T}warning: requested TEA version \"3.9\", have \"${TEA_VERSION}\"" >&6 + else + echo "$as_me:$LINENO: result: ok (TEA ${TEA_VERSION})" >&5 +echo "${ECHO_T}ok (TEA ${TEA_VERSION})" >&6 + fi + + # If the user did not set CFLAGS, set it now to keep macros + # like AC_PROG_CC and AC_TRY_COMPILE from adding "-g -O2". + if test "${CFLAGS+set}" != "set" ; then + CFLAGS="" + fi + + case "`uname -s`" in + *win32*|*WIN32*|*MINGW32_*) + # Extract the first word of "cygpath", so it can be a program name with args. +set dummy cygpath; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CYGPATH+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CYGPATH"; then + ac_cv_prog_CYGPATH="$CYGPATH" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CYGPATH="cygpath -w" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_CYGPATH" && ac_cv_prog_CYGPATH="echo" +fi +fi +CYGPATH=$ac_cv_prog_CYGPATH +if test -n "$CYGPATH"; then + echo "$as_me:$LINENO: result: $CYGPATH" >&5 +echo "${ECHO_T}$CYGPATH" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + EXEEXT=".exe" + TEA_PLATFORM="windows" + ;; + *CYGWIN_*) + CYGPATH=echo + EXEEXT=".exe" + # TEA_PLATFORM is determined later in LOAD_TCLCONFIG + ;; + *) + CYGPATH=echo + # Maybe we are cross-compiling.... + case ${host_alias} in + *mingw32*) + EXEEXT=".exe" + TEA_PLATFORM="windows" + ;; + *) + EXEEXT="" + TEA_PLATFORM="unix" + ;; + esac + ;; + esac + + # Check if exec_prefix is set. If not use fall back to prefix. + # Note when adjusted, so that TEA_PREFIX can correct for this. + # This is needed for recursive configures, since autoconf propagates + # $prefix, but not $exec_prefix (doh!). + if test x$exec_prefix = xNONE ; then + exec_prefix_default=yes + exec_prefix=$prefix + fi + + { echo "$as_me:$LINENO: configuring ${PACKAGE_NAME} ${PACKAGE_VERSION}" >&5 +echo "$as_me: configuring ${PACKAGE_NAME} ${PACKAGE_VERSION}" >&6;} + + + + + # This package name must be replaced statically for AC_SUBST to work + + # Substitute STUB_LIB_FILE in case package creates a stub library too. + + + # We AC_SUBST these here to ensure they are subst'ed, + # in case the user doesn't call TEA_ADD_... + + + + + + + + + +ac_aux_dir= +for ac_dir in ../tclconfig $srcdir/../tclconfig; do + if test -f $ac_dir/install-sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f $ac_dir/install.sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f $ac_dir/shtool; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../tclconfig $srcdir/../tclconfig" >&5 +echo "$as_me: error: cannot find install-sh or install.sh in ../tclconfig $srcdir/../tclconfig" >&2;} + { (exit 1); exit 1; }; } +fi +ac_config_guess="$SHELL $ac_aux_dir/config.guess" +ac_config_sub="$SHELL $ac_aux_dir/config.sub" +ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. + + +PHIMGTYPE="bmp" +CPACKAGE="Tkimgbmp" +PACKAGE_TCLNAME="img::bmp" + + +#-------------------------------------------------------------------- +# Load the tclConfig.sh file +# Load the tkConfig.sh file +#-------------------------------------------------------------------- + + + + # + # Ok, lets find the tcl configuration + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-tcl + # + + if test x"${no_tcl}" = x ; then + # we reset no_tcl in case something fails here + no_tcl=true + +# Check whether --with-tcl or --without-tcl was given. +if test "${with_tcl+set}" = set; then + withval="$with_tcl" + with_tclconfig="${withval}" +fi; + echo "$as_me:$LINENO: checking for Tcl configuration" >&5 +echo $ECHO_N "checking for Tcl configuration... $ECHO_C" >&6 + if test "${ac_cv_c_tclconfig+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + + # First check to see if --with-tcl was specified. + if test x"${with_tclconfig}" != x ; then + case "${with_tclconfig}" in + */tclConfig.sh ) + if test -f "${with_tclconfig}"; then + { echo "$as_me:$LINENO: WARNING: --with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself" >&5 +echo "$as_me: WARNING: --with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself" >&2;} + with_tclconfig="`echo "${with_tclconfig}" | sed 's!/tclConfig\.sh$!!'`" + fi ;; + esac + if test -f "${with_tclconfig}/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd "${with_tclconfig}"; pwd)`" + else + { { echo "$as_me:$LINENO: error: ${with_tclconfig} directory doesn't contain tclConfig.sh" >&5 +echo "$as_me: error: ${with_tclconfig} directory doesn't contain tclConfig.sh" >&2;} + { (exit 1); exit 1; }; } + fi + fi + + # then check for a private Tcl installation + if test x"${ac_cv_c_tclconfig}" = x ; then + for i in \ + ../tcl \ + `ls -dr ../tcl[8-9].[0-9].[0-9]* 2>/dev/null` \ + `ls -dr ../tcl[8-9].[0-9] 2>/dev/null` \ + `ls -dr ../tcl[8-9].[0-9]* 2>/dev/null` \ + ../../tcl \ + `ls -dr ../../tcl[8-9].[0-9].[0-9]* 2>/dev/null` \ + `ls -dr ../../tcl[8-9].[0-9] 2>/dev/null` \ + `ls -dr ../../tcl[8-9].[0-9]* 2>/dev/null` \ + ../../../tcl \ + `ls -dr ../../../tcl[8-9].[0-9].[0-9]* 2>/dev/null` \ + `ls -dr ../../../tcl[8-9].[0-9] 2>/dev/null` \ + `ls -dr ../../../tcl[8-9].[0-9]* 2>/dev/null` ; do + if test "${TEA_PLATFORM}" = "windows" \ + -a -f "$i/win/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i/win; pwd)`" + break + fi + if test -f "$i/unix/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i/unix; pwd)`" + break + fi + done + fi + + # on Darwin, check in Framework installation locations + if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tclconfig}" = x ; then + for i in `ls -d ~/Library/Frameworks 2>/dev/null` \ + `ls -d /Library/Frameworks 2>/dev/null` \ + `ls -d /Network/Library/Frameworks 2>/dev/null` \ + `ls -d /System/Library/Frameworks 2>/dev/null` \ + ; do + if test -f "$i/Tcl.framework/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i/Tcl.framework; pwd)`" + break + fi + done + fi + + # TEA specific: on Windows, check in common installation locations + if test "${TEA_PLATFORM}" = "windows" \ + -a x"${ac_cv_c_tclconfig}" = x ; then + for i in `ls -d C:/Tcl/lib 2>/dev/null` \ + `ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \ + ; do + if test -f "$i/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i; pwd)`" + break + fi + done + fi + + # check in a few common install locations + if test x"${ac_cv_c_tclconfig}" = x ; then + for i in `ls -d ${libdir} 2>/dev/null` \ + `ls -d ${exec_prefix}/lib 2>/dev/null` \ + `ls -d ${prefix}/lib 2>/dev/null` \ + `ls -d /usr/local/lib 2>/dev/null` \ + `ls -d /usr/contrib/lib 2>/dev/null` \ + `ls -d /usr/lib 2>/dev/null` \ + `ls -d /usr/lib64 2>/dev/null` \ + `ls -d /usr/lib/tcl8.6 2>/dev/null` \ + `ls -d /usr/lib/tcl8.5 2>/dev/null` \ + ; do + if test -f "$i/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i; pwd)`" + break + fi + done + fi + + # check in a few other private locations + if test x"${ac_cv_c_tclconfig}" = x ; then + for i in \ + ${srcdir}/../tcl \ + `ls -dr ${srcdir}/../tcl[8-9].[0-9].[0-9]* 2>/dev/null` \ + `ls -dr ${srcdir}/../tcl[8-9].[0-9] 2>/dev/null` \ + `ls -dr ${srcdir}/../tcl[8-9].[0-9]* 2>/dev/null` ; do + if test "${TEA_PLATFORM}" = "windows" \ + -a -f "$i/win/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i/win; pwd)`" + break + fi + if test -f "$i/unix/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i/unix; pwd)`" + break + fi + done + fi + +fi + + + if test x"${ac_cv_c_tclconfig}" = x ; then + TCL_BIN_DIR="# no Tcl configs found" + { { echo "$as_me:$LINENO: error: Can't find Tcl configuration definitions. Use --with-tcl to specify a directory containing tclConfig.sh" >&5 +echo "$as_me: error: Can't find Tcl configuration definitions. Use --with-tcl to specify a directory containing tclConfig.sh" >&2;} + { (exit 1); exit 1; }; } + else + no_tcl= + TCL_BIN_DIR="${ac_cv_c_tclconfig}" + echo "$as_me:$LINENO: result: found ${TCL_BIN_DIR}/tclConfig.sh" >&5 +echo "${ECHO_T}found ${TCL_BIN_DIR}/tclConfig.sh" >&6 + fi + fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + CC=$ac_ct_CC +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + CC=$ac_ct_CC +else + CC="$ac_cv_prog_CC" +fi + +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$ac_ct_CC" && break +done + + CC=$ac_ct_CC +fi + +fi + + +test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&5 +echo "$as_me: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + +# Provide some information about the compiler. +echo "$as_me:$LINENO:" \ + "checking for C compiler version" >&5 +ac_compiler=`set X $ac_compile; echo $2` +{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 + (eval $ac_compiler --version &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 + (eval $ac_compiler -v &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 + (eval $ac_compiler -V &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 +echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6 +ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` +if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 + (eval $ac_link_default) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # Find the output, starting from the most likely. This scheme is +# not robust to junk in `.', hence go to wildcards (a.*) only as a last +# resort. + +# Be careful to initialize this variable, since it used to be cached. +# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. +ac_cv_exeext= +# b.out is created by i960 compilers. +for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) + ;; + conftest.$ac_ext ) + # This is the source file. + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + # FIXME: I believe we export ac_cv_exeext for Libtool, + # but it would be cool to find out if it's true. Does anybody + # maintain Libtool? --akim. + export ac_cv_exeext + break;; + * ) + break;; + esac +done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { echo "$as_me:$LINENO: error: C compiler cannot create executables +See \`config.log' for more details." >&5 +echo "$as_me: error: C compiler cannot create executables +See \`config.log' for more details." >&2;} + { (exit 77); exit 77; }; } +fi + +ac_exeext=$ac_cv_exeext +echo "$as_me:$LINENO: result: $ac_file" >&5 +echo "${ECHO_T}$ac_file" >&6 + +# Check the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +echo "$as_me:$LINENO: checking whether the C compiler works" >&5 +echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 +# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 +# If not cross compiling, check that we can run a simple program. +if test "$cross_compiling" != yes; then + if { ac_try='./$ac_file' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { echo "$as_me:$LINENO: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + fi + fi +fi +echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + +rm -f a.out a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +# Check the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 +echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 +echo "$as_me:$LINENO: result: $cross_compiling" >&5 +echo "${ECHO_T}$cross_compiling" >&6 + +echo "$as_me:$LINENO: checking for suffix of executables" >&5 +echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + export ac_cv_exeext + break;; + * ) break;; + esac +done +else + { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +rm -f conftest$ac_cv_exeext +echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 +echo "${ECHO_T}$ac_cv_exeext" >&6 + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +echo "$as_me:$LINENO: checking for suffix of object files" >&5 +echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 +if test "${ac_cv_objext+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 +echo "${ECHO_T}$ac_cv_objext" >&6 +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 +if test "${ac_cv_c_compiler_gnu+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_compiler_gnu=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_compiler_gnu=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 +GCC=`test $ac_compiler_gnu = yes && echo yes` +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +CFLAGS="-g" +echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_prog_cc_g=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_prog_cc_g=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 +echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_prog_cc_stdc=no +ac_save_CC=$CC +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#include +#include +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std1 is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std1. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +# Don't try gcc -ansi; that turns off useful extensions and +# breaks some systems' header files. +# AIX -qlanglvl=ansi +# Ultrix and OSF/1 -std1 +# HP-UX 10.20 and later -Ae +# HP-UX older versions -Aa -D_HPUX_SOURCE +# SVR4 -Xc -D__EXTENSIONS__ +for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_prog_cc_stdc=$ac_arg +break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext +done +rm -f conftest.$ac_ext conftest.$ac_objext +CC=$ac_save_CC + +fi + +case "x$ac_cv_prog_cc_stdc" in + x|xno) + echo "$as_me:$LINENO: result: none needed" >&5 +echo "${ECHO_T}none needed" >&6 ;; + *) + echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 + CC="$CC $ac_cv_prog_cc_stdc" ;; +esac + +# Some people use a C++ compiler to compile C. Since we use `exit', +# in C++ we need to declare it. In case someone uses the same compiler +# for both compiling C and C++ we need to have the C++ compiler decide +# the declaration of exit, since it's the most demanding environment. +cat >conftest.$ac_ext <<_ACEOF +#ifndef __cplusplus + choke me +#endif +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + for ac_declaration in \ + '' \ + 'extern "C" void std::exit (int) throw (); using std::exit;' \ + 'extern "C" void std::exit (int); using std::exit;' \ + 'extern "C" void exit (int) throw ();' \ + 'extern "C" void exit (int);' \ + 'void exit (int);' +do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_declaration +#include +int +main () +{ +exit (42); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +continue +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_declaration +int +main () +{ +exit (42); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +done +rm -f conftest* +if test -n "$ac_declaration"; then + echo '#ifdef __cplusplus' >>confdefs.h + echo $ac_declaration >>confdefs.h + echo '#endif' >>confdefs.h +fi + +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + echo "$as_me:$LINENO: checking for existence of ${TCL_BIN_DIR}/tclConfig.sh" >&5 +echo $ECHO_N "checking for existence of ${TCL_BIN_DIR}/tclConfig.sh... $ECHO_C" >&6 + + if test -f "${TCL_BIN_DIR}/tclConfig.sh" ; then + echo "$as_me:$LINENO: result: loading" >&5 +echo "${ECHO_T}loading" >&6 + . "${TCL_BIN_DIR}/tclConfig.sh" + else + echo "$as_me:$LINENO: result: could not find ${TCL_BIN_DIR}/tclConfig.sh" >&5 +echo "${ECHO_T}could not find ${TCL_BIN_DIR}/tclConfig.sh" >&6 + fi + + # eval is required to do the TCL_DBGX substitution + eval "TCL_LIB_FILE=\"${TCL_LIB_FILE}\"" + eval "TCL_STUB_LIB_FILE=\"${TCL_STUB_LIB_FILE}\"" + + # If the TCL_BIN_DIR is the build directory (not the install directory), + # then set the common variable name to the value of the build variables. + # For example, the variable TCL_LIB_SPEC will be set to the value + # of TCL_BUILD_LIB_SPEC. An extension should make use of TCL_LIB_SPEC + # instead of TCL_BUILD_LIB_SPEC since it will work with both an + # installed and uninstalled version of Tcl. + if test -f "${TCL_BIN_DIR}/Makefile" ; then + TCL_LIB_SPEC="${TCL_BUILD_LIB_SPEC}" + TCL_STUB_LIB_SPEC="${TCL_BUILD_STUB_LIB_SPEC}" + TCL_STUB_LIB_PATH="${TCL_BUILD_STUB_LIB_PATH}" + elif test "`uname -s`" = "Darwin"; then + # If Tcl was built as a framework, attempt to use the libraries + # from the framework at the given location so that linking works + # against Tcl.framework installed in an arbitrary location. + case ${TCL_DEFS} in + *TCL_FRAMEWORK*) + if test -f "${TCL_BIN_DIR}/${TCL_LIB_FILE}"; then + for i in "`cd "${TCL_BIN_DIR}"; pwd`" \ + "`cd "${TCL_BIN_DIR}"/../..; pwd`"; do + if test "`basename "$i"`" = "${TCL_LIB_FILE}.framework"; then + TCL_LIB_SPEC="-F`dirname "$i" | sed -e 's/ /\\\\ /g'` -framework ${TCL_LIB_FILE}" + break + fi + done + fi + if test -f "${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}"; then + TCL_STUB_LIB_SPEC="-L`echo "${TCL_BIN_DIR}" | sed -e 's/ /\\\\ /g'` ${TCL_STUB_LIB_FLAG}" + TCL_STUB_LIB_PATH="${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}" + fi + ;; + esac + fi + + # eval is required to do the TCL_DBGX substitution + eval "TCL_LIB_FLAG=\"${TCL_LIB_FLAG}\"" + eval "TCL_LIB_SPEC=\"${TCL_LIB_SPEC}\"" + eval "TCL_STUB_LIB_FLAG=\"${TCL_STUB_LIB_FLAG}\"" + eval "TCL_STUB_LIB_SPEC=\"${TCL_STUB_LIB_SPEC}\"" + + + + + + + + + + + + + + + echo "$as_me:$LINENO: checking platform" >&5 +echo $ECHO_N "checking platform... $ECHO_C" >&6 + hold_cc=$CC; CC="$TCL_CC" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + #ifdef _WIN32 + #error win32 + #endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + TEA_PLATFORM="unix" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +TEA_PLATFORM="windows" + +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + CC=$hold_cc + echo "$as_me:$LINENO: result: $TEA_PLATFORM" >&5 +echo "${ECHO_T}$TEA_PLATFORM" >&6 + + # The BUILD_$pkg is to define the correct extern storage class + # handling when making this package + +cat >>confdefs.h <<_ACEOF +#define BUILD_${PACKAGE_NAME} +_ACEOF + + # Do this here as we have fully defined TEA_PLATFORM now + if test "${TEA_PLATFORM}" = "windows" ; then + EXEEXT=".exe" + CLEANFILES="$CLEANFILES *.lib *.dll *.pdb *.exp" + fi + + # TEA specific: + + + + + + + + + + # + # Ok, lets find the tk configuration + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-tk + # + + if test x"${no_tk}" = x ; then + # we reset no_tk in case something fails here + no_tk=true + +# Check whether --with-tk or --without-tk was given. +if test "${with_tk+set}" = set; then + withval="$with_tk" + with_tkconfig="${withval}" +fi; + echo "$as_me:$LINENO: checking for Tk configuration" >&5 +echo $ECHO_N "checking for Tk configuration... $ECHO_C" >&6 + if test "${ac_cv_c_tkconfig+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + + # First check to see if --with-tkconfig was specified. + if test x"${with_tkconfig}" != x ; then + case "${with_tkconfig}" in + */tkConfig.sh ) + if test -f "${with_tkconfig}"; then + { echo "$as_me:$LINENO: WARNING: --with-tk argument should refer to directory containing tkConfig.sh, not to tkConfig.sh itself" >&5 +echo "$as_me: WARNING: --with-tk argument should refer to directory containing tkConfig.sh, not to tkConfig.sh itself" >&2;} + with_tkconfig="`echo "${with_tkconfig}" | sed 's!/tkConfig\.sh$!!'`" + fi ;; + esac + if test -f "${with_tkconfig}/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd "${with_tkconfig}"; pwd)`" + else + { { echo "$as_me:$LINENO: error: ${with_tkconfig} directory doesn't contain tkConfig.sh" >&5 +echo "$as_me: error: ${with_tkconfig} directory doesn't contain tkConfig.sh" >&2;} + { (exit 1); exit 1; }; } + fi + fi + + # then check for a private Tk library + if test x"${ac_cv_c_tkconfig}" = x ; then + for i in \ + ../tk \ + `ls -dr ../tk[8-9].[0-9].[0-9]* 2>/dev/null` \ + `ls -dr ../tk[8-9].[0-9] 2>/dev/null` \ + `ls -dr ../tk[8-9].[0-9]* 2>/dev/null` \ + ../../tk \ + `ls -dr ../../tk[8-9].[0-9].[0-9]* 2>/dev/null` \ + `ls -dr ../../tk[8-9].[0-9] 2>/dev/null` \ + `ls -dr ../../tk[8-9].[0-9]* 2>/dev/null` \ + ../../../tk \ + `ls -dr ../../../tk[8-9].[0-9].[0-9]* 2>/dev/null` \ + `ls -dr ../../../tk[8-9].[0-9] 2>/dev/null` \ + `ls -dr ../../../tk[8-9].[0-9]* 2>/dev/null` ; do + if test "${TEA_PLATFORM}" = "windows" \ + -a -f "$i/win/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i/win; pwd)`" + break + fi + if test -f "$i/unix/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i/unix; pwd)`" + break + fi + done + fi + + # on Darwin, check in Framework installation locations + if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tkconfig}" = x ; then + for i in `ls -d ~/Library/Frameworks 2>/dev/null` \ + `ls -d /Library/Frameworks 2>/dev/null` \ + `ls -d /Network/Library/Frameworks 2>/dev/null` \ + `ls -d /System/Library/Frameworks 2>/dev/null` \ + ; do + if test -f "$i/Tk.framework/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i/Tk.framework; pwd)`" + break + fi + done + fi + + # check in a few common install locations + if test x"${ac_cv_c_tkconfig}" = x ; then + for i in `ls -d ${libdir} 2>/dev/null` \ + `ls -d ${exec_prefix}/lib 2>/dev/null` \ + `ls -d ${prefix}/lib 2>/dev/null` \ + `ls -d /usr/local/lib 2>/dev/null` \ + `ls -d /usr/contrib/lib 2>/dev/null` \ + `ls -d /usr/lib 2>/dev/null` \ + `ls -d /usr/lib64 2>/dev/null` \ + ; do + if test -f "$i/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i; pwd)`" + break + fi + done + fi + + # TEA specific: on Windows, check in common installation locations + if test "${TEA_PLATFORM}" = "windows" \ + -a x"${ac_cv_c_tkconfig}" = x ; then + for i in `ls -d C:/Tcl/lib 2>/dev/null` \ + `ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \ + ; do + if test -f "$i/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i; pwd)`" + break + fi + done + fi + + # check in a few other private locations + if test x"${ac_cv_c_tkconfig}" = x ; then + for i in \ + ${srcdir}/../tk \ + `ls -dr ${srcdir}/../tk[8-9].[0-9].[0-9]* 2>/dev/null` \ + `ls -dr ${srcdir}/../tk[8-9].[0-9] 2>/dev/null` \ + `ls -dr ${srcdir}/../tk[8-9].[0-9]* 2>/dev/null` ; do + if test "${TEA_PLATFORM}" = "windows" \ + -a -f "$i/win/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i/win; pwd)`" + break + fi + if test -f "$i/unix/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i/unix; pwd)`" + break + fi + done + fi + +fi + + + if test x"${ac_cv_c_tkconfig}" = x ; then + TK_BIN_DIR="# no Tk configs found" + { { echo "$as_me:$LINENO: error: Can't find Tk configuration definitions. Use --with-tk to specify a directory containing tkConfig.sh" >&5 +echo "$as_me: error: Can't find Tk configuration definitions. Use --with-tk to specify a directory containing tkConfig.sh" >&2;} + { (exit 1); exit 1; }; } + else + no_tk= + TK_BIN_DIR="${ac_cv_c_tkconfig}" + echo "$as_me:$LINENO: result: found ${TK_BIN_DIR}/tkConfig.sh" >&5 +echo "${ECHO_T}found ${TK_BIN_DIR}/tkConfig.sh" >&6 + fi + fi + + + echo "$as_me:$LINENO: checking for existence of ${TK_BIN_DIR}/tkConfig.sh" >&5 +echo $ECHO_N "checking for existence of ${TK_BIN_DIR}/tkConfig.sh... $ECHO_C" >&6 + + if test -f "${TK_BIN_DIR}/tkConfig.sh" ; then + echo "$as_me:$LINENO: result: loading" >&5 +echo "${ECHO_T}loading" >&6 + . "${TK_BIN_DIR}/tkConfig.sh" + else + echo "$as_me:$LINENO: result: could not find ${TK_BIN_DIR}/tkConfig.sh" >&5 +echo "${ECHO_T}could not find ${TK_BIN_DIR}/tkConfig.sh" >&6 + fi + + # eval is required to do the TK_DBGX substitution + eval "TK_LIB_FILE=\"${TK_LIB_FILE}\"" + eval "TK_STUB_LIB_FILE=\"${TK_STUB_LIB_FILE}\"" + + # If the TK_BIN_DIR is the build directory (not the install directory), + # then set the common variable name to the value of the build variables. + # For example, the variable TK_LIB_SPEC will be set to the value + # of TK_BUILD_LIB_SPEC. An extension should make use of TK_LIB_SPEC + # instead of TK_BUILD_LIB_SPEC since it will work with both an + # installed and uninstalled version of Tcl. + if test -f "${TK_BIN_DIR}/Makefile" ; then + TK_LIB_SPEC="${TK_BUILD_LIB_SPEC}" + TK_STUB_LIB_SPEC="${TK_BUILD_STUB_LIB_SPEC}" + TK_STUB_LIB_PATH="${TK_BUILD_STUB_LIB_PATH}" + elif test "`uname -s`" = "Darwin"; then + # If Tk was built as a framework, attempt to use the libraries + # from the framework at the given location so that linking works + # against Tk.framework installed in an arbitrary location. + case ${TK_DEFS} in + *TK_FRAMEWORK*) + if test -f "${TK_BIN_DIR}/${TK_LIB_FILE}"; then + for i in "`cd "${TK_BIN_DIR}"; pwd`" \ + "`cd "${TK_BIN_DIR}"/../..; pwd`"; do + if test "`basename "$i"`" = "${TK_LIB_FILE}.framework"; then + TK_LIB_SPEC="-F`dirname "$i" | sed -e 's/ /\\\\ /g'` -framework ${TK_LIB_FILE}" + break + fi + done + fi + if test -f "${TK_BIN_DIR}/${TK_STUB_LIB_FILE}"; then + TK_STUB_LIB_SPEC="-L` echo "${TK_BIN_DIR}" | sed -e 's/ /\\\\ /g'` ${TK_STUB_LIB_FLAG}" + TK_STUB_LIB_PATH="${TK_BIN_DIR}/${TK_STUB_LIB_FILE}" + fi + ;; + esac + fi + + # eval is required to do the TK_DBGX substitution + eval "TK_LIB_FLAG=\"${TK_LIB_FLAG}\"" + eval "TK_LIB_SPEC=\"${TK_LIB_SPEC}\"" + eval "TK_STUB_LIB_FLAG=\"${TK_STUB_LIB_FLAG}\"" + eval "TK_STUB_LIB_SPEC=\"${TK_STUB_LIB_SPEC}\"" + + # TEA specific: Ensure windowingsystem is defined + if test "${TEA_PLATFORM}" = "unix" ; then + case ${TK_DEFS} in + *MAC_OSX_TK*) + +cat >>confdefs.h <<\_ACEOF +#define MAC_OSX_TK 1 +_ACEOF + + TEA_WINDOWINGSYSTEM="aqua" + ;; + *) + TEA_WINDOWINGSYSTEM="x11" + ;; + esac + elif test "${TEA_PLATFORM}" = "windows" ; then + TEA_WINDOWINGSYSTEM="win32" + fi + + + + + + + + + + + + + + # TEA specific: + + + + +#----------------------------------------------------------------------- +# Handle the --prefix=... option by defaulting to what Tcl gave. +# Must be called after TEA_LOAD_TCLCONFIG and before TEA_SETUP_COMPILER. +#----------------------------------------------------------------------- + + + if test "${prefix}" = "NONE"; then + prefix_default=yes + if test x"${TCL_PREFIX}" != x; then + { echo "$as_me:$LINENO: --prefix defaulting to TCL_PREFIX ${TCL_PREFIX}" >&5 +echo "$as_me: --prefix defaulting to TCL_PREFIX ${TCL_PREFIX}" >&6;} + prefix=${TCL_PREFIX} + else + { echo "$as_me:$LINENO: --prefix defaulting to /usr/local" >&5 +echo "$as_me: --prefix defaulting to /usr/local" >&6;} + prefix=/usr/local + fi + fi + if test "${exec_prefix}" = "NONE" -a x"${prefix_default}" = x"yes" \ + -o x"${exec_prefix_default}" = x"yes" ; then + if test x"${TCL_EXEC_PREFIX}" != x; then + { echo "$as_me:$LINENO: --exec-prefix defaulting to TCL_EXEC_PREFIX ${TCL_EXEC_PREFIX}" >&5 +echo "$as_me: --exec-prefix defaulting to TCL_EXEC_PREFIX ${TCL_EXEC_PREFIX}" >&6;} + exec_prefix=${TCL_EXEC_PREFIX} + else + { echo "$as_me:$LINENO: --exec-prefix defaulting to ${prefix}" >&5 +echo "$as_me: --exec-prefix defaulting to ${prefix}" >&6;} + exec_prefix=$prefix + fi + fi + + +#----------------------------------------------------------------------- +# Standard compiler checks. +# This sets up CC by using the CC env var, or looks for gcc otherwise. +# This also calls AC_PROG_CC, AC_PROG_INSTALL and a few others to create +# the basic setup necessary to compile executables. +#----------------------------------------------------------------------- + + + # Don't put any macros that use the compiler (e.g. AC_TRY_COMPILE) + # in this macro, they need to go into TEA_SETUP_COMPILER instead. + + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + CC=$ac_ct_CC +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + CC=$ac_ct_CC +else + CC="$ac_cv_prog_CC" +fi + +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$ac_ct_CC" && break +done + + CC=$ac_ct_CC +fi + +fi + + +test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&5 +echo "$as_me: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + +# Provide some information about the compiler. +echo "$as_me:$LINENO:" \ + "checking for C compiler version" >&5 +ac_compiler=`set X $ac_compile; echo $2` +{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 + (eval $ac_compiler --version &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 + (eval $ac_compiler -v &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 + (eval $ac_compiler -V &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + +echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 +if test "${ac_cv_c_compiler_gnu+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_compiler_gnu=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_compiler_gnu=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 +GCC=`test $ac_compiler_gnu = yes && echo yes` +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +CFLAGS="-g" +echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_prog_cc_g=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_prog_cc_g=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 +echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_prog_cc_stdc=no +ac_save_CC=$CC +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#include +#include +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std1 is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std1. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +# Don't try gcc -ansi; that turns off useful extensions and +# breaks some systems' header files. +# AIX -qlanglvl=ansi +# Ultrix and OSF/1 -std1 +# HP-UX 10.20 and later -Ae +# HP-UX older versions -Aa -D_HPUX_SOURCE +# SVR4 -Xc -D__EXTENSIONS__ +for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_prog_cc_stdc=$ac_arg +break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext +done +rm -f conftest.$ac_ext conftest.$ac_objext +CC=$ac_save_CC + +fi + +case "x$ac_cv_prog_cc_stdc" in + x|xno) + echo "$as_me:$LINENO: result: none needed" >&5 +echo "${ECHO_T}none needed" >&6 ;; + *) + echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 + CC="$CC $ac_cv_prog_cc_stdc" ;; +esac + +# Some people use a C++ compiler to compile C. Since we use `exit', +# in C++ we need to declare it. In case someone uses the same compiler +# for both compiling C and C++ we need to have the C++ compiler decide +# the declaration of exit, since it's the most demanding environment. +cat >conftest.$ac_ext <<_ACEOF +#ifndef __cplusplus + choke me +#endif +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + for ac_declaration in \ + '' \ + 'extern "C" void std::exit (int) throw (); using std::exit;' \ + 'extern "C" void std::exit (int); using std::exit;' \ + 'extern "C" void exit (int) throw ();' \ + 'extern "C" void exit (int);' \ + 'void exit (int);' +do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_declaration +#include +int +main () +{ +exit (42); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +continue +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_declaration +int +main () +{ +exit (42); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +done +rm -f conftest* +if test -n "$ac_declaration"; then + echo '#ifdef __cplusplus' >>confdefs.h + echo $ac_declaration >>confdefs.h + echo '#endif' >>confdefs.h +fi + +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 +echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if test "${ac_cv_prog_CPP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + break +fi + + done + ac_cv_prog_CPP=$CPP + +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +echo "$as_me:$LINENO: result: $CPP" >&5 +echo "${ECHO_T}$CPP" >&6 +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + : +else + { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&5 +echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + INSTALL='$(SHELL) $(srcdir)/tclconfig/install-sh -c' + INSTALL_DATA_DIR='${INSTALL} -d -m 755' + INSTALL_DATA='${INSTALL} -m 644' + INSTALL_PROGRAM='${INSTALL}' + INSTALL_SCRIPT='${INSTALL}' + INSTALL_LIBRARY='${INSTALL_DATA}' + + + + + + + + + #-------------------------------------------------------------------- + # Checks to see if the make program sets the $MAKE variable. + #-------------------------------------------------------------------- + + echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 +set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` +if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.make <<\_ACEOF +all: + @echo 'ac_maketemp="$(MAKE)"' +_ACEOF +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` +if test -n "$ac_maketemp"; then + eval ac_cv_prog_make_${ac_make}_set=yes +else + eval ac_cv_prog_make_${ac_make}_set=no +fi +rm -f conftest.make +fi +if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + SET_MAKE= +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 + SET_MAKE="MAKE=${MAKE-make}" +fi + + + #-------------------------------------------------------------------- + # Find ranlib + #-------------------------------------------------------------------- + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + echo "$as_me:$LINENO: result: $RANLIB" >&5 +echo "${ECHO_T}$RANLIB" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 +echo "${ECHO_T}$ac_ct_RANLIB" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + RANLIB=$ac_ct_RANLIB +else + RANLIB="$ac_cv_prog_RANLIB" +fi + + + #-------------------------------------------------------------------- + # Determines the correct binary file extension (.o, .obj, .exe etc.) + #-------------------------------------------------------------------- + + + + + +echo "$as_me:$LINENO: checking for egrep" >&5 +echo $ECHO_N "checking for egrep... $ECHO_C" >&6 +if test "${ac_cv_prog_egrep+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if echo a | (grep -E '(a|b)') >/dev/null 2>&1 + then ac_cv_prog_egrep='grep -E' + else ac_cv_prog_egrep='egrep' + fi +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 +echo "${ECHO_T}$ac_cv_prog_egrep" >&6 + EGREP=$ac_cv_prog_egrep + + +echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 +if test "${ac_cv_header_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#include +#include + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_header_stdc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_header_stdc=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then + : +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + exit(2); + exit (0); +} +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_header_stdc=no +fi +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi +fi +fi +echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +echo "${ECHO_T}$ac_cv_header_stdc" >&6 +if test $ac_cv_header_stdc = yes; then + +cat >>confdefs.h <<\_ACEOF +#define STDC_HEADERS 1 +_ACEOF + +fi + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. + + + + + + + + + +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default + +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_Header=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_Header=no" +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + + # Any macros that use the compiler (e.g. AC_TRY_COMPILE) have to go here. + + + #------------------------------------------------------------------------ + # If we're using GCC, see if the compiler understands -pipe. If so, use it. + # It makes compiling go faster. (This is only a performance feature.) + #------------------------------------------------------------------------ + + if test -z "$no_pipe" -a -n "$GCC"; then + echo "$as_me:$LINENO: checking if the compiler understands -pipe" >&5 +echo $ECHO_N "checking if the compiler understands -pipe... $ECHO_C" >&6 +if test "${tcl_cv_cc_pipe+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -pipe" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_cc_pipe=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_cc_pipe=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + CFLAGS=$hold_cflags +fi +echo "$as_me:$LINENO: result: $tcl_cv_cc_pipe" >&5 +echo "${ECHO_T}$tcl_cv_cc_pipe" >&6 + if test $tcl_cv_cc_pipe = yes; then + CFLAGS="$CFLAGS -pipe" + fi + fi + + #-------------------------------------------------------------------- + # Common compiler flag setup + #-------------------------------------------------------------------- + + echo "$as_me:$LINENO: checking whether byte ordering is bigendian" >&5 +echo $ECHO_N "checking whether byte ordering is bigendian... $ECHO_C" >&6 +if test "${ac_cv_c_bigendian+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + # See if sys/param.h defines the BYTE_ORDER macro. +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include + +int +main () +{ +#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN + bogus endian macros +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + # It does; now see whether it defined to BIG_ENDIAN or not. +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include + +int +main () +{ +#if BYTE_ORDER != BIG_ENDIAN + not big endian +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_c_bigendian=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_c_bigendian=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +# It does not; compile a test program. +if test "$cross_compiling" = yes; then + # try to guess the endianness by grepping values into an object file + ac_cv_c_bigendian=unknown + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +short ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 }; +short ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 }; +void _ascii () { char *s = (char *) ascii_mm; s = (char *) ascii_ii; } +short ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 }; +short ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 }; +void _ebcdic () { char *s = (char *) ebcdic_mm; s = (char *) ebcdic_ii; } +int +main () +{ + _ascii (); _ebcdic (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + if grep BIGenDianSyS conftest.$ac_objext >/dev/null ; then + ac_cv_c_bigendian=yes +fi +if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then + if test "$ac_cv_c_bigendian" = unknown; then + ac_cv_c_bigendian=no + else + # finding both strings is unlikely to happen, but who knows? + ac_cv_c_bigendian=unknown + fi +fi +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +int +main () +{ + /* Are we little or big endian? From Harbison&Steele. */ + union + { + long l; + char c[sizeof (long)]; + } u; + u.l = 1; + exit (u.c[sizeof (long) - 1] == 1); +} +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_c_bigendian=no +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_c_bigendian=yes +fi +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5 +echo "${ECHO_T}$ac_cv_c_bigendian" >&6 +case $ac_cv_c_bigendian in + yes) + +cat >>confdefs.h <<\_ACEOF +#define WORDS_BIGENDIAN 1 +_ACEOF + ;; + no) + ;; + *) + { { echo "$as_me:$LINENO: error: unknown endianness +presetting ac_cv_c_bigendian=no (or yes) will help" >&5 +echo "$as_me: error: unknown endianness +presetting ac_cv_c_bigendian=no (or yes) will help" >&2;} + { (exit 1); exit 1; }; } ;; +esac + + if test "${TEA_PLATFORM}" = "unix" ; then + + #-------------------------------------------------------------------- + # On a few very rare systems, all of the libm.a stuff is + # already in libc.a. Set compiler flags accordingly. + # Also, Linux requires the "ieee" library for math to work + # right (and it must appear before "-lm"). + #-------------------------------------------------------------------- + + echo "$as_me:$LINENO: checking for sin" >&5 +echo $ECHO_N "checking for sin... $ECHO_C" >&6 +if test "${ac_cv_func_sin+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define sin to an innocuous variant, in case declares sin. + For example, HP-UX 11i declares gettimeofday. */ +#define sin innocuous_sin + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char sin (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef sin + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char sin (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_sin) || defined (__stub___sin) +choke me +#else +char (*f) () = sin; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != sin; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_sin=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_sin=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_sin" >&5 +echo "${ECHO_T}$ac_cv_func_sin" >&6 +if test $ac_cv_func_sin = yes; then + MATH_LIBS="" +else + MATH_LIBS="-lm" +fi + + echo "$as_me:$LINENO: checking for main in -lieee" >&5 +echo $ECHO_N "checking for main in -lieee... $ECHO_C" >&6 +if test "${ac_cv_lib_ieee_main+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lieee $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + + +int +main () +{ +main (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_ieee_main=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_ieee_main=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_ieee_main" >&5 +echo "${ECHO_T}$ac_cv_lib_ieee_main" >&6 +if test $ac_cv_lib_ieee_main = yes; then + MATH_LIBS="-lieee $MATH_LIBS" +fi + + + #-------------------------------------------------------------------- + # Interactive UNIX requires -linet instead of -lsocket, plus it + # needs net/errno.h to define the socket-related error codes. + #-------------------------------------------------------------------- + + echo "$as_me:$LINENO: checking for main in -linet" >&5 +echo $ECHO_N "checking for main in -linet... $ECHO_C" >&6 +if test "${ac_cv_lib_inet_main+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-linet $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + + +int +main () +{ +main (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_inet_main=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_inet_main=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_inet_main" >&5 +echo "${ECHO_T}$ac_cv_lib_inet_main" >&6 +if test $ac_cv_lib_inet_main = yes; then + LIBS="$LIBS -linet" +fi + + if test "${ac_cv_header_net_errno_h+set}" = set; then + echo "$as_me:$LINENO: checking for net/errno.h" >&5 +echo $ECHO_N "checking for net/errno.h... $ECHO_C" >&6 +if test "${ac_cv_header_net_errno_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_net_errno_h" >&5 +echo "${ECHO_T}$ac_cv_header_net_errno_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking net/errno.h usability" >&5 +echo $ECHO_N "checking net/errno.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking net/errno.h presence" >&5 +echo $ECHO_N "checking net/errno.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: net/errno.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: net/errno.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: net/errno.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: net/errno.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: net/errno.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: net/errno.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: net/errno.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: net/errno.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: net/errno.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: net/errno.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: net/errno.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: net/errno.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: net/errno.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: net/errno.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: net/errno.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: net/errno.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ----------------------------------- ## +## Report this to the tkimgbmp lists. ## +## ----------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for net/errno.h" >&5 +echo $ECHO_N "checking for net/errno.h... $ECHO_C" >&6 +if test "${ac_cv_header_net_errno_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_net_errno_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_net_errno_h" >&5 +echo "${ECHO_T}$ac_cv_header_net_errno_h" >&6 + +fi +if test $ac_cv_header_net_errno_h = yes; then + + +cat >>confdefs.h <<\_ACEOF +#define HAVE_NET_ERRNO_H 1 +_ACEOF + +fi + + + + #-------------------------------------------------------------------- + # Check for the existence of the -lsocket and -lnsl libraries. + # The order here is important, so that they end up in the right + # order in the command line generated by make. Here are some + # special considerations: + # 1. Use "connect" and "accept" to check for -lsocket, and + # "gethostbyname" to check for -lnsl. + # 2. Use each function name only once: can't redo a check because + # autoconf caches the results of the last check and won't redo it. + # 3. Use -lnsl and -lsocket only if they supply procedures that + # aren't already present in the normal libraries. This is because + # IRIX 5.2 has libraries, but they aren't needed and they're + # bogus: they goof up name resolution if used. + # 4. On some SVR4 systems, can't use -lsocket without -lnsl too. + # To get around this problem, check for both libraries together + # if -lsocket doesn't work by itself. + #-------------------------------------------------------------------- + + tcl_checkBoth=0 + echo "$as_me:$LINENO: checking for connect" >&5 +echo $ECHO_N "checking for connect... $ECHO_C" >&6 +if test "${ac_cv_func_connect+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define connect to an innocuous variant, in case declares connect. + For example, HP-UX 11i declares gettimeofday. */ +#define connect innocuous_connect + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char connect (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef connect + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char connect (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_connect) || defined (__stub___connect) +choke me +#else +char (*f) () = connect; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != connect; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_connect=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_connect=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_connect" >&5 +echo "${ECHO_T}$ac_cv_func_connect" >&6 +if test $ac_cv_func_connect = yes; then + tcl_checkSocket=0 +else + tcl_checkSocket=1 +fi + + if test "$tcl_checkSocket" = 1; then + echo "$as_me:$LINENO: checking for setsockopt" >&5 +echo $ECHO_N "checking for setsockopt... $ECHO_C" >&6 +if test "${ac_cv_func_setsockopt+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define setsockopt to an innocuous variant, in case declares setsockopt. + For example, HP-UX 11i declares gettimeofday. */ +#define setsockopt innocuous_setsockopt + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char setsockopt (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef setsockopt + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char setsockopt (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_setsockopt) || defined (__stub___setsockopt) +choke me +#else +char (*f) () = setsockopt; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != setsockopt; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_setsockopt=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_setsockopt=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_setsockopt" >&5 +echo "${ECHO_T}$ac_cv_func_setsockopt" >&6 +if test $ac_cv_func_setsockopt = yes; then + : +else + echo "$as_me:$LINENO: checking for setsockopt in -lsocket" >&5 +echo $ECHO_N "checking for setsockopt in -lsocket... $ECHO_C" >&6 +if test "${ac_cv_lib_socket_setsockopt+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lsocket $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char setsockopt (); +int +main () +{ +setsockopt (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_socket_setsockopt=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_socket_setsockopt=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_socket_setsockopt" >&5 +echo "${ECHO_T}$ac_cv_lib_socket_setsockopt" >&6 +if test $ac_cv_lib_socket_setsockopt = yes; then + LIBS="$LIBS -lsocket" +else + tcl_checkBoth=1 +fi + +fi + + fi + if test "$tcl_checkBoth" = 1; then + tk_oldLibs=$LIBS + LIBS="$LIBS -lsocket -lnsl" + echo "$as_me:$LINENO: checking for accept" >&5 +echo $ECHO_N "checking for accept... $ECHO_C" >&6 +if test "${ac_cv_func_accept+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define accept to an innocuous variant, in case declares accept. + For example, HP-UX 11i declares gettimeofday. */ +#define accept innocuous_accept + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char accept (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef accept + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char accept (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_accept) || defined (__stub___accept) +choke me +#else +char (*f) () = accept; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != accept; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_accept=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_accept=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_accept" >&5 +echo "${ECHO_T}$ac_cv_func_accept" >&6 +if test $ac_cv_func_accept = yes; then + tcl_checkNsl=0 +else + LIBS=$tk_oldLibs +fi + + fi + echo "$as_me:$LINENO: checking for gethostbyname" >&5 +echo $ECHO_N "checking for gethostbyname... $ECHO_C" >&6 +if test "${ac_cv_func_gethostbyname+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define gethostbyname to an innocuous variant, in case declares gethostbyname. + For example, HP-UX 11i declares gettimeofday. */ +#define gethostbyname innocuous_gethostbyname + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char gethostbyname (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef gethostbyname + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char gethostbyname (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_gethostbyname) || defined (__stub___gethostbyname) +choke me +#else +char (*f) () = gethostbyname; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != gethostbyname; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_gethostbyname=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_gethostbyname=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5 +echo "${ECHO_T}$ac_cv_func_gethostbyname" >&6 +if test $ac_cv_func_gethostbyname = yes; then + : +else + echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5 +echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6 +if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lnsl $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char gethostbyname (); +int +main () +{ +gethostbyname (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_nsl_gethostbyname=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_nsl_gethostbyname=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5 +echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6 +if test $ac_cv_lib_nsl_gethostbyname = yes; then + LIBS="$LIBS -lnsl" +fi + +fi + + + # TEA specific: Don't perform the eval of the libraries here because + # DL_LIBS won't be set until we call TEA_CONFIG_CFLAGS + + TCL_LIBS='${DL_LIBS} ${LIBS} ${MATH_LIBS}' + + + + + echo "$as_me:$LINENO: checking dirent.h" >&5 +echo $ECHO_N "checking dirent.h... $ECHO_C" >&6 +if test "${tcl_cv_dirent_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +int +main () +{ + +#ifndef _POSIX_SOURCE +# ifdef __Lynx__ + /* + * Generate compilation error to make the test fail: Lynx headers + * are only valid if really in the POSIX environment. + */ + + missing_procedure(); +# endif +#endif +DIR *d; +struct dirent *entryPtr; +char *p; +d = opendir("foobar"); +entryPtr = readdir(d); +p = entryPtr->d_name; +closedir(d); + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_dirent_h=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_dirent_h=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $tcl_cv_dirent_h" >&5 +echo "${ECHO_T}$tcl_cv_dirent_h" >&6 + + if test $tcl_cv_dirent_h = no; then + +cat >>confdefs.h <<\_ACEOF +#define NO_DIRENT_H 1 +_ACEOF + + fi + + # TEA specific: + if test "${ac_cv_header_errno_h+set}" = set; then + echo "$as_me:$LINENO: checking for errno.h" >&5 +echo $ECHO_N "checking for errno.h... $ECHO_C" >&6 +if test "${ac_cv_header_errno_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_errno_h" >&5 +echo "${ECHO_T}$ac_cv_header_errno_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking errno.h usability" >&5 +echo $ECHO_N "checking errno.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking errno.h presence" >&5 +echo $ECHO_N "checking errno.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: errno.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: errno.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: errno.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: errno.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: errno.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: errno.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: errno.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: errno.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: errno.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: errno.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: errno.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: errno.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: errno.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: errno.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: errno.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: errno.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ----------------------------------- ## +## Report this to the tkimgbmp lists. ## +## ----------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for errno.h" >&5 +echo $ECHO_N "checking for errno.h... $ECHO_C" >&6 +if test "${ac_cv_header_errno_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_errno_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_errno_h" >&5 +echo "${ECHO_T}$ac_cv_header_errno_h" >&6 + +fi +if test $ac_cv_header_errno_h = yes; then + : +else + +cat >>confdefs.h <<\_ACEOF +#define NO_ERRNO_H 1 +_ACEOF + +fi + + + if test "${ac_cv_header_float_h+set}" = set; then + echo "$as_me:$LINENO: checking for float.h" >&5 +echo $ECHO_N "checking for float.h... $ECHO_C" >&6 +if test "${ac_cv_header_float_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_float_h" >&5 +echo "${ECHO_T}$ac_cv_header_float_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking float.h usability" >&5 +echo $ECHO_N "checking float.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking float.h presence" >&5 +echo $ECHO_N "checking float.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: float.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: float.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: float.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: float.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: float.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: float.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: float.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: float.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: float.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: float.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: float.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: float.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: float.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: float.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: float.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: float.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ----------------------------------- ## +## Report this to the tkimgbmp lists. ## +## ----------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for float.h" >&5 +echo $ECHO_N "checking for float.h... $ECHO_C" >&6 +if test "${ac_cv_header_float_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_float_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_float_h" >&5 +echo "${ECHO_T}$ac_cv_header_float_h" >&6 + +fi +if test $ac_cv_header_float_h = yes; then + : +else + +cat >>confdefs.h <<\_ACEOF +#define NO_FLOAT_H 1 +_ACEOF + +fi + + + if test "${ac_cv_header_values_h+set}" = set; then + echo "$as_me:$LINENO: checking for values.h" >&5 +echo $ECHO_N "checking for values.h... $ECHO_C" >&6 +if test "${ac_cv_header_values_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_values_h" >&5 +echo "${ECHO_T}$ac_cv_header_values_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking values.h usability" >&5 +echo $ECHO_N "checking values.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking values.h presence" >&5 +echo $ECHO_N "checking values.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: values.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: values.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: values.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: values.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: values.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: values.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: values.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: values.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: values.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: values.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: values.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: values.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: values.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: values.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: values.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: values.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ----------------------------------- ## +## Report this to the tkimgbmp lists. ## +## ----------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for values.h" >&5 +echo $ECHO_N "checking for values.h... $ECHO_C" >&6 +if test "${ac_cv_header_values_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_values_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_values_h" >&5 +echo "${ECHO_T}$ac_cv_header_values_h" >&6 + +fi +if test $ac_cv_header_values_h = yes; then + : +else + +cat >>confdefs.h <<\_ACEOF +#define NO_VALUES_H 1 +_ACEOF + +fi + + + if test "${ac_cv_header_limits_h+set}" = set; then + echo "$as_me:$LINENO: checking for limits.h" >&5 +echo $ECHO_N "checking for limits.h... $ECHO_C" >&6 +if test "${ac_cv_header_limits_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_limits_h" >&5 +echo "${ECHO_T}$ac_cv_header_limits_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking limits.h usability" >&5 +echo $ECHO_N "checking limits.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking limits.h presence" >&5 +echo $ECHO_N "checking limits.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: limits.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: limits.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: limits.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: limits.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: limits.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: limits.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: limits.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: limits.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: limits.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: limits.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: limits.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: limits.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: limits.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: limits.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: limits.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: limits.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ----------------------------------- ## +## Report this to the tkimgbmp lists. ## +## ----------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for limits.h" >&5 +echo $ECHO_N "checking for limits.h... $ECHO_C" >&6 +if test "${ac_cv_header_limits_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_limits_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_limits_h" >&5 +echo "${ECHO_T}$ac_cv_header_limits_h" >&6 + +fi +if test $ac_cv_header_limits_h = yes; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_LIMITS_H 1 +_ACEOF + +else + +cat >>confdefs.h <<\_ACEOF +#define NO_LIMITS_H 1 +_ACEOF + +fi + + + if test "${ac_cv_header_stdlib_h+set}" = set; then + echo "$as_me:$LINENO: checking for stdlib.h" >&5 +echo $ECHO_N "checking for stdlib.h... $ECHO_C" >&6 +if test "${ac_cv_header_stdlib_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_stdlib_h" >&5 +echo "${ECHO_T}$ac_cv_header_stdlib_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking stdlib.h usability" >&5 +echo $ECHO_N "checking stdlib.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking stdlib.h presence" >&5 +echo $ECHO_N "checking stdlib.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: stdlib.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: stdlib.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: stdlib.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: stdlib.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: stdlib.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: stdlib.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: stdlib.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: stdlib.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: stdlib.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: stdlib.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: stdlib.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: stdlib.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: stdlib.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: stdlib.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: stdlib.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: stdlib.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ----------------------------------- ## +## Report this to the tkimgbmp lists. ## +## ----------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for stdlib.h" >&5 +echo $ECHO_N "checking for stdlib.h... $ECHO_C" >&6 +if test "${ac_cv_header_stdlib_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_stdlib_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_stdlib_h" >&5 +echo "${ECHO_T}$ac_cv_header_stdlib_h" >&6 + +fi +if test $ac_cv_header_stdlib_h = yes; then + tcl_ok=1 +else + tcl_ok=0 +fi + + + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "strtol" >/dev/null 2>&1; then + : +else + tcl_ok=0 +fi +rm -f conftest* + + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "strtoul" >/dev/null 2>&1; then + : +else + tcl_ok=0 +fi +rm -f conftest* + + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "strtod" >/dev/null 2>&1; then + : +else + tcl_ok=0 +fi +rm -f conftest* + + if test $tcl_ok = 0; then + +cat >>confdefs.h <<\_ACEOF +#define NO_STDLIB_H 1 +_ACEOF + + fi + if test "${ac_cv_header_string_h+set}" = set; then + echo "$as_me:$LINENO: checking for string.h" >&5 +echo $ECHO_N "checking for string.h... $ECHO_C" >&6 +if test "${ac_cv_header_string_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_string_h" >&5 +echo "${ECHO_T}$ac_cv_header_string_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking string.h usability" >&5 +echo $ECHO_N "checking string.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking string.h presence" >&5 +echo $ECHO_N "checking string.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: string.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: string.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: string.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: string.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: string.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: string.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: string.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: string.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: string.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: string.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: string.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: string.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: string.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: string.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: string.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: string.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ----------------------------------- ## +## Report this to the tkimgbmp lists. ## +## ----------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for string.h" >&5 +echo $ECHO_N "checking for string.h... $ECHO_C" >&6 +if test "${ac_cv_header_string_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_string_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_string_h" >&5 +echo "${ECHO_T}$ac_cv_header_string_h" >&6 + +fi +if test $ac_cv_header_string_h = yes; then + tcl_ok=1 +else + tcl_ok=0 +fi + + + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "strstr" >/dev/null 2>&1; then + : +else + tcl_ok=0 +fi +rm -f conftest* + + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "strerror" >/dev/null 2>&1; then + : +else + tcl_ok=0 +fi +rm -f conftest* + + + # See also memmove check below for a place where NO_STRING_H can be + # set and why. + + if test $tcl_ok = 0; then + +cat >>confdefs.h <<\_ACEOF +#define NO_STRING_H 1 +_ACEOF + + fi + + if test "${ac_cv_header_sys_wait_h+set}" = set; then + echo "$as_me:$LINENO: checking for sys/wait.h" >&5 +echo $ECHO_N "checking for sys/wait.h... $ECHO_C" >&6 +if test "${ac_cv_header_sys_wait_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_sys_wait_h" >&5 +echo "${ECHO_T}$ac_cv_header_sys_wait_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking sys/wait.h usability" >&5 +echo $ECHO_N "checking sys/wait.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking sys/wait.h presence" >&5 +echo $ECHO_N "checking sys/wait.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: sys/wait.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: sys/wait.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/wait.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: sys/wait.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: sys/wait.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: sys/wait.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/wait.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: sys/wait.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/wait.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: sys/wait.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/wait.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: sys/wait.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/wait.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: sys/wait.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/wait.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: sys/wait.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ----------------------------------- ## +## Report this to the tkimgbmp lists. ## +## ----------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for sys/wait.h" >&5 +echo $ECHO_N "checking for sys/wait.h... $ECHO_C" >&6 +if test "${ac_cv_header_sys_wait_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_sys_wait_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_sys_wait_h" >&5 +echo "${ECHO_T}$ac_cv_header_sys_wait_h" >&6 + +fi +if test $ac_cv_header_sys_wait_h = yes; then + : +else + +cat >>confdefs.h <<\_ACEOF +#define NO_SYS_WAIT_H 1 +_ACEOF + +fi + + + if test "${ac_cv_header_dlfcn_h+set}" = set; then + echo "$as_me:$LINENO: checking for dlfcn.h" >&5 +echo $ECHO_N "checking for dlfcn.h... $ECHO_C" >&6 +if test "${ac_cv_header_dlfcn_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_dlfcn_h" >&5 +echo "${ECHO_T}$ac_cv_header_dlfcn_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking dlfcn.h usability" >&5 +echo $ECHO_N "checking dlfcn.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking dlfcn.h presence" >&5 +echo $ECHO_N "checking dlfcn.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: dlfcn.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: dlfcn.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: dlfcn.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: dlfcn.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: dlfcn.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: dlfcn.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: dlfcn.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: dlfcn.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: dlfcn.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: dlfcn.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: dlfcn.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: dlfcn.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: dlfcn.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: dlfcn.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: dlfcn.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: dlfcn.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ----------------------------------- ## +## Report this to the tkimgbmp lists. ## +## ----------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for dlfcn.h" >&5 +echo $ECHO_N "checking for dlfcn.h... $ECHO_C" >&6 +if test "${ac_cv_header_dlfcn_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_dlfcn_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_dlfcn_h" >&5 +echo "${ECHO_T}$ac_cv_header_dlfcn_h" >&6 + +fi +if test $ac_cv_header_dlfcn_h = yes; then + : +else + +cat >>confdefs.h <<\_ACEOF +#define NO_DLFCN_H 1 +_ACEOF + +fi + + + + # OS/390 lacks sys/param.h (and doesn't need it, by chance). + +for ac_header in sys/param.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <$ac_header> +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ----------------------------------- ## +## Report this to the tkimgbmp lists. ## +## ----------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + eval "$as_ac_Header=\$ac_header_preproc" +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 + +fi +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + # Let the user call this, because if it triggers, they will + # need a compat/strtod.c that is correct. Users can also + # use Tcl_GetDouble(FromObj) instead. + #TEA_BUGGY_STRTOD + fi + + + + # + # Ok, lets find the tkimg configuration + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-tkimg + # + + if test x"${no_tkimg}" = x ; then + # we reset no_tkimg in case something fails here + no_tkimg=true + +# Check whether --with-tkimg or --without-tkimg was given. +if test "${with_tkimg+set}" = set; then + withval="$with_tkimg" + with_tkimgconfig=${withval} +fi; + echo "$as_me:$LINENO: checking for tkimg configuration" >&5 +echo $ECHO_N "checking for tkimg configuration... $ECHO_C" >&6 + if test "${ac_cv_c_tkimgconfig+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + + # First check to see if --with-tkimg was specified. + if test x"${with_tkimgconfig}" != x ; then + case ${with_tkimgconfig} in + */tkimgConfig.sh ) + if test -f ${with_tkimgconfig}; then + { echo "$as_me:$LINENO: WARNING: --with-tkimg argument should refer to directory containing tkimgConfig.sh, not to tkimgConfig.sh itself" >&5 +echo "$as_me: WARNING: --with-tkimg argument should refer to directory containing tkimgConfig.sh, not to tkimgConfig.sh itself" >&2;} + with_tkimgconfig=`echo ${with_tkimgconfig} | sed 's!/tkimgConfig\.sh$!!'` + fi;; + esac + if test -f "${with_tkimgconfig}/tkimgConfig.sh" ; then + ac_cv_c_tkimgconfig=`(cd ${with_tkimgconfig}; pwd)` + else + { { echo "$as_me:$LINENO: error: ${with_tkimgconfig} directory doesn't contain tkimgConfig.sh" >&5 +echo "$as_me: error: ${with_tkimgconfig} directory doesn't contain tkimgConfig.sh" >&2;} + { (exit 1); exit 1; }; } + fi + fi + + # then check for a private tkimg installation + if test x"${ac_cv_c_tkimgconfig}" = x ; then + for i in \ + ../tkimg \ + `ls -dr ../tkimg*[0-9].[0-9]*.[0-9]* 2>/dev/null` \ + `ls -dr ../tkimg*[0-9].[0-9][0-9] 2>/dev/null` \ + `ls -dr ../tkimg*[0-9].[0-9] 2>/dev/null` \ + `ls -dr ../tkimg*[0-9].[0-9]* 2>/dev/null` \ + ../../tkimg \ + `ls -dr ../../tkimg*[0-9].[0-9]*.[0-9]* 2>/dev/null` \ + `ls -dr ../../tkimg*[0-9].[0-9][0-9] 2>/dev/null` \ + `ls -dr ../../tkimg*[0-9].[0-9] 2>/dev/null` \ + `ls -dr ../../tkimg*[0-9].[0-9]* 2>/dev/null` \ + ../../../tkimg \ + `ls -dr ../../../tkimg*[0-9].[0-9]*.[0-9]* 2>/dev/null` \ + `ls -dr ../../../tkimg*[0-9].[0-9][0-9] 2>/dev/null` \ + `ls -dr ../../../tkimg*[0-9].[0-9] 2>/dev/null` \ + `ls -dr ../../../tkimg*[0-9].[0-9]* 2>/dev/null` \ + ${srcdir}/../tkimg \ + `ls -dr ${srcdir}/../tkimg*[0-9].[0-9]*.[0-9]* 2>/dev/null` \ + `ls -dr ${srcdir}/../tkimg*[0-9].[0-9][0-9] 2>/dev/null` \ + `ls -dr ${srcdir}/../tkimg*[0-9].[0-9] 2>/dev/null` \ + `ls -dr ${srcdir}/../tkimg*[0-9].[0-9]* 2>/dev/null` \ + ; do + if test -f "$i/tkimgConfig.sh" ; then + ac_cv_c_tkimgconfig=`(cd $i; pwd)` + break + fi + if test -f "$i/unix/tkimgConfig.sh" ; then + ac_cv_c_tkimgconfig=`(cd $i/unix; pwd)` + break + fi + done + fi + + # check in a few common install locations + if test x"${ac_cv_c_tkimgconfig}" = x ; then + for i in `ls -d ${libdir} 2>/dev/null` \ + `ls -d ${exec_prefix}/lib 2>/dev/null` \ + `ls -d ${prefix}/lib 2>/dev/null` \ + `ls -d /usr/local/lib 2>/dev/null` \ + `ls -d /usr/contrib/lib 2>/dev/null` \ + `ls -d /usr/lib 2>/dev/null` \ + `ls -d /usr/lib64 2>/dev/null` \ + ; do + if test -f "$i/tkimgConfig.sh" ; then + ac_cv_c_tkimgconfig=`(cd $i; pwd)` + break + fi + done + fi + +fi + + + if test x"${ac_cv_c_tkimgconfig}" = x ; then + tkimg_BIN_DIR="# no tkimg configs found" + { echo "$as_me:$LINENO: WARNING: Cannot find tkimg configuration definitions" >&5 +echo "$as_me: WARNING: Cannot find tkimg configuration definitions" >&2;} + exit 0 + else + no_tkimg= + tkimg_BIN_DIR=${ac_cv_c_tkimgconfig} + echo "$as_me:$LINENO: result: found $tkimg_BIN_DIR/tkimgConfig.sh" >&5 +echo "${ECHO_T}found $tkimg_BIN_DIR/tkimgConfig.sh" >&6 + fi + fi + + + echo "$as_me:$LINENO: checking for existence of ${tkimg_BIN_DIR}/tkimgConfig.sh" >&5 +echo $ECHO_N "checking for existence of ${tkimg_BIN_DIR}/tkimgConfig.sh... $ECHO_C" >&6 + + if test -f "${tkimg_BIN_DIR}/tkimgConfig.sh" ; then + echo "$as_me:$LINENO: result: loading" >&5 +echo "${ECHO_T}loading" >&6 + . "${tkimg_BIN_DIR}/tkimgConfig.sh" + else + echo "$as_me:$LINENO: result: file not found" >&5 +echo "${ECHO_T}file not found" >&6 + fi + + # + # If the tkimg_BIN_DIR is the build directory (not the install directory), + # then set the common variable name to the value of the build variables. + # For example, the variable tkimg_LIB_SPEC will be set to the value + # of tkimg_BUILD_LIB_SPEC. An extension should make use of tkimg_LIB_SPEC + # instead of tkimg_BUILD_LIB_SPEC since it will work with both an + # installed and uninstalled version of Tcl. + # + + if test -f "${tkimg_BIN_DIR}/Makefile" ; then + { echo "$as_me:$LINENO: WARNING: Found Makefile - using build library specs for tkimg" >&5 +echo "$as_me: WARNING: Found Makefile - using build library specs for tkimg" >&2;} + tkimg_LIB_SPEC=${tkimg_BUILD_LIB_SPEC} + tkimg_STUB_LIB_SPEC=${tkimg_BUILD_STUB_LIB_SPEC} + tkimg_STUB_LIB_PATH=${tkimg_BUILD_STUB_LIB_PATH} + tkimg_INCLUDE_SPEC=${tkimg_BUILD_INCLUDE_SPEC} + tkimg_LIBRARY_PATH=${tkimg_LIBRARY_PATH} + fi + + + + + + + + + + + + + # Allow the caller to prevent this auto-check by specifying any 2nd arg + if test "x" = x; then + + # Check both upper and lower-case variants + # If a dev wanted non-stubs libs, this function could take an option + # to not use _STUB in the paths below + if test "x${tkimg_STUB_LIB_SPEC}" = x; then + + echo "$as_me:$LINENO: checking For TKIMG_STUB library for LIBS" >&5 +echo $ECHO_N "checking For TKIMG_STUB library for LIBS... $ECHO_C" >&6 + # This simplifies the use of stub libraries by automatically adding + # the stub lib to your path. Normally this would add to SHLIB_LD_LIBS, + # but this is called before CONFIG_CFLAGS. More importantly, this adds + # to PKG_LIBS, which becomes LIBS, and that is only used by SHLIB_LD. + if test "x${TKIMG_STUB_LIB_SPEC}" != "x" ; then + if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes" ; then + + vars="\"`${CYGPATH} ${TKIMG_STUB_LIB_PATH}`\"" + for i in $vars; do + if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then + # Convert foo.lib to -lfoo for GCC. No-op if not *.lib + i=`echo "$i" | sed -e 's/^\([^-].*\)\.lib$/-l\1/i'` + fi + PKG_LIBS="$PKG_LIBS $i" + done + + + echo "$as_me:$LINENO: result: using TKIMG_STUB_LIB_PATH ${TKIMG_STUB_LIB_PATH}" >&5 +echo "${ECHO_T}using TKIMG_STUB_LIB_PATH ${TKIMG_STUB_LIB_PATH}" >&6 + else + + vars="${TKIMG_STUB_LIB_SPEC}" + for i in $vars; do + if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then + # Convert foo.lib to -lfoo for GCC. No-op if not *.lib + i=`echo "$i" | sed -e 's/^\([^-].*\)\.lib$/-l\1/i'` + fi + PKG_LIBS="$PKG_LIBS $i" + done + + + echo "$as_me:$LINENO: result: using TKIMG_STUB_LIB_SPEC ${TKIMG_STUB_LIB_SPEC}" >&5 +echo "${ECHO_T}using TKIMG_STUB_LIB_SPEC ${TKIMG_STUB_LIB_SPEC}" >&6 + fi + else + echo "$as_me:$LINENO: result: file not found" >&5 +echo "${ECHO_T}file not found" >&6 + fi + +else + + echo "$as_me:$LINENO: checking For tkimg_STUB library for LIBS" >&5 +echo $ECHO_N "checking For tkimg_STUB library for LIBS... $ECHO_C" >&6 + # This simplifies the use of stub libraries by automatically adding + # the stub lib to your path. Normally this would add to SHLIB_LD_LIBS, + # but this is called before CONFIG_CFLAGS. More importantly, this adds + # to PKG_LIBS, which becomes LIBS, and that is only used by SHLIB_LD. + if test "x${tkimg_STUB_LIB_SPEC}" != "x" ; then + if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes" ; then + + vars="\"`${CYGPATH} ${tkimg_STUB_LIB_PATH}`\"" + for i in $vars; do + if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then + # Convert foo.lib to -lfoo for GCC. No-op if not *.lib + i=`echo "$i" | sed -e 's/^\([^-].*\)\.lib$/-l\1/i'` + fi + PKG_LIBS="$PKG_LIBS $i" + done + + + echo "$as_me:$LINENO: result: using tkimg_STUB_LIB_PATH ${tkimg_STUB_LIB_PATH}" >&5 +echo "${ECHO_T}using tkimg_STUB_LIB_PATH ${tkimg_STUB_LIB_PATH}" >&6 + else + + vars="${tkimg_STUB_LIB_SPEC}" + for i in $vars; do + if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then + # Convert foo.lib to -lfoo for GCC. No-op if not *.lib + i=`echo "$i" | sed -e 's/^\([^-].*\)\.lib$/-l\1/i'` + fi + PKG_LIBS="$PKG_LIBS $i" + done + + + echo "$as_me:$LINENO: result: using tkimg_STUB_LIB_SPEC ${tkimg_STUB_LIB_SPEC}" >&5 +echo "${ECHO_T}using tkimg_STUB_LIB_SPEC ${tkimg_STUB_LIB_SPEC}" >&6 + fi + else + echo "$as_me:$LINENO: result: file not found" >&5 +echo "${ECHO_T}file not found" >&6 + fi + +fi + + +fi + + + + +#-------------------------------------------------------------------- +# Compute an absolute path to the src directory of module 'tkimg' so +# that we are able to find its headers even if they are not installed. +#-------------------------------------------------------------------- + +case $tkimg_SRC_DIR in +/*) tkimg_SRC_PATH=$tkimg_SRC_DIR + ;; +*) # SRC_DIR relative, splice with BUILD_PATH + tkimg_SRC_PATH="`dirname $tkimg_BUILD_STUB_LIB_PATH`/$tkimg_SRC_DIR" +esac + +tkimg_BUILD_PATH="`dirname $tkimg_BUILD_STUB_LIB_PATH`" + +if test "${TEA_PLATFORM}" = "windows" ; then + tkimg_SRC_PATH="`$CYGPATH $tkimg_SRC_PATH`" + tkimg_BUILD_PATH="`$CYGPATH $tkimg_BUILD_PATH`" +fi + + + + + +#----------------------------------------------------------------------- +# Specify the C source files to compile in TEA_ADD_SOURCES, +# public headers that need to be installed in TEA_ADD_HEADERS, +# stub library C source files to compile in TEA_ADD_STUB_SOURCES, +# and runtime Tcl library files in TEA_ADD_TCL_SOURCES. +# This defines PKG(_STUB)_SOURCES, PKG(_STUB)_OBJECTS, PKG_HEADERS +# and PKG_TCL_SOURCES. +#----------------------------------------------------------------------- + + + vars="bmp.c" + for i in $vars; do + case $i in + \$*) + # allow $-var names + PKG_SOURCES="$PKG_SOURCES $i" + PKG_OBJECTS="$PKG_OBJECTS $i" + ;; + *) + # check for existence - allows for generic/win/unix VPATH + # To add more dirs here (like 'src'), you have to update VPATH + # in Makefile.in as well + if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ + -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ + -a ! -f "${srcdir}/macosx/$i" \ + ; then + { { echo "$as_me:$LINENO: error: could not find source file '$i'" >&5 +echo "$as_me: error: could not find source file '$i'" >&2;} + { (exit 1); exit 1; }; } + fi + PKG_SOURCES="$PKG_SOURCES $i" + # this assumes it is in a VPATH dir + i=`basename $i` + # handle user calling this before or after TEA_SETUP_COMPILER + if test x"${OBJEXT}" != x ; then + j="`echo $i | sed -e 's/\.[^.]*$//'`.${OBJEXT}" + else + j="`echo $i | sed -e 's/\.[^.]*$//'`.\${OBJEXT}" + fi + PKG_OBJECTS="$PKG_OBJECTS $j" + ;; + esac + done + + + + + vars="" + for i in $vars; do + # check for existence, be strict because it is installed + if test ! -f "${srcdir}/$i" ; then + { { echo "$as_me:$LINENO: error: could not find header file '${srcdir}/$i'" >&5 +echo "$as_me: error: could not find header file '${srcdir}/$i'" >&2;} + { (exit 1); exit 1; }; } + fi + PKG_HEADERS="$PKG_HEADERS $i" + done + + + + vars="-I\"`\${CYGPATH} \${tkimg_SRC_PATH}`\"" + for i in $vars; do + PKG_INCLUDES="$PKG_INCLUDES $i" + done + + + + vars="-I." + for i in $vars; do + PKG_INCLUDES="$PKG_INCLUDES $i" + done + + + + vars="" + for i in $vars; do + if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then + # Convert foo.lib to -lfoo for GCC. No-op if not *.lib + i=`echo "$i" | sed -e 's/^\([^-].*\)\.lib$/-l\1/i'` + fi + PKG_LIBS="$PKG_LIBS $i" + done + + + + PKG_CFLAGS="$PKG_CFLAGS " + + + + PKG_CFLAGS="$PKG_CFLAGS -DTKIMG_VERSION=\\\"\${tkimg_VERSION}\\\"" + + + + vars="" + for i in $vars; do + # check for existence - allows for generic/win/unix VPATH + if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ + -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ + -a ! -f "${srcdir}/macosx/$i" \ + ; then + { { echo "$as_me:$LINENO: error: could not find stub source file '$i'" >&5 +echo "$as_me: error: could not find stub source file '$i'" >&2;} + { (exit 1); exit 1; }; } + fi + PKG_STUB_SOURCES="$PKG_STUB_SOURCES $i" + # this assumes it is in a VPATH dir + i=`basename $i` + # handle user calling this before or after TEA_SETUP_COMPILER + if test x"${OBJEXT}" != x ; then + j="`echo $i | sed -e 's/\.[^.]*$//'`.${OBJEXT}" + else + j="`echo $i | sed -e 's/\.[^.]*$//'`.\${OBJEXT}" + fi + PKG_STUB_OBJECTS="$PKG_STUB_OBJECTS $j" + done + + + + + vars="" + for i in $vars; do + # check for existence, be strict because it is installed + if test ! -f "${srcdir}/$i" ; then + { { echo "$as_me:$LINENO: error: could not find tcl source file '${srcdir}/$i'" >&5 +echo "$as_me: error: could not find tcl source file '${srcdir}/$i'" >&2;} + { (exit 1); exit 1; }; } + fi + PKG_TCL_SOURCES="$PKG_TCL_SOURCES $i" + done + + + +PUP="`echo ${PACKAGE_NAME}| tr 'a-z' 'A-Z'`" + +sed < "`${CYGPATH} ${srcdir}/../init.c`" > "init.c" \ + -e "s/@CPACKAGE@/${CPACKAGE}/" \ + -e "s/%PACKAGE%/${PACKAGE_NAME}/" \ + -e "s/%PACKAGE_UP%/${PUP}/" \ + -e "s/%PHIMGTYPE%/${PHIMGTYPE}/" + +# init.c is an included source file, not a source by itself +# FUTURE: Do this through AC_OUTPUT!! + +#-------------------------------------------------------------------- +# __CHANGE__ +# Choose which headers you need. Extension authors should try very +# hard to only rely on the Tcl public header files. Internal headers +# contain private data structures and are subject to change without +# notice. +# This MUST be called after TEA_LOAD_TCLCONFIG / TEA_LOAD_TKCONFIG +#-------------------------------------------------------------------- + + + echo "$as_me:$LINENO: checking for Tcl public headers" >&5 +echo $ECHO_N "checking for Tcl public headers... $ECHO_C" >&6 + + +# Check whether --with-tclinclude or --without-tclinclude was given. +if test "${with_tclinclude+set}" = set; then + withval="$with_tclinclude" + with_tclinclude=${withval} +fi; + + if test "${ac_cv_c_tclh+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + # Use the value from --with-tclinclude, if it was given + + if test x"${with_tclinclude}" != x ; then + if test -f "${with_tclinclude}/tcl.h" ; then + ac_cv_c_tclh=${with_tclinclude} + else + { { echo "$as_me:$LINENO: error: ${with_tclinclude} directory does not contain tcl.h" >&5 +echo "$as_me: error: ${with_tclinclude} directory does not contain tcl.h" >&2;} + { (exit 1); exit 1; }; } + fi + else + list="" + if test "`uname -s`" = "Darwin"; then + # If Tcl was built as a framework, attempt to use + # the framework's Headers directory + case ${TCL_DEFS} in + *TCL_FRAMEWORK*) + list="`ls -d ${TCL_BIN_DIR}/Headers 2>/dev/null`" + ;; + esac + fi + + # Look in the source dir only if Tcl is not installed, + # and in that situation, look there before installed locations. + if test -f "${TCL_BIN_DIR}/Makefile" ; then + list="$list `ls -d ${TCL_SRC_DIR}/generic 2>/dev/null`" + fi + + # Check order: pkg --prefix location, Tcl's --prefix location, + # relative to directory of tclConfig.sh. + + eval "temp_includedir=${includedir}" + list="$list \ + `ls -d ${temp_includedir} 2>/dev/null` \ + `ls -d ${TCL_PREFIX}/include 2>/dev/null` \ + `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null`" + if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then + list="$list /usr/local/include /usr/include" + if test x"${TCL_INCLUDE_SPEC}" != x ; then + d=`echo "${TCL_INCLUDE_SPEC}" | sed -e 's/^-I//'` + list="$list `ls -d ${d} 2>/dev/null`" + fi + fi + for i in $list ; do + if test -f "$i/tcl.h" ; then + ac_cv_c_tclh=$i + break + fi + done + fi + +fi + + + # Print a message based on how we determined the include path + + if test x"${ac_cv_c_tclh}" = x ; then + { { echo "$as_me:$LINENO: error: tcl.h not found. Please specify its location with --with-tclinclude" >&5 +echo "$as_me: error: tcl.h not found. Please specify its location with --with-tclinclude" >&2;} + { (exit 1); exit 1; }; } + else + echo "$as_me:$LINENO: result: ${ac_cv_c_tclh}" >&5 +echo "${ECHO_T}${ac_cv_c_tclh}" >&6 + fi + + # Convert to a native path and substitute into the output files. + + INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tclh}` + + TCL_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" + + + + + echo "$as_me:$LINENO: checking for Tk public headers" >&5 +echo $ECHO_N "checking for Tk public headers... $ECHO_C" >&6 + + +# Check whether --with-tkinclude or --without-tkinclude was given. +if test "${with_tkinclude+set}" = set; then + withval="$with_tkinclude" + with_tkinclude=${withval} +fi; + + if test "${ac_cv_c_tkh+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + # Use the value from --with-tkinclude, if it was given + + if test x"${with_tkinclude}" != x ; then + if test -f "${with_tkinclude}/tk.h" ; then + ac_cv_c_tkh=${with_tkinclude} + else + { { echo "$as_me:$LINENO: error: ${with_tkinclude} directory does not contain tk.h" >&5 +echo "$as_me: error: ${with_tkinclude} directory does not contain tk.h" >&2;} + { (exit 1); exit 1; }; } + fi + else + list="" + if test "`uname -s`" = "Darwin"; then + # If Tk was built as a framework, attempt to use + # the framework's Headers directory. + case ${TK_DEFS} in + *TK_FRAMEWORK*) + list="`ls -d ${TK_BIN_DIR}/Headers 2>/dev/null`" + ;; + esac + fi + + # Look in the source dir only if Tk is not installed, + # and in that situation, look there before installed locations. + if test -f "${TK_BIN_DIR}/Makefile" ; then + list="$list `ls -d ${TK_SRC_DIR}/generic 2>/dev/null`" + fi + + # Check order: pkg --prefix location, Tk's --prefix location, + # relative to directory of tkConfig.sh, Tcl's --prefix location, + # relative to directory of tclConfig.sh. + + eval "temp_includedir=${includedir}" + list="$list \ + `ls -d ${temp_includedir} 2>/dev/null` \ + `ls -d ${TK_PREFIX}/include 2>/dev/null` \ + `ls -d ${TK_BIN_DIR}/../include 2>/dev/null` \ + `ls -d ${TCL_PREFIX}/include 2>/dev/null` \ + `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null`" + if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then + list="$list /usr/local/include /usr/include" + if test x"${TK_INCLUDE_SPEC}" != x ; then + d=`echo "${TK_INCLUDE_SPEC}" | sed -e 's/^-I//'` + list="$list `ls -d ${d} 2>/dev/null`" + fi + fi + for i in $list ; do + if test -f "$i/tk.h" ; then + ac_cv_c_tkh=$i + break + fi + done + fi + +fi + + + # Print a message based on how we determined the include path + + if test x"${ac_cv_c_tkh}" = x ; then + { { echo "$as_me:$LINENO: error: tk.h not found. Please specify its location with --with-tkinclude" >&5 +echo "$as_me: error: tk.h not found. Please specify its location with --with-tkinclude" >&2;} + { (exit 1); exit 1; }; } + else + echo "$as_me:$LINENO: result: ${ac_cv_c_tkh}" >&5 +echo "${ECHO_T}${ac_cv_c_tkh}" >&6 + fi + + # Convert to a native path and substitute into the output files. + + INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tkh}` + + TK_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" + + + + if test "${TEA_WINDOWINGSYSTEM}" != "x11"; then + # On Windows and Aqua, we need the X compat headers + echo "$as_me:$LINENO: checking for X11 header files" >&5 +echo $ECHO_N "checking for X11 header files... $ECHO_C" >&6 + if test ! -r "${INCLUDE_DIR_NATIVE}/X11/Xlib.h"; then + INCLUDE_DIR_NATIVE="`${CYGPATH} ${TK_SRC_DIR}/xlib`" + TK_XINCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" + + fi + echo "$as_me:$LINENO: result: ${INCLUDE_DIR_NATIVE}" >&5 +echo "${ECHO_T}${INCLUDE_DIR_NATIVE}" >&6 + fi + + +#-------------------------------------------------------------------- +# A few miscellaneous platform-specific items: +# +# Windows creates a few extra files that need to be cleaned up. +# We can add more files to clean if our extension creates any extra +# files in the future. +# +# Define any extra compiler flags in the PACKAGE_CFLAGS variable. +# These will be appended to the current set of compiler flags for +# your system. +#-------------------------------------------------------------------- + +if test "${TEA_PLATFORM}" = "windows" ; then + CLEANFILES="*.lib *.dll *.exp *.ilk *.pdb vc*.pch init.c" +else + CLEANFILES="init.c" +fi + + +#-------------------------------------------------------------------- +# Check whether --enable-threads or --disable-threads was given. +# So far only Tcl responds to this one. +#-------------------------------------------------------------------- + + + # Check whether --enable-threads or --disable-threads was given. +if test "${enable_threads+set}" = set; then + enableval="$enable_threads" + tcl_ok=$enableval +else + tcl_ok=yes +fi; + + if test "${enable_threads+set}" = set; then + enableval="$enable_threads" + tcl_ok=$enableval + else + tcl_ok=yes + fi + + if test "$tcl_ok" = "yes" -o "${TCL_THREADS}" = 1; then + TCL_THREADS=1 + + if test "${TEA_PLATFORM}" != "windows" ; then + # We are always OK on Windows, so check what this platform wants: + + # USE_THREAD_ALLOC tells us to try the special thread-based + # allocator that significantly reduces lock contention + +cat >>confdefs.h <<\_ACEOF +#define USE_THREAD_ALLOC 1 +_ACEOF + + +cat >>confdefs.h <<\_ACEOF +#define _REENTRANT 1 +_ACEOF + + if test "`uname -s`" = "SunOS" ; then + +cat >>confdefs.h <<\_ACEOF +#define _POSIX_PTHREAD_SEMANTICS 1 +_ACEOF + + fi + +cat >>confdefs.h <<\_ACEOF +#define _THREAD_SAFE 1 +_ACEOF + + echo "$as_me:$LINENO: checking for pthread_mutex_init in -lpthread" >&5 +echo $ECHO_N "checking for pthread_mutex_init in -lpthread... $ECHO_C" >&6 +if test "${ac_cv_lib_pthread_pthread_mutex_init+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lpthread $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char pthread_mutex_init (); +int +main () +{ +pthread_mutex_init (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_pthread_pthread_mutex_init=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_pthread_pthread_mutex_init=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_pthread_pthread_mutex_init" >&5 +echo "${ECHO_T}$ac_cv_lib_pthread_pthread_mutex_init" >&6 +if test $ac_cv_lib_pthread_pthread_mutex_init = yes; then + tcl_ok=yes +else + tcl_ok=no +fi + + if test "$tcl_ok" = "no"; then + # Check a little harder for __pthread_mutex_init in the same + # library, as some systems hide it there until pthread.h is + # defined. We could alternatively do an AC_TRY_COMPILE with + # pthread.h, but that will work with libpthread really doesn't + # exist, like AIX 4.2. [Bug: 4359] + echo "$as_me:$LINENO: checking for __pthread_mutex_init in -lpthread" >&5 +echo $ECHO_N "checking for __pthread_mutex_init in -lpthread... $ECHO_C" >&6 +if test "${ac_cv_lib_pthread___pthread_mutex_init+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lpthread $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char __pthread_mutex_init (); +int +main () +{ +__pthread_mutex_init (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_pthread___pthread_mutex_init=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_pthread___pthread_mutex_init=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_pthread___pthread_mutex_init" >&5 +echo "${ECHO_T}$ac_cv_lib_pthread___pthread_mutex_init" >&6 +if test $ac_cv_lib_pthread___pthread_mutex_init = yes; then + tcl_ok=yes +else + tcl_ok=no +fi + + fi + + if test "$tcl_ok" = "yes"; then + # The space is needed + THREADS_LIBS=" -lpthread" + else + echo "$as_me:$LINENO: checking for pthread_mutex_init in -lpthreads" >&5 +echo $ECHO_N "checking for pthread_mutex_init in -lpthreads... $ECHO_C" >&6 +if test "${ac_cv_lib_pthreads_pthread_mutex_init+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lpthreads $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char pthread_mutex_init (); +int +main () +{ +pthread_mutex_init (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_pthreads_pthread_mutex_init=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_pthreads_pthread_mutex_init=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_pthreads_pthread_mutex_init" >&5 +echo "${ECHO_T}$ac_cv_lib_pthreads_pthread_mutex_init" >&6 +if test $ac_cv_lib_pthreads_pthread_mutex_init = yes; then + tcl_ok=yes +else + tcl_ok=no +fi + + if test "$tcl_ok" = "yes"; then + # The space is needed + THREADS_LIBS=" -lpthreads" + else + echo "$as_me:$LINENO: checking for pthread_mutex_init in -lc" >&5 +echo $ECHO_N "checking for pthread_mutex_init in -lc... $ECHO_C" >&6 +if test "${ac_cv_lib_c_pthread_mutex_init+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lc $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char pthread_mutex_init (); +int +main () +{ +pthread_mutex_init (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_c_pthread_mutex_init=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_c_pthread_mutex_init=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_c_pthread_mutex_init" >&5 +echo "${ECHO_T}$ac_cv_lib_c_pthread_mutex_init" >&6 +if test $ac_cv_lib_c_pthread_mutex_init = yes; then + tcl_ok=yes +else + tcl_ok=no +fi + + if test "$tcl_ok" = "no"; then + echo "$as_me:$LINENO: checking for pthread_mutex_init in -lc_r" >&5 +echo $ECHO_N "checking for pthread_mutex_init in -lc_r... $ECHO_C" >&6 +if test "${ac_cv_lib_c_r_pthread_mutex_init+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lc_r $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char pthread_mutex_init (); +int +main () +{ +pthread_mutex_init (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_c_r_pthread_mutex_init=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_c_r_pthread_mutex_init=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_c_r_pthread_mutex_init" >&5 +echo "${ECHO_T}$ac_cv_lib_c_r_pthread_mutex_init" >&6 +if test $ac_cv_lib_c_r_pthread_mutex_init = yes; then + tcl_ok=yes +else + tcl_ok=no +fi + + if test "$tcl_ok" = "yes"; then + # The space is needed + THREADS_LIBS=" -pthread" + else + TCL_THREADS=0 + { echo "$as_me:$LINENO: WARNING: Do not know how to find pthread lib on your system - thread support disabled" >&5 +echo "$as_me: WARNING: Do not know how to find pthread lib on your system - thread support disabled" >&2;} + fi + fi + fi + fi + fi + else + TCL_THREADS=0 + fi + # Do checking message here to not mess up interleaved configure output + echo "$as_me:$LINENO: checking for building with threads" >&5 +echo $ECHO_N "checking for building with threads... $ECHO_C" >&6 + if test "${TCL_THREADS}" = 1; then + +cat >>confdefs.h <<\_ACEOF +#define TCL_THREADS 1 +_ACEOF + + echo "$as_me:$LINENO: result: yes (default)" >&5 +echo "${ECHO_T}yes (default)" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 + fi + # TCL_THREADS sanity checking. See if our request for building with + # threads is the same as the way Tcl was built. If not, warn the user. + case ${TCL_DEFS} in + *THREADS=1*) + if test "${TCL_THREADS}" = "0"; then + { echo "$as_me:$LINENO: WARNING: + Building ${PACKAGE_NAME} without threads enabled, but building against Tcl + that IS thread-enabled. It is recommended to use --enable-threads." >&5 +echo "$as_me: WARNING: + Building ${PACKAGE_NAME} without threads enabled, but building against Tcl + that IS thread-enabled. It is recommended to use --enable-threads." >&2;} + fi + ;; + *) + if test "${TCL_THREADS}" = "1"; then + { echo "$as_me:$LINENO: WARNING: + --enable-threads requested, but building against a Tcl that is NOT + thread-enabled. This is an OK configuration that will also run in + a thread-enabled core." >&5 +echo "$as_me: WARNING: + --enable-threads requested, but building against a Tcl that is NOT + thread-enabled. This is an OK configuration that will also run in + a thread-enabled core." >&2;} + fi + ;; + esac + + + +#-------------------------------------------------------------------- +# The statement below defines a collection of symbols related to +# building as a shared library instead of a static library. +#-------------------------------------------------------------------- + + + echo "$as_me:$LINENO: checking how to build libraries" >&5 +echo $ECHO_N "checking how to build libraries... $ECHO_C" >&6 + # Check whether --enable-shared or --disable-shared was given. +if test "${enable_shared+set}" = set; then + enableval="$enable_shared" + tcl_ok=$enableval +else + tcl_ok=yes +fi; + + if test "${enable_shared+set}" = set; then + enableval="$enable_shared" + tcl_ok=$enableval + else + tcl_ok=yes + fi + + if test "$tcl_ok" = "yes" ; then + echo "$as_me:$LINENO: result: shared" >&5 +echo "${ECHO_T}shared" >&6 + SHARED_BUILD=1 + else + echo "$as_me:$LINENO: result: static" >&5 +echo "${ECHO_T}static" >&6 + SHARED_BUILD=0 + +cat >>confdefs.h <<\_ACEOF +#define STATIC_BUILD 1 +_ACEOF + + fi + + + +#-------------------------------------------------------------------- +# This macro figures out what flags to use with the compiler/linker +# when building shared/static debug/optimized objects. This information +# can be taken from the tclConfig.sh file, but this figures it all out. +#-------------------------------------------------------------------- + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + echo "$as_me:$LINENO: result: $RANLIB" >&5 +echo "${ECHO_T}$RANLIB" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 +echo "${ECHO_T}$ac_ct_RANLIB" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + RANLIB=$ac_ct_RANLIB +else + RANLIB="$ac_cv_prog_RANLIB" +fi + + + + + # Step 0.a: Enable 64 bit support? + + echo "$as_me:$LINENO: checking if 64bit support is requested" >&5 +echo $ECHO_N "checking if 64bit support is requested... $ECHO_C" >&6 + # Check whether --enable-64bit or --disable-64bit was given. +if test "${enable_64bit+set}" = set; then + enableval="$enable_64bit" + do64bit=$enableval +else + do64bit=no +fi; + echo "$as_me:$LINENO: result: $do64bit" >&5 +echo "${ECHO_T}$do64bit" >&6 + + # Step 0.b: Enable Solaris 64 bit VIS support? + + echo "$as_me:$LINENO: checking if 64bit Sparc VIS support is requested" >&5 +echo $ECHO_N "checking if 64bit Sparc VIS support is requested... $ECHO_C" >&6 + # Check whether --enable-64bit-vis or --disable-64bit-vis was given. +if test "${enable_64bit_vis+set}" = set; then + enableval="$enable_64bit_vis" + do64bitVIS=$enableval +else + do64bitVIS=no +fi; + echo "$as_me:$LINENO: result: $do64bitVIS" >&5 +echo "${ECHO_T}$do64bitVIS" >&6 + # Force 64bit on with VIS + if test "$do64bitVIS" = "yes"; then + do64bit=yes +fi + + + # Step 0.c: Check if visibility support is available. Do this here so + # that platform specific alternatives can be used below if this fails. + + echo "$as_me:$LINENO: checking if compiler supports visibility \"hidden\"" >&5 +echo $ECHO_N "checking if compiler supports visibility \"hidden\"... $ECHO_C" >&6 +if test "${tcl_cv_cc_visibility_hidden+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -Werror" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + + extern __attribute__((__visibility__("hidden"))) void f(void); + void f(void) {} +int +main () +{ +f(); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_cc_visibility_hidden=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_cc_visibility_hidden=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + CFLAGS=$hold_cflags +fi +echo "$as_me:$LINENO: result: $tcl_cv_cc_visibility_hidden" >&5 +echo "${ECHO_T}$tcl_cv_cc_visibility_hidden" >&6 + if test $tcl_cv_cc_visibility_hidden = yes; then + + +cat >>confdefs.h <<\_ACEOF +#define MODULE_SCOPE extern __attribute__((__visibility__("hidden"))) +_ACEOF + + +cat >>confdefs.h <<\_ACEOF +#define HAVE_HIDDEN 1 +_ACEOF + + +fi + + + # Step 0.d: Disable -rpath support? + + echo "$as_me:$LINENO: checking if rpath support is requested" >&5 +echo $ECHO_N "checking if rpath support is requested... $ECHO_C" >&6 + # Check whether --enable-rpath or --disable-rpath was given. +if test "${enable_rpath+set}" = set; then + enableval="$enable_rpath" + doRpath=$enableval +else + doRpath=yes +fi; + echo "$as_me:$LINENO: result: $doRpath" >&5 +echo "${ECHO_T}$doRpath" >&6 + + # TEA specific: Cross-compiling options for Windows/CE builds? + + if test "${TEA_PLATFORM}" = windows; then + + echo "$as_me:$LINENO: checking if Windows/CE build is requested" >&5 +echo $ECHO_N "checking if Windows/CE build is requested... $ECHO_C" >&6 + # Check whether --enable-wince or --disable-wince was given. +if test "${enable_wince+set}" = set; then + enableval="$enable_wince" + doWince=$enableval +else + doWince=no +fi; + echo "$as_me:$LINENO: result: $doWince" >&5 +echo "${ECHO_T}$doWince" >&6 + +fi + + + # Set the variable "system" to hold the name and version number + # for the system. + + + echo "$as_me:$LINENO: checking system version" >&5 +echo $ECHO_N "checking system version... $ECHO_C" >&6 +if test "${tcl_cv_sys_version+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + # TEA specific: + if test "${TEA_PLATFORM}" = "windows" ; then + tcl_cv_sys_version=windows + else + tcl_cv_sys_version=`uname -s`-`uname -r` + if test "$?" -ne 0 ; then + { echo "$as_me:$LINENO: WARNING: can't find uname command" >&5 +echo "$as_me: WARNING: can't find uname command" >&2;} + tcl_cv_sys_version=unknown + else + if test "`uname -s`" = "AIX" ; then + tcl_cv_sys_version=AIX-`uname -v`.`uname -r` + fi + fi + fi + +fi +echo "$as_me:$LINENO: result: $tcl_cv_sys_version" >&5 +echo "${ECHO_T}$tcl_cv_sys_version" >&6 + system=$tcl_cv_sys_version + + + # Require ranlib early so we can override it in special cases below. + + + + # Set configuration options based on system name and version. + # This is similar to Tcl's unix/tcl.m4 except that we've added a + # "windows" case and removed some core-only vars. + + do64bit_ok=no + # default to '{$LIBS}' and set to "" on per-platform necessary basis + SHLIB_LD_LIBS='${LIBS}' + # When ld needs options to work in 64-bit mode, put them in + # LDFLAGS_ARCH so they eventually end up in LDFLAGS even if [load] + # is disabled by the user. [Bug 1016796] + LDFLAGS_ARCH="" + UNSHARED_LIB_SUFFIX="" + # TEA specific: use PACKAGE_VERSION instead of VERSION + TCL_TRIM_DOTS='`echo ${PACKAGE_VERSION} | tr -d .`' + ECHO_VERSION='`echo ${PACKAGE_VERSION}`' + TCL_LIB_VERSIONS_OK=ok + CFLAGS_DEBUG=-g + if test "$GCC" = yes; then + + CFLAGS_OPTIMIZE=-O2 + CFLAGS_WARNING="-Wall -Wwrite-strings" + +else + + CFLAGS_OPTIMIZE=-O + CFLAGS_WARNING="" + +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. +set dummy ${ac_tool_prefix}ar; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_AR+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AR="${ac_tool_prefix}ar" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +AR=$ac_cv_prog_AR +if test -n "$AR"; then + echo "$as_me:$LINENO: result: $AR" >&5 +echo "${ECHO_T}$AR" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_AR"; then + ac_ct_AR=$AR + # Extract the first word of "ar", so it can be a program name with args. +set dummy ar; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_AR+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_AR="ar" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_AR=$ac_cv_prog_ac_ct_AR +if test -n "$ac_ct_AR"; then + echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 +echo "${ECHO_T}$ac_ct_AR" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + AR=$ac_ct_AR +else + AR="$ac_cv_prog_AR" +fi + + STLIB_LD='${AR} cr' + LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH" + if test "x$SHLIB_VERSION" = x; then + SHLIB_VERSION="" +else + SHLIB_VERSION=".$SHLIB_VERSION" +fi + + case $system in + # TEA specific: + windows) + # This is a 2-stage check to make sure we have the 64-bit SDK + # We have to know where the SDK is installed. + # This magic is based on MS Platform SDK for Win2003 SP1 - hobbs + # MACHINE is IX86 for LINK, but this is used by the manifest, + # which requires x86|amd64|ia64. + MACHINE="X86" + if test "$do64bit" != "no" ; then + if test "x${MSSDK}x" = "xx" ; then + MSSDK="C:/Progra~1/Microsoft Platform SDK" + fi + MSSDK=`echo "$MSSDK" | sed -e 's!\\\!/!g'` + PATH64="" + case "$do64bit" in + amd64|x64|yes) + MACHINE="AMD64" ; # default to AMD64 64-bit build + PATH64="${MSSDK}/Bin/Win64/x86/AMD64" + ;; + ia64) + MACHINE="IA64" + PATH64="${MSSDK}/Bin/Win64" + ;; + esac + if test "$GCC" != "yes" -a ! -d "${PATH64}" ; then + { echo "$as_me:$LINENO: WARNING: Could not find 64-bit $MACHINE SDK to enable 64bit mode" >&5 +echo "$as_me: WARNING: Could not find 64-bit $MACHINE SDK to enable 64bit mode" >&2;} + { echo "$as_me:$LINENO: WARNING: Ensure latest Platform SDK is installed" >&5 +echo "$as_me: WARNING: Ensure latest Platform SDK is installed" >&2;} + do64bit="no" + else + echo "$as_me:$LINENO: result: Using 64-bit $MACHINE mode" >&5 +echo "${ECHO_T} Using 64-bit $MACHINE mode" >&6 + do64bit_ok="yes" + fi + fi + + if test "$doWince" != "no" ; then + if test "$do64bit" != "no" ; then + { { echo "$as_me:$LINENO: error: Windows/CE and 64-bit builds incompatible" >&5 +echo "$as_me: error: Windows/CE and 64-bit builds incompatible" >&2;} + { (exit 1); exit 1; }; } + fi + if test "$GCC" = "yes" ; then + { { echo "$as_me:$LINENO: error: Windows/CE and GCC builds incompatible" >&5 +echo "$as_me: error: Windows/CE and GCC builds incompatible" >&2;} + { (exit 1); exit 1; }; } + fi + + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-celib + + if test x"${no_celib}" = x ; then + # we reset no_celib in case something fails here + no_celib=true + +# Check whether --with-celib or --without-celib was given. +if test "${with_celib+set}" = set; then + withval="$with_celib" + with_celibconfig=${withval} +fi; + echo "$as_me:$LINENO: checking for Windows/CE celib directory" >&5 +echo $ECHO_N "checking for Windows/CE celib directory... $ECHO_C" >&6 + if test "${ac_cv_c_celibconfig+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + # First check to see if --with-celibconfig was specified. + if test x"${with_celibconfig}" != x ; then + if test -d "${with_celibconfig}/inc" ; then + ac_cv_c_celibconfig=`(cd ${with_celibconfig}; pwd)` + else + { { echo "$as_me:$LINENO: error: ${with_celibconfig} directory doesn't contain inc directory" >&5 +echo "$as_me: error: ${with_celibconfig} directory doesn't contain inc directory" >&2;} + { (exit 1); exit 1; }; } + fi + fi + + # then check for a celib library + if test x"${ac_cv_c_celibconfig}" = x ; then + for i in \ + ../celib-palm-3.0 \ + ../celib \ + ../../celib-palm-3.0 \ + ../../celib \ + `ls -dr ../celib-*3.[0-9]* 2>/dev/null` \ + ${srcdir}/../celib-palm-3.0 \ + ${srcdir}/../celib \ + `ls -dr ${srcdir}/../celib-*3.[0-9]* 2>/dev/null` \ + ; do + if test -d "$i/inc" ; then + ac_cv_c_celibconfig=`(cd $i; pwd)` + break + fi + done + fi + +fi + + if test x"${ac_cv_c_celibconfig}" = x ; then + { { echo "$as_me:$LINENO: error: Cannot find celib support library directory" >&5 +echo "$as_me: error: Cannot find celib support library directory" >&2;} + { (exit 1); exit 1; }; } + else + no_celib= + CELIB_DIR=${ac_cv_c_celibconfig} + CELIB_DIR=`echo "$CELIB_DIR" | sed -e 's!\\\!/!g'` + echo "$as_me:$LINENO: result: found $CELIB_DIR" >&5 +echo "${ECHO_T}found $CELIB_DIR" >&6 + fi + fi + + # Set defaults for common evc4/PPC2003 setup + # Currently Tcl requires 300+, possibly 420+ for sockets + CEVERSION=420; # could be 211 300 301 400 420 ... + TARGETCPU=ARMV4; # could be ARMV4 ARM MIPS SH3 X86 ... + ARCH=ARM; # could be ARM MIPS X86EM ... + PLATFORM="Pocket PC 2003"; # or "Pocket PC 2002" + if test "$doWince" != "yes"; then + # If !yes then the user specified something + # Reset ARCH to allow user to skip specifying it + ARCH= + eval `echo $doWince | awk -F, '{ \ + if (length($1)) { printf "CEVERSION=\"%s\"\n", $1; \ + if ($1 < 400) { printf "PLATFORM=\"Pocket PC 2002\"\n" } }; \ + if (length($2)) { printf "TARGETCPU=\"%s\"\n", toupper($2) }; \ + if (length($3)) { printf "ARCH=\"%s\"\n", toupper($3) }; \ + if (length($4)) { printf "PLATFORM=\"%s\"\n", $4 }; \ + }'` + if test "x${ARCH}" = "x" ; then + ARCH=$TARGETCPU; + fi + fi + OSVERSION=WCE$CEVERSION; + if test "x${WCEROOT}" = "x" ; then + WCEROOT="C:/Program Files/Microsoft eMbedded C++ 4.0" + if test ! -d "${WCEROOT}" ; then + WCEROOT="C:/Program Files/Microsoft eMbedded Tools" + fi + fi + if test "x${SDKROOT}" = "x" ; then + SDKROOT="C:/Program Files/Windows CE Tools" + if test ! -d "${SDKROOT}" ; then + SDKROOT="C:/Windows CE Tools" + fi + fi + WCEROOT=`echo "$WCEROOT" | sed -e 's!\\\!/!g'` + SDKROOT=`echo "$SDKROOT" | sed -e 's!\\\!/!g'` + if test ! -d "${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" \ + -o ! -d "${WCEROOT}/EVC/${OSVERSION}/bin"; then + { { echo "$as_me:$LINENO: error: could not find PocketPC SDK or target compiler to enable WinCE mode $CEVERSION,$TARGETCPU,$ARCH,$PLATFORM" >&5 +echo "$as_me: error: could not find PocketPC SDK or target compiler to enable WinCE mode $CEVERSION,$TARGETCPU,$ARCH,$PLATFORM" >&2;} + { (exit 1); exit 1; }; } + doWince="no" + else + # We could PATH_NOSPACE these, but that's not important, + # as long as we quote them when used. + CEINCLUDE="${SDKROOT}/${OSVERSION}/${PLATFORM}/include" + if test -d "${CEINCLUDE}/${TARGETCPU}" ; then + CEINCLUDE="${CEINCLUDE}/${TARGETCPU}" + fi + CELIBPATH="${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" + fi + fi + + if test "$GCC" != "yes" ; then + if test "${SHARED_BUILD}" = "0" ; then + runtime=-MT + else + runtime=-MD + fi + + if test "$do64bit" != "no" ; then + # All this magic is necessary for the Win64 SDK RC1 - hobbs + CC="\"${PATH64}/cl.exe\"" + CFLAGS="${CFLAGS} -I\"${MSSDK}/Include\" -I\"${MSSDK}/Include/crt\" -I\"${MSSDK}/Include/crt/sys\"" + RC="\"${MSSDK}/bin/rc.exe\"" + lflags="-nologo -MACHINE:${MACHINE} -LIBPATH:\"${MSSDK}/Lib/${MACHINE}\"" + LINKBIN="\"${PATH64}/link.exe\"" + CFLAGS_DEBUG="-nologo -Zi -Od -W3 ${runtime}d" + CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}" + # Avoid 'unresolved external symbol __security_cookie' + # errors, c.f. http://support.microsoft.com/?id=894573 + + vars="bufferoverflowU.lib" + for i in $vars; do + if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then + # Convert foo.lib to -lfoo for GCC. No-op if not *.lib + i=`echo "$i" | sed -e 's/^\([^-].*\)\.lib$/-l\1/i'` + fi + PKG_LIBS="$PKG_LIBS $i" + done + + + elif test "$doWince" != "no" ; then + CEBINROOT="${WCEROOT}/EVC/${OSVERSION}/bin" + if test "${TARGETCPU}" = "X86"; then + CC="\"${CEBINROOT}/cl.exe\"" + else + CC="\"${CEBINROOT}/cl${ARCH}.exe\"" + fi + CFLAGS="$CFLAGS -I\"${CELIB_DIR}/inc\" -I\"${CEINCLUDE}\"" + RC="\"${WCEROOT}/Common/EVC/bin/rc.exe\"" + arch=`echo ${ARCH} | awk '{print tolower($0)}'` + defs="${ARCH} _${ARCH}_ ${arch} PALM_SIZE _MT _WINDOWS" + if test "${SHARED_BUILD}" = "1" ; then + # Static CE builds require static celib as well + defs="${defs} _DLL" + fi + for i in $defs ; do + +cat >>confdefs.h <<_ACEOF +#define $i 1 +_ACEOF + + done + +cat >>confdefs.h <<_ACEOF +#define _WIN32_WCE $CEVERSION +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define UNDER_CE $CEVERSION +_ACEOF + + CFLAGS_DEBUG="-nologo -Zi -Od" + CFLAGS_OPTIMIZE="-nologo -Ox" + lversion=`echo ${CEVERSION} | sed -e 's/\(.\)\(..\)/\1\.\2/'` + lflags="-MACHINE:${ARCH} -LIBPATH:\"${CELIBPATH}\" -subsystem:windowsce,${lversion} -nologo" + LINKBIN="\"${CEBINROOT}/link.exe\"" + + else + RC="rc" + lflags="-nologo" + LINKBIN="link" + CFLAGS_DEBUG="-nologo -Z7 -Od -W3 -WX ${runtime}d" + CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}" + fi + fi + + if test "$GCC" = "yes"; then + # mingw gcc mode + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}windres", so it can be a program name with args. +set dummy ${ac_tool_prefix}windres; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_RC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$RC"; then + ac_cv_prog_RC="$RC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RC="${ac_tool_prefix}windres" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +RC=$ac_cv_prog_RC +if test -n "$RC"; then + echo "$as_me:$LINENO: result: $RC" >&5 +echo "${ECHO_T}$RC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_RC"; then + ac_ct_RC=$RC + # Extract the first word of "windres", so it can be a program name with args. +set dummy windres; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_RC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_RC"; then + ac_cv_prog_ac_ct_RC="$ac_ct_RC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RC="windres" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_RC=$ac_cv_prog_ac_ct_RC +if test -n "$ac_ct_RC"; then + echo "$as_me:$LINENO: result: $ac_ct_RC" >&5 +echo "${ECHO_T}$ac_ct_RC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + RC=$ac_ct_RC +else + RC="$ac_cv_prog_RC" +fi + + CFLAGS_DEBUG="-g" + CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer" + SHLIB_LD='${CC} -shared' + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' + LDFLAGS_CONSOLE="-wl,--subsystem,console ${lflags}" + LDFLAGS_WINDOW="-wl,--subsystem,windows ${lflags}" + + echo "$as_me:$LINENO: checking for cross-compile version of gcc" >&5 +echo $ECHO_N "checking for cross-compile version of gcc... $ECHO_C" >&6 +if test "${ac_cv_cross+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + + #ifdef _WIN32 + #error cross-compiler + #endif + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_cross=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_cross=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +fi +echo "$as_me:$LINENO: result: $ac_cv_cross" >&5 +echo "${ECHO_T}$ac_cv_cross" >&6 + if test "$ac_cv_cross" = "yes"; then + case "$do64bit" in + amd64|x64|yes) + CC="x86_64-w64-mingw32-gcc" + LD="x86_64-w64-mingw32-ld" + AR="x86_64-w64-mingw32-ar" + RANLIB="x86_64-w64-mingw32-ranlib" + RC="x86_64-w64-mingw32-windres" + ;; + *) + CC="i686-w64-mingw32-gcc" + LD="i686-w64-mingw32-ld" + AR="i686-w64-mingw32-ar" + RANLIB="i686-w64-mingw32-ranlib" + RC="i686-w64-mingw32-windres" + ;; + esac + fi + + else + SHLIB_LD="${LINKBIN} -dll ${lflags}" + # link -lib only works when -lib is the first arg + STLIB_LD="${LINKBIN} -lib ${lflags}" + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.lib' + PATHTYPE=-w + # For information on what debugtype is most useful, see: + # http://msdn.microsoft.com/library/en-us/dnvc60/html/gendepdebug.asp + # and also + # http://msdn2.microsoft.com/en-us/library/y0zzbyt4%28VS.80%29.aspx + # This essentially turns it all on. + LDFLAGS_DEBUG="-debug -debugtype:cv" + LDFLAGS_OPTIMIZE="-release" + if test "$doWince" != "no" ; then + LDFLAGS_CONSOLE="-link ${lflags}" + LDFLAGS_WINDOW=${LDFLAGS_CONSOLE} + else + LDFLAGS_CONSOLE="-link -subsystem:console ${lflags}" + LDFLAGS_WINDOW="-link -subsystem:windows ${lflags}" + fi + fi + + SHLIB_SUFFIX=".dll" + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.dll' + + TCL_LIB_VERSIONS_OK=nodots + ;; + AIX-*) + if test "${TCL_THREADS}" = "1" -a "$GCC" != "yes"; then + + # AIX requires the _r compiler when gcc isn't being used + case "${CC}" in + *_r|*_r\ *) + # ok ... + ;; + *) + # Make sure only first arg gets _r + CC=`echo "$CC" | sed -e 's/^\([^ ]*\)/\1_r/'` + ;; + esac + echo "$as_me:$LINENO: result: Using $CC for compiling with threads" >&5 +echo "${ECHO_T}Using $CC for compiling with threads" >&6 + +fi + + LIBS="$LIBS -lc" + SHLIB_CFLAGS="" + SHLIB_SUFFIX=".so" + + LD_LIBRARY_PATH_VAR="LIBPATH" + + # Check to enable 64-bit flags for compiler/linker + if test "$do64bit" = yes; then + + if test "$GCC" = yes; then + + { echo "$as_me:$LINENO: WARNING: 64bit mode not supported with GCC on $system" >&5 +echo "$as_me: WARNING: 64bit mode not supported with GCC on $system" >&2;} + +else + + do64bit_ok=yes + CFLAGS="$CFLAGS -q64" + LDFLAGS_ARCH="-q64" + RANLIB="${RANLIB} -X64" + AR="${AR} -X64" + SHLIB_LD_FLAGS="-b64" + +fi + + +fi + + + if test "`uname -m`" = ia64; then + + # AIX-5 uses ELF style dynamic libraries on IA-64, but not PPC + SHLIB_LD="/usr/ccs/bin/ld -G -z text" + if test "$GCC" = yes; then + + CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + +else + + CC_SEARCH_FLAGS='-R${LIB_RUNTIME_DIR}' + +fi + + LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' + +else + + if test "$GCC" = yes; then + + SHLIB_LD='${CC} -shared -Wl,-bexpall' + +else + + SHLIB_LD="/bin/ld -bhalt:4 -bM:SRE -bexpall -H512 -T512 -bnoentry" + LDFLAGS="$LDFLAGS -brtl" + +fi + + SHLIB_LD="${SHLIB_LD} ${SHLIB_LD_FLAGS}" + CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + +fi + + ;; + BeOS*) + SHLIB_CFLAGS="-fPIC" + SHLIB_LD='${CC} -nostart' + SHLIB_SUFFIX=".so" + + #----------------------------------------------------------- + # Check for inet_ntoa in -lbind, for BeOS (which also needs + # -lsocket, even if the network functions are in -lnet which + # is always linked to, for compatibility. + #----------------------------------------------------------- + echo "$as_me:$LINENO: checking for inet_ntoa in -lbind" >&5 +echo $ECHO_N "checking for inet_ntoa in -lbind... $ECHO_C" >&6 +if test "${ac_cv_lib_bind_inet_ntoa+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lbind $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char inet_ntoa (); +int +main () +{ +inet_ntoa (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_bind_inet_ntoa=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_bind_inet_ntoa=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_bind_inet_ntoa" >&5 +echo "${ECHO_T}$ac_cv_lib_bind_inet_ntoa" >&6 +if test $ac_cv_lib_bind_inet_ntoa = yes; then + LIBS="$LIBS -lbind -lsocket" +fi + + ;; + BSD/OS-4.*) + SHLIB_CFLAGS="-export-dynamic -fPIC" + SHLIB_LD='${CC} -shared' + SHLIB_SUFFIX=".so" + LDFLAGS="$LDFLAGS -export-dynamic" + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + CYGWIN_*) + SHLIB_CFLAGS="" + SHLIB_LD='${CC} -shared' + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} -Wl,--out-implib,\$@.a" + SHLIB_SUFFIX=".dll" + EXEEXT=".exe" + do64bit_ok=yes + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + Haiku*) + LDFLAGS="$LDFLAGS -Wl,--export-dynamic" + SHLIB_CFLAGS="-fPIC" + SHLIB_SUFFIX=".so" + SHLIB_LD='${CC} -shared ${CFLAGS} ${LDFLAGS}' + echo "$as_me:$LINENO: checking for inet_ntoa in -lnetwork" >&5 +echo $ECHO_N "checking for inet_ntoa in -lnetwork... $ECHO_C" >&6 +if test "${ac_cv_lib_network_inet_ntoa+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lnetwork $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char inet_ntoa (); +int +main () +{ +inet_ntoa (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_network_inet_ntoa=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_network_inet_ntoa=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_network_inet_ntoa" >&5 +echo "${ECHO_T}$ac_cv_lib_network_inet_ntoa" >&6 +if test $ac_cv_lib_network_inet_ntoa = yes; then + LIBS="$LIBS -lnetwork" +fi + + ;; + HP-UX-*.11.*) + # Use updated header definitions where possible + +cat >>confdefs.h <<\_ACEOF +#define _XOPEN_SOURCE_EXTENDED 1 +_ACEOF + + # TEA specific: Needed by Tcl, but not most extensions + #AC_DEFINE(_XOPEN_SOURCE, 1, [Do we want to use the XOPEN network library?]) + #LIBS="$LIBS -lxnet" # Use the XOPEN network library + + if test "`uname -m`" = ia64; then + + SHLIB_SUFFIX=".so" + # Use newer C++ library for C++ extensions + #if test "$GCC" != "yes" ; then + # CPPFLAGS="-AA" + #fi + +else + + SHLIB_SUFFIX=".sl" + +fi + + echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 +echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 +if test "${ac_cv_lib_dld_shl_load+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char shl_load (); +int +main () +{ +shl_load (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_dld_shl_load=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_dld_shl_load=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 +echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 +if test $ac_cv_lib_dld_shl_load = yes; then + tcl_ok=yes +else + tcl_ok=no +fi + + if test "$tcl_ok" = yes; then + + LDFLAGS="$LDFLAGS -Wl,-E" + CC_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.' + LD_SEARCH_FLAGS='+s +b ${LIB_RUNTIME_DIR}:.' + LD_LIBRARY_PATH_VAR="SHLIB_PATH" + +fi + + if test "$GCC" = yes; then + + SHLIB_LD='${CC} -shared' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + +else + + CFLAGS="$CFLAGS -z" + # Users may want PA-RISC 1.1/2.0 portable code - needs HP cc + #CFLAGS="$CFLAGS +DAportable" + SHLIB_CFLAGS="+z" + SHLIB_LD="ld -b" + +fi + + + # Check to enable 64-bit flags for compiler/linker + if test "$do64bit" = "yes"; then + + if test "$GCC" = yes; then + + case `${CC} -dumpmachine` in + hppa64*) + # 64-bit gcc in use. Fix flags for GNU ld. + do64bit_ok=yes + SHLIB_LD='${CC} -shared' + if test $doRpath = yes; then + + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' +fi + + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + ;; + *) + { echo "$as_me:$LINENO: WARNING: 64bit mode not supported with GCC on $system" >&5 +echo "$as_me: WARNING: 64bit mode not supported with GCC on $system" >&2;} + ;; + esac + +else + + do64bit_ok=yes + CFLAGS="$CFLAGS +DD64" + LDFLAGS_ARCH="+DD64" + +fi + + +fi + ;; + IRIX-6.*) + SHLIB_CFLAGS="" + SHLIB_LD="ld -n32 -shared -rdata_shared" + SHLIB_SUFFIX=".so" + if test $doRpath = yes; then + + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' +fi + + if test "$GCC" = yes; then + + CFLAGS="$CFLAGS -mabi=n32" + LDFLAGS="$LDFLAGS -mabi=n32" + +else + + case $system in + IRIX-6.3) + # Use to build 6.2 compatible binaries on 6.3. + CFLAGS="$CFLAGS -n32 -D_OLD_TERMIOS" + ;; + *) + CFLAGS="$CFLAGS -n32" + ;; + esac + LDFLAGS="$LDFLAGS -n32" + +fi + + ;; + IRIX64-6.*) + SHLIB_CFLAGS="" + SHLIB_LD="ld -n32 -shared -rdata_shared" + SHLIB_SUFFIX=".so" + if test $doRpath = yes; then + + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' +fi + + + # Check to enable 64-bit flags for compiler/linker + + if test "$do64bit" = yes; then + + if test "$GCC" = yes; then + + { echo "$as_me:$LINENO: WARNING: 64bit mode not supported by gcc" >&5 +echo "$as_me: WARNING: 64bit mode not supported by gcc" >&2;} + +else + + do64bit_ok=yes + SHLIB_LD="ld -64 -shared -rdata_shared" + CFLAGS="$CFLAGS -64" + LDFLAGS_ARCH="-64" + +fi + + +fi + + ;; + Linux*|GNU*|NetBSD-Debian) + SHLIB_CFLAGS="-fPIC" + SHLIB_SUFFIX=".so" + + # TEA specific: + CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer" + + # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS + SHLIB_LD='${CC} -shared ${CFLAGS} ${LDFLAGS_DEFAULT}' + LDFLAGS="$LDFLAGS -Wl,--export-dynamic" + if test $doRpath = yes; then + + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' +fi + + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + if test "`uname -m`" = "alpha"; then + CFLAGS="$CFLAGS -mieee" +fi + + if test $do64bit = yes; then + + echo "$as_me:$LINENO: checking if compiler accepts -m64 flag" >&5 +echo $ECHO_N "checking if compiler accepts -m64 flag... $ECHO_C" >&6 +if test "${tcl_cv_cc_m64+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + hold_cflags=$CFLAGS + CFLAGS="$CFLAGS -m64" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_cc_m64=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_cc_m64=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + CFLAGS=$hold_cflags +fi +echo "$as_me:$LINENO: result: $tcl_cv_cc_m64" >&5 +echo "${ECHO_T}$tcl_cv_cc_m64" >&6 + if test $tcl_cv_cc_m64 = yes; then + + CFLAGS="$CFLAGS -m64" + do64bit_ok=yes + +fi + + +fi + + + # The combo of gcc + glibc has a bug related to inlining of + # functions like strtod(). The -fno-builtin flag should address + # this problem but it does not work. The -fno-inline flag is kind + # of overkill but it works. Disable inlining only when one of the + # files in compat/*.c is being linked in. + + if test x"${USE_COMPAT}" != x; then + CFLAGS="$CFLAGS -fno-inline" +fi + + ;; + Lynx*) + SHLIB_CFLAGS="-fPIC" + SHLIB_SUFFIX=".so" + CFLAGS_OPTIMIZE=-02 + SHLIB_LD='${CC} -shared' + LD_FLAGS="-Wl,--export-dynamic" + if test $doRpath = yes; then + + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' +fi + + ;; + OpenBSD-*) + arch=`arch -s` + case "$arch" in + vax) + SHLIB_SUFFIX="" + SHARED_LIB_SUFFIX="" + LDFLAGS="" + ;; + *) + case "$arch" in + alpha|sparc64) + SHLIB_CFLAGS="-fPIC" + ;; + *) + SHLIB_CFLAGS="-fpic" + ;; + esac + SHLIB_LD='${CC} -shared ${SHLIB_CFLAGS}' + SHLIB_SUFFIX=".so" + if test $doRpath = yes; then + + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' +fi + + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so${SHLIB_VERSION}' + LDFLAGS="-Wl,-export-dynamic" + ;; + esac + case "$arch" in + vax) + CFLAGS_OPTIMIZE="-O1" + ;; + *) + CFLAGS_OPTIMIZE="-O2" + ;; + esac + if test "${TCL_THREADS}" = "1"; then + + # On OpenBSD: Compile with -pthread + # Don't link with -lpthread + LIBS=`echo $LIBS | sed s/-lpthread//` + CFLAGS="$CFLAGS -pthread" + +fi + + # OpenBSD doesn't do version numbers with dots. + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' + TCL_LIB_VERSIONS_OK=nodots + ;; + NetBSD-*) + # NetBSD has ELF and can use 'cc -shared' to build shared libs + SHLIB_CFLAGS="-fPIC" + SHLIB_LD='${CC} -shared ${SHLIB_CFLAGS}' + SHLIB_SUFFIX=".so" + LDFLAGS="$LDFLAGS -export-dynamic" + if test $doRpath = yes; then + + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' +fi + + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + if test "${TCL_THREADS}" = "1"; then + + # The -pthread needs to go in the CFLAGS, not LIBS + LIBS=`echo $LIBS | sed s/-pthread//` + CFLAGS="$CFLAGS -pthread" + LDFLAGS="$LDFLAGS -pthread" + +fi + + ;; + FreeBSD-*) + # This configuration from FreeBSD Ports. + SHLIB_CFLAGS="-fPIC" + SHLIB_LD="${CC} -shared" + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} -Wl,-soname,\$@" + SHLIB_SUFFIX=".so" + LDFLAGS="" + if test $doRpath = yes; then + + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' +fi + + if test "${TCL_THREADS}" = "1"; then + + # The -pthread needs to go in the LDFLAGS, not LIBS + LIBS=`echo $LIBS | sed s/-pthread//` + CFLAGS="$CFLAGS $PTHREAD_CFLAGS" + LDFLAGS="$LDFLAGS $PTHREAD_LIBS" +fi + + case $system in + FreeBSD-3.*) + # Version numbers are dot-stripped by system policy. + TCL_TRIM_DOTS=`echo ${PACKAGE_VERSION} | tr -d .` + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1' + TCL_LIB_VERSIONS_OK=nodots + ;; + esac + ;; + Darwin-*) + CFLAGS_OPTIMIZE="-Os" + SHLIB_CFLAGS="-fno-common" + # To avoid discrepancies between what headers configure sees during + # preprocessing tests and compiling tests, move any -isysroot and + # -mmacosx-version-min flags from CFLAGS to CPPFLAGS: + CPPFLAGS="${CPPFLAGS} `echo " ${CFLAGS}" | \ + awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \ + if ($i~/^(isysroot|mmacosx-version-min)/) print "-"$i}'`" + CFLAGS="`echo " ${CFLAGS}" | \ + awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \ + if (!($i~/^(isysroot|mmacosx-version-min)/)) print "-"$i}'`" + if test $do64bit = yes; then + + case `arch` in + ppc) + echo "$as_me:$LINENO: checking if compiler accepts -arch ppc64 flag" >&5 +echo $ECHO_N "checking if compiler accepts -arch ppc64 flag... $ECHO_C" >&6 +if test "${tcl_cv_cc_arch_ppc64+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + hold_cflags=$CFLAGS + CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_cc_arch_ppc64=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_cc_arch_ppc64=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + CFLAGS=$hold_cflags +fi +echo "$as_me:$LINENO: result: $tcl_cv_cc_arch_ppc64" >&5 +echo "${ECHO_T}$tcl_cv_cc_arch_ppc64" >&6 + if test $tcl_cv_cc_arch_ppc64 = yes; then + + CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5" + do64bit_ok=yes + +fi +;; + i386) + echo "$as_me:$LINENO: checking if compiler accepts -arch x86_64 flag" >&5 +echo $ECHO_N "checking if compiler accepts -arch x86_64 flag... $ECHO_C" >&6 +if test "${tcl_cv_cc_arch_x86_64+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + hold_cflags=$CFLAGS + CFLAGS="$CFLAGS -arch x86_64" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_cc_arch_x86_64=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_cc_arch_x86_64=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + CFLAGS=$hold_cflags +fi +echo "$as_me:$LINENO: result: $tcl_cv_cc_arch_x86_64" >&5 +echo "${ECHO_T}$tcl_cv_cc_arch_x86_64" >&6 + if test $tcl_cv_cc_arch_x86_64 = yes; then + + CFLAGS="$CFLAGS -arch x86_64" + do64bit_ok=yes + +fi +;; + *) + { echo "$as_me:$LINENO: WARNING: Don't know how enable 64-bit on architecture \`arch\`" >&5 +echo "$as_me: WARNING: Don't know how enable 64-bit on architecture \`arch\`" >&2;};; + esac + +else + + # Check for combined 32-bit and 64-bit fat build + if echo "$CFLAGS " |grep -E -q -- '-arch (ppc64|x86_64) ' \ + && echo "$CFLAGS " |grep -E -q -- '-arch (ppc|i386) '; then + + fat_32_64=yes +fi + + +fi + + # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS + SHLIB_LD='${CC} -dynamiclib ${CFLAGS} ${LDFLAGS_DEFAULT}' + echo "$as_me:$LINENO: checking if ld accepts -single_module flag" >&5 +echo $ECHO_N "checking if ld accepts -single_module flag... $ECHO_C" >&6 +if test "${tcl_cv_ld_single_module+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + hold_ldflags=$LDFLAGS + LDFLAGS="$LDFLAGS -dynamiclib -Wl,-single_module" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +int i; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_ld_single_module=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_ld_single_module=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$hold_ldflags +fi +echo "$as_me:$LINENO: result: $tcl_cv_ld_single_module" >&5 +echo "${ECHO_T}$tcl_cv_ld_single_module" >&6 + if test $tcl_cv_ld_single_module = yes; then + + SHLIB_LD="${SHLIB_LD} -Wl,-single_module" + +fi + + # TEA specific: link shlib with current and compatibility version flags + vers=`echo ${PACKAGE_VERSION} | sed -e 's/^\([0-9]\{1,5\}\)\(\(\.[0-9]\{1,3\}\)\{0,2\}\).*$/\1\2/p' -e d` + SHLIB_LD="${SHLIB_LD} -current_version ${vers:-0} -compatibility_version ${vers:-0}" + SHLIB_SUFFIX=".dylib" + # Don't use -prebind when building for Mac OS X 10.4 or later only: + if test "`echo "${MACOSX_DEPLOYMENT_TARGET}" | awk -F '10\\.' '{print int($2)}'`" -lt 4 -a \ + "`echo "${CPPFLAGS}" | awk -F '-mmacosx-version-min=10\\.' '{print int($2)}'`" -lt 4; then + + LDFLAGS="$LDFLAGS -prebind" +fi + + LDFLAGS="$LDFLAGS -headerpad_max_install_names" + echo "$as_me:$LINENO: checking if ld accepts -search_paths_first flag" >&5 +echo $ECHO_N "checking if ld accepts -search_paths_first flag... $ECHO_C" >&6 +if test "${tcl_cv_ld_search_paths_first+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + hold_ldflags=$LDFLAGS + LDFLAGS="$LDFLAGS -Wl,-search_paths_first" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +int i; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_ld_search_paths_first=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_ld_search_paths_first=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$hold_ldflags +fi +echo "$as_me:$LINENO: result: $tcl_cv_ld_search_paths_first" >&5 +echo "${ECHO_T}$tcl_cv_ld_search_paths_first" >&6 + if test $tcl_cv_ld_search_paths_first = yes; then + + LDFLAGS="$LDFLAGS -Wl,-search_paths_first" + +fi + + if test "$tcl_cv_cc_visibility_hidden" != yes; then + + +cat >>confdefs.h <<\_ACEOF +#define MODULE_SCOPE __private_extern__ +_ACEOF + + tcl_cv_cc_visibility_hidden=yes + +fi + + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + LD_LIBRARY_PATH_VAR="DYLD_LIBRARY_PATH" + # TEA specific: for combined 32 & 64 bit fat builds of Tk + # extensions, verify that 64-bit build is possible. + if test "$fat_32_64" = yes && test -n "${TK_BIN_DIR}"; then + + if test "${TEA_WINDOWINGSYSTEM}" = x11; then + + echo "$as_me:$LINENO: checking for 64-bit X11" >&5 +echo $ECHO_N "checking for 64-bit X11... $ECHO_C" >&6 +if test "${tcl_cv_lib_x11_64+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + for v in CFLAGS CPPFLAGS LDFLAGS; do + eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc / /g" -e "s/-arch i386 / /g"`"' + done + CPPFLAGS="$CPPFLAGS -I/usr/X11R6/include" + LDFLAGS="$LDFLAGS -L/usr/X11R6/lib -lX11" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +int +main () +{ +XrmInitialize(); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_lib_x11_64=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_lib_x11_64=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + for v in CFLAGS CPPFLAGS LDFLAGS; do + eval $v'="$hold_'$v'"' + done +fi +echo "$as_me:$LINENO: result: $tcl_cv_lib_x11_64" >&5 +echo "${ECHO_T}$tcl_cv_lib_x11_64" >&6 + +fi + + if test "${TEA_WINDOWINGSYSTEM}" = aqua; then + + echo "$as_me:$LINENO: checking for 64-bit Tk" >&5 +echo $ECHO_N "checking for 64-bit Tk... $ECHO_C" >&6 +if test "${tcl_cv_lib_tk_64+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + for v in CFLAGS CPPFLAGS LDFLAGS; do + eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc / /g" -e "s/-arch i386 / /g"`"' + done + CPPFLAGS="$CPPFLAGS -DUSE_TCL_STUBS=1 -DUSE_TK_STUBS=1 ${TCL_INCLUDES} ${TK_INCLUDES}" + LDFLAGS="$LDFLAGS ${TCL_STUB_LIB_SPEC} ${TK_STUB_LIB_SPEC}" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +int +main () +{ +Tk_InitStubs(NULL, "", 0); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_lib_tk_64=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_lib_tk_64=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + for v in CFLAGS CPPFLAGS LDFLAGS; do + eval $v'="$hold_'$v'"' + done +fi +echo "$as_me:$LINENO: result: $tcl_cv_lib_tk_64" >&5 +echo "${ECHO_T}$tcl_cv_lib_tk_64" >&6 + +fi + + # remove 64-bit arch flags from CFLAGS et al. if configuration + # does not support 64-bit. + if test "$tcl_cv_lib_tk_64" = no -o "$tcl_cv_lib_x11_64" = no; then + + { echo "$as_me:$LINENO: Removing 64-bit architectures from compiler & linker flags" >&5 +echo "$as_me: Removing 64-bit architectures from compiler & linker flags" >&6;} + for v in CFLAGS CPPFLAGS LDFLAGS; do + eval $v'="`echo "$'$v' "|sed -e "s/-arch ppc64 / /g" -e "s/-arch x86_64 / /g"`"' + done +fi + + +fi + + ;; + OS/390-*) + CFLAGS_OPTIMIZE="" # Optimizer is buggy + +cat >>confdefs.h <<\_ACEOF +#define _OE_SOCKETS 1 +_ACEOF + + ;; + OSF1-V*) + # Digital OSF/1 + SHLIB_CFLAGS="" + if test "$SHARED_BUILD" = 1; then + + SHLIB_LD='ld -shared -expect_unresolved "*"' + +else + + SHLIB_LD='ld -non_shared -expect_unresolved "*"' + +fi + + SHLIB_SUFFIX=".so" + if test $doRpath = yes; then + + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' +fi + + if test "$GCC" = yes; then + CFLAGS="$CFLAGS -mieee" +else + + CFLAGS="$CFLAGS -DHAVE_TZSET -std1 -ieee" +fi + + # see pthread_intro(3) for pthread support on osf1, k.furukawa + if test "${TCL_THREADS}" = 1; then + + CFLAGS="$CFLAGS -DHAVE_PTHREAD_ATTR_SETSTACKSIZE" + CFLAGS="$CFLAGS -DTCL_THREAD_STACK_MIN=PTHREAD_STACK_MIN*64" + LIBS=`echo $LIBS | sed s/-lpthreads//` + if test "$GCC" = yes; then + + LIBS="$LIBS -lpthread -lmach -lexc" + +else + + CFLAGS="$CFLAGS -pthread" + LDFLAGS="$LDFLAGS -pthread" + +fi + + +fi + + ;; + QNX-6*) + # QNX RTP + # This may work for all QNX, but it was only reported for v6. + SHLIB_CFLAGS="-fPIC" + SHLIB_LD="ld -Bshareable -x" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + SCO_SV-3.2*) + if test "$GCC" = yes; then + + SHLIB_CFLAGS="-fPIC -melf" + LDFLAGS="$LDFLAGS -melf -Wl,-Bexport" + +else + + SHLIB_CFLAGS="-Kpic -belf" + LDFLAGS="$LDFLAGS -belf -Wl,-Bexport" + +fi + + SHLIB_LD="ld -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + SunOS-5.[0-6]) + # Careful to not let 5.10+ fall into this case + + # Note: If _REENTRANT isn't defined, then Solaris + # won't define thread-safe library routines. + + +cat >>confdefs.h <<\_ACEOF +#define _REENTRANT 1 +_ACEOF + + +cat >>confdefs.h <<\_ACEOF +#define _POSIX_PTHREAD_SEMANTICS 1 +_ACEOF + + + SHLIB_CFLAGS="-KPIC" + SHLIB_SUFFIX=".so" + if test "$GCC" = yes; then + + SHLIB_LD='${CC} -shared' + CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + +else + + SHLIB_LD="/usr/ccs/bin/ld -G -z text" + CC_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + +fi + + ;; + SunOS-5*) + # Note: If _REENTRANT isn't defined, then Solaris + # won't define thread-safe library routines. + + +cat >>confdefs.h <<\_ACEOF +#define _REENTRANT 1 +_ACEOF + + +cat >>confdefs.h <<\_ACEOF +#define _POSIX_PTHREAD_SEMANTICS 1 +_ACEOF + + + SHLIB_CFLAGS="-KPIC" + + # Check to enable 64-bit flags for compiler/linker + if test "$do64bit" = yes; then + + arch=`isainfo` + if test "$arch" = "sparcv9 sparc"; then + + if test "$GCC" = yes; then + + if test "`${CC} -dumpversion | awk -F. '{print $1}'`" -lt 3; then + + { echo "$as_me:$LINENO: WARNING: 64bit mode not supported with GCC < 3.2 on $system" >&5 +echo "$as_me: WARNING: 64bit mode not supported with GCC < 3.2 on $system" >&2;} + +else + + do64bit_ok=yes + CFLAGS="$CFLAGS -m64 -mcpu=v9" + LDFLAGS="$LDFLAGS -m64 -mcpu=v9" + SHLIB_CFLAGS="-fPIC" + +fi + + +else + + do64bit_ok=yes + if test "$do64bitVIS" = yes; then + + CFLAGS="$CFLAGS -xarch=v9a" + LDFLAGS_ARCH="-xarch=v9a" + +else + + CFLAGS="$CFLAGS -xarch=v9" + LDFLAGS_ARCH="-xarch=v9" + +fi + + # Solaris 64 uses this as well + #LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH_64" + +fi + + +else + if test "$arch" = "amd64 i386"; then + + if test "$GCC" = yes; then + + case $system in + SunOS-5.1[1-9]*|SunOS-5.[2-9][0-9]*) + do64bit_ok=yes + CFLAGS="$CFLAGS -m64" + LDFLAGS="$LDFLAGS -m64";; + *) + { echo "$as_me:$LINENO: WARNING: 64bit mode not supported with GCC on $system" >&5 +echo "$as_me: WARNING: 64bit mode not supported with GCC on $system" >&2;};; + esac + +else + + do64bit_ok=yes + case $system in + SunOS-5.1[1-9]*|SunOS-5.[2-9][0-9]*) + CFLAGS="$CFLAGS -m64" + LDFLAGS="$LDFLAGS -m64";; + *) + CFLAGS="$CFLAGS -xarch=amd64" + LDFLAGS="$LDFLAGS -xarch=amd64";; + esac + +fi + + +else + { echo "$as_me:$LINENO: WARNING: 64bit mode not supported for $arch" >&5 +echo "$as_me: WARNING: 64bit mode not supported for $arch" >&2;} +fi + +fi + + +fi + + + SHLIB_SUFFIX=".so" + if test "$GCC" = yes; then + + SHLIB_LD='${CC} -shared' + CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + if test "$do64bit_ok" = yes; then + + if test "$arch" = "sparcv9 sparc"; then + + # We need to specify -static-libgcc or we need to + # add the path to the sparv9 libgcc. + # JH: static-libgcc is necessary for core Tcl, but may + # not be necessary for extensions. + SHLIB_LD="$SHLIB_LD -m64 -mcpu=v9 -static-libgcc" + # for finding sparcv9 libgcc, get the regular libgcc + # path, remove so name and append 'sparcv9' + #v9gcclibdir="`gcc -print-file-name=libgcc_s.so` | ..." + #CC_SEARCH_FLAGS="${CC_SEARCH_FLAGS},-R,$v9gcclibdir" + +else + if test "$arch" = "amd64 i386"; then + + # JH: static-libgcc is necessary for core Tcl, but may + # not be necessary for extensions. + SHLIB_LD="$SHLIB_LD -m64 -static-libgcc" + +fi + +fi + + +fi + + +else + + case $system in + SunOS-5.[1-9][0-9]*) + # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS + SHLIB_LD='${CC} -G -z text ${LDFLAGS_DEFAULT}';; + *) + SHLIB_LD='/usr/ccs/bin/ld -G -z text';; + esac + CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' + +fi + + ;; + UNIX_SV* | UnixWare-5*) + SHLIB_CFLAGS="-KPIC" + SHLIB_LD='${CC} -G' + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + # Some UNIX_SV* systems (unixware 1.1.2 for example) have linkers + # that don't grok the -Bexport option. Test that it does. + echo "$as_me:$LINENO: checking for ld accepts -Bexport flag" >&5 +echo $ECHO_N "checking for ld accepts -Bexport flag... $ECHO_C" >&6 +if test "${tcl_cv_ld_Bexport+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + hold_ldflags=$LDFLAGS + LDFLAGS="$LDFLAGS -Wl,-Bexport" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +int i; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_ld_Bexport=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_ld_Bexport=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$hold_ldflags +fi +echo "$as_me:$LINENO: result: $tcl_cv_ld_Bexport" >&5 +echo "${ECHO_T}$tcl_cv_ld_Bexport" >&6 + if test $tcl_cv_ld_Bexport = yes; then + + LDFLAGS="$LDFLAGS -Wl,-Bexport" + +fi + + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + esac + + if test "$do64bit" = yes -a "$do64bit_ok" = no; then + + { echo "$as_me:$LINENO: WARNING: 64bit support being disabled -- don't know magic for this platform" >&5 +echo "$as_me: WARNING: 64bit support being disabled -- don't know magic for this platform" >&2;} + +fi + + + + + # Add in the arch flags late to ensure it wasn't removed. + # Not necessary in TEA, but this is aligned with core + LDFLAGS="$LDFLAGS $LDFLAGS_ARCH" + + # If we're running gcc, then change the C flags for compiling shared + # libraries to the right flags for gcc, instead of those for the + # standard manufacturer compiler. + + if test "$GCC" = yes; then + + case $system in + AIX-*) ;; + BSD/OS*) ;; + CYGWIN_*|MINGW32_*) ;; + IRIX*) ;; + NetBSD-*|FreeBSD-*|OpenBSD-*) ;; + Darwin-*) ;; + SCO_SV-3.2*) ;; + windows) ;; + *) SHLIB_CFLAGS="-fPIC" ;; + esac +fi + + + if test "$tcl_cv_cc_visibility_hidden" != yes; then + + +cat >>confdefs.h <<\_ACEOF +#define MODULE_SCOPE extern +_ACEOF + + +fi + + + if test "$SHARED_LIB_SUFFIX" = ""; then + + # TEA specific: use PACKAGE_VERSION instead of VERSION + SHARED_LIB_SUFFIX='${PACKAGE_VERSION}${SHLIB_SUFFIX}' +fi + + if test "$UNSHARED_LIB_SUFFIX" = ""; then + + # TEA specific: use PACKAGE_VERSION instead of VERSION + UNSHARED_LIB_SUFFIX='${PACKAGE_VERSION}.a' +fi + + + if test "${GCC}" = "yes" -a ${SHLIB_SUFFIX} = ".dll"; then + echo "$as_me:$LINENO: checking for SEH support in compiler" >&5 +echo $ECHO_N "checking for SEH support in compiler... $ECHO_C" >&6 +if test "${tcl_cv_seh+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "$cross_compiling" = yes; then + tcl_cv_seh=no +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +#define WIN32_LEAN_AND_MEAN +#include +#undef WIN32_LEAN_AND_MEAN + + int main(int argc, char** argv) { + int a, b = 0; + __try { + a = 666 / b; + } + __except (EXCEPTION_EXECUTE_HANDLER) { + return 0; + } + return 1; + } + +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_seh=yes +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +tcl_cv_seh=no +fi +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi + +fi +echo "$as_me:$LINENO: result: $tcl_cv_seh" >&5 +echo "${ECHO_T}$tcl_cv_seh" >&6 + if test "$tcl_cv_seh" = "no" ; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_NO_SEH 1 +_ACEOF + + fi + + # + # Check to see if the excpt.h include file provided contains the + # definition for EXCEPTION_DISPOSITION; if not, which is the case + # with Cygwin's version as of 2002-04-10, define it to be int, + # sufficient for getting the current code to work. + # + echo "$as_me:$LINENO: checking for EXCEPTION_DISPOSITION support in include files" >&5 +echo $ECHO_N "checking for EXCEPTION_DISPOSITION support in include files... $ECHO_C" >&6 +if test "${tcl_cv_eh_disposition+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +# define WIN32_LEAN_AND_MEAN +# include +# undef WIN32_LEAN_AND_MEAN + +int +main () +{ + + EXCEPTION_DISPOSITION x; + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_eh_disposition=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_eh_disposition=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +fi +echo "$as_me:$LINENO: result: $tcl_cv_eh_disposition" >&5 +echo "${ECHO_T}$tcl_cv_eh_disposition" >&6 + if test "$tcl_cv_eh_disposition" = "no" ; then + +cat >>confdefs.h <<\_ACEOF +#define EXCEPTION_DISPOSITION int +_ACEOF + + fi + + # Check to see if winnt.h defines CHAR, SHORT, and LONG + # even if VOID has already been #defined. The win32api + # used by mingw and cygwin is known to do this. + + echo "$as_me:$LINENO: checking for winnt.h that ignores VOID define" >&5 +echo $ECHO_N "checking for winnt.h that ignores VOID define... $ECHO_C" >&6 +if test "${tcl_cv_winnt_ignore_void+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +#define VOID void +#define WIN32_LEAN_AND_MEAN +#include +#undef WIN32_LEAN_AND_MEAN + +int +main () +{ + + CHAR c; + SHORT s; + LONG l; + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_winnt_ignore_void=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_winnt_ignore_void=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +fi +echo "$as_me:$LINENO: result: $tcl_cv_winnt_ignore_void" >&5 +echo "${ECHO_T}$tcl_cv_winnt_ignore_void" >&6 + if test "$tcl_cv_winnt_ignore_void" = "yes" ; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_WINNT_IGNORE_VOID 1 +_ACEOF + + fi + fi + + # See if the compiler supports casting to a union type. + # This is used to stop gcc from printing a compiler + # warning when initializing a union member. + + echo "$as_me:$LINENO: checking for cast to union support" >&5 +echo $ECHO_N "checking for cast to union support... $ECHO_C" >&6 +if test "${tcl_cv_cast_to_union+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + union foo { int i; double d; }; + union foo f = (union foo) (int) 0; + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_cast_to_union=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_cast_to_union=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +fi +echo "$as_me:$LINENO: result: $tcl_cv_cast_to_union" >&5 +echo "${ECHO_T}$tcl_cv_cast_to_union" >&6 + if test "$tcl_cv_cast_to_union" = "yes"; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_CAST_TO_UNION 1 +_ACEOF + + fi + + + + + + + + + + + + + + # These must be called after we do the basic CFLAGS checks and + # verify any possible 64-bit or similar switches are necessary + + echo "$as_me:$LINENO: checking for required early compiler flags" >&5 +echo $ECHO_N "checking for required early compiler flags... $ECHO_C" >&6 + tcl_flags="" + + if test "${tcl_cv_flag__isoc99_source+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +int +main () +{ +char *p = (char *)strtoll; char *q = (char *)strtoull; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_flag__isoc99_source=no +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#define _ISOC99_SOURCE 1 +#include +int +main () +{ +char *p = (char *)strtoll; char *q = (char *)strtoull; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_flag__isoc99_source=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_flag__isoc99_source=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi + + if test "x${tcl_cv_flag__isoc99_source}" = "xyes" ; then + +cat >>confdefs.h <<\_ACEOF +#define _ISOC99_SOURCE 1 +_ACEOF + + tcl_flags="$tcl_flags _ISOC99_SOURCE" + fi + + + if test "${tcl_cv_flag__largefile64_source+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +int +main () +{ +struct stat64 buf; int i = stat64("/", &buf); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_flag__largefile64_source=no +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#define _LARGEFILE64_SOURCE 1 +#include +int +main () +{ +struct stat64 buf; int i = stat64("/", &buf); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_flag__largefile64_source=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_flag__largefile64_source=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi + + if test "x${tcl_cv_flag__largefile64_source}" = "xyes" ; then + +cat >>confdefs.h <<\_ACEOF +#define _LARGEFILE64_SOURCE 1 +_ACEOF + + tcl_flags="$tcl_flags _LARGEFILE64_SOURCE" + fi + + + if test "${tcl_cv_flag__largefile_source64+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +int +main () +{ +char *p = (char *)open64; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_flag__largefile_source64=no +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#define _LARGEFILE_SOURCE64 1 +#include +int +main () +{ +char *p = (char *)open64; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_flag__largefile_source64=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_flag__largefile_source64=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi + + if test "x${tcl_cv_flag__largefile_source64}" = "xyes" ; then + +cat >>confdefs.h <<\_ACEOF +#define _LARGEFILE_SOURCE64 1 +_ACEOF + + tcl_flags="$tcl_flags _LARGEFILE_SOURCE64" + fi + + if test "x${tcl_flags}" = "x" ; then + echo "$as_me:$LINENO: result: none" >&5 +echo "${ECHO_T}none" >&6 + else + echo "$as_me:$LINENO: result: ${tcl_flags}" >&5 +echo "${ECHO_T}${tcl_flags}" >&6 + fi + + + echo "$as_me:$LINENO: checking for 64-bit integer type" >&5 +echo $ECHO_N "checking for 64-bit integer type... $ECHO_C" >&6 + if test "${tcl_cv_type_64bit+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + tcl_cv_type_64bit=none + # See if the compiler knows natively about __int64 + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +__int64 value = (__int64) 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_type_64bit=__int64 +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_type_64bit="long long" +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + # See if we should use long anyway Note that we substitute in the + # type that is our current guess for a 64-bit type inside this check + # program, so it should be modified only carefully... + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +switch (0) { + case 1: case (sizeof(${tcl_type_64bit})==sizeof(long)): ; + } + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_type_64bit=${tcl_type_64bit} +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi + + if test "${tcl_cv_type_64bit}" = none ; then + +cat >>confdefs.h <<\_ACEOF +#define TCL_WIDE_INT_IS_LONG 1 +_ACEOF + + echo "$as_me:$LINENO: result: using long" >&5 +echo "${ECHO_T}using long" >&6 + elif test "${tcl_cv_type_64bit}" = "__int64" \ + -a "${TEA_PLATFORM}" = "windows" ; then + # TEA specific: We actually want to use the default tcl.h checks in + # this case to handle both TCL_WIDE_INT_TYPE and TCL_LL_MODIFIER* + echo "$as_me:$LINENO: result: using Tcl header defaults" >&5 +echo "${ECHO_T}using Tcl header defaults" >&6 + else + +cat >>confdefs.h <<_ACEOF +#define TCL_WIDE_INT_TYPE ${tcl_cv_type_64bit} +_ACEOF + + echo "$as_me:$LINENO: result: ${tcl_cv_type_64bit}" >&5 +echo "${ECHO_T}${tcl_cv_type_64bit}" >&6 + + # Now check for auxiliary declarations + echo "$as_me:$LINENO: checking for struct dirent64" >&5 +echo $ECHO_N "checking for struct dirent64... $ECHO_C" >&6 +if test "${tcl_cv_struct_dirent64+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +int +main () +{ +struct dirent64 p; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_struct_dirent64=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_struct_dirent64=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $tcl_cv_struct_dirent64" >&5 +echo "${ECHO_T}$tcl_cv_struct_dirent64" >&6 + if test "x${tcl_cv_struct_dirent64}" = "xyes" ; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_STRUCT_DIRENT64 1 +_ACEOF + + fi + + echo "$as_me:$LINENO: checking for struct stat64" >&5 +echo $ECHO_N "checking for struct stat64... $ECHO_C" >&6 +if test "${tcl_cv_struct_stat64+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +int +main () +{ +struct stat64 p; + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_struct_stat64=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_struct_stat64=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $tcl_cv_struct_stat64" >&5 +echo "${ECHO_T}$tcl_cv_struct_stat64" >&6 + if test "x${tcl_cv_struct_stat64}" = "xyes" ; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_STRUCT_STAT64 1 +_ACEOF + + fi + + + +for ac_func in open64 lseek64 +do +as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_func" >&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +if eval "test \"\${$as_ac_var+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case declares $ac_func. + For example, HP-UX 11i declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $ac_func + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +choke me +#else +char (*f) () = $ac_func; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != $ac_func; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_var=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_var=no" +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 +if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + + echo "$as_me:$LINENO: checking for off64_t" >&5 +echo $ECHO_N "checking for off64_t... $ECHO_C" >&6 + if test "${tcl_cv_type_off64_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +int +main () +{ +off64_t offset; + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_type_off64_t=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_type_off64_t=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi + + if test "x${tcl_cv_type_off64_t}" = "xyes" && \ + test "x${ac_cv_func_lseek64}" = "xyes" && \ + test "x${ac_cv_func_open64}" = "xyes" ; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_TYPE_OFF64_T 1 +_ACEOF + + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 + fi + fi + + + +#-------------------------------------------------------------------- +# Set the default compiler switches based on the --enable-symbols option. +#-------------------------------------------------------------------- + + + + echo "$as_me:$LINENO: checking for build with symbols" >&5 +echo $ECHO_N "checking for build with symbols... $ECHO_C" >&6 + # Check whether --enable-symbols or --disable-symbols was given. +if test "${enable_symbols+set}" = set; then + enableval="$enable_symbols" + tcl_ok=$enableval +else + tcl_ok=no +fi; + DBGX="" + if test "$tcl_ok" = "no"; then + CFLAGS_DEFAULT="${CFLAGS_OPTIMIZE} -DNDEBUG" + LDFLAGS_DEFAULT="${LDFLAGS_OPTIMIZE}" + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 + else + CFLAGS_DEFAULT="${CFLAGS_DEBUG}" + LDFLAGS_DEFAULT="${LDFLAGS_DEBUG}" + if test "$tcl_ok" = "yes"; then + echo "$as_me:$LINENO: result: yes (standard debugging)" >&5 +echo "${ECHO_T}yes (standard debugging)" >&6 + fi + fi + # TEA specific: + if test "${TEA_PLATFORM}" != "windows" ; then + LDFLAGS_DEFAULT="${LDFLAGS}" + fi + + + + + if test "$tcl_ok" = "mem" -o "$tcl_ok" = "all"; then + +cat >>confdefs.h <<\_ACEOF +#define TCL_MEM_DEBUG 1 +_ACEOF + + fi + + if test "$tcl_ok" != "yes" -a "$tcl_ok" != "no"; then + if test "$tcl_ok" = "all"; then + echo "$as_me:$LINENO: result: enabled symbols mem debugging" >&5 +echo "${ECHO_T}enabled symbols mem debugging" >&6 + else + echo "$as_me:$LINENO: result: enabled $tcl_ok debugging" >&5 +echo "${ECHO_T}enabled $tcl_ok debugging" >&6 + fi + fi + + +#-------------------------------------------------------------------- +# For Unix/Tk builds, make sure that the X libraries/headers are found. +# This must be called after TEA_CONFIG_CFLAGS as it adjusts LIBS. +#-------------------------------------------------------------------- + + + if test "${TEA_WINDOWINGSYSTEM}" = "x11" ; then + + echo "$as_me:$LINENO: checking for X" >&5 +echo $ECHO_N "checking for X... $ECHO_C" >&6 + + +# Check whether --with-x or --without-x was given. +if test "${with_x+set}" = set; then + withval="$with_x" + +fi; +# $have_x is `yes', `no', `disabled', or empty when we do not yet know. +if test "x$with_x" = xno; then + # The user explicitly disabled X. + have_x=disabled +else + if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then + # Both variables are already set. + have_x=yes + else + if test "${ac_cv_have_x+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + # One or both of the vars are not set, and there is no cached value. +ac_x_includes=no ac_x_libraries=no +rm -fr conftest.dir +if mkdir conftest.dir; then + cd conftest.dir + # Make sure to not put "make" in the Imakefile rules, since we grep it out. + cat >Imakefile <<'_ACEOF' +acfindx: + @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"' +_ACEOF + if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then + # GNU make sometimes prints "make[1]: Entering...", which would confuse us. + eval `${MAKE-make} acfindx 2>/dev/null | grep -v make` + # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR. + for ac_extension in a so sl; do + if test ! -f $ac_im_usrlibdir/libX11.$ac_extension && + test -f $ac_im_libdir/libX11.$ac_extension; then + ac_im_usrlibdir=$ac_im_libdir; break + fi + done + # Screen out bogus values from the imake configuration. They are + # bogus both because they are the default anyway, and because + # using them would break gcc on systems where it needs fixed includes. + case $ac_im_incroot in + /usr/include) ;; + *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;; + esac + case $ac_im_usrlibdir in + /usr/lib | /lib) ;; + *) test -d "$ac_im_usrlibdir" && ac_x_libraries=$ac_im_usrlibdir ;; + esac + fi + cd .. + rm -fr conftest.dir +fi + +# Standard set of common directories for X headers. +# Check X11 before X11Rn because it is often a symlink to the current release. +ac_x_header_dirs=' +/usr/X11/include +/usr/X11R6/include +/usr/X11R5/include +/usr/X11R4/include + +/usr/include/X11 +/usr/include/X11R6 +/usr/include/X11R5 +/usr/include/X11R4 + +/usr/local/X11/include +/usr/local/X11R6/include +/usr/local/X11R5/include +/usr/local/X11R4/include + +/usr/local/include/X11 +/usr/local/include/X11R6 +/usr/local/include/X11R5 +/usr/local/include/X11R4 + +/usr/X386/include +/usr/x386/include +/usr/XFree86/include/X11 + +/usr/include +/usr/local/include +/usr/unsupported/include +/usr/athena/include +/usr/local/x11r5/include +/usr/lpp/Xamples/include + +/usr/openwin/include +/usr/openwin/share/include' + +if test "$ac_x_includes" = no; then + # Guess where to find include files, by looking for Xlib.h. + # First, try using that file with no special directory specified. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + # We can compile using X headers with no special include directory. +ac_x_includes= +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + for ac_dir in $ac_x_header_dirs; do + if test -r "$ac_dir/X11/Xlib.h"; then + ac_x_includes=$ac_dir + break + fi +done +fi +rm -f conftest.err conftest.$ac_ext +fi # $ac_x_includes = no + +if test "$ac_x_libraries" = no; then + # Check for the libraries. + # See if we find them without any special options. + # Don't add to $LIBS permanently. + ac_save_LIBS=$LIBS + LIBS="-lX11 $LIBS" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +int +main () +{ +XrmInitialize(); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + LIBS=$ac_save_LIBS +# We can link X programs with no special library path. +ac_x_libraries= +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +LIBS=$ac_save_LIBS +for ac_dir in `echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g` +do + # Don't even attempt the hair of trying to link an X program! + for ac_extension in a so sl; do + if test -r $ac_dir/libXt.$ac_extension; then + ac_x_libraries=$ac_dir + break 2 + fi + done +done +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi # $ac_x_libraries = no + +if test "$ac_x_includes" = no || test "$ac_x_libraries" = no; then + # Didn't find X anywhere. Cache the known absence of X. + ac_cv_have_x="have_x=no" +else + # Record where we found X for the cache. + ac_cv_have_x="have_x=yes \ + ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries" +fi +fi + + fi + eval "$ac_cv_have_x" +fi # $with_x != no + +if test "$have_x" != yes; then + echo "$as_me:$LINENO: result: $have_x" >&5 +echo "${ECHO_T}$have_x" >&6 + no_x=yes +else + # If each of the values was on the command line, it overrides each guess. + test "x$x_includes" = xNONE && x_includes=$ac_x_includes + test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries + # Update the cache value to reflect the command line values. + ac_cv_have_x="have_x=yes \ + ac_x_includes=$x_includes ac_x_libraries=$x_libraries" + echo "$as_me:$LINENO: result: libraries $x_libraries, headers $x_includes" >&5 +echo "${ECHO_T}libraries $x_libraries, headers $x_includes" >&6 +fi + + not_really_there="" + if test "$no_x" = ""; then + if test "$x_includes" = ""; then + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + not_really_there="yes" +fi +rm -f conftest.err conftest.$ac_ext + else + if test ! -r $x_includes/X11/Xlib.h; then + not_really_there="yes" + fi + fi + fi + if test "$no_x" = "yes" -o "$not_really_there" = "yes"; then + echo "$as_me:$LINENO: checking for X11 header files" >&5 +echo $ECHO_N "checking for X11 header files... $ECHO_C" >&6 + found_xincludes="no" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + found_xincludes="yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + found_xincludes="no" +fi +rm -f conftest.err conftest.$ac_ext + if test "$found_xincludes" = "no"; then + dirs="/usr/unsupported/include /usr/local/include /usr/X386/include /usr/X11R6/include /usr/X11R5/include /usr/include/X11R5 /usr/include/X11R4 /usr/openwin/include /usr/X11/include /usr/sww/include" + for i in $dirs ; do + if test -r $i/X11/Xlib.h; then + echo "$as_me:$LINENO: result: $i" >&5 +echo "${ECHO_T}$i" >&6 + XINCLUDES=" -I$i" + found_xincludes="yes" + break + fi + done + fi + else + if test "$x_includes" != ""; then + XINCLUDES="-I$x_includes" + found_xincludes="yes" + fi + fi + if test "$found_xincludes" = "no"; then + echo "$as_me:$LINENO: result: couldn't find any!" >&5 +echo "${ECHO_T}couldn't find any!" >&6 + fi + + if test "$no_x" = yes; then + echo "$as_me:$LINENO: checking for X11 libraries" >&5 +echo $ECHO_N "checking for X11 libraries... $ECHO_C" >&6 + XLIBSW=nope + dirs="/usr/unsupported/lib /usr/local/lib /usr/X386/lib /usr/X11R6/lib /usr/X11R5/lib /usr/lib/X11R5 /usr/lib/X11R4 /usr/openwin/lib /usr/X11/lib /usr/sww/X11/lib" + for i in $dirs ; do + if test -r $i/libX11.a -o -r $i/libX11.so -o -r $i/libX11.sl -o -r $i/libX11.dylib; then + echo "$as_me:$LINENO: result: $i" >&5 +echo "${ECHO_T}$i" >&6 + XLIBSW="-L$i -lX11" + x_libraries="$i" + break + fi + done + else + if test "$x_libraries" = ""; then + XLIBSW=-lX11 + else + XLIBSW="-L$x_libraries -lX11" + fi + fi + if test "$XLIBSW" = nope ; then + echo "$as_me:$LINENO: checking for XCreateWindow in -lXwindow" >&5 +echo $ECHO_N "checking for XCreateWindow in -lXwindow... $ECHO_C" >&6 +if test "${ac_cv_lib_Xwindow_XCreateWindow+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lXwindow $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char XCreateWindow (); +int +main () +{ +XCreateWindow (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_Xwindow_XCreateWindow=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_Xwindow_XCreateWindow=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_Xwindow_XCreateWindow" >&5 +echo "${ECHO_T}$ac_cv_lib_Xwindow_XCreateWindow" >&6 +if test $ac_cv_lib_Xwindow_XCreateWindow = yes; then + XLIBSW=-lXwindow +fi + + fi + if test "$XLIBSW" = nope ; then + echo "$as_me:$LINENO: result: could not find any! Using -lX11." >&5 +echo "${ECHO_T}could not find any! Using -lX11." >&6 + XLIBSW=-lX11 + fi + # TEA specific: + if test x"${XLIBSW}" != x ; then + PKG_LIBS="${PKG_LIBS} ${XLIBSW}" + fi + + fi + + +#-------------------------------------------------------------------- +# Everyone should be linking against the Tcl stub library. If you +# can't for some reason, remove this definition. If you aren't using +# stubs, you also need to modify the SHLIB_LD_LIBS setting below to +# link against the non-stubbed Tcl library. +#-------------------------------------------------------------------- + +cat >>confdefs.h <<\_ACEOF +#define USE_TCL_STUBS 1 +_ACEOF + +cat >>confdefs.h <<\_ACEOF +#define USE_TK_STUBS 1 +_ACEOF + + +#-------------------------------------------------------------------- +# This macro generates a line to use when building a library. It +# depends on values set by the TEA_ENABLE_SHARED, TEA_ENABLE_SYMBOLS, +# and TEA_LOAD_TCLCONFIG macros above. +#-------------------------------------------------------------------- + + + if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes"; then + MAKE_STATIC_LIB="\${STLIB_LD} -out:\$@ \$(PKG_OBJECTS)" + MAKE_SHARED_LIB="\${SHLIB_LD} \${SHLIB_LD_LIBS} \${LDFLAGS_DEFAULT} -out:\$@ \$(PKG_OBJECTS)" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +#if defined(_MSC_VER) && _MSC_VER >= 1400 +print("manifest needed") +#endif + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "manifest needed" >/dev/null 2>&1; then + + # Could do a CHECK_PROG for mt, but should always be with MSVC8+ + VC_MANIFEST_EMBED_DLL="if test -f \$@.manifest ; then mt.exe -nologo -manifest \$@.manifest -outputresource:\$@\;2 ; fi" + VC_MANIFEST_EMBED_EXE="if test -f \$@.manifest ; then mt.exe -nologo -manifest \$@.manifest -outputresource:\$@\;1 ; fi" + MAKE_SHARED_LIB="${MAKE_SHARED_LIB} ; ${VC_MANIFEST_EMBED_DLL}" + + CLEANFILES="$CLEANFILES *.manifest" + + +fi +rm -f conftest* + + MAKE_STUB_LIB="\${STLIB_LD} -nodefaultlib -out:\$@ \$(PKG_STUB_OBJECTS)" + else + MAKE_STATIC_LIB="\${STLIB_LD} \$@ \$(PKG_OBJECTS)" + MAKE_SHARED_LIB="\${SHLIB_LD} -o \$@ \$(PKG_OBJECTS) \${SHLIB_LD_LIBS}" + MAKE_STUB_LIB="\${STLIB_LD} \$@ \$(PKG_STUB_OBJECTS)" + fi + + if test "${SHARED_BUILD}" = "1" ; then + MAKE_LIB="${MAKE_SHARED_LIB} " + else + MAKE_LIB="${MAKE_STATIC_LIB} " + fi + + #-------------------------------------------------------------------- + # Shared libraries and static libraries have different names. + # Use the double eval to make sure any variables in the suffix is + # substituted. (@@@ Might not be necessary anymore) + #-------------------------------------------------------------------- + + if test "${TEA_PLATFORM}" = "windows" ; then + if test "${SHARED_BUILD}" = "1" ; then + # We force the unresolved linking of symbols that are really in + # the private libraries of Tcl and Tk. + if test x"${TK_BIN_DIR}" != x ; then + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TK_BIN_DIR}/${TK_STUB_LIB_FILE}`\"" + fi + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}`\"" + if test "$GCC" = "yes"; then + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} -static-libgcc" + fi + eval eval "PKG_LIB_FILE=${PACKAGE_LIB_PREFIX}${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" + else + eval eval "PKG_LIB_FILE=${PACKAGE_LIB_PREFIX}${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" + if test "$GCC" = "yes"; then + PKG_LIB_FILE=lib${PKG_LIB_FILE} + fi + fi + # Some packages build their own stubs libraries + eval eval "PKG_STUB_LIB_FILE=${PACKAGE_LIB_PREFIX}${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}" + if test "$GCC" = "yes"; then + PKG_STUB_LIB_FILE=lib${PKG_STUB_LIB_FILE} + fi + # These aren't needed on Windows (either MSVC or gcc) + RANLIB=: + RANLIB_STUB=: + else + RANLIB_STUB="${RANLIB}" + if test "${SHARED_BUILD}" = "1" ; then + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TCL_STUB_LIB_SPEC}" + if test x"${TK_BIN_DIR}" != x ; then + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TK_STUB_LIB_SPEC}" + fi + eval eval "PKG_LIB_FILE=lib${PACKAGE_LIB_PREFIX}${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" + RANLIB=: + else + eval eval "PKG_LIB_FILE=lib${PACKAGE_LIB_PREFIX}${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" + fi + # Some packages build their own stubs libraries + eval eval "PKG_STUB_LIB_FILE=lib${PACKAGE_LIB_PREFIX}${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}" + fi + + # These are escaped so that only CFLAGS is picked up at configure time. + # The other values will be substituted at make time. + CFLAGS="${CFLAGS} \${CFLAGS_DEFAULT} \${CFLAGS_WARNING}" + if test "${SHARED_BUILD}" = "1" ; then + CFLAGS="${CFLAGS} \${SHLIB_CFLAGS}" + fi + + + + + + + + + + +#-------------------------------------------------------------------- +# __CHANGE__ +# Add platform libs to LIBS or SHLIB_LD_LIBS as necessary. +#-------------------------------------------------------------------- + +if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes" ; then + + vars="\"`${CYGPATH} ${tkimg_STUB_LIB_PATH}`\"" + for i in $vars; do + if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then + # Convert foo.lib to -lfoo for GCC. No-op if not *.lib + i=`echo "$i" | sed -e 's/^\([^-].*\)\.lib$/-l\1/i'` + fi + PKG_LIBS="$PKG_LIBS $i" + done + + +else + + vars="${tkimg_STUB_LIB_SPEC}" + for i in $vars; do + if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then + # Convert foo.lib to -lfoo for GCC. No-op if not *.lib + i=`echo "$i" | sed -e 's/^\([^-].*\)\.lib$/-l\1/i'` + fi + PKG_LIBS="$PKG_LIBS $i" + done + + +fi + +#-------------------------------------------------------------------- +# Find tclsh so that we can run pkg_mkIndex to generate the pkgIndex.tcl +# file during the install process. Don't run the TCLSH_PROG through +# ${CYGPATH} because it's being used directly by make. +# Require that we use a tclsh shell version 8.2 or later since earlier +# versions have bugs in the pkg_mkIndex routine. +# Add WISH as well if this is a Tk extension. +#-------------------------------------------------------------------- + + + echo "$as_me:$LINENO: checking for tclsh" >&5 +echo $ECHO_N "checking for tclsh... $ECHO_C" >&6 + if test -f "${TCL_BIN_DIR}/Makefile" ; then + # tclConfig.sh is in Tcl build directory + if test "${TEA_PLATFORM}" = "windows"; then + TCLSH_PROG="${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}" + else + TCLSH_PROG="${TCL_BIN_DIR}/tclsh" + fi + else + # tclConfig.sh is in install location + if test "${TEA_PLATFORM}" = "windows"; then + TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}" + else + TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}.${TCL_MINOR_VERSION}${TCL_DBGX}" + fi + list="`ls -d ${TCL_BIN_DIR}/../bin 2>/dev/null` \ + `ls -d ${TCL_BIN_DIR}/.. 2>/dev/null` \ + `ls -d ${TCL_PREFIX}/bin 2>/dev/null`" + for i in $list ; do + if test -f "$i/${TCLSH_PROG}" ; then + REAL_TCL_BIN_DIR="`cd "$i"; pwd`/" + break + fi + done + TCLSH_PROG="${REAL_TCL_BIN_DIR}${TCLSH_PROG}" + fi + echo "$as_me:$LINENO: result: ${TCLSH_PROG}" >&5 +echo "${ECHO_T}${TCLSH_PROG}" >&6 + + + + echo "$as_me:$LINENO: checking for wish" >&5 +echo $ECHO_N "checking for wish... $ECHO_C" >&6 + if test -f "${TK_BIN_DIR}/Makefile" ; then + # tkConfig.sh is in Tk build directory + if test "${TEA_PLATFORM}" = "windows"; then + WISH_PROG="${TK_BIN_DIR}/wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}${EXEEXT}" + else + WISH_PROG="${TK_BIN_DIR}/wish" + fi + else + # tkConfig.sh is in install location + if test "${TEA_PLATFORM}" = "windows"; then + WISH_PROG="wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}${EXEEXT}" + else + WISH_PROG="wish${TK_MAJOR_VERSION}.${TK_MINOR_VERSION}${TK_DBGX}" + fi + list="`ls -d ${TK_BIN_DIR}/../bin 2>/dev/null` \ + `ls -d ${TK_BIN_DIR}/.. 2>/dev/null` \ + `ls -d ${TK_PREFIX}/bin 2>/dev/null`" + for i in $list ; do + if test -f "$i/${WISH_PROG}" ; then + REAL_TK_BIN_DIR="`cd "$i"; pwd`/" + break + fi + done + WISH_PROG="${REAL_TK_BIN_DIR}${WISH_PROG}" + fi + echo "$as_me:$LINENO: result: ${WISH_PROG}" >&5 +echo "${ECHO_T}${WISH_PROG}" >&6 + + + +#-------------------------------------------------------------------- +# Finally, substitute all of the various values into the Makefile. +# You may alternatively have a special pkgIndex.tcl.in or other files +# which require substituting th AC variables in. Include these here. +#-------------------------------------------------------------------- + + ac_config_files="$ac_config_files Makefile" +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, don't put newlines in cache variables' values. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +{ + (set) 2>&1 | + case `(ac_space=' '; set | grep ac_space) 2>&1` in + *ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n \ + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + ;; + esac; +} | + sed ' + t clear + : clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + : end' >>confcache +if diff $cache_file confcache >/dev/null 2>&1; then :; else + if test -w $cache_file; then + test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" + cat confcache >$cache_file + else + echo "not updating unwritable cache $cache_file" + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +# VPATH may cause trouble with some makes, so we remove $(srcdir), +# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=/{ +s/:*\$(srcdir):*/:/; +s/:*\${srcdir}:*/:/; +s/:*@srcdir@:*/:/; +s/^\([^=]*=[ ]*\):*/\1/; +s/:*$//; +s/^[^=]*=[ ]*$//; +}' +fi + +# Transform confdefs.h into DEFS. +# Protect against shell expansion while executing Makefile rules. +# Protect against Makefile macro expansion. +# +# If the first sed substitution is executed (which looks for macros that +# take arguments), then we branch to the quote section. Otherwise, +# look for a macro that doesn't take arguments. +cat >confdef2opt.sed <<\_ACEOF +t clear +: clear +s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g +t quote +s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g +t quote +d +: quote +s,[ `~#$^&*(){}\\|;'"<>?],\\&,g +s,\[,\\&,g +s,\],\\&,g +s,\$,$$,g +p +_ACEOF +# We use echo to avoid assuming a particular line-breaking character. +# The extra dot is to prevent the shell from consuming trailing +# line-breaks from the sub-command output. A line-break within +# single-quotes doesn't work because, if this script is created in a +# platform that uses two characters for line-breaks (e.g., DOS), tr +# would break. +ac_LF_and_DOT=`echo; echo .` +DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'` +rm -f confdef2opt.sed + + +ac_libobjs= +ac_ltlibobjs= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_i=`echo "$ac_i" | + sed 's/\$U\././;s/\.o$//;s/\.obj$//'` + # 2. Add them. + ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + +CFLAGS="${CFLAGS} ${CPPFLAGS}"; CPPFLAGS="" + +: ${CONFIG_STATUS=./config.status} +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 +echo "$as_me: creating $CONFIG_STATUS" >&6;} +cat >$CONFIG_STATUS <<_ACEOF +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false +SHELL=\${CONFIG_SHELL-$SHELL} +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then + set -o posix +fi +DUALCASE=1; export DUALCASE # for MKS sh + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)$' \| \ + . : '\(.\)' 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } + /^X\/\(\/\/\)$/{ s//\1/; q; } + /^X\/\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + + +# PATH needs CR, and LINENO needs CR and PATH. +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done + + ;; + esac + # We did not find ourselves, most probably we were run as `sh COMMAND' + # in which case we are not to be found in the path. + if test "x$as_myself" = x; then + as_myself=$0 + fi + if test ! -f "$as_myself"; then + { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 +echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} + { (exit 1); exit 1; }; } + fi + case $CONFIG_SHELL in + '') + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for as_base in sh bash ksh sh5; do + case $as_dir in + /*) + if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } + CONFIG_SHELL=$as_dir/$as_base + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" ${1+"$@"} + fi;; + esac + done +done +;; + esac + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line before each line; the second 'sed' does the real + # work. The second script uses 'N' to pair each line-number line + # with the numbered line, and appends trailing '-' during + # substitution so that $LINENO is not a special case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) + sed '=' <$as_myself | + sed ' + N + s,$,-, + : loop + s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + t loop + s,-$,, + s,^['$as_cr_digits']*\n,, + ' >$as_me.lineno && + chmod +x $as_me.lineno || + { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 +echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensible to this). + . ./$as_me.lineno + # Exit status is that of the last command. + exit +} + + +case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' +' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +esac + +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + # We could just check for DJGPP; but this test a) works b) is more generic + # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). + if test -f conf$$.exe; then + # Don't use ln at all; we don't have any links + as_ln_s='cp -p' + else + as_ln_s='ln -s' + fi +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.file + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_executable_p="test -f" + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +# IFS +# We need space, tab and new line, in precisely that order. +as_nl=' +' +IFS=" $as_nl" + +# CDPATH. +$as_unset CDPATH + +exec 6>&1 + +# Open the log real soon, to keep \$[0] and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. Logging --version etc. is OK. +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX +} >&5 +cat >&5 <<_CSEOF + +This file was extended by tkimgbmp $as_me 1.4.6, which was +generated by GNU Autoconf 2.59. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +_CSEOF +echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 +echo >&5 +_ACEOF + +# Files that config.status was made for. +if test -n "$ac_config_files"; then + echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_headers"; then + echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_links"; then + echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_commands"; then + echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS +fi + +cat >>$CONFIG_STATUS <<\_ACEOF + +ac_cs_usage="\ +\`$as_me' instantiates files from templates according to the +current configuration. + +Usage: $0 [OPTIONS] [FILE]... + + -h, --help print this help, then exit + -V, --version print version number, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + +Configuration files: +$config_files + +Report bugs to ." +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF +ac_cs_version="\\ +tkimgbmp config.status 1.4.6 +configured by $0, generated by GNU Autoconf 2.59, + with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" + +Copyright (C) 2003 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." +srcdir=$srcdir +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +# If no file are specified by the user, then we need to provide default +# value. By we need to know if files were specified by the user. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=*) + ac_option=`expr "x$1" : 'x\([^=]*\)='` + ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` + ac_shift=: + ;; + -*) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + *) # This is not an option, so the user has probably given explicit + # arguments. + ac_option=$1 + ac_need_defaults=false;; + esac + + case $ac_option in + # Handling of the options. +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --vers* | -V ) + echo "$ac_cs_version"; exit 0 ;; + --he | --h) + # Conflict between --help and --header + { { echo "$as_me:$LINENO: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&5 +echo "$as_me: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&2;} + { (exit 1); exit 1; }; };; + --help | --hel | -h ) + echo "$ac_cs_usage"; exit 0 ;; + --debug | --d* | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + CONFIG_FILES="$CONFIG_FILES $ac_optarg" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" + ac_need_defaults=false;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&5 +echo "$as_me: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&2;} + { (exit 1); exit 1; }; } ;; + + *) ac_config_targets="$ac_config_targets $1" ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF +if \$ac_cs_recheck; then + echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 + exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion +fi + +_ACEOF + + + + + +cat >>$CONFIG_STATUS <<\_ACEOF +for ac_config_target in $ac_config_targets +do + case "$ac_config_target" in + # Handling of arguments. + "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; + *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 +echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; + esac +done + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason to put it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Create a temporary directory, and hook for its removal unless debugging. +$debug || +{ + trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 + trap '{ (exit 1); exit 1; }' 1 2 13 15 +} + +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && + test -n "$tmp" && test -d "$tmp" +} || +{ + tmp=./confstat$$-$RANDOM + (umask 077 && mkdir $tmp) +} || +{ + echo "$me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } +} + +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF + +# +# CONFIG_FILES section. +# + +# No need to generate the scripts if there are no CONFIG_FILES. +# This happens for instance when ./config.status config.h +if test -n "\$CONFIG_FILES"; then + # Protect against being on the right side of a sed subst in config.status. + sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; + s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF +s,@SHELL@,$SHELL,;t t +s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t +s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t +s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t +s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t +s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t +s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t +s,@exec_prefix@,$exec_prefix,;t t +s,@prefix@,$prefix,;t t +s,@program_transform_name@,$program_transform_name,;t t +s,@bindir@,$bindir,;t t +s,@sbindir@,$sbindir,;t t +s,@libexecdir@,$libexecdir,;t t +s,@datadir@,$datadir,;t t +s,@sysconfdir@,$sysconfdir,;t t +s,@sharedstatedir@,$sharedstatedir,;t t +s,@localstatedir@,$localstatedir,;t t +s,@libdir@,$libdir,;t t +s,@includedir@,$includedir,;t t +s,@oldincludedir@,$oldincludedir,;t t +s,@infodir@,$infodir,;t t +s,@mandir@,$mandir,;t t +s,@build_alias@,$build_alias,;t t +s,@host_alias@,$host_alias,;t t +s,@target_alias@,$target_alias,;t t +s,@DEFS@,$DEFS,;t t +s,@ECHO_C@,$ECHO_C,;t t +s,@ECHO_N@,$ECHO_N,;t t +s,@ECHO_T@,$ECHO_T,;t t +s,@LIBS@,$LIBS,;t t +s,@CYGPATH@,$CYGPATH,;t t +s,@EXEEXT@,$EXEEXT,;t t +s,@PKG_LIB_FILE@,$PKG_LIB_FILE,;t t +s,@PKG_STUB_LIB_FILE@,$PKG_STUB_LIB_FILE,;t t +s,@PKG_STUB_SOURCES@,$PKG_STUB_SOURCES,;t t +s,@PKG_STUB_OBJECTS@,$PKG_STUB_OBJECTS,;t t +s,@PKG_TCL_SOURCES@,$PKG_TCL_SOURCES,;t t +s,@PKG_HEADERS@,$PKG_HEADERS,;t t +s,@PKG_INCLUDES@,$PKG_INCLUDES,;t t +s,@PKG_LIBS@,$PKG_LIBS,;t t +s,@PKG_CFLAGS@,$PKG_CFLAGS,;t t +s,@PACKAGE_TCLNAME@,$PACKAGE_TCLNAME,;t t +s,@TCL_VERSION@,$TCL_VERSION,;t t +s,@TCL_PATCH_LEVEL@,$TCL_PATCH_LEVEL,;t t +s,@TCL_BIN_DIR@,$TCL_BIN_DIR,;t t +s,@TCL_SRC_DIR@,$TCL_SRC_DIR,;t t +s,@TCL_LIB_FILE@,$TCL_LIB_FILE,;t t +s,@TCL_LIB_FLAG@,$TCL_LIB_FLAG,;t t +s,@TCL_LIB_SPEC@,$TCL_LIB_SPEC,;t t +s,@TCL_STUB_LIB_FILE@,$TCL_STUB_LIB_FILE,;t t +s,@TCL_STUB_LIB_FLAG@,$TCL_STUB_LIB_FLAG,;t t +s,@TCL_STUB_LIB_SPEC@,$TCL_STUB_LIB_SPEC,;t t +s,@CC@,$CC,;t t +s,@CFLAGS@,$CFLAGS,;t t +s,@LDFLAGS@,$LDFLAGS,;t t +s,@CPPFLAGS@,$CPPFLAGS,;t t +s,@ac_ct_CC@,$ac_ct_CC,;t t +s,@OBJEXT@,$OBJEXT,;t t +s,@CLEANFILES@,$CLEANFILES,;t t +s,@TCL_LIBS@,$TCL_LIBS,;t t +s,@TCL_DEFS@,$TCL_DEFS,;t t +s,@TCL_EXTRA_CFLAGS@,$TCL_EXTRA_CFLAGS,;t t +s,@TCL_LD_FLAGS@,$TCL_LD_FLAGS,;t t +s,@TCL_SHLIB_LD_LIBS@,$TCL_SHLIB_LD_LIBS,;t t +s,@TK_VERSION@,$TK_VERSION,;t t +s,@TK_BIN_DIR@,$TK_BIN_DIR,;t t +s,@TK_SRC_DIR@,$TK_SRC_DIR,;t t +s,@TK_LIB_FILE@,$TK_LIB_FILE,;t t +s,@TK_LIB_FLAG@,$TK_LIB_FLAG,;t t +s,@TK_LIB_SPEC@,$TK_LIB_SPEC,;t t +s,@TK_STUB_LIB_FILE@,$TK_STUB_LIB_FILE,;t t +s,@TK_STUB_LIB_FLAG@,$TK_STUB_LIB_FLAG,;t t +s,@TK_STUB_LIB_SPEC@,$TK_STUB_LIB_SPEC,;t t +s,@TK_LIBS@,$TK_LIBS,;t t +s,@TK_XINCLUDES@,$TK_XINCLUDES,;t t +s,@CPP@,$CPP,;t t +s,@INSTALL@,$INSTALL,;t t +s,@INSTALL_DATA_DIR@,$INSTALL_DATA_DIR,;t t +s,@INSTALL_DATA@,$INSTALL_DATA,;t t +s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t +s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t +s,@INSTALL_LIBRARY@,$INSTALL_LIBRARY,;t t +s,@SET_MAKE@,$SET_MAKE,;t t +s,@RANLIB@,$RANLIB,;t t +s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t +s,@EGREP@,$EGREP,;t t +s,@MATH_LIBS@,$MATH_LIBS,;t t +s,@tkimg_VERSION@,$tkimg_VERSION,;t t +s,@tkimg_BIN_DIR@,$tkimg_BIN_DIR,;t t +s,@tkimg_SRC_DIR@,$tkimg_SRC_DIR,;t t +s,@tkimg_LIB_FILE@,$tkimg_LIB_FILE,;t t +s,@tkimg_LIB_SPEC@,$tkimg_LIB_SPEC,;t t +s,@tkimg_STUB_LIB_FILE@,$tkimg_STUB_LIB_FILE,;t t +s,@tkimg_STUB_LIB_SPEC@,$tkimg_STUB_LIB_SPEC,;t t +s,@tkimg_STUB_LIB_PATH@,$tkimg_STUB_LIB_PATH,;t t +s,@tkimg_SRC_PATH@,$tkimg_SRC_PATH,;t t +s,@tkimg_BUILD_PATH@,$tkimg_BUILD_PATH,;t t +s,@PKG_SOURCES@,$PKG_SOURCES,;t t +s,@PKG_OBJECTS@,$PKG_OBJECTS,;t t +s,@TCL_INCLUDES@,$TCL_INCLUDES,;t t +s,@TK_INCLUDES@,$TK_INCLUDES,;t t +s,@TCL_THREADS@,$TCL_THREADS,;t t +s,@SHARED_BUILD@,$SHARED_BUILD,;t t +s,@AR@,$AR,;t t +s,@ac_ct_AR@,$ac_ct_AR,;t t +s,@CELIB_DIR@,$CELIB_DIR,;t t +s,@RC@,$RC,;t t +s,@ac_ct_RC@,$ac_ct_RC,;t t +s,@CFLAGS_DEBUG@,$CFLAGS_DEBUG,;t t +s,@CFLAGS_OPTIMIZE@,$CFLAGS_OPTIMIZE,;t t +s,@CFLAGS_WARNING@,$CFLAGS_WARNING,;t t +s,@STLIB_LD@,$STLIB_LD,;t t +s,@SHLIB_LD@,$SHLIB_LD,;t t +s,@SHLIB_LD_LIBS@,$SHLIB_LD_LIBS,;t t +s,@SHLIB_CFLAGS@,$SHLIB_CFLAGS,;t t +s,@LD_LIBRARY_PATH_VAR@,$LD_LIBRARY_PATH_VAR,;t t +s,@CFLAGS_DEFAULT@,$CFLAGS_DEFAULT,;t t +s,@LDFLAGS_DEFAULT@,$LDFLAGS_DEFAULT,;t t +s,@TCL_DBGX@,$TCL_DBGX,;t t +s,@MAKE_LIB@,$MAKE_LIB,;t t +s,@MAKE_SHARED_LIB@,$MAKE_SHARED_LIB,;t t +s,@MAKE_STATIC_LIB@,$MAKE_STATIC_LIB,;t t +s,@MAKE_STUB_LIB@,$MAKE_STUB_LIB,;t t +s,@RANLIB_STUB@,$RANLIB_STUB,;t t +s,@VC_MANIFEST_EMBED_DLL@,$VC_MANIFEST_EMBED_DLL,;t t +s,@VC_MANIFEST_EMBED_EXE@,$VC_MANIFEST_EMBED_EXE,;t t +s,@TCLSH_PROG@,$TCLSH_PROG,;t t +s,@WISH_PROG@,$WISH_PROG,;t t +s,@LIBOBJS@,$LIBOBJS,;t t +s,@LTLIBOBJS@,$LTLIBOBJS,;t t +CEOF + +_ACEOF + + cat >>$CONFIG_STATUS <<\_ACEOF + # Split the substitutions into bite-sized pieces for seds with + # small command number limits, like on Digital OSF/1 and HP-UX. + ac_max_sed_lines=48 + ac_sed_frag=1 # Number of current file. + ac_beg=1 # First line for current file. + ac_end=$ac_max_sed_lines # Line after last line for current file. + ac_more_lines=: + ac_sed_cmds= + while $ac_more_lines; do + if test $ac_beg -gt 1; then + sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag + else + sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag + fi + if test ! -s $tmp/subs.frag; then + ac_more_lines=false + else + # The purpose of the label and of the branching condition is to + # speed up the sed processing (if there are no `@' at all, there + # is no need to browse any of the substitutions). + # These are the two extra sed commands mentioned above. + (echo ':t + /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed + if test -z "$ac_sed_cmds"; then + ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" + else + ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" + fi + ac_sed_frag=`expr $ac_sed_frag + 1` + ac_beg=$ac_end + ac_end=`expr $ac_end + $ac_max_sed_lines` + fi + done + if test -z "$ac_sed_cmds"; then + ac_sed_cmds=cat + fi +fi # test -n "$CONFIG_FILES" + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case $ac_file in + - | *:- | *:-:* ) # input from stdin + cat >$tmp/stdin + ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + * ) ac_file_in=$ac_file.in ;; + esac + + # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. + ac_dir=`(dirname "$ac_file") 2>/dev/null || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + { if $as_mkdir_p; then + mkdir -p "$ac_dir" + else + as_dir="$ac_dir" + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + { (exit 1); exit 1; }; }; } + + ac_builddir=. + +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi + +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac + +# Do not use `cd foo && pwd` to compute absolute paths, because +# the directories may not exist. +case `pwd` in +.) ac_abs_builddir="$ac_dir";; +*) + case "$ac_dir" in + .) ac_abs_builddir=`pwd`;; + [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; + *) ac_abs_builddir=`pwd`/"$ac_dir";; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_builddir=${ac_top_builddir}.;; +*) + case ${ac_top_builddir}. in + .) ac_abs_top_builddir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; + *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_srcdir=$ac_srcdir;; +*) + case $ac_srcdir in + .) ac_abs_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; + *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_srcdir=$ac_top_srcdir;; +*) + case $ac_top_srcdir in + .) ac_abs_top_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; + *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; + esac;; +esac + + + + if test x"$ac_file" != x-; then + { echo "$as_me:$LINENO: creating $ac_file" >&5 +echo "$as_me: creating $ac_file" >&6;} + rm -f "$ac_file" + fi + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + if test x"$ac_file" = x-; then + configure_input= + else + configure_input="$ac_file. " + fi + configure_input=$configure_input"Generated from `echo $ac_file_in | + sed 's,.*/,,'` by configure." + + # First look for the input files in the build tree, otherwise in the + # src tree. + ac_file_inputs=`IFS=: + for f in $ac_file_in; do + case $f in + -) echo $tmp/stdin ;; + [\\/$]*) + # Absolute (can't be DOS-style, as IFS=:) + test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + echo "$f";; + *) # Relative + if test -f "$f"; then + # Build tree + echo "$f" + elif test -f "$srcdir/$f"; then + # Source tree + echo "$srcdir/$f" + else + # /dev/null tree + { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + fi;; + esac + done` || { (exit 1); exit 1; } +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF + sed "$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s,@configure_input@,$configure_input,;t t +s,@srcdir@,$ac_srcdir,;t t +s,@abs_srcdir@,$ac_abs_srcdir,;t t +s,@top_srcdir@,$ac_top_srcdir,;t t +s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t +s,@builddir@,$ac_builddir,;t t +s,@abs_builddir@,$ac_abs_builddir,;t t +s,@top_builddir@,$ac_top_builddir,;t t +s,@abs_top_builddir@,$ac_abs_top_builddir,;t t +" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out + rm -f $tmp/stdin + if test x"$ac_file" != x-; then + mv $tmp/out $ac_file + else + cat $tmp/out + rm -f $tmp/out + fi + +done +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF + +{ (exit 0); exit 0; } +_ACEOF +chmod +x $CONFIG_STATUS +ac_clean_files=$ac_clean_files_save + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || { (exit 1); exit 1; } +fi + + +#-------------------------------------------------------------------- diff --git a/bmp/configure.in b/bmp/configure.in new file mode 100755 index 0000000..4165fa6 --- /dev/null +++ b/bmp/configure.in @@ -0,0 +1,199 @@ +dnl +dnl Process this file with autoconf to produce a configure script. +dnl +AC_REVISION($Id: configure.in 405 2016-05-24 18:51:34Z obermeier $) + +#-------------------------------------------------------------------- +# Configure script for package 'tkimgbmp', as distributed at November 20, 2001. +# TEA compliant. +#-------------------------------------------------------------------- + +AC_INIT([tkimgbmp],[1.4.6]) + +TEA_INIT([3.9]) + +AC_CONFIG_AUX_DIR(../tclconfig) + +PHIMGTYPE="bmp" +CPACKAGE="Tkimgbmp" +PACKAGE_TCLNAME="img::bmp" +AC_SUBST(PACKAGE_TCLNAME) + +#-------------------------------------------------------------------- +# Load the tclConfig.sh file +# Load the tkConfig.sh file +#-------------------------------------------------------------------- + +TEA_PATH_TCLCONFIG +TEA_LOAD_TCLCONFIG + +TEA_PATH_TKCONFIG +TEA_LOAD_TKCONFIG + +#----------------------------------------------------------------------- +# Handle the --prefix=... option by defaulting to what Tcl gave. +# Must be called after TEA_LOAD_TCLCONFIG and before TEA_SETUP_COMPILER. +#----------------------------------------------------------------------- + +TEA_PREFIX + +#----------------------------------------------------------------------- +# Standard compiler checks. +# This sets up CC by using the CC env var, or looks for gcc otherwise. +# This also calls AC_PROG_CC, AC_PROG_INSTALL and a few others to create +# the basic setup necessary to compile executables. +#----------------------------------------------------------------------- + +TEA_SETUP_COMPILER + +TEA_PATH_CONFIG(tkimg) +TEA_LOAD_CONFIG(tkimg) + +IMG_SRCPATH(tkimg) + +#----------------------------------------------------------------------- +# Specify the C source files to compile in TEA_ADD_SOURCES, +# public headers that need to be installed in TEA_ADD_HEADERS, +# stub library C source files to compile in TEA_ADD_STUB_SOURCES, +# and runtime Tcl library files in TEA_ADD_TCL_SOURCES. +# This defines PKG(_STUB)_SOURCES, PKG(_STUB)_OBJECTS, PKG_HEADERS +# and PKG_TCL_SOURCES. +#----------------------------------------------------------------------- + +TEA_ADD_SOURCES([bmp.c]) +TEA_ADD_HEADERS([]) +TEA_ADD_INCLUDES([-I\"`\${CYGPATH} \${tkimg_SRC_PATH}`\"]) +TEA_ADD_INCLUDES([-I.]) +TEA_ADD_LIBS([]) +TEA_ADD_CFLAGS([]) +TEA_ADD_CFLAGS([-DTKIMG_VERSION=\\\"\${tkimg_VERSION}\\\"]) +TEA_ADD_STUB_SOURCES([]) +TEA_ADD_TCL_SOURCES([]) + +PUP="`echo ${PACKAGE_NAME}| tr 'a-z' 'A-Z'`" + +sed < "`${CYGPATH} ${srcdir}/../init.c`" > "init.c" \ + -e "s/@CPACKAGE@/${CPACKAGE}/" \ + -e "s/%PACKAGE%/${PACKAGE_NAME}/" \ + -e "s/%PACKAGE_UP%/${PUP}/" \ + -e "s/%PHIMGTYPE%/${PHIMGTYPE}/" + +# init.c is an included source file, not a source by itself +# FUTURE: Do this through AC_OUTPUT!! + +#-------------------------------------------------------------------- +# __CHANGE__ +# Choose which headers you need. Extension authors should try very +# hard to only rely on the Tcl public header files. Internal headers +# contain private data structures and are subject to change without +# notice. +# This MUST be called after TEA_LOAD_TCLCONFIG / TEA_LOAD_TKCONFIG +#-------------------------------------------------------------------- + +TEA_PUBLIC_TCL_HEADERS +TEA_PUBLIC_TK_HEADERS + +#-------------------------------------------------------------------- +# A few miscellaneous platform-specific items: +# +# Windows creates a few extra files that need to be cleaned up. +# We can add more files to clean if our extension creates any extra +# files in the future. +# +# Define any extra compiler flags in the PACKAGE_CFLAGS variable. +# These will be appended to the current set of compiler flags for +# your system. +#-------------------------------------------------------------------- + +if test "${TEA_PLATFORM}" = "windows" ; then + CLEANFILES="*.lib *.dll *.exp *.ilk *.pdb vc*.pch init.c" +else + CLEANFILES="init.c" +fi +AC_SUBST(CLEANFILES) + +#-------------------------------------------------------------------- +# Check whether --enable-threads or --disable-threads was given. +# So far only Tcl responds to this one. +#-------------------------------------------------------------------- + +TEA_ENABLE_THREADS + +#-------------------------------------------------------------------- +# The statement below defines a collection of symbols related to +# building as a shared library instead of a static library. +#-------------------------------------------------------------------- + +TEA_ENABLE_SHARED + +#-------------------------------------------------------------------- +# This macro figures out what flags to use with the compiler/linker +# when building shared/static debug/optimized objects. This information +# can be taken from the tclConfig.sh file, but this figures it all out. +#-------------------------------------------------------------------- + +TEA_CONFIG_CFLAGS + +#-------------------------------------------------------------------- +# Set the default compiler switches based on the --enable-symbols option. +#-------------------------------------------------------------------- + +TEA_ENABLE_SYMBOLS + +#-------------------------------------------------------------------- +# For Unix/Tk builds, make sure that the X libraries/headers are found. +# This must be called after TEA_CONFIG_CFLAGS as it adjusts LIBS. +#-------------------------------------------------------------------- + +TEA_PATH_X + +#-------------------------------------------------------------------- +# Everyone should be linking against the Tcl stub library. If you +# can't for some reason, remove this definition. If you aren't using +# stubs, you also need to modify the SHLIB_LD_LIBS setting below to +# link against the non-stubbed Tcl library. +#-------------------------------------------------------------------- + +AC_DEFINE(USE_TCL_STUBS) +AC_DEFINE(USE_TK_STUBS) + +#-------------------------------------------------------------------- +# This macro generates a line to use when building a library. It +# depends on values set by the TEA_ENABLE_SHARED, TEA_ENABLE_SYMBOLS, +# and TEA_LOAD_TCLCONFIG macros above. +#-------------------------------------------------------------------- + +TEA_MAKE_LIB + +#-------------------------------------------------------------------- +# __CHANGE__ +# Add platform libs to LIBS or SHLIB_LD_LIBS as necessary. +#-------------------------------------------------------------------- + +if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes" ; then + TEA_ADD_LIBS([\"`${CYGPATH} ${tkimg_STUB_LIB_PATH}`\"]) +else + TEA_ADD_LIBS([${tkimg_STUB_LIB_SPEC}]) +fi + +#-------------------------------------------------------------------- +# Find tclsh so that we can run pkg_mkIndex to generate the pkgIndex.tcl +# file during the install process. Don't run the TCLSH_PROG through +# ${CYGPATH} because it's being used directly by make. +# Require that we use a tclsh shell version 8.2 or later since earlier +# versions have bugs in the pkg_mkIndex routine. +# Add WISH as well if this is a Tk extension. +#-------------------------------------------------------------------- + +TEA_PROG_TCLSH +TEA_PROG_WISH + +#-------------------------------------------------------------------- +# Finally, substitute all of the various values into the Makefile. +# You may alternatively have a special pkgIndex.tcl.in or other files +# which require substituting th AC variables in. Include these here. +#-------------------------------------------------------------------- + +AC_OUTPUT([Makefile]) + +#-------------------------------------------------------------------- diff --git a/bmp/tests/WizImg.bmp b/bmp/tests/WizImg.bmp new file mode 100755 index 0000000..075f68e Binary files /dev/null and b/bmp/tests/WizImg.bmp differ diff --git a/bmp/tests/all.tcl b/bmp/tests/all.tcl new file mode 100755 index 0000000..7010d2d --- /dev/null +++ b/bmp/tests/all.tcl @@ -0,0 +1,24 @@ +# all.tcl -- -*- tcl -*- +# +# Import common functionality, then run the tests in this directory. +# +# Copyright (c) 2002 Andreas Kupries +# All rights reserved. +# +# RCS: @(#) $Id: all.tcl 224 2009-07-27 08:47:46Z nijtmans $ + +set _pwd [pwd] +cd [file dirname [file join [pwd] [info script]]] +set _here [pwd] +cd $_pwd +source [file join [file dirname [file dirname $_here]] tests all.tcl] +unset _pwd _here + +set ::tcltest::testSingleFile false +set ::tcltest::testsDirectory [file dirname [info script]] + +# We need to ensure that the testsDirectory is absolute +::tcltest::normalizePath ::tcltest::testsDirectory + +run_tests +exit diff --git a/bmp/tests/bmp.test b/bmp/tests/bmp.test new file mode 100755 index 0000000..5de55f4 --- /dev/null +++ b/bmp/tests/bmp.test @@ -0,0 +1,53 @@ +# This file is a Tcl script to test out BMP reading and writing. +# It is organized in the standard fashion for Tcl tests. +# + +puts "img::bmp [package require img::bmp]" + +set bmpdata \ +{Qk12AgAAAAAAADYAAAAoAAAAEAAAAAwAAAABABgAAAAAAEACAABtCwAAbQsAAAAAAAAAAAAA +AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA2dnZ2dnZ2dnZAAAAgP/w +gP/wgP/wgP/wgP/wgP/wgP/wgP/wgP/wgP/wgP/wAAAA2dnZ2dnZ2dnZAAAAgP/wgP/wgP/w +gP/wgP/wgP/wgP/wgP/wgP/wgP/wgP/wAAAA2dnZ2dnZ2dnZAAAAgP/wgP/wgP/wgP/wgP/w +gP/wgP/wgP/wgP/wgP/wgP/wAAAA2dnZ2dnZ2dnZAAAAgP/wgP/wgP/wgP/wgP/wgP/wgP/w +gP/wgP/wgP/wgP/wAAAA2dnZ2dnZ2dnZAAAAgP/wgP/wgP/wgP/wgP/wgP/wgP/wgP/wgP/w +gP/wgP/wAAAA2dnZ2dnZ2dnZAAAAgP/wgP/wgP/wgP/wgP/wgP/wgP/wgP/wgP/wgP/wgP/w +AAAA2dnZ2dnZ2dnZAAAAgP/wgP/wgP/wgP/wgP/wgP/wgP/wgP/wgP/wgP/wgP/wAAAA2dnZ +2dnZ2dnZAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA2dnZ2dnZ2dnZ +2dnZAAAAgP/wgP/wgP/wgP/wgP/wgP/wAAAA2dnZ2dnZ2dnZ2dnZ2dnZ2dnZ2dnZ2dnZ2dnZ +AAAAgP/wgP/wgP/wgP/wAAAA2dnZ2dnZ2dnZ2dnZ2dnZ2dnZ2dnZ2dnZ2dnZ2dnZ2dnZAAAA +AAAAAAAAAAAA2dnZ2dnZ2dnZ2dnZ2dnZ2dnZ2dnZ2dnZ2dnZ} + + +test bmp-1.1 {} { + catch {image delete i} + image create photo i -file [file join $tcltest::testsDirectory folder.bmp] + i data -format bmp +} $bmpdata +test bmp-1.2 {} { + catch {image delete i} + image create photo i -data $bmpdata + set data [i data -format bmp] +} $bmpdata +test bmp-1.3 {} { + i blank + i put $bmpdata + set data [i data -format bmp] +} $bmpdata +test bmp-1.4 {} { + i blank + i put $bmpdata -format bmp + set data [i data -format bmp] +} $bmpdata +if {[info tclversion] < 8.0} { + return +} + +test bmp-2.0 {Binary I/O with BMP images} { + i blank + set f [open [file join $tcltest::testsDirectory folder.bmp] r] + fconfigure $f -translation binary + set return [catch {i put [read $f]} msg] + close $f + lappend return $msg +} {0 {}} diff --git a/bmp/tests/bmp4r.bmp b/bmp/tests/bmp4r.bmp new file mode 100755 index 0000000..a0ff045 Binary files /dev/null and b/bmp/tests/bmp4r.bmp differ diff --git a/bmp/tests/bmp8r.bmp b/bmp/tests/bmp8r.bmp new file mode 100755 index 0000000..bef0039 Binary files /dev/null and b/bmp/tests/bmp8r.bmp differ diff --git a/bmp/tests/folder.bmp b/bmp/tests/folder.bmp new file mode 100755 index 0000000..b8cd319 Binary files /dev/null and b/bmp/tests/folder.bmp differ diff --git a/bmp/tests/img.bmp b/bmp/tests/img.bmp new file mode 100755 index 0000000..0744441 Binary files /dev/null and b/bmp/tests/img.bmp differ diff --git a/changes b/changes new file mode 100755 index 0000000..4bd42e7 --- /dev/null +++ b/changes @@ -0,0 +1,335 @@ +This file summarizes all changes made to Img since version 1.0 was +released in April, 1997. + +6/5/97 (bug fix) removed fclose() in imgTIFF.c, because the generic + image code already closes the file. This resulted in a crash + on some machines, when reading a tiff file from disk. + +6/9/97 Added Channel functions for all format handlers. Needed to + make everything work again in combination with Tk8.0b1. + +6/12/97 Removed Xlib sub-directory and moved tkWinInt.h and tkMacInt.h + to the main directory. reason: Xlib.h is already installed by + Tk, so there is no need for Img to do it as well. + +6/12/97 (bug-fix) test.png in reality was an XPM file. + +6/12/97 Upgraded libpng to version 0.96 + +7/1/97 Removed __eprintf() function: The assert() function + (which was the problem) can be disabled with + -DNDEBUG as well, which is much simpler. + +7/1/97 Fixed bug in PNG interlace handling: Now interlaced + images will be produced by default. + +7/1/97 Added support for animated GIF. Not complete yet. + +7/10/97 Added support for binary I/O in all format handlers. The + initialization automatically detects if the current Tcl + version supports this. + +7/11/97 Construction of new patch.tk8, which combines Steve Ball's + work with mine. Now binary I/O is fully supported. + +7/16/97 Removed the "fromData" hack from all format handlers. + +7/17/97 Speedup of TIFF format handler: No longer uses a temporary + file to store intermediate results, but does everyting + in memory. This enhancement uses the function TIFFClientOpen, + which is only available in newer TIFF libraries. If this + function cannot be found, the slower original approach is + taken. + +7/18/97 Added support for BMP format. Still incomplete. + +7/20/97 Completed support for animated GIF. Added example animated + GIF to demo. + +7/24/97 Added support for 1-bit BMP images. Now only + RLE decompressing left to be implemented. + +7/26/97 Changed TIFF handler such that libz and libjpeg are + only loaded when needed (new files imgTIFFjpeg.c and + imgTIFFzip.c, adapted from tif_jpeg.c and tif_zip.c + from the TIFF source). + +7/26/97 Added postscript format handler (imgPS.c), read only. + Assumes that Ghostscript (version 2.6 or higher) + is installed on your system. + +7/28/97 Changed GIF format string to be "gif -index " in stead of + "gif ". The old format is still accepted for backwards + compatibility with version 1.1b1, but no longer documented. + +8/1/97 Added option "-zoom" to postscript handler. + +8/11/97 Modified all patches to correct the "imageName copy" + command. Previously it didn't handle transparency + correctly. Plus another bug fix related to the alpha + channel. Thanks to Nick Ing-Simmons + for providing the fix. + +8/12/97 Bug fix. Transparency turned out not to be handled correctly + for paletted PNG images. Tk and XV cannot produce such images, that's + why this is not discovered earlier. Thanks to Stephane Lavirotte + for pointing this out. + +8/13/97 Converted the "format" argument of the Image API to Tcl_Obj's. + This influenced all source files and "patch.tk8". So, you + cannot use older versions of "patch.tk8" with Img1.1 any more, + and the latest "patch.tk8" doesn't work with Img1.1b3 as well. + +8/16/97 Added "install.tcl" and "tkv.tcl" + +8/18/97 Tcl8.0a1 and Tcl8.0a2 are no longer supported. + +8/18/97 Adapted "patch.tk8" to the final Tk8.0 release. Constructed + new files "patchtk8.tgz" and "patchtk8.zip", which contain + a collection of the Tk8.0 files that changed. The latter files + are not distributed with Img 1.1, but can be found in the + same directory where you got Img 1.1. + +----------------- Released 1.1, 8/18/97 ----------------------- + +8/21/97 (bug fix) "tkv.tcl" didn't display the menu's correctly using + Tk4.2, apart from the fact that they turned out to look horrible + on Windows anyway. In combination with Tk8.0, Tkv uses the new + menu interface now, which doesn't have this problem. + +8/21/97 (bug fix) "demo.tcl" changed the working directory when the + additional tests are interrupted by using the "dismiss" button. + +8/21/97 (bug fix) Removed POSIX dependancies from imgInit.c, imgPmap.c, + imgPS.c and imgTIFF.c. This will make porting to non-POSIX + systems (e.g. Mac) easier, but makes no difference on + POSIX-compliant machines. + +8/22/97 Added file MW_ImgHeader.pch, which is used as a pre-compilied + header source for all files in the Img package. This make compilies + go a bit faster. This file is only intended to be used in the + MetroWerks CodeWarrior environment. + +8/24/97 Added "patch.tkx", which enhances the TclX help system to + reflect the changes in patch.tk4 and patch.tk8 + +8/26/97 (bug fix) JPEG handler crashed on some machines when writing + big JPEG images to disk. Thanks to Peter T. Waltenberg + for reporting this bug, and for + providing an example script which demonstrated this problem. + +8/27/97 (bug fix) Serveral minor changes to remove warning when compiling + under Windows and Mac. Thanks to Mazin As-Sanie + for reporting those to me. + +8/27/97 (bug fix) Eliminated Tcl_Realloc() call in imgTIFF.c. This function + didn't exist yet in Tk4.2 and before. + +9/5/97 (bug fix) install.tcl assumed that the PATH enviroment variable + was a ':'-separated list. This is correct on UNIX, but on Windows + the separation character should be ';' + +9/7/97 (bug fix) Fixed patch.tk8 such that the "imgName copy" command + handles transparency fully correct. Previously copied pixels + just replaced the existing pixels and the regions were not + merged correctly. Now that has been fixed. If a partially trans- + parent pixel is copied on top of an already partially transparent + pixel, a new color and a new transparency value is determined, + consisting of a combination of both. + +9/8/97 (bug fix) GIF handler didn't handle local colormaps correctly. + Lucky enough most GIF's only have a global colormap. + +----------------- Released 1.1p1, 9/9/97 ----------------------- + +10/1/97 (bug-fix) Oops. Previous bug-fix was not correct :-( + Still didn't work with local colormaps. + +10/17/97 (bug fix) patch.tix didn't correctly initialize + the variable "format", because this variable + was disturbed by the new initialization code. + +10/22/97 (bug-fix) Applied the official patch #1 to libz 1.0.4. + This makes the library more robust in respect to + corrupted compressed streams. (see README.ZLIB) + +11/1/97 (bug-fix, feature change) Upgraded tiff library + to version 3.4.37 (was 3.4.33) + +11/1/97 Eliminated the function Tk_ParseArgv(), which makes + the tiff- and jpeg- handlers thread-safe. As long as + Tk is not thread-safe this doesn't help much, but at + least Img is prepared now for the multi-threaded future. + +11/3/97 Added rule to makefile.vc to build Img for Tk8.1. This is + not guaranteed because Tk8.1 is not released yet, but if + there are not too much incompatibilities it should work. + +11/3/97 Enhanced the bitmap image type (in patch.tk8) to use + the new Tcl_Obj API. + +11/9/97 (feature change) Adapted patch.tk4 and patch.tk8 such + that "imageName read" and "imageName put" now return + the format of the readed data in stead of the empty string. + +11/9/97 (feature change) Added logluv compression support to + TIFF format handler. + +11/9/97 Recreated patch.tk8 using Tk8.0p1, and also created + new files patchtk8.tgz and patchtk8.zip from it. + Documented that Img is now tested with Tk8.0p1 as well. + +----------------- Released 1.1p2, 11/10/97 ----------------------- + +11/15/97 (new feature) Added imgWindow.c + +11/25/97 (new feature) Added libttf.so (ttf.dll on Windows) + +11/27/97 (enhancement) Made the changes required by the new Apple + Universal Headers V.3.0, so that Img will compile with CW Pro 2. + +11/30/97 PNG hopepage has moved. Changed README.PNG accordingly. + +12/7/97 Added PDF encoder, using ghostscript. Doesn't work yet. + +12/15/97 Removed support for Tk4.2. + +12/30/97 Added support for byteArrays. This fixes binary I/O in + combination with Tk8.1a1. + +1/27/98 Added patch.tk81a1, created with the official Tk8.1a1 + distribution. + +1/28/98 Upgrade to libz version 1.0.8. + +----------------- Released 1.2a1, 1/28/98 ----------------------- + +2/27/98 Upgrade to libz version 1.0.8. + +2/27/98 Upgrade to libpng version 0.99d, fixing shared library + version number to 2.0.99, as suggested by png.h. + +10/25/98 Fixed imgWindow.c for Windows. Patch supplied by + Robin Becker . + +11/19/98 Upgrade to libz 1.1.3, libpng 1.0.2 and libttf 2.0.1. + +11/19/98 Fixed configure script in order to work with Tcl8.0.3 + and also the upcoming 8.0.4 and 8.0.5 + +3/14/99 Added 8.1b2 compatible Stub support + +3/14/99 Removed libttf and libgif support. + +----------------- Released 1.2b1, 3/14/99 ----------------------- + +3/19/99 Finished "Makefile.gnu". Some more tweaking of Tk and CygWin + header-files is needed to make it work, but at least Img has + full CygWin support now. Only works with CygWin B20.1 and higher. + +3/29/99 Better support for byte-compiler in demo.tcl and tkv.tcl, + using {}'s around expressions always. Also removing + old Tk4.2 compatible menu-code. + +3/29/99 Internal changes, using Tcl_Obj's in more places. + Suggested by Nick Ing-Simmons. This will make the + port to perl/Tk easier. + +3/29/99 Upgrade to libpng 1.0.3 + +----------------- Released 1.2b2, 3/29/99 ----------------------- + +5/23/99 Documentation enhancements: Everything is available in + html now. + +----------------- Released 1.2, 5/23/99 ----------------------- + +9/3/99 Added suitable patch for Tk8.2.0 + +9/7/99 Modified BMP generation to generate 8-bit paletted if + there are less than 257 colors but more than 512 pixels. + Donated by Roger E Critchlow Jr + +9/7/99 Upgraded tiff library to version 3.5.1, thereby disabling + lzw support. + +----------------- Released 1.2.1, 9/16/99 ----------------------- + +10/16/99 Upgraded tiff library to version 3.5.2 and png library + to version 1.0.5. LZW-support is still disabled. + +10/19/99 Modified PNG gamma correction following the latest + PNG 1.2 specification. + +10/26/99 Applied official fax3-patch to libtiff 3.5.2, fixing + certain fax3 images (whatever that may be.....). + +10/26/99 Modified zlib to use the _stdcall in stead of the _cdecl + convention. This is the way Gilles Vollent compiles it's + zlib dll's, and he is the 'official' zlib windows maintainer. + INCOMPATIBLE on Windows!!!!!!!!!!!!! + +10/26/99 Fixed undocumented base-64 encoder/decoder to correctly + report "wrong number of arguments". + +10/27/99 Fixed bug in BMP handler, which caused sometimes colors + to be distorted when reading certain BMP images. + +----------------- Released 1.2.2, 10/27/99 ----------------------- + +11/10/99 Modified all handlers to use the extended Photo API when + running with Tk8.3 or higher. + +11/10/99 Fixed tkv.tcl (from demo.tcl) and tests to be independant + from working directory. + +11/10/99 Fixed libpng/makefile.vc to use _stdcall convention for + zlib functions. + +1/15/2000 Fixed "-encoding none" problem. + +1/15/2000 Upgraded libtiff to version 3.5.4 + +1/15/2000 All handler names are now in lower-case. + +----------------- Released 1.2.3, 1/16/2000 ----------------------- + +5/7/2000 Added some missing symbols to tclLoadNone.c + +5/7/2000 Fixed missing "-rpath" option. Bug reported by Larry Virden. + +5/7/2000 Made PNG handler independant of jmpbuf support in libpng. + This makes Img work with libpng 1.1 (still in beta, and + unlikely ever to be released to the public), and hopefully + also with more future libpng versions. + +5/10/2000 Fixed possible infinite loop in XBM format handler. Bug + reported by Gianandrea Rigoni + +5/11/2000 Changed URL of zlib and libpng to point to the current + location everywhere. + +7/8/2000 Upgraded libtiff to version 3.5.5 + +7/9/2000 Internationalized demo.tcl and tkv.tcl + +7/13/2000 Bug-fix in BMP write function. If an image contained more + than 256 colors, only the first 256 where stored in the + color table. Bug reported by higuchi@cov.tytlabs.co.jp + +8/9/2000 Upgraded libpng to version 1.0.8 + +8/11/2000 Fixed Postscript handling when the image size is larger + than the default page size. BUG-report and fix suggestion + by Carlos Vidal. + +8/12/2000 Made PNG handler independant of the png_init_io() function + and stdio; some libpng versions (e.g. the official dll's + for Windows from the PNG group) lack this function + (and for a good reason............). + +8/12/2000 Removed the patches subdirectory from the distribution. If + you are able to install the patches, you are also able to + install Tcl 8.3.2 (or higher), which is a much better idea. + +----------------- Released 1.2.4, 8/13/2000 ----------------------- diff --git a/compat/dlfcn.h b/compat/dlfcn.h new file mode 100755 index 0000000..b91fdb3 --- /dev/null +++ b/compat/dlfcn.h @@ -0,0 +1,52 @@ +/* + * dlfcn.h -- + * + * This file provides a replacement for the header file "dlfcn.h" + * on systems where dlfcn.h is missing. It's primary use is for + * AIX, where Tcl emulates the dl library. + * + * This file is subject to the following copyright notice, which is + * different from the notice used elsewhere in Tcl but rougly + * equivalent in meaning. + * + * Copyright (c) 1992,1993,1995,1996, Jens-Uwe Mager, Helios Software GmbH + * Not derived from licensed software. + * + * Permission is granted to freely use, copy, modify, and redistribute + * this software, provided that the author is not construed to be liable + * for any results of using the software, alterations are clearly marked + * as such, and this notice is not modified. + * + * SCCS: @(#) dlfcn.h 1.3 96/08/01 17:01:16 + */ + +/* + * @(#)dlfcn.h 1.4 revision of 95/04/25 09:36:52 + * This is an unpublished work copyright (c) 1992 HELIOS Software GmbH + * 30159 Hannover, Germany + */ + +#ifndef __dlfcn_h__ +#define __dlfcn_h__ + +#ifdef __cplusplus +extern "C" { +#endif + +/* + * Mode flags for the dlopen routine. + */ +#define RTLD_LAZY 1 /* lazy function call binding */ +#define RTLD_NOW 2 /* immediate function call binding */ +#define RTLD_GLOBAL 0x100 /* allow symbols to be global */ + +void *dlopen (const char *path, int mode); +void *dlsym (void *handle, const char *symbol); +char *dlerror (void); +int dlclose (void *handle); + +#ifdef __cplusplus +} +#endif + +#endif /* __dlfcn_h__ */ diff --git a/compat/dllEntry.c b/compat/dllEntry.c new file mode 100755 index 0000000..193c8e7 --- /dev/null +++ b/compat/dllEntry.c @@ -0,0 +1,61 @@ +/* + * dllEntry.c + */ + +#define WIN32_LEAN_AND_MEAN +#include +#undef WIN32_LEAN_AND_MEAN + + +/* + *---------------------------------------------------------------------- + * + * DllEntryPoint -- + * + * This routine is called by Borland to invoke the + * initialization code for the library. + * + * Results: + * TRUE. + * + * Side effects: + * See DllMain. + * + *---------------------------------------------------------------------- + */ + +BOOL APIENTRY +DllEntryPoint( + HINSTANCE hInst, /* Library instance handle. */ + DWORD reason, /* Reason this function is being called. */ + LPVOID reserved) /* Not used. */ +{ + return TRUE; +} + +/* + *---------------------------------------------------------------------- + * + * DllMain -- + * + * This routine is called by the VC++ C run time library init + * code invoke the initialization code for the library. + * + * Results: + * TRUE. + * + * Side effects: + * None. + * + *---------------------------------------------------------------------- + */ + +BOOL APIENTRY +DllMain( + HINSTANCE hInst, /* Library instance handle. */ + DWORD reason, /* Reason this function is being called. */ + LPVOID reserved) /* Not used. */ +{ + return TRUE; +} + diff --git a/compat/libjpeg/Makefile.am b/compat/libjpeg/Makefile.am new file mode 100755 index 0000000..d7e0bd2 --- /dev/null +++ b/compat/libjpeg/Makefile.am @@ -0,0 +1,134 @@ +## Process this file with automake to produce Makefile.in +# +# Automake Makefile for the JPEG library +# +# This file is written by Bob Friesenhahn, Guido Vollbeding +# + +# Sources to build library +LIBSOURCES = jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c @MEMORYMGR@.c + +# System dependent sources +SYSDEPSOURCES = jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c + +# Headers which are installed to support the library +INSTINCLUDES = jerror.h jmorecfg.h jpeglib.h + +# Headers which are not installed +OTHERINCLUDES = cderror.h cdjpeg.h jdct.h jinclude.h jmemsys.h jpegint.h \ + jversion.h transupp.h + +# Manual pages (Automake uses 'MANS' for itself) +DISTMANS= cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 wrjpgcom.1 + +# Other documentation files +DOCS= README install.txt usage.txt wizard.txt example.c libjpeg.txt \ + structure.txt coderules.txt filelist.txt change.log + +# Makefiles for various systems +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 \ + makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \ + makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 \ + makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 \ + makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 \ + makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 \ + makejsln.v10 makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 \ + makecfil.v10 makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 \ + makervcx.v10 makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac \ + makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st makefile.manx \ + makefile.sas makefile.mms makefile.vms makvms.opt + +# Configuration files +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms + +# Support scripts for configure +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \ + missing ar-lib + +# Miscellaneous support files +OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map + +# Test support files +TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ + testimgp.jpg + +# libtool libraries to build +lib_LTLIBRARIES = libjpeg.la + +# Library sources for libjpeg.la +libjpeg_la_SOURCES = $(LIBSOURCES) + +# LDFLAGS for libjpeg.la +libjpeg_la_LDFLAGS = -no-undefined \ + -version-info $(JPEG_LIB_VERSION) + +if HAVE_LD_VERSION_SCRIPT + libjpeg_la_LDFLAGS += -Wl,--version-script=$(srcdir)/libjpeg.map +endif + +# Executables to build +bin_PROGRAMS = cjpeg djpeg jpegtran rdjpgcom wrjpgcom + +# Executable sources & libs +cjpeg_SOURCES = cjpeg.c rdppm.c rdgif.c rdtarga.c rdrle.c rdbmp.c \ + rdswitch.c cdjpeg.c +cjpeg_LDADD = libjpeg.la +djpeg_SOURCES = djpeg.c wrppm.c wrgif.c wrtarga.c wrrle.c wrbmp.c \ + rdcolmap.c cdjpeg.c +djpeg_LDADD = libjpeg.la +jpegtran_SOURCES = jpegtran.c rdswitch.c cdjpeg.c transupp.c +jpegtran_LDADD = libjpeg.la +rdjpgcom_SOURCES = rdjpgcom.c +wrjpgcom_SOURCES = wrjpgcom.c + +# Manual pages to install +man_MANS = $(DISTMANS) + +# Headers to install +include_HEADERS = $(INSTINCLUDES) + +# Other distributed headers +noinst_HEADERS = $(OTHERINCLUDES) + +# Other distributed files +EXTRA_DIST = $(DOCS) $(DISTMANS) $(MKFILES) $(CONFIGFILES) $(SYSDEPSOURCES) \ + $(OTHERFILES) $(TESTFILES) + +# Files to be cleaned +CLEANFILES = testout.ppm testout.bmp testout.jpg testoutp.ppm testoutp.jpg \ + testoutt.jpg + +# Install jconfig.h +install-data-local: + $(mkinstalldirs) $(DESTDIR)$(includedir) + $(INSTALL_HEADER) jconfig.h $(DESTDIR)$(includedir)/jconfig.h + +# Uninstall jconfig.h +uninstall-local: + rm -f $(DESTDIR)$(includedir)/jconfig.h + +# Run tests +test: check-local +check-local: + rm -f testout* + ./djpeg -dct int -ppm -outfile testout.ppm $(srcdir)/testorig.jpg + ./djpeg -dct int -bmp -colors 256 -outfile testout.bmp $(srcdir)/testorig.jpg + ./cjpeg -dct int -outfile testout.jpg $(srcdir)/testimg.ppm + ./djpeg -dct int -ppm -outfile testoutp.ppm $(srcdir)/testprog.jpg + ./cjpeg -dct int -progressive -opt -outfile testoutp.jpg $(srcdir)/testimg.ppm + ./jpegtran -outfile testoutt.jpg $(srcdir)/testprog.jpg + cmp $(srcdir)/testimg.ppm testout.ppm + cmp $(srcdir)/testimg.bmp testout.bmp + cmp $(srcdir)/testimg.jpg testout.jpg + cmp $(srcdir)/testimg.ppm testoutp.ppm + cmp $(srcdir)/testimgp.jpg testoutp.jpg + cmp $(srcdir)/testorig.jpg testoutt.jpg diff --git a/compat/libjpeg/Makefile.in b/compat/libjpeg/Makefile.in new file mode 100755 index 0000000..7628676 --- /dev/null +++ b/compat/libjpeg/Makefile.in @@ -0,0 +1,1039 @@ +# Makefile.in generated by automake 1.15 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2014 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# +# Automake Makefile for the JPEG library +# +# This file is written by Bob Friesenhahn, Guido Vollbeding +# + + + +VPATH = @srcdir@ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +target_triplet = @target@ +@HAVE_LD_VERSION_SCRIPT_TRUE@am__append_1 = -Wl,--version-script=$(srcdir)/libjpeg.map +bin_PROGRAMS = cjpeg$(EXEEXT) djpeg$(EXEEXT) jpegtran$(EXEEXT) \ + rdjpgcom$(EXEEXT) wrjpgcom$(EXEEXT) +subdir = . +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ + $(am__configure_deps) $(include_HEADERS) $(noinst_HEADERS) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno config.status.lineno +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = jconfig.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" \ + "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(includedir)" +LTLIBRARIES = $(lib_LTLIBRARIES) +libjpeg_la_LIBADD = +am__objects_1 = jaricom.lo jcapimin.lo jcapistd.lo jcarith.lo \ + jccoefct.lo jccolor.lo jcdctmgr.lo jchuff.lo jcinit.lo \ + jcmainct.lo jcmarker.lo jcmaster.lo jcomapi.lo jcparam.lo \ + jcprepct.lo jcsample.lo jctrans.lo jdapimin.lo jdapistd.lo \ + jdarith.lo jdatadst.lo jdatasrc.lo jdcoefct.lo jdcolor.lo \ + jddctmgr.lo jdhuff.lo jdinput.lo jdmainct.lo jdmarker.lo \ + jdmaster.lo jdmerge.lo jdpostct.lo jdsample.lo jdtrans.lo \ + jerror.lo jfdctflt.lo jfdctfst.lo jfdctint.lo jidctflt.lo \ + jidctfst.lo jidctint.lo jquant1.lo jquant2.lo jutils.lo \ + jmemmgr.lo @MEMORYMGR@.lo +am_libjpeg_la_OBJECTS = $(am__objects_1) +libjpeg_la_OBJECTS = $(am_libjpeg_la_OBJECTS) +AM_V_lt = $(am__v_lt_@AM_V@) +am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) +am__v_lt_0 = --silent +am__v_lt_1 = +libjpeg_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(libjpeg_la_LDFLAGS) $(LDFLAGS) -o $@ +PROGRAMS = $(bin_PROGRAMS) +am_cjpeg_OBJECTS = cjpeg.$(OBJEXT) rdppm.$(OBJEXT) rdgif.$(OBJEXT) \ + rdtarga.$(OBJEXT) rdrle.$(OBJEXT) rdbmp.$(OBJEXT) \ + rdswitch.$(OBJEXT) cdjpeg.$(OBJEXT) +cjpeg_OBJECTS = $(am_cjpeg_OBJECTS) +cjpeg_DEPENDENCIES = libjpeg.la +am_djpeg_OBJECTS = djpeg.$(OBJEXT) wrppm.$(OBJEXT) wrgif.$(OBJEXT) \ + wrtarga.$(OBJEXT) wrrle.$(OBJEXT) wrbmp.$(OBJEXT) \ + rdcolmap.$(OBJEXT) cdjpeg.$(OBJEXT) +djpeg_OBJECTS = $(am_djpeg_OBJECTS) +djpeg_DEPENDENCIES = libjpeg.la +am_jpegtran_OBJECTS = jpegtran.$(OBJEXT) rdswitch.$(OBJEXT) \ + cdjpeg.$(OBJEXT) transupp.$(OBJEXT) +jpegtran_OBJECTS = $(am_jpegtran_OBJECTS) +jpegtran_DEPENDENCIES = libjpeg.la +am_rdjpgcom_OBJECTS = rdjpgcom.$(OBJEXT) +rdjpgcom_OBJECTS = $(am_rdjpgcom_OBJECTS) +rdjpgcom_LDADD = $(LDADD) +am_wrjpgcom_OBJECTS = wrjpgcom.$(OBJEXT) +wrjpgcom_OBJECTS = $(am_wrjpgcom_OBJECTS) +wrjpgcom_LDADD = $(LDADD) +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +DEFAULT_INCLUDES = -I.@am__isrc@ +depcomp = $(SHELL) $(top_srcdir)/depcomp +am__depfiles_maybe = depfiles +am__mv = mv -f +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(CFLAGS) +AM_V_CC = $(am__v_CC_@AM_V@) +am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) +am__v_CC_0 = @echo " CC " $@; +am__v_CC_1 = +CCLD = $(CC) +LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_CCLD = $(am__v_CCLD_@AM_V@) +am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) +am__v_CCLD_0 = @echo " CCLD " $@; +am__v_CCLD_1 = +SOURCES = $(libjpeg_la_SOURCES) $(cjpeg_SOURCES) $(djpeg_SOURCES) \ + $(jpegtran_SOURCES) $(rdjpgcom_SOURCES) $(wrjpgcom_SOURCES) +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +man1dir = $(mandir)/man1 +NROFF = nroff +MANS = $(man_MANS) +HEADERS = $(include_HEADERS) $(noinst_HEADERS) +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ + $(LISP)jconfig.cfg +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` +ETAGS = etags +CTAGS = ctags +CSCOPE = cscope +AM_RECURSIVE_TARGETS = cscope +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +JPEG_LIB_VERSION = @JPEG_LIB_VERSION@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MEMORYMGR = @MEMORYMGR@ +MKDIR_P = @MKDIR_P@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +RANLIB = @RANLIB@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +VERSION = @VERSION@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target = @target@ +target_alias = @target_alias@ +target_cpu = @target_cpu@ +target_os = @target_os@ +target_vendor = @target_vendor@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ + +# Sources to build library +LIBSOURCES = jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c @MEMORYMGR@.c + + +# System dependent sources +SYSDEPSOURCES = jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c + +# Headers which are installed to support the library +INSTINCLUDES = jerror.h jmorecfg.h jpeglib.h + +# Headers which are not installed +OTHERINCLUDES = cderror.h cdjpeg.h jdct.h jinclude.h jmemsys.h jpegint.h \ + jversion.h transupp.h + + +# Manual pages (Automake uses 'MANS' for itself) +DISTMANS = cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 wrjpgcom.1 + +# Other documentation files +DOCS = README install.txt usage.txt wizard.txt example.c libjpeg.txt \ + structure.txt coderules.txt filelist.txt change.log + + +# Makefiles for various systems +MKFILES = configure Makefile.in makefile.ansi makefile.unix makefile.b32 \ + makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \ + makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 \ + makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 \ + makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 \ + makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 \ + makejsln.v10 makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 \ + makecfil.v10 makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 \ + makervcx.v10 makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac \ + makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st makefile.manx \ + makefile.sas makefile.mms makefile.vms makvms.opt + + +# Configuration files +CONFIGFILES = jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms + + +# Support scripts for configure +CONFIGUREFILES = config.guess config.sub install-sh ltmain.sh depcomp \ + missing ar-lib + + +# Miscellaneous support files +OTHERFILES = jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map + +# Test support files +TESTFILES = testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ + testimgp.jpg + + +# libtool libraries to build +lib_LTLIBRARIES = libjpeg.la + +# Library sources for libjpeg.la +libjpeg_la_SOURCES = $(LIBSOURCES) + +# LDFLAGS for libjpeg.la +libjpeg_la_LDFLAGS = -no-undefined -version-info $(JPEG_LIB_VERSION) \ + $(am__append_1) + +# Executable sources & libs +cjpeg_SOURCES = cjpeg.c rdppm.c rdgif.c rdtarga.c rdrle.c rdbmp.c \ + rdswitch.c cdjpeg.c + +cjpeg_LDADD = libjpeg.la +djpeg_SOURCES = djpeg.c wrppm.c wrgif.c wrtarga.c wrrle.c wrbmp.c \ + rdcolmap.c cdjpeg.c + +djpeg_LDADD = libjpeg.la +jpegtran_SOURCES = jpegtran.c rdswitch.c cdjpeg.c transupp.c +jpegtran_LDADD = libjpeg.la +rdjpgcom_SOURCES = rdjpgcom.c +wrjpgcom_SOURCES = wrjpgcom.c + +# Manual pages to install +man_MANS = $(DISTMANS) + +# Headers to install +include_HEADERS = $(INSTINCLUDES) + +# Other distributed headers +noinst_HEADERS = $(OTHERINCLUDES) + +# Other distributed files +EXTRA_DIST = $(DOCS) $(DISTMANS) $(MKFILES) $(CONFIGFILES) $(SYSDEPSOURCES) \ + $(OTHERFILES) $(TESTFILES) + + +# Files to be cleaned +CLEANFILES = testout.ppm testout.bmp testout.jpg testoutp.ppm testoutp.jpg \ + testoutt.jpg + +all: jconfig.h + $(MAKE) $(AM_MAKEFLAGS) all-am + +.SUFFIXES: +.SUFFIXES: .c .lo .o .obj +am--refresh: Makefile + @: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ + $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + $(am__cd) $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) +$(am__aclocal_m4_deps): + +jconfig.h: stamp-h1 + @test -f $@ || rm -f stamp-h1 + @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 + +stamp-h1: $(srcdir)/jconfig.cfg $(top_builddir)/config.status + @rm -f stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status jconfig.h +$(srcdir)/jconfig.cfg: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) + rm -f stamp-h1 + touch $@ + +distclean-hdr: + -rm -f jconfig.h stamp-h1 + +install-libLTLIBRARIES: $(lib_LTLIBRARIES) + @$(NORMAL_INSTALL) + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + list2=; for p in $$list; do \ + if test -f $$p; then \ + list2="$$list2 $$p"; \ + else :; fi; \ + done; \ + test -z "$$list2" || { \ + echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ + } + +uninstall-libLTLIBRARIES: + @$(NORMAL_UNINSTALL) + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + for p in $$list; do \ + $(am__strip_dir) \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ + done + +clean-libLTLIBRARIES: + -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) + @list='$(lib_LTLIBRARIES)'; \ + locs=`for p in $$list; do echo $$p; done | \ + sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ + sort -u`; \ + test -z "$$locs" || { \ + echo rm -f $${locs}; \ + rm -f $${locs}; \ + } + +libjpeg.la: $(libjpeg_la_OBJECTS) $(libjpeg_la_DEPENDENCIES) $(EXTRA_libjpeg_la_DEPENDENCIES) + $(AM_V_CCLD)$(libjpeg_la_LINK) -rpath $(libdir) $(libjpeg_la_OBJECTS) $(libjpeg_la_LIBADD) $(LIBS) +install-binPROGRAMS: $(bin_PROGRAMS) + @$(NORMAL_INSTALL) + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ + fi; \ + for p in $$list; do echo "$$p $$p"; done | \ + sed 's/$(EXEEXT)$$//' | \ + while read p p1; do if test -f $$p \ + || test -f $$p1 \ + ; then echo "$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n;h' \ + -e 's|.*|.|' \ + -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ + sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) files[d] = files[d] " " $$1; \ + else { print "f", $$3 "/" $$4, $$1; } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ + $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ + } \ + ; done + +uninstall-binPROGRAMS: + @$(NORMAL_UNINSTALL) + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ + -e 's/$$/$(EXEEXT)/' \ + `; \ + test -n "$$list" || exit 0; \ + echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(bindir)" && rm -f $$files + +clean-binPROGRAMS: + @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list + +cjpeg$(EXEEXT): $(cjpeg_OBJECTS) $(cjpeg_DEPENDENCIES) $(EXTRA_cjpeg_DEPENDENCIES) + @rm -f cjpeg$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(cjpeg_OBJECTS) $(cjpeg_LDADD) $(LIBS) + +djpeg$(EXEEXT): $(djpeg_OBJECTS) $(djpeg_DEPENDENCIES) $(EXTRA_djpeg_DEPENDENCIES) + @rm -f djpeg$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(djpeg_OBJECTS) $(djpeg_LDADD) $(LIBS) + +jpegtran$(EXEEXT): $(jpegtran_OBJECTS) $(jpegtran_DEPENDENCIES) $(EXTRA_jpegtran_DEPENDENCIES) + @rm -f jpegtran$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(jpegtran_OBJECTS) $(jpegtran_LDADD) $(LIBS) + +rdjpgcom$(EXEEXT): $(rdjpgcom_OBJECTS) $(rdjpgcom_DEPENDENCIES) $(EXTRA_rdjpgcom_DEPENDENCIES) + @rm -f rdjpgcom$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(rdjpgcom_OBJECTS) $(rdjpgcom_LDADD) $(LIBS) + +wrjpgcom$(EXEEXT): $(wrjpgcom_OBJECTS) $(wrjpgcom_DEPENDENCIES) $(EXTRA_wrjpgcom_DEPENDENCIES) + @rm -f wrjpgcom$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(wrjpgcom_OBJECTS) $(wrjpgcom_LDADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/@MEMORYMGR@.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cdjpeg.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cjpeg.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/djpeg.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jaricom.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcapimin.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcapistd.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcarith.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jccoefct.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jccolor.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcdctmgr.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jchuff.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcinit.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcmainct.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcmarker.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcmaster.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcomapi.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcparam.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcprepct.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcsample.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jctrans.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdapimin.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdapistd.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdarith.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdatadst.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdatasrc.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdcoefct.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdcolor.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jddctmgr.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdhuff.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdinput.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdmainct.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdmarker.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdmaster.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdmerge.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdpostct.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdsample.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdtrans.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jerror.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jfdctflt.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jfdctfst.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jfdctint.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jidctflt.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jidctfst.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jidctint.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jmemmgr.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jpegtran.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jquant1.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jquant2.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jutils.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdbmp.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdcolmap.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdgif.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdjpgcom.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdppm.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdrle.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdswitch.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdtarga.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/transupp.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrbmp.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrgif.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrjpgcom.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrppm.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrrle.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrtarga.Po@am__quote@ + +.c.o: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< + +.c.obj: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` + +.c.lo: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool config.lt +install-man1: $(man_MANS) + @$(NORMAL_INSTALL) + @list1=''; \ + list2='$(man_MANS)'; \ + test -n "$(man1dir)" \ + && test -n "`echo $$list1$$list2`" \ + || exit 0; \ + echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \ + { for i in $$list1; do echo "$$i"; done; \ + if test -n "$$list2"; then \ + for i in $$list2; do echo "$$i"; done \ + | sed -n '/\.1[a-z]*$$/p'; \ + fi; \ + } | while read p; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; echo "$$p"; \ + done | \ + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ + sed 'N;N;s,\n, ,g' | { \ + list=; while read file base inst; do \ + if test "$$base" = "$$inst"; then list="$$list $$file"; else \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ + fi; \ + done; \ + for i in $$list; do echo "$$i"; done | $(am__base_list) | \ + while read files; do \ + test -z "$$files" || { \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ + done; } + +uninstall-man1: + @$(NORMAL_UNINSTALL) + @list=''; test -n "$(man1dir)" || exit 0; \ + files=`{ for i in $$list; do echo "$$i"; done; \ + l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ + sed -n '/\.1[a-z]*$$/p'; \ + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ + dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir) +install-includeHEADERS: $(include_HEADERS) + @$(NORMAL_INSTALL) + @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(includedir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(includedir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \ + $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \ + done + +uninstall-includeHEADERS: + @$(NORMAL_UNINSTALL) + @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir) + +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-am +TAGS: tags + +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + set x; \ + here=`pwd`; \ + $(am__define_uniq_tagged_files); \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: ctags-am + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" +cscope: cscope.files + test ! -s cscope.files \ + || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) +clean-cscope: + -rm -f cscope.files +cscope.files: clean-cscope cscopelist +cscopelist: cscopelist-am + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + -rm -f cscope.out cscope.in.out cscope.po.out cscope.files +check-am: all-am + $(MAKE) $(AM_MAKEFLAGS) check-local +check: check-am +all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(MANS) $(HEADERS) \ + jconfig.h +install-binPROGRAMS: install-libLTLIBRARIES + +installdirs: + for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(includedir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \ + clean-libtool mostlyclean-am + +distclean: distclean-am + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-hdr distclean-libtool distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-data-local install-includeHEADERS install-man + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: install-binPROGRAMS install-libLTLIBRARIES + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: install-man1 + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-binPROGRAMS uninstall-includeHEADERS \ + uninstall-libLTLIBRARIES uninstall-local uninstall-man + +uninstall-man: uninstall-man1 + +.MAKE: all check-am install-am install-strip + +.PHONY: CTAGS GTAGS TAGS all all-am am--refresh check check-am \ + check-local clean clean-binPROGRAMS clean-cscope clean-generic \ + clean-libLTLIBRARIES clean-libtool cscope cscopelist-am ctags \ + ctags-am distclean distclean-compile distclean-generic \ + distclean-hdr distclean-libtool distclean-tags dvi dvi-am html \ + html-am info info-am install install-am install-binPROGRAMS \ + install-data install-data-am install-data-local install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-includeHEADERS install-info \ + install-info-am install-libLTLIBRARIES install-man \ + install-man1 install-pdf install-pdf-am install-ps \ + install-ps-am install-strip installcheck installcheck-am \ + installdirs maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ + uninstall-am uninstall-binPROGRAMS uninstall-includeHEADERS \ + uninstall-libLTLIBRARIES uninstall-local uninstall-man \ + uninstall-man1 + +.PRECIOUS: Makefile + + +# Install jconfig.h +install-data-local: + $(mkinstalldirs) $(DESTDIR)$(includedir) + $(INSTALL_HEADER) jconfig.h $(DESTDIR)$(includedir)/jconfig.h + +# Uninstall jconfig.h +uninstall-local: + rm -f $(DESTDIR)$(includedir)/jconfig.h + +# Run tests +test: check-local +check-local: + rm -f testout* + ./djpeg -dct int -ppm -outfile testout.ppm $(srcdir)/testorig.jpg + ./djpeg -dct int -bmp -colors 256 -outfile testout.bmp $(srcdir)/testorig.jpg + ./cjpeg -dct int -outfile testout.jpg $(srcdir)/testimg.ppm + ./djpeg -dct int -ppm -outfile testoutp.ppm $(srcdir)/testprog.jpg + ./cjpeg -dct int -progressive -opt -outfile testoutp.jpg $(srcdir)/testimg.ppm + ./jpegtran -outfile testoutt.jpg $(srcdir)/testprog.jpg + cmp $(srcdir)/testimg.ppm testout.ppm + cmp $(srcdir)/testimg.bmp testout.bmp + cmp $(srcdir)/testimg.jpg testout.jpg + cmp $(srcdir)/testimg.ppm testoutp.ppm + cmp $(srcdir)/testimgp.jpg testoutp.jpg + cmp $(srcdir)/testorig.jpg testoutt.jpg + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/compat/libjpeg/README b/compat/libjpeg/README new file mode 100755 index 0000000..0b5e097 --- /dev/null +++ b/compat/libjpeg/README @@ -0,0 +1,375 @@ +The Independent JPEG Group's JPEG software +========================================== + +README for release 9b of 17-Jan-2016 +==================================== + +This distribution contains the ninth public release of the Independent JPEG +Group's free JPEG software. You are welcome to redistribute this software and +to use it for any purpose, subject to the conditions under LEGAL ISSUES, below. + +This software is the work of Tom Lane, Guido Vollbeding, Philip Gladstone, +Bill Allombert, Jim Boucher, Lee Crocker, Bob Friesenhahn, Ben Jackson, +Julian Minguillon, Luis Ortiz, George Phillips, Davide Rossi, Ge' Weijers, +and other members of the Independent JPEG Group. + +IJG is not affiliated with the ISO/IEC JTC1/SC29/WG1 standards committee +(previously known as JPEG, together with ITU-T SG16). + + +DOCUMENTATION ROADMAP +===================== + +This file contains the following sections: + +OVERVIEW General description of JPEG and the IJG software. +LEGAL ISSUES Copyright, lack of warranty, terms of distribution. +REFERENCES Where to learn more about JPEG. +ARCHIVE LOCATIONS Where to find newer versions of this software. +ACKNOWLEDGMENTS Special thanks. +FILE FORMAT WARS Software *not* to get. +TO DO Plans for future IJG releases. + +Other documentation files in the distribution are: + +User documentation: + install.txt How to configure and install the IJG software. + usage.txt Usage instructions for cjpeg, djpeg, jpegtran, + rdjpgcom, and wrjpgcom. + *.1 Unix-style man pages for programs (same info as usage.txt). + wizard.txt Advanced usage instructions for JPEG wizards only. + change.log Version-to-version change highlights. +Programmer and internal documentation: + libjpeg.txt How to use the JPEG library in your own programs. + example.c Sample code for calling the JPEG library. + structure.txt Overview of the JPEG library's internal structure. + filelist.txt Road map of IJG files. + coderules.txt Coding style rules --- please read if you contribute code. + +Please read at least the files install.txt and usage.txt. Some information +can also be found in the JPEG FAQ (Frequently Asked Questions) article. See +ARCHIVE LOCATIONS below to find out where to obtain the FAQ article. + +If you want to understand how the JPEG code works, we suggest reading one or +more of the REFERENCES, then looking at the documentation files (in roughly +the order listed) before diving into the code. + + +OVERVIEW +======== + +This package contains C software to implement JPEG image encoding, decoding, +and transcoding. JPEG (pronounced "jay-peg") is a standardized compression +method for full-color and grayscale images. + +This software implements JPEG baseline, extended-sequential, and progressive +compression processes. Provision is made for supporting all variants of these +processes, although some uncommon parameter settings aren't implemented yet. +We have made no provision for supporting the hierarchical or lossless +processes defined in the standard. + +We provide a set of library routines for reading and writing JPEG image files, +plus two sample applications "cjpeg" and "djpeg", which use the library to +perform conversion between JPEG and some other popular image file formats. +The library is intended to be reused in other applications. + +In order to support file conversion and viewing software, we have included +considerable functionality beyond the bare JPEG coding/decoding capability; +for example, the color quantization modules are not strictly part of JPEG +decoding, but they are essential for output to colormapped file formats or +colormapped displays. These extra functions can be compiled out of the +library if not required for a particular application. + +We have also included "jpegtran", a utility for lossless transcoding between +different JPEG processes, and "rdjpgcom" and "wrjpgcom", two simple +applications for inserting and extracting textual comments in JFIF files. + +The emphasis in designing this software has been on achieving portability and +flexibility, while also making it fast enough to be useful. In particular, +the software is not intended to be read as a tutorial on JPEG. (See the +REFERENCES section for introductory material.) Rather, it is intended to +be reliable, portable, industrial-strength code. We do not claim to have +achieved that goal in every aspect of the software, but we strive for it. + +We welcome the use of this software as a component of commercial products. +No royalty is required, but we do ask for an acknowledgement in product +documentation, as described under LEGAL ISSUES. + + +LEGAL ISSUES +============ + +In plain English: + +1. We don't promise that this software works. (But if you find any bugs, + please let us know!) +2. You can use this software for whatever you want. You don't have to pay us. +3. You may not pretend that you wrote this software. If you use it in a + program, you must acknowledge somewhere in your documentation that + you've used the IJG code. + +In legalese: + +The authors make NO WARRANTY or representation, either express or implied, +with respect to this software, its quality, accuracy, merchantability, or +fitness for a particular purpose. This software is provided "AS IS", and you, +its user, assume the entire risk as to its quality and accuracy. + +This software is copyright (C) 1991-2016, Thomas G. Lane, Guido Vollbeding. +All Rights Reserved except as specified below. + +Permission is hereby granted to use, copy, modify, and distribute this +software (or portions thereof) for any purpose, without fee, subject to these +conditions: +(1) If any part of the source code for this software is distributed, then this +README file must be included, with this copyright and no-warranty notice +unaltered; and any additions, deletions, or changes to the original files +must be clearly indicated in accompanying documentation. +(2) If only executable code is distributed, then the accompanying +documentation must state that "this software is based in part on the work of +the Independent JPEG Group". +(3) Permission for use of this software is granted only if the user accepts +full responsibility for any undesirable consequences; the authors accept +NO LIABILITY for damages of any kind. + +These conditions apply to any software derived from or based on the IJG code, +not just to the unmodified library. If you use our work, you ought to +acknowledge us. + +Permission is NOT granted for the use of any IJG author's name or company name +in advertising or publicity relating to this software or products derived from +it. This software may be referred to only as "the Independent JPEG Group's +software". + +We specifically permit and encourage the use of this software as the basis of +commercial products, provided that all warranty or liability claims are +assumed by the product vendor. + + +The Unix configuration script "configure" was produced with GNU Autoconf. +It is copyright by the Free Software Foundation but is freely distributable. +The same holds for its supporting scripts (config.guess, config.sub, +ltmain.sh). Another support script, install-sh, is copyright by X Consortium +but is also freely distributable. + +The IJG distribution formerly included code to read and write GIF files. +To avoid entanglement with the Unisys LZW patent (now expired), GIF reading +support has been removed altogether, and the GIF writer has been simplified +to produce "uncompressed GIFs". This technique does not use the LZW +algorithm; the resulting GIF files are larger than usual, but are readable +by all standard GIF decoders. + + +REFERENCES +========== + +We recommend reading one or more of these references before trying to +understand the innards of the JPEG software. + +The best short technical introduction to the JPEG compression algorithm is + Wallace, Gregory K. "The JPEG Still Picture Compression Standard", + Communications of the ACM, April 1991 (vol. 34 no. 4), pp. 30-44. +(Adjacent articles in that issue discuss MPEG motion picture compression, +applications of JPEG, and related topics.) If you don't have the CACM issue +handy, a PDF file containing a revised version of Wallace's article is +available at http://www.ijg.org/files/Wallace.JPEG.pdf. The file (actually +a preprint for an article that appeared in IEEE Trans. Consumer Electronics) +omits the sample images that appeared in CACM, but it includes corrections +and some added material. Note: the Wallace article is copyright ACM and IEEE, +and it may not be used for commercial purposes. + +A somewhat less technical, more leisurely introduction to JPEG can be found in +"The Data Compression Book" by Mark Nelson and Jean-loup Gailly, published by +M&T Books (New York), 2nd ed. 1996, ISBN 1-55851-434-1. This book provides +good explanations and example C code for a multitude of compression methods +including JPEG. It is an excellent source if you are comfortable reading C +code but don't know much about data compression in general. The book's JPEG +sample code is far from industrial-strength, but when you are ready to look +at a full implementation, you've got one here... + +The best currently available description of JPEG is the textbook "JPEG Still +Image Data Compression Standard" by William B. Pennebaker and Joan L. +Mitchell, published by Van Nostrand Reinhold, 1993, ISBN 0-442-01272-1. +Price US$59.95, 638 pp. The book includes the complete text of the ISO JPEG +standards (DIS 10918-1 and draft DIS 10918-2). +Although this is by far the most detailed and comprehensive exposition of +JPEG publicly available, we point out that it is still missing an explanation +of the most essential properties and algorithms of the underlying DCT +technology. +If you think that you know about DCT-based JPEG after reading this book, +then you are in delusion. The real fundamentals and corresponding potential +of DCT-based JPEG are not publicly known so far, and that is the reason for +all the mistaken developments taking place in the image coding domain. + +The original JPEG standard is divided into two parts, Part 1 being the actual +specification, while Part 2 covers compliance testing methods. Part 1 is +titled "Digital Compression and Coding of Continuous-tone Still Images, +Part 1: Requirements and guidelines" and has document numbers ISO/IEC IS +10918-1, ITU-T T.81. Part 2 is titled "Digital Compression and Coding of +Continuous-tone Still Images, Part 2: Compliance testing" and has document +numbers ISO/IEC IS 10918-2, ITU-T T.83. +IJG JPEG 8 introduced an implementation of the JPEG SmartScale extension +which is specified in two documents: A contributed document at ITU and ISO +with title "ITU-T JPEG-Plus Proposal for Extending ITU-T T.81 for Advanced +Image Coding", April 2006, Geneva, Switzerland. The latest version of this +document is Revision 3. And a contributed document ISO/IEC JTC1/SC29/WG1 N +5799 with title "Evolution of JPEG", June/July 2011, Berlin, Germany. +IJG JPEG 9 introduces a reversible color transform for improved lossless +compression which is described in a contributed document ISO/IEC JTC1/SC29/ +WG1 N 6080 with title "JPEG 9 Lossless Coding", June/July 2012, Paris, +France. + +The JPEG standard does not specify all details of an interchangeable file +format. For the omitted details we follow the "JFIF" conventions, version 2. +JFIF version 1 has been adopted as Recommendation ITU-T T.871 (05/2011) : +Information technology - Digital compression and coding of continuous-tone +still images: JPEG File Interchange Format (JFIF). It is available as a +free download in PDF file format from http://www.itu.int/rec/T-REC-T.871. +A PDF file of the older JFIF document is available at +http://www.w3.org/Graphics/JPEG/jfif3.pdf. + +The TIFF 6.0 file format specification can be obtained by FTP from +ftp://ftp.sgi.com/graphics/tiff/TIFF6.ps.gz. The JPEG incorporation scheme +found in the TIFF 6.0 spec of 3-June-92 has a number of serious problems. +IJG does not recommend use of the TIFF 6.0 design (TIFF Compression tag 6). +Instead, we recommend the JPEG design proposed by TIFF Technical Note #2 +(Compression tag 7). Copies of this Note can be obtained from +http://www.ijg.org/files/. It is expected that the next revision +of the TIFF spec will replace the 6.0 JPEG design with the Note's design. +Although IJG's own code does not support TIFF/JPEG, the free libtiff library +uses our library to implement TIFF/JPEG per the Note. + + +ARCHIVE LOCATIONS +================= + +The "official" archive site for this software is www.ijg.org. +The most recent released version can always be found there in +directory "files". This particular version will be archived as +http://www.ijg.org/files/jpegsrc.v9b.tar.gz, and in Windows-compatible +"zip" archive format as http://www.ijg.org/files/jpegsr9b.zip. + +The JPEG FAQ (Frequently Asked Questions) article is a source of some +general information about JPEG. +It is available on the World Wide Web at http://www.faqs.org/faqs/jpeg-faq/ +and other news.answers archive sites, including the official news.answers +archive at rtfm.mit.edu: ftp://rtfm.mit.edu/pub/usenet/news.answers/jpeg-faq/. +If you don't have Web or FTP access, send e-mail to mail-server@rtfm.mit.edu +with body + send usenet/news.answers/jpeg-faq/part1 + send usenet/news.answers/jpeg-faq/part2 + + +ACKNOWLEDGMENTS +=============== + +Thank to Juergen Bruder for providing me with a copy of the common DCT +algorithm article, only to find out that I had come to the same result +in a more direct and comprehensible way with a more generative approach. + +Thank to Istvan Sebestyen and Joan L. Mitchell for inviting me to the +ITU JPEG (Study Group 16) meeting in Geneva, Switzerland. + +Thank to Thomas Wiegand and Gary Sullivan for inviting me to the +Joint Video Team (MPEG & ITU) meeting in Geneva, Switzerland. + +Thank to Thomas Richter and Daniel Lee for inviting me to the +ISO/IEC JTC1/SC29/WG1 (previously known as JPEG, together with ITU-T SG16) +meeting in Berlin, Germany. + +Thank to John Korejwa and Massimo Ballerini for inviting me to +fruitful consultations in Boston, MA and Milan, Italy. + +Thank to Hendrik Elstner, Roland Fassauer, Simone Zuck, Guenther +Maier-Gerber, Walter Stoeber, Fred Schmitz, and Norbert Braunagel +for corresponding business development. + +Thank to Nico Zschach and Dirk Stelling of the technical support team +at the Digital Images company in Halle for providing me with extra +equipment for configuration tests. + +Thank to Richard F. Lyon (then of Foveon Inc.) for fruitful +communication about JPEG configuration in Sigma Photo Pro software. + +Thank to Andrew Finkenstadt for hosting the ijg.org site. + +Last but not least special thank to Thomas G. Lane for the original +design and development of this singular software package. + + +FILE FORMAT WARS +================ + +The ISO/IEC JTC1/SC29/WG1 standards committee (previously known as JPEG, +together with ITU-T SG16) currently promotes different formats containing +the name "JPEG" which is misleading because these formats are incompatible +with original DCT-based JPEG and are based on faulty technologies. +IJG therefore does not and will not support such momentary mistakes +(see REFERENCES). +There exist also distributions under the name "OpenJPEG" promoting such +kind of formats which is misleading because they don't support original +JPEG images. +We have no sympathy for the promotion of inferior formats. Indeed, one of +the original reasons for developing this free software was to help force +convergence on common, interoperable format standards for JPEG files. +Don't use an incompatible file format! +(In any case, our decoder will remain capable of reading existing JPEG +image files indefinitely.) + +The ISO committee pretends to be "responsible for the popular JPEG" in their +public reports which is not true because they don't respond to actual +requirements for the maintenance of the original JPEG specification. +Furthermore, the ISO committee pretends to "ensure interoperability" with +their standards which is not true because their "standards" support only +application-specific and proprietary use cases and contain mathematically +incorrect code. + +There are currently different distributions in circulation containing the +name "libjpeg" which is misleading because they don't have the features and +are incompatible with formats supported by actual IJG libjpeg distributions. +One of those fakes is released by members of the ISO committee and just uses +the name of libjpeg for misdirection of people, similar to the abuse of the +name JPEG as described above, while having nothing in common with actual IJG +libjpeg distributions and containing mathematically incorrect code. +The other one claims to be a "derivative" or "fork" of the original libjpeg, +but violates the license conditions as described under LEGAL ISSUES above +and violates basic C programming properties. +We have no sympathy for the release of misleading, incorrect and illegal +distributions derived from obsolete code bases. +Don't use an obsolete code base! + +According to the UCC (Uniform Commercial Code) law, IJG has the lawful and +legal right to foreclose on certain standardization bodies and other +institutions or corporations that knowingly perform substantial and +systematic deceptive acts and practices, fraud, theft, and damaging of the +value of the people of this planet without their knowing, willing and +intentional consent. +The titles, ownership, and rights of these institutions and all their assets +are now duly secured and held in trust for the free people of this planet. +People of the planet, on every country, may have a financial interest in +the assets of these former principals, agents, and beneficiaries of the +foreclosed institutions and corporations. +IJG asserts what is: that each man, woman, and child has unalienable value +and rights granted and deposited in them by the Creator and not any one of +the people is subordinate to any artificial principality, corporate fiction +or the special interest of another without their appropriate knowing, +willing and intentional consent made by contract or accommodation agreement. +IJG expresses that which already was. +The people have already determined and demanded that public administration +entities, national governments, and their supporting judicial systems must +be fully transparent, accountable, and liable. +IJG has secured the value for all concerned free people of the planet. + +A partial list of foreclosed institutions and corporations ("Hall of Shame") +is currently prepared and will be published later. + + +TO DO +===== + +Version 9 is the second release of a new generation JPEG standard +to overcome the limitations of the original JPEG specification, +and is the first true source reference JPEG codec. +More features are being prepared for coming releases... + +Please send bug reports, offers of help, etc. to jpeg-info@jpegclub.org. diff --git a/compat/libjpeg/aclocal.m4 b/compat/libjpeg/aclocal.m4 new file mode 100755 index 0000000..2329dd1 --- /dev/null +++ b/compat/libjpeg/aclocal.m4 @@ -0,0 +1,10277 @@ +# generated automatically by aclocal 1.15 -*- Autoconf -*- + +# Copyright (C) 1996-2014 Free Software Foundation, Inc. + +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, +[m4_warning([this file was generated for autoconf 2.69. +You have another version of autoconf. It may work, but is not guaranteed to. +If you have problems, you may need to regenerate the build system entirely. +To do so, use the procedure documented by the package, typically 'autoreconf'.])]) + +# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- +# +# Copyright (C) 1996-2001, 2003-2015 Free Software Foundation, Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +m4_define([_LT_COPYING], [dnl +# Copyright (C) 2014 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# GNU Libtool is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of of the License, or +# (at your option) any later version. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program or library that is built +# using GNU Libtool, you may include this file under the same +# distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . +]) + +# serial 58 LT_INIT + + +# LT_PREREQ(VERSION) +# ------------------ +# Complain and exit if this libtool version is less that VERSION. +m4_defun([LT_PREREQ], +[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, + [m4_default([$3], + [m4_fatal([Libtool version $1 or higher is required], + 63)])], + [$2])]) + + +# _LT_CHECK_BUILDDIR +# ------------------ +# Complain if the absolute build directory name contains unusual characters +m4_defun([_LT_CHECK_BUILDDIR], +[case `pwd` in + *\ * | *\ *) + AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; +esac +]) + + +# LT_INIT([OPTIONS]) +# ------------------ +AC_DEFUN([LT_INIT], +[AC_PREREQ([2.62])dnl We use AC_PATH_PROGS_FEATURE_CHECK +AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl +AC_BEFORE([$0], [LT_LANG])dnl +AC_BEFORE([$0], [LT_OUTPUT])dnl +AC_BEFORE([$0], [LTDL_INIT])dnl +m4_require([_LT_CHECK_BUILDDIR])dnl + +dnl Autoconf doesn't catch unexpanded LT_ macros by default: +m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl +m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl +dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 +dnl unless we require an AC_DEFUNed macro: +AC_REQUIRE([LTOPTIONS_VERSION])dnl +AC_REQUIRE([LTSUGAR_VERSION])dnl +AC_REQUIRE([LTVERSION_VERSION])dnl +AC_REQUIRE([LTOBSOLETE_VERSION])dnl +m4_require([_LT_PROG_LTMAIN])dnl + +_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}]) + +dnl Parse OPTIONS +_LT_SET_OPTIONS([$0], [$1]) + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS=$ltmain + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' +AC_SUBST(LIBTOOL)dnl + +_LT_SETUP + +# Only expand once: +m4_define([LT_INIT]) +])# LT_INIT + +# Old names: +AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) +AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_PROG_LIBTOOL], []) +dnl AC_DEFUN([AM_PROG_LIBTOOL], []) + + +# _LT_PREPARE_CC_BASENAME +# ----------------------- +m4_defun([_LT_PREPARE_CC_BASENAME], [ +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +func_cc_basename () +{ + for cc_temp in @S|@*""; do + case $cc_temp in + compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; + distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; + \-*) ;; + *) break;; + esac + done + func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +} +])# _LT_PREPARE_CC_BASENAME + + +# _LT_CC_BASENAME(CC) +# ------------------- +# It would be clearer to call AC_REQUIREs from _LT_PREPARE_CC_BASENAME, +# but that macro is also expanded into generated libtool script, which +# arranges for $SED and $ECHO to be set by different means. +m4_defun([_LT_CC_BASENAME], +[m4_require([_LT_PREPARE_CC_BASENAME])dnl +AC_REQUIRE([_LT_DECL_SED])dnl +AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl +func_cc_basename $1 +cc_basename=$func_cc_basename_result +]) + + +# _LT_FILEUTILS_DEFAULTS +# ---------------------- +# It is okay to use these file commands and assume they have been set +# sensibly after 'm4_require([_LT_FILEUTILS_DEFAULTS])'. +m4_defun([_LT_FILEUTILS_DEFAULTS], +[: ${CP="cp -f"} +: ${MV="mv -f"} +: ${RM="rm -f"} +])# _LT_FILEUTILS_DEFAULTS + + +# _LT_SETUP +# --------- +m4_defun([_LT_SETUP], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl +AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl + +_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl +dnl +_LT_DECL([], [host_alias], [0], [The host system])dnl +_LT_DECL([], [host], [0])dnl +_LT_DECL([], [host_os], [0])dnl +dnl +_LT_DECL([], [build_alias], [0], [The build system])dnl +_LT_DECL([], [build], [0])dnl +_LT_DECL([], [build_os], [0])dnl +dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([LT_PATH_LD])dnl +AC_REQUIRE([LT_PATH_NM])dnl +dnl +AC_REQUIRE([AC_PROG_LN_S])dnl +test -z "$LN_S" && LN_S="ln -s" +_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl +dnl +AC_REQUIRE([LT_CMD_MAX_LEN])dnl +_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl +_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl +dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_CHECK_SHELL_FEATURES])dnl +m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl +m4_require([_LT_CMD_RELOAD])dnl +m4_require([_LT_CHECK_MAGIC_METHOD])dnl +m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl +m4_require([_LT_CMD_OLD_ARCHIVE])dnl +m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl +m4_require([_LT_WITH_SYSROOT])dnl +m4_require([_LT_CMD_TRUNCATE])dnl + +_LT_CONFIG_LIBTOOL_INIT([ +# See if we are running on zsh, and set the options that allow our +# commands through without removal of \ escapes INIT. +if test -n "\${ZSH_VERSION+set}"; then + setopt NO_GLOB_SUBST +fi +]) +if test -n "${ZSH_VERSION+set}"; then + setopt NO_GLOB_SUBST +fi + +_LT_CHECK_OBJDIR + +m4_require([_LT_TAG_COMPILER])dnl + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test set != "${COLLECT_NAMES+set}"; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Global variables: +ofile=libtool +can_build_shared=yes + +# All known linkers require a '.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a + +with_gnu_ld=$lt_cv_prog_gnu_ld + +old_CC=$CC +old_CFLAGS=$CFLAGS + +# Set sane defaults for various variables +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +test -z "$LD" && LD=ld +test -z "$ac_objext" && ac_objext=o + +_LT_CC_BASENAME([$compiler]) + +# Only perform the check for file, if the check method requires it +test -z "$MAGIC_CMD" && MAGIC_CMD=file +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + _LT_PATH_MAGIC + fi + ;; +esac + +# Use C for the default configuration in the libtool script +LT_SUPPORTED_TAG([CC]) +_LT_LANG_C_CONFIG +_LT_LANG_DEFAULT_CONFIG +_LT_CONFIG_COMMANDS +])# _LT_SETUP + + +# _LT_PREPARE_SED_QUOTE_VARS +# -------------------------- +# Define a few sed substitution that help us do robust quoting. +m4_defun([_LT_PREPARE_SED_QUOTE_VARS], +[# Backslashify metacharacters that are still active within +# double-quoted strings. +sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\([["`\\]]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' +]) + +# _LT_PROG_LTMAIN +# --------------- +# Note that this code is called both from 'configure', and 'config.status' +# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, +# 'config.status' has no value for ac_aux_dir unless we are using Automake, +# so we pass a copy along to make sure it has a sensible value anyway. +m4_defun([_LT_PROG_LTMAIN], +[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl +_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) +ltmain=$ac_aux_dir/ltmain.sh +])# _LT_PROG_LTMAIN + + + +# So that we can recreate a full libtool script including additional +# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS +# in macros and then make a single call at the end using the 'libtool' +# label. + + +# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) +# ---------------------------------------- +# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. +m4_define([_LT_CONFIG_LIBTOOL_INIT], +[m4_ifval([$1], + [m4_append([_LT_OUTPUT_LIBTOOL_INIT], + [$1 +])])]) + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_INIT]) + + +# _LT_CONFIG_LIBTOOL([COMMANDS]) +# ------------------------------ +# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. +m4_define([_LT_CONFIG_LIBTOOL], +[m4_ifval([$1], + [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], + [$1 +])])]) + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) + + +# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) +# ----------------------------------------------------- +m4_defun([_LT_CONFIG_SAVE_COMMANDS], +[_LT_CONFIG_LIBTOOL([$1]) +_LT_CONFIG_LIBTOOL_INIT([$2]) +]) + + +# _LT_FORMAT_COMMENT([COMMENT]) +# ----------------------------- +# Add leading comment marks to the start of each line, and a trailing +# full-stop to the whole comment if one is not present already. +m4_define([_LT_FORMAT_COMMENT], +[m4_ifval([$1], [ +m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], + [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) +)]) + + + + + +# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) +# ------------------------------------------------------------------- +# CONFIGNAME is the name given to the value in the libtool script. +# VARNAME is the (base) name used in the configure script. +# VALUE may be 0, 1 or 2 for a computed quote escaped value based on +# VARNAME. Any other value will be used directly. +m4_define([_LT_DECL], +[lt_if_append_uniq([lt_decl_varnames], [$2], [, ], + [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], + [m4_ifval([$1], [$1], [$2])]) + lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) + m4_ifval([$4], + [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) + lt_dict_add_subkey([lt_decl_dict], [$2], + [tagged?], [m4_ifval([$5], [yes], [no])])]) +]) + + +# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) +# -------------------------------------------------------- +m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) + + +# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) +# ------------------------------------------------ +m4_define([lt_decl_tag_varnames], +[_lt_decl_filter([tagged?], [yes], $@)]) + + +# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) +# --------------------------------------------------------- +m4_define([_lt_decl_filter], +[m4_case([$#], + [0], [m4_fatal([$0: too few arguments: $#])], + [1], [m4_fatal([$0: too few arguments: $#: $1])], + [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], + [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], + [lt_dict_filter([lt_decl_dict], $@)])[]dnl +]) + + +# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) +# -------------------------------------------------- +m4_define([lt_decl_quote_varnames], +[_lt_decl_filter([value], [1], $@)]) + + +# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) +# --------------------------------------------------- +m4_define([lt_decl_dquote_varnames], +[_lt_decl_filter([value], [2], $@)]) + + +# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) +# --------------------------------------------------- +m4_define([lt_decl_varnames_tagged], +[m4_assert([$# <= 2])dnl +_$0(m4_quote(m4_default([$1], [[, ]])), + m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]), + m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))]) +m4_define([_lt_decl_varnames_tagged], +[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])]) + + +# lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) +# ------------------------------------------------ +m4_define([lt_decl_all_varnames], +[_$0(m4_quote(m4_default([$1], [[, ]])), + m4_if([$2], [], + m4_quote(lt_decl_varnames), + m4_quote(m4_shift($@))))[]dnl +]) +m4_define([_lt_decl_all_varnames], +[lt_join($@, lt_decl_varnames_tagged([$1], + lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl +]) + + +# _LT_CONFIG_STATUS_DECLARE([VARNAME]) +# ------------------------------------ +# Quote a variable value, and forward it to 'config.status' so that its +# declaration there will have the same value as in 'configure'. VARNAME +# must have a single quote delimited value for this to work. +m4_define([_LT_CONFIG_STATUS_DECLARE], +[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`']) + + +# _LT_CONFIG_STATUS_DECLARATIONS +# ------------------------------ +# We delimit libtool config variables with single quotes, so when +# we write them to config.status, we have to be sure to quote all +# embedded single quotes properly. In configure, this macro expands +# each variable declared with _LT_DECL (and _LT_TAGDECL) into: +# +# ='`$ECHO "$" | $SED "$delay_single_quote_subst"`' +m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], +[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), + [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) + + +# _LT_LIBTOOL_TAGS +# ---------------- +# Output comment and list of tags supported by the script +m4_defun([_LT_LIBTOOL_TAGS], +[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl +available_tags='_LT_TAGS'dnl +]) + + +# _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) +# ----------------------------------- +# Extract the dictionary values for VARNAME (optionally with TAG) and +# expand to a commented shell variable setting: +# +# # Some comment about what VAR is for. +# visible_name=$lt_internal_name +m4_define([_LT_LIBTOOL_DECLARE], +[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], + [description])))[]dnl +m4_pushdef([_libtool_name], + m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl +m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), + [0], [_libtool_name=[$]$1], + [1], [_libtool_name=$lt_[]$1], + [2], [_libtool_name=$lt_[]$1], + [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl +m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl +]) + + +# _LT_LIBTOOL_CONFIG_VARS +# ----------------------- +# Produce commented declarations of non-tagged libtool config variables +# suitable for insertion in the LIBTOOL CONFIG section of the 'libtool' +# script. Tagged libtool config variables (even for the LIBTOOL CONFIG +# section) are produced by _LT_LIBTOOL_TAG_VARS. +m4_defun([_LT_LIBTOOL_CONFIG_VARS], +[m4_foreach([_lt_var], + m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), + [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) + + +# _LT_LIBTOOL_TAG_VARS(TAG) +# ------------------------- +m4_define([_LT_LIBTOOL_TAG_VARS], +[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), + [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) + + +# _LT_TAGVAR(VARNAME, [TAGNAME]) +# ------------------------------ +m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) + + +# _LT_CONFIG_COMMANDS +# ------------------- +# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of +# variables for single and double quote escaping we saved from calls +# to _LT_DECL, we can put quote escaped variables declarations +# into 'config.status', and then the shell code to quote escape them in +# for loops in 'config.status'. Finally, any additional code accumulated +# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. +m4_defun([_LT_CONFIG_COMMANDS], +[AC_PROVIDE_IFELSE([LT_OUTPUT], + dnl If the libtool generation code has been placed in $CONFIG_LT, + dnl instead of duplicating it all over again into config.status, + dnl then we will have config.status run $CONFIG_LT later, so it + dnl needs to know what name is stored there: + [AC_CONFIG_COMMANDS([libtool], + [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], + dnl If the libtool generation code is destined for config.status, + dnl expand the accumulated commands and init code now: + [AC_CONFIG_COMMANDS([libtool], + [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) +])#_LT_CONFIG_COMMANDS + + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], +[ + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +sed_quote_subst='$sed_quote_subst' +double_quote_subst='$double_quote_subst' +delay_variable_subst='$delay_variable_subst' +_LT_CONFIG_STATUS_DECLARATIONS +LTCC='$LTCC' +LTCFLAGS='$LTCFLAGS' +compiler='$compiler_DEFAULT' + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$[]1 +_LTECHO_EOF' +} + +# Quote evaled strings. +for var in lt_decl_all_varnames([[ \ +]], lt_decl_quote_varnames); do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[[\\\\\\\`\\"\\\$]]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +# Double-quote double-evaled strings. +for var in lt_decl_all_varnames([[ \ +]], lt_decl_dquote_varnames); do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[[\\\\\\\`\\"\\\$]]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +_LT_OUTPUT_LIBTOOL_INIT +]) + +# _LT_GENERATED_FILE_INIT(FILE, [COMMENT]) +# ------------------------------------ +# Generate a child script FILE with all initialization necessary to +# reuse the environment learned by the parent script, and make the +# file executable. If COMMENT is supplied, it is inserted after the +# '#!' sequence but before initialization text begins. After this +# macro, additional text can be appended to FILE to form the body of +# the child script. The macro ends with non-zero status if the +# file could not be fully written (such as if the disk is full). +m4_ifdef([AS_INIT_GENERATED], +[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])], +[m4_defun([_LT_GENERATED_FILE_INIT], +[m4_require([AS_PREPARE])]dnl +[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl +[lt_write_fail=0 +cat >$1 <<_ASEOF || lt_write_fail=1 +#! $SHELL +# Generated by $as_me. +$2 +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$1 <<\_ASEOF || lt_write_fail=1 +AS_SHELL_SANITIZE +_AS_PREPARE +exec AS_MESSAGE_FD>&1 +_ASEOF +test 0 = "$lt_write_fail" && chmod +x $1[]dnl +m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT + +# LT_OUTPUT +# --------- +# This macro allows early generation of the libtool script (before +# AC_OUTPUT is called), incase it is used in configure for compilation +# tests. +AC_DEFUN([LT_OUTPUT], +[: ${CONFIG_LT=./config.lt} +AC_MSG_NOTICE([creating $CONFIG_LT]) +_LT_GENERATED_FILE_INIT(["$CONFIG_LT"], +[# Run this file to recreate a libtool stub with the current configuration.]) + +cat >>"$CONFIG_LT" <<\_LTEOF +lt_cl_silent=false +exec AS_MESSAGE_LOG_FD>>config.log +{ + echo + AS_BOX([Running $as_me.]) +} >&AS_MESSAGE_LOG_FD + +lt_cl_help="\ +'$as_me' creates a local libtool stub from the current configuration, +for use in further configure time tests before the real libtool is +generated. + +Usage: $[0] [[OPTIONS]] + + -h, --help print this help, then exit + -V, --version print version number, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + +Report bugs to ." + +lt_cl_version="\ +m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl +m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) +configured by $[0], generated by m4_PACKAGE_STRING. + +Copyright (C) 2011 Free Software Foundation, Inc. +This config.lt script is free software; the Free Software Foundation +gives unlimited permision to copy, distribute and modify it." + +while test 0 != $[#] +do + case $[1] in + --version | --v* | -V ) + echo "$lt_cl_version"; exit 0 ;; + --help | --h* | -h ) + echo "$lt_cl_help"; exit 0 ;; + --debug | --d* | -d ) + debug=: ;; + --quiet | --q* | --silent | --s* | -q ) + lt_cl_silent=: ;; + + -*) AC_MSG_ERROR([unrecognized option: $[1] +Try '$[0] --help' for more information.]) ;; + + *) AC_MSG_ERROR([unrecognized argument: $[1] +Try '$[0] --help' for more information.]) ;; + esac + shift +done + +if $lt_cl_silent; then + exec AS_MESSAGE_FD>/dev/null +fi +_LTEOF + +cat >>"$CONFIG_LT" <<_LTEOF +_LT_OUTPUT_LIBTOOL_COMMANDS_INIT +_LTEOF + +cat >>"$CONFIG_LT" <<\_LTEOF +AC_MSG_NOTICE([creating $ofile]) +_LT_OUTPUT_LIBTOOL_COMMANDS +AS_EXIT(0) +_LTEOF +chmod +x "$CONFIG_LT" + +# configure is writing to config.log, but config.lt does its own redirection, +# appending to config.log, which fails on DOS, as config.log is still kept +# open by configure. Here we exec the FD to /dev/null, effectively closing +# config.log, so it can be properly (re)opened and appended to by config.lt. +lt_cl_success=: +test yes = "$silent" && + lt_config_lt_args="$lt_config_lt_args --quiet" +exec AS_MESSAGE_LOG_FD>/dev/null +$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false +exec AS_MESSAGE_LOG_FD>>config.log +$lt_cl_success || AS_EXIT(1) +])# LT_OUTPUT + + +# _LT_CONFIG(TAG) +# --------------- +# If TAG is the built-in tag, create an initial libtool script with a +# default configuration from the untagged config vars. Otherwise add code +# to config.status for appending the configuration named by TAG from the +# matching tagged config vars. +m4_defun([_LT_CONFIG], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +_LT_CONFIG_SAVE_COMMANDS([ + m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl + m4_if(_LT_TAG, [C], [ + # See if we are running on zsh, and set the options that allow our + # commands through without removal of \ escapes. + if test -n "${ZSH_VERSION+set}"; then + setopt NO_GLOB_SUBST + fi + + cfgfile=${ofile}T + trap "$RM \"$cfgfile\"; exit 1" 1 2 15 + $RM "$cfgfile" + + cat <<_LT_EOF >> "$cfgfile" +#! $SHELL +# Generated automatically by $as_me ($PACKAGE) $VERSION +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# NOTE: Changes made to this file will be lost: look at ltmain.sh. + +# Provide generalized library-building support services. +# Written by Gordon Matzigkeit, 1996 + +_LT_COPYING +_LT_LIBTOOL_TAGS + +# Configured defaults for sys_lib_dlsearch_path munging. +: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"} + +# ### BEGIN LIBTOOL CONFIG +_LT_LIBTOOL_CONFIG_VARS +_LT_LIBTOOL_TAG_VARS +# ### END LIBTOOL CONFIG + +_LT_EOF + + cat <<'_LT_EOF' >> "$cfgfile" + +# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE + +_LT_PREPARE_MUNGE_PATH_LIST +_LT_PREPARE_CC_BASENAME + +# ### END FUNCTIONS SHARED WITH CONFIGURE + +_LT_EOF + + case $host_os in + aix3*) + cat <<\_LT_EOF >> "$cfgfile" +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test set != "${COLLECT_NAMES+set}"; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +_LT_EOF + ;; + esac + + _LT_PROG_LTMAIN + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" +], +[cat <<_LT_EOF >> "$ofile" + +dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded +dnl in a comment (ie after a #). +# ### BEGIN LIBTOOL TAG CONFIG: $1 +_LT_LIBTOOL_TAG_VARS(_LT_TAG) +# ### END LIBTOOL TAG CONFIG: $1 +_LT_EOF +])dnl /m4_if +], +[m4_if([$1], [], [ + PACKAGE='$PACKAGE' + VERSION='$VERSION' + RM='$RM' + ofile='$ofile'], []) +])dnl /_LT_CONFIG_SAVE_COMMANDS +])# _LT_CONFIG + + +# LT_SUPPORTED_TAG(TAG) +# --------------------- +# Trace this macro to discover what tags are supported by the libtool +# --tag option, using: +# autoconf --trace 'LT_SUPPORTED_TAG:$1' +AC_DEFUN([LT_SUPPORTED_TAG], []) + + +# C support is built-in for now +m4_define([_LT_LANG_C_enabled], []) +m4_define([_LT_TAGS], []) + + +# LT_LANG(LANG) +# ------------- +# Enable libtool support for the given language if not already enabled. +AC_DEFUN([LT_LANG], +[AC_BEFORE([$0], [LT_OUTPUT])dnl +m4_case([$1], + [C], [_LT_LANG(C)], + [C++], [_LT_LANG(CXX)], + [Go], [_LT_LANG(GO)], + [Java], [_LT_LANG(GCJ)], + [Fortran 77], [_LT_LANG(F77)], + [Fortran], [_LT_LANG(FC)], + [Windows Resource], [_LT_LANG(RC)], + [m4_ifdef([_LT_LANG_]$1[_CONFIG], + [_LT_LANG($1)], + [m4_fatal([$0: unsupported language: "$1"])])])dnl +])# LT_LANG + + +# _LT_LANG(LANGNAME) +# ------------------ +m4_defun([_LT_LANG], +[m4_ifdef([_LT_LANG_]$1[_enabled], [], + [LT_SUPPORTED_TAG([$1])dnl + m4_append([_LT_TAGS], [$1 ])dnl + m4_define([_LT_LANG_]$1[_enabled], [])dnl + _LT_LANG_$1_CONFIG($1)])dnl +])# _LT_LANG + + +m4_ifndef([AC_PROG_GO], [ +# NOTE: This macro has been submitted for inclusion into # +# GNU Autoconf as AC_PROG_GO. When it is available in # +# a released version of Autoconf we should remove this # +# macro and use it instead. # +m4_defun([AC_PROG_GO], +[AC_LANG_PUSH(Go)dnl +AC_ARG_VAR([GOC], [Go compiler command])dnl +AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl +_AC_ARG_VAR_LDFLAGS()dnl +AC_CHECK_TOOL(GOC, gccgo) +if test -z "$GOC"; then + if test -n "$ac_tool_prefix"; then + AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo]) + fi +fi +if test -z "$GOC"; then + AC_CHECK_PROG(GOC, gccgo, gccgo, false) +fi +])#m4_defun +])#m4_ifndef + + +# _LT_LANG_DEFAULT_CONFIG +# ----------------------- +m4_defun([_LT_LANG_DEFAULT_CONFIG], +[AC_PROVIDE_IFELSE([AC_PROG_CXX], + [LT_LANG(CXX)], + [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) + +AC_PROVIDE_IFELSE([AC_PROG_F77], + [LT_LANG(F77)], + [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) + +AC_PROVIDE_IFELSE([AC_PROG_FC], + [LT_LANG(FC)], + [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) + +dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal +dnl pulling things in needlessly. +AC_PROVIDE_IFELSE([AC_PROG_GCJ], + [LT_LANG(GCJ)], + [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], + [LT_LANG(GCJ)], + [AC_PROVIDE_IFELSE([LT_PROG_GCJ], + [LT_LANG(GCJ)], + [m4_ifdef([AC_PROG_GCJ], + [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) + m4_ifdef([A][M_PROG_GCJ], + [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) + m4_ifdef([LT_PROG_GCJ], + [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) + +AC_PROVIDE_IFELSE([AC_PROG_GO], + [LT_LANG(GO)], + [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])]) + +AC_PROVIDE_IFELSE([LT_PROG_RC], + [LT_LANG(RC)], + [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) +])# _LT_LANG_DEFAULT_CONFIG + +# Obsolete macros: +AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) +AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) +AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) +AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) +AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_CXX], []) +dnl AC_DEFUN([AC_LIBTOOL_F77], []) +dnl AC_DEFUN([AC_LIBTOOL_FC], []) +dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) +dnl AC_DEFUN([AC_LIBTOOL_RC], []) + + +# _LT_TAG_COMPILER +# ---------------- +m4_defun([_LT_TAG_COMPILER], +[AC_REQUIRE([AC_PROG_CC])dnl + +_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl +_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl +_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl +_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC +])# _LT_TAG_COMPILER + + +# _LT_COMPILER_BOILERPLATE +# ------------------------ +# Check for compiler boilerplate output or warnings with +# the simple compiler test code. +m4_defun([_LT_COMPILER_BOILERPLATE], +[m4_require([_LT_DECL_SED])dnl +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* +])# _LT_COMPILER_BOILERPLATE + + +# _LT_LINKER_BOILERPLATE +# ---------------------- +# Check for linker boilerplate output or warnings with +# the simple link test code. +m4_defun([_LT_LINKER_BOILERPLATE], +[m4_require([_LT_DECL_SED])dnl +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* +])# _LT_LINKER_BOILERPLATE + +# _LT_REQUIRED_DARWIN_CHECKS +# ------------------------- +m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ + case $host_os in + rhapsody* | darwin*) + AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) + AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) + AC_CHECK_TOOL([LIPO], [lipo], [:]) + AC_CHECK_TOOL([OTOOL], [otool], [:]) + AC_CHECK_TOOL([OTOOL64], [otool64], [:]) + _LT_DECL([], [DSYMUTIL], [1], + [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) + _LT_DECL([], [NMEDIT], [1], + [Tool to change global to local symbols on Mac OS X]) + _LT_DECL([], [LIPO], [1], + [Tool to manipulate fat objects and archives on Mac OS X]) + _LT_DECL([], [OTOOL], [1], + [ldd/readelf like tool for Mach-O binaries on Mac OS X]) + _LT_DECL([], [OTOOL64], [1], + [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) + + AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], + [lt_cv_apple_cc_single_mod=no + if test -z "$LT_MULTI_MODULE"; then + # By default we will add the -single_module flag. You can override + # by either setting the environment variable LT_MULTI_MODULE + # non-empty at configure time, or by adding -multi_module to the + # link flags. + rm -rf libconftest.dylib* + echo "int foo(void){return 1;}" > conftest.c + echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ + -dynamiclib -Wl,-single_module conftest.c 2>conftest.err + _lt_result=$? + # If there is a non-empty error log, and "single_module" + # appears in it, assume the flag caused a linker warning + if test -s conftest.err && $GREP single_module conftest.err; then + cat conftest.err >&AS_MESSAGE_LOG_FD + # Otherwise, if the output was created with a 0 exit code from + # the compiler, it worked. + elif test -f libconftest.dylib && test 0 = "$_lt_result"; then + lt_cv_apple_cc_single_mod=yes + else + cat conftest.err >&AS_MESSAGE_LOG_FD + fi + rm -rf libconftest.dylib* + rm -f conftest.* + fi]) + + AC_CACHE_CHECK([for -exported_symbols_list linker flag], + [lt_cv_ld_exported_symbols_list], + [lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" + AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], + [lt_cv_ld_exported_symbols_list=yes], + [lt_cv_ld_exported_symbols_list=no]) + LDFLAGS=$save_LDFLAGS + ]) + + AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load], + [lt_cv_ld_force_load=no + cat > conftest.c << _LT_EOF +int forced_loaded() { return 2;} +_LT_EOF + echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD + echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD + $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD + echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD + $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD + cat > conftest.c << _LT_EOF +int main() { return 0;} +_LT_EOF + echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err + _lt_result=$? + if test -s conftest.err && $GREP force_load conftest.err; then + cat conftest.err >&AS_MESSAGE_LOG_FD + elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then + lt_cv_ld_force_load=yes + else + cat conftest.err >&AS_MESSAGE_LOG_FD + fi + rm -f conftest.err libconftest.a conftest conftest.c + rm -rf conftest.dSYM + ]) + case $host_os in + rhapsody* | darwin1.[[012]]) + _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;; + darwin1.*) + _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; + darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) + _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; + 10.[[012]][[,.]]*) + _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; + 10.*) + _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; + esac + ;; + esac + if test yes = "$lt_cv_apple_cc_single_mod"; then + _lt_dar_single_mod='$single_module' + fi + if test yes = "$lt_cv_ld_exported_symbols_list"; then + _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym' + else + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib' + fi + if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then + _lt_dsymutil='~$DSYMUTIL $lib || :' + else + _lt_dsymutil= + fi + ;; + esac +]) + + +# _LT_DARWIN_LINKER_FEATURES([TAG]) +# --------------------------------- +# Checks for linker and compiler features on darwin +m4_defun([_LT_DARWIN_LINKER_FEATURES], +[ + m4_require([_LT_REQUIRED_DARWIN_CHECKS]) + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_automatic, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + if test yes = "$lt_cv_ld_force_load"; then + _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes], + [FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes]) + else + _LT_TAGVAR(whole_archive_flag_spec, $1)='' + fi + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)=$_lt_dar_allow_undefined + case $cc_basename in + ifort*|nagfor*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; + esac + if test yes = "$_lt_dar_can_shared"; then + output_verbose_link_cmd=func_echo_all + _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil" + _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil" + _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil" + _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil" + m4_if([$1], [CXX], +[ if test yes != "$lt_cv_apple_cc_single_mod"; then + _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil" + _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil" + fi +],[]) + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi +]) + +# _LT_SYS_MODULE_PATH_AIX([TAGNAME]) +# ---------------------------------- +# Links a minimal program and checks the executable +# for the system default hardcoded library path. In most cases, +# this is /usr/lib:/lib, but when the MPI compilers are used +# the location of the communication and MPI libs are included too. +# If we don't find anything, use the default library path according +# to the aix ld manual. +# Store the results from the different compilers for each TAGNAME. +# Allow to override them for all tags through lt_cv_aix_libpath. +m4_defun([_LT_SYS_MODULE_PATH_AIX], +[m4_require([_LT_DECL_SED])dnl +if test set = "${lt_cv_aix_libpath+set}"; then + aix_libpath=$lt_cv_aix_libpath +else + AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])], + [AC_LINK_IFELSE([AC_LANG_PROGRAM],[ + lt_aix_libpath_sed='[ + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }]' + _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then + _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi],[]) + if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then + _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=/usr/lib:/lib + fi + ]) + aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1]) +fi +])# _LT_SYS_MODULE_PATH_AIX + + +# _LT_SHELL_INIT(ARG) +# ------------------- +m4_define([_LT_SHELL_INIT], +[m4_divert_text([M4SH-INIT], [$1 +])])# _LT_SHELL_INIT + + + +# _LT_PROG_ECHO_BACKSLASH +# ----------------------- +# Find how we can fake an echo command that does not interpret backslash. +# In particular, with Autoconf 2.60 or later we add some code to the start +# of the generated configure script that will find a shell with a builtin +# printf (that we can use as an echo command). +m4_defun([_LT_PROG_ECHO_BACKSLASH], +[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + +AC_MSG_CHECKING([how to print strings]) +# Test print first, because it will be a builtin if present. +if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' +elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='printf %s\n' +else + # Use this function as a fallback that always works. + func_fallback_echo () + { + eval 'cat <<_LTECHO_EOF +$[]1 +_LTECHO_EOF' + } + ECHO='func_fallback_echo' +fi + +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "$*" +} + +case $ECHO in + printf*) AC_MSG_RESULT([printf]) ;; + print*) AC_MSG_RESULT([print -r]) ;; + *) AC_MSG_RESULT([cat]) ;; +esac + +m4_ifdef([_AS_DETECT_SUGGESTED], +[_AS_DETECT_SUGGESTED([ + test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || ( + ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' + ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO + ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + PATH=/empty FPATH=/empty; export PATH FPATH + test "X`printf %s $ECHO`" = "X$ECHO" \ + || test "X`print -r -- $ECHO`" = "X$ECHO" )])]) + +_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) +_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes]) +])# _LT_PROG_ECHO_BACKSLASH + + +# _LT_WITH_SYSROOT +# ---------------- +AC_DEFUN([_LT_WITH_SYSROOT], +[AC_MSG_CHECKING([for sysroot]) +AC_ARG_WITH([sysroot], +[AS_HELP_STRING([--with-sysroot@<:@=DIR@:>@], + [Search for dependent libraries within DIR (or the compiler's sysroot + if not specified).])], +[], [with_sysroot=no]) + +dnl lt_sysroot will always be passed unquoted. We quote it here +dnl in case the user passed a directory name. +lt_sysroot= +case $with_sysroot in #( + yes) + if test yes = "$GCC"; then + lt_sysroot=`$CC --print-sysroot 2>/dev/null` + fi + ;; #( + /*) + lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` + ;; #( + no|'') + ;; #( + *) + AC_MSG_RESULT([$with_sysroot]) + AC_MSG_ERROR([The sysroot must be an absolute path.]) + ;; +esac + + AC_MSG_RESULT([${lt_sysroot:-no}]) +_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl +[dependent libraries, and where our libraries should be installed.])]) + +# _LT_ENABLE_LOCK +# --------------- +m4_defun([_LT_ENABLE_LOCK], +[AC_ARG_ENABLE([libtool-lock], + [AS_HELP_STRING([--disable-libtool-lock], + [avoid locking (might break parallel builds)])]) +test no = "$enable_libtool_lock" || enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out what ABI is being produced by ac_compile, and set mode + # options accordingly. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE=32 + ;; + *ELF-64*) + HPUX_IA64_MODE=64 + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. + echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + if test yes = "$lt_cv_prog_gnu_ld"; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +mips64*-*linux*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. + echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + emul=elf + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + emul="${emul}32" + ;; + *64-bit*) + emul="${emul}64" + ;; + esac + case `/usr/bin/file conftest.$ac_objext` in + *MSB*) + emul="${emul}btsmip" + ;; + *LSB*) + emul="${emul}ltsmip" + ;; + esac + case `/usr/bin/file conftest.$ac_objext` in + *N32*) + emul="${emul}n32" + ;; + esac + LD="${LD-ld} -m $emul" + fi + rm -rf conftest* + ;; + +x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \ +s390*-*linux*|s390*-*tpf*|sparc*-*linux*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. Note that the listed cases only cover the + # situations where additional linker options are needed (such as when + # doing 32-bit compilation for a host where ld defaults to 64-bit, or + # vice versa); the common cases where no linker options are needed do + # not appear in the list. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_i386_fbsd" + ;; + x86_64-*linux*) + case `/usr/bin/file conftest.o` in + *x86-64*) + LD="${LD-ld} -m elf32_x86_64" + ;; + *) + LD="${LD-ld} -m elf_i386" + ;; + esac + ;; + powerpc64le-*linux*) + LD="${LD-ld} -m elf32lppclinux" + ;; + powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_x86_64_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + powerpcle-*linux*) + LD="${LD-ld} -m elf64lppc" + ;; + powerpc-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*|s390*-*tpf*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS=$CFLAGS + CFLAGS="$CFLAGS -belf" + AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, + [AC_LANG_PUSH(C) + AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) + AC_LANG_POP]) + if test yes != "$lt_cv_cc_needs_belf"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS=$SAVE_CFLAGS + fi + ;; +*-*solaris*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) + case $host in + i?86-*-solaris*|x86_64-*-solaris*) + LD="${LD-ld} -m elf_x86_64" + ;; + sparc*-*-solaris*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + # GNU ld 2.21 introduced _sol2 emulations. Use them if available. + if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then + LD=${LD-ld}_sol2 + fi + ;; + *) + if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then + LD="${LD-ld} -64" + fi + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; +esac + +need_locks=$enable_libtool_lock +])# _LT_ENABLE_LOCK + + +# _LT_PROG_AR +# ----------- +m4_defun([_LT_PROG_AR], +[AC_CHECK_TOOLS(AR, [ar], false) +: ${AR=ar} +: ${AR_FLAGS=cru} +_LT_DECL([], [AR], [1], [The archiver]) +_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive]) + +AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file], + [lt_cv_ar_at_file=no + AC_COMPILE_IFELSE([AC_LANG_PROGRAM], + [echo conftest.$ac_objext > conftest.lst + lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD' + AC_TRY_EVAL([lt_ar_try]) + if test 0 -eq "$ac_status"; then + # Ensure the archiver fails upon bogus file names. + rm -f conftest.$ac_objext libconftest.a + AC_TRY_EVAL([lt_ar_try]) + if test 0 -ne "$ac_status"; then + lt_cv_ar_at_file=@ + fi + fi + rm -f conftest.* libconftest.a + ]) + ]) + +if test no = "$lt_cv_ar_at_file"; then + archiver_list_spec= +else + archiver_list_spec=$lt_cv_ar_at_file +fi +_LT_DECL([], [archiver_list_spec], [1], + [How to feed a file listing to the archiver]) +])# _LT_PROG_AR + + +# _LT_CMD_OLD_ARCHIVE +# ------------------- +m4_defun([_LT_CMD_OLD_ARCHIVE], +[_LT_PROG_AR + +AC_CHECK_TOOL(STRIP, strip, :) +test -z "$STRIP" && STRIP=: +_LT_DECL([], [STRIP], [1], [A symbol stripping program]) + +AC_CHECK_TOOL(RANLIB, ranlib, :) +test -z "$RANLIB" && RANLIB=: +_LT_DECL([], [RANLIB], [1], + [Commands used to install an old-style archive]) + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + bitrig* | openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" +fi + +case $host_os in + darwin*) + lock_old_archive_extraction=yes ;; + *) + lock_old_archive_extraction=no ;; +esac +_LT_DECL([], [old_postinstall_cmds], [2]) +_LT_DECL([], [old_postuninstall_cmds], [2]) +_LT_TAGDECL([], [old_archive_cmds], [2], + [Commands used to build an old-style archive]) +_LT_DECL([], [lock_old_archive_extraction], [0], + [Whether to use a lock for old archive extraction]) +])# _LT_CMD_OLD_ARCHIVE + + +# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------------------- +# Check whether the given compiler option works +AC_DEFUN([_LT_COMPILER_OPTION], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_SED])dnl +AC_CACHE_CHECK([$1], [$2], + [$2=no + m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$3" ## exclude from sc_useless_quotes_in_assignment + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi + fi + $RM conftest* +]) + +if test yes = "[$]$2"; then + m4_if([$5], , :, [$5]) +else + m4_if([$6], , :, [$6]) +fi +])# _LT_COMPILER_OPTION + +# Old name: +AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) + + +# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------- +# Check whether the given linker option works +AC_DEFUN([_LT_LINKER_OPTION], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_SED])dnl +AC_CACHE_CHECK([$1], [$2], + [$2=no + save_LDFLAGS=$LDFLAGS + LDFLAGS="$LDFLAGS $3" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&AS_MESSAGE_LOG_FD + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi + else + $2=yes + fi + fi + $RM -r conftest* + LDFLAGS=$save_LDFLAGS +]) + +if test yes = "[$]$2"; then + m4_if([$4], , :, [$4]) +else + m4_if([$5], , :, [$5]) +fi +])# _LT_LINKER_OPTION + +# Old name: +AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) + + +# LT_CMD_MAX_LEN +#--------------- +AC_DEFUN([LT_CMD_MAX_LEN], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +# find the maximum length of command line arguments +AC_MSG_CHECKING([the maximum length of command line arguments]) +AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl + i=0 + teststring=ABCD + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw* | cegcc*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + mint*) + # On MiNT this can take a long time and run out of memory. + lt_cv_sys_max_cmd_len=8192; + ;; + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; + + os2*) + # The test takes a long time on OS/2. + lt_cv_sys_max_cmd_len=8192 + ;; + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) + lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` + if test -n "$lt_cv_sys_max_cmd_len" && \ + test undefined != "$lt_cv_sys_max_cmd_len"; then + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + else + # Make teststring a little bigger before we do anything with it. + # a 1K string should be a reasonable start. + for i in 1 2 3 4 5 6 7 8; do + teststring=$teststring$teststring + done + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while { test X`env echo "$teststring$teststring" 2>/dev/null` \ + = "X$teststring$teststring"; } >/dev/null 2>&1 && + test 17 != "$i" # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + # Only check the string length outside the loop. + lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` + teststring= + # Add a significant safety factor because C++ compilers can tack on + # massive amounts of additional arguments before passing them to the + # linker. It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + fi + ;; + esac +]) +if test -n "$lt_cv_sys_max_cmd_len"; then + AC_MSG_RESULT($lt_cv_sys_max_cmd_len) +else + AC_MSG_RESULT(none) +fi +max_cmd_len=$lt_cv_sys_max_cmd_len +_LT_DECL([], [max_cmd_len], [0], + [What is the maximum length of a command?]) +])# LT_CMD_MAX_LEN + +# Old name: +AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) + + +# _LT_HEADER_DLFCN +# ---------------- +m4_defun([_LT_HEADER_DLFCN], +[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl +])# _LT_HEADER_DLFCN + + +# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, +# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) +# ---------------------------------------------------------------- +m4_defun([_LT_TRY_DLOPEN_SELF], +[m4_require([_LT_HEADER_DLFCN])dnl +if test yes = "$cross_compiling"; then : + [$4] +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +[#line $LINENO "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisibility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); +#endif + +int fnord () { return 42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +}] +_LT_EOF + if AC_TRY_EVAL(ac_link) && test -s "conftest$ac_exeext" 2>/dev/null; then + (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) $1 ;; + x$lt_dlneed_uscore) $2 ;; + x$lt_dlunknown|x*) $3 ;; + esac + else : + # compilation failed + $3 + fi +fi +rm -fr conftest* +])# _LT_TRY_DLOPEN_SELF + + +# LT_SYS_DLOPEN_SELF +# ------------------ +AC_DEFUN([LT_SYS_DLOPEN_SELF], +[m4_require([_LT_HEADER_DLFCN])dnl +if test yes != "$enable_dlopen"; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen=load_add_on + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32* | cegcc*) + lt_cv_dlopen=LoadLibrary + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen=dlopen + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],[ + lt_cv_dlopen=dyld + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ]) + ;; + + tpf*) + # Don't try to run any link tests for TPF. We know it's impossible + # because TPF is a cross-compiler, and we know how we open DSOs. + lt_cv_dlopen=dlopen + lt_cv_dlopen_libs= + lt_cv_dlopen_self=no + ;; + + *) + AC_CHECK_FUNC([shl_load], + [lt_cv_dlopen=shl_load], + [AC_CHECK_LIB([dld], [shl_load], + [lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld], + [AC_CHECK_FUNC([dlopen], + [lt_cv_dlopen=dlopen], + [AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl], + [AC_CHECK_LIB([svld], [dlopen], + [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld], + [AC_CHECK_LIB([dld], [dld_link], + [lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld]) + ]) + ]) + ]) + ]) + ]) + ;; + esac + + if test no = "$lt_cv_dlopen"; then + enable_dlopen=no + else + enable_dlopen=yes + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS=$CPPFLAGS + test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS=$LDFLAGS + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS=$LIBS + LIBS="$lt_cv_dlopen_libs $LIBS" + + AC_CACHE_CHECK([whether a program can dlopen itself], + lt_cv_dlopen_self, [dnl + _LT_TRY_DLOPEN_SELF( + lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, + lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) + ]) + + if test yes = "$lt_cv_dlopen_self"; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + AC_CACHE_CHECK([whether a statically linked program can dlopen itself], + lt_cv_dlopen_self_static, [dnl + _LT_TRY_DLOPEN_SELF( + lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, + lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) + ]) + fi + + CPPFLAGS=$save_CPPFLAGS + LDFLAGS=$save_LDFLAGS + LIBS=$save_LIBS + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi +_LT_DECL([dlopen_support], [enable_dlopen], [0], + [Whether dlopen is supported]) +_LT_DECL([dlopen_self], [enable_dlopen_self], [0], + [Whether dlopen of programs is supported]) +_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], + [Whether dlopen of statically linked programs is supported]) +])# LT_SYS_DLOPEN_SELF + +# Old name: +AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) + + +# _LT_COMPILER_C_O([TAGNAME]) +# --------------------------- +# Check to see if options -c and -o are simultaneously supported by compiler. +# This macro does not hard code the compiler like AC_PROG_CC_C_O. +m4_defun([_LT_COMPILER_C_O], +[m4_require([_LT_DECL_SED])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_TAG_COMPILER])dnl +AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], + [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], + [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + fi + fi + chmod u+w . 2>&AS_MESSAGE_LOG_FD + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* +]) +_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], + [Does compiler simultaneously support -c and -o options?]) +])# _LT_COMPILER_C_O + + +# _LT_COMPILER_FILE_LOCKS([TAGNAME]) +# ---------------------------------- +# Check to see if we can do hard links to lock some files if needed +m4_defun([_LT_COMPILER_FILE_LOCKS], +[m4_require([_LT_ENABLE_LOCK])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +_LT_COMPILER_C_O([$1]) + +hard_links=nottested +if test no = "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" && test no != "$need_locks"; then + # do not overwrite the value of need_locks provided by the user + AC_MSG_CHECKING([if we can lock with hard links]) + hard_links=yes + $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + AC_MSG_RESULT([$hard_links]) + if test no = "$hard_links"; then + AC_MSG_WARN(['$CC' does not support '-c -o', so 'make -j' may be unsafe]) + need_locks=warn + fi +else + need_locks=no +fi +_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) +])# _LT_COMPILER_FILE_LOCKS + + +# _LT_CHECK_OBJDIR +# ---------------- +m4_defun([_LT_CHECK_OBJDIR], +[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], +[rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null]) +objdir=$lt_cv_objdir +_LT_DECL([], [objdir], [0], + [The name of the directory that contains temporary libtool files])dnl +m4_pattern_allow([LT_OBJDIR])dnl +AC_DEFINE_UNQUOTED([LT_OBJDIR], "$lt_cv_objdir/", + [Define to the sub-directory where libtool stores uninstalled libraries.]) +])# _LT_CHECK_OBJDIR + + +# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) +# -------------------------------------- +# Check hardcoding attributes. +m4_defun([_LT_LINKER_HARDCODE_LIBPATH], +[AC_MSG_CHECKING([how to hardcode library paths into programs]) +_LT_TAGVAR(hardcode_action, $1)= +if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || + test -n "$_LT_TAGVAR(runpath_var, $1)" || + test yes = "$_LT_TAGVAR(hardcode_automatic, $1)"; then + + # We can hardcode non-existent directories. + if test no != "$_LT_TAGVAR(hardcode_direct, $1)" && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" && + test no != "$_LT_TAGVAR(hardcode_minus_L, $1)"; then + # Linking always hardcodes the temporary library directory. + _LT_TAGVAR(hardcode_action, $1)=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + _LT_TAGVAR(hardcode_action, $1)=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + _LT_TAGVAR(hardcode_action, $1)=unsupported +fi +AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) + +if test relink = "$_LT_TAGVAR(hardcode_action, $1)" || + test yes = "$_LT_TAGVAR(inherit_rpath, $1)"; then + # Fast installation is not supported + enable_fast_install=no +elif test yes = "$shlibpath_overrides_runpath" || + test no = "$enable_shared"; then + # Fast installation is not necessary + enable_fast_install=needless +fi +_LT_TAGDECL([], [hardcode_action], [0], + [How to hardcode a shared library path into an executable]) +])# _LT_LINKER_HARDCODE_LIBPATH + + +# _LT_CMD_STRIPLIB +# ---------------- +m4_defun([_LT_CMD_STRIPLIB], +[m4_require([_LT_DECL_EGREP]) +striplib= +old_striplib= +AC_MSG_CHECKING([whether stripping libraries is possible]) +if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + AC_MSG_RESULT([yes]) +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP"; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + fi + ;; + *) + AC_MSG_RESULT([no]) + ;; + esac +fi +_LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) +_LT_DECL([], [striplib], [1]) +])# _LT_CMD_STRIPLIB + + +# _LT_PREPARE_MUNGE_PATH_LIST +# --------------------------- +# Make sure func_munge_path_list() is defined correctly. +m4_defun([_LT_PREPARE_MUNGE_PATH_LIST], +[[# func_munge_path_list VARIABLE PATH +# ----------------------------------- +# VARIABLE is name of variable containing _space_ separated list of +# directories to be munged by the contents of PATH, which is string +# having a format: +# "DIR[:DIR]:" +# string "DIR[ DIR]" will be prepended to VARIABLE +# ":DIR[:DIR]" +# string "DIR[ DIR]" will be appended to VARIABLE +# "DIRP[:DIRP]::[DIRA:]DIRA" +# string "DIRP[ DIRP]" will be prepended to VARIABLE and string +# "DIRA[ DIRA]" will be appended to VARIABLE +# "DIR[:DIR]" +# VARIABLE will be replaced by "DIR[ DIR]" +func_munge_path_list () +{ + case x@S|@2 in + x) + ;; + *:) + eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'` \@S|@@S|@1\" + ;; + x:*) + eval @S|@1=\"\@S|@@S|@1 `$ECHO @S|@2 | $SED 's/:/ /g'`\" + ;; + *::*) + eval @S|@1=\"\@S|@@S|@1\ `$ECHO @S|@2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" + eval @S|@1=\"`$ECHO @S|@2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \@S|@@S|@1\" + ;; + *) + eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'`\" + ;; + esac +} +]])# _LT_PREPARE_PATH_LIST + + +# _LT_SYS_DYNAMIC_LINKER([TAG]) +# ----------------------------- +# PORTME Fill in your ld.so characteristics +m4_defun([_LT_SYS_DYNAMIC_LINKER], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_OBJDUMP])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_CHECK_SHELL_FEATURES])dnl +m4_require([_LT_PREPARE_MUNGE_PATH_LIST])dnl +AC_MSG_CHECKING([dynamic linker characteristics]) +m4_if([$1], + [], [ +if test yes = "$GCC"; then + case $host_os in + darwin*) lt_awk_arg='/^libraries:/,/LR/' ;; + *) lt_awk_arg='/^libraries:/' ;; + esac + case $host_os in + mingw* | cegcc*) lt_sed_strip_eq='s|=\([[A-Za-z]]:\)|\1|g' ;; + *) lt_sed_strip_eq='s|=/|/|g' ;; + esac + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` + case $lt_search_path_spec in + *\;*) + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` + ;; + *) + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` + ;; + esac + # Ok, now we have the path, separated by spaces, we can step through it + # and add multilib dir if necessary... + lt_tmp_lt_search_path_spec= + lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + # ...but if some path component already ends with the multilib dir we assume + # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer). + case "$lt_multi_os_dir; $lt_search_path_spec " in + "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*) + lt_multi_os_dir= + ;; + esac + for lt_sys_path in $lt_search_path_spec; do + if test -d "$lt_sys_path$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir" + elif test -n "$lt_multi_os_dir"; then + test -d "$lt_sys_path" && \ + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" + fi + done + lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' +BEGIN {RS = " "; FS = "/|\n";} { + lt_foo = ""; + lt_count = 0; + for (lt_i = NF; lt_i > 0; lt_i--) { + if ($lt_i != "" && $lt_i != ".") { + if ($lt_i == "..") { + lt_count++; + } else { + if (lt_count == 0) { + lt_foo = "/" $lt_i lt_foo; + } else { + lt_count--; + } + } + } + } + if (lt_foo != "") { lt_freq[[lt_foo]]++; } + if (lt_freq[[lt_foo]] == 1) { print lt_foo; } +}'` + # AWK program above erroneously prepends '/' to C:/dos/paths + # for these hosts. + case $host_os in + mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ + $SED 's|/\([[A-Za-z]]:\)|\1|g'` ;; + esac + sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi]) +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=.so +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +AC_ARG_VAR([LT_SYS_LIBRARY_PATH], +[User-defined run-time library search path.]) + +case $host_os in +aix3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$release$shared_ext$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='$libname$release$shared_ext$major' + ;; + +aix[[4-9]]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test ia64 = "$host_cpu"; then + # AIX 5 supports IA64 + library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line '#! .'. This would cause the generated library to + # depend on '.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[[01]] | aix4.[[01]].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # Using Import Files as archive members, it is possible to support + # filename-based versioning of shared library archives on AIX. While + # this would work for both with and without runtime linking, it will + # prevent static linking of such archives. So we do filename-based + # shared library versioning with .so extension only, which is used + # when both runtime linking and shared linking is enabled. + # Unfortunately, runtime linking may impact performance, so we do + # not want this to be the default eventually. Also, we use the + # versioned .so libs for executables only if there is the -brtl + # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only. + # To allow for filename-based versioning support, we need to create + # libNAME.so.V as an archive file, containing: + # *) an Import File, referring to the versioned filename of the + # archive as well as the shared archive member, telling the + # bitwidth (32 or 64) of that shared object, and providing the + # list of exported symbols of that shared object, eventually + # decorated with the 'weak' keyword + # *) the shared object with the F_LOADONLY flag set, to really avoid + # it being seen by the linker. + # At run time we better use the real file rather than another symlink, + # but for link time we create the symlink libNAME.so -> libNAME.so.V + + case $with_aix_soname,$aix_use_runtimelinking in + # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + aix,yes) # traditional libtool + dynamic_linker='AIX unversionable lib.so' + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + ;; + aix,no) # traditional AIX only + dynamic_linker='AIX lib.a[(]lib.so.V[)]' + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='$libname$release.a $libname.a' + soname_spec='$libname$release$shared_ext$major' + ;; + svr4,*) # full svr4 only + dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)]" + library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' + # We do not specify a path in Import Files, so LIBPATH fires. + shlibpath_overrides_runpath=yes + ;; + *,yes) # both, prefer svr4 + dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)], lib.a[(]lib.so.V[)]" + library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' + # unpreferred sharedlib libNAME.a needs extra handling + postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"' + postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"' + # We do not specify a path in Import Files, so LIBPATH fires. + shlibpath_overrides_runpath=yes + ;; + *,no) # both, prefer aix + dynamic_linker="AIX lib.a[(]lib.so.V[)], lib.so.V[(]$shared_archive_member_spec.o[)]" + library_names_spec='$libname$release.a $libname.a' + soname_spec='$libname$release$shared_ext$major' + # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling + postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)' + postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"' + ;; + esac + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac + ;; + +beos*) + library_names_spec='$libname$shared_ext' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[[45]]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32* | cegcc*) + version_type=windows + shrext_cmds=.dll + need_version=no + need_lib_prefix=no + + case $GCC,$cc_basename in + yes,*) + # gcc + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' +m4_if([$1], [],[ + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"]) + ;; + mingw* | cegcc*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' + ;; + esac + dynamic_linker='Win32 ld.exe' + ;; + + *,cl*) + # Native MSVC + libname_spec='$name' + soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' + library_names_spec='$libname.dll.lib' + + case $build_os in + mingw*) + sys_lib_search_path_spec= + lt_save_ifs=$IFS + IFS=';' + for lt_path in $LIB + do + IFS=$lt_save_ifs + # Let DOS variable expansion print the short 8.3 style file name. + lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` + sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" + done + IFS=$lt_save_ifs + # Convert to MSYS style. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'` + ;; + cygwin*) + # Convert to unix form, then to dos form, then back to unix form + # but this time dos style (no spaces!) so that the unix form looks + # like /cygdrive/c/PROGRA~1:/cygdr... + sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` + sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` + sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + ;; + *) + sys_lib_search_path_spec=$LIB + if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then + # It is most probably a Windows format PATH. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + # FIXME: find the short name or the path components, as spaces are + # common. (e.g. "Program Files" -> "PROGRA~1") + ;; + esac + + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + dynamic_linker='Win32 link.exe' + ;; + + *) + # Assume MSVC wrapper + library_names_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext $libname.lib' + dynamic_linker='Win32 ld.exe' + ;; + esac + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$major$shared_ext $libname$shared_ext' + soname_spec='$libname$release$major$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' +m4_if([$1], [],[ + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[[23]].*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2.*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[[01]]* | freebsdelf3.[[01]]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ + freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; + +haiku*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + dynamic_linker="$host_os runtime_loader" + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=no + sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + if test 32 = "$HPUX_IA64_MODE"; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + sys_lib_dlsearch_path_spec=/usr/lib/hpux32 + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + sys_lib_dlsearch_path_spec=/usr/lib/hpux64 + fi + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + postinstall_cmds='chmod 555 $lib' + # or fails outright, so override atomically: + install_override_mode=555 + ;; + +interix[[3-9]]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test yes = "$lt_cv_prog_gnu_ld"; then + version_type=linux # correct to gnu/linux during the next big refactor + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='$libname$release$shared_ext$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff" + sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +linux*android*) + version_type=none # Android doesn't support versioned libraries. + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext' + soname_spec='$libname$release$shared_ext' + finish_cmds= + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + dynamic_linker='Android linker' + # Don't embed -rpath directories since the linker doesn't support them. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + + # Some binutils ld are patched to set DT_RUNPATH + AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath], + [lt_cv_shlibpath_overrides_runpath=no + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ + LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" + AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], + [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], + [lt_cv_shlibpath_overrides_runpath=yes])]) + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + ]) + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Ideally, we could use ldconfig to report *all* directores which are + # searched for libraries, however this is still not possible. Aside from not + # being certain /sbin/ldconfig is available, command + # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64, + # even though it is searched at run-time. Try to do the best guess by + # appending ld.so.conf contents (and includes) to the search path. + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +*nto* | *qnx*) + version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' + ;; + +openbsd* | bitrig*) + version_type=sunos + sys_lib_dlsearch_path_spec=/usr/lib + need_lib_prefix=no + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then + need_version=no + else + need_version=yes + fi + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +os2*) + libname_spec='$name' + version_type=windows + shrext_cmds=.dll + need_version=no + need_lib_prefix=no + # OS/2 can only load a DLL with a base name of 8 characters or less. + soname_spec='`test -n "$os2dllname" && libname="$os2dllname"; + v=$($ECHO $release$versuffix | tr -d .-); + n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _); + $ECHO $n$v`$shared_ext' + library_names_spec='${libname}_dll.$libext' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=BEGINLIBPATH + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='$libname$release$shared_ext$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + +rdos*) + dynamic_linker=no + ;; + +solaris*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test yes = "$with_gnu_ld"; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec; then + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext' + soname_spec='$libname$shared_ext.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=sco + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test yes = "$with_gnu_ld"; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +uts4*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +AC_MSG_RESULT([$dynamic_linker]) +test no = "$dynamic_linker" && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test yes = "$GCC"; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then + sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec +fi + +if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then + sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec +fi + +# remember unaugmented sys_lib_dlsearch_path content for libtool script decls... +configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec + +# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code +func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH" + +# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool +configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH + +_LT_DECL([], [variables_saved_for_relink], [1], + [Variables whose values should be saved in libtool wrapper scripts and + restored at link time]) +_LT_DECL([], [need_lib_prefix], [0], + [Do we need the "lib" prefix for modules?]) +_LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) +_LT_DECL([], [version_type], [0], [Library versioning type]) +_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) +_LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) +_LT_DECL([], [shlibpath_overrides_runpath], [0], + [Is shlibpath searched before the hard-coded library search path?]) +_LT_DECL([], [libname_spec], [1], [Format of library name prefix]) +_LT_DECL([], [library_names_spec], [1], + [[List of archive names. First name is the real one, the rest are links. + The last name is the one that the linker finds with -lNAME]]) +_LT_DECL([], [soname_spec], [1], + [[The coded name of the library, if different from the real name]]) +_LT_DECL([], [install_override_mode], [1], + [Permission mode override for installation of shared libraries]) +_LT_DECL([], [postinstall_cmds], [2], + [Command to use after installation of a shared archive]) +_LT_DECL([], [postuninstall_cmds], [2], + [Command to use after uninstallation of a shared archive]) +_LT_DECL([], [finish_cmds], [2], + [Commands used to finish a libtool library installation in a directory]) +_LT_DECL([], [finish_eval], [1], + [[As "finish_cmds", except a single script fragment to be evaled but + not shown]]) +_LT_DECL([], [hardcode_into_libs], [0], + [Whether we should hardcode library paths into libraries]) +_LT_DECL([], [sys_lib_search_path_spec], [2], + [Compile-time system search path for libraries]) +_LT_DECL([sys_lib_dlsearch_path_spec], [configure_time_dlsearch_path], [2], + [Detected run-time system search path for libraries]) +_LT_DECL([], [configure_time_lt_sys_library_path], [2], + [Explicit LT_SYS_LIBRARY_PATH set during ./configure time]) +])# _LT_SYS_DYNAMIC_LINKER + + +# _LT_PATH_TOOL_PREFIX(TOOL) +# -------------------------- +# find a file program that can recognize shared library +AC_DEFUN([_LT_PATH_TOOL_PREFIX], +[m4_require([_LT_DECL_EGREP])dnl +AC_MSG_CHECKING([for $1]) +AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, +[case $MAGIC_CMD in +[[\\/*] | ?:[\\/]*]) + lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD=$MAGIC_CMD + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR +dnl $ac_dummy forces splitting on constant user-supplied paths. +dnl POSIX.2 word splitting is done only on the output of word expansions, +dnl not every word. This closes a longstanding sh security hole. + ac_dummy="m4_if([$2], , $PATH, [$2])" + for ac_dir in $ac_dummy; do + IFS=$lt_save_ifs + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$1"; then + lt_cv_path_MAGIC_CMD=$ac_dir/"$1" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD=$lt_cv_path_MAGIC_CMD + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS=$lt_save_ifs + MAGIC_CMD=$lt_save_MAGIC_CMD + ;; +esac]) +MAGIC_CMD=$lt_cv_path_MAGIC_CMD +if test -n "$MAGIC_CMD"; then + AC_MSG_RESULT($MAGIC_CMD) +else + AC_MSG_RESULT(no) +fi +_LT_DECL([], [MAGIC_CMD], [0], + [Used to examine libraries when file_magic_cmd begins with "file"])dnl +])# _LT_PATH_TOOL_PREFIX + +# Old name: +AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) + + +# _LT_PATH_MAGIC +# -------------- +# find a file program that can recognize a shared library +m4_defun([_LT_PATH_MAGIC], +[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) + else + MAGIC_CMD=: + fi +fi +])# _LT_PATH_MAGIC + + +# LT_PATH_LD +# ---------- +# find the pathname to the GNU or non-GNU linker +AC_DEFUN([LT_PATH_LD], +[AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_PROG_ECHO_BACKSLASH])dnl + +AC_ARG_WITH([gnu-ld], + [AS_HELP_STRING([--with-gnu-ld], + [assume the C compiler uses GNU ld @<:@default=no@:>@])], + [test no = "$withval" || with_gnu_ld=yes], + [with_gnu_ld=no])dnl + +ac_prog=ld +if test yes = "$GCC"; then + # Check if gcc -print-prog-name=ld gives a path. + AC_MSG_CHECKING([for ld used by $CC]) + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return, which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [[\\/]]* | ?:[[\\/]]*) + re_direlt='/[[^/]][[^/]]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD=$ac_prog + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test yes = "$with_gnu_ld"; then + AC_MSG_CHECKING([for GNU ld]) +else + AC_MSG_CHECKING([for non-GNU ld]) +fi +AC_CACHE_VAL(lt_cv_path_LD, +[if test -z "$LD"; then + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS=$lt_save_ifs + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD=$ac_dir/$ac_prog + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &1 conftest.i +cat conftest.i conftest.i >conftest2.i +: ${lt_DD:=$DD} +AC_PATH_PROGS_FEATURE_CHECK([lt_DD], [dd], +[if "$ac_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then + cmp -s conftest.i conftest.out \ + && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=: +fi]) +rm -f conftest.i conftest2.i conftest.out]) +])# _LT_PATH_DD + + +# _LT_CMD_TRUNCATE +# ---------------- +# find command to truncate a binary pipe +m4_defun([_LT_CMD_TRUNCATE], +[m4_require([_LT_PATH_DD]) +AC_CACHE_CHECK([how to truncate binary pipes], [lt_cv_truncate_bin], +[printf 0123456789abcdef0123456789abcdef >conftest.i +cat conftest.i conftest.i >conftest2.i +lt_cv_truncate_bin= +if "$ac_cv_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then + cmp -s conftest.i conftest.out \ + && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1" +fi +rm -f conftest.i conftest2.i conftest.out +test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"]) +_LT_DECL([lt_truncate_bin], [lt_cv_truncate_bin], [1], + [Command to truncate a binary pipe]) +])# _LT_CMD_TRUNCATE + + +# _LT_CHECK_MAGIC_METHOD +# ---------------------- +# how to check for library dependencies +# -- PORTME fill in with the dynamic library characteristics +m4_defun([_LT_CHECK_MAGIC_METHOD], +[m4_require([_LT_DECL_EGREP]) +m4_require([_LT_DECL_OBJDUMP]) +AC_CACHE_CHECK([how to recognize dependent libraries], +lt_cv_deplibs_check_method, +[lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# 'unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [[regex]]' -- check by looking for files in library path +# that responds to the $file_magic_cmd with a given extended regex. +# If you have 'file' or equivalent on your system and you're not sure +# whether 'pass_all' will *always* work, you probably want this one. + +case $host_os in +aix[[4-9]]*) + lt_cv_deplibs_check_method=pass_all + ;; + +beos*) + lt_cv_deplibs_check_method=pass_all + ;; + +bsdi[[45]]*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; + +cygwin*) + # func_win32_libid is a shell function defined in ltmain.sh + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + ;; + +mingw* | pw32*) + # Base MSYS/MinGW do not provide the 'file' command needed by + # func_win32_libid shell function, so use a weaker test based on 'objdump', + # unless we find 'file', for example because we are cross-compiling. + if ( file / ) >/dev/null 2>&1; then + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else + # Keep this pattern in sync with the one in func_win32_libid. + lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; + +cegcc*) + # use the weaker test based on 'objdump'. See mingw*. + lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; + +freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +haiku*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'] + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +interix[[3-9]]*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' + ;; + +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +*nto* | *qnx*) + lt_cv_deplibs_check_method=pass_all + ;; + +openbsd* | bitrig*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + fi + ;; + +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; + +rdos*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +tpf*) + lt_cv_deplibs_check_method=pass_all + ;; +os2*) + lt_cv_deplibs_check_method=pass_all + ;; +esac +]) + +file_magic_glob= +want_nocaseglob=no +if test "$build" = "$host"; then + case $host_os in + mingw* | pw32*) + if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then + want_nocaseglob=yes + else + file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"` + fi + ;; + esac +fi + +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown + +_LT_DECL([], [deplibs_check_method], [1], + [Method to check whether dependent libraries are shared objects]) +_LT_DECL([], [file_magic_cmd], [1], + [Command to use when deplibs_check_method = "file_magic"]) +_LT_DECL([], [file_magic_glob], [1], + [How to find potential files when deplibs_check_method = "file_magic"]) +_LT_DECL([], [want_nocaseglob], [1], + [Find potential files using nocaseglob when deplibs_check_method = "file_magic"]) +])# _LT_CHECK_MAGIC_METHOD + + +# LT_PATH_NM +# ---------- +# find the pathname to a BSD- or MS-compatible name lister +AC_DEFUN([LT_PATH_NM], +[AC_REQUIRE([AC_PROG_CC])dnl +AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, +[if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM=$NM +else + lt_nm_to_check=${ac_tool_prefix}nm + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" + fi + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS=$lt_save_ifs + test -z "$ac_dir" && ac_dir=. + tmp_nm=$ac_dir/$lt_tmp_nm + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the 'sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty + case $build_os in + mingw*) lt_bad_file=conftest.nm/nofile ;; + *) lt_bad_file=/dev/null ;; + esac + case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in + *$lt_bad_file* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break 2 + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break 2 + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + ;; + esac + fi + done + IFS=$lt_save_ifs + done + : ${lt_cv_path_NM=no} +fi]) +if test no != "$lt_cv_path_NM"; then + NM=$lt_cv_path_NM +else + # Didn't find any BSD compatible name lister, look for dumpbin. + if test -n "$DUMPBIN"; then : + # Let the user override the test. + else + AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :) + case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in + *COFF*) + DUMPBIN="$DUMPBIN -symbols -headers" + ;; + *) + DUMPBIN=: + ;; + esac + fi + AC_SUBST([DUMPBIN]) + if test : != "$DUMPBIN"; then + NM=$DUMPBIN + fi +fi +test -z "$NM" && NM=nm +AC_SUBST([NM]) +_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl + +AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], + [lt_cv_nm_interface="BSD nm" + echo "int some_variable = 0;" > conftest.$ac_ext + (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$ac_compile" 2>conftest.err) + cat conftest.err >&AS_MESSAGE_LOG_FD + (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) + cat conftest.err >&AS_MESSAGE_LOG_FD + (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD) + cat conftest.out >&AS_MESSAGE_LOG_FD + if $GREP 'External.*some_variable' conftest.out > /dev/null; then + lt_cv_nm_interface="MS dumpbin" + fi + rm -f conftest*]) +])# LT_PATH_NM + +# Old names: +AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) +AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_PROG_NM], []) +dnl AC_DEFUN([AC_PROG_NM], []) + +# _LT_CHECK_SHAREDLIB_FROM_LINKLIB +# -------------------------------- +# how to determine the name of the shared library +# associated with a specific link library. +# -- PORTME fill in with the dynamic library characteristics +m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB], +[m4_require([_LT_DECL_EGREP]) +m4_require([_LT_DECL_OBJDUMP]) +m4_require([_LT_DECL_DLLTOOL]) +AC_CACHE_CHECK([how to associate runtime and link libraries], +lt_cv_sharedlib_from_linklib_cmd, +[lt_cv_sharedlib_from_linklib_cmd='unknown' + +case $host_os in +cygwin* | mingw* | pw32* | cegcc*) + # two different shell functions defined in ltmain.sh; + # decide which one to use based on capabilities of $DLLTOOL + case `$DLLTOOL --help 2>&1` in + *--identify-strict*) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib + ;; + *) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback + ;; + esac + ;; +*) + # fallback: assume linklib IS sharedlib + lt_cv_sharedlib_from_linklib_cmd=$ECHO + ;; +esac +]) +sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd +test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO + +_LT_DECL([], [sharedlib_from_linklib_cmd], [1], + [Command to associate shared and link libraries]) +])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB + + +# _LT_PATH_MANIFEST_TOOL +# ---------------------- +# locate the manifest tool +m4_defun([_LT_PATH_MANIFEST_TOOL], +[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :) +test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt +AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool], + [lt_cv_path_mainfest_tool=no + echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD + $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out + cat conftest.err >&AS_MESSAGE_LOG_FD + if $GREP 'Manifest Tool' conftest.out > /dev/null; then + lt_cv_path_mainfest_tool=yes + fi + rm -f conftest*]) +if test yes != "$lt_cv_path_mainfest_tool"; then + MANIFEST_TOOL=: +fi +_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl +])# _LT_PATH_MANIFEST_TOOL + + +# _LT_DLL_DEF_P([FILE]) +# --------------------- +# True iff FILE is a Windows DLL '.def' file. +# Keep in sync with func_dll_def_p in the libtool script +AC_DEFUN([_LT_DLL_DEF_P], +[dnl + test DEF = "`$SED -n dnl + -e '\''s/^[[ ]]*//'\'' dnl Strip leading whitespace + -e '\''/^\(;.*\)*$/d'\'' dnl Delete empty lines and comments + -e '\''s/^\(EXPORTS\|LIBRARY\)\([[ ]].*\)*$/DEF/p'\'' dnl + -e q dnl Only consider the first "real" line + $1`" dnl +])# _LT_DLL_DEF_P + + +# LT_LIB_M +# -------- +# check for math library +AC_DEFUN([LT_LIB_M], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +LIBM= +case $host in +*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*) + # These system don't have libm, or don't need it + ;; +*-ncr-sysv4.3*) + AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM=-lmw) + AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") + ;; +*) + AC_CHECK_LIB(m, cos, LIBM=-lm) + ;; +esac +AC_SUBST([LIBM]) +])# LT_LIB_M + +# Old name: +AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_CHECK_LIBM], []) + + +# _LT_COMPILER_NO_RTTI([TAGNAME]) +# ------------------------------- +m4_defun([_LT_COMPILER_NO_RTTI], +[m4_require([_LT_TAG_COMPILER])dnl + +_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + +if test yes = "$GCC"; then + case $cc_basename in + nvcc*) + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;; + *) + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;; + esac + + _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], + lt_cv_prog_compiler_rtti_exceptions, + [-fno-rtti -fno-exceptions], [], + [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) +fi +_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], + [Compiler flag to turn off builtin functions]) +])# _LT_COMPILER_NO_RTTI + + +# _LT_CMD_GLOBAL_SYMBOLS +# ---------------------- +m4_defun([_LT_CMD_GLOBAL_SYMBOLS], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([LT_PATH_NM])dnl +AC_REQUIRE([LT_PATH_LD])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_TAG_COMPILER])dnl + +# Check for command to grab the raw symbol name followed by C symbol from nm. +AC_MSG_CHECKING([command to parse $NM output from $compiler object]) +AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], +[ +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[[BCDEGRST]]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[[BCDT]]' + ;; +cygwin* | mingw* | pw32* | cegcc*) + symcode='[[ABCDGISTW]]' + ;; +hpux*) + if test ia64 = "$host_cpu"; then + symcode='[[ABCDEGRST]]' + fi + ;; +irix* | nonstopux*) + symcode='[[BCDEGRST]]' + ;; +osf*) + symcode='[[BCDEGQRST]]' + ;; +solaris*) + symcode='[[BDRT]]' + ;; +sco3.2v5*) + symcode='[[DT]]' + ;; +sysv4.2uw2*) + symcode='[[DT]]' + ;; +sysv5* | sco5v6* | unixware* | OpenUNIX*) + symcode='[[ABDT]]' + ;; +sysv4) + symcode='[[DFNSTU]]' + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[[ABCDGIRSTW]]' ;; +esac + +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Gets list of data symbols to import. + lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'" + # Adjust the below global symbol transforms to fixup imported variables. + lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'" + lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'" + lt_c_name_lib_hook="\ + -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\ + -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'" +else + # Disable hooks by default. + lt_cv_sys_global_symbol_to_import= + lt_cdecl_hook= + lt_c_name_hook= + lt_c_name_lib_hook= +fi + +# Transform an extracted symbol line into a proper C declaration. +# Some systems (esp. on ia64) link data and code symbols differently, +# so use this general approach. +lt_cv_sys_global_symbol_to_cdecl="sed -n"\ +$lt_cdecl_hook\ +" -e 's/^T .* \(.*\)$/extern int \1();/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n"\ +$lt_c_name_hook\ +" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'" + +# Transform an extracted symbol line into symbol name with lib prefix and +# symbol address. +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\ +$lt_c_name_lib_hook\ +" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ +" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'" + +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# Try without a prefix underscore, then with it. +for ac_symprfx in "" "_"; do + + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" + + # Write the raw and C identifiers. + if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Fake it for dumpbin and say T for any non-static function, + # D for any global variable and I for any imported variable. + # Also find C++ and __fastcall symbols from MSVC++, + # which start with @ or ?. + lt_cv_sys_global_symbol_pipe="$AWK ['"\ +" {last_section=section; section=\$ 3};"\ +" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ +" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\ +" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\ +" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\ +" \$ 0!~/External *\|/{next};"\ +" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ +" {if(hide[section]) next};"\ +" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\ +" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\ +" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\ +" ' prfx=^$ac_symprfx]" + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi + lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext <<_LT_EOF +#ifdef __cplusplus +extern "C" { +#endif +char nm_test_var; +void nm_test_func(void); +void nm_test_func(void){} +#ifdef __cplusplus +} +#endif +int main(){nm_test_var='a';nm_test_func();return(0);} +_LT_EOF + + if AC_TRY_EVAL(ac_compile); then + # Now try to grab the symbols. + nlist=conftest.nm + if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE +/* DATA imports from DLLs on WIN32 can't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT@&t@_DLSYM_CONST +#elif defined __osf__ +/* This system does not cope well with relocations in const data. */ +# define LT@&t@_DLSYM_CONST +#else +# define LT@&t@_DLSYM_CONST const +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +_LT_EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' + + cat <<_LT_EOF >> conftest.$ac_ext + +/* The mapping between symbol names and symbols. */ +LT@&t@_DLSYM_CONST struct { + const char *name; + void *address; +} +lt__PROGRAM__LTX_preloaded_symbols[[]] = +{ + { "@PROGRAM@", (void *) 0 }, +_LT_EOF + $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + cat <<\_LT_EOF >> conftest.$ac_ext + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt__PROGRAM__LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif +_LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_globsym_save_LIBS=$LIBS + lt_globsym_save_CFLAGS=$CFLAGS + LIBS=conftstm.$ac_objext + CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" + if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then + pipe_works=yes + fi + LIBS=$lt_globsym_save_LIBS + CFLAGS=$lt_globsym_save_CFLAGS + else + echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD + fi + else + echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD + cat conftest.$ac_ext >&5 + fi + rm -rf conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test yes = "$pipe_works"; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done +]) +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + AC_MSG_RESULT(failed) +else + AC_MSG_RESULT(ok) +fi + +# Response file support. +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + nm_file_list_spec='@' +elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then + nm_file_list_spec='@' +fi + +_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], + [Take the output of nm and produce a listing of raw symbols and C names]) +_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], + [Transform the output of nm in a proper C declaration]) +_LT_DECL([global_symbol_to_import], [lt_cv_sys_global_symbol_to_import], [1], + [Transform the output of nm into a list of symbols to manually relocate]) +_LT_DECL([global_symbol_to_c_name_address], + [lt_cv_sys_global_symbol_to_c_name_address], [1], + [Transform the output of nm in a C name address pair]) +_LT_DECL([global_symbol_to_c_name_address_lib_prefix], + [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], + [Transform the output of nm in a C name address pair when lib prefix is needed]) +_LT_DECL([nm_interface], [lt_cv_nm_interface], [1], + [The name lister interface]) +_LT_DECL([], [nm_file_list_spec], [1], + [Specify filename containing input files for $NM]) +]) # _LT_CMD_GLOBAL_SYMBOLS + + +# _LT_COMPILER_PIC([TAGNAME]) +# --------------------------- +m4_defun([_LT_COMPILER_PIC], +[m4_require([_LT_TAG_COMPILER])dnl +_LT_TAGVAR(lt_prog_compiler_wl, $1)= +_LT_TAGVAR(lt_prog_compiler_pic, $1)= +_LT_TAGVAR(lt_prog_compiler_static, $1)= + +m4_if([$1], [CXX], [ + # C++ specific cases for pic, static, wl, etc. + if test yes = "$GXX"; then + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test ia64 = "$host_cpu"; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the '-m68020' flag to GCC prevents building anything better, + # like '-m68040'. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + mingw* | cygwin* | os2* | pw32* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + case $host_os in + os2*) + _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static' + ;; + esac + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + *djgpp*) + # DJGPP does not support shared libraries at all + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + _LT_TAGVAR(lt_prog_compiler_static, $1)= + ;; + interix[[3-9]]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + *qnx* | *nto*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + else + case $host_os in + aix[[4-9]]*) + # All AIX code is PIC. + if test ia64 = "$host_cpu"; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + chorus*) + case $cc_basename in + cxch68*) + # Green Hills C++ Compiler + # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + ;; + esac + ;; + mingw* | cygwin* | os2* | pw32* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + dgux*) + case $cc_basename in + ec++*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + ghcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + freebsd* | dragonfly*) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive' + if test ia64 != "$host_cpu"; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + fi + ;; + aCC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive' + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + ;; + *) + ;; + esac + ;; + interix*) + # This is c89, which is MS Visual C++ (no shared libs) + # Anyone wants to do a port? + ;; + irix5* | irix6* | nonstopux*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + # CC pic flag -KPIC is the default. + ;; + *) + ;; + esac + ;; + linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) + case $cc_basename in + KCC*) + # KAI C++ Compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + ecpc* ) + # old Intel C++ for x86_64, which still supported -KPIC. + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + icpc* ) + # Intel C++, used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + pgCC* | pgcpp*) + # Portland Group C++ compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + cxx*) + # Compaq C++ + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*) + # IBM XL 8.0, 9.0 on PPC and BlueGene + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + esac + ;; + esac + ;; + lynxos*) + ;; + m88k*) + ;; + mvs*) + case $cc_basename in + cxx*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' + ;; + *) + ;; + esac + ;; + netbsd*) + ;; + *qnx* | *nto*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + ;; + RCC*) + # Rational C++ 2.4.1 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + cxx*) + # Digital/Compaq C++ + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + *) + ;; + esac + ;; + psos*) + ;; + solaris*) + case $cc_basename in + CC* | sunCC*) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + gcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + ;; + *) + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + lcc*) + # Lucid + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + esac + ;; + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + *) + ;; + esac + ;; + vxworks*) + ;; + *) + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +], +[ + if test yes = "$GCC"; then + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test ia64 = "$host_cpu"; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the '-m68020' flag to GCC prevents building anything better, + # like '-m68040'. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + case $host_os in + os2*) + _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static' + ;; + esac + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + _LT_TAGVAR(lt_prog_compiler_static, $1)= + ;; + + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + + interix[[3-9]]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + enable_shared=no + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + + case $cc_basename in + nvcc*) # Cuda Compiler Driver 2.2 + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker ' + if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)" + fi + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + if test ia64 = "$host_cpu"; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + case $cc_basename in + nagfor*) + # NAG Fortran compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + esac + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + case $host_os in + os2*) + _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static' + ;; + esac + ;; + + hpux9* | hpux10* | hpux11*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC (with -KPIC) is the default. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) + case $cc_basename in + # old Intel for x86_64, which still supported -KPIC. + ecc*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + # icc used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + icc* | ifort*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + # Lahey Fortran 8.1. + lf95*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' + _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' + ;; + nagfor*) + # NAG Fortran compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + tcc*) + # Fabrice Bellard et al's Tiny C Compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + ccc*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All Alpha code is PIC. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + xl* | bgxl* | bgf* | mpixl*) + # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='' + ;; + *Sun\ F* | *Sun*Fortran*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + *Sun\ C*) + # Sun C 5.9 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + ;; + *Intel*\ [[CF]]*Compiler*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + *Portland\ Group*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + esac + ;; + esac + ;; + + newsos6) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + + osf3* | osf4* | osf5*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All OSF/1 code is PIC. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + rdos*) + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + solaris*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + case $cc_basename in + f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; + *) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; + esac + ;; + + sunos4*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + unicos*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + + uts4*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + *) + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +]) +case $host_os in + # For platforms that do not support PIC, -DPIC is meaningless: + *djgpp*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" + ;; +esac + +AC_CACHE_CHECK([for $compiler option to produce PIC], + [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)], + [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) +_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1) + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then + _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], + [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], + [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], + [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in + "" | " "*) ;; + *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; + esac], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) +fi +_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], + [Additional compiler flags for building library objects]) + +_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], + [How to pass a linker flag through the compiler]) +# +# Check to make sure the static flag actually works. +# +wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" +_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], + _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), + $lt_tmp_static_flag, + [], + [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) +_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], + [Compiler flag to prevent dynamic linking]) +])# _LT_COMPILER_PIC + + +# _LT_LINKER_SHLIBS([TAGNAME]) +# ---------------------------- +# See if the linker supports building shared libraries. +m4_defun([_LT_LINKER_SHLIBS], +[AC_REQUIRE([LT_PATH_LD])dnl +AC_REQUIRE([LT_PATH_NM])dnl +m4_require([_LT_PATH_MANIFEST_TOOL])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl +m4_require([_LT_TAG_COMPILER])dnl +AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +m4_if([$1], [CXX], [ + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] + case $host_os in + aix[[4-9]]*) + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to GNU nm, but means don't demangle to AIX nm. + # Without the "-l" option, or with the "-B" option, AIX nm treats + # weak defined symbols like other global defined symbols, whereas + # GNU nm marks them as "W". + # While the 'weak' keyword is ignored in the Export File, we need + # it in the Import File for the 'aix-soname' feature, so we have + # to replace the "-B" option with "-P" for AIX nm. + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' + else + _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' + fi + ;; + pw32*) + _LT_TAGVAR(export_symbols_cmds, $1)=$ltdll_cmds + ;; + cygwin* | mingw* | cegcc*) + case $cc_basename in + cl*) + _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' + ;; + *) + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] + ;; + esac + ;; + *) + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; + esac +], [ + runpath_var= + _LT_TAGVAR(allow_undefined_flag, $1)= + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(archive_cmds, $1)= + _LT_TAGVAR(archive_expsym_cmds, $1)= + _LT_TAGVAR(compiler_needs_object, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + _LT_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(hardcode_automatic, $1)=no + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_TAGVAR(hardcode_libdir_separator, $1)= + _LT_TAGVAR(hardcode_minus_L, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_TAGVAR(inherit_rpath, $1)=no + _LT_TAGVAR(link_all_deplibs, $1)=unknown + _LT_TAGVAR(module_cmds, $1)= + _LT_TAGVAR(module_expsym_cmds, $1)= + _LT_TAGVAR(old_archive_from_new_cmds, $1)= + _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= + _LT_TAGVAR(thread_safe_flag_spec, $1)= + _LT_TAGVAR(whole_archive_flag_spec, $1)= + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + _LT_TAGVAR(include_expsyms, $1)= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ' (' and ')$', so one must not match beginning or + # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc', + # as well as any symbol that contains 'd'. + _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + # Exclude shared library initialization/finalization symbols. +dnl Note also adjust exclude_expsyms for C++ above. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test yes != "$GCC"; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd* | bitrig*) + with_gnu_ld=no + ;; + esac + + _LT_TAGVAR(ld_shlibs, $1)=yes + + # On some targets, GNU ld is compatible enough with the native linker + # that we're better off using the native interface for both. + lt_use_gnu_ld_interface=no + if test yes = "$with_gnu_ld"; then + case $host_os in + aix*) + # The AIX port of GNU ld has always aspired to compatibility + # with the native linker. However, as the warning in the GNU ld + # block says, versions before 2.19.5* couldn't really create working + # shared libraries, regardless of the interface used. + case `$LD -v 2>&1` in + *\ \(GNU\ Binutils\)\ 2.19.5*) ;; + *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;; + *\ \(GNU\ Binutils\)\ [[3-9]]*) ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + fi + + if test yes = "$lt_use_gnu_ld_interface"; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='$wl' + + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then + _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + supports_anon_versioning=no + case `$LD -v | $SED -e 's/([^)]\+)\s\+//' 2>&1` in + *GNU\ gold*) supports_anon_versioning=yes ;; + *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + + # See if GNU ld supports shared libraries. + case $host_os in + aix[[3-9]]*) + # On AIX/PPC, the GNU linker is very broken + if test ia64 != "$host_cpu"; then + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: the GNU linker, at least up to release 2.19, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to install binutils +*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. +*** You will then need to restart the configuration process. + +_LT_EOF + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='' + ;; + m68k) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file, use it as + # is; otherwise, prepend EXPORTS... + _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + haiku*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + os2*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + shrext_cmds=.dll + _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; + + interix[[3-9]]*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + tmp_diet=no + if test linux-dietlibc = "$host_os"; then + case $cc_basename in + diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) + esac + fi + if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ + && test no = "$tmp_diet" + then + tmp_addflag=' $pic_flag' + tmp_sharedflag='-shared' + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group f77 and f90 compilers + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + lf95*) # Lahey Fortran 8.1 + _LT_TAGVAR(whole_archive_flag_spec, $1)= + tmp_sharedflag='--shared' ;; + nagfor*) # NAGFOR 5.3 + tmp_sharedflag='-Wl,-shared' ;; + xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) + tmp_sharedflag='-qmkshrobj' + tmp_addflag= ;; + nvcc*) # Cuda Compiler Driver 2.2 + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + ;; + esac + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C 5.9 + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + tmp_sharedflag='-G' ;; + *Sun\ F*) # Sun Fortran 8.3 + tmp_sharedflag='-G' ;; + esac + _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + + if test yes = "$supports_anon_versioning"; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' + fi + + case $cc_basename in + tcc*) + _LT_TAGVAR(export_dynamic_flag_spec, $1)='-rdynamic' + ;; + xlf* | bgf* | bgxlf* | mpixlf*) + # IBM XL Fortran 10.1 on PPC cannot create shared libs itself + _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + if test yes = "$supports_anon_versioning"; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris*) + if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + sunos4*) + _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + + if test no = "$_LT_TAGVAR(ld_shlibs, $1)"; then + runpath_var= + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + _LT_TAGVAR(hardcode_direct, $1)=unsupported + fi + ;; + + aix[[4-9]]*) + if test ia64 = "$host_cpu"; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag= + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to GNU nm, but means don't demangle to AIX nm. + # Without the "-l" option, or with the "-B" option, AIX nm treats + # weak defined symbols like other global defined symbols, whereas + # GNU nm marks them as "W". + # While the 'weak' keyword is ignored in the Export File, we need + # it in the Import File for the 'aix-soname' feature, so we have + # to replace the "-B" option with "-P" for AIX nm. + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' + else + _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # have runtime linking enabled, and use it for executables. + # For shared libraries, we enable/disable runtime linking + # depending on the kind of the shared library created - + # when "with_aix_soname,aix_use_runtimelinking" is: + # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables + # "aix,yes" lib.so shared, rtl:yes, for executables + # lib.a static archive + # "both,no" lib.so.V(shr.o) shared, rtl:yes + # lib.a(lib.so.V) shared, rtl:no, for executables + # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a(lib.so.V) shared, rtl:no + # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a static archive + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) + for ld_flag in $LDFLAGS; do + if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then + aix_use_runtimelinking=yes + break + fi + done + if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then + # With aix-soname=svr4, we create the lib.so.V shared archives only, + # so we don't have lib.a shared libs to link our executables. + # We have to force runtime linking in this case. + aix_use_runtimelinking=yes + LDFLAGS="$LDFLAGS -Wl,-brtl" + fi + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_TAGVAR(archive_cmds, $1)='' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='$wl-f,' + case $with_aix_soname,$aix_use_runtimelinking in + aix,*) ;; # traditional, no import file + svr4,* | *,yes) # use import file + # The Import File defines what to hardcode. + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=no + ;; + esac + + if test yes = "$GCC"; then + case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`$CC -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + _LT_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)= + fi + ;; + esac + shared_flag='-shared' + if test yes = "$aix_use_runtimelinking"; then + shared_flag="$shared_flag "'$wl-G' + fi + # Need to ensure runtime linking is disabled for the traditional + # shared library, or the linker may eventually find shared libraries + # /with/ Import File - we do not want to mix them. + shared_flag_aix='-shared' + shared_flag_svr4='-shared $wl-G' + else + # not using gcc + if test ia64 = "$host_cpu"; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test yes = "$aix_use_runtimelinking"; then + shared_flag='$wl-G' + else + shared_flag='$wl-bM:SRE' + fi + shared_flag_aix='$wl-bM:SRE' + shared_flag_svr4='$wl-G' + fi + fi + + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + _LT_TAGVAR(always_export_symbols, $1)=yes + if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath" + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag + else + if test ia64 = "$host_cpu"; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib' + _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok' + _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok' + if test yes = "$with_gnu_ld"; then + # We only use this code for GNU lds that support --whole-archive. + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' + # -brtl affects multiple linker settings, -berok does not and is overridden later + compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`' + if test svr4 != "$with_aix_soname"; then + # This is similar to how AIX traditionally builds its shared libraries. + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' + fi + if test aix != "$with_aix_soname"; then + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' + else + # used by -dlpreopen to get the symbols + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir' + fi + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d' + fi + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='' + ;; + m68k) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + ;; + + bsdi[[45]]*) + _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + case $cc_basename in + cl*) + # Native MSVC + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=.dll + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' + _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then + cp "$export_symbols" "$output_objdir/$soname.def"; + echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; + else + $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' + # Don't use ranlib + _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' + _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile=$lt_outputfile.exe + lt_tool_outputfile=$lt_tool_outputfile.exe + ;; + esac~ + if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # Assume MSVC wrapper + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=.dll + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + # FIXME: Should let the user specify the lib program. + _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; + esac + ;; + + darwin* | rhapsody*) + _LT_DARWIN_LINKER_FEATURES($1) + ;; + + dgux*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2.*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + hpux9*) + if test yes = "$GCC"; then + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' + else + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_direct, $1)=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' + ;; + + hpux10*) + if test yes,no = "$GCC,$with_gnu_ld"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test no = "$with_gnu_ld"; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + fi + ;; + + hpux11*) + if test yes,no = "$GCC,$with_gnu_ld"; then + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + m4_if($1, [], [ + # Older versions of the 11.00 compiler do not understand -b yet + # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) + _LT_LINKER_OPTION([if $CC understands -b], + _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b], + [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'], + [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])], + [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags']) + ;; + esac + fi + if test no = "$with_gnu_ld"; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + case $host_cpu in + hppa*64*|ia64*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + *) + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test yes = "$GCC"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. + # This should be the same for all languages, so no per-tag cache variable. + AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol], + [lt_cv_irix_exported_symbol], + [save_LDFLAGS=$LDFLAGS + LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null" + AC_LINK_IFELSE( + [AC_LANG_SOURCE( + [AC_LANG_CASE([C], [[int foo (void) { return 0; }]], + [C++], [[int foo (void) { return 0; }]], + [Fortran 77], [[ + subroutine foo + end]], + [Fortran], [[ + subroutine foo + end]])])], + [lt_cv_irix_exported_symbol=yes], + [lt_cv_irix_exported_symbol=no]) + LDFLAGS=$save_LDFLAGS]) + if test yes = "$lt_cv_irix_exported_symbol"; then + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib' + fi + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(inherit_rpath, $1)=yes + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + linux*) + case $cc_basename in + tcc*) + # Fabrice Bellard et al's Tiny C Compiler + _LT_TAGVAR(ld_shlibs, $1)=yes + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + newsos6) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *nto* | *qnx*) + ;; + + openbsd* | bitrig*) + if test -f /usr/libexec/ld.so; then + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' + fi + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + os2*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + shrext_cmds=.dll + _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; + + osf3*) + if test yes = "$GCC"; then + _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + else + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test yes = "$GCC"; then + _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + else + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp' + + # Both c and cxx compiler support -rpath directly + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + solaris*) + _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' + if test yes = "$GCC"; then + wlarc='$wl' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) + wlarc='' + _LT_TAGVAR(archive_cmds, $1)='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + ;; + *) + wlarc='$wl' + _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + ;; + esac + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands '-z linker_flag'. GCC discards it without '$wl', + # but is careful enough not to reorder. + # Supported since Solaris 2.6 (maybe 2.5.1?) + if test yes = "$GCC"; then + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' + fi + ;; + esac + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + sunos4*) + if test sequent = "$host_vendor"; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4) + case $host_vendor in + sni) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' + _LT_TAGVAR(hardcode_direct, $1)=no + ;; + motorola) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4.3*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + _LT_TAGVAR(ld_shlibs, $1)=yes + fi + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) + _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + + if test yes = "$GCC"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We CANNOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text' + _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport' + runpath_var='LD_RUN_PATH' + + if test yes = "$GCC"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + uts4*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + + if test sni = "$host_vendor"; then + case $host in + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Blargedynsym' + ;; + esac + fi + fi +]) +AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) +test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no + +_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld + +_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl +_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl +_LT_DECL([], [extract_expsyms_cmds], [2], + [The commands to extract the exported symbol list from a shared archive]) + +# +# Do we need to explicitly link libc? +# +case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in +x|xyes) + # Assume -lc should be added + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + + if test yes,yes = "$GCC,$enable_shared"; then + case $_LT_TAGVAR(archive_cmds, $1) in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + AC_CACHE_CHECK([whether -lc should be explicitly linked in], + [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1), + [$RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if AC_TRY_EVAL(ac_compile) 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) + pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) + _LT_TAGVAR(allow_undefined_flag, $1)= + if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) + then + lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no + else + lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes + fi + _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + ]) + _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1) + ;; + esac + fi + ;; +esac + +_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], + [Whether or not to add -lc for building shared libraries]) +_LT_TAGDECL([allow_libtool_libs_with_static_runtimes], + [enable_shared_with_static_runtimes], [0], + [Whether or not to disallow shared libs when runtime libs are static]) +_LT_TAGDECL([], [export_dynamic_flag_spec], [1], + [Compiler flag to allow reflexive dlopens]) +_LT_TAGDECL([], [whole_archive_flag_spec], [1], + [Compiler flag to generate shared objects directly from archives]) +_LT_TAGDECL([], [compiler_needs_object], [1], + [Whether the compiler copes with passing no objects directly]) +_LT_TAGDECL([], [old_archive_from_new_cmds], [2], + [Create an old-style archive from a shared archive]) +_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], + [Create a temporary old-style archive to link instead of a shared archive]) +_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) +_LT_TAGDECL([], [archive_expsym_cmds], [2]) +_LT_TAGDECL([], [module_cmds], [2], + [Commands used to build a loadable module if different from building + a shared archive.]) +_LT_TAGDECL([], [module_expsym_cmds], [2]) +_LT_TAGDECL([], [with_gnu_ld], [1], + [Whether we are building with GNU ld or not]) +_LT_TAGDECL([], [allow_undefined_flag], [1], + [Flag that allows shared libraries with undefined symbols to be built]) +_LT_TAGDECL([], [no_undefined_flag], [1], + [Flag that enforces no undefined symbols]) +_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], + [Flag to hardcode $libdir into a binary during linking. + This must work even if $libdir does not exist]) +_LT_TAGDECL([], [hardcode_libdir_separator], [1], + [Whether we need a single "-rpath" flag with a separated argument]) +_LT_TAGDECL([], [hardcode_direct], [0], + [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes + DIR into the resulting binary]) +_LT_TAGDECL([], [hardcode_direct_absolute], [0], + [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes + DIR into the resulting binary and the resulting library dependency is + "absolute", i.e impossible to change by setting $shlibpath_var if the + library is relocated]) +_LT_TAGDECL([], [hardcode_minus_L], [0], + [Set to "yes" if using the -LDIR flag during linking hardcodes DIR + into the resulting binary]) +_LT_TAGDECL([], [hardcode_shlibpath_var], [0], + [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR + into the resulting binary]) +_LT_TAGDECL([], [hardcode_automatic], [0], + [Set to "yes" if building a shared library automatically hardcodes DIR + into the library and all subsequent libraries and executables linked + against it]) +_LT_TAGDECL([], [inherit_rpath], [0], + [Set to yes if linker adds runtime paths of dependent libraries + to runtime path list]) +_LT_TAGDECL([], [link_all_deplibs], [0], + [Whether libtool must link a program against all its dependency libraries]) +_LT_TAGDECL([], [always_export_symbols], [0], + [Set to "yes" if exported symbols are required]) +_LT_TAGDECL([], [export_symbols_cmds], [2], + [The commands to list exported symbols]) +_LT_TAGDECL([], [exclude_expsyms], [1], + [Symbols that should not be listed in the preloaded symbols]) +_LT_TAGDECL([], [include_expsyms], [1], + [Symbols that must always be exported]) +_LT_TAGDECL([], [prelink_cmds], [2], + [Commands necessary for linking programs (against libraries) with templates]) +_LT_TAGDECL([], [postlink_cmds], [2], + [Commands necessary for finishing linking programs]) +_LT_TAGDECL([], [file_list_spec], [1], + [Specify filename containing input files]) +dnl FIXME: Not yet implemented +dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], +dnl [Compiler flag to generate thread safe objects]) +])# _LT_LINKER_SHLIBS + + +# _LT_LANG_C_CONFIG([TAG]) +# ------------------------ +# Ensure that the configuration variables for a C compiler are suitably +# defined. These variables are subsequently used by _LT_CONFIG to write +# the compiler configuration to 'libtool'. +m4_defun([_LT_LANG_C_CONFIG], +[m4_require([_LT_DECL_EGREP])dnl +lt_save_CC=$CC +AC_LANG_PUSH(C) + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}' + +_LT_TAG_COMPILER +# Save the default compiler, since it gets overwritten when the other +# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. +compiler_DEFAULT=$CC + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + LT_SYS_DLOPEN_SELF + _LT_CMD_STRIPLIB + + # Report what library types will actually be built + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test no = "$can_build_shared" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test yes = "$enable_shared" && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + + aix[[4-9]]*) + if test ia64 != "$host_cpu"; then + case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in + yes,aix,yes) ;; # shared object as lib.so file only + yes,svr4,*) ;; # shared object as lib.so archive member only + yes,*) enable_static=no ;; # shared object in lib.a archive as well + esac + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test yes = "$enable_shared" || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_CONFIG($1) +fi +AC_LANG_POP +CC=$lt_save_CC +])# _LT_LANG_C_CONFIG + + +# _LT_LANG_CXX_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for a C++ compiler are suitably +# defined. These variables are subsequently used by _LT_CONFIG to write +# the compiler configuration to 'libtool'. +m4_defun([_LT_LANG_CXX_CONFIG], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_PATH_MANIFEST_TOOL])dnl +if test -n "$CXX" && ( test no != "$CXX" && + ( (test g++ = "$CXX" && `g++ -v >/dev/null 2>&1` ) || + (test g++ != "$CXX"))); then + AC_PROG_CXXCPP +else + _lt_caught_CXX_error=yes +fi + +AC_LANG_PUSH(C++) +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(compiler_needs_object, $1)=no +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for C++ test sources. +ac_ext=cpp + +# Object file extension for compiled C++ test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the CXX compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test yes != "$_lt_caught_CXX_error"; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="int some_variable = 0;" + + # Code to be used in simple link tests + lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC=$CC + lt_save_CFLAGS=$CFLAGS + lt_save_LD=$LD + lt_save_GCC=$GCC + GCC=$GXX + lt_save_with_gnu_ld=$with_gnu_ld + lt_save_path_LD=$lt_cv_path_LD + if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then + lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx + else + $as_unset lt_cv_prog_gnu_ld + fi + if test -n "${lt_cv_path_LDCXX+set}"; then + lt_cv_path_LD=$lt_cv_path_LDCXX + else + $as_unset lt_cv_path_LD + fi + test -z "${LDCXX+set}" || LD=$LDCXX + CC=${CXX-"c++"} + CFLAGS=$CXXFLAGS + compiler=$CC + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + + if test -n "$compiler"; then + # We don't want -fno-exception when compiling C++ code, so set the + # no_builtin_flag separately + if test yes = "$GXX"; then + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' + else + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + fi + + if test yes = "$GXX"; then + # Set up default GNU C++ configuration + + LT_PATH_LD + + # Check if GNU C++ uses GNU ld as the underlying linker, since the + # archiving commands below assume that GNU ld is being used. + if test yes = "$with_gnu_ld"; then + _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' + + # If archive_cmds runs LD, not CC, wlarc should be empty + # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to + # investigate it a little bit more. (MM) + wlarc='$wl' + + # ancient GNU ld didn't support --whole-archive et. al. + if eval "`$CC -print-prog-name=ld` --help 2>&1" | + $GREP 'no-whole-archive' > /dev/null; then + _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + with_gnu_ld=no + wlarc= + + # A generic and very simple default shared library creation + # command for GNU C++ for the case where it uses the native + # linker, instead of GNU ld. If possible, this setting should + # overridden to take advantage of the native linker features on + # the platform it is being used on. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + fi + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + + else + GXX=no + with_gnu_ld=no + wlarc= + fi + + # PORTME: fill in a description of your system's C++ link characteristics + AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) + _LT_TAGVAR(ld_shlibs, $1)=yes + case $host_os in + aix3*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aix[[4-9]]*) + if test ia64 = "$host_cpu"; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag= + else + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # have runtime linking enabled, and use it for executables. + # For shared libraries, we enable/disable runtime linking + # depending on the kind of the shared library created - + # when "with_aix_soname,aix_use_runtimelinking" is: + # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables + # "aix,yes" lib.so shared, rtl:yes, for executables + # lib.a static archive + # "both,no" lib.so.V(shr.o) shared, rtl:yes + # lib.a(lib.so.V) shared, rtl:no, for executables + # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a(lib.so.V) shared, rtl:no + # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a static archive + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) + for ld_flag in $LDFLAGS; do + case $ld_flag in + *-brtl*) + aix_use_runtimelinking=yes + break + ;; + esac + done + if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then + # With aix-soname=svr4, we create the lib.so.V shared archives only, + # so we don't have lib.a shared libs to link our executables. + # We have to force runtime linking in this case. + aix_use_runtimelinking=yes + LDFLAGS="$LDFLAGS -Wl,-brtl" + fi + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_TAGVAR(archive_cmds, $1)='' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='$wl-f,' + case $with_aix_soname,$aix_use_runtimelinking in + aix,*) ;; # no import file + svr4,* | *,yes) # use import file + # The Import File defines what to hardcode. + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=no + ;; + esac + + if test yes = "$GXX"; then + case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`$CC -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + _LT_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)= + fi + esac + shared_flag='-shared' + if test yes = "$aix_use_runtimelinking"; then + shared_flag=$shared_flag' $wl-G' + fi + # Need to ensure runtime linking is disabled for the traditional + # shared library, or the linker may eventually find shared libraries + # /with/ Import File - we do not want to mix them. + shared_flag_aix='-shared' + shared_flag_svr4='-shared $wl-G' + else + # not using gcc + if test ia64 = "$host_cpu"; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test yes = "$aix_use_runtimelinking"; then + shared_flag='$wl-G' + else + shared_flag='$wl-bM:SRE' + fi + shared_flag_aix='$wl-bM:SRE' + shared_flag_svr4='$wl-G' + fi + fi + + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to + # export. + _LT_TAGVAR(always_export_symbols, $1)=yes + if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + # The "-G" linker flag allows undefined symbols. + _LT_TAGVAR(no_undefined_flag, $1)='-bernotok' + # Determine the default libpath from the value encoded in an empty + # executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath" + + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag + else + if test ia64 = "$host_cpu"; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib' + _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok' + _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok' + if test yes = "$with_gnu_ld"; then + # We only use this code for GNU lds that support --whole-archive. + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' + # -brtl affects multiple linker settings, -berok does not and is overridden later + compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`' + if test svr4 != "$with_aix_soname"; then + # This is similar to how AIX traditionally builds its shared + # libraries. Need -bnortl late, we may have -brtl in LDFLAGS. + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' + fi + if test aix != "$with_aix_soname"; then + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' + else + # used by -dlpreopen to get the symbols + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir' + fi + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d' + fi + fi + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + chorus*) + case $cc_basename in + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + cygwin* | mingw* | pw32* | cegcc*) + case $GXX,$cc_basename in + ,cl* | no,cl*) + # Native MSVC + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=.dll + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' + _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then + cp "$export_symbols" "$output_objdir/$soname.def"; + echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; + else + $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + # Don't use ranlib + _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' + _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile=$lt_outputfile.exe + lt_tool_outputfile=$lt_tool_outputfile.exe + ;; + esac~ + func_to_tool_file "$lt_outputfile"~ + if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # g++ + # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file, use it as + # is; otherwise, prepend EXPORTS... + _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + darwin* | rhapsody*) + _LT_DARWIN_LINKER_FEATURES($1) + ;; + + os2*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + shrext_cmds=.dll + _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; + + dgux*) + case $cc_basename in + ec++*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + ghcx*) + # Green Hills C++ Compiler + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + freebsd2.*) + # C++ shared libraries reported to be fairly broken before + # switch to ELF + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + freebsd-elf*) + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + ;; + + freebsd* | dragonfly*) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + _LT_TAGVAR(ld_shlibs, $1)=yes + ;; + + haiku*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + hpux9*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aCC*) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test yes = "$GXX"; then + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + hpux10*|hpux11*) + if test no = "$with_gnu_ld"; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + case $host_cpu in + hppa*64*|ia64*) + ;; + *) + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' + ;; + esac + fi + case $host_cpu in + hppa*64*|ia64*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + *) + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + esac + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aCC*) + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test yes = "$GXX"; then + if test no = "$with_gnu_ld"; then + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + fi + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + interix[[3-9]]*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + irix5* | irix6*) + case $cc_basename in + CC*) + # SGI C++ + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + + # Archives containing C++ object files must be created using + # "CC -ar", where "CC" is the IRIX C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' + ;; + *) + if test yes = "$GXX"; then + if test no = "$with_gnu_ld"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib' + fi + fi + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + esac + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(inherit_rpath, $1)=yes + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' + ;; + icpc* | ecpc* ) + # Intel C++ + with_gnu_ld=yes + # version 8.0 and above of icpc choke on multiply defined symbols + # if we add $predep_objects and $postdep_objects, however 7.1 and + # earlier do not add the objects themselves. + case `$CC -V 2>&1` in + *"Version 7."*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + ;; + *) # Version 8.0 or newer + tmp_idyn= + case $host_cpu in + ia64*) tmp_idyn=' -i_dynamic';; + esac + _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + ;; + esac + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive' + ;; + pgCC* | pgcpp*) + # Portland Group C++ compiler + case `$CC -V` in + *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*) + _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ + compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' + _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ + $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ + $RANLIB $oldlib' + _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + ;; + *) # Version 6 and above use weak symbols + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl--rpath $wl$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + ;; + cxx*) + # Compaq C++ + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib $wl-retain-symbols-file $wl$export_symbols' + + runpath_var=LD_RUN_PATH + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' + ;; + xl* | mpixl* | bgxl*) + # IBM XL 8.0 on PPC, with GNU ld + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' + _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + if test yes = "$supports_anon_versioning"; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' + fi + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file $wl$export_symbols' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + + # Not sure whether something based on + # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 + # would be better. + output_verbose_link_cmd='func_echo_all' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + esac + ;; + esac + ;; + + lynxos*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + m88k*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + mvs*) + case $cc_basename in + cxx*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + fi + # Workaround some broken pre-1.5 toolchains + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' + ;; + + *nto* | *qnx*) + _LT_TAGVAR(ld_shlibs, $1)=yes + ;; + + openbsd* | bitrig*) + if test -f /usr/libexec/ld.so; then + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' + _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' + fi + output_verbose_link_cmd=func_echo_all + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Archives containing C++ object files must be created using + # the KAI C++ compiler. + case $host in + osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; + *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; + esac + ;; + RCC*) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + cxx*) + case $host in + osf3*) + _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + ;; + *) + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ + echo "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~ + $RM $lib.exp' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test yes,no = "$GXX,$with_gnu_ld"; then + _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*' + case $host in + osf3*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + psos*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + lcc*) + # Lucid + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + solaris*) + case $cc_basename in + CC* | sunCC*) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_TAGVAR(archive_cmds_need_lc,$1)=yes + _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G$allow_undefined_flag $wl-M $wl$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands '-z linker_flag'. + # Supported since Solaris 2.6 (maybe 2.5.1?) + _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' + ;; + esac + _LT_TAGVAR(link_all_deplibs, $1)=yes + + output_verbose_link_cmd='func_echo_all' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + gcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib' + + # The C++ compiler must be used to create the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' + ;; + *) + # GNU C++ compiler with Solaris linker + if test yes,no = "$GXX,$with_gnu_ld"; then + _LT_TAGVAR(no_undefined_flag, $1)=' $wl-z ${wl}defs' + if $CC --version | $GREP -v '^2\.7' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + else + # g++ 2.7 appears to require '-G' NOT '-shared' on this + # platform. + _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + fi + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $wl$libdir' + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' + ;; + esac + fi + ;; + esac + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) + _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We CANNOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text' + _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport' + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~ + '"$_LT_TAGVAR(old_archive_cmds, $1)" + _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~ + '"$_LT_TAGVAR(reload_cmds, $1)" + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + vxworks*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + + AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) + test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no + + _LT_TAGVAR(GCC, $1)=$GXX + _LT_TAGVAR(LD, $1)=$LD + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_SYS_HIDDEN_LIBDEPS($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + CC=$lt_save_CC + CFLAGS=$lt_save_CFLAGS + LDCXX=$LD + LD=$lt_save_LD + GCC=$lt_save_GCC + with_gnu_ld=$lt_save_with_gnu_ld + lt_cv_path_LDCXX=$lt_cv_path_LD + lt_cv_path_LD=$lt_save_path_LD + lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld + lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld +fi # test yes != "$_lt_caught_CXX_error" + +AC_LANG_POP +])# _LT_LANG_CXX_CONFIG + + +# _LT_FUNC_STRIPNAME_CNF +# ---------------------- +# func_stripname_cnf prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +# +# This function is identical to the (non-XSI) version of func_stripname, +# except this one can be used by m4 code that may be executed by configure, +# rather than the libtool script. +m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl +AC_REQUIRE([_LT_DECL_SED]) +AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH]) +func_stripname_cnf () +{ + case @S|@2 in + .*) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%\\\\@S|@2\$%%"`;; + *) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%@S|@2\$%%"`;; + esac +} # func_stripname_cnf +])# _LT_FUNC_STRIPNAME_CNF + + +# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) +# --------------------------------- +# Figure out "hidden" library dependencies from verbose +# compiler output when linking a shared library. +# Parse the compiler output and extract the necessary +# objects, libraries and library flags. +m4_defun([_LT_SYS_HIDDEN_LIBDEPS], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl +# Dependencies to place before and after the object being linked: +_LT_TAGVAR(predep_objects, $1)= +_LT_TAGVAR(postdep_objects, $1)= +_LT_TAGVAR(predeps, $1)= +_LT_TAGVAR(postdeps, $1)= +_LT_TAGVAR(compiler_lib_search_path, $1)= + +dnl we can't use the lt_simple_compile_test_code here, +dnl because it contains code intended for an executable, +dnl not a library. It's possible we should let each +dnl tag define a new lt_????_link_test_code variable, +dnl but it's only used here... +m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF +int a; +void foo (void) { a = 0; } +_LT_EOF +], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF +class Foo +{ +public: + Foo (void) { a = 0; } +private: + int a; +}; +_LT_EOF +], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF + subroutine foo + implicit none + integer*4 a + a=0 + return + end +_LT_EOF +], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF + subroutine foo + implicit none + integer a + a=0 + return + end +_LT_EOF +], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF +public class foo { + private int a; + public void bar (void) { + a = 0; + } +}; +_LT_EOF +], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF +package foo +func foo() { +} +_LT_EOF +]) + +_lt_libdeps_save_CFLAGS=$CFLAGS +case "$CC $CFLAGS " in #( +*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; +*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; +*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;; +esac + +dnl Parse the compiler output and extract the necessary +dnl objects, libraries and library flags. +if AC_TRY_EVAL(ac_compile); then + # Parse the compiler output and extract the necessary + # objects, libraries and library flags. + + # Sentinel used to keep track of whether or not we are before + # the conftest object file. + pre_test_object_deps_done=no + + for p in `eval "$output_verbose_link_cmd"`; do + case $prev$p in + + -L* | -R* | -l*) + # Some compilers place space between "-{L,R}" and the path. + # Remove the space. + if test x-L = "$p" || + test x-R = "$p"; then + prev=$p + continue + fi + + # Expand the sysroot to ease extracting the directories later. + if test -z "$prev"; then + case $p in + -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; + -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; + -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; + esac + fi + case $p in + =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; + esac + if test no = "$pre_test_object_deps_done"; then + case $prev in + -L | -R) + # Internal compiler library paths should come after those + # provided the user. The postdeps already come after the + # user supplied libs so there is no need to process them. + if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then + _LT_TAGVAR(compiler_lib_search_path, $1)=$prev$p + else + _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} $prev$p" + fi + ;; + # The "-l" case would never come before the object being + # linked, so don't bother handling this case. + esac + else + if test -z "$_LT_TAGVAR(postdeps, $1)"; then + _LT_TAGVAR(postdeps, $1)=$prev$p + else + _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} $prev$p" + fi + fi + prev= + ;; + + *.lto.$objext) ;; # Ignore GCC LTO objects + *.$objext) + # This assumes that the test object file only shows up + # once in the compiler output. + if test "$p" = "conftest.$objext"; then + pre_test_object_deps_done=yes + continue + fi + + if test no = "$pre_test_object_deps_done"; then + if test -z "$_LT_TAGVAR(predep_objects, $1)"; then + _LT_TAGVAR(predep_objects, $1)=$p + else + _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" + fi + else + if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then + _LT_TAGVAR(postdep_objects, $1)=$p + else + _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" + fi + fi + ;; + + *) ;; # Ignore the rest. + + esac + done + + # Clean up. + rm -f a.out a.exe +else + echo "libtool.m4: error: problem compiling $1 test program" +fi + +$RM -f confest.$objext +CFLAGS=$_lt_libdeps_save_CFLAGS + +# PORTME: override above test on systems where it is broken +m4_if([$1], [CXX], +[case $host_os in +interix[[3-9]]*) + # Interix 3.5 installs completely hosed .la files for C++, so rather than + # hack all around it, let's just trust "g++" to DTRT. + _LT_TAGVAR(predep_objects,$1)= + _LT_TAGVAR(postdep_objects,$1)= + _LT_TAGVAR(postdeps,$1)= + ;; +esac +]) + +case " $_LT_TAGVAR(postdeps, $1) " in +*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; +esac + _LT_TAGVAR(compiler_lib_search_dirs, $1)= +if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then + _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | $SED -e 's! -L! !g' -e 's!^ !!'` +fi +_LT_TAGDECL([], [compiler_lib_search_dirs], [1], + [The directories searched by this compiler when creating a shared library]) +_LT_TAGDECL([], [predep_objects], [1], + [Dependencies to place before and after the objects being linked to + create a shared library]) +_LT_TAGDECL([], [postdep_objects], [1]) +_LT_TAGDECL([], [predeps], [1]) +_LT_TAGDECL([], [postdeps], [1]) +_LT_TAGDECL([], [compiler_lib_search_path], [1], + [The library search path used internally by the compiler when linking + a shared library]) +])# _LT_SYS_HIDDEN_LIBDEPS + + +# _LT_LANG_F77_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for a Fortran 77 compiler are +# suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to 'libtool'. +m4_defun([_LT_LANG_F77_CONFIG], +[AC_LANG_PUSH(Fortran 77) +if test -z "$F77" || test no = "$F77"; then + _lt_disable_F77=yes +fi + +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for f77 test sources. +ac_ext=f + +# Object file extension for compiled f77 test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the F77 compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test yes != "$_lt_disable_F77"; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="\ + subroutine t + return + end +" + + # Code to be used in simple link tests + lt_simple_link_test_code="\ + program t + end +" + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC=$CC + lt_save_GCC=$GCC + lt_save_CFLAGS=$CFLAGS + CC=${F77-"f77"} + CFLAGS=$FFLAGS + compiler=$CC + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + GCC=$G77 + if test -n "$compiler"; then + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test no = "$can_build_shared" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test yes = "$enable_shared" && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + aix[[4-9]]*) + if test ia64 != "$host_cpu"; then + case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in + yes,aix,yes) ;; # shared object as lib.so file only + yes,svr4,*) ;; # shared object as lib.so archive member only + yes,*) enable_static=no ;; # shared object in lib.a archive as well + esac + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test yes = "$enable_shared" || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_TAGVAR(GCC, $1)=$G77 + _LT_TAGVAR(LD, $1)=$LD + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + GCC=$lt_save_GCC + CC=$lt_save_CC + CFLAGS=$lt_save_CFLAGS +fi # test yes != "$_lt_disable_F77" + +AC_LANG_POP +])# _LT_LANG_F77_CONFIG + + +# _LT_LANG_FC_CONFIG([TAG]) +# ------------------------- +# Ensure that the configuration variables for a Fortran compiler are +# suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to 'libtool'. +m4_defun([_LT_LANG_FC_CONFIG], +[AC_LANG_PUSH(Fortran) + +if test -z "$FC" || test no = "$FC"; then + _lt_disable_FC=yes +fi + +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for fc test sources. +ac_ext=${ac_fc_srcext-f} + +# Object file extension for compiled fc test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the FC compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test yes != "$_lt_disable_FC"; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="\ + subroutine t + return + end +" + + # Code to be used in simple link tests + lt_simple_link_test_code="\ + program t + end +" + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC=$CC + lt_save_GCC=$GCC + lt_save_CFLAGS=$CFLAGS + CC=${FC-"f95"} + CFLAGS=$FCFLAGS + compiler=$CC + GCC=$ac_cv_fc_compiler_gnu + + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + + if test -n "$compiler"; then + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test no = "$can_build_shared" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test yes = "$enable_shared" && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + aix[[4-9]]*) + if test ia64 != "$host_cpu"; then + case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in + yes,aix,yes) ;; # shared object as lib.so file only + yes,svr4,*) ;; # shared object as lib.so archive member only + yes,*) enable_static=no ;; # shared object in lib.a archive as well + esac + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test yes = "$enable_shared" || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_TAGVAR(GCC, $1)=$ac_cv_fc_compiler_gnu + _LT_TAGVAR(LD, $1)=$LD + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_SYS_HIDDEN_LIBDEPS($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + GCC=$lt_save_GCC + CC=$lt_save_CC + CFLAGS=$lt_save_CFLAGS +fi # test yes != "$_lt_disable_FC" + +AC_LANG_POP +])# _LT_LANG_FC_CONFIG + + +# _LT_LANG_GCJ_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for the GNU Java Compiler compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to 'libtool'. +m4_defun([_LT_LANG_GCJ_CONFIG], +[AC_REQUIRE([LT_PROG_GCJ])dnl +AC_LANG_SAVE + +# Source file extension for Java test sources. +ac_ext=java + +# Object file extension for compiled Java test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="class foo {}" + +# Code to be used in simple link tests +lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_CFLAGS=$CFLAGS +lt_save_GCC=$GCC +GCC=yes +CC=${GCJ-"gcj"} +CFLAGS=$GCJFLAGS +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_TAGVAR(LD, $1)=$LD +_LT_CC_BASENAME([$compiler]) + +# GCJ did not exist at the time GCC didn't implicitly link libc in. +_LT_TAGVAR(archive_cmds_need_lc, $1)=no + +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds + +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) +fi + +AC_LANG_RESTORE + +GCC=$lt_save_GCC +CC=$lt_save_CC +CFLAGS=$lt_save_CFLAGS +])# _LT_LANG_GCJ_CONFIG + + +# _LT_LANG_GO_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for the GNU Go compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to 'libtool'. +m4_defun([_LT_LANG_GO_CONFIG], +[AC_REQUIRE([LT_PROG_GO])dnl +AC_LANG_SAVE + +# Source file extension for Go test sources. +ac_ext=go + +# Object file extension for compiled Go test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="package main; func main() { }" + +# Code to be used in simple link tests +lt_simple_link_test_code='package main; func main() { }' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_CFLAGS=$CFLAGS +lt_save_GCC=$GCC +GCC=yes +CC=${GOC-"gccgo"} +CFLAGS=$GOFLAGS +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_TAGVAR(LD, $1)=$LD +_LT_CC_BASENAME([$compiler]) + +# Go did not exist at the time GCC didn't implicitly link libc in. +_LT_TAGVAR(archive_cmds_need_lc, $1)=no + +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds + +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) +fi + +AC_LANG_RESTORE + +GCC=$lt_save_GCC +CC=$lt_save_CC +CFLAGS=$lt_save_CFLAGS +])# _LT_LANG_GO_CONFIG + + +# _LT_LANG_RC_CONFIG([TAG]) +# ------------------------- +# Ensure that the configuration variables for the Windows resource compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to 'libtool'. +m4_defun([_LT_LANG_RC_CONFIG], +[AC_REQUIRE([LT_PROG_RC])dnl +AC_LANG_SAVE + +# Source file extension for RC test sources. +ac_ext=rc + +# Object file extension for compiled RC test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' + +# Code to be used in simple link tests +lt_simple_link_test_code=$lt_simple_compile_test_code + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_CFLAGS=$CFLAGS +lt_save_GCC=$GCC +GCC= +CC=${RC-"windres"} +CFLAGS= +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_CC_BASENAME([$compiler]) +_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + +if test -n "$compiler"; then + : + _LT_CONFIG($1) +fi + +GCC=$lt_save_GCC +AC_LANG_RESTORE +CC=$lt_save_CC +CFLAGS=$lt_save_CFLAGS +])# _LT_LANG_RC_CONFIG + + +# LT_PROG_GCJ +# ----------- +AC_DEFUN([LT_PROG_GCJ], +[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], + [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], + [AC_CHECK_TOOL(GCJ, gcj,) + test set = "${GCJFLAGS+set}" || GCJFLAGS="-g -O2" + AC_SUBST(GCJFLAGS)])])[]dnl +]) + +# Old name: +AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_GCJ], []) + + +# LT_PROG_GO +# ---------- +AC_DEFUN([LT_PROG_GO], +[AC_CHECK_TOOL(GOC, gccgo,) +]) + + +# LT_PROG_RC +# ---------- +AC_DEFUN([LT_PROG_RC], +[AC_CHECK_TOOL(RC, windres,) +]) + +# Old name: +AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_RC], []) + + +# _LT_DECL_EGREP +# -------------- +# If we don't have a new enough Autoconf to choose the best grep +# available, choose the one first in the user's PATH. +m4_defun([_LT_DECL_EGREP], +[AC_REQUIRE([AC_PROG_EGREP])dnl +AC_REQUIRE([AC_PROG_FGREP])dnl +test -z "$GREP" && GREP=grep +_LT_DECL([], [GREP], [1], [A grep program that handles long lines]) +_LT_DECL([], [EGREP], [1], [An ERE matcher]) +_LT_DECL([], [FGREP], [1], [A literal string matcher]) +dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too +AC_SUBST([GREP]) +]) + + +# _LT_DECL_OBJDUMP +# -------------- +# If we don't have a new enough Autoconf to choose the best objdump +# available, choose the one first in the user's PATH. +m4_defun([_LT_DECL_OBJDUMP], +[AC_CHECK_TOOL(OBJDUMP, objdump, false) +test -z "$OBJDUMP" && OBJDUMP=objdump +_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) +AC_SUBST([OBJDUMP]) +]) + +# _LT_DECL_DLLTOOL +# ---------------- +# Ensure DLLTOOL variable is set. +m4_defun([_LT_DECL_DLLTOOL], +[AC_CHECK_TOOL(DLLTOOL, dlltool, false) +test -z "$DLLTOOL" && DLLTOOL=dlltool +_LT_DECL([], [DLLTOOL], [1], [DLL creation program]) +AC_SUBST([DLLTOOL]) +]) + +# _LT_DECL_SED +# ------------ +# Check for a fully-functional sed program, that truncates +# as few characters as possible. Prefer GNU sed if found. +m4_defun([_LT_DECL_SED], +[AC_PROG_SED +test -z "$SED" && SED=sed +Xsed="$SED -e 1s/^X//" +_LT_DECL([], [SED], [1], [A sed program that does not truncate output]) +_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], + [Sed that helps us avoid accidentally triggering echo(1) options like -n]) +])# _LT_DECL_SED + +m4_ifndef([AC_PROG_SED], [ +# NOTE: This macro has been submitted for inclusion into # +# GNU Autoconf as AC_PROG_SED. When it is available in # +# a released version of Autoconf we should remove this # +# macro and use it instead. # + +m4_defun([AC_PROG_SED], +[AC_MSG_CHECKING([for a sed that does not truncate output]) +AC_CACHE_VAL(lt_cv_path_SED, +[# Loop through the user's path and test for sed and gsed. +# Then use that list of sed's as ones to test for truncation. +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for lt_ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then + lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" + fi + done + done +done +IFS=$as_save_IFS +lt_ac_max=0 +lt_ac_count=0 +# Add /usr/xpg4/bin/sed as it is typically found on Solaris +# along with /bin/sed that truncates output. +for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do + test ! -f "$lt_ac_sed" && continue + cat /dev/null > conftest.in + lt_ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >conftest.in + # Check for GNU sed and select it if it is found. + if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then + lt_cv_path_SED=$lt_ac_sed + break + fi + while true; do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo >>conftest.nl + $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break + cmp -s conftest.out conftest.nl || break + # 10000 chars as input seems more than enough + test 10 -lt "$lt_ac_count" && break + lt_ac_count=`expr $lt_ac_count + 1` + if test "$lt_ac_count" -gt "$lt_ac_max"; then + lt_ac_max=$lt_ac_count + lt_cv_path_SED=$lt_ac_sed + fi + done +done +]) +SED=$lt_cv_path_SED +AC_SUBST([SED]) +AC_MSG_RESULT([$SED]) +])#AC_PROG_SED +])#m4_ifndef + +# Old name: +AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_SED], []) + + +# _LT_CHECK_SHELL_FEATURES +# ------------------------ +# Find out whether the shell is Bourne or XSI compatible, +# or has some other useful features. +m4_defun([_LT_CHECK_SHELL_FEATURES], +[if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + lt_unset=unset +else + lt_unset=false +fi +_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl + +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + lt_SP2NL='tr \040 \012' + lt_NL2SP='tr \015\012 \040\040' + ;; + *) # EBCDIC based system + lt_SP2NL='tr \100 \n' + lt_NL2SP='tr \r\n \100\100' + ;; +esac +_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl +_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl +])# _LT_CHECK_SHELL_FEATURES + + +# _LT_PATH_CONVERSION_FUNCTIONS +# ----------------------------- +# Determine what file name conversion functions should be used by +# func_to_host_file (and, implicitly, by func_to_host_path). These are needed +# for certain cross-compile configurations and native mingw. +m4_defun([_LT_PATH_CONVERSION_FUNCTIONS], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +AC_MSG_CHECKING([how to convert $build file names to $host format]) +AC_CACHE_VAL(lt_cv_to_host_file_cmd, +[case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 + ;; + esac + ;; + *-*-cygwin* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin + ;; + esac + ;; + * ) # unhandled hosts (and "normal" native builds) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; +esac +]) +to_host_file_cmd=$lt_cv_to_host_file_cmd +AC_MSG_RESULT([$lt_cv_to_host_file_cmd]) +_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd], + [0], [convert $build file names to $host format])dnl + +AC_MSG_CHECKING([how to convert $build file names to toolchain format]) +AC_CACHE_VAL(lt_cv_to_tool_file_cmd, +[#assume ordinary cross tools, or native build. +lt_cv_to_tool_file_cmd=func_convert_file_noop +case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 + ;; + esac + ;; +esac +]) +to_tool_file_cmd=$lt_cv_to_tool_file_cmd +AC_MSG_RESULT([$lt_cv_to_tool_file_cmd]) +_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd], + [0], [convert $build files to toolchain format])dnl +])# _LT_PATH_CONVERSION_FUNCTIONS + +# Helper functions for option handling. -*- Autoconf -*- +# +# Copyright (C) 2004-2005, 2007-2009, 2011-2015 Free Software +# Foundation, Inc. +# Written by Gary V. Vaughan, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 8 ltoptions.m4 + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) + + +# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) +# ------------------------------------------ +m4_define([_LT_MANGLE_OPTION], +[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) + + +# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) +# --------------------------------------- +# Set option OPTION-NAME for macro MACRO-NAME, and if there is a +# matching handler defined, dispatch to it. Other OPTION-NAMEs are +# saved as a flag. +m4_define([_LT_SET_OPTION], +[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl +m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), + _LT_MANGLE_DEFUN([$1], [$2]), + [m4_warning([Unknown $1 option '$2'])])[]dnl +]) + + +# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) +# ------------------------------------------------------------ +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +m4_define([_LT_IF_OPTION], +[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) + + +# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) +# ------------------------------------------------------- +# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME +# are set. +m4_define([_LT_UNLESS_OPTIONS], +[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), + [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), + [m4_define([$0_found])])])[]dnl +m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 +])[]dnl +]) + + +# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) +# ---------------------------------------- +# OPTION-LIST is a space-separated list of Libtool options associated +# with MACRO-NAME. If any OPTION has a matching handler declared with +# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about +# the unknown option and exit. +m4_defun([_LT_SET_OPTIONS], +[# Set options +m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), + [_LT_SET_OPTION([$1], _LT_Option)]) + +m4_if([$1],[LT_INIT],[ + dnl + dnl Simply set some default values (i.e off) if boolean options were not + dnl specified: + _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no + ]) + _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no + ]) + dnl + dnl If no reference was made to various pairs of opposing options, then + dnl we run the default mode handler for the pair. For example, if neither + dnl 'shared' nor 'disable-shared' was passed, we enable building of shared + dnl archives by default: + _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) + _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) + _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) + _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], + [_LT_ENABLE_FAST_INSTALL]) + _LT_UNLESS_OPTIONS([LT_INIT], [aix-soname=aix aix-soname=both aix-soname=svr4], + [_LT_WITH_AIX_SONAME([aix])]) + ]) +])# _LT_SET_OPTIONS + + + +# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) +# ----------------------------------------- +m4_define([_LT_MANGLE_DEFUN], +[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) + + +# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) +# ----------------------------------------------- +m4_define([LT_OPTION_DEFINE], +[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl +])# LT_OPTION_DEFINE + + +# dlopen +# ------ +LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes +]) + +AU_DEFUN([AC_LIBTOOL_DLOPEN], +[_LT_SET_OPTION([LT_INIT], [dlopen]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the 'dlopen' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) + + +# win32-dll +# --------- +# Declare package support for building win32 dll's. +LT_OPTION_DEFINE([LT_INIT], [win32-dll], +[enable_win32_dll=yes + +case $host in +*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) + AC_CHECK_TOOL(AS, as, false) + AC_CHECK_TOOL(DLLTOOL, dlltool, false) + AC_CHECK_TOOL(OBJDUMP, objdump, false) + ;; +esac + +test -z "$AS" && AS=as +_LT_DECL([], [AS], [1], [Assembler program])dnl + +test -z "$DLLTOOL" && DLLTOOL=dlltool +_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl + +test -z "$OBJDUMP" && OBJDUMP=objdump +_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl +])# win32-dll + +AU_DEFUN([AC_LIBTOOL_WIN32_DLL], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +_LT_SET_OPTION([LT_INIT], [win32-dll]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the 'win32-dll' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) + + +# _LT_ENABLE_SHARED([DEFAULT]) +# ---------------------------- +# implement the --enable-shared flag, and supports the 'shared' and +# 'disable-shared' LT_INIT options. +# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'. +m4_define([_LT_ENABLE_SHARED], +[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([shared], + [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], + [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for pkg in $enableval; do + IFS=$lt_save_ifs + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS=$lt_save_ifs + ;; + esac], + [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) + + _LT_DECL([build_libtool_libs], [enable_shared], [0], + [Whether or not to build shared libraries]) +])# _LT_ENABLE_SHARED + +LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) + +# Old names: +AC_DEFUN([AC_ENABLE_SHARED], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) +]) + +AC_DEFUN([AC_DISABLE_SHARED], +[_LT_SET_OPTION([LT_INIT], [disable-shared]) +]) + +AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) +AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_ENABLE_SHARED], []) +dnl AC_DEFUN([AM_DISABLE_SHARED], []) + + + +# _LT_ENABLE_STATIC([DEFAULT]) +# ---------------------------- +# implement the --enable-static flag, and support the 'static' and +# 'disable-static' LT_INIT options. +# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'. +m4_define([_LT_ENABLE_STATIC], +[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([static], + [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], + [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for pkg in $enableval; do + IFS=$lt_save_ifs + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS=$lt_save_ifs + ;; + esac], + [enable_static=]_LT_ENABLE_STATIC_DEFAULT) + + _LT_DECL([build_old_libs], [enable_static], [0], + [Whether or not to build static libraries]) +])# _LT_ENABLE_STATIC + +LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) + +# Old names: +AC_DEFUN([AC_ENABLE_STATIC], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) +]) + +AC_DEFUN([AC_DISABLE_STATIC], +[_LT_SET_OPTION([LT_INIT], [disable-static]) +]) + +AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) +AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_ENABLE_STATIC], []) +dnl AC_DEFUN([AM_DISABLE_STATIC], []) + + + +# _LT_ENABLE_FAST_INSTALL([DEFAULT]) +# ---------------------------------- +# implement the --enable-fast-install flag, and support the 'fast-install' +# and 'disable-fast-install' LT_INIT options. +# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'. +m4_define([_LT_ENABLE_FAST_INSTALL], +[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([fast-install], + [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], + [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for pkg in $enableval; do + IFS=$lt_save_ifs + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS=$lt_save_ifs + ;; + esac], + [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) + +_LT_DECL([fast_install], [enable_fast_install], [0], + [Whether or not to optimize for fast installation])dnl +])# _LT_ENABLE_FAST_INSTALL + +LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) + +# Old names: +AU_DEFUN([AC_ENABLE_FAST_INSTALL], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you put +the 'fast-install' option into LT_INIT's first parameter.]) +]) + +AU_DEFUN([AC_DISABLE_FAST_INSTALL], +[_LT_SET_OPTION([LT_INIT], [disable-fast-install]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you put +the 'disable-fast-install' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) +dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) + + +# _LT_WITH_AIX_SONAME([DEFAULT]) +# ---------------------------------- +# implement the --with-aix-soname flag, and support the `aix-soname=aix' +# and `aix-soname=both' and `aix-soname=svr4' LT_INIT options. DEFAULT +# is either `aix', `both' or `svr4'. If omitted, it defaults to `aix'. +m4_define([_LT_WITH_AIX_SONAME], +[m4_define([_LT_WITH_AIX_SONAME_DEFAULT], [m4_if($1, svr4, svr4, m4_if($1, both, both, aix))])dnl +shared_archive_member_spec= +case $host,$enable_shared in +power*-*-aix[[5-9]]*,yes) + AC_MSG_CHECKING([which variant of shared library versioning to provide]) + AC_ARG_WITH([aix-soname], + [AS_HELP_STRING([--with-aix-soname=aix|svr4|both], + [shared library versioning (aka "SONAME") variant to provide on AIX, @<:@default=]_LT_WITH_AIX_SONAME_DEFAULT[@:>@.])], + [case $withval in + aix|svr4|both) + ;; + *) + AC_MSG_ERROR([Unknown argument to --with-aix-soname]) + ;; + esac + lt_cv_with_aix_soname=$with_aix_soname], + [AC_CACHE_VAL([lt_cv_with_aix_soname], + [lt_cv_with_aix_soname=]_LT_WITH_AIX_SONAME_DEFAULT) + with_aix_soname=$lt_cv_with_aix_soname]) + AC_MSG_RESULT([$with_aix_soname]) + if test aix != "$with_aix_soname"; then + # For the AIX way of multilib, we name the shared archive member + # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o', + # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File. + # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag, + # the AIX toolchain works better with OBJECT_MODE set (default 32). + if test 64 = "${OBJECT_MODE-32}"; then + shared_archive_member_spec=shr_64 + else + shared_archive_member_spec=shr + fi + fi + ;; +*) + with_aix_soname=aix + ;; +esac + +_LT_DECL([], [shared_archive_member_spec], [0], + [Shared archive member basename, for filename based shared library versioning on AIX])dnl +])# _LT_WITH_AIX_SONAME + +LT_OPTION_DEFINE([LT_INIT], [aix-soname=aix], [_LT_WITH_AIX_SONAME([aix])]) +LT_OPTION_DEFINE([LT_INIT], [aix-soname=both], [_LT_WITH_AIX_SONAME([both])]) +LT_OPTION_DEFINE([LT_INIT], [aix-soname=svr4], [_LT_WITH_AIX_SONAME([svr4])]) + + +# _LT_WITH_PIC([MODE]) +# -------------------- +# implement the --with-pic flag, and support the 'pic-only' and 'no-pic' +# LT_INIT options. +# MODE is either 'yes' or 'no'. If omitted, it defaults to 'both'. +m4_define([_LT_WITH_PIC], +[AC_ARG_WITH([pic], + [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@], + [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], + [lt_p=${PACKAGE-default} + case $withval in + yes|no) pic_mode=$withval ;; + *) + pic_mode=default + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for lt_pkg in $withval; do + IFS=$lt_save_ifs + if test "X$lt_pkg" = "X$lt_p"; then + pic_mode=yes + fi + done + IFS=$lt_save_ifs + ;; + esac], + [pic_mode=m4_default([$1], [default])]) + +_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl +])# _LT_WITH_PIC + +LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) +LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) + +# Old name: +AU_DEFUN([AC_LIBTOOL_PICMODE], +[_LT_SET_OPTION([LT_INIT], [pic-only]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the 'pic-only' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) + + +m4_define([_LTDL_MODE], []) +LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], + [m4_define([_LTDL_MODE], [nonrecursive])]) +LT_OPTION_DEFINE([LTDL_INIT], [recursive], + [m4_define([_LTDL_MODE], [recursive])]) +LT_OPTION_DEFINE([LTDL_INIT], [subproject], + [m4_define([_LTDL_MODE], [subproject])]) + +m4_define([_LTDL_TYPE], []) +LT_OPTION_DEFINE([LTDL_INIT], [installable], + [m4_define([_LTDL_TYPE], [installable])]) +LT_OPTION_DEFINE([LTDL_INIT], [convenience], + [m4_define([_LTDL_TYPE], [convenience])]) + +# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- +# +# Copyright (C) 2004-2005, 2007-2008, 2011-2015 Free Software +# Foundation, Inc. +# Written by Gary V. Vaughan, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 6 ltsugar.m4 + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) + + +# lt_join(SEP, ARG1, [ARG2...]) +# ----------------------------- +# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their +# associated separator. +# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier +# versions in m4sugar had bugs. +m4_define([lt_join], +[m4_if([$#], [1], [], + [$#], [2], [[$2]], + [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) +m4_define([_lt_join], +[m4_if([$#$2], [2], [], + [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) + + +# lt_car(LIST) +# lt_cdr(LIST) +# ------------ +# Manipulate m4 lists. +# These macros are necessary as long as will still need to support +# Autoconf-2.59, which quotes differently. +m4_define([lt_car], [[$1]]) +m4_define([lt_cdr], +[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], + [$#], 1, [], + [m4_dquote(m4_shift($@))])]) +m4_define([lt_unquote], $1) + + +# lt_append(MACRO-NAME, STRING, [SEPARATOR]) +# ------------------------------------------ +# Redefine MACRO-NAME to hold its former content plus 'SEPARATOR''STRING'. +# Note that neither SEPARATOR nor STRING are expanded; they are appended +# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). +# No SEPARATOR is output if MACRO-NAME was previously undefined (different +# than defined and empty). +# +# This macro is needed until we can rely on Autoconf 2.62, since earlier +# versions of m4sugar mistakenly expanded SEPARATOR but not STRING. +m4_define([lt_append], +[m4_define([$1], + m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) + + + +# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) +# ---------------------------------------------------------- +# Produce a SEP delimited list of all paired combinations of elements of +# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list +# has the form PREFIXmINFIXSUFFIXn. +# Needed until we can rely on m4_combine added in Autoconf 2.62. +m4_define([lt_combine], +[m4_if(m4_eval([$# > 3]), [1], + [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl +[[m4_foreach([_Lt_prefix], [$2], + [m4_foreach([_Lt_suffix], + ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, + [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) + + +# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) +# ----------------------------------------------------------------------- +# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited +# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. +m4_define([lt_if_append_uniq], +[m4_ifdef([$1], + [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], + [lt_append([$1], [$2], [$3])$4], + [$5])], + [lt_append([$1], [$2], [$3])$4])]) + + +# lt_dict_add(DICT, KEY, VALUE) +# ----------------------------- +m4_define([lt_dict_add], +[m4_define([$1($2)], [$3])]) + + +# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) +# -------------------------------------------- +m4_define([lt_dict_add_subkey], +[m4_define([$1($2:$3)], [$4])]) + + +# lt_dict_fetch(DICT, KEY, [SUBKEY]) +# ---------------------------------- +m4_define([lt_dict_fetch], +[m4_ifval([$3], + m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), + m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) + + +# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) +# ----------------------------------------------------------------- +m4_define([lt_if_dict_fetch], +[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], + [$5], + [$6])]) + + +# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) +# -------------------------------------------------------------- +m4_define([lt_dict_filter], +[m4_if([$5], [], [], + [lt_join(m4_quote(m4_default([$4], [[, ]])), + lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), + [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl +]) + +# ltversion.m4 -- version numbers -*- Autoconf -*- +# +# Copyright (C) 2004, 2011-2015 Free Software Foundation, Inc. +# Written by Scott James Remnant, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# @configure_input@ + +# serial 4179 ltversion.m4 +# This file is part of GNU Libtool + +m4_define([LT_PACKAGE_VERSION], [2.4.6]) +m4_define([LT_PACKAGE_REVISION], [2.4.6]) + +AC_DEFUN([LTVERSION_VERSION], +[macro_version='2.4.6' +macro_revision='2.4.6' +_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) +_LT_DECL(, macro_revision, 0) +]) + +# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- +# +# Copyright (C) 2004-2005, 2007, 2009, 2011-2015 Free Software +# Foundation, Inc. +# Written by Scott James Remnant, 2004. +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 5 lt~obsolete.m4 + +# These exist entirely to fool aclocal when bootstrapping libtool. +# +# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN), +# which have later been changed to m4_define as they aren't part of the +# exported API, or moved to Autoconf or Automake where they belong. +# +# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN +# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us +# using a macro with the same name in our local m4/libtool.m4 it'll +# pull the old libtool.m4 in (it doesn't see our shiny new m4_define +# and doesn't know about Autoconf macros at all.) +# +# So we provide this file, which has a silly filename so it's always +# included after everything else. This provides aclocal with the +# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything +# because those macros already exist, or will be overwritten later. +# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. +# +# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. +# Yes, that means every name once taken will need to remain here until +# we give up compatibility with versions before 1.7, at which point +# we need to keep only those names which we still refer to. + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) + +m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) +m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) +m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) +m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) +m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) +m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) +m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) +m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) +m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) +m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) +m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) +m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) +m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) +m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) +m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) +m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) +m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) +m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) +m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) +m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) +m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) +m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) +m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) +m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) +m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) +m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) +m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) +m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) +m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) +m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) +m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) +m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) +m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) +m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) +m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) +m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) +m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) +m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) +m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) +m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) +m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) +m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) +m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) +m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) +m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) +m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) +m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) +m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) +m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) +m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) +m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])]) +m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])]) +m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])]) +m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])]) +m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])]) +m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])]) +m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])]) + +# Copyright (C) 2002-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_AUTOMAKE_VERSION(VERSION) +# ---------------------------- +# Automake X.Y traces this macro to ensure aclocal.m4 has been +# generated from the m4 files accompanying Automake X.Y. +# (This private macro should not be called outside this file.) +AC_DEFUN([AM_AUTOMAKE_VERSION], +[am__api_version='1.15' +dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to +dnl require some minimum version. Point them to the right macro. +m4_if([$1], [1.15], [], + [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl +]) + +# _AM_AUTOCONF_VERSION(VERSION) +# ----------------------------- +# aclocal traces this macro to find the Autoconf version. +# This is a private macro too. Using m4_define simplifies +# the logic in aclocal, which can simply ignore this definition. +m4_define([_AM_AUTOCONF_VERSION], []) + +# AM_SET_CURRENT_AUTOMAKE_VERSION +# ------------------------------- +# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. +# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], +[AM_AUTOMAKE_VERSION([1.15])dnl +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) + +# Copyright (C) 2011-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_AR([ACT-IF-FAIL]) +# ------------------------- +# Try to determine the archiver interface, and trigger the ar-lib wrapper +# if it is needed. If the detection of archiver interface fails, run +# ACT-IF-FAIL (default is to abort configure with a proper error message). +AC_DEFUN([AM_PROG_AR], +[AC_BEFORE([$0], [LT_INIT])dnl +AC_BEFORE([$0], [AC_PROG_LIBTOOL])dnl +AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([ar-lib])dnl +AC_CHECK_TOOLS([AR], [ar lib "link -lib"], [false]) +: ${AR=ar} + +AC_CACHE_CHECK([the archiver ($AR) interface], [am_cv_ar_interface], + [AC_LANG_PUSH([C]) + am_cv_ar_interface=ar + AC_COMPILE_IFELSE([AC_LANG_SOURCE([[int some_variable = 0;]])], + [am_ar_try='$AR cru libconftest.a conftest.$ac_objext >&AS_MESSAGE_LOG_FD' + AC_TRY_EVAL([am_ar_try]) + if test "$ac_status" -eq 0; then + am_cv_ar_interface=ar + else + am_ar_try='$AR -NOLOGO -OUT:conftest.lib conftest.$ac_objext >&AS_MESSAGE_LOG_FD' + AC_TRY_EVAL([am_ar_try]) + if test "$ac_status" -eq 0; then + am_cv_ar_interface=lib + else + am_cv_ar_interface=unknown + fi + fi + rm -f conftest.lib libconftest.a + ]) + AC_LANG_POP([C])]) + +case $am_cv_ar_interface in +ar) + ;; +lib) + # Microsoft lib, so override with the ar-lib wrapper script. + # FIXME: It is wrong to rewrite AR. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__AR in this case, + # and then we could set am__AR="$am_aux_dir/ar-lib \$(AR)" or something + # similar. + AR="$am_aux_dir/ar-lib $AR" + ;; +unknown) + m4_default([$1], + [AC_MSG_ERROR([could not determine $AR interface])]) + ;; +esac +AC_SUBST([AR])dnl +]) + +# AM_AUX_DIR_EXPAND -*- Autoconf -*- + +# Copyright (C) 2001-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to +# '$srcdir', '$srcdir/..', or '$srcdir/../..'. +# +# Of course, Automake must honor this variable whenever it calls a +# tool from the auxiliary directory. The problem is that $srcdir (and +# therefore $ac_aux_dir as well) can be either absolute or relative, +# depending on how configure is run. This is pretty annoying, since +# it makes $ac_aux_dir quite unusable in subdirectories: in the top +# source directory, any form will work fine, but in subdirectories a +# relative path needs to be adjusted first. +# +# $ac_aux_dir/missing +# fails when called from a subdirectory if $ac_aux_dir is relative +# $top_srcdir/$ac_aux_dir/missing +# fails if $ac_aux_dir is absolute, +# fails when called from a subdirectory in a VPATH build with +# a relative $ac_aux_dir +# +# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +# are both prefixed by $srcdir. In an in-source build this is usually +# harmless because $srcdir is '.', but things will broke when you +# start a VPATH build or use an absolute $srcdir. +# +# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` +# and then we would define $MISSING as +# MISSING="\${SHELL} $am_aux_dir/missing" +# This will work as long as MISSING is not called from configure, because +# unfortunately $(top_srcdir) has no meaning in configure. +# However there are other variables, like CC, which are often used in +# configure, and could therefore not use this "fixed" $ac_aux_dir. +# +# Another solution, used here, is to always expand $ac_aux_dir to an +# absolute PATH. The drawback is that using absolute paths prevent a +# configured tree to be moved without reconfiguration. + +AC_DEFUN([AM_AUX_DIR_EXPAND], +[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl +# Expand $ac_aux_dir to an absolute path. +am_aux_dir=`cd "$ac_aux_dir" && pwd` +]) + +# AM_CONDITIONAL -*- Autoconf -*- + +# Copyright (C) 1997-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_CONDITIONAL(NAME, SHELL-CONDITION) +# ------------------------------------- +# Define a conditional. +AC_DEFUN([AM_CONDITIONAL], +[AC_PREREQ([2.52])dnl + m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_SUBST([$1_TRUE])dnl +AC_SUBST([$1_FALSE])dnl +_AM_SUBST_NOTMAKE([$1_TRUE])dnl +_AM_SUBST_NOTMAKE([$1_FALSE])dnl +m4_define([_AM_COND_VALUE_$1], [$2])dnl +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi +AC_CONFIG_COMMANDS_PRE( +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) +fi])]) + +# Copyright (C) 1999-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + + +# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be +# written in clear, in which case automake, when reading aclocal.m4, +# will think it sees a *use*, and therefore will trigger all it's +# C support machinery. Also note that it means that autoscan, seeing +# CC etc. in the Makefile, will ask for an AC_PROG_CC use... + + +# _AM_DEPENDENCIES(NAME) +# ---------------------- +# See how the compiler implements dependency checking. +# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC". +# We try a few techniques and use that to set a single cache variable. +# +# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was +# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular +# dependency, and given that the user is not expected to run this macro, +# just rely on AC_PROG_CC. +AC_DEFUN([_AM_DEPENDENCIES], +[AC_REQUIRE([AM_SET_DEPDIR])dnl +AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl +AC_REQUIRE([AM_MAKE_INCLUDE])dnl +AC_REQUIRE([AM_DEP_TRACK])dnl + +m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], + [$1], [CXX], [depcc="$CXX" am_compiler_list=], + [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], + [$1], [UPC], [depcc="$UPC" am_compiler_list=], + [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) + +AC_CACHE_CHECK([dependency style of $depcc], + [am_cv_$1_dependencies_compiler_type], +[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_$1_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` + fi + am__universal=false + m4_case([$1], [CC], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac], + [CXX], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac]) + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_$1_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_$1_dependencies_compiler_type=none +fi +]) +AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) +AM_CONDITIONAL([am__fastdep$1], [ + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) +]) + + +# AM_SET_DEPDIR +# ------------- +# Choose a directory name for dependency files. +# This macro is AC_REQUIREd in _AM_DEPENDENCIES. +AC_DEFUN([AM_SET_DEPDIR], +[AC_REQUIRE([AM_SET_LEADING_DOT])dnl +AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl +]) + + +# AM_DEP_TRACK +# ------------ +AC_DEFUN([AM_DEP_TRACK], +[AC_ARG_ENABLE([dependency-tracking], [dnl +AS_HELP_STRING( + [--enable-dependency-tracking], + [do not reject slow dependency extractors]) +AS_HELP_STRING( + [--disable-dependency-tracking], + [speeds up one-time build])]) +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + am__nodep='_no' +fi +AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +AC_SUBST([AMDEPBACKSLASH])dnl +_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl +AC_SUBST([am__nodep])dnl +_AM_SUBST_NOTMAKE([am__nodep])dnl +]) + +# Generate code to set up dependency tracking. -*- Autoconf -*- + +# Copyright (C) 1999-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + + +# _AM_OUTPUT_DEPENDENCY_COMMANDS +# ------------------------------ +AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], +[{ + # Older Autoconf quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named 'Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running 'make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "$am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} +])# _AM_OUTPUT_DEPENDENCY_COMMANDS + + +# AM_OUTPUT_DEPENDENCY_COMMANDS +# ----------------------------- +# This macro should only be invoked once -- use via AC_REQUIRE. +# +# This code is only required when automatic dependency tracking +# is enabled. FIXME. This creates each '.P' file that we will +# need in order to bootstrap the dependency handling code. +AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], +[AC_CONFIG_COMMANDS([depfiles], + [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], + [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) +]) + +# Do all the work for Automake. -*- Autoconf -*- + +# Copyright (C) 1996-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This macro actually does too much. Some checks are only needed if +# your package does certain things. But this isn't really a big deal. + +dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O. +m4_define([AC_PROG_CC], +m4_defn([AC_PROG_CC]) +[_AM_PROG_CC_C_O +]) + +# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) +# AM_INIT_AUTOMAKE([OPTIONS]) +# ----------------------------------------------- +# The call with PACKAGE and VERSION arguments is the old style +# call (pre autoconf-2.50), which is being phased out. PACKAGE +# and VERSION should now be passed to AC_INIT and removed from +# the call to AM_INIT_AUTOMAKE. +# We support both call styles for the transition. After +# the next Automake release, Autoconf can make the AC_INIT +# arguments mandatory, and then we can depend on a new Autoconf +# release and drop the old call support. +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_PREREQ([2.65])dnl +dnl Autoconf wants to disallow AM_ names. We explicitly allow +dnl the ones we care about. +m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +AC_REQUIRE([AC_PROG_INSTALL])dnl +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi +AC_SUBST([CYGPATH_W]) + +# Define the identity of the package. +dnl Distinguish between old-style and new-style calls. +m4_ifval([$2], +[AC_DIAGNOSE([obsolete], + [$0: two- and three-arguments forms are deprecated.]) +m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], +[_AM_SET_OPTIONS([$1])dnl +dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. +m4_if( + m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), + [ok:ok],, + [m4_fatal([AC_INIT should be called with package and version arguments])])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +_AM_IF_OPTION([no-define],, +[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) + AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl + +# Some tools Automake needs. +AC_REQUIRE([AM_SANITY_CHECK])dnl +AC_REQUIRE([AC_ARG_PROGRAM])dnl +AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) +AM_MISSING_PROG([AUTOCONF], [autoconf]) +AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) +AM_MISSING_PROG([AUTOHEADER], [autoheader]) +AM_MISSING_PROG([MAKEINFO], [makeinfo]) +AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl +AC_REQUIRE([AC_PROG_MKDIR_P])dnl +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# +# +AC_SUBST([mkdir_p], ['$(MKDIR_P)']) +# We need awk for the "check" target (and possibly the TAP driver). The +# system "awk" is bad on some platforms. +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_SET_LEADING_DOT])dnl +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) +_AM_IF_OPTION([no-dependencies],, +[AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES([CC])], + [m4_define([AC_PROG_CC], + m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES([CXX])], + [m4_define([AC_PROG_CXX], + m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJC], + [_AM_DEPENDENCIES([OBJC])], + [m4_define([AC_PROG_OBJC], + m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], + [_AM_DEPENDENCIES([OBJCXX])], + [m4_define([AC_PROG_OBJCXX], + m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl +]) +AC_REQUIRE([AM_SILENT_RULES])dnl +dnl The testsuite driver may need to know about EXEEXT, so add the +dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This +dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. +AC_CONFIG_COMMANDS_PRE(dnl +[m4_provide_if([_AM_COMPILER_EXEEXT], + [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl + +# POSIX will say in a future version that running "rm -f" with no argument +# is OK; and we want to be able to make that assumption in our Makefile +# recipes. So use an aggressive probe to check that the usage we want is +# actually supported "in the wild" to an acceptable degree. +# See automake bug#10828. +# To make any issue more visible, cause the running configure to be aborted +# by default if the 'rm' program in use doesn't match our expectations; the +# user can still override this though. +if rm -f && rm -fr && rm -rf; then : OK; else + cat >&2 <<'END' +Oops! + +Your 'rm' program seems unable to run without file operands specified +on the command line, even when the '-f' option is present. This is contrary +to the behaviour of most rm programs out there, and not conforming with +the upcoming POSIX standard: + +Please tell bug-automake@gnu.org about your system, including the value +of your $PATH and any error possibly output before this message. This +can help us improve future automake versions. + +END + if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then + echo 'Configuration will proceed anyway, since you have set the' >&2 + echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 + echo >&2 + else + cat >&2 <<'END' +Aborting the configuration process, to ensure you take notice of the issue. + +You can download and install GNU coreutils to get an 'rm' implementation +that behaves properly: . + +If you want to complete the configuration process using your problematic +'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM +to "yes", and re-run configure. + +END + AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) + fi +fi +dnl The trailing newline in this macro's definition is deliberate, for +dnl backward compatibility and to allow trailing 'dnl'-style comments +dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841. +]) + +dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not +dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further +dnl mangled by Autoconf and run in a shell conditional statement. +m4_define([_AC_COMPILER_EXEEXT], +m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) + +# When config.status generates a header, we must update the stamp-h file. +# This file resides in the same directory as the config header +# that is generated. The stamp files are numbered to have different names. + +# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +# loop where config.status creates the headers, so we can generate +# our stamp files there. +AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +[# Compute $1's index in $config_headers. +_am_arg=$1 +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) + +# Copyright (C) 2001-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_SH +# ------------------ +# Define $install_sh. +AC_DEFUN([AM_PROG_INSTALL_SH], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +if test x"${install_sh+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi +AC_SUBST([install_sh])]) + +# Copyright (C) 2003-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# Check whether the underlying file-system supports filenames +# with a leading dot. For instance MS-DOS doesn't. +AC_DEFUN([AM_SET_LEADING_DOT], +[rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null +AC_SUBST([am__leading_dot])]) + +# Add --enable-maintainer-mode option to configure. -*- Autoconf -*- +# From Jim Meyering + +# Copyright (C) 1996-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_MAINTAINER_MODE([DEFAULT-MODE]) +# ---------------------------------- +# Control maintainer-specific portions of Makefiles. +# Default is to disable them, unless 'enable' is passed literally. +# For symmetry, 'disable' may be passed as well. Anyway, the user +# can override the default with the --enable/--disable switch. +AC_DEFUN([AM_MAINTAINER_MODE], +[m4_case(m4_default([$1], [disable]), + [enable], [m4_define([am_maintainer_other], [disable])], + [disable], [m4_define([am_maintainer_other], [enable])], + [m4_define([am_maintainer_other], [enable]) + m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])]) +AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) + dnl maintainer-mode's default is 'disable' unless 'enable' is passed + AC_ARG_ENABLE([maintainer-mode], + [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode], + am_maintainer_other[ make rules and dependencies not useful + (and sometimes confusing) to the casual installer])], + [USE_MAINTAINER_MODE=$enableval], + [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes])) + AC_MSG_RESULT([$USE_MAINTAINER_MODE]) + AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes]) + MAINT=$MAINTAINER_MODE_TRUE + AC_SUBST([MAINT])dnl +] +) + +# Check to see how 'make' treats includes. -*- Autoconf -*- + +# Copyright (C) 2001-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_MAKE_INCLUDE() +# ----------------- +# Check to see how make treats includes. +AC_DEFUN([AM_MAKE_INCLUDE], +[am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +AC_MSG_CHECKING([for style of include used by $am_make]) +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from 'make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi +AC_SUBST([am__include]) +AC_SUBST([am__quote]) +AC_MSG_RESULT([$_am_result]) +rm -f confinc confmf +]) + +# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + +# Copyright (C) 1997-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_MISSING_PROG(NAME, PROGRAM) +# ------------------------------ +AC_DEFUN([AM_MISSING_PROG], +[AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) + +# AM_MISSING_HAS_RUN +# ------------------ +# Define MISSING if not defined so far and test if it is modern enough. +# If it is, set am_missing_run to use it, otherwise, to nothing. +AC_DEFUN([AM_MISSING_HAS_RUN], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([missing])dnl +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --is-lightweight"; then + am_missing_run="$MISSING " +else + am_missing_run= + AC_MSG_WARN(['missing' script is too old or missing]) +fi +]) + +# Helper functions for option handling. -*- Autoconf -*- + +# Copyright (C) 2001-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_MANGLE_OPTION(NAME) +# ----------------------- +AC_DEFUN([_AM_MANGLE_OPTION], +[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) + +# _AM_SET_OPTION(NAME) +# -------------------- +# Set option NAME. Presently that only means defining a flag for this option. +AC_DEFUN([_AM_SET_OPTION], +[m4_define(_AM_MANGLE_OPTION([$1]), [1])]) + +# _AM_SET_OPTIONS(OPTIONS) +# ------------------------ +# OPTIONS is a space-separated list of Automake options. +AC_DEFUN([_AM_SET_OPTIONS], +[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) + +# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) +# ------------------------------------------- +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +AC_DEFUN([_AM_IF_OPTION], +[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +# Copyright (C) 1999-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_PROG_CC_C_O +# --------------- +# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC +# to automatically call this. +AC_DEFUN([_AM_PROG_CC_C_O], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([compile])dnl +AC_LANG_PUSH([C])dnl +AC_CACHE_CHECK( + [whether $CC understands -c and -o together], + [am_cv_prog_cc_c_o], + [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])]) + # Make sure it works both with $CC and with simple cc. + # Following AC_PROG_CC_C_O, we do the test twice because some + # compilers refuse to overwrite an existing .o file with -o, + # though they will create one. + am_cv_prog_cc_c_o=yes + for am_i in 1 2; do + if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \ + && test -f conftest2.$ac_objext; then + : OK + else + am_cv_prog_cc_c_o=no + break + fi + done + rm -f core conftest* + unset am_i]) +if test "$am_cv_prog_cc_c_o" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi +AC_LANG_POP([C])]) + +# For backward compatibility. +AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) + +# Copyright (C) 2001-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_RUN_LOG(COMMAND) +# ------------------- +# Run COMMAND, save the exit status in ac_status, and log it. +# (This has been adapted from Autoconf's _AC_RUN_LOG macro.) +AC_DEFUN([AM_RUN_LOG], +[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD + ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + (exit $ac_status); }]) + +# Check to make sure that the build environment is sane. -*- Autoconf -*- + +# Copyright (C) 1996-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_SANITY_CHECK +# --------------- +AC_DEFUN([AM_SANITY_CHECK], +[AC_MSG_CHECKING([whether build environment is sane]) +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[[\\\"\#\$\&\'\`$am_lf]]*) + AC_MSG_ERROR([unsafe absolute working directory name]);; +esac +case $srcdir in + *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) + AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; +esac + +# Do 'set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + am_has_slept=no + for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken + alias in your environment]) + fi + if test "$[2]" = conftest.file || test $am_try -eq 2; then + break + fi + # Just in case. + sleep 1 + am_has_slept=yes + done + test "$[2]" = conftest.file + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +AC_MSG_RESULT([yes]) +# If we didn't sleep, we still need to ensure time stamps of config.status and +# generated files are strictly newer. +am_sleep_pid= +if grep 'slept: no' conftest.file >/dev/null 2>&1; then + ( sleep 1 ) & + am_sleep_pid=$! +fi +AC_CONFIG_COMMANDS_PRE( + [AC_MSG_CHECKING([that generated files are newer than configure]) + if test -n "$am_sleep_pid"; then + # Hide warnings about reused PIDs. + wait $am_sleep_pid 2>/dev/null + fi + AC_MSG_RESULT([done])]) +rm -f conftest.file +]) + +# Copyright (C) 2009-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_SILENT_RULES([DEFAULT]) +# -------------------------- +# Enable less verbose build rules; with the default set to DEFAULT +# ("yes" being less verbose, "no" or empty being verbose). +AC_DEFUN([AM_SILENT_RULES], +[AC_ARG_ENABLE([silent-rules], [dnl +AS_HELP_STRING( + [--enable-silent-rules], + [less verbose build output (undo: "make V=1")]) +AS_HELP_STRING( + [--disable-silent-rules], + [verbose build output (undo: "make V=0")])dnl +]) +case $enable_silent_rules in @%:@ ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; +esac +dnl +dnl A few 'make' implementations (e.g., NonStop OS and NextStep) +dnl do not support nested variable expansions. +dnl See automake bug#9928 and bug#10237. +am_make=${MAKE-make} +AC_CACHE_CHECK([whether $am_make supports nested variables], + [am_cv_make_support_nested_variables], + [if AS_ECHO([['TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi]) +if test $am_cv_make_support_nested_variables = yes; then + dnl Using '$V' instead of '$(V)' breaks IRIX make. + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AC_SUBST([AM_V])dnl +AM_SUBST_NOTMAKE([AM_V])dnl +AC_SUBST([AM_DEFAULT_V])dnl +AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl +AC_SUBST([AM_DEFAULT_VERBOSITY])dnl +AM_BACKSLASH='\' +AC_SUBST([AM_BACKSLASH])dnl +_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl +]) + +# Copyright (C) 2001-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_STRIP +# --------------------- +# One issue with vendor 'install' (even GNU) is that you can't +# specify the program used to strip binaries. This is especially +# annoying in cross-compiling environments, where the build's strip +# is unlikely to handle the host's binaries. +# Fortunately install-sh will honor a STRIPPROG variable, so we +# always use install-sh in "make install-strip", and initialize +# STRIPPROG with the value of the STRIP variable (set by the user). +AC_DEFUN([AM_PROG_INSTALL_STRIP], +[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the 'STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. +if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" +AC_SUBST([INSTALL_STRIP_PROGRAM])]) + +# Copyright (C) 2006-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_SUBST_NOTMAKE(VARIABLE) +# --------------------------- +# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. +# This macro is traced by Automake. +AC_DEFUN([_AM_SUBST_NOTMAKE]) + +# AM_SUBST_NOTMAKE(VARIABLE) +# -------------------------- +# Public sister of _AM_SUBST_NOTMAKE. +AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) + +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of 'v7', 'ustar', or 'pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +# +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AC_SUBST([AMTAR], ['$${TAR-tar}']) + +# We'll loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' + +m4_if([$1], [v7], + [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], + + [m4_case([$1], + [ustar], + [# The POSIX 1988 'ustar' format is defined with fixed-size fields. + # There is notably a 21 bits limit for the UID and the GID. In fact, + # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 + # and bug#13588). + am_max_uid=2097151 # 2^21 - 1 + am_max_gid=$am_max_uid + # The $UID and $GID variables are not portable, so we need to resort + # to the POSIX-mandated id(1) utility. Errors in the 'id' calls + # below are definitely unexpected, so allow the users to see them + # (that is, avoid stderr redirection). + am_uid=`id -u || echo unknown` + am_gid=`id -g || echo unknown` + AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) + if test $am_uid -le $am_max_uid; then + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + _am_tools=none + fi + AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) + if test $am_gid -le $am_max_gid; then + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + _am_tools=none + fi], + + [pax], + [], + + [m4_fatal([Unknown tar format])]) + + AC_MSG_CHECKING([how to create a $1 tar archive]) + + # Go ahead even if we have the value already cached. We do so because we + # need to set the values for the 'am__tar' and 'am__untar' variables. + _am_tools=${am_cv_prog_tar_$1-$_am_tools} + + for _am_tool in $_am_tools; do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works. + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi + done + rm -rf conftest.dir + + AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) + AC_MSG_RESULT([$am_cv_prog_tar_$1])]) + +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR + diff --git a/compat/libjpeg/ar-lib b/compat/libjpeg/ar-lib new file mode 100755 index 0000000..463b9ec --- /dev/null +++ b/compat/libjpeg/ar-lib @@ -0,0 +1,270 @@ +#! /bin/sh +# Wrapper for Microsoft lib.exe + +me=ar-lib +scriptversion=2012-03-01.08; # UTC + +# Copyright (C) 2010-2014 Free Software Foundation, Inc. +# Written by Peter Rosin . +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to or send patches to +# . + + +# func_error message +func_error () +{ + echo "$me: $1" 1>&2 + exit 1 +} + +file_conv= + +# func_file_conv build_file +# Convert a $build file to $host form and store it in $file +# Currently only supports Windows hosts. +func_file_conv () +{ + file=$1 + case $file in + / | /[!/]*) # absolute file, and not a UNC file + if test -z "$file_conv"; then + # lazily determine how to convert abs files + case `uname -s` in + MINGW*) + file_conv=mingw + ;; + CYGWIN*) + file_conv=cygwin + ;; + *) + file_conv=wine + ;; + esac + fi + case $file_conv in + mingw) + file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` + ;; + cygwin) + file=`cygpath -m "$file" || echo "$file"` + ;; + wine) + file=`winepath -w "$file" || echo "$file"` + ;; + esac + ;; + esac +} + +# func_at_file at_file operation archive +# Iterate over all members in AT_FILE performing OPERATION on ARCHIVE +# for each of them. +# When interpreting the content of the @FILE, do NOT use func_file_conv, +# since the user would need to supply preconverted file names to +# binutils ar, at least for MinGW. +func_at_file () +{ + operation=$2 + archive=$3 + at_file_contents=`cat "$1"` + eval set x "$at_file_contents" + shift + + for member + do + $AR -NOLOGO $operation:"$member" "$archive" || exit $? + done +} + +case $1 in + '') + func_error "no command. Try '$0 --help' for more information." + ;; + -h | --h*) + cat < /* to declare isupper(), tolower() */ +#ifdef NEED_SIGNAL_CATCHER +#include /* to declare signal() */ +#endif +#ifdef USE_SETMODE +#include /* to declare setmode()'s parameter macros */ +/* If you have setmode() but not , just delete this line: */ +#include /* to declare setmode() */ +#endif + + +/* + * Signal catcher to ensure that temporary files are removed before aborting. + * NB: for Amiga Manx C this is actually a global routine named _abort(); + * we put "#define signal_catcher _abort" in jconfig.h. Talk about bogus... + */ + +#ifdef NEED_SIGNAL_CATCHER + +static j_common_ptr sig_cinfo; + +void /* must be global for Manx C */ +signal_catcher (int signum) +{ + if (sig_cinfo != NULL) { + if (sig_cinfo->err != NULL) /* turn off trace output */ + sig_cinfo->err->trace_level = 0; + jpeg_destroy(sig_cinfo); /* clean up memory allocation & temp files */ + } + exit(EXIT_FAILURE); +} + + +GLOBAL(void) +enable_signal_catcher (j_common_ptr cinfo) +{ + sig_cinfo = cinfo; +#ifdef SIGINT /* not all systems have SIGINT */ + signal(SIGINT, signal_catcher); +#endif +#ifdef SIGTERM /* not all systems have SIGTERM */ + signal(SIGTERM, signal_catcher); +#endif +} + +#endif + + +/* + * Optional progress monitor: display a percent-done figure on stderr. + */ + +#ifdef PROGRESS_REPORT + +METHODDEF(void) +progress_monitor (j_common_ptr cinfo) +{ + cd_progress_ptr prog = (cd_progress_ptr) cinfo->progress; + int total_passes = prog->pub.total_passes + prog->total_extra_passes; + int percent_done = (int) (prog->pub.pass_counter*100L/prog->pub.pass_limit); + + if (percent_done != prog->percent_done) { + prog->percent_done = percent_done; + if (total_passes > 1) { + fprintf(stderr, "\rPass %d/%d: %3d%% ", + prog->pub.completed_passes + prog->completed_extra_passes + 1, + total_passes, percent_done); + } else { + fprintf(stderr, "\r %3d%% ", percent_done); + } + fflush(stderr); + } +} + + +GLOBAL(void) +start_progress_monitor (j_common_ptr cinfo, cd_progress_ptr progress) +{ + /* Enable progress display, unless trace output is on */ + if (cinfo->err->trace_level == 0) { + progress->pub.progress_monitor = progress_monitor; + progress->completed_extra_passes = 0; + progress->total_extra_passes = 0; + progress->percent_done = -1; + cinfo->progress = &progress->pub; + } +} + + +GLOBAL(void) +end_progress_monitor (j_common_ptr cinfo) +{ + /* Clear away progress display */ + if (cinfo->err->trace_level == 0) { + fprintf(stderr, "\r \r"); + fflush(stderr); + } +} + +#endif + + +/* + * Case-insensitive matching of possibly-abbreviated keyword switches. + * keyword is the constant keyword (must be lower case already), + * minchars is length of minimum legal abbreviation. + */ + +GLOBAL(boolean) +keymatch (char * arg, const char * keyword, int minchars) +{ + register int ca, ck; + register int nmatched = 0; + + while ((ca = *arg++) != '\0') { + if ((ck = *keyword++) == '\0') + return FALSE; /* arg longer than keyword, no good */ + if (isupper(ca)) /* force arg to lcase (assume ck is already) */ + ca = tolower(ca); + if (ca != ck) + return FALSE; /* no good */ + nmatched++; /* count matched characters */ + } + /* reached end of argument; fail if it's too short for unique abbrev */ + if (nmatched < minchars) + return FALSE; + return TRUE; /* A-OK */ +} + + +/* + * Routines to establish binary I/O mode for stdin and stdout. + * Non-Unix systems often require some hacking to get out of text mode. + */ + +GLOBAL(FILE *) +read_stdin (void) +{ + FILE * input_file = stdin; + +#ifdef USE_SETMODE /* need to hack file mode? */ + setmode(fileno(stdin), O_BINARY); +#endif +#ifdef USE_FDOPEN /* need to re-open in binary mode? */ + if ((input_file = fdopen(fileno(stdin), READ_BINARY)) == NULL) { + fprintf(stderr, "Cannot reopen stdin\n"); + exit(EXIT_FAILURE); + } +#endif + return input_file; +} + + +GLOBAL(FILE *) +write_stdout (void) +{ + FILE * output_file = stdout; + +#ifdef USE_SETMODE /* need to hack file mode? */ + setmode(fileno(stdout), O_BINARY); +#endif +#ifdef USE_FDOPEN /* need to re-open in binary mode? */ + if ((output_file = fdopen(fileno(stdout), WRITE_BINARY)) == NULL) { + fprintf(stderr, "Cannot reopen stdout\n"); + exit(EXIT_FAILURE); + } +#endif + return output_file; +} diff --git a/compat/libjpeg/cdjpeg.h b/compat/libjpeg/cdjpeg.h new file mode 100755 index 0000000..c0d064c --- /dev/null +++ b/compat/libjpeg/cdjpeg.h @@ -0,0 +1,187 @@ +/* + * cdjpeg.h + * + * Copyright (C) 1994-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains common declarations for the sample applications + * cjpeg and djpeg. It is NOT used by the core JPEG library. + */ + +#define JPEG_CJPEG_DJPEG /* define proper options in jconfig.h */ +#define JPEG_INTERNAL_OPTIONS /* cjpeg.c,djpeg.c need to see xxx_SUPPORTED */ +#include "jinclude.h" +#include "jpeglib.h" +#include "jerror.h" /* get library error codes too */ +#include "cderror.h" /* get application-specific error codes */ + + +/* + * Object interface for cjpeg's source file decoding modules + */ + +typedef struct cjpeg_source_struct * cjpeg_source_ptr; + +struct cjpeg_source_struct { + JMETHOD(void, start_input, (j_compress_ptr cinfo, + cjpeg_source_ptr sinfo)); + JMETHOD(JDIMENSION, get_pixel_rows, (j_compress_ptr cinfo, + cjpeg_source_ptr sinfo)); + JMETHOD(void, finish_input, (j_compress_ptr cinfo, + cjpeg_source_ptr sinfo)); + + FILE *input_file; + + JSAMPARRAY buffer; + JDIMENSION buffer_height; +}; + + +/* + * Object interface for djpeg's output file encoding modules + */ + +typedef struct djpeg_dest_struct * djpeg_dest_ptr; + +struct djpeg_dest_struct { + /* start_output is called after jpeg_start_decompress finishes. + * The color map will be ready at this time, if one is needed. + */ + JMETHOD(void, start_output, (j_decompress_ptr cinfo, + djpeg_dest_ptr dinfo)); + /* Emit the specified number of pixel rows from the buffer. */ + JMETHOD(void, put_pixel_rows, (j_decompress_ptr cinfo, + djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied)); + /* Finish up at the end of the image. */ + JMETHOD(void, finish_output, (j_decompress_ptr cinfo, + djpeg_dest_ptr dinfo)); + + /* Target file spec; filled in by djpeg.c after object is created. */ + FILE * output_file; + + /* Output pixel-row buffer. Created by module init or start_output. + * Width is cinfo->output_width * cinfo->output_components; + * height is buffer_height. + */ + JSAMPARRAY buffer; + JDIMENSION buffer_height; +}; + + +/* + * cjpeg/djpeg may need to perform extra passes to convert to or from + * the source/destination file format. The JPEG library does not know + * about these passes, but we'd like them to be counted by the progress + * monitor. We use an expanded progress monitor object to hold the + * additional pass count. + */ + +struct cdjpeg_progress_mgr { + struct jpeg_progress_mgr pub; /* fields known to JPEG library */ + int completed_extra_passes; /* extra passes completed */ + int total_extra_passes; /* total extra */ + /* last printed percentage stored here to avoid multiple printouts */ + int percent_done; +}; + +typedef struct cdjpeg_progress_mgr * cd_progress_ptr; + + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jinit_read_bmp jIRdBMP +#define jinit_write_bmp jIWrBMP +#define jinit_read_gif jIRdGIF +#define jinit_write_gif jIWrGIF +#define jinit_read_ppm jIRdPPM +#define jinit_write_ppm jIWrPPM +#define jinit_read_rle jIRdRLE +#define jinit_write_rle jIWrRLE +#define jinit_read_targa jIRdTarga +#define jinit_write_targa jIWrTarga +#define read_quant_tables RdQTables +#define read_scan_script RdScnScript +#define set_quality_ratings SetQRates +#define set_quant_slots SetQSlots +#define set_sample_factors SetSFacts +#define read_color_map RdCMap +#define enable_signal_catcher EnSigCatcher +#define start_progress_monitor StProgMon +#define end_progress_monitor EnProgMon +#define read_stdin RdStdin +#define write_stdout WrStdout +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + +/* Module selection routines for I/O modules. */ + +EXTERN(cjpeg_source_ptr) jinit_read_bmp JPP((j_compress_ptr cinfo)); +EXTERN(djpeg_dest_ptr) jinit_write_bmp JPP((j_decompress_ptr cinfo, + boolean is_os2)); +EXTERN(cjpeg_source_ptr) jinit_read_gif JPP((j_compress_ptr cinfo)); +EXTERN(djpeg_dest_ptr) jinit_write_gif JPP((j_decompress_ptr cinfo)); +EXTERN(cjpeg_source_ptr) jinit_read_ppm JPP((j_compress_ptr cinfo)); +EXTERN(djpeg_dest_ptr) jinit_write_ppm JPP((j_decompress_ptr cinfo)); +EXTERN(cjpeg_source_ptr) jinit_read_rle JPP((j_compress_ptr cinfo)); +EXTERN(djpeg_dest_ptr) jinit_write_rle JPP((j_decompress_ptr cinfo)); +EXTERN(cjpeg_source_ptr) jinit_read_targa JPP((j_compress_ptr cinfo)); +EXTERN(djpeg_dest_ptr) jinit_write_targa JPP((j_decompress_ptr cinfo)); + +/* cjpeg support routines (in rdswitch.c) */ + +EXTERN(boolean) read_quant_tables JPP((j_compress_ptr cinfo, char * filename, + boolean force_baseline)); +EXTERN(boolean) read_scan_script JPP((j_compress_ptr cinfo, char * filename)); +EXTERN(boolean) set_quality_ratings JPP((j_compress_ptr cinfo, char *arg, + boolean force_baseline)); +EXTERN(boolean) set_quant_slots JPP((j_compress_ptr cinfo, char *arg)); +EXTERN(boolean) set_sample_factors JPP((j_compress_ptr cinfo, char *arg)); + +/* djpeg support routines (in rdcolmap.c) */ + +EXTERN(void) read_color_map JPP((j_decompress_ptr cinfo, FILE * infile)); + +/* common support routines (in cdjpeg.c) */ + +EXTERN(void) enable_signal_catcher JPP((j_common_ptr cinfo)); +EXTERN(void) start_progress_monitor JPP((j_common_ptr cinfo, + cd_progress_ptr progress)); +EXTERN(void) end_progress_monitor JPP((j_common_ptr cinfo)); +EXTERN(boolean) keymatch JPP((char * arg, const char * keyword, int minchars)); +EXTERN(FILE *) read_stdin JPP((void)); +EXTERN(FILE *) write_stdout JPP((void)); + +/* miscellaneous useful macros */ + +#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */ +#define READ_BINARY "r" +#define WRITE_BINARY "w" +#else +#ifdef VMS /* VMS is very nonstandard */ +#define READ_BINARY "rb", "ctx=stm" +#define WRITE_BINARY "wb", "ctx=stm" +#else /* standard ANSI-compliant case */ +#define READ_BINARY "rb" +#define WRITE_BINARY "wb" +#endif +#endif + +#ifndef EXIT_FAILURE /* define exit() codes if not provided */ +#define EXIT_FAILURE 1 +#endif +#ifndef EXIT_SUCCESS +#ifdef VMS +#define EXIT_SUCCESS 1 /* VMS is very nonstandard */ +#else +#define EXIT_SUCCESS 0 +#endif +#endif +#ifndef EXIT_WARNING +#ifdef VMS +#define EXIT_WARNING 1 /* VMS is very nonstandard */ +#else +#define EXIT_WARNING 2 +#endif +#endif diff --git a/compat/libjpeg/change.log b/compat/libjpeg/change.log new file mode 100755 index 0000000..6d5786d --- /dev/null +++ b/compat/libjpeg/change.log @@ -0,0 +1,432 @@ +CHANGE LOG for Independent JPEG Group's JPEG software + + +Version 9b 17-Jan-2016 +----------------------- + +Improvements and optimizations in DCT and color calculations. +Normalize range limit array composition and access pattern. +Thank to Sia Furler and Maddie Ziegler for inspiration. + +Use merged upsample with scaled DCT sizes larger than 8. +Thank to Taylor Hatala for inspiration. + +Check for excessive comment lengths in argument parsing in wrjpgcom.c. +Thank to Julian Cohen for hint. + +Add makefile.b32 for use with Borland C++ 32-bit (bcc32). +Thank to Joe Slater for contribution. + +Document 'f' specifier for jpegtran -crop specification. +Thank to Michele Martone for suggestion. + +Use defined value from header instead of hardwired number in rdswitch.c. +Thank to Robert Sprowson for hint. + + +Version 9a 19-Jan-2014 +----------------------- + +Add support for wide gamut color spaces (JFIF version 2). +Improve clarity and accuracy in color conversion modules. +Note: Requires rebuild of test images. + +Extend the bit depth support to all values from 8 to 12 +(BITS_IN_JSAMPLE configuration option in jmorecfg.h). +jpegtran now supports N bits sample data precision with all N from 8 to 12 +in a single instance. Thank to Roland Fassauer for inspiration. + +Try to resolve issues with new boolean type definition. +Thank also to v4hn for suggestion. + +Enable option to use default Huffman tables for lossless compression +(for hardware solution), and in this case improve lossless RGB compression +with reversible color transform. Thank to Benny Alexandar for hint. + +Extend the entropy decoding structure, so that extraneous bytes between +compressed scan data and following marker can be reported correctly. +Thank to Nigel Tao for hint. + +Add jpegtran -wipe option and extension for -crop. +Thank to Andrew Senior, David Clunie, and Josef Schmid for suggestion. + + +Version 9 13-Jan-2013 +---------------------- + +Add cjpeg -rgb1 option to create an RGB JPEG file, and insert +a simple reversible color transform into the processing which +significantly improves the compression. +The recommended command for lossless coding of RGB images is now +cjpeg -rgb1 -block 1 -arithmetic. +As said, this option improves the compression significantly, but +the files are not compatible with JPEG decoders prior to IJG v9 +due to the included color transform. +The used color transform and marker signaling is compatible with +other JPEG standards (e.g., JPEG-LS part 2). + +Remove the automatic de-ANSI-fication support (Automake 1.12). +Thank also to Nitin A Kamble for suggestion. + +Add remark for jpeg_mem_dest() in jdatadst.c. +Thank to Elie-Gregoire Khoury for the hint. + +Support files with invalid component identifiers (created +by Adobe PDF). Thank to Robin Watts for the suggestion. + +Adapt full buffer case in jcmainct.c for use with scaled DCT. +Thank to Sergii Biloshytskyi for the suggestion. + +Add type identifier for declaration of noreturn functions. +Thank to Brett L. Moore for the suggestion. + +Correct argument type in format string, avoid compiler warnings. +Thank to Vincent Torri for hint. + +Add missing #include directives in configuration checks, avoid +configuration errors. Thank to John Spencer for the hint. + + +Version 8d 15-Jan-2012 +----------------------- + +Add cjpeg -rgb option to create RGB JPEG files. +Using this switch suppresses the conversion from RGB +colorspace input to the default YCbCr JPEG colorspace. +This feature allows true lossless JPEG coding of RGB color images. +The recommended command for this purpose is currently +cjpeg -rgb -block 1 -arithmetic. +SmartScale capable decoder (introduced with IJG JPEG 8) required. +Thank to Michael Koch for the initial suggestion. + +Add option to disable the region adjustment in the transupp crop code. +Thank to Jeffrey Friedl for the suggestion. + +Thank to Richard Jones and Edd Dawson for various minor corrections. + +Thank to Akim Demaille for configure.ac cleanup. + + +Version 8c 16-Jan-2011 +----------------------- + +Add option to compression library and cjpeg (-block N) to use +different DCT block size. +All N from 1 to 16 are possible. Default is 8 (baseline format). +Larger values produce higher compression, +smaller values produce higher quality. +SmartScale capable decoder (introduced with IJG JPEG 8) required. + + +Version 8b 16-May-2010 +----------------------- + +Repair problem in new memory source manager with corrupt JPEG data. +Thank to Ted Campbell and Samuel Chun for the report. + +Repair problem in Makefile.am test target. +Thank to anonymous user for the report. + +Support MinGW installation with automatic configure. +Thank to Volker Grabsch for the suggestion. + + +Version 8a 28-Feb-2010 +----------------------- + +Writing tables-only datastreams via jpeg_write_tables works again. + +Support 32-bit BMPs (RGB image with Alpha channel) for read in cjpeg. +Thank to Brett Blackham for the suggestion. + +Improve accuracy in floating point IDCT calculation. +Thank to Robert Hooke for the hint. + + +Version 8 10-Jan-2010 +---------------------- + +jpegtran now supports the same -scale option as djpeg for "lossless" resize. +An implementation of the JPEG SmartScale extension is required for this +feature. A (draft) specification of the JPEG SmartScale extension is +available as a contributed document at ITU and ISO. Revision 2 or later +of the document is required (latest document version is Revision 3). +The SmartScale extension will enable more features beside lossless resize +in future implementations, as described in the document (new compression +options). + +Add sanity check in BMP reader module to avoid cjpeg crash for empty input +image (thank to Isaev Ildar of ISP RAS, Moscow, RU for reporting this error). + +Add data source and destination managers for read from and write to +memory buffers. New API functions jpeg_mem_src and jpeg_mem_dest. +Thank to Roberto Boni from Italy for the suggestion. + + +Version 7 27-Jun-2009 +---------------------- + +New scaled DCTs implemented. +djpeg now supports scalings N/8 with all N from 1 to 16. +cjpeg now supports scalings 8/N with all N from 1 to 16. +Scaled DCTs with size larger than 8 are now also used for resolving the +common 2x2 chroma subsampling case without additional spatial resampling. +Separate spatial resampling for those kind of files is now only necessary +for N>8 scaling cases. +Furthermore, separate scaled DCT functions are provided for direct resolving +of the common asymmetric subsampling cases (2x1 and 1x2) without additional +spatial resampling. + +cjpeg -quality option has been extended for support of separate quality +settings for luminance and chrominance (or in general, for every provided +quantization table slot). +New API function jpeg_default_qtables() and q_scale_factor array in library. + +Added -nosmooth option to cjpeg, complementary to djpeg. +New variable "do_fancy_downsampling" in library, complement to fancy +upsampling. Fancy upsampling now uses direct DCT scaling with sizes +larger than 8. The old method is not reversible and has been removed. + +Support arithmetic entropy encoding and decoding. +Added files jaricom.c, jcarith.c, jdarith.c. + +Straighten the file structure: +Removed files jidctred.c, jcphuff.c, jchuff.h, jdphuff.c, jdhuff.h. + +jpegtran has a new "lossless" cropping feature. + +Implement -perfect option in jpegtran, new API function +jtransform_perfect_transform() in transupp. (DP 204_perfect.dpatch) + +Better error messages for jpegtran fopen failure. +(DP 203_jpegtran_errmsg.dpatch) + +Fix byte order issue with 16bit PPM/PGM files in rdppm.c/wrppm.c: +according to Netpbm, the de facto standard implementation of the PNM formats, +the most significant byte is first. (DP 203_rdppm.dpatch) + +Add -raw option to rdjpgcom not to mangle the output. +(DP 205_rdjpgcom_raw.dpatch) + +Make rdjpgcom locale aware. (DP 201_rdjpgcom_locale.dpatch) + +Add extern "C" to jpeglib.h. +This avoids the need to put extern "C" { ... } around #include "jpeglib.h" +in your C++ application. Defining the symbol DONT_USE_EXTERN_C in the +configuration prevents this. (DP 202_jpeglib.h_c++.dpatch) + + +Version 6b 27-Mar-1998 +----------------------- + +jpegtran has new features for lossless image transformations (rotation +and flipping) as well as "lossless" reduction to grayscale. + +jpegtran now copies comments by default; it has a -copy switch to enable +copying all APPn blocks as well, or to suppress comments. (Formerly it +always suppressed comments and APPn blocks.) jpegtran now also preserves +JFIF version and resolution information. + +New decompressor library feature: COM and APPn markers found in the input +file can be saved in memory for later use by the application. (Before, +you had to code this up yourself with a custom marker processor.) + +There is an unused field "void * client_data" now in compress and decompress +parameter structs; this may be useful in some applications. + +JFIF version number information is now saved by the decoder and accepted by +the encoder. jpegtran uses this to copy the source file's version number, +to ensure "jpegtran -copy all" won't create bogus files that contain JFXX +extensions but claim to be version 1.01. Applications that generate their +own JFXX extension markers also (finally) have a supported way to cause the +encoder to emit JFIF version number 1.02. + +djpeg's trace mode reports JFIF 1.02 thumbnail images as such, rather +than as unknown APP0 markers. + +In -verbose mode, djpeg and rdjpgcom will try to print the contents of +APP12 markers as text. Some digital cameras store useful text information +in APP12 markers. + +Handling of truncated data streams is more robust: blocks beyond the one in +which the error occurs will be output as uniform gray, or left unchanged +if decoding a progressive JPEG. The appearance no longer depends on the +Huffman tables being used. + +Huffman tables are checked for validity much more carefully than before. + +To avoid the Unisys LZW patent, djpeg's GIF output capability has been +changed to produce "uncompressed GIFs", and cjpeg's GIF input capability +has been removed altogether. We're not happy about it either, but there +seems to be no good alternative. + +The configure script now supports building libjpeg as a shared library +on many flavors of Unix (all the ones that GNU libtool knows how to +build shared libraries for). Use "./configure --enable-shared" to +try this out. + +New jconfig file and makefiles for Microsoft Visual C++ and Developer Studio. +Also, a jconfig file and a build script for Metrowerks CodeWarrior +on Apple Macintosh. makefile.dj has been updated for DJGPP v2, and there +are miscellaneous other minor improvements in the makefiles. + +jmemmac.c now knows how to create temporary files following Mac System 7 +conventions. + +djpeg's -map switch is now able to read raw-format PPM files reliably. + +cjpeg -progressive -restart no longer generates any unnecessary DRI markers. + +Multiple calls to jpeg_simple_progression for a single JPEG object +no longer leak memory. + + +Version 6a 7-Feb-96 +-------------------- + +Library initialization sequence modified to detect version mismatches +and struct field packing mismatches between library and calling application. +This change requires applications to be recompiled, but does not require +any application source code change. + +All routine declarations changed to the style "GLOBAL(type) name ...", +that is, GLOBAL, LOCAL, METHODDEF, EXTERN are now macros taking the +routine's return type as an argument. This makes it possible to add +Microsoft-style linkage keywords to all the routines by changing just +these macros. Note that any application code that was using these macros +will have to be changed. + +DCT coefficient quantization tables are now stored in normal array order +rather than zigzag order. Application code that calls jpeg_add_quant_table, +or otherwise manipulates quantization tables directly, will need to be +changed. If you need to make such code work with either older or newer +versions of the library, a test like "#if JPEG_LIB_VERSION >= 61" is +recommended. + +djpeg's trace capability now dumps DQT tables in natural order, not zigzag +order. This allows the trace output to be made into a "-qtables" file +more easily. + +New system-dependent memory manager module for use on Apple Macintosh. + +Fix bug in cjpeg's -smooth option: last one or two scanlines would be +duplicates of the prior line unless the image height mod 16 was 1 or 2. + +Repair minor problems in VMS, BCC, MC6 makefiles. + +New configure script based on latest GNU Autoconf. + +Correct the list of include files needed by MetroWerks C for ccommand(). + +Numerous small documentation updates. + + +Version 6 2-Aug-95 +------------------- + +Progressive JPEG support: library can read and write full progressive JPEG +files. A "buffered image" mode supports incremental decoding for on-the-fly +display of progressive images. Simply recompiling an existing IJG-v5-based +decoder with v6 should allow it to read progressive files, though of course +without any special progressive display. + +New "jpegtran" application performs lossless transcoding between different +JPEG formats; primarily, it can be used to convert baseline to progressive +JPEG and vice versa. In support of jpegtran, the library now allows lossless +reading and writing of JPEG files as DCT coefficient arrays. This ability +may be of use in other applications. + +Notes for programmers: +* We changed jpeg_start_decompress() to be able to suspend; this makes all +decoding modes available to suspending-input applications. However, +existing applications that use suspending input will need to be changed +to check the return value from jpeg_start_decompress(). You don't need to +do anything if you don't use a suspending data source. +* We changed the interface to the virtual array routines: access_virt_array +routines now take a count of the number of rows to access this time. The +last parameter to request_virt_array routines is now interpreted as the +maximum number of rows that may be accessed at once, but not necessarily +the height of every access. + + +Version 5b 15-Mar-95 +--------------------- + +Correct bugs with grayscale images having v_samp_factor > 1. + +jpeg_write_raw_data() now supports output suspension. + +Correct bugs in "configure" script for case of compiling in +a directory other than the one containing the source files. + +Repair bug in jquant1.c: sometimes didn't use as many colors as it could. + +Borland C makefile and jconfig file work under either MS-DOS or OS/2. + +Miscellaneous improvements to documentation. + + +Version 5a 7-Dec-94 +-------------------- + +Changed color conversion roundoff behavior so that grayscale values are +represented exactly. (This causes test image files to change.) + +Make ordered dither use 16x16 instead of 4x4 pattern for a small quality +improvement. + +New configure script based on latest GNU Autoconf. +Fix configure script to handle CFLAGS correctly. +Rename *.auto files to *.cfg, so that configure script still works if +file names have been truncated for DOS. + +Fix bug in rdbmp.c: didn't allow for extra data between header and image. + +Modify rdppm.c/wrppm.c to handle 2-byte raw PPM/PGM formats for 12-bit data. + +Fix several bugs in rdrle.c. + +NEED_SHORT_EXTERNAL_NAMES option was broken. + +Revise jerror.h/jerror.c for more flexibility in message table. + +Repair oversight in jmemname.c NO_MKTEMP case: file could be there +but unreadable. + + +Version 5 24-Sep-94 +-------------------- + +Version 5 represents a nearly complete redesign and rewrite of the IJG +software. Major user-visible changes include: + * Automatic configuration simplifies installation for most Unix systems. + * A range of speed vs. image quality tradeoffs are supported. + This includes resizing of an image during decompression: scaling down + by a factor of 1/2, 1/4, or 1/8 is handled very efficiently. + * New programs rdjpgcom and wrjpgcom allow insertion and extraction + of text comments in a JPEG file. + +The application programmer's interface to the library has changed completely. +Notable improvements include: + * We have eliminated the use of callback routines for handling the + uncompressed image data. The application now sees the library as a + set of routines that it calls to read or write image data on a + scanline-by-scanline basis. + * The application image data is represented in a conventional interleaved- + pixel format, rather than as a separate array for each color channel. + This can save a copying step in many programs. + * The handling of compressed data has been cleaned up: the application can + supply routines to source or sink the compressed data. It is possible to + suspend processing on source/sink buffer overrun, although this is not + supported in all operating modes. + * All static state has been eliminated from the library, so that multiple + instances of compression or decompression can be active concurrently. + * JPEG abbreviated datastream formats are supported, ie, quantization and + Huffman tables can be stored separately from the image data. + * And not only that, but the documentation of the library has improved + considerably! + + +The last widely used release before the version 5 rewrite was version 4A of +18-Feb-93. Change logs before that point have been discarded, since they +are not of much interest after the rewrite. diff --git a/compat/libjpeg/cjpeg.1 b/compat/libjpeg/cjpeg.1 new file mode 100755 index 0000000..1b706a9 --- /dev/null +++ b/compat/libjpeg/cjpeg.1 @@ -0,0 +1,387 @@ +.TH CJPEG 1 "26 July 2015" +.SH NAME +cjpeg \- compress an image file to a JPEG file +.SH SYNOPSIS +.B cjpeg +[ +.I options +] +[ +.I filename +] +.LP +.SH DESCRIPTION +.LP +.B cjpeg +compresses the named image file, or the standard input if no file is +named, and produces a JPEG/JFIF file on the standard output. +The currently supported input file formats are: PPM (PBMPLUS color +format), PGM (PBMPLUS grayscale format), BMP, Targa, and RLE (Utah Raster +Toolkit format). (RLE is supported only if the URT library is available.) +.SH OPTIONS +All switch names may be abbreviated; for example, +.B \-grayscale +may be written +.B \-gray +or +.BR \-gr . +Most of the "basic" switches can be abbreviated to as little as one letter. +Upper and lower case are equivalent (thus +.B \-BMP +is the same as +.BR \-bmp ). +British spellings are also accepted (e.g., +.BR \-greyscale ), +though for brevity these are not mentioned below. +.PP +The basic switches are: +.TP +.BI \-quality " N[,...]" +Scale quantization tables to adjust image quality. Quality is 0 (worst) to +100 (best); default is 75. (See below for more info.) +.TP +.B \-grayscale +Create monochrome JPEG file from color input. Be sure to use this switch when +compressing a grayscale BMP file, because +.B cjpeg +isn't bright enough to notice whether a BMP file uses only shades of gray. +By saying +.BR \-grayscale , +you'll get a smaller JPEG file that takes less time to process. +.TP +.B \-rgb +Create RGB JPEG file. +Using this switch suppresses the conversion from RGB +colorspace input to the default YCbCr JPEG colorspace. +You can use this switch in combination with the +.BI \-block " N" +switch (see below) for lossless JPEG coding. +See also the +.B \-rgb1 +switch below. +.TP +.B \-optimize +Perform optimization of entropy encoding parameters. Without this, default +encoding parameters are used. +.B \-optimize +usually makes the JPEG file a little smaller, but +.B cjpeg +runs somewhat slower and needs much more memory. Image quality and speed of +decompression are unaffected by +.BR \-optimize . +.TP +.B \-progressive +Create progressive JPEG file (see below). +.TP +.BI \-scale " M/N" +Scale the output image by a factor M/N. Currently supported scale factors are +M/N with all N from 1 to 16, where M is the destination DCT size, which is 8 +by default (see +.BI \-block " N" +switch below). +.TP +.B \-targa +Input file is Targa format. Targa files that contain an "identification" +field will not be automatically recognized by +.BR cjpeg ; +for such files you must specify +.B \-targa +to make +.B cjpeg +treat the input as Targa format. +For most Targa files, you won't need this switch. +.PP +The +.B \-quality +switch lets you trade off compressed file size against quality of the +reconstructed image: the higher the quality setting, the larger the JPEG file, +and the closer the output image will be to the original input. Normally you +want to use the lowest quality setting (smallest file) that decompresses into +something visually indistinguishable from the original image. For this +purpose the quality setting should be between 50 and 95; the default of 75 is +often about right. If you see defects at +.B \-quality +75, then go up 5 or 10 counts at a time until you are happy with the output +image. (The optimal setting will vary from one image to another.) +.PP +.B \-quality +100 will generate a quantization table of all 1's, minimizing loss in the +quantization step (but there is still information loss in subsampling, as well +as roundoff error). This setting is mainly of interest for experimental +purposes. Quality values above about 95 are +.B not +recommended for normal use; the compressed file size goes up dramatically for +hardly any gain in output image quality. +.PP +In the other direction, quality values below 50 will produce very small files +of low image quality. Settings around 5 to 10 might be useful in preparing an +index of a large image library, for example. Try +.B \-quality +2 (or so) for some amusing Cubist effects. (Note: quality +values below about 25 generate 2-byte quantization tables, which are +considered optional in the JPEG standard. +.B cjpeg +emits a warning message when you give such a quality value, because some +other JPEG programs may be unable to decode the resulting file. Use +.B \-baseline +if you need to ensure compatibility at low quality values.) +.PP +The +.B \-quality +option has been extended in IJG version 7 for support of separate quality +settings for luminance and chrominance (or in general, for every provided +quantization table slot). This feature is useful for high-quality +applications which cannot accept the damage of color data by coarse +subsampling settings. You can now easily reduce the color data amount more +smoothly with finer control without separate subsampling. The resulting file +is fully compliant with standard JPEG decoders. +Note that the +.B \-quality +ratings refer to the quantization table slots, and that the last value is +replicated if there are more q-table slots than parameters. The default +q-table slots are 0 for luminance and 1 for chrominance with default tables as +given in the JPEG standard. This is compatible with the old behaviour in case +that only one parameter is given, which is then used for both luminance and +chrominance (slots 0 and 1). More or custom quantization tables can be set +with +.B \-qtables +and assigned to components with +.B \-qslots +parameter (see the "wizard" switches below). +.B Caution: +You must explicitly add +.BI \-sample " 1x1" +for efficient separate color +quality selection, since the default value used by library is 2x2! +.PP +The +.B \-progressive +switch creates a "progressive JPEG" file. In this type of JPEG file, the data +is stored in multiple scans of increasing quality. If the file is being +transmitted over a slow communications link, the decoder can use the first +scan to display a low-quality image very quickly, and can then improve the +display with each subsequent scan. The final image is exactly equivalent to a +standard JPEG file of the same quality setting, and the total file size is +about the same --- often a little smaller. +.PP +Switches for advanced users: +.TP +.B \-arithmetic +Use arithmetic coding. +.B Caution: +arithmetic coded JPEG is not yet widely implemented, so many decoders will +be unable to view an arithmetic coded JPEG file at all. +.TP +.BI \-block " N" +Set DCT block size. All N from 1 to 16 are possible. +Default is 8 (baseline format). +Larger values produce higher compression, +smaller values produce higher quality +(exact DCT stage possible with 1 or 2; with the default quality of 75 and +default Luminance qtable the DCT+Quantization stage is lossless for N=1). +.B Caution: +An implementation of the JPEG SmartScale extension is required for this +feature. SmartScale enabled JPEG is not yet widely implemented, so many +decoders will be unable to view a SmartScale extended JPEG file at all. +.TP +.B \-rgb1 +Create RGB JPEG file with reversible color transform. +Works like the +.B \-rgb +switch (see above) and inserts a simple reversible color transform +into the processing which significantly improves the compression. +Use this switch in combination with the +.BI \-block " N" +switch (see above) for lossless JPEG coding. +.B Caution: +A decoder with inverse color transform support is required for +this feature. Reversible color transform support is not yet +widely implemented, so many decoders will be unable to view +a reversible color transformed JPEG file at all. +.TP +.B \-bgycc +Create big gamut YCC JPEG file. +In this type of encoding the color difference components are quantized +further by a factor of 2 compared to the normal Cb/Cr values, thus creating +space to allow larger color values with higher saturation than the normal +gamut limits to be encoded. In order to compensate for the loss of color +fidelity compared to a normal YCC encoded file, the color quantization +tables can be adjusted accordingly. For example, +.B cjpeg \-bgycc \-quality +80,90 will give similar results as +.B cjpeg \-quality +80. +.B Caution: +For correct decompression a decoder with big gamut YCC support (JFIF +version 2) is required. An old decoder may or may not display a big +gamut YCC encoded JPEG file, depending on JFIF version check and +corresponding warning/error configuration. In case of a granted +decompression the old decoder will display the image with half +saturated colors. +.TP +.B \-dct int +Use integer DCT method (default). +.TP +.B \-dct fast +Use fast integer DCT (less accurate). +.TP +.B \-dct float +Use floating-point DCT method. +The float method is very slightly more accurate than the int method, but is +much slower unless your machine has very fast floating-point hardware. Also +note that results of the floating-point method may vary slightly across +machines, while the integer methods should give the same results everywhere. +The fast integer method is much less accurate than the other two. +.TP +.B \-nosmooth +Don't use high-quality downsampling. +.TP +.BI \-restart " N" +Emit a JPEG restart marker every N MCU rows, or every N MCU blocks if "B" is +attached to the number. +.B \-restart 0 +(the default) means no restart markers. +.TP +.BI \-smooth " N" +Smooth the input image to eliminate dithering noise. N, ranging from 1 to +100, indicates the strength of smoothing. 0 (the default) means no smoothing. +.TP +.BI \-maxmemory " N" +Set limit for amount of memory to use in processing large images. Value is +in thousands of bytes, or millions of bytes if "M" is attached to the +number. For example, +.B \-max 4m +selects 4000000 bytes. If more space is needed, temporary files will be used. +.TP +.BI \-outfile " name" +Send output image to the named file, not to standard output. +.TP +.B \-verbose +Enable debug printout. More +.BR \-v 's +give more output. Also, version information is printed at startup. +.TP +.B \-debug +Same as +.BR \-verbose . +.PP +The +.B \-restart +option inserts extra markers that allow a JPEG decoder to resynchronize after +a transmission error. Without restart markers, any damage to a compressed +file will usually ruin the image from the point of the error to the end of the +image; with restart markers, the damage is usually confined to the portion of +the image up to the next restart marker. Of course, the restart markers +occupy extra space. We recommend +.B \-restart 1 +for images that will be transmitted across unreliable networks such as Usenet. +.PP +The +.B \-smooth +option filters the input to eliminate fine-scale noise. This is often useful +when converting dithered images to JPEG: a moderate smoothing factor of 10 to +50 gets rid of dithering patterns in the input file, resulting in a smaller +JPEG file and a better-looking image. Too large a smoothing factor will +visibly blur the image, however. +.PP +Switches for wizards: +.TP +.B \-baseline +Force baseline-compatible quantization tables to be generated. This clamps +quantization values to 8 bits even at low quality settings. (This switch is +poorly named, since it does not ensure that the output is actually baseline +JPEG. For example, you can use +.B \-baseline +and +.B \-progressive +together.) +.TP +.BI \-qtables " file" +Use the quantization tables given in the specified text file. +.TP +.BI \-qslots " N[,...]" +Select which quantization table to use for each color component. +.TP +.BI \-sample " HxV[,...]" +Set JPEG sampling factors for each color component. +.TP +.BI \-scans " file" +Use the scan script given in the specified text file. +.PP +The "wizard" switches are intended for experimentation with JPEG. If you +don't know what you are doing, \fBdon't use them\fR. These switches are +documented further in the file wizard.txt. +.SH EXAMPLES +.LP +This example compresses the PPM file foo.ppm with a quality factor of +60 and saves the output as foo.jpg: +.IP +.B cjpeg \-quality +.I 60 foo.ppm +.B > +.I foo.jpg +.SH HINTS +Color GIF files are not the ideal input for JPEG; JPEG is really intended for +compressing full-color (24-bit) images. In particular, don't try to convert +cartoons, line drawings, and other images that have only a few distinct +colors. GIF works great on these, JPEG does not. If you want to convert a +GIF to JPEG, you should experiment with +.BR cjpeg 's +.B \-quality +and +.B \-smooth +options to get a satisfactory conversion. +.B \-smooth 10 +or so is often helpful. +.PP +Avoid running an image through a series of JPEG compression/decompression +cycles. Image quality loss will accumulate; after ten or so cycles the image +may be noticeably worse than it was after one cycle. It's best to use a +lossless format while manipulating an image, then convert to JPEG format when +you are ready to file the image away. +.PP +The +.B \-optimize +option to +.B cjpeg +is worth using when you are making a "final" version for posting or archiving. +It's also a win when you are using low quality settings to make very small +JPEG files; the percentage improvement is often a lot more than it is on +larger files. (At present, +.B \-optimize +mode is always selected when generating progressive JPEG files.) +.SH ENVIRONMENT +.TP +.B JPEGMEM +If this environment variable is set, its value is the default memory limit. +The value is specified as described for the +.B \-maxmemory +switch. +.B JPEGMEM +overrides the default value specified when the program was compiled, and +itself is overridden by an explicit +.BR \-maxmemory . +.SH SEE ALSO +.BR djpeg (1), +.BR jpegtran (1), +.BR rdjpgcom (1), +.BR wrjpgcom (1) +.br +.BR ppm (5), +.BR pgm (5) +.br +Wallace, Gregory K. "The JPEG Still Picture Compression Standard", +Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44. +.SH AUTHOR +Independent JPEG Group +.SH BUGS +GIF input files are no longer supported, to avoid the Unisys LZW patent +(now expired). +(Conversion of GIF files to JPEG is usually a bad idea anyway.) +.PP +Not all variants of BMP and Targa file formats are supported. +.PP +The +.B \-targa +switch is not a bug, it's a feature. (It would be a bug if the Targa format +designers had not been clueless.) diff --git a/compat/libjpeg/cjpeg.c b/compat/libjpeg/cjpeg.c new file mode 100755 index 0000000..b9b65b8 --- /dev/null +++ b/compat/libjpeg/cjpeg.c @@ -0,0 +1,664 @@ +/* + * cjpeg.c + * + * Copyright (C) 1991-1998, Thomas G. Lane. + * Modified 2003-2013 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a command-line user interface for the JPEG compressor. + * It should work on any system with Unix- or MS-DOS-style command lines. + * + * Two different command line styles are permitted, depending on the + * compile-time switch TWO_FILE_COMMANDLINE: + * cjpeg [options] inputfile outputfile + * cjpeg [options] [inputfile] + * In the second style, output is always to standard output, which you'd + * normally redirect to a file or pipe to some other program. Input is + * either from a named file or from standard input (typically redirected). + * The second style is convenient on Unix but is unhelpful on systems that + * don't support pipes. Also, you MUST use the first style if your system + * doesn't do binary I/O to stdin/stdout. + * To simplify script writing, the "-outfile" switch is provided. The syntax + * cjpeg [options] -outfile outputfile inputfile + * works regardless of which command line style is used. + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ +#include "jversion.h" /* for version message */ + +#ifdef USE_CCOMMAND /* command-line reader for Macintosh */ +#ifdef __MWERKS__ +#include /* Metrowerks needs this */ +#include /* ... and this */ +#endif +#ifdef THINK_C +#include /* Think declares it here */ +#endif +#endif + + +/* Create the add-on message string table. */ + +#define JMESSAGE(code,string) string , + +static const char * const cdjpeg_message_table[] = { +#include "cderror.h" + NULL +}; + + +/* + * This routine determines what format the input file is, + * and selects the appropriate input-reading module. + * + * To determine which family of input formats the file belongs to, + * we may look only at the first byte of the file, since C does not + * guarantee that more than one character can be pushed back with ungetc. + * Looking at additional bytes would require one of these approaches: + * 1) assume we can fseek() the input file (fails for piped input); + * 2) assume we can push back more than one character (works in + * some C implementations, but unportable); + * 3) provide our own buffering (breaks input readers that want to use + * stdio directly, such as the RLE library); + * or 4) don't put back the data, and modify the input_init methods to assume + * they start reading after the start of file (also breaks RLE library). + * #1 is attractive for MS-DOS but is untenable on Unix. + * + * The most portable solution for file types that can't be identified by their + * first byte is to make the user tell us what they are. This is also the + * only approach for "raw" file types that contain only arbitrary values. + * We presently apply this method for Targa files. Most of the time Targa + * files start with 0x00, so we recognize that case. Potentially, however, + * a Targa file could start with any byte value (byte 0 is the length of the + * seldom-used ID field), so we provide a switch to force Targa input mode. + */ + +static boolean is_targa; /* records user -targa switch */ + + +LOCAL(cjpeg_source_ptr) +select_file_type (j_compress_ptr cinfo, FILE * infile) +{ + int c; + + if (is_targa) { +#ifdef TARGA_SUPPORTED + return jinit_read_targa(cinfo); +#else + ERREXIT(cinfo, JERR_TGA_NOTCOMP); +#endif + } + + if ((c = getc(infile)) == EOF) + ERREXIT(cinfo, JERR_INPUT_EMPTY); + if (ungetc(c, infile) == EOF) + ERREXIT(cinfo, JERR_UNGETC_FAILED); + + switch (c) { +#ifdef BMP_SUPPORTED + case 'B': + return jinit_read_bmp(cinfo); +#endif +#ifdef GIF_SUPPORTED + case 'G': + return jinit_read_gif(cinfo); +#endif +#ifdef PPM_SUPPORTED + case 'P': + return jinit_read_ppm(cinfo); +#endif +#ifdef RLE_SUPPORTED + case 'R': + return jinit_read_rle(cinfo); +#endif +#ifdef TARGA_SUPPORTED + case 0x00: + return jinit_read_targa(cinfo); +#endif + default: + ERREXIT(cinfo, JERR_UNKNOWN_FORMAT); + break; + } + + return NULL; /* suppress compiler warnings */ +} + + +/* + * Argument-parsing code. + * The switch parser is designed to be useful with DOS-style command line + * syntax, ie, intermixed switches and file names, where only the switches + * to the left of a given file name affect processing of that file. + * The main program in this file doesn't actually use this capability... + */ + + +static const char * progname; /* program name for error messages */ +static char * outfilename; /* for -outfile switch */ + + +LOCAL(void) +usage (void) +/* complain about bad command line */ +{ + fprintf(stderr, "usage: %s [switches] ", progname); +#ifdef TWO_FILE_COMMANDLINE + fprintf(stderr, "inputfile outputfile\n"); +#else + fprintf(stderr, "[inputfile]\n"); +#endif + + fprintf(stderr, "Switches (names may be abbreviated):\n"); + fprintf(stderr, " -quality N[,...] Compression quality (0..100; 5-95 is useful range)\n"); + fprintf(stderr, " -grayscale Create monochrome JPEG file\n"); + fprintf(stderr, " -rgb Create RGB JPEG file\n"); +#ifdef ENTROPY_OPT_SUPPORTED + fprintf(stderr, " -optimize Optimize Huffman table (smaller file, but slow compression)\n"); +#endif +#ifdef C_PROGRESSIVE_SUPPORTED + fprintf(stderr, " -progressive Create progressive JPEG file\n"); +#endif +#ifdef DCT_SCALING_SUPPORTED + fprintf(stderr, " -scale M/N Scale image by fraction M/N, eg, 1/2\n"); +#endif +#ifdef TARGA_SUPPORTED + fprintf(stderr, " -targa Input file is Targa format (usually not needed)\n"); +#endif + fprintf(stderr, "Switches for advanced users:\n"); +#ifdef C_ARITH_CODING_SUPPORTED + fprintf(stderr, " -arithmetic Use arithmetic coding\n"); +#endif +#ifdef DCT_SCALING_SUPPORTED + fprintf(stderr, " -block N DCT block size (1..16; default is 8)\n"); +#endif +#if JPEG_LIB_VERSION_MAJOR >= 9 + fprintf(stderr, " -rgb1 Create RGB JPEG file with reversible color transform\n"); + fprintf(stderr, " -bgycc Create big gamut YCC JPEG file\n"); +#endif +#ifdef DCT_ISLOW_SUPPORTED + fprintf(stderr, " -dct int Use integer DCT method%s\n", + (JDCT_DEFAULT == JDCT_ISLOW ? " (default)" : "")); +#endif +#ifdef DCT_IFAST_SUPPORTED + fprintf(stderr, " -dct fast Use fast integer DCT (less accurate)%s\n", + (JDCT_DEFAULT == JDCT_IFAST ? " (default)" : "")); +#endif +#ifdef DCT_FLOAT_SUPPORTED + fprintf(stderr, " -dct float Use floating-point DCT method%s\n", + (JDCT_DEFAULT == JDCT_FLOAT ? " (default)" : "")); +#endif + fprintf(stderr, " -nosmooth Don't use high-quality downsampling\n"); + fprintf(stderr, " -restart N Set restart interval in rows, or in blocks with B\n"); +#ifdef INPUT_SMOOTHING_SUPPORTED + fprintf(stderr, " -smooth N Smooth dithered input (N=1..100 is strength)\n"); +#endif + fprintf(stderr, " -maxmemory N Maximum memory to use (in kbytes)\n"); + fprintf(stderr, " -outfile name Specify name for output file\n"); + fprintf(stderr, " -verbose or -debug Emit debug output\n"); + fprintf(stderr, "Switches for wizards:\n"); + fprintf(stderr, " -baseline Force baseline quantization tables\n"); + fprintf(stderr, " -qtables file Use quantization tables given in file\n"); + fprintf(stderr, " -qslots N[,...] Set component quantization tables\n"); + fprintf(stderr, " -sample HxV[,...] Set component sampling factors\n"); +#ifdef C_MULTISCAN_FILES_SUPPORTED + fprintf(stderr, " -scans file Create multi-scan JPEG per script file\n"); +#endif + exit(EXIT_FAILURE); +} + + +LOCAL(int) +parse_switches (j_compress_ptr cinfo, int argc, char **argv, + int last_file_arg_seen, boolean for_real) +/* Parse optional switches. + * Returns argv[] index of first file-name argument (== argc if none). + * Any file names with indexes <= last_file_arg_seen are ignored; + * they have presumably been processed in a previous iteration. + * (Pass 0 for last_file_arg_seen on the first or only iteration.) + * for_real is FALSE on the first (dummy) pass; we may skip any expensive + * processing. + */ +{ + int argn; + char * arg; + boolean force_baseline; + boolean simple_progressive; + char * qualityarg = NULL; /* saves -quality parm if any */ + char * qtablefile = NULL; /* saves -qtables filename if any */ + char * qslotsarg = NULL; /* saves -qslots parm if any */ + char * samplearg = NULL; /* saves -sample parm if any */ + char * scansarg = NULL; /* saves -scans parm if any */ + + /* Set up default JPEG parameters. */ + + force_baseline = FALSE; /* by default, allow 16-bit quantizers */ + simple_progressive = FALSE; + is_targa = FALSE; + outfilename = NULL; + cinfo->err->trace_level = 0; + + /* Scan command line options, adjust parameters */ + + for (argn = 1; argn < argc; argn++) { + arg = argv[argn]; + if (*arg != '-') { + /* Not a switch, must be a file name argument */ + if (argn <= last_file_arg_seen) { + outfilename = NULL; /* -outfile applies to just one input file */ + continue; /* ignore this name if previously processed */ + } + break; /* else done parsing switches */ + } + arg++; /* advance past switch marker character */ + + if (keymatch(arg, "arithmetic", 1)) { + /* Use arithmetic coding. */ +#ifdef C_ARITH_CODING_SUPPORTED + cinfo->arith_code = TRUE; +#else + fprintf(stderr, "%s: sorry, arithmetic coding not supported\n", + progname); + exit(EXIT_FAILURE); +#endif + + } else if (keymatch(arg, "baseline", 2)) { + /* Force baseline-compatible output (8-bit quantizer values). */ + force_baseline = TRUE; + + } else if (keymatch(arg, "block", 2)) { + /* Set DCT block size. */ +#if defined DCT_SCALING_SUPPORTED && JPEG_LIB_VERSION_MAJOR >= 8 && \ + (JPEG_LIB_VERSION_MAJOR > 8 || JPEG_LIB_VERSION_MINOR >= 3) + int val; + + if (++argn >= argc) /* advance to next argument */ + usage(); + if (sscanf(argv[argn], "%d", &val) != 1) + usage(); + if (val < 1 || val > 16) + usage(); + cinfo->block_size = val; +#else + fprintf(stderr, "%s: sorry, block size setting not supported\n", + progname); + exit(EXIT_FAILURE); +#endif + + } else if (keymatch(arg, "dct", 2)) { + /* Select DCT algorithm. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + if (keymatch(argv[argn], "int", 1)) { + cinfo->dct_method = JDCT_ISLOW; + } else if (keymatch(argv[argn], "fast", 2)) { + cinfo->dct_method = JDCT_IFAST; + } else if (keymatch(argv[argn], "float", 2)) { + cinfo->dct_method = JDCT_FLOAT; + } else + usage(); + + } else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) { + /* Enable debug printouts. */ + /* On first -d, print version identification */ + static boolean printed_version = FALSE; + + if (! printed_version) { + fprintf(stderr, "Independent JPEG Group's CJPEG, version %s\n%s\n", + JVERSION, JCOPYRIGHT); + printed_version = TRUE; + } + cinfo->err->trace_level++; + + } else if (keymatch(arg, "grayscale", 2) || keymatch(arg, "greyscale",2)) { + /* Force a monochrome JPEG file to be generated. */ + jpeg_set_colorspace(cinfo, JCS_GRAYSCALE); + + } else if (keymatch(arg, "rgb", 3) || keymatch(arg, "rgb1", 4)) { + /* Force an RGB JPEG file to be generated. */ +#if JPEG_LIB_VERSION_MAJOR >= 9 + /* Note: Entropy table assignment in jpeg_set_colorspace depends + * on color_transform. + */ + cinfo->color_transform = arg[3] ? JCT_SUBTRACT_GREEN : JCT_NONE; +#endif + jpeg_set_colorspace(cinfo, JCS_RGB); + + } else if (keymatch(arg, "bgycc", 5)) { + /* Force a big gamut YCC JPEG file to be generated. */ +#if JPEG_LIB_VERSION_MAJOR >= 9 && \ + (JPEG_LIB_VERSION_MAJOR > 9 || JPEG_LIB_VERSION_MINOR >= 1) + jpeg_set_colorspace(cinfo, JCS_BG_YCC); +#else + fprintf(stderr, "%s: sorry, BG_YCC colorspace not supported\n", + progname); + exit(EXIT_FAILURE); +#endif + + } else if (keymatch(arg, "maxmemory", 3)) { + /* Maximum memory in Kb (or Mb with 'm'). */ + long lval; + char ch = 'x'; + + if (++argn >= argc) /* advance to next argument */ + usage(); + if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1) + usage(); + if (ch == 'm' || ch == 'M') + lval *= 1000L; + cinfo->mem->max_memory_to_use = lval * 1000L; + + } else if (keymatch(arg, "nosmooth", 3)) { + /* Suppress fancy downsampling. */ + cinfo->do_fancy_downsampling = FALSE; + + } else if (keymatch(arg, "optimize", 1) || keymatch(arg, "optimise", 1)) { + /* Enable entropy parm optimization. */ +#ifdef ENTROPY_OPT_SUPPORTED + cinfo->optimize_coding = TRUE; +#else + fprintf(stderr, "%s: sorry, entropy optimization was not compiled\n", + progname); + exit(EXIT_FAILURE); +#endif + + } else if (keymatch(arg, "outfile", 4)) { + /* Set output file name. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + outfilename = argv[argn]; /* save it away for later use */ + + } else if (keymatch(arg, "progressive", 1)) { + /* Select simple progressive mode. */ +#ifdef C_PROGRESSIVE_SUPPORTED + simple_progressive = TRUE; + /* We must postpone execution until num_components is known. */ +#else + fprintf(stderr, "%s: sorry, progressive output was not compiled\n", + progname); + exit(EXIT_FAILURE); +#endif + + } else if (keymatch(arg, "quality", 1)) { + /* Quality ratings (quantization table scaling factors). */ + if (++argn >= argc) /* advance to next argument */ + usage(); + qualityarg = argv[argn]; + + } else if (keymatch(arg, "qslots", 2)) { + /* Quantization table slot numbers. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + qslotsarg = argv[argn]; + /* Must delay setting qslots until after we have processed any + * colorspace-determining switches, since jpeg_set_colorspace sets + * default quant table numbers. + */ + + } else if (keymatch(arg, "qtables", 2)) { + /* Quantization tables fetched from file. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + qtablefile = argv[argn]; + /* We postpone actually reading the file in case -quality comes later. */ + + } else if (keymatch(arg, "restart", 1)) { + /* Restart interval in MCU rows (or in MCUs with 'b'). */ + long lval; + char ch = 'x'; + + if (++argn >= argc) /* advance to next argument */ + usage(); + if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1) + usage(); + if (lval < 0 || lval > 65535L) + usage(); + if (ch == 'b' || ch == 'B') { + cinfo->restart_interval = (unsigned int) lval; + cinfo->restart_in_rows = 0; /* else prior '-restart n' overrides me */ + } else { + cinfo->restart_in_rows = (int) lval; + /* restart_interval will be computed during startup */ + } + + } else if (keymatch(arg, "sample", 2)) { + /* Set sampling factors. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + samplearg = argv[argn]; + /* Must delay setting sample factors until after we have processed any + * colorspace-determining switches, since jpeg_set_colorspace sets + * default sampling factors. + */ + + } else if (keymatch(arg, "scale", 4)) { + /* Scale the image by a fraction M/N. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + if (sscanf(argv[argn], "%u/%u", + &cinfo->scale_num, &cinfo->scale_denom) != 2) + usage(); + + } else if (keymatch(arg, "scans", 4)) { + /* Set scan script. */ +#ifdef C_MULTISCAN_FILES_SUPPORTED + if (++argn >= argc) /* advance to next argument */ + usage(); + scansarg = argv[argn]; + /* We must postpone reading the file in case -progressive appears. */ +#else + fprintf(stderr, "%s: sorry, multi-scan output was not compiled\n", + progname); + exit(EXIT_FAILURE); +#endif + + } else if (keymatch(arg, "smooth", 2)) { + /* Set input smoothing factor. */ + int val; + + if (++argn >= argc) /* advance to next argument */ + usage(); + if (sscanf(argv[argn], "%d", &val) != 1) + usage(); + if (val < 0 || val > 100) + usage(); + cinfo->smoothing_factor = val; + + } else if (keymatch(arg, "targa", 1)) { + /* Input file is Targa format. */ + is_targa = TRUE; + + } else { + usage(); /* bogus switch */ + } + } + + /* Post-switch-scanning cleanup */ + + if (for_real) { + + /* Set quantization tables for selected quality. */ + /* Some or all may be overridden if -qtables is present. */ + if (qualityarg != NULL) /* process -quality if it was present */ + if (! set_quality_ratings(cinfo, qualityarg, force_baseline)) + usage(); + + if (qtablefile != NULL) /* process -qtables if it was present */ + if (! read_quant_tables(cinfo, qtablefile, force_baseline)) + usage(); + + if (qslotsarg != NULL) /* process -qslots if it was present */ + if (! set_quant_slots(cinfo, qslotsarg)) + usage(); + + if (samplearg != NULL) /* process -sample if it was present */ + if (! set_sample_factors(cinfo, samplearg)) + usage(); + +#ifdef C_PROGRESSIVE_SUPPORTED + if (simple_progressive) /* process -progressive; -scans can override */ + jpeg_simple_progression(cinfo); +#endif + +#ifdef C_MULTISCAN_FILES_SUPPORTED + if (scansarg != NULL) /* process -scans if it was present */ + if (! read_scan_script(cinfo, scansarg)) + usage(); +#endif + } + + return argn; /* return index of next arg (file name) */ +} + + +/* + * The main program. + */ + +int +main (int argc, char **argv) +{ + struct jpeg_compress_struct cinfo; + struct jpeg_error_mgr jerr; +#ifdef PROGRESS_REPORT + struct cdjpeg_progress_mgr progress; +#endif + int file_index; + cjpeg_source_ptr src_mgr; + FILE * input_file; + FILE * output_file; + JDIMENSION num_scanlines; + + /* On Mac, fetch a command line. */ +#ifdef USE_CCOMMAND + argc = ccommand(&argv); +#endif + + progname = argv[0]; + if (progname == NULL || progname[0] == 0) + progname = "cjpeg"; /* in case C library doesn't provide it */ + + /* Initialize the JPEG compression object with default error handling. */ + cinfo.err = jpeg_std_error(&jerr); + jpeg_create_compress(&cinfo); + /* Add some application-specific error messages (from cderror.h) */ + jerr.addon_message_table = cdjpeg_message_table; + jerr.first_addon_message = JMSG_FIRSTADDONCODE; + jerr.last_addon_message = JMSG_LASTADDONCODE; + + /* Now safe to enable signal catcher. */ +#ifdef NEED_SIGNAL_CATCHER + enable_signal_catcher((j_common_ptr) &cinfo); +#endif + + /* Initialize JPEG parameters. + * Much of this may be overridden later. + * In particular, we don't yet know the input file's color space, + * but we need to provide some value for jpeg_set_defaults() to work. + */ + + cinfo.in_color_space = JCS_RGB; /* arbitrary guess */ + jpeg_set_defaults(&cinfo); + + /* Scan command line to find file names. + * It is convenient to use just one switch-parsing routine, but the switch + * values read here are ignored; we will rescan the switches after opening + * the input file. + */ + + file_index = parse_switches(&cinfo, argc, argv, 0, FALSE); + +#ifdef TWO_FILE_COMMANDLINE + /* Must have either -outfile switch or explicit output file name */ + if (outfilename == NULL) { + if (file_index != argc-2) { + fprintf(stderr, "%s: must name one input and one output file\n", + progname); + usage(); + } + outfilename = argv[file_index+1]; + } else { + if (file_index != argc-1) { + fprintf(stderr, "%s: must name one input and one output file\n", + progname); + usage(); + } + } +#else + /* Unix style: expect zero or one file name */ + if (file_index < argc-1) { + fprintf(stderr, "%s: only one input file\n", progname); + usage(); + } +#endif /* TWO_FILE_COMMANDLINE */ + + /* Open the input file. */ + if (file_index < argc) { + if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]); + exit(EXIT_FAILURE); + } + } else { + /* default input file is stdin */ + input_file = read_stdin(); + } + + /* Open the output file. */ + if (outfilename != NULL) { + if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open %s\n", progname, outfilename); + exit(EXIT_FAILURE); + } + } else { + /* default output file is stdout */ + output_file = write_stdout(); + } + +#ifdef PROGRESS_REPORT + start_progress_monitor((j_common_ptr) &cinfo, &progress); +#endif + + /* Figure out the input file format, and set up to read it. */ + src_mgr = select_file_type(&cinfo, input_file); + src_mgr->input_file = input_file; + + /* Read the input file header to obtain file size & colorspace. */ + (*src_mgr->start_input) (&cinfo, src_mgr); + + /* Now that we know input colorspace, fix colorspace-dependent defaults */ + jpeg_default_colorspace(&cinfo); + + /* Adjust default compression parameters by re-parsing the options */ + file_index = parse_switches(&cinfo, argc, argv, 0, TRUE); + + /* Specify data destination for compression */ + jpeg_stdio_dest(&cinfo, output_file); + + /* Start compressor */ + jpeg_start_compress(&cinfo, TRUE); + + /* Process data */ + while (cinfo.next_scanline < cinfo.image_height) { + num_scanlines = (*src_mgr->get_pixel_rows) (&cinfo, src_mgr); + (void) jpeg_write_scanlines(&cinfo, src_mgr->buffer, num_scanlines); + } + + /* Finish compression and release memory */ + (*src_mgr->finish_input) (&cinfo, src_mgr); + jpeg_finish_compress(&cinfo); + jpeg_destroy_compress(&cinfo); + + /* Close files, if we opened them */ + if (input_file != stdin) + fclose(input_file); + if (output_file != stdout) + fclose(output_file); + +#ifdef PROGRESS_REPORT + end_progress_monitor((j_common_ptr) &cinfo); +#endif + + /* All done. */ + exit(jerr.num_warnings ? EXIT_WARNING : EXIT_SUCCESS); + return 0; /* suppress no-return-value warnings */ +} diff --git a/compat/libjpeg/ckconfig.c b/compat/libjpeg/ckconfig.c new file mode 100755 index 0000000..fb9429a --- /dev/null +++ b/compat/libjpeg/ckconfig.c @@ -0,0 +1,402 @@ +/* + * ckconfig.c + * + * Copyright (C) 1991-1994, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + */ + +/* + * This program is intended to help you determine how to configure the JPEG + * software for installation on a particular system. The idea is to try to + * compile and execute this program. If your compiler fails to compile the + * program, make changes as indicated in the comments below. Once you can + * compile the program, run it, and it will produce a "jconfig.h" file for + * your system. + * + * As a general rule, each time you try to compile this program, + * pay attention only to the *first* error message you get from the compiler. + * Many C compilers will issue lots of spurious error messages once they + * have gotten confused. Go to the line indicated in the first error message, + * and read the comments preceding that line to see what to change. + * + * Almost all of the edits you may need to make to this program consist of + * changing a line that reads "#define SOME_SYMBOL" to "#undef SOME_SYMBOL", + * or vice versa. This is called defining or undefining that symbol. + */ + + +/* First we must see if your system has the include files we need. + * We start out with the assumption that your system has all the ANSI-standard + * include files. If you get any error trying to include one of these files, + * undefine the corresponding HAVE_xxx symbol. + */ + +#define HAVE_STDDEF_H /* replace 'define' by 'undef' if error here */ +#ifdef HAVE_STDDEF_H /* next line will be skipped if you undef... */ +#include +#endif + +#define HAVE_STDLIB_H /* same thing for stdlib.h */ +#ifdef HAVE_STDLIB_H +#include +#endif + +#include /* If you ain't got this, you ain't got C. */ + +/* We have to see if your string functions are defined by + * strings.h (old BSD convention) or string.h (everybody else). + * We try the non-BSD convention first; define NEED_BSD_STRINGS + * if the compiler says it can't find string.h. + */ + +#undef NEED_BSD_STRINGS + +#ifdef NEED_BSD_STRINGS +#include +#else +#include +#endif + +/* On some systems (especially older Unix machines), type size_t is + * defined only in the include file . If you get a failure + * on the size_t test below, try defining NEED_SYS_TYPES_H. + */ + +#undef NEED_SYS_TYPES_H /* start by assuming we don't need it */ +#ifdef NEED_SYS_TYPES_H +#include +#endif + + +/* Usually type size_t is defined in one of the include files we've included + * above. If not, you'll get an error on the "typedef size_t my_size_t;" line. + * In that case, first try defining NEED_SYS_TYPES_H just above. + * If that doesn't work, you'll have to search through your system library + * to figure out which include file defines "size_t". Look for a line that + * says "typedef something-or-other size_t;". Then, change the line below + * that says "#include " to instead include the file + * you found size_t in, and define NEED_SPECIAL_INCLUDE. If you can't find + * type size_t anywhere, try replacing "#include " with + * "typedef unsigned int size_t;". + */ + +#undef NEED_SPECIAL_INCLUDE /* assume we DON'T need it, for starters */ + +#ifdef NEED_SPECIAL_INCLUDE +#include +#endif + +typedef size_t my_size_t; /* The payoff: do we have size_t now? */ + + +/* The next question is whether your compiler supports ANSI-style function + * prototypes. You need to know this in order to choose between using + * makefile.ansi and using makefile.unix. + * The #define line below is set to assume you have ANSI function prototypes. + * If you get an error in this group of lines, undefine HAVE_PROTOTYPES. + */ + +#define HAVE_PROTOTYPES + +#ifdef HAVE_PROTOTYPES +int testfunction (int arg1, int * arg2); /* check prototypes */ + +struct methods_struct { /* check method-pointer declarations */ + int (*error_exit) (char *msgtext); + int (*trace_message) (char *msgtext); + int (*another_method) (void); +}; + +int testfunction (int arg1, int * arg2) /* check definitions */ +{ + return arg2[arg1]; +} + +int test2function (void) /* check void arg list */ +{ + return 0; +} +#endif + + +/* Now we want to find out if your compiler knows what "unsigned char" means. + * If you get an error on the "unsigned char un_char;" line, + * then undefine HAVE_UNSIGNED_CHAR. + */ + +#define HAVE_UNSIGNED_CHAR + +#ifdef HAVE_UNSIGNED_CHAR +unsigned char un_char; +#endif + + +/* Now we want to find out if your compiler knows what "unsigned short" means. + * If you get an error on the "unsigned short un_short;" line, + * then undefine HAVE_UNSIGNED_SHORT. + */ + +#define HAVE_UNSIGNED_SHORT + +#ifdef HAVE_UNSIGNED_SHORT +unsigned short un_short; +#endif + + +/* Now we want to find out if your compiler understands type "void". + * If you get an error anywhere in here, undefine HAVE_VOID. + */ + +#define HAVE_VOID + +#ifdef HAVE_VOID +/* Caution: a C++ compiler will insist on complete prototypes */ +typedef void * void_ptr; /* check void * */ +#ifdef HAVE_PROTOTYPES /* check ptr to function returning void */ +typedef void (*void_func) (int a, int b); +#else +typedef void (*void_func) (); +#endif + +#ifdef HAVE_PROTOTYPES /* check void function result */ +void test3function (void_ptr arg1, void_func arg2) +#else +void test3function (arg1, arg2) + void_ptr arg1; + void_func arg2; +#endif +{ + char * locptr = (char *) arg1; /* check casting to and from void * */ + arg1 = (void *) locptr; + (*arg2) (1, 2); /* check call of fcn returning void */ +} +#endif + + +/* Now we want to find out if your compiler knows what "const" means. + * If you get an error here, undefine HAVE_CONST. + */ + +#define HAVE_CONST + +#ifdef HAVE_CONST +static const int carray[3] = {1, 2, 3}; + +#ifdef HAVE_PROTOTYPES +int test4function (const int arg1) +#else +int test4function (arg1) + const int arg1; +#endif +{ + return carray[arg1]; +} +#endif + + +/* If you get an error or warning about this structure definition, + * define INCOMPLETE_TYPES_BROKEN. + */ + +#undef INCOMPLETE_TYPES_BROKEN + +#ifndef INCOMPLETE_TYPES_BROKEN +typedef struct undefined_structure * undef_struct_ptr; +#endif + + +/* If you get an error about duplicate names, + * define NEED_SHORT_EXTERNAL_NAMES. + */ + +#undef NEED_SHORT_EXTERNAL_NAMES + +#ifndef NEED_SHORT_EXTERNAL_NAMES + +int possibly_duplicate_function () +{ + return 0; +} + +int possibly_dupli_function () +{ + return 1; +} + +#endif + + + +/************************************************************************ + * OK, that's it. You should not have to change anything beyond this + * point in order to compile and execute this program. (You might get + * some warnings, but you can ignore them.) + * When you run the program, it will make a couple more tests that it + * can do automatically, and then it will create jconfig.h and print out + * any additional suggestions it has. + ************************************************************************ + */ + + +#ifdef HAVE_PROTOTYPES +int is_char_signed (int arg) +#else +int is_char_signed (arg) + int arg; +#endif +{ + if (arg == 189) { /* expected result for unsigned char */ + return 0; /* type char is unsigned */ + } + else if (arg != -67) { /* expected result for signed char */ + printf("Hmm, it seems 'char' is not eight bits wide on your machine.\n"); + printf("I fear the JPEG software will not work at all.\n\n"); + } + return 1; /* assume char is signed otherwise */ +} + + +#ifdef HAVE_PROTOTYPES +int is_shifting_signed (long arg) +#else +int is_shifting_signed (arg) + long arg; +#endif +/* See whether right-shift on a long is signed or not. */ +{ + long res = arg >> 4; + + if (res == -0x7F7E80CL) { /* expected result for signed shift */ + return 1; /* right shift is signed */ + } + /* see if unsigned-shift hack will fix it. */ + /* we can't just test exact value since it depends on width of long... */ + res |= (~0L) << (32-4); + if (res == -0x7F7E80CL) { /* expected result now? */ + return 0; /* right shift is unsigned */ + } + printf("Right shift isn't acting as I expect it to.\n"); + printf("I fear the JPEG software will not work at all.\n\n"); + return 0; /* try it with unsigned anyway */ +} + + +#ifdef HAVE_PROTOTYPES +int main (int argc, char ** argv) +#else +int main (argc, argv) + int argc; + char ** argv; +#endif +{ + char signed_char_check = (char) (-67); + FILE *outfile; + + /* Attempt to write jconfig.h */ + if ((outfile = fopen("jconfig.h", "w")) == NULL) { + printf("Failed to write jconfig.h\n"); + return 1; + } + + /* Write out all the info */ + fprintf(outfile, "/* jconfig.h --- generated by ckconfig.c */\n"); + fprintf(outfile, "/* see jconfig.txt for explanations */\n\n"); +#ifdef HAVE_PROTOTYPES + fprintf(outfile, "#define HAVE_PROTOTYPES\n"); +#else + fprintf(outfile, "#undef HAVE_PROTOTYPES\n"); +#endif +#ifdef HAVE_UNSIGNED_CHAR + fprintf(outfile, "#define HAVE_UNSIGNED_CHAR\n"); +#else + fprintf(outfile, "#undef HAVE_UNSIGNED_CHAR\n"); +#endif +#ifdef HAVE_UNSIGNED_SHORT + fprintf(outfile, "#define HAVE_UNSIGNED_SHORT\n"); +#else + fprintf(outfile, "#undef HAVE_UNSIGNED_SHORT\n"); +#endif +#ifdef HAVE_VOID + fprintf(outfile, "/* #define void char */\n"); +#else + fprintf(outfile, "#define void char\n"); +#endif +#ifdef HAVE_CONST + fprintf(outfile, "/* #define const */\n"); +#else + fprintf(outfile, "#define const\n"); +#endif + if (is_char_signed((int) signed_char_check)) + fprintf(outfile, "#undef CHAR_IS_UNSIGNED\n"); + else + fprintf(outfile, "#define CHAR_IS_UNSIGNED\n"); +#ifdef HAVE_STDDEF_H + fprintf(outfile, "#define HAVE_STDDEF_H\n"); +#else + fprintf(outfile, "#undef HAVE_STDDEF_H\n"); +#endif +#ifdef HAVE_STDLIB_H + fprintf(outfile, "#define HAVE_STDLIB_H\n"); +#else + fprintf(outfile, "#undef HAVE_STDLIB_H\n"); +#endif +#ifdef NEED_BSD_STRINGS + fprintf(outfile, "#define NEED_BSD_STRINGS\n"); +#else + fprintf(outfile, "#undef NEED_BSD_STRINGS\n"); +#endif +#ifdef NEED_SYS_TYPES_H + fprintf(outfile, "#define NEED_SYS_TYPES_H\n"); +#else + fprintf(outfile, "#undef NEED_SYS_TYPES_H\n"); +#endif + fprintf(outfile, "#undef NEED_FAR_POINTERS\n"); +#ifdef NEED_SHORT_EXTERNAL_NAMES + fprintf(outfile, "#define NEED_SHORT_EXTERNAL_NAMES\n"); +#else + fprintf(outfile, "#undef NEED_SHORT_EXTERNAL_NAMES\n"); +#endif +#ifdef INCOMPLETE_TYPES_BROKEN + fprintf(outfile, "#define INCOMPLETE_TYPES_BROKEN\n"); +#else + fprintf(outfile, "#undef INCOMPLETE_TYPES_BROKEN\n"); +#endif + fprintf(outfile, "\n#ifdef JPEG_INTERNALS\n\n"); + if (is_shifting_signed(-0x7F7E80B1L)) + fprintf(outfile, "#undef RIGHT_SHIFT_IS_UNSIGNED\n"); + else + fprintf(outfile, "#define RIGHT_SHIFT_IS_UNSIGNED\n"); + fprintf(outfile, "\n#endif /* JPEG_INTERNALS */\n"); + fprintf(outfile, "\n#ifdef JPEG_CJPEG_DJPEG\n\n"); + fprintf(outfile, "#define BMP_SUPPORTED /* BMP image file format */\n"); + fprintf(outfile, "#define GIF_SUPPORTED /* GIF image file format */\n"); + fprintf(outfile, "#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */\n"); + fprintf(outfile, "#undef RLE_SUPPORTED /* Utah RLE image file format */\n"); + fprintf(outfile, "#define TARGA_SUPPORTED /* Targa image file format */\n\n"); + fprintf(outfile, "#undef TWO_FILE_COMMANDLINE /* You may need this on non-Unix systems */\n"); + fprintf(outfile, "#undef NEED_SIGNAL_CATCHER /* Define this if you use jmemname.c */\n"); + fprintf(outfile, "#undef DONT_USE_B_MODE\n"); + fprintf(outfile, "/* #define PROGRESS_REPORT */ /* optional */\n"); + fprintf(outfile, "\n#endif /* JPEG_CJPEG_DJPEG */\n"); + + /* Close the jconfig.h file */ + fclose(outfile); + + /* User report */ + printf("Configuration check for Independent JPEG Group's software done.\n"); + printf("\nI have written the jconfig.h file for you.\n\n"); +#ifdef HAVE_PROTOTYPES + printf("You should use makefile.ansi as the starting point for your Makefile.\n"); +#else + printf("You should use makefile.unix as the starting point for your Makefile.\n"); +#endif + +#ifdef NEED_SPECIAL_INCLUDE + printf("\nYou'll need to change jconfig.h to include the system include file\n"); + printf("that you found type size_t in, or add a direct definition of type\n"); + printf("size_t if that's what you used. Just add it to the end.\n"); +#endif + + return 0; +} diff --git a/compat/libjpeg/coderules.txt b/compat/libjpeg/coderules.txt new file mode 100755 index 0000000..382efad --- /dev/null +++ b/compat/libjpeg/coderules.txt @@ -0,0 +1,118 @@ +IJG JPEG LIBRARY: CODING RULES + +Copyright (C) 1991-1996, Thomas G. Lane. +This file is part of the Independent JPEG Group's software. +For conditions of distribution and use, see the accompanying README file. + + +Since numerous people will be contributing code and bug fixes, it's important +to establish a common coding style. The goal of using similar coding styles +is much more important than the details of just what that style is. + +In general we follow the recommendations of "Recommended C Style and Coding +Standards" revision 6.1 (Cannon et al. as modified by Spencer, Keppel and +Brader). This document is available in the IJG FTP archive (see +jpeg/doc/cstyle.ms.tbl.Z, or cstyle.txt.Z for those without nroff/tbl). + +Block comments should be laid out thusly: + +/* + * Block comments in this style. + */ + +We indent statements in K&R style, e.g., + if (test) { + then-part; + } else { + else-part; + } +with two spaces per indentation level. (This indentation convention is +handled automatically by GNU Emacs and many other text editors.) + +Multi-word names should be written in lower case with underscores, e.g., +multi_word_name (not multiWordName). Preprocessor symbols and enum constants +are similar but upper case (MULTI_WORD_NAME). Names should be unique within +the first fifteen characters. (On some older systems, global names must be +unique within six characters. We accommodate this without cluttering the +source code by using macros to substitute shorter names.) + +We use function prototypes everywhere; we rely on automatic source code +transformation to feed prototype-less C compilers. Transformation is done +by the simple and portable tool 'ansi2knr.c' (courtesy of Ghostscript). +ansi2knr is not very bright, so it imposes a format requirement on function +declarations: the function name MUST BEGIN IN COLUMN 1. Thus all functions +should be written in the following style: + +LOCAL(int *) +function_name (int a, char *b) +{ + code... +} + +Note that each function definition must begin with GLOBAL(type), LOCAL(type), +or METHODDEF(type). These macros expand to "static type" or just "type" as +appropriate. They provide a readable indication of the routine's usage and +can readily be changed for special needs. (For instance, special linkage +keywords can be inserted for use in Windows DLLs.) + +ansi2knr does not transform method declarations (function pointers in +structs). We handle these with a macro JMETHOD, defined as + #ifdef HAVE_PROTOTYPES + #define JMETHOD(type,methodname,arglist) type (*methodname) arglist + #else + #define JMETHOD(type,methodname,arglist) type (*methodname) () + #endif +which is used like this: + struct function_pointers { + JMETHOD(void, init_entropy_encoder, (int somearg, jparms *jp)); + JMETHOD(void, term_entropy_encoder, (void)); + }; +Note the set of parentheses surrounding the parameter list. + +A similar solution is used for forward and external function declarations +(see the EXTERN and JPP macros). + +If the code is to work on non-ANSI compilers, we cannot rely on a prototype +declaration to coerce actual parameters into the right types. Therefore, use +explicit casts on actual parameters whenever the actual parameter type is not +identical to the formal parameter. Beware of implicit conversions to "int". + +It seems there are some non-ANSI compilers in which the sizeof() operator +is defined to return int, yet size_t is defined as long. Needless to say, +this is brain-damaged. Always use the SIZEOF() macro in place of sizeof(), +so that the result is guaranteed to be of type size_t. + + +The JPEG library is intended to be used within larger programs. Furthermore, +we want it to be reentrant so that it can be used by applications that process +multiple images concurrently. The following rules support these requirements: + +1. Avoid direct use of file I/O, "malloc", error report printouts, etc; +pass these through the common routines provided. + +2. Minimize global namespace pollution. Functions should be declared static +wherever possible. (Note that our method-based calling conventions help this +a lot: in many modules only the initialization function will ever need to be +called directly, so only that function need be externally visible.) All +global function names should begin with "jpeg_", and should have an +abbreviated name (unique in the first six characters) substituted by macro +when NEED_SHORT_EXTERNAL_NAMES is set. + +3. Don't use global variables; anything that must be used in another module +should be in the common data structures. + +4. Don't use static variables except for read-only constant tables. Variables +that should be private to a module can be placed into private structures (see +the system architecture document, structure.txt). + +5. Source file names should begin with "j" for files that are part of the +library proper; source files that are not part of the library, such as cjpeg.c +and djpeg.c, do not begin with "j". Keep source file names to eight +characters (plus ".c" or ".h", etc) to make life easy for MS-DOSers. Keep +compression and decompression code in separate source files --- some +applications may want only one half of the library. + +Note: these rules (particularly #4) are not followed religiously in the +modules that are used in cjpeg/djpeg but are not part of the JPEG library +proper. Those modules are not really intended to be used in other +applications. diff --git a/compat/libjpeg/compile b/compat/libjpeg/compile new file mode 100755 index 0000000..a85b723 --- /dev/null +++ b/compat/libjpeg/compile @@ -0,0 +1,347 @@ +#! /bin/sh +# Wrapper for compilers which do not understand '-c -o'. + +scriptversion=2012-10-14.11; # UTC + +# Copyright (C) 1999-2014 Free Software Foundation, Inc. +# Written by Tom Tromey . +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to or send patches to +# . + +nl=' +' + +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent tools from complaining about whitespace usage. +IFS=" "" $nl" + +file_conv= + +# func_file_conv build_file lazy +# Convert a $build file to $host form and store it in $file +# Currently only supports Windows hosts. If the determined conversion +# type is listed in (the comma separated) LAZY, no conversion will +# take place. +func_file_conv () +{ + file=$1 + case $file in + / | /[!/]*) # absolute file, and not a UNC file + if test -z "$file_conv"; then + # lazily determine how to convert abs files + case `uname -s` in + MINGW*) + file_conv=mingw + ;; + CYGWIN*) + file_conv=cygwin + ;; + *) + file_conv=wine + ;; + esac + fi + case $file_conv/,$2, in + *,$file_conv,*) + ;; + mingw/*) + file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` + ;; + cygwin/*) + file=`cygpath -m "$file" || echo "$file"` + ;; + wine/*) + file=`winepath -w "$file" || echo "$file"` + ;; + esac + ;; + esac +} + +# func_cl_dashL linkdir +# Make cl look for libraries in LINKDIR +func_cl_dashL () +{ + func_file_conv "$1" + if test -z "$lib_path"; then + lib_path=$file + else + lib_path="$lib_path;$file" + fi + linker_opts="$linker_opts -LIBPATH:$file" +} + +# func_cl_dashl library +# Do a library search-path lookup for cl +func_cl_dashl () +{ + lib=$1 + found=no + save_IFS=$IFS + IFS=';' + for dir in $lib_path $LIB + do + IFS=$save_IFS + if $shared && test -f "$dir/$lib.dll.lib"; then + found=yes + lib=$dir/$lib.dll.lib + break + fi + if test -f "$dir/$lib.lib"; then + found=yes + lib=$dir/$lib.lib + break + fi + if test -f "$dir/lib$lib.a"; then + found=yes + lib=$dir/lib$lib.a + break + fi + done + IFS=$save_IFS + + if test "$found" != yes; then + lib=$lib.lib + fi +} + +# func_cl_wrapper cl arg... +# Adjust compile command to suit cl +func_cl_wrapper () +{ + # Assume a capable shell + lib_path= + shared=: + linker_opts= + for arg + do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + eat=1 + case $2 in + *.o | *.[oO][bB][jJ]) + func_file_conv "$2" + set x "$@" -Fo"$file" + shift + ;; + *) + func_file_conv "$2" + set x "$@" -Fe"$file" + shift + ;; + esac + ;; + -I) + eat=1 + func_file_conv "$2" mingw + set x "$@" -I"$file" + shift + ;; + -I*) + func_file_conv "${1#-I}" mingw + set x "$@" -I"$file" + shift + ;; + -l) + eat=1 + func_cl_dashl "$2" + set x "$@" "$lib" + shift + ;; + -l*) + func_cl_dashl "${1#-l}" + set x "$@" "$lib" + shift + ;; + -L) + eat=1 + func_cl_dashL "$2" + ;; + -L*) + func_cl_dashL "${1#-L}" + ;; + -static) + shared=false + ;; + -Wl,*) + arg=${1#-Wl,} + save_ifs="$IFS"; IFS=',' + for flag in $arg; do + IFS="$save_ifs" + linker_opts="$linker_opts $flag" + done + IFS="$save_ifs" + ;; + -Xlinker) + eat=1 + linker_opts="$linker_opts $2" + ;; + -*) + set x "$@" "$1" + shift + ;; + *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) + func_file_conv "$1" + set x "$@" -Tp"$file" + shift + ;; + *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) + func_file_conv "$1" mingw + set x "$@" "$file" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift + done + if test -n "$linker_opts"; then + linker_opts="-link$linker_opts" + fi + exec "$@" $linker_opts + exit 1 +} + +eat= + +case $1 in + '') + echo "$0: No command. Try '$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: compile [--help] [--version] PROGRAM [ARGS] + +Wrapper for compilers which do not understand '-c -o'. +Remove '-o dest.o' from ARGS, run PROGRAM with the remaining +arguments, and rename the output as expected. + +If you are trying to build a whole package this is not the +right script to run: please start by reading the file 'INSTALL'. + +Report bugs to . +EOF + exit $? + ;; + -v | --v*) + echo "compile $scriptversion" + exit $? + ;; + cl | *[/\\]cl | cl.exe | *[/\\]cl.exe ) + func_cl_wrapper "$@" # Doesn't return... + ;; +esac + +ofile= +cfile= + +for arg +do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + # So we strip '-o arg' only if arg is an object. + eat=1 + case $2 in + *.o | *.obj) + ofile=$2 + ;; + *) + set x "$@" -o "$2" + shift + ;; + esac + ;; + *.c) + cfile=$1 + set x "$@" "$1" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift +done + +if test -z "$ofile" || test -z "$cfile"; then + # If no '-o' option was seen then we might have been invoked from a + # pattern rule where we don't need one. That is ok -- this is a + # normal compilation that the losing compiler can handle. If no + # '.c' file was seen then we are probably linking. That is also + # ok. + exec "$@" +fi + +# Name of file we expect compiler to create. +cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` + +# Create the lock directory. +# Note: use '[/\\:.-]' here to ensure that we don't use the same name +# that we are using for the .o file. Also, base the name on the expected +# object file name, since that is what matters with a parallel build. +lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d +while true; do + if mkdir "$lockdir" >/dev/null 2>&1; then + break + fi + sleep 1 +done +# FIXME: race condition here if user kills between mkdir and trap. +trap "rmdir '$lockdir'; exit 1" 1 2 15 + +# Run the compile. +"$@" +ret=$? + +if test -f "$cofile"; then + test "$cofile" = "$ofile" || mv "$cofile" "$ofile" +elif test -f "${cofile}bj"; then + test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" +fi + +rmdir "$lockdir" +exit $ret + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/compat/libjpeg/config.guess b/compat/libjpeg/config.guess new file mode 100755 index 0000000..6c32c86 --- /dev/null +++ b/compat/libjpeg/config.guess @@ -0,0 +1,1421 @@ +#! /bin/sh +# Attempt to guess a canonical system name. +# Copyright 1992-2014 Free Software Foundation, Inc. + +timestamp='2014-11-04' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, see . +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that +# program. This Exception is an additional permission under section 7 +# of the GNU General Public License, version 3 ("GPLv3"). +# +# Originally written by Per Bothner; maintained since 2000 by Ben Elliston. +# +# You can get the latest version of this script from: +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD +# +# Please send patches to . + + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system \`$me' is run on. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright 1992-2014 Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 +fi + +trap 'exit 1' 1 2 15 + +# CC_FOR_BUILD -- compiler used by this script. Note that the use of a +# compiler to aid in system detection is discouraged as it requires +# temporary files to be created and, as you can see below, it is a +# headache to deal with in a portable fashion. + +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. + +# Portable tmp directory creation inspired by the Autoconf team. + +set_cc_for_build=' +trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; +trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; +: ${TMPDIR=/tmp} ; + { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || + { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || + { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; +dummy=$tmp/dummy ; +tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; +case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int x;" > $dummy.c ; + for c in cc gcc c89 c99 ; do + if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then + CC_FOR_BUILD="$c"; break ; + fi ; + done ; + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found ; + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; +esac ; set_cc_for_build= ;' + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# (ghazi@noc.rutgers.edu 1994-08-24) +if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH +fi + +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +case "${UNAME_SYSTEM}" in +Linux|GNU|GNU/*) + # If the system lacks a compiler, then just pick glibc. + # We could probably try harder. + LIBC=gnu + + eval $set_cc_for_build + cat <<-EOF > $dummy.c + #include + #if defined(__UCLIBC__) + LIBC=uclibc + #elif defined(__dietlibc__) + LIBC=dietlibc + #else + LIBC=gnu + #endif + EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC' | sed 's, ,,g'` + ;; +esac + +# Note: order is significant - the case branches are not exclusive. + +case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + *:NetBSD:*:*) + # NetBSD (nbsd) targets should (where applicable) match one or + # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # + # Note: NetBSD doesn't particularly care about the vendor + # portion of the name. We always set it to "unknown". + sysctl="sysctl -n hw.machine_arch" + UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ + /usr/sbin/$sysctl 2>/dev/null || echo unknown)` + case "${UNAME_MACHINE_ARCH}" in + armeb) machine=armeb-unknown ;; + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; + sh5el) machine=sh5le-unknown ;; + *) machine=${UNAME_MACHINE_ARCH}-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently, or will in the future. + case "${UNAME_MACHINE_ARCH}" in + arm*|i386|m68k|ns32k|sh3*|sparc|vax) + eval $set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ELF__ + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # The OS release + # Debian GNU/NetBSD machines have a different userland, and + # thus, need a distinct triplet. However, they do not need + # kernel version information, so it can be replaced with a + # suitable tag, in the style of linux-gnu. + case "${UNAME_VERSION}" in + Debian*) + release='-gnu' + ;; + *) + release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + ;; + esac + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}" + exit ;; + *:Bitrig:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE} + exit ;; + *:OpenBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} + exit ;; + *:ekkoBSD:*:*) + echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} + exit ;; + *:SolidBSD:*:*) + echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} + exit ;; + macppc:MirBSD:*:*) + echo powerpc-unknown-mirbsd${UNAME_RELEASE} + exit ;; + *:MirBSD:*:*) + echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} + exit ;; + alpha:OSF1:*:*) + case $UNAME_RELEASE in + *4.0) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + ;; + *5.*) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` + ;; + esac + # According to Compaq, /usr/sbin/psrinfo has been available on + # OSF/1 and Tru64 systems produced since 1995. I hope that + # covers most systems running today. This code pipes the CPU + # types through head -n 1, so we only detect the type of CPU 0. + ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` + case "$ALPHA_CPU_TYPE" in + "EV4 (21064)") + UNAME_MACHINE="alpha" ;; + "EV4.5 (21064)") + UNAME_MACHINE="alpha" ;; + "LCA4 (21066/21068)") + UNAME_MACHINE="alpha" ;; + "EV5 (21164)") + UNAME_MACHINE="alphaev5" ;; + "EV5.6 (21164A)") + UNAME_MACHINE="alphaev56" ;; + "EV5.6 (21164PC)") + UNAME_MACHINE="alphapca56" ;; + "EV5.7 (21164PC)") + UNAME_MACHINE="alphapca57" ;; + "EV6 (21264)") + UNAME_MACHINE="alphaev6" ;; + "EV6.7 (21264A)") + UNAME_MACHINE="alphaev67" ;; + "EV6.8CB (21264C)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8AL (21264B)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8CX (21264D)") + UNAME_MACHINE="alphaev68" ;; + "EV6.9A (21264/EV69A)") + UNAME_MACHINE="alphaev69" ;; + "EV7 (21364)") + UNAME_MACHINE="alphaev7" ;; + "EV7.9 (21364A)") + UNAME_MACHINE="alphaev79" ;; + esac + # A Pn.n version is a patched version. + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + # Reset EXIT trap before exiting to avoid spurious non-zero exit code. + exitcode=$? + trap '' 0 + exit $exitcode ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix + exit ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 + exit ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 + exit ;; + *:[Aa]miga[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-amigaos + exit ;; + *:[Mm]orph[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-morphos + exit ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit ;; + *:z/VM:*:*) + echo s390-ibm-zvmoe + exit ;; + *:OS400:*:*) + echo powerpc-ibm-os400 + exit ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} + exit ;; + arm*:riscos:*:*|arm*:RISCOS:*:*) + echo arm-unknown-riscos + exit ;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit ;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit ;; + DRS?6000:unix:4.0:6*) + echo sparc-icl-nx6 + exit ;; + DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) + case `/usr/bin/uname -p` in + sparc) echo sparc-icl-nx7; exit ;; + esac ;; + s390x:SunOS:*:*) + echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) + echo i386-pc-auroraux${UNAME_RELEASE} + exit ;; + i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) + eval $set_cc_for_build + SUN_ARCH="i386" + # If there is a compiler, see if it is configured for 64-bit objects. + # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. + # This test works for both compilers. + if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + SUN_ARCH="x86_64" + fi + fi + echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` + exit ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} + exit ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos${UNAME_RELEASE} + ;; + sun4) + echo sparc-sun-sunos${UNAME_RELEASE} + ;; + esac + exit ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} + exit ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} + exit ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} + exit ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} + exit ;; + m68k:machten:*:*) + echo m68k-apple-machten${UNAME_RELEASE} + exit ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} + exit ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} + exit ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} + exit ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix${UNAME_RELEASE} + exit ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c +#ifdef __cplusplus +#include /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && + dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && + SYSTEM_NAME=`$dummy $dummyarg` && + { echo "$SYSTEM_NAME"; exit; } + echo mips-mips-riscos${UNAME_RELEASE} + exit ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit ;; + Motorola:*:4.3:PL8-*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] + then + if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ + [ ${TARGET_BINARY_INTERFACE}x = x ] + then + echo m88k-dg-dgux${UNAME_RELEASE} + else + echo m88k-dg-dguxbcs${UNAME_RELEASE} + fi + else + echo i586-dg-dgux${UNAME_RELEASE} + fi + exit ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` + exit ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix + exit ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} + exit ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` + then + echo "$SYSTEM_NAME" + else + echo rs6000-ibm-aix3.2.5 + fi + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit ;; + *:AIX:*:[4567]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` + if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/lslpp ] ; then + IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc | + awk -F: '{ print $3 }' | sed s/[0-9]*$/0/` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} + exit ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 + exit ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to + exit ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + case "${UNAME_MACHINE}" in + 9000/31? ) HP_ARCH=m68000 ;; + 9000/[34]?? ) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 + 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH="hppa2.0n" ;; + 64) HP_ARCH="hppa2.0w" ;; + '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 + esac ;; + esac + fi + if [ "${HP_ARCH}" = "" ]; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + + #define _HPUX_SOURCE + #include + #include + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` + test -z "$HP_ARCH" && HP_ARCH=hppa + fi ;; + esac + if [ ${HP_ARCH} = "hppa2.0w" ] + then + eval $set_cc_for_build + + # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating + # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler + # generating 64-bit code. GNU and HP use different nomenclature: + # + # $ CC_FOR_BUILD=cc ./config.guess + # => hppa2.0w-hp-hpux11.23 + # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess + # => hppa64-hp-hpux11.23 + + if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | + grep -q __LP64__ + then + HP_ARCH="hppa2.0w" + else + HP_ARCH="hppa64" + fi + fi + echo ${HP_ARCH}-hp-hpux${HPUX_REV} + exit ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux${HPUX_REV} + exit ;; + 3050*:HI-UX:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + echo unknown-hitachi-hiuxwe2 + exit ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd + exit ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf + exit ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-unknown-osf1mk + else + echo ${UNAME_MACHINE}-unknown-osf1 + fi + exit ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + *:UNICOS/mp:*:*) + echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + 5000:UNIX_System_V:4.*:*) + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` + echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + exit ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:FreeBSD:*:*) + UNAME_PROCESSOR=`/usr/bin/uname -p` + case ${UNAME_PROCESSOR} in + amd64) + echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + *) + echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + esac + exit ;; + i*:CYGWIN*:*) + echo ${UNAME_MACHINE}-pc-cygwin + exit ;; + *:MINGW64*:*) + echo ${UNAME_MACHINE}-pc-mingw64 + exit ;; + *:MINGW*:*) + echo ${UNAME_MACHINE}-pc-mingw32 + exit ;; + *:MSYS*:*) + echo ${UNAME_MACHINE}-pc-msys + exit ;; + i*:windows32*:*) + # uname -m includes "-pc" on this system. + echo ${UNAME_MACHINE}-mingw32 + exit ;; + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 + exit ;; + *:Interix*:*) + case ${UNAME_MACHINE} in + x86) + echo i586-pc-interix${UNAME_RELEASE} + exit ;; + authenticamd | genuineintel | EM64T) + echo x86_64-unknown-interix${UNAME_RELEASE} + exit ;; + IA64) + echo ia64-unknown-interix${UNAME_RELEASE} + exit ;; + esac ;; + [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) + echo i${UNAME_MACHINE}-pc-mks + exit ;; + 8664:Windows_NT:*) + echo x86_64-pc-mks + exit ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? + echo i586-pc-interix + exit ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin + exit ;; + amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) + echo x86_64-unknown-cygwin + exit ;; + p*:CYGWIN*:*) + echo powerpcle-unknown-cygwin + exit ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + *:GNU:*:*) + # the GNU system + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-${LIBC}`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` + exit ;; + *:GNU/*:*:*) + # other systems with GNU libc and userland + echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC} + exit ;; + i*86:Minix:*:*) + echo ${UNAME_MACHINE}-pc-minix + exit ;; + aarch64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + aarch64_be:Linux:*:*) + UNAME_MACHINE=aarch64_be + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep -q ld.so.1 + if test "$?" = 0 ; then LIBC="gnulibc1" ; fi + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + arc:Linux:*:* | arceb:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + arm*:Linux:*:*) + eval $set_cc_for_build + if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_EABI__ + then + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + else + if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_PCS_VFP + then + echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi + else + echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabihf + fi + fi + exit ;; + avr32*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + cris:Linux:*:*) + echo ${UNAME_MACHINE}-axis-linux-${LIBC} + exit ;; + crisv32:Linux:*:*) + echo ${UNAME_MACHINE}-axis-linux-${LIBC} + exit ;; + frv:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + hexagon:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + i*86:Linux:*:*) + echo ${UNAME_MACHINE}-pc-linux-${LIBC} + exit ;; + ia64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + m32r*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + m68*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + mips:Linux:*:* | mips64:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef ${UNAME_MACHINE} + #undef ${UNAME_MACHINE}el + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=${UNAME_MACHINE}el + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=${UNAME_MACHINE} + #else + CPU= + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; } + ;; + openrisc*:Linux:*:*) + echo or1k-unknown-linux-${LIBC} + exit ;; + or32:Linux:*:* | or1k*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + padre:Linux:*:*) + echo sparc-unknown-linux-${LIBC} + exit ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-${LIBC} + exit ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-${LIBC} ;; + PA8*) echo hppa2.0-unknown-linux-${LIBC} ;; + *) echo hppa-unknown-linux-${LIBC} ;; + esac + exit ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-${LIBC} + exit ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-${LIBC} + exit ;; + ppc64le:Linux:*:*) + echo powerpc64le-unknown-linux-${LIBC} + exit ;; + ppcle:Linux:*:*) + echo powerpcle-unknown-linux-${LIBC} + exit ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo ${UNAME_MACHINE}-ibm-linux-${LIBC} + exit ;; + sh64*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + sh*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + tile*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + vax:Linux:*:*) + echo ${UNAME_MACHINE}-dec-linux-${LIBC} + exit ;; + x86_64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + xtensa*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + echo i386-sequent-sysv4 + exit ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} + exit ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx + exit ;; + i*86:XTS-300:*:STOP) + echo ${UNAME_MACHINE}-unknown-stop + exit ;; + i*86:atheos:*:*) + echo ${UNAME_MACHINE}-unknown-atheos + exit ;; + i*86:syllable:*:*) + echo ${UNAME_MACHINE}-pc-syllable + exit ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) + echo i386-unknown-lynxos${UNAME_RELEASE} + exit ;; + i*86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp + exit ;; + i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi + exit ;; + i*86:*:5:[678]*) + # UnixWare 7.x, OpenUNIX and OpenServer 6. + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} + exit ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` + (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + else + echo ${UNAME_MACHINE}-pc-sysv32 + fi + exit ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i586. + # Note: whatever this is, it MUST be the same as what config.sub + # prints for the "djgpp" host, or else GDB configury will decide that + # this is a cross-build. + echo i586-pc-msdosdjgpp + exit ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi + exit ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit ;; + mc68k:UNIX:SYSTEM5:3.51m) + echo m68k-convergent-sysv + exit ;; + M680?0:D-NIX:5.3:*) + echo m68k-diab-dnix + exit ;; + M68*:*:R3V[5678]*:*) + test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; + 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4; exit; } ;; + NCR*:*:4.2:* | MPRAS*:*:4.2:*) + OS_REL='.3' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} + exit ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} + exit ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} + exit ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) + echo powerpc-unknown-lynxos${UNAME_RELEASE} + exit ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} + exit ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo ${UNAME_MACHINE}-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says + echo i586-unisys-sysv4 + exit ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes . + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 + exit ;; + i*86:VOS:*:*) + # From Paul.Green@stratus.com. + echo ${UNAME_MACHINE}-stratus-vos + exit ;; + *:VOS:*:*) + # From Paul.Green@stratus.com. + echo hppa1.1-stratus-vos + exit ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} + exit ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 + exit ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi + exit ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit ;; + BePC:Haiku:*:*) # Haiku running on Intel PC compatible. + echo i586-pc-haiku + exit ;; + x86_64:Haiku:*:*) + echo x86_64-unknown-haiku + exit ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} + exit ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} + exit ;; + SX-6:SUPER-UX:*:*) + echo sx6-nec-superux${UNAME_RELEASE} + exit ;; + SX-7:SUPER-UX:*:*) + echo sx7-nec-superux${UNAME_RELEASE} + exit ;; + SX-8:SUPER-UX:*:*) + echo sx8-nec-superux${UNAME_RELEASE} + exit ;; + SX-8R:SUPER-UX:*:*) + echo sx8r-nec-superux${UNAME_RELEASE} + exit ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Darwin:*:*) + UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown + eval $set_cc_for_build + if test "$UNAME_PROCESSOR" = unknown ; then + UNAME_PROCESSOR=powerpc + fi + if test `echo "$UNAME_RELEASE" | sed -e 's/\..*//'` -le 10 ; then + if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + case $UNAME_PROCESSOR in + i386) UNAME_PROCESSOR=x86_64 ;; + powerpc) UNAME_PROCESSOR=powerpc64 ;; + esac + fi + fi + elif test "$UNAME_PROCESSOR" = i386 ; then + # Avoid executing cc on OS X 10.9, as it ships with a stub + # that puts up a graphical alert prompting to install + # developer tools. Any system running Mac OS X 10.7 or + # later (Darwin 11 and later) is required to have a 64-bit + # processor. This is not true of the ARM version of Darwin + # that Apple uses in portable devices. + UNAME_PROCESSOR=x86_64 + fi + echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} + exit ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = "x86"; then + UNAME_PROCESSOR=i386 + UNAME_MACHINE=pc + fi + echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} + exit ;; + *:QNX:*:4*) + echo i386-pc-qnx + exit ;; + NEO-?:NONSTOP_KERNEL:*:*) + echo neo-tandem-nsk${UNAME_RELEASE} + exit ;; + NSE-*:NONSTOP_KERNEL:*:*) + echo nse-tandem-nsk${UNAME_RELEASE} + exit ;; + NSR-?:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk${UNAME_RELEASE} + exit ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit ;; + DS/*:UNIX_System_V:*:*) + echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} + exit ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + if test "$cputype" = "386"; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo ${UNAME_MACHINE}-unknown-plan9 + exit ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit ;; + *:ITS:*:*) + echo pdp10-unknown-its + exit ;; + SEI:*:*:SEIUX) + echo mips-sei-seiux${UNAME_RELEASE} + exit ;; + *:DragonFly:*:*) + echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit ;; + *:*VMS:*:*) + UNAME_MACHINE=`(uname -p) 2>/dev/null` + case "${UNAME_MACHINE}" in + A*) echo alpha-dec-vms ; exit ;; + I*) echo ia64-dec-vms ; exit ;; + V*) echo vax-dec-vms ; exit ;; + esac ;; + *:XENIX:*:SysV) + echo i386-pc-xenix + exit ;; + i*86:skyos:*:*) + echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' + exit ;; + i*86:rdos:*:*) + echo ${UNAME_MACHINE}-pc-rdos + exit ;; + i*86:AROS:*:*) + echo ${UNAME_MACHINE}-pc-aros + exit ;; + x86_64:VMkernel:*:*) + echo ${UNAME_MACHINE}-unknown-esx + exit ;; +esac + +cat >&2 < in order to provide the needed +information to handle your system. + +config.guess timestamp = $timestamp + +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = ${UNAME_MACHINE} +UNAME_RELEASE = ${UNAME_RELEASE} +UNAME_SYSTEM = ${UNAME_SYSTEM} +UNAME_VERSION = ${UNAME_VERSION} +EOF + +exit 1 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/compat/libjpeg/config.sub b/compat/libjpeg/config.sub new file mode 100755 index 0000000..7ffe373 --- /dev/null +++ b/compat/libjpeg/config.sub @@ -0,0 +1,1807 @@ +#! /bin/sh +# Configuration validation subroutine script. +# Copyright 1992-2014 Free Software Foundation, Inc. + +timestamp='2014-12-03' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, see . +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that +# program. This Exception is an additional permission under section 7 +# of the GNU General Public License, version 3 ("GPLv3"). + + +# Please send patches to . +# +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# You can get the latest version of this script from: +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS + $0 [OPTION] ALIAS + +Canonicalize a configuration name. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.sub ($timestamp) + +Copyright 1992-2014 Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo $1 + exit ;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; +esac + +# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). +# Here we must recognize all the valid KERNEL-OS combinations. +maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` +case $maybe_os in + nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \ + linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \ + knetbsd*-gnu* | netbsd*-gnu* | \ + kopensolaris*-gnu* | \ + storm-chaos* | os2-emx* | rtmk-nova*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + ;; + android-linux) + os=-linux-android + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown + ;; + *) + basic_machine=`echo $1 | sed 's/-[^-]*$//'` + if [ $basic_machine != $1 ] + then os=`echo $1 | sed 's/.*-/-/'` + else os=; fi + ;; +esac + +### Let's recognize common machines as not being operating systems so +### that things like config.sub decstation-3100 work. We also +### recognize some manufacturers as not being operating systems, so we +### can provide default operating systems below. +case $os in + -sun*os*) + # Prevent following clause from handling this invalid input. + ;; + -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ + -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ + -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ + -apple | -axis | -knuth | -cray | -microblaze*) + os= + basic_machine=$1 + ;; + -bluegene*) + os=-cnk + ;; + -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; + -scout) + ;; + -wrs) + os=-vxworks + basic_machine=$1 + ;; + -chorusos*) + os=-chorusos + basic_machine=$1 + ;; + -chorusrdb) + os=-chorusrdb + basic_machine=$1 + ;; + -hiux*) + os=-hiuxwe2 + ;; + -sco6) + os=-sco5v6 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5) + os=-sco3.2v5 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco4) + os=-sco3.2v4 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2v[4-9]*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5v6*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -udk*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -isc) + os=-isc2.2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -clix*) + basic_machine=clipper-intergraph + ;; + -isc*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -lynx*178) + os=-lynxos178 + ;; + -lynx*5) + os=-lynxos5 + ;; + -lynx*) + os=-lynxos + ;; + -ptx*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` + ;; + -windowsnt*) + os=`echo $os | sed -e 's/windowsnt/winnt/'` + ;; + -psos*) + os=-psos + ;; + -mint | -mint[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; +esac + +# Decode aliases for certain CPU-COMPANY combinations. +case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. + 1750a | 580 \ + | a29k \ + | aarch64 | aarch64_be \ + | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ + | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ + | am33_2.0 \ + | arc | arceb \ + | arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \ + | avr | avr32 \ + | be32 | be64 \ + | bfin \ + | c4x | c8051 | clipper \ + | d10v | d30v | dlx | dsp16xx \ + | epiphany \ + | fido | fr30 | frv \ + | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ + | hexagon \ + | i370 | i860 | i960 | ia64 \ + | ip2k | iq2000 \ + | k1om \ + | le32 | le64 \ + | lm32 \ + | m32c | m32r | m32rle | m68000 | m68k | m88k \ + | maxq | mb | microblaze | microblazeel | mcore | mep | metag \ + | mips | mipsbe | mipseb | mipsel | mipsle \ + | mips16 \ + | mips64 | mips64el \ + | mips64octeon | mips64octeonel \ + | mips64orion | mips64orionel \ + | mips64r5900 | mips64r5900el \ + | mips64vr | mips64vrel \ + | mips64vr4100 | mips64vr4100el \ + | mips64vr4300 | mips64vr4300el \ + | mips64vr5000 | mips64vr5000el \ + | mips64vr5900 | mips64vr5900el \ + | mipsisa32 | mipsisa32el \ + | mipsisa32r2 | mipsisa32r2el \ + | mipsisa32r6 | mipsisa32r6el \ + | mipsisa64 | mipsisa64el \ + | mipsisa64r2 | mipsisa64r2el \ + | mipsisa64r6 | mipsisa64r6el \ + | mipsisa64sb1 | mipsisa64sb1el \ + | mipsisa64sr71k | mipsisa64sr71kel \ + | mipsr5900 | mipsr5900el \ + | mipstx39 | mipstx39el \ + | mn10200 | mn10300 \ + | moxie \ + | mt \ + | msp430 \ + | nds32 | nds32le | nds32be \ + | nios | nios2 | nios2eb | nios2el \ + | ns16k | ns32k \ + | open8 | or1k | or1knd | or32 \ + | pdp10 | pdp11 | pj | pjl \ + | powerpc | powerpc64 | powerpc64le | powerpcle \ + | pyramid \ + | riscv32 | riscv64 \ + | rl78 | rx \ + | score \ + | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ + | sh64 | sh64le \ + | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ + | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ + | spu \ + | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \ + | ubicom32 \ + | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \ + | visium \ + | we32k \ + | x86 | xc16x | xstormy16 | xtensa \ + | z8k | z80) + basic_machine=$basic_machine-unknown + ;; + c54x) + basic_machine=tic54x-unknown + ;; + c55x) + basic_machine=tic55x-unknown + ;; + c6x) + basic_machine=tic6x-unknown + ;; + leon|leon[3-9]) + basic_machine=sparc-$basic_machine + ;; + m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip) + basic_machine=$basic_machine-unknown + os=-none + ;; + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) + ;; + ms1) + basic_machine=mt-unknown + ;; + + strongarm | thumb | xscale) + basic_machine=arm-unknown + ;; + xgate) + basic_machine=$basic_machine-unknown + os=-none + ;; + xscaleeb) + basic_machine=armeb-unknown + ;; + + xscaleel) + basic_machine=armel-unknown + ;; + + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and + # (2) the word "unknown" tends to confuse beginning users. + i*86 | x86_64) + basic_machine=$basic_machine-pc + ;; + # Object if more than one company name word. + *-*-*) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; + # Recognize the basic CPU types with company name. + 580-* \ + | a29k-* \ + | aarch64-* | aarch64_be-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ + | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ + | alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \ + | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ + | avr-* | avr32-* \ + | be32-* | be64-* \ + | bfin-* | bs2000-* \ + | c[123]* | c30-* | [cjt]90-* | c4x-* \ + | c8051-* | clipper-* | craynv-* | cydra-* \ + | d10v-* | d30v-* | dlx-* \ + | elxsi-* \ + | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ + | h8300-* | h8500-* \ + | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ + | hexagon-* \ + | i*86-* | i860-* | i960-* | ia64-* \ + | ip2k-* | iq2000-* \ + | k1om-* \ + | le32-* | le64-* \ + | lm32-* \ + | m32c-* | m32r-* | m32rle-* \ + | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ + | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \ + | microblaze-* | microblazeel-* \ + | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ + | mips16-* \ + | mips64-* | mips64el-* \ + | mips64octeon-* | mips64octeonel-* \ + | mips64orion-* | mips64orionel-* \ + | mips64r5900-* | mips64r5900el-* \ + | mips64vr-* | mips64vrel-* \ + | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* \ + | mips64vr5000-* | mips64vr5000el-* \ + | mips64vr5900-* | mips64vr5900el-* \ + | mipsisa32-* | mipsisa32el-* \ + | mipsisa32r2-* | mipsisa32r2el-* \ + | mipsisa32r6-* | mipsisa32r6el-* \ + | mipsisa64-* | mipsisa64el-* \ + | mipsisa64r2-* | mipsisa64r2el-* \ + | mipsisa64r6-* | mipsisa64r6el-* \ + | mipsisa64sb1-* | mipsisa64sb1el-* \ + | mipsisa64sr71k-* | mipsisa64sr71kel-* \ + | mipsr5900-* | mipsr5900el-* \ + | mipstx39-* | mipstx39el-* \ + | mmix-* \ + | mt-* \ + | msp430-* \ + | nds32-* | nds32le-* | nds32be-* \ + | nios-* | nios2-* | nios2eb-* | nios2el-* \ + | none-* | np1-* | ns16k-* | ns32k-* \ + | open8-* \ + | or1k*-* \ + | orion-* \ + | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \ + | pyramid-* \ + | rl78-* | romp-* | rs6000-* | rx-* \ + | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ + | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ + | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ + | sparclite-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \ + | tahoe-* \ + | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ + | tile*-* \ + | tron-* \ + | ubicom32-* \ + | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \ + | vax-* \ + | visium-* \ + | we32k-* \ + | x86-* | x86_64-* | xc16x-* | xps100-* \ + | xstormy16-* | xtensa*-* \ + | ymp-* \ + | z8k-* | z80-*) + ;; + # Recognize the basic CPU types without company name, with glob match. + xtensa*) + basic_machine=$basic_machine-unknown + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 386bsd) + basic_machine=i386-unknown + os=-bsd + ;; + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + basic_machine=m68000-att + ;; + 3b*) + basic_machine=we32k-att + ;; + a29khif) + basic_machine=a29k-amd + os=-udi + ;; + abacus) + basic_machine=abacus-unknown + ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout + ;; + alliant | fx80) + basic_machine=fx80-alliant + ;; + altos | altos3068) + basic_machine=m68k-altos + ;; + am29k) + basic_machine=a29k-none + os=-bsd + ;; + amd64) + basic_machine=x86_64-pc + ;; + amd64-*) + basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + amdahl) + basic_machine=580-amdahl + os=-sysv + ;; + amiga | amiga-*) + basic_machine=m68k-unknown + ;; + amigaos | amigados) + basic_machine=m68k-unknown + os=-amigaos + ;; + amigaunix | amix) + basic_machine=m68k-unknown + os=-sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=-sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + os=-bsd + ;; + aros) + basic_machine=i386-pc + os=-aros + ;; + aux) + basic_machine=m68k-apple + os=-aux + ;; + balance) + basic_machine=ns32k-sequent + os=-dynix + ;; + blackfin) + basic_machine=bfin-unknown + os=-linux + ;; + blackfin-*) + basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + bluegene*) + basic_machine=powerpc-ibm + os=-cnk + ;; + c54x-*) + basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + c55x-*) + basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + c6x-*) + basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + c90) + basic_machine=c90-cray + os=-unicos + ;; + cegcc) + basic_machine=arm-unknown + os=-cegcc + ;; + convex-c1) + basic_machine=c1-convex + os=-bsd + ;; + convex-c2) + basic_machine=c2-convex + os=-bsd + ;; + convex-c32) + basic_machine=c32-convex + os=-bsd + ;; + convex-c34) + basic_machine=c34-convex + os=-bsd + ;; + convex-c38) + basic_machine=c38-convex + os=-bsd + ;; + cray | j90) + basic_machine=j90-cray + os=-unicos + ;; + craynv) + basic_machine=craynv-cray + os=-unicosmp + ;; + cr16 | cr16-*) + basic_machine=cr16-unknown + os=-elf + ;; + crds | unos) + basic_machine=m68k-crds + ;; + crisv32 | crisv32-* | etraxfs*) + basic_machine=crisv32-axis + ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; + crx) + basic_machine=crx-unknown + os=-elf + ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; + decsystem10* | dec10*) + basic_machine=pdp10-dec + os=-tops10 + ;; + decsystem20* | dec20*) + basic_machine=pdp10-dec + os=-tops20 + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola + ;; + delta88) + basic_machine=m88k-motorola + os=-sysv3 + ;; + dicos) + basic_machine=i686-pc + os=-dicos + ;; + djgpp) + basic_machine=i586-pc + os=-msdosdjgpp + ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx + ;; + dpx2* | dpx2*-bull) + basic_machine=m68k-bull + os=-sysv3 + ;; + ebmon29k) + basic_machine=a29k-amd + os=-ebmon + ;; + elxsi) + basic_machine=elxsi-elxsi + os=-bsd + ;; + encore | umax | mmax) + basic_machine=ns32k-encore + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=-ose + ;; + fx2800) + basic_machine=i860-alliant + ;; + genix) + basic_machine=ns32k-ns + ;; + gmicro) + basic_machine=tron-gmicro + os=-sysv + ;; + go32) + basic_machine=i386-pc + os=-go32 + ;; + h3050r* | hiux*) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=-hms + ;; + h8300xray) + basic_machine=h8300-hitachi + os=-xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=-hms + ;; + harris) + basic_machine=m88k-harris + os=-sysv3 + ;; + hp300-*) + basic_machine=m68k-hp + ;; + hp300bsd) + basic_machine=m68k-hp + os=-bsd + ;; + hp300hpux) + basic_machine=m68k-hp + os=-hpux + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + basic_machine=m68000-hp + ;; + hp9k3[2-9][0-9]) + basic_machine=m68k-hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + basic_machine=hppa1.1-hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hppa-next) + os=-nextstep3 + ;; + hppaosf) + basic_machine=hppa1.1-hp + os=-osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=-proelf + ;; + i370-ibm* | ibm*) + basic_machine=i370-ibm + ;; + i*86v32) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv32 + ;; + i*86v4*) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv4 + ;; + i*86v) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv + ;; + i*86sol2) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-solaris2 + ;; + i386mach) + basic_machine=i386-mach + os=-mach + ;; + i386-vsta | vsta) + basic_machine=i386-unknown + os=-vsta + ;; + iris | iris4d) + basic_machine=mips-sgi + case $os in + -irix*) + ;; + *) + os=-irix4 + ;; + esac + ;; + isi68 | isi) + basic_machine=m68k-isi + os=-sysv + ;; + leon-*|leon[3-9]-*) + basic_machine=sparc-`echo $basic_machine | sed 's/-.*//'` + ;; + m68knommu) + basic_machine=m68k-unknown + os=-linux + ;; + m68knommu-*) + basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + m88k-omron*) + basic_machine=m88k-omron + ;; + magnum | m3230) + basic_machine=mips-mips + os=-sysv + ;; + merlin) + basic_machine=ns32k-utek + os=-sysv + ;; + microblaze*) + basic_machine=microblaze-xilinx + ;; + mingw64) + basic_machine=x86_64-pc + os=-mingw64 + ;; + mingw32) + basic_machine=i686-pc + os=-mingw32 + ;; + mingw32ce) + basic_machine=arm-unknown + os=-mingw32ce + ;; + miniframe) + basic_machine=m68000-convergent + ;; + *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; + mips3*-*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; + morphos) + basic_machine=powerpc-unknown + os=-morphos + ;; + moxiebox) + basic_machine=moxie-unknown + os=-moxiebox + ;; + msdos) + basic_machine=i386-pc + os=-msdos + ;; + ms1-*) + basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` + ;; + msys) + basic_machine=i686-pc + os=-msys + ;; + mvs) + basic_machine=i370-ibm + os=-mvs + ;; + nacl) + basic_machine=le32-unknown + os=-nacl + ;; + ncr3000) + basic_machine=i486-ncr + os=-sysv4 + ;; + netbsd386) + basic_machine=i386-unknown + os=-netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=-linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=-newsos + ;; + news1000) + basic_machine=m68030-sony + os=-newsos + ;; + news-3600 | risc-news) + basic_machine=mips-sony + os=-newsos + ;; + necv70) + basic_machine=v70-nec + os=-sysv + ;; + next | m*-next ) + basic_machine=m68k-next + case $os in + -nextstep* ) + ;; + -ns2*) + os=-nextstep2 + ;; + *) + os=-nextstep3 + ;; + esac + ;; + nh3000) + basic_machine=m68k-harris + os=-cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=-cxux + ;; + nindy960) + basic_machine=i960-intel + os=-nindy + ;; + mon960) + basic_machine=i960-intel + os=-mon960 + ;; + nonstopux) + basic_machine=mips-compaq + os=-nonstopux + ;; + np1) + basic_machine=np1-gould + ;; + neo-tandem) + basic_machine=neo-tandem + ;; + nse-tandem) + basic_machine=nse-tandem + ;; + nsr-tandem) + basic_machine=nsr-tandem + ;; + op50n-* | op60c-*) + basic_machine=hppa1.1-oki + os=-proelf + ;; + openrisc | openrisc-*) + basic_machine=or32-unknown + ;; + os400) + basic_machine=powerpc-ibm + os=-os400 + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose + ;; + os68k) + basic_machine=m68k-none + os=-os68k + ;; + pa-hitachi) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + paragon) + basic_machine=i860-intel + os=-osf + ;; + parisc) + basic_machine=hppa-unknown + os=-linux + ;; + parisc-*) + basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + pbd) + basic_machine=sparc-tti + ;; + pbb) + basic_machine=m68k-tti + ;; + pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; + pc98) + basic_machine=i386-pc + ;; + pc98-*) + basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium | p5 | k5 | k6 | nexgen | viac3) + basic_machine=i586-pc + ;; + pentiumpro | p6 | 6x86 | athlon | athlon_*) + basic_machine=i686-pc + ;; + pentiumii | pentium2 | pentiumiii | pentium3) + basic_machine=i686-pc + ;; + pentium4) + basic_machine=i786-pc + ;; + pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) + basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumpro-* | p6-* | 6x86-* | athlon-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium4-*) + basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pn) + basic_machine=pn-gould + ;; + power) basic_machine=power-ibm + ;; + ppc | ppcbe) basic_machine=powerpc-unknown + ;; + ppc-* | ppcbe-*) + basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle | ppc-le | powerpc-little) + basic_machine=powerpcle-unknown + ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64) basic_machine=powerpc64-unknown + ;; + ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64le | powerpc64little | ppc64-le | powerpc64-little) + basic_machine=powerpc64le-unknown + ;; + ppc64le-* | powerpc64little-*) + basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ps2) + basic_machine=i386-ibm + ;; + pw32) + basic_machine=i586-unknown + os=-pw32 + ;; + rdos | rdos64) + basic_machine=x86_64-pc + os=-rdos + ;; + rdos32) + basic_machine=i386-pc + os=-rdos + ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff + ;; + rm[46]00) + basic_machine=mips-siemens + ;; + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; + s390 | s390-*) + basic_machine=s390-ibm + ;; + s390x | s390x-*) + basic_machine=s390x-ibm + ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; + sb1) + basic_machine=mipsisa64sb1-unknown + ;; + sb1el) + basic_machine=mipsisa64sb1el-unknown + ;; + sde) + basic_machine=mipsisa32-sde + os=-elf + ;; + sei) + basic_machine=mips-sei + os=-seiux + ;; + sequent) + basic_machine=i386-sequent + ;; + sh) + basic_machine=sh-hitachi + os=-hms + ;; + sh5el) + basic_machine=sh5le-unknown + ;; + sh64) + basic_machine=sh64-unknown + ;; + sparclite-wrs | simso-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; + sps7) + basic_machine=m68k-bull + os=-sysv2 + ;; + spur) + basic_machine=spur-unknown + ;; + st2000) + basic_machine=m68k-tandem + ;; + stratus) + basic_machine=i860-stratus + os=-sysv4 + ;; + strongarm-* | thumb-*) + basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + sun2) + basic_machine=m68000-sun + ;; + sun2os3) + basic_machine=m68000-sun + os=-sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=-sunos4 + ;; + sun3os3) + basic_machine=m68k-sun + os=-sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=-sunos4 + ;; + sun4os3) + basic_machine=sparc-sun + os=-sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=-sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=-solaris2 + ;; + sun3 | sun3-*) + basic_machine=m68k-sun + ;; + sun4) + basic_machine=sparc-sun + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + ;; + sv1) + basic_machine=sv1-cray + os=-unicos + ;; + symmetry) + basic_machine=i386-sequent + os=-dynix + ;; + t3e) + basic_machine=alphaev5-cray + os=-unicos + ;; + t90) + basic_machine=t90-cray + os=-unicos + ;; + tile*) + basic_machine=$basic_machine-unknown + os=-linux-gnu + ;; + tx39) + basic_machine=mipstx39-unknown + ;; + tx39el) + basic_machine=mipstx39el-unknown + ;; + toad1) + basic_machine=pdp10-xkl + os=-tops20 + ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; + tpf) + basic_machine=s390x-ibm + os=-tpf + ;; + udi29k) + basic_machine=a29k-amd + os=-udi + ;; + ultra3) + basic_machine=a29k-nyu + os=-sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + os=-none + ;; + vaxv) + basic_machine=vax-dec + os=-sysv + ;; + vms) + basic_machine=vax-dec + os=-vms + ;; + vpp*|vx|vx-*) + basic_machine=f301-fujitsu + ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=-vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=-vxworks + ;; + w65*) + basic_machine=w65-wdc + os=-none + ;; + w89k-*) + basic_machine=hppa1.1-winbond + os=-proelf + ;; + xbox) + basic_machine=i686-pc + os=-mingw32 + ;; + xps | xps100) + basic_machine=xps100-honeywell + ;; + xscale-* | xscalee[bl]-*) + basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'` + ;; + ymp) + basic_machine=ymp-cray + os=-unicos + ;; + z8k-*-coff) + basic_machine=z8k-unknown + os=-sim + ;; + z80-*-coff) + basic_machine=z80-unknown + os=-sim + ;; + none) + basic_machine=none-none + os=-none + ;; + +# Here we handle the default manufacturer of certain CPU types. It is in +# some cases the only manufacturer, in others, it is the most popular. + w89k) + basic_machine=hppa1.1-winbond + ;; + op50n) + basic_machine=hppa1.1-oki + ;; + op60c) + basic_machine=hppa1.1-oki + ;; + romp) + basic_machine=romp-ibm + ;; + mmix) + basic_machine=mmix-knuth + ;; + rs6000) + basic_machine=rs6000-ibm + ;; + vax) + basic_machine=vax-dec + ;; + pdp10) + # there are many clones, so DEC is not a safe bet + basic_machine=pdp10-unknown + ;; + pdp11) + basic_machine=pdp11-dec + ;; + we32k) + basic_machine=we32k-att + ;; + sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) + basic_machine=sh-unknown + ;; + sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) + basic_machine=sparc-sun + ;; + cydra) + basic_machine=cydra-cydrome + ;; + orion) + basic_machine=orion-highlevel + ;; + orion105) + basic_machine=clipper-highlevel + ;; + mac | mpw | mac-mpw) + basic_machine=m68k-apple + ;; + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; + *-unknown) + # Make sure to match an already-canonicalized machine name. + ;; + *) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $basic_machine in + *-digital*) + basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` + ;; + *-commodore*) + basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if [ x"$os" != x"" ] +then +case $os in + # First match some system type aliases + # that might get confused with valid system types. + # -solaris* is a basic system type, with this one exception. + -auroraux) + os=-auroraux + ;; + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + -solaris) + os=-solaris2 + ;; + -svr4*) + os=-sysv4 + ;; + -unixware*) + os=-sysv4.2uw + ;; + -gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # First accept the basic system types. + # The portable systems comes first. + # Each alternative MUST END IN A *, to match a version number. + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ + | -sym* | -kopensolaris* | -plan9* \ + | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ + | -aos* | -aros* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ + | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ + | -bitrig* | -openbsd* | -solidbsd* \ + | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ + | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ + | -chorusos* | -chorusrdb* | -cegcc* \ + | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \ + | -linux-newlib* | -linux-musl* | -linux-uclibc* \ + | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \ + | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ + | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ + | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ + | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ + | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* | -tirtos*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -qnx*) + case $basic_machine in + x86-* | i*86-*) + ;; + *) + os=-nto$os + ;; + esac + ;; + -nto-qnx*) + ;; + -nto*) + os=`echo $os | sed -e 's|nto|nto-qnx|'` + ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; + -linux-dietlibc) + os=-linux-dietlibc + ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + -sunos5*) + os=`echo $os | sed -e 's|sunos5|solaris2|'` + ;; + -sunos6*) + os=`echo $os | sed -e 's|sunos6|solaris3|'` + ;; + -opened*) + os=-openedition + ;; + -os400*) + os=-os400 + ;; + -wince*) + os=-wince + ;; + -osfrose*) + os=-osfrose + ;; + -osf*) + os=-osf + ;; + -utek*) + os=-bsd + ;; + -dynix*) + os=-bsd + ;; + -acis*) + os=-aos + ;; + -atheos*) + os=-atheos + ;; + -syllable*) + os=-syllable + ;; + -386bsd) + os=-bsd + ;; + -ctix* | -uts*) + os=-sysv + ;; + -nova*) + os=-rtmk-nova + ;; + -ns2 ) + os=-nextstep2 + ;; + -nsk*) + os=-nsk + ;; + # Preserve the version number of sinix5. + -sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + -sinix*) + os=-sysv4 + ;; + -tpf*) + os=-tpf + ;; + -triton*) + os=-sysv3 + ;; + -oss*) + os=-sysv3 + ;; + -svr4) + os=-sysv4 + ;; + -svr3) + os=-sysv3 + ;; + -sysvr4) + os=-sysv4 + ;; + # This must come after -sysvr4. + -sysv*) + ;; + -ose*) + os=-ose + ;; + -es1800*) + os=-ose + ;; + -xenix) + os=-xenix + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + os=-mint + ;; + -aros*) + os=-aros + ;; + -zvmoe) + os=-zvmoe + ;; + -dicos*) + os=-dicos + ;; + -nacl*) + ;; + -none) + ;; + *) + # Get rid of the `-' at the beginning of $os. + os=`echo $os | sed 's/[^-]*-//'` + echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 + exit 1 + ;; +esac +else + +# Here we handle the default operating systems that come with various machines. +# The value should be what the vendor currently ships out the door with their +# machine or put another way, the most popular os provided with the machine. + +# Note that if you're going to try to match "-MANUFACTURER" here (say, +# "-sun"), then you have to tell the case statement up towards the top +# that MANUFACTURER isn't an operating system. Otherwise, code above +# will signal an error saying that MANUFACTURER isn't an operating +# system, and we'll never get to this point. + +case $basic_machine in + score-*) + os=-elf + ;; + spu-*) + os=-elf + ;; + *-acorn) + os=-riscix1.2 + ;; + arm*-rebel) + os=-linux + ;; + arm*-semi) + os=-aout + ;; + c4x-* | tic4x-*) + os=-coff + ;; + c8051-*) + os=-elf + ;; + hexagon-*) + os=-elf + ;; + tic54x-*) + os=-coff + ;; + tic55x-*) + os=-coff + ;; + tic6x-*) + os=-coff + ;; + # This must come before the *-dec entry. + pdp10-*) + os=-tops20 + ;; + pdp11-*) + os=-none + ;; + *-dec | vax-*) + os=-ultrix4.2 + ;; + m68*-apollo) + os=-domain + ;; + i386-sun) + os=-sunos4.0.2 + ;; + m68000-sun) + os=-sunos3 + ;; + m68*-cisco) + os=-aout + ;; + mep-*) + os=-elf + ;; + mips*-cisco) + os=-elf + ;; + mips*-*) + os=-elf + ;; + or32-*) + os=-coff + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; + sparc-* | *-sun) + os=-sunos4.1.1 + ;; + *-be) + os=-beos + ;; + *-haiku) + os=-haiku + ;; + *-ibm) + os=-aix + ;; + *-knuth) + os=-mmixware + ;; + *-wec) + os=-proelf + ;; + *-winbond) + os=-proelf + ;; + *-oki) + os=-proelf + ;; + *-hp) + os=-hpux + ;; + *-hitachi) + os=-hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=-sysv + ;; + *-cbm) + os=-amigaos + ;; + *-dg) + os=-dgux + ;; + *-dolphin) + os=-sysv3 + ;; + m68k-ccur) + os=-rtu + ;; + m88k-omron*) + os=-luna + ;; + *-next ) + os=-nextstep + ;; + *-sequent) + os=-ptx + ;; + *-crds) + os=-unos + ;; + *-ns) + os=-genix + ;; + i370-*) + os=-mvs + ;; + *-next) + os=-nextstep3 + ;; + *-gould) + os=-sysv + ;; + *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; + *-sgi) + os=-irix + ;; + *-siemens) + os=-sysv4 + ;; + *-masscomp) + os=-rtu + ;; + f30[01]-fujitsu | f700-fujitsu) + os=-uxpv + ;; + *-rom68k) + os=-coff + ;; + *-*bug) + os=-coff + ;; + *-apple) + os=-macos + ;; + *-atari*) + os=-mint + ;; + *) + os=-none + ;; +esac +fi + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +vendor=unknown +case $basic_machine in + *-unknown) + case $os in + -riscix*) + vendor=acorn + ;; + -sunos*) + vendor=sun + ;; + -cnk*|-aix*) + vendor=ibm + ;; + -beos*) + vendor=be + ;; + -hpux*) + vendor=hp + ;; + -mpeix*) + vendor=hp + ;; + -hiux*) + vendor=hitachi + ;; + -unos*) + vendor=crds + ;; + -dgux*) + vendor=dg + ;; + -luna*) + vendor=omron + ;; + -genix*) + vendor=ns + ;; + -mvs* | -opened*) + vendor=ibm + ;; + -os400*) + vendor=ibm + ;; + -ptx*) + vendor=sequent + ;; + -tpf*) + vendor=ibm + ;; + -vxsim* | -vxworks* | -windiss*) + vendor=wrs + ;; + -aux*) + vendor=apple + ;; + -hms*) + vendor=hitachi + ;; + -mpw* | -macos*) + vendor=apple + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + vendor=atari + ;; + -vos*) + vendor=stratus + ;; + esac + basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; +esac + +echo $basic_machine$os +exit + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/compat/libjpeg/configure b/compat/libjpeg/configure new file mode 100755 index 0000000..d4a1131 --- /dev/null +++ b/compat/libjpeg/configure @@ -0,0 +1,15877 @@ +#! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.69 for libjpeg 9.2.0. +# +# +# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +# +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +# Use a proper internal environment variable to ensure we don't fall + # into an infinite loop, continuously re-executing ourselves. + if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then + _as_can_reexec=no; export _as_can_reexec; + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +as_fn_exit 255 + fi + # We don't want this to propagate to other subprocesses. + { _as_can_reexec=; unset _as_can_reexec;} +if test "x$CONFIG_SHELL" = x; then + as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi +" + as_required="as_fn_return () { (exit \$1); } +as_fn_success () { as_fn_return 0; } +as_fn_failure () { as_fn_return 1; } +as_fn_ret_success () { return 0; } +as_fn_ret_failure () { return 1; } + +exitcode=0 +as_fn_success || { exitcode=1; echo as_fn_success failed.; } +as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } +as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } +as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } +if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : + +else + exitcode=1; echo positional parameters were not saved. +fi +test x\$exitcode = x0 || exit 1 +test -x / || exit 1" + as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO + as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO + eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && + test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 +test \$(( 1 + 1 )) = 2 || exit 1 + + test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || ( + ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' + ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO + ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO + PATH=/empty FPATH=/empty; export PATH FPATH + test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\ + || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1" + if (eval "$as_required") 2>/dev/null; then : + as_have_required=yes +else + as_have_required=no +fi + if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : + +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_found=false +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + as_found=: + case $as_dir in #( + /*) + for as_base in sh bash ksh sh5; do + # Try only shells that exist, to save several forks. + as_shell=$as_dir/$as_base + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : + CONFIG_SHELL=$as_shell as_have_required=yes + if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : + break 2 +fi +fi + done;; + esac + as_found=false +done +$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : + CONFIG_SHELL=$SHELL as_have_required=yes +fi; } +IFS=$as_save_IFS + + + if test "x$CONFIG_SHELL" != x; then : + export CONFIG_SHELL + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +exit 255 +fi + + if test x$as_have_required = xno; then : + $as_echo "$0: This script requires a shell more modern than all" + $as_echo "$0: the shells that I found on your system." + if test x${ZSH_VERSION+set} = xset ; then + $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" + $as_echo "$0: be upgraded to zsh 4.3.4 or later." + else + $as_echo "$0: Please tell bug-autoconf@gnu.org about your system, +$0: including any error possibly output before this +$0: message. Then install a modern shell, or manually run +$0: the script under such a shell if you do have one." + fi + exit 1 +fi +fi +fi +SHELL=${CONFIG_SHELL-/bin/sh} +export SHELL +# Unset more variables known to interfere with behavior of common tools. +CLICOLOR_FORCE= GREP_OPTIONS= +unset CLICOLOR_FORCE GREP_OPTIONS + +## --------------------- ## +## M4sh Shell Functions. ## +## --------------------- ## +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + + + as_lineno_1=$LINENO as_lineno_1a=$LINENO + as_lineno_2=$LINENO as_lineno_2a=$LINENO + eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && + test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { + # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } + + # If we had to re-execute with $CONFIG_SHELL, we're ensured to have + # already done that, so ensure we don't try to do so again and fall + # in an infinite loop. This has already happened in practice. + _as_can_reexec=no; export _as_can_reexec + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + +SHELL=${CONFIG_SHELL-/bin/sh} + + +test -n "$DJDIR" || exec 7<&0 &1 + +# Name of the host. +# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_clean_files= +ac_config_libobj_dir=. +LIBOBJS= +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= + +# Identity of this package. +PACKAGE_NAME='libjpeg' +PACKAGE_TARNAME='libjpeg' +PACKAGE_VERSION='9.2.0' +PACKAGE_STRING='libjpeg 9.2.0' +PACKAGE_BUGREPORT='' +PACKAGE_URL='' + +# Factoring default headers for most tests. +ac_includes_default="\ +#include +#ifdef HAVE_SYS_TYPES_H +# include +#endif +#ifdef HAVE_SYS_STAT_H +# include +#endif +#ifdef STDC_HEADERS +# include +# include +#else +# ifdef HAVE_STDLIB_H +# include +# endif +#endif +#ifdef HAVE_STRING_H +# if !defined STDC_HEADERS && defined HAVE_MEMORY_H +# include +# endif +# include +#endif +#ifdef HAVE_STRINGS_H +# include +#endif +#ifdef HAVE_INTTYPES_H +# include +#endif +#ifdef HAVE_STDINT_H +# include +#endif +#ifdef HAVE_UNISTD_H +# include +#endif" + +ac_subst_vars='am__EXEEXT_FALSE +am__EXEEXT_TRUE +LTLIBOBJS +LIBOBJS +JPEG_LIB_VERSION +MEMORYMGR +LT_SYS_LIBRARY_PATH +OTOOL64 +OTOOL +LIPO +NMEDIT +DSYMUTIL +MANIFEST_TOOL +RANLIB +NM +ac_ct_DUMPBIN +DUMPBIN +LD +FGREP +SED +LIBTOOL +OBJDUMP +DLLTOOL +AS +EGREP +GREP +HAVE_LD_VERSION_SCRIPT_FALSE +HAVE_LD_VERSION_SCRIPT_TRUE +ac_ct_AR +AR +LN_S +CPP +am__fastdepCC_FALSE +am__fastdepCC_TRUE +CCDEPMODE +am__nodep +AMDEPBACKSLASH +AMDEP_FALSE +AMDEP_TRUE +am__quote +am__include +DEPDIR +OBJEXT +EXEEXT +ac_ct_CC +CPPFLAGS +LDFLAGS +CFLAGS +CC +MAINT +MAINTAINER_MODE_FALSE +MAINTAINER_MODE_TRUE +AM_BACKSLASH +AM_DEFAULT_VERBOSITY +AM_DEFAULT_V +AM_V +am__untar +am__tar +AMTAR +am__leading_dot +SET_MAKE +AWK +mkdir_p +MKDIR_P +INSTALL_STRIP_PROGRAM +STRIP +install_sh +MAKEINFO +AUTOHEADER +AUTOMAKE +AUTOCONF +ACLOCAL +VERSION +PACKAGE +CYGPATH_W +am__isrc +INSTALL_DATA +INSTALL_SCRIPT +INSTALL_PROGRAM +target_os +target_vendor +target_cpu +target +host_os +host_vendor +host_cpu +host +build_os +build_vendor +build_cpu +build +target_alias +host_alias +build_alias +LIBS +ECHO_T +ECHO_N +ECHO_C +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_URL +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL' +ac_subst_files='' +ac_user_opts=' +enable_option_checking +enable_silent_rules +enable_maintainer_mode +enable_dependency_tracking +enable_ld_version_script +enable_shared +enable_static +with_pic +enable_fast_install +with_aix_soname +with_gnu_ld +with_sysroot +enable_libtool_lock +enable_maxmem +' + ac_precious_vars='build_alias +host_alias +target_alias +CC +CFLAGS +LDFLAGS +LIBS +CPPFLAGS +CPP +LT_SYS_LIBRARY_PATH' + + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +ac_unrecognized_opts= +ac_unrecognized_sep= +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datarootdir='${prefix}/share' +datadir='${datarootdir}' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +includedir='${prefix}/include' +oldincludedir='/usr/include' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' + +ac_prev= +ac_dashdash= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval $ac_prev=\$ac_option + ac_prev= + continue + fi + + case $ac_option in + *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *=) ac_optarg= ;; + *) ac_optarg=yes ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=\$ac_optarg ;; + + -without-* | --without-*) + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=no ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) as_fn_error $? "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information" + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + case $ac_envvar in #( + '' | [0-9]* | *[!_$as_cr_alnum]* ) + as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; + esac + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + as_fn_error $? "missing argument to $ac_option" +fi + +if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; + fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac +fi + +# Check all directory arguments for consistency. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir +do + eval ac_val=\$$ac_var + # Remove trailing slashes. + case $ac_val in + */ ) + ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` + eval $ac_var=\$ac_val;; + esac + # Be sure to have absolute directory names. + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac + as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + as_fn_error $? "working directory cannot be determined" +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + as_fn_error $? "pwd does not report name of working directory" + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$as_myself" || +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_myself" : 'X\(//\)[^/]' \| \ + X"$as_myself" : 'X\(//\)$' \| \ + X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_myself" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures libjpeg 9.2.0 to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking ...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root [DATAROOTDIR/doc/libjpeg] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] +_ACEOF + + cat <<\_ACEOF + +Program names: + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM run sed PROGRAM on installed program names + +System types: + --build=BUILD configure for building on BUILD [guessed] + --host=HOST cross-compile to build programs to run on HOST [BUILD] + --target=TARGET configure for building compilers for TARGET [HOST] +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of libjpeg 9.2.0:";; + esac + cat <<\_ACEOF + +Optional Features: + --disable-option-checking ignore unrecognized --enable/--with options + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --enable-silent-rules less verbose build output (undo: "make V=1") + --disable-silent-rules verbose build output (undo: "make V=0") + --enable-maintainer-mode + enable make rules and dependencies not useful (and + sometimes confusing) to the casual installer + --enable-dependency-tracking + do not reject slow dependency extractors + --disable-dependency-tracking + speeds up one-time build + --enable-ld-version-script + enable linker version script (default is enabled + when possible) + --enable-shared[=PKGS] build shared libraries [default=yes] + --enable-static[=PKGS] build static libraries [default=yes] + --enable-fast-install[=PKGS] + optimize for fast installation [default=yes] + --disable-libtool-lock avoid locking (might break parallel builds) + --enable-maxmem=N enable use of temp files, set max mem usage to N MB + +Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use + both] + --with-aix-soname=aix|svr4|both + shared library versioning (aka "SONAME") variant to + provide on AIX, [default=aix]. + --with-gnu-ld assume the C compiler uses GNU ld [default=no] + --with-sysroot[=DIR] Search for dependent libraries within DIR (or the + compiler's sysroot if not specified). + +Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory + LIBS libraries to pass to the linker, e.g. -l + CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if + you have headers in a nonstandard directory + CPP C preprocessor + LT_SYS_LIBRARY_PATH + User-defined run-time library search path. + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +Report bugs to the package provider. +_ACEOF +ac_status=$? +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +fi + +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +libjpeg configure 9.2.0 +generated by GNU Autoconf 2.69 + +Copyright (C) 2012 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit +fi + +## ------------------------ ## +## Autoconf initialization. ## +## ------------------------ ## + +# ac_fn_c_try_compile LINENO +# -------------------------- +# Try to compile conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_compile + +# ac_fn_c_try_cpp LINENO +# ---------------------- +# Try to preprocess conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_cpp () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } > conftest.i && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_cpp + +# ac_fn_c_try_link LINENO +# ----------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_link () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext conftest$ac_exeext + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + test -x conftest$ac_exeext + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information + # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would + # interfere with the next link command; also delete a directory that is + # left behind by Apple's compiler. We do this before executing the actions. + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_link + +# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists, giving a warning if it cannot be compiled using +# the include files in INCLUDES and setting the cache variable VAR +# accordingly. +ac_fn_c_check_header_mongrel () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if eval \${$3+:} false; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +else + # Is the header compilable? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 +$as_echo_n "checking $2 usability... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_header_compiler=yes +else + ac_header_compiler=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 +$as_echo "$ac_header_compiler" >&6; } + +# Is the header present? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 +$as_echo_n "checking $2 presence... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include <$2> +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + ac_header_preproc=yes +else + ac_header_preproc=no +fi +rm -f conftest.err conftest.i conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 +$as_echo "$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( + yes:no: ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 +$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} + ;; + no:yes:* ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 +$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 +$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 +$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 +$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} + ;; +esac + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=\$ac_header_compiler" +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_header_mongrel + +# ac_fn_c_try_run LINENO +# ---------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes +# that executables *can* be run. +ac_fn_c_try_run () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then : + ac_retval=0 +else + $as_echo "$as_me: program exited with status $ac_status" >&5 + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=$ac_status +fi + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_run + +# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists and can be compiled using the include files in +# INCLUDES, setting the cache variable VAR accordingly. +ac_fn_c_check_header_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_header_compile + +# ac_fn_c_check_func LINENO FUNC VAR +# ---------------------------------- +# Tests whether FUNC exists, setting the cache variable VAR accordingly +ac_fn_c_check_func () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Define $2 to an innocuous variant, in case declares $2. + For example, HP-UX 11i declares gettimeofday. */ +#define $2 innocuous_$2 + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $2 (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $2 + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $2 (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$2 || defined __stub___$2 +choke me +#endif + +int +main () +{ +return $2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_func +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by libjpeg $as_me 9.2.0, which was +generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + $as_echo "PATH: $as_dir" + done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; + 2) + as_fn_append ac_configure_args1 " '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + as_fn_append ac_configure_args " '$ac_arg'" + ;; + esac + done +done +{ ac_configure_args0=; unset ac_configure_args0;} +{ ac_configure_args1=; unset ac_configure_args1;} + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + $as_echo "## ---------------- ## +## Cache variables. ## +## ---------------- ##" + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + (set) 2>&1 | + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + sed -n \ + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( + *) + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) + echo + + $as_echo "## ----------------- ## +## Output variables. ## +## ----------------- ##" + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + $as_echo "## ------------------- ## +## File substitutions. ## +## ------------------- ##" + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi + + if test -s confdefs.h; then + $as_echo "## ----------- ## +## confdefs.h. ## +## ----------- ##" + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + $as_echo "$as_me: caught signal $ac_signal" + $as_echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -f -r conftest* confdefs.h + +$as_echo "/* confdefs.h */" > confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_URL "$PACKAGE_URL" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer an explicitly selected file to automatically selected ones. +ac_site_file1=NONE +ac_site_file2=NONE +if test -n "$CONFIG_SITE"; then + # We do not want a PATH search for config.site. + case $CONFIG_SITE in #(( + -*) ac_site_file1=./$CONFIG_SITE;; + */*) ac_site_file1=$CONFIG_SITE;; + *) ac_site_file1=./$CONFIG_SITE;; + esac +elif test "x$prefix" != xNONE; then + ac_site_file1=$prefix/share/config.site + ac_site_file2=$prefix/etc/config.site +else + ac_site_file1=$ac_default_prefix/share/config.site + ac_site_file2=$ac_default_prefix/etc/config.site +fi +for ac_site_file in "$ac_site_file1" "$ac_site_file2" +do + test "x$ac_site_file" = xNONE && continue + if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 +$as_echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" \ + || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "failed to load site script $ac_site_file +See \`config.log' for more details" "$LINENO" 5; } + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special files + # actually), so we avoid doing that. DJGPP emulates it as a regular file. + if test /dev/null != "$cache_file" && test -f "$cache_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 +$as_echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi +else + { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 +$as_echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 +$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 +$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 +$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) as_fn_append ac_configure_args " '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 +$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} + as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 +fi +## -------------------- ## +## Main body of script. ## +## -------------------- ## + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + +# Directory where autotools helper scripts lives. +ac_aux_dir= +for ac_dir in . "$srcdir"/.; do + if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + as_fn_error $? "cannot find install-sh, install.sh, or shtool in . \"$srcdir\"/." "$LINENO" 5 +fi + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + + + +# Generate configuration headers. +ac_config_headers="$ac_config_headers jconfig.h:jconfig.cfg" + + +# Hack: disable autoheader so that it doesn't overwrite our cfg template. +AUTOHEADER="echo autoheader ignored" + +# Check system type +# Make sure we can run config.sub. +$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || + as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 +$as_echo_n "checking build system type... " >&6; } +if ${ac_cv_build+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_build_alias=$build_alias +test "x$ac_build_alias" = x && + ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` +test "x$ac_build_alias" = x && + as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 +ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 +$as_echo "$ac_cv_build" >&6; } +case $ac_cv_build in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; +esac +build=$ac_cv_build +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_build +shift +build_cpu=$1 +build_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +build_os=$* +IFS=$ac_save_IFS +case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 +$as_echo_n "checking host system type... " >&6; } +if ${ac_cv_host+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "x$host_alias" = x; then + ac_cv_host=$ac_cv_build +else + ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 +$as_echo "$ac_cv_host" >&6; } +case $ac_cv_host in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; +esac +host=$ac_cv_host +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_host +shift +host_cpu=$1 +host_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +host_os=$* +IFS=$ac_save_IFS +case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5 +$as_echo_n "checking target system type... " >&6; } +if ${ac_cv_target+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "x$target_alias" = x; then + ac_cv_target=$ac_cv_host +else + ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5 +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_target" >&5 +$as_echo "$ac_cv_target" >&6; } +case $ac_cv_target in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5;; +esac +target=$ac_cv_target +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_target +shift +target_cpu=$1 +target_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +target_os=$* +IFS=$ac_save_IFS +case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac + + +# The aliases save the names the user supplied, while $host etc. +# will get canonicalized. +test -n "$target_alias" && + test "$program_prefix$program_suffix$program_transform_name" = \ + NONENONEs,x,x, && + program_prefix=${target_alias}- + +# Initialize Automake +# Don't require all the GNU mandated files +am__api_version='1.15' + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +# Reject install programs that cannot install multiple files. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 +$as_echo_n "checking for a BSD-compatible install... " >&6; } +if test -z "$INSTALL"; then +if ${ac_cv_path_install+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in #(( + ./ | .// | /[cC]/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + fi + done + done + ;; +esac + + done +IFS=$as_save_IFS + +rm -rf conftest.one conftest.two conftest.dir + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 +$as_echo "$INSTALL" >&6; } + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 +$as_echo_n "checking whether build environment is sane... " >&6; } +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[\\\"\#\$\&\'\`$am_lf]*) + as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; +esac +case $srcdir in + *[\\\"\#\$\&\'\`$am_lf\ \ ]*) + as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; +esac + +# Do 'set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + am_has_slept=no + for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + if test "$*" != "X $srcdir/configure conftest.file" \ + && test "$*" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + as_fn_error $? "ls -t appears to fail. Make sure there is not a broken + alias in your environment" "$LINENO" 5 + fi + if test "$2" = conftest.file || test $am_try -eq 2; then + break + fi + # Just in case. + sleep 1 + am_has_slept=yes + done + test "$2" = conftest.file + ) +then + # Ok. + : +else + as_fn_error $? "newly created file is older than distributed files! +Check your system clock" "$LINENO" 5 +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +# If we didn't sleep, we still need to ensure time stamps of config.status and +# generated files are strictly newer. +am_sleep_pid= +if grep 'slept: no' conftest.file >/dev/null 2>&1; then + ( sleep 1 ) & + am_sleep_pid=$! +fi + +rm -f conftest.file + +test "$program_prefix" != NONE && + program_transform_name="s&^&$program_prefix&;$program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s&\$&$program_suffix&;$program_transform_name" +# Double any \ or $. +# By default was `s,x,x', remove it if useless. +ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' +program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` + +# Expand $ac_aux_dir to an absolute path. +am_aux_dir=`cd "$ac_aux_dir" && pwd` + +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --is-lightweight"; then + am_missing_run="$MISSING " +else + am_missing_run= + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 +$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} +fi + +if test x"${install_sh+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi + +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the 'STRIP' environment variable to overrule this program. +if test "$cross_compiling" != no; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 +$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } +if test -z "$MKDIR_P"; then + if ${ac_cv_path_mkdir+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in mkdir gmkdir; do + for ac_exec_ext in '' $ac_executable_extensions; do + as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue + case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( + 'mkdir (GNU coreutils) '* | \ + 'mkdir (coreutils) '* | \ + 'mkdir (fileutils) '4.1*) + ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext + break 3;; + esac + done + done + done +IFS=$as_save_IFS + +fi + + test -d ./--version && rmdir ./--version + if test "${ac_cv_path_mkdir+set}" = set; then + MKDIR_P="$ac_cv_path_mkdir -p" + else + # As a last resort, use the slow shell script. Don't cache a + # value for MKDIR_P within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + MKDIR_P="$ac_install_sh -d" + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 +$as_echo "$MKDIR_P" >&6; } + +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AWK+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AWK="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 +$as_echo "$AWK" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AWK" && break +done + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + +rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null + +# Check whether --enable-silent-rules was given. +if test "${enable_silent_rules+set}" = set; then : + enableval=$enable_silent_rules; +fi + +case $enable_silent_rules in # ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=1;; +esac +am_make=${MAKE-make} +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 +$as_echo_n "checking whether $am_make supports nested variables... " >&6; } +if ${am_cv_make_support_nested_variables+:} false; then : + $as_echo_n "(cached) " >&6 +else + if $as_echo 'TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 +$as_echo "$am_cv_make_support_nested_variables" >&6; } +if test $am_cv_make_support_nested_variables = yes; then + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AM_BACKSLASH='\' + +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + am__isrc=' -I$(srcdir)' + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi + + +# Define the identity of the package. + PACKAGE='libjpeg' + VERSION='9.2.0' + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE "$PACKAGE" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define VERSION "$VERSION" +_ACEOF + +# Some tools Automake needs. + +ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} + + +AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} + + +AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} + + +AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} + + +MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# +# +mkdir_p='$(MKDIR_P)' + +# We need awk for the "check" target (and possibly the TAP driver). The +# system "awk" is bad on some platforms. +# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AMTAR='$${TAR-tar}' + + +# We'll loop over all known methods to create a tar archive until one works. +_am_tools='gnutar pax cpio none' + +am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' + + + + + + +# POSIX will say in a future version that running "rm -f" with no argument +# is OK; and we want to be able to make that assumption in our Makefile +# recipes. So use an aggressive probe to check that the usage we want is +# actually supported "in the wild" to an acceptable degree. +# See automake bug#10828. +# To make any issue more visible, cause the running configure to be aborted +# by default if the 'rm' program in use doesn't match our expectations; the +# user can still override this though. +if rm -f && rm -fr && rm -rf; then : OK; else + cat >&2 <<'END' +Oops! + +Your 'rm' program seems unable to run without file operands specified +on the command line, even when the '-f' option is present. This is contrary +to the behaviour of most rm programs out there, and not conforming with +the upcoming POSIX standard: + +Please tell bug-automake@gnu.org about your system, including the value +of your $PATH and any error possibly output before this message. This +can help us improve future automake versions. + +END + if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then + echo 'Configuration will proceed anyway, since you have set the' >&2 + echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 + echo >&2 + else + cat >&2 <<'END' +Aborting the configuration process, to ensure you take notice of the issue. + +You can download and install GNU coreutils to get an 'rm' implementation +that behaves properly: . + +If you want to complete the configuration process using your problematic +'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM +to "yes", and re-run configure. + +END + as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 + fi +fi + + +# Make --enable-silent-rules the default. +# To get verbose build output you may configure +# with --disable-silent-rules or use "make V=1". +# Check whether --enable-silent-rules was given. +if test "${enable_silent_rules+set}" = set; then : + enableval=$enable_silent_rules; +fi + +case $enable_silent_rules in # ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=0;; +esac +am_make=${MAKE-make} +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 +$as_echo_n "checking whether $am_make supports nested variables... " >&6; } +if ${am_cv_make_support_nested_variables+:} false; then : + $as_echo_n "(cached) " >&6 +else + if $as_echo 'TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 +$as_echo "$am_cv_make_support_nested_variables" >&6; } +if test $am_cv_make_support_nested_variables = yes; then + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AM_BACKSLASH='\' + + +# Add configure option --enable-maintainer-mode which enables +# dependency checking and generation useful to package maintainers. +# This is made an option to avoid confusing end users. + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5 +$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } + # Check whether --enable-maintainer-mode was given. +if test "${enable_maintainer_mode+set}" = set; then : + enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval +else + USE_MAINTAINER_MODE=no +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5 +$as_echo "$USE_MAINTAINER_MODE" >&6; } + if test $USE_MAINTAINER_MODE = yes; then + MAINTAINER_MODE_TRUE= + MAINTAINER_MODE_FALSE='#' +else + MAINTAINER_MODE_TRUE='#' + MAINTAINER_MODE_FALSE= +fi + + MAINT=$MAINTAINER_MODE_TRUE + + + +# Check for programs +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + fi +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl.exe +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_CC" && break +done + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +fi + +fi + + +test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "no acceptable C compiler found in \$PATH +See \`config.log' for more details" "$LINENO" 5; } + +# Provide some information about the compiler. +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done + +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } +ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` + +# The possible output files: +ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" + +ac_rmfiles= +for ac_file in $ac_files +do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac +done +rm -f $ac_rmfiles + +if { { ac_try="$ac_link_default" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link_default") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files '' +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an `-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. + break;; + * ) + break;; + esac +done +test "$ac_cv_exeext" = no && ac_cv_exeext= + +else + ac_file='' +fi +if test -z "$ac_file"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "C compiler cannot create executables +See \`config.log' for more details" "$LINENO" 5; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } +ac_exeext=$ac_cv_exeext + +rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 +$as_echo_n "checking for suffix of executables... " >&6; } +if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + break;; + * ) break;; + esac +done +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest conftest$ac_cv_exeext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 +$as_echo "$ac_cv_exeext" >&6; } + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +FILE *f = fopen ("conftest.out", "w"); + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} +_ACEOF +ac_clean_files="$ac_clean_files conftest.out" +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +if test "$cross_compiling" != yes; then + { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if { ac_try='./conftest$ac_cv_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details" "$LINENO" 5; } + fi + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } + +rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 +$as_echo_n "checking for suffix of object files... " >&6; } +if ${ac_cv_objext+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of object files: cannot compile +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 +$as_echo "$ac_cv_objext" >&6; } +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +if ${ac_cv_c_compiler_gnu+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_compiler_gnu=yes +else + ac_compiler_gnu=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes +else + GCC= +fi +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } +if ${ac_cv_prog_cc_g+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +else + CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if ${ac_cv_prog_cc_c89+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +struct stat; +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c89=$ac_arg +fi +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; +esac +if test "x$ac_cv_prog_cc_c89" != xno; then : + +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 +$as_echo_n "checking whether $CC understands -c and -o together... " >&6; } +if ${am_cv_prog_cc_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF + # Make sure it works both with $CC and with simple cc. + # Following AC_PROG_CC_C_O, we do the test twice because some + # compilers refuse to overwrite an existing .o file with -o, + # though they will create one. + am_cv_prog_cc_c_o=yes + for am_i in 1 2; do + if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 + ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } \ + && test -f conftest2.$ac_objext; then + : OK + else + am_cv_prog_cc_c_o=no + break + fi + done + rm -f core conftest* + unset am_i +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 +$as_echo "$am_cv_prog_cc_c_o" >&6; } +if test "$am_cv_prog_cc_c_o" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +DEPDIR="${am__leading_dot}deps" + +ac_config_commands="$ac_config_commands depfiles" + + +am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 +$as_echo_n "checking for style of include used by $am_make... " >&6; } +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from 'make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 +$as_echo "$_am_result" >&6; } +rm -f confinc confmf + +# Check whether --enable-dependency-tracking was given. +if test "${enable_dependency_tracking+set}" = set; then : + enableval=$enable_dependency_tracking; +fi + +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + am__nodep='_no' +fi + if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' +else + AMDEP_TRUE='#' + AMDEP_FALSE= +fi + + + +depcc="$CC" am_compiler_list= + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if ${am_cv_CC_dependencies_compiler_type+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CC_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + am__universal=false + case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_CC_dependencies_compiler_type=none +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } +CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= + am__fastdepCC_FALSE='#' +else + am__fastdepCC_TRUE='#' + am__fastdepCC_FALSE= +fi + + + case $ac_cv_prog_cc_stdc in #( + no) : + ac_cv_prog_cc_c99=no; ac_cv_prog_cc_c89=no ;; #( + *) : + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C99" >&5 +$as_echo_n "checking for $CC option to accept ISO C99... " >&6; } +if ${ac_cv_prog_cc_c99+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_prog_cc_c99=no +ac_save_CC=$CC +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include +#include +#include + +// Check varargs macros. These examples are taken from C99 6.10.3.5. +#define debug(...) fprintf (stderr, __VA_ARGS__) +#define showlist(...) puts (#__VA_ARGS__) +#define report(test,...) ((test) ? puts (#test) : printf (__VA_ARGS__)) +static void +test_varargs_macros (void) +{ + int x = 1234; + int y = 5678; + debug ("Flag"); + debug ("X = %d\n", x); + showlist (The first, second, and third items.); + report (x>y, "x is %d but y is %d", x, y); +} + +// Check long long types. +#define BIG64 18446744073709551615ull +#define BIG32 4294967295ul +#define BIG_OK (BIG64 / BIG32 == 4294967297ull && BIG64 % BIG32 == 0) +#if !BIG_OK + your preprocessor is broken; +#endif +#if BIG_OK +#else + your preprocessor is broken; +#endif +static long long int bignum = -9223372036854775807LL; +static unsigned long long int ubignum = BIG64; + +struct incomplete_array +{ + int datasize; + double data[]; +}; + +struct named_init { + int number; + const wchar_t *name; + double average; +}; + +typedef const char *ccp; + +static inline int +test_restrict (ccp restrict text) +{ + // See if C++-style comments work. + // Iterate through items via the restricted pointer. + // Also check for declarations in for loops. + for (unsigned int i = 0; *(text+i) != '\0'; ++i) + continue; + return 0; +} + +// Check varargs and va_copy. +static void +test_varargs (const char *format, ...) +{ + va_list args; + va_start (args, format); + va_list args_copy; + va_copy (args_copy, args); + + const char *str; + int number; + float fnumber; + + while (*format) + { + switch (*format++) + { + case 's': // string + str = va_arg (args_copy, const char *); + break; + case 'd': // int + number = va_arg (args_copy, int); + break; + case 'f': // float + fnumber = va_arg (args_copy, double); + break; + default: + break; + } + } + va_end (args_copy); + va_end (args); +} + +int +main () +{ + + // Check bool. + _Bool success = false; + + // Check restrict. + if (test_restrict ("String literal") == 0) + success = true; + char *restrict newvar = "Another string"; + + // Check varargs. + test_varargs ("s, d' f .", "string", 65, 34.234); + test_varargs_macros (); + + // Check flexible array members. + struct incomplete_array *ia = + malloc (sizeof (struct incomplete_array) + (sizeof (double) * 10)); + ia->datasize = 10; + for (int i = 0; i < ia->datasize; ++i) + ia->data[i] = i * 1.234; + + // Check named initializers. + struct named_init ni = { + .number = 34, + .name = L"Test wide string", + .average = 543.34343, + }; + + ni.number = 58; + + int dynamic_array[ni.number]; + dynamic_array[ni.number - 1] = 543; + + // work around unused variable warnings + return (!success || bignum == 0LL || ubignum == 0uLL || newvar[0] == 'x' + || dynamic_array[ni.number - 1] != 543); + + ; + return 0; +} +_ACEOF +for ac_arg in '' -std=gnu99 -std=c99 -c99 -AC99 -D_STDC_C99= -qlanglvl=extc99 +do + CC="$ac_save_CC $ac_arg" + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c99=$ac_arg +fi +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c99" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c99" in + x) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c99" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c99" >&5 +$as_echo "$ac_cv_prog_cc_c99" >&6; } ;; +esac +if test "x$ac_cv_prog_cc_c99" != xno; then : + ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c99 +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if ${ac_cv_prog_cc_c89+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +struct stat; +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c89=$ac_arg +fi +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; +esac +if test "x$ac_cv_prog_cc_c89" != xno; then : + ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c89 +else + ac_cv_prog_cc_stdc=no +fi + +fi + ;; +esac + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO Standard C" >&5 +$as_echo_n "checking for $CC option to accept ISO Standard C... " >&6; } + if ${ac_cv_prog_cc_stdc+:} false; then : + $as_echo_n "(cached) " >&6 +fi + + case $ac_cv_prog_cc_stdc in #( + no) : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; #( + '') : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; #( + *) : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_stdc" >&5 +$as_echo "$ac_cv_prog_cc_stdc" >&6; } ;; +esac + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 +$as_echo_n "checking how to run the C preprocessor... " >&6; } +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if ${ac_cv_prog_CPP+:} false; then : + $as_echo_n "(cached) " >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + break +fi + + done + ac_cv_prog_CPP=$CPP + +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 +$as_echo "$CPP" >&6; } +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details" "$LINENO" 5; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 +$as_echo_n "checking whether ln -s works... " >&6; } +LN_S=$as_ln_s +if test "$LN_S" = "ln -s"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 +$as_echo "no, using $LN_S" >&6; } +fi + + +if test -n "$ac_tool_prefix"; then + for ac_prog in ar lib "link -lib" + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AR="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AR=$ac_cv_prog_AR +if test -n "$AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 +$as_echo "$AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AR" && break + done +fi +if test -z "$AR"; then + ac_ct_AR=$AR + for ac_prog in ar lib "link -lib" +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_AR="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_AR=$ac_cv_prog_ac_ct_AR +if test -n "$ac_ct_AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 +$as_echo "$ac_ct_AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_AR" && break +done + + if test "x$ac_ct_AR" = x; then + AR="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AR=$ac_ct_AR + fi +fi + +: ${AR=ar} + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the archiver ($AR) interface" >&5 +$as_echo_n "checking the archiver ($AR) interface... " >&6; } +if ${am_cv_ar_interface+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + am_cv_ar_interface=ar + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int some_variable = 0; +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + am_ar_try='$AR cru libconftest.a conftest.$ac_objext >&5' + { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$am_ar_try\""; } >&5 + (eval $am_ar_try) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if test "$ac_status" -eq 0; then + am_cv_ar_interface=ar + else + am_ar_try='$AR -NOLOGO -OUT:conftest.lib conftest.$ac_objext >&5' + { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$am_ar_try\""; } >&5 + (eval $am_ar_try) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if test "$ac_status" -eq 0; then + am_cv_ar_interface=lib + else + am_cv_ar_interface=unknown + fi + fi + rm -f conftest.lib libconftest.a + +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_ar_interface" >&5 +$as_echo "$am_cv_ar_interface" >&6; } + +case $am_cv_ar_interface in +ar) + ;; +lib) + # Microsoft lib, so override with the ar-lib wrapper script. + # FIXME: It is wrong to rewrite AR. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__AR in this case, + # and then we could set am__AR="$am_aux_dir/ar-lib \$(AR)" or something + # similar. + AR="$am_aux_dir/ar-lib $AR" + ;; +unknown) + as_fn_error $? "could not determine $AR interface" "$LINENO" 5 + ;; +esac + + +# Check if LD supports linker scripts, +# and define automake conditional HAVE_LD_VERSION_SCRIPT if so. +# Check whether --enable-ld-version-script was given. +if test "${enable_ld_version_script+set}" = set; then : + enableval=$enable_ld_version_script; have_ld_version_script=$enableval +fi + +if test -z "$have_ld_version_script"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if LD -Wl,--version-script works" >&5 +$as_echo_n "checking if LD -Wl,--version-script works... " >&6; } + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -Wl,--version-script=conftest.map" + cat > conftest.map <conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + have_ld_version_script=yes +else + have_ld_version_script=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + rm -f conftest.map + LDFLAGS="$save_LDFLAGS" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_ld_version_script" >&5 +$as_echo "$have_ld_version_script" >&6; } +fi + if test "$have_ld_version_script" = "yes"; then + HAVE_LD_VERSION_SCRIPT_TRUE= + HAVE_LD_VERSION_SCRIPT_FALSE='#' +else + HAVE_LD_VERSION_SCRIPT_TRUE='#' + HAVE_LD_VERSION_SCRIPT_FALSE= +fi + + +# See if compiler supports prototypes. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for function prototypes" >&5 +$as_echo_n "checking for function prototypes... " >&6; } +if ${ijg_cv_have_prototypes+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int testfunction (int arg1, int * arg2); /* check prototypes */ +struct methods_struct { /* check method-pointer declarations */ + int (*error_exit) (char *msgtext); + int (*trace_message) (char *msgtext); + int (*another_method) (void); +}; +int testfunction (int arg1, int * arg2) /* check definitions */ +{ return arg2[arg1]; } +int test2function (void) /* check void arg list */ +{ return 0; } + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ijg_cv_have_prototypes=yes +else + ijg_cv_have_prototypes=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ijg_cv_have_prototypes" >&5 +$as_echo "$ijg_cv_have_prototypes" >&6; } +if test $ijg_cv_have_prototypes = yes; then + +$as_echo "#define HAVE_PROTOTYPES 1" >>confdefs.h + +else + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Your compiler does not seem to know about function prototypes. + Perhaps it needs a special switch to enable ANSI C mode. + If so, we recommend running configure like this: + ./configure CC='cc -switch' + where -switch is the proper switch." >&5 +$as_echo "$as_me: WARNING: Your compiler does not seem to know about function prototypes. + Perhaps it needs a special switch to enable ANSI C mode. + If so, we recommend running configure like this: + ./configure CC='cc -switch' + where -switch is the proper switch." >&2;} +fi + +# Check header files + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 +$as_echo_n "checking for grep that handles long lines and -e... " >&6; } +if ${ac_cv_path_GREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$GREP"; then + ac_path_GREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in grep ggrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_GREP" || continue +# Check for GNU ac_path_GREP and select it if it is found. + # Check for GNU $ac_path_GREP +case `"$ac_path_GREP" --version 2>&1` in +*GNU*) + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_GREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_GREP="$ac_path_GREP" + ac_path_GREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_GREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_GREP"; then + as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_GREP=$GREP +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 +$as_echo "$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 +$as_echo_n "checking for egrep... " >&6; } +if ${ac_cv_path_EGREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 + then ac_cv_path_EGREP="$GREP -E" + else + if test -z "$EGREP"; then + ac_path_EGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in egrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_EGREP" || continue +# Check for GNU ac_path_EGREP and select it if it is found. + # Check for GNU $ac_path_EGREP +case `"$ac_path_EGREP" --version 2>&1` in +*GNU*) + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_EGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP="$ac_path_EGREP" + ac_path_EGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_EGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_EGREP"; then + as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_EGREP=$EGREP +fi + + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 +$as_echo "$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if ${ac_cv_header_stdc+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include +#include + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_stdc=yes +else + ac_cv_header_stdc=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then : + : +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + +else + ac_cv_header_stdc=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then + +$as_echo "#define STDC_HEADERS 1" >>confdefs.h + +fi + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default +" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + +for ac_header in stddef.h stdlib.h locale.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + +ac_fn_c_check_header_mongrel "$LINENO" "string.h" "ac_cv_header_string_h" "$ac_includes_default" +if test "x$ac_cv_header_string_h" = xyes; then : + +else + +$as_echo "#define NEED_BSD_STRINGS 1" >>confdefs.h + +fi + + + +# See whether type size_t is defined in any ANSI-standard places; +# if not, perhaps it is defined in . +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for size_t" >&5 +$as_echo_n "checking for size_t... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#ifdef HAVE_STDDEF_H +#include +#endif +#ifdef HAVE_STDLIB_H +#include +#endif +#include +#ifdef NEED_BSD_STRINGS +#include +#else +#include +#endif +typedef size_t my_size_t; + +int +main () +{ + my_size_t foovar; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ijg_size_t_ok=yes +else + ijg_size_t_ok="not ANSI, perhaps it is in sys/types.h" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ijg_size_t_ok" >&5 +$as_echo "$ijg_size_t_ok" >&6; } +if test "$ijg_size_t_ok" != yes; then + ac_fn_c_check_header_mongrel "$LINENO" "sys/types.h" "ac_cv_header_sys_types_h" "$ac_includes_default" +if test "x$ac_cv_header_sys_types_h" = xyes; then : + +$as_echo "#define NEED_SYS_TYPES_H 1" >>confdefs.h + + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "size_t" >/dev/null 2>&1; then : + ijg_size_t_ok="size_t is in sys/types.h" +else + ijg_size_t_ok=no +fi +rm -f conftest* + +else + ijg_size_t_ok=no +fi + + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ijg_size_t_ok" >&5 +$as_echo "$ijg_size_t_ok" >&6; } + if test "$ijg_size_t_ok" = no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Type size_t is not defined in any of the usual places. + Try putting '\"typedef unsigned int size_t;\"' in jconfig.h." >&5 +$as_echo "$as_me: WARNING: Type size_t is not defined in any of the usual places. + Try putting '\"typedef unsigned int size_t;\"' in jconfig.h." >&2;} + fi +fi + +# Check compiler characteristics +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for type unsigned char" >&5 +$as_echo_n "checking for type unsigned char... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + unsigned char un_char; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +$as_echo "#define HAVE_UNSIGNED_CHAR 1" >>confdefs.h + +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for type unsigned short" >&5 +$as_echo_n "checking for type unsigned short... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + unsigned short un_short; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +$as_echo "#define HAVE_UNSIGNED_SHORT 1" >>confdefs.h + +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for type void" >&5 +$as_echo_n "checking for type void... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Caution: a C++ compiler will insist on valid prototypes */ +typedef void * void_ptr; /* check void * */ +#ifdef HAVE_PROTOTYPES /* check ptr to function returning void */ +typedef void (*void_func) (int a, int b); +#else +typedef void (*void_func) (); +#endif + +#ifdef HAVE_PROTOTYPES /* check void function result */ +void test3function (void_ptr arg1, void_func arg2) +#else +void test3function (arg1, arg2) + void_ptr arg1; + void_func arg2; +#endif +{ + char * locptr = (char *) arg1; /* check casting to and from void * */ + arg1 = (void *) locptr; + (*arg2) (1, 2); /* check call of fcn returning void */ +} + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +$as_echo "#define void char" >>confdefs.h + +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5 +$as_echo_n "checking for an ANSI C-conforming const... " >&6; } +if ${ac_cv_c_const+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + +#ifndef __cplusplus + /* Ultrix mips cc rejects this sort of thing. */ + typedef int charset[2]; + const charset cs = { 0, 0 }; + /* SunOS 4.1.1 cc rejects this. */ + char const *const *pcpcc; + char **ppc; + /* NEC SVR4.0.2 mips cc rejects this. */ + struct point {int x, y;}; + static struct point const zero = {0,0}; + /* AIX XL C 1.02.0.0 rejects this. + It does not let you subtract one const X* pointer from another in + an arm of an if-expression whose if-part is not a constant + expression */ + const char *g = "string"; + pcpcc = &g + (g ? g-g : 0); + /* HPUX 7.0 cc rejects these. */ + ++pcpcc; + ppc = (char**) pcpcc; + pcpcc = (char const *const *) ppc; + { /* SCO 3.2v4 cc rejects this sort of thing. */ + char tx; + char *t = &tx; + char const *s = 0 ? (char *) 0 : (char const *) 0; + + *t++ = 0; + if (s) return 0; + } + { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ + int x[] = {25, 17}; + const int *foo = &x[0]; + ++foo; + } + { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ + typedef const int *iptr; + iptr p = 0; + ++p; + } + { /* AIX XL C 1.02.0.0 rejects this sort of thing, saying + "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ + struct s { int j; const int *ap[3]; } bx; + struct s *b = &bx; b->j = 5; + } + { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ + const int foo = 10; + if (!foo) return 0; + } + return !cs[0] && !zero.x; +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_c_const=yes +else + ac_cv_c_const=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5 +$as_echo "$ac_cv_c_const" >&6; } +if test $ac_cv_c_const = no; then + +$as_echo "#define const /**/" >>confdefs.h + +fi + + +# Check for non-broken inline under various spellings +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inline" >&5 +$as_echo_n "checking for inline... " >&6; } +ijg_cv_inline="" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +} __inline__ int foo() { return 0; } +int bar() { return foo(); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ijg_cv_inline="__inline__" +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +} __inline int foo() { return 0; } +int bar() { return foo(); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ijg_cv_inline="__inline" +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +} inline int foo() { return 0; } +int bar() { return foo(); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ijg_cv_inline="inline" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ijg_cv_inline" >&5 +$as_echo "$ijg_cv_inline" >&6; } + +cat >>confdefs.h <<_ACEOF +#define INLINE $ijg_cv_inline +_ACEOF + + +# We cannot check for bogus warnings, but at least we can check for errors +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for broken incomplete types" >&5 +$as_echo_n "checking for broken incomplete types... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + typedef struct undefined_structure * undef_struct_ptr; +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 +$as_echo "ok" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: broken" >&5 +$as_echo "broken" >&6; } + +$as_echo "#define INCOMPLETE_TYPES_BROKEN 1" >>confdefs.h + +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +# Test whether global names are unique to at least 15 chars +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for short external names" >&5 +$as_echo_n "checking for short external names... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int possibly_duplicate_function () { return 0; } +int possibly_dupli_function () { return 1; } + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 +$as_echo "ok" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: short" >&5 +$as_echo "short" >&6; } + +$as_echo "#define NEED_SHORT_EXTERNAL_NAMES 1" >>confdefs.h + +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + +# Run-time checks +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking to see if char is signed" >&5 +$as_echo_n "checking to see if char is signed... " >&6; } +if test "$cross_compiling" = yes; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Assuming that char is signed on target machine. + If it is unsigned, this will be a little bit inefficient." >&5 +$as_echo "$as_me: WARNING: Assuming that char is signed on target machine. + If it is unsigned, this will be a little bit inefficient." >&2;} + +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#ifdef HAVE_STDLIB_H +#include +#endif +#include +#ifdef HAVE_PROTOTYPES +int is_char_signed (int arg) +#else +int is_char_signed (arg) + int arg; +#endif +{ + if (arg == 189) { /* expected result for unsigned char */ + return 0; /* type char is unsigned */ + } + else if (arg != -67) { /* expected result for signed char */ + printf("Hmm, it seems 'char' is not eight bits wide on your machine.\n"); + printf("I fear the JPEG software will not work at all.\n\n"); + } + return 1; /* assume char is signed otherwise */ +} +char signed_char_check = (char) (-67); +int main() { + exit(is_char_signed((int) signed_char_check)); +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +$as_echo "#define CHAR_IS_UNSIGNED 1" >>confdefs.h + +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking to see if right shift is signed" >&5 +$as_echo_n "checking to see if right shift is signed... " >&6; } +if test "$cross_compiling" = yes; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: Assuming that right shift is signed on target machine." >&5 +$as_echo "Assuming that right shift is signed on target machine." >&6; } +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#ifdef HAVE_STDLIB_H +#include +#endif +#include +#ifdef HAVE_PROTOTYPES +int is_shifting_signed (long arg) +#else +int is_shifting_signed (arg) + long arg; +#endif +/* See whether right-shift on a long is signed or not. */ +{ + long res = arg >> 4; + + if (res == -0x7F7E80CL) { /* expected result for signed shift */ + return 1; /* right shift is signed */ + } + /* see if unsigned-shift hack will fix it. */ + /* we can't just test exact value since it depends on width of long... */ + res |= (~0L) << (32-4); + if (res == -0x7F7E80CL) { /* expected result now? */ + return 0; /* right shift is unsigned */ + } + printf("Right shift isn't acting as I expect it to.\n"); + printf("I fear the JPEG software will not work at all.\n\n"); + return 0; /* try it with unsigned anyway */ +} +int main() { + exit(is_shifting_signed(-0x7F7E80B1L)); +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +$as_echo "#define RIGHT_SHIFT_IS_UNSIGNED 1" >>confdefs.h + +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking to see if fopen accepts b spec" >&5 +$as_echo_n "checking to see if fopen accepts b spec... " >&6; } +if test "$cross_compiling" = yes; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: Assuming that it does." >&5 +$as_echo "Assuming that it does." >&6; } +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#ifdef HAVE_STDLIB_H +#include +#endif +#include +int main() { + if (fopen("conftestdata", "wb") != NULL) + exit(0); + exit(1); +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +$as_echo "#define DONT_USE_B_MODE 1" >>confdefs.h + +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + + +# Configure libtool +enable_win32_dll=yes + +case $host in +*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. +set dummy ${ac_tool_prefix}as; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AS+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AS"; then + ac_cv_prog_AS="$AS" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AS="${ac_tool_prefix}as" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AS=$ac_cv_prog_AS +if test -n "$AS"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5 +$as_echo "$AS" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_AS"; then + ac_ct_AS=$AS + # Extract the first word of "as", so it can be a program name with args. +set dummy as; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_AS+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_AS"; then + ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_AS="as" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_AS=$ac_cv_prog_ac_ct_AS +if test -n "$ac_ct_AS"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5 +$as_echo "$ac_ct_AS" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_AS" = x; then + AS="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AS=$ac_ct_AS + fi +else + AS="$ac_cv_prog_AS" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. +set dummy ${ac_tool_prefix}dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DLLTOOL"; then + ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DLLTOOL=$ac_cv_prog_DLLTOOL +if test -n "$DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 +$as_echo "$DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_DLLTOOL"; then + ac_ct_DLLTOOL=$DLLTOOL + # Extract the first word of "dlltool", so it can be a program name with args. +set dummy dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DLLTOOL"; then + ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DLLTOOL="dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL +if test -n "$ac_ct_DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 +$as_echo "$ac_ct_DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_DLLTOOL" = x; then + DLLTOOL="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DLLTOOL=$ac_ct_DLLTOOL + fi +else + DLLTOOL="$ac_cv_prog_DLLTOOL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. +set dummy ${ac_tool_prefix}objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OBJDUMP"; then + ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OBJDUMP=$ac_cv_prog_OBJDUMP +if test -n "$OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 +$as_echo "$OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OBJDUMP"; then + ac_ct_OBJDUMP=$OBJDUMP + # Extract the first word of "objdump", so it can be a program name with args. +set dummy objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OBJDUMP"; then + ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OBJDUMP="objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP +if test -n "$ac_ct_OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 +$as_echo "$ac_ct_OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OBJDUMP" = x; then + OBJDUMP="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OBJDUMP=$ac_ct_OBJDUMP + fi +else + OBJDUMP="$ac_cv_prog_OBJDUMP" +fi + + ;; +esac + +test -z "$AS" && AS=as + + + + + +test -z "$DLLTOOL" && DLLTOOL=dlltool + + + + + +test -z "$OBJDUMP" && OBJDUMP=objdump + + + + + + + +case `pwd` in + *\ * | *\ *) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 +$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; +esac + + + +macro_version='2.4.6' +macro_revision='2.4.6' + + + + + + + + + + + + + +ltmain=$ac_aux_dir/ltmain.sh + +# Backslashify metacharacters that are still active within +# double-quoted strings. +sed_quote_subst='s/\(["`$\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' + +ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 +$as_echo_n "checking how to print strings... " >&6; } +# Test print first, because it will be a builtin if present. +if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' +elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='printf %s\n' +else + # Use this function as a fallback that always works. + func_fallback_echo () + { + eval 'cat <<_LTECHO_EOF +$1 +_LTECHO_EOF' + } + ECHO='func_fallback_echo' +fi + +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "" +} + +case $ECHO in + printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 +$as_echo "printf" >&6; } ;; + print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 +$as_echo "print -r" >&6; } ;; + *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 +$as_echo "cat" >&6; } ;; +esac + + + + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 +$as_echo_n "checking for a sed that does not truncate output... " >&6; } +if ${ac_cv_path_SED+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ + for ac_i in 1 2 3 4 5 6 7; do + ac_script="$ac_script$as_nl$ac_script" + done + echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed + { ac_script=; unset ac_script;} + if test -z "$SED"; then + ac_path_SED_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_SED" || continue +# Check for GNU ac_path_SED and select it if it is found. + # Check for GNU $ac_path_SED +case `"$ac_path_SED" --version 2>&1` in +*GNU*) + ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo '' >> "conftest.nl" + "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_SED_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_SED="$ac_path_SED" + ac_path_SED_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_SED_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_SED"; then + as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 + fi +else + ac_cv_path_SED=$SED +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 +$as_echo "$ac_cv_path_SED" >&6; } + SED="$ac_cv_path_SED" + rm -f conftest.sed + +test -z "$SED" && SED=sed +Xsed="$SED -e 1s/^X//" + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 +$as_echo_n "checking for fgrep... " >&6; } +if ${ac_cv_path_FGREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 + then ac_cv_path_FGREP="$GREP -F" + else + if test -z "$FGREP"; then + ac_path_FGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in fgrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_FGREP" || continue +# Check for GNU ac_path_FGREP and select it if it is found. + # Check for GNU $ac_path_FGREP +case `"$ac_path_FGREP" --version 2>&1` in +*GNU*) + ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'FGREP' >> "conftest.nl" + "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_FGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_FGREP="$ac_path_FGREP" + ac_path_FGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_FGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_FGREP"; then + as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_FGREP=$FGREP +fi + + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 +$as_echo "$ac_cv_path_FGREP" >&6; } + FGREP="$ac_cv_path_FGREP" + + +test -z "$GREP" && GREP=grep + + + + + + + + + + + + + + + + + + + +# Check whether --with-gnu-ld was given. +if test "${with_gnu_ld+set}" = set; then : + withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes +else + with_gnu_ld=no +fi + +ac_prog=ld +if test yes = "$GCC"; then + # Check if gcc -print-prog-name=ld gives a path. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 +$as_echo_n "checking for ld used by $CC... " >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return, which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [\\/]* | ?:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD=$ac_prog + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test yes = "$with_gnu_ld"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 +$as_echo_n "checking for GNU ld... " >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 +$as_echo_n "checking for non-GNU ld... " >&6; } +fi +if ${lt_cv_path_LD+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$LD"; then + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS=$lt_save_ifs + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD=$ac_dir/$ac_prog + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &5 +$as_echo "$LD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 +$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } +if ${lt_cv_prog_gnu_ld+:} false; then : + $as_echo_n "(cached) " >&6 +else + # I'd rather use --version here, but apparently some GNU lds only accept -v. +case `$LD -v 2>&1 &5 +$as_echo "$lt_cv_prog_gnu_ld" >&6; } +with_gnu_ld=$lt_cv_prog_gnu_ld + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 +$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } +if ${lt_cv_path_NM+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM=$NM +else + lt_nm_to_check=${ac_tool_prefix}nm + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" + fi + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS=$lt_save_ifs + test -z "$ac_dir" && ac_dir=. + tmp_nm=$ac_dir/$lt_tmp_nm + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the 'sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty + case $build_os in + mingw*) lt_bad_file=conftest.nm/nofile ;; + *) lt_bad_file=/dev/null ;; + esac + case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in + *$lt_bad_file* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break 2 + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break 2 + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + ;; + esac + fi + done + IFS=$lt_save_ifs + done + : ${lt_cv_path_NM=no} +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 +$as_echo "$lt_cv_path_NM" >&6; } +if test no != "$lt_cv_path_NM"; then + NM=$lt_cv_path_NM +else + # Didn't find any BSD compatible name lister, look for dumpbin. + if test -n "$DUMPBIN"; then : + # Let the user override the test. + else + if test -n "$ac_tool_prefix"; then + for ac_prog in dumpbin "link -dump" + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DUMPBIN+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DUMPBIN"; then + ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DUMPBIN=$ac_cv_prog_DUMPBIN +if test -n "$DUMPBIN"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 +$as_echo "$DUMPBIN" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$DUMPBIN" && break + done +fi +if test -z "$DUMPBIN"; then + ac_ct_DUMPBIN=$DUMPBIN + for ac_prog in dumpbin "link -dump" +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DUMPBIN"; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN +if test -n "$ac_ct_DUMPBIN"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 +$as_echo "$ac_ct_DUMPBIN" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_DUMPBIN" && break +done + + if test "x$ac_ct_DUMPBIN" = x; then + DUMPBIN=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DUMPBIN=$ac_ct_DUMPBIN + fi +fi + + case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in + *COFF*) + DUMPBIN="$DUMPBIN -symbols -headers" + ;; + *) + DUMPBIN=: + ;; + esac + fi + + if test : != "$DUMPBIN"; then + NM=$DUMPBIN + fi +fi +test -z "$NM" && NM=nm + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 +$as_echo_n "checking the name lister ($NM) interface... " >&6; } +if ${lt_cv_nm_interface+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_nm_interface="BSD nm" + echo "int some_variable = 0;" > conftest.$ac_ext + (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) + (eval "$ac_compile" 2>conftest.err) + cat conftest.err >&5 + (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) + cat conftest.err >&5 + (eval echo "\"\$as_me:$LINENO: output\"" >&5) + cat conftest.out >&5 + if $GREP 'External.*some_variable' conftest.out > /dev/null; then + lt_cv_nm_interface="MS dumpbin" + fi + rm -f conftest* +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 +$as_echo "$lt_cv_nm_interface" >&6; } + +# find the maximum length of command line arguments +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 +$as_echo_n "checking the maximum length of command line arguments... " >&6; } +if ${lt_cv_sys_max_cmd_len+:} false; then : + $as_echo_n "(cached) " >&6 +else + i=0 + teststring=ABCD + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw* | cegcc*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + mint*) + # On MiNT this can take a long time and run out of memory. + lt_cv_sys_max_cmd_len=8192; + ;; + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; + + os2*) + # The test takes a long time on OS/2. + lt_cv_sys_max_cmd_len=8192 + ;; + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) + lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` + if test -n "$lt_cv_sys_max_cmd_len" && \ + test undefined != "$lt_cv_sys_max_cmd_len"; then + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + else + # Make teststring a little bigger before we do anything with it. + # a 1K string should be a reasonable start. + for i in 1 2 3 4 5 6 7 8; do + teststring=$teststring$teststring + done + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while { test X`env echo "$teststring$teststring" 2>/dev/null` \ + = "X$teststring$teststring"; } >/dev/null 2>&1 && + test 17 != "$i" # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + # Only check the string length outside the loop. + lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` + teststring= + # Add a significant safety factor because C++ compilers can tack on + # massive amounts of additional arguments before passing them to the + # linker. It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + fi + ;; + esac + +fi + +if test -n "$lt_cv_sys_max_cmd_len"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 +$as_echo "$lt_cv_sys_max_cmd_len" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 +$as_echo "none" >&6; } +fi +max_cmd_len=$lt_cv_sys_max_cmd_len + + + + + + +: ${CP="cp -f"} +: ${MV="mv -f"} +: ${RM="rm -f"} + +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + lt_unset=unset +else + lt_unset=false +fi + + + + + +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + lt_SP2NL='tr \040 \012' + lt_NL2SP='tr \015\012 \040\040' + ;; + *) # EBCDIC based system + lt_SP2NL='tr \100 \n' + lt_NL2SP='tr \r\n \100\100' + ;; +esac + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 +$as_echo_n "checking how to convert $build file names to $host format... " >&6; } +if ${lt_cv_to_host_file_cmd+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 + ;; + esac + ;; + *-*-cygwin* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin + ;; + esac + ;; + * ) # unhandled hosts (and "normal" native builds) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; +esac + +fi + +to_host_file_cmd=$lt_cv_to_host_file_cmd +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 +$as_echo "$lt_cv_to_host_file_cmd" >&6; } + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 +$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } +if ${lt_cv_to_tool_file_cmd+:} false; then : + $as_echo_n "(cached) " >&6 +else + #assume ordinary cross tools, or native build. +lt_cv_to_tool_file_cmd=func_convert_file_noop +case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 + ;; + esac + ;; +esac + +fi + +to_tool_file_cmd=$lt_cv_to_tool_file_cmd +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 +$as_echo "$lt_cv_to_tool_file_cmd" >&6; } + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 +$as_echo_n "checking for $LD option to reload object files... " >&6; } +if ${lt_cv_ld_reload_flag+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_reload_flag='-r' +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 +$as_echo "$lt_cv_ld_reload_flag" >&6; } +reload_flag=$lt_cv_ld_reload_flag +case $reload_flag in +"" | " "*) ;; +*) reload_flag=" $reload_flag" ;; +esac +reload_cmds='$LD$reload_flag -o $output$reload_objs' +case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + if test yes != "$GCC"; then + reload_cmds=false + fi + ;; + darwin*) + if test yes = "$GCC"; then + reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs' + else + reload_cmds='$LD$reload_flag -o $output$reload_objs' + fi + ;; +esac + + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. +set dummy ${ac_tool_prefix}objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OBJDUMP"; then + ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OBJDUMP=$ac_cv_prog_OBJDUMP +if test -n "$OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 +$as_echo "$OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OBJDUMP"; then + ac_ct_OBJDUMP=$OBJDUMP + # Extract the first word of "objdump", so it can be a program name with args. +set dummy objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OBJDUMP"; then + ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OBJDUMP="objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP +if test -n "$ac_ct_OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 +$as_echo "$ac_ct_OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OBJDUMP" = x; then + OBJDUMP="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OBJDUMP=$ac_ct_OBJDUMP + fi +else + OBJDUMP="$ac_cv_prog_OBJDUMP" +fi + +test -z "$OBJDUMP" && OBJDUMP=objdump + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 +$as_echo_n "checking how to recognize dependent libraries... " >&6; } +if ${lt_cv_deplibs_check_method+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# 'unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [[regex]]' -- check by looking for files in library path +# that responds to the $file_magic_cmd with a given extended regex. +# If you have 'file' or equivalent on your system and you're not sure +# whether 'pass_all' will *always* work, you probably want this one. + +case $host_os in +aix[4-9]*) + lt_cv_deplibs_check_method=pass_all + ;; + +beos*) + lt_cv_deplibs_check_method=pass_all + ;; + +bsdi[45]*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; + +cygwin*) + # func_win32_libid is a shell function defined in ltmain.sh + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + ;; + +mingw* | pw32*) + # Base MSYS/MinGW do not provide the 'file' command needed by + # func_win32_libid shell function, so use a weaker test based on 'objdump', + # unless we find 'file', for example because we are cross-compiling. + if ( file / ) >/dev/null 2>&1; then + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else + # Keep this pattern in sync with the one in func_win32_libid. + lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; + +cegcc*) + # use the weaker test based on 'objdump'. See mingw*. + lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; + +freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +haiku*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +interix[3-9]*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' + ;; + +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +*nto* | *qnx*) + lt_cv_deplibs_check_method=pass_all + ;; + +openbsd* | bitrig*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + fi + ;; + +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; + +rdos*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +tpf*) + lt_cv_deplibs_check_method=pass_all + ;; +os2*) + lt_cv_deplibs_check_method=pass_all + ;; +esac + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 +$as_echo "$lt_cv_deplibs_check_method" >&6; } + +file_magic_glob= +want_nocaseglob=no +if test "$build" = "$host"; then + case $host_os in + mingw* | pw32*) + if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then + want_nocaseglob=yes + else + file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"` + fi + ;; + esac +fi + +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown + + + + + + + + + + + + + + + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. +set dummy ${ac_tool_prefix}dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DLLTOOL"; then + ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DLLTOOL=$ac_cv_prog_DLLTOOL +if test -n "$DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 +$as_echo "$DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_DLLTOOL"; then + ac_ct_DLLTOOL=$DLLTOOL + # Extract the first word of "dlltool", so it can be a program name with args. +set dummy dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DLLTOOL"; then + ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DLLTOOL="dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL +if test -n "$ac_ct_DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 +$as_echo "$ac_ct_DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_DLLTOOL" = x; then + DLLTOOL="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DLLTOOL=$ac_ct_DLLTOOL + fi +else + DLLTOOL="$ac_cv_prog_DLLTOOL" +fi + +test -z "$DLLTOOL" && DLLTOOL=dlltool + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 +$as_echo_n "checking how to associate runtime and link libraries... " >&6; } +if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_sharedlib_from_linklib_cmd='unknown' + +case $host_os in +cygwin* | mingw* | pw32* | cegcc*) + # two different shell functions defined in ltmain.sh; + # decide which one to use based on capabilities of $DLLTOOL + case `$DLLTOOL --help 2>&1` in + *--identify-strict*) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib + ;; + *) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback + ;; + esac + ;; +*) + # fallback: assume linklib IS sharedlib + lt_cv_sharedlib_from_linklib_cmd=$ECHO + ;; +esac + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 +$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } +sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd +test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO + + + + + + + +if test -n "$ac_tool_prefix"; then + for ac_prog in ar + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AR="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AR=$ac_cv_prog_AR +if test -n "$AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 +$as_echo "$AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AR" && break + done +fi +if test -z "$AR"; then + ac_ct_AR=$AR + for ac_prog in ar +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_AR="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_AR=$ac_cv_prog_ac_ct_AR +if test -n "$ac_ct_AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 +$as_echo "$ac_ct_AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_AR" && break +done + + if test "x$ac_ct_AR" = x; then + AR="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AR=$ac_ct_AR + fi +fi + +: ${AR=ar} +: ${AR_FLAGS=cru} + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 +$as_echo_n "checking for archiver @FILE support... " >&6; } +if ${lt_cv_ar_at_file+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ar_at_file=no + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + echo conftest.$ac_objext > conftest.lst + lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' + { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 + (eval $lt_ar_try) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if test 0 -eq "$ac_status"; then + # Ensure the archiver fails upon bogus file names. + rm -f conftest.$ac_objext libconftest.a + { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 + (eval $lt_ar_try) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if test 0 -ne "$ac_status"; then + lt_cv_ar_at_file=@ + fi + fi + rm -f conftest.* libconftest.a + +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 +$as_echo "$lt_cv_ar_at_file" >&6; } + +if test no = "$lt_cv_ar_at_file"; then + archiver_list_spec= +else + archiver_list_spec=$lt_cv_ar_at_file +fi + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +test -z "$STRIP" && STRIP=: + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_RANLIB+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 +$as_echo "$RANLIB" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 +$as_echo "$ac_ct_RANLIB" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_RANLIB" = x; then + RANLIB=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + RANLIB=$ac_ct_RANLIB + fi +else + RANLIB="$ac_cv_prog_RANLIB" +fi + +test -z "$RANLIB" && RANLIB=: + + + + + + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + bitrig* | openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" +fi + +case $host_os in + darwin*) + lock_old_archive_extraction=yes ;; + *) + lock_old_archive_extraction=no ;; +esac + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# Check for command to grab the raw symbol name followed by C symbol from nm. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 +$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } +if ${lt_cv_sys_global_symbol_pipe+:} false; then : + $as_echo_n "(cached) " >&6 +else + +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[BCDEGRST]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([_A-Za-z][_A-Za-z0-9]*\)' + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[BCDT]' + ;; +cygwin* | mingw* | pw32* | cegcc*) + symcode='[ABCDGISTW]' + ;; +hpux*) + if test ia64 = "$host_cpu"; then + symcode='[ABCDEGRST]' + fi + ;; +irix* | nonstopux*) + symcode='[BCDEGRST]' + ;; +osf*) + symcode='[BCDEGQRST]' + ;; +solaris*) + symcode='[BDRT]' + ;; +sco3.2v5*) + symcode='[DT]' + ;; +sysv4.2uw2*) + symcode='[DT]' + ;; +sysv5* | sco5v6* | unixware* | OpenUNIX*) + symcode='[ABDT]' + ;; +sysv4) + symcode='[DFNSTU]' + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[ABCDGIRSTW]' ;; +esac + +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Gets list of data symbols to import. + lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'" + # Adjust the below global symbol transforms to fixup imported variables. + lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'" + lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'" + lt_c_name_lib_hook="\ + -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\ + -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'" +else + # Disable hooks by default. + lt_cv_sys_global_symbol_to_import= + lt_cdecl_hook= + lt_c_name_hook= + lt_c_name_lib_hook= +fi + +# Transform an extracted symbol line into a proper C declaration. +# Some systems (esp. on ia64) link data and code symbols differently, +# so use this general approach. +lt_cv_sys_global_symbol_to_cdecl="sed -n"\ +$lt_cdecl_hook\ +" -e 's/^T .* \(.*\)$/extern int \1();/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n"\ +$lt_c_name_hook\ +" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'" + +# Transform an extracted symbol line into symbol name with lib prefix and +# symbol address. +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\ +$lt_c_name_lib_hook\ +" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ +" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'" + +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# Try without a prefix underscore, then with it. +for ac_symprfx in "" "_"; do + + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" + + # Write the raw and C identifiers. + if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Fake it for dumpbin and say T for any non-static function, + # D for any global variable and I for any imported variable. + # Also find C++ and __fastcall symbols from MSVC++, + # which start with @ or ?. + lt_cv_sys_global_symbol_pipe="$AWK '"\ +" {last_section=section; section=\$ 3};"\ +" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ +" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\ +" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\ +" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\ +" \$ 0!~/External *\|/{next};"\ +" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ +" {if(hide[section]) next};"\ +" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\ +" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\ +" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\ +" ' prfx=^$ac_symprfx" + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi + lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext <<_LT_EOF +#ifdef __cplusplus +extern "C" { +#endif +char nm_test_var; +void nm_test_func(void); +void nm_test_func(void){} +#ifdef __cplusplus +} +#endif +int main(){nm_test_var='a';nm_test_func();return(0);} +_LT_EOF + + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + # Now try to grab the symbols. + nlist=conftest.nm + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5 + (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE +/* DATA imports from DLLs on WIN32 can't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT_DLSYM_CONST +#elif defined __osf__ +/* This system does not cope well with relocations in const data. */ +# define LT_DLSYM_CONST +#else +# define LT_DLSYM_CONST const +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +_LT_EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' + + cat <<_LT_EOF >> conftest.$ac_ext + +/* The mapping between symbol names and symbols. */ +LT_DLSYM_CONST struct { + const char *name; + void *address; +} +lt__PROGRAM__LTX_preloaded_symbols[] = +{ + { "@PROGRAM@", (void *) 0 }, +_LT_EOF + $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + cat <<\_LT_EOF >> conftest.$ac_ext + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt__PROGRAM__LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif +_LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_globsym_save_LIBS=$LIBS + lt_globsym_save_CFLAGS=$CFLAGS + LIBS=conftstm.$ac_objext + CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest$ac_exeext; then + pipe_works=yes + fi + LIBS=$lt_globsym_save_LIBS + CFLAGS=$lt_globsym_save_CFLAGS + else + echo "cannot find nm_test_func in $nlist" >&5 + fi + else + echo "cannot find nm_test_var in $nlist" >&5 + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 + fi + else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + fi + rm -rf conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test yes = "$pipe_works"; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done + +fi + +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 +$as_echo "failed" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 +$as_echo "ok" >&6; } +fi + +# Response file support. +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + nm_file_list_spec='@' +elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then + nm_file_list_spec='@' +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 +$as_echo_n "checking for sysroot... " >&6; } + +# Check whether --with-sysroot was given. +if test "${with_sysroot+set}" = set; then : + withval=$with_sysroot; +else + with_sysroot=no +fi + + +lt_sysroot= +case $with_sysroot in #( + yes) + if test yes = "$GCC"; then + lt_sysroot=`$CC --print-sysroot 2>/dev/null` + fi + ;; #( + /*) + lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` + ;; #( + no|'') + ;; #( + *) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_sysroot" >&5 +$as_echo "$with_sysroot" >&6; } + as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 + ;; +esac + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 +$as_echo "${lt_sysroot:-no}" >&6; } + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a working dd" >&5 +$as_echo_n "checking for a working dd... " >&6; } +if ${ac_cv_path_lt_DD+:} false; then : + $as_echo_n "(cached) " >&6 +else + printf 0123456789abcdef0123456789abcdef >conftest.i +cat conftest.i conftest.i >conftest2.i +: ${lt_DD:=$DD} +if test -z "$lt_DD"; then + ac_path_lt_DD_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in dd; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_lt_DD="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_lt_DD" || continue +if "$ac_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then + cmp -s conftest.i conftest.out \ + && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=: +fi + $ac_path_lt_DD_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_lt_DD"; then + : + fi +else + ac_cv_path_lt_DD=$lt_DD +fi + +rm -f conftest.i conftest2.i conftest.out +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_lt_DD" >&5 +$as_echo "$ac_cv_path_lt_DD" >&6; } + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to truncate binary pipes" >&5 +$as_echo_n "checking how to truncate binary pipes... " >&6; } +if ${lt_cv_truncate_bin+:} false; then : + $as_echo_n "(cached) " >&6 +else + printf 0123456789abcdef0123456789abcdef >conftest.i +cat conftest.i conftest.i >conftest2.i +lt_cv_truncate_bin= +if "$ac_cv_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then + cmp -s conftest.i conftest.out \ + && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1" +fi +rm -f conftest.i conftest2.i conftest.out +test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q" +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_truncate_bin" >&5 +$as_echo "$lt_cv_truncate_bin" >&6; } + + + + + + + +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +func_cc_basename () +{ + for cc_temp in $*""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac + done + func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +} + +# Check whether --enable-libtool-lock was given. +if test "${enable_libtool_lock+set}" = set; then : + enableval=$enable_libtool_lock; +fi + +test no = "$enable_libtool_lock" || enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out what ABI is being produced by ac_compile, and set mode + # options accordingly. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE=32 + ;; + *ELF-64*) + HPUX_IA64_MODE=64 + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. + echo '#line '$LINENO' "configure"' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + if test yes = "$lt_cv_prog_gnu_ld"; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +mips64*-*linux*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. + echo '#line '$LINENO' "configure"' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + emul=elf + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + emul="${emul}32" + ;; + *64-bit*) + emul="${emul}64" + ;; + esac + case `/usr/bin/file conftest.$ac_objext` in + *MSB*) + emul="${emul}btsmip" + ;; + *LSB*) + emul="${emul}ltsmip" + ;; + esac + case `/usr/bin/file conftest.$ac_objext` in + *N32*) + emul="${emul}n32" + ;; + esac + LD="${LD-ld} -m $emul" + fi + rm -rf conftest* + ;; + +x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \ +s390*-*linux*|s390*-*tpf*|sparc*-*linux*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. Note that the listed cases only cover the + # situations where additional linker options are needed (such as when + # doing 32-bit compilation for a host where ld defaults to 64-bit, or + # vice versa); the common cases where no linker options are needed do + # not appear in the list. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_i386_fbsd" + ;; + x86_64-*linux*) + case `/usr/bin/file conftest.o` in + *x86-64*) + LD="${LD-ld} -m elf32_x86_64" + ;; + *) + LD="${LD-ld} -m elf_i386" + ;; + esac + ;; + powerpc64le-*linux*) + LD="${LD-ld} -m elf32lppclinux" + ;; + powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_x86_64_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + powerpcle-*linux*) + LD="${LD-ld} -m elf64lppc" + ;; + powerpc-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*|s390*-*tpf*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS=$CFLAGS + CFLAGS="$CFLAGS -belf" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 +$as_echo_n "checking whether the C compiler needs -belf... " >&6; } +if ${lt_cv_cc_needs_belf+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_cc_needs_belf=yes +else + lt_cv_cc_needs_belf=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 +$as_echo "$lt_cv_cc_needs_belf" >&6; } + if test yes != "$lt_cv_cc_needs_belf"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS=$SAVE_CFLAGS + fi + ;; +*-*solaris*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) + case $host in + i?86-*-solaris*|x86_64-*-solaris*) + LD="${LD-ld} -m elf_x86_64" + ;; + sparc*-*-solaris*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + # GNU ld 2.21 introduced _sol2 emulations. Use them if available. + if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then + LD=${LD-ld}_sol2 + fi + ;; + *) + if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then + LD="${LD-ld} -64" + fi + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; +esac + +need_locks=$enable_libtool_lock + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. +set dummy ${ac_tool_prefix}mt; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_MANIFEST_TOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$MANIFEST_TOOL"; then + ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL +if test -n "$MANIFEST_TOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 +$as_echo "$MANIFEST_TOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_MANIFEST_TOOL"; then + ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL + # Extract the first word of "mt", so it can be a program name with args. +set dummy mt; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_MANIFEST_TOOL"; then + ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL +if test -n "$ac_ct_MANIFEST_TOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 +$as_echo "$ac_ct_MANIFEST_TOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_MANIFEST_TOOL" = x; then + MANIFEST_TOOL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL + fi +else + MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" +fi + +test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 +$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } +if ${lt_cv_path_mainfest_tool+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_path_mainfest_tool=no + echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 + $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out + cat conftest.err >&5 + if $GREP 'Manifest Tool' conftest.out > /dev/null; then + lt_cv_path_mainfest_tool=yes + fi + rm -f conftest* +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 +$as_echo "$lt_cv_path_mainfest_tool" >&6; } +if test yes != "$lt_cv_path_mainfest_tool"; then + MANIFEST_TOOL=: +fi + + + + + + + case $host_os in + rhapsody* | darwin*) + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. +set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DSYMUTIL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DSYMUTIL"; then + ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DSYMUTIL=$ac_cv_prog_DSYMUTIL +if test -n "$DSYMUTIL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 +$as_echo "$DSYMUTIL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_DSYMUTIL"; then + ac_ct_DSYMUTIL=$DSYMUTIL + # Extract the first word of "dsymutil", so it can be a program name with args. +set dummy dsymutil; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DSYMUTIL"; then + ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL +if test -n "$ac_ct_DSYMUTIL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 +$as_echo "$ac_ct_DSYMUTIL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_DSYMUTIL" = x; then + DSYMUTIL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DSYMUTIL=$ac_ct_DSYMUTIL + fi +else + DSYMUTIL="$ac_cv_prog_DSYMUTIL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. +set dummy ${ac_tool_prefix}nmedit; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_NMEDIT+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$NMEDIT"; then + ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +NMEDIT=$ac_cv_prog_NMEDIT +if test -n "$NMEDIT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 +$as_echo "$NMEDIT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_NMEDIT"; then + ac_ct_NMEDIT=$NMEDIT + # Extract the first word of "nmedit", so it can be a program name with args. +set dummy nmedit; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_NMEDIT"; then + ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_NMEDIT="nmedit" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT +if test -n "$ac_ct_NMEDIT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 +$as_echo "$ac_ct_NMEDIT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_NMEDIT" = x; then + NMEDIT=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + NMEDIT=$ac_ct_NMEDIT + fi +else + NMEDIT="$ac_cv_prog_NMEDIT" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. +set dummy ${ac_tool_prefix}lipo; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_LIPO+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$LIPO"; then + ac_cv_prog_LIPO="$LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_LIPO="${ac_tool_prefix}lipo" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +LIPO=$ac_cv_prog_LIPO +if test -n "$LIPO"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 +$as_echo "$LIPO" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_LIPO"; then + ac_ct_LIPO=$LIPO + # Extract the first word of "lipo", so it can be a program name with args. +set dummy lipo; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_LIPO+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_LIPO"; then + ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_LIPO="lipo" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO +if test -n "$ac_ct_LIPO"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 +$as_echo "$ac_ct_LIPO" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_LIPO" = x; then + LIPO=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + LIPO=$ac_ct_LIPO + fi +else + LIPO="$ac_cv_prog_LIPO" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OTOOL"; then + ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OTOOL="${ac_tool_prefix}otool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OTOOL=$ac_cv_prog_OTOOL +if test -n "$OTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 +$as_echo "$OTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OTOOL"; then + ac_ct_OTOOL=$OTOOL + # Extract the first word of "otool", so it can be a program name with args. +set dummy otool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OTOOL"; then + ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OTOOL="otool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL +if test -n "$ac_ct_OTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 +$as_echo "$ac_ct_OTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OTOOL" = x; then + OTOOL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL=$ac_ct_OTOOL + fi +else + OTOOL="$ac_cv_prog_OTOOL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool64; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OTOOL64+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OTOOL64"; then + ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OTOOL64=$ac_cv_prog_OTOOL64 +if test -n "$OTOOL64"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 +$as_echo "$OTOOL64" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OTOOL64"; then + ac_ct_OTOOL64=$OTOOL64 + # Extract the first word of "otool64", so it can be a program name with args. +set dummy otool64; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OTOOL64"; then + ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OTOOL64="otool64" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 +if test -n "$ac_ct_OTOOL64"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 +$as_echo "$ac_ct_OTOOL64" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OTOOL64" = x; then + OTOOL64=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL64=$ac_ct_OTOOL64 + fi +else + OTOOL64="$ac_cv_prog_OTOOL64" +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 +$as_echo_n "checking for -single_module linker flag... " >&6; } +if ${lt_cv_apple_cc_single_mod+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_apple_cc_single_mod=no + if test -z "$LT_MULTI_MODULE"; then + # By default we will add the -single_module flag. You can override + # by either setting the environment variable LT_MULTI_MODULE + # non-empty at configure time, or by adding -multi_module to the + # link flags. + rm -rf libconftest.dylib* + echo "int foo(void){return 1;}" > conftest.c + echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +-dynamiclib -Wl,-single_module conftest.c" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ + -dynamiclib -Wl,-single_module conftest.c 2>conftest.err + _lt_result=$? + # If there is a non-empty error log, and "single_module" + # appears in it, assume the flag caused a linker warning + if test -s conftest.err && $GREP single_module conftest.err; then + cat conftest.err >&5 + # Otherwise, if the output was created with a 0 exit code from + # the compiler, it worked. + elif test -f libconftest.dylib && test 0 = "$_lt_result"; then + lt_cv_apple_cc_single_mod=yes + else + cat conftest.err >&5 + fi + rm -rf libconftest.dylib* + rm -f conftest.* + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 +$as_echo "$lt_cv_apple_cc_single_mod" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 +$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } +if ${lt_cv_ld_exported_symbols_list+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_ld_exported_symbols_list=yes +else + lt_cv_ld_exported_symbols_list=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 +$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 +$as_echo_n "checking for -force_load linker flag... " >&6; } +if ${lt_cv_ld_force_load+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_force_load=no + cat > conftest.c << _LT_EOF +int forced_loaded() { return 2;} +_LT_EOF + echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 + echo "$AR cru libconftest.a conftest.o" >&5 + $AR cru libconftest.a conftest.o 2>&5 + echo "$RANLIB libconftest.a" >&5 + $RANLIB libconftest.a 2>&5 + cat > conftest.c << _LT_EOF +int main() { return 0;} +_LT_EOF + echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err + _lt_result=$? + if test -s conftest.err && $GREP force_load conftest.err; then + cat conftest.err >&5 + elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then + lt_cv_ld_force_load=yes + else + cat conftest.err >&5 + fi + rm -f conftest.err libconftest.a conftest conftest.c + rm -rf conftest.dSYM + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 +$as_echo "$lt_cv_ld_force_load" >&6; } + case $host_os in + rhapsody* | darwin1.[012]) + _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;; + darwin1.*) + _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; + darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*86*-darwin8*|10.0,*-darwin[91]*) + _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; + 10.[012][,.]*) + _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; + 10.*) + _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; + esac + ;; + esac + if test yes = "$lt_cv_apple_cc_single_mod"; then + _lt_dar_single_mod='$single_module' + fi + if test yes = "$lt_cv_ld_exported_symbols_list"; then + _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym' + else + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib' + fi + if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then + _lt_dsymutil='~$DSYMUTIL $lib || :' + else + _lt_dsymutil= + fi + ;; + esac + +# func_munge_path_list VARIABLE PATH +# ----------------------------------- +# VARIABLE is name of variable containing _space_ separated list of +# directories to be munged by the contents of PATH, which is string +# having a format: +# "DIR[:DIR]:" +# string "DIR[ DIR]" will be prepended to VARIABLE +# ":DIR[:DIR]" +# string "DIR[ DIR]" will be appended to VARIABLE +# "DIRP[:DIRP]::[DIRA:]DIRA" +# string "DIRP[ DIRP]" will be prepended to VARIABLE and string +# "DIRA[ DIRA]" will be appended to VARIABLE +# "DIR[:DIR]" +# VARIABLE will be replaced by "DIR[ DIR]" +func_munge_path_list () +{ + case x$2 in + x) + ;; + *:) + eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\" + ;; + x:*) + eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\" + ;; + *::*) + eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" + eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\" + ;; + *) + eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\" + ;; + esac +} + +for ac_header in dlfcn.h +do : + ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default +" +if test "x$ac_cv_header_dlfcn_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_DLFCN_H 1 +_ACEOF + +fi + +done + + + + + +# Set options + + + + enable_dlopen=no + + + + # Check whether --enable-shared was given. +if test "${enable_shared+set}" = set; then : + enableval=$enable_shared; p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for pkg in $enableval; do + IFS=$lt_save_ifs + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS=$lt_save_ifs + ;; + esac +else + enable_shared=yes +fi + + + + + + + + + + # Check whether --enable-static was given. +if test "${enable_static+set}" = set; then : + enableval=$enable_static; p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for pkg in $enableval; do + IFS=$lt_save_ifs + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS=$lt_save_ifs + ;; + esac +else + enable_static=yes +fi + + + + + + + + + + +# Check whether --with-pic was given. +if test "${with_pic+set}" = set; then : + withval=$with_pic; lt_p=${PACKAGE-default} + case $withval in + yes|no) pic_mode=$withval ;; + *) + pic_mode=default + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for lt_pkg in $withval; do + IFS=$lt_save_ifs + if test "X$lt_pkg" = "X$lt_p"; then + pic_mode=yes + fi + done + IFS=$lt_save_ifs + ;; + esac +else + pic_mode=default +fi + + + + + + + + + # Check whether --enable-fast-install was given. +if test "${enable_fast_install+set}" = set; then : + enableval=$enable_fast_install; p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for pkg in $enableval; do + IFS=$lt_save_ifs + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS=$lt_save_ifs + ;; + esac +else + enable_fast_install=yes +fi + + + + + + + + + shared_archive_member_spec= +case $host,$enable_shared in +power*-*-aix[5-9]*,yes) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking which variant of shared library versioning to provide" >&5 +$as_echo_n "checking which variant of shared library versioning to provide... " >&6; } + +# Check whether --with-aix-soname was given. +if test "${with_aix_soname+set}" = set; then : + withval=$with_aix_soname; case $withval in + aix|svr4|both) + ;; + *) + as_fn_error $? "Unknown argument to --with-aix-soname" "$LINENO" 5 + ;; + esac + lt_cv_with_aix_soname=$with_aix_soname +else + if ${lt_cv_with_aix_soname+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_with_aix_soname=aix +fi + + with_aix_soname=$lt_cv_with_aix_soname +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_aix_soname" >&5 +$as_echo "$with_aix_soname" >&6; } + if test aix != "$with_aix_soname"; then + # For the AIX way of multilib, we name the shared archive member + # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o', + # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File. + # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag, + # the AIX toolchain works better with OBJECT_MODE set (default 32). + if test 64 = "${OBJECT_MODE-32}"; then + shared_archive_member_spec=shr_64 + else + shared_archive_member_spec=shr + fi + fi + ;; +*) + with_aix_soname=aix + ;; +esac + + + + + + + + + + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS=$ltmain + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +test -z "$LN_S" && LN_S="ln -s" + + + + + + + + + + + + + + +if test -n "${ZSH_VERSION+set}"; then + setopt NO_GLOB_SUBST +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 +$as_echo_n "checking for objdir... " >&6; } +if ${lt_cv_objdir+:} false; then : + $as_echo_n "(cached) " >&6 +else + rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 +$as_echo "$lt_cv_objdir" >&6; } +objdir=$lt_cv_objdir + + + + + +cat >>confdefs.h <<_ACEOF +#define LT_OBJDIR "$lt_cv_objdir/" +_ACEOF + + + + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test set != "${COLLECT_NAMES+set}"; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Global variables: +ofile=libtool +can_build_shared=yes + +# All known linkers require a '.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a + +with_gnu_ld=$lt_cv_prog_gnu_ld + +old_CC=$CC +old_CFLAGS=$CFLAGS + +# Set sane defaults for various variables +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +test -z "$LD" && LD=ld +test -z "$ac_objext" && ac_objext=o + +func_cc_basename $compiler +cc_basename=$func_cc_basename_result + + +# Only perform the check for file, if the check method requires it +test -z "$MAGIC_CMD" && MAGIC_CMD=file +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 +$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } +if ${lt_cv_path_MAGIC_CMD+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD=$MAGIC_CMD + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS=$lt_save_ifs + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/${ac_tool_prefix}file"; then + lt_cv_path_MAGIC_CMD=$ac_dir/"${ac_tool_prefix}file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD=$lt_cv_path_MAGIC_CMD + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS=$lt_save_ifs + MAGIC_CMD=$lt_save_MAGIC_CMD + ;; +esac +fi + +MAGIC_CMD=$lt_cv_path_MAGIC_CMD +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + + + +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 +$as_echo_n "checking for file... " >&6; } +if ${lt_cv_path_MAGIC_CMD+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD=$MAGIC_CMD + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS=$lt_save_ifs + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/file"; then + lt_cv_path_MAGIC_CMD=$ac_dir/"file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD=$lt_cv_path_MAGIC_CMD + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS=$lt_save_ifs + MAGIC_CMD=$lt_save_MAGIC_CMD + ;; +esac +fi + +MAGIC_CMD=$lt_cv_path_MAGIC_CMD +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + else + MAGIC_CMD=: + fi +fi + + fi + ;; +esac + +# Use C for the default configuration in the libtool script + +lt_save_CC=$CC +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +objext=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}' + + + + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + +# Save the default compiler, since it gets overwritten when the other +# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. +compiler_DEFAULT=$CC + +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* + +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* + + +if test -n "$compiler"; then + +lt_prog_compiler_no_builtin_flag= + +if test yes = "$GCC"; then + case $cc_basename in + nvcc*) + lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; + *) + lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; + esac + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } +if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_rtti_exceptions=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="-fno-rtti -fno-exceptions" ## exclude from sc_useless_quotes_in_assignment + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_rtti_exceptions=yes + fi + fi + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } + +if test yes = "$lt_cv_prog_compiler_rtti_exceptions"; then + lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" +else + : +fi + +fi + + + + + + + lt_prog_compiler_wl= +lt_prog_compiler_pic= +lt_prog_compiler_static= + + + if test yes = "$GCC"; then + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_static='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test ia64 = "$host_cpu"; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + fi + lt_prog_compiler_pic='-fPIC' + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + lt_prog_compiler_pic='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the '-m68020' flag to GCC prevents building anything better, + # like '-m68040'. + lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + lt_prog_compiler_pic='-DDLL_EXPORT' + case $host_os in + os2*) + lt_prog_compiler_static='$wl-static' + ;; + esac + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic='-fno-common' + ;; + + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + lt_prog_compiler_static= + ;; + + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + ;; + + interix[3-9]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + lt_prog_compiler_can_build_shared=no + enable_shared=no + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic=-Kconform_pic + fi + ;; + + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + + case $cc_basename in + nvcc*) # Cuda Compiler Driver 2.2 + lt_prog_compiler_wl='-Xlinker ' + if test -n "$lt_prog_compiler_pic"; then + lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic" + fi + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + lt_prog_compiler_wl='-Wl,' + if test ia64 = "$host_cpu"; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + else + lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic='-fno-common' + case $cc_basename in + nagfor*) + # NAG Fortran compiler + lt_prog_compiler_wl='-Wl,-Wl,,' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + esac + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic='-DDLL_EXPORT' + case $host_os in + os2*) + lt_prog_compiler_static='$wl-static' + ;; + esac + ;; + + hpux9* | hpux10* | hpux11*) + lt_prog_compiler_wl='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + lt_prog_compiler_static='$wl-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + lt_prog_compiler_wl='-Wl,' + # PIC (with -KPIC) is the default. + lt_prog_compiler_static='-non_shared' + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) + case $cc_basename in + # old Intel for x86_64, which still supported -KPIC. + ecc*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-static' + ;; + # icc used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + icc* | ifort*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + # Lahey Fortran 8.1. + lf95*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='--shared' + lt_prog_compiler_static='--static' + ;; + nagfor*) + # NAG Fortran compiler + lt_prog_compiler_wl='-Wl,-Wl,,' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + tcc*) + # Fabrice Bellard et al's Tiny C Compiler + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; + ccc*) + lt_prog_compiler_wl='-Wl,' + # All Alpha code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + xl* | bgxl* | bgf* | mpixl*) + # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-qpic' + lt_prog_compiler_static='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='' + ;; + *Sun\ F* | *Sun*Fortran*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='-Qoption ld ' + ;; + *Sun\ C*) + # Sun C 5.9 + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='-Wl,' + ;; + *Intel*\ [CF]*Compiler*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + *Portland\ Group*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; + esac + ;; + esac + ;; + + newsos6) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; + + osf3* | osf4* | osf5*) + lt_prog_compiler_wl='-Wl,' + # All OSF/1 code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + + rdos*) + lt_prog_compiler_static='-non_shared' + ;; + + solaris*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + case $cc_basename in + f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + lt_prog_compiler_wl='-Qoption ld ';; + *) + lt_prog_compiler_wl='-Wl,';; + esac + ;; + + sunos4*) + lt_prog_compiler_wl='-Qoption ld ' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic='-Kconform_pic' + lt_prog_compiler_static='-Bstatic' + fi + ;; + + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + unicos*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_can_build_shared=no + ;; + + uts4*) + lt_prog_compiler_pic='-pic' + lt_prog_compiler_static='-Bstatic' + ;; + + *) + lt_prog_compiler_can_build_shared=no + ;; + esac + fi + +case $host_os in + # For platforms that do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic= + ;; + *) + lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" + ;; +esac + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 +$as_echo_n "checking for $compiler option to produce PIC... " >&6; } +if ${lt_cv_prog_compiler_pic+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic=$lt_prog_compiler_pic +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 +$as_echo "$lt_cv_prog_compiler_pic" >&6; } +lt_prog_compiler_pic=$lt_cv_prog_compiler_pic + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 +$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } +if ${lt_cv_prog_compiler_pic_works+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic_works=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic -DPIC" ## exclude from sc_useless_quotes_in_assignment + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_pic_works=yes + fi + fi + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 +$as_echo "$lt_cv_prog_compiler_pic_works" >&6; } + +if test yes = "$lt_cv_prog_compiler_pic_works"; then + case $lt_prog_compiler_pic in + "" | " "*) ;; + *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; + esac +else + lt_prog_compiler_pic= + lt_prog_compiler_can_build_shared=no +fi + +fi + + + + + + + + + + + +# +# Check to make sure the static flag actually works. +# +wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } +if ${lt_cv_prog_compiler_static_works+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_static_works=no + save_LDFLAGS=$LDFLAGS + LDFLAGS="$LDFLAGS $lt_tmp_static_flag" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_static_works=yes + fi + else + lt_cv_prog_compiler_static_works=yes + fi + fi + $RM -r conftest* + LDFLAGS=$save_LDFLAGS + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 +$as_echo "$lt_cv_prog_compiler_static_works" >&6; } + +if test yes = "$lt_cv_prog_compiler_static_works"; then + : +else + lt_prog_compiler_static= +fi + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if ${lt_cv_prog_compiler_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if ${lt_cv_prog_compiler_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } + + + + +hard_links=nottested +if test no = "$lt_cv_prog_compiler_c_o" && test no != "$need_locks"; then + # do not overwrite the value of need_locks provided by the user + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 +$as_echo_n "checking if we can lock with hard links... " >&6; } + hard_links=yes + $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 +$as_echo "$hard_links" >&6; } + if test no = "$hard_links"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5 +$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } + + runpath_var= + allow_undefined_flag= + always_export_symbols=no + archive_cmds= + archive_expsym_cmds= + compiler_needs_object=no + enable_shared_with_static_runtimes=no + export_dynamic_flag_spec= + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + hardcode_automatic=no + hardcode_direct=no + hardcode_direct_absolute=no + hardcode_libdir_flag_spec= + hardcode_libdir_separator= + hardcode_minus_L=no + hardcode_shlibpath_var=unsupported + inherit_rpath=no + link_all_deplibs=unknown + module_cmds= + module_expsym_cmds= + old_archive_from_new_cmds= + old_archive_from_expsyms_cmds= + thread_safe_flag_spec= + whole_archive_flag_spec= + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + include_expsyms= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ' (' and ')$', so one must not match beginning or + # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc', + # as well as any symbol that contains 'd'. + exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + # Exclude shared library initialization/finalization symbols. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test yes != "$GCC"; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd* | bitrig*) + with_gnu_ld=no + ;; + esac + + ld_shlibs=yes + + # On some targets, GNU ld is compatible enough with the native linker + # that we're better off using the native interface for both. + lt_use_gnu_ld_interface=no + if test yes = "$with_gnu_ld"; then + case $host_os in + aix*) + # The AIX port of GNU ld has always aspired to compatibility + # with the native linker. However, as the warning in the GNU ld + # block says, versions before 2.19.5* couldn't really create working + # shared libraries, regardless of the interface used. + case `$LD -v 2>&1` in + *\ \(GNU\ Binutils\)\ 2.19.5*) ;; + *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; + *\ \(GNU\ Binutils\)\ [3-9]*) ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + fi + + if test yes = "$lt_use_gnu_ld_interface"; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='$wl' + + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + export_dynamic_flag_spec='$wl--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' + else + whole_archive_flag_spec= + fi + supports_anon_versioning=no + case `$LD -v | $SED -e 's/(^)\+)\s\+//' 2>&1` in + *GNU\ gold*) supports_anon_versioning=yes ;; + *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + + # See if GNU ld supports shared libraries. + case $host_os in + aix[3-9]*) + # On AIX/PPC, the GNU linker is very broken + if test ia64 != "$host_cpu"; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: the GNU linker, at least up to release 2.19, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to install binutils +*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. +*** You will then need to restart the configuration process. + +_LT_EOF + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + else + ld_shlibs=no + fi + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + export_dynamic_flag_spec='$wl--export-all-symbols' + allow_undefined_flag=unsupported + always_export_symbols=no + enable_shared_with_static_runtimes=yes + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' + exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file, use it as + # is; otherwise, prepend EXPORTS... + archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + ld_shlibs=no + fi + ;; + + haiku*) + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + link_all_deplibs=yes + ;; + + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + shrext_cmds=.dll + archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + enable_shared_with_static_runtimes=yes + ;; + + interix[3-9]*) + hardcode_direct=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='$wl-rpath,$libdir' + export_dynamic_flag_spec='$wl-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + tmp_diet=no + if test linux-dietlibc = "$host_os"; then + case $cc_basename in + diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) + esac + fi + if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ + && test no = "$tmp_diet" + then + tmp_addflag=' $pic_flag' + tmp_sharedflag='-shared' + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group f77 and f90 compilers + whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + lf95*) # Lahey Fortran 8.1 + whole_archive_flag_spec= + tmp_sharedflag='--shared' ;; + nagfor*) # NAGFOR 5.3 + tmp_sharedflag='-Wl,-shared' ;; + xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) + tmp_sharedflag='-qmkshrobj' + tmp_addflag= ;; + nvcc*) # Cuda Compiler Driver 2.2 + whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + compiler_needs_object=yes + ;; + esac + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C 5.9 + whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + compiler_needs_object=yes + tmp_sharedflag='-G' ;; + *Sun\ F*) # Sun Fortran 8.3 + tmp_sharedflag='-G' ;; + esac + archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + + if test yes = "$supports_anon_versioning"; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' + fi + + case $cc_basename in + tcc*) + export_dynamic_flag_spec='-rdynamic' + ;; + xlf* | bgf* | bgxlf* | mpixlf*) + # IBM XL Fortran 10.1 on PPC cannot create shared libs itself + whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + if test yes = "$supports_anon_versioning"; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac + else + ld_shlibs=no + fi + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris*) + if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + ;; + + sunos4*) + archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + + if test no = "$ld_shlibs"; then + runpath_var= + hardcode_libdir_flag_spec= + export_dynamic_flag_spec= + whole_archive_flag_spec= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag=unsupported + always_export_symbols=yes + archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + + aix[4-9]*) + if test ia64 = "$host_cpu"; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag= + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to GNU nm, but means don't demangle to AIX nm. + # Without the "-l" option, or with the "-B" option, AIX nm treats + # weak defined symbols like other global defined symbols, whereas + # GNU nm marks them as "W". + # While the 'weak' keyword is ignored in the Export File, we need + # it in the Import File for the 'aix-soname' feature, so we have + # to replace the "-B" option with "-P" for AIX nm. + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # have runtime linking enabled, and use it for executables. + # For shared libraries, we enable/disable runtime linking + # depending on the kind of the shared library created - + # when "with_aix_soname,aix_use_runtimelinking" is: + # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables + # "aix,yes" lib.so shared, rtl:yes, for executables + # lib.a static archive + # "both,no" lib.so.V(shr.o) shared, rtl:yes + # lib.a(lib.so.V) shared, rtl:no, for executables + # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a(lib.so.V) shared, rtl:no + # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a static archive + case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then + aix_use_runtimelinking=yes + break + fi + done + if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then + # With aix-soname=svr4, we create the lib.so.V shared archives only, + # so we don't have lib.a shared libs to link our executables. + # We have to force runtime linking in this case. + aix_use_runtimelinking=yes + LDFLAGS="$LDFLAGS -Wl,-brtl" + fi + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + archive_cmds='' + hardcode_direct=yes + hardcode_direct_absolute=yes + hardcode_libdir_separator=':' + link_all_deplibs=yes + file_list_spec='$wl-f,' + case $with_aix_soname,$aix_use_runtimelinking in + aix,*) ;; # traditional, no import file + svr4,* | *,yes) # use import file + # The Import File defines what to hardcode. + hardcode_direct=no + hardcode_direct_absolute=no + ;; + esac + + if test yes = "$GCC"; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`$CC -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + hardcode_direct=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + ;; + esac + shared_flag='-shared' + if test yes = "$aix_use_runtimelinking"; then + shared_flag="$shared_flag "'$wl-G' + fi + # Need to ensure runtime linking is disabled for the traditional + # shared library, or the linker may eventually find shared libraries + # /with/ Import File - we do not want to mix them. + shared_flag_aix='-shared' + shared_flag_svr4='-shared $wl-G' + else + # not using gcc + if test ia64 = "$host_cpu"; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test yes = "$aix_use_runtimelinking"; then + shared_flag='$wl-G' + else + shared_flag='$wl-bM:SRE' + fi + shared_flag_aix='$wl-bM:SRE' + shared_flag_svr4='$wl-G' + fi + fi + + export_dynamic_flag_spec='$wl-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols=yes + if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. + if test set = "${lt_cv_aix_libpath+set}"; then + aix_libpath=$lt_cv_aix_libpath +else + if ${lt_cv_aix_libpath_+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }' + lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=/usr/lib:/lib + fi + +fi + + aix_libpath=$lt_cv_aix_libpath_ +fi + + hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag + else + if test ia64 = "$host_cpu"; then + hardcode_libdir_flag_spec='$wl-R $libdir:/usr/lib:/lib' + allow_undefined_flag="-z nodefs" + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + if test set = "${lt_cv_aix_libpath+set}"; then + aix_libpath=$lt_cv_aix_libpath +else + if ${lt_cv_aix_libpath_+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }' + lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=/usr/lib:/lib + fi + +fi + + aix_libpath=$lt_cv_aix_libpath_ +fi + + hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag=' $wl-bernotok' + allow_undefined_flag=' $wl-berok' + if test yes = "$with_gnu_ld"; then + # We only use this code for GNU lds that support --whole-archive. + whole_archive_flag_spec='$wl--whole-archive$convenience $wl--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec='$convenience' + fi + archive_cmds_need_lc=yes + archive_expsym_cmds='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' + # -brtl affects multiple linker settings, -berok does not and is overridden later + compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`' + if test svr4 != "$with_aix_soname"; then + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' + fi + if test aix != "$with_aix_soname"; then + archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' + else + # used by -dlpreopen to get the symbols + archive_expsym_cmds="$archive_expsym_cmds"'~$MV $output_objdir/$realname.d/$soname $output_objdir' + fi + archive_expsym_cmds="$archive_expsym_cmds"'~$RM -r $output_objdir/$realname.d' + fi + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + + bsdi[45]*) + export_dynamic_flag_spec=-rdynamic + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + case $cc_basename in + cl*) + # Native MSVC + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + always_export_symbols=yes + file_list_spec='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=.dll + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' + archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then + cp "$export_symbols" "$output_objdir/$soname.def"; + echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; + else + $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, )='true' + enable_shared_with_static_runtimes=yes + exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' + # Don't use ranlib + old_postinstall_cmds='chmod 644 $oldlib' + postlink_cmds='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile=$lt_outputfile.exe + lt_tool_outputfile=$lt_tool_outputfile.exe + ;; + esac~ + if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # Assume MSVC wrapper + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=.dll + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_from_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' + enable_shared_with_static_runtimes=yes + ;; + esac + ;; + + darwin* | rhapsody*) + + + archive_cmds_need_lc=no + hardcode_direct=no + hardcode_automatic=yes + hardcode_shlibpath_var=unsupported + if test yes = "$lt_cv_ld_force_load"; then + whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + + else + whole_archive_flag_spec='' + fi + link_all_deplibs=yes + allow_undefined_flag=$_lt_dar_allow_undefined + case $cc_basename in + ifort*|nagfor*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; + esac + if test yes = "$_lt_dar_can_shared"; then + output_verbose_link_cmd=func_echo_all + archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil" + module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil" + archive_expsym_cmds="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil" + module_expsym_cmds="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil" + + else + ld_shlibs=no + fi + + ;; + + dgux*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2.*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + hpux9*) + if test yes = "$GCC"; then + archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' + else + archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' + fi + hardcode_libdir_flag_spec='$wl+b $wl$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + export_dynamic_flag_spec='$wl-E' + ;; + + hpux10*) + if test yes,no = "$GCC,$with_gnu_ld"; then + archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test no = "$with_gnu_ld"; then + hardcode_libdir_flag_spec='$wl+b $wl$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='$wl-E' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + fi + ;; + + hpux11*) + if test yes,no = "$GCC,$with_gnu_ld"; then + case $host_cpu in + hppa*64*) + archive_cmds='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + archive_cmds='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + + # Older versions of the 11.00 compiler do not understand -b yet + # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5 +$as_echo_n "checking if $CC understands -b... " >&6; } +if ${lt_cv_prog_compiler__b+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler__b=no + save_LDFLAGS=$LDFLAGS + LDFLAGS="$LDFLAGS -b" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler__b=yes + fi + else + lt_cv_prog_compiler__b=yes + fi + fi + $RM -r conftest* + LDFLAGS=$save_LDFLAGS + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 +$as_echo "$lt_cv_prog_compiler__b" >&6; } + +if test yes = "$lt_cv_prog_compiler__b"; then + archive_cmds='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' +fi + + ;; + esac + fi + if test no = "$with_gnu_ld"; then + hardcode_libdir_flag_spec='$wl+b $wl$libdir' + hardcode_libdir_separator=: + + case $host_cpu in + hppa*64*|ia64*) + hardcode_direct=no + hardcode_shlibpath_var=no + ;; + *) + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='$wl-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test yes = "$GCC"; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. + # This should be the same for all languages, so no per-tag cache variable. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 +$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } +if ${lt_cv_irix_exported_symbol+:} false; then : + $as_echo_n "(cached) " >&6 +else + save_LDFLAGS=$LDFLAGS + LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int foo (void) { return 0; } +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_irix_exported_symbol=yes +else + lt_cv_irix_exported_symbol=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 +$as_echo "$lt_cv_irix_exported_symbol" >&6; } + if test yes = "$lt_cv_irix_exported_symbol"; then + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib' + fi + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib' + fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + hardcode_libdir_separator=: + inherit_rpath=yes + link_all_deplibs=yes + ;; + + linux*) + case $cc_basename in + tcc*) + # Fabrice Bellard et al's Tiny C Compiler + ld_shlibs=yes + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + newsos6) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + hardcode_libdir_separator=: + hardcode_shlibpath_var=no + ;; + + *nto* | *qnx*) + ;; + + openbsd* | bitrig*) + if test -f /usr/libexec/ld.so; then + hardcode_direct=yes + hardcode_shlibpath_var=no + hardcode_direct_absolute=yes + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols' + hardcode_libdir_flag_spec='$wl-rpath,$libdir' + export_dynamic_flag_spec='$wl-E' + else + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='$wl-rpath,$libdir' + fi + else + ld_shlibs=no + fi + ;; + + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + shrext_cmds=.dll + archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + enable_shared_with_static_runtimes=yes + ;; + + osf3*) + if test yes = "$GCC"; then + allow_undefined_flag=' $wl-expect_unresolved $wl\*' + archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + hardcode_libdir_separator=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test yes = "$GCC"; then + allow_undefined_flag=' $wl-expect_unresolved $wl\*' + archive_cmds='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp' + + # Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + archive_cmds_need_lc='no' + hardcode_libdir_separator=: + ;; + + solaris*) + no_undefined_flag=' -z defs' + if test yes = "$GCC"; then + wlarc='$wl' + archive_cmds='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) + wlarc='' + archive_cmds='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + ;; + *) + wlarc='$wl' + archive_cmds='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + ;; + esac + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_shlibpath_var=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands '-z linker_flag'. GCC discards it without '$wl', + # but is careful enough not to reorder. + # Supported since Solaris 2.6 (maybe 2.5.1?) + if test yes = "$GCC"; then + whole_archive_flag_spec='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' + else + whole_archive_flag_spec='-z allextract$convenience -z defaultextract' + fi + ;; + esac + link_all_deplibs=yes + ;; + + sunos4*) + if test sequent = "$host_vendor"; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + sysv4) + case $host_vendor in + sni) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' + reload_cmds='$CC -r -o $output$reload_objs' + hardcode_direct=no + ;; + motorola) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; + + sysv4.3*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + export_dynamic_flag_spec='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs=yes + fi + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) + no_undefined_flag='$wl-z,text' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + runpath_var='LD_RUN_PATH' + + if test yes = "$GCC"; then + archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We CANNOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + no_undefined_flag='$wl-z,text' + allow_undefined_flag='$wl-z,nodefs' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='$wl-R,$libdir' + hardcode_libdir_separator=':' + link_all_deplibs=yes + export_dynamic_flag_spec='$wl-Bexport' + runpath_var='LD_RUN_PATH' + + if test yes = "$GCC"; then + archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + uts4*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + *) + ld_shlibs=no + ;; + esac + + if test sni = "$host_vendor"; then + case $host in + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + export_dynamic_flag_spec='$wl-Blargedynsym' + ;; + esac + fi + fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 +$as_echo "$ld_shlibs" >&6; } +test no = "$ld_shlibs" && can_build_shared=no + +with_gnu_ld=$with_gnu_ld + + + + + + + + + + + + + + + +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc=yes + + if test yes,yes = "$GCC,$enable_shared"; then + case $archive_cmds in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 +$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } +if ${lt_cv_archive_cmds_need_lc+:} false; then : + $as_echo_n "(cached) " >&6 +else + $RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl + pic_flag=$lt_prog_compiler_pic + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 + (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + then + lt_cv_archive_cmds_need_lc=no + else + lt_cv_archive_cmds_need_lc=yes + fi + allow_undefined_flag=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 +$as_echo "$lt_cv_archive_cmds_need_lc" >&6; } + archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc + ;; + esac + fi + ;; +esac + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 +$as_echo_n "checking dynamic linker characteristics... " >&6; } + +if test yes = "$GCC"; then + case $host_os in + darwin*) lt_awk_arg='/^libraries:/,/LR/' ;; + *) lt_awk_arg='/^libraries:/' ;; + esac + case $host_os in + mingw* | cegcc*) lt_sed_strip_eq='s|=\([A-Za-z]:\)|\1|g' ;; + *) lt_sed_strip_eq='s|=/|/|g' ;; + esac + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` + case $lt_search_path_spec in + *\;*) + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` + ;; + *) + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` + ;; + esac + # Ok, now we have the path, separated by spaces, we can step through it + # and add multilib dir if necessary... + lt_tmp_lt_search_path_spec= + lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + # ...but if some path component already ends with the multilib dir we assume + # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer). + case "$lt_multi_os_dir; $lt_search_path_spec " in + "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*) + lt_multi_os_dir= + ;; + esac + for lt_sys_path in $lt_search_path_spec; do + if test -d "$lt_sys_path$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir" + elif test -n "$lt_multi_os_dir"; then + test -d "$lt_sys_path" && \ + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" + fi + done + lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' +BEGIN {RS = " "; FS = "/|\n";} { + lt_foo = ""; + lt_count = 0; + for (lt_i = NF; lt_i > 0; lt_i--) { + if ($lt_i != "" && $lt_i != ".") { + if ($lt_i == "..") { + lt_count++; + } else { + if (lt_count == 0) { + lt_foo = "/" $lt_i lt_foo; + } else { + lt_count--; + } + } + } + } + if (lt_foo != "") { lt_freq[lt_foo]++; } + if (lt_freq[lt_foo] == 1) { print lt_foo; } +}'` + # AWK program above erroneously prepends '/' to C:/dos/paths + # for these hosts. + case $host_os in + mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ + $SED 's|/\([A-Za-z]:\)|\1|g'` ;; + esac + sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=.so +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + + + +case $host_os in +aix3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$release$shared_ext$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='$libname$release$shared_ext$major' + ;; + +aix[4-9]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test ia64 = "$host_cpu"; then + # AIX 5 supports IA64 + library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line '#! .'. This would cause the generated library to + # depend on '.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # Using Import Files as archive members, it is possible to support + # filename-based versioning of shared library archives on AIX. While + # this would work for both with and without runtime linking, it will + # prevent static linking of such archives. So we do filename-based + # shared library versioning with .so extension only, which is used + # when both runtime linking and shared linking is enabled. + # Unfortunately, runtime linking may impact performance, so we do + # not want this to be the default eventually. Also, we use the + # versioned .so libs for executables only if there is the -brtl + # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only. + # To allow for filename-based versioning support, we need to create + # libNAME.so.V as an archive file, containing: + # *) an Import File, referring to the versioned filename of the + # archive as well as the shared archive member, telling the + # bitwidth (32 or 64) of that shared object, and providing the + # list of exported symbols of that shared object, eventually + # decorated with the 'weak' keyword + # *) the shared object with the F_LOADONLY flag set, to really avoid + # it being seen by the linker. + # At run time we better use the real file rather than another symlink, + # but for link time we create the symlink libNAME.so -> libNAME.so.V + + case $with_aix_soname,$aix_use_runtimelinking in + # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + aix,yes) # traditional libtool + dynamic_linker='AIX unversionable lib.so' + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + ;; + aix,no) # traditional AIX only + dynamic_linker='AIX lib.a(lib.so.V)' + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='$libname$release.a $libname.a' + soname_spec='$libname$release$shared_ext$major' + ;; + svr4,*) # full svr4 only + dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)" + library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' + # We do not specify a path in Import Files, so LIBPATH fires. + shlibpath_overrides_runpath=yes + ;; + *,yes) # both, prefer svr4 + dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)" + library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' + # unpreferred sharedlib libNAME.a needs extra handling + postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"' + postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"' + # We do not specify a path in Import Files, so LIBPATH fires. + shlibpath_overrides_runpath=yes + ;; + *,no) # both, prefer aix + dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)" + library_names_spec='$libname$release.a $libname.a' + soname_spec='$libname$release$shared_ext$major' + # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling + postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)' + postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"' + ;; + esac + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac + ;; + +beos*) + library_names_spec='$libname$shared_ext' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[45]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32* | cegcc*) + version_type=windows + shrext_cmds=.dll + need_version=no + need_lib_prefix=no + + case $GCC,$cc_basename in + yes,*) + # gcc + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' + + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" + ;; + mingw* | cegcc*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' + ;; + esac + dynamic_linker='Win32 ld.exe' + ;; + + *,cl*) + # Native MSVC + libname_spec='$name' + soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' + library_names_spec='$libname.dll.lib' + + case $build_os in + mingw*) + sys_lib_search_path_spec= + lt_save_ifs=$IFS + IFS=';' + for lt_path in $LIB + do + IFS=$lt_save_ifs + # Let DOS variable expansion print the short 8.3 style file name. + lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` + sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" + done + IFS=$lt_save_ifs + # Convert to MSYS style. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` + ;; + cygwin*) + # Convert to unix form, then to dos form, then back to unix form + # but this time dos style (no spaces!) so that the unix form looks + # like /cygdrive/c/PROGRA~1:/cygdr... + sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` + sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` + sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + ;; + *) + sys_lib_search_path_spec=$LIB + if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + # FIXME: find the short name or the path components, as spaces are + # common. (e.g. "Program Files" -> "PROGRA~1") + ;; + esac + + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + dynamic_linker='Win32 link.exe' + ;; + + *) + # Assume MSVC wrapper + library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib' + dynamic_linker='Win32 ld.exe' + ;; + esac + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$major$shared_ext $libname$shared_ext' + soname_spec='$libname$release$major$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[23].*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2.*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ + freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; + +haiku*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + dynamic_linker="$host_os runtime_loader" + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=no + sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + if test 32 = "$HPUX_IA64_MODE"; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + sys_lib_dlsearch_path_spec=/usr/lib/hpux32 + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + sys_lib_dlsearch_path_spec=/usr/lib/hpux64 + fi + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + postinstall_cmds='chmod 555 $lib' + # or fails outright, so override atomically: + install_override_mode=555 + ;; + +interix[3-9]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test yes = "$lt_cv_prog_gnu_ld"; then + version_type=linux # correct to gnu/linux during the next big refactor + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='$libname$release$shared_ext$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff" + sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +linux*android*) + version_type=none # Android doesn't support versioned libraries. + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext' + soname_spec='$libname$release$shared_ext' + finish_cmds= + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + dynamic_linker='Android linker' + # Don't embed -rpath directories since the linker doesn't support them. + hardcode_libdir_flag_spec='-L$libdir' + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + + # Some binutils ld are patched to set DT_RUNPATH + if ${lt_cv_shlibpath_overrides_runpath+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_shlibpath_overrides_runpath=no + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ + LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : + lt_cv_shlibpath_overrides_runpath=yes +fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + +fi + + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Ideally, we could use ldconfig to report *all* directores which are + # searched for libraries, however this is still not possible. Aside from not + # being certain /sbin/ldconfig is available, command + # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64, + # even though it is searched at run-time. Try to do the best guess by + # appending ld.so.conf contents (and includes) to the search path. + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +*nto* | *qnx*) + version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' + ;; + +openbsd* | bitrig*) + version_type=sunos + sys_lib_dlsearch_path_spec=/usr/lib + need_lib_prefix=no + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then + need_version=no + else + need_version=yes + fi + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +os2*) + libname_spec='$name' + version_type=windows + shrext_cmds=.dll + need_version=no + need_lib_prefix=no + # OS/2 can only load a DLL with a base name of 8 characters or less. + soname_spec='`test -n "$os2dllname" && libname="$os2dllname"; + v=$($ECHO $release$versuffix | tr -d .-); + n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _); + $ECHO $n$v`$shared_ext' + library_names_spec='${libname}_dll.$libext' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=BEGINLIBPATH + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='$libname$release$shared_ext$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + +rdos*) + dynamic_linker=no + ;; + +solaris*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test yes = "$with_gnu_ld"; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec; then + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext' + soname_spec='$libname$shared_ext.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=sco + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test yes = "$with_gnu_ld"; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +uts4*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 +$as_echo "$dynamic_linker" >&6; } +test no = "$dynamic_linker" && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test yes = "$GCC"; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then + sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec +fi + +if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then + sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec +fi + +# remember unaugmented sys_lib_dlsearch_path content for libtool script decls... +configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec + +# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code +func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH" + +# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool +configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 +$as_echo_n "checking how to hardcode library paths into programs... " >&6; } +hardcode_action= +if test -n "$hardcode_libdir_flag_spec" || + test -n "$runpath_var" || + test yes = "$hardcode_automatic"; then + + # We can hardcode non-existent directories. + if test no != "$hardcode_direct" && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, )" && + test no != "$hardcode_minus_L"; then + # Linking always hardcodes the temporary library directory. + hardcode_action=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action=unsupported +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 +$as_echo "$hardcode_action" >&6; } + +if test relink = "$hardcode_action" || + test yes = "$inherit_rpath"; then + # Fast installation is not supported + enable_fast_install=no +elif test yes = "$shlibpath_overrides_runpath" || + test no = "$enable_shared"; then + # Fast installation is not necessary + enable_fast_install=needless +fi + + + + + + + if test yes != "$enable_dlopen"; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen=load_add_on + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32* | cegcc*) + lt_cv_dlopen=LoadLibrary + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen=dlopen + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if ${ac_cv_lib_dl_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dl_dlopen=yes +else + ac_cv_lib_dl_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = xyes; then : + lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl +else + + lt_cv_dlopen=dyld + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + +fi + + ;; + + tpf*) + # Don't try to run any link tests for TPF. We know it's impossible + # because TPF is a cross-compiler, and we know how we open DSOs. + lt_cv_dlopen=dlopen + lt_cv_dlopen_libs= + lt_cv_dlopen_self=no + ;; + + *) + ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" +if test "x$ac_cv_func_shl_load" = xyes; then : + lt_cv_dlopen=shl_load +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 +$as_echo_n "checking for shl_load in -ldld... " >&6; } +if ${ac_cv_lib_dld_shl_load+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char shl_load (); +int +main () +{ +return shl_load (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dld_shl_load=yes +else + ac_cv_lib_dld_shl_load=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 +$as_echo "$ac_cv_lib_dld_shl_load" >&6; } +if test "x$ac_cv_lib_dld_shl_load" = xyes; then : + lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld +else + ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" +if test "x$ac_cv_func_dlopen" = xyes; then : + lt_cv_dlopen=dlopen +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if ${ac_cv_lib_dl_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dl_dlopen=yes +else + ac_cv_lib_dl_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = xyes; then : + lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 +$as_echo_n "checking for dlopen in -lsvld... " >&6; } +if ${ac_cv_lib_svld_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lsvld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_svld_dlopen=yes +else + ac_cv_lib_svld_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 +$as_echo "$ac_cv_lib_svld_dlopen" >&6; } +if test "x$ac_cv_lib_svld_dlopen" = xyes; then : + lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 +$as_echo_n "checking for dld_link in -ldld... " >&6; } +if ${ac_cv_lib_dld_dld_link+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dld_link (); +int +main () +{ +return dld_link (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dld_dld_link=yes +else + ac_cv_lib_dld_dld_link=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 +$as_echo "$ac_cv_lib_dld_dld_link" >&6; } +if test "x$ac_cv_lib_dld_dld_link" = xyes; then : + lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld +fi + + +fi + + +fi + + +fi + + +fi + + +fi + + ;; + esac + + if test no = "$lt_cv_dlopen"; then + enable_dlopen=no + else + enable_dlopen=yes + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS=$CPPFLAGS + test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS=$LDFLAGS + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS=$LIBS + LIBS="$lt_cv_dlopen_libs $LIBS" + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 +$as_echo_n "checking whether a program can dlopen itself... " >&6; } +if ${lt_cv_dlopen_self+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test yes = "$cross_compiling"; then : + lt_cv_dlopen_self=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +#line $LINENO "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisibility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); +#endif + +int fnord () { return 42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +} +_LT_EOF + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self=no + fi +fi +rm -fr conftest* + + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 +$as_echo "$lt_cv_dlopen_self" >&6; } + + if test yes = "$lt_cv_dlopen_self"; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 +$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } +if ${lt_cv_dlopen_self_static+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test yes = "$cross_compiling"; then : + lt_cv_dlopen_self_static=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +#line $LINENO "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisibility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); +#endif + +int fnord () { return 42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +} +_LT_EOF + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self_static=no + fi +fi +rm -fr conftest* + + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 +$as_echo "$lt_cv_dlopen_self_static" >&6; } + fi + + CPPFLAGS=$save_CPPFLAGS + LDFLAGS=$save_LDFLAGS + LIBS=$save_LIBS + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi + + + + + + + + + + + + + + + + + +striplib= +old_striplib= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 +$as_echo_n "checking whether stripping libraries is possible... " >&6; } +if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP"; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + fi + ;; + *) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + ;; + esac +fi + + + + + + + + + + + + + # Report what library types will actually be built + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 +$as_echo_n "checking if libtool supports shared libraries... " >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 +$as_echo "$can_build_shared" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 +$as_echo_n "checking whether to build shared libraries... " >&6; } + test no = "$can_build_shared" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test yes = "$enable_shared" && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + + aix[4-9]*) + if test ia64 != "$host_cpu"; then + case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in + yes,aix,yes) ;; # shared object as lib.so file only + yes,svr4,*) ;; # shared object as lib.so archive member only + yes,*) enable_static=no ;; # shared object in lib.a archive as well + esac + fi + ;; + esac + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 +$as_echo "$enable_shared" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 +$as_echo_n "checking whether to build static libraries... " >&6; } + # Make sure either enable_shared or enable_static is yes. + test yes = "$enable_shared" || enable_static=yes + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 +$as_echo "$enable_static" >&6; } + + + + +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +CC=$lt_save_CC + + + + + + + + + + + + + + + + ac_config_commands="$ac_config_commands libtool" + + + + +# Only expand once: + + + +# Select memory manager depending on user input. +# If no "-enable-maxmem", use jmemnobs +MEMORYMGR='jmemnobs' +MAXMEM="no" +# Check whether --enable-maxmem was given. +if test "${enable_maxmem+set}" = set; then : + enableval=$enable_maxmem; MAXMEM="$enableval" +fi + +if test "x$MAXMEM" = xyes; then + MAXMEM=1 +fi +if test "x$MAXMEM" != xno; then + if test -n "`echo $MAXMEM | sed 's/[0-9]//g'`"; then + as_fn_error $? "non-numeric argument to --enable-maxmem" "$LINENO" 5 + fi + DEFAULTMAXMEM=`expr $MAXMEM \* 1048576` + +cat >>confdefs.h <<_ACEOF +#define DEFAULT_MAX_MEM ${DEFAULTMAXMEM} +_ACEOF + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for 'tmpfile()'" >&5 +$as_echo_n "checking for 'tmpfile()'... " >&6; } + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ + FILE * tfile = tmpfile(); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + MEMORYMGR='jmemansi' +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + MEMORYMGR='jmemname' + + # Test for the need to remove temporary files using a signal handler + # (for cjpeg/djpeg) + +$as_echo "#define NEED_SIGNAL_CATCHER 1" >>confdefs.h + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for 'mktemp()'" >&5 +$as_echo_n "checking for 'mktemp()'... " >&6; } + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + char fname[80]; mktemp(fname); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +$as_echo "#define NO_MKTEMP 1" >>confdefs.h + +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi + + +# Extract the library version IDs from jpeglib.h. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking libjpeg version number" >&5 +$as_echo_n "checking libjpeg version number... " >&6; } +major=`sed -ne 's/^#define JPEG_LIB_VERSION_MAJOR *\([0-9][0-9]*\).*$/\1/p' $srcdir/jpeglib.h` +minor=`sed -ne 's/^#define JPEG_LIB_VERSION_MINOR *\([0-9][0-9]*\).*$/\1/p' $srcdir/jpeglib.h` +JPEG_LIB_VERSION=`expr $major + $minor`:0:$minor + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $JPEG_LIB_VERSION" >&5 +$as_echo "$JPEG_LIB_VERSION" >&6; } + +ac_config_files="$ac_config_files Makefile" + +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, we kill variables containing newlines. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes: double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \. + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) | + sed ' + /^ac_cv_env_/b end + t clear + :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + if test "x$cache_file" != "x/dev/null"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 +$as_echo "$as_me: updating cache $cache_file" >&6;} + if test ! -f "$cache_file" || test -h "$cache_file"; then + cat confcache >"$cache_file" + else + case $cache_file in #( + */* | ?:*) + mv -f confcache "$cache_file"$$ && + mv -f "$cache_file"$$ "$cache_file" ;; #( + *) + mv -f confcache "$cache_file" ;; + esac + fi + fi + else + { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 +$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +DEFS=-DHAVE_CONFIG_H + +ac_libobjs= +ac_ltlibobjs= +U= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`$as_echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" + as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 +$as_echo_n "checking that generated files are newer than configure... " >&6; } + if test -n "$am_sleep_pid"; then + # Hide warnings about reused PIDs. + wait $am_sleep_pid 2>/dev/null + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 +$as_echo "done" >&6; } + if test -n "$EXEEXT"; then + am__EXEEXT_TRUE= + am__EXEEXT_FALSE='#' +else + am__EXEEXT_TRUE='#' + am__EXEEXT_FALSE= +fi + +if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then + as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then + as_fn_error $? "conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then + as_fn_error $? "conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${HAVE_LD_VERSION_SCRIPT_TRUE}" && test -z "${HAVE_LD_VERSION_SCRIPT_FALSE}"; then + as_fn_error $? "conditional \"HAVE_LD_VERSION_SCRIPT\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi + +: "${CONFIG_STATUS=./config.status}" +ac_write_fail=0 +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +as_write_fail=0 +cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false + +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +exec 6>&1 +## ----------------------------------- ## +## Main body of $CONFIG_STATUS script. ## +## ----------------------------------- ## +_ASEOF +test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# Save the log message, to keep $0 and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by libjpeg $as_me 9.2.0, which was +generated by GNU Autoconf 2.69. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + +_ACEOF + +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac + +case $ac_config_headers in *" +"*) set x $ac_config_headers; shift; ac_config_headers=$*;; +esac + + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# Files that config.status was made for. +config_files="$ac_config_files" +config_headers="$ac_config_headers" +config_commands="$ac_config_commands" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +ac_cs_usage="\ +\`$as_me' instantiates files and other configuration actions +from templates according to the current configuration. Unless the files +and actions are specified as TAGs, all are instantiated by default. + +Usage: $0 [OPTION]... [TAG]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + --config print configuration, then exit + -q, --quiet, --silent + do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + --header=FILE[:TEMPLATE] + instantiate the configuration header FILE + +Configuration files: +$config_files + +Configuration headers: +$config_headers + +Configuration commands: +$config_commands + +Report bugs to the package provider." + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" +ac_cs_version="\\ +libjpeg config.status 9.2.0 +configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" + +Copyright (C) 2012 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +INSTALL='$INSTALL' +MKDIR_P='$MKDIR_P' +AWK='$AWK' +test -n "\$AWK" || AWK=awk +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# The default lists apply if the user does not specify any file. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=?*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + --*=) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg= + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac + + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + $as_echo "$ac_cs_version"; exit ;; + --config | --confi | --conf | --con | --co | --c ) + $as_echo "$ac_cs_config"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + '') as_fn_error $? "missing file argument" ;; + esac + as_fn_append CONFIG_FILES " '$ac_optarg'" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + as_fn_append CONFIG_HEADERS " '$ac_optarg'" + ac_need_defaults=false;; + --he | --h) + # Conflict between --help and --header + as_fn_error $? "ambiguous option: \`$1' +Try \`$0 --help' for more information.";; + --help | --hel | -h ) + $as_echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) as_fn_error $? "unrecognized option: \`$1' +Try \`$0 --help' for more information." ;; + + *) as_fn_append ac_config_targets " $1" + ac_need_defaults=false ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +if \$ac_cs_recheck; then + set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + shift + \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 + CONFIG_SHELL='$SHELL' + export CONFIG_SHELL + exec "\$@" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + $as_echo "$ac_log" +} >&5 + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# +# INIT-COMMANDS +# +AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" + + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +sed_quote_subst='$sed_quote_subst' +double_quote_subst='$double_quote_subst' +delay_variable_subst='$delay_variable_subst' +AS='`$ECHO "$AS" | $SED "$delay_single_quote_subst"`' +DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' +OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' +macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' +macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' +enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' +enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' +pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' +enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' +shared_archive_member_spec='`$ECHO "$shared_archive_member_spec" | $SED "$delay_single_quote_subst"`' +SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' +ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' +PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`' +host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' +host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' +host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' +build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`' +build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`' +build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`' +SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`' +Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`' +GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`' +EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`' +FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`' +LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`' +NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`' +LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`' +max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`' +ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`' +exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' +lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' +lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' +lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' +lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' +lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' +reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' +reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' +deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' +file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' +file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' +want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' +sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' +AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' +AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' +archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' +STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' +RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' +old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' +old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`' +old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`' +lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`' +CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`' +CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`' +compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' +GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_import='`$ECHO "$lt_cv_sys_global_symbol_to_import" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' +lt_cv_nm_interface='`$ECHO "$lt_cv_nm_interface" | $SED "$delay_single_quote_subst"`' +nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' +lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' +lt_cv_truncate_bin='`$ECHO "$lt_cv_truncate_bin" | $SED "$delay_single_quote_subst"`' +objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' +MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' +lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' +need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' +MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' +DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' +NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' +LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' +OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`' +OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`' +libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`' +shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`' +extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`' +archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`' +enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`' +export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`' +whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`' +compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`' +old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`' +old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`' +archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`' +archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`' +module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`' +module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`' +with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`' +allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' +no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' +hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' +hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' +hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' +hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`' +hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`' +hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' +inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' +link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' +always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' +export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' +exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' +include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' +prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' +postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' +file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' +variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' +need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' +need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`' +version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`' +runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`' +shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`' +shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`' +libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`' +library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`' +soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`' +install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`' +postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`' +postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`' +finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' +finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' +hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' +sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' +configure_time_dlsearch_path='`$ECHO "$configure_time_dlsearch_path" | $SED "$delay_single_quote_subst"`' +configure_time_lt_sys_library_path='`$ECHO "$configure_time_lt_sys_library_path" | $SED "$delay_single_quote_subst"`' +hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' +enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' +enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' +enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`' +old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`' +striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`' + +LTCC='$LTCC' +LTCFLAGS='$LTCFLAGS' +compiler='$compiler_DEFAULT' + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$1 +_LTECHO_EOF' +} + +# Quote evaled strings. +for var in AS \ +DLLTOOL \ +OBJDUMP \ +SHELL \ +ECHO \ +PATH_SEPARATOR \ +SED \ +GREP \ +EGREP \ +FGREP \ +LD \ +NM \ +LN_S \ +lt_SP2NL \ +lt_NL2SP \ +reload_flag \ +deplibs_check_method \ +file_magic_cmd \ +file_magic_glob \ +want_nocaseglob \ +sharedlib_from_linklib_cmd \ +AR \ +AR_FLAGS \ +archiver_list_spec \ +STRIP \ +RANLIB \ +CC \ +CFLAGS \ +compiler \ +lt_cv_sys_global_symbol_pipe \ +lt_cv_sys_global_symbol_to_cdecl \ +lt_cv_sys_global_symbol_to_import \ +lt_cv_sys_global_symbol_to_c_name_address \ +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ +lt_cv_nm_interface \ +nm_file_list_spec \ +lt_cv_truncate_bin \ +lt_prog_compiler_no_builtin_flag \ +lt_prog_compiler_pic \ +lt_prog_compiler_wl \ +lt_prog_compiler_static \ +lt_cv_prog_compiler_c_o \ +need_locks \ +MANIFEST_TOOL \ +DSYMUTIL \ +NMEDIT \ +LIPO \ +OTOOL \ +OTOOL64 \ +shrext_cmds \ +export_dynamic_flag_spec \ +whole_archive_flag_spec \ +compiler_needs_object \ +with_gnu_ld \ +allow_undefined_flag \ +no_undefined_flag \ +hardcode_libdir_flag_spec \ +hardcode_libdir_separator \ +exclude_expsyms \ +include_expsyms \ +file_list_spec \ +variables_saved_for_relink \ +libname_spec \ +library_names_spec \ +soname_spec \ +install_override_mode \ +finish_eval \ +old_striplib \ +striplib; do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[\\\\\\\`\\"\\\$]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +# Double-quote double-evaled strings. +for var in reload_cmds \ +old_postinstall_cmds \ +old_postuninstall_cmds \ +old_archive_cmds \ +extract_expsyms_cmds \ +old_archive_from_new_cmds \ +old_archive_from_expsyms_cmds \ +archive_cmds \ +archive_expsym_cmds \ +module_cmds \ +module_expsym_cmds \ +export_symbols_cmds \ +prelink_cmds \ +postlink_cmds \ +postinstall_cmds \ +postuninstall_cmds \ +finish_cmds \ +sys_lib_search_path_spec \ +configure_time_dlsearch_path \ +configure_time_lt_sys_library_path; do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[\\\\\\\`\\"\\\$]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +ac_aux_dir='$ac_aux_dir' + +# See if we are running on zsh, and set the options that allow our +# commands through without removal of \ escapes INIT. +if test -n "\${ZSH_VERSION+set}"; then + setopt NO_GLOB_SUBST +fi + + + PACKAGE='$PACKAGE' + VERSION='$VERSION' + RM='$RM' + ofile='$ofile' + + + + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "jconfig.h") CONFIG_HEADERS="$CONFIG_HEADERS jconfig.h:jconfig.cfg" ;; + "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + + *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; + esac +done + + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers + test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. +$debug || +{ + tmp= ac_tmp= + trap 'exit_status=$? + : "${ac_tmp:=$tmp}" + { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status +' 0 + trap 'as_fn_exit 1' 1 2 13 15 +} +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 +ac_tmp=$tmp + +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. +if test -n "$CONFIG_FILES"; then + + +ac_cr=`echo X | tr X '\015'` +# On cygwin, bash can eat \r inside `` if the user requested igncr. +# But we know of no other shell where ac_cr would be empty at this +# point, so we can use a bashism as a fallback. +if test "x$ac_cr" = x; then + eval ac_cr=\$\'\\r\' +fi +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' +else + ac_cs_awk_cr=$ac_cr +fi + +echo 'BEGIN {' >"$ac_tmp/subs1.awk" && +_ACEOF + + +{ + echo "cat >conf$$subs.awk <<_ACEOF" && + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" +} >conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 +ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + . ./conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done +rm -f conf$$subs.sh + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && +_ACEOF +sed -n ' +h +s/^/S["/; s/!.*/"]=/ +p +g +s/^[^!]*!// +:repl +t repl +s/'"$ac_delim"'$// +t delim +:nl +h +s/\(.\{148\}\)..*/\1/ +t more1 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +p +n +b repl +:more1 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t nl +:delim +h +s/\(.\{148\}\)..*/\1/ +t more2 +s/["\\]/\\&/g; s/^/"/; s/$/"/ +p +b +:more2 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t delim +' >$CONFIG_STATUS || ac_write_fail=1 +rm -f conf$$subs.awk +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACAWK +cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" + +} +{ + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } + + print line +} + +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +else + cat +fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ + || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 +_ACEOF + +# VPATH may cause trouble with some makes, so we remove sole $(srcdir), +# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ +h +s/// +s/^/:/ +s/[ ]*$/:/ +s/:\$(srcdir):/:/g +s/:\${srcdir}:/:/g +s/:@srcdir@:/:/g +s/^:*// +s/:*$// +x +s/\(=[ ]*\).*/\1/ +G +s/\n// +s/^[^=]*=[ ]*$// +}' +fi + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +fi # test -n "$CONFIG_FILES" + +# Set up the scripts for CONFIG_HEADERS section. +# No need to generate them if there are no CONFIG_HEADERS. +# This happens for instance with `./config.status Makefile'. +if test -n "$CONFIG_HEADERS"; then +cat >"$ac_tmp/defines.awk" <<\_ACAWK || +BEGIN { +_ACEOF + +# Transform confdefs.h into an awk script `defines.awk', embedded as +# here-document in config.status, that substitutes the proper values into +# config.h.in to produce config.h. + +# Create a delimiter string that does not exist in confdefs.h, to ease +# handling of long lines. +ac_delim='%!_!# ' +for ac_last_try in false false :; do + ac_tt=`sed -n "/$ac_delim/p" confdefs.h` + if test -z "$ac_tt"; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done + +# For the awk script, D is an array of macro values keyed by name, +# likewise P contains macro parameters if any. Preserve backslash +# newline sequences. + +ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* +sed -n ' +s/.\{148\}/&'"$ac_delim"'/g +t rset +:rset +s/^[ ]*#[ ]*define[ ][ ]*/ / +t def +d +:def +s/\\$// +t bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3"/p +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p +d +:bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3\\\\\\n"\\/p +t cont +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p +t cont +d +:cont +n +s/.\{148\}/&'"$ac_delim"'/g +t clear +:clear +s/\\$// +t bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/"/p +d +:bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p +b cont +' >$CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + for (key in D) D_is_set[key] = 1 + FS = "" +} +/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { + line = \$ 0 + split(line, arg, " ") + if (arg[1] == "#") { + defundef = arg[2] + mac1 = arg[3] + } else { + defundef = substr(arg[1], 2) + mac1 = arg[2] + } + split(mac1, mac2, "(") #) + macro = mac2[1] + prefix = substr(line, 1, index(line, defundef) - 1) + if (D_is_set[macro]) { + # Preserve the white space surrounding the "#". + print prefix "define", macro P[macro] D[macro] + next + } else { + # Replace #undef with comments. This is necessary, for example, + # in the case of _POSIX_SOURCE, which is predefined and required + # on some systems where configure will not decide to define it. + if (defundef == "undef") { + print "/*", prefix defundef, macro, "*/" + next + } + } +} +{ print } +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 +fi # test -n "$CONFIG_HEADERS" + + +eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" +shift +for ac_tag +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$ac_tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + as_fn_append ac_file_inputs " '$ac_f'" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} + fi + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac + + case $ac_tag in + *:-:* | *:-) cat >"$ac_tmp/stdin" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; + esac + ;; + esac + + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir="$ac_dir"; as_fn_mkdir_p + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + + case $ac_mode in + :F) + # + # CONFIG_FILE + # + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac + ac_MKDIR_P=$MKDIR_P + case $MKDIR_P in + [\\/$]* | ?:[\\/]* ) ;; + */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; + esac +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= +ac_sed_dataroot=' +/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac +_ACEOF + +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_sed_extra="$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s|@configure_input@|$ac_sed_conf_input|;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +s&@INSTALL@&$ac_INSTALL&;t t +s&@MKDIR_P@&$ac_MKDIR_P&;t t +$ac_datarootdir_hack +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ + >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ + "$ac_tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&5 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&2;} + + rm -f "$ac_tmp/stdin" + case $ac_file in + -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; + *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; + esac \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + ;; + :H) + # + # CONFIG_HEADER + # + if test x"$ac_file" != x-; then + { + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" + } >"$ac_tmp/config.h" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 +$as_echo "$as_me: $ac_file is unchanged" >&6;} + else + rm -f "$ac_file" + mv "$ac_tmp/config.h" "$ac_file" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + fi + else + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ + || as_fn_error $? "could not create -" "$LINENO" 5 + fi +# Compute "$ac_file"'s index in $config_headers. +_am_arg="$ac_file" +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || +$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$_am_arg" : 'X\(//\)[^/]' \| \ + X"$_am_arg" : 'X\(//\)$' \| \ + X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$_am_arg" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'`/stamp-h$_am_stamp_count + ;; + + :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 +$as_echo "$as_me: executing $ac_file commands" >&6;} + ;; + esac + + + case $ac_file$ac_mode in + "depfiles":C) test x"$AMDEP_TRUE" != x"" || { + # Older Autoconf quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named 'Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`$as_dirname -- "$mf" || +$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$mf" : 'X\(//\)[^/]' \| \ + X"$mf" : 'X\(//\)$' \| \ + X"$mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$mf" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running 'make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "$am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`$as_dirname -- "$file" || +$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$file" : 'X\(//\)[^/]' \| \ + X"$file" : 'X\(//\)$' \| \ + X"$file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir=$dirpart/$fdir; as_fn_mkdir_p + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} + ;; + "libtool":C) + + # See if we are running on zsh, and set the options that allow our + # commands through without removal of \ escapes. + if test -n "${ZSH_VERSION+set}"; then + setopt NO_GLOB_SUBST + fi + + cfgfile=${ofile}T + trap "$RM \"$cfgfile\"; exit 1" 1 2 15 + $RM "$cfgfile" + + cat <<_LT_EOF >> "$cfgfile" +#! $SHELL +# Generated automatically by $as_me ($PACKAGE) $VERSION +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# NOTE: Changes made to this file will be lost: look at ltmain.sh. + +# Provide generalized library-building support services. +# Written by Gordon Matzigkeit, 1996 + +# Copyright (C) 2014 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# GNU Libtool is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of of the License, or +# (at your option) any later version. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program or library that is built +# using GNU Libtool, you may include this file under the same +# distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + + +# The names of the tagged configurations supported by this script. +available_tags='' + +# Configured defaults for sys_lib_dlsearch_path munging. +: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"} + +# ### BEGIN LIBTOOL CONFIG + +# Assembler program. +AS=$lt_AS + +# DLL creation program. +DLLTOOL=$lt_DLLTOOL + +# Object dumper program. +OBJDUMP=$lt_OBJDUMP + +# Which release of libtool.m4 was used? +macro_version=$macro_version +macro_revision=$macro_revision + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# What type of objects to build. +pic_mode=$pic_mode + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# Shared archive member basename,for filename based shared library versioning on AIX. +shared_archive_member_spec=$shared_archive_member_spec + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# An echo program that protects backslashes. +ECHO=$lt_ECHO + +# The PATH separator for the build system. +PATH_SEPARATOR=$lt_PATH_SEPARATOR + +# The host system. +host_alias=$host_alias +host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os + +# A sed program that does not truncate output. +SED=$lt_SED + +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="\$SED -e 1s/^X//" + +# A grep program that handles long lines. +GREP=$lt_GREP + +# An ERE matcher. +EGREP=$lt_EGREP + +# A literal string matcher. +FGREP=$lt_FGREP + +# A BSD- or MS-compatible name lister. +NM=$lt_NM + +# Whether we need soft or hard links. +LN_S=$lt_LN_S + +# What is the maximum length of a command? +max_cmd_len=$max_cmd_len + +# Object file suffix (normally "o"). +objext=$ac_objext + +# Executable file suffix (normally ""). +exeext=$exeext + +# whether the shell understands "unset". +lt_unset=$lt_unset + +# turn spaces into newlines. +SP2NL=$lt_lt_SP2NL + +# turn newlines into spaces. +NL2SP=$lt_lt_NL2SP + +# convert \$build file names to \$host format. +to_host_file_cmd=$lt_cv_to_host_file_cmd + +# convert \$build files to toolchain format. +to_tool_file_cmd=$lt_cv_to_tool_file_cmd + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method = "file_magic". +file_magic_cmd=$lt_file_magic_cmd + +# How to find potential files when deplibs_check_method = "file_magic". +file_magic_glob=$lt_file_magic_glob + +# Find potential files using nocaseglob when deplibs_check_method = "file_magic". +want_nocaseglob=$lt_want_nocaseglob + +# Command to associate shared and link libraries. +sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd + +# The archiver. +AR=$lt_AR + +# Flags to create an archive. +AR_FLAGS=$lt_AR_FLAGS + +# How to feed a file listing to the archiver. +archiver_list_spec=$lt_archiver_list_spec + +# A symbol stripping program. +STRIP=$lt_STRIP + +# Commands used to install an old-style archive. +RANLIB=$lt_RANLIB +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Whether to use a lock for old archive extraction. +lock_old_archive_extraction=$lock_old_archive_extraction + +# A C compiler. +LTCC=$lt_CC + +# LTCC compiler flags. +LTCFLAGS=$lt_CFLAGS + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration. +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm into a list of symbols to manually relocate. +global_symbol_to_import=$lt_lt_cv_sys_global_symbol_to_import + +# Transform the output of nm in a C name address pair. +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# Transform the output of nm in a C name address pair when lib prefix is needed. +global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix + +# The name lister interface. +nm_interface=$lt_lt_cv_nm_interface + +# Specify filename containing input files for \$NM. +nm_file_list_spec=$lt_nm_file_list_spec + +# The root where to search for dependent libraries,and where our libraries should be installed. +lt_sysroot=$lt_sysroot + +# Command to truncate a binary pipe. +lt_truncate_bin=$lt_lt_cv_truncate_bin + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# Used to examine libraries when file_magic_cmd begins with "file". +MAGIC_CMD=$MAGIC_CMD + +# Must we lock files when doing compilation? +need_locks=$lt_need_locks + +# Manifest tool. +MANIFEST_TOOL=$lt_MANIFEST_TOOL + +# Tool to manipulate archived DWARF debug symbol files on Mac OS X. +DSYMUTIL=$lt_DSYMUTIL + +# Tool to change global to local symbols on Mac OS X. +NMEDIT=$lt_NMEDIT + +# Tool to manipulate fat objects and archives on Mac OS X. +LIPO=$lt_LIPO + +# ldd/readelf like tool for Mach-O binaries on Mac OS X. +OTOOL=$lt_OTOOL + +# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. +OTOOL64=$lt_OTOOL64 + +# Old archive suffix (normally "a"). +libext=$libext + +# Shared library suffix (normally ".so"). +shrext_cmds=$lt_shrext_cmds + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at link time. +variables_saved_for_relink=$lt_variables_saved_for_relink + +# Do we need the "lib" prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Library versioning type. +version_type=$version_type + +# Shared library runtime path variable. +runpath_var=$runpath_var + +# Shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Permission mode override for installation of shared libraries. +install_override_mode=$lt_install_override_mode + +# Command to use after installation of a shared archive. +postinstall_cmds=$lt_postinstall_cmds + +# Command to use after uninstallation of a shared archive. +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# As "finish_cmds", except a single script fragment to be evaled but +# not shown. +finish_eval=$lt_finish_eval + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Compile-time system search path for libraries. +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Detected run-time system search path for libraries. +sys_lib_dlsearch_path_spec=$lt_configure_time_dlsearch_path + +# Explicit LT_SYS_LIBRARY_PATH set during ./configure time. +configure_time_lt_sys_library_path=$lt_configure_time_lt_sys_library_path + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + + +# The linker used to build libraries. +LD=$lt_LD + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# Commands used to build an old-style archive. +old_archive_cmds=$lt_old_archive_cmds + +# A language specific compiler. +CC=$lt_compiler + +# Is the compiler the GNU compiler? +with_gcc=$GCC + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag + +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic + +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc + +# Whether or not to disallow shared libs when runtime libs are static. +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec + +# Whether the compiler copes with passing no objects directly. +compiler_needs_object=$lt_compiler_needs_object + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds + +# Commands used to build a shared archive. +archive_cmds=$lt_archive_cmds +archive_expsym_cmds=$lt_archive_expsym_cmds + +# Commands used to build a loadable module if different from building +# a shared archive. +module_cmds=$lt_module_cmds +module_expsym_cmds=$lt_module_expsym_cmds + +# Whether we are building with GNU ld or not. +with_gnu_ld=$lt_with_gnu_ld + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag + +# Flag that enforces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec + +# Whether we need a single "-rpath" flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator + +# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes +# DIR into the resulting binary. +hardcode_direct=$hardcode_direct + +# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes +# DIR into the resulting binary and the resulting library dependency is +# "absolute",i.e impossible to change by setting \$shlibpath_var if the +# library is relocated. +hardcode_direct_absolute=$hardcode_direct_absolute + +# Set to "yes" if using the -LDIR flag during linking hardcodes DIR +# into the resulting binary. +hardcode_minus_L=$hardcode_minus_L + +# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR +# into the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var + +# Set to "yes" if building a shared library automatically hardcodes DIR +# into the library and all subsequent libraries and executables linked +# against it. +hardcode_automatic=$hardcode_automatic + +# Set to yes if linker adds runtime paths of dependent libraries +# to runtime path list. +inherit_rpath=$inherit_rpath + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs + +# Set to "yes" if exported symbols are required. +always_export_symbols=$always_export_symbols + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms + +# Commands necessary for linking programs (against libraries) with templates. +prelink_cmds=$lt_prelink_cmds + +# Commands necessary for finishing linking programs. +postlink_cmds=$lt_postlink_cmds + +# Specify filename containing input files. +file_list_spec=$lt_file_list_spec + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action + +# ### END LIBTOOL CONFIG + +_LT_EOF + + cat <<'_LT_EOF' >> "$cfgfile" + +# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE + +# func_munge_path_list VARIABLE PATH +# ----------------------------------- +# VARIABLE is name of variable containing _space_ separated list of +# directories to be munged by the contents of PATH, which is string +# having a format: +# "DIR[:DIR]:" +# string "DIR[ DIR]" will be prepended to VARIABLE +# ":DIR[:DIR]" +# string "DIR[ DIR]" will be appended to VARIABLE +# "DIRP[:DIRP]::[DIRA:]DIRA" +# string "DIRP[ DIRP]" will be prepended to VARIABLE and string +# "DIRA[ DIRA]" will be appended to VARIABLE +# "DIR[:DIR]" +# VARIABLE will be replaced by "DIR[ DIR]" +func_munge_path_list () +{ + case x$2 in + x) + ;; + *:) + eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\" + ;; + x:*) + eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\" + ;; + *::*) + eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" + eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\" + ;; + *) + eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\" + ;; + esac +} + + +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +func_cc_basename () +{ + for cc_temp in $*""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac + done + func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +} + + +# ### END FUNCTIONS SHARED WITH CONFIGURE + +_LT_EOF + + case $host_os in + aix3*) + cat <<\_LT_EOF >> "$cfgfile" +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test set != "${COLLECT_NAMES+set}"; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +_LT_EOF + ;; + esac + + +ltmain=$ac_aux_dir/ltmain.sh + + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" + + ;; + + esac +done # for ac_tag + + +as_fn_exit 0 +_ACEOF +ac_clean_files=$ac_clean_files_save + +test $ac_write_fail = 0 || + as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || as_fn_exit 1 +fi +if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 +$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} +fi + diff --git a/compat/libjpeg/configure.ac b/compat/libjpeg/configure.ac new file mode 100755 index 0000000..e06ff34 --- /dev/null +++ b/compat/libjpeg/configure.ac @@ -0,0 +1,365 @@ +# IJG auto-configuration source file. +# Process this file with autoconf to produce a configure script. + +# +# Configure script for IJG libjpeg +# + +AC_INIT([libjpeg], [9.2.0]) + +# Directory where autotools helper scripts lives. +AC_CONFIG_AUX_DIR([.]) + +# Generate configuration headers. +AC_CONFIG_HEADERS([jconfig.h:jconfig.cfg]) + +# Hack: disable autoheader so that it doesn't overwrite our cfg template. +AUTOHEADER="echo autoheader ignored" + +# Check system type +AC_CANONICAL_TARGET + +# Initialize Automake +# Don't require all the GNU mandated files +AM_INIT_AUTOMAKE([-Wall -Werror no-dist foreign]) + +# Make --enable-silent-rules the default. +# To get verbose build output you may configure +# with --disable-silent-rules or use "make V=1". +AM_SILENT_RULES([yes]) + +# Add configure option --enable-maintainer-mode which enables +# dependency checking and generation useful to package maintainers. +# This is made an option to avoid confusing end users. +AM_MAINTAINER_MODE + +# Check for programs +AC_PROG_CC +AC_PROG_CC_STDC +AC_PROG_CPP +AC_PROG_INSTALL +AC_PROG_MAKE_SET +AC_PROG_LN_S +AM_PROG_AR + +# Check if LD supports linker scripts, +# and define automake conditional HAVE_LD_VERSION_SCRIPT if so. +AC_ARG_ENABLE([ld-version-script], + AS_HELP_STRING([--enable-ld-version-script], + [enable linker version script (default is enabled when possible)]), + [have_ld_version_script=$enableval], []) +if test -z "$have_ld_version_script"; then + AC_MSG_CHECKING([if LD -Wl,--version-script works]) + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -Wl,--version-script=conftest.map" + cat > conftest.map < rather than standard .])]) + +# See whether type size_t is defined in any ANSI-standard places; +# if not, perhaps it is defined in . +AC_MSG_CHECKING([for size_t]) +AC_TRY_COMPILE([ +#ifdef HAVE_STDDEF_H +#include +#endif +#ifdef HAVE_STDLIB_H +#include +#endif +#include +#ifdef NEED_BSD_STRINGS +#include +#else +#include +#endif +typedef size_t my_size_t; +], + [ my_size_t foovar; ], + [ijg_size_t_ok=yes], + [ijg_size_t_ok="not ANSI, perhaps it is in sys/types.h"]) +AC_MSG_RESULT([$ijg_size_t_ok]) +if test "$ijg_size_t_ok" != yes; then + AC_CHECK_HEADER([sys/types.h], + [AC_DEFINE([NEED_SYS_TYPES_H], [1], + [Need to include in order to obtain size_t.]) + AC_EGREP_CPP([size_t], [#include ], + [ijg_size_t_ok="size_t is in sys/types.h"], + [ijg_size_t_ok=no])], + [ijg_size_t_ok=no]) + AC_MSG_RESULT([$ijg_size_t_ok]) + if test "$ijg_size_t_ok" = no; then + AC_MSG_WARN([Type size_t is not defined in any of the usual places. + Try putting '"typedef unsigned int size_t;"' in jconfig.h.]) + fi +fi + +# Check compiler characteristics +AC_MSG_CHECKING([for type unsigned char]) +AC_TRY_COMPILE([], [ unsigned char un_char; ], + [AC_MSG_RESULT(yes) + AC_DEFINE([HAVE_UNSIGNED_CHAR], [1], + [Compiler supports 'unsigned char'.])], + [AC_MSG_RESULT(no)]) + +AC_MSG_CHECKING([for type unsigned short]) +AC_TRY_COMPILE([], [ unsigned short un_short; ], + [AC_MSG_RESULT(yes) + AC_DEFINE([HAVE_UNSIGNED_SHORT], [1], + [Compiler supports 'unsigned short'.])], + [AC_MSG_RESULT(no)]) + +AC_MSG_CHECKING([for type void]) +AC_TRY_COMPILE([ +/* Caution: a C++ compiler will insist on valid prototypes */ +typedef void * void_ptr; /* check void * */ +#ifdef HAVE_PROTOTYPES /* check ptr to function returning void */ +typedef void (*void_func) (int a, int b); +#else +typedef void (*void_func) (); +#endif + +#ifdef HAVE_PROTOTYPES /* check void function result */ +void test3function (void_ptr arg1, void_func arg2) +#else +void test3function (arg1, arg2) + void_ptr arg1; + void_func arg2; +#endif +{ + char * locptr = (char *) arg1; /* check casting to and from void * */ + arg1 = (void *) locptr; + (*arg2) (1, 2); /* check call of fcn returning void */ +} +], [ ], + [AC_MSG_RESULT(yes)], + [AC_MSG_RESULT(no) + AC_DEFINE([void], [char], + [Define 'void' as 'char' for archaic compilers + that don't understand it.])]) +AC_C_CONST + +# Check for non-broken inline under various spellings +AC_MSG_CHECKING([for inline]) +ijg_cv_inline="" +AC_TRY_COMPILE([], [} __inline__ int foo() { return 0; } +int bar() { return foo();], ijg_cv_inline="__inline__", +[AC_TRY_COMPILE(, [} __inline int foo() { return 0; } +int bar() { return foo();], ijg_cv_inline="__inline", +[AC_TRY_COMPILE(, [} inline int foo() { return 0; } +int bar() { return foo();], ijg_cv_inline="inline")])]) +AC_MSG_RESULT($ijg_cv_inline) +AC_DEFINE_UNQUOTED([INLINE], [$ijg_cv_inline], + [How to obtain function inlining.]) + +# We cannot check for bogus warnings, but at least we can check for errors +AC_MSG_CHECKING([for broken incomplete types]) +AC_TRY_COMPILE([ typedef struct undefined_structure * undef_struct_ptr; ], + [], + [AC_MSG_RESULT(ok)], + [AC_MSG_RESULT(broken) + AC_DEFINE([INCOMPLETE_TYPES_BROKEN], [1], + [Compiler does not support pointers to unspecified + structures.])]) + +# Test whether global names are unique to at least 15 chars +AC_MSG_CHECKING([for short external names]) +AC_TRY_LINK([ +int possibly_duplicate_function () { return 0; } +int possibly_dupli_function () { return 1; } +], [], + [AC_MSG_RESULT(ok)], + [AC_MSG_RESULT(short) + AC_DEFINE([NEED_SHORT_EXTERNAL_NAMES], [1], + [Linker requires that global names be unique in + first 15 characters.])]) + +# Run-time checks +AC_MSG_CHECKING([to see if char is signed]) +AC_TRY_RUN([ +#ifdef HAVE_STDLIB_H +#include +#endif +#include +#ifdef HAVE_PROTOTYPES +int is_char_signed (int arg) +#else +int is_char_signed (arg) + int arg; +#endif +{ + if (arg == 189) { /* expected result for unsigned char */ + return 0; /* type char is unsigned */ + } + else if (arg != -67) { /* expected result for signed char */ + printf("Hmm, it seems 'char' is not eight bits wide on your machine.\n"); + printf("I fear the JPEG software will not work at all.\n\n"); + } + return 1; /* assume char is signed otherwise */ +} +char signed_char_check = (char) (-67); +int main() { + exit(is_char_signed((int) signed_char_check)); +}], [AC_MSG_RESULT(no) + AC_DEFINE([CHAR_IS_UNSIGNED], [1], + [Characters are unsigned])], + [AC_MSG_RESULT(yes)], +[AC_MSG_WARN([Assuming that char is signed on target machine. + If it is unsigned, this will be a little bit inefficient.]) +]) + +AC_MSG_CHECKING([to see if right shift is signed]) +AC_TRY_RUN([ +#ifdef HAVE_STDLIB_H +#include +#endif +#include +#ifdef HAVE_PROTOTYPES +int is_shifting_signed (long arg) +#else +int is_shifting_signed (arg) + long arg; +#endif +/* See whether right-shift on a long is signed or not. */ +{ + long res = arg >> 4; + + if (res == -0x7F7E80CL) { /* expected result for signed shift */ + return 1; /* right shift is signed */ + } + /* see if unsigned-shift hack will fix it. */ + /* we can't just test exact value since it depends on width of long... */ + res |= (~0L) << (32-4); + if (res == -0x7F7E80CL) { /* expected result now? */ + return 0; /* right shift is unsigned */ + } + printf("Right shift isn't acting as I expect it to.\n"); + printf("I fear the JPEG software will not work at all.\n\n"); + return 0; /* try it with unsigned anyway */ +} +int main() { + exit(is_shifting_signed(-0x7F7E80B1L)); +}], + [AC_MSG_RESULT(no) + AC_DEFINE([RIGHT_SHIFT_IS_UNSIGNED], [1], + [Broken compiler shifts signed values as an unsigned shift.])], + [AC_MSG_RESULT(yes)], + [AC_MSG_RESULT(Assuming that right shift is signed on target machine.)]) + +AC_MSG_CHECKING([to see if fopen accepts b spec]) +AC_TRY_RUN([ +#ifdef HAVE_STDLIB_H +#include +#endif +#include +int main() { + if (fopen("conftestdata", "wb") != NULL) + exit(0); + exit(1); +}], + [AC_MSG_RESULT(yes)], + [AC_MSG_RESULT(no) + AC_DEFINE([DONT_USE_B_MODE], [1], + [Don't open files in binary mode.])], + [AC_MSG_RESULT(Assuming that it does.)]) + +# Configure libtool +AC_LIBTOOL_WIN32_DLL +AC_PROG_LIBTOOL + +# Select memory manager depending on user input. +# If no "-enable-maxmem", use jmemnobs +MEMORYMGR='jmemnobs' +MAXMEM="no" +AC_ARG_ENABLE([maxmem], +[ --enable-maxmem[=N] enable use of temp files, set max mem usage to N MB], +[MAXMEM="$enableval"]) +dnl [# support --with-maxmem for backwards compatibility with IJG V5.] +dnl AC_ARG_WITH(maxmem, , MAXMEM="$withval") +if test "x$MAXMEM" = xyes; then + MAXMEM=1 +fi +if test "x$MAXMEM" != xno; then + if test -n "`echo $MAXMEM | sed 's/[[0-9]]//g'`"; then + AC_MSG_ERROR(non-numeric argument to --enable-maxmem) + fi + DEFAULTMAXMEM=`expr $MAXMEM \* 1048576` + AC_DEFINE_UNQUOTED([DEFAULT_MAX_MEM], [${DEFAULTMAXMEM}], + [Maximum data space library will allocate.]) + AC_MSG_CHECKING([for 'tmpfile()']) + AC_TRY_LINK([#include ], [ FILE * tfile = tmpfile(); ], + [AC_MSG_RESULT(yes) + MEMORYMGR='jmemansi'], + [AC_MSG_RESULT(no) + dnl if tmpfile is not present, must use jmemname. + MEMORYMGR='jmemname' + + # Test for the need to remove temporary files using a signal handler + # (for cjpeg/djpeg) + AC_DEFINE([NEED_SIGNAL_CATCHER], [1], + [Need signal handler to clean up temporary files.]) + AC_MSG_CHECKING([for 'mktemp()']) + AC_TRY_LINK([], [ char fname[80]; mktemp(fname); ], + [AC_MSG_RESULT(yes)], + [AC_MSG_RESULT(no) + AC_DEFINE([NO_MKTEMP], [1], + [The mktemp() function is not available.])])]) +fi +AC_SUBST([MEMORYMGR]) + +# Extract the library version IDs from jpeglib.h. +AC_MSG_CHECKING([libjpeg version number]) +[major=`sed -ne 's/^#define JPEG_LIB_VERSION_MAJOR *\([0-9][0-9]*\).*$/\1/p' $srcdir/jpeglib.h` +minor=`sed -ne 's/^#define JPEG_LIB_VERSION_MINOR *\([0-9][0-9]*\).*$/\1/p' $srcdir/jpeglib.h`] +AC_SUBST([JPEG_LIB_VERSION], + [`expr $major + $minor`:0:$minor]) +AC_MSG_RESULT([$JPEG_LIB_VERSION]) + +AC_CONFIG_FILES([Makefile]) +AC_OUTPUT diff --git a/compat/libjpeg/depcomp b/compat/libjpeg/depcomp new file mode 100755 index 0000000..fc98710 --- /dev/null +++ b/compat/libjpeg/depcomp @@ -0,0 +1,791 @@ +#! /bin/sh +# depcomp - compile a program generating dependencies as side-effects + +scriptversion=2013-05-30.07; # UTC + +# Copyright (C) 1999-2014 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Originally written by Alexandre Oliva . + +case $1 in + '') + echo "$0: No command. Try '$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: depcomp [--help] [--version] PROGRAM [ARGS] + +Run PROGRAMS ARGS to compile a file, generating dependencies +as side-effects. + +Environment variables: + depmode Dependency tracking mode. + source Source file read by 'PROGRAMS ARGS'. + object Object file output by 'PROGRAMS ARGS'. + DEPDIR directory where to store dependencies. + depfile Dependency file to output. + tmpdepfile Temporary file to use when outputting dependencies. + libtool Whether libtool is used (yes/no). + +Report bugs to . +EOF + exit $? + ;; + -v | --v*) + echo "depcomp $scriptversion" + exit $? + ;; +esac + +# Get the directory component of the given path, and save it in the +# global variables '$dir'. Note that this directory component will +# be either empty or ending with a '/' character. This is deliberate. +set_dir_from () +{ + case $1 in + */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;; + *) dir=;; + esac +} + +# Get the suffix-stripped basename of the given path, and save it the +# global variable '$base'. +set_base_from () +{ + base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'` +} + +# If no dependency file was actually created by the compiler invocation, +# we still have to create a dummy depfile, to avoid errors with the +# Makefile "include basename.Plo" scheme. +make_dummy_depfile () +{ + echo "#dummy" > "$depfile" +} + +# Factor out some common post-processing of the generated depfile. +# Requires the auxiliary global variable '$tmpdepfile' to be set. +aix_post_process_depfile () +{ + # If the compiler actually managed to produce a dependency file, + # post-process it. + if test -f "$tmpdepfile"; then + # Each line is of the form 'foo.o: dependency.h'. + # Do two passes, one to just change these to + # $object: dependency.h + # and one to simply output + # dependency.h: + # which is needed to avoid the deleted-header problem. + { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile" + sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile" + } > "$depfile" + rm -f "$tmpdepfile" + else + make_dummy_depfile + fi +} + +# A tabulation character. +tab=' ' +# A newline character. +nl=' +' +# Character ranges might be problematic outside the C locale. +# These definitions help. +upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ +lower=abcdefghijklmnopqrstuvwxyz +digits=0123456789 +alpha=${upper}${lower} + +if test -z "$depmode" || test -z "$source" || test -z "$object"; then + echo "depcomp: Variables source, object and depmode must be set" 1>&2 + exit 1 +fi + +# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. +depfile=${depfile-`echo "$object" | + sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} +tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} + +rm -f "$tmpdepfile" + +# Avoid interferences from the environment. +gccflag= dashmflag= + +# Some modes work just like other modes, but use different flags. We +# parameterize here, but still list the modes in the big case below, +# to make depend.m4 easier to write. Note that we *cannot* use a case +# here, because this file can only contain one case statement. +if test "$depmode" = hp; then + # HP compiler uses -M and no extra arg. + gccflag=-M + depmode=gcc +fi + +if test "$depmode" = dashXmstdout; then + # This is just like dashmstdout with a different argument. + dashmflag=-xM + depmode=dashmstdout +fi + +cygpath_u="cygpath -u -f -" +if test "$depmode" = msvcmsys; then + # This is just like msvisualcpp but w/o cygpath translation. + # Just convert the backslash-escaped backslashes to single forward + # slashes to satisfy depend.m4 + cygpath_u='sed s,\\\\,/,g' + depmode=msvisualcpp +fi + +if test "$depmode" = msvc7msys; then + # This is just like msvc7 but w/o cygpath translation. + # Just convert the backslash-escaped backslashes to single forward + # slashes to satisfy depend.m4 + cygpath_u='sed s,\\\\,/,g' + depmode=msvc7 +fi + +if test "$depmode" = xlc; then + # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information. + gccflag=-qmakedep=gcc,-MF + depmode=gcc +fi + +case "$depmode" in +gcc3) +## gcc 3 implements dependency tracking that does exactly what +## we want. Yay! Note: for some reason libtool 1.4 doesn't like +## it if -MD -MP comes after the -MF stuff. Hmm. +## Unfortunately, FreeBSD c89 acceptance of flags depends upon +## the command line argument order; so add the flags where they +## appear in depend2.am. Note that the slowdown incurred here +## affects only configure: in makefiles, %FASTDEP% shortcuts this. + for arg + do + case $arg in + -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; + *) set fnord "$@" "$arg" ;; + esac + shift # fnord + shift # $arg + done + "$@" + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile" + exit $stat + fi + mv "$tmpdepfile" "$depfile" + ;; + +gcc) +## Note that this doesn't just cater to obsosete pre-3.x GCC compilers. +## but also to in-use compilers like IMB xlc/xlC and the HP C compiler. +## (see the conditional assignment to $gccflag above). +## There are various ways to get dependency output from gcc. Here's +## why we pick this rather obscure method: +## - Don't want to use -MD because we'd like the dependencies to end +## up in a subdir. Having to rename by hand is ugly. +## (We might end up doing this anyway to support other compilers.) +## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like +## -MM, not -M (despite what the docs say). Also, it might not be +## supported by the other compilers which use the 'gcc' depmode. +## - Using -M directly means running the compiler twice (even worse +## than renaming). + if test -z "$gccflag"; then + gccflag=-MD, + fi + "$@" -Wp,"$gccflag$tmpdepfile" + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + # The second -e expression handles DOS-style file names with drive + # letters. + sed -e 's/^[^:]*: / /' \ + -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" +## This next piece of magic avoids the "deleted header file" problem. +## The problem is that when a header file which appears in a .P file +## is deleted, the dependency causes make to die (because there is +## typically no way to rebuild the header). We avoid this by adding +## dummy dependencies for each header file. Too bad gcc doesn't do +## this for us directly. +## Some versions of gcc put a space before the ':'. On the theory +## that the space means something, we add a space to the output as +## well. hp depmode also adds that space, but also prefixes the VPATH +## to the object. Take care to not repeat it in the output. +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + tr ' ' "$nl" < "$tmpdepfile" \ + | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \ + | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +sgi) + if test "$libtool" = yes; then + "$@" "-Wp,-MDupdate,$tmpdepfile" + else + "$@" -MDupdate "$tmpdepfile" + fi + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + + if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files + echo "$object : \\" > "$depfile" + # Clip off the initial element (the dependent). Don't try to be + # clever and replace this with sed code, as IRIX sed won't handle + # lines with more than a fixed number of characters (4096 in + # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; + # the IRIX cc adds comments like '#:fec' to the end of the + # dependency line. + tr ' ' "$nl" < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \ + | tr "$nl" ' ' >> "$depfile" + echo >> "$depfile" + # The second pass generates a dummy entry for each header file. + tr ' ' "$nl" < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ + >> "$depfile" + else + make_dummy_depfile + fi + rm -f "$tmpdepfile" + ;; + +xlc) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +aix) + # The C for AIX Compiler uses -M and outputs the dependencies + # in a .u file. In older versions, this file always lives in the + # current directory. Also, the AIX compiler puts '$object:' at the + # start of each line; $object doesn't have directory information. + # Version 6 uses the directory in both cases. + set_dir_from "$object" + set_base_from "$object" + if test "$libtool" = yes; then + tmpdepfile1=$dir$base.u + tmpdepfile2=$base.u + tmpdepfile3=$dir.libs/$base.u + "$@" -Wc,-M + else + tmpdepfile1=$dir$base.u + tmpdepfile2=$dir$base.u + tmpdepfile3=$dir$base.u + "$@" -M + fi + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + do + test -f "$tmpdepfile" && break + done + aix_post_process_depfile + ;; + +tcc) + # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26 + # FIXME: That version still under development at the moment of writing. + # Make that this statement remains true also for stable, released + # versions. + # It will wrap lines (doesn't matter whether long or short) with a + # trailing '\', as in: + # + # foo.o : \ + # foo.c \ + # foo.h \ + # + # It will put a trailing '\' even on the last line, and will use leading + # spaces rather than leading tabs (at least since its commit 0394caf7 + # "Emit spaces for -MD"). + "$@" -MD -MF "$tmpdepfile" + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'. + # We have to change lines of the first kind to '$object: \'. + sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile" + # And for each line of the second kind, we have to emit a 'dep.h:' + # dummy dependency, to avoid the deleted-header problem. + sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile" + rm -f "$tmpdepfile" + ;; + +## The order of this option in the case statement is important, since the +## shell code in configure will try each of these formats in the order +## listed in this file. A plain '-MD' option would be understood by many +## compilers, so we must ensure this comes after the gcc and icc options. +pgcc) + # Portland's C compiler understands '-MD'. + # Will always output deps to 'file.d' where file is the root name of the + # source file under compilation, even if file resides in a subdirectory. + # The object file name does not affect the name of the '.d' file. + # pgcc 10.2 will output + # foo.o: sub/foo.c sub/foo.h + # and will wrap long lines using '\' : + # foo.o: sub/foo.c ... \ + # sub/foo.h ... \ + # ... + set_dir_from "$object" + # Use the source, not the object, to determine the base name, since + # that's sadly what pgcc will do too. + set_base_from "$source" + tmpdepfile=$base.d + + # For projects that build the same source file twice into different object + # files, the pgcc approach of using the *source* file root name can cause + # problems in parallel builds. Use a locking strategy to avoid stomping on + # the same $tmpdepfile. + lockdir=$base.d-lock + trap " + echo '$0: caught signal, cleaning up...' >&2 + rmdir '$lockdir' + exit 1 + " 1 2 13 15 + numtries=100 + i=$numtries + while test $i -gt 0; do + # mkdir is a portable test-and-set. + if mkdir "$lockdir" 2>/dev/null; then + # This process acquired the lock. + "$@" -MD + stat=$? + # Release the lock. + rmdir "$lockdir" + break + else + # If the lock is being held by a different process, wait + # until the winning process is done or we timeout. + while test -d "$lockdir" && test $i -gt 0; do + sleep 1 + i=`expr $i - 1` + done + fi + i=`expr $i - 1` + done + trap - 1 2 13 15 + if test $i -le 0; then + echo "$0: failed to acquire lock after $numtries attempts" >&2 + echo "$0: check lockdir '$lockdir'" >&2 + exit 1 + fi + + if test $stat -ne 0; then + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + # Each line is of the form `foo.o: dependent.h', + # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" + # Some versions of the HPUX 10.20 sed can't process this invocation + # correctly. Breaking it into two sed invocations is a workaround. + sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \ + | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp2) + # The "hp" stanza above does not work with aCC (C++) and HP's ia64 + # compilers, which have integrated preprocessors. The correct option + # to use with these is +Maked; it writes dependencies to a file named + # 'foo.d', which lands next to the object file, wherever that + # happens to be. + # Much of this is similar to the tru64 case; see comments there. + set_dir_from "$object" + set_base_from "$object" + if test "$libtool" = yes; then + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir.libs/$base.d + "$@" -Wc,+Maked + else + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir$base.d + "$@" +Maked + fi + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile1" "$tmpdepfile2" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile" + # Add 'dependent.h:' lines. + sed -ne '2,${ + s/^ *// + s/ \\*$// + s/$/:/ + p + }' "$tmpdepfile" >> "$depfile" + else + make_dummy_depfile + fi + rm -f "$tmpdepfile" "$tmpdepfile2" + ;; + +tru64) + # The Tru64 compiler uses -MD to generate dependencies as a side + # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'. + # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put + # dependencies in 'foo.d' instead, so we check for that too. + # Subdirectories are respected. + set_dir_from "$object" + set_base_from "$object" + + if test "$libtool" = yes; then + # Libtool generates 2 separate objects for the 2 libraries. These + # two compilations output dependencies in $dir.libs/$base.o.d and + # in $dir$base.o.d. We have to check for both files, because + # one of the two compilations can be disabled. We should prefer + # $dir$base.o.d over $dir.libs/$base.o.d because the latter is + # automatically cleaned when .libs/ is deleted, while ignoring + # the former would cause a distcleancheck panic. + tmpdepfile1=$dir$base.o.d # libtool 1.5 + tmpdepfile2=$dir.libs/$base.o.d # Likewise. + tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504 + "$@" -Wc,-MD + else + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir$base.d + tmpdepfile3=$dir$base.d + "$@" -MD + fi + + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + do + test -f "$tmpdepfile" && break + done + # Same post-processing that is required for AIX mode. + aix_post_process_depfile + ;; + +msvc7) + if test "$libtool" = yes; then + showIncludes=-Wc,-showIncludes + else + showIncludes=-showIncludes + fi + "$@" $showIncludes > "$tmpdepfile" + stat=$? + grep -v '^Note: including file: ' "$tmpdepfile" + if test $stat -ne 0; then + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + # The first sed program below extracts the file names and escapes + # backslashes for cygpath. The second sed program outputs the file + # name when reading, but also accumulates all include files in the + # hold buffer in order to output them again at the end. This only + # works with sed implementations that can handle large buffers. + sed < "$tmpdepfile" -n ' +/^Note: including file: *\(.*\)/ { + s//\1/ + s/\\/\\\\/g + p +}' | $cygpath_u | sort -u | sed -n ' +s/ /\\ /g +s/\(.*\)/'"$tab"'\1 \\/p +s/.\(.*\) \\/\1:/ +H +$ { + s/.*/'"$tab"'/ + G + p +}' >> "$depfile" + echo >> "$depfile" # make sure the fragment doesn't end with a backslash + rm -f "$tmpdepfile" + ;; + +msvc7msys) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +#nosideeffect) + # This comment above is used by automake to tell side-effect + # dependency tracking mechanisms from slower ones. + +dashmstdout) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout, regardless of -o. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + # Remove '-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + test -z "$dashmflag" && dashmflag=-M + # Require at least two characters before searching for ':' + # in the target name. This is to cope with DOS-style filenames: + # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise. + "$@" $dashmflag | + sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + # Some versions of the HPUX 10.20 sed can't process this sed invocation + # correctly. Breaking it into two sed invocations is a workaround. + tr ' ' "$nl" < "$tmpdepfile" \ + | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ + | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +dashXmstdout) + # This case only exists to satisfy depend.m4. It is never actually + # run, as this mode is specially recognized in the preamble. + exit 1 + ;; + +makedepend) + "$@" || exit $? + # Remove any Libtool call + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + # X makedepend + shift + cleared=no eat=no + for arg + do + case $cleared in + no) + set ""; shift + cleared=yes ;; + esac + if test $eat = yes; then + eat=no + continue + fi + case "$arg" in + -D*|-I*) + set fnord "$@" "$arg"; shift ;; + # Strip any option that makedepend may not understand. Remove + # the object too, otherwise makedepend will parse it as a source file. + -arch) + eat=yes ;; + -*|$object) + ;; + *) + set fnord "$@" "$arg"; shift ;; + esac + done + obj_suffix=`echo "$object" | sed 's/^.*\././'` + touch "$tmpdepfile" + ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" + rm -f "$depfile" + # makedepend may prepend the VPATH from the source file name to the object. + # No need to regex-escape $object, excess matching of '.' is harmless. + sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile" + # Some versions of the HPUX 10.20 sed can't process the last invocation + # correctly. Breaking it into two sed invocations is a workaround. + sed '1,2d' "$tmpdepfile" \ + | tr ' ' "$nl" \ + | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ + | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" "$tmpdepfile".bak + ;; + +cpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + # Remove '-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + "$@" -E \ + | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ + -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ + | sed '$ s: \\$::' > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + cat < "$tmpdepfile" >> "$depfile" + sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvisualcpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + IFS=" " + for arg + do + case "$arg" in + -o) + shift + ;; + $object) + shift + ;; + "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") + set fnord "$@" + shift + shift + ;; + *) + set fnord "$@" "$arg" + shift + shift + ;; + esac + done + "$@" -E 2>/dev/null | + sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile" + echo "$tab" >> "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvcmsys) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +none) + exec "$@" + ;; + +*) + echo "Unknown depmode $depmode" 1>&2 + exit 1 + ;; +esac + +exit 0 + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/compat/libjpeg/djpeg.1 b/compat/libjpeg/djpeg.1 new file mode 100755 index 0000000..362e33f --- /dev/null +++ b/compat/libjpeg/djpeg.1 @@ -0,0 +1,257 @@ +.TH DJPEG 1 "26 July 2015" +.SH NAME +djpeg \- decompress a JPEG file to an image file +.SH SYNOPSIS +.B djpeg +[ +.I options +] +[ +.I filename +] +.LP +.SH DESCRIPTION +.LP +.B djpeg +decompresses the named JPEG file, or the standard input if no file is named, +and produces an image file on the standard output. PBMPLUS (PPM/PGM), BMP, +GIF, Targa, or RLE (Utah Raster Toolkit) output format can be selected. +(RLE is supported only if the URT library is available.) +.SH OPTIONS +All switch names may be abbreviated; for example, +.B \-grayscale +may be written +.B \-gray +or +.BR \-gr . +Most of the "basic" switches can be abbreviated to as little as one letter. +Upper and lower case are equivalent (thus +.B \-BMP +is the same as +.BR \-bmp ). +British spellings are also accepted (e.g., +.BR \-greyscale ), +though for brevity these are not mentioned below. +.PP +The basic switches are: +.TP +.BI \-colors " N" +Reduce image to at most N colors. This reduces the number of colors used in +the output image, so that it can be displayed on a colormapped display or +stored in a colormapped file format. For example, if you have an 8-bit +display, you'd need to reduce to 256 or fewer colors. +.TP +.BI \-quantize " N" +Same as +.BR \-colors . +.B \-colors +is the recommended name, +.B \-quantize +is provided only for backwards compatibility. +.TP +.B \-fast +Select recommended processing options for fast, low quality output. (The +default options are chosen for highest quality output.) Currently, this is +equivalent to \fB\-dct fast \-nosmooth \-onepass \-dither ordered\fR. +.TP +.B \-grayscale +Force grayscale output even if JPEG file is color. +Useful for viewing on monochrome displays; also, +.B djpeg +runs noticeably faster in this mode. +.TP +.B \-rgb +Force RGB output even if JPEG file is grayscale. +This is provided to support applications that don't +want to cope with grayscale as a separate case. +.TP +.BI \-scale " M/N" +Scale the output image by a factor M/N. Currently supported scale factors are +M/N with all M from 1 to 16, where N is the source DCT size, which is 8 for +baseline JPEG. If the /N part is omitted, then M specifies the DCT scaled +size to be applied on the given input. For baseline JPEG this is equivalent +to M/8 scaling, since the source DCT size for baseline JPEG is 8. +Scaling is handy if the image is larger than your screen; also, +.B djpeg +runs much faster when scaling down the output. +.TP +.B \-bmp +Select BMP output format (Windows flavor). 8-bit colormapped format is +emitted if +.B \-colors +or +.B \-grayscale +is specified, or if the JPEG file is grayscale; otherwise, 24-bit full-color +format is emitted. +.TP +.B \-gif +Select GIF output format. Since GIF does not support more than 256 colors, +.B \-colors 256 +is assumed (unless you specify a smaller number of colors). +.TP +.B \-os2 +Select BMP output format (OS/2 1.x flavor). 8-bit colormapped format is +emitted if +.B \-colors +or +.B \-grayscale +is specified, or if the JPEG file is grayscale; otherwise, 24-bit full-color +format is emitted. +.TP +.B \-pnm +Select PBMPLUS (PPM/PGM) output format (this is the default format). +PGM is emitted if the JPEG file is grayscale or if +.B \-grayscale +is specified; otherwise PPM is emitted. +.TP +.B \-rle +Select RLE output format. (Requires URT library.) +.TP +.B \-targa +Select Targa output format. Grayscale format is emitted if the JPEG file is +grayscale or if +.B \-grayscale +is specified; otherwise, colormapped format is emitted if +.B \-colors +is specified; otherwise, 24-bit full-color format is emitted. +.PP +Switches for advanced users: +.TP +.B \-dct int +Use integer DCT method (default). +.TP +.B \-dct fast +Use fast integer DCT (less accurate). +.TP +.B \-dct float +Use floating-point DCT method. +The float method is very slightly more accurate than the int method, but is +much slower unless your machine has very fast floating-point hardware. Also +note that results of the floating-point method may vary slightly across +machines, while the integer methods should give the same results everywhere. +The fast integer method is much less accurate than the other two. +.TP +.B \-dither fs +Use Floyd-Steinberg dithering in color quantization. +.TP +.B \-dither ordered +Use ordered dithering in color quantization. +.TP +.B \-dither none +Do not use dithering in color quantization. +By default, Floyd-Steinberg dithering is applied when quantizing colors; this +is slow but usually produces the best results. Ordered dither is a compromise +between speed and quality; no dithering is fast but usually looks awful. Note +that these switches have no effect unless color quantization is being done. +Ordered dither is only available in +.B \-onepass +mode. +.TP +.BI \-map " file" +Quantize to the colors used in the specified image file. This is useful for +producing multiple files with identical color maps, or for forcing a +predefined set of colors to be used. The +.I file +must be a GIF or PPM file. This option overrides +.B \-colors +and +.BR \-onepass . +.TP +.B \-nosmooth +Don't use high-quality upsampling. +.TP +.B \-onepass +Use one-pass instead of two-pass color quantization. The one-pass method is +faster and needs less memory, but it produces a lower-quality image. +.B \-onepass +is ignored unless you also say +.B \-colors +.IR N . +Also, the one-pass method is always used for grayscale output (the two-pass +method is no improvement then). +.TP +.BI \-maxmemory " N" +Set limit for amount of memory to use in processing large images. Value is +in thousands of bytes, or millions of bytes if "M" is attached to the +number. For example, +.B \-max 4m +selects 4000000 bytes. If more space is needed, temporary files will be used. +.TP +.BI \-outfile " name" +Send output image to the named file, not to standard output. +.TP +.B \-verbose +Enable debug printout. More +.BR \-v 's +give more output. Also, version information is printed at startup. +.TP +.B \-debug +Same as +.BR \-verbose . +.SH EXAMPLES +.LP +This example decompresses the JPEG file foo.jpg, quantizes it to +256 colors, and saves the output in 8-bit BMP format in foo.bmp: +.IP +.B djpeg \-colors 256 \-bmp +.I foo.jpg +.B > +.I foo.bmp +.SH HINTS +To get a quick preview of an image, use the +.B \-grayscale +and/or +.B \-scale +switches. +.B \-grayscale \-scale 1/8 +is the fastest case. +.PP +Several options are available that trade off image quality to gain speed. +.B \-fast +turns on the recommended settings. +.PP +.B \-dct fast +and/or +.B \-nosmooth +gain speed at a small sacrifice in quality. +When producing a color-quantized image, +.B \-onepass \-dither ordered +is fast but much lower quality than the default behavior. +.B \-dither none +may give acceptable results in two-pass mode, but is seldom tolerable in +one-pass mode. +.PP +If you are fortunate enough to have very fast floating point hardware, +\fB\-dct float\fR may be even faster than \fB\-dct fast\fR. But on most +machines \fB\-dct float\fR is slower than \fB\-dct int\fR; in this case it is +not worth using, because its theoretical accuracy advantage is too small to be +significant in practice. +.SH ENVIRONMENT +.TP +.B JPEGMEM +If this environment variable is set, its value is the default memory limit. +The value is specified as described for the +.B \-maxmemory +switch. +.B JPEGMEM +overrides the default value specified when the program was compiled, and +itself is overridden by an explicit +.BR \-maxmemory . +.SH SEE ALSO +.BR cjpeg (1), +.BR jpegtran (1), +.BR rdjpgcom (1), +.BR wrjpgcom (1) +.br +.BR ppm (5), +.BR pgm (5) +.br +Wallace, Gregory K. "The JPEG Still Picture Compression Standard", +Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44. +.SH AUTHOR +Independent JPEG Group +.SH BUGS +To avoid the Unisys LZW patent (now expired), +.B djpeg +produces uncompressed GIF files. These are larger than they should be, but +are readable by standard GIF decoders. diff --git a/compat/libjpeg/djpeg.c b/compat/libjpeg/djpeg.c new file mode 100755 index 0000000..2845f30 --- /dev/null +++ b/compat/libjpeg/djpeg.c @@ -0,0 +1,622 @@ +/* + * djpeg.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 2009-2015 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a command-line user interface for the JPEG decompressor. + * It should work on any system with Unix- or MS-DOS-style command lines. + * + * Two different command line styles are permitted, depending on the + * compile-time switch TWO_FILE_COMMANDLINE: + * djpeg [options] inputfile outputfile + * djpeg [options] [inputfile] + * In the second style, output is always to standard output, which you'd + * normally redirect to a file or pipe to some other program. Input is + * either from a named file or from standard input (typically redirected). + * The second style is convenient on Unix but is unhelpful on systems that + * don't support pipes. Also, you MUST use the first style if your system + * doesn't do binary I/O to stdin/stdout. + * To simplify script writing, the "-outfile" switch is provided. The syntax + * djpeg [options] -outfile outputfile inputfile + * works regardless of which command line style is used. + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ +#include "jversion.h" /* for version message */ + +#include /* to declare isprint() */ + +#ifdef USE_CCOMMAND /* command-line reader for Macintosh */ +#ifdef __MWERKS__ +#include /* Metrowerks needs this */ +#include /* ... and this */ +#endif +#ifdef THINK_C +#include /* Think declares it here */ +#endif +#endif + + +/* Create the add-on message string table. */ + +#define JMESSAGE(code,string) string , + +static const char * const cdjpeg_message_table[] = { +#include "cderror.h" + NULL +}; + + +/* + * This list defines the known output image formats + * (not all of which need be supported by a given version). + * You can change the default output format by defining DEFAULT_FMT; + * indeed, you had better do so if you undefine PPM_SUPPORTED. + */ + +typedef enum { + FMT_BMP, /* BMP format (Windows flavor) */ + FMT_GIF, /* GIF format */ + FMT_OS2, /* BMP format (OS/2 flavor) */ + FMT_PPM, /* PPM/PGM (PBMPLUS formats) */ + FMT_RLE, /* RLE format */ + FMT_TARGA, /* Targa format */ + FMT_TIFF /* TIFF format */ +} IMAGE_FORMATS; + +#ifndef DEFAULT_FMT /* so can override from CFLAGS in Makefile */ +#define DEFAULT_FMT FMT_PPM +#endif + +static IMAGE_FORMATS requested_fmt; + + +/* + * Argument-parsing code. + * The switch parser is designed to be useful with DOS-style command line + * syntax, ie, intermixed switches and file names, where only the switches + * to the left of a given file name affect processing of that file. + * The main program in this file doesn't actually use this capability... + */ + + +static const char * progname; /* program name for error messages */ +static char * outfilename; /* for -outfile switch */ + + +LOCAL(void) +usage (void) +/* complain about bad command line */ +{ + fprintf(stderr, "usage: %s [switches] ", progname); +#ifdef TWO_FILE_COMMANDLINE + fprintf(stderr, "inputfile outputfile\n"); +#else + fprintf(stderr, "[inputfile]\n"); +#endif + + fprintf(stderr, "Switches (names may be abbreviated):\n"); + fprintf(stderr, " -colors N Reduce image to no more than N colors\n"); + fprintf(stderr, " -fast Fast, low-quality processing\n"); + fprintf(stderr, " -grayscale Force grayscale output\n"); + fprintf(stderr, " -rgb Force RGB output\n"); +#ifdef IDCT_SCALING_SUPPORTED + fprintf(stderr, " -scale M/N Scale output image by fraction M/N, eg, 1/8\n"); +#endif +#ifdef BMP_SUPPORTED + fprintf(stderr, " -bmp Select BMP output format (Windows style)%s\n", + (DEFAULT_FMT == FMT_BMP ? " (default)" : "")); +#endif +#ifdef GIF_SUPPORTED + fprintf(stderr, " -gif Select GIF output format%s\n", + (DEFAULT_FMT == FMT_GIF ? " (default)" : "")); +#endif +#ifdef BMP_SUPPORTED + fprintf(stderr, " -os2 Select BMP output format (OS/2 style)%s\n", + (DEFAULT_FMT == FMT_OS2 ? " (default)" : "")); +#endif +#ifdef PPM_SUPPORTED + fprintf(stderr, " -pnm Select PBMPLUS (PPM/PGM) output format%s\n", + (DEFAULT_FMT == FMT_PPM ? " (default)" : "")); +#endif +#ifdef RLE_SUPPORTED + fprintf(stderr, " -rle Select Utah RLE output format%s\n", + (DEFAULT_FMT == FMT_RLE ? " (default)" : "")); +#endif +#ifdef TARGA_SUPPORTED + fprintf(stderr, " -targa Select Targa output format%s\n", + (DEFAULT_FMT == FMT_TARGA ? " (default)" : "")); +#endif + fprintf(stderr, "Switches for advanced users:\n"); +#ifdef DCT_ISLOW_SUPPORTED + fprintf(stderr, " -dct int Use integer DCT method%s\n", + (JDCT_DEFAULT == JDCT_ISLOW ? " (default)" : "")); +#endif +#ifdef DCT_IFAST_SUPPORTED + fprintf(stderr, " -dct fast Use fast integer DCT (less accurate)%s\n", + (JDCT_DEFAULT == JDCT_IFAST ? " (default)" : "")); +#endif +#ifdef DCT_FLOAT_SUPPORTED + fprintf(stderr, " -dct float Use floating-point DCT method%s\n", + (JDCT_DEFAULT == JDCT_FLOAT ? " (default)" : "")); +#endif + fprintf(stderr, " -dither fs Use F-S dithering (default)\n"); + fprintf(stderr, " -dither none Don't use dithering in quantization\n"); + fprintf(stderr, " -dither ordered Use ordered dither (medium speed, quality)\n"); +#ifdef QUANT_2PASS_SUPPORTED + fprintf(stderr, " -map FILE Map to colors used in named image file\n"); +#endif + fprintf(stderr, " -nosmooth Don't use high-quality upsampling\n"); +#ifdef QUANT_1PASS_SUPPORTED + fprintf(stderr, " -onepass Use 1-pass quantization (fast, low quality)\n"); +#endif + fprintf(stderr, " -maxmemory N Maximum memory to use (in kbytes)\n"); + fprintf(stderr, " -outfile name Specify name for output file\n"); + fprintf(stderr, " -verbose or -debug Emit debug output\n"); + exit(EXIT_FAILURE); +} + + +LOCAL(int) +parse_switches (j_decompress_ptr cinfo, int argc, char **argv, + int last_file_arg_seen, boolean for_real) +/* Parse optional switches. + * Returns argv[] index of first file-name argument (== argc if none). + * Any file names with indexes <= last_file_arg_seen are ignored; + * they have presumably been processed in a previous iteration. + * (Pass 0 for last_file_arg_seen on the first or only iteration.) + * for_real is FALSE on the first (dummy) pass; we may skip any expensive + * processing. + */ +{ + int argn; + char * arg; + + /* Set up default JPEG parameters. */ + requested_fmt = DEFAULT_FMT; /* set default output file format */ + outfilename = NULL; + cinfo->err->trace_level = 0; + + /* Scan command line options, adjust parameters */ + + for (argn = 1; argn < argc; argn++) { + arg = argv[argn]; + if (*arg != '-') { + /* Not a switch, must be a file name argument */ + if (argn <= last_file_arg_seen) { + outfilename = NULL; /* -outfile applies to just one input file */ + continue; /* ignore this name if previously processed */ + } + break; /* else done parsing switches */ + } + arg++; /* advance past switch marker character */ + + if (keymatch(arg, "bmp", 1)) { + /* BMP output format. */ + requested_fmt = FMT_BMP; + + } else if (keymatch(arg, "colors", 1) || keymatch(arg, "colours", 1) || + keymatch(arg, "quantize", 1) || keymatch(arg, "quantise", 1)) { + /* Do color quantization. */ + int val; + + if (++argn >= argc) /* advance to next argument */ + usage(); + if (sscanf(argv[argn], "%d", &val) != 1) + usage(); + cinfo->desired_number_of_colors = val; + cinfo->quantize_colors = TRUE; + + } else if (keymatch(arg, "dct", 2)) { + /* Select IDCT algorithm. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + if (keymatch(argv[argn], "int", 1)) { + cinfo->dct_method = JDCT_ISLOW; + } else if (keymatch(argv[argn], "fast", 2)) { + cinfo->dct_method = JDCT_IFAST; + } else if (keymatch(argv[argn], "float", 2)) { + cinfo->dct_method = JDCT_FLOAT; + } else + usage(); + + } else if (keymatch(arg, "dither", 2)) { + /* Select dithering algorithm. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + if (keymatch(argv[argn], "fs", 2)) { + cinfo->dither_mode = JDITHER_FS; + } else if (keymatch(argv[argn], "none", 2)) { + cinfo->dither_mode = JDITHER_NONE; + } else if (keymatch(argv[argn], "ordered", 2)) { + cinfo->dither_mode = JDITHER_ORDERED; + } else + usage(); + + } else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) { + /* Enable debug printouts. */ + /* On first -d, print version identification */ + static boolean printed_version = FALSE; + + if (! printed_version) { + fprintf(stderr, "Independent JPEG Group's DJPEG, version %s\n%s\n", + JVERSION, JCOPYRIGHT); + printed_version = TRUE; + } + cinfo->err->trace_level++; + + } else if (keymatch(arg, "fast", 1)) { + /* Select recommended processing options for quick-and-dirty output. */ + cinfo->two_pass_quantize = FALSE; + cinfo->dither_mode = JDITHER_ORDERED; + if (! cinfo->quantize_colors) /* don't override an earlier -colors */ + cinfo->desired_number_of_colors = 216; + cinfo->dct_method = JDCT_FASTEST; + cinfo->do_fancy_upsampling = FALSE; + + } else if (keymatch(arg, "gif", 1)) { + /* GIF output format. */ + requested_fmt = FMT_GIF; + + } else if (keymatch(arg, "grayscale", 2) || keymatch(arg, "greyscale",2)) { + /* Force monochrome output. */ + cinfo->out_color_space = JCS_GRAYSCALE; + + } else if (keymatch(arg, "rgb", 3)) { + /* Force RGB output. */ + cinfo->out_color_space = JCS_RGB; + + } else if (keymatch(arg, "map", 3)) { + /* Quantize to a color map taken from an input file. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + if (for_real) { /* too expensive to do twice! */ +#ifdef QUANT_2PASS_SUPPORTED /* otherwise can't quantize to supplied map */ + FILE * mapfile; + + if ((mapfile = fopen(argv[argn], READ_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]); + exit(EXIT_FAILURE); + } + read_color_map(cinfo, mapfile); + fclose(mapfile); + cinfo->quantize_colors = TRUE; +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } + + } else if (keymatch(arg, "maxmemory", 3)) { + /* Maximum memory in Kb (or Mb with 'm'). */ + long lval; + char ch = 'x'; + + if (++argn >= argc) /* advance to next argument */ + usage(); + if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1) + usage(); + if (ch == 'm' || ch == 'M') + lval *= 1000L; + cinfo->mem->max_memory_to_use = lval * 1000L; + + } else if (keymatch(arg, "nosmooth", 3)) { + /* Suppress fancy upsampling. */ + cinfo->do_fancy_upsampling = FALSE; + + } else if (keymatch(arg, "onepass", 3)) { + /* Use fast one-pass quantization. */ + cinfo->two_pass_quantize = FALSE; + + } else if (keymatch(arg, "os2", 3)) { + /* BMP output format (OS/2 flavor). */ + requested_fmt = FMT_OS2; + + } else if (keymatch(arg, "outfile", 4)) { + /* Set output file name. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + outfilename = argv[argn]; /* save it away for later use */ + + } else if (keymatch(arg, "pnm", 1) || keymatch(arg, "ppm", 1)) { + /* PPM/PGM output format. */ + requested_fmt = FMT_PPM; + + } else if (keymatch(arg, "rle", 1)) { + /* RLE output format. */ + requested_fmt = FMT_RLE; + + } else if (keymatch(arg, "scale", 1)) { + /* Scale the output image by a fraction M/N. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + if (sscanf(argv[argn], "%u/%u", + &cinfo->scale_num, &cinfo->scale_denom) < 1) + usage(); + + } else if (keymatch(arg, "targa", 1)) { + /* Targa output format. */ + requested_fmt = FMT_TARGA; + + } else { + usage(); /* bogus switch */ + } + } + + return argn; /* return index of next arg (file name) */ +} + + +/* + * Marker processor for COM and interesting APPn markers. + * This replaces the library's built-in processor, which just skips the marker. + * We want to print out the marker as text, to the extent possible. + * Note this code relies on a non-suspending data source. + */ + +LOCAL(unsigned int) +jpeg_getc (j_decompress_ptr cinfo) +/* Read next byte */ +{ + struct jpeg_source_mgr * datasrc = cinfo->src; + + if (datasrc->bytes_in_buffer == 0) { + if (! (*datasrc->fill_input_buffer) (cinfo)) + ERREXIT(cinfo, JERR_CANT_SUSPEND); + } + datasrc->bytes_in_buffer--; + return GETJOCTET(*datasrc->next_input_byte++); +} + + +METHODDEF(boolean) +print_text_marker (j_decompress_ptr cinfo) +{ + boolean traceit = (cinfo->err->trace_level >= 1); + INT32 length; + unsigned int ch; + unsigned int lastch = 0; + + length = jpeg_getc(cinfo) << 8; + length += jpeg_getc(cinfo); + length -= 2; /* discount the length word itself */ + + if (traceit) { + if (cinfo->unread_marker == JPEG_COM) + fprintf(stderr, "Comment, length %ld:\n", (long) length); + else /* assume it is an APPn otherwise */ + fprintf(stderr, "APP%d, length %ld:\n", + cinfo->unread_marker - JPEG_APP0, (long) length); + } + + while (--length >= 0) { + ch = jpeg_getc(cinfo); + if (traceit) { + /* Emit the character in a readable form. + * Nonprintables are converted to \nnn form, + * while \ is converted to \\. + * Newlines in CR, CR/LF, or LF form will be printed as one newline. + */ + if (ch == '\r') { + fprintf(stderr, "\n"); + } else if (ch == '\n') { + if (lastch != '\r') + fprintf(stderr, "\n"); + } else if (ch == '\\') { + fprintf(stderr, "\\\\"); + } else if (isprint(ch)) { + putc(ch, stderr); + } else { + fprintf(stderr, "\\%03o", ch); + } + lastch = ch; + } + } + + if (traceit) + fprintf(stderr, "\n"); + + return TRUE; +} + + +/* + * The main program. + */ + +int +main (int argc, char **argv) +{ + struct jpeg_decompress_struct cinfo; + struct jpeg_error_mgr jerr; +#ifdef PROGRESS_REPORT + struct cdjpeg_progress_mgr progress; +#endif + int file_index; + djpeg_dest_ptr dest_mgr = NULL; + FILE * input_file; + FILE * output_file; + JDIMENSION num_scanlines; + + /* On Mac, fetch a command line. */ +#ifdef USE_CCOMMAND + argc = ccommand(&argv); +#endif + + progname = argv[0]; + if (progname == NULL || progname[0] == 0) + progname = "djpeg"; /* in case C library doesn't provide it */ + + /* Initialize the JPEG decompression object with default error handling. */ + cinfo.err = jpeg_std_error(&jerr); + jpeg_create_decompress(&cinfo); + /* Add some application-specific error messages (from cderror.h) */ + jerr.addon_message_table = cdjpeg_message_table; + jerr.first_addon_message = JMSG_FIRSTADDONCODE; + jerr.last_addon_message = JMSG_LASTADDONCODE; + + /* Insert custom marker processor for COM and APP12. + * APP12 is used by some digital camera makers for textual info, + * so we provide the ability to display it as text. + * If you like, additional APPn marker types can be selected for display, + * but don't try to override APP0 or APP14 this way (see libjpeg.doc). + */ + jpeg_set_marker_processor(&cinfo, JPEG_COM, print_text_marker); + jpeg_set_marker_processor(&cinfo, JPEG_APP0+12, print_text_marker); + + /* Now safe to enable signal catcher. */ +#ifdef NEED_SIGNAL_CATCHER + enable_signal_catcher((j_common_ptr) &cinfo); +#endif + + /* Scan command line to find file names. */ + /* It is convenient to use just one switch-parsing routine, but the switch + * values read here are ignored; we will rescan the switches after opening + * the input file. + * (Exception: tracing level set here controls verbosity for COM markers + * found during jpeg_read_header...) + */ + + file_index = parse_switches(&cinfo, argc, argv, 0, FALSE); + +#ifdef TWO_FILE_COMMANDLINE + /* Must have either -outfile switch or explicit output file name */ + if (outfilename == NULL) { + if (file_index != argc-2) { + fprintf(stderr, "%s: must name one input and one output file\n", + progname); + usage(); + } + outfilename = argv[file_index+1]; + } else { + if (file_index != argc-1) { + fprintf(stderr, "%s: must name one input and one output file\n", + progname); + usage(); + } + } +#else + /* Unix style: expect zero or one file name */ + if (file_index < argc-1) { + fprintf(stderr, "%s: only one input file\n", progname); + usage(); + } +#endif /* TWO_FILE_COMMANDLINE */ + + /* Open the input file. */ + if (file_index < argc) { + if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]); + exit(EXIT_FAILURE); + } + } else { + /* default input file is stdin */ + input_file = read_stdin(); + } + + /* Open the output file. */ + if (outfilename != NULL) { + if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open %s\n", progname, outfilename); + exit(EXIT_FAILURE); + } + } else { + /* default output file is stdout */ + output_file = write_stdout(); + } + +#ifdef PROGRESS_REPORT + start_progress_monitor((j_common_ptr) &cinfo, &progress); +#endif + + /* Specify data source for decompression */ + jpeg_stdio_src(&cinfo, input_file); + + /* Read file header, set default decompression parameters */ + (void) jpeg_read_header(&cinfo, TRUE); + + /* Adjust default decompression parameters by re-parsing the options */ + file_index = parse_switches(&cinfo, argc, argv, 0, TRUE); + + /* Initialize the output module now to let it override any crucial + * option settings (for instance, GIF wants to force color quantization). + */ + switch (requested_fmt) { +#ifdef BMP_SUPPORTED + case FMT_BMP: + dest_mgr = jinit_write_bmp(&cinfo, FALSE); + break; + case FMT_OS2: + dest_mgr = jinit_write_bmp(&cinfo, TRUE); + break; +#endif +#ifdef GIF_SUPPORTED + case FMT_GIF: + dest_mgr = jinit_write_gif(&cinfo); + break; +#endif +#ifdef PPM_SUPPORTED + case FMT_PPM: + dest_mgr = jinit_write_ppm(&cinfo); + break; +#endif +#ifdef RLE_SUPPORTED + case FMT_RLE: + dest_mgr = jinit_write_rle(&cinfo); + break; +#endif +#ifdef TARGA_SUPPORTED + case FMT_TARGA: + dest_mgr = jinit_write_targa(&cinfo); + break; +#endif + default: + ERREXIT(&cinfo, JERR_UNSUPPORTED_FORMAT); + break; + } + dest_mgr->output_file = output_file; + + /* Start decompressor */ + (void) jpeg_start_decompress(&cinfo); + + /* Write output file header */ + (*dest_mgr->start_output) (&cinfo, dest_mgr); + + /* Process data */ + while (cinfo.output_scanline < cinfo.output_height) { + num_scanlines = jpeg_read_scanlines(&cinfo, dest_mgr->buffer, + dest_mgr->buffer_height); + (*dest_mgr->put_pixel_rows) (&cinfo, dest_mgr, num_scanlines); + } + +#ifdef PROGRESS_REPORT + /* Hack: count final pass as done in case finish_output does an extra pass. + * The library won't have updated completed_passes. + */ + progress.pub.completed_passes = progress.pub.total_passes; +#endif + + /* Finish decompression and release memory. + * I must do it in this order because output module has allocated memory + * of lifespan JPOOL_IMAGE; it needs to finish before releasing memory. + */ + (*dest_mgr->finish_output) (&cinfo, dest_mgr); + (void) jpeg_finish_decompress(&cinfo); + jpeg_destroy_decompress(&cinfo); + + /* Close files, if we opened them */ + if (input_file != stdin) + fclose(input_file); + if (output_file != stdout) + fclose(output_file); + +#ifdef PROGRESS_REPORT + end_progress_monitor((j_common_ptr) &cinfo); +#endif + + /* All done. */ + exit(jerr.num_warnings ? EXIT_WARNING : EXIT_SUCCESS); + return 0; /* suppress no-return-value warnings */ +} diff --git a/compat/libjpeg/example.c b/compat/libjpeg/example.c new file mode 100755 index 0000000..e21cf12 --- /dev/null +++ b/compat/libjpeg/example.c @@ -0,0 +1,433 @@ +/* + * example.c + * + * This file illustrates how to use the IJG code as a subroutine library + * to read or write JPEG image files. You should look at this code in + * conjunction with the documentation file libjpeg.txt. + * + * This code will not do anything useful as-is, but it may be helpful as a + * skeleton for constructing routines that call the JPEG library. + * + * We present these routines in the same coding style used in the JPEG code + * (ANSI function definitions, etc); but you are of course free to code your + * routines in a different style if you prefer. + */ + +#include + +/* + * Include file for users of JPEG library. + * You will need to have included system headers that define at least + * the typedefs FILE and size_t before you can include jpeglib.h. + * (stdio.h is sufficient on ANSI-conforming systems.) + * You may also wish to include "jerror.h". + */ + +#include "jpeglib.h" + +/* + * is used for the optional error recovery mechanism shown in + * the second part of the example. + */ + +#include + + + +/******************** JPEG COMPRESSION SAMPLE INTERFACE *******************/ + +/* This half of the example shows how to feed data into the JPEG compressor. + * We present a minimal version that does not worry about refinements such + * as error recovery (the JPEG code will just exit() if it gets an error). + */ + + +/* + * IMAGE DATA FORMATS: + * + * The standard input image format is a rectangular array of pixels, with + * each pixel having the same number of "component" values (color channels). + * Each pixel row is an array of JSAMPLEs (which typically are unsigned chars). + * If you are working with color data, then the color values for each pixel + * must be adjacent in the row; for example, R,G,B,R,G,B,R,G,B,... for 24-bit + * RGB color. + * + * For this example, we'll assume that this data structure matches the way + * our application has stored the image in memory, so we can just pass a + * pointer to our image buffer. In particular, let's say that the image is + * RGB color and is described by: + */ + +extern JSAMPLE * image_buffer; /* Points to large array of R,G,B-order data */ +extern int image_height; /* Number of rows in image */ +extern int image_width; /* Number of columns in image */ + + +/* + * Sample routine for JPEG compression. We assume that the target file name + * and a compression quality factor are passed in. + */ + +GLOBAL(void) +write_JPEG_file (char * filename, int quality) +{ + /* This struct contains the JPEG compression parameters and pointers to + * working space (which is allocated as needed by the JPEG library). + * It is possible to have several such structures, representing multiple + * compression/decompression processes, in existence at once. We refer + * to any one struct (and its associated working data) as a "JPEG object". + */ + struct jpeg_compress_struct cinfo; + /* This struct represents a JPEG error handler. It is declared separately + * because applications often want to supply a specialized error handler + * (see the second half of this file for an example). But here we just + * take the easy way out and use the standard error handler, which will + * print a message on stderr and call exit() if compression fails. + * Note that this struct must live as long as the main JPEG parameter + * struct, to avoid dangling-pointer problems. + */ + struct jpeg_error_mgr jerr; + /* More stuff */ + FILE * outfile; /* target file */ + JSAMPROW row_pointer[1]; /* pointer to JSAMPLE row[s] */ + int row_stride; /* physical row width in image buffer */ + + /* Step 1: allocate and initialize JPEG compression object */ + + /* We have to set up the error handler first, in case the initialization + * step fails. (Unlikely, but it could happen if you are out of memory.) + * This routine fills in the contents of struct jerr, and returns jerr's + * address which we place into the link field in cinfo. + */ + cinfo.err = jpeg_std_error(&jerr); + /* Now we can initialize the JPEG compression object. */ + jpeg_create_compress(&cinfo); + + /* Step 2: specify data destination (eg, a file) */ + /* Note: steps 2 and 3 can be done in either order. */ + + /* Here we use the library-supplied code to send compressed data to a + * stdio stream. You can also write your own code to do something else. + * VERY IMPORTANT: use "b" option to fopen() if you are on a machine that + * requires it in order to write binary files. + */ + if ((outfile = fopen(filename, "wb")) == NULL) { + fprintf(stderr, "can't open %s\n", filename); + exit(1); + } + jpeg_stdio_dest(&cinfo, outfile); + + /* Step 3: set parameters for compression */ + + /* First we supply a description of the input image. + * Four fields of the cinfo struct must be filled in: + */ + cinfo.image_width = image_width; /* image width and height, in pixels */ + cinfo.image_height = image_height; + cinfo.input_components = 3; /* # of color components per pixel */ + cinfo.in_color_space = JCS_RGB; /* colorspace of input image */ + /* Now use the library's routine to set default compression parameters. + * (You must set at least cinfo.in_color_space before calling this, + * since the defaults depend on the source color space.) + */ + jpeg_set_defaults(&cinfo); + /* Now you can set any non-default parameters you wish to. + * Here we just illustrate the use of quality (quantization table) scaling: + */ + jpeg_set_quality(&cinfo, quality, TRUE /* limit to baseline-JPEG values */); + + /* Step 4: Start compressor */ + + /* TRUE ensures that we will write a complete interchange-JPEG file. + * Pass TRUE unless you are very sure of what you're doing. + */ + jpeg_start_compress(&cinfo, TRUE); + + /* Step 5: while (scan lines remain to be written) */ + /* jpeg_write_scanlines(...); */ + + /* Here we use the library's state variable cinfo.next_scanline as the + * loop counter, so that we don't have to keep track ourselves. + * To keep things simple, we pass one scanline per call; you can pass + * more if you wish, though. + */ + row_stride = image_width * 3; /* JSAMPLEs per row in image_buffer */ + + while (cinfo.next_scanline < cinfo.image_height) { + /* jpeg_write_scanlines expects an array of pointers to scanlines. + * Here the array is only one element long, but you could pass + * more than one scanline at a time if that's more convenient. + */ + row_pointer[0] = & image_buffer[cinfo.next_scanline * row_stride]; + (void) jpeg_write_scanlines(&cinfo, row_pointer, 1); + } + + /* Step 6: Finish compression */ + + jpeg_finish_compress(&cinfo); + /* After finish_compress, we can close the output file. */ + fclose(outfile); + + /* Step 7: release JPEG compression object */ + + /* This is an important step since it will release a good deal of memory. */ + jpeg_destroy_compress(&cinfo); + + /* And we're done! */ +} + + +/* + * SOME FINE POINTS: + * + * In the above loop, we ignored the return value of jpeg_write_scanlines, + * which is the number of scanlines actually written. We could get away + * with this because we were only relying on the value of cinfo.next_scanline, + * which will be incremented correctly. If you maintain additional loop + * variables then you should be careful to increment them properly. + * Actually, for output to a stdio stream you needn't worry, because + * then jpeg_write_scanlines will write all the lines passed (or else exit + * with a fatal error). Partial writes can only occur if you use a data + * destination module that can demand suspension of the compressor. + * (If you don't know what that's for, you don't need it.) + * + * If the compressor requires full-image buffers (for entropy-coding + * optimization or a multi-scan JPEG file), it will create temporary + * files for anything that doesn't fit within the maximum-memory setting. + * (Note that temp files are NOT needed if you use the default parameters.) + * On some systems you may need to set up a signal handler to ensure that + * temporary files are deleted if the program is interrupted. See libjpeg.txt. + * + * Scanlines MUST be supplied in top-to-bottom order if you want your JPEG + * files to be compatible with everyone else's. If you cannot readily read + * your data in that order, you'll need an intermediate array to hold the + * image. See rdtarga.c or rdbmp.c for examples of handling bottom-to-top + * source data using the JPEG code's internal virtual-array mechanisms. + */ + + + +/******************** JPEG DECOMPRESSION SAMPLE INTERFACE *******************/ + +/* This half of the example shows how to read data from the JPEG decompressor. + * It's a bit more refined than the above, in that we show: + * (a) how to modify the JPEG library's standard error-reporting behavior; + * (b) how to allocate workspace using the library's memory manager. + * + * Just to make this example a little different from the first one, we'll + * assume that we do not intend to put the whole image into an in-memory + * buffer, but to send it line-by-line someplace else. We need a one- + * scanline-high JSAMPLE array as a work buffer, and we will let the JPEG + * memory manager allocate it for us. This approach is actually quite useful + * because we don't need to remember to deallocate the buffer separately: it + * will go away automatically when the JPEG object is cleaned up. + */ + + +/* + * ERROR HANDLING: + * + * The JPEG library's standard error handler (jerror.c) is divided into + * several "methods" which you can override individually. This lets you + * adjust the behavior without duplicating a lot of code, which you might + * have to update with each future release. + * + * Our example here shows how to override the "error_exit" method so that + * control is returned to the library's caller when a fatal error occurs, + * rather than calling exit() as the standard error_exit method does. + * + * We use C's setjmp/longjmp facility to return control. This means that the + * routine which calls the JPEG library must first execute a setjmp() call to + * establish the return point. We want the replacement error_exit to do a + * longjmp(). But we need to make the setjmp buffer accessible to the + * error_exit routine. To do this, we make a private extension of the + * standard JPEG error handler object. (If we were using C++, we'd say we + * were making a subclass of the regular error handler.) + * + * Here's the extended error handler struct: + */ + +struct my_error_mgr { + struct jpeg_error_mgr pub; /* "public" fields */ + + jmp_buf setjmp_buffer; /* for return to caller */ +}; + +typedef struct my_error_mgr * my_error_ptr; + +/* + * Here's the routine that will replace the standard error_exit method: + */ + +METHODDEF(void) +my_error_exit (j_common_ptr cinfo) +{ + /* cinfo->err really points to a my_error_mgr struct, so coerce pointer */ + my_error_ptr myerr = (my_error_ptr) cinfo->err; + + /* Always display the message. */ + /* We could postpone this until after returning, if we chose. */ + (*cinfo->err->output_message) (cinfo); + + /* Return control to the setjmp point */ + longjmp(myerr->setjmp_buffer, 1); +} + + +/* + * Sample routine for JPEG decompression. We assume that the source file name + * is passed in. We want to return 1 on success, 0 on error. + */ + + +GLOBAL(int) +read_JPEG_file (char * filename) +{ + /* This struct contains the JPEG decompression parameters and pointers to + * working space (which is allocated as needed by the JPEG library). + */ + struct jpeg_decompress_struct cinfo; + /* We use our private extension JPEG error handler. + * Note that this struct must live as long as the main JPEG parameter + * struct, to avoid dangling-pointer problems. + */ + struct my_error_mgr jerr; + /* More stuff */ + FILE * infile; /* source file */ + JSAMPARRAY buffer; /* Output row buffer */ + int row_stride; /* physical row width in output buffer */ + + /* In this example we want to open the input file before doing anything else, + * so that the setjmp() error recovery below can assume the file is open. + * VERY IMPORTANT: use "b" option to fopen() if you are on a machine that + * requires it in order to read binary files. + */ + + if ((infile = fopen(filename, "rb")) == NULL) { + fprintf(stderr, "can't open %s\n", filename); + return 0; + } + + /* Step 1: allocate and initialize JPEG decompression object */ + + /* We set up the normal JPEG error routines, then override error_exit. */ + cinfo.err = jpeg_std_error(&jerr.pub); + jerr.pub.error_exit = my_error_exit; + /* Establish the setjmp return context for my_error_exit to use. */ + if (setjmp(jerr.setjmp_buffer)) { + /* If we get here, the JPEG code has signaled an error. + * We need to clean up the JPEG object, close the input file, and return. + */ + jpeg_destroy_decompress(&cinfo); + fclose(infile); + return 0; + } + /* Now we can initialize the JPEG decompression object. */ + jpeg_create_decompress(&cinfo); + + /* Step 2: specify data source (eg, a file) */ + + jpeg_stdio_src(&cinfo, infile); + + /* Step 3: read file parameters with jpeg_read_header() */ + + (void) jpeg_read_header(&cinfo, TRUE); + /* We can ignore the return value from jpeg_read_header since + * (a) suspension is not possible with the stdio data source, and + * (b) we passed TRUE to reject a tables-only JPEG file as an error. + * See libjpeg.txt for more info. + */ + + /* Step 4: set parameters for decompression */ + + /* In this example, we don't need to change any of the defaults set by + * jpeg_read_header(), so we do nothing here. + */ + + /* Step 5: Start decompressor */ + + (void) jpeg_start_decompress(&cinfo); + /* We can ignore the return value since suspension is not possible + * with the stdio data source. + */ + + /* We may need to do some setup of our own at this point before reading + * the data. After jpeg_start_decompress() we have the correct scaled + * output image dimensions available, as well as the output colormap + * if we asked for color quantization. + * In this example, we need to make an output work buffer of the right size. + */ + /* JSAMPLEs per row in output buffer */ + row_stride = cinfo.output_width * cinfo.output_components; + /* Make a one-row-high sample array that will go away when done with image */ + buffer = (*cinfo.mem->alloc_sarray) + ((j_common_ptr) &cinfo, JPOOL_IMAGE, row_stride, 1); + + /* Step 6: while (scan lines remain to be read) */ + /* jpeg_read_scanlines(...); */ + + /* Here we use the library's state variable cinfo.output_scanline as the + * loop counter, so that we don't have to keep track ourselves. + */ + while (cinfo.output_scanline < cinfo.output_height) { + /* jpeg_read_scanlines expects an array of pointers to scanlines. + * Here the array is only one element long, but you could ask for + * more than one scanline at a time if that's more convenient. + */ + (void) jpeg_read_scanlines(&cinfo, buffer, 1); + /* Assume put_scanline_someplace wants a pointer and sample count. */ + put_scanline_someplace(buffer[0], row_stride); + } + + /* Step 7: Finish decompression */ + + (void) jpeg_finish_decompress(&cinfo); + /* We can ignore the return value since suspension is not possible + * with the stdio data source. + */ + + /* Step 8: Release JPEG decompression object */ + + /* This is an important step since it will release a good deal of memory. */ + jpeg_destroy_decompress(&cinfo); + + /* After finish_decompress, we can close the input file. + * Here we postpone it until after no more JPEG errors are possible, + * so as to simplify the setjmp error logic above. (Actually, I don't + * think that jpeg_destroy can do an error exit, but why assume anything...) + */ + fclose(infile); + + /* At this point you may want to check to see whether any corrupt-data + * warnings occurred (test whether jerr.pub.num_warnings is nonzero). + */ + + /* And we're done! */ + return 1; +} + + +/* + * SOME FINE POINTS: + * + * In the above code, we ignored the return value of jpeg_read_scanlines, + * which is the number of scanlines actually read. We could get away with + * this because we asked for only one line at a time and we weren't using + * a suspending data source. See libjpeg.txt for more info. + * + * We cheated a bit by calling alloc_sarray() after jpeg_start_decompress(); + * we should have done it beforehand to ensure that the space would be + * counted against the JPEG max_memory setting. In some systems the above + * code would risk an out-of-memory error. However, in general we don't + * know the output image dimensions before jpeg_start_decompress(), unless we + * call jpeg_calc_output_dimensions(). See libjpeg.txt for more about this. + * + * Scanlines are returned in the same order as they appear in the JPEG file, + * which is standardly top-to-bottom. If you must emit data bottom-to-top, + * you can use one of the virtual arrays provided by the JPEG memory manager + * to invert the data. See wrbmp.c for an example. + * + * As with compression, some operating modes may require temporary files. + * On some systems you may need to set up a signal handler to ensure that + * temporary files are deleted if the program is interrupted. See libjpeg.txt. + */ diff --git a/compat/libjpeg/filelist.txt b/compat/libjpeg/filelist.txt new file mode 100755 index 0000000..62aba52 --- /dev/null +++ b/compat/libjpeg/filelist.txt @@ -0,0 +1,215 @@ +IJG JPEG LIBRARY: FILE LIST + +Copyright (C) 1994-2013, Thomas G. Lane, Guido Vollbeding. +This file is part of the Independent JPEG Group's software. +For conditions of distribution and use, see the accompanying README file. + + +Here is a road map to the files in the IJG JPEG distribution. The +distribution includes the JPEG library proper, plus two application +programs ("cjpeg" and "djpeg") which use the library to convert JPEG +files to and from some other popular image formats. A third application +"jpegtran" uses the library to do lossless conversion between different +variants of JPEG. There are also two stand-alone applications, +"rdjpgcom" and "wrjpgcom". + + +THE JPEG LIBRARY +================ + +Include files: + +jpeglib.h JPEG library's exported data and function declarations. +jconfig.h Configuration declarations. Note: this file is not present + in the distribution; it is generated during installation. +jmorecfg.h Additional configuration declarations; need not be changed + for a standard installation. +jerror.h Declares JPEG library's error and trace message codes. +jinclude.h Central include file used by all IJG .c files to reference + system include files. +jpegint.h JPEG library's internal data structures. +jdct.h Private declarations for forward & reverse DCT subsystems. +jmemsys.h Private declarations for memory management subsystem. +jversion.h Version information. + +Applications using the library should include jpeglib.h (which in turn +includes jconfig.h and jmorecfg.h). Optionally, jerror.h may be included +if the application needs to reference individual JPEG error codes. The +other include files are intended for internal use and would not normally +be included by an application program. (cjpeg/djpeg/etc do use jinclude.h, +since its function is to improve portability of the whole IJG distribution. +Most other applications will directly include the system include files they +want, and hence won't need jinclude.h.) + + +C source code files: + +These files contain most of the functions intended to be called directly by +an application program: + +jcapimin.c Application program interface: core routines for compression. +jcapistd.c Application program interface: standard compression. +jdapimin.c Application program interface: core routines for decompression. +jdapistd.c Application program interface: standard decompression. +jcomapi.c Application program interface routines common to compression + and decompression. +jcparam.c Compression parameter setting helper routines. +jctrans.c API and library routines for transcoding compression. +jdtrans.c API and library routines for transcoding decompression. + +Compression side of the library: + +jcinit.c Initialization: determines which other modules to use. +jcmaster.c Master control: setup and inter-pass sequencing logic. +jcmainct.c Main buffer controller (preprocessor => JPEG compressor). +jcprepct.c Preprocessor buffer controller. +jccoefct.c Buffer controller for DCT coefficient buffer. +jccolor.c Color space conversion. +jcsample.c Downsampling. +jcdctmgr.c DCT manager (DCT implementation selection & control). +jfdctint.c Forward DCT using slow-but-accurate integer method. +jfdctfst.c Forward DCT using faster, less accurate integer method. +jfdctflt.c Forward DCT using floating-point arithmetic. +jchuff.c Huffman entropy coding. +jcarith.c Arithmetic entropy coding. +jcmarker.c JPEG marker writing. +jdatadst.c Data destination managers for memory and stdio output. + +Decompression side of the library: + +jdmaster.c Master control: determines which other modules to use. +jdinput.c Input controller: controls input processing modules. +jdmainct.c Main buffer controller (JPEG decompressor => postprocessor). +jdcoefct.c Buffer controller for DCT coefficient buffer. +jdpostct.c Postprocessor buffer controller. +jdmarker.c JPEG marker reading. +jdhuff.c Huffman entropy decoding. +jdarith.c Arithmetic entropy decoding. +jddctmgr.c IDCT manager (IDCT implementation selection & control). +jidctint.c Inverse DCT using slow-but-accurate integer method. +jidctfst.c Inverse DCT using faster, less accurate integer method. +jidctflt.c Inverse DCT using floating-point arithmetic. +jdsample.c Upsampling. +jdcolor.c Color space conversion. +jdmerge.c Merged upsampling/color conversion (faster, lower quality). +jquant1.c One-pass color quantization using a fixed-spacing colormap. +jquant2.c Two-pass color quantization using a custom-generated colormap. + Also handles one-pass quantization to an externally given map. +jdatasrc.c Data source managers for memory and stdio input. + +Support files for both compression and decompression: + +jaricom.c Tables for common use in arithmetic entropy encoding and + decoding routines. +jerror.c Standard error handling routines (application replaceable). +jmemmgr.c System-independent (more or less) memory management code. +jutils.c Miscellaneous utility routines. + +jmemmgr.c relies on a system-dependent memory management module. The IJG +distribution includes the following implementations of the system-dependent +module: + +jmemnobs.c "No backing store": assumes adequate virtual memory exists. +jmemansi.c Makes temporary files with ANSI-standard routine tmpfile(). +jmemname.c Makes temporary files with program-generated file names. +jmemdos.c Custom implementation for MS-DOS (16-bit environment only): + can use extended and expanded memory as well as temp files. +jmemmac.c Custom implementation for Apple Macintosh. + +Exactly one of the system-dependent modules should be configured into an +installed JPEG library (see install.txt for hints about which one to use). +On unusual systems you may find it worthwhile to make a special +system-dependent memory manager. + + +Non-C source code files: + +jmemdosa.asm 80x86 assembly code support for jmemdos.c; used only in + MS-DOS-specific configurations of the JPEG library. + + +CJPEG/DJPEG/JPEGTRAN +==================== + +Include files: + +cdjpeg.h Declarations shared by cjpeg/djpeg/jpegtran modules. +cderror.h Additional error and trace message codes for cjpeg et al. +transupp.h Declarations for jpegtran support routines in transupp.c. + +C source code files: + +cjpeg.c Main program for cjpeg. +djpeg.c Main program for djpeg. +jpegtran.c Main program for jpegtran. +cdjpeg.c Utility routines used by all three programs. +rdcolmap.c Code to read a colormap file for djpeg's "-map" switch. +rdswitch.c Code to process some of cjpeg's more complex switches. + Also used by jpegtran. +transupp.c Support code for jpegtran: lossless image manipulations. + +Image file reader modules for cjpeg: + +rdbmp.c BMP file input. +rdgif.c GIF file input (now just a stub). +rdppm.c PPM/PGM file input. +rdrle.c Utah RLE file input. +rdtarga.c Targa file input. + +Image file writer modules for djpeg: + +wrbmp.c BMP file output. +wrgif.c GIF file output (a mere shadow of its former self). +wrppm.c PPM/PGM file output. +wrrle.c Utah RLE file output. +wrtarga.c Targa file output. + + +RDJPGCOM/WRJPGCOM +================= + +C source code files: + +rdjpgcom.c Stand-alone rdjpgcom application. +wrjpgcom.c Stand-alone wrjpgcom application. + +These programs do not depend on the IJG library. They do use +jconfig.h and jinclude.h, only to improve portability. + + +ADDITIONAL FILES +================ + +Documentation (see README for a guide to the documentation files): + +README Master documentation file. +*.txt Other documentation files. +*.1 Documentation in Unix man page format. +change.log Version-to-version change highlights. +example.c Sample code for calling JPEG library. + +Configuration/installation files and programs (see install.txt for more info): + +configure Unix shell script to perform automatic configuration. +configure.ac Source file for use with Autoconf to generate configure. +ltmain.sh Support scripts for configure (from GNU libtool). +config.guess +config.sub +depcomp +missing +ar-lib +compile +install-sh Install shell script for those Unix systems lacking one. +Makefile.in Makefile input for configure. +Makefile.am Source file for use with Automake to generate Makefile.in. +ckconfig.c Program to generate jconfig.h on non-Unix systems. +jconfig.txt Template for making jconfig.h by hand. +mak*.* Sample makefiles for particular systems. +jconfig.* Sample jconfig.h for particular systems. +libjpeg.map Script to generate shared library with versioned symbols. +aclocal.m4 M4 macro definitions for use with Autoconf. + +Test files (see install.txt for test procedure): + +test*.* Source and comparison files for confidence test. + These are binary image files, NOT text files. diff --git a/compat/libjpeg/install-sh b/compat/libjpeg/install-sh new file mode 100755 index 0000000..0b0fdcb --- /dev/null +++ b/compat/libjpeg/install-sh @@ -0,0 +1,501 @@ +#!/bin/sh +# install - install a program, script, or datafile + +scriptversion=2013-12-25.23; # UTC + +# This originates from X11R5 (mit/util/scripts/install.sh), which was +# later released in X11R6 (xc/config/util/install.sh) with the +# following copyright and license. +# +# Copyright (C) 1994 X Consortium +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to +# deal in the Software without restriction, including without limitation the +# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +# sell copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- +# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +# +# Except as contained in this notice, the name of the X Consortium shall not +# be used in advertising or otherwise to promote the sale, use or other deal- +# ings in this Software without prior written authorization from the X Consor- +# tium. +# +# +# FSF changes to this file are in the public domain. +# +# Calling this script install-sh is preferred over install.sh, to prevent +# 'make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# This script is compatible with the BSD install script, but was written +# from scratch. + +tab=' ' +nl=' +' +IFS=" $tab$nl" + +# Set DOITPROG to "echo" to test this script. + +doit=${DOITPROG-} +doit_exec=${doit:-exec} + +# Put in absolute file names if you don't have them in your path; +# or use environment vars. + +chgrpprog=${CHGRPPROG-chgrp} +chmodprog=${CHMODPROG-chmod} +chownprog=${CHOWNPROG-chown} +cmpprog=${CMPPROG-cmp} +cpprog=${CPPROG-cp} +mkdirprog=${MKDIRPROG-mkdir} +mvprog=${MVPROG-mv} +rmprog=${RMPROG-rm} +stripprog=${STRIPPROG-strip} + +posix_mkdir= + +# Desired mode of installed file. +mode=0755 + +chgrpcmd= +chmodcmd=$chmodprog +chowncmd= +mvcmd=$mvprog +rmcmd="$rmprog -f" +stripcmd= + +src= +dst= +dir_arg= +dst_arg= + +copy_on_change=false +is_target_a_directory=possibly + +usage="\ +Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE + or: $0 [OPTION]... SRCFILES... DIRECTORY + or: $0 [OPTION]... -t DIRECTORY SRCFILES... + or: $0 [OPTION]... -d DIRECTORIES... + +In the 1st form, copy SRCFILE to DSTFILE. +In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. +In the 4th, create DIRECTORIES. + +Options: + --help display this help and exit. + --version display version info and exit. + + -c (ignored) + -C install only if different (preserve the last data modification time) + -d create directories instead of installing files. + -g GROUP $chgrpprog installed files to GROUP. + -m MODE $chmodprog installed files to MODE. + -o USER $chownprog installed files to USER. + -s $stripprog installed files. + -t DIRECTORY install into DIRECTORY. + -T report an error if DSTFILE is a directory. + +Environment variables override the default commands: + CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG + RMPROG STRIPPROG +" + +while test $# -ne 0; do + case $1 in + -c) ;; + + -C) copy_on_change=true;; + + -d) dir_arg=true;; + + -g) chgrpcmd="$chgrpprog $2" + shift;; + + --help) echo "$usage"; exit $?;; + + -m) mode=$2 + case $mode in + *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*) + echo "$0: invalid mode: $mode" >&2 + exit 1;; + esac + shift;; + + -o) chowncmd="$chownprog $2" + shift;; + + -s) stripcmd=$stripprog;; + + -t) + is_target_a_directory=always + dst_arg=$2 + # Protect names problematic for 'test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac + shift;; + + -T) is_target_a_directory=never;; + + --version) echo "$0 $scriptversion"; exit $?;; + + --) shift + break;; + + -*) echo "$0: invalid option: $1" >&2 + exit 1;; + + *) break;; + esac + shift +done + +# We allow the use of options -d and -T together, by making -d +# take the precedence; this is for compatibility with GNU install. + +if test -n "$dir_arg"; then + if test -n "$dst_arg"; then + echo "$0: target directory not allowed when installing a directory." >&2 + exit 1 + fi +fi + +if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then + # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dst_arg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dst_arg" + shift # fnord + fi + shift # arg + dst_arg=$arg + # Protect names problematic for 'test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac + done +fi + +if test $# -eq 0; then + if test -z "$dir_arg"; then + echo "$0: no input file specified." >&2 + exit 1 + fi + # It's OK to call 'install-sh -d' without argument. + # This can happen when creating conditional directories. + exit 0 +fi + +if test -z "$dir_arg"; then + if test $# -gt 1 || test "$is_target_a_directory" = always; then + if test ! -d "$dst_arg"; then + echo "$0: $dst_arg: Is not a directory." >&2 + exit 1 + fi + fi +fi + +if test -z "$dir_arg"; then + do_exit='(exit $ret); exit $ret' + trap "ret=129; $do_exit" 1 + trap "ret=130; $do_exit" 2 + trap "ret=141; $do_exit" 13 + trap "ret=143; $do_exit" 15 + + # Set umask so as not to create temps with too-generous modes. + # However, 'strip' requires both read and write access to temps. + case $mode in + # Optimize common cases. + *644) cp_umask=133;; + *755) cp_umask=22;; + + *[0-7]) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw='% 200' + fi + cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; + *) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw=,u+rw + fi + cp_umask=$mode$u_plus_rw;; + esac +fi + +for src +do + # Protect names problematic for 'test' and other utilities. + case $src in + -* | [=\(\)!]) src=./$src;; + esac + + if test -n "$dir_arg"; then + dst=$src + dstdir=$dst + test -d "$dstdir" + dstdir_status=$? + else + + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + if test ! -f "$src" && test ! -d "$src"; then + echo "$0: $src does not exist." >&2 + exit 1 + fi + + if test -z "$dst_arg"; then + echo "$0: no destination specified." >&2 + exit 1 + fi + dst=$dst_arg + + # If destination is a directory, append the input filename; won't work + # if double slashes aren't ignored. + if test -d "$dst"; then + if test "$is_target_a_directory" = never; then + echo "$0: $dst_arg: Is a directory" >&2 + exit 1 + fi + dstdir=$dst + dst=$dstdir/`basename "$src"` + dstdir_status=0 + else + dstdir=`dirname "$dst"` + test -d "$dstdir" + dstdir_status=$? + fi + fi + + obsolete_mkdir_used=false + + if test $dstdir_status != 0; then + case $posix_mkdir in + '') + # Create intermediate dirs using mode 755 as modified by the umask. + # This is like FreeBSD 'install' as of 1997-10-28. + umask=`umask` + case $stripcmd.$umask in + # Optimize common cases. + *[2367][2367]) mkdir_umask=$umask;; + .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; + + *[0-7]) + mkdir_umask=`expr $umask + 22 \ + - $umask % 100 % 40 + $umask % 20 \ + - $umask % 10 % 4 + $umask % 2 + `;; + *) mkdir_umask=$umask,go-w;; + esac + + # With -d, create the new directory with the user-specified mode. + # Otherwise, rely on $mkdir_umask. + if test -n "$dir_arg"; then + mkdir_mode=-m$mode + else + mkdir_mode= + fi + + posix_mkdir=false + case $umask in + *[123567][0-7][0-7]) + # POSIX mkdir -p sets u+wx bits regardless of umask, which + # is incompatible with FreeBSD 'install' when (umask & 300) != 0. + ;; + *) + tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ + trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 + + if (umask $mkdir_umask && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 + then + if test -z "$dir_arg" || { + # Check for POSIX incompatibilities with -m. + # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or + # other-writable bit of parent directory when it shouldn't. + # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. + ls_ld_tmpdir=`ls -ld "$tmpdir"` + case $ls_ld_tmpdir in + d????-?r-*) different_mode=700;; + d????-?--*) different_mode=755;; + *) false;; + esac && + $mkdirprog -m$different_mode -p -- "$tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$tmpdir"` + test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" + } + } + then posix_mkdir=: + fi + rmdir "$tmpdir/d" "$tmpdir" + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null + fi + trap '' 0;; + esac;; + esac + + if + $posix_mkdir && ( + umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" + ) + then : + else + + # The umask is ridiculous, or mkdir does not conform to POSIX, + # or it failed possibly due to a race condition. Create the + # directory the slow way, step by step, checking for races as we go. + + case $dstdir in + /*) prefix='/';; + [-=\(\)!]*) prefix='./';; + *) prefix='';; + esac + + oIFS=$IFS + IFS=/ + set -f + set fnord $dstdir + shift + set +f + IFS=$oIFS + + prefixes= + + for d + do + test X"$d" = X && continue + + prefix=$prefix$d + if test -d "$prefix"; then + prefixes= + else + if $posix_mkdir; then + (umask=$mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break + # Don't fail if two instances are running concurrently. + test -d "$prefix" || exit 1 + else + case $prefix in + *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; + *) qprefix=$prefix;; + esac + prefixes="$prefixes '$qprefix'" + fi + fi + prefix=$prefix/ + done + + if test -n "$prefixes"; then + # Don't fail if two instances are running concurrently. + (umask $mkdir_umask && + eval "\$doit_exec \$mkdirprog $prefixes") || + test -d "$dstdir" || exit 1 + obsolete_mkdir_used=true + fi + fi + fi + + if test -n "$dir_arg"; then + { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && + { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || + test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 + else + + # Make a couple of temp file names in the proper directory. + dsttmp=$dstdir/_inst.$$_ + rmtmp=$dstdir/_rm.$$_ + + # Trap to clean up those temp files at exit. + trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 + + # Copy the file name to the temp name. + (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && + + # and set any options; do chmod last to preserve setuid bits. + # + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $cpprog $src $dsttmp" command. + # + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && + { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && + { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && + + # If -C, don't bother to copy if it wouldn't change the file. + if $copy_on_change && + old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && + new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && + set -f && + set X $old && old=:$2:$4:$5:$6 && + set X $new && new=:$2:$4:$5:$6 && + set +f && + test "$old" = "$new" && + $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 + then + rm -f "$dsttmp" + else + # Rename the file to the real destination. + $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || + + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + { + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + test ! -f "$dst" || + $doit $rmcmd -f "$dst" 2>/dev/null || + { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && + { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } + } || + { echo "$0: cannot unlink or rename $dst" >&2 + (exit 1); exit 1 + } + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dst" + } + fi || exit 1 + + trap '' 0 + fi +done + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/compat/libjpeg/install.txt b/compat/libjpeg/install.txt new file mode 100755 index 0000000..44a14a2 --- /dev/null +++ b/compat/libjpeg/install.txt @@ -0,0 +1,1107 @@ +INSTALLATION INSTRUCTIONS for the Independent JPEG Group's JPEG software + +Copyright (C) 1991-2015, Thomas G. Lane, Guido Vollbeding. +This file is part of the Independent JPEG Group's software. +For conditions of distribution and use, see the accompanying README file. + + +This file explains how to configure and install the IJG software. We have +tried to make this software extremely portable and flexible, so that it can be +adapted to almost any environment. The downside of this decision is that the +installation process is complicated. We have provided shortcuts to simplify +the task on common systems. But in any case, you will need at least a little +familiarity with C programming and program build procedures for your system. + +If you are only using this software as part of a larger program, the larger +program's installation procedure may take care of configuring the IJG code. +For example, Ghostscript's installation script will configure the IJG code. +You don't need to read this file if you just want to compile Ghostscript. + +If you are on a Unix machine, you may not need to read this file at all. +Try doing + ./configure + make + make test +If that doesn't complain, do + make install +(better do "make -n install" first to see if the makefile will put the files +where you want them). Read further if you run into snags or want to customize +the code for your system. + + +TABLE OF CONTENTS +----------------- + +Before you start +Configuring the software: + using the automatic "configure" script + using one of the supplied jconfig and makefile files + by hand +Building the software +Testing the software +Installing the software +Optional stuff +Optimization +Hints for specific systems + + +BEFORE YOU START +================ + +Before installing the software you must unpack the distributed source code. +Since you are reading this file, you have probably already succeeded in this +task. However, there is a potential for error if you needed to convert the +files to the local standard text file format (for example, if you are on +MS-DOS you may have converted LF end-of-line to CR/LF). You must apply +such conversion to all the files EXCEPT those whose names begin with "test". +The test files contain binary data; if you change them in any way then the +self-test will give bad results. + +Please check the last section of this file to see if there are hints for the +specific machine or compiler you are using. + + +CONFIGURING THE SOFTWARE +======================== + +To configure the IJG code for your system, you need to create two files: + * jconfig.h: contains values for system-dependent #define symbols. + * Makefile: controls the compilation process. +(On a non-Unix machine, you may create "project files" or some other +substitute for a Makefile. jconfig.h is needed in any environment.) + +We provide three different ways to generate these files: + * On a Unix system, you can just run the "configure" script. + * We provide sample jconfig files and makefiles for popular machines; + if your machine matches one of the samples, just copy the right sample + files to jconfig.h and Makefile. + * If all else fails, read the instructions below and make your own files. + + +Configuring the software using the automatic "configure" script +--------------------------------------------------------------- + +If you are on a Unix machine, you can just type + ./configure +and let the configure script construct appropriate configuration files. +If you're using "csh" on an old version of System V, you might need to type + sh configure +instead to prevent csh from trying to execute configure itself. +Expect configure to run for a few minutes, particularly on slower machines; +it works by compiling a series of test programs. + +Configure was created with GNU Autoconf and it follows the usual conventions +for GNU configure scripts. It makes a few assumptions that you may want to +override. You can do this by providing optional switches to configure: + +* Configure will build both static and shared libraries, if possible. +If you want to build libjpeg only as a static library, say + ./configure --disable-shared +If you want to build libjpeg only as a shared library, say + ./configure --disable-static +Configure uses GNU libtool to take care of system-dependent shared library +building methods. + +* Configure will use gcc (GNU C compiler) if it's available, otherwise cc. +To force a particular compiler to be selected, use the CC option, for example + ./configure CC='cc' +The same method can be used to include any unusual compiler switches. +For example, on HP-UX you probably want to say + ./configure CC='cc -Aa' +to get HP's compiler to run in ANSI mode. + +* The default CFLAGS setting is "-g" for non-gcc compilers, "-g -O2" for gcc. +You can override this by saying, for example, + ./configure CFLAGS='-O2' +if you want to compile without debugging support. + +* Configure will set up the makefile so that "make install" will install files +into /usr/local/bin, /usr/local/man, etc. You can specify an installation +prefix other than "/usr/local" by giving configure the option "--prefix=PATH". + +* If you don't have a lot of swap space, you may need to enable the IJG +software's internal virtual memory mechanism. To do this, give the option +"--enable-maxmem=N" where N is the default maxmemory limit in megabytes. +This is discussed in more detail under "Selecting a memory manager", below. +You probably don't need to worry about this on reasonably-sized Unix machines, +unless you plan to process very large images. + +Configure has some other features that are useful if you are cross-compiling +or working in a network of multiple machine types; but if you need those +features, you probably already know how to use them. + + +Configuring the software using one of the supplied jconfig and makefile files +----------------------------------------------------------------------------- + +If you have one of these systems, you can just use the provided configuration +files: + +Makefile jconfig file System and/or compiler + +makefile.manx jconfig.manx Amiga, Manx Aztec C +makefile.sas jconfig.sas Amiga, SAS C +makeproj.mac jconfig.mac Apple Macintosh, Metrowerks CodeWarrior +mak*jpeg.st jconfig.st Atari ST/STE/TT, Pure C or Turbo C +makefile.bcc jconfig.bcc MS-DOS or OS/2, Borland C +makefile.dj jconfig.dj MS-DOS, DJGPP (Delorie's port of GNU C) +makefile.mc6 jconfig.mc6 MS-DOS, Microsoft C (16-bit only) +makefile.wat jconfig.wat MS-DOS, OS/2, or Windows NT, Watcom C +makefile.vc jconfig.vc Windows NT/9x, MS Visual C++ +make*.vc6 jconfig.vc Windows NT/9x, MS Visual C++ 6 +make*.v10 jconfig.vc Windows NT/9x, MS Visual C++ 2010 (v10) +makefile.b32 jconfig.vc Windows NT/9x, Borland C++ 32-bit (bcc32) +makefile.mms jconfig.vms Digital VMS, with MMS software +makefile.vms jconfig.vms Digital VMS, without MMS software + +Copy the proper jconfig file to jconfig.h and the makefile to Makefile (or +whatever your system uses as the standard makefile name). For more info see +the appropriate system-specific hints section near the end of this file. + + +Configuring the software by hand +-------------------------------- + +First, generate a jconfig.h file. If you are moderately familiar with C, +the comments in jconfig.txt should be enough information to do this; just +copy jconfig.txt to jconfig.h and edit it appropriately. Otherwise, you may +prefer to use the ckconfig.c program. You will need to compile and execute +ckconfig.c by hand --- we hope you know at least enough to do that. +ckconfig.c may not compile the first try (in fact, the whole idea is for it +to fail if anything is going to). If you get compile errors, fix them by +editing ckconfig.c according to the directions given in ckconfig.c. Once +you get it to run, it will write a suitable jconfig.h file, and will also +print out some advice about which makefile to use. + +You may also want to look at the canned jconfig files, if there is one for a +system similar to yours. + +Second, select a makefile and copy it to Makefile (or whatever your system +uses as the standard makefile name). The most generic makefiles we provide +are + makefile.ansi: if your C compiler supports function prototypes + makefile.unix: if not. +(You have function prototypes if ckconfig.c put "#define HAVE_PROTOTYPES" +in jconfig.h.) You may want to start from one of the other makefiles if +there is one for a system similar to yours. + +Look over the selected Makefile and adjust options as needed. In particular +you may want to change the CC and CFLAGS definitions. For instance, if you +are using GCC, set CC=gcc. If you had to use any compiler switches to get +ckconfig.c to work, make sure the same switches are in CFLAGS. + +If you are on a system that doesn't use makefiles, you'll need to set up +project files (or whatever you do use) to compile all the source files and +link them into executable files cjpeg, djpeg, jpegtran, rdjpgcom, and wrjpgcom. +See the file lists in any of the makefiles to find out which files go into +each program. Note that the provided makefiles all make a "library" file +libjpeg first, but you don't have to do that if you don't want to; the file +lists identify which source files are actually needed for compression, +decompression, or both. As a last resort, you can make a batch script that +just compiles everything and links it all together; makefile.vms is an example +of this (it's for VMS systems that have no make-like utility). + +Here are comments about some specific configuration decisions you'll +need to make: + +Command line style +------------------ + +These programs can use a Unix-like command line style which supports +redirection and piping, like this: + cjpeg inputfile >outputfile + cjpeg outputfile + source program | cjpeg >outputfile +The simpler "two file" command line style is just + cjpeg inputfile outputfile +You may prefer the two-file style, particularly if you don't have pipes. + +You MUST use two-file style on any system that doesn't cope well with binary +data fed through stdin/stdout; this is true for some MS-DOS compilers, for +example. If you're not on a Unix system, it's safest to assume you need +two-file style. (But if your compiler provides either the Posix-standard +fdopen() library routine or a Microsoft-compatible setmode() routine, you +can safely use the Unix command line style, by defining USE_FDOPEN or +USE_SETMODE respectively.) + +To use the two-file style, make jconfig.h say "#define TWO_FILE_COMMANDLINE". + +Selecting a memory manager +-------------------------- + +The IJG code is capable of working on images that are too big to fit in main +memory; data is swapped out to temporary files as necessary. However, the +code to do this is rather system-dependent. We provide five different +memory managers: + +* jmemansi.c This version uses the ANSI-standard library routine tmpfile(), + which not all non-ANSI systems have. On some systems + tmpfile() may put the temporary file in a non-optimal + location; if you don't like what it does, use jmemname.c. + +* jmemname.c This version creates named temporary files. For anything + except a Unix machine, you'll need to configure the + select_file_name() routine appropriately; see the comments + near the head of jmemname.c. If you use this version, define + NEED_SIGNAL_CATCHER in jconfig.h to make sure the temp files + are removed if the program is aborted. + +* jmemnobs.c (That stands for No Backing Store :-).) This will compile on + almost any system, but it assumes you have enough main memory + or virtual memory to hold the biggest images you work with. + +* jmemdos.c This should be used with most 16-bit MS-DOS compilers. + See the system-specific notes about MS-DOS for more info. + IMPORTANT: if you use this, define USE_MSDOS_MEMMGR in + jconfig.h, and include the assembly file jmemdosa.asm in the + programs. The supplied makefiles and jconfig files for + 16-bit MS-DOS compilers already do both. + +* jmemmac.c Custom version for Apple Macintosh; see the system-specific + notes for Macintosh for more info. + +To use a particular memory manager, change the SYSDEPMEM variable in your +makefile to equal the corresponding object file name (for example, jmemansi.o +or jmemansi.obj for jmemansi.c). + +If you have plenty of (real or virtual) main memory, just use jmemnobs.c. +"Plenty" means about ten bytes for every pixel in the largest images +you plan to process, so a lot of systems don't meet this criterion. +If yours doesn't, try jmemansi.c first. If that doesn't compile, you'll have +to use jmemname.c; be sure to adjust select_file_name() for local conditions. +You may also need to change unlink() to remove() in close_backing_store(). + +Except with jmemnobs.c or jmemmac.c, you need to adjust the DEFAULT_MAX_MEM +setting to a reasonable value for your system (either by adding a #define for +DEFAULT_MAX_MEM to jconfig.h, or by adding a -D switch to the Makefile). +This value limits the amount of data space the program will attempt to +allocate. Code and static data space isn't counted, so the actual memory +needs for cjpeg or djpeg are typically 100 to 150Kb more than the max-memory +setting. Larger max-memory settings reduce the amount of I/O needed to +process a large image, but too large a value can result in "insufficient +memory" failures. On most Unix machines (and other systems with virtual +memory), just set DEFAULT_MAX_MEM to several million and forget it. At the +other end of the spectrum, for MS-DOS machines you probably can't go much +above 300K to 400K. (On MS-DOS the value refers to conventional memory only. +Extended/expanded memory is handled separately by jmemdos.c.) + + +BUILDING THE SOFTWARE +===================== + +Now you should be able to compile the software. Just say "make" (or +whatever's necessary to start the compilation). Have a cup of coffee. + +Here are some things that could go wrong: + +If your compiler complains about undefined structures, you should be able to +shut it up by putting "#define INCOMPLETE_TYPES_BROKEN" in jconfig.h. + +If you have trouble with missing system include files or inclusion of the +wrong ones, read jinclude.h. This shouldn't happen if you used configure +or ckconfig.c to set up jconfig.h. + +There are a fair number of routines that do not use all of their parameters; +some compilers will issue warnings about this, which you can ignore. There +are also a few configuration checks that may give "unreachable code" warnings. +Any other warning deserves investigation. + +If you don't have a getenv() library routine, define NO_GETENV. + +Also see the system-specific hints, below. + + +TESTING THE SOFTWARE +==================== + +As a quick test of functionality we've included a small sample image in +several forms: + testorig.jpg Starting point for the djpeg tests. + testimg.ppm The output of djpeg testorig.jpg + testimg.bmp The output of djpeg -bmp -colors 256 testorig.jpg + testimg.jpg The output of cjpeg testimg.ppm + testprog.jpg Progressive-mode equivalent of testorig.jpg. + testimgp.jpg The output of cjpeg -progressive -optimize testimg.ppm +(The first- and second-generation .jpg files aren't identical since the +default compression parameters are lossy.) If you can generate duplicates +of the testimg* files then you probably have working programs. + +With most of the makefiles, "make test" will perform the necessary +comparisons. + +If you're using a makefile that doesn't provide the test option, run djpeg +and cjpeg by hand and compare the output files to testimg* with whatever +binary file comparison tool you have. The files should be bit-for-bit +identical. + +If the programs complain "MAX_ALLOC_CHUNK is wrong, please fix", then you +need to reduce MAX_ALLOC_CHUNK to a value that fits in type size_t. +Try adding "#define MAX_ALLOC_CHUNK 65520L" to jconfig.h. A less likely +configuration error is "ALIGN_TYPE is wrong, please fix": defining ALIGN_TYPE +as long should take care of that one. + +If the cjpeg test run fails with "Missing Huffman code table entry", it's a +good bet that you needed to define RIGHT_SHIFT_IS_UNSIGNED. Go back to the +configuration step and run ckconfig.c. (This is a good plan for any other +test failure, too.) + +If you are using Unix (one-file) command line style on a non-Unix system, +it's a good idea to check that binary I/O through stdin/stdout actually +works. You should get the same results from "djpeg out.ppm" +as from "djpeg -outfile out.ppm testorig.jpg". Note that the makefiles all +use the latter style and therefore do not exercise stdin/stdout! If this +check fails, try recompiling with USE_SETMODE or USE_FDOPEN defined. +If it still doesn't work, better use two-file style. + +If you chose a memory manager other than jmemnobs.c, you should test that +temporary-file usage works. Try "djpeg -bmp -colors 256 -max 0 testorig.jpg" +and make sure its output matches testimg.bmp. If you have any really large +images handy, try compressing them with -optimize and/or decompressing with +-colors 256 to make sure your DEFAULT_MAX_MEM setting is not too large. + +NOTE: this is far from an exhaustive test of the JPEG software; some modules, +such as 1-pass color quantization, are not exercised at all. It's just a +quick test to give you some confidence that you haven't missed something +major. + + +INSTALLING THE SOFTWARE +======================= + +Once you're done with the above steps, you can install the software by +copying the executable files (cjpeg, djpeg, jpegtran, rdjpgcom, and wrjpgcom) +to wherever you normally install programs. On Unix systems, you'll also want +to put the man pages (cjpeg.1, djpeg.1, jpegtran.1, rdjpgcom.1, wrjpgcom.1) +in the man-page directory. The pre-fab makefiles don't support this step +since there's such a wide variety of installation procedures on different +systems. + +If you generated a Makefile with the "configure" script, you can just say + make install +to install the programs and their man pages into the standard places. +(You'll probably need to be root to do this.) We recommend first saying + make -n install +to see where configure thought the files should go. You may need to edit +the Makefile, particularly if your system's conventions for man page +filenames don't match what configure expects. + +If you want to install the IJG library itself, for use in compiling other +programs besides ours, then you need to put the four include files + jpeglib.h jerror.h jconfig.h jmorecfg.h +into your include-file directory, and put the library file libjpeg.a +(extension may vary depending on system) wherever library files go. +If you generated a Makefile with "configure", it will do what it thinks +is the right thing if you say + make install-lib + + +OPTIONAL STUFF +============== + +Progress monitor: + +If you like, you can #define PROGRESS_REPORT (in jconfig.h) to enable display +of percent-done progress reports. The routine provided in cdjpeg.c merely +prints percentages to stderr, but you can customize it to do something +fancier. + +Utah RLE file format support: + +We distribute the software with support for RLE image files (Utah Raster +Toolkit format) disabled, because the RLE support won't compile without the +Utah library. If you have URT version 3.1 or later, you can enable RLE +support as follows: + 1. #define RLE_SUPPORTED in jconfig.h. + 2. Add a -I option to CFLAGS in the Makefile for the directory + containing the URT .h files (typically the "include" + subdirectory of the URT distribution). + 3. Add -L... -lrle to LDLIBS in the Makefile, where ... specifies + the directory containing the URT "librle.a" file (typically the + "lib" subdirectory of the URT distribution). + +Support for 9-bit to 12-bit deep pixel data: + +The IJG code currently allows 8, 9, 10, 11, or 12 bits sample data precision. +(For color, this means 8 to 12 bits per channel, of course.) If you need to +work with deeper than 8-bit data, you can compile the IJG code for 9-bit to +12-bit operation. +To do so: + 1. In jmorecfg.h, define BITS_IN_JSAMPLE as 9, 10, 11, or 12 rather than 8. + 2. In jconfig.h, undefine BMP_SUPPORTED, RLE_SUPPORTED, and TARGA_SUPPORTED, + because the code for those formats doesn't handle deeper than 8-bit data + and won't even compile. (The PPM code does work, as explained below. + The GIF code works too; it scales 8-bit GIF data to and from 12-bit + depth automatically.) + 3. Compile. Don't expect "make test" to pass, since the supplied test + files are for 8-bit data. + +Currently, 9-bit to 12-bit support does not work on 16-bit-int machines. + +Run-time selection and conversion of data precision are currently not +supported and may be added later. +Exception: The transcoding part (jpegtran) supports all settings in a +single instance, since it operates on the level of DCT coefficients and +not sample values. + +The PPM reader (rdppm.c) can read deeper than 8-bit data from either +text-format or binary-format PPM and PGM files. Binary-format PPM/PGM files +which have a maxval greater than 255 are assumed to use 2 bytes per sample, +MSB first (big-endian order). As of early 1995, 2-byte binary format is not +officially supported by the PBMPLUS library, but it is expected that a +future release of PBMPLUS will support it. Note that the PPM reader will +read files of any maxval regardless of the BITS_IN_JSAMPLE setting; incoming +data is automatically rescaled to maxval=MAXJSAMPLE as appropriate for the +cjpeg bit depth. + +The PPM writer (wrppm.c) will normally write 2-byte binary PPM or PGM +format, maxval=MAXJSAMPLE, when compiled with BITS_IN_JSAMPLE>8. Since this +format is not yet widely supported, you can disable it by compiling wrppm.c +with PPM_NORAWWORD defined; then the data is scaled down to 8 bits to make a +standard 1-byte/sample PPM or PGM file. (Yes, this means still another copy +of djpeg to keep around. But hopefully you won't need it for very long. +Poskanzer's supposed to get that new PBMPLUS release out Real Soon Now.) + +Of course, if you are working with 9-bit to 12-bit data, you probably have +it stored in some other, nonstandard format. In that case you'll probably +want to write your own I/O modules to read and write your format. + +Note: +The standard Huffman tables are only valid for 8-bit data precision. If +you selected more than 8-bit data precision, cjpeg uses arithmetic coding +by default. The Huffman encoder normally uses entropy optimization to +compute usable tables for higher precision. Otherwise, you'll have to +supply different default Huffman tables. + +Removing code: + +If you need to make a smaller version of the JPEG software, some optional +functions can be removed at compile time. See the xxx_SUPPORTED #defines in +jconfig.h and jmorecfg.h. If at all possible, we recommend that you leave in +decoder support for all valid JPEG files, to ensure that you can read anyone's +output. Taking out support for image file formats that you don't use is the +most painless way to make the programs smaller. Another possibility is to +remove some of the DCT methods: in particular, the "IFAST" method may not be +enough faster than the others to be worth keeping on your machine. (If you +do remove ISLOW or IFAST, be sure to redefine JDCT_DEFAULT or JDCT_FASTEST +to a supported method, by adding a #define in jconfig.h.) + + +OPTIMIZATION +============ + +Unless you own a Cray, you'll probably be interested in making the JPEG +software go as fast as possible. This section covers some machine-dependent +optimizations you may want to try. We suggest that before trying any of +this, you first get the basic installation to pass the self-test step. +Repeat the self-test after any optimization to make sure that you haven't +broken anything. + +The integer DCT routines perform a lot of multiplications. These +multiplications must yield 32-bit results, but none of their input values +are more than 16 bits wide. On many machines, notably the 680x0 and 80x86 +CPUs, a 16x16=>32 bit multiply instruction is faster than a full 32x32=>32 +bit multiply. Unfortunately there is no portable way to specify such a +multiplication in C, but some compilers can generate one when you use the +right combination of casts. See the MULTIPLYxxx macro definitions in +jdct.h. If your compiler makes "int" be 32 bits and "short" be 16 bits, +defining SHORTxSHORT_32 is fairly likely to work. When experimenting with +alternate definitions, be sure to test not only whether the code still works +(use the self-test), but also whether it is actually faster --- on some +compilers, alternate definitions may compute the right answer, yet be slower +than the default. Timing cjpeg on a large PGM (grayscale) input file is the +best way to check this, as the DCT will be the largest fraction of the runtime +in that mode. (Note: some of the distributed compiler-specific jconfig files +already contain #define switches to select appropriate MULTIPLYxxx +definitions.) + +If your machine has sufficiently fast floating point hardware, you may find +that the float DCT method is faster than the integer DCT methods, even +after tweaking the integer multiply macros. In that case you may want to +make the float DCT be the default method. (The only objection to this is +that float DCT results may vary slightly across machines.) To do that, add +"#define JDCT_DEFAULT JDCT_FLOAT" to jconfig.h. Even if you don't change +the default, you should redefine JDCT_FASTEST, which is the method selected +by djpeg's -fast switch. Don't forget to update the documentation files +(usage.txt and/or cjpeg.1, djpeg.1) to agree with what you've done. + +If access to "short" arrays is slow on your machine, it may be a win to +define type JCOEF as int rather than short. This will cost a good deal of +memory though, particularly in some multi-pass modes, so don't do it unless +you have memory to burn and short is REALLY slow. + +If your compiler can compile function calls in-line, make sure the INLINE +macro in jmorecfg.h is defined as the keyword that marks a function +inline-able. Some compilers have a switch that tells the compiler to inline +any function it thinks is profitable (e.g., -finline-functions for gcc). +Enabling such a switch is likely to make the compiled code bigger but faster. + +In general, it's worth trying the maximum optimization level of your compiler, +and experimenting with any optional optimizations such as loop unrolling. +(Unfortunately, far too many compilers have optimizer bugs ... be prepared to +back off if the code fails self-test.) If you do any experimentation along +these lines, please report the optimal settings to jpeg-info@jpegclub.org so +we can mention them in future releases. Be sure to specify your machine and +compiler version. + + +HINTS FOR SPECIFIC SYSTEMS +========================== + +We welcome reports on changes needed for systems not mentioned here. Submit +'em to jpeg-info@jpegclub.org. Also, if configure or ckconfig.c is wrong +about how to configure the JPEG software for your system, please let us know. + + +Acorn RISC OS: + +(Thanks to Simon Middleton for these hints on compiling with Desktop C.) +After renaming the files according to Acorn conventions, take a copy of +makefile.ansi, change all occurrences of 'libjpeg.a' to 'libjpeg.o' and +change these definitions as indicated: + +CFLAGS= -throwback -IC: -Wn +LDLIBS=C:o.Stubs +SYSDEPMEM=jmemansi.o +LN=Link +AR=LibFile -c -o + +Also add a new line '.c.o:; $(cc) $< $(cflags) -c -o $@'. Remove the +lines '$(RM) libjpeg.o' and '$(AR2) libjpeg.o' and the 'jconfig.h' +dependency section. + +Copy jconfig.txt to jconfig.h. Edit jconfig.h to define TWO_FILE_COMMANDLINE +and CHAR_IS_UNSIGNED. + +Run the makefile using !AMU not !Make. If you want to use the 'clean' and +'test' makefile entries then you will have to fiddle with the syntax a bit +and rename the test files. + + +Amiga: + +SAS C 6.50 reportedly is too buggy to compile the IJG code properly. +A patch to update to 6.51 is available from SAS or AmiNet FTP sites. + +The supplied config files are set up to use jmemname.c as the memory +manager, with temporary files being created on the device named by +"JPEGTMP:". + + +Atari ST/STE/TT: + +Copy the project files makcjpeg.st, makdjpeg.st, maktjpeg.st, and makljpeg.st +to cjpeg.prj, djpeg.prj, jpegtran.prj, and libjpeg.prj respectively. The +project files should work as-is with Pure C. For Turbo C, change library +filenames "pc..." to "tc..." in each project file. Note that libjpeg.prj +selects jmemansi.c as the recommended memory manager. You'll probably want to +adjust the DEFAULT_MAX_MEM setting --- you want it to be a couple hundred K +less than your normal free memory. Put "#define DEFAULT_MAX_MEM nnnn" into +jconfig.h to do this. + +To use the 68881/68882 coprocessor for the floating point DCT, add the +compiler option "-8" to the project files and replace pcfltlib.lib with +pc881lib.lib in cjpeg.prj and djpeg.prj. Or if you don't have a +coprocessor, you may prefer to remove the float DCT code by undefining +DCT_FLOAT_SUPPORTED in jmorecfg.h (since without a coprocessor, the float +code will be too slow to be useful). In that case, you can delete +pcfltlib.lib from the project files. + +Note that you must make libjpeg.lib before making cjpeg.ttp, djpeg.ttp, +or jpegtran.ttp. You'll have to perform the self-test by hand. + +We haven't bothered to include project files for rdjpgcom and wrjpgcom. +Those source files should just be compiled by themselves; they don't +depend on the JPEG library. You can use the default.prj project file +of the Pure C distribution to make the programs. + +There is a bug in some older versions of the Turbo C library which causes the +space used by temporary files created with "tmpfile()" not to be freed after +an abnormal program exit. If you check your disk afterwards, you will find +cluster chains that are allocated but not used by a file. This should not +happen in cjpeg/djpeg/jpegtran, since we enable a signal catcher to explicitly +close temp files before exiting. But if you use the JPEG library with your +own code, be sure to supply a signal catcher, or else use a different +system-dependent memory manager. + + +Cray: + +Should you be so fortunate as to be running JPEG on a Cray YMP, there is a +compiler bug in old versions of Cray's Standard C (prior to 3.1). If you +still have an old compiler, you'll need to insert a line reading +"#pragma novector" just before the loop + for (i = 1; i <= (int) htbl->bits[l]; i++) + huffsize[p++] = (char) l; +in fix_huff_tbl (in V5beta1, line 204 of jchuff.c and line 176 of jdhuff.c). +[This bug may or may not still occur with the current IJG code, but it's +probably a dead issue anyway...] + + +HP-UX: + +If you have HP-UX 7.05 or later with the "software development" C compiler, +you should run the compiler in ANSI mode. If using the configure script, +say + ./configure CC='cc -Aa' +(or -Ae if you prefer). If configuring by hand, use makefile.ansi and add +"-Aa" to the CFLAGS line in the makefile. + +If you have a pre-7.05 system, or if you are using the non-ANSI C compiler +delivered with a minimum HP-UX system, then you must use makefile.unix +(and do NOT add -Aa); or just run configure without the CC option. + +On HP 9000 series 800 machines, the HP C compiler is buggy in revisions prior +to A.08.07. If you get complaints about "not a typedef name", you'll have to +use makefile.unix, or run configure without the CC option. + + +Macintosh, generic comments: + +The supplied user-interface files (cjpeg.c, djpeg.c, etc) are set up to +provide a Unix-style command line interface. You can use this interface on +the Mac by means of the ccommand() library routine provided by Metrowerks +CodeWarrior or Think C. This is only appropriate for testing the library, +however; to make a user-friendly equivalent of cjpeg/djpeg you'd really want +to develop a Mac-style user interface. There isn't a complete example +available at the moment, but there are some helpful starting points: +1. Sam Bushell's free "To JPEG" applet provides drag-and-drop conversion to +JPEG under System 7 and later. This only illustrates how to use the +compression half of the library, but it does a very nice job of that part. +The CodeWarrior source code is available from http://www.pobox.com/~jsam. +2. Jim Brunner prepared a Mac-style user interface for both compression and +decompression. Unfortunately, it hasn't been updated since IJG v4, and +the library's API has changed considerably since then. Still it may be of +some help, particularly as a guide to compiling the IJG code under Think C. +Jim's code is available from the Info-Mac archives, at sumex-aim.stanford.edu +or mirrors thereof; see file /info-mac/dev/src/jpeg-convert-c.hqx. + +jmemmac.c is the recommended memory manager back end for Macintosh. It uses +NewPtr/DisposePtr instead of malloc/free, and has a Mac-specific +implementation of jpeg_mem_available(). It also creates temporary files that +follow Mac conventions. (That part of the code relies on System-7-or-later OS +functions. See the comments in jmemmac.c if you need to run it on System 6.) +NOTE that USE_MAC_MEMMGR must be defined in jconfig.h to use jmemmac.c. + +You can also use jmemnobs.c, if you don't care about handling images larger +than available memory. If you use any memory manager back end other than +jmemmac.c, we recommend replacing "malloc" and "free" by "NewPtr" and +"DisposePtr", because Mac C libraries often have peculiar implementations of +malloc/free. (For instance, free() may not return the freed space to the +Mac Memory Manager. This is undesirable for the IJG code because jmemmgr.c +already clumps space requests.) + + +Macintosh, Metrowerks CodeWarrior: + +The Unix-command-line-style interface can be used by defining USE_CCOMMAND. +You'll also need to define TWO_FILE_COMMANDLINE to avoid stdin/stdout. +This means that when using the cjpeg/djpeg programs, you'll have to type the +input and output file names in the "Arguments" text-edit box, rather than +using the file radio buttons. (Perhaps USE_FDOPEN or USE_SETMODE would +eliminate the problem, but I haven't heard from anyone who's tried it.) + +On 680x0 Macs, Metrowerks defines type "double" as a 10-byte IEEE extended +float. jmemmgr.c won't like this: it wants sizeof(ALIGN_TYPE) to be a power +of 2. Add "#define ALIGN_TYPE long" to jconfig.h to eliminate the complaint. + +The supplied configuration file jconfig.mac can be used for your jconfig.h; +it includes all the recommended symbol definitions. If you have AppleScript +installed, you can run the supplied script makeproj.mac to create CodeWarrior +project files for the library and the testbed applications, then build the +library and applications. (Thanks to Dan Sears and Don Agro for this nifty +hack, which saves us from trying to maintain CodeWarrior project files as part +of the IJG distribution...) + + +Macintosh, Think C: + +The documentation in Jim Brunner's "JPEG Convert" source code (see above) +includes detailed build instructions for Think C; it's probably somewhat +out of date for the current release, but may be helpful. + +If you want to build the minimal command line version, proceed as follows. +You'll have to prepare project files for the programs; we don't include any +in the distribution since they are not text files. Use the file lists in +any of the supplied makefiles as a guide. Also add the ANSI and Unix C +libraries in a separate segment. You may need to divide the JPEG files into +more than one segment; we recommend dividing compression and decompression +modules. Define USE_CCOMMAND in jconfig.h so that the ccommand() routine is +called. You must also define TWO_FILE_COMMANDLINE because stdin/stdout +don't handle binary data correctly. + +On 680x0 Macs, Think C defines type "double" as a 12-byte IEEE extended float. +jmemmgr.c won't like this: it wants sizeof(ALIGN_TYPE) to be a power of 2. +Add "#define ALIGN_TYPE long" to jconfig.h to eliminate the complaint. + +jconfig.mac should work as a jconfig.h configuration file for Think C, +but the makeproj.mac AppleScript script is specific to CodeWarrior. Sorry. + + +MIPS R3000: + +MIPS's cc version 1.31 has a rather nasty optimization bug. Don't use -O +if you have that compiler version. (Use "cc -V" to check the version.) +Note that the R3000 chip is found in workstations from DEC and others. + + +MS-DOS, generic comments for 16-bit compilers: + +The IJG code is designed to work well in 80x86 "small" or "medium" memory +models (i.e., data pointers are 16 bits unless explicitly declared "far"; +code pointers can be either size). You may be able to use small model to +compile cjpeg or djpeg by itself, but you will probably have to use medium +model for any larger application. This won't make much difference in +performance. You *will* take a noticeable performance hit if you use a +large-data memory model, and you should avoid "huge" model if at all +possible. Be sure that NEED_FAR_POINTERS is defined in jconfig.h if you use +a small-data memory model; be sure it is NOT defined if you use a large-data +model. (The supplied makefiles and jconfig files for Borland and Microsoft C +compile in medium model and define NEED_FAR_POINTERS.) + +The DOS-specific memory manager, jmemdos.c, should be used if possible. +It needs some assembly-code routines which are in jmemdosa.asm; make sure +your makefile assembles that file and includes it in the library. If you +don't have a suitable assembler, you can get pre-assembled object files for +jmemdosa by FTP from ftp.uu.net:/graphics/jpeg/jdosaobj.zip. (DOS-oriented +distributions of the IJG source code often include these object files.) + +When using jmemdos.c, jconfig.h must define USE_MSDOS_MEMMGR and must set +MAX_ALLOC_CHUNK to less than 64K (65520L is a typical value). If your +C library's far-heap malloc() can't allocate blocks that large, reduce +MAX_ALLOC_CHUNK to whatever it can handle. + +If you can't use jmemdos.c for some reason --- for example, because you +don't have an assembler to assemble jmemdosa.asm --- you'll have to fall +back to jmemansi.c or jmemname.c. You'll probably still need to set +MAX_ALLOC_CHUNK in jconfig.h, because most DOS C libraries won't malloc() +more than 64K at a time. IMPORTANT: if you use jmemansi.c or jmemname.c, +you will have to compile in a large-data memory model in order to get the +right stdio library. Too bad. + +wrjpgcom needs to be compiled in large model, because it malloc()s a 64KB +work area to hold the comment text. If your C library's malloc can't +handle that, reduce MAX_COM_LENGTH as necessary in wrjpgcom.c. + +Most MS-DOS compilers treat stdin/stdout as text files, so you must use +two-file command line style. But if your compiler has either fdopen() or +setmode(), you can use one-file style if you like. To do this, define +USE_SETMODE or USE_FDOPEN so that stdin/stdout will be set to binary mode. +(USE_SETMODE seems to work with more DOS compilers than USE_FDOPEN.) You +should test that I/O through stdin/stdout produces the same results as I/O +to explicitly named files... the "make test" procedures in the supplied +makefiles do NOT use stdin/stdout. + + +MS-DOS, generic comments for 32-bit compilers: + +None of the above comments about memory models apply if you are using a +32-bit flat-memory-space environment, such as DJGPP or Watcom C. (And you +should use one if you have it, as performance will be much better than +8086-compatible code!) For flat-memory-space compilers, do NOT define +NEED_FAR_POINTERS, and do NOT use jmemdos.c. Use jmemnobs.c if the +environment supplies adequate virtual memory, otherwise use jmemansi.c or +jmemname.c. + +You'll still need to be careful about binary I/O through stdin/stdout. +See the last paragraph of the previous section. + + +MS-DOS, Borland C: + +Be sure to convert all the source files to DOS text format (CR/LF newlines). +Although Borland C will often work OK with unmodified Unix (LF newlines) +source files, sometimes it will give bogus compile errors. +"Illegal character '#'" is the most common such error. (This is true with +Borland C 3.1, but perhaps is fixed in newer releases.) + +If you want one-file command line style, just undefine TWO_FILE_COMMANDLINE. +jconfig.bcc already includes #define USE_SETMODE to make this work. +(fdopen does not work correctly.) + + +MS-DOS, Microsoft C: + +makefile.mc6 works with Microsoft C, DOS Visual C++, etc. It should only +be used if you want to build a 16-bit (small or medium memory model) program. + +If you want one-file command line style, just undefine TWO_FILE_COMMANDLINE. +jconfig.mc6 already includes #define USE_SETMODE to make this work. +(fdopen does not work correctly.) + +Note that this makefile assumes that the working copy of itself is called +"makefile". If you want to call it something else, say "makefile.mak", +be sure to adjust the dependency line that reads "$(RFILE) : makefile". +Otherwise the make will fail because it doesn't know how to create "makefile". +Worse, some releases of Microsoft's make utilities give an incorrect error +message in this situation. + +Old versions of MS C fail with an "out of macro expansion space" error +because they can't cope with the macro TRACEMS8 (defined in jerror.h). +If this happens to you, the easiest solution is to change TRACEMS8 to +expand to nothing. You'll lose the ability to dump out JPEG coefficient +tables with djpeg -debug -debug, but at least you can compile. + +Original MS C 6.0 is very buggy; it compiles incorrect code unless you turn +off optimization entirely (remove -O from CFLAGS). 6.00A is better, but it +still generates bad code if you enable loop optimizations (-Ol or -Ox). + +MS C 8.0 crashes when compiling jquant1.c with optimization switch /Oo ... +which is on by default. To work around this bug, compile that one file +with /Oo-. + + +Microsoft Windows (all versions), generic comments: + +Some Windows system include files define typedef boolean as "unsigned char". +The IJG code also defines typedef boolean, but we make it an "enum" by default. +This doesn't affect the IJG programs because we don't import those Windows +include files. But if you use the JPEG library in your own program, and some +of your program's files import one definition of boolean while some import the +other, you can get all sorts of mysterious problems. A good preventive step +is to make the IJG library use "unsigned char" for boolean. To do that, +add something like this to your jconfig.h file: + /* Define "boolean" as unsigned char, not enum, per Windows custom */ + #ifndef __RPCNDR_H__ /* don't conflict if rpcndr.h already read */ + typedef unsigned char boolean; + #endif + #ifndef FALSE /* in case these macros already exist */ + #define FALSE 0 /* values of boolean */ + #endif + #ifndef TRUE + #define TRUE 1 + #endif + #define HAVE_BOOLEAN /* prevent jmorecfg.h from redefining it */ +(This is already in jconfig.vc, by the way.) + +windef.h contains the declarations + #define far + #define FAR far +Since jmorecfg.h tries to define FAR as empty, you may get a compiler +warning if you include both jpeglib.h and windef.h (which windows.h +includes). To suppress the warning, you can put "#ifndef FAR"/"#endif" +around the line "#define FAR" in jmorecfg.h. +(Something like this is already in jmorecfg.h, by the way.) + +When using the library in a Windows application, you will almost certainly +want to modify or replace the error handler module jerror.c, since our +default error handler does a couple of inappropriate things: + 1. it tries to write error and warning messages on stderr; + 2. in event of a fatal error, it exits by calling exit(). + +A simple stopgap solution for problem 1 is to replace the line + fprintf(stderr, "%s\n", buffer); +(in output_message in jerror.c) with + MessageBox(GetActiveWindow(),buffer,"JPEG Error",MB_OK|MB_ICONERROR); +It's highly recommended that you at least do that much, since otherwise +error messages will disappear into nowhere. (Beginning with IJG v6b, this +code is already present in jerror.c; just define USE_WINDOWS_MESSAGEBOX in +jconfig.h to enable it.) + +The proper solution for problem 2 is to return control to your calling +application after a library error. This can be done with the setjmp/longjmp +technique discussed in libjpeg.txt and illustrated in example.c. (NOTE: +some older Windows C compilers provide versions of setjmp/longjmp that +don't actually work under Windows. You may need to use the Windows system +functions Catch and Throw instead.) + +The recommended memory manager under Windows is jmemnobs.c; in other words, +let Windows do any virtual memory management needed. You should NOT use +jmemdos.c nor jmemdosa.asm under Windows. + +For Windows 3.1, we recommend compiling in medium or large memory model; +for newer Windows versions, use a 32-bit flat memory model. (See the MS-DOS +sections above for more info about memory models.) In the 16-bit memory +models only, you'll need to put + #define MAX_ALLOC_CHUNK 65520L /* Maximum request to malloc() */ +into jconfig.h to limit allocation chunks to 64Kb. (Without that, you'd +have to use huge memory model, which slows things down unnecessarily.) +jmemnobs.c works without modification in large or flat memory models, but to +use medium model, you need to modify its jpeg_get_large and jpeg_free_large +routines to allocate far memory. In any case, you might like to replace +its calls to malloc and free with direct calls on Windows memory allocation +functions. + +You may also want to modify jdatasrc.c and jdatadst.c to use Windows file +operations rather than fread/fwrite. This is only necessary if your C +compiler doesn't provide a competent implementation of C stdio functions. + +You might want to tweak the RGB_xxx macros in jmorecfg.h so that the library +will accept or deliver color pixels in BGR sample order, not RGB; BGR order +is usually more convenient under Windows. Note that this change will break +the sample applications cjpeg/djpeg, but the library itself works fine. + + +Many people want to convert the IJG library into a DLL. This is reasonably +straightforward, but watch out for the following: + + 1. Don't try to compile as a DLL in small or medium memory model; use +large model, or even better, 32-bit flat model. Many places in the IJG code +assume the address of a local variable is an ordinary (not FAR) pointer; +that isn't true in a medium-model DLL. + + 2. Microsoft C cannot pass file pointers between applications and DLLs. +(See Microsoft Knowledge Base, PSS ID Number Q50336.) So jdatasrc.c and +jdatadst.c don't work if you open a file in your application and then pass +the pointer to the DLL. One workaround is to make jdatasrc.c/jdatadst.c +part of your main application rather than part of the DLL. + + 3. You'll probably need to modify the macros GLOBAL() and EXTERN() to +attach suitable linkage keywords to the exported routine names. Similarly, +you'll want to modify METHODDEF() and JMETHOD() to ensure function pointers +are declared in a way that lets application routines be called back through +the function pointers. These macros are in jmorecfg.h. Typical definitions +for a 16-bit DLL are: + #define GLOBAL(type) type _far _pascal _loadds _export + #define EXTERN(type) extern type _far _pascal _loadds + #define METHODDEF(type) static type _far _pascal + #define JMETHOD(type,methodname,arglist) \ + type (_far _pascal *methodname) arglist +For a 32-bit DLL you may want something like + #define GLOBAL(type) __declspec(dllexport) type + #define EXTERN(type) extern __declspec(dllexport) type +Although not all the GLOBAL routines are actually intended to be called by +the application, the performance cost of making them all DLL entry points is +negligible. + +The unmodified IJG library presents a very C-specific application interface, +so the resulting DLL is only usable from C or C++ applications. There has +been some talk of writing wrapper code that would present a simpler interface +usable from other languages, such as Visual Basic. This is on our to-do list +but hasn't been very high priority --- any volunteers out there? + + +Microsoft Windows, Borland C: + +The provided jconfig.bcc should work OK in a 32-bit Windows environment, +but you'll need to tweak it in a 16-bit environment (you'd need to define +NEED_FAR_POINTERS and MAX_ALLOC_CHUNK). Beware that makefile.bcc will need +alteration if you want to use it for Windows --- in particular, you should +use jmemnobs.c not jmemdos.c under Windows. + +Borland C++ 4.5 fails with an internal compiler error when trying to compile +jdmerge.c in 32-bit mode. If enough people complain, perhaps Borland will fix +it. In the meantime, the simplest known workaround is to add a redundant +definition of the variable range_limit in h2v1_merged_upsample(), at the head +of the block that handles odd image width (about line 268 in v6 jdmerge.c): + /* If image width is odd, do the last output column separately */ + if (cinfo->output_width & 1) { + register JSAMPLE * range_limit = cinfo->sample_range_limit; /* ADD THIS */ + cb = GETJSAMPLE(*inptr1); +Pretty bizarre, especially since the very similar routine h2v2_merged_upsample +doesn't trigger the bug. +Recent reports suggest that this bug does not occur with "bcc32a" (the +Pentium-optimized version of the compiler). + +Another report from a user of Borland C 4.5 was that incorrect code (leading +to a color shift in processed images) was produced if any of the following +optimization switch combinations were used: + -Ot -Og + -Ot -Op + -Ot -Om +So try backing off on optimization if you see such a problem. (Are there +several different releases all numbered "4.5"??) + + +Microsoft Windows, Microsoft Visual C++: + +jconfig.vc should work OK with any Microsoft compiler for a 32-bit memory +model. makefile.vc is intended for command-line use. (If you are using +the Developer Studio environment, you may prefer the DevStudio project +files; see below.) + +IJG JPEG 7 adds extern "C" to jpeglib.h. This avoids the need to put +extern "C" { ... } around #include "jpeglib.h" in your C++ application. +You can also force VC++ to treat the library as C++ code by renaming +all the *.c files to *.cpp (and adjusting the makefile to match). +In this case you also need to define the symbol DONT_USE_EXTERN_C in +the configuration to prevent jpeglib.h from using extern "C". + + +Microsoft Windows, Microsoft Visual C++ 6 Developer Studio: + +We include makefiles that should work as project files in DevStudio 6.0 or +later. There is a library makefile that builds the IJG library as a static +Win32 library, and application makefiles that build the sample applications +as Win32 console applications. (Even if you only want the library, we +recommend building the applications so that you can run the self-test.) + +To use: +1. Open the command prompt, change to the main directory and execute the + command line + NMAKE /f makefile.vc setup-vc6 + This will move jconfig.vc to jconfig.h and makefiles to project files. + (Note that the renaming is critical!) +2. Open the workspace file jpeg.dsw, build the library project. + (If you are using DevStudio more recent than 6.0, you'll probably + get a message saying that the project files are being updated.) +3. Open the workspace file apps.dsw, build the application projects. +4. To perform the self-test, execute the command line + NMAKE /f makefile.vc test-build +5. Move the application .exe files from `app`\Release to an + appropriate location on your path. + + +Microsoft Windows, Microsoft Visual C++ 2010 Developer Studio (v10): + +We include makefiles that should work as project files in Visual Studio +2010 or later. There is a library makefile that builds the IJG library +as a static Win32 library, and application makefiles that build the sample +applications as Win32 console applications. (Even if you only want the +library, we recommend building the applications so that you can run the +self-test.) + +To use: +1. Open the command prompt, change to the main directory and execute the + command line + NMAKE /f makefile.vc setup-v10 + This will move jconfig.vc to jconfig.h and makefiles to project files. + (Note that the renaming is critical!) +2. Open the solution file jpeg.sln, build the library project. + (If you are using Visual Studio more recent than 2010 (v10), you'll + probably get a message saying that the project files are being updated.) +3. Open the solution file apps.sln, build the application projects. +4. To perform the self-test, execute the command line + NMAKE /f makefile.vc test-build +5. Move the application .exe files from `app`\Release to an + appropriate location on your path. + +Note: +There seems to be an optimization bug in the compiler which causes the +self-test to fail with the color quantization option. +We have disabled optimization for the file jquant2.c in the library +project file which causes the self-test to pass properly. + + +OS/2, Borland C++: + +Watch out for optimization bugs in older Borland compilers; you may need +to back off the optimization switch settings. See the comments in +makefile.bcc. + + +SGI: + +On some SGI systems, you may need to set "AR2= ar -ts" in the Makefile. +If you are using configure, you can do this by saying + ./configure RANLIB='ar -ts' +This change is not needed on all SGIs. Use it only if the make fails at the +stage of linking the completed programs. + +On the MIPS R4000 architecture (Indy, etc.), the compiler option "-mips2" +reportedly speeds up the float DCT method substantially, enough to make it +faster than the default int method (but still slower than the fast int +method). If you use -mips2, you may want to alter the default DCT method to +be float. To do this, put "#define JDCT_DEFAULT JDCT_FLOAT" in jconfig.h. + + +VMS: + +On an Alpha/VMS system with MMS, be sure to use the "/Marco=Alpha=1" +qualifier with MMS when building the JPEG package. + +VAX/VMS v5.5-1 may have problems with the test step of the build procedure +reporting differences when it compares the original and test images. If the +error points to the last block of the files, it is most likely bogus and may +be safely ignored. It seems to be because the files are Stream_LF and +Backup/Compare has difficulty with the (presumably) null padded files. +This problem was not observed on VAX/VMS v6.1 or AXP/VMS v6.1. diff --git a/compat/libjpeg/jaricom.c b/compat/libjpeg/jaricom.c new file mode 100755 index 0000000..6900688 --- /dev/null +++ b/compat/libjpeg/jaricom.c @@ -0,0 +1,153 @@ +/* + * jaricom.c + * + * Developed 1997-2011 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains probability estimation tables for common use in + * arithmetic entropy encoding and decoding routines. + * + * This data represents Table D.3 in the JPEG spec (D.2 in the draft), + * ISO/IEC IS 10918-1 and CCITT Recommendation ITU-T T.81, and Table 24 + * in the JBIG spec, ISO/IEC IS 11544 and CCITT Recommendation ITU-T T.82. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + +/* The following #define specifies the packing of the four components + * into the compact INT32 representation. + * Note that this formula must match the actual arithmetic encoder + * and decoder implementation. The implementation has to be changed + * if this formula is changed. + * The current organization is leaned on Markus Kuhn's JBIG + * implementation (jbig_tab.c). + */ + +#define V(i,a,b,c,d) (((INT32)a << 16) | ((INT32)c << 8) | ((INT32)d << 7) | b) + +const INT32 jpeg_aritab[113+1] = { +/* + * Index, Qe_Value, Next_Index_LPS, Next_Index_MPS, Switch_MPS + */ + V( 0, 0x5a1d, 1, 1, 1 ), + V( 1, 0x2586, 14, 2, 0 ), + V( 2, 0x1114, 16, 3, 0 ), + V( 3, 0x080b, 18, 4, 0 ), + V( 4, 0x03d8, 20, 5, 0 ), + V( 5, 0x01da, 23, 6, 0 ), + V( 6, 0x00e5, 25, 7, 0 ), + V( 7, 0x006f, 28, 8, 0 ), + V( 8, 0x0036, 30, 9, 0 ), + V( 9, 0x001a, 33, 10, 0 ), + V( 10, 0x000d, 35, 11, 0 ), + V( 11, 0x0006, 9, 12, 0 ), + V( 12, 0x0003, 10, 13, 0 ), + V( 13, 0x0001, 12, 13, 0 ), + V( 14, 0x5a7f, 15, 15, 1 ), + V( 15, 0x3f25, 36, 16, 0 ), + V( 16, 0x2cf2, 38, 17, 0 ), + V( 17, 0x207c, 39, 18, 0 ), + V( 18, 0x17b9, 40, 19, 0 ), + V( 19, 0x1182, 42, 20, 0 ), + V( 20, 0x0cef, 43, 21, 0 ), + V( 21, 0x09a1, 45, 22, 0 ), + V( 22, 0x072f, 46, 23, 0 ), + V( 23, 0x055c, 48, 24, 0 ), + V( 24, 0x0406, 49, 25, 0 ), + V( 25, 0x0303, 51, 26, 0 ), + V( 26, 0x0240, 52, 27, 0 ), + V( 27, 0x01b1, 54, 28, 0 ), + V( 28, 0x0144, 56, 29, 0 ), + V( 29, 0x00f5, 57, 30, 0 ), + V( 30, 0x00b7, 59, 31, 0 ), + V( 31, 0x008a, 60, 32, 0 ), + V( 32, 0x0068, 62, 33, 0 ), + V( 33, 0x004e, 63, 34, 0 ), + V( 34, 0x003b, 32, 35, 0 ), + V( 35, 0x002c, 33, 9, 0 ), + V( 36, 0x5ae1, 37, 37, 1 ), + V( 37, 0x484c, 64, 38, 0 ), + V( 38, 0x3a0d, 65, 39, 0 ), + V( 39, 0x2ef1, 67, 40, 0 ), + V( 40, 0x261f, 68, 41, 0 ), + V( 41, 0x1f33, 69, 42, 0 ), + V( 42, 0x19a8, 70, 43, 0 ), + V( 43, 0x1518, 72, 44, 0 ), + V( 44, 0x1177, 73, 45, 0 ), + V( 45, 0x0e74, 74, 46, 0 ), + V( 46, 0x0bfb, 75, 47, 0 ), + V( 47, 0x09f8, 77, 48, 0 ), + V( 48, 0x0861, 78, 49, 0 ), + V( 49, 0x0706, 79, 50, 0 ), + V( 50, 0x05cd, 48, 51, 0 ), + V( 51, 0x04de, 50, 52, 0 ), + V( 52, 0x040f, 50, 53, 0 ), + V( 53, 0x0363, 51, 54, 0 ), + V( 54, 0x02d4, 52, 55, 0 ), + V( 55, 0x025c, 53, 56, 0 ), + V( 56, 0x01f8, 54, 57, 0 ), + V( 57, 0x01a4, 55, 58, 0 ), + V( 58, 0x0160, 56, 59, 0 ), + V( 59, 0x0125, 57, 60, 0 ), + V( 60, 0x00f6, 58, 61, 0 ), + V( 61, 0x00cb, 59, 62, 0 ), + V( 62, 0x00ab, 61, 63, 0 ), + V( 63, 0x008f, 61, 32, 0 ), + V( 64, 0x5b12, 65, 65, 1 ), + V( 65, 0x4d04, 80, 66, 0 ), + V( 66, 0x412c, 81, 67, 0 ), + V( 67, 0x37d8, 82, 68, 0 ), + V( 68, 0x2fe8, 83, 69, 0 ), + V( 69, 0x293c, 84, 70, 0 ), + V( 70, 0x2379, 86, 71, 0 ), + V( 71, 0x1edf, 87, 72, 0 ), + V( 72, 0x1aa9, 87, 73, 0 ), + V( 73, 0x174e, 72, 74, 0 ), + V( 74, 0x1424, 72, 75, 0 ), + V( 75, 0x119c, 74, 76, 0 ), + V( 76, 0x0f6b, 74, 77, 0 ), + V( 77, 0x0d51, 75, 78, 0 ), + V( 78, 0x0bb6, 77, 79, 0 ), + V( 79, 0x0a40, 77, 48, 0 ), + V( 80, 0x5832, 80, 81, 1 ), + V( 81, 0x4d1c, 88, 82, 0 ), + V( 82, 0x438e, 89, 83, 0 ), + V( 83, 0x3bdd, 90, 84, 0 ), + V( 84, 0x34ee, 91, 85, 0 ), + V( 85, 0x2eae, 92, 86, 0 ), + V( 86, 0x299a, 93, 87, 0 ), + V( 87, 0x2516, 86, 71, 0 ), + V( 88, 0x5570, 88, 89, 1 ), + V( 89, 0x4ca9, 95, 90, 0 ), + V( 90, 0x44d9, 96, 91, 0 ), + V( 91, 0x3e22, 97, 92, 0 ), + V( 92, 0x3824, 99, 93, 0 ), + V( 93, 0x32b4, 99, 94, 0 ), + V( 94, 0x2e17, 93, 86, 0 ), + V( 95, 0x56a8, 95, 96, 1 ), + V( 96, 0x4f46, 101, 97, 0 ), + V( 97, 0x47e5, 102, 98, 0 ), + V( 98, 0x41cf, 103, 99, 0 ), + V( 99, 0x3c3d, 104, 100, 0 ), + V( 100, 0x375e, 99, 93, 0 ), + V( 101, 0x5231, 105, 102, 0 ), + V( 102, 0x4c0f, 106, 103, 0 ), + V( 103, 0x4639, 107, 104, 0 ), + V( 104, 0x415e, 103, 99, 0 ), + V( 105, 0x5627, 105, 106, 1 ), + V( 106, 0x50e7, 108, 107, 0 ), + V( 107, 0x4b85, 109, 103, 0 ), + V( 108, 0x5597, 110, 109, 0 ), + V( 109, 0x504f, 111, 107, 0 ), + V( 110, 0x5a10, 110, 111, 1 ), + V( 111, 0x5522, 112, 109, 0 ), + V( 112, 0x59eb, 112, 111, 1 ), +/* + * This last entry is used for fixed probability estimate of 0.5 + * as suggested in Section 10.3 Table 5 of ITU-T Rec. T.851. + */ + V( 113, 0x5a1d, 113, 113, 0 ) +}; diff --git a/compat/libjpeg/jcapimin.c b/compat/libjpeg/jcapimin.c new file mode 100755 index 0000000..3382d91 --- /dev/null +++ b/compat/libjpeg/jcapimin.c @@ -0,0 +1,288 @@ +/* + * jcapimin.c + * + * Copyright (C) 1994-1998, Thomas G. Lane. + * Modified 2003-2010 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains application interface code for the compression half + * of the JPEG library. These are the "minimum" API routines that may be + * needed in either the normal full-compression case or the transcoding-only + * case. + * + * Most of the routines intended to be called directly by an application + * are in this file or in jcapistd.c. But also see jcparam.c for + * parameter-setup helper routines, jcomapi.c for routines shared by + * compression and decompression, and jctrans.c for the transcoding case. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * Initialization of a JPEG compression object. + * The error manager must already be set up (in case memory manager fails). + */ + +GLOBAL(void) +jpeg_CreateCompress (j_compress_ptr cinfo, int version, size_t structsize) +{ + int i; + + /* Guard against version mismatches between library and caller. */ + cinfo->mem = NULL; /* so jpeg_destroy knows mem mgr not called */ + if (version != JPEG_LIB_VERSION) + ERREXIT2(cinfo, JERR_BAD_LIB_VERSION, JPEG_LIB_VERSION, version); + if (structsize != SIZEOF(struct jpeg_compress_struct)) + ERREXIT2(cinfo, JERR_BAD_STRUCT_SIZE, + (int) SIZEOF(struct jpeg_compress_struct), (int) structsize); + + /* For debugging purposes, we zero the whole master structure. + * But the application has already set the err pointer, and may have set + * client_data, so we have to save and restore those fields. + * Note: if application hasn't set client_data, tools like Purify may + * complain here. + */ + { + struct jpeg_error_mgr * err = cinfo->err; + void * client_data = cinfo->client_data; /* ignore Purify complaint here */ + MEMZERO(cinfo, SIZEOF(struct jpeg_compress_struct)); + cinfo->err = err; + cinfo->client_data = client_data; + } + cinfo->is_decompressor = FALSE; + + /* Initialize a memory manager instance for this object */ + jinit_memory_mgr((j_common_ptr) cinfo); + + /* Zero out pointers to permanent structures. */ + cinfo->progress = NULL; + cinfo->dest = NULL; + + cinfo->comp_info = NULL; + + for (i = 0; i < NUM_QUANT_TBLS; i++) { + cinfo->quant_tbl_ptrs[i] = NULL; + cinfo->q_scale_factor[i] = 100; + } + + for (i = 0; i < NUM_HUFF_TBLS; i++) { + cinfo->dc_huff_tbl_ptrs[i] = NULL; + cinfo->ac_huff_tbl_ptrs[i] = NULL; + } + + /* Must do it here for emit_dqt in case jpeg_write_tables is used */ + cinfo->block_size = DCTSIZE; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + + cinfo->script_space = NULL; + + cinfo->input_gamma = 1.0; /* in case application forgets */ + + /* OK, I'm ready */ + cinfo->global_state = CSTATE_START; +} + + +/* + * Destruction of a JPEG compression object + */ + +GLOBAL(void) +jpeg_destroy_compress (j_compress_ptr cinfo) +{ + jpeg_destroy((j_common_ptr) cinfo); /* use common routine */ +} + + +/* + * Abort processing of a JPEG compression operation, + * but don't destroy the object itself. + */ + +GLOBAL(void) +jpeg_abort_compress (j_compress_ptr cinfo) +{ + jpeg_abort((j_common_ptr) cinfo); /* use common routine */ +} + + +/* + * Forcibly suppress or un-suppress all quantization and Huffman tables. + * Marks all currently defined tables as already written (if suppress) + * or not written (if !suppress). This will control whether they get emitted + * by a subsequent jpeg_start_compress call. + * + * This routine is exported for use by applications that want to produce + * abbreviated JPEG datastreams. It logically belongs in jcparam.c, but + * since it is called by jpeg_start_compress, we put it here --- otherwise + * jcparam.o would be linked whether the application used it or not. + */ + +GLOBAL(void) +jpeg_suppress_tables (j_compress_ptr cinfo, boolean suppress) +{ + int i; + JQUANT_TBL * qtbl; + JHUFF_TBL * htbl; + + for (i = 0; i < NUM_QUANT_TBLS; i++) { + if ((qtbl = cinfo->quant_tbl_ptrs[i]) != NULL) + qtbl->sent_table = suppress; + } + + for (i = 0; i < NUM_HUFF_TBLS; i++) { + if ((htbl = cinfo->dc_huff_tbl_ptrs[i]) != NULL) + htbl->sent_table = suppress; + if ((htbl = cinfo->ac_huff_tbl_ptrs[i]) != NULL) + htbl->sent_table = suppress; + } +} + + +/* + * Finish JPEG compression. + * + * If a multipass operating mode was selected, this may do a great deal of + * work including most of the actual output. + */ + +GLOBAL(void) +jpeg_finish_compress (j_compress_ptr cinfo) +{ + JDIMENSION iMCU_row; + + if (cinfo->global_state == CSTATE_SCANNING || + cinfo->global_state == CSTATE_RAW_OK) { + /* Terminate first pass */ + if (cinfo->next_scanline < cinfo->image_height) + ERREXIT(cinfo, JERR_TOO_LITTLE_DATA); + (*cinfo->master->finish_pass) (cinfo); + } else if (cinfo->global_state != CSTATE_WRCOEFS) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + /* Perform any remaining passes */ + while (! cinfo->master->is_last_pass) { + (*cinfo->master->prepare_for_pass) (cinfo); + for (iMCU_row = 0; iMCU_row < cinfo->total_iMCU_rows; iMCU_row++) { + if (cinfo->progress != NULL) { + cinfo->progress->pass_counter = (long) iMCU_row; + cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows; + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + } + /* We bypass the main controller and invoke coef controller directly; + * all work is being done from the coefficient buffer. + */ + if (! (*cinfo->coef->compress_data) (cinfo, (JSAMPIMAGE) NULL)) + ERREXIT(cinfo, JERR_CANT_SUSPEND); + } + (*cinfo->master->finish_pass) (cinfo); + } + /* Write EOI, do final cleanup */ + (*cinfo->marker->write_file_trailer) (cinfo); + (*cinfo->dest->term_destination) (cinfo); + /* We can use jpeg_abort to release memory and reset global_state */ + jpeg_abort((j_common_ptr) cinfo); +} + + +/* + * Write a special marker. + * This is only recommended for writing COM or APPn markers. + * Must be called after jpeg_start_compress() and before + * first call to jpeg_write_scanlines() or jpeg_write_raw_data(). + */ + +GLOBAL(void) +jpeg_write_marker (j_compress_ptr cinfo, int marker, + const JOCTET *dataptr, unsigned int datalen) +{ + JMETHOD(void, write_marker_byte, (j_compress_ptr info, int val)); + + if (cinfo->next_scanline != 0 || + (cinfo->global_state != CSTATE_SCANNING && + cinfo->global_state != CSTATE_RAW_OK && + cinfo->global_state != CSTATE_WRCOEFS)) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + (*cinfo->marker->write_marker_header) (cinfo, marker, datalen); + write_marker_byte = cinfo->marker->write_marker_byte; /* copy for speed */ + while (datalen--) { + (*write_marker_byte) (cinfo, *dataptr); + dataptr++; + } +} + +/* Same, but piecemeal. */ + +GLOBAL(void) +jpeg_write_m_header (j_compress_ptr cinfo, int marker, unsigned int datalen) +{ + if (cinfo->next_scanline != 0 || + (cinfo->global_state != CSTATE_SCANNING && + cinfo->global_state != CSTATE_RAW_OK && + cinfo->global_state != CSTATE_WRCOEFS)) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + (*cinfo->marker->write_marker_header) (cinfo, marker, datalen); +} + +GLOBAL(void) +jpeg_write_m_byte (j_compress_ptr cinfo, int val) +{ + (*cinfo->marker->write_marker_byte) (cinfo, val); +} + + +/* + * Alternate compression function: just write an abbreviated table file. + * Before calling this, all parameters and a data destination must be set up. + * + * To produce a pair of files containing abbreviated tables and abbreviated + * image data, one would proceed as follows: + * + * initialize JPEG object + * set JPEG parameters + * set destination to table file + * jpeg_write_tables(cinfo); + * set destination to image file + * jpeg_start_compress(cinfo, FALSE); + * write data... + * jpeg_finish_compress(cinfo); + * + * jpeg_write_tables has the side effect of marking all tables written + * (same as jpeg_suppress_tables(..., TRUE)). Thus a subsequent start_compress + * will not re-emit the tables unless it is passed write_all_tables=TRUE. + */ + +GLOBAL(void) +jpeg_write_tables (j_compress_ptr cinfo) +{ + if (cinfo->global_state != CSTATE_START) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + /* (Re)initialize error mgr and destination modules */ + (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo); + (*cinfo->dest->init_destination) (cinfo); + /* Initialize the marker writer ... bit of a crock to do it here. */ + jinit_marker_writer(cinfo); + /* Write them tables! */ + (*cinfo->marker->write_tables_only) (cinfo); + /* And clean up. */ + (*cinfo->dest->term_destination) (cinfo); + /* + * In library releases up through v6a, we called jpeg_abort() here to free + * any working memory allocated by the destination manager and marker + * writer. Some applications had a problem with that: they allocated space + * of their own from the library memory manager, and didn't want it to go + * away during write_tables. So now we do nothing. This will cause a + * memory leak if an app calls write_tables repeatedly without doing a full + * compression cycle or otherwise resetting the JPEG object. However, that + * seems less bad than unexpectedly freeing memory in the normal case. + * An app that prefers the old behavior can call jpeg_abort for itself after + * each call to jpeg_write_tables(). + */ +} diff --git a/compat/libjpeg/jcapistd.c b/compat/libjpeg/jcapistd.c new file mode 100755 index 0000000..8892bfa --- /dev/null +++ b/compat/libjpeg/jcapistd.c @@ -0,0 +1,162 @@ +/* + * jcapistd.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2013 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains application interface code for the compression half + * of the JPEG library. These are the "standard" API routines that are + * used in the normal full-compression case. They are not used by a + * transcoding-only application. Note that if an application links in + * jpeg_start_compress, it will end up linking in the entire compressor. + * We thus must separate this file from jcapimin.c to avoid linking the + * whole compression library into a transcoder. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * Compression initialization. + * Before calling this, all parameters and a data destination must be set up. + * + * We require a write_all_tables parameter as a failsafe check when writing + * multiple datastreams from the same compression object. Since prior runs + * will have left all the tables marked sent_table=TRUE, a subsequent run + * would emit an abbreviated stream (no tables) by default. This may be what + * is wanted, but for safety's sake it should not be the default behavior: + * programmers should have to make a deliberate choice to emit abbreviated + * images. Therefore the documentation and examples should encourage people + * to pass write_all_tables=TRUE; then it will take active thought to do the + * wrong thing. + */ + +GLOBAL(void) +jpeg_start_compress (j_compress_ptr cinfo, boolean write_all_tables) +{ + if (cinfo->global_state != CSTATE_START) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + if (write_all_tables) + jpeg_suppress_tables(cinfo, FALSE); /* mark all tables to be written */ + + /* (Re)initialize error mgr and destination modules */ + (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo); + (*cinfo->dest->init_destination) (cinfo); + /* Perform master selection of active modules */ + jinit_compress_master(cinfo); + /* Set up for the first pass */ + (*cinfo->master->prepare_for_pass) (cinfo); + /* Ready for application to drive first pass through jpeg_write_scanlines + * or jpeg_write_raw_data. + */ + cinfo->next_scanline = 0; + cinfo->global_state = (cinfo->raw_data_in ? CSTATE_RAW_OK : CSTATE_SCANNING); +} + + +/* + * Write some scanlines of data to the JPEG compressor. + * + * The return value will be the number of lines actually written. + * This should be less than the supplied num_lines only in case that + * the data destination module has requested suspension of the compressor, + * or if more than image_height scanlines are passed in. + * + * Note: we warn about excess calls to jpeg_write_scanlines() since + * this likely signals an application programmer error. However, + * excess scanlines passed in the last valid call are *silently* ignored, + * so that the application need not adjust num_lines for end-of-image + * when using a multiple-scanline buffer. + */ + +GLOBAL(JDIMENSION) +jpeg_write_scanlines (j_compress_ptr cinfo, JSAMPARRAY scanlines, + JDIMENSION num_lines) +{ + JDIMENSION row_ctr, rows_left; + + if (cinfo->global_state != CSTATE_SCANNING) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + if (cinfo->next_scanline >= cinfo->image_height) + WARNMS(cinfo, JWRN_TOO_MUCH_DATA); + + /* Call progress monitor hook if present */ + if (cinfo->progress != NULL) { + cinfo->progress->pass_counter = (long) cinfo->next_scanline; + cinfo->progress->pass_limit = (long) cinfo->image_height; + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + } + + /* Give master control module another chance if this is first call to + * jpeg_write_scanlines. This lets output of the frame/scan headers be + * delayed so that application can write COM, etc, markers between + * jpeg_start_compress and jpeg_write_scanlines. + */ + if (cinfo->master->call_pass_startup) + (*cinfo->master->pass_startup) (cinfo); + + /* Ignore any extra scanlines at bottom of image. */ + rows_left = cinfo->image_height - cinfo->next_scanline; + if (num_lines > rows_left) + num_lines = rows_left; + + row_ctr = 0; + (*cinfo->main->process_data) (cinfo, scanlines, &row_ctr, num_lines); + cinfo->next_scanline += row_ctr; + return row_ctr; +} + + +/* + * Alternate entry point to write raw data. + * Processes exactly one iMCU row per call, unless suspended. + */ + +GLOBAL(JDIMENSION) +jpeg_write_raw_data (j_compress_ptr cinfo, JSAMPIMAGE data, + JDIMENSION num_lines) +{ + JDIMENSION lines_per_iMCU_row; + + if (cinfo->global_state != CSTATE_RAW_OK) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + if (cinfo->next_scanline >= cinfo->image_height) { + WARNMS(cinfo, JWRN_TOO_MUCH_DATA); + return 0; + } + + /* Call progress monitor hook if present */ + if (cinfo->progress != NULL) { + cinfo->progress->pass_counter = (long) cinfo->next_scanline; + cinfo->progress->pass_limit = (long) cinfo->image_height; + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + } + + /* Give master control module another chance if this is first call to + * jpeg_write_raw_data. This lets output of the frame/scan headers be + * delayed so that application can write COM, etc, markers between + * jpeg_start_compress and jpeg_write_raw_data. + */ + if (cinfo->master->call_pass_startup) + (*cinfo->master->pass_startup) (cinfo); + + /* Verify that at least one iMCU row has been passed. */ + lines_per_iMCU_row = cinfo->max_v_samp_factor * cinfo->min_DCT_v_scaled_size; + if (num_lines < lines_per_iMCU_row) + ERREXIT(cinfo, JERR_BUFFER_SIZE); + + /* Directly compress the row. */ + if (! (*cinfo->coef->compress_data) (cinfo, data)) { + /* If compressor did not consume the whole row, suspend processing. */ + return 0; + } + + /* OK, we processed one iMCU row. */ + cinfo->next_scanline += lines_per_iMCU_row; + return lines_per_iMCU_row; +} diff --git a/compat/libjpeg/jcarith.c b/compat/libjpeg/jcarith.c new file mode 100755 index 0000000..a64190e --- /dev/null +++ b/compat/libjpeg/jcarith.c @@ -0,0 +1,944 @@ +/* + * jcarith.c + * + * Developed 1997-2013 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains portable arithmetic entropy encoding routines for JPEG + * (implementing the ISO/IEC IS 10918-1 and CCITT Recommendation ITU-T T.81). + * + * Both sequential and progressive modes are supported in this single module. + * + * Suspension is not currently supported in this module. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Expanded entropy encoder object for arithmetic encoding. */ + +typedef struct { + struct jpeg_entropy_encoder pub; /* public fields */ + + INT32 c; /* C register, base of coding interval, layout as in sec. D.1.3 */ + INT32 a; /* A register, normalized size of coding interval */ + INT32 sc; /* counter for stacked 0xFF values which might overflow */ + INT32 zc; /* counter for pending 0x00 output values which might * + * be discarded at the end ("Pacman" termination) */ + int ct; /* bit shift counter, determines when next byte will be written */ + int buffer; /* buffer for most recent output byte != 0xFF */ + + int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ + int dc_context[MAX_COMPS_IN_SCAN]; /* context index for DC conditioning */ + + unsigned int restarts_to_go; /* MCUs left in this restart interval */ + int next_restart_num; /* next restart number to write (0-7) */ + + /* Pointers to statistics areas (these workspaces have image lifespan) */ + unsigned char * dc_stats[NUM_ARITH_TBLS]; + unsigned char * ac_stats[NUM_ARITH_TBLS]; + + /* Statistics bin for coding with fixed probability 0.5 */ + unsigned char fixed_bin[4]; +} arith_entropy_encoder; + +typedef arith_entropy_encoder * arith_entropy_ptr; + +/* The following two definitions specify the allocation chunk size + * for the statistics area. + * According to sections F.1.4.4.1.3 and F.1.4.4.2, we need at least + * 49 statistics bins for DC, and 245 statistics bins for AC coding. + * + * We use a compact representation with 1 byte per statistics bin, + * thus the numbers directly represent byte sizes. + * This 1 byte per statistics bin contains the meaning of the MPS + * (more probable symbol) in the highest bit (mask 0x80), and the + * index into the probability estimation state machine table + * in the lower bits (mask 0x7F). + */ + +#define DC_STAT_BINS 64 +#define AC_STAT_BINS 256 + +/* NOTE: Uncomment the following #define if you want to use the + * given formula for calculating the AC conditioning parameter Kx + * for spectral selection progressive coding in section G.1.3.2 + * of the spec (Kx = Kmin + SRL (8 + Se - Kmin) 4). + * Although the spec and P&M authors claim that this "has proven + * to give good results for 8 bit precision samples", I'm not + * convinced yet that this is really beneficial. + * Early tests gave only very marginal compression enhancements + * (a few - around 5 or so - bytes even for very large files), + * which would turn out rather negative if we'd suppress the + * DAC (Define Arithmetic Conditioning) marker segments for + * the default parameters in the future. + * Note that currently the marker writing module emits 12-byte + * DAC segments for a full-component scan in a color image. + * This is not worth worrying about IMHO. However, since the + * spec defines the default values to be used if the tables + * are omitted (unlike Huffman tables, which are required + * anyway), one might optimize this behaviour in the future, + * and then it would be disadvantageous to use custom tables if + * they don't provide sufficient gain to exceed the DAC size. + * + * On the other hand, I'd consider it as a reasonable result + * that the conditioning has no significant influence on the + * compression performance. This means that the basic + * statistical model is already rather stable. + * + * Thus, at the moment, we use the default conditioning values + * anyway, and do not use the custom formula. + * +#define CALCULATE_SPECTRAL_CONDITIONING + */ + +/* IRIGHT_SHIFT is like RIGHT_SHIFT, but works on int rather than INT32. + * We assume that int right shift is unsigned if INT32 right shift is, + * which should be safe. + */ + +#ifdef RIGHT_SHIFT_IS_UNSIGNED +#define ISHIFT_TEMPS int ishift_temp; +#define IRIGHT_SHIFT(x,shft) \ + ((ishift_temp = (x)) < 0 ? \ + (ishift_temp >> (shft)) | ((~0) << (16-(shft))) : \ + (ishift_temp >> (shft))) +#else +#define ISHIFT_TEMPS +#define IRIGHT_SHIFT(x,shft) ((x) >> (shft)) +#endif + + +LOCAL(void) +emit_byte (int val, j_compress_ptr cinfo) +/* Write next output byte; we do not support suspension in this module. */ +{ + struct jpeg_destination_mgr * dest = cinfo->dest; + + *dest->next_output_byte++ = (JOCTET) val; + if (--dest->free_in_buffer == 0) + if (! (*dest->empty_output_buffer) (cinfo)) + ERREXIT(cinfo, JERR_CANT_SUSPEND); +} + + +/* + * Finish up at the end of an arithmetic-compressed scan. + */ + +METHODDEF(void) +finish_pass (j_compress_ptr cinfo) +{ + arith_entropy_ptr e = (arith_entropy_ptr) cinfo->entropy; + INT32 temp; + + /* Section D.1.8: Termination of encoding */ + + /* Find the e->c in the coding interval with the largest + * number of trailing zero bits */ + if ((temp = (e->a - 1 + e->c) & 0xFFFF0000L) < e->c) + e->c = temp + 0x8000L; + else + e->c = temp; + /* Send remaining bytes to output */ + e->c <<= e->ct; + if (e->c & 0xF8000000L) { + /* One final overflow has to be handled */ + if (e->buffer >= 0) { + if (e->zc) + do emit_byte(0x00, cinfo); + while (--e->zc); + emit_byte(e->buffer + 1, cinfo); + if (e->buffer + 1 == 0xFF) + emit_byte(0x00, cinfo); + } + e->zc += e->sc; /* carry-over converts stacked 0xFF bytes to 0x00 */ + e->sc = 0; + } else { + if (e->buffer == 0) + ++e->zc; + else if (e->buffer >= 0) { + if (e->zc) + do emit_byte(0x00, cinfo); + while (--e->zc); + emit_byte(e->buffer, cinfo); + } + if (e->sc) { + if (e->zc) + do emit_byte(0x00, cinfo); + while (--e->zc); + do { + emit_byte(0xFF, cinfo); + emit_byte(0x00, cinfo); + } while (--e->sc); + } + } + /* Output final bytes only if they are not 0x00 */ + if (e->c & 0x7FFF800L) { + if (e->zc) /* output final pending zero bytes */ + do emit_byte(0x00, cinfo); + while (--e->zc); + emit_byte((e->c >> 19) & 0xFF, cinfo); + if (((e->c >> 19) & 0xFF) == 0xFF) + emit_byte(0x00, cinfo); + if (e->c & 0x7F800L) { + emit_byte((e->c >> 11) & 0xFF, cinfo); + if (((e->c >> 11) & 0xFF) == 0xFF) + emit_byte(0x00, cinfo); + } + } +} + + +/* + * The core arithmetic encoding routine (common in JPEG and JBIG). + * This needs to go as fast as possible. + * Machine-dependent optimization facilities + * are not utilized in this portable implementation. + * However, this code should be fairly efficient and + * may be a good base for further optimizations anyway. + * + * Parameter 'val' to be encoded may be 0 or 1 (binary decision). + * + * Note: I've added full "Pacman" termination support to the + * byte output routines, which is equivalent to the optional + * Discard_final_zeros procedure (Figure D.15) in the spec. + * Thus, we always produce the shortest possible output + * stream compliant to the spec (no trailing zero bytes, + * except for FF stuffing). + * + * I've also introduced a new scheme for accessing + * the probability estimation state machine table, + * derived from Markus Kuhn's JBIG implementation. + */ + +LOCAL(void) +arith_encode (j_compress_ptr cinfo, unsigned char *st, int val) +{ + register arith_entropy_ptr e = (arith_entropy_ptr) cinfo->entropy; + register unsigned char nl, nm; + register INT32 qe, temp; + register int sv; + + /* Fetch values from our compact representation of Table D.3(D.2): + * Qe values and probability estimation state machine + */ + sv = *st; + qe = jpeg_aritab[sv & 0x7F]; /* => Qe_Value */ + nl = qe & 0xFF; qe >>= 8; /* Next_Index_LPS + Switch_MPS */ + nm = qe & 0xFF; qe >>= 8; /* Next_Index_MPS */ + + /* Encode & estimation procedures per sections D.1.4 & D.1.5 */ + e->a -= qe; + if (val != (sv >> 7)) { + /* Encode the less probable symbol */ + if (e->a >= qe) { + /* If the interval size (qe) for the less probable symbol (LPS) + * is larger than the interval size for the MPS, then exchange + * the two symbols for coding efficiency, otherwise code the LPS + * as usual: */ + e->c += e->a; + e->a = qe; + } + *st = (sv & 0x80) ^ nl; /* Estimate_after_LPS */ + } else { + /* Encode the more probable symbol */ + if (e->a >= 0x8000L) + return; /* A >= 0x8000 -> ready, no renormalization required */ + if (e->a < qe) { + /* If the interval size (qe) for the less probable symbol (LPS) + * is larger than the interval size for the MPS, then exchange + * the two symbols for coding efficiency: */ + e->c += e->a; + e->a = qe; + } + *st = (sv & 0x80) ^ nm; /* Estimate_after_MPS */ + } + + /* Renormalization & data output per section D.1.6 */ + do { + e->a <<= 1; + e->c <<= 1; + if (--e->ct == 0) { + /* Another byte is ready for output */ + temp = e->c >> 19; + if (temp > 0xFF) { + /* Handle overflow over all stacked 0xFF bytes */ + if (e->buffer >= 0) { + if (e->zc) + do emit_byte(0x00, cinfo); + while (--e->zc); + emit_byte(e->buffer + 1, cinfo); + if (e->buffer + 1 == 0xFF) + emit_byte(0x00, cinfo); + } + e->zc += e->sc; /* carry-over converts stacked 0xFF bytes to 0x00 */ + e->sc = 0; + /* Note: The 3 spacer bits in the C register guarantee + * that the new buffer byte can't be 0xFF here + * (see page 160 in the P&M JPEG book). */ + e->buffer = temp & 0xFF; /* new output byte, might overflow later */ + } else if (temp == 0xFF) { + ++e->sc; /* stack 0xFF byte (which might overflow later) */ + } else { + /* Output all stacked 0xFF bytes, they will not overflow any more */ + if (e->buffer == 0) + ++e->zc; + else if (e->buffer >= 0) { + if (e->zc) + do emit_byte(0x00, cinfo); + while (--e->zc); + emit_byte(e->buffer, cinfo); + } + if (e->sc) { + if (e->zc) + do emit_byte(0x00, cinfo); + while (--e->zc); + do { + emit_byte(0xFF, cinfo); + emit_byte(0x00, cinfo); + } while (--e->sc); + } + e->buffer = temp & 0xFF; /* new output byte (can still overflow) */ + } + e->c &= 0x7FFFFL; + e->ct += 8; + } + } while (e->a < 0x8000L); +} + + +/* + * Emit a restart marker & resynchronize predictions. + */ + +LOCAL(void) +emit_restart (j_compress_ptr cinfo, int restart_num) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + int ci; + jpeg_component_info * compptr; + + finish_pass(cinfo); + + emit_byte(0xFF, cinfo); + emit_byte(JPEG_RST0 + restart_num, cinfo); + + /* Re-initialize statistics areas */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* DC needs no table for refinement scan */ + if (cinfo->Ss == 0 && cinfo->Ah == 0) { + MEMZERO(entropy->dc_stats[compptr->dc_tbl_no], DC_STAT_BINS); + /* Reset DC predictions to 0 */ + entropy->last_dc_val[ci] = 0; + entropy->dc_context[ci] = 0; + } + /* AC needs no table when not present */ + if (cinfo->Se) { + MEMZERO(entropy->ac_stats[compptr->ac_tbl_no], AC_STAT_BINS); + } + } + + /* Reset arithmetic encoding variables */ + entropy->c = 0; + entropy->a = 0x10000L; + entropy->sc = 0; + entropy->zc = 0; + entropy->ct = 11; + entropy->buffer = -1; /* empty */ +} + + +/* + * MCU encoding for DC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + unsigned char *st; + int blkn, ci, tbl; + int v, v2, m; + ISHIFT_TEMPS + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + emit_restart(cinfo, entropy->next_restart_num); + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + /* Encode the MCU data blocks */ + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + ci = cinfo->MCU_membership[blkn]; + tbl = cinfo->cur_comp_info[ci]->dc_tbl_no; + + /* Compute the DC value after the required point transform by Al. + * This is simply an arithmetic right shift. + */ + m = IRIGHT_SHIFT((int) (MCU_data[blkn][0][0]), cinfo->Al); + + /* Sections F.1.4.1 & F.1.4.4.1: Encoding of DC coefficients */ + + /* Table F.4: Point to statistics bin S0 for DC coefficient coding */ + st = entropy->dc_stats[tbl] + entropy->dc_context[ci]; + + /* Figure F.4: Encode_DC_DIFF */ + if ((v = m - entropy->last_dc_val[ci]) == 0) { + arith_encode(cinfo, st, 0); + entropy->dc_context[ci] = 0; /* zero diff category */ + } else { + entropy->last_dc_val[ci] = m; + arith_encode(cinfo, st, 1); + /* Figure F.6: Encoding nonzero value v */ + /* Figure F.7: Encoding the sign of v */ + if (v > 0) { + arith_encode(cinfo, st + 1, 0); /* Table F.4: SS = S0 + 1 */ + st += 2; /* Table F.4: SP = S0 + 2 */ + entropy->dc_context[ci] = 4; /* small positive diff category */ + } else { + v = -v; + arith_encode(cinfo, st + 1, 1); /* Table F.4: SS = S0 + 1 */ + st += 3; /* Table F.4: SN = S0 + 3 */ + entropy->dc_context[ci] = 8; /* small negative diff category */ + } + /* Figure F.8: Encoding the magnitude category of v */ + m = 0; + if (v -= 1) { + arith_encode(cinfo, st, 1); + m = 1; + v2 = v; + st = entropy->dc_stats[tbl] + 20; /* Table F.4: X1 = 20 */ + while (v2 >>= 1) { + arith_encode(cinfo, st, 1); + m <<= 1; + st += 1; + } + } + arith_encode(cinfo, st, 0); + /* Section F.1.4.4.1.2: Establish dc_context conditioning category */ + if (m < (int) ((1L << cinfo->arith_dc_L[tbl]) >> 1)) + entropy->dc_context[ci] = 0; /* zero diff category */ + else if (m > (int) ((1L << cinfo->arith_dc_U[tbl]) >> 1)) + entropy->dc_context[ci] += 8; /* large diff category */ + /* Figure F.9: Encoding the magnitude bit pattern of v */ + st += 14; + while (m >>= 1) + arith_encode(cinfo, st, (m & v) ? 1 : 0); + } + } + + return TRUE; +} + + +/* + * MCU encoding for AC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + const int * natural_order; + JBLOCKROW block; + unsigned char *st; + int tbl, k, ke; + int v, v2, m; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + emit_restart(cinfo, entropy->next_restart_num); + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + natural_order = cinfo->natural_order; + + /* Encode the MCU data block */ + block = MCU_data[0]; + tbl = cinfo->cur_comp_info[0]->ac_tbl_no; + + /* Sections F.1.4.2 & F.1.4.4.2: Encoding of AC coefficients */ + + /* Establish EOB (end-of-block) index */ + ke = cinfo->Se; + do { + /* We must apply the point transform by Al. For AC coefficients this + * is an integer division with rounding towards 0. To do this portably + * in C, we shift after obtaining the absolute value. + */ + if ((v = (*block)[natural_order[ke]]) >= 0) { + if (v >>= cinfo->Al) break; + } else { + v = -v; + if (v >>= cinfo->Al) break; + } + } while (--ke); + + /* Figure F.5: Encode_AC_Coefficients */ + for (k = cinfo->Ss - 1; k < ke;) { + st = entropy->ac_stats[tbl] + 3 * k; + arith_encode(cinfo, st, 0); /* EOB decision */ + for (;;) { + if ((v = (*block)[natural_order[++k]]) >= 0) { + if (v >>= cinfo->Al) { + arith_encode(cinfo, st + 1, 1); + arith_encode(cinfo, entropy->fixed_bin, 0); + break; + } + } else { + v = -v; + if (v >>= cinfo->Al) { + arith_encode(cinfo, st + 1, 1); + arith_encode(cinfo, entropy->fixed_bin, 1); + break; + } + } + arith_encode(cinfo, st + 1, 0); + st += 3; + } + st += 2; + /* Figure F.8: Encoding the magnitude category of v */ + m = 0; + if (v -= 1) { + arith_encode(cinfo, st, 1); + m = 1; + v2 = v; + if (v2 >>= 1) { + arith_encode(cinfo, st, 1); + m <<= 1; + st = entropy->ac_stats[tbl] + + (k <= cinfo->arith_ac_K[tbl] ? 189 : 217); + while (v2 >>= 1) { + arith_encode(cinfo, st, 1); + m <<= 1; + st += 1; + } + } + } + arith_encode(cinfo, st, 0); + /* Figure F.9: Encoding the magnitude bit pattern of v */ + st += 14; + while (m >>= 1) + arith_encode(cinfo, st, (m & v) ? 1 : 0); + } + /* Encode EOB decision only if k < cinfo->Se */ + if (k < cinfo->Se) { + st = entropy->ac_stats[tbl] + 3 * k; + arith_encode(cinfo, st, 1); + } + + return TRUE; +} + + +/* + * MCU encoding for DC successive approximation refinement scan. + * Note: we assume such scans can be multi-component, + * although the spec is not very clear on the point. + */ + +METHODDEF(boolean) +encode_mcu_DC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + unsigned char *st; + int Al, blkn; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + emit_restart(cinfo, entropy->next_restart_num); + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + st = entropy->fixed_bin; /* use fixed probability estimation */ + Al = cinfo->Al; + + /* Encode the MCU data blocks */ + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + /* We simply emit the Al'th bit of the DC coefficient value. */ + arith_encode(cinfo, st, (MCU_data[blkn][0][0] >> Al) & 1); + } + + return TRUE; +} + + +/* + * MCU encoding for AC successive approximation refinement scan. + */ + +METHODDEF(boolean) +encode_mcu_AC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + const int * natural_order; + JBLOCKROW block; + unsigned char *st; + int tbl, k, ke, kex; + int v; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + emit_restart(cinfo, entropy->next_restart_num); + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + natural_order = cinfo->natural_order; + + /* Encode the MCU data block */ + block = MCU_data[0]; + tbl = cinfo->cur_comp_info[0]->ac_tbl_no; + + /* Section G.1.3.3: Encoding of AC coefficients */ + + /* Establish EOB (end-of-block) index */ + ke = cinfo->Se; + do { + /* We must apply the point transform by Al. For AC coefficients this + * is an integer division with rounding towards 0. To do this portably + * in C, we shift after obtaining the absolute value. + */ + if ((v = (*block)[natural_order[ke]]) >= 0) { + if (v >>= cinfo->Al) break; + } else { + v = -v; + if (v >>= cinfo->Al) break; + } + } while (--ke); + + /* Establish EOBx (previous stage end-of-block) index */ + for (kex = ke; kex > 0; kex--) + if ((v = (*block)[natural_order[kex]]) >= 0) { + if (v >>= cinfo->Ah) break; + } else { + v = -v; + if (v >>= cinfo->Ah) break; + } + + /* Figure G.10: Encode_AC_Coefficients_SA */ + for (k = cinfo->Ss - 1; k < ke;) { + st = entropy->ac_stats[tbl] + 3 * k; + if (k >= kex) + arith_encode(cinfo, st, 0); /* EOB decision */ + for (;;) { + if ((v = (*block)[natural_order[++k]]) >= 0) { + if (v >>= cinfo->Al) { + if (v >> 1) /* previously nonzero coef */ + arith_encode(cinfo, st + 2, (v & 1)); + else { /* newly nonzero coef */ + arith_encode(cinfo, st + 1, 1); + arith_encode(cinfo, entropy->fixed_bin, 0); + } + break; + } + } else { + v = -v; + if (v >>= cinfo->Al) { + if (v >> 1) /* previously nonzero coef */ + arith_encode(cinfo, st + 2, (v & 1)); + else { /* newly nonzero coef */ + arith_encode(cinfo, st + 1, 1); + arith_encode(cinfo, entropy->fixed_bin, 1); + } + break; + } + } + arith_encode(cinfo, st + 1, 0); + st += 3; + } + } + /* Encode EOB decision only if k < cinfo->Se */ + if (k < cinfo->Se) { + st = entropy->ac_stats[tbl] + 3 * k; + arith_encode(cinfo, st, 1); + } + + return TRUE; +} + + +/* + * Encode and output one MCU's worth of arithmetic-compressed coefficients. + */ + +METHODDEF(boolean) +encode_mcu (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + const int * natural_order; + JBLOCKROW block; + unsigned char *st; + int tbl, k, ke; + int v, v2, m; + int blkn, ci; + jpeg_component_info * compptr; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + emit_restart(cinfo, entropy->next_restart_num); + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + natural_order = cinfo->natural_order; + + /* Encode the MCU data blocks */ + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + block = MCU_data[blkn]; + ci = cinfo->MCU_membership[blkn]; + compptr = cinfo->cur_comp_info[ci]; + + /* Sections F.1.4.1 & F.1.4.4.1: Encoding of DC coefficients */ + + tbl = compptr->dc_tbl_no; + + /* Table F.4: Point to statistics bin S0 for DC coefficient coding */ + st = entropy->dc_stats[tbl] + entropy->dc_context[ci]; + + /* Figure F.4: Encode_DC_DIFF */ + if ((v = (*block)[0] - entropy->last_dc_val[ci]) == 0) { + arith_encode(cinfo, st, 0); + entropy->dc_context[ci] = 0; /* zero diff category */ + } else { + entropy->last_dc_val[ci] = (*block)[0]; + arith_encode(cinfo, st, 1); + /* Figure F.6: Encoding nonzero value v */ + /* Figure F.7: Encoding the sign of v */ + if (v > 0) { + arith_encode(cinfo, st + 1, 0); /* Table F.4: SS = S0 + 1 */ + st += 2; /* Table F.4: SP = S0 + 2 */ + entropy->dc_context[ci] = 4; /* small positive diff category */ + } else { + v = -v; + arith_encode(cinfo, st + 1, 1); /* Table F.4: SS = S0 + 1 */ + st += 3; /* Table F.4: SN = S0 + 3 */ + entropy->dc_context[ci] = 8; /* small negative diff category */ + } + /* Figure F.8: Encoding the magnitude category of v */ + m = 0; + if (v -= 1) { + arith_encode(cinfo, st, 1); + m = 1; + v2 = v; + st = entropy->dc_stats[tbl] + 20; /* Table F.4: X1 = 20 */ + while (v2 >>= 1) { + arith_encode(cinfo, st, 1); + m <<= 1; + st += 1; + } + } + arith_encode(cinfo, st, 0); + /* Section F.1.4.4.1.2: Establish dc_context conditioning category */ + if (m < (int) ((1L << cinfo->arith_dc_L[tbl]) >> 1)) + entropy->dc_context[ci] = 0; /* zero diff category */ + else if (m > (int) ((1L << cinfo->arith_dc_U[tbl]) >> 1)) + entropy->dc_context[ci] += 8; /* large diff category */ + /* Figure F.9: Encoding the magnitude bit pattern of v */ + st += 14; + while (m >>= 1) + arith_encode(cinfo, st, (m & v) ? 1 : 0); + } + + /* Sections F.1.4.2 & F.1.4.4.2: Encoding of AC coefficients */ + + if ((ke = cinfo->lim_Se) == 0) continue; + tbl = compptr->ac_tbl_no; + + /* Establish EOB (end-of-block) index */ + do { + if ((*block)[natural_order[ke]]) break; + } while (--ke); + + /* Figure F.5: Encode_AC_Coefficients */ + for (k = 0; k < ke;) { + st = entropy->ac_stats[tbl] + 3 * k; + arith_encode(cinfo, st, 0); /* EOB decision */ + while ((v = (*block)[natural_order[++k]]) == 0) { + arith_encode(cinfo, st + 1, 0); + st += 3; + } + arith_encode(cinfo, st + 1, 1); + /* Figure F.6: Encoding nonzero value v */ + /* Figure F.7: Encoding the sign of v */ + if (v > 0) { + arith_encode(cinfo, entropy->fixed_bin, 0); + } else { + v = -v; + arith_encode(cinfo, entropy->fixed_bin, 1); + } + st += 2; + /* Figure F.8: Encoding the magnitude category of v */ + m = 0; + if (v -= 1) { + arith_encode(cinfo, st, 1); + m = 1; + v2 = v; + if (v2 >>= 1) { + arith_encode(cinfo, st, 1); + m <<= 1; + st = entropy->ac_stats[tbl] + + (k <= cinfo->arith_ac_K[tbl] ? 189 : 217); + while (v2 >>= 1) { + arith_encode(cinfo, st, 1); + m <<= 1; + st += 1; + } + } + } + arith_encode(cinfo, st, 0); + /* Figure F.9: Encoding the magnitude bit pattern of v */ + st += 14; + while (m >>= 1) + arith_encode(cinfo, st, (m & v) ? 1 : 0); + } + /* Encode EOB decision only if k < cinfo->lim_Se */ + if (k < cinfo->lim_Se) { + st = entropy->ac_stats[tbl] + 3 * k; + arith_encode(cinfo, st, 1); + } + } + + return TRUE; +} + + +/* + * Initialize for an arithmetic-compressed scan. + */ + +METHODDEF(void) +start_pass (j_compress_ptr cinfo, boolean gather_statistics) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + int ci, tbl; + jpeg_component_info * compptr; + + if (gather_statistics) + /* Make sure to avoid that in the master control logic! + * We are fully adaptive here and need no extra + * statistics gathering pass! + */ + ERREXIT(cinfo, JERR_NOT_COMPILED); + + /* We assume jcmaster.c already validated the progressive scan parameters. */ + + /* Select execution routines */ + if (cinfo->progressive_mode) { + if (cinfo->Ah == 0) { + if (cinfo->Ss == 0) + entropy->pub.encode_mcu = encode_mcu_DC_first; + else + entropy->pub.encode_mcu = encode_mcu_AC_first; + } else { + if (cinfo->Ss == 0) + entropy->pub.encode_mcu = encode_mcu_DC_refine; + else + entropy->pub.encode_mcu = encode_mcu_AC_refine; + } + } else + entropy->pub.encode_mcu = encode_mcu; + + /* Allocate & initialize requested statistics areas */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* DC needs no table for refinement scan */ + if (cinfo->Ss == 0 && cinfo->Ah == 0) { + tbl = compptr->dc_tbl_no; + if (tbl < 0 || tbl >= NUM_ARITH_TBLS) + ERREXIT1(cinfo, JERR_NO_ARITH_TABLE, tbl); + if (entropy->dc_stats[tbl] == NULL) + entropy->dc_stats[tbl] = (unsigned char *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, DC_STAT_BINS); + MEMZERO(entropy->dc_stats[tbl], DC_STAT_BINS); + /* Initialize DC predictions to 0 */ + entropy->last_dc_val[ci] = 0; + entropy->dc_context[ci] = 0; + } + /* AC needs no table when not present */ + if (cinfo->Se) { + tbl = compptr->ac_tbl_no; + if (tbl < 0 || tbl >= NUM_ARITH_TBLS) + ERREXIT1(cinfo, JERR_NO_ARITH_TABLE, tbl); + if (entropy->ac_stats[tbl] == NULL) + entropy->ac_stats[tbl] = (unsigned char *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, AC_STAT_BINS); + MEMZERO(entropy->ac_stats[tbl], AC_STAT_BINS); +#ifdef CALCULATE_SPECTRAL_CONDITIONING + if (cinfo->progressive_mode) + /* Section G.1.3.2: Set appropriate arithmetic conditioning value Kx */ + cinfo->arith_ac_K[tbl] = cinfo->Ss + ((8 + cinfo->Se - cinfo->Ss) >> 4); +#endif + } + } + + /* Initialize arithmetic encoding variables */ + entropy->c = 0; + entropy->a = 0x10000L; + entropy->sc = 0; + entropy->zc = 0; + entropy->ct = 11; + entropy->buffer = -1; /* empty */ + + /* Initialize restart stuff */ + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num = 0; +} + + +/* + * Module initialization routine for arithmetic entropy encoding. + */ + +GLOBAL(void) +jinit_arith_encoder (j_compress_ptr cinfo) +{ + arith_entropy_ptr entropy; + int i; + + entropy = (arith_entropy_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(arith_entropy_encoder)); + cinfo->entropy = &entropy->pub; + entropy->pub.start_pass = start_pass; + entropy->pub.finish_pass = finish_pass; + + /* Mark tables unallocated */ + for (i = 0; i < NUM_ARITH_TBLS; i++) { + entropy->dc_stats[i] = NULL; + entropy->ac_stats[i] = NULL; + } + + /* Initialize index for fixed probability estimation */ + entropy->fixed_bin[0] = 113; +} diff --git a/compat/libjpeg/jccoefct.c b/compat/libjpeg/jccoefct.c new file mode 100755 index 0000000..b64b46e --- /dev/null +++ b/compat/libjpeg/jccoefct.c @@ -0,0 +1,454 @@ +/* + * jccoefct.c + * + * Copyright (C) 1994-1997, Thomas G. Lane. + * Modified 2003-2011 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the coefficient buffer controller for compression. + * This controller is the top level of the JPEG compressor proper. + * The coefficient buffer lies between forward-DCT and entropy encoding steps. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* We use a full-image coefficient buffer when doing Huffman optimization, + * and also for writing multiple-scan JPEG files. In all cases, the DCT + * step is run during the first pass, and subsequent passes need only read + * the buffered coefficients. + */ +#ifdef ENTROPY_OPT_SUPPORTED +#define FULL_COEF_BUFFER_SUPPORTED +#else +#ifdef C_MULTISCAN_FILES_SUPPORTED +#define FULL_COEF_BUFFER_SUPPORTED +#endif +#endif + + +/* Private buffer controller object */ + +typedef struct { + struct jpeg_c_coef_controller pub; /* public fields */ + + JDIMENSION iMCU_row_num; /* iMCU row # within image */ + JDIMENSION mcu_ctr; /* counts MCUs processed in current row */ + int MCU_vert_offset; /* counts MCU rows within iMCU row */ + int MCU_rows_per_iMCU_row; /* number of such rows needed */ + + /* For single-pass compression, it's sufficient to buffer just one MCU + * (although this may prove a bit slow in practice). We allocate a + * workspace of C_MAX_BLOCKS_IN_MCU coefficient blocks, and reuse it for each + * MCU constructed and sent. (On 80x86, the workspace is FAR even though + * it's not really very big; this is to keep the module interfaces unchanged + * when a large coefficient buffer is necessary.) + * In multi-pass modes, this array points to the current MCU's blocks + * within the virtual arrays. + */ + JBLOCKROW MCU_buffer[C_MAX_BLOCKS_IN_MCU]; + + /* In multi-pass modes, we need a virtual block array for each component. */ + jvirt_barray_ptr whole_image[MAX_COMPONENTS]; +} my_coef_controller; + +typedef my_coef_controller * my_coef_ptr; + + +/* Forward declarations */ +METHODDEF(boolean) compress_data + JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf)); +#ifdef FULL_COEF_BUFFER_SUPPORTED +METHODDEF(boolean) compress_first_pass + JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf)); +METHODDEF(boolean) compress_output + JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf)); +#endif + + +LOCAL(void) +start_iMCU_row (j_compress_ptr cinfo) +/* Reset within-iMCU-row counters for a new row */ +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + + /* In an interleaved scan, an MCU row is the same as an iMCU row. + * In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows. + * But at the bottom of the image, process only what's left. + */ + if (cinfo->comps_in_scan > 1) { + coef->MCU_rows_per_iMCU_row = 1; + } else { + if (coef->iMCU_row_num < (cinfo->total_iMCU_rows-1)) + coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor; + else + coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height; + } + + coef->mcu_ctr = 0; + coef->MCU_vert_offset = 0; +} + + +/* + * Initialize for a processing pass. + */ + +METHODDEF(void) +start_pass_coef (j_compress_ptr cinfo, J_BUF_MODE pass_mode) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + + coef->iMCU_row_num = 0; + start_iMCU_row(cinfo); + + switch (pass_mode) { + case JBUF_PASS_THRU: + if (coef->whole_image[0] != NULL) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + coef->pub.compress_data = compress_data; + break; +#ifdef FULL_COEF_BUFFER_SUPPORTED + case JBUF_SAVE_AND_PASS: + if (coef->whole_image[0] == NULL) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + coef->pub.compress_data = compress_first_pass; + break; + case JBUF_CRANK_DEST: + if (coef->whole_image[0] == NULL) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + coef->pub.compress_data = compress_output; + break; +#endif + default: + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + break; + } +} + + +/* + * Process some data in the single-pass case. + * We process the equivalent of one fully interleaved MCU row ("iMCU" row) + * per call, ie, v_samp_factor block rows for each component in the image. + * Returns TRUE if the iMCU row is completed, FALSE if suspended. + * + * NB: input_buf contains a plane for each component in image, + * which we index according to the component's SOF position. + */ + +METHODDEF(boolean) +compress_data (j_compress_ptr cinfo, JSAMPIMAGE input_buf) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + JDIMENSION MCU_col_num; /* index of current MCU within row */ + JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1; + JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; + int blkn, bi, ci, yindex, yoffset, blockcnt; + JDIMENSION ypos, xpos; + jpeg_component_info *compptr; + forward_DCT_ptr forward_DCT; + + /* Loop to write as much as one whole iMCU row */ + for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; + yoffset++) { + for (MCU_col_num = coef->mcu_ctr; MCU_col_num <= last_MCU_col; + MCU_col_num++) { + /* Determine where data comes from in input_buf and do the DCT thing. + * Each call on forward_DCT processes a horizontal row of DCT blocks + * as wide as an MCU; we rely on having allocated the MCU_buffer[] blocks + * sequentially. Dummy blocks at the right or bottom edge are filled in + * specially. The data in them does not matter for image reconstruction, + * so we fill them with values that will encode to the smallest amount of + * data, viz: all zeroes in the AC entries, DC entries equal to previous + * block's DC value. (Thanks to Thomas Kinsman for this idea.) + */ + blkn = 0; + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + forward_DCT = cinfo->fdct->forward_DCT[compptr->component_index]; + blockcnt = (MCU_col_num < last_MCU_col) ? compptr->MCU_width + : compptr->last_col_width; + xpos = MCU_col_num * compptr->MCU_sample_width; + ypos = yoffset * compptr->DCT_v_scaled_size; + /* ypos == (yoffset+yindex) * DCTSIZE */ + for (yindex = 0; yindex < compptr->MCU_height; yindex++) { + if (coef->iMCU_row_num < last_iMCU_row || + yoffset+yindex < compptr->last_row_height) { + (*forward_DCT) (cinfo, compptr, + input_buf[compptr->component_index], + coef->MCU_buffer[blkn], + ypos, xpos, (JDIMENSION) blockcnt); + if (blockcnt < compptr->MCU_width) { + /* Create some dummy blocks at the right edge of the image. */ + FMEMZERO((void FAR *) coef->MCU_buffer[blkn + blockcnt], + (compptr->MCU_width - blockcnt) * SIZEOF(JBLOCK)); + for (bi = blockcnt; bi < compptr->MCU_width; bi++) { + coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn+bi-1][0][0]; + } + } + } else { + /* Create a row of dummy blocks at the bottom of the image. */ + FMEMZERO((void FAR *) coef->MCU_buffer[blkn], + compptr->MCU_width * SIZEOF(JBLOCK)); + for (bi = 0; bi < compptr->MCU_width; bi++) { + coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn-1][0][0]; + } + } + blkn += compptr->MCU_width; + ypos += compptr->DCT_v_scaled_size; + } + } + /* Try to write the MCU. In event of a suspension failure, we will + * re-DCT the MCU on restart (a bit inefficient, could be fixed...) + */ + if (! (*cinfo->entropy->encode_mcu) (cinfo, coef->MCU_buffer)) { + /* Suspension forced; update state counters and exit */ + coef->MCU_vert_offset = yoffset; + coef->mcu_ctr = MCU_col_num; + return FALSE; + } + } + /* Completed an MCU row, but perhaps not an iMCU row */ + coef->mcu_ctr = 0; + } + /* Completed the iMCU row, advance counters for next one */ + coef->iMCU_row_num++; + start_iMCU_row(cinfo); + return TRUE; +} + + +#ifdef FULL_COEF_BUFFER_SUPPORTED + +/* + * Process some data in the first pass of a multi-pass case. + * We process the equivalent of one fully interleaved MCU row ("iMCU" row) + * per call, ie, v_samp_factor block rows for each component in the image. + * This amount of data is read from the source buffer, DCT'd and quantized, + * and saved into the virtual arrays. We also generate suitable dummy blocks + * as needed at the right and lower edges. (The dummy blocks are constructed + * in the virtual arrays, which have been padded appropriately.) This makes + * it possible for subsequent passes not to worry about real vs. dummy blocks. + * + * We must also emit the data to the entropy encoder. This is conveniently + * done by calling compress_output() after we've loaded the current strip + * of the virtual arrays. + * + * NB: input_buf contains a plane for each component in image. All + * components are DCT'd and loaded into the virtual arrays in this pass. + * However, it may be that only a subset of the components are emitted to + * the entropy encoder during this first pass; be careful about looking + * at the scan-dependent variables (MCU dimensions, etc). + */ + +METHODDEF(boolean) +compress_first_pass (j_compress_ptr cinfo, JSAMPIMAGE input_buf) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; + JDIMENSION blocks_across, MCUs_across, MCUindex; + int bi, ci, h_samp_factor, block_row, block_rows, ndummy; + JCOEF lastDC; + jpeg_component_info *compptr; + JBLOCKARRAY buffer; + JBLOCKROW thisblockrow, lastblockrow; + forward_DCT_ptr forward_DCT; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Align the virtual buffer for this component. */ + buffer = (*cinfo->mem->access_virt_barray) + ((j_common_ptr) cinfo, coef->whole_image[ci], + coef->iMCU_row_num * compptr->v_samp_factor, + (JDIMENSION) compptr->v_samp_factor, TRUE); + /* Count non-dummy DCT block rows in this iMCU row. */ + if (coef->iMCU_row_num < last_iMCU_row) + block_rows = compptr->v_samp_factor; + else { + /* NB: can't use last_row_height here, since may not be set! */ + block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor); + if (block_rows == 0) block_rows = compptr->v_samp_factor; + } + blocks_across = compptr->width_in_blocks; + h_samp_factor = compptr->h_samp_factor; + /* Count number of dummy blocks to be added at the right margin. */ + ndummy = (int) (blocks_across % h_samp_factor); + if (ndummy > 0) + ndummy = h_samp_factor - ndummy; + forward_DCT = cinfo->fdct->forward_DCT[ci]; + /* Perform DCT for all non-dummy blocks in this iMCU row. Each call + * on forward_DCT processes a complete horizontal row of DCT blocks. + */ + for (block_row = 0; block_row < block_rows; block_row++) { + thisblockrow = buffer[block_row]; + (*forward_DCT) (cinfo, compptr, input_buf[ci], thisblockrow, + (JDIMENSION) (block_row * compptr->DCT_v_scaled_size), + (JDIMENSION) 0, blocks_across); + if (ndummy > 0) { + /* Create dummy blocks at the right edge of the image. */ + thisblockrow += blocks_across; /* => first dummy block */ + FMEMZERO((void FAR *) thisblockrow, ndummy * SIZEOF(JBLOCK)); + lastDC = thisblockrow[-1][0]; + for (bi = 0; bi < ndummy; bi++) { + thisblockrow[bi][0] = lastDC; + } + } + } + /* If at end of image, create dummy block rows as needed. + * The tricky part here is that within each MCU, we want the DC values + * of the dummy blocks to match the last real block's DC value. + * This squeezes a few more bytes out of the resulting file... + */ + if (coef->iMCU_row_num == last_iMCU_row) { + blocks_across += ndummy; /* include lower right corner */ + MCUs_across = blocks_across / h_samp_factor; + for (block_row = block_rows; block_row < compptr->v_samp_factor; + block_row++) { + thisblockrow = buffer[block_row]; + lastblockrow = buffer[block_row-1]; + FMEMZERO((void FAR *) thisblockrow, + (size_t) (blocks_across * SIZEOF(JBLOCK))); + for (MCUindex = 0; MCUindex < MCUs_across; MCUindex++) { + lastDC = lastblockrow[h_samp_factor-1][0]; + for (bi = 0; bi < h_samp_factor; bi++) { + thisblockrow[bi][0] = lastDC; + } + thisblockrow += h_samp_factor; /* advance to next MCU in row */ + lastblockrow += h_samp_factor; + } + } + } + } + /* NB: compress_output will increment iMCU_row_num if successful. + * A suspension return will result in redoing all the work above next time. + */ + + /* Emit data to the entropy encoder, sharing code with subsequent passes */ + return compress_output(cinfo, input_buf); +} + + +/* + * Process some data in subsequent passes of a multi-pass case. + * We process the equivalent of one fully interleaved MCU row ("iMCU" row) + * per call, ie, v_samp_factor block rows for each component in the scan. + * The data is obtained from the virtual arrays and fed to the entropy coder. + * Returns TRUE if the iMCU row is completed, FALSE if suspended. + * + * NB: input_buf is ignored; it is likely to be a NULL pointer. + */ + +METHODDEF(boolean) +compress_output (j_compress_ptr cinfo, JSAMPIMAGE input_buf) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + JDIMENSION MCU_col_num; /* index of current MCU within row */ + int blkn, ci, xindex, yindex, yoffset; + JDIMENSION start_col; + JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN]; + JBLOCKROW buffer_ptr; + jpeg_component_info *compptr; + + /* Align the virtual buffers for the components used in this scan. + * NB: during first pass, this is safe only because the buffers will + * already be aligned properly, so jmemmgr.c won't need to do any I/O. + */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + buffer[ci] = (*cinfo->mem->access_virt_barray) + ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index], + coef->iMCU_row_num * compptr->v_samp_factor, + (JDIMENSION) compptr->v_samp_factor, FALSE); + } + + /* Loop to process one whole iMCU row */ + for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; + yoffset++) { + for (MCU_col_num = coef->mcu_ctr; MCU_col_num < cinfo->MCUs_per_row; + MCU_col_num++) { + /* Construct list of pointers to DCT blocks belonging to this MCU */ + blkn = 0; /* index of current DCT block within MCU */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + start_col = MCU_col_num * compptr->MCU_width; + for (yindex = 0; yindex < compptr->MCU_height; yindex++) { + buffer_ptr = buffer[ci][yindex+yoffset] + start_col; + for (xindex = 0; xindex < compptr->MCU_width; xindex++) { + coef->MCU_buffer[blkn++] = buffer_ptr++; + } + } + } + /* Try to write the MCU. */ + if (! (*cinfo->entropy->encode_mcu) (cinfo, coef->MCU_buffer)) { + /* Suspension forced; update state counters and exit */ + coef->MCU_vert_offset = yoffset; + coef->mcu_ctr = MCU_col_num; + return FALSE; + } + } + /* Completed an MCU row, but perhaps not an iMCU row */ + coef->mcu_ctr = 0; + } + /* Completed the iMCU row, advance counters for next one */ + coef->iMCU_row_num++; + start_iMCU_row(cinfo); + return TRUE; +} + +#endif /* FULL_COEF_BUFFER_SUPPORTED */ + + +/* + * Initialize coefficient buffer controller. + */ + +GLOBAL(void) +jinit_c_coef_controller (j_compress_ptr cinfo, boolean need_full_buffer) +{ + my_coef_ptr coef; + + coef = (my_coef_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_coef_controller)); + cinfo->coef = (struct jpeg_c_coef_controller *) coef; + coef->pub.start_pass = start_pass_coef; + + /* Create the coefficient buffer. */ + if (need_full_buffer) { +#ifdef FULL_COEF_BUFFER_SUPPORTED + /* Allocate a full-image virtual array for each component, */ + /* padded to a multiple of samp_factor DCT blocks in each direction. */ + int ci; + jpeg_component_info *compptr; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + coef->whole_image[ci] = (*cinfo->mem->request_virt_barray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, + (JDIMENSION) jround_up((long) compptr->width_in_blocks, + (long) compptr->h_samp_factor), + (JDIMENSION) jround_up((long) compptr->height_in_blocks, + (long) compptr->v_samp_factor), + (JDIMENSION) compptr->v_samp_factor); + } +#else + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); +#endif + } else { + /* We only need a single-MCU buffer. */ + JBLOCKROW buffer; + int i; + + buffer = (JBLOCKROW) + (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, + C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)); + for (i = 0; i < C_MAX_BLOCKS_IN_MCU; i++) { + coef->MCU_buffer[i] = buffer + i; + } + coef->whole_image[0] = NULL; /* flag for no virtual arrays */ + } +} diff --git a/compat/libjpeg/jccolor.c b/compat/libjpeg/jccolor.c new file mode 100755 index 0000000..aac5802 --- /dev/null +++ b/compat/libjpeg/jccolor.c @@ -0,0 +1,604 @@ +/* + * jccolor.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * Modified 2011-2013 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains input colorspace conversion routines. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Private subobject */ + +typedef struct { + struct jpeg_color_converter pub; /* public fields */ + + /* Private state for RGB->YCC conversion */ + INT32 * rgb_ycc_tab; /* => table for RGB to YCbCr conversion */ +} my_color_converter; + +typedef my_color_converter * my_cconvert_ptr; + + +/**************** RGB -> YCbCr conversion: most common case **************/ + +/* + * YCbCr is defined per Recommendation ITU-R BT.601-7 (03/2011), + * previously known as Recommendation CCIR 601-1, except that Cb and Cr + * are normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5. + * sRGB (standard RGB color space) is defined per IEC 61966-2-1:1999. + * sYCC (standard luma-chroma-chroma color space with extended gamut) + * is defined per IEC 61966-2-1:1999 Amendment A1:2003 Annex F. + * bg-sRGB and bg-sYCC (big gamut standard color spaces) + * are defined per IEC 61966-2-1:1999 Amendment A1:2003 Annex G. + * Note that the derived conversion coefficients given in some of these + * documents are imprecise. The general conversion equations are + * Y = Kr * R + (1 - Kr - Kb) * G + Kb * B + * Cb = 0.5 * (B - Y) / (1 - Kb) + * Cr = 0.5 * (R - Y) / (1 - Kr) + * With Kr = 0.299 and Kb = 0.114 (derived according to SMPTE RP 177-1993 + * from the 1953 FCC NTSC primaries and CIE Illuminant C), + * the conversion equations to be implemented are therefore + * Y = 0.299 * R + 0.587 * G + 0.114 * B + * Cb = -0.168735892 * R - 0.331264108 * G + 0.5 * B + CENTERJSAMPLE + * Cr = 0.5 * R - 0.418687589 * G - 0.081312411 * B + CENTERJSAMPLE + * Note: older versions of the IJG code used a zero offset of MAXJSAMPLE/2, + * rather than CENTERJSAMPLE, for Cb and Cr. This gave equal positive and + * negative swings for Cb/Cr, but meant that grayscale values (Cb=Cr=0) + * were not represented exactly. Now we sacrifice exact representation of + * maximum red and maximum blue in order to get exact grayscales. + * + * To avoid floating-point arithmetic, we represent the fractional constants + * as integers scaled up by 2^16 (about 4 digits precision); we have to divide + * the products by 2^16, with appropriate rounding, to get the correct answer. + * + * For even more speed, we avoid doing any multiplications in the inner loop + * by precalculating the constants times R,G,B for all possible values. + * For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table); + * for 9-bit to 12-bit samples it is still acceptable. It's not very + * reasonable for 16-bit samples, but if you want lossless storage you + * shouldn't be changing colorspace anyway. + * The CENTERJSAMPLE offsets and the rounding fudge-factor of 0.5 are included + * in the tables to save adding them separately in the inner loop. + */ + +#define SCALEBITS 16 /* speediest right-shift on some machines */ +#define CBCR_OFFSET ((INT32) CENTERJSAMPLE << SCALEBITS) +#define ONE_HALF ((INT32) 1 << (SCALEBITS-1)) +#define FIX(x) ((INT32) ((x) * (1L< Y section */ +#define G_Y_OFF (1*(MAXJSAMPLE+1)) /* offset to G => Y section */ +#define B_Y_OFF (2*(MAXJSAMPLE+1)) /* etc. */ +#define R_CB_OFF (3*(MAXJSAMPLE+1)) +#define G_CB_OFF (4*(MAXJSAMPLE+1)) +#define B_CB_OFF (5*(MAXJSAMPLE+1)) +#define R_CR_OFF B_CB_OFF /* B=>Cb, R=>Cr are the same */ +#define G_CR_OFF (6*(MAXJSAMPLE+1)) +#define B_CR_OFF (7*(MAXJSAMPLE+1)) +#define TABLE_SIZE (8*(MAXJSAMPLE+1)) + + +/* + * Initialize for RGB->YCC colorspace conversion. + */ + +METHODDEF(void) +rgb_ycc_start (j_compress_ptr cinfo) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + INT32 * rgb_ycc_tab; + INT32 i; + + /* Allocate and fill in the conversion tables. */ + cconvert->rgb_ycc_tab = rgb_ycc_tab = (INT32 *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (TABLE_SIZE * SIZEOF(INT32))); + + for (i = 0; i <= MAXJSAMPLE; i++) { + rgb_ycc_tab[i+R_Y_OFF] = FIX(0.299) * i; + rgb_ycc_tab[i+G_Y_OFF] = FIX(0.587) * i; + rgb_ycc_tab[i+B_Y_OFF] = FIX(0.114) * i + ONE_HALF; + rgb_ycc_tab[i+R_CB_OFF] = (-FIX(0.168735892)) * i; + rgb_ycc_tab[i+G_CB_OFF] = (-FIX(0.331264108)) * i; + /* We use a rounding fudge-factor of 0.5-epsilon for Cb and Cr. + * This ensures that the maximum output will round to MAXJSAMPLE + * not MAXJSAMPLE+1, and thus that we don't have to range-limit. + */ + rgb_ycc_tab[i+B_CB_OFF] = FIX(0.5) * i + CBCR_OFFSET + ONE_HALF-1; +/* B=>Cb and R=>Cr tables are the same + rgb_ycc_tab[i+R_CR_OFF] = FIX(0.5) * i + CBCR_OFFSET + ONE_HALF-1; +*/ + rgb_ycc_tab[i+G_CR_OFF] = (-FIX(0.418687589)) * i; + rgb_ycc_tab[i+B_CR_OFF] = (-FIX(0.081312411)) * i; + } +} + + +/* + * Convert some rows of samples to the JPEG colorspace. + * + * Note that we change from the application's interleaved-pixel format + * to our internal noninterleaved, one-plane-per-component format. + * The input buffer is therefore three times as wide as the output buffer. + * + * A starting row offset is provided only for the output buffer. The caller + * can easily adjust the passed input_buf value to accommodate any row + * offset required on that side. + */ + +METHODDEF(void) +rgb_ycc_convert (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPIMAGE output_buf, + JDIMENSION output_row, int num_rows) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + register INT32 * ctab = cconvert->rgb_ycc_tab; + register int r, g, b; + register JSAMPROW inptr; + register JSAMPROW outptr0, outptr1, outptr2; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->image_width; + + while (--num_rows >= 0) { + inptr = *input_buf++; + outptr0 = output_buf[0][output_row]; + outptr1 = output_buf[1][output_row]; + outptr2 = output_buf[2][output_row]; + output_row++; + for (col = 0; col < num_cols; col++) { + r = GETJSAMPLE(inptr[RGB_RED]); + g = GETJSAMPLE(inptr[RGB_GREEN]); + b = GETJSAMPLE(inptr[RGB_BLUE]); + /* If the inputs are 0..MAXJSAMPLE, the outputs of these equations + * must be too; we do not need an explicit range-limiting operation. + * Hence the value being shifted is never negative, and we don't + * need the general RIGHT_SHIFT macro. + */ + /* Y */ + outptr0[col] = (JSAMPLE) + ((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF]) + >> SCALEBITS); + /* Cb */ + outptr1[col] = (JSAMPLE) + ((ctab[r+R_CB_OFF] + ctab[g+G_CB_OFF] + ctab[b+B_CB_OFF]) + >> SCALEBITS); + /* Cr */ + outptr2[col] = (JSAMPLE) + ((ctab[r+R_CR_OFF] + ctab[g+G_CR_OFF] + ctab[b+B_CR_OFF]) + >> SCALEBITS); + inptr += RGB_PIXELSIZE; + } + } +} + + +/**************** Cases other than RGB -> YCbCr **************/ + + +/* + * Convert some rows of samples to the JPEG colorspace. + * This version handles RGB->grayscale conversion, which is the same + * as the RGB->Y portion of RGB->YCbCr. + * We assume rgb_ycc_start has been called (we only use the Y tables). + */ + +METHODDEF(void) +rgb_gray_convert (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPIMAGE output_buf, + JDIMENSION output_row, int num_rows) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + register INT32 * ctab = cconvert->rgb_ycc_tab; + register int r, g, b; + register JSAMPROW inptr; + register JSAMPROW outptr; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->image_width; + + while (--num_rows >= 0) { + inptr = *input_buf++; + outptr = output_buf[0][output_row++]; + for (col = 0; col < num_cols; col++) { + r = GETJSAMPLE(inptr[RGB_RED]); + g = GETJSAMPLE(inptr[RGB_GREEN]); + b = GETJSAMPLE(inptr[RGB_BLUE]); + /* Y */ + outptr[col] = (JSAMPLE) + ((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF]) + >> SCALEBITS); + inptr += RGB_PIXELSIZE; + } + } +} + + +/* + * Convert some rows of samples to the JPEG colorspace. + * This version handles Adobe-style CMYK->YCCK conversion, + * where we convert R=1-C, G=1-M, and B=1-Y to YCbCr using the same + * conversion as above, while passing K (black) unchanged. + * We assume rgb_ycc_start has been called. + */ + +METHODDEF(void) +cmyk_ycck_convert (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPIMAGE output_buf, + JDIMENSION output_row, int num_rows) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + register INT32 * ctab = cconvert->rgb_ycc_tab; + register int r, g, b; + register JSAMPROW inptr; + register JSAMPROW outptr0, outptr1, outptr2, outptr3; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->image_width; + + while (--num_rows >= 0) { + inptr = *input_buf++; + outptr0 = output_buf[0][output_row]; + outptr1 = output_buf[1][output_row]; + outptr2 = output_buf[2][output_row]; + outptr3 = output_buf[3][output_row]; + output_row++; + for (col = 0; col < num_cols; col++) { + r = MAXJSAMPLE - GETJSAMPLE(inptr[0]); + g = MAXJSAMPLE - GETJSAMPLE(inptr[1]); + b = MAXJSAMPLE - GETJSAMPLE(inptr[2]); + /* K passes through as-is */ + outptr3[col] = inptr[3]; /* don't need GETJSAMPLE here */ + /* If the inputs are 0..MAXJSAMPLE, the outputs of these equations + * must be too; we do not need an explicit range-limiting operation. + * Hence the value being shifted is never negative, and we don't + * need the general RIGHT_SHIFT macro. + */ + /* Y */ + outptr0[col] = (JSAMPLE) + ((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF]) + >> SCALEBITS); + /* Cb */ + outptr1[col] = (JSAMPLE) + ((ctab[r+R_CB_OFF] + ctab[g+G_CB_OFF] + ctab[b+B_CB_OFF]) + >> SCALEBITS); + /* Cr */ + outptr2[col] = (JSAMPLE) + ((ctab[r+R_CR_OFF] + ctab[g+G_CR_OFF] + ctab[b+B_CR_OFF]) + >> SCALEBITS); + inptr += 4; + } + } +} + + +/* + * Convert some rows of samples to the JPEG colorspace. + * [R,G,B] to [R-G,G,B-G] conversion with modulo calculation + * (forward reversible color transform). + * This can be seen as an adaption of the general RGB->YCbCr + * conversion equation with Kr = Kb = 0, while replacing the + * normalization by modulo calculation. + */ + +METHODDEF(void) +rgb_rgb1_convert (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPIMAGE output_buf, + JDIMENSION output_row, int num_rows) +{ + register int r, g, b; + register JSAMPROW inptr; + register JSAMPROW outptr0, outptr1, outptr2; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->image_width; + + while (--num_rows >= 0) { + inptr = *input_buf++; + outptr0 = output_buf[0][output_row]; + outptr1 = output_buf[1][output_row]; + outptr2 = output_buf[2][output_row]; + output_row++; + for (col = 0; col < num_cols; col++) { + r = GETJSAMPLE(inptr[RGB_RED]); + g = GETJSAMPLE(inptr[RGB_GREEN]); + b = GETJSAMPLE(inptr[RGB_BLUE]); + /* Assume that MAXJSAMPLE+1 is a power of 2, so that the MOD + * (modulo) operator is equivalent to the bitmask operator AND. + */ + outptr0[col] = (JSAMPLE) ((r - g + CENTERJSAMPLE) & MAXJSAMPLE); + outptr1[col] = (JSAMPLE) g; + outptr2[col] = (JSAMPLE) ((b - g + CENTERJSAMPLE) & MAXJSAMPLE); + inptr += RGB_PIXELSIZE; + } + } +} + + +/* + * Convert some rows of samples to the JPEG colorspace. + * This version handles grayscale output with no conversion. + * The source can be either plain grayscale or YCC (since Y == gray). + */ + +METHODDEF(void) +grayscale_convert (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPIMAGE output_buf, + JDIMENSION output_row, int num_rows) +{ + int instride = cinfo->input_components; + register JSAMPROW inptr; + register JSAMPROW outptr; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->image_width; + + while (--num_rows >= 0) { + inptr = *input_buf++; + outptr = output_buf[0][output_row++]; + for (col = 0; col < num_cols; col++) { + outptr[col] = inptr[0]; /* don't need GETJSAMPLE() here */ + inptr += instride; + } + } +} + + +/* + * Convert some rows of samples to the JPEG colorspace. + * No colorspace conversion, but change from interleaved + * to separate-planes representation. + */ + +METHODDEF(void) +rgb_convert (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPIMAGE output_buf, + JDIMENSION output_row, int num_rows) +{ + register JSAMPROW inptr; + register JSAMPROW outptr0, outptr1, outptr2; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->image_width; + + while (--num_rows >= 0) { + inptr = *input_buf++; + outptr0 = output_buf[0][output_row]; + outptr1 = output_buf[1][output_row]; + outptr2 = output_buf[2][output_row]; + output_row++; + for (col = 0; col < num_cols; col++) { + /* We can dispense with GETJSAMPLE() here */ + outptr0[col] = inptr[RGB_RED]; + outptr1[col] = inptr[RGB_GREEN]; + outptr2[col] = inptr[RGB_BLUE]; + inptr += RGB_PIXELSIZE; + } + } +} + + +/* + * Convert some rows of samples to the JPEG colorspace. + * This version handles multi-component colorspaces without conversion. + * We assume input_components == num_components. + */ + +METHODDEF(void) +null_convert (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPIMAGE output_buf, + JDIMENSION output_row, int num_rows) +{ + int ci; + register int nc = cinfo->num_components; + register JSAMPROW inptr; + register JSAMPROW outptr; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->image_width; + + while (--num_rows >= 0) { + /* It seems fastest to make a separate pass for each component. */ + for (ci = 0; ci < nc; ci++) { + inptr = input_buf[0] + ci; + outptr = output_buf[ci][output_row]; + for (col = 0; col < num_cols; col++) { + *outptr++ = *inptr; /* don't need GETJSAMPLE() here */ + inptr += nc; + } + } + input_buf++; + output_row++; + } +} + + +/* + * Empty method for start_pass. + */ + +METHODDEF(void) +null_method (j_compress_ptr cinfo) +{ + /* no work needed */ +} + + +/* + * Module initialization routine for input colorspace conversion. + */ + +GLOBAL(void) +jinit_color_converter (j_compress_ptr cinfo) +{ + my_cconvert_ptr cconvert; + + cconvert = (my_cconvert_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_color_converter)); + cinfo->cconvert = &cconvert->pub; + /* set start_pass to null method until we find out differently */ + cconvert->pub.start_pass = null_method; + + /* Make sure input_components agrees with in_color_space */ + switch (cinfo->in_color_space) { + case JCS_GRAYSCALE: + if (cinfo->input_components != 1) + ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); + break; + + case JCS_RGB: + case JCS_BG_RGB: + if (cinfo->input_components != RGB_PIXELSIZE) + ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); + break; + + case JCS_YCbCr: + case JCS_BG_YCC: + if (cinfo->input_components != 3) + ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); + break; + + case JCS_CMYK: + case JCS_YCCK: + if (cinfo->input_components != 4) + ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); + break; + + default: /* JCS_UNKNOWN can be anything */ + if (cinfo->input_components < 1) + ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); + break; + } + + /* Support color transform only for RGB colorspaces */ + if (cinfo->color_transform && + cinfo->jpeg_color_space != JCS_RGB && + cinfo->jpeg_color_space != JCS_BG_RGB) + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + + /* Check num_components, set conversion method based on requested space */ + switch (cinfo->jpeg_color_space) { + case JCS_GRAYSCALE: + if (cinfo->num_components != 1) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + switch (cinfo->in_color_space) { + case JCS_GRAYSCALE: + case JCS_YCbCr: + case JCS_BG_YCC: + cconvert->pub.color_convert = grayscale_convert; + break; + case JCS_RGB: + cconvert->pub.start_pass = rgb_ycc_start; + cconvert->pub.color_convert = rgb_gray_convert; + break; + default: + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + } + break; + + case JCS_RGB: + case JCS_BG_RGB: + if (cinfo->num_components != 3) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + if (cinfo->in_color_space == cinfo->jpeg_color_space) { + switch (cinfo->color_transform) { + case JCT_NONE: + cconvert->pub.color_convert = rgb_convert; + break; + case JCT_SUBTRACT_GREEN: + cconvert->pub.color_convert = rgb_rgb1_convert; + break; + default: + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + } + } else + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + + case JCS_YCbCr: + if (cinfo->num_components != 3) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + switch (cinfo->in_color_space) { + case JCS_RGB: + cconvert->pub.start_pass = rgb_ycc_start; + cconvert->pub.color_convert = rgb_ycc_convert; + break; + case JCS_YCbCr: + cconvert->pub.color_convert = null_convert; + break; + default: + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + } + break; + + case JCS_BG_YCC: + if (cinfo->num_components != 3) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + switch (cinfo->in_color_space) { + case JCS_RGB: + /* For conversion from normal RGB input to BG_YCC representation, + * the Cb/Cr values are first computed as usual, and then + * quantized further after DCT processing by a factor of + * 2 in reference to the nominal quantization factor. + */ + /* need quantization scale by factor of 2 after DCT */ + cinfo->comp_info[1].component_needed = TRUE; + cinfo->comp_info[2].component_needed = TRUE; + /* compute normal YCC first */ + cconvert->pub.start_pass = rgb_ycc_start; + cconvert->pub.color_convert = rgb_ycc_convert; + break; + case JCS_YCbCr: + /* need quantization scale by factor of 2 after DCT */ + cinfo->comp_info[1].component_needed = TRUE; + cinfo->comp_info[2].component_needed = TRUE; + /*FALLTHROUGH*/ + case JCS_BG_YCC: + /* Pass through for BG_YCC input */ + cconvert->pub.color_convert = null_convert; + break; + default: + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + } + break; + + case JCS_CMYK: + if (cinfo->num_components != 4) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + if (cinfo->in_color_space == JCS_CMYK) + cconvert->pub.color_convert = null_convert; + else + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + + case JCS_YCCK: + if (cinfo->num_components != 4) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + switch (cinfo->in_color_space) { + case JCS_CMYK: + cconvert->pub.start_pass = rgb_ycc_start; + cconvert->pub.color_convert = cmyk_ycck_convert; + break; + case JCS_YCCK: + cconvert->pub.color_convert = null_convert; + break; + default: + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + } + break; + + default: /* allow null conversion of JCS_UNKNOWN */ + if (cinfo->jpeg_color_space != cinfo->in_color_space || + cinfo->num_components != cinfo->input_components) + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + cconvert->pub.color_convert = null_convert; + break; + } +} diff --git a/compat/libjpeg/jcdctmgr.c b/compat/libjpeg/jcdctmgr.c new file mode 100755 index 0000000..9daea85 --- /dev/null +++ b/compat/libjpeg/jcdctmgr.c @@ -0,0 +1,477 @@ +/* + * jcdctmgr.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2003-2013 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the forward-DCT management logic. + * This code selects a particular DCT implementation to be used, + * and it performs related housekeeping chores including coefficient + * quantization. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + + +/* Private subobject for this module */ + +typedef struct { + struct jpeg_forward_dct pub; /* public fields */ + + /* Pointer to the DCT routine actually in use */ + forward_DCT_method_ptr do_dct[MAX_COMPONENTS]; + +#ifdef DCT_FLOAT_SUPPORTED + /* Same as above for the floating-point case. */ + float_DCT_method_ptr do_float_dct[MAX_COMPONENTS]; +#endif +} my_fdct_controller; + +typedef my_fdct_controller * my_fdct_ptr; + + +/* The allocated post-DCT divisor tables -- big enough for any + * supported variant and not identical to the quant table entries, + * because of scaling (especially for an unnormalized DCT) -- + * are pointed to by dct_table in the per-component comp_info + * structures. Each table is given in normal array order. + */ + +typedef union { + DCTELEM int_array[DCTSIZE2]; +#ifdef DCT_FLOAT_SUPPORTED + FAST_FLOAT float_array[DCTSIZE2]; +#endif +} divisor_table; + + +/* The current scaled-DCT routines require ISLOW-style divisor tables, + * so be sure to compile that code if either ISLOW or SCALING is requested. + */ +#ifdef DCT_ISLOW_SUPPORTED +#define PROVIDE_ISLOW_TABLES +#else +#ifdef DCT_SCALING_SUPPORTED +#define PROVIDE_ISLOW_TABLES +#endif +#endif + + +/* + * Perform forward DCT on one or more blocks of a component. + * + * The input samples are taken from the sample_data[] array starting at + * position start_row/start_col, and moving to the right for any additional + * blocks. The quantized coefficients are returned in coef_blocks[]. + */ + +METHODDEF(void) +forward_DCT (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY sample_data, JBLOCKROW coef_blocks, + JDIMENSION start_row, JDIMENSION start_col, + JDIMENSION num_blocks) +/* This version is used for integer DCT implementations. */ +{ + /* This routine is heavily used, so it's worth coding it tightly. */ + my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct; + forward_DCT_method_ptr do_dct = fdct->do_dct[compptr->component_index]; + DCTELEM * divisors = (DCTELEM *) compptr->dct_table; + DCTELEM workspace[DCTSIZE2]; /* work area for FDCT subroutine */ + JDIMENSION bi; + + sample_data += start_row; /* fold in the vertical offset once */ + + for (bi = 0; bi < num_blocks; bi++, start_col += compptr->DCT_h_scaled_size) { + /* Perform the DCT */ + (*do_dct) (workspace, sample_data, start_col); + + /* Quantize/descale the coefficients, and store into coef_blocks[] */ + { register DCTELEM temp, qval; + register int i; + register JCOEFPTR output_ptr = coef_blocks[bi]; + + for (i = 0; i < DCTSIZE2; i++) { + qval = divisors[i]; + temp = workspace[i]; + /* Divide the coefficient value by qval, ensuring proper rounding. + * Since C does not specify the direction of rounding for negative + * quotients, we have to force the dividend positive for portability. + * + * In most files, at least half of the output values will be zero + * (at default quantization settings, more like three-quarters...) + * so we should ensure that this case is fast. On many machines, + * a comparison is enough cheaper than a divide to make a special test + * a win. Since both inputs will be nonnegative, we need only test + * for a < b to discover whether a/b is 0. + * If your machine's division is fast enough, define FAST_DIVIDE. + */ +#ifdef FAST_DIVIDE +#define DIVIDE_BY(a,b) a /= b +#else +#define DIVIDE_BY(a,b) if (a >= b) a /= b; else a = 0 +#endif + if (temp < 0) { + temp = -temp; + temp += qval>>1; /* for rounding */ + DIVIDE_BY(temp, qval); + temp = -temp; + } else { + temp += qval>>1; /* for rounding */ + DIVIDE_BY(temp, qval); + } + output_ptr[i] = (JCOEF) temp; + } + } + } +} + + +#ifdef DCT_FLOAT_SUPPORTED + +METHODDEF(void) +forward_DCT_float (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY sample_data, JBLOCKROW coef_blocks, + JDIMENSION start_row, JDIMENSION start_col, + JDIMENSION num_blocks) +/* This version is used for floating-point DCT implementations. */ +{ + /* This routine is heavily used, so it's worth coding it tightly. */ + my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct; + float_DCT_method_ptr do_dct = fdct->do_float_dct[compptr->component_index]; + FAST_FLOAT * divisors = (FAST_FLOAT *) compptr->dct_table; + FAST_FLOAT workspace[DCTSIZE2]; /* work area for FDCT subroutine */ + JDIMENSION bi; + + sample_data += start_row; /* fold in the vertical offset once */ + + for (bi = 0; bi < num_blocks; bi++, start_col += compptr->DCT_h_scaled_size) { + /* Perform the DCT */ + (*do_dct) (workspace, sample_data, start_col); + + /* Quantize/descale the coefficients, and store into coef_blocks[] */ + { register FAST_FLOAT temp; + register int i; + register JCOEFPTR output_ptr = coef_blocks[bi]; + + for (i = 0; i < DCTSIZE2; i++) { + /* Apply the quantization and scaling factor */ + temp = workspace[i] * divisors[i]; + /* Round to nearest integer. + * Since C does not specify the direction of rounding for negative + * quotients, we have to force the dividend positive for portability. + * The maximum coefficient size is +-16K (for 12-bit data), so this + * code should work for either 16-bit or 32-bit ints. + */ + output_ptr[i] = (JCOEF) ((int) (temp + (FAST_FLOAT) 16384.5) - 16384); + } + } + } +} + +#endif /* DCT_FLOAT_SUPPORTED */ + + +/* + * Initialize for a processing pass. + * Verify that all referenced Q-tables are present, and set up + * the divisor table for each one. + * In the current implementation, DCT of all components is done during + * the first pass, even if only some components will be output in the + * first scan. Hence all components should be examined here. + */ + +METHODDEF(void) +start_pass_fdctmgr (j_compress_ptr cinfo) +{ + my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct; + int ci, qtblno, i; + jpeg_component_info *compptr; + int method = 0; + JQUANT_TBL * qtbl; + DCTELEM * dtbl; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Select the proper DCT routine for this component's scaling */ + switch ((compptr->DCT_h_scaled_size << 8) + compptr->DCT_v_scaled_size) { +#ifdef DCT_SCALING_SUPPORTED + case ((1 << 8) + 1): + fdct->do_dct[ci] = jpeg_fdct_1x1; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((2 << 8) + 2): + fdct->do_dct[ci] = jpeg_fdct_2x2; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((3 << 8) + 3): + fdct->do_dct[ci] = jpeg_fdct_3x3; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((4 << 8) + 4): + fdct->do_dct[ci] = jpeg_fdct_4x4; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((5 << 8) + 5): + fdct->do_dct[ci] = jpeg_fdct_5x5; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((6 << 8) + 6): + fdct->do_dct[ci] = jpeg_fdct_6x6; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((7 << 8) + 7): + fdct->do_dct[ci] = jpeg_fdct_7x7; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((9 << 8) + 9): + fdct->do_dct[ci] = jpeg_fdct_9x9; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((10 << 8) + 10): + fdct->do_dct[ci] = jpeg_fdct_10x10; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((11 << 8) + 11): + fdct->do_dct[ci] = jpeg_fdct_11x11; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((12 << 8) + 12): + fdct->do_dct[ci] = jpeg_fdct_12x12; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((13 << 8) + 13): + fdct->do_dct[ci] = jpeg_fdct_13x13; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((14 << 8) + 14): + fdct->do_dct[ci] = jpeg_fdct_14x14; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((15 << 8) + 15): + fdct->do_dct[ci] = jpeg_fdct_15x15; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((16 << 8) + 16): + fdct->do_dct[ci] = jpeg_fdct_16x16; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((16 << 8) + 8): + fdct->do_dct[ci] = jpeg_fdct_16x8; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((14 << 8) + 7): + fdct->do_dct[ci] = jpeg_fdct_14x7; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((12 << 8) + 6): + fdct->do_dct[ci] = jpeg_fdct_12x6; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((10 << 8) + 5): + fdct->do_dct[ci] = jpeg_fdct_10x5; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((8 << 8) + 4): + fdct->do_dct[ci] = jpeg_fdct_8x4; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((6 << 8) + 3): + fdct->do_dct[ci] = jpeg_fdct_6x3; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((4 << 8) + 2): + fdct->do_dct[ci] = jpeg_fdct_4x2; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((2 << 8) + 1): + fdct->do_dct[ci] = jpeg_fdct_2x1; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((8 << 8) + 16): + fdct->do_dct[ci] = jpeg_fdct_8x16; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((7 << 8) + 14): + fdct->do_dct[ci] = jpeg_fdct_7x14; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((6 << 8) + 12): + fdct->do_dct[ci] = jpeg_fdct_6x12; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((5 << 8) + 10): + fdct->do_dct[ci] = jpeg_fdct_5x10; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((4 << 8) + 8): + fdct->do_dct[ci] = jpeg_fdct_4x8; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((3 << 8) + 6): + fdct->do_dct[ci] = jpeg_fdct_3x6; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((2 << 8) + 4): + fdct->do_dct[ci] = jpeg_fdct_2x4; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((1 << 8) + 2): + fdct->do_dct[ci] = jpeg_fdct_1x2; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; +#endif + case ((DCTSIZE << 8) + DCTSIZE): + switch (cinfo->dct_method) { +#ifdef DCT_ISLOW_SUPPORTED + case JDCT_ISLOW: + fdct->do_dct[ci] = jpeg_fdct_islow; + method = JDCT_ISLOW; + break; +#endif +#ifdef DCT_IFAST_SUPPORTED + case JDCT_IFAST: + fdct->do_dct[ci] = jpeg_fdct_ifast; + method = JDCT_IFAST; + break; +#endif +#ifdef DCT_FLOAT_SUPPORTED + case JDCT_FLOAT: + fdct->do_float_dct[ci] = jpeg_fdct_float; + method = JDCT_FLOAT; + break; +#endif + default: + ERREXIT(cinfo, JERR_NOT_COMPILED); + break; + } + break; + default: + ERREXIT2(cinfo, JERR_BAD_DCTSIZE, + compptr->DCT_h_scaled_size, compptr->DCT_v_scaled_size); + break; + } + qtblno = compptr->quant_tbl_no; + /* Make sure specified quantization table is present */ + if (qtblno < 0 || qtblno >= NUM_QUANT_TBLS || + cinfo->quant_tbl_ptrs[qtblno] == NULL) + ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, qtblno); + qtbl = cinfo->quant_tbl_ptrs[qtblno]; + /* Create divisor table from quant table */ + switch (method) { +#ifdef PROVIDE_ISLOW_TABLES + case JDCT_ISLOW: + /* For LL&M IDCT method, divisors are equal to raw quantization + * coefficients multiplied by 8 (to counteract scaling). + */ + dtbl = (DCTELEM *) compptr->dct_table; + for (i = 0; i < DCTSIZE2; i++) { + dtbl[i] = + ((DCTELEM) qtbl->quantval[i]) << (compptr->component_needed ? 4 : 3); + } + fdct->pub.forward_DCT[ci] = forward_DCT; + break; +#endif +#ifdef DCT_IFAST_SUPPORTED + case JDCT_IFAST: + { + /* For AA&N IDCT method, divisors are equal to quantization + * coefficients scaled by scalefactor[row]*scalefactor[col], where + * scalefactor[0] = 1 + * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 + * We apply a further scale factor of 8. + */ +#define CONST_BITS 14 + static const INT16 aanscales[DCTSIZE2] = { + /* precomputed values scaled up by 14 bits */ + 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, + 22725, 31521, 29692, 26722, 22725, 17855, 12299, 6270, + 21407, 29692, 27969, 25172, 21407, 16819, 11585, 5906, + 19266, 26722, 25172, 22654, 19266, 15137, 10426, 5315, + 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, + 12873, 17855, 16819, 15137, 12873, 10114, 6967, 3552, + 8867, 12299, 11585, 10426, 8867, 6967, 4799, 2446, + 4520, 6270, 5906, 5315, 4520, 3552, 2446, 1247 + }; + SHIFT_TEMPS + + dtbl = (DCTELEM *) compptr->dct_table; + for (i = 0; i < DCTSIZE2; i++) { + dtbl[i] = (DCTELEM) + DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i], + (INT32) aanscales[i]), + compptr->component_needed ? CONST_BITS-4 : CONST_BITS-3); + } + } + fdct->pub.forward_DCT[ci] = forward_DCT; + break; +#endif +#ifdef DCT_FLOAT_SUPPORTED + case JDCT_FLOAT: + { + /* For float AA&N IDCT method, divisors are equal to quantization + * coefficients scaled by scalefactor[row]*scalefactor[col], where + * scalefactor[0] = 1 + * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 + * We apply a further scale factor of 8. + * What's actually stored is 1/divisor so that the inner loop can + * use a multiplication rather than a division. + */ + FAST_FLOAT * fdtbl = (FAST_FLOAT *) compptr->dct_table; + int row, col; + static const double aanscalefactor[DCTSIZE] = { + 1.0, 1.387039845, 1.306562965, 1.175875602, + 1.0, 0.785694958, 0.541196100, 0.275899379 + }; + + i = 0; + for (row = 0; row < DCTSIZE; row++) { + for (col = 0; col < DCTSIZE; col++) { + fdtbl[i] = (FAST_FLOAT) + (1.0 / ((double) qtbl->quantval[i] * + aanscalefactor[row] * aanscalefactor[col] * + (compptr->component_needed ? 16.0 : 8.0))); + i++; + } + } + } + fdct->pub.forward_DCT[ci] = forward_DCT_float; + break; +#endif + default: + ERREXIT(cinfo, JERR_NOT_COMPILED); + break; + } + } +} + + +/* + * Initialize FDCT manager. + */ + +GLOBAL(void) +jinit_forward_dct (j_compress_ptr cinfo) +{ + my_fdct_ptr fdct; + int ci; + jpeg_component_info *compptr; + + fdct = (my_fdct_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_fdct_controller)); + cinfo->fdct = &fdct->pub; + fdct->pub.start_pass = start_pass_fdctmgr; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Allocate a divisor table for each component */ + compptr->dct_table = + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(divisor_table)); + } +} diff --git a/compat/libjpeg/jchuff.c b/compat/libjpeg/jchuff.c new file mode 100755 index 0000000..92fd974 --- /dev/null +++ b/compat/libjpeg/jchuff.c @@ -0,0 +1,1573 @@ +/* + * jchuff.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 2006-2013 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains Huffman entropy encoding routines. + * Both sequential and progressive modes are supported in this single module. + * + * Much of the complexity here has to do with supporting output suspension. + * If the data destination module demands suspension, we want to be able to + * back up to the start of the current MCU. To do this, we copy state + * variables into local working storage, and update them back to the + * permanent JPEG objects only upon successful completion of an MCU. + * + * We do not support output suspension for the progressive JPEG mode, since + * the library currently does not allow multiple-scan files to be written + * with output suspension. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* The legal range of a DCT coefficient is + * -1024 .. +1023 for 8-bit data; + * -16384 .. +16383 for 12-bit data. + * Hence the magnitude should always fit in 10 or 14 bits respectively. + */ + +#if BITS_IN_JSAMPLE == 8 +#define MAX_COEF_BITS 10 +#else +#define MAX_COEF_BITS 14 +#endif + +/* Derived data constructed for each Huffman table */ + +typedef struct { + unsigned int ehufco[256]; /* code for each symbol */ + char ehufsi[256]; /* length of code for each symbol */ + /* If no code has been allocated for a symbol S, ehufsi[S] contains 0 */ +} c_derived_tbl; + + +/* Expanded entropy encoder object for Huffman encoding. + * + * The savable_state subrecord contains fields that change within an MCU, + * but must not be updated permanently until we complete the MCU. + */ + +typedef struct { + INT32 put_buffer; /* current bit-accumulation buffer */ + int put_bits; /* # of bits now in it */ + int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ +} savable_state; + +/* This macro is to work around compilers with missing or broken + * structure assignment. You'll need to fix this code if you have + * such a compiler and you change MAX_COMPS_IN_SCAN. + */ + +#ifndef NO_STRUCT_ASSIGN +#define ASSIGN_STATE(dest,src) ((dest) = (src)) +#else +#if MAX_COMPS_IN_SCAN == 4 +#define ASSIGN_STATE(dest,src) \ + ((dest).put_buffer = (src).put_buffer, \ + (dest).put_bits = (src).put_bits, \ + (dest).last_dc_val[0] = (src).last_dc_val[0], \ + (dest).last_dc_val[1] = (src).last_dc_val[1], \ + (dest).last_dc_val[2] = (src).last_dc_val[2], \ + (dest).last_dc_val[3] = (src).last_dc_val[3]) +#endif +#endif + + +typedef struct { + struct jpeg_entropy_encoder pub; /* public fields */ + + savable_state saved; /* Bit buffer & DC state at start of MCU */ + + /* These fields are NOT loaded into local working state. */ + unsigned int restarts_to_go; /* MCUs left in this restart interval */ + int next_restart_num; /* next restart number to write (0-7) */ + + /* Pointers to derived tables (these workspaces have image lifespan) */ + c_derived_tbl * dc_derived_tbls[NUM_HUFF_TBLS]; + c_derived_tbl * ac_derived_tbls[NUM_HUFF_TBLS]; + + /* Statistics tables for optimization */ + long * dc_count_ptrs[NUM_HUFF_TBLS]; + long * ac_count_ptrs[NUM_HUFF_TBLS]; + + /* Following fields used only in progressive mode */ + + /* Mode flag: TRUE for optimization, FALSE for actual data output */ + boolean gather_statistics; + + /* next_output_byte/free_in_buffer are local copies of cinfo->dest fields. + */ + JOCTET * next_output_byte; /* => next byte to write in buffer */ + size_t free_in_buffer; /* # of byte spaces remaining in buffer */ + j_compress_ptr cinfo; /* link to cinfo (needed for dump_buffer) */ + + /* Coding status for AC components */ + int ac_tbl_no; /* the table number of the single component */ + unsigned int EOBRUN; /* run length of EOBs */ + unsigned int BE; /* # of buffered correction bits before MCU */ + char * bit_buffer; /* buffer for correction bits (1 per char) */ + /* packing correction bits tightly would save some space but cost time... */ +} huff_entropy_encoder; + +typedef huff_entropy_encoder * huff_entropy_ptr; + +/* Working state while writing an MCU (sequential mode). + * This struct contains all the fields that are needed by subroutines. + */ + +typedef struct { + JOCTET * next_output_byte; /* => next byte to write in buffer */ + size_t free_in_buffer; /* # of byte spaces remaining in buffer */ + savable_state cur; /* Current bit buffer & DC state */ + j_compress_ptr cinfo; /* dump_buffer needs access to this */ +} working_state; + +/* MAX_CORR_BITS is the number of bits the AC refinement correction-bit + * buffer can hold. Larger sizes may slightly improve compression, but + * 1000 is already well into the realm of overkill. + * The minimum safe size is 64 bits. + */ + +#define MAX_CORR_BITS 1000 /* Max # of correction bits I can buffer */ + +/* IRIGHT_SHIFT is like RIGHT_SHIFT, but works on int rather than INT32. + * We assume that int right shift is unsigned if INT32 right shift is, + * which should be safe. + */ + +#ifdef RIGHT_SHIFT_IS_UNSIGNED +#define ISHIFT_TEMPS int ishift_temp; +#define IRIGHT_SHIFT(x,shft) \ + ((ishift_temp = (x)) < 0 ? \ + (ishift_temp >> (shft)) | ((~0) << (16-(shft))) : \ + (ishift_temp >> (shft))) +#else +#define ISHIFT_TEMPS +#define IRIGHT_SHIFT(x,shft) ((x) >> (shft)) +#endif + + +/* + * Compute the derived values for a Huffman table. + * This routine also performs some validation checks on the table. + */ + +LOCAL(void) +jpeg_make_c_derived_tbl (j_compress_ptr cinfo, boolean isDC, int tblno, + c_derived_tbl ** pdtbl) +{ + JHUFF_TBL *htbl; + c_derived_tbl *dtbl; + int p, i, l, lastp, si, maxsymbol; + char huffsize[257]; + unsigned int huffcode[257]; + unsigned int code; + + /* Note that huffsize[] and huffcode[] are filled in code-length order, + * paralleling the order of the symbols themselves in htbl->huffval[]. + */ + + /* Find the input Huffman table */ + if (tblno < 0 || tblno >= NUM_HUFF_TBLS) + ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno); + htbl = + isDC ? cinfo->dc_huff_tbl_ptrs[tblno] : cinfo->ac_huff_tbl_ptrs[tblno]; + if (htbl == NULL) + ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno); + + /* Allocate a workspace if we haven't already done so. */ + if (*pdtbl == NULL) + *pdtbl = (c_derived_tbl *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(c_derived_tbl)); + dtbl = *pdtbl; + + /* Figure C.1: make table of Huffman code length for each symbol */ + + p = 0; + for (l = 1; l <= 16; l++) { + i = (int) htbl->bits[l]; + if (i < 0 || p + i > 256) /* protect against table overrun */ + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + while (i--) + huffsize[p++] = (char) l; + } + huffsize[p] = 0; + lastp = p; + + /* Figure C.2: generate the codes themselves */ + /* We also validate that the counts represent a legal Huffman code tree. */ + + code = 0; + si = huffsize[0]; + p = 0; + while (huffsize[p]) { + while (((int) huffsize[p]) == si) { + huffcode[p++] = code; + code++; + } + /* code is now 1 more than the last code used for codelength si; but + * it must still fit in si bits, since no code is allowed to be all ones. + */ + if (((INT32) code) >= (((INT32) 1) << si)) + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + code <<= 1; + si++; + } + + /* Figure C.3: generate encoding tables */ + /* These are code and size indexed by symbol value */ + + /* Set all codeless symbols to have code length 0; + * this lets us detect duplicate VAL entries here, and later + * allows emit_bits to detect any attempt to emit such symbols. + */ + MEMZERO(dtbl->ehufsi, SIZEOF(dtbl->ehufsi)); + + /* This is also a convenient place to check for out-of-range + * and duplicated VAL entries. We allow 0..255 for AC symbols + * but only 0..15 for DC. (We could constrain them further + * based on data depth and mode, but this seems enough.) + */ + maxsymbol = isDC ? 15 : 255; + + for (p = 0; p < lastp; p++) { + i = htbl->huffval[p]; + if (i < 0 || i > maxsymbol || dtbl->ehufsi[i]) + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + dtbl->ehufco[i] = huffcode[p]; + dtbl->ehufsi[i] = huffsize[p]; + } +} + + +/* Outputting bytes to the file. + * NB: these must be called only when actually outputting, + * that is, entropy->gather_statistics == FALSE. + */ + +/* Emit a byte, taking 'action' if must suspend. */ +#define emit_byte_s(state,val,action) \ + { *(state)->next_output_byte++ = (JOCTET) (val); \ + if (--(state)->free_in_buffer == 0) \ + if (! dump_buffer_s(state)) \ + { action; } } + +/* Emit a byte */ +#define emit_byte_e(entropy,val) \ + { *(entropy)->next_output_byte++ = (JOCTET) (val); \ + if (--(entropy)->free_in_buffer == 0) \ + dump_buffer_e(entropy); } + + +LOCAL(boolean) +dump_buffer_s (working_state * state) +/* Empty the output buffer; return TRUE if successful, FALSE if must suspend */ +{ + struct jpeg_destination_mgr * dest = state->cinfo->dest; + + if (! (*dest->empty_output_buffer) (state->cinfo)) + return FALSE; + /* After a successful buffer dump, must reset buffer pointers */ + state->next_output_byte = dest->next_output_byte; + state->free_in_buffer = dest->free_in_buffer; + return TRUE; +} + + +LOCAL(void) +dump_buffer_e (huff_entropy_ptr entropy) +/* Empty the output buffer; we do not support suspension in this case. */ +{ + struct jpeg_destination_mgr * dest = entropy->cinfo->dest; + + if (! (*dest->empty_output_buffer) (entropy->cinfo)) + ERREXIT(entropy->cinfo, JERR_CANT_SUSPEND); + /* After a successful buffer dump, must reset buffer pointers */ + entropy->next_output_byte = dest->next_output_byte; + entropy->free_in_buffer = dest->free_in_buffer; +} + + +/* Outputting bits to the file */ + +/* Only the right 24 bits of put_buffer are used; the valid bits are + * left-justified in this part. At most 16 bits can be passed to emit_bits + * in one call, and we never retain more than 7 bits in put_buffer + * between calls, so 24 bits are sufficient. + */ + +INLINE +LOCAL(boolean) +emit_bits_s (working_state * state, unsigned int code, int size) +/* Emit some bits; return TRUE if successful, FALSE if must suspend */ +{ + /* This routine is heavily used, so it's worth coding tightly. */ + register INT32 put_buffer; + register int put_bits; + + /* if size is 0, caller used an invalid Huffman table entry */ + if (size == 0) + ERREXIT(state->cinfo, JERR_HUFF_MISSING_CODE); + + /* mask off any extra bits in code */ + put_buffer = ((INT32) code) & ((((INT32) 1) << size) - 1); + + /* new number of bits in buffer */ + put_bits = size + state->cur.put_bits; + + put_buffer <<= 24 - put_bits; /* align incoming bits */ + + /* and merge with old buffer contents */ + put_buffer |= state->cur.put_buffer; + + while (put_bits >= 8) { + int c = (int) ((put_buffer >> 16) & 0xFF); + + emit_byte_s(state, c, return FALSE); + if (c == 0xFF) { /* need to stuff a zero byte? */ + emit_byte_s(state, 0, return FALSE); + } + put_buffer <<= 8; + put_bits -= 8; + } + + state->cur.put_buffer = put_buffer; /* update state variables */ + state->cur.put_bits = put_bits; + + return TRUE; +} + + +INLINE +LOCAL(void) +emit_bits_e (huff_entropy_ptr entropy, unsigned int code, int size) +/* Emit some bits, unless we are in gather mode */ +{ + /* This routine is heavily used, so it's worth coding tightly. */ + register INT32 put_buffer; + register int put_bits; + + /* if size is 0, caller used an invalid Huffman table entry */ + if (size == 0) + ERREXIT(entropy->cinfo, JERR_HUFF_MISSING_CODE); + + if (entropy->gather_statistics) + return; /* do nothing if we're only getting stats */ + + /* mask off any extra bits in code */ + put_buffer = ((INT32) code) & ((((INT32) 1) << size) - 1); + + /* new number of bits in buffer */ + put_bits = size + entropy->saved.put_bits; + + put_buffer <<= 24 - put_bits; /* align incoming bits */ + + /* and merge with old buffer contents */ + put_buffer |= entropy->saved.put_buffer; + + while (put_bits >= 8) { + int c = (int) ((put_buffer >> 16) & 0xFF); + + emit_byte_e(entropy, c); + if (c == 0xFF) { /* need to stuff a zero byte? */ + emit_byte_e(entropy, 0); + } + put_buffer <<= 8; + put_bits -= 8; + } + + entropy->saved.put_buffer = put_buffer; /* update variables */ + entropy->saved.put_bits = put_bits; +} + + +LOCAL(boolean) +flush_bits_s (working_state * state) +{ + if (! emit_bits_s(state, 0x7F, 7)) /* fill any partial byte with ones */ + return FALSE; + state->cur.put_buffer = 0; /* and reset bit-buffer to empty */ + state->cur.put_bits = 0; + return TRUE; +} + + +LOCAL(void) +flush_bits_e (huff_entropy_ptr entropy) +{ + emit_bits_e(entropy, 0x7F, 7); /* fill any partial byte with ones */ + entropy->saved.put_buffer = 0; /* and reset bit-buffer to empty */ + entropy->saved.put_bits = 0; +} + + +/* + * Emit (or just count) a Huffman symbol. + */ + +INLINE +LOCAL(void) +emit_dc_symbol (huff_entropy_ptr entropy, int tbl_no, int symbol) +{ + if (entropy->gather_statistics) + entropy->dc_count_ptrs[tbl_no][symbol]++; + else { + c_derived_tbl * tbl = entropy->dc_derived_tbls[tbl_no]; + emit_bits_e(entropy, tbl->ehufco[symbol], tbl->ehufsi[symbol]); + } +} + + +INLINE +LOCAL(void) +emit_ac_symbol (huff_entropy_ptr entropy, int tbl_no, int symbol) +{ + if (entropy->gather_statistics) + entropy->ac_count_ptrs[tbl_no][symbol]++; + else { + c_derived_tbl * tbl = entropy->ac_derived_tbls[tbl_no]; + emit_bits_e(entropy, tbl->ehufco[symbol], tbl->ehufsi[symbol]); + } +} + + +/* + * Emit bits from a correction bit buffer. + */ + +LOCAL(void) +emit_buffered_bits (huff_entropy_ptr entropy, char * bufstart, + unsigned int nbits) +{ + if (entropy->gather_statistics) + return; /* no real work */ + + while (nbits > 0) { + emit_bits_e(entropy, (unsigned int) (*bufstart), 1); + bufstart++; + nbits--; + } +} + + +/* + * Emit any pending EOBRUN symbol. + */ + +LOCAL(void) +emit_eobrun (huff_entropy_ptr entropy) +{ + register int temp, nbits; + + if (entropy->EOBRUN > 0) { /* if there is any pending EOBRUN */ + temp = entropy->EOBRUN; + nbits = 0; + while ((temp >>= 1)) + nbits++; + /* safety check: shouldn't happen given limited correction-bit buffer */ + if (nbits > 14) + ERREXIT(entropy->cinfo, JERR_HUFF_MISSING_CODE); + + emit_ac_symbol(entropy, entropy->ac_tbl_no, nbits << 4); + if (nbits) + emit_bits_e(entropy, entropy->EOBRUN, nbits); + + entropy->EOBRUN = 0; + + /* Emit any buffered correction bits */ + emit_buffered_bits(entropy, entropy->bit_buffer, entropy->BE); + entropy->BE = 0; + } +} + + +/* + * Emit a restart marker & resynchronize predictions. + */ + +LOCAL(boolean) +emit_restart_s (working_state * state, int restart_num) +{ + int ci; + + if (! flush_bits_s(state)) + return FALSE; + + emit_byte_s(state, 0xFF, return FALSE); + emit_byte_s(state, JPEG_RST0 + restart_num, return FALSE); + + /* Re-initialize DC predictions to 0 */ + for (ci = 0; ci < state->cinfo->comps_in_scan; ci++) + state->cur.last_dc_val[ci] = 0; + + /* The restart counter is not updated until we successfully write the MCU. */ + + return TRUE; +} + + +LOCAL(void) +emit_restart_e (huff_entropy_ptr entropy, int restart_num) +{ + int ci; + + emit_eobrun(entropy); + + if (! entropy->gather_statistics) { + flush_bits_e(entropy); + emit_byte_e(entropy, 0xFF); + emit_byte_e(entropy, JPEG_RST0 + restart_num); + } + + if (entropy->cinfo->Ss == 0) { + /* Re-initialize DC predictions to 0 */ + for (ci = 0; ci < entropy->cinfo->comps_in_scan; ci++) + entropy->saved.last_dc_val[ci] = 0; + } else { + /* Re-initialize all AC-related fields to 0 */ + entropy->EOBRUN = 0; + entropy->BE = 0; + } +} + + +/* + * MCU encoding for DC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + register int temp, temp2; + register int nbits; + int blkn, ci, tbl; + ISHIFT_TEMPS + + entropy->next_output_byte = cinfo->dest->next_output_byte; + entropy->free_in_buffer = cinfo->dest->free_in_buffer; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) + if (entropy->restarts_to_go == 0) + emit_restart_e(entropy, entropy->next_restart_num); + + /* Encode the MCU data blocks */ + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + ci = cinfo->MCU_membership[blkn]; + tbl = cinfo->cur_comp_info[ci]->dc_tbl_no; + + /* Compute the DC value after the required point transform by Al. + * This is simply an arithmetic right shift. + */ + temp = IRIGHT_SHIFT((int) (MCU_data[blkn][0][0]), cinfo->Al); + + /* DC differences are figured on the point-transformed values. */ + temp2 = temp - entropy->saved.last_dc_val[ci]; + entropy->saved.last_dc_val[ci] = temp; + + /* Encode the DC coefficient difference per section G.1.2.1 */ + temp = temp2; + if (temp < 0) { + temp = -temp; /* temp is abs value of input */ + /* For a negative input, want temp2 = bitwise complement of abs(input) */ + /* This code assumes we are on a two's complement machine */ + temp2--; + } + + /* Find the number of bits needed for the magnitude of the coefficient */ + nbits = 0; + while (temp) { + nbits++; + temp >>= 1; + } + /* Check for out-of-range coefficient values. + * Since we're encoding a difference, the range limit is twice as much. + */ + if (nbits > MAX_COEF_BITS+1) + ERREXIT(cinfo, JERR_BAD_DCT_COEF); + + /* Count/emit the Huffman-coded symbol for the number of bits */ + emit_dc_symbol(entropy, tbl, nbits); + + /* Emit that number of bits of the value, if positive, */ + /* or the complement of its magnitude, if negative. */ + if (nbits) /* emit_bits rejects calls with size 0 */ + emit_bits_e(entropy, (unsigned int) temp2, nbits); + } + + cinfo->dest->next_output_byte = entropy->next_output_byte; + cinfo->dest->free_in_buffer = entropy->free_in_buffer; + + /* Update restart-interval state too */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + return TRUE; +} + + +/* + * MCU encoding for AC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + const int * natural_order; + JBLOCKROW block; + register int temp, temp2; + register int nbits; + register int r, k; + int Se, Al; + + entropy->next_output_byte = cinfo->dest->next_output_byte; + entropy->free_in_buffer = cinfo->dest->free_in_buffer; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) + if (entropy->restarts_to_go == 0) + emit_restart_e(entropy, entropy->next_restart_num); + + Se = cinfo->Se; + Al = cinfo->Al; + natural_order = cinfo->natural_order; + + /* Encode the MCU data block */ + block = MCU_data[0]; + + /* Encode the AC coefficients per section G.1.2.2, fig. G.3 */ + + r = 0; /* r = run length of zeros */ + + for (k = cinfo->Ss; k <= Se; k++) { + if ((temp = (*block)[natural_order[k]]) == 0) { + r++; + continue; + } + /* We must apply the point transform by Al. For AC coefficients this + * is an integer division with rounding towards 0. To do this portably + * in C, we shift after obtaining the absolute value; so the code is + * interwoven with finding the abs value (temp) and output bits (temp2). + */ + if (temp < 0) { + temp = -temp; /* temp is abs value of input */ + temp >>= Al; /* apply the point transform */ + /* For a negative coef, want temp2 = bitwise complement of abs(coef) */ + temp2 = ~temp; + } else { + temp >>= Al; /* apply the point transform */ + temp2 = temp; + } + /* Watch out for case that nonzero coef is zero after point transform */ + if (temp == 0) { + r++; + continue; + } + + /* Emit any pending EOBRUN */ + if (entropy->EOBRUN > 0) + emit_eobrun(entropy); + /* if run length > 15, must emit special run-length-16 codes (0xF0) */ + while (r > 15) { + emit_ac_symbol(entropy, entropy->ac_tbl_no, 0xF0); + r -= 16; + } + + /* Find the number of bits needed for the magnitude of the coefficient */ + nbits = 1; /* there must be at least one 1 bit */ + while ((temp >>= 1)) + nbits++; + /* Check for out-of-range coefficient values */ + if (nbits > MAX_COEF_BITS) + ERREXIT(cinfo, JERR_BAD_DCT_COEF); + + /* Count/emit Huffman symbol for run length / number of bits */ + emit_ac_symbol(entropy, entropy->ac_tbl_no, (r << 4) + nbits); + + /* Emit that number of bits of the value, if positive, */ + /* or the complement of its magnitude, if negative. */ + emit_bits_e(entropy, (unsigned int) temp2, nbits); + + r = 0; /* reset zero run length */ + } + + if (r > 0) { /* If there are trailing zeroes, */ + entropy->EOBRUN++; /* count an EOB */ + if (entropy->EOBRUN == 0x7FFF) + emit_eobrun(entropy); /* force it out to avoid overflow */ + } + + cinfo->dest->next_output_byte = entropy->next_output_byte; + cinfo->dest->free_in_buffer = entropy->free_in_buffer; + + /* Update restart-interval state too */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + return TRUE; +} + + +/* + * MCU encoding for DC successive approximation refinement scan. + * Note: we assume such scans can be multi-component, + * although the spec is not very clear on the point. + */ + +METHODDEF(boolean) +encode_mcu_DC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int Al, blkn; + + entropy->next_output_byte = cinfo->dest->next_output_byte; + entropy->free_in_buffer = cinfo->dest->free_in_buffer; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) + if (entropy->restarts_to_go == 0) + emit_restart_e(entropy, entropy->next_restart_num); + + Al = cinfo->Al; + + /* Encode the MCU data blocks */ + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + /* We simply emit the Al'th bit of the DC coefficient value. */ + emit_bits_e(entropy, (unsigned int) (MCU_data[blkn][0][0] >> Al), 1); + } + + cinfo->dest->next_output_byte = entropy->next_output_byte; + cinfo->dest->free_in_buffer = entropy->free_in_buffer; + + /* Update restart-interval state too */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + return TRUE; +} + + +/* + * MCU encoding for AC successive approximation refinement scan. + */ + +METHODDEF(boolean) +encode_mcu_AC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + const int * natural_order; + JBLOCKROW block; + register int temp; + register int r, k; + int Se, Al; + int EOB; + char *BR_buffer; + unsigned int BR; + int absvalues[DCTSIZE2]; + + entropy->next_output_byte = cinfo->dest->next_output_byte; + entropy->free_in_buffer = cinfo->dest->free_in_buffer; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) + if (entropy->restarts_to_go == 0) + emit_restart_e(entropy, entropy->next_restart_num); + + Se = cinfo->Se; + Al = cinfo->Al; + natural_order = cinfo->natural_order; + + /* Encode the MCU data block */ + block = MCU_data[0]; + + /* It is convenient to make a pre-pass to determine the transformed + * coefficients' absolute values and the EOB position. + */ + EOB = 0; + for (k = cinfo->Ss; k <= Se; k++) { + temp = (*block)[natural_order[k]]; + /* We must apply the point transform by Al. For AC coefficients this + * is an integer division with rounding towards 0. To do this portably + * in C, we shift after obtaining the absolute value. + */ + if (temp < 0) + temp = -temp; /* temp is abs value of input */ + temp >>= Al; /* apply the point transform */ + absvalues[k] = temp; /* save abs value for main pass */ + if (temp == 1) + EOB = k; /* EOB = index of last newly-nonzero coef */ + } + + /* Encode the AC coefficients per section G.1.2.3, fig. G.7 */ + + r = 0; /* r = run length of zeros */ + BR = 0; /* BR = count of buffered bits added now */ + BR_buffer = entropy->bit_buffer + entropy->BE; /* Append bits to buffer */ + + for (k = cinfo->Ss; k <= Se; k++) { + if ((temp = absvalues[k]) == 0) { + r++; + continue; + } + + /* Emit any required ZRLs, but not if they can be folded into EOB */ + while (r > 15 && k <= EOB) { + /* emit any pending EOBRUN and the BE correction bits */ + emit_eobrun(entropy); + /* Emit ZRL */ + emit_ac_symbol(entropy, entropy->ac_tbl_no, 0xF0); + r -= 16; + /* Emit buffered correction bits that must be associated with ZRL */ + emit_buffered_bits(entropy, BR_buffer, BR); + BR_buffer = entropy->bit_buffer; /* BE bits are gone now */ + BR = 0; + } + + /* If the coef was previously nonzero, it only needs a correction bit. + * NOTE: a straight translation of the spec's figure G.7 would suggest + * that we also need to test r > 15. But if r > 15, we can only get here + * if k > EOB, which implies that this coefficient is not 1. + */ + if (temp > 1) { + /* The correction bit is the next bit of the absolute value. */ + BR_buffer[BR++] = (char) (temp & 1); + continue; + } + + /* Emit any pending EOBRUN and the BE correction bits */ + emit_eobrun(entropy); + + /* Count/emit Huffman symbol for run length / number of bits */ + emit_ac_symbol(entropy, entropy->ac_tbl_no, (r << 4) + 1); + + /* Emit output bit for newly-nonzero coef */ + temp = ((*block)[natural_order[k]] < 0) ? 0 : 1; + emit_bits_e(entropy, (unsigned int) temp, 1); + + /* Emit buffered correction bits that must be associated with this code */ + emit_buffered_bits(entropy, BR_buffer, BR); + BR_buffer = entropy->bit_buffer; /* BE bits are gone now */ + BR = 0; + r = 0; /* reset zero run length */ + } + + if (r > 0 || BR > 0) { /* If there are trailing zeroes, */ + entropy->EOBRUN++; /* count an EOB */ + entropy->BE += BR; /* concat my correction bits to older ones */ + /* We force out the EOB if we risk either: + * 1. overflow of the EOB counter; + * 2. overflow of the correction bit buffer during the next MCU. + */ + if (entropy->EOBRUN == 0x7FFF || entropy->BE > (MAX_CORR_BITS-DCTSIZE2+1)) + emit_eobrun(entropy); + } + + cinfo->dest->next_output_byte = entropy->next_output_byte; + cinfo->dest->free_in_buffer = entropy->free_in_buffer; + + /* Update restart-interval state too */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + return TRUE; +} + + +/* Encode a single block's worth of coefficients */ + +LOCAL(boolean) +encode_one_block (working_state * state, JCOEFPTR block, int last_dc_val, + c_derived_tbl *dctbl, c_derived_tbl *actbl) +{ + register int temp, temp2; + register int nbits; + register int r, k; + int Se = state->cinfo->lim_Se; + const int * natural_order = state->cinfo->natural_order; + + /* Encode the DC coefficient difference per section F.1.2.1 */ + + temp = temp2 = block[0] - last_dc_val; + + if (temp < 0) { + temp = -temp; /* temp is abs value of input */ + /* For a negative input, want temp2 = bitwise complement of abs(input) */ + /* This code assumes we are on a two's complement machine */ + temp2--; + } + + /* Find the number of bits needed for the magnitude of the coefficient */ + nbits = 0; + while (temp) { + nbits++; + temp >>= 1; + } + /* Check for out-of-range coefficient values. + * Since we're encoding a difference, the range limit is twice as much. + */ + if (nbits > MAX_COEF_BITS+1) + ERREXIT(state->cinfo, JERR_BAD_DCT_COEF); + + /* Emit the Huffman-coded symbol for the number of bits */ + if (! emit_bits_s(state, dctbl->ehufco[nbits], dctbl->ehufsi[nbits])) + return FALSE; + + /* Emit that number of bits of the value, if positive, */ + /* or the complement of its magnitude, if negative. */ + if (nbits) /* emit_bits rejects calls with size 0 */ + if (! emit_bits_s(state, (unsigned int) temp2, nbits)) + return FALSE; + + /* Encode the AC coefficients per section F.1.2.2 */ + + r = 0; /* r = run length of zeros */ + + for (k = 1; k <= Se; k++) { + if ((temp2 = block[natural_order[k]]) == 0) { + r++; + } else { + /* if run length > 15, must emit special run-length-16 codes (0xF0) */ + while (r > 15) { + if (! emit_bits_s(state, actbl->ehufco[0xF0], actbl->ehufsi[0xF0])) + return FALSE; + r -= 16; + } + + temp = temp2; + if (temp < 0) { + temp = -temp; /* temp is abs value of input */ + /* This code assumes we are on a two's complement machine */ + temp2--; + } + + /* Find the number of bits needed for the magnitude of the coefficient */ + nbits = 1; /* there must be at least one 1 bit */ + while ((temp >>= 1)) + nbits++; + /* Check for out-of-range coefficient values */ + if (nbits > MAX_COEF_BITS) + ERREXIT(state->cinfo, JERR_BAD_DCT_COEF); + + /* Emit Huffman symbol for run length / number of bits */ + temp = (r << 4) + nbits; + if (! emit_bits_s(state, actbl->ehufco[temp], actbl->ehufsi[temp])) + return FALSE; + + /* Emit that number of bits of the value, if positive, */ + /* or the complement of its magnitude, if negative. */ + if (! emit_bits_s(state, (unsigned int) temp2, nbits)) + return FALSE; + + r = 0; + } + } + + /* If the last coef(s) were zero, emit an end-of-block code */ + if (r > 0) + if (! emit_bits_s(state, actbl->ehufco[0], actbl->ehufsi[0])) + return FALSE; + + return TRUE; +} + + +/* + * Encode and output one MCU's worth of Huffman-compressed coefficients. + */ + +METHODDEF(boolean) +encode_mcu_huff (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + working_state state; + int blkn, ci; + jpeg_component_info * compptr; + + /* Load up working state */ + state.next_output_byte = cinfo->dest->next_output_byte; + state.free_in_buffer = cinfo->dest->free_in_buffer; + ASSIGN_STATE(state.cur, entropy->saved); + state.cinfo = cinfo; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (! emit_restart_s(&state, entropy->next_restart_num)) + return FALSE; + } + + /* Encode the MCU data blocks */ + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + ci = cinfo->MCU_membership[blkn]; + compptr = cinfo->cur_comp_info[ci]; + if (! encode_one_block(&state, + MCU_data[blkn][0], state.cur.last_dc_val[ci], + entropy->dc_derived_tbls[compptr->dc_tbl_no], + entropy->ac_derived_tbls[compptr->ac_tbl_no])) + return FALSE; + /* Update last_dc_val */ + state.cur.last_dc_val[ci] = MCU_data[blkn][0][0]; + } + + /* Completed MCU, so update state */ + cinfo->dest->next_output_byte = state.next_output_byte; + cinfo->dest->free_in_buffer = state.free_in_buffer; + ASSIGN_STATE(entropy->saved, state.cur); + + /* Update restart-interval state too */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + return TRUE; +} + + +/* + * Finish up at the end of a Huffman-compressed scan. + */ + +METHODDEF(void) +finish_pass_huff (j_compress_ptr cinfo) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + working_state state; + + if (cinfo->progressive_mode) { + entropy->next_output_byte = cinfo->dest->next_output_byte; + entropy->free_in_buffer = cinfo->dest->free_in_buffer; + + /* Flush out any buffered data */ + emit_eobrun(entropy); + flush_bits_e(entropy); + + cinfo->dest->next_output_byte = entropy->next_output_byte; + cinfo->dest->free_in_buffer = entropy->free_in_buffer; + } else { + /* Load up working state ... flush_bits needs it */ + state.next_output_byte = cinfo->dest->next_output_byte; + state.free_in_buffer = cinfo->dest->free_in_buffer; + ASSIGN_STATE(state.cur, entropy->saved); + state.cinfo = cinfo; + + /* Flush out the last data */ + if (! flush_bits_s(&state)) + ERREXIT(cinfo, JERR_CANT_SUSPEND); + + /* Update state */ + cinfo->dest->next_output_byte = state.next_output_byte; + cinfo->dest->free_in_buffer = state.free_in_buffer; + ASSIGN_STATE(entropy->saved, state.cur); + } +} + + +/* + * Huffman coding optimization. + * + * We first scan the supplied data and count the number of uses of each symbol + * that is to be Huffman-coded. (This process MUST agree with the code above.) + * Then we build a Huffman coding tree for the observed counts. + * Symbols which are not needed at all for the particular image are not + * assigned any code, which saves space in the DHT marker as well as in + * the compressed data. + */ + + +/* Process a single block's worth of coefficients */ + +LOCAL(void) +htest_one_block (j_compress_ptr cinfo, JCOEFPTR block, int last_dc_val, + long dc_counts[], long ac_counts[]) +{ + register int temp; + register int nbits; + register int r, k; + int Se = cinfo->lim_Se; + const int * natural_order = cinfo->natural_order; + + /* Encode the DC coefficient difference per section F.1.2.1 */ + + temp = block[0] - last_dc_val; + if (temp < 0) + temp = -temp; + + /* Find the number of bits needed for the magnitude of the coefficient */ + nbits = 0; + while (temp) { + nbits++; + temp >>= 1; + } + /* Check for out-of-range coefficient values. + * Since we're encoding a difference, the range limit is twice as much. + */ + if (nbits > MAX_COEF_BITS+1) + ERREXIT(cinfo, JERR_BAD_DCT_COEF); + + /* Count the Huffman symbol for the number of bits */ + dc_counts[nbits]++; + + /* Encode the AC coefficients per section F.1.2.2 */ + + r = 0; /* r = run length of zeros */ + + for (k = 1; k <= Se; k++) { + if ((temp = block[natural_order[k]]) == 0) { + r++; + } else { + /* if run length > 15, must emit special run-length-16 codes (0xF0) */ + while (r > 15) { + ac_counts[0xF0]++; + r -= 16; + } + + /* Find the number of bits needed for the magnitude of the coefficient */ + if (temp < 0) + temp = -temp; + + /* Find the number of bits needed for the magnitude of the coefficient */ + nbits = 1; /* there must be at least one 1 bit */ + while ((temp >>= 1)) + nbits++; + /* Check for out-of-range coefficient values */ + if (nbits > MAX_COEF_BITS) + ERREXIT(cinfo, JERR_BAD_DCT_COEF); + + /* Count Huffman symbol for run length / number of bits */ + ac_counts[(r << 4) + nbits]++; + + r = 0; + } + } + + /* If the last coef(s) were zero, emit an end-of-block code */ + if (r > 0) + ac_counts[0]++; +} + + +/* + * Trial-encode one MCU's worth of Huffman-compressed coefficients. + * No data is actually output, so no suspension return is possible. + */ + +METHODDEF(boolean) +encode_mcu_gather (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int blkn, ci; + jpeg_component_info * compptr; + + /* Take care of restart intervals if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + /* Re-initialize DC predictions to 0 */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) + entropy->saved.last_dc_val[ci] = 0; + /* Update restart state */ + entropy->restarts_to_go = cinfo->restart_interval; + } + entropy->restarts_to_go--; + } + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + ci = cinfo->MCU_membership[blkn]; + compptr = cinfo->cur_comp_info[ci]; + htest_one_block(cinfo, MCU_data[blkn][0], entropy->saved.last_dc_val[ci], + entropy->dc_count_ptrs[compptr->dc_tbl_no], + entropy->ac_count_ptrs[compptr->ac_tbl_no]); + entropy->saved.last_dc_val[ci] = MCU_data[blkn][0][0]; + } + + return TRUE; +} + + +/* + * Generate the best Huffman code table for the given counts, fill htbl. + * + * The JPEG standard requires that no symbol be assigned a codeword of all + * one bits (so that padding bits added at the end of a compressed segment + * can't look like a valid code). Because of the canonical ordering of + * codewords, this just means that there must be an unused slot in the + * longest codeword length category. Section K.2 of the JPEG spec suggests + * reserving such a slot by pretending that symbol 256 is a valid symbol + * with count 1. In theory that's not optimal; giving it count zero but + * including it in the symbol set anyway should give a better Huffman code. + * But the theoretically better code actually seems to come out worse in + * practice, because it produces more all-ones bytes (which incur stuffed + * zero bytes in the final file). In any case the difference is tiny. + * + * The JPEG standard requires Huffman codes to be no more than 16 bits long. + * If some symbols have a very small but nonzero probability, the Huffman tree + * must be adjusted to meet the code length restriction. We currently use + * the adjustment method suggested in JPEG section K.2. This method is *not* + * optimal; it may not choose the best possible limited-length code. But + * typically only very-low-frequency symbols will be given less-than-optimal + * lengths, so the code is almost optimal. Experimental comparisons against + * an optimal limited-length-code algorithm indicate that the difference is + * microscopic --- usually less than a hundredth of a percent of total size. + * So the extra complexity of an optimal algorithm doesn't seem worthwhile. + */ + +LOCAL(void) +jpeg_gen_optimal_table (j_compress_ptr cinfo, JHUFF_TBL * htbl, long freq[]) +{ +#define MAX_CLEN 32 /* assumed maximum initial code length */ + UINT8 bits[MAX_CLEN+1]; /* bits[k] = # of symbols with code length k */ + int codesize[257]; /* codesize[k] = code length of symbol k */ + int others[257]; /* next symbol in current branch of tree */ + int c1, c2; + int p, i, j; + long v; + + /* This algorithm is explained in section K.2 of the JPEG standard */ + + MEMZERO(bits, SIZEOF(bits)); + MEMZERO(codesize, SIZEOF(codesize)); + for (i = 0; i < 257; i++) + others[i] = -1; /* init links to empty */ + + freq[256] = 1; /* make sure 256 has a nonzero count */ + /* Including the pseudo-symbol 256 in the Huffman procedure guarantees + * that no real symbol is given code-value of all ones, because 256 + * will be placed last in the largest codeword category. + */ + + /* Huffman's basic algorithm to assign optimal code lengths to symbols */ + + for (;;) { + /* Find the smallest nonzero frequency, set c1 = its symbol */ + /* In case of ties, take the larger symbol number */ + c1 = -1; + v = 1000000000L; + for (i = 0; i <= 256; i++) { + if (freq[i] && freq[i] <= v) { + v = freq[i]; + c1 = i; + } + } + + /* Find the next smallest nonzero frequency, set c2 = its symbol */ + /* In case of ties, take the larger symbol number */ + c2 = -1; + v = 1000000000L; + for (i = 0; i <= 256; i++) { + if (freq[i] && freq[i] <= v && i != c1) { + v = freq[i]; + c2 = i; + } + } + + /* Done if we've merged everything into one frequency */ + if (c2 < 0) + break; + + /* Else merge the two counts/trees */ + freq[c1] += freq[c2]; + freq[c2] = 0; + + /* Increment the codesize of everything in c1's tree branch */ + codesize[c1]++; + while (others[c1] >= 0) { + c1 = others[c1]; + codesize[c1]++; + } + + others[c1] = c2; /* chain c2 onto c1's tree branch */ + + /* Increment the codesize of everything in c2's tree branch */ + codesize[c2]++; + while (others[c2] >= 0) { + c2 = others[c2]; + codesize[c2]++; + } + } + + /* Now count the number of symbols of each code length */ + for (i = 0; i <= 256; i++) { + if (codesize[i]) { + /* The JPEG standard seems to think that this can't happen, */ + /* but I'm paranoid... */ + if (codesize[i] > MAX_CLEN) + ERREXIT(cinfo, JERR_HUFF_CLEN_OVERFLOW); + + bits[codesize[i]]++; + } + } + + /* JPEG doesn't allow symbols with code lengths over 16 bits, so if the pure + * Huffman procedure assigned any such lengths, we must adjust the coding. + * Here is what the JPEG spec says about how this next bit works: + * Since symbols are paired for the longest Huffman code, the symbols are + * removed from this length category two at a time. The prefix for the pair + * (which is one bit shorter) is allocated to one of the pair; then, + * skipping the BITS entry for that prefix length, a code word from the next + * shortest nonzero BITS entry is converted into a prefix for two code words + * one bit longer. + */ + + for (i = MAX_CLEN; i > 16; i--) { + while (bits[i] > 0) { + j = i - 2; /* find length of new prefix to be used */ + while (bits[j] == 0) + j--; + + bits[i] -= 2; /* remove two symbols */ + bits[i-1]++; /* one goes in this length */ + bits[j+1] += 2; /* two new symbols in this length */ + bits[j]--; /* symbol of this length is now a prefix */ + } + } + + /* Remove the count for the pseudo-symbol 256 from the largest codelength */ + while (bits[i] == 0) /* find largest codelength still in use */ + i--; + bits[i]--; + + /* Return final symbol counts (only for lengths 0..16) */ + MEMCOPY(htbl->bits, bits, SIZEOF(htbl->bits)); + + /* Return a list of the symbols sorted by code length */ + /* It's not real clear to me why we don't need to consider the codelength + * changes made above, but the JPEG spec seems to think this works. + */ + p = 0; + for (i = 1; i <= MAX_CLEN; i++) { + for (j = 0; j <= 255; j++) { + if (codesize[j] == i) { + htbl->huffval[p] = (UINT8) j; + p++; + } + } + } + + /* Set sent_table FALSE so updated table will be written to JPEG file. */ + htbl->sent_table = FALSE; +} + + +/* + * Finish up a statistics-gathering pass and create the new Huffman tables. + */ + +METHODDEF(void) +finish_pass_gather (j_compress_ptr cinfo) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int ci, tbl; + jpeg_component_info * compptr; + JHUFF_TBL **htblptr; + boolean did_dc[NUM_HUFF_TBLS]; + boolean did_ac[NUM_HUFF_TBLS]; + + /* It's important not to apply jpeg_gen_optimal_table more than once + * per table, because it clobbers the input frequency counts! + */ + if (cinfo->progressive_mode) + /* Flush out buffered data (all we care about is counting the EOB symbol) */ + emit_eobrun(entropy); + + MEMZERO(did_dc, SIZEOF(did_dc)); + MEMZERO(did_ac, SIZEOF(did_ac)); + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* DC needs no table for refinement scan */ + if (cinfo->Ss == 0 && cinfo->Ah == 0) { + tbl = compptr->dc_tbl_no; + if (! did_dc[tbl]) { + htblptr = & cinfo->dc_huff_tbl_ptrs[tbl]; + if (*htblptr == NULL) + *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); + jpeg_gen_optimal_table(cinfo, *htblptr, entropy->dc_count_ptrs[tbl]); + did_dc[tbl] = TRUE; + } + } + /* AC needs no table when not present */ + if (cinfo->Se) { + tbl = compptr->ac_tbl_no; + if (! did_ac[tbl]) { + htblptr = & cinfo->ac_huff_tbl_ptrs[tbl]; + if (*htblptr == NULL) + *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); + jpeg_gen_optimal_table(cinfo, *htblptr, entropy->ac_count_ptrs[tbl]); + did_ac[tbl] = TRUE; + } + } + } +} + + +/* + * Initialize for a Huffman-compressed scan. + * If gather_statistics is TRUE, we do not output anything during the scan, + * just count the Huffman symbols used and generate Huffman code tables. + */ + +METHODDEF(void) +start_pass_huff (j_compress_ptr cinfo, boolean gather_statistics) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int ci, tbl; + jpeg_component_info * compptr; + + if (gather_statistics) + entropy->pub.finish_pass = finish_pass_gather; + else + entropy->pub.finish_pass = finish_pass_huff; + + if (cinfo->progressive_mode) { + entropy->cinfo = cinfo; + entropy->gather_statistics = gather_statistics; + + /* We assume jcmaster.c already validated the scan parameters. */ + + /* Select execution routine */ + if (cinfo->Ah == 0) { + if (cinfo->Ss == 0) + entropy->pub.encode_mcu = encode_mcu_DC_first; + else + entropy->pub.encode_mcu = encode_mcu_AC_first; + } else { + if (cinfo->Ss == 0) + entropy->pub.encode_mcu = encode_mcu_DC_refine; + else { + entropy->pub.encode_mcu = encode_mcu_AC_refine; + /* AC refinement needs a correction bit buffer */ + if (entropy->bit_buffer == NULL) + entropy->bit_buffer = (char *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + MAX_CORR_BITS * SIZEOF(char)); + } + } + + /* Initialize AC stuff */ + entropy->ac_tbl_no = cinfo->cur_comp_info[0]->ac_tbl_no; + entropy->EOBRUN = 0; + entropy->BE = 0; + } else { + if (gather_statistics) + entropy->pub.encode_mcu = encode_mcu_gather; + else + entropy->pub.encode_mcu = encode_mcu_huff; + } + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* DC needs no table for refinement scan */ + if (cinfo->Ss == 0 && cinfo->Ah == 0) { + tbl = compptr->dc_tbl_no; + if (gather_statistics) { + /* Check for invalid table index */ + /* (make_c_derived_tbl does this in the other path) */ + if (tbl < 0 || tbl >= NUM_HUFF_TBLS) + ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tbl); + /* Allocate and zero the statistics tables */ + /* Note that jpeg_gen_optimal_table expects 257 entries in each table! */ + if (entropy->dc_count_ptrs[tbl] == NULL) + entropy->dc_count_ptrs[tbl] = (long *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + 257 * SIZEOF(long)); + MEMZERO(entropy->dc_count_ptrs[tbl], 257 * SIZEOF(long)); + } else { + /* Compute derived values for Huffman tables */ + /* We may do this more than once for a table, but it's not expensive */ + jpeg_make_c_derived_tbl(cinfo, TRUE, tbl, + & entropy->dc_derived_tbls[tbl]); + } + /* Initialize DC predictions to 0 */ + entropy->saved.last_dc_val[ci] = 0; + } + /* AC needs no table when not present */ + if (cinfo->Se) { + tbl = compptr->ac_tbl_no; + if (gather_statistics) { + if (tbl < 0 || tbl >= NUM_HUFF_TBLS) + ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tbl); + if (entropy->ac_count_ptrs[tbl] == NULL) + entropy->ac_count_ptrs[tbl] = (long *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + 257 * SIZEOF(long)); + MEMZERO(entropy->ac_count_ptrs[tbl], 257 * SIZEOF(long)); + } else { + jpeg_make_c_derived_tbl(cinfo, FALSE, tbl, + & entropy->ac_derived_tbls[tbl]); + } + } + } + + /* Initialize bit buffer to empty */ + entropy->saved.put_buffer = 0; + entropy->saved.put_bits = 0; + + /* Initialize restart stuff */ + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num = 0; +} + + +/* + * Module initialization routine for Huffman entropy encoding. + */ + +GLOBAL(void) +jinit_huff_encoder (j_compress_ptr cinfo) +{ + huff_entropy_ptr entropy; + int i; + + entropy = (huff_entropy_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(huff_entropy_encoder)); + cinfo->entropy = &entropy->pub; + entropy->pub.start_pass = start_pass_huff; + + /* Mark tables unallocated */ + for (i = 0; i < NUM_HUFF_TBLS; i++) { + entropy->dc_derived_tbls[i] = entropy->ac_derived_tbls[i] = NULL; + entropy->dc_count_ptrs[i] = entropy->ac_count_ptrs[i] = NULL; + } + + if (cinfo->progressive_mode) + entropy->bit_buffer = NULL; /* needed only in AC refinement scan */ +} diff --git a/compat/libjpeg/jcinit.c b/compat/libjpeg/jcinit.c new file mode 100755 index 0000000..397b488 --- /dev/null +++ b/compat/libjpeg/jcinit.c @@ -0,0 +1,84 @@ +/* + * jcinit.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 2003-2013 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains initialization logic for the JPEG compressor. + * This routine is in charge of selecting the modules to be executed and + * making an initialization call to each one. + * + * Logically, this code belongs in jcmaster.c. It's split out because + * linking this routine implies linking the entire compression library. + * For a transcoding-only application, we want to be able to use jcmaster.c + * without linking in the whole library. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * Master selection of compression modules. + * This is done once at the start of processing an image. We determine + * which modules will be used and give them appropriate initialization calls. + */ + +GLOBAL(void) +jinit_compress_master (j_compress_ptr cinfo) +{ + long samplesperrow; + JDIMENSION jd_samplesperrow; + + /* For now, precision must match compiled-in value... */ + if (cinfo->data_precision != BITS_IN_JSAMPLE) + ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision); + + /* Sanity check on image dimensions */ + if (cinfo->image_height <= 0 || cinfo->image_width <= 0 || + cinfo->input_components <= 0) + ERREXIT(cinfo, JERR_EMPTY_IMAGE); + + /* Width of an input scanline must be representable as JDIMENSION. */ + samplesperrow = (long) cinfo->image_width * (long) cinfo->input_components; + jd_samplesperrow = (JDIMENSION) samplesperrow; + if ((long) jd_samplesperrow != samplesperrow) + ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); + + /* Initialize master control (includes parameter checking/processing) */ + jinit_c_master_control(cinfo, FALSE /* full compression */); + + /* Preprocessing */ + if (! cinfo->raw_data_in) { + jinit_color_converter(cinfo); + jinit_downsampler(cinfo); + jinit_c_prep_controller(cinfo, FALSE /* never need full buffer here */); + } + /* Forward DCT */ + jinit_forward_dct(cinfo); + /* Entropy encoding: either Huffman or arithmetic coding. */ + if (cinfo->arith_code) + jinit_arith_encoder(cinfo); + else { + jinit_huff_encoder(cinfo); + } + + /* Need a full-image coefficient buffer in any multi-pass mode. */ + jinit_c_coef_controller(cinfo, + (boolean) (cinfo->num_scans > 1 || cinfo->optimize_coding)); + jinit_c_main_controller(cinfo, FALSE /* never need full buffer here */); + + jinit_marker_writer(cinfo); + + /* We can now tell the memory manager to allocate virtual arrays. */ + (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo); + + /* Write the datastream header (SOI) immediately. + * Frame and scan headers are postponed till later. + * This lets application insert special markers after the SOI. + */ + (*cinfo->marker->write_file_header) (cinfo); +} diff --git a/compat/libjpeg/jcmainct.c b/compat/libjpeg/jcmainct.c new file mode 100755 index 0000000..29d53a2 --- /dev/null +++ b/compat/libjpeg/jcmainct.c @@ -0,0 +1,297 @@ +/* + * jcmainct.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2003-2012 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the main buffer controller for compression. + * The main buffer lies between the pre-processor and the JPEG + * compressor proper; it holds downsampled data in the JPEG colorspace. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Note: currently, there is no operating mode in which a full-image buffer + * is needed at this step. If there were, that mode could not be used with + * "raw data" input, since this module is bypassed in that case. However, + * we've left the code here for possible use in special applications. + */ +#undef FULL_MAIN_BUFFER_SUPPORTED + + +/* Private buffer controller object */ + +typedef struct { + struct jpeg_c_main_controller pub; /* public fields */ + + JDIMENSION cur_iMCU_row; /* number of current iMCU row */ + JDIMENSION rowgroup_ctr; /* counts row groups received in iMCU row */ + boolean suspended; /* remember if we suspended output */ + J_BUF_MODE pass_mode; /* current operating mode */ + + /* If using just a strip buffer, this points to the entire set of buffers + * (we allocate one for each component). In the full-image case, this + * points to the currently accessible strips of the virtual arrays. + */ + JSAMPARRAY buffer[MAX_COMPONENTS]; + +#ifdef FULL_MAIN_BUFFER_SUPPORTED + /* If using full-image storage, this array holds pointers to virtual-array + * control blocks for each component. Unused if not full-image storage. + */ + jvirt_sarray_ptr whole_image[MAX_COMPONENTS]; +#endif +} my_main_controller; + +typedef my_main_controller * my_main_ptr; + + +/* Forward declarations */ +METHODDEF(void) process_data_simple_main + JPP((j_compress_ptr cinfo, JSAMPARRAY input_buf, + JDIMENSION *in_row_ctr, JDIMENSION in_rows_avail)); +#ifdef FULL_MAIN_BUFFER_SUPPORTED +METHODDEF(void) process_data_buffer_main + JPP((j_compress_ptr cinfo, JSAMPARRAY input_buf, + JDIMENSION *in_row_ctr, JDIMENSION in_rows_avail)); +#endif + + +/* + * Initialize for a processing pass. + */ + +METHODDEF(void) +start_pass_main (j_compress_ptr cinfo, J_BUF_MODE pass_mode) +{ + my_main_ptr mainp = (my_main_ptr) cinfo->main; + + /* Do nothing in raw-data mode. */ + if (cinfo->raw_data_in) + return; + + mainp->cur_iMCU_row = 0; /* initialize counters */ + mainp->rowgroup_ctr = 0; + mainp->suspended = FALSE; + mainp->pass_mode = pass_mode; /* save mode for use by process_data */ + + switch (pass_mode) { + case JBUF_PASS_THRU: +#ifdef FULL_MAIN_BUFFER_SUPPORTED + if (mainp->whole_image[0] != NULL) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); +#endif + mainp->pub.process_data = process_data_simple_main; + break; +#ifdef FULL_MAIN_BUFFER_SUPPORTED + case JBUF_SAVE_SOURCE: + case JBUF_CRANK_DEST: + case JBUF_SAVE_AND_PASS: + if (mainp->whole_image[0] == NULL) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + mainp->pub.process_data = process_data_buffer_main; + break; +#endif + default: + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + break; + } +} + + +/* + * Process some data. + * This routine handles the simple pass-through mode, + * where we have only a strip buffer. + */ + +METHODDEF(void) +process_data_simple_main (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, + JDIMENSION in_rows_avail) +{ + my_main_ptr mainp = (my_main_ptr) cinfo->main; + + while (mainp->cur_iMCU_row < cinfo->total_iMCU_rows) { + /* Read input data if we haven't filled the main buffer yet */ + if (mainp->rowgroup_ctr < (JDIMENSION) cinfo->min_DCT_v_scaled_size) + (*cinfo->prep->pre_process_data) (cinfo, + input_buf, in_row_ctr, in_rows_avail, + mainp->buffer, &mainp->rowgroup_ctr, + (JDIMENSION) cinfo->min_DCT_v_scaled_size); + + /* If we don't have a full iMCU row buffered, return to application for + * more data. Note that preprocessor will always pad to fill the iMCU row + * at the bottom of the image. + */ + if (mainp->rowgroup_ctr != (JDIMENSION) cinfo->min_DCT_v_scaled_size) + return; + + /* Send the completed row to the compressor */ + if (! (*cinfo->coef->compress_data) (cinfo, mainp->buffer)) { + /* If compressor did not consume the whole row, then we must need to + * suspend processing and return to the application. In this situation + * we pretend we didn't yet consume the last input row; otherwise, if + * it happened to be the last row of the image, the application would + * think we were done. + */ + if (! mainp->suspended) { + (*in_row_ctr)--; + mainp->suspended = TRUE; + } + return; + } + /* We did finish the row. Undo our little suspension hack if a previous + * call suspended; then mark the main buffer empty. + */ + if (mainp->suspended) { + (*in_row_ctr)++; + mainp->suspended = FALSE; + } + mainp->rowgroup_ctr = 0; + mainp->cur_iMCU_row++; + } +} + + +#ifdef FULL_MAIN_BUFFER_SUPPORTED + +/* + * Process some data. + * This routine handles all of the modes that use a full-size buffer. + */ + +METHODDEF(void) +process_data_buffer_main (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, + JDIMENSION in_rows_avail) +{ + my_main_ptr mainp = (my_main_ptr) cinfo->main; + int ci; + jpeg_component_info *compptr; + boolean writing = (mainp->pass_mode != JBUF_CRANK_DEST); + + while (mainp->cur_iMCU_row < cinfo->total_iMCU_rows) { + /* Realign the virtual buffers if at the start of an iMCU row. */ + if (mainp->rowgroup_ctr == 0) { + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + mainp->buffer[ci] = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, mainp->whole_image[ci], mainp->cur_iMCU_row * + ((JDIMENSION) (compptr->v_samp_factor * cinfo->min_DCT_v_scaled_size)), + (JDIMENSION) (compptr->v_samp_factor * cinfo->min_DCT_v_scaled_size), + writing); + } + /* In a read pass, pretend we just read some source data. */ + if (! writing) { + *in_row_ctr += (JDIMENSION) + (cinfo->max_v_samp_factor * cinfo->min_DCT_v_scaled_size); + mainp->rowgroup_ctr = (JDIMENSION) cinfo->min_DCT_v_scaled_size; + } + } + + /* If a write pass, read input data until the current iMCU row is full. */ + /* Note: preprocessor will pad if necessary to fill the last iMCU row. */ + if (writing) { + (*cinfo->prep->pre_process_data) (cinfo, + input_buf, in_row_ctr, in_rows_avail, + mainp->buffer, &mainp->rowgroup_ctr, + (JDIMENSION) cinfo->min_DCT_v_scaled_size); + /* Return to application if we need more data to fill the iMCU row. */ + if (mainp->rowgroup_ctr < (JDIMENSION) cinfo->min_DCT_v_scaled_size) + return; + } + + /* Emit data, unless this is a sink-only pass. */ + if (mainp->pass_mode != JBUF_SAVE_SOURCE) { + if (! (*cinfo->coef->compress_data) (cinfo, mainp->buffer)) { + /* If compressor did not consume the whole row, then we must need to + * suspend processing and return to the application. In this situation + * we pretend we didn't yet consume the last input row; otherwise, if + * it happened to be the last row of the image, the application would + * think we were done. + */ + if (! mainp->suspended) { + (*in_row_ctr)--; + mainp->suspended = TRUE; + } + return; + } + /* We did finish the row. Undo our little suspension hack if a previous + * call suspended; then mark the main buffer empty. + */ + if (mainp->suspended) { + (*in_row_ctr)++; + mainp->suspended = FALSE; + } + } + + /* If get here, we are done with this iMCU row. Mark buffer empty. */ + mainp->rowgroup_ctr = 0; + mainp->cur_iMCU_row++; + } +} + +#endif /* FULL_MAIN_BUFFER_SUPPORTED */ + + +/* + * Initialize main buffer controller. + */ + +GLOBAL(void) +jinit_c_main_controller (j_compress_ptr cinfo, boolean need_full_buffer) +{ + my_main_ptr mainp; + int ci; + jpeg_component_info *compptr; + + mainp = (my_main_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_main_controller)); + cinfo->main = &mainp->pub; + mainp->pub.start_pass = start_pass_main; + + /* We don't need to create a buffer in raw-data mode. */ + if (cinfo->raw_data_in) + return; + + /* Create the buffer. It holds downsampled data, so each component + * may be of a different size. + */ + if (need_full_buffer) { +#ifdef FULL_MAIN_BUFFER_SUPPORTED + /* Allocate a full-image virtual array for each component */ + /* Note we pad the bottom to a multiple of the iMCU height */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + mainp->whole_image[ci] = (*cinfo->mem->request_virt_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, + compptr->width_in_blocks * ((JDIMENSION) compptr->DCT_h_scaled_size), + ((JDIMENSION) jround_up((long) compptr->height_in_blocks, + (long) compptr->v_samp_factor)) * + ((JDIMENSION) cinfo->min_DCT_v_scaled_size), + (JDIMENSION) (compptr->v_samp_factor * compptr->DCT_v_scaled_size)); + } +#else + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); +#endif + } else { +#ifdef FULL_MAIN_BUFFER_SUPPORTED + mainp->whole_image[0] = NULL; /* flag for no virtual arrays */ +#endif + /* Allocate a strip buffer for each component */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + mainp->buffer[ci] = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + compptr->width_in_blocks * ((JDIMENSION) compptr->DCT_h_scaled_size), + (JDIMENSION) (compptr->v_samp_factor * compptr->DCT_v_scaled_size)); + } + } +} diff --git a/compat/libjpeg/jcmarker.c b/compat/libjpeg/jcmarker.c new file mode 100755 index 0000000..f2cd7a3 --- /dev/null +++ b/compat/libjpeg/jcmarker.c @@ -0,0 +1,719 @@ +/* + * jcmarker.c + * + * Copyright (C) 1991-1998, Thomas G. Lane. + * Modified 2003-2013 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to write JPEG datastream markers. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +typedef enum { /* JPEG marker codes */ + M_SOF0 = 0xc0, + M_SOF1 = 0xc1, + M_SOF2 = 0xc2, + M_SOF3 = 0xc3, + + M_SOF5 = 0xc5, + M_SOF6 = 0xc6, + M_SOF7 = 0xc7, + + M_JPG = 0xc8, + M_SOF9 = 0xc9, + M_SOF10 = 0xca, + M_SOF11 = 0xcb, + + M_SOF13 = 0xcd, + M_SOF14 = 0xce, + M_SOF15 = 0xcf, + + M_DHT = 0xc4, + + M_DAC = 0xcc, + + M_RST0 = 0xd0, + M_RST1 = 0xd1, + M_RST2 = 0xd2, + M_RST3 = 0xd3, + M_RST4 = 0xd4, + M_RST5 = 0xd5, + M_RST6 = 0xd6, + M_RST7 = 0xd7, + + M_SOI = 0xd8, + M_EOI = 0xd9, + M_SOS = 0xda, + M_DQT = 0xdb, + M_DNL = 0xdc, + M_DRI = 0xdd, + M_DHP = 0xde, + M_EXP = 0xdf, + + M_APP0 = 0xe0, + M_APP1 = 0xe1, + M_APP2 = 0xe2, + M_APP3 = 0xe3, + M_APP4 = 0xe4, + M_APP5 = 0xe5, + M_APP6 = 0xe6, + M_APP7 = 0xe7, + M_APP8 = 0xe8, + M_APP9 = 0xe9, + M_APP10 = 0xea, + M_APP11 = 0xeb, + M_APP12 = 0xec, + M_APP13 = 0xed, + M_APP14 = 0xee, + M_APP15 = 0xef, + + M_JPG0 = 0xf0, + M_JPG8 = 0xf8, + M_JPG13 = 0xfd, + M_COM = 0xfe, + + M_TEM = 0x01, + + M_ERROR = 0x100 +} JPEG_MARKER; + + +/* Private state */ + +typedef struct { + struct jpeg_marker_writer pub; /* public fields */ + + unsigned int last_restart_interval; /* last DRI value emitted; 0 after SOI */ +} my_marker_writer; + +typedef my_marker_writer * my_marker_ptr; + + +/* + * Basic output routines. + * + * Note that we do not support suspension while writing a marker. + * Therefore, an application using suspension must ensure that there is + * enough buffer space for the initial markers (typ. 600-700 bytes) before + * calling jpeg_start_compress, and enough space to write the trailing EOI + * (a few bytes) before calling jpeg_finish_compress. Multipass compression + * modes are not supported at all with suspension, so those two are the only + * points where markers will be written. + */ + +LOCAL(void) +emit_byte (j_compress_ptr cinfo, int val) +/* Emit a byte */ +{ + struct jpeg_destination_mgr * dest = cinfo->dest; + + *(dest->next_output_byte)++ = (JOCTET) val; + if (--dest->free_in_buffer == 0) { + if (! (*dest->empty_output_buffer) (cinfo)) + ERREXIT(cinfo, JERR_CANT_SUSPEND); + } +} + + +LOCAL(void) +emit_marker (j_compress_ptr cinfo, JPEG_MARKER mark) +/* Emit a marker code */ +{ + emit_byte(cinfo, 0xFF); + emit_byte(cinfo, (int) mark); +} + + +LOCAL(void) +emit_2bytes (j_compress_ptr cinfo, int value) +/* Emit a 2-byte integer; these are always MSB first in JPEG files */ +{ + emit_byte(cinfo, (value >> 8) & 0xFF); + emit_byte(cinfo, value & 0xFF); +} + + +/* + * Routines to write specific marker types. + */ + +LOCAL(int) +emit_dqt (j_compress_ptr cinfo, int index) +/* Emit a DQT marker */ +/* Returns the precision used (0 = 8bits, 1 = 16bits) for baseline checking */ +{ + JQUANT_TBL * qtbl = cinfo->quant_tbl_ptrs[index]; + int prec; + int i; + + if (qtbl == NULL) + ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, index); + + prec = 0; + for (i = 0; i <= cinfo->lim_Se; i++) { + if (qtbl->quantval[cinfo->natural_order[i]] > 255) + prec = 1; + } + + if (! qtbl->sent_table) { + emit_marker(cinfo, M_DQT); + + emit_2bytes(cinfo, + prec ? cinfo->lim_Se * 2 + 2 + 1 + 2 : cinfo->lim_Se + 1 + 1 + 2); + + emit_byte(cinfo, index + (prec<<4)); + + for (i = 0; i <= cinfo->lim_Se; i++) { + /* The table entries must be emitted in zigzag order. */ + unsigned int qval = qtbl->quantval[cinfo->natural_order[i]]; + if (prec) + emit_byte(cinfo, (int) (qval >> 8)); + emit_byte(cinfo, (int) (qval & 0xFF)); + } + + qtbl->sent_table = TRUE; + } + + return prec; +} + + +LOCAL(void) +emit_dht (j_compress_ptr cinfo, int index, boolean is_ac) +/* Emit a DHT marker */ +{ + JHUFF_TBL * htbl; + int length, i; + + if (is_ac) { + htbl = cinfo->ac_huff_tbl_ptrs[index]; + index += 0x10; /* output index has AC bit set */ + } else { + htbl = cinfo->dc_huff_tbl_ptrs[index]; + } + + if (htbl == NULL) + ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, index); + + if (! htbl->sent_table) { + emit_marker(cinfo, M_DHT); + + length = 0; + for (i = 1; i <= 16; i++) + length += htbl->bits[i]; + + emit_2bytes(cinfo, length + 2 + 1 + 16); + emit_byte(cinfo, index); + + for (i = 1; i <= 16; i++) + emit_byte(cinfo, htbl->bits[i]); + + for (i = 0; i < length; i++) + emit_byte(cinfo, htbl->huffval[i]); + + htbl->sent_table = TRUE; + } +} + + +LOCAL(void) +emit_dac (j_compress_ptr cinfo) +/* Emit a DAC marker */ +/* Since the useful info is so small, we want to emit all the tables in */ +/* one DAC marker. Therefore this routine does its own scan of the table. */ +{ +#ifdef C_ARITH_CODING_SUPPORTED + char dc_in_use[NUM_ARITH_TBLS]; + char ac_in_use[NUM_ARITH_TBLS]; + int length, i; + jpeg_component_info *compptr; + + for (i = 0; i < NUM_ARITH_TBLS; i++) + dc_in_use[i] = ac_in_use[i] = 0; + + for (i = 0; i < cinfo->comps_in_scan; i++) { + compptr = cinfo->cur_comp_info[i]; + /* DC needs no table for refinement scan */ + if (cinfo->Ss == 0 && cinfo->Ah == 0) + dc_in_use[compptr->dc_tbl_no] = 1; + /* AC needs no table when not present */ + if (cinfo->Se) + ac_in_use[compptr->ac_tbl_no] = 1; + } + + length = 0; + for (i = 0; i < NUM_ARITH_TBLS; i++) + length += dc_in_use[i] + ac_in_use[i]; + + if (length) { + emit_marker(cinfo, M_DAC); + + emit_2bytes(cinfo, length*2 + 2); + + for (i = 0; i < NUM_ARITH_TBLS; i++) { + if (dc_in_use[i]) { + emit_byte(cinfo, i); + emit_byte(cinfo, cinfo->arith_dc_L[i] + (cinfo->arith_dc_U[i]<<4)); + } + if (ac_in_use[i]) { + emit_byte(cinfo, i + 0x10); + emit_byte(cinfo, cinfo->arith_ac_K[i]); + } + } + } +#endif /* C_ARITH_CODING_SUPPORTED */ +} + + +LOCAL(void) +emit_dri (j_compress_ptr cinfo) +/* Emit a DRI marker */ +{ + emit_marker(cinfo, M_DRI); + + emit_2bytes(cinfo, 4); /* fixed length */ + + emit_2bytes(cinfo, (int) cinfo->restart_interval); +} + + +LOCAL(void) +emit_lse_ict (j_compress_ptr cinfo) +/* Emit an LSE inverse color transform specification marker */ +{ + /* Support only 1 transform */ + if (cinfo->color_transform != JCT_SUBTRACT_GREEN || + cinfo->num_components < 3) + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + + emit_marker(cinfo, M_JPG8); + + emit_2bytes(cinfo, 24); /* fixed length */ + + emit_byte(cinfo, 0x0D); /* ID inverse transform specification */ + emit_2bytes(cinfo, MAXJSAMPLE); /* MAXTRANS */ + emit_byte(cinfo, 3); /* Nt=3 */ + emit_byte(cinfo, cinfo->comp_info[1].component_id); + emit_byte(cinfo, cinfo->comp_info[0].component_id); + emit_byte(cinfo, cinfo->comp_info[2].component_id); + emit_byte(cinfo, 0x80); /* F1: CENTER1=1, NORM1=0 */ + emit_2bytes(cinfo, 0); /* A(1,1)=0 */ + emit_2bytes(cinfo, 0); /* A(1,2)=0 */ + emit_byte(cinfo, 0); /* F2: CENTER2=0, NORM2=0 */ + emit_2bytes(cinfo, 1); /* A(2,1)=1 */ + emit_2bytes(cinfo, 0); /* A(2,2)=0 */ + emit_byte(cinfo, 0); /* F3: CENTER3=0, NORM3=0 */ + emit_2bytes(cinfo, 1); /* A(3,1)=1 */ + emit_2bytes(cinfo, 0); /* A(3,2)=0 */ +} + + +LOCAL(void) +emit_sof (j_compress_ptr cinfo, JPEG_MARKER code) +/* Emit a SOF marker */ +{ + int ci; + jpeg_component_info *compptr; + + emit_marker(cinfo, code); + + emit_2bytes(cinfo, 3 * cinfo->num_components + 2 + 5 + 1); /* length */ + + /* Make sure image isn't bigger than SOF field can handle */ + if ((long) cinfo->jpeg_height > 65535L || + (long) cinfo->jpeg_width > 65535L) + ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) 65535); + + emit_byte(cinfo, cinfo->data_precision); + emit_2bytes(cinfo, (int) cinfo->jpeg_height); + emit_2bytes(cinfo, (int) cinfo->jpeg_width); + + emit_byte(cinfo, cinfo->num_components); + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + emit_byte(cinfo, compptr->component_id); + emit_byte(cinfo, (compptr->h_samp_factor << 4) + compptr->v_samp_factor); + emit_byte(cinfo, compptr->quant_tbl_no); + } +} + + +LOCAL(void) +emit_sos (j_compress_ptr cinfo) +/* Emit a SOS marker */ +{ + int i, td, ta; + jpeg_component_info *compptr; + + emit_marker(cinfo, M_SOS); + + emit_2bytes(cinfo, 2 * cinfo->comps_in_scan + 2 + 1 + 3); /* length */ + + emit_byte(cinfo, cinfo->comps_in_scan); + + for (i = 0; i < cinfo->comps_in_scan; i++) { + compptr = cinfo->cur_comp_info[i]; + emit_byte(cinfo, compptr->component_id); + + /* We emit 0 for unused field(s); this is recommended by the P&M text + * but does not seem to be specified in the standard. + */ + + /* DC needs no table for refinement scan */ + td = cinfo->Ss == 0 && cinfo->Ah == 0 ? compptr->dc_tbl_no : 0; + /* AC needs no table when not present */ + ta = cinfo->Se ? compptr->ac_tbl_no : 0; + + emit_byte(cinfo, (td << 4) + ta); + } + + emit_byte(cinfo, cinfo->Ss); + emit_byte(cinfo, cinfo->Se); + emit_byte(cinfo, (cinfo->Ah << 4) + cinfo->Al); +} + + +LOCAL(void) +emit_pseudo_sos (j_compress_ptr cinfo) +/* Emit a pseudo SOS marker */ +{ + emit_marker(cinfo, M_SOS); + + emit_2bytes(cinfo, 2 + 1 + 3); /* length */ + + emit_byte(cinfo, 0); /* Ns */ + + emit_byte(cinfo, 0); /* Ss */ + emit_byte(cinfo, cinfo->block_size * cinfo->block_size - 1); /* Se */ + emit_byte(cinfo, 0); /* Ah/Al */ +} + + +LOCAL(void) +emit_jfif_app0 (j_compress_ptr cinfo) +/* Emit a JFIF-compliant APP0 marker */ +{ + /* + * Length of APP0 block (2 bytes) + * Block ID (4 bytes - ASCII "JFIF") + * Zero byte (1 byte to terminate the ID string) + * Version Major, Minor (2 bytes - major first) + * Units (1 byte - 0x00 = none, 0x01 = inch, 0x02 = cm) + * Xdpu (2 bytes - dots per unit horizontal) + * Ydpu (2 bytes - dots per unit vertical) + * Thumbnail X size (1 byte) + * Thumbnail Y size (1 byte) + */ + + emit_marker(cinfo, M_APP0); + + emit_2bytes(cinfo, 2 + 4 + 1 + 2 + 1 + 2 + 2 + 1 + 1); /* length */ + + emit_byte(cinfo, 0x4A); /* Identifier: ASCII "JFIF" */ + emit_byte(cinfo, 0x46); + emit_byte(cinfo, 0x49); + emit_byte(cinfo, 0x46); + emit_byte(cinfo, 0); + emit_byte(cinfo, cinfo->JFIF_major_version); /* Version fields */ + emit_byte(cinfo, cinfo->JFIF_minor_version); + emit_byte(cinfo, cinfo->density_unit); /* Pixel size information */ + emit_2bytes(cinfo, (int) cinfo->X_density); + emit_2bytes(cinfo, (int) cinfo->Y_density); + emit_byte(cinfo, 0); /* No thumbnail image */ + emit_byte(cinfo, 0); +} + + +LOCAL(void) +emit_adobe_app14 (j_compress_ptr cinfo) +/* Emit an Adobe APP14 marker */ +{ + /* + * Length of APP14 block (2 bytes) + * Block ID (5 bytes - ASCII "Adobe") + * Version Number (2 bytes - currently 100) + * Flags0 (2 bytes - currently 0) + * Flags1 (2 bytes - currently 0) + * Color transform (1 byte) + * + * Although Adobe TN 5116 mentions Version = 101, all the Adobe files + * now in circulation seem to use Version = 100, so that's what we write. + * + * We write the color transform byte as 1 if the JPEG color space is + * YCbCr, 2 if it's YCCK, 0 otherwise. Adobe's definition has to do with + * whether the encoder performed a transformation, which is pretty useless. + */ + + emit_marker(cinfo, M_APP14); + + emit_2bytes(cinfo, 2 + 5 + 2 + 2 + 2 + 1); /* length */ + + emit_byte(cinfo, 0x41); /* Identifier: ASCII "Adobe" */ + emit_byte(cinfo, 0x64); + emit_byte(cinfo, 0x6F); + emit_byte(cinfo, 0x62); + emit_byte(cinfo, 0x65); + emit_2bytes(cinfo, 100); /* Version */ + emit_2bytes(cinfo, 0); /* Flags0 */ + emit_2bytes(cinfo, 0); /* Flags1 */ + switch (cinfo->jpeg_color_space) { + case JCS_YCbCr: + emit_byte(cinfo, 1); /* Color transform = 1 */ + break; + case JCS_YCCK: + emit_byte(cinfo, 2); /* Color transform = 2 */ + break; + default: + emit_byte(cinfo, 0); /* Color transform = 0 */ + break; + } +} + + +/* + * These routines allow writing an arbitrary marker with parameters. + * The only intended use is to emit COM or APPn markers after calling + * write_file_header and before calling write_frame_header. + * Other uses are not guaranteed to produce desirable results. + * Counting the parameter bytes properly is the caller's responsibility. + */ + +METHODDEF(void) +write_marker_header (j_compress_ptr cinfo, int marker, unsigned int datalen) +/* Emit an arbitrary marker header */ +{ + if (datalen > (unsigned int) 65533) /* safety check */ + ERREXIT(cinfo, JERR_BAD_LENGTH); + + emit_marker(cinfo, (JPEG_MARKER) marker); + + emit_2bytes(cinfo, (int) (datalen + 2)); /* total length */ +} + +METHODDEF(void) +write_marker_byte (j_compress_ptr cinfo, int val) +/* Emit one byte of marker parameters following write_marker_header */ +{ + emit_byte(cinfo, val); +} + + +/* + * Write datastream header. + * This consists of an SOI and optional APPn markers. + * We recommend use of the JFIF marker, but not the Adobe marker, + * when using YCbCr or grayscale data. The JFIF marker is also used + * for other standard JPEG colorspaces. The Adobe marker is helpful + * to distinguish RGB, CMYK, and YCCK colorspaces. + * Note that an application can write additional header markers after + * jpeg_start_compress returns. + */ + +METHODDEF(void) +write_file_header (j_compress_ptr cinfo) +{ + my_marker_ptr marker = (my_marker_ptr) cinfo->marker; + + emit_marker(cinfo, M_SOI); /* first the SOI */ + + /* SOI is defined to reset restart interval to 0 */ + marker->last_restart_interval = 0; + + if (cinfo->write_JFIF_header) /* next an optional JFIF APP0 */ + emit_jfif_app0(cinfo); + if (cinfo->write_Adobe_marker) /* next an optional Adobe APP14 */ + emit_adobe_app14(cinfo); +} + + +/* + * Write frame header. + * This consists of DQT and SOFn markers, + * a conditional LSE marker and a conditional pseudo SOS marker. + * Note that we do not emit the SOF until we have emitted the DQT(s). + * This avoids compatibility problems with incorrect implementations that + * try to error-check the quant table numbers as soon as they see the SOF. + */ + +METHODDEF(void) +write_frame_header (j_compress_ptr cinfo) +{ + int ci, prec; + boolean is_baseline; + jpeg_component_info *compptr; + + /* Emit DQT for each quantization table. + * Note that emit_dqt() suppresses any duplicate tables. + */ + prec = 0; + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + prec += emit_dqt(cinfo, compptr->quant_tbl_no); + } + /* now prec is nonzero iff there are any 16-bit quant tables. */ + + /* Check for a non-baseline specification. + * Note we assume that Huffman table numbers won't be changed later. + */ + if (cinfo->arith_code || cinfo->progressive_mode || + cinfo->data_precision != 8 || cinfo->block_size != DCTSIZE) { + is_baseline = FALSE; + } else { + is_baseline = TRUE; + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + if (compptr->dc_tbl_no > 1 || compptr->ac_tbl_no > 1) + is_baseline = FALSE; + } + if (prec && is_baseline) { + is_baseline = FALSE; + /* If it's baseline except for quantizer size, warn the user */ + TRACEMS(cinfo, 0, JTRC_16BIT_TABLES); + } + } + + /* Emit the proper SOF marker */ + if (cinfo->arith_code) { + if (cinfo->progressive_mode) + emit_sof(cinfo, M_SOF10); /* SOF code for progressive arithmetic */ + else + emit_sof(cinfo, M_SOF9); /* SOF code for sequential arithmetic */ + } else { + if (cinfo->progressive_mode) + emit_sof(cinfo, M_SOF2); /* SOF code for progressive Huffman */ + else if (is_baseline) + emit_sof(cinfo, M_SOF0); /* SOF code for baseline implementation */ + else + emit_sof(cinfo, M_SOF1); /* SOF code for non-baseline Huffman file */ + } + + /* Check to emit LSE inverse color transform specification marker */ + if (cinfo->color_transform) + emit_lse_ict(cinfo); + + /* Check to emit pseudo SOS marker */ + if (cinfo->progressive_mode && cinfo->block_size != DCTSIZE) + emit_pseudo_sos(cinfo); +} + + +/* + * Write scan header. + * This consists of DHT or DAC markers, optional DRI, and SOS. + * Compressed data will be written following the SOS. + */ + +METHODDEF(void) +write_scan_header (j_compress_ptr cinfo) +{ + my_marker_ptr marker = (my_marker_ptr) cinfo->marker; + int i; + jpeg_component_info *compptr; + + if (cinfo->arith_code) { + /* Emit arith conditioning info. We may have some duplication + * if the file has multiple scans, but it's so small it's hardly + * worth worrying about. + */ + emit_dac(cinfo); + } else { + /* Emit Huffman tables. + * Note that emit_dht() suppresses any duplicate tables. + */ + for (i = 0; i < cinfo->comps_in_scan; i++) { + compptr = cinfo->cur_comp_info[i]; + /* DC needs no table for refinement scan */ + if (cinfo->Ss == 0 && cinfo->Ah == 0) + emit_dht(cinfo, compptr->dc_tbl_no, FALSE); + /* AC needs no table when not present */ + if (cinfo->Se) + emit_dht(cinfo, compptr->ac_tbl_no, TRUE); + } + } + + /* Emit DRI if required --- note that DRI value could change for each scan. + * We avoid wasting space with unnecessary DRIs, however. + */ + if (cinfo->restart_interval != marker->last_restart_interval) { + emit_dri(cinfo); + marker->last_restart_interval = cinfo->restart_interval; + } + + emit_sos(cinfo); +} + + +/* + * Write datastream trailer. + */ + +METHODDEF(void) +write_file_trailer (j_compress_ptr cinfo) +{ + emit_marker(cinfo, M_EOI); +} + + +/* + * Write an abbreviated table-specification datastream. + * This consists of SOI, DQT and DHT tables, and EOI. + * Any table that is defined and not marked sent_table = TRUE will be + * emitted. Note that all tables will be marked sent_table = TRUE at exit. + */ + +METHODDEF(void) +write_tables_only (j_compress_ptr cinfo) +{ + int i; + + emit_marker(cinfo, M_SOI); + + for (i = 0; i < NUM_QUANT_TBLS; i++) { + if (cinfo->quant_tbl_ptrs[i] != NULL) + (void) emit_dqt(cinfo, i); + } + + if (! cinfo->arith_code) { + for (i = 0; i < NUM_HUFF_TBLS; i++) { + if (cinfo->dc_huff_tbl_ptrs[i] != NULL) + emit_dht(cinfo, i, FALSE); + if (cinfo->ac_huff_tbl_ptrs[i] != NULL) + emit_dht(cinfo, i, TRUE); + } + } + + emit_marker(cinfo, M_EOI); +} + + +/* + * Initialize the marker writer module. + */ + +GLOBAL(void) +jinit_marker_writer (j_compress_ptr cinfo) +{ + my_marker_ptr marker; + + /* Create the subobject */ + marker = (my_marker_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_marker_writer)); + cinfo->marker = &marker->pub; + /* Initialize method pointers */ + marker->pub.write_file_header = write_file_header; + marker->pub.write_frame_header = write_frame_header; + marker->pub.write_scan_header = write_scan_header; + marker->pub.write_file_trailer = write_file_trailer; + marker->pub.write_tables_only = write_tables_only; + marker->pub.write_marker_header = write_marker_header; + marker->pub.write_marker_byte = write_marker_byte; + /* Initialize private state */ + marker->last_restart_interval = 0; +} diff --git a/compat/libjpeg/jcmaster.c b/compat/libjpeg/jcmaster.c new file mode 100755 index 0000000..431744e --- /dev/null +++ b/compat/libjpeg/jcmaster.c @@ -0,0 +1,856 @@ +/* + * jcmaster.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 2003-2013 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains master control logic for the JPEG compressor. + * These routines are concerned with parameter validation, initial setup, + * and inter-pass control (determining the number of passes and the work + * to be done in each pass). + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Private state */ + +typedef enum { + main_pass, /* input data, also do first output step */ + huff_opt_pass, /* Huffman code optimization pass */ + output_pass /* data output pass */ +} c_pass_type; + +typedef struct { + struct jpeg_comp_master pub; /* public fields */ + + c_pass_type pass_type; /* the type of the current pass */ + + int pass_number; /* # of passes completed */ + int total_passes; /* total # of passes needed */ + + int scan_number; /* current index in scan_info[] */ +} my_comp_master; + +typedef my_comp_master * my_master_ptr; + + +/* + * Support routines that do various essential calculations. + */ + +/* + * Compute JPEG image dimensions and related values. + * NOTE: this is exported for possible use by application. + * Hence it mustn't do anything that can't be done twice. + */ + +GLOBAL(void) +jpeg_calc_jpeg_dimensions (j_compress_ptr cinfo) +/* Do computations that are needed before master selection phase */ +{ +#ifdef DCT_SCALING_SUPPORTED + + /* Sanity check on input image dimensions to prevent overflow in + * following calculation. + * We do check jpeg_width and jpeg_height in initial_setup below, + * but image_width and image_height can come from arbitrary data, + * and we need some space for multiplication by block_size. + */ + if (((long) cinfo->image_width >> 24) || ((long) cinfo->image_height >> 24)) + ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION); + + /* Compute actual JPEG image dimensions and DCT scaling choices. */ + if (cinfo->scale_num >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/1 scaling */ + cinfo->jpeg_width = cinfo->image_width * cinfo->block_size; + cinfo->jpeg_height = cinfo->image_height * cinfo->block_size; + cinfo->min_DCT_h_scaled_size = 1; + cinfo->min_DCT_v_scaled_size = 1; + } else if (cinfo->scale_num * 2 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/2 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 2L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 2L); + cinfo->min_DCT_h_scaled_size = 2; + cinfo->min_DCT_v_scaled_size = 2; + } else if (cinfo->scale_num * 3 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/3 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 3L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 3L); + cinfo->min_DCT_h_scaled_size = 3; + cinfo->min_DCT_v_scaled_size = 3; + } else if (cinfo->scale_num * 4 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/4 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 4L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 4L); + cinfo->min_DCT_h_scaled_size = 4; + cinfo->min_DCT_v_scaled_size = 4; + } else if (cinfo->scale_num * 5 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/5 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 5L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 5L); + cinfo->min_DCT_h_scaled_size = 5; + cinfo->min_DCT_v_scaled_size = 5; + } else if (cinfo->scale_num * 6 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/6 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 6L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 6L); + cinfo->min_DCT_h_scaled_size = 6; + cinfo->min_DCT_v_scaled_size = 6; + } else if (cinfo->scale_num * 7 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/7 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 7L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 7L); + cinfo->min_DCT_h_scaled_size = 7; + cinfo->min_DCT_v_scaled_size = 7; + } else if (cinfo->scale_num * 8 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/8 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 8L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 8L); + cinfo->min_DCT_h_scaled_size = 8; + cinfo->min_DCT_v_scaled_size = 8; + } else if (cinfo->scale_num * 9 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/9 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 9L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 9L); + cinfo->min_DCT_h_scaled_size = 9; + cinfo->min_DCT_v_scaled_size = 9; + } else if (cinfo->scale_num * 10 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/10 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 10L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 10L); + cinfo->min_DCT_h_scaled_size = 10; + cinfo->min_DCT_v_scaled_size = 10; + } else if (cinfo->scale_num * 11 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/11 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 11L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 11L); + cinfo->min_DCT_h_scaled_size = 11; + cinfo->min_DCT_v_scaled_size = 11; + } else if (cinfo->scale_num * 12 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/12 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 12L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 12L); + cinfo->min_DCT_h_scaled_size = 12; + cinfo->min_DCT_v_scaled_size = 12; + } else if (cinfo->scale_num * 13 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/13 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 13L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 13L); + cinfo->min_DCT_h_scaled_size = 13; + cinfo->min_DCT_v_scaled_size = 13; + } else if (cinfo->scale_num * 14 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/14 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 14L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 14L); + cinfo->min_DCT_h_scaled_size = 14; + cinfo->min_DCT_v_scaled_size = 14; + } else if (cinfo->scale_num * 15 >= cinfo->scale_denom * cinfo->block_size) { + /* Provide block_size/15 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 15L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 15L); + cinfo->min_DCT_h_scaled_size = 15; + cinfo->min_DCT_v_scaled_size = 15; + } else { + /* Provide block_size/16 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 16L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 16L); + cinfo->min_DCT_h_scaled_size = 16; + cinfo->min_DCT_v_scaled_size = 16; + } + +#else /* !DCT_SCALING_SUPPORTED */ + + /* Hardwire it to "no scaling" */ + cinfo->jpeg_width = cinfo->image_width; + cinfo->jpeg_height = cinfo->image_height; + cinfo->min_DCT_h_scaled_size = DCTSIZE; + cinfo->min_DCT_v_scaled_size = DCTSIZE; + +#endif /* DCT_SCALING_SUPPORTED */ +} + + +LOCAL(void) +jpeg_calc_trans_dimensions (j_compress_ptr cinfo) +{ + if (cinfo->min_DCT_h_scaled_size != cinfo->min_DCT_v_scaled_size) + ERREXIT2(cinfo, JERR_BAD_DCTSIZE, + cinfo->min_DCT_h_scaled_size, cinfo->min_DCT_v_scaled_size); + + cinfo->block_size = cinfo->min_DCT_h_scaled_size; +} + + +LOCAL(void) +initial_setup (j_compress_ptr cinfo, boolean transcode_only) +/* Do computations that are needed before master selection phase */ +{ + int ci, ssize; + jpeg_component_info *compptr; + + if (transcode_only) + jpeg_calc_trans_dimensions(cinfo); + else + jpeg_calc_jpeg_dimensions(cinfo); + + /* Sanity check on block_size */ + if (cinfo->block_size < 1 || cinfo->block_size > 16) + ERREXIT2(cinfo, JERR_BAD_DCTSIZE, cinfo->block_size, cinfo->block_size); + + /* Derive natural_order from block_size */ + switch (cinfo->block_size) { + case 2: cinfo->natural_order = jpeg_natural_order2; break; + case 3: cinfo->natural_order = jpeg_natural_order3; break; + case 4: cinfo->natural_order = jpeg_natural_order4; break; + case 5: cinfo->natural_order = jpeg_natural_order5; break; + case 6: cinfo->natural_order = jpeg_natural_order6; break; + case 7: cinfo->natural_order = jpeg_natural_order7; break; + default: cinfo->natural_order = jpeg_natural_order; break; + } + + /* Derive lim_Se from block_size */ + cinfo->lim_Se = cinfo->block_size < DCTSIZE ? + cinfo->block_size * cinfo->block_size - 1 : DCTSIZE2-1; + + /* Sanity check on image dimensions */ + if (cinfo->jpeg_height <= 0 || cinfo->jpeg_width <= 0 || + cinfo->num_components <= 0) + ERREXIT(cinfo, JERR_EMPTY_IMAGE); + + /* Make sure image isn't bigger than I can handle */ + if ((long) cinfo->jpeg_height > (long) JPEG_MAX_DIMENSION || + (long) cinfo->jpeg_width > (long) JPEG_MAX_DIMENSION) + ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION); + + /* Only 8 to 12 bits data precision are supported for DCT based JPEG */ + if (cinfo->data_precision < 8 || cinfo->data_precision > 12) + ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision); + + /* Check that number of components won't exceed internal array sizes */ + if (cinfo->num_components > MAX_COMPONENTS) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, + MAX_COMPONENTS); + + /* Compute maximum sampling factors; check factor validity */ + cinfo->max_h_samp_factor = 1; + cinfo->max_v_samp_factor = 1; + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + if (compptr->h_samp_factor<=0 || compptr->h_samp_factor>MAX_SAMP_FACTOR || + compptr->v_samp_factor<=0 || compptr->v_samp_factor>MAX_SAMP_FACTOR) + ERREXIT(cinfo, JERR_BAD_SAMPLING); + cinfo->max_h_samp_factor = MAX(cinfo->max_h_samp_factor, + compptr->h_samp_factor); + cinfo->max_v_samp_factor = MAX(cinfo->max_v_samp_factor, + compptr->v_samp_factor); + } + + /* Compute dimensions of components */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Fill in the correct component_index value; don't rely on application */ + compptr->component_index = ci; + /* In selecting the actual DCT scaling for each component, we try to + * scale down the chroma components via DCT scaling rather than downsampling. + * This saves time if the downsampler gets to use 1:1 scaling. + * Note this code adapts subsampling ratios which are powers of 2. + */ + ssize = 1; +#ifdef DCT_SCALING_SUPPORTED + while (cinfo->min_DCT_h_scaled_size * ssize <= + (cinfo->do_fancy_downsampling ? DCTSIZE : DCTSIZE / 2) && + (cinfo->max_h_samp_factor % (compptr->h_samp_factor * ssize * 2)) == 0) { + ssize = ssize * 2; + } +#endif + compptr->DCT_h_scaled_size = cinfo->min_DCT_h_scaled_size * ssize; + ssize = 1; +#ifdef DCT_SCALING_SUPPORTED + while (cinfo->min_DCT_v_scaled_size * ssize <= + (cinfo->do_fancy_downsampling ? DCTSIZE : DCTSIZE / 2) && + (cinfo->max_v_samp_factor % (compptr->v_samp_factor * ssize * 2)) == 0) { + ssize = ssize * 2; + } +#endif + compptr->DCT_v_scaled_size = cinfo->min_DCT_v_scaled_size * ssize; + + /* We don't support DCT ratios larger than 2. */ + if (compptr->DCT_h_scaled_size > compptr->DCT_v_scaled_size * 2) + compptr->DCT_h_scaled_size = compptr->DCT_v_scaled_size * 2; + else if (compptr->DCT_v_scaled_size > compptr->DCT_h_scaled_size * 2) + compptr->DCT_v_scaled_size = compptr->DCT_h_scaled_size * 2; + + /* Size in DCT blocks */ + compptr->width_in_blocks = (JDIMENSION) + jdiv_round_up((long) cinfo->jpeg_width * (long) compptr->h_samp_factor, + (long) (cinfo->max_h_samp_factor * cinfo->block_size)); + compptr->height_in_blocks = (JDIMENSION) + jdiv_round_up((long) cinfo->jpeg_height * (long) compptr->v_samp_factor, + (long) (cinfo->max_v_samp_factor * cinfo->block_size)); + /* Size in samples */ + compptr->downsampled_width = (JDIMENSION) + jdiv_round_up((long) cinfo->jpeg_width * + (long) (compptr->h_samp_factor * compptr->DCT_h_scaled_size), + (long) (cinfo->max_h_samp_factor * cinfo->block_size)); + compptr->downsampled_height = (JDIMENSION) + jdiv_round_up((long) cinfo->jpeg_height * + (long) (compptr->v_samp_factor * compptr->DCT_v_scaled_size), + (long) (cinfo->max_v_samp_factor * cinfo->block_size)); + /* Don't need quantization scale after DCT, + * until color conversion says otherwise. + */ + compptr->component_needed = FALSE; + } + + /* Compute number of fully interleaved MCU rows (number of times that + * main controller will call coefficient controller). + */ + cinfo->total_iMCU_rows = (JDIMENSION) + jdiv_round_up((long) cinfo->jpeg_height, + (long) (cinfo->max_v_samp_factor * cinfo->block_size)); +} + + +#ifdef C_MULTISCAN_FILES_SUPPORTED + +LOCAL(void) +validate_script (j_compress_ptr cinfo) +/* Verify that the scan script in cinfo->scan_info[] is valid; also + * determine whether it uses progressive JPEG, and set cinfo->progressive_mode. + */ +{ + const jpeg_scan_info * scanptr; + int scanno, ncomps, ci, coefi, thisi; + int Ss, Se, Ah, Al; + boolean component_sent[MAX_COMPONENTS]; +#ifdef C_PROGRESSIVE_SUPPORTED + int * last_bitpos_ptr; + int last_bitpos[MAX_COMPONENTS][DCTSIZE2]; + /* -1 until that coefficient has been seen; then last Al for it */ +#endif + + if (cinfo->num_scans <= 0) + ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, 0); + + /* For sequential JPEG, all scans must have Ss=0, Se=DCTSIZE2-1; + * for progressive JPEG, no scan can have this. + */ + scanptr = cinfo->scan_info; + if (scanptr->Ss != 0 || scanptr->Se != DCTSIZE2-1) { +#ifdef C_PROGRESSIVE_SUPPORTED + cinfo->progressive_mode = TRUE; + last_bitpos_ptr = & last_bitpos[0][0]; + for (ci = 0; ci < cinfo->num_components; ci++) + for (coefi = 0; coefi < DCTSIZE2; coefi++) + *last_bitpos_ptr++ = -1; +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } else { + cinfo->progressive_mode = FALSE; + for (ci = 0; ci < cinfo->num_components; ci++) + component_sent[ci] = FALSE; + } + + for (scanno = 1; scanno <= cinfo->num_scans; scanptr++, scanno++) { + /* Validate component indexes */ + ncomps = scanptr->comps_in_scan; + if (ncomps <= 0 || ncomps > MAX_COMPS_IN_SCAN) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, ncomps, MAX_COMPS_IN_SCAN); + for (ci = 0; ci < ncomps; ci++) { + thisi = scanptr->component_index[ci]; + if (thisi < 0 || thisi >= cinfo->num_components) + ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno); + /* Components must appear in SOF order within each scan */ + if (ci > 0 && thisi <= scanptr->component_index[ci-1]) + ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno); + } + /* Validate progression parameters */ + Ss = scanptr->Ss; + Se = scanptr->Se; + Ah = scanptr->Ah; + Al = scanptr->Al; + if (cinfo->progressive_mode) { +#ifdef C_PROGRESSIVE_SUPPORTED + /* The JPEG spec simply gives the ranges 0..13 for Ah and Al, but that + * seems wrong: the upper bound ought to depend on data precision. + * Perhaps they really meant 0..N+1 for N-bit precision. + * Here we allow 0..10 for 8-bit data; Al larger than 10 results in + * out-of-range reconstructed DC values during the first DC scan, + * which might cause problems for some decoders. + */ +#if BITS_IN_JSAMPLE == 8 +#define MAX_AH_AL 10 +#else +#define MAX_AH_AL 13 +#endif + if (Ss < 0 || Ss >= DCTSIZE2 || Se < Ss || Se >= DCTSIZE2 || + Ah < 0 || Ah > MAX_AH_AL || Al < 0 || Al > MAX_AH_AL) + ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); + if (Ss == 0) { + if (Se != 0) /* DC and AC together not OK */ + ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); + } else { + if (ncomps != 1) /* AC scans must be for only one component */ + ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); + } + for (ci = 0; ci < ncomps; ci++) { + last_bitpos_ptr = & last_bitpos[scanptr->component_index[ci]][0]; + if (Ss != 0 && last_bitpos_ptr[0] < 0) /* AC without prior DC scan */ + ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); + for (coefi = Ss; coefi <= Se; coefi++) { + if (last_bitpos_ptr[coefi] < 0) { + /* first scan of this coefficient */ + if (Ah != 0) + ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); + } else { + /* not first scan */ + if (Ah != last_bitpos_ptr[coefi] || Al != Ah-1) + ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); + } + last_bitpos_ptr[coefi] = Al; + } + } +#endif + } else { + /* For sequential JPEG, all progression parameters must be these: */ + if (Ss != 0 || Se != DCTSIZE2-1 || Ah != 0 || Al != 0) + ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); + /* Make sure components are not sent twice */ + for (ci = 0; ci < ncomps; ci++) { + thisi = scanptr->component_index[ci]; + if (component_sent[thisi]) + ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno); + component_sent[thisi] = TRUE; + } + } + } + + /* Now verify that everything got sent. */ + if (cinfo->progressive_mode) { +#ifdef C_PROGRESSIVE_SUPPORTED + /* For progressive mode, we only check that at least some DC data + * got sent for each component; the spec does not require that all bits + * of all coefficients be transmitted. Would it be wiser to enforce + * transmission of all coefficient bits?? + */ + for (ci = 0; ci < cinfo->num_components; ci++) { + if (last_bitpos[ci][0] < 0) + ERREXIT(cinfo, JERR_MISSING_DATA); + } +#endif + } else { + for (ci = 0; ci < cinfo->num_components; ci++) { + if (! component_sent[ci]) + ERREXIT(cinfo, JERR_MISSING_DATA); + } + } +} + + +LOCAL(void) +reduce_script (j_compress_ptr cinfo) +/* Adapt scan script for use with reduced block size; + * assume that script has been validated before. + */ +{ + jpeg_scan_info * scanptr; + int idxout, idxin; + + /* Circumvent const declaration for this function */ + scanptr = (jpeg_scan_info *) cinfo->scan_info; + idxout = 0; + + for (idxin = 0; idxin < cinfo->num_scans; idxin++) { + /* After skipping, idxout becomes smaller than idxin */ + if (idxin != idxout) + /* Copy rest of data; + * note we stay in given chunk of allocated memory. + */ + scanptr[idxout] = scanptr[idxin]; + if (scanptr[idxout].Ss > cinfo->lim_Se) + /* Entire scan out of range - skip this entry */ + continue; + if (scanptr[idxout].Se > cinfo->lim_Se) + /* Limit scan to end of block */ + scanptr[idxout].Se = cinfo->lim_Se; + idxout++; + } + + cinfo->num_scans = idxout; +} + +#endif /* C_MULTISCAN_FILES_SUPPORTED */ + + +LOCAL(void) +select_scan_parameters (j_compress_ptr cinfo) +/* Set up the scan parameters for the current scan */ +{ + int ci; + +#ifdef C_MULTISCAN_FILES_SUPPORTED + if (cinfo->scan_info != NULL) { + /* Prepare for current scan --- the script is already validated */ + my_master_ptr master = (my_master_ptr) cinfo->master; + const jpeg_scan_info * scanptr = cinfo->scan_info + master->scan_number; + + cinfo->comps_in_scan = scanptr->comps_in_scan; + for (ci = 0; ci < scanptr->comps_in_scan; ci++) { + cinfo->cur_comp_info[ci] = + &cinfo->comp_info[scanptr->component_index[ci]]; + } + if (cinfo->progressive_mode) { + cinfo->Ss = scanptr->Ss; + cinfo->Se = scanptr->Se; + cinfo->Ah = scanptr->Ah; + cinfo->Al = scanptr->Al; + return; + } + } + else +#endif + { + /* Prepare for single sequential-JPEG scan containing all components */ + if (cinfo->num_components > MAX_COMPS_IN_SCAN) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, + MAX_COMPS_IN_SCAN); + cinfo->comps_in_scan = cinfo->num_components; + for (ci = 0; ci < cinfo->num_components; ci++) { + cinfo->cur_comp_info[ci] = &cinfo->comp_info[ci]; + } + } + cinfo->Ss = 0; + cinfo->Se = cinfo->block_size * cinfo->block_size - 1; + cinfo->Ah = 0; + cinfo->Al = 0; +} + + +LOCAL(void) +per_scan_setup (j_compress_ptr cinfo) +/* Do computations that are needed before processing a JPEG scan */ +/* cinfo->comps_in_scan and cinfo->cur_comp_info[] are already set */ +{ + int ci, mcublks, tmp; + jpeg_component_info *compptr; + + if (cinfo->comps_in_scan == 1) { + + /* Noninterleaved (single-component) scan */ + compptr = cinfo->cur_comp_info[0]; + + /* Overall image size in MCUs */ + cinfo->MCUs_per_row = compptr->width_in_blocks; + cinfo->MCU_rows_in_scan = compptr->height_in_blocks; + + /* For noninterleaved scan, always one block per MCU */ + compptr->MCU_width = 1; + compptr->MCU_height = 1; + compptr->MCU_blocks = 1; + compptr->MCU_sample_width = compptr->DCT_h_scaled_size; + compptr->last_col_width = 1; + /* For noninterleaved scans, it is convenient to define last_row_height + * as the number of block rows present in the last iMCU row. + */ + tmp = (int) (compptr->height_in_blocks % compptr->v_samp_factor); + if (tmp == 0) tmp = compptr->v_samp_factor; + compptr->last_row_height = tmp; + + /* Prepare array describing MCU composition */ + cinfo->blocks_in_MCU = 1; + cinfo->MCU_membership[0] = 0; + + } else { + + /* Interleaved (multi-component) scan */ + if (cinfo->comps_in_scan <= 0 || cinfo->comps_in_scan > MAX_COMPS_IN_SCAN) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->comps_in_scan, + MAX_COMPS_IN_SCAN); + + /* Overall image size in MCUs */ + cinfo->MCUs_per_row = (JDIMENSION) + jdiv_round_up((long) cinfo->jpeg_width, + (long) (cinfo->max_h_samp_factor * cinfo->block_size)); + cinfo->MCU_rows_in_scan = (JDIMENSION) + jdiv_round_up((long) cinfo->jpeg_height, + (long) (cinfo->max_v_samp_factor * cinfo->block_size)); + + cinfo->blocks_in_MCU = 0; + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* Sampling factors give # of blocks of component in each MCU */ + compptr->MCU_width = compptr->h_samp_factor; + compptr->MCU_height = compptr->v_samp_factor; + compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height; + compptr->MCU_sample_width = compptr->MCU_width * compptr->DCT_h_scaled_size; + /* Figure number of non-dummy blocks in last MCU column & row */ + tmp = (int) (compptr->width_in_blocks % compptr->MCU_width); + if (tmp == 0) tmp = compptr->MCU_width; + compptr->last_col_width = tmp; + tmp = (int) (compptr->height_in_blocks % compptr->MCU_height); + if (tmp == 0) tmp = compptr->MCU_height; + compptr->last_row_height = tmp; + /* Prepare array describing MCU composition */ + mcublks = compptr->MCU_blocks; + if (cinfo->blocks_in_MCU + mcublks > C_MAX_BLOCKS_IN_MCU) + ERREXIT(cinfo, JERR_BAD_MCU_SIZE); + while (mcublks-- > 0) { + cinfo->MCU_membership[cinfo->blocks_in_MCU++] = ci; + } + } + + } + + /* Convert restart specified in rows to actual MCU count. */ + /* Note that count must fit in 16 bits, so we provide limiting. */ + if (cinfo->restart_in_rows > 0) { + long nominal = (long) cinfo->restart_in_rows * (long) cinfo->MCUs_per_row; + cinfo->restart_interval = (unsigned int) MIN(nominal, 65535L); + } +} + + +/* + * Per-pass setup. + * This is called at the beginning of each pass. We determine which modules + * will be active during this pass and give them appropriate start_pass calls. + * We also set is_last_pass to indicate whether any more passes will be + * required. + */ + +METHODDEF(void) +prepare_for_pass (j_compress_ptr cinfo) +{ + my_master_ptr master = (my_master_ptr) cinfo->master; + + switch (master->pass_type) { + case main_pass: + /* Initial pass: will collect input data, and do either Huffman + * optimization or data output for the first scan. + */ + select_scan_parameters(cinfo); + per_scan_setup(cinfo); + if (! cinfo->raw_data_in) { + (*cinfo->cconvert->start_pass) (cinfo); + (*cinfo->downsample->start_pass) (cinfo); + (*cinfo->prep->start_pass) (cinfo, JBUF_PASS_THRU); + } + (*cinfo->fdct->start_pass) (cinfo); + (*cinfo->entropy->start_pass) (cinfo, cinfo->optimize_coding); + (*cinfo->coef->start_pass) (cinfo, + (master->total_passes > 1 ? + JBUF_SAVE_AND_PASS : JBUF_PASS_THRU)); + (*cinfo->main->start_pass) (cinfo, JBUF_PASS_THRU); + if (cinfo->optimize_coding) { + /* No immediate data output; postpone writing frame/scan headers */ + master->pub.call_pass_startup = FALSE; + } else { + /* Will write frame/scan headers at first jpeg_write_scanlines call */ + master->pub.call_pass_startup = TRUE; + } + break; +#ifdef ENTROPY_OPT_SUPPORTED + case huff_opt_pass: + /* Do Huffman optimization for a scan after the first one. */ + select_scan_parameters(cinfo); + per_scan_setup(cinfo); + if (cinfo->Ss != 0 || cinfo->Ah == 0) { + (*cinfo->entropy->start_pass) (cinfo, TRUE); + (*cinfo->coef->start_pass) (cinfo, JBUF_CRANK_DEST); + master->pub.call_pass_startup = FALSE; + break; + } + /* Special case: Huffman DC refinement scans need no Huffman table + * and therefore we can skip the optimization pass for them. + */ + master->pass_type = output_pass; + master->pass_number++; + /*FALLTHROUGH*/ +#endif + case output_pass: + /* Do a data-output pass. */ + /* We need not repeat per-scan setup if prior optimization pass did it. */ + if (! cinfo->optimize_coding) { + select_scan_parameters(cinfo); + per_scan_setup(cinfo); + } + (*cinfo->entropy->start_pass) (cinfo, FALSE); + (*cinfo->coef->start_pass) (cinfo, JBUF_CRANK_DEST); + /* We emit frame/scan headers now */ + if (master->scan_number == 0) + (*cinfo->marker->write_frame_header) (cinfo); + (*cinfo->marker->write_scan_header) (cinfo); + master->pub.call_pass_startup = FALSE; + break; + default: + ERREXIT(cinfo, JERR_NOT_COMPILED); + } + + master->pub.is_last_pass = (master->pass_number == master->total_passes-1); + + /* Set up progress monitor's pass info if present */ + if (cinfo->progress != NULL) { + cinfo->progress->completed_passes = master->pass_number; + cinfo->progress->total_passes = master->total_passes; + } +} + + +/* + * Special start-of-pass hook. + * This is called by jpeg_write_scanlines if call_pass_startup is TRUE. + * In single-pass processing, we need this hook because we don't want to + * write frame/scan headers during jpeg_start_compress; we want to let the + * application write COM markers etc. between jpeg_start_compress and the + * jpeg_write_scanlines loop. + * In multi-pass processing, this routine is not used. + */ + +METHODDEF(void) +pass_startup (j_compress_ptr cinfo) +{ + cinfo->master->call_pass_startup = FALSE; /* reset flag so call only once */ + + (*cinfo->marker->write_frame_header) (cinfo); + (*cinfo->marker->write_scan_header) (cinfo); +} + + +/* + * Finish up at end of pass. + */ + +METHODDEF(void) +finish_pass_master (j_compress_ptr cinfo) +{ + my_master_ptr master = (my_master_ptr) cinfo->master; + + /* The entropy coder always needs an end-of-pass call, + * either to analyze statistics or to flush its output buffer. + */ + (*cinfo->entropy->finish_pass) (cinfo); + + /* Update state for next pass */ + switch (master->pass_type) { + case main_pass: + /* next pass is either output of scan 0 (after optimization) + * or output of scan 1 (if no optimization). + */ + master->pass_type = output_pass; + if (! cinfo->optimize_coding) + master->scan_number++; + break; + case huff_opt_pass: + /* next pass is always output of current scan */ + master->pass_type = output_pass; + break; + case output_pass: + /* next pass is either optimization or output of next scan */ + if (cinfo->optimize_coding) + master->pass_type = huff_opt_pass; + master->scan_number++; + break; + } + + master->pass_number++; +} + + +/* + * Initialize master compression control. + */ + +GLOBAL(void) +jinit_c_master_control (j_compress_ptr cinfo, boolean transcode_only) +{ + my_master_ptr master; + + master = (my_master_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_comp_master)); + cinfo->master = &master->pub; + master->pub.prepare_for_pass = prepare_for_pass; + master->pub.pass_startup = pass_startup; + master->pub.finish_pass = finish_pass_master; + master->pub.is_last_pass = FALSE; + + /* Validate parameters, determine derived values */ + initial_setup(cinfo, transcode_only); + + if (cinfo->scan_info != NULL) { +#ifdef C_MULTISCAN_FILES_SUPPORTED + validate_script(cinfo); + if (cinfo->block_size < DCTSIZE) + reduce_script(cinfo); +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } else { + cinfo->progressive_mode = FALSE; + cinfo->num_scans = 1; + } + + if (cinfo->optimize_coding) + cinfo->arith_code = FALSE; /* disable arithmetic coding */ + else if (! cinfo->arith_code && + (cinfo->progressive_mode || + (cinfo->block_size > 1 && cinfo->block_size < DCTSIZE))) + /* TEMPORARY HACK ??? */ + /* assume default tables no good for progressive or reduced AC mode */ + cinfo->optimize_coding = TRUE; /* force Huffman optimization */ + + /* Initialize my private state */ + if (transcode_only) { + /* no main pass in transcoding */ + if (cinfo->optimize_coding) + master->pass_type = huff_opt_pass; + else + master->pass_type = output_pass; + } else { + /* for normal compression, first pass is always this type: */ + master->pass_type = main_pass; + } + master->scan_number = 0; + master->pass_number = 0; + if (cinfo->optimize_coding) + master->total_passes = cinfo->num_scans * 2; + else + master->total_passes = cinfo->num_scans; +} diff --git a/compat/libjpeg/jcomapi.c b/compat/libjpeg/jcomapi.c new file mode 100755 index 0000000..1b1a340 --- /dev/null +++ b/compat/libjpeg/jcomapi.c @@ -0,0 +1,106 @@ +/* + * jcomapi.c + * + * Copyright (C) 1994-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains application interface routines that are used for both + * compression and decompression. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * Abort processing of a JPEG compression or decompression operation, + * but don't destroy the object itself. + * + * For this, we merely clean up all the nonpermanent memory pools. + * Note that temp files (virtual arrays) are not allowed to belong to + * the permanent pool, so we will be able to close all temp files here. + * Closing a data source or destination, if necessary, is the application's + * responsibility. + */ + +GLOBAL(void) +jpeg_abort (j_common_ptr cinfo) +{ + int pool; + + /* Do nothing if called on a not-initialized or destroyed JPEG object. */ + if (cinfo->mem == NULL) + return; + + /* Releasing pools in reverse order might help avoid fragmentation + * with some (brain-damaged) malloc libraries. + */ + for (pool = JPOOL_NUMPOOLS-1; pool > JPOOL_PERMANENT; pool--) { + (*cinfo->mem->free_pool) (cinfo, pool); + } + + /* Reset overall state for possible reuse of object */ + if (cinfo->is_decompressor) { + cinfo->global_state = DSTATE_START; + /* Try to keep application from accessing now-deleted marker list. + * A bit kludgy to do it here, but this is the most central place. + */ + ((j_decompress_ptr) cinfo)->marker_list = NULL; + } else { + cinfo->global_state = CSTATE_START; + } +} + + +/* + * Destruction of a JPEG object. + * + * Everything gets deallocated except the master jpeg_compress_struct itself + * and the error manager struct. Both of these are supplied by the application + * and must be freed, if necessary, by the application. (Often they are on + * the stack and so don't need to be freed anyway.) + * Closing a data source or destination, if necessary, is the application's + * responsibility. + */ + +GLOBAL(void) +jpeg_destroy (j_common_ptr cinfo) +{ + /* We need only tell the memory manager to release everything. */ + /* NB: mem pointer is NULL if memory mgr failed to initialize. */ + if (cinfo->mem != NULL) + (*cinfo->mem->self_destruct) (cinfo); + cinfo->mem = NULL; /* be safe if jpeg_destroy is called twice */ + cinfo->global_state = 0; /* mark it destroyed */ +} + + +/* + * Convenience routines for allocating quantization and Huffman tables. + * (Would jutils.c be a more reasonable place to put these?) + */ + +GLOBAL(JQUANT_TBL *) +jpeg_alloc_quant_table (j_common_ptr cinfo) +{ + JQUANT_TBL *tbl; + + tbl = (JQUANT_TBL *) + (*cinfo->mem->alloc_small) (cinfo, JPOOL_PERMANENT, SIZEOF(JQUANT_TBL)); + tbl->sent_table = FALSE; /* make sure this is false in any new table */ + return tbl; +} + + +GLOBAL(JHUFF_TBL *) +jpeg_alloc_huff_table (j_common_ptr cinfo) +{ + JHUFF_TBL *tbl; + + tbl = (JHUFF_TBL *) + (*cinfo->mem->alloc_small) (cinfo, JPOOL_PERMANENT, SIZEOF(JHUFF_TBL)); + tbl->sent_table = FALSE; /* make sure this is false in any new table */ + return tbl; +} diff --git a/compat/libjpeg/jconfig.bcc b/compat/libjpeg/jconfig.bcc new file mode 100755 index 0000000..ae2e97e --- /dev/null +++ b/compat/libjpeg/jconfig.bcc @@ -0,0 +1,48 @@ +/* jconfig.bcc --- jconfig.h for Borland C (Turbo C) on MS-DOS or OS/2. */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#ifdef __MSDOS__ +#define NEED_FAR_POINTERS /* for small or medium memory model */ +#endif +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN /* this assumes you have -w-stu in CFLAGS */ + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#ifdef __MSDOS__ +#define USE_MSDOS_MEMMGR /* Define this if you use jmemdos.c */ +#define MAX_ALLOC_CHUNK 65520L /* Maximum request to malloc() */ +#define USE_FMEM /* Borland has _fmemcpy() and _fmemset() */ +#endif + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#define TWO_FILE_COMMANDLINE +#define USE_SETMODE /* Borland has setmode() */ +#ifdef __MSDOS__ +#define NEED_SIGNAL_CATCHER /* Define this if you use jmemdos.c */ +#endif +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/compat/libjpeg/jconfig.cfg b/compat/libjpeg/jconfig.cfg new file mode 100755 index 0000000..c4548fc --- /dev/null +++ b/compat/libjpeg/jconfig.cfg @@ -0,0 +1,59 @@ +/* jconfig.cfg --- source file edited by configure script */ +/* see jconfig.txt for explanations */ + +#undef HAVE_PROTOTYPES +#undef HAVE_UNSIGNED_CHAR +#undef HAVE_UNSIGNED_SHORT +#undef void +#undef const +#undef CHAR_IS_UNSIGNED +#undef HAVE_STDDEF_H +#undef HAVE_STDLIB_H +#undef HAVE_LOCALE_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS +#undef NEED_SHORT_EXTERNAL_NAMES +/* Define this if you get warnings about undefined structures. */ +#undef INCOMPLETE_TYPES_BROKEN + +/* Define "boolean" as unsigned char, not enum, on Windows systems. */ +#ifdef _WIN32 +#ifndef __RPCNDR_H__ /* don't conflict if rpcndr.h already read */ +typedef unsigned char boolean; +#endif +#ifndef FALSE /* in case these macros already exist */ +#define FALSE 0 /* values of boolean */ +#endif +#ifndef TRUE +#define TRUE 1 +#endif +#define HAVE_BOOLEAN /* prevent jmorecfg.h from redefining it */ +#endif + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED +#undef INLINE +/* These are for configuring the JPEG memory manager. */ +#undef DEFAULT_MAX_MEM +#undef NO_MKTEMP + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#undef TWO_FILE_COMMANDLINE +#undef NEED_SIGNAL_CATCHER +#undef DONT_USE_B_MODE + +/* Define this if you want percent-done progress reports from cjpeg/djpeg. */ +#undef PROGRESS_REPORT + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/compat/libjpeg/jconfig.dj b/compat/libjpeg/jconfig.dj new file mode 100755 index 0000000..9c0f2ce --- /dev/null +++ b/compat/libjpeg/jconfig.dj @@ -0,0 +1,38 @@ +/* jconfig.dj --- jconfig.h for DJGPP (Delorie's GNU C port) on MS-DOS. */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS /* DJGPP uses flat 32-bit addressing */ +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#undef TWO_FILE_COMMANDLINE /* optional */ +#define USE_SETMODE /* Needed to make one-file style work in DJGPP */ +#undef NEED_SIGNAL_CATCHER /* Define this if you use jmemname.c */ +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/compat/libjpeg/jconfig.mac b/compat/libjpeg/jconfig.mac new file mode 100755 index 0000000..a5e5519 --- /dev/null +++ b/compat/libjpeg/jconfig.mac @@ -0,0 +1,43 @@ +/* jconfig.mac --- jconfig.h for CodeWarrior on Apple Macintosh */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#define USE_MAC_MEMMGR /* Define this if you use jmemmac.c */ + +#define ALIGN_TYPE long /* Needed for 680x0 Macs */ + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#define USE_CCOMMAND /* Command line reader for Macintosh */ +#define TWO_FILE_COMMANDLINE /* Binary I/O thru stdin/stdout doesn't work */ + +#undef NEED_SIGNAL_CATCHER +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/compat/libjpeg/jconfig.manx b/compat/libjpeg/jconfig.manx new file mode 100755 index 0000000..46ce226 --- /dev/null +++ b/compat/libjpeg/jconfig.manx @@ -0,0 +1,43 @@ +/* jconfig.manx --- jconfig.h for Amiga systems using Manx Aztec C ver 5.x. */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#define TEMP_DIRECTORY "JPEGTMP:" /* recommended setting for Amiga */ + +#define SHORTxSHORT_32 /* produces better DCT code with Aztec C */ + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#define TWO_FILE_COMMANDLINE +#define NEED_SIGNAL_CATCHER +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#define signal_catcher _abort /* hack for Aztec C naming requirements */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/compat/libjpeg/jconfig.mc6 b/compat/libjpeg/jconfig.mc6 new file mode 100755 index 0000000..4dae6d0 --- /dev/null +++ b/compat/libjpeg/jconfig.mc6 @@ -0,0 +1,52 @@ +/* jconfig.mc6 --- jconfig.h for Microsoft C on MS-DOS, version 6.00A & up. */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#define NEED_FAR_POINTERS /* for small or medium memory model */ +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#define USE_MSDOS_MEMMGR /* Define this if you use jmemdos.c */ + +#define MAX_ALLOC_CHUNK 65520L /* Maximum request to malloc() */ + +#define USE_FMEM /* Microsoft has _fmemcpy() and _fmemset() */ + +#define NEED_FHEAPMIN /* far heap management routines are broken */ + +#define SHORTxLCONST_32 /* enable compiler-specific DCT optimization */ +/* Note: the above define is known to improve the code with Microsoft C 6.00A. + * I do not know whether it is good for later compiler versions. + * Please report any info on this point to jpeg-info@jpegclub.org. + */ + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#define TWO_FILE_COMMANDLINE +#define USE_SETMODE /* Microsoft has setmode() */ +#define NEED_SIGNAL_CATCHER /* Define this if you use jmemdos.c */ +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/compat/libjpeg/jconfig.sas b/compat/libjpeg/jconfig.sas new file mode 100755 index 0000000..8dc8cc1 --- /dev/null +++ b/compat/libjpeg/jconfig.sas @@ -0,0 +1,43 @@ +/* jconfig.sas --- jconfig.h for Amiga systems using SAS C 6.0 and up. */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#define TEMP_DIRECTORY "JPEGTMP:" /* recommended setting for Amiga */ + +#define NO_MKTEMP /* SAS C doesn't have mktemp() */ + +#define SHORTxSHORT_32 /* produces better DCT code with SAS C */ + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#define TWO_FILE_COMMANDLINE +#define NEED_SIGNAL_CATCHER +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/compat/libjpeg/jconfig.st b/compat/libjpeg/jconfig.st new file mode 100755 index 0000000..e0af8e1 --- /dev/null +++ b/compat/libjpeg/jconfig.st @@ -0,0 +1,42 @@ +/* jconfig.st --- jconfig.h for Atari ST/STE/TT using Pure C or Turbo C. */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS +#undef NEED_SHORT_EXTERNAL_NAMES +#define INCOMPLETE_TYPES_BROKEN /* suppress undefined-structure warnings */ + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#define ALIGN_TYPE long /* apparently double is a weird size? */ + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#define TWO_FILE_COMMANDLINE /* optional -- undef if you like Unix style */ +/* Note: if you undef TWO_FILE_COMMANDLINE, you may need to define + * USE_SETMODE. Some Atari compilers require it, some do not. + */ +#define NEED_SIGNAL_CATCHER /* needed if you use jmemname.c */ +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/compat/libjpeg/jconfig.txt b/compat/libjpeg/jconfig.txt new file mode 100755 index 0000000..6c92b82 --- /dev/null +++ b/compat/libjpeg/jconfig.txt @@ -0,0 +1,171 @@ +/* + * jconfig.txt + * + * Copyright (C) 1991-1994, Thomas G. Lane. + * Modified 2009-2013 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file documents the configuration options that are required to + * customize the JPEG software for a particular system. + * + * The actual configuration options for a particular installation are stored + * in jconfig.h. On many machines, jconfig.h can be generated automatically + * or copied from one of the "canned" jconfig files that we supply. But if + * you need to generate a jconfig.h file by hand, this file tells you how. + * + * DO NOT EDIT THIS FILE --- IT WON'T ACCOMPLISH ANYTHING. + * EDIT A COPY NAMED JCONFIG.H. + */ + + +/* + * These symbols indicate the properties of your machine or compiler. + * #define the symbol if yes, #undef it if no. + */ + +/* Does your compiler support function prototypes? + * (If not, you also need to use ansi2knr, see install.txt) + */ +#define HAVE_PROTOTYPES + +/* Does your compiler support the declaration "unsigned char" ? + * How about "unsigned short" ? + */ +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT + +/* Define "void" as "char" if your compiler doesn't know about type void. + * NOTE: be sure to define void such that "void *" represents the most general + * pointer type, e.g., that returned by malloc(). + */ +/* #define void char */ + +/* Define "const" as empty if your compiler doesn't know the "const" keyword. + */ +/* #define const */ + +/* Define this if an ordinary "char" type is unsigned. + * If you're not sure, leaving it undefined will work at some cost in speed. + * If you defined HAVE_UNSIGNED_CHAR then the speed difference is minimal. + */ +#undef CHAR_IS_UNSIGNED + +/* Define this if your system has an ANSI-conforming file. + */ +#define HAVE_STDDEF_H + +/* Define this if your system has an ANSI-conforming file. + */ +#define HAVE_STDLIB_H + +/* Define this if your system does not have an ANSI/SysV , + * but does have a BSD-style . + */ +#undef NEED_BSD_STRINGS + +/* Define this if your system does not provide typedef size_t in any of the + * ANSI-standard places (stddef.h, stdlib.h, or stdio.h), but places it in + * instead. + */ +#undef NEED_SYS_TYPES_H + +/* For 80x86 machines, you need to define NEED_FAR_POINTERS, + * unless you are using a large-data memory model or 80386 flat-memory mode. + * On less brain-damaged CPUs this symbol must not be defined. + * (Defining this symbol causes large data structures to be referenced through + * "far" pointers and to be allocated with a special version of malloc.) + */ +#undef NEED_FAR_POINTERS + +/* Define this if your linker needs global names to be unique in less + * than the first 15 characters. + */ +#undef NEED_SHORT_EXTERNAL_NAMES + +/* Although a real ANSI C compiler can deal perfectly well with pointers to + * unspecified structures (see "incomplete types" in the spec), a few pre-ANSI + * and pseudo-ANSI compilers get confused. To keep one of these bozos happy, + * define INCOMPLETE_TYPES_BROKEN. This is not recommended unless you + * actually get "missing structure definition" warnings or errors while + * compiling the JPEG code. + */ +#undef INCOMPLETE_TYPES_BROKEN + +/* Define "boolean" as unsigned char, not enum, on Windows systems. + */ +#ifdef _WIN32 +#ifndef __RPCNDR_H__ /* don't conflict if rpcndr.h already read */ +typedef unsigned char boolean; +#endif +#ifndef FALSE /* in case these macros already exist */ +#define FALSE 0 /* values of boolean */ +#endif +#ifndef TRUE +#define TRUE 1 +#endif +#define HAVE_BOOLEAN /* prevent jmorecfg.h from redefining it */ +#endif + + +/* + * The following options affect code selection within the JPEG library, + * but they don't need to be visible to applications using the library. + * To minimize application namespace pollution, the symbols won't be + * defined unless JPEG_INTERNALS has been defined. + */ + +#ifdef JPEG_INTERNALS + +/* Define this if your compiler implements ">>" on signed values as a logical + * (unsigned) shift; leave it undefined if ">>" is a signed (arithmetic) shift, + * which is the normal and rational definition. + */ +#undef RIGHT_SHIFT_IS_UNSIGNED + + +#endif /* JPEG_INTERNALS */ + + +/* + * The remaining options do not affect the JPEG library proper, + * but only the sample applications cjpeg/djpeg (see cjpeg.c, djpeg.c). + * Other applications can ignore these. + */ + +#ifdef JPEG_CJPEG_DJPEG + +/* These defines indicate which image (non-JPEG) file formats are allowed. */ + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +/* Define this if you want to name both input and output files on the command + * line, rather than using stdout and optionally stdin. You MUST do this if + * your system can't cope with binary I/O to stdin/stdout. See comments at + * head of cjpeg.c or djpeg.c. + */ +#undef TWO_FILE_COMMANDLINE + +/* Define this if your system needs explicit cleanup of temporary files. + * This is crucial under MS-DOS, where the temporary "files" may be areas + * of extended memory; on most other systems it's not as important. + */ +#undef NEED_SIGNAL_CATCHER + +/* By default, we open image files with fopen(...,"rb") or fopen(...,"wb"). + * This is necessary on systems that distinguish text files from binary files, + * and is harmless on most systems that don't. If you have one of the rare + * systems that complains about the "b" spec, define this symbol. + */ +#undef DONT_USE_B_MODE + +/* Define this if you want percent-done progress reports from cjpeg/djpeg. + */ +#undef PROGRESS_REPORT + + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/compat/libjpeg/jconfig.vc b/compat/libjpeg/jconfig.vc new file mode 100755 index 0000000..9b71ed2 --- /dev/null +++ b/compat/libjpeg/jconfig.vc @@ -0,0 +1,52 @@ +/* jconfig.vc --- jconfig.h for Microsoft Visual C++ on Windows 9x or NT. */ +/* This file also works for Borland C++ 32-bit (bcc32) on Windows 9x or NT. */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS /* we presume a 32-bit flat memory model */ +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN + +/* Define "boolean" as unsigned char, not enum, per Windows custom */ +#ifndef __RPCNDR_H__ /* don't conflict if rpcndr.h already read */ +typedef unsigned char boolean; +#endif +#ifndef FALSE /* in case these macros already exist */ +#define FALSE 0 /* values of boolean */ +#endif +#ifndef TRUE +#define TRUE 1 +#endif +#define HAVE_BOOLEAN /* prevent jmorecfg.h from redefining it */ + + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#define TWO_FILE_COMMANDLINE /* optional */ +#define USE_SETMODE /* Microsoft has setmode() */ +#undef NEED_SIGNAL_CATCHER +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/compat/libjpeg/jconfig.vms b/compat/libjpeg/jconfig.vms new file mode 100755 index 0000000..bdaa027 --- /dev/null +++ b/compat/libjpeg/jconfig.vms @@ -0,0 +1,37 @@ +/* jconfig.vms --- jconfig.h for use on Digital VMS. */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#define TWO_FILE_COMMANDLINE /* Needed on VMS */ +#undef NEED_SIGNAL_CATCHER +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/compat/libjpeg/jconfig.wat b/compat/libjpeg/jconfig.wat new file mode 100755 index 0000000..f1e0c02 --- /dev/null +++ b/compat/libjpeg/jconfig.wat @@ -0,0 +1,38 @@ +/* jconfig.wat --- jconfig.h for Watcom C/C++ on MS-DOS or OS/2. */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#define CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS /* Watcom uses flat 32-bit addressing */ +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#undef TWO_FILE_COMMANDLINE /* optional */ +#define USE_SETMODE /* Needed to make one-file style work in Watcom */ +#undef NEED_SIGNAL_CATCHER /* Define this if you use jmemname.c */ +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/compat/libjpeg/jcparam.c b/compat/libjpeg/jcparam.c new file mode 100755 index 0000000..1680e39 --- /dev/null +++ b/compat/libjpeg/jcparam.c @@ -0,0 +1,675 @@ +/* + * jcparam.c + * + * Copyright (C) 1991-1998, Thomas G. Lane. + * Modified 2003-2013 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains optional default-setting code for the JPEG compressor. + * Applications do not have to use this file, but those that don't use it + * must know a lot more about the innards of the JPEG code. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * Quantization table setup routines + */ + +GLOBAL(void) +jpeg_add_quant_table (j_compress_ptr cinfo, int which_tbl, + const unsigned int *basic_table, + int scale_factor, boolean force_baseline) +/* Define a quantization table equal to the basic_table times + * a scale factor (given as a percentage). + * If force_baseline is TRUE, the computed quantization table entries + * are limited to 1..255 for JPEG baseline compatibility. + */ +{ + JQUANT_TBL ** qtblptr; + int i; + long temp; + + /* Safety check to ensure start_compress not called yet. */ + if (cinfo->global_state != CSTATE_START) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + if (which_tbl < 0 || which_tbl >= NUM_QUANT_TBLS) + ERREXIT1(cinfo, JERR_DQT_INDEX, which_tbl); + + qtblptr = & cinfo->quant_tbl_ptrs[which_tbl]; + + if (*qtblptr == NULL) + *qtblptr = jpeg_alloc_quant_table((j_common_ptr) cinfo); + + for (i = 0; i < DCTSIZE2; i++) { + temp = ((long) basic_table[i] * scale_factor + 50L) / 100L; + /* limit the values to the valid range */ + if (temp <= 0L) temp = 1L; + if (temp > 32767L) temp = 32767L; /* max quantizer needed for 12 bits */ + if (force_baseline && temp > 255L) + temp = 255L; /* limit to baseline range if requested */ + (*qtblptr)->quantval[i] = (UINT16) temp; + } + + /* Initialize sent_table FALSE so table will be written to JPEG file. */ + (*qtblptr)->sent_table = FALSE; +} + + +/* These are the sample quantization tables given in JPEG spec section K.1. + * The spec says that the values given produce "good" quality, and + * when divided by 2, "very good" quality. + */ +static const unsigned int std_luminance_quant_tbl[DCTSIZE2] = { + 16, 11, 10, 16, 24, 40, 51, 61, + 12, 12, 14, 19, 26, 58, 60, 55, + 14, 13, 16, 24, 40, 57, 69, 56, + 14, 17, 22, 29, 51, 87, 80, 62, + 18, 22, 37, 56, 68, 109, 103, 77, + 24, 35, 55, 64, 81, 104, 113, 92, + 49, 64, 78, 87, 103, 121, 120, 101, + 72, 92, 95, 98, 112, 100, 103, 99 +}; +static const unsigned int std_chrominance_quant_tbl[DCTSIZE2] = { + 17, 18, 24, 47, 99, 99, 99, 99, + 18, 21, 26, 66, 99, 99, 99, 99, + 24, 26, 56, 99, 99, 99, 99, 99, + 47, 66, 99, 99, 99, 99, 99, 99, + 99, 99, 99, 99, 99, 99, 99, 99, + 99, 99, 99, 99, 99, 99, 99, 99, + 99, 99, 99, 99, 99, 99, 99, 99, + 99, 99, 99, 99, 99, 99, 99, 99 +}; + + +GLOBAL(void) +jpeg_default_qtables (j_compress_ptr cinfo, boolean force_baseline) +/* Set or change the 'quality' (quantization) setting, using default tables + * and straight percentage-scaling quality scales. + * This entry point allows different scalings for luminance and chrominance. + */ +{ + /* Set up two quantization tables using the specified scaling */ + jpeg_add_quant_table(cinfo, 0, std_luminance_quant_tbl, + cinfo->q_scale_factor[0], force_baseline); + jpeg_add_quant_table(cinfo, 1, std_chrominance_quant_tbl, + cinfo->q_scale_factor[1], force_baseline); +} + + +GLOBAL(void) +jpeg_set_linear_quality (j_compress_ptr cinfo, int scale_factor, + boolean force_baseline) +/* Set or change the 'quality' (quantization) setting, using default tables + * and a straight percentage-scaling quality scale. In most cases it's better + * to use jpeg_set_quality (below); this entry point is provided for + * applications that insist on a linear percentage scaling. + */ +{ + /* Set up two quantization tables using the specified scaling */ + jpeg_add_quant_table(cinfo, 0, std_luminance_quant_tbl, + scale_factor, force_baseline); + jpeg_add_quant_table(cinfo, 1, std_chrominance_quant_tbl, + scale_factor, force_baseline); +} + + +GLOBAL(int) +jpeg_quality_scaling (int quality) +/* Convert a user-specified quality rating to a percentage scaling factor + * for an underlying quantization table, using our recommended scaling curve. + * The input 'quality' factor should be 0 (terrible) to 100 (very good). + */ +{ + /* Safety limit on quality factor. Convert 0 to 1 to avoid zero divide. */ + if (quality <= 0) quality = 1; + if (quality > 100) quality = 100; + + /* The basic table is used as-is (scaling 100) for a quality of 50. + * Qualities 50..100 are converted to scaling percentage 200 - 2*Q; + * note that at Q=100 the scaling is 0, which will cause jpeg_add_quant_table + * to make all the table entries 1 (hence, minimum quantization loss). + * Qualities 1..50 are converted to scaling percentage 5000/Q. + */ + if (quality < 50) + quality = 5000 / quality; + else + quality = 200 - quality*2; + + return quality; +} + + +GLOBAL(void) +jpeg_set_quality (j_compress_ptr cinfo, int quality, boolean force_baseline) +/* Set or change the 'quality' (quantization) setting, using default tables. + * This is the standard quality-adjusting entry point for typical user + * interfaces; only those who want detailed control over quantization tables + * would use the preceding routines directly. + */ +{ + /* Convert user 0-100 rating to percentage scaling */ + quality = jpeg_quality_scaling(quality); + + /* Set up standard quality tables */ + jpeg_set_linear_quality(cinfo, quality, force_baseline); +} + + +/* + * Huffman table setup routines + */ + +LOCAL(void) +add_huff_table (j_compress_ptr cinfo, + JHUFF_TBL **htblptr, const UINT8 *bits, const UINT8 *val) +/* Define a Huffman table */ +{ + int nsymbols, len; + + if (*htblptr == NULL) + *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); + + /* Copy the number-of-symbols-of-each-code-length counts */ + MEMCOPY((*htblptr)->bits, bits, SIZEOF((*htblptr)->bits)); + + /* Validate the counts. We do this here mainly so we can copy the right + * number of symbols from the val[] array, without risking marching off + * the end of memory. jchuff.c will do a more thorough test later. + */ + nsymbols = 0; + for (len = 1; len <= 16; len++) + nsymbols += bits[len]; + if (nsymbols < 1 || nsymbols > 256) + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + + MEMCOPY((*htblptr)->huffval, val, nsymbols * SIZEOF(UINT8)); + + /* Initialize sent_table FALSE so table will be written to JPEG file. */ + (*htblptr)->sent_table = FALSE; +} + + +LOCAL(void) +std_huff_tables (j_compress_ptr cinfo) +/* Set up the standard Huffman tables (cf. JPEG standard section K.3) */ +/* IMPORTANT: these are only valid for 8-bit data precision! */ +{ + static const UINT8 bits_dc_luminance[17] = + { /* 0-base */ 0, 0, 1, 5, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0 }; + static const UINT8 val_dc_luminance[] = + { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 }; + + static const UINT8 bits_dc_chrominance[17] = + { /* 0-base */ 0, 0, 3, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0 }; + static const UINT8 val_dc_chrominance[] = + { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 }; + + static const UINT8 bits_ac_luminance[17] = + { /* 0-base */ 0, 0, 2, 1, 3, 3, 2, 4, 3, 5, 5, 4, 4, 0, 0, 1, 0x7d }; + static const UINT8 val_ac_luminance[] = + { 0x01, 0x02, 0x03, 0x00, 0x04, 0x11, 0x05, 0x12, + 0x21, 0x31, 0x41, 0x06, 0x13, 0x51, 0x61, 0x07, + 0x22, 0x71, 0x14, 0x32, 0x81, 0x91, 0xa1, 0x08, + 0x23, 0x42, 0xb1, 0xc1, 0x15, 0x52, 0xd1, 0xf0, + 0x24, 0x33, 0x62, 0x72, 0x82, 0x09, 0x0a, 0x16, + 0x17, 0x18, 0x19, 0x1a, 0x25, 0x26, 0x27, 0x28, + 0x29, 0x2a, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39, + 0x3a, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49, + 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59, + 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, + 0x6a, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, + 0x7a, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, + 0x8a, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, + 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, + 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6, + 0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3, 0xc4, 0xc5, + 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xd2, 0xd3, 0xd4, + 0xd5, 0xd6, 0xd7, 0xd8, 0xd9, 0xda, 0xe1, 0xe2, + 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9, 0xea, + 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8, + 0xf9, 0xfa }; + + static const UINT8 bits_ac_chrominance[17] = + { /* 0-base */ 0, 0, 2, 1, 2, 4, 4, 3, 4, 7, 5, 4, 4, 0, 1, 2, 0x77 }; + static const UINT8 val_ac_chrominance[] = + { 0x00, 0x01, 0x02, 0x03, 0x11, 0x04, 0x05, 0x21, + 0x31, 0x06, 0x12, 0x41, 0x51, 0x07, 0x61, 0x71, + 0x13, 0x22, 0x32, 0x81, 0x08, 0x14, 0x42, 0x91, + 0xa1, 0xb1, 0xc1, 0x09, 0x23, 0x33, 0x52, 0xf0, + 0x15, 0x62, 0x72, 0xd1, 0x0a, 0x16, 0x24, 0x34, + 0xe1, 0x25, 0xf1, 0x17, 0x18, 0x19, 0x1a, 0x26, + 0x27, 0x28, 0x29, 0x2a, 0x35, 0x36, 0x37, 0x38, + 0x39, 0x3a, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, + 0x49, 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, + 0x59, 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, + 0x69, 0x6a, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, + 0x79, 0x7a, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, + 0x88, 0x89, 0x8a, 0x92, 0x93, 0x94, 0x95, 0x96, + 0x97, 0x98, 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5, + 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4, + 0xb5, 0xb6, 0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3, + 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xd2, + 0xd3, 0xd4, 0xd5, 0xd6, 0xd7, 0xd8, 0xd9, 0xda, + 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9, + 0xea, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8, + 0xf9, 0xfa }; + + add_huff_table(cinfo, &cinfo->dc_huff_tbl_ptrs[0], + bits_dc_luminance, val_dc_luminance); + add_huff_table(cinfo, &cinfo->ac_huff_tbl_ptrs[0], + bits_ac_luminance, val_ac_luminance); + add_huff_table(cinfo, &cinfo->dc_huff_tbl_ptrs[1], + bits_dc_chrominance, val_dc_chrominance); + add_huff_table(cinfo, &cinfo->ac_huff_tbl_ptrs[1], + bits_ac_chrominance, val_ac_chrominance); +} + + +/* + * Default parameter setup for compression. + * + * Applications that don't choose to use this routine must do their + * own setup of all these parameters. Alternately, you can call this + * to establish defaults and then alter parameters selectively. This + * is the recommended approach since, if we add any new parameters, + * your code will still work (they'll be set to reasonable defaults). + */ + +GLOBAL(void) +jpeg_set_defaults (j_compress_ptr cinfo) +{ + int i; + + /* Safety check to ensure start_compress not called yet. */ + if (cinfo->global_state != CSTATE_START) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + /* Allocate comp_info array large enough for maximum component count. + * Array is made permanent in case application wants to compress + * multiple images at same param settings. + */ + if (cinfo->comp_info == NULL) + cinfo->comp_info = (jpeg_component_info *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + MAX_COMPONENTS * SIZEOF(jpeg_component_info)); + + /* Initialize everything not dependent on the color space */ + + cinfo->scale_num = 1; /* 1:1 scaling */ + cinfo->scale_denom = 1; + cinfo->data_precision = BITS_IN_JSAMPLE; + /* Set up two quantization tables using default quality of 75 */ + jpeg_set_quality(cinfo, 75, TRUE); + /* Set up two Huffman tables */ + std_huff_tables(cinfo); + + /* Initialize default arithmetic coding conditioning */ + for (i = 0; i < NUM_ARITH_TBLS; i++) { + cinfo->arith_dc_L[i] = 0; + cinfo->arith_dc_U[i] = 1; + cinfo->arith_ac_K[i] = 5; + } + + /* Default is no multiple-scan output */ + cinfo->scan_info = NULL; + cinfo->num_scans = 0; + + /* Expect normal source image, not raw downsampled data */ + cinfo->raw_data_in = FALSE; + + /* The standard Huffman tables are only valid for 8-bit data precision. + * If the precision is higher, use arithmetic coding. + * (Alternatively, using Huffman coding would be possible with forcing + * optimization on so that usable tables will be computed, or by + * supplying default tables that are valid for the desired precision.) + * Otherwise, use Huffman coding by default. + */ + cinfo->arith_code = cinfo->data_precision > 8 ? TRUE : FALSE; + + /* By default, don't do extra passes to optimize entropy coding */ + cinfo->optimize_coding = FALSE; + + /* By default, use the simpler non-cosited sampling alignment */ + cinfo->CCIR601_sampling = FALSE; + + /* By default, apply fancy downsampling */ + cinfo->do_fancy_downsampling = TRUE; + + /* No input smoothing */ + cinfo->smoothing_factor = 0; + + /* DCT algorithm preference */ + cinfo->dct_method = JDCT_DEFAULT; + + /* No restart markers */ + cinfo->restart_interval = 0; + cinfo->restart_in_rows = 0; + + /* Fill in default JFIF marker parameters. Note that whether the marker + * will actually be written is determined by jpeg_set_colorspace. + * + * By default, the library emits JFIF version code 1.01. + * An application that wants to emit JFIF 1.02 extension markers should set + * JFIF_minor_version to 2. We could probably get away with just defaulting + * to 1.02, but there may still be some decoders in use that will complain + * about that; saying 1.01 should minimize compatibility problems. + * + * For wide gamut colorspaces (BG_RGB and BG_YCC), the major version will be + * overridden by jpeg_set_colorspace and set to 2. + */ + cinfo->JFIF_major_version = 1; /* Default JFIF version = 1.01 */ + cinfo->JFIF_minor_version = 1; + cinfo->density_unit = 0; /* Pixel size is unknown by default */ + cinfo->X_density = 1; /* Pixel aspect ratio is square by default */ + cinfo->Y_density = 1; + + /* No color transform */ + cinfo->color_transform = JCT_NONE; + + /* Choose JPEG colorspace based on input space, set defaults accordingly */ + + jpeg_default_colorspace(cinfo); +} + + +/* + * Select an appropriate JPEG colorspace for in_color_space. + */ + +GLOBAL(void) +jpeg_default_colorspace (j_compress_ptr cinfo) +{ + switch (cinfo->in_color_space) { + case JCS_UNKNOWN: + jpeg_set_colorspace(cinfo, JCS_UNKNOWN); + break; + case JCS_GRAYSCALE: + jpeg_set_colorspace(cinfo, JCS_GRAYSCALE); + break; + case JCS_RGB: + jpeg_set_colorspace(cinfo, JCS_YCbCr); + break; + case JCS_YCbCr: + jpeg_set_colorspace(cinfo, JCS_YCbCr); + break; + case JCS_CMYK: + jpeg_set_colorspace(cinfo, JCS_CMYK); /* By default, no translation */ + break; + case JCS_YCCK: + jpeg_set_colorspace(cinfo, JCS_YCCK); + break; + case JCS_BG_RGB: + /* No translation for now -- conversion to BG_YCC not yet supportet */ + jpeg_set_colorspace(cinfo, JCS_BG_RGB); + break; + case JCS_BG_YCC: + jpeg_set_colorspace(cinfo, JCS_BG_YCC); + break; + default: + ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); + } +} + + +/* + * Set the JPEG colorspace, and choose colorspace-dependent default values. + */ + +GLOBAL(void) +jpeg_set_colorspace (j_compress_ptr cinfo, J_COLOR_SPACE colorspace) +{ + jpeg_component_info * compptr; + int ci; + +#define SET_COMP(index,id,hsamp,vsamp,quant,dctbl,actbl) \ + (compptr = &cinfo->comp_info[index], \ + compptr->component_id = (id), \ + compptr->h_samp_factor = (hsamp), \ + compptr->v_samp_factor = (vsamp), \ + compptr->quant_tbl_no = (quant), \ + compptr->dc_tbl_no = (dctbl), \ + compptr->ac_tbl_no = (actbl) ) + + /* Safety check to ensure start_compress not called yet. */ + if (cinfo->global_state != CSTATE_START) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + /* For all colorspaces, we use Q and Huff tables 0 for luminance components, + * tables 1 for chrominance components. + */ + + cinfo->jpeg_color_space = colorspace; + + cinfo->write_JFIF_header = FALSE; /* No marker for non-JFIF colorspaces */ + cinfo->write_Adobe_marker = FALSE; /* write no Adobe marker by default */ + + switch (colorspace) { + case JCS_UNKNOWN: + cinfo->num_components = cinfo->input_components; + if (cinfo->num_components < 1 || cinfo->num_components > MAX_COMPONENTS) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, + MAX_COMPONENTS); + for (ci = 0; ci < cinfo->num_components; ci++) { + SET_COMP(ci, ci, 1,1, 0, 0,0); + } + break; + case JCS_GRAYSCALE: + cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */ + cinfo->num_components = 1; + /* JFIF specifies component ID 1 */ + SET_COMP(0, 0x01, 1,1, 0, 0,0); + break; + case JCS_RGB: + cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag RGB */ + cinfo->num_components = 3; + SET_COMP(0, 0x52 /* 'R' */, 1,1, 0, + cinfo->color_transform == JCT_SUBTRACT_GREEN ? 1 : 0, + cinfo->color_transform == JCT_SUBTRACT_GREEN ? 1 : 0); + SET_COMP(1, 0x47 /* 'G' */, 1,1, 0, 0,0); + SET_COMP(2, 0x42 /* 'B' */, 1,1, 0, + cinfo->color_transform == JCT_SUBTRACT_GREEN ? 1 : 0, + cinfo->color_transform == JCT_SUBTRACT_GREEN ? 1 : 0); + break; + case JCS_YCbCr: + cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */ + cinfo->num_components = 3; + /* JFIF specifies component IDs 1,2,3 */ + /* We default to 2x2 subsamples of chrominance */ + SET_COMP(0, 0x01, 2,2, 0, 0,0); + SET_COMP(1, 0x02, 1,1, 1, 1,1); + SET_COMP(2, 0x03, 1,1, 1, 1,1); + break; + case JCS_CMYK: + cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag CMYK */ + cinfo->num_components = 4; + SET_COMP(0, 0x43 /* 'C' */, 1,1, 0, 0,0); + SET_COMP(1, 0x4D /* 'M' */, 1,1, 0, 0,0); + SET_COMP(2, 0x59 /* 'Y' */, 1,1, 0, 0,0); + SET_COMP(3, 0x4B /* 'K' */, 1,1, 0, 0,0); + break; + case JCS_YCCK: + cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag YCCK */ + cinfo->num_components = 4; + SET_COMP(0, 0x01, 2,2, 0, 0,0); + SET_COMP(1, 0x02, 1,1, 1, 1,1); + SET_COMP(2, 0x03, 1,1, 1, 1,1); + SET_COMP(3, 0x04, 2,2, 0, 0,0); + break; + case JCS_BG_RGB: + cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */ + cinfo->JFIF_major_version = 2; /* Set JFIF major version = 2 */ + cinfo->num_components = 3; + /* Add offset 0x20 to the normal R/G/B component IDs */ + SET_COMP(0, 0x72 /* 'r' */, 1,1, 0, + cinfo->color_transform == JCT_SUBTRACT_GREEN ? 1 : 0, + cinfo->color_transform == JCT_SUBTRACT_GREEN ? 1 : 0); + SET_COMP(1, 0x67 /* 'g' */, 1,1, 0, 0,0); + SET_COMP(2, 0x62 /* 'b' */, 1,1, 0, + cinfo->color_transform == JCT_SUBTRACT_GREEN ? 1 : 0, + cinfo->color_transform == JCT_SUBTRACT_GREEN ? 1 : 0); + break; + case JCS_BG_YCC: + cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */ + cinfo->JFIF_major_version = 2; /* Set JFIF major version = 2 */ + cinfo->num_components = 3; + /* Add offset 0x20 to the normal Cb/Cr component IDs */ + /* We default to 2x2 subsamples of chrominance */ + SET_COMP(0, 0x01, 2,2, 0, 0,0); + SET_COMP(1, 0x22, 1,1, 1, 1,1); + SET_COMP(2, 0x23, 1,1, 1, 1,1); + break; + default: + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + } +} + + +#ifdef C_PROGRESSIVE_SUPPORTED + +LOCAL(jpeg_scan_info *) +fill_a_scan (jpeg_scan_info * scanptr, int ci, + int Ss, int Se, int Ah, int Al) +/* Support routine: generate one scan for specified component */ +{ + scanptr->comps_in_scan = 1; + scanptr->component_index[0] = ci; + scanptr->Ss = Ss; + scanptr->Se = Se; + scanptr->Ah = Ah; + scanptr->Al = Al; + scanptr++; + return scanptr; +} + +LOCAL(jpeg_scan_info *) +fill_scans (jpeg_scan_info * scanptr, int ncomps, + int Ss, int Se, int Ah, int Al) +/* Support routine: generate one scan for each component */ +{ + int ci; + + for (ci = 0; ci < ncomps; ci++) { + scanptr->comps_in_scan = 1; + scanptr->component_index[0] = ci; + scanptr->Ss = Ss; + scanptr->Se = Se; + scanptr->Ah = Ah; + scanptr->Al = Al; + scanptr++; + } + return scanptr; +} + +LOCAL(jpeg_scan_info *) +fill_dc_scans (jpeg_scan_info * scanptr, int ncomps, int Ah, int Al) +/* Support routine: generate interleaved DC scan if possible, else N scans */ +{ + int ci; + + if (ncomps <= MAX_COMPS_IN_SCAN) { + /* Single interleaved DC scan */ + scanptr->comps_in_scan = ncomps; + for (ci = 0; ci < ncomps; ci++) + scanptr->component_index[ci] = ci; + scanptr->Ss = scanptr->Se = 0; + scanptr->Ah = Ah; + scanptr->Al = Al; + scanptr++; + } else { + /* Noninterleaved DC scan for each component */ + scanptr = fill_scans(scanptr, ncomps, 0, 0, Ah, Al); + } + return scanptr; +} + + +/* + * Create a recommended progressive-JPEG script. + * cinfo->num_components and cinfo->jpeg_color_space must be correct. + */ + +GLOBAL(void) +jpeg_simple_progression (j_compress_ptr cinfo) +{ + int ncomps = cinfo->num_components; + int nscans; + jpeg_scan_info * scanptr; + + /* Safety check to ensure start_compress not called yet. */ + if (cinfo->global_state != CSTATE_START) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + /* Figure space needed for script. Calculation must match code below! */ + if (ncomps == 3 && + (cinfo->jpeg_color_space == JCS_YCbCr || + cinfo->jpeg_color_space == JCS_BG_YCC)) { + /* Custom script for YCC color images. */ + nscans = 10; + } else { + /* All-purpose script for other color spaces. */ + if (ncomps > MAX_COMPS_IN_SCAN) + nscans = 6 * ncomps; /* 2 DC + 4 AC scans per component */ + else + nscans = 2 + 4 * ncomps; /* 2 DC scans; 4 AC scans per component */ + } + + /* Allocate space for script. + * We need to put it in the permanent pool in case the application performs + * multiple compressions without changing the settings. To avoid a memory + * leak if jpeg_simple_progression is called repeatedly for the same JPEG + * object, we try to re-use previously allocated space, and we allocate + * enough space to handle YCC even if initially asked for grayscale. + */ + if (cinfo->script_space == NULL || cinfo->script_space_size < nscans) { + cinfo->script_space_size = MAX(nscans, 10); + cinfo->script_space = (jpeg_scan_info *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + cinfo->script_space_size * SIZEOF(jpeg_scan_info)); + } + scanptr = cinfo->script_space; + cinfo->scan_info = scanptr; + cinfo->num_scans = nscans; + + if (ncomps == 3 && + (cinfo->jpeg_color_space == JCS_YCbCr || + cinfo->jpeg_color_space == JCS_BG_YCC)) { + /* Custom script for YCC color images. */ + /* Initial DC scan */ + scanptr = fill_dc_scans(scanptr, ncomps, 0, 1); + /* Initial AC scan: get some luma data out in a hurry */ + scanptr = fill_a_scan(scanptr, 0, 1, 5, 0, 2); + /* Chroma data is too small to be worth expending many scans on */ + scanptr = fill_a_scan(scanptr, 2, 1, 63, 0, 1); + scanptr = fill_a_scan(scanptr, 1, 1, 63, 0, 1); + /* Complete spectral selection for luma AC */ + scanptr = fill_a_scan(scanptr, 0, 6, 63, 0, 2); + /* Refine next bit of luma AC */ + scanptr = fill_a_scan(scanptr, 0, 1, 63, 2, 1); + /* Finish DC successive approximation */ + scanptr = fill_dc_scans(scanptr, ncomps, 1, 0); + /* Finish AC successive approximation */ + scanptr = fill_a_scan(scanptr, 2, 1, 63, 1, 0); + scanptr = fill_a_scan(scanptr, 1, 1, 63, 1, 0); + /* Luma bottom bit comes last since it's usually largest scan */ + scanptr = fill_a_scan(scanptr, 0, 1, 63, 1, 0); + } else { + /* All-purpose script for other color spaces. */ + /* Successive approximation first pass */ + scanptr = fill_dc_scans(scanptr, ncomps, 0, 1); + scanptr = fill_scans(scanptr, ncomps, 1, 5, 0, 2); + scanptr = fill_scans(scanptr, ncomps, 6, 63, 0, 2); + /* Successive approximation second pass */ + scanptr = fill_scans(scanptr, ncomps, 1, 63, 2, 1); + /* Successive approximation final pass */ + scanptr = fill_dc_scans(scanptr, ncomps, 1, 0); + scanptr = fill_scans(scanptr, ncomps, 1, 63, 1, 0); + } +} + +#endif /* C_PROGRESSIVE_SUPPORTED */ diff --git a/compat/libjpeg/jcprepct.c b/compat/libjpeg/jcprepct.c new file mode 100755 index 0000000..00101e0 --- /dev/null +++ b/compat/libjpeg/jcprepct.c @@ -0,0 +1,358 @@ +/* + * jcprepct.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the compression preprocessing controller. + * This controller manages the color conversion, downsampling, + * and edge expansion steps. + * + * Most of the complexity here is associated with buffering input rows + * as required by the downsampler. See the comments at the head of + * jcsample.c for the downsampler's needs. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* At present, jcsample.c can request context rows only for smoothing. + * In the future, we might also need context rows for CCIR601 sampling + * or other more-complex downsampling procedures. The code to support + * context rows should be compiled only if needed. + */ +#ifdef INPUT_SMOOTHING_SUPPORTED +#define CONTEXT_ROWS_SUPPORTED +#endif + + +/* + * For the simple (no-context-row) case, we just need to buffer one + * row group's worth of pixels for the downsampling step. At the bottom of + * the image, we pad to a full row group by replicating the last pixel row. + * The downsampler's last output row is then replicated if needed to pad + * out to a full iMCU row. + * + * When providing context rows, we must buffer three row groups' worth of + * pixels. Three row groups are physically allocated, but the row pointer + * arrays are made five row groups high, with the extra pointers above and + * below "wrapping around" to point to the last and first real row groups. + * This allows the downsampler to access the proper context rows. + * At the top and bottom of the image, we create dummy context rows by + * copying the first or last real pixel row. This copying could be avoided + * by pointer hacking as is done in jdmainct.c, but it doesn't seem worth the + * trouble on the compression side. + */ + + +/* Private buffer controller object */ + +typedef struct { + struct jpeg_c_prep_controller pub; /* public fields */ + + /* Downsampling input buffer. This buffer holds color-converted data + * until we have enough to do a downsample step. + */ + JSAMPARRAY color_buf[MAX_COMPONENTS]; + + JDIMENSION rows_to_go; /* counts rows remaining in source image */ + int next_buf_row; /* index of next row to store in color_buf */ + +#ifdef CONTEXT_ROWS_SUPPORTED /* only needed for context case */ + int this_row_group; /* starting row index of group to process */ + int next_buf_stop; /* downsample when we reach this index */ +#endif +} my_prep_controller; + +typedef my_prep_controller * my_prep_ptr; + + +/* + * Initialize for a processing pass. + */ + +METHODDEF(void) +start_pass_prep (j_compress_ptr cinfo, J_BUF_MODE pass_mode) +{ + my_prep_ptr prep = (my_prep_ptr) cinfo->prep; + + if (pass_mode != JBUF_PASS_THRU) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + + /* Initialize total-height counter for detecting bottom of image */ + prep->rows_to_go = cinfo->image_height; + /* Mark the conversion buffer empty */ + prep->next_buf_row = 0; +#ifdef CONTEXT_ROWS_SUPPORTED + /* Preset additional state variables for context mode. + * These aren't used in non-context mode, so we needn't test which mode. + */ + prep->this_row_group = 0; + /* Set next_buf_stop to stop after two row groups have been read in. */ + prep->next_buf_stop = 2 * cinfo->max_v_samp_factor; +#endif +} + + +/* + * Expand an image vertically from height input_rows to height output_rows, + * by duplicating the bottom row. + */ + +LOCAL(void) +expand_bottom_edge (JSAMPARRAY image_data, JDIMENSION num_cols, + int input_rows, int output_rows) +{ + register int row; + + for (row = input_rows; row < output_rows; row++) { + jcopy_sample_rows(image_data, input_rows-1, image_data, row, + 1, num_cols); + } +} + + +/* + * Process some data in the simple no-context case. + * + * Preprocessor output data is counted in "row groups". A row group + * is defined to be v_samp_factor sample rows of each component. + * Downsampling will produce this much data from each max_v_samp_factor + * input rows. + */ + +METHODDEF(void) +pre_process_data (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, + JDIMENSION in_rows_avail, + JSAMPIMAGE output_buf, JDIMENSION *out_row_group_ctr, + JDIMENSION out_row_groups_avail) +{ + my_prep_ptr prep = (my_prep_ptr) cinfo->prep; + int numrows, ci; + JDIMENSION inrows; + jpeg_component_info * compptr; + + while (*in_row_ctr < in_rows_avail && + *out_row_group_ctr < out_row_groups_avail) { + /* Do color conversion to fill the conversion buffer. */ + inrows = in_rows_avail - *in_row_ctr; + numrows = cinfo->max_v_samp_factor - prep->next_buf_row; + numrows = (int) MIN((JDIMENSION) numrows, inrows); + (*cinfo->cconvert->color_convert) (cinfo, input_buf + *in_row_ctr, + prep->color_buf, + (JDIMENSION) prep->next_buf_row, + numrows); + *in_row_ctr += numrows; + prep->next_buf_row += numrows; + prep->rows_to_go -= numrows; + /* If at bottom of image, pad to fill the conversion buffer. */ + if (prep->rows_to_go == 0 && + prep->next_buf_row < cinfo->max_v_samp_factor) { + for (ci = 0; ci < cinfo->num_components; ci++) { + expand_bottom_edge(prep->color_buf[ci], cinfo->image_width, + prep->next_buf_row, cinfo->max_v_samp_factor); + } + prep->next_buf_row = cinfo->max_v_samp_factor; + } + /* If we've filled the conversion buffer, empty it. */ + if (prep->next_buf_row == cinfo->max_v_samp_factor) { + (*cinfo->downsample->downsample) (cinfo, + prep->color_buf, (JDIMENSION) 0, + output_buf, *out_row_group_ctr); + prep->next_buf_row = 0; + (*out_row_group_ctr)++; + } + /* If at bottom of image, pad the output to a full iMCU height. + * Note we assume the caller is providing a one-iMCU-height output buffer! + */ + if (prep->rows_to_go == 0 && + *out_row_group_ctr < out_row_groups_avail) { + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + numrows = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) / + cinfo->min_DCT_v_scaled_size; + expand_bottom_edge(output_buf[ci], + compptr->width_in_blocks * compptr->DCT_h_scaled_size, + (int) (*out_row_group_ctr * numrows), + (int) (out_row_groups_avail * numrows)); + } + *out_row_group_ctr = out_row_groups_avail; + break; /* can exit outer loop without test */ + } + } +} + + +#ifdef CONTEXT_ROWS_SUPPORTED + +/* + * Process some data in the context case. + */ + +METHODDEF(void) +pre_process_context (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, + JDIMENSION in_rows_avail, + JSAMPIMAGE output_buf, JDIMENSION *out_row_group_ctr, + JDIMENSION out_row_groups_avail) +{ + my_prep_ptr prep = (my_prep_ptr) cinfo->prep; + int numrows, ci; + int buf_height = cinfo->max_v_samp_factor * 3; + JDIMENSION inrows; + + while (*out_row_group_ctr < out_row_groups_avail) { + if (*in_row_ctr < in_rows_avail) { + /* Do color conversion to fill the conversion buffer. */ + inrows = in_rows_avail - *in_row_ctr; + numrows = prep->next_buf_stop - prep->next_buf_row; + numrows = (int) MIN((JDIMENSION) numrows, inrows); + (*cinfo->cconvert->color_convert) (cinfo, input_buf + *in_row_ctr, + prep->color_buf, + (JDIMENSION) prep->next_buf_row, + numrows); + /* Pad at top of image, if first time through */ + if (prep->rows_to_go == cinfo->image_height) { + for (ci = 0; ci < cinfo->num_components; ci++) { + int row; + for (row = 1; row <= cinfo->max_v_samp_factor; row++) { + jcopy_sample_rows(prep->color_buf[ci], 0, + prep->color_buf[ci], -row, + 1, cinfo->image_width); + } + } + } + *in_row_ctr += numrows; + prep->next_buf_row += numrows; + prep->rows_to_go -= numrows; + } else { + /* Return for more data, unless we are at the bottom of the image. */ + if (prep->rows_to_go != 0) + break; + /* When at bottom of image, pad to fill the conversion buffer. */ + if (prep->next_buf_row < prep->next_buf_stop) { + for (ci = 0; ci < cinfo->num_components; ci++) { + expand_bottom_edge(prep->color_buf[ci], cinfo->image_width, + prep->next_buf_row, prep->next_buf_stop); + } + prep->next_buf_row = prep->next_buf_stop; + } + } + /* If we've gotten enough data, downsample a row group. */ + if (prep->next_buf_row == prep->next_buf_stop) { + (*cinfo->downsample->downsample) (cinfo, + prep->color_buf, + (JDIMENSION) prep->this_row_group, + output_buf, *out_row_group_ctr); + (*out_row_group_ctr)++; + /* Advance pointers with wraparound as necessary. */ + prep->this_row_group += cinfo->max_v_samp_factor; + if (prep->this_row_group >= buf_height) + prep->this_row_group = 0; + if (prep->next_buf_row >= buf_height) + prep->next_buf_row = 0; + prep->next_buf_stop = prep->next_buf_row + cinfo->max_v_samp_factor; + } + } +} + + +/* + * Create the wrapped-around downsampling input buffer needed for context mode. + */ + +LOCAL(void) +create_context_buffer (j_compress_ptr cinfo) +{ + my_prep_ptr prep = (my_prep_ptr) cinfo->prep; + int rgroup_height = cinfo->max_v_samp_factor; + int ci, i; + jpeg_component_info * compptr; + JSAMPARRAY true_buffer, fake_buffer; + + /* Grab enough space for fake row pointers for all the components; + * we need five row groups' worth of pointers for each component. + */ + fake_buffer = (JSAMPARRAY) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (cinfo->num_components * 5 * rgroup_height) * + SIZEOF(JSAMPROW)); + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Allocate the actual buffer space (3 row groups) for this component. + * We make the buffer wide enough to allow the downsampler to edge-expand + * horizontally within the buffer, if it so chooses. + */ + true_buffer = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (JDIMENSION) (((long) compptr->width_in_blocks * + cinfo->min_DCT_h_scaled_size * + cinfo->max_h_samp_factor) / compptr->h_samp_factor), + (JDIMENSION) (3 * rgroup_height)); + /* Copy true buffer row pointers into the middle of the fake row array */ + MEMCOPY(fake_buffer + rgroup_height, true_buffer, + 3 * rgroup_height * SIZEOF(JSAMPROW)); + /* Fill in the above and below wraparound pointers */ + for (i = 0; i < rgroup_height; i++) { + fake_buffer[i] = true_buffer[2 * rgroup_height + i]; + fake_buffer[4 * rgroup_height + i] = true_buffer[i]; + } + prep->color_buf[ci] = fake_buffer + rgroup_height; + fake_buffer += 5 * rgroup_height; /* point to space for next component */ + } +} + +#endif /* CONTEXT_ROWS_SUPPORTED */ + + +/* + * Initialize preprocessing controller. + */ + +GLOBAL(void) +jinit_c_prep_controller (j_compress_ptr cinfo, boolean need_full_buffer) +{ + my_prep_ptr prep; + int ci; + jpeg_component_info * compptr; + + if (need_full_buffer) /* safety check */ + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + + prep = (my_prep_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_prep_controller)); + cinfo->prep = (struct jpeg_c_prep_controller *) prep; + prep->pub.start_pass = start_pass_prep; + + /* Allocate the color conversion buffer. + * We make the buffer wide enough to allow the downsampler to edge-expand + * horizontally within the buffer, if it so chooses. + */ + if (cinfo->downsample->need_context_rows) { + /* Set up to provide context rows */ +#ifdef CONTEXT_ROWS_SUPPORTED + prep->pub.pre_process_data = pre_process_context; + create_context_buffer(cinfo); +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } else { + /* No context, just make it tall enough for one row group */ + prep->pub.pre_process_data = pre_process_data; + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + prep->color_buf[ci] = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (JDIMENSION) (((long) compptr->width_in_blocks * + cinfo->min_DCT_h_scaled_size * + cinfo->max_h_samp_factor) / compptr->h_samp_factor), + (JDIMENSION) cinfo->max_v_samp_factor); + } + } +} diff --git a/compat/libjpeg/jcsample.c b/compat/libjpeg/jcsample.c new file mode 100755 index 0000000..1aef8a6 --- /dev/null +++ b/compat/libjpeg/jcsample.c @@ -0,0 +1,545 @@ +/* + * jcsample.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains downsampling routines. + * + * Downsampling input data is counted in "row groups". A row group + * is defined to be max_v_samp_factor pixel rows of each component, + * from which the downsampler produces v_samp_factor sample rows. + * A single row group is processed in each call to the downsampler module. + * + * The downsampler is responsible for edge-expansion of its output data + * to fill an integral number of DCT blocks horizontally. The source buffer + * may be modified if it is helpful for this purpose (the source buffer is + * allocated wide enough to correspond to the desired output width). + * The caller (the prep controller) is responsible for vertical padding. + * + * The downsampler may request "context rows" by setting need_context_rows + * during startup. In this case, the input arrays will contain at least + * one row group's worth of pixels above and below the passed-in data; + * the caller will create dummy rows at image top and bottom by replicating + * the first or last real pixel row. + * + * An excellent reference for image resampling is + * Digital Image Warping, George Wolberg, 1990. + * Pub. by IEEE Computer Society Press, Los Alamitos, CA. ISBN 0-8186-8944-7. + * + * The downsampling algorithm used here is a simple average of the source + * pixels covered by the output pixel. The hi-falutin sampling literature + * refers to this as a "box filter". In general the characteristics of a box + * filter are not very good, but for the specific cases we normally use (1:1 + * and 2:1 ratios) the box is equivalent to a "triangle filter" which is not + * nearly so bad. If you intend to use other sampling ratios, you'd be well + * advised to improve this code. + * + * A simple input-smoothing capability is provided. This is mainly intended + * for cleaning up color-dithered GIF input files (if you find it inadequate, + * we suggest using an external filtering program such as pnmconvol). When + * enabled, each input pixel P is replaced by a weighted sum of itself and its + * eight neighbors. P's weight is 1-8*SF and each neighbor's weight is SF, + * where SF = (smoothing_factor / 1024). + * Currently, smoothing is only supported for 2h2v sampling factors. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Pointer to routine to downsample a single component */ +typedef JMETHOD(void, downsample1_ptr, + (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY output_data)); + +/* Private subobject */ + +typedef struct { + struct jpeg_downsampler pub; /* public fields */ + + /* Downsampling method pointers, one per component */ + downsample1_ptr methods[MAX_COMPONENTS]; + + /* Height of an output row group for each component. */ + int rowgroup_height[MAX_COMPONENTS]; + + /* These arrays save pixel expansion factors so that int_downsample need not + * recompute them each time. They are unused for other downsampling methods. + */ + UINT8 h_expand[MAX_COMPONENTS]; + UINT8 v_expand[MAX_COMPONENTS]; +} my_downsampler; + +typedef my_downsampler * my_downsample_ptr; + + +/* + * Initialize for a downsampling pass. + */ + +METHODDEF(void) +start_pass_downsample (j_compress_ptr cinfo) +{ + /* no work for now */ +} + + +/* + * Expand a component horizontally from width input_cols to width output_cols, + * by duplicating the rightmost samples. + */ + +LOCAL(void) +expand_right_edge (JSAMPARRAY image_data, int num_rows, + JDIMENSION input_cols, JDIMENSION output_cols) +{ + register JSAMPROW ptr; + register JSAMPLE pixval; + register int count; + int row; + int numcols = (int) (output_cols - input_cols); + + if (numcols > 0) { + for (row = 0; row < num_rows; row++) { + ptr = image_data[row] + input_cols; + pixval = ptr[-1]; /* don't need GETJSAMPLE() here */ + for (count = numcols; count > 0; count--) + *ptr++ = pixval; + } + } +} + + +/* + * Do downsampling for a whole row group (all components). + * + * In this version we simply downsample each component independently. + */ + +METHODDEF(void) +sep_downsample (j_compress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION in_row_index, + JSAMPIMAGE output_buf, JDIMENSION out_row_group_index) +{ + my_downsample_ptr downsample = (my_downsample_ptr) cinfo->downsample; + int ci; + jpeg_component_info * compptr; + JSAMPARRAY in_ptr, out_ptr; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + in_ptr = input_buf[ci] + in_row_index; + out_ptr = output_buf[ci] + + (out_row_group_index * downsample->rowgroup_height[ci]); + (*downsample->methods[ci]) (cinfo, compptr, in_ptr, out_ptr); + } +} + + +/* + * Downsample pixel values of a single component. + * One row group is processed per call. + * This version handles arbitrary integral sampling ratios, without smoothing. + * Note that this version is not actually used for customary sampling ratios. + */ + +METHODDEF(void) +int_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY output_data) +{ + my_downsample_ptr downsample = (my_downsample_ptr) cinfo->downsample; + int inrow, outrow, h_expand, v_expand, numpix, numpix2, h, v; + JDIMENSION outcol, outcol_h; /* outcol_h == outcol*h_expand */ + JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size; + JSAMPROW inptr, outptr; + INT32 outvalue; + + h_expand = downsample->h_expand[compptr->component_index]; + v_expand = downsample->v_expand[compptr->component_index]; + numpix = h_expand * v_expand; + numpix2 = numpix/2; + + /* Expand input data enough to let all the output samples be generated + * by the standard loop. Special-casing padded output would be more + * efficient. + */ + expand_right_edge(input_data, cinfo->max_v_samp_factor, + cinfo->image_width, output_cols * h_expand); + + inrow = outrow = 0; + while (inrow < cinfo->max_v_samp_factor) { + outptr = output_data[outrow]; + for (outcol = 0, outcol_h = 0; outcol < output_cols; + outcol++, outcol_h += h_expand) { + outvalue = 0; + for (v = 0; v < v_expand; v++) { + inptr = input_data[inrow+v] + outcol_h; + for (h = 0; h < h_expand; h++) { + outvalue += (INT32) GETJSAMPLE(*inptr++); + } + } + *outptr++ = (JSAMPLE) ((outvalue + numpix2) / numpix); + } + inrow += v_expand; + outrow++; + } +} + + +/* + * Downsample pixel values of a single component. + * This version handles the special case of a full-size component, + * without smoothing. + */ + +METHODDEF(void) +fullsize_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY output_data) +{ + /* Copy the data */ + jcopy_sample_rows(input_data, 0, output_data, 0, + cinfo->max_v_samp_factor, cinfo->image_width); + /* Edge-expand */ + expand_right_edge(output_data, cinfo->max_v_samp_factor, cinfo->image_width, + compptr->width_in_blocks * compptr->DCT_h_scaled_size); +} + + +/* + * Downsample pixel values of a single component. + * This version handles the common case of 2:1 horizontal and 1:1 vertical, + * without smoothing. + * + * A note about the "bias" calculations: when rounding fractional values to + * integer, we do not want to always round 0.5 up to the next integer. + * If we did that, we'd introduce a noticeable bias towards larger values. + * Instead, this code is arranged so that 0.5 will be rounded up or down at + * alternate pixel locations (a simple ordered dither pattern). + */ + +METHODDEF(void) +h2v1_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY output_data) +{ + int inrow; + JDIMENSION outcol; + JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size; + register JSAMPROW inptr, outptr; + register int bias; + + /* Expand input data enough to let all the output samples be generated + * by the standard loop. Special-casing padded output would be more + * efficient. + */ + expand_right_edge(input_data, cinfo->max_v_samp_factor, + cinfo->image_width, output_cols * 2); + + for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) { + outptr = output_data[inrow]; + inptr = input_data[inrow]; + bias = 0; /* bias = 0,1,0,1,... for successive samples */ + for (outcol = 0; outcol < output_cols; outcol++) { + *outptr++ = (JSAMPLE) ((GETJSAMPLE(*inptr) + GETJSAMPLE(inptr[1]) + + bias) >> 1); + bias ^= 1; /* 0=>1, 1=>0 */ + inptr += 2; + } + } +} + + +/* + * Downsample pixel values of a single component. + * This version handles the standard case of 2:1 horizontal and 2:1 vertical, + * without smoothing. + */ + +METHODDEF(void) +h2v2_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY output_data) +{ + int inrow, outrow; + JDIMENSION outcol; + JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size; + register JSAMPROW inptr0, inptr1, outptr; + register int bias; + + /* Expand input data enough to let all the output samples be generated + * by the standard loop. Special-casing padded output would be more + * efficient. + */ + expand_right_edge(input_data, cinfo->max_v_samp_factor, + cinfo->image_width, output_cols * 2); + + inrow = outrow = 0; + while (inrow < cinfo->max_v_samp_factor) { + outptr = output_data[outrow]; + inptr0 = input_data[inrow]; + inptr1 = input_data[inrow+1]; + bias = 1; /* bias = 1,2,1,2,... for successive samples */ + for (outcol = 0; outcol < output_cols; outcol++) { + *outptr++ = (JSAMPLE) ((GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) + + GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]) + + bias) >> 2); + bias ^= 3; /* 1=>2, 2=>1 */ + inptr0 += 2; inptr1 += 2; + } + inrow += 2; + outrow++; + } +} + + +#ifdef INPUT_SMOOTHING_SUPPORTED + +/* + * Downsample pixel values of a single component. + * This version handles the standard case of 2:1 horizontal and 2:1 vertical, + * with smoothing. One row of context is required. + */ + +METHODDEF(void) +h2v2_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY output_data) +{ + int inrow, outrow; + JDIMENSION colctr; + JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size; + register JSAMPROW inptr0, inptr1, above_ptr, below_ptr, outptr; + INT32 membersum, neighsum, memberscale, neighscale; + + /* Expand input data enough to let all the output samples be generated + * by the standard loop. Special-casing padded output would be more + * efficient. + */ + expand_right_edge(input_data - 1, cinfo->max_v_samp_factor + 2, + cinfo->image_width, output_cols * 2); + + /* We don't bother to form the individual "smoothed" input pixel values; + * we can directly compute the output which is the average of the four + * smoothed values. Each of the four member pixels contributes a fraction + * (1-8*SF) to its own smoothed image and a fraction SF to each of the three + * other smoothed pixels, therefore a total fraction (1-5*SF)/4 to the final + * output. The four corner-adjacent neighbor pixels contribute a fraction + * SF to just one smoothed pixel, or SF/4 to the final output; while the + * eight edge-adjacent neighbors contribute SF to each of two smoothed + * pixels, or SF/2 overall. In order to use integer arithmetic, these + * factors are scaled by 2^16 = 65536. + * Also recall that SF = smoothing_factor / 1024. + */ + + memberscale = 16384 - cinfo->smoothing_factor * 80; /* scaled (1-5*SF)/4 */ + neighscale = cinfo->smoothing_factor * 16; /* scaled SF/4 */ + + inrow = outrow = 0; + while (inrow < cinfo->max_v_samp_factor) { + outptr = output_data[outrow]; + inptr0 = input_data[inrow]; + inptr1 = input_data[inrow+1]; + above_ptr = input_data[inrow-1]; + below_ptr = input_data[inrow+2]; + + /* Special case for first column: pretend column -1 is same as column 0 */ + membersum = GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) + + GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]); + neighsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[1]) + + GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[1]) + + GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[2]) + + GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[2]); + neighsum += neighsum; + neighsum += GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[2]) + + GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[2]); + membersum = membersum * memberscale + neighsum * neighscale; + *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16); + inptr0 += 2; inptr1 += 2; above_ptr += 2; below_ptr += 2; + + for (colctr = output_cols - 2; colctr > 0; colctr--) { + /* sum of pixels directly mapped to this output element */ + membersum = GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) + + GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]); + /* sum of edge-neighbor pixels */ + neighsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[1]) + + GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[1]) + + GETJSAMPLE(inptr0[-1]) + GETJSAMPLE(inptr0[2]) + + GETJSAMPLE(inptr1[-1]) + GETJSAMPLE(inptr1[2]); + /* The edge-neighbors count twice as much as corner-neighbors */ + neighsum += neighsum; + /* Add in the corner-neighbors */ + neighsum += GETJSAMPLE(above_ptr[-1]) + GETJSAMPLE(above_ptr[2]) + + GETJSAMPLE(below_ptr[-1]) + GETJSAMPLE(below_ptr[2]); + /* form final output scaled up by 2^16 */ + membersum = membersum * memberscale + neighsum * neighscale; + /* round, descale and output it */ + *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16); + inptr0 += 2; inptr1 += 2; above_ptr += 2; below_ptr += 2; + } + + /* Special case for last column */ + membersum = GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) + + GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]); + neighsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[1]) + + GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[1]) + + GETJSAMPLE(inptr0[-1]) + GETJSAMPLE(inptr0[1]) + + GETJSAMPLE(inptr1[-1]) + GETJSAMPLE(inptr1[1]); + neighsum += neighsum; + neighsum += GETJSAMPLE(above_ptr[-1]) + GETJSAMPLE(above_ptr[1]) + + GETJSAMPLE(below_ptr[-1]) + GETJSAMPLE(below_ptr[1]); + membersum = membersum * memberscale + neighsum * neighscale; + *outptr = (JSAMPLE) ((membersum + 32768) >> 16); + + inrow += 2; + outrow++; + } +} + + +/* + * Downsample pixel values of a single component. + * This version handles the special case of a full-size component, + * with smoothing. One row of context is required. + */ + +METHODDEF(void) +fullsize_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info *compptr, + JSAMPARRAY input_data, JSAMPARRAY output_data) +{ + int inrow; + JDIMENSION colctr; + JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size; + register JSAMPROW inptr, above_ptr, below_ptr, outptr; + INT32 membersum, neighsum, memberscale, neighscale; + int colsum, lastcolsum, nextcolsum; + + /* Expand input data enough to let all the output samples be generated + * by the standard loop. Special-casing padded output would be more + * efficient. + */ + expand_right_edge(input_data - 1, cinfo->max_v_samp_factor + 2, + cinfo->image_width, output_cols); + + /* Each of the eight neighbor pixels contributes a fraction SF to the + * smoothed pixel, while the main pixel contributes (1-8*SF). In order + * to use integer arithmetic, these factors are multiplied by 2^16 = 65536. + * Also recall that SF = smoothing_factor / 1024. + */ + + memberscale = 65536L - cinfo->smoothing_factor * 512L; /* scaled 1-8*SF */ + neighscale = cinfo->smoothing_factor * 64; /* scaled SF */ + + for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) { + outptr = output_data[inrow]; + inptr = input_data[inrow]; + above_ptr = input_data[inrow-1]; + below_ptr = input_data[inrow+1]; + + /* Special case for first column */ + colsum = GETJSAMPLE(*above_ptr++) + GETJSAMPLE(*below_ptr++) + + GETJSAMPLE(*inptr); + membersum = GETJSAMPLE(*inptr++); + nextcolsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(*below_ptr) + + GETJSAMPLE(*inptr); + neighsum = colsum + (colsum - membersum) + nextcolsum; + membersum = membersum * memberscale + neighsum * neighscale; + *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16); + lastcolsum = colsum; colsum = nextcolsum; + + for (colctr = output_cols - 2; colctr > 0; colctr--) { + membersum = GETJSAMPLE(*inptr++); + above_ptr++; below_ptr++; + nextcolsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(*below_ptr) + + GETJSAMPLE(*inptr); + neighsum = lastcolsum + (colsum - membersum) + nextcolsum; + membersum = membersum * memberscale + neighsum * neighscale; + *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16); + lastcolsum = colsum; colsum = nextcolsum; + } + + /* Special case for last column */ + membersum = GETJSAMPLE(*inptr); + neighsum = lastcolsum + (colsum - membersum) + colsum; + membersum = membersum * memberscale + neighsum * neighscale; + *outptr = (JSAMPLE) ((membersum + 32768) >> 16); + + } +} + +#endif /* INPUT_SMOOTHING_SUPPORTED */ + + +/* + * Module initialization routine for downsampling. + * Note that we must select a routine for each component. + */ + +GLOBAL(void) +jinit_downsampler (j_compress_ptr cinfo) +{ + my_downsample_ptr downsample; + int ci; + jpeg_component_info * compptr; + boolean smoothok = TRUE; + int h_in_group, v_in_group, h_out_group, v_out_group; + + downsample = (my_downsample_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_downsampler)); + cinfo->downsample = (struct jpeg_downsampler *) downsample; + downsample->pub.start_pass = start_pass_downsample; + downsample->pub.downsample = sep_downsample; + downsample->pub.need_context_rows = FALSE; + + if (cinfo->CCIR601_sampling) + ERREXIT(cinfo, JERR_CCIR601_NOTIMPL); + + /* Verify we can handle the sampling factors, and set up method pointers */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Compute size of an "output group" for DCT scaling. This many samples + * are to be converted from max_h_samp_factor * max_v_samp_factor pixels. + */ + h_out_group = (compptr->h_samp_factor * compptr->DCT_h_scaled_size) / + cinfo->min_DCT_h_scaled_size; + v_out_group = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) / + cinfo->min_DCT_v_scaled_size; + h_in_group = cinfo->max_h_samp_factor; + v_in_group = cinfo->max_v_samp_factor; + downsample->rowgroup_height[ci] = v_out_group; /* save for use later */ + if (h_in_group == h_out_group && v_in_group == v_out_group) { +#ifdef INPUT_SMOOTHING_SUPPORTED + if (cinfo->smoothing_factor) { + downsample->methods[ci] = fullsize_smooth_downsample; + downsample->pub.need_context_rows = TRUE; + } else +#endif + downsample->methods[ci] = fullsize_downsample; + } else if (h_in_group == h_out_group * 2 && + v_in_group == v_out_group) { + smoothok = FALSE; + downsample->methods[ci] = h2v1_downsample; + } else if (h_in_group == h_out_group * 2 && + v_in_group == v_out_group * 2) { +#ifdef INPUT_SMOOTHING_SUPPORTED + if (cinfo->smoothing_factor) { + downsample->methods[ci] = h2v2_smooth_downsample; + downsample->pub.need_context_rows = TRUE; + } else +#endif + downsample->methods[ci] = h2v2_downsample; + } else if ((h_in_group % h_out_group) == 0 && + (v_in_group % v_out_group) == 0) { + smoothok = FALSE; + downsample->methods[ci] = int_downsample; + downsample->h_expand[ci] = (UINT8) (h_in_group / h_out_group); + downsample->v_expand[ci] = (UINT8) (v_in_group / v_out_group); + } else + ERREXIT(cinfo, JERR_FRACT_SAMPLE_NOTIMPL); + } + +#ifdef INPUT_SMOOTHING_SUPPORTED + if (cinfo->smoothing_factor && !smoothok) + TRACEMS(cinfo, 0, JTRC_SMOOTH_NOTIMPL); +#endif +} diff --git a/compat/libjpeg/jctrans.c b/compat/libjpeg/jctrans.c new file mode 100755 index 0000000..38f06e0 --- /dev/null +++ b/compat/libjpeg/jctrans.c @@ -0,0 +1,385 @@ +/* + * jctrans.c + * + * Copyright (C) 1995-1998, Thomas G. Lane. + * Modified 2000-2013 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains library routines for transcoding compression, + * that is, writing raw DCT coefficient arrays to an output JPEG file. + * The routines in jcapimin.c will also be needed by a transcoder. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Forward declarations */ +LOCAL(void) transencode_master_selection + JPP((j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays)); +LOCAL(void) transencode_coef_controller + JPP((j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays)); + + +/* + * Compression initialization for writing raw-coefficient data. + * Before calling this, all parameters and a data destination must be set up. + * Call jpeg_finish_compress() to actually write the data. + * + * The number of passed virtual arrays must match cinfo->num_components. + * Note that the virtual arrays need not be filled or even realized at + * the time write_coefficients is called; indeed, if the virtual arrays + * were requested from this compression object's memory manager, they + * typically will be realized during this routine and filled afterwards. + */ + +GLOBAL(void) +jpeg_write_coefficients (j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays) +{ + if (cinfo->global_state != CSTATE_START) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + /* Mark all tables to be written */ + jpeg_suppress_tables(cinfo, FALSE); + /* (Re)initialize error mgr and destination modules */ + (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo); + (*cinfo->dest->init_destination) (cinfo); + /* Perform master selection of active modules */ + transencode_master_selection(cinfo, coef_arrays); + /* Wait for jpeg_finish_compress() call */ + cinfo->next_scanline = 0; /* so jpeg_write_marker works */ + cinfo->global_state = CSTATE_WRCOEFS; +} + + +/* + * Initialize the compression object with default parameters, + * then copy from the source object all parameters needed for lossless + * transcoding. Parameters that can be varied without loss (such as + * scan script and Huffman optimization) are left in their default states. + */ + +GLOBAL(void) +jpeg_copy_critical_parameters (j_decompress_ptr srcinfo, + j_compress_ptr dstinfo) +{ + JQUANT_TBL ** qtblptr; + jpeg_component_info *incomp, *outcomp; + JQUANT_TBL *c_quant, *slot_quant; + int tblno, ci, coefi; + + /* Safety check to ensure start_compress not called yet. */ + if (dstinfo->global_state != CSTATE_START) + ERREXIT1(dstinfo, JERR_BAD_STATE, dstinfo->global_state); + /* Copy fundamental image dimensions */ + dstinfo->image_width = srcinfo->image_width; + dstinfo->image_height = srcinfo->image_height; + dstinfo->input_components = srcinfo->num_components; + dstinfo->in_color_space = srcinfo->jpeg_color_space; + dstinfo->jpeg_width = srcinfo->output_width; + dstinfo->jpeg_height = srcinfo->output_height; + dstinfo->min_DCT_h_scaled_size = srcinfo->min_DCT_h_scaled_size; + dstinfo->min_DCT_v_scaled_size = srcinfo->min_DCT_v_scaled_size; + /* Initialize all parameters to default values */ + jpeg_set_defaults(dstinfo); + /* jpeg_set_defaults may choose wrong colorspace, eg YCbCr if input is RGB. + * Fix it to get the right header markers for the image colorspace. + * Note: Entropy table assignment in jpeg_set_colorspace depends + * on color_transform. + */ + dstinfo->color_transform = srcinfo->color_transform; + jpeg_set_colorspace(dstinfo, srcinfo->jpeg_color_space); + dstinfo->data_precision = srcinfo->data_precision; + dstinfo->CCIR601_sampling = srcinfo->CCIR601_sampling; + /* Copy the source's quantization tables. */ + for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) { + if (srcinfo->quant_tbl_ptrs[tblno] != NULL) { + qtblptr = & dstinfo->quant_tbl_ptrs[tblno]; + if (*qtblptr == NULL) + *qtblptr = jpeg_alloc_quant_table((j_common_ptr) dstinfo); + MEMCOPY((*qtblptr)->quantval, + srcinfo->quant_tbl_ptrs[tblno]->quantval, + SIZEOF((*qtblptr)->quantval)); + (*qtblptr)->sent_table = FALSE; + } + } + /* Copy the source's per-component info. + * Note we assume jpeg_set_defaults has allocated the dest comp_info array. + */ + dstinfo->num_components = srcinfo->num_components; + if (dstinfo->num_components < 1 || dstinfo->num_components > MAX_COMPONENTS) + ERREXIT2(dstinfo, JERR_COMPONENT_COUNT, dstinfo->num_components, + MAX_COMPONENTS); + for (ci = 0, incomp = srcinfo->comp_info, outcomp = dstinfo->comp_info; + ci < dstinfo->num_components; ci++, incomp++, outcomp++) { + outcomp->component_id = incomp->component_id; + outcomp->h_samp_factor = incomp->h_samp_factor; + outcomp->v_samp_factor = incomp->v_samp_factor; + outcomp->quant_tbl_no = incomp->quant_tbl_no; + /* Make sure saved quantization table for component matches the qtable + * slot. If not, the input file re-used this qtable slot. + * IJG encoder currently cannot duplicate this. + */ + tblno = outcomp->quant_tbl_no; + if (tblno < 0 || tblno >= NUM_QUANT_TBLS || + srcinfo->quant_tbl_ptrs[tblno] == NULL) + ERREXIT1(dstinfo, JERR_NO_QUANT_TABLE, tblno); + slot_quant = srcinfo->quant_tbl_ptrs[tblno]; + c_quant = incomp->quant_table; + if (c_quant != NULL) { + for (coefi = 0; coefi < DCTSIZE2; coefi++) { + if (c_quant->quantval[coefi] != slot_quant->quantval[coefi]) + ERREXIT1(dstinfo, JERR_MISMATCHED_QUANT_TABLE, tblno); + } + } + /* Note: we do not copy the source's entropy table assignments; + * instead we rely on jpeg_set_colorspace to have made a suitable choice. + */ + } + /* Also copy JFIF version and resolution information, if available. + * Strictly speaking this isn't "critical" info, but it's nearly + * always appropriate to copy it if available. In particular, + * if the application chooses to copy JFIF 1.02 extension markers from + * the source file, we need to copy the version to make sure we don't + * emit a file that has 1.02 extensions but a claimed version of 1.01. + */ + if (srcinfo->saw_JFIF_marker) { + if (srcinfo->JFIF_major_version == 1 || + srcinfo->JFIF_major_version == 2) { + dstinfo->JFIF_major_version = srcinfo->JFIF_major_version; + dstinfo->JFIF_minor_version = srcinfo->JFIF_minor_version; + } + dstinfo->density_unit = srcinfo->density_unit; + dstinfo->X_density = srcinfo->X_density; + dstinfo->Y_density = srcinfo->Y_density; + } +} + + +/* + * Master selection of compression modules for transcoding. + * This substitutes for jcinit.c's initialization of the full compressor. + */ + +LOCAL(void) +transencode_master_selection (j_compress_ptr cinfo, + jvirt_barray_ptr * coef_arrays) +{ + /* Initialize master control (includes parameter checking/processing) */ + jinit_c_master_control(cinfo, TRUE /* transcode only */); + + /* Entropy encoding: either Huffman or arithmetic coding. */ + if (cinfo->arith_code) + jinit_arith_encoder(cinfo); + else { + jinit_huff_encoder(cinfo); + } + + /* We need a special coefficient buffer controller. */ + transencode_coef_controller(cinfo, coef_arrays); + + jinit_marker_writer(cinfo); + + /* We can now tell the memory manager to allocate virtual arrays. */ + (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo); + + /* Write the datastream header (SOI, JFIF) immediately. + * Frame and scan headers are postponed till later. + * This lets application insert special markers after the SOI. + */ + (*cinfo->marker->write_file_header) (cinfo); +} + + +/* + * The rest of this file is a special implementation of the coefficient + * buffer controller. This is similar to jccoefct.c, but it handles only + * output from presupplied virtual arrays. Furthermore, we generate any + * dummy padding blocks on-the-fly rather than expecting them to be present + * in the arrays. + */ + +/* Private buffer controller object */ + +typedef struct { + struct jpeg_c_coef_controller pub; /* public fields */ + + JDIMENSION iMCU_row_num; /* iMCU row # within image */ + JDIMENSION mcu_ctr; /* counts MCUs processed in current row */ + int MCU_vert_offset; /* counts MCU rows within iMCU row */ + int MCU_rows_per_iMCU_row; /* number of such rows needed */ + + /* Virtual block array for each component. */ + jvirt_barray_ptr * whole_image; + + /* Workspace for constructing dummy blocks at right/bottom edges. */ + JBLOCKROW dummy_buffer[C_MAX_BLOCKS_IN_MCU]; +} my_coef_controller; + +typedef my_coef_controller * my_coef_ptr; + + +LOCAL(void) +start_iMCU_row (j_compress_ptr cinfo) +/* Reset within-iMCU-row counters for a new row */ +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + + /* In an interleaved scan, an MCU row is the same as an iMCU row. + * In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows. + * But at the bottom of the image, process only what's left. + */ + if (cinfo->comps_in_scan > 1) { + coef->MCU_rows_per_iMCU_row = 1; + } else { + if (coef->iMCU_row_num < (cinfo->total_iMCU_rows-1)) + coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor; + else + coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height; + } + + coef->mcu_ctr = 0; + coef->MCU_vert_offset = 0; +} + + +/* + * Initialize for a processing pass. + */ + +METHODDEF(void) +start_pass_coef (j_compress_ptr cinfo, J_BUF_MODE pass_mode) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + + if (pass_mode != JBUF_CRANK_DEST) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + + coef->iMCU_row_num = 0; + start_iMCU_row(cinfo); +} + + +/* + * Process some data. + * We process the equivalent of one fully interleaved MCU row ("iMCU" row) + * per call, ie, v_samp_factor block rows for each component in the scan. + * The data is obtained from the virtual arrays and fed to the entropy coder. + * Returns TRUE if the iMCU row is completed, FALSE if suspended. + * + * NB: input_buf is ignored; it is likely to be a NULL pointer. + */ + +METHODDEF(boolean) +compress_output (j_compress_ptr cinfo, JSAMPIMAGE input_buf) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + JDIMENSION MCU_col_num; /* index of current MCU within row */ + JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1; + JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; + int blkn, ci, xindex, yindex, yoffset, blockcnt; + JDIMENSION start_col; + JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN]; + JBLOCKROW MCU_buffer[C_MAX_BLOCKS_IN_MCU]; + JBLOCKROW buffer_ptr; + jpeg_component_info *compptr; + + /* Align the virtual buffers for the components used in this scan. */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + buffer[ci] = (*cinfo->mem->access_virt_barray) + ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index], + coef->iMCU_row_num * compptr->v_samp_factor, + (JDIMENSION) compptr->v_samp_factor, FALSE); + } + + /* Loop to process one whole iMCU row */ + for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; + yoffset++) { + for (MCU_col_num = coef->mcu_ctr; MCU_col_num < cinfo->MCUs_per_row; + MCU_col_num++) { + /* Construct list of pointers to DCT blocks belonging to this MCU */ + blkn = 0; /* index of current DCT block within MCU */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + start_col = MCU_col_num * compptr->MCU_width; + blockcnt = (MCU_col_num < last_MCU_col) ? compptr->MCU_width + : compptr->last_col_width; + for (yindex = 0; yindex < compptr->MCU_height; yindex++) { + if (coef->iMCU_row_num < last_iMCU_row || + yindex+yoffset < compptr->last_row_height) { + /* Fill in pointers to real blocks in this row */ + buffer_ptr = buffer[ci][yindex+yoffset] + start_col; + for (xindex = 0; xindex < blockcnt; xindex++) + MCU_buffer[blkn++] = buffer_ptr++; + } else { + /* At bottom of image, need a whole row of dummy blocks */ + xindex = 0; + } + /* Fill in any dummy blocks needed in this row. + * Dummy blocks are filled in the same way as in jccoefct.c: + * all zeroes in the AC entries, DC entries equal to previous + * block's DC value. The init routine has already zeroed the + * AC entries, so we need only set the DC entries correctly. + */ + for (; xindex < compptr->MCU_width; xindex++) { + MCU_buffer[blkn] = coef->dummy_buffer[blkn]; + MCU_buffer[blkn][0][0] = MCU_buffer[blkn-1][0][0]; + blkn++; + } + } + } + /* Try to write the MCU. */ + if (! (*cinfo->entropy->encode_mcu) (cinfo, MCU_buffer)) { + /* Suspension forced; update state counters and exit */ + coef->MCU_vert_offset = yoffset; + coef->mcu_ctr = MCU_col_num; + return FALSE; + } + } + /* Completed an MCU row, but perhaps not an iMCU row */ + coef->mcu_ctr = 0; + } + /* Completed the iMCU row, advance counters for next one */ + coef->iMCU_row_num++; + start_iMCU_row(cinfo); + return TRUE; +} + + +/* + * Initialize coefficient buffer controller. + * + * Each passed coefficient array must be the right size for that + * coefficient: width_in_blocks wide and height_in_blocks high, + * with unitheight at least v_samp_factor. + */ + +LOCAL(void) +transencode_coef_controller (j_compress_ptr cinfo, + jvirt_barray_ptr * coef_arrays) +{ + my_coef_ptr coef; + JBLOCKROW buffer; + int i; + + coef = (my_coef_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_coef_controller)); + cinfo->coef = &coef->pub; + coef->pub.start_pass = start_pass_coef; + coef->pub.compress_data = compress_output; + + /* Save pointer to virtual arrays */ + coef->whole_image = coef_arrays; + + /* Allocate and pre-zero space for dummy DCT blocks. */ + buffer = (JBLOCKROW) + (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, + C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)); + FMEMZERO((void FAR *) buffer, C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)); + for (i = 0; i < C_MAX_BLOCKS_IN_MCU; i++) { + coef->dummy_buffer[i] = buffer + i; + } +} diff --git a/compat/libjpeg/jdapimin.c b/compat/libjpeg/jdapimin.c new file mode 100755 index 0000000..c1b88f7 --- /dev/null +++ b/compat/libjpeg/jdapimin.c @@ -0,0 +1,399 @@ +/* + * jdapimin.c + * + * Copyright (C) 1994-1998, Thomas G. Lane. + * Modified 2009-2013 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains application interface code for the decompression half + * of the JPEG library. These are the "minimum" API routines that may be + * needed in either the normal full-decompression case or the + * transcoding-only case. + * + * Most of the routines intended to be called directly by an application + * are in this file or in jdapistd.c. But also see jcomapi.c for routines + * shared by compression and decompression, and jdtrans.c for the transcoding + * case. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * Initialization of a JPEG decompression object. + * The error manager must already be set up (in case memory manager fails). + */ + +GLOBAL(void) +jpeg_CreateDecompress (j_decompress_ptr cinfo, int version, size_t structsize) +{ + int i; + + /* Guard against version mismatches between library and caller. */ + cinfo->mem = NULL; /* so jpeg_destroy knows mem mgr not called */ + if (version != JPEG_LIB_VERSION) + ERREXIT2(cinfo, JERR_BAD_LIB_VERSION, JPEG_LIB_VERSION, version); + if (structsize != SIZEOF(struct jpeg_decompress_struct)) + ERREXIT2(cinfo, JERR_BAD_STRUCT_SIZE, + (int) SIZEOF(struct jpeg_decompress_struct), (int) structsize); + + /* For debugging purposes, we zero the whole master structure. + * But the application has already set the err pointer, and may have set + * client_data, so we have to save and restore those fields. + * Note: if application hasn't set client_data, tools like Purify may + * complain here. + */ + { + struct jpeg_error_mgr * err = cinfo->err; + void * client_data = cinfo->client_data; /* ignore Purify complaint here */ + MEMZERO(cinfo, SIZEOF(struct jpeg_decompress_struct)); + cinfo->err = err; + cinfo->client_data = client_data; + } + cinfo->is_decompressor = TRUE; + + /* Initialize a memory manager instance for this object */ + jinit_memory_mgr((j_common_ptr) cinfo); + + /* Zero out pointers to permanent structures. */ + cinfo->progress = NULL; + cinfo->src = NULL; + + for (i = 0; i < NUM_QUANT_TBLS; i++) + cinfo->quant_tbl_ptrs[i] = NULL; + + for (i = 0; i < NUM_HUFF_TBLS; i++) { + cinfo->dc_huff_tbl_ptrs[i] = NULL; + cinfo->ac_huff_tbl_ptrs[i] = NULL; + } + + /* Initialize marker processor so application can override methods + * for COM, APPn markers before calling jpeg_read_header. + */ + cinfo->marker_list = NULL; + jinit_marker_reader(cinfo); + + /* And initialize the overall input controller. */ + jinit_input_controller(cinfo); + + /* OK, I'm ready */ + cinfo->global_state = DSTATE_START; +} + + +/* + * Destruction of a JPEG decompression object + */ + +GLOBAL(void) +jpeg_destroy_decompress (j_decompress_ptr cinfo) +{ + jpeg_destroy((j_common_ptr) cinfo); /* use common routine */ +} + + +/* + * Abort processing of a JPEG decompression operation, + * but don't destroy the object itself. + */ + +GLOBAL(void) +jpeg_abort_decompress (j_decompress_ptr cinfo) +{ + jpeg_abort((j_common_ptr) cinfo); /* use common routine */ +} + + +/* + * Set default decompression parameters. + */ + +LOCAL(void) +default_decompress_parms (j_decompress_ptr cinfo) +{ + int cid0, cid1, cid2; + + /* Guess the input colorspace, and set output colorspace accordingly. */ + /* Note application may override our guesses. */ + switch (cinfo->num_components) { + case 1: + cinfo->jpeg_color_space = JCS_GRAYSCALE; + cinfo->out_color_space = JCS_GRAYSCALE; + break; + + case 3: + cid0 = cinfo->comp_info[0].component_id; + cid1 = cinfo->comp_info[1].component_id; + cid2 = cinfo->comp_info[2].component_id; + + /* First try to guess from the component IDs */ + if (cid0 == 0x01 && cid1 == 0x02 && cid2 == 0x03) + cinfo->jpeg_color_space = JCS_YCbCr; + else if (cid0 == 0x01 && cid1 == 0x22 && cid2 == 0x23) + cinfo->jpeg_color_space = JCS_BG_YCC; + else if (cid0 == 0x52 && cid1 == 0x47 && cid2 == 0x42) + cinfo->jpeg_color_space = JCS_RGB; /* ASCII 'R', 'G', 'B' */ + else if (cid0 == 0x72 && cid1 == 0x67 && cid2 == 0x62) + cinfo->jpeg_color_space = JCS_BG_RGB; /* ASCII 'r', 'g', 'b' */ + else if (cinfo->saw_JFIF_marker) + cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */ + else if (cinfo->saw_Adobe_marker) { + switch (cinfo->Adobe_transform) { + case 0: + cinfo->jpeg_color_space = JCS_RGB; + break; + case 1: + cinfo->jpeg_color_space = JCS_YCbCr; + break; + default: + WARNMS1(cinfo, JWRN_ADOBE_XFORM, cinfo->Adobe_transform); + cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */ + break; + } + } else { + TRACEMS3(cinfo, 1, JTRC_UNKNOWN_IDS, cid0, cid1, cid2); + cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */ + } + /* Always guess RGB is proper output colorspace. */ + cinfo->out_color_space = JCS_RGB; + break; + + case 4: + if (cinfo->saw_Adobe_marker) { + switch (cinfo->Adobe_transform) { + case 0: + cinfo->jpeg_color_space = JCS_CMYK; + break; + case 2: + cinfo->jpeg_color_space = JCS_YCCK; + break; + default: + WARNMS1(cinfo, JWRN_ADOBE_XFORM, cinfo->Adobe_transform); + cinfo->jpeg_color_space = JCS_YCCK; /* assume it's YCCK */ + break; + } + } else { + /* No special markers, assume straight CMYK. */ + cinfo->jpeg_color_space = JCS_CMYK; + } + cinfo->out_color_space = JCS_CMYK; + break; + + default: + cinfo->jpeg_color_space = JCS_UNKNOWN; + cinfo->out_color_space = JCS_UNKNOWN; + break; + } + + /* Set defaults for other decompression parameters. */ + cinfo->scale_num = cinfo->block_size; /* 1:1 scaling */ + cinfo->scale_denom = cinfo->block_size; + cinfo->output_gamma = 1.0; + cinfo->buffered_image = FALSE; + cinfo->raw_data_out = FALSE; + cinfo->dct_method = JDCT_DEFAULT; + cinfo->do_fancy_upsampling = TRUE; + cinfo->do_block_smoothing = TRUE; + cinfo->quantize_colors = FALSE; + /* We set these in case application only sets quantize_colors. */ + cinfo->dither_mode = JDITHER_FS; +#ifdef QUANT_2PASS_SUPPORTED + cinfo->two_pass_quantize = TRUE; +#else + cinfo->two_pass_quantize = FALSE; +#endif + cinfo->desired_number_of_colors = 256; + cinfo->colormap = NULL; + /* Initialize for no mode change in buffered-image mode. */ + cinfo->enable_1pass_quant = FALSE; + cinfo->enable_external_quant = FALSE; + cinfo->enable_2pass_quant = FALSE; +} + + +/* + * Decompression startup: read start of JPEG datastream to see what's there. + * Need only initialize JPEG object and supply a data source before calling. + * + * This routine will read as far as the first SOS marker (ie, actual start of + * compressed data), and will save all tables and parameters in the JPEG + * object. It will also initialize the decompression parameters to default + * values, and finally return JPEG_HEADER_OK. On return, the application may + * adjust the decompression parameters and then call jpeg_start_decompress. + * (Or, if the application only wanted to determine the image parameters, + * the data need not be decompressed. In that case, call jpeg_abort or + * jpeg_destroy to release any temporary space.) + * If an abbreviated (tables only) datastream is presented, the routine will + * return JPEG_HEADER_TABLES_ONLY upon reaching EOI. The application may then + * re-use the JPEG object to read the abbreviated image datastream(s). + * It is unnecessary (but OK) to call jpeg_abort in this case. + * The JPEG_SUSPENDED return code only occurs if the data source module + * requests suspension of the decompressor. In this case the application + * should load more source data and then re-call jpeg_read_header to resume + * processing. + * If a non-suspending data source is used and require_image is TRUE, then the + * return code need not be inspected since only JPEG_HEADER_OK is possible. + * + * This routine is now just a front end to jpeg_consume_input, with some + * extra error checking. + */ + +GLOBAL(int) +jpeg_read_header (j_decompress_ptr cinfo, boolean require_image) +{ + int retcode; + + if (cinfo->global_state != DSTATE_START && + cinfo->global_state != DSTATE_INHEADER) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + retcode = jpeg_consume_input(cinfo); + + switch (retcode) { + case JPEG_REACHED_SOS: + retcode = JPEG_HEADER_OK; + break; + case JPEG_REACHED_EOI: + if (require_image) /* Complain if application wanted an image */ + ERREXIT(cinfo, JERR_NO_IMAGE); + /* Reset to start state; it would be safer to require the application to + * call jpeg_abort, but we can't change it now for compatibility reasons. + * A side effect is to free any temporary memory (there shouldn't be any). + */ + jpeg_abort((j_common_ptr) cinfo); /* sets state = DSTATE_START */ + retcode = JPEG_HEADER_TABLES_ONLY; + break; + case JPEG_SUSPENDED: + /* no work */ + break; + } + + return retcode; +} + + +/* + * Consume data in advance of what the decompressor requires. + * This can be called at any time once the decompressor object has + * been created and a data source has been set up. + * + * This routine is essentially a state machine that handles a couple + * of critical state-transition actions, namely initial setup and + * transition from header scanning to ready-for-start_decompress. + * All the actual input is done via the input controller's consume_input + * method. + */ + +GLOBAL(int) +jpeg_consume_input (j_decompress_ptr cinfo) +{ + int retcode = JPEG_SUSPENDED; + + /* NB: every possible DSTATE value should be listed in this switch */ + switch (cinfo->global_state) { + case DSTATE_START: + /* Start-of-datastream actions: reset appropriate modules */ + (*cinfo->inputctl->reset_input_controller) (cinfo); + /* Initialize application's data source module */ + (*cinfo->src->init_source) (cinfo); + cinfo->global_state = DSTATE_INHEADER; + /*FALLTHROUGH*/ + case DSTATE_INHEADER: + retcode = (*cinfo->inputctl->consume_input) (cinfo); + if (retcode == JPEG_REACHED_SOS) { /* Found SOS, prepare to decompress */ + /* Set up default parameters based on header data */ + default_decompress_parms(cinfo); + /* Set global state: ready for start_decompress */ + cinfo->global_state = DSTATE_READY; + } + break; + case DSTATE_READY: + /* Can't advance past first SOS until start_decompress is called */ + retcode = JPEG_REACHED_SOS; + break; + case DSTATE_PRELOAD: + case DSTATE_PRESCAN: + case DSTATE_SCANNING: + case DSTATE_RAW_OK: + case DSTATE_BUFIMAGE: + case DSTATE_BUFPOST: + case DSTATE_STOPPING: + retcode = (*cinfo->inputctl->consume_input) (cinfo); + break; + default: + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + } + return retcode; +} + + +/* + * Have we finished reading the input file? + */ + +GLOBAL(boolean) +jpeg_input_complete (j_decompress_ptr cinfo) +{ + /* Check for valid jpeg object */ + if (cinfo->global_state < DSTATE_START || + cinfo->global_state > DSTATE_STOPPING) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + return cinfo->inputctl->eoi_reached; +} + + +/* + * Is there more than one scan? + */ + +GLOBAL(boolean) +jpeg_has_multiple_scans (j_decompress_ptr cinfo) +{ + /* Only valid after jpeg_read_header completes */ + if (cinfo->global_state < DSTATE_READY || + cinfo->global_state > DSTATE_STOPPING) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + return cinfo->inputctl->has_multiple_scans; +} + + +/* + * Finish JPEG decompression. + * + * This will normally just verify the file trailer and release temp storage. + * + * Returns FALSE if suspended. The return value need be inspected only if + * a suspending data source is used. + */ + +GLOBAL(boolean) +jpeg_finish_decompress (j_decompress_ptr cinfo) +{ + if ((cinfo->global_state == DSTATE_SCANNING || + cinfo->global_state == DSTATE_RAW_OK) && ! cinfo->buffered_image) { + /* Terminate final pass of non-buffered mode */ + if (cinfo->output_scanline < cinfo->output_height) + ERREXIT(cinfo, JERR_TOO_LITTLE_DATA); + (*cinfo->master->finish_output_pass) (cinfo); + cinfo->global_state = DSTATE_STOPPING; + } else if (cinfo->global_state == DSTATE_BUFIMAGE) { + /* Finishing after a buffered-image operation */ + cinfo->global_state = DSTATE_STOPPING; + } else if (cinfo->global_state != DSTATE_STOPPING) { + /* STOPPING = repeat call after a suspension, anything else is error */ + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + } + /* Read until EOI */ + while (! cinfo->inputctl->eoi_reached) { + if ((*cinfo->inputctl->consume_input) (cinfo) == JPEG_SUSPENDED) + return FALSE; /* Suspend, come back later */ + } + /* Do final cleanup */ + (*cinfo->src->term_source) (cinfo); + /* We can use jpeg_abort to release memory and reset global_state */ + jpeg_abort((j_common_ptr) cinfo); + return TRUE; +} diff --git a/compat/libjpeg/jdapistd.c b/compat/libjpeg/jdapistd.c new file mode 100755 index 0000000..6437dc5 --- /dev/null +++ b/compat/libjpeg/jdapistd.c @@ -0,0 +1,276 @@ +/* + * jdapistd.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2002-2013 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains application interface code for the decompression half + * of the JPEG library. These are the "standard" API routines that are + * used in the normal full-decompression case. They are not used by a + * transcoding-only application. Note that if an application links in + * jpeg_start_decompress, it will end up linking in the entire decompressor. + * We thus must separate this file from jdapimin.c to avoid linking the + * whole decompression library into a transcoder. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Forward declarations */ +LOCAL(boolean) output_pass_setup JPP((j_decompress_ptr cinfo)); + + +/* + * Decompression initialization. + * jpeg_read_header must be completed before calling this. + * + * If a multipass operating mode was selected, this will do all but the + * last pass, and thus may take a great deal of time. + * + * Returns FALSE if suspended. The return value need be inspected only if + * a suspending data source is used. + */ + +GLOBAL(boolean) +jpeg_start_decompress (j_decompress_ptr cinfo) +{ + if (cinfo->global_state == DSTATE_READY) { + /* First call: initialize master control, select active modules */ + jinit_master_decompress(cinfo); + if (cinfo->buffered_image) { + /* No more work here; expecting jpeg_start_output next */ + cinfo->global_state = DSTATE_BUFIMAGE; + return TRUE; + } + cinfo->global_state = DSTATE_PRELOAD; + } + if (cinfo->global_state == DSTATE_PRELOAD) { + /* If file has multiple scans, absorb them all into the coef buffer */ + if (cinfo->inputctl->has_multiple_scans) { +#ifdef D_MULTISCAN_FILES_SUPPORTED + for (;;) { + int retcode; + /* Call progress monitor hook if present */ + if (cinfo->progress != NULL) + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + /* Absorb some more input */ + retcode = (*cinfo->inputctl->consume_input) (cinfo); + if (retcode == JPEG_SUSPENDED) + return FALSE; + if (retcode == JPEG_REACHED_EOI) + break; + /* Advance progress counter if appropriate */ + if (cinfo->progress != NULL && + (retcode == JPEG_ROW_COMPLETED || retcode == JPEG_REACHED_SOS)) { + if (++cinfo->progress->pass_counter >= cinfo->progress->pass_limit) { + /* jdmaster underestimated number of scans; ratchet up one scan */ + cinfo->progress->pass_limit += (long) cinfo->total_iMCU_rows; + } + } + } +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif /* D_MULTISCAN_FILES_SUPPORTED */ + } + cinfo->output_scan_number = cinfo->input_scan_number; + } else if (cinfo->global_state != DSTATE_PRESCAN) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + /* Perform any dummy output passes, and set up for the final pass */ + return output_pass_setup(cinfo); +} + + +/* + * Set up for an output pass, and perform any dummy pass(es) needed. + * Common subroutine for jpeg_start_decompress and jpeg_start_output. + * Entry: global_state = DSTATE_PRESCAN only if previously suspended. + * Exit: If done, returns TRUE and sets global_state for proper output mode. + * If suspended, returns FALSE and sets global_state = DSTATE_PRESCAN. + */ + +LOCAL(boolean) +output_pass_setup (j_decompress_ptr cinfo) +{ + if (cinfo->global_state != DSTATE_PRESCAN) { + /* First call: do pass setup */ + (*cinfo->master->prepare_for_output_pass) (cinfo); + cinfo->output_scanline = 0; + cinfo->global_state = DSTATE_PRESCAN; + } + /* Loop over any required dummy passes */ + while (cinfo->master->is_dummy_pass) { +#ifdef QUANT_2PASS_SUPPORTED + /* Crank through the dummy pass */ + while (cinfo->output_scanline < cinfo->output_height) { + JDIMENSION last_scanline; + /* Call progress monitor hook if present */ + if (cinfo->progress != NULL) { + cinfo->progress->pass_counter = (long) cinfo->output_scanline; + cinfo->progress->pass_limit = (long) cinfo->output_height; + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + } + /* Process some data */ + last_scanline = cinfo->output_scanline; + (*cinfo->main->process_data) (cinfo, (JSAMPARRAY) NULL, + &cinfo->output_scanline, (JDIMENSION) 0); + if (cinfo->output_scanline == last_scanline) + return FALSE; /* No progress made, must suspend */ + } + /* Finish up dummy pass, and set up for another one */ + (*cinfo->master->finish_output_pass) (cinfo); + (*cinfo->master->prepare_for_output_pass) (cinfo); + cinfo->output_scanline = 0; +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif /* QUANT_2PASS_SUPPORTED */ + } + /* Ready for application to drive output pass through + * jpeg_read_scanlines or jpeg_read_raw_data. + */ + cinfo->global_state = cinfo->raw_data_out ? DSTATE_RAW_OK : DSTATE_SCANNING; + return TRUE; +} + + +/* + * Read some scanlines of data from the JPEG decompressor. + * + * The return value will be the number of lines actually read. + * This may be less than the number requested in several cases, + * including bottom of image, data source suspension, and operating + * modes that emit multiple scanlines at a time. + * + * Note: we warn about excess calls to jpeg_read_scanlines() since + * this likely signals an application programmer error. However, + * an oversize buffer (max_lines > scanlines remaining) is not an error. + */ + +GLOBAL(JDIMENSION) +jpeg_read_scanlines (j_decompress_ptr cinfo, JSAMPARRAY scanlines, + JDIMENSION max_lines) +{ + JDIMENSION row_ctr; + + if (cinfo->global_state != DSTATE_SCANNING) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + if (cinfo->output_scanline >= cinfo->output_height) { + WARNMS(cinfo, JWRN_TOO_MUCH_DATA); + return 0; + } + + /* Call progress monitor hook if present */ + if (cinfo->progress != NULL) { + cinfo->progress->pass_counter = (long) cinfo->output_scanline; + cinfo->progress->pass_limit = (long) cinfo->output_height; + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + } + + /* Process some data */ + row_ctr = 0; + (*cinfo->main->process_data) (cinfo, scanlines, &row_ctr, max_lines); + cinfo->output_scanline += row_ctr; + return row_ctr; +} + + +/* + * Alternate entry point to read raw data. + * Processes exactly one iMCU row per call, unless suspended. + */ + +GLOBAL(JDIMENSION) +jpeg_read_raw_data (j_decompress_ptr cinfo, JSAMPIMAGE data, + JDIMENSION max_lines) +{ + JDIMENSION lines_per_iMCU_row; + + if (cinfo->global_state != DSTATE_RAW_OK) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + if (cinfo->output_scanline >= cinfo->output_height) { + WARNMS(cinfo, JWRN_TOO_MUCH_DATA); + return 0; + } + + /* Call progress monitor hook if present */ + if (cinfo->progress != NULL) { + cinfo->progress->pass_counter = (long) cinfo->output_scanline; + cinfo->progress->pass_limit = (long) cinfo->output_height; + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + } + + /* Verify that at least one iMCU row can be returned. */ + lines_per_iMCU_row = cinfo->max_v_samp_factor * cinfo->min_DCT_v_scaled_size; + if (max_lines < lines_per_iMCU_row) + ERREXIT(cinfo, JERR_BUFFER_SIZE); + + /* Decompress directly into user's buffer. */ + if (! (*cinfo->coef->decompress_data) (cinfo, data)) + return 0; /* suspension forced, can do nothing more */ + + /* OK, we processed one iMCU row. */ + cinfo->output_scanline += lines_per_iMCU_row; + return lines_per_iMCU_row; +} + + +/* Additional entry points for buffered-image mode. */ + +#ifdef D_MULTISCAN_FILES_SUPPORTED + +/* + * Initialize for an output pass in buffered-image mode. + */ + +GLOBAL(boolean) +jpeg_start_output (j_decompress_ptr cinfo, int scan_number) +{ + if (cinfo->global_state != DSTATE_BUFIMAGE && + cinfo->global_state != DSTATE_PRESCAN) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + /* Limit scan number to valid range */ + if (scan_number <= 0) + scan_number = 1; + if (cinfo->inputctl->eoi_reached && + scan_number > cinfo->input_scan_number) + scan_number = cinfo->input_scan_number; + cinfo->output_scan_number = scan_number; + /* Perform any dummy output passes, and set up for the real pass */ + return output_pass_setup(cinfo); +} + + +/* + * Finish up after an output pass in buffered-image mode. + * + * Returns FALSE if suspended. The return value need be inspected only if + * a suspending data source is used. + */ + +GLOBAL(boolean) +jpeg_finish_output (j_decompress_ptr cinfo) +{ + if ((cinfo->global_state == DSTATE_SCANNING || + cinfo->global_state == DSTATE_RAW_OK) && cinfo->buffered_image) { + /* Terminate this pass. */ + /* We do not require the whole pass to have been completed. */ + (*cinfo->master->finish_output_pass) (cinfo); + cinfo->global_state = DSTATE_BUFPOST; + } else if (cinfo->global_state != DSTATE_BUFPOST) { + /* BUFPOST = repeat call after a suspension, anything else is error */ + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + } + /* Read markers looking for SOS or EOI */ + while (cinfo->input_scan_number <= cinfo->output_scan_number && + ! cinfo->inputctl->eoi_reached) { + if ((*cinfo->inputctl->consume_input) (cinfo) == JPEG_SUSPENDED) + return FALSE; /* Suspend, come back later */ + } + cinfo->global_state = DSTATE_BUFIMAGE; + return TRUE; +} + +#endif /* D_MULTISCAN_FILES_SUPPORTED */ diff --git a/compat/libjpeg/jdarith.c b/compat/libjpeg/jdarith.c new file mode 100755 index 0000000..5533c07 --- /dev/null +++ b/compat/libjpeg/jdarith.c @@ -0,0 +1,796 @@ +/* + * jdarith.c + * + * Developed 1997-2015 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains portable arithmetic entropy decoding routines for JPEG + * (implementing the ISO/IEC IS 10918-1 and CCITT Recommendation ITU-T T.81). + * + * Both sequential and progressive modes are supported in this single module. + * + * Suspension is not currently supported in this module. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Expanded entropy decoder object for arithmetic decoding. */ + +typedef struct { + struct jpeg_entropy_decoder pub; /* public fields */ + + INT32 c; /* C register, base of coding interval + input bit buffer */ + INT32 a; /* A register, normalized size of coding interval */ + int ct; /* bit shift counter, # of bits left in bit buffer part of C */ + /* init: ct = -16 */ + /* run: ct = 0..7 */ + /* error: ct = -1 */ + int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ + int dc_context[MAX_COMPS_IN_SCAN]; /* context index for DC conditioning */ + + unsigned int restarts_to_go; /* MCUs left in this restart interval */ + + /* Pointers to statistics areas (these workspaces have image lifespan) */ + unsigned char * dc_stats[NUM_ARITH_TBLS]; + unsigned char * ac_stats[NUM_ARITH_TBLS]; + + /* Statistics bin for coding with fixed probability 0.5 */ + unsigned char fixed_bin[4]; +} arith_entropy_decoder; + +typedef arith_entropy_decoder * arith_entropy_ptr; + +/* The following two definitions specify the allocation chunk size + * for the statistics area. + * According to sections F.1.4.4.1.3 and F.1.4.4.2, we need at least + * 49 statistics bins for DC, and 245 statistics bins for AC coding. + * + * We use a compact representation with 1 byte per statistics bin, + * thus the numbers directly represent byte sizes. + * This 1 byte per statistics bin contains the meaning of the MPS + * (more probable symbol) in the highest bit (mask 0x80), and the + * index into the probability estimation state machine table + * in the lower bits (mask 0x7F). + */ + +#define DC_STAT_BINS 64 +#define AC_STAT_BINS 256 + + +LOCAL(int) +get_byte (j_decompress_ptr cinfo) +/* Read next input byte; we do not support suspension in this module. */ +{ + struct jpeg_source_mgr * src = cinfo->src; + + if (src->bytes_in_buffer == 0) + if (! (*src->fill_input_buffer) (cinfo)) + ERREXIT(cinfo, JERR_CANT_SUSPEND); + src->bytes_in_buffer--; + return GETJOCTET(*src->next_input_byte++); +} + + +/* + * The core arithmetic decoding routine (common in JPEG and JBIG). + * This needs to go as fast as possible. + * Machine-dependent optimization facilities + * are not utilized in this portable implementation. + * However, this code should be fairly efficient and + * may be a good base for further optimizations anyway. + * + * Return value is 0 or 1 (binary decision). + * + * Note: I've changed the handling of the code base & bit + * buffer register C compared to other implementations + * based on the standards layout & procedures. + * While it also contains both the actual base of the + * coding interval (16 bits) and the next-bits buffer, + * the cut-point between these two parts is floating + * (instead of fixed) with the bit shift counter CT. + * Thus, we also need only one (variable instead of + * fixed size) shift for the LPS/MPS decision, and + * we can do away with any renormalization update + * of C (except for new data insertion, of course). + * + * I've also introduced a new scheme for accessing + * the probability estimation state machine table, + * derived from Markus Kuhn's JBIG implementation. + */ + +LOCAL(int) +arith_decode (j_decompress_ptr cinfo, unsigned char *st) +{ + register arith_entropy_ptr e = (arith_entropy_ptr) cinfo->entropy; + register unsigned char nl, nm; + register INT32 qe, temp; + register int sv, data; + + /* Renormalization & data input per section D.2.6 */ + while (e->a < 0x8000L) { + if (--e->ct < 0) { + /* Need to fetch next data byte */ + if (cinfo->unread_marker) + data = 0; /* stuff zero data */ + else { + data = get_byte(cinfo); /* read next input byte */ + if (data == 0xFF) { /* zero stuff or marker code */ + do data = get_byte(cinfo); + while (data == 0xFF); /* swallow extra 0xFF bytes */ + if (data == 0) + data = 0xFF; /* discard stuffed zero byte */ + else { + /* Note: Different from the Huffman decoder, hitting + * a marker while processing the compressed data + * segment is legal in arithmetic coding. + * The convention is to supply zero data + * then until decoding is complete. + */ + cinfo->unread_marker = data; + data = 0; + } + } + } + e->c = (e->c << 8) | data; /* insert data into C register */ + if ((e->ct += 8) < 0) /* update bit shift counter */ + /* Need more initial bytes */ + if (++e->ct == 0) + /* Got 2 initial bytes -> re-init A and exit loop */ + e->a = 0x8000L; /* => e->a = 0x10000L after loop exit */ + } + e->a <<= 1; + } + + /* Fetch values from our compact representation of Table D.3(D.2): + * Qe values and probability estimation state machine + */ + sv = *st; + qe = jpeg_aritab[sv & 0x7F]; /* => Qe_Value */ + nl = qe & 0xFF; qe >>= 8; /* Next_Index_LPS + Switch_MPS */ + nm = qe & 0xFF; qe >>= 8; /* Next_Index_MPS */ + + /* Decode & estimation procedures per sections D.2.4 & D.2.5 */ + temp = e->a - qe; + e->a = temp; + temp <<= e->ct; + if (e->c >= temp) { + e->c -= temp; + /* Conditional LPS (less probable symbol) exchange */ + if (e->a < qe) { + e->a = qe; + *st = (sv & 0x80) ^ nm; /* Estimate_after_MPS */ + } else { + e->a = qe; + *st = (sv & 0x80) ^ nl; /* Estimate_after_LPS */ + sv ^= 0x80; /* Exchange LPS/MPS */ + } + } else if (e->a < 0x8000L) { + /* Conditional MPS (more probable symbol) exchange */ + if (e->a < qe) { + *st = (sv & 0x80) ^ nl; /* Estimate_after_LPS */ + sv ^= 0x80; /* Exchange LPS/MPS */ + } else { + *st = (sv & 0x80) ^ nm; /* Estimate_after_MPS */ + } + } + + return sv >> 7; +} + + +/* + * Check for a restart marker & resynchronize decoder. + */ + +LOCAL(void) +process_restart (j_decompress_ptr cinfo) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + int ci; + jpeg_component_info * compptr; + + /* Advance past the RSTn marker */ + if (! (*cinfo->marker->read_restart_marker) (cinfo)) + ERREXIT(cinfo, JERR_CANT_SUSPEND); + + /* Re-initialize statistics areas */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + if (! cinfo->progressive_mode || (cinfo->Ss == 0 && cinfo->Ah == 0)) { + MEMZERO(entropy->dc_stats[compptr->dc_tbl_no], DC_STAT_BINS); + /* Reset DC predictions to 0 */ + entropy->last_dc_val[ci] = 0; + entropy->dc_context[ci] = 0; + } + if ((! cinfo->progressive_mode && cinfo->lim_Se) || + (cinfo->progressive_mode && cinfo->Ss)) { + MEMZERO(entropy->ac_stats[compptr->ac_tbl_no], AC_STAT_BINS); + } + } + + /* Reset arithmetic decoding variables */ + entropy->c = 0; + entropy->a = 0; + entropy->ct = -16; /* force reading 2 initial bytes to fill C */ + + /* Reset restart counter */ + entropy->restarts_to_go = cinfo->restart_interval; +} + + +/* + * Arithmetic MCU decoding. + * Each of these routines decodes and returns one MCU's worth of + * arithmetic-compressed coefficients. + * The coefficients are reordered from zigzag order into natural array order, + * but are not dequantized. + * + * The i'th block of the MCU is stored into the block pointed to by + * MCU_data[i]. WE ASSUME THIS AREA IS INITIALLY ZEROED BY THE CALLER. + */ + +/* + * MCU decoding for DC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +decode_mcu_DC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + JBLOCKROW block; + unsigned char *st; + int blkn, ci, tbl, sign; + int v, m; + + /* Process restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + process_restart(cinfo); + entropy->restarts_to_go--; + } + + if (entropy->ct == -1) return TRUE; /* if error do nothing */ + + /* Outer loop handles each block in the MCU */ + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + block = MCU_data[blkn]; + ci = cinfo->MCU_membership[blkn]; + tbl = cinfo->cur_comp_info[ci]->dc_tbl_no; + + /* Sections F.2.4.1 & F.1.4.4.1: Decoding of DC coefficients */ + + /* Table F.4: Point to statistics bin S0 for DC coefficient coding */ + st = entropy->dc_stats[tbl] + entropy->dc_context[ci]; + + /* Figure F.19: Decode_DC_DIFF */ + if (arith_decode(cinfo, st) == 0) + entropy->dc_context[ci] = 0; + else { + /* Figure F.21: Decoding nonzero value v */ + /* Figure F.22: Decoding the sign of v */ + sign = arith_decode(cinfo, st + 1); + st += 2; st += sign; + /* Figure F.23: Decoding the magnitude category of v */ + if ((m = arith_decode(cinfo, st)) != 0) { + st = entropy->dc_stats[tbl] + 20; /* Table F.4: X1 = 20 */ + while (arith_decode(cinfo, st)) { + if ((m <<= 1) == 0x8000) { + WARNMS(cinfo, JWRN_ARITH_BAD_CODE); + entropy->ct = -1; /* magnitude overflow */ + return TRUE; + } + st += 1; + } + } + /* Section F.1.4.4.1.2: Establish dc_context conditioning category */ + if (m < (int) ((1L << cinfo->arith_dc_L[tbl]) >> 1)) + entropy->dc_context[ci] = 0; /* zero diff category */ + else if (m > (int) ((1L << cinfo->arith_dc_U[tbl]) >> 1)) + entropy->dc_context[ci] = 12 + (sign * 4); /* large diff category */ + else + entropy->dc_context[ci] = 4 + (sign * 4); /* small diff category */ + v = m; + /* Figure F.24: Decoding the magnitude bit pattern of v */ + st += 14; + while (m >>= 1) + if (arith_decode(cinfo, st)) v |= m; + v += 1; if (sign) v = -v; + entropy->last_dc_val[ci] += v; + } + + /* Scale and output the DC coefficient (assumes jpeg_natural_order[0]=0) */ + (*block)[0] = (JCOEF) (entropy->last_dc_val[ci] << cinfo->Al); + } + + return TRUE; +} + + +/* + * MCU decoding for AC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +decode_mcu_AC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + JBLOCKROW block; + unsigned char *st; + int tbl, sign, k; + int v, m; + const int * natural_order; + + /* Process restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + process_restart(cinfo); + entropy->restarts_to_go--; + } + + if (entropy->ct == -1) return TRUE; /* if error do nothing */ + + natural_order = cinfo->natural_order; + + /* There is always only one block per MCU */ + block = MCU_data[0]; + tbl = cinfo->cur_comp_info[0]->ac_tbl_no; + + /* Sections F.2.4.2 & F.1.4.4.2: Decoding of AC coefficients */ + + /* Figure F.20: Decode_AC_coefficients */ + k = cinfo->Ss - 1; + do { + st = entropy->ac_stats[tbl] + 3 * k; + if (arith_decode(cinfo, st)) break; /* EOB flag */ + for (;;) { + k++; + if (arith_decode(cinfo, st + 1)) break; + st += 3; + if (k >= cinfo->Se) { + WARNMS(cinfo, JWRN_ARITH_BAD_CODE); + entropy->ct = -1; /* spectral overflow */ + return TRUE; + } + } + /* Figure F.21: Decoding nonzero value v */ + /* Figure F.22: Decoding the sign of v */ + sign = arith_decode(cinfo, entropy->fixed_bin); + st += 2; + /* Figure F.23: Decoding the magnitude category of v */ + if ((m = arith_decode(cinfo, st)) != 0) { + if (arith_decode(cinfo, st)) { + m <<= 1; + st = entropy->ac_stats[tbl] + + (k <= cinfo->arith_ac_K[tbl] ? 189 : 217); + while (arith_decode(cinfo, st)) { + if ((m <<= 1) == 0x8000) { + WARNMS(cinfo, JWRN_ARITH_BAD_CODE); + entropy->ct = -1; /* magnitude overflow */ + return TRUE; + } + st += 1; + } + } + } + v = m; + /* Figure F.24: Decoding the magnitude bit pattern of v */ + st += 14; + while (m >>= 1) + if (arith_decode(cinfo, st)) v |= m; + v += 1; if (sign) v = -v; + /* Scale and output coefficient in natural (dezigzagged) order */ + (*block)[natural_order[k]] = (JCOEF) (v << cinfo->Al); + } while (k < cinfo->Se); + + return TRUE; +} + + +/* + * MCU decoding for DC successive approximation refinement scan. + * Note: we assume such scans can be multi-component, + * although the spec is not very clear on the point. + */ + +METHODDEF(boolean) +decode_mcu_DC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + unsigned char *st; + int p1, blkn; + + /* Process restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + process_restart(cinfo); + entropy->restarts_to_go--; + } + + st = entropy->fixed_bin; /* use fixed probability estimation */ + p1 = 1 << cinfo->Al; /* 1 in the bit position being coded */ + + /* Outer loop handles each block in the MCU */ + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + /* Encoded data is simply the next bit of the two's-complement DC value */ + if (arith_decode(cinfo, st)) + MCU_data[blkn][0][0] |= p1; + } + + return TRUE; +} + + +/* + * MCU decoding for AC successive approximation refinement scan. + */ + +METHODDEF(boolean) +decode_mcu_AC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + JBLOCKROW block; + JCOEFPTR thiscoef; + unsigned char *st; + int tbl, k, kex; + int p1, m1; + const int * natural_order; + + /* Process restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + process_restart(cinfo); + entropy->restarts_to_go--; + } + + if (entropy->ct == -1) return TRUE; /* if error do nothing */ + + natural_order = cinfo->natural_order; + + /* There is always only one block per MCU */ + block = MCU_data[0]; + tbl = cinfo->cur_comp_info[0]->ac_tbl_no; + + p1 = 1 << cinfo->Al; /* 1 in the bit position being coded */ + m1 = (-1) << cinfo->Al; /* -1 in the bit position being coded */ + + /* Establish EOBx (previous stage end-of-block) index */ + kex = cinfo->Se; + do { + if ((*block)[natural_order[kex]]) break; + } while (--kex); + + k = cinfo->Ss - 1; + do { + st = entropy->ac_stats[tbl] + 3 * k; + if (k >= kex) + if (arith_decode(cinfo, st)) break; /* EOB flag */ + for (;;) { + thiscoef = *block + natural_order[++k]; + if (*thiscoef) { /* previously nonzero coef */ + if (arith_decode(cinfo, st + 2)) { + if (*thiscoef < 0) + *thiscoef += m1; + else + *thiscoef += p1; + } + break; + } + if (arith_decode(cinfo, st + 1)) { /* newly nonzero coef */ + if (arith_decode(cinfo, entropy->fixed_bin)) + *thiscoef = m1; + else + *thiscoef = p1; + break; + } + st += 3; + if (k >= cinfo->Se) { + WARNMS(cinfo, JWRN_ARITH_BAD_CODE); + entropy->ct = -1; /* spectral overflow */ + return TRUE; + } + } + } while (k < cinfo->Se); + + return TRUE; +} + + +/* + * Decode one MCU's worth of arithmetic-compressed coefficients. + */ + +METHODDEF(boolean) +decode_mcu (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + jpeg_component_info * compptr; + JBLOCKROW block; + unsigned char *st; + int blkn, ci, tbl, sign, k; + int v, m; + const int * natural_order; + + /* Process restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + process_restart(cinfo); + entropy->restarts_to_go--; + } + + if (entropy->ct == -1) return TRUE; /* if error do nothing */ + + natural_order = cinfo->natural_order; + + /* Outer loop handles each block in the MCU */ + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + block = MCU_data[blkn]; + ci = cinfo->MCU_membership[blkn]; + compptr = cinfo->cur_comp_info[ci]; + + /* Sections F.2.4.1 & F.1.4.4.1: Decoding of DC coefficients */ + + tbl = compptr->dc_tbl_no; + + /* Table F.4: Point to statistics bin S0 for DC coefficient coding */ + st = entropy->dc_stats[tbl] + entropy->dc_context[ci]; + + /* Figure F.19: Decode_DC_DIFF */ + if (arith_decode(cinfo, st) == 0) + entropy->dc_context[ci] = 0; + else { + /* Figure F.21: Decoding nonzero value v */ + /* Figure F.22: Decoding the sign of v */ + sign = arith_decode(cinfo, st + 1); + st += 2; st += sign; + /* Figure F.23: Decoding the magnitude category of v */ + if ((m = arith_decode(cinfo, st)) != 0) { + st = entropy->dc_stats[tbl] + 20; /* Table F.4: X1 = 20 */ + while (arith_decode(cinfo, st)) { + if ((m <<= 1) == 0x8000) { + WARNMS(cinfo, JWRN_ARITH_BAD_CODE); + entropy->ct = -1; /* magnitude overflow */ + return TRUE; + } + st += 1; + } + } + /* Section F.1.4.4.1.2: Establish dc_context conditioning category */ + if (m < (int) ((1L << cinfo->arith_dc_L[tbl]) >> 1)) + entropy->dc_context[ci] = 0; /* zero diff category */ + else if (m > (int) ((1L << cinfo->arith_dc_U[tbl]) >> 1)) + entropy->dc_context[ci] = 12 + (sign * 4); /* large diff category */ + else + entropy->dc_context[ci] = 4 + (sign * 4); /* small diff category */ + v = m; + /* Figure F.24: Decoding the magnitude bit pattern of v */ + st += 14; + while (m >>= 1) + if (arith_decode(cinfo, st)) v |= m; + v += 1; if (sign) v = -v; + entropy->last_dc_val[ci] += v; + } + + (*block)[0] = (JCOEF) entropy->last_dc_val[ci]; + + /* Sections F.2.4.2 & F.1.4.4.2: Decoding of AC coefficients */ + + if (cinfo->lim_Se == 0) continue; + tbl = compptr->ac_tbl_no; + k = 0; + + /* Figure F.20: Decode_AC_coefficients */ + do { + st = entropy->ac_stats[tbl] + 3 * k; + if (arith_decode(cinfo, st)) break; /* EOB flag */ + for (;;) { + k++; + if (arith_decode(cinfo, st + 1)) break; + st += 3; + if (k >= cinfo->lim_Se) { + WARNMS(cinfo, JWRN_ARITH_BAD_CODE); + entropy->ct = -1; /* spectral overflow */ + return TRUE; + } + } + /* Figure F.21: Decoding nonzero value v */ + /* Figure F.22: Decoding the sign of v */ + sign = arith_decode(cinfo, entropy->fixed_bin); + st += 2; + /* Figure F.23: Decoding the magnitude category of v */ + if ((m = arith_decode(cinfo, st)) != 0) { + if (arith_decode(cinfo, st)) { + m <<= 1; + st = entropy->ac_stats[tbl] + + (k <= cinfo->arith_ac_K[tbl] ? 189 : 217); + while (arith_decode(cinfo, st)) { + if ((m <<= 1) == 0x8000) { + WARNMS(cinfo, JWRN_ARITH_BAD_CODE); + entropy->ct = -1; /* magnitude overflow */ + return TRUE; + } + st += 1; + } + } + } + v = m; + /* Figure F.24: Decoding the magnitude bit pattern of v */ + st += 14; + while (m >>= 1) + if (arith_decode(cinfo, st)) v |= m; + v += 1; if (sign) v = -v; + (*block)[natural_order[k]] = (JCOEF) v; + } while (k < cinfo->lim_Se); + } + + return TRUE; +} + + +/* + * Initialize for an arithmetic-compressed scan. + */ + +METHODDEF(void) +start_pass (j_decompress_ptr cinfo) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + int ci, tbl; + jpeg_component_info * compptr; + + if (cinfo->progressive_mode) { + /* Validate progressive scan parameters */ + if (cinfo->Ss == 0) { + if (cinfo->Se != 0) + goto bad; + } else { + /* need not check Ss/Se < 0 since they came from unsigned bytes */ + if (cinfo->Se < cinfo->Ss || cinfo->Se > cinfo->lim_Se) + goto bad; + /* AC scans may have only one component */ + if (cinfo->comps_in_scan != 1) + goto bad; + } + if (cinfo->Ah != 0) { + /* Successive approximation refinement scan: must have Al = Ah-1. */ + if (cinfo->Ah-1 != cinfo->Al) + goto bad; + } + if (cinfo->Al > 13) { /* need not check for < 0 */ + bad: + ERREXIT4(cinfo, JERR_BAD_PROGRESSION, + cinfo->Ss, cinfo->Se, cinfo->Ah, cinfo->Al); + } + /* Update progression status, and verify that scan order is legal. + * Note that inter-scan inconsistencies are treated as warnings + * not fatal errors ... not clear if this is right way to behave. + */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + int coefi, cindex = cinfo->cur_comp_info[ci]->component_index; + int *coef_bit_ptr = & cinfo->coef_bits[cindex][0]; + if (cinfo->Ss && coef_bit_ptr[0] < 0) /* AC without prior DC scan */ + WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, 0); + for (coefi = cinfo->Ss; coefi <= cinfo->Se; coefi++) { + int expected = (coef_bit_ptr[coefi] < 0) ? 0 : coef_bit_ptr[coefi]; + if (cinfo->Ah != expected) + WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, coefi); + coef_bit_ptr[coefi] = cinfo->Al; + } + } + /* Select MCU decoding routine */ + if (cinfo->Ah == 0) { + if (cinfo->Ss == 0) + entropy->pub.decode_mcu = decode_mcu_DC_first; + else + entropy->pub.decode_mcu = decode_mcu_AC_first; + } else { + if (cinfo->Ss == 0) + entropy->pub.decode_mcu = decode_mcu_DC_refine; + else + entropy->pub.decode_mcu = decode_mcu_AC_refine; + } + } else { + /* Check that the scan parameters Ss, Se, Ah/Al are OK for sequential JPEG. + * This ought to be an error condition, but we make it a warning. + */ + if (cinfo->Ss != 0 || cinfo->Ah != 0 || cinfo->Al != 0 || + (cinfo->Se < DCTSIZE2 && cinfo->Se != cinfo->lim_Se)) + WARNMS(cinfo, JWRN_NOT_SEQUENTIAL); + /* Select MCU decoding routine */ + entropy->pub.decode_mcu = decode_mcu; + } + + /* Allocate & initialize requested statistics areas */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + if (! cinfo->progressive_mode || (cinfo->Ss == 0 && cinfo->Ah == 0)) { + tbl = compptr->dc_tbl_no; + if (tbl < 0 || tbl >= NUM_ARITH_TBLS) + ERREXIT1(cinfo, JERR_NO_ARITH_TABLE, tbl); + if (entropy->dc_stats[tbl] == NULL) + entropy->dc_stats[tbl] = (unsigned char *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, DC_STAT_BINS); + MEMZERO(entropy->dc_stats[tbl], DC_STAT_BINS); + /* Initialize DC predictions to 0 */ + entropy->last_dc_val[ci] = 0; + entropy->dc_context[ci] = 0; + } + if ((! cinfo->progressive_mode && cinfo->lim_Se) || + (cinfo->progressive_mode && cinfo->Ss)) { + tbl = compptr->ac_tbl_no; + if (tbl < 0 || tbl >= NUM_ARITH_TBLS) + ERREXIT1(cinfo, JERR_NO_ARITH_TABLE, tbl); + if (entropy->ac_stats[tbl] == NULL) + entropy->ac_stats[tbl] = (unsigned char *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, AC_STAT_BINS); + MEMZERO(entropy->ac_stats[tbl], AC_STAT_BINS); + } + } + + /* Initialize arithmetic decoding variables */ + entropy->c = 0; + entropy->a = 0; + entropy->ct = -16; /* force reading 2 initial bytes to fill C */ + + /* Initialize restart counter */ + entropy->restarts_to_go = cinfo->restart_interval; +} + + +/* + * Finish up at the end of an arithmetic-compressed scan. + */ + +METHODDEF(void) +finish_pass (j_decompress_ptr cinfo) +{ + /* no work necessary here */ +} + + +/* + * Module initialization routine for arithmetic entropy decoding. + */ + +GLOBAL(void) +jinit_arith_decoder (j_decompress_ptr cinfo) +{ + arith_entropy_ptr entropy; + int i; + + entropy = (arith_entropy_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(arith_entropy_decoder)); + cinfo->entropy = &entropy->pub; + entropy->pub.start_pass = start_pass; + entropy->pub.finish_pass = finish_pass; + + /* Mark tables unallocated */ + for (i = 0; i < NUM_ARITH_TBLS; i++) { + entropy->dc_stats[i] = NULL; + entropy->ac_stats[i] = NULL; + } + + /* Initialize index for fixed probability estimation */ + entropy->fixed_bin[0] = 113; + + if (cinfo->progressive_mode) { + /* Create progression status table */ + int *coef_bit_ptr, ci; + cinfo->coef_bits = (int (*)[DCTSIZE2]) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + cinfo->num_components*DCTSIZE2*SIZEOF(int)); + coef_bit_ptr = & cinfo->coef_bits[0][0]; + for (ci = 0; ci < cinfo->num_components; ci++) + for (i = 0; i < DCTSIZE2; i++) + *coef_bit_ptr++ = -1; + } +} diff --git a/compat/libjpeg/jdatadst.c b/compat/libjpeg/jdatadst.c new file mode 100755 index 0000000..677e463 --- /dev/null +++ b/compat/libjpeg/jdatadst.c @@ -0,0 +1,270 @@ +/* + * jdatadst.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2009-2012 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains compression data destination routines for the case of + * emitting JPEG data to memory or to a file (or any stdio stream). + * While these routines are sufficient for most applications, + * some will want to use a different destination manager. + * IMPORTANT: we assume that fwrite() will correctly transcribe an array of + * JOCTETs into 8-bit-wide elements on external storage. If char is wider + * than 8 bits on your machine, you may need to do some tweaking. + */ + +/* this is not a core library module, so it doesn't define JPEG_INTERNALS */ +#include "jinclude.h" +#include "jpeglib.h" +#include "jerror.h" + +#ifndef HAVE_STDLIB_H /* should declare malloc(),free() */ +extern void * malloc JPP((size_t size)); +extern void free JPP((void *ptr)); +#endif + + +/* Expanded data destination object for stdio output */ + +typedef struct { + struct jpeg_destination_mgr pub; /* public fields */ + + FILE * outfile; /* target stream */ + JOCTET * buffer; /* start of buffer */ +} my_destination_mgr; + +typedef my_destination_mgr * my_dest_ptr; + +#define OUTPUT_BUF_SIZE 4096 /* choose an efficiently fwrite'able size */ + + +/* Expanded data destination object for memory output */ + +typedef struct { + struct jpeg_destination_mgr pub; /* public fields */ + + unsigned char ** outbuffer; /* target buffer */ + unsigned long * outsize; + unsigned char * newbuffer; /* newly allocated buffer */ + JOCTET * buffer; /* start of buffer */ + size_t bufsize; +} my_mem_destination_mgr; + +typedef my_mem_destination_mgr * my_mem_dest_ptr; + + +/* + * Initialize destination --- called by jpeg_start_compress + * before any data is actually written. + */ + +METHODDEF(void) +init_destination (j_compress_ptr cinfo) +{ + my_dest_ptr dest = (my_dest_ptr) cinfo->dest; + + /* Allocate the output buffer --- it will be released when done with image */ + dest->buffer = (JOCTET *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + OUTPUT_BUF_SIZE * SIZEOF(JOCTET)); + + dest->pub.next_output_byte = dest->buffer; + dest->pub.free_in_buffer = OUTPUT_BUF_SIZE; +} + +METHODDEF(void) +init_mem_destination (j_compress_ptr cinfo) +{ + /* no work necessary here */ +} + + +/* + * Empty the output buffer --- called whenever buffer fills up. + * + * In typical applications, this should write the entire output buffer + * (ignoring the current state of next_output_byte & free_in_buffer), + * reset the pointer & count to the start of the buffer, and return TRUE + * indicating that the buffer has been dumped. + * + * In applications that need to be able to suspend compression due to output + * overrun, a FALSE return indicates that the buffer cannot be emptied now. + * In this situation, the compressor will return to its caller (possibly with + * an indication that it has not accepted all the supplied scanlines). The + * application should resume compression after it has made more room in the + * output buffer. Note that there are substantial restrictions on the use of + * suspension --- see the documentation. + * + * When suspending, the compressor will back up to a convenient restart point + * (typically the start of the current MCU). next_output_byte & free_in_buffer + * indicate where the restart point will be if the current call returns FALSE. + * Data beyond this point will be regenerated after resumption, so do not + * write it out when emptying the buffer externally. + */ + +METHODDEF(boolean) +empty_output_buffer (j_compress_ptr cinfo) +{ + my_dest_ptr dest = (my_dest_ptr) cinfo->dest; + + if (JFWRITE(dest->outfile, dest->buffer, OUTPUT_BUF_SIZE) != + (size_t) OUTPUT_BUF_SIZE) + ERREXIT(cinfo, JERR_FILE_WRITE); + + dest->pub.next_output_byte = dest->buffer; + dest->pub.free_in_buffer = OUTPUT_BUF_SIZE; + + return TRUE; +} + +METHODDEF(boolean) +empty_mem_output_buffer (j_compress_ptr cinfo) +{ + size_t nextsize; + JOCTET * nextbuffer; + my_mem_dest_ptr dest = (my_mem_dest_ptr) cinfo->dest; + + /* Try to allocate new buffer with double size */ + nextsize = dest->bufsize * 2; + nextbuffer = (JOCTET *) malloc(nextsize); + + if (nextbuffer == NULL) + ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, 10); + + MEMCOPY(nextbuffer, dest->buffer, dest->bufsize); + + if (dest->newbuffer != NULL) + free(dest->newbuffer); + + dest->newbuffer = nextbuffer; + + dest->pub.next_output_byte = nextbuffer + dest->bufsize; + dest->pub.free_in_buffer = dest->bufsize; + + dest->buffer = nextbuffer; + dest->bufsize = nextsize; + + return TRUE; +} + + +/* + * Terminate destination --- called by jpeg_finish_compress + * after all data has been written. Usually needs to flush buffer. + * + * NB: *not* called by jpeg_abort or jpeg_destroy; surrounding + * application must deal with any cleanup that should happen even + * for error exit. + */ + +METHODDEF(void) +term_destination (j_compress_ptr cinfo) +{ + my_dest_ptr dest = (my_dest_ptr) cinfo->dest; + size_t datacount = OUTPUT_BUF_SIZE - dest->pub.free_in_buffer; + + /* Write any data remaining in the buffer */ + if (datacount > 0) { + if (JFWRITE(dest->outfile, dest->buffer, datacount) != datacount) + ERREXIT(cinfo, JERR_FILE_WRITE); + } + fflush(dest->outfile); + /* Make sure we wrote the output file OK */ + if (ferror(dest->outfile)) + ERREXIT(cinfo, JERR_FILE_WRITE); +} + +METHODDEF(void) +term_mem_destination (j_compress_ptr cinfo) +{ + my_mem_dest_ptr dest = (my_mem_dest_ptr) cinfo->dest; + + *dest->outbuffer = dest->buffer; + *dest->outsize = dest->bufsize - dest->pub.free_in_buffer; +} + + +/* + * Prepare for output to a stdio stream. + * The caller must have already opened the stream, and is responsible + * for closing it after finishing compression. + */ + +GLOBAL(void) +jpeg_stdio_dest (j_compress_ptr cinfo, FILE * outfile) +{ + my_dest_ptr dest; + + /* The destination object is made permanent so that multiple JPEG images + * can be written to the same file without re-executing jpeg_stdio_dest. + * This makes it dangerous to use this manager and a different destination + * manager serially with the same JPEG object, because their private object + * sizes may be different. Caveat programmer. + */ + if (cinfo->dest == NULL) { /* first time for this JPEG object? */ + cinfo->dest = (struct jpeg_destination_mgr *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + SIZEOF(my_destination_mgr)); + } + + dest = (my_dest_ptr) cinfo->dest; + dest->pub.init_destination = init_destination; + dest->pub.empty_output_buffer = empty_output_buffer; + dest->pub.term_destination = term_destination; + dest->outfile = outfile; +} + + +/* + * Prepare for output to a memory buffer. + * The caller may supply an own initial buffer with appropriate size. + * Otherwise, or when the actual data output exceeds the given size, + * the library adapts the buffer size as necessary. + * The standard library functions malloc/free are used for allocating + * larger memory, so the buffer is available to the application after + * finishing compression, and then the application is responsible for + * freeing the requested memory. + * Note: An initial buffer supplied by the caller is expected to be + * managed by the application. The library does not free such buffer + * when allocating a larger buffer. + */ + +GLOBAL(void) +jpeg_mem_dest (j_compress_ptr cinfo, + unsigned char ** outbuffer, unsigned long * outsize) +{ + my_mem_dest_ptr dest; + + if (outbuffer == NULL || outsize == NULL) /* sanity check */ + ERREXIT(cinfo, JERR_BUFFER_SIZE); + + /* The destination object is made permanent so that multiple JPEG images + * can be written to the same buffer without re-executing jpeg_mem_dest. + */ + if (cinfo->dest == NULL) { /* first time for this JPEG object? */ + cinfo->dest = (struct jpeg_destination_mgr *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + SIZEOF(my_mem_destination_mgr)); + } + + dest = (my_mem_dest_ptr) cinfo->dest; + dest->pub.init_destination = init_mem_destination; + dest->pub.empty_output_buffer = empty_mem_output_buffer; + dest->pub.term_destination = term_mem_destination; + dest->outbuffer = outbuffer; + dest->outsize = outsize; + dest->newbuffer = NULL; + + if (*outbuffer == NULL || *outsize == 0) { + /* Allocate initial buffer */ + dest->newbuffer = *outbuffer = (unsigned char *) malloc(OUTPUT_BUF_SIZE); + if (dest->newbuffer == NULL) + ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, 10); + *outsize = OUTPUT_BUF_SIZE; + } + + dest->pub.next_output_byte = dest->buffer = *outbuffer; + dest->pub.free_in_buffer = dest->bufsize = *outsize; +} diff --git a/compat/libjpeg/jdatasrc.c b/compat/libjpeg/jdatasrc.c new file mode 100755 index 0000000..c44d8d0 --- /dev/null +++ b/compat/libjpeg/jdatasrc.c @@ -0,0 +1,275 @@ +/* + * jdatasrc.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2009-2015 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains decompression data source routines for the case of + * reading JPEG data from memory or from a file (or any stdio stream). + * While these routines are sufficient for most applications, + * some will want to use a different source manager. + * IMPORTANT: we assume that fread() will correctly transcribe an array of + * JOCTETs from 8-bit-wide elements on external storage. If char is wider + * than 8 bits on your machine, you may need to do some tweaking. + */ + +/* this is not a core library module, so it doesn't define JPEG_INTERNALS */ +#include "jinclude.h" +#include "jpeglib.h" +#include "jerror.h" + + +/* Expanded data source object for stdio input */ + +typedef struct { + struct jpeg_source_mgr pub; /* public fields */ + + FILE * infile; /* source stream */ + JOCTET * buffer; /* start of buffer */ + boolean start_of_file; /* have we gotten any data yet? */ +} my_source_mgr; + +typedef my_source_mgr * my_src_ptr; + +#define INPUT_BUF_SIZE 4096 /* choose an efficiently fread'able size */ + + +/* + * Initialize source --- called by jpeg_read_header + * before any data is actually read. + */ + +METHODDEF(void) +init_source (j_decompress_ptr cinfo) +{ + my_src_ptr src = (my_src_ptr) cinfo->src; + + /* We reset the empty-input-file flag for each image, + * but we don't clear the input buffer. + * This is correct behavior for reading a series of images from one source. + */ + src->start_of_file = TRUE; +} + +METHODDEF(void) +init_mem_source (j_decompress_ptr cinfo) +{ + /* no work necessary here */ +} + + +/* + * Fill the input buffer --- called whenever buffer is emptied. + * + * In typical applications, this should read fresh data into the buffer + * (ignoring the current state of next_input_byte & bytes_in_buffer), + * reset the pointer & count to the start of the buffer, and return TRUE + * indicating that the buffer has been reloaded. It is not necessary to + * fill the buffer entirely, only to obtain at least one more byte. + * + * There is no such thing as an EOF return. If the end of the file has been + * reached, the routine has a choice of ERREXIT() or inserting fake data into + * the buffer. In most cases, generating a warning message and inserting a + * fake EOI marker is the best course of action --- this will allow the + * decompressor to output however much of the image is there. However, + * the resulting error message is misleading if the real problem is an empty + * input file, so we handle that case specially. + * + * In applications that need to be able to suspend compression due to input + * not being available yet, a FALSE return indicates that no more data can be + * obtained right now, but more may be forthcoming later. In this situation, + * the decompressor will return to its caller (with an indication of the + * number of scanlines it has read, if any). The application should resume + * decompression after it has loaded more data into the input buffer. Note + * that there are substantial restrictions on the use of suspension --- see + * the documentation. + * + * When suspending, the decompressor will back up to a convenient restart point + * (typically the start of the current MCU). next_input_byte & bytes_in_buffer + * indicate where the restart point will be if the current call returns FALSE. + * Data beyond this point must be rescanned after resumption, so move it to + * the front of the buffer rather than discarding it. + */ + +METHODDEF(boolean) +fill_input_buffer (j_decompress_ptr cinfo) +{ + my_src_ptr src = (my_src_ptr) cinfo->src; + size_t nbytes; + + nbytes = JFREAD(src->infile, src->buffer, INPUT_BUF_SIZE); + + if (nbytes <= 0) { + if (src->start_of_file) /* Treat empty input file as fatal error */ + ERREXIT(cinfo, JERR_INPUT_EMPTY); + WARNMS(cinfo, JWRN_JPEG_EOF); + /* Insert a fake EOI marker */ + src->buffer[0] = (JOCTET) 0xFF; + src->buffer[1] = (JOCTET) JPEG_EOI; + nbytes = 2; + } + + src->pub.next_input_byte = src->buffer; + src->pub.bytes_in_buffer = nbytes; + src->start_of_file = FALSE; + + return TRUE; +} + +METHODDEF(boolean) +fill_mem_input_buffer (j_decompress_ptr cinfo) +{ + static const JOCTET mybuffer[4] = { + (JOCTET) 0xFF, (JOCTET) JPEG_EOI, 0, 0 + }; + + /* The whole JPEG data is expected to reside in the supplied memory + * buffer, so any request for more data beyond the given buffer size + * is treated as an error. + */ + WARNMS(cinfo, JWRN_JPEG_EOF); + + /* Insert a fake EOI marker */ + + cinfo->src->next_input_byte = mybuffer; + cinfo->src->bytes_in_buffer = 2; + + return TRUE; +} + + +/* + * Skip data --- used to skip over a potentially large amount of + * uninteresting data (such as an APPn marker). + * + * Writers of suspendable-input applications must note that skip_input_data + * is not granted the right to give a suspension return. If the skip extends + * beyond the data currently in the buffer, the buffer can be marked empty so + * that the next read will cause a fill_input_buffer call that can suspend. + * Arranging for additional bytes to be discarded before reloading the input + * buffer is the application writer's problem. + */ + +METHODDEF(void) +skip_input_data (j_decompress_ptr cinfo, long num_bytes) +{ + struct jpeg_source_mgr * src = cinfo->src; + + /* Just a dumb implementation for now. Could use fseek() except + * it doesn't work on pipes. Not clear that being smart is worth + * any trouble anyway --- large skips are infrequent. + */ + if (num_bytes > 0) { + while (num_bytes > (long) src->bytes_in_buffer) { + num_bytes -= (long) src->bytes_in_buffer; + (void) (*src->fill_input_buffer) (cinfo); + /* note we assume that fill_input_buffer will never return FALSE, + * so suspension need not be handled. + */ + } + src->next_input_byte += (size_t) num_bytes; + src->bytes_in_buffer -= (size_t) num_bytes; + } +} + + +/* + * An additional method that can be provided by data source modules is the + * resync_to_restart method for error recovery in the presence of RST markers. + * For the moment, this source module just uses the default resync method + * provided by the JPEG library. That method assumes that no backtracking + * is possible. + */ + + +/* + * Terminate source --- called by jpeg_finish_decompress + * after all data has been read. Often a no-op. + * + * NB: *not* called by jpeg_abort or jpeg_destroy; surrounding + * application must deal with any cleanup that should happen even + * for error exit. + */ + +METHODDEF(void) +term_source (j_decompress_ptr cinfo) +{ + /* no work necessary here */ +} + + +/* + * Prepare for input from a stdio stream. + * The caller must have already opened the stream, and is responsible + * for closing it after finishing decompression. + */ + +GLOBAL(void) +jpeg_stdio_src (j_decompress_ptr cinfo, FILE * infile) +{ + my_src_ptr src; + + /* The source object and input buffer are made permanent so that a series + * of JPEG images can be read from the same file by calling jpeg_stdio_src + * only before the first one. (If we discarded the buffer at the end of + * one image, we'd likely lose the start of the next one.) + * This makes it unsafe to use this manager and a different source + * manager serially with the same JPEG object. Caveat programmer. + */ + if (cinfo->src == NULL) { /* first time for this JPEG object? */ + cinfo->src = (struct jpeg_source_mgr *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + SIZEOF(my_source_mgr)); + src = (my_src_ptr) cinfo->src; + src->buffer = (JOCTET *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + INPUT_BUF_SIZE * SIZEOF(JOCTET)); + } + + src = (my_src_ptr) cinfo->src; + src->pub.init_source = init_source; + src->pub.fill_input_buffer = fill_input_buffer; + src->pub.skip_input_data = skip_input_data; + src->pub.resync_to_restart = jpeg_resync_to_restart; /* use default method */ + src->pub.term_source = term_source; + src->infile = infile; + src->pub.bytes_in_buffer = 0; /* forces fill_input_buffer on first read */ + src->pub.next_input_byte = NULL; /* until buffer loaded */ +} + + +/* + * Prepare for input from a supplied memory buffer. + * The buffer must contain the whole JPEG data. + */ + +GLOBAL(void) +jpeg_mem_src (j_decompress_ptr cinfo, + const unsigned char * inbuffer, unsigned long insize) +{ + struct jpeg_source_mgr * src; + + if (inbuffer == NULL || insize == 0) /* Treat empty input as fatal error */ + ERREXIT(cinfo, JERR_INPUT_EMPTY); + + /* The source object is made permanent so that a series of JPEG images + * can be read from the same buffer by calling jpeg_mem_src only before + * the first one. + */ + if (cinfo->src == NULL) { /* first time for this JPEG object? */ + cinfo->src = (struct jpeg_source_mgr *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + SIZEOF(struct jpeg_source_mgr)); + } + + src = cinfo->src; + src->init_source = init_mem_source; + src->fill_input_buffer = fill_mem_input_buffer; + src->skip_input_data = skip_input_data; + src->resync_to_restart = jpeg_resync_to_restart; /* use default method */ + src->term_source = term_source; + src->bytes_in_buffer = (size_t) insize; + src->next_input_byte = (const JOCTET *) inbuffer; +} diff --git a/compat/libjpeg/jdcoefct.c b/compat/libjpeg/jdcoefct.c new file mode 100755 index 0000000..75ee51f --- /dev/null +++ b/compat/libjpeg/jdcoefct.c @@ -0,0 +1,741 @@ +/* + * jdcoefct.c + * + * Copyright (C) 1994-1997, Thomas G. Lane. + * Modified 2002-2011 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the coefficient buffer controller for decompression. + * This controller is the top level of the JPEG decompressor proper. + * The coefficient buffer lies between entropy decoding and inverse-DCT steps. + * + * In buffered-image mode, this controller is the interface between + * input-oriented processing and output-oriented processing. + * Also, the input side (only) is used when reading a file for transcoding. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + +/* Block smoothing is only applicable for progressive JPEG, so: */ +#ifndef D_PROGRESSIVE_SUPPORTED +#undef BLOCK_SMOOTHING_SUPPORTED +#endif + +/* Private buffer controller object */ + +typedef struct { + struct jpeg_d_coef_controller pub; /* public fields */ + + /* These variables keep track of the current location of the input side. */ + /* cinfo->input_iMCU_row is also used for this. */ + JDIMENSION MCU_ctr; /* counts MCUs processed in current row */ + int MCU_vert_offset; /* counts MCU rows within iMCU row */ + int MCU_rows_per_iMCU_row; /* number of such rows needed */ + + /* The output side's location is represented by cinfo->output_iMCU_row. */ + + /* In single-pass modes, it's sufficient to buffer just one MCU. + * We allocate a workspace of D_MAX_BLOCKS_IN_MCU coefficient blocks, + * and let the entropy decoder write into that workspace each time. + * (On 80x86, the workspace is FAR even though it's not really very big; + * this is to keep the module interfaces unchanged when a large coefficient + * buffer is necessary.) + * In multi-pass modes, this array points to the current MCU's blocks + * within the virtual arrays; it is used only by the input side. + */ + JBLOCKROW MCU_buffer[D_MAX_BLOCKS_IN_MCU]; + +#ifdef D_MULTISCAN_FILES_SUPPORTED + /* In multi-pass modes, we need a virtual block array for each component. */ + jvirt_barray_ptr whole_image[MAX_COMPONENTS]; +#endif + +#ifdef BLOCK_SMOOTHING_SUPPORTED + /* When doing block smoothing, we latch coefficient Al values here */ + int * coef_bits_latch; +#define SAVED_COEFS 6 /* we save coef_bits[0..5] */ +#endif +} my_coef_controller; + +typedef my_coef_controller * my_coef_ptr; + +/* Forward declarations */ +METHODDEF(int) decompress_onepass + JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf)); +#ifdef D_MULTISCAN_FILES_SUPPORTED +METHODDEF(int) decompress_data + JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf)); +#endif +#ifdef BLOCK_SMOOTHING_SUPPORTED +LOCAL(boolean) smoothing_ok JPP((j_decompress_ptr cinfo)); +METHODDEF(int) decompress_smooth_data + JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf)); +#endif + + +LOCAL(void) +start_iMCU_row (j_decompress_ptr cinfo) +/* Reset within-iMCU-row counters for a new row (input side) */ +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + + /* In an interleaved scan, an MCU row is the same as an iMCU row. + * In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows. + * But at the bottom of the image, process only what's left. + */ + if (cinfo->comps_in_scan > 1) { + coef->MCU_rows_per_iMCU_row = 1; + } else { + if (cinfo->input_iMCU_row < (cinfo->total_iMCU_rows-1)) + coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor; + else + coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height; + } + + coef->MCU_ctr = 0; + coef->MCU_vert_offset = 0; +} + + +/* + * Initialize for an input processing pass. + */ + +METHODDEF(void) +start_input_pass (j_decompress_ptr cinfo) +{ + cinfo->input_iMCU_row = 0; + start_iMCU_row(cinfo); +} + + +/* + * Initialize for an output processing pass. + */ + +METHODDEF(void) +start_output_pass (j_decompress_ptr cinfo) +{ +#ifdef BLOCK_SMOOTHING_SUPPORTED + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + + /* If multipass, check to see whether to use block smoothing on this pass */ + if (coef->pub.coef_arrays != NULL) { + if (cinfo->do_block_smoothing && smoothing_ok(cinfo)) + coef->pub.decompress_data = decompress_smooth_data; + else + coef->pub.decompress_data = decompress_data; + } +#endif + cinfo->output_iMCU_row = 0; +} + + +/* + * Decompress and return some data in the single-pass case. + * Always attempts to emit one fully interleaved MCU row ("iMCU" row). + * Input and output must run in lockstep since we have only a one-MCU buffer. + * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED. + * + * NB: output_buf contains a plane for each component in image, + * which we index according to the component's SOF position. + */ + +METHODDEF(int) +decompress_onepass (j_decompress_ptr cinfo, JSAMPIMAGE output_buf) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + JDIMENSION MCU_col_num; /* index of current MCU within row */ + JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1; + JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; + int blkn, ci, xindex, yindex, yoffset, useful_width; + JSAMPARRAY output_ptr; + JDIMENSION start_col, output_col; + jpeg_component_info *compptr; + inverse_DCT_method_ptr inverse_DCT; + + /* Loop to process as much as one whole iMCU row */ + for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; + yoffset++) { + for (MCU_col_num = coef->MCU_ctr; MCU_col_num <= last_MCU_col; + MCU_col_num++) { + /* Try to fetch an MCU. Entropy decoder expects buffer to be zeroed. */ + if (cinfo->lim_Se) /* can bypass in DC only case */ + FMEMZERO((void FAR *) coef->MCU_buffer[0], + (size_t) (cinfo->blocks_in_MCU * SIZEOF(JBLOCK))); + if (! (*cinfo->entropy->decode_mcu) (cinfo, coef->MCU_buffer)) { + /* Suspension forced; update state counters and exit */ + coef->MCU_vert_offset = yoffset; + coef->MCU_ctr = MCU_col_num; + return JPEG_SUSPENDED; + } + /* Determine where data should go in output_buf and do the IDCT thing. + * We skip dummy blocks at the right and bottom edges (but blkn gets + * incremented past them!). Note the inner loop relies on having + * allocated the MCU_buffer[] blocks sequentially. + */ + blkn = 0; /* index of current DCT block within MCU */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* Don't bother to IDCT an uninteresting component. */ + if (! compptr->component_needed) { + blkn += compptr->MCU_blocks; + continue; + } + inverse_DCT = cinfo->idct->inverse_DCT[compptr->component_index]; + useful_width = (MCU_col_num < last_MCU_col) ? compptr->MCU_width + : compptr->last_col_width; + output_ptr = output_buf[compptr->component_index] + + yoffset * compptr->DCT_v_scaled_size; + start_col = MCU_col_num * compptr->MCU_sample_width; + for (yindex = 0; yindex < compptr->MCU_height; yindex++) { + if (cinfo->input_iMCU_row < last_iMCU_row || + yoffset+yindex < compptr->last_row_height) { + output_col = start_col; + for (xindex = 0; xindex < useful_width; xindex++) { + (*inverse_DCT) (cinfo, compptr, + (JCOEFPTR) coef->MCU_buffer[blkn+xindex], + output_ptr, output_col); + output_col += compptr->DCT_h_scaled_size; + } + } + blkn += compptr->MCU_width; + output_ptr += compptr->DCT_v_scaled_size; + } + } + } + /* Completed an MCU row, but perhaps not an iMCU row */ + coef->MCU_ctr = 0; + } + /* Completed the iMCU row, advance counters for next one */ + cinfo->output_iMCU_row++; + if (++(cinfo->input_iMCU_row) < cinfo->total_iMCU_rows) { + start_iMCU_row(cinfo); + return JPEG_ROW_COMPLETED; + } + /* Completed the scan */ + (*cinfo->inputctl->finish_input_pass) (cinfo); + return JPEG_SCAN_COMPLETED; +} + + +/* + * Dummy consume-input routine for single-pass operation. + */ + +METHODDEF(int) +dummy_consume_data (j_decompress_ptr cinfo) +{ + return JPEG_SUSPENDED; /* Always indicate nothing was done */ +} + + +#ifdef D_MULTISCAN_FILES_SUPPORTED + +/* + * Consume input data and store it in the full-image coefficient buffer. + * We read as much as one fully interleaved MCU row ("iMCU" row) per call, + * ie, v_samp_factor block rows for each component in the scan. + * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED. + */ + +METHODDEF(int) +consume_data (j_decompress_ptr cinfo) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + JDIMENSION MCU_col_num; /* index of current MCU within row */ + int blkn, ci, xindex, yindex, yoffset; + JDIMENSION start_col; + JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN]; + JBLOCKROW buffer_ptr; + jpeg_component_info *compptr; + + /* Align the virtual buffers for the components used in this scan. */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + buffer[ci] = (*cinfo->mem->access_virt_barray) + ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index], + cinfo->input_iMCU_row * compptr->v_samp_factor, + (JDIMENSION) compptr->v_samp_factor, TRUE); + /* Note: entropy decoder expects buffer to be zeroed, + * but this is handled automatically by the memory manager + * because we requested a pre-zeroed array. + */ + } + + /* Loop to process one whole iMCU row */ + for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; + yoffset++) { + for (MCU_col_num = coef->MCU_ctr; MCU_col_num < cinfo->MCUs_per_row; + MCU_col_num++) { + /* Construct list of pointers to DCT blocks belonging to this MCU */ + blkn = 0; /* index of current DCT block within MCU */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + start_col = MCU_col_num * compptr->MCU_width; + for (yindex = 0; yindex < compptr->MCU_height; yindex++) { + buffer_ptr = buffer[ci][yindex+yoffset] + start_col; + for (xindex = 0; xindex < compptr->MCU_width; xindex++) { + coef->MCU_buffer[blkn++] = buffer_ptr++; + } + } + } + /* Try to fetch the MCU. */ + if (! (*cinfo->entropy->decode_mcu) (cinfo, coef->MCU_buffer)) { + /* Suspension forced; update state counters and exit */ + coef->MCU_vert_offset = yoffset; + coef->MCU_ctr = MCU_col_num; + return JPEG_SUSPENDED; + } + } + /* Completed an MCU row, but perhaps not an iMCU row */ + coef->MCU_ctr = 0; + } + /* Completed the iMCU row, advance counters for next one */ + if (++(cinfo->input_iMCU_row) < cinfo->total_iMCU_rows) { + start_iMCU_row(cinfo); + return JPEG_ROW_COMPLETED; + } + /* Completed the scan */ + (*cinfo->inputctl->finish_input_pass) (cinfo); + return JPEG_SCAN_COMPLETED; +} + + +/* + * Decompress and return some data in the multi-pass case. + * Always attempts to emit one fully interleaved MCU row ("iMCU" row). + * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED. + * + * NB: output_buf contains a plane for each component in image. + */ + +METHODDEF(int) +decompress_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; + JDIMENSION block_num; + int ci, block_row, block_rows; + JBLOCKARRAY buffer; + JBLOCKROW buffer_ptr; + JSAMPARRAY output_ptr; + JDIMENSION output_col; + jpeg_component_info *compptr; + inverse_DCT_method_ptr inverse_DCT; + + /* Force some input to be done if we are getting ahead of the input. */ + while (cinfo->input_scan_number < cinfo->output_scan_number || + (cinfo->input_scan_number == cinfo->output_scan_number && + cinfo->input_iMCU_row <= cinfo->output_iMCU_row)) { + if ((*cinfo->inputctl->consume_input)(cinfo) == JPEG_SUSPENDED) + return JPEG_SUSPENDED; + } + + /* OK, output from the virtual arrays. */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Don't bother to IDCT an uninteresting component. */ + if (! compptr->component_needed) + continue; + /* Align the virtual buffer for this component. */ + buffer = (*cinfo->mem->access_virt_barray) + ((j_common_ptr) cinfo, coef->whole_image[ci], + cinfo->output_iMCU_row * compptr->v_samp_factor, + (JDIMENSION) compptr->v_samp_factor, FALSE); + /* Count non-dummy DCT block rows in this iMCU row. */ + if (cinfo->output_iMCU_row < last_iMCU_row) + block_rows = compptr->v_samp_factor; + else { + /* NB: can't use last_row_height here; it is input-side-dependent! */ + block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor); + if (block_rows == 0) block_rows = compptr->v_samp_factor; + } + inverse_DCT = cinfo->idct->inverse_DCT[ci]; + output_ptr = output_buf[ci]; + /* Loop over all DCT blocks to be processed. */ + for (block_row = 0; block_row < block_rows; block_row++) { + buffer_ptr = buffer[block_row]; + output_col = 0; + for (block_num = 0; block_num < compptr->width_in_blocks; block_num++) { + (*inverse_DCT) (cinfo, compptr, (JCOEFPTR) buffer_ptr, + output_ptr, output_col); + buffer_ptr++; + output_col += compptr->DCT_h_scaled_size; + } + output_ptr += compptr->DCT_v_scaled_size; + } + } + + if (++(cinfo->output_iMCU_row) < cinfo->total_iMCU_rows) + return JPEG_ROW_COMPLETED; + return JPEG_SCAN_COMPLETED; +} + +#endif /* D_MULTISCAN_FILES_SUPPORTED */ + + +#ifdef BLOCK_SMOOTHING_SUPPORTED + +/* + * This code applies interblock smoothing as described by section K.8 + * of the JPEG standard: the first 5 AC coefficients are estimated from + * the DC values of a DCT block and its 8 neighboring blocks. + * We apply smoothing only for progressive JPEG decoding, and only if + * the coefficients it can estimate are not yet known to full precision. + */ + +/* Natural-order array positions of the first 5 zigzag-order coefficients */ +#define Q01_POS 1 +#define Q10_POS 8 +#define Q20_POS 16 +#define Q11_POS 9 +#define Q02_POS 2 + +/* + * Determine whether block smoothing is applicable and safe. + * We also latch the current states of the coef_bits[] entries for the + * AC coefficients; otherwise, if the input side of the decompressor + * advances into a new scan, we might think the coefficients are known + * more accurately than they really are. + */ + +LOCAL(boolean) +smoothing_ok (j_decompress_ptr cinfo) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + boolean smoothing_useful = FALSE; + int ci, coefi; + jpeg_component_info *compptr; + JQUANT_TBL * qtable; + int * coef_bits; + int * coef_bits_latch; + + if (! cinfo->progressive_mode || cinfo->coef_bits == NULL) + return FALSE; + + /* Allocate latch area if not already done */ + if (coef->coef_bits_latch == NULL) + coef->coef_bits_latch = (int *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + cinfo->num_components * + (SAVED_COEFS * SIZEOF(int))); + coef_bits_latch = coef->coef_bits_latch; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* All components' quantization values must already be latched. */ + if ((qtable = compptr->quant_table) == NULL) + return FALSE; + /* Verify DC & first 5 AC quantizers are nonzero to avoid zero-divide. */ + if (qtable->quantval[0] == 0 || + qtable->quantval[Q01_POS] == 0 || + qtable->quantval[Q10_POS] == 0 || + qtable->quantval[Q20_POS] == 0 || + qtable->quantval[Q11_POS] == 0 || + qtable->quantval[Q02_POS] == 0) + return FALSE; + /* DC values must be at least partly known for all components. */ + coef_bits = cinfo->coef_bits[ci]; + if (coef_bits[0] < 0) + return FALSE; + /* Block smoothing is helpful if some AC coefficients remain inaccurate. */ + for (coefi = 1; coefi <= 5; coefi++) { + coef_bits_latch[coefi] = coef_bits[coefi]; + if (coef_bits[coefi] != 0) + smoothing_useful = TRUE; + } + coef_bits_latch += SAVED_COEFS; + } + + return smoothing_useful; +} + + +/* + * Variant of decompress_data for use when doing block smoothing. + */ + +METHODDEF(int) +decompress_smooth_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; + JDIMENSION block_num, last_block_column; + int ci, block_row, block_rows, access_rows; + JBLOCKARRAY buffer; + JBLOCKROW buffer_ptr, prev_block_row, next_block_row; + JSAMPARRAY output_ptr; + JDIMENSION output_col; + jpeg_component_info *compptr; + inverse_DCT_method_ptr inverse_DCT; + boolean first_row, last_row; + JBLOCK workspace; + int *coef_bits; + JQUANT_TBL *quanttbl; + INT32 Q00,Q01,Q02,Q10,Q11,Q20, num; + int DC1,DC2,DC3,DC4,DC5,DC6,DC7,DC8,DC9; + int Al, pred; + + /* Force some input to be done if we are getting ahead of the input. */ + while (cinfo->input_scan_number <= cinfo->output_scan_number && + ! cinfo->inputctl->eoi_reached) { + if (cinfo->input_scan_number == cinfo->output_scan_number) { + /* If input is working on current scan, we ordinarily want it to + * have completed the current row. But if input scan is DC, + * we want it to keep one row ahead so that next block row's DC + * values are up to date. + */ + JDIMENSION delta = (cinfo->Ss == 0) ? 1 : 0; + if (cinfo->input_iMCU_row > cinfo->output_iMCU_row+delta) + break; + } + if ((*cinfo->inputctl->consume_input)(cinfo) == JPEG_SUSPENDED) + return JPEG_SUSPENDED; + } + + /* OK, output from the virtual arrays. */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Don't bother to IDCT an uninteresting component. */ + if (! compptr->component_needed) + continue; + /* Count non-dummy DCT block rows in this iMCU row. */ + if (cinfo->output_iMCU_row < last_iMCU_row) { + block_rows = compptr->v_samp_factor; + access_rows = block_rows * 2; /* this and next iMCU row */ + last_row = FALSE; + } else { + /* NB: can't use last_row_height here; it is input-side-dependent! */ + block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor); + if (block_rows == 0) block_rows = compptr->v_samp_factor; + access_rows = block_rows; /* this iMCU row only */ + last_row = TRUE; + } + /* Align the virtual buffer for this component. */ + if (cinfo->output_iMCU_row > 0) { + access_rows += compptr->v_samp_factor; /* prior iMCU row too */ + buffer = (*cinfo->mem->access_virt_barray) + ((j_common_ptr) cinfo, coef->whole_image[ci], + (cinfo->output_iMCU_row - 1) * compptr->v_samp_factor, + (JDIMENSION) access_rows, FALSE); + buffer += compptr->v_samp_factor; /* point to current iMCU row */ + first_row = FALSE; + } else { + buffer = (*cinfo->mem->access_virt_barray) + ((j_common_ptr) cinfo, coef->whole_image[ci], + (JDIMENSION) 0, (JDIMENSION) access_rows, FALSE); + first_row = TRUE; + } + /* Fetch component-dependent info */ + coef_bits = coef->coef_bits_latch + (ci * SAVED_COEFS); + quanttbl = compptr->quant_table; + Q00 = quanttbl->quantval[0]; + Q01 = quanttbl->quantval[Q01_POS]; + Q10 = quanttbl->quantval[Q10_POS]; + Q20 = quanttbl->quantval[Q20_POS]; + Q11 = quanttbl->quantval[Q11_POS]; + Q02 = quanttbl->quantval[Q02_POS]; + inverse_DCT = cinfo->idct->inverse_DCT[ci]; + output_ptr = output_buf[ci]; + /* Loop over all DCT blocks to be processed. */ + for (block_row = 0; block_row < block_rows; block_row++) { + buffer_ptr = buffer[block_row]; + if (first_row && block_row == 0) + prev_block_row = buffer_ptr; + else + prev_block_row = buffer[block_row-1]; + if (last_row && block_row == block_rows-1) + next_block_row = buffer_ptr; + else + next_block_row = buffer[block_row+1]; + /* We fetch the surrounding DC values using a sliding-register approach. + * Initialize all nine here so as to do the right thing on narrow pics. + */ + DC1 = DC2 = DC3 = (int) prev_block_row[0][0]; + DC4 = DC5 = DC6 = (int) buffer_ptr[0][0]; + DC7 = DC8 = DC9 = (int) next_block_row[0][0]; + output_col = 0; + last_block_column = compptr->width_in_blocks - 1; + for (block_num = 0; block_num <= last_block_column; block_num++) { + /* Fetch current DCT block into workspace so we can modify it. */ + jcopy_block_row(buffer_ptr, (JBLOCKROW) workspace, (JDIMENSION) 1); + /* Update DC values */ + if (block_num < last_block_column) { + DC3 = (int) prev_block_row[1][0]; + DC6 = (int) buffer_ptr[1][0]; + DC9 = (int) next_block_row[1][0]; + } + /* Compute coefficient estimates per K.8. + * An estimate is applied only if coefficient is still zero, + * and is not known to be fully accurate. + */ + /* AC01 */ + if ((Al=coef_bits[1]) != 0 && workspace[1] == 0) { + num = 36 * Q00 * (DC4 - DC6); + if (num >= 0) { + pred = (int) (((Q01<<7) + num) / (Q01<<8)); + if (Al > 0 && pred >= (1< 0 && pred >= (1<= 0) { + pred = (int) (((Q10<<7) + num) / (Q10<<8)); + if (Al > 0 && pred >= (1< 0 && pred >= (1<= 0) { + pred = (int) (((Q20<<7) + num) / (Q20<<8)); + if (Al > 0 && pred >= (1< 0 && pred >= (1<= 0) { + pred = (int) (((Q11<<7) + num) / (Q11<<8)); + if (Al > 0 && pred >= (1< 0 && pred >= (1<= 0) { + pred = (int) (((Q02<<7) + num) / (Q02<<8)); + if (Al > 0 && pred >= (1< 0 && pred >= (1<DCT_h_scaled_size; + } + output_ptr += compptr->DCT_v_scaled_size; + } + } + + if (++(cinfo->output_iMCU_row) < cinfo->total_iMCU_rows) + return JPEG_ROW_COMPLETED; + return JPEG_SCAN_COMPLETED; +} + +#endif /* BLOCK_SMOOTHING_SUPPORTED */ + + +/* + * Initialize coefficient buffer controller. + */ + +GLOBAL(void) +jinit_d_coef_controller (j_decompress_ptr cinfo, boolean need_full_buffer) +{ + my_coef_ptr coef; + + coef = (my_coef_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_coef_controller)); + cinfo->coef = (struct jpeg_d_coef_controller *) coef; + coef->pub.start_input_pass = start_input_pass; + coef->pub.start_output_pass = start_output_pass; +#ifdef BLOCK_SMOOTHING_SUPPORTED + coef->coef_bits_latch = NULL; +#endif + + /* Create the coefficient buffer. */ + if (need_full_buffer) { +#ifdef D_MULTISCAN_FILES_SUPPORTED + /* Allocate a full-image virtual array for each component, */ + /* padded to a multiple of samp_factor DCT blocks in each direction. */ + /* Note we ask for a pre-zeroed array. */ + int ci, access_rows; + jpeg_component_info *compptr; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + access_rows = compptr->v_samp_factor; +#ifdef BLOCK_SMOOTHING_SUPPORTED + /* If block smoothing could be used, need a bigger window */ + if (cinfo->progressive_mode) + access_rows *= 3; +#endif + coef->whole_image[ci] = (*cinfo->mem->request_virt_barray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, TRUE, + (JDIMENSION) jround_up((long) compptr->width_in_blocks, + (long) compptr->h_samp_factor), + (JDIMENSION) jround_up((long) compptr->height_in_blocks, + (long) compptr->v_samp_factor), + (JDIMENSION) access_rows); + } + coef->pub.consume_data = consume_data; + coef->pub.decompress_data = decompress_data; + coef->pub.coef_arrays = coef->whole_image; /* link to virtual arrays */ +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } else { + /* We only need a single-MCU buffer. */ + JBLOCKROW buffer; + int i; + + buffer = (JBLOCKROW) + (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, + D_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)); + for (i = 0; i < D_MAX_BLOCKS_IN_MCU; i++) { + coef->MCU_buffer[i] = buffer + i; + } + if (cinfo->lim_Se == 0) /* DC only case: want to bypass later */ + FMEMZERO((void FAR *) buffer, + (size_t) (D_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK))); + coef->pub.consume_data = dummy_consume_data; + coef->pub.decompress_data = decompress_onepass; + coef->pub.coef_arrays = NULL; /* flag for no virtual arrays */ + } +} diff --git a/compat/libjpeg/jdcolor.c b/compat/libjpeg/jdcolor.c new file mode 100755 index 0000000..92d3c1a --- /dev/null +++ b/compat/libjpeg/jdcolor.c @@ -0,0 +1,725 @@ +/* + * jdcolor.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 2011-2015 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains output colorspace conversion routines. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Private subobject */ + +typedef struct { + struct jpeg_color_deconverter pub; /* public fields */ + + /* Private state for YCbCr->RGB and BG_YCC->RGB conversion */ + int * Cr_r_tab; /* => table for Cr to R conversion */ + int * Cb_b_tab; /* => table for Cb to B conversion */ + INT32 * Cr_g_tab; /* => table for Cr to G conversion */ + INT32 * Cb_g_tab; /* => table for Cb to G conversion */ + + /* Private state for RGB->Y conversion */ + INT32 * rgb_y_tab; /* => table for RGB to Y conversion */ +} my_color_deconverter; + +typedef my_color_deconverter * my_cconvert_ptr; + + +/*************** YCbCr -> RGB conversion: most common case **************/ +/*************** BG_YCC -> RGB conversion: less common case **************/ +/*************** RGB -> Y conversion: less common case **************/ + +/* + * YCbCr is defined per Recommendation ITU-R BT.601-7 (03/2011), + * previously known as Recommendation CCIR 601-1, except that Cb and Cr + * are normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5. + * sRGB (standard RGB color space) is defined per IEC 61966-2-1:1999. + * sYCC (standard luma-chroma-chroma color space with extended gamut) + * is defined per IEC 61966-2-1:1999 Amendment A1:2003 Annex F. + * bg-sRGB and bg-sYCC (big gamut standard color spaces) + * are defined per IEC 61966-2-1:1999 Amendment A1:2003 Annex G. + * Note that the derived conversion coefficients given in some of these + * documents are imprecise. The general conversion equations are + * + * R = Y + K * (1 - Kr) * Cr + * G = Y - K * (Kb * (1 - Kb) * Cb + Kr * (1 - Kr) * Cr) / (1 - Kr - Kb) + * B = Y + K * (1 - Kb) * Cb + * + * Y = Kr * R + (1 - Kr - Kb) * G + Kb * B + * + * With Kr = 0.299 and Kb = 0.114 (derived according to SMPTE RP 177-1993 + * from the 1953 FCC NTSC primaries and CIE Illuminant C), K = 2 for sYCC, + * the conversion equations to be implemented are therefore + * + * R = Y + 1.402 * Cr + * G = Y - 0.344136286 * Cb - 0.714136286 * Cr + * B = Y + 1.772 * Cb + * + * Y = 0.299 * R + 0.587 * G + 0.114 * B + * + * where Cb and Cr represent the incoming values less CENTERJSAMPLE. + * For bg-sYCC, with K = 4, the equations are + * + * R = Y + 2.804 * Cr + * G = Y - 0.688272572 * Cb - 1.428272572 * Cr + * B = Y + 3.544 * Cb + * + * To avoid floating-point arithmetic, we represent the fractional constants + * as integers scaled up by 2^16 (about 4 digits precision); we have to divide + * the products by 2^16, with appropriate rounding, to get the correct answer. + * Notice that Y, being an integral input, does not contribute any fraction + * so it need not participate in the rounding. + * + * For even more speed, we avoid doing any multiplications in the inner loop + * by precalculating the constants times Cb and Cr for all possible values. + * For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table); + * for 9-bit to 12-bit samples it is still acceptable. It's not very + * reasonable for 16-bit samples, but if you want lossless storage you + * shouldn't be changing colorspace anyway. + * The Cr=>R and Cb=>B values can be rounded to integers in advance; the + * values for the G calculation are left scaled up, since we must add them + * together before rounding. + */ + +#define SCALEBITS 16 /* speediest right-shift on some machines */ +#define ONE_HALF ((INT32) 1 << (SCALEBITS-1)) +#define FIX(x) ((INT32) ((x) * (1L<Y conversion and divide it up into + * three parts, instead of doing three alloc_small requests. This lets us + * use a single table base address, which can be held in a register in the + * inner loops on many machines (more than can hold all three addresses, + * anyway). + */ + +#define R_Y_OFF 0 /* offset to R => Y section */ +#define G_Y_OFF (1*(MAXJSAMPLE+1)) /* offset to G => Y section */ +#define B_Y_OFF (2*(MAXJSAMPLE+1)) /* etc. */ +#define TABLE_SIZE (3*(MAXJSAMPLE+1)) + + +/* + * Initialize tables for YCbCr->RGB and BG_YCC->RGB colorspace conversion. + */ + +LOCAL(void) +build_ycc_rgb_table (j_decompress_ptr cinfo) +/* Normal case, sYCC */ +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + int i; + INT32 x; + SHIFT_TEMPS + + cconvert->Cr_r_tab = (int *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(int)); + cconvert->Cb_b_tab = (int *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(int)); + cconvert->Cr_g_tab = (INT32 *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(INT32)); + cconvert->Cb_g_tab = (INT32 *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(INT32)); + + for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) { + /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */ + /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */ + /* Cr=>R value is nearest int to 1.402 * x */ + cconvert->Cr_r_tab[i] = (int) + RIGHT_SHIFT(FIX(1.402) * x + ONE_HALF, SCALEBITS); + /* Cb=>B value is nearest int to 1.772 * x */ + cconvert->Cb_b_tab[i] = (int) + RIGHT_SHIFT(FIX(1.772) * x + ONE_HALF, SCALEBITS); + /* Cr=>G value is scaled-up -0.714136286 * x */ + cconvert->Cr_g_tab[i] = (- FIX(0.714136286)) * x; + /* Cb=>G value is scaled-up -0.344136286 * x */ + /* We also add in ONE_HALF so that need not do it in inner loop */ + cconvert->Cb_g_tab[i] = (- FIX(0.344136286)) * x + ONE_HALF; + } +} + + +LOCAL(void) +build_bg_ycc_rgb_table (j_decompress_ptr cinfo) +/* Wide gamut case, bg-sYCC */ +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + int i; + INT32 x; + SHIFT_TEMPS + + cconvert->Cr_r_tab = (int *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(int)); + cconvert->Cb_b_tab = (int *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(int)); + cconvert->Cr_g_tab = (INT32 *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(INT32)); + cconvert->Cb_g_tab = (INT32 *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(INT32)); + + for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) { + /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */ + /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */ + /* Cr=>R value is nearest int to 2.804 * x */ + cconvert->Cr_r_tab[i] = (int) + RIGHT_SHIFT(FIX(2.804) * x + ONE_HALF, SCALEBITS); + /* Cb=>B value is nearest int to 3.544 * x */ + cconvert->Cb_b_tab[i] = (int) + RIGHT_SHIFT(FIX(3.544) * x + ONE_HALF, SCALEBITS); + /* Cr=>G value is scaled-up -1.428272572 * x */ + cconvert->Cr_g_tab[i] = (- FIX(1.428272572)) * x; + /* Cb=>G value is scaled-up -0.688272572 * x */ + /* We also add in ONE_HALF so that need not do it in inner loop */ + cconvert->Cb_g_tab[i] = (- FIX(0.688272572)) * x + ONE_HALF; + } +} + + +/* + * Convert some rows of samples to the output colorspace. + * + * Note that we change from noninterleaved, one-plane-per-component format + * to interleaved-pixel format. The output buffer is therefore three times + * as wide as the input buffer. + * A starting row offset is provided only for the input buffer. The caller + * can easily adjust the passed output_buf value to accommodate any row + * offset required on that side. + */ + +METHODDEF(void) +ycc_rgb_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + register int y, cb, cr; + register JSAMPROW outptr; + register JSAMPROW inptr0, inptr1, inptr2; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->output_width; + /* copy these pointers into registers if possible */ + register JSAMPLE * range_limit = cinfo->sample_range_limit; + register int * Crrtab = cconvert->Cr_r_tab; + register int * Cbbtab = cconvert->Cb_b_tab; + register INT32 * Crgtab = cconvert->Cr_g_tab; + register INT32 * Cbgtab = cconvert->Cb_g_tab; + SHIFT_TEMPS + + while (--num_rows >= 0) { + inptr0 = input_buf[0][input_row]; + inptr1 = input_buf[1][input_row]; + inptr2 = input_buf[2][input_row]; + input_row++; + outptr = *output_buf++; + for (col = 0; col < num_cols; col++) { + y = GETJSAMPLE(inptr0[col]); + cb = GETJSAMPLE(inptr1[col]); + cr = GETJSAMPLE(inptr2[col]); + /* Range-limiting is essential due to noise introduced by DCT losses, + * for extended gamut (sYCC) and wide gamut (bg-sYCC) encodings. + */ + outptr[RGB_RED] = range_limit[y + Crrtab[cr]]; + outptr[RGB_GREEN] = range_limit[y + + ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], + SCALEBITS))]; + outptr[RGB_BLUE] = range_limit[y + Cbbtab[cb]]; + outptr += RGB_PIXELSIZE; + } + } +} + + +/**************** Cases other than YCC -> RGB ****************/ + + +/* + * Initialize for RGB->grayscale colorspace conversion. + */ + +LOCAL(void) +build_rgb_y_table (j_decompress_ptr cinfo) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + INT32 * rgb_y_tab; + INT32 i; + + /* Allocate and fill in the conversion tables. */ + cconvert->rgb_y_tab = rgb_y_tab = (INT32 *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (TABLE_SIZE * SIZEOF(INT32))); + + for (i = 0; i <= MAXJSAMPLE; i++) { + rgb_y_tab[i+R_Y_OFF] = FIX(0.299) * i; + rgb_y_tab[i+G_Y_OFF] = FIX(0.587) * i; + rgb_y_tab[i+B_Y_OFF] = FIX(0.114) * i + ONE_HALF; + } +} + + +/* + * Convert RGB to grayscale. + */ + +METHODDEF(void) +rgb_gray_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + register INT32 * ctab = cconvert->rgb_y_tab; + register int r, g, b; + register JSAMPROW outptr; + register JSAMPROW inptr0, inptr1, inptr2; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->output_width; + + while (--num_rows >= 0) { + inptr0 = input_buf[0][input_row]; + inptr1 = input_buf[1][input_row]; + inptr2 = input_buf[2][input_row]; + input_row++; + outptr = *output_buf++; + for (col = 0; col < num_cols; col++) { + r = GETJSAMPLE(inptr0[col]); + g = GETJSAMPLE(inptr1[col]); + b = GETJSAMPLE(inptr2[col]); + /* Y */ + outptr[col] = (JSAMPLE) + ((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF]) + >> SCALEBITS); + } + } +} + + +/* + * [R-G,G,B-G] to [R,G,B] conversion with modulo calculation + * (inverse color transform). + * This can be seen as an adaption of the general YCbCr->RGB + * conversion equation with Kr = Kb = 0, while replacing the + * normalization by modulo calculation. + */ + +METHODDEF(void) +rgb1_rgb_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + register int r, g, b; + register JSAMPROW outptr; + register JSAMPROW inptr0, inptr1, inptr2; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->output_width; + + while (--num_rows >= 0) { + inptr0 = input_buf[0][input_row]; + inptr1 = input_buf[1][input_row]; + inptr2 = input_buf[2][input_row]; + input_row++; + outptr = *output_buf++; + for (col = 0; col < num_cols; col++) { + r = GETJSAMPLE(inptr0[col]); + g = GETJSAMPLE(inptr1[col]); + b = GETJSAMPLE(inptr2[col]); + /* Assume that MAXJSAMPLE+1 is a power of 2, so that the MOD + * (modulo) operator is equivalent to the bitmask operator AND. + */ + outptr[RGB_RED] = (JSAMPLE) ((r + g - CENTERJSAMPLE) & MAXJSAMPLE); + outptr[RGB_GREEN] = (JSAMPLE) g; + outptr[RGB_BLUE] = (JSAMPLE) ((b + g - CENTERJSAMPLE) & MAXJSAMPLE); + outptr += RGB_PIXELSIZE; + } + } +} + + +/* + * [R-G,G,B-G] to grayscale conversion with modulo calculation + * (inverse color transform). + */ + +METHODDEF(void) +rgb1_gray_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + register INT32 * ctab = cconvert->rgb_y_tab; + register int r, g, b; + register JSAMPROW outptr; + register JSAMPROW inptr0, inptr1, inptr2; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->output_width; + + while (--num_rows >= 0) { + inptr0 = input_buf[0][input_row]; + inptr1 = input_buf[1][input_row]; + inptr2 = input_buf[2][input_row]; + input_row++; + outptr = *output_buf++; + for (col = 0; col < num_cols; col++) { + r = GETJSAMPLE(inptr0[col]); + g = GETJSAMPLE(inptr1[col]); + b = GETJSAMPLE(inptr2[col]); + /* Assume that MAXJSAMPLE+1 is a power of 2, so that the MOD + * (modulo) operator is equivalent to the bitmask operator AND. + */ + r = (r + g - CENTERJSAMPLE) & MAXJSAMPLE; + b = (b + g - CENTERJSAMPLE) & MAXJSAMPLE; + /* Y */ + outptr[col] = (JSAMPLE) + ((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF]) + >> SCALEBITS); + } + } +} + + +/* + * No colorspace change, but conversion from separate-planes + * to interleaved representation. + */ + +METHODDEF(void) +rgb_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + register JSAMPROW outptr; + register JSAMPROW inptr0, inptr1, inptr2; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->output_width; + + while (--num_rows >= 0) { + inptr0 = input_buf[0][input_row]; + inptr1 = input_buf[1][input_row]; + inptr2 = input_buf[2][input_row]; + input_row++; + outptr = *output_buf++; + for (col = 0; col < num_cols; col++) { + /* We can dispense with GETJSAMPLE() here */ + outptr[RGB_RED] = inptr0[col]; + outptr[RGB_GREEN] = inptr1[col]; + outptr[RGB_BLUE] = inptr2[col]; + outptr += RGB_PIXELSIZE; + } + } +} + + +/* + * Color conversion for no colorspace change: just copy the data, + * converting from separate-planes to interleaved representation. + */ + +METHODDEF(void) +null_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + int ci; + register int nc = cinfo->num_components; + register JSAMPROW outptr; + register JSAMPROW inptr; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->output_width; + + while (--num_rows >= 0) { + for (ci = 0; ci < nc; ci++) { + inptr = input_buf[ci][input_row]; + outptr = output_buf[0] + ci; + for (col = 0; col < num_cols; col++) { + *outptr = *inptr++; /* needn't bother with GETJSAMPLE() here */ + outptr += nc; + } + } + input_row++; + output_buf++; + } +} + + +/* + * Color conversion for grayscale: just copy the data. + * This also works for YCC -> grayscale conversion, in which + * we just copy the Y (luminance) component and ignore chrominance. + */ + +METHODDEF(void) +grayscale_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + jcopy_sample_rows(input_buf[0], (int) input_row, output_buf, 0, + num_rows, cinfo->output_width); +} + + +/* + * Convert grayscale to RGB: just duplicate the graylevel three times. + * This is provided to support applications that don't want to cope + * with grayscale as a separate case. + */ + +METHODDEF(void) +gray_rgb_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + register JSAMPROW outptr; + register JSAMPROW inptr; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->output_width; + + while (--num_rows >= 0) { + inptr = input_buf[0][input_row++]; + outptr = *output_buf++; + for (col = 0; col < num_cols; col++) { + /* We can dispense with GETJSAMPLE() here */ + outptr[RGB_RED] = outptr[RGB_GREEN] = outptr[RGB_BLUE] = inptr[col]; + outptr += RGB_PIXELSIZE; + } + } +} + + +/* + * Adobe-style YCCK->CMYK conversion. + * We convert YCbCr to R=1-C, G=1-M, and B=1-Y using the same + * conversion as above, while passing K (black) unchanged. + * We assume build_ycc_rgb_table has been called. + */ + +METHODDEF(void) +ycck_cmyk_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + register int y, cb, cr; + register JSAMPROW outptr; + register JSAMPROW inptr0, inptr1, inptr2, inptr3; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->output_width; + /* copy these pointers into registers if possible */ + register JSAMPLE * range_limit = cinfo->sample_range_limit; + register int * Crrtab = cconvert->Cr_r_tab; + register int * Cbbtab = cconvert->Cb_b_tab; + register INT32 * Crgtab = cconvert->Cr_g_tab; + register INT32 * Cbgtab = cconvert->Cb_g_tab; + SHIFT_TEMPS + + while (--num_rows >= 0) { + inptr0 = input_buf[0][input_row]; + inptr1 = input_buf[1][input_row]; + inptr2 = input_buf[2][input_row]; + inptr3 = input_buf[3][input_row]; + input_row++; + outptr = *output_buf++; + for (col = 0; col < num_cols; col++) { + y = GETJSAMPLE(inptr0[col]); + cb = GETJSAMPLE(inptr1[col]); + cr = GETJSAMPLE(inptr2[col]); + /* Range-limiting is essential due to noise introduced by DCT losses, + * and for extended gamut encodings (sYCC). + */ + outptr[0] = range_limit[MAXJSAMPLE - (y + Crrtab[cr])]; /* red */ + outptr[1] = range_limit[MAXJSAMPLE - (y + /* green */ + ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], + SCALEBITS)))]; + outptr[2] = range_limit[MAXJSAMPLE - (y + Cbbtab[cb])]; /* blue */ + /* K passes through unchanged */ + outptr[3] = inptr3[col]; /* don't need GETJSAMPLE here */ + outptr += 4; + } + } +} + + +/* + * Empty method for start_pass. + */ + +METHODDEF(void) +start_pass_dcolor (j_decompress_ptr cinfo) +{ + /* no work needed */ +} + + +/* + * Module initialization routine for output colorspace conversion. + */ + +GLOBAL(void) +jinit_color_deconverter (j_decompress_ptr cinfo) +{ + my_cconvert_ptr cconvert; + int ci; + + cconvert = (my_cconvert_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_color_deconverter)); + cinfo->cconvert = &cconvert->pub; + cconvert->pub.start_pass = start_pass_dcolor; + + /* Make sure num_components agrees with jpeg_color_space */ + switch (cinfo->jpeg_color_space) { + case JCS_GRAYSCALE: + if (cinfo->num_components != 1) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + break; + + case JCS_RGB: + case JCS_YCbCr: + case JCS_BG_RGB: + case JCS_BG_YCC: + if (cinfo->num_components != 3) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + break; + + case JCS_CMYK: + case JCS_YCCK: + if (cinfo->num_components != 4) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + break; + + default: /* JCS_UNKNOWN can be anything */ + if (cinfo->num_components < 1) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + break; + } + + /* Support color transform only for RGB colorspaces */ + if (cinfo->color_transform && + cinfo->jpeg_color_space != JCS_RGB && + cinfo->jpeg_color_space != JCS_BG_RGB) + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + + /* Set out_color_components and conversion method based on requested space. + * Also clear the component_needed flags for any unused components, + * so that earlier pipeline stages can avoid useless computation. + */ + + switch (cinfo->out_color_space) { + case JCS_GRAYSCALE: + cinfo->out_color_components = 1; + switch (cinfo->jpeg_color_space) { + case JCS_GRAYSCALE: + case JCS_YCbCr: + case JCS_BG_YCC: + cconvert->pub.color_convert = grayscale_convert; + /* For color->grayscale conversion, only the Y (0) component is needed */ + for (ci = 1; ci < cinfo->num_components; ci++) + cinfo->comp_info[ci].component_needed = FALSE; + break; + case JCS_RGB: + switch (cinfo->color_transform) { + case JCT_NONE: + cconvert->pub.color_convert = rgb_gray_convert; + break; + case JCT_SUBTRACT_GREEN: + cconvert->pub.color_convert = rgb1_gray_convert; + break; + default: + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + } + build_rgb_y_table(cinfo); + break; + default: + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + } + break; + + case JCS_RGB: + cinfo->out_color_components = RGB_PIXELSIZE; + switch (cinfo->jpeg_color_space) { + case JCS_GRAYSCALE: + cconvert->pub.color_convert = gray_rgb_convert; + break; + case JCS_YCbCr: + cconvert->pub.color_convert = ycc_rgb_convert; + build_ycc_rgb_table(cinfo); + break; + case JCS_BG_YCC: + cconvert->pub.color_convert = ycc_rgb_convert; + build_bg_ycc_rgb_table(cinfo); + break; + case JCS_RGB: + switch (cinfo->color_transform) { + case JCT_NONE: + cconvert->pub.color_convert = rgb_convert; + break; + case JCT_SUBTRACT_GREEN: + cconvert->pub.color_convert = rgb1_rgb_convert; + break; + default: + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + } + break; + default: + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + } + break; + + case JCS_BG_RGB: + cinfo->out_color_components = RGB_PIXELSIZE; + if (cinfo->jpeg_color_space == JCS_BG_RGB) { + switch (cinfo->color_transform) { + case JCT_NONE: + cconvert->pub.color_convert = rgb_convert; + break; + case JCT_SUBTRACT_GREEN: + cconvert->pub.color_convert = rgb1_rgb_convert; + break; + default: + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + } + } else + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + + case JCS_CMYK: + cinfo->out_color_components = 4; + switch (cinfo->jpeg_color_space) { + case JCS_YCCK: + cconvert->pub.color_convert = ycck_cmyk_convert; + build_ycc_rgb_table(cinfo); + break; + case JCS_CMYK: + cconvert->pub.color_convert = null_convert; + break; + default: + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + } + break; + + default: + /* Permit null conversion to same output space */ + if (cinfo->out_color_space == cinfo->jpeg_color_space) { + cinfo->out_color_components = cinfo->num_components; + cconvert->pub.color_convert = null_convert; + } else /* unsupported non-null conversion */ + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + } + + if (cinfo->quantize_colors) + cinfo->output_components = 1; /* single colormapped output component */ + else + cinfo->output_components = cinfo->out_color_components; +} diff --git a/compat/libjpeg/jdct.h b/compat/libjpeg/jdct.h new file mode 100755 index 0000000..5f631f4 --- /dev/null +++ b/compat/libjpeg/jdct.h @@ -0,0 +1,417 @@ +/* + * jdct.h + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2002-2015 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This include file contains common declarations for the forward and + * inverse DCT modules. These declarations are private to the DCT managers + * (jcdctmgr.c, jddctmgr.c) and the individual DCT algorithms. + * The individual DCT algorithms are kept in separate files to ease + * machine-dependent tuning (e.g., assembly coding). + */ + + +/* + * A forward DCT routine is given a pointer to an input sample array and + * a pointer to a work area of type DCTELEM[]; the DCT is to be performed + * in-place in that buffer. Type DCTELEM is int for 8-bit samples, INT32 + * for 12-bit samples. (NOTE: Floating-point DCT implementations use an + * array of type FAST_FLOAT, instead.) + * The input data is to be fetched from the sample array starting at a + * specified column. (Any row offset needed will be applied to the array + * pointer before it is passed to the FDCT code.) + * Note that the number of samples fetched by the FDCT routine is + * DCT_h_scaled_size * DCT_v_scaled_size. + * The DCT outputs are returned scaled up by a factor of 8; they therefore + * have a range of +-8K for 8-bit data, +-128K for 12-bit data. This + * convention improves accuracy in integer implementations and saves some + * work in floating-point ones. + * Quantization of the output coefficients is done by jcdctmgr.c. + */ + +#if BITS_IN_JSAMPLE == 8 +typedef int DCTELEM; /* 16 or 32 bits is fine */ +#else +typedef INT32 DCTELEM; /* must have 32 bits */ +#endif + +typedef JMETHOD(void, forward_DCT_method_ptr, (DCTELEM * data, + JSAMPARRAY sample_data, + JDIMENSION start_col)); +typedef JMETHOD(void, float_DCT_method_ptr, (FAST_FLOAT * data, + JSAMPARRAY sample_data, + JDIMENSION start_col)); + + +/* + * An inverse DCT routine is given a pointer to the input JBLOCK and a pointer + * to an output sample array. The routine must dequantize the input data as + * well as perform the IDCT; for dequantization, it uses the multiplier table + * pointed to by compptr->dct_table. The output data is to be placed into the + * sample array starting at a specified column. (Any row offset needed will + * be applied to the array pointer before it is passed to the IDCT code.) + * Note that the number of samples emitted by the IDCT routine is + * DCT_h_scaled_size * DCT_v_scaled_size. + */ + +/* typedef inverse_DCT_method_ptr is declared in jpegint.h */ + +/* + * Each IDCT routine has its own ideas about the best dct_table element type. + */ + +typedef MULTIPLIER ISLOW_MULT_TYPE; /* short or int, whichever is faster */ +#if BITS_IN_JSAMPLE == 8 +typedef MULTIPLIER IFAST_MULT_TYPE; /* 16 bits is OK, use short if faster */ +#define IFAST_SCALE_BITS 2 /* fractional bits in scale factors */ +#else +typedef INT32 IFAST_MULT_TYPE; /* need 32 bits for scaled quantizers */ +#define IFAST_SCALE_BITS 13 /* fractional bits in scale factors */ +#endif +typedef FAST_FLOAT FLOAT_MULT_TYPE; /* preferred floating type */ + + +/* + * Each IDCT routine is responsible for range-limiting its results and + * converting them to unsigned form (0..MAXJSAMPLE). The raw outputs could + * be quite far out of range if the input data is corrupt, so a bulletproof + * range-limiting step is required. We use a mask-and-table-lookup method + * to do the combined operations quickly, assuming that MAXJSAMPLE+1 + * is a power of 2. See the comments with prepare_range_limit_table + * (in jdmaster.c) for more info. + */ + +#define RANGE_MASK (MAXJSAMPLE * 4 + 3) /* 2 bits wider than legal samples */ +#define RANGE_CENTER (MAXJSAMPLE * 2 + 2) +#define RANGE_SUBSET (RANGE_CENTER - CENTERJSAMPLE) + +#define IDCT_range_limit(cinfo) ((cinfo)->sample_range_limit - RANGE_SUBSET) + + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jpeg_fdct_islow jFDislow +#define jpeg_fdct_ifast jFDifast +#define jpeg_fdct_float jFDfloat +#define jpeg_fdct_7x7 jFD7x7 +#define jpeg_fdct_6x6 jFD6x6 +#define jpeg_fdct_5x5 jFD5x5 +#define jpeg_fdct_4x4 jFD4x4 +#define jpeg_fdct_3x3 jFD3x3 +#define jpeg_fdct_2x2 jFD2x2 +#define jpeg_fdct_1x1 jFD1x1 +#define jpeg_fdct_9x9 jFD9x9 +#define jpeg_fdct_10x10 jFD10x10 +#define jpeg_fdct_11x11 jFD11x11 +#define jpeg_fdct_12x12 jFD12x12 +#define jpeg_fdct_13x13 jFD13x13 +#define jpeg_fdct_14x14 jFD14x14 +#define jpeg_fdct_15x15 jFD15x15 +#define jpeg_fdct_16x16 jFD16x16 +#define jpeg_fdct_16x8 jFD16x8 +#define jpeg_fdct_14x7 jFD14x7 +#define jpeg_fdct_12x6 jFD12x6 +#define jpeg_fdct_10x5 jFD10x5 +#define jpeg_fdct_8x4 jFD8x4 +#define jpeg_fdct_6x3 jFD6x3 +#define jpeg_fdct_4x2 jFD4x2 +#define jpeg_fdct_2x1 jFD2x1 +#define jpeg_fdct_8x16 jFD8x16 +#define jpeg_fdct_7x14 jFD7x14 +#define jpeg_fdct_6x12 jFD6x12 +#define jpeg_fdct_5x10 jFD5x10 +#define jpeg_fdct_4x8 jFD4x8 +#define jpeg_fdct_3x6 jFD3x6 +#define jpeg_fdct_2x4 jFD2x4 +#define jpeg_fdct_1x2 jFD1x2 +#define jpeg_idct_islow jRDislow +#define jpeg_idct_ifast jRDifast +#define jpeg_idct_float jRDfloat +#define jpeg_idct_7x7 jRD7x7 +#define jpeg_idct_6x6 jRD6x6 +#define jpeg_idct_5x5 jRD5x5 +#define jpeg_idct_4x4 jRD4x4 +#define jpeg_idct_3x3 jRD3x3 +#define jpeg_idct_2x2 jRD2x2 +#define jpeg_idct_1x1 jRD1x1 +#define jpeg_idct_9x9 jRD9x9 +#define jpeg_idct_10x10 jRD10x10 +#define jpeg_idct_11x11 jRD11x11 +#define jpeg_idct_12x12 jRD12x12 +#define jpeg_idct_13x13 jRD13x13 +#define jpeg_idct_14x14 jRD14x14 +#define jpeg_idct_15x15 jRD15x15 +#define jpeg_idct_16x16 jRD16x16 +#define jpeg_idct_16x8 jRD16x8 +#define jpeg_idct_14x7 jRD14x7 +#define jpeg_idct_12x6 jRD12x6 +#define jpeg_idct_10x5 jRD10x5 +#define jpeg_idct_8x4 jRD8x4 +#define jpeg_idct_6x3 jRD6x3 +#define jpeg_idct_4x2 jRD4x2 +#define jpeg_idct_2x1 jRD2x1 +#define jpeg_idct_8x16 jRD8x16 +#define jpeg_idct_7x14 jRD7x14 +#define jpeg_idct_6x12 jRD6x12 +#define jpeg_idct_5x10 jRD5x10 +#define jpeg_idct_4x8 jRD4x8 +#define jpeg_idct_3x6 jRD3x8 +#define jpeg_idct_2x4 jRD2x4 +#define jpeg_idct_1x2 jRD1x2 +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + +/* Extern declarations for the forward and inverse DCT routines. */ + +EXTERN(void) jpeg_fdct_islow + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_ifast + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_float + JPP((FAST_FLOAT * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_7x7 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_6x6 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_5x5 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_4x4 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_3x3 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_2x2 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_1x1 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_9x9 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_10x10 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_11x11 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_12x12 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_13x13 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_14x14 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_15x15 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_16x16 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_16x8 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_14x7 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_12x6 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_10x5 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_8x4 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_6x3 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_4x2 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_2x1 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_8x16 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_7x14 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_6x12 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_5x10 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_4x8 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_3x6 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_2x4 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_1x2 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); + +EXTERN(void) jpeg_idct_islow + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_ifast + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_float + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_7x7 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_6x6 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_5x5 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_4x4 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_3x3 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_2x2 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_1x1 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_9x9 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_10x10 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_11x11 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_12x12 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_13x13 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_14x14 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_15x15 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_16x16 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_16x8 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_14x7 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_12x6 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_10x5 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_8x4 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_6x3 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_4x2 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_2x1 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_8x16 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_7x14 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_6x12 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_5x10 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_4x8 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_3x6 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_2x4 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_1x2 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); + + +/* + * Macros for handling fixed-point arithmetic; these are used by many + * but not all of the DCT/IDCT modules. + * + * All values are expected to be of type INT32. + * Fractional constants are scaled left by CONST_BITS bits. + * CONST_BITS is defined within each module using these macros, + * and may differ from one module to the next. + */ + +#define ONE ((INT32) 1) +#define CONST_SCALE (ONE << CONST_BITS) + +/* Convert a positive real constant to an integer scaled by CONST_SCALE. + * Caution: some C compilers fail to reduce "FIX(constant)" at compile time, + * thus causing a lot of useless floating-point operations at run time. + */ + +#define FIX(x) ((INT32) ((x) * CONST_SCALE + 0.5)) + +/* Descale and correctly round an INT32 value that's scaled by N bits. + * We assume RIGHT_SHIFT rounds towards minus infinity, so adding + * the fudge factor is correct for either sign of X. + */ + +#define DESCALE(x,n) RIGHT_SHIFT((x) + (ONE << ((n)-1)), n) + +/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result. + * This macro is used only when the two inputs will actually be no more than + * 16 bits wide, so that a 16x16->32 bit multiply can be used instead of a + * full 32x32 multiply. This provides a useful speedup on many machines. + * Unfortunately there is no way to specify a 16x16->32 multiply portably + * in C, but some C compilers will do the right thing if you provide the + * correct combination of casts. + */ + +#ifdef SHORTxSHORT_32 /* may work if 'int' is 32 bits */ +#define MULTIPLY16C16(var,const) (((INT16) (var)) * ((INT16) (const))) +#endif +#ifdef SHORTxLCONST_32 /* known to work with Microsoft C 6.0 */ +#define MULTIPLY16C16(var,const) (((INT16) (var)) * ((INT32) (const))) +#endif + +#ifndef MULTIPLY16C16 /* default definition */ +#define MULTIPLY16C16(var,const) ((var) * (const)) +#endif + +/* Same except both inputs are variables. */ + +#ifdef SHORTxSHORT_32 /* may work if 'int' is 32 bits */ +#define MULTIPLY16V16(var1,var2) (((INT16) (var1)) * ((INT16) (var2))) +#endif + +#ifndef MULTIPLY16V16 /* default definition */ +#define MULTIPLY16V16(var1,var2) ((var1) * (var2)) +#endif + +/* Like RIGHT_SHIFT, but applies to a DCTELEM. + * We assume that int right shift is unsigned if INT32 right shift is. + */ + +#ifdef RIGHT_SHIFT_IS_UNSIGNED +#define ISHIFT_TEMPS DCTELEM ishift_temp; +#if BITS_IN_JSAMPLE == 8 +#define DCTELEMBITS 16 /* DCTELEM may be 16 or 32 bits */ +#else +#define DCTELEMBITS 32 /* DCTELEM must be 32 bits */ +#endif +#define IRIGHT_SHIFT(x,shft) \ + ((ishift_temp = (x)) < 0 ? \ + (ishift_temp >> (shft)) | ((~((DCTELEM) 0)) << (DCTELEMBITS-(shft))) : \ + (ishift_temp >> (shft))) +#else +#define ISHIFT_TEMPS +#define IRIGHT_SHIFT(x,shft) ((x) >> (shft)) +#endif diff --git a/compat/libjpeg/jddctmgr.c b/compat/libjpeg/jddctmgr.c new file mode 100755 index 0000000..b2f5a36 --- /dev/null +++ b/compat/libjpeg/jddctmgr.c @@ -0,0 +1,384 @@ +/* + * jddctmgr.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2002-2013 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the inverse-DCT management logic. + * This code selects a particular IDCT implementation to be used, + * and it performs related housekeeping chores. No code in this file + * is executed per IDCT step, only during output pass setup. + * + * Note that the IDCT routines are responsible for performing coefficient + * dequantization as well as the IDCT proper. This module sets up the + * dequantization multiplier table needed by the IDCT routine. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + + +/* + * The decompressor input side (jdinput.c) saves away the appropriate + * quantization table for each component at the start of the first scan + * involving that component. (This is necessary in order to correctly + * decode files that reuse Q-table slots.) + * When we are ready to make an output pass, the saved Q-table is converted + * to a multiplier table that will actually be used by the IDCT routine. + * The multiplier table contents are IDCT-method-dependent. To support + * application changes in IDCT method between scans, we can remake the + * multiplier tables if necessary. + * In buffered-image mode, the first output pass may occur before any data + * has been seen for some components, and thus before their Q-tables have + * been saved away. To handle this case, multiplier tables are preset + * to zeroes; the result of the IDCT will be a neutral gray level. + */ + + +/* Private subobject for this module */ + +typedef struct { + struct jpeg_inverse_dct pub; /* public fields */ + + /* This array contains the IDCT method code that each multiplier table + * is currently set up for, or -1 if it's not yet set up. + * The actual multiplier tables are pointed to by dct_table in the + * per-component comp_info structures. + */ + int cur_method[MAX_COMPONENTS]; +} my_idct_controller; + +typedef my_idct_controller * my_idct_ptr; + + +/* Allocated multiplier tables: big enough for any supported variant */ + +typedef union { + ISLOW_MULT_TYPE islow_array[DCTSIZE2]; +#ifdef DCT_IFAST_SUPPORTED + IFAST_MULT_TYPE ifast_array[DCTSIZE2]; +#endif +#ifdef DCT_FLOAT_SUPPORTED + FLOAT_MULT_TYPE float_array[DCTSIZE2]; +#endif +} multiplier_table; + + +/* The current scaled-IDCT routines require ISLOW-style multiplier tables, + * so be sure to compile that code if either ISLOW or SCALING is requested. + */ +#ifdef DCT_ISLOW_SUPPORTED +#define PROVIDE_ISLOW_TABLES +#else +#ifdef IDCT_SCALING_SUPPORTED +#define PROVIDE_ISLOW_TABLES +#endif +#endif + + +/* + * Prepare for an output pass. + * Here we select the proper IDCT routine for each component and build + * a matching multiplier table. + */ + +METHODDEF(void) +start_pass (j_decompress_ptr cinfo) +{ + my_idct_ptr idct = (my_idct_ptr) cinfo->idct; + int ci, i; + jpeg_component_info *compptr; + int method = 0; + inverse_DCT_method_ptr method_ptr = NULL; + JQUANT_TBL * qtbl; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Select the proper IDCT routine for this component's scaling */ + switch ((compptr->DCT_h_scaled_size << 8) + compptr->DCT_v_scaled_size) { +#ifdef IDCT_SCALING_SUPPORTED + case ((1 << 8) + 1): + method_ptr = jpeg_idct_1x1; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((2 << 8) + 2): + method_ptr = jpeg_idct_2x2; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((3 << 8) + 3): + method_ptr = jpeg_idct_3x3; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((4 << 8) + 4): + method_ptr = jpeg_idct_4x4; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((5 << 8) + 5): + method_ptr = jpeg_idct_5x5; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((6 << 8) + 6): + method_ptr = jpeg_idct_6x6; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((7 << 8) + 7): + method_ptr = jpeg_idct_7x7; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((9 << 8) + 9): + method_ptr = jpeg_idct_9x9; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((10 << 8) + 10): + method_ptr = jpeg_idct_10x10; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((11 << 8) + 11): + method_ptr = jpeg_idct_11x11; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((12 << 8) + 12): + method_ptr = jpeg_idct_12x12; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((13 << 8) + 13): + method_ptr = jpeg_idct_13x13; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((14 << 8) + 14): + method_ptr = jpeg_idct_14x14; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((15 << 8) + 15): + method_ptr = jpeg_idct_15x15; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((16 << 8) + 16): + method_ptr = jpeg_idct_16x16; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((16 << 8) + 8): + method_ptr = jpeg_idct_16x8; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((14 << 8) + 7): + method_ptr = jpeg_idct_14x7; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((12 << 8) + 6): + method_ptr = jpeg_idct_12x6; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((10 << 8) + 5): + method_ptr = jpeg_idct_10x5; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((8 << 8) + 4): + method_ptr = jpeg_idct_8x4; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((6 << 8) + 3): + method_ptr = jpeg_idct_6x3; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((4 << 8) + 2): + method_ptr = jpeg_idct_4x2; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((2 << 8) + 1): + method_ptr = jpeg_idct_2x1; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((8 << 8) + 16): + method_ptr = jpeg_idct_8x16; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((7 << 8) + 14): + method_ptr = jpeg_idct_7x14; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((6 << 8) + 12): + method_ptr = jpeg_idct_6x12; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((5 << 8) + 10): + method_ptr = jpeg_idct_5x10; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((4 << 8) + 8): + method_ptr = jpeg_idct_4x8; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((3 << 8) + 6): + method_ptr = jpeg_idct_3x6; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((2 << 8) + 4): + method_ptr = jpeg_idct_2x4; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((1 << 8) + 2): + method_ptr = jpeg_idct_1x2; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; +#endif + case ((DCTSIZE << 8) + DCTSIZE): + switch (cinfo->dct_method) { +#ifdef DCT_ISLOW_SUPPORTED + case JDCT_ISLOW: + method_ptr = jpeg_idct_islow; + method = JDCT_ISLOW; + break; +#endif +#ifdef DCT_IFAST_SUPPORTED + case JDCT_IFAST: + method_ptr = jpeg_idct_ifast; + method = JDCT_IFAST; + break; +#endif +#ifdef DCT_FLOAT_SUPPORTED + case JDCT_FLOAT: + method_ptr = jpeg_idct_float; + method = JDCT_FLOAT; + break; +#endif + default: + ERREXIT(cinfo, JERR_NOT_COMPILED); + break; + } + break; + default: + ERREXIT2(cinfo, JERR_BAD_DCTSIZE, + compptr->DCT_h_scaled_size, compptr->DCT_v_scaled_size); + break; + } + idct->pub.inverse_DCT[ci] = method_ptr; + /* Create multiplier table from quant table. + * However, we can skip this if the component is uninteresting + * or if we already built the table. Also, if no quant table + * has yet been saved for the component, we leave the + * multiplier table all-zero; we'll be reading zeroes from the + * coefficient controller's buffer anyway. + */ + if (! compptr->component_needed || idct->cur_method[ci] == method) + continue; + qtbl = compptr->quant_table; + if (qtbl == NULL) /* happens if no data yet for component */ + continue; + idct->cur_method[ci] = method; + switch (method) { +#ifdef PROVIDE_ISLOW_TABLES + case JDCT_ISLOW: + { + /* For LL&M IDCT method, multipliers are equal to raw quantization + * coefficients, but are stored as ints to ensure access efficiency. + */ + ISLOW_MULT_TYPE * ismtbl = (ISLOW_MULT_TYPE *) compptr->dct_table; + for (i = 0; i < DCTSIZE2; i++) { + ismtbl[i] = (ISLOW_MULT_TYPE) qtbl->quantval[i]; + } + } + break; +#endif +#ifdef DCT_IFAST_SUPPORTED + case JDCT_IFAST: + { + /* For AA&N IDCT method, multipliers are equal to quantization + * coefficients scaled by scalefactor[row]*scalefactor[col], where + * scalefactor[0] = 1 + * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 + * For integer operation, the multiplier table is to be scaled by + * IFAST_SCALE_BITS. + */ + IFAST_MULT_TYPE * ifmtbl = (IFAST_MULT_TYPE *) compptr->dct_table; +#define CONST_BITS 14 + static const INT16 aanscales[DCTSIZE2] = { + /* precomputed values scaled up by 14 bits */ + 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, + 22725, 31521, 29692, 26722, 22725, 17855, 12299, 6270, + 21407, 29692, 27969, 25172, 21407, 16819, 11585, 5906, + 19266, 26722, 25172, 22654, 19266, 15137, 10426, 5315, + 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, + 12873, 17855, 16819, 15137, 12873, 10114, 6967, 3552, + 8867, 12299, 11585, 10426, 8867, 6967, 4799, 2446, + 4520, 6270, 5906, 5315, 4520, 3552, 2446, 1247 + }; + SHIFT_TEMPS + + for (i = 0; i < DCTSIZE2; i++) { + ifmtbl[i] = (IFAST_MULT_TYPE) + DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i], + (INT32) aanscales[i]), + CONST_BITS-IFAST_SCALE_BITS); + } + } + break; +#endif +#ifdef DCT_FLOAT_SUPPORTED + case JDCT_FLOAT: + { + /* For float AA&N IDCT method, multipliers are equal to quantization + * coefficients scaled by scalefactor[row]*scalefactor[col], where + * scalefactor[0] = 1 + * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 + * We apply a further scale factor of 1/8. + */ + FLOAT_MULT_TYPE * fmtbl = (FLOAT_MULT_TYPE *) compptr->dct_table; + int row, col; + static const double aanscalefactor[DCTSIZE] = { + 1.0, 1.387039845, 1.306562965, 1.175875602, + 1.0, 0.785694958, 0.541196100, 0.275899379 + }; + + i = 0; + for (row = 0; row < DCTSIZE; row++) { + for (col = 0; col < DCTSIZE; col++) { + fmtbl[i] = (FLOAT_MULT_TYPE) + ((double) qtbl->quantval[i] * + aanscalefactor[row] * aanscalefactor[col] * 0.125); + i++; + } + } + } + break; +#endif + default: + ERREXIT(cinfo, JERR_NOT_COMPILED); + break; + } + } +} + + +/* + * Initialize IDCT manager. + */ + +GLOBAL(void) +jinit_inverse_dct (j_decompress_ptr cinfo) +{ + my_idct_ptr idct; + int ci; + jpeg_component_info *compptr; + + idct = (my_idct_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_idct_controller)); + cinfo->idct = &idct->pub; + idct->pub.start_pass = start_pass; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Allocate and pre-zero a multiplier table for each component */ + compptr->dct_table = + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(multiplier_table)); + MEMZERO(compptr->dct_table, SIZEOF(multiplier_table)); + /* Mark multiplier table not yet set up for any method */ + idct->cur_method[ci] = -1; + } +} diff --git a/compat/libjpeg/jdhuff.c b/compat/libjpeg/jdhuff.c new file mode 100755 index 0000000..85a98bd --- /dev/null +++ b/compat/libjpeg/jdhuff.c @@ -0,0 +1,1554 @@ +/* + * jdhuff.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 2006-2013 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains Huffman entropy decoding routines. + * Both sequential and progressive modes are supported in this single module. + * + * Much of the complexity here has to do with supporting input suspension. + * If the data source module demands suspension, we want to be able to back + * up to the start of the current MCU. To do this, we copy state variables + * into local working storage, and update them back to the permanent + * storage only upon successful completion of an MCU. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Derived data constructed for each Huffman table */ + +#define HUFF_LOOKAHEAD 8 /* # of bits of lookahead */ + +typedef struct { + /* Basic tables: (element [0] of each array is unused) */ + INT32 maxcode[18]; /* largest code of length k (-1 if none) */ + /* (maxcode[17] is a sentinel to ensure jpeg_huff_decode terminates) */ + INT32 valoffset[17]; /* huffval[] offset for codes of length k */ + /* valoffset[k] = huffval[] index of 1st symbol of code length k, less + * the smallest code of length k; so given a code of length k, the + * corresponding symbol is huffval[code + valoffset[k]] + */ + + /* Link to public Huffman table (needed only in jpeg_huff_decode) */ + JHUFF_TBL *pub; + + /* Lookahead tables: indexed by the next HUFF_LOOKAHEAD bits of + * the input data stream. If the next Huffman code is no more + * than HUFF_LOOKAHEAD bits long, we can obtain its length and + * the corresponding symbol directly from these tables. + */ + int look_nbits[1< 32 bits on your machine, and shifting/masking longs is + * reasonably fast, making bit_buf_type be long and setting BIT_BUF_SIZE + * appropriately should be a win. Unfortunately we can't define the size + * with something like #define BIT_BUF_SIZE (sizeof(bit_buf_type)*8) + * because not all machines measure sizeof in 8-bit bytes. + */ + +typedef struct { /* Bitreading state saved across MCUs */ + bit_buf_type get_buffer; /* current bit-extraction buffer */ + int bits_left; /* # of unused bits in it */ +} bitread_perm_state; + +typedef struct { /* Bitreading working state within an MCU */ + /* Current data source location */ + /* We need a copy, rather than munging the original, in case of suspension */ + const JOCTET * next_input_byte; /* => next byte to read from source */ + size_t bytes_in_buffer; /* # of bytes remaining in source buffer */ + /* Bit input buffer --- note these values are kept in register variables, + * not in this struct, inside the inner loops. + */ + bit_buf_type get_buffer; /* current bit-extraction buffer */ + int bits_left; /* # of unused bits in it */ + /* Pointer needed by jpeg_fill_bit_buffer. */ + j_decompress_ptr cinfo; /* back link to decompress master record */ +} bitread_working_state; + +/* Macros to declare and load/save bitread local variables. */ +#define BITREAD_STATE_VARS \ + register bit_buf_type get_buffer; \ + register int bits_left; \ + bitread_working_state br_state + +#define BITREAD_LOAD_STATE(cinfop,permstate) \ + br_state.cinfo = cinfop; \ + br_state.next_input_byte = cinfop->src->next_input_byte; \ + br_state.bytes_in_buffer = cinfop->src->bytes_in_buffer; \ + get_buffer = permstate.get_buffer; \ + bits_left = permstate.bits_left; + +#define BITREAD_SAVE_STATE(cinfop,permstate) \ + cinfop->src->next_input_byte = br_state.next_input_byte; \ + cinfop->src->bytes_in_buffer = br_state.bytes_in_buffer; \ + permstate.get_buffer = get_buffer; \ + permstate.bits_left = bits_left + +/* + * These macros provide the in-line portion of bit fetching. + * Use CHECK_BIT_BUFFER to ensure there are N bits in get_buffer + * before using GET_BITS, PEEK_BITS, or DROP_BITS. + * The variables get_buffer and bits_left are assumed to be locals, + * but the state struct might not be (jpeg_huff_decode needs this). + * CHECK_BIT_BUFFER(state,n,action); + * Ensure there are N bits in get_buffer; if suspend, take action. + * val = GET_BITS(n); + * Fetch next N bits. + * val = PEEK_BITS(n); + * Fetch next N bits without removing them from the buffer. + * DROP_BITS(n); + * Discard next N bits. + * The value N should be a simple variable, not an expression, because it + * is evaluated multiple times. + */ + +#define CHECK_BIT_BUFFER(state,nbits,action) \ + { if (bits_left < (nbits)) { \ + if (! jpeg_fill_bit_buffer(&(state),get_buffer,bits_left,nbits)) \ + { action; } \ + get_buffer = (state).get_buffer; bits_left = (state).bits_left; } } + +#define GET_BITS(nbits) \ + (((int) (get_buffer >> (bits_left -= (nbits)))) & BIT_MASK(nbits)) + +#define PEEK_BITS(nbits) \ + (((int) (get_buffer >> (bits_left - (nbits)))) & BIT_MASK(nbits)) + +#define DROP_BITS(nbits) \ + (bits_left -= (nbits)) + + +/* + * Code for extracting next Huffman-coded symbol from input bit stream. + * Again, this is time-critical and we make the main paths be macros. + * + * We use a lookahead table to process codes of up to HUFF_LOOKAHEAD bits + * without looping. Usually, more than 95% of the Huffman codes will be 8 + * or fewer bits long. The few overlength codes are handled with a loop, + * which need not be inline code. + * + * Notes about the HUFF_DECODE macro: + * 1. Near the end of the data segment, we may fail to get enough bits + * for a lookahead. In that case, we do it the hard way. + * 2. If the lookahead table contains no entry, the next code must be + * more than HUFF_LOOKAHEAD bits long. + * 3. jpeg_huff_decode returns -1 if forced to suspend. + */ + +#define HUFF_DECODE(result,state,htbl,failaction,slowlabel) \ +{ register int nb, look; \ + if (bits_left < HUFF_LOOKAHEAD) { \ + if (! jpeg_fill_bit_buffer(&state,get_buffer,bits_left, 0)) {failaction;} \ + get_buffer = state.get_buffer; bits_left = state.bits_left; \ + if (bits_left < HUFF_LOOKAHEAD) { \ + nb = 1; goto slowlabel; \ + } \ + } \ + look = PEEK_BITS(HUFF_LOOKAHEAD); \ + if ((nb = htbl->look_nbits[look]) != 0) { \ + DROP_BITS(nb); \ + result = htbl->look_sym[look]; \ + } else { \ + nb = HUFF_LOOKAHEAD+1; \ +slowlabel: \ + if ((result=jpeg_huff_decode(&state,get_buffer,bits_left,htbl,nb)) < 0) \ + { failaction; } \ + get_buffer = state.get_buffer; bits_left = state.bits_left; \ + } \ +} + + +/* + * Expanded entropy decoder object for Huffman decoding. + * + * The savable_state subrecord contains fields that change within an MCU, + * but must not be updated permanently until we complete the MCU. + */ + +typedef struct { + unsigned int EOBRUN; /* remaining EOBs in EOBRUN */ + int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ +} savable_state; + +/* This macro is to work around compilers with missing or broken + * structure assignment. You'll need to fix this code if you have + * such a compiler and you change MAX_COMPS_IN_SCAN. + */ + +#ifndef NO_STRUCT_ASSIGN +#define ASSIGN_STATE(dest,src) ((dest) = (src)) +#else +#if MAX_COMPS_IN_SCAN == 4 +#define ASSIGN_STATE(dest,src) \ + ((dest).EOBRUN = (src).EOBRUN, \ + (dest).last_dc_val[0] = (src).last_dc_val[0], \ + (dest).last_dc_val[1] = (src).last_dc_val[1], \ + (dest).last_dc_val[2] = (src).last_dc_val[2], \ + (dest).last_dc_val[3] = (src).last_dc_val[3]) +#endif +#endif + + +typedef struct { + struct jpeg_entropy_decoder pub; /* public fields */ + + /* These fields are loaded into local variables at start of each MCU. + * In case of suspension, we exit WITHOUT updating them. + */ + bitread_perm_state bitstate; /* Bit buffer at start of MCU */ + savable_state saved; /* Other state at start of MCU */ + + /* These fields are NOT loaded into local working state. */ + boolean insufficient_data; /* set TRUE after emitting warning */ + unsigned int restarts_to_go; /* MCUs left in this restart interval */ + + /* Following two fields used only in progressive mode */ + + /* Pointers to derived tables (these workspaces have image lifespan) */ + d_derived_tbl * derived_tbls[NUM_HUFF_TBLS]; + + d_derived_tbl * ac_derived_tbl; /* active table during an AC scan */ + + /* Following fields used only in sequential mode */ + + /* Pointers to derived tables (these workspaces have image lifespan) */ + d_derived_tbl * dc_derived_tbls[NUM_HUFF_TBLS]; + d_derived_tbl * ac_derived_tbls[NUM_HUFF_TBLS]; + + /* Precalculated info set up by start_pass for use in decode_mcu: */ + + /* Pointers to derived tables to be used for each block within an MCU */ + d_derived_tbl * dc_cur_tbls[D_MAX_BLOCKS_IN_MCU]; + d_derived_tbl * ac_cur_tbls[D_MAX_BLOCKS_IN_MCU]; + /* Whether we care about the DC and AC coefficient values for each block */ + int coef_limit[D_MAX_BLOCKS_IN_MCU]; +} huff_entropy_decoder; + +typedef huff_entropy_decoder * huff_entropy_ptr; + + +static const int jpeg_zigzag_order[8][8] = { + { 0, 1, 5, 6, 14, 15, 27, 28 }, + { 2, 4, 7, 13, 16, 26, 29, 42 }, + { 3, 8, 12, 17, 25, 30, 41, 43 }, + { 9, 11, 18, 24, 31, 40, 44, 53 }, + { 10, 19, 23, 32, 39, 45, 52, 54 }, + { 20, 22, 33, 38, 46, 51, 55, 60 }, + { 21, 34, 37, 47, 50, 56, 59, 61 }, + { 35, 36, 48, 49, 57, 58, 62, 63 } +}; + +static const int jpeg_zigzag_order7[7][7] = { + { 0, 1, 5, 6, 14, 15, 27 }, + { 2, 4, 7, 13, 16, 26, 28 }, + { 3, 8, 12, 17, 25, 29, 38 }, + { 9, 11, 18, 24, 30, 37, 39 }, + { 10, 19, 23, 31, 36, 40, 45 }, + { 20, 22, 32, 35, 41, 44, 46 }, + { 21, 33, 34, 42, 43, 47, 48 } +}; + +static const int jpeg_zigzag_order6[6][6] = { + { 0, 1, 5, 6, 14, 15 }, + { 2, 4, 7, 13, 16, 25 }, + { 3, 8, 12, 17, 24, 26 }, + { 9, 11, 18, 23, 27, 32 }, + { 10, 19, 22, 28, 31, 33 }, + { 20, 21, 29, 30, 34, 35 } +}; + +static const int jpeg_zigzag_order5[5][5] = { + { 0, 1, 5, 6, 14 }, + { 2, 4, 7, 13, 15 }, + { 3, 8, 12, 16, 21 }, + { 9, 11, 17, 20, 22 }, + { 10, 18, 19, 23, 24 } +}; + +static const int jpeg_zigzag_order4[4][4] = { + { 0, 1, 5, 6 }, + { 2, 4, 7, 12 }, + { 3, 8, 11, 13 }, + { 9, 10, 14, 15 } +}; + +static const int jpeg_zigzag_order3[3][3] = { + { 0, 1, 5 }, + { 2, 4, 6 }, + { 3, 7, 8 } +}; + +static const int jpeg_zigzag_order2[2][2] = { + { 0, 1 }, + { 2, 3 } +}; + + +/* + * Compute the derived values for a Huffman table. + * This routine also performs some validation checks on the table. + */ + +LOCAL(void) +jpeg_make_d_derived_tbl (j_decompress_ptr cinfo, boolean isDC, int tblno, + d_derived_tbl ** pdtbl) +{ + JHUFF_TBL *htbl; + d_derived_tbl *dtbl; + int p, i, l, si, numsymbols; + int lookbits, ctr; + char huffsize[257]; + unsigned int huffcode[257]; + unsigned int code; + + /* Note that huffsize[] and huffcode[] are filled in code-length order, + * paralleling the order of the symbols themselves in htbl->huffval[]. + */ + + /* Find the input Huffman table */ + if (tblno < 0 || tblno >= NUM_HUFF_TBLS) + ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno); + htbl = + isDC ? cinfo->dc_huff_tbl_ptrs[tblno] : cinfo->ac_huff_tbl_ptrs[tblno]; + if (htbl == NULL) + ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno); + + /* Allocate a workspace if we haven't already done so. */ + if (*pdtbl == NULL) + *pdtbl = (d_derived_tbl *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(d_derived_tbl)); + dtbl = *pdtbl; + dtbl->pub = htbl; /* fill in back link */ + + /* Figure C.1: make table of Huffman code length for each symbol */ + + p = 0; + for (l = 1; l <= 16; l++) { + i = (int) htbl->bits[l]; + if (i < 0 || p + i > 256) /* protect against table overrun */ + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + while (i--) + huffsize[p++] = (char) l; + } + huffsize[p] = 0; + numsymbols = p; + + /* Figure C.2: generate the codes themselves */ + /* We also validate that the counts represent a legal Huffman code tree. */ + + code = 0; + si = huffsize[0]; + p = 0; + while (huffsize[p]) { + while (((int) huffsize[p]) == si) { + huffcode[p++] = code; + code++; + } + /* code is now 1 more than the last code used for codelength si; but + * it must still fit in si bits, since no code is allowed to be all ones. + */ + if (((INT32) code) >= (((INT32) 1) << si)) + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + code <<= 1; + si++; + } + + /* Figure F.15: generate decoding tables for bit-sequential decoding */ + + p = 0; + for (l = 1; l <= 16; l++) { + if (htbl->bits[l]) { + /* valoffset[l] = huffval[] index of 1st symbol of code length l, + * minus the minimum code of length l + */ + dtbl->valoffset[l] = (INT32) p - (INT32) huffcode[p]; + p += htbl->bits[l]; + dtbl->maxcode[l] = huffcode[p-1]; /* maximum code of length l */ + } else { + dtbl->maxcode[l] = -1; /* -1 if no codes of this length */ + } + } + dtbl->maxcode[17] = 0xFFFFFL; /* ensures jpeg_huff_decode terminates */ + + /* Compute lookahead tables to speed up decoding. + * First we set all the table entries to 0, indicating "too long"; + * then we iterate through the Huffman codes that are short enough and + * fill in all the entries that correspond to bit sequences starting + * with that code. + */ + + MEMZERO(dtbl->look_nbits, SIZEOF(dtbl->look_nbits)); + + p = 0; + for (l = 1; l <= HUFF_LOOKAHEAD; l++) { + for (i = 1; i <= (int) htbl->bits[l]; i++, p++) { + /* l = current code's length, p = its index in huffcode[] & huffval[]. */ + /* Generate left-justified code followed by all possible bit sequences */ + lookbits = huffcode[p] << (HUFF_LOOKAHEAD-l); + for (ctr = 1 << (HUFF_LOOKAHEAD-l); ctr > 0; ctr--) { + dtbl->look_nbits[lookbits] = l; + dtbl->look_sym[lookbits] = htbl->huffval[p]; + lookbits++; + } + } + } + + /* Validate symbols as being reasonable. + * For AC tables, we make no check, but accept all byte values 0..255. + * For DC tables, we require the symbols to be in range 0..15. + * (Tighter bounds could be applied depending on the data depth and mode, + * but this is sufficient to ensure safe decoding.) + */ + if (isDC) { + for (i = 0; i < numsymbols; i++) { + int sym = htbl->huffval[i]; + if (sym < 0 || sym > 15) + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + } + } +} + + +/* + * Out-of-line code for bit fetching. + * Note: current values of get_buffer and bits_left are passed as parameters, + * but are returned in the corresponding fields of the state struct. + * + * On most machines MIN_GET_BITS should be 25 to allow the full 32-bit width + * of get_buffer to be used. (On machines with wider words, an even larger + * buffer could be used.) However, on some machines 32-bit shifts are + * quite slow and take time proportional to the number of places shifted. + * (This is true with most PC compilers, for instance.) In this case it may + * be a win to set MIN_GET_BITS to the minimum value of 15. This reduces the + * average shift distance at the cost of more calls to jpeg_fill_bit_buffer. + */ + +#ifdef SLOW_SHIFT_32 +#define MIN_GET_BITS 15 /* minimum allowable value */ +#else +#define MIN_GET_BITS (BIT_BUF_SIZE-7) +#endif + + +LOCAL(boolean) +jpeg_fill_bit_buffer (bitread_working_state * state, + register bit_buf_type get_buffer, register int bits_left, + int nbits) +/* Load up the bit buffer to a depth of at least nbits */ +{ + /* Copy heavily used state fields into locals (hopefully registers) */ + register const JOCTET * next_input_byte = state->next_input_byte; + register size_t bytes_in_buffer = state->bytes_in_buffer; + j_decompress_ptr cinfo = state->cinfo; + + /* Attempt to load at least MIN_GET_BITS bits into get_buffer. */ + /* (It is assumed that no request will be for more than that many bits.) */ + /* We fail to do so only if we hit a marker or are forced to suspend. */ + + if (cinfo->unread_marker == 0) { /* cannot advance past a marker */ + while (bits_left < MIN_GET_BITS) { + register int c; + + /* Attempt to read a byte */ + if (bytes_in_buffer == 0) { + if (! (*cinfo->src->fill_input_buffer) (cinfo)) + return FALSE; + next_input_byte = cinfo->src->next_input_byte; + bytes_in_buffer = cinfo->src->bytes_in_buffer; + } + bytes_in_buffer--; + c = GETJOCTET(*next_input_byte++); + + /* If it's 0xFF, check and discard stuffed zero byte */ + if (c == 0xFF) { + /* Loop here to discard any padding FF's on terminating marker, + * so that we can save a valid unread_marker value. NOTE: we will + * accept multiple FF's followed by a 0 as meaning a single FF data + * byte. This data pattern is not valid according to the standard. + */ + do { + if (bytes_in_buffer == 0) { + if (! (*cinfo->src->fill_input_buffer) (cinfo)) + return FALSE; + next_input_byte = cinfo->src->next_input_byte; + bytes_in_buffer = cinfo->src->bytes_in_buffer; + } + bytes_in_buffer--; + c = GETJOCTET(*next_input_byte++); + } while (c == 0xFF); + + if (c == 0) { + /* Found FF/00, which represents an FF data byte */ + c = 0xFF; + } else { + /* Oops, it's actually a marker indicating end of compressed data. + * Save the marker code for later use. + * Fine point: it might appear that we should save the marker into + * bitread working state, not straight into permanent state. But + * once we have hit a marker, we cannot need to suspend within the + * current MCU, because we will read no more bytes from the data + * source. So it is OK to update permanent state right away. + */ + cinfo->unread_marker = c; + /* See if we need to insert some fake zero bits. */ + goto no_more_bytes; + } + } + + /* OK, load c into get_buffer */ + get_buffer = (get_buffer << 8) | c; + bits_left += 8; + } /* end while */ + } else { + no_more_bytes: + /* We get here if we've read the marker that terminates the compressed + * data segment. There should be enough bits in the buffer register + * to satisfy the request; if so, no problem. + */ + if (nbits > bits_left) { + /* Uh-oh. Report corrupted data to user and stuff zeroes into + * the data stream, so that we can produce some kind of image. + * We use a nonvolatile flag to ensure that only one warning message + * appears per data segment. + */ + if (! ((huff_entropy_ptr) cinfo->entropy)->insufficient_data) { + WARNMS(cinfo, JWRN_HIT_MARKER); + ((huff_entropy_ptr) cinfo->entropy)->insufficient_data = TRUE; + } + /* Fill the buffer with zero bits */ + get_buffer <<= MIN_GET_BITS - bits_left; + bits_left = MIN_GET_BITS; + } + } + + /* Unload the local registers */ + state->next_input_byte = next_input_byte; + state->bytes_in_buffer = bytes_in_buffer; + state->get_buffer = get_buffer; + state->bits_left = bits_left; + + return TRUE; +} + + +/* + * Figure F.12: extend sign bit. + * On some machines, a shift and sub will be faster than a table lookup. + */ + +#ifdef AVOID_TABLES + +#define BIT_MASK(nbits) ((1<<(nbits))-1) +#define HUFF_EXTEND(x,s) ((x) < (1<<((s)-1)) ? (x) - ((1<<(s))-1) : (x)) + +#else + +#define BIT_MASK(nbits) bmask[nbits] +#define HUFF_EXTEND(x,s) ((x) <= bmask[(s) - 1] ? (x) - bmask[s] : (x)) + +static const int bmask[16] = /* bmask[n] is mask for n rightmost bits */ + { 0, 0x0001, 0x0003, 0x0007, 0x000F, 0x001F, 0x003F, 0x007F, 0x00FF, + 0x01FF, 0x03FF, 0x07FF, 0x0FFF, 0x1FFF, 0x3FFF, 0x7FFF }; + +#endif /* AVOID_TABLES */ + + +/* + * Out-of-line code for Huffman code decoding. + */ + +LOCAL(int) +jpeg_huff_decode (bitread_working_state * state, + register bit_buf_type get_buffer, register int bits_left, + d_derived_tbl * htbl, int min_bits) +{ + register int l = min_bits; + register INT32 code; + + /* HUFF_DECODE has determined that the code is at least min_bits */ + /* bits long, so fetch that many bits in one swoop. */ + + CHECK_BIT_BUFFER(*state, l, return -1); + code = GET_BITS(l); + + /* Collect the rest of the Huffman code one bit at a time. */ + /* This is per Figure F.16 in the JPEG spec. */ + + while (code > htbl->maxcode[l]) { + code <<= 1; + CHECK_BIT_BUFFER(*state, 1, return -1); + code |= GET_BITS(1); + l++; + } + + /* Unload the local registers */ + state->get_buffer = get_buffer; + state->bits_left = bits_left; + + /* With garbage input we may reach the sentinel value l = 17. */ + + if (l > 16) { + WARNMS(state->cinfo, JWRN_HUFF_BAD_CODE); + return 0; /* fake a zero as the safest result */ + } + + return htbl->pub->huffval[ (int) (code + htbl->valoffset[l]) ]; +} + + +/* + * Finish up at the end of a Huffman-compressed scan. + */ + +METHODDEF(void) +finish_pass_huff (j_decompress_ptr cinfo) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + + /* Throw away any unused bits remaining in bit buffer; */ + /* include any full bytes in next_marker's count of discarded bytes */ + cinfo->marker->discarded_bytes += entropy->bitstate.bits_left / 8; + entropy->bitstate.bits_left = 0; +} + + +/* + * Check for a restart marker & resynchronize decoder. + * Returns FALSE if must suspend. + */ + +LOCAL(boolean) +process_restart (j_decompress_ptr cinfo) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int ci; + + finish_pass_huff(cinfo); + + /* Advance past the RSTn marker */ + if (! (*cinfo->marker->read_restart_marker) (cinfo)) + return FALSE; + + /* Re-initialize DC predictions to 0 */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) + entropy->saved.last_dc_val[ci] = 0; + /* Re-init EOB run count, too */ + entropy->saved.EOBRUN = 0; + + /* Reset restart counter */ + entropy->restarts_to_go = cinfo->restart_interval; + + /* Reset out-of-data flag, unless read_restart_marker left us smack up + * against a marker. In that case we will end up treating the next data + * segment as empty, and we can avoid producing bogus output pixels by + * leaving the flag set. + */ + if (cinfo->unread_marker == 0) + entropy->insufficient_data = FALSE; + + return TRUE; +} + + +/* + * Huffman MCU decoding. + * Each of these routines decodes and returns one MCU's worth of + * Huffman-compressed coefficients. + * The coefficients are reordered from zigzag order into natural array order, + * but are not dequantized. + * + * The i'th block of the MCU is stored into the block pointed to by + * MCU_data[i]. WE ASSUME THIS AREA IS INITIALLY ZEROED BY THE CALLER. + * (Wholesale zeroing is usually a little faster than retail...) + * + * We return FALSE if data source requested suspension. In that case no + * changes have been made to permanent state. (Exception: some output + * coefficients may already have been assigned. This is harmless for + * spectral selection, since we'll just re-assign them on the next call. + * Successive approximation AC refinement has to be more careful, however.) + */ + +/* + * MCU decoding for DC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +decode_mcu_DC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int Al = cinfo->Al; + register int s, r; + int blkn, ci; + JBLOCKROW block; + BITREAD_STATE_VARS; + savable_state state; + d_derived_tbl * tbl; + jpeg_component_info * compptr; + + /* Process restart marker if needed; may have to suspend */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (! process_restart(cinfo)) + return FALSE; + } + + /* If we've run out of data, just leave the MCU set to zeroes. + * This way, we return uniform gray for the remainder of the segment. + */ + if (! entropy->insufficient_data) { + + /* Load up working state */ + BITREAD_LOAD_STATE(cinfo,entropy->bitstate); + ASSIGN_STATE(state, entropy->saved); + + /* Outer loop handles each block in the MCU */ + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + block = MCU_data[blkn]; + ci = cinfo->MCU_membership[blkn]; + compptr = cinfo->cur_comp_info[ci]; + tbl = entropy->derived_tbls[compptr->dc_tbl_no]; + + /* Decode a single block's worth of coefficients */ + + /* Section F.2.2.1: decode the DC coefficient difference */ + HUFF_DECODE(s, br_state, tbl, return FALSE, label1); + if (s) { + CHECK_BIT_BUFFER(br_state, s, return FALSE); + r = GET_BITS(s); + s = HUFF_EXTEND(r, s); + } + + /* Convert DC difference to actual value, update last_dc_val */ + s += state.last_dc_val[ci]; + state.last_dc_val[ci] = s; + /* Scale and output the coefficient (assumes jpeg_natural_order[0]=0) */ + (*block)[0] = (JCOEF) (s << Al); + } + + /* Completed MCU, so update state */ + BITREAD_SAVE_STATE(cinfo,entropy->bitstate); + ASSIGN_STATE(entropy->saved, state); + } + + /* Account for restart interval (no-op if not using restarts) */ + entropy->restarts_to_go--; + + return TRUE; +} + + +/* + * MCU decoding for AC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +decode_mcu_AC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + register int s, k, r; + unsigned int EOBRUN; + int Se, Al; + const int * natural_order; + JBLOCKROW block; + BITREAD_STATE_VARS; + d_derived_tbl * tbl; + + /* Process restart marker if needed; may have to suspend */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (! process_restart(cinfo)) + return FALSE; + } + + /* If we've run out of data, just leave the MCU set to zeroes. + * This way, we return uniform gray for the remainder of the segment. + */ + if (! entropy->insufficient_data) { + + Se = cinfo->Se; + Al = cinfo->Al; + natural_order = cinfo->natural_order; + + /* Load up working state. + * We can avoid loading/saving bitread state if in an EOB run. + */ + EOBRUN = entropy->saved.EOBRUN; /* only part of saved state we need */ + + /* There is always only one block per MCU */ + + if (EOBRUN) /* if it's a band of zeroes... */ + EOBRUN--; /* ...process it now (we do nothing) */ + else { + BITREAD_LOAD_STATE(cinfo,entropy->bitstate); + block = MCU_data[0]; + tbl = entropy->ac_derived_tbl; + + for (k = cinfo->Ss; k <= Se; k++) { + HUFF_DECODE(s, br_state, tbl, return FALSE, label2); + r = s >> 4; + s &= 15; + if (s) { + k += r; + CHECK_BIT_BUFFER(br_state, s, return FALSE); + r = GET_BITS(s); + s = HUFF_EXTEND(r, s); + /* Scale and output coefficient in natural (dezigzagged) order */ + (*block)[natural_order[k]] = (JCOEF) (s << Al); + } else { + if (r != 15) { /* EOBr, run length is 2^r + appended bits */ + if (r) { /* EOBr, r > 0 */ + EOBRUN = 1 << r; + CHECK_BIT_BUFFER(br_state, r, return FALSE); + r = GET_BITS(r); + EOBRUN += r; + EOBRUN--; /* this band is processed at this moment */ + } + break; /* force end-of-band */ + } + k += 15; /* ZRL: skip 15 zeroes in band */ + } + } + + BITREAD_SAVE_STATE(cinfo,entropy->bitstate); + } + + /* Completed MCU, so update state */ + entropy->saved.EOBRUN = EOBRUN; /* only part of saved state we need */ + } + + /* Account for restart interval (no-op if not using restarts) */ + entropy->restarts_to_go--; + + return TRUE; +} + + +/* + * MCU decoding for DC successive approximation refinement scan. + * Note: we assume such scans can be multi-component, + * although the spec is not very clear on the point. + */ + +METHODDEF(boolean) +decode_mcu_DC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int p1, blkn; + BITREAD_STATE_VARS; + + /* Process restart marker if needed; may have to suspend */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (! process_restart(cinfo)) + return FALSE; + } + + /* Not worth the cycles to check insufficient_data here, + * since we will not change the data anyway if we read zeroes. + */ + + /* Load up working state */ + BITREAD_LOAD_STATE(cinfo,entropy->bitstate); + + p1 = 1 << cinfo->Al; /* 1 in the bit position being coded */ + + /* Outer loop handles each block in the MCU */ + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + /* Encoded data is simply the next bit of the two's-complement DC value */ + CHECK_BIT_BUFFER(br_state, 1, return FALSE); + if (GET_BITS(1)) + MCU_data[blkn][0][0] |= p1; + /* Note: since we use |=, repeating the assignment later is safe */ + } + + /* Completed MCU, so update state */ + BITREAD_SAVE_STATE(cinfo,entropy->bitstate); + + /* Account for restart interval (no-op if not using restarts) */ + entropy->restarts_to_go--; + + return TRUE; +} + + +/* + * MCU decoding for AC successive approximation refinement scan. + */ + +METHODDEF(boolean) +decode_mcu_AC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + register int s, k, r; + unsigned int EOBRUN; + int Se, p1, m1; + const int * natural_order; + JBLOCKROW block; + JCOEFPTR thiscoef; + BITREAD_STATE_VARS; + d_derived_tbl * tbl; + int num_newnz; + int newnz_pos[DCTSIZE2]; + + /* Process restart marker if needed; may have to suspend */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (! process_restart(cinfo)) + return FALSE; + } + + /* If we've run out of data, don't modify the MCU. + */ + if (! entropy->insufficient_data) { + + Se = cinfo->Se; + p1 = 1 << cinfo->Al; /* 1 in the bit position being coded */ + m1 = (-1) << cinfo->Al; /* -1 in the bit position being coded */ + natural_order = cinfo->natural_order; + + /* Load up working state */ + BITREAD_LOAD_STATE(cinfo,entropy->bitstate); + EOBRUN = entropy->saved.EOBRUN; /* only part of saved state we need */ + + /* There is always only one block per MCU */ + block = MCU_data[0]; + tbl = entropy->ac_derived_tbl; + + /* If we are forced to suspend, we must undo the assignments to any newly + * nonzero coefficients in the block, because otherwise we'd get confused + * next time about which coefficients were already nonzero. + * But we need not undo addition of bits to already-nonzero coefficients; + * instead, we can test the current bit to see if we already did it. + */ + num_newnz = 0; + + /* initialize coefficient loop counter to start of band */ + k = cinfo->Ss; + + if (EOBRUN == 0) { + do { + HUFF_DECODE(s, br_state, tbl, goto undoit, label3); + r = s >> 4; + s &= 15; + if (s) { + if (s != 1) /* size of new coef should always be 1 */ + WARNMS(cinfo, JWRN_HUFF_BAD_CODE); + CHECK_BIT_BUFFER(br_state, 1, goto undoit); + if (GET_BITS(1)) + s = p1; /* newly nonzero coef is positive */ + else + s = m1; /* newly nonzero coef is negative */ + } else { + if (r != 15) { + EOBRUN = 1 << r; /* EOBr, run length is 2^r + appended bits */ + if (r) { + CHECK_BIT_BUFFER(br_state, r, goto undoit); + r = GET_BITS(r); + EOBRUN += r; + } + break; /* rest of block is handled by EOB logic */ + } + /* note s = 0 for processing ZRL */ + } + /* Advance over already-nonzero coefs and r still-zero coefs, + * appending correction bits to the nonzeroes. A correction bit is 1 + * if the absolute value of the coefficient must be increased. + */ + do { + thiscoef = *block + natural_order[k]; + if (*thiscoef) { + CHECK_BIT_BUFFER(br_state, 1, goto undoit); + if (GET_BITS(1)) { + if ((*thiscoef & p1) == 0) { /* do nothing if already set it */ + if (*thiscoef >= 0) + *thiscoef += p1; + else + *thiscoef += m1; + } + } + } else { + if (--r < 0) + break; /* reached target zero coefficient */ + } + k++; + } while (k <= Se); + if (s) { + int pos = natural_order[k]; + /* Output newly nonzero coefficient */ + (*block)[pos] = (JCOEF) s; + /* Remember its position in case we have to suspend */ + newnz_pos[num_newnz++] = pos; + } + k++; + } while (k <= Se); + } + + if (EOBRUN) { + /* Scan any remaining coefficient positions after the end-of-band + * (the last newly nonzero coefficient, if any). Append a correction + * bit to each already-nonzero coefficient. A correction bit is 1 + * if the absolute value of the coefficient must be increased. + */ + do { + thiscoef = *block + natural_order[k]; + if (*thiscoef) { + CHECK_BIT_BUFFER(br_state, 1, goto undoit); + if (GET_BITS(1)) { + if ((*thiscoef & p1) == 0) { /* do nothing if already changed it */ + if (*thiscoef >= 0) + *thiscoef += p1; + else + *thiscoef += m1; + } + } + } + k++; + } while (k <= Se); + /* Count one block completed in EOB run */ + EOBRUN--; + } + + /* Completed MCU, so update state */ + BITREAD_SAVE_STATE(cinfo,entropy->bitstate); + entropy->saved.EOBRUN = EOBRUN; /* only part of saved state we need */ + } + + /* Account for restart interval (no-op if not using restarts) */ + entropy->restarts_to_go--; + + return TRUE; + +undoit: + /* Re-zero any output coefficients that we made newly nonzero */ + while (num_newnz) + (*block)[newnz_pos[--num_newnz]] = 0; + + return FALSE; +} + + +/* + * Decode one MCU's worth of Huffman-compressed coefficients, + * partial blocks. + */ + +METHODDEF(boolean) +decode_mcu_sub (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + const int * natural_order; + int Se, blkn; + BITREAD_STATE_VARS; + savable_state state; + + /* Process restart marker if needed; may have to suspend */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (! process_restart(cinfo)) + return FALSE; + } + + /* If we've run out of data, just leave the MCU set to zeroes. + * This way, we return uniform gray for the remainder of the segment. + */ + if (! entropy->insufficient_data) { + + natural_order = cinfo->natural_order; + Se = cinfo->lim_Se; + + /* Load up working state */ + BITREAD_LOAD_STATE(cinfo,entropy->bitstate); + ASSIGN_STATE(state, entropy->saved); + + /* Outer loop handles each block in the MCU */ + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + JBLOCKROW block = MCU_data[blkn]; + d_derived_tbl * htbl; + register int s, k, r; + int coef_limit, ci; + + /* Decode a single block's worth of coefficients */ + + /* Section F.2.2.1: decode the DC coefficient difference */ + htbl = entropy->dc_cur_tbls[blkn]; + HUFF_DECODE(s, br_state, htbl, return FALSE, label1); + + htbl = entropy->ac_cur_tbls[blkn]; + k = 1; + coef_limit = entropy->coef_limit[blkn]; + if (coef_limit) { + /* Convert DC difference to actual value, update last_dc_val */ + if (s) { + CHECK_BIT_BUFFER(br_state, s, return FALSE); + r = GET_BITS(s); + s = HUFF_EXTEND(r, s); + } + ci = cinfo->MCU_membership[blkn]; + s += state.last_dc_val[ci]; + state.last_dc_val[ci] = s; + /* Output the DC coefficient */ + (*block)[0] = (JCOEF) s; + + /* Section F.2.2.2: decode the AC coefficients */ + /* Since zeroes are skipped, output area must be cleared beforehand */ + for (; k < coef_limit; k++) { + HUFF_DECODE(s, br_state, htbl, return FALSE, label2); + + r = s >> 4; + s &= 15; + + if (s) { + k += r; + CHECK_BIT_BUFFER(br_state, s, return FALSE); + r = GET_BITS(s); + s = HUFF_EXTEND(r, s); + /* Output coefficient in natural (dezigzagged) order. + * Note: the extra entries in natural_order[] will save us + * if k > Se, which could happen if the data is corrupted. + */ + (*block)[natural_order[k]] = (JCOEF) s; + } else { + if (r != 15) + goto EndOfBlock; + k += 15; + } + } + } else { + if (s) { + CHECK_BIT_BUFFER(br_state, s, return FALSE); + DROP_BITS(s); + } + } + + /* Section F.2.2.2: decode the AC coefficients */ + /* In this path we just discard the values */ + for (; k <= Se; k++) { + HUFF_DECODE(s, br_state, htbl, return FALSE, label3); + + r = s >> 4; + s &= 15; + + if (s) { + k += r; + CHECK_BIT_BUFFER(br_state, s, return FALSE); + DROP_BITS(s); + } else { + if (r != 15) + break; + k += 15; + } + } + + EndOfBlock: ; + } + + /* Completed MCU, so update state */ + BITREAD_SAVE_STATE(cinfo,entropy->bitstate); + ASSIGN_STATE(entropy->saved, state); + } + + /* Account for restart interval (no-op if not using restarts) */ + entropy->restarts_to_go--; + + return TRUE; +} + + +/* + * Decode one MCU's worth of Huffman-compressed coefficients, + * full-size blocks. + */ + +METHODDEF(boolean) +decode_mcu (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int blkn; + BITREAD_STATE_VARS; + savable_state state; + + /* Process restart marker if needed; may have to suspend */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (! process_restart(cinfo)) + return FALSE; + } + + /* If we've run out of data, just leave the MCU set to zeroes. + * This way, we return uniform gray for the remainder of the segment. + */ + if (! entropy->insufficient_data) { + + /* Load up working state */ + BITREAD_LOAD_STATE(cinfo,entropy->bitstate); + ASSIGN_STATE(state, entropy->saved); + + /* Outer loop handles each block in the MCU */ + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + JBLOCKROW block = MCU_data[blkn]; + d_derived_tbl * htbl; + register int s, k, r; + int coef_limit, ci; + + /* Decode a single block's worth of coefficients */ + + /* Section F.2.2.1: decode the DC coefficient difference */ + htbl = entropy->dc_cur_tbls[blkn]; + HUFF_DECODE(s, br_state, htbl, return FALSE, label1); + + htbl = entropy->ac_cur_tbls[blkn]; + k = 1; + coef_limit = entropy->coef_limit[blkn]; + if (coef_limit) { + /* Convert DC difference to actual value, update last_dc_val */ + if (s) { + CHECK_BIT_BUFFER(br_state, s, return FALSE); + r = GET_BITS(s); + s = HUFF_EXTEND(r, s); + } + ci = cinfo->MCU_membership[blkn]; + s += state.last_dc_val[ci]; + state.last_dc_val[ci] = s; + /* Output the DC coefficient */ + (*block)[0] = (JCOEF) s; + + /* Section F.2.2.2: decode the AC coefficients */ + /* Since zeroes are skipped, output area must be cleared beforehand */ + for (; k < coef_limit; k++) { + HUFF_DECODE(s, br_state, htbl, return FALSE, label2); + + r = s >> 4; + s &= 15; + + if (s) { + k += r; + CHECK_BIT_BUFFER(br_state, s, return FALSE); + r = GET_BITS(s); + s = HUFF_EXTEND(r, s); + /* Output coefficient in natural (dezigzagged) order. + * Note: the extra entries in jpeg_natural_order[] will save us + * if k >= DCTSIZE2, which could happen if the data is corrupted. + */ + (*block)[jpeg_natural_order[k]] = (JCOEF) s; + } else { + if (r != 15) + goto EndOfBlock; + k += 15; + } + } + } else { + if (s) { + CHECK_BIT_BUFFER(br_state, s, return FALSE); + DROP_BITS(s); + } + } + + /* Section F.2.2.2: decode the AC coefficients */ + /* In this path we just discard the values */ + for (; k < DCTSIZE2; k++) { + HUFF_DECODE(s, br_state, htbl, return FALSE, label3); + + r = s >> 4; + s &= 15; + + if (s) { + k += r; + CHECK_BIT_BUFFER(br_state, s, return FALSE); + DROP_BITS(s); + } else { + if (r != 15) + break; + k += 15; + } + } + + EndOfBlock: ; + } + + /* Completed MCU, so update state */ + BITREAD_SAVE_STATE(cinfo,entropy->bitstate); + ASSIGN_STATE(entropy->saved, state); + } + + /* Account for restart interval (no-op if not using restarts) */ + entropy->restarts_to_go--; + + return TRUE; +} + + +/* + * Initialize for a Huffman-compressed scan. + */ + +METHODDEF(void) +start_pass_huff_decoder (j_decompress_ptr cinfo) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int ci, blkn, tbl, i; + jpeg_component_info * compptr; + + if (cinfo->progressive_mode) { + /* Validate progressive scan parameters */ + if (cinfo->Ss == 0) { + if (cinfo->Se != 0) + goto bad; + } else { + /* need not check Ss/Se < 0 since they came from unsigned bytes */ + if (cinfo->Se < cinfo->Ss || cinfo->Se > cinfo->lim_Se) + goto bad; + /* AC scans may have only one component */ + if (cinfo->comps_in_scan != 1) + goto bad; + } + if (cinfo->Ah != 0) { + /* Successive approximation refinement scan: must have Al = Ah-1. */ + if (cinfo->Ah-1 != cinfo->Al) + goto bad; + } + if (cinfo->Al > 13) { /* need not check for < 0 */ + /* Arguably the maximum Al value should be less than 13 for 8-bit precision, + * but the spec doesn't say so, and we try to be liberal about what we + * accept. Note: large Al values could result in out-of-range DC + * coefficients during early scans, leading to bizarre displays due to + * overflows in the IDCT math. But we won't crash. + */ + bad: + ERREXIT4(cinfo, JERR_BAD_PROGRESSION, + cinfo->Ss, cinfo->Se, cinfo->Ah, cinfo->Al); + } + /* Update progression status, and verify that scan order is legal. + * Note that inter-scan inconsistencies are treated as warnings + * not fatal errors ... not clear if this is right way to behave. + */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + int coefi, cindex = cinfo->cur_comp_info[ci]->component_index; + int *coef_bit_ptr = & cinfo->coef_bits[cindex][0]; + if (cinfo->Ss && coef_bit_ptr[0] < 0) /* AC without prior DC scan */ + WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, 0); + for (coefi = cinfo->Ss; coefi <= cinfo->Se; coefi++) { + int expected = (coef_bit_ptr[coefi] < 0) ? 0 : coef_bit_ptr[coefi]; + if (cinfo->Ah != expected) + WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, coefi); + coef_bit_ptr[coefi] = cinfo->Al; + } + } + + /* Select MCU decoding routine */ + if (cinfo->Ah == 0) { + if (cinfo->Ss == 0) + entropy->pub.decode_mcu = decode_mcu_DC_first; + else + entropy->pub.decode_mcu = decode_mcu_AC_first; + } else { + if (cinfo->Ss == 0) + entropy->pub.decode_mcu = decode_mcu_DC_refine; + else + entropy->pub.decode_mcu = decode_mcu_AC_refine; + } + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* Make sure requested tables are present, and compute derived tables. + * We may build same derived table more than once, but it's not expensive. + */ + if (cinfo->Ss == 0) { + if (cinfo->Ah == 0) { /* DC refinement needs no table */ + tbl = compptr->dc_tbl_no; + jpeg_make_d_derived_tbl(cinfo, TRUE, tbl, + & entropy->derived_tbls[tbl]); + } + } else { + tbl = compptr->ac_tbl_no; + jpeg_make_d_derived_tbl(cinfo, FALSE, tbl, + & entropy->derived_tbls[tbl]); + /* remember the single active table */ + entropy->ac_derived_tbl = entropy->derived_tbls[tbl]; + } + /* Initialize DC predictions to 0 */ + entropy->saved.last_dc_val[ci] = 0; + } + + /* Initialize private state variables */ + entropy->saved.EOBRUN = 0; + } else { + /* Check that the scan parameters Ss, Se, Ah/Al are OK for sequential JPEG. + * This ought to be an error condition, but we make it a warning because + * there are some baseline files out there with all zeroes in these bytes. + */ + if (cinfo->Ss != 0 || cinfo->Ah != 0 || cinfo->Al != 0 || + ((cinfo->is_baseline || cinfo->Se < DCTSIZE2) && + cinfo->Se != cinfo->lim_Se)) + WARNMS(cinfo, JWRN_NOT_SEQUENTIAL); + + /* Select MCU decoding routine */ + /* We retain the hard-coded case for full-size blocks. + * This is not necessary, but it appears that this version is slightly + * more performant in the given implementation. + * With an improved implementation we would prefer a single optimized + * function. + */ + if (cinfo->lim_Se != DCTSIZE2-1) + entropy->pub.decode_mcu = decode_mcu_sub; + else + entropy->pub.decode_mcu = decode_mcu; + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* Compute derived values for Huffman tables */ + /* We may do this more than once for a table, but it's not expensive */ + tbl = compptr->dc_tbl_no; + jpeg_make_d_derived_tbl(cinfo, TRUE, tbl, + & entropy->dc_derived_tbls[tbl]); + if (cinfo->lim_Se) { /* AC needs no table when not present */ + tbl = compptr->ac_tbl_no; + jpeg_make_d_derived_tbl(cinfo, FALSE, tbl, + & entropy->ac_derived_tbls[tbl]); + } + /* Initialize DC predictions to 0 */ + entropy->saved.last_dc_val[ci] = 0; + } + + /* Precalculate decoding info for each block in an MCU of this scan */ + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + ci = cinfo->MCU_membership[blkn]; + compptr = cinfo->cur_comp_info[ci]; + /* Precalculate which table to use for each block */ + entropy->dc_cur_tbls[blkn] = entropy->dc_derived_tbls[compptr->dc_tbl_no]; + entropy->ac_cur_tbls[blkn] = entropy->ac_derived_tbls[compptr->ac_tbl_no]; + /* Decide whether we really care about the coefficient values */ + if (compptr->component_needed) { + ci = compptr->DCT_v_scaled_size; + i = compptr->DCT_h_scaled_size; + switch (cinfo->lim_Se) { + case (1*1-1): + entropy->coef_limit[blkn] = 1; + break; + case (2*2-1): + if (ci <= 0 || ci > 2) ci = 2; + if (i <= 0 || i > 2) i = 2; + entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order2[ci - 1][i - 1]; + break; + case (3*3-1): + if (ci <= 0 || ci > 3) ci = 3; + if (i <= 0 || i > 3) i = 3; + entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order3[ci - 1][i - 1]; + break; + case (4*4-1): + if (ci <= 0 || ci > 4) ci = 4; + if (i <= 0 || i > 4) i = 4; + entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order4[ci - 1][i - 1]; + break; + case (5*5-1): + if (ci <= 0 || ci > 5) ci = 5; + if (i <= 0 || i > 5) i = 5; + entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order5[ci - 1][i - 1]; + break; + case (6*6-1): + if (ci <= 0 || ci > 6) ci = 6; + if (i <= 0 || i > 6) i = 6; + entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order6[ci - 1][i - 1]; + break; + case (7*7-1): + if (ci <= 0 || ci > 7) ci = 7; + if (i <= 0 || i > 7) i = 7; + entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order7[ci - 1][i - 1]; + break; + default: + if (ci <= 0 || ci > 8) ci = 8; + if (i <= 0 || i > 8) i = 8; + entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order[ci - 1][i - 1]; + break; + } + } else { + entropy->coef_limit[blkn] = 0; + } + } + } + + /* Initialize bitread state variables */ + entropy->bitstate.bits_left = 0; + entropy->bitstate.get_buffer = 0; /* unnecessary, but keeps Purify quiet */ + entropy->insufficient_data = FALSE; + + /* Initialize restart counter */ + entropy->restarts_to_go = cinfo->restart_interval; +} + + +/* + * Module initialization routine for Huffman entropy decoding. + */ + +GLOBAL(void) +jinit_huff_decoder (j_decompress_ptr cinfo) +{ + huff_entropy_ptr entropy; + int i; + + entropy = (huff_entropy_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(huff_entropy_decoder)); + cinfo->entropy = &entropy->pub; + entropy->pub.start_pass = start_pass_huff_decoder; + entropy->pub.finish_pass = finish_pass_huff; + + if (cinfo->progressive_mode) { + /* Create progression status table */ + int *coef_bit_ptr, ci; + cinfo->coef_bits = (int (*)[DCTSIZE2]) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + cinfo->num_components*DCTSIZE2*SIZEOF(int)); + coef_bit_ptr = & cinfo->coef_bits[0][0]; + for (ci = 0; ci < cinfo->num_components; ci++) + for (i = 0; i < DCTSIZE2; i++) + *coef_bit_ptr++ = -1; + + /* Mark derived tables unallocated */ + for (i = 0; i < NUM_HUFF_TBLS; i++) { + entropy->derived_tbls[i] = NULL; + } + } else { + /* Mark tables unallocated */ + for (i = 0; i < NUM_HUFF_TBLS; i++) { + entropy->dc_derived_tbls[i] = entropy->ac_derived_tbls[i] = NULL; + } + } +} diff --git a/compat/libjpeg/jdinput.c b/compat/libjpeg/jdinput.c new file mode 100755 index 0000000..80bdef5 --- /dev/null +++ b/compat/libjpeg/jdinput.c @@ -0,0 +1,662 @@ +/* + * jdinput.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 2002-2013 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains input control logic for the JPEG decompressor. + * These routines are concerned with controlling the decompressor's input + * processing (marker reading and coefficient decoding). The actual input + * reading is done in jdmarker.c, jdhuff.c, and jdarith.c. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Private state */ + +typedef struct { + struct jpeg_input_controller pub; /* public fields */ + + int inheaders; /* Nonzero until first SOS is reached */ +} my_input_controller; + +typedef my_input_controller * my_inputctl_ptr; + + +/* Forward declarations */ +METHODDEF(int) consume_markers JPP((j_decompress_ptr cinfo)); + + +/* + * Routines to calculate various quantities related to the size of the image. + */ + + +/* + * Compute output image dimensions and related values. + * NOTE: this is exported for possible use by application. + * Hence it mustn't do anything that can't be done twice. + */ + +GLOBAL(void) +jpeg_core_output_dimensions (j_decompress_ptr cinfo) +/* Do computations that are needed before master selection phase. + * This function is used for transcoding and full decompression. + */ +{ +#ifdef IDCT_SCALING_SUPPORTED + int ci; + jpeg_component_info *compptr; + + /* Compute actual output image dimensions and DCT scaling choices. */ + if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom) { + /* Provide 1/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 1; + cinfo->min_DCT_v_scaled_size = 1; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 2) { + /* Provide 2/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 2L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 2L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 2; + cinfo->min_DCT_v_scaled_size = 2; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 3) { + /* Provide 3/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 3L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 3L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 3; + cinfo->min_DCT_v_scaled_size = 3; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 4) { + /* Provide 4/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 4L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 4L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 4; + cinfo->min_DCT_v_scaled_size = 4; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 5) { + /* Provide 5/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 5L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 5L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 5; + cinfo->min_DCT_v_scaled_size = 5; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 6) { + /* Provide 6/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 6L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 6L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 6; + cinfo->min_DCT_v_scaled_size = 6; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 7) { + /* Provide 7/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 7L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 7L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 7; + cinfo->min_DCT_v_scaled_size = 7; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 8) { + /* Provide 8/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 8L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 8L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 8; + cinfo->min_DCT_v_scaled_size = 8; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 9) { + /* Provide 9/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 9L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 9L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 9; + cinfo->min_DCT_v_scaled_size = 9; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 10) { + /* Provide 10/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 10L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 10L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 10; + cinfo->min_DCT_v_scaled_size = 10; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 11) { + /* Provide 11/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 11L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 11L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 11; + cinfo->min_DCT_v_scaled_size = 11; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 12) { + /* Provide 12/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 12L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 12L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 12; + cinfo->min_DCT_v_scaled_size = 12; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 13) { + /* Provide 13/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 13L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 13L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 13; + cinfo->min_DCT_v_scaled_size = 13; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 14) { + /* Provide 14/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 14L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 14L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 14; + cinfo->min_DCT_v_scaled_size = 14; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 15) { + /* Provide 15/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 15L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 15L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 15; + cinfo->min_DCT_v_scaled_size = 15; + } else { + /* Provide 16/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 16L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 16L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 16; + cinfo->min_DCT_v_scaled_size = 16; + } + + /* Recompute dimensions of components */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + compptr->DCT_h_scaled_size = cinfo->min_DCT_h_scaled_size; + compptr->DCT_v_scaled_size = cinfo->min_DCT_v_scaled_size; + } + +#else /* !IDCT_SCALING_SUPPORTED */ + + /* Hardwire it to "no scaling" */ + cinfo->output_width = cinfo->image_width; + cinfo->output_height = cinfo->image_height; + /* initial_setup has already initialized DCT_scaled_size, + * and has computed unscaled downsampled_width and downsampled_height. + */ + +#endif /* IDCT_SCALING_SUPPORTED */ +} + + +LOCAL(void) +initial_setup (j_decompress_ptr cinfo) +/* Called once, when first SOS marker is reached */ +{ + int ci; + jpeg_component_info *compptr; + + /* Make sure image isn't bigger than I can handle */ + if ((long) cinfo->image_height > (long) JPEG_MAX_DIMENSION || + (long) cinfo->image_width > (long) JPEG_MAX_DIMENSION) + ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION); + + /* Only 8 to 12 bits data precision are supported for DCT based JPEG */ + if (cinfo->data_precision < 8 || cinfo->data_precision > 12) + ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision); + + /* Check that number of components won't exceed internal array sizes */ + if (cinfo->num_components > MAX_COMPONENTS) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, + MAX_COMPONENTS); + + /* Compute maximum sampling factors; check factor validity */ + cinfo->max_h_samp_factor = 1; + cinfo->max_v_samp_factor = 1; + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + if (compptr->h_samp_factor<=0 || compptr->h_samp_factor>MAX_SAMP_FACTOR || + compptr->v_samp_factor<=0 || compptr->v_samp_factor>MAX_SAMP_FACTOR) + ERREXIT(cinfo, JERR_BAD_SAMPLING); + cinfo->max_h_samp_factor = MAX(cinfo->max_h_samp_factor, + compptr->h_samp_factor); + cinfo->max_v_samp_factor = MAX(cinfo->max_v_samp_factor, + compptr->v_samp_factor); + } + + /* Derive block_size, natural_order, and lim_Se */ + if (cinfo->is_baseline || (cinfo->progressive_mode && + cinfo->comps_in_scan)) { /* no pseudo SOS marker */ + cinfo->block_size = DCTSIZE; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + } else + switch (cinfo->Se) { + case (1*1-1): + cinfo->block_size = 1; + cinfo->natural_order = jpeg_natural_order; /* not needed */ + cinfo->lim_Se = cinfo->Se; + break; + case (2*2-1): + cinfo->block_size = 2; + cinfo->natural_order = jpeg_natural_order2; + cinfo->lim_Se = cinfo->Se; + break; + case (3*3-1): + cinfo->block_size = 3; + cinfo->natural_order = jpeg_natural_order3; + cinfo->lim_Se = cinfo->Se; + break; + case (4*4-1): + cinfo->block_size = 4; + cinfo->natural_order = jpeg_natural_order4; + cinfo->lim_Se = cinfo->Se; + break; + case (5*5-1): + cinfo->block_size = 5; + cinfo->natural_order = jpeg_natural_order5; + cinfo->lim_Se = cinfo->Se; + break; + case (6*6-1): + cinfo->block_size = 6; + cinfo->natural_order = jpeg_natural_order6; + cinfo->lim_Se = cinfo->Se; + break; + case (7*7-1): + cinfo->block_size = 7; + cinfo->natural_order = jpeg_natural_order7; + cinfo->lim_Se = cinfo->Se; + break; + case (8*8-1): + cinfo->block_size = 8; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + break; + case (9*9-1): + cinfo->block_size = 9; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + break; + case (10*10-1): + cinfo->block_size = 10; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + break; + case (11*11-1): + cinfo->block_size = 11; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + break; + case (12*12-1): + cinfo->block_size = 12; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + break; + case (13*13-1): + cinfo->block_size = 13; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + break; + case (14*14-1): + cinfo->block_size = 14; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + break; + case (15*15-1): + cinfo->block_size = 15; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + break; + case (16*16-1): + cinfo->block_size = 16; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + break; + default: + ERREXIT4(cinfo, JERR_BAD_PROGRESSION, + cinfo->Ss, cinfo->Se, cinfo->Ah, cinfo->Al); + break; + } + + /* We initialize DCT_scaled_size and min_DCT_scaled_size to block_size. + * In the full decompressor, + * this will be overridden by jpeg_calc_output_dimensions in jdmaster.c; + * but in the transcoder, + * jpeg_calc_output_dimensions is not used, so we must do it here. + */ + cinfo->min_DCT_h_scaled_size = cinfo->block_size; + cinfo->min_DCT_v_scaled_size = cinfo->block_size; + + /* Compute dimensions of components */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + compptr->DCT_h_scaled_size = cinfo->block_size; + compptr->DCT_v_scaled_size = cinfo->block_size; + /* Size in DCT blocks */ + compptr->width_in_blocks = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor, + (long) (cinfo->max_h_samp_factor * cinfo->block_size)); + compptr->height_in_blocks = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor, + (long) (cinfo->max_v_samp_factor * cinfo->block_size)); + /* downsampled_width and downsampled_height will also be overridden by + * jdmaster.c if we are doing full decompression. The transcoder library + * doesn't use these values, but the calling application might. + */ + /* Size in samples */ + compptr->downsampled_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor, + (long) cinfo->max_h_samp_factor); + compptr->downsampled_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor, + (long) cinfo->max_v_samp_factor); + /* Mark component needed, until color conversion says otherwise */ + compptr->component_needed = TRUE; + /* Mark no quantization table yet saved for component */ + compptr->quant_table = NULL; + } + + /* Compute number of fully interleaved MCU rows. */ + cinfo->total_iMCU_rows = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height, + (long) (cinfo->max_v_samp_factor * cinfo->block_size)); + + /* Decide whether file contains multiple scans */ + if (cinfo->comps_in_scan < cinfo->num_components || cinfo->progressive_mode) + cinfo->inputctl->has_multiple_scans = TRUE; + else + cinfo->inputctl->has_multiple_scans = FALSE; +} + + +LOCAL(void) +per_scan_setup (j_decompress_ptr cinfo) +/* Do computations that are needed before processing a JPEG scan */ +/* cinfo->comps_in_scan and cinfo->cur_comp_info[] were set from SOS marker */ +{ + int ci, mcublks, tmp; + jpeg_component_info *compptr; + + if (cinfo->comps_in_scan == 1) { + + /* Noninterleaved (single-component) scan */ + compptr = cinfo->cur_comp_info[0]; + + /* Overall image size in MCUs */ + cinfo->MCUs_per_row = compptr->width_in_blocks; + cinfo->MCU_rows_in_scan = compptr->height_in_blocks; + + /* For noninterleaved scan, always one block per MCU */ + compptr->MCU_width = 1; + compptr->MCU_height = 1; + compptr->MCU_blocks = 1; + compptr->MCU_sample_width = compptr->DCT_h_scaled_size; + compptr->last_col_width = 1; + /* For noninterleaved scans, it is convenient to define last_row_height + * as the number of block rows present in the last iMCU row. + */ + tmp = (int) (compptr->height_in_blocks % compptr->v_samp_factor); + if (tmp == 0) tmp = compptr->v_samp_factor; + compptr->last_row_height = tmp; + + /* Prepare array describing MCU composition */ + cinfo->blocks_in_MCU = 1; + cinfo->MCU_membership[0] = 0; + + } else { + + /* Interleaved (multi-component) scan */ + if (cinfo->comps_in_scan <= 0 || cinfo->comps_in_scan > MAX_COMPS_IN_SCAN) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->comps_in_scan, + MAX_COMPS_IN_SCAN); + + /* Overall image size in MCUs */ + cinfo->MCUs_per_row = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width, + (long) (cinfo->max_h_samp_factor * cinfo->block_size)); + cinfo->MCU_rows_in_scan = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height, + (long) (cinfo->max_v_samp_factor * cinfo->block_size)); + + cinfo->blocks_in_MCU = 0; + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* Sampling factors give # of blocks of component in each MCU */ + compptr->MCU_width = compptr->h_samp_factor; + compptr->MCU_height = compptr->v_samp_factor; + compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height; + compptr->MCU_sample_width = compptr->MCU_width * compptr->DCT_h_scaled_size; + /* Figure number of non-dummy blocks in last MCU column & row */ + tmp = (int) (compptr->width_in_blocks % compptr->MCU_width); + if (tmp == 0) tmp = compptr->MCU_width; + compptr->last_col_width = tmp; + tmp = (int) (compptr->height_in_blocks % compptr->MCU_height); + if (tmp == 0) tmp = compptr->MCU_height; + compptr->last_row_height = tmp; + /* Prepare array describing MCU composition */ + mcublks = compptr->MCU_blocks; + if (cinfo->blocks_in_MCU + mcublks > D_MAX_BLOCKS_IN_MCU) + ERREXIT(cinfo, JERR_BAD_MCU_SIZE); + while (mcublks-- > 0) { + cinfo->MCU_membership[cinfo->blocks_in_MCU++] = ci; + } + } + + } +} + + +/* + * Save away a copy of the Q-table referenced by each component present + * in the current scan, unless already saved during a prior scan. + * + * In a multiple-scan JPEG file, the encoder could assign different components + * the same Q-table slot number, but change table definitions between scans + * so that each component uses a different Q-table. (The IJG encoder is not + * currently capable of doing this, but other encoders might.) Since we want + * to be able to dequantize all the components at the end of the file, this + * means that we have to save away the table actually used for each component. + * We do this by copying the table at the start of the first scan containing + * the component. + * The JPEG spec prohibits the encoder from changing the contents of a Q-table + * slot between scans of a component using that slot. If the encoder does so + * anyway, this decoder will simply use the Q-table values that were current + * at the start of the first scan for the component. + * + * The decompressor output side looks only at the saved quant tables, + * not at the current Q-table slots. + */ + +LOCAL(void) +latch_quant_tables (j_decompress_ptr cinfo) +{ + int ci, qtblno; + jpeg_component_info *compptr; + JQUANT_TBL * qtbl; + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* No work if we already saved Q-table for this component */ + if (compptr->quant_table != NULL) + continue; + /* Make sure specified quantization table is present */ + qtblno = compptr->quant_tbl_no; + if (qtblno < 0 || qtblno >= NUM_QUANT_TBLS || + cinfo->quant_tbl_ptrs[qtblno] == NULL) + ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, qtblno); + /* OK, save away the quantization table */ + qtbl = (JQUANT_TBL *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(JQUANT_TBL)); + MEMCOPY(qtbl, cinfo->quant_tbl_ptrs[qtblno], SIZEOF(JQUANT_TBL)); + compptr->quant_table = qtbl; + } +} + + +/* + * Initialize the input modules to read a scan of compressed data. + * The first call to this is done by jdmaster.c after initializing + * the entire decompressor (during jpeg_start_decompress). + * Subsequent calls come from consume_markers, below. + */ + +METHODDEF(void) +start_input_pass (j_decompress_ptr cinfo) +{ + per_scan_setup(cinfo); + latch_quant_tables(cinfo); + (*cinfo->entropy->start_pass) (cinfo); + (*cinfo->coef->start_input_pass) (cinfo); + cinfo->inputctl->consume_input = cinfo->coef->consume_data; +} + + +/* + * Finish up after inputting a compressed-data scan. + * This is called by the coefficient controller after it's read all + * the expected data of the scan. + */ + +METHODDEF(void) +finish_input_pass (j_decompress_ptr cinfo) +{ + (*cinfo->entropy->finish_pass) (cinfo); + cinfo->inputctl->consume_input = consume_markers; +} + + +/* + * Read JPEG markers before, between, or after compressed-data scans. + * Change state as necessary when a new scan is reached. + * Return value is JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI. + * + * The consume_input method pointer points either here or to the + * coefficient controller's consume_data routine, depending on whether + * we are reading a compressed data segment or inter-segment markers. + * + * Note: This function should NOT return a pseudo SOS marker (with zero + * component number) to the caller. A pseudo marker received by + * read_markers is processed and then skipped for other markers. + */ + +METHODDEF(int) +consume_markers (j_decompress_ptr cinfo) +{ + my_inputctl_ptr inputctl = (my_inputctl_ptr) cinfo->inputctl; + int val; + + if (inputctl->pub.eoi_reached) /* After hitting EOI, read no further */ + return JPEG_REACHED_EOI; + + for (;;) { /* Loop to pass pseudo SOS marker */ + val = (*cinfo->marker->read_markers) (cinfo); + + switch (val) { + case JPEG_REACHED_SOS: /* Found SOS */ + if (inputctl->inheaders) { /* 1st SOS */ + if (inputctl->inheaders == 1) + initial_setup(cinfo); + if (cinfo->comps_in_scan == 0) { /* pseudo SOS marker */ + inputctl->inheaders = 2; + break; + } + inputctl->inheaders = 0; + /* Note: start_input_pass must be called by jdmaster.c + * before any more input can be consumed. jdapimin.c is + * responsible for enforcing this sequencing. + */ + } else { /* 2nd or later SOS marker */ + if (! inputctl->pub.has_multiple_scans) + ERREXIT(cinfo, JERR_EOI_EXPECTED); /* Oops, I wasn't expecting this! */ + if (cinfo->comps_in_scan == 0) /* unexpected pseudo SOS marker */ + break; + start_input_pass(cinfo); + } + return val; + case JPEG_REACHED_EOI: /* Found EOI */ + inputctl->pub.eoi_reached = TRUE; + if (inputctl->inheaders) { /* Tables-only datastream, apparently */ + if (cinfo->marker->saw_SOF) + ERREXIT(cinfo, JERR_SOF_NO_SOS); + } else { + /* Prevent infinite loop in coef ctlr's decompress_data routine + * if user set output_scan_number larger than number of scans. + */ + if (cinfo->output_scan_number > cinfo->input_scan_number) + cinfo->output_scan_number = cinfo->input_scan_number; + } + return val; + case JPEG_SUSPENDED: + return val; + default: + return val; + } + } +} + + +/* + * Reset state to begin a fresh datastream. + */ + +METHODDEF(void) +reset_input_controller (j_decompress_ptr cinfo) +{ + my_inputctl_ptr inputctl = (my_inputctl_ptr) cinfo->inputctl; + + inputctl->pub.consume_input = consume_markers; + inputctl->pub.has_multiple_scans = FALSE; /* "unknown" would be better */ + inputctl->pub.eoi_reached = FALSE; + inputctl->inheaders = 1; + /* Reset other modules */ + (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo); + (*cinfo->marker->reset_marker_reader) (cinfo); + /* Reset progression state -- would be cleaner if entropy decoder did this */ + cinfo->coef_bits = NULL; +} + + +/* + * Initialize the input controller module. + * This is called only once, when the decompression object is created. + */ + +GLOBAL(void) +jinit_input_controller (j_decompress_ptr cinfo) +{ + my_inputctl_ptr inputctl; + + /* Create subobject in permanent pool */ + inputctl = (my_inputctl_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + SIZEOF(my_input_controller)); + cinfo->inputctl = &inputctl->pub; + /* Initialize method pointers */ + inputctl->pub.consume_input = consume_markers; + inputctl->pub.reset_input_controller = reset_input_controller; + inputctl->pub.start_input_pass = start_input_pass; + inputctl->pub.finish_input_pass = finish_input_pass; + /* Initialize state: can't use reset_input_controller since we don't + * want to try to reset other modules yet. + */ + inputctl->pub.has_multiple_scans = FALSE; /* "unknown" would be better */ + inputctl->pub.eoi_reached = FALSE; + inputctl->inheaders = 1; +} diff --git a/compat/libjpeg/jdmainct.c b/compat/libjpeg/jdmainct.c new file mode 100755 index 0000000..7ced438 --- /dev/null +++ b/compat/libjpeg/jdmainct.c @@ -0,0 +1,513 @@ +/* + * jdmainct.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2002-2012 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the main buffer controller for decompression. + * The main buffer lies between the JPEG decompressor proper and the + * post-processor; it holds downsampled data in the JPEG colorspace. + * + * Note that this code is bypassed in raw-data mode, since the application + * supplies the equivalent of the main buffer in that case. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * In the current system design, the main buffer need never be a full-image + * buffer; any full-height buffers will be found inside the coefficient or + * postprocessing controllers. Nonetheless, the main controller is not + * trivial. Its responsibility is to provide context rows for upsampling/ + * rescaling, and doing this in an efficient fashion is a bit tricky. + * + * Postprocessor input data is counted in "row groups". A row group + * is defined to be (v_samp_factor * DCT_scaled_size / min_DCT_scaled_size) + * sample rows of each component. (We require DCT_scaled_size values to be + * chosen such that these numbers are integers. In practice DCT_scaled_size + * values will likely be powers of two, so we actually have the stronger + * condition that DCT_scaled_size / min_DCT_scaled_size is an integer.) + * Upsampling will typically produce max_v_samp_factor pixel rows from each + * row group (times any additional scale factor that the upsampler is + * applying). + * + * The coefficient controller will deliver data to us one iMCU row at a time; + * each iMCU row contains v_samp_factor * DCT_scaled_size sample rows, or + * exactly min_DCT_scaled_size row groups. (This amount of data corresponds + * to one row of MCUs when the image is fully interleaved.) Note that the + * number of sample rows varies across components, but the number of row + * groups does not. Some garbage sample rows may be included in the last iMCU + * row at the bottom of the image. + * + * Depending on the vertical scaling algorithm used, the upsampler may need + * access to the sample row(s) above and below its current input row group. + * The upsampler is required to set need_context_rows TRUE at global selection + * time if so. When need_context_rows is FALSE, this controller can simply + * obtain one iMCU row at a time from the coefficient controller and dole it + * out as row groups to the postprocessor. + * + * When need_context_rows is TRUE, this controller guarantees that the buffer + * passed to postprocessing contains at least one row group's worth of samples + * above and below the row group(s) being processed. Note that the context + * rows "above" the first passed row group appear at negative row offsets in + * the passed buffer. At the top and bottom of the image, the required + * context rows are manufactured by duplicating the first or last real sample + * row; this avoids having special cases in the upsampling inner loops. + * + * The amount of context is fixed at one row group just because that's a + * convenient number for this controller to work with. The existing + * upsamplers really only need one sample row of context. An upsampler + * supporting arbitrary output rescaling might wish for more than one row + * group of context when shrinking the image; tough, we don't handle that. + * (This is justified by the assumption that downsizing will be handled mostly + * by adjusting the DCT_scaled_size values, so that the actual scale factor at + * the upsample step needn't be much less than one.) + * + * To provide the desired context, we have to retain the last two row groups + * of one iMCU row while reading in the next iMCU row. (The last row group + * can't be processed until we have another row group for its below-context, + * and so we have to save the next-to-last group too for its above-context.) + * We could do this most simply by copying data around in our buffer, but + * that'd be very slow. We can avoid copying any data by creating a rather + * strange pointer structure. Here's how it works. We allocate a workspace + * consisting of M+2 row groups (where M = min_DCT_scaled_size is the number + * of row groups per iMCU row). We create two sets of redundant pointers to + * the workspace. Labeling the physical row groups 0 to M+1, the synthesized + * pointer lists look like this: + * M+1 M-1 + * master pointer --> 0 master pointer --> 0 + * 1 1 + * ... ... + * M-3 M-3 + * M-2 M + * M-1 M+1 + * M M-2 + * M+1 M-1 + * 0 0 + * We read alternate iMCU rows using each master pointer; thus the last two + * row groups of the previous iMCU row remain un-overwritten in the workspace. + * The pointer lists are set up so that the required context rows appear to + * be adjacent to the proper places when we pass the pointer lists to the + * upsampler. + * + * The above pictures describe the normal state of the pointer lists. + * At top and bottom of the image, we diddle the pointer lists to duplicate + * the first or last sample row as necessary (this is cheaper than copying + * sample rows around). + * + * This scheme breaks down if M < 2, ie, min_DCT_scaled_size is 1. In that + * situation each iMCU row provides only one row group so the buffering logic + * must be different (eg, we must read two iMCU rows before we can emit the + * first row group). For now, we simply do not support providing context + * rows when min_DCT_scaled_size is 1. That combination seems unlikely to + * be worth providing --- if someone wants a 1/8th-size preview, they probably + * want it quick and dirty, so a context-free upsampler is sufficient. + */ + + +/* Private buffer controller object */ + +typedef struct { + struct jpeg_d_main_controller pub; /* public fields */ + + /* Pointer to allocated workspace (M or M+2 row groups). */ + JSAMPARRAY buffer[MAX_COMPONENTS]; + + boolean buffer_full; /* Have we gotten an iMCU row from decoder? */ + JDIMENSION rowgroup_ctr; /* counts row groups output to postprocessor */ + + /* Remaining fields are only used in the context case. */ + + /* These are the master pointers to the funny-order pointer lists. */ + JSAMPIMAGE xbuffer[2]; /* pointers to weird pointer lists */ + + int whichptr; /* indicates which pointer set is now in use */ + int context_state; /* process_data state machine status */ + JDIMENSION rowgroups_avail; /* row groups available to postprocessor */ + JDIMENSION iMCU_row_ctr; /* counts iMCU rows to detect image top/bot */ +} my_main_controller; + +typedef my_main_controller * my_main_ptr; + +/* context_state values: */ +#define CTX_PREPARE_FOR_IMCU 0 /* need to prepare for MCU row */ +#define CTX_PROCESS_IMCU 1 /* feeding iMCU to postprocessor */ +#define CTX_POSTPONED_ROW 2 /* feeding postponed row group */ + + +/* Forward declarations */ +METHODDEF(void) process_data_simple_main + JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf, + JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail)); +METHODDEF(void) process_data_context_main + JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf, + JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail)); +#ifdef QUANT_2PASS_SUPPORTED +METHODDEF(void) process_data_crank_post + JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf, + JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail)); +#endif + + +LOCAL(void) +alloc_funny_pointers (j_decompress_ptr cinfo) +/* Allocate space for the funny pointer lists. + * This is done only once, not once per pass. + */ +{ + my_main_ptr mainp = (my_main_ptr) cinfo->main; + int ci, rgroup; + int M = cinfo->min_DCT_v_scaled_size; + jpeg_component_info *compptr; + JSAMPARRAY xbuf; + + /* Get top-level space for component array pointers. + * We alloc both arrays with one call to save a few cycles. + */ + mainp->xbuffer[0] = (JSAMPIMAGE) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + cinfo->num_components * 2 * SIZEOF(JSAMPARRAY)); + mainp->xbuffer[1] = mainp->xbuffer[0] + cinfo->num_components; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + rgroup = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) / + cinfo->min_DCT_v_scaled_size; /* height of a row group of component */ + /* Get space for pointer lists --- M+4 row groups in each list. + * We alloc both pointer lists with one call to save a few cycles. + */ + xbuf = (JSAMPARRAY) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + 2 * (rgroup * (M + 4)) * SIZEOF(JSAMPROW)); + xbuf += rgroup; /* want one row group at negative offsets */ + mainp->xbuffer[0][ci] = xbuf; + xbuf += rgroup * (M + 4); + mainp->xbuffer[1][ci] = xbuf; + } +} + + +LOCAL(void) +make_funny_pointers (j_decompress_ptr cinfo) +/* Create the funny pointer lists discussed in the comments above. + * The actual workspace is already allocated (in main->buffer), + * and the space for the pointer lists is allocated too. + * This routine just fills in the curiously ordered lists. + * This will be repeated at the beginning of each pass. + */ +{ + my_main_ptr mainp = (my_main_ptr) cinfo->main; + int ci, i, rgroup; + int M = cinfo->min_DCT_v_scaled_size; + jpeg_component_info *compptr; + JSAMPARRAY buf, xbuf0, xbuf1; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + rgroup = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) / + cinfo->min_DCT_v_scaled_size; /* height of a row group of component */ + xbuf0 = mainp->xbuffer[0][ci]; + xbuf1 = mainp->xbuffer[1][ci]; + /* First copy the workspace pointers as-is */ + buf = mainp->buffer[ci]; + for (i = 0; i < rgroup * (M + 2); i++) { + xbuf0[i] = xbuf1[i] = buf[i]; + } + /* In the second list, put the last four row groups in swapped order */ + for (i = 0; i < rgroup * 2; i++) { + xbuf1[rgroup*(M-2) + i] = buf[rgroup*M + i]; + xbuf1[rgroup*M + i] = buf[rgroup*(M-2) + i]; + } + /* The wraparound pointers at top and bottom will be filled later + * (see set_wraparound_pointers, below). Initially we want the "above" + * pointers to duplicate the first actual data line. This only needs + * to happen in xbuffer[0]. + */ + for (i = 0; i < rgroup; i++) { + xbuf0[i - rgroup] = xbuf0[0]; + } + } +} + + +LOCAL(void) +set_wraparound_pointers (j_decompress_ptr cinfo) +/* Set up the "wraparound" pointers at top and bottom of the pointer lists. + * This changes the pointer list state from top-of-image to the normal state. + */ +{ + my_main_ptr mainp = (my_main_ptr) cinfo->main; + int ci, i, rgroup; + int M = cinfo->min_DCT_v_scaled_size; + jpeg_component_info *compptr; + JSAMPARRAY xbuf0, xbuf1; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + rgroup = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) / + cinfo->min_DCT_v_scaled_size; /* height of a row group of component */ + xbuf0 = mainp->xbuffer[0][ci]; + xbuf1 = mainp->xbuffer[1][ci]; + for (i = 0; i < rgroup; i++) { + xbuf0[i - rgroup] = xbuf0[rgroup*(M+1) + i]; + xbuf1[i - rgroup] = xbuf1[rgroup*(M+1) + i]; + xbuf0[rgroup*(M+2) + i] = xbuf0[i]; + xbuf1[rgroup*(M+2) + i] = xbuf1[i]; + } + } +} + + +LOCAL(void) +set_bottom_pointers (j_decompress_ptr cinfo) +/* Change the pointer lists to duplicate the last sample row at the bottom + * of the image. whichptr indicates which xbuffer holds the final iMCU row. + * Also sets rowgroups_avail to indicate number of nondummy row groups in row. + */ +{ + my_main_ptr mainp = (my_main_ptr) cinfo->main; + int ci, i, rgroup, iMCUheight, rows_left; + jpeg_component_info *compptr; + JSAMPARRAY xbuf; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Count sample rows in one iMCU row and in one row group */ + iMCUheight = compptr->v_samp_factor * compptr->DCT_v_scaled_size; + rgroup = iMCUheight / cinfo->min_DCT_v_scaled_size; + /* Count nondummy sample rows remaining for this component */ + rows_left = (int) (compptr->downsampled_height % (JDIMENSION) iMCUheight); + if (rows_left == 0) rows_left = iMCUheight; + /* Count nondummy row groups. Should get same answer for each component, + * so we need only do it once. + */ + if (ci == 0) { + mainp->rowgroups_avail = (JDIMENSION) ((rows_left-1) / rgroup + 1); + } + /* Duplicate the last real sample row rgroup*2 times; this pads out the + * last partial rowgroup and ensures at least one full rowgroup of context. + */ + xbuf = mainp->xbuffer[mainp->whichptr][ci]; + for (i = 0; i < rgroup * 2; i++) { + xbuf[rows_left + i] = xbuf[rows_left-1]; + } + } +} + + +/* + * Initialize for a processing pass. + */ + +METHODDEF(void) +start_pass_main (j_decompress_ptr cinfo, J_BUF_MODE pass_mode) +{ + my_main_ptr mainp = (my_main_ptr) cinfo->main; + + switch (pass_mode) { + case JBUF_PASS_THRU: + if (cinfo->upsample->need_context_rows) { + mainp->pub.process_data = process_data_context_main; + make_funny_pointers(cinfo); /* Create the xbuffer[] lists */ + mainp->whichptr = 0; /* Read first iMCU row into xbuffer[0] */ + mainp->context_state = CTX_PREPARE_FOR_IMCU; + mainp->iMCU_row_ctr = 0; + } else { + /* Simple case with no context needed */ + mainp->pub.process_data = process_data_simple_main; + } + mainp->buffer_full = FALSE; /* Mark buffer empty */ + mainp->rowgroup_ctr = 0; + break; +#ifdef QUANT_2PASS_SUPPORTED + case JBUF_CRANK_DEST: + /* For last pass of 2-pass quantization, just crank the postprocessor */ + mainp->pub.process_data = process_data_crank_post; + break; +#endif + default: + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + break; + } +} + + +/* + * Process some data. + * This handles the simple case where no context is required. + */ + +METHODDEF(void) +process_data_simple_main (j_decompress_ptr cinfo, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +{ + my_main_ptr mainp = (my_main_ptr) cinfo->main; + JDIMENSION rowgroups_avail; + + /* Read input data if we haven't filled the main buffer yet */ + if (! mainp->buffer_full) { + if (! (*cinfo->coef->decompress_data) (cinfo, mainp->buffer)) + return; /* suspension forced, can do nothing more */ + mainp->buffer_full = TRUE; /* OK, we have an iMCU row to work with */ + } + + /* There are always min_DCT_scaled_size row groups in an iMCU row. */ + rowgroups_avail = (JDIMENSION) cinfo->min_DCT_v_scaled_size; + /* Note: at the bottom of the image, we may pass extra garbage row groups + * to the postprocessor. The postprocessor has to check for bottom + * of image anyway (at row resolution), so no point in us doing it too. + */ + + /* Feed the postprocessor */ + (*cinfo->post->post_process_data) (cinfo, mainp->buffer, + &mainp->rowgroup_ctr, rowgroups_avail, + output_buf, out_row_ctr, out_rows_avail); + + /* Has postprocessor consumed all the data yet? If so, mark buffer empty */ + if (mainp->rowgroup_ctr >= rowgroups_avail) { + mainp->buffer_full = FALSE; + mainp->rowgroup_ctr = 0; + } +} + + +/* + * Process some data. + * This handles the case where context rows must be provided. + */ + +METHODDEF(void) +process_data_context_main (j_decompress_ptr cinfo, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +{ + my_main_ptr mainp = (my_main_ptr) cinfo->main; + + /* Read input data if we haven't filled the main buffer yet */ + if (! mainp->buffer_full) { + if (! (*cinfo->coef->decompress_data) (cinfo, + mainp->xbuffer[mainp->whichptr])) + return; /* suspension forced, can do nothing more */ + mainp->buffer_full = TRUE; /* OK, we have an iMCU row to work with */ + mainp->iMCU_row_ctr++; /* count rows received */ + } + + /* Postprocessor typically will not swallow all the input data it is handed + * in one call (due to filling the output buffer first). Must be prepared + * to exit and restart. This switch lets us keep track of how far we got. + * Note that each case falls through to the next on successful completion. + */ + switch (mainp->context_state) { + case CTX_POSTPONED_ROW: + /* Call postprocessor using previously set pointers for postponed row */ + (*cinfo->post->post_process_data) (cinfo, mainp->xbuffer[mainp->whichptr], + &mainp->rowgroup_ctr, mainp->rowgroups_avail, + output_buf, out_row_ctr, out_rows_avail); + if (mainp->rowgroup_ctr < mainp->rowgroups_avail) + return; /* Need to suspend */ + mainp->context_state = CTX_PREPARE_FOR_IMCU; + if (*out_row_ctr >= out_rows_avail) + return; /* Postprocessor exactly filled output buf */ + /*FALLTHROUGH*/ + case CTX_PREPARE_FOR_IMCU: + /* Prepare to process first M-1 row groups of this iMCU row */ + mainp->rowgroup_ctr = 0; + mainp->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_v_scaled_size - 1); + /* Check for bottom of image: if so, tweak pointers to "duplicate" + * the last sample row, and adjust rowgroups_avail to ignore padding rows. + */ + if (mainp->iMCU_row_ctr == cinfo->total_iMCU_rows) + set_bottom_pointers(cinfo); + mainp->context_state = CTX_PROCESS_IMCU; + /*FALLTHROUGH*/ + case CTX_PROCESS_IMCU: + /* Call postprocessor using previously set pointers */ + (*cinfo->post->post_process_data) (cinfo, mainp->xbuffer[mainp->whichptr], + &mainp->rowgroup_ctr, mainp->rowgroups_avail, + output_buf, out_row_ctr, out_rows_avail); + if (mainp->rowgroup_ctr < mainp->rowgroups_avail) + return; /* Need to suspend */ + /* After the first iMCU, change wraparound pointers to normal state */ + if (mainp->iMCU_row_ctr == 1) + set_wraparound_pointers(cinfo); + /* Prepare to load new iMCU row using other xbuffer list */ + mainp->whichptr ^= 1; /* 0=>1 or 1=>0 */ + mainp->buffer_full = FALSE; + /* Still need to process last row group of this iMCU row, */ + /* which is saved at index M+1 of the other xbuffer */ + mainp->rowgroup_ctr = (JDIMENSION) (cinfo->min_DCT_v_scaled_size + 1); + mainp->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_v_scaled_size + 2); + mainp->context_state = CTX_POSTPONED_ROW; + } +} + + +/* + * Process some data. + * Final pass of two-pass quantization: just call the postprocessor. + * Source data will be the postprocessor controller's internal buffer. + */ + +#ifdef QUANT_2PASS_SUPPORTED + +METHODDEF(void) +process_data_crank_post (j_decompress_ptr cinfo, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +{ + (*cinfo->post->post_process_data) (cinfo, (JSAMPIMAGE) NULL, + (JDIMENSION *) NULL, (JDIMENSION) 0, + output_buf, out_row_ctr, out_rows_avail); +} + +#endif /* QUANT_2PASS_SUPPORTED */ + + +/* + * Initialize main buffer controller. + */ + +GLOBAL(void) +jinit_d_main_controller (j_decompress_ptr cinfo, boolean need_full_buffer) +{ + my_main_ptr mainp; + int ci, rgroup, ngroups; + jpeg_component_info *compptr; + + mainp = (my_main_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_main_controller)); + cinfo->main = &mainp->pub; + mainp->pub.start_pass = start_pass_main; + + if (need_full_buffer) /* shouldn't happen */ + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + + /* Allocate the workspace. + * ngroups is the number of row groups we need. + */ + if (cinfo->upsample->need_context_rows) { + if (cinfo->min_DCT_v_scaled_size < 2) /* unsupported, see comments above */ + ERREXIT(cinfo, JERR_NOTIMPL); + alloc_funny_pointers(cinfo); /* Alloc space for xbuffer[] lists */ + ngroups = cinfo->min_DCT_v_scaled_size + 2; + } else { + ngroups = cinfo->min_DCT_v_scaled_size; + } + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + rgroup = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) / + cinfo->min_DCT_v_scaled_size; /* height of a row group of component */ + mainp->buffer[ci] = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + compptr->width_in_blocks * ((JDIMENSION) compptr->DCT_h_scaled_size), + (JDIMENSION) (rgroup * ngroups)); + } +} diff --git a/compat/libjpeg/jdmarker.c b/compat/libjpeg/jdmarker.c new file mode 100755 index 0000000..b1faf88 --- /dev/null +++ b/compat/libjpeg/jdmarker.c @@ -0,0 +1,1511 @@ +/* + * jdmarker.c + * + * Copyright (C) 1991-1998, Thomas G. Lane. + * Modified 2009-2013 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to decode JPEG datastream markers. + * Most of the complexity arises from our desire to support input + * suspension: if not all of the data for a marker is available, + * we must exit back to the application. On resumption, we reprocess + * the marker. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +typedef enum { /* JPEG marker codes */ + M_SOF0 = 0xc0, + M_SOF1 = 0xc1, + M_SOF2 = 0xc2, + M_SOF3 = 0xc3, + + M_SOF5 = 0xc5, + M_SOF6 = 0xc6, + M_SOF7 = 0xc7, + + M_JPG = 0xc8, + M_SOF9 = 0xc9, + M_SOF10 = 0xca, + M_SOF11 = 0xcb, + + M_SOF13 = 0xcd, + M_SOF14 = 0xce, + M_SOF15 = 0xcf, + + M_DHT = 0xc4, + + M_DAC = 0xcc, + + M_RST0 = 0xd0, + M_RST1 = 0xd1, + M_RST2 = 0xd2, + M_RST3 = 0xd3, + M_RST4 = 0xd4, + M_RST5 = 0xd5, + M_RST6 = 0xd6, + M_RST7 = 0xd7, + + M_SOI = 0xd8, + M_EOI = 0xd9, + M_SOS = 0xda, + M_DQT = 0xdb, + M_DNL = 0xdc, + M_DRI = 0xdd, + M_DHP = 0xde, + M_EXP = 0xdf, + + M_APP0 = 0xe0, + M_APP1 = 0xe1, + M_APP2 = 0xe2, + M_APP3 = 0xe3, + M_APP4 = 0xe4, + M_APP5 = 0xe5, + M_APP6 = 0xe6, + M_APP7 = 0xe7, + M_APP8 = 0xe8, + M_APP9 = 0xe9, + M_APP10 = 0xea, + M_APP11 = 0xeb, + M_APP12 = 0xec, + M_APP13 = 0xed, + M_APP14 = 0xee, + M_APP15 = 0xef, + + M_JPG0 = 0xf0, + M_JPG8 = 0xf8, + M_JPG13 = 0xfd, + M_COM = 0xfe, + + M_TEM = 0x01, + + M_ERROR = 0x100 +} JPEG_MARKER; + + +/* Private state */ + +typedef struct { + struct jpeg_marker_reader pub; /* public fields */ + + /* Application-overridable marker processing methods */ + jpeg_marker_parser_method process_COM; + jpeg_marker_parser_method process_APPn[16]; + + /* Limit on marker data length to save for each marker type */ + unsigned int length_limit_COM; + unsigned int length_limit_APPn[16]; + + /* Status of COM/APPn marker saving */ + jpeg_saved_marker_ptr cur_marker; /* NULL if not processing a marker */ + unsigned int bytes_read; /* data bytes read so far in marker */ + /* Note: cur_marker is not linked into marker_list until it's all read. */ +} my_marker_reader; + +typedef my_marker_reader * my_marker_ptr; + + +/* + * Macros for fetching data from the data source module. + * + * At all times, cinfo->src->next_input_byte and ->bytes_in_buffer reflect + * the current restart point; we update them only when we have reached a + * suitable place to restart if a suspension occurs. + */ + +/* Declare and initialize local copies of input pointer/count */ +#define INPUT_VARS(cinfo) \ + struct jpeg_source_mgr * datasrc = (cinfo)->src; \ + const JOCTET * next_input_byte = datasrc->next_input_byte; \ + size_t bytes_in_buffer = datasrc->bytes_in_buffer + +/* Unload the local copies --- do this only at a restart boundary */ +#define INPUT_SYNC(cinfo) \ + ( datasrc->next_input_byte = next_input_byte, \ + datasrc->bytes_in_buffer = bytes_in_buffer ) + +/* Reload the local copies --- used only in MAKE_BYTE_AVAIL */ +#define INPUT_RELOAD(cinfo) \ + ( next_input_byte = datasrc->next_input_byte, \ + bytes_in_buffer = datasrc->bytes_in_buffer ) + +/* Internal macro for INPUT_BYTE and INPUT_2BYTES: make a byte available. + * Note we do *not* do INPUT_SYNC before calling fill_input_buffer, + * but we must reload the local copies after a successful fill. + */ +#define MAKE_BYTE_AVAIL(cinfo,action) \ + if (bytes_in_buffer == 0) { \ + if (! (*datasrc->fill_input_buffer) (cinfo)) \ + { action; } \ + INPUT_RELOAD(cinfo); \ + } + +/* Read a byte into variable V. + * If must suspend, take the specified action (typically "return FALSE"). + */ +#define INPUT_BYTE(cinfo,V,action) \ + MAKESTMT( MAKE_BYTE_AVAIL(cinfo,action); \ + bytes_in_buffer--; \ + V = GETJOCTET(*next_input_byte++); ) + +/* As above, but read two bytes interpreted as an unsigned 16-bit integer. + * V should be declared unsigned int or perhaps INT32. + */ +#define INPUT_2BYTES(cinfo,V,action) \ + MAKESTMT( MAKE_BYTE_AVAIL(cinfo,action); \ + bytes_in_buffer--; \ + V = ((unsigned int) GETJOCTET(*next_input_byte++)) << 8; \ + MAKE_BYTE_AVAIL(cinfo,action); \ + bytes_in_buffer--; \ + V += GETJOCTET(*next_input_byte++); ) + + +/* + * Routines to process JPEG markers. + * + * Entry condition: JPEG marker itself has been read and its code saved + * in cinfo->unread_marker; input restart point is just after the marker. + * + * Exit: if return TRUE, have read and processed any parameters, and have + * updated the restart point to point after the parameters. + * If return FALSE, was forced to suspend before reaching end of + * marker parameters; restart point has not been moved. Same routine + * will be called again after application supplies more input data. + * + * This approach to suspension assumes that all of a marker's parameters + * can fit into a single input bufferload. This should hold for "normal" + * markers. Some COM/APPn markers might have large parameter segments + * that might not fit. If we are simply dropping such a marker, we use + * skip_input_data to get past it, and thereby put the problem on the + * source manager's shoulders. If we are saving the marker's contents + * into memory, we use a slightly different convention: when forced to + * suspend, the marker processor updates the restart point to the end of + * what it's consumed (ie, the end of the buffer) before returning FALSE. + * On resumption, cinfo->unread_marker still contains the marker code, + * but the data source will point to the next chunk of marker data. + * The marker processor must retain internal state to deal with this. + * + * Note that we don't bother to avoid duplicate trace messages if a + * suspension occurs within marker parameters. Other side effects + * require more care. + */ + + +LOCAL(boolean) +get_soi (j_decompress_ptr cinfo) +/* Process an SOI marker */ +{ + int i; + + TRACEMS(cinfo, 1, JTRC_SOI); + + if (cinfo->marker->saw_SOI) + ERREXIT(cinfo, JERR_SOI_DUPLICATE); + + /* Reset all parameters that are defined to be reset by SOI */ + + for (i = 0; i < NUM_ARITH_TBLS; i++) { + cinfo->arith_dc_L[i] = 0; + cinfo->arith_dc_U[i] = 1; + cinfo->arith_ac_K[i] = 5; + } + cinfo->restart_interval = 0; + + /* Set initial assumptions for colorspace etc */ + + cinfo->jpeg_color_space = JCS_UNKNOWN; + cinfo->color_transform = JCT_NONE; + cinfo->CCIR601_sampling = FALSE; /* Assume non-CCIR sampling??? */ + + cinfo->saw_JFIF_marker = FALSE; + cinfo->JFIF_major_version = 1; /* set default JFIF APP0 values */ + cinfo->JFIF_minor_version = 1; + cinfo->density_unit = 0; + cinfo->X_density = 1; + cinfo->Y_density = 1; + cinfo->saw_Adobe_marker = FALSE; + cinfo->Adobe_transform = 0; + + cinfo->marker->saw_SOI = TRUE; + + return TRUE; +} + + +LOCAL(boolean) +get_sof (j_decompress_ptr cinfo, boolean is_baseline, boolean is_prog, + boolean is_arith) +/* Process a SOFn marker */ +{ + INT32 length; + int c, ci, i; + jpeg_component_info * compptr; + INPUT_VARS(cinfo); + + cinfo->is_baseline = is_baseline; + cinfo->progressive_mode = is_prog; + cinfo->arith_code = is_arith; + + INPUT_2BYTES(cinfo, length, return FALSE); + + INPUT_BYTE(cinfo, cinfo->data_precision, return FALSE); + INPUT_2BYTES(cinfo, cinfo->image_height, return FALSE); + INPUT_2BYTES(cinfo, cinfo->image_width, return FALSE); + INPUT_BYTE(cinfo, cinfo->num_components, return FALSE); + + length -= 8; + + TRACEMS4(cinfo, 1, JTRC_SOF, cinfo->unread_marker, + (int) cinfo->image_width, (int) cinfo->image_height, + cinfo->num_components); + + if (cinfo->marker->saw_SOF) + ERREXIT(cinfo, JERR_SOF_DUPLICATE); + + /* We don't support files in which the image height is initially specified */ + /* as 0 and is later redefined by DNL. As long as we have to check that, */ + /* might as well have a general sanity check. */ + if (cinfo->image_height <= 0 || cinfo->image_width <= 0 || + cinfo->num_components <= 0) + ERREXIT(cinfo, JERR_EMPTY_IMAGE); + + if (length != (cinfo->num_components * 3)) + ERREXIT(cinfo, JERR_BAD_LENGTH); + + if (cinfo->comp_info == NULL) /* do only once, even if suspend */ + cinfo->comp_info = (jpeg_component_info *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + cinfo->num_components * SIZEOF(jpeg_component_info)); + + for (ci = 0; ci < cinfo->num_components; ci++) { + INPUT_BYTE(cinfo, c, return FALSE); + /* Check to see whether component id has already been seen */ + /* (in violation of the spec, but unfortunately seen in some */ + /* files). If so, create "fake" component id equal to the */ + /* max id seen so far + 1. */ + for (i = 0, compptr = cinfo->comp_info; i < ci; i++, compptr++) { + if (c == compptr->component_id) { + compptr = cinfo->comp_info; + c = compptr->component_id; + compptr++; + for (i = 1; i < ci; i++, compptr++) { + if (compptr->component_id > c) c = compptr->component_id; + } + c++; + break; + } + } + compptr->component_id = c; + compptr->component_index = ci; + INPUT_BYTE(cinfo, c, return FALSE); + compptr->h_samp_factor = (c >> 4) & 15; + compptr->v_samp_factor = (c ) & 15; + INPUT_BYTE(cinfo, compptr->quant_tbl_no, return FALSE); + + TRACEMS4(cinfo, 1, JTRC_SOF_COMPONENT, + compptr->component_id, compptr->h_samp_factor, + compptr->v_samp_factor, compptr->quant_tbl_no); + } + + cinfo->marker->saw_SOF = TRUE; + + INPUT_SYNC(cinfo); + return TRUE; +} + + +LOCAL(boolean) +get_sos (j_decompress_ptr cinfo) +/* Process a SOS marker */ +{ + INT32 length; + int c, ci, i, n; + jpeg_component_info * compptr; + INPUT_VARS(cinfo); + + if (! cinfo->marker->saw_SOF) + ERREXITS(cinfo, JERR_SOF_BEFORE, "SOS"); + + INPUT_2BYTES(cinfo, length, return FALSE); + + INPUT_BYTE(cinfo, n, return FALSE); /* Number of components */ + + TRACEMS1(cinfo, 1, JTRC_SOS, n); + + if (length != (n * 2 + 6) || n > MAX_COMPS_IN_SCAN || + (n == 0 && !cinfo->progressive_mode)) + /* pseudo SOS marker only allowed in progressive mode */ + ERREXIT(cinfo, JERR_BAD_LENGTH); + + cinfo->comps_in_scan = n; + + /* Collect the component-spec parameters */ + + for (i = 0; i < n; i++) { + INPUT_BYTE(cinfo, c, return FALSE); + + /* Detect the case where component id's are not unique, and, if so, */ + /* create a fake component id using the same logic as in get_sof. */ + /* Note: This also ensures that all of the SOF components are */ + /* referenced in the single scan case, which prevents access to */ + /* uninitialized memory in later decoding stages. */ + for (ci = 0; ci < i; ci++) { + if (c == cinfo->cur_comp_info[ci]->component_id) { + c = cinfo->cur_comp_info[0]->component_id; + for (ci = 1; ci < i; ci++) { + compptr = cinfo->cur_comp_info[ci]; + if (compptr->component_id > c) c = compptr->component_id; + } + c++; + break; + } + } + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + if (c == compptr->component_id) + goto id_found; + } + + ERREXIT1(cinfo, JERR_BAD_COMPONENT_ID, c); + + id_found: + + cinfo->cur_comp_info[i] = compptr; + INPUT_BYTE(cinfo, c, return FALSE); + compptr->dc_tbl_no = (c >> 4) & 15; + compptr->ac_tbl_no = (c ) & 15; + + TRACEMS3(cinfo, 1, JTRC_SOS_COMPONENT, compptr->component_id, + compptr->dc_tbl_no, compptr->ac_tbl_no); + } + + /* Collect the additional scan parameters Ss, Se, Ah/Al. */ + INPUT_BYTE(cinfo, c, return FALSE); + cinfo->Ss = c; + INPUT_BYTE(cinfo, c, return FALSE); + cinfo->Se = c; + INPUT_BYTE(cinfo, c, return FALSE); + cinfo->Ah = (c >> 4) & 15; + cinfo->Al = (c ) & 15; + + TRACEMS4(cinfo, 1, JTRC_SOS_PARAMS, cinfo->Ss, cinfo->Se, + cinfo->Ah, cinfo->Al); + + /* Prepare to scan data & restart markers */ + cinfo->marker->next_restart_num = 0; + + /* Count another (non-pseudo) SOS marker */ + if (n) cinfo->input_scan_number++; + + INPUT_SYNC(cinfo); + return TRUE; +} + + +#ifdef D_ARITH_CODING_SUPPORTED + +LOCAL(boolean) +get_dac (j_decompress_ptr cinfo) +/* Process a DAC marker */ +{ + INT32 length; + int index, val; + INPUT_VARS(cinfo); + + INPUT_2BYTES(cinfo, length, return FALSE); + length -= 2; + + while (length > 0) { + INPUT_BYTE(cinfo, index, return FALSE); + INPUT_BYTE(cinfo, val, return FALSE); + + length -= 2; + + TRACEMS2(cinfo, 1, JTRC_DAC, index, val); + + if (index < 0 || index >= (2*NUM_ARITH_TBLS)) + ERREXIT1(cinfo, JERR_DAC_INDEX, index); + + if (index >= NUM_ARITH_TBLS) { /* define AC table */ + cinfo->arith_ac_K[index-NUM_ARITH_TBLS] = (UINT8) val; + } else { /* define DC table */ + cinfo->arith_dc_L[index] = (UINT8) (val & 0x0F); + cinfo->arith_dc_U[index] = (UINT8) (val >> 4); + if (cinfo->arith_dc_L[index] > cinfo->arith_dc_U[index]) + ERREXIT1(cinfo, JERR_DAC_VALUE, val); + } + } + + if (length != 0) + ERREXIT(cinfo, JERR_BAD_LENGTH); + + INPUT_SYNC(cinfo); + return TRUE; +} + +#else /* ! D_ARITH_CODING_SUPPORTED */ + +#define get_dac(cinfo) skip_variable(cinfo) + +#endif /* D_ARITH_CODING_SUPPORTED */ + + +LOCAL(boolean) +get_dht (j_decompress_ptr cinfo) +/* Process a DHT marker */ +{ + INT32 length; + UINT8 bits[17]; + UINT8 huffval[256]; + int i, index, count; + JHUFF_TBL **htblptr; + INPUT_VARS(cinfo); + + INPUT_2BYTES(cinfo, length, return FALSE); + length -= 2; + + while (length > 16) { + INPUT_BYTE(cinfo, index, return FALSE); + + TRACEMS1(cinfo, 1, JTRC_DHT, index); + + bits[0] = 0; + count = 0; + for (i = 1; i <= 16; i++) { + INPUT_BYTE(cinfo, bits[i], return FALSE); + count += bits[i]; + } + + length -= 1 + 16; + + TRACEMS8(cinfo, 2, JTRC_HUFFBITS, + bits[1], bits[2], bits[3], bits[4], + bits[5], bits[6], bits[7], bits[8]); + TRACEMS8(cinfo, 2, JTRC_HUFFBITS, + bits[9], bits[10], bits[11], bits[12], + bits[13], bits[14], bits[15], bits[16]); + + /* Here we just do minimal validation of the counts to avoid walking + * off the end of our table space. jdhuff.c will check more carefully. + */ + if (count > 256 || ((INT32) count) > length) + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + + MEMZERO(huffval, SIZEOF(huffval)); /* pre-zero array for later copy */ + + for (i = 0; i < count; i++) + INPUT_BYTE(cinfo, huffval[i], return FALSE); + + length -= count; + + if (index & 0x10) { /* AC table definition */ + index -= 0x10; + htblptr = &cinfo->ac_huff_tbl_ptrs[index]; + } else { /* DC table definition */ + htblptr = &cinfo->dc_huff_tbl_ptrs[index]; + } + + if (index < 0 || index >= NUM_HUFF_TBLS) + ERREXIT1(cinfo, JERR_DHT_INDEX, index); + + if (*htblptr == NULL) + *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); + + MEMCOPY((*htblptr)->bits, bits, SIZEOF((*htblptr)->bits)); + MEMCOPY((*htblptr)->huffval, huffval, SIZEOF((*htblptr)->huffval)); + } + + if (length != 0) + ERREXIT(cinfo, JERR_BAD_LENGTH); + + INPUT_SYNC(cinfo); + return TRUE; +} + + +LOCAL(boolean) +get_dqt (j_decompress_ptr cinfo) +/* Process a DQT marker */ +{ + INT32 length, count, i; + int n, prec; + unsigned int tmp; + JQUANT_TBL *quant_ptr; + const int *natural_order; + INPUT_VARS(cinfo); + + INPUT_2BYTES(cinfo, length, return FALSE); + length -= 2; + + while (length > 0) { + length--; + INPUT_BYTE(cinfo, n, return FALSE); + prec = n >> 4; + n &= 0x0F; + + TRACEMS2(cinfo, 1, JTRC_DQT, n, prec); + + if (n >= NUM_QUANT_TBLS) + ERREXIT1(cinfo, JERR_DQT_INDEX, n); + + if (cinfo->quant_tbl_ptrs[n] == NULL) + cinfo->quant_tbl_ptrs[n] = jpeg_alloc_quant_table((j_common_ptr) cinfo); + quant_ptr = cinfo->quant_tbl_ptrs[n]; + + if (prec) { + if (length < DCTSIZE2 * 2) { + /* Initialize full table for safety. */ + for (i = 0; i < DCTSIZE2; i++) { + quant_ptr->quantval[i] = 1; + } + count = length >> 1; + } else + count = DCTSIZE2; + } else { + if (length < DCTSIZE2) { + /* Initialize full table for safety. */ + for (i = 0; i < DCTSIZE2; i++) { + quant_ptr->quantval[i] = 1; + } + count = length; + } else + count = DCTSIZE2; + } + + switch (count) { + case (2*2): natural_order = jpeg_natural_order2; break; + case (3*3): natural_order = jpeg_natural_order3; break; + case (4*4): natural_order = jpeg_natural_order4; break; + case (5*5): natural_order = jpeg_natural_order5; break; + case (6*6): natural_order = jpeg_natural_order6; break; + case (7*7): natural_order = jpeg_natural_order7; break; + default: natural_order = jpeg_natural_order; break; + } + + for (i = 0; i < count; i++) { + if (prec) + INPUT_2BYTES(cinfo, tmp, return FALSE); + else + INPUT_BYTE(cinfo, tmp, return FALSE); + /* We convert the zigzag-order table to natural array order. */ + quant_ptr->quantval[natural_order[i]] = (UINT16) tmp; + } + + if (cinfo->err->trace_level >= 2) { + for (i = 0; i < DCTSIZE2; i += 8) { + TRACEMS8(cinfo, 2, JTRC_QUANTVALS, + quant_ptr->quantval[i], quant_ptr->quantval[i+1], + quant_ptr->quantval[i+2], quant_ptr->quantval[i+3], + quant_ptr->quantval[i+4], quant_ptr->quantval[i+5], + quant_ptr->quantval[i+6], quant_ptr->quantval[i+7]); + } + } + + length -= count; + if (prec) length -= count; + } + + if (length != 0) + ERREXIT(cinfo, JERR_BAD_LENGTH); + + INPUT_SYNC(cinfo); + return TRUE; +} + + +LOCAL(boolean) +get_dri (j_decompress_ptr cinfo) +/* Process a DRI marker */ +{ + INT32 length; + unsigned int tmp; + INPUT_VARS(cinfo); + + INPUT_2BYTES(cinfo, length, return FALSE); + + if (length != 4) + ERREXIT(cinfo, JERR_BAD_LENGTH); + + INPUT_2BYTES(cinfo, tmp, return FALSE); + + TRACEMS1(cinfo, 1, JTRC_DRI, tmp); + + cinfo->restart_interval = tmp; + + INPUT_SYNC(cinfo); + return TRUE; +} + + +LOCAL(boolean) +get_lse (j_decompress_ptr cinfo) +/* Process an LSE marker */ +{ + INT32 length; + unsigned int tmp; + int cid; + INPUT_VARS(cinfo); + + if (! cinfo->marker->saw_SOF) + ERREXITS(cinfo, JERR_SOF_BEFORE, "LSE"); + + if (cinfo->num_components < 3) goto bad; + + INPUT_2BYTES(cinfo, length, return FALSE); + + if (length != 24) + ERREXIT(cinfo, JERR_BAD_LENGTH); + + INPUT_BYTE(cinfo, tmp, return FALSE); + if (tmp != 0x0D) /* ID inverse transform specification */ + ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, cinfo->unread_marker); + INPUT_2BYTES(cinfo, tmp, return FALSE); + if (tmp != MAXJSAMPLE) goto bad; /* MAXTRANS */ + INPUT_BYTE(cinfo, tmp, return FALSE); + if (tmp != 3) goto bad; /* Nt=3 */ + INPUT_BYTE(cinfo, cid, return FALSE); + if (cid != cinfo->comp_info[1].component_id) goto bad; + INPUT_BYTE(cinfo, cid, return FALSE); + if (cid != cinfo->comp_info[0].component_id) goto bad; + INPUT_BYTE(cinfo, cid, return FALSE); + if (cid != cinfo->comp_info[2].component_id) goto bad; + INPUT_BYTE(cinfo, tmp, return FALSE); + if (tmp != 0x80) goto bad; /* F1: CENTER1=1, NORM1=0 */ + INPUT_2BYTES(cinfo, tmp, return FALSE); + if (tmp != 0) goto bad; /* A(1,1)=0 */ + INPUT_2BYTES(cinfo, tmp, return FALSE); + if (tmp != 0) goto bad; /* A(1,2)=0 */ + INPUT_BYTE(cinfo, tmp, return FALSE); + if (tmp != 0) goto bad; /* F2: CENTER2=0, NORM2=0 */ + INPUT_2BYTES(cinfo, tmp, return FALSE); + if (tmp != 1) goto bad; /* A(2,1)=1 */ + INPUT_2BYTES(cinfo, tmp, return FALSE); + if (tmp != 0) goto bad; /* A(2,2)=0 */ + INPUT_BYTE(cinfo, tmp, return FALSE); + if (tmp != 0) goto bad; /* F3: CENTER3=0, NORM3=0 */ + INPUT_2BYTES(cinfo, tmp, return FALSE); + if (tmp != 1) goto bad; /* A(3,1)=1 */ + INPUT_2BYTES(cinfo, tmp, return FALSE); + if (tmp != 0) { /* A(3,2)=0 */ + bad: + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + } + + /* OK, valid transform that we can handle. */ + cinfo->color_transform = JCT_SUBTRACT_GREEN; + + INPUT_SYNC(cinfo); + return TRUE; +} + + +/* + * Routines for processing APPn and COM markers. + * These are either saved in memory or discarded, per application request. + * APP0 and APP14 are specially checked to see if they are + * JFIF and Adobe markers, respectively. + */ + +#define APP0_DATA_LEN 14 /* Length of interesting data in APP0 */ +#define APP14_DATA_LEN 12 /* Length of interesting data in APP14 */ +#define APPN_DATA_LEN 14 /* Must be the largest of the above!! */ + + +LOCAL(void) +examine_app0 (j_decompress_ptr cinfo, JOCTET FAR * data, + unsigned int datalen, INT32 remaining) +/* Examine first few bytes from an APP0. + * Take appropriate action if it is a JFIF marker. + * datalen is # of bytes at data[], remaining is length of rest of marker data. + */ +{ + INT32 totallen = (INT32) datalen + remaining; + + if (datalen >= APP0_DATA_LEN && + GETJOCTET(data[0]) == 0x4A && + GETJOCTET(data[1]) == 0x46 && + GETJOCTET(data[2]) == 0x49 && + GETJOCTET(data[3]) == 0x46 && + GETJOCTET(data[4]) == 0) { + /* Found JFIF APP0 marker: save info */ + cinfo->saw_JFIF_marker = TRUE; + cinfo->JFIF_major_version = GETJOCTET(data[5]); + cinfo->JFIF_minor_version = GETJOCTET(data[6]); + cinfo->density_unit = GETJOCTET(data[7]); + cinfo->X_density = (GETJOCTET(data[8]) << 8) + GETJOCTET(data[9]); + cinfo->Y_density = (GETJOCTET(data[10]) << 8) + GETJOCTET(data[11]); + /* Check version. + * Major version must be 1 or 2, anything else signals an incompatible + * change. + * (We used to treat this as an error, but now it's a nonfatal warning, + * because some bozo at Hijaak couldn't read the spec.) + * Minor version should be 0..2, but process anyway if newer. + */ + if (cinfo->JFIF_major_version != 1 && cinfo->JFIF_major_version != 2) + WARNMS2(cinfo, JWRN_JFIF_MAJOR, + cinfo->JFIF_major_version, cinfo->JFIF_minor_version); + /* Generate trace messages */ + TRACEMS5(cinfo, 1, JTRC_JFIF, + cinfo->JFIF_major_version, cinfo->JFIF_minor_version, + cinfo->X_density, cinfo->Y_density, cinfo->density_unit); + /* Validate thumbnail dimensions and issue appropriate messages */ + if (GETJOCTET(data[12]) | GETJOCTET(data[13])) + TRACEMS2(cinfo, 1, JTRC_JFIF_THUMBNAIL, + GETJOCTET(data[12]), GETJOCTET(data[13])); + totallen -= APP0_DATA_LEN; + if (totallen != + ((INT32)GETJOCTET(data[12]) * (INT32)GETJOCTET(data[13]) * (INT32) 3)) + TRACEMS1(cinfo, 1, JTRC_JFIF_BADTHUMBNAILSIZE, (int) totallen); + } else if (datalen >= 6 && + GETJOCTET(data[0]) == 0x4A && + GETJOCTET(data[1]) == 0x46 && + GETJOCTET(data[2]) == 0x58 && + GETJOCTET(data[3]) == 0x58 && + GETJOCTET(data[4]) == 0) { + /* Found JFIF "JFXX" extension APP0 marker */ + /* The library doesn't actually do anything with these, + * but we try to produce a helpful trace message. + */ + switch (GETJOCTET(data[5])) { + case 0x10: + TRACEMS1(cinfo, 1, JTRC_THUMB_JPEG, (int) totallen); + break; + case 0x11: + TRACEMS1(cinfo, 1, JTRC_THUMB_PALETTE, (int) totallen); + break; + case 0x13: + TRACEMS1(cinfo, 1, JTRC_THUMB_RGB, (int) totallen); + break; + default: + TRACEMS2(cinfo, 1, JTRC_JFIF_EXTENSION, + GETJOCTET(data[5]), (int) totallen); + break; + } + } else { + /* Start of APP0 does not match "JFIF" or "JFXX", or too short */ + TRACEMS1(cinfo, 1, JTRC_APP0, (int) totallen); + } +} + + +LOCAL(void) +examine_app14 (j_decompress_ptr cinfo, JOCTET FAR * data, + unsigned int datalen, INT32 remaining) +/* Examine first few bytes from an APP14. + * Take appropriate action if it is an Adobe marker. + * datalen is # of bytes at data[], remaining is length of rest of marker data. + */ +{ + unsigned int version, flags0, flags1, transform; + + if (datalen >= APP14_DATA_LEN && + GETJOCTET(data[0]) == 0x41 && + GETJOCTET(data[1]) == 0x64 && + GETJOCTET(data[2]) == 0x6F && + GETJOCTET(data[3]) == 0x62 && + GETJOCTET(data[4]) == 0x65) { + /* Found Adobe APP14 marker */ + version = (GETJOCTET(data[5]) << 8) + GETJOCTET(data[6]); + flags0 = (GETJOCTET(data[7]) << 8) + GETJOCTET(data[8]); + flags1 = (GETJOCTET(data[9]) << 8) + GETJOCTET(data[10]); + transform = GETJOCTET(data[11]); + TRACEMS4(cinfo, 1, JTRC_ADOBE, version, flags0, flags1, transform); + cinfo->saw_Adobe_marker = TRUE; + cinfo->Adobe_transform = (UINT8) transform; + } else { + /* Start of APP14 does not match "Adobe", or too short */ + TRACEMS1(cinfo, 1, JTRC_APP14, (int) (datalen + remaining)); + } +} + + +METHODDEF(boolean) +get_interesting_appn (j_decompress_ptr cinfo) +/* Process an APP0 or APP14 marker without saving it */ +{ + INT32 length; + JOCTET b[APPN_DATA_LEN]; + unsigned int i, numtoread; + INPUT_VARS(cinfo); + + INPUT_2BYTES(cinfo, length, return FALSE); + length -= 2; + + /* get the interesting part of the marker data */ + if (length >= APPN_DATA_LEN) + numtoread = APPN_DATA_LEN; + else if (length > 0) + numtoread = (unsigned int) length; + else + numtoread = 0; + for (i = 0; i < numtoread; i++) + INPUT_BYTE(cinfo, b[i], return FALSE); + length -= numtoread; + + /* process it */ + switch (cinfo->unread_marker) { + case M_APP0: + examine_app0(cinfo, (JOCTET FAR *) b, numtoread, length); + break; + case M_APP14: + examine_app14(cinfo, (JOCTET FAR *) b, numtoread, length); + break; + default: + /* can't get here unless jpeg_save_markers chooses wrong processor */ + ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, cinfo->unread_marker); + break; + } + + /* skip any remaining data -- could be lots */ + INPUT_SYNC(cinfo); + if (length > 0) + (*cinfo->src->skip_input_data) (cinfo, (long) length); + + return TRUE; +} + + +#ifdef SAVE_MARKERS_SUPPORTED + +METHODDEF(boolean) +save_marker (j_decompress_ptr cinfo) +/* Save an APPn or COM marker into the marker list */ +{ + my_marker_ptr marker = (my_marker_ptr) cinfo->marker; + jpeg_saved_marker_ptr cur_marker = marker->cur_marker; + unsigned int bytes_read, data_length; + JOCTET FAR * data; + INT32 length = 0; + INPUT_VARS(cinfo); + + if (cur_marker == NULL) { + /* begin reading a marker */ + INPUT_2BYTES(cinfo, length, return FALSE); + length -= 2; + if (length >= 0) { /* watch out for bogus length word */ + /* figure out how much we want to save */ + unsigned int limit; + if (cinfo->unread_marker == (int) M_COM) + limit = marker->length_limit_COM; + else + limit = marker->length_limit_APPn[cinfo->unread_marker - (int) M_APP0]; + if ((unsigned int) length < limit) + limit = (unsigned int) length; + /* allocate and initialize the marker item */ + cur_marker = (jpeg_saved_marker_ptr) + (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(struct jpeg_marker_struct) + limit); + cur_marker->next = NULL; + cur_marker->marker = (UINT8) cinfo->unread_marker; + cur_marker->original_length = (unsigned int) length; + cur_marker->data_length = limit; + /* data area is just beyond the jpeg_marker_struct */ + data = cur_marker->data = (JOCTET FAR *) (cur_marker + 1); + marker->cur_marker = cur_marker; + marker->bytes_read = 0; + bytes_read = 0; + data_length = limit; + } else { + /* deal with bogus length word */ + bytes_read = data_length = 0; + data = NULL; + } + } else { + /* resume reading a marker */ + bytes_read = marker->bytes_read; + data_length = cur_marker->data_length; + data = cur_marker->data + bytes_read; + } + + while (bytes_read < data_length) { + INPUT_SYNC(cinfo); /* move the restart point to here */ + marker->bytes_read = bytes_read; + /* If there's not at least one byte in buffer, suspend */ + MAKE_BYTE_AVAIL(cinfo, return FALSE); + /* Copy bytes with reasonable rapidity */ + while (bytes_read < data_length && bytes_in_buffer > 0) { + *data++ = *next_input_byte++; + bytes_in_buffer--; + bytes_read++; + } + } + + /* Done reading what we want to read */ + if (cur_marker != NULL) { /* will be NULL if bogus length word */ + /* Add new marker to end of list */ + if (cinfo->marker_list == NULL) { + cinfo->marker_list = cur_marker; + } else { + jpeg_saved_marker_ptr prev = cinfo->marker_list; + while (prev->next != NULL) + prev = prev->next; + prev->next = cur_marker; + } + /* Reset pointer & calc remaining data length */ + data = cur_marker->data; + length = cur_marker->original_length - data_length; + } + /* Reset to initial state for next marker */ + marker->cur_marker = NULL; + + /* Process the marker if interesting; else just make a generic trace msg */ + switch (cinfo->unread_marker) { + case M_APP0: + examine_app0(cinfo, data, data_length, length); + break; + case M_APP14: + examine_app14(cinfo, data, data_length, length); + break; + default: + TRACEMS2(cinfo, 1, JTRC_MISC_MARKER, cinfo->unread_marker, + (int) (data_length + length)); + break; + } + + /* skip any remaining data -- could be lots */ + INPUT_SYNC(cinfo); /* do before skip_input_data */ + if (length > 0) + (*cinfo->src->skip_input_data) (cinfo, (long) length); + + return TRUE; +} + +#endif /* SAVE_MARKERS_SUPPORTED */ + + +METHODDEF(boolean) +skip_variable (j_decompress_ptr cinfo) +/* Skip over an unknown or uninteresting variable-length marker */ +{ + INT32 length; + INPUT_VARS(cinfo); + + INPUT_2BYTES(cinfo, length, return FALSE); + length -= 2; + + TRACEMS2(cinfo, 1, JTRC_MISC_MARKER, cinfo->unread_marker, (int) length); + + INPUT_SYNC(cinfo); /* do before skip_input_data */ + if (length > 0) + (*cinfo->src->skip_input_data) (cinfo, (long) length); + + return TRUE; +} + + +/* + * Find the next JPEG marker, save it in cinfo->unread_marker. + * Returns FALSE if had to suspend before reaching a marker; + * in that case cinfo->unread_marker is unchanged. + * + * Note that the result might not be a valid marker code, + * but it will never be 0 or FF. + */ + +LOCAL(boolean) +next_marker (j_decompress_ptr cinfo) +{ + int c; + INPUT_VARS(cinfo); + + for (;;) { + INPUT_BYTE(cinfo, c, return FALSE); + /* Skip any non-FF bytes. + * This may look a bit inefficient, but it will not occur in a valid file. + * We sync after each discarded byte so that a suspending data source + * can discard the byte from its buffer. + */ + while (c != 0xFF) { + cinfo->marker->discarded_bytes++; + INPUT_SYNC(cinfo); + INPUT_BYTE(cinfo, c, return FALSE); + } + /* This loop swallows any duplicate FF bytes. Extra FFs are legal as + * pad bytes, so don't count them in discarded_bytes. We assume there + * will not be so many consecutive FF bytes as to overflow a suspending + * data source's input buffer. + */ + do { + INPUT_BYTE(cinfo, c, return FALSE); + } while (c == 0xFF); + if (c != 0) + break; /* found a valid marker, exit loop */ + /* Reach here if we found a stuffed-zero data sequence (FF/00). + * Discard it and loop back to try again. + */ + cinfo->marker->discarded_bytes += 2; + INPUT_SYNC(cinfo); + } + + if (cinfo->marker->discarded_bytes != 0) { + WARNMS2(cinfo, JWRN_EXTRANEOUS_DATA, cinfo->marker->discarded_bytes, c); + cinfo->marker->discarded_bytes = 0; + } + + cinfo->unread_marker = c; + + INPUT_SYNC(cinfo); + return TRUE; +} + + +LOCAL(boolean) +first_marker (j_decompress_ptr cinfo) +/* Like next_marker, but used to obtain the initial SOI marker. */ +/* For this marker, we do not allow preceding garbage or fill; otherwise, + * we might well scan an entire input file before realizing it ain't JPEG. + * If an application wants to process non-JFIF files, it must seek to the + * SOI before calling the JPEG library. + */ +{ + int c, c2; + INPUT_VARS(cinfo); + + INPUT_BYTE(cinfo, c, return FALSE); + INPUT_BYTE(cinfo, c2, return FALSE); + if (c != 0xFF || c2 != (int) M_SOI) + ERREXIT2(cinfo, JERR_NO_SOI, c, c2); + + cinfo->unread_marker = c2; + + INPUT_SYNC(cinfo); + return TRUE; +} + + +/* + * Read markers until SOS or EOI. + * + * Returns same codes as are defined for jpeg_consume_input: + * JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI. + * + * Note: This function may return a pseudo SOS marker (with zero + * component number) for treat by input controller's consume_input. + * consume_input itself should filter out (skip) the pseudo marker + * after processing for the caller. + */ + +METHODDEF(int) +read_markers (j_decompress_ptr cinfo) +{ + /* Outer loop repeats once for each marker. */ + for (;;) { + /* Collect the marker proper, unless we already did. */ + /* NB: first_marker() enforces the requirement that SOI appear first. */ + if (cinfo->unread_marker == 0) { + if (! cinfo->marker->saw_SOI) { + if (! first_marker(cinfo)) + return JPEG_SUSPENDED; + } else { + if (! next_marker(cinfo)) + return JPEG_SUSPENDED; + } + } + /* At this point cinfo->unread_marker contains the marker code and the + * input point is just past the marker proper, but before any parameters. + * A suspension will cause us to return with this state still true. + */ + switch (cinfo->unread_marker) { + case M_SOI: + if (! get_soi(cinfo)) + return JPEG_SUSPENDED; + break; + + case M_SOF0: /* Baseline */ + if (! get_sof(cinfo, TRUE, FALSE, FALSE)) + return JPEG_SUSPENDED; + break; + + case M_SOF1: /* Extended sequential, Huffman */ + if (! get_sof(cinfo, FALSE, FALSE, FALSE)) + return JPEG_SUSPENDED; + break; + + case M_SOF2: /* Progressive, Huffman */ + if (! get_sof(cinfo, FALSE, TRUE, FALSE)) + return JPEG_SUSPENDED; + break; + + case M_SOF9: /* Extended sequential, arithmetic */ + if (! get_sof(cinfo, FALSE, FALSE, TRUE)) + return JPEG_SUSPENDED; + break; + + case M_SOF10: /* Progressive, arithmetic */ + if (! get_sof(cinfo, FALSE, TRUE, TRUE)) + return JPEG_SUSPENDED; + break; + + /* Currently unsupported SOFn types */ + case M_SOF3: /* Lossless, Huffman */ + case M_SOF5: /* Differential sequential, Huffman */ + case M_SOF6: /* Differential progressive, Huffman */ + case M_SOF7: /* Differential lossless, Huffman */ + case M_JPG: /* Reserved for JPEG extensions */ + case M_SOF11: /* Lossless, arithmetic */ + case M_SOF13: /* Differential sequential, arithmetic */ + case M_SOF14: /* Differential progressive, arithmetic */ + case M_SOF15: /* Differential lossless, arithmetic */ + ERREXIT1(cinfo, JERR_SOF_UNSUPPORTED, cinfo->unread_marker); + break; + + case M_SOS: + if (! get_sos(cinfo)) + return JPEG_SUSPENDED; + cinfo->unread_marker = 0; /* processed the marker */ + return JPEG_REACHED_SOS; + + case M_EOI: + TRACEMS(cinfo, 1, JTRC_EOI); + cinfo->unread_marker = 0; /* processed the marker */ + return JPEG_REACHED_EOI; + + case M_DAC: + if (! get_dac(cinfo)) + return JPEG_SUSPENDED; + break; + + case M_DHT: + if (! get_dht(cinfo)) + return JPEG_SUSPENDED; + break; + + case M_DQT: + if (! get_dqt(cinfo)) + return JPEG_SUSPENDED; + break; + + case M_DRI: + if (! get_dri(cinfo)) + return JPEG_SUSPENDED; + break; + + case M_JPG8: + if (! get_lse(cinfo)) + return JPEG_SUSPENDED; + break; + + case M_APP0: + case M_APP1: + case M_APP2: + case M_APP3: + case M_APP4: + case M_APP5: + case M_APP6: + case M_APP7: + case M_APP8: + case M_APP9: + case M_APP10: + case M_APP11: + case M_APP12: + case M_APP13: + case M_APP14: + case M_APP15: + if (! (*((my_marker_ptr) cinfo->marker)->process_APPn[ + cinfo->unread_marker - (int) M_APP0]) (cinfo)) + return JPEG_SUSPENDED; + break; + + case M_COM: + if (! (*((my_marker_ptr) cinfo->marker)->process_COM) (cinfo)) + return JPEG_SUSPENDED; + break; + + case M_RST0: /* these are all parameterless */ + case M_RST1: + case M_RST2: + case M_RST3: + case M_RST4: + case M_RST5: + case M_RST6: + case M_RST7: + case M_TEM: + TRACEMS1(cinfo, 1, JTRC_PARMLESS_MARKER, cinfo->unread_marker); + break; + + case M_DNL: /* Ignore DNL ... perhaps the wrong thing */ + if (! skip_variable(cinfo)) + return JPEG_SUSPENDED; + break; + + default: /* must be DHP, EXP, JPGn, or RESn */ + /* For now, we treat the reserved markers as fatal errors since they are + * likely to be used to signal incompatible JPEG Part 3 extensions. + * Once the JPEG 3 version-number marker is well defined, this code + * ought to change! + */ + ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, cinfo->unread_marker); + break; + } + /* Successfully processed marker, so reset state variable */ + cinfo->unread_marker = 0; + } /* end loop */ +} + + +/* + * Read a restart marker, which is expected to appear next in the datastream; + * if the marker is not there, take appropriate recovery action. + * Returns FALSE if suspension is required. + * + * This is called by the entropy decoder after it has read an appropriate + * number of MCUs. cinfo->unread_marker may be nonzero if the entropy decoder + * has already read a marker from the data source. Under normal conditions + * cinfo->unread_marker will be reset to 0 before returning; if not reset, + * it holds a marker which the decoder will be unable to read past. + */ + +METHODDEF(boolean) +read_restart_marker (j_decompress_ptr cinfo) +{ + /* Obtain a marker unless we already did. */ + /* Note that next_marker will complain if it skips any data. */ + if (cinfo->unread_marker == 0) { + if (! next_marker(cinfo)) + return FALSE; + } + + if (cinfo->unread_marker == + ((int) M_RST0 + cinfo->marker->next_restart_num)) { + /* Normal case --- swallow the marker and let entropy decoder continue */ + TRACEMS1(cinfo, 3, JTRC_RST, cinfo->marker->next_restart_num); + cinfo->unread_marker = 0; + } else { + /* Uh-oh, the restart markers have been messed up. */ + /* Let the data source manager determine how to resync. */ + if (! (*cinfo->src->resync_to_restart) (cinfo, + cinfo->marker->next_restart_num)) + return FALSE; + } + + /* Update next-restart state */ + cinfo->marker->next_restart_num = (cinfo->marker->next_restart_num + 1) & 7; + + return TRUE; +} + + +/* + * This is the default resync_to_restart method for data source managers + * to use if they don't have any better approach. Some data source managers + * may be able to back up, or may have additional knowledge about the data + * which permits a more intelligent recovery strategy; such managers would + * presumably supply their own resync method. + * + * read_restart_marker calls resync_to_restart if it finds a marker other than + * the restart marker it was expecting. (This code is *not* used unless + * a nonzero restart interval has been declared.) cinfo->unread_marker is + * the marker code actually found (might be anything, except 0 or FF). + * The desired restart marker number (0..7) is passed as a parameter. + * This routine is supposed to apply whatever error recovery strategy seems + * appropriate in order to position the input stream to the next data segment. + * Note that cinfo->unread_marker is treated as a marker appearing before + * the current data-source input point; usually it should be reset to zero + * before returning. + * Returns FALSE if suspension is required. + * + * This implementation is substantially constrained by wanting to treat the + * input as a data stream; this means we can't back up. Therefore, we have + * only the following actions to work with: + * 1. Simply discard the marker and let the entropy decoder resume at next + * byte of file. + * 2. Read forward until we find another marker, discarding intervening + * data. (In theory we could look ahead within the current bufferload, + * without having to discard data if we don't find the desired marker. + * This idea is not implemented here, in part because it makes behavior + * dependent on buffer size and chance buffer-boundary positions.) + * 3. Leave the marker unread (by failing to zero cinfo->unread_marker). + * This will cause the entropy decoder to process an empty data segment, + * inserting dummy zeroes, and then we will reprocess the marker. + * + * #2 is appropriate if we think the desired marker lies ahead, while #3 is + * appropriate if the found marker is a future restart marker (indicating + * that we have missed the desired restart marker, probably because it got + * corrupted). + * We apply #2 or #3 if the found marker is a restart marker no more than + * two counts behind or ahead of the expected one. We also apply #2 if the + * found marker is not a legal JPEG marker code (it's certainly bogus data). + * If the found marker is a restart marker more than 2 counts away, we do #1 + * (too much risk that the marker is erroneous; with luck we will be able to + * resync at some future point). + * For any valid non-restart JPEG marker, we apply #3. This keeps us from + * overrunning the end of a scan. An implementation limited to single-scan + * files might find it better to apply #2 for markers other than EOI, since + * any other marker would have to be bogus data in that case. + */ + +GLOBAL(boolean) +jpeg_resync_to_restart (j_decompress_ptr cinfo, int desired) +{ + int marker = cinfo->unread_marker; + int action = 1; + + /* Always put up a warning. */ + WARNMS2(cinfo, JWRN_MUST_RESYNC, marker, desired); + + /* Outer loop handles repeated decision after scanning forward. */ + for (;;) { + if (marker < (int) M_SOF0) + action = 2; /* invalid marker */ + else if (marker < (int) M_RST0 || marker > (int) M_RST7) + action = 3; /* valid non-restart marker */ + else { + if (marker == ((int) M_RST0 + ((desired+1) & 7)) || + marker == ((int) M_RST0 + ((desired+2) & 7))) + action = 3; /* one of the next two expected restarts */ + else if (marker == ((int) M_RST0 + ((desired-1) & 7)) || + marker == ((int) M_RST0 + ((desired-2) & 7))) + action = 2; /* a prior restart, so advance */ + else + action = 1; /* desired restart or too far away */ + } + TRACEMS2(cinfo, 4, JTRC_RECOVERY_ACTION, marker, action); + switch (action) { + case 1: + /* Discard marker and let entropy decoder resume processing. */ + cinfo->unread_marker = 0; + return TRUE; + case 2: + /* Scan to the next marker, and repeat the decision loop. */ + if (! next_marker(cinfo)) + return FALSE; + marker = cinfo->unread_marker; + break; + case 3: + /* Return without advancing past this marker. */ + /* Entropy decoder will be forced to process an empty segment. */ + return TRUE; + } + } /* end loop */ +} + + +/* + * Reset marker processing state to begin a fresh datastream. + */ + +METHODDEF(void) +reset_marker_reader (j_decompress_ptr cinfo) +{ + my_marker_ptr marker = (my_marker_ptr) cinfo->marker; + + cinfo->comp_info = NULL; /* until allocated by get_sof */ + cinfo->input_scan_number = 0; /* no SOS seen yet */ + cinfo->unread_marker = 0; /* no pending marker */ + marker->pub.saw_SOI = FALSE; /* set internal state too */ + marker->pub.saw_SOF = FALSE; + marker->pub.discarded_bytes = 0; + marker->cur_marker = NULL; +} + + +/* + * Initialize the marker reader module. + * This is called only once, when the decompression object is created. + */ + +GLOBAL(void) +jinit_marker_reader (j_decompress_ptr cinfo) +{ + my_marker_ptr marker; + int i; + + /* Create subobject in permanent pool */ + marker = (my_marker_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + SIZEOF(my_marker_reader)); + cinfo->marker = &marker->pub; + /* Initialize public method pointers */ + marker->pub.reset_marker_reader = reset_marker_reader; + marker->pub.read_markers = read_markers; + marker->pub.read_restart_marker = read_restart_marker; + /* Initialize COM/APPn processing. + * By default, we examine and then discard APP0 and APP14, + * but simply discard COM and all other APPn. + */ + marker->process_COM = skip_variable; + marker->length_limit_COM = 0; + for (i = 0; i < 16; i++) { + marker->process_APPn[i] = skip_variable; + marker->length_limit_APPn[i] = 0; + } + marker->process_APPn[0] = get_interesting_appn; + marker->process_APPn[14] = get_interesting_appn; + /* Reset marker processing state */ + reset_marker_reader(cinfo); +} + + +/* + * Control saving of COM and APPn markers into marker_list. + */ + +#ifdef SAVE_MARKERS_SUPPORTED + +GLOBAL(void) +jpeg_save_markers (j_decompress_ptr cinfo, int marker_code, + unsigned int length_limit) +{ + my_marker_ptr marker = (my_marker_ptr) cinfo->marker; + long maxlength; + jpeg_marker_parser_method processor; + + /* Length limit mustn't be larger than what we can allocate + * (should only be a concern in a 16-bit environment). + */ + maxlength = cinfo->mem->max_alloc_chunk - SIZEOF(struct jpeg_marker_struct); + if (((long) length_limit) > maxlength) + length_limit = (unsigned int) maxlength; + + /* Choose processor routine to use. + * APP0/APP14 have special requirements. + */ + if (length_limit) { + processor = save_marker; + /* If saving APP0/APP14, save at least enough for our internal use. */ + if (marker_code == (int) M_APP0 && length_limit < APP0_DATA_LEN) + length_limit = APP0_DATA_LEN; + else if (marker_code == (int) M_APP14 && length_limit < APP14_DATA_LEN) + length_limit = APP14_DATA_LEN; + } else { + processor = skip_variable; + /* If discarding APP0/APP14, use our regular on-the-fly processor. */ + if (marker_code == (int) M_APP0 || marker_code == (int) M_APP14) + processor = get_interesting_appn; + } + + if (marker_code == (int) M_COM) { + marker->process_COM = processor; + marker->length_limit_COM = length_limit; + } else if (marker_code >= (int) M_APP0 && marker_code <= (int) M_APP15) { + marker->process_APPn[marker_code - (int) M_APP0] = processor; + marker->length_limit_APPn[marker_code - (int) M_APP0] = length_limit; + } else + ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, marker_code); +} + +#endif /* SAVE_MARKERS_SUPPORTED */ + + +/* + * Install a special processing method for COM or APPn markers. + */ + +GLOBAL(void) +jpeg_set_marker_processor (j_decompress_ptr cinfo, int marker_code, + jpeg_marker_parser_method routine) +{ + my_marker_ptr marker = (my_marker_ptr) cinfo->marker; + + if (marker_code == (int) M_COM) + marker->process_COM = routine; + else if (marker_code >= (int) M_APP0 && marker_code <= (int) M_APP15) + marker->process_APPn[marker_code - (int) M_APP0] = routine; + else + ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, marker_code); +} diff --git a/compat/libjpeg/jdmaster.c b/compat/libjpeg/jdmaster.c new file mode 100755 index 0000000..0ece558 --- /dev/null +++ b/compat/libjpeg/jdmaster.c @@ -0,0 +1,539 @@ +/* + * jdmaster.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 2002-2015 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains master control logic for the JPEG decompressor. + * These routines are concerned with selecting the modules to be executed + * and with determining the number of passes and the work to be done in each + * pass. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Private state */ + +typedef struct { + struct jpeg_decomp_master pub; /* public fields */ + + int pass_number; /* # of passes completed */ + + boolean using_merged_upsample; /* TRUE if using merged upsample/cconvert */ + + /* Saved references to initialized quantizer modules, + * in case we need to switch modes. + */ + struct jpeg_color_quantizer * quantizer_1pass; + struct jpeg_color_quantizer * quantizer_2pass; +} my_decomp_master; + +typedef my_decomp_master * my_master_ptr; + + +/* + * Determine whether merged upsample/color conversion should be used. + * CRUCIAL: this must match the actual capabilities of jdmerge.c! + */ + +LOCAL(boolean) +use_merged_upsample (j_decompress_ptr cinfo) +{ +#ifdef UPSAMPLE_MERGING_SUPPORTED + /* Merging is the equivalent of plain box-filter upsampling. */ + /* The following condition is only needed if fancy shall select + * a different upsampling method. In our current implementation + * fancy only affects the DCT scaling, thus we can use fancy + * upsampling and merged upsample simultaneously, in particular + * with scaled DCT sizes larger than the default DCTSIZE. + */ +#if 0 + if (cinfo->do_fancy_upsampling) + return FALSE; +#endif + if (cinfo->CCIR601_sampling) + return FALSE; + /* jdmerge.c only supports YCC=>RGB color conversion */ + if ((cinfo->jpeg_color_space != JCS_YCbCr && + cinfo->jpeg_color_space != JCS_BG_YCC) || + cinfo->num_components != 3 || + cinfo->out_color_space != JCS_RGB || + cinfo->out_color_components != RGB_PIXELSIZE || + cinfo->color_transform) + return FALSE; + /* and it only handles 2h1v or 2h2v sampling ratios */ + if (cinfo->comp_info[0].h_samp_factor != 2 || + cinfo->comp_info[1].h_samp_factor != 1 || + cinfo->comp_info[2].h_samp_factor != 1 || + cinfo->comp_info[0].v_samp_factor > 2 || + cinfo->comp_info[1].v_samp_factor != 1 || + cinfo->comp_info[2].v_samp_factor != 1) + return FALSE; + /* furthermore, it doesn't work if we've scaled the IDCTs differently */ + if (cinfo->comp_info[0].DCT_h_scaled_size != cinfo->min_DCT_h_scaled_size || + cinfo->comp_info[1].DCT_h_scaled_size != cinfo->min_DCT_h_scaled_size || + cinfo->comp_info[2].DCT_h_scaled_size != cinfo->min_DCT_h_scaled_size || + cinfo->comp_info[0].DCT_v_scaled_size != cinfo->min_DCT_v_scaled_size || + cinfo->comp_info[1].DCT_v_scaled_size != cinfo->min_DCT_v_scaled_size || + cinfo->comp_info[2].DCT_v_scaled_size != cinfo->min_DCT_v_scaled_size) + return FALSE; + /* ??? also need to test for upsample-time rescaling, when & if supported */ + return TRUE; /* by golly, it'll work... */ +#else + return FALSE; +#endif +} + + +/* + * Compute output image dimensions and related values. + * NOTE: this is exported for possible use by application. + * Hence it mustn't do anything that can't be done twice. + * Also note that it may be called before the master module is initialized! + */ + +GLOBAL(void) +jpeg_calc_output_dimensions (j_decompress_ptr cinfo) +/* Do computations that are needed before master selection phase. + * This function is used for full decompression. + */ +{ +#ifdef IDCT_SCALING_SUPPORTED + int ci; + jpeg_component_info *compptr; +#endif + + /* Prevent application from calling me at wrong times */ + if (cinfo->global_state != DSTATE_READY) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + /* Compute core output image dimensions and DCT scaling choices. */ + jpeg_core_output_dimensions(cinfo); + +#ifdef IDCT_SCALING_SUPPORTED + + /* In selecting the actual DCT scaling for each component, we try to + * scale up the chroma components via IDCT scaling rather than upsampling. + * This saves time if the upsampler gets to use 1:1 scaling. + * Note this code adapts subsampling ratios which are powers of 2. + */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + int ssize = 1; + while (cinfo->min_DCT_h_scaled_size * ssize <= + (cinfo->do_fancy_upsampling ? DCTSIZE : DCTSIZE / 2) && + (cinfo->max_h_samp_factor % (compptr->h_samp_factor * ssize * 2)) == 0) { + ssize = ssize * 2; + } + compptr->DCT_h_scaled_size = cinfo->min_DCT_h_scaled_size * ssize; + ssize = 1; + while (cinfo->min_DCT_v_scaled_size * ssize <= + (cinfo->do_fancy_upsampling ? DCTSIZE : DCTSIZE / 2) && + (cinfo->max_v_samp_factor % (compptr->v_samp_factor * ssize * 2)) == 0) { + ssize = ssize * 2; + } + compptr->DCT_v_scaled_size = cinfo->min_DCT_v_scaled_size * ssize; + + /* We don't support IDCT ratios larger than 2. */ + if (compptr->DCT_h_scaled_size > compptr->DCT_v_scaled_size * 2) + compptr->DCT_h_scaled_size = compptr->DCT_v_scaled_size * 2; + else if (compptr->DCT_v_scaled_size > compptr->DCT_h_scaled_size * 2) + compptr->DCT_v_scaled_size = compptr->DCT_h_scaled_size * 2; + } + + /* Recompute downsampled dimensions of components; + * application needs to know these if using raw downsampled data. + */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Size in samples, after IDCT scaling */ + compptr->downsampled_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * + (long) (compptr->h_samp_factor * compptr->DCT_h_scaled_size), + (long) (cinfo->max_h_samp_factor * cinfo->block_size)); + compptr->downsampled_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * + (long) (compptr->v_samp_factor * compptr->DCT_v_scaled_size), + (long) (cinfo->max_v_samp_factor * cinfo->block_size)); + } + +#endif /* IDCT_SCALING_SUPPORTED */ + + /* Report number of components in selected colorspace. */ + /* Probably this should be in the color conversion module... */ + switch (cinfo->out_color_space) { + case JCS_GRAYSCALE: + cinfo->out_color_components = 1; + break; + case JCS_RGB: + case JCS_BG_RGB: + cinfo->out_color_components = RGB_PIXELSIZE; + break; + case JCS_YCbCr: + case JCS_BG_YCC: + cinfo->out_color_components = 3; + break; + case JCS_CMYK: + case JCS_YCCK: + cinfo->out_color_components = 4; + break; + default: /* else must be same colorspace as in file */ + cinfo->out_color_components = cinfo->num_components; + break; + } + cinfo->output_components = (cinfo->quantize_colors ? 1 : + cinfo->out_color_components); + + /* See if upsampler will want to emit more than one row at a time */ + if (use_merged_upsample(cinfo)) + cinfo->rec_outbuf_height = cinfo->max_v_samp_factor; + else + cinfo->rec_outbuf_height = 1; +} + + +/* + * Several decompression processes need to range-limit values to the range + * 0..MAXJSAMPLE; the input value may fall somewhat outside this range + * due to noise introduced by quantization, roundoff error, etc. These + * processes are inner loops and need to be as fast as possible. On most + * machines, particularly CPUs with pipelines or instruction prefetch, + * a (subscript-check-less) C table lookup + * x = sample_range_limit[x]; + * is faster than explicit tests + * if (x < 0) x = 0; + * else if (x > MAXJSAMPLE) x = MAXJSAMPLE; + * These processes all use a common table prepared by the routine below. + * + * For most steps we can mathematically guarantee that the initial value + * of x is within 2*(MAXJSAMPLE+1) of the legal range, so a table running + * from -2*(MAXJSAMPLE+1) to 3*MAXJSAMPLE+2 is sufficient. But for the + * initial limiting step (just after the IDCT), a wildly out-of-range value + * is possible if the input data is corrupt. To avoid any chance of indexing + * off the end of memory and getting a bad-pointer trap, we perform the + * post-IDCT limiting thus: + * x = (sample_range_limit - SUBSET)[(x + CENTER) & MASK]; + * where MASK is 2 bits wider than legal sample data, ie 10 bits for 8-bit + * samples. Under normal circumstances this is more than enough range and + * a correct output will be generated; with bogus input data the mask will + * cause wraparound, and we will safely generate a bogus-but-in-range output. + * For the post-IDCT step, we want to convert the data from signed to unsigned + * representation by adding CENTERJSAMPLE at the same time that we limit it. + * This is accomplished with SUBSET = CENTER - CENTERJSAMPLE. + * + * Note that the table is allocated in near data space on PCs; it's small + * enough and used often enough to justify this. + */ + +LOCAL(void) +prepare_range_limit_table (j_decompress_ptr cinfo) +/* Allocate and fill in the sample_range_limit table */ +{ + JSAMPLE * table; + int i; + + table = (JSAMPLE *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + 5 * (MAXJSAMPLE+1) * SIZEOF(JSAMPLE)); + /* First segment of range limit table: limit[x] = 0 for x < 0 */ + MEMZERO(table, 2 * (MAXJSAMPLE+1) * SIZEOF(JSAMPLE)); + table += 2 * (MAXJSAMPLE+1); /* allow negative subscripts of table */ + cinfo->sample_range_limit = table; + /* Main part of range limit table: limit[x] = x */ + for (i = 0; i <= MAXJSAMPLE; i++) + table[i] = (JSAMPLE) i; + /* End of range limit table: limit[x] = MAXJSAMPLE for x > MAXJSAMPLE */ + for (; i < 3 * (MAXJSAMPLE+1); i++) + table[i] = MAXJSAMPLE; +} + + +/* + * Master selection of decompression modules. + * This is done once at jpeg_start_decompress time. We determine + * which modules will be used and give them appropriate initialization calls. + * We also initialize the decompressor input side to begin consuming data. + * + * Since jpeg_read_header has finished, we know what is in the SOF + * and (first) SOS markers. We also have all the application parameter + * settings. + */ + +LOCAL(void) +master_selection (j_decompress_ptr cinfo) +{ + my_master_ptr master = (my_master_ptr) cinfo->master; + boolean use_c_buffer; + long samplesperrow; + JDIMENSION jd_samplesperrow; + + /* For now, precision must match compiled-in value... */ + if (cinfo->data_precision != BITS_IN_JSAMPLE) + ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision); + + /* Initialize dimensions and other stuff */ + jpeg_calc_output_dimensions(cinfo); + prepare_range_limit_table(cinfo); + + /* Sanity check on image dimensions */ + if (cinfo->output_height <= 0 || cinfo->output_width <= 0 || + cinfo->out_color_components <= 0) + ERREXIT(cinfo, JERR_EMPTY_IMAGE); + + /* Width of an output scanline must be representable as JDIMENSION. */ + samplesperrow = (long) cinfo->output_width * (long) cinfo->out_color_components; + jd_samplesperrow = (JDIMENSION) samplesperrow; + if ((long) jd_samplesperrow != samplesperrow) + ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); + + /* Initialize my private state */ + master->pass_number = 0; + master->using_merged_upsample = use_merged_upsample(cinfo); + + /* Color quantizer selection */ + master->quantizer_1pass = NULL; + master->quantizer_2pass = NULL; + /* No mode changes if not using buffered-image mode. */ + if (! cinfo->quantize_colors || ! cinfo->buffered_image) { + cinfo->enable_1pass_quant = FALSE; + cinfo->enable_external_quant = FALSE; + cinfo->enable_2pass_quant = FALSE; + } + if (cinfo->quantize_colors) { + if (cinfo->raw_data_out) + ERREXIT(cinfo, JERR_NOTIMPL); + /* 2-pass quantizer only works in 3-component color space. */ + if (cinfo->out_color_components != 3) { + cinfo->enable_1pass_quant = TRUE; + cinfo->enable_external_quant = FALSE; + cinfo->enable_2pass_quant = FALSE; + cinfo->colormap = NULL; + } else if (cinfo->colormap != NULL) { + cinfo->enable_external_quant = TRUE; + } else if (cinfo->two_pass_quantize) { + cinfo->enable_2pass_quant = TRUE; + } else { + cinfo->enable_1pass_quant = TRUE; + } + + if (cinfo->enable_1pass_quant) { +#ifdef QUANT_1PASS_SUPPORTED + jinit_1pass_quantizer(cinfo); + master->quantizer_1pass = cinfo->cquantize; +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } + + /* We use the 2-pass code to map to external colormaps. */ + if (cinfo->enable_2pass_quant || cinfo->enable_external_quant) { +#ifdef QUANT_2PASS_SUPPORTED + jinit_2pass_quantizer(cinfo); + master->quantizer_2pass = cinfo->cquantize; +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } + /* If both quantizers are initialized, the 2-pass one is left active; + * this is necessary for starting with quantization to an external map. + */ + } + + /* Post-processing: in particular, color conversion first */ + if (! cinfo->raw_data_out) { + if (master->using_merged_upsample) { +#ifdef UPSAMPLE_MERGING_SUPPORTED + jinit_merged_upsampler(cinfo); /* does color conversion too */ +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } else { + jinit_color_deconverter(cinfo); + jinit_upsampler(cinfo); + } + jinit_d_post_controller(cinfo, cinfo->enable_2pass_quant); + } + /* Inverse DCT */ + jinit_inverse_dct(cinfo); + /* Entropy decoding: either Huffman or arithmetic coding. */ + if (cinfo->arith_code) + jinit_arith_decoder(cinfo); + else { + jinit_huff_decoder(cinfo); + } + + /* Initialize principal buffer controllers. */ + use_c_buffer = cinfo->inputctl->has_multiple_scans || cinfo->buffered_image; + jinit_d_coef_controller(cinfo, use_c_buffer); + + if (! cinfo->raw_data_out) + jinit_d_main_controller(cinfo, FALSE /* never need full buffer here */); + + /* We can now tell the memory manager to allocate virtual arrays. */ + (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo); + + /* Initialize input side of decompressor to consume first scan. */ + (*cinfo->inputctl->start_input_pass) (cinfo); + +#ifdef D_MULTISCAN_FILES_SUPPORTED + /* If jpeg_start_decompress will read the whole file, initialize + * progress monitoring appropriately. The input step is counted + * as one pass. + */ + if (cinfo->progress != NULL && ! cinfo->buffered_image && + cinfo->inputctl->has_multiple_scans) { + int nscans; + /* Estimate number of scans to set pass_limit. */ + if (cinfo->progressive_mode) { + /* Arbitrarily estimate 2 interleaved DC scans + 3 AC scans/component. */ + nscans = 2 + 3 * cinfo->num_components; + } else { + /* For a nonprogressive multiscan file, estimate 1 scan per component. */ + nscans = cinfo->num_components; + } + cinfo->progress->pass_counter = 0L; + cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows * nscans; + cinfo->progress->completed_passes = 0; + cinfo->progress->total_passes = (cinfo->enable_2pass_quant ? 3 : 2); + /* Count the input pass as done */ + master->pass_number++; + } +#endif /* D_MULTISCAN_FILES_SUPPORTED */ +} + + +/* + * Per-pass setup. + * This is called at the beginning of each output pass. We determine which + * modules will be active during this pass and give them appropriate + * start_pass calls. We also set is_dummy_pass to indicate whether this + * is a "real" output pass or a dummy pass for color quantization. + * (In the latter case, jdapistd.c will crank the pass to completion.) + */ + +METHODDEF(void) +prepare_for_output_pass (j_decompress_ptr cinfo) +{ + my_master_ptr master = (my_master_ptr) cinfo->master; + + if (master->pub.is_dummy_pass) { +#ifdef QUANT_2PASS_SUPPORTED + /* Final pass of 2-pass quantization */ + master->pub.is_dummy_pass = FALSE; + (*cinfo->cquantize->start_pass) (cinfo, FALSE); + (*cinfo->post->start_pass) (cinfo, JBUF_CRANK_DEST); + (*cinfo->main->start_pass) (cinfo, JBUF_CRANK_DEST); +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif /* QUANT_2PASS_SUPPORTED */ + } else { + if (cinfo->quantize_colors && cinfo->colormap == NULL) { + /* Select new quantization method */ + if (cinfo->two_pass_quantize && cinfo->enable_2pass_quant) { + cinfo->cquantize = master->quantizer_2pass; + master->pub.is_dummy_pass = TRUE; + } else if (cinfo->enable_1pass_quant) { + cinfo->cquantize = master->quantizer_1pass; + } else { + ERREXIT(cinfo, JERR_MODE_CHANGE); + } + } + (*cinfo->idct->start_pass) (cinfo); + (*cinfo->coef->start_output_pass) (cinfo); + if (! cinfo->raw_data_out) { + if (! master->using_merged_upsample) + (*cinfo->cconvert->start_pass) (cinfo); + (*cinfo->upsample->start_pass) (cinfo); + if (cinfo->quantize_colors) + (*cinfo->cquantize->start_pass) (cinfo, master->pub.is_dummy_pass); + (*cinfo->post->start_pass) (cinfo, + (master->pub.is_dummy_pass ? JBUF_SAVE_AND_PASS : JBUF_PASS_THRU)); + (*cinfo->main->start_pass) (cinfo, JBUF_PASS_THRU); + } + } + + /* Set up progress monitor's pass info if present */ + if (cinfo->progress != NULL) { + cinfo->progress->completed_passes = master->pass_number; + cinfo->progress->total_passes = master->pass_number + + (master->pub.is_dummy_pass ? 2 : 1); + /* In buffered-image mode, we assume one more output pass if EOI not + * yet reached, but no more passes if EOI has been reached. + */ + if (cinfo->buffered_image && ! cinfo->inputctl->eoi_reached) { + cinfo->progress->total_passes += (cinfo->enable_2pass_quant ? 2 : 1); + } + } +} + + +/* + * Finish up at end of an output pass. + */ + +METHODDEF(void) +finish_output_pass (j_decompress_ptr cinfo) +{ + my_master_ptr master = (my_master_ptr) cinfo->master; + + if (cinfo->quantize_colors) + (*cinfo->cquantize->finish_pass) (cinfo); + master->pass_number++; +} + + +#ifdef D_MULTISCAN_FILES_SUPPORTED + +/* + * Switch to a new external colormap between output passes. + */ + +GLOBAL(void) +jpeg_new_colormap (j_decompress_ptr cinfo) +{ + my_master_ptr master = (my_master_ptr) cinfo->master; + + /* Prevent application from calling me at wrong times */ + if (cinfo->global_state != DSTATE_BUFIMAGE) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + if (cinfo->quantize_colors && cinfo->enable_external_quant && + cinfo->colormap != NULL) { + /* Select 2-pass quantizer for external colormap use */ + cinfo->cquantize = master->quantizer_2pass; + /* Notify quantizer of colormap change */ + (*cinfo->cquantize->new_color_map) (cinfo); + master->pub.is_dummy_pass = FALSE; /* just in case */ + } else + ERREXIT(cinfo, JERR_MODE_CHANGE); +} + +#endif /* D_MULTISCAN_FILES_SUPPORTED */ + + +/* + * Initialize master decompression control and select active modules. + * This is performed at the start of jpeg_start_decompress. + */ + +GLOBAL(void) +jinit_master_decompress (j_decompress_ptr cinfo) +{ + my_master_ptr master; + + master = (my_master_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_decomp_master)); + cinfo->master = &master->pub; + master->pub.prepare_for_output_pass = prepare_for_output_pass; + master->pub.finish_output_pass = finish_output_pass; + + master->pub.is_dummy_pass = FALSE; + + master_selection(cinfo); +} diff --git a/compat/libjpeg/jdmerge.c b/compat/libjpeg/jdmerge.c new file mode 100755 index 0000000..368fa70 --- /dev/null +++ b/compat/libjpeg/jdmerge.c @@ -0,0 +1,445 @@ +/* + * jdmerge.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2013-2015 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains code for merged upsampling/color conversion. + * + * This file combines functions from jdsample.c and jdcolor.c; + * read those files first to understand what's going on. + * + * When the chroma components are to be upsampled by simple replication + * (ie, box filtering), we can save some work in color conversion by + * calculating all the output pixels corresponding to a pair of chroma + * samples at one time. In the conversion equations + * R = Y + K1 * Cr + * G = Y + K2 * Cb + K3 * Cr + * B = Y + K4 * Cb + * only the Y term varies among the group of pixels corresponding to a pair + * of chroma samples, so the rest of the terms can be calculated just once. + * At typical sampling ratios, this eliminates half or three-quarters of the + * multiplications needed for color conversion. + * + * This file currently provides implementations for the following cases: + * YCC => RGB color conversion only (YCbCr or BG_YCC). + * Sampling ratios of 2h1v or 2h2v. + * No scaling needed at upsample time. + * Corner-aligned (non-CCIR601) sampling alignment. + * Other special cases could be added, but in most applications these are + * the only common cases. (For uncommon cases we fall back on the more + * general code in jdsample.c and jdcolor.c.) + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + +#ifdef UPSAMPLE_MERGING_SUPPORTED + + +/* Private subobject */ + +typedef struct { + struct jpeg_upsampler pub; /* public fields */ + + /* Pointer to routine to do actual upsampling/conversion of one row group */ + JMETHOD(void, upmethod, (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr, + JSAMPARRAY output_buf)); + + /* Private state for YCC->RGB conversion */ + int * Cr_r_tab; /* => table for Cr to R conversion */ + int * Cb_b_tab; /* => table for Cb to B conversion */ + INT32 * Cr_g_tab; /* => table for Cr to G conversion */ + INT32 * Cb_g_tab; /* => table for Cb to G conversion */ + + /* For 2:1 vertical sampling, we produce two output rows at a time. + * We need a "spare" row buffer to hold the second output row if the + * application provides just a one-row buffer; we also use the spare + * to discard the dummy last row if the image height is odd. + */ + JSAMPROW spare_row; + boolean spare_full; /* T if spare buffer is occupied */ + + JDIMENSION out_row_width; /* samples per output row */ + JDIMENSION rows_to_go; /* counts rows remaining in image */ +} my_upsampler; + +typedef my_upsampler * my_upsample_ptr; + +#define SCALEBITS 16 /* speediest right-shift on some machines */ +#define ONE_HALF ((INT32) 1 << (SCALEBITS-1)) +#define FIX(x) ((INT32) ((x) * (1L<RGB and BG_YCC->RGB colorspace conversion. + * This is taken directly from jdcolor.c; see that file for more info. + */ + +LOCAL(void) +build_ycc_rgb_table (j_decompress_ptr cinfo) +/* Normal case, sYCC */ +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + int i; + INT32 x; + SHIFT_TEMPS + + upsample->Cr_r_tab = (int *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(int)); + upsample->Cb_b_tab = (int *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(int)); + upsample->Cr_g_tab = (INT32 *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(INT32)); + upsample->Cb_g_tab = (INT32 *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(INT32)); + + for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) { + /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */ + /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */ + /* Cr=>R value is nearest int to 1.402 * x */ + upsample->Cr_r_tab[i] = (int) + RIGHT_SHIFT(FIX(1.402) * x + ONE_HALF, SCALEBITS); + /* Cb=>B value is nearest int to 1.772 * x */ + upsample->Cb_b_tab[i] = (int) + RIGHT_SHIFT(FIX(1.772) * x + ONE_HALF, SCALEBITS); + /* Cr=>G value is scaled-up -0.714136286 * x */ + upsample->Cr_g_tab[i] = (- FIX(0.714136286)) * x; + /* Cb=>G value is scaled-up -0.344136286 * x */ + /* We also add in ONE_HALF so that need not do it in inner loop */ + upsample->Cb_g_tab[i] = (- FIX(0.344136286)) * x + ONE_HALF; + } +} + + +LOCAL(void) +build_bg_ycc_rgb_table (j_decompress_ptr cinfo) +/* Wide gamut case, bg-sYCC */ +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + int i; + INT32 x; + SHIFT_TEMPS + + upsample->Cr_r_tab = (int *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(int)); + upsample->Cb_b_tab = (int *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(int)); + upsample->Cr_g_tab = (INT32 *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(INT32)); + upsample->Cb_g_tab = (INT32 *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(INT32)); + + for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) { + /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */ + /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */ + /* Cr=>R value is nearest int to 2.804 * x */ + upsample->Cr_r_tab[i] = (int) + RIGHT_SHIFT(FIX(2.804) * x + ONE_HALF, SCALEBITS); + /* Cb=>B value is nearest int to 3.544 * x */ + upsample->Cb_b_tab[i] = (int) + RIGHT_SHIFT(FIX(3.544) * x + ONE_HALF, SCALEBITS); + /* Cr=>G value is scaled-up -1.428272572 * x */ + upsample->Cr_g_tab[i] = (- FIX(1.428272572)) * x; + /* Cb=>G value is scaled-up -0.688272572 * x */ + /* We also add in ONE_HALF so that need not do it in inner loop */ + upsample->Cb_g_tab[i] = (- FIX(0.688272572)) * x + ONE_HALF; + } +} + + +/* + * Initialize for an upsampling pass. + */ + +METHODDEF(void) +start_pass_merged_upsample (j_decompress_ptr cinfo) +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + + /* Mark the spare buffer empty */ + upsample->spare_full = FALSE; + /* Initialize total-height counter for detecting bottom of image */ + upsample->rows_to_go = cinfo->output_height; +} + + +/* + * Control routine to do upsampling (and color conversion). + * + * The control routine just handles the row buffering considerations. + */ + +METHODDEF(void) +merged_2v_upsample (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +/* 2:1 vertical sampling case: may need a spare row. */ +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + JSAMPROW work_ptrs[2]; + JDIMENSION num_rows; /* number of rows returned to caller */ + + if (upsample->spare_full) { + /* If we have a spare row saved from a previous cycle, just return it. */ + jcopy_sample_rows(& upsample->spare_row, 0, output_buf + *out_row_ctr, 0, + 1, upsample->out_row_width); + num_rows = 1; + upsample->spare_full = FALSE; + } else { + /* Figure number of rows to return to caller. */ + num_rows = 2; + /* Not more than the distance to the end of the image. */ + if (num_rows > upsample->rows_to_go) + num_rows = upsample->rows_to_go; + /* And not more than what the client can accept: */ + out_rows_avail -= *out_row_ctr; + if (num_rows > out_rows_avail) + num_rows = out_rows_avail; + /* Create output pointer array for upsampler. */ + work_ptrs[0] = output_buf[*out_row_ctr]; + if (num_rows > 1) { + work_ptrs[1] = output_buf[*out_row_ctr + 1]; + } else { + work_ptrs[1] = upsample->spare_row; + upsample->spare_full = TRUE; + } + /* Now do the upsampling. */ + (*upsample->upmethod) (cinfo, input_buf, *in_row_group_ctr, work_ptrs); + } + + /* Adjust counts */ + *out_row_ctr += num_rows; + upsample->rows_to_go -= num_rows; + /* When the buffer is emptied, declare this input row group consumed */ + if (! upsample->spare_full) + (*in_row_group_ctr)++; +} + + +METHODDEF(void) +merged_1v_upsample (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +/* 1:1 vertical sampling case: much easier, never need a spare row. */ +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + + /* Just do the upsampling. */ + (*upsample->upmethod) (cinfo, input_buf, *in_row_group_ctr, + output_buf + *out_row_ctr); + /* Adjust counts */ + (*out_row_ctr)++; + (*in_row_group_ctr)++; +} + + +/* + * These are the routines invoked by the control routines to do + * the actual upsampling/conversion. One row group is processed per call. + * + * Note: since we may be writing directly into application-supplied buffers, + * we have to be honest about the output width; we can't assume the buffer + * has been rounded up to an even width. + */ + + +/* + * Upsample and color convert for the case of 2:1 horizontal and 1:1 vertical. + */ + +METHODDEF(void) +h2v1_merged_upsample (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr, + JSAMPARRAY output_buf) +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + register int y, cred, cgreen, cblue; + int cb, cr; + register JSAMPROW outptr; + JSAMPROW inptr0, inptr1, inptr2; + JDIMENSION col; + /* copy these pointers into registers if possible */ + register JSAMPLE * range_limit = cinfo->sample_range_limit; + int * Crrtab = upsample->Cr_r_tab; + int * Cbbtab = upsample->Cb_b_tab; + INT32 * Crgtab = upsample->Cr_g_tab; + INT32 * Cbgtab = upsample->Cb_g_tab; + SHIFT_TEMPS + + inptr0 = input_buf[0][in_row_group_ctr]; + inptr1 = input_buf[1][in_row_group_ctr]; + inptr2 = input_buf[2][in_row_group_ctr]; + outptr = output_buf[0]; + /* Loop for each pair of output pixels */ + for (col = cinfo->output_width >> 1; col > 0; col--) { + /* Do the chroma part of the calculation */ + cb = GETJSAMPLE(*inptr1++); + cr = GETJSAMPLE(*inptr2++); + cred = Crrtab[cr]; + cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); + cblue = Cbbtab[cb]; + /* Fetch 2 Y values and emit 2 pixels */ + y = GETJSAMPLE(*inptr0++); + outptr[RGB_RED] = range_limit[y + cred]; + outptr[RGB_GREEN] = range_limit[y + cgreen]; + outptr[RGB_BLUE] = range_limit[y + cblue]; + outptr += RGB_PIXELSIZE; + y = GETJSAMPLE(*inptr0++); + outptr[RGB_RED] = range_limit[y + cred]; + outptr[RGB_GREEN] = range_limit[y + cgreen]; + outptr[RGB_BLUE] = range_limit[y + cblue]; + outptr += RGB_PIXELSIZE; + } + /* If image width is odd, do the last output column separately */ + if (cinfo->output_width & 1) { + cb = GETJSAMPLE(*inptr1); + cr = GETJSAMPLE(*inptr2); + cred = Crrtab[cr]; + cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); + cblue = Cbbtab[cb]; + y = GETJSAMPLE(*inptr0); + outptr[RGB_RED] = range_limit[y + cred]; + outptr[RGB_GREEN] = range_limit[y + cgreen]; + outptr[RGB_BLUE] = range_limit[y + cblue]; + } +} + + +/* + * Upsample and color convert for the case of 2:1 horizontal and 2:1 vertical. + */ + +METHODDEF(void) +h2v2_merged_upsample (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr, + JSAMPARRAY output_buf) +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + register int y, cred, cgreen, cblue; + int cb, cr; + register JSAMPROW outptr0, outptr1; + JSAMPROW inptr00, inptr01, inptr1, inptr2; + JDIMENSION col; + /* copy these pointers into registers if possible */ + register JSAMPLE * range_limit = cinfo->sample_range_limit; + int * Crrtab = upsample->Cr_r_tab; + int * Cbbtab = upsample->Cb_b_tab; + INT32 * Crgtab = upsample->Cr_g_tab; + INT32 * Cbgtab = upsample->Cb_g_tab; + SHIFT_TEMPS + + inptr00 = input_buf[0][in_row_group_ctr*2]; + inptr01 = input_buf[0][in_row_group_ctr*2 + 1]; + inptr1 = input_buf[1][in_row_group_ctr]; + inptr2 = input_buf[2][in_row_group_ctr]; + outptr0 = output_buf[0]; + outptr1 = output_buf[1]; + /* Loop for each group of output pixels */ + for (col = cinfo->output_width >> 1; col > 0; col--) { + /* Do the chroma part of the calculation */ + cb = GETJSAMPLE(*inptr1++); + cr = GETJSAMPLE(*inptr2++); + cred = Crrtab[cr]; + cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); + cblue = Cbbtab[cb]; + /* Fetch 4 Y values and emit 4 pixels */ + y = GETJSAMPLE(*inptr00++); + outptr0[RGB_RED] = range_limit[y + cred]; + outptr0[RGB_GREEN] = range_limit[y + cgreen]; + outptr0[RGB_BLUE] = range_limit[y + cblue]; + outptr0 += RGB_PIXELSIZE; + y = GETJSAMPLE(*inptr00++); + outptr0[RGB_RED] = range_limit[y + cred]; + outptr0[RGB_GREEN] = range_limit[y + cgreen]; + outptr0[RGB_BLUE] = range_limit[y + cblue]; + outptr0 += RGB_PIXELSIZE; + y = GETJSAMPLE(*inptr01++); + outptr1[RGB_RED] = range_limit[y + cred]; + outptr1[RGB_GREEN] = range_limit[y + cgreen]; + outptr1[RGB_BLUE] = range_limit[y + cblue]; + outptr1 += RGB_PIXELSIZE; + y = GETJSAMPLE(*inptr01++); + outptr1[RGB_RED] = range_limit[y + cred]; + outptr1[RGB_GREEN] = range_limit[y + cgreen]; + outptr1[RGB_BLUE] = range_limit[y + cblue]; + outptr1 += RGB_PIXELSIZE; + } + /* If image width is odd, do the last output column separately */ + if (cinfo->output_width & 1) { + cb = GETJSAMPLE(*inptr1); + cr = GETJSAMPLE(*inptr2); + cred = Crrtab[cr]; + cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); + cblue = Cbbtab[cb]; + y = GETJSAMPLE(*inptr00); + outptr0[RGB_RED] = range_limit[y + cred]; + outptr0[RGB_GREEN] = range_limit[y + cgreen]; + outptr0[RGB_BLUE] = range_limit[y + cblue]; + y = GETJSAMPLE(*inptr01); + outptr1[RGB_RED] = range_limit[y + cred]; + outptr1[RGB_GREEN] = range_limit[y + cgreen]; + outptr1[RGB_BLUE] = range_limit[y + cblue]; + } +} + + +/* + * Module initialization routine for merged upsampling/color conversion. + * + * NB: this is called under the conditions determined by use_merged_upsample() + * in jdmaster.c. That routine MUST correspond to the actual capabilities + * of this module; no safety checks are made here. + */ + +GLOBAL(void) +jinit_merged_upsampler (j_decompress_ptr cinfo) +{ + my_upsample_ptr upsample; + + upsample = (my_upsample_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_upsampler)); + cinfo->upsample = &upsample->pub; + upsample->pub.start_pass = start_pass_merged_upsample; + upsample->pub.need_context_rows = FALSE; + + upsample->out_row_width = cinfo->output_width * cinfo->out_color_components; + + if (cinfo->max_v_samp_factor == 2) { + upsample->pub.upsample = merged_2v_upsample; + upsample->upmethod = h2v2_merged_upsample; + /* Allocate a spare row buffer */ + upsample->spare_row = (JSAMPROW) + (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (size_t) (upsample->out_row_width * SIZEOF(JSAMPLE))); + } else { + upsample->pub.upsample = merged_1v_upsample; + upsample->upmethod = h2v1_merged_upsample; + /* No spare row needed */ + upsample->spare_row = NULL; + } + + if (cinfo->jpeg_color_space == JCS_BG_YCC) + build_bg_ycc_rgb_table(cinfo); + else + build_ycc_rgb_table(cinfo); +} + +#endif /* UPSAMPLE_MERGING_SUPPORTED */ diff --git a/compat/libjpeg/jdpostct.c b/compat/libjpeg/jdpostct.c new file mode 100755 index 0000000..7ba9eed --- /dev/null +++ b/compat/libjpeg/jdpostct.c @@ -0,0 +1,290 @@ +/* + * jdpostct.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the decompression postprocessing controller. + * This controller manages the upsampling, color conversion, and color + * quantization/reduction steps; specifically, it controls the buffering + * between upsample/color conversion and color quantization/reduction. + * + * If no color quantization/reduction is required, then this module has no + * work to do, and it just hands off to the upsample/color conversion code. + * An integrated upsample/convert/quantize process would replace this module + * entirely. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Private buffer controller object */ + +typedef struct { + struct jpeg_d_post_controller pub; /* public fields */ + + /* Color quantization source buffer: this holds output data from + * the upsample/color conversion step to be passed to the quantizer. + * For two-pass color quantization, we need a full-image buffer; + * for one-pass operation, a strip buffer is sufficient. + */ + jvirt_sarray_ptr whole_image; /* virtual array, or NULL if one-pass */ + JSAMPARRAY buffer; /* strip buffer, or current strip of virtual */ + JDIMENSION strip_height; /* buffer size in rows */ + /* for two-pass mode only: */ + JDIMENSION starting_row; /* row # of first row in current strip */ + JDIMENSION next_row; /* index of next row to fill/empty in strip */ +} my_post_controller; + +typedef my_post_controller * my_post_ptr; + + +/* Forward declarations */ +METHODDEF(void) post_process_1pass + JPP((j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail)); +#ifdef QUANT_2PASS_SUPPORTED +METHODDEF(void) post_process_prepass + JPP((j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail)); +METHODDEF(void) post_process_2pass + JPP((j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail)); +#endif + + +/* + * Initialize for a processing pass. + */ + +METHODDEF(void) +start_pass_dpost (j_decompress_ptr cinfo, J_BUF_MODE pass_mode) +{ + my_post_ptr post = (my_post_ptr) cinfo->post; + + switch (pass_mode) { + case JBUF_PASS_THRU: + if (cinfo->quantize_colors) { + /* Single-pass processing with color quantization. */ + post->pub.post_process_data = post_process_1pass; + /* We could be doing buffered-image output before starting a 2-pass + * color quantization; in that case, jinit_d_post_controller did not + * allocate a strip buffer. Use the virtual-array buffer as workspace. + */ + if (post->buffer == NULL) { + post->buffer = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, post->whole_image, + (JDIMENSION) 0, post->strip_height, TRUE); + } + } else { + /* For single-pass processing without color quantization, + * I have no work to do; just call the upsampler directly. + */ + post->pub.post_process_data = cinfo->upsample->upsample; + } + break; +#ifdef QUANT_2PASS_SUPPORTED + case JBUF_SAVE_AND_PASS: + /* First pass of 2-pass quantization */ + if (post->whole_image == NULL) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + post->pub.post_process_data = post_process_prepass; + break; + case JBUF_CRANK_DEST: + /* Second pass of 2-pass quantization */ + if (post->whole_image == NULL) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + post->pub.post_process_data = post_process_2pass; + break; +#endif /* QUANT_2PASS_SUPPORTED */ + default: + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + break; + } + post->starting_row = post->next_row = 0; +} + + +/* + * Process some data in the one-pass (strip buffer) case. + * This is used for color precision reduction as well as one-pass quantization. + */ + +METHODDEF(void) +post_process_1pass (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +{ + my_post_ptr post = (my_post_ptr) cinfo->post; + JDIMENSION num_rows, max_rows; + + /* Fill the buffer, but not more than what we can dump out in one go. */ + /* Note we rely on the upsampler to detect bottom of image. */ + max_rows = out_rows_avail - *out_row_ctr; + if (max_rows > post->strip_height) + max_rows = post->strip_height; + num_rows = 0; + (*cinfo->upsample->upsample) (cinfo, + input_buf, in_row_group_ctr, in_row_groups_avail, + post->buffer, &num_rows, max_rows); + /* Quantize and emit data. */ + (*cinfo->cquantize->color_quantize) (cinfo, + post->buffer, output_buf + *out_row_ctr, (int) num_rows); + *out_row_ctr += num_rows; +} + + +#ifdef QUANT_2PASS_SUPPORTED + +/* + * Process some data in the first pass of 2-pass quantization. + */ + +METHODDEF(void) +post_process_prepass (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +{ + my_post_ptr post = (my_post_ptr) cinfo->post; + JDIMENSION old_next_row, num_rows; + + /* Reposition virtual buffer if at start of strip. */ + if (post->next_row == 0) { + post->buffer = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, post->whole_image, + post->starting_row, post->strip_height, TRUE); + } + + /* Upsample some data (up to a strip height's worth). */ + old_next_row = post->next_row; + (*cinfo->upsample->upsample) (cinfo, + input_buf, in_row_group_ctr, in_row_groups_avail, + post->buffer, &post->next_row, post->strip_height); + + /* Allow quantizer to scan new data. No data is emitted, */ + /* but we advance out_row_ctr so outer loop can tell when we're done. */ + if (post->next_row > old_next_row) { + num_rows = post->next_row - old_next_row; + (*cinfo->cquantize->color_quantize) (cinfo, post->buffer + old_next_row, + (JSAMPARRAY) NULL, (int) num_rows); + *out_row_ctr += num_rows; + } + + /* Advance if we filled the strip. */ + if (post->next_row >= post->strip_height) { + post->starting_row += post->strip_height; + post->next_row = 0; + } +} + + +/* + * Process some data in the second pass of 2-pass quantization. + */ + +METHODDEF(void) +post_process_2pass (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +{ + my_post_ptr post = (my_post_ptr) cinfo->post; + JDIMENSION num_rows, max_rows; + + /* Reposition virtual buffer if at start of strip. */ + if (post->next_row == 0) { + post->buffer = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, post->whole_image, + post->starting_row, post->strip_height, FALSE); + } + + /* Determine number of rows to emit. */ + num_rows = post->strip_height - post->next_row; /* available in strip */ + max_rows = out_rows_avail - *out_row_ctr; /* available in output area */ + if (num_rows > max_rows) + num_rows = max_rows; + /* We have to check bottom of image here, can't depend on upsampler. */ + max_rows = cinfo->output_height - post->starting_row; + if (num_rows > max_rows) + num_rows = max_rows; + + /* Quantize and emit data. */ + (*cinfo->cquantize->color_quantize) (cinfo, + post->buffer + post->next_row, output_buf + *out_row_ctr, + (int) num_rows); + *out_row_ctr += num_rows; + + /* Advance if we filled the strip. */ + post->next_row += num_rows; + if (post->next_row >= post->strip_height) { + post->starting_row += post->strip_height; + post->next_row = 0; + } +} + +#endif /* QUANT_2PASS_SUPPORTED */ + + +/* + * Initialize postprocessing controller. + */ + +GLOBAL(void) +jinit_d_post_controller (j_decompress_ptr cinfo, boolean need_full_buffer) +{ + my_post_ptr post; + + post = (my_post_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_post_controller)); + cinfo->post = (struct jpeg_d_post_controller *) post; + post->pub.start_pass = start_pass_dpost; + post->whole_image = NULL; /* flag for no virtual arrays */ + post->buffer = NULL; /* flag for no strip buffer */ + + /* Create the quantization buffer, if needed */ + if (cinfo->quantize_colors) { + /* The buffer strip height is max_v_samp_factor, which is typically + * an efficient number of rows for upsampling to return. + * (In the presence of output rescaling, we might want to be smarter?) + */ + post->strip_height = (JDIMENSION) cinfo->max_v_samp_factor; + if (need_full_buffer) { + /* Two-pass color quantization: need full-image storage. */ + /* We round up the number of rows to a multiple of the strip height. */ +#ifdef QUANT_2PASS_SUPPORTED + post->whole_image = (*cinfo->mem->request_virt_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, + cinfo->output_width * cinfo->out_color_components, + (JDIMENSION) jround_up((long) cinfo->output_height, + (long) post->strip_height), + post->strip_height); +#else + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); +#endif /* QUANT_2PASS_SUPPORTED */ + } else { + /* One-pass color quantization: just make a strip buffer. */ + post->buffer = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + cinfo->output_width * cinfo->out_color_components, + post->strip_height); + } + } +} diff --git a/compat/libjpeg/jdsample.c b/compat/libjpeg/jdsample.c new file mode 100755 index 0000000..83d6332 --- /dev/null +++ b/compat/libjpeg/jdsample.c @@ -0,0 +1,358 @@ +/* + * jdsample.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * Modified 2002-2015 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains upsampling routines. + * + * Upsampling input data is counted in "row groups". A row group + * is defined to be (v_samp_factor * DCT_v_scaled_size / min_DCT_v_scaled_size) + * sample rows of each component. Upsampling will normally produce + * max_v_samp_factor pixel rows from each row group (but this could vary + * if the upsampler is applying a scale factor of its own). + * + * An excellent reference for image resampling is + * Digital Image Warping, George Wolberg, 1990. + * Pub. by IEEE Computer Society Press, Los Alamitos, CA. ISBN 0-8186-8944-7. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Pointer to routine to upsample a single component */ +typedef JMETHOD(void, upsample1_ptr, + (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr)); + +/* Private subobject */ + +typedef struct { + struct jpeg_upsampler pub; /* public fields */ + + /* Color conversion buffer. When using separate upsampling and color + * conversion steps, this buffer holds one upsampled row group until it + * has been color converted and output. + * Note: we do not allocate any storage for component(s) which are full-size, + * ie do not need rescaling. The corresponding entry of color_buf[] is + * simply set to point to the input data array, thereby avoiding copying. + */ + JSAMPARRAY color_buf[MAX_COMPONENTS]; + + /* Per-component upsampling method pointers */ + upsample1_ptr methods[MAX_COMPONENTS]; + + int next_row_out; /* counts rows emitted from color_buf */ + JDIMENSION rows_to_go; /* counts rows remaining in image */ + + /* Height of an input row group for each component. */ + int rowgroup_height[MAX_COMPONENTS]; + + /* These arrays save pixel expansion factors so that int_expand need not + * recompute them each time. They are unused for other upsampling methods. + */ + UINT8 h_expand[MAX_COMPONENTS]; + UINT8 v_expand[MAX_COMPONENTS]; +} my_upsampler; + +typedef my_upsampler * my_upsample_ptr; + + +/* + * Initialize for an upsampling pass. + */ + +METHODDEF(void) +start_pass_upsample (j_decompress_ptr cinfo) +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + + /* Mark the conversion buffer empty */ + upsample->next_row_out = cinfo->max_v_samp_factor; + /* Initialize total-height counter for detecting bottom of image */ + upsample->rows_to_go = cinfo->output_height; +} + + +/* + * Control routine to do upsampling (and color conversion). + * + * In this version we upsample each component independently. + * We upsample one row group into the conversion buffer, then apply + * color conversion a row at a time. + */ + +METHODDEF(void) +sep_upsample (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + int ci; + jpeg_component_info * compptr; + JDIMENSION num_rows; + + /* Fill the conversion buffer, if it's empty */ + if (upsample->next_row_out >= cinfo->max_v_samp_factor) { + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Invoke per-component upsample method. Notice we pass a POINTER + * to color_buf[ci], so that fullsize_upsample can change it. + */ + (*upsample->methods[ci]) (cinfo, compptr, + input_buf[ci] + (*in_row_group_ctr * upsample->rowgroup_height[ci]), + upsample->color_buf + ci); + } + upsample->next_row_out = 0; + } + + /* Color-convert and emit rows */ + + /* How many we have in the buffer: */ + num_rows = (JDIMENSION) (cinfo->max_v_samp_factor - upsample->next_row_out); + /* Not more than the distance to the end of the image. Need this test + * in case the image height is not a multiple of max_v_samp_factor: + */ + if (num_rows > upsample->rows_to_go) + num_rows = upsample->rows_to_go; + /* And not more than what the client can accept: */ + out_rows_avail -= *out_row_ctr; + if (num_rows > out_rows_avail) + num_rows = out_rows_avail; + + (*cinfo->cconvert->color_convert) (cinfo, upsample->color_buf, + (JDIMENSION) upsample->next_row_out, + output_buf + *out_row_ctr, + (int) num_rows); + + /* Adjust counts */ + *out_row_ctr += num_rows; + upsample->rows_to_go -= num_rows; + upsample->next_row_out += num_rows; + /* When the buffer is emptied, declare this input row group consumed */ + if (upsample->next_row_out >= cinfo->max_v_samp_factor) + (*in_row_group_ctr)++; +} + + +/* + * These are the routines invoked by sep_upsample to upsample pixel values + * of a single component. One row group is processed per call. + */ + + +/* + * For full-size components, we just make color_buf[ci] point at the + * input buffer, and thus avoid copying any data. Note that this is + * safe only because sep_upsample doesn't declare the input row group + * "consumed" until we are done color converting and emitting it. + */ + +METHODDEF(void) +fullsize_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) +{ + *output_data_ptr = input_data; +} + + +/* + * This is a no-op version used for "uninteresting" components. + * These components will not be referenced by color conversion. + */ + +METHODDEF(void) +noop_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) +{ + *output_data_ptr = NULL; /* safety check */ +} + + +/* + * This version handles any integral sampling ratios. + * This is not used for typical JPEG files, so it need not be fast. + * Nor, for that matter, is it particularly accurate: the algorithm is + * simple replication of the input pixel onto the corresponding output + * pixels. The hi-falutin sampling literature refers to this as a + * "box filter". A box filter tends to introduce visible artifacts, + * so if you are actually going to use 3:1 or 4:1 sampling ratios + * you would be well advised to improve this code. + */ + +METHODDEF(void) +int_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + JSAMPARRAY output_data = *output_data_ptr; + register JSAMPROW inptr, outptr; + register JSAMPLE invalue; + register int h; + JSAMPROW outend; + int h_expand, v_expand; + int inrow, outrow; + + h_expand = upsample->h_expand[compptr->component_index]; + v_expand = upsample->v_expand[compptr->component_index]; + + inrow = outrow = 0; + while (outrow < cinfo->max_v_samp_factor) { + /* Generate one output row with proper horizontal expansion */ + inptr = input_data[inrow]; + outptr = output_data[outrow]; + outend = outptr + cinfo->output_width; + while (outptr < outend) { + invalue = *inptr++; /* don't need GETJSAMPLE() here */ + for (h = h_expand; h > 0; h--) { + *outptr++ = invalue; + } + } + /* Generate any additional output rows by duplicating the first one */ + if (v_expand > 1) { + jcopy_sample_rows(output_data, outrow, output_data, outrow+1, + v_expand-1, cinfo->output_width); + } + inrow++; + outrow += v_expand; + } +} + + +/* + * Fast processing for the common case of 2:1 horizontal and 1:1 vertical. + * It's still a box filter. + */ + +METHODDEF(void) +h2v1_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) +{ + JSAMPARRAY output_data = *output_data_ptr; + register JSAMPROW inptr, outptr; + register JSAMPLE invalue; + JSAMPROW outend; + int outrow; + + for (outrow = 0; outrow < cinfo->max_v_samp_factor; outrow++) { + inptr = input_data[outrow]; + outptr = output_data[outrow]; + outend = outptr + cinfo->output_width; + while (outptr < outend) { + invalue = *inptr++; /* don't need GETJSAMPLE() here */ + *outptr++ = invalue; + *outptr++ = invalue; + } + } +} + + +/* + * Fast processing for the common case of 2:1 horizontal and 2:1 vertical. + * It's still a box filter. + */ + +METHODDEF(void) +h2v2_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) +{ + JSAMPARRAY output_data = *output_data_ptr; + register JSAMPROW inptr, outptr; + register JSAMPLE invalue; + JSAMPROW outend; + int inrow, outrow; + + inrow = outrow = 0; + while (outrow < cinfo->max_v_samp_factor) { + inptr = input_data[inrow]; + outptr = output_data[outrow]; + outend = outptr + cinfo->output_width; + while (outptr < outend) { + invalue = *inptr++; /* don't need GETJSAMPLE() here */ + *outptr++ = invalue; + *outptr++ = invalue; + } + jcopy_sample_rows(output_data, outrow, output_data, outrow+1, + 1, cinfo->output_width); + inrow++; + outrow += 2; + } +} + + +/* + * Module initialization routine for upsampling. + */ + +GLOBAL(void) +jinit_upsampler (j_decompress_ptr cinfo) +{ + my_upsample_ptr upsample; + int ci; + jpeg_component_info * compptr; + int h_in_group, v_in_group, h_out_group, v_out_group; + + upsample = (my_upsample_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_upsampler)); + cinfo->upsample = &upsample->pub; + upsample->pub.start_pass = start_pass_upsample; + upsample->pub.upsample = sep_upsample; + upsample->pub.need_context_rows = FALSE; /* until we find out differently */ + + if (cinfo->CCIR601_sampling) /* this isn't supported */ + ERREXIT(cinfo, JERR_CCIR601_NOTIMPL); + + /* Verify we can handle the sampling factors, select per-component methods, + * and create storage as needed. + */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Compute size of an "input group" after IDCT scaling. This many samples + * are to be converted to max_h_samp_factor * max_v_samp_factor pixels. + */ + h_in_group = (compptr->h_samp_factor * compptr->DCT_h_scaled_size) / + cinfo->min_DCT_h_scaled_size; + v_in_group = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) / + cinfo->min_DCT_v_scaled_size; + h_out_group = cinfo->max_h_samp_factor; + v_out_group = cinfo->max_v_samp_factor; + upsample->rowgroup_height[ci] = v_in_group; /* save for use later */ + if (! compptr->component_needed) { + /* Don't bother to upsample an uninteresting component. */ + upsample->methods[ci] = noop_upsample; + continue; /* don't need to allocate buffer */ + } + if (h_in_group == h_out_group && v_in_group == v_out_group) { + /* Fullsize components can be processed without any work. */ + upsample->methods[ci] = fullsize_upsample; + continue; /* don't need to allocate buffer */ + } + if (h_in_group * 2 == h_out_group && v_in_group == v_out_group) { + /* Special case for 2h1v upsampling */ + upsample->methods[ci] = h2v1_upsample; + } else if (h_in_group * 2 == h_out_group && + v_in_group * 2 == v_out_group) { + /* Special case for 2h2v upsampling */ + upsample->methods[ci] = h2v2_upsample; + } else if ((h_out_group % h_in_group) == 0 && + (v_out_group % v_in_group) == 0) { + /* Generic integral-factors upsampling method */ + upsample->methods[ci] = int_upsample; + upsample->h_expand[ci] = (UINT8) (h_out_group / h_in_group); + upsample->v_expand[ci] = (UINT8) (v_out_group / v_in_group); + } else + ERREXIT(cinfo, JERR_FRACT_SAMPLE_NOTIMPL); + upsample->color_buf[ci] = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (JDIMENSION) jround_up((long) cinfo->output_width, + (long) cinfo->max_h_samp_factor), + (JDIMENSION) cinfo->max_v_samp_factor); + } +} diff --git a/compat/libjpeg/jdtrans.c b/compat/libjpeg/jdtrans.c new file mode 100755 index 0000000..a51d69d --- /dev/null +++ b/compat/libjpeg/jdtrans.c @@ -0,0 +1,140 @@ +/* + * jdtrans.c + * + * Copyright (C) 1995-1997, Thomas G. Lane. + * Modified 2000-2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains library routines for transcoding decompression, + * that is, reading raw DCT coefficient arrays from an input JPEG file. + * The routines in jdapimin.c will also be needed by a transcoder. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Forward declarations */ +LOCAL(void) transdecode_master_selection JPP((j_decompress_ptr cinfo)); + + +/* + * Read the coefficient arrays from a JPEG file. + * jpeg_read_header must be completed before calling this. + * + * The entire image is read into a set of virtual coefficient-block arrays, + * one per component. The return value is a pointer to the array of + * virtual-array descriptors. These can be manipulated directly via the + * JPEG memory manager, or handed off to jpeg_write_coefficients(). + * To release the memory occupied by the virtual arrays, call + * jpeg_finish_decompress() when done with the data. + * + * An alternative usage is to simply obtain access to the coefficient arrays + * during a buffered-image-mode decompression operation. This is allowed + * after any jpeg_finish_output() call. The arrays can be accessed until + * jpeg_finish_decompress() is called. (Note that any call to the library + * may reposition the arrays, so don't rely on access_virt_barray() results + * to stay valid across library calls.) + * + * Returns NULL if suspended. This case need be checked only if + * a suspending data source is used. + */ + +GLOBAL(jvirt_barray_ptr *) +jpeg_read_coefficients (j_decompress_ptr cinfo) +{ + if (cinfo->global_state == DSTATE_READY) { + /* First call: initialize active modules */ + transdecode_master_selection(cinfo); + cinfo->global_state = DSTATE_RDCOEFS; + } + if (cinfo->global_state == DSTATE_RDCOEFS) { + /* Absorb whole file into the coef buffer */ + for (;;) { + int retcode; + /* Call progress monitor hook if present */ + if (cinfo->progress != NULL) + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + /* Absorb some more input */ + retcode = (*cinfo->inputctl->consume_input) (cinfo); + if (retcode == JPEG_SUSPENDED) + return NULL; + if (retcode == JPEG_REACHED_EOI) + break; + /* Advance progress counter if appropriate */ + if (cinfo->progress != NULL && + (retcode == JPEG_ROW_COMPLETED || retcode == JPEG_REACHED_SOS)) { + if (++cinfo->progress->pass_counter >= cinfo->progress->pass_limit) { + /* startup underestimated number of scans; ratchet up one scan */ + cinfo->progress->pass_limit += (long) cinfo->total_iMCU_rows; + } + } + } + /* Set state so that jpeg_finish_decompress does the right thing */ + cinfo->global_state = DSTATE_STOPPING; + } + /* At this point we should be in state DSTATE_STOPPING if being used + * standalone, or in state DSTATE_BUFIMAGE if being invoked to get access + * to the coefficients during a full buffered-image-mode decompression. + */ + if ((cinfo->global_state == DSTATE_STOPPING || + cinfo->global_state == DSTATE_BUFIMAGE) && cinfo->buffered_image) { + return cinfo->coef->coef_arrays; + } + /* Oops, improper usage */ + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + return NULL; /* keep compiler happy */ +} + + +/* + * Master selection of decompression modules for transcoding. + * This substitutes for jdmaster.c's initialization of the full decompressor. + */ + +LOCAL(void) +transdecode_master_selection (j_decompress_ptr cinfo) +{ + /* This is effectively a buffered-image operation. */ + cinfo->buffered_image = TRUE; + + /* Compute output image dimensions and related values. */ + jpeg_core_output_dimensions(cinfo); + + /* Entropy decoding: either Huffman or arithmetic coding. */ + if (cinfo->arith_code) + jinit_arith_decoder(cinfo); + else { + jinit_huff_decoder(cinfo); + } + + /* Always get a full-image coefficient buffer. */ + jinit_d_coef_controller(cinfo, TRUE); + + /* We can now tell the memory manager to allocate virtual arrays. */ + (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo); + + /* Initialize input side of decompressor to consume first scan. */ + (*cinfo->inputctl->start_input_pass) (cinfo); + + /* Initialize progress monitoring. */ + if (cinfo->progress != NULL) { + int nscans; + /* Estimate number of scans to set pass_limit. */ + if (cinfo->progressive_mode) { + /* Arbitrarily estimate 2 interleaved DC scans + 3 AC scans/component. */ + nscans = 2 + 3 * cinfo->num_components; + } else if (cinfo->inputctl->has_multiple_scans) { + /* For a nonprogressive multiscan file, estimate 1 scan per component. */ + nscans = cinfo->num_components; + } else { + nscans = 1; + } + cinfo->progress->pass_counter = 0L; + cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows * nscans; + cinfo->progress->completed_passes = 0; + cinfo->progress->total_passes = 1; + } +} diff --git a/compat/libjpeg/jerror.c b/compat/libjpeg/jerror.c new file mode 100755 index 0000000..cfaf083 --- /dev/null +++ b/compat/libjpeg/jerror.c @@ -0,0 +1,253 @@ +/* + * jerror.c + * + * Copyright (C) 1991-1998, Thomas G. Lane. + * Modified 2012-2015 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains simple error-reporting and trace-message routines. + * These are suitable for Unix-like systems and others where writing to + * stderr is the right thing to do. Many applications will want to replace + * some or all of these routines. + * + * If you define USE_WINDOWS_MESSAGEBOX in jconfig.h or in the makefile, + * you get a Windows-specific hack to display error messages in a dialog box. + * It ain't much, but it beats dropping error messages into the bit bucket, + * which is what happens to output to stderr under most Windows C compilers. + * + * These routines are used by both the compression and decompression code. + */ + +#ifdef USE_WINDOWS_MESSAGEBOX +#include +#endif + +/* this is not a core library module, so it doesn't define JPEG_INTERNALS */ +#include "jinclude.h" +#include "jpeglib.h" +#include "jversion.h" +#include "jerror.h" + +#ifndef EXIT_FAILURE /* define exit() codes if not provided */ +#define EXIT_FAILURE 1 +#endif + + +/* + * Create the message string table. + * We do this from the master message list in jerror.h by re-reading + * jerror.h with a suitable definition for macro JMESSAGE. + * The message table is made an external symbol just in case any applications + * want to refer to it directly. + */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jpeg_std_message_table jMsgTable +#endif + +#define JMESSAGE(code,string) string , + +const char * const jpeg_std_message_table[] = { +#include "jerror.h" + NULL +}; + + +/* + * Error exit handler: must not return to caller. + * + * Applications may override this if they want to get control back after + * an error. Typically one would longjmp somewhere instead of exiting. + * The setjmp buffer can be made a private field within an expanded error + * handler object. Note that the info needed to generate an error message + * is stored in the error object, so you can generate the message now or + * later, at your convenience. + * You should make sure that the JPEG object is cleaned up (with jpeg_abort + * or jpeg_destroy) at some point. + */ + +METHODDEF(noreturn_t) +error_exit (j_common_ptr cinfo) +{ + /* Always display the message */ + (*cinfo->err->output_message) (cinfo); + + /* Let the memory manager delete any temp files before we die */ + jpeg_destroy(cinfo); + + exit(EXIT_FAILURE); +} + + +/* + * Actual output of an error or trace message. + * Applications may override this method to send JPEG messages somewhere + * other than stderr. + * + * On Windows, printing to stderr is generally completely useless, + * so we provide optional code to produce an error-dialog popup. + * Most Windows applications will still prefer to override this routine, + * but if they don't, it'll do something at least marginally useful. + * + * NOTE: to use the library in an environment that doesn't support the + * C stdio library, you may have to delete the call to fprintf() entirely, + * not just not use this routine. + */ + +METHODDEF(void) +output_message (j_common_ptr cinfo) +{ + char buffer[JMSG_LENGTH_MAX]; + + /* Create the message */ + (*cinfo->err->format_message) (cinfo, buffer); + +#ifdef USE_WINDOWS_MESSAGEBOX + /* Display it in a message dialog box */ + MessageBox(GetActiveWindow(), buffer, "JPEG Library Error", + MB_OK | MB_ICONERROR); +#else + /* Send it to stderr, adding a newline */ + fprintf(stderr, "%s\n", buffer); +#endif +} + + +/* + * Decide whether to emit a trace or warning message. + * msg_level is one of: + * -1: recoverable corrupt-data warning, may want to abort. + * 0: important advisory messages (always display to user). + * 1: first level of tracing detail. + * 2,3,...: successively more detailed tracing messages. + * An application might override this method if it wanted to abort on warnings + * or change the policy about which messages to display. + */ + +METHODDEF(void) +emit_message (j_common_ptr cinfo, int msg_level) +{ + struct jpeg_error_mgr * err = cinfo->err; + + if (msg_level < 0) { + /* It's a warning message. Since corrupt files may generate many warnings, + * the policy implemented here is to show only the first warning, + * unless trace_level >= 3. + */ + if (err->num_warnings == 0 || err->trace_level >= 3) + (*err->output_message) (cinfo); + /* Always count warnings in num_warnings. */ + err->num_warnings++; + } else { + /* It's a trace message. Show it if trace_level >= msg_level. */ + if (err->trace_level >= msg_level) + (*err->output_message) (cinfo); + } +} + + +/* + * Format a message string for the most recent JPEG error or message. + * The message is stored into buffer, which should be at least JMSG_LENGTH_MAX + * characters. Note that no '\n' character is added to the string. + * Few applications should need to override this method. + */ + +METHODDEF(void) +format_message (j_common_ptr cinfo, char * buffer) +{ + struct jpeg_error_mgr * err = cinfo->err; + int msg_code = err->msg_code; + const char * msgtext = NULL; + const char * msgptr; + char ch; + boolean isstring; + + /* Look up message string in proper table */ + if (msg_code > 0 && msg_code <= err->last_jpeg_message) { + msgtext = err->jpeg_message_table[msg_code]; + } else if (err->addon_message_table != NULL && + msg_code >= err->first_addon_message && + msg_code <= err->last_addon_message) { + msgtext = err->addon_message_table[msg_code - err->first_addon_message]; + } + + /* Defend against bogus message number */ + if (msgtext == NULL) { + err->msg_parm.i[0] = msg_code; + msgtext = err->jpeg_message_table[0]; + } + + /* Check for string parameter, as indicated by %s in the message text */ + isstring = FALSE; + msgptr = msgtext; + while ((ch = *msgptr++) != '\0') { + if (ch == '%') { + if (*msgptr == 's') isstring = TRUE; + break; + } + } + + /* Format the message into the passed buffer */ + if (isstring) + sprintf(buffer, msgtext, err->msg_parm.s); + else + sprintf(buffer, msgtext, + err->msg_parm.i[0], err->msg_parm.i[1], + err->msg_parm.i[2], err->msg_parm.i[3], + err->msg_parm.i[4], err->msg_parm.i[5], + err->msg_parm.i[6], err->msg_parm.i[7]); +} + + +/* + * Reset error state variables at start of a new image. + * This is called during compression startup to reset trace/error + * processing to default state, without losing any application-specific + * method pointers. An application might possibly want to override + * this method if it has additional error processing state. + */ + +METHODDEF(void) +reset_error_mgr (j_common_ptr cinfo) +{ + cinfo->err->num_warnings = 0; + /* trace_level is not reset since it is an application-supplied parameter */ + cinfo->err->msg_code = 0; /* may be useful as a flag for "no error" */ +} + + +/* + * Fill in the standard error-handling methods in a jpeg_error_mgr object. + * Typical call is: + * struct jpeg_compress_struct cinfo; + * struct jpeg_error_mgr err; + * + * cinfo.err = jpeg_std_error(&err); + * after which the application may override some of the methods. + */ + +GLOBAL(struct jpeg_error_mgr *) +jpeg_std_error (struct jpeg_error_mgr * err) +{ + err->error_exit = error_exit; + err->emit_message = emit_message; + err->output_message = output_message; + err->format_message = format_message; + err->reset_error_mgr = reset_error_mgr; + + err->trace_level = 0; /* default = no tracing */ + err->num_warnings = 0; /* no warnings emitted yet */ + err->msg_code = 0; /* may be useful as a flag for "no error" */ + + /* Initialize message table pointers */ + err->jpeg_message_table = jpeg_std_message_table; + err->last_jpeg_message = (int) JMSG_LASTMSGCODE - 1; + + err->addon_message_table = NULL; + err->first_addon_message = 0; /* for safety */ + err->last_addon_message = 0; + + return err; +} diff --git a/compat/libjpeg/jerror.h b/compat/libjpeg/jerror.h new file mode 100755 index 0000000..b32da9a --- /dev/null +++ b/compat/libjpeg/jerror.h @@ -0,0 +1,304 @@ +/* + * jerror.h + * + * Copyright (C) 1994-1997, Thomas G. Lane. + * Modified 1997-2012 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file defines the error and message codes for the JPEG library. + * Edit this file to add new codes, or to translate the message strings to + * some other language. + * A set of error-reporting macros are defined too. Some applications using + * the JPEG library may wish to include this file to get the error codes + * and/or the macros. + */ + +/* + * To define the enum list of message codes, include this file without + * defining macro JMESSAGE. To create a message string table, include it + * again with a suitable JMESSAGE definition (see jerror.c for an example). + */ +#ifndef JMESSAGE +#ifndef JERROR_H +/* First time through, define the enum list */ +#define JMAKE_ENUM_LIST +#else +/* Repeated inclusions of this file are no-ops unless JMESSAGE is defined */ +#define JMESSAGE(code,string) +#endif /* JERROR_H */ +#endif /* JMESSAGE */ + +#ifdef JMAKE_ENUM_LIST + +typedef enum { + +#define JMESSAGE(code,string) code , + +#endif /* JMAKE_ENUM_LIST */ + +JMESSAGE(JMSG_NOMESSAGE, "Bogus message code %d") /* Must be first entry! */ + +/* For maintenance convenience, list is alphabetical by message code name */ +JMESSAGE(JERR_BAD_ALIGN_TYPE, "ALIGN_TYPE is wrong, please fix") +JMESSAGE(JERR_BAD_ALLOC_CHUNK, "MAX_ALLOC_CHUNK is wrong, please fix") +JMESSAGE(JERR_BAD_BUFFER_MODE, "Bogus buffer control mode") +JMESSAGE(JERR_BAD_COMPONENT_ID, "Invalid component ID %d in SOS") +JMESSAGE(JERR_BAD_CROP_SPEC, "Invalid crop request") +JMESSAGE(JERR_BAD_DCT_COEF, "DCT coefficient out of range") +JMESSAGE(JERR_BAD_DCTSIZE, "DCT scaled block size %dx%d not supported") +JMESSAGE(JERR_BAD_DROP_SAMPLING, + "Component index %d: mismatching sampling ratio %d:%d, %d:%d, %c") +JMESSAGE(JERR_BAD_HUFF_TABLE, "Bogus Huffman table definition") +JMESSAGE(JERR_BAD_IN_COLORSPACE, "Bogus input colorspace") +JMESSAGE(JERR_BAD_J_COLORSPACE, "Bogus JPEG colorspace") +JMESSAGE(JERR_BAD_LENGTH, "Bogus marker length") +JMESSAGE(JERR_BAD_LIB_VERSION, + "Wrong JPEG library version: library is %d, caller expects %d") +JMESSAGE(JERR_BAD_MCU_SIZE, "Sampling factors too large for interleaved scan") +JMESSAGE(JERR_BAD_POOL_ID, "Invalid memory pool code %d") +JMESSAGE(JERR_BAD_PRECISION, "Unsupported JPEG data precision %d") +JMESSAGE(JERR_BAD_PROGRESSION, + "Invalid progressive parameters Ss=%d Se=%d Ah=%d Al=%d") +JMESSAGE(JERR_BAD_PROG_SCRIPT, + "Invalid progressive parameters at scan script entry %d") +JMESSAGE(JERR_BAD_SAMPLING, "Bogus sampling factors") +JMESSAGE(JERR_BAD_SCAN_SCRIPT, "Invalid scan script at entry %d") +JMESSAGE(JERR_BAD_STATE, "Improper call to JPEG library in state %d") +JMESSAGE(JERR_BAD_STRUCT_SIZE, + "JPEG parameter struct mismatch: library thinks size is %u, caller expects %u") +JMESSAGE(JERR_BAD_VIRTUAL_ACCESS, "Bogus virtual array access") +JMESSAGE(JERR_BUFFER_SIZE, "Buffer passed to JPEG library is too small") +JMESSAGE(JERR_CANT_SUSPEND, "Suspension not allowed here") +JMESSAGE(JERR_CCIR601_NOTIMPL, "CCIR601 sampling not implemented yet") +JMESSAGE(JERR_COMPONENT_COUNT, "Too many color components: %d, max %d") +JMESSAGE(JERR_CONVERSION_NOTIMPL, "Unsupported color conversion request") +JMESSAGE(JERR_DAC_INDEX, "Bogus DAC index %d") +JMESSAGE(JERR_DAC_VALUE, "Bogus DAC value 0x%x") +JMESSAGE(JERR_DHT_INDEX, "Bogus DHT index %d") +JMESSAGE(JERR_DQT_INDEX, "Bogus DQT index %d") +JMESSAGE(JERR_EMPTY_IMAGE, "Empty JPEG image (DNL not supported)") +JMESSAGE(JERR_EMS_READ, "Read from EMS failed") +JMESSAGE(JERR_EMS_WRITE, "Write to EMS failed") +JMESSAGE(JERR_EOI_EXPECTED, "Didn't expect more than one scan") +JMESSAGE(JERR_FILE_READ, "Input file read error") +JMESSAGE(JERR_FILE_WRITE, "Output file write error --- out of disk space?") +JMESSAGE(JERR_FRACT_SAMPLE_NOTIMPL, "Fractional sampling not implemented yet") +JMESSAGE(JERR_HUFF_CLEN_OVERFLOW, "Huffman code size table overflow") +JMESSAGE(JERR_HUFF_MISSING_CODE, "Missing Huffman code table entry") +JMESSAGE(JERR_IMAGE_TOO_BIG, "Maximum supported image dimension is %u pixels") +JMESSAGE(JERR_INPUT_EMPTY, "Empty input file") +JMESSAGE(JERR_INPUT_EOF, "Premature end of input file") +JMESSAGE(JERR_MISMATCHED_QUANT_TABLE, + "Cannot transcode due to multiple use of quantization table %d") +JMESSAGE(JERR_MISSING_DATA, "Scan script does not transmit all data") +JMESSAGE(JERR_MODE_CHANGE, "Invalid color quantization mode change") +JMESSAGE(JERR_NOTIMPL, "Not implemented yet") +JMESSAGE(JERR_NOT_COMPILED, "Requested feature was omitted at compile time") +JMESSAGE(JERR_NO_ARITH_TABLE, "Arithmetic table 0x%02x was not defined") +JMESSAGE(JERR_NO_BACKING_STORE, "Backing store not supported") +JMESSAGE(JERR_NO_HUFF_TABLE, "Huffman table 0x%02x was not defined") +JMESSAGE(JERR_NO_IMAGE, "JPEG datastream contains no image") +JMESSAGE(JERR_NO_QUANT_TABLE, "Quantization table 0x%02x was not defined") +JMESSAGE(JERR_NO_SOI, "Not a JPEG file: starts with 0x%02x 0x%02x") +JMESSAGE(JERR_OUT_OF_MEMORY, "Insufficient memory (case %d)") +JMESSAGE(JERR_QUANT_COMPONENTS, + "Cannot quantize more than %d color components") +JMESSAGE(JERR_QUANT_FEW_COLORS, "Cannot quantize to fewer than %d colors") +JMESSAGE(JERR_QUANT_MANY_COLORS, "Cannot quantize to more than %d colors") +JMESSAGE(JERR_SOF_BEFORE, "Invalid JPEG file structure: %s before SOF") +JMESSAGE(JERR_SOF_DUPLICATE, "Invalid JPEG file structure: two SOF markers") +JMESSAGE(JERR_SOF_NO_SOS, "Invalid JPEG file structure: missing SOS marker") +JMESSAGE(JERR_SOF_UNSUPPORTED, "Unsupported JPEG process: SOF type 0x%02x") +JMESSAGE(JERR_SOI_DUPLICATE, "Invalid JPEG file structure: two SOI markers") +JMESSAGE(JERR_TFILE_CREATE, "Failed to create temporary file %s") +JMESSAGE(JERR_TFILE_READ, "Read failed on temporary file") +JMESSAGE(JERR_TFILE_SEEK, "Seek failed on temporary file") +JMESSAGE(JERR_TFILE_WRITE, + "Write failed on temporary file --- out of disk space?") +JMESSAGE(JERR_TOO_LITTLE_DATA, "Application transferred too few scanlines") +JMESSAGE(JERR_UNKNOWN_MARKER, "Unsupported marker type 0x%02x") +JMESSAGE(JERR_VIRTUAL_BUG, "Virtual array controller messed up") +JMESSAGE(JERR_WIDTH_OVERFLOW, "Image too wide for this implementation") +JMESSAGE(JERR_XMS_READ, "Read from XMS failed") +JMESSAGE(JERR_XMS_WRITE, "Write to XMS failed") +JMESSAGE(JMSG_COPYRIGHT, JCOPYRIGHT) +JMESSAGE(JMSG_VERSION, JVERSION) +JMESSAGE(JTRC_16BIT_TABLES, + "Caution: quantization tables are too coarse for baseline JPEG") +JMESSAGE(JTRC_ADOBE, + "Adobe APP14 marker: version %d, flags 0x%04x 0x%04x, transform %d") +JMESSAGE(JTRC_APP0, "Unknown APP0 marker (not JFIF), length %u") +JMESSAGE(JTRC_APP14, "Unknown APP14 marker (not Adobe), length %u") +JMESSAGE(JTRC_DAC, "Define Arithmetic Table 0x%02x: 0x%02x") +JMESSAGE(JTRC_DHT, "Define Huffman Table 0x%02x") +JMESSAGE(JTRC_DQT, "Define Quantization Table %d precision %d") +JMESSAGE(JTRC_DRI, "Define Restart Interval %u") +JMESSAGE(JTRC_EMS_CLOSE, "Freed EMS handle %u") +JMESSAGE(JTRC_EMS_OPEN, "Obtained EMS handle %u") +JMESSAGE(JTRC_EOI, "End Of Image") +JMESSAGE(JTRC_HUFFBITS, " %3d %3d %3d %3d %3d %3d %3d %3d") +JMESSAGE(JTRC_JFIF, "JFIF APP0 marker: version %d.%02d, density %dx%d %d") +JMESSAGE(JTRC_JFIF_BADTHUMBNAILSIZE, + "Warning: thumbnail image size does not match data length %u") +JMESSAGE(JTRC_JFIF_EXTENSION, + "JFIF extension marker: type 0x%02x, length %u") +JMESSAGE(JTRC_JFIF_THUMBNAIL, " with %d x %d thumbnail image") +JMESSAGE(JTRC_MISC_MARKER, "Miscellaneous marker 0x%02x, length %u") +JMESSAGE(JTRC_PARMLESS_MARKER, "Unexpected marker 0x%02x") +JMESSAGE(JTRC_QUANTVALS, " %4u %4u %4u %4u %4u %4u %4u %4u") +JMESSAGE(JTRC_QUANT_3_NCOLORS, "Quantizing to %d = %d*%d*%d colors") +JMESSAGE(JTRC_QUANT_NCOLORS, "Quantizing to %d colors") +JMESSAGE(JTRC_QUANT_SELECTED, "Selected %d colors for quantization") +JMESSAGE(JTRC_RECOVERY_ACTION, "At marker 0x%02x, recovery action %d") +JMESSAGE(JTRC_RST, "RST%d") +JMESSAGE(JTRC_SMOOTH_NOTIMPL, + "Smoothing not supported with nonstandard sampling ratios") +JMESSAGE(JTRC_SOF, "Start Of Frame 0x%02x: width=%u, height=%u, components=%d") +JMESSAGE(JTRC_SOF_COMPONENT, " Component %d: %dhx%dv q=%d") +JMESSAGE(JTRC_SOI, "Start of Image") +JMESSAGE(JTRC_SOS, "Start Of Scan: %d components") +JMESSAGE(JTRC_SOS_COMPONENT, " Component %d: dc=%d ac=%d") +JMESSAGE(JTRC_SOS_PARAMS, " Ss=%d, Se=%d, Ah=%d, Al=%d") +JMESSAGE(JTRC_TFILE_CLOSE, "Closed temporary file %s") +JMESSAGE(JTRC_TFILE_OPEN, "Opened temporary file %s") +JMESSAGE(JTRC_THUMB_JPEG, + "JFIF extension marker: JPEG-compressed thumbnail image, length %u") +JMESSAGE(JTRC_THUMB_PALETTE, + "JFIF extension marker: palette thumbnail image, length %u") +JMESSAGE(JTRC_THUMB_RGB, + "JFIF extension marker: RGB thumbnail image, length %u") +JMESSAGE(JTRC_UNKNOWN_IDS, + "Unrecognized component IDs %d %d %d, assuming YCbCr") +JMESSAGE(JTRC_XMS_CLOSE, "Freed XMS handle %u") +JMESSAGE(JTRC_XMS_OPEN, "Obtained XMS handle %u") +JMESSAGE(JWRN_ADOBE_XFORM, "Unknown Adobe color transform code %d") +JMESSAGE(JWRN_ARITH_BAD_CODE, "Corrupt JPEG data: bad arithmetic code") +JMESSAGE(JWRN_BOGUS_PROGRESSION, + "Inconsistent progression sequence for component %d coefficient %d") +JMESSAGE(JWRN_EXTRANEOUS_DATA, + "Corrupt JPEG data: %u extraneous bytes before marker 0x%02x") +JMESSAGE(JWRN_HIT_MARKER, "Corrupt JPEG data: premature end of data segment") +JMESSAGE(JWRN_HUFF_BAD_CODE, "Corrupt JPEG data: bad Huffman code") +JMESSAGE(JWRN_JFIF_MAJOR, "Warning: unknown JFIF revision number %d.%02d") +JMESSAGE(JWRN_JPEG_EOF, "Premature end of JPEG file") +JMESSAGE(JWRN_MUST_RESYNC, + "Corrupt JPEG data: found marker 0x%02x instead of RST%d") +JMESSAGE(JWRN_NOT_SEQUENTIAL, "Invalid SOS parameters for sequential JPEG") +JMESSAGE(JWRN_TOO_MUCH_DATA, "Application transferred too many scanlines") + +#ifdef JMAKE_ENUM_LIST + + JMSG_LASTMSGCODE +} J_MESSAGE_CODE; + +#undef JMAKE_ENUM_LIST +#endif /* JMAKE_ENUM_LIST */ + +/* Zap JMESSAGE macro so that future re-inclusions do nothing by default */ +#undef JMESSAGE + + +#ifndef JERROR_H +#define JERROR_H + +/* Macros to simplify using the error and trace message stuff */ +/* The first parameter is either type of cinfo pointer */ + +/* Fatal errors (print message and exit) */ +#define ERREXIT(cinfo,code) \ + ((cinfo)->err->msg_code = (code), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXIT1(cinfo,code,p1) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXIT2(cinfo,code,p1,p2) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXIT3(cinfo,code,p1,p2,p3) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (cinfo)->err->msg_parm.i[2] = (p3), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXIT4(cinfo,code,p1,p2,p3,p4) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (cinfo)->err->msg_parm.i[2] = (p3), \ + (cinfo)->err->msg_parm.i[3] = (p4), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXIT6(cinfo,code,p1,p2,p3,p4,p5,p6) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (cinfo)->err->msg_parm.i[2] = (p3), \ + (cinfo)->err->msg_parm.i[3] = (p4), \ + (cinfo)->err->msg_parm.i[4] = (p5), \ + (cinfo)->err->msg_parm.i[5] = (p6), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXITS(cinfo,code,str) \ + ((cinfo)->err->msg_code = (code), \ + strncpy((cinfo)->err->msg_parm.s, (str), JMSG_STR_PARM_MAX), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) + +#define MAKESTMT(stuff) do { stuff } while (0) + +/* Nonfatal errors (we can keep going, but the data is probably corrupt) */ +#define WARNMS(cinfo,code) \ + ((cinfo)->err->msg_code = (code), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1)) +#define WARNMS1(cinfo,code,p1) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1)) +#define WARNMS2(cinfo,code,p1,p2) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1)) + +/* Informational/debugging messages */ +#define TRACEMS(cinfo,lvl,code) \ + ((cinfo)->err->msg_code = (code), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) +#define TRACEMS1(cinfo,lvl,code,p1) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) +#define TRACEMS2(cinfo,lvl,code,p1,p2) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) +#define TRACEMS3(cinfo,lvl,code,p1,p2,p3) \ + MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ + _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); \ + (cinfo)->err->msg_code = (code); \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) +#define TRACEMS4(cinfo,lvl,code,p1,p2,p3,p4) \ + MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ + _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \ + (cinfo)->err->msg_code = (code); \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) +#define TRACEMS5(cinfo,lvl,code,p1,p2,p3,p4,p5) \ + MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ + _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \ + _mp[4] = (p5); \ + (cinfo)->err->msg_code = (code); \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) +#define TRACEMS8(cinfo,lvl,code,p1,p2,p3,p4,p5,p6,p7,p8) \ + MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ + _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \ + _mp[4] = (p5); _mp[5] = (p6); _mp[6] = (p7); _mp[7] = (p8); \ + (cinfo)->err->msg_code = (code); \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) +#define TRACEMSS(cinfo,lvl,code,str) \ + ((cinfo)->err->msg_code = (code), \ + strncpy((cinfo)->err->msg_parm.s, (str), JMSG_STR_PARM_MAX), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) + +#endif /* JERROR_H */ diff --git a/compat/libjpeg/jfdctflt.c b/compat/libjpeg/jfdctflt.c new file mode 100755 index 0000000..0cc0540 --- /dev/null +++ b/compat/libjpeg/jfdctflt.c @@ -0,0 +1,176 @@ +/* + * jfdctflt.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2003-2015 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a floating-point implementation of the + * forward DCT (Discrete Cosine Transform). + * + * This implementation should be more accurate than either of the integer + * DCT implementations. However, it may not give the same results on all + * machines because of differences in roundoff behavior. Speed will depend + * on the hardware's floating point capacity. + * + * A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT + * on each column. Direct algorithms are also available, but they are + * much more complex and seem not to be any faster when reduced to code. + * + * This implementation is based on Arai, Agui, and Nakajima's algorithm for + * scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in + * Japanese, but the algorithm is described in the Pennebaker & Mitchell + * JPEG textbook (see REFERENCES section in file README). The following code + * is based directly on figure 4-8 in P&M. + * While an 8-point DCT cannot be done in less than 11 multiplies, it is + * possible to arrange the computation so that many of the multiplies are + * simple scalings of the final outputs. These multiplies can then be + * folded into the multiplications or divisions by the JPEG quantization + * table entries. The AA&N method leaves only 5 multiplies and 29 adds + * to be done in the DCT itself. + * The primary disadvantage of this method is that with a fixed-point + * implementation, accuracy is lost due to imprecise representation of the + * scaled quantization values. However, that problem does not arise if + * we use floating point arithmetic. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + +#ifdef DCT_FLOAT_SUPPORTED + + +/* + * This module is specialized to the case DCTSIZE = 8. + */ + +#if DCTSIZE != 8 + Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ +#endif + + +/* + * Perform the forward DCT on one block of samples. + * + * cK represents cos(K*pi/16). + */ + +GLOBAL(void) +jpeg_fdct_float (FAST_FLOAT * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + FAST_FLOAT tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; + FAST_FLOAT tmp10, tmp11, tmp12, tmp13; + FAST_FLOAT z1, z2, z3, z4, z5, z11, z13; + FAST_FLOAT *dataptr; + JSAMPROW elemptr; + int ctr; + + /* Pass 1: process rows. */ + + dataptr = data; + for (ctr = 0; ctr < DCTSIZE; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Load data into workspace */ + tmp0 = (FAST_FLOAT) (GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[7])); + tmp7 = (FAST_FLOAT) (GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[7])); + tmp1 = (FAST_FLOAT) (GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[6])); + tmp6 = (FAST_FLOAT) (GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[6])); + tmp2 = (FAST_FLOAT) (GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[5])); + tmp5 = (FAST_FLOAT) (GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[5])); + tmp3 = (FAST_FLOAT) (GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[4])); + tmp4 = (FAST_FLOAT) (GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[4])); + + /* Even part */ + + tmp10 = tmp0 + tmp3; /* phase 2 */ + tmp13 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp12 = tmp1 - tmp2; + + /* Apply unsigned->signed conversion. */ + dataptr[0] = tmp10 + tmp11 - 8 * CENTERJSAMPLE; /* phase 3 */ + dataptr[4] = tmp10 - tmp11; + + z1 = (tmp12 + tmp13) * ((FAST_FLOAT) 0.707106781); /* c4 */ + dataptr[2] = tmp13 + z1; /* phase 5 */ + dataptr[6] = tmp13 - z1; + + /* Odd part */ + + tmp10 = tmp4 + tmp5; /* phase 2 */ + tmp11 = tmp5 + tmp6; + tmp12 = tmp6 + tmp7; + + /* The rotator is modified from fig 4-8 to avoid extra negations. */ + z5 = (tmp10 - tmp12) * ((FAST_FLOAT) 0.382683433); /* c6 */ + z2 = ((FAST_FLOAT) 0.541196100) * tmp10 + z5; /* c2-c6 */ + z4 = ((FAST_FLOAT) 1.306562965) * tmp12 + z5; /* c2+c6 */ + z3 = tmp11 * ((FAST_FLOAT) 0.707106781); /* c4 */ + + z11 = tmp7 + z3; /* phase 5 */ + z13 = tmp7 - z3; + + dataptr[5] = z13 + z2; /* phase 6 */ + dataptr[3] = z13 - z2; + dataptr[1] = z11 + z4; + dataptr[7] = z11 - z4; + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. */ + + dataptr = data; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7]; + tmp7 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6]; + tmp6 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5]; + tmp5 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; + tmp4 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; + + /* Even part */ + + tmp10 = tmp0 + tmp3; /* phase 2 */ + tmp13 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp12 = tmp1 - tmp2; + + dataptr[DCTSIZE*0] = tmp10 + tmp11; /* phase 3 */ + dataptr[DCTSIZE*4] = tmp10 - tmp11; + + z1 = (tmp12 + tmp13) * ((FAST_FLOAT) 0.707106781); /* c4 */ + dataptr[DCTSIZE*2] = tmp13 + z1; /* phase 5 */ + dataptr[DCTSIZE*6] = tmp13 - z1; + + /* Odd part */ + + tmp10 = tmp4 + tmp5; /* phase 2 */ + tmp11 = tmp5 + tmp6; + tmp12 = tmp6 + tmp7; + + /* The rotator is modified from fig 4-8 to avoid extra negations. */ + z5 = (tmp10 - tmp12) * ((FAST_FLOAT) 0.382683433); /* c6 */ + z2 = ((FAST_FLOAT) 0.541196100) * tmp10 + z5; /* c2-c6 */ + z4 = ((FAST_FLOAT) 1.306562965) * tmp12 + z5; /* c2+c6 */ + z3 = tmp11 * ((FAST_FLOAT) 0.707106781); /* c4 */ + + z11 = tmp7 + z3; /* phase 5 */ + z13 = tmp7 - z3; + + dataptr[DCTSIZE*5] = z13 + z2; /* phase 6 */ + dataptr[DCTSIZE*3] = z13 - z2; + dataptr[DCTSIZE*1] = z11 + z4; + dataptr[DCTSIZE*7] = z11 - z4; + + dataptr++; /* advance pointer to next column */ + } +} + +#endif /* DCT_FLOAT_SUPPORTED */ diff --git a/compat/libjpeg/jfdctfst.c b/compat/libjpeg/jfdctfst.c new file mode 100755 index 0000000..173d0d6 --- /dev/null +++ b/compat/libjpeg/jfdctfst.c @@ -0,0 +1,232 @@ +/* + * jfdctfst.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2003-2015 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a fast, not so accurate integer implementation of the + * forward DCT (Discrete Cosine Transform). + * + * A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT + * on each column. Direct algorithms are also available, but they are + * much more complex and seem not to be any faster when reduced to code. + * + * This implementation is based on Arai, Agui, and Nakajima's algorithm for + * scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in + * Japanese, but the algorithm is described in the Pennebaker & Mitchell + * JPEG textbook (see REFERENCES section in file README). The following code + * is based directly on figure 4-8 in P&M. + * While an 8-point DCT cannot be done in less than 11 multiplies, it is + * possible to arrange the computation so that many of the multiplies are + * simple scalings of the final outputs. These multiplies can then be + * folded into the multiplications or divisions by the JPEG quantization + * table entries. The AA&N method leaves only 5 multiplies and 29 adds + * to be done in the DCT itself. + * The primary disadvantage of this method is that with fixed-point math, + * accuracy is lost due to imprecise representation of the scaled + * quantization values. The smaller the quantization table entry, the less + * precise the scaled value, so this implementation does worse with high- + * quality-setting files than with low-quality ones. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + +#ifdef DCT_IFAST_SUPPORTED + + +/* + * This module is specialized to the case DCTSIZE = 8. + */ + +#if DCTSIZE != 8 + Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ +#endif + + +/* Scaling decisions are generally the same as in the LL&M algorithm; + * see jfdctint.c for more details. However, we choose to descale + * (right shift) multiplication products as soon as they are formed, + * rather than carrying additional fractional bits into subsequent additions. + * This compromises accuracy slightly, but it lets us save a few shifts. + * More importantly, 16-bit arithmetic is then adequate (for 8-bit samples) + * everywhere except in the multiplications proper; this saves a good deal + * of work on 16-bit-int machines. + * + * Again to save a few shifts, the intermediate results between pass 1 and + * pass 2 are not upscaled, but are represented only to integral precision. + * + * A final compromise is to represent the multiplicative constants to only + * 8 fractional bits, rather than 13. This saves some shifting work on some + * machines, and may also reduce the cost of multiplication (since there + * are fewer one-bits in the constants). + */ + +#define CONST_BITS 8 + + +/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus + * causing a lot of useless floating-point operations at run time. + * To get around this we use the following pre-calculated constants. + * If you change CONST_BITS you may want to add appropriate values. + * (With a reasonable C compiler, you can just rely on the FIX() macro...) + */ + +#if CONST_BITS == 8 +#define FIX_0_382683433 ((INT32) 98) /* FIX(0.382683433) */ +#define FIX_0_541196100 ((INT32) 139) /* FIX(0.541196100) */ +#define FIX_0_707106781 ((INT32) 181) /* FIX(0.707106781) */ +#define FIX_1_306562965 ((INT32) 334) /* FIX(1.306562965) */ +#else +#define FIX_0_382683433 FIX(0.382683433) +#define FIX_0_541196100 FIX(0.541196100) +#define FIX_0_707106781 FIX(0.707106781) +#define FIX_1_306562965 FIX(1.306562965) +#endif + + +/* We can gain a little more speed, with a further compromise in accuracy, + * by omitting the addition in a descaling shift. This yields an incorrectly + * rounded result half the time... + */ + +#ifndef USE_ACCURATE_ROUNDING +#undef DESCALE +#define DESCALE(x,n) RIGHT_SHIFT(x, n) +#endif + + +/* Multiply a DCTELEM variable by an INT32 constant, and immediately + * descale to yield a DCTELEM result. + */ + +#define MULTIPLY(var,const) ((DCTELEM) DESCALE((var) * (const), CONST_BITS)) + + +/* + * Perform the forward DCT on one block of samples. + * + * cK represents cos(K*pi/16). + */ + +GLOBAL(void) +jpeg_fdct_ifast (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + DCTELEM tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; + DCTELEM tmp10, tmp11, tmp12, tmp13; + DCTELEM z1, z2, z3, z4, z5, z11, z13; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. */ + + dataptr = data; + for (ctr = 0; ctr < DCTSIZE; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Load data into workspace */ + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[7]); + tmp7 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[7]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[6]); + tmp6 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[6]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[5]); + tmp5 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[5]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[4]); + tmp4 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[4]); + + /* Even part */ + + tmp10 = tmp0 + tmp3; /* phase 2 */ + tmp13 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp12 = tmp1 - tmp2; + + /* Apply unsigned->signed conversion. */ + dataptr[0] = tmp10 + tmp11 - 8 * CENTERJSAMPLE; /* phase 3 */ + dataptr[4] = tmp10 - tmp11; + + z1 = MULTIPLY(tmp12 + tmp13, FIX_0_707106781); /* c4 */ + dataptr[2] = tmp13 + z1; /* phase 5 */ + dataptr[6] = tmp13 - z1; + + /* Odd part */ + + tmp10 = tmp4 + tmp5; /* phase 2 */ + tmp11 = tmp5 + tmp6; + tmp12 = tmp6 + tmp7; + + /* The rotator is modified from fig 4-8 to avoid extra negations. */ + z5 = MULTIPLY(tmp10 - tmp12, FIX_0_382683433); /* c6 */ + z2 = MULTIPLY(tmp10, FIX_0_541196100) + z5; /* c2-c6 */ + z4 = MULTIPLY(tmp12, FIX_1_306562965) + z5; /* c2+c6 */ + z3 = MULTIPLY(tmp11, FIX_0_707106781); /* c4 */ + + z11 = tmp7 + z3; /* phase 5 */ + z13 = tmp7 - z3; + + dataptr[5] = z13 + z2; /* phase 6 */ + dataptr[3] = z13 - z2; + dataptr[1] = z11 + z4; + dataptr[7] = z11 - z4; + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. */ + + dataptr = data; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7]; + tmp7 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6]; + tmp6 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5]; + tmp5 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; + tmp4 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; + + /* Even part */ + + tmp10 = tmp0 + tmp3; /* phase 2 */ + tmp13 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp12 = tmp1 - tmp2; + + dataptr[DCTSIZE*0] = tmp10 + tmp11; /* phase 3 */ + dataptr[DCTSIZE*4] = tmp10 - tmp11; + + z1 = MULTIPLY(tmp12 + tmp13, FIX_0_707106781); /* c4 */ + dataptr[DCTSIZE*2] = tmp13 + z1; /* phase 5 */ + dataptr[DCTSIZE*6] = tmp13 - z1; + + /* Odd part */ + + tmp10 = tmp4 + tmp5; /* phase 2 */ + tmp11 = tmp5 + tmp6; + tmp12 = tmp6 + tmp7; + + /* The rotator is modified from fig 4-8 to avoid extra negations. */ + z5 = MULTIPLY(tmp10 - tmp12, FIX_0_382683433); /* c6 */ + z2 = MULTIPLY(tmp10, FIX_0_541196100) + z5; /* c2-c6 */ + z4 = MULTIPLY(tmp12, FIX_1_306562965) + z5; /* c2+c6 */ + z3 = MULTIPLY(tmp11, FIX_0_707106781); /* c4 */ + + z11 = tmp7 + z3; /* phase 5 */ + z13 = tmp7 - z3; + + dataptr[DCTSIZE*5] = z13 + z2; /* phase 6 */ + dataptr[DCTSIZE*3] = z13 - z2; + dataptr[DCTSIZE*1] = z11 + z4; + dataptr[DCTSIZE*7] = z11 - z4; + + dataptr++; /* advance pointer to next column */ + } +} + +#endif /* DCT_IFAST_SUPPORTED */ diff --git a/compat/libjpeg/jfdctint.c b/compat/libjpeg/jfdctint.c new file mode 100755 index 0000000..6700fdd --- /dev/null +++ b/compat/libjpeg/jfdctint.c @@ -0,0 +1,4409 @@ +/* + * jfdctint.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * Modification developed 2003-2015 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a slow-but-accurate integer implementation of the + * forward DCT (Discrete Cosine Transform). + * + * A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT + * on each column. Direct algorithms are also available, but they are + * much more complex and seem not to be any faster when reduced to code. + * + * This implementation is based on an algorithm described in + * C. Loeffler, A. Ligtenberg and G. Moschytz, "Practical Fast 1-D DCT + * Algorithms with 11 Multiplications", Proc. Int'l. Conf. on Acoustics, + * Speech, and Signal Processing 1989 (ICASSP '89), pp. 988-991. + * The primary algorithm described there uses 11 multiplies and 29 adds. + * We use their alternate method with 12 multiplies and 32 adds. + * The advantage of this method is that no data path contains more than one + * multiplication; this allows a very simple and accurate implementation in + * scaled fixed-point arithmetic, with a minimal number of shifts. + * + * We also provide FDCT routines with various input sample block sizes for + * direct resolution reduction or enlargement and for direct resolving the + * common 2x1 and 1x2 subsampling cases without additional resampling: NxN + * (N=1...16), 2NxN, and Nx2N (N=1...8) pixels for one 8x8 output DCT block. + * + * For N<8 we fill the remaining block coefficients with zero. + * For N>8 we apply a partial N-point FDCT on the input samples, computing + * just the lower 8 frequency coefficients and discarding the rest. + * + * We must scale the output coefficients of the N-point FDCT appropriately + * to the standard 8-point FDCT level by 8/N per 1-D pass. This scaling + * is folded into the constant multipliers (pass 2) and/or final/initial + * shifting. + * + * CAUTION: We rely on the FIX() macro except for the N=1,2,4,8 cases + * since there would be too many additional constants to pre-calculate. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + +#ifdef DCT_ISLOW_SUPPORTED + + +/* + * This module is specialized to the case DCTSIZE = 8. + */ + +#if DCTSIZE != 8 + Sorry, this code only copes with 8x8 DCT blocks. /* deliberate syntax err */ +#endif + + +/* + * The poop on this scaling stuff is as follows: + * + * Each 1-D DCT step produces outputs which are a factor of sqrt(N) + * larger than the true DCT outputs. The final outputs are therefore + * a factor of N larger than desired; since N=8 this can be cured by + * a simple right shift at the end of the algorithm. The advantage of + * this arrangement is that we save two multiplications per 1-D DCT, + * because the y0 and y4 outputs need not be divided by sqrt(N). + * In the IJG code, this factor of 8 is removed by the quantization step + * (in jcdctmgr.c), NOT in this module. + * + * We have to do addition and subtraction of the integer inputs, which + * is no problem, and multiplication by fractional constants, which is + * a problem to do in integer arithmetic. We multiply all the constants + * by CONST_SCALE and convert them to integer constants (thus retaining + * CONST_BITS bits of precision in the constants). After doing a + * multiplication we have to divide the product by CONST_SCALE, with proper + * rounding, to produce the correct output. This division can be done + * cheaply as a right shift of CONST_BITS bits. We postpone shifting + * as long as possible so that partial sums can be added together with + * full fractional precision. + * + * The outputs of the first pass are scaled up by PASS1_BITS bits so that + * they are represented to better-than-integral precision. These outputs + * require BITS_IN_JSAMPLE + PASS1_BITS + 3 bits; this fits in a 16-bit word + * with the recommended scaling. (For 12-bit sample data, the intermediate + * array is INT32 anyway.) + * + * To avoid overflow of the 32-bit intermediate results in pass 2, we must + * have BITS_IN_JSAMPLE + CONST_BITS + PASS1_BITS <= 26. Error analysis + * shows that the values given below are the most effective. + */ + +#if BITS_IN_JSAMPLE == 8 +#define CONST_BITS 13 +#define PASS1_BITS 2 +#else +#define CONST_BITS 13 +#define PASS1_BITS 1 /* lose a little precision to avoid overflow */ +#endif + +/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus + * causing a lot of useless floating-point operations at run time. + * To get around this we use the following pre-calculated constants. + * If you change CONST_BITS you may want to add appropriate values. + * (With a reasonable C compiler, you can just rely on the FIX() macro...) + */ + +#if CONST_BITS == 13 +#define FIX_0_298631336 ((INT32) 2446) /* FIX(0.298631336) */ +#define FIX_0_390180644 ((INT32) 3196) /* FIX(0.390180644) */ +#define FIX_0_541196100 ((INT32) 4433) /* FIX(0.541196100) */ +#define FIX_0_765366865 ((INT32) 6270) /* FIX(0.765366865) */ +#define FIX_0_899976223 ((INT32) 7373) /* FIX(0.899976223) */ +#define FIX_1_175875602 ((INT32) 9633) /* FIX(1.175875602) */ +#define FIX_1_501321110 ((INT32) 12299) /* FIX(1.501321110) */ +#define FIX_1_847759065 ((INT32) 15137) /* FIX(1.847759065) */ +#define FIX_1_961570560 ((INT32) 16069) /* FIX(1.961570560) */ +#define FIX_2_053119869 ((INT32) 16819) /* FIX(2.053119869) */ +#define FIX_2_562915447 ((INT32) 20995) /* FIX(2.562915447) */ +#define FIX_3_072711026 ((INT32) 25172) /* FIX(3.072711026) */ +#else +#define FIX_0_298631336 FIX(0.298631336) +#define FIX_0_390180644 FIX(0.390180644) +#define FIX_0_541196100 FIX(0.541196100) +#define FIX_0_765366865 FIX(0.765366865) +#define FIX_0_899976223 FIX(0.899976223) +#define FIX_1_175875602 FIX(1.175875602) +#define FIX_1_501321110 FIX(1.501321110) +#define FIX_1_847759065 FIX(1.847759065) +#define FIX_1_961570560 FIX(1.961570560) +#define FIX_2_053119869 FIX(2.053119869) +#define FIX_2_562915447 FIX(2.562915447) +#define FIX_3_072711026 FIX(3.072711026) +#endif + + +/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result. + * For 8-bit samples with the recommended scaling, all the variable + * and constant values involved are no more than 16 bits wide, so a + * 16x16->32 bit multiply can be used instead of a full 32x32 multiply. + * For 12-bit samples, a full 32-bit multiplication will be needed. + */ + +#if BITS_IN_JSAMPLE == 8 +#define MULTIPLY(var,const) MULTIPLY16C16(var,const) +#else +#define MULTIPLY(var,const) ((var) * (const)) +#endif + + +/* + * Perform the forward DCT on one block of samples. + */ + +GLOBAL(void) +jpeg_fdct_islow (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3; + INT32 tmp10, tmp11, tmp12, tmp13; + INT32 z1; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * cK represents sqrt(2) * cos(K*pi/16). + */ + + dataptr = data; + for (ctr = 0; ctr < DCTSIZE; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part per LL&M figure 1 --- note that published figure is faulty; + * rotator "c1" should be "c6". + */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[7]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[6]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[5]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[4]); + + tmp10 = tmp0 + tmp3; + tmp12 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp13 = tmp1 - tmp2; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[7]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[6]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[5]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[4]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) ((tmp10 + tmp11 - 8 * CENTERJSAMPLE) << PASS1_BITS); + dataptr[4] = (DCTELEM) ((tmp10 - tmp11) << PASS1_BITS); + + z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-1); + + dataptr[2] = (DCTELEM) + RIGHT_SHIFT(z1 + MULTIPLY(tmp12, FIX_0_765366865), /* c2-c6 */ + CONST_BITS-PASS1_BITS); + dataptr[6] = (DCTELEM) + RIGHT_SHIFT(z1 - MULTIPLY(tmp13, FIX_1_847759065), /* c2+c6 */ + CONST_BITS-PASS1_BITS); + + /* Odd part per figure 8 --- note paper omits factor of sqrt(2). + * i0..i3 in the paper are tmp0..tmp3 here. + */ + + tmp12 = tmp0 + tmp2; + tmp13 = tmp1 + tmp3; + + z1 = MULTIPLY(tmp12 + tmp13, FIX_1_175875602); /* c3 */ + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-1); + + tmp12 = MULTIPLY(tmp12, - FIX_0_390180644); /* -c3+c5 */ + tmp13 = MULTIPLY(tmp13, - FIX_1_961570560); /* -c3-c5 */ + tmp12 += z1; + tmp13 += z1; + + z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* -c3+c7 */ + tmp0 = MULTIPLY(tmp0, FIX_1_501321110); /* c1+c3-c5-c7 */ + tmp3 = MULTIPLY(tmp3, FIX_0_298631336); /* -c1+c3+c5-c7 */ + tmp0 += z1 + tmp12; + tmp3 += z1 + tmp13; + + z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* -c1-c3 */ + tmp1 = MULTIPLY(tmp1, FIX_3_072711026); /* c1+c3+c5-c7 */ + tmp2 = MULTIPLY(tmp2, FIX_2_053119869); /* c1+c3-c5+c7 */ + tmp1 += z1 + tmp13; + tmp2 += z1 + tmp12; + + dataptr[1] = (DCTELEM) RIGHT_SHIFT(tmp0, CONST_BITS-PASS1_BITS); + dataptr[3] = (DCTELEM) RIGHT_SHIFT(tmp1, CONST_BITS-PASS1_BITS); + dataptr[5] = (DCTELEM) RIGHT_SHIFT(tmp2, CONST_BITS-PASS1_BITS); + dataptr[7] = (DCTELEM) RIGHT_SHIFT(tmp3, CONST_BITS-PASS1_BITS); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * cK represents sqrt(2) * cos(K*pi/16). + */ + + dataptr = data; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part per LL&M figure 1 --- note that published figure is faulty; + * rotator "c1" should be "c6". + */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; + + /* Add fudge factor here for final descale. */ + tmp10 = tmp0 + tmp3 + (ONE << (PASS1_BITS-1)); + tmp12 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp13 = tmp1 - tmp2; + + tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; + + dataptr[DCTSIZE*0] = (DCTELEM) RIGHT_SHIFT(tmp10 + tmp11, PASS1_BITS); + dataptr[DCTSIZE*4] = (DCTELEM) RIGHT_SHIFT(tmp10 - tmp11, PASS1_BITS); + + z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS+PASS1_BITS-1); + + dataptr[DCTSIZE*2] = (DCTELEM) + RIGHT_SHIFT(z1 + MULTIPLY(tmp12, FIX_0_765366865), /* c2-c6 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*6] = (DCTELEM) + RIGHT_SHIFT(z1 - MULTIPLY(tmp13, FIX_1_847759065), /* c2+c6 */ + CONST_BITS+PASS1_BITS); + + /* Odd part per figure 8 --- note paper omits factor of sqrt(2). + * i0..i3 in the paper are tmp0..tmp3 here. + */ + + tmp12 = tmp0 + tmp2; + tmp13 = tmp1 + tmp3; + + z1 = MULTIPLY(tmp12 + tmp13, FIX_1_175875602); /* c3 */ + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS+PASS1_BITS-1); + + tmp12 = MULTIPLY(tmp12, - FIX_0_390180644); /* -c3+c5 */ + tmp13 = MULTIPLY(tmp13, - FIX_1_961570560); /* -c3-c5 */ + tmp12 += z1; + tmp13 += z1; + + z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* -c3+c7 */ + tmp0 = MULTIPLY(tmp0, FIX_1_501321110); /* c1+c3-c5-c7 */ + tmp3 = MULTIPLY(tmp3, FIX_0_298631336); /* -c1+c3+c5-c7 */ + tmp0 += z1 + tmp12; + tmp3 += z1 + tmp13; + + z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* -c1-c3 */ + tmp1 = MULTIPLY(tmp1, FIX_3_072711026); /* c1+c3+c5-c7 */ + tmp2 = MULTIPLY(tmp2, FIX_2_053119869); /* c1+c3-c5+c7 */ + tmp1 += z1 + tmp13; + tmp2 += z1 + tmp12; + + dataptr[DCTSIZE*1] = (DCTELEM) RIGHT_SHIFT(tmp0, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) RIGHT_SHIFT(tmp1, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*5] = (DCTELEM) RIGHT_SHIFT(tmp2, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*7] = (DCTELEM) RIGHT_SHIFT(tmp3, CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + +#ifdef DCT_SCALING_SUPPORTED + + +/* + * Perform the forward DCT on a 7x7 sample block. + */ + +GLOBAL(void) +jpeg_fdct_7x7 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3; + INT32 tmp10, tmp11, tmp12; + INT32 z1, z2, z3; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * cK represents sqrt(2) * cos(K*pi/14). + */ + + dataptr = data; + for (ctr = 0; ctr < 7; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[6]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[5]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[4]); + tmp3 = GETJSAMPLE(elemptr[3]); + + tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[6]); + tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[5]); + tmp12 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[4]); + + z1 = tmp0 + tmp2; + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((z1 + tmp1 + tmp3 - 7 * CENTERJSAMPLE) << PASS1_BITS); + tmp3 += tmp3; + z1 -= tmp3; + z1 -= tmp3; + z1 = MULTIPLY(z1, FIX(0.353553391)); /* (c2+c6-c4)/2 */ + z2 = MULTIPLY(tmp0 - tmp2, FIX(0.920609002)); /* (c2+c4-c6)/2 */ + z3 = MULTIPLY(tmp1 - tmp2, FIX(0.314692123)); /* c6 */ + dataptr[2] = (DCTELEM) DESCALE(z1 + z2 + z3, CONST_BITS-PASS1_BITS); + z1 -= z2; + z2 = MULTIPLY(tmp0 - tmp1, FIX(0.881747734)); /* c4 */ + dataptr[4] = (DCTELEM) + DESCALE(z2 + z3 - MULTIPLY(tmp1 - tmp3, FIX(0.707106781)), /* c2+c6-c4 */ + CONST_BITS-PASS1_BITS); + dataptr[6] = (DCTELEM) DESCALE(z1 + z2, CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp1 = MULTIPLY(tmp10 + tmp11, FIX(0.935414347)); /* (c3+c1-c5)/2 */ + tmp2 = MULTIPLY(tmp10 - tmp11, FIX(0.170262339)); /* (c3+c5-c1)/2 */ + tmp0 = tmp1 - tmp2; + tmp1 += tmp2; + tmp2 = MULTIPLY(tmp11 + tmp12, - FIX(1.378756276)); /* -c1 */ + tmp1 += tmp2; + tmp3 = MULTIPLY(tmp10 + tmp12, FIX(0.613604268)); /* c5 */ + tmp0 += tmp3; + tmp2 += tmp3 + MULTIPLY(tmp12, FIX(1.870828693)); /* c3+c1-c5 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp0, CONST_BITS-PASS1_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp1, CONST_BITS-PASS1_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp2, CONST_BITS-PASS1_BITS); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/7)**2 = 64/49, which we fold + * into the constant multipliers: + * cK now represents sqrt(2) * cos(K*pi/14) * 64/49. + */ + + dataptr = data; + for (ctr = 0; ctr < 7; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*6]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*5]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*4]; + tmp3 = dataptr[DCTSIZE*3]; + + tmp10 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*6]; + tmp11 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*5]; + tmp12 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*4]; + + z1 = tmp0 + tmp2; + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(z1 + tmp1 + tmp3, FIX(1.306122449)), /* 64/49 */ + CONST_BITS+PASS1_BITS); + tmp3 += tmp3; + z1 -= tmp3; + z1 -= tmp3; + z1 = MULTIPLY(z1, FIX(0.461784020)); /* (c2+c6-c4)/2 */ + z2 = MULTIPLY(tmp0 - tmp2, FIX(1.202428084)); /* (c2+c4-c6)/2 */ + z3 = MULTIPLY(tmp1 - tmp2, FIX(0.411026446)); /* c6 */ + dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(z1 + z2 + z3, CONST_BITS+PASS1_BITS); + z1 -= z2; + z2 = MULTIPLY(tmp0 - tmp1, FIX(1.151670509)); /* c4 */ + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(z2 + z3 - MULTIPLY(tmp1 - tmp3, FIX(0.923568041)), /* c2+c6-c4 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*6] = (DCTELEM) DESCALE(z1 + z2, CONST_BITS+PASS1_BITS); + + /* Odd part */ + + tmp1 = MULTIPLY(tmp10 + tmp11, FIX(1.221765677)); /* (c3+c1-c5)/2 */ + tmp2 = MULTIPLY(tmp10 - tmp11, FIX(0.222383464)); /* (c3+c5-c1)/2 */ + tmp0 = tmp1 - tmp2; + tmp1 += tmp2; + tmp2 = MULTIPLY(tmp11 + tmp12, - FIX(1.800824523)); /* -c1 */ + tmp1 += tmp2; + tmp3 = MULTIPLY(tmp10 + tmp12, FIX(0.801442310)); /* c5 */ + tmp0 += tmp3; + tmp2 += tmp3 + MULTIPLY(tmp12, FIX(2.443531355)); /* c3+c1-c5 */ + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp0, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp1, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp2, CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 6x6 sample block. + */ + +GLOBAL(void) +jpeg_fdct_6x6 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2; + INT32 tmp10, tmp11, tmp12; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * cK represents sqrt(2) * cos(K*pi/12). + */ + + dataptr = data; + for (ctr = 0; ctr < 6; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[5]); + tmp11 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[4]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[3]); + + tmp10 = tmp0 + tmp2; + tmp12 = tmp0 - tmp2; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[5]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[4]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[3]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 - 6 * CENTERJSAMPLE) << PASS1_BITS); + dataptr[2] = (DCTELEM) + DESCALE(MULTIPLY(tmp12, FIX(1.224744871)), /* c2 */ + CONST_BITS-PASS1_BITS); + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp11 - tmp11, FIX(0.707106781)), /* c4 */ + CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp10 = DESCALE(MULTIPLY(tmp0 + tmp2, FIX(0.366025404)), /* c5 */ + CONST_BITS-PASS1_BITS); + + dataptr[1] = (DCTELEM) (tmp10 + ((tmp0 + tmp1) << PASS1_BITS)); + dataptr[3] = (DCTELEM) ((tmp0 - tmp1 - tmp2) << PASS1_BITS); + dataptr[5] = (DCTELEM) (tmp10 + ((tmp2 - tmp1) << PASS1_BITS)); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/6)**2 = 16/9, which we fold + * into the constant multipliers: + * cK now represents sqrt(2) * cos(K*pi/12) * 16/9. + */ + + dataptr = data; + for (ctr = 0; ctr < 6; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*5]; + tmp11 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*3]; + + tmp10 = tmp0 + tmp2; + tmp12 = tmp0 - tmp2; + + tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*5]; + tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*3]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp11, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(MULTIPLY(tmp12, FIX(2.177324216)), /* c2 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp11 - tmp11, FIX(1.257078722)), /* c4 */ + CONST_BITS+PASS1_BITS); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp0 + tmp2, FIX(0.650711829)); /* c5 */ + + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp0 + tmp1, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 - tmp1 - tmp2, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*5] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp2 - tmp1, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 5x5 sample block. + */ + +GLOBAL(void) +jpeg_fdct_5x5 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2; + INT32 tmp10, tmp11; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * We scale the results further by 2 as part of output adaption + * scaling for different DCT size. + * cK represents sqrt(2) * cos(K*pi/10). + */ + + dataptr = data; + for (ctr = 0; ctr < 5; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[4]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[3]); + tmp2 = GETJSAMPLE(elemptr[2]); + + tmp10 = tmp0 + tmp1; + tmp11 = tmp0 - tmp1; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[4]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[3]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp2 - 5 * CENTERJSAMPLE) << (PASS1_BITS+1)); + tmp11 = MULTIPLY(tmp11, FIX(0.790569415)); /* (c2+c4)/2 */ + tmp10 -= tmp2 << 2; + tmp10 = MULTIPLY(tmp10, FIX(0.353553391)); /* (c2-c4)/2 */ + dataptr[2] = (DCTELEM) DESCALE(tmp11 + tmp10, CONST_BITS-PASS1_BITS-1); + dataptr[4] = (DCTELEM) DESCALE(tmp11 - tmp10, CONST_BITS-PASS1_BITS-1); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp0 + tmp1, FIX(0.831253876)); /* c3 */ + + dataptr[1] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp0, FIX(0.513743148)), /* c1-c3 */ + CONST_BITS-PASS1_BITS-1); + dataptr[3] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp1, FIX(2.176250899)), /* c1+c3 */ + CONST_BITS-PASS1_BITS-1); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/5)**2 = 64/25, which we partially + * fold into the constant multipliers (other part was done in pass 1): + * cK now represents sqrt(2) * cos(K*pi/10) * 32/25. + */ + + dataptr = data; + for (ctr = 0; ctr < 5; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*4]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*3]; + tmp2 = dataptr[DCTSIZE*2]; + + tmp10 = tmp0 + tmp1; + tmp11 = tmp0 - tmp1; + + tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*4]; + tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*3]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp2, FIX(1.28)), /* 32/25 */ + CONST_BITS+PASS1_BITS); + tmp11 = MULTIPLY(tmp11, FIX(1.011928851)); /* (c2+c4)/2 */ + tmp10 -= tmp2 << 2; + tmp10 = MULTIPLY(tmp10, FIX(0.452548340)); /* (c2-c4)/2 */ + dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(tmp11 + tmp10, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(tmp11 - tmp10, CONST_BITS+PASS1_BITS); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp0 + tmp1, FIX(1.064004961)); /* c3 */ + + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp0, FIX(0.657591230)), /* c1-c3 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp1, FIX(2.785601151)), /* c1+c3 */ + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 4x4 sample block. + */ + +GLOBAL(void) +jpeg_fdct_4x4 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1; + INT32 tmp10, tmp11; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * We must also scale the output by (8/4)**2 = 2**2, which we add here. + * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point FDCT]. + */ + + dataptr = data; + for (ctr = 0; ctr < 4; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[3]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[2]); + + tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[3]); + tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[2]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((tmp0 + tmp1 - 4 * CENTERJSAMPLE) << (PASS1_BITS+2)); + dataptr[2] = (DCTELEM) ((tmp0 - tmp1) << (PASS1_BITS+2)); + + /* Odd part */ + + tmp0 = MULTIPLY(tmp10 + tmp11, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-PASS1_BITS-3); + + dataptr[1] = (DCTELEM) + RIGHT_SHIFT(tmp0 + MULTIPLY(tmp10, FIX_0_765366865), /* c2-c6 */ + CONST_BITS-PASS1_BITS-2); + dataptr[3] = (DCTELEM) + RIGHT_SHIFT(tmp0 - MULTIPLY(tmp11, FIX_1_847759065), /* c2+c6 */ + CONST_BITS-PASS1_BITS-2); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point FDCT]. + */ + + dataptr = data; + for (ctr = 0; ctr < 4; ctr++) { + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*3] + (ONE << (PASS1_BITS-1)); + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*2]; + + tmp10 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*3]; + tmp11 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*2]; + + dataptr[DCTSIZE*0] = (DCTELEM) RIGHT_SHIFT(tmp0 + tmp1, PASS1_BITS); + dataptr[DCTSIZE*2] = (DCTELEM) RIGHT_SHIFT(tmp0 - tmp1, PASS1_BITS); + + /* Odd part */ + + tmp0 = MULTIPLY(tmp10 + tmp11, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS+PASS1_BITS-1); + + dataptr[DCTSIZE*1] = (DCTELEM) + RIGHT_SHIFT(tmp0 + MULTIPLY(tmp10, FIX_0_765366865), /* c2-c6 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) + RIGHT_SHIFT(tmp0 - MULTIPLY(tmp11, FIX_1_847759065), /* c2+c6 */ + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 3x3 sample block. + */ + +GLOBAL(void) +jpeg_fdct_3x3 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * We scale the results further by 2**2 as part of output adaption + * scaling for different DCT size. + * cK represents sqrt(2) * cos(K*pi/6). + */ + + dataptr = data; + for (ctr = 0; ctr < 3; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[2]); + tmp1 = GETJSAMPLE(elemptr[1]); + + tmp2 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[2]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((tmp0 + tmp1 - 3 * CENTERJSAMPLE) << (PASS1_BITS+2)); + dataptr[2] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 - tmp1 - tmp1, FIX(0.707106781)), /* c2 */ + CONST_BITS-PASS1_BITS-2); + + /* Odd part */ + + dataptr[1] = (DCTELEM) + DESCALE(MULTIPLY(tmp2, FIX(1.224744871)), /* c1 */ + CONST_BITS-PASS1_BITS-2); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/3)**2 = 64/9, which we partially + * fold into the constant multipliers (other part was done in pass 1): + * cK now represents sqrt(2) * cos(K*pi/6) * 16/9. + */ + + dataptr = data; + for (ctr = 0; ctr < 3; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*2]; + tmp1 = dataptr[DCTSIZE*1]; + + tmp2 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*2]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 + tmp1, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 - tmp1 - tmp1, FIX(1.257078722)), /* c2 */ + CONST_BITS+PASS1_BITS); + + /* Odd part */ + + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(MULTIPLY(tmp2, FIX(2.177324216)), /* c1 */ + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 2x2 sample block. + */ + +GLOBAL(void) +jpeg_fdct_2x2 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + DCTELEM tmp0, tmp1, tmp2, tmp3; + JSAMPROW elemptr; + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT. + */ + + /* Row 0 */ + elemptr = sample_data[0] + start_col; + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[1]); + tmp1 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[1]); + + /* Row 1 */ + elemptr = sample_data[1] + start_col; + + tmp2 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[1]); + tmp3 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[1]); + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/2)**2 = 2**4. + */ + + /* Column 0 */ + /* Apply unsigned->signed conversion. */ + data[DCTSIZE*0] = (tmp0 + tmp2 - 4 * CENTERJSAMPLE) << 4; + data[DCTSIZE*1] = (tmp0 - tmp2) << 4; + + /* Column 1 */ + data[DCTSIZE*0+1] = (tmp1 + tmp3) << 4; + data[DCTSIZE*1+1] = (tmp1 - tmp3) << 4; +} + + +/* + * Perform the forward DCT on a 1x1 sample block. + */ + +GLOBAL(void) +jpeg_fdct_1x1 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + DCTELEM dcval; + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + dcval = GETJSAMPLE(sample_data[0][start_col]); + + /* We leave the result scaled up by an overall factor of 8. */ + /* We must also scale the output by (8/1)**2 = 2**6. */ + /* Apply unsigned->signed conversion. */ + data[0] = (dcval - CENTERJSAMPLE) << 6; +} + + +/* + * Perform the forward DCT on a 9x9 sample block. + */ + +GLOBAL(void) +jpeg_fdct_9x9 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4; + INT32 tmp10, tmp11, tmp12, tmp13; + INT32 z1, z2; + DCTELEM workspace[8]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * we scale the results further by 2 as part of output adaption + * scaling for different DCT size. + * cK represents sqrt(2) * cos(K*pi/18). + */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[8]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[7]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[6]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[5]); + tmp4 = GETJSAMPLE(elemptr[4]); + + tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[8]); + tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[7]); + tmp12 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[6]); + tmp13 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[5]); + + z1 = tmp0 + tmp2 + tmp3; + z2 = tmp1 + tmp4; + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) ((z1 + z2 - 9 * CENTERJSAMPLE) << 1); + dataptr[6] = (DCTELEM) + DESCALE(MULTIPLY(z1 - z2 - z2, FIX(0.707106781)), /* c6 */ + CONST_BITS-1); + z1 = MULTIPLY(tmp0 - tmp2, FIX(1.328926049)); /* c2 */ + z2 = MULTIPLY(tmp1 - tmp4 - tmp4, FIX(0.707106781)); /* c6 */ + dataptr[2] = (DCTELEM) + DESCALE(MULTIPLY(tmp2 - tmp3, FIX(1.083350441)) /* c4 */ + + z1 + z2, CONST_BITS-1); + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp3 - tmp0, FIX(0.245575608)) /* c8 */ + + z1 - z2, CONST_BITS-1); + + /* Odd part */ + + dataptr[3] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12 - tmp13, FIX(1.224744871)), /* c3 */ + CONST_BITS-1); + + tmp11 = MULTIPLY(tmp11, FIX(1.224744871)); /* c3 */ + tmp0 = MULTIPLY(tmp10 + tmp12, FIX(0.909038955)); /* c5 */ + tmp1 = MULTIPLY(tmp10 + tmp13, FIX(0.483689525)); /* c7 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp11 + tmp0 + tmp1, CONST_BITS-1); + + tmp2 = MULTIPLY(tmp12 - tmp13, FIX(1.392728481)); /* c1 */ + + dataptr[5] = (DCTELEM) DESCALE(tmp0 - tmp11 - tmp2, CONST_BITS-1); + dataptr[7] = (DCTELEM) DESCALE(tmp1 - tmp11 + tmp2, CONST_BITS-1); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 9) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/9)**2 = 64/81, which we partially + * fold into the constant multipliers and final/initial shifting: + * cK now represents sqrt(2) * cos(K*pi/18) * 128/81. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*0]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*7]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*6]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*5]; + tmp4 = dataptr[DCTSIZE*4]; + + tmp10 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*0]; + tmp11 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*7]; + tmp12 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*6]; + tmp13 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*5]; + + z1 = tmp0 + tmp2 + tmp3; + z2 = tmp1 + tmp4; + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(z1 + z2, FIX(1.580246914)), /* 128/81 */ + CONST_BITS+2); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(MULTIPLY(z1 - z2 - z2, FIX(1.117403309)), /* c6 */ + CONST_BITS+2); + z1 = MULTIPLY(tmp0 - tmp2, FIX(2.100031287)); /* c2 */ + z2 = MULTIPLY(tmp1 - tmp4 - tmp4, FIX(1.117403309)); /* c6 */ + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(MULTIPLY(tmp2 - tmp3, FIX(1.711961190)) /* c4 */ + + z1 + z2, CONST_BITS+2); + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp3 - tmp0, FIX(0.388070096)) /* c8 */ + + z1 - z2, CONST_BITS+2); + + /* Odd part */ + + dataptr[DCTSIZE*3] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12 - tmp13, FIX(1.935399303)), /* c3 */ + CONST_BITS+2); + + tmp11 = MULTIPLY(tmp11, FIX(1.935399303)); /* c3 */ + tmp0 = MULTIPLY(tmp10 + tmp12, FIX(1.436506004)); /* c5 */ + tmp1 = MULTIPLY(tmp10 + tmp13, FIX(0.764348879)); /* c7 */ + + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(tmp11 + tmp0 + tmp1, CONST_BITS+2); + + tmp2 = MULTIPLY(tmp12 - tmp13, FIX(2.200854883)); /* c1 */ + + dataptr[DCTSIZE*5] = (DCTELEM) + DESCALE(tmp0 - tmp11 - tmp2, CONST_BITS+2); + dataptr[DCTSIZE*7] = (DCTELEM) + DESCALE(tmp1 - tmp11 + tmp2, CONST_BITS+2); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 10x10 sample block. + */ + +GLOBAL(void) +jpeg_fdct_10x10 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14; + DCTELEM workspace[8*2]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * we scale the results further by 2 as part of output adaption + * scaling for different DCT size. + * cK represents sqrt(2) * cos(K*pi/20). + */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[9]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[8]); + tmp12 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[7]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[6]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[5]); + + tmp10 = tmp0 + tmp4; + tmp13 = tmp0 - tmp4; + tmp11 = tmp1 + tmp3; + tmp14 = tmp1 - tmp3; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[9]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[8]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[7]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[6]); + tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[5]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 + tmp12 - 10 * CENTERJSAMPLE) << 1); + tmp12 += tmp12; + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.144122806)) - /* c4 */ + MULTIPLY(tmp11 - tmp12, FIX(0.437016024)), /* c8 */ + CONST_BITS-1); + tmp10 = MULTIPLY(tmp13 + tmp14, FIX(0.831253876)); /* c6 */ + dataptr[2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp13, FIX(0.513743148)), /* c2-c6 */ + CONST_BITS-1); + dataptr[6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp14, FIX(2.176250899)), /* c2+c6 */ + CONST_BITS-1); + + /* Odd part */ + + tmp10 = tmp0 + tmp4; + tmp11 = tmp1 - tmp3; + dataptr[5] = (DCTELEM) ((tmp10 - tmp11 - tmp2) << 1); + tmp2 <<= CONST_BITS; + dataptr[1] = (DCTELEM) + DESCALE(MULTIPLY(tmp0, FIX(1.396802247)) + /* c1 */ + MULTIPLY(tmp1, FIX(1.260073511)) + tmp2 + /* c3 */ + MULTIPLY(tmp3, FIX(0.642039522)) + /* c7 */ + MULTIPLY(tmp4, FIX(0.221231742)), /* c9 */ + CONST_BITS-1); + tmp12 = MULTIPLY(tmp0 - tmp4, FIX(0.951056516)) - /* (c3+c7)/2 */ + MULTIPLY(tmp1 + tmp3, FIX(0.587785252)); /* (c1-c9)/2 */ + tmp13 = MULTIPLY(tmp10 + tmp11, FIX(0.309016994)) + /* (c3-c7)/2 */ + (tmp11 << (CONST_BITS - 1)) - tmp2; + dataptr[3] = (DCTELEM) DESCALE(tmp12 + tmp13, CONST_BITS-1); + dataptr[7] = (DCTELEM) DESCALE(tmp12 - tmp13, CONST_BITS-1); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 10) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/10)**2 = 16/25, which we partially + * fold into the constant multipliers and final/initial shifting: + * cK now represents sqrt(2) * cos(K*pi/20) * 32/25. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*1]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*0]; + tmp12 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*7]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*6]; + tmp4 = dataptr[DCTSIZE*4] + dataptr[DCTSIZE*5]; + + tmp10 = tmp0 + tmp4; + tmp13 = tmp0 - tmp4; + tmp11 = tmp1 + tmp3; + tmp14 = tmp1 - tmp3; + + tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*1]; + tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*0]; + tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*7]; + tmp3 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*6]; + tmp4 = dataptr[DCTSIZE*4] - dataptr[DCTSIZE*5]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp11 + tmp12, FIX(1.28)), /* 32/25 */ + CONST_BITS+2); + tmp12 += tmp12; + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.464477191)) - /* c4 */ + MULTIPLY(tmp11 - tmp12, FIX(0.559380511)), /* c8 */ + CONST_BITS+2); + tmp10 = MULTIPLY(tmp13 + tmp14, FIX(1.064004961)); /* c6 */ + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp13, FIX(0.657591230)), /* c2-c6 */ + CONST_BITS+2); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp14, FIX(2.785601151)), /* c2+c6 */ + CONST_BITS+2); + + /* Odd part */ + + tmp10 = tmp0 + tmp4; + tmp11 = tmp1 - tmp3; + dataptr[DCTSIZE*5] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp11 - tmp2, FIX(1.28)), /* 32/25 */ + CONST_BITS+2); + tmp2 = MULTIPLY(tmp2, FIX(1.28)); /* 32/25 */ + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(MULTIPLY(tmp0, FIX(1.787906876)) + /* c1 */ + MULTIPLY(tmp1, FIX(1.612894094)) + tmp2 + /* c3 */ + MULTIPLY(tmp3, FIX(0.821810588)) + /* c7 */ + MULTIPLY(tmp4, FIX(0.283176630)), /* c9 */ + CONST_BITS+2); + tmp12 = MULTIPLY(tmp0 - tmp4, FIX(1.217352341)) - /* (c3+c7)/2 */ + MULTIPLY(tmp1 + tmp3, FIX(0.752365123)); /* (c1-c9)/2 */ + tmp13 = MULTIPLY(tmp10 + tmp11, FIX(0.395541753)) + /* (c3-c7)/2 */ + MULTIPLY(tmp11, FIX(0.64)) - tmp2; /* 16/25 */ + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp12 + tmp13, CONST_BITS+2); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp12 - tmp13, CONST_BITS+2); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on an 11x11 sample block. + */ + +GLOBAL(void) +jpeg_fdct_11x11 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14; + INT32 z1, z2, z3; + DCTELEM workspace[8*3]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * we scale the results further by 2 as part of output adaption + * scaling for different DCT size. + * cK represents sqrt(2) * cos(K*pi/22). + */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[10]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[9]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[8]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[7]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[6]); + tmp5 = GETJSAMPLE(elemptr[5]); + + tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[10]); + tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[9]); + tmp12 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[8]); + tmp13 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[7]); + tmp14 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[6]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((tmp0 + tmp1 + tmp2 + tmp3 + tmp4 + tmp5 - 11 * CENTERJSAMPLE) << 1); + tmp5 += tmp5; + tmp0 -= tmp5; + tmp1 -= tmp5; + tmp2 -= tmp5; + tmp3 -= tmp5; + tmp4 -= tmp5; + z1 = MULTIPLY(tmp0 + tmp3, FIX(1.356927976)) + /* c2 */ + MULTIPLY(tmp2 + tmp4, FIX(0.201263574)); /* c10 */ + z2 = MULTIPLY(tmp1 - tmp3, FIX(0.926112931)); /* c6 */ + z3 = MULTIPLY(tmp0 - tmp1, FIX(1.189712156)); /* c4 */ + dataptr[2] = (DCTELEM) + DESCALE(z1 + z2 - MULTIPLY(tmp3, FIX(1.018300590)) /* c2+c8-c6 */ + - MULTIPLY(tmp4, FIX(1.390975730)), /* c4+c10 */ + CONST_BITS-1); + dataptr[4] = (DCTELEM) + DESCALE(z2 + z3 + MULTIPLY(tmp1, FIX(0.062335650)) /* c4-c6-c10 */ + - MULTIPLY(tmp2, FIX(1.356927976)) /* c2 */ + + MULTIPLY(tmp4, FIX(0.587485545)), /* c8 */ + CONST_BITS-1); + dataptr[6] = (DCTELEM) + DESCALE(z1 + z3 - MULTIPLY(tmp0, FIX(1.620527200)) /* c2+c4-c6 */ + - MULTIPLY(tmp2, FIX(0.788749120)), /* c8+c10 */ + CONST_BITS-1); + + /* Odd part */ + + tmp1 = MULTIPLY(tmp10 + tmp11, FIX(1.286413905)); /* c3 */ + tmp2 = MULTIPLY(tmp10 + tmp12, FIX(1.068791298)); /* c5 */ + tmp3 = MULTIPLY(tmp10 + tmp13, FIX(0.764581576)); /* c7 */ + tmp0 = tmp1 + tmp2 + tmp3 - MULTIPLY(tmp10, FIX(1.719967871)) /* c7+c5+c3-c1 */ + + MULTIPLY(tmp14, FIX(0.398430003)); /* c9 */ + tmp4 = MULTIPLY(tmp11 + tmp12, - FIX(0.764581576)); /* -c7 */ + tmp5 = MULTIPLY(tmp11 + tmp13, - FIX(1.399818907)); /* -c1 */ + tmp1 += tmp4 + tmp5 + MULTIPLY(tmp11, FIX(1.276416582)) /* c9+c7+c1-c3 */ + - MULTIPLY(tmp14, FIX(1.068791298)); /* c5 */ + tmp10 = MULTIPLY(tmp12 + tmp13, FIX(0.398430003)); /* c9 */ + tmp2 += tmp4 + tmp10 - MULTIPLY(tmp12, FIX(1.989053629)) /* c9+c5+c3-c7 */ + + MULTIPLY(tmp14, FIX(1.399818907)); /* c1 */ + tmp3 += tmp5 + tmp10 + MULTIPLY(tmp13, FIX(1.305598626)) /* c1+c5-c9-c7 */ + - MULTIPLY(tmp14, FIX(1.286413905)); /* c3 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp0, CONST_BITS-1); + dataptr[3] = (DCTELEM) DESCALE(tmp1, CONST_BITS-1); + dataptr[5] = (DCTELEM) DESCALE(tmp2, CONST_BITS-1); + dataptr[7] = (DCTELEM) DESCALE(tmp3, CONST_BITS-1); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 11) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/11)**2 = 64/121, which we partially + * fold into the constant multipliers and final/initial shifting: + * cK now represents sqrt(2) * cos(K*pi/22) * 128/121. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*2]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*1]; + tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*0]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*7]; + tmp4 = dataptr[DCTSIZE*4] + dataptr[DCTSIZE*6]; + tmp5 = dataptr[DCTSIZE*5]; + + tmp10 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*2]; + tmp11 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*1]; + tmp12 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*0]; + tmp13 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*7]; + tmp14 = dataptr[DCTSIZE*4] - dataptr[DCTSIZE*6]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 + tmp1 + tmp2 + tmp3 + tmp4 + tmp5, + FIX(1.057851240)), /* 128/121 */ + CONST_BITS+2); + tmp5 += tmp5; + tmp0 -= tmp5; + tmp1 -= tmp5; + tmp2 -= tmp5; + tmp3 -= tmp5; + tmp4 -= tmp5; + z1 = MULTIPLY(tmp0 + tmp3, FIX(1.435427942)) + /* c2 */ + MULTIPLY(tmp2 + tmp4, FIX(0.212906922)); /* c10 */ + z2 = MULTIPLY(tmp1 - tmp3, FIX(0.979689713)); /* c6 */ + z3 = MULTIPLY(tmp0 - tmp1, FIX(1.258538479)); /* c4 */ + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(z1 + z2 - MULTIPLY(tmp3, FIX(1.077210542)) /* c2+c8-c6 */ + - MULTIPLY(tmp4, FIX(1.471445400)), /* c4+c10 */ + CONST_BITS+2); + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(z2 + z3 + MULTIPLY(tmp1, FIX(0.065941844)) /* c4-c6-c10 */ + - MULTIPLY(tmp2, FIX(1.435427942)) /* c2 */ + + MULTIPLY(tmp4, FIX(0.621472312)), /* c8 */ + CONST_BITS+2); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(z1 + z3 - MULTIPLY(tmp0, FIX(1.714276708)) /* c2+c4-c6 */ + - MULTIPLY(tmp2, FIX(0.834379234)), /* c8+c10 */ + CONST_BITS+2); + + /* Odd part */ + + tmp1 = MULTIPLY(tmp10 + tmp11, FIX(1.360834544)); /* c3 */ + tmp2 = MULTIPLY(tmp10 + tmp12, FIX(1.130622199)); /* c5 */ + tmp3 = MULTIPLY(tmp10 + tmp13, FIX(0.808813568)); /* c7 */ + tmp0 = tmp1 + tmp2 + tmp3 - MULTIPLY(tmp10, FIX(1.819470145)) /* c7+c5+c3-c1 */ + + MULTIPLY(tmp14, FIX(0.421479672)); /* c9 */ + tmp4 = MULTIPLY(tmp11 + tmp12, - FIX(0.808813568)); /* -c7 */ + tmp5 = MULTIPLY(tmp11 + tmp13, - FIX(1.480800167)); /* -c1 */ + tmp1 += tmp4 + tmp5 + MULTIPLY(tmp11, FIX(1.350258864)) /* c9+c7+c1-c3 */ + - MULTIPLY(tmp14, FIX(1.130622199)); /* c5 */ + tmp10 = MULTIPLY(tmp12 + tmp13, FIX(0.421479672)); /* c9 */ + tmp2 += tmp4 + tmp10 - MULTIPLY(tmp12, FIX(2.104122847)) /* c9+c5+c3-c7 */ + + MULTIPLY(tmp14, FIX(1.480800167)); /* c1 */ + tmp3 += tmp5 + tmp10 + MULTIPLY(tmp13, FIX(1.381129125)) /* c1+c5-c9-c7 */ + - MULTIPLY(tmp14, FIX(1.360834544)); /* c3 */ + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp0, CONST_BITS+2); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp1, CONST_BITS+2); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp2, CONST_BITS+2); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp3, CONST_BITS+2); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 12x12 sample block. + */ + +GLOBAL(void) +jpeg_fdct_12x12 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; + DCTELEM workspace[8*4]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT. + * cK represents sqrt(2) * cos(K*pi/24). + */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[11]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[10]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[9]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[8]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[7]); + tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[6]); + + tmp10 = tmp0 + tmp5; + tmp13 = tmp0 - tmp5; + tmp11 = tmp1 + tmp4; + tmp14 = tmp1 - tmp4; + tmp12 = tmp2 + tmp3; + tmp15 = tmp2 - tmp3; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[11]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[10]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[9]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[8]); + tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[7]); + tmp5 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[6]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) (tmp10 + tmp11 + tmp12 - 12 * CENTERJSAMPLE); + dataptr[6] = (DCTELEM) (tmp13 - tmp14 - tmp15); + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.224744871)), /* c4 */ + CONST_BITS); + dataptr[2] = (DCTELEM) + DESCALE(tmp14 - tmp15 + MULTIPLY(tmp13 + tmp15, FIX(1.366025404)), /* c2 */ + CONST_BITS); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp1 + tmp4, FIX_0_541196100); /* c9 */ + tmp14 = tmp10 + MULTIPLY(tmp1, FIX_0_765366865); /* c3-c9 */ + tmp15 = tmp10 - MULTIPLY(tmp4, FIX_1_847759065); /* c3+c9 */ + tmp12 = MULTIPLY(tmp0 + tmp2, FIX(1.121971054)); /* c5 */ + tmp13 = MULTIPLY(tmp0 + tmp3, FIX(0.860918669)); /* c7 */ + tmp10 = tmp12 + tmp13 + tmp14 - MULTIPLY(tmp0, FIX(0.580774953)) /* c5+c7-c1 */ + + MULTIPLY(tmp5, FIX(0.184591911)); /* c11 */ + tmp11 = MULTIPLY(tmp2 + tmp3, - FIX(0.184591911)); /* -c11 */ + tmp12 += tmp11 - tmp15 - MULTIPLY(tmp2, FIX(2.339493912)) /* c1+c5-c11 */ + + MULTIPLY(tmp5, FIX(0.860918669)); /* c7 */ + tmp13 += tmp11 - tmp14 + MULTIPLY(tmp3, FIX(0.725788011)) /* c1+c11-c7 */ + - MULTIPLY(tmp5, FIX(1.121971054)); /* c5 */ + tmp11 = tmp15 + MULTIPLY(tmp0 - tmp3, FIX(1.306562965)) /* c3 */ + - MULTIPLY(tmp2 + tmp5, FIX_0_541196100); /* c9 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp10, CONST_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp11, CONST_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp12, CONST_BITS); + dataptr[7] = (DCTELEM) DESCALE(tmp13, CONST_BITS); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 12) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/12)**2 = 4/9, which we partially + * fold into the constant multipliers and final shifting: + * cK now represents sqrt(2) * cos(K*pi/24) * 8/9. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*3]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*2]; + tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*1]; + tmp3 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*0]; + tmp4 = dataptr[DCTSIZE*4] + dataptr[DCTSIZE*7]; + tmp5 = dataptr[DCTSIZE*5] + dataptr[DCTSIZE*6]; + + tmp10 = tmp0 + tmp5; + tmp13 = tmp0 - tmp5; + tmp11 = tmp1 + tmp4; + tmp14 = tmp1 - tmp4; + tmp12 = tmp2 + tmp3; + tmp15 = tmp2 - tmp3; + + tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*3]; + tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*2]; + tmp2 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*1]; + tmp3 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*0]; + tmp4 = dataptr[DCTSIZE*4] - dataptr[DCTSIZE*7]; + tmp5 = dataptr[DCTSIZE*5] - dataptr[DCTSIZE*6]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp11 + tmp12, FIX(0.888888889)), /* 8/9 */ + CONST_BITS+1); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(MULTIPLY(tmp13 - tmp14 - tmp15, FIX(0.888888889)), /* 8/9 */ + CONST_BITS+1); + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.088662108)), /* c4 */ + CONST_BITS+1); + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(MULTIPLY(tmp14 - tmp15, FIX(0.888888889)) + /* 8/9 */ + MULTIPLY(tmp13 + tmp15, FIX(1.214244803)), /* c2 */ + CONST_BITS+1); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp1 + tmp4, FIX(0.481063200)); /* c9 */ + tmp14 = tmp10 + MULTIPLY(tmp1, FIX(0.680326102)); /* c3-c9 */ + tmp15 = tmp10 - MULTIPLY(tmp4, FIX(1.642452502)); /* c3+c9 */ + tmp12 = MULTIPLY(tmp0 + tmp2, FIX(0.997307603)); /* c5 */ + tmp13 = MULTIPLY(tmp0 + tmp3, FIX(0.765261039)); /* c7 */ + tmp10 = tmp12 + tmp13 + tmp14 - MULTIPLY(tmp0, FIX(0.516244403)) /* c5+c7-c1 */ + + MULTIPLY(tmp5, FIX(0.164081699)); /* c11 */ + tmp11 = MULTIPLY(tmp2 + tmp3, - FIX(0.164081699)); /* -c11 */ + tmp12 += tmp11 - tmp15 - MULTIPLY(tmp2, FIX(2.079550144)) /* c1+c5-c11 */ + + MULTIPLY(tmp5, FIX(0.765261039)); /* c7 */ + tmp13 += tmp11 - tmp14 + MULTIPLY(tmp3, FIX(0.645144899)) /* c1+c11-c7 */ + - MULTIPLY(tmp5, FIX(0.997307603)); /* c5 */ + tmp11 = tmp15 + MULTIPLY(tmp0 - tmp3, FIX(1.161389302)) /* c3 */ + - MULTIPLY(tmp2 + tmp5, FIX(0.481063200)); /* c9 */ + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp10, CONST_BITS+1); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp11, CONST_BITS+1); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp12, CONST_BITS+1); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp13, CONST_BITS+1); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 13x13 sample block. + */ + +GLOBAL(void) +jpeg_fdct_13x13 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; + INT32 z1, z2; + DCTELEM workspace[8*5]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT. + * cK represents sqrt(2) * cos(K*pi/26). + */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[12]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[11]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[10]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[9]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[8]); + tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[7]); + tmp6 = GETJSAMPLE(elemptr[6]); + + tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[12]); + tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[11]); + tmp12 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[10]); + tmp13 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[9]); + tmp14 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[8]); + tmp15 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[7]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + (tmp0 + tmp1 + tmp2 + tmp3 + tmp4 + tmp5 + tmp6 - 13 * CENTERJSAMPLE); + tmp6 += tmp6; + tmp0 -= tmp6; + tmp1 -= tmp6; + tmp2 -= tmp6; + tmp3 -= tmp6; + tmp4 -= tmp6; + tmp5 -= tmp6; + dataptr[2] = (DCTELEM) + DESCALE(MULTIPLY(tmp0, FIX(1.373119086)) + /* c2 */ + MULTIPLY(tmp1, FIX(1.058554052)) + /* c6 */ + MULTIPLY(tmp2, FIX(0.501487041)) - /* c10 */ + MULTIPLY(tmp3, FIX(0.170464608)) - /* c12 */ + MULTIPLY(tmp4, FIX(0.803364869)) - /* c8 */ + MULTIPLY(tmp5, FIX(1.252223920)), /* c4 */ + CONST_BITS); + z1 = MULTIPLY(tmp0 - tmp2, FIX(1.155388986)) - /* (c4+c6)/2 */ + MULTIPLY(tmp3 - tmp4, FIX(0.435816023)) - /* (c2-c10)/2 */ + MULTIPLY(tmp1 - tmp5, FIX(0.316450131)); /* (c8-c12)/2 */ + z2 = MULTIPLY(tmp0 + tmp2, FIX(0.096834934)) - /* (c4-c6)/2 */ + MULTIPLY(tmp3 + tmp4, FIX(0.937303064)) + /* (c2+c10)/2 */ + MULTIPLY(tmp1 + tmp5, FIX(0.486914739)); /* (c8+c12)/2 */ + + dataptr[4] = (DCTELEM) DESCALE(z1 + z2, CONST_BITS); + dataptr[6] = (DCTELEM) DESCALE(z1 - z2, CONST_BITS); + + /* Odd part */ + + tmp1 = MULTIPLY(tmp10 + tmp11, FIX(1.322312651)); /* c3 */ + tmp2 = MULTIPLY(tmp10 + tmp12, FIX(1.163874945)); /* c5 */ + tmp3 = MULTIPLY(tmp10 + tmp13, FIX(0.937797057)) + /* c7 */ + MULTIPLY(tmp14 + tmp15, FIX(0.338443458)); /* c11 */ + tmp0 = tmp1 + tmp2 + tmp3 - + MULTIPLY(tmp10, FIX(2.020082300)) + /* c3+c5+c7-c1 */ + MULTIPLY(tmp14, FIX(0.318774355)); /* c9-c11 */ + tmp4 = MULTIPLY(tmp14 - tmp15, FIX(0.937797057)) - /* c7 */ + MULTIPLY(tmp11 + tmp12, FIX(0.338443458)); /* c11 */ + tmp5 = MULTIPLY(tmp11 + tmp13, - FIX(1.163874945)); /* -c5 */ + tmp1 += tmp4 + tmp5 + + MULTIPLY(tmp11, FIX(0.837223564)) - /* c5+c9+c11-c3 */ + MULTIPLY(tmp14, FIX(2.341699410)); /* c1+c7 */ + tmp6 = MULTIPLY(tmp12 + tmp13, - FIX(0.657217813)); /* -c9 */ + tmp2 += tmp4 + tmp6 - + MULTIPLY(tmp12, FIX(1.572116027)) + /* c1+c5-c9-c11 */ + MULTIPLY(tmp15, FIX(2.260109708)); /* c3+c7 */ + tmp3 += tmp5 + tmp6 + + MULTIPLY(tmp13, FIX(2.205608352)) - /* c3+c5+c9-c7 */ + MULTIPLY(tmp15, FIX(1.742345811)); /* c1+c11 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp0, CONST_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp1, CONST_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp2, CONST_BITS); + dataptr[7] = (DCTELEM) DESCALE(tmp3, CONST_BITS); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 13) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/13)**2 = 64/169, which we partially + * fold into the constant multipliers and final shifting: + * cK now represents sqrt(2) * cos(K*pi/26) * 128/169. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*4]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*3]; + tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*2]; + tmp3 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*1]; + tmp4 = dataptr[DCTSIZE*4] + wsptr[DCTSIZE*0]; + tmp5 = dataptr[DCTSIZE*5] + dataptr[DCTSIZE*7]; + tmp6 = dataptr[DCTSIZE*6]; + + tmp10 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*4]; + tmp11 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*3]; + tmp12 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*2]; + tmp13 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*1]; + tmp14 = dataptr[DCTSIZE*4] - wsptr[DCTSIZE*0]; + tmp15 = dataptr[DCTSIZE*5] - dataptr[DCTSIZE*7]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 + tmp1 + tmp2 + tmp3 + tmp4 + tmp5 + tmp6, + FIX(0.757396450)), /* 128/169 */ + CONST_BITS+1); + tmp6 += tmp6; + tmp0 -= tmp6; + tmp1 -= tmp6; + tmp2 -= tmp6; + tmp3 -= tmp6; + tmp4 -= tmp6; + tmp5 -= tmp6; + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(MULTIPLY(tmp0, FIX(1.039995521)) + /* c2 */ + MULTIPLY(tmp1, FIX(0.801745081)) + /* c6 */ + MULTIPLY(tmp2, FIX(0.379824504)) - /* c10 */ + MULTIPLY(tmp3, FIX(0.129109289)) - /* c12 */ + MULTIPLY(tmp4, FIX(0.608465700)) - /* c8 */ + MULTIPLY(tmp5, FIX(0.948429952)), /* c4 */ + CONST_BITS+1); + z1 = MULTIPLY(tmp0 - tmp2, FIX(0.875087516)) - /* (c4+c6)/2 */ + MULTIPLY(tmp3 - tmp4, FIX(0.330085509)) - /* (c2-c10)/2 */ + MULTIPLY(tmp1 - tmp5, FIX(0.239678205)); /* (c8-c12)/2 */ + z2 = MULTIPLY(tmp0 + tmp2, FIX(0.073342435)) - /* (c4-c6)/2 */ + MULTIPLY(tmp3 + tmp4, FIX(0.709910013)) + /* (c2+c10)/2 */ + MULTIPLY(tmp1 + tmp5, FIX(0.368787494)); /* (c8+c12)/2 */ + + dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(z1 + z2, CONST_BITS+1); + dataptr[DCTSIZE*6] = (DCTELEM) DESCALE(z1 - z2, CONST_BITS+1); + + /* Odd part */ + + tmp1 = MULTIPLY(tmp10 + tmp11, FIX(1.001514908)); /* c3 */ + tmp2 = MULTIPLY(tmp10 + tmp12, FIX(0.881514751)); /* c5 */ + tmp3 = MULTIPLY(tmp10 + tmp13, FIX(0.710284161)) + /* c7 */ + MULTIPLY(tmp14 + tmp15, FIX(0.256335874)); /* c11 */ + tmp0 = tmp1 + tmp2 + tmp3 - + MULTIPLY(tmp10, FIX(1.530003162)) + /* c3+c5+c7-c1 */ + MULTIPLY(tmp14, FIX(0.241438564)); /* c9-c11 */ + tmp4 = MULTIPLY(tmp14 - tmp15, FIX(0.710284161)) - /* c7 */ + MULTIPLY(tmp11 + tmp12, FIX(0.256335874)); /* c11 */ + tmp5 = MULTIPLY(tmp11 + tmp13, - FIX(0.881514751)); /* -c5 */ + tmp1 += tmp4 + tmp5 + + MULTIPLY(tmp11, FIX(0.634110155)) - /* c5+c9+c11-c3 */ + MULTIPLY(tmp14, FIX(1.773594819)); /* c1+c7 */ + tmp6 = MULTIPLY(tmp12 + tmp13, - FIX(0.497774438)); /* -c9 */ + tmp2 += tmp4 + tmp6 - + MULTIPLY(tmp12, FIX(1.190715098)) + /* c1+c5-c9-c11 */ + MULTIPLY(tmp15, FIX(1.711799069)); /* c3+c7 */ + tmp3 += tmp5 + tmp6 + + MULTIPLY(tmp13, FIX(1.670519935)) - /* c3+c5+c9-c7 */ + MULTIPLY(tmp15, FIX(1.319646532)); /* c1+c11 */ + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp0, CONST_BITS+1); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp1, CONST_BITS+1); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp2, CONST_BITS+1); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp3, CONST_BITS+1); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 14x14 sample block. + */ + +GLOBAL(void) +jpeg_fdct_14x14 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; + DCTELEM workspace[8*6]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT. + * cK represents sqrt(2) * cos(K*pi/28). + */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[13]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[12]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[11]); + tmp13 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[10]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[9]); + tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[8]); + tmp6 = GETJSAMPLE(elemptr[6]) + GETJSAMPLE(elemptr[7]); + + tmp10 = tmp0 + tmp6; + tmp14 = tmp0 - tmp6; + tmp11 = tmp1 + tmp5; + tmp15 = tmp1 - tmp5; + tmp12 = tmp2 + tmp4; + tmp16 = tmp2 - tmp4; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[13]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[12]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[11]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[10]); + tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[9]); + tmp5 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[8]); + tmp6 = GETJSAMPLE(elemptr[6]) - GETJSAMPLE(elemptr[7]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + (tmp10 + tmp11 + tmp12 + tmp13 - 14 * CENTERJSAMPLE); + tmp13 += tmp13; + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp13, FIX(1.274162392)) + /* c4 */ + MULTIPLY(tmp11 - tmp13, FIX(0.314692123)) - /* c12 */ + MULTIPLY(tmp12 - tmp13, FIX(0.881747734)), /* c8 */ + CONST_BITS); + + tmp10 = MULTIPLY(tmp14 + tmp15, FIX(1.105676686)); /* c6 */ + + dataptr[2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp14, FIX(0.273079590)) /* c2-c6 */ + + MULTIPLY(tmp16, FIX(0.613604268)), /* c10 */ + CONST_BITS); + dataptr[6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp15, FIX(1.719280954)) /* c6+c10 */ + - MULTIPLY(tmp16, FIX(1.378756276)), /* c2 */ + CONST_BITS); + + /* Odd part */ + + tmp10 = tmp1 + tmp2; + tmp11 = tmp5 - tmp4; + dataptr[7] = (DCTELEM) (tmp0 - tmp10 + tmp3 - tmp11 - tmp6); + tmp3 <<= CONST_BITS; + tmp10 = MULTIPLY(tmp10, - FIX(0.158341681)); /* -c13 */ + tmp11 = MULTIPLY(tmp11, FIX(1.405321284)); /* c1 */ + tmp10 += tmp11 - tmp3; + tmp11 = MULTIPLY(tmp0 + tmp2, FIX(1.197448846)) + /* c5 */ + MULTIPLY(tmp4 + tmp6, FIX(0.752406978)); /* c9 */ + dataptr[5] = (DCTELEM) + DESCALE(tmp10 + tmp11 - MULTIPLY(tmp2, FIX(2.373959773)) /* c3+c5-c13 */ + + MULTIPLY(tmp4, FIX(1.119999435)), /* c1+c11-c9 */ + CONST_BITS); + tmp12 = MULTIPLY(tmp0 + tmp1, FIX(1.334852607)) + /* c3 */ + MULTIPLY(tmp5 - tmp6, FIX(0.467085129)); /* c11 */ + dataptr[3] = (DCTELEM) + DESCALE(tmp10 + tmp12 - MULTIPLY(tmp1, FIX(0.424103948)) /* c3-c9-c13 */ + - MULTIPLY(tmp5, FIX(3.069855259)), /* c1+c5+c11 */ + CONST_BITS); + dataptr[1] = (DCTELEM) + DESCALE(tmp11 + tmp12 + tmp3 + tmp6 - + MULTIPLY(tmp0 + tmp6, FIX(1.126980169)), /* c3+c5-c1 */ + CONST_BITS); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 14) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/14)**2 = 16/49, which we partially + * fold into the constant multipliers and final shifting: + * cK now represents sqrt(2) * cos(K*pi/28) * 32/49. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*5]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*3]; + tmp13 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*2]; + tmp4 = dataptr[DCTSIZE*4] + wsptr[DCTSIZE*1]; + tmp5 = dataptr[DCTSIZE*5] + wsptr[DCTSIZE*0]; + tmp6 = dataptr[DCTSIZE*6] + dataptr[DCTSIZE*7]; + + tmp10 = tmp0 + tmp6; + tmp14 = tmp0 - tmp6; + tmp11 = tmp1 + tmp5; + tmp15 = tmp1 - tmp5; + tmp12 = tmp2 + tmp4; + tmp16 = tmp2 - tmp4; + + tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*5]; + tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*3]; + tmp3 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*2]; + tmp4 = dataptr[DCTSIZE*4] - wsptr[DCTSIZE*1]; + tmp5 = dataptr[DCTSIZE*5] - wsptr[DCTSIZE*0]; + tmp6 = dataptr[DCTSIZE*6] - dataptr[DCTSIZE*7]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp11 + tmp12 + tmp13, + FIX(0.653061224)), /* 32/49 */ + CONST_BITS+1); + tmp13 += tmp13; + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp13, FIX(0.832106052)) + /* c4 */ + MULTIPLY(tmp11 - tmp13, FIX(0.205513223)) - /* c12 */ + MULTIPLY(tmp12 - tmp13, FIX(0.575835255)), /* c8 */ + CONST_BITS+1); + + tmp10 = MULTIPLY(tmp14 + tmp15, FIX(0.722074570)); /* c6 */ + + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp14, FIX(0.178337691)) /* c2-c6 */ + + MULTIPLY(tmp16, FIX(0.400721155)), /* c10 */ + CONST_BITS+1); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp15, FIX(1.122795725)) /* c6+c10 */ + - MULTIPLY(tmp16, FIX(0.900412262)), /* c2 */ + CONST_BITS+1); + + /* Odd part */ + + tmp10 = tmp1 + tmp2; + tmp11 = tmp5 - tmp4; + dataptr[DCTSIZE*7] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 - tmp10 + tmp3 - tmp11 - tmp6, + FIX(0.653061224)), /* 32/49 */ + CONST_BITS+1); + tmp3 = MULTIPLY(tmp3 , FIX(0.653061224)); /* 32/49 */ + tmp10 = MULTIPLY(tmp10, - FIX(0.103406812)); /* -c13 */ + tmp11 = MULTIPLY(tmp11, FIX(0.917760839)); /* c1 */ + tmp10 += tmp11 - tmp3; + tmp11 = MULTIPLY(tmp0 + tmp2, FIX(0.782007410)) + /* c5 */ + MULTIPLY(tmp4 + tmp6, FIX(0.491367823)); /* c9 */ + dataptr[DCTSIZE*5] = (DCTELEM) + DESCALE(tmp10 + tmp11 - MULTIPLY(tmp2, FIX(1.550341076)) /* c3+c5-c13 */ + + MULTIPLY(tmp4, FIX(0.731428202)), /* c1+c11-c9 */ + CONST_BITS+1); + tmp12 = MULTIPLY(tmp0 + tmp1, FIX(0.871740478)) + /* c3 */ + MULTIPLY(tmp5 - tmp6, FIX(0.305035186)); /* c11 */ + dataptr[DCTSIZE*3] = (DCTELEM) + DESCALE(tmp10 + tmp12 - MULTIPLY(tmp1, FIX(0.276965844)) /* c3-c9-c13 */ + - MULTIPLY(tmp5, FIX(2.004803435)), /* c1+c5+c11 */ + CONST_BITS+1); + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(tmp11 + tmp12 + tmp3 + - MULTIPLY(tmp0, FIX(0.735987049)) /* c3+c5-c1 */ + - MULTIPLY(tmp6, FIX(0.082925825)), /* c9-c11-c13 */ + CONST_BITS+1); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 15x15 sample block. + */ + +GLOBAL(void) +jpeg_fdct_15x15 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; + INT32 z1, z2, z3; + DCTELEM workspace[8*7]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT. + * cK represents sqrt(2) * cos(K*pi/30). + */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[14]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[13]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[12]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[11]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[10]); + tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[9]); + tmp6 = GETJSAMPLE(elemptr[6]) + GETJSAMPLE(elemptr[8]); + tmp7 = GETJSAMPLE(elemptr[7]); + + tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[14]); + tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[13]); + tmp12 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[12]); + tmp13 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[11]); + tmp14 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[10]); + tmp15 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[9]); + tmp16 = GETJSAMPLE(elemptr[6]) - GETJSAMPLE(elemptr[8]); + + z1 = tmp0 + tmp4 + tmp5; + z2 = tmp1 + tmp3 + tmp6; + z3 = tmp2 + tmp7; + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) (z1 + z2 + z3 - 15 * CENTERJSAMPLE); + z3 += z3; + dataptr[6] = (DCTELEM) + DESCALE(MULTIPLY(z1 - z3, FIX(1.144122806)) - /* c6 */ + MULTIPLY(z2 - z3, FIX(0.437016024)), /* c12 */ + CONST_BITS); + tmp2 += ((tmp1 + tmp4) >> 1) - tmp7 - tmp7; + z1 = MULTIPLY(tmp3 - tmp2, FIX(1.531135173)) - /* c2+c14 */ + MULTIPLY(tmp6 - tmp2, FIX(2.238241955)); /* c4+c8 */ + z2 = MULTIPLY(tmp5 - tmp2, FIX(0.798468008)) - /* c8-c14 */ + MULTIPLY(tmp0 - tmp2, FIX(0.091361227)); /* c2-c4 */ + z3 = MULTIPLY(tmp0 - tmp3, FIX(1.383309603)) + /* c2 */ + MULTIPLY(tmp6 - tmp5, FIX(0.946293579)) + /* c8 */ + MULTIPLY(tmp1 - tmp4, FIX(0.790569415)); /* (c6+c12)/2 */ + + dataptr[2] = (DCTELEM) DESCALE(z1 + z3, CONST_BITS); + dataptr[4] = (DCTELEM) DESCALE(z2 + z3, CONST_BITS); + + /* Odd part */ + + tmp2 = MULTIPLY(tmp10 - tmp12 - tmp13 + tmp15 + tmp16, + FIX(1.224744871)); /* c5 */ + tmp1 = MULTIPLY(tmp10 - tmp14 - tmp15, FIX(1.344997024)) + /* c3 */ + MULTIPLY(tmp11 - tmp13 - tmp16, FIX(0.831253876)); /* c9 */ + tmp12 = MULTIPLY(tmp12, FIX(1.224744871)); /* c5 */ + tmp4 = MULTIPLY(tmp10 - tmp16, FIX(1.406466353)) + /* c1 */ + MULTIPLY(tmp11 + tmp14, FIX(1.344997024)) + /* c3 */ + MULTIPLY(tmp13 + tmp15, FIX(0.575212477)); /* c11 */ + tmp0 = MULTIPLY(tmp13, FIX(0.475753014)) - /* c7-c11 */ + MULTIPLY(tmp14, FIX(0.513743148)) + /* c3-c9 */ + MULTIPLY(tmp16, FIX(1.700497885)) + tmp4 + tmp12; /* c1+c13 */ + tmp3 = MULTIPLY(tmp10, - FIX(0.355500862)) - /* -(c1-c7) */ + MULTIPLY(tmp11, FIX(2.176250899)) - /* c3+c9 */ + MULTIPLY(tmp15, FIX(0.869244010)) + tmp4 - tmp12; /* c11+c13 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp0, CONST_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp1, CONST_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp2, CONST_BITS); + dataptr[7] = (DCTELEM) DESCALE(tmp3, CONST_BITS); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 15) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/15)**2 = 64/225, which we partially + * fold into the constant multipliers and final shifting: + * cK now represents sqrt(2) * cos(K*pi/30) * 256/225. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*6]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*5]; + tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*4]; + tmp3 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*3]; + tmp4 = dataptr[DCTSIZE*4] + wsptr[DCTSIZE*2]; + tmp5 = dataptr[DCTSIZE*5] + wsptr[DCTSIZE*1]; + tmp6 = dataptr[DCTSIZE*6] + wsptr[DCTSIZE*0]; + tmp7 = dataptr[DCTSIZE*7]; + + tmp10 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*6]; + tmp11 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*5]; + tmp12 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*4]; + tmp13 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*3]; + tmp14 = dataptr[DCTSIZE*4] - wsptr[DCTSIZE*2]; + tmp15 = dataptr[DCTSIZE*5] - wsptr[DCTSIZE*1]; + tmp16 = dataptr[DCTSIZE*6] - wsptr[DCTSIZE*0]; + + z1 = tmp0 + tmp4 + tmp5; + z2 = tmp1 + tmp3 + tmp6; + z3 = tmp2 + tmp7; + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(z1 + z2 + z3, FIX(1.137777778)), /* 256/225 */ + CONST_BITS+2); + z3 += z3; + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(MULTIPLY(z1 - z3, FIX(1.301757503)) - /* c6 */ + MULTIPLY(z2 - z3, FIX(0.497227121)), /* c12 */ + CONST_BITS+2); + tmp2 += ((tmp1 + tmp4) >> 1) - tmp7 - tmp7; + z1 = MULTIPLY(tmp3 - tmp2, FIX(1.742091575)) - /* c2+c14 */ + MULTIPLY(tmp6 - tmp2, FIX(2.546621957)); /* c4+c8 */ + z2 = MULTIPLY(tmp5 - tmp2, FIX(0.908479156)) - /* c8-c14 */ + MULTIPLY(tmp0 - tmp2, FIX(0.103948774)); /* c2-c4 */ + z3 = MULTIPLY(tmp0 - tmp3, FIX(1.573898926)) + /* c2 */ + MULTIPLY(tmp6 - tmp5, FIX(1.076671805)) + /* c8 */ + MULTIPLY(tmp1 - tmp4, FIX(0.899492312)); /* (c6+c12)/2 */ + + dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(z1 + z3, CONST_BITS+2); + dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(z2 + z3, CONST_BITS+2); + + /* Odd part */ + + tmp2 = MULTIPLY(tmp10 - tmp12 - tmp13 + tmp15 + tmp16, + FIX(1.393487498)); /* c5 */ + tmp1 = MULTIPLY(tmp10 - tmp14 - tmp15, FIX(1.530307725)) + /* c3 */ + MULTIPLY(tmp11 - tmp13 - tmp16, FIX(0.945782187)); /* c9 */ + tmp12 = MULTIPLY(tmp12, FIX(1.393487498)); /* c5 */ + tmp4 = MULTIPLY(tmp10 - tmp16, FIX(1.600246161)) + /* c1 */ + MULTIPLY(tmp11 + tmp14, FIX(1.530307725)) + /* c3 */ + MULTIPLY(tmp13 + tmp15, FIX(0.654463974)); /* c11 */ + tmp0 = MULTIPLY(tmp13, FIX(0.541301207)) - /* c7-c11 */ + MULTIPLY(tmp14, FIX(0.584525538)) + /* c3-c9 */ + MULTIPLY(tmp16, FIX(1.934788705)) + tmp4 + tmp12; /* c1+c13 */ + tmp3 = MULTIPLY(tmp10, - FIX(0.404480980)) - /* -(c1-c7) */ + MULTIPLY(tmp11, FIX(2.476089912)) - /* c3+c9 */ + MULTIPLY(tmp15, FIX(0.989006518)) + tmp4 - tmp12; /* c11+c13 */ + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp0, CONST_BITS+2); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp1, CONST_BITS+2); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp2, CONST_BITS+2); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp3, CONST_BITS+2); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 16x16 sample block. + */ + +GLOBAL(void) +jpeg_fdct_16x16 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16, tmp17; + DCTELEM workspace[DCTSIZE2]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * cK represents sqrt(2) * cos(K*pi/32). + */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[15]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[14]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[13]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[12]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[11]); + tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[10]); + tmp6 = GETJSAMPLE(elemptr[6]) + GETJSAMPLE(elemptr[9]); + tmp7 = GETJSAMPLE(elemptr[7]) + GETJSAMPLE(elemptr[8]); + + tmp10 = tmp0 + tmp7; + tmp14 = tmp0 - tmp7; + tmp11 = tmp1 + tmp6; + tmp15 = tmp1 - tmp6; + tmp12 = tmp2 + tmp5; + tmp16 = tmp2 - tmp5; + tmp13 = tmp3 + tmp4; + tmp17 = tmp3 - tmp4; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[15]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[14]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[13]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[12]); + tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[11]); + tmp5 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[10]); + tmp6 = GETJSAMPLE(elemptr[6]) - GETJSAMPLE(elemptr[9]); + tmp7 = GETJSAMPLE(elemptr[7]) - GETJSAMPLE(elemptr[8]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 + tmp12 + tmp13 - 16 * CENTERJSAMPLE) << PASS1_BITS); + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp13, FIX(1.306562965)) + /* c4[16] = c2[8] */ + MULTIPLY(tmp11 - tmp12, FIX_0_541196100), /* c12[16] = c6[8] */ + CONST_BITS-PASS1_BITS); + + tmp10 = MULTIPLY(tmp17 - tmp15, FIX(0.275899379)) + /* c14[16] = c7[8] */ + MULTIPLY(tmp14 - tmp16, FIX(1.387039845)); /* c2[16] = c1[8] */ + + dataptr[2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp15, FIX(1.451774982)) /* c6+c14 */ + + MULTIPLY(tmp16, FIX(2.172734804)), /* c2+c10 */ + CONST_BITS-PASS1_BITS); + dataptr[6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp14, FIX(0.211164243)) /* c2-c6 */ + - MULTIPLY(tmp17, FIX(1.061594338)), /* c10+c14 */ + CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp11 = MULTIPLY(tmp0 + tmp1, FIX(1.353318001)) + /* c3 */ + MULTIPLY(tmp6 - tmp7, FIX(0.410524528)); /* c13 */ + tmp12 = MULTIPLY(tmp0 + tmp2, FIX(1.247225013)) + /* c5 */ + MULTIPLY(tmp5 + tmp7, FIX(0.666655658)); /* c11 */ + tmp13 = MULTIPLY(tmp0 + tmp3, FIX(1.093201867)) + /* c7 */ + MULTIPLY(tmp4 - tmp7, FIX(0.897167586)); /* c9 */ + tmp14 = MULTIPLY(tmp1 + tmp2, FIX(0.138617169)) + /* c15 */ + MULTIPLY(tmp6 - tmp5, FIX(1.407403738)); /* c1 */ + tmp15 = MULTIPLY(tmp1 + tmp3, - FIX(0.666655658)) + /* -c11 */ + MULTIPLY(tmp4 + tmp6, - FIX(1.247225013)); /* -c5 */ + tmp16 = MULTIPLY(tmp2 + tmp3, - FIX(1.353318001)) + /* -c3 */ + MULTIPLY(tmp5 - tmp4, FIX(0.410524528)); /* c13 */ + tmp10 = tmp11 + tmp12 + tmp13 - + MULTIPLY(tmp0, FIX(2.286341144)) + /* c7+c5+c3-c1 */ + MULTIPLY(tmp7, FIX(0.779653625)); /* c15+c13-c11+c9 */ + tmp11 += tmp14 + tmp15 + MULTIPLY(tmp1, FIX(0.071888074)) /* c9-c3-c15+c11 */ + - MULTIPLY(tmp6, FIX(1.663905119)); /* c7+c13+c1-c5 */ + tmp12 += tmp14 + tmp16 - MULTIPLY(tmp2, FIX(1.125726048)) /* c7+c5+c15-c3 */ + + MULTIPLY(tmp5, FIX(1.227391138)); /* c9-c11+c1-c13 */ + tmp13 += tmp15 + tmp16 + MULTIPLY(tmp3, FIX(1.065388962)) /* c15+c3+c11-c7 */ + + MULTIPLY(tmp4, FIX(2.167985692)); /* c1+c13+c5-c9 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp10, CONST_BITS-PASS1_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp11, CONST_BITS-PASS1_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp12, CONST_BITS-PASS1_BITS); + dataptr[7] = (DCTELEM) DESCALE(tmp13, CONST_BITS-PASS1_BITS); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == DCTSIZE * 2) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/16)**2 = 1/2**2. + * cK represents sqrt(2) * cos(K*pi/32). + */ + + dataptr = data; + wsptr = workspace; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*4]; + tmp4 = dataptr[DCTSIZE*4] + wsptr[DCTSIZE*3]; + tmp5 = dataptr[DCTSIZE*5] + wsptr[DCTSIZE*2]; + tmp6 = dataptr[DCTSIZE*6] + wsptr[DCTSIZE*1]; + tmp7 = dataptr[DCTSIZE*7] + wsptr[DCTSIZE*0]; + + tmp10 = tmp0 + tmp7; + tmp14 = tmp0 - tmp7; + tmp11 = tmp1 + tmp6; + tmp15 = tmp1 - tmp6; + tmp12 = tmp2 + tmp5; + tmp16 = tmp2 - tmp5; + tmp13 = tmp3 + tmp4; + tmp17 = tmp3 - tmp4; + + tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*4]; + tmp4 = dataptr[DCTSIZE*4] - wsptr[DCTSIZE*3]; + tmp5 = dataptr[DCTSIZE*5] - wsptr[DCTSIZE*2]; + tmp6 = dataptr[DCTSIZE*6] - wsptr[DCTSIZE*1]; + tmp7 = dataptr[DCTSIZE*7] - wsptr[DCTSIZE*0]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(tmp10 + tmp11 + tmp12 + tmp13, PASS1_BITS+2); + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp13, FIX(1.306562965)) + /* c4[16] = c2[8] */ + MULTIPLY(tmp11 - tmp12, FIX_0_541196100), /* c12[16] = c6[8] */ + CONST_BITS+PASS1_BITS+2); + + tmp10 = MULTIPLY(tmp17 - tmp15, FIX(0.275899379)) + /* c14[16] = c7[8] */ + MULTIPLY(tmp14 - tmp16, FIX(1.387039845)); /* c2[16] = c1[8] */ + + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp15, FIX(1.451774982)) /* c6+c14 */ + + MULTIPLY(tmp16, FIX(2.172734804)), /* c2+10 */ + CONST_BITS+PASS1_BITS+2); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp14, FIX(0.211164243)) /* c2-c6 */ + - MULTIPLY(tmp17, FIX(1.061594338)), /* c10+c14 */ + CONST_BITS+PASS1_BITS+2); + + /* Odd part */ + + tmp11 = MULTIPLY(tmp0 + tmp1, FIX(1.353318001)) + /* c3 */ + MULTIPLY(tmp6 - tmp7, FIX(0.410524528)); /* c13 */ + tmp12 = MULTIPLY(tmp0 + tmp2, FIX(1.247225013)) + /* c5 */ + MULTIPLY(tmp5 + tmp7, FIX(0.666655658)); /* c11 */ + tmp13 = MULTIPLY(tmp0 + tmp3, FIX(1.093201867)) + /* c7 */ + MULTIPLY(tmp4 - tmp7, FIX(0.897167586)); /* c9 */ + tmp14 = MULTIPLY(tmp1 + tmp2, FIX(0.138617169)) + /* c15 */ + MULTIPLY(tmp6 - tmp5, FIX(1.407403738)); /* c1 */ + tmp15 = MULTIPLY(tmp1 + tmp3, - FIX(0.666655658)) + /* -c11 */ + MULTIPLY(tmp4 + tmp6, - FIX(1.247225013)); /* -c5 */ + tmp16 = MULTIPLY(tmp2 + tmp3, - FIX(1.353318001)) + /* -c3 */ + MULTIPLY(tmp5 - tmp4, FIX(0.410524528)); /* c13 */ + tmp10 = tmp11 + tmp12 + tmp13 - + MULTIPLY(tmp0, FIX(2.286341144)) + /* c7+c5+c3-c1 */ + MULTIPLY(tmp7, FIX(0.779653625)); /* c15+c13-c11+c9 */ + tmp11 += tmp14 + tmp15 + MULTIPLY(tmp1, FIX(0.071888074)) /* c9-c3-c15+c11 */ + - MULTIPLY(tmp6, FIX(1.663905119)); /* c7+c13+c1-c5 */ + tmp12 += tmp14 + tmp16 - MULTIPLY(tmp2, FIX(1.125726048)) /* c7+c5+c15-c3 */ + + MULTIPLY(tmp5, FIX(1.227391138)); /* c9-c11+c1-c13 */ + tmp13 += tmp15 + tmp16 + MULTIPLY(tmp3, FIX(1.065388962)) /* c15+c3+c11-c7 */ + + MULTIPLY(tmp4, FIX(2.167985692)); /* c1+c13+c5-c9 */ + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp10, CONST_BITS+PASS1_BITS+2); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp11, CONST_BITS+PASS1_BITS+2); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp12, CONST_BITS+PASS1_BITS+2); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp13, CONST_BITS+PASS1_BITS+2); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 16x8 sample block. + * + * 16-point FDCT in pass 1 (rows), 8-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_16x8 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16, tmp17; + INT32 z1; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * 16-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/32). + */ + + dataptr = data; + ctr = 0; + for (ctr = 0; ctr < DCTSIZE; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[15]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[14]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[13]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[12]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[11]); + tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[10]); + tmp6 = GETJSAMPLE(elemptr[6]) + GETJSAMPLE(elemptr[9]); + tmp7 = GETJSAMPLE(elemptr[7]) + GETJSAMPLE(elemptr[8]); + + tmp10 = tmp0 + tmp7; + tmp14 = tmp0 - tmp7; + tmp11 = tmp1 + tmp6; + tmp15 = tmp1 - tmp6; + tmp12 = tmp2 + tmp5; + tmp16 = tmp2 - tmp5; + tmp13 = tmp3 + tmp4; + tmp17 = tmp3 - tmp4; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[15]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[14]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[13]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[12]); + tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[11]); + tmp5 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[10]); + tmp6 = GETJSAMPLE(elemptr[6]) - GETJSAMPLE(elemptr[9]); + tmp7 = GETJSAMPLE(elemptr[7]) - GETJSAMPLE(elemptr[8]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 + tmp12 + tmp13 - 16 * CENTERJSAMPLE) << PASS1_BITS); + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp13, FIX(1.306562965)) + /* c4[16] = c2[8] */ + MULTIPLY(tmp11 - tmp12, FIX_0_541196100), /* c12[16] = c6[8] */ + CONST_BITS-PASS1_BITS); + + tmp10 = MULTIPLY(tmp17 - tmp15, FIX(0.275899379)) + /* c14[16] = c7[8] */ + MULTIPLY(tmp14 - tmp16, FIX(1.387039845)); /* c2[16] = c1[8] */ + + dataptr[2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp15, FIX(1.451774982)) /* c6+c14 */ + + MULTIPLY(tmp16, FIX(2.172734804)), /* c2+c10 */ + CONST_BITS-PASS1_BITS); + dataptr[6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp14, FIX(0.211164243)) /* c2-c6 */ + - MULTIPLY(tmp17, FIX(1.061594338)), /* c10+c14 */ + CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp11 = MULTIPLY(tmp0 + tmp1, FIX(1.353318001)) + /* c3 */ + MULTIPLY(tmp6 - tmp7, FIX(0.410524528)); /* c13 */ + tmp12 = MULTIPLY(tmp0 + tmp2, FIX(1.247225013)) + /* c5 */ + MULTIPLY(tmp5 + tmp7, FIX(0.666655658)); /* c11 */ + tmp13 = MULTIPLY(tmp0 + tmp3, FIX(1.093201867)) + /* c7 */ + MULTIPLY(tmp4 - tmp7, FIX(0.897167586)); /* c9 */ + tmp14 = MULTIPLY(tmp1 + tmp2, FIX(0.138617169)) + /* c15 */ + MULTIPLY(tmp6 - tmp5, FIX(1.407403738)); /* c1 */ + tmp15 = MULTIPLY(tmp1 + tmp3, - FIX(0.666655658)) + /* -c11 */ + MULTIPLY(tmp4 + tmp6, - FIX(1.247225013)); /* -c5 */ + tmp16 = MULTIPLY(tmp2 + tmp3, - FIX(1.353318001)) + /* -c3 */ + MULTIPLY(tmp5 - tmp4, FIX(0.410524528)); /* c13 */ + tmp10 = tmp11 + tmp12 + tmp13 - + MULTIPLY(tmp0, FIX(2.286341144)) + /* c7+c5+c3-c1 */ + MULTIPLY(tmp7, FIX(0.779653625)); /* c15+c13-c11+c9 */ + tmp11 += tmp14 + tmp15 + MULTIPLY(tmp1, FIX(0.071888074)) /* c9-c3-c15+c11 */ + - MULTIPLY(tmp6, FIX(1.663905119)); /* c7+c13+c1-c5 */ + tmp12 += tmp14 + tmp16 - MULTIPLY(tmp2, FIX(1.125726048)) /* c7+c5+c15-c3 */ + + MULTIPLY(tmp5, FIX(1.227391138)); /* c9-c11+c1-c13 */ + tmp13 += tmp15 + tmp16 + MULTIPLY(tmp3, FIX(1.065388962)) /* c15+c3+c11-c7 */ + + MULTIPLY(tmp4, FIX(2.167985692)); /* c1+c13+c5-c9 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp10, CONST_BITS-PASS1_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp11, CONST_BITS-PASS1_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp12, CONST_BITS-PASS1_BITS); + dataptr[7] = (DCTELEM) DESCALE(tmp13, CONST_BITS-PASS1_BITS); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by 8/16 = 1/2. + * 8-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/16). + */ + + dataptr = data; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part per LL&M figure 1 --- note that published figure is faulty; + * rotator "c1" should be "c6". + */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; + + tmp10 = tmp0 + tmp3; + tmp12 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp13 = tmp1 - tmp2; + + tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; + + dataptr[DCTSIZE*0] = (DCTELEM) DESCALE(tmp10 + tmp11, PASS1_BITS+1); + dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(tmp10 - tmp11, PASS1_BITS+1); + + z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); /* c6 */ + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(z1 + MULTIPLY(tmp12, FIX_0_765366865), /* c2-c6 */ + CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(z1 - MULTIPLY(tmp13, FIX_1_847759065), /* c2+c6 */ + CONST_BITS+PASS1_BITS+1); + + /* Odd part per figure 8 --- note paper omits factor of sqrt(2). + * i0..i3 in the paper are tmp0..tmp3 here. + */ + + tmp12 = tmp0 + tmp2; + tmp13 = tmp1 + tmp3; + + z1 = MULTIPLY(tmp12 + tmp13, FIX_1_175875602); /* c3 */ + tmp12 = MULTIPLY(tmp12, - FIX_0_390180644); /* -c3+c5 */ + tmp13 = MULTIPLY(tmp13, - FIX_1_961570560); /* -c3-c5 */ + tmp12 += z1; + tmp13 += z1; + + z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* -c3+c7 */ + tmp0 = MULTIPLY(tmp0, FIX_1_501321110); /* c1+c3-c5-c7 */ + tmp3 = MULTIPLY(tmp3, FIX_0_298631336); /* -c1+c3+c5-c7 */ + tmp0 += z1 + tmp12; + tmp3 += z1 + tmp13; + + z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* -c1-c3 */ + tmp1 = MULTIPLY(tmp1, FIX_3_072711026); /* c1+c3+c5-c7 */ + tmp2 = MULTIPLY(tmp2, FIX_2_053119869); /* c1+c3-c5+c7 */ + tmp1 += z1 + tmp13; + tmp2 += z1 + tmp12; + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp0, CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp1, CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp2, CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp3, CONST_BITS+PASS1_BITS+1); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 14x7 sample block. + * + * 14-point FDCT in pass 1 (rows), 7-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_14x7 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; + INT32 z1, z2, z3; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Zero bottom row of output coefficient block. */ + MEMZERO(&data[DCTSIZE*7], SIZEOF(DCTELEM) * DCTSIZE); + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * 14-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/28). + */ + + dataptr = data; + for (ctr = 0; ctr < 7; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[13]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[12]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[11]); + tmp13 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[10]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[9]); + tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[8]); + tmp6 = GETJSAMPLE(elemptr[6]) + GETJSAMPLE(elemptr[7]); + + tmp10 = tmp0 + tmp6; + tmp14 = tmp0 - tmp6; + tmp11 = tmp1 + tmp5; + tmp15 = tmp1 - tmp5; + tmp12 = tmp2 + tmp4; + tmp16 = tmp2 - tmp4; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[13]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[12]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[11]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[10]); + tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[9]); + tmp5 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[8]); + tmp6 = GETJSAMPLE(elemptr[6]) - GETJSAMPLE(elemptr[7]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 + tmp12 + tmp13 - 14 * CENTERJSAMPLE) << PASS1_BITS); + tmp13 += tmp13; + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp13, FIX(1.274162392)) + /* c4 */ + MULTIPLY(tmp11 - tmp13, FIX(0.314692123)) - /* c12 */ + MULTIPLY(tmp12 - tmp13, FIX(0.881747734)), /* c8 */ + CONST_BITS-PASS1_BITS); + + tmp10 = MULTIPLY(tmp14 + tmp15, FIX(1.105676686)); /* c6 */ + + dataptr[2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp14, FIX(0.273079590)) /* c2-c6 */ + + MULTIPLY(tmp16, FIX(0.613604268)), /* c10 */ + CONST_BITS-PASS1_BITS); + dataptr[6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp15, FIX(1.719280954)) /* c6+c10 */ + - MULTIPLY(tmp16, FIX(1.378756276)), /* c2 */ + CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp10 = tmp1 + tmp2; + tmp11 = tmp5 - tmp4; + dataptr[7] = (DCTELEM) ((tmp0 - tmp10 + tmp3 - tmp11 - tmp6) << PASS1_BITS); + tmp3 <<= CONST_BITS; + tmp10 = MULTIPLY(tmp10, - FIX(0.158341681)); /* -c13 */ + tmp11 = MULTIPLY(tmp11, FIX(1.405321284)); /* c1 */ + tmp10 += tmp11 - tmp3; + tmp11 = MULTIPLY(tmp0 + tmp2, FIX(1.197448846)) + /* c5 */ + MULTIPLY(tmp4 + tmp6, FIX(0.752406978)); /* c9 */ + dataptr[5] = (DCTELEM) + DESCALE(tmp10 + tmp11 - MULTIPLY(tmp2, FIX(2.373959773)) /* c3+c5-c13 */ + + MULTIPLY(tmp4, FIX(1.119999435)), /* c1+c11-c9 */ + CONST_BITS-PASS1_BITS); + tmp12 = MULTIPLY(tmp0 + tmp1, FIX(1.334852607)) + /* c3 */ + MULTIPLY(tmp5 - tmp6, FIX(0.467085129)); /* c11 */ + dataptr[3] = (DCTELEM) + DESCALE(tmp10 + tmp12 - MULTIPLY(tmp1, FIX(0.424103948)) /* c3-c9-c13 */ + - MULTIPLY(tmp5, FIX(3.069855259)), /* c1+c5+c11 */ + CONST_BITS-PASS1_BITS); + dataptr[1] = (DCTELEM) + DESCALE(tmp11 + tmp12 + tmp3 + tmp6 - + MULTIPLY(tmp0 + tmp6, FIX(1.126980169)), /* c3+c5-c1 */ + CONST_BITS-PASS1_BITS); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/14)*(8/7) = 32/49, which we + * partially fold into the constant multipliers and final shifting: + * 7-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/14) * 64/49. + */ + + dataptr = data; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*6]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*5]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*4]; + tmp3 = dataptr[DCTSIZE*3]; + + tmp10 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*6]; + tmp11 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*5]; + tmp12 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*4]; + + z1 = tmp0 + tmp2; + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(z1 + tmp1 + tmp3, FIX(1.306122449)), /* 64/49 */ + CONST_BITS+PASS1_BITS+1); + tmp3 += tmp3; + z1 -= tmp3; + z1 -= tmp3; + z1 = MULTIPLY(z1, FIX(0.461784020)); /* (c2+c6-c4)/2 */ + z2 = MULTIPLY(tmp0 - tmp2, FIX(1.202428084)); /* (c2+c4-c6)/2 */ + z3 = MULTIPLY(tmp1 - tmp2, FIX(0.411026446)); /* c6 */ + dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(z1 + z2 + z3, CONST_BITS+PASS1_BITS+1); + z1 -= z2; + z2 = MULTIPLY(tmp0 - tmp1, FIX(1.151670509)); /* c4 */ + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(z2 + z3 - MULTIPLY(tmp1 - tmp3, FIX(0.923568041)), /* c2+c6-c4 */ + CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*6] = (DCTELEM) DESCALE(z1 + z2, CONST_BITS+PASS1_BITS+1); + + /* Odd part */ + + tmp1 = MULTIPLY(tmp10 + tmp11, FIX(1.221765677)); /* (c3+c1-c5)/2 */ + tmp2 = MULTIPLY(tmp10 - tmp11, FIX(0.222383464)); /* (c3+c5-c1)/2 */ + tmp0 = tmp1 - tmp2; + tmp1 += tmp2; + tmp2 = MULTIPLY(tmp11 + tmp12, - FIX(1.800824523)); /* -c1 */ + tmp1 += tmp2; + tmp3 = MULTIPLY(tmp10 + tmp12, FIX(0.801442310)); /* c5 */ + tmp0 += tmp3; + tmp2 += tmp3 + MULTIPLY(tmp12, FIX(2.443531355)); /* c3+c1-c5 */ + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp0, CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp1, CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp2, CONST_BITS+PASS1_BITS+1); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 12x6 sample block. + * + * 12-point FDCT in pass 1 (rows), 6-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_12x6 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Zero 2 bottom rows of output coefficient block. */ + MEMZERO(&data[DCTSIZE*6], SIZEOF(DCTELEM) * DCTSIZE * 2); + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * 12-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/24). + */ + + dataptr = data; + for (ctr = 0; ctr < 6; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[11]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[10]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[9]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[8]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[7]); + tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[6]); + + tmp10 = tmp0 + tmp5; + tmp13 = tmp0 - tmp5; + tmp11 = tmp1 + tmp4; + tmp14 = tmp1 - tmp4; + tmp12 = tmp2 + tmp3; + tmp15 = tmp2 - tmp3; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[11]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[10]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[9]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[8]); + tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[7]); + tmp5 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[6]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 + tmp12 - 12 * CENTERJSAMPLE) << PASS1_BITS); + dataptr[6] = (DCTELEM) ((tmp13 - tmp14 - tmp15) << PASS1_BITS); + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.224744871)), /* c4 */ + CONST_BITS-PASS1_BITS); + dataptr[2] = (DCTELEM) + DESCALE(tmp14 - tmp15 + MULTIPLY(tmp13 + tmp15, FIX(1.366025404)), /* c2 */ + CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp1 + tmp4, FIX_0_541196100); /* c9 */ + tmp14 = tmp10 + MULTIPLY(tmp1, FIX_0_765366865); /* c3-c9 */ + tmp15 = tmp10 - MULTIPLY(tmp4, FIX_1_847759065); /* c3+c9 */ + tmp12 = MULTIPLY(tmp0 + tmp2, FIX(1.121971054)); /* c5 */ + tmp13 = MULTIPLY(tmp0 + tmp3, FIX(0.860918669)); /* c7 */ + tmp10 = tmp12 + tmp13 + tmp14 - MULTIPLY(tmp0, FIX(0.580774953)) /* c5+c7-c1 */ + + MULTIPLY(tmp5, FIX(0.184591911)); /* c11 */ + tmp11 = MULTIPLY(tmp2 + tmp3, - FIX(0.184591911)); /* -c11 */ + tmp12 += tmp11 - tmp15 - MULTIPLY(tmp2, FIX(2.339493912)) /* c1+c5-c11 */ + + MULTIPLY(tmp5, FIX(0.860918669)); /* c7 */ + tmp13 += tmp11 - tmp14 + MULTIPLY(tmp3, FIX(0.725788011)) /* c1+c11-c7 */ + - MULTIPLY(tmp5, FIX(1.121971054)); /* c5 */ + tmp11 = tmp15 + MULTIPLY(tmp0 - tmp3, FIX(1.306562965)) /* c3 */ + - MULTIPLY(tmp2 + tmp5, FIX_0_541196100); /* c9 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp10, CONST_BITS-PASS1_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp11, CONST_BITS-PASS1_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp12, CONST_BITS-PASS1_BITS); + dataptr[7] = (DCTELEM) DESCALE(tmp13, CONST_BITS-PASS1_BITS); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/12)*(8/6) = 8/9, which we + * partially fold into the constant multipliers and final shifting: + * 6-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/12) * 16/9. + */ + + dataptr = data; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*5]; + tmp11 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*3]; + + tmp10 = tmp0 + tmp2; + tmp12 = tmp0 - tmp2; + + tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*5]; + tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*3]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp11, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(MULTIPLY(tmp12, FIX(2.177324216)), /* c2 */ + CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp11 - tmp11, FIX(1.257078722)), /* c4 */ + CONST_BITS+PASS1_BITS+1); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp0 + tmp2, FIX(0.650711829)); /* c5 */ + + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp0 + tmp1, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*3] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 - tmp1 - tmp2, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*5] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp2 - tmp1, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS+1); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 10x5 sample block. + * + * 10-point FDCT in pass 1 (rows), 5-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_10x5 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Zero 3 bottom rows of output coefficient block. */ + MEMZERO(&data[DCTSIZE*5], SIZEOF(DCTELEM) * DCTSIZE * 3); + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * 10-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/20). + */ + + dataptr = data; + for (ctr = 0; ctr < 5; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[9]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[8]); + tmp12 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[7]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[6]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[5]); + + tmp10 = tmp0 + tmp4; + tmp13 = tmp0 - tmp4; + tmp11 = tmp1 + tmp3; + tmp14 = tmp1 - tmp3; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[9]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[8]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[7]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[6]); + tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[5]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 + tmp12 - 10 * CENTERJSAMPLE) << PASS1_BITS); + tmp12 += tmp12; + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.144122806)) - /* c4 */ + MULTIPLY(tmp11 - tmp12, FIX(0.437016024)), /* c8 */ + CONST_BITS-PASS1_BITS); + tmp10 = MULTIPLY(tmp13 + tmp14, FIX(0.831253876)); /* c6 */ + dataptr[2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp13, FIX(0.513743148)), /* c2-c6 */ + CONST_BITS-PASS1_BITS); + dataptr[6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp14, FIX(2.176250899)), /* c2+c6 */ + CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp10 = tmp0 + tmp4; + tmp11 = tmp1 - tmp3; + dataptr[5] = (DCTELEM) ((tmp10 - tmp11 - tmp2) << PASS1_BITS); + tmp2 <<= CONST_BITS; + dataptr[1] = (DCTELEM) + DESCALE(MULTIPLY(tmp0, FIX(1.396802247)) + /* c1 */ + MULTIPLY(tmp1, FIX(1.260073511)) + tmp2 + /* c3 */ + MULTIPLY(tmp3, FIX(0.642039522)) + /* c7 */ + MULTIPLY(tmp4, FIX(0.221231742)), /* c9 */ + CONST_BITS-PASS1_BITS); + tmp12 = MULTIPLY(tmp0 - tmp4, FIX(0.951056516)) - /* (c3+c7)/2 */ + MULTIPLY(tmp1 + tmp3, FIX(0.587785252)); /* (c1-c9)/2 */ + tmp13 = MULTIPLY(tmp10 + tmp11, FIX(0.309016994)) + /* (c3-c7)/2 */ + (tmp11 << (CONST_BITS - 1)) - tmp2; + dataptr[3] = (DCTELEM) DESCALE(tmp12 + tmp13, CONST_BITS-PASS1_BITS); + dataptr[7] = (DCTELEM) DESCALE(tmp12 - tmp13, CONST_BITS-PASS1_BITS); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/10)*(8/5) = 32/25, which we + * fold into the constant multipliers: + * 5-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/10) * 32/25. + */ + + dataptr = data; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*4]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*3]; + tmp2 = dataptr[DCTSIZE*2]; + + tmp10 = tmp0 + tmp1; + tmp11 = tmp0 - tmp1; + + tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*4]; + tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*3]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp2, FIX(1.28)), /* 32/25 */ + CONST_BITS+PASS1_BITS); + tmp11 = MULTIPLY(tmp11, FIX(1.011928851)); /* (c2+c4)/2 */ + tmp10 -= tmp2 << 2; + tmp10 = MULTIPLY(tmp10, FIX(0.452548340)); /* (c2-c4)/2 */ + dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(tmp11 + tmp10, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(tmp11 - tmp10, CONST_BITS+PASS1_BITS); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp0 + tmp1, FIX(1.064004961)); /* c3 */ + + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp0, FIX(0.657591230)), /* c1-c3 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp1, FIX(2.785601151)), /* c1+c3 */ + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on an 8x4 sample block. + * + * 8-point FDCT in pass 1 (rows), 4-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_8x4 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3; + INT32 tmp10, tmp11, tmp12, tmp13; + INT32 z1; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Zero 4 bottom rows of output coefficient block. */ + MEMZERO(&data[DCTSIZE*4], SIZEOF(DCTELEM) * DCTSIZE * 4); + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * We must also scale the output by 8/4 = 2, which we add here. + * 8-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/16). + */ + + dataptr = data; + for (ctr = 0; ctr < 4; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part per LL&M figure 1 --- note that published figure is faulty; + * rotator "c1" should be "c6". + */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[7]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[6]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[5]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[4]); + + tmp10 = tmp0 + tmp3; + tmp12 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp13 = tmp1 - tmp2; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[7]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[6]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[5]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[4]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 - 8 * CENTERJSAMPLE) << (PASS1_BITS+1)); + dataptr[4] = (DCTELEM) ((tmp10 - tmp11) << (PASS1_BITS+1)); + + z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-2); + + dataptr[2] = (DCTELEM) + RIGHT_SHIFT(z1 + MULTIPLY(tmp12, FIX_0_765366865), /* c2-c6 */ + CONST_BITS-PASS1_BITS-1); + dataptr[6] = (DCTELEM) + RIGHT_SHIFT(z1 - MULTIPLY(tmp13, FIX_1_847759065), /* c2+c6 */ + CONST_BITS-PASS1_BITS-1); + + /* Odd part per figure 8 --- note paper omits factor of sqrt(2). + * i0..i3 in the paper are tmp0..tmp3 here. + */ + + tmp12 = tmp0 + tmp2; + tmp13 = tmp1 + tmp3; + + z1 = MULTIPLY(tmp12 + tmp13, FIX_1_175875602); /* c3 */ + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-2); + + tmp12 = MULTIPLY(tmp12, - FIX_0_390180644); /* -c3+c5 */ + tmp13 = MULTIPLY(tmp13, - FIX_1_961570560); /* -c3-c5 */ + tmp12 += z1; + tmp13 += z1; + + z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* -c3+c7 */ + tmp0 = MULTIPLY(tmp0, FIX_1_501321110); /* c1+c3-c5-c7 */ + tmp3 = MULTIPLY(tmp3, FIX_0_298631336); /* -c1+c3+c5-c7 */ + tmp0 += z1 + tmp12; + tmp3 += z1 + tmp13; + + z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* -c1-c3 */ + tmp1 = MULTIPLY(tmp1, FIX_3_072711026); /* c1+c3+c5-c7 */ + tmp2 = MULTIPLY(tmp2, FIX_2_053119869); /* c1+c3-c5+c7 */ + tmp1 += z1 + tmp13; + tmp2 += z1 + tmp12; + + dataptr[1] = (DCTELEM) RIGHT_SHIFT(tmp0, CONST_BITS-PASS1_BITS-1); + dataptr[3] = (DCTELEM) RIGHT_SHIFT(tmp1, CONST_BITS-PASS1_BITS-1); + dataptr[5] = (DCTELEM) RIGHT_SHIFT(tmp2, CONST_BITS-PASS1_BITS-1); + dataptr[7] = (DCTELEM) RIGHT_SHIFT(tmp3, CONST_BITS-PASS1_BITS-1); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * 4-point FDCT kernel, + * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point FDCT]. + */ + + dataptr = data; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*3] + (ONE << (PASS1_BITS-1)); + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*2]; + + tmp10 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*3]; + tmp11 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*2]; + + dataptr[DCTSIZE*0] = (DCTELEM) RIGHT_SHIFT(tmp0 + tmp1, PASS1_BITS); + dataptr[DCTSIZE*2] = (DCTELEM) RIGHT_SHIFT(tmp0 - tmp1, PASS1_BITS); + + /* Odd part */ + + tmp0 = MULTIPLY(tmp10 + tmp11, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS+PASS1_BITS-1); + + dataptr[DCTSIZE*1] = (DCTELEM) + RIGHT_SHIFT(tmp0 + MULTIPLY(tmp10, FIX_0_765366865), /* c2-c6 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) + RIGHT_SHIFT(tmp0 - MULTIPLY(tmp11, FIX_1_847759065), /* c2+c6 */ + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 6x3 sample block. + * + * 6-point FDCT in pass 1 (rows), 3-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_6x3 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2; + INT32 tmp10, tmp11, tmp12; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * We scale the results further by 2 as part of output adaption + * scaling for different DCT size. + * 6-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/12). + */ + + dataptr = data; + for (ctr = 0; ctr < 3; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[5]); + tmp11 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[4]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[3]); + + tmp10 = tmp0 + tmp2; + tmp12 = tmp0 - tmp2; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[5]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[4]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[3]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 - 6 * CENTERJSAMPLE) << (PASS1_BITS+1)); + dataptr[2] = (DCTELEM) + DESCALE(MULTIPLY(tmp12, FIX(1.224744871)), /* c2 */ + CONST_BITS-PASS1_BITS-1); + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp11 - tmp11, FIX(0.707106781)), /* c4 */ + CONST_BITS-PASS1_BITS-1); + + /* Odd part */ + + tmp10 = DESCALE(MULTIPLY(tmp0 + tmp2, FIX(0.366025404)), /* c5 */ + CONST_BITS-PASS1_BITS-1); + + dataptr[1] = (DCTELEM) (tmp10 + ((tmp0 + tmp1) << (PASS1_BITS+1))); + dataptr[3] = (DCTELEM) ((tmp0 - tmp1 - tmp2) << (PASS1_BITS+1)); + dataptr[5] = (DCTELEM) (tmp10 + ((tmp2 - tmp1) << (PASS1_BITS+1))); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/6)*(8/3) = 32/9, which we partially + * fold into the constant multipliers (other part was done in pass 1): + * 3-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/6) * 16/9. + */ + + dataptr = data; + for (ctr = 0; ctr < 6; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*2]; + tmp1 = dataptr[DCTSIZE*1]; + + tmp2 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*2]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 + tmp1, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 - tmp1 - tmp1, FIX(1.257078722)), /* c2 */ + CONST_BITS+PASS1_BITS); + + /* Odd part */ + + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(MULTIPLY(tmp2, FIX(2.177324216)), /* c1 */ + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 4x2 sample block. + * + * 4-point FDCT in pass 1 (rows), 2-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_4x2 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1; + INT32 tmp10, tmp11; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * We must also scale the output by (8/4)*(8/2) = 2**3, which we add here. + * 4-point FDCT kernel, + * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point FDCT]. + */ + + dataptr = data; + for (ctr = 0; ctr < 2; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[3]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[2]); + + tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[3]); + tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[2]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((tmp0 + tmp1 - 4 * CENTERJSAMPLE) << (PASS1_BITS+3)); + dataptr[2] = (DCTELEM) ((tmp0 - tmp1) << (PASS1_BITS+3)); + + /* Odd part */ + + tmp0 = MULTIPLY(tmp10 + tmp11, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-PASS1_BITS-4); + + dataptr[1] = (DCTELEM) + RIGHT_SHIFT(tmp0 + MULTIPLY(tmp10, FIX_0_765366865), /* c2-c6 */ + CONST_BITS-PASS1_BITS-3); + dataptr[3] = (DCTELEM) + RIGHT_SHIFT(tmp0 - MULTIPLY(tmp11, FIX_1_847759065), /* c2+c6 */ + CONST_BITS-PASS1_BITS-3); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + */ + + dataptr = data; + for (ctr = 0; ctr < 4; ctr++) { + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp0 = dataptr[DCTSIZE*0] + (ONE << (PASS1_BITS-1)); + tmp1 = dataptr[DCTSIZE*1]; + + dataptr[DCTSIZE*0] = (DCTELEM) RIGHT_SHIFT(tmp0 + tmp1, PASS1_BITS); + + /* Odd part */ + + dataptr[DCTSIZE*1] = (DCTELEM) RIGHT_SHIFT(tmp0 - tmp1, PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 2x1 sample block. + * + * 2-point FDCT in pass 1 (rows), 1-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_2x1 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + DCTELEM tmp0, tmp1; + JSAMPROW elemptr; + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + elemptr = sample_data[0] + start_col; + + tmp0 = GETJSAMPLE(elemptr[0]); + tmp1 = GETJSAMPLE(elemptr[1]); + + /* We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/2)*(8/1) = 2**5. + */ + + /* Even part */ + + /* Apply unsigned->signed conversion. */ + data[0] = (tmp0 + tmp1 - 2 * CENTERJSAMPLE) << 5; + + /* Odd part */ + + data[1] = (tmp0 - tmp1) << 5; +} + + +/* + * Perform the forward DCT on an 8x16 sample block. + * + * 8-point FDCT in pass 1 (rows), 16-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_8x16 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16, tmp17; + INT32 z1; + DCTELEM workspace[DCTSIZE2]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * 8-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/16). + */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part per LL&M figure 1 --- note that published figure is faulty; + * rotator "c1" should be "c6". + */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[7]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[6]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[5]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[4]); + + tmp10 = tmp0 + tmp3; + tmp12 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp13 = tmp1 - tmp2; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[7]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[6]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[5]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[4]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) ((tmp10 + tmp11 - 8 * CENTERJSAMPLE) << PASS1_BITS); + dataptr[4] = (DCTELEM) ((tmp10 - tmp11) << PASS1_BITS); + + z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); /* c6 */ + dataptr[2] = (DCTELEM) + DESCALE(z1 + MULTIPLY(tmp12, FIX_0_765366865), /* c2-c6 */ + CONST_BITS-PASS1_BITS); + dataptr[6] = (DCTELEM) + DESCALE(z1 - MULTIPLY(tmp13, FIX_1_847759065), /* c2+c6 */ + CONST_BITS-PASS1_BITS); + + /* Odd part per figure 8 --- note paper omits factor of sqrt(2). + * i0..i3 in the paper are tmp0..tmp3 here. + */ + + tmp12 = tmp0 + tmp2; + tmp13 = tmp1 + tmp3; + + z1 = MULTIPLY(tmp12 + tmp13, FIX_1_175875602); /* c3 */ + tmp12 = MULTIPLY(tmp12, - FIX_0_390180644); /* -c3+c5 */ + tmp13 = MULTIPLY(tmp13, - FIX_1_961570560); /* -c3-c5 */ + tmp12 += z1; + tmp13 += z1; + + z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* -c3+c7 */ + tmp0 = MULTIPLY(tmp0, FIX_1_501321110); /* c1+c3-c5-c7 */ + tmp3 = MULTIPLY(tmp3, FIX_0_298631336); /* -c1+c3+c5-c7 */ + tmp0 += z1 + tmp12; + tmp3 += z1 + tmp13; + + z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* -c1-c3 */ + tmp1 = MULTIPLY(tmp1, FIX_3_072711026); /* c1+c3+c5-c7 */ + tmp2 = MULTIPLY(tmp2, FIX_2_053119869); /* c1+c3-c5+c7 */ + tmp1 += z1 + tmp13; + tmp2 += z1 + tmp12; + + dataptr[1] = (DCTELEM) DESCALE(tmp0, CONST_BITS-PASS1_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp1, CONST_BITS-PASS1_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp2, CONST_BITS-PASS1_BITS); + dataptr[7] = (DCTELEM) DESCALE(tmp3, CONST_BITS-PASS1_BITS); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == DCTSIZE * 2) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by 8/16 = 1/2. + * 16-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/32). + */ + + dataptr = data; + wsptr = workspace; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*4]; + tmp4 = dataptr[DCTSIZE*4] + wsptr[DCTSIZE*3]; + tmp5 = dataptr[DCTSIZE*5] + wsptr[DCTSIZE*2]; + tmp6 = dataptr[DCTSIZE*6] + wsptr[DCTSIZE*1]; + tmp7 = dataptr[DCTSIZE*7] + wsptr[DCTSIZE*0]; + + tmp10 = tmp0 + tmp7; + tmp14 = tmp0 - tmp7; + tmp11 = tmp1 + tmp6; + tmp15 = tmp1 - tmp6; + tmp12 = tmp2 + tmp5; + tmp16 = tmp2 - tmp5; + tmp13 = tmp3 + tmp4; + tmp17 = tmp3 - tmp4; + + tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*4]; + tmp4 = dataptr[DCTSIZE*4] - wsptr[DCTSIZE*3]; + tmp5 = dataptr[DCTSIZE*5] - wsptr[DCTSIZE*2]; + tmp6 = dataptr[DCTSIZE*6] - wsptr[DCTSIZE*1]; + tmp7 = dataptr[DCTSIZE*7] - wsptr[DCTSIZE*0]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(tmp10 + tmp11 + tmp12 + tmp13, PASS1_BITS+1); + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp13, FIX(1.306562965)) + /* c4[16] = c2[8] */ + MULTIPLY(tmp11 - tmp12, FIX_0_541196100), /* c12[16] = c6[8] */ + CONST_BITS+PASS1_BITS+1); + + tmp10 = MULTIPLY(tmp17 - tmp15, FIX(0.275899379)) + /* c14[16] = c7[8] */ + MULTIPLY(tmp14 - tmp16, FIX(1.387039845)); /* c2[16] = c1[8] */ + + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp15, FIX(1.451774982)) /* c6+c14 */ + + MULTIPLY(tmp16, FIX(2.172734804)), /* c2+c10 */ + CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp14, FIX(0.211164243)) /* c2-c6 */ + - MULTIPLY(tmp17, FIX(1.061594338)), /* c10+c14 */ + CONST_BITS+PASS1_BITS+1); + + /* Odd part */ + + tmp11 = MULTIPLY(tmp0 + tmp1, FIX(1.353318001)) + /* c3 */ + MULTIPLY(tmp6 - tmp7, FIX(0.410524528)); /* c13 */ + tmp12 = MULTIPLY(tmp0 + tmp2, FIX(1.247225013)) + /* c5 */ + MULTIPLY(tmp5 + tmp7, FIX(0.666655658)); /* c11 */ + tmp13 = MULTIPLY(tmp0 + tmp3, FIX(1.093201867)) + /* c7 */ + MULTIPLY(tmp4 - tmp7, FIX(0.897167586)); /* c9 */ + tmp14 = MULTIPLY(tmp1 + tmp2, FIX(0.138617169)) + /* c15 */ + MULTIPLY(tmp6 - tmp5, FIX(1.407403738)); /* c1 */ + tmp15 = MULTIPLY(tmp1 + tmp3, - FIX(0.666655658)) + /* -c11 */ + MULTIPLY(tmp4 + tmp6, - FIX(1.247225013)); /* -c5 */ + tmp16 = MULTIPLY(tmp2 + tmp3, - FIX(1.353318001)) + /* -c3 */ + MULTIPLY(tmp5 - tmp4, FIX(0.410524528)); /* c13 */ + tmp10 = tmp11 + tmp12 + tmp13 - + MULTIPLY(tmp0, FIX(2.286341144)) + /* c7+c5+c3-c1 */ + MULTIPLY(tmp7, FIX(0.779653625)); /* c15+c13-c11+c9 */ + tmp11 += tmp14 + tmp15 + MULTIPLY(tmp1, FIX(0.071888074)) /* c9-c3-c15+c11 */ + - MULTIPLY(tmp6, FIX(1.663905119)); /* c7+c13+c1-c5 */ + tmp12 += tmp14 + tmp16 - MULTIPLY(tmp2, FIX(1.125726048)) /* c7+c5+c15-c3 */ + + MULTIPLY(tmp5, FIX(1.227391138)); /* c9-c11+c1-c13 */ + tmp13 += tmp15 + tmp16 + MULTIPLY(tmp3, FIX(1.065388962)) /* c15+c3+c11-c7 */ + + MULTIPLY(tmp4, FIX(2.167985692)); /* c1+c13+c5-c9 */ + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp10, CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp11, CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp12, CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp13, CONST_BITS+PASS1_BITS+1); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 7x14 sample block. + * + * 7-point FDCT in pass 1 (rows), 14-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_7x14 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; + INT32 z1, z2, z3; + DCTELEM workspace[8*6]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * 7-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/14). + */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[6]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[5]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[4]); + tmp3 = GETJSAMPLE(elemptr[3]); + + tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[6]); + tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[5]); + tmp12 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[4]); + + z1 = tmp0 + tmp2; + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((z1 + tmp1 + tmp3 - 7 * CENTERJSAMPLE) << PASS1_BITS); + tmp3 += tmp3; + z1 -= tmp3; + z1 -= tmp3; + z1 = MULTIPLY(z1, FIX(0.353553391)); /* (c2+c6-c4)/2 */ + z2 = MULTIPLY(tmp0 - tmp2, FIX(0.920609002)); /* (c2+c4-c6)/2 */ + z3 = MULTIPLY(tmp1 - tmp2, FIX(0.314692123)); /* c6 */ + dataptr[2] = (DCTELEM) DESCALE(z1 + z2 + z3, CONST_BITS-PASS1_BITS); + z1 -= z2; + z2 = MULTIPLY(tmp0 - tmp1, FIX(0.881747734)); /* c4 */ + dataptr[4] = (DCTELEM) + DESCALE(z2 + z3 - MULTIPLY(tmp1 - tmp3, FIX(0.707106781)), /* c2+c6-c4 */ + CONST_BITS-PASS1_BITS); + dataptr[6] = (DCTELEM) DESCALE(z1 + z2, CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp1 = MULTIPLY(tmp10 + tmp11, FIX(0.935414347)); /* (c3+c1-c5)/2 */ + tmp2 = MULTIPLY(tmp10 - tmp11, FIX(0.170262339)); /* (c3+c5-c1)/2 */ + tmp0 = tmp1 - tmp2; + tmp1 += tmp2; + tmp2 = MULTIPLY(tmp11 + tmp12, - FIX(1.378756276)); /* -c1 */ + tmp1 += tmp2; + tmp3 = MULTIPLY(tmp10 + tmp12, FIX(0.613604268)); /* c5 */ + tmp0 += tmp3; + tmp2 += tmp3 + MULTIPLY(tmp12, FIX(1.870828693)); /* c3+c1-c5 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp0, CONST_BITS-PASS1_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp1, CONST_BITS-PASS1_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp2, CONST_BITS-PASS1_BITS); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 14) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/7)*(8/14) = 32/49, which we + * fold into the constant multipliers: + * 14-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/28) * 32/49. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = 0; ctr < 7; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*5]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*3]; + tmp13 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*2]; + tmp4 = dataptr[DCTSIZE*4] + wsptr[DCTSIZE*1]; + tmp5 = dataptr[DCTSIZE*5] + wsptr[DCTSIZE*0]; + tmp6 = dataptr[DCTSIZE*6] + dataptr[DCTSIZE*7]; + + tmp10 = tmp0 + tmp6; + tmp14 = tmp0 - tmp6; + tmp11 = tmp1 + tmp5; + tmp15 = tmp1 - tmp5; + tmp12 = tmp2 + tmp4; + tmp16 = tmp2 - tmp4; + + tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*5]; + tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*3]; + tmp3 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*2]; + tmp4 = dataptr[DCTSIZE*4] - wsptr[DCTSIZE*1]; + tmp5 = dataptr[DCTSIZE*5] - wsptr[DCTSIZE*0]; + tmp6 = dataptr[DCTSIZE*6] - dataptr[DCTSIZE*7]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp11 + tmp12 + tmp13, + FIX(0.653061224)), /* 32/49 */ + CONST_BITS+PASS1_BITS); + tmp13 += tmp13; + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp13, FIX(0.832106052)) + /* c4 */ + MULTIPLY(tmp11 - tmp13, FIX(0.205513223)) - /* c12 */ + MULTIPLY(tmp12 - tmp13, FIX(0.575835255)), /* c8 */ + CONST_BITS+PASS1_BITS); + + tmp10 = MULTIPLY(tmp14 + tmp15, FIX(0.722074570)); /* c6 */ + + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp14, FIX(0.178337691)) /* c2-c6 */ + + MULTIPLY(tmp16, FIX(0.400721155)), /* c10 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp15, FIX(1.122795725)) /* c6+c10 */ + - MULTIPLY(tmp16, FIX(0.900412262)), /* c2 */ + CONST_BITS+PASS1_BITS); + + /* Odd part */ + + tmp10 = tmp1 + tmp2; + tmp11 = tmp5 - tmp4; + dataptr[DCTSIZE*7] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 - tmp10 + tmp3 - tmp11 - tmp6, + FIX(0.653061224)), /* 32/49 */ + CONST_BITS+PASS1_BITS); + tmp3 = MULTIPLY(tmp3 , FIX(0.653061224)); /* 32/49 */ + tmp10 = MULTIPLY(tmp10, - FIX(0.103406812)); /* -c13 */ + tmp11 = MULTIPLY(tmp11, FIX(0.917760839)); /* c1 */ + tmp10 += tmp11 - tmp3; + tmp11 = MULTIPLY(tmp0 + tmp2, FIX(0.782007410)) + /* c5 */ + MULTIPLY(tmp4 + tmp6, FIX(0.491367823)); /* c9 */ + dataptr[DCTSIZE*5] = (DCTELEM) + DESCALE(tmp10 + tmp11 - MULTIPLY(tmp2, FIX(1.550341076)) /* c3+c5-c13 */ + + MULTIPLY(tmp4, FIX(0.731428202)), /* c1+c11-c9 */ + CONST_BITS+PASS1_BITS); + tmp12 = MULTIPLY(tmp0 + tmp1, FIX(0.871740478)) + /* c3 */ + MULTIPLY(tmp5 - tmp6, FIX(0.305035186)); /* c11 */ + dataptr[DCTSIZE*3] = (DCTELEM) + DESCALE(tmp10 + tmp12 - MULTIPLY(tmp1, FIX(0.276965844)) /* c3-c9-c13 */ + - MULTIPLY(tmp5, FIX(2.004803435)), /* c1+c5+c11 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(tmp11 + tmp12 + tmp3 + - MULTIPLY(tmp0, FIX(0.735987049)) /* c3+c5-c1 */ + - MULTIPLY(tmp6, FIX(0.082925825)), /* c9-c11-c13 */ + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 6x12 sample block. + * + * 6-point FDCT in pass 1 (rows), 12-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_6x12 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; + DCTELEM workspace[8*4]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * 6-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/12). + */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[5]); + tmp11 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[4]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[3]); + + tmp10 = tmp0 + tmp2; + tmp12 = tmp0 - tmp2; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[5]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[4]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[3]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 - 6 * CENTERJSAMPLE) << PASS1_BITS); + dataptr[2] = (DCTELEM) + DESCALE(MULTIPLY(tmp12, FIX(1.224744871)), /* c2 */ + CONST_BITS-PASS1_BITS); + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp11 - tmp11, FIX(0.707106781)), /* c4 */ + CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp10 = DESCALE(MULTIPLY(tmp0 + tmp2, FIX(0.366025404)), /* c5 */ + CONST_BITS-PASS1_BITS); + + dataptr[1] = (DCTELEM) (tmp10 + ((tmp0 + tmp1) << PASS1_BITS)); + dataptr[3] = (DCTELEM) ((tmp0 - tmp1 - tmp2) << PASS1_BITS); + dataptr[5] = (DCTELEM) (tmp10 + ((tmp2 - tmp1) << PASS1_BITS)); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 12) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/6)*(8/12) = 8/9, which we + * fold into the constant multipliers: + * 12-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/24) * 8/9. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = 0; ctr < 6; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*3]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*2]; + tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*1]; + tmp3 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*0]; + tmp4 = dataptr[DCTSIZE*4] + dataptr[DCTSIZE*7]; + tmp5 = dataptr[DCTSIZE*5] + dataptr[DCTSIZE*6]; + + tmp10 = tmp0 + tmp5; + tmp13 = tmp0 - tmp5; + tmp11 = tmp1 + tmp4; + tmp14 = tmp1 - tmp4; + tmp12 = tmp2 + tmp3; + tmp15 = tmp2 - tmp3; + + tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*3]; + tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*2]; + tmp2 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*1]; + tmp3 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*0]; + tmp4 = dataptr[DCTSIZE*4] - dataptr[DCTSIZE*7]; + tmp5 = dataptr[DCTSIZE*5] - dataptr[DCTSIZE*6]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp11 + tmp12, FIX(0.888888889)), /* 8/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(MULTIPLY(tmp13 - tmp14 - tmp15, FIX(0.888888889)), /* 8/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.088662108)), /* c4 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(MULTIPLY(tmp14 - tmp15, FIX(0.888888889)) + /* 8/9 */ + MULTIPLY(tmp13 + tmp15, FIX(1.214244803)), /* c2 */ + CONST_BITS+PASS1_BITS); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp1 + tmp4, FIX(0.481063200)); /* c9 */ + tmp14 = tmp10 + MULTIPLY(tmp1, FIX(0.680326102)); /* c3-c9 */ + tmp15 = tmp10 - MULTIPLY(tmp4, FIX(1.642452502)); /* c3+c9 */ + tmp12 = MULTIPLY(tmp0 + tmp2, FIX(0.997307603)); /* c5 */ + tmp13 = MULTIPLY(tmp0 + tmp3, FIX(0.765261039)); /* c7 */ + tmp10 = tmp12 + tmp13 + tmp14 - MULTIPLY(tmp0, FIX(0.516244403)) /* c5+c7-c1 */ + + MULTIPLY(tmp5, FIX(0.164081699)); /* c11 */ + tmp11 = MULTIPLY(tmp2 + tmp3, - FIX(0.164081699)); /* -c11 */ + tmp12 += tmp11 - tmp15 - MULTIPLY(tmp2, FIX(2.079550144)) /* c1+c5-c11 */ + + MULTIPLY(tmp5, FIX(0.765261039)); /* c7 */ + tmp13 += tmp11 - tmp14 + MULTIPLY(tmp3, FIX(0.645144899)) /* c1+c11-c7 */ + - MULTIPLY(tmp5, FIX(0.997307603)); /* c5 */ + tmp11 = tmp15 + MULTIPLY(tmp0 - tmp3, FIX(1.161389302)) /* c3 */ + - MULTIPLY(tmp2 + tmp5, FIX(0.481063200)); /* c9 */ + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp10, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp11, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp12, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp13, CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 5x10 sample block. + * + * 5-point FDCT in pass 1 (rows), 10-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_5x10 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14; + DCTELEM workspace[8*2]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * 5-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/10). + */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[4]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[3]); + tmp2 = GETJSAMPLE(elemptr[2]); + + tmp10 = tmp0 + tmp1; + tmp11 = tmp0 - tmp1; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[4]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[3]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp2 - 5 * CENTERJSAMPLE) << PASS1_BITS); + tmp11 = MULTIPLY(tmp11, FIX(0.790569415)); /* (c2+c4)/2 */ + tmp10 -= tmp2 << 2; + tmp10 = MULTIPLY(tmp10, FIX(0.353553391)); /* (c2-c4)/2 */ + dataptr[2] = (DCTELEM) DESCALE(tmp11 + tmp10, CONST_BITS-PASS1_BITS); + dataptr[4] = (DCTELEM) DESCALE(tmp11 - tmp10, CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp0 + tmp1, FIX(0.831253876)); /* c3 */ + + dataptr[1] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp0, FIX(0.513743148)), /* c1-c3 */ + CONST_BITS-PASS1_BITS); + dataptr[3] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp1, FIX(2.176250899)), /* c1+c3 */ + CONST_BITS-PASS1_BITS); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 10) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/5)*(8/10) = 32/25, which we + * fold into the constant multipliers: + * 10-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/20) * 32/25. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = 0; ctr < 5; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*1]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*0]; + tmp12 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*7]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*6]; + tmp4 = dataptr[DCTSIZE*4] + dataptr[DCTSIZE*5]; + + tmp10 = tmp0 + tmp4; + tmp13 = tmp0 - tmp4; + tmp11 = tmp1 + tmp3; + tmp14 = tmp1 - tmp3; + + tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*1]; + tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*0]; + tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*7]; + tmp3 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*6]; + tmp4 = dataptr[DCTSIZE*4] - dataptr[DCTSIZE*5]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp11 + tmp12, FIX(1.28)), /* 32/25 */ + CONST_BITS+PASS1_BITS); + tmp12 += tmp12; + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.464477191)) - /* c4 */ + MULTIPLY(tmp11 - tmp12, FIX(0.559380511)), /* c8 */ + CONST_BITS+PASS1_BITS); + tmp10 = MULTIPLY(tmp13 + tmp14, FIX(1.064004961)); /* c6 */ + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp13, FIX(0.657591230)), /* c2-c6 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp14, FIX(2.785601151)), /* c2+c6 */ + CONST_BITS+PASS1_BITS); + + /* Odd part */ + + tmp10 = tmp0 + tmp4; + tmp11 = tmp1 - tmp3; + dataptr[DCTSIZE*5] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp11 - tmp2, FIX(1.28)), /* 32/25 */ + CONST_BITS+PASS1_BITS); + tmp2 = MULTIPLY(tmp2, FIX(1.28)); /* 32/25 */ + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(MULTIPLY(tmp0, FIX(1.787906876)) + /* c1 */ + MULTIPLY(tmp1, FIX(1.612894094)) + tmp2 + /* c3 */ + MULTIPLY(tmp3, FIX(0.821810588)) + /* c7 */ + MULTIPLY(tmp4, FIX(0.283176630)), /* c9 */ + CONST_BITS+PASS1_BITS); + tmp12 = MULTIPLY(tmp0 - tmp4, FIX(1.217352341)) - /* (c3+c7)/2 */ + MULTIPLY(tmp1 + tmp3, FIX(0.752365123)); /* (c1-c9)/2 */ + tmp13 = MULTIPLY(tmp10 + tmp11, FIX(0.395541753)) + /* (c3-c7)/2 */ + MULTIPLY(tmp11, FIX(0.64)) - tmp2; /* 16/25 */ + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp12 + tmp13, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp12 - tmp13, CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 4x8 sample block. + * + * 4-point FDCT in pass 1 (rows), 8-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_4x8 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3; + INT32 tmp10, tmp11, tmp12, tmp13; + INT32 z1; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * We must also scale the output by 8/4 = 2, which we add here. + * 4-point FDCT kernel, + * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point FDCT]. + */ + + dataptr = data; + for (ctr = 0; ctr < DCTSIZE; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[3]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[2]); + + tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[3]); + tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[2]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((tmp0 + tmp1 - 4 * CENTERJSAMPLE) << (PASS1_BITS+1)); + dataptr[2] = (DCTELEM) ((tmp0 - tmp1) << (PASS1_BITS+1)); + + /* Odd part */ + + tmp0 = MULTIPLY(tmp10 + tmp11, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-PASS1_BITS-2); + + dataptr[1] = (DCTELEM) + RIGHT_SHIFT(tmp0 + MULTIPLY(tmp10, FIX_0_765366865), /* c2-c6 */ + CONST_BITS-PASS1_BITS-1); + dataptr[3] = (DCTELEM) + RIGHT_SHIFT(tmp0 - MULTIPLY(tmp11, FIX_1_847759065), /* c2+c6 */ + CONST_BITS-PASS1_BITS-1); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * 8-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/16). + */ + + dataptr = data; + for (ctr = 0; ctr < 4; ctr++) { + /* Even part per LL&M figure 1 --- note that published figure is faulty; + * rotator "c1" should be "c6". + */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; + + /* Add fudge factor here for final descale. */ + tmp10 = tmp0 + tmp3 + (ONE << (PASS1_BITS-1)); + tmp12 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp13 = tmp1 - tmp2; + + tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; + + dataptr[DCTSIZE*0] = (DCTELEM) RIGHT_SHIFT(tmp10 + tmp11, PASS1_BITS); + dataptr[DCTSIZE*4] = (DCTELEM) RIGHT_SHIFT(tmp10 - tmp11, PASS1_BITS); + + z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS+PASS1_BITS-1); + + dataptr[DCTSIZE*2] = (DCTELEM) + RIGHT_SHIFT(z1 + MULTIPLY(tmp12, FIX_0_765366865), /* c2-c6 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*6] = (DCTELEM) + RIGHT_SHIFT(z1 - MULTIPLY(tmp13, FIX_1_847759065), /* c2+c6 */ + CONST_BITS+PASS1_BITS); + + /* Odd part per figure 8 --- note paper omits factor of sqrt(2). + * i0..i3 in the paper are tmp0..tmp3 here. + */ + + tmp12 = tmp0 + tmp2; + tmp13 = tmp1 + tmp3; + + z1 = MULTIPLY(tmp12 + tmp13, FIX_1_175875602); /* c3 */ + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS+PASS1_BITS-1); + + tmp12 = MULTIPLY(tmp12, - FIX_0_390180644); /* -c3+c5 */ + tmp13 = MULTIPLY(tmp13, - FIX_1_961570560); /* -c3-c5 */ + tmp12 += z1; + tmp13 += z1; + + z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* -c3+c7 */ + tmp0 = MULTIPLY(tmp0, FIX_1_501321110); /* c1+c3-c5-c7 */ + tmp3 = MULTIPLY(tmp3, FIX_0_298631336); /* -c1+c3+c5-c7 */ + tmp0 += z1 + tmp12; + tmp3 += z1 + tmp13; + + z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* -c1-c3 */ + tmp1 = MULTIPLY(tmp1, FIX_3_072711026); /* c1+c3+c5-c7 */ + tmp2 = MULTIPLY(tmp2, FIX_2_053119869); /* c1+c3-c5+c7 */ + tmp1 += z1 + tmp13; + tmp2 += z1 + tmp12; + + dataptr[DCTSIZE*1] = (DCTELEM) RIGHT_SHIFT(tmp0, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) RIGHT_SHIFT(tmp1, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*5] = (DCTELEM) RIGHT_SHIFT(tmp2, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*7] = (DCTELEM) RIGHT_SHIFT(tmp3, CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 3x6 sample block. + * + * 3-point FDCT in pass 1 (rows), 6-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_3x6 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2; + INT32 tmp10, tmp11, tmp12; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * We scale the results further by 2 as part of output adaption + * scaling for different DCT size. + * 3-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/6). + */ + + dataptr = data; + for (ctr = 0; ctr < 6; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[2]); + tmp1 = GETJSAMPLE(elemptr[1]); + + tmp2 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[2]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) + ((tmp0 + tmp1 - 3 * CENTERJSAMPLE) << (PASS1_BITS+1)); + dataptr[2] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 - tmp1 - tmp1, FIX(0.707106781)), /* c2 */ + CONST_BITS-PASS1_BITS-1); + + /* Odd part */ + + dataptr[1] = (DCTELEM) + DESCALE(MULTIPLY(tmp2, FIX(1.224744871)), /* c1 */ + CONST_BITS-PASS1_BITS-1); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/6)*(8/3) = 32/9, which we partially + * fold into the constant multipliers (other part was done in pass 1): + * 6-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/12) * 16/9. + */ + + dataptr = data; + for (ctr = 0; ctr < 3; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*5]; + tmp11 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*3]; + + tmp10 = tmp0 + tmp2; + tmp12 = tmp0 - tmp2; + + tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*5]; + tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*3]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp11, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(MULTIPLY(tmp12, FIX(2.177324216)), /* c2 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp11 - tmp11, FIX(1.257078722)), /* c4 */ + CONST_BITS+PASS1_BITS); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp0 + tmp2, FIX(0.650711829)); /* c5 */ + + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp0 + tmp1, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 - tmp1 - tmp2, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*5] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp2 - tmp1, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 2x4 sample block. + * + * 2-point FDCT in pass 1 (rows), 4-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_2x4 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1; + INT32 tmp10, tmp11; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. + * Note results are scaled up by sqrt(8) compared to a true DCT. + * We must also scale the output by (8/2)*(8/4) = 2**3, which we add here. + */ + + dataptr = data; + for (ctr = 0; ctr < 4; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]); + tmp1 = GETJSAMPLE(elemptr[1]); + + /* Apply unsigned->signed conversion. */ + dataptr[0] = (DCTELEM) ((tmp0 + tmp1 - 2 * CENTERJSAMPLE) << 3); + + /* Odd part */ + + dataptr[1] = (DCTELEM) ((tmp0 - tmp1) << 3); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * 4-point FDCT kernel, + * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point FDCT]. + */ + + dataptr = data; + for (ctr = 0; ctr < 2; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*3]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*2]; + + tmp10 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*3]; + tmp11 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*2]; + + dataptr[DCTSIZE*0] = (DCTELEM) (tmp0 + tmp1); + dataptr[DCTSIZE*2] = (DCTELEM) (tmp0 - tmp1); + + /* Odd part */ + + tmp0 = MULTIPLY(tmp10 + tmp11, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-1); + + dataptr[DCTSIZE*1] = (DCTELEM) + RIGHT_SHIFT(tmp0 + MULTIPLY(tmp10, FIX_0_765366865), /* c2-c6 */ + CONST_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) + RIGHT_SHIFT(tmp0 - MULTIPLY(tmp11, FIX_1_847759065), /* c2+c6 */ + CONST_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 1x2 sample block. + * + * 1-point FDCT in pass 1 (rows), 2-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_1x2 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + DCTELEM tmp0, tmp1; + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: empty. */ + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/1)*(8/2) = 2**5. + */ + + /* Even part */ + + tmp0 = GETJSAMPLE(sample_data[0][start_col]); + tmp1 = GETJSAMPLE(sample_data[1][start_col]); + + /* Apply unsigned->signed conversion. */ + data[DCTSIZE*0] = (tmp0 + tmp1 - 2 * CENTERJSAMPLE) << 5; + + /* Odd part */ + + data[DCTSIZE*1] = (tmp0 - tmp1) << 5; +} + +#endif /* DCT_SCALING_SUPPORTED */ +#endif /* DCT_ISLOW_SUPPORTED */ diff --git a/compat/libjpeg/jidctflt.c b/compat/libjpeg/jidctflt.c new file mode 100755 index 0000000..ce2499f --- /dev/null +++ b/compat/libjpeg/jidctflt.c @@ -0,0 +1,238 @@ +/* + * jidctflt.c + * + * Copyright (C) 1994-1998, Thomas G. Lane. + * Modified 2010-2015 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a floating-point implementation of the + * inverse DCT (Discrete Cosine Transform). In the IJG code, this routine + * must also perform dequantization of the input coefficients. + * + * This implementation should be more accurate than either of the integer + * IDCT implementations. However, it may not give the same results on all + * machines because of differences in roundoff behavior. Speed will depend + * on the hardware's floating point capacity. + * + * A 2-D IDCT can be done by 1-D IDCT on each column followed by 1-D IDCT + * on each row (or vice versa, but it's more convenient to emit a row at + * a time). Direct algorithms are also available, but they are much more + * complex and seem not to be any faster when reduced to code. + * + * This implementation is based on Arai, Agui, and Nakajima's algorithm for + * scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in + * Japanese, but the algorithm is described in the Pennebaker & Mitchell + * JPEG textbook (see REFERENCES section in file README). The following code + * is based directly on figure 4-8 in P&M. + * While an 8-point DCT cannot be done in less than 11 multiplies, it is + * possible to arrange the computation so that many of the multiplies are + * simple scalings of the final outputs. These multiplies can then be + * folded into the multiplications or divisions by the JPEG quantization + * table entries. The AA&N method leaves only 5 multiplies and 29 adds + * to be done in the DCT itself. + * The primary disadvantage of this method is that with a fixed-point + * implementation, accuracy is lost due to imprecise representation of the + * scaled quantization values. However, that problem does not arise if + * we use floating point arithmetic. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + +#ifdef DCT_FLOAT_SUPPORTED + + +/* + * This module is specialized to the case DCTSIZE = 8. + */ + +#if DCTSIZE != 8 + Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ +#endif + + +/* Dequantize a coefficient by multiplying it by the multiplier-table + * entry; produce a float result. + */ + +#define DEQUANTIZE(coef,quantval) (((FAST_FLOAT) (coef)) * (quantval)) + + +/* + * Perform dequantization and inverse DCT on one block of coefficients. + * + * cK represents cos(K*pi/16). + */ + +GLOBAL(void) +jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + FAST_FLOAT tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; + FAST_FLOAT tmp10, tmp11, tmp12, tmp13; + FAST_FLOAT z5, z10, z11, z12, z13; + JCOEFPTR inptr; + FLOAT_MULT_TYPE * quantptr; + FAST_FLOAT * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + FAST_FLOAT workspace[DCTSIZE2]; /* buffers data between passes */ + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (FLOAT_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = DCTSIZE; ctr > 0; ctr--) { + /* Due to quantization, we will usually find that many of the input + * coefficients are zero, especially the AC terms. We can exploit this + * by short-circuiting the IDCT calculation for any column in which all + * the AC terms are zero. In that case each output is equal to the + * DC coefficient (with scale factor as needed). + * With typical images and quantization tables, half or more of the + * column DCT calculations can be simplified this way. + */ + + if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 && + inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 && + inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 && + inptr[DCTSIZE*7] == 0) { + /* AC terms all zero */ + FAST_FLOAT dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + + wsptr[DCTSIZE*0] = dcval; + wsptr[DCTSIZE*1] = dcval; + wsptr[DCTSIZE*2] = dcval; + wsptr[DCTSIZE*3] = dcval; + wsptr[DCTSIZE*4] = dcval; + wsptr[DCTSIZE*5] = dcval; + wsptr[DCTSIZE*6] = dcval; + wsptr[DCTSIZE*7] = dcval; + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + continue; + } + + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + tmp3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + tmp10 = tmp0 + tmp2; /* phase 3 */ + tmp11 = tmp0 - tmp2; + + tmp13 = tmp1 + tmp3; /* phases 5-3 */ + tmp12 = (tmp1 - tmp3) * ((FAST_FLOAT) 1.414213562) - tmp13; /* 2*c4 */ + + tmp0 = tmp10 + tmp13; /* phase 2 */ + tmp3 = tmp10 - tmp13; + tmp1 = tmp11 + tmp12; + tmp2 = tmp11 - tmp12; + + /* Odd part */ + + tmp4 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + tmp5 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + tmp6 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + tmp7 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + z13 = tmp6 + tmp5; /* phase 6 */ + z10 = tmp6 - tmp5; + z11 = tmp4 + tmp7; + z12 = tmp4 - tmp7; + + tmp7 = z11 + z13; /* phase 5 */ + tmp11 = (z11 - z13) * ((FAST_FLOAT) 1.414213562); /* 2*c4 */ + + z5 = (z10 + z12) * ((FAST_FLOAT) 1.847759065); /* 2*c2 */ + tmp10 = z5 - z12 * ((FAST_FLOAT) 1.082392200); /* 2*(c2-c6) */ + tmp12 = z5 - z10 * ((FAST_FLOAT) 2.613125930); /* 2*(c2+c6) */ + + tmp6 = tmp12 - tmp7; /* phase 2 */ + tmp5 = tmp11 - tmp6; + tmp4 = tmp10 - tmp5; + + wsptr[DCTSIZE*0] = tmp0 + tmp7; + wsptr[DCTSIZE*7] = tmp0 - tmp7; + wsptr[DCTSIZE*1] = tmp1 + tmp6; + wsptr[DCTSIZE*6] = tmp1 - tmp6; + wsptr[DCTSIZE*2] = tmp2 + tmp5; + wsptr[DCTSIZE*5] = tmp2 - tmp5; + wsptr[DCTSIZE*3] = tmp3 + tmp4; + wsptr[DCTSIZE*4] = tmp3 - tmp4; + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + } + + /* Pass 2: process rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < DCTSIZE; ctr++) { + outptr = output_buf[ctr] + output_col; + /* Rows of zeroes can be exploited in the same way as we did with columns. + * However, the column calculation has created many nonzero AC terms, so + * the simplification applies less often (typically 5% to 10% of the time). + * And testing floats for zero is relatively expensive, so we don't bother. + */ + + /* Even part */ + + /* Prepare range-limit and float->int conversion */ + z5 = wsptr[0] + (((FAST_FLOAT) RANGE_CENTER) + ((FAST_FLOAT) 0.5)); + tmp10 = z5 + wsptr[4]; + tmp11 = z5 - wsptr[4]; + + tmp13 = wsptr[2] + wsptr[6]; + tmp12 = (wsptr[2] - wsptr[6]) * + ((FAST_FLOAT) 1.414213562) - tmp13; /* 2*c4 */ + + tmp0 = tmp10 + tmp13; + tmp3 = tmp10 - tmp13; + tmp1 = tmp11 + tmp12; + tmp2 = tmp11 - tmp12; + + /* Odd part */ + + z13 = wsptr[5] + wsptr[3]; + z10 = wsptr[5] - wsptr[3]; + z11 = wsptr[1] + wsptr[7]; + z12 = wsptr[1] - wsptr[7]; + + tmp7 = z11 + z13; /* phase 5 */ + tmp11 = (z11 - z13) * ((FAST_FLOAT) 1.414213562); /* 2*c4 */ + + z5 = (z10 + z12) * ((FAST_FLOAT) 1.847759065); /* 2*c2 */ + tmp10 = z5 - z12 * ((FAST_FLOAT) 1.082392200); /* 2*(c2-c6) */ + tmp12 = z5 - z10 * ((FAST_FLOAT) 2.613125930); /* 2*(c2+c6) */ + + tmp6 = tmp12 - tmp7; /* phase 2 */ + tmp5 = tmp11 - tmp6; + tmp4 = tmp10 - tmp5; + + /* Final output stage: float->int conversion and range-limit */ + + outptr[0] = range_limit[(int) (tmp0 + tmp7) & RANGE_MASK]; + outptr[7] = range_limit[(int) (tmp0 - tmp7) & RANGE_MASK]; + outptr[1] = range_limit[(int) (tmp1 + tmp6) & RANGE_MASK]; + outptr[6] = range_limit[(int) (tmp1 - tmp6) & RANGE_MASK]; + outptr[2] = range_limit[(int) (tmp2 + tmp5) & RANGE_MASK]; + outptr[5] = range_limit[(int) (tmp2 - tmp5) & RANGE_MASK]; + outptr[3] = range_limit[(int) (tmp3 + tmp4) & RANGE_MASK]; + outptr[4] = range_limit[(int) (tmp3 - tmp4) & RANGE_MASK]; + + wsptr += DCTSIZE; /* advance pointer to next row */ + } +} + +#endif /* DCT_FLOAT_SUPPORTED */ diff --git a/compat/libjpeg/jidctfst.c b/compat/libjpeg/jidctfst.c new file mode 100755 index 0000000..0c197ce --- /dev/null +++ b/compat/libjpeg/jidctfst.c @@ -0,0 +1,351 @@ +/* + * jidctfst.c + * + * Copyright (C) 1994-1998, Thomas G. Lane. + * Modified 2015 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a fast, not so accurate integer implementation of the + * inverse DCT (Discrete Cosine Transform). In the IJG code, this routine + * must also perform dequantization of the input coefficients. + * + * A 2-D IDCT can be done by 1-D IDCT on each column followed by 1-D IDCT + * on each row (or vice versa, but it's more convenient to emit a row at + * a time). Direct algorithms are also available, but they are much more + * complex and seem not to be any faster when reduced to code. + * + * This implementation is based on Arai, Agui, and Nakajima's algorithm for + * scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in + * Japanese, but the algorithm is described in the Pennebaker & Mitchell + * JPEG textbook (see REFERENCES section in file README). The following code + * is based directly on figure 4-8 in P&M. + * While an 8-point DCT cannot be done in less than 11 multiplies, it is + * possible to arrange the computation so that many of the multiplies are + * simple scalings of the final outputs. These multiplies can then be + * folded into the multiplications or divisions by the JPEG quantization + * table entries. The AA&N method leaves only 5 multiplies and 29 adds + * to be done in the DCT itself. + * The primary disadvantage of this method is that with fixed-point math, + * accuracy is lost due to imprecise representation of the scaled + * quantization values. The smaller the quantization table entry, the less + * precise the scaled value, so this implementation does worse with high- + * quality-setting files than with low-quality ones. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + +#ifdef DCT_IFAST_SUPPORTED + + +/* + * This module is specialized to the case DCTSIZE = 8. + */ + +#if DCTSIZE != 8 + Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ +#endif + + +/* Scaling decisions are generally the same as in the LL&M algorithm; + * see jidctint.c for more details. However, we choose to descale + * (right shift) multiplication products as soon as they are formed, + * rather than carrying additional fractional bits into subsequent additions. + * This compromises accuracy slightly, but it lets us save a few shifts. + * More importantly, 16-bit arithmetic is then adequate (for 8-bit samples) + * everywhere except in the multiplications proper; this saves a good deal + * of work on 16-bit-int machines. + * + * The dequantized coefficients are not integers because the AA&N scaling + * factors have been incorporated. We represent them scaled up by PASS1_BITS, + * so that the first and second IDCT rounds have the same input scaling. + * For 8-bit JSAMPLEs, we choose IFAST_SCALE_BITS = PASS1_BITS so as to + * avoid a descaling shift; this compromises accuracy rather drastically + * for small quantization table entries, but it saves a lot of shifts. + * For 12-bit JSAMPLEs, there's no hope of using 16x16 multiplies anyway, + * so we use a much larger scaling factor to preserve accuracy. + * + * A final compromise is to represent the multiplicative constants to only + * 8 fractional bits, rather than 13. This saves some shifting work on some + * machines, and may also reduce the cost of multiplication (since there + * are fewer one-bits in the constants). + */ + +#if BITS_IN_JSAMPLE == 8 +#define CONST_BITS 8 +#define PASS1_BITS 2 +#else +#define CONST_BITS 8 +#define PASS1_BITS 1 /* lose a little precision to avoid overflow */ +#endif + +/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus + * causing a lot of useless floating-point operations at run time. + * To get around this we use the following pre-calculated constants. + * If you change CONST_BITS you may want to add appropriate values. + * (With a reasonable C compiler, you can just rely on the FIX() macro...) + */ + +#if CONST_BITS == 8 +#define FIX_1_082392200 ((INT32) 277) /* FIX(1.082392200) */ +#define FIX_1_414213562 ((INT32) 362) /* FIX(1.414213562) */ +#define FIX_1_847759065 ((INT32) 473) /* FIX(1.847759065) */ +#define FIX_2_613125930 ((INT32) 669) /* FIX(2.613125930) */ +#else +#define FIX_1_082392200 FIX(1.082392200) +#define FIX_1_414213562 FIX(1.414213562) +#define FIX_1_847759065 FIX(1.847759065) +#define FIX_2_613125930 FIX(2.613125930) +#endif + + +/* We can gain a little more speed, with a further compromise in accuracy, + * by omitting the addition in a descaling shift. This yields an incorrectly + * rounded result half the time... + */ + +#ifndef USE_ACCURATE_ROUNDING +#undef DESCALE +#define DESCALE(x,n) RIGHT_SHIFT(x, n) +#endif + + +/* Multiply a DCTELEM variable by an INT32 constant, and immediately + * descale to yield a DCTELEM result. + */ + +#define MULTIPLY(var,const) ((DCTELEM) DESCALE((var) * (const), CONST_BITS)) + + +/* Dequantize a coefficient by multiplying it by the multiplier-table + * entry; produce a DCTELEM result. For 8-bit data a 16x16->16 + * multiplication will do. For 12-bit data, the multiplier table is + * declared INT32, so a 32-bit multiply will be used. + */ + +#if BITS_IN_JSAMPLE == 8 +#define DEQUANTIZE(coef,quantval) (((IFAST_MULT_TYPE) (coef)) * (quantval)) +#else +#define DEQUANTIZE(coef,quantval) \ + DESCALE((coef)*(quantval), IFAST_SCALE_BITS-PASS1_BITS) +#endif + + +/* + * Perform dequantization and inverse DCT on one block of coefficients. + * + * cK represents cos(K*pi/16). + */ + +GLOBAL(void) +jpeg_idct_ifast (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + DCTELEM tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; + DCTELEM tmp10, tmp11, tmp12, tmp13; + DCTELEM z5, z10, z11, z12, z13; + JCOEFPTR inptr; + IFAST_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[DCTSIZE2]; /* buffers data between passes */ + SHIFT_TEMPS /* for DESCALE */ + ISHIFT_TEMPS /* for IRIGHT_SHIFT */ + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (IFAST_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = DCTSIZE; ctr > 0; ctr--) { + /* Due to quantization, we will usually find that many of the input + * coefficients are zero, especially the AC terms. We can exploit this + * by short-circuiting the IDCT calculation for any column in which all + * the AC terms are zero. In that case each output is equal to the + * DC coefficient (with scale factor as needed). + * With typical images and quantization tables, half or more of the + * column DCT calculations can be simplified this way. + */ + + if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 && + inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 && + inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 && + inptr[DCTSIZE*7] == 0) { + /* AC terms all zero */ + int dcval = (int) DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + + wsptr[DCTSIZE*0] = dcval; + wsptr[DCTSIZE*1] = dcval; + wsptr[DCTSIZE*2] = dcval; + wsptr[DCTSIZE*3] = dcval; + wsptr[DCTSIZE*4] = dcval; + wsptr[DCTSIZE*5] = dcval; + wsptr[DCTSIZE*6] = dcval; + wsptr[DCTSIZE*7] = dcval; + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + continue; + } + + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + tmp3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + tmp10 = tmp0 + tmp2; /* phase 3 */ + tmp11 = tmp0 - tmp2; + + tmp13 = tmp1 + tmp3; /* phases 5-3 */ + tmp12 = MULTIPLY(tmp1 - tmp3, FIX_1_414213562) - tmp13; /* 2*c4 */ + + tmp0 = tmp10 + tmp13; /* phase 2 */ + tmp3 = tmp10 - tmp13; + tmp1 = tmp11 + tmp12; + tmp2 = tmp11 - tmp12; + + /* Odd part */ + + tmp4 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + tmp5 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + tmp6 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + tmp7 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + z13 = tmp6 + tmp5; /* phase 6 */ + z10 = tmp6 - tmp5; + z11 = tmp4 + tmp7; + z12 = tmp4 - tmp7; + + tmp7 = z11 + z13; /* phase 5 */ + tmp11 = MULTIPLY(z11 - z13, FIX_1_414213562); /* 2*c4 */ + + z5 = MULTIPLY(z10 + z12, FIX_1_847759065); /* 2*c2 */ + tmp10 = z5 - MULTIPLY(z12, FIX_1_082392200); /* 2*(c2-c6) */ + tmp12 = z5 - MULTIPLY(z10, FIX_2_613125930); /* 2*(c2+c6) */ + + tmp6 = tmp12 - tmp7; /* phase 2 */ + tmp5 = tmp11 - tmp6; + tmp4 = tmp10 - tmp5; + + wsptr[DCTSIZE*0] = (int) (tmp0 + tmp7); + wsptr[DCTSIZE*7] = (int) (tmp0 - tmp7); + wsptr[DCTSIZE*1] = (int) (tmp1 + tmp6); + wsptr[DCTSIZE*6] = (int) (tmp1 - tmp6); + wsptr[DCTSIZE*2] = (int) (tmp2 + tmp5); + wsptr[DCTSIZE*5] = (int) (tmp2 - tmp5); + wsptr[DCTSIZE*3] = (int) (tmp3 + tmp4); + wsptr[DCTSIZE*4] = (int) (tmp3 - tmp4); + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + } + + /* Pass 2: process rows from work array, store into output array. + * Note that we must descale the results by a factor of 8 == 2**3, + * and also undo the PASS1_BITS scaling. + */ + + wsptr = workspace; + for (ctr = 0; ctr < DCTSIZE; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Add range center and fudge factor for final descale and range-limit. */ + z5 = (DCTELEM) wsptr[0] + + ((((DCTELEM) RANGE_CENTER) << (PASS1_BITS+3)) + + (1 << (PASS1_BITS+2))); + + /* Rows of zeroes can be exploited in the same way as we did with columns. + * However, the column calculation has created many nonzero AC terms, so + * the simplification applies less often (typically 5% to 10% of the time). + * On machines with very fast multiplication, it's possible that the + * test takes more time than it's worth. In that case this section + * may be commented out. + */ + +#ifndef NO_ZERO_ROW_TEST + if (wsptr[1] == 0 && wsptr[2] == 0 && wsptr[3] == 0 && wsptr[4] == 0 && + wsptr[5] == 0 && wsptr[6] == 0 && wsptr[7] == 0) { + /* AC terms all zero */ + JSAMPLE dcval = range_limit[(int) IRIGHT_SHIFT(z5, PASS1_BITS+3) + & RANGE_MASK]; + + outptr[0] = dcval; + outptr[1] = dcval; + outptr[2] = dcval; + outptr[3] = dcval; + outptr[4] = dcval; + outptr[5] = dcval; + outptr[6] = dcval; + outptr[7] = dcval; + + wsptr += DCTSIZE; /* advance pointer to next row */ + continue; + } +#endif + + /* Even part */ + + tmp10 = z5 + (DCTELEM) wsptr[4]; + tmp11 = z5 - (DCTELEM) wsptr[4]; + + tmp13 = (DCTELEM) wsptr[2] + (DCTELEM) wsptr[6]; + tmp12 = MULTIPLY((DCTELEM) wsptr[2] - (DCTELEM) wsptr[6], + FIX_1_414213562) - tmp13; /* 2*c4 */ + + tmp0 = tmp10 + tmp13; + tmp3 = tmp10 - tmp13; + tmp1 = tmp11 + tmp12; + tmp2 = tmp11 - tmp12; + + /* Odd part */ + + z13 = (DCTELEM) wsptr[5] + (DCTELEM) wsptr[3]; + z10 = (DCTELEM) wsptr[5] - (DCTELEM) wsptr[3]; + z11 = (DCTELEM) wsptr[1] + (DCTELEM) wsptr[7]; + z12 = (DCTELEM) wsptr[1] - (DCTELEM) wsptr[7]; + + tmp7 = z11 + z13; /* phase 5 */ + tmp11 = MULTIPLY(z11 - z13, FIX_1_414213562); /* 2*c4 */ + + z5 = MULTIPLY(z10 + z12, FIX_1_847759065); /* 2*c2 */ + tmp10 = z5 - MULTIPLY(z12, FIX_1_082392200); /* 2*(c2-c6) */ + tmp12 = z5 - MULTIPLY(z10, FIX_2_613125930); /* 2*(c2+c6) */ + + tmp6 = tmp12 - tmp7; /* phase 2 */ + tmp5 = tmp11 - tmp6; + tmp4 = tmp10 - tmp5; + + /* Final output stage: scale down by a factor of 8 and range-limit */ + + outptr[0] = range_limit[(int) IRIGHT_SHIFT(tmp0 + tmp7, PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) IRIGHT_SHIFT(tmp0 - tmp7, PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) IRIGHT_SHIFT(tmp1 + tmp6, PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) IRIGHT_SHIFT(tmp1 - tmp6, PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) IRIGHT_SHIFT(tmp2 + tmp5, PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) IRIGHT_SHIFT(tmp2 - tmp5, PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) IRIGHT_SHIFT(tmp3 + tmp4, PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) IRIGHT_SHIFT(tmp3 - tmp4, PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += DCTSIZE; /* advance pointer to next row */ + } +} + +#endif /* DCT_IFAST_SUPPORTED */ diff --git a/compat/libjpeg/jidctint.c b/compat/libjpeg/jidctint.c new file mode 100755 index 0000000..2d7ecda --- /dev/null +++ b/compat/libjpeg/jidctint.c @@ -0,0 +1,5239 @@ +/* + * jidctint.c + * + * Copyright (C) 1991-1998, Thomas G. Lane. + * Modification developed 2002-2015 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a slow-but-accurate integer implementation of the + * inverse DCT (Discrete Cosine Transform). In the IJG code, this routine + * must also perform dequantization of the input coefficients. + * + * A 2-D IDCT can be done by 1-D IDCT on each column followed by 1-D IDCT + * on each row (or vice versa, but it's more convenient to emit a row at + * a time). Direct algorithms are also available, but they are much more + * complex and seem not to be any faster when reduced to code. + * + * This implementation is based on an algorithm described in + * C. Loeffler, A. Ligtenberg and G. Moschytz, "Practical Fast 1-D DCT + * Algorithms with 11 Multiplications", Proc. Int'l. Conf. on Acoustics, + * Speech, and Signal Processing 1989 (ICASSP '89), pp. 988-991. + * The primary algorithm described there uses 11 multiplies and 29 adds. + * We use their alternate method with 12 multiplies and 32 adds. + * The advantage of this method is that no data path contains more than one + * multiplication; this allows a very simple and accurate implementation in + * scaled fixed-point arithmetic, with a minimal number of shifts. + * + * We also provide IDCT routines with various output sample block sizes for + * direct resolution reduction or enlargement and for direct resolving the + * common 2x1 and 1x2 subsampling cases without additional resampling: NxN + * (N=1...16), 2NxN, and Nx2N (N=1...8) pixels for one 8x8 input DCT block. + * + * For N<8 we simply take the corresponding low-frequency coefficients of + * the 8x8 input DCT block and apply an NxN point IDCT on the sub-block + * to yield the downscaled outputs. + * This can be seen as direct low-pass downsampling from the DCT domain + * point of view rather than the usual spatial domain point of view, + * yielding significant computational savings and results at least + * as good as common bilinear (averaging) spatial downsampling. + * + * For N>8 we apply a partial NxN IDCT on the 8 input coefficients as + * lower frequencies and higher frequencies assumed to be zero. + * It turns out that the computational effort is similar to the 8x8 IDCT + * regarding the output size. + * Furthermore, the scaling and descaling is the same for all IDCT sizes. + * + * CAUTION: We rely on the FIX() macro except for the N=1,2,4,8 cases + * since there would be too many additional constants to pre-calculate. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + +#ifdef DCT_ISLOW_SUPPORTED + + +/* + * This module is specialized to the case DCTSIZE = 8. + */ + +#if DCTSIZE != 8 + Sorry, this code only copes with 8x8 DCT blocks. /* deliberate syntax err */ +#endif + + +/* + * The poop on this scaling stuff is as follows: + * + * Each 1-D IDCT step produces outputs which are a factor of sqrt(N) + * larger than the true IDCT outputs. The final outputs are therefore + * a factor of N larger than desired; since N=8 this can be cured by + * a simple right shift at the end of the algorithm. The advantage of + * this arrangement is that we save two multiplications per 1-D IDCT, + * because the y0 and y4 inputs need not be divided by sqrt(N). + * + * We have to do addition and subtraction of the integer inputs, which + * is no problem, and multiplication by fractional constants, which is + * a problem to do in integer arithmetic. We multiply all the constants + * by CONST_SCALE and convert them to integer constants (thus retaining + * CONST_BITS bits of precision in the constants). After doing a + * multiplication we have to divide the product by CONST_SCALE, with proper + * rounding, to produce the correct output. This division can be done + * cheaply as a right shift of CONST_BITS bits. We postpone shifting + * as long as possible so that partial sums can be added together with + * full fractional precision. + * + * The outputs of the first pass are scaled up by PASS1_BITS bits so that + * they are represented to better-than-integral precision. These outputs + * require BITS_IN_JSAMPLE + PASS1_BITS + 3 bits; this fits in a 16-bit word + * with the recommended scaling. (To scale up 12-bit sample data further, an + * intermediate INT32 array would be needed.) + * + * To avoid overflow of the 32-bit intermediate results in pass 2, we must + * have BITS_IN_JSAMPLE + CONST_BITS + PASS1_BITS <= 26. Error analysis + * shows that the values given below are the most effective. + */ + +#if BITS_IN_JSAMPLE == 8 +#define CONST_BITS 13 +#define PASS1_BITS 2 +#else +#define CONST_BITS 13 +#define PASS1_BITS 1 /* lose a little precision to avoid overflow */ +#endif + +/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus + * causing a lot of useless floating-point operations at run time. + * To get around this we use the following pre-calculated constants. + * If you change CONST_BITS you may want to add appropriate values. + * (With a reasonable C compiler, you can just rely on the FIX() macro...) + */ + +#if CONST_BITS == 13 +#define FIX_0_298631336 ((INT32) 2446) /* FIX(0.298631336) */ +#define FIX_0_390180644 ((INT32) 3196) /* FIX(0.390180644) */ +#define FIX_0_541196100 ((INT32) 4433) /* FIX(0.541196100) */ +#define FIX_0_765366865 ((INT32) 6270) /* FIX(0.765366865) */ +#define FIX_0_899976223 ((INT32) 7373) /* FIX(0.899976223) */ +#define FIX_1_175875602 ((INT32) 9633) /* FIX(1.175875602) */ +#define FIX_1_501321110 ((INT32) 12299) /* FIX(1.501321110) */ +#define FIX_1_847759065 ((INT32) 15137) /* FIX(1.847759065) */ +#define FIX_1_961570560 ((INT32) 16069) /* FIX(1.961570560) */ +#define FIX_2_053119869 ((INT32) 16819) /* FIX(2.053119869) */ +#define FIX_2_562915447 ((INT32) 20995) /* FIX(2.562915447) */ +#define FIX_3_072711026 ((INT32) 25172) /* FIX(3.072711026) */ +#else +#define FIX_0_298631336 FIX(0.298631336) +#define FIX_0_390180644 FIX(0.390180644) +#define FIX_0_541196100 FIX(0.541196100) +#define FIX_0_765366865 FIX(0.765366865) +#define FIX_0_899976223 FIX(0.899976223) +#define FIX_1_175875602 FIX(1.175875602) +#define FIX_1_501321110 FIX(1.501321110) +#define FIX_1_847759065 FIX(1.847759065) +#define FIX_1_961570560 FIX(1.961570560) +#define FIX_2_053119869 FIX(2.053119869) +#define FIX_2_562915447 FIX(2.562915447) +#define FIX_3_072711026 FIX(3.072711026) +#endif + + +/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result. + * For 8-bit samples with the recommended scaling, all the variable + * and constant values involved are no more than 16 bits wide, so a + * 16x16->32 bit multiply can be used instead of a full 32x32 multiply. + * For 12-bit samples, a full 32-bit multiplication will be needed. + */ + +#if BITS_IN_JSAMPLE == 8 +#define MULTIPLY(var,const) MULTIPLY16C16(var,const) +#else +#define MULTIPLY(var,const) ((var) * (const)) +#endif + + +/* Dequantize a coefficient by multiplying it by the multiplier-table + * entry; produce an int result. In this module, both inputs and result + * are 16 bits or less, so either int or short multiply will work. + */ + +#define DEQUANTIZE(coef,quantval) (((ISLOW_MULT_TYPE) (coef)) * (quantval)) + + +/* + * Perform dequantization and inverse DCT on one block of coefficients. + * + * cK represents sqrt(2) * cos(K*pi/16). + */ + +GLOBAL(void) +jpeg_idct_islow (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3; + INT32 tmp10, tmp11, tmp12, tmp13; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[DCTSIZE2]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * Note results are scaled up by sqrt(8) compared to a true IDCT; + * furthermore, we scale the results by 2**PASS1_BITS. + */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = DCTSIZE; ctr > 0; ctr--) { + /* Due to quantization, we will usually find that many of the input + * coefficients are zero, especially the AC terms. We can exploit this + * by short-circuiting the IDCT calculation for any column in which all + * the AC terms are zero. In that case each output is equal to the + * DC coefficient (with scale factor as needed). + * With typical images and quantization tables, half or more of the + * column DCT calculations can be simplified this way. + */ + + if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 && + inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 && + inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 && + inptr[DCTSIZE*7] == 0) { + /* AC terms all zero */ + int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS; + + wsptr[DCTSIZE*0] = dcval; + wsptr[DCTSIZE*1] = dcval; + wsptr[DCTSIZE*2] = dcval; + wsptr[DCTSIZE*3] = dcval; + wsptr[DCTSIZE*4] = dcval; + wsptr[DCTSIZE*5] = dcval; + wsptr[DCTSIZE*6] = dcval; + wsptr[DCTSIZE*7] = dcval; + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + continue; + } + + /* Even part: reverse the even part of the forward DCT. + * The rotator is c(-6). + */ + + z2 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z3 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z2 <<= CONST_BITS; + z3 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z2 += ONE << (CONST_BITS-PASS1_BITS-1); + + tmp0 = z2 + z3; + tmp1 = z2 - z3; + + z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + tmp2 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */ + tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */ + + tmp10 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + tmp11 = tmp1 + tmp3; + tmp12 = tmp1 - tmp3; + + /* Odd part per figure 8; the matrix is unitary and hence its + * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. + */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + tmp1 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + tmp3 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + + z2 = tmp0 + tmp2; + z3 = tmp1 + tmp3; + + z1 = MULTIPLY(z2 + z3, FIX_1_175875602); /* c3 */ + z2 = MULTIPLY(z2, - FIX_1_961570560); /* -c3-c5 */ + z3 = MULTIPLY(z3, - FIX_0_390180644); /* -c3+c5 */ + z2 += z1; + z3 += z1; + + z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* -c3+c7 */ + tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* -c1+c3+c5-c7 */ + tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* c1+c3-c5-c7 */ + tmp0 += z1 + z2; + tmp3 += z1 + z3; + + z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* -c1-c3 */ + tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* c1+c3-c5+c7 */ + tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* c1+c3+c5-c7 */ + tmp1 += z1 + z3; + tmp2 += z1 + z2; + + /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ + + wsptr[DCTSIZE*0] = (int) RIGHT_SHIFT(tmp10 + tmp3, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*7] = (int) RIGHT_SHIFT(tmp10 - tmp3, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*1] = (int) RIGHT_SHIFT(tmp11 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*6] = (int) RIGHT_SHIFT(tmp11 - tmp2, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*2] = (int) RIGHT_SHIFT(tmp12 + tmp1, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*5] = (int) RIGHT_SHIFT(tmp12 - tmp1, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*3] = (int) RIGHT_SHIFT(tmp13 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*4] = (int) RIGHT_SHIFT(tmp13 - tmp0, CONST_BITS-PASS1_BITS); + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + } + + /* Pass 2: process rows from work array, store into output array. + * Note that we must descale the results by a factor of 8 == 2**3, + * and also undo the PASS1_BITS scaling. + */ + + wsptr = workspace; + for (ctr = 0; ctr < DCTSIZE; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Add range center and fudge factor for final descale and range-limit. */ + z2 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + + /* Rows of zeroes can be exploited in the same way as we did with columns. + * However, the column calculation has created many nonzero AC terms, so + * the simplification applies less often (typically 5% to 10% of the time). + * On machines with very fast multiplication, it's possible that the + * test takes more time than it's worth. In that case this section + * may be commented out. + */ + +#ifndef NO_ZERO_ROW_TEST + if (wsptr[1] == 0 && wsptr[2] == 0 && wsptr[3] == 0 && wsptr[4] == 0 && + wsptr[5] == 0 && wsptr[6] == 0 && wsptr[7] == 0) { + /* AC terms all zero */ + JSAMPLE dcval = range_limit[(int) RIGHT_SHIFT(z2, PASS1_BITS+3) + & RANGE_MASK]; + + outptr[0] = dcval; + outptr[1] = dcval; + outptr[2] = dcval; + outptr[3] = dcval; + outptr[4] = dcval; + outptr[5] = dcval; + outptr[6] = dcval; + outptr[7] = dcval; + + wsptr += DCTSIZE; /* advance pointer to next row */ + continue; + } +#endif + + /* Even part: reverse the even part of the forward DCT. + * The rotator is c(-6). + */ + + z3 = (INT32) wsptr[4]; + + tmp0 = (z2 + z3) << CONST_BITS; + tmp1 = (z2 - z3) << CONST_BITS; + + z2 = (INT32) wsptr[2]; + z3 = (INT32) wsptr[6]; + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + tmp2 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */ + tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */ + + tmp10 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + tmp11 = tmp1 + tmp3; + tmp12 = tmp1 - tmp3; + + /* Odd part per figure 8; the matrix is unitary and hence its + * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. + */ + + tmp0 = (INT32) wsptr[7]; + tmp1 = (INT32) wsptr[5]; + tmp2 = (INT32) wsptr[3]; + tmp3 = (INT32) wsptr[1]; + + z2 = tmp0 + tmp2; + z3 = tmp1 + tmp3; + + z1 = MULTIPLY(z2 + z3, FIX_1_175875602); /* c3 */ + z2 = MULTIPLY(z2, - FIX_1_961570560); /* -c3-c5 */ + z3 = MULTIPLY(z3, - FIX_0_390180644); /* -c3+c5 */ + z2 += z1; + z3 += z1; + + z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* -c3+c7 */ + tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* -c1+c3+c5-c7 */ + tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* c1+c3-c5-c7 */ + tmp0 += z1 + z2; + tmp3 += z1 + z3; + + z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* -c1-c3 */ + tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* c1+c3-c5+c7 */ + tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* c1+c3+c5-c7 */ + tmp1 += z1 + z3; + tmp2 += z1 + z2; + + /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp13 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp13 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += DCTSIZE; /* advance pointer to next row */ + } +} + +#ifdef IDCT_SCALING_SUPPORTED + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 7x7 output block. + * + * Optimized algorithm with 12 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/14). + */ + +GLOBAL(void) +jpeg_idct_7x7 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp10, tmp11, tmp12, tmp13; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[7*7]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 7; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp13 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp13 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp13 += ONE << (CONST_BITS-PASS1_BITS-1); + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + tmp10 = MULTIPLY(z2 - z3, FIX(0.881747734)); /* c4 */ + tmp12 = MULTIPLY(z1 - z2, FIX(0.314692123)); /* c6 */ + tmp11 = tmp10 + tmp12 + tmp13 - MULTIPLY(z2, FIX(1.841218003)); /* c2+c4-c6 */ + tmp0 = z1 + z3; + z2 -= tmp0; + tmp0 = MULTIPLY(tmp0, FIX(1.274162392)) + tmp13; /* c2 */ + tmp10 += tmp0 - MULTIPLY(z3, FIX(0.077722536)); /* c2-c4-c6 */ + tmp12 += tmp0 - MULTIPLY(z1, FIX(2.470602249)); /* c2+c4+c6 */ + tmp13 += MULTIPLY(z2, FIX(1.414213562)); /* c0 */ + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + + tmp1 = MULTIPLY(z1 + z2, FIX(0.935414347)); /* (c3+c1-c5)/2 */ + tmp2 = MULTIPLY(z1 - z2, FIX(0.170262339)); /* (c3+c5-c1)/2 */ + tmp0 = tmp1 - tmp2; + tmp1 += tmp2; + tmp2 = MULTIPLY(z2 + z3, - FIX(1.378756276)); /* -c1 */ + tmp1 += tmp2; + z2 = MULTIPLY(z1 + z3, FIX(0.613604268)); /* c5 */ + tmp0 += z2; + tmp2 += z2 + MULTIPLY(z3, FIX(1.870828693)); /* c3+c1-c5 */ + + /* Final output stage */ + + wsptr[7*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[7*6] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS); + wsptr[7*1] = (int) RIGHT_SHIFT(tmp11 + tmp1, CONST_BITS-PASS1_BITS); + wsptr[7*5] = (int) RIGHT_SHIFT(tmp11 - tmp1, CONST_BITS-PASS1_BITS); + wsptr[7*2] = (int) RIGHT_SHIFT(tmp12 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[7*4] = (int) RIGHT_SHIFT(tmp12 - tmp2, CONST_BITS-PASS1_BITS); + wsptr[7*3] = (int) RIGHT_SHIFT(tmp13, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 7 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 7; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + tmp13 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + tmp13 <<= CONST_BITS; + + z1 = (INT32) wsptr[2]; + z2 = (INT32) wsptr[4]; + z3 = (INT32) wsptr[6]; + + tmp10 = MULTIPLY(z2 - z3, FIX(0.881747734)); /* c4 */ + tmp12 = MULTIPLY(z1 - z2, FIX(0.314692123)); /* c6 */ + tmp11 = tmp10 + tmp12 + tmp13 - MULTIPLY(z2, FIX(1.841218003)); /* c2+c4-c6 */ + tmp0 = z1 + z3; + z2 -= tmp0; + tmp0 = MULTIPLY(tmp0, FIX(1.274162392)) + tmp13; /* c2 */ + tmp10 += tmp0 - MULTIPLY(z3, FIX(0.077722536)); /* c2-c4-c6 */ + tmp12 += tmp0 - MULTIPLY(z1, FIX(2.470602249)); /* c2+c4+c6 */ + tmp13 += MULTIPLY(z2, FIX(1.414213562)); /* c0 */ + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + + tmp1 = MULTIPLY(z1 + z2, FIX(0.935414347)); /* (c3+c1-c5)/2 */ + tmp2 = MULTIPLY(z1 - z2, FIX(0.170262339)); /* (c3+c5-c1)/2 */ + tmp0 = tmp1 - tmp2; + tmp1 += tmp2; + tmp2 = MULTIPLY(z2 + z3, - FIX(1.378756276)); /* -c1 */ + tmp1 += tmp2; + z2 = MULTIPLY(z1 + z3, FIX(0.613604268)); /* c5 */ + tmp0 += z2; + tmp2 += z2 + MULTIPLY(z3, FIX(1.870828693)); /* c3+c1-c5 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 7; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a reduced-size 6x6 output block. + * + * Optimized algorithm with 3 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/12). + */ + +GLOBAL(void) +jpeg_idct_6x6 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp10, tmp11, tmp12; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[6*6]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 6; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp0 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-PASS1_BITS-1); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + tmp10 = MULTIPLY(tmp2, FIX(0.707106781)); /* c4 */ + tmp1 = tmp0 + tmp10; + tmp11 = RIGHT_SHIFT(tmp0 - tmp10 - tmp10, CONST_BITS-PASS1_BITS); + tmp10 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + tmp0 = MULTIPLY(tmp10, FIX(1.224744871)); /* c2 */ + tmp10 = tmp1 + tmp0; + tmp12 = tmp1 - tmp0; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + tmp1 = MULTIPLY(z1 + z3, FIX(0.366025404)); /* c5 */ + tmp0 = tmp1 + ((z1 + z2) << CONST_BITS); + tmp2 = tmp1 + ((z3 - z2) << CONST_BITS); + tmp1 = (z1 - z2 - z3) << PASS1_BITS; + + /* Final output stage */ + + wsptr[6*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[6*5] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS); + wsptr[6*1] = (int) (tmp11 + tmp1); + wsptr[6*4] = (int) (tmp11 - tmp1); + wsptr[6*2] = (int) RIGHT_SHIFT(tmp12 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[6*3] = (int) RIGHT_SHIFT(tmp12 - tmp2, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 6 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 6; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + tmp0 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + tmp0 <<= CONST_BITS; + tmp2 = (INT32) wsptr[4]; + tmp10 = MULTIPLY(tmp2, FIX(0.707106781)); /* c4 */ + tmp1 = tmp0 + tmp10; + tmp11 = tmp0 - tmp10 - tmp10; + tmp10 = (INT32) wsptr[2]; + tmp0 = MULTIPLY(tmp10, FIX(1.224744871)); /* c2 */ + tmp10 = tmp1 + tmp0; + tmp12 = tmp1 - tmp0; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + tmp1 = MULTIPLY(z1 + z3, FIX(0.366025404)); /* c5 */ + tmp0 = tmp1 + ((z1 + z2) << CONST_BITS); + tmp2 = tmp1 + ((z3 - z2) << CONST_BITS); + tmp1 = (z1 - z2 - z3) << CONST_BITS; + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 6; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a reduced-size 5x5 output block. + * + * Optimized algorithm with 5 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/10). + */ + +GLOBAL(void) +jpeg_idct_5x5 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp10, tmp11, tmp12; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[5*5]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 5; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp12 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp12 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp12 += ONE << (CONST_BITS-PASS1_BITS-1); + tmp0 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + tmp1 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z1 = MULTIPLY(tmp0 + tmp1, FIX(0.790569415)); /* (c2+c4)/2 */ + z2 = MULTIPLY(tmp0 - tmp1, FIX(0.353553391)); /* (c2-c4)/2 */ + z3 = tmp12 + z2; + tmp10 = z3 + z1; + tmp11 = z3 - z1; + tmp12 -= z2 << 2; + + /* Odd part */ + + z2 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + + z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c3 */ + tmp0 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c1-c3 */ + tmp1 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c1+c3 */ + + /* Final output stage */ + + wsptr[5*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[5*4] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS); + wsptr[5*1] = (int) RIGHT_SHIFT(tmp11 + tmp1, CONST_BITS-PASS1_BITS); + wsptr[5*3] = (int) RIGHT_SHIFT(tmp11 - tmp1, CONST_BITS-PASS1_BITS); + wsptr[5*2] = (int) RIGHT_SHIFT(tmp12, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 5 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 5; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + tmp12 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + tmp12 <<= CONST_BITS; + tmp0 = (INT32) wsptr[2]; + tmp1 = (INT32) wsptr[4]; + z1 = MULTIPLY(tmp0 + tmp1, FIX(0.790569415)); /* (c2+c4)/2 */ + z2 = MULTIPLY(tmp0 - tmp1, FIX(0.353553391)); /* (c2-c4)/2 */ + z3 = tmp12 + z2; + tmp10 = z3 + z1; + tmp11 = z3 - z1; + tmp12 -= z2 << 2; + + /* Odd part */ + + z2 = (INT32) wsptr[1]; + z3 = (INT32) wsptr[3]; + + z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c3 */ + tmp0 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c1-c3 */ + tmp1 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c1+c3 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 5; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a reduced-size 4x4 output block. + * + * Optimized algorithm with 3 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point IDCT]. + */ + +GLOBAL(void) +jpeg_idct_4x4 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp2, tmp10, tmp12; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[4*4]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 4; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + + tmp10 = (tmp0 + tmp2) << PASS1_BITS; + tmp12 = (tmp0 - tmp2) << PASS1_BITS; + + /* Odd part */ + /* Same rotation as in the even part of the 8x8 LL&M IDCT */ + + z2 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-1); + tmp0 = RIGHT_SHIFT(z1 + MULTIPLY(z2, FIX_0_765366865), /* c2-c6 */ + CONST_BITS-PASS1_BITS); + tmp2 = RIGHT_SHIFT(z1 - MULTIPLY(z3, FIX_1_847759065), /* c2+c6 */ + CONST_BITS-PASS1_BITS); + + /* Final output stage */ + + wsptr[4*0] = (int) (tmp10 + tmp0); + wsptr[4*3] = (int) (tmp10 - tmp0); + wsptr[4*1] = (int) (tmp12 + tmp2); + wsptr[4*2] = (int) (tmp12 - tmp2); + } + + /* Pass 2: process 4 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 4; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + tmp0 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + tmp2 = (INT32) wsptr[2]; + + tmp10 = (tmp0 + tmp2) << CONST_BITS; + tmp12 = (tmp0 - tmp2) << CONST_BITS; + + /* Odd part */ + /* Same rotation as in the even part of the 8x8 LL&M IDCT */ + + z2 = (INT32) wsptr[1]; + z3 = (INT32) wsptr[3]; + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + tmp0 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */ + tmp2 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 4; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a reduced-size 3x3 output block. + * + * Optimized algorithm with 2 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/6). + */ + +GLOBAL(void) +jpeg_idct_3x3 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp2, tmp10, tmp12; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[3*3]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 3; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp0 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-PASS1_BITS-1); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + tmp12 = MULTIPLY(tmp2, FIX(0.707106781)); /* c2 */ + tmp10 = tmp0 + tmp12; + tmp2 = tmp0 - tmp12 - tmp12; + + /* Odd part */ + + tmp12 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + tmp0 = MULTIPLY(tmp12, FIX(1.224744871)); /* c1 */ + + /* Final output stage */ + + wsptr[3*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[3*2] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS); + wsptr[3*1] = (int) RIGHT_SHIFT(tmp2, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 3 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 3; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + tmp0 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + tmp0 <<= CONST_BITS; + tmp2 = (INT32) wsptr[2]; + tmp12 = MULTIPLY(tmp2, FIX(0.707106781)); /* c2 */ + tmp10 = tmp0 + tmp12; + tmp2 = tmp0 - tmp12 - tmp12; + + /* Odd part */ + + tmp12 = (INT32) wsptr[1]; + tmp0 = MULTIPLY(tmp12, FIX(1.224744871)); /* c1 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 3; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a reduced-size 2x2 output block. + * + * Multiplication-less algorithm. + */ + +GLOBAL(void) +jpeg_idct_2x2 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + DCTELEM tmp0, tmp1, tmp2, tmp3, tmp4, tmp5; + ISLOW_MULT_TYPE * quantptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + ISHIFT_TEMPS + + /* Pass 1: process columns from input. */ + + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + + /* Column 0 */ + tmp4 = DEQUANTIZE(coef_block[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp5 = DEQUANTIZE(coef_block[DCTSIZE*1], quantptr[DCTSIZE*1]); + /* Add range center and fudge factor for final descale and range-limit. */ + tmp4 += (((DCTELEM) RANGE_CENTER) << 3) + (1 << 2); + + tmp0 = tmp4 + tmp5; + tmp2 = tmp4 - tmp5; + + /* Column 1 */ + tmp4 = DEQUANTIZE(coef_block[DCTSIZE*0+1], quantptr[DCTSIZE*0+1]); + tmp5 = DEQUANTIZE(coef_block[DCTSIZE*1+1], quantptr[DCTSIZE*1+1]); + + tmp1 = tmp4 + tmp5; + tmp3 = tmp4 - tmp5; + + /* Pass 2: process 2 rows, store into output array. */ + + /* Row 0 */ + outptr = output_buf[0] + output_col; + + outptr[0] = range_limit[(int) IRIGHT_SHIFT(tmp0 + tmp1, 3) & RANGE_MASK]; + outptr[1] = range_limit[(int) IRIGHT_SHIFT(tmp0 - tmp1, 3) & RANGE_MASK]; + + /* Row 1 */ + outptr = output_buf[1] + output_col; + + outptr[0] = range_limit[(int) IRIGHT_SHIFT(tmp2 + tmp3, 3) & RANGE_MASK]; + outptr[1] = range_limit[(int) IRIGHT_SHIFT(tmp2 - tmp3, 3) & RANGE_MASK]; +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a reduced-size 1x1 output block. + * + * We hardly need an inverse DCT routine for this: just take the + * average pixel value, which is one-eighth of the DC coefficient. + */ + +GLOBAL(void) +jpeg_idct_1x1 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + DCTELEM dcval; + ISLOW_MULT_TYPE * quantptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + ISHIFT_TEMPS + + /* 1x1 is trivial: just take the DC coefficient divided by 8. */ + + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + + dcval = DEQUANTIZE(coef_block[0], quantptr[0]); + /* Add range center and fudge factor for descale and range-limit. */ + dcval += (((DCTELEM) RANGE_CENTER) << 3) + (1 << 2); + + output_buf[0][output_col] = + range_limit[(int) IRIGHT_SHIFT(dcval, 3) & RANGE_MASK]; +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 9x9 output block. + * + * Optimized algorithm with 10 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/18). + */ + +GLOBAL(void) +jpeg_idct_9x9 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp10, tmp11, tmp12, tmp13, tmp14; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*9]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp0 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-PASS1_BITS-1); + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + tmp3 = MULTIPLY(z3, FIX(0.707106781)); /* c6 */ + tmp1 = tmp0 + tmp3; + tmp2 = tmp0 - tmp3 - tmp3; + + tmp0 = MULTIPLY(z1 - z2, FIX(0.707106781)); /* c6 */ + tmp11 = tmp2 + tmp0; + tmp14 = tmp2 - tmp0 - tmp0; + + tmp0 = MULTIPLY(z1 + z2, FIX(1.328926049)); /* c2 */ + tmp2 = MULTIPLY(z1, FIX(1.083350441)); /* c4 */ + tmp3 = MULTIPLY(z2, FIX(0.245575608)); /* c8 */ + + tmp10 = tmp1 + tmp0 - tmp3; + tmp12 = tmp1 - tmp0 + tmp2; + tmp13 = tmp1 - tmp2 + tmp3; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + z2 = MULTIPLY(z2, - FIX(1.224744871)); /* -c3 */ + + tmp2 = MULTIPLY(z1 + z3, FIX(0.909038955)); /* c5 */ + tmp3 = MULTIPLY(z1 + z4, FIX(0.483689525)); /* c7 */ + tmp0 = tmp2 + tmp3 - z2; + tmp1 = MULTIPLY(z3 - z4, FIX(1.392728481)); /* c1 */ + tmp2 += z2 - tmp1; + tmp3 += z2 + tmp1; + tmp1 = MULTIPLY(z1 - z3 - z4, FIX(1.224744871)); /* c3 */ + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[8*8] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp11 + tmp1, CONST_BITS-PASS1_BITS); + wsptr[8*7] = (int) RIGHT_SHIFT(tmp11 - tmp1, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp12 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp12 - tmp2, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp13 + tmp3, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp13 - tmp3, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp14, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 9 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 9; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + tmp0 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + tmp0 <<= CONST_BITS; + + z1 = (INT32) wsptr[2]; + z2 = (INT32) wsptr[4]; + z3 = (INT32) wsptr[6]; + + tmp3 = MULTIPLY(z3, FIX(0.707106781)); /* c6 */ + tmp1 = tmp0 + tmp3; + tmp2 = tmp0 - tmp3 - tmp3; + + tmp0 = MULTIPLY(z1 - z2, FIX(0.707106781)); /* c6 */ + tmp11 = tmp2 + tmp0; + tmp14 = tmp2 - tmp0 - tmp0; + + tmp0 = MULTIPLY(z1 + z2, FIX(1.328926049)); /* c2 */ + tmp2 = MULTIPLY(z1, FIX(1.083350441)); /* c4 */ + tmp3 = MULTIPLY(z2, FIX(0.245575608)); /* c8 */ + + tmp10 = tmp1 + tmp0 - tmp3; + tmp12 = tmp1 - tmp0 + tmp2; + tmp13 = tmp1 - tmp2 + tmp3; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z4 = (INT32) wsptr[7]; + + z2 = MULTIPLY(z2, - FIX(1.224744871)); /* -c3 */ + + tmp2 = MULTIPLY(z1 + z3, FIX(0.909038955)); /* c5 */ + tmp3 = MULTIPLY(z1 + z4, FIX(0.483689525)); /* c7 */ + tmp0 = tmp2 + tmp3 - z2; + tmp1 = MULTIPLY(z3 - z4, FIX(1.392728481)); /* c1 */ + tmp2 += z2 - tmp1; + tmp3 += z2 + tmp1; + tmp1 = MULTIPLY(z1 - z3 - z4, FIX(1.224744871)); /* c3 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp13 + tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp13 - tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 10x10 output block. + * + * Optimized algorithm with 12 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/20). + */ + +GLOBAL(void) +jpeg_idct_10x10 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24; + INT32 z1, z2, z3, z4, z5; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*10]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + z3 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z3 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z3 += ONE << (CONST_BITS-PASS1_BITS-1); + z4 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z1 = MULTIPLY(z4, FIX(1.144122806)); /* c4 */ + z2 = MULTIPLY(z4, FIX(0.437016024)); /* c8 */ + tmp10 = z3 + z1; + tmp11 = z3 - z2; + + tmp22 = RIGHT_SHIFT(z3 - ((z1 - z2) << 1), /* c0 = (c4-c8)*2 */ + CONST_BITS-PASS1_BITS); + + z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c6 */ + tmp12 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c2-c6 */ + tmp13 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c2+c6 */ + + tmp20 = tmp10 + tmp12; + tmp24 = tmp10 - tmp12; + tmp21 = tmp11 + tmp13; + tmp23 = tmp11 - tmp13; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + tmp11 = z2 + z4; + tmp13 = z2 - z4; + + tmp12 = MULTIPLY(tmp13, FIX(0.309016994)); /* (c3-c7)/2 */ + z5 = z3 << CONST_BITS; + + z2 = MULTIPLY(tmp11, FIX(0.951056516)); /* (c3+c7)/2 */ + z4 = z5 + tmp12; + + tmp10 = MULTIPLY(z1, FIX(1.396802247)) + z2 + z4; /* c1 */ + tmp14 = MULTIPLY(z1, FIX(0.221231742)) - z2 + z4; /* c9 */ + + z2 = MULTIPLY(tmp11, FIX(0.587785252)); /* (c1-c9)/2 */ + z4 = z5 - tmp12 - (tmp13 << (CONST_BITS - 1)); + + tmp12 = (z1 - tmp13 - z3) << PASS1_BITS; + + tmp11 = MULTIPLY(z1, FIX(1.260073511)) - z2 - z4; /* c3 */ + tmp13 = MULTIPLY(z1, FIX(0.642039522)) - z2 + z4; /* c7 */ + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*9] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*8] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) (tmp22 + tmp12); + wsptr[8*7] = (int) (tmp22 - tmp12); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 10 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 10; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + z3 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + z3 <<= CONST_BITS; + z4 = (INT32) wsptr[4]; + z1 = MULTIPLY(z4, FIX(1.144122806)); /* c4 */ + z2 = MULTIPLY(z4, FIX(0.437016024)); /* c8 */ + tmp10 = z3 + z1; + tmp11 = z3 - z2; + + tmp22 = z3 - ((z1 - z2) << 1); /* c0 = (c4-c8)*2 */ + + z2 = (INT32) wsptr[2]; + z3 = (INT32) wsptr[6]; + + z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c6 */ + tmp12 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c2-c6 */ + tmp13 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c2+c6 */ + + tmp20 = tmp10 + tmp12; + tmp24 = tmp10 - tmp12; + tmp21 = tmp11 + tmp13; + tmp23 = tmp11 - tmp13; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z3 <<= CONST_BITS; + z4 = (INT32) wsptr[7]; + + tmp11 = z2 + z4; + tmp13 = z2 - z4; + + tmp12 = MULTIPLY(tmp13, FIX(0.309016994)); /* (c3-c7)/2 */ + + z2 = MULTIPLY(tmp11, FIX(0.951056516)); /* (c3+c7)/2 */ + z4 = z3 + tmp12; + + tmp10 = MULTIPLY(z1, FIX(1.396802247)) + z2 + z4; /* c1 */ + tmp14 = MULTIPLY(z1, FIX(0.221231742)) - z2 + z4; /* c9 */ + + z2 = MULTIPLY(tmp11, FIX(0.587785252)); /* (c1-c9)/2 */ + z4 = z3 - tmp12 - (tmp13 << (CONST_BITS - 1)); + + tmp12 = ((z1 - tmp13) << CONST_BITS) - z3; + + tmp11 = MULTIPLY(z1, FIX(1.260073511)) - z2 - z4; /* c3 */ + tmp13 = MULTIPLY(z1, FIX(0.642039522)) - z2 + z4; /* c7 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 11x11 output block. + * + * Optimized algorithm with 24 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/22). + */ + +GLOBAL(void) +jpeg_idct_11x11 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*11]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp10 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp10 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp10 += ONE << (CONST_BITS-PASS1_BITS-1); + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + tmp20 = MULTIPLY(z2 - z3, FIX(2.546640132)); /* c2+c4 */ + tmp23 = MULTIPLY(z2 - z1, FIX(0.430815045)); /* c2-c6 */ + z4 = z1 + z3; + tmp24 = MULTIPLY(z4, - FIX(1.155664402)); /* -(c2-c10) */ + z4 -= z2; + tmp25 = tmp10 + MULTIPLY(z4, FIX(1.356927976)); /* c2 */ + tmp21 = tmp20 + tmp23 + tmp25 - + MULTIPLY(z2, FIX(1.821790775)); /* c2+c4+c10-c6 */ + tmp20 += tmp25 + MULTIPLY(z3, FIX(2.115825087)); /* c4+c6 */ + tmp23 += tmp25 - MULTIPLY(z1, FIX(1.513598477)); /* c6+c8 */ + tmp24 += tmp25; + tmp22 = tmp24 - MULTIPLY(z3, FIX(0.788749120)); /* c8+c10 */ + tmp24 += MULTIPLY(z2, FIX(1.944413522)) - /* c2+c8 */ + MULTIPLY(z1, FIX(1.390975730)); /* c4+c10 */ + tmp25 = tmp10 - MULTIPLY(z4, FIX(1.414213562)); /* c0 */ + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + tmp11 = z1 + z2; + tmp14 = MULTIPLY(tmp11 + z3 + z4, FIX(0.398430003)); /* c9 */ + tmp11 = MULTIPLY(tmp11, FIX(0.887983902)); /* c3-c9 */ + tmp12 = MULTIPLY(z1 + z3, FIX(0.670361295)); /* c5-c9 */ + tmp13 = tmp14 + MULTIPLY(z1 + z4, FIX(0.366151574)); /* c7-c9 */ + tmp10 = tmp11 + tmp12 + tmp13 - + MULTIPLY(z1, FIX(0.923107866)); /* c7+c5+c3-c1-2*c9 */ + z1 = tmp14 - MULTIPLY(z2 + z3, FIX(1.163011579)); /* c7+c9 */ + tmp11 += z1 + MULTIPLY(z2, FIX(2.073276588)); /* c1+c7+3*c9-c3 */ + tmp12 += z1 - MULTIPLY(z3, FIX(1.192193623)); /* c3+c5-c7-c9 */ + z1 = MULTIPLY(z2 + z4, - FIX(1.798248910)); /* -(c1+c9) */ + tmp11 += z1; + tmp13 += z1 + MULTIPLY(z4, FIX(2.102458632)); /* c1+c5+c9-c7 */ + tmp14 += MULTIPLY(z2, - FIX(1.467221301)) + /* -(c5+c9) */ + MULTIPLY(z3, FIX(1.001388905)) - /* c1-c9 */ + MULTIPLY(z4, FIX(1.684843907)); /* c3+c9 */ + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*10] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*9] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*8] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*7] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp25, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 11 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 11; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + tmp10 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + tmp10 <<= CONST_BITS; + + z1 = (INT32) wsptr[2]; + z2 = (INT32) wsptr[4]; + z3 = (INT32) wsptr[6]; + + tmp20 = MULTIPLY(z2 - z3, FIX(2.546640132)); /* c2+c4 */ + tmp23 = MULTIPLY(z2 - z1, FIX(0.430815045)); /* c2-c6 */ + z4 = z1 + z3; + tmp24 = MULTIPLY(z4, - FIX(1.155664402)); /* -(c2-c10) */ + z4 -= z2; + tmp25 = tmp10 + MULTIPLY(z4, FIX(1.356927976)); /* c2 */ + tmp21 = tmp20 + tmp23 + tmp25 - + MULTIPLY(z2, FIX(1.821790775)); /* c2+c4+c10-c6 */ + tmp20 += tmp25 + MULTIPLY(z3, FIX(2.115825087)); /* c4+c6 */ + tmp23 += tmp25 - MULTIPLY(z1, FIX(1.513598477)); /* c6+c8 */ + tmp24 += tmp25; + tmp22 = tmp24 - MULTIPLY(z3, FIX(0.788749120)); /* c8+c10 */ + tmp24 += MULTIPLY(z2, FIX(1.944413522)) - /* c2+c8 */ + MULTIPLY(z1, FIX(1.390975730)); /* c4+c10 */ + tmp25 = tmp10 - MULTIPLY(z4, FIX(1.414213562)); /* c0 */ + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z4 = (INT32) wsptr[7]; + + tmp11 = z1 + z2; + tmp14 = MULTIPLY(tmp11 + z3 + z4, FIX(0.398430003)); /* c9 */ + tmp11 = MULTIPLY(tmp11, FIX(0.887983902)); /* c3-c9 */ + tmp12 = MULTIPLY(z1 + z3, FIX(0.670361295)); /* c5-c9 */ + tmp13 = tmp14 + MULTIPLY(z1 + z4, FIX(0.366151574)); /* c7-c9 */ + tmp10 = tmp11 + tmp12 + tmp13 - + MULTIPLY(z1, FIX(0.923107866)); /* c7+c5+c3-c1-2*c9 */ + z1 = tmp14 - MULTIPLY(z2 + z3, FIX(1.163011579)); /* c7+c9 */ + tmp11 += z1 + MULTIPLY(z2, FIX(2.073276588)); /* c1+c7+3*c9-c3 */ + tmp12 += z1 - MULTIPLY(z3, FIX(1.192193623)); /* c3+c5-c7-c9 */ + z1 = MULTIPLY(z2 + z4, - FIX(1.798248910)); /* -(c1+c9) */ + tmp11 += z1; + tmp13 += z1 + MULTIPLY(z4, FIX(2.102458632)); /* c1+c5+c9-c7 */ + tmp14 += MULTIPLY(z2, - FIX(1.467221301)) + /* -(c5+c9) */ + MULTIPLY(z3, FIX(1.001388905)) - /* c1-c9 */ + MULTIPLY(z4, FIX(1.684843907)); /* c3+c9 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 12x12 output block. + * + * Optimized algorithm with 15 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/24). + */ + +GLOBAL(void) +jpeg_idct_12x12 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*12]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + z3 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z3 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z3 += ONE << (CONST_BITS-PASS1_BITS-1); + + z4 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z4 = MULTIPLY(z4, FIX(1.224744871)); /* c4 */ + + tmp10 = z3 + z4; + tmp11 = z3 - z4; + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z4 = MULTIPLY(z1, FIX(1.366025404)); /* c2 */ + z1 <<= CONST_BITS; + z2 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + z2 <<= CONST_BITS; + + tmp12 = z1 - z2; + + tmp21 = z3 + tmp12; + tmp24 = z3 - tmp12; + + tmp12 = z4 + z2; + + tmp20 = tmp10 + tmp12; + tmp25 = tmp10 - tmp12; + + tmp12 = z4 - z1 - z2; + + tmp22 = tmp11 + tmp12; + tmp23 = tmp11 - tmp12; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + tmp11 = MULTIPLY(z2, FIX(1.306562965)); /* c3 */ + tmp14 = MULTIPLY(z2, - FIX_0_541196100); /* -c9 */ + + tmp10 = z1 + z3; + tmp15 = MULTIPLY(tmp10 + z4, FIX(0.860918669)); /* c7 */ + tmp12 = tmp15 + MULTIPLY(tmp10, FIX(0.261052384)); /* c5-c7 */ + tmp10 = tmp12 + tmp11 + MULTIPLY(z1, FIX(0.280143716)); /* c1-c5 */ + tmp13 = MULTIPLY(z3 + z4, - FIX(1.045510580)); /* -(c7+c11) */ + tmp12 += tmp13 + tmp14 - MULTIPLY(z3, FIX(1.478575242)); /* c1+c5-c7-c11 */ + tmp13 += tmp15 - tmp11 + MULTIPLY(z4, FIX(1.586706681)); /* c1+c11 */ + tmp15 += tmp14 - MULTIPLY(z1, FIX(0.676326758)) - /* c7-c11 */ + MULTIPLY(z4, FIX(1.982889723)); /* c5+c7 */ + + z1 -= z4; + z2 -= z3; + z3 = MULTIPLY(z1 + z2, FIX_0_541196100); /* c9 */ + tmp11 = z3 + MULTIPLY(z1, FIX_0_765366865); /* c3-c9 */ + tmp14 = z3 - MULTIPLY(z2, FIX_1_847759065); /* c3+c9 */ + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*11] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*10] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*9] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*8] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*7] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp25 + tmp15, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp25 - tmp15, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 12 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 12; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + z3 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + z3 <<= CONST_BITS; + + z4 = (INT32) wsptr[4]; + z4 = MULTIPLY(z4, FIX(1.224744871)); /* c4 */ + + tmp10 = z3 + z4; + tmp11 = z3 - z4; + + z1 = (INT32) wsptr[2]; + z4 = MULTIPLY(z1, FIX(1.366025404)); /* c2 */ + z1 <<= CONST_BITS; + z2 = (INT32) wsptr[6]; + z2 <<= CONST_BITS; + + tmp12 = z1 - z2; + + tmp21 = z3 + tmp12; + tmp24 = z3 - tmp12; + + tmp12 = z4 + z2; + + tmp20 = tmp10 + tmp12; + tmp25 = tmp10 - tmp12; + + tmp12 = z4 - z1 - z2; + + tmp22 = tmp11 + tmp12; + tmp23 = tmp11 - tmp12; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z4 = (INT32) wsptr[7]; + + tmp11 = MULTIPLY(z2, FIX(1.306562965)); /* c3 */ + tmp14 = MULTIPLY(z2, - FIX_0_541196100); /* -c9 */ + + tmp10 = z1 + z3; + tmp15 = MULTIPLY(tmp10 + z4, FIX(0.860918669)); /* c7 */ + tmp12 = tmp15 + MULTIPLY(tmp10, FIX(0.261052384)); /* c5-c7 */ + tmp10 = tmp12 + tmp11 + MULTIPLY(z1, FIX(0.280143716)); /* c1-c5 */ + tmp13 = MULTIPLY(z3 + z4, - FIX(1.045510580)); /* -(c7+c11) */ + tmp12 += tmp13 + tmp14 - MULTIPLY(z3, FIX(1.478575242)); /* c1+c5-c7-c11 */ + tmp13 += tmp15 - tmp11 + MULTIPLY(z4, FIX(1.586706681)); /* c1+c11 */ + tmp15 += tmp14 - MULTIPLY(z1, FIX(0.676326758)) - /* c7-c11 */ + MULTIPLY(z4, FIX(1.982889723)); /* c5+c7 */ + + z1 -= z4; + z2 -= z3; + z3 = MULTIPLY(z1 + z2, FIX_0_541196100); /* c9 */ + tmp11 = z3 + MULTIPLY(z1, FIX_0_765366865); /* c3-c9 */ + tmp14 = z3 - MULTIPLY(z2, FIX_1_847759065); /* c3+c9 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 13x13 output block. + * + * Optimized algorithm with 29 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/26). + */ + +GLOBAL(void) +jpeg_idct_13x13 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*13]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z1 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-1); + + z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z3 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z4 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + tmp10 = z3 + z4; + tmp11 = z3 - z4; + + tmp12 = MULTIPLY(tmp10, FIX(1.155388986)); /* (c4+c6)/2 */ + tmp13 = MULTIPLY(tmp11, FIX(0.096834934)) + z1; /* (c4-c6)/2 */ + + tmp20 = MULTIPLY(z2, FIX(1.373119086)) + tmp12 + tmp13; /* c2 */ + tmp22 = MULTIPLY(z2, FIX(0.501487041)) - tmp12 + tmp13; /* c10 */ + + tmp12 = MULTIPLY(tmp10, FIX(0.316450131)); /* (c8-c12)/2 */ + tmp13 = MULTIPLY(tmp11, FIX(0.486914739)) + z1; /* (c8+c12)/2 */ + + tmp21 = MULTIPLY(z2, FIX(1.058554052)) - tmp12 + tmp13; /* c6 */ + tmp25 = MULTIPLY(z2, - FIX(1.252223920)) + tmp12 + tmp13; /* c4 */ + + tmp12 = MULTIPLY(tmp10, FIX(0.435816023)); /* (c2-c10)/2 */ + tmp13 = MULTIPLY(tmp11, FIX(0.937303064)) - z1; /* (c2+c10)/2 */ + + tmp23 = MULTIPLY(z2, - FIX(0.170464608)) - tmp12 - tmp13; /* c12 */ + tmp24 = MULTIPLY(z2, - FIX(0.803364869)) + tmp12 - tmp13; /* c8 */ + + tmp26 = MULTIPLY(tmp11 - z2, FIX(1.414213562)) + z1; /* c0 */ + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + tmp11 = MULTIPLY(z1 + z2, FIX(1.322312651)); /* c3 */ + tmp12 = MULTIPLY(z1 + z3, FIX(1.163874945)); /* c5 */ + tmp15 = z1 + z4; + tmp13 = MULTIPLY(tmp15, FIX(0.937797057)); /* c7 */ + tmp10 = tmp11 + tmp12 + tmp13 - + MULTIPLY(z1, FIX(2.020082300)); /* c7+c5+c3-c1 */ + tmp14 = MULTIPLY(z2 + z3, - FIX(0.338443458)); /* -c11 */ + tmp11 += tmp14 + MULTIPLY(z2, FIX(0.837223564)); /* c5+c9+c11-c3 */ + tmp12 += tmp14 - MULTIPLY(z3, FIX(1.572116027)); /* c1+c5-c9-c11 */ + tmp14 = MULTIPLY(z2 + z4, - FIX(1.163874945)); /* -c5 */ + tmp11 += tmp14; + tmp13 += tmp14 + MULTIPLY(z4, FIX(2.205608352)); /* c3+c5+c9-c7 */ + tmp14 = MULTIPLY(z3 + z4, - FIX(0.657217813)); /* -c9 */ + tmp12 += tmp14; + tmp13 += tmp14; + tmp15 = MULTIPLY(tmp15, FIX(0.338443458)); /* c11 */ + tmp14 = tmp15 + MULTIPLY(z1, FIX(0.318774355)) - /* c9-c11 */ + MULTIPLY(z2, FIX(0.466105296)); /* c1-c7 */ + z1 = MULTIPLY(z3 - z2, FIX(0.937797057)); /* c7 */ + tmp14 += z1; + tmp15 += z1 + MULTIPLY(z3, FIX(0.384515595)) - /* c3-c7 */ + MULTIPLY(z4, FIX(1.742345811)); /* c1+c11 */ + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*12] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*11] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*10] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*9] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*8] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp25 + tmp15, CONST_BITS-PASS1_BITS); + wsptr[8*7] = (int) RIGHT_SHIFT(tmp25 - tmp15, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp26, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 13 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 13; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + z1 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + z1 <<= CONST_BITS; + + z2 = (INT32) wsptr[2]; + z3 = (INT32) wsptr[4]; + z4 = (INT32) wsptr[6]; + + tmp10 = z3 + z4; + tmp11 = z3 - z4; + + tmp12 = MULTIPLY(tmp10, FIX(1.155388986)); /* (c4+c6)/2 */ + tmp13 = MULTIPLY(tmp11, FIX(0.096834934)) + z1; /* (c4-c6)/2 */ + + tmp20 = MULTIPLY(z2, FIX(1.373119086)) + tmp12 + tmp13; /* c2 */ + tmp22 = MULTIPLY(z2, FIX(0.501487041)) - tmp12 + tmp13; /* c10 */ + + tmp12 = MULTIPLY(tmp10, FIX(0.316450131)); /* (c8-c12)/2 */ + tmp13 = MULTIPLY(tmp11, FIX(0.486914739)) + z1; /* (c8+c12)/2 */ + + tmp21 = MULTIPLY(z2, FIX(1.058554052)) - tmp12 + tmp13; /* c6 */ + tmp25 = MULTIPLY(z2, - FIX(1.252223920)) + tmp12 + tmp13; /* c4 */ + + tmp12 = MULTIPLY(tmp10, FIX(0.435816023)); /* (c2-c10)/2 */ + tmp13 = MULTIPLY(tmp11, FIX(0.937303064)) - z1; /* (c2+c10)/2 */ + + tmp23 = MULTIPLY(z2, - FIX(0.170464608)) - tmp12 - tmp13; /* c12 */ + tmp24 = MULTIPLY(z2, - FIX(0.803364869)) + tmp12 - tmp13; /* c8 */ + + tmp26 = MULTIPLY(tmp11 - z2, FIX(1.414213562)) + z1; /* c0 */ + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z4 = (INT32) wsptr[7]; + + tmp11 = MULTIPLY(z1 + z2, FIX(1.322312651)); /* c3 */ + tmp12 = MULTIPLY(z1 + z3, FIX(1.163874945)); /* c5 */ + tmp15 = z1 + z4; + tmp13 = MULTIPLY(tmp15, FIX(0.937797057)); /* c7 */ + tmp10 = tmp11 + tmp12 + tmp13 - + MULTIPLY(z1, FIX(2.020082300)); /* c7+c5+c3-c1 */ + tmp14 = MULTIPLY(z2 + z3, - FIX(0.338443458)); /* -c11 */ + tmp11 += tmp14 + MULTIPLY(z2, FIX(0.837223564)); /* c5+c9+c11-c3 */ + tmp12 += tmp14 - MULTIPLY(z3, FIX(1.572116027)); /* c1+c5-c9-c11 */ + tmp14 = MULTIPLY(z2 + z4, - FIX(1.163874945)); /* -c5 */ + tmp11 += tmp14; + tmp13 += tmp14 + MULTIPLY(z4, FIX(2.205608352)); /* c3+c5+c9-c7 */ + tmp14 = MULTIPLY(z3 + z4, - FIX(0.657217813)); /* -c9 */ + tmp12 += tmp14; + tmp13 += tmp14; + tmp15 = MULTIPLY(tmp15, FIX(0.338443458)); /* c11 */ + tmp14 = tmp15 + MULTIPLY(z1, FIX(0.318774355)) - /* c9-c11 */ + MULTIPLY(z2, FIX(0.466105296)); /* c1-c7 */ + z1 = MULTIPLY(z3 - z2, FIX(0.937797057)); /* c7 */ + tmp14 += z1; + tmp15 += z1 + MULTIPLY(z3, FIX(0.384515595)) - /* c3-c7 */ + MULTIPLY(z4, FIX(1.742345811)); /* c1+c11 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[12] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp26, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 14x14 output block. + * + * Optimized algorithm with 20 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/28). + */ + +GLOBAL(void) +jpeg_idct_14x14 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*14]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z1 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-1); + z4 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z2 = MULTIPLY(z4, FIX(1.274162392)); /* c4 */ + z3 = MULTIPLY(z4, FIX(0.314692123)); /* c12 */ + z4 = MULTIPLY(z4, FIX(0.881747734)); /* c8 */ + + tmp10 = z1 + z2; + tmp11 = z1 + z3; + tmp12 = z1 - z4; + + tmp23 = RIGHT_SHIFT(z1 - ((z2 + z3 - z4) << 1), /* c0 = (c4+c12-c8)*2 */ + CONST_BITS-PASS1_BITS); + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z2 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + z3 = MULTIPLY(z1 + z2, FIX(1.105676686)); /* c6 */ + + tmp13 = z3 + MULTIPLY(z1, FIX(0.273079590)); /* c2-c6 */ + tmp14 = z3 - MULTIPLY(z2, FIX(1.719280954)); /* c6+c10 */ + tmp15 = MULTIPLY(z1, FIX(0.613604268)) - /* c10 */ + MULTIPLY(z2, FIX(1.378756276)); /* c2 */ + + tmp20 = tmp10 + tmp13; + tmp26 = tmp10 - tmp13; + tmp21 = tmp11 + tmp14; + tmp25 = tmp11 - tmp14; + tmp22 = tmp12 + tmp15; + tmp24 = tmp12 - tmp15; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + tmp13 = z4 << CONST_BITS; + + tmp14 = z1 + z3; + tmp11 = MULTIPLY(z1 + z2, FIX(1.334852607)); /* c3 */ + tmp12 = MULTIPLY(tmp14, FIX(1.197448846)); /* c5 */ + tmp10 = tmp11 + tmp12 + tmp13 - MULTIPLY(z1, FIX(1.126980169)); /* c3+c5-c1 */ + tmp14 = MULTIPLY(tmp14, FIX(0.752406978)); /* c9 */ + tmp16 = tmp14 - MULTIPLY(z1, FIX(1.061150426)); /* c9+c11-c13 */ + z1 -= z2; + tmp15 = MULTIPLY(z1, FIX(0.467085129)) - tmp13; /* c11 */ + tmp16 += tmp15; + z1 += z4; + z4 = MULTIPLY(z2 + z3, - FIX(0.158341681)) - tmp13; /* -c13 */ + tmp11 += z4 - MULTIPLY(z2, FIX(0.424103948)); /* c3-c9-c13 */ + tmp12 += z4 - MULTIPLY(z3, FIX(2.373959773)); /* c3+c5-c13 */ + z4 = MULTIPLY(z3 - z2, FIX(1.405321284)); /* c1 */ + tmp14 += z4 + tmp13 - MULTIPLY(z3, FIX(1.6906431334)); /* c1+c9-c11 */ + tmp15 += z4 + MULTIPLY(z2, FIX(0.674957567)); /* c1+c11-c5 */ + + tmp13 = (z1 - z3) << PASS1_BITS; + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*13] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*12] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*11] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) (tmp23 + tmp13); + wsptr[8*10] = (int) (tmp23 - tmp13); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*9] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp25 + tmp15, CONST_BITS-PASS1_BITS); + wsptr[8*8] = (int) RIGHT_SHIFT(tmp25 - tmp15, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp26 + tmp16, CONST_BITS-PASS1_BITS); + wsptr[8*7] = (int) RIGHT_SHIFT(tmp26 - tmp16, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 14 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 14; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + z1 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + z1 <<= CONST_BITS; + z4 = (INT32) wsptr[4]; + z2 = MULTIPLY(z4, FIX(1.274162392)); /* c4 */ + z3 = MULTIPLY(z4, FIX(0.314692123)); /* c12 */ + z4 = MULTIPLY(z4, FIX(0.881747734)); /* c8 */ + + tmp10 = z1 + z2; + tmp11 = z1 + z3; + tmp12 = z1 - z4; + + tmp23 = z1 - ((z2 + z3 - z4) << 1); /* c0 = (c4+c12-c8)*2 */ + + z1 = (INT32) wsptr[2]; + z2 = (INT32) wsptr[6]; + + z3 = MULTIPLY(z1 + z2, FIX(1.105676686)); /* c6 */ + + tmp13 = z3 + MULTIPLY(z1, FIX(0.273079590)); /* c2-c6 */ + tmp14 = z3 - MULTIPLY(z2, FIX(1.719280954)); /* c6+c10 */ + tmp15 = MULTIPLY(z1, FIX(0.613604268)) - /* c10 */ + MULTIPLY(z2, FIX(1.378756276)); /* c2 */ + + tmp20 = tmp10 + tmp13; + tmp26 = tmp10 - tmp13; + tmp21 = tmp11 + tmp14; + tmp25 = tmp11 - tmp14; + tmp22 = tmp12 + tmp15; + tmp24 = tmp12 - tmp15; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z4 = (INT32) wsptr[7]; + z4 <<= CONST_BITS; + + tmp14 = z1 + z3; + tmp11 = MULTIPLY(z1 + z2, FIX(1.334852607)); /* c3 */ + tmp12 = MULTIPLY(tmp14, FIX(1.197448846)); /* c5 */ + tmp10 = tmp11 + tmp12 + z4 - MULTIPLY(z1, FIX(1.126980169)); /* c3+c5-c1 */ + tmp14 = MULTIPLY(tmp14, FIX(0.752406978)); /* c9 */ + tmp16 = tmp14 - MULTIPLY(z1, FIX(1.061150426)); /* c9+c11-c13 */ + z1 -= z2; + tmp15 = MULTIPLY(z1, FIX(0.467085129)) - z4; /* c11 */ + tmp16 += tmp15; + tmp13 = MULTIPLY(z2 + z3, - FIX(0.158341681)) - z4; /* -c13 */ + tmp11 += tmp13 - MULTIPLY(z2, FIX(0.424103948)); /* c3-c9-c13 */ + tmp12 += tmp13 - MULTIPLY(z3, FIX(2.373959773)); /* c3+c5-c13 */ + tmp13 = MULTIPLY(z3 - z2, FIX(1.405321284)); /* c1 */ + tmp14 += tmp13 + z4 - MULTIPLY(z3, FIX(1.6906431334)); /* c1+c9-c11 */ + tmp15 += tmp13 + MULTIPLY(z2, FIX(0.674957567)); /* c1+c11-c5 */ + + tmp13 = ((z1 - z3) << CONST_BITS) + z4; + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[13] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[12] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp26 + tmp16, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp26 - tmp16, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 15x15 output block. + * + * Optimized algorithm with 22 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/30). + */ + +GLOBAL(void) +jpeg_idct_15x15 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26, tmp27; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*15]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z1 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-1); + + z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z3 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z4 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + tmp10 = MULTIPLY(z4, FIX(0.437016024)); /* c12 */ + tmp11 = MULTIPLY(z4, FIX(1.144122806)); /* c6 */ + + tmp12 = z1 - tmp10; + tmp13 = z1 + tmp11; + z1 -= (tmp11 - tmp10) << 1; /* c0 = (c6-c12)*2 */ + + z4 = z2 - z3; + z3 += z2; + tmp10 = MULTIPLY(z3, FIX(1.337628990)); /* (c2+c4)/2 */ + tmp11 = MULTIPLY(z4, FIX(0.045680613)); /* (c2-c4)/2 */ + z2 = MULTIPLY(z2, FIX(1.439773946)); /* c4+c14 */ + + tmp20 = tmp13 + tmp10 + tmp11; + tmp23 = tmp12 - tmp10 + tmp11 + z2; + + tmp10 = MULTIPLY(z3, FIX(0.547059574)); /* (c8+c14)/2 */ + tmp11 = MULTIPLY(z4, FIX(0.399234004)); /* (c8-c14)/2 */ + + tmp25 = tmp13 - tmp10 - tmp11; + tmp26 = tmp12 + tmp10 - tmp11 - z2; + + tmp10 = MULTIPLY(z3, FIX(0.790569415)); /* (c6+c12)/2 */ + tmp11 = MULTIPLY(z4, FIX(0.353553391)); /* (c6-c12)/2 */ + + tmp21 = tmp12 + tmp10 + tmp11; + tmp24 = tmp13 - tmp10 + tmp11; + tmp11 += tmp11; + tmp22 = z1 + tmp11; /* c10 = c6-c12 */ + tmp27 = z1 - tmp11 - tmp11; /* c0 = (c6-c12)*2 */ + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z4 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z3 = MULTIPLY(z4, FIX(1.224744871)); /* c5 */ + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + tmp13 = z2 - z4; + tmp15 = MULTIPLY(z1 + tmp13, FIX(0.831253876)); /* c9 */ + tmp11 = tmp15 + MULTIPLY(z1, FIX(0.513743148)); /* c3-c9 */ + tmp14 = tmp15 - MULTIPLY(tmp13, FIX(2.176250899)); /* c3+c9 */ + + tmp13 = MULTIPLY(z2, - FIX(0.831253876)); /* -c9 */ + tmp15 = MULTIPLY(z2, - FIX(1.344997024)); /* -c3 */ + z2 = z1 - z4; + tmp12 = z3 + MULTIPLY(z2, FIX(1.406466353)); /* c1 */ + + tmp10 = tmp12 + MULTIPLY(z4, FIX(2.457431844)) - tmp15; /* c1+c7 */ + tmp16 = tmp12 - MULTIPLY(z1, FIX(1.112434820)) + tmp13; /* c1-c13 */ + tmp12 = MULTIPLY(z2, FIX(1.224744871)) - z3; /* c5 */ + z2 = MULTIPLY(z1 + z4, FIX(0.575212477)); /* c11 */ + tmp13 += z2 + MULTIPLY(z1, FIX(0.475753014)) - z3; /* c7-c11 */ + tmp15 += z2 - MULTIPLY(z4, FIX(0.869244010)) + z3; /* c11+c13 */ + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*14] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*13] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*12] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*11] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*10] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp25 + tmp15, CONST_BITS-PASS1_BITS); + wsptr[8*9] = (int) RIGHT_SHIFT(tmp25 - tmp15, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp26 + tmp16, CONST_BITS-PASS1_BITS); + wsptr[8*8] = (int) RIGHT_SHIFT(tmp26 - tmp16, CONST_BITS-PASS1_BITS); + wsptr[8*7] = (int) RIGHT_SHIFT(tmp27, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 15 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 15; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + z1 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + z1 <<= CONST_BITS; + + z2 = (INT32) wsptr[2]; + z3 = (INT32) wsptr[4]; + z4 = (INT32) wsptr[6]; + + tmp10 = MULTIPLY(z4, FIX(0.437016024)); /* c12 */ + tmp11 = MULTIPLY(z4, FIX(1.144122806)); /* c6 */ + + tmp12 = z1 - tmp10; + tmp13 = z1 + tmp11; + z1 -= (tmp11 - tmp10) << 1; /* c0 = (c6-c12)*2 */ + + z4 = z2 - z3; + z3 += z2; + tmp10 = MULTIPLY(z3, FIX(1.337628990)); /* (c2+c4)/2 */ + tmp11 = MULTIPLY(z4, FIX(0.045680613)); /* (c2-c4)/2 */ + z2 = MULTIPLY(z2, FIX(1.439773946)); /* c4+c14 */ + + tmp20 = tmp13 + tmp10 + tmp11; + tmp23 = tmp12 - tmp10 + tmp11 + z2; + + tmp10 = MULTIPLY(z3, FIX(0.547059574)); /* (c8+c14)/2 */ + tmp11 = MULTIPLY(z4, FIX(0.399234004)); /* (c8-c14)/2 */ + + tmp25 = tmp13 - tmp10 - tmp11; + tmp26 = tmp12 + tmp10 - tmp11 - z2; + + tmp10 = MULTIPLY(z3, FIX(0.790569415)); /* (c6+c12)/2 */ + tmp11 = MULTIPLY(z4, FIX(0.353553391)); /* (c6-c12)/2 */ + + tmp21 = tmp12 + tmp10 + tmp11; + tmp24 = tmp13 - tmp10 + tmp11; + tmp11 += tmp11; + tmp22 = z1 + tmp11; /* c10 = c6-c12 */ + tmp27 = z1 - tmp11 - tmp11; /* c0 = (c6-c12)*2 */ + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z4 = (INT32) wsptr[5]; + z3 = MULTIPLY(z4, FIX(1.224744871)); /* c5 */ + z4 = (INT32) wsptr[7]; + + tmp13 = z2 - z4; + tmp15 = MULTIPLY(z1 + tmp13, FIX(0.831253876)); /* c9 */ + tmp11 = tmp15 + MULTIPLY(z1, FIX(0.513743148)); /* c3-c9 */ + tmp14 = tmp15 - MULTIPLY(tmp13, FIX(2.176250899)); /* c3+c9 */ + + tmp13 = MULTIPLY(z2, - FIX(0.831253876)); /* -c9 */ + tmp15 = MULTIPLY(z2, - FIX(1.344997024)); /* -c3 */ + z2 = z1 - z4; + tmp12 = z3 + MULTIPLY(z2, FIX(1.406466353)); /* c1 */ + + tmp10 = tmp12 + MULTIPLY(z4, FIX(2.457431844)) - tmp15; /* c1+c7 */ + tmp16 = tmp12 - MULTIPLY(z1, FIX(1.112434820)) + tmp13; /* c1-c13 */ + tmp12 = MULTIPLY(z2, FIX(1.224744871)) - z3; /* c5 */ + z2 = MULTIPLY(z1 + z4, FIX(0.575212477)); /* c11 */ + tmp13 += z2 + MULTIPLY(z1, FIX(0.475753014)) - z3; /* c7-c11 */ + tmp15 += z2 - MULTIPLY(z4, FIX(0.869244010)) + z3; /* c11+c13 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[14] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[13] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[12] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp26 + tmp16, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp26 - tmp16, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp27, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 16x16 output block. + * + * Optimized algorithm with 28 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/32). + */ + +GLOBAL(void) +jpeg_idct_16x16 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp10, tmp11, tmp12, tmp13; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26, tmp27; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*16]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp0 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp0 += 1 << (CONST_BITS-PASS1_BITS-1); + + z1 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + tmp1 = MULTIPLY(z1, FIX(1.306562965)); /* c4[16] = c2[8] */ + tmp2 = MULTIPLY(z1, FIX_0_541196100); /* c12[16] = c6[8] */ + + tmp10 = tmp0 + tmp1; + tmp11 = tmp0 - tmp1; + tmp12 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z2 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + z3 = z1 - z2; + z4 = MULTIPLY(z3, FIX(0.275899379)); /* c14[16] = c7[8] */ + z3 = MULTIPLY(z3, FIX(1.387039845)); /* c2[16] = c1[8] */ + + tmp0 = z3 + MULTIPLY(z2, FIX_2_562915447); /* (c6+c2)[16] = (c3+c1)[8] */ + tmp1 = z4 + MULTIPLY(z1, FIX_0_899976223); /* (c6-c14)[16] = (c3-c7)[8] */ + tmp2 = z3 - MULTIPLY(z1, FIX(0.601344887)); /* (c2-c10)[16] = (c1-c5)[8] */ + tmp3 = z4 - MULTIPLY(z2, FIX(0.509795579)); /* (c10-c14)[16] = (c5-c7)[8] */ + + tmp20 = tmp10 + tmp0; + tmp27 = tmp10 - tmp0; + tmp21 = tmp12 + tmp1; + tmp26 = tmp12 - tmp1; + tmp22 = tmp13 + tmp2; + tmp25 = tmp13 - tmp2; + tmp23 = tmp11 + tmp3; + tmp24 = tmp11 - tmp3; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + tmp11 = z1 + z3; + + tmp1 = MULTIPLY(z1 + z2, FIX(1.353318001)); /* c3 */ + tmp2 = MULTIPLY(tmp11, FIX(1.247225013)); /* c5 */ + tmp3 = MULTIPLY(z1 + z4, FIX(1.093201867)); /* c7 */ + tmp10 = MULTIPLY(z1 - z4, FIX(0.897167586)); /* c9 */ + tmp11 = MULTIPLY(tmp11, FIX(0.666655658)); /* c11 */ + tmp12 = MULTIPLY(z1 - z2, FIX(0.410524528)); /* c13 */ + tmp0 = tmp1 + tmp2 + tmp3 - + MULTIPLY(z1, FIX(2.286341144)); /* c7+c5+c3-c1 */ + tmp13 = tmp10 + tmp11 + tmp12 - + MULTIPLY(z1, FIX(1.835730603)); /* c9+c11+c13-c15 */ + z1 = MULTIPLY(z2 + z3, FIX(0.138617169)); /* c15 */ + tmp1 += z1 + MULTIPLY(z2, FIX(0.071888074)); /* c9+c11-c3-c15 */ + tmp2 += z1 - MULTIPLY(z3, FIX(1.125726048)); /* c5+c7+c15-c3 */ + z1 = MULTIPLY(z3 - z2, FIX(1.407403738)); /* c1 */ + tmp11 += z1 - MULTIPLY(z3, FIX(0.766367282)); /* c1+c11-c9-c13 */ + tmp12 += z1 + MULTIPLY(z2, FIX(1.971951411)); /* c1+c5+c13-c7 */ + z2 += z4; + z1 = MULTIPLY(z2, - FIX(0.666655658)); /* -c11 */ + tmp1 += z1; + tmp3 += z1 + MULTIPLY(z4, FIX(1.065388962)); /* c3+c11+c15-c7 */ + z2 = MULTIPLY(z2, - FIX(1.247225013)); /* -c5 */ + tmp10 += z2 + MULTIPLY(z4, FIX(3.141271809)); /* c1+c5+c9-c13 */ + tmp12 += z2; + z2 = MULTIPLY(z3 + z4, - FIX(1.353318001)); /* -c3 */ + tmp2 += z2; + tmp3 += z2; + z2 = MULTIPLY(z4 - z3, FIX(0.410524528)); /* c13 */ + tmp10 += z2; + tmp11 += z2; + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[8*15] = (int) RIGHT_SHIFT(tmp20 - tmp0, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp1, CONST_BITS-PASS1_BITS); + wsptr[8*14] = (int) RIGHT_SHIFT(tmp21 - tmp1, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[8*13] = (int) RIGHT_SHIFT(tmp22 - tmp2, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp23 + tmp3, CONST_BITS-PASS1_BITS); + wsptr[8*12] = (int) RIGHT_SHIFT(tmp23 - tmp3, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*11] = (int) RIGHT_SHIFT(tmp24 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp25 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*10] = (int) RIGHT_SHIFT(tmp25 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp26 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*9] = (int) RIGHT_SHIFT(tmp26 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*7] = (int) RIGHT_SHIFT(tmp27 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*8] = (int) RIGHT_SHIFT(tmp27 - tmp13, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 16 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 16; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + tmp0 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + tmp0 <<= CONST_BITS; + + z1 = (INT32) wsptr[4]; + tmp1 = MULTIPLY(z1, FIX(1.306562965)); /* c4[16] = c2[8] */ + tmp2 = MULTIPLY(z1, FIX_0_541196100); /* c12[16] = c6[8] */ + + tmp10 = tmp0 + tmp1; + tmp11 = tmp0 - tmp1; + tmp12 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + + z1 = (INT32) wsptr[2]; + z2 = (INT32) wsptr[6]; + z3 = z1 - z2; + z4 = MULTIPLY(z3, FIX(0.275899379)); /* c14[16] = c7[8] */ + z3 = MULTIPLY(z3, FIX(1.387039845)); /* c2[16] = c1[8] */ + + tmp0 = z3 + MULTIPLY(z2, FIX_2_562915447); /* (c6+c2)[16] = (c3+c1)[8] */ + tmp1 = z4 + MULTIPLY(z1, FIX_0_899976223); /* (c6-c14)[16] = (c3-c7)[8] */ + tmp2 = z3 - MULTIPLY(z1, FIX(0.601344887)); /* (c2-c10)[16] = (c1-c5)[8] */ + tmp3 = z4 - MULTIPLY(z2, FIX(0.509795579)); /* (c10-c14)[16] = (c5-c7)[8] */ + + tmp20 = tmp10 + tmp0; + tmp27 = tmp10 - tmp0; + tmp21 = tmp12 + tmp1; + tmp26 = tmp12 - tmp1; + tmp22 = tmp13 + tmp2; + tmp25 = tmp13 - tmp2; + tmp23 = tmp11 + tmp3; + tmp24 = tmp11 - tmp3; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z4 = (INT32) wsptr[7]; + + tmp11 = z1 + z3; + + tmp1 = MULTIPLY(z1 + z2, FIX(1.353318001)); /* c3 */ + tmp2 = MULTIPLY(tmp11, FIX(1.247225013)); /* c5 */ + tmp3 = MULTIPLY(z1 + z4, FIX(1.093201867)); /* c7 */ + tmp10 = MULTIPLY(z1 - z4, FIX(0.897167586)); /* c9 */ + tmp11 = MULTIPLY(tmp11, FIX(0.666655658)); /* c11 */ + tmp12 = MULTIPLY(z1 - z2, FIX(0.410524528)); /* c13 */ + tmp0 = tmp1 + tmp2 + tmp3 - + MULTIPLY(z1, FIX(2.286341144)); /* c7+c5+c3-c1 */ + tmp13 = tmp10 + tmp11 + tmp12 - + MULTIPLY(z1, FIX(1.835730603)); /* c9+c11+c13-c15 */ + z1 = MULTIPLY(z2 + z3, FIX(0.138617169)); /* c15 */ + tmp1 += z1 + MULTIPLY(z2, FIX(0.071888074)); /* c9+c11-c3-c15 */ + tmp2 += z1 - MULTIPLY(z3, FIX(1.125726048)); /* c5+c7+c15-c3 */ + z1 = MULTIPLY(z3 - z2, FIX(1.407403738)); /* c1 */ + tmp11 += z1 - MULTIPLY(z3, FIX(0.766367282)); /* c1+c11-c9-c13 */ + tmp12 += z1 + MULTIPLY(z2, FIX(1.971951411)); /* c1+c5+c13-c7 */ + z2 += z4; + z1 = MULTIPLY(z2, - FIX(0.666655658)); /* -c11 */ + tmp1 += z1; + tmp3 += z1 + MULTIPLY(z4, FIX(1.065388962)); /* c3+c11+c15-c7 */ + z2 = MULTIPLY(z2, - FIX(1.247225013)); /* -c5 */ + tmp10 += z2 + MULTIPLY(z4, FIX(3.141271809)); /* c1+c5+c9-c13 */ + tmp12 += z2; + z2 = MULTIPLY(z3 + z4, - FIX(1.353318001)); /* -c3 */ + tmp2 += z2; + tmp3 += z2; + z2 = MULTIPLY(z4 - z3, FIX(0.410524528)); /* c13 */ + tmp10 += z2; + tmp11 += z2; + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[15] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[14] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[13] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[12] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp26 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp26 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp27 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp27 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 16x8 output block. + * + * 8-point IDCT in pass 1 (columns), 16-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_16x8 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp10, tmp11, tmp12, tmp13; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26, tmp27; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*8]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * Note results are scaled up by sqrt(8) compared to a true IDCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * 8-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/16). + */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = DCTSIZE; ctr > 0; ctr--) { + /* Due to quantization, we will usually find that many of the input + * coefficients are zero, especially the AC terms. We can exploit this + * by short-circuiting the IDCT calculation for any column in which all + * the AC terms are zero. In that case each output is equal to the + * DC coefficient (with scale factor as needed). + * With typical images and quantization tables, half or more of the + * column DCT calculations can be simplified this way. + */ + + if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 && + inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 && + inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 && + inptr[DCTSIZE*7] == 0) { + /* AC terms all zero */ + int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS; + + wsptr[DCTSIZE*0] = dcval; + wsptr[DCTSIZE*1] = dcval; + wsptr[DCTSIZE*2] = dcval; + wsptr[DCTSIZE*3] = dcval; + wsptr[DCTSIZE*4] = dcval; + wsptr[DCTSIZE*5] = dcval; + wsptr[DCTSIZE*6] = dcval; + wsptr[DCTSIZE*7] = dcval; + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + continue; + } + + /* Even part: reverse the even part of the forward DCT. + * The rotator is c(-6). + */ + + z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + tmp2 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */ + tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */ + + z2 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z3 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z2 <<= CONST_BITS; + z3 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z2 += ONE << (CONST_BITS-PASS1_BITS-1); + + tmp0 = z2 + z3; + tmp1 = z2 - z3; + + tmp10 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + tmp11 = tmp1 + tmp3; + tmp12 = tmp1 - tmp3; + + /* Odd part per figure 8; the matrix is unitary and hence its + * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. + */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + tmp1 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + tmp3 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + + z2 = tmp0 + tmp2; + z3 = tmp1 + tmp3; + + z1 = MULTIPLY(z2 + z3, FIX_1_175875602); /* c3 */ + z2 = MULTIPLY(z2, - FIX_1_961570560); /* -c3-c5 */ + z3 = MULTIPLY(z3, - FIX_0_390180644); /* -c3+c5 */ + z2 += z1; + z3 += z1; + + z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* -c3+c7 */ + tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* -c1+c3+c5-c7 */ + tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* c1+c3-c5-c7 */ + tmp0 += z1 + z2; + tmp3 += z1 + z3; + + z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* -c1-c3 */ + tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* c1+c3-c5+c7 */ + tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* c1+c3+c5-c7 */ + tmp1 += z1 + z3; + tmp2 += z1 + z2; + + /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ + + wsptr[DCTSIZE*0] = (int) RIGHT_SHIFT(tmp10 + tmp3, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*7] = (int) RIGHT_SHIFT(tmp10 - tmp3, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*1] = (int) RIGHT_SHIFT(tmp11 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*6] = (int) RIGHT_SHIFT(tmp11 - tmp2, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*2] = (int) RIGHT_SHIFT(tmp12 + tmp1, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*5] = (int) RIGHT_SHIFT(tmp12 - tmp1, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*3] = (int) RIGHT_SHIFT(tmp13 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*4] = (int) RIGHT_SHIFT(tmp13 - tmp0, CONST_BITS-PASS1_BITS); + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + } + + /* Pass 2: process 8 rows from work array, store into output array. + * 16-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/32). + */ + + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + tmp0 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + tmp0 <<= CONST_BITS; + + z1 = (INT32) wsptr[4]; + tmp1 = MULTIPLY(z1, FIX(1.306562965)); /* c4[16] = c2[8] */ + tmp2 = MULTIPLY(z1, FIX_0_541196100); /* c12[16] = c6[8] */ + + tmp10 = tmp0 + tmp1; + tmp11 = tmp0 - tmp1; + tmp12 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + + z1 = (INT32) wsptr[2]; + z2 = (INT32) wsptr[6]; + z3 = z1 - z2; + z4 = MULTIPLY(z3, FIX(0.275899379)); /* c14[16] = c7[8] */ + z3 = MULTIPLY(z3, FIX(1.387039845)); /* c2[16] = c1[8] */ + + tmp0 = z3 + MULTIPLY(z2, FIX_2_562915447); /* (c6+c2)[16] = (c3+c1)[8] */ + tmp1 = z4 + MULTIPLY(z1, FIX_0_899976223); /* (c6-c14)[16] = (c3-c7)[8] */ + tmp2 = z3 - MULTIPLY(z1, FIX(0.601344887)); /* (c2-c10)[16] = (c1-c5)[8] */ + tmp3 = z4 - MULTIPLY(z2, FIX(0.509795579)); /* (c10-c14)[16] = (c5-c7)[8] */ + + tmp20 = tmp10 + tmp0; + tmp27 = tmp10 - tmp0; + tmp21 = tmp12 + tmp1; + tmp26 = tmp12 - tmp1; + tmp22 = tmp13 + tmp2; + tmp25 = tmp13 - tmp2; + tmp23 = tmp11 + tmp3; + tmp24 = tmp11 - tmp3; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z4 = (INT32) wsptr[7]; + + tmp11 = z1 + z3; + + tmp1 = MULTIPLY(z1 + z2, FIX(1.353318001)); /* c3 */ + tmp2 = MULTIPLY(tmp11, FIX(1.247225013)); /* c5 */ + tmp3 = MULTIPLY(z1 + z4, FIX(1.093201867)); /* c7 */ + tmp10 = MULTIPLY(z1 - z4, FIX(0.897167586)); /* c9 */ + tmp11 = MULTIPLY(tmp11, FIX(0.666655658)); /* c11 */ + tmp12 = MULTIPLY(z1 - z2, FIX(0.410524528)); /* c13 */ + tmp0 = tmp1 + tmp2 + tmp3 - + MULTIPLY(z1, FIX(2.286341144)); /* c7+c5+c3-c1 */ + tmp13 = tmp10 + tmp11 + tmp12 - + MULTIPLY(z1, FIX(1.835730603)); /* c9+c11+c13-c15 */ + z1 = MULTIPLY(z2 + z3, FIX(0.138617169)); /* c15 */ + tmp1 += z1 + MULTIPLY(z2, FIX(0.071888074)); /* c9+c11-c3-c15 */ + tmp2 += z1 - MULTIPLY(z3, FIX(1.125726048)); /* c5+c7+c15-c3 */ + z1 = MULTIPLY(z3 - z2, FIX(1.407403738)); /* c1 */ + tmp11 += z1 - MULTIPLY(z3, FIX(0.766367282)); /* c1+c11-c9-c13 */ + tmp12 += z1 + MULTIPLY(z2, FIX(1.971951411)); /* c1+c5+c13-c7 */ + z2 += z4; + z1 = MULTIPLY(z2, - FIX(0.666655658)); /* -c11 */ + tmp1 += z1; + tmp3 += z1 + MULTIPLY(z4, FIX(1.065388962)); /* c3+c11+c15-c7 */ + z2 = MULTIPLY(z2, - FIX(1.247225013)); /* -c5 */ + tmp10 += z2 + MULTIPLY(z4, FIX(3.141271809)); /* c1+c5+c9-c13 */ + tmp12 += z2; + z2 = MULTIPLY(z3 + z4, - FIX(1.353318001)); /* -c3 */ + tmp2 += z2; + tmp3 += z2; + z2 = MULTIPLY(z4 - z3, FIX(0.410524528)); /* c13 */ + tmp10 += z2; + tmp11 += z2; + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[15] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[14] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[13] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[12] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp26 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp26 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp27 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp27 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 14x7 output block. + * + * 7-point IDCT in pass 1 (columns), 14-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_14x7 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*7]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 7-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/14). + */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp23 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp23 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp23 += ONE << (CONST_BITS-PASS1_BITS-1); + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + tmp20 = MULTIPLY(z2 - z3, FIX(0.881747734)); /* c4 */ + tmp22 = MULTIPLY(z1 - z2, FIX(0.314692123)); /* c6 */ + tmp21 = tmp20 + tmp22 + tmp23 - MULTIPLY(z2, FIX(1.841218003)); /* c2+c4-c6 */ + tmp10 = z1 + z3; + z2 -= tmp10; + tmp10 = MULTIPLY(tmp10, FIX(1.274162392)) + tmp23; /* c2 */ + tmp20 += tmp10 - MULTIPLY(z3, FIX(0.077722536)); /* c2-c4-c6 */ + tmp22 += tmp10 - MULTIPLY(z1, FIX(2.470602249)); /* c2+c4+c6 */ + tmp23 += MULTIPLY(z2, FIX(1.414213562)); /* c0 */ + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + + tmp11 = MULTIPLY(z1 + z2, FIX(0.935414347)); /* (c3+c1-c5)/2 */ + tmp12 = MULTIPLY(z1 - z2, FIX(0.170262339)); /* (c3+c5-c1)/2 */ + tmp10 = tmp11 - tmp12; + tmp11 += tmp12; + tmp12 = MULTIPLY(z2 + z3, - FIX(1.378756276)); /* -c1 */ + tmp11 += tmp12; + z2 = MULTIPLY(z1 + z3, FIX(0.613604268)); /* c5 */ + tmp10 += z2; + tmp12 += z2 + MULTIPLY(z3, FIX(1.870828693)); /* c3+c1-c5 */ + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp23, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 7 rows from work array, store into output array. + * 14-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/28). + */ + + wsptr = workspace; + for (ctr = 0; ctr < 7; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + z1 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + z1 <<= CONST_BITS; + z4 = (INT32) wsptr[4]; + z2 = MULTIPLY(z4, FIX(1.274162392)); /* c4 */ + z3 = MULTIPLY(z4, FIX(0.314692123)); /* c12 */ + z4 = MULTIPLY(z4, FIX(0.881747734)); /* c8 */ + + tmp10 = z1 + z2; + tmp11 = z1 + z3; + tmp12 = z1 - z4; + + tmp23 = z1 - ((z2 + z3 - z4) << 1); /* c0 = (c4+c12-c8)*2 */ + + z1 = (INT32) wsptr[2]; + z2 = (INT32) wsptr[6]; + + z3 = MULTIPLY(z1 + z2, FIX(1.105676686)); /* c6 */ + + tmp13 = z3 + MULTIPLY(z1, FIX(0.273079590)); /* c2-c6 */ + tmp14 = z3 - MULTIPLY(z2, FIX(1.719280954)); /* c6+c10 */ + tmp15 = MULTIPLY(z1, FIX(0.613604268)) - /* c10 */ + MULTIPLY(z2, FIX(1.378756276)); /* c2 */ + + tmp20 = tmp10 + tmp13; + tmp26 = tmp10 - tmp13; + tmp21 = tmp11 + tmp14; + tmp25 = tmp11 - tmp14; + tmp22 = tmp12 + tmp15; + tmp24 = tmp12 - tmp15; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z4 = (INT32) wsptr[7]; + z4 <<= CONST_BITS; + + tmp14 = z1 + z3; + tmp11 = MULTIPLY(z1 + z2, FIX(1.334852607)); /* c3 */ + tmp12 = MULTIPLY(tmp14, FIX(1.197448846)); /* c5 */ + tmp10 = tmp11 + tmp12 + z4 - MULTIPLY(z1, FIX(1.126980169)); /* c3+c5-c1 */ + tmp14 = MULTIPLY(tmp14, FIX(0.752406978)); /* c9 */ + tmp16 = tmp14 - MULTIPLY(z1, FIX(1.061150426)); /* c9+c11-c13 */ + z1 -= z2; + tmp15 = MULTIPLY(z1, FIX(0.467085129)) - z4; /* c11 */ + tmp16 += tmp15; + tmp13 = MULTIPLY(z2 + z3, - FIX(0.158341681)) - z4; /* -c13 */ + tmp11 += tmp13 - MULTIPLY(z2, FIX(0.424103948)); /* c3-c9-c13 */ + tmp12 += tmp13 - MULTIPLY(z3, FIX(2.373959773)); /* c3+c5-c13 */ + tmp13 = MULTIPLY(z3 - z2, FIX(1.405321284)); /* c1 */ + tmp14 += tmp13 + z4 - MULTIPLY(z3, FIX(1.6906431334)); /* c1+c9-c11 */ + tmp15 += tmp13 + MULTIPLY(z2, FIX(0.674957567)); /* c1+c11-c5 */ + + tmp13 = ((z1 - z3) << CONST_BITS) + z4; + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[13] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[12] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp26 + tmp16, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp26 - tmp16, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 12x6 output block. + * + * 6-point IDCT in pass 1 (columns), 12-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_12x6 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*6]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 6-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/12). + */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp10 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp10 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp10 += ONE << (CONST_BITS-PASS1_BITS-1); + tmp12 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + tmp20 = MULTIPLY(tmp12, FIX(0.707106781)); /* c4 */ + tmp11 = tmp10 + tmp20; + tmp21 = RIGHT_SHIFT(tmp10 - tmp20 - tmp20, CONST_BITS-PASS1_BITS); + tmp20 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + tmp10 = MULTIPLY(tmp20, FIX(1.224744871)); /* c2 */ + tmp20 = tmp11 + tmp10; + tmp22 = tmp11 - tmp10; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + tmp11 = MULTIPLY(z1 + z3, FIX(0.366025404)); /* c5 */ + tmp10 = tmp11 + ((z1 + z2) << CONST_BITS); + tmp12 = tmp11 + ((z3 - z2) << CONST_BITS); + tmp11 = (z1 - z2 - z3) << PASS1_BITS; + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) (tmp21 + tmp11); + wsptr[8*4] = (int) (tmp21 - tmp11); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 6 rows from work array, store into output array. + * 12-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/24). + */ + + wsptr = workspace; + for (ctr = 0; ctr < 6; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + z3 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + z3 <<= CONST_BITS; + + z4 = (INT32) wsptr[4]; + z4 = MULTIPLY(z4, FIX(1.224744871)); /* c4 */ + + tmp10 = z3 + z4; + tmp11 = z3 - z4; + + z1 = (INT32) wsptr[2]; + z4 = MULTIPLY(z1, FIX(1.366025404)); /* c2 */ + z1 <<= CONST_BITS; + z2 = (INT32) wsptr[6]; + z2 <<= CONST_BITS; + + tmp12 = z1 - z2; + + tmp21 = z3 + tmp12; + tmp24 = z3 - tmp12; + + tmp12 = z4 + z2; + + tmp20 = tmp10 + tmp12; + tmp25 = tmp10 - tmp12; + + tmp12 = z4 - z1 - z2; + + tmp22 = tmp11 + tmp12; + tmp23 = tmp11 - tmp12; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z4 = (INT32) wsptr[7]; + + tmp11 = MULTIPLY(z2, FIX(1.306562965)); /* c3 */ + tmp14 = MULTIPLY(z2, - FIX_0_541196100); /* -c9 */ + + tmp10 = z1 + z3; + tmp15 = MULTIPLY(tmp10 + z4, FIX(0.860918669)); /* c7 */ + tmp12 = tmp15 + MULTIPLY(tmp10, FIX(0.261052384)); /* c5-c7 */ + tmp10 = tmp12 + tmp11 + MULTIPLY(z1, FIX(0.280143716)); /* c1-c5 */ + tmp13 = MULTIPLY(z3 + z4, - FIX(1.045510580)); /* -(c7+c11) */ + tmp12 += tmp13 + tmp14 - MULTIPLY(z3, FIX(1.478575242)); /* c1+c5-c7-c11 */ + tmp13 += tmp15 - tmp11 + MULTIPLY(z4, FIX(1.586706681)); /* c1+c11 */ + tmp15 += tmp14 - MULTIPLY(z1, FIX(0.676326758)) - /* c7-c11 */ + MULTIPLY(z4, FIX(1.982889723)); /* c5+c7 */ + + z1 -= z4; + z2 -= z3; + z3 = MULTIPLY(z1 + z2, FIX_0_541196100); /* c9 */ + tmp11 = z3 + MULTIPLY(z1, FIX_0_765366865); /* c3-c9 */ + tmp14 = z3 - MULTIPLY(z2, FIX_1_847759065); /* c3+c9 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 10x5 output block. + * + * 5-point IDCT in pass 1 (columns), 10-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_10x5 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*5]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 5-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/10). + */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp12 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp12 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp12 += ONE << (CONST_BITS-PASS1_BITS-1); + tmp13 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + tmp14 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z1 = MULTIPLY(tmp13 + tmp14, FIX(0.790569415)); /* (c2+c4)/2 */ + z2 = MULTIPLY(tmp13 - tmp14, FIX(0.353553391)); /* (c2-c4)/2 */ + z3 = tmp12 + z2; + tmp10 = z3 + z1; + tmp11 = z3 - z1; + tmp12 -= z2 << 2; + + /* Odd part */ + + z2 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + + z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c3 */ + tmp13 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c1-c3 */ + tmp14 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c1+c3 */ + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp10 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp10 - tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp11 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp11 - tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp12, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 5 rows from work array, store into output array. + * 10-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/20). + */ + + wsptr = workspace; + for (ctr = 0; ctr < 5; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + z3 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + z3 <<= CONST_BITS; + z4 = (INT32) wsptr[4]; + z1 = MULTIPLY(z4, FIX(1.144122806)); /* c4 */ + z2 = MULTIPLY(z4, FIX(0.437016024)); /* c8 */ + tmp10 = z3 + z1; + tmp11 = z3 - z2; + + tmp22 = z3 - ((z1 - z2) << 1); /* c0 = (c4-c8)*2 */ + + z2 = (INT32) wsptr[2]; + z3 = (INT32) wsptr[6]; + + z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c6 */ + tmp12 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c2-c6 */ + tmp13 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c2+c6 */ + + tmp20 = tmp10 + tmp12; + tmp24 = tmp10 - tmp12; + tmp21 = tmp11 + tmp13; + tmp23 = tmp11 - tmp13; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z3 <<= CONST_BITS; + z4 = (INT32) wsptr[7]; + + tmp11 = z2 + z4; + tmp13 = z2 - z4; + + tmp12 = MULTIPLY(tmp13, FIX(0.309016994)); /* (c3-c7)/2 */ + + z2 = MULTIPLY(tmp11, FIX(0.951056516)); /* (c3+c7)/2 */ + z4 = z3 + tmp12; + + tmp10 = MULTIPLY(z1, FIX(1.396802247)) + z2 + z4; /* c1 */ + tmp14 = MULTIPLY(z1, FIX(0.221231742)) - z2 + z4; /* c9 */ + + z2 = MULTIPLY(tmp11, FIX(0.587785252)); /* (c1-c9)/2 */ + z4 = z3 - tmp12 - (tmp13 << (CONST_BITS - 1)); + + tmp12 = ((z1 - tmp13) << CONST_BITS) - z3; + + tmp11 = MULTIPLY(z1, FIX(1.260073511)) - z2 - z4; /* c3 */ + tmp13 = MULTIPLY(z1, FIX(0.642039522)) - z2 + z4; /* c7 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 8x4 output block. + * + * 4-point IDCT in pass 1 (columns), 8-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_8x4 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3; + INT32 tmp10, tmp11, tmp12, tmp13; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*4]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 4-point IDCT kernel, + * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point IDCT]. + */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + + tmp10 = (tmp0 + tmp2) << PASS1_BITS; + tmp12 = (tmp0 - tmp2) << PASS1_BITS; + + /* Odd part */ + /* Same rotation as in the even part of the 8x8 LL&M IDCT */ + + z2 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-1); + tmp0 = RIGHT_SHIFT(z1 + MULTIPLY(z2, FIX_0_765366865), /* c2-c6 */ + CONST_BITS-PASS1_BITS); + tmp2 = RIGHT_SHIFT(z1 - MULTIPLY(z3, FIX_1_847759065), /* c2+c6 */ + CONST_BITS-PASS1_BITS); + + /* Final output stage */ + + wsptr[8*0] = (int) (tmp10 + tmp0); + wsptr[8*3] = (int) (tmp10 - tmp0); + wsptr[8*1] = (int) (tmp12 + tmp2); + wsptr[8*2] = (int) (tmp12 - tmp2); + } + + /* Pass 2: process rows from work array, store into output array. + * Note that we must descale the results by a factor of 8 == 2**3, + * and also undo the PASS1_BITS scaling. + * 8-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/16). + */ + + wsptr = workspace; + for (ctr = 0; ctr < 4; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part: reverse the even part of the forward DCT. + * The rotator is c(-6). + */ + + /* Add range center and fudge factor for final descale and range-limit. */ + z2 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + z3 = (INT32) wsptr[4]; + + tmp0 = (z2 + z3) << CONST_BITS; + tmp1 = (z2 - z3) << CONST_BITS; + + z2 = (INT32) wsptr[2]; + z3 = (INT32) wsptr[6]; + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + tmp2 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */ + tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */ + + tmp10 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + tmp11 = tmp1 + tmp3; + tmp12 = tmp1 - tmp3; + + /* Odd part per figure 8; the matrix is unitary and hence its + * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. + */ + + tmp0 = (INT32) wsptr[7]; + tmp1 = (INT32) wsptr[5]; + tmp2 = (INT32) wsptr[3]; + tmp3 = (INT32) wsptr[1]; + + z2 = tmp0 + tmp2; + z3 = tmp1 + tmp3; + + z1 = MULTIPLY(z2 + z3, FIX_1_175875602); /* c3 */ + z2 = MULTIPLY(z2, - FIX_1_961570560); /* -c3-c5 */ + z3 = MULTIPLY(z3, - FIX_0_390180644); /* -c3+c5 */ + z2 += z1; + z3 += z1; + + z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* -c3+c7 */ + tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* -c1+c3+c5-c7 */ + tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* c1+c3-c5-c7 */ + tmp0 += z1 + z2; + tmp3 += z1 + z3; + + z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* -c1-c3 */ + tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* c1+c3-c5+c7 */ + tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* c1+c3+c5-c7 */ + tmp1 += z1 + z3; + tmp2 += z1 + z2; + + /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp13 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp13 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += DCTSIZE; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a reduced-size 6x3 output block. + * + * 3-point IDCT in pass 1 (columns), 6-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_6x3 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp10, tmp11, tmp12; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[6*3]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 3-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/6). + */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 6; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp0 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-PASS1_BITS-1); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + tmp12 = MULTIPLY(tmp2, FIX(0.707106781)); /* c2 */ + tmp10 = tmp0 + tmp12; + tmp2 = tmp0 - tmp12 - tmp12; + + /* Odd part */ + + tmp12 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + tmp0 = MULTIPLY(tmp12, FIX(1.224744871)); /* c1 */ + + /* Final output stage */ + + wsptr[6*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[6*2] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS); + wsptr[6*1] = (int) RIGHT_SHIFT(tmp2, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 3 rows from work array, store into output array. + * 6-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/12). + */ + + wsptr = workspace; + for (ctr = 0; ctr < 3; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + tmp0 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + tmp0 <<= CONST_BITS; + tmp2 = (INT32) wsptr[4]; + tmp10 = MULTIPLY(tmp2, FIX(0.707106781)); /* c4 */ + tmp1 = tmp0 + tmp10; + tmp11 = tmp0 - tmp10 - tmp10; + tmp10 = (INT32) wsptr[2]; + tmp0 = MULTIPLY(tmp10, FIX(1.224744871)); /* c2 */ + tmp10 = tmp1 + tmp0; + tmp12 = tmp1 - tmp0; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + tmp1 = MULTIPLY(z1 + z3, FIX(0.366025404)); /* c5 */ + tmp0 = tmp1 + ((z1 + z2) << CONST_BITS); + tmp2 = tmp1 + ((z3 - z2) << CONST_BITS); + tmp1 = (z1 - z2 - z3) << CONST_BITS; + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 6; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 4x2 output block. + * + * 2-point IDCT in pass 1 (columns), 4-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_4x2 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp2, tmp10, tmp12; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + INT32 * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + INT32 workspace[4*2]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 4; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp10 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + + /* Odd part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + + /* Final output stage */ + + wsptr[4*0] = tmp10 + tmp0; + wsptr[4*1] = tmp10 - tmp0; + } + + /* Pass 2: process 2 rows from work array, store into output array. + * 4-point IDCT kernel, + * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point IDCT]. + */ + + wsptr = workspace; + for (ctr = 0; ctr < 2; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + tmp0 = wsptr[0] + ((((INT32) RANGE_CENTER) << 3) + (ONE << 2)); + tmp2 = wsptr[2]; + + tmp10 = (tmp0 + tmp2) << CONST_BITS; + tmp12 = (tmp0 - tmp2) << CONST_BITS; + + /* Odd part */ + /* Same rotation as in the even part of the 8x8 LL&M IDCT */ + + z2 = wsptr[1]; + z3 = wsptr[3]; + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + tmp0 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */ + tmp2 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2, + CONST_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2, + CONST_BITS+3) + & RANGE_MASK]; + + wsptr += 4; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 2x1 output block. + * + * 1-point IDCT in pass 1 (columns), 2-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_2x1 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + DCTELEM tmp0, tmp1; + ISLOW_MULT_TYPE * quantptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + ISHIFT_TEMPS + + /* Pass 1: empty. */ + + /* Pass 2: process 1 row from input, store into output array. */ + + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + outptr = output_buf[0] + output_col; + + /* Even part */ + + tmp0 = DEQUANTIZE(coef_block[0], quantptr[0]); + /* Add range center and fudge factor for final descale and range-limit. */ + tmp0 += (((DCTELEM) RANGE_CENTER) << 3) + (1 << 2); + + /* Odd part */ + + tmp1 = DEQUANTIZE(coef_block[1], quantptr[1]); + + /* Final output stage */ + + outptr[0] = range_limit[(int) IRIGHT_SHIFT(tmp0 + tmp1, 3) & RANGE_MASK]; + outptr[1] = range_limit[(int) IRIGHT_SHIFT(tmp0 - tmp1, 3) & RANGE_MASK]; +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 8x16 output block. + * + * 16-point IDCT in pass 1 (columns), 8-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_8x16 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp10, tmp11, tmp12, tmp13; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26, tmp27; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*16]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 16-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/32). + */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp0 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-PASS1_BITS-1); + + z1 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + tmp1 = MULTIPLY(z1, FIX(1.306562965)); /* c4[16] = c2[8] */ + tmp2 = MULTIPLY(z1, FIX_0_541196100); /* c12[16] = c6[8] */ + + tmp10 = tmp0 + tmp1; + tmp11 = tmp0 - tmp1; + tmp12 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z2 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + z3 = z1 - z2; + z4 = MULTIPLY(z3, FIX(0.275899379)); /* c14[16] = c7[8] */ + z3 = MULTIPLY(z3, FIX(1.387039845)); /* c2[16] = c1[8] */ + + tmp0 = z3 + MULTIPLY(z2, FIX_2_562915447); /* (c6+c2)[16] = (c3+c1)[8] */ + tmp1 = z4 + MULTIPLY(z1, FIX_0_899976223); /* (c6-c14)[16] = (c3-c7)[8] */ + tmp2 = z3 - MULTIPLY(z1, FIX(0.601344887)); /* (c2-c10)[16] = (c1-c5)[8] */ + tmp3 = z4 - MULTIPLY(z2, FIX(0.509795579)); /* (c10-c14)[16] = (c5-c7)[8] */ + + tmp20 = tmp10 + tmp0; + tmp27 = tmp10 - tmp0; + tmp21 = tmp12 + tmp1; + tmp26 = tmp12 - tmp1; + tmp22 = tmp13 + tmp2; + tmp25 = tmp13 - tmp2; + tmp23 = tmp11 + tmp3; + tmp24 = tmp11 - tmp3; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + tmp11 = z1 + z3; + + tmp1 = MULTIPLY(z1 + z2, FIX(1.353318001)); /* c3 */ + tmp2 = MULTIPLY(tmp11, FIX(1.247225013)); /* c5 */ + tmp3 = MULTIPLY(z1 + z4, FIX(1.093201867)); /* c7 */ + tmp10 = MULTIPLY(z1 - z4, FIX(0.897167586)); /* c9 */ + tmp11 = MULTIPLY(tmp11, FIX(0.666655658)); /* c11 */ + tmp12 = MULTIPLY(z1 - z2, FIX(0.410524528)); /* c13 */ + tmp0 = tmp1 + tmp2 + tmp3 - + MULTIPLY(z1, FIX(2.286341144)); /* c7+c5+c3-c1 */ + tmp13 = tmp10 + tmp11 + tmp12 - + MULTIPLY(z1, FIX(1.835730603)); /* c9+c11+c13-c15 */ + z1 = MULTIPLY(z2 + z3, FIX(0.138617169)); /* c15 */ + tmp1 += z1 + MULTIPLY(z2, FIX(0.071888074)); /* c9+c11-c3-c15 */ + tmp2 += z1 - MULTIPLY(z3, FIX(1.125726048)); /* c5+c7+c15-c3 */ + z1 = MULTIPLY(z3 - z2, FIX(1.407403738)); /* c1 */ + tmp11 += z1 - MULTIPLY(z3, FIX(0.766367282)); /* c1+c11-c9-c13 */ + tmp12 += z1 + MULTIPLY(z2, FIX(1.971951411)); /* c1+c5+c13-c7 */ + z2 += z4; + z1 = MULTIPLY(z2, - FIX(0.666655658)); /* -c11 */ + tmp1 += z1; + tmp3 += z1 + MULTIPLY(z4, FIX(1.065388962)); /* c3+c11+c15-c7 */ + z2 = MULTIPLY(z2, - FIX(1.247225013)); /* -c5 */ + tmp10 += z2 + MULTIPLY(z4, FIX(3.141271809)); /* c1+c5+c9-c13 */ + tmp12 += z2; + z2 = MULTIPLY(z3 + z4, - FIX(1.353318001)); /* -c3 */ + tmp2 += z2; + tmp3 += z2; + z2 = MULTIPLY(z4 - z3, FIX(0.410524528)); /* c13 */ + tmp10 += z2; + tmp11 += z2; + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[8*15] = (int) RIGHT_SHIFT(tmp20 - tmp0, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp1, CONST_BITS-PASS1_BITS); + wsptr[8*14] = (int) RIGHT_SHIFT(tmp21 - tmp1, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[8*13] = (int) RIGHT_SHIFT(tmp22 - tmp2, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp23 + tmp3, CONST_BITS-PASS1_BITS); + wsptr[8*12] = (int) RIGHT_SHIFT(tmp23 - tmp3, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*11] = (int) RIGHT_SHIFT(tmp24 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp25 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*10] = (int) RIGHT_SHIFT(tmp25 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp26 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*9] = (int) RIGHT_SHIFT(tmp26 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*7] = (int) RIGHT_SHIFT(tmp27 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*8] = (int) RIGHT_SHIFT(tmp27 - tmp13, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process rows from work array, store into output array. + * Note that we must descale the results by a factor of 8 == 2**3, + * and also undo the PASS1_BITS scaling. + * 8-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/16). + */ + + wsptr = workspace; + for (ctr = 0; ctr < 16; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part: reverse the even part of the forward DCT. + * The rotator is c(-6). + */ + + /* Add range center and fudge factor for final descale and range-limit. */ + z2 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + z3 = (INT32) wsptr[4]; + + tmp0 = (z2 + z3) << CONST_BITS; + tmp1 = (z2 - z3) << CONST_BITS; + + z2 = (INT32) wsptr[2]; + z3 = (INT32) wsptr[6]; + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + tmp2 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */ + tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */ + + tmp10 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + tmp11 = tmp1 + tmp3; + tmp12 = tmp1 - tmp3; + + /* Odd part per figure 8; the matrix is unitary and hence its + * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. + */ + + tmp0 = (INT32) wsptr[7]; + tmp1 = (INT32) wsptr[5]; + tmp2 = (INT32) wsptr[3]; + tmp3 = (INT32) wsptr[1]; + + z2 = tmp0 + tmp2; + z3 = tmp1 + tmp3; + + z1 = MULTIPLY(z2 + z3, FIX_1_175875602); /* c3 */ + z2 = MULTIPLY(z2, - FIX_1_961570560); /* -c3-c5 */ + z3 = MULTIPLY(z3, - FIX_0_390180644); /* -c3+c5 */ + z2 += z1; + z3 += z1; + + z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* -c3+c7 */ + tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* -c1+c3+c5-c7 */ + tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* c1+c3-c5-c7 */ + tmp0 += z1 + z2; + tmp3 += z1 + z3; + + z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* -c1-c3 */ + tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* c1+c3-c5+c7 */ + tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* c1+c3+c5-c7 */ + tmp1 += z1 + z3; + tmp2 += z1 + z2; + + /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp13 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp13 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += DCTSIZE; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 7x14 output block. + * + * 14-point IDCT in pass 1 (columns), 7-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_7x14 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[7*14]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 14-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/28). + */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 7; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z1 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-1); + z4 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z2 = MULTIPLY(z4, FIX(1.274162392)); /* c4 */ + z3 = MULTIPLY(z4, FIX(0.314692123)); /* c12 */ + z4 = MULTIPLY(z4, FIX(0.881747734)); /* c8 */ + + tmp10 = z1 + z2; + tmp11 = z1 + z3; + tmp12 = z1 - z4; + + tmp23 = RIGHT_SHIFT(z1 - ((z2 + z3 - z4) << 1), /* c0 = (c4+c12-c8)*2 */ + CONST_BITS-PASS1_BITS); + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z2 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + z3 = MULTIPLY(z1 + z2, FIX(1.105676686)); /* c6 */ + + tmp13 = z3 + MULTIPLY(z1, FIX(0.273079590)); /* c2-c6 */ + tmp14 = z3 - MULTIPLY(z2, FIX(1.719280954)); /* c6+c10 */ + tmp15 = MULTIPLY(z1, FIX(0.613604268)) - /* c10 */ + MULTIPLY(z2, FIX(1.378756276)); /* c2 */ + + tmp20 = tmp10 + tmp13; + tmp26 = tmp10 - tmp13; + tmp21 = tmp11 + tmp14; + tmp25 = tmp11 - tmp14; + tmp22 = tmp12 + tmp15; + tmp24 = tmp12 - tmp15; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + tmp13 = z4 << CONST_BITS; + + tmp14 = z1 + z3; + tmp11 = MULTIPLY(z1 + z2, FIX(1.334852607)); /* c3 */ + tmp12 = MULTIPLY(tmp14, FIX(1.197448846)); /* c5 */ + tmp10 = tmp11 + tmp12 + tmp13 - MULTIPLY(z1, FIX(1.126980169)); /* c3+c5-c1 */ + tmp14 = MULTIPLY(tmp14, FIX(0.752406978)); /* c9 */ + tmp16 = tmp14 - MULTIPLY(z1, FIX(1.061150426)); /* c9+c11-c13 */ + z1 -= z2; + tmp15 = MULTIPLY(z1, FIX(0.467085129)) - tmp13; /* c11 */ + tmp16 += tmp15; + z1 += z4; + z4 = MULTIPLY(z2 + z3, - FIX(0.158341681)) - tmp13; /* -c13 */ + tmp11 += z4 - MULTIPLY(z2, FIX(0.424103948)); /* c3-c9-c13 */ + tmp12 += z4 - MULTIPLY(z3, FIX(2.373959773)); /* c3+c5-c13 */ + z4 = MULTIPLY(z3 - z2, FIX(1.405321284)); /* c1 */ + tmp14 += z4 + tmp13 - MULTIPLY(z3, FIX(1.6906431334)); /* c1+c9-c11 */ + tmp15 += z4 + MULTIPLY(z2, FIX(0.674957567)); /* c1+c11-c5 */ + + tmp13 = (z1 - z3) << PASS1_BITS; + + /* Final output stage */ + + wsptr[7*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[7*13] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[7*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[7*12] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[7*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[7*11] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[7*3] = (int) (tmp23 + tmp13); + wsptr[7*10] = (int) (tmp23 - tmp13); + wsptr[7*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[7*9] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); + wsptr[7*5] = (int) RIGHT_SHIFT(tmp25 + tmp15, CONST_BITS-PASS1_BITS); + wsptr[7*8] = (int) RIGHT_SHIFT(tmp25 - tmp15, CONST_BITS-PASS1_BITS); + wsptr[7*6] = (int) RIGHT_SHIFT(tmp26 + tmp16, CONST_BITS-PASS1_BITS); + wsptr[7*7] = (int) RIGHT_SHIFT(tmp26 - tmp16, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 14 rows from work array, store into output array. + * 7-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/14). + */ + + wsptr = workspace; + for (ctr = 0; ctr < 14; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + tmp23 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + tmp23 <<= CONST_BITS; + + z1 = (INT32) wsptr[2]; + z2 = (INT32) wsptr[4]; + z3 = (INT32) wsptr[6]; + + tmp20 = MULTIPLY(z2 - z3, FIX(0.881747734)); /* c4 */ + tmp22 = MULTIPLY(z1 - z2, FIX(0.314692123)); /* c6 */ + tmp21 = tmp20 + tmp22 + tmp23 - MULTIPLY(z2, FIX(1.841218003)); /* c2+c4-c6 */ + tmp10 = z1 + z3; + z2 -= tmp10; + tmp10 = MULTIPLY(tmp10, FIX(1.274162392)) + tmp23; /* c2 */ + tmp20 += tmp10 - MULTIPLY(z3, FIX(0.077722536)); /* c2-c4-c6 */ + tmp22 += tmp10 - MULTIPLY(z1, FIX(2.470602249)); /* c2+c4+c6 */ + tmp23 += MULTIPLY(z2, FIX(1.414213562)); /* c0 */ + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + + tmp11 = MULTIPLY(z1 + z2, FIX(0.935414347)); /* (c3+c1-c5)/2 */ + tmp12 = MULTIPLY(z1 - z2, FIX(0.170262339)); /* (c3+c5-c1)/2 */ + tmp10 = tmp11 - tmp12; + tmp11 += tmp12; + tmp12 = MULTIPLY(z2 + z3, - FIX(1.378756276)); /* -c1 */ + tmp11 += tmp12; + z2 = MULTIPLY(z1 + z3, FIX(0.613604268)); /* c5 */ + tmp10 += z2; + tmp12 += z2 + MULTIPLY(z3, FIX(1.870828693)); /* c3+c1-c5 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 7; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 6x12 output block. + * + * 12-point IDCT in pass 1 (columns), 6-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_6x12 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[6*12]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 12-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/24). + */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 6; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + z3 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z3 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z3 += ONE << (CONST_BITS-PASS1_BITS-1); + + z4 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z4 = MULTIPLY(z4, FIX(1.224744871)); /* c4 */ + + tmp10 = z3 + z4; + tmp11 = z3 - z4; + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z4 = MULTIPLY(z1, FIX(1.366025404)); /* c2 */ + z1 <<= CONST_BITS; + z2 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + z2 <<= CONST_BITS; + + tmp12 = z1 - z2; + + tmp21 = z3 + tmp12; + tmp24 = z3 - tmp12; + + tmp12 = z4 + z2; + + tmp20 = tmp10 + tmp12; + tmp25 = tmp10 - tmp12; + + tmp12 = z4 - z1 - z2; + + tmp22 = tmp11 + tmp12; + tmp23 = tmp11 - tmp12; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + tmp11 = MULTIPLY(z2, FIX(1.306562965)); /* c3 */ + tmp14 = MULTIPLY(z2, - FIX_0_541196100); /* -c9 */ + + tmp10 = z1 + z3; + tmp15 = MULTIPLY(tmp10 + z4, FIX(0.860918669)); /* c7 */ + tmp12 = tmp15 + MULTIPLY(tmp10, FIX(0.261052384)); /* c5-c7 */ + tmp10 = tmp12 + tmp11 + MULTIPLY(z1, FIX(0.280143716)); /* c1-c5 */ + tmp13 = MULTIPLY(z3 + z4, - FIX(1.045510580)); /* -(c7+c11) */ + tmp12 += tmp13 + tmp14 - MULTIPLY(z3, FIX(1.478575242)); /* c1+c5-c7-c11 */ + tmp13 += tmp15 - tmp11 + MULTIPLY(z4, FIX(1.586706681)); /* c1+c11 */ + tmp15 += tmp14 - MULTIPLY(z1, FIX(0.676326758)) - /* c7-c11 */ + MULTIPLY(z4, FIX(1.982889723)); /* c5+c7 */ + + z1 -= z4; + z2 -= z3; + z3 = MULTIPLY(z1 + z2, FIX_0_541196100); /* c9 */ + tmp11 = z3 + MULTIPLY(z1, FIX_0_765366865); /* c3-c9 */ + tmp14 = z3 - MULTIPLY(z2, FIX_1_847759065); /* c3+c9 */ + + /* Final output stage */ + + wsptr[6*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[6*11] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[6*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[6*10] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[6*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[6*9] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[6*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[6*8] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS); + wsptr[6*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[6*7] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); + wsptr[6*5] = (int) RIGHT_SHIFT(tmp25 + tmp15, CONST_BITS-PASS1_BITS); + wsptr[6*6] = (int) RIGHT_SHIFT(tmp25 - tmp15, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 12 rows from work array, store into output array. + * 6-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/12). + */ + + wsptr = workspace; + for (ctr = 0; ctr < 12; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + tmp10 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + tmp10 <<= CONST_BITS; + tmp12 = (INT32) wsptr[4]; + tmp20 = MULTIPLY(tmp12, FIX(0.707106781)); /* c4 */ + tmp11 = tmp10 + tmp20; + tmp21 = tmp10 - tmp20 - tmp20; + tmp20 = (INT32) wsptr[2]; + tmp10 = MULTIPLY(tmp20, FIX(1.224744871)); /* c2 */ + tmp20 = tmp11 + tmp10; + tmp22 = tmp11 - tmp10; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + tmp11 = MULTIPLY(z1 + z3, FIX(0.366025404)); /* c5 */ + tmp10 = tmp11 + ((z1 + z2) << CONST_BITS); + tmp12 = tmp11 + ((z3 - z2) << CONST_BITS); + tmp11 = (z1 - z2 - z3) << CONST_BITS; + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 6; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 5x10 output block. + * + * 10-point IDCT in pass 1 (columns), 5-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_5x10 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24; + INT32 z1, z2, z3, z4, z5; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[5*10]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 10-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/20). + */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 5; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + z3 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z3 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z3 += ONE << (CONST_BITS-PASS1_BITS-1); + z4 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z1 = MULTIPLY(z4, FIX(1.144122806)); /* c4 */ + z2 = MULTIPLY(z4, FIX(0.437016024)); /* c8 */ + tmp10 = z3 + z1; + tmp11 = z3 - z2; + + tmp22 = RIGHT_SHIFT(z3 - ((z1 - z2) << 1), /* c0 = (c4-c8)*2 */ + CONST_BITS-PASS1_BITS); + + z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c6 */ + tmp12 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c2-c6 */ + tmp13 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c2+c6 */ + + tmp20 = tmp10 + tmp12; + tmp24 = tmp10 - tmp12; + tmp21 = tmp11 + tmp13; + tmp23 = tmp11 - tmp13; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + tmp11 = z2 + z4; + tmp13 = z2 - z4; + + tmp12 = MULTIPLY(tmp13, FIX(0.309016994)); /* (c3-c7)/2 */ + z5 = z3 << CONST_BITS; + + z2 = MULTIPLY(tmp11, FIX(0.951056516)); /* (c3+c7)/2 */ + z4 = z5 + tmp12; + + tmp10 = MULTIPLY(z1, FIX(1.396802247)) + z2 + z4; /* c1 */ + tmp14 = MULTIPLY(z1, FIX(0.221231742)) - z2 + z4; /* c9 */ + + z2 = MULTIPLY(tmp11, FIX(0.587785252)); /* (c1-c9)/2 */ + z4 = z5 - tmp12 - (tmp13 << (CONST_BITS - 1)); + + tmp12 = (z1 - tmp13 - z3) << PASS1_BITS; + + tmp11 = MULTIPLY(z1, FIX(1.260073511)) - z2 - z4; /* c3 */ + tmp13 = MULTIPLY(z1, FIX(0.642039522)) - z2 + z4; /* c7 */ + + /* Final output stage */ + + wsptr[5*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[5*9] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[5*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[5*8] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[5*2] = (int) (tmp22 + tmp12); + wsptr[5*7] = (int) (tmp22 - tmp12); + wsptr[5*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[5*6] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS); + wsptr[5*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[5*5] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 10 rows from work array, store into output array. + * 5-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/10). + */ + + wsptr = workspace; + for (ctr = 0; ctr < 10; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + tmp12 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + tmp12 <<= CONST_BITS; + tmp13 = (INT32) wsptr[2]; + tmp14 = (INT32) wsptr[4]; + z1 = MULTIPLY(tmp13 + tmp14, FIX(0.790569415)); /* (c2+c4)/2 */ + z2 = MULTIPLY(tmp13 - tmp14, FIX(0.353553391)); /* (c2-c4)/2 */ + z3 = tmp12 + z2; + tmp10 = z3 + z1; + tmp11 = z3 - z1; + tmp12 -= z2 << 2; + + /* Odd part */ + + z2 = (INT32) wsptr[1]; + z3 = (INT32) wsptr[3]; + + z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c3 */ + tmp13 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c1-c3 */ + tmp14 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c1+c3 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 5; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 4x8 output block. + * + * 8-point IDCT in pass 1 (columns), 4-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_4x8 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3; + INT32 tmp10, tmp11, tmp12, tmp13; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[4*8]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * Note results are scaled up by sqrt(8) compared to a true IDCT; + * furthermore, we scale the results by 2**PASS1_BITS. + * 8-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/16). + */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 4; ctr > 0; ctr--) { + /* Due to quantization, we will usually find that many of the input + * coefficients are zero, especially the AC terms. We can exploit this + * by short-circuiting the IDCT calculation for any column in which all + * the AC terms are zero. In that case each output is equal to the + * DC coefficient (with scale factor as needed). + * With typical images and quantization tables, half or more of the + * column DCT calculations can be simplified this way. + */ + + if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 && + inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 && + inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 && + inptr[DCTSIZE*7] == 0) { + /* AC terms all zero */ + int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS; + + wsptr[4*0] = dcval; + wsptr[4*1] = dcval; + wsptr[4*2] = dcval; + wsptr[4*3] = dcval; + wsptr[4*4] = dcval; + wsptr[4*5] = dcval; + wsptr[4*6] = dcval; + wsptr[4*7] = dcval; + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + continue; + } + + /* Even part: reverse the even part of the forward DCT. + * The rotator is c(-6). + */ + + z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + tmp2 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */ + tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */ + + z2 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z3 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z2 <<= CONST_BITS; + z3 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z2 += ONE << (CONST_BITS-PASS1_BITS-1); + + tmp0 = z2 + z3; + tmp1 = z2 - z3; + + tmp10 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + tmp11 = tmp1 + tmp3; + tmp12 = tmp1 - tmp3; + + /* Odd part per figure 8; the matrix is unitary and hence its + * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. + */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + tmp1 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + tmp3 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + + z2 = tmp0 + tmp2; + z3 = tmp1 + tmp3; + + z1 = MULTIPLY(z2 + z3, FIX_1_175875602); /* c3 */ + z2 = MULTIPLY(z2, - FIX_1_961570560); /* -c3-c5 */ + z3 = MULTIPLY(z3, - FIX_0_390180644); /* -c3+c5 */ + z2 += z1; + z3 += z1; + + z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* -c3+c7 */ + tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* -c1+c3+c5-c7 */ + tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* c1+c3-c5-c7 */ + tmp0 += z1 + z2; + tmp3 += z1 + z3; + + z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* -c1-c3 */ + tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* c1+c3-c5+c7 */ + tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* c1+c3+c5-c7 */ + tmp1 += z1 + z3; + tmp2 += z1 + z2; + + /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ + + wsptr[4*0] = (int) RIGHT_SHIFT(tmp10 + tmp3, CONST_BITS-PASS1_BITS); + wsptr[4*7] = (int) RIGHT_SHIFT(tmp10 - tmp3, CONST_BITS-PASS1_BITS); + wsptr[4*1] = (int) RIGHT_SHIFT(tmp11 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[4*6] = (int) RIGHT_SHIFT(tmp11 - tmp2, CONST_BITS-PASS1_BITS); + wsptr[4*2] = (int) RIGHT_SHIFT(tmp12 + tmp1, CONST_BITS-PASS1_BITS); + wsptr[4*5] = (int) RIGHT_SHIFT(tmp12 - tmp1, CONST_BITS-PASS1_BITS); + wsptr[4*3] = (int) RIGHT_SHIFT(tmp13 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[4*4] = (int) RIGHT_SHIFT(tmp13 - tmp0, CONST_BITS-PASS1_BITS); + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + } + + /* Pass 2: process 8 rows from work array, store into output array. + * 4-point IDCT kernel, + * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point IDCT]. + */ + + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + tmp0 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + tmp2 = (INT32) wsptr[2]; + + tmp10 = (tmp0 + tmp2) << CONST_BITS; + tmp12 = (tmp0 - tmp2) << CONST_BITS; + + /* Odd part */ + /* Same rotation as in the even part of the 8x8 LL&M IDCT */ + + z2 = (INT32) wsptr[1]; + z3 = (INT32) wsptr[3]; + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + tmp0 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */ + tmp2 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 4; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a reduced-size 3x6 output block. + * + * 6-point IDCT in pass 1 (columns), 3-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_3x6 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp10, tmp11, tmp12; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[3*6]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 6-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/12). + */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 3; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp0 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-PASS1_BITS-1); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + tmp10 = MULTIPLY(tmp2, FIX(0.707106781)); /* c4 */ + tmp1 = tmp0 + tmp10; + tmp11 = RIGHT_SHIFT(tmp0 - tmp10 - tmp10, CONST_BITS-PASS1_BITS); + tmp10 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + tmp0 = MULTIPLY(tmp10, FIX(1.224744871)); /* c2 */ + tmp10 = tmp1 + tmp0; + tmp12 = tmp1 - tmp0; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + tmp1 = MULTIPLY(z1 + z3, FIX(0.366025404)); /* c5 */ + tmp0 = tmp1 + ((z1 + z2) << CONST_BITS); + tmp2 = tmp1 + ((z3 - z2) << CONST_BITS); + tmp1 = (z1 - z2 - z3) << PASS1_BITS; + + /* Final output stage */ + + wsptr[3*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[3*5] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS); + wsptr[3*1] = (int) (tmp11 + tmp1); + wsptr[3*4] = (int) (tmp11 - tmp1); + wsptr[3*2] = (int) RIGHT_SHIFT(tmp12 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[3*3] = (int) RIGHT_SHIFT(tmp12 - tmp2, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 6 rows from work array, store into output array. + * 3-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/6). + */ + + wsptr = workspace; + for (ctr = 0; ctr < 6; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + tmp0 = (INT32) wsptr[0] + + ((((INT32) RANGE_CENTER) << (PASS1_BITS+3)) + + (ONE << (PASS1_BITS+2))); + tmp0 <<= CONST_BITS; + tmp2 = (INT32) wsptr[2]; + tmp12 = MULTIPLY(tmp2, FIX(0.707106781)); /* c2 */ + tmp10 = tmp0 + tmp12; + tmp2 = tmp0 - tmp12 - tmp12; + + /* Odd part */ + + tmp12 = (INT32) wsptr[1]; + tmp0 = MULTIPLY(tmp12, FIX(1.224744871)); /* c1 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 3; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 2x4 output block. + * + * 4-point IDCT in pass 1 (columns), 2-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_2x4 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp2, tmp10, tmp12; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + INT32 * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + INT32 workspace[2*4]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 4-point IDCT kernel, + * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point IDCT]. + */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 2; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + + tmp10 = (tmp0 + tmp2) << CONST_BITS; + tmp12 = (tmp0 - tmp2) << CONST_BITS; + + /* Odd part */ + /* Same rotation as in the even part of the 8x8 LL&M IDCT */ + + z2 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + tmp0 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */ + tmp2 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */ + + /* Final output stage */ + + wsptr[2*0] = tmp10 + tmp0; + wsptr[2*3] = tmp10 - tmp0; + wsptr[2*1] = tmp12 + tmp2; + wsptr[2*2] = tmp12 - tmp2; + } + + /* Pass 2: process 4 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 4; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add range center and fudge factor for final descale and range-limit. */ + tmp10 = wsptr[0] + + ((((INT32) RANGE_CENTER) << (CONST_BITS+3)) + + (ONE << (CONST_BITS+2))); + + /* Odd part */ + + tmp0 = wsptr[1]; + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS+3) + & RANGE_MASK]; + + wsptr += 2; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 1x2 output block. + * + * 2-point IDCT in pass 1 (columns), 1-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_1x2 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + DCTELEM tmp0, tmp1; + ISLOW_MULT_TYPE * quantptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + ISHIFT_TEMPS + + /* Process 1 column from input, store into output array. */ + + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + + /* Even part */ + + tmp0 = DEQUANTIZE(coef_block[DCTSIZE*0], quantptr[DCTSIZE*0]); + /* Add range center and fudge factor for final descale and range-limit. */ + tmp0 += (((DCTELEM) RANGE_CENTER) << 3) + (1 << 2); + + /* Odd part */ + + tmp1 = DEQUANTIZE(coef_block[DCTSIZE*1], quantptr[DCTSIZE*1]); + + /* Final output stage */ + + output_buf[0][output_col] = + range_limit[(int) IRIGHT_SHIFT(tmp0 + tmp1, 3) & RANGE_MASK]; + output_buf[1][output_col] = + range_limit[(int) IRIGHT_SHIFT(tmp0 - tmp1, 3) & RANGE_MASK]; +} + +#endif /* IDCT_SCALING_SUPPORTED */ +#endif /* DCT_ISLOW_SUPPORTED */ diff --git a/compat/libjpeg/jinclude.h b/compat/libjpeg/jinclude.h new file mode 100755 index 0000000..5ff60fe --- /dev/null +++ b/compat/libjpeg/jinclude.h @@ -0,0 +1,91 @@ +/* + * jinclude.h + * + * Copyright (C) 1991-1994, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file exists to provide a single place to fix any problems with + * including the wrong system include files. (Common problems are taken + * care of by the standard jconfig symbols, but on really weird systems + * you may have to edit this file.) + * + * NOTE: this file is NOT intended to be included by applications using the + * JPEG library. Most applications need only include jpeglib.h. + */ + + +/* Include auto-config file to find out which system include files we need. */ + +#include "jconfig.h" /* auto configuration options */ +#define JCONFIG_INCLUDED /* so that jpeglib.h doesn't do it again */ + +/* + * We need the NULL macro and size_t typedef. + * On an ANSI-conforming system it is sufficient to include . + * Otherwise, we get them from or ; we may have to + * pull in as well. + * Note that the core JPEG library does not require ; + * only the default error handler and data source/destination modules do. + * But we must pull it in because of the references to FILE in jpeglib.h. + * You can remove those references if you want to compile without . + */ + +#ifdef HAVE_STDDEF_H +#include +#endif + +#ifdef HAVE_STDLIB_H +#include +#endif + +#ifdef NEED_SYS_TYPES_H +#include +#endif + +#include + +/* + * We need memory copying and zeroing functions, plus strncpy(). + * ANSI and System V implementations declare these in . + * BSD doesn't have the mem() functions, but it does have bcopy()/bzero(). + * Some systems may declare memset and memcpy in . + * + * NOTE: we assume the size parameters to these functions are of type size_t. + * Change the casts in these macros if not! + */ + +#ifdef NEED_BSD_STRINGS + +#include +#define MEMZERO(target,size) bzero((void *)(target), (size_t)(size)) +#define MEMCOPY(dest,src,size) bcopy((const void *)(src), (void *)(dest), (size_t)(size)) + +#else /* not BSD, assume ANSI/SysV string lib */ + +#include +#define MEMZERO(target,size) memset((void *)(target), 0, (size_t)(size)) +#define MEMCOPY(dest,src,size) memcpy((void *)(dest), (const void *)(src), (size_t)(size)) + +#endif + +/* + * In ANSI C, and indeed any rational implementation, size_t is also the + * type returned by sizeof(). However, it seems there are some irrational + * implementations out there, in which sizeof() returns an int even though + * size_t is defined as long or unsigned long. To ensure consistent results + * we always use this SIZEOF() macro in place of using sizeof() directly. + */ + +#define SIZEOF(object) ((size_t) sizeof(object)) + +/* + * The modules that use fread() and fwrite() always invoke them through + * these macros. On some systems you may need to twiddle the argument casts. + * CAUTION: argument order is different from underlying functions! + */ + +#define JFREAD(file,buf,sizeofbuf) \ + ((size_t) fread((void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file))) +#define JFWRITE(file,buf,sizeofbuf) \ + ((size_t) fwrite((const void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file))) diff --git a/compat/libjpeg/jmemansi.c b/compat/libjpeg/jmemansi.c new file mode 100755 index 0000000..b5da474 --- /dev/null +++ b/compat/libjpeg/jmemansi.c @@ -0,0 +1,167 @@ +/* + * jmemansi.c + * + * Copyright (C) 1992-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file provides a simple generic implementation of the system- + * dependent portion of the JPEG memory manager. This implementation + * assumes that you have the ANSI-standard library routine tmpfile(). + * Also, the problem of determining the amount of memory available + * is shoved onto the user. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jmemsys.h" /* import the system-dependent declarations */ + +#ifndef HAVE_STDLIB_H /* should declare malloc(),free() */ +extern void * malloc JPP((size_t size)); +extern void free JPP((void *ptr)); +#endif + +#ifndef SEEK_SET /* pre-ANSI systems may not define this; */ +#define SEEK_SET 0 /* if not, assume 0 is correct */ +#endif + + +/* + * Memory allocation and freeing are controlled by the regular library + * routines malloc() and free(). + */ + +GLOBAL(void *) +jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject) +{ + return (void *) malloc(sizeofobject); +} + +GLOBAL(void) +jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject) +{ + free(object); +} + + +/* + * "Large" objects are treated the same as "small" ones. + * NB: although we include FAR keywords in the routine declarations, + * this file won't actually work in 80x86 small/medium model; at least, + * you probably won't be able to process useful-size images in only 64KB. + */ + +GLOBAL(void FAR *) +jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject) +{ + return (void FAR *) malloc(sizeofobject); +} + +GLOBAL(void) +jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject) +{ + free(object); +} + + +/* + * This routine computes the total memory space available for allocation. + * It's impossible to do this in a portable way; our current solution is + * to make the user tell us (with a default value set at compile time). + * If you can actually get the available space, it's a good idea to subtract + * a slop factor of 5% or so. + */ + +#ifndef DEFAULT_MAX_MEM /* so can override from makefile */ +#define DEFAULT_MAX_MEM 1000000L /* default: one megabyte */ +#endif + +GLOBAL(long) +jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed, + long max_bytes_needed, long already_allocated) +{ + return cinfo->mem->max_memory_to_use - already_allocated; +} + + +/* + * Backing store (temporary file) management. + * Backing store objects are only used when the value returned by + * jpeg_mem_available is less than the total space needed. You can dispense + * with these routines if you have plenty of virtual memory; see jmemnobs.c. + */ + + +METHODDEF(void) +read_backing_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + if (fseek(info->temp_file, file_offset, SEEK_SET)) + ERREXIT(cinfo, JERR_TFILE_SEEK); + if (JFREAD(info->temp_file, buffer_address, byte_count) + != (size_t) byte_count) + ERREXIT(cinfo, JERR_TFILE_READ); +} + + +METHODDEF(void) +write_backing_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + if (fseek(info->temp_file, file_offset, SEEK_SET)) + ERREXIT(cinfo, JERR_TFILE_SEEK); + if (JFWRITE(info->temp_file, buffer_address, byte_count) + != (size_t) byte_count) + ERREXIT(cinfo, JERR_TFILE_WRITE); +} + + +METHODDEF(void) +close_backing_store (j_common_ptr cinfo, backing_store_ptr info) +{ + fclose(info->temp_file); + /* Since this implementation uses tmpfile() to create the file, + * no explicit file deletion is needed. + */ +} + + +/* + * Initial opening of a backing-store object. + * + * This version uses tmpfile(), which constructs a suitable file name + * behind the scenes. We don't have to use info->temp_name[] at all; + * indeed, we can't even find out the actual name of the temp file. + */ + +GLOBAL(void) +jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info, + long total_bytes_needed) +{ + if ((info->temp_file = tmpfile()) == NULL) + ERREXITS(cinfo, JERR_TFILE_CREATE, ""); + info->read_backing_store = read_backing_store; + info->write_backing_store = write_backing_store; + info->close_backing_store = close_backing_store; +} + + +/* + * These routines take care of any system-dependent initialization and + * cleanup required. + */ + +GLOBAL(long) +jpeg_mem_init (j_common_ptr cinfo) +{ + return DEFAULT_MAX_MEM; /* default for max_memory_to_use */ +} + +GLOBAL(void) +jpeg_mem_term (j_common_ptr cinfo) +{ + /* no work */ +} diff --git a/compat/libjpeg/jmemdos.c b/compat/libjpeg/jmemdos.c new file mode 100755 index 0000000..0955047 --- /dev/null +++ b/compat/libjpeg/jmemdos.c @@ -0,0 +1,638 @@ +/* + * jmemdos.c + * + * Copyright (C) 1992-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file provides an MS-DOS-compatible implementation of the system- + * dependent portion of the JPEG memory manager. Temporary data can be + * stored in extended or expanded memory as well as in regular DOS files. + * + * If you use this file, you must be sure that NEED_FAR_POINTERS is defined + * if you compile in a small-data memory model; it should NOT be defined if + * you use a large-data memory model. This file is not recommended if you + * are using a flat-memory-space 386 environment such as DJGCC or Watcom C. + * Also, this code will NOT work if struct fields are aligned on greater than + * 2-byte boundaries. + * + * Based on code contributed by Ge' Weijers. + */ + +/* + * If you have both extended and expanded memory, you may want to change the + * order in which they are tried in jopen_backing_store. On a 286 machine + * expanded memory is usually faster, since extended memory access involves + * an expensive protected-mode-and-back switch. On 386 and better, extended + * memory is usually faster. As distributed, the code tries extended memory + * first (what? not everyone has a 386? :-). + * + * You can disable use of extended/expanded memory entirely by altering these + * definitions or overriding them from the Makefile (eg, -DEMS_SUPPORTED=0). + */ + +#ifndef XMS_SUPPORTED +#define XMS_SUPPORTED 1 +#endif +#ifndef EMS_SUPPORTED +#define EMS_SUPPORTED 1 +#endif + + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jmemsys.h" /* import the system-dependent declarations */ + +#ifndef HAVE_STDLIB_H /* should declare these */ +extern void * malloc JPP((size_t size)); +extern void free JPP((void *ptr)); +extern char * getenv JPP((const char * name)); +#endif + +#ifdef NEED_FAR_POINTERS + +#ifdef __TURBOC__ +/* These definitions work for Borland C (Turbo C) */ +#include /* need farmalloc(), farfree() */ +#define far_malloc(x) farmalloc(x) +#define far_free(x) farfree(x) +#else +/* These definitions work for Microsoft C and compatible compilers */ +#include /* need _fmalloc(), _ffree() */ +#define far_malloc(x) _fmalloc(x) +#define far_free(x) _ffree(x) +#endif + +#else /* not NEED_FAR_POINTERS */ + +#define far_malloc(x) malloc(x) +#define far_free(x) free(x) + +#endif /* NEED_FAR_POINTERS */ + +#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */ +#define READ_BINARY "r" +#else +#define READ_BINARY "rb" +#endif + +#ifndef USE_MSDOS_MEMMGR /* make sure user got configuration right */ + You forgot to define USE_MSDOS_MEMMGR in jconfig.h. /* deliberate syntax error */ +#endif + +#if MAX_ALLOC_CHUNK >= 65535L /* make sure jconfig.h got this right */ + MAX_ALLOC_CHUNK should be less than 64K. /* deliberate syntax error */ +#endif + + +/* + * Declarations for assembly-language support routines (see jmemdosa.asm). + * + * The functions are declared "far" as are all their pointer arguments; + * this ensures the assembly source code will work regardless of the + * compiler memory model. We assume "short" is 16 bits, "long" is 32. + */ + +typedef void far * XMSDRIVER; /* actually a pointer to code */ +typedef struct { /* registers for calling XMS driver */ + unsigned short ax, dx, bx; + void far * ds_si; + } XMScontext; +typedef struct { /* registers for calling EMS driver */ + unsigned short ax, dx, bx; + void far * ds_si; + } EMScontext; + +extern short far jdos_open JPP((short far * handle, char far * filename)); +extern short far jdos_close JPP((short handle)); +extern short far jdos_seek JPP((short handle, long offset)); +extern short far jdos_read JPP((short handle, void far * buffer, + unsigned short count)); +extern short far jdos_write JPP((short handle, void far * buffer, + unsigned short count)); +extern void far jxms_getdriver JPP((XMSDRIVER far *)); +extern void far jxms_calldriver JPP((XMSDRIVER, XMScontext far *)); +extern short far jems_available JPP((void)); +extern void far jems_calldriver JPP((EMScontext far *)); + + +/* + * Selection of a file name for a temporary file. + * This is highly system-dependent, and you may want to customize it. + */ + +static int next_file_num; /* to distinguish among several temp files */ + +LOCAL(void) +select_file_name (char * fname) +{ + const char * env; + char * ptr; + FILE * tfile; + + /* Keep generating file names till we find one that's not in use */ + for (;;) { + /* Get temp directory name from environment TMP or TEMP variable; + * if none, use "." + */ + if ((env = (const char *) getenv("TMP")) == NULL) + if ((env = (const char *) getenv("TEMP")) == NULL) + env = "."; + if (*env == '\0') /* null string means "." */ + env = "."; + ptr = fname; /* copy name to fname */ + while (*env != '\0') + *ptr++ = *env++; + if (ptr[-1] != '\\' && ptr[-1] != '/') + *ptr++ = '\\'; /* append backslash if not in env variable */ + /* Append a suitable file name */ + next_file_num++; /* advance counter */ + sprintf(ptr, "JPG%03d.TMP", next_file_num); + /* Probe to see if file name is already in use */ + if ((tfile = fopen(fname, READ_BINARY)) == NULL) + break; + fclose(tfile); /* oops, it's there; close tfile & try again */ + } +} + + +/* + * Near-memory allocation and freeing are controlled by the regular library + * routines malloc() and free(). + */ + +GLOBAL(void *) +jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject) +{ + return (void *) malloc(sizeofobject); +} + +GLOBAL(void) +jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject) +{ + free(object); +} + + +/* + * "Large" objects are allocated in far memory, if possible + */ + +GLOBAL(void FAR *) +jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject) +{ + return (void FAR *) far_malloc(sizeofobject); +} + +GLOBAL(void) +jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject) +{ + far_free(object); +} + + +/* + * This routine computes the total memory space available for allocation. + * It's impossible to do this in a portable way; our current solution is + * to make the user tell us (with a default value set at compile time). + * If you can actually get the available space, it's a good idea to subtract + * a slop factor of 5% or so. + */ + +#ifndef DEFAULT_MAX_MEM /* so can override from makefile */ +#define DEFAULT_MAX_MEM 300000L /* for total usage about 450K */ +#endif + +GLOBAL(long) +jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed, + long max_bytes_needed, long already_allocated) +{ + return cinfo->mem->max_memory_to_use - already_allocated; +} + + +/* + * Backing store (temporary file) management. + * Backing store objects are only used when the value returned by + * jpeg_mem_available is less than the total space needed. You can dispense + * with these routines if you have plenty of virtual memory; see jmemnobs.c. + */ + +/* + * For MS-DOS we support three types of backing storage: + * 1. Conventional DOS files. We access these by direct DOS calls rather + * than via the stdio package. This provides a bit better performance, + * but the real reason is that the buffers to be read or written are FAR. + * The stdio library for small-data memory models can't cope with that. + * 2. Extended memory, accessed per the XMS V2.0 specification. + * 3. Expanded memory, accessed per the LIM/EMS 4.0 specification. + * You'll need copies of those specs to make sense of the related code. + * The specs are available by Internet FTP from the SIMTEL archives + * (oak.oakland.edu and its various mirror sites). See files + * pub/msdos/microsoft/xms20.arc and pub/msdos/info/limems41.zip. + */ + + +/* + * Access methods for a DOS file. + */ + + +METHODDEF(void) +read_file_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + if (jdos_seek(info->handle.file_handle, file_offset)) + ERREXIT(cinfo, JERR_TFILE_SEEK); + /* Since MAX_ALLOC_CHUNK is less than 64K, byte_count will be too. */ + if (byte_count > 65535L) /* safety check */ + ERREXIT(cinfo, JERR_BAD_ALLOC_CHUNK); + if (jdos_read(info->handle.file_handle, buffer_address, + (unsigned short) byte_count)) + ERREXIT(cinfo, JERR_TFILE_READ); +} + + +METHODDEF(void) +write_file_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + if (jdos_seek(info->handle.file_handle, file_offset)) + ERREXIT(cinfo, JERR_TFILE_SEEK); + /* Since MAX_ALLOC_CHUNK is less than 64K, byte_count will be too. */ + if (byte_count > 65535L) /* safety check */ + ERREXIT(cinfo, JERR_BAD_ALLOC_CHUNK); + if (jdos_write(info->handle.file_handle, buffer_address, + (unsigned short) byte_count)) + ERREXIT(cinfo, JERR_TFILE_WRITE); +} + + +METHODDEF(void) +close_file_store (j_common_ptr cinfo, backing_store_ptr info) +{ + jdos_close(info->handle.file_handle); /* close the file */ + remove(info->temp_name); /* delete the file */ +/* If your system doesn't have remove(), try unlink() instead. + * remove() is the ANSI-standard name for this function, but + * unlink() was more common in pre-ANSI systems. + */ + TRACEMSS(cinfo, 1, JTRC_TFILE_CLOSE, info->temp_name); +} + + +LOCAL(boolean) +open_file_store (j_common_ptr cinfo, backing_store_ptr info, + long total_bytes_needed) +{ + short handle; + + select_file_name(info->temp_name); + if (jdos_open((short far *) & handle, (char far *) info->temp_name)) { + /* might as well exit since jpeg_open_backing_store will fail anyway */ + ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name); + return FALSE; + } + info->handle.file_handle = handle; + info->read_backing_store = read_file_store; + info->write_backing_store = write_file_store; + info->close_backing_store = close_file_store; + TRACEMSS(cinfo, 1, JTRC_TFILE_OPEN, info->temp_name); + return TRUE; /* succeeded */ +} + + +/* + * Access methods for extended memory. + */ + +#if XMS_SUPPORTED + +static XMSDRIVER xms_driver; /* saved address of XMS driver */ + +typedef union { /* either long offset or real-mode pointer */ + long offset; + void far * ptr; + } XMSPTR; + +typedef struct { /* XMS move specification structure */ + long length; + XMSH src_handle; + XMSPTR src; + XMSH dst_handle; + XMSPTR dst; + } XMSspec; + +#define ODD(X) (((X) & 1L) != 0) + + +METHODDEF(void) +read_xms_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + XMScontext ctx; + XMSspec spec; + char endbuffer[2]; + + /* The XMS driver can't cope with an odd length, so handle the last byte + * specially if byte_count is odd. We don't expect this to be common. + */ + + spec.length = byte_count & (~ 1L); + spec.src_handle = info->handle.xms_handle; + spec.src.offset = file_offset; + spec.dst_handle = 0; + spec.dst.ptr = buffer_address; + + ctx.ds_si = (void far *) & spec; + ctx.ax = 0x0b00; /* EMB move */ + jxms_calldriver(xms_driver, (XMScontext far *) & ctx); + if (ctx.ax != 1) + ERREXIT(cinfo, JERR_XMS_READ); + + if (ODD(byte_count)) { + read_xms_store(cinfo, info, (void FAR *) endbuffer, + file_offset + byte_count - 1L, 2L); + ((char FAR *) buffer_address)[byte_count - 1L] = endbuffer[0]; + } +} + + +METHODDEF(void) +write_xms_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + XMScontext ctx; + XMSspec spec; + char endbuffer[2]; + + /* The XMS driver can't cope with an odd length, so handle the last byte + * specially if byte_count is odd. We don't expect this to be common. + */ + + spec.length = byte_count & (~ 1L); + spec.src_handle = 0; + spec.src.ptr = buffer_address; + spec.dst_handle = info->handle.xms_handle; + spec.dst.offset = file_offset; + + ctx.ds_si = (void far *) & spec; + ctx.ax = 0x0b00; /* EMB move */ + jxms_calldriver(xms_driver, (XMScontext far *) & ctx); + if (ctx.ax != 1) + ERREXIT(cinfo, JERR_XMS_WRITE); + + if (ODD(byte_count)) { + read_xms_store(cinfo, info, (void FAR *) endbuffer, + file_offset + byte_count - 1L, 2L); + endbuffer[0] = ((char FAR *) buffer_address)[byte_count - 1L]; + write_xms_store(cinfo, info, (void FAR *) endbuffer, + file_offset + byte_count - 1L, 2L); + } +} + + +METHODDEF(void) +close_xms_store (j_common_ptr cinfo, backing_store_ptr info) +{ + XMScontext ctx; + + ctx.dx = info->handle.xms_handle; + ctx.ax = 0x0a00; + jxms_calldriver(xms_driver, (XMScontext far *) & ctx); + TRACEMS1(cinfo, 1, JTRC_XMS_CLOSE, info->handle.xms_handle); + /* we ignore any error return from the driver */ +} + + +LOCAL(boolean) +open_xms_store (j_common_ptr cinfo, backing_store_ptr info, + long total_bytes_needed) +{ + XMScontext ctx; + + /* Get address of XMS driver */ + jxms_getdriver((XMSDRIVER far *) & xms_driver); + if (xms_driver == NULL) + return FALSE; /* no driver to be had */ + + /* Get version number, must be >= 2.00 */ + ctx.ax = 0x0000; + jxms_calldriver(xms_driver, (XMScontext far *) & ctx); + if (ctx.ax < (unsigned short) 0x0200) + return FALSE; + + /* Try to get space (expressed in kilobytes) */ + ctx.dx = (unsigned short) ((total_bytes_needed + 1023L) >> 10); + ctx.ax = 0x0900; + jxms_calldriver(xms_driver, (XMScontext far *) & ctx); + if (ctx.ax != 1) + return FALSE; + + /* Succeeded, save the handle and away we go */ + info->handle.xms_handle = ctx.dx; + info->read_backing_store = read_xms_store; + info->write_backing_store = write_xms_store; + info->close_backing_store = close_xms_store; + TRACEMS1(cinfo, 1, JTRC_XMS_OPEN, ctx.dx); + return TRUE; /* succeeded */ +} + +#endif /* XMS_SUPPORTED */ + + +/* + * Access methods for expanded memory. + */ + +#if EMS_SUPPORTED + +/* The EMS move specification structure requires word and long fields aligned + * at odd byte boundaries. Some compilers will align struct fields at even + * byte boundaries. While it's usually possible to force byte alignment, + * that causes an overall performance penalty and may pose problems in merging + * JPEG into a larger application. Instead we accept some rather dirty code + * here. Note this code would fail if the hardware did not allow odd-byte + * word & long accesses, but all 80x86 CPUs do. + */ + +typedef void far * EMSPTR; + +typedef union { /* EMS move specification structure */ + long length; /* It's easy to access first 4 bytes */ + char bytes[18]; /* Misaligned fields in here! */ + } EMSspec; + +/* Macros for accessing misaligned fields */ +#define FIELD_AT(spec,offset,type) (*((type *) &(spec.bytes[offset]))) +#define SRC_TYPE(spec) FIELD_AT(spec,4,char) +#define SRC_HANDLE(spec) FIELD_AT(spec,5,EMSH) +#define SRC_OFFSET(spec) FIELD_AT(spec,7,unsigned short) +#define SRC_PAGE(spec) FIELD_AT(spec,9,unsigned short) +#define SRC_PTR(spec) FIELD_AT(spec,7,EMSPTR) +#define DST_TYPE(spec) FIELD_AT(spec,11,char) +#define DST_HANDLE(spec) FIELD_AT(spec,12,EMSH) +#define DST_OFFSET(spec) FIELD_AT(spec,14,unsigned short) +#define DST_PAGE(spec) FIELD_AT(spec,16,unsigned short) +#define DST_PTR(spec) FIELD_AT(spec,14,EMSPTR) + +#define EMSPAGESIZE 16384L /* gospel, see the EMS specs */ + +#define HIBYTE(W) (((W) >> 8) & 0xFF) +#define LOBYTE(W) ((W) & 0xFF) + + +METHODDEF(void) +read_ems_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + EMScontext ctx; + EMSspec spec; + + spec.length = byte_count; + SRC_TYPE(spec) = 1; + SRC_HANDLE(spec) = info->handle.ems_handle; + SRC_PAGE(spec) = (unsigned short) (file_offset / EMSPAGESIZE); + SRC_OFFSET(spec) = (unsigned short) (file_offset % EMSPAGESIZE); + DST_TYPE(spec) = 0; + DST_HANDLE(spec) = 0; + DST_PTR(spec) = buffer_address; + + ctx.ds_si = (void far *) & spec; + ctx.ax = 0x5700; /* move memory region */ + jems_calldriver((EMScontext far *) & ctx); + if (HIBYTE(ctx.ax) != 0) + ERREXIT(cinfo, JERR_EMS_READ); +} + + +METHODDEF(void) +write_ems_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + EMScontext ctx; + EMSspec spec; + + spec.length = byte_count; + SRC_TYPE(spec) = 0; + SRC_HANDLE(spec) = 0; + SRC_PTR(spec) = buffer_address; + DST_TYPE(spec) = 1; + DST_HANDLE(spec) = info->handle.ems_handle; + DST_PAGE(spec) = (unsigned short) (file_offset / EMSPAGESIZE); + DST_OFFSET(spec) = (unsigned short) (file_offset % EMSPAGESIZE); + + ctx.ds_si = (void far *) & spec; + ctx.ax = 0x5700; /* move memory region */ + jems_calldriver((EMScontext far *) & ctx); + if (HIBYTE(ctx.ax) != 0) + ERREXIT(cinfo, JERR_EMS_WRITE); +} + + +METHODDEF(void) +close_ems_store (j_common_ptr cinfo, backing_store_ptr info) +{ + EMScontext ctx; + + ctx.ax = 0x4500; + ctx.dx = info->handle.ems_handle; + jems_calldriver((EMScontext far *) & ctx); + TRACEMS1(cinfo, 1, JTRC_EMS_CLOSE, info->handle.ems_handle); + /* we ignore any error return from the driver */ +} + + +LOCAL(boolean) +open_ems_store (j_common_ptr cinfo, backing_store_ptr info, + long total_bytes_needed) +{ + EMScontext ctx; + + /* Is EMS driver there? */ + if (! jems_available()) + return FALSE; + + /* Get status, make sure EMS is OK */ + ctx.ax = 0x4000; + jems_calldriver((EMScontext far *) & ctx); + if (HIBYTE(ctx.ax) != 0) + return FALSE; + + /* Get version, must be >= 4.0 */ + ctx.ax = 0x4600; + jems_calldriver((EMScontext far *) & ctx); + if (HIBYTE(ctx.ax) != 0 || LOBYTE(ctx.ax) < 0x40) + return FALSE; + + /* Try to allocate requested space */ + ctx.ax = 0x4300; + ctx.bx = (unsigned short) ((total_bytes_needed + EMSPAGESIZE-1L) / EMSPAGESIZE); + jems_calldriver((EMScontext far *) & ctx); + if (HIBYTE(ctx.ax) != 0) + return FALSE; + + /* Succeeded, save the handle and away we go */ + info->handle.ems_handle = ctx.dx; + info->read_backing_store = read_ems_store; + info->write_backing_store = write_ems_store; + info->close_backing_store = close_ems_store; + TRACEMS1(cinfo, 1, JTRC_EMS_OPEN, ctx.dx); + return TRUE; /* succeeded */ +} + +#endif /* EMS_SUPPORTED */ + + +/* + * Initial opening of a backing-store object. + */ + +GLOBAL(void) +jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info, + long total_bytes_needed) +{ + /* Try extended memory, then expanded memory, then regular file. */ +#if XMS_SUPPORTED + if (open_xms_store(cinfo, info, total_bytes_needed)) + return; +#endif +#if EMS_SUPPORTED + if (open_ems_store(cinfo, info, total_bytes_needed)) + return; +#endif + if (open_file_store(cinfo, info, total_bytes_needed)) + return; + ERREXITS(cinfo, JERR_TFILE_CREATE, ""); +} + + +/* + * These routines take care of any system-dependent initialization and + * cleanup required. + */ + +GLOBAL(long) +jpeg_mem_init (j_common_ptr cinfo) +{ + next_file_num = 0; /* initialize temp file name generator */ + return DEFAULT_MAX_MEM; /* default for max_memory_to_use */ +} + +GLOBAL(void) +jpeg_mem_term (j_common_ptr cinfo) +{ + /* Microsoft C, at least in v6.00A, will not successfully reclaim freed + * blocks of size > 32Kbytes unless we give it a kick in the rear, like so: + */ +#ifdef NEED_FHEAPMIN + _fheapmin(); +#endif +} diff --git a/compat/libjpeg/jmemdosa.asm b/compat/libjpeg/jmemdosa.asm new file mode 100755 index 0000000..c6ec48b --- /dev/null +++ b/compat/libjpeg/jmemdosa.asm @@ -0,0 +1,379 @@ +; +; jmemdosa.asm +; +; Copyright (C) 1992, Thomas G. Lane. +; This file is part of the Independent JPEG Group's software. +; For conditions of distribution and use, see the accompanying README file. +; +; This file contains low-level interface routines to support the MS-DOS +; backing store manager (jmemdos.c). Routines are provided to access disk +; files through direct DOS calls, and to access XMS and EMS drivers. +; +; This file should assemble with Microsoft's MASM or any compatible +; assembler (including Borland's Turbo Assembler). If you haven't got +; a compatible assembler, better fall back to jmemansi.c or jmemname.c. +; +; To minimize dependence on the C compiler's register usage conventions, +; we save and restore all 8086 registers, even though most compilers only +; require SI,DI,DS to be preserved. Also, we use only 16-bit-wide return +; values, which everybody returns in AX. +; +; Based on code contributed by Ge' Weijers. +; + +JMEMDOSA_TXT segment byte public 'CODE' + + assume cs:JMEMDOSA_TXT + + public _jdos_open + public _jdos_close + public _jdos_seek + public _jdos_read + public _jdos_write + public _jxms_getdriver + public _jxms_calldriver + public _jems_available + public _jems_calldriver + +; +; short far jdos_open (short far * handle, char far * filename) +; +; Create and open a temporary file +; +_jdos_open proc far + push bp ; linkage + mov bp,sp + push si ; save all registers for safety + push di + push bx + push cx + push dx + push es + push ds + mov cx,0 ; normal file attributes + lds dx,dword ptr [bp+10] ; get filename pointer + mov ah,3ch ; create file + int 21h + jc open_err ; if failed, return error code + lds bx,dword ptr [bp+6] ; get handle pointer + mov word ptr [bx],ax ; save the handle + xor ax,ax ; return zero for OK +open_err: pop ds ; restore registers and exit + pop es + pop dx + pop cx + pop bx + pop di + pop si + pop bp + ret +_jdos_open endp + + +; +; short far jdos_close (short handle) +; +; Close the file handle +; +_jdos_close proc far + push bp ; linkage + mov bp,sp + push si ; save all registers for safety + push di + push bx + push cx + push dx + push es + push ds + mov bx,word ptr [bp+6] ; file handle + mov ah,3eh ; close file + int 21h + jc close_err ; if failed, return error code + xor ax,ax ; return zero for OK +close_err: pop ds ; restore registers and exit + pop es + pop dx + pop cx + pop bx + pop di + pop si + pop bp + ret +_jdos_close endp + + +; +; short far jdos_seek (short handle, long offset) +; +; Set file position +; +_jdos_seek proc far + push bp ; linkage + mov bp,sp + push si ; save all registers for safety + push di + push bx + push cx + push dx + push es + push ds + mov bx,word ptr [bp+6] ; file handle + mov dx,word ptr [bp+8] ; LS offset + mov cx,word ptr [bp+10] ; MS offset + mov ax,4200h ; absolute seek + int 21h + jc seek_err ; if failed, return error code + xor ax,ax ; return zero for OK +seek_err: pop ds ; restore registers and exit + pop es + pop dx + pop cx + pop bx + pop di + pop si + pop bp + ret +_jdos_seek endp + + +; +; short far jdos_read (short handle, void far * buffer, unsigned short count) +; +; Read from file +; +_jdos_read proc far + push bp ; linkage + mov bp,sp + push si ; save all registers for safety + push di + push bx + push cx + push dx + push es + push ds + mov bx,word ptr [bp+6] ; file handle + lds dx,dword ptr [bp+8] ; buffer address + mov cx,word ptr [bp+12] ; number of bytes + mov ah,3fh ; read file + int 21h + jc read_err ; if failed, return error code + cmp ax,word ptr [bp+12] ; make sure all bytes were read + je read_ok + mov ax,1 ; else return 1 for not OK + jmp short read_err +read_ok: xor ax,ax ; return zero for OK +read_err: pop ds ; restore registers and exit + pop es + pop dx + pop cx + pop bx + pop di + pop si + pop bp + ret +_jdos_read endp + + +; +; short far jdos_write (short handle, void far * buffer, unsigned short count) +; +; Write to file +; +_jdos_write proc far + push bp ; linkage + mov bp,sp + push si ; save all registers for safety + push di + push bx + push cx + push dx + push es + push ds + mov bx,word ptr [bp+6] ; file handle + lds dx,dword ptr [bp+8] ; buffer address + mov cx,word ptr [bp+12] ; number of bytes + mov ah,40h ; write file + int 21h + jc write_err ; if failed, return error code + cmp ax,word ptr [bp+12] ; make sure all bytes written + je write_ok + mov ax,1 ; else return 1 for not OK + jmp short write_err +write_ok: xor ax,ax ; return zero for OK +write_err: pop ds ; restore registers and exit + pop es + pop dx + pop cx + pop bx + pop di + pop si + pop bp + ret +_jdos_write endp + + +; +; void far jxms_getdriver (XMSDRIVER far *) +; +; Get the address of the XMS driver, or NULL if not available +; +_jxms_getdriver proc far + push bp ; linkage + mov bp,sp + push si ; save all registers for safety + push di + push bx + push cx + push dx + push es + push ds + mov ax,4300h ; call multiplex interrupt with + int 2fh ; a magic cookie, hex 4300 + cmp al,80h ; AL should contain hex 80 + je xmsavail + xor dx,dx ; no XMS driver available + xor ax,ax ; return a nil pointer + jmp short xmsavail_done +xmsavail: mov ax,4310h ; fetch driver address with + int 2fh ; another magic cookie + mov dx,es ; copy address to dx:ax + mov ax,bx +xmsavail_done: les bx,dword ptr [bp+6] ; get pointer to return value + mov word ptr es:[bx],ax + mov word ptr es:[bx+2],dx + pop ds ; restore registers and exit + pop es + pop dx + pop cx + pop bx + pop di + pop si + pop bp + ret +_jxms_getdriver endp + + +; +; void far jxms_calldriver (XMSDRIVER, XMScontext far *) +; +; The XMScontext structure contains values for the AX,DX,BX,SI,DS registers. +; These are loaded, the XMS call is performed, and the new values of the +; AX,DX,BX registers are written back to the context structure. +; +_jxms_calldriver proc far + push bp ; linkage + mov bp,sp + push si ; save all registers for safety + push di + push bx + push cx + push dx + push es + push ds + les bx,dword ptr [bp+10] ; get XMScontext pointer + mov ax,word ptr es:[bx] ; load registers + mov dx,word ptr es:[bx+2] + mov si,word ptr es:[bx+6] + mov ds,word ptr es:[bx+8] + mov bx,word ptr es:[bx+4] + call dword ptr [bp+6] ; call the driver + mov cx,bx ; save returned BX for a sec + les bx,dword ptr [bp+10] ; get XMScontext pointer + mov word ptr es:[bx],ax ; put back ax,dx,bx + mov word ptr es:[bx+2],dx + mov word ptr es:[bx+4],cx + pop ds ; restore registers and exit + pop es + pop dx + pop cx + pop bx + pop di + pop si + pop bp + ret +_jxms_calldriver endp + + +; +; short far jems_available (void) +; +; Have we got an EMS driver? (this comes straight from the EMS 4.0 specs) +; +_jems_available proc far + push si ; save all registers for safety + push di + push bx + push cx + push dx + push es + push ds + mov ax,3567h ; get interrupt vector 67h + int 21h + push cs + pop ds + mov di,000ah ; check offs 10 in returned seg + lea si,ASCII_device_name ; against literal string + mov cx,8 + cld + repe cmpsb + jne no_ems + mov ax,1 ; match, it's there + jmp short avail_done +no_ems: xor ax,ax ; it's not there +avail_done: pop ds ; restore registers and exit + pop es + pop dx + pop cx + pop bx + pop di + pop si + ret + +ASCII_device_name db "EMMXXXX0" + +_jems_available endp + + +; +; void far jems_calldriver (EMScontext far *) +; +; The EMScontext structure contains values for the AX,DX,BX,SI,DS registers. +; These are loaded, the EMS trap is performed, and the new values of the +; AX,DX,BX registers are written back to the context structure. +; +_jems_calldriver proc far + push bp ; linkage + mov bp,sp + push si ; save all registers for safety + push di + push bx + push cx + push dx + push es + push ds + les bx,dword ptr [bp+6] ; get EMScontext pointer + mov ax,word ptr es:[bx] ; load registers + mov dx,word ptr es:[bx+2] + mov si,word ptr es:[bx+6] + mov ds,word ptr es:[bx+8] + mov bx,word ptr es:[bx+4] + int 67h ; call the EMS driver + mov cx,bx ; save returned BX for a sec + les bx,dword ptr [bp+6] ; get EMScontext pointer + mov word ptr es:[bx],ax ; put back ax,dx,bx + mov word ptr es:[bx+2],dx + mov word ptr es:[bx+4],cx + pop ds ; restore registers and exit + pop es + pop dx + pop cx + pop bx + pop di + pop si + pop bp + ret +_jems_calldriver endp + +JMEMDOSA_TXT ends + + end diff --git a/compat/libjpeg/jmemmac.c b/compat/libjpeg/jmemmac.c new file mode 100755 index 0000000..a6f043e --- /dev/null +++ b/compat/libjpeg/jmemmac.c @@ -0,0 +1,289 @@ +/* + * jmemmac.c + * + * Copyright (C) 1992-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * jmemmac.c provides an Apple Macintosh implementation of the system- + * dependent portion of the JPEG memory manager. + * + * If you use jmemmac.c, then you must define USE_MAC_MEMMGR in the + * JPEG_INTERNALS part of jconfig.h. + * + * jmemmac.c uses the Macintosh toolbox routines NewPtr and DisposePtr + * instead of malloc and free. It accurately determines the amount of + * memory available by using CompactMem. Notice that if left to its + * own devices, this code can chew up all available space in the + * application's zone, with the exception of the rather small "slop" + * factor computed in jpeg_mem_available(). The application can ensure + * that more space is left over by reducing max_memory_to_use. + * + * Large images are swapped to disk using temporary files and System 7.0+'s + * temporary folder functionality. + * + * Note that jmemmac.c depends on two features of MacOS that were first + * introduced in System 7: FindFolder and the FSSpec-based calls. + * If your application uses jmemmac.c and is run under System 6 or earlier, + * and the jpeg library decides it needs a temporary file, it will abort, + * printing error messages about requiring System 7. (If no temporary files + * are created, it will run fine.) + * + * If you want to use jmemmac.c in an application that might be used with + * System 6 or earlier, then you should remove dependencies on FindFolder + * and the FSSpec calls. You will need to replace FindFolder with some + * other mechanism for finding a place to put temporary files, and you + * should replace the FSSpec calls with their HFS equivalents: + * + * FSpDelete -> HDelete + * FSpGetFInfo -> HGetFInfo + * FSpCreate -> HCreate + * FSpOpenDF -> HOpen *** Note: not HOpenDF *** + * FSMakeFSSpec -> (fill in spec by hand.) + * + * (Use HOpen instead of HOpenDF. HOpen is just a glue-interface to PBHOpen, + * which is on all HFS macs. HOpenDF is a System 7 addition which avoids the + * ages-old problem of names starting with a period.) + * + * Contributed by Sam Bushell (jsam@iagu.on.net) and + * Dan Gildor (gyld@in-touch.com). + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jmemsys.h" /* import the system-dependent declarations */ + +#ifndef USE_MAC_MEMMGR /* make sure user got configuration right */ + You forgot to define USE_MAC_MEMMGR in jconfig.h. /* deliberate syntax error */ +#endif + +#include /* we use the MacOS memory manager */ +#include /* we use the MacOS File stuff */ +#include /* we use the MacOS HFS stuff */ +#include /* for smSystemScript */ +#include /* we use Gestalt to test for specific functionality */ + +#ifndef TEMP_FILE_NAME /* can override from jconfig.h or Makefile */ +#define TEMP_FILE_NAME "JPG%03d.TMP" +#endif + +static int next_file_num; /* to distinguish among several temp files */ + + +/* + * Memory allocation and freeing are controlled by the MacOS library + * routines NewPtr() and DisposePtr(), which allocate fixed-address + * storage. Unfortunately, the IJG library isn't smart enough to cope + * with relocatable storage. + */ + +GLOBAL(void *) +jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject) +{ + return (void *) NewPtr(sizeofobject); +} + +GLOBAL(void) +jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject) +{ + DisposePtr((Ptr) object); +} + + +/* + * "Large" objects are treated the same as "small" ones. + * NB: we include FAR keywords in the routine declarations simply for + * consistency with the rest of the IJG code; FAR should expand to empty + * on rational architectures like the Mac. + */ + +GLOBAL(void FAR *) +jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject) +{ + return (void FAR *) NewPtr(sizeofobject); +} + +GLOBAL(void) +jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject) +{ + DisposePtr((Ptr) object); +} + + +/* + * This routine computes the total memory space available for allocation. + */ + +GLOBAL(long) +jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed, + long max_bytes_needed, long already_allocated) +{ + long limit = cinfo->mem->max_memory_to_use - already_allocated; + long slop, mem; + + /* Don't ask for more than what application has told us we may use */ + if (max_bytes_needed > limit && limit > 0) + max_bytes_needed = limit; + /* Find whether there's a big enough free block in the heap. + * CompactMem tries to create a contiguous block of the requested size, + * and then returns the size of the largest free block (which could be + * much more or much less than we asked for). + * We add some slop to ensure we don't use up all available memory. + */ + slop = max_bytes_needed / 16 + 32768L; + mem = CompactMem(max_bytes_needed + slop) - slop; + if (mem < 0) + mem = 0; /* sigh, couldn't even get the slop */ + /* Don't take more than the application says we can have */ + if (mem > limit && limit > 0) + mem = limit; + return mem; +} + + +/* + * Backing store (temporary file) management. + * Backing store objects are only used when the value returned by + * jpeg_mem_available is less than the total space needed. You can dispense + * with these routines if you have plenty of virtual memory; see jmemnobs.c. + */ + + +METHODDEF(void) +read_backing_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + long bytes = byte_count; + long retVal; + + if ( SetFPos ( info->temp_file, fsFromStart, file_offset ) != noErr ) + ERREXIT(cinfo, JERR_TFILE_SEEK); + + retVal = FSRead ( info->temp_file, &bytes, + (unsigned char *) buffer_address ); + if ( retVal != noErr || bytes != byte_count ) + ERREXIT(cinfo, JERR_TFILE_READ); +} + + +METHODDEF(void) +write_backing_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + long bytes = byte_count; + long retVal; + + if ( SetFPos ( info->temp_file, fsFromStart, file_offset ) != noErr ) + ERREXIT(cinfo, JERR_TFILE_SEEK); + + retVal = FSWrite ( info->temp_file, &bytes, + (unsigned char *) buffer_address ); + if ( retVal != noErr || bytes != byte_count ) + ERREXIT(cinfo, JERR_TFILE_WRITE); +} + + +METHODDEF(void) +close_backing_store (j_common_ptr cinfo, backing_store_ptr info) +{ + FSClose ( info->temp_file ); + FSpDelete ( &(info->tempSpec) ); +} + + +/* + * Initial opening of a backing-store object. + * + * This version uses FindFolder to find the Temporary Items folder, + * and puts the temporary file in there. + */ + +GLOBAL(void) +jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info, + long total_bytes_needed) +{ + short tmpRef, vRefNum; + long dirID; + FInfo finderInfo; + FSSpec theSpec; + Str255 fName; + OSErr osErr; + long gestaltResponse = 0; + + /* Check that FSSpec calls are available. */ + osErr = Gestalt( gestaltFSAttr, &gestaltResponse ); + if ( ( osErr != noErr ) + || !( gestaltResponse & (1<temp_name, TEMP_FILE_NAME, next_file_num); + strcpy ( (Ptr)fName+1, info->temp_name ); + *fName = strlen (info->temp_name); + osErr = FSMakeFSSpec ( vRefNum, dirID, fName, &theSpec ); + + if ( (osErr = FSpGetFInfo ( &theSpec, &finderInfo ) ) != noErr ) + break; + } + + osErr = FSpCreate ( &theSpec, '????', '????', smSystemScript ); + if ( osErr != noErr ) + ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name); + + osErr = FSpOpenDF ( &theSpec, fsRdWrPerm, &(info->temp_file) ); + if ( osErr != noErr ) + ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name); + + info->tempSpec = theSpec; + + info->read_backing_store = read_backing_store; + info->write_backing_store = write_backing_store; + info->close_backing_store = close_backing_store; + TRACEMSS(cinfo, 1, JTRC_TFILE_OPEN, info->temp_name); +} + + +/* + * These routines take care of any system-dependent initialization and + * cleanup required. + */ + +GLOBAL(long) +jpeg_mem_init (j_common_ptr cinfo) +{ + next_file_num = 0; + + /* max_memory_to_use will be initialized to FreeMem()'s result; + * the calling application might later reduce it, for example + * to leave room to invoke multiple JPEG objects. + * Note that FreeMem returns the total number of free bytes; + * it may not be possible to allocate a single block of this size. + */ + return FreeMem(); +} + +GLOBAL(void) +jpeg_mem_term (j_common_ptr cinfo) +{ + /* no work */ +} diff --git a/compat/libjpeg/jmemmgr.c b/compat/libjpeg/jmemmgr.c new file mode 100755 index 0000000..ea93420 --- /dev/null +++ b/compat/libjpeg/jmemmgr.c @@ -0,0 +1,1119 @@ +/* + * jmemmgr.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 2011-2012 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the JPEG system-independent memory management + * routines. This code is usable across a wide variety of machines; most + * of the system dependencies have been isolated in a separate file. + * The major functions provided here are: + * * pool-based allocation and freeing of memory; + * * policy decisions about how to divide available memory among the + * virtual arrays; + * * control logic for swapping virtual arrays between main memory and + * backing storage. + * The separate system-dependent file provides the actual backing-storage + * access code, and it contains the policy decision about how much total + * main memory to use. + * This file is system-dependent in the sense that some of its functions + * are unnecessary in some systems. For example, if there is enough virtual + * memory so that backing storage will never be used, much of the virtual + * array control logic could be removed. (Of course, if you have that much + * memory then you shouldn't care about a little bit of unused code...) + */ + +#define JPEG_INTERNALS +#define AM_MEMORY_MANAGER /* we define jvirt_Xarray_control structs */ +#include "jinclude.h" +#include "jpeglib.h" +#include "jmemsys.h" /* import the system-dependent declarations */ + +#ifndef NO_GETENV +#ifndef HAVE_STDLIB_H /* should declare getenv() */ +extern char * getenv JPP((const char * name)); +#endif +#endif + + +/* + * Some important notes: + * The allocation routines provided here must never return NULL. + * They should exit to error_exit if unsuccessful. + * + * It's not a good idea to try to merge the sarray and barray routines, + * even though they are textually almost the same, because samples are + * usually stored as bytes while coefficients are shorts or ints. Thus, + * in machines where byte pointers have a different representation from + * word pointers, the resulting machine code could not be the same. + */ + + +/* + * Many machines require storage alignment: longs must start on 4-byte + * boundaries, doubles on 8-byte boundaries, etc. On such machines, malloc() + * always returns pointers that are multiples of the worst-case alignment + * requirement, and we had better do so too. + * There isn't any really portable way to determine the worst-case alignment + * requirement. This module assumes that the alignment requirement is + * multiples of sizeof(ALIGN_TYPE). + * By default, we define ALIGN_TYPE as double. This is necessary on some + * workstations (where doubles really do need 8-byte alignment) and will work + * fine on nearly everything. If your machine has lesser alignment needs, + * you can save a few bytes by making ALIGN_TYPE smaller. + * The only place I know of where this will NOT work is certain Macintosh + * 680x0 compilers that define double as a 10-byte IEEE extended float. + * Doing 10-byte alignment is counterproductive because longwords won't be + * aligned well. Put "#define ALIGN_TYPE long" in jconfig.h if you have + * such a compiler. + */ + +#ifndef ALIGN_TYPE /* so can override from jconfig.h */ +#define ALIGN_TYPE double +#endif + + +/* + * We allocate objects from "pools", where each pool is gotten with a single + * request to jpeg_get_small() or jpeg_get_large(). There is no per-object + * overhead within a pool, except for alignment padding. Each pool has a + * header with a link to the next pool of the same class. + * Small and large pool headers are identical except that the latter's + * link pointer must be FAR on 80x86 machines. + * Notice that the "real" header fields are union'ed with a dummy ALIGN_TYPE + * field. This forces the compiler to make SIZEOF(small_pool_hdr) a multiple + * of the alignment requirement of ALIGN_TYPE. + */ + +typedef union small_pool_struct * small_pool_ptr; + +typedef union small_pool_struct { + struct { + small_pool_ptr next; /* next in list of pools */ + size_t bytes_used; /* how many bytes already used within pool */ + size_t bytes_left; /* bytes still available in this pool */ + } hdr; + ALIGN_TYPE dummy; /* included in union to ensure alignment */ +} small_pool_hdr; + +typedef union large_pool_struct FAR * large_pool_ptr; + +typedef union large_pool_struct { + struct { + large_pool_ptr next; /* next in list of pools */ + size_t bytes_used; /* how many bytes already used within pool */ + size_t bytes_left; /* bytes still available in this pool */ + } hdr; + ALIGN_TYPE dummy; /* included in union to ensure alignment */ +} large_pool_hdr; + + +/* + * Here is the full definition of a memory manager object. + */ + +typedef struct { + struct jpeg_memory_mgr pub; /* public fields */ + + /* Each pool identifier (lifetime class) names a linked list of pools. */ + small_pool_ptr small_list[JPOOL_NUMPOOLS]; + large_pool_ptr large_list[JPOOL_NUMPOOLS]; + + /* Since we only have one lifetime class of virtual arrays, only one + * linked list is necessary (for each datatype). Note that the virtual + * array control blocks being linked together are actually stored somewhere + * in the small-pool list. + */ + jvirt_sarray_ptr virt_sarray_list; + jvirt_barray_ptr virt_barray_list; + + /* This counts total space obtained from jpeg_get_small/large */ + long total_space_allocated; + + /* alloc_sarray and alloc_barray set this value for use by virtual + * array routines. + */ + JDIMENSION last_rowsperchunk; /* from most recent alloc_sarray/barray */ +} my_memory_mgr; + +typedef my_memory_mgr * my_mem_ptr; + + +/* + * The control blocks for virtual arrays. + * Note that these blocks are allocated in the "small" pool area. + * System-dependent info for the associated backing store (if any) is hidden + * inside the backing_store_info struct. + */ + +struct jvirt_sarray_control { + JSAMPARRAY mem_buffer; /* => the in-memory buffer */ + JDIMENSION rows_in_array; /* total virtual array height */ + JDIMENSION samplesperrow; /* width of array (and of memory buffer) */ + JDIMENSION maxaccess; /* max rows accessed by access_virt_sarray */ + JDIMENSION rows_in_mem; /* height of memory buffer */ + JDIMENSION rowsperchunk; /* allocation chunk size in mem_buffer */ + JDIMENSION cur_start_row; /* first logical row # in the buffer */ + JDIMENSION first_undef_row; /* row # of first uninitialized row */ + boolean pre_zero; /* pre-zero mode requested? */ + boolean dirty; /* do current buffer contents need written? */ + boolean b_s_open; /* is backing-store data valid? */ + jvirt_sarray_ptr next; /* link to next virtual sarray control block */ + backing_store_info b_s_info; /* System-dependent control info */ +}; + +struct jvirt_barray_control { + JBLOCKARRAY mem_buffer; /* => the in-memory buffer */ + JDIMENSION rows_in_array; /* total virtual array height */ + JDIMENSION blocksperrow; /* width of array (and of memory buffer) */ + JDIMENSION maxaccess; /* max rows accessed by access_virt_barray */ + JDIMENSION rows_in_mem; /* height of memory buffer */ + JDIMENSION rowsperchunk; /* allocation chunk size in mem_buffer */ + JDIMENSION cur_start_row; /* first logical row # in the buffer */ + JDIMENSION first_undef_row; /* row # of first uninitialized row */ + boolean pre_zero; /* pre-zero mode requested? */ + boolean dirty; /* do current buffer contents need written? */ + boolean b_s_open; /* is backing-store data valid? */ + jvirt_barray_ptr next; /* link to next virtual barray control block */ + backing_store_info b_s_info; /* System-dependent control info */ +}; + + +#ifdef MEM_STATS /* optional extra stuff for statistics */ + +LOCAL(void) +print_mem_stats (j_common_ptr cinfo, int pool_id) +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + small_pool_ptr shdr_ptr; + large_pool_ptr lhdr_ptr; + + /* Since this is only a debugging stub, we can cheat a little by using + * fprintf directly rather than going through the trace message code. + * This is helpful because message parm array can't handle longs. + */ + fprintf(stderr, "Freeing pool %d, total space = %ld\n", + pool_id, mem->total_space_allocated); + + for (lhdr_ptr = mem->large_list[pool_id]; lhdr_ptr != NULL; + lhdr_ptr = lhdr_ptr->hdr.next) { + fprintf(stderr, " Large chunk used %ld\n", + (long) lhdr_ptr->hdr.bytes_used); + } + + for (shdr_ptr = mem->small_list[pool_id]; shdr_ptr != NULL; + shdr_ptr = shdr_ptr->hdr.next) { + fprintf(stderr, " Small chunk used %ld free %ld\n", + (long) shdr_ptr->hdr.bytes_used, + (long) shdr_ptr->hdr.bytes_left); + } +} + +#endif /* MEM_STATS */ + + +LOCAL(noreturn_t) +out_of_memory (j_common_ptr cinfo, int which) +/* Report an out-of-memory error and stop execution */ +/* If we compiled MEM_STATS support, report alloc requests before dying */ +{ +#ifdef MEM_STATS + cinfo->err->trace_level = 2; /* force self_destruct to report stats */ +#endif + ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, which); +} + + +/* + * Allocation of "small" objects. + * + * For these, we use pooled storage. When a new pool must be created, + * we try to get enough space for the current request plus a "slop" factor, + * where the slop will be the amount of leftover space in the new pool. + * The speed vs. space tradeoff is largely determined by the slop values. + * A different slop value is provided for each pool class (lifetime), + * and we also distinguish the first pool of a class from later ones. + * NOTE: the values given work fairly well on both 16- and 32-bit-int + * machines, but may be too small if longs are 64 bits or more. + */ + +static const size_t first_pool_slop[JPOOL_NUMPOOLS] = +{ + 1600, /* first PERMANENT pool */ + 16000 /* first IMAGE pool */ +}; + +static const size_t extra_pool_slop[JPOOL_NUMPOOLS] = +{ + 0, /* additional PERMANENT pools */ + 5000 /* additional IMAGE pools */ +}; + +#define MIN_SLOP 50 /* greater than 0 to avoid futile looping */ + + +METHODDEF(void *) +alloc_small (j_common_ptr cinfo, int pool_id, size_t sizeofobject) +/* Allocate a "small" object */ +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + small_pool_ptr hdr_ptr, prev_hdr_ptr; + char * data_ptr; + size_t odd_bytes, min_request, slop; + + /* Check for unsatisfiable request (do now to ensure no overflow below) */ + if (sizeofobject > (size_t) (MAX_ALLOC_CHUNK-SIZEOF(small_pool_hdr))) + out_of_memory(cinfo, 1); /* request exceeds malloc's ability */ + + /* Round up the requested size to a multiple of SIZEOF(ALIGN_TYPE) */ + odd_bytes = sizeofobject % SIZEOF(ALIGN_TYPE); + if (odd_bytes > 0) + sizeofobject += SIZEOF(ALIGN_TYPE) - odd_bytes; + + /* See if space is available in any existing pool */ + if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS) + ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ + prev_hdr_ptr = NULL; + hdr_ptr = mem->small_list[pool_id]; + while (hdr_ptr != NULL) { + if (hdr_ptr->hdr.bytes_left >= sizeofobject) + break; /* found pool with enough space */ + prev_hdr_ptr = hdr_ptr; + hdr_ptr = hdr_ptr->hdr.next; + } + + /* Time to make a new pool? */ + if (hdr_ptr == NULL) { + /* min_request is what we need now, slop is what will be leftover */ + min_request = sizeofobject + SIZEOF(small_pool_hdr); + if (prev_hdr_ptr == NULL) /* first pool in class? */ + slop = first_pool_slop[pool_id]; + else + slop = extra_pool_slop[pool_id]; + /* Don't ask for more than MAX_ALLOC_CHUNK */ + if (slop > (size_t) (MAX_ALLOC_CHUNK-min_request)) + slop = (size_t) (MAX_ALLOC_CHUNK-min_request); + /* Try to get space, if fail reduce slop and try again */ + for (;;) { + hdr_ptr = (small_pool_ptr) jpeg_get_small(cinfo, min_request + slop); + if (hdr_ptr != NULL) + break; + slop /= 2; + if (slop < MIN_SLOP) /* give up when it gets real small */ + out_of_memory(cinfo, 2); /* jpeg_get_small failed */ + } + mem->total_space_allocated += min_request + slop; + /* Success, initialize the new pool header and add to end of list */ + hdr_ptr->hdr.next = NULL; + hdr_ptr->hdr.bytes_used = 0; + hdr_ptr->hdr.bytes_left = sizeofobject + slop; + if (prev_hdr_ptr == NULL) /* first pool in class? */ + mem->small_list[pool_id] = hdr_ptr; + else + prev_hdr_ptr->hdr.next = hdr_ptr; + } + + /* OK, allocate the object from the current pool */ + data_ptr = (char *) (hdr_ptr + 1); /* point to first data byte in pool */ + data_ptr += hdr_ptr->hdr.bytes_used; /* point to place for object */ + hdr_ptr->hdr.bytes_used += sizeofobject; + hdr_ptr->hdr.bytes_left -= sizeofobject; + + return (void *) data_ptr; +} + + +/* + * Allocation of "large" objects. + * + * The external semantics of these are the same as "small" objects, + * except that FAR pointers are used on 80x86. However the pool + * management heuristics are quite different. We assume that each + * request is large enough that it may as well be passed directly to + * jpeg_get_large; the pool management just links everything together + * so that we can free it all on demand. + * Note: the major use of "large" objects is in JSAMPARRAY and JBLOCKARRAY + * structures. The routines that create these structures (see below) + * deliberately bunch rows together to ensure a large request size. + */ + +METHODDEF(void FAR *) +alloc_large (j_common_ptr cinfo, int pool_id, size_t sizeofobject) +/* Allocate a "large" object */ +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + large_pool_ptr hdr_ptr; + size_t odd_bytes; + + /* Check for unsatisfiable request (do now to ensure no overflow below) */ + if (sizeofobject > (size_t) (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr))) + out_of_memory(cinfo, 3); /* request exceeds malloc's ability */ + + /* Round up the requested size to a multiple of SIZEOF(ALIGN_TYPE) */ + odd_bytes = sizeofobject % SIZEOF(ALIGN_TYPE); + if (odd_bytes > 0) + sizeofobject += SIZEOF(ALIGN_TYPE) - odd_bytes; + + /* Always make a new pool */ + if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS) + ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ + + hdr_ptr = (large_pool_ptr) jpeg_get_large(cinfo, sizeofobject + + SIZEOF(large_pool_hdr)); + if (hdr_ptr == NULL) + out_of_memory(cinfo, 4); /* jpeg_get_large failed */ + mem->total_space_allocated += sizeofobject + SIZEOF(large_pool_hdr); + + /* Success, initialize the new pool header and add to list */ + hdr_ptr->hdr.next = mem->large_list[pool_id]; + /* We maintain space counts in each pool header for statistical purposes, + * even though they are not needed for allocation. + */ + hdr_ptr->hdr.bytes_used = sizeofobject; + hdr_ptr->hdr.bytes_left = 0; + mem->large_list[pool_id] = hdr_ptr; + + return (void FAR *) (hdr_ptr + 1); /* point to first data byte in pool */ +} + + +/* + * Creation of 2-D sample arrays. + * The pointers are in near heap, the samples themselves in FAR heap. + * + * To minimize allocation overhead and to allow I/O of large contiguous + * blocks, we allocate the sample rows in groups of as many rows as possible + * without exceeding MAX_ALLOC_CHUNK total bytes per allocation request. + * NB: the virtual array control routines, later in this file, know about + * this chunking of rows. The rowsperchunk value is left in the mem manager + * object so that it can be saved away if this sarray is the workspace for + * a virtual array. + */ + +METHODDEF(JSAMPARRAY) +alloc_sarray (j_common_ptr cinfo, int pool_id, + JDIMENSION samplesperrow, JDIMENSION numrows) +/* Allocate a 2-D sample array */ +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + JSAMPARRAY result; + JSAMPROW workspace; + JDIMENSION rowsperchunk, currow, i; + long ltemp; + + /* Calculate max # of rows allowed in one allocation chunk */ + ltemp = (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr)) / + ((long) samplesperrow * SIZEOF(JSAMPLE)); + if (ltemp <= 0) + ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); + if (ltemp < (long) numrows) + rowsperchunk = (JDIMENSION) ltemp; + else + rowsperchunk = numrows; + mem->last_rowsperchunk = rowsperchunk; + + /* Get space for row pointers (small object) */ + result = (JSAMPARRAY) alloc_small(cinfo, pool_id, + (size_t) (numrows * SIZEOF(JSAMPROW))); + + /* Get the rows themselves (large objects) */ + currow = 0; + while (currow < numrows) { + rowsperchunk = MIN(rowsperchunk, numrows - currow); + workspace = (JSAMPROW) alloc_large(cinfo, pool_id, + (size_t) ((size_t) rowsperchunk * (size_t) samplesperrow + * SIZEOF(JSAMPLE))); + for (i = rowsperchunk; i > 0; i--) { + result[currow++] = workspace; + workspace += samplesperrow; + } + } + + return result; +} + + +/* + * Creation of 2-D coefficient-block arrays. + * This is essentially the same as the code for sample arrays, above. + */ + +METHODDEF(JBLOCKARRAY) +alloc_barray (j_common_ptr cinfo, int pool_id, + JDIMENSION blocksperrow, JDIMENSION numrows) +/* Allocate a 2-D coefficient-block array */ +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + JBLOCKARRAY result; + JBLOCKROW workspace; + JDIMENSION rowsperchunk, currow, i; + long ltemp; + + /* Calculate max # of rows allowed in one allocation chunk */ + ltemp = (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr)) / + ((long) blocksperrow * SIZEOF(JBLOCK)); + if (ltemp <= 0) + ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); + if (ltemp < (long) numrows) + rowsperchunk = (JDIMENSION) ltemp; + else + rowsperchunk = numrows; + mem->last_rowsperchunk = rowsperchunk; + + /* Get space for row pointers (small object) */ + result = (JBLOCKARRAY) alloc_small(cinfo, pool_id, + (size_t) (numrows * SIZEOF(JBLOCKROW))); + + /* Get the rows themselves (large objects) */ + currow = 0; + while (currow < numrows) { + rowsperchunk = MIN(rowsperchunk, numrows - currow); + workspace = (JBLOCKROW) alloc_large(cinfo, pool_id, + (size_t) ((size_t) rowsperchunk * (size_t) blocksperrow + * SIZEOF(JBLOCK))); + for (i = rowsperchunk; i > 0; i--) { + result[currow++] = workspace; + workspace += blocksperrow; + } + } + + return result; +} + + +/* + * About virtual array management: + * + * The above "normal" array routines are only used to allocate strip buffers + * (as wide as the image, but just a few rows high). Full-image-sized buffers + * are handled as "virtual" arrays. The array is still accessed a strip at a + * time, but the memory manager must save the whole array for repeated + * accesses. The intended implementation is that there is a strip buffer in + * memory (as high as is possible given the desired memory limit), plus a + * backing file that holds the rest of the array. + * + * The request_virt_array routines are told the total size of the image and + * the maximum number of rows that will be accessed at once. The in-memory + * buffer must be at least as large as the maxaccess value. + * + * The request routines create control blocks but not the in-memory buffers. + * That is postponed until realize_virt_arrays is called. At that time the + * total amount of space needed is known (approximately, anyway), so free + * memory can be divided up fairly. + * + * The access_virt_array routines are responsible for making a specific strip + * area accessible (after reading or writing the backing file, if necessary). + * Note that the access routines are told whether the caller intends to modify + * the accessed strip; during a read-only pass this saves having to rewrite + * data to disk. The access routines are also responsible for pre-zeroing + * any newly accessed rows, if pre-zeroing was requested. + * + * In current usage, the access requests are usually for nonoverlapping + * strips; that is, successive access start_row numbers differ by exactly + * num_rows = maxaccess. This means we can get good performance with simple + * buffer dump/reload logic, by making the in-memory buffer be a multiple + * of the access height; then there will never be accesses across bufferload + * boundaries. The code will still work with overlapping access requests, + * but it doesn't handle bufferload overlaps very efficiently. + */ + + +METHODDEF(jvirt_sarray_ptr) +request_virt_sarray (j_common_ptr cinfo, int pool_id, boolean pre_zero, + JDIMENSION samplesperrow, JDIMENSION numrows, + JDIMENSION maxaccess) +/* Request a virtual 2-D sample array */ +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + jvirt_sarray_ptr result; + + /* Only IMAGE-lifetime virtual arrays are currently supported */ + if (pool_id != JPOOL_IMAGE) + ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ + + /* get control block */ + result = (jvirt_sarray_ptr) alloc_small(cinfo, pool_id, + SIZEOF(struct jvirt_sarray_control)); + + result->mem_buffer = NULL; /* marks array not yet realized */ + result->rows_in_array = numrows; + result->samplesperrow = samplesperrow; + result->maxaccess = maxaccess; + result->pre_zero = pre_zero; + result->b_s_open = FALSE; /* no associated backing-store object */ + result->next = mem->virt_sarray_list; /* add to list of virtual arrays */ + mem->virt_sarray_list = result; + + return result; +} + + +METHODDEF(jvirt_barray_ptr) +request_virt_barray (j_common_ptr cinfo, int pool_id, boolean pre_zero, + JDIMENSION blocksperrow, JDIMENSION numrows, + JDIMENSION maxaccess) +/* Request a virtual 2-D coefficient-block array */ +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + jvirt_barray_ptr result; + + /* Only IMAGE-lifetime virtual arrays are currently supported */ + if (pool_id != JPOOL_IMAGE) + ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ + + /* get control block */ + result = (jvirt_barray_ptr) alloc_small(cinfo, pool_id, + SIZEOF(struct jvirt_barray_control)); + + result->mem_buffer = NULL; /* marks array not yet realized */ + result->rows_in_array = numrows; + result->blocksperrow = blocksperrow; + result->maxaccess = maxaccess; + result->pre_zero = pre_zero; + result->b_s_open = FALSE; /* no associated backing-store object */ + result->next = mem->virt_barray_list; /* add to list of virtual arrays */ + mem->virt_barray_list = result; + + return result; +} + + +METHODDEF(void) +realize_virt_arrays (j_common_ptr cinfo) +/* Allocate the in-memory buffers for any unrealized virtual arrays */ +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + long space_per_minheight, maximum_space, avail_mem; + long minheights, max_minheights; + jvirt_sarray_ptr sptr; + jvirt_barray_ptr bptr; + + /* Compute the minimum space needed (maxaccess rows in each buffer) + * and the maximum space needed (full image height in each buffer). + * These may be of use to the system-dependent jpeg_mem_available routine. + */ + space_per_minheight = 0; + maximum_space = 0; + for (sptr = mem->virt_sarray_list; sptr != NULL; sptr = sptr->next) { + if (sptr->mem_buffer == NULL) { /* if not realized yet */ + space_per_minheight += (long) sptr->maxaccess * + (long) sptr->samplesperrow * SIZEOF(JSAMPLE); + maximum_space += (long) sptr->rows_in_array * + (long) sptr->samplesperrow * SIZEOF(JSAMPLE); + } + } + for (bptr = mem->virt_barray_list; bptr != NULL; bptr = bptr->next) { + if (bptr->mem_buffer == NULL) { /* if not realized yet */ + space_per_minheight += (long) bptr->maxaccess * + (long) bptr->blocksperrow * SIZEOF(JBLOCK); + maximum_space += (long) bptr->rows_in_array * + (long) bptr->blocksperrow * SIZEOF(JBLOCK); + } + } + + if (space_per_minheight <= 0) + return; /* no unrealized arrays, no work */ + + /* Determine amount of memory to actually use; this is system-dependent. */ + avail_mem = jpeg_mem_available(cinfo, space_per_minheight, maximum_space, + mem->total_space_allocated); + + /* If the maximum space needed is available, make all the buffers full + * height; otherwise parcel it out with the same number of minheights + * in each buffer. + */ + if (avail_mem >= maximum_space) + max_minheights = 1000000000L; + else { + max_minheights = avail_mem / space_per_minheight; + /* If there doesn't seem to be enough space, try to get the minimum + * anyway. This allows a "stub" implementation of jpeg_mem_available(). + */ + if (max_minheights <= 0) + max_minheights = 1; + } + + /* Allocate the in-memory buffers and initialize backing store as needed. */ + + for (sptr = mem->virt_sarray_list; sptr != NULL; sptr = sptr->next) { + if (sptr->mem_buffer == NULL) { /* if not realized yet */ + minheights = ((long) sptr->rows_in_array - 1L) / sptr->maxaccess + 1L; + if (minheights <= max_minheights) { + /* This buffer fits in memory */ + sptr->rows_in_mem = sptr->rows_in_array; + } else { + /* It doesn't fit in memory, create backing store. */ + sptr->rows_in_mem = (JDIMENSION) (max_minheights * sptr->maxaccess); + jpeg_open_backing_store(cinfo, & sptr->b_s_info, + (long) sptr->rows_in_array * + (long) sptr->samplesperrow * + (long) SIZEOF(JSAMPLE)); + sptr->b_s_open = TRUE; + } + sptr->mem_buffer = alloc_sarray(cinfo, JPOOL_IMAGE, + sptr->samplesperrow, sptr->rows_in_mem); + sptr->rowsperchunk = mem->last_rowsperchunk; + sptr->cur_start_row = 0; + sptr->first_undef_row = 0; + sptr->dirty = FALSE; + } + } + + for (bptr = mem->virt_barray_list; bptr != NULL; bptr = bptr->next) { + if (bptr->mem_buffer == NULL) { /* if not realized yet */ + minheights = ((long) bptr->rows_in_array - 1L) / bptr->maxaccess + 1L; + if (minheights <= max_minheights) { + /* This buffer fits in memory */ + bptr->rows_in_mem = bptr->rows_in_array; + } else { + /* It doesn't fit in memory, create backing store. */ + bptr->rows_in_mem = (JDIMENSION) (max_minheights * bptr->maxaccess); + jpeg_open_backing_store(cinfo, & bptr->b_s_info, + (long) bptr->rows_in_array * + (long) bptr->blocksperrow * + (long) SIZEOF(JBLOCK)); + bptr->b_s_open = TRUE; + } + bptr->mem_buffer = alloc_barray(cinfo, JPOOL_IMAGE, + bptr->blocksperrow, bptr->rows_in_mem); + bptr->rowsperchunk = mem->last_rowsperchunk; + bptr->cur_start_row = 0; + bptr->first_undef_row = 0; + bptr->dirty = FALSE; + } + } +} + + +LOCAL(void) +do_sarray_io (j_common_ptr cinfo, jvirt_sarray_ptr ptr, boolean writing) +/* Do backing store read or write of a virtual sample array */ +{ + long bytesperrow, file_offset, byte_count, rows, thisrow, i; + + bytesperrow = (long) ptr->samplesperrow * SIZEOF(JSAMPLE); + file_offset = ptr->cur_start_row * bytesperrow; + /* Loop to read or write each allocation chunk in mem_buffer */ + for (i = 0; i < (long) ptr->rows_in_mem; i += ptr->rowsperchunk) { + /* One chunk, but check for short chunk at end of buffer */ + rows = MIN((long) ptr->rowsperchunk, (long) ptr->rows_in_mem - i); + /* Transfer no more than is currently defined */ + thisrow = (long) ptr->cur_start_row + i; + rows = MIN(rows, (long) ptr->first_undef_row - thisrow); + /* Transfer no more than fits in file */ + rows = MIN(rows, (long) ptr->rows_in_array - thisrow); + if (rows <= 0) /* this chunk might be past end of file! */ + break; + byte_count = rows * bytesperrow; + if (writing) + (*ptr->b_s_info.write_backing_store) (cinfo, & ptr->b_s_info, + (void FAR *) ptr->mem_buffer[i], + file_offset, byte_count); + else + (*ptr->b_s_info.read_backing_store) (cinfo, & ptr->b_s_info, + (void FAR *) ptr->mem_buffer[i], + file_offset, byte_count); + file_offset += byte_count; + } +} + + +LOCAL(void) +do_barray_io (j_common_ptr cinfo, jvirt_barray_ptr ptr, boolean writing) +/* Do backing store read or write of a virtual coefficient-block array */ +{ + long bytesperrow, file_offset, byte_count, rows, thisrow, i; + + bytesperrow = (long) ptr->blocksperrow * SIZEOF(JBLOCK); + file_offset = ptr->cur_start_row * bytesperrow; + /* Loop to read or write each allocation chunk in mem_buffer */ + for (i = 0; i < (long) ptr->rows_in_mem; i += ptr->rowsperchunk) { + /* One chunk, but check for short chunk at end of buffer */ + rows = MIN((long) ptr->rowsperchunk, (long) ptr->rows_in_mem - i); + /* Transfer no more than is currently defined */ + thisrow = (long) ptr->cur_start_row + i; + rows = MIN(rows, (long) ptr->first_undef_row - thisrow); + /* Transfer no more than fits in file */ + rows = MIN(rows, (long) ptr->rows_in_array - thisrow); + if (rows <= 0) /* this chunk might be past end of file! */ + break; + byte_count = rows * bytesperrow; + if (writing) + (*ptr->b_s_info.write_backing_store) (cinfo, & ptr->b_s_info, + (void FAR *) ptr->mem_buffer[i], + file_offset, byte_count); + else + (*ptr->b_s_info.read_backing_store) (cinfo, & ptr->b_s_info, + (void FAR *) ptr->mem_buffer[i], + file_offset, byte_count); + file_offset += byte_count; + } +} + + +METHODDEF(JSAMPARRAY) +access_virt_sarray (j_common_ptr cinfo, jvirt_sarray_ptr ptr, + JDIMENSION start_row, JDIMENSION num_rows, + boolean writable) +/* Access the part of a virtual sample array starting at start_row */ +/* and extending for num_rows rows. writable is true if */ +/* caller intends to modify the accessed area. */ +{ + JDIMENSION end_row = start_row + num_rows; + JDIMENSION undef_row; + + /* debugging check */ + if (end_row > ptr->rows_in_array || num_rows > ptr->maxaccess || + ptr->mem_buffer == NULL) + ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); + + /* Make the desired part of the virtual array accessible */ + if (start_row < ptr->cur_start_row || + end_row > ptr->cur_start_row+ptr->rows_in_mem) { + if (! ptr->b_s_open) + ERREXIT(cinfo, JERR_VIRTUAL_BUG); + /* Flush old buffer contents if necessary */ + if (ptr->dirty) { + do_sarray_io(cinfo, ptr, TRUE); + ptr->dirty = FALSE; + } + /* Decide what part of virtual array to access. + * Algorithm: if target address > current window, assume forward scan, + * load starting at target address. If target address < current window, + * assume backward scan, load so that target area is top of window. + * Note that when switching from forward write to forward read, will have + * start_row = 0, so the limiting case applies and we load from 0 anyway. + */ + if (start_row > ptr->cur_start_row) { + ptr->cur_start_row = start_row; + } else { + /* use long arithmetic here to avoid overflow & unsigned problems */ + long ltemp; + + ltemp = (long) end_row - (long) ptr->rows_in_mem; + if (ltemp < 0) + ltemp = 0; /* don't fall off front end of file */ + ptr->cur_start_row = (JDIMENSION) ltemp; + } + /* Read in the selected part of the array. + * During the initial write pass, we will do no actual read + * because the selected part is all undefined. + */ + do_sarray_io(cinfo, ptr, FALSE); + } + /* Ensure the accessed part of the array is defined; prezero if needed. + * To improve locality of access, we only prezero the part of the array + * that the caller is about to access, not the entire in-memory array. + */ + if (ptr->first_undef_row < end_row) { + if (ptr->first_undef_row < start_row) { + if (writable) /* writer skipped over a section of array */ + ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); + undef_row = start_row; /* but reader is allowed to read ahead */ + } else { + undef_row = ptr->first_undef_row; + } + if (writable) + ptr->first_undef_row = end_row; + if (ptr->pre_zero) { + size_t bytesperrow = (size_t) ptr->samplesperrow * SIZEOF(JSAMPLE); + undef_row -= ptr->cur_start_row; /* make indexes relative to buffer */ + end_row -= ptr->cur_start_row; + while (undef_row < end_row) { + FMEMZERO((void FAR *) ptr->mem_buffer[undef_row], bytesperrow); + undef_row++; + } + } else { + if (! writable) /* reader looking at undefined data */ + ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); + } + } + /* Flag the buffer dirty if caller will write in it */ + if (writable) + ptr->dirty = TRUE; + /* Return address of proper part of the buffer */ + return ptr->mem_buffer + (start_row - ptr->cur_start_row); +} + + +METHODDEF(JBLOCKARRAY) +access_virt_barray (j_common_ptr cinfo, jvirt_barray_ptr ptr, + JDIMENSION start_row, JDIMENSION num_rows, + boolean writable) +/* Access the part of a virtual block array starting at start_row */ +/* and extending for num_rows rows. writable is true if */ +/* caller intends to modify the accessed area. */ +{ + JDIMENSION end_row = start_row + num_rows; + JDIMENSION undef_row; + + /* debugging check */ + if (end_row > ptr->rows_in_array || num_rows > ptr->maxaccess || + ptr->mem_buffer == NULL) + ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); + + /* Make the desired part of the virtual array accessible */ + if (start_row < ptr->cur_start_row || + end_row > ptr->cur_start_row+ptr->rows_in_mem) { + if (! ptr->b_s_open) + ERREXIT(cinfo, JERR_VIRTUAL_BUG); + /* Flush old buffer contents if necessary */ + if (ptr->dirty) { + do_barray_io(cinfo, ptr, TRUE); + ptr->dirty = FALSE; + } + /* Decide what part of virtual array to access. + * Algorithm: if target address > current window, assume forward scan, + * load starting at target address. If target address < current window, + * assume backward scan, load so that target area is top of window. + * Note that when switching from forward write to forward read, will have + * start_row = 0, so the limiting case applies and we load from 0 anyway. + */ + if (start_row > ptr->cur_start_row) { + ptr->cur_start_row = start_row; + } else { + /* use long arithmetic here to avoid overflow & unsigned problems */ + long ltemp; + + ltemp = (long) end_row - (long) ptr->rows_in_mem; + if (ltemp < 0) + ltemp = 0; /* don't fall off front end of file */ + ptr->cur_start_row = (JDIMENSION) ltemp; + } + /* Read in the selected part of the array. + * During the initial write pass, we will do no actual read + * because the selected part is all undefined. + */ + do_barray_io(cinfo, ptr, FALSE); + } + /* Ensure the accessed part of the array is defined; prezero if needed. + * To improve locality of access, we only prezero the part of the array + * that the caller is about to access, not the entire in-memory array. + */ + if (ptr->first_undef_row < end_row) { + if (ptr->first_undef_row < start_row) { + if (writable) /* writer skipped over a section of array */ + ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); + undef_row = start_row; /* but reader is allowed to read ahead */ + } else { + undef_row = ptr->first_undef_row; + } + if (writable) + ptr->first_undef_row = end_row; + if (ptr->pre_zero) { + size_t bytesperrow = (size_t) ptr->blocksperrow * SIZEOF(JBLOCK); + undef_row -= ptr->cur_start_row; /* make indexes relative to buffer */ + end_row -= ptr->cur_start_row; + while (undef_row < end_row) { + FMEMZERO((void FAR *) ptr->mem_buffer[undef_row], bytesperrow); + undef_row++; + } + } else { + if (! writable) /* reader looking at undefined data */ + ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); + } + } + /* Flag the buffer dirty if caller will write in it */ + if (writable) + ptr->dirty = TRUE; + /* Return address of proper part of the buffer */ + return ptr->mem_buffer + (start_row - ptr->cur_start_row); +} + + +/* + * Release all objects belonging to a specified pool. + */ + +METHODDEF(void) +free_pool (j_common_ptr cinfo, int pool_id) +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + small_pool_ptr shdr_ptr; + large_pool_ptr lhdr_ptr; + size_t space_freed; + + if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS) + ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ + +#ifdef MEM_STATS + if (cinfo->err->trace_level > 1) + print_mem_stats(cinfo, pool_id); /* print pool's memory usage statistics */ +#endif + + /* If freeing IMAGE pool, close any virtual arrays first */ + if (pool_id == JPOOL_IMAGE) { + jvirt_sarray_ptr sptr; + jvirt_barray_ptr bptr; + + for (sptr = mem->virt_sarray_list; sptr != NULL; sptr = sptr->next) { + if (sptr->b_s_open) { /* there may be no backing store */ + sptr->b_s_open = FALSE; /* prevent recursive close if error */ + (*sptr->b_s_info.close_backing_store) (cinfo, & sptr->b_s_info); + } + } + mem->virt_sarray_list = NULL; + for (bptr = mem->virt_barray_list; bptr != NULL; bptr = bptr->next) { + if (bptr->b_s_open) { /* there may be no backing store */ + bptr->b_s_open = FALSE; /* prevent recursive close if error */ + (*bptr->b_s_info.close_backing_store) (cinfo, & bptr->b_s_info); + } + } + mem->virt_barray_list = NULL; + } + + /* Release large objects */ + lhdr_ptr = mem->large_list[pool_id]; + mem->large_list[pool_id] = NULL; + + while (lhdr_ptr != NULL) { + large_pool_ptr next_lhdr_ptr = lhdr_ptr->hdr.next; + space_freed = lhdr_ptr->hdr.bytes_used + + lhdr_ptr->hdr.bytes_left + + SIZEOF(large_pool_hdr); + jpeg_free_large(cinfo, (void FAR *) lhdr_ptr, space_freed); + mem->total_space_allocated -= space_freed; + lhdr_ptr = next_lhdr_ptr; + } + + /* Release small objects */ + shdr_ptr = mem->small_list[pool_id]; + mem->small_list[pool_id] = NULL; + + while (shdr_ptr != NULL) { + small_pool_ptr next_shdr_ptr = shdr_ptr->hdr.next; + space_freed = shdr_ptr->hdr.bytes_used + + shdr_ptr->hdr.bytes_left + + SIZEOF(small_pool_hdr); + jpeg_free_small(cinfo, (void *) shdr_ptr, space_freed); + mem->total_space_allocated -= space_freed; + shdr_ptr = next_shdr_ptr; + } +} + + +/* + * Close up shop entirely. + * Note that this cannot be called unless cinfo->mem is non-NULL. + */ + +METHODDEF(void) +self_destruct (j_common_ptr cinfo) +{ + int pool; + + /* Close all backing store, release all memory. + * Releasing pools in reverse order might help avoid fragmentation + * with some (brain-damaged) malloc libraries. + */ + for (pool = JPOOL_NUMPOOLS-1; pool >= JPOOL_PERMANENT; pool--) { + free_pool(cinfo, pool); + } + + /* Release the memory manager control block too. */ + jpeg_free_small(cinfo, (void *) cinfo->mem, SIZEOF(my_memory_mgr)); + cinfo->mem = NULL; /* ensures I will be called only once */ + + jpeg_mem_term(cinfo); /* system-dependent cleanup */ +} + + +/* + * Memory manager initialization. + * When this is called, only the error manager pointer is valid in cinfo! + */ + +GLOBAL(void) +jinit_memory_mgr (j_common_ptr cinfo) +{ + my_mem_ptr mem; + long max_to_use; + int pool; + size_t test_mac; + + cinfo->mem = NULL; /* for safety if init fails */ + + /* Check for configuration errors. + * SIZEOF(ALIGN_TYPE) should be a power of 2; otherwise, it probably + * doesn't reflect any real hardware alignment requirement. + * The test is a little tricky: for X>0, X and X-1 have no one-bits + * in common if and only if X is a power of 2, ie has only one one-bit. + * Some compilers may give an "unreachable code" warning here; ignore it. + */ + if ((SIZEOF(ALIGN_TYPE) & (SIZEOF(ALIGN_TYPE)-1)) != 0) + ERREXIT(cinfo, JERR_BAD_ALIGN_TYPE); + /* MAX_ALLOC_CHUNK must be representable as type size_t, and must be + * a multiple of SIZEOF(ALIGN_TYPE). + * Again, an "unreachable code" warning may be ignored here. + * But a "constant too large" warning means you need to fix MAX_ALLOC_CHUNK. + */ + test_mac = (size_t) MAX_ALLOC_CHUNK; + if ((long) test_mac != MAX_ALLOC_CHUNK || + (MAX_ALLOC_CHUNK % SIZEOF(ALIGN_TYPE)) != 0) + ERREXIT(cinfo, JERR_BAD_ALLOC_CHUNK); + + max_to_use = jpeg_mem_init(cinfo); /* system-dependent initialization */ + + /* Attempt to allocate memory manager's control block */ + mem = (my_mem_ptr) jpeg_get_small(cinfo, SIZEOF(my_memory_mgr)); + + if (mem == NULL) { + jpeg_mem_term(cinfo); /* system-dependent cleanup */ + ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, 0); + } + + /* OK, fill in the method pointers */ + mem->pub.alloc_small = alloc_small; + mem->pub.alloc_large = alloc_large; + mem->pub.alloc_sarray = alloc_sarray; + mem->pub.alloc_barray = alloc_barray; + mem->pub.request_virt_sarray = request_virt_sarray; + mem->pub.request_virt_barray = request_virt_barray; + mem->pub.realize_virt_arrays = realize_virt_arrays; + mem->pub.access_virt_sarray = access_virt_sarray; + mem->pub.access_virt_barray = access_virt_barray; + mem->pub.free_pool = free_pool; + mem->pub.self_destruct = self_destruct; + + /* Make MAX_ALLOC_CHUNK accessible to other modules */ + mem->pub.max_alloc_chunk = MAX_ALLOC_CHUNK; + + /* Initialize working state */ + mem->pub.max_memory_to_use = max_to_use; + + for (pool = JPOOL_NUMPOOLS-1; pool >= JPOOL_PERMANENT; pool--) { + mem->small_list[pool] = NULL; + mem->large_list[pool] = NULL; + } + mem->virt_sarray_list = NULL; + mem->virt_barray_list = NULL; + + mem->total_space_allocated = SIZEOF(my_memory_mgr); + + /* Declare ourselves open for business */ + cinfo->mem = & mem->pub; + + /* Check for an environment variable JPEGMEM; if found, override the + * default max_memory setting from jpeg_mem_init. Note that the + * surrounding application may again override this value. + * If your system doesn't support getenv(), define NO_GETENV to disable + * this feature. + */ +#ifndef NO_GETENV + { char * memenv; + + if ((memenv = getenv("JPEGMEM")) != NULL) { + char ch = 'x'; + + if (sscanf(memenv, "%ld%c", &max_to_use, &ch) > 0) { + if (ch == 'm' || ch == 'M') + max_to_use *= 1000L; + mem->pub.max_memory_to_use = max_to_use * 1000L; + } + } + } +#endif + +} diff --git a/compat/libjpeg/jmemname.c b/compat/libjpeg/jmemname.c new file mode 100755 index 0000000..e28b212 --- /dev/null +++ b/compat/libjpeg/jmemname.c @@ -0,0 +1,276 @@ +/* + * jmemname.c + * + * Copyright (C) 1992-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file provides a generic implementation of the system-dependent + * portion of the JPEG memory manager. This implementation assumes that + * you must explicitly construct a name for each temp file. + * Also, the problem of determining the amount of memory available + * is shoved onto the user. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jmemsys.h" /* import the system-dependent declarations */ + +#ifndef HAVE_STDLIB_H /* should declare malloc(),free() */ +extern void * malloc JPP((size_t size)); +extern void free JPP((void *ptr)); +#endif + +#ifndef SEEK_SET /* pre-ANSI systems may not define this; */ +#define SEEK_SET 0 /* if not, assume 0 is correct */ +#endif + +#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */ +#define READ_BINARY "r" +#define RW_BINARY "w+" +#else +#ifdef VMS /* VMS is very nonstandard */ +#define READ_BINARY "rb", "ctx=stm" +#define RW_BINARY "w+b", "ctx=stm" +#else /* standard ANSI-compliant case */ +#define READ_BINARY "rb" +#define RW_BINARY "w+b" +#endif +#endif + + +/* + * Selection of a file name for a temporary file. + * This is system-dependent! + * + * The code as given is suitable for most Unix systems, and it is easily + * modified for most non-Unix systems. Some notes: + * 1. The temp file is created in the directory named by TEMP_DIRECTORY. + * The default value is /usr/tmp, which is the conventional place for + * creating large temp files on Unix. On other systems you'll probably + * want to change the file location. You can do this by editing the + * #define, or (preferred) by defining TEMP_DIRECTORY in jconfig.h. + * + * 2. If you need to change the file name as well as its location, + * you can override the TEMP_FILE_NAME macro. (Note that this is + * actually a printf format string; it must contain %s and %d.) + * Few people should need to do this. + * + * 3. mktemp() is used to ensure that multiple processes running + * simultaneously won't select the same file names. If your system + * doesn't have mktemp(), define NO_MKTEMP to do it the hard way. + * (If you don't have , also define NO_ERRNO_H.) + * + * 4. You probably want to define NEED_SIGNAL_CATCHER so that cjpeg.c/djpeg.c + * will cause the temp files to be removed if you stop the program early. + */ + +#ifndef TEMP_DIRECTORY /* can override from jconfig.h or Makefile */ +#define TEMP_DIRECTORY "/usr/tmp/" /* recommended setting for Unix */ +#endif + +static int next_file_num; /* to distinguish among several temp files */ + +#ifdef NO_MKTEMP + +#ifndef TEMP_FILE_NAME /* can override from jconfig.h or Makefile */ +#define TEMP_FILE_NAME "%sJPG%03d.TMP" +#endif + +#ifndef NO_ERRNO_H +#include /* to define ENOENT */ +#endif + +/* ANSI C specifies that errno is a macro, but on older systems it's more + * likely to be a plain int variable. And not all versions of errno.h + * bother to declare it, so we have to in order to be most portable. Thus: + */ +#ifndef errno +extern int errno; +#endif + + +LOCAL(void) +select_file_name (char * fname) +{ + FILE * tfile; + + /* Keep generating file names till we find one that's not in use */ + for (;;) { + next_file_num++; /* advance counter */ + sprintf(fname, TEMP_FILE_NAME, TEMP_DIRECTORY, next_file_num); + if ((tfile = fopen(fname, READ_BINARY)) == NULL) { + /* fopen could have failed for a reason other than the file not + * being there; for example, file there but unreadable. + * If isn't available, then we cannot test the cause. + */ +#ifdef ENOENT + if (errno != ENOENT) + continue; +#endif + break; + } + fclose(tfile); /* oops, it's there; close tfile & try again */ + } +} + +#else /* ! NO_MKTEMP */ + +/* Note that mktemp() requires the initial filename to end in six X's */ +#ifndef TEMP_FILE_NAME /* can override from jconfig.h or Makefile */ +#define TEMP_FILE_NAME "%sJPG%dXXXXXX" +#endif + +LOCAL(void) +select_file_name (char * fname) +{ + next_file_num++; /* advance counter */ + sprintf(fname, TEMP_FILE_NAME, TEMP_DIRECTORY, next_file_num); + mktemp(fname); /* make sure file name is unique */ + /* mktemp replaces the trailing XXXXXX with a unique string of characters */ +} + +#endif /* NO_MKTEMP */ + + +/* + * Memory allocation and freeing are controlled by the regular library + * routines malloc() and free(). + */ + +GLOBAL(void *) +jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject) +{ + return (void *) malloc(sizeofobject); +} + +GLOBAL(void) +jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject) +{ + free(object); +} + + +/* + * "Large" objects are treated the same as "small" ones. + * NB: although we include FAR keywords in the routine declarations, + * this file won't actually work in 80x86 small/medium model; at least, + * you probably won't be able to process useful-size images in only 64KB. + */ + +GLOBAL(void FAR *) +jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject) +{ + return (void FAR *) malloc(sizeofobject); +} + +GLOBAL(void) +jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject) +{ + free(object); +} + + +/* + * This routine computes the total memory space available for allocation. + * It's impossible to do this in a portable way; our current solution is + * to make the user tell us (with a default value set at compile time). + * If you can actually get the available space, it's a good idea to subtract + * a slop factor of 5% or so. + */ + +#ifndef DEFAULT_MAX_MEM /* so can override from makefile */ +#define DEFAULT_MAX_MEM 1000000L /* default: one megabyte */ +#endif + +GLOBAL(long) +jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed, + long max_bytes_needed, long already_allocated) +{ + return cinfo->mem->max_memory_to_use - already_allocated; +} + + +/* + * Backing store (temporary file) management. + * Backing store objects are only used when the value returned by + * jpeg_mem_available is less than the total space needed. You can dispense + * with these routines if you have plenty of virtual memory; see jmemnobs.c. + */ + + +METHODDEF(void) +read_backing_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + if (fseek(info->temp_file, file_offset, SEEK_SET)) + ERREXIT(cinfo, JERR_TFILE_SEEK); + if (JFREAD(info->temp_file, buffer_address, byte_count) + != (size_t) byte_count) + ERREXIT(cinfo, JERR_TFILE_READ); +} + + +METHODDEF(void) +write_backing_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + if (fseek(info->temp_file, file_offset, SEEK_SET)) + ERREXIT(cinfo, JERR_TFILE_SEEK); + if (JFWRITE(info->temp_file, buffer_address, byte_count) + != (size_t) byte_count) + ERREXIT(cinfo, JERR_TFILE_WRITE); +} + + +METHODDEF(void) +close_backing_store (j_common_ptr cinfo, backing_store_ptr info) +{ + fclose(info->temp_file); /* close the file */ + unlink(info->temp_name); /* delete the file */ +/* If your system doesn't have unlink(), use remove() instead. + * remove() is the ANSI-standard name for this function, but if + * your system was ANSI you'd be using jmemansi.c, right? + */ + TRACEMSS(cinfo, 1, JTRC_TFILE_CLOSE, info->temp_name); +} + + +/* + * Initial opening of a backing-store object. + */ + +GLOBAL(void) +jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info, + long total_bytes_needed) +{ + select_file_name(info->temp_name); + if ((info->temp_file = fopen(info->temp_name, RW_BINARY)) == NULL) + ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name); + info->read_backing_store = read_backing_store; + info->write_backing_store = write_backing_store; + info->close_backing_store = close_backing_store; + TRACEMSS(cinfo, 1, JTRC_TFILE_OPEN, info->temp_name); +} + + +/* + * These routines take care of any system-dependent initialization and + * cleanup required. + */ + +GLOBAL(long) +jpeg_mem_init (j_common_ptr cinfo) +{ + next_file_num = 0; /* initialize temp file name generator */ + return DEFAULT_MAX_MEM; /* default for max_memory_to_use */ +} + +GLOBAL(void) +jpeg_mem_term (j_common_ptr cinfo) +{ + /* no work */ +} diff --git a/compat/libjpeg/jmemnobs.c b/compat/libjpeg/jmemnobs.c new file mode 100755 index 0000000..6aa1e92 --- /dev/null +++ b/compat/libjpeg/jmemnobs.c @@ -0,0 +1,109 @@ +/* + * jmemnobs.c + * + * Copyright (C) 1992-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file provides a really simple implementation of the system- + * dependent portion of the JPEG memory manager. This implementation + * assumes that no backing-store files are needed: all required space + * can be obtained from malloc(). + * This is very portable in the sense that it'll compile on almost anything, + * but you'd better have lots of main memory (or virtual memory) if you want + * to process big images. + * Note that the max_memory_to_use option is ignored by this implementation. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jmemsys.h" /* import the system-dependent declarations */ + +#ifndef HAVE_STDLIB_H /* should declare malloc(),free() */ +extern void * malloc JPP((size_t size)); +extern void free JPP((void *ptr)); +#endif + + +/* + * Memory allocation and freeing are controlled by the regular library + * routines malloc() and free(). + */ + +GLOBAL(void *) +jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject) +{ + return (void *) malloc(sizeofobject); +} + +GLOBAL(void) +jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject) +{ + free(object); +} + + +/* + * "Large" objects are treated the same as "small" ones. + * NB: although we include FAR keywords in the routine declarations, + * this file won't actually work in 80x86 small/medium model; at least, + * you probably won't be able to process useful-size images in only 64KB. + */ + +GLOBAL(void FAR *) +jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject) +{ + return (void FAR *) malloc(sizeofobject); +} + +GLOBAL(void) +jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject) +{ + free(object); +} + + +/* + * This routine computes the total memory space available for allocation. + * Here we always say, "we got all you want bud!" + */ + +GLOBAL(long) +jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed, + long max_bytes_needed, long already_allocated) +{ + return max_bytes_needed; +} + + +/* + * Backing store (temporary file) management. + * Since jpeg_mem_available always promised the moon, + * this should never be called and we can just error out. + */ + +GLOBAL(void) +jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info, + long total_bytes_needed) +{ + ERREXIT(cinfo, JERR_NO_BACKING_STORE); +} + + +/* + * These routines take care of any system-dependent initialization and + * cleanup required. Here, there isn't any. + */ + +GLOBAL(long) +jpeg_mem_init (j_common_ptr cinfo) +{ + return 0; /* just set max_memory_to_use to 0 */ +} + +GLOBAL(void) +jpeg_mem_term (j_common_ptr cinfo) +{ + /* no work */ +} diff --git a/compat/libjpeg/jmemsys.h b/compat/libjpeg/jmemsys.h new file mode 100755 index 0000000..2a87961 --- /dev/null +++ b/compat/libjpeg/jmemsys.h @@ -0,0 +1,198 @@ +/* + * jmemsys.h + * + * Copyright (C) 1992-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This include file defines the interface between the system-independent + * and system-dependent portions of the JPEG memory manager. No other + * modules need include it. (The system-independent portion is jmemmgr.c; + * there are several different versions of the system-dependent portion.) + * + * This file works as-is for the system-dependent memory managers supplied + * in the IJG distribution. You may need to modify it if you write a + * custom memory manager. If system-dependent changes are needed in + * this file, the best method is to #ifdef them based on a configuration + * symbol supplied in jconfig.h, as we have done with USE_MSDOS_MEMMGR + * and USE_MAC_MEMMGR. + */ + + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jpeg_get_small jGetSmall +#define jpeg_free_small jFreeSmall +#define jpeg_get_large jGetLarge +#define jpeg_free_large jFreeLarge +#define jpeg_mem_available jMemAvail +#define jpeg_open_backing_store jOpenBackStore +#define jpeg_mem_init jMemInit +#define jpeg_mem_term jMemTerm +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + + +/* + * These two functions are used to allocate and release small chunks of + * memory. (Typically the total amount requested through jpeg_get_small is + * no more than 20K or so; this will be requested in chunks of a few K each.) + * Behavior should be the same as for the standard library functions malloc + * and free; in particular, jpeg_get_small must return NULL on failure. + * On most systems, these ARE malloc and free. jpeg_free_small is passed the + * size of the object being freed, just in case it's needed. + * On an 80x86 machine using small-data memory model, these manage near heap. + */ + +EXTERN(void *) jpeg_get_small JPP((j_common_ptr cinfo, size_t sizeofobject)); +EXTERN(void) jpeg_free_small JPP((j_common_ptr cinfo, void * object, + size_t sizeofobject)); + +/* + * These two functions are used to allocate and release large chunks of + * memory (up to the total free space designated by jpeg_mem_available). + * The interface is the same as above, except that on an 80x86 machine, + * far pointers are used. On most other machines these are identical to + * the jpeg_get/free_small routines; but we keep them separate anyway, + * in case a different allocation strategy is desirable for large chunks. + */ + +EXTERN(void FAR *) jpeg_get_large JPP((j_common_ptr cinfo, + size_t sizeofobject)); +EXTERN(void) jpeg_free_large JPP((j_common_ptr cinfo, void FAR * object, + size_t sizeofobject)); + +/* + * The macro MAX_ALLOC_CHUNK designates the maximum number of bytes that may + * be requested in a single call to jpeg_get_large (and jpeg_get_small for that + * matter, but that case should never come into play). This macro is needed + * to model the 64Kb-segment-size limit of far addressing on 80x86 machines. + * On those machines, we expect that jconfig.h will provide a proper value. + * On machines with 32-bit flat address spaces, any large constant may be used. + * + * NB: jmemmgr.c expects that MAX_ALLOC_CHUNK will be representable as type + * size_t and will be a multiple of sizeof(align_type). + */ + +#ifndef MAX_ALLOC_CHUNK /* may be overridden in jconfig.h */ +#define MAX_ALLOC_CHUNK 1000000000L +#endif + +/* + * This routine computes the total space still available for allocation by + * jpeg_get_large. If more space than this is needed, backing store will be + * used. NOTE: any memory already allocated must not be counted. + * + * There is a minimum space requirement, corresponding to the minimum + * feasible buffer sizes; jmemmgr.c will request that much space even if + * jpeg_mem_available returns zero. The maximum space needed, enough to hold + * all working storage in memory, is also passed in case it is useful. + * Finally, the total space already allocated is passed. If no better + * method is available, cinfo->mem->max_memory_to_use - already_allocated + * is often a suitable calculation. + * + * It is OK for jpeg_mem_available to underestimate the space available + * (that'll just lead to more backing-store access than is really necessary). + * However, an overestimate will lead to failure. Hence it's wise to subtract + * a slop factor from the true available space. 5% should be enough. + * + * On machines with lots of virtual memory, any large constant may be returned. + * Conversely, zero may be returned to always use the minimum amount of memory. + */ + +EXTERN(long) jpeg_mem_available JPP((j_common_ptr cinfo, + long min_bytes_needed, + long max_bytes_needed, + long already_allocated)); + + +/* + * This structure holds whatever state is needed to access a single + * backing-store object. The read/write/close method pointers are called + * by jmemmgr.c to manipulate the backing-store object; all other fields + * are private to the system-dependent backing store routines. + */ + +#define TEMP_NAME_LENGTH 64 /* max length of a temporary file's name */ + + +#ifdef USE_MSDOS_MEMMGR /* DOS-specific junk */ + +typedef unsigned short XMSH; /* type of extended-memory handles */ +typedef unsigned short EMSH; /* type of expanded-memory handles */ + +typedef union { + short file_handle; /* DOS file handle if it's a temp file */ + XMSH xms_handle; /* handle if it's a chunk of XMS */ + EMSH ems_handle; /* handle if it's a chunk of EMS */ +} handle_union; + +#endif /* USE_MSDOS_MEMMGR */ + +#ifdef USE_MAC_MEMMGR /* Mac-specific junk */ +#include +#endif /* USE_MAC_MEMMGR */ + + +typedef struct backing_store_struct * backing_store_ptr; + +typedef struct backing_store_struct { + /* Methods for reading/writing/closing this backing-store object */ + JMETHOD(void, read_backing_store, (j_common_ptr cinfo, + backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count)); + JMETHOD(void, write_backing_store, (j_common_ptr cinfo, + backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count)); + JMETHOD(void, close_backing_store, (j_common_ptr cinfo, + backing_store_ptr info)); + + /* Private fields for system-dependent backing-store management */ +#ifdef USE_MSDOS_MEMMGR + /* For the MS-DOS manager (jmemdos.c), we need: */ + handle_union handle; /* reference to backing-store storage object */ + char temp_name[TEMP_NAME_LENGTH]; /* name if it's a file */ +#else +#ifdef USE_MAC_MEMMGR + /* For the Mac manager (jmemmac.c), we need: */ + short temp_file; /* file reference number to temp file */ + FSSpec tempSpec; /* the FSSpec for the temp file */ + char temp_name[TEMP_NAME_LENGTH]; /* name if it's a file */ +#else + /* For a typical implementation with temp files, we need: */ + FILE * temp_file; /* stdio reference to temp file */ + char temp_name[TEMP_NAME_LENGTH]; /* name of temp file */ +#endif +#endif +} backing_store_info; + + +/* + * Initial opening of a backing-store object. This must fill in the + * read/write/close pointers in the object. The read/write routines + * may take an error exit if the specified maximum file size is exceeded. + * (If jpeg_mem_available always returns a large value, this routine can + * just take an error exit.) + */ + +EXTERN(void) jpeg_open_backing_store JPP((j_common_ptr cinfo, + backing_store_ptr info, + long total_bytes_needed)); + + +/* + * These routines take care of any system-dependent initialization and + * cleanup required. jpeg_mem_init will be called before anything is + * allocated (and, therefore, nothing in cinfo is of use except the error + * manager pointer). It should return a suitable default value for + * max_memory_to_use; this may subsequently be overridden by the surrounding + * application. (Note that max_memory_to_use is only important if + * jpeg_mem_available chooses to consult it ... no one else will.) + * jpeg_mem_term may assume that all requested memory has been freed and that + * all opened backing-store objects have been closed. + */ + +EXTERN(long) jpeg_mem_init JPP((j_common_ptr cinfo)); +EXTERN(void) jpeg_mem_term JPP((j_common_ptr cinfo)); diff --git a/compat/libjpeg/jmorecfg.h b/compat/libjpeg/jmorecfg.h new file mode 100755 index 0000000..7407ac7 --- /dev/null +++ b/compat/libjpeg/jmorecfg.h @@ -0,0 +1,446 @@ +/* + * jmorecfg.h + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 1997-2013 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains additional configuration options that customize the + * JPEG software for special applications or support machine-dependent + * optimizations. Most users will not need to touch this file. + */ + + +/* + * Define BITS_IN_JSAMPLE as either + * 8 for 8-bit sample values (the usual setting) + * 9 for 9-bit sample values + * 10 for 10-bit sample values + * 11 for 11-bit sample values + * 12 for 12-bit sample values + * Only 8, 9, 10, 11, and 12 bits sample data precision are supported for + * full-feature DCT processing. Further depths up to 16-bit may be added + * later for the lossless modes of operation. + * Run-time selection and conversion of data precision will be added later + * and are currently not supported, sorry. + * Exception: The transcoding part (jpegtran) supports all settings in a + * single instance, since it operates on the level of DCT coefficients and + * not sample values. The DCT coefficients are of the same type (16 bits) + * in all cases (see below). + */ + +#define BITS_IN_JSAMPLE 8 /* use 8, 9, 10, 11, or 12 */ + + +/* + * Maximum number of components (color channels) allowed in JPEG image. + * To meet the letter of the JPEG spec, set this to 255. However, darn + * few applications need more than 4 channels (maybe 5 for CMYK + alpha + * mask). We recommend 10 as a reasonable compromise; use 4 if you are + * really short on memory. (Each allowed component costs a hundred or so + * bytes of storage, whether actually used in an image or not.) + */ + +#define MAX_COMPONENTS 10 /* maximum number of image components */ + + +/* + * Basic data types. + * You may need to change these if you have a machine with unusual data + * type sizes; for example, "char" not 8 bits, "short" not 16 bits, + * or "long" not 32 bits. We don't care whether "int" is 16 or 32 bits, + * but it had better be at least 16. + */ + +/* Representation of a single sample (pixel element value). + * We frequently allocate large arrays of these, so it's important to keep + * them small. But if you have memory to burn and access to char or short + * arrays is very slow on your hardware, you might want to change these. + */ + +#if BITS_IN_JSAMPLE == 8 +/* JSAMPLE should be the smallest type that will hold the values 0..255. + * You can use a signed char by having GETJSAMPLE mask it with 0xFF. + */ + +#ifdef HAVE_UNSIGNED_CHAR + +typedef unsigned char JSAMPLE; +#define GETJSAMPLE(value) ((int) (value)) + +#else /* not HAVE_UNSIGNED_CHAR */ + +typedef char JSAMPLE; +#ifdef CHAR_IS_UNSIGNED +#define GETJSAMPLE(value) ((int) (value)) +#else +#define GETJSAMPLE(value) ((int) (value) & 0xFF) +#endif /* CHAR_IS_UNSIGNED */ + +#endif /* HAVE_UNSIGNED_CHAR */ + +#define MAXJSAMPLE 255 +#define CENTERJSAMPLE 128 + +#endif /* BITS_IN_JSAMPLE == 8 */ + + +#if BITS_IN_JSAMPLE == 9 +/* JSAMPLE should be the smallest type that will hold the values 0..511. + * On nearly all machines "short" will do nicely. + */ + +typedef short JSAMPLE; +#define GETJSAMPLE(value) ((int) (value)) + +#define MAXJSAMPLE 511 +#define CENTERJSAMPLE 256 + +#endif /* BITS_IN_JSAMPLE == 9 */ + + +#if BITS_IN_JSAMPLE == 10 +/* JSAMPLE should be the smallest type that will hold the values 0..1023. + * On nearly all machines "short" will do nicely. + */ + +typedef short JSAMPLE; +#define GETJSAMPLE(value) ((int) (value)) + +#define MAXJSAMPLE 1023 +#define CENTERJSAMPLE 512 + +#endif /* BITS_IN_JSAMPLE == 10 */ + + +#if BITS_IN_JSAMPLE == 11 +/* JSAMPLE should be the smallest type that will hold the values 0..2047. + * On nearly all machines "short" will do nicely. + */ + +typedef short JSAMPLE; +#define GETJSAMPLE(value) ((int) (value)) + +#define MAXJSAMPLE 2047 +#define CENTERJSAMPLE 1024 + +#endif /* BITS_IN_JSAMPLE == 11 */ + + +#if BITS_IN_JSAMPLE == 12 +/* JSAMPLE should be the smallest type that will hold the values 0..4095. + * On nearly all machines "short" will do nicely. + */ + +typedef short JSAMPLE; +#define GETJSAMPLE(value) ((int) (value)) + +#define MAXJSAMPLE 4095 +#define CENTERJSAMPLE 2048 + +#endif /* BITS_IN_JSAMPLE == 12 */ + + +/* Representation of a DCT frequency coefficient. + * This should be a signed value of at least 16 bits; "short" is usually OK. + * Again, we allocate large arrays of these, but you can change to int + * if you have memory to burn and "short" is really slow. + */ + +typedef short JCOEF; + + +/* Compressed datastreams are represented as arrays of JOCTET. + * These must be EXACTLY 8 bits wide, at least once they are written to + * external storage. Note that when using the stdio data source/destination + * managers, this is also the data type passed to fread/fwrite. + */ + +#ifdef HAVE_UNSIGNED_CHAR + +typedef unsigned char JOCTET; +#define GETJOCTET(value) (value) + +#else /* not HAVE_UNSIGNED_CHAR */ + +typedef char JOCTET; +#ifdef CHAR_IS_UNSIGNED +#define GETJOCTET(value) (value) +#else +#define GETJOCTET(value) ((value) & 0xFF) +#endif /* CHAR_IS_UNSIGNED */ + +#endif /* HAVE_UNSIGNED_CHAR */ + + +/* These typedefs are used for various table entries and so forth. + * They must be at least as wide as specified; but making them too big + * won't cost a huge amount of memory, so we don't provide special + * extraction code like we did for JSAMPLE. (In other words, these + * typedefs live at a different point on the speed/space tradeoff curve.) + */ + +/* UINT8 must hold at least the values 0..255. */ + +#ifdef HAVE_UNSIGNED_CHAR +typedef unsigned char UINT8; +#else /* not HAVE_UNSIGNED_CHAR */ +#ifdef CHAR_IS_UNSIGNED +typedef char UINT8; +#else /* not CHAR_IS_UNSIGNED */ +typedef short UINT8; +#endif /* CHAR_IS_UNSIGNED */ +#endif /* HAVE_UNSIGNED_CHAR */ + +/* UINT16 must hold at least the values 0..65535. */ + +#ifdef HAVE_UNSIGNED_SHORT +typedef unsigned short UINT16; +#else /* not HAVE_UNSIGNED_SHORT */ +typedef unsigned int UINT16; +#endif /* HAVE_UNSIGNED_SHORT */ + +/* INT16 must hold at least the values -32768..32767. */ + +#ifndef XMD_H /* X11/xmd.h correctly defines INT16 */ +typedef short INT16; +#endif + +/* INT32 must hold at least signed 32-bit values. */ + +#ifndef XMD_H /* X11/xmd.h correctly defines INT32 */ +#ifndef _BASETSD_H_ /* Microsoft defines it in basetsd.h */ +#ifndef _BASETSD_H /* MinGW is slightly different */ +#ifndef QGLOBAL_H /* Qt defines it in qglobal.h */ +typedef long INT32; +#endif +#endif +#endif +#endif + +/* Datatype used for image dimensions. The JPEG standard only supports + * images up to 64K*64K due to 16-bit fields in SOF markers. Therefore + * "unsigned int" is sufficient on all machines. However, if you need to + * handle larger images and you don't mind deviating from the spec, you + * can change this datatype. + */ + +typedef unsigned int JDIMENSION; + +#define JPEG_MAX_DIMENSION 65500L /* a tad under 64K to prevent overflows */ + + +/* These macros are used in all function definitions and extern declarations. + * You could modify them if you need to change function linkage conventions; + * in particular, you'll need to do that to make the library a Windows DLL. + * Another application is to make all functions global for use with debuggers + * or code profilers that require it. + */ + +/* a function called through method pointers: */ +#define METHODDEF(type) static type +/* a function used only in its module: */ +#define LOCAL(type) static type +/* a function referenced thru EXTERNs: */ +#define GLOBAL(type) type +/* a reference to a GLOBAL function: */ +#define EXTERN(type) extern type + + +/* This macro is used to declare a "method", that is, a function pointer. + * We want to supply prototype parameters if the compiler can cope. + * Note that the arglist parameter must be parenthesized! + * Again, you can customize this if you need special linkage keywords. + */ + +#ifdef HAVE_PROTOTYPES +#define JMETHOD(type,methodname,arglist) type (*methodname) arglist +#else +#define JMETHOD(type,methodname,arglist) type (*methodname) () +#endif + + +/* The noreturn type identifier is used to declare functions + * which cannot return. + * Compilers can thus create more optimized code and perform + * better checks for warnings and errors. + * Static analyzer tools can make improved inferences about + * execution paths and are prevented from giving false alerts. + * + * Unfortunately, the proposed specifications of corresponding + * extensions in the Dec 2011 ISO C standard revision (C11), + * GCC, MSVC, etc. are not viable. + * Thus we introduce a user defined type to declare noreturn + * functions at least for clarity. A proper compiler would + * have a suitable noreturn type to match in place of void. + */ + +#ifndef HAVE_NORETURN_T +typedef void noreturn_t; +#endif + + +/* Here is the pseudo-keyword for declaring pointers that must be "far" + * on 80x86 machines. Most of the specialized coding for 80x86 is handled + * by just saying "FAR *" where such a pointer is needed. In a few places + * explicit coding is needed; see uses of the NEED_FAR_POINTERS symbol. + */ + +#ifndef FAR +#ifdef NEED_FAR_POINTERS +#define FAR far +#else +#define FAR +#endif +#endif + + +/* + * On a few systems, type boolean and/or its values FALSE, TRUE may appear + * in standard header files. Or you may have conflicts with application- + * specific header files that you want to include together with these files. + * Defining HAVE_BOOLEAN before including jpeglib.h should make it work. + */ + +#ifndef HAVE_BOOLEAN +#if defined FALSE || defined TRUE || defined QGLOBAL_H +/* Qt3 defines FALSE and TRUE as "const" variables in qglobal.h */ +typedef int boolean; +#ifndef FALSE /* in case these macros already exist */ +#define FALSE 0 /* values of boolean */ +#endif +#ifndef TRUE +#define TRUE 1 +#endif +#else +typedef enum { FALSE = 0, TRUE = 1 } boolean; +#endif +#endif + + +/* + * The remaining options affect code selection within the JPEG library, + * but they don't need to be visible to most applications using the library. + * To minimize application namespace pollution, the symbols won't be + * defined unless JPEG_INTERNALS or JPEG_INTERNAL_OPTIONS has been defined. + */ + +#ifdef JPEG_INTERNALS +#define JPEG_INTERNAL_OPTIONS +#endif + +#ifdef JPEG_INTERNAL_OPTIONS + + +/* + * These defines indicate whether to include various optional functions. + * Undefining some of these symbols will produce a smaller but less capable + * library. Note that you can leave certain source files out of the + * compilation/linking process if you've #undef'd the corresponding symbols. + * (You may HAVE to do that if your compiler doesn't like null source files.) + */ + +/* Capability options common to encoder and decoder: */ + +#define DCT_ISLOW_SUPPORTED /* slow but accurate integer algorithm */ +#define DCT_IFAST_SUPPORTED /* faster, less accurate integer method */ +#define DCT_FLOAT_SUPPORTED /* floating-point: accurate, fast on fast HW */ + +/* Encoder capability options: */ + +#define C_ARITH_CODING_SUPPORTED /* Arithmetic coding back end? */ +#define C_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */ +#define C_PROGRESSIVE_SUPPORTED /* Progressive JPEG? (Requires MULTISCAN)*/ +#define DCT_SCALING_SUPPORTED /* Input rescaling via DCT? (Requires DCT_ISLOW)*/ +#define ENTROPY_OPT_SUPPORTED /* Optimization of entropy coding parms? */ +/* Note: if you selected more than 8-bit data precision, it is dangerous to + * turn off ENTROPY_OPT_SUPPORTED. The standard Huffman tables are only + * good for 8-bit precision, so arithmetic coding is recommended for higher + * precision. The Huffman encoder normally uses entropy optimization to + * compute usable tables for higher precision. Otherwise, you'll have to + * supply different default Huffman tables. + * The exact same statements apply for progressive JPEG: the default tables + * don't work for progressive mode. (This may get fixed, however.) + */ +#define INPUT_SMOOTHING_SUPPORTED /* Input image smoothing option? */ + +/* Decoder capability options: */ + +#define D_ARITH_CODING_SUPPORTED /* Arithmetic coding back end? */ +#define D_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */ +#define D_PROGRESSIVE_SUPPORTED /* Progressive JPEG? (Requires MULTISCAN)*/ +#define IDCT_SCALING_SUPPORTED /* Output rescaling via IDCT? (Requires DCT_ISLOW)*/ +#define SAVE_MARKERS_SUPPORTED /* jpeg_save_markers() needed? */ +#define BLOCK_SMOOTHING_SUPPORTED /* Block smoothing? (Progressive only) */ +#undef UPSAMPLE_SCALING_SUPPORTED /* Output rescaling at upsample stage? */ +#define UPSAMPLE_MERGING_SUPPORTED /* Fast path for sloppy upsampling? */ +#define QUANT_1PASS_SUPPORTED /* 1-pass color quantization? */ +#define QUANT_2PASS_SUPPORTED /* 2-pass color quantization? */ + +/* more capability options later, no doubt */ + + +/* + * Ordering of RGB data in scanlines passed to or from the application. + * If your application wants to deal with data in the order B,G,R, just + * change these macros. You can also deal with formats such as R,G,B,X + * (one extra byte per pixel) by changing RGB_PIXELSIZE. Note that changing + * the offsets will also change the order in which colormap data is organized. + * RESTRICTIONS: + * 1. The sample applications cjpeg,djpeg do NOT support modified RGB formats. + * 2. The color quantizer modules will not behave desirably if RGB_PIXELSIZE + * is not 3 (they don't understand about dummy color components!). So you + * can't use color quantization if you change that value. + */ + +#define RGB_RED 0 /* Offset of Red in an RGB scanline element */ +#define RGB_GREEN 1 /* Offset of Green */ +#define RGB_BLUE 2 /* Offset of Blue */ +#define RGB_PIXELSIZE 3 /* JSAMPLEs per RGB scanline element */ + + +/* Definitions for speed-related optimizations. */ + + +/* If your compiler supports inline functions, define INLINE + * as the inline keyword; otherwise define it as empty. + */ + +#ifndef INLINE +#ifdef __GNUC__ /* for instance, GNU C knows about inline */ +#define INLINE __inline__ +#endif +#ifndef INLINE +#define INLINE /* default is to define it as empty */ +#endif +#endif + + +/* On some machines (notably 68000 series) "int" is 32 bits, but multiplying + * two 16-bit shorts is faster than multiplying two ints. Define MULTIPLIER + * as short on such a machine. MULTIPLIER must be at least 16 bits wide. + */ + +#ifndef MULTIPLIER +#define MULTIPLIER int /* type for fastest integer multiply */ +#endif + + +/* FAST_FLOAT should be either float or double, whichever is done faster + * by your compiler. (Note that this type is only used in the floating point + * DCT routines, so it only matters if you've defined DCT_FLOAT_SUPPORTED.) + * Typically, float is faster in ANSI C compilers, while double is faster in + * pre-ANSI compilers (because they insist on converting to double anyway). + * The code below therefore chooses float if we have ANSI-style prototypes. + */ + +#ifndef FAST_FLOAT +#ifdef HAVE_PROTOTYPES +#define FAST_FLOAT float +#else +#define FAST_FLOAT double +#endif +#endif + +#endif /* JPEG_INTERNAL_OPTIONS */ diff --git a/compat/libjpeg/jpegint.h b/compat/libjpeg/jpegint.h new file mode 100755 index 0000000..ec14a1e --- /dev/null +++ b/compat/libjpeg/jpegint.h @@ -0,0 +1,426 @@ +/* + * jpegint.h + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 1997-2013 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file provides common declarations for the various JPEG modules. + * These declarations are considered internal to the JPEG library; most + * applications using the library shouldn't need to include this file. + */ + + +/* Declarations for both compression & decompression */ + +typedef enum { /* Operating modes for buffer controllers */ + JBUF_PASS_THRU, /* Plain stripwise operation */ + /* Remaining modes require a full-image buffer to have been created */ + JBUF_SAVE_SOURCE, /* Run source subobject only, save output */ + JBUF_CRANK_DEST, /* Run dest subobject only, using saved data */ + JBUF_SAVE_AND_PASS /* Run both subobjects, save output */ +} J_BUF_MODE; + +/* Values of global_state field (jdapi.c has some dependencies on ordering!) */ +#define CSTATE_START 100 /* after create_compress */ +#define CSTATE_SCANNING 101 /* start_compress done, write_scanlines OK */ +#define CSTATE_RAW_OK 102 /* start_compress done, write_raw_data OK */ +#define CSTATE_WRCOEFS 103 /* jpeg_write_coefficients done */ +#define DSTATE_START 200 /* after create_decompress */ +#define DSTATE_INHEADER 201 /* reading header markers, no SOS yet */ +#define DSTATE_READY 202 /* found SOS, ready for start_decompress */ +#define DSTATE_PRELOAD 203 /* reading multiscan file in start_decompress*/ +#define DSTATE_PRESCAN 204 /* performing dummy pass for 2-pass quant */ +#define DSTATE_SCANNING 205 /* start_decompress done, read_scanlines OK */ +#define DSTATE_RAW_OK 206 /* start_decompress done, read_raw_data OK */ +#define DSTATE_BUFIMAGE 207 /* expecting jpeg_start_output */ +#define DSTATE_BUFPOST 208 /* looking for SOS/EOI in jpeg_finish_output */ +#define DSTATE_RDCOEFS 209 /* reading file in jpeg_read_coefficients */ +#define DSTATE_STOPPING 210 /* looking for EOI in jpeg_finish_decompress */ + + +/* Declarations for compression modules */ + +/* Master control module */ +struct jpeg_comp_master { + JMETHOD(void, prepare_for_pass, (j_compress_ptr cinfo)); + JMETHOD(void, pass_startup, (j_compress_ptr cinfo)); + JMETHOD(void, finish_pass, (j_compress_ptr cinfo)); + + /* State variables made visible to other modules */ + boolean call_pass_startup; /* True if pass_startup must be called */ + boolean is_last_pass; /* True during last pass */ +}; + +/* Main buffer control (downsampled-data buffer) */ +struct jpeg_c_main_controller { + JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); + JMETHOD(void, process_data, (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, + JDIMENSION in_rows_avail)); +}; + +/* Compression preprocessing (downsampling input buffer control) */ +struct jpeg_c_prep_controller { + JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); + JMETHOD(void, pre_process_data, (j_compress_ptr cinfo, + JSAMPARRAY input_buf, + JDIMENSION *in_row_ctr, + JDIMENSION in_rows_avail, + JSAMPIMAGE output_buf, + JDIMENSION *out_row_group_ctr, + JDIMENSION out_row_groups_avail)); +}; + +/* Coefficient buffer control */ +struct jpeg_c_coef_controller { + JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); + JMETHOD(boolean, compress_data, (j_compress_ptr cinfo, + JSAMPIMAGE input_buf)); +}; + +/* Colorspace conversion */ +struct jpeg_color_converter { + JMETHOD(void, start_pass, (j_compress_ptr cinfo)); + JMETHOD(void, color_convert, (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPIMAGE output_buf, + JDIMENSION output_row, int num_rows)); +}; + +/* Downsampling */ +struct jpeg_downsampler { + JMETHOD(void, start_pass, (j_compress_ptr cinfo)); + JMETHOD(void, downsample, (j_compress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION in_row_index, + JSAMPIMAGE output_buf, + JDIMENSION out_row_group_index)); + + boolean need_context_rows; /* TRUE if need rows above & below */ +}; + +/* Forward DCT (also controls coefficient quantization) */ +typedef JMETHOD(void, forward_DCT_ptr, + (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY sample_data, JBLOCKROW coef_blocks, + JDIMENSION start_row, JDIMENSION start_col, + JDIMENSION num_blocks)); + +struct jpeg_forward_dct { + JMETHOD(void, start_pass, (j_compress_ptr cinfo)); + /* It is useful to allow each component to have a separate FDCT method. */ + forward_DCT_ptr forward_DCT[MAX_COMPONENTS]; +}; + +/* Entropy encoding */ +struct jpeg_entropy_encoder { + JMETHOD(void, start_pass, (j_compress_ptr cinfo, boolean gather_statistics)); + JMETHOD(boolean, encode_mcu, (j_compress_ptr cinfo, JBLOCKROW *MCU_data)); + JMETHOD(void, finish_pass, (j_compress_ptr cinfo)); +}; + +/* Marker writing */ +struct jpeg_marker_writer { + JMETHOD(void, write_file_header, (j_compress_ptr cinfo)); + JMETHOD(void, write_frame_header, (j_compress_ptr cinfo)); + JMETHOD(void, write_scan_header, (j_compress_ptr cinfo)); + JMETHOD(void, write_file_trailer, (j_compress_ptr cinfo)); + JMETHOD(void, write_tables_only, (j_compress_ptr cinfo)); + /* These routines are exported to allow insertion of extra markers */ + /* Probably only COM and APPn markers should be written this way */ + JMETHOD(void, write_marker_header, (j_compress_ptr cinfo, int marker, + unsigned int datalen)); + JMETHOD(void, write_marker_byte, (j_compress_ptr cinfo, int val)); +}; + + +/* Declarations for decompression modules */ + +/* Master control module */ +struct jpeg_decomp_master { + JMETHOD(void, prepare_for_output_pass, (j_decompress_ptr cinfo)); + JMETHOD(void, finish_output_pass, (j_decompress_ptr cinfo)); + + /* State variables made visible to other modules */ + boolean is_dummy_pass; /* True during 1st pass for 2-pass quant */ +}; + +/* Input control module */ +struct jpeg_input_controller { + JMETHOD(int, consume_input, (j_decompress_ptr cinfo)); + JMETHOD(void, reset_input_controller, (j_decompress_ptr cinfo)); + JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo)); + JMETHOD(void, finish_input_pass, (j_decompress_ptr cinfo)); + + /* State variables made visible to other modules */ + boolean has_multiple_scans; /* True if file has multiple scans */ + boolean eoi_reached; /* True when EOI has been consumed */ +}; + +/* Main buffer control (downsampled-data buffer) */ +struct jpeg_d_main_controller { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo, J_BUF_MODE pass_mode)); + JMETHOD(void, process_data, (j_decompress_ptr cinfo, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail)); +}; + +/* Coefficient buffer control */ +struct jpeg_d_coef_controller { + JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo)); + JMETHOD(int, consume_data, (j_decompress_ptr cinfo)); + JMETHOD(void, start_output_pass, (j_decompress_ptr cinfo)); + JMETHOD(int, decompress_data, (j_decompress_ptr cinfo, + JSAMPIMAGE output_buf)); + /* Pointer to array of coefficient virtual arrays, or NULL if none */ + jvirt_barray_ptr *coef_arrays; +}; + +/* Decompression postprocessing (color quantization buffer control) */ +struct jpeg_d_post_controller { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo, J_BUF_MODE pass_mode)); + JMETHOD(void, post_process_data, (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, + JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, + JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail)); +}; + +/* Marker reading & parsing */ +struct jpeg_marker_reader { + JMETHOD(void, reset_marker_reader, (j_decompress_ptr cinfo)); + /* Read markers until SOS or EOI. + * Returns same codes as are defined for jpeg_consume_input: + * JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI. + */ + JMETHOD(int, read_markers, (j_decompress_ptr cinfo)); + /* Read a restart marker --- exported for use by entropy decoder only */ + jpeg_marker_parser_method read_restart_marker; + + /* State of marker reader --- nominally internal, but applications + * supplying COM or APPn handlers might like to know the state. + */ + boolean saw_SOI; /* found SOI? */ + boolean saw_SOF; /* found SOF? */ + int next_restart_num; /* next restart number expected (0-7) */ + unsigned int discarded_bytes; /* # of bytes skipped looking for a marker */ +}; + +/* Entropy decoding */ +struct jpeg_entropy_decoder { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); + JMETHOD(boolean, decode_mcu, (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)); + JMETHOD(void, finish_pass, (j_decompress_ptr cinfo)); +}; + +/* Inverse DCT (also performs dequantization) */ +typedef JMETHOD(void, inverse_DCT_method_ptr, + (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col)); + +struct jpeg_inverse_dct { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); + /* It is useful to allow each component to have a separate IDCT method. */ + inverse_DCT_method_ptr inverse_DCT[MAX_COMPONENTS]; +}; + +/* Upsampling (note that upsampler must also call color converter) */ +struct jpeg_upsampler { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); + JMETHOD(void, upsample, (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, + JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, + JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail)); + + boolean need_context_rows; /* TRUE if need rows above & below */ +}; + +/* Colorspace conversion */ +struct jpeg_color_deconverter { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); + JMETHOD(void, color_convert, (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows)); +}; + +/* Color quantization or color precision reduction */ +struct jpeg_color_quantizer { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo, boolean is_pre_scan)); + JMETHOD(void, color_quantize, (j_decompress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPARRAY output_buf, + int num_rows)); + JMETHOD(void, finish_pass, (j_decompress_ptr cinfo)); + JMETHOD(void, new_color_map, (j_decompress_ptr cinfo)); +}; + + +/* Miscellaneous useful macros */ + +#undef MAX +#define MAX(a,b) ((a) > (b) ? (a) : (b)) +#undef MIN +#define MIN(a,b) ((a) < (b) ? (a) : (b)) + + +/* We assume that right shift corresponds to signed division by 2 with + * rounding towards minus infinity. This is correct for typical "arithmetic + * shift" instructions that shift in copies of the sign bit. But some + * C compilers implement >> with an unsigned shift. For these machines you + * must define RIGHT_SHIFT_IS_UNSIGNED. + * RIGHT_SHIFT provides a proper signed right shift of an INT32 quantity. + * It is only applied with constant shift counts. SHIFT_TEMPS must be + * included in the variables of any routine using RIGHT_SHIFT. + */ + +#ifdef RIGHT_SHIFT_IS_UNSIGNED +#define SHIFT_TEMPS INT32 shift_temp; +#define RIGHT_SHIFT(x,shft) \ + ((shift_temp = (x)) < 0 ? \ + (shift_temp >> (shft)) | ((~((INT32) 0)) << (32-(shft))) : \ + (shift_temp >> (shft))) +#else +#define SHIFT_TEMPS +#define RIGHT_SHIFT(x,shft) ((x) >> (shft)) +#endif + + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jinit_compress_master jICompress +#define jinit_c_master_control jICMaster +#define jinit_c_main_controller jICMainC +#define jinit_c_prep_controller jICPrepC +#define jinit_c_coef_controller jICCoefC +#define jinit_color_converter jICColor +#define jinit_downsampler jIDownsampler +#define jinit_forward_dct jIFDCT +#define jinit_huff_encoder jIHEncoder +#define jinit_arith_encoder jIAEncoder +#define jinit_marker_writer jIMWriter +#define jinit_master_decompress jIDMaster +#define jinit_d_main_controller jIDMainC +#define jinit_d_coef_controller jIDCoefC +#define jinit_d_post_controller jIDPostC +#define jinit_input_controller jIInCtlr +#define jinit_marker_reader jIMReader +#define jinit_huff_decoder jIHDecoder +#define jinit_arith_decoder jIADecoder +#define jinit_inverse_dct jIIDCT +#define jinit_upsampler jIUpsampler +#define jinit_color_deconverter jIDColor +#define jinit_1pass_quantizer jI1Quant +#define jinit_2pass_quantizer jI2Quant +#define jinit_merged_upsampler jIMUpsampler +#define jinit_memory_mgr jIMemMgr +#define jdiv_round_up jDivRound +#define jround_up jRound +#define jzero_far jZeroFar +#define jcopy_sample_rows jCopySamples +#define jcopy_block_row jCopyBlocks +#define jpeg_zigzag_order jZIGTable +#define jpeg_natural_order jZAGTable +#define jpeg_natural_order7 jZAG7Table +#define jpeg_natural_order6 jZAG6Table +#define jpeg_natural_order5 jZAG5Table +#define jpeg_natural_order4 jZAG4Table +#define jpeg_natural_order3 jZAG3Table +#define jpeg_natural_order2 jZAG2Table +#define jpeg_aritab jAriTab +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + + +/* On normal machines we can apply MEMCOPY() and MEMZERO() to sample arrays + * and coefficient-block arrays. This won't work on 80x86 because the arrays + * are FAR and we're assuming a small-pointer memory model. However, some + * DOS compilers provide far-pointer versions of memcpy() and memset() even + * in the small-model libraries. These will be used if USE_FMEM is defined. + * Otherwise, the routines in jutils.c do it the hard way. + */ + +#ifndef NEED_FAR_POINTERS /* normal case, same as regular macro */ +#define FMEMZERO(target,size) MEMZERO(target,size) +#else /* 80x86 case */ +#ifdef USE_FMEM +#define FMEMZERO(target,size) _fmemset((void FAR *)(target), 0, (size_t)(size)) +#else +EXTERN(void) jzero_far JPP((void FAR * target, size_t bytestozero)); +#define FMEMZERO(target,size) jzero_far(target, size) +#endif +#endif + + +/* Compression module initialization routines */ +EXTERN(void) jinit_compress_master JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_c_master_control JPP((j_compress_ptr cinfo, + boolean transcode_only)); +EXTERN(void) jinit_c_main_controller JPP((j_compress_ptr cinfo, + boolean need_full_buffer)); +EXTERN(void) jinit_c_prep_controller JPP((j_compress_ptr cinfo, + boolean need_full_buffer)); +EXTERN(void) jinit_c_coef_controller JPP((j_compress_ptr cinfo, + boolean need_full_buffer)); +EXTERN(void) jinit_color_converter JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_downsampler JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_forward_dct JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_huff_encoder JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_arith_encoder JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_marker_writer JPP((j_compress_ptr cinfo)); +/* Decompression module initialization routines */ +EXTERN(void) jinit_master_decompress JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_d_main_controller JPP((j_decompress_ptr cinfo, + boolean need_full_buffer)); +EXTERN(void) jinit_d_coef_controller JPP((j_decompress_ptr cinfo, + boolean need_full_buffer)); +EXTERN(void) jinit_d_post_controller JPP((j_decompress_ptr cinfo, + boolean need_full_buffer)); +EXTERN(void) jinit_input_controller JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_marker_reader JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_huff_decoder JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_arith_decoder JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_inverse_dct JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_upsampler JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_color_deconverter JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_1pass_quantizer JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_2pass_quantizer JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_merged_upsampler JPP((j_decompress_ptr cinfo)); +/* Memory manager initialization */ +EXTERN(void) jinit_memory_mgr JPP((j_common_ptr cinfo)); + +/* Utility routines in jutils.c */ +EXTERN(long) jdiv_round_up JPP((long a, long b)); +EXTERN(long) jround_up JPP((long a, long b)); +EXTERN(void) jcopy_sample_rows JPP((JSAMPARRAY input_array, int source_row, + JSAMPARRAY output_array, int dest_row, + int num_rows, JDIMENSION num_cols)); +EXTERN(void) jcopy_block_row JPP((JBLOCKROW input_row, JBLOCKROW output_row, + JDIMENSION num_blocks)); +/* Constant tables in jutils.c */ +#if 0 /* This table is not actually needed in v6a */ +extern const int jpeg_zigzag_order[]; /* natural coef order to zigzag order */ +#endif +extern const int jpeg_natural_order[]; /* zigzag coef order to natural order */ +extern const int jpeg_natural_order7[]; /* zz to natural order for 7x7 block */ +extern const int jpeg_natural_order6[]; /* zz to natural order for 6x6 block */ +extern const int jpeg_natural_order5[]; /* zz to natural order for 5x5 block */ +extern const int jpeg_natural_order4[]; /* zz to natural order for 4x4 block */ +extern const int jpeg_natural_order3[]; /* zz to natural order for 3x3 block */ +extern const int jpeg_natural_order2[]; /* zz to natural order for 2x2 block */ + +/* Arithmetic coding probability estimation tables in jaricom.c */ +extern const INT32 jpeg_aritab[]; + +/* Suppress undefined-structure complaints if necessary. */ + +#ifdef INCOMPLETE_TYPES_BROKEN +#ifndef AM_MEMORY_MANAGER /* only jmemmgr.c defines these */ +struct jvirt_sarray_control { long dummy; }; +struct jvirt_barray_control { long dummy; }; +#endif +#endif /* INCOMPLETE_TYPES_BROKEN */ diff --git a/compat/libjpeg/jpeglib.h b/compat/libjpeg/jpeglib.h new file mode 100755 index 0000000..20ef353 --- /dev/null +++ b/compat/libjpeg/jpeglib.h @@ -0,0 +1,1180 @@ +/* + * jpeglib.h + * + * Copyright (C) 1991-1998, Thomas G. Lane. + * Modified 2002-2015 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file defines the application interface for the JPEG library. + * Most applications using the library need only include this file, + * and perhaps jerror.h if they want to know the exact error codes. + */ + +#ifndef JPEGLIB_H +#define JPEGLIB_H + +/* + * First we include the configuration files that record how this + * installation of the JPEG library is set up. jconfig.h can be + * generated automatically for many systems. jmorecfg.h contains + * manual configuration options that most people need not worry about. + */ + +#ifndef JCONFIG_INCLUDED /* in case jinclude.h already did */ +#include "jconfig.h" /* widely used configuration options */ +#endif +#include "jmorecfg.h" /* seldom changed options */ + + +#ifdef __cplusplus +#ifndef DONT_USE_EXTERN_C +extern "C" { +#endif +#endif + +/* Version IDs for the JPEG library. + * Might be useful for tests like "#if JPEG_LIB_VERSION >= 90". + */ + +#define JPEG_LIB_VERSION 90 /* Compatibility version 9.0 */ +#define JPEG_LIB_VERSION_MAJOR 9 +#define JPEG_LIB_VERSION_MINOR 2 + + +/* Various constants determining the sizes of things. + * All of these are specified by the JPEG standard, + * so don't change them if you want to be compatible. + */ + +#define DCTSIZE 8 /* The basic DCT block is 8x8 coefficients */ +#define DCTSIZE2 64 /* DCTSIZE squared; # of elements in a block */ +#define NUM_QUANT_TBLS 4 /* Quantization tables are numbered 0..3 */ +#define NUM_HUFF_TBLS 4 /* Huffman tables are numbered 0..3 */ +#define NUM_ARITH_TBLS 16 /* Arith-coding tables are numbered 0..15 */ +#define MAX_COMPS_IN_SCAN 4 /* JPEG limit on # of components in one scan */ +#define MAX_SAMP_FACTOR 4 /* JPEG limit on sampling factors */ +/* Unfortunately, some bozo at Adobe saw no reason to be bound by the standard; + * the PostScript DCT filter can emit files with many more than 10 blocks/MCU. + * If you happen to run across such a file, you can up D_MAX_BLOCKS_IN_MCU + * to handle it. We even let you do this from the jconfig.h file. However, + * we strongly discourage changing C_MAX_BLOCKS_IN_MCU; just because Adobe + * sometimes emits noncompliant files doesn't mean you should too. + */ +#define C_MAX_BLOCKS_IN_MCU 10 /* compressor's limit on blocks per MCU */ +#ifndef D_MAX_BLOCKS_IN_MCU +#define D_MAX_BLOCKS_IN_MCU 10 /* decompressor's limit on blocks per MCU */ +#endif + + +/* Data structures for images (arrays of samples and of DCT coefficients). + * On 80x86 machines, the image arrays are too big for near pointers, + * but the pointer arrays can fit in near memory. + */ + +typedef JSAMPLE FAR *JSAMPROW; /* ptr to one image row of pixel samples. */ +typedef JSAMPROW *JSAMPARRAY; /* ptr to some rows (a 2-D sample array) */ +typedef JSAMPARRAY *JSAMPIMAGE; /* a 3-D sample array: top index is color */ + +typedef JCOEF JBLOCK[DCTSIZE2]; /* one block of coefficients */ +typedef JBLOCK FAR *JBLOCKROW; /* pointer to one row of coefficient blocks */ +typedef JBLOCKROW *JBLOCKARRAY; /* a 2-D array of coefficient blocks */ +typedef JBLOCKARRAY *JBLOCKIMAGE; /* a 3-D array of coefficient blocks */ + +typedef JCOEF FAR *JCOEFPTR; /* useful in a couple of places */ + + +/* Types for JPEG compression parameters and working tables. */ + + +/* DCT coefficient quantization tables. */ + +typedef struct { + /* This array gives the coefficient quantizers in natural array order + * (not the zigzag order in which they are stored in a JPEG DQT marker). + * CAUTION: IJG versions prior to v6a kept this array in zigzag order. + */ + UINT16 quantval[DCTSIZE2]; /* quantization step for each coefficient */ + /* This field is used only during compression. It's initialized FALSE when + * the table is created, and set TRUE when it's been output to the file. + * You could suppress output of a table by setting this to TRUE. + * (See jpeg_suppress_tables for an example.) + */ + boolean sent_table; /* TRUE when table has been output */ +} JQUANT_TBL; + + +/* Huffman coding tables. */ + +typedef struct { + /* These two fields directly represent the contents of a JPEG DHT marker */ + UINT8 bits[17]; /* bits[k] = # of symbols with codes of */ + /* length k bits; bits[0] is unused */ + UINT8 huffval[256]; /* The symbols, in order of incr code length */ + /* This field is used only during compression. It's initialized FALSE when + * the table is created, and set TRUE when it's been output to the file. + * You could suppress output of a table by setting this to TRUE. + * (See jpeg_suppress_tables for an example.) + */ + boolean sent_table; /* TRUE when table has been output */ +} JHUFF_TBL; + + +/* Basic info about one component (color channel). */ + +typedef struct { + /* These values are fixed over the whole image. */ + /* For compression, they must be supplied by parameter setup; */ + /* for decompression, they are read from the SOF marker. */ + int component_id; /* identifier for this component (0..255) */ + int component_index; /* its index in SOF or cinfo->comp_info[] */ + int h_samp_factor; /* horizontal sampling factor (1..4) */ + int v_samp_factor; /* vertical sampling factor (1..4) */ + int quant_tbl_no; /* quantization table selector (0..3) */ + /* These values may vary between scans. */ + /* For compression, they must be supplied by parameter setup; */ + /* for decompression, they are read from the SOS marker. */ + /* The decompressor output side may not use these variables. */ + int dc_tbl_no; /* DC entropy table selector (0..3) */ + int ac_tbl_no; /* AC entropy table selector (0..3) */ + + /* Remaining fields should be treated as private by applications. */ + + /* These values are computed during compression or decompression startup: */ + /* Component's size in DCT blocks. + * Any dummy blocks added to complete an MCU are not counted; therefore + * these values do not depend on whether a scan is interleaved or not. + */ + JDIMENSION width_in_blocks; + JDIMENSION height_in_blocks; + /* Size of a DCT block in samples, + * reflecting any scaling we choose to apply during the DCT step. + * Values from 1 to 16 are supported. + * Note that different components may receive different DCT scalings. + */ + int DCT_h_scaled_size; + int DCT_v_scaled_size; + /* The downsampled dimensions are the component's actual, unpadded number + * of samples at the main buffer (preprocessing/compression interface); + * DCT scaling is included, so + * downsampled_width = + * ceil(image_width * Hi/Hmax * DCT_h_scaled_size/block_size) + * and similarly for height. + */ + JDIMENSION downsampled_width; /* actual width in samples */ + JDIMENSION downsampled_height; /* actual height in samples */ + /* For decompression, in cases where some of the components will be + * ignored (eg grayscale output from YCbCr image), we can skip most + * computations for the unused components. + * For compression, some of the components will need further quantization + * scale by factor of 2 after DCT (eg BG_YCC output from normal RGB input). + * The field is first set TRUE for decompression, FALSE for compression + * in initial_setup, and then adapted in color conversion setup. + */ + boolean component_needed; + + /* These values are computed before starting a scan of the component. */ + /* The decompressor output side may not use these variables. */ + int MCU_width; /* number of blocks per MCU, horizontally */ + int MCU_height; /* number of blocks per MCU, vertically */ + int MCU_blocks; /* MCU_width * MCU_height */ + int MCU_sample_width; /* MCU width in samples: MCU_width * DCT_h_scaled_size */ + int last_col_width; /* # of non-dummy blocks across in last MCU */ + int last_row_height; /* # of non-dummy blocks down in last MCU */ + + /* Saved quantization table for component; NULL if none yet saved. + * See jdinput.c comments about the need for this information. + * This field is currently used only for decompression. + */ + JQUANT_TBL * quant_table; + + /* Private per-component storage for DCT or IDCT subsystem. */ + void * dct_table; +} jpeg_component_info; + + +/* The script for encoding a multiple-scan file is an array of these: */ + +typedef struct { + int comps_in_scan; /* number of components encoded in this scan */ + int component_index[MAX_COMPS_IN_SCAN]; /* their SOF/comp_info[] indexes */ + int Ss, Se; /* progressive JPEG spectral selection parms */ + int Ah, Al; /* progressive JPEG successive approx. parms */ +} jpeg_scan_info; + +/* The decompressor can save APPn and COM markers in a list of these: */ + +typedef struct jpeg_marker_struct FAR * jpeg_saved_marker_ptr; + +struct jpeg_marker_struct { + jpeg_saved_marker_ptr next; /* next in list, or NULL */ + UINT8 marker; /* marker code: JPEG_COM, or JPEG_APP0+n */ + unsigned int original_length; /* # bytes of data in the file */ + unsigned int data_length; /* # bytes of data saved at data[] */ + JOCTET FAR * data; /* the data contained in the marker */ + /* the marker length word is not counted in data_length or original_length */ +}; + +/* Known color spaces. */ + +typedef enum { + JCS_UNKNOWN, /* error/unspecified */ + JCS_GRAYSCALE, /* monochrome */ + JCS_RGB, /* red/green/blue, standard RGB (sRGB) */ + JCS_YCbCr, /* Y/Cb/Cr (also known as YUV), standard YCC */ + JCS_CMYK, /* C/M/Y/K */ + JCS_YCCK, /* Y/Cb/Cr/K */ + JCS_BG_RGB, /* big gamut red/green/blue, bg-sRGB */ + JCS_BG_YCC /* big gamut Y/Cb/Cr, bg-sYCC */ +} J_COLOR_SPACE; + +/* Supported color transforms. */ + +typedef enum { + JCT_NONE = 0, + JCT_SUBTRACT_GREEN = 1 +} J_COLOR_TRANSFORM; + +/* DCT/IDCT algorithm options. */ + +typedef enum { + JDCT_ISLOW, /* slow but accurate integer algorithm */ + JDCT_IFAST, /* faster, less accurate integer method */ + JDCT_FLOAT /* floating-point: accurate, fast on fast HW */ +} J_DCT_METHOD; + +#ifndef JDCT_DEFAULT /* may be overridden in jconfig.h */ +#define JDCT_DEFAULT JDCT_ISLOW +#endif +#ifndef JDCT_FASTEST /* may be overridden in jconfig.h */ +#define JDCT_FASTEST JDCT_IFAST +#endif + +/* Dithering options for decompression. */ + +typedef enum { + JDITHER_NONE, /* no dithering */ + JDITHER_ORDERED, /* simple ordered dither */ + JDITHER_FS /* Floyd-Steinberg error diffusion dither */ +} J_DITHER_MODE; + + +/* Common fields between JPEG compression and decompression master structs. */ + +#define jpeg_common_fields \ + struct jpeg_error_mgr * err; /* Error handler module */\ + struct jpeg_memory_mgr * mem; /* Memory manager module */\ + struct jpeg_progress_mgr * progress; /* Progress monitor, or NULL if none */\ + void * client_data; /* Available for use by application */\ + boolean is_decompressor; /* So common code can tell which is which */\ + int global_state /* For checking call sequence validity */ + +/* Routines that are to be used by both halves of the library are declared + * to receive a pointer to this structure. There are no actual instances of + * jpeg_common_struct, only of jpeg_compress_struct and jpeg_decompress_struct. + */ +struct jpeg_common_struct { + jpeg_common_fields; /* Fields common to both master struct types */ + /* Additional fields follow in an actual jpeg_compress_struct or + * jpeg_decompress_struct. All three structs must agree on these + * initial fields! (This would be a lot cleaner in C++.) + */ +}; + +typedef struct jpeg_common_struct * j_common_ptr; +typedef struct jpeg_compress_struct * j_compress_ptr; +typedef struct jpeg_decompress_struct * j_decompress_ptr; + + +/* Master record for a compression instance */ + +struct jpeg_compress_struct { + jpeg_common_fields; /* Fields shared with jpeg_decompress_struct */ + + /* Destination for compressed data */ + struct jpeg_destination_mgr * dest; + + /* Description of source image --- these fields must be filled in by + * outer application before starting compression. in_color_space must + * be correct before you can even call jpeg_set_defaults(). + */ + + JDIMENSION image_width; /* input image width */ + JDIMENSION image_height; /* input image height */ + int input_components; /* # of color components in input image */ + J_COLOR_SPACE in_color_space; /* colorspace of input image */ + + double input_gamma; /* image gamma of input image */ + + /* Compression parameters --- these fields must be set before calling + * jpeg_start_compress(). We recommend calling jpeg_set_defaults() to + * initialize everything to reasonable defaults, then changing anything + * the application specifically wants to change. That way you won't get + * burnt when new parameters are added. Also note that there are several + * helper routines to simplify changing parameters. + */ + + unsigned int scale_num, scale_denom; /* fraction by which to scale image */ + + JDIMENSION jpeg_width; /* scaled JPEG image width */ + JDIMENSION jpeg_height; /* scaled JPEG image height */ + /* Dimensions of actual JPEG image that will be written to file, + * derived from input dimensions by scaling factors above. + * These fields are computed by jpeg_start_compress(). + * You can also use jpeg_calc_jpeg_dimensions() to determine these values + * in advance of calling jpeg_start_compress(). + */ + + int data_precision; /* bits of precision in image data */ + + int num_components; /* # of color components in JPEG image */ + J_COLOR_SPACE jpeg_color_space; /* colorspace of JPEG image */ + + jpeg_component_info * comp_info; + /* comp_info[i] describes component that appears i'th in SOF */ + + JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS]; + int q_scale_factor[NUM_QUANT_TBLS]; + /* ptrs to coefficient quantization tables, or NULL if not defined, + * and corresponding scale factors (percentage, initialized 100). + */ + + JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS]; + JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS]; + /* ptrs to Huffman coding tables, or NULL if not defined */ + + UINT8 arith_dc_L[NUM_ARITH_TBLS]; /* L values for DC arith-coding tables */ + UINT8 arith_dc_U[NUM_ARITH_TBLS]; /* U values for DC arith-coding tables */ + UINT8 arith_ac_K[NUM_ARITH_TBLS]; /* Kx values for AC arith-coding tables */ + + int num_scans; /* # of entries in scan_info array */ + const jpeg_scan_info * scan_info; /* script for multi-scan file, or NULL */ + /* The default value of scan_info is NULL, which causes a single-scan + * sequential JPEG file to be emitted. To create a multi-scan file, + * set num_scans and scan_info to point to an array of scan definitions. + */ + + boolean raw_data_in; /* TRUE=caller supplies downsampled data */ + boolean arith_code; /* TRUE=arithmetic coding, FALSE=Huffman */ + boolean optimize_coding; /* TRUE=optimize entropy encoding parms */ + boolean CCIR601_sampling; /* TRUE=first samples are cosited */ + boolean do_fancy_downsampling; /* TRUE=apply fancy downsampling */ + int smoothing_factor; /* 1..100, or 0 for no input smoothing */ + J_DCT_METHOD dct_method; /* DCT algorithm selector */ + + /* The restart interval can be specified in absolute MCUs by setting + * restart_interval, or in MCU rows by setting restart_in_rows + * (in which case the correct restart_interval will be figured + * for each scan). + */ + unsigned int restart_interval; /* MCUs per restart, or 0 for no restart */ + int restart_in_rows; /* if > 0, MCU rows per restart interval */ + + /* Parameters controlling emission of special markers. */ + + boolean write_JFIF_header; /* should a JFIF marker be written? */ + UINT8 JFIF_major_version; /* What to write for the JFIF version number */ + UINT8 JFIF_minor_version; + /* These three values are not used by the JPEG code, merely copied */ + /* into the JFIF APP0 marker. density_unit can be 0 for unknown, */ + /* 1 for dots/inch, or 2 for dots/cm. Note that the pixel aspect */ + /* ratio is defined by X_density/Y_density even when density_unit=0. */ + UINT8 density_unit; /* JFIF code for pixel size units */ + UINT16 X_density; /* Horizontal pixel density */ + UINT16 Y_density; /* Vertical pixel density */ + boolean write_Adobe_marker; /* should an Adobe marker be written? */ + + J_COLOR_TRANSFORM color_transform; + /* Color transform identifier, writes LSE marker if nonzero */ + + /* State variable: index of next scanline to be written to + * jpeg_write_scanlines(). Application may use this to control its + * processing loop, e.g., "while (next_scanline < image_height)". + */ + + JDIMENSION next_scanline; /* 0 .. image_height-1 */ + + /* Remaining fields are known throughout compressor, but generally + * should not be touched by a surrounding application. + */ + + /* + * These fields are computed during compression startup + */ + boolean progressive_mode; /* TRUE if scan script uses progressive mode */ + int max_h_samp_factor; /* largest h_samp_factor */ + int max_v_samp_factor; /* largest v_samp_factor */ + + int min_DCT_h_scaled_size; /* smallest DCT_h_scaled_size of any component */ + int min_DCT_v_scaled_size; /* smallest DCT_v_scaled_size of any component */ + + JDIMENSION total_iMCU_rows; /* # of iMCU rows to be input to coef ctlr */ + /* The coefficient controller receives data in units of MCU rows as defined + * for fully interleaved scans (whether the JPEG file is interleaved or not). + * There are v_samp_factor * DCTSIZE sample rows of each component in an + * "iMCU" (interleaved MCU) row. + */ + + /* + * These fields are valid during any one scan. + * They describe the components and MCUs actually appearing in the scan. + */ + int comps_in_scan; /* # of JPEG components in this scan */ + jpeg_component_info * cur_comp_info[MAX_COMPS_IN_SCAN]; + /* *cur_comp_info[i] describes component that appears i'th in SOS */ + + JDIMENSION MCUs_per_row; /* # of MCUs across the image */ + JDIMENSION MCU_rows_in_scan; /* # of MCU rows in the image */ + + int blocks_in_MCU; /* # of DCT blocks per MCU */ + int MCU_membership[C_MAX_BLOCKS_IN_MCU]; + /* MCU_membership[i] is index in cur_comp_info of component owning */ + /* i'th block in an MCU */ + + int Ss, Se, Ah, Al; /* progressive JPEG parameters for scan */ + + int block_size; /* the basic DCT block size: 1..16 */ + const int * natural_order; /* natural-order position array */ + int lim_Se; /* min( Se, DCTSIZE2-1 ) */ + + /* + * Links to compression subobjects (methods and private variables of modules) + */ + struct jpeg_comp_master * master; + struct jpeg_c_main_controller * main; + struct jpeg_c_prep_controller * prep; + struct jpeg_c_coef_controller * coef; + struct jpeg_marker_writer * marker; + struct jpeg_color_converter * cconvert; + struct jpeg_downsampler * downsample; + struct jpeg_forward_dct * fdct; + struct jpeg_entropy_encoder * entropy; + jpeg_scan_info * script_space; /* workspace for jpeg_simple_progression */ + int script_space_size; +}; + + +/* Master record for a decompression instance */ + +struct jpeg_decompress_struct { + jpeg_common_fields; /* Fields shared with jpeg_compress_struct */ + + /* Source of compressed data */ + struct jpeg_source_mgr * src; + + /* Basic description of image --- filled in by jpeg_read_header(). */ + /* Application may inspect these values to decide how to process image. */ + + JDIMENSION image_width; /* nominal image width (from SOF marker) */ + JDIMENSION image_height; /* nominal image height */ + int num_components; /* # of color components in JPEG image */ + J_COLOR_SPACE jpeg_color_space; /* colorspace of JPEG image */ + + /* Decompression processing parameters --- these fields must be set before + * calling jpeg_start_decompress(). Note that jpeg_read_header() initializes + * them to default values. + */ + + J_COLOR_SPACE out_color_space; /* colorspace for output */ + + unsigned int scale_num, scale_denom; /* fraction by which to scale image */ + + double output_gamma; /* image gamma wanted in output */ + + boolean buffered_image; /* TRUE=multiple output passes */ + boolean raw_data_out; /* TRUE=downsampled data wanted */ + + J_DCT_METHOD dct_method; /* IDCT algorithm selector */ + boolean do_fancy_upsampling; /* TRUE=apply fancy upsampling */ + boolean do_block_smoothing; /* TRUE=apply interblock smoothing */ + + boolean quantize_colors; /* TRUE=colormapped output wanted */ + /* the following are ignored if not quantize_colors: */ + J_DITHER_MODE dither_mode; /* type of color dithering to use */ + boolean two_pass_quantize; /* TRUE=use two-pass color quantization */ + int desired_number_of_colors; /* max # colors to use in created colormap */ + /* these are significant only in buffered-image mode: */ + boolean enable_1pass_quant; /* enable future use of 1-pass quantizer */ + boolean enable_external_quant;/* enable future use of external colormap */ + boolean enable_2pass_quant; /* enable future use of 2-pass quantizer */ + + /* Description of actual output image that will be returned to application. + * These fields are computed by jpeg_start_decompress(). + * You can also use jpeg_calc_output_dimensions() to determine these values + * in advance of calling jpeg_start_decompress(). + */ + + JDIMENSION output_width; /* scaled image width */ + JDIMENSION output_height; /* scaled image height */ + int out_color_components; /* # of color components in out_color_space */ + int output_components; /* # of color components returned */ + /* output_components is 1 (a colormap index) when quantizing colors; + * otherwise it equals out_color_components. + */ + int rec_outbuf_height; /* min recommended height of scanline buffer */ + /* If the buffer passed to jpeg_read_scanlines() is less than this many rows + * high, space and time will be wasted due to unnecessary data copying. + * Usually rec_outbuf_height will be 1 or 2, at most 4. + */ + + /* When quantizing colors, the output colormap is described by these fields. + * The application can supply a colormap by setting colormap non-NULL before + * calling jpeg_start_decompress; otherwise a colormap is created during + * jpeg_start_decompress or jpeg_start_output. + * The map has out_color_components rows and actual_number_of_colors columns. + */ + int actual_number_of_colors; /* number of entries in use */ + JSAMPARRAY colormap; /* The color map as a 2-D pixel array */ + + /* State variables: these variables indicate the progress of decompression. + * The application may examine these but must not modify them. + */ + + /* Row index of next scanline to be read from jpeg_read_scanlines(). + * Application may use this to control its processing loop, e.g., + * "while (output_scanline < output_height)". + */ + JDIMENSION output_scanline; /* 0 .. output_height-1 */ + + /* Current input scan number and number of iMCU rows completed in scan. + * These indicate the progress of the decompressor input side. + */ + int input_scan_number; /* Number of SOS markers seen so far */ + JDIMENSION input_iMCU_row; /* Number of iMCU rows completed */ + + /* The "output scan number" is the notional scan being displayed by the + * output side. The decompressor will not allow output scan/row number + * to get ahead of input scan/row, but it can fall arbitrarily far behind. + */ + int output_scan_number; /* Nominal scan number being displayed */ + JDIMENSION output_iMCU_row; /* Number of iMCU rows read */ + + /* Current progression status. coef_bits[c][i] indicates the precision + * with which component c's DCT coefficient i (in zigzag order) is known. + * It is -1 when no data has yet been received, otherwise it is the point + * transform (shift) value for the most recent scan of the coefficient + * (thus, 0 at completion of the progression). + * This pointer is NULL when reading a non-progressive file. + */ + int (*coef_bits)[DCTSIZE2]; /* -1 or current Al value for each coef */ + + /* Internal JPEG parameters --- the application usually need not look at + * these fields. Note that the decompressor output side may not use + * any parameters that can change between scans. + */ + + /* Quantization and Huffman tables are carried forward across input + * datastreams when processing abbreviated JPEG datastreams. + */ + + JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS]; + /* ptrs to coefficient quantization tables, or NULL if not defined */ + + JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS]; + JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS]; + /* ptrs to Huffman coding tables, or NULL if not defined */ + + /* These parameters are never carried across datastreams, since they + * are given in SOF/SOS markers or defined to be reset by SOI. + */ + + int data_precision; /* bits of precision in image data */ + + jpeg_component_info * comp_info; + /* comp_info[i] describes component that appears i'th in SOF */ + + boolean is_baseline; /* TRUE if Baseline SOF0 encountered */ + boolean progressive_mode; /* TRUE if SOFn specifies progressive mode */ + boolean arith_code; /* TRUE=arithmetic coding, FALSE=Huffman */ + + UINT8 arith_dc_L[NUM_ARITH_TBLS]; /* L values for DC arith-coding tables */ + UINT8 arith_dc_U[NUM_ARITH_TBLS]; /* U values for DC arith-coding tables */ + UINT8 arith_ac_K[NUM_ARITH_TBLS]; /* Kx values for AC arith-coding tables */ + + unsigned int restart_interval; /* MCUs per restart interval, or 0 for no restart */ + + /* These fields record data obtained from optional markers recognized by + * the JPEG library. + */ + boolean saw_JFIF_marker; /* TRUE iff a JFIF APP0 marker was found */ + /* Data copied from JFIF marker; only valid if saw_JFIF_marker is TRUE: */ + UINT8 JFIF_major_version; /* JFIF version number */ + UINT8 JFIF_minor_version; + UINT8 density_unit; /* JFIF code for pixel size units */ + UINT16 X_density; /* Horizontal pixel density */ + UINT16 Y_density; /* Vertical pixel density */ + boolean saw_Adobe_marker; /* TRUE iff an Adobe APP14 marker was found */ + UINT8 Adobe_transform; /* Color transform code from Adobe marker */ + + J_COLOR_TRANSFORM color_transform; + /* Color transform identifier derived from LSE marker, otherwise zero */ + + boolean CCIR601_sampling; /* TRUE=first samples are cosited */ + + /* Aside from the specific data retained from APPn markers known to the + * library, the uninterpreted contents of any or all APPn and COM markers + * can be saved in a list for examination by the application. + */ + jpeg_saved_marker_ptr marker_list; /* Head of list of saved markers */ + + /* Remaining fields are known throughout decompressor, but generally + * should not be touched by a surrounding application. + */ + + /* + * These fields are computed during decompression startup + */ + int max_h_samp_factor; /* largest h_samp_factor */ + int max_v_samp_factor; /* largest v_samp_factor */ + + int min_DCT_h_scaled_size; /* smallest DCT_h_scaled_size of any component */ + int min_DCT_v_scaled_size; /* smallest DCT_v_scaled_size of any component */ + + JDIMENSION total_iMCU_rows; /* # of iMCU rows in image */ + /* The coefficient controller's input and output progress is measured in + * units of "iMCU" (interleaved MCU) rows. These are the same as MCU rows + * in fully interleaved JPEG scans, but are used whether the scan is + * interleaved or not. We define an iMCU row as v_samp_factor DCT block + * rows of each component. Therefore, the IDCT output contains + * v_samp_factor*DCT_v_scaled_size sample rows of a component per iMCU row. + */ + + JSAMPLE * sample_range_limit; /* table for fast range-limiting */ + + /* + * These fields are valid during any one scan. + * They describe the components and MCUs actually appearing in the scan. + * Note that the decompressor output side must not use these fields. + */ + int comps_in_scan; /* # of JPEG components in this scan */ + jpeg_component_info * cur_comp_info[MAX_COMPS_IN_SCAN]; + /* *cur_comp_info[i] describes component that appears i'th in SOS */ + + JDIMENSION MCUs_per_row; /* # of MCUs across the image */ + JDIMENSION MCU_rows_in_scan; /* # of MCU rows in the image */ + + int blocks_in_MCU; /* # of DCT blocks per MCU */ + int MCU_membership[D_MAX_BLOCKS_IN_MCU]; + /* MCU_membership[i] is index in cur_comp_info of component owning */ + /* i'th block in an MCU */ + + int Ss, Se, Ah, Al; /* progressive JPEG parameters for scan */ + + /* These fields are derived from Se of first SOS marker. + */ + int block_size; /* the basic DCT block size: 1..16 */ + const int * natural_order; /* natural-order position array for entropy decode */ + int lim_Se; /* min( Se, DCTSIZE2-1 ) for entropy decode */ + + /* This field is shared between entropy decoder and marker parser. + * It is either zero or the code of a JPEG marker that has been + * read from the data source, but has not yet been processed. + */ + int unread_marker; + + /* + * Links to decompression subobjects (methods, private variables of modules) + */ + struct jpeg_decomp_master * master; + struct jpeg_d_main_controller * main; + struct jpeg_d_coef_controller * coef; + struct jpeg_d_post_controller * post; + struct jpeg_input_controller * inputctl; + struct jpeg_marker_reader * marker; + struct jpeg_entropy_decoder * entropy; + struct jpeg_inverse_dct * idct; + struct jpeg_upsampler * upsample; + struct jpeg_color_deconverter * cconvert; + struct jpeg_color_quantizer * cquantize; +}; + + +/* "Object" declarations for JPEG modules that may be supplied or called + * directly by the surrounding application. + * As with all objects in the JPEG library, these structs only define the + * publicly visible methods and state variables of a module. Additional + * private fields may exist after the public ones. + */ + + +/* Error handler object */ + +struct jpeg_error_mgr { + /* Error exit handler: does not return to caller */ + JMETHOD(noreturn_t, error_exit, (j_common_ptr cinfo)); + /* Conditionally emit a trace or warning message */ + JMETHOD(void, emit_message, (j_common_ptr cinfo, int msg_level)); + /* Routine that actually outputs a trace or error message */ + JMETHOD(void, output_message, (j_common_ptr cinfo)); + /* Format a message string for the most recent JPEG error or message */ + JMETHOD(void, format_message, (j_common_ptr cinfo, char * buffer)); +#define JMSG_LENGTH_MAX 200 /* recommended size of format_message buffer */ + /* Reset error state variables at start of a new image */ + JMETHOD(void, reset_error_mgr, (j_common_ptr cinfo)); + + /* The message ID code and any parameters are saved here. + * A message can have one string parameter or up to 8 int parameters. + */ + int msg_code; +#define JMSG_STR_PARM_MAX 80 + union { + int i[8]; + char s[JMSG_STR_PARM_MAX]; + } msg_parm; + + /* Standard state variables for error facility */ + + int trace_level; /* max msg_level that will be displayed */ + + /* For recoverable corrupt-data errors, we emit a warning message, + * but keep going unless emit_message chooses to abort. emit_message + * should count warnings in num_warnings. The surrounding application + * can check for bad data by seeing if num_warnings is nonzero at the + * end of processing. + */ + long num_warnings; /* number of corrupt-data warnings */ + + /* These fields point to the table(s) of error message strings. + * An application can change the table pointer to switch to a different + * message list (typically, to change the language in which errors are + * reported). Some applications may wish to add additional error codes + * that will be handled by the JPEG library error mechanism; the second + * table pointer is used for this purpose. + * + * First table includes all errors generated by JPEG library itself. + * Error code 0 is reserved for a "no such error string" message. + */ + const char * const * jpeg_message_table; /* Library errors */ + int last_jpeg_message; /* Table contains strings 0..last_jpeg_message */ + /* Second table can be added by application (see cjpeg/djpeg for example). + * It contains strings numbered first_addon_message..last_addon_message. + */ + const char * const * addon_message_table; /* Non-library errors */ + int first_addon_message; /* code for first string in addon table */ + int last_addon_message; /* code for last string in addon table */ +}; + + +/* Progress monitor object */ + +struct jpeg_progress_mgr { + JMETHOD(void, progress_monitor, (j_common_ptr cinfo)); + + long pass_counter; /* work units completed in this pass */ + long pass_limit; /* total number of work units in this pass */ + int completed_passes; /* passes completed so far */ + int total_passes; /* total number of passes expected */ +}; + + +/* Data destination object for compression */ + +struct jpeg_destination_mgr { + JOCTET * next_output_byte; /* => next byte to write in buffer */ + size_t free_in_buffer; /* # of byte spaces remaining in buffer */ + + JMETHOD(void, init_destination, (j_compress_ptr cinfo)); + JMETHOD(boolean, empty_output_buffer, (j_compress_ptr cinfo)); + JMETHOD(void, term_destination, (j_compress_ptr cinfo)); +}; + + +/* Data source object for decompression */ + +struct jpeg_source_mgr { + const JOCTET * next_input_byte; /* => next byte to read from buffer */ + size_t bytes_in_buffer; /* # of bytes remaining in buffer */ + + JMETHOD(void, init_source, (j_decompress_ptr cinfo)); + JMETHOD(boolean, fill_input_buffer, (j_decompress_ptr cinfo)); + JMETHOD(void, skip_input_data, (j_decompress_ptr cinfo, long num_bytes)); + JMETHOD(boolean, resync_to_restart, (j_decompress_ptr cinfo, int desired)); + JMETHOD(void, term_source, (j_decompress_ptr cinfo)); +}; + + +/* Memory manager object. + * Allocates "small" objects (a few K total), "large" objects (tens of K), + * and "really big" objects (virtual arrays with backing store if needed). + * The memory manager does not allow individual objects to be freed; rather, + * each created object is assigned to a pool, and whole pools can be freed + * at once. This is faster and more convenient than remembering exactly what + * to free, especially where malloc()/free() are not too speedy. + * NB: alloc routines never return NULL. They exit to error_exit if not + * successful. + */ + +#define JPOOL_PERMANENT 0 /* lasts until master record is destroyed */ +#define JPOOL_IMAGE 1 /* lasts until done with image/datastream */ +#define JPOOL_NUMPOOLS 2 + +typedef struct jvirt_sarray_control * jvirt_sarray_ptr; +typedef struct jvirt_barray_control * jvirt_barray_ptr; + + +struct jpeg_memory_mgr { + /* Method pointers */ + JMETHOD(void *, alloc_small, (j_common_ptr cinfo, int pool_id, + size_t sizeofobject)); + JMETHOD(void FAR *, alloc_large, (j_common_ptr cinfo, int pool_id, + size_t sizeofobject)); + JMETHOD(JSAMPARRAY, alloc_sarray, (j_common_ptr cinfo, int pool_id, + JDIMENSION samplesperrow, + JDIMENSION numrows)); + JMETHOD(JBLOCKARRAY, alloc_barray, (j_common_ptr cinfo, int pool_id, + JDIMENSION blocksperrow, + JDIMENSION numrows)); + JMETHOD(jvirt_sarray_ptr, request_virt_sarray, (j_common_ptr cinfo, + int pool_id, + boolean pre_zero, + JDIMENSION samplesperrow, + JDIMENSION numrows, + JDIMENSION maxaccess)); + JMETHOD(jvirt_barray_ptr, request_virt_barray, (j_common_ptr cinfo, + int pool_id, + boolean pre_zero, + JDIMENSION blocksperrow, + JDIMENSION numrows, + JDIMENSION maxaccess)); + JMETHOD(void, realize_virt_arrays, (j_common_ptr cinfo)); + JMETHOD(JSAMPARRAY, access_virt_sarray, (j_common_ptr cinfo, + jvirt_sarray_ptr ptr, + JDIMENSION start_row, + JDIMENSION num_rows, + boolean writable)); + JMETHOD(JBLOCKARRAY, access_virt_barray, (j_common_ptr cinfo, + jvirt_barray_ptr ptr, + JDIMENSION start_row, + JDIMENSION num_rows, + boolean writable)); + JMETHOD(void, free_pool, (j_common_ptr cinfo, int pool_id)); + JMETHOD(void, self_destruct, (j_common_ptr cinfo)); + + /* Limit on memory allocation for this JPEG object. (Note that this is + * merely advisory, not a guaranteed maximum; it only affects the space + * used for virtual-array buffers.) May be changed by outer application + * after creating the JPEG object. + */ + long max_memory_to_use; + + /* Maximum allocation request accepted by alloc_large. */ + long max_alloc_chunk; +}; + + +/* Routine signature for application-supplied marker processing methods. + * Need not pass marker code since it is stored in cinfo->unread_marker. + */ +typedef JMETHOD(boolean, jpeg_marker_parser_method, (j_decompress_ptr cinfo)); + + +/* Declarations for routines called by application. + * The JPP macro hides prototype parameters from compilers that can't cope. + * Note JPP requires double parentheses. + */ + +#ifdef HAVE_PROTOTYPES +#define JPP(arglist) arglist +#else +#define JPP(arglist) () +#endif + + +/* Short forms of external names for systems with brain-damaged linkers. + * We shorten external names to be unique in the first six letters, which + * is good enough for all known systems. + * (If your compiler itself needs names to be unique in less than 15 + * characters, you are out of luck. Get a better compiler.) + */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jpeg_std_error jStdError +#define jpeg_CreateCompress jCreaCompress +#define jpeg_CreateDecompress jCreaDecompress +#define jpeg_destroy_compress jDestCompress +#define jpeg_destroy_decompress jDestDecompress +#define jpeg_stdio_dest jStdDest +#define jpeg_stdio_src jStdSrc +#define jpeg_mem_dest jMemDest +#define jpeg_mem_src jMemSrc +#define jpeg_set_defaults jSetDefaults +#define jpeg_set_colorspace jSetColorspace +#define jpeg_default_colorspace jDefColorspace +#define jpeg_set_quality jSetQuality +#define jpeg_set_linear_quality jSetLQuality +#define jpeg_default_qtables jDefQTables +#define jpeg_add_quant_table jAddQuantTable +#define jpeg_quality_scaling jQualityScaling +#define jpeg_simple_progression jSimProgress +#define jpeg_suppress_tables jSuppressTables +#define jpeg_alloc_quant_table jAlcQTable +#define jpeg_alloc_huff_table jAlcHTable +#define jpeg_start_compress jStrtCompress +#define jpeg_write_scanlines jWrtScanlines +#define jpeg_finish_compress jFinCompress +#define jpeg_calc_jpeg_dimensions jCjpegDimensions +#define jpeg_write_raw_data jWrtRawData +#define jpeg_write_marker jWrtMarker +#define jpeg_write_m_header jWrtMHeader +#define jpeg_write_m_byte jWrtMByte +#define jpeg_write_tables jWrtTables +#define jpeg_read_header jReadHeader +#define jpeg_start_decompress jStrtDecompress +#define jpeg_read_scanlines jReadScanlines +#define jpeg_finish_decompress jFinDecompress +#define jpeg_read_raw_data jReadRawData +#define jpeg_has_multiple_scans jHasMultScn +#define jpeg_start_output jStrtOutput +#define jpeg_finish_output jFinOutput +#define jpeg_input_complete jInComplete +#define jpeg_new_colormap jNewCMap +#define jpeg_consume_input jConsumeInput +#define jpeg_core_output_dimensions jCoreDimensions +#define jpeg_calc_output_dimensions jCalcDimensions +#define jpeg_save_markers jSaveMarkers +#define jpeg_set_marker_processor jSetMarker +#define jpeg_read_coefficients jReadCoefs +#define jpeg_write_coefficients jWrtCoefs +#define jpeg_copy_critical_parameters jCopyCrit +#define jpeg_abort_compress jAbrtCompress +#define jpeg_abort_decompress jAbrtDecompress +#define jpeg_abort jAbort +#define jpeg_destroy jDestroy +#define jpeg_resync_to_restart jResyncRestart +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + + +/* Default error-management setup */ +EXTERN(struct jpeg_error_mgr *) jpeg_std_error + JPP((struct jpeg_error_mgr * err)); + +/* Initialization of JPEG compression objects. + * jpeg_create_compress() and jpeg_create_decompress() are the exported + * names that applications should call. These expand to calls on + * jpeg_CreateCompress and jpeg_CreateDecompress with additional information + * passed for version mismatch checking. + * NB: you must set up the error-manager BEFORE calling jpeg_create_xxx. + */ +#define jpeg_create_compress(cinfo) \ + jpeg_CreateCompress((cinfo), JPEG_LIB_VERSION, \ + (size_t) sizeof(struct jpeg_compress_struct)) +#define jpeg_create_decompress(cinfo) \ + jpeg_CreateDecompress((cinfo), JPEG_LIB_VERSION, \ + (size_t) sizeof(struct jpeg_decompress_struct)) +EXTERN(void) jpeg_CreateCompress JPP((j_compress_ptr cinfo, + int version, size_t structsize)); +EXTERN(void) jpeg_CreateDecompress JPP((j_decompress_ptr cinfo, + int version, size_t structsize)); +/* Destruction of JPEG compression objects */ +EXTERN(void) jpeg_destroy_compress JPP((j_compress_ptr cinfo)); +EXTERN(void) jpeg_destroy_decompress JPP((j_decompress_ptr cinfo)); + +/* Standard data source and destination managers: stdio streams. */ +/* Caller is responsible for opening the file before and closing after. */ +EXTERN(void) jpeg_stdio_dest JPP((j_compress_ptr cinfo, FILE * outfile)); +EXTERN(void) jpeg_stdio_src JPP((j_decompress_ptr cinfo, FILE * infile)); + +/* Data source and destination managers: memory buffers. */ +EXTERN(void) jpeg_mem_dest JPP((j_compress_ptr cinfo, + unsigned char ** outbuffer, + unsigned long * outsize)); +EXTERN(void) jpeg_mem_src JPP((j_decompress_ptr cinfo, + const unsigned char * inbuffer, + unsigned long insize)); + +/* Default parameter setup for compression */ +EXTERN(void) jpeg_set_defaults JPP((j_compress_ptr cinfo)); +/* Compression parameter setup aids */ +EXTERN(void) jpeg_set_colorspace JPP((j_compress_ptr cinfo, + J_COLOR_SPACE colorspace)); +EXTERN(void) jpeg_default_colorspace JPP((j_compress_ptr cinfo)); +EXTERN(void) jpeg_set_quality JPP((j_compress_ptr cinfo, int quality, + boolean force_baseline)); +EXTERN(void) jpeg_set_linear_quality JPP((j_compress_ptr cinfo, + int scale_factor, + boolean force_baseline)); +EXTERN(void) jpeg_default_qtables JPP((j_compress_ptr cinfo, + boolean force_baseline)); +EXTERN(void) jpeg_add_quant_table JPP((j_compress_ptr cinfo, int which_tbl, + const unsigned int *basic_table, + int scale_factor, + boolean force_baseline)); +EXTERN(int) jpeg_quality_scaling JPP((int quality)); +EXTERN(void) jpeg_simple_progression JPP((j_compress_ptr cinfo)); +EXTERN(void) jpeg_suppress_tables JPP((j_compress_ptr cinfo, + boolean suppress)); +EXTERN(JQUANT_TBL *) jpeg_alloc_quant_table JPP((j_common_ptr cinfo)); +EXTERN(JHUFF_TBL *) jpeg_alloc_huff_table JPP((j_common_ptr cinfo)); + +/* Main entry points for compression */ +EXTERN(void) jpeg_start_compress JPP((j_compress_ptr cinfo, + boolean write_all_tables)); +EXTERN(JDIMENSION) jpeg_write_scanlines JPP((j_compress_ptr cinfo, + JSAMPARRAY scanlines, + JDIMENSION num_lines)); +EXTERN(void) jpeg_finish_compress JPP((j_compress_ptr cinfo)); + +/* Precalculate JPEG dimensions for current compression parameters. */ +EXTERN(void) jpeg_calc_jpeg_dimensions JPP((j_compress_ptr cinfo)); + +/* Replaces jpeg_write_scanlines when writing raw downsampled data. */ +EXTERN(JDIMENSION) jpeg_write_raw_data JPP((j_compress_ptr cinfo, + JSAMPIMAGE data, + JDIMENSION num_lines)); + +/* Write a special marker. See libjpeg.txt concerning safe usage. */ +EXTERN(void) jpeg_write_marker + JPP((j_compress_ptr cinfo, int marker, + const JOCTET * dataptr, unsigned int datalen)); +/* Same, but piecemeal. */ +EXTERN(void) jpeg_write_m_header + JPP((j_compress_ptr cinfo, int marker, unsigned int datalen)); +EXTERN(void) jpeg_write_m_byte + JPP((j_compress_ptr cinfo, int val)); + +/* Alternate compression function: just write an abbreviated table file */ +EXTERN(void) jpeg_write_tables JPP((j_compress_ptr cinfo)); + +/* Decompression startup: read start of JPEG datastream to see what's there */ +EXTERN(int) jpeg_read_header JPP((j_decompress_ptr cinfo, + boolean require_image)); +/* Return value is one of: */ +#define JPEG_SUSPENDED 0 /* Suspended due to lack of input data */ +#define JPEG_HEADER_OK 1 /* Found valid image datastream */ +#define JPEG_HEADER_TABLES_ONLY 2 /* Found valid table-specs-only datastream */ +/* If you pass require_image = TRUE (normal case), you need not check for + * a TABLES_ONLY return code; an abbreviated file will cause an error exit. + * JPEG_SUSPENDED is only possible if you use a data source module that can + * give a suspension return (the stdio source module doesn't). + */ + +/* Main entry points for decompression */ +EXTERN(boolean) jpeg_start_decompress JPP((j_decompress_ptr cinfo)); +EXTERN(JDIMENSION) jpeg_read_scanlines JPP((j_decompress_ptr cinfo, + JSAMPARRAY scanlines, + JDIMENSION max_lines)); +EXTERN(boolean) jpeg_finish_decompress JPP((j_decompress_ptr cinfo)); + +/* Replaces jpeg_read_scanlines when reading raw downsampled data. */ +EXTERN(JDIMENSION) jpeg_read_raw_data JPP((j_decompress_ptr cinfo, + JSAMPIMAGE data, + JDIMENSION max_lines)); + +/* Additional entry points for buffered-image mode. */ +EXTERN(boolean) jpeg_has_multiple_scans JPP((j_decompress_ptr cinfo)); +EXTERN(boolean) jpeg_start_output JPP((j_decompress_ptr cinfo, + int scan_number)); +EXTERN(boolean) jpeg_finish_output JPP((j_decompress_ptr cinfo)); +EXTERN(boolean) jpeg_input_complete JPP((j_decompress_ptr cinfo)); +EXTERN(void) jpeg_new_colormap JPP((j_decompress_ptr cinfo)); +EXTERN(int) jpeg_consume_input JPP((j_decompress_ptr cinfo)); +/* Return value is one of: */ +/* #define JPEG_SUSPENDED 0 Suspended due to lack of input data */ +#define JPEG_REACHED_SOS 1 /* Reached start of new scan */ +#define JPEG_REACHED_EOI 2 /* Reached end of image */ +#define JPEG_ROW_COMPLETED 3 /* Completed one iMCU row */ +#define JPEG_SCAN_COMPLETED 4 /* Completed last iMCU row of a scan */ + +/* Precalculate output dimensions for current decompression parameters. */ +EXTERN(void) jpeg_core_output_dimensions JPP((j_decompress_ptr cinfo)); +EXTERN(void) jpeg_calc_output_dimensions JPP((j_decompress_ptr cinfo)); + +/* Control saving of COM and APPn markers into marker_list. */ +EXTERN(void) jpeg_save_markers + JPP((j_decompress_ptr cinfo, int marker_code, + unsigned int length_limit)); + +/* Install a special processing method for COM or APPn markers. */ +EXTERN(void) jpeg_set_marker_processor + JPP((j_decompress_ptr cinfo, int marker_code, + jpeg_marker_parser_method routine)); + +/* Read or write raw DCT coefficients --- useful for lossless transcoding. */ +EXTERN(jvirt_barray_ptr *) jpeg_read_coefficients JPP((j_decompress_ptr cinfo)); +EXTERN(void) jpeg_write_coefficients JPP((j_compress_ptr cinfo, + jvirt_barray_ptr * coef_arrays)); +EXTERN(void) jpeg_copy_critical_parameters JPP((j_decompress_ptr srcinfo, + j_compress_ptr dstinfo)); + +/* If you choose to abort compression or decompression before completing + * jpeg_finish_(de)compress, then you need to clean up to release memory, + * temporary files, etc. You can just call jpeg_destroy_(de)compress + * if you're done with the JPEG object, but if you want to clean it up and + * reuse it, call this: + */ +EXTERN(void) jpeg_abort_compress JPP((j_compress_ptr cinfo)); +EXTERN(void) jpeg_abort_decompress JPP((j_decompress_ptr cinfo)); + +/* Generic versions of jpeg_abort and jpeg_destroy that work on either + * flavor of JPEG object. These may be more convenient in some places. + */ +EXTERN(void) jpeg_abort JPP((j_common_ptr cinfo)); +EXTERN(void) jpeg_destroy JPP((j_common_ptr cinfo)); + +/* Default restart-marker-resync procedure for use by data source modules */ +EXTERN(boolean) jpeg_resync_to_restart JPP((j_decompress_ptr cinfo, + int desired)); + + +/* These marker codes are exported since applications and data source modules + * are likely to want to use them. + */ + +#define JPEG_RST0 0xD0 /* RST0 marker code */ +#define JPEG_EOI 0xD9 /* EOI marker code */ +#define JPEG_APP0 0xE0 /* APP0 marker code */ +#define JPEG_COM 0xFE /* COM marker code */ + + +/* If we have a brain-damaged compiler that emits warnings (or worse, errors) + * for structure definitions that are never filled in, keep it quiet by + * supplying dummy definitions for the various substructures. + */ + +#ifdef INCOMPLETE_TYPES_BROKEN +#ifndef JPEG_INTERNALS /* will be defined in jpegint.h */ +struct jvirt_sarray_control { long dummy; }; +struct jvirt_barray_control { long dummy; }; +struct jpeg_comp_master { long dummy; }; +struct jpeg_c_main_controller { long dummy; }; +struct jpeg_c_prep_controller { long dummy; }; +struct jpeg_c_coef_controller { long dummy; }; +struct jpeg_marker_writer { long dummy; }; +struct jpeg_color_converter { long dummy; }; +struct jpeg_downsampler { long dummy; }; +struct jpeg_forward_dct { long dummy; }; +struct jpeg_entropy_encoder { long dummy; }; +struct jpeg_decomp_master { long dummy; }; +struct jpeg_d_main_controller { long dummy; }; +struct jpeg_d_coef_controller { long dummy; }; +struct jpeg_d_post_controller { long dummy; }; +struct jpeg_input_controller { long dummy; }; +struct jpeg_marker_reader { long dummy; }; +struct jpeg_entropy_decoder { long dummy; }; +struct jpeg_inverse_dct { long dummy; }; +struct jpeg_upsampler { long dummy; }; +struct jpeg_color_deconverter { long dummy; }; +struct jpeg_color_quantizer { long dummy; }; +#endif /* JPEG_INTERNALS */ +#endif /* INCOMPLETE_TYPES_BROKEN */ + + +/* + * The JPEG library modules define JPEG_INTERNALS before including this file. + * The internal structure declarations are read only when that is true. + * Applications using the library should not include jpegint.h, but may wish + * to include jerror.h. + */ + +#ifdef JPEG_INTERNALS +#include "jpegint.h" /* fetch private declarations */ +#include "jerror.h" /* fetch error codes too */ +#endif + +#ifdef __cplusplus +#ifndef DONT_USE_EXTERN_C +} +#endif +#endif + +#endif /* JPEGLIB_H */ diff --git a/compat/libjpeg/jpegtran.1 b/compat/libjpeg/jpegtran.1 new file mode 100755 index 0000000..e3e7c92 --- /dev/null +++ b/compat/libjpeg/jpegtran.1 @@ -0,0 +1,303 @@ +.TH JPEGTRAN 1 "20 September 2015" +.SH NAME +jpegtran \- lossless transformation of JPEG files +.SH SYNOPSIS +.B jpegtran +[ +.I options +] +[ +.I filename +] +.LP +.SH DESCRIPTION +.LP +.B jpegtran +performs various useful transformations of JPEG files. +It can translate the coded representation from one variant of JPEG to another, +for example from baseline JPEG to progressive JPEG or vice versa. It can also +perform some rearrangements of the image data, for example turning an image +from landscape to portrait format by rotation. +.PP +For EXIF files and JPEG files containing Exif data, you may prefer to use +.B exiftran +instead. +.PP +.B jpegtran +works by rearranging the compressed data (DCT coefficients), without +ever fully decoding the image. Therefore, its transformations are lossless: +there is no image degradation at all, which would not be true if you used +.B djpeg +followed by +.B cjpeg +to accomplish the same conversion. But by the same token, +.B jpegtran +cannot perform lossy operations such as changing the image quality. However, +while the image data is losslessly transformed, metadata can be removed. See +the +.B \-copy +option for specifics. +.PP +.B jpegtran +reads the named JPEG/JFIF file, or the standard input if no file is +named, and produces a JPEG/JFIF file on the standard output. +.SH OPTIONS +All switch names may be abbreviated; for example, +.B \-optimize +may be written +.B \-opt +or +.BR \-o . +Upper and lower case are equivalent. +British spellings are also accepted (e.g., +.BR \-optimise ), +though for brevity these are not mentioned below. +.PP +To specify the coded JPEG representation used in the output file, +.B jpegtran +accepts a subset of the switches recognized by +.BR cjpeg : +.TP +.B \-optimize +Perform optimization of entropy encoding parameters. +.TP +.B \-progressive +Create progressive JPEG file. +.TP +.BI \-restart " N" +Emit a JPEG restart marker every N MCU rows, or every N MCU blocks if "B" is +attached to the number. +.TP +.B \-arithmetic +Use arithmetic coding. +.TP +.BI \-scans " file" +Use the scan script given in the specified text file. +.PP +See +.BR cjpeg (1) +for more details about these switches. +If you specify none of these switches, you get a plain baseline-JPEG output +file. The quality setting and so forth are determined by the input file. +.PP +The image can be losslessly transformed by giving one of these switches: +.TP +.B \-flip horizontal +Mirror image horizontally (left-right). +.TP +.B \-flip vertical +Mirror image vertically (top-bottom). +.TP +.B \-rotate 90 +Rotate image 90 degrees clockwise. +.TP +.B \-rotate 180 +Rotate image 180 degrees. +.TP +.B \-rotate 270 +Rotate image 270 degrees clockwise (or 90 ccw). +.TP +.B \-transpose +Transpose image (across UL-to-LR axis). +.TP +.B \-transverse +Transverse transpose (across UR-to-LL axis). +.IP +The transpose transformation has no restrictions regarding image dimensions. +The other transformations operate rather oddly if the image dimensions are not +a multiple of the iMCU size (usually 8 or 16 pixels), because they can only +transform complete blocks of DCT coefficient data in the desired way. +.IP +.BR jpegtran 's +default behavior when transforming an odd-size image is designed +to preserve exact reversibility and mathematical consistency of the +transformation set. As stated, transpose is able to flip the entire image +area. Horizontal mirroring leaves any partial iMCU column at the right edge +untouched, but is able to flip all rows of the image. Similarly, vertical +mirroring leaves any partial iMCU row at the bottom edge untouched, but is +able to flip all columns. The other transforms can be built up as sequences +of transpose and flip operations; for consistency, their actions on edge +pixels are defined to be the same as the end result of the corresponding +transpose-and-flip sequence. +.IP +For practical use, you may prefer to discard any untransformable edge pixels +rather than having a strange-looking strip along the right and/or bottom edges +of a transformed image. To do this, add the +.B \-trim +switch: +.TP +.B \-trim +Drop non-transformable edge blocks. +.IP +Obviously, a transformation with +.B \-trim +is not reversible, so strictly speaking +.B jpegtran +with this switch is not lossless. Also, the expected mathematical +equivalences between the transformations no longer hold. For example, +.B \-rot 270 -trim +trims only the bottom edge, but +.B \-rot 90 -trim +followed by +.B \-rot 180 -trim +trims both edges. +.IP +If you are only interested in perfect transformation, add the +.B \-perfect +switch: +.TP +.B \-perfect +Fails with an error if the transformation is not perfect. +.IP +For example you may want to do +.IP +.B (jpegtran \-rot 90 -perfect +.I foo.jpg +.B || djpeg +.I foo.jpg +.B | pnmflip \-r90 | cjpeg) +.IP +to do a perfect rotation if available or an approximated one if not. +.PP +We also offer a lossless-crop option, which discards data outside a given +image region but losslessly preserves what is inside. Like the rotate and +flip transforms, lossless crop is restricted by the current JPEG format: the +upper left corner of the selected region must fall on an iMCU boundary. If +this does not hold for the given crop parameters, we silently move the upper +left corner up and/or left to make it so, simultaneously increasing the +region dimensions to keep the lower right crop corner unchanged. (Thus, the +output image covers at least the requested region, but may cover more.) +The adjustment of the region dimensions may be optionally disabled by +attaching an 'f' character ("force") to the width or height number. + +The image can be losslessly cropped by giving the switch: +.TP +.B \-crop WxH+X+Y +Crop to a rectangular subarea of width W, height H starting at point X,Y. +.PP +A complementary lossless-wipe option is provided to discard (gray out) data +inside a given image region while losslessly preserving what is outside: +.TP +.B \-wipe WxH+X+Y +Wipe (gray out) a rectangular subarea of width W, height H starting at point +X,Y. +.PP +Other not-strictly-lossless transformation switches are: +.TP +.B \-grayscale +Force grayscale output. +.IP +This option discards the chrominance channels if the input image is YCbCr +(ie, a standard color JPEG), resulting in a grayscale JPEG file. The +luminance channel is preserved exactly, so this is a better method of reducing +to grayscale than decompression, conversion, and recompression. This switch +is particularly handy for fixing a monochrome picture that was mistakenly +encoded as a color JPEG. (In such a case, the space savings from getting rid +of the near-empty chroma channels won't be large; but the decoding time for +a grayscale JPEG is substantially less than that for a color JPEG.) +.TP +.BI \-scale " M/N" +Scale the output image by a factor M/N. +.IP +Currently supported scale factors are M/N with all M from 1 to 16, where N is +the source DCT size, which is 8 for baseline JPEG. If the /N part is omitted, +then M specifies the DCT scaled size to be applied on the given input. For +baseline JPEG this is equivalent to M/8 scaling, since the source DCT size +for baseline JPEG is 8. +.B Caution: +An implementation of the JPEG SmartScale extension is required for this +feature. SmartScale enabled JPEG is not yet widely implemented, so many +decoders will be unable to view a SmartScale extended JPEG file at all. +.PP +.B jpegtran +also recognizes these switches that control what to do with "extra" markers, +such as comment blocks: +.TP +.B \-copy none +Copy no extra markers from source file. This setting suppresses all +comments and other metadata in the source file. +.TP +.B \-copy comments +Copy only comment markers. This setting copies comments from the source file, +but discards any other metadata. +.TP +.B \-copy all +Copy all extra markers. This setting preserves metadata +found in the source file, such as JFIF thumbnails, Exif data, and Photoshop +settings. In some files these extra markers can be sizable. Note that this +option will copy thumbnails as-is; they will not be transformed. +.IP +The default behavior is +.BR "\-copy comments" . +(Note: in IJG releases v6 and v6a, +.B jpegtran +always did the equivalent of +.BR "\-copy none" .) +.PP +Additional switches recognized by jpegtran are: +.TP +.BI \-maxmemory " N" +Set limit for amount of memory to use in processing large images. Value is +in thousands of bytes, or millions of bytes if "M" is attached to the +number. For example, +.B \-max 4m +selects 4000000 bytes. If more space is needed, temporary files will be used. +.TP +.BI \-outfile " name" +Send output image to the named file, not to standard output. +.TP +.B \-verbose +Enable debug printout. More +.BR \-v 's +give more output. Also, version information is printed at startup. +.TP +.B \-debug +Same as +.BR \-verbose . +.SH EXAMPLES +.LP +This example converts a baseline JPEG file to progressive form: +.IP +.B jpegtran \-progressive +.I foo.jpg +.B > +.I fooprog.jpg +.PP +This example rotates an image 90 degrees clockwise, discarding any +unrotatable edge pixels: +.IP +.B jpegtran \-rot 90 -trim +.I foo.jpg +.B > +.I foo90.jpg +.SH ENVIRONMENT +.TP +.B JPEGMEM +If this environment variable is set, its value is the default memory limit. +The value is specified as described for the +.B \-maxmemory +switch. +.B JPEGMEM +overrides the default value specified when the program was compiled, and +itself is overridden by an explicit +.BR \-maxmemory . +.SH SEE ALSO +.BR cjpeg (1), +.BR djpeg (1), +.BR rdjpgcom (1), +.BR wrjpgcom (1) +.br +Wallace, Gregory K. "The JPEG Still Picture Compression Standard", +Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44. +.SH AUTHOR +Independent JPEG Group +.SH BUGS +The transform options can't transform odd-size images perfectly. Use +.B \-trim +or +.B \-perfect +if you don't like the results. +.PP +The entire image is read into memory and then written out again, even in +cases where this isn't really necessary. Expect swapping on large images, +especially when using the more complex transform options. diff --git a/compat/libjpeg/jpegtran.c b/compat/libjpeg/jpegtran.c new file mode 100755 index 0000000..f3175ae --- /dev/null +++ b/compat/libjpeg/jpegtran.c @@ -0,0 +1,577 @@ +/* + * jpegtran.c + * + * Copyright (C) 1995-2013, Thomas G. Lane, Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a command-line user interface for JPEG transcoding. + * It is very similar to cjpeg.c, and partly to djpeg.c, but provides + * lossless transcoding between different JPEG file formats. It also + * provides some lossless and sort-of-lossless transformations of JPEG data. + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ +#include "transupp.h" /* Support routines for jpegtran */ +#include "jversion.h" /* for version message */ + +#ifdef USE_CCOMMAND /* command-line reader for Macintosh */ +#ifdef __MWERKS__ +#include /* Metrowerks needs this */ +#include /* ... and this */ +#endif +#ifdef THINK_C +#include /* Think declares it here */ +#endif +#endif + + +/* + * Argument-parsing code. + * The switch parser is designed to be useful with DOS-style command line + * syntax, ie, intermixed switches and file names, where only the switches + * to the left of a given file name affect processing of that file. + * The main program in this file doesn't actually use this capability... + */ + + +static const char * progname; /* program name for error messages */ +static char * outfilename; /* for -outfile switch */ +static char * scaleoption; /* -scale switch */ +static JCOPY_OPTION copyoption; /* -copy switch */ +static jpeg_transform_info transformoption; /* image transformation options */ + + +LOCAL(void) +usage (void) +/* complain about bad command line */ +{ + fprintf(stderr, "usage: %s [switches] ", progname); +#ifdef TWO_FILE_COMMANDLINE + fprintf(stderr, "inputfile outputfile\n"); +#else + fprintf(stderr, "[inputfile]\n"); +#endif + + fprintf(stderr, "Switches (names may be abbreviated):\n"); + fprintf(stderr, " -copy none Copy no extra markers from source file\n"); + fprintf(stderr, " -copy comments Copy only comment markers (default)\n"); + fprintf(stderr, " -copy all Copy all extra markers\n"); +#ifdef ENTROPY_OPT_SUPPORTED + fprintf(stderr, " -optimize Optimize Huffman table (smaller file, but slow compression)\n"); +#endif +#ifdef C_PROGRESSIVE_SUPPORTED + fprintf(stderr, " -progressive Create progressive JPEG file\n"); +#endif + fprintf(stderr, "Switches for modifying the image:\n"); +#if TRANSFORMS_SUPPORTED + fprintf(stderr, " -crop WxH+X+Y Crop to a rectangular subarea\n"); + fprintf(stderr, " -flip [horizontal|vertical] Mirror image (left-right or top-bottom)\n"); + fprintf(stderr, " -grayscale Reduce to grayscale (omit color data)\n"); + fprintf(stderr, " -perfect Fail if there is non-transformable edge blocks\n"); + fprintf(stderr, " -rotate [90|180|270] Rotate image (degrees clockwise)\n"); +#endif + fprintf(stderr, " -scale M/N Scale output image by fraction M/N, eg, 1/8\n"); +#if TRANSFORMS_SUPPORTED + fprintf(stderr, " -transpose Transpose image\n"); + fprintf(stderr, " -transverse Transverse transpose image\n"); + fprintf(stderr, " -trim Drop non-transformable edge blocks\n"); + fprintf(stderr, " -wipe WxH+X+Y Wipe (gray out) a rectangular subarea\n"); +#endif + fprintf(stderr, "Switches for advanced users:\n"); +#ifdef C_ARITH_CODING_SUPPORTED + fprintf(stderr, " -arithmetic Use arithmetic coding\n"); +#endif + fprintf(stderr, " -restart N Set restart interval in rows, or in blocks with B\n"); + fprintf(stderr, " -maxmemory N Maximum memory to use (in kbytes)\n"); + fprintf(stderr, " -outfile name Specify name for output file\n"); + fprintf(stderr, " -verbose or -debug Emit debug output\n"); + fprintf(stderr, "Switches for wizards:\n"); +#ifdef C_MULTISCAN_FILES_SUPPORTED + fprintf(stderr, " -scans file Create multi-scan JPEG per script file\n"); +#endif + exit(EXIT_FAILURE); +} + + +LOCAL(void) +select_transform (JXFORM_CODE transform) +/* Silly little routine to detect multiple transform options, + * which we can't handle. + */ +{ +#if TRANSFORMS_SUPPORTED + if (transformoption.transform == JXFORM_NONE || + transformoption.transform == transform) { + transformoption.transform = transform; + } else { + fprintf(stderr, "%s: can only do one image transformation at a time\n", + progname); + usage(); + } +#else + fprintf(stderr, "%s: sorry, image transformation was not compiled\n", + progname); + exit(EXIT_FAILURE); +#endif +} + + +LOCAL(int) +parse_switches (j_compress_ptr cinfo, int argc, char **argv, + int last_file_arg_seen, boolean for_real) +/* Parse optional switches. + * Returns argv[] index of first file-name argument (== argc if none). + * Any file names with indexes <= last_file_arg_seen are ignored; + * they have presumably been processed in a previous iteration. + * (Pass 0 for last_file_arg_seen on the first or only iteration.) + * for_real is FALSE on the first (dummy) pass; we may skip any expensive + * processing. + */ +{ + int argn; + char * arg; + boolean simple_progressive; + char * scansarg = NULL; /* saves -scans parm if any */ + + /* Set up default JPEG parameters. */ + simple_progressive = FALSE; + outfilename = NULL; + scaleoption = NULL; + copyoption = JCOPYOPT_DEFAULT; + transformoption.transform = JXFORM_NONE; + transformoption.perfect = FALSE; + transformoption.trim = FALSE; + transformoption.force_grayscale = FALSE; + transformoption.crop = FALSE; + cinfo->err->trace_level = 0; + + /* Scan command line options, adjust parameters */ + + for (argn = 1; argn < argc; argn++) { + arg = argv[argn]; + if (*arg != '-') { + /* Not a switch, must be a file name argument */ + if (argn <= last_file_arg_seen) { + outfilename = NULL; /* -outfile applies to just one input file */ + continue; /* ignore this name if previously processed */ + } + break; /* else done parsing switches */ + } + arg++; /* advance past switch marker character */ + + if (keymatch(arg, "arithmetic", 1)) { + /* Use arithmetic coding. */ +#ifdef C_ARITH_CODING_SUPPORTED + cinfo->arith_code = TRUE; +#else + fprintf(stderr, "%s: sorry, arithmetic coding not supported\n", + progname); + exit(EXIT_FAILURE); +#endif + + } else if (keymatch(arg, "copy", 2)) { + /* Select which extra markers to copy. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + if (keymatch(argv[argn], "none", 1)) { + copyoption = JCOPYOPT_NONE; + } else if (keymatch(argv[argn], "comments", 1)) { + copyoption = JCOPYOPT_COMMENTS; + } else if (keymatch(argv[argn], "all", 1)) { + copyoption = JCOPYOPT_ALL; + } else + usage(); + + } else if (keymatch(arg, "crop", 2)) { + /* Perform lossless cropping. */ +#if TRANSFORMS_SUPPORTED + if (++argn >= argc) /* advance to next argument */ + usage(); + if (transformoption.crop /* reject multiple crop/wipe requests */ || + ! jtransform_parse_crop_spec(&transformoption, argv[argn])) { + fprintf(stderr, "%s: bogus -crop argument '%s'\n", + progname, argv[argn]); + exit(EXIT_FAILURE); + } +#else + select_transform(JXFORM_NONE); /* force an error */ +#endif + + } else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) { + /* Enable debug printouts. */ + /* On first -d, print version identification */ + static boolean printed_version = FALSE; + + if (! printed_version) { + fprintf(stderr, "Independent JPEG Group's JPEGTRAN, version %s\n%s\n", + JVERSION, JCOPYRIGHT); + printed_version = TRUE; + } + cinfo->err->trace_level++; + + } else if (keymatch(arg, "flip", 1)) { + /* Mirror left-right or top-bottom. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + if (keymatch(argv[argn], "horizontal", 1)) + select_transform(JXFORM_FLIP_H); + else if (keymatch(argv[argn], "vertical", 1)) + select_transform(JXFORM_FLIP_V); + else + usage(); + + } else if (keymatch(arg, "grayscale", 1) || keymatch(arg, "greyscale",1)) { + /* Force to grayscale. */ +#if TRANSFORMS_SUPPORTED + transformoption.force_grayscale = TRUE; +#else + select_transform(JXFORM_NONE); /* force an error */ +#endif + + } else if (keymatch(arg, "maxmemory", 3)) { + /* Maximum memory in Kb (or Mb with 'm'). */ + long lval; + char ch = 'x'; + + if (++argn >= argc) /* advance to next argument */ + usage(); + if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1) + usage(); + if (ch == 'm' || ch == 'M') + lval *= 1000L; + cinfo->mem->max_memory_to_use = lval * 1000L; + + } else if (keymatch(arg, "optimize", 1) || keymatch(arg, "optimise", 1)) { + /* Enable entropy parm optimization. */ +#ifdef ENTROPY_OPT_SUPPORTED + cinfo->optimize_coding = TRUE; +#else + fprintf(stderr, "%s: sorry, entropy optimization was not compiled\n", + progname); + exit(EXIT_FAILURE); +#endif + + } else if (keymatch(arg, "outfile", 4)) { + /* Set output file name. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + outfilename = argv[argn]; /* save it away for later use */ + + } else if (keymatch(arg, "perfect", 2)) { + /* Fail if there is any partial edge MCUs that the transform can't + * handle. */ + transformoption.perfect = TRUE; + + } else if (keymatch(arg, "progressive", 2)) { + /* Select simple progressive mode. */ +#ifdef C_PROGRESSIVE_SUPPORTED + simple_progressive = TRUE; + /* We must postpone execution until num_components is known. */ +#else + fprintf(stderr, "%s: sorry, progressive output was not compiled\n", + progname); + exit(EXIT_FAILURE); +#endif + + } else if (keymatch(arg, "restart", 1)) { + /* Restart interval in MCU rows (or in MCUs with 'b'). */ + long lval; + char ch = 'x'; + + if (++argn >= argc) /* advance to next argument */ + usage(); + if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1) + usage(); + if (lval < 0 || lval > 65535L) + usage(); + if (ch == 'b' || ch == 'B') { + cinfo->restart_interval = (unsigned int) lval; + cinfo->restart_in_rows = 0; /* else prior '-restart n' overrides me */ + } else { + cinfo->restart_in_rows = (int) lval; + /* restart_interval will be computed during startup */ + } + + } else if (keymatch(arg, "rotate", 2)) { + /* Rotate 90, 180, or 270 degrees (measured clockwise). */ + if (++argn >= argc) /* advance to next argument */ + usage(); + if (keymatch(argv[argn], "90", 2)) + select_transform(JXFORM_ROT_90); + else if (keymatch(argv[argn], "180", 3)) + select_transform(JXFORM_ROT_180); + else if (keymatch(argv[argn], "270", 3)) + select_transform(JXFORM_ROT_270); + else + usage(); + + } else if (keymatch(arg, "scale", 4)) { + /* Scale the output image by a fraction M/N. */ + if (++argn >= argc) /* advance to next argument */ + usage(); + scaleoption = argv[argn]; + /* We must postpone processing until decompression startup. */ + + } else if (keymatch(arg, "scans", 1)) { + /* Set scan script. */ +#ifdef C_MULTISCAN_FILES_SUPPORTED + if (++argn >= argc) /* advance to next argument */ + usage(); + scansarg = argv[argn]; + /* We must postpone reading the file in case -progressive appears. */ +#else + fprintf(stderr, "%s: sorry, multi-scan output was not compiled\n", + progname); + exit(EXIT_FAILURE); +#endif + + } else if (keymatch(arg, "transpose", 1)) { + /* Transpose (across UL-to-LR axis). */ + select_transform(JXFORM_TRANSPOSE); + + } else if (keymatch(arg, "transverse", 6)) { + /* Transverse transpose (across UR-to-LL axis). */ + select_transform(JXFORM_TRANSVERSE); + + } else if (keymatch(arg, "trim", 3)) { + /* Trim off any partial edge MCUs that the transform can't handle. */ + transformoption.trim = TRUE; + + } else if (keymatch(arg, "wipe", 1)) { +#if TRANSFORMS_SUPPORTED + if (++argn >= argc) /* advance to next argument */ + usage(); + if (transformoption.crop /* reject multiple crop/wipe requests */ || + ! jtransform_parse_crop_spec(&transformoption, argv[argn])) { + fprintf(stderr, "%s: bogus -wipe argument '%s'\n", + progname, argv[argn]); + exit(EXIT_FAILURE); + } + select_transform(JXFORM_WIPE); +#else + select_transform(JXFORM_NONE); /* force an error */ +#endif + + } else { + usage(); /* bogus switch */ + } + } + + /* Post-switch-scanning cleanup */ + + if (for_real) { + +#ifdef C_PROGRESSIVE_SUPPORTED + if (simple_progressive) /* process -progressive; -scans can override */ + jpeg_simple_progression(cinfo); +#endif + +#ifdef C_MULTISCAN_FILES_SUPPORTED + if (scansarg != NULL) /* process -scans if it was present */ + if (! read_scan_script(cinfo, scansarg)) + usage(); +#endif + } + + return argn; /* return index of next arg (file name) */ +} + + +/* + * The main program. + */ + +int +main (int argc, char **argv) +{ + struct jpeg_decompress_struct srcinfo; + struct jpeg_compress_struct dstinfo; + struct jpeg_error_mgr jsrcerr, jdsterr; +#ifdef PROGRESS_REPORT + struct cdjpeg_progress_mgr progress; +#endif + jvirt_barray_ptr * src_coef_arrays; + jvirt_barray_ptr * dst_coef_arrays; + int file_index; + /* We assume all-in-memory processing and can therefore use only a + * single file pointer for sequential input and output operation. + */ + FILE * fp; + + /* On Mac, fetch a command line. */ +#ifdef USE_CCOMMAND + argc = ccommand(&argv); +#endif + + progname = argv[0]; + if (progname == NULL || progname[0] == 0) + progname = "jpegtran"; /* in case C library doesn't provide it */ + + /* Initialize the JPEG decompression object with default error handling. */ + srcinfo.err = jpeg_std_error(&jsrcerr); + jpeg_create_decompress(&srcinfo); + /* Initialize the JPEG compression object with default error handling. */ + dstinfo.err = jpeg_std_error(&jdsterr); + jpeg_create_compress(&dstinfo); + + /* Now safe to enable signal catcher. + * Note: we assume only the decompression object will have virtual arrays. + */ +#ifdef NEED_SIGNAL_CATCHER + enable_signal_catcher((j_common_ptr) &srcinfo); +#endif + + /* Scan command line to find file names. + * It is convenient to use just one switch-parsing routine, but the switch + * values read here are mostly ignored; we will rescan the switches after + * opening the input file. Also note that most of the switches affect the + * destination JPEG object, so we parse into that and then copy over what + * needs to affects the source too. + */ + + file_index = parse_switches(&dstinfo, argc, argv, 0, FALSE); + jsrcerr.trace_level = jdsterr.trace_level; + srcinfo.mem->max_memory_to_use = dstinfo.mem->max_memory_to_use; + +#ifdef TWO_FILE_COMMANDLINE + /* Must have either -outfile switch or explicit output file name */ + if (outfilename == NULL) { + if (file_index != argc-2) { + fprintf(stderr, "%s: must name one input and one output file\n", + progname); + usage(); + } + outfilename = argv[file_index+1]; + } else { + if (file_index != argc-1) { + fprintf(stderr, "%s: must name one input and one output file\n", + progname); + usage(); + } + } +#else + /* Unix style: expect zero or one file name */ + if (file_index < argc-1) { + fprintf(stderr, "%s: only one input file\n", progname); + usage(); + } +#endif /* TWO_FILE_COMMANDLINE */ + + /* Open the input file. */ + if (file_index < argc) { + if ((fp = fopen(argv[file_index], READ_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open %s for reading\n", progname, argv[file_index]); + exit(EXIT_FAILURE); + } + } else { + /* default input file is stdin */ + fp = read_stdin(); + } + +#ifdef PROGRESS_REPORT + start_progress_monitor((j_common_ptr) &dstinfo, &progress); +#endif + + /* Specify data source for decompression */ + jpeg_stdio_src(&srcinfo, fp); + + /* Enable saving of extra markers that we want to copy */ + jcopy_markers_setup(&srcinfo, copyoption); + + /* Read file header */ + (void) jpeg_read_header(&srcinfo, TRUE); + + /* Adjust default decompression parameters */ + if (scaleoption != NULL) + if (sscanf(scaleoption, "%u/%u", + &srcinfo.scale_num, &srcinfo.scale_denom) < 1) + usage(); + + /* Any space needed by a transform option must be requested before + * jpeg_read_coefficients so that memory allocation will be done right. + */ +#if TRANSFORMS_SUPPORTED + /* Fail right away if -perfect is given and transformation is not perfect. + */ + if (!jtransform_request_workspace(&srcinfo, &transformoption)) { + fprintf(stderr, "%s: transformation is not perfect\n", progname); + exit(EXIT_FAILURE); + } +#endif + + /* Read source file as DCT coefficients */ + src_coef_arrays = jpeg_read_coefficients(&srcinfo); + + /* Initialize destination compression parameters from source values */ + jpeg_copy_critical_parameters(&srcinfo, &dstinfo); + + /* Adjust destination parameters if required by transform options; + * also find out which set of coefficient arrays will hold the output. + */ +#if TRANSFORMS_SUPPORTED + dst_coef_arrays = jtransform_adjust_parameters(&srcinfo, &dstinfo, + src_coef_arrays, + &transformoption); +#else + dst_coef_arrays = src_coef_arrays; +#endif + + /* Close input file, if we opened it. + * Note: we assume that jpeg_read_coefficients consumed all input + * until JPEG_REACHED_EOI, and that jpeg_finish_decompress will + * only consume more while (! cinfo->inputctl->eoi_reached). + * We cannot call jpeg_finish_decompress here since we still need the + * virtual arrays allocated from the source object for processing. + */ + if (fp != stdin) + fclose(fp); + + /* Open the output file. */ + if (outfilename != NULL) { + if ((fp = fopen(outfilename, WRITE_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open %s for writing\n", progname, outfilename); + exit(EXIT_FAILURE); + } + } else { + /* default output file is stdout */ + fp = write_stdout(); + } + + /* Adjust default compression parameters by re-parsing the options */ + file_index = parse_switches(&dstinfo, argc, argv, 0, TRUE); + + /* Specify data destination for compression */ + jpeg_stdio_dest(&dstinfo, fp); + + /* Start compressor (note no image data is actually written here) */ + jpeg_write_coefficients(&dstinfo, dst_coef_arrays); + + /* Copy to the output file any extra markers that we want to preserve */ + jcopy_markers_execute(&srcinfo, &dstinfo, copyoption); + + /* Execute image transformation, if any */ +#if TRANSFORMS_SUPPORTED + jtransform_execute_transformation(&srcinfo, &dstinfo, + src_coef_arrays, + &transformoption); +#endif + + /* Finish compression and release memory */ + jpeg_finish_compress(&dstinfo); + jpeg_destroy_compress(&dstinfo); + (void) jpeg_finish_decompress(&srcinfo); + jpeg_destroy_decompress(&srcinfo); + + /* Close output file, if we opened it */ + if (fp != stdout) + fclose(fp); + +#ifdef PROGRESS_REPORT + end_progress_monitor((j_common_ptr) &dstinfo); +#endif + + /* All done. */ + exit(jsrcerr.num_warnings + jdsterr.num_warnings ?EXIT_WARNING:EXIT_SUCCESS); + return 0; /* suppress no-return-value warnings */ +} diff --git a/compat/libjpeg/jquant1.c b/compat/libjpeg/jquant1.c new file mode 100755 index 0000000..1c482bc --- /dev/null +++ b/compat/libjpeg/jquant1.c @@ -0,0 +1,857 @@ +/* + * jquant1.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * Modified 2011 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains 1-pass color quantization (color mapping) routines. + * These routines provide mapping to a fixed color map using equally spaced + * color values. Optional Floyd-Steinberg or ordered dithering is available. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + +#ifdef QUANT_1PASS_SUPPORTED + + +/* + * The main purpose of 1-pass quantization is to provide a fast, if not very + * high quality, colormapped output capability. A 2-pass quantizer usually + * gives better visual quality; however, for quantized grayscale output this + * quantizer is perfectly adequate. Dithering is highly recommended with this + * quantizer, though you can turn it off if you really want to. + * + * In 1-pass quantization the colormap must be chosen in advance of seeing the + * image. We use a map consisting of all combinations of Ncolors[i] color + * values for the i'th component. The Ncolors[] values are chosen so that + * their product, the total number of colors, is no more than that requested. + * (In most cases, the product will be somewhat less.) + * + * Since the colormap is orthogonal, the representative value for each color + * component can be determined without considering the other components; + * then these indexes can be combined into a colormap index by a standard + * N-dimensional-array-subscript calculation. Most of the arithmetic involved + * can be precalculated and stored in the lookup table colorindex[]. + * colorindex[i][j] maps pixel value j in component i to the nearest + * representative value (grid plane) for that component; this index is + * multiplied by the array stride for component i, so that the + * index of the colormap entry closest to a given pixel value is just + * sum( colorindex[component-number][pixel-component-value] ) + * Aside from being fast, this scheme allows for variable spacing between + * representative values with no additional lookup cost. + * + * If gamma correction has been applied in color conversion, it might be wise + * to adjust the color grid spacing so that the representative colors are + * equidistant in linear space. At this writing, gamma correction is not + * implemented by jdcolor, so nothing is done here. + */ + + +/* Declarations for ordered dithering. + * + * We use a standard 16x16 ordered dither array. The basic concept of ordered + * dithering is described in many references, for instance Dale Schumacher's + * chapter II.2 of Graphics Gems II (James Arvo, ed. Academic Press, 1991). + * In place of Schumacher's comparisons against a "threshold" value, we add a + * "dither" value to the input pixel and then round the result to the nearest + * output value. The dither value is equivalent to (0.5 - threshold) times + * the distance between output values. For ordered dithering, we assume that + * the output colors are equally spaced; if not, results will probably be + * worse, since the dither may be too much or too little at a given point. + * + * The normal calculation would be to form pixel value + dither, range-limit + * this to 0..MAXJSAMPLE, and then index into the colorindex table as usual. + * We can skip the separate range-limiting step by extending the colorindex + * table in both directions. + */ + +#define ODITHER_SIZE 16 /* dimension of dither matrix */ +/* NB: if ODITHER_SIZE is not a power of 2, ODITHER_MASK uses will break */ +#define ODITHER_CELLS (ODITHER_SIZE*ODITHER_SIZE) /* # cells in matrix */ +#define ODITHER_MASK (ODITHER_SIZE-1) /* mask for wrapping around counters */ + +typedef int ODITHER_MATRIX[ODITHER_SIZE][ODITHER_SIZE]; +typedef int (*ODITHER_MATRIX_PTR)[ODITHER_SIZE]; + +static const UINT8 base_dither_matrix[ODITHER_SIZE][ODITHER_SIZE] = { + /* Bayer's order-4 dither array. Generated by the code given in + * Stephen Hawley's article "Ordered Dithering" in Graphics Gems I. + * The values in this array must range from 0 to ODITHER_CELLS-1. + */ + { 0,192, 48,240, 12,204, 60,252, 3,195, 51,243, 15,207, 63,255 }, + { 128, 64,176,112,140, 76,188,124,131, 67,179,115,143, 79,191,127 }, + { 32,224, 16,208, 44,236, 28,220, 35,227, 19,211, 47,239, 31,223 }, + { 160, 96,144, 80,172,108,156, 92,163, 99,147, 83,175,111,159, 95 }, + { 8,200, 56,248, 4,196, 52,244, 11,203, 59,251, 7,199, 55,247 }, + { 136, 72,184,120,132, 68,180,116,139, 75,187,123,135, 71,183,119 }, + { 40,232, 24,216, 36,228, 20,212, 43,235, 27,219, 39,231, 23,215 }, + { 168,104,152, 88,164,100,148, 84,171,107,155, 91,167,103,151, 87 }, + { 2,194, 50,242, 14,206, 62,254, 1,193, 49,241, 13,205, 61,253 }, + { 130, 66,178,114,142, 78,190,126,129, 65,177,113,141, 77,189,125 }, + { 34,226, 18,210, 46,238, 30,222, 33,225, 17,209, 45,237, 29,221 }, + { 162, 98,146, 82,174,110,158, 94,161, 97,145, 81,173,109,157, 93 }, + { 10,202, 58,250, 6,198, 54,246, 9,201, 57,249, 5,197, 53,245 }, + { 138, 74,186,122,134, 70,182,118,137, 73,185,121,133, 69,181,117 }, + { 42,234, 26,218, 38,230, 22,214, 41,233, 25,217, 37,229, 21,213 }, + { 170,106,154, 90,166,102,150, 86,169,105,153, 89,165,101,149, 85 } +}; + + +/* Declarations for Floyd-Steinberg dithering. + * + * Errors are accumulated into the array fserrors[], at a resolution of + * 1/16th of a pixel count. The error at a given pixel is propagated + * to its not-yet-processed neighbors using the standard F-S fractions, + * ... (here) 7/16 + * 3/16 5/16 1/16 + * We work left-to-right on even rows, right-to-left on odd rows. + * + * We can get away with a single array (holding one row's worth of errors) + * by using it to store the current row's errors at pixel columns not yet + * processed, but the next row's errors at columns already processed. We + * need only a few extra variables to hold the errors immediately around the + * current column. (If we are lucky, those variables are in registers, but + * even if not, they're probably cheaper to access than array elements are.) + * + * The fserrors[] array is indexed [component#][position]. + * We provide (#columns + 2) entries per component; the extra entry at each + * end saves us from special-casing the first and last pixels. + * + * Note: on a wide image, we might not have enough room in a PC's near data + * segment to hold the error array; so it is allocated with alloc_large. + */ + +#if BITS_IN_JSAMPLE == 8 +typedef INT16 FSERROR; /* 16 bits should be enough */ +typedef int LOCFSERROR; /* use 'int' for calculation temps */ +#else +typedef INT32 FSERROR; /* may need more than 16 bits */ +typedef INT32 LOCFSERROR; /* be sure calculation temps are big enough */ +#endif + +typedef FSERROR FAR *FSERRPTR; /* pointer to error array (in FAR storage!) */ + + +/* Private subobject */ + +#define MAX_Q_COMPS 4 /* max components I can handle */ + +typedef struct { + struct jpeg_color_quantizer pub; /* public fields */ + + /* Initially allocated colormap is saved here */ + JSAMPARRAY sv_colormap; /* The color map as a 2-D pixel array */ + int sv_actual; /* number of entries in use */ + + JSAMPARRAY colorindex; /* Precomputed mapping for speed */ + /* colorindex[i][j] = index of color closest to pixel value j in component i, + * premultiplied as described above. Since colormap indexes must fit into + * JSAMPLEs, the entries of this array will too. + */ + boolean is_padded; /* is the colorindex padded for odither? */ + + int Ncolors[MAX_Q_COMPS]; /* # of values alloced to each component */ + + /* Variables for ordered dithering */ + int row_index; /* cur row's vertical index in dither matrix */ + ODITHER_MATRIX_PTR odither[MAX_Q_COMPS]; /* one dither array per component */ + + /* Variables for Floyd-Steinberg dithering */ + FSERRPTR fserrors[MAX_Q_COMPS]; /* accumulated errors */ + boolean on_odd_row; /* flag to remember which row we are on */ +} my_cquantizer; + +typedef my_cquantizer * my_cquantize_ptr; + + +/* + * Policy-making subroutines for create_colormap and create_colorindex. + * These routines determine the colormap to be used. The rest of the module + * only assumes that the colormap is orthogonal. + * + * * select_ncolors decides how to divvy up the available colors + * among the components. + * * output_value defines the set of representative values for a component. + * * largest_input_value defines the mapping from input values to + * representative values for a component. + * Note that the latter two routines may impose different policies for + * different components, though this is not currently done. + */ + + +LOCAL(int) +select_ncolors (j_decompress_ptr cinfo, int Ncolors[]) +/* Determine allocation of desired colors to components, */ +/* and fill in Ncolors[] array to indicate choice. */ +/* Return value is total number of colors (product of Ncolors[] values). */ +{ + int nc = cinfo->out_color_components; /* number of color components */ + int max_colors = cinfo->desired_number_of_colors; + int total_colors, iroot, i, j; + boolean changed; + long temp; + static const int RGB_order[3] = { RGB_GREEN, RGB_RED, RGB_BLUE }; + + /* We can allocate at least the nc'th root of max_colors per component. */ + /* Compute floor(nc'th root of max_colors). */ + iroot = 1; + do { + iroot++; + temp = iroot; /* set temp = iroot ** nc */ + for (i = 1; i < nc; i++) + temp *= iroot; + } while (temp <= (long) max_colors); /* repeat till iroot exceeds root */ + iroot--; /* now iroot = floor(root) */ + + /* Must have at least 2 color values per component */ + if (iroot < 2) + ERREXIT1(cinfo, JERR_QUANT_FEW_COLORS, (int) temp); + + /* Initialize to iroot color values for each component */ + total_colors = 1; + for (i = 0; i < nc; i++) { + Ncolors[i] = iroot; + total_colors *= iroot; + } + /* We may be able to increment the count for one or more components without + * exceeding max_colors, though we know not all can be incremented. + * Sometimes, the first component can be incremented more than once! + * (Example: for 16 colors, we start at 2*2*2, go to 3*2*2, then 4*2*2.) + * In RGB colorspace, try to increment G first, then R, then B. + */ + do { + changed = FALSE; + for (i = 0; i < nc; i++) { + j = (cinfo->out_color_space == JCS_RGB ? RGB_order[i] : i); + /* calculate new total_colors if Ncolors[j] is incremented */ + temp = total_colors / Ncolors[j]; + temp *= Ncolors[j]+1; /* done in long arith to avoid oflo */ + if (temp > (long) max_colors) + break; /* won't fit, done with this pass */ + Ncolors[j]++; /* OK, apply the increment */ + total_colors = (int) temp; + changed = TRUE; + } + } while (changed); + + return total_colors; +} + + +LOCAL(int) +output_value (j_decompress_ptr cinfo, int ci, int j, int maxj) +/* Return j'th output value, where j will range from 0 to maxj */ +/* The output values must fall in 0..MAXJSAMPLE in increasing order */ +{ + /* We always provide values 0 and MAXJSAMPLE for each component; + * any additional values are equally spaced between these limits. + * (Forcing the upper and lower values to the limits ensures that + * dithering can't produce a color outside the selected gamut.) + */ + return (int) (((INT32) j * MAXJSAMPLE + maxj/2) / maxj); +} + + +LOCAL(int) +largest_input_value (j_decompress_ptr cinfo, int ci, int j, int maxj) +/* Return largest input value that should map to j'th output value */ +/* Must have largest(j=0) >= 0, and largest(j=maxj) >= MAXJSAMPLE */ +{ + /* Breakpoints are halfway between values returned by output_value */ + return (int) (((INT32) (2*j + 1) * MAXJSAMPLE + maxj) / (2*maxj)); +} + + +/* + * Create the colormap. + */ + +LOCAL(void) +create_colormap (j_decompress_ptr cinfo) +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + JSAMPARRAY colormap; /* Created colormap */ + int total_colors; /* Number of distinct output colors */ + int i,j,k, nci, blksize, blkdist, ptr, val; + + /* Select number of colors for each component */ + total_colors = select_ncolors(cinfo, cquantize->Ncolors); + + /* Report selected color counts */ + if (cinfo->out_color_components == 3) + TRACEMS4(cinfo, 1, JTRC_QUANT_3_NCOLORS, + total_colors, cquantize->Ncolors[0], + cquantize->Ncolors[1], cquantize->Ncolors[2]); + else + TRACEMS1(cinfo, 1, JTRC_QUANT_NCOLORS, total_colors); + + /* Allocate and fill in the colormap. */ + /* The colors are ordered in the map in standard row-major order, */ + /* i.e. rightmost (highest-indexed) color changes most rapidly. */ + + colormap = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (JDIMENSION) total_colors, (JDIMENSION) cinfo->out_color_components); + + /* blksize is number of adjacent repeated entries for a component */ + /* blkdist is distance between groups of identical entries for a component */ + blkdist = total_colors; + + for (i = 0; i < cinfo->out_color_components; i++) { + /* fill in colormap entries for i'th color component */ + nci = cquantize->Ncolors[i]; /* # of distinct values for this color */ + blksize = blkdist / nci; + for (j = 0; j < nci; j++) { + /* Compute j'th output value (out of nci) for component */ + val = output_value(cinfo, i, j, nci-1); + /* Fill in all colormap entries that have this value of this component */ + for (ptr = j * blksize; ptr < total_colors; ptr += blkdist) { + /* fill in blksize entries beginning at ptr */ + for (k = 0; k < blksize; k++) + colormap[i][ptr+k] = (JSAMPLE) val; + } + } + blkdist = blksize; /* blksize of this color is blkdist of next */ + } + + /* Save the colormap in private storage, + * where it will survive color quantization mode changes. + */ + cquantize->sv_colormap = colormap; + cquantize->sv_actual = total_colors; +} + + +/* + * Create the color index table. + */ + +LOCAL(void) +create_colorindex (j_decompress_ptr cinfo) +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + JSAMPROW indexptr; + int i,j,k, nci, blksize, val, pad; + + /* For ordered dither, we pad the color index tables by MAXJSAMPLE in + * each direction (input index values can be -MAXJSAMPLE .. 2*MAXJSAMPLE). + * This is not necessary in the other dithering modes. However, we + * flag whether it was done in case user changes dithering mode. + */ + if (cinfo->dither_mode == JDITHER_ORDERED) { + pad = MAXJSAMPLE*2; + cquantize->is_padded = TRUE; + } else { + pad = 0; + cquantize->is_padded = FALSE; + } + + cquantize->colorindex = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (JDIMENSION) (MAXJSAMPLE+1 + pad), + (JDIMENSION) cinfo->out_color_components); + + /* blksize is number of adjacent repeated entries for a component */ + blksize = cquantize->sv_actual; + + for (i = 0; i < cinfo->out_color_components; i++) { + /* fill in colorindex entries for i'th color component */ + nci = cquantize->Ncolors[i]; /* # of distinct values for this color */ + blksize = blksize / nci; + + /* adjust colorindex pointers to provide padding at negative indexes. */ + if (pad) + cquantize->colorindex[i] += MAXJSAMPLE; + + /* in loop, val = index of current output value, */ + /* and k = largest j that maps to current val */ + indexptr = cquantize->colorindex[i]; + val = 0; + k = largest_input_value(cinfo, i, 0, nci-1); + for (j = 0; j <= MAXJSAMPLE; j++) { + while (j > k) /* advance val if past boundary */ + k = largest_input_value(cinfo, i, ++val, nci-1); + /* premultiply so that no multiplication needed in main processing */ + indexptr[j] = (JSAMPLE) (val * blksize); + } + /* Pad at both ends if necessary */ + if (pad) + for (j = 1; j <= MAXJSAMPLE; j++) { + indexptr[-j] = indexptr[0]; + indexptr[MAXJSAMPLE+j] = indexptr[MAXJSAMPLE]; + } + } +} + + +/* + * Create an ordered-dither array for a component having ncolors + * distinct output values. + */ + +LOCAL(ODITHER_MATRIX_PTR) +make_odither_array (j_decompress_ptr cinfo, int ncolors) +{ + ODITHER_MATRIX_PTR odither; + int j,k; + INT32 num,den; + + odither = (ODITHER_MATRIX_PTR) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(ODITHER_MATRIX)); + /* The inter-value distance for this color is MAXJSAMPLE/(ncolors-1). + * Hence the dither value for the matrix cell with fill order f + * (f=0..N-1) should be (N-1-2*f)/(2*N) * MAXJSAMPLE/(ncolors-1). + * On 16-bit-int machine, be careful to avoid overflow. + */ + den = 2 * ODITHER_CELLS * ((INT32) (ncolors - 1)); + for (j = 0; j < ODITHER_SIZE; j++) { + for (k = 0; k < ODITHER_SIZE; k++) { + num = ((INT32) (ODITHER_CELLS-1 - 2*((int)base_dither_matrix[j][k]))) + * MAXJSAMPLE; + /* Ensure round towards zero despite C's lack of consistency + * about rounding negative values in integer division... + */ + odither[j][k] = (int) (num<0 ? -((-num)/den) : num/den); + } + } + return odither; +} + + +/* + * Create the ordered-dither tables. + * Components having the same number of representative colors may + * share a dither table. + */ + +LOCAL(void) +create_odither_tables (j_decompress_ptr cinfo) +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + ODITHER_MATRIX_PTR odither; + int i, j, nci; + + for (i = 0; i < cinfo->out_color_components; i++) { + nci = cquantize->Ncolors[i]; /* # of distinct values for this color */ + odither = NULL; /* search for matching prior component */ + for (j = 0; j < i; j++) { + if (nci == cquantize->Ncolors[j]) { + odither = cquantize->odither[j]; + break; + } + } + if (odither == NULL) /* need a new table? */ + odither = make_odither_array(cinfo, nci); + cquantize->odither[i] = odither; + } +} + + +/* + * Map some rows of pixels to the output colormapped representation. + */ + +METHODDEF(void) +color_quantize (j_decompress_ptr cinfo, JSAMPARRAY input_buf, + JSAMPARRAY output_buf, int num_rows) +/* General case, no dithering */ +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + JSAMPARRAY colorindex = cquantize->colorindex; + register int pixcode, ci; + register JSAMPROW ptrin, ptrout; + int row; + JDIMENSION col; + JDIMENSION width = cinfo->output_width; + register int nc = cinfo->out_color_components; + + for (row = 0; row < num_rows; row++) { + ptrin = input_buf[row]; + ptrout = output_buf[row]; + for (col = width; col > 0; col--) { + pixcode = 0; + for (ci = 0; ci < nc; ci++) { + pixcode += GETJSAMPLE(colorindex[ci][GETJSAMPLE(*ptrin++)]); + } + *ptrout++ = (JSAMPLE) pixcode; + } + } +} + + +METHODDEF(void) +color_quantize3 (j_decompress_ptr cinfo, JSAMPARRAY input_buf, + JSAMPARRAY output_buf, int num_rows) +/* Fast path for out_color_components==3, no dithering */ +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + register int pixcode; + register JSAMPROW ptrin, ptrout; + JSAMPROW colorindex0 = cquantize->colorindex[0]; + JSAMPROW colorindex1 = cquantize->colorindex[1]; + JSAMPROW colorindex2 = cquantize->colorindex[2]; + int row; + JDIMENSION col; + JDIMENSION width = cinfo->output_width; + + for (row = 0; row < num_rows; row++) { + ptrin = input_buf[row]; + ptrout = output_buf[row]; + for (col = width; col > 0; col--) { + pixcode = GETJSAMPLE(colorindex0[GETJSAMPLE(*ptrin++)]); + pixcode += GETJSAMPLE(colorindex1[GETJSAMPLE(*ptrin++)]); + pixcode += GETJSAMPLE(colorindex2[GETJSAMPLE(*ptrin++)]); + *ptrout++ = (JSAMPLE) pixcode; + } + } +} + + +METHODDEF(void) +quantize_ord_dither (j_decompress_ptr cinfo, JSAMPARRAY input_buf, + JSAMPARRAY output_buf, int num_rows) +/* General case, with ordered dithering */ +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + register JSAMPROW input_ptr; + register JSAMPROW output_ptr; + JSAMPROW colorindex_ci; + int * dither; /* points to active row of dither matrix */ + int row_index, col_index; /* current indexes into dither matrix */ + int nc = cinfo->out_color_components; + int ci; + int row; + JDIMENSION col; + JDIMENSION width = cinfo->output_width; + + for (row = 0; row < num_rows; row++) { + /* Initialize output values to 0 so can process components separately */ + FMEMZERO((void FAR *) output_buf[row], + (size_t) (width * SIZEOF(JSAMPLE))); + row_index = cquantize->row_index; + for (ci = 0; ci < nc; ci++) { + input_ptr = input_buf[row] + ci; + output_ptr = output_buf[row]; + colorindex_ci = cquantize->colorindex[ci]; + dither = cquantize->odither[ci][row_index]; + col_index = 0; + + for (col = width; col > 0; col--) { + /* Form pixel value + dither, range-limit to 0..MAXJSAMPLE, + * select output value, accumulate into output code for this pixel. + * Range-limiting need not be done explicitly, as we have extended + * the colorindex table to produce the right answers for out-of-range + * inputs. The maximum dither is +- MAXJSAMPLE; this sets the + * required amount of padding. + */ + *output_ptr += colorindex_ci[GETJSAMPLE(*input_ptr)+dither[col_index]]; + input_ptr += nc; + output_ptr++; + col_index = (col_index + 1) & ODITHER_MASK; + } + } + /* Advance row index for next row */ + row_index = (row_index + 1) & ODITHER_MASK; + cquantize->row_index = row_index; + } +} + + +METHODDEF(void) +quantize3_ord_dither (j_decompress_ptr cinfo, JSAMPARRAY input_buf, + JSAMPARRAY output_buf, int num_rows) +/* Fast path for out_color_components==3, with ordered dithering */ +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + register int pixcode; + register JSAMPROW input_ptr; + register JSAMPROW output_ptr; + JSAMPROW colorindex0 = cquantize->colorindex[0]; + JSAMPROW colorindex1 = cquantize->colorindex[1]; + JSAMPROW colorindex2 = cquantize->colorindex[2]; + int * dither0; /* points to active row of dither matrix */ + int * dither1; + int * dither2; + int row_index, col_index; /* current indexes into dither matrix */ + int row; + JDIMENSION col; + JDIMENSION width = cinfo->output_width; + + for (row = 0; row < num_rows; row++) { + row_index = cquantize->row_index; + input_ptr = input_buf[row]; + output_ptr = output_buf[row]; + dither0 = cquantize->odither[0][row_index]; + dither1 = cquantize->odither[1][row_index]; + dither2 = cquantize->odither[2][row_index]; + col_index = 0; + + for (col = width; col > 0; col--) { + pixcode = GETJSAMPLE(colorindex0[GETJSAMPLE(*input_ptr++) + + dither0[col_index]]); + pixcode += GETJSAMPLE(colorindex1[GETJSAMPLE(*input_ptr++) + + dither1[col_index]]); + pixcode += GETJSAMPLE(colorindex2[GETJSAMPLE(*input_ptr++) + + dither2[col_index]]); + *output_ptr++ = (JSAMPLE) pixcode; + col_index = (col_index + 1) & ODITHER_MASK; + } + row_index = (row_index + 1) & ODITHER_MASK; + cquantize->row_index = row_index; + } +} + + +METHODDEF(void) +quantize_fs_dither (j_decompress_ptr cinfo, JSAMPARRAY input_buf, + JSAMPARRAY output_buf, int num_rows) +/* General case, with Floyd-Steinberg dithering */ +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + register LOCFSERROR cur; /* current error or pixel value */ + LOCFSERROR belowerr; /* error for pixel below cur */ + LOCFSERROR bpreverr; /* error for below/prev col */ + LOCFSERROR bnexterr; /* error for below/next col */ + LOCFSERROR delta; + register FSERRPTR errorptr; /* => fserrors[] at column before current */ + register JSAMPROW input_ptr; + register JSAMPROW output_ptr; + JSAMPROW colorindex_ci; + JSAMPROW colormap_ci; + int pixcode; + int nc = cinfo->out_color_components; + int dir; /* 1 for left-to-right, -1 for right-to-left */ + int dirnc; /* dir * nc */ + int ci; + int row; + JDIMENSION col; + JDIMENSION width = cinfo->output_width; + JSAMPLE *range_limit = cinfo->sample_range_limit; + SHIFT_TEMPS + + for (row = 0; row < num_rows; row++) { + /* Initialize output values to 0 so can process components separately */ + FMEMZERO((void FAR *) output_buf[row], + (size_t) (width * SIZEOF(JSAMPLE))); + for (ci = 0; ci < nc; ci++) { + input_ptr = input_buf[row] + ci; + output_ptr = output_buf[row]; + if (cquantize->on_odd_row) { + /* work right to left in this row */ + input_ptr += (width-1) * nc; /* so point to rightmost pixel */ + output_ptr += width-1; + dir = -1; + dirnc = -nc; + errorptr = cquantize->fserrors[ci] + (width+1); /* => entry after last column */ + } else { + /* work left to right in this row */ + dir = 1; + dirnc = nc; + errorptr = cquantize->fserrors[ci]; /* => entry before first column */ + } + colorindex_ci = cquantize->colorindex[ci]; + colormap_ci = cquantize->sv_colormap[ci]; + /* Preset error values: no error propagated to first pixel from left */ + cur = 0; + /* and no error propagated to row below yet */ + belowerr = bpreverr = 0; + + for (col = width; col > 0; col--) { + /* cur holds the error propagated from the previous pixel on the + * current line. Add the error propagated from the previous line + * to form the complete error correction term for this pixel, and + * round the error term (which is expressed * 16) to an integer. + * RIGHT_SHIFT rounds towards minus infinity, so adding 8 is correct + * for either sign of the error value. + * Note: errorptr points to *previous* column's array entry. + */ + cur = RIGHT_SHIFT(cur + errorptr[dir] + 8, 4); + /* Form pixel value + error, and range-limit to 0..MAXJSAMPLE. + * The maximum error is +- MAXJSAMPLE; this sets the required size + * of the range_limit array. + */ + cur += GETJSAMPLE(*input_ptr); + cur = GETJSAMPLE(range_limit[cur]); + /* Select output value, accumulate into output code for this pixel */ + pixcode = GETJSAMPLE(colorindex_ci[cur]); + *output_ptr += (JSAMPLE) pixcode; + /* Compute actual representation error at this pixel */ + /* Note: we can do this even though we don't have the final */ + /* pixel code, because the colormap is orthogonal. */ + cur -= GETJSAMPLE(colormap_ci[pixcode]); + /* Compute error fractions to be propagated to adjacent pixels. + * Add these into the running sums, and simultaneously shift the + * next-line error sums left by 1 column. + */ + bnexterr = cur; + delta = cur * 2; + cur += delta; /* form error * 3 */ + errorptr[0] = (FSERROR) (bpreverr + cur); + cur += delta; /* form error * 5 */ + bpreverr = belowerr + cur; + belowerr = bnexterr; + cur += delta; /* form error * 7 */ + /* At this point cur contains the 7/16 error value to be propagated + * to the next pixel on the current line, and all the errors for the + * next line have been shifted over. We are therefore ready to move on. + */ + input_ptr += dirnc; /* advance input ptr to next column */ + output_ptr += dir; /* advance output ptr to next column */ + errorptr += dir; /* advance errorptr to current column */ + } + /* Post-loop cleanup: we must unload the final error value into the + * final fserrors[] entry. Note we need not unload belowerr because + * it is for the dummy column before or after the actual array. + */ + errorptr[0] = (FSERROR) bpreverr; /* unload prev err into array */ + } + cquantize->on_odd_row = (cquantize->on_odd_row ? FALSE : TRUE); + } +} + + +/* + * Allocate workspace for Floyd-Steinberg errors. + */ + +LOCAL(void) +alloc_fs_workspace (j_decompress_ptr cinfo) +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + size_t arraysize; + int i; + + arraysize = (size_t) ((cinfo->output_width + 2) * SIZEOF(FSERROR)); + for (i = 0; i < cinfo->out_color_components; i++) { + cquantize->fserrors[i] = (FSERRPTR) + (*cinfo->mem->alloc_large)((j_common_ptr) cinfo, JPOOL_IMAGE, arraysize); + } +} + + +/* + * Initialize for one-pass color quantization. + */ + +METHODDEF(void) +start_pass_1_quant (j_decompress_ptr cinfo, boolean is_pre_scan) +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + size_t arraysize; + int i; + + /* Install my colormap. */ + cinfo->colormap = cquantize->sv_colormap; + cinfo->actual_number_of_colors = cquantize->sv_actual; + + /* Initialize for desired dithering mode. */ + switch (cinfo->dither_mode) { + case JDITHER_NONE: + if (cinfo->out_color_components == 3) + cquantize->pub.color_quantize = color_quantize3; + else + cquantize->pub.color_quantize = color_quantize; + break; + case JDITHER_ORDERED: + if (cinfo->out_color_components == 3) + cquantize->pub.color_quantize = quantize3_ord_dither; + else + cquantize->pub.color_quantize = quantize_ord_dither; + cquantize->row_index = 0; /* initialize state for ordered dither */ + /* If user changed to ordered dither from another mode, + * we must recreate the color index table with padding. + * This will cost extra space, but probably isn't very likely. + */ + if (! cquantize->is_padded) + create_colorindex(cinfo); + /* Create ordered-dither tables if we didn't already. */ + if (cquantize->odither[0] == NULL) + create_odither_tables(cinfo); + break; + case JDITHER_FS: + cquantize->pub.color_quantize = quantize_fs_dither; + cquantize->on_odd_row = FALSE; /* initialize state for F-S dither */ + /* Allocate Floyd-Steinberg workspace if didn't already. */ + if (cquantize->fserrors[0] == NULL) + alloc_fs_workspace(cinfo); + /* Initialize the propagated errors to zero. */ + arraysize = (size_t) ((cinfo->output_width + 2) * SIZEOF(FSERROR)); + for (i = 0; i < cinfo->out_color_components; i++) + FMEMZERO((void FAR *) cquantize->fserrors[i], arraysize); + break; + default: + ERREXIT(cinfo, JERR_NOT_COMPILED); + break; + } +} + + +/* + * Finish up at the end of the pass. + */ + +METHODDEF(void) +finish_pass_1_quant (j_decompress_ptr cinfo) +{ + /* no work in 1-pass case */ +} + + +/* + * Switch to a new external colormap between output passes. + * Shouldn't get to this module! + */ + +METHODDEF(void) +new_color_map_1_quant (j_decompress_ptr cinfo) +{ + ERREXIT(cinfo, JERR_MODE_CHANGE); +} + + +/* + * Module initialization routine for 1-pass color quantization. + */ + +GLOBAL(void) +jinit_1pass_quantizer (j_decompress_ptr cinfo) +{ + my_cquantize_ptr cquantize; + + cquantize = (my_cquantize_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_cquantizer)); + cinfo->cquantize = (struct jpeg_color_quantizer *) cquantize; + cquantize->pub.start_pass = start_pass_1_quant; + cquantize->pub.finish_pass = finish_pass_1_quant; + cquantize->pub.new_color_map = new_color_map_1_quant; + cquantize->fserrors[0] = NULL; /* Flag FS workspace not allocated */ + cquantize->odither[0] = NULL; /* Also flag odither arrays not allocated */ + + /* Make sure my internal arrays won't overflow */ + if (cinfo->out_color_components > MAX_Q_COMPS) + ERREXIT1(cinfo, JERR_QUANT_COMPONENTS, MAX_Q_COMPS); + /* Make sure colormap indexes can be represented by JSAMPLEs */ + if (cinfo->desired_number_of_colors > (MAXJSAMPLE+1)) + ERREXIT1(cinfo, JERR_QUANT_MANY_COLORS, MAXJSAMPLE+1); + + /* Create the colormap and color index table. */ + create_colormap(cinfo); + create_colorindex(cinfo); + + /* Allocate Floyd-Steinberg workspace now if requested. + * We do this now since it is FAR storage and may affect the memory + * manager's space calculations. If the user changes to FS dither + * mode in a later pass, we will allocate the space then, and will + * possibly overrun the max_memory_to_use setting. + */ + if (cinfo->dither_mode == JDITHER_FS) + alloc_fs_workspace(cinfo); +} + +#endif /* QUANT_1PASS_SUPPORTED */ diff --git a/compat/libjpeg/jquant2.c b/compat/libjpeg/jquant2.c new file mode 100755 index 0000000..f7e351f --- /dev/null +++ b/compat/libjpeg/jquant2.c @@ -0,0 +1,1311 @@ +/* + * jquant2.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * Modified 2011 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains 2-pass color quantization (color mapping) routines. + * These routines provide selection of a custom color map for an image, + * followed by mapping of the image to that color map, with optional + * Floyd-Steinberg dithering. + * It is also possible to use just the second pass to map to an arbitrary + * externally-given color map. + * + * Note: ordered dithering is not supported, since there isn't any fast + * way to compute intercolor distances; it's unclear that ordered dither's + * fundamental assumptions even hold with an irregularly spaced color map. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + +#ifdef QUANT_2PASS_SUPPORTED + + +/* + * This module implements the well-known Heckbert paradigm for color + * quantization. Most of the ideas used here can be traced back to + * Heckbert's seminal paper + * Heckbert, Paul. "Color Image Quantization for Frame Buffer Display", + * Proc. SIGGRAPH '82, Computer Graphics v.16 #3 (July 1982), pp 297-304. + * + * In the first pass over the image, we accumulate a histogram showing the + * usage count of each possible color. To keep the histogram to a reasonable + * size, we reduce the precision of the input; typical practice is to retain + * 5 or 6 bits per color, so that 8 or 4 different input values are counted + * in the same histogram cell. + * + * Next, the color-selection step begins with a box representing the whole + * color space, and repeatedly splits the "largest" remaining box until we + * have as many boxes as desired colors. Then the mean color in each + * remaining box becomes one of the possible output colors. + * + * The second pass over the image maps each input pixel to the closest output + * color (optionally after applying a Floyd-Steinberg dithering correction). + * This mapping is logically trivial, but making it go fast enough requires + * considerable care. + * + * Heckbert-style quantizers vary a good deal in their policies for choosing + * the "largest" box and deciding where to cut it. The particular policies + * used here have proved out well in experimental comparisons, but better ones + * may yet be found. + * + * In earlier versions of the IJG code, this module quantized in YCbCr color + * space, processing the raw upsampled data without a color conversion step. + * This allowed the color conversion math to be done only once per colormap + * entry, not once per pixel. However, that optimization precluded other + * useful optimizations (such as merging color conversion with upsampling) + * and it also interfered with desired capabilities such as quantizing to an + * externally-supplied colormap. We have therefore abandoned that approach. + * The present code works in the post-conversion color space, typically RGB. + * + * To improve the visual quality of the results, we actually work in scaled + * RGB space, giving G distances more weight than R, and R in turn more than + * B. To do everything in integer math, we must use integer scale factors. + * The 2/3/1 scale factors used here correspond loosely to the relative + * weights of the colors in the NTSC grayscale equation. + * If you want to use this code to quantize a non-RGB color space, you'll + * probably need to change these scale factors. + */ + +#define R_SCALE 2 /* scale R distances by this much */ +#define G_SCALE 3 /* scale G distances by this much */ +#define B_SCALE 1 /* and B by this much */ + +/* Relabel R/G/B as components 0/1/2, respecting the RGB ordering defined + * in jmorecfg.h. As the code stands, it will do the right thing for R,G,B + * and B,G,R orders. If you define some other weird order in jmorecfg.h, + * you'll get compile errors until you extend this logic. In that case + * you'll probably want to tweak the histogram sizes too. + */ + +#if RGB_RED == 0 +#define C0_SCALE R_SCALE +#endif +#if RGB_BLUE == 0 +#define C0_SCALE B_SCALE +#endif +#if RGB_GREEN == 1 +#define C1_SCALE G_SCALE +#endif +#if RGB_RED == 2 +#define C2_SCALE R_SCALE +#endif +#if RGB_BLUE == 2 +#define C2_SCALE B_SCALE +#endif + + +/* + * First we have the histogram data structure and routines for creating it. + * + * The number of bits of precision can be adjusted by changing these symbols. + * We recommend keeping 6 bits for G and 5 each for R and B. + * If you have plenty of memory and cycles, 6 bits all around gives marginally + * better results; if you are short of memory, 5 bits all around will save + * some space but degrade the results. + * To maintain a fully accurate histogram, we'd need to allocate a "long" + * (preferably unsigned long) for each cell. In practice this is overkill; + * we can get by with 16 bits per cell. Few of the cell counts will overflow, + * and clamping those that do overflow to the maximum value will give close- + * enough results. This reduces the recommended histogram size from 256Kb + * to 128Kb, which is a useful savings on PC-class machines. + * (In the second pass the histogram space is re-used for pixel mapping data; + * in that capacity, each cell must be able to store zero to the number of + * desired colors. 16 bits/cell is plenty for that too.) + * Since the JPEG code is intended to run in small memory model on 80x86 + * machines, we can't just allocate the histogram in one chunk. Instead + * of a true 3-D array, we use a row of pointers to 2-D arrays. Each + * pointer corresponds to a C0 value (typically 2^5 = 32 pointers) and + * each 2-D array has 2^6*2^5 = 2048 or 2^6*2^6 = 4096 entries. Note that + * on 80x86 machines, the pointer row is in near memory but the actual + * arrays are in far memory (same arrangement as we use for image arrays). + */ + +#define MAXNUMCOLORS (MAXJSAMPLE+1) /* maximum size of colormap */ + +/* These will do the right thing for either R,G,B or B,G,R color order, + * but you may not like the results for other color orders. + */ +#define HIST_C0_BITS 5 /* bits of precision in R/B histogram */ +#define HIST_C1_BITS 6 /* bits of precision in G histogram */ +#define HIST_C2_BITS 5 /* bits of precision in B/R histogram */ + +/* Number of elements along histogram axes. */ +#define HIST_C0_ELEMS (1<cquantize; + register JSAMPROW ptr; + register histptr histp; + register hist3d histogram = cquantize->histogram; + int row; + JDIMENSION col; + JDIMENSION width = cinfo->output_width; + + for (row = 0; row < num_rows; row++) { + ptr = input_buf[row]; + for (col = width; col > 0; col--) { + /* get pixel value and index into the histogram */ + histp = & histogram[GETJSAMPLE(ptr[0]) >> C0_SHIFT] + [GETJSAMPLE(ptr[1]) >> C1_SHIFT] + [GETJSAMPLE(ptr[2]) >> C2_SHIFT]; + /* increment, check for overflow and undo increment if so. */ + if (++(*histp) <= 0) + (*histp)--; + ptr += 3; + } + } +} + + +/* + * Next we have the really interesting routines: selection of a colormap + * given the completed histogram. + * These routines work with a list of "boxes", each representing a rectangular + * subset of the input color space (to histogram precision). + */ + +typedef struct { + /* The bounds of the box (inclusive); expressed as histogram indexes */ + int c0min, c0max; + int c1min, c1max; + int c2min, c2max; + /* The volume (actually 2-norm) of the box */ + INT32 volume; + /* The number of nonzero histogram cells within this box */ + long colorcount; +} box; + +typedef box * boxptr; + + +LOCAL(boxptr) +find_biggest_color_pop (boxptr boxlist, int numboxes) +/* Find the splittable box with the largest color population */ +/* Returns NULL if no splittable boxes remain */ +{ + register boxptr boxp; + register int i; + register long maxc = 0; + boxptr which = NULL; + + for (i = 0, boxp = boxlist; i < numboxes; i++, boxp++) { + if (boxp->colorcount > maxc && boxp->volume > 0) { + which = boxp; + maxc = boxp->colorcount; + } + } + return which; +} + + +LOCAL(boxptr) +find_biggest_volume (boxptr boxlist, int numboxes) +/* Find the splittable box with the largest (scaled) volume */ +/* Returns NULL if no splittable boxes remain */ +{ + register boxptr boxp; + register int i; + register INT32 maxv = 0; + boxptr which = NULL; + + for (i = 0, boxp = boxlist; i < numboxes; i++, boxp++) { + if (boxp->volume > maxv) { + which = boxp; + maxv = boxp->volume; + } + } + return which; +} + + +LOCAL(void) +update_box (j_decompress_ptr cinfo, boxptr boxp) +/* Shrink the min/max bounds of a box to enclose only nonzero elements, */ +/* and recompute its volume and population */ +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + hist3d histogram = cquantize->histogram; + histptr histp; + int c0,c1,c2; + int c0min,c0max,c1min,c1max,c2min,c2max; + INT32 dist0,dist1,dist2; + long ccount; + + c0min = boxp->c0min; c0max = boxp->c0max; + c1min = boxp->c1min; c1max = boxp->c1max; + c2min = boxp->c2min; c2max = boxp->c2max; + + if (c0max > c0min) + for (c0 = c0min; c0 <= c0max; c0++) + for (c1 = c1min; c1 <= c1max; c1++) { + histp = & histogram[c0][c1][c2min]; + for (c2 = c2min; c2 <= c2max; c2++) + if (*histp++ != 0) { + boxp->c0min = c0min = c0; + goto have_c0min; + } + } + have_c0min: + if (c0max > c0min) + for (c0 = c0max; c0 >= c0min; c0--) + for (c1 = c1min; c1 <= c1max; c1++) { + histp = & histogram[c0][c1][c2min]; + for (c2 = c2min; c2 <= c2max; c2++) + if (*histp++ != 0) { + boxp->c0max = c0max = c0; + goto have_c0max; + } + } + have_c0max: + if (c1max > c1min) + for (c1 = c1min; c1 <= c1max; c1++) + for (c0 = c0min; c0 <= c0max; c0++) { + histp = & histogram[c0][c1][c2min]; + for (c2 = c2min; c2 <= c2max; c2++) + if (*histp++ != 0) { + boxp->c1min = c1min = c1; + goto have_c1min; + } + } + have_c1min: + if (c1max > c1min) + for (c1 = c1max; c1 >= c1min; c1--) + for (c0 = c0min; c0 <= c0max; c0++) { + histp = & histogram[c0][c1][c2min]; + for (c2 = c2min; c2 <= c2max; c2++) + if (*histp++ != 0) { + boxp->c1max = c1max = c1; + goto have_c1max; + } + } + have_c1max: + if (c2max > c2min) + for (c2 = c2min; c2 <= c2max; c2++) + for (c0 = c0min; c0 <= c0max; c0++) { + histp = & histogram[c0][c1min][c2]; + for (c1 = c1min; c1 <= c1max; c1++, histp += HIST_C2_ELEMS) + if (*histp != 0) { + boxp->c2min = c2min = c2; + goto have_c2min; + } + } + have_c2min: + if (c2max > c2min) + for (c2 = c2max; c2 >= c2min; c2--) + for (c0 = c0min; c0 <= c0max; c0++) { + histp = & histogram[c0][c1min][c2]; + for (c1 = c1min; c1 <= c1max; c1++, histp += HIST_C2_ELEMS) + if (*histp != 0) { + boxp->c2max = c2max = c2; + goto have_c2max; + } + } + have_c2max: + + /* Update box volume. + * We use 2-norm rather than real volume here; this biases the method + * against making long narrow boxes, and it has the side benefit that + * a box is splittable iff norm > 0. + * Since the differences are expressed in histogram-cell units, + * we have to shift back to JSAMPLE units to get consistent distances; + * after which, we scale according to the selected distance scale factors. + */ + dist0 = ((c0max - c0min) << C0_SHIFT) * C0_SCALE; + dist1 = ((c1max - c1min) << C1_SHIFT) * C1_SCALE; + dist2 = ((c2max - c2min) << C2_SHIFT) * C2_SCALE; + boxp->volume = dist0*dist0 + dist1*dist1 + dist2*dist2; + + /* Now scan remaining volume of box and compute population */ + ccount = 0; + for (c0 = c0min; c0 <= c0max; c0++) + for (c1 = c1min; c1 <= c1max; c1++) { + histp = & histogram[c0][c1][c2min]; + for (c2 = c2min; c2 <= c2max; c2++, histp++) + if (*histp != 0) { + ccount++; + } + } + boxp->colorcount = ccount; +} + + +LOCAL(int) +median_cut (j_decompress_ptr cinfo, boxptr boxlist, int numboxes, + int desired_colors) +/* Repeatedly select and split the largest box until we have enough boxes */ +{ + int n,lb; + int c0,c1,c2,cmax; + register boxptr b1,b2; + + while (numboxes < desired_colors) { + /* Select box to split. + * Current algorithm: by population for first half, then by volume. + */ + if (numboxes*2 <= desired_colors) { + b1 = find_biggest_color_pop(boxlist, numboxes); + } else { + b1 = find_biggest_volume(boxlist, numboxes); + } + if (b1 == NULL) /* no splittable boxes left! */ + break; + b2 = &boxlist[numboxes]; /* where new box will go */ + /* Copy the color bounds to the new box. */ + b2->c0max = b1->c0max; b2->c1max = b1->c1max; b2->c2max = b1->c2max; + b2->c0min = b1->c0min; b2->c1min = b1->c1min; b2->c2min = b1->c2min; + /* Choose which axis to split the box on. + * Current algorithm: longest scaled axis. + * See notes in update_box about scaling distances. + */ + c0 = ((b1->c0max - b1->c0min) << C0_SHIFT) * C0_SCALE; + c1 = ((b1->c1max - b1->c1min) << C1_SHIFT) * C1_SCALE; + c2 = ((b1->c2max - b1->c2min) << C2_SHIFT) * C2_SCALE; + /* We want to break any ties in favor of green, then red, blue last. + * This code does the right thing for R,G,B or B,G,R color orders only. + */ +#if RGB_RED == 0 + cmax = c1; n = 1; + if (c0 > cmax) { cmax = c0; n = 0; } + if (c2 > cmax) { n = 2; } +#else + cmax = c1; n = 1; + if (c2 > cmax) { cmax = c2; n = 2; } + if (c0 > cmax) { n = 0; } +#endif + /* Choose split point along selected axis, and update box bounds. + * Current algorithm: split at halfway point. + * (Since the box has been shrunk to minimum volume, + * any split will produce two nonempty subboxes.) + * Note that lb value is max for lower box, so must be < old max. + */ + switch (n) { + case 0: + lb = (b1->c0max + b1->c0min) / 2; + b1->c0max = lb; + b2->c0min = lb+1; + break; + case 1: + lb = (b1->c1max + b1->c1min) / 2; + b1->c1max = lb; + b2->c1min = lb+1; + break; + case 2: + lb = (b1->c2max + b1->c2min) / 2; + b1->c2max = lb; + b2->c2min = lb+1; + break; + } + /* Update stats for boxes */ + update_box(cinfo, b1); + update_box(cinfo, b2); + numboxes++; + } + return numboxes; +} + + +LOCAL(void) +compute_color (j_decompress_ptr cinfo, boxptr boxp, int icolor) +/* Compute representative color for a box, put it in colormap[icolor] */ +{ + /* Current algorithm: mean weighted by pixels (not colors) */ + /* Note it is important to get the rounding correct! */ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + hist3d histogram = cquantize->histogram; + histptr histp; + int c0,c1,c2; + int c0min,c0max,c1min,c1max,c2min,c2max; + long count; + long total = 0; + long c0total = 0; + long c1total = 0; + long c2total = 0; + + c0min = boxp->c0min; c0max = boxp->c0max; + c1min = boxp->c1min; c1max = boxp->c1max; + c2min = boxp->c2min; c2max = boxp->c2max; + + for (c0 = c0min; c0 <= c0max; c0++) + for (c1 = c1min; c1 <= c1max; c1++) { + histp = & histogram[c0][c1][c2min]; + for (c2 = c2min; c2 <= c2max; c2++) { + if ((count = *histp++) != 0) { + total += count; + c0total += ((c0 << C0_SHIFT) + ((1<>1)) * count; + c1total += ((c1 << C1_SHIFT) + ((1<>1)) * count; + c2total += ((c2 << C2_SHIFT) + ((1<>1)) * count; + } + } + } + + cinfo->colormap[0][icolor] = (JSAMPLE) ((c0total + (total>>1)) / total); + cinfo->colormap[1][icolor] = (JSAMPLE) ((c1total + (total>>1)) / total); + cinfo->colormap[2][icolor] = (JSAMPLE) ((c2total + (total>>1)) / total); +} + + +LOCAL(void) +select_colors (j_decompress_ptr cinfo, int desired_colors) +/* Master routine for color selection */ +{ + boxptr boxlist; + int numboxes; + int i; + + /* Allocate workspace for box list */ + boxlist = (boxptr) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, desired_colors * SIZEOF(box)); + /* Initialize one box containing whole space */ + numboxes = 1; + boxlist[0].c0min = 0; + boxlist[0].c0max = MAXJSAMPLE >> C0_SHIFT; + boxlist[0].c1min = 0; + boxlist[0].c1max = MAXJSAMPLE >> C1_SHIFT; + boxlist[0].c2min = 0; + boxlist[0].c2max = MAXJSAMPLE >> C2_SHIFT; + /* Shrink it to actually-used volume and set its statistics */ + update_box(cinfo, & boxlist[0]); + /* Perform median-cut to produce final box list */ + numboxes = median_cut(cinfo, boxlist, numboxes, desired_colors); + /* Compute the representative color for each box, fill colormap */ + for (i = 0; i < numboxes; i++) + compute_color(cinfo, & boxlist[i], i); + cinfo->actual_number_of_colors = numboxes; + TRACEMS1(cinfo, 1, JTRC_QUANT_SELECTED, numboxes); +} + + +/* + * These routines are concerned with the time-critical task of mapping input + * colors to the nearest color in the selected colormap. + * + * We re-use the histogram space as an "inverse color map", essentially a + * cache for the results of nearest-color searches. All colors within a + * histogram cell will be mapped to the same colormap entry, namely the one + * closest to the cell's center. This may not be quite the closest entry to + * the actual input color, but it's almost as good. A zero in the cache + * indicates we haven't found the nearest color for that cell yet; the array + * is cleared to zeroes before starting the mapping pass. When we find the + * nearest color for a cell, its colormap index plus one is recorded in the + * cache for future use. The pass2 scanning routines call fill_inverse_cmap + * when they need to use an unfilled entry in the cache. + * + * Our method of efficiently finding nearest colors is based on the "locally + * sorted search" idea described by Heckbert and on the incremental distance + * calculation described by Spencer W. Thomas in chapter III.1 of Graphics + * Gems II (James Arvo, ed. Academic Press, 1991). Thomas points out that + * the distances from a given colormap entry to each cell of the histogram can + * be computed quickly using an incremental method: the differences between + * distances to adjacent cells themselves differ by a constant. This allows a + * fairly fast implementation of the "brute force" approach of computing the + * distance from every colormap entry to every histogram cell. Unfortunately, + * it needs a work array to hold the best-distance-so-far for each histogram + * cell (because the inner loop has to be over cells, not colormap entries). + * The work array elements have to be INT32s, so the work array would need + * 256Kb at our recommended precision. This is not feasible in DOS machines. + * + * To get around these problems, we apply Thomas' method to compute the + * nearest colors for only the cells within a small subbox of the histogram. + * The work array need be only as big as the subbox, so the memory usage + * problem is solved. Furthermore, we need not fill subboxes that are never + * referenced in pass2; many images use only part of the color gamut, so a + * fair amount of work is saved. An additional advantage of this + * approach is that we can apply Heckbert's locality criterion to quickly + * eliminate colormap entries that are far away from the subbox; typically + * three-fourths of the colormap entries are rejected by Heckbert's criterion, + * and we need not compute their distances to individual cells in the subbox. + * The speed of this approach is heavily influenced by the subbox size: too + * small means too much overhead, too big loses because Heckbert's criterion + * can't eliminate as many colormap entries. Empirically the best subbox + * size seems to be about 1/512th of the histogram (1/8th in each direction). + * + * Thomas' article also describes a refined method which is asymptotically + * faster than the brute-force method, but it is also far more complex and + * cannot efficiently be applied to small subboxes. It is therefore not + * useful for programs intended to be portable to DOS machines. On machines + * with plenty of memory, filling the whole histogram in one shot with Thomas' + * refined method might be faster than the present code --- but then again, + * it might not be any faster, and it's certainly more complicated. + */ + + +/* log2(histogram cells in update box) for each axis; this can be adjusted */ +#define BOX_C0_LOG (HIST_C0_BITS-3) +#define BOX_C1_LOG (HIST_C1_BITS-3) +#define BOX_C2_LOG (HIST_C2_BITS-3) + +#define BOX_C0_ELEMS (1<actual_number_of_colors; + int maxc0, maxc1, maxc2; + int centerc0, centerc1, centerc2; + int i, x, ncolors; + INT32 minmaxdist, min_dist, max_dist, tdist; + INT32 mindist[MAXNUMCOLORS]; /* min distance to colormap entry i */ + + /* Compute true coordinates of update box's upper corner and center. + * Actually we compute the coordinates of the center of the upper-corner + * histogram cell, which are the upper bounds of the volume we care about. + * Note that since ">>" rounds down, the "center" values may be closer to + * min than to max; hence comparisons to them must be "<=", not "<". + */ + maxc0 = minc0 + ((1 << BOX_C0_SHIFT) - (1 << C0_SHIFT)); + centerc0 = (minc0 + maxc0) >> 1; + maxc1 = minc1 + ((1 << BOX_C1_SHIFT) - (1 << C1_SHIFT)); + centerc1 = (minc1 + maxc1) >> 1; + maxc2 = minc2 + ((1 << BOX_C2_SHIFT) - (1 << C2_SHIFT)); + centerc2 = (minc2 + maxc2) >> 1; + + /* For each color in colormap, find: + * 1. its minimum squared-distance to any point in the update box + * (zero if color is within update box); + * 2. its maximum squared-distance to any point in the update box. + * Both of these can be found by considering only the corners of the box. + * We save the minimum distance for each color in mindist[]; + * only the smallest maximum distance is of interest. + */ + minmaxdist = 0x7FFFFFFFL; + + for (i = 0; i < numcolors; i++) { + /* We compute the squared-c0-distance term, then add in the other two. */ + x = GETJSAMPLE(cinfo->colormap[0][i]); + if (x < minc0) { + tdist = (x - minc0) * C0_SCALE; + min_dist = tdist*tdist; + tdist = (x - maxc0) * C0_SCALE; + max_dist = tdist*tdist; + } else if (x > maxc0) { + tdist = (x - maxc0) * C0_SCALE; + min_dist = tdist*tdist; + tdist = (x - minc0) * C0_SCALE; + max_dist = tdist*tdist; + } else { + /* within cell range so no contribution to min_dist */ + min_dist = 0; + if (x <= centerc0) { + tdist = (x - maxc0) * C0_SCALE; + max_dist = tdist*tdist; + } else { + tdist = (x - minc0) * C0_SCALE; + max_dist = tdist*tdist; + } + } + + x = GETJSAMPLE(cinfo->colormap[1][i]); + if (x < minc1) { + tdist = (x - minc1) * C1_SCALE; + min_dist += tdist*tdist; + tdist = (x - maxc1) * C1_SCALE; + max_dist += tdist*tdist; + } else if (x > maxc1) { + tdist = (x - maxc1) * C1_SCALE; + min_dist += tdist*tdist; + tdist = (x - minc1) * C1_SCALE; + max_dist += tdist*tdist; + } else { + /* within cell range so no contribution to min_dist */ + if (x <= centerc1) { + tdist = (x - maxc1) * C1_SCALE; + max_dist += tdist*tdist; + } else { + tdist = (x - minc1) * C1_SCALE; + max_dist += tdist*tdist; + } + } + + x = GETJSAMPLE(cinfo->colormap[2][i]); + if (x < minc2) { + tdist = (x - minc2) * C2_SCALE; + min_dist += tdist*tdist; + tdist = (x - maxc2) * C2_SCALE; + max_dist += tdist*tdist; + } else if (x > maxc2) { + tdist = (x - maxc2) * C2_SCALE; + min_dist += tdist*tdist; + tdist = (x - minc2) * C2_SCALE; + max_dist += tdist*tdist; + } else { + /* within cell range so no contribution to min_dist */ + if (x <= centerc2) { + tdist = (x - maxc2) * C2_SCALE; + max_dist += tdist*tdist; + } else { + tdist = (x - minc2) * C2_SCALE; + max_dist += tdist*tdist; + } + } + + mindist[i] = min_dist; /* save away the results */ + if (max_dist < minmaxdist) + minmaxdist = max_dist; + } + + /* Now we know that no cell in the update box is more than minmaxdist + * away from some colormap entry. Therefore, only colors that are + * within minmaxdist of some part of the box need be considered. + */ + ncolors = 0; + for (i = 0; i < numcolors; i++) { + if (mindist[i] <= minmaxdist) + colorlist[ncolors++] = (JSAMPLE) i; + } + return ncolors; +} + + +LOCAL(void) +find_best_colors (j_decompress_ptr cinfo, int minc0, int minc1, int minc2, + int numcolors, JSAMPLE colorlist[], JSAMPLE bestcolor[]) +/* Find the closest colormap entry for each cell in the update box, + * given the list of candidate colors prepared by find_nearby_colors. + * Return the indexes of the closest entries in the bestcolor[] array. + * This routine uses Thomas' incremental distance calculation method to + * find the distance from a colormap entry to successive cells in the box. + */ +{ + int ic0, ic1, ic2; + int i, icolor; + register INT32 * bptr; /* pointer into bestdist[] array */ + JSAMPLE * cptr; /* pointer into bestcolor[] array */ + INT32 dist0, dist1; /* initial distance values */ + register INT32 dist2; /* current distance in inner loop */ + INT32 xx0, xx1; /* distance increments */ + register INT32 xx2; + INT32 inc0, inc1, inc2; /* initial values for increments */ + /* This array holds the distance to the nearest-so-far color for each cell */ + INT32 bestdist[BOX_C0_ELEMS * BOX_C1_ELEMS * BOX_C2_ELEMS]; + + /* Initialize best-distance for each cell of the update box */ + bptr = bestdist; + for (i = BOX_C0_ELEMS*BOX_C1_ELEMS*BOX_C2_ELEMS-1; i >= 0; i--) + *bptr++ = 0x7FFFFFFFL; + + /* For each color selected by find_nearby_colors, + * compute its distance to the center of each cell in the box. + * If that's less than best-so-far, update best distance and color number. + */ + + /* Nominal steps between cell centers ("x" in Thomas article) */ +#define STEP_C0 ((1 << C0_SHIFT) * C0_SCALE) +#define STEP_C1 ((1 << C1_SHIFT) * C1_SCALE) +#define STEP_C2 ((1 << C2_SHIFT) * C2_SCALE) + + for (i = 0; i < numcolors; i++) { + icolor = GETJSAMPLE(colorlist[i]); + /* Compute (square of) distance from minc0/c1/c2 to this color */ + inc0 = (minc0 - GETJSAMPLE(cinfo->colormap[0][icolor])) * C0_SCALE; + dist0 = inc0*inc0; + inc1 = (minc1 - GETJSAMPLE(cinfo->colormap[1][icolor])) * C1_SCALE; + dist0 += inc1*inc1; + inc2 = (minc2 - GETJSAMPLE(cinfo->colormap[2][icolor])) * C2_SCALE; + dist0 += inc2*inc2; + /* Form the initial difference increments */ + inc0 = inc0 * (2 * STEP_C0) + STEP_C0 * STEP_C0; + inc1 = inc1 * (2 * STEP_C1) + STEP_C1 * STEP_C1; + inc2 = inc2 * (2 * STEP_C2) + STEP_C2 * STEP_C2; + /* Now loop over all cells in box, updating distance per Thomas method */ + bptr = bestdist; + cptr = bestcolor; + xx0 = inc0; + for (ic0 = BOX_C0_ELEMS-1; ic0 >= 0; ic0--) { + dist1 = dist0; + xx1 = inc1; + for (ic1 = BOX_C1_ELEMS-1; ic1 >= 0; ic1--) { + dist2 = dist1; + xx2 = inc2; + for (ic2 = BOX_C2_ELEMS-1; ic2 >= 0; ic2--) { + if (dist2 < *bptr) { + *bptr = dist2; + *cptr = (JSAMPLE) icolor; + } + dist2 += xx2; + xx2 += 2 * STEP_C2 * STEP_C2; + bptr++; + cptr++; + } + dist1 += xx1; + xx1 += 2 * STEP_C1 * STEP_C1; + } + dist0 += xx0; + xx0 += 2 * STEP_C0 * STEP_C0; + } + } +} + + +LOCAL(void) +fill_inverse_cmap (j_decompress_ptr cinfo, int c0, int c1, int c2) +/* Fill the inverse-colormap entries in the update box that contains */ +/* histogram cell c0/c1/c2. (Only that one cell MUST be filled, but */ +/* we can fill as many others as we wish.) */ +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + hist3d histogram = cquantize->histogram; + int minc0, minc1, minc2; /* lower left corner of update box */ + int ic0, ic1, ic2; + register JSAMPLE * cptr; /* pointer into bestcolor[] array */ + register histptr cachep; /* pointer into main cache array */ + /* This array lists the candidate colormap indexes. */ + JSAMPLE colorlist[MAXNUMCOLORS]; + int numcolors; /* number of candidate colors */ + /* This array holds the actually closest colormap index for each cell. */ + JSAMPLE bestcolor[BOX_C0_ELEMS * BOX_C1_ELEMS * BOX_C2_ELEMS]; + + /* Convert cell coordinates to update box ID */ + c0 >>= BOX_C0_LOG; + c1 >>= BOX_C1_LOG; + c2 >>= BOX_C2_LOG; + + /* Compute true coordinates of update box's origin corner. + * Actually we compute the coordinates of the center of the corner + * histogram cell, which are the lower bounds of the volume we care about. + */ + minc0 = (c0 << BOX_C0_SHIFT) + ((1 << C0_SHIFT) >> 1); + minc1 = (c1 << BOX_C1_SHIFT) + ((1 << C1_SHIFT) >> 1); + minc2 = (c2 << BOX_C2_SHIFT) + ((1 << C2_SHIFT) >> 1); + + /* Determine which colormap entries are close enough to be candidates + * for the nearest entry to some cell in the update box. + */ + numcolors = find_nearby_colors(cinfo, minc0, minc1, minc2, colorlist); + + /* Determine the actually nearest colors. */ + find_best_colors(cinfo, minc0, minc1, minc2, numcolors, colorlist, + bestcolor); + + /* Save the best color numbers (plus 1) in the main cache array */ + c0 <<= BOX_C0_LOG; /* convert ID back to base cell indexes */ + c1 <<= BOX_C1_LOG; + c2 <<= BOX_C2_LOG; + cptr = bestcolor; + for (ic0 = 0; ic0 < BOX_C0_ELEMS; ic0++) { + for (ic1 = 0; ic1 < BOX_C1_ELEMS; ic1++) { + cachep = & histogram[c0+ic0][c1+ic1][c2]; + for (ic2 = 0; ic2 < BOX_C2_ELEMS; ic2++) { + *cachep++ = (histcell) (GETJSAMPLE(*cptr++) + 1); + } + } + } +} + + +/* + * Map some rows of pixels to the output colormapped representation. + */ + +METHODDEF(void) +pass2_no_dither (j_decompress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPARRAY output_buf, int num_rows) +/* This version performs no dithering */ +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + hist3d histogram = cquantize->histogram; + register JSAMPROW inptr, outptr; + register histptr cachep; + register int c0, c1, c2; + int row; + JDIMENSION col; + JDIMENSION width = cinfo->output_width; + + for (row = 0; row < num_rows; row++) { + inptr = input_buf[row]; + outptr = output_buf[row]; + for (col = width; col > 0; col--) { + /* get pixel value and index into the cache */ + c0 = GETJSAMPLE(*inptr++) >> C0_SHIFT; + c1 = GETJSAMPLE(*inptr++) >> C1_SHIFT; + c2 = GETJSAMPLE(*inptr++) >> C2_SHIFT; + cachep = & histogram[c0][c1][c2]; + /* If we have not seen this color before, find nearest colormap entry */ + /* and update the cache */ + if (*cachep == 0) + fill_inverse_cmap(cinfo, c0,c1,c2); + /* Now emit the colormap index for this cell */ + *outptr++ = (JSAMPLE) (*cachep - 1); + } + } +} + + +METHODDEF(void) +pass2_fs_dither (j_decompress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPARRAY output_buf, int num_rows) +/* This version performs Floyd-Steinberg dithering */ +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + hist3d histogram = cquantize->histogram; + register LOCFSERROR cur0, cur1, cur2; /* current error or pixel value */ + LOCFSERROR belowerr0, belowerr1, belowerr2; /* error for pixel below cur */ + LOCFSERROR bpreverr0, bpreverr1, bpreverr2; /* error for below/prev col */ + register FSERRPTR errorptr; /* => fserrors[] at column before current */ + JSAMPROW inptr; /* => current input pixel */ + JSAMPROW outptr; /* => current output pixel */ + histptr cachep; + int dir; /* +1 or -1 depending on direction */ + int dir3; /* 3*dir, for advancing inptr & errorptr */ + int row; + JDIMENSION col; + JDIMENSION width = cinfo->output_width; + JSAMPLE *range_limit = cinfo->sample_range_limit; + int *error_limit = cquantize->error_limiter; + JSAMPROW colormap0 = cinfo->colormap[0]; + JSAMPROW colormap1 = cinfo->colormap[1]; + JSAMPROW colormap2 = cinfo->colormap[2]; + SHIFT_TEMPS + + for (row = 0; row < num_rows; row++) { + inptr = input_buf[row]; + outptr = output_buf[row]; + if (cquantize->on_odd_row) { + /* work right to left in this row */ + inptr += (width-1) * 3; /* so point to rightmost pixel */ + outptr += width-1; + dir = -1; + dir3 = -3; + errorptr = cquantize->fserrors + (width+1)*3; /* => entry after last column */ + cquantize->on_odd_row = FALSE; /* flip for next time */ + } else { + /* work left to right in this row */ + dir = 1; + dir3 = 3; + errorptr = cquantize->fserrors; /* => entry before first real column */ + cquantize->on_odd_row = TRUE; /* flip for next time */ + } + /* Preset error values: no error propagated to first pixel from left */ + cur0 = cur1 = cur2 = 0; + /* and no error propagated to row below yet */ + belowerr0 = belowerr1 = belowerr2 = 0; + bpreverr0 = bpreverr1 = bpreverr2 = 0; + + for (col = width; col > 0; col--) { + /* curN holds the error propagated from the previous pixel on the + * current line. Add the error propagated from the previous line + * to form the complete error correction term for this pixel, and + * round the error term (which is expressed * 16) to an integer. + * RIGHT_SHIFT rounds towards minus infinity, so adding 8 is correct + * for either sign of the error value. + * Note: errorptr points to *previous* column's array entry. + */ + cur0 = RIGHT_SHIFT(cur0 + errorptr[dir3+0] + 8, 4); + cur1 = RIGHT_SHIFT(cur1 + errorptr[dir3+1] + 8, 4); + cur2 = RIGHT_SHIFT(cur2 + errorptr[dir3+2] + 8, 4); + /* Limit the error using transfer function set by init_error_limit. + * See comments with init_error_limit for rationale. + */ + cur0 = error_limit[cur0]; + cur1 = error_limit[cur1]; + cur2 = error_limit[cur2]; + /* Form pixel value + error, and range-limit to 0..MAXJSAMPLE. + * The maximum error is +- MAXJSAMPLE (or less with error limiting); + * this sets the required size of the range_limit array. + */ + cur0 += GETJSAMPLE(inptr[0]); + cur1 += GETJSAMPLE(inptr[1]); + cur2 += GETJSAMPLE(inptr[2]); + cur0 = GETJSAMPLE(range_limit[cur0]); + cur1 = GETJSAMPLE(range_limit[cur1]); + cur2 = GETJSAMPLE(range_limit[cur2]); + /* Index into the cache with adjusted pixel value */ + cachep = & histogram[cur0>>C0_SHIFT][cur1>>C1_SHIFT][cur2>>C2_SHIFT]; + /* If we have not seen this color before, find nearest colormap */ + /* entry and update the cache */ + if (*cachep == 0) + fill_inverse_cmap(cinfo, cur0>>C0_SHIFT,cur1>>C1_SHIFT,cur2>>C2_SHIFT); + /* Now emit the colormap index for this cell */ + { register int pixcode = *cachep - 1; + *outptr = (JSAMPLE) pixcode; + /* Compute representation error for this pixel */ + cur0 -= GETJSAMPLE(colormap0[pixcode]); + cur1 -= GETJSAMPLE(colormap1[pixcode]); + cur2 -= GETJSAMPLE(colormap2[pixcode]); + } + /* Compute error fractions to be propagated to adjacent pixels. + * Add these into the running sums, and simultaneously shift the + * next-line error sums left by 1 column. + */ + { register LOCFSERROR bnexterr, delta; + + bnexterr = cur0; /* Process component 0 */ + delta = cur0 * 2; + cur0 += delta; /* form error * 3 */ + errorptr[0] = (FSERROR) (bpreverr0 + cur0); + cur0 += delta; /* form error * 5 */ + bpreverr0 = belowerr0 + cur0; + belowerr0 = bnexterr; + cur0 += delta; /* form error * 7 */ + bnexterr = cur1; /* Process component 1 */ + delta = cur1 * 2; + cur1 += delta; /* form error * 3 */ + errorptr[1] = (FSERROR) (bpreverr1 + cur1); + cur1 += delta; /* form error * 5 */ + bpreverr1 = belowerr1 + cur1; + belowerr1 = bnexterr; + cur1 += delta; /* form error * 7 */ + bnexterr = cur2; /* Process component 2 */ + delta = cur2 * 2; + cur2 += delta; /* form error * 3 */ + errorptr[2] = (FSERROR) (bpreverr2 + cur2); + cur2 += delta; /* form error * 5 */ + bpreverr2 = belowerr2 + cur2; + belowerr2 = bnexterr; + cur2 += delta; /* form error * 7 */ + } + /* At this point curN contains the 7/16 error value to be propagated + * to the next pixel on the current line, and all the errors for the + * next line have been shifted over. We are therefore ready to move on. + */ + inptr += dir3; /* Advance pixel pointers to next column */ + outptr += dir; + errorptr += dir3; /* advance errorptr to current column */ + } + /* Post-loop cleanup: we must unload the final error values into the + * final fserrors[] entry. Note we need not unload belowerrN because + * it is for the dummy column before or after the actual array. + */ + errorptr[0] = (FSERROR) bpreverr0; /* unload prev errs into array */ + errorptr[1] = (FSERROR) bpreverr1; + errorptr[2] = (FSERROR) bpreverr2; + } +} + + +/* + * Initialize the error-limiting transfer function (lookup table). + * The raw F-S error computation can potentially compute error values of up to + * +- MAXJSAMPLE. But we want the maximum correction applied to a pixel to be + * much less, otherwise obviously wrong pixels will be created. (Typical + * effects include weird fringes at color-area boundaries, isolated bright + * pixels in a dark area, etc.) The standard advice for avoiding this problem + * is to ensure that the "corners" of the color cube are allocated as output + * colors; then repeated errors in the same direction cannot cause cascading + * error buildup. However, that only prevents the error from getting + * completely out of hand; Aaron Giles reports that error limiting improves + * the results even with corner colors allocated. + * A simple clamping of the error values to about +- MAXJSAMPLE/8 works pretty + * well, but the smoother transfer function used below is even better. Thanks + * to Aaron Giles for this idea. + */ + +LOCAL(void) +init_error_limit (j_decompress_ptr cinfo) +/* Allocate and fill in the error_limiter table */ +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + int * table; + int in, out; + + table = (int *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, (MAXJSAMPLE*2+1) * SIZEOF(int)); + table += MAXJSAMPLE; /* so can index -MAXJSAMPLE .. +MAXJSAMPLE */ + cquantize->error_limiter = table; + +#define STEPSIZE ((MAXJSAMPLE+1)/16) + /* Map errors 1:1 up to +- MAXJSAMPLE/16 */ + out = 0; + for (in = 0; in < STEPSIZE; in++, out++) { + table[in] = out; table[-in] = -out; + } + /* Map errors 1:2 up to +- 3*MAXJSAMPLE/16 */ + for (; in < STEPSIZE*3; in++, out += (in&1) ? 0 : 1) { + table[in] = out; table[-in] = -out; + } + /* Clamp the rest to final out value (which is (MAXJSAMPLE+1)/8) */ + for (; in <= MAXJSAMPLE; in++) { + table[in] = out; table[-in] = -out; + } +#undef STEPSIZE +} + + +/* + * Finish up at the end of each pass. + */ + +METHODDEF(void) +finish_pass1 (j_decompress_ptr cinfo) +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + + /* Select the representative colors and fill in cinfo->colormap */ + cinfo->colormap = cquantize->sv_colormap; + select_colors(cinfo, cquantize->desired); + /* Force next pass to zero the color index table */ + cquantize->needs_zeroed = TRUE; +} + + +METHODDEF(void) +finish_pass2 (j_decompress_ptr cinfo) +{ + /* no work */ +} + + +/* + * Initialize for each processing pass. + */ + +METHODDEF(void) +start_pass_2_quant (j_decompress_ptr cinfo, boolean is_pre_scan) +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + hist3d histogram = cquantize->histogram; + int i; + + /* Only F-S dithering or no dithering is supported. */ + /* If user asks for ordered dither, give him F-S. */ + if (cinfo->dither_mode != JDITHER_NONE) + cinfo->dither_mode = JDITHER_FS; + + if (is_pre_scan) { + /* Set up method pointers */ + cquantize->pub.color_quantize = prescan_quantize; + cquantize->pub.finish_pass = finish_pass1; + cquantize->needs_zeroed = TRUE; /* Always zero histogram */ + } else { + /* Set up method pointers */ + if (cinfo->dither_mode == JDITHER_FS) + cquantize->pub.color_quantize = pass2_fs_dither; + else + cquantize->pub.color_quantize = pass2_no_dither; + cquantize->pub.finish_pass = finish_pass2; + + /* Make sure color count is acceptable */ + i = cinfo->actual_number_of_colors; + if (i < 1) + ERREXIT1(cinfo, JERR_QUANT_FEW_COLORS, 1); + if (i > MAXNUMCOLORS) + ERREXIT1(cinfo, JERR_QUANT_MANY_COLORS, MAXNUMCOLORS); + + if (cinfo->dither_mode == JDITHER_FS) { + size_t arraysize = (size_t) ((cinfo->output_width + 2) * + (3 * SIZEOF(FSERROR))); + /* Allocate Floyd-Steinberg workspace if we didn't already. */ + if (cquantize->fserrors == NULL) + cquantize->fserrors = (FSERRPTR) (*cinfo->mem->alloc_large) + ((j_common_ptr) cinfo, JPOOL_IMAGE, arraysize); + /* Initialize the propagated errors to zero. */ + FMEMZERO((void FAR *) cquantize->fserrors, arraysize); + /* Make the error-limit table if we didn't already. */ + if (cquantize->error_limiter == NULL) + init_error_limit(cinfo); + cquantize->on_odd_row = FALSE; + } + + } + /* Zero the histogram or inverse color map, if necessary */ + if (cquantize->needs_zeroed) { + for (i = 0; i < HIST_C0_ELEMS; i++) { + FMEMZERO((void FAR *) histogram[i], + HIST_C1_ELEMS*HIST_C2_ELEMS * SIZEOF(histcell)); + } + cquantize->needs_zeroed = FALSE; + } +} + + +/* + * Switch to a new external colormap between output passes. + */ + +METHODDEF(void) +new_color_map_2_quant (j_decompress_ptr cinfo) +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + + /* Reset the inverse color map */ + cquantize->needs_zeroed = TRUE; +} + + +/* + * Module initialization routine for 2-pass color quantization. + */ + +GLOBAL(void) +jinit_2pass_quantizer (j_decompress_ptr cinfo) +{ + my_cquantize_ptr cquantize; + int i; + + cquantize = (my_cquantize_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_cquantizer)); + cinfo->cquantize = (struct jpeg_color_quantizer *) cquantize; + cquantize->pub.start_pass = start_pass_2_quant; + cquantize->pub.new_color_map = new_color_map_2_quant; + cquantize->fserrors = NULL; /* flag optional arrays not allocated */ + cquantize->error_limiter = NULL; + + /* Make sure jdmaster didn't give me a case I can't handle */ + if (cinfo->out_color_components != 3) + ERREXIT(cinfo, JERR_NOTIMPL); + + /* Allocate the histogram/inverse colormap storage */ + cquantize->histogram = (hist3d) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, HIST_C0_ELEMS * SIZEOF(hist2d)); + for (i = 0; i < HIST_C0_ELEMS; i++) { + cquantize->histogram[i] = (hist2d) (*cinfo->mem->alloc_large) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + HIST_C1_ELEMS*HIST_C2_ELEMS * SIZEOF(histcell)); + } + cquantize->needs_zeroed = TRUE; /* histogram is garbage now */ + + /* Allocate storage for the completed colormap, if required. + * We do this now since it is FAR storage and may affect + * the memory manager's space calculations. + */ + if (cinfo->enable_2pass_quant) { + /* Make sure color count is acceptable */ + int desired = cinfo->desired_number_of_colors; + /* Lower bound on # of colors ... somewhat arbitrary as long as > 0 */ + if (desired < 8) + ERREXIT1(cinfo, JERR_QUANT_FEW_COLORS, 8); + /* Make sure colormap indexes can be represented by JSAMPLEs */ + if (desired > MAXNUMCOLORS) + ERREXIT1(cinfo, JERR_QUANT_MANY_COLORS, MAXNUMCOLORS); + cquantize->sv_colormap = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo,JPOOL_IMAGE, (JDIMENSION) desired, (JDIMENSION) 3); + cquantize->desired = desired; + } else + cquantize->sv_colormap = NULL; + + /* Only F-S dithering or no dithering is supported. */ + /* If user asks for ordered dither, give him F-S. */ + if (cinfo->dither_mode != JDITHER_NONE) + cinfo->dither_mode = JDITHER_FS; + + /* Allocate Floyd-Steinberg workspace if necessary. + * This isn't really needed until pass 2, but again it is FAR storage. + * Although we will cope with a later change in dither_mode, + * we do not promise to honor max_memory_to_use if dither_mode changes. + */ + if (cinfo->dither_mode == JDITHER_FS) { + cquantize->fserrors = (FSERRPTR) (*cinfo->mem->alloc_large) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (size_t) ((cinfo->output_width + 2) * (3 * SIZEOF(FSERROR)))); + /* Might as well create the error-limiting table too. */ + init_error_limit(cinfo); + } +} + +#endif /* QUANT_2PASS_SUPPORTED */ diff --git a/compat/libjpeg/jutils.c b/compat/libjpeg/jutils.c new file mode 100755 index 0000000..037a795 --- /dev/null +++ b/compat/libjpeg/jutils.c @@ -0,0 +1,227 @@ +/* + * jutils.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * Modified 2009-2011 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains tables and miscellaneous utility routines needed + * for both compression and decompression. + * Note we prefix all global names with "j" to minimize conflicts with + * a surrounding application. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * jpeg_zigzag_order[i] is the zigzag-order position of the i'th element + * of a DCT block read in natural order (left to right, top to bottom). + */ + +#if 0 /* This table is not actually needed in v6a */ + +const int jpeg_zigzag_order[DCTSIZE2] = { + 0, 1, 5, 6, 14, 15, 27, 28, + 2, 4, 7, 13, 16, 26, 29, 42, + 3, 8, 12, 17, 25, 30, 41, 43, + 9, 11, 18, 24, 31, 40, 44, 53, + 10, 19, 23, 32, 39, 45, 52, 54, + 20, 22, 33, 38, 46, 51, 55, 60, + 21, 34, 37, 47, 50, 56, 59, 61, + 35, 36, 48, 49, 57, 58, 62, 63 +}; + +#endif + +/* + * jpeg_natural_order[i] is the natural-order position of the i'th element + * of zigzag order. + * + * When reading corrupted data, the Huffman decoders could attempt + * to reference an entry beyond the end of this array (if the decoded + * zero run length reaches past the end of the block). To prevent + * wild stores without adding an inner-loop test, we put some extra + * "63"s after the real entries. This will cause the extra coefficient + * to be stored in location 63 of the block, not somewhere random. + * The worst case would be a run-length of 15, which means we need 16 + * fake entries. + */ + +const int jpeg_natural_order[DCTSIZE2+16] = { + 0, 1, 8, 16, 9, 2, 3, 10, + 17, 24, 32, 25, 18, 11, 4, 5, + 12, 19, 26, 33, 40, 48, 41, 34, + 27, 20, 13, 6, 7, 14, 21, 28, + 35, 42, 49, 56, 57, 50, 43, 36, + 29, 22, 15, 23, 30, 37, 44, 51, + 58, 59, 52, 45, 38, 31, 39, 46, + 53, 60, 61, 54, 47, 55, 62, 63, + 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ + 63, 63, 63, 63, 63, 63, 63, 63 +}; + +const int jpeg_natural_order7[7*7+16] = { + 0, 1, 8, 16, 9, 2, 3, 10, + 17, 24, 32, 25, 18, 11, 4, 5, + 12, 19, 26, 33, 40, 48, 41, 34, + 27, 20, 13, 6, 14, 21, 28, 35, + 42, 49, 50, 43, 36, 29, 22, 30, + 37, 44, 51, 52, 45, 38, 46, 53, + 54, + 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ + 63, 63, 63, 63, 63, 63, 63, 63 +}; + +const int jpeg_natural_order6[6*6+16] = { + 0, 1, 8, 16, 9, 2, 3, 10, + 17, 24, 32, 25, 18, 11, 4, 5, + 12, 19, 26, 33, 40, 41, 34, 27, + 20, 13, 21, 28, 35, 42, 43, 36, + 29, 37, 44, 45, + 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ + 63, 63, 63, 63, 63, 63, 63, 63 +}; + +const int jpeg_natural_order5[5*5+16] = { + 0, 1, 8, 16, 9, 2, 3, 10, + 17, 24, 32, 25, 18, 11, 4, 12, + 19, 26, 33, 34, 27, 20, 28, 35, + 36, + 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ + 63, 63, 63, 63, 63, 63, 63, 63 +}; + +const int jpeg_natural_order4[4*4+16] = { + 0, 1, 8, 16, 9, 2, 3, 10, + 17, 24, 25, 18, 11, 19, 26, 27, + 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ + 63, 63, 63, 63, 63, 63, 63, 63 +}; + +const int jpeg_natural_order3[3*3+16] = { + 0, 1, 8, 16, 9, 2, 10, 17, + 18, + 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ + 63, 63, 63, 63, 63, 63, 63, 63 +}; + +const int jpeg_natural_order2[2*2+16] = { + 0, 1, 8, 9, + 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ + 63, 63, 63, 63, 63, 63, 63, 63 +}; + + +/* + * Arithmetic utilities + */ + +GLOBAL(long) +jdiv_round_up (long a, long b) +/* Compute a/b rounded up to next integer, ie, ceil(a/b) */ +/* Assumes a >= 0, b > 0 */ +{ + return (a + b - 1L) / b; +} + + +GLOBAL(long) +jround_up (long a, long b) +/* Compute a rounded up to next multiple of b, ie, ceil(a/b)*b */ +/* Assumes a >= 0, b > 0 */ +{ + a += b - 1L; + return a - (a % b); +} + + +/* On normal machines we can apply MEMCOPY() and MEMZERO() to sample arrays + * and coefficient-block arrays. This won't work on 80x86 because the arrays + * are FAR and we're assuming a small-pointer memory model. However, some + * DOS compilers provide far-pointer versions of memcpy() and memset() even + * in the small-model libraries. These will be used if USE_FMEM is defined. + * Otherwise, the routines below do it the hard way. (The performance cost + * is not all that great, because these routines aren't very heavily used.) + */ + +#ifndef NEED_FAR_POINTERS /* normal case, same as regular macro */ +#define FMEMCOPY(dest,src,size) MEMCOPY(dest,src,size) +#else /* 80x86 case, define if we can */ +#ifdef USE_FMEM +#define FMEMCOPY(dest,src,size) _fmemcpy((void FAR *)(dest), (const void FAR *)(src), (size_t)(size)) +#else +/* This function is for use by the FMEMZERO macro defined in jpegint.h. + * Do not call this function directly, use the FMEMZERO macro instead. + */ +GLOBAL(void) +jzero_far (void FAR * target, size_t bytestozero) +/* Zero out a chunk of FAR memory. */ +/* This might be sample-array data, block-array data, or alloc_large data. */ +{ + register char FAR * ptr = (char FAR *) target; + register size_t count; + + for (count = bytestozero; count > 0; count--) { + *ptr++ = 0; + } +} +#endif +#endif + + +GLOBAL(void) +jcopy_sample_rows (JSAMPARRAY input_array, int source_row, + JSAMPARRAY output_array, int dest_row, + int num_rows, JDIMENSION num_cols) +/* Copy some rows of samples from one place to another. + * num_rows rows are copied from input_array[source_row++] + * to output_array[dest_row++]; these areas may overlap for duplication. + * The source and destination arrays must be at least as wide as num_cols. + */ +{ + register JSAMPROW inptr, outptr; +#ifdef FMEMCOPY + register size_t count = (size_t) (num_cols * SIZEOF(JSAMPLE)); +#else + register JDIMENSION count; +#endif + register int row; + + input_array += source_row; + output_array += dest_row; + + for (row = num_rows; row > 0; row--) { + inptr = *input_array++; + outptr = *output_array++; +#ifdef FMEMCOPY + FMEMCOPY(outptr, inptr, count); +#else + for (count = num_cols; count > 0; count--) + *outptr++ = *inptr++; /* needn't bother with GETJSAMPLE() here */ +#endif + } +} + + +GLOBAL(void) +jcopy_block_row (JBLOCKROW input_row, JBLOCKROW output_row, + JDIMENSION num_blocks) +/* Copy a row of coefficient blocks from one place to another. */ +{ +#ifdef FMEMCOPY + FMEMCOPY(output_row, input_row, num_blocks * (DCTSIZE2 * SIZEOF(JCOEF))); +#else + register JCOEFPTR inptr, outptr; + register long count; + + inptr = (JCOEFPTR) input_row; + outptr = (JCOEFPTR) output_row; + for (count = (long) num_blocks * DCTSIZE2; count > 0; count--) { + *outptr++ = *inptr++; + } +#endif +} diff --git a/compat/libjpeg/jversion.h b/compat/libjpeg/jversion.h new file mode 100755 index 0000000..bb53ffe --- /dev/null +++ b/compat/libjpeg/jversion.h @@ -0,0 +1,14 @@ +/* + * jversion.h + * + * Copyright (C) 1991-2016, Thomas G. Lane, Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains software version identification. + */ + + +#define JVERSION "9b 17-Jan-2016" + +#define JCOPYRIGHT "Copyright (C) 2016, Thomas G. Lane, Guido Vollbeding" diff --git a/compat/libjpeg/libjpeg.map b/compat/libjpeg/libjpeg.map new file mode 100755 index 0000000..fa70b1f --- /dev/null +++ b/compat/libjpeg/libjpeg.map @@ -0,0 +1,4 @@ +LIBJPEG_9.0 { + global: + *; +}; diff --git a/compat/libjpeg/libjpeg.txt b/compat/libjpeg/libjpeg.txt new file mode 100755 index 0000000..b602ab3 --- /dev/null +++ b/compat/libjpeg/libjpeg.txt @@ -0,0 +1,3111 @@ +USING THE IJG JPEG LIBRARY + +Copyright (C) 1994-2013, Thomas G. Lane, Guido Vollbeding. +This file is part of the Independent JPEG Group's software. +For conditions of distribution and use, see the accompanying README file. + + +This file describes how to use the IJG JPEG library within an application +program. Read it if you want to write a program that uses the library. + +The file example.c provides heavily commented skeleton code for calling the +JPEG library. Also see jpeglib.h (the include file to be used by application +programs) for full details about data structures and function parameter lists. +The library source code, of course, is the ultimate reference. + +Note that there have been *major* changes from the application interface +presented by IJG version 4 and earlier versions. The old design had several +inherent limitations, and it had accumulated a lot of cruft as we added +features while trying to minimize application-interface changes. We have +sacrificed backward compatibility in the version 5 rewrite, but we think the +improvements justify this. + + +TABLE OF CONTENTS +----------------- + +Overview: + Functions provided by the library + Outline of typical usage +Basic library usage: + Data formats + Compression details + Decompression details + Mechanics of usage: include files, linking, etc +Advanced features: + Compression parameter selection + Decompression parameter selection + Special color spaces + Error handling + Compressed data handling (source and destination managers) + I/O suspension + Progressive JPEG support + Buffered-image mode + Abbreviated datastreams and multiple images + Special markers + Raw (downsampled) image data + Really raw data: DCT coefficients + Progress monitoring + Memory management + Memory usage + Library compile-time options + Portability considerations + Notes for MS-DOS implementors + +You should read at least the overview and basic usage sections before trying +to program with the library. The sections on advanced features can be read +if and when you need them. + + +OVERVIEW +======== + +Functions provided by the library +--------------------------------- + +The IJG JPEG library provides C code to read and write JPEG-compressed image +files. The surrounding application program receives or supplies image data a +scanline at a time, using a straightforward uncompressed image format. All +details of color conversion and other preprocessing/postprocessing can be +handled by the library. + +The library includes a substantial amount of code that is not covered by the +JPEG standard but is necessary for typical applications of JPEG. These +functions preprocess the image before JPEG compression or postprocess it after +decompression. They include colorspace conversion, downsampling/upsampling, +and color quantization. The application indirectly selects use of this code +by specifying the format in which it wishes to supply or receive image data. +For example, if colormapped output is requested, then the decompression +library automatically invokes color quantization. + +A wide range of quality vs. speed tradeoffs are possible in JPEG processing, +and even more so in decompression postprocessing. The decompression library +provides multiple implementations that cover most of the useful tradeoffs, +ranging from very-high-quality down to fast-preview operation. On the +compression side we have generally not provided low-quality choices, since +compression is normally less time-critical. It should be understood that the +low-quality modes may not meet the JPEG standard's accuracy requirements; +nonetheless, they are useful for viewers. + +A word about functions *not* provided by the library. We handle a subset of +the ISO JPEG standard; most baseline, extended-sequential, and progressive +JPEG processes are supported. (Our subset includes all features now in common +use.) Unsupported ISO options include: + * Hierarchical storage + * Lossless JPEG + * DNL marker + * Nonintegral subsampling ratios +We support 8-bit to 12-bit data precision, but this is a compile-time choice +rather than a run-time choice; hence it is difficult to use different +precisions in a single application. + +By itself, the library handles only interchange JPEG datastreams --- in +particular the widely used JFIF file format. The library can be used by +surrounding code to process interchange or abbreviated JPEG datastreams that +are embedded in more complex file formats. (For example, this library is +used by the free LIBTIFF library to support JPEG compression in TIFF.) + + +Outline of typical usage +------------------------ + +The rough outline of a JPEG compression operation is: + + Allocate and initialize a JPEG compression object + Specify the destination for the compressed data (eg, a file) + Set parameters for compression, including image size & colorspace + jpeg_start_compress(...); + while (scan lines remain to be written) + jpeg_write_scanlines(...); + jpeg_finish_compress(...); + Release the JPEG compression object + +A JPEG compression object holds parameters and working state for the JPEG +library. We make creation/destruction of the object separate from starting +or finishing compression of an image; the same object can be re-used for a +series of image compression operations. This makes it easy to re-use the +same parameter settings for a sequence of images. Re-use of a JPEG object +also has important implications for processing abbreviated JPEG datastreams, +as discussed later. + +The image data to be compressed is supplied to jpeg_write_scanlines() from +in-memory buffers. If the application is doing file-to-file compression, +reading image data from the source file is the application's responsibility. +The library emits compressed data by calling a "data destination manager", +which typically will write the data into a file; but the application can +provide its own destination manager to do something else. + +Similarly, the rough outline of a JPEG decompression operation is: + + Allocate and initialize a JPEG decompression object + Specify the source of the compressed data (eg, a file) + Call jpeg_read_header() to obtain image info + Set parameters for decompression + jpeg_start_decompress(...); + while (scan lines remain to be read) + jpeg_read_scanlines(...); + jpeg_finish_decompress(...); + Release the JPEG decompression object + +This is comparable to the compression outline except that reading the +datastream header is a separate step. This is helpful because information +about the image's size, colorspace, etc is available when the application +selects decompression parameters. For example, the application can choose an +output scaling ratio that will fit the image into the available screen size. + +The decompression library obtains compressed data by calling a data source +manager, which typically will read the data from a file; but other behaviors +can be obtained with a custom source manager. Decompressed data is delivered +into in-memory buffers passed to jpeg_read_scanlines(). + +It is possible to abort an incomplete compression or decompression operation +by calling jpeg_abort(); or, if you do not need to retain the JPEG object, +simply release it by calling jpeg_destroy(). + +JPEG compression and decompression objects are two separate struct types. +However, they share some common fields, and certain routines such as +jpeg_destroy() can work on either type of object. + +The JPEG library has no static variables: all state is in the compression +or decompression object. Therefore it is possible to process multiple +compression and decompression operations concurrently, using multiple JPEG +objects. + +Both compression and decompression can be done in an incremental memory-to- +memory fashion, if suitable source/destination managers are used. See the +section on "I/O suspension" for more details. + + +BASIC LIBRARY USAGE +=================== + +Data formats +------------ + +Before diving into procedural details, it is helpful to understand the +image data format that the JPEG library expects or returns. + +The standard input image format is a rectangular array of pixels, with each +pixel having the same number of "component" or "sample" values (color +channels). You must specify how many components there are and the colorspace +interpretation of the components. Most applications will use RGB data +(three components per pixel) or grayscale data (one component per pixel). +PLEASE NOTE THAT RGB DATA IS THREE SAMPLES PER PIXEL, GRAYSCALE ONLY ONE. +A remarkable number of people manage to miss this, only to find that their +programs don't work with grayscale JPEG files. + +There is no provision for colormapped input. JPEG files are always full-color +or full grayscale (or sometimes another colorspace such as CMYK). You can +feed in a colormapped image by expanding it to full-color format. However +JPEG often doesn't work very well with source data that has been colormapped, +because of dithering noise. This is discussed in more detail in the JPEG FAQ +and the other references mentioned in the README file. + +Pixels are stored by scanlines, with each scanline running from left to +right. The component values for each pixel are adjacent in the row; for +example, R,G,B,R,G,B,R,G,B,... for 24-bit RGB color. Each scanline is an +array of data type JSAMPLE --- which is typically "unsigned char", unless +you've changed jmorecfg.h. (You can also change the RGB pixel layout, say +to B,G,R order, by modifying jmorecfg.h. But see the restrictions listed in +that file before doing so.) + +A 2-D array of pixels is formed by making a list of pointers to the starts of +scanlines; so the scanlines need not be physically adjacent in memory. Even +if you process just one scanline at a time, you must make a one-element +pointer array to conform to this structure. Pointers to JSAMPLE rows are of +type JSAMPROW, and the pointer to the pointer array is of type JSAMPARRAY. + +The library accepts or supplies one or more complete scanlines per call. +It is not possible to process part of a row at a time. Scanlines are always +processed top-to-bottom. You can process an entire image in one call if you +have it all in memory, but usually it's simplest to process one scanline at +a time. + +For best results, source data values should have the precision specified by +BITS_IN_JSAMPLE (normally 8 bits). For instance, if you choose to compress +data that's only 6 bits/channel, you should left-justify each value in a +byte before passing it to the compressor. If you need to compress data +that has more than 8 bits/channel, compile with BITS_IN_JSAMPLE = 9 to 12. +(See "Library compile-time options", later.) + + +The data format returned by the decompressor is the same in all details, +except that colormapped output is supported. (Again, a JPEG file is never +colormapped. But you can ask the decompressor to perform on-the-fly color +quantization to deliver colormapped output.) If you request colormapped +output then the returned data array contains a single JSAMPLE per pixel; +its value is an index into a color map. The color map is represented as +a 2-D JSAMPARRAY in which each row holds the values of one color component, +that is, colormap[i][j] is the value of the i'th color component for pixel +value (map index) j. Note that since the colormap indexes are stored in +JSAMPLEs, the maximum number of colors is limited by the size of JSAMPLE +(ie, at most 256 colors for an 8-bit JPEG library). + + +Compression details +------------------- + +Here we revisit the JPEG compression outline given in the overview. + +1. Allocate and initialize a JPEG compression object. + +A JPEG compression object is a "struct jpeg_compress_struct". (It also has +a bunch of subsidiary structures which are allocated via malloc(), but the +application doesn't control those directly.) This struct can be just a local +variable in the calling routine, if a single routine is going to execute the +whole JPEG compression sequence. Otherwise it can be static or allocated +from malloc(). + +You will also need a structure representing a JPEG error handler. The part +of this that the library cares about is a "struct jpeg_error_mgr". If you +are providing your own error handler, you'll typically want to embed the +jpeg_error_mgr struct in a larger structure; this is discussed later under +"Error handling". For now we'll assume you are just using the default error +handler. The default error handler will print JPEG error/warning messages +on stderr, and it will call exit() if a fatal error occurs. + +You must initialize the error handler structure, store a pointer to it into +the JPEG object's "err" field, and then call jpeg_create_compress() to +initialize the rest of the JPEG object. + +Typical code for this step, if you are using the default error handler, is + + struct jpeg_compress_struct cinfo; + struct jpeg_error_mgr jerr; + ... + cinfo.err = jpeg_std_error(&jerr); + jpeg_create_compress(&cinfo); + +jpeg_create_compress allocates a small amount of memory, so it could fail +if you are out of memory. In that case it will exit via the error handler; +that's why the error handler must be initialized first. + + +2. Specify the destination for the compressed data (eg, a file). + +As previously mentioned, the JPEG library delivers compressed data to a +"data destination" module. The library includes one data destination +module which knows how to write to a stdio stream. You can use your own +destination module if you want to do something else, as discussed later. + +If you use the standard destination module, you must open the target stdio +stream beforehand. Typical code for this step looks like: + + FILE * outfile; + ... + if ((outfile = fopen(filename, "wb")) == NULL) { + fprintf(stderr, "can't open %s\n", filename); + exit(1); + } + jpeg_stdio_dest(&cinfo, outfile); + +where the last line invokes the standard destination module. + +WARNING: it is critical that the binary compressed data be delivered to the +output file unchanged. On non-Unix systems the stdio library may perform +newline translation or otherwise corrupt binary data. To suppress this +behavior, you may need to use a "b" option to fopen (as shown above), or use +setmode() or another routine to put the stdio stream in binary mode. See +cjpeg.c and djpeg.c for code that has been found to work on many systems. + +You can select the data destination after setting other parameters (step 3), +if that's more convenient. You may not change the destination between +calling jpeg_start_compress() and jpeg_finish_compress(). + + +3. Set parameters for compression, including image size & colorspace. + +You must supply information about the source image by setting the following +fields in the JPEG object (cinfo structure): + + image_width Width of image, in pixels + image_height Height of image, in pixels + input_components Number of color channels (samples per pixel) + in_color_space Color space of source image + +The image dimensions are, hopefully, obvious. JPEG supports image dimensions +of 1 to 64K pixels in either direction. The input color space is typically +RGB or grayscale, and input_components is 3 or 1 accordingly. (See "Special +color spaces", later, for more info.) The in_color_space field must be +assigned one of the J_COLOR_SPACE enum constants, typically JCS_RGB or +JCS_GRAYSCALE. + +JPEG has a large number of compression parameters that determine how the +image is encoded. Most applications don't need or want to know about all +these parameters. You can set all the parameters to reasonable defaults by +calling jpeg_set_defaults(); then, if there are particular values you want +to change, you can do so after that. The "Compression parameter selection" +section tells about all the parameters. + +You must set in_color_space correctly before calling jpeg_set_defaults(), +because the defaults depend on the source image colorspace. However the +other three source image parameters need not be valid until you call +jpeg_start_compress(). There's no harm in calling jpeg_set_defaults() more +than once, if that happens to be convenient. + +Typical code for a 24-bit RGB source image is + + cinfo.image_width = Width; /* image width and height, in pixels */ + cinfo.image_height = Height; + cinfo.input_components = 3; /* # of color components per pixel */ + cinfo.in_color_space = JCS_RGB; /* colorspace of input image */ + + jpeg_set_defaults(&cinfo); + /* Make optional parameter settings here */ + + +4. jpeg_start_compress(...); + +After you have established the data destination and set all the necessary +source image info and other parameters, call jpeg_start_compress() to begin +a compression cycle. This will initialize internal state, allocate working +storage, and emit the first few bytes of the JPEG datastream header. + +Typical code: + + jpeg_start_compress(&cinfo, TRUE); + +The "TRUE" parameter ensures that a complete JPEG interchange datastream +will be written. This is appropriate in most cases. If you think you might +want to use an abbreviated datastream, read the section on abbreviated +datastreams, below. + +Once you have called jpeg_start_compress(), you may not alter any JPEG +parameters or other fields of the JPEG object until you have completed +the compression cycle. + + +5. while (scan lines remain to be written) + jpeg_write_scanlines(...); + +Now write all the required image data by calling jpeg_write_scanlines() +one or more times. You can pass one or more scanlines in each call, up +to the total image height. In most applications it is convenient to pass +just one or a few scanlines at a time. The expected format for the passed +data is discussed under "Data formats", above. + +Image data should be written in top-to-bottom scanline order. The JPEG spec +contains some weasel wording about how top and bottom are application-defined +terms (a curious interpretation of the English language...) but if you want +your files to be compatible with everyone else's, you WILL use top-to-bottom +order. If the source data must be read in bottom-to-top order, you can use +the JPEG library's virtual array mechanism to invert the data efficiently. +Examples of this can be found in the sample application cjpeg. + +The library maintains a count of the number of scanlines written so far +in the next_scanline field of the JPEG object. Usually you can just use +this variable as the loop counter, so that the loop test looks like +"while (cinfo.next_scanline < cinfo.image_height)". + +Code for this step depends heavily on the way that you store the source data. +example.c shows the following code for the case of a full-size 2-D source +array containing 3-byte RGB pixels: + + JSAMPROW row_pointer[1]; /* pointer to a single row */ + int row_stride; /* physical row width in buffer */ + + row_stride = image_width * 3; /* JSAMPLEs per row in image_buffer */ + + while (cinfo.next_scanline < cinfo.image_height) { + row_pointer[0] = & image_buffer[cinfo.next_scanline * row_stride]; + jpeg_write_scanlines(&cinfo, row_pointer, 1); + } + +jpeg_write_scanlines() returns the number of scanlines actually written. +This will normally be equal to the number passed in, so you can usually +ignore the return value. It is different in just two cases: + * If you try to write more scanlines than the declared image height, + the additional scanlines are ignored. + * If you use a suspending data destination manager, output buffer overrun + will cause the compressor to return before accepting all the passed lines. + This feature is discussed under "I/O suspension", below. The normal + stdio destination manager will NOT cause this to happen. +In any case, the return value is the same as the change in the value of +next_scanline. + + +6. jpeg_finish_compress(...); + +After all the image data has been written, call jpeg_finish_compress() to +complete the compression cycle. This step is ESSENTIAL to ensure that the +last bufferload of data is written to the data destination. +jpeg_finish_compress() also releases working memory associated with the JPEG +object. + +Typical code: + + jpeg_finish_compress(&cinfo); + +If using the stdio destination manager, don't forget to close the output +stdio stream (if necessary) afterwards. + +If you have requested a multi-pass operating mode, such as Huffman code +optimization, jpeg_finish_compress() will perform the additional passes using +data buffered by the first pass. In this case jpeg_finish_compress() may take +quite a while to complete. With the default compression parameters, this will +not happen. + +It is an error to call jpeg_finish_compress() before writing the necessary +total number of scanlines. If you wish to abort compression, call +jpeg_abort() as discussed below. + +After completing a compression cycle, you may dispose of the JPEG object +as discussed next, or you may use it to compress another image. In that case +return to step 2, 3, or 4 as appropriate. If you do not change the +destination manager, the new datastream will be written to the same target. +If you do not change any JPEG parameters, the new datastream will be written +with the same parameters as before. Note that you can change the input image +dimensions freely between cycles, but if you change the input colorspace, you +should call jpeg_set_defaults() to adjust for the new colorspace; and then +you'll need to repeat all of step 3. + + +7. Release the JPEG compression object. + +When you are done with a JPEG compression object, destroy it by calling +jpeg_destroy_compress(). This will free all subsidiary memory (regardless of +the previous state of the object). Or you can call jpeg_destroy(), which +works for either compression or decompression objects --- this may be more +convenient if you are sharing code between compression and decompression +cases. (Actually, these routines are equivalent except for the declared type +of the passed pointer. To avoid gripes from ANSI C compilers, jpeg_destroy() +should be passed a j_common_ptr.) + +If you allocated the jpeg_compress_struct structure from malloc(), freeing +it is your responsibility --- jpeg_destroy() won't. Ditto for the error +handler structure. + +Typical code: + + jpeg_destroy_compress(&cinfo); + + +8. Aborting. + +If you decide to abort a compression cycle before finishing, you can clean up +in either of two ways: + +* If you don't need the JPEG object any more, just call + jpeg_destroy_compress() or jpeg_destroy() to release memory. This is + legitimate at any point after calling jpeg_create_compress() --- in fact, + it's safe even if jpeg_create_compress() fails. + +* If you want to re-use the JPEG object, call jpeg_abort_compress(), or call + jpeg_abort() which works on both compression and decompression objects. + This will return the object to an idle state, releasing any working memory. + jpeg_abort() is allowed at any time after successful object creation. + +Note that cleaning up the data destination, if required, is your +responsibility; neither of these routines will call term_destination(). +(See "Compressed data handling", below, for more about that.) + +jpeg_destroy() and jpeg_abort() are the only safe calls to make on a JPEG +object that has reported an error by calling error_exit (see "Error handling" +for more info). The internal state of such an object is likely to be out of +whack. Either of these two routines will return the object to a known state. + + +Decompression details +--------------------- + +Here we revisit the JPEG decompression outline given in the overview. + +1. Allocate and initialize a JPEG decompression object. + +This is just like initialization for compression, as discussed above, +except that the object is a "struct jpeg_decompress_struct" and you +call jpeg_create_decompress(). Error handling is exactly the same. + +Typical code: + + struct jpeg_decompress_struct cinfo; + struct jpeg_error_mgr jerr; + ... + cinfo.err = jpeg_std_error(&jerr); + jpeg_create_decompress(&cinfo); + +(Both here and in the IJG code, we usually use variable name "cinfo" for +both compression and decompression objects.) + + +2. Specify the source of the compressed data (eg, a file). + +As previously mentioned, the JPEG library reads compressed data from a "data +source" module. The library includes one data source module which knows how +to read from a stdio stream. You can use your own source module if you want +to do something else, as discussed later. + +If you use the standard source module, you must open the source stdio stream +beforehand. Typical code for this step looks like: + + FILE * infile; + ... + if ((infile = fopen(filename, "rb")) == NULL) { + fprintf(stderr, "can't open %s\n", filename); + exit(1); + } + jpeg_stdio_src(&cinfo, infile); + +where the last line invokes the standard source module. + +WARNING: it is critical that the binary compressed data be read unchanged. +On non-Unix systems the stdio library may perform newline translation or +otherwise corrupt binary data. To suppress this behavior, you may need to use +a "b" option to fopen (as shown above), or use setmode() or another routine to +put the stdio stream in binary mode. See cjpeg.c and djpeg.c for code that +has been found to work on many systems. + +You may not change the data source between calling jpeg_read_header() and +jpeg_finish_decompress(). If you wish to read a series of JPEG images from +a single source file, you should repeat the jpeg_read_header() to +jpeg_finish_decompress() sequence without reinitializing either the JPEG +object or the data source module; this prevents buffered input data from +being discarded. + + +3. Call jpeg_read_header() to obtain image info. + +Typical code for this step is just + + jpeg_read_header(&cinfo, TRUE); + +This will read the source datastream header markers, up to the beginning +of the compressed data proper. On return, the image dimensions and other +info have been stored in the JPEG object. The application may wish to +consult this information before selecting decompression parameters. + +More complex code is necessary if + * A suspending data source is used --- in that case jpeg_read_header() + may return before it has read all the header data. See "I/O suspension", + below. The normal stdio source manager will NOT cause this to happen. + * Abbreviated JPEG files are to be processed --- see the section on + abbreviated datastreams. Standard applications that deal only in + interchange JPEG files need not be concerned with this case either. + +It is permissible to stop at this point if you just wanted to find out the +image dimensions and other header info for a JPEG file. In that case, +call jpeg_destroy() when you are done with the JPEG object, or call +jpeg_abort() to return it to an idle state before selecting a new data +source and reading another header. + + +4. Set parameters for decompression. + +jpeg_read_header() sets appropriate default decompression parameters based on +the properties of the image (in particular, its colorspace). However, you +may well want to alter these defaults before beginning the decompression. +For example, the default is to produce full color output from a color file. +If you want colormapped output you must ask for it. Other options allow the +returned image to be scaled and allow various speed/quality tradeoffs to be +selected. "Decompression parameter selection", below, gives details. + +If the defaults are appropriate, nothing need be done at this step. + +Note that all default values are set by each call to jpeg_read_header(). +If you reuse a decompression object, you cannot expect your parameter +settings to be preserved across cycles, as you can for compression. +You must set desired parameter values each time. + + +5. jpeg_start_decompress(...); + +Once the parameter values are satisfactory, call jpeg_start_decompress() to +begin decompression. This will initialize internal state, allocate working +memory, and prepare for returning data. + +Typical code is just + + jpeg_start_decompress(&cinfo); + +If you have requested a multi-pass operating mode, such as 2-pass color +quantization, jpeg_start_decompress() will do everything needed before data +output can begin. In this case jpeg_start_decompress() may take quite a while +to complete. With a single-scan (non progressive) JPEG file and default +decompression parameters, this will not happen; jpeg_start_decompress() will +return quickly. + +After this call, the final output image dimensions, including any requested +scaling, are available in the JPEG object; so is the selected colormap, if +colormapped output has been requested. Useful fields include + + output_width image width and height, as scaled + output_height + out_color_components # of color components in out_color_space + output_components # of color components returned per pixel + colormap the selected colormap, if any + actual_number_of_colors number of entries in colormap + +output_components is 1 (a colormap index) when quantizing colors; otherwise it +equals out_color_components. It is the number of JSAMPLE values that will be +emitted per pixel in the output arrays. + +Typically you will need to allocate data buffers to hold the incoming image. +You will need output_width * output_components JSAMPLEs per scanline in your +output buffer, and a total of output_height scanlines will be returned. + +Note: if you are using the JPEG library's internal memory manager to allocate +data buffers (as djpeg does), then the manager's protocol requires that you +request large buffers *before* calling jpeg_start_decompress(). This is a +little tricky since the output_XXX fields are not normally valid then. You +can make them valid by calling jpeg_calc_output_dimensions() after setting the +relevant parameters (scaling, output color space, and quantization flag). + + +6. while (scan lines remain to be read) + jpeg_read_scanlines(...); + +Now you can read the decompressed image data by calling jpeg_read_scanlines() +one or more times. At each call, you pass in the maximum number of scanlines +to be read (ie, the height of your working buffer); jpeg_read_scanlines() +will return up to that many lines. The return value is the number of lines +actually read. The format of the returned data is discussed under "Data +formats", above. Don't forget that grayscale and color JPEGs will return +different data formats! + +Image data is returned in top-to-bottom scanline order. If you must write +out the image in bottom-to-top order, you can use the JPEG library's virtual +array mechanism to invert the data efficiently. Examples of this can be +found in the sample application djpeg. + +The library maintains a count of the number of scanlines returned so far +in the output_scanline field of the JPEG object. Usually you can just use +this variable as the loop counter, so that the loop test looks like +"while (cinfo.output_scanline < cinfo.output_height)". (Note that the test +should NOT be against image_height, unless you never use scaling. The +image_height field is the height of the original unscaled image.) +The return value always equals the change in the value of output_scanline. + +If you don't use a suspending data source, it is safe to assume that +jpeg_read_scanlines() reads at least one scanline per call, until the +bottom of the image has been reached. + +If you use a buffer larger than one scanline, it is NOT safe to assume that +jpeg_read_scanlines() fills it. (The current implementation returns only a +few scanlines per call, no matter how large a buffer you pass.) So you must +always provide a loop that calls jpeg_read_scanlines() repeatedly until the +whole image has been read. + + +7. jpeg_finish_decompress(...); + +After all the image data has been read, call jpeg_finish_decompress() to +complete the decompression cycle. This causes working memory associated +with the JPEG object to be released. + +Typical code: + + jpeg_finish_decompress(&cinfo); + +If using the stdio source manager, don't forget to close the source stdio +stream if necessary. + +It is an error to call jpeg_finish_decompress() before reading the correct +total number of scanlines. If you wish to abort decompression, call +jpeg_abort() as discussed below. + +After completing a decompression cycle, you may dispose of the JPEG object as +discussed next, or you may use it to decompress another image. In that case +return to step 2 or 3 as appropriate. If you do not change the source +manager, the next image will be read from the same source. + + +8. Release the JPEG decompression object. + +When you are done with a JPEG decompression object, destroy it by calling +jpeg_destroy_decompress() or jpeg_destroy(). The previous discussion of +destroying compression objects applies here too. + +Typical code: + + jpeg_destroy_decompress(&cinfo); + + +9. Aborting. + +You can abort a decompression cycle by calling jpeg_destroy_decompress() or +jpeg_destroy() if you don't need the JPEG object any more, or +jpeg_abort_decompress() or jpeg_abort() if you want to reuse the object. +The previous discussion of aborting compression cycles applies here too. + + +Mechanics of usage: include files, linking, etc +----------------------------------------------- + +Applications using the JPEG library should include the header file jpeglib.h +to obtain declarations of data types and routines. Before including +jpeglib.h, include system headers that define at least the typedefs FILE and +size_t. On ANSI-conforming systems, including is sufficient; on +older Unix systems, you may need to define size_t. + +If the application needs to refer to individual JPEG library error codes, also +include jerror.h to define those symbols. + +jpeglib.h indirectly includes the files jconfig.h and jmorecfg.h. If you are +installing the JPEG header files in a system directory, you will want to +install all four files: jpeglib.h, jerror.h, jconfig.h, jmorecfg.h. + +The most convenient way to include the JPEG code into your executable program +is to prepare a library file ("libjpeg.a", or a corresponding name on non-Unix +machines) and reference it at your link step. If you use only half of the +library (only compression or only decompression), only that much code will be +included from the library, unless your linker is hopelessly brain-damaged. +The supplied makefiles build libjpeg.a automatically (see install.txt). + +While you can build the JPEG library as a shared library if the whim strikes +you, we don't really recommend it. The trouble with shared libraries is that +at some point you'll probably try to substitute a new version of the library +without recompiling the calling applications. That generally doesn't work +because the parameter struct declarations usually change with each new +version. In other words, the library's API is *not* guaranteed binary +compatible across versions; we only try to ensure source-code compatibility. +(In hindsight, it might have been smarter to hide the parameter structs from +applications and introduce a ton of access functions instead. Too late now, +however.) + +On some systems your application may need to set up a signal handler to ensure +that temporary files are deleted if the program is interrupted. This is most +critical if you are on MS-DOS and use the jmemdos.c memory manager back end; +it will try to grab extended memory for temp files, and that space will NOT be +freed automatically. See cjpeg.c or djpeg.c for an example signal handler. + +It may be worth pointing out that the core JPEG library does not actually +require the stdio library: only the default source/destination managers and +error handler need it. You can use the library in a stdio-less environment +if you replace those modules and use jmemnobs.c (or another memory manager of +your own devising). More info about the minimum system library requirements +may be found in jinclude.h. + + +ADVANCED FEATURES +================= + +Compression parameter selection +------------------------------- + +This section describes all the optional parameters you can set for JPEG +compression, as well as the "helper" routines provided to assist in this +task. Proper setting of some parameters requires detailed understanding +of the JPEG standard; if you don't know what a parameter is for, it's best +not to mess with it! See REFERENCES in the README file for pointers to +more info about JPEG. + +It's a good idea to call jpeg_set_defaults() first, even if you plan to set +all the parameters; that way your code is more likely to work with future JPEG +libraries that have additional parameters. For the same reason, we recommend +you use a helper routine where one is provided, in preference to twiddling +cinfo fields directly. + +The helper routines are: + +jpeg_set_defaults (j_compress_ptr cinfo) + This routine sets all JPEG parameters to reasonable defaults, using + only the input image's color space (field in_color_space, which must + already be set in cinfo). Many applications will only need to use + this routine and perhaps jpeg_set_quality(). + +jpeg_set_colorspace (j_compress_ptr cinfo, J_COLOR_SPACE colorspace) + Sets the JPEG file's colorspace (field jpeg_color_space) as specified, + and sets other color-space-dependent parameters appropriately. See + "Special color spaces", below, before using this. A large number of + parameters, including all per-component parameters, are set by this + routine; if you want to twiddle individual parameters you should call + jpeg_set_colorspace() before rather than after. + +jpeg_default_colorspace (j_compress_ptr cinfo) + Selects an appropriate JPEG colorspace based on cinfo->in_color_space, + and calls jpeg_set_colorspace(). This is actually a subroutine of + jpeg_set_defaults(). It's broken out in case you want to change + just the colorspace-dependent JPEG parameters. + +jpeg_set_quality (j_compress_ptr cinfo, int quality, boolean force_baseline) + Constructs JPEG quantization tables appropriate for the indicated + quality setting. The quality value is expressed on the 0..100 scale + recommended by IJG (cjpeg's "-quality" switch uses this routine). + Note that the exact mapping from quality values to tables may change + in future IJG releases as more is learned about DCT quantization. + If the force_baseline parameter is TRUE, then the quantization table + entries are constrained to the range 1..255 for full JPEG baseline + compatibility. In the current implementation, this only makes a + difference for quality settings below 25, and it effectively prevents + very small/low quality files from being generated. The IJG decoder + is capable of reading the non-baseline files generated at low quality + settings when force_baseline is FALSE, but other decoders may not be. + +jpeg_set_linear_quality (j_compress_ptr cinfo, int scale_factor, + boolean force_baseline) + Same as jpeg_set_quality() except that the generated tables are the + sample tables given in the JPEC spec section K.1, multiplied by the + specified scale factor (which is expressed as a percentage; thus + scale_factor = 100 reproduces the spec's tables). Note that larger + scale factors give lower quality. This entry point is useful for + conforming to the Adobe PostScript DCT conventions, but we do not + recommend linear scaling as a user-visible quality scale otherwise. + force_baseline again constrains the computed table entries to 1..255. + +int jpeg_quality_scaling (int quality) + Converts a value on the IJG-recommended quality scale to a linear + scaling percentage. Note that this routine may change or go away + in future releases --- IJG may choose to adopt a scaling method that + can't be expressed as a simple scalar multiplier, in which case the + premise of this routine collapses. Caveat user. + +jpeg_default_qtables (j_compress_ptr cinfo, boolean force_baseline) + Set default quantization tables with linear q_scale_factor[] values + (see below). + +jpeg_add_quant_table (j_compress_ptr cinfo, int which_tbl, + const unsigned int *basic_table, + int scale_factor, boolean force_baseline) + Allows an arbitrary quantization table to be created. which_tbl + indicates which table slot to fill. basic_table points to an array + of 64 unsigned ints given in normal array order. These values are + multiplied by scale_factor/100 and then clamped to the range 1..65535 + (or to 1..255 if force_baseline is TRUE). + CAUTION: prior to library version 6a, jpeg_add_quant_table expected + the basic table to be given in JPEG zigzag order. If you need to + write code that works with either older or newer versions of this + routine, you must check the library version number. Something like + "#if JPEG_LIB_VERSION >= 61" is the right test. + +jpeg_simple_progression (j_compress_ptr cinfo) + Generates a default scan script for writing a progressive-JPEG file. + This is the recommended method of creating a progressive file, + unless you want to make a custom scan sequence. You must ensure that + the JPEG color space is set correctly before calling this routine. + + +Compression parameters (cinfo fields) include: + +boolean arith_code + If TRUE, use arithmetic coding. + If FALSE, use Huffman coding. + +int block_size + Set DCT block size. All N from 1 to 16 are possible. + Default is 8 (baseline format). + Larger values produce higher compression, + smaller values produce higher quality. + An exact DCT stage is possible with 1 or 2. + With the default quality of 75 and default Luminance qtable + the DCT+Quantization stage is lossless for value 1. + Note that values other than 8 require a SmartScale capable decoder, + introduced with IJG JPEG 8. Setting the block_size parameter for + compression works with version 8c and later. + +J_DCT_METHOD dct_method + Selects the algorithm used for the DCT step. Choices are: + JDCT_ISLOW: slow but accurate integer algorithm + JDCT_IFAST: faster, less accurate integer method + JDCT_FLOAT: floating-point method + JDCT_DEFAULT: default method (normally JDCT_ISLOW) + JDCT_FASTEST: fastest method (normally JDCT_IFAST) + The FLOAT method is very slightly more accurate than the ISLOW method, + but may give different results on different machines due to varying + roundoff behavior. The integer methods should give the same results + on all machines. On machines with sufficiently fast FP hardware, the + floating-point method may also be the fastest. The IFAST method is + considerably less accurate than the other two; its use is not + recommended if high quality is a concern. JDCT_DEFAULT and + JDCT_FASTEST are macros configurable by each installation. + +unsigned int scale_num, scale_denom + Scale the image by the fraction scale_num/scale_denom. Default is + 1/1, or no scaling. Currently, the supported scaling ratios are + M/N with all N from 1 to 16, where M is the destination DCT size, + which is 8 by default (see block_size parameter above). + (The library design allows for arbitrary scaling ratios but this + is not likely to be implemented any time soon.) + +J_COLOR_SPACE jpeg_color_space +int num_components + The JPEG color space and corresponding number of components; see + "Special color spaces", below, for more info. We recommend using + jpeg_set_colorspace() if you want to change these. + +J_COLOR_TRANSFORM color_transform + Internal color transform identifier, writes LSE marker if nonzero + (requires decoder with inverse color transform support, introduced + with IJG JPEG 9). + Two values are currently possible: JCT_NONE and JCT_SUBTRACT_GREEN. + Set this value for lossless RGB application *before* calling + jpeg_set_colorspace(), because entropy table assignment in + jpeg_set_colorspace() depends on color_transform. + +boolean optimize_coding + TRUE causes the compressor to compute optimal Huffman coding tables + for the image. This requires an extra pass over the data and + therefore costs a good deal of space and time. The default is + FALSE, which tells the compressor to use the supplied or default + Huffman tables. In most cases optimal tables save only a few percent + of file size compared to the default tables. Note that when this is + TRUE, you need not supply Huffman tables at all, and any you do + supply will be overwritten. + +unsigned int restart_interval +int restart_in_rows + To emit restart markers in the JPEG file, set one of these nonzero. + Set restart_interval to specify the exact interval in MCU blocks. + Set restart_in_rows to specify the interval in MCU rows. (If + restart_in_rows is not 0, then restart_interval is set after the + image width in MCUs is computed.) Defaults are zero (no restarts). + One restart marker per MCU row is often a good choice. + NOTE: the overhead of restart markers is higher in grayscale JPEG + files than in color files, and MUCH higher in progressive JPEGs. + If you use restarts, you may want to use larger intervals in those + cases. + +const jpeg_scan_info * scan_info +int num_scans + By default, scan_info is NULL; this causes the compressor to write a + single-scan sequential JPEG file. If not NULL, scan_info points to + an array of scan definition records of length num_scans. The + compressor will then write a JPEG file having one scan for each scan + definition record. This is used to generate noninterleaved or + progressive JPEG files. The library checks that the scan array + defines a valid JPEG scan sequence. (jpeg_simple_progression creates + a suitable scan definition array for progressive JPEG.) This is + discussed further under "Progressive JPEG support". + +boolean do_fancy_downsampling + If TRUE, use direct DCT scaling with DCT size > 8 for downsampling + of chroma components. + If FALSE, use only DCT size <= 8 and simple separate downsampling. + Default is TRUE. + For better image stability in multiple generation compression cycles + it is preferable that this value matches the corresponding + do_fancy_upsampling value in decompression. + +int smoothing_factor + If non-zero, the input image is smoothed; the value should be 1 for + minimal smoothing to 100 for maximum smoothing. Consult jcsample.c + for details of the smoothing algorithm. The default is zero. + +boolean write_JFIF_header + If TRUE, a JFIF APP0 marker is emitted. jpeg_set_defaults() and + jpeg_set_colorspace() set this TRUE if a JFIF-legal JPEG color space + (ie, YCbCr or grayscale) is selected, otherwise FALSE. + +UINT8 JFIF_major_version +UINT8 JFIF_minor_version + The version number to be written into the JFIF marker. + jpeg_set_defaults() initializes the version to 1.01 (major=minor=1). + You should set it to 1.02 (major=1, minor=2) if you plan to write + any JFIF 1.02 extension markers. + +UINT8 density_unit +UINT16 X_density +UINT16 Y_density + The resolution information to be written into the JFIF marker; + not used otherwise. density_unit may be 0 for unknown, + 1 for dots/inch, or 2 for dots/cm. The default values are 0,1,1 + indicating square pixels of unknown size. + +boolean write_Adobe_marker + If TRUE, an Adobe APP14 marker is emitted. jpeg_set_defaults() and + jpeg_set_colorspace() set this TRUE if JPEG color space RGB, CMYK, + or YCCK is selected, otherwise FALSE. It is generally a bad idea + to set both write_JFIF_header and write_Adobe_marker. In fact, + you probably shouldn't change the default settings at all --- the + default behavior ensures that the JPEG file's color space can be + recognized by the decoder. + +JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS] + Pointers to coefficient quantization tables, one per table slot, + or NULL if no table is defined for a slot. Usually these should + be set via one of the above helper routines; jpeg_add_quant_table() + is general enough to define any quantization table. The other + routines will set up table slot 0 for luminance quality and table + slot 1 for chrominance. + +int q_scale_factor[NUM_QUANT_TBLS] + Linear quantization scaling factors (percentage, initialized 100) + for use with jpeg_default_qtables(). + See rdswitch.c and cjpeg.c for an example of usage. + Note that the q_scale_factor[] fields are the "linear" scales, so you + have to convert from user-defined ratings via jpeg_quality_scaling(). + Here is an example code which corresponds to cjpeg -quality 90,70: + + jpeg_set_defaults(cinfo); + + /* Set luminance quality 90. */ + cinfo->q_scale_factor[0] = jpeg_quality_scaling(90); + /* Set chrominance quality 70. */ + cinfo->q_scale_factor[1] = jpeg_quality_scaling(70); + + jpeg_default_qtables(cinfo, force_baseline); + + CAUTION: You must also set 1x1 subsampling for efficient separate + color quality selection, since the default value used by library + is 2x2: + + cinfo->comp_info[0].v_samp_factor = 1; + cinfo->comp_info[0].h_samp_factor = 1; + +JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS] +JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS] + Pointers to Huffman coding tables, one per table slot, or NULL if + no table is defined for a slot. Slots 0 and 1 are filled with the + JPEG sample tables by jpeg_set_defaults(). If you need to allocate + more table structures, jpeg_alloc_huff_table() may be used. + Note that optimal Huffman tables can be computed for an image + by setting optimize_coding, as discussed above; there's seldom + any need to mess with providing your own Huffman tables. + + +The actual dimensions of the JPEG image that will be written to the file are +given by the following fields. These are computed from the input image +dimensions and the compression parameters by jpeg_start_compress(). You can +also call jpeg_calc_jpeg_dimensions() to obtain the values that will result +from the current parameter settings. This can be useful if you are trying +to pick a scaling ratio that will get close to a desired target size. + +JDIMENSION jpeg_width Actual dimensions of output image. +JDIMENSION jpeg_height + + +Per-component parameters are stored in the struct cinfo.comp_info[i] for +component number i. Note that components here refer to components of the +JPEG color space, *not* the source image color space. A suitably large +comp_info[] array is allocated by jpeg_set_defaults(); if you choose not +to use that routine, it's up to you to allocate the array. + +int component_id + The one-byte identifier code to be recorded in the JPEG file for + this component. For the standard color spaces, we recommend you + leave the default values alone. + +int h_samp_factor +int v_samp_factor + Horizontal and vertical sampling factors for the component; must + be 1..4 according to the JPEG standard. Note that larger sampling + factors indicate a higher-resolution component; many people find + this behavior quite unintuitive. The default values are 2,2 for + luminance components and 1,1 for chrominance components, except + for grayscale where 1,1 is used. + +int quant_tbl_no + Quantization table number for component. The default value is + 0 for luminance components and 1 for chrominance components. + +int dc_tbl_no +int ac_tbl_no + DC and AC entropy coding table numbers. The default values are + 0 for luminance components and 1 for chrominance components. + +int component_index + Must equal the component's index in comp_info[]. (Beginning in + release v6, the compressor library will fill this in automatically; + you don't have to.) + + +Decompression parameter selection +--------------------------------- + +Decompression parameter selection is somewhat simpler than compression +parameter selection, since all of the JPEG internal parameters are +recorded in the source file and need not be supplied by the application. +(Unless you are working with abbreviated files, in which case see +"Abbreviated datastreams", below.) Decompression parameters control +the postprocessing done on the image to deliver it in a format suitable +for the application's use. Many of the parameters control speed/quality +tradeoffs, in which faster decompression may be obtained at the price of +a poorer-quality image. The defaults select the highest quality (slowest) +processing. + +The following fields in the JPEG object are set by jpeg_read_header() and +may be useful to the application in choosing decompression parameters: + +JDIMENSION image_width Width and height of image +JDIMENSION image_height +int num_components Number of color components +J_COLOR_SPACE jpeg_color_space Colorspace of image +boolean saw_JFIF_marker TRUE if a JFIF APP0 marker was seen + UINT8 JFIF_major_version Version information from JFIF marker + UINT8 JFIF_minor_version + UINT8 density_unit Resolution data from JFIF marker + UINT16 X_density + UINT16 Y_density +boolean saw_Adobe_marker TRUE if an Adobe APP14 marker was seen + UINT8 Adobe_transform Color transform code from Adobe marker + +The JPEG color space, unfortunately, is something of a guess since the JPEG +standard proper does not provide a way to record it. In practice most files +adhere to the JFIF or Adobe conventions, and the decoder will recognize these +correctly. See "Special color spaces", below, for more info. + + +The decompression parameters that determine the basic properties of the +returned image are: + +J_COLOR_SPACE out_color_space + Output color space. jpeg_read_header() sets an appropriate default + based on jpeg_color_space; typically it will be RGB or grayscale. + The application can change this field to request output in a different + colorspace. For example, set it to JCS_GRAYSCALE to get grayscale + output from a color file. (This is useful for previewing: grayscale + output is faster than full color since the color components need not + be processed.) Note that not all possible color space transforms are + currently implemented; you may need to extend jdcolor.c if you want an + unusual conversion. + +unsigned int scale_num, scale_denom + Scale the image by the fraction scale_num/scale_denom. Currently, + the supported scaling ratios are M/N with all M from 1 to 16, where + N is the source DCT size, which is 8 for baseline JPEG. (The library + design allows for arbitrary scaling ratios but this is not likely + to be implemented any time soon.) The values are initialized by + jpeg_read_header() with the source DCT size. For baseline JPEG + this is 8/8. If you change only the scale_num value while leaving + the other unchanged, then this specifies the DCT scaled size to be + applied on the given input. For baseline JPEG this is equivalent + to M/8 scaling, since the source DCT size for baseline JPEG is 8. + Smaller scaling ratios permit significantly faster decoding since + fewer pixels need be processed and a simpler IDCT method can be used. + +boolean quantize_colors + If set TRUE, colormapped output will be delivered. Default is FALSE, + meaning that full-color output will be delivered. + +The next three parameters are relevant only if quantize_colors is TRUE. + +int desired_number_of_colors + Maximum number of colors to use in generating a library-supplied color + map (the actual number of colors is returned in a different field). + Default 256. Ignored when the application supplies its own color map. + +boolean two_pass_quantize + If TRUE, an extra pass over the image is made to select a custom color + map for the image. This usually looks a lot better than the one-size- + fits-all colormap that is used otherwise. Default is TRUE. Ignored + when the application supplies its own color map. + +J_DITHER_MODE dither_mode + Selects color dithering method. Supported values are: + JDITHER_NONE no dithering: fast, very low quality + JDITHER_ORDERED ordered dither: moderate speed and quality + JDITHER_FS Floyd-Steinberg dither: slow, high quality + Default is JDITHER_FS. (At present, ordered dither is implemented + only in the single-pass, standard-colormap case. If you ask for + ordered dither when two_pass_quantize is TRUE or when you supply + an external color map, you'll get F-S dithering.) + +When quantize_colors is TRUE, the target color map is described by the next +two fields. colormap is set to NULL by jpeg_read_header(). The application +can supply a color map by setting colormap non-NULL and setting +actual_number_of_colors to the map size. Otherwise, jpeg_start_decompress() +selects a suitable color map and sets these two fields itself. +[Implementation restriction: at present, an externally supplied colormap is +only accepted for 3-component output color spaces.] + +JSAMPARRAY colormap + The color map, represented as a 2-D pixel array of out_color_components + rows and actual_number_of_colors columns. Ignored if not quantizing. + CAUTION: if the JPEG library creates its own colormap, the storage + pointed to by this field is released by jpeg_finish_decompress(). + Copy the colormap somewhere else first, if you want to save it. + +int actual_number_of_colors + The number of colors in the color map. + +Additional decompression parameters that the application may set include: + +J_DCT_METHOD dct_method + Selects the algorithm used for the DCT step. Choices are the same + as described above for compression. + +boolean do_fancy_upsampling + If TRUE, use direct DCT scaling with DCT size > 8 for upsampling + of chroma components. + If FALSE, use only DCT size <= 8 and simple separate upsampling. + Default is TRUE. + For better image stability in multiple generation compression cycles + it is preferable that this value matches the corresponding + do_fancy_downsampling value in compression. + +boolean do_block_smoothing + If TRUE, interblock smoothing is applied in early stages of decoding + progressive JPEG files; if FALSE, not. Default is TRUE. Early + progression stages look "fuzzy" with smoothing, "blocky" without. + In any case, block smoothing ceases to be applied after the first few + AC coefficients are known to full accuracy, so it is relevant only + when using buffered-image mode for progressive images. + +boolean enable_1pass_quant +boolean enable_external_quant +boolean enable_2pass_quant + These are significant only in buffered-image mode, which is + described in its own section below. + + +The output image dimensions are given by the following fields. These are +computed from the source image dimensions and the decompression parameters +by jpeg_start_decompress(). You can also call jpeg_calc_output_dimensions() +to obtain the values that will result from the current parameter settings. +This can be useful if you are trying to pick a scaling ratio that will get +close to a desired target size. It's also important if you are using the +JPEG library's memory manager to allocate output buffer space, because you +are supposed to request such buffers *before* jpeg_start_decompress(). + +JDIMENSION output_width Actual dimensions of output image. +JDIMENSION output_height +int out_color_components Number of color components in out_color_space. +int output_components Number of color components returned. +int rec_outbuf_height Recommended height of scanline buffer. + +When quantizing colors, output_components is 1, indicating a single color map +index per pixel. Otherwise it equals out_color_components. The output arrays +are required to be output_width * output_components JSAMPLEs wide. + +rec_outbuf_height is the recommended minimum height (in scanlines) of the +buffer passed to jpeg_read_scanlines(). If the buffer is smaller, the +library will still work, but time will be wasted due to unnecessary data +copying. In high-quality modes, rec_outbuf_height is always 1, but some +faster, lower-quality modes set it to larger values (typically 2 to 4). +If you are going to ask for a high-speed processing mode, you may as well +go to the trouble of honoring rec_outbuf_height so as to avoid data copying. +(An output buffer larger than rec_outbuf_height lines is OK, but won't +provide any material speed improvement over that height.) + + +Special color spaces +-------------------- + +The JPEG standard itself is "color blind" and doesn't specify any particular +color space. It is customary to convert color data to a luminance/chrominance +color space before compressing, since this permits greater compression. The +existing JPEG file interchange format standards specify YCbCr or GRAYSCALE +data (JFIF version 1), GRAYSCALE, RGB, YCbCr, CMYK, or YCCK (Adobe), or BG_RGB +or BG_YCC (big gamut color spaces, JFIF version 2). For special applications +such as multispectral images, other color spaces can be used, +but it must be understood that such files will be unportable. + +The JPEG library can handle the most common colorspace conversions (namely +RGB <=> YCbCr and CMYK <=> YCCK). It can also deal with data of an unknown +color space, passing it through without conversion. If you deal extensively +with an unusual color space, you can easily extend the library to understand +additional color spaces and perform appropriate conversions. + +For compression, the source data's color space is specified by field +in_color_space. This is transformed to the JPEG file's color space given +by jpeg_color_space. jpeg_set_defaults() chooses a reasonable JPEG color +space depending on in_color_space, but you can override this by calling +jpeg_set_colorspace(). Of course you must select a supported transformation. +jccolor.c currently supports the following transformations: + RGB => YCbCr + RGB => GRAYSCALE + RGB => BG_YCC + YCbCr => GRAYSCALE + YCbCr => BG_YCC + CMYK => YCCK +plus the null transforms: GRAYSCALE => GRAYSCALE, RGB => RGB, +BG_RGB => BG_RGB, YCbCr => YCbCr, BG_YCC => BG_YCC, CMYK => CMYK, +YCCK => YCCK, and UNKNOWN => UNKNOWN. + +The file interchange format standards (JFIF and Adobe) specify APPn markers +that indicate the color space of the JPEG file. It is important to ensure +that these are written correctly, or omitted if the JPEG file's color space +is not one of the ones supported by the interchange standards. +jpeg_set_colorspace() will set the compression parameters to include or omit +the APPn markers properly, so long as it is told the truth about the JPEG +color space. For example, if you are writing some random 3-component color +space without conversion, don't try to fake out the library by setting +in_color_space and jpeg_color_space to JCS_YCbCr; use JCS_UNKNOWN. +You may want to write an APPn marker of your own devising to identify +the colorspace --- see "Special markers", below. + +When told that the color space is UNKNOWN, the library will default to using +luminance-quality compression parameters for all color components. You may +well want to change these parameters. See the source code for +jpeg_set_colorspace(), in jcparam.c, for details. + +For decompression, the JPEG file's color space is given in jpeg_color_space, +and this is transformed to the output color space out_color_space. +jpeg_read_header's setting of jpeg_color_space can be relied on if the file +conforms to JFIF or Adobe conventions, but otherwise it is no better than a +guess. If you know the JPEG file's color space for certain, you can override +jpeg_read_header's guess by setting jpeg_color_space. jpeg_read_header also +selects a default output color space based on (its guess of) jpeg_color_space; +set out_color_space to override this. Again, you must select a supported +transformation. jdcolor.c currently supports + YCbCr => RGB + YCbCr => GRAYSCALE + BG_YCC => RGB + BG_YCC => GRAYSCALE + RGB => GRAYSCALE + GRAYSCALE => RGB + YCCK => CMYK +as well as the null transforms. (Since GRAYSCALE=>RGB is provided, an +application can force grayscale JPEGs to look like color JPEGs if it only +wants to handle one case.) + +The two-pass color quantizer, jquant2.c, is specialized to handle RGB data +(it weights distances appropriately for RGB colors). You'll need to modify +the code if you want to use it for non-RGB output color spaces. Note that +jquant2.c is used to map to an application-supplied colormap as well as for +the normal two-pass colormap selection process. + +CAUTION: it appears that Adobe Photoshop writes inverted data in CMYK JPEG +files: 0 represents 100% ink coverage, rather than 0% ink as you'd expect. +This is arguably a bug in Photoshop, but if you need to work with Photoshop +CMYK files, you will have to deal with it in your application. We cannot +"fix" this in the library by inverting the data during the CMYK<=>YCCK +transform, because that would break other applications, notably Ghostscript. +Photoshop versions prior to 3.0 write EPS files containing JPEG-encoded CMYK +data in the same inverted-YCCK representation used in bare JPEG files, but +the surrounding PostScript code performs an inversion using the PS image +operator. I am told that Photoshop 3.0 will write uninverted YCCK in +EPS/JPEG files, and will omit the PS-level inversion. (But the data +polarity used in bare JPEG files will not change in 3.0.) In either case, +the JPEG library must not invert the data itself, or else Ghostscript would +read these EPS files incorrectly. + + +Error handling +-------------- + +When the default error handler is used, any error detected inside the JPEG +routines will cause a message to be printed on stderr, followed by exit(). +You can supply your own error handling routines to override this behavior +and to control the treatment of nonfatal warnings and trace/debug messages. +The file example.c illustrates the most common case, which is to have the +application regain control after an error rather than exiting. + +The JPEG library never writes any message directly; it always goes through +the error handling routines. Three classes of messages are recognized: + * Fatal errors: the library cannot continue. + * Warnings: the library can continue, but the data is corrupt, and a + damaged output image is likely to result. + * Trace/informational messages. These come with a trace level indicating + the importance of the message; you can control the verbosity of the + program by adjusting the maximum trace level that will be displayed. + +You may, if you wish, simply replace the entire JPEG error handling module +(jerror.c) with your own code. However, you can avoid code duplication by +only replacing some of the routines depending on the behavior you need. +This is accomplished by calling jpeg_std_error() as usual, but then overriding +some of the method pointers in the jpeg_error_mgr struct, as illustrated by +example.c. + +All of the error handling routines will receive a pointer to the JPEG object +(a j_common_ptr which points to either a jpeg_compress_struct or a +jpeg_decompress_struct; if you need to tell which, test the is_decompressor +field). This struct includes a pointer to the error manager struct in its +"err" field. Frequently, custom error handler routines will need to access +additional data which is not known to the JPEG library or the standard error +handler. The most convenient way to do this is to embed either the JPEG +object or the jpeg_error_mgr struct in a larger structure that contains +additional fields; then casting the passed pointer provides access to the +additional fields. Again, see example.c for one way to do it. (Beginning +with IJG version 6b, there is also a void pointer "client_data" in each +JPEG object, which the application can also use to find related data. +The library does not touch client_data at all.) + +The individual methods that you might wish to override are: + +error_exit (j_common_ptr cinfo) + Receives control for a fatal error. Information sufficient to + generate the error message has been stored in cinfo->err; call + output_message to display it. Control must NOT return to the caller; + generally this routine will exit() or longjmp() somewhere. + Typically you would override this routine to get rid of the exit() + default behavior. Note that if you continue processing, you should + clean up the JPEG object with jpeg_abort() or jpeg_destroy(). + +output_message (j_common_ptr cinfo) + Actual output of any JPEG message. Override this to send messages + somewhere other than stderr. Note that this method does not know + how to generate a message, only where to send it. + +format_message (j_common_ptr cinfo, char * buffer) + Constructs a readable error message string based on the error info + stored in cinfo->err. This method is called by output_message. Few + applications should need to override this method. One possible + reason for doing so is to implement dynamic switching of error message + language. + +emit_message (j_common_ptr cinfo, int msg_level) + Decide whether or not to emit a warning or trace message; if so, + calls output_message. The main reason for overriding this method + would be to abort on warnings. msg_level is -1 for warnings, + 0 and up for trace messages. + +Only error_exit() and emit_message() are called from the rest of the JPEG +library; the other two are internal to the error handler. + +The actual message texts are stored in an array of strings which is pointed to +by the field err->jpeg_message_table. The messages are numbered from 0 to +err->last_jpeg_message, and it is these code numbers that are used in the +JPEG library code. You could replace the message texts (for instance, with +messages in French or German) by changing the message table pointer. See +jerror.h for the default texts. CAUTION: this table will almost certainly +change or grow from one library version to the next. + +It may be useful for an application to add its own message texts that are +handled by the same mechanism. The error handler supports a second "add-on" +message table for this purpose. To define an addon table, set the pointer +err->addon_message_table and the message numbers err->first_addon_message and +err->last_addon_message. If you number the addon messages beginning at 1000 +or so, you won't have to worry about conflicts with the library's built-in +messages. See the sample applications cjpeg/djpeg for an example of using +addon messages (the addon messages are defined in cderror.h). + +Actual invocation of the error handler is done via macros defined in jerror.h: + ERREXITn(...) for fatal errors + WARNMSn(...) for corrupt-data warnings + TRACEMSn(...) for trace and informational messages. +These macros store the message code and any additional parameters into the +error handler struct, then invoke the error_exit() or emit_message() method. +The variants of each macro are for varying numbers of additional parameters. +The additional parameters are inserted into the generated message using +standard printf() format codes. + +See jerror.h and jerror.c for further details. + + +Compressed data handling (source and destination managers) +---------------------------------------------------------- + +The JPEG compression library sends its compressed data to a "destination +manager" module. The default destination manager just writes the data to a +memory buffer or to a stdio stream, but you can provide your own manager to +do something else. Similarly, the decompression library calls a "source +manager" to obtain the compressed data; you can provide your own source +manager if you want the data to come from somewhere other than a memory +buffer or a stdio stream. + +In both cases, compressed data is processed a bufferload at a time: the +destination or source manager provides a work buffer, and the library invokes +the manager only when the buffer is filled or emptied. (You could define a +one-character buffer to force the manager to be invoked for each byte, but +that would be rather inefficient.) The buffer's size and location are +controlled by the manager, not by the library. For example, the memory +source manager just makes the buffer pointer and length point to the original +data in memory. In this case the buffer-reload procedure will be invoked +only if the decompressor ran off the end of the datastream, which would +indicate an erroneous datastream. + +The work buffer is defined as an array of datatype JOCTET, which is generally +"char" or "unsigned char". On a machine where char is not exactly 8 bits +wide, you must define JOCTET as a wider data type and then modify the data +source and destination modules to transcribe the work arrays into 8-bit units +on external storage. + +A data destination manager struct contains a pointer and count defining the +next byte to write in the work buffer and the remaining free space: + + JOCTET * next_output_byte; /* => next byte to write in buffer */ + size_t free_in_buffer; /* # of byte spaces remaining in buffer */ + +The library increments the pointer and decrements the count until the buffer +is filled. The manager's empty_output_buffer method must reset the pointer +and count. The manager is expected to remember the buffer's starting address +and total size in private fields not visible to the library. + +A data destination manager provides three methods: + +init_destination (j_compress_ptr cinfo) + Initialize destination. This is called by jpeg_start_compress() + before any data is actually written. It must initialize + next_output_byte and free_in_buffer. free_in_buffer must be + initialized to a positive value. + +empty_output_buffer (j_compress_ptr cinfo) + This is called whenever the buffer has filled (free_in_buffer + reaches zero). In typical applications, it should write out the + *entire* buffer (use the saved start address and buffer length; + ignore the current state of next_output_byte and free_in_buffer). + Then reset the pointer & count to the start of the buffer, and + return TRUE indicating that the buffer has been dumped. + free_in_buffer must be set to a positive value when TRUE is + returned. A FALSE return should only be used when I/O suspension is + desired (this operating mode is discussed in the next section). + +term_destination (j_compress_ptr cinfo) + Terminate destination --- called by jpeg_finish_compress() after all + data has been written. In most applications, this must flush any + data remaining in the buffer. Use either next_output_byte or + free_in_buffer to determine how much data is in the buffer. + +term_destination() is NOT called by jpeg_abort() or jpeg_destroy(). If you +want the destination manager to be cleaned up during an abort, you must do it +yourself. + +You will also need code to create a jpeg_destination_mgr struct, fill in its +method pointers, and insert a pointer to the struct into the "dest" field of +the JPEG compression object. This can be done in-line in your setup code if +you like, but it's probably cleaner to provide a separate routine similar to +the jpeg_stdio_dest() or jpeg_mem_dest() routines of the supplied destination +managers. + +Decompression source managers follow a parallel design, but with some +additional frammishes. The source manager struct contains a pointer and count +defining the next byte to read from the work buffer and the number of bytes +remaining: + + const JOCTET * next_input_byte; /* => next byte to read from buffer */ + size_t bytes_in_buffer; /* # of bytes remaining in buffer */ + +The library increments the pointer and decrements the count until the buffer +is emptied. The manager's fill_input_buffer method must reset the pointer and +count. In most applications, the manager must remember the buffer's starting +address and total size in private fields not visible to the library. + +A data source manager provides five methods: + +init_source (j_decompress_ptr cinfo) + Initialize source. This is called by jpeg_read_header() before any + data is actually read. Unlike init_destination(), it may leave + bytes_in_buffer set to 0 (in which case a fill_input_buffer() call + will occur immediately). + +fill_input_buffer (j_decompress_ptr cinfo) + This is called whenever bytes_in_buffer has reached zero and more + data is wanted. In typical applications, it should read fresh data + into the buffer (ignoring the current state of next_input_byte and + bytes_in_buffer), reset the pointer & count to the start of the + buffer, and return TRUE indicating that the buffer has been reloaded. + It is not necessary to fill the buffer entirely, only to obtain at + least one more byte. bytes_in_buffer MUST be set to a positive value + if TRUE is returned. A FALSE return should only be used when I/O + suspension is desired (this mode is discussed in the next section). + +skip_input_data (j_decompress_ptr cinfo, long num_bytes) + Skip num_bytes worth of data. The buffer pointer and count should + be advanced over num_bytes input bytes, refilling the buffer as + needed. This is used to skip over a potentially large amount of + uninteresting data (such as an APPn marker). In some applications + it may be possible to optimize away the reading of the skipped data, + but it's not clear that being smart is worth much trouble; large + skips are uncommon. bytes_in_buffer may be zero on return. + A zero or negative skip count should be treated as a no-op. + +resync_to_restart (j_decompress_ptr cinfo, int desired) + This routine is called only when the decompressor has failed to find + a restart (RSTn) marker where one is expected. Its mission is to + find a suitable point for resuming decompression. For most + applications, we recommend that you just use the default resync + procedure, jpeg_resync_to_restart(). However, if you are able to back + up in the input data stream, or if you have a-priori knowledge about + the likely location of restart markers, you may be able to do better. + Read the read_restart_marker() and jpeg_resync_to_restart() routines + in jdmarker.c if you think you'd like to implement your own resync + procedure. + +term_source (j_decompress_ptr cinfo) + Terminate source --- called by jpeg_finish_decompress() after all + data has been read. Often a no-op. + +For both fill_input_buffer() and skip_input_data(), there is no such thing +as an EOF return. If the end of the file has been reached, the routine has +a choice of exiting via ERREXIT() or inserting fake data into the buffer. +In most cases, generating a warning message and inserting a fake EOI marker +is the best course of action --- this will allow the decompressor to output +however much of the image is there. In pathological cases, the decompressor +may swallow the EOI and again demand data ... just keep feeding it fake EOIs. +jdatasrc.c illustrates the recommended error recovery behavior. + +term_source() is NOT called by jpeg_abort() or jpeg_destroy(). If you want +the source manager to be cleaned up during an abort, you must do it yourself. + +You will also need code to create a jpeg_source_mgr struct, fill in its method +pointers, and insert a pointer to the struct into the "src" field of the JPEG +decompression object. This can be done in-line in your setup code if you +like, but it's probably cleaner to provide a separate routine similar to the +jpeg_stdio_src() or jpeg_mem_src() routines of the supplied source managers. + +For more information, consult the memory and stdio source and destination +managers in jdatasrc.c and jdatadst.c. + + +I/O suspension +-------------- + +Some applications need to use the JPEG library as an incremental memory-to- +memory filter: when the compressed data buffer is filled or emptied, they want +control to return to the outer loop, rather than expecting that the buffer can +be emptied or reloaded within the data source/destination manager subroutine. +The library supports this need by providing an "I/O suspension" mode, which we +describe in this section. + +The I/O suspension mode is not a panacea: nothing is guaranteed about the +maximum amount of time spent in any one call to the library, so it will not +eliminate response-time problems in single-threaded applications. If you +need guaranteed response time, we suggest you "bite the bullet" and implement +a real multi-tasking capability. + +To use I/O suspension, cooperation is needed between the calling application +and the data source or destination manager; you will always need a custom +source/destination manager. (Please read the previous section if you haven't +already.) The basic idea is that the empty_output_buffer() or +fill_input_buffer() routine is a no-op, merely returning FALSE to indicate +that it has done nothing. Upon seeing this, the JPEG library suspends +operation and returns to its caller. The surrounding application is +responsible for emptying or refilling the work buffer before calling the +JPEG library again. + +Compression suspension: + +For compression suspension, use an empty_output_buffer() routine that returns +FALSE; typically it will not do anything else. This will cause the +compressor to return to the caller of jpeg_write_scanlines(), with the return +value indicating that not all the supplied scanlines have been accepted. +The application must make more room in the output buffer, adjust the output +buffer pointer/count appropriately, and then call jpeg_write_scanlines() +again, pointing to the first unconsumed scanline. + +When forced to suspend, the compressor will backtrack to a convenient stopping +point (usually the start of the current MCU); it will regenerate some output +data when restarted. Therefore, although empty_output_buffer() is only +called when the buffer is filled, you should NOT write out the entire buffer +after a suspension. Write only the data up to the current position of +next_output_byte/free_in_buffer. The data beyond that point will be +regenerated after resumption. + +Because of the backtracking behavior, a good-size output buffer is essential +for efficiency; you don't want the compressor to suspend often. (In fact, an +overly small buffer could lead to infinite looping, if a single MCU required +more data than would fit in the buffer.) We recommend a buffer of at least +several Kbytes. You may want to insert explicit code to ensure that you don't +call jpeg_write_scanlines() unless there is a reasonable amount of space in +the output buffer; in other words, flush the buffer before trying to compress +more data. + +The compressor does not allow suspension while it is trying to write JPEG +markers at the beginning and end of the file. This means that: + * At the beginning of a compression operation, there must be enough free + space in the output buffer to hold the header markers (typically 600 or + so bytes). The recommended buffer size is bigger than this anyway, so + this is not a problem as long as you start with an empty buffer. However, + this restriction might catch you if you insert large special markers, such + as a JFIF thumbnail image, without flushing the buffer afterwards. + * When you call jpeg_finish_compress(), there must be enough space in the + output buffer to emit any buffered data and the final EOI marker. In the + current implementation, half a dozen bytes should suffice for this, but + for safety's sake we recommend ensuring that at least 100 bytes are free + before calling jpeg_finish_compress(). + +A more significant restriction is that jpeg_finish_compress() cannot suspend. +This means you cannot use suspension with multi-pass operating modes, namely +Huffman code optimization and multiple-scan output. Those modes write the +whole file during jpeg_finish_compress(), which will certainly result in +buffer overrun. (Note that this restriction applies only to compression, +not decompression. The decompressor supports input suspension in all of its +operating modes.) + +Decompression suspension: + +For decompression suspension, use a fill_input_buffer() routine that simply +returns FALSE (except perhaps during error recovery, as discussed below). +This will cause the decompressor to return to its caller with an indication +that suspension has occurred. This can happen at four places: + * jpeg_read_header(): will return JPEG_SUSPENDED. + * jpeg_start_decompress(): will return FALSE, rather than its usual TRUE. + * jpeg_read_scanlines(): will return the number of scanlines already + completed (possibly 0). + * jpeg_finish_decompress(): will return FALSE, rather than its usual TRUE. +The surrounding application must recognize these cases, load more data into +the input buffer, and repeat the call. In the case of jpeg_read_scanlines(), +increment the passed pointers past any scanlines successfully read. + +Just as with compression, the decompressor will typically backtrack to a +convenient restart point before suspending. When fill_input_buffer() is +called, next_input_byte/bytes_in_buffer point to the current restart point, +which is where the decompressor will backtrack to if FALSE is returned. +The data beyond that position must NOT be discarded if you suspend; it needs +to be re-read upon resumption. In most implementations, you'll need to shift +this data down to the start of your work buffer and then load more data after +it. Again, this behavior means that a several-Kbyte work buffer is essential +for decent performance; furthermore, you should load a reasonable amount of +new data before resuming decompression. (If you loaded, say, only one new +byte each time around, you could waste a LOT of cycles.) + +The skip_input_data() source manager routine requires special care in a +suspension scenario. This routine is NOT granted the ability to suspend the +decompressor; it can decrement bytes_in_buffer to zero, but no more. If the +requested skip distance exceeds the amount of data currently in the input +buffer, then skip_input_data() must set bytes_in_buffer to zero and record the +additional skip distance somewhere else. The decompressor will immediately +call fill_input_buffer(), which should return FALSE, which will cause a +suspension return. The surrounding application must then arrange to discard +the recorded number of bytes before it resumes loading the input buffer. +(Yes, this design is rather baroque, but it avoids complexity in the far more +common case where a non-suspending source manager is used.) + +If the input data has been exhausted, we recommend that you emit a warning +and insert dummy EOI markers just as a non-suspending data source manager +would do. This can be handled either in the surrounding application logic or +within fill_input_buffer(); the latter is probably more efficient. If +fill_input_buffer() knows that no more data is available, it can set the +pointer/count to point to a dummy EOI marker and then return TRUE just as +though it had read more data in a non-suspending situation. + +The decompressor does not attempt to suspend within standard JPEG markers; +instead it will backtrack to the start of the marker and reprocess the whole +marker next time. Hence the input buffer must be large enough to hold the +longest standard marker in the file. Standard JPEG markers should normally +not exceed a few hundred bytes each (DHT tables are typically the longest). +We recommend at least a 2K buffer for performance reasons, which is much +larger than any correct marker is likely to be. For robustness against +damaged marker length counts, you may wish to insert a test in your +application for the case that the input buffer is completely full and yet +the decoder has suspended without consuming any data --- otherwise, if this +situation did occur, it would lead to an endless loop. (The library can't +provide this test since it has no idea whether "the buffer is full", or +even whether there is a fixed-size input buffer.) + +The input buffer would need to be 64K to allow for arbitrary COM or APPn +markers, but these are handled specially: they are either saved into allocated +memory, or skipped over by calling skip_input_data(). In the former case, +suspension is handled correctly, and in the latter case, the problem of +buffer overrun is placed on skip_input_data's shoulders, as explained above. +Note that if you provide your own marker handling routine for large markers, +you should consider how to deal with buffer overflow. + +Multiple-buffer management: + +In some applications it is desirable to store the compressed data in a linked +list of buffer areas, so as to avoid data copying. This can be handled by +having empty_output_buffer() or fill_input_buffer() set the pointer and count +to reference the next available buffer; FALSE is returned only if no more +buffers are available. Although seemingly straightforward, there is a +pitfall in this approach: the backtrack that occurs when FALSE is returned +could back up into an earlier buffer. For example, when fill_input_buffer() +is called, the current pointer & count indicate the backtrack restart point. +Since fill_input_buffer() will set the pointer and count to refer to a new +buffer, the restart position must be saved somewhere else. Suppose a second +call to fill_input_buffer() occurs in the same library call, and no +additional input data is available, so fill_input_buffer must return FALSE. +If the JPEG library has not moved the pointer/count forward in the current +buffer, then *the correct restart point is the saved position in the prior +buffer*. Prior buffers may be discarded only after the library establishes +a restart point within a later buffer. Similar remarks apply for output into +a chain of buffers. + +The library will never attempt to backtrack over a skip_input_data() call, +so any skipped data can be permanently discarded. You still have to deal +with the case of skipping not-yet-received data, however. + +It's much simpler to use only a single buffer; when fill_input_buffer() is +called, move any unconsumed data (beyond the current pointer/count) down to +the beginning of this buffer and then load new data into the remaining buffer +space. This approach requires a little more data copying but is far easier +to get right. + + +Progressive JPEG support +------------------------ + +Progressive JPEG rearranges the stored data into a series of scans of +increasing quality. In situations where a JPEG file is transmitted across a +slow communications link, a decoder can generate a low-quality image very +quickly from the first scan, then gradually improve the displayed quality as +more scans are received. The final image after all scans are complete is +identical to that of a regular (sequential) JPEG file of the same quality +setting. Progressive JPEG files are often slightly smaller than equivalent +sequential JPEG files, but the possibility of incremental display is the main +reason for using progressive JPEG. + +The IJG encoder library generates progressive JPEG files when given a +suitable "scan script" defining how to divide the data into scans. +Creation of progressive JPEG files is otherwise transparent to the encoder. +Progressive JPEG files can also be read transparently by the decoder library. +If the decoding application simply uses the library as defined above, it +will receive a final decoded image without any indication that the file was +progressive. Of course, this approach does not allow incremental display. +To perform incremental display, an application needs to use the decoder +library's "buffered-image" mode, in which it receives a decoded image +multiple times. + +Each displayed scan requires about as much work to decode as a full JPEG +image of the same size, so the decoder must be fairly fast in relation to the +data transmission rate in order to make incremental display useful. However, +it is possible to skip displaying the image and simply add the incoming bits +to the decoder's coefficient buffer. This is fast because only Huffman +decoding need be done, not IDCT, upsampling, colorspace conversion, etc. +The IJG decoder library allows the application to switch dynamically between +displaying the image and simply absorbing the incoming bits. A properly +coded application can automatically adapt the number of display passes to +suit the time available as the image is received. Also, a final +higher-quality display cycle can be performed from the buffered data after +the end of the file is reached. + +Progressive compression: + +To create a progressive JPEG file (or a multiple-scan sequential JPEG file), +set the scan_info cinfo field to point to an array of scan descriptors, and +perform compression as usual. Instead of constructing your own scan list, +you can call the jpeg_simple_progression() helper routine to create a +recommended progression sequence; this method should be used by all +applications that don't want to get involved in the nitty-gritty of +progressive scan sequence design. (If you want to provide user control of +scan sequences, you may wish to borrow the scan script reading code found +in rdswitch.c, so that you can read scan script files just like cjpeg's.) +When scan_info is not NULL, the compression library will store DCT'd data +into a buffer array as jpeg_write_scanlines() is called, and will emit all +the requested scans during jpeg_finish_compress(). This implies that +multiple-scan output cannot be created with a suspending data destination +manager, since jpeg_finish_compress() does not support suspension. We +should also note that the compressor currently forces Huffman optimization +mode when creating a progressive JPEG file, because the default Huffman +tables are unsuitable for progressive files. + +Progressive decompression: + +When buffered-image mode is not used, the decoder library will read all of +a multi-scan file during jpeg_start_decompress(), so that it can provide a +final decoded image. (Here "multi-scan" means either progressive or +multi-scan sequential.) This makes multi-scan files transparent to the +decoding application. However, existing applications that used suspending +input with version 5 of the IJG library will need to be modified to check +for a suspension return from jpeg_start_decompress(). + +To perform incremental display, an application must use the library's +buffered-image mode. This is described in the next section. + + +Buffered-image mode +------------------- + +In buffered-image mode, the library stores the partially decoded image in a +coefficient buffer, from which it can be read out as many times as desired. +This mode is typically used for incremental display of progressive JPEG files, +but it can be used with any JPEG file. Each scan of a progressive JPEG file +adds more data (more detail) to the buffered image. The application can +display in lockstep with the source file (one display pass per input scan), +or it can allow input processing to outrun display processing. By making +input and display processing run independently, it is possible for the +application to adapt progressive display to a wide range of data transmission +rates. + +The basic control flow for buffered-image decoding is + + jpeg_create_decompress() + set data source + jpeg_read_header() + set overall decompression parameters + cinfo.buffered_image = TRUE; /* select buffered-image mode */ + jpeg_start_decompress() + for (each output pass) { + adjust output decompression parameters if required + jpeg_start_output() /* start a new output pass */ + for (all scanlines in image) { + jpeg_read_scanlines() + display scanlines + } + jpeg_finish_output() /* terminate output pass */ + } + jpeg_finish_decompress() + jpeg_destroy_decompress() + +This differs from ordinary unbuffered decoding in that there is an additional +level of looping. The application can choose how many output passes to make +and how to display each pass. + +The simplest approach to displaying progressive images is to do one display +pass for each scan appearing in the input file. In this case the outer loop +condition is typically + while (! jpeg_input_complete(&cinfo)) +and the start-output call should read + jpeg_start_output(&cinfo, cinfo.input_scan_number); +The second parameter to jpeg_start_output() indicates which scan of the input +file is to be displayed; the scans are numbered starting at 1 for this +purpose. (You can use a loop counter starting at 1 if you like, but using +the library's input scan counter is easier.) The library automatically reads +data as necessary to complete each requested scan, and jpeg_finish_output() +advances to the next scan or end-of-image marker (hence input_scan_number +will be incremented by the time control arrives back at jpeg_start_output()). +With this technique, data is read from the input file only as needed, and +input and output processing run in lockstep. + +After reading the final scan and reaching the end of the input file, the +buffered image remains available; it can be read additional times by +repeating the jpeg_start_output()/jpeg_read_scanlines()/jpeg_finish_output() +sequence. For example, a useful technique is to use fast one-pass color +quantization for display passes made while the image is arriving, followed by +a final display pass using two-pass quantization for highest quality. This +is done by changing the library parameters before the final output pass. +Changing parameters between passes is discussed in detail below. + +In general the last scan of a progressive file cannot be recognized as such +until after it is read, so a post-input display pass is the best approach if +you want special processing in the final pass. + +When done with the image, be sure to call jpeg_finish_decompress() to release +the buffered image (or just use jpeg_destroy_decompress()). + +If input data arrives faster than it can be displayed, the application can +cause the library to decode input data in advance of what's needed to produce +output. This is done by calling the routine jpeg_consume_input(). +The return value is one of the following: + JPEG_REACHED_SOS: reached an SOS marker (the start of a new scan) + JPEG_REACHED_EOI: reached the EOI marker (end of image) + JPEG_ROW_COMPLETED: completed reading one MCU row of compressed data + JPEG_SCAN_COMPLETED: completed reading last MCU row of current scan + JPEG_SUSPENDED: suspended before completing any of the above +(JPEG_SUSPENDED can occur only if a suspending data source is used.) This +routine can be called at any time after initializing the JPEG object. It +reads some additional data and returns when one of the indicated significant +events occurs. (If called after the EOI marker is reached, it will +immediately return JPEG_REACHED_EOI without attempting to read more data.) + +The library's output processing will automatically call jpeg_consume_input() +whenever the output processing overtakes the input; thus, simple lockstep +display requires no direct calls to jpeg_consume_input(). But by adding +calls to jpeg_consume_input(), you can absorb data in advance of what is +being displayed. This has two benefits: + * You can limit buildup of unprocessed data in your input buffer. + * You can eliminate extra display passes by paying attention to the + state of the library's input processing. + +The first of these benefits only requires interspersing calls to +jpeg_consume_input() with your display operations and any other processing +you may be doing. To avoid wasting cycles due to backtracking, it's best to +call jpeg_consume_input() only after a hundred or so new bytes have arrived. +This is discussed further under "I/O suspension", above. (Note: the JPEG +library currently is not thread-safe. You must not call jpeg_consume_input() +from one thread of control if a different library routine is working on the +same JPEG object in another thread.) + +When input arrives fast enough that more than one new scan is available +before you start a new output pass, you may as well skip the output pass +corresponding to the completed scan. This occurs for free if you pass +cinfo.input_scan_number as the target scan number to jpeg_start_output(). +The input_scan_number field is simply the index of the scan currently being +consumed by the input processor. You can ensure that this is up-to-date by +emptying the input buffer just before calling jpeg_start_output(): call +jpeg_consume_input() repeatedly until it returns JPEG_SUSPENDED or +JPEG_REACHED_EOI. + +The target scan number passed to jpeg_start_output() is saved in the +cinfo.output_scan_number field. The library's output processing calls +jpeg_consume_input() whenever the current input scan number and row within +that scan is less than or equal to the current output scan number and row. +Thus, input processing can "get ahead" of the output processing but is not +allowed to "fall behind". You can achieve several different effects by +manipulating this interlock rule. For example, if you pass a target scan +number greater than the current input scan number, the output processor will +wait until that scan starts to arrive before producing any output. (To avoid +an infinite loop, the target scan number is automatically reset to the last +scan number when the end of image is reached. Thus, if you specify a large +target scan number, the library will just absorb the entire input file and +then perform an output pass. This is effectively the same as what +jpeg_start_decompress() does when you don't select buffered-image mode.) +When you pass a target scan number equal to the current input scan number, +the image is displayed no faster than the current input scan arrives. The +final possibility is to pass a target scan number less than the current input +scan number; this disables the input/output interlock and causes the output +processor to simply display whatever it finds in the image buffer, without +waiting for input. (However, the library will not accept a target scan +number less than one, so you can't avoid waiting for the first scan.) + +When data is arriving faster than the output display processing can advance +through the image, jpeg_consume_input() will store data into the buffered +image beyond the point at which the output processing is reading data out +again. If the input arrives fast enough, it may "wrap around" the buffer to +the point where the input is more than one whole scan ahead of the output. +If the output processing simply proceeds through its display pass without +paying attention to the input, the effect seen on-screen is that the lower +part of the image is one or more scans better in quality than the upper part. +Then, when the next output scan is started, you have a choice of what target +scan number to use. The recommended choice is to use the current input scan +number at that time, which implies that you've skipped the output scans +corresponding to the input scans that were completed while you processed the +previous output scan. In this way, the decoder automatically adapts its +speed to the arriving data, by skipping output scans as necessary to keep up +with the arriving data. + +When using this strategy, you'll want to be sure that you perform a final +output pass after receiving all the data; otherwise your last display may not +be full quality across the whole screen. So the right outer loop logic is +something like this: + do { + absorb any waiting input by calling jpeg_consume_input() + final_pass = jpeg_input_complete(&cinfo); + adjust output decompression parameters if required + jpeg_start_output(&cinfo, cinfo.input_scan_number); + ... + jpeg_finish_output() + } while (! final_pass); +rather than quitting as soon as jpeg_input_complete() returns TRUE. This +arrangement makes it simple to use higher-quality decoding parameters +for the final pass. But if you don't want to use special parameters for +the final pass, the right loop logic is like this: + for (;;) { + absorb any waiting input by calling jpeg_consume_input() + jpeg_start_output(&cinfo, cinfo.input_scan_number); + ... + jpeg_finish_output() + if (jpeg_input_complete(&cinfo) && + cinfo.input_scan_number == cinfo.output_scan_number) + break; + } +In this case you don't need to know in advance whether an output pass is to +be the last one, so it's not necessary to have reached EOF before starting +the final output pass; rather, what you want to test is whether the output +pass was performed in sync with the final input scan. This form of the loop +will avoid an extra output pass whenever the decoder is able (or nearly able) +to keep up with the incoming data. + +When the data transmission speed is high, you might begin a display pass, +then find that much or all of the file has arrived before you can complete +the pass. (You can detect this by noting the JPEG_REACHED_EOI return code +from jpeg_consume_input(), or equivalently by testing jpeg_input_complete().) +In this situation you may wish to abort the current display pass and start a +new one using the newly arrived information. To do so, just call +jpeg_finish_output() and then start a new pass with jpeg_start_output(). + +A variant strategy is to abort and restart display if more than one complete +scan arrives during an output pass; this can be detected by noting +JPEG_REACHED_SOS returns and/or examining cinfo.input_scan_number. This +idea should be employed with caution, however, since the display process +might never get to the bottom of the image before being aborted, resulting +in the lower part of the screen being several passes worse than the upper. +In most cases it's probably best to abort an output pass only if the whole +file has arrived and you want to begin the final output pass immediately. + +When receiving data across a communication link, we recommend always using +the current input scan number for the output target scan number; if a +higher-quality final pass is to be done, it should be started (aborting any +incomplete output pass) as soon as the end of file is received. However, +many other strategies are possible. For example, the application can examine +the parameters of the current input scan and decide whether to display it or +not. If the scan contains only chroma data, one might choose not to use it +as the target scan, expecting that the scan will be small and will arrive +quickly. To skip to the next scan, call jpeg_consume_input() until it +returns JPEG_REACHED_SOS or JPEG_REACHED_EOI. Or just use the next higher +number as the target scan for jpeg_start_output(); but that method doesn't +let you inspect the next scan's parameters before deciding to display it. + + +In buffered-image mode, jpeg_start_decompress() never performs input and +thus never suspends. An application that uses input suspension with +buffered-image mode must be prepared for suspension returns from these +routines: +* jpeg_start_output() performs input only if you request 2-pass quantization + and the target scan isn't fully read yet. (This is discussed below.) +* jpeg_read_scanlines(), as always, returns the number of scanlines that it + was able to produce before suspending. +* jpeg_finish_output() will read any markers following the target scan, + up to the end of the file or the SOS marker that begins another scan. + (But it reads no input if jpeg_consume_input() has already reached the + end of the file or a SOS marker beyond the target output scan.) +* jpeg_finish_decompress() will read until the end of file, and thus can + suspend if the end hasn't already been reached (as can be tested by + calling jpeg_input_complete()). +jpeg_start_output(), jpeg_finish_output(), and jpeg_finish_decompress() +all return TRUE if they completed their tasks, FALSE if they had to suspend. +In the event of a FALSE return, the application must load more input data +and repeat the call. Applications that use non-suspending data sources need +not check the return values of these three routines. + + +It is possible to change decoding parameters between output passes in the +buffered-image mode. The decoder library currently supports only very +limited changes of parameters. ONLY THE FOLLOWING parameter changes are +allowed after jpeg_start_decompress() is called: +* dct_method can be changed before each call to jpeg_start_output(). + For example, one could use a fast DCT method for early scans, changing + to a higher quality method for the final scan. +* dither_mode can be changed before each call to jpeg_start_output(); + of course this has no impact if not using color quantization. Typically + one would use ordered dither for initial passes, then switch to + Floyd-Steinberg dither for the final pass. Caution: changing dither mode + can cause more memory to be allocated by the library. Although the amount + of memory involved is not large (a scanline or so), it may cause the + initial max_memory_to_use specification to be exceeded, which in the worst + case would result in an out-of-memory failure. +* do_block_smoothing can be changed before each call to jpeg_start_output(). + This setting is relevant only when decoding a progressive JPEG image. + During the first DC-only scan, block smoothing provides a very "fuzzy" look + instead of the very "blocky" look seen without it; which is better seems a + matter of personal taste. But block smoothing is nearly always a win + during later stages, especially when decoding a successive-approximation + image: smoothing helps to hide the slight blockiness that otherwise shows + up on smooth gradients until the lowest coefficient bits are sent. +* Color quantization mode can be changed under the rules described below. + You *cannot* change between full-color and quantized output (because that + would alter the required I/O buffer sizes), but you can change which + quantization method is used. + +When generating color-quantized output, changing quantization method is a +very useful way of switching between high-speed and high-quality display. +The library allows you to change among its three quantization methods: +1. Single-pass quantization to a fixed color cube. + Selected by cinfo.two_pass_quantize = FALSE and cinfo.colormap = NULL. +2. Single-pass quantization to an application-supplied colormap. + Selected by setting cinfo.colormap to point to the colormap (the value of + two_pass_quantize is ignored); also set cinfo.actual_number_of_colors. +3. Two-pass quantization to a colormap chosen specifically for the image. + Selected by cinfo.two_pass_quantize = TRUE and cinfo.colormap = NULL. + (This is the default setting selected by jpeg_read_header, but it is + probably NOT what you want for the first pass of progressive display!) +These methods offer successively better quality and lesser speed. However, +only the first method is available for quantizing in non-RGB color spaces. + +IMPORTANT: because the different quantizer methods have very different +working-storage requirements, the library requires you to indicate which +one(s) you intend to use before you call jpeg_start_decompress(). (If we did +not require this, the max_memory_to_use setting would be a complete fiction.) +You do this by setting one or more of these three cinfo fields to TRUE: + enable_1pass_quant Fixed color cube colormap + enable_external_quant Externally-supplied colormap + enable_2pass_quant Two-pass custom colormap +All three are initialized FALSE by jpeg_read_header(). But +jpeg_start_decompress() automatically sets TRUE the one selected by the +current two_pass_quantize and colormap settings, so you only need to set the +enable flags for any other quantization methods you plan to change to later. + +After setting the enable flags correctly at jpeg_start_decompress() time, you +can change to any enabled quantization method by setting two_pass_quantize +and colormap properly just before calling jpeg_start_output(). The following +special rules apply: +1. You must explicitly set cinfo.colormap to NULL when switching to 1-pass + or 2-pass mode from a different mode, or when you want the 2-pass + quantizer to be re-run to generate a new colormap. +2. To switch to an external colormap, or to change to a different external + colormap than was used on the prior pass, you must call + jpeg_new_colormap() after setting cinfo.colormap. +NOTE: if you want to use the same colormap as was used in the prior pass, +you should not do either of these things. This will save some nontrivial +switchover costs. +(These requirements exist because cinfo.colormap will always be non-NULL +after completing a prior output pass, since both the 1-pass and 2-pass +quantizers set it to point to their output colormaps. Thus you have to +do one of these two things to notify the library that something has changed. +Yup, it's a bit klugy, but it's necessary to do it this way for backwards +compatibility.) + +Note that in buffered-image mode, the library generates any requested colormap +during jpeg_start_output(), not during jpeg_start_decompress(). + +When using two-pass quantization, jpeg_start_output() makes a pass over the +buffered image to determine the optimum color map; it therefore may take a +significant amount of time, whereas ordinarily it does little work. The +progress monitor hook is called during this pass, if defined. It is also +important to realize that if the specified target scan number is greater than +or equal to the current input scan number, jpeg_start_output() will attempt +to consume input as it makes this pass. If you use a suspending data source, +you need to check for a FALSE return from jpeg_start_output() under these +conditions. The combination of 2-pass quantization and a not-yet-fully-read +target scan is the only case in which jpeg_start_output() will consume input. + + +Application authors who support buffered-image mode may be tempted to use it +for all JPEG images, even single-scan ones. This will work, but it is +inefficient: there is no need to create an image-sized coefficient buffer for +single-scan images. Requesting buffered-image mode for such an image wastes +memory. Worse, it can cost time on large images, since the buffered data has +to be swapped out or written to a temporary file. If you are concerned about +maximum performance on baseline JPEG files, you should use buffered-image +mode only when the incoming file actually has multiple scans. This can be +tested by calling jpeg_has_multiple_scans(), which will return a correct +result at any time after jpeg_read_header() completes. + +It is also worth noting that when you use jpeg_consume_input() to let input +processing get ahead of output processing, the resulting pattern of access to +the coefficient buffer is quite nonsequential. It's best to use the memory +manager jmemnobs.c if you can (ie, if you have enough real or virtual main +memory). If not, at least make sure that max_memory_to_use is set as high as +possible. If the JPEG memory manager has to use a temporary file, you will +probably see a lot of disk traffic and poor performance. (This could be +improved with additional work on the memory manager, but we haven't gotten +around to it yet.) + +In some applications it may be convenient to use jpeg_consume_input() for all +input processing, including reading the initial markers; that is, you may +wish to call jpeg_consume_input() instead of jpeg_read_header() during +startup. This works, but note that you must check for JPEG_REACHED_SOS and +JPEG_REACHED_EOI return codes as the equivalent of jpeg_read_header's codes. +Once the first SOS marker has been reached, you must call +jpeg_start_decompress() before jpeg_consume_input() will consume more input; +it'll just keep returning JPEG_REACHED_SOS until you do. If you read a +tables-only file this way, jpeg_consume_input() will return JPEG_REACHED_EOI +without ever returning JPEG_REACHED_SOS; be sure to check for this case. +If this happens, the decompressor will not read any more input until you call +jpeg_abort() to reset it. It is OK to call jpeg_consume_input() even when not +using buffered-image mode, but in that case it's basically a no-op after the +initial markers have been read: it will just return JPEG_SUSPENDED. + + +Abbreviated datastreams and multiple images +------------------------------------------- + +A JPEG compression or decompression object can be reused to process multiple +images. This saves a small amount of time per image by eliminating the +"create" and "destroy" operations, but that isn't the real purpose of the +feature. Rather, reuse of an object provides support for abbreviated JPEG +datastreams. Object reuse can also simplify processing a series of images in +a single input or output file. This section explains these features. + +A JPEG file normally contains several hundred bytes worth of quantization +and Huffman tables. In a situation where many images will be stored or +transmitted with identical tables, this may represent an annoying overhead. +The JPEG standard therefore permits tables to be omitted. The standard +defines three classes of JPEG datastreams: + * "Interchange" datastreams contain an image and all tables needed to decode + the image. These are the usual kind of JPEG file. + * "Abbreviated image" datastreams contain an image, but are missing some or + all of the tables needed to decode that image. + * "Abbreviated table specification" (henceforth "tables-only") datastreams + contain only table specifications. +To decode an abbreviated image, it is necessary to load the missing table(s) +into the decoder beforehand. This can be accomplished by reading a separate +tables-only file. A variant scheme uses a series of images in which the first +image is an interchange (complete) datastream, while subsequent ones are +abbreviated and rely on the tables loaded by the first image. It is assumed +that once the decoder has read a table, it will remember that table until a +new definition for the same table number is encountered. + +It is the application designer's responsibility to figure out how to associate +the correct tables with an abbreviated image. While abbreviated datastreams +can be useful in a closed environment, their use is strongly discouraged in +any situation where data exchange with other applications might be needed. +Caveat designer. + +The JPEG library provides support for reading and writing any combination of +tables-only datastreams and abbreviated images. In both compression and +decompression objects, a quantization or Huffman table will be retained for +the lifetime of the object, unless it is overwritten by a new table definition. + + +To create abbreviated image datastreams, it is only necessary to tell the +compressor not to emit some or all of the tables it is using. Each +quantization and Huffman table struct contains a boolean field "sent_table", +which normally is initialized to FALSE. For each table used by the image, the +header-writing process emits the table and sets sent_table = TRUE unless it is +already TRUE. (In normal usage, this prevents outputting the same table +definition multiple times, as would otherwise occur because the chroma +components typically share tables.) Thus, setting this field to TRUE before +calling jpeg_start_compress() will prevent the table from being written at +all. + +If you want to create a "pure" abbreviated image file containing no tables, +just call "jpeg_suppress_tables(&cinfo, TRUE)" after constructing all the +tables. If you want to emit some but not all tables, you'll need to set the +individual sent_table fields directly. + +To create an abbreviated image, you must also call jpeg_start_compress() +with a second parameter of FALSE, not TRUE. Otherwise jpeg_start_compress() +will force all the sent_table fields to FALSE. (This is a safety feature to +prevent abbreviated images from being created accidentally.) + +To create a tables-only file, perform the same parameter setup that you +normally would, but instead of calling jpeg_start_compress() and so on, call +jpeg_write_tables(&cinfo). This will write an abbreviated datastream +containing only SOI, DQT and/or DHT markers, and EOI. All the quantization +and Huffman tables that are currently defined in the compression object will +be emitted unless their sent_tables flag is already TRUE, and then all the +sent_tables flags will be set TRUE. + +A sure-fire way to create matching tables-only and abbreviated image files +is to proceed as follows: + + create JPEG compression object + set JPEG parameters + set destination to tables-only file + jpeg_write_tables(&cinfo); + set destination to image file + jpeg_start_compress(&cinfo, FALSE); + write data... + jpeg_finish_compress(&cinfo); + +Since the JPEG parameters are not altered between writing the table file and +the abbreviated image file, the same tables are sure to be used. Of course, +you can repeat the jpeg_start_compress() ... jpeg_finish_compress() sequence +many times to produce many abbreviated image files matching the table file. + +You cannot suppress output of the computed Huffman tables when Huffman +optimization is selected. (If you could, there'd be no way to decode the +image...) Generally, you don't want to set optimize_coding = TRUE when +you are trying to produce abbreviated files. + +In some cases you might want to compress an image using tables which are +not stored in the application, but are defined in an interchange or +tables-only file readable by the application. This can be done by setting up +a JPEG decompression object to read the specification file, then copying the +tables into your compression object. See jpeg_copy_critical_parameters() +for an example of copying quantization tables. + + +To read abbreviated image files, you simply need to load the proper tables +into the decompression object before trying to read the abbreviated image. +If the proper tables are stored in the application program, you can just +allocate the table structs and fill in their contents directly. For example, +to load a fixed quantization table into table slot "n": + + if (cinfo.quant_tbl_ptrs[n] == NULL) + cinfo.quant_tbl_ptrs[n] = jpeg_alloc_quant_table((j_common_ptr) &cinfo); + quant_ptr = cinfo.quant_tbl_ptrs[n]; /* quant_ptr is JQUANT_TBL* */ + for (i = 0; i < 64; i++) { + /* Qtable[] is desired quantization table, in natural array order */ + quant_ptr->quantval[i] = Qtable[i]; + } + +Code to load a fixed Huffman table is typically (for AC table "n"): + + if (cinfo.ac_huff_tbl_ptrs[n] == NULL) + cinfo.ac_huff_tbl_ptrs[n] = jpeg_alloc_huff_table((j_common_ptr) &cinfo); + huff_ptr = cinfo.ac_huff_tbl_ptrs[n]; /* huff_ptr is JHUFF_TBL* */ + for (i = 1; i <= 16; i++) { + /* counts[i] is number of Huffman codes of length i bits, i=1..16 */ + huff_ptr->bits[i] = counts[i]; + } + for (i = 0; i < 256; i++) { + /* symbols[] is the list of Huffman symbols, in code-length order */ + huff_ptr->huffval[i] = symbols[i]; + } + +(Note that trying to set cinfo.quant_tbl_ptrs[n] to point directly at a +constant JQUANT_TBL object is not safe. If the incoming file happened to +contain a quantization table definition, your master table would get +overwritten! Instead allocate a working table copy and copy the master table +into it, as illustrated above. Ditto for Huffman tables, of course.) + +You might want to read the tables from a tables-only file, rather than +hard-wiring them into your application. The jpeg_read_header() call is +sufficient to read a tables-only file. You must pass a second parameter of +FALSE to indicate that you do not require an image to be present. Thus, the +typical scenario is + + create JPEG decompression object + set source to tables-only file + jpeg_read_header(&cinfo, FALSE); + set source to abbreviated image file + jpeg_read_header(&cinfo, TRUE); + set decompression parameters + jpeg_start_decompress(&cinfo); + read data... + jpeg_finish_decompress(&cinfo); + +In some cases, you may want to read a file without knowing whether it contains +an image or just tables. In that case, pass FALSE and check the return value +from jpeg_read_header(): it will be JPEG_HEADER_OK if an image was found, +JPEG_HEADER_TABLES_ONLY if only tables were found. (A third return value, +JPEG_SUSPENDED, is possible when using a suspending data source manager.) +Note that jpeg_read_header() will not complain if you read an abbreviated +image for which you haven't loaded the missing tables; the missing-table check +occurs later, in jpeg_start_decompress(). + + +It is possible to read a series of images from a single source file by +repeating the jpeg_read_header() ... jpeg_finish_decompress() sequence, +without releasing/recreating the JPEG object or the data source module. +(If you did reinitialize, any partial bufferload left in the data source +buffer at the end of one image would be discarded, causing you to lose the +start of the next image.) When you use this method, stored tables are +automatically carried forward, so some of the images can be abbreviated images +that depend on tables from earlier images. + +If you intend to write a series of images into a single destination file, +you might want to make a specialized data destination module that doesn't +flush the output buffer at term_destination() time. This would speed things +up by some trifling amount. Of course, you'd need to remember to flush the +buffer after the last image. You can make the later images be abbreviated +ones by passing FALSE to jpeg_start_compress(). + + +Special markers +--------------- + +Some applications may need to insert or extract special data in the JPEG +datastream. The JPEG standard provides marker types "COM" (comment) and +"APP0" through "APP15" (application) to hold application-specific data. +Unfortunately, the use of these markers is not specified by the standard. +COM markers are fairly widely used to hold user-supplied text. The JFIF file +format spec uses APP0 markers with specified initial strings to hold certain +data. Adobe applications use APP14 markers beginning with the string "Adobe" +for miscellaneous data. Other APPn markers are rarely seen, but might +contain almost anything. + +If you wish to store user-supplied text, we recommend you use COM markers +and place readable 7-bit ASCII text in them. Newline conventions are not +standardized --- expect to find LF (Unix style), CR/LF (DOS style), or CR +(Mac style). A robust COM reader should be able to cope with random binary +garbage, including nulls, since some applications generate COM markers +containing non-ASCII junk. (But yours should not be one of them.) + +For program-supplied data, use an APPn marker, and be sure to begin it with an +identifying string so that you can tell whether the marker is actually yours. +It's probably best to avoid using APP0 or APP14 for any private markers. +(NOTE: the upcoming SPIFF standard will use APP8 markers; we recommend you +not use APP8 markers for any private purposes, either.) + +Keep in mind that at most 65533 bytes can be put into one marker, but you +can have as many markers as you like. + +By default, the IJG compression library will write a JFIF APP0 marker if the +selected JPEG colorspace is grayscale or YCbCr, or an Adobe APP14 marker if +the selected colorspace is RGB, CMYK, or YCCK. You can disable this, but +we don't recommend it. The decompression library will recognize JFIF and +Adobe markers and will set the JPEG colorspace properly when one is found. + + +You can write special markers immediately following the datastream header by +calling jpeg_write_marker() after jpeg_start_compress() and before the first +call to jpeg_write_scanlines(). When you do this, the markers appear after +the SOI and the JFIF APP0 and Adobe APP14 markers (if written), but before +all else. Specify the marker type parameter as "JPEG_COM" for COM or +"JPEG_APP0 + n" for APPn. (Actually, jpeg_write_marker will let you write +any marker type, but we don't recommend writing any other kinds of marker.) +For example, to write a user comment string pointed to by comment_text: + jpeg_write_marker(cinfo, JPEG_COM, comment_text, strlen(comment_text)); + +If it's not convenient to store all the marker data in memory at once, +you can instead call jpeg_write_m_header() followed by multiple calls to +jpeg_write_m_byte(). If you do it this way, it's your responsibility to +call jpeg_write_m_byte() exactly the number of times given in the length +parameter to jpeg_write_m_header(). (This method lets you empty the +output buffer partway through a marker, which might be important when +using a suspending data destination module. In any case, if you are using +a suspending destination, you should flush its buffer after inserting +any special markers. See "I/O suspension".) + +Or, if you prefer to synthesize the marker byte sequence yourself, +you can just cram it straight into the data destination module. + +If you are writing JFIF 1.02 extension markers (thumbnail images), don't +forget to set cinfo.JFIF_minor_version = 2 so that the encoder will write the +correct JFIF version number in the JFIF header marker. The library's default +is to write version 1.01, but that's wrong if you insert any 1.02 extension +markers. (We could probably get away with just defaulting to 1.02, but there +used to be broken decoders that would complain about unknown minor version +numbers. To reduce compatibility risks it's safest not to write 1.02 unless +you are actually using 1.02 extensions.) + + +When reading, two methods of handling special markers are available: +1. You can ask the library to save the contents of COM and/or APPn markers +into memory, and then examine them at your leisure afterwards. +2. You can supply your own routine to process COM and/or APPn markers +on-the-fly as they are read. +The first method is simpler to use, especially if you are using a suspending +data source; writing a marker processor that copes with input suspension is +not easy (consider what happens if the marker is longer than your available +input buffer). However, the second method conserves memory since the marker +data need not be kept around after it's been processed. + +For either method, you'd normally set up marker handling after creating a +decompression object and before calling jpeg_read_header(), because the +markers of interest will typically be near the head of the file and so will +be scanned by jpeg_read_header. Once you've established a marker handling +method, it will be used for the life of that decompression object +(potentially many datastreams), unless you change it. Marker handling is +determined separately for COM markers and for each APPn marker code. + + +To save the contents of special markers in memory, call + jpeg_save_markers(cinfo, marker_code, length_limit) +where marker_code is the marker type to save, JPEG_COM or JPEG_APP0+n. +(To arrange to save all the special marker types, you need to call this +routine 17 times, for COM and APP0-APP15.) If the incoming marker is longer +than length_limit data bytes, only length_limit bytes will be saved; this +parameter allows you to avoid chewing up memory when you only need to see the +first few bytes of a potentially large marker. If you want to save all the +data, set length_limit to 0xFFFF; that is enough since marker lengths are only +16 bits. As a special case, setting length_limit to 0 prevents that marker +type from being saved at all. (That is the default behavior, in fact.) + +After jpeg_read_header() completes, you can examine the special markers by +following the cinfo->marker_list pointer chain. All the special markers in +the file appear in this list, in order of their occurrence in the file (but +omitting any markers of types you didn't ask for). Both the original data +length and the saved data length are recorded for each list entry; the latter +will not exceed length_limit for the particular marker type. Note that these +lengths exclude the marker length word, whereas the stored representation +within the JPEG file includes it. (Hence the maximum data length is really +only 65533.) + +It is possible that additional special markers appear in the file beyond the +SOS marker at which jpeg_read_header stops; if so, the marker list will be +extended during reading of the rest of the file. This is not expected to be +common, however. If you are short on memory you may want to reset the length +limit to zero for all marker types after finishing jpeg_read_header, to +ensure that the max_memory_to_use setting cannot be exceeded due to addition +of later markers. + +The marker list remains stored until you call jpeg_finish_decompress or +jpeg_abort, at which point the memory is freed and the list is set to empty. +(jpeg_destroy also releases the storage, of course.) + +Note that the library is internally interested in APP0 and APP14 markers; +if you try to set a small nonzero length limit on these types, the library +will silently force the length up to the minimum it wants. (But you can set +a zero length limit to prevent them from being saved at all.) Also, in a +16-bit environment, the maximum length limit may be constrained to less than +65533 by malloc() limitations. It is therefore best not to assume that the +effective length limit is exactly what you set it to be. + + +If you want to supply your own marker-reading routine, you do it by calling +jpeg_set_marker_processor(). A marker processor routine must have the +signature + boolean jpeg_marker_parser_method (j_decompress_ptr cinfo) +Although the marker code is not explicitly passed, the routine can find it +in cinfo->unread_marker. At the time of call, the marker proper has been +read from the data source module. The processor routine is responsible for +reading the marker length word and the remaining parameter bytes, if any. +Return TRUE to indicate success. (FALSE should be returned only if you are +using a suspending data source and it tells you to suspend. See the standard +marker processors in jdmarker.c for appropriate coding methods if you need to +use a suspending data source.) + +If you override the default APP0 or APP14 processors, it is up to you to +recognize JFIF and Adobe markers if you want colorspace recognition to occur +properly. We recommend copying and extending the default processors if you +want to do that. (A better idea is to save these marker types for later +examination by calling jpeg_save_markers(); that method doesn't interfere +with the library's own processing of these markers.) + +jpeg_set_marker_processor() and jpeg_save_markers() are mutually exclusive +--- if you call one it overrides any previous call to the other, for the +particular marker type specified. + +A simple example of an external COM processor can be found in djpeg.c. +Also, see jpegtran.c for an example of using jpeg_save_markers. + + +Raw (downsampled) image data +---------------------------- + +Some applications need to supply already-downsampled image data to the JPEG +compressor, or to receive raw downsampled data from the decompressor. The +library supports this requirement by allowing the application to write or +read raw data, bypassing the normal preprocessing or postprocessing steps. +The interface is different from the standard one and is somewhat harder to +use. If your interest is merely in bypassing color conversion, we recommend +that you use the standard interface and simply set jpeg_color_space = +in_color_space (or jpeg_color_space = out_color_space for decompression). +The mechanism described in this section is necessary only to supply or +receive downsampled image data, in which not all components have the same +dimensions. + + +To compress raw data, you must supply the data in the colorspace to be used +in the JPEG file (please read the earlier section on Special color spaces) +and downsampled to the sampling factors specified in the JPEG parameters. +You must supply the data in the format used internally by the JPEG library, +namely a JSAMPIMAGE array. This is an array of pointers to two-dimensional +arrays, each of type JSAMPARRAY. Each 2-D array holds the values for one +color component. This structure is necessary since the components are of +different sizes. If the image dimensions are not a multiple of the MCU size, +you must also pad the data correctly (usually, this is done by replicating +the last column and/or row). The data must be padded to a multiple of a DCT +block in each component: that is, each downsampled row must contain a +multiple of block_size valid samples, and there must be a multiple of +block_size sample rows for each component. (For applications such as +conversion of digital TV images, the standard image size is usually a +multiple of the DCT block size, so that no padding need actually be done.) + +The procedure for compression of raw data is basically the same as normal +compression, except that you call jpeg_write_raw_data() in place of +jpeg_write_scanlines(). Before calling jpeg_start_compress(), you must do +the following: + * Set cinfo->raw_data_in to TRUE. (It is set FALSE by jpeg_set_defaults().) + This notifies the library that you will be supplying raw data. + Furthermore, set cinfo->do_fancy_downsampling to FALSE if you want to use + real downsampled data. (It is set TRUE by jpeg_set_defaults().) + * Ensure jpeg_color_space is correct --- an explicit jpeg_set_colorspace() + call is a good idea. Note that since color conversion is bypassed, + in_color_space is ignored, except that jpeg_set_defaults() uses it to + choose the default jpeg_color_space setting. + * Ensure the sampling factors, cinfo->comp_info[i].h_samp_factor and + cinfo->comp_info[i].v_samp_factor, are correct. Since these indicate the + dimensions of the data you are supplying, it's wise to set them + explicitly, rather than assuming the library's defaults are what you want. + +To pass raw data to the library, call jpeg_write_raw_data() in place of +jpeg_write_scanlines(). The two routines work similarly except that +jpeg_write_raw_data takes a JSAMPIMAGE data array rather than JSAMPARRAY. +The scanlines count passed to and returned from jpeg_write_raw_data is +measured in terms of the component with the largest v_samp_factor. + +jpeg_write_raw_data() processes one MCU row per call, which is to say +v_samp_factor*block_size sample rows of each component. The passed num_lines +value must be at least max_v_samp_factor*block_size, and the return value +will be exactly that amount (or possibly some multiple of that amount, in +future library versions). This is true even on the last call at the bottom +of the image; don't forget to pad your data as necessary. + +The required dimensions of the supplied data can be computed for each +component as + cinfo->comp_info[i].width_in_blocks*block_size samples per row + cinfo->comp_info[i].height_in_blocks*block_size rows in image +after jpeg_start_compress() has initialized those fields. If the valid data +is smaller than this, it must be padded appropriately. For some sampling +factors and image sizes, additional dummy DCT blocks are inserted to make +the image a multiple of the MCU dimensions. The library creates such dummy +blocks itself; it does not read them from your supplied data. Therefore you +need never pad by more than block_size samples. An example may help here. +Assume 2h2v downsampling of YCbCr data, that is + cinfo->comp_info[0].h_samp_factor = 2 for Y + cinfo->comp_info[0].v_samp_factor = 2 + cinfo->comp_info[1].h_samp_factor = 1 for Cb + cinfo->comp_info[1].v_samp_factor = 1 + cinfo->comp_info[2].h_samp_factor = 1 for Cr + cinfo->comp_info[2].v_samp_factor = 1 +and suppose that the nominal image dimensions (cinfo->image_width and +cinfo->image_height) are 101x101 pixels. Then jpeg_start_compress() will +compute downsampled_width = 101 and width_in_blocks = 13 for Y, +downsampled_width = 51 and width_in_blocks = 7 for Cb and Cr (and the same +for the height fields). You must pad the Y data to at least 13*8 = 104 +columns and rows, the Cb/Cr data to at least 7*8 = 56 columns and rows. The +MCU height is max_v_samp_factor = 2 DCT rows so you must pass at least 16 +scanlines on each call to jpeg_write_raw_data(), which is to say 16 actual +sample rows of Y and 8 each of Cb and Cr. A total of 7 MCU rows are needed, +so you must pass a total of 7*16 = 112 "scanlines". The last DCT block row +of Y data is dummy, so it doesn't matter what you pass for it in the data +arrays, but the scanlines count must total up to 112 so that all of the Cb +and Cr data gets passed. + +Output suspension is supported with raw-data compression: if the data +destination module suspends, jpeg_write_raw_data() will return 0. +In this case the same data rows must be passed again on the next call. + + +Decompression with raw data output implies bypassing all postprocessing. +You must deal with the color space and sampling factors present in the +incoming file. If your application only handles, say, 2h1v YCbCr data, +you must check for and fail on other color spaces or other sampling factors. +The library will not convert to a different color space for you. + +To obtain raw data output, set cinfo->raw_data_out = TRUE before +jpeg_start_decompress() (it is set FALSE by jpeg_read_header()). Be sure to +verify that the color space and sampling factors are ones you can handle. +Furthermore, set cinfo->do_fancy_upsampling = FALSE if you want to get real +downsampled data (it is set TRUE by jpeg_read_header()). +Then call jpeg_read_raw_data() in place of jpeg_read_scanlines(). The +decompression process is otherwise the same as usual. + +jpeg_read_raw_data() returns one MCU row per call, and thus you must pass a +buffer of at least max_v_samp_factor*block_size scanlines (scanline counting +is the same as for raw-data compression). The buffer you pass must be large +enough to hold the actual data plus padding to DCT-block boundaries. As with +compression, any entirely dummy DCT blocks are not processed so you need not +allocate space for them, but the total scanline count includes them. The +above example of computing buffer dimensions for raw-data compression is +equally valid for decompression. + +Input suspension is supported with raw-data decompression: if the data source +module suspends, jpeg_read_raw_data() will return 0. You can also use +buffered-image mode to read raw data in multiple passes. + + +Really raw data: DCT coefficients +--------------------------------- + +It is possible to read or write the contents of a JPEG file as raw DCT +coefficients. This facility is mainly intended for use in lossless +transcoding between different JPEG file formats. Other possible applications +include lossless cropping of a JPEG image, lossless reassembly of a +multi-strip or multi-tile TIFF/JPEG file into a single JPEG datastream, etc. + +To read the contents of a JPEG file as DCT coefficients, open the file and do +jpeg_read_header() as usual. But instead of calling jpeg_start_decompress() +and jpeg_read_scanlines(), call jpeg_read_coefficients(). This will read the +entire image into a set of virtual coefficient-block arrays, one array per +component. The return value is a pointer to an array of virtual-array +descriptors. Each virtual array can be accessed directly using the JPEG +memory manager's access_virt_barray method (see Memory management, below, +and also read structure.txt's discussion of virtual array handling). Or, +for simple transcoding to a different JPEG file format, the array list can +just be handed directly to jpeg_write_coefficients(). + +Each block in the block arrays contains quantized coefficient values in +normal array order (not JPEG zigzag order). The block arrays contain only +DCT blocks containing real data; any entirely-dummy blocks added to fill out +interleaved MCUs at the right or bottom edges of the image are discarded +during reading and are not stored in the block arrays. (The size of each +block array can be determined from the width_in_blocks and height_in_blocks +fields of the component's comp_info entry.) This is also the data format +expected by jpeg_write_coefficients(). + +When you are done using the virtual arrays, call jpeg_finish_decompress() +to release the array storage and return the decompression object to an idle +state; or just call jpeg_destroy() if you don't need to reuse the object. + +If you use a suspending data source, jpeg_read_coefficients() will return +NULL if it is forced to suspend; a non-NULL return value indicates successful +completion. You need not test for a NULL return value when using a +non-suspending data source. + +It is also possible to call jpeg_read_coefficients() to obtain access to the +decoder's coefficient arrays during a normal decode cycle in buffered-image +mode. This frammish might be useful for progressively displaying an incoming +image and then re-encoding it without loss. To do this, decode in buffered- +image mode as discussed previously, then call jpeg_read_coefficients() after +the last jpeg_finish_output() call. The arrays will be available for your use +until you call jpeg_finish_decompress(). + + +To write the contents of a JPEG file as DCT coefficients, you must provide +the DCT coefficients stored in virtual block arrays. You can either pass +block arrays read from an input JPEG file by jpeg_read_coefficients(), or +allocate virtual arrays from the JPEG compression object and fill them +yourself. In either case, jpeg_write_coefficients() is substituted for +jpeg_start_compress() and jpeg_write_scanlines(). Thus the sequence is + * Create compression object + * Set all compression parameters as necessary + * Request virtual arrays if needed + * jpeg_write_coefficients() + * jpeg_finish_compress() + * Destroy or re-use compression object +jpeg_write_coefficients() is passed a pointer to an array of virtual block +array descriptors; the number of arrays is equal to cinfo.num_components. + +The virtual arrays need only have been requested, not realized, before +jpeg_write_coefficients() is called. A side-effect of +jpeg_write_coefficients() is to realize any virtual arrays that have been +requested from the compression object's memory manager. Thus, when obtaining +the virtual arrays from the compression object, you should fill the arrays +after calling jpeg_write_coefficients(). The data is actually written out +when you call jpeg_finish_compress(); jpeg_write_coefficients() only writes +the file header. + +When writing raw DCT coefficients, it is crucial that the JPEG quantization +tables and sampling factors match the way the data was encoded, or the +resulting file will be invalid. For transcoding from an existing JPEG file, +we recommend using jpeg_copy_critical_parameters(). This routine initializes +all the compression parameters to default values (like jpeg_set_defaults()), +then copies the critical information from a source decompression object. +The decompression object should have just been used to read the entire +JPEG input file --- that is, it should be awaiting jpeg_finish_decompress(). + +jpeg_write_coefficients() marks all tables stored in the compression object +as needing to be written to the output file (thus, it acts like +jpeg_start_compress(cinfo, TRUE)). This is for safety's sake, to avoid +emitting abbreviated JPEG files by accident. If you really want to emit an +abbreviated JPEG file, call jpeg_suppress_tables(), or set the tables' +individual sent_table flags, between calling jpeg_write_coefficients() and +jpeg_finish_compress(). + + +Progress monitoring +------------------- + +Some applications may need to regain control from the JPEG library every so +often. The typical use of this feature is to produce a percent-done bar or +other progress display. (For a simple example, see cjpeg.c or djpeg.c.) +Although you do get control back frequently during the data-transferring pass +(the jpeg_read_scanlines or jpeg_write_scanlines loop), any additional passes +will occur inside jpeg_finish_compress or jpeg_start_decompress; those +routines may take a long time to execute, and you don't get control back +until they are done. + +You can define a progress-monitor routine which will be called periodically +by the library. No guarantees are made about how often this call will occur, +so we don't recommend you use it for mouse tracking or anything like that. +At present, a call will occur once per MCU row, scanline, or sample row +group, whichever unit is convenient for the current processing mode; so the +wider the image, the longer the time between calls. During the data +transferring pass, only one call occurs per call of jpeg_read_scanlines or +jpeg_write_scanlines, so don't pass a large number of scanlines at once if +you want fine resolution in the progress count. (If you really need to use +the callback mechanism for time-critical tasks like mouse tracking, you could +insert additional calls inside some of the library's inner loops.) + +To establish a progress-monitor callback, create a struct jpeg_progress_mgr, +fill in its progress_monitor field with a pointer to your callback routine, +and set cinfo->progress to point to the struct. The callback will be called +whenever cinfo->progress is non-NULL. (This pointer is set to NULL by +jpeg_create_compress or jpeg_create_decompress; the library will not change +it thereafter. So if you allocate dynamic storage for the progress struct, +make sure it will live as long as the JPEG object does. Allocating from the +JPEG memory manager with lifetime JPOOL_PERMANENT will work nicely.) You +can use the same callback routine for both compression and decompression. + +The jpeg_progress_mgr struct contains four fields which are set by the library: + long pass_counter; /* work units completed in this pass */ + long pass_limit; /* total number of work units in this pass */ + int completed_passes; /* passes completed so far */ + int total_passes; /* total number of passes expected */ +During any one pass, pass_counter increases from 0 up to (not including) +pass_limit; the step size is usually but not necessarily 1. The pass_limit +value may change from one pass to another. The expected total number of +passes is in total_passes, and the number of passes already completed is in +completed_passes. Thus the fraction of work completed may be estimated as + completed_passes + (pass_counter/pass_limit) + -------------------------------------------- + total_passes +ignoring the fact that the passes may not be equal amounts of work. + +When decompressing, pass_limit can even change within a pass, because it +depends on the number of scans in the JPEG file, which isn't always known in +advance. The computed fraction-of-work-done may jump suddenly (if the library +discovers it has overestimated the number of scans) or even decrease (in the +opposite case). It is not wise to put great faith in the work estimate. + +When using the decompressor's buffered-image mode, the progress monitor work +estimate is likely to be completely unhelpful, because the library has no way +to know how many output passes will be demanded of it. Currently, the library +sets total_passes based on the assumption that there will be one more output +pass if the input file end hasn't yet been read (jpeg_input_complete() isn't +TRUE), but no more output passes if the file end has been reached when the +output pass is started. This means that total_passes will rise as additional +output passes are requested. If you have a way of determining the input file +size, estimating progress based on the fraction of the file that's been read +will probably be more useful than using the library's value. + + +Memory management +----------------- + +This section covers some key facts about the JPEG library's built-in memory +manager. For more info, please read structure.txt's section about the memory +manager, and consult the source code if necessary. + +All memory and temporary file allocation within the library is done via the +memory manager. If necessary, you can replace the "back end" of the memory +manager to control allocation yourself (for example, if you don't want the +library to use malloc() and free() for some reason). + +Some data is allocated "permanently" and will not be freed until the JPEG +object is destroyed. Most data is allocated "per image" and is freed by +jpeg_finish_compress, jpeg_finish_decompress, or jpeg_abort. You can call the +memory manager yourself to allocate structures that will automatically be +freed at these times. Typical code for this is + ptr = (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, size); +Use JPOOL_PERMANENT to get storage that lasts as long as the JPEG object. +Use alloc_large instead of alloc_small for anything bigger than a few Kbytes. +There are also alloc_sarray and alloc_barray routines that automatically +build 2-D sample or block arrays. + +The library's minimum space requirements to process an image depend on the +image's width, but not on its height, because the library ordinarily works +with "strip" buffers that are as wide as the image but just a few rows high. +Some operating modes (eg, two-pass color quantization) require full-image +buffers. Such buffers are treated as "virtual arrays": only the current strip +need be in memory, and the rest can be swapped out to a temporary file. + +If you use the simplest memory manager back end (jmemnobs.c), then no +temporary files are used; virtual arrays are simply malloc()'d. Images bigger +than memory can be processed only if your system supports virtual memory. +The other memory manager back ends support temporary files of various flavors +and thus work in machines without virtual memory. They may also be useful on +Unix machines if you need to process images that exceed available swap space. + +When using temporary files, the library will make the in-memory buffers for +its virtual arrays just big enough to stay within a "maximum memory" setting. +Your application can set this limit by setting cinfo->mem->max_memory_to_use +after creating the JPEG object. (Of course, there is still a minimum size for +the buffers, so the max-memory setting is effective only if it is bigger than +the minimum space needed.) If you allocate any large structures yourself, you +must allocate them before jpeg_start_compress() or jpeg_start_decompress() in +order to have them counted against the max memory limit. Also keep in mind +that space allocated with alloc_small() is ignored, on the assumption that +it's too small to be worth worrying about; so a reasonable safety margin +should be left when setting max_memory_to_use. + +If you use the jmemname.c or jmemdos.c memory manager back end, it is +important to clean up the JPEG object properly to ensure that the temporary +files get deleted. (This is especially crucial with jmemdos.c, where the +"temporary files" may be extended-memory segments; if they are not freed, +DOS will require a reboot to recover the memory.) Thus, with these memory +managers, it's a good idea to provide a signal handler that will trap any +early exit from your program. The handler should call either jpeg_abort() +or jpeg_destroy() for any active JPEG objects. A handler is not needed with +jmemnobs.c, and shouldn't be necessary with jmemansi.c or jmemmac.c either, +since the C library is supposed to take care of deleting files made with +tmpfile(). + + +Memory usage +------------ + +Working memory requirements while performing compression or decompression +depend on image dimensions, image characteristics (such as colorspace and +JPEG process), and operating mode (application-selected options). + +As of v6b, the decompressor requires: + 1. About 24K in more-or-less-fixed-size data. This varies a bit depending + on operating mode and image characteristics (particularly color vs. + grayscale), but it doesn't depend on image dimensions. + 2. Strip buffers (of size proportional to the image width) for IDCT and + upsampling results. The worst case for commonly used sampling factors + is about 34 bytes * width in pixels for a color image. A grayscale image + only needs about 8 bytes per pixel column. + 3. A full-image DCT coefficient buffer is needed to decode a multi-scan JPEG + file (including progressive JPEGs), or whenever you select buffered-image + mode. This takes 2 bytes/coefficient. At typical 2x2 sampling, that's + 3 bytes per pixel for a color image. Worst case (1x1 sampling) requires + 6 bytes/pixel. For grayscale, figure 2 bytes/pixel. + 4. To perform 2-pass color quantization, the decompressor also needs a + 128K color lookup table and a full-image pixel buffer (3 bytes/pixel). +This does not count any memory allocated by the application, such as a +buffer to hold the final output image. + +The above figures are valid for 8-bit JPEG data precision and a machine with +32-bit ints. For 9-bit to 12-bit JPEG data, double the size of the strip +buffers and quantization pixel buffer. The "fixed-size" data will be +somewhat smaller with 16-bit ints, larger with 64-bit ints. Also, CMYK +or other unusual color spaces will require different amounts of space. + +The full-image coefficient and pixel buffers, if needed at all, do not +have to be fully RAM resident; you can have the library use temporary +files instead when the total memory usage would exceed a limit you set. +(But if your OS supports virtual memory, it's probably better to just use +jmemnobs and let the OS do the swapping.) + +The compressor's memory requirements are similar, except that it has no need +for color quantization. Also, it needs a full-image DCT coefficient buffer +if Huffman-table optimization is asked for, even if progressive mode is not +requested. + +If you need more detailed information about memory usage in a particular +situation, you can enable the MEM_STATS code in jmemmgr.c. + + +Library compile-time options +---------------------------- + +A number of compile-time options are available by modifying jmorecfg.h. + +The IJG code currently supports 8-bit to 12-bit sample data precision by +defining BITS_IN_JSAMPLE as 8, 9, 10, 11, or 12. +Note that a value larger than 8 causes JSAMPLE to be larger than a char, +so it affects the surrounding application's image data. +The sample applications cjpeg and djpeg can support deeper than 8-bit data +only for PPM and GIF file formats; you must disable the other file formats +to compile a 9-bit to 12-bit cjpeg or djpeg. (install.txt has more +information about that.) +Run-time selection and conversion of data precision are currently not +supported and may be added later. +Exception: The transcoding part (jpegtran) supports all settings in a +single instance, since it operates on the level of DCT coefficients and +not sample values. +(If you need to include an 8-bit library and a 9-bit to 12-bit library for +compression or decompression in a single application, you could probably do +it by defining NEED_SHORT_EXTERNAL_NAMES for just one of the copies. You'd +have to access the 8-bit and the 9-bit to 12-bit copies from separate +application source files. This is untested ... if you try it, we'd like to +hear whether it works!) + +Note that the standard Huffman tables are only valid for 8-bit data precision. +If you selected more than 8-bit data precision, cjpeg uses arithmetic coding +by default. The Huffman encoder normally uses entropy optimization to +compute usable tables for higher precision. Otherwise, you'll have to +supply different default Huffman tables. You may also want to supply your +own DCT quantization tables; the existing quality-scaling code has been +developed for 8-bit use, and probably doesn't generate especially good tables +for 9-bit to 12-bit. + +The maximum number of components (color channels) in the image is determined +by MAX_COMPONENTS. The JPEG standard allows up to 255 components, but we +expect that few applications will need more than four or so. + +On machines with unusual data type sizes, you may be able to improve +performance or reduce memory space by tweaking the various typedefs in +jmorecfg.h. In particular, on some RISC CPUs, access to arrays of "short"s +is quite slow; consider trading memory for speed by making JCOEF, INT16, and +UINT16 be "int" or "unsigned int". UINT8 is also a candidate to become int. +You probably don't want to make JSAMPLE be int unless you have lots of memory +to burn. + +You can reduce the size of the library by compiling out various optional +functions. To do this, undefine xxx_SUPPORTED symbols as necessary. + +You can also save a few K by not having text error messages in the library; +the standard error message table occupies about 5Kb. This is particularly +reasonable for embedded applications where there's no good way to display +a message anyway. To do this, remove the creation of the message table +(jpeg_std_message_table[]) from jerror.c, and alter format_message to do +something reasonable without it. You could output the numeric value of the +message code number, for example. If you do this, you can also save a couple +more K by modifying the TRACEMSn() macros in jerror.h to expand to nothing; +you don't need trace capability anyway, right? + + +Portability considerations +-------------------------- + +The JPEG library has been written to be extremely portable; the sample +applications cjpeg and djpeg are slightly less so. This section summarizes +the design goals in this area. (If you encounter any bugs that cause the +library to be less portable than is claimed here, we'd appreciate hearing +about them.) + +The code works fine on ANSI C, C++, and pre-ANSI C compilers, using any of +the popular system include file setups, and some not-so-popular ones too. +See install.txt for configuration procedures. + +The code is not dependent on the exact sizes of the C data types. As +distributed, we make the assumptions that + char is at least 8 bits wide + short is at least 16 bits wide + int is at least 16 bits wide + long is at least 32 bits wide +(These are the minimum requirements of the ANSI C standard.) Wider types will +work fine, although memory may be used inefficiently if char is much larger +than 8 bits or short is much bigger than 16 bits. The code should work +equally well with 16- or 32-bit ints. + +In a system where these assumptions are not met, you may be able to make the +code work by modifying the typedefs in jmorecfg.h. However, you will probably +have difficulty if int is less than 16 bits wide, since references to plain +int abound in the code. + +char can be either signed or unsigned, although the code runs faster if an +unsigned char type is available. If char is wider than 8 bits, you will need +to redefine JOCTET and/or provide custom data source/destination managers so +that JOCTET represents exactly 8 bits of data on external storage. + +The JPEG library proper does not assume ASCII representation of characters. +But some of the image file I/O modules in cjpeg/djpeg do have ASCII +dependencies in file-header manipulation; so does cjpeg's select_file_type() +routine. + +The JPEG library does not rely heavily on the C library. In particular, C +stdio is used only by the data source/destination modules and the error +handler, all of which are application-replaceable. (cjpeg/djpeg are more +heavily dependent on stdio.) malloc and free are called only from the memory +manager "back end" module, so you can use a different memory allocator by +replacing that one file. + +The code generally assumes that C names must be unique in the first 15 +characters. However, global function names can be made unique in the +first 6 characters by defining NEED_SHORT_EXTERNAL_NAMES. + +More info about porting the code may be gleaned by reading jconfig.txt, +jmorecfg.h, and jinclude.h. + + +Notes for MS-DOS implementors +----------------------------- + +The IJG code is designed to work efficiently in 80x86 "small" or "medium" +memory models (i.e., data pointers are 16 bits unless explicitly declared +"far"; code pointers can be either size). You may be able to use small +model to compile cjpeg or djpeg by itself, but you will probably have to use +medium model for any larger application. This won't make much difference in +performance. You *will* take a noticeable performance hit if you use a +large-data memory model (perhaps 10%-25%), and you should avoid "huge" model +if at all possible. + +The JPEG library typically needs 2Kb-3Kb of stack space. It will also +malloc about 20K-30K of near heap space while executing (and lots of far +heap, but that doesn't count in this calculation). This figure will vary +depending on selected operating mode, and to a lesser extent on image size. +There is also about 5Kb-6Kb of constant data which will be allocated in the +near data segment (about 4Kb of this is the error message table). +Thus you have perhaps 20K available for other modules' static data and near +heap space before you need to go to a larger memory model. The C library's +static data will account for several K of this, but that still leaves a good +deal for your needs. (If you are tight on space, you could reduce the sizes +of the I/O buffers allocated by jdatasrc.c and jdatadst.c, say from 4K to +1K. Another possibility is to move the error message table to far memory; +this should be doable with only localized hacking on jerror.c.) + +About 2K of the near heap space is "permanent" memory that will not be +released until you destroy the JPEG object. This is only an issue if you +save a JPEG object between compression or decompression operations. + +Far data space may also be a tight resource when you are dealing with large +images. The most memory-intensive case is decompression with two-pass color +quantization, or single-pass quantization to an externally supplied color +map. This requires a 128Kb color lookup table plus strip buffers amounting +to about 40 bytes per column for typical sampling ratios (eg, about 25600 +bytes for a 640-pixel-wide image). You may not be able to process wide +images if you have large data structures of your own. + +Of course, all of these concerns vanish if you use a 32-bit flat-memory-model +compiler, such as DJGPP or Watcom C. We highly recommend flat model if you +can use it; the JPEG library is significantly faster in flat model. diff --git a/compat/libjpeg/ltmain.sh b/compat/libjpeg/ltmain.sh new file mode 100755 index 0000000..0f0a2da --- /dev/null +++ b/compat/libjpeg/ltmain.sh @@ -0,0 +1,11147 @@ +#! /bin/sh +## DO NOT EDIT - This file generated from ./build-aux/ltmain.in +## by inline-source v2014-01-03.01 + +# libtool (GNU libtool) 2.4.6 +# Provide generalized library-building support services. +# Written by Gordon Matzigkeit , 1996 + +# Copyright (C) 1996-2015 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# GNU Libtool is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + + +PROGRAM=libtool +PACKAGE=libtool +VERSION=2.4.6 +package_revision=2.4.6 + + +## ------ ## +## Usage. ## +## ------ ## + +# Run './libtool --help' for help with using this script from the +# command line. + + +## ------------------------------- ## +## User overridable command paths. ## +## ------------------------------- ## + +# After configure completes, it has a better idea of some of the +# shell tools we need than the defaults used by the functions shared +# with bootstrap, so set those here where they can still be over- +# ridden by the user, but otherwise take precedence. + +: ${AUTOCONF="autoconf"} +: ${AUTOMAKE="automake"} + + +## -------------------------- ## +## Source external libraries. ## +## -------------------------- ## + +# Much of our low-level functionality needs to be sourced from external +# libraries, which are installed to $pkgauxdir. + +# Set a version string for this script. +scriptversion=2015-01-20.17; # UTC + +# General shell script boiler plate, and helper functions. +# Written by Gary V. Vaughan, 2004 + +# Copyright (C) 2004-2015 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. + +# As a special exception to the GNU General Public License, if you distribute +# this file as part of a program or library that is built using GNU Libtool, +# you may include this file under the same distribution terms that you use +# for the rest of that program. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNES FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# Please report bugs or propose patches to gary@gnu.org. + + +## ------ ## +## Usage. ## +## ------ ## + +# Evaluate this file near the top of your script to gain access to +# the functions and variables defined here: +# +# . `echo "$0" | ${SED-sed} 's|[^/]*$||'`/build-aux/funclib.sh +# +# If you need to override any of the default environment variable +# settings, do that before evaluating this file. + + +## -------------------- ## +## Shell normalisation. ## +## -------------------- ## + +# Some shells need a little help to be as Bourne compatible as possible. +# Before doing anything else, make sure all that help has been provided! + +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac +fi + +# NLS nuisances: We save the old values in case they are required later. +_G_user_locale= +_G_safe_locale= +for _G_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES +do + eval "if test set = \"\${$_G_var+set}\"; then + save_$_G_var=\$$_G_var + $_G_var=C + export $_G_var + _G_user_locale=\"$_G_var=\\\$save_\$_G_var; \$_G_user_locale\" + _G_safe_locale=\"$_G_var=C; \$_G_safe_locale\" + fi" +done + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +# Make sure IFS has a sensible default +sp=' ' +nl=' +' +IFS="$sp $nl" + +# There are apparently some retarded systems that use ';' as a PATH separator! +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + + +## ------------------------- ## +## Locate command utilities. ## +## ------------------------- ## + + +# func_executable_p FILE +# ---------------------- +# Check that FILE is an executable regular file. +func_executable_p () +{ + test -f "$1" && test -x "$1" +} + + +# func_path_progs PROGS_LIST CHECK_FUNC [PATH] +# -------------------------------------------- +# Search for either a program that responds to --version with output +# containing "GNU", or else returned by CHECK_FUNC otherwise, by +# trying all the directories in PATH with each of the elements of +# PROGS_LIST. +# +# CHECK_FUNC should accept the path to a candidate program, and +# set $func_check_prog_result if it truncates its output less than +# $_G_path_prog_max characters. +func_path_progs () +{ + _G_progs_list=$1 + _G_check_func=$2 + _G_PATH=${3-"$PATH"} + + _G_path_prog_max=0 + _G_path_prog_found=false + _G_save_IFS=$IFS; IFS=${PATH_SEPARATOR-:} + for _G_dir in $_G_PATH; do + IFS=$_G_save_IFS + test -z "$_G_dir" && _G_dir=. + for _G_prog_name in $_G_progs_list; do + for _exeext in '' .EXE; do + _G_path_prog=$_G_dir/$_G_prog_name$_exeext + func_executable_p "$_G_path_prog" || continue + case `"$_G_path_prog" --version 2>&1` in + *GNU*) func_path_progs_result=$_G_path_prog _G_path_prog_found=: ;; + *) $_G_check_func $_G_path_prog + func_path_progs_result=$func_check_prog_result + ;; + esac + $_G_path_prog_found && break 3 + done + done + done + IFS=$_G_save_IFS + test -z "$func_path_progs_result" && { + echo "no acceptable sed could be found in \$PATH" >&2 + exit 1 + } +} + + +# We want to be able to use the functions in this file before configure +# has figured out where the best binaries are kept, which means we have +# to search for them ourselves - except when the results are already set +# where we skip the searches. + +# Unless the user overrides by setting SED, search the path for either GNU +# sed, or the sed that truncates its output the least. +test -z "$SED" && { + _G_sed_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ + for _G_i in 1 2 3 4 5 6 7; do + _G_sed_script=$_G_sed_script$nl$_G_sed_script + done + echo "$_G_sed_script" 2>/dev/null | sed 99q >conftest.sed + _G_sed_script= + + func_check_prog_sed () + { + _G_path_prog=$1 + + _G_count=0 + printf 0123456789 >conftest.in + while : + do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo '' >> conftest.nl + "$_G_path_prog" -f conftest.sed conftest.out 2>/dev/null || break + diff conftest.out conftest.nl >/dev/null 2>&1 || break + _G_count=`expr $_G_count + 1` + if test "$_G_count" -gt "$_G_path_prog_max"; then + # Best one so far, save it but keep looking for a better one + func_check_prog_result=$_G_path_prog + _G_path_prog_max=$_G_count + fi + # 10*(2^10) chars as input seems more than enough + test 10 -lt "$_G_count" && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out + } + + func_path_progs "sed gsed" func_check_prog_sed $PATH:/usr/xpg4/bin + rm -f conftest.sed + SED=$func_path_progs_result +} + + +# Unless the user overrides by setting GREP, search the path for either GNU +# grep, or the grep that truncates its output the least. +test -z "$GREP" && { + func_check_prog_grep () + { + _G_path_prog=$1 + + _G_count=0 + _G_path_prog_max=0 + printf 0123456789 >conftest.in + while : + do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo 'GREP' >> conftest.nl + "$_G_path_prog" -e 'GREP$' -e '-(cannot match)-' conftest.out 2>/dev/null || break + diff conftest.out conftest.nl >/dev/null 2>&1 || break + _G_count=`expr $_G_count + 1` + if test "$_G_count" -gt "$_G_path_prog_max"; then + # Best one so far, save it but keep looking for a better one + func_check_prog_result=$_G_path_prog + _G_path_prog_max=$_G_count + fi + # 10*(2^10) chars as input seems more than enough + test 10 -lt "$_G_count" && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out + } + + func_path_progs "grep ggrep" func_check_prog_grep $PATH:/usr/xpg4/bin + GREP=$func_path_progs_result +} + + +## ------------------------------- ## +## User overridable command paths. ## +## ------------------------------- ## + +# All uppercase variable names are used for environment variables. These +# variables can be overridden by the user before calling a script that +# uses them if a suitable command of that name is not already available +# in the command search PATH. + +: ${CP="cp -f"} +: ${ECHO="printf %s\n"} +: ${EGREP="$GREP -E"} +: ${FGREP="$GREP -F"} +: ${LN_S="ln -s"} +: ${MAKE="make"} +: ${MKDIR="mkdir"} +: ${MV="mv -f"} +: ${RM="rm -f"} +: ${SHELL="${CONFIG_SHELL-/bin/sh}"} + + +## -------------------- ## +## Useful sed snippets. ## +## -------------------- ## + +sed_dirname='s|/[^/]*$||' +sed_basename='s|^.*/||' + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +sed_quote_subst='s|\([`"$\\]\)|\\\1|g' + +# Same as above, but do not quote variable references. +sed_double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Sed substitution that turns a string into a regex matching for the +# string literally. +sed_make_literal_regex='s|[].[^$\\*\/]|\\&|g' + +# Sed substitution that converts a w32 file name or path +# that contains forward slashes, into one that contains +# (escaped) backslashes. A very naive implementation. +sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' + +# Re-'\' parameter expansions in output of sed_double_quote_subst that +# were '\'-ed in input to the same. If an odd number of '\' preceded a +# '$' in input to sed_double_quote_subst, that '$' was protected from +# expansion. Since each input '\' is now two '\'s, look for any number +# of runs of four '\'s followed by two '\'s and then a '$'. '\' that '$'. +_G_bs='\\' +_G_bs2='\\\\' +_G_bs4='\\\\\\\\' +_G_dollar='\$' +sed_double_backslash="\ + s/$_G_bs4/&\\ +/g + s/^$_G_bs2$_G_dollar/$_G_bs&/ + s/\\([^$_G_bs]\\)$_G_bs2$_G_dollar/\\1$_G_bs2$_G_bs$_G_dollar/g + s/\n//g" + + +## ----------------- ## +## Global variables. ## +## ----------------- ## + +# Except for the global variables explicitly listed below, the following +# functions in the '^func_' namespace, and the '^require_' namespace +# variables initialised in the 'Resource management' section, sourcing +# this file will not pollute your global namespace with anything +# else. There's no portable way to scope variables in Bourne shell +# though, so actually running these functions will sometimes place +# results into a variable named after the function, and often use +# temporary variables in the '^_G_' namespace. If you are careful to +# avoid using those namespaces casually in your sourcing script, things +# should continue to work as you expect. And, of course, you can freely +# overwrite any of the functions or variables defined here before +# calling anything to customize them. + +EXIT_SUCCESS=0 +EXIT_FAILURE=1 +EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. +EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. + +# Allow overriding, eg assuming that you follow the convention of +# putting '$debug_cmd' at the start of all your functions, you can get +# bash to show function call trace with: +# +# debug_cmd='eval echo "${FUNCNAME[0]} $*" >&2' bash your-script-name +debug_cmd=${debug_cmd-":"} +exit_cmd=: + +# By convention, finish your script with: +# +# exit $exit_status +# +# so that you can set exit_status to non-zero if you want to indicate +# something went wrong during execution without actually bailing out at +# the point of failure. +exit_status=$EXIT_SUCCESS + +# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh +# is ksh but when the shell is invoked as "sh" and the current value of +# the _XPG environment variable is not equal to 1 (one), the special +# positional parameter $0, within a function call, is the name of the +# function. +progpath=$0 + +# The name of this program. +progname=`$ECHO "$progpath" |$SED "$sed_basename"` + +# Make sure we have an absolute progpath for reexecution: +case $progpath in + [\\/]*|[A-Za-z]:\\*) ;; + *[\\/]*) + progdir=`$ECHO "$progpath" |$SED "$sed_dirname"` + progdir=`cd "$progdir" && pwd` + progpath=$progdir/$progname + ;; + *) + _G_IFS=$IFS + IFS=${PATH_SEPARATOR-:} + for progdir in $PATH; do + IFS=$_G_IFS + test -x "$progdir/$progname" && break + done + IFS=$_G_IFS + test -n "$progdir" || progdir=`pwd` + progpath=$progdir/$progname + ;; +esac + + +## ----------------- ## +## Standard options. ## +## ----------------- ## + +# The following options affect the operation of the functions defined +# below, and should be set appropriately depending on run-time para- +# meters passed on the command line. + +opt_dry_run=false +opt_quiet=false +opt_verbose=false + +# Categories 'all' and 'none' are always available. Append any others +# you will pass as the first argument to func_warning from your own +# code. +warning_categories= + +# By default, display warnings according to 'opt_warning_types'. Set +# 'warning_func' to ':' to elide all warnings, or func_fatal_error to +# treat the next displayed warning as a fatal error. +warning_func=func_warn_and_continue + +# Set to 'all' to display all warnings, 'none' to suppress all +# warnings, or a space delimited list of some subset of +# 'warning_categories' to display only the listed warnings. +opt_warning_types=all + + +## -------------------- ## +## Resource management. ## +## -------------------- ## + +# This section contains definitions for functions that each ensure a +# particular resource (a file, or a non-empty configuration variable for +# example) is available, and if appropriate to extract default values +# from pertinent package files. Call them using their associated +# 'require_*' variable to ensure that they are executed, at most, once. +# +# It's entirely deliberate that calling these functions can set +# variables that don't obey the namespace limitations obeyed by the rest +# of this file, in order that that they be as useful as possible to +# callers. + + +# require_term_colors +# ------------------- +# Allow display of bold text on terminals that support it. +require_term_colors=func_require_term_colors +func_require_term_colors () +{ + $debug_cmd + + test -t 1 && { + # COLORTERM and USE_ANSI_COLORS environment variables take + # precedence, because most terminfo databases neglect to describe + # whether color sequences are supported. + test -n "${COLORTERM+set}" && : ${USE_ANSI_COLORS="1"} + + if test 1 = "$USE_ANSI_COLORS"; then + # Standard ANSI escape sequences + tc_reset='' + tc_bold=''; tc_standout='' + tc_red=''; tc_green='' + tc_blue=''; tc_cyan='' + else + # Otherwise trust the terminfo database after all. + test -n "`tput sgr0 2>/dev/null`" && { + tc_reset=`tput sgr0` + test -n "`tput bold 2>/dev/null`" && tc_bold=`tput bold` + tc_standout=$tc_bold + test -n "`tput smso 2>/dev/null`" && tc_standout=`tput smso` + test -n "`tput setaf 1 2>/dev/null`" && tc_red=`tput setaf 1` + test -n "`tput setaf 2 2>/dev/null`" && tc_green=`tput setaf 2` + test -n "`tput setaf 4 2>/dev/null`" && tc_blue=`tput setaf 4` + test -n "`tput setaf 5 2>/dev/null`" && tc_cyan=`tput setaf 5` + } + fi + } + + require_term_colors=: +} + + +## ----------------- ## +## Function library. ## +## ----------------- ## + +# This section contains a variety of useful functions to call in your +# scripts. Take note of the portable wrappers for features provided by +# some modern shells, which will fall back to slower equivalents on +# less featureful shells. + + +# func_append VAR VALUE +# --------------------- +# Append VALUE onto the existing contents of VAR. + + # We should try to minimise forks, especially on Windows where they are + # unreasonably slow, so skip the feature probes when bash or zsh are + # being used: + if test set = "${BASH_VERSION+set}${ZSH_VERSION+set}"; then + : ${_G_HAVE_ARITH_OP="yes"} + : ${_G_HAVE_XSI_OPS="yes"} + # The += operator was introduced in bash 3.1 + case $BASH_VERSION in + [12].* | 3.0 | 3.0*) ;; + *) + : ${_G_HAVE_PLUSEQ_OP="yes"} + ;; + esac + fi + + # _G_HAVE_PLUSEQ_OP + # Can be empty, in which case the shell is probed, "yes" if += is + # useable or anything else if it does not work. + test -z "$_G_HAVE_PLUSEQ_OP" \ + && (eval 'x=a; x+=" b"; test "a b" = "$x"') 2>/dev/null \ + && _G_HAVE_PLUSEQ_OP=yes + +if test yes = "$_G_HAVE_PLUSEQ_OP" +then + # This is an XSI compatible shell, allowing a faster implementation... + eval 'func_append () + { + $debug_cmd + + eval "$1+=\$2" + }' +else + # ...otherwise fall back to using expr, which is often a shell builtin. + func_append () + { + $debug_cmd + + eval "$1=\$$1\$2" + } +fi + + +# func_append_quoted VAR VALUE +# ---------------------------- +# Quote VALUE and append to the end of shell variable VAR, separated +# by a space. +if test yes = "$_G_HAVE_PLUSEQ_OP"; then + eval 'func_append_quoted () + { + $debug_cmd + + func_quote_for_eval "$2" + eval "$1+=\\ \$func_quote_for_eval_result" + }' +else + func_append_quoted () + { + $debug_cmd + + func_quote_for_eval "$2" + eval "$1=\$$1\\ \$func_quote_for_eval_result" + } +fi + + +# func_append_uniq VAR VALUE +# -------------------------- +# Append unique VALUE onto the existing contents of VAR, assuming +# entries are delimited by the first character of VALUE. For example: +# +# func_append_uniq options " --another-option option-argument" +# +# will only append to $options if " --another-option option-argument " +# is not already present somewhere in $options already (note spaces at +# each end implied by leading space in second argument). +func_append_uniq () +{ + $debug_cmd + + eval _G_current_value='`$ECHO $'$1'`' + _G_delim=`expr "$2" : '\(.\)'` + + case $_G_delim$_G_current_value$_G_delim in + *"$2$_G_delim"*) ;; + *) func_append "$@" ;; + esac +} + + +# func_arith TERM... +# ------------------ +# Set func_arith_result to the result of evaluating TERMs. + test -z "$_G_HAVE_ARITH_OP" \ + && (eval 'test 2 = $(( 1 + 1 ))') 2>/dev/null \ + && _G_HAVE_ARITH_OP=yes + +if test yes = "$_G_HAVE_ARITH_OP"; then + eval 'func_arith () + { + $debug_cmd + + func_arith_result=$(( $* )) + }' +else + func_arith () + { + $debug_cmd + + func_arith_result=`expr "$@"` + } +fi + + +# func_basename FILE +# ------------------ +# Set func_basename_result to FILE with everything up to and including +# the last / stripped. +if test yes = "$_G_HAVE_XSI_OPS"; then + # If this shell supports suffix pattern removal, then use it to avoid + # forking. Hide the definitions single quotes in case the shell chokes + # on unsupported syntax... + _b='func_basename_result=${1##*/}' + _d='case $1 in + */*) func_dirname_result=${1%/*}$2 ;; + * ) func_dirname_result=$3 ;; + esac' + +else + # ...otherwise fall back to using sed. + _b='func_basename_result=`$ECHO "$1" |$SED "$sed_basename"`' + _d='func_dirname_result=`$ECHO "$1" |$SED "$sed_dirname"` + if test "X$func_dirname_result" = "X$1"; then + func_dirname_result=$3 + else + func_append func_dirname_result "$2" + fi' +fi + +eval 'func_basename () +{ + $debug_cmd + + '"$_b"' +}' + + +# func_dirname FILE APPEND NONDIR_REPLACEMENT +# ------------------------------------------- +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +eval 'func_dirname () +{ + $debug_cmd + + '"$_d"' +}' + + +# func_dirname_and_basename FILE APPEND NONDIR_REPLACEMENT +# -------------------------------------------------------- +# Perform func_basename and func_dirname in a single function +# call: +# dirname: Compute the dirname of FILE. If nonempty, +# add APPEND to the result, otherwise set result +# to NONDIR_REPLACEMENT. +# value returned in "$func_dirname_result" +# basename: Compute filename of FILE. +# value retuned in "$func_basename_result" +# For efficiency, we do not delegate to the functions above but instead +# duplicate the functionality here. +eval 'func_dirname_and_basename () +{ + $debug_cmd + + '"$_b"' + '"$_d"' +}' + + +# func_echo ARG... +# ---------------- +# Echo program name prefixed message. +func_echo () +{ + $debug_cmd + + _G_message=$* + + func_echo_IFS=$IFS + IFS=$nl + for _G_line in $_G_message; do + IFS=$func_echo_IFS + $ECHO "$progname: $_G_line" + done + IFS=$func_echo_IFS +} + + +# func_echo_all ARG... +# -------------------- +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "$*" +} + + +# func_echo_infix_1 INFIX ARG... +# ------------------------------ +# Echo program name, followed by INFIX on the first line, with any +# additional lines not showing INFIX. +func_echo_infix_1 () +{ + $debug_cmd + + $require_term_colors + + _G_infix=$1; shift + _G_indent=$_G_infix + _G_prefix="$progname: $_G_infix: " + _G_message=$* + + # Strip color escape sequences before counting printable length + for _G_tc in "$tc_reset" "$tc_bold" "$tc_standout" "$tc_red" "$tc_green" "$tc_blue" "$tc_cyan" + do + test -n "$_G_tc" && { + _G_esc_tc=`$ECHO "$_G_tc" | $SED "$sed_make_literal_regex"` + _G_indent=`$ECHO "$_G_indent" | $SED "s|$_G_esc_tc||g"` + } + done + _G_indent="$progname: "`echo "$_G_indent" | $SED 's|.| |g'`" " ## exclude from sc_prohibit_nested_quotes + + func_echo_infix_1_IFS=$IFS + IFS=$nl + for _G_line in $_G_message; do + IFS=$func_echo_infix_1_IFS + $ECHO "$_G_prefix$tc_bold$_G_line$tc_reset" >&2 + _G_prefix=$_G_indent + done + IFS=$func_echo_infix_1_IFS +} + + +# func_error ARG... +# ----------------- +# Echo program name prefixed message to standard error. +func_error () +{ + $debug_cmd + + $require_term_colors + + func_echo_infix_1 " $tc_standout${tc_red}error$tc_reset" "$*" >&2 +} + + +# func_fatal_error ARG... +# ----------------------- +# Echo program name prefixed message to standard error, and exit. +func_fatal_error () +{ + $debug_cmd + + func_error "$*" + exit $EXIT_FAILURE +} + + +# func_grep EXPRESSION FILENAME +# ----------------------------- +# Check whether EXPRESSION matches any line of FILENAME, without output. +func_grep () +{ + $debug_cmd + + $GREP "$1" "$2" >/dev/null 2>&1 +} + + +# func_len STRING +# --------------- +# Set func_len_result to the length of STRING. STRING may not +# start with a hyphen. + test -z "$_G_HAVE_XSI_OPS" \ + && (eval 'x=a/b/c; + test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \ + && _G_HAVE_XSI_OPS=yes + +if test yes = "$_G_HAVE_XSI_OPS"; then + eval 'func_len () + { + $debug_cmd + + func_len_result=${#1} + }' +else + func_len () + { + $debug_cmd + + func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` + } +fi + + +# func_mkdir_p DIRECTORY-PATH +# --------------------------- +# Make sure the entire path to DIRECTORY-PATH is available. +func_mkdir_p () +{ + $debug_cmd + + _G_directory_path=$1 + _G_dir_list= + + if test -n "$_G_directory_path" && test : != "$opt_dry_run"; then + + # Protect directory names starting with '-' + case $_G_directory_path in + -*) _G_directory_path=./$_G_directory_path ;; + esac + + # While some portion of DIR does not yet exist... + while test ! -d "$_G_directory_path"; do + # ...make a list in topmost first order. Use a colon delimited + # list incase some portion of path contains whitespace. + _G_dir_list=$_G_directory_path:$_G_dir_list + + # If the last portion added has no slash in it, the list is done + case $_G_directory_path in */*) ;; *) break ;; esac + + # ...otherwise throw away the child directory and loop + _G_directory_path=`$ECHO "$_G_directory_path" | $SED -e "$sed_dirname"` + done + _G_dir_list=`$ECHO "$_G_dir_list" | $SED 's|:*$||'` + + func_mkdir_p_IFS=$IFS; IFS=: + for _G_dir in $_G_dir_list; do + IFS=$func_mkdir_p_IFS + # mkdir can fail with a 'File exist' error if two processes + # try to create one of the directories concurrently. Don't + # stop in that case! + $MKDIR "$_G_dir" 2>/dev/null || : + done + IFS=$func_mkdir_p_IFS + + # Bail out if we (or some other process) failed to create a directory. + test -d "$_G_directory_path" || \ + func_fatal_error "Failed to create '$1'" + fi +} + + +# func_mktempdir [BASENAME] +# ------------------------- +# Make a temporary directory that won't clash with other running +# libtool processes, and avoids race conditions if possible. If +# given, BASENAME is the basename for that directory. +func_mktempdir () +{ + $debug_cmd + + _G_template=${TMPDIR-/tmp}/${1-$progname} + + if test : = "$opt_dry_run"; then + # Return a directory name, but don't create it in dry-run mode + _G_tmpdir=$_G_template-$$ + else + + # If mktemp works, use that first and foremost + _G_tmpdir=`mktemp -d "$_G_template-XXXXXXXX" 2>/dev/null` + + if test ! -d "$_G_tmpdir"; then + # Failing that, at least try and use $RANDOM to avoid a race + _G_tmpdir=$_G_template-${RANDOM-0}$$ + + func_mktempdir_umask=`umask` + umask 0077 + $MKDIR "$_G_tmpdir" + umask $func_mktempdir_umask + fi + + # If we're not in dry-run mode, bomb out on failure + test -d "$_G_tmpdir" || \ + func_fatal_error "cannot create temporary directory '$_G_tmpdir'" + fi + + $ECHO "$_G_tmpdir" +} + + +# func_normal_abspath PATH +# ------------------------ +# Remove doubled-up and trailing slashes, "." path components, +# and cancel out any ".." path components in PATH after making +# it an absolute path. +func_normal_abspath () +{ + $debug_cmd + + # These SED scripts presuppose an absolute path with a trailing slash. + _G_pathcar='s|^/\([^/]*\).*$|\1|' + _G_pathcdr='s|^/[^/]*||' + _G_removedotparts=':dotsl + s|/\./|/|g + t dotsl + s|/\.$|/|' + _G_collapseslashes='s|/\{1,\}|/|g' + _G_finalslash='s|/*$|/|' + + # Start from root dir and reassemble the path. + func_normal_abspath_result= + func_normal_abspath_tpath=$1 + func_normal_abspath_altnamespace= + case $func_normal_abspath_tpath in + "") + # Empty path, that just means $cwd. + func_stripname '' '/' "`pwd`" + func_normal_abspath_result=$func_stripname_result + return + ;; + # The next three entries are used to spot a run of precisely + # two leading slashes without using negated character classes; + # we take advantage of case's first-match behaviour. + ///*) + # Unusual form of absolute path, do nothing. + ;; + //*) + # Not necessarily an ordinary path; POSIX reserves leading '//' + # and for example Cygwin uses it to access remote file shares + # over CIFS/SMB, so we conserve a leading double slash if found. + func_normal_abspath_altnamespace=/ + ;; + /*) + # Absolute path, do nothing. + ;; + *) + # Relative path, prepend $cwd. + func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath + ;; + esac + + # Cancel out all the simple stuff to save iterations. We also want + # the path to end with a slash for ease of parsing, so make sure + # there is one (and only one) here. + func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$_G_removedotparts" -e "$_G_collapseslashes" -e "$_G_finalslash"` + while :; do + # Processed it all yet? + if test / = "$func_normal_abspath_tpath"; then + # If we ascended to the root using ".." the result may be empty now. + if test -z "$func_normal_abspath_result"; then + func_normal_abspath_result=/ + fi + break + fi + func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$_G_pathcar"` + func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$_G_pathcdr"` + # Figure out what to do with it + case $func_normal_abspath_tcomponent in + "") + # Trailing empty path component, ignore it. + ;; + ..) + # Parent dir; strip last assembled component from result. + func_dirname "$func_normal_abspath_result" + func_normal_abspath_result=$func_dirname_result + ;; + *) + # Actual path component, append it. + func_append func_normal_abspath_result "/$func_normal_abspath_tcomponent" + ;; + esac + done + # Restore leading double-slash if one was found on entry. + func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result +} + + +# func_notquiet ARG... +# -------------------- +# Echo program name prefixed message only when not in quiet mode. +func_notquiet () +{ + $debug_cmd + + $opt_quiet || func_echo ${1+"$@"} + + # A bug in bash halts the script if the last line of a function + # fails when set -e is in force, so we need another command to + # work around that: + : +} + + +# func_relative_path SRCDIR DSTDIR +# -------------------------------- +# Set func_relative_path_result to the relative path from SRCDIR to DSTDIR. +func_relative_path () +{ + $debug_cmd + + func_relative_path_result= + func_normal_abspath "$1" + func_relative_path_tlibdir=$func_normal_abspath_result + func_normal_abspath "$2" + func_relative_path_tbindir=$func_normal_abspath_result + + # Ascend the tree starting from libdir + while :; do + # check if we have found a prefix of bindir + case $func_relative_path_tbindir in + $func_relative_path_tlibdir) + # found an exact match + func_relative_path_tcancelled= + break + ;; + $func_relative_path_tlibdir*) + # found a matching prefix + func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" + func_relative_path_tcancelled=$func_stripname_result + if test -z "$func_relative_path_result"; then + func_relative_path_result=. + fi + break + ;; + *) + func_dirname $func_relative_path_tlibdir + func_relative_path_tlibdir=$func_dirname_result + if test -z "$func_relative_path_tlibdir"; then + # Have to descend all the way to the root! + func_relative_path_result=../$func_relative_path_result + func_relative_path_tcancelled=$func_relative_path_tbindir + break + fi + func_relative_path_result=../$func_relative_path_result + ;; + esac + done + + # Now calculate path; take care to avoid doubling-up slashes. + func_stripname '' '/' "$func_relative_path_result" + func_relative_path_result=$func_stripname_result + func_stripname '/' '/' "$func_relative_path_tcancelled" + if test -n "$func_stripname_result"; then + func_append func_relative_path_result "/$func_stripname_result" + fi + + # Normalisation. If bindir is libdir, return '.' else relative path. + if test -n "$func_relative_path_result"; then + func_stripname './' '' "$func_relative_path_result" + func_relative_path_result=$func_stripname_result + fi + + test -n "$func_relative_path_result" || func_relative_path_result=. + + : +} + + +# func_quote_for_eval ARG... +# -------------------------- +# Aesthetically quote ARGs to be evaled later. +# This function returns two values: +# i) func_quote_for_eval_result +# double-quoted, suitable for a subsequent eval +# ii) func_quote_for_eval_unquoted_result +# has all characters that are still active within double +# quotes backslashified. +func_quote_for_eval () +{ + $debug_cmd + + func_quote_for_eval_unquoted_result= + func_quote_for_eval_result= + while test 0 -lt $#; do + case $1 in + *[\\\`\"\$]*) + _G_unquoted_arg=`printf '%s\n' "$1" |$SED "$sed_quote_subst"` ;; + *) + _G_unquoted_arg=$1 ;; + esac + if test -n "$func_quote_for_eval_unquoted_result"; then + func_append func_quote_for_eval_unquoted_result " $_G_unquoted_arg" + else + func_append func_quote_for_eval_unquoted_result "$_G_unquoted_arg" + fi + + case $_G_unquoted_arg in + # Double-quote args containing shell metacharacters to delay + # word splitting, command substitution and variable expansion + # for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + _G_quoted_arg=\"$_G_unquoted_arg\" + ;; + *) + _G_quoted_arg=$_G_unquoted_arg + ;; + esac + + if test -n "$func_quote_for_eval_result"; then + func_append func_quote_for_eval_result " $_G_quoted_arg" + else + func_append func_quote_for_eval_result "$_G_quoted_arg" + fi + shift + done +} + + +# func_quote_for_expand ARG +# ------------------------- +# Aesthetically quote ARG to be evaled later; same as above, +# but do not quote variable references. +func_quote_for_expand () +{ + $debug_cmd + + case $1 in + *[\\\`\"]*) + _G_arg=`$ECHO "$1" | $SED \ + -e "$sed_double_quote_subst" -e "$sed_double_backslash"` ;; + *) + _G_arg=$1 ;; + esac + + case $_G_arg in + # Double-quote args containing shell metacharacters to delay + # word splitting and command substitution for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + _G_arg=\"$_G_arg\" + ;; + esac + + func_quote_for_expand_result=$_G_arg +} + + +# func_stripname PREFIX SUFFIX NAME +# --------------------------------- +# strip PREFIX and SUFFIX from NAME, and store in func_stripname_result. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +if test yes = "$_G_HAVE_XSI_OPS"; then + eval 'func_stripname () + { + $debug_cmd + + # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are + # positional parameters, so assign one to ordinary variable first. + func_stripname_result=$3 + func_stripname_result=${func_stripname_result#"$1"} + func_stripname_result=${func_stripname_result%"$2"} + }' +else + func_stripname () + { + $debug_cmd + + case $2 in + .*) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%\\\\$2\$%%"`;; + *) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%$2\$%%"`;; + esac + } +fi + + +# func_show_eval CMD [FAIL_EXP] +# ----------------------------- +# Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. +func_show_eval () +{ + $debug_cmd + + _G_cmd=$1 + _G_fail_exp=${2-':'} + + func_quote_for_expand "$_G_cmd" + eval "func_notquiet $func_quote_for_expand_result" + + $opt_dry_run || { + eval "$_G_cmd" + _G_status=$? + if test 0 -ne "$_G_status"; then + eval "(exit $_G_status); $_G_fail_exp" + fi + } +} + + +# func_show_eval_locale CMD [FAIL_EXP] +# ------------------------------------ +# Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. Use the saved locale for evaluation. +func_show_eval_locale () +{ + $debug_cmd + + _G_cmd=$1 + _G_fail_exp=${2-':'} + + $opt_quiet || { + func_quote_for_expand "$_G_cmd" + eval "func_echo $func_quote_for_expand_result" + } + + $opt_dry_run || { + eval "$_G_user_locale + $_G_cmd" + _G_status=$? + eval "$_G_safe_locale" + if test 0 -ne "$_G_status"; then + eval "(exit $_G_status); $_G_fail_exp" + fi + } +} + + +# func_tr_sh +# ---------- +# Turn $1 into a string suitable for a shell variable name. +# Result is stored in $func_tr_sh_result. All characters +# not in the set a-zA-Z0-9_ are replaced with '_'. Further, +# if $1 begins with a digit, a '_' is prepended as well. +func_tr_sh () +{ + $debug_cmd + + case $1 in + [0-9]* | *[!a-zA-Z0-9_]*) + func_tr_sh_result=`$ECHO "$1" | $SED -e 's/^\([0-9]\)/_\1/' -e 's/[^a-zA-Z0-9_]/_/g'` + ;; + * ) + func_tr_sh_result=$1 + ;; + esac +} + + +# func_verbose ARG... +# ------------------- +# Echo program name prefixed message in verbose mode only. +func_verbose () +{ + $debug_cmd + + $opt_verbose && func_echo "$*" + + : +} + + +# func_warn_and_continue ARG... +# ----------------------------- +# Echo program name prefixed warning message to standard error. +func_warn_and_continue () +{ + $debug_cmd + + $require_term_colors + + func_echo_infix_1 "${tc_red}warning$tc_reset" "$*" >&2 +} + + +# func_warning CATEGORY ARG... +# ---------------------------- +# Echo program name prefixed warning message to standard error. Warning +# messages can be filtered according to CATEGORY, where this function +# elides messages where CATEGORY is not listed in the global variable +# 'opt_warning_types'. +func_warning () +{ + $debug_cmd + + # CATEGORY must be in the warning_categories list! + case " $warning_categories " in + *" $1 "*) ;; + *) func_internal_error "invalid warning category '$1'" ;; + esac + + _G_category=$1 + shift + + case " $opt_warning_types " in + *" $_G_category "*) $warning_func ${1+"$@"} ;; + esac +} + + +# func_sort_ver VER1 VER2 +# ----------------------- +# 'sort -V' is not generally available. +# Note this deviates from the version comparison in automake +# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a +# but this should suffice as we won't be specifying old +# version formats or redundant trailing .0 in bootstrap.conf. +# If we did want full compatibility then we should probably +# use m4_version_compare from autoconf. +func_sort_ver () +{ + $debug_cmd + + printf '%s\n%s\n' "$1" "$2" \ + | sort -t. -k 1,1n -k 2,2n -k 3,3n -k 4,4n -k 5,5n -k 6,6n -k 7,7n -k 8,8n -k 9,9n +} + +# func_lt_ver PREV CURR +# --------------------- +# Return true if PREV and CURR are in the correct order according to +# func_sort_ver, otherwise false. Use it like this: +# +# func_lt_ver "$prev_ver" "$proposed_ver" || func_fatal_error "..." +func_lt_ver () +{ + $debug_cmd + + test "x$1" = x`func_sort_ver "$1" "$2" | $SED 1q` +} + + +# Local variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'before-save-hook 'time-stamp) +# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC" +# time-stamp-time-zone: "UTC" +# End: +#! /bin/sh + +# Set a version string for this script. +scriptversion=2014-01-07.03; # UTC + +# A portable, pluggable option parser for Bourne shell. +# Written by Gary V. Vaughan, 2010 + +# Copyright (C) 2010-2015 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# Please report bugs or propose patches to gary@gnu.org. + + +## ------ ## +## Usage. ## +## ------ ## + +# This file is a library for parsing options in your shell scripts along +# with assorted other useful supporting features that you can make use +# of too. +# +# For the simplest scripts you might need only: +# +# #!/bin/sh +# . relative/path/to/funclib.sh +# . relative/path/to/options-parser +# scriptversion=1.0 +# func_options ${1+"$@"} +# eval set dummy "$func_options_result"; shift +# ...rest of your script... +# +# In order for the '--version' option to work, you will need to have a +# suitably formatted comment like the one at the top of this file +# starting with '# Written by ' and ending with '# warranty; '. +# +# For '-h' and '--help' to work, you will also need a one line +# description of your script's purpose in a comment directly above the +# '# Written by ' line, like the one at the top of this file. +# +# The default options also support '--debug', which will turn on shell +# execution tracing (see the comment above debug_cmd below for another +# use), and '--verbose' and the func_verbose function to allow your script +# to display verbose messages only when your user has specified +# '--verbose'. +# +# After sourcing this file, you can plug processing for additional +# options by amending the variables from the 'Configuration' section +# below, and following the instructions in the 'Option parsing' +# section further down. + +## -------------- ## +## Configuration. ## +## -------------- ## + +# You should override these variables in your script after sourcing this +# file so that they reflect the customisations you have added to the +# option parser. + +# The usage line for option parsing errors and the start of '-h' and +# '--help' output messages. You can embed shell variables for delayed +# expansion at the time the message is displayed, but you will need to +# quote other shell meta-characters carefully to prevent them being +# expanded when the contents are evaled. +usage='$progpath [OPTION]...' + +# Short help message in response to '-h' and '--help'. Add to this or +# override it after sourcing this library to reflect the full set of +# options your script accepts. +usage_message="\ + --debug enable verbose shell tracing + -W, --warnings=CATEGORY + report the warnings falling in CATEGORY [all] + -v, --verbose verbosely report processing + --version print version information and exit + -h, --help print short or long help message and exit +" + +# Additional text appended to 'usage_message' in response to '--help'. +long_help_message=" +Warning categories include: + 'all' show all warnings + 'none' turn off all the warnings + 'error' warnings are treated as fatal errors" + +# Help message printed before fatal option parsing errors. +fatal_help="Try '\$progname --help' for more information." + + + +## ------------------------- ## +## Hook function management. ## +## ------------------------- ## + +# This section contains functions for adding, removing, and running hooks +# to the main code. A hook is just a named list of of function, that can +# be run in order later on. + +# func_hookable FUNC_NAME +# ----------------------- +# Declare that FUNC_NAME will run hooks added with +# 'func_add_hook FUNC_NAME ...'. +func_hookable () +{ + $debug_cmd + + func_append hookable_fns " $1" +} + + +# func_add_hook FUNC_NAME HOOK_FUNC +# --------------------------------- +# Request that FUNC_NAME call HOOK_FUNC before it returns. FUNC_NAME must +# first have been declared "hookable" by a call to 'func_hookable'. +func_add_hook () +{ + $debug_cmd + + case " $hookable_fns " in + *" $1 "*) ;; + *) func_fatal_error "'$1' does not accept hook functions." ;; + esac + + eval func_append ${1}_hooks '" $2"' +} + + +# func_remove_hook FUNC_NAME HOOK_FUNC +# ------------------------------------ +# Remove HOOK_FUNC from the list of functions called by FUNC_NAME. +func_remove_hook () +{ + $debug_cmd + + eval ${1}_hooks='`$ECHO "\$'$1'_hooks" |$SED "s| '$2'||"`' +} + + +# func_run_hooks FUNC_NAME [ARG]... +# --------------------------------- +# Run all hook functions registered to FUNC_NAME. +# It is assumed that the list of hook functions contains nothing more +# than a whitespace-delimited list of legal shell function names, and +# no effort is wasted trying to catch shell meta-characters or preserve +# whitespace. +func_run_hooks () +{ + $debug_cmd + + case " $hookable_fns " in + *" $1 "*) ;; + *) func_fatal_error "'$1' does not support hook funcions.n" ;; + esac + + eval _G_hook_fns=\$$1_hooks; shift + + for _G_hook in $_G_hook_fns; do + eval $_G_hook '"$@"' + + # store returned options list back into positional + # parameters for next 'cmd' execution. + eval _G_hook_result=\$${_G_hook}_result + eval set dummy "$_G_hook_result"; shift + done + + func_quote_for_eval ${1+"$@"} + func_run_hooks_result=$func_quote_for_eval_result +} + + + +## --------------- ## +## Option parsing. ## +## --------------- ## + +# In order to add your own option parsing hooks, you must accept the +# full positional parameter list in your hook function, remove any +# options that you action, and then pass back the remaining unprocessed +# options in '_result', escaped suitably for +# 'eval'. Like this: +# +# my_options_prep () +# { +# $debug_cmd +# +# # Extend the existing usage message. +# usage_message=$usage_message' +# -s, --silent don'\''t print informational messages +# ' +# +# func_quote_for_eval ${1+"$@"} +# my_options_prep_result=$func_quote_for_eval_result +# } +# func_add_hook func_options_prep my_options_prep +# +# +# my_silent_option () +# { +# $debug_cmd +# +# # Note that for efficiency, we parse as many options as we can +# # recognise in a loop before passing the remainder back to the +# # caller on the first unrecognised argument we encounter. +# while test $# -gt 0; do +# opt=$1; shift +# case $opt in +# --silent|-s) opt_silent=: ;; +# # Separate non-argument short options: +# -s*) func_split_short_opt "$_G_opt" +# set dummy "$func_split_short_opt_name" \ +# "-$func_split_short_opt_arg" ${1+"$@"} +# shift +# ;; +# *) set dummy "$_G_opt" "$*"; shift; break ;; +# esac +# done +# +# func_quote_for_eval ${1+"$@"} +# my_silent_option_result=$func_quote_for_eval_result +# } +# func_add_hook func_parse_options my_silent_option +# +# +# my_option_validation () +# { +# $debug_cmd +# +# $opt_silent && $opt_verbose && func_fatal_help "\ +# '--silent' and '--verbose' options are mutually exclusive." +# +# func_quote_for_eval ${1+"$@"} +# my_option_validation_result=$func_quote_for_eval_result +# } +# func_add_hook func_validate_options my_option_validation +# +# You'll alse need to manually amend $usage_message to reflect the extra +# options you parse. It's preferable to append if you can, so that +# multiple option parsing hooks can be added safely. + + +# func_options [ARG]... +# --------------------- +# All the functions called inside func_options are hookable. See the +# individual implementations for details. +func_hookable func_options +func_options () +{ + $debug_cmd + + func_options_prep ${1+"$@"} + eval func_parse_options \ + ${func_options_prep_result+"$func_options_prep_result"} + eval func_validate_options \ + ${func_parse_options_result+"$func_parse_options_result"} + + eval func_run_hooks func_options \ + ${func_validate_options_result+"$func_validate_options_result"} + + # save modified positional parameters for caller + func_options_result=$func_run_hooks_result +} + + +# func_options_prep [ARG]... +# -------------------------- +# All initialisations required before starting the option parse loop. +# Note that when calling hook functions, we pass through the list of +# positional parameters. If a hook function modifies that list, and +# needs to propogate that back to rest of this script, then the complete +# modified list must be put in 'func_run_hooks_result' before +# returning. +func_hookable func_options_prep +func_options_prep () +{ + $debug_cmd + + # Option defaults: + opt_verbose=false + opt_warning_types= + + func_run_hooks func_options_prep ${1+"$@"} + + # save modified positional parameters for caller + func_options_prep_result=$func_run_hooks_result +} + + +# func_parse_options [ARG]... +# --------------------------- +# The main option parsing loop. +func_hookable func_parse_options +func_parse_options () +{ + $debug_cmd + + func_parse_options_result= + + # this just eases exit handling + while test $# -gt 0; do + # Defer to hook functions for initial option parsing, so they + # get priority in the event of reusing an option name. + func_run_hooks func_parse_options ${1+"$@"} + + # Adjust func_parse_options positional parameters to match + eval set dummy "$func_run_hooks_result"; shift + + # Break out of the loop if we already parsed every option. + test $# -gt 0 || break + + _G_opt=$1 + shift + case $_G_opt in + --debug|-x) debug_cmd='set -x' + func_echo "enabling shell trace mode" + $debug_cmd + ;; + + --no-warnings|--no-warning|--no-warn) + set dummy --warnings none ${1+"$@"} + shift + ;; + + --warnings|--warning|-W) + test $# = 0 && func_missing_arg $_G_opt && break + case " $warning_categories $1" in + *" $1 "*) + # trailing space prevents matching last $1 above + func_append_uniq opt_warning_types " $1" + ;; + *all) + opt_warning_types=$warning_categories + ;; + *none) + opt_warning_types=none + warning_func=: + ;; + *error) + opt_warning_types=$warning_categories + warning_func=func_fatal_error + ;; + *) + func_fatal_error \ + "unsupported warning category: '$1'" + ;; + esac + shift + ;; + + --verbose|-v) opt_verbose=: ;; + --version) func_version ;; + -\?|-h) func_usage ;; + --help) func_help ;; + + # Separate optargs to long options (plugins may need this): + --*=*) func_split_equals "$_G_opt" + set dummy "$func_split_equals_lhs" \ + "$func_split_equals_rhs" ${1+"$@"} + shift + ;; + + # Separate optargs to short options: + -W*) + func_split_short_opt "$_G_opt" + set dummy "$func_split_short_opt_name" \ + "$func_split_short_opt_arg" ${1+"$@"} + shift + ;; + + # Separate non-argument short options: + -\?*|-h*|-v*|-x*) + func_split_short_opt "$_G_opt" + set dummy "$func_split_short_opt_name" \ + "-$func_split_short_opt_arg" ${1+"$@"} + shift + ;; + + --) break ;; + -*) func_fatal_help "unrecognised option: '$_G_opt'" ;; + *) set dummy "$_G_opt" ${1+"$@"}; shift; break ;; + esac + done + + # save modified positional parameters for caller + func_quote_for_eval ${1+"$@"} + func_parse_options_result=$func_quote_for_eval_result +} + + +# func_validate_options [ARG]... +# ------------------------------ +# Perform any sanity checks on option settings and/or unconsumed +# arguments. +func_hookable func_validate_options +func_validate_options () +{ + $debug_cmd + + # Display all warnings if -W was not given. + test -n "$opt_warning_types" || opt_warning_types=" $warning_categories" + + func_run_hooks func_validate_options ${1+"$@"} + + # Bail if the options were screwed! + $exit_cmd $EXIT_FAILURE + + # save modified positional parameters for caller + func_validate_options_result=$func_run_hooks_result +} + + + +## ----------------- ## +## Helper functions. ## +## ----------------- ## + +# This section contains the helper functions used by the rest of the +# hookable option parser framework in ascii-betical order. + + +# func_fatal_help ARG... +# ---------------------- +# Echo program name prefixed message to standard error, followed by +# a help hint, and exit. +func_fatal_help () +{ + $debug_cmd + + eval \$ECHO \""Usage: $usage"\" + eval \$ECHO \""$fatal_help"\" + func_error ${1+"$@"} + exit $EXIT_FAILURE +} + + +# func_help +# --------- +# Echo long help message to standard output and exit. +func_help () +{ + $debug_cmd + + func_usage_message + $ECHO "$long_help_message" + exit 0 +} + + +# func_missing_arg ARGNAME +# ------------------------ +# Echo program name prefixed message to standard error and set global +# exit_cmd. +func_missing_arg () +{ + $debug_cmd + + func_error "Missing argument for '$1'." + exit_cmd=exit +} + + +# func_split_equals STRING +# ------------------------ +# Set func_split_equals_lhs and func_split_equals_rhs shell variables after +# splitting STRING at the '=' sign. +test -z "$_G_HAVE_XSI_OPS" \ + && (eval 'x=a/b/c; + test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \ + && _G_HAVE_XSI_OPS=yes + +if test yes = "$_G_HAVE_XSI_OPS" +then + # This is an XSI compatible shell, allowing a faster implementation... + eval 'func_split_equals () + { + $debug_cmd + + func_split_equals_lhs=${1%%=*} + func_split_equals_rhs=${1#*=} + test "x$func_split_equals_lhs" = "x$1" \ + && func_split_equals_rhs= + }' +else + # ...otherwise fall back to using expr, which is often a shell builtin. + func_split_equals () + { + $debug_cmd + + func_split_equals_lhs=`expr "x$1" : 'x\([^=]*\)'` + func_split_equals_rhs= + test "x$func_split_equals_lhs" = "x$1" \ + || func_split_equals_rhs=`expr "x$1" : 'x[^=]*=\(.*\)$'` + } +fi #func_split_equals + + +# func_split_short_opt SHORTOPT +# ----------------------------- +# Set func_split_short_opt_name and func_split_short_opt_arg shell +# variables after splitting SHORTOPT after the 2nd character. +if test yes = "$_G_HAVE_XSI_OPS" +then + # This is an XSI compatible shell, allowing a faster implementation... + eval 'func_split_short_opt () + { + $debug_cmd + + func_split_short_opt_arg=${1#??} + func_split_short_opt_name=${1%"$func_split_short_opt_arg"} + }' +else + # ...otherwise fall back to using expr, which is often a shell builtin. + func_split_short_opt () + { + $debug_cmd + + func_split_short_opt_name=`expr "x$1" : 'x-\(.\)'` + func_split_short_opt_arg=`expr "x$1" : 'x-.\(.*\)$'` + } +fi #func_split_short_opt + + +# func_usage +# ---------- +# Echo short help message to standard output and exit. +func_usage () +{ + $debug_cmd + + func_usage_message + $ECHO "Run '$progname --help |${PAGER-more}' for full usage" + exit 0 +} + + +# func_usage_message +# ------------------ +# Echo short help message to standard output. +func_usage_message () +{ + $debug_cmd + + eval \$ECHO \""Usage: $usage"\" + echo + $SED -n 's|^# || + /^Written by/{ + x;p;x + } + h + /^Written by/q' < "$progpath" + echo + eval \$ECHO \""$usage_message"\" +} + + +# func_version +# ------------ +# Echo version message to standard output and exit. +func_version () +{ + $debug_cmd + + printf '%s\n' "$progname $scriptversion" + $SED -n ' + /(C)/!b go + :more + /\./!{ + N + s|\n# | | + b more + } + :go + /^# Written by /,/# warranty; / { + s|^# || + s|^# *$|| + s|\((C)\)[ 0-9,-]*[ ,-]\([1-9][0-9]* \)|\1 \2| + p + } + /^# Written by / { + s|^# || + p + } + /^warranty; /q' < "$progpath" + + exit $? +} + + +# Local variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'before-save-hook 'time-stamp) +# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC" +# time-stamp-time-zone: "UTC" +# End: + +# Set a version string. +scriptversion='(GNU libtool) 2.4.6' + + +# func_echo ARG... +# ---------------- +# Libtool also displays the current mode in messages, so override +# funclib.sh func_echo with this custom definition. +func_echo () +{ + $debug_cmd + + _G_message=$* + + func_echo_IFS=$IFS + IFS=$nl + for _G_line in $_G_message; do + IFS=$func_echo_IFS + $ECHO "$progname${opt_mode+: $opt_mode}: $_G_line" + done + IFS=$func_echo_IFS +} + + +# func_warning ARG... +# ------------------- +# Libtool warnings are not categorized, so override funclib.sh +# func_warning with this simpler definition. +func_warning () +{ + $debug_cmd + + $warning_func ${1+"$@"} +} + + +## ---------------- ## +## Options parsing. ## +## ---------------- ## + +# Hook in the functions to make sure our own options are parsed during +# the option parsing loop. + +usage='$progpath [OPTION]... [MODE-ARG]...' + +# Short help message in response to '-h'. +usage_message="Options: + --config show all configuration variables + --debug enable verbose shell tracing + -n, --dry-run display commands without modifying any files + --features display basic configuration information and exit + --mode=MODE use operation mode MODE + --no-warnings equivalent to '-Wnone' + --preserve-dup-deps don't remove duplicate dependency libraries + --quiet, --silent don't print informational messages + --tag=TAG use configuration variables from tag TAG + -v, --verbose print more informational messages than default + --version print version information + -W, --warnings=CATEGORY report the warnings falling in CATEGORY [all] + -h, --help, --help-all print short, long, or detailed help message +" + +# Additional text appended to 'usage_message' in response to '--help'. +func_help () +{ + $debug_cmd + + func_usage_message + $ECHO "$long_help_message + +MODE must be one of the following: + + clean remove files from the build directory + compile compile a source file into a libtool object + execute automatically set library path, then run a program + finish complete the installation of libtool libraries + install install libraries or executables + link create a library or an executable + uninstall remove libraries from an installed directory + +MODE-ARGS vary depending on the MODE. When passed as first option, +'--mode=MODE' may be abbreviated as 'MODE' or a unique abbreviation of that. +Try '$progname --help --mode=MODE' for a more detailed description of MODE. + +When reporting a bug, please describe a test case to reproduce it and +include the following information: + + host-triplet: $host + shell: $SHELL + compiler: $LTCC + compiler flags: $LTCFLAGS + linker: $LD (gnu? $with_gnu_ld) + version: $progname (GNU libtool) 2.4.6 + automake: `($AUTOMAKE --version) 2>/dev/null |$SED 1q` + autoconf: `($AUTOCONF --version) 2>/dev/null |$SED 1q` + +Report bugs to . +GNU libtool home page: . +General help using GNU software: ." + exit 0 +} + + +# func_lo2o OBJECT-NAME +# --------------------- +# Transform OBJECT-NAME from a '.lo' suffix to the platform specific +# object suffix. + +lo2o=s/\\.lo\$/.$objext/ +o2lo=s/\\.$objext\$/.lo/ + +if test yes = "$_G_HAVE_XSI_OPS"; then + eval 'func_lo2o () + { + case $1 in + *.lo) func_lo2o_result=${1%.lo}.$objext ;; + * ) func_lo2o_result=$1 ;; + esac + }' + + # func_xform LIBOBJ-OR-SOURCE + # --------------------------- + # Transform LIBOBJ-OR-SOURCE from a '.o' or '.c' (or otherwise) + # suffix to a '.lo' libtool-object suffix. + eval 'func_xform () + { + func_xform_result=${1%.*}.lo + }' +else + # ...otherwise fall back to using sed. + func_lo2o () + { + func_lo2o_result=`$ECHO "$1" | $SED "$lo2o"` + } + + func_xform () + { + func_xform_result=`$ECHO "$1" | $SED 's|\.[^.]*$|.lo|'` + } +fi + + +# func_fatal_configuration ARG... +# ------------------------------- +# Echo program name prefixed message to standard error, followed by +# a configuration failure hint, and exit. +func_fatal_configuration () +{ + func__fatal_error ${1+"$@"} \ + "See the $PACKAGE documentation for more information." \ + "Fatal configuration error." +} + + +# func_config +# ----------- +# Display the configuration for all the tags in this script. +func_config () +{ + re_begincf='^# ### BEGIN LIBTOOL' + re_endcf='^# ### END LIBTOOL' + + # Default configuration. + $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" + + # Now print the configurations for the tags. + for tagname in $taglist; do + $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" + done + + exit $? +} + + +# func_features +# ------------- +# Display the features supported by this script. +func_features () +{ + echo "host: $host" + if test yes = "$build_libtool_libs"; then + echo "enable shared libraries" + else + echo "disable shared libraries" + fi + if test yes = "$build_old_libs"; then + echo "enable static libraries" + else + echo "disable static libraries" + fi + + exit $? +} + + +# func_enable_tag TAGNAME +# ----------------------- +# Verify that TAGNAME is valid, and either flag an error and exit, or +# enable the TAGNAME tag. We also add TAGNAME to the global $taglist +# variable here. +func_enable_tag () +{ + # Global variable: + tagname=$1 + + re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" + re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" + sed_extractcf=/$re_begincf/,/$re_endcf/p + + # Validate tagname. + case $tagname in + *[!-_A-Za-z0-9,/]*) + func_fatal_error "invalid tag name: $tagname" + ;; + esac + + # Don't test for the "default" C tag, as we know it's + # there but not specially marked. + case $tagname in + CC) ;; + *) + if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then + taglist="$taglist $tagname" + + # Evaluate the configuration. Be careful to quote the path + # and the sed script, to avoid splitting on whitespace, but + # also don't use non-portable quotes within backquotes within + # quotes we have to do it in 2 steps: + extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` + eval "$extractedcf" + else + func_error "ignoring unknown tag $tagname" + fi + ;; + esac +} + + +# func_check_version_match +# ------------------------ +# Ensure that we are using m4 macros, and libtool script from the same +# release of libtool. +func_check_version_match () +{ + if test "$package_revision" != "$macro_revision"; then + if test "$VERSION" != "$macro_version"; then + if test -z "$macro_version"; then + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from an older release. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + fi + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, +$progname: but the definition of this LT_INIT comes from revision $macro_revision. +$progname: You should recreate aclocal.m4 with macros from revision $package_revision +$progname: of $PACKAGE $VERSION and run autoconf again. +_LT_EOF + fi + + exit $EXIT_MISMATCH + fi +} + + +# libtool_options_prep [ARG]... +# ----------------------------- +# Preparation for options parsed by libtool. +libtool_options_prep () +{ + $debug_mode + + # Option defaults: + opt_config=false + opt_dlopen= + opt_dry_run=false + opt_help=false + opt_mode= + opt_preserve_dup_deps=false + opt_quiet=false + + nonopt= + preserve_args= + + # Shorthand for --mode=foo, only valid as the first argument + case $1 in + clean|clea|cle|cl) + shift; set dummy --mode clean ${1+"$@"}; shift + ;; + compile|compil|compi|comp|com|co|c) + shift; set dummy --mode compile ${1+"$@"}; shift + ;; + execute|execut|execu|exec|exe|ex|e) + shift; set dummy --mode execute ${1+"$@"}; shift + ;; + finish|finis|fini|fin|fi|f) + shift; set dummy --mode finish ${1+"$@"}; shift + ;; + install|instal|insta|inst|ins|in|i) + shift; set dummy --mode install ${1+"$@"}; shift + ;; + link|lin|li|l) + shift; set dummy --mode link ${1+"$@"}; shift + ;; + uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) + shift; set dummy --mode uninstall ${1+"$@"}; shift + ;; + esac + + # Pass back the list of options. + func_quote_for_eval ${1+"$@"} + libtool_options_prep_result=$func_quote_for_eval_result +} +func_add_hook func_options_prep libtool_options_prep + + +# libtool_parse_options [ARG]... +# --------------------------------- +# Provide handling for libtool specific options. +libtool_parse_options () +{ + $debug_cmd + + # Perform our own loop to consume as many options as possible in + # each iteration. + while test $# -gt 0; do + _G_opt=$1 + shift + case $_G_opt in + --dry-run|--dryrun|-n) + opt_dry_run=: + ;; + + --config) func_config ;; + + --dlopen|-dlopen) + opt_dlopen="${opt_dlopen+$opt_dlopen +}$1" + shift + ;; + + --preserve-dup-deps) + opt_preserve_dup_deps=: ;; + + --features) func_features ;; + + --finish) set dummy --mode finish ${1+"$@"}; shift ;; + + --help) opt_help=: ;; + + --help-all) opt_help=': help-all' ;; + + --mode) test $# = 0 && func_missing_arg $_G_opt && break + opt_mode=$1 + case $1 in + # Valid mode arguments: + clean|compile|execute|finish|install|link|relink|uninstall) ;; + + # Catch anything else as an error + *) func_error "invalid argument for $_G_opt" + exit_cmd=exit + break + ;; + esac + shift + ;; + + --no-silent|--no-quiet) + opt_quiet=false + func_append preserve_args " $_G_opt" + ;; + + --no-warnings|--no-warning|--no-warn) + opt_warning=false + func_append preserve_args " $_G_opt" + ;; + + --no-verbose) + opt_verbose=false + func_append preserve_args " $_G_opt" + ;; + + --silent|--quiet) + opt_quiet=: + opt_verbose=false + func_append preserve_args " $_G_opt" + ;; + + --tag) test $# = 0 && func_missing_arg $_G_opt && break + opt_tag=$1 + func_append preserve_args " $_G_opt $1" + func_enable_tag "$1" + shift + ;; + + --verbose|-v) opt_quiet=false + opt_verbose=: + func_append preserve_args " $_G_opt" + ;; + + # An option not handled by this hook function: + *) set dummy "$_G_opt" ${1+"$@"}; shift; break ;; + esac + done + + + # save modified positional parameters for caller + func_quote_for_eval ${1+"$@"} + libtool_parse_options_result=$func_quote_for_eval_result +} +func_add_hook func_parse_options libtool_parse_options + + + +# libtool_validate_options [ARG]... +# --------------------------------- +# Perform any sanity checks on option settings and/or unconsumed +# arguments. +libtool_validate_options () +{ + # save first non-option argument + if test 0 -lt $#; then + nonopt=$1 + shift + fi + + # preserve --debug + test : = "$debug_cmd" || func_append preserve_args " --debug" + + case $host in + # Solaris2 added to fix http://debbugs.gnu.org/cgi/bugreport.cgi?bug=16452 + # see also: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=59788 + *cygwin* | *mingw* | *pw32* | *cegcc* | *solaris2* | *os2*) + # don't eliminate duplications in $postdeps and $predeps + opt_duplicate_compiler_generated_deps=: + ;; + *) + opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps + ;; + esac + + $opt_help || { + # Sanity checks first: + func_check_version_match + + test yes != "$build_libtool_libs" \ + && test yes != "$build_old_libs" \ + && func_fatal_configuration "not configured to build any kind of library" + + # Darwin sucks + eval std_shrext=\"$shrext_cmds\" + + # Only execute mode is allowed to have -dlopen flags. + if test -n "$opt_dlopen" && test execute != "$opt_mode"; then + func_error "unrecognized option '-dlopen'" + $ECHO "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Change the help message to a mode-specific one. + generic_help=$help + help="Try '$progname --help --mode=$opt_mode' for more information." + } + + # Pass back the unparsed argument list + func_quote_for_eval ${1+"$@"} + libtool_validate_options_result=$func_quote_for_eval_result +} +func_add_hook func_validate_options libtool_validate_options + + +# Process options as early as possible so that --help and --version +# can return quickly. +func_options ${1+"$@"} +eval set dummy "$func_options_result"; shift + + + +## ----------- ## +## Main. ## +## ----------- ## + +magic='%%%MAGIC variable%%%' +magic_exe='%%%MAGIC EXE variable%%%' + +# Global variables. +extracted_archives= +extracted_serial=0 + +# If this variable is set in any of the actions, the command in it +# will be execed at the end. This prevents here-documents from being +# left over by shells. +exec_cmd= + + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +$1 +_LTECHO_EOF' +} + +# func_generated_by_libtool +# True iff stdin has been generated by Libtool. This function is only +# a basic sanity check; it will hardly flush out determined imposters. +func_generated_by_libtool_p () +{ + $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 +} + +# func_lalib_p file +# True iff FILE is a libtool '.la' library or '.lo' object file. +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_lalib_p () +{ + test -f "$1" && + $SED -e 4q "$1" 2>/dev/null | func_generated_by_libtool_p +} + +# func_lalib_unsafe_p file +# True iff FILE is a libtool '.la' library or '.lo' object file. +# This function implements the same check as func_lalib_p without +# resorting to external programs. To this end, it redirects stdin and +# closes it afterwards, without saving the original file descriptor. +# As a safety measure, use it only where a negative result would be +# fatal anyway. Works if 'file' does not exist. +func_lalib_unsafe_p () +{ + lalib_p=no + if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then + for lalib_p_l in 1 2 3 4 + do + read lalib_p_line + case $lalib_p_line in + \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; + esac + done + exec 0<&5 5<&- + fi + test yes = "$lalib_p" +} + +# func_ltwrapper_script_p file +# True iff FILE is a libtool wrapper script +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_script_p () +{ + test -f "$1" && + $lt_truncate_bin < "$1" 2>/dev/null | func_generated_by_libtool_p +} + +# func_ltwrapper_executable_p file +# True iff FILE is a libtool wrapper executable +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_executable_p () +{ + func_ltwrapper_exec_suffix= + case $1 in + *.exe) ;; + *) func_ltwrapper_exec_suffix=.exe ;; + esac + $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 +} + +# func_ltwrapper_scriptname file +# Assumes file is an ltwrapper_executable +# uses $file to determine the appropriate filename for a +# temporary ltwrapper_script. +func_ltwrapper_scriptname () +{ + func_dirname_and_basename "$1" "" "." + func_stripname '' '.exe' "$func_basename_result" + func_ltwrapper_scriptname_result=$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper +} + +# func_ltwrapper_p file +# True iff FILE is a libtool wrapper script or wrapper executable +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_p () +{ + func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" +} + + +# func_execute_cmds commands fail_cmd +# Execute tilde-delimited COMMANDS. +# If FAIL_CMD is given, eval that upon failure. +# FAIL_CMD may read-access the current command in variable CMD! +func_execute_cmds () +{ + $debug_cmd + + save_ifs=$IFS; IFS='~' + for cmd in $1; do + IFS=$sp$nl + eval cmd=\"$cmd\" + IFS=$save_ifs + func_show_eval "$cmd" "${2-:}" + done + IFS=$save_ifs +} + + +# func_source file +# Source FILE, adding directory component if necessary. +# Note that it is not necessary on cygwin/mingw to append a dot to +# FILE even if both FILE and FILE.exe exist: automatic-append-.exe +# behavior happens only for exec(3), not for open(2)! Also, sourcing +# 'FILE.' does not work on cygwin managed mounts. +func_source () +{ + $debug_cmd + + case $1 in + */* | *\\*) . "$1" ;; + *) . "./$1" ;; + esac +} + + +# func_resolve_sysroot PATH +# Replace a leading = in PATH with a sysroot. Store the result into +# func_resolve_sysroot_result +func_resolve_sysroot () +{ + func_resolve_sysroot_result=$1 + case $func_resolve_sysroot_result in + =*) + func_stripname '=' '' "$func_resolve_sysroot_result" + func_resolve_sysroot_result=$lt_sysroot$func_stripname_result + ;; + esac +} + +# func_replace_sysroot PATH +# If PATH begins with the sysroot, replace it with = and +# store the result into func_replace_sysroot_result. +func_replace_sysroot () +{ + case $lt_sysroot:$1 in + ?*:"$lt_sysroot"*) + func_stripname "$lt_sysroot" '' "$1" + func_replace_sysroot_result='='$func_stripname_result + ;; + *) + # Including no sysroot. + func_replace_sysroot_result=$1 + ;; + esac +} + +# func_infer_tag arg +# Infer tagged configuration to use if any are available and +# if one wasn't chosen via the "--tag" command line option. +# Only attempt this if the compiler in the base compile +# command doesn't match the default compiler. +# arg is usually of the form 'gcc ...' +func_infer_tag () +{ + $debug_cmd + + if test -n "$available_tags" && test -z "$tagname"; then + CC_quoted= + for arg in $CC; do + func_append_quoted CC_quoted "$arg" + done + CC_expanded=`func_echo_all $CC` + CC_quoted_expanded=`func_echo_all $CC_quoted` + case $@ in + # Blanks in the command may have been stripped by the calling shell, + # but not from the CC environment variable when configure was run. + " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ + " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;; + # Blanks at the start of $base_compile will cause this to fail + # if we don't check for them as well. + *) + for z in $available_tags; do + if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then + # Evaluate the configuration. + eval "`$SED -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" + CC_quoted= + for arg in $CC; do + # Double-quote args containing other shell metacharacters. + func_append_quoted CC_quoted "$arg" + done + CC_expanded=`func_echo_all $CC` + CC_quoted_expanded=`func_echo_all $CC_quoted` + case "$@ " in + " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ + " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) + # The compiler in the base compile command matches + # the one in the tagged configuration. + # Assume this is the tagged configuration we want. + tagname=$z + break + ;; + esac + fi + done + # If $tagname still isn't set, then no tagged configuration + # was found and let the user know that the "--tag" command + # line option must be used. + if test -z "$tagname"; then + func_echo "unable to infer tagged configuration" + func_fatal_error "specify a tag with '--tag'" +# else +# func_verbose "using $tagname tagged configuration" + fi + ;; + esac + fi +} + + + +# func_write_libtool_object output_name pic_name nonpic_name +# Create a libtool object file (analogous to a ".la" file), +# but don't create it if we're doing a dry run. +func_write_libtool_object () +{ + write_libobj=$1 + if test yes = "$build_libtool_libs"; then + write_lobj=\'$2\' + else + write_lobj=none + fi + + if test yes = "$build_old_libs"; then + write_oldobj=\'$3\' + else + write_oldobj=none + fi + + $opt_dry_run || { + cat >${write_libobj}T </dev/null` + if test "$?" -eq 0 && test -n "$func_convert_core_file_wine_to_w32_tmp"; then + func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" | + $SED -e "$sed_naive_backslashify"` + else + func_convert_core_file_wine_to_w32_result= + fi + fi +} +# end: func_convert_core_file_wine_to_w32 + + +# func_convert_core_path_wine_to_w32 ARG +# Helper function used by path conversion functions when $build is *nix, and +# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly +# configured wine environment available, with the winepath program in $build's +# $PATH. Assumes ARG has no leading or trailing path separator characters. +# +# ARG is path to be converted from $build format to win32. +# Result is available in $func_convert_core_path_wine_to_w32_result. +# Unconvertible file (directory) names in ARG are skipped; if no directory names +# are convertible, then the result may be empty. +func_convert_core_path_wine_to_w32 () +{ + $debug_cmd + + # unfortunately, winepath doesn't convert paths, only file names + func_convert_core_path_wine_to_w32_result= + if test -n "$1"; then + oldIFS=$IFS + IFS=: + for func_convert_core_path_wine_to_w32_f in $1; do + IFS=$oldIFS + func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f" + if test -n "$func_convert_core_file_wine_to_w32_result"; then + if test -z "$func_convert_core_path_wine_to_w32_result"; then + func_convert_core_path_wine_to_w32_result=$func_convert_core_file_wine_to_w32_result + else + func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result" + fi + fi + done + IFS=$oldIFS + fi +} +# end: func_convert_core_path_wine_to_w32 + + +# func_cygpath ARGS... +# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when +# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2) +# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or +# (2), returns the Cygwin file name or path in func_cygpath_result (input +# file name or path is assumed to be in w32 format, as previously converted +# from $build's *nix or MSYS format). In case (3), returns the w32 file name +# or path in func_cygpath_result (input file name or path is assumed to be in +# Cygwin format). Returns an empty string on error. +# +# ARGS are passed to cygpath, with the last one being the file name or path to +# be converted. +# +# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH +# environment variable; do not put it in $PATH. +func_cygpath () +{ + $debug_cmd + + if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then + func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null` + if test "$?" -ne 0; then + # on failure, ensure result is empty + func_cygpath_result= + fi + else + func_cygpath_result= + func_error "LT_CYGPATH is empty or specifies non-existent file: '$LT_CYGPATH'" + fi +} +#end: func_cygpath + + +# func_convert_core_msys_to_w32 ARG +# Convert file name or path ARG from MSYS format to w32 format. Return +# result in func_convert_core_msys_to_w32_result. +func_convert_core_msys_to_w32 () +{ + $debug_cmd + + # awkward: cmd appends spaces to result + func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null | + $SED -e 's/[ ]*$//' -e "$sed_naive_backslashify"` +} +#end: func_convert_core_msys_to_w32 + + +# func_convert_file_check ARG1 ARG2 +# Verify that ARG1 (a file name in $build format) was converted to $host +# format in ARG2. Otherwise, emit an error message, but continue (resetting +# func_to_host_file_result to ARG1). +func_convert_file_check () +{ + $debug_cmd + + if test -z "$2" && test -n "$1"; then + func_error "Could not determine host file name corresponding to" + func_error " '$1'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback: + func_to_host_file_result=$1 + fi +} +# end func_convert_file_check + + +# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH +# Verify that FROM_PATH (a path in $build format) was converted to $host +# format in TO_PATH. Otherwise, emit an error message, but continue, resetting +# func_to_host_file_result to a simplistic fallback value (see below). +func_convert_path_check () +{ + $debug_cmd + + if test -z "$4" && test -n "$3"; then + func_error "Could not determine the host path corresponding to" + func_error " '$3'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback. This is a deliberately simplistic "conversion" and + # should not be "improved". See libtool.info. + if test "x$1" != "x$2"; then + lt_replace_pathsep_chars="s|$1|$2|g" + func_to_host_path_result=`echo "$3" | + $SED -e "$lt_replace_pathsep_chars"` + else + func_to_host_path_result=$3 + fi + fi +} +# end func_convert_path_check + + +# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG +# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT +# and appending REPL if ORIG matches BACKPAT. +func_convert_path_front_back_pathsep () +{ + $debug_cmd + + case $4 in + $1 ) func_to_host_path_result=$3$func_to_host_path_result + ;; + esac + case $4 in + $2 ) func_append func_to_host_path_result "$3" + ;; + esac +} +# end func_convert_path_front_back_pathsep + + +################################################## +# $build to $host FILE NAME CONVERSION FUNCTIONS # +################################################## +# invoked via '$to_host_file_cmd ARG' +# +# In each case, ARG is the path to be converted from $build to $host format. +# Result will be available in $func_to_host_file_result. + + +# func_to_host_file ARG +# Converts the file name ARG from $build format to $host format. Return result +# in func_to_host_file_result. +func_to_host_file () +{ + $debug_cmd + + $to_host_file_cmd "$1" +} +# end func_to_host_file + + +# func_to_tool_file ARG LAZY +# converts the file name ARG from $build format to toolchain format. Return +# result in func_to_tool_file_result. If the conversion in use is listed +# in (the comma separated) LAZY, no conversion takes place. +func_to_tool_file () +{ + $debug_cmd + + case ,$2, in + *,"$to_tool_file_cmd",*) + func_to_tool_file_result=$1 + ;; + *) + $to_tool_file_cmd "$1" + func_to_tool_file_result=$func_to_host_file_result + ;; + esac +} +# end func_to_tool_file + + +# func_convert_file_noop ARG +# Copy ARG to func_to_host_file_result. +func_convert_file_noop () +{ + func_to_host_file_result=$1 +} +# end func_convert_file_noop + + +# func_convert_file_msys_to_w32 ARG +# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic +# conversion to w32 is not available inside the cwrapper. Returns result in +# func_to_host_file_result. +func_convert_file_msys_to_w32 () +{ + $debug_cmd + + func_to_host_file_result=$1 + if test -n "$1"; then + func_convert_core_msys_to_w32 "$1" + func_to_host_file_result=$func_convert_core_msys_to_w32_result + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_msys_to_w32 + + +# func_convert_file_cygwin_to_w32 ARG +# Convert file name ARG from Cygwin to w32 format. Returns result in +# func_to_host_file_result. +func_convert_file_cygwin_to_w32 () +{ + $debug_cmd + + func_to_host_file_result=$1 + if test -n "$1"; then + # because $build is cygwin, we call "the" cygpath in $PATH; no need to use + # LT_CYGPATH in this case. + func_to_host_file_result=`cygpath -m "$1"` + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_cygwin_to_w32 + + +# func_convert_file_nix_to_w32 ARG +# Convert file name ARG from *nix to w32 format. Requires a wine environment +# and a working winepath. Returns result in func_to_host_file_result. +func_convert_file_nix_to_w32 () +{ + $debug_cmd + + func_to_host_file_result=$1 + if test -n "$1"; then + func_convert_core_file_wine_to_w32 "$1" + func_to_host_file_result=$func_convert_core_file_wine_to_w32_result + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_nix_to_w32 + + +# func_convert_file_msys_to_cygwin ARG +# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. +# Returns result in func_to_host_file_result. +func_convert_file_msys_to_cygwin () +{ + $debug_cmd + + func_to_host_file_result=$1 + if test -n "$1"; then + func_convert_core_msys_to_w32 "$1" + func_cygpath -u "$func_convert_core_msys_to_w32_result" + func_to_host_file_result=$func_cygpath_result + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_msys_to_cygwin + + +# func_convert_file_nix_to_cygwin ARG +# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed +# in a wine environment, working winepath, and LT_CYGPATH set. Returns result +# in func_to_host_file_result. +func_convert_file_nix_to_cygwin () +{ + $debug_cmd + + func_to_host_file_result=$1 + if test -n "$1"; then + # convert from *nix to w32, then use cygpath to convert from w32 to cygwin. + func_convert_core_file_wine_to_w32 "$1" + func_cygpath -u "$func_convert_core_file_wine_to_w32_result" + func_to_host_file_result=$func_cygpath_result + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_nix_to_cygwin + + +############################################# +# $build to $host PATH CONVERSION FUNCTIONS # +############################################# +# invoked via '$to_host_path_cmd ARG' +# +# In each case, ARG is the path to be converted from $build to $host format. +# The result will be available in $func_to_host_path_result. +# +# Path separators are also converted from $build format to $host format. If +# ARG begins or ends with a path separator character, it is preserved (but +# converted to $host format) on output. +# +# All path conversion functions are named using the following convention: +# file name conversion function : func_convert_file_X_to_Y () +# path conversion function : func_convert_path_X_to_Y () +# where, for any given $build/$host combination the 'X_to_Y' value is the +# same. If conversion functions are added for new $build/$host combinations, +# the two new functions must follow this pattern, or func_init_to_host_path_cmd +# will break. + + +# func_init_to_host_path_cmd +# Ensures that function "pointer" variable $to_host_path_cmd is set to the +# appropriate value, based on the value of $to_host_file_cmd. +to_host_path_cmd= +func_init_to_host_path_cmd () +{ + $debug_cmd + + if test -z "$to_host_path_cmd"; then + func_stripname 'func_convert_file_' '' "$to_host_file_cmd" + to_host_path_cmd=func_convert_path_$func_stripname_result + fi +} + + +# func_to_host_path ARG +# Converts the path ARG from $build format to $host format. Return result +# in func_to_host_path_result. +func_to_host_path () +{ + $debug_cmd + + func_init_to_host_path_cmd + $to_host_path_cmd "$1" +} +# end func_to_host_path + + +# func_convert_path_noop ARG +# Copy ARG to func_to_host_path_result. +func_convert_path_noop () +{ + func_to_host_path_result=$1 +} +# end func_convert_path_noop + + +# func_convert_path_msys_to_w32 ARG +# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic +# conversion to w32 is not available inside the cwrapper. Returns result in +# func_to_host_path_result. +func_convert_path_msys_to_w32 () +{ + $debug_cmd + + func_to_host_path_result=$1 + if test -n "$1"; then + # Remove leading and trailing path separator characters from ARG. MSYS + # behavior is inconsistent here; cygpath turns them into '.;' and ';.'; + # and winepath ignores them completely. + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" + func_to_host_path_result=$func_convert_core_msys_to_w32_result + func_convert_path_check : ";" \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" + fi +} +# end func_convert_path_msys_to_w32 + + +# func_convert_path_cygwin_to_w32 ARG +# Convert path ARG from Cygwin to w32 format. Returns result in +# func_to_host_file_result. +func_convert_path_cygwin_to_w32 () +{ + $debug_cmd + + func_to_host_path_result=$1 + if test -n "$1"; then + # See func_convert_path_msys_to_w32: + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"` + func_convert_path_check : ";" \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" + fi +} +# end func_convert_path_cygwin_to_w32 + + +# func_convert_path_nix_to_w32 ARG +# Convert path ARG from *nix to w32 format. Requires a wine environment and +# a working winepath. Returns result in func_to_host_file_result. +func_convert_path_nix_to_w32 () +{ + $debug_cmd + + func_to_host_path_result=$1 + if test -n "$1"; then + # See func_convert_path_msys_to_w32: + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" + func_to_host_path_result=$func_convert_core_path_wine_to_w32_result + func_convert_path_check : ";" \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" + fi +} +# end func_convert_path_nix_to_w32 + + +# func_convert_path_msys_to_cygwin ARG +# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. +# Returns result in func_to_host_file_result. +func_convert_path_msys_to_cygwin () +{ + $debug_cmd + + func_to_host_path_result=$1 + if test -n "$1"; then + # See func_convert_path_msys_to_w32: + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" + func_cygpath -u -p "$func_convert_core_msys_to_w32_result" + func_to_host_path_result=$func_cygpath_result + func_convert_path_check : : \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" : "$1" + fi +} +# end func_convert_path_msys_to_cygwin + + +# func_convert_path_nix_to_cygwin ARG +# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a +# a wine environment, working winepath, and LT_CYGPATH set. Returns result in +# func_to_host_file_result. +func_convert_path_nix_to_cygwin () +{ + $debug_cmd + + func_to_host_path_result=$1 + if test -n "$1"; then + # Remove leading and trailing path separator characters from + # ARG. msys behavior is inconsistent here, cygpath turns them + # into '.;' and ';.', and winepath ignores them completely. + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" + func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result" + func_to_host_path_result=$func_cygpath_result + func_convert_path_check : : \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" : "$1" + fi +} +# end func_convert_path_nix_to_cygwin + + +# func_dll_def_p FILE +# True iff FILE is a Windows DLL '.def' file. +# Keep in sync with _LT_DLL_DEF_P in libtool.m4 +func_dll_def_p () +{ + $debug_cmd + + func_dll_def_p_tmp=`$SED -n \ + -e 's/^[ ]*//' \ + -e '/^\(;.*\)*$/d' \ + -e 's/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p' \ + -e q \ + "$1"` + test DEF = "$func_dll_def_p_tmp" +} + + +# func_mode_compile arg... +func_mode_compile () +{ + $debug_cmd + + # Get the compilation command and the source file. + base_compile= + srcfile=$nonopt # always keep a non-empty value in "srcfile" + suppress_opt=yes + suppress_output= + arg_mode=normal + libobj= + later= + pie_flag= + + for arg + do + case $arg_mode in + arg ) + # do not "continue". Instead, add this to base_compile + lastarg=$arg + arg_mode=normal + ;; + + target ) + libobj=$arg + arg_mode=normal + continue + ;; + + normal ) + # Accept any command-line options. + case $arg in + -o) + test -n "$libobj" && \ + func_fatal_error "you cannot specify '-o' more than once" + arg_mode=target + continue + ;; + + -pie | -fpie | -fPIE) + func_append pie_flag " $arg" + continue + ;; + + -shared | -static | -prefer-pic | -prefer-non-pic) + func_append later " $arg" + continue + ;; + + -no-suppress) + suppress_opt=no + continue + ;; + + -Xcompiler) + arg_mode=arg # the next one goes into the "base_compile" arg list + continue # The current "srcfile" will either be retained or + ;; # replaced later. I would guess that would be a bug. + + -Wc,*) + func_stripname '-Wc,' '' "$arg" + args=$func_stripname_result + lastarg= + save_ifs=$IFS; IFS=, + for arg in $args; do + IFS=$save_ifs + func_append_quoted lastarg "$arg" + done + IFS=$save_ifs + func_stripname ' ' '' "$lastarg" + lastarg=$func_stripname_result + + # Add the arguments to base_compile. + func_append base_compile " $lastarg" + continue + ;; + + *) + # Accept the current argument as the source file. + # The previous "srcfile" becomes the current argument. + # + lastarg=$srcfile + srcfile=$arg + ;; + esac # case $arg + ;; + esac # case $arg_mode + + # Aesthetically quote the previous argument. + func_append_quoted base_compile "$lastarg" + done # for arg + + case $arg_mode in + arg) + func_fatal_error "you must specify an argument for -Xcompile" + ;; + target) + func_fatal_error "you must specify a target with '-o'" + ;; + *) + # Get the name of the library object. + test -z "$libobj" && { + func_basename "$srcfile" + libobj=$func_basename_result + } + ;; + esac + + # Recognize several different file suffixes. + # If the user specifies -o file.o, it is replaced with file.lo + case $libobj in + *.[cCFSifmso] | \ + *.ada | *.adb | *.ads | *.asm | \ + *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ + *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup) + func_xform "$libobj" + libobj=$func_xform_result + ;; + esac + + case $libobj in + *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; + *) + func_fatal_error "cannot determine name of library object from '$libobj'" + ;; + esac + + func_infer_tag $base_compile + + for arg in $later; do + case $arg in + -shared) + test yes = "$build_libtool_libs" \ + || func_fatal_configuration "cannot build a shared library" + build_old_libs=no + continue + ;; + + -static) + build_libtool_libs=no + build_old_libs=yes + continue + ;; + + -prefer-pic) + pic_mode=yes + continue + ;; + + -prefer-non-pic) + pic_mode=no + continue + ;; + esac + done + + func_quote_for_eval "$libobj" + test "X$libobj" != "X$func_quote_for_eval_result" \ + && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ + && func_warning "libobj name '$libobj' may not contain shell special characters." + func_dirname_and_basename "$obj" "/" "" + objname=$func_basename_result + xdir=$func_dirname_result + lobj=$xdir$objdir/$objname + + test -z "$base_compile" && \ + func_fatal_help "you must specify a compilation command" + + # Delete any leftover library objects. + if test yes = "$build_old_libs"; then + removelist="$obj $lobj $libobj ${libobj}T" + else + removelist="$lobj $libobj ${libobj}T" + fi + + # On Cygwin there's no "real" PIC flag so we must build both object types + case $host_os in + cygwin* | mingw* | pw32* | os2* | cegcc*) + pic_mode=default + ;; + esac + if test no = "$pic_mode" && test pass_all != "$deplibs_check_method"; then + # non-PIC code in shared libraries is not supported + pic_mode=default + fi + + # Calculate the filename of the output object if compiler does + # not support -o with -c + if test no = "$compiler_c_o"; then + output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.$objext + lockfile=$output_obj.lock + else + output_obj= + need_locks=no + lockfile= + fi + + # Lock this critical section if it is needed + # We use this script file to make the link, it avoids creating a new file + if test yes = "$need_locks"; then + until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do + func_echo "Waiting for $lockfile to be removed" + sleep 2 + done + elif test warn = "$need_locks"; then + if test -f "$lockfile"; then + $ECHO "\ +*** ERROR, $lockfile exists and contains: +`cat $lockfile 2>/dev/null` + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support '-c' and '-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + func_append removelist " $output_obj" + $ECHO "$srcfile" > "$lockfile" + fi + + $opt_dry_run || $RM $removelist + func_append removelist " $lockfile" + trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 + + func_to_tool_file "$srcfile" func_convert_file_msys_to_w32 + srcfile=$func_to_tool_file_result + func_quote_for_eval "$srcfile" + qsrcfile=$func_quote_for_eval_result + + # Only build a PIC object if we are building libtool libraries. + if test yes = "$build_libtool_libs"; then + # Without this assignment, base_compile gets emptied. + fbsd_hideous_sh_bug=$base_compile + + if test no != "$pic_mode"; then + command="$base_compile $qsrcfile $pic_flag" + else + # Don't build PIC code + command="$base_compile $qsrcfile" + fi + + func_mkdir_p "$xdir$objdir" + + if test -z "$output_obj"; then + # Place PIC objects in $objdir + func_append command " -o $lobj" + fi + + func_show_eval_locale "$command" \ + 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' + + if test warn = "$need_locks" && + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $ECHO "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support '-c' and '-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed, then go on to compile the next one + if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then + func_show_eval '$MV "$output_obj" "$lobj"' \ + 'error=$?; $opt_dry_run || $RM $removelist; exit $error' + fi + + # Allow error messages only from the first compilation. + if test yes = "$suppress_opt"; then + suppress_output=' >/dev/null 2>&1' + fi + fi + + # Only build a position-dependent object if we build old libraries. + if test yes = "$build_old_libs"; then + if test yes != "$pic_mode"; then + # Don't build PIC code + command="$base_compile $qsrcfile$pie_flag" + else + command="$base_compile $qsrcfile $pic_flag" + fi + if test yes = "$compiler_c_o"; then + func_append command " -o $obj" + fi + + # Suppress compiler output if we already did a PIC compilation. + func_append command "$suppress_output" + func_show_eval_locale "$command" \ + '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' + + if test warn = "$need_locks" && + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $ECHO "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support '-c' and '-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed + if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then + func_show_eval '$MV "$output_obj" "$obj"' \ + 'error=$?; $opt_dry_run || $RM $removelist; exit $error' + fi + fi + + $opt_dry_run || { + func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" + + # Unlock the critical section if it was locked + if test no != "$need_locks"; then + removelist=$lockfile + $RM "$lockfile" + fi + } + + exit $EXIT_SUCCESS +} + +$opt_help || { + test compile = "$opt_mode" && func_mode_compile ${1+"$@"} +} + +func_mode_help () +{ + # We need to display help for each of the modes. + case $opt_mode in + "") + # Generic help is extracted from the usage comments + # at the start of this file. + func_help + ;; + + clean) + $ECHO \ +"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... + +Remove files from the build directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed +to RM. + +If FILE is a libtool library, object or program, all the files associated +with it are deleted. Otherwise, only FILE itself is deleted using RM." + ;; + + compile) + $ECHO \ +"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE + +Compile a source file into a libtool library object. + +This mode accepts the following additional options: + + -o OUTPUT-FILE set the output file name to OUTPUT-FILE + -no-suppress do not suppress compiler output for multiple passes + -prefer-pic try to build PIC objects only + -prefer-non-pic try to build non-PIC objects only + -shared do not build a '.o' file suitable for static linking + -static only build a '.o' file suitable for static linking + -Wc,FLAG pass FLAG directly to the compiler + +COMPILE-COMMAND is a command to be used in creating a 'standard' object file +from the given SOURCEFILE. + +The output file name is determined by removing the directory component from +SOURCEFILE, then substituting the C source code suffix '.c' with the +library object suffix, '.lo'." + ;; + + execute) + $ECHO \ +"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... + +Automatically set library path, then run a program. + +This mode accepts the following additional options: + + -dlopen FILE add the directory containing FILE to the library path + +This mode sets the library path environment variable according to '-dlopen' +flags. + +If any of the ARGS are libtool executable wrappers, then they are translated +into their corresponding uninstalled binary, and any of their required library +directories are added to the library path. + +Then, COMMAND is executed, with ARGS as arguments." + ;; + + finish) + $ECHO \ +"Usage: $progname [OPTION]... --mode=finish [LIBDIR]... + +Complete the installation of libtool libraries. + +Each LIBDIR is a directory that contains libtool libraries. + +The commands that this mode executes may require superuser privileges. Use +the '--dry-run' option if you just want to see what would be executed." + ;; + + install) + $ECHO \ +"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... + +Install executables or libraries. + +INSTALL-COMMAND is the installation command. The first component should be +either the 'install' or 'cp' program. + +The following components of INSTALL-COMMAND are treated specially: + + -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation + +The rest of the components are interpreted as arguments to that command (only +BSD-compatible install options are recognized)." + ;; + + link) + $ECHO \ +"Usage: $progname [OPTION]... --mode=link LINK-COMMAND... + +Link object files or libraries together to form another library, or to +create an executable program. + +LINK-COMMAND is a command using the C compiler that you would use to create +a program from several object files. + +The following components of LINK-COMMAND are treated specially: + + -all-static do not do any dynamic linking at all + -avoid-version do not add a version suffix if possible + -bindir BINDIR specify path to binaries directory (for systems where + libraries must be found in the PATH setting at runtime) + -dlopen FILE '-dlpreopen' FILE if it cannot be dlopened at runtime + -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols + -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) + -export-symbols SYMFILE + try to export only the symbols listed in SYMFILE + -export-symbols-regex REGEX + try to export only the symbols matching REGEX + -LLIBDIR search LIBDIR for required installed libraries + -lNAME OUTPUT-FILE requires the installed library libNAME + -module build a library that can dlopened + -no-fast-install disable the fast-install mode + -no-install link a not-installable executable + -no-undefined declare that a library does not refer to external symbols + -o OUTPUT-FILE create OUTPUT-FILE from the specified objects + -objectlist FILE use a list of object files found in FILE to specify objects + -os2dllname NAME force a short DLL name on OS/2 (no effect on other OSes) + -precious-files-regex REGEX + don't remove output files matching REGEX + -release RELEASE specify package release information + -rpath LIBDIR the created library will eventually be installed in LIBDIR + -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries + -shared only do dynamic linking of libtool libraries + -shrext SUFFIX override the standard shared library file extension + -static do not do any dynamic linking of uninstalled libtool libraries + -static-libtool-libs + do not do any dynamic linking of libtool libraries + -version-info CURRENT[:REVISION[:AGE]] + specify library version info [each variable defaults to 0] + -weak LIBNAME declare that the target provides the LIBNAME interface + -Wc,FLAG + -Xcompiler FLAG pass linker-specific FLAG directly to the compiler + -Wl,FLAG + -Xlinker FLAG pass linker-specific FLAG directly to the linker + -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) + +All other options (arguments beginning with '-') are ignored. + +Every other argument is treated as a filename. Files ending in '.la' are +treated as uninstalled libtool libraries, other files are standard or library +object files. + +If the OUTPUT-FILE ends in '.la', then a libtool library is created, +only library objects ('.lo' files) may be specified, and '-rpath' is +required, except when creating a convenience library. + +If OUTPUT-FILE ends in '.a' or '.lib', then a standard library is created +using 'ar' and 'ranlib', or on Windows using 'lib'. + +If OUTPUT-FILE ends in '.lo' or '.$objext', then a reloadable object file +is created, otherwise an executable program is created." + ;; + + uninstall) + $ECHO \ +"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... + +Remove libraries from an installation directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed +to RM. + +If FILE is a libtool library, all the files associated with it are deleted. +Otherwise, only FILE itself is deleted using RM." + ;; + + *) + func_fatal_help "invalid operation mode '$opt_mode'" + ;; + esac + + echo + $ECHO "Try '$progname --help' for more information about other modes." +} + +# Now that we've collected a possible --mode arg, show help if necessary +if $opt_help; then + if test : = "$opt_help"; then + func_mode_help + else + { + func_help noexit + for opt_mode in compile link execute install finish uninstall clean; do + func_mode_help + done + } | $SED -n '1p; 2,$s/^Usage:/ or: /p' + { + func_help noexit + for opt_mode in compile link execute install finish uninstall clean; do + echo + func_mode_help + done + } | + $SED '1d + /^When reporting/,/^Report/{ + H + d + } + $x + /information about other modes/d + /more detailed .*MODE/d + s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/' + fi + exit $? +fi + + +# func_mode_execute arg... +func_mode_execute () +{ + $debug_cmd + + # The first argument is the command name. + cmd=$nonopt + test -z "$cmd" && \ + func_fatal_help "you must specify a COMMAND" + + # Handle -dlopen flags immediately. + for file in $opt_dlopen; do + test -f "$file" \ + || func_fatal_help "'$file' is not a file" + + dir= + case $file in + *.la) + func_resolve_sysroot "$file" + file=$func_resolve_sysroot_result + + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "'$lib' is not a valid libtool archive" + + # Read the libtool library. + dlname= + library_names= + func_source "$file" + + # Skip this library if it cannot be dlopened. + if test -z "$dlname"; then + # Warn if it was a shared library. + test -n "$library_names" && \ + func_warning "'$file' was not linked with '-export-dynamic'" + continue + fi + + func_dirname "$file" "" "." + dir=$func_dirname_result + + if test -f "$dir/$objdir/$dlname"; then + func_append dir "/$objdir" + else + if test ! -f "$dir/$dlname"; then + func_fatal_error "cannot find '$dlname' in '$dir' or '$dir/$objdir'" + fi + fi + ;; + + *.lo) + # Just add the directory containing the .lo file. + func_dirname "$file" "" "." + dir=$func_dirname_result + ;; + + *) + func_warning "'-dlopen' is ignored for non-libtool libraries and objects" + continue + ;; + esac + + # Get the absolute pathname. + absdir=`cd "$dir" && pwd` + test -n "$absdir" && dir=$absdir + + # Now add the directory to shlibpath_var. + if eval "test -z \"\$$shlibpath_var\""; then + eval "$shlibpath_var=\"\$dir\"" + else + eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" + fi + done + + # This variable tells wrapper scripts just to set shlibpath_var + # rather than running their programs. + libtool_execute_magic=$magic + + # Check if any of the arguments is a wrapper script. + args= + for file + do + case $file in + -* | *.la | *.lo ) ;; + *) + # Do a test to see if this is really a libtool program. + if func_ltwrapper_script_p "$file"; then + func_source "$file" + # Transform arg to wrapped name. + file=$progdir/$program + elif func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + func_source "$func_ltwrapper_scriptname_result" + # Transform arg to wrapped name. + file=$progdir/$program + fi + ;; + esac + # Quote arguments (to preserve shell metacharacters). + func_append_quoted args "$file" + done + + if $opt_dry_run; then + # Display what would be done. + if test -n "$shlibpath_var"; then + eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" + echo "export $shlibpath_var" + fi + $ECHO "$cmd$args" + exit $EXIT_SUCCESS + else + if test -n "$shlibpath_var"; then + # Export the shlibpath_var. + eval "export $shlibpath_var" + fi + + # Restore saved environment variables + for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES + do + eval "if test \"\${save_$lt_var+set}\" = set; then + $lt_var=\$save_$lt_var; export $lt_var + else + $lt_unset $lt_var + fi" + done + + # Now prepare to actually exec the command. + exec_cmd=\$cmd$args + fi +} + +test execute = "$opt_mode" && func_mode_execute ${1+"$@"} + + +# func_mode_finish arg... +func_mode_finish () +{ + $debug_cmd + + libs= + libdirs= + admincmds= + + for opt in "$nonopt" ${1+"$@"} + do + if test -d "$opt"; then + func_append libdirs " $opt" + + elif test -f "$opt"; then + if func_lalib_unsafe_p "$opt"; then + func_append libs " $opt" + else + func_warning "'$opt' is not a valid libtool archive" + fi + + else + func_fatal_error "invalid argument '$opt'" + fi + done + + if test -n "$libs"; then + if test -n "$lt_sysroot"; then + sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"` + sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;" + else + sysroot_cmd= + fi + + # Remove sysroot references + if $opt_dry_run; then + for lib in $libs; do + echo "removing references to $lt_sysroot and '=' prefixes from $lib" + done + else + tmpdir=`func_mktempdir` + for lib in $libs; do + $SED -e "$sysroot_cmd s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ + > $tmpdir/tmp-la + mv -f $tmpdir/tmp-la $lib + done + ${RM}r "$tmpdir" + fi + fi + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + for libdir in $libdirs; do + if test -n "$finish_cmds"; then + # Do each command in the finish commands. + func_execute_cmds "$finish_cmds" 'admincmds="$admincmds +'"$cmd"'"' + fi + if test -n "$finish_eval"; then + # Do the single finish_eval. + eval cmds=\"$finish_eval\" + $opt_dry_run || eval "$cmds" || func_append admincmds " + $cmds" + fi + done + fi + + # Exit here if they wanted silent mode. + $opt_quiet && exit $EXIT_SUCCESS + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + echo "----------------------------------------------------------------------" + echo "Libraries have been installed in:" + for libdir in $libdirs; do + $ECHO " $libdir" + done + echo + echo "If you ever happen to want to link against installed libraries" + echo "in a given directory, LIBDIR, you must either use libtool, and" + echo "specify the full pathname of the library, or use the '-LLIBDIR'" + echo "flag during linking and do at least one of the following:" + if test -n "$shlibpath_var"; then + echo " - add LIBDIR to the '$shlibpath_var' environment variable" + echo " during execution" + fi + if test -n "$runpath_var"; then + echo " - add LIBDIR to the '$runpath_var' environment variable" + echo " during linking" + fi + if test -n "$hardcode_libdir_flag_spec"; then + libdir=LIBDIR + eval flag=\"$hardcode_libdir_flag_spec\" + + $ECHO " - use the '$flag' linker flag" + fi + if test -n "$admincmds"; then + $ECHO " - have your system administrator run these commands:$admincmds" + fi + if test -f /etc/ld.so.conf; then + echo " - have your system administrator add LIBDIR to '/etc/ld.so.conf'" + fi + echo + + echo "See any operating system documentation about shared libraries for" + case $host in + solaris2.[6789]|solaris2.1[0-9]) + echo "more information, such as the ld(1), crle(1) and ld.so(8) manual" + echo "pages." + ;; + *) + echo "more information, such as the ld(1) and ld.so(8) manual pages." + ;; + esac + echo "----------------------------------------------------------------------" + fi + exit $EXIT_SUCCESS +} + +test finish = "$opt_mode" && func_mode_finish ${1+"$@"} + + +# func_mode_install arg... +func_mode_install () +{ + $debug_cmd + + # There may be an optional sh(1) argument at the beginning of + # install_prog (especially on Windows NT). + if test "$SHELL" = "$nonopt" || test /bin/sh = "$nonopt" || + # Allow the use of GNU shtool's install command. + case $nonopt in *shtool*) :;; *) false;; esac + then + # Aesthetically quote it. + func_quote_for_eval "$nonopt" + install_prog="$func_quote_for_eval_result " + arg=$1 + shift + else + install_prog= + arg=$nonopt + fi + + # The real first argument should be the name of the installation program. + # Aesthetically quote it. + func_quote_for_eval "$arg" + func_append install_prog "$func_quote_for_eval_result" + install_shared_prog=$install_prog + case " $install_prog " in + *[\\\ /]cp\ *) install_cp=: ;; + *) install_cp=false ;; + esac + + # We need to accept at least all the BSD install flags. + dest= + files= + opts= + prev= + install_type= + isdir=false + stripme= + no_mode=: + for arg + do + arg2= + if test -n "$dest"; then + func_append files " $dest" + dest=$arg + continue + fi + + case $arg in + -d) isdir=: ;; + -f) + if $install_cp; then :; else + prev=$arg + fi + ;; + -g | -m | -o) + prev=$arg + ;; + -s) + stripme=" -s" + continue + ;; + -*) + ;; + *) + # If the previous option needed an argument, then skip it. + if test -n "$prev"; then + if test X-m = "X$prev" && test -n "$install_override_mode"; then + arg2=$install_override_mode + no_mode=false + fi + prev= + else + dest=$arg + continue + fi + ;; + esac + + # Aesthetically quote the argument. + func_quote_for_eval "$arg" + func_append install_prog " $func_quote_for_eval_result" + if test -n "$arg2"; then + func_quote_for_eval "$arg2" + fi + func_append install_shared_prog " $func_quote_for_eval_result" + done + + test -z "$install_prog" && \ + func_fatal_help "you must specify an install program" + + test -n "$prev" && \ + func_fatal_help "the '$prev' option requires an argument" + + if test -n "$install_override_mode" && $no_mode; then + if $install_cp; then :; else + func_quote_for_eval "$install_override_mode" + func_append install_shared_prog " -m $func_quote_for_eval_result" + fi + fi + + if test -z "$files"; then + if test -z "$dest"; then + func_fatal_help "no file or destination specified" + else + func_fatal_help "you must specify a destination" + fi + fi + + # Strip any trailing slash from the destination. + func_stripname '' '/' "$dest" + dest=$func_stripname_result + + # Check to see that the destination is a directory. + test -d "$dest" && isdir=: + if $isdir; then + destdir=$dest + destname= + else + func_dirname_and_basename "$dest" "" "." + destdir=$func_dirname_result + destname=$func_basename_result + + # Not a directory, so check to see that there is only one file specified. + set dummy $files; shift + test "$#" -gt 1 && \ + func_fatal_help "'$dest' is not a directory" + fi + case $destdir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + for file in $files; do + case $file in + *.lo) ;; + *) + func_fatal_help "'$destdir' must be an absolute directory name" + ;; + esac + done + ;; + esac + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic=$magic + + staticlibs= + future_libdirs= + current_libdirs= + for file in $files; do + + # Do each installation. + case $file in + *.$libext) + # Do the static libraries later. + func_append staticlibs " $file" + ;; + + *.la) + func_resolve_sysroot "$file" + file=$func_resolve_sysroot_result + + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "'$file' is not a valid libtool archive" + + library_names= + old_library= + relink_command= + func_source "$file" + + # Add the libdir to current_libdirs if it is the destination. + if test "X$destdir" = "X$libdir"; then + case "$current_libdirs " in + *" $libdir "*) ;; + *) func_append current_libdirs " $libdir" ;; + esac + else + # Note the libdir as a future libdir. + case "$future_libdirs " in + *" $libdir "*) ;; + *) func_append future_libdirs " $libdir" ;; + esac + fi + + func_dirname "$file" "/" "" + dir=$func_dirname_result + func_append dir "$objdir" + + if test -n "$relink_command"; then + # Determine the prefix the user has applied to our future dir. + inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` + + # Don't allow the user to place us outside of our expected + # location b/c this prevents finding dependent libraries that + # are installed to the same prefix. + # At present, this check doesn't affect windows .dll's that + # are installed into $libdir/../bin (currently, that works fine) + # but it's something to keep an eye on. + test "$inst_prefix_dir" = "$destdir" && \ + func_fatal_error "error: cannot install '$file' to a directory not ending in $libdir" + + if test -n "$inst_prefix_dir"; then + # Stick the inst_prefix_dir data into the link command. + relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` + else + relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` + fi + + func_warning "relinking '$file'" + func_show_eval "$relink_command" \ + 'func_fatal_error "error: relink '\''$file'\'' with the above command before installing it"' + fi + + # See the names of the shared library. + set dummy $library_names; shift + if test -n "$1"; then + realname=$1 + shift + + srcname=$realname + test -n "$relink_command" && srcname=${realname}T + + # Install the shared library and build the symlinks. + func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ + 'exit $?' + tstripme=$stripme + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + case $realname in + *.dll.a) + tstripme= + ;; + esac + ;; + os2*) + case $realname in + *_dll.a) + tstripme= + ;; + esac + ;; + esac + if test -n "$tstripme" && test -n "$striplib"; then + func_show_eval "$striplib $destdir/$realname" 'exit $?' + fi + + if test "$#" -gt 0; then + # Delete the old symlinks, and create new ones. + # Try 'ln -sf' first, because the 'ln' binary might depend on + # the symlink we replace! Solaris /bin/ln does not understand -f, + # so we also need to try rm && ln -s. + for linkname + do + test "$linkname" != "$realname" \ + && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" + done + fi + + # Do each command in the postinstall commands. + lib=$destdir/$realname + func_execute_cmds "$postinstall_cmds" 'exit $?' + fi + + # Install the pseudo-library for information purposes. + func_basename "$file" + name=$func_basename_result + instname=$dir/${name}i + func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' + + # Maybe install the static library, too. + test -n "$old_library" && func_append staticlibs " $dir/$old_library" + ;; + + *.lo) + # Install (i.e. copy) a libtool object. + + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile=$destdir/$destname + else + func_basename "$file" + destfile=$func_basename_result + destfile=$destdir/$destfile + fi + + # Deduce the name of the destination old-style object file. + case $destfile in + *.lo) + func_lo2o "$destfile" + staticdest=$func_lo2o_result + ;; + *.$objext) + staticdest=$destfile + destfile= + ;; + *) + func_fatal_help "cannot copy a libtool object to '$destfile'" + ;; + esac + + # Install the libtool object if requested. + test -n "$destfile" && \ + func_show_eval "$install_prog $file $destfile" 'exit $?' + + # Install the old object if enabled. + if test yes = "$build_old_libs"; then + # Deduce the name of the old-style object file. + func_lo2o "$file" + staticobj=$func_lo2o_result + func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' + fi + exit $EXIT_SUCCESS + ;; + + *) + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile=$destdir/$destname + else + func_basename "$file" + destfile=$func_basename_result + destfile=$destdir/$destfile + fi + + # If the file is missing, and there is a .exe on the end, strip it + # because it is most likely a libtool script we actually want to + # install + stripped_ext= + case $file in + *.exe) + if test ! -f "$file"; then + func_stripname '' '.exe' "$file" + file=$func_stripname_result + stripped_ext=.exe + fi + ;; + esac + + # Do a test to see if this is really a libtool program. + case $host in + *cygwin* | *mingw*) + if func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + wrapper=$func_ltwrapper_scriptname_result + else + func_stripname '' '.exe' "$file" + wrapper=$func_stripname_result + fi + ;; + *) + wrapper=$file + ;; + esac + if func_ltwrapper_script_p "$wrapper"; then + notinst_deplibs= + relink_command= + + func_source "$wrapper" + + # Check the variables that should have been set. + test -z "$generated_by_libtool_version" && \ + func_fatal_error "invalid libtool wrapper script '$wrapper'" + + finalize=: + for lib in $notinst_deplibs; do + # Check to see that each library is installed. + libdir= + if test -f "$lib"; then + func_source "$lib" + fi + libfile=$libdir/`$ECHO "$lib" | $SED 's%^.*/%%g'` + if test -n "$libdir" && test ! -f "$libfile"; then + func_warning "'$lib' has not been installed in '$libdir'" + finalize=false + fi + done + + relink_command= + func_source "$wrapper" + + outputname= + if test no = "$fast_install" && test -n "$relink_command"; then + $opt_dry_run || { + if $finalize; then + tmpdir=`func_mktempdir` + func_basename "$file$stripped_ext" + file=$func_basename_result + outputname=$tmpdir/$file + # Replace the output file specification. + relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` + + $opt_quiet || { + func_quote_for_expand "$relink_command" + eval "func_echo $func_quote_for_expand_result" + } + if eval "$relink_command"; then : + else + func_error "error: relink '$file' with the above command before installing it" + $opt_dry_run || ${RM}r "$tmpdir" + continue + fi + file=$outputname + else + func_warning "cannot relink '$file'" + fi + } + else + # Install the binary that we compiled earlier. + file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"` + fi + fi + + # remove .exe since cygwin /usr/bin/install will append another + # one anyway + case $install_prog,$host in + */usr/bin/install*,*cygwin*) + case $file:$destfile in + *.exe:*.exe) + # this is ok + ;; + *.exe:*) + destfile=$destfile.exe + ;; + *:*.exe) + func_stripname '' '.exe' "$destfile" + destfile=$func_stripname_result + ;; + esac + ;; + esac + func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' + $opt_dry_run || if test -n "$outputname"; then + ${RM}r "$tmpdir" + fi + ;; + esac + done + + for file in $staticlibs; do + func_basename "$file" + name=$func_basename_result + + # Set up the ranlib parameters. + oldlib=$destdir/$name + func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 + tool_oldlib=$func_to_tool_file_result + + func_show_eval "$install_prog \$file \$oldlib" 'exit $?' + + if test -n "$stripme" && test -n "$old_striplib"; then + func_show_eval "$old_striplib $tool_oldlib" 'exit $?' + fi + + # Do each command in the postinstall commands. + func_execute_cmds "$old_postinstall_cmds" 'exit $?' + done + + test -n "$future_libdirs" && \ + func_warning "remember to run '$progname --finish$future_libdirs'" + + if test -n "$current_libdirs"; then + # Maybe just do a dry run. + $opt_dry_run && current_libdirs=" -n$current_libdirs" + exec_cmd='$SHELL "$progpath" $preserve_args --finish$current_libdirs' + else + exit $EXIT_SUCCESS + fi +} + +test install = "$opt_mode" && func_mode_install ${1+"$@"} + + +# func_generate_dlsyms outputname originator pic_p +# Extract symbols from dlprefiles and create ${outputname}S.o with +# a dlpreopen symbol table. +func_generate_dlsyms () +{ + $debug_cmd + + my_outputname=$1 + my_originator=$2 + my_pic_p=${3-false} + my_prefix=`$ECHO "$my_originator" | $SED 's%[^a-zA-Z0-9]%_%g'` + my_dlsyms= + + if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then + if test -n "$NM" && test -n "$global_symbol_pipe"; then + my_dlsyms=${my_outputname}S.c + else + func_error "not configured to extract global symbols from dlpreopened files" + fi + fi + + if test -n "$my_dlsyms"; then + case $my_dlsyms in + "") ;; + *.c) + # Discover the nlist of each of the dlfiles. + nlist=$output_objdir/$my_outputname.nm + + func_show_eval "$RM $nlist ${nlist}S ${nlist}T" + + # Parse the name list into a source file. + func_verbose "creating $output_objdir/$my_dlsyms" + + $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ +/* $my_dlsyms - symbol resolution table for '$my_outputname' dlsym emulation. */ +/* Generated by $PROGRAM (GNU $PACKAGE) $VERSION */ + +#ifdef __cplusplus +extern \"C\" { +#endif + +#if defined __GNUC__ && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) +#pragma GCC diagnostic ignored \"-Wstrict-prototypes\" +#endif + +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE +/* DATA imports from DLLs on WIN32 can't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT_DLSYM_CONST +#elif defined __osf__ +/* This system does not cope well with relocations in const data. */ +# define LT_DLSYM_CONST +#else +# define LT_DLSYM_CONST const +#endif + +#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0) + +/* External symbol declarations for the compiler. */\ +" + + if test yes = "$dlself"; then + func_verbose "generating symbol list for '$output'" + + $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" + + # Add our own program objects to the symbol list. + progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` + for progfile in $progfiles; do + func_to_tool_file "$progfile" func_convert_file_msys_to_w32 + func_verbose "extracting global C symbols from '$func_to_tool_file_result'" + $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'" + done + + if test -n "$exclude_expsyms"; then + $opt_dry_run || { + eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + } + fi + + if test -n "$export_symbols_regex"; then + $opt_dry_run || { + eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + } + fi + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + export_symbols=$output_objdir/$outputname.exp + $opt_dry_run || { + $RM $export_symbols + eval "$SED -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + case $host in + *cygwin* | *mingw* | *cegcc* ) + eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' + ;; + esac + } + else + $opt_dry_run || { + eval "$SED -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' + eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + case $host in + *cygwin* | *mingw* | *cegcc* ) + eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' + ;; + esac + } + fi + fi + + for dlprefile in $dlprefiles; do + func_verbose "extracting global C symbols from '$dlprefile'" + func_basename "$dlprefile" + name=$func_basename_result + case $host in + *cygwin* | *mingw* | *cegcc* ) + # if an import library, we need to obtain dlname + if func_win32_import_lib_p "$dlprefile"; then + func_tr_sh "$dlprefile" + eval "curr_lafile=\$libfile_$func_tr_sh_result" + dlprefile_dlbasename= + if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then + # Use subshell, to avoid clobbering current variable values + dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"` + if test -n "$dlprefile_dlname"; then + func_basename "$dlprefile_dlname" + dlprefile_dlbasename=$func_basename_result + else + # no lafile. user explicitly requested -dlpreopen . + $sharedlib_from_linklib_cmd "$dlprefile" + dlprefile_dlbasename=$sharedlib_from_linklib_result + fi + fi + $opt_dry_run || { + if test -n "$dlprefile_dlbasename"; then + eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"' + else + func_warning "Could not compute DLL name from $name" + eval '$ECHO ": $name " >> "$nlist"' + fi + func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | + $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" + } + else # not an import lib + $opt_dry_run || { + eval '$ECHO ": $name " >> "$nlist"' + func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" + } + fi + ;; + *) + $opt_dry_run || { + eval '$ECHO ": $name " >> "$nlist"' + func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" + } + ;; + esac + done + + $opt_dry_run || { + # Make sure we have at least an empty file. + test -f "$nlist" || : > "$nlist" + + if test -n "$exclude_expsyms"; then + $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T + $MV "$nlist"T "$nlist" + fi + + # Try sorting and uniquifying the output. + if $GREP -v "^: " < "$nlist" | + if sort -k 3 /dev/null 2>&1; then + sort -k 3 + else + sort +2 + fi | + uniq > "$nlist"S; then + : + else + $GREP -v "^: " < "$nlist" > "$nlist"S + fi + + if test -f "$nlist"S; then + eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' + else + echo '/* NONE */' >> "$output_objdir/$my_dlsyms" + fi + + func_show_eval '$RM "${nlist}I"' + if test -n "$global_symbol_to_import"; then + eval "$global_symbol_to_import"' < "$nlist"S > "$nlist"I' + fi + + echo >> "$output_objdir/$my_dlsyms" "\ + +/* The mapping between symbol names and symbols. */ +typedef struct { + const char *name; + void *address; +} lt_dlsymlist; +extern LT_DLSYM_CONST lt_dlsymlist +lt_${my_prefix}_LTX_preloaded_symbols[];\ +" + + if test -s "$nlist"I; then + echo >> "$output_objdir/$my_dlsyms" "\ +static void lt_syminit(void) +{ + LT_DLSYM_CONST lt_dlsymlist *symbol = lt_${my_prefix}_LTX_preloaded_symbols; + for (; symbol->name; ++symbol) + {" + $SED 's/.*/ if (STREQ (symbol->name, \"&\")) symbol->address = (void *) \&&;/' < "$nlist"I >> "$output_objdir/$my_dlsyms" + echo >> "$output_objdir/$my_dlsyms" "\ + } +}" + fi + echo >> "$output_objdir/$my_dlsyms" "\ +LT_DLSYM_CONST lt_dlsymlist +lt_${my_prefix}_LTX_preloaded_symbols[] = +{ {\"$my_originator\", (void *) 0}," + + if test -s "$nlist"I; then + echo >> "$output_objdir/$my_dlsyms" "\ + {\"@INIT@\", (void *) <_syminit}," + fi + + case $need_lib_prefix in + no) + eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" + ;; + *) + eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" + ;; + esac + echo >> "$output_objdir/$my_dlsyms" "\ + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt_${my_prefix}_LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif\ +" + } # !$opt_dry_run + + pic_flag_for_symtable= + case "$compile_command " in + *" -static "*) ;; + *) + case $host in + # compiling the symbol table file with pic_flag works around + # a FreeBSD bug that causes programs to crash when -lm is + # linked before any other PIC object. But we must not use + # pic_flag when linking with -static. The problem exists in + # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. + *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) + pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; + *-*-hpux*) + pic_flag_for_symtable=" $pic_flag" ;; + *) + $my_pic_p && pic_flag_for_symtable=" $pic_flag" + ;; + esac + ;; + esac + symtab_cflags= + for arg in $LTCFLAGS; do + case $arg in + -pie | -fpie | -fPIE) ;; + *) func_append symtab_cflags " $arg" ;; + esac + done + + # Now compile the dynamic symbol file. + func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' + + # Clean up the generated files. + func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T" "${nlist}I"' + + # Transform the symbol file into the correct name. + symfileobj=$output_objdir/${my_outputname}S.$objext + case $host in + *cygwin* | *mingw* | *cegcc* ) + if test -f "$output_objdir/$my_outputname.def"; then + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + else + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` + fi + ;; + *) + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` + ;; + esac + ;; + *) + func_fatal_error "unknown suffix for '$my_dlsyms'" + ;; + esac + else + # We keep going just in case the user didn't refer to + # lt_preloaded_symbols. The linker will fail if global_symbol_pipe + # really was required. + + # Nullify the symbol file. + compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"` + fi +} + +# func_cygming_gnu_implib_p ARG +# This predicate returns with zero status (TRUE) if +# ARG is a GNU/binutils-style import library. Returns +# with nonzero status (FALSE) otherwise. +func_cygming_gnu_implib_p () +{ + $debug_cmd + + func_to_tool_file "$1" func_convert_file_msys_to_w32 + func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` + test -n "$func_cygming_gnu_implib_tmp" +} + +# func_cygming_ms_implib_p ARG +# This predicate returns with zero status (TRUE) if +# ARG is an MS-style import library. Returns +# with nonzero status (FALSE) otherwise. +func_cygming_ms_implib_p () +{ + $debug_cmd + + func_to_tool_file "$1" func_convert_file_msys_to_w32 + func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` + test -n "$func_cygming_ms_implib_tmp" +} + +# func_win32_libid arg +# return the library type of file 'arg' +# +# Need a lot of goo to handle *both* DLLs and import libs +# Has to be a shell function in order to 'eat' the argument +# that is supplied when $file_magic_command is called. +# Despite the name, also deal with 64 bit binaries. +func_win32_libid () +{ + $debug_cmd + + win32_libid_type=unknown + win32_fileres=`file -L $1 2>/dev/null` + case $win32_fileres in + *ar\ archive\ import\ library*) # definitely import + win32_libid_type="x86 archive import" + ;; + *ar\ archive*) # could be an import, or static + # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. + if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | + $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then + case $nm_interface in + "MS dumpbin") + if func_cygming_ms_implib_p "$1" || + func_cygming_gnu_implib_p "$1" + then + win32_nmres=import + else + win32_nmres= + fi + ;; + *) + func_to_tool_file "$1" func_convert_file_msys_to_w32 + win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | + $SED -n -e ' + 1,100{ + / I /{ + s|.*|import| + p + q + } + }'` + ;; + esac + case $win32_nmres in + import*) win32_libid_type="x86 archive import";; + *) win32_libid_type="x86 archive static";; + esac + fi + ;; + *DLL*) + win32_libid_type="x86 DLL" + ;; + *executable*) # but shell scripts are "executable" too... + case $win32_fileres in + *MS\ Windows\ PE\ Intel*) + win32_libid_type="x86 DLL" + ;; + esac + ;; + esac + $ECHO "$win32_libid_type" +} + +# func_cygming_dll_for_implib ARG +# +# Platform-specific function to extract the +# name of the DLL associated with the specified +# import library ARG. +# Invoked by eval'ing the libtool variable +# $sharedlib_from_linklib_cmd +# Result is available in the variable +# $sharedlib_from_linklib_result +func_cygming_dll_for_implib () +{ + $debug_cmd + + sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"` +} + +# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs +# +# The is the core of a fallback implementation of a +# platform-specific function to extract the name of the +# DLL associated with the specified import library LIBNAME. +# +# SECTION_NAME is either .idata$6 or .idata$7, depending +# on the platform and compiler that created the implib. +# +# Echos the name of the DLL associated with the +# specified import library. +func_cygming_dll_for_implib_fallback_core () +{ + $debug_cmd + + match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"` + $OBJDUMP -s --section "$1" "$2" 2>/dev/null | + $SED '/^Contents of section '"$match_literal"':/{ + # Place marker at beginning of archive member dllname section + s/.*/====MARK====/ + p + d + } + # These lines can sometimes be longer than 43 characters, but + # are always uninteresting + /:[ ]*file format pe[i]\{,1\}-/d + /^In archive [^:]*:/d + # Ensure marker is printed + /^====MARK====/p + # Remove all lines with less than 43 characters + /^.\{43\}/!d + # From remaining lines, remove first 43 characters + s/^.\{43\}//' | + $SED -n ' + # Join marker and all lines until next marker into a single line + /^====MARK====/ b para + H + $ b para + b + :para + x + s/\n//g + # Remove the marker + s/^====MARK====// + # Remove trailing dots and whitespace + s/[\. \t]*$// + # Print + /./p' | + # we now have a list, one entry per line, of the stringified + # contents of the appropriate section of all members of the + # archive that possess that section. Heuristic: eliminate + # all those that have a first or second character that is + # a '.' (that is, objdump's representation of an unprintable + # character.) This should work for all archives with less than + # 0x302f exports -- but will fail for DLLs whose name actually + # begins with a literal '.' or a single character followed by + # a '.'. + # + # Of those that remain, print the first one. + $SED -e '/^\./d;/^.\./d;q' +} + +# func_cygming_dll_for_implib_fallback ARG +# Platform-specific function to extract the +# name of the DLL associated with the specified +# import library ARG. +# +# This fallback implementation is for use when $DLLTOOL +# does not support the --identify-strict option. +# Invoked by eval'ing the libtool variable +# $sharedlib_from_linklib_cmd +# Result is available in the variable +# $sharedlib_from_linklib_result +func_cygming_dll_for_implib_fallback () +{ + $debug_cmd + + if func_cygming_gnu_implib_p "$1"; then + # binutils import library + sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"` + elif func_cygming_ms_implib_p "$1"; then + # ms-generated import library + sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"` + else + # unknown + sharedlib_from_linklib_result= + fi +} + + +# func_extract_an_archive dir oldlib +func_extract_an_archive () +{ + $debug_cmd + + f_ex_an_ar_dir=$1; shift + f_ex_an_ar_oldlib=$1 + if test yes = "$lock_old_archive_extraction"; then + lockfile=$f_ex_an_ar_oldlib.lock + until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do + func_echo "Waiting for $lockfile to be removed" + sleep 2 + done + fi + func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ + 'stat=$?; rm -f "$lockfile"; exit $stat' + if test yes = "$lock_old_archive_extraction"; then + $opt_dry_run || rm -f "$lockfile" + fi + if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then + : + else + func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" + fi +} + + +# func_extract_archives gentop oldlib ... +func_extract_archives () +{ + $debug_cmd + + my_gentop=$1; shift + my_oldlibs=${1+"$@"} + my_oldobjs= + my_xlib= + my_xabs= + my_xdir= + + for my_xlib in $my_oldlibs; do + # Extract the objects. + case $my_xlib in + [\\/]* | [A-Za-z]:[\\/]*) my_xabs=$my_xlib ;; + *) my_xabs=`pwd`"/$my_xlib" ;; + esac + func_basename "$my_xlib" + my_xlib=$func_basename_result + my_xlib_u=$my_xlib + while :; do + case " $extracted_archives " in + *" $my_xlib_u "*) + func_arith $extracted_serial + 1 + extracted_serial=$func_arith_result + my_xlib_u=lt$extracted_serial-$my_xlib ;; + *) break ;; + esac + done + extracted_archives="$extracted_archives $my_xlib_u" + my_xdir=$my_gentop/$my_xlib_u + + func_mkdir_p "$my_xdir" + + case $host in + *-darwin*) + func_verbose "Extracting $my_xabs" + # Do not bother doing anything if just a dry run + $opt_dry_run || { + darwin_orig_dir=`pwd` + cd $my_xdir || exit $? + darwin_archive=$my_xabs + darwin_curdir=`pwd` + func_basename "$darwin_archive" + darwin_base_archive=$func_basename_result + darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` + if test -n "$darwin_arches"; then + darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` + darwin_arch= + func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" + for darwin_arch in $darwin_arches; do + func_mkdir_p "unfat-$$/$darwin_base_archive-$darwin_arch" + $LIPO -thin $darwin_arch -output "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" "$darwin_archive" + cd "unfat-$$/$darwin_base_archive-$darwin_arch" + func_extract_an_archive "`pwd`" "$darwin_base_archive" + cd "$darwin_curdir" + $RM "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" + done # $darwin_arches + ## Okay now we've a bunch of thin objects, gotta fatten them up :) + darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$sed_basename" | sort -u` + darwin_file= + darwin_files= + for darwin_file in $darwin_filelist; do + darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP` + $LIPO -create -output "$darwin_file" $darwin_files + done # $darwin_filelist + $RM -rf unfat-$$ + cd "$darwin_orig_dir" + else + cd $darwin_orig_dir + func_extract_an_archive "$my_xdir" "$my_xabs" + fi # $darwin_arches + } # !$opt_dry_run + ;; + *) + func_extract_an_archive "$my_xdir" "$my_xabs" + ;; + esac + my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` + done + + func_extract_archives_result=$my_oldobjs +} + + +# func_emit_wrapper [arg=no] +# +# Emit a libtool wrapper script on stdout. +# Don't directly open a file because we may want to +# incorporate the script contents within a cygwin/mingw +# wrapper executable. Must ONLY be called from within +# func_mode_link because it depends on a number of variables +# set therein. +# +# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR +# variable will take. If 'yes', then the emitted script +# will assume that the directory where it is stored is +# the $objdir directory. This is a cygwin/mingw-specific +# behavior. +func_emit_wrapper () +{ + func_emit_wrapper_arg1=${1-no} + + $ECHO "\ +#! $SHELL + +# $output - temporary wrapper script for $objdir/$outputname +# Generated by $PROGRAM (GNU $PACKAGE) $VERSION +# +# The $output program cannot be directly executed until all the libtool +# libraries that it depends on are installed. +# +# This wrapper script should never be moved out of the build directory. +# If it is, it will not operate correctly. + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +sed_quote_subst='$sed_quote_subst' + +# Be Bourne compatible +if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +relink_command=\"$relink_command\" + +# This environment variable determines our operation mode. +if test \"\$libtool_install_magic\" = \"$magic\"; then + # install mode needs the following variables: + generated_by_libtool_version='$macro_version' + notinst_deplibs='$notinst_deplibs' +else + # When we are sourced in execute mode, \$file and \$ECHO are already set. + if test \"\$libtool_execute_magic\" != \"$magic\"; then + file=\"\$0\"" + + qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` + $ECHO "\ + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$1 +_LTECHO_EOF' +} + ECHO=\"$qECHO\" + fi + +# Very basic option parsing. These options are (a) specific to +# the libtool wrapper, (b) are identical between the wrapper +# /script/ and the wrapper /executable/ that is used only on +# windows platforms, and (c) all begin with the string "--lt-" +# (application programs are unlikely to have options that match +# this pattern). +# +# There are only two supported options: --lt-debug and +# --lt-dump-script. There is, deliberately, no --lt-help. +# +# The first argument to this parsing function should be the +# script's $0 value, followed by "$@". +lt_option_debug= +func_parse_lt_options () +{ + lt_script_arg0=\$0 + shift + for lt_opt + do + case \"\$lt_opt\" in + --lt-debug) lt_option_debug=1 ;; + --lt-dump-script) + lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\` + test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=. + lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\` + cat \"\$lt_dump_D/\$lt_dump_F\" + exit 0 + ;; + --lt-*) + \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2 + exit 1 + ;; + esac + done + + # Print the debug banner immediately: + if test -n \"\$lt_option_debug\"; then + echo \"$outputname:$output:\$LINENO: libtool wrapper (GNU $PACKAGE) $VERSION\" 1>&2 + fi +} + +# Used when --lt-debug. Prints its arguments to stdout +# (redirection is the responsibility of the caller) +func_lt_dump_args () +{ + lt_dump_args_N=1; + for lt_arg + do + \$ECHO \"$outputname:$output:\$LINENO: newargv[\$lt_dump_args_N]: \$lt_arg\" + lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` + done +} + +# Core function for launching the target application +func_exec_program_core () +{ +" + case $host in + # Backslashes separate directories on plain windows + *-*-mingw | *-*-os2* | *-cegcc*) + $ECHO "\ + if test -n \"\$lt_option_debug\"; then + \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir\\\\\$program\" 1>&2 + func_lt_dump_args \${1+\"\$@\"} 1>&2 + fi + exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} +" + ;; + + *) + $ECHO "\ + if test -n \"\$lt_option_debug\"; then + \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir/\$program\" 1>&2 + func_lt_dump_args \${1+\"\$@\"} 1>&2 + fi + exec \"\$progdir/\$program\" \${1+\"\$@\"} +" + ;; + esac + $ECHO "\ + \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 + exit 1 +} + +# A function to encapsulate launching the target application +# Strips options in the --lt-* namespace from \$@ and +# launches target application with the remaining arguments. +func_exec_program () +{ + case \" \$* \" in + *\\ --lt-*) + for lt_wr_arg + do + case \$lt_wr_arg in + --lt-*) ;; + *) set x \"\$@\" \"\$lt_wr_arg\"; shift;; + esac + shift + done ;; + esac + func_exec_program_core \${1+\"\$@\"} +} + + # Parse options + func_parse_lt_options \"\$0\" \${1+\"\$@\"} + + # Find the directory that this script lives in. + thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\` + test \"x\$thisdir\" = \"x\$file\" && thisdir=. + + # Follow symbolic links until we get to the real thisdir. + file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\` + while test -n \"\$file\"; do + destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\` + + # If there was a directory component, then change thisdir. + if test \"x\$destdir\" != \"x\$file\"; then + case \"\$destdir\" in + [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; + *) thisdir=\"\$thisdir/\$destdir\" ;; + esac + fi + + file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\` + file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\` + done + + # Usually 'no', except on cygwin/mingw when embedded into + # the cwrapper. + WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 + if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then + # special case for '.' + if test \"\$thisdir\" = \".\"; then + thisdir=\`pwd\` + fi + # remove .libs from thisdir + case \"\$thisdir\" in + *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;; + $objdir ) thisdir=. ;; + esac + fi + + # Try to get the absolute directory name. + absdir=\`cd \"\$thisdir\" && pwd\` + test -n \"\$absdir\" && thisdir=\"\$absdir\" +" + + if test yes = "$fast_install"; then + $ECHO "\ + program=lt-'$outputname'$exeext + progdir=\"\$thisdir/$objdir\" + + if test ! -f \"\$progdir/\$program\" || + { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | $SED 1q\`; \\ + test \"X\$file\" != \"X\$progdir/\$program\"; }; then + + file=\"\$\$-\$program\" + + if test ! -d \"\$progdir\"; then + $MKDIR \"\$progdir\" + else + $RM \"\$progdir/\$file\" + fi" + + $ECHO "\ + + # relink executable if necessary + if test -n \"\$relink_command\"; then + if relink_command_output=\`eval \$relink_command 2>&1\`; then : + else + \$ECHO \"\$relink_command_output\" >&2 + $RM \"\$progdir/\$file\" + exit 1 + fi + fi + + $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || + { $RM \"\$progdir/\$program\"; + $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } + $RM \"\$progdir/\$file\" + fi" + else + $ECHO "\ + program='$outputname' + progdir=\"\$thisdir/$objdir\" +" + fi + + $ECHO "\ + + if test -f \"\$progdir/\$program\"; then" + + # fixup the dll searchpath if we need to. + # + # Fix the DLL searchpath if we need to. Do this before prepending + # to shlibpath, because on Windows, both are PATH and uninstalled + # libraries must come first. + if test -n "$dllsearchpath"; then + $ECHO "\ + # Add the dll search path components to the executable PATH + PATH=$dllsearchpath:\$PATH +" + fi + + # Export our shlibpath_var if we have one. + if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then + $ECHO "\ + # Add our own library path to $shlibpath_var + $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" + + # Some systems cannot cope with colon-terminated $shlibpath_var + # The second colon is a workaround for a bug in BeOS R4 sed + $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\` + + export $shlibpath_var +" + fi + + $ECHO "\ + if test \"\$libtool_execute_magic\" != \"$magic\"; then + # Run the actual program with our arguments. + func_exec_program \${1+\"\$@\"} + fi + else + # The program doesn't exist. + \$ECHO \"\$0: error: '\$progdir/\$program' does not exist\" 1>&2 + \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 + \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 + exit 1 + fi +fi\ +" +} + + +# func_emit_cwrapperexe_src +# emit the source code for a wrapper executable on stdout +# Must ONLY be called from within func_mode_link because +# it depends on a number of variable set therein. +func_emit_cwrapperexe_src () +{ + cat < +#include +#ifdef _MSC_VER +# include +# include +# include +#else +# include +# include +# ifdef __CYGWIN__ +# include +# endif +#endif +#include +#include +#include +#include +#include +#include +#include +#include + +#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0) + +/* declarations of non-ANSI functions */ +#if defined __MINGW32__ +# ifdef __STRICT_ANSI__ +int _putenv (const char *); +# endif +#elif defined __CYGWIN__ +# ifdef __STRICT_ANSI__ +char *realpath (const char *, char *); +int putenv (char *); +int setenv (const char *, const char *, int); +# endif +/* #elif defined other_platform || defined ... */ +#endif + +/* portability defines, excluding path handling macros */ +#if defined _MSC_VER +# define setmode _setmode +# define stat _stat +# define chmod _chmod +# define getcwd _getcwd +# define putenv _putenv +# define S_IXUSR _S_IEXEC +#elif defined __MINGW32__ +# define setmode _setmode +# define stat _stat +# define chmod _chmod +# define getcwd _getcwd +# define putenv _putenv +#elif defined __CYGWIN__ +# define HAVE_SETENV +# define FOPEN_WB "wb" +/* #elif defined other platforms ... */ +#endif + +#if defined PATH_MAX +# define LT_PATHMAX PATH_MAX +#elif defined MAXPATHLEN +# define LT_PATHMAX MAXPATHLEN +#else +# define LT_PATHMAX 1024 +#endif + +#ifndef S_IXOTH +# define S_IXOTH 0 +#endif +#ifndef S_IXGRP +# define S_IXGRP 0 +#endif + +/* path handling portability macros */ +#ifndef DIR_SEPARATOR +# define DIR_SEPARATOR '/' +# define PATH_SEPARATOR ':' +#endif + +#if defined _WIN32 || defined __MSDOS__ || defined __DJGPP__ || \ + defined __OS2__ +# define HAVE_DOS_BASED_FILE_SYSTEM +# define FOPEN_WB "wb" +# ifndef DIR_SEPARATOR_2 +# define DIR_SEPARATOR_2 '\\' +# endif +# ifndef PATH_SEPARATOR_2 +# define PATH_SEPARATOR_2 ';' +# endif +#endif + +#ifndef DIR_SEPARATOR_2 +# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) +#else /* DIR_SEPARATOR_2 */ +# define IS_DIR_SEPARATOR(ch) \ + (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) +#endif /* DIR_SEPARATOR_2 */ + +#ifndef PATH_SEPARATOR_2 +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) +#else /* PATH_SEPARATOR_2 */ +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) +#endif /* PATH_SEPARATOR_2 */ + +#ifndef FOPEN_WB +# define FOPEN_WB "w" +#endif +#ifndef _O_BINARY +# define _O_BINARY 0 +#endif + +#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) +#define XFREE(stale) do { \ + if (stale) { free (stale); stale = 0; } \ +} while (0) + +#if defined LT_DEBUGWRAPPER +static int lt_debug = 1; +#else +static int lt_debug = 0; +#endif + +const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */ + +void *xmalloc (size_t num); +char *xstrdup (const char *string); +const char *base_name (const char *name); +char *find_executable (const char *wrapper); +char *chase_symlinks (const char *pathspec); +int make_executable (const char *path); +int check_executable (const char *path); +char *strendzap (char *str, const char *pat); +void lt_debugprintf (const char *file, int line, const char *fmt, ...); +void lt_fatal (const char *file, int line, const char *message, ...); +static const char *nonnull (const char *s); +static const char *nonempty (const char *s); +void lt_setenv (const char *name, const char *value); +char *lt_extend_str (const char *orig_value, const char *add, int to_end); +void lt_update_exe_path (const char *name, const char *value); +void lt_update_lib_path (const char *name, const char *value); +char **prepare_spawn (char **argv); +void lt_dump_script (FILE *f); +EOF + + cat <= 0) + && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) + return 1; + else + return 0; +} + +int +make_executable (const char *path) +{ + int rval = 0; + struct stat st; + + lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n", + nonempty (path)); + if ((!path) || (!*path)) + return 0; + + if (stat (path, &st) >= 0) + { + rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); + } + return rval; +} + +/* Searches for the full path of the wrapper. Returns + newly allocated full path name if found, NULL otherwise + Does not chase symlinks, even on platforms that support them. +*/ +char * +find_executable (const char *wrapper) +{ + int has_slash = 0; + const char *p; + const char *p_next; + /* static buffer for getcwd */ + char tmp[LT_PATHMAX + 1]; + size_t tmp_len; + char *concat_name; + + lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n", + nonempty (wrapper)); + + if ((wrapper == NULL) || (*wrapper == '\0')) + return NULL; + + /* Absolute path? */ +#if defined HAVE_DOS_BASED_FILE_SYSTEM + if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') + { + concat_name = xstrdup (wrapper); + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } + else + { +#endif + if (IS_DIR_SEPARATOR (wrapper[0])) + { + concat_name = xstrdup (wrapper); + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } +#if defined HAVE_DOS_BASED_FILE_SYSTEM + } +#endif + + for (p = wrapper; *p; p++) + if (*p == '/') + { + has_slash = 1; + break; + } + if (!has_slash) + { + /* no slashes; search PATH */ + const char *path = getenv ("PATH"); + if (path != NULL) + { + for (p = path; *p; p = p_next) + { + const char *q; + size_t p_len; + for (q = p; *q; q++) + if (IS_PATH_SEPARATOR (*q)) + break; + p_len = (size_t) (q - p); + p_next = (*q == '\0' ? q : q + 1); + if (p_len == 0) + { + /* empty path: current directory */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", + nonnull (strerror (errno))); + tmp_len = strlen (tmp); + concat_name = + XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + } + else + { + concat_name = + XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, p, p_len); + concat_name[p_len] = '/'; + strcpy (concat_name + p_len + 1, wrapper); + } + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } + } + /* not found in PATH; assume curdir */ + } + /* Relative path | not found in path: prepend cwd */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", + nonnull (strerror (errno))); + tmp_len = strlen (tmp); + concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + return NULL; +} + +char * +chase_symlinks (const char *pathspec) +{ +#ifndef S_ISLNK + return xstrdup (pathspec); +#else + char buf[LT_PATHMAX]; + struct stat s; + char *tmp_pathspec = xstrdup (pathspec); + char *p; + int has_symlinks = 0; + while (strlen (tmp_pathspec) && !has_symlinks) + { + lt_debugprintf (__FILE__, __LINE__, + "checking path component for symlinks: %s\n", + tmp_pathspec); + if (lstat (tmp_pathspec, &s) == 0) + { + if (S_ISLNK (s.st_mode) != 0) + { + has_symlinks = 1; + break; + } + + /* search backwards for last DIR_SEPARATOR */ + p = tmp_pathspec + strlen (tmp_pathspec) - 1; + while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) + p--; + if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) + { + /* no more DIR_SEPARATORS left */ + break; + } + *p = '\0'; + } + else + { + lt_fatal (__FILE__, __LINE__, + "error accessing file \"%s\": %s", + tmp_pathspec, nonnull (strerror (errno))); + } + } + XFREE (tmp_pathspec); + + if (!has_symlinks) + { + return xstrdup (pathspec); + } + + tmp_pathspec = realpath (pathspec, buf); + if (tmp_pathspec == 0) + { + lt_fatal (__FILE__, __LINE__, + "could not follow symlinks for %s", pathspec); + } + return xstrdup (tmp_pathspec); +#endif +} + +char * +strendzap (char *str, const char *pat) +{ + size_t len, patlen; + + assert (str != NULL); + assert (pat != NULL); + + len = strlen (str); + patlen = strlen (pat); + + if (patlen <= len) + { + str += len - patlen; + if (STREQ (str, pat)) + *str = '\0'; + } + return str; +} + +void +lt_debugprintf (const char *file, int line, const char *fmt, ...) +{ + va_list args; + if (lt_debug) + { + (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line); + va_start (args, fmt); + (void) vfprintf (stderr, fmt, args); + va_end (args); + } +} + +static void +lt_error_core (int exit_status, const char *file, + int line, const char *mode, + const char *message, va_list ap) +{ + fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode); + vfprintf (stderr, message, ap); + fprintf (stderr, ".\n"); + + if (exit_status >= 0) + exit (exit_status); +} + +void +lt_fatal (const char *file, int line, const char *message, ...) +{ + va_list ap; + va_start (ap, message); + lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap); + va_end (ap); +} + +static const char * +nonnull (const char *s) +{ + return s ? s : "(null)"; +} + +static const char * +nonempty (const char *s) +{ + return (s && !*s) ? "(empty)" : nonnull (s); +} + +void +lt_setenv (const char *name, const char *value) +{ + lt_debugprintf (__FILE__, __LINE__, + "(lt_setenv) setting '%s' to '%s'\n", + nonnull (name), nonnull (value)); + { +#ifdef HAVE_SETENV + /* always make a copy, for consistency with !HAVE_SETENV */ + char *str = xstrdup (value); + setenv (name, str, 1); +#else + size_t len = strlen (name) + 1 + strlen (value) + 1; + char *str = XMALLOC (char, len); + sprintf (str, "%s=%s", name, value); + if (putenv (str) != EXIT_SUCCESS) + { + XFREE (str); + } +#endif + } +} + +char * +lt_extend_str (const char *orig_value, const char *add, int to_end) +{ + char *new_value; + if (orig_value && *orig_value) + { + size_t orig_value_len = strlen (orig_value); + size_t add_len = strlen (add); + new_value = XMALLOC (char, add_len + orig_value_len + 1); + if (to_end) + { + strcpy (new_value, orig_value); + strcpy (new_value + orig_value_len, add); + } + else + { + strcpy (new_value, add); + strcpy (new_value + add_len, orig_value); + } + } + else + { + new_value = xstrdup (add); + } + return new_value; +} + +void +lt_update_exe_path (const char *name, const char *value) +{ + lt_debugprintf (__FILE__, __LINE__, + "(lt_update_exe_path) modifying '%s' by prepending '%s'\n", + nonnull (name), nonnull (value)); + + if (name && *name && value && *value) + { + char *new_value = lt_extend_str (getenv (name), value, 0); + /* some systems can't cope with a ':'-terminated path #' */ + size_t len = strlen (new_value); + while ((len > 0) && IS_PATH_SEPARATOR (new_value[len-1])) + { + new_value[--len] = '\0'; + } + lt_setenv (name, new_value); + XFREE (new_value); + } +} + +void +lt_update_lib_path (const char *name, const char *value) +{ + lt_debugprintf (__FILE__, __LINE__, + "(lt_update_lib_path) modifying '%s' by prepending '%s'\n", + nonnull (name), nonnull (value)); + + if (name && *name && value && *value) + { + char *new_value = lt_extend_str (getenv (name), value, 0); + lt_setenv (name, new_value); + XFREE (new_value); + } +} + +EOF + case $host_os in + mingw*) + cat <<"EOF" + +/* Prepares an argument vector before calling spawn(). + Note that spawn() does not by itself call the command interpreter + (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") : + ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO); + GetVersionEx(&v); + v.dwPlatformId == VER_PLATFORM_WIN32_NT; + }) ? "cmd.exe" : "command.com"). + Instead it simply concatenates the arguments, separated by ' ', and calls + CreateProcess(). We must quote the arguments since Win32 CreateProcess() + interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a + special way: + - Space and tab are interpreted as delimiters. They are not treated as + delimiters if they are surrounded by double quotes: "...". + - Unescaped double quotes are removed from the input. Their only effect is + that within double quotes, space and tab are treated like normal + characters. + - Backslashes not followed by double quotes are not special. + - But 2*n+1 backslashes followed by a double quote become + n backslashes followed by a double quote (n >= 0): + \" -> " + \\\" -> \" + \\\\\" -> \\" + */ +#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" +#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" +char ** +prepare_spawn (char **argv) +{ + size_t argc; + char **new_argv; + size_t i; + + /* Count number of arguments. */ + for (argc = 0; argv[argc] != NULL; argc++) + ; + + /* Allocate new argument vector. */ + new_argv = XMALLOC (char *, argc + 1); + + /* Put quoted arguments into the new argument vector. */ + for (i = 0; i < argc; i++) + { + const char *string = argv[i]; + + if (string[0] == '\0') + new_argv[i] = xstrdup ("\"\""); + else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL) + { + int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL); + size_t length; + unsigned int backslashes; + const char *s; + char *quoted_string; + char *p; + + length = 0; + backslashes = 0; + if (quote_around) + length++; + for (s = string; *s != '\0'; s++) + { + char c = *s; + if (c == '"') + length += backslashes + 1; + length++; + if (c == '\\') + backslashes++; + else + backslashes = 0; + } + if (quote_around) + length += backslashes + 1; + + quoted_string = XMALLOC (char, length + 1); + + p = quoted_string; + backslashes = 0; + if (quote_around) + *p++ = '"'; + for (s = string; *s != '\0'; s++) + { + char c = *s; + if (c == '"') + { + unsigned int j; + for (j = backslashes + 1; j > 0; j--) + *p++ = '\\'; + } + *p++ = c; + if (c == '\\') + backslashes++; + else + backslashes = 0; + } + if (quote_around) + { + unsigned int j; + for (j = backslashes; j > 0; j--) + *p++ = '\\'; + *p++ = '"'; + } + *p = '\0'; + + new_argv[i] = quoted_string; + } + else + new_argv[i] = (char *) string; + } + new_argv[argc] = NULL; + + return new_argv; +} +EOF + ;; + esac + + cat <<"EOF" +void lt_dump_script (FILE* f) +{ +EOF + func_emit_wrapper yes | + $SED -n -e ' +s/^\(.\{79\}\)\(..*\)/\1\ +\2/ +h +s/\([\\"]\)/\\\1/g +s/$/\\n/ +s/\([^\n]*\).*/ fputs ("\1", f);/p +g +D' + cat <<"EOF" +} +EOF +} +# end: func_emit_cwrapperexe_src + +# func_win32_import_lib_p ARG +# True if ARG is an import lib, as indicated by $file_magic_cmd +func_win32_import_lib_p () +{ + $debug_cmd + + case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in + *import*) : ;; + *) false ;; + esac +} + +# func_suncc_cstd_abi +# !!ONLY CALL THIS FOR SUN CC AFTER $compile_command IS FULLY EXPANDED!! +# Several compiler flags select an ABI that is incompatible with the +# Cstd library. Avoid specifying it if any are in CXXFLAGS. +func_suncc_cstd_abi () +{ + $debug_cmd + + case " $compile_command " in + *" -compat=g "*|*\ -std=c++[0-9][0-9]\ *|*" -library=stdcxx4 "*|*" -library=stlport4 "*) + suncc_use_cstd_abi=no + ;; + *) + suncc_use_cstd_abi=yes + ;; + esac +} + +# func_mode_link arg... +func_mode_link () +{ + $debug_cmd + + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + # It is impossible to link a dll without this setting, and + # we shouldn't force the makefile maintainer to figure out + # what system we are compiling for in order to pass an extra + # flag for every libtool invocation. + # allow_undefined=no + + # FIXME: Unfortunately, there are problems with the above when trying + # to make a dll that has undefined symbols, in which case not + # even a static library is built. For now, we need to specify + # -no-undefined on the libtool link line when we can be certain + # that all symbols are satisfied, otherwise we get a static library. + allow_undefined=yes + ;; + *) + allow_undefined=yes + ;; + esac + libtool_args=$nonopt + base_compile="$nonopt $@" + compile_command=$nonopt + finalize_command=$nonopt + + compile_rpath= + finalize_rpath= + compile_shlibpath= + finalize_shlibpath= + convenience= + old_convenience= + deplibs= + old_deplibs= + compiler_flags= + linker_flags= + dllsearchpath= + lib_search_path=`pwd` + inst_prefix_dir= + new_inherited_linker_flags= + + avoid_version=no + bindir= + dlfiles= + dlprefiles= + dlself=no + export_dynamic=no + export_symbols= + export_symbols_regex= + generated= + libobjs= + ltlibs= + module=no + no_install=no + objs= + os2dllname= + non_pic_objects= + precious_files_regex= + prefer_static_libs=no + preload=false + prev= + prevarg= + release= + rpath= + xrpath= + perm_rpath= + temp_rpath= + thread_safe=no + vinfo= + vinfo_number=no + weak_libs= + single_module=$wl-single_module + func_infer_tag $base_compile + + # We need to know -static, to get the right output filenames. + for arg + do + case $arg in + -shared) + test yes != "$build_libtool_libs" \ + && func_fatal_configuration "cannot build a shared library" + build_old_libs=no + break + ;; + -all-static | -static | -static-libtool-libs) + case $arg in + -all-static) + if test yes = "$build_libtool_libs" && test -z "$link_static_flag"; then + func_warning "complete static linking is impossible in this configuration" + fi + if test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + ;; + -static) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=built + ;; + -static-libtool-libs) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + ;; + esac + build_libtool_libs=no + build_old_libs=yes + break + ;; + esac + done + + # See if our shared archives depend on static archives. + test -n "$old_archive_from_new_cmds" && build_old_libs=yes + + # Go through the arguments, transforming them on the way. + while test "$#" -gt 0; do + arg=$1 + shift + func_quote_for_eval "$arg" + qarg=$func_quote_for_eval_unquoted_result + func_append libtool_args " $func_quote_for_eval_result" + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case $prev in + output) + func_append compile_command " @OUTPUT@" + func_append finalize_command " @OUTPUT@" + ;; + esac + + case $prev in + bindir) + bindir=$arg + prev= + continue + ;; + dlfiles|dlprefiles) + $preload || { + # Add the symbol object into the linking commands. + func_append compile_command " @SYMFILE@" + func_append finalize_command " @SYMFILE@" + preload=: + } + case $arg in + *.la | *.lo) ;; # We handle these cases below. + force) + if test no = "$dlself"; then + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + self) + if test dlprefiles = "$prev"; then + dlself=yes + elif test dlfiles = "$prev" && test yes != "$dlopen_self"; then + dlself=yes + else + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + *) + if test dlfiles = "$prev"; then + func_append dlfiles " $arg" + else + func_append dlprefiles " $arg" + fi + prev= + continue + ;; + esac + ;; + expsyms) + export_symbols=$arg + test -f "$arg" \ + || func_fatal_error "symbol file '$arg' does not exist" + prev= + continue + ;; + expsyms_regex) + export_symbols_regex=$arg + prev= + continue + ;; + framework) + case $host in + *-*-darwin*) + case "$deplibs " in + *" $qarg.ltframework "*) ;; + *) func_append deplibs " $qarg.ltframework" # this is fixed later + ;; + esac + ;; + esac + prev= + continue + ;; + inst_prefix) + inst_prefix_dir=$arg + prev= + continue + ;; + mllvm) + # Clang does not use LLVM to link, so we can simply discard any + # '-mllvm $arg' options when doing the link step. + prev= + continue + ;; + objectlist) + if test -f "$arg"; then + save_arg=$arg + moreargs= + for fil in `cat "$save_arg"` + do +# func_append moreargs " $fil" + arg=$fil + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if func_lalib_unsafe_p "$arg"; then + pic_object= + non_pic_object= + + # Read the .lo file + func_source "$arg" + + if test -z "$pic_object" || + test -z "$non_pic_object" || + test none = "$pic_object" && + test none = "$non_pic_object"; then + func_fatal_error "cannot find name of object for '$arg'" + fi + + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir=$func_dirname_result + + if test none != "$pic_object"; then + # Prepend the subdirectory the object is found in. + pic_object=$xdir$pic_object + + if test dlfiles = "$prev"; then + if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then + func_append dlfiles " $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test dlprefiles = "$prev"; then + # Preload the old-style object. + func_append dlprefiles " $pic_object" + prev= + fi + + # A PIC object. + func_append libobjs " $pic_object" + arg=$pic_object + fi + + # Non-PIC object. + if test none != "$non_pic_object"; then + # Prepend the subdirectory the object is found in. + non_pic_object=$xdir$non_pic_object + + # A standard non-PIC object + func_append non_pic_objects " $non_pic_object" + if test -z "$pic_object" || test none = "$pic_object"; then + arg=$non_pic_object + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object=$pic_object + func_append non_pic_objects " $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if $opt_dry_run; then + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir=$func_dirname_result + + func_lo2o "$arg" + pic_object=$xdir$objdir/$func_lo2o_result + non_pic_object=$xdir$func_lo2o_result + func_append libobjs " $pic_object" + func_append non_pic_objects " $non_pic_object" + else + func_fatal_error "'$arg' is not a valid libtool object" + fi + fi + done + else + func_fatal_error "link input file '$arg' does not exist" + fi + arg=$save_arg + prev= + continue + ;; + os2dllname) + os2dllname=$arg + prev= + continue + ;; + precious_regex) + precious_files_regex=$arg + prev= + continue + ;; + release) + release=-$arg + prev= + continue + ;; + rpath | xrpath) + # We need an absolute path. + case $arg in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + func_fatal_error "only absolute run-paths are allowed" + ;; + esac + if test rpath = "$prev"; then + case "$rpath " in + *" $arg "*) ;; + *) func_append rpath " $arg" ;; + esac + else + case "$xrpath " in + *" $arg "*) ;; + *) func_append xrpath " $arg" ;; + esac + fi + prev= + continue + ;; + shrext) + shrext_cmds=$arg + prev= + continue + ;; + weak) + func_append weak_libs " $arg" + prev= + continue + ;; + xcclinker) + func_append linker_flags " $qarg" + func_append compiler_flags " $qarg" + prev= + func_append compile_command " $qarg" + func_append finalize_command " $qarg" + continue + ;; + xcompiler) + func_append compiler_flags " $qarg" + prev= + func_append compile_command " $qarg" + func_append finalize_command " $qarg" + continue + ;; + xlinker) + func_append linker_flags " $qarg" + func_append compiler_flags " $wl$qarg" + prev= + func_append compile_command " $wl$qarg" + func_append finalize_command " $wl$qarg" + continue + ;; + *) + eval "$prev=\"\$arg\"" + prev= + continue + ;; + esac + fi # test -n "$prev" + + prevarg=$arg + + case $arg in + -all-static) + if test -n "$link_static_flag"; then + # See comment for -static flag below, for more details. + func_append compile_command " $link_static_flag" + func_append finalize_command " $link_static_flag" + fi + continue + ;; + + -allow-undefined) + # FIXME: remove this flag sometime in the future. + func_fatal_error "'-allow-undefined' must not be used because it is the default" + ;; + + -avoid-version) + avoid_version=yes + continue + ;; + + -bindir) + prev=bindir + continue + ;; + + -dlopen) + prev=dlfiles + continue + ;; + + -dlpreopen) + prev=dlprefiles + continue + ;; + + -export-dynamic) + export_dynamic=yes + continue + ;; + + -export-symbols | -export-symbols-regex) + if test -n "$export_symbols" || test -n "$export_symbols_regex"; then + func_fatal_error "more than one -exported-symbols argument is not allowed" + fi + if test X-export-symbols = "X$arg"; then + prev=expsyms + else + prev=expsyms_regex + fi + continue + ;; + + -framework) + prev=framework + continue + ;; + + -inst-prefix-dir) + prev=inst_prefix + continue + ;; + + # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* + # so, if we see these flags be careful not to treat them like -L + -L[A-Z][A-Z]*:*) + case $with_gcc/$host in + no/*-*-irix* | /*-*-irix*) + func_append compile_command " $arg" + func_append finalize_command " $arg" + ;; + esac + continue + ;; + + -L*) + func_stripname "-L" '' "$arg" + if test -z "$func_stripname_result"; then + if test "$#" -gt 0; then + func_fatal_error "require no space between '-L' and '$1'" + else + func_fatal_error "need path for '-L' option" + fi + fi + func_resolve_sysroot "$func_stripname_result" + dir=$func_resolve_sysroot_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + absdir=`cd "$dir" && pwd` + test -z "$absdir" && \ + func_fatal_error "cannot determine absolute directory name of '$dir'" + dir=$absdir + ;; + esac + case "$deplibs " in + *" -L$dir "* | *" $arg "*) + # Will only happen for absolute or sysroot arguments + ;; + *) + # Preserve sysroot, but never include relative directories + case $dir in + [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;; + *) func_append deplibs " -L$dir" ;; + esac + func_append lib_search_path " $dir" + ;; + esac + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$dir:"*) ;; + ::) dllsearchpath=$dir;; + *) func_append dllsearchpath ":$dir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + ::) dllsearchpath=$testbindir;; + *) func_append dllsearchpath ":$testbindir";; + esac + ;; + esac + continue + ;; + + -l*) + if test X-lc = "X$arg" || test X-lm = "X$arg"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) + # These systems don't actually have a C or math library (as such) + continue + ;; + *-*-os2*) + # These systems don't actually have a C library (as such) + test X-lc = "X$arg" && continue + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*) + # Do not include libc due to us having libc/libc_r. + test X-lc = "X$arg" && continue + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C and math libraries are in the System framework + func_append deplibs " System.ltframework" + continue + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + test X-lc = "X$arg" && continue + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + test X-lc = "X$arg" && continue + ;; + esac + elif test X-lc_r = "X$arg"; then + case $host in + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*) + # Do not include libc_r directly, use -pthread flag. + continue + ;; + esac + fi + func_append deplibs " $arg" + continue + ;; + + -mllvm) + prev=mllvm + continue + ;; + + -module) + module=yes + continue + ;; + + # Tru64 UNIX uses -model [arg] to determine the layout of C++ + # classes, name mangling, and exception handling. + # Darwin uses the -arch flag to determine output architecture. + -model|-arch|-isysroot|--sysroot) + func_append compiler_flags " $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + prev=xcompiler + continue + ;; + + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ + |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) + func_append compiler_flags " $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + case "$new_inherited_linker_flags " in + *" $arg "*) ;; + * ) func_append new_inherited_linker_flags " $arg" ;; + esac + continue + ;; + + -multi_module) + single_module=$wl-multi_module + continue + ;; + + -no-fast-install) + fast_install=no + continue + ;; + + -no-install) + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) + # The PATH hackery in wrapper scripts is required on Windows + # and Darwin in order for the loader to find any dlls it needs. + func_warning "'-no-install' is ignored for $host" + func_warning "assuming '-no-fast-install' instead" + fast_install=no + ;; + *) no_install=yes ;; + esac + continue + ;; + + -no-undefined) + allow_undefined=no + continue + ;; + + -objectlist) + prev=objectlist + continue + ;; + + -os2dllname) + prev=os2dllname + continue + ;; + + -o) prev=output ;; + + -precious-files-regex) + prev=precious_regex + continue + ;; + + -release) + prev=release + continue + ;; + + -rpath) + prev=rpath + continue + ;; + + -R) + prev=xrpath + continue + ;; + + -R*) + func_stripname '-R' '' "$arg" + dir=$func_stripname_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + =*) + func_stripname '=' '' "$dir" + dir=$lt_sysroot$func_stripname_result + ;; + *) + func_fatal_error "only absolute run-paths are allowed" + ;; + esac + case "$xrpath " in + *" $dir "*) ;; + *) func_append xrpath " $dir" ;; + esac + continue + ;; + + -shared) + # The effects of -shared are defined in a previous loop. + continue + ;; + + -shrext) + prev=shrext + continue + ;; + + -static | -static-libtool-libs) + # The effects of -static are defined in a previous loop. + # We used to do the same as -all-static on platforms that + # didn't have a PIC flag, but the assumption that the effects + # would be equivalent was wrong. It would break on at least + # Digital Unix and AIX. + continue + ;; + + -thread-safe) + thread_safe=yes + continue + ;; + + -version-info) + prev=vinfo + continue + ;; + + -version-number) + prev=vinfo + vinfo_number=yes + continue + ;; + + -weak) + prev=weak + continue + ;; + + -Wc,*) + func_stripname '-Wc,' '' "$arg" + args=$func_stripname_result + arg= + save_ifs=$IFS; IFS=, + for flag in $args; do + IFS=$save_ifs + func_quote_for_eval "$flag" + func_append arg " $func_quote_for_eval_result" + func_append compiler_flags " $func_quote_for_eval_result" + done + IFS=$save_ifs + func_stripname ' ' '' "$arg" + arg=$func_stripname_result + ;; + + -Wl,*) + func_stripname '-Wl,' '' "$arg" + args=$func_stripname_result + arg= + save_ifs=$IFS; IFS=, + for flag in $args; do + IFS=$save_ifs + func_quote_for_eval "$flag" + func_append arg " $wl$func_quote_for_eval_result" + func_append compiler_flags " $wl$func_quote_for_eval_result" + func_append linker_flags " $func_quote_for_eval_result" + done + IFS=$save_ifs + func_stripname ' ' '' "$arg" + arg=$func_stripname_result + ;; + + -Xcompiler) + prev=xcompiler + continue + ;; + + -Xlinker) + prev=xlinker + continue + ;; + + -XCClinker) + prev=xcclinker + continue + ;; + + # -msg_* for osf cc + -msg_*) + func_quote_for_eval "$arg" + arg=$func_quote_for_eval_result + ;; + + # Flags to be passed through unchanged, with rationale: + # -64, -mips[0-9] enable 64-bit mode for the SGI compiler + # -r[0-9][0-9]* specify processor for the SGI compiler + # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler + # +DA*, +DD* enable 64-bit mode for the HP compiler + # -q* compiler args for the IBM compiler + # -m*, -t[45]*, -txscale* architecture-specific flags for GCC + # -F/path path to uninstalled frameworks, gcc on darwin + # -p, -pg, --coverage, -fprofile-* profiling flags for GCC + # -fstack-protector* stack protector flags for GCC + # @file GCC response files + # -tp=* Portland pgcc target processor selection + # --sysroot=* for sysroot support + # -O*, -g*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization + # -stdlib=* select c++ std lib with clang + -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ + -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ + -O*|-g*|-flto*|-fwhopr*|-fuse-linker-plugin|-fstack-protector*|-stdlib=*) + func_quote_for_eval "$arg" + arg=$func_quote_for_eval_result + func_append compile_command " $arg" + func_append finalize_command " $arg" + func_append compiler_flags " $arg" + continue + ;; + + -Z*) + if test os2 = "`expr $host : '.*\(os2\)'`"; then + # OS/2 uses -Zxxx to specify OS/2-specific options + compiler_flags="$compiler_flags $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + case $arg in + -Zlinker | -Zstack) + prev=xcompiler + ;; + esac + continue + else + # Otherwise treat like 'Some other compiler flag' below + func_quote_for_eval "$arg" + arg=$func_quote_for_eval_result + fi + ;; + + # Some other compiler flag. + -* | +*) + func_quote_for_eval "$arg" + arg=$func_quote_for_eval_result + ;; + + *.$objext) + # A standard object. + func_append objs " $arg" + ;; + + *.lo) + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if func_lalib_unsafe_p "$arg"; then + pic_object= + non_pic_object= + + # Read the .lo file + func_source "$arg" + + if test -z "$pic_object" || + test -z "$non_pic_object" || + test none = "$pic_object" && + test none = "$non_pic_object"; then + func_fatal_error "cannot find name of object for '$arg'" + fi + + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir=$func_dirname_result + + test none = "$pic_object" || { + # Prepend the subdirectory the object is found in. + pic_object=$xdir$pic_object + + if test dlfiles = "$prev"; then + if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then + func_append dlfiles " $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test dlprefiles = "$prev"; then + # Preload the old-style object. + func_append dlprefiles " $pic_object" + prev= + fi + + # A PIC object. + func_append libobjs " $pic_object" + arg=$pic_object + } + + # Non-PIC object. + if test none != "$non_pic_object"; then + # Prepend the subdirectory the object is found in. + non_pic_object=$xdir$non_pic_object + + # A standard non-PIC object + func_append non_pic_objects " $non_pic_object" + if test -z "$pic_object" || test none = "$pic_object"; then + arg=$non_pic_object + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object=$pic_object + func_append non_pic_objects " $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if $opt_dry_run; then + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir=$func_dirname_result + + func_lo2o "$arg" + pic_object=$xdir$objdir/$func_lo2o_result + non_pic_object=$xdir$func_lo2o_result + func_append libobjs " $pic_object" + func_append non_pic_objects " $non_pic_object" + else + func_fatal_error "'$arg' is not a valid libtool object" + fi + fi + ;; + + *.$libext) + # An archive. + func_append deplibs " $arg" + func_append old_deplibs " $arg" + continue + ;; + + *.la) + # A libtool-controlled library. + + func_resolve_sysroot "$arg" + if test dlfiles = "$prev"; then + # This library was specified with -dlopen. + func_append dlfiles " $func_resolve_sysroot_result" + prev= + elif test dlprefiles = "$prev"; then + # The library was specified with -dlpreopen. + func_append dlprefiles " $func_resolve_sysroot_result" + prev= + else + func_append deplibs " $func_resolve_sysroot_result" + fi + continue + ;; + + # Some other compiler argument. + *) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + func_quote_for_eval "$arg" + arg=$func_quote_for_eval_result + ;; + esac # arg + + # Now actually substitute the argument into the commands. + if test -n "$arg"; then + func_append compile_command " $arg" + func_append finalize_command " $arg" + fi + done # argument parsing loop + + test -n "$prev" && \ + func_fatal_help "the '$prevarg' option requires an argument" + + if test yes = "$export_dynamic" && test -n "$export_dynamic_flag_spec"; then + eval arg=\"$export_dynamic_flag_spec\" + func_append compile_command " $arg" + func_append finalize_command " $arg" + fi + + oldlibs= + # calculate the name of the file, without its directory + func_basename "$output" + outputname=$func_basename_result + libobjs_save=$libobjs + + if test -n "$shlibpath_var"; then + # get the directories listed in $shlibpath_var + eval shlib_search_path=\`\$ECHO \"\$$shlibpath_var\" \| \$SED \'s/:/ /g\'\` + else + shlib_search_path= + fi + eval sys_lib_search_path=\"$sys_lib_search_path_spec\" + eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" + + # Definition is injected by LT_CONFIG during libtool generation. + func_munge_path_list sys_lib_dlsearch_path "$LT_SYS_LIBRARY_PATH" + + func_dirname "$output" "/" "" + output_objdir=$func_dirname_result$objdir + func_to_tool_file "$output_objdir/" + tool_output_objdir=$func_to_tool_file_result + # Create the object directory. + func_mkdir_p "$output_objdir" + + # Determine the type of output + case $output in + "") + func_fatal_help "you must specify an output file" + ;; + *.$libext) linkmode=oldlib ;; + *.lo | *.$objext) linkmode=obj ;; + *.la) linkmode=lib ;; + *) linkmode=prog ;; # Anything else should be a program. + esac + + specialdeplibs= + + libs= + # Find all interdependent deplibs by searching for libraries + # that are linked more than once (e.g. -la -lb -la) + for deplib in $deplibs; do + if $opt_preserve_dup_deps; then + case "$libs " in + *" $deplib "*) func_append specialdeplibs " $deplib" ;; + esac + fi + func_append libs " $deplib" + done + + if test lib = "$linkmode"; then + libs="$predeps $libs $compiler_lib_search_path $postdeps" + + # Compute libraries that are listed more than once in $predeps + # $postdeps and mark them as special (i.e., whose duplicates are + # not to be eliminated). + pre_post_deps= + if $opt_duplicate_compiler_generated_deps; then + for pre_post_dep in $predeps $postdeps; do + case "$pre_post_deps " in + *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;; + esac + func_append pre_post_deps " $pre_post_dep" + done + fi + pre_post_deps= + fi + + deplibs= + newdependency_libs= + newlib_search_path= + need_relink=no # whether we're linking any uninstalled libtool libraries + notinst_deplibs= # not-installed libtool libraries + notinst_path= # paths that contain not-installed libtool libraries + + case $linkmode in + lib) + passes="conv dlpreopen link" + for file in $dlfiles $dlprefiles; do + case $file in + *.la) ;; + *) + func_fatal_help "libraries can '-dlopen' only libtool libraries: $file" + ;; + esac + done + ;; + prog) + compile_deplibs= + finalize_deplibs= + alldeplibs=false + newdlfiles= + newdlprefiles= + passes="conv scan dlopen dlpreopen link" + ;; + *) passes="conv" + ;; + esac + + for pass in $passes; do + # The preopen pass in lib mode reverses $deplibs; put it back here + # so that -L comes before libs that need it for instance... + if test lib,link = "$linkmode,$pass"; then + ## FIXME: Find the place where the list is rebuilt in the wrong + ## order, and fix it there properly + tmp_deplibs= + for deplib in $deplibs; do + tmp_deplibs="$deplib $tmp_deplibs" + done + deplibs=$tmp_deplibs + fi + + if test lib,link = "$linkmode,$pass" || + test prog,scan = "$linkmode,$pass"; then + libs=$deplibs + deplibs= + fi + if test prog = "$linkmode"; then + case $pass in + dlopen) libs=$dlfiles ;; + dlpreopen) libs=$dlprefiles ;; + link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; + esac + fi + if test lib,dlpreopen = "$linkmode,$pass"; then + # Collect and forward deplibs of preopened libtool libs + for lib in $dlprefiles; do + # Ignore non-libtool-libs + dependency_libs= + func_resolve_sysroot "$lib" + case $lib in + *.la) func_source "$func_resolve_sysroot_result" ;; + esac + + # Collect preopened libtool deplibs, except any this library + # has declared as weak libs + for deplib in $dependency_libs; do + func_basename "$deplib" + deplib_base=$func_basename_result + case " $weak_libs " in + *" $deplib_base "*) ;; + *) func_append deplibs " $deplib" ;; + esac + done + done + libs=$dlprefiles + fi + if test dlopen = "$pass"; then + # Collect dlpreopened libraries + save_deplibs=$deplibs + deplibs= + fi + + for deplib in $libs; do + lib= + found=false + case $deplib in + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ + |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) + if test prog,link = "$linkmode,$pass"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + func_append compiler_flags " $deplib" + if test lib = "$linkmode"; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; + * ) func_append new_inherited_linker_flags " $deplib" ;; + esac + fi + fi + continue + ;; + -l*) + if test lib != "$linkmode" && test prog != "$linkmode"; then + func_warning "'-l' is ignored for archives/objects" + continue + fi + func_stripname '-l' '' "$deplib" + name=$func_stripname_result + if test lib = "$linkmode"; then + searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" + else + searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" + fi + for searchdir in $searchdirs; do + for search_ext in .la $std_shrext .so .a; do + # Search the libtool library + lib=$searchdir/lib$name$search_ext + if test -f "$lib"; then + if test .la = "$search_ext"; then + found=: + else + found=false + fi + break 2 + fi + done + done + if $found; then + # deplib is a libtool library + # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, + # We need to do some special things here, and not later. + if test yes = "$allow_libtool_libs_with_static_runtimes"; then + case " $predeps $postdeps " in + *" $deplib "*) + if func_lalib_p "$lib"; then + library_names= + old_library= + func_source "$lib" + for l in $old_library $library_names; do + ll=$l + done + if test "X$ll" = "X$old_library"; then # only static version available + found=false + func_dirname "$lib" "" "." + ladir=$func_dirname_result + lib=$ladir/$old_library + if test prog,link = "$linkmode,$pass"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs" + fi + continue + fi + fi + ;; + *) ;; + esac + fi + else + # deplib doesn't seem to be a libtool library + if test prog,link = "$linkmode,$pass"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs" + fi + continue + fi + ;; # -l + *.ltframework) + if test prog,link = "$linkmode,$pass"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + if test lib = "$linkmode"; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; + * ) func_append new_inherited_linker_flags " $deplib" ;; + esac + fi + fi + continue + ;; + -L*) + case $linkmode in + lib) + deplibs="$deplib $deplibs" + test conv = "$pass" && continue + newdependency_libs="$deplib $newdependency_libs" + func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + func_append newlib_search_path " $func_resolve_sysroot_result" + ;; + prog) + if test conv = "$pass"; then + deplibs="$deplib $deplibs" + continue + fi + if test scan = "$pass"; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + func_append newlib_search_path " $func_resolve_sysroot_result" + ;; + *) + func_warning "'-L' is ignored for archives/objects" + ;; + esac # linkmode + continue + ;; # -L + -R*) + if test link = "$pass"; then + func_stripname '-R' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + dir=$func_resolve_sysroot_result + # Make sure the xrpath contains only unique directories. + case "$xrpath " in + *" $dir "*) ;; + *) func_append xrpath " $dir" ;; + esac + fi + deplibs="$deplib $deplibs" + continue + ;; + *.la) + func_resolve_sysroot "$deplib" + lib=$func_resolve_sysroot_result + ;; + *.$libext) + if test conv = "$pass"; then + deplibs="$deplib $deplibs" + continue + fi + case $linkmode in + lib) + # Linking convenience modules into shared libraries is allowed, + # but linking other static libraries is non-portable. + case " $dlpreconveniencelibs " in + *" $deplib "*) ;; + *) + valid_a_lib=false + case $deplibs_check_method in + match_pattern*) + set dummy $deplibs_check_method; shift + match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \ + | $EGREP "$match_pattern_regex" > /dev/null; then + valid_a_lib=: + fi + ;; + pass_all) + valid_a_lib=: + ;; + esac + if $valid_a_lib; then + echo + $ECHO "*** Warning: Linking the shared library $output against the" + $ECHO "*** static library $deplib is not portable!" + deplibs="$deplib $deplibs" + else + echo + $ECHO "*** Warning: Trying to link with static lib archive $deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because the file extensions .$libext of this argument makes me believe" + echo "*** that it is just a static archive that I should not use here." + fi + ;; + esac + continue + ;; + prog) + if test link != "$pass"; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + continue + ;; + esac # linkmode + ;; # *.$libext + *.lo | *.$objext) + if test conv = "$pass"; then + deplibs="$deplib $deplibs" + elif test prog = "$linkmode"; then + if test dlpreopen = "$pass" || test yes != "$dlopen_support" || test no = "$build_libtool_libs"; then + # If there is no dlopen support or we're linking statically, + # we need to preload. + func_append newdlprefiles " $deplib" + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + func_append newdlfiles " $deplib" + fi + fi + continue + ;; + %DEPLIBS%) + alldeplibs=: + continue + ;; + esac # case $deplib + + $found || test -f "$lib" \ + || func_fatal_error "cannot find the library '$lib' or unhandled argument '$deplib'" + + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$lib" \ + || func_fatal_error "'$lib' is not a valid libtool archive" + + func_dirname "$lib" "" "." + ladir=$func_dirname_result + + dlname= + dlopen= + dlpreopen= + libdir= + library_names= + old_library= + inherited_linker_flags= + # If the library was installed with an old release of libtool, + # it will not redefine variables installed, or shouldnotlink + installed=yes + shouldnotlink=no + avoidtemprpath= + + + # Read the .la file + func_source "$lib" + + # Convert "-framework foo" to "foo.ltframework" + if test -n "$inherited_linker_flags"; then + tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'` + for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do + case " $new_inherited_linker_flags " in + *" $tmp_inherited_linker_flag "*) ;; + *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";; + esac + done + fi + dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + if test lib,link = "$linkmode,$pass" || + test prog,scan = "$linkmode,$pass" || + { test prog != "$linkmode" && test lib != "$linkmode"; }; then + test -n "$dlopen" && func_append dlfiles " $dlopen" + test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen" + fi + + if test conv = "$pass"; then + # Only check for convenience libraries + deplibs="$lib $deplibs" + if test -z "$libdir"; then + if test -z "$old_library"; then + func_fatal_error "cannot find name of link library for '$lib'" + fi + # It is a libtool convenience library, so add in its objects. + func_append convenience " $ladir/$objdir/$old_library" + func_append old_convenience " $ladir/$objdir/$old_library" + elif test prog != "$linkmode" && test lib != "$linkmode"; then + func_fatal_error "'$lib' is not a convenience library" + fi + tmp_libs= + for deplib in $dependency_libs; do + deplibs="$deplib $deplibs" + if $opt_preserve_dup_deps; then + case "$tmp_libs " in + *" $deplib "*) func_append specialdeplibs " $deplib" ;; + esac + fi + func_append tmp_libs " $deplib" + done + continue + fi # $pass = conv + + + # Get the name of the library we link against. + linklib= + if test -n "$old_library" && + { test yes = "$prefer_static_libs" || + test built,no = "$prefer_static_libs,$installed"; }; then + linklib=$old_library + else + for l in $old_library $library_names; do + linklib=$l + done + fi + if test -z "$linklib"; then + func_fatal_error "cannot find name of link library for '$lib'" + fi + + # This library was specified with -dlopen. + if test dlopen = "$pass"; then + test -z "$libdir" \ + && func_fatal_error "cannot -dlopen a convenience library: '$lib'" + if test -z "$dlname" || + test yes != "$dlopen_support" || + test no = "$build_libtool_libs" + then + # If there is no dlname, no dlopen support or we're linking + # statically, we need to preload. We also need to preload any + # dependent libraries so libltdl's deplib preloader doesn't + # bomb out in the load deplibs phase. + func_append dlprefiles " $lib $dependency_libs" + else + func_append newdlfiles " $lib" + fi + continue + fi # $pass = dlopen + + # We need an absolute path. + case $ladir in + [\\/]* | [A-Za-z]:[\\/]*) abs_ladir=$ladir ;; + *) + abs_ladir=`cd "$ladir" && pwd` + if test -z "$abs_ladir"; then + func_warning "cannot determine absolute directory name of '$ladir'" + func_warning "passing it literally to the linker, although it might fail" + abs_ladir=$ladir + fi + ;; + esac + func_basename "$lib" + laname=$func_basename_result + + # Find the relevant object directory and library name. + if test yes = "$installed"; then + if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then + func_warning "library '$lib' was moved." + dir=$ladir + absdir=$abs_ladir + libdir=$abs_ladir + else + dir=$lt_sysroot$libdir + absdir=$lt_sysroot$libdir + fi + test yes = "$hardcode_automatic" && avoidtemprpath=yes + else + if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then + dir=$ladir + absdir=$abs_ladir + # Remove this search path later + func_append notinst_path " $abs_ladir" + else + dir=$ladir/$objdir + absdir=$abs_ladir/$objdir + # Remove this search path later + func_append notinst_path " $abs_ladir" + fi + fi # $installed = yes + func_stripname 'lib' '.la' "$laname" + name=$func_stripname_result + + # This library was specified with -dlpreopen. + if test dlpreopen = "$pass"; then + if test -z "$libdir" && test prog = "$linkmode"; then + func_fatal_error "only libraries may -dlpreopen a convenience library: '$lib'" + fi + case $host in + # special handling for platforms with PE-DLLs. + *cygwin* | *mingw* | *cegcc* ) + # Linker will automatically link against shared library if both + # static and shared are present. Therefore, ensure we extract + # symbols from the import library if a shared library is present + # (otherwise, the dlopen module name will be incorrect). We do + # this by putting the import library name into $newdlprefiles. + # We recover the dlopen module name by 'saving' the la file + # name in a special purpose variable, and (later) extracting the + # dlname from the la file. + if test -n "$dlname"; then + func_tr_sh "$dir/$linklib" + eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname" + func_append newdlprefiles " $dir/$linklib" + else + func_append newdlprefiles " $dir/$old_library" + # Keep a list of preopened convenience libraries to check + # that they are being used correctly in the link pass. + test -z "$libdir" && \ + func_append dlpreconveniencelibs " $dir/$old_library" + fi + ;; + * ) + # Prefer using a static library (so that no silly _DYNAMIC symbols + # are required to link). + if test -n "$old_library"; then + func_append newdlprefiles " $dir/$old_library" + # Keep a list of preopened convenience libraries to check + # that they are being used correctly in the link pass. + test -z "$libdir" && \ + func_append dlpreconveniencelibs " $dir/$old_library" + # Otherwise, use the dlname, so that lt_dlopen finds it. + elif test -n "$dlname"; then + func_append newdlprefiles " $dir/$dlname" + else + func_append newdlprefiles " $dir/$linklib" + fi + ;; + esac + fi # $pass = dlpreopen + + if test -z "$libdir"; then + # Link the convenience library + if test lib = "$linkmode"; then + deplibs="$dir/$old_library $deplibs" + elif test prog,link = "$linkmode,$pass"; then + compile_deplibs="$dir/$old_library $compile_deplibs" + finalize_deplibs="$dir/$old_library $finalize_deplibs" + else + deplibs="$lib $deplibs" # used for prog,scan pass + fi + continue + fi + + + if test prog = "$linkmode" && test link != "$pass"; then + func_append newlib_search_path " $ladir" + deplibs="$lib $deplibs" + + linkalldeplibs=false + if test no != "$link_all_deplibs" || test -z "$library_names" || + test no = "$build_libtool_libs"; then + linkalldeplibs=: + fi + + tmp_libs= + for deplib in $dependency_libs; do + case $deplib in + -L*) func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + func_append newlib_search_path " $func_resolve_sysroot_result" + ;; + esac + # Need to link against all dependency_libs? + if $linkalldeplibs; then + deplibs="$deplib $deplibs" + else + # Need to hardcode shared library paths + # or/and link against static libraries + newdependency_libs="$deplib $newdependency_libs" + fi + if $opt_preserve_dup_deps; then + case "$tmp_libs " in + *" $deplib "*) func_append specialdeplibs " $deplib" ;; + esac + fi + func_append tmp_libs " $deplib" + done # for deplib + continue + fi # $linkmode = prog... + + if test prog,link = "$linkmode,$pass"; then + if test -n "$library_names" && + { { test no = "$prefer_static_libs" || + test built,yes = "$prefer_static_libs,$installed"; } || + test -z "$old_library"; }; then + # We need to hardcode the library path + if test -n "$shlibpath_var" && test -z "$avoidtemprpath"; then + # Make sure the rpath contains only unique directories. + case $temp_rpath: in + *"$absdir:"*) ;; + *) func_append temp_rpath "$absdir:" ;; + esac + fi + + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) func_append compile_rpath " $absdir" ;; + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + ;; + esac + fi # $linkmode,$pass = prog,link... + + if $alldeplibs && + { test pass_all = "$deplibs_check_method" || + { test yes = "$build_libtool_libs" && + test -n "$library_names"; }; }; then + # We only need to search for static libraries + continue + fi + fi + + link_static=no # Whether the deplib will be linked statically + use_static_libs=$prefer_static_libs + if test built = "$use_static_libs" && test yes = "$installed"; then + use_static_libs=no + fi + if test -n "$library_names" && + { test no = "$use_static_libs" || test -z "$old_library"; }; then + case $host in + *cygwin* | *mingw* | *cegcc* | *os2*) + # No point in relinking DLLs because paths are not encoded + func_append notinst_deplibs " $lib" + need_relink=no + ;; + *) + if test no = "$installed"; then + func_append notinst_deplibs " $lib" + need_relink=yes + fi + ;; + esac + # This is a shared library + + # Warn about portability, can't link against -module's on some + # systems (darwin). Don't bleat about dlopened modules though! + dlopenmodule= + for dlpremoduletest in $dlprefiles; do + if test "X$dlpremoduletest" = "X$lib"; then + dlopenmodule=$dlpremoduletest + break + fi + done + if test -z "$dlopenmodule" && test yes = "$shouldnotlink" && test link = "$pass"; then + echo + if test prog = "$linkmode"; then + $ECHO "*** Warning: Linking the executable $output against the loadable module" + else + $ECHO "*** Warning: Linking the shared library $output against the loadable module" + fi + $ECHO "*** $linklib is not portable!" + fi + if test lib = "$linkmode" && + test yes = "$hardcode_into_libs"; then + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) func_append compile_rpath " $absdir" ;; + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + ;; + esac + fi + + if test -n "$old_archive_from_expsyms_cmds"; then + # figure out the soname + set dummy $library_names + shift + realname=$1 + shift + libname=`eval "\\$ECHO \"$libname_spec\""` + # use dlname if we got it. it's perfectly good, no? + if test -n "$dlname"; then + soname=$dlname + elif test -n "$soname_spec"; then + # bleh windows + case $host in + *cygwin* | mingw* | *cegcc* | *os2*) + func_arith $current - $age + major=$func_arith_result + versuffix=-$major + ;; + esac + eval soname=\"$soname_spec\" + else + soname=$realname + fi + + # Make a new name for the extract_expsyms_cmds to use + soroot=$soname + func_basename "$soroot" + soname=$func_basename_result + func_stripname 'lib' '.dll' "$soname" + newlib=libimp-$func_stripname_result.a + + # If the library has no export list, then create one now + if test -f "$output_objdir/$soname-def"; then : + else + func_verbose "extracting exported symbol list from '$soname'" + func_execute_cmds "$extract_expsyms_cmds" 'exit $?' + fi + + # Create $newlib + if test -f "$output_objdir/$newlib"; then :; else + func_verbose "generating import library for '$soname'" + func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' + fi + # make sure the library variables are pointing to the new library + dir=$output_objdir + linklib=$newlib + fi # test -n "$old_archive_from_expsyms_cmds" + + if test prog = "$linkmode" || test relink != "$opt_mode"; then + add_shlibpath= + add_dir= + add= + lib_linked=yes + case $hardcode_action in + immediate | unsupported) + if test no = "$hardcode_direct"; then + add=$dir/$linklib + case $host in + *-*-sco3.2v5.0.[024]*) add_dir=-L$dir ;; + *-*-sysv4*uw2*) add_dir=-L$dir ;; + *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ + *-*-unixware7*) add_dir=-L$dir ;; + *-*-darwin* ) + # if the lib is a (non-dlopened) module then we cannot + # link against it, someone is ignoring the earlier warnings + if /usr/bin/file -L $add 2> /dev/null | + $GREP ": [^:]* bundle" >/dev/null; then + if test "X$dlopenmodule" != "X$lib"; then + $ECHO "*** Warning: lib $linklib is a module, not a shared library" + if test -z "$old_library"; then + echo + echo "*** And there doesn't seem to be a static archive available" + echo "*** The link will probably fail, sorry" + else + add=$dir/$old_library + fi + elif test -n "$old_library"; then + add=$dir/$old_library + fi + fi + esac + elif test no = "$hardcode_minus_L"; then + case $host in + *-*-sunos*) add_shlibpath=$dir ;; + esac + add_dir=-L$dir + add=-l$name + elif test no = "$hardcode_shlibpath_var"; then + add_shlibpath=$dir + add=-l$name + else + lib_linked=no + fi + ;; + relink) + if test yes = "$hardcode_direct" && + test no = "$hardcode_direct_absolute"; then + add=$dir/$linklib + elif test yes = "$hardcode_minus_L"; then + add_dir=-L$absdir + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + func_append add_dir " -L$inst_prefix_dir$libdir" + ;; + esac + fi + add=-l$name + elif test yes = "$hardcode_shlibpath_var"; then + add_shlibpath=$dir + add=-l$name + else + lib_linked=no + fi + ;; + *) lib_linked=no ;; + esac + + if test yes != "$lib_linked"; then + func_fatal_configuration "unsupported hardcode properties" + fi + + if test -n "$add_shlibpath"; then + case :$compile_shlibpath: in + *":$add_shlibpath:"*) ;; + *) func_append compile_shlibpath "$add_shlibpath:" ;; + esac + fi + if test prog = "$linkmode"; then + test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" + test -n "$add" && compile_deplibs="$add $compile_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + if test yes != "$hardcode_direct" && + test yes != "$hardcode_minus_L" && + test yes = "$hardcode_shlibpath_var"; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) func_append finalize_shlibpath "$libdir:" ;; + esac + fi + fi + fi + + if test prog = "$linkmode" || test relink = "$opt_mode"; then + add_shlibpath= + add_dir= + add= + # Finalize command for both is simple: just hardcode it. + if test yes = "$hardcode_direct" && + test no = "$hardcode_direct_absolute"; then + add=$libdir/$linklib + elif test yes = "$hardcode_minus_L"; then + add_dir=-L$libdir + add=-l$name + elif test yes = "$hardcode_shlibpath_var"; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) func_append finalize_shlibpath "$libdir:" ;; + esac + add=-l$name + elif test yes = "$hardcode_automatic"; then + if test -n "$inst_prefix_dir" && + test -f "$inst_prefix_dir$libdir/$linklib"; then + add=$inst_prefix_dir$libdir/$linklib + else + add=$libdir/$linklib + fi + else + # We cannot seem to hardcode it, guess we'll fake it. + add_dir=-L$libdir + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + func_append add_dir " -L$inst_prefix_dir$libdir" + ;; + esac + fi + add=-l$name + fi + + if test prog = "$linkmode"; then + test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" + test -n "$add" && finalize_deplibs="$add $finalize_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + fi + fi + elif test prog = "$linkmode"; then + # Here we assume that one of hardcode_direct or hardcode_minus_L + # is not unsupported. This is valid on all known static and + # shared platforms. + if test unsupported != "$hardcode_direct"; then + test -n "$old_library" && linklib=$old_library + compile_deplibs="$dir/$linklib $compile_deplibs" + finalize_deplibs="$dir/$linklib $finalize_deplibs" + else + compile_deplibs="-l$name -L$dir $compile_deplibs" + finalize_deplibs="-l$name -L$dir $finalize_deplibs" + fi + elif test yes = "$build_libtool_libs"; then + # Not a shared library + if test pass_all != "$deplibs_check_method"; then + # We're trying link a shared library against a static one + # but the system doesn't support it. + + # Just print a warning and add the library to dependency_libs so + # that the program can be linked against the static library. + echo + $ECHO "*** Warning: This system cannot link to static lib archive $lib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have." + if test yes = "$module"; then + echo "*** But as you try to build a module library, libtool will still create " + echo "*** a static module, that should work as long as the dlopening application" + echo "*** is linked with the -dlopen flag to resolve symbols at runtime." + if test -z "$global_symbol_pipe"; then + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using 'nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** 'nm' from GNU binutils and a full rebuild may help." + fi + if test no = "$build_old_libs"; then + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + else + deplibs="$dir/$old_library $deplibs" + link_static=yes + fi + fi # link shared/static library? + + if test lib = "$linkmode"; then + if test -n "$dependency_libs" && + { test yes != "$hardcode_into_libs" || + test yes = "$build_old_libs" || + test yes = "$link_static"; }; then + # Extract -R from dependency_libs + temp_deplibs= + for libdir in $dependency_libs; do + case $libdir in + -R*) func_stripname '-R' '' "$libdir" + temp_xrpath=$func_stripname_result + case " $xrpath " in + *" $temp_xrpath "*) ;; + *) func_append xrpath " $temp_xrpath";; + esac;; + *) func_append temp_deplibs " $libdir";; + esac + done + dependency_libs=$temp_deplibs + fi + + func_append newlib_search_path " $absdir" + # Link against this library + test no = "$link_static" && newdependency_libs="$abs_ladir/$laname $newdependency_libs" + # ... and its dependency_libs + tmp_libs= + for deplib in $dependency_libs; do + newdependency_libs="$deplib $newdependency_libs" + case $deplib in + -L*) func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result";; + *) func_resolve_sysroot "$deplib" ;; + esac + if $opt_preserve_dup_deps; then + case "$tmp_libs " in + *" $func_resolve_sysroot_result "*) + func_append specialdeplibs " $func_resolve_sysroot_result" ;; + esac + fi + func_append tmp_libs " $func_resolve_sysroot_result" + done + + if test no != "$link_all_deplibs"; then + # Add the search paths of all dependency libraries + for deplib in $dependency_libs; do + path= + case $deplib in + -L*) path=$deplib ;; + *.la) + func_resolve_sysroot "$deplib" + deplib=$func_resolve_sysroot_result + func_dirname "$deplib" "" "." + dir=$func_dirname_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) absdir=$dir ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + func_warning "cannot determine absolute directory name of '$dir'" + absdir=$dir + fi + ;; + esac + if $GREP "^installed=no" $deplib > /dev/null; then + case $host in + *-*-darwin*) + depdepl= + eval deplibrary_names=`$SED -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` + if test -n "$deplibrary_names"; then + for tmp in $deplibrary_names; do + depdepl=$tmp + done + if test -f "$absdir/$objdir/$depdepl"; then + depdepl=$absdir/$objdir/$depdepl + darwin_install_name=`$OTOOL -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + if test -z "$darwin_install_name"; then + darwin_install_name=`$OTOOL64 -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + fi + func_append compiler_flags " $wl-dylib_file $wl$darwin_install_name:$depdepl" + func_append linker_flags " -dylib_file $darwin_install_name:$depdepl" + path= + fi + fi + ;; + *) + path=-L$absdir/$objdir + ;; + esac + else + eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + test -z "$libdir" && \ + func_fatal_error "'$deplib' is not a valid libtool archive" + test "$absdir" != "$libdir" && \ + func_warning "'$deplib' seems to be moved" + + path=-L$absdir + fi + ;; + esac + case " $deplibs " in + *" $path "*) ;; + *) deplibs="$path $deplibs" ;; + esac + done + fi # link_all_deplibs != no + fi # linkmode = lib + done # for deplib in $libs + if test link = "$pass"; then + if test prog = "$linkmode"; then + compile_deplibs="$new_inherited_linker_flags $compile_deplibs" + finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" + else + compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + fi + fi + dependency_libs=$newdependency_libs + if test dlpreopen = "$pass"; then + # Link the dlpreopened libraries before other libraries + for deplib in $save_deplibs; do + deplibs="$deplib $deplibs" + done + fi + if test dlopen != "$pass"; then + test conv = "$pass" || { + # Make sure lib_search_path contains only unique directories. + lib_search_path= + for dir in $newlib_search_path; do + case "$lib_search_path " in + *" $dir "*) ;; + *) func_append lib_search_path " $dir" ;; + esac + done + newlib_search_path= + } + + if test prog,link = "$linkmode,$pass"; then + vars="compile_deplibs finalize_deplibs" + else + vars=deplibs + fi + for var in $vars dependency_libs; do + # Add libraries to $var in reverse order + eval tmp_libs=\"\$$var\" + new_libs= + for deplib in $tmp_libs; do + # FIXME: Pedantically, this is the right thing to do, so + # that some nasty dependency loop isn't accidentally + # broken: + #new_libs="$deplib $new_libs" + # Pragmatically, this seems to cause very few problems in + # practice: + case $deplib in + -L*) new_libs="$deplib $new_libs" ;; + -R*) ;; + *) + # And here is the reason: when a library appears more + # than once as an explicit dependence of a library, or + # is implicitly linked in more than once by the + # compiler, it is considered special, and multiple + # occurrences thereof are not removed. Compare this + # with having the same library being listed as a + # dependency of multiple other libraries: in this case, + # we know (pedantically, we assume) the library does not + # need to be listed more than once, so we keep only the + # last copy. This is not always right, but it is rare + # enough that we require users that really mean to play + # such unportable linking tricks to link the library + # using -Wl,-lname, so that libtool does not consider it + # for duplicate removal. + case " $specialdeplibs " in + *" $deplib "*) new_libs="$deplib $new_libs" ;; + *) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$deplib $new_libs" ;; + esac + ;; + esac + ;; + esac + done + tmp_libs= + for deplib in $new_libs; do + case $deplib in + -L*) + case " $tmp_libs " in + *" $deplib "*) ;; + *) func_append tmp_libs " $deplib" ;; + esac + ;; + *) func_append tmp_libs " $deplib" ;; + esac + done + eval $var=\"$tmp_libs\" + done # for var + fi + + # Add Sun CC postdeps if required: + test CXX = "$tagname" && { + case $host_os in + linux*) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C++ 5.9 + func_suncc_cstd_abi + + if test no != "$suncc_use_cstd_abi"; then + func_append postdeps ' -library=Cstd -library=Crun' + fi + ;; + esac + ;; + + solaris*) + func_cc_basename "$CC" + case $func_cc_basename_result in + CC* | sunCC*) + func_suncc_cstd_abi + + if test no != "$suncc_use_cstd_abi"; then + func_append postdeps ' -library=Cstd -library=Crun' + fi + ;; + esac + ;; + esac + } + + # Last step: remove runtime libs from dependency_libs + # (they stay in deplibs) + tmp_libs= + for i in $dependency_libs; do + case " $predeps $postdeps $compiler_lib_search_path " in + *" $i "*) + i= + ;; + esac + if test -n "$i"; then + func_append tmp_libs " $i" + fi + done + dependency_libs=$tmp_libs + done # for pass + if test prog = "$linkmode"; then + dlfiles=$newdlfiles + fi + if test prog = "$linkmode" || test lib = "$linkmode"; then + dlprefiles=$newdlprefiles + fi + + case $linkmode in + oldlib) + if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then + func_warning "'-dlopen' is ignored for archives" + fi + + case " $deplibs" in + *\ -l* | *\ -L*) + func_warning "'-l' and '-L' are ignored for archives" ;; + esac + + test -n "$rpath" && \ + func_warning "'-rpath' is ignored for archives" + + test -n "$xrpath" && \ + func_warning "'-R' is ignored for archives" + + test -n "$vinfo" && \ + func_warning "'-version-info/-version-number' is ignored for archives" + + test -n "$release" && \ + func_warning "'-release' is ignored for archives" + + test -n "$export_symbols$export_symbols_regex" && \ + func_warning "'-export-symbols' is ignored for archives" + + # Now set the variables for building old libraries. + build_libtool_libs=no + oldlibs=$output + func_append objs "$old_deplibs" + ;; + + lib) + # Make sure we only generate libraries of the form 'libNAME.la'. + case $outputname in + lib*) + func_stripname 'lib' '.la' "$outputname" + name=$func_stripname_result + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + ;; + *) + test no = "$module" \ + && func_fatal_help "libtool library '$output' must begin with 'lib'" + + if test no != "$need_lib_prefix"; then + # Add the "lib" prefix for modules if required + func_stripname '' '.la' "$outputname" + name=$func_stripname_result + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + else + func_stripname '' '.la' "$outputname" + libname=$func_stripname_result + fi + ;; + esac + + if test -n "$objs"; then + if test pass_all != "$deplibs_check_method"; then + func_fatal_error "cannot build libtool library '$output' from non-libtool objects on this host:$objs" + else + echo + $ECHO "*** Warning: Linking the shared library $output against the non-libtool" + $ECHO "*** objects $objs is not portable!" + func_append libobjs " $objs" + fi + fi + + test no = "$dlself" \ + || func_warning "'-dlopen self' is ignored for libtool libraries" + + set dummy $rpath + shift + test 1 -lt "$#" \ + && func_warning "ignoring multiple '-rpath's for a libtool library" + + install_libdir=$1 + + oldlibs= + if test -z "$rpath"; then + if test yes = "$build_libtool_libs"; then + # Building a libtool convenience library. + # Some compilers have problems with a '.al' extension so + # convenience libraries should have the same extension an + # archive normally would. + oldlibs="$output_objdir/$libname.$libext $oldlibs" + build_libtool_libs=convenience + build_old_libs=yes + fi + + test -n "$vinfo" && \ + func_warning "'-version-info/-version-number' is ignored for convenience libraries" + + test -n "$release" && \ + func_warning "'-release' is ignored for convenience libraries" + else + + # Parse the version information argument. + save_ifs=$IFS; IFS=: + set dummy $vinfo 0 0 0 + shift + IFS=$save_ifs + + test -n "$7" && \ + func_fatal_help "too many parameters to '-version-info'" + + # convert absolute version numbers to libtool ages + # this retains compatibility with .la files and attempts + # to make the code below a bit more comprehensible + + case $vinfo_number in + yes) + number_major=$1 + number_minor=$2 + number_revision=$3 + # + # There are really only two kinds -- those that + # use the current revision as the major version + # and those that subtract age and use age as + # a minor version. But, then there is irix + # that has an extra 1 added just for fun + # + case $version_type in + # correct linux to gnu/linux during the next big refactor + darwin|freebsd-elf|linux|osf|windows|none) + func_arith $number_major + $number_minor + current=$func_arith_result + age=$number_minor + revision=$number_revision + ;; + freebsd-aout|qnx|sunos) + current=$number_major + revision=$number_minor + age=0 + ;; + irix|nonstopux) + func_arith $number_major + $number_minor + current=$func_arith_result + age=$number_minor + revision=$number_minor + lt_irix_increment=no + ;; + esac + ;; + no) + current=$1 + revision=$2 + age=$3 + ;; + esac + + # Check that each of the things are valid numbers. + case $current in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "CURRENT '$current' must be a nonnegative integer" + func_fatal_error "'$vinfo' is not valid version information" + ;; + esac + + case $revision in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "REVISION '$revision' must be a nonnegative integer" + func_fatal_error "'$vinfo' is not valid version information" + ;; + esac + + case $age in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "AGE '$age' must be a nonnegative integer" + func_fatal_error "'$vinfo' is not valid version information" + ;; + esac + + if test "$age" -gt "$current"; then + func_error "AGE '$age' is greater than the current interface number '$current'" + func_fatal_error "'$vinfo' is not valid version information" + fi + + # Calculate the version variables. + major= + versuffix= + verstring= + case $version_type in + none) ;; + + darwin) + # Like Linux, but with the current version available in + # verstring for coding it into the library header + func_arith $current - $age + major=.$func_arith_result + versuffix=$major.$age.$revision + # Darwin ld doesn't like 0 for these options... + func_arith $current + 1 + minor_current=$func_arith_result + xlcverstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision" + verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" + # On Darwin other compilers + case $CC in + nagfor*) + verstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision" + ;; + *) + verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" + ;; + esac + ;; + + freebsd-aout) + major=.$current + versuffix=.$current.$revision + ;; + + freebsd-elf) + func_arith $current - $age + major=.$func_arith_result + versuffix=$major.$age.$revision + ;; + + irix | nonstopux) + if test no = "$lt_irix_increment"; then + func_arith $current - $age + else + func_arith $current - $age + 1 + fi + major=$func_arith_result + + case $version_type in + nonstopux) verstring_prefix=nonstopux ;; + *) verstring_prefix=sgi ;; + esac + verstring=$verstring_prefix$major.$revision + + # Add in all the interfaces that we are compatible with. + loop=$revision + while test 0 -ne "$loop"; do + func_arith $revision - $loop + iface=$func_arith_result + func_arith $loop - 1 + loop=$func_arith_result + verstring=$verstring_prefix$major.$iface:$verstring + done + + # Before this point, $major must not contain '.'. + major=.$major + versuffix=$major.$revision + ;; + + linux) # correct to gnu/linux during the next big refactor + func_arith $current - $age + major=.$func_arith_result + versuffix=$major.$age.$revision + ;; + + osf) + func_arith $current - $age + major=.$func_arith_result + versuffix=.$current.$age.$revision + verstring=$current.$age.$revision + + # Add in all the interfaces that we are compatible with. + loop=$age + while test 0 -ne "$loop"; do + func_arith $current - $loop + iface=$func_arith_result + func_arith $loop - 1 + loop=$func_arith_result + verstring=$verstring:$iface.0 + done + + # Make executables depend on our current version. + func_append verstring ":$current.0" + ;; + + qnx) + major=.$current + versuffix=.$current + ;; + + sco) + major=.$current + versuffix=.$current + ;; + + sunos) + major=.$current + versuffix=.$current.$revision + ;; + + windows) + # Use '-' rather than '.', since we only want one + # extension on DOS 8.3 file systems. + func_arith $current - $age + major=$func_arith_result + versuffix=-$major + ;; + + *) + func_fatal_configuration "unknown library version type '$version_type'" + ;; + esac + + # Clear the version info if we defaulted, and they specified a release. + if test -z "$vinfo" && test -n "$release"; then + major= + case $version_type in + darwin) + # we can't check for "0.0" in archive_cmds due to quoting + # problems, so we reset it completely + verstring= + ;; + *) + verstring=0.0 + ;; + esac + if test no = "$need_version"; then + versuffix= + else + versuffix=.0.0 + fi + fi + + # Remove version info from name if versioning should be avoided + if test yes,no = "$avoid_version,$need_version"; then + major= + versuffix= + verstring= + fi + + # Check to see if the archive will have undefined symbols. + if test yes = "$allow_undefined"; then + if test unsupported = "$allow_undefined_flag"; then + if test yes = "$build_old_libs"; then + func_warning "undefined symbols not allowed in $host shared libraries; building static only" + build_libtool_libs=no + else + func_fatal_error "can't build $host shared library unless -no-undefined is specified" + fi + fi + else + # Don't allow undefined symbols. + allow_undefined_flag=$no_undefined_flag + fi + + fi + + func_generate_dlsyms "$libname" "$libname" : + func_append libobjs " $symfileobj" + test " " = "$libobjs" && libobjs= + + if test relink != "$opt_mode"; then + # Remove our outputs, but don't remove object files since they + # may have been created when compiling PIC objects. + removelist= + tempremovelist=`$ECHO "$output_objdir/*"` + for p in $tempremovelist; do + case $p in + *.$objext | *.gcno) + ;; + $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/$libname$release.*) + if test -n "$precious_files_regex"; then + if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 + then + continue + fi + fi + func_append removelist " $p" + ;; + *) ;; + esac + done + test -n "$removelist" && \ + func_show_eval "${RM}r \$removelist" + fi + + # Now set the variables for building old libraries. + if test yes = "$build_old_libs" && test convenience != "$build_libtool_libs"; then + func_append oldlibs " $output_objdir/$libname.$libext" + + # Transform .lo files to .o files. + oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; $lo2o" | $NL2SP` + fi + + # Eliminate all temporary directories. + #for path in $notinst_path; do + # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"` + # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"` + # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"` + #done + + if test -n "$xrpath"; then + # If the user specified any rpath flags, then add them. + temp_xrpath= + for libdir in $xrpath; do + func_replace_sysroot "$libdir" + func_append temp_xrpath " -R$func_replace_sysroot_result" + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + done + if test yes != "$hardcode_into_libs" || test yes = "$build_old_libs"; then + dependency_libs="$temp_xrpath $dependency_libs" + fi + fi + + # Make sure dlfiles contains only unique files that won't be dlpreopened + old_dlfiles=$dlfiles + dlfiles= + for lib in $old_dlfiles; do + case " $dlprefiles $dlfiles " in + *" $lib "*) ;; + *) func_append dlfiles " $lib" ;; + esac + done + + # Make sure dlprefiles contains only unique files + old_dlprefiles=$dlprefiles + dlprefiles= + for lib in $old_dlprefiles; do + case "$dlprefiles " in + *" $lib "*) ;; + *) func_append dlprefiles " $lib" ;; + esac + done + + if test yes = "$build_libtool_libs"; then + if test -n "$rpath"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) + # these systems don't actually have a c library (as such)! + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C library is in the System framework + func_append deplibs " System.ltframework" + ;; + *-*-netbsd*) + # Don't link with libc until the a.out ld.so is fixed. + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + ;; + *) + # Add libc to deplibs on all other systems if necessary. + if test yes = "$build_libtool_need_lc"; then + func_append deplibs " -lc" + fi + ;; + esac + fi + + # Transform deplibs into only deplibs that can be linked in shared. + name_save=$name + libname_save=$libname + release_save=$release + versuffix_save=$versuffix + major_save=$major + # I'm not sure if I'm treating the release correctly. I think + # release should show up in the -l (ie -lgmp5) so we don't want to + # add it in twice. Is that correct? + release= + versuffix= + major= + newdeplibs= + droppeddeps=no + case $deplibs_check_method in + pass_all) + # Don't check for shared/static. Everything works. + # This might be a little naive. We might want to check + # whether the library exists or not. But this is on + # osf3 & osf4 and I'm not really sure... Just + # implementing what was already the behavior. + newdeplibs=$deplibs + ;; + test_compile) + # This code stresses the "libraries are programs" paradigm to its + # limits. Maybe even breaks it. We compile a program, linking it + # against the deplibs as a proxy for the library. Then we can check + # whether they linked in statically or dynamically with ldd. + $opt_dry_run || $RM conftest.c + cat > conftest.c </dev/null` + $nocaseglob + else + potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` + fi + for potent_lib in $potential_libs; do + # Follow soft links. + if ls -lLd "$potent_lib" 2>/dev/null | + $GREP " -> " >/dev/null; then + continue + fi + # The statement above tries to avoid entering an + # endless loop below, in case of cyclic links. + # We might still enter an endless loop, since a link + # loop can be closed while we follow links, + # but so what? + potlib=$potent_lib + while test -h "$potlib" 2>/dev/null; do + potliblink=`ls -ld $potlib | $SED 's/.* -> //'` + case $potliblink in + [\\/]* | [A-Za-z]:[\\/]*) potlib=$potliblink;; + *) potlib=`$ECHO "$potlib" | $SED 's|[^/]*$||'`"$potliblink";; + esac + done + if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | + $SED -e 10q | + $EGREP "$file_magic_regex" > /dev/null; then + func_append newdeplibs " $a_deplib" + a_deplib= + break 2 + fi + done + done + fi + if test -n "$a_deplib"; then + droppeddeps=yes + echo + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib"; then + $ECHO "*** with $libname but no candidates were found. (...for file magic test)" + else + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a file magic. Last file checked: $potlib" + fi + fi + ;; + *) + # Add a -L argument. + func_append newdeplibs " $a_deplib" + ;; + esac + done # Gone through all deplibs. + ;; + match_pattern*) + set dummy $deplibs_check_method; shift + match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + for a_deplib in $deplibs; do + case $a_deplib in + -l*) + func_stripname -l '' "$a_deplib" + name=$func_stripname_result + if test yes = "$allow_libtool_libs_with_static_runtimes"; then + case " $predeps $postdeps " in + *" $a_deplib "*) + func_append newdeplibs " $a_deplib" + a_deplib= + ;; + esac + fi + if test -n "$a_deplib"; then + libname=`eval "\\$ECHO \"$libname_spec\""` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do + potlib=$potent_lib # see symlink-check above in file_magic test + if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ + $EGREP "$match_pattern_regex" > /dev/null; then + func_append newdeplibs " $a_deplib" + a_deplib= + break 2 + fi + done + done + fi + if test -n "$a_deplib"; then + droppeddeps=yes + echo + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib"; then + $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" + else + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a regex pattern. Last file checked: $potlib" + fi + fi + ;; + *) + # Add a -L argument. + func_append newdeplibs " $a_deplib" + ;; + esac + done # Gone through all deplibs. + ;; + none | unknown | *) + newdeplibs= + tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'` + if test yes = "$allow_libtool_libs_with_static_runtimes"; then + for i in $predeps $postdeps; do + # can't use Xsed below, because $i might contain '/' + tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s|$i||"` + done + fi + case $tmp_deplibs in + *[!\ \ ]*) + echo + if test none = "$deplibs_check_method"; then + echo "*** Warning: inter-library dependencies are not supported in this platform." + else + echo "*** Warning: inter-library dependencies are not known to be supported." + fi + echo "*** All declared inter-library dependencies are being dropped." + droppeddeps=yes + ;; + esac + ;; + esac + versuffix=$versuffix_save + major=$major_save + release=$release_save + libname=$libname_save + name=$name_save + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library with the System framework + newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'` + ;; + esac + + if test yes = "$droppeddeps"; then + if test yes = "$module"; then + echo + echo "*** Warning: libtool could not satisfy all declared inter-library" + $ECHO "*** dependencies of module $libname. Therefore, libtool will create" + echo "*** a static module, that should work as long as the dlopening" + echo "*** application is linked with the -dlopen flag." + if test -z "$global_symbol_pipe"; then + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using 'nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** 'nm' from GNU binutils and a full rebuild may help." + fi + if test no = "$build_old_libs"; then + oldlibs=$output_objdir/$libname.$libext + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + else + echo "*** The inter-library dependencies that have been dropped here will be" + echo "*** automatically added whenever a program is linked with this library" + echo "*** or is declared to -dlopen it." + + if test no = "$allow_undefined"; then + echo + echo "*** Since this library must not contain undefined symbols," + echo "*** because either the platform does not support them or" + echo "*** it was explicitly requested with -no-undefined," + echo "*** libtool will only create a static version of it." + if test no = "$build_old_libs"; then + oldlibs=$output_objdir/$libname.$libext + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + fi + fi + # Done checking deplibs! + deplibs=$newdeplibs + fi + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + case $host in + *-*-darwin*) + newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; + esac + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $deplibs " in + *" -L$path/$objdir "*) + func_append new_libs " -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) func_append new_libs " $deplib" ;; + esac + ;; + *) func_append new_libs " $deplib" ;; + esac + done + deplibs=$new_libs + + # All the library-specific variables (install_libdir is set above). + library_names= + old_library= + dlname= + + # Test again, we may have decided not to build it any more + if test yes = "$build_libtool_libs"; then + # Remove $wl instances when linking with ld. + # FIXME: should test the right _cmds variable. + case $archive_cmds in + *\$LD\ *) wl= ;; + esac + if test yes = "$hardcode_into_libs"; then + # Hardcode the library paths + hardcode_libdirs= + dep_rpath= + rpath=$finalize_rpath + test relink = "$opt_mode" || rpath=$compile_rpath$rpath + for libdir in $rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + func_replace_sysroot "$libdir" + libdir=$func_replace_sysroot_result + if test -z "$hardcode_libdirs"; then + hardcode_libdirs=$libdir + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + func_append dep_rpath " $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) func_append perm_rpath " $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir=$hardcode_libdirs + eval "dep_rpath=\"$hardcode_libdir_flag_spec\"" + fi + if test -n "$runpath_var" && test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + func_append rpath "$dir:" + done + eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" + fi + test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" + fi + + shlibpath=$finalize_shlibpath + test relink = "$opt_mode" || shlibpath=$compile_shlibpath$shlibpath + if test -n "$shlibpath"; then + eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" + fi + + # Get the real and link names of the library. + eval shared_ext=\"$shrext_cmds\" + eval library_names=\"$library_names_spec\" + set dummy $library_names + shift + realname=$1 + shift + + if test -n "$soname_spec"; then + eval soname=\"$soname_spec\" + else + soname=$realname + fi + if test -z "$dlname"; then + dlname=$soname + fi + + lib=$output_objdir/$realname + linknames= + for link + do + func_append linknames " $link" + done + + # Use standard objects if they are pic + test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP` + test "X$libobjs" = "X " && libobjs= + + delfiles= + if test -n "$export_symbols" && test -n "$include_expsyms"; then + $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" + export_symbols=$output_objdir/$libname.uexp + func_append delfiles " $export_symbols" + fi + + orig_export_symbols= + case $host_os in + cygwin* | mingw* | cegcc*) + if test -n "$export_symbols" && test -z "$export_symbols_regex"; then + # exporting using user supplied symfile + func_dll_def_p "$export_symbols" || { + # and it's NOT already a .def file. Must figure out + # which of the given symbols are data symbols and tag + # them as such. So, trigger use of export_symbols_cmds. + # export_symbols gets reassigned inside the "prepare + # the list of exported symbols" if statement, so the + # include_expsyms logic still works. + orig_export_symbols=$export_symbols + export_symbols= + always_export_symbols=yes + } + fi + ;; + esac + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + if test yes = "$always_export_symbols" || test -n "$export_symbols_regex"; then + func_verbose "generating symbol list for '$libname.la'" + export_symbols=$output_objdir/$libname.exp + $opt_dry_run || $RM $export_symbols + cmds=$export_symbols_cmds + save_ifs=$IFS; IFS='~' + for cmd1 in $cmds; do + IFS=$save_ifs + # Take the normal branch if the nm_file_list_spec branch + # doesn't work or if tool conversion is not needed. + case $nm_file_list_spec~$to_tool_file_cmd in + *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*) + try_normal_branch=yes + eval cmd=\"$cmd1\" + func_len " $cmd" + len=$func_len_result + ;; + *) + try_normal_branch=no + ;; + esac + if test yes = "$try_normal_branch" \ + && { test "$len" -lt "$max_cmd_len" \ + || test "$max_cmd_len" -le -1; } + then + func_show_eval "$cmd" 'exit $?' + skipped_export=false + elif test -n "$nm_file_list_spec"; then + func_basename "$output" + output_la=$func_basename_result + save_libobjs=$libobjs + save_output=$output + output=$output_objdir/$output_la.nm + func_to_tool_file "$output" + libobjs=$nm_file_list_spec$func_to_tool_file_result + func_append delfiles " $output" + func_verbose "creating $NM input file list: $output" + for obj in $save_libobjs; do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" + done > "$output" + eval cmd=\"$cmd1\" + func_show_eval "$cmd" 'exit $?' + output=$save_output + libobjs=$save_libobjs + skipped_export=false + else + # The command line is too long to execute in one step. + func_verbose "using reloadable object file for export list..." + skipped_export=: + # Break out early, otherwise skipped_export may be + # set to false by a later but shorter cmd. + break + fi + done + IFS=$save_ifs + if test -n "$export_symbols_regex" && test : != "$skipped_export"; then + func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + func_show_eval '$MV "${export_symbols}T" "$export_symbols"' + fi + fi + fi + + if test -n "$export_symbols" && test -n "$include_expsyms"; then + tmp_export_symbols=$export_symbols + test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols + $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' + fi + + if test : != "$skipped_export" && test -n "$orig_export_symbols"; then + # The given exports_symbols file has to be filtered, so filter it. + func_verbose "filter symbol list for '$libname.la' to tag DATA exports" + # FIXME: $output_objdir/$libname.filter potentially contains lots of + # 's' commands, which not all seds can handle. GNU sed should be fine + # though. Also, the filter scales superlinearly with the number of + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter + func_append delfiles " $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi + + tmp_deplibs= + for test_deplib in $deplibs; do + case " $convenience " in + *" $test_deplib "*) ;; + *) + func_append tmp_deplibs " $test_deplib" + ;; + esac + done + deplibs=$tmp_deplibs + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec" && + test yes = "$compiler_needs_object" && + test -z "$libobjs"; then + # extract the archives, so we have objects to list. + # TODO: could optimize this to just extract one archive. + whole_archive_flag_spec= + fi + if test -n "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= + else + gentop=$output_objdir/${outputname}x + func_append generated " $gentop" + + func_extract_archives $gentop $convenience + func_append libobjs " $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= + fi + fi + + if test yes = "$thread_safe" && test -n "$thread_safe_flag_spec"; then + eval flag=\"$thread_safe_flag_spec\" + func_append linker_flags " $flag" + fi + + # Make a backup of the uninstalled library when relinking + if test relink = "$opt_mode"; then + $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? + fi + + # Do each of the archive commands. + if test yes = "$module" && test -n "$module_cmds"; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + eval test_cmds=\"$module_expsym_cmds\" + cmds=$module_expsym_cmds + else + eval test_cmds=\"$module_cmds\" + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + eval test_cmds=\"$archive_expsym_cmds\" + cmds=$archive_expsym_cmds + else + eval test_cmds=\"$archive_cmds\" + cmds=$archive_cmds + fi + fi + + if test : != "$skipped_export" && + func_len " $test_cmds" && + len=$func_len_result && + test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + : + else + # The command line is too long to link in one step, link piecewise + # or, if using GNU ld and skipped_export is not :, use a linker + # script. + + # Save the value of $output and $libobjs because we want to + # use them later. If we have whole_archive_flag_spec, we + # want to use save_libobjs as it was before + # whole_archive_flag_spec was expanded, because we can't + # assume the linker understands whole_archive_flag_spec. + # This may have to be revisited, in case too many + # convenience libraries get linked in and end up exceeding + # the spec. + if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + fi + save_output=$output + func_basename "$output" + output_la=$func_basename_result + + # Clear the reloadable object creation command queue and + # initialize k to one. + test_cmds= + concat_cmds= + objlist= + last_robj= + k=1 + + if test -n "$save_libobjs" && test : != "$skipped_export" && test yes = "$with_gnu_ld"; then + output=$output_objdir/$output_la.lnkscript + func_verbose "creating GNU ld script: $output" + echo 'INPUT (' > $output + for obj in $save_libobjs + do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" >> $output + done + echo ')' >> $output + func_append delfiles " $output" + func_to_tool_file "$output" + output=$func_to_tool_file_result + elif test -n "$save_libobjs" && test : != "$skipped_export" && test -n "$file_list_spec"; then + output=$output_objdir/$output_la.lnk + func_verbose "creating linker input file list: $output" + : > $output + set x $save_libobjs + shift + firstobj= + if test yes = "$compiler_needs_object"; then + firstobj="$1 " + shift + fi + for obj + do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" >> $output + done + func_append delfiles " $output" + func_to_tool_file "$output" + output=$firstobj\"$file_list_spec$func_to_tool_file_result\" + else + if test -n "$save_libobjs"; then + func_verbose "creating reloadable object files..." + output=$output_objdir/$output_la-$k.$objext + eval test_cmds=\"$reload_cmds\" + func_len " $test_cmds" + len0=$func_len_result + len=$len0 + + # Loop over the list of objects to be linked. + for obj in $save_libobjs + do + func_len " $obj" + func_arith $len + $func_len_result + len=$func_arith_result + if test -z "$objlist" || + test "$len" -lt "$max_cmd_len"; then + func_append objlist " $obj" + else + # The command $test_cmds is almost too long, add a + # command to the queue. + if test 1 -eq "$k"; then + # The first file doesn't have a previous command to add. + reload_objs=$objlist + eval concat_cmds=\"$reload_cmds\" + else + # All subsequent reloadable object files will link in + # the last one created. + reload_objs="$objlist $last_robj" + eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" + fi + last_robj=$output_objdir/$output_la-$k.$objext + func_arith $k + 1 + k=$func_arith_result + output=$output_objdir/$output_la-$k.$objext + objlist=" $obj" + func_len " $last_robj" + func_arith $len0 + $func_len_result + len=$func_arith_result + fi + done + # Handle the remaining objects by creating one last + # reloadable object file. All subsequent reloadable object + # files will link in the last one created. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + reload_objs="$objlist $last_robj" + eval concat_cmds=\"\$concat_cmds$reload_cmds\" + if test -n "$last_robj"; then + eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" + fi + func_append delfiles " $output" + + else + output= + fi + + ${skipped_export-false} && { + func_verbose "generating symbol list for '$libname.la'" + export_symbols=$output_objdir/$libname.exp + $opt_dry_run || $RM $export_symbols + libobjs=$output + # Append the command to create the export file. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" + if test -n "$last_robj"; then + eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" + fi + } + + test -n "$save_libobjs" && + func_verbose "creating a temporary reloadable object file: $output" + + # Loop through the commands generated above and execute them. + save_ifs=$IFS; IFS='~' + for cmd in $concat_cmds; do + IFS=$save_ifs + $opt_quiet || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" + } + $opt_dry_run || eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test relink = "$opt_mode"; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) + fi + + exit $lt_exit + } + done + IFS=$save_ifs + + if test -n "$export_symbols_regex" && ${skipped_export-false}; then + func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + func_show_eval '$MV "${export_symbols}T" "$export_symbols"' + fi + fi + + ${skipped_export-false} && { + if test -n "$export_symbols" && test -n "$include_expsyms"; then + tmp_export_symbols=$export_symbols + test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols + $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' + fi + + if test -n "$orig_export_symbols"; then + # The given exports_symbols file has to be filtered, so filter it. + func_verbose "filter symbol list for '$libname.la' to tag DATA exports" + # FIXME: $output_objdir/$libname.filter potentially contains lots of + # 's' commands, which not all seds can handle. GNU sed should be fine + # though. Also, the filter scales superlinearly with the number of + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter + func_append delfiles " $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi + } + + libobjs=$output + # Restore the value of output. + output=$save_output + + if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= + fi + # Expand the library linking commands again to reset the + # value of $libobjs for piecewise linking. + + # Do each of the archive commands. + if test yes = "$module" && test -n "$module_cmds"; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + cmds=$module_expsym_cmds + else + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + cmds=$archive_expsym_cmds + else + cmds=$archive_cmds + fi + fi + fi + + if test -n "$delfiles"; then + # Append the command to remove temporary files to $cmds. + eval cmds=\"\$cmds~\$RM $delfiles\" + fi + + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop=$output_objdir/${outputname}x + func_append generated " $gentop" + + func_extract_archives $gentop $dlprefiles + func_append libobjs " $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= + fi + + save_ifs=$IFS; IFS='~' + for cmd in $cmds; do + IFS=$sp$nl + eval cmd=\"$cmd\" + IFS=$save_ifs + $opt_quiet || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" + } + $opt_dry_run || eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test relink = "$opt_mode"; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) + fi + + exit $lt_exit + } + done + IFS=$save_ifs + + # Restore the uninstalled library and exit + if test relink = "$opt_mode"; then + $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? + + if test -n "$convenience"; then + if test -z "$whole_archive_flag_spec"; then + func_show_eval '${RM}r "$gentop"' + fi + fi + + exit $EXIT_SUCCESS + fi + + # Create links to the real library. + for linkname in $linknames; do + if test "$realname" != "$linkname"; then + func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' + fi + done + + # If -module or -export-dynamic was specified, set the dlname. + if test yes = "$module" || test yes = "$export_dynamic"; then + # On all known operating systems, these are identical. + dlname=$soname + fi + fi + ;; + + obj) + if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then + func_warning "'-dlopen' is ignored for objects" + fi + + case " $deplibs" in + *\ -l* | *\ -L*) + func_warning "'-l' and '-L' are ignored for objects" ;; + esac + + test -n "$rpath" && \ + func_warning "'-rpath' is ignored for objects" + + test -n "$xrpath" && \ + func_warning "'-R' is ignored for objects" + + test -n "$vinfo" && \ + func_warning "'-version-info' is ignored for objects" + + test -n "$release" && \ + func_warning "'-release' is ignored for objects" + + case $output in + *.lo) + test -n "$objs$old_deplibs" && \ + func_fatal_error "cannot build library object '$output' from non-libtool objects" + + libobj=$output + func_lo2o "$libobj" + obj=$func_lo2o_result + ;; + *) + libobj= + obj=$output + ;; + esac + + # Delete the old objects. + $opt_dry_run || $RM $obj $libobj + + # Objects from convenience libraries. This assumes + # single-version convenience libraries. Whenever we create + # different ones for PIC/non-PIC, this we'll have to duplicate + # the extraction. + reload_conv_objs= + gentop= + # if reload_cmds runs $LD directly, get rid of -Wl from + # whole_archive_flag_spec and hope we can get by with turning comma + # into space. + case $reload_cmds in + *\$LD[\ \$]*) wl= ;; + esac + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec"; then + eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" + test -n "$wl" || tmp_whole_archive_flags=`$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` + reload_conv_objs=$reload_objs\ $tmp_whole_archive_flags + else + gentop=$output_objdir/${obj}x + func_append generated " $gentop" + + func_extract_archives $gentop $convenience + reload_conv_objs="$reload_objs $func_extract_archives_result" + fi + fi + + # If we're not building shared, we need to use non_pic_objs + test yes = "$build_libtool_libs" || libobjs=$non_pic_objects + + # Create the old-style object. + reload_objs=$objs$old_deplibs' '`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; /\.lib$/d; $lo2o" | $NL2SP`' '$reload_conv_objs + + output=$obj + func_execute_cmds "$reload_cmds" 'exit $?' + + # Exit if we aren't doing a library object file. + if test -z "$libobj"; then + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + exit $EXIT_SUCCESS + fi + + test yes = "$build_libtool_libs" || { + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + # Create an invalid libtool object if no PIC, so that we don't + # accidentally link it into a program. + # $show "echo timestamp > $libobj" + # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? + exit $EXIT_SUCCESS + } + + if test -n "$pic_flag" || test default != "$pic_mode"; then + # Only do commands if we really have different PIC objects. + reload_objs="$libobjs $reload_conv_objs" + output=$libobj + func_execute_cmds "$reload_cmds" 'exit $?' + fi + + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + exit $EXIT_SUCCESS + ;; + + prog) + case $host in + *cygwin*) func_stripname '' '.exe' "$output" + output=$func_stripname_result.exe;; + esac + test -n "$vinfo" && \ + func_warning "'-version-info' is ignored for programs" + + test -n "$release" && \ + func_warning "'-release' is ignored for programs" + + $preload \ + && test unknown,unknown,unknown = "$dlopen_support,$dlopen_self,$dlopen_self_static" \ + && func_warning "'LT_INIT([dlopen])' not used. Assuming no dlopen support." + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library is the System framework + compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'` + finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'` + ;; + esac + + case $host in + *-*-darwin*) + # Don't allow lazy linking, it breaks C++ global constructors + # But is supposedly fixed on 10.4 or later (yay!). + if test CXX = "$tagname"; then + case ${MACOSX_DEPLOYMENT_TARGET-10.0} in + 10.[0123]) + func_append compile_command " $wl-bind_at_load" + func_append finalize_command " $wl-bind_at_load" + ;; + esac + fi + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; + esac + + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $compile_deplibs " in + *" -L$path/$objdir "*) + func_append new_libs " -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $compile_deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) func_append new_libs " $deplib" ;; + esac + ;; + *) func_append new_libs " $deplib" ;; + esac + done + compile_deplibs=$new_libs + + + func_append compile_command " $compile_deplibs" + func_append finalize_command " $finalize_deplibs" + + if test -n "$rpath$xrpath"; then + # If the user specified any rpath flags, then add them. + for libdir in $rpath $xrpath; do + # This is the magic to use -rpath. + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + done + fi + + # Now hardcode the library paths + rpath= + hardcode_libdirs= + for libdir in $compile_rpath $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs=$libdir + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + func_append rpath " $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) func_append perm_rpath " $libdir" ;; + esac + fi + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + testbindir=`$ECHO "$libdir" | $SED -e 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$libdir:"*) ;; + ::) dllsearchpath=$libdir;; + *) func_append dllsearchpath ":$libdir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + ::) dllsearchpath=$testbindir;; + *) func_append dllsearchpath ":$testbindir";; + esac + ;; + esac + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir=$hardcode_libdirs + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + compile_rpath=$rpath + + rpath= + hardcode_libdirs= + for libdir in $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs=$libdir + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + func_append rpath " $flag" + fi + elif test -n "$runpath_var"; then + case "$finalize_perm_rpath " in + *" $libdir "*) ;; + *) func_append finalize_perm_rpath " $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir=$hardcode_libdirs + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + finalize_rpath=$rpath + + if test -n "$libobjs" && test yes = "$build_old_libs"; then + # Transform all the library objects into standard objects. + compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP` + finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP` + fi + + func_generate_dlsyms "$outputname" "@PROGRAM@" false + + # template prelinking step + if test -n "$prelink_cmds"; then + func_execute_cmds "$prelink_cmds" 'exit $?' + fi + + wrappers_required=: + case $host in + *cegcc* | *mingw32ce*) + # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. + wrappers_required=false + ;; + *cygwin* | *mingw* ) + test yes = "$build_libtool_libs" || wrappers_required=false + ;; + *) + if test no = "$need_relink" || test yes != "$build_libtool_libs"; then + wrappers_required=false + fi + ;; + esac + $wrappers_required || { + # Replace the output file specification. + compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'` + link_command=$compile_command$compile_rpath + + # We have no uninstalled library dependencies, so finalize right now. + exit_status=0 + func_show_eval "$link_command" 'exit_status=$?' + + if test -n "$postlink_cmds"; then + func_to_tool_file "$output" + postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` + func_execute_cmds "$postlink_cmds" 'exit $?' + fi + + # Delete the generated files. + if test -f "$output_objdir/${outputname}S.$objext"; then + func_show_eval '$RM "$output_objdir/${outputname}S.$objext"' + fi + + exit $exit_status + } + + if test -n "$compile_shlibpath$finalize_shlibpath"; then + compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" + fi + if test -n "$finalize_shlibpath"; then + finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" + fi + + compile_var= + finalize_var= + if test -n "$runpath_var"; then + if test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + func_append rpath "$dir:" + done + compile_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + if test -n "$finalize_perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $finalize_perm_rpath; do + func_append rpath "$dir:" + done + finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + fi + + if test yes = "$no_install"; then + # We don't need to create a wrapper script. + link_command=$compile_var$compile_command$compile_rpath + # Replace the output file specification. + link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'` + # Delete the old output file. + $opt_dry_run || $RM $output + # Link the executable and exit + func_show_eval "$link_command" 'exit $?' + + if test -n "$postlink_cmds"; then + func_to_tool_file "$output" + postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` + func_execute_cmds "$postlink_cmds" 'exit $?' + fi + + exit $EXIT_SUCCESS + fi + + case $hardcode_action,$fast_install in + relink,*) + # Fast installation is not supported + link_command=$compile_var$compile_command$compile_rpath + relink_command=$finalize_var$finalize_command$finalize_rpath + + func_warning "this platform does not like uninstalled shared libraries" + func_warning "'$output' will be relinked during installation" + ;; + *,yes) + link_command=$finalize_var$compile_command$finalize_rpath + relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` + ;; + *,no) + link_command=$compile_var$compile_command$compile_rpath + relink_command=$finalize_var$finalize_command$finalize_rpath + ;; + *,needless) + link_command=$finalize_var$compile_command$finalize_rpath + relink_command= + ;; + esac + + # Replace the output file specification. + link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` + + # Delete the old output files. + $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname + + func_show_eval "$link_command" 'exit $?' + + if test -n "$postlink_cmds"; then + func_to_tool_file "$output_objdir/$outputname" + postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` + func_execute_cmds "$postlink_cmds" 'exit $?' + fi + + # Now create the wrapper script. + func_verbose "creating $output" + + # Quote the relink command for shipping. + if test -n "$relink_command"; then + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + fi + done + relink_command="(cd `pwd`; $relink_command)" + relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` + fi + + # Only actually do things if not in dry run mode. + $opt_dry_run || { + # win32 will think the script is a binary if it has + # a .exe suffix, so we strip it off here. + case $output in + *.exe) func_stripname '' '.exe' "$output" + output=$func_stripname_result ;; + esac + # test for cygwin because mv fails w/o .exe extensions + case $host in + *cygwin*) + exeext=.exe + func_stripname '' '.exe' "$outputname" + outputname=$func_stripname_result ;; + *) exeext= ;; + esac + case $host in + *cygwin* | *mingw* ) + func_dirname_and_basename "$output" "" "." + output_name=$func_basename_result + output_path=$func_dirname_result + cwrappersource=$output_path/$objdir/lt-$output_name.c + cwrapper=$output_path/$output_name.exe + $RM $cwrappersource $cwrapper + trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 + + func_emit_cwrapperexe_src > $cwrappersource + + # The wrapper executable is built using the $host compiler, + # because it contains $host paths and files. If cross- + # compiling, it, like the target executable, must be + # executed on the $host or under an emulation environment. + $opt_dry_run || { + $LTCC $LTCFLAGS -o $cwrapper $cwrappersource + $STRIP $cwrapper + } + + # Now, create the wrapper script for func_source use: + func_ltwrapper_scriptname $cwrapper + $RM $func_ltwrapper_scriptname_result + trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 + $opt_dry_run || { + # note: this script will not be executed, so do not chmod. + if test "x$build" = "x$host"; then + $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result + else + func_emit_wrapper no > $func_ltwrapper_scriptname_result + fi + } + ;; + * ) + $RM $output + trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 + + func_emit_wrapper no > $output + chmod +x $output + ;; + esac + } + exit $EXIT_SUCCESS + ;; + esac + + # See if we need to build an old-fashioned archive. + for oldlib in $oldlibs; do + + case $build_libtool_libs in + convenience) + oldobjs="$libobjs_save $symfileobj" + addlibs=$convenience + build_libtool_libs=no + ;; + module) + oldobjs=$libobjs_save + addlibs=$old_convenience + build_libtool_libs=no + ;; + *) + oldobjs="$old_deplibs $non_pic_objects" + $preload && test -f "$symfileobj" \ + && func_append oldobjs " $symfileobj" + addlibs=$old_convenience + ;; + esac + + if test -n "$addlibs"; then + gentop=$output_objdir/${outputname}x + func_append generated " $gentop" + + func_extract_archives $gentop $addlibs + func_append oldobjs " $func_extract_archives_result" + fi + + # Do each command in the archive commands. + if test -n "$old_archive_from_new_cmds" && test yes = "$build_libtool_libs"; then + cmds=$old_archive_from_new_cmds + else + + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop=$output_objdir/${outputname}x + func_append generated " $gentop" + + func_extract_archives $gentop $dlprefiles + func_append oldobjs " $func_extract_archives_result" + fi + + # POSIX demands no paths to be encoded in archives. We have + # to avoid creating archives with duplicate basenames if we + # might have to extract them afterwards, e.g., when creating a + # static archive out of a convenience library, or when linking + # the entirety of a libtool archive into another (currently + # not supported by libtool). + if (for obj in $oldobjs + do + func_basename "$obj" + $ECHO "$func_basename_result" + done | sort | sort -uc >/dev/null 2>&1); then + : + else + echo "copying selected object files to avoid basename conflicts..." + gentop=$output_objdir/${outputname}x + func_append generated " $gentop" + func_mkdir_p "$gentop" + save_oldobjs=$oldobjs + oldobjs= + counter=1 + for obj in $save_oldobjs + do + func_basename "$obj" + objbase=$func_basename_result + case " $oldobjs " in + " ") oldobjs=$obj ;; + *[\ /]"$objbase "*) + while :; do + # Make sure we don't pick an alternate name that also + # overlaps. + newobj=lt$counter-$objbase + func_arith $counter + 1 + counter=$func_arith_result + case " $oldobjs " in + *[\ /]"$newobj "*) ;; + *) if test ! -f "$gentop/$newobj"; then break; fi ;; + esac + done + func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" + func_append oldobjs " $gentop/$newobj" + ;; + *) func_append oldobjs " $obj" ;; + esac + done + fi + func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 + tool_oldlib=$func_to_tool_file_result + eval cmds=\"$old_archive_cmds\" + + func_len " $cmds" + len=$func_len_result + if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + cmds=$old_archive_cmds + elif test -n "$archiver_list_spec"; then + func_verbose "using command file archive linking..." + for obj in $oldobjs + do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" + done > $output_objdir/$libname.libcmd + func_to_tool_file "$output_objdir/$libname.libcmd" + oldobjs=" $archiver_list_spec$func_to_tool_file_result" + cmds=$old_archive_cmds + else + # the command line is too long to link in one step, link in parts + func_verbose "using piecewise archive linking..." + save_RANLIB=$RANLIB + RANLIB=: + objlist= + concat_cmds= + save_oldobjs=$oldobjs + oldobjs= + # Is there a better way of finding the last object in the list? + for obj in $save_oldobjs + do + last_oldobj=$obj + done + eval test_cmds=\"$old_archive_cmds\" + func_len " $test_cmds" + len0=$func_len_result + len=$len0 + for obj in $save_oldobjs + do + func_len " $obj" + func_arith $len + $func_len_result + len=$func_arith_result + func_append objlist " $obj" + if test "$len" -lt "$max_cmd_len"; then + : + else + # the above command should be used before it gets too long + oldobjs=$objlist + if test "$obj" = "$last_oldobj"; then + RANLIB=$save_RANLIB + fi + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\$concat_cmds$old_archive_cmds\" + objlist= + len=$len0 + fi + done + RANLIB=$save_RANLIB + oldobjs=$objlist + if test -z "$oldobjs"; then + eval cmds=\"\$concat_cmds\" + else + eval cmds=\"\$concat_cmds~\$old_archive_cmds\" + fi + fi + fi + func_execute_cmds "$cmds" 'exit $?' + done + + test -n "$generated" && \ + func_show_eval "${RM}r$generated" + + # Now create the libtool archive. + case $output in + *.la) + old_library= + test yes = "$build_old_libs" && old_library=$libname.$libext + func_verbose "creating $output" + + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + fi + done + # Quote the link command for shipping. + relink_command="(cd `pwd`; $SHELL \"$progpath\" $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" + relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` + if test yes = "$hardcode_automatic"; then + relink_command= + fi + + # Only create the output if not a dry run. + $opt_dry_run || { + for installed in no yes; do + if test yes = "$installed"; then + if test -z "$install_libdir"; then + break + fi + output=$output_objdir/${outputname}i + # Replace all uninstalled libtool libraries with the installed ones + newdependency_libs= + for deplib in $dependency_libs; do + case $deplib in + *.la) + func_basename "$deplib" + name=$func_basename_result + func_resolve_sysroot "$deplib" + eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result` + test -z "$libdir" && \ + func_fatal_error "'$deplib' is not a valid libtool archive" + func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name" + ;; + -L*) + func_stripname -L '' "$deplib" + func_replace_sysroot "$func_stripname_result" + func_append newdependency_libs " -L$func_replace_sysroot_result" + ;; + -R*) + func_stripname -R '' "$deplib" + func_replace_sysroot "$func_stripname_result" + func_append newdependency_libs " -R$func_replace_sysroot_result" + ;; + *) func_append newdependency_libs " $deplib" ;; + esac + done + dependency_libs=$newdependency_libs + newdlfiles= + + for lib in $dlfiles; do + case $lib in + *.la) + func_basename "$lib" + name=$func_basename_result + eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + test -z "$libdir" && \ + func_fatal_error "'$lib' is not a valid libtool archive" + func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name" + ;; + *) func_append newdlfiles " $lib" ;; + esac + done + dlfiles=$newdlfiles + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + *.la) + # Only pass preopened files to the pseudo-archive (for + # eventual linking with the app. that links it) if we + # didn't already link the preopened objects directly into + # the library: + func_basename "$lib" + name=$func_basename_result + eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + test -z "$libdir" && \ + func_fatal_error "'$lib' is not a valid libtool archive" + func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name" + ;; + esac + done + dlprefiles=$newdlprefiles + else + newdlfiles= + for lib in $dlfiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;; + *) abs=`pwd`"/$lib" ;; + esac + func_append newdlfiles " $abs" + done + dlfiles=$newdlfiles + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;; + *) abs=`pwd`"/$lib" ;; + esac + func_append newdlprefiles " $abs" + done + dlprefiles=$newdlprefiles + fi + $RM $output + # place dlname in correct position for cygwin + # In fact, it would be nice if we could use this code for all target + # systems that can't hard-code library paths into their executables + # and that have no shared library path variable independent of PATH, + # but it turns out we can't easily determine that from inspecting + # libtool variables, so we have to hard-code the OSs to which it + # applies here; at the moment, that means platforms that use the PE + # object format with DLL files. See the long comment at the top of + # tests/bindir.at for full details. + tdlname=$dlname + case $host,$output,$installed,$module,$dlname in + *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) + # If a -bindir argument was supplied, place the dll there. + if test -n "$bindir"; then + func_relative_path "$install_libdir" "$bindir" + tdlname=$func_relative_path_result/$dlname + else + # Otherwise fall back on heuristic. + tdlname=../bin/$dlname + fi + ;; + esac + $ECHO > $output "\ +# $outputname - a libtool library file +# Generated by $PROGRAM (GNU $PACKAGE) $VERSION +# +# Please DO NOT delete this file! +# It is necessary for linking the library. + +# The name that we can dlopen(3). +dlname='$tdlname' + +# Names of this library. +library_names='$library_names' + +# The name of the static archive. +old_library='$old_library' + +# Linker flags that cannot go in dependency_libs. +inherited_linker_flags='$new_inherited_linker_flags' + +# Libraries that this one depends upon. +dependency_libs='$dependency_libs' + +# Names of additional weak libraries provided by this library +weak_library_names='$weak_libs' + +# Version information for $libname. +current=$current +age=$age +revision=$revision + +# Is this an already installed library? +installed=$installed + +# Should we warn about portability when linking against -modules? +shouldnotlink=$module + +# Files to dlopen/dlpreopen +dlopen='$dlfiles' +dlpreopen='$dlprefiles' + +# Directory that this library needs to be installed in: +libdir='$install_libdir'" + if test no,yes = "$installed,$need_relink"; then + $ECHO >> $output "\ +relink_command=\"$relink_command\"" + fi + done + } + + # Do a symbolic link so that the libtool archive can be found in + # LD_LIBRARY_PATH before the program is installed. + func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' + ;; + esac + exit $EXIT_SUCCESS +} + +if test link = "$opt_mode" || test relink = "$opt_mode"; then + func_mode_link ${1+"$@"} +fi + + +# func_mode_uninstall arg... +func_mode_uninstall () +{ + $debug_cmd + + RM=$nonopt + files= + rmforce=false + exit_status=0 + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic=$magic + + for arg + do + case $arg in + -f) func_append RM " $arg"; rmforce=: ;; + -*) func_append RM " $arg" ;; + *) func_append files " $arg" ;; + esac + done + + test -z "$RM" && \ + func_fatal_help "you must specify an RM program" + + rmdirs= + + for file in $files; do + func_dirname "$file" "" "." + dir=$func_dirname_result + if test . = "$dir"; then + odir=$objdir + else + odir=$dir/$objdir + fi + func_basename "$file" + name=$func_basename_result + test uninstall = "$opt_mode" && odir=$dir + + # Remember odir for removal later, being careful to avoid duplicates + if test clean = "$opt_mode"; then + case " $rmdirs " in + *" $odir "*) ;; + *) func_append rmdirs " $odir" ;; + esac + fi + + # Don't error if the file doesn't exist and rm -f was used. + if { test -L "$file"; } >/dev/null 2>&1 || + { test -h "$file"; } >/dev/null 2>&1 || + test -f "$file"; then + : + elif test -d "$file"; then + exit_status=1 + continue + elif $rmforce; then + continue + fi + + rmfiles=$file + + case $name in + *.la) + # Possibly a libtool archive, so verify it. + if func_lalib_p "$file"; then + func_source $dir/$name + + # Delete the libtool libraries and symlinks. + for n in $library_names; do + func_append rmfiles " $odir/$n" + done + test -n "$old_library" && func_append rmfiles " $odir/$old_library" + + case $opt_mode in + clean) + case " $library_names " in + *" $dlname "*) ;; + *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;; + esac + test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i" + ;; + uninstall) + if test -n "$library_names"; then + # Do each command in the postuninstall commands. + func_execute_cmds "$postuninstall_cmds" '$rmforce || exit_status=1' + fi + + if test -n "$old_library"; then + # Do each command in the old_postuninstall commands. + func_execute_cmds "$old_postuninstall_cmds" '$rmforce || exit_status=1' + fi + # FIXME: should reinstall the best remaining shared library. + ;; + esac + fi + ;; + + *.lo) + # Possibly a libtool object, so verify it. + if func_lalib_p "$file"; then + + # Read the .lo file + func_source $dir/$name + + # Add PIC object to the list of files to remove. + if test -n "$pic_object" && test none != "$pic_object"; then + func_append rmfiles " $dir/$pic_object" + fi + + # Add non-PIC object to the list of files to remove. + if test -n "$non_pic_object" && test none != "$non_pic_object"; then + func_append rmfiles " $dir/$non_pic_object" + fi + fi + ;; + + *) + if test clean = "$opt_mode"; then + noexename=$name + case $file in + *.exe) + func_stripname '' '.exe' "$file" + file=$func_stripname_result + func_stripname '' '.exe' "$name" + noexename=$func_stripname_result + # $file with .exe has already been added to rmfiles, + # add $file without .exe + func_append rmfiles " $file" + ;; + esac + # Do a test to see if this is a libtool program. + if func_ltwrapper_p "$file"; then + if func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + relink_command= + func_source $func_ltwrapper_scriptname_result + func_append rmfiles " $func_ltwrapper_scriptname_result" + else + relink_command= + func_source $dir/$noexename + fi + + # note $name still contains .exe if it was in $file originally + # as does the version of $file that was added into $rmfiles + func_append rmfiles " $odir/$name $odir/${name}S.$objext" + if test yes = "$fast_install" && test -n "$relink_command"; then + func_append rmfiles " $odir/lt-$name" + fi + if test "X$noexename" != "X$name"; then + func_append rmfiles " $odir/lt-$noexename.c" + fi + fi + fi + ;; + esac + func_show_eval "$RM $rmfiles" 'exit_status=1' + done + + # Try to remove the $objdir's in the directories where we deleted files + for dir in $rmdirs; do + if test -d "$dir"; then + func_show_eval "rmdir $dir >/dev/null 2>&1" + fi + done + + exit $exit_status +} + +if test uninstall = "$opt_mode" || test clean = "$opt_mode"; then + func_mode_uninstall ${1+"$@"} +fi + +test -z "$opt_mode" && { + help=$generic_help + func_fatal_help "you must specify a MODE" +} + +test -z "$exec_cmd" && \ + func_fatal_help "invalid operation mode '$opt_mode'" + +if test -n "$exec_cmd"; then + eval exec "$exec_cmd" + exit $EXIT_FAILURE +fi + +exit $exit_status + + +# The TAGs below are defined such that we never get into a situation +# where we disable both kinds of libraries. Given conflicting +# choices, we go for a static library, that is the most portable, +# since we can't tell whether shared libraries were disabled because +# the user asked for that or because the platform doesn't support +# them. This is particularly important on AIX, because we don't +# support having both static and shared libraries enabled at the same +# time on that platform, so we default to a shared-only configuration. +# If a disable-shared tag is given, we'll fallback to a static-only +# configuration. But we'll never go from static-only to shared-only. + +# ### BEGIN LIBTOOL TAG CONFIG: disable-shared +build_libtool_libs=no +build_old_libs=yes +# ### END LIBTOOL TAG CONFIG: disable-shared + +# ### BEGIN LIBTOOL TAG CONFIG: disable-static +build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` +# ### END LIBTOOL TAG CONFIG: disable-static + +# Local Variables: +# mode:shell-script +# sh-indentation:2 +# End: diff --git a/compat/libjpeg/makcjpeg.st b/compat/libjpeg/makcjpeg.st new file mode 100755 index 0000000..3cbad5e --- /dev/null +++ b/compat/libjpeg/makcjpeg.st @@ -0,0 +1,36 @@ +; Project file for Independent JPEG Group's software +; +; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C. +; Thanks to Frank Moehle, B. Setzepfandt, and Guido Vollbeding. +; +; To use this file, rename it to cjpeg.prj. +; If you are using Turbo C, change filenames beginning with "pc..." to "tc..." +; Read installation instructions before trying to make the program! +; +; +; * * * Output file * * * +cjpeg.ttp +; +; * * * COMPILER OPTIONS * * * +.C[-P] ; absolute calls +.C[-M] ; and no string merging, folks +.C[-w-cln] ; no "constant is long" warnings +.C[-w-par] ; no "parameter xxxx unused" +.C[-w-rch] ; no "unreachable code" +.C[-wsig] ; warn if significant digits may be lost += +; * * * * List of modules * * * * +pcstart.o +cjpeg.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h,jversion.h) +cdjpeg.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +rdswitch.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +rdppm.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +rdgif.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +rdtarga.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +rdbmp.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +rdrle.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +libjpeg.lib ; built by libjpeg.prj +pcfltlib.lib ; floating point library +; the float library can be omitted if you've turned off DCT_FLOAT_SUPPORTED +pcstdlib.lib ; standard library +pcextlib.lib ; extended library diff --git a/compat/libjpeg/makdjpeg.st b/compat/libjpeg/makdjpeg.st new file mode 100755 index 0000000..52179e3 --- /dev/null +++ b/compat/libjpeg/makdjpeg.st @@ -0,0 +1,36 @@ +; Project file for Independent JPEG Group's software +; +; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C. +; Thanks to Frank Moehle, B. Setzepfandt, and Guido Vollbeding. +; +; To use this file, rename it to djpeg.prj. +; If you are using Turbo C, change filenames beginning with "pc..." to "tc..." +; Read installation instructions before trying to make the program! +; +; +; * * * Output file * * * +djpeg.ttp +; +; * * * COMPILER OPTIONS * * * +.C[-P] ; absolute calls +.C[-M] ; and no string merging, folks +.C[-w-cln] ; no "constant is long" warnings +.C[-w-par] ; no "parameter xxxx unused" +.C[-w-rch] ; no "unreachable code" +.C[-wsig] ; warn if significant digits may be lost += +; * * * * List of modules * * * * +pcstart.o +djpeg.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h,jversion.h) +cdjpeg.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +rdcolmap.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +wrppm.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +wrgif.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +wrtarga.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +wrbmp.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +wrrle.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +libjpeg.lib ; built by libjpeg.prj +pcfltlib.lib ; floating point library +; the float library can be omitted if you've turned off DCT_FLOAT_SUPPORTED +pcstdlib.lib ; standard library +pcextlib.lib ; extended library diff --git a/compat/libjpeg/makeadsw.vc6 b/compat/libjpeg/makeadsw.vc6 new file mode 100755 index 0000000..80459c5 --- /dev/null +++ b/compat/libjpeg/makeadsw.vc6 @@ -0,0 +1,77 @@ +Microsoft Developer Studio Workspace File, Format Version 6.00 +# WARNUNG: DIESE ARBEITSBEREICHSDATEI DARF NICHT BEARBEITET ODER GEL™SCHT WERDEN! + +############################################################################### + +Project: "cjpeg"=".\cjpeg.dsp" - Package Owner=<4> + +Package=<5> +{{{ +}}} + +Package=<4> +{{{ +}}} + +############################################################################### + +Project: "djpeg"=".\djpeg.dsp" - Package Owner=<4> + +Package=<5> +{{{ +}}} + +Package=<4> +{{{ +}}} + +############################################################################### + +Project: "jpegtran"=".\jpegtran.dsp" - Package Owner=<4> + +Package=<5> +{{{ +}}} + +Package=<4> +{{{ +}}} + +############################################################################### + +Project: "rdjpgcom"=".\rdjpgcom.dsp" - Package Owner=<4> + +Package=<5> +{{{ +}}} + +Package=<4> +{{{ +}}} + +############################################################################### + +Project: "wrjpgcom"=".\wrjpgcom.dsp" - Package Owner=<4> + +Package=<5> +{{{ +}}} + +Package=<4> +{{{ +}}} + +############################################################################### + +Global: + +Package=<5> +{{{ +}}} + +Package=<3> +{{{ +}}} + +############################################################################### + diff --git a/compat/libjpeg/makeasln.v10 b/compat/libjpeg/makeasln.v10 new file mode 100755 index 0000000..617d9e9 --- /dev/null +++ b/compat/libjpeg/makeasln.v10 @@ -0,0 +1,33 @@ +‹¯¨ +Microsoft Visual Studio Solution File, Format Version 11.00 +# Visual C++ Express 2010 +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "cjpeg", "cjpeg.vcxproj", "{2E7FAAD9-2F58-4BDE-81F2-1D6D3FB8BF57}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "djpeg", "djpeg.vcxproj", "{11043137-B453-4DFA-9010-4D2B9DC1545C}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "jpegtran", "jpegtran.vcxproj", "{025BAC50-51B5-4FFE-BC47-3F920BB4047E}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "rdjpgcom", "rdjpgcom.vcxproj", "{C81513DB-78DC-46BC-BC98-82E745203976}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "wrjpgcom", "wrjpgcom.vcxproj", "{B57065D4-DDDA-4668-BAF5-2D49270C973C}" +EndProject +Global + GlobalSection(SolutionConfigurationPlatforms) = preSolution + Release|Win32 = Release|Win32 + EndGlobalSection + GlobalSection(ProjectConfigurationPlatforms) = postSolution + {2E7FAAD9-2F58-4BDE-81F2-1D6D3FB8BF57}.Release|Win32.ActiveCfg = Release|Win32 + {2E7FAAD9-2F58-4BDE-81F2-1D6D3FB8BF57}.Release|Win32.Build.0 = Release|Win32 + {11043137-B453-4DFA-9010-4D2B9DC1545C}.Release|Win32.ActiveCfg = Release|Win32 + {11043137-B453-4DFA-9010-4D2B9DC1545C}.Release|Win32.Build.0 = Release|Win32 + {025BAC50-51B5-4FFE-BC47-3F920BB4047E}.Release|Win32.ActiveCfg = Release|Win32 + {025BAC50-51B5-4FFE-BC47-3F920BB4047E}.Release|Win32.Build.0 = Release|Win32 + {C81513DB-78DC-46BC-BC98-82E745203976}.Release|Win32.ActiveCfg = Release|Win32 + {C81513DB-78DC-46BC-BC98-82E745203976}.Release|Win32.Build.0 = Release|Win32 + {B57065D4-DDDA-4668-BAF5-2D49270C973C}.Release|Win32.ActiveCfg = Release|Win32 + {B57065D4-DDDA-4668-BAF5-2D49270C973C}.Release|Win32.Build.0 = Release|Win32 + EndGlobalSection + GlobalSection(SolutionProperties) = preSolution + HideSolutionNode = FALSE + EndGlobalSection +EndGlobal diff --git a/compat/libjpeg/makecdep.vc6 b/compat/libjpeg/makecdep.vc6 new file mode 100755 index 0000000..11dff77 --- /dev/null +++ b/compat/libjpeg/makecdep.vc6 @@ -0,0 +1,82 @@ +# Microsoft Developer Studio erstellte Abh„ngigkeitsdatei, einbezogen von cjpeg.mak + +.\cdjpeg.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\cjpeg.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + ".\jversion.h"\ + + +.\rdbmp.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\rdgif.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\rdppm.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\rdrle.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\rdswitch.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\rdtarga.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + diff --git a/compat/libjpeg/makecdsp.vc6 b/compat/libjpeg/makecdsp.vc6 new file mode 100755 index 0000000..3ab5965 --- /dev/null +++ b/compat/libjpeg/makecdsp.vc6 @@ -0,0 +1,130 @@ +# Microsoft Developer Studio Project File - Name="cjpeg" - Package Owner=<4> +# Microsoft Developer Studio Generated Build File, Format Version 6.00 +# ** NICHT BEARBEITEN ** + +# TARGTYPE "Win32 (x86) Console Application" 0x0103 + +CFG=cjpeg - Win32 +!MESSAGE Dies ist kein gltiges Makefile. Zum Erstellen dieses Projekts mit NMAKE +!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und fhren Sie den Befehl +!MESSAGE +!MESSAGE NMAKE /f "cjpeg.mak". +!MESSAGE +!MESSAGE Sie k÷nnen beim Ausfhren von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "cjpeg.mak" CFG="cjpeg - Win32" +!MESSAGE +!MESSAGE Fr die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "cjpeg - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE + +# Begin Project +# PROP AllowPerConfigDependencies 0 +# PROP Scc_ProjName "" +# PROP Scc_LocalPath "" +CPP=cl.exe +RSC=rc.exe +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir ".\cjpeg\Release" +# PROP BASE Intermediate_Dir ".\cjpeg\Release" +# PROP BASE Target_Dir ".\cjpeg" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir ".\cjpeg\Release" +# PROP Intermediate_Dir ".\cjpeg\Release" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir ".\cjpeg" +# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c +# ADD CPP /nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /FD /c +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# Begin Target + +# Name "cjpeg - Win32" +# Begin Group "Quellcodedateien" + +# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat;for;f90" +# Begin Source File + +SOURCE=.\cdjpeg.c +# End Source File +# Begin Source File + +SOURCE=.\cjpeg.c +# End Source File +# Begin Source File + +SOURCE=.\rdbmp.c +# End Source File +# Begin Source File + +SOURCE=.\rdgif.c +# End Source File +# Begin Source File + +SOURCE=.\rdppm.c +# End Source File +# Begin Source File + +SOURCE=.\rdrle.c +# End Source File +# Begin Source File + +SOURCE=.\rdswitch.c +# End Source File +# Begin Source File + +SOURCE=.\rdtarga.c +# End Source File +# End Group +# Begin Group "Header-Dateien" + +# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd" +# Begin Source File + +SOURCE=.\cderror.h +# End Source File +# Begin Source File + +SOURCE=.\cdjpeg.h +# End Source File +# Begin Source File + +SOURCE=.\jconfig.h +# End Source File +# Begin Source File + +SOURCE=.\jerror.h +# End Source File +# Begin Source File + +SOURCE=.\jinclude.h +# End Source File +# Begin Source File + +SOURCE=.\jmorecfg.h +# End Source File +# Begin Source File + +SOURCE=.\jpeglib.h +# End Source File +# Begin Source File + +SOURCE=.\jversion.h +# End Source File +# End Group +# Begin Group "Ressourcendateien" + +# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe" +# End Group +# End Target +# End Project diff --git a/compat/libjpeg/makecfil.v10 b/compat/libjpeg/makecfil.v10 new file mode 100755 index 0000000..a4f81ac --- /dev/null +++ b/compat/libjpeg/makecfil.v10 @@ -0,0 +1,69 @@ +‹¯¨ + + + + {4FC737F1-C7A5-4376-A066-2A32D752A2FF} + cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx + + + {93995380-89BD-4b04-88EB-625FBE52EBFB} + h;hpp;hxx;hm;inl;inc;xsd + + + {67DA6AB6-F800-4c08-8B7A-83BB121AAD01} + rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms + + + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + \ No newline at end of file diff --git a/compat/libjpeg/makecmak.vc6 b/compat/libjpeg/makecmak.vc6 new file mode 100755 index 0000000..bee03bf --- /dev/null +++ b/compat/libjpeg/makecmak.vc6 @@ -0,0 +1,159 @@ +# Microsoft Developer Studio Generated NMAKE File, Based on cjpeg.dsp +!IF "$(CFG)" == "" +CFG=cjpeg - Win32 +!MESSAGE Keine Konfiguration angegeben. cjpeg - Win32 wird als Standard verwendet. +!ENDIF + +!IF "$(CFG)" != "cjpeg - Win32" +!MESSAGE Ungültige Konfiguration "$(CFG)" angegeben. +!MESSAGE Sie können beim Ausführen von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "cjpeg.mak" CFG="cjpeg - Win32" +!MESSAGE +!MESSAGE Für die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "cjpeg - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE +!ERROR Eine ungültige Konfiguration wurde angegeben. +!ENDIF + +!IF "$(OS)" == "Windows_NT" +NULL= +!ELSE +NULL=nul +!ENDIF + +CPP=cl.exe +RSC=rc.exe +OUTDIR=.\cjpeg\Release +INTDIR=.\cjpeg\Release +# Begin Custom Macros +OutDir=.\cjpeg\Release +# End Custom Macros + +ALL : "$(OUTDIR)\cjpeg.exe" + + +CLEAN : + -@erase "$(INTDIR)\cdjpeg.obj" + -@erase "$(INTDIR)\cjpeg.obj" + -@erase "$(INTDIR)\rdbmp.obj" + -@erase "$(INTDIR)\rdgif.obj" + -@erase "$(INTDIR)\rdppm.obj" + -@erase "$(INTDIR)\rdrle.obj" + -@erase "$(INTDIR)\rdswitch.obj" + -@erase "$(INTDIR)\rdtarga.obj" + -@erase "$(INTDIR)\vc60.idb" + -@erase "$(OUTDIR)\cjpeg.exe" + +"$(OUTDIR)" : + if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" + +BSC32=bscmake.exe +BSC32_FLAGS=/nologo /o"$(OUTDIR)\cjpeg.bsc" +BSC32_SBRS= \ + +LINK32=link.exe +LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\cjpeg.pdb" /machine:I386 /out:"$(OUTDIR)\cjpeg.exe" +LINK32_OBJS= \ + "$(INTDIR)\cdjpeg.obj" \ + "$(INTDIR)\cjpeg.obj" \ + "$(INTDIR)\rdbmp.obj" \ + "$(INTDIR)\rdgif.obj" \ + "$(INTDIR)\rdppm.obj" \ + "$(INTDIR)\rdrle.obj" \ + "$(INTDIR)\rdswitch.obj" \ + "$(INTDIR)\rdtarga.obj" + +"$(OUTDIR)\cjpeg.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS) + $(LINK32) @<< + $(LINK32_FLAGS) $(LINK32_OBJS) +<< + +CPP_PROJ=/nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /Fp"$(INTDIR)\cjpeg.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c + +.c{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.c{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + + +!IF "$(NO_EXTERNAL_DEPS)" != "1" +!IF EXISTS("cjpeg.dep") +!INCLUDE "cjpeg.dep" +!ELSE +!MESSAGE Warning: cannot find "cjpeg.dep" +!ENDIF +!ENDIF + + +!IF "$(CFG)" == "cjpeg - Win32" +SOURCE=.\cdjpeg.c + +"$(INTDIR)\cdjpeg.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\cjpeg.c + +"$(INTDIR)\cjpeg.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\rdbmp.c + +"$(INTDIR)\rdbmp.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\rdgif.c + +"$(INTDIR)\rdgif.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\rdppm.c + +"$(INTDIR)\rdppm.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\rdrle.c + +"$(INTDIR)\rdrle.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\rdswitch.c + +"$(INTDIR)\rdswitch.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\rdtarga.c + +"$(INTDIR)\rdtarga.obj" : $(SOURCE) "$(INTDIR)" + + + +!ENDIF + diff --git a/compat/libjpeg/makecvcx.v10 b/compat/libjpeg/makecvcx.v10 new file mode 100755 index 0000000..5df5c68 --- /dev/null +++ b/compat/libjpeg/makecvcx.v10 @@ -0,0 +1,76 @@ +‹¯¨ + + + + Release + Win32 + + + + {2E7FAAD9-2F58-4BDE-81F2-1D6D3FB8BF57} + Win32Proj + cjpeg + + + + Application + false + true + Unicode + + + + + + + + + + false + $(ProjectName)\$(Configuration)\ + $(ProjectName)\$(Configuration)\ + + + + Level3 + NotUsing + Full + true + false + WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS + true + true + 4996 + + + Console + true + true + true + Release\jpeg.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies) + + + + + + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/compat/libjpeg/makeddep.vc6 b/compat/libjpeg/makeddep.vc6 new file mode 100755 index 0000000..f911eba --- /dev/null +++ b/compat/libjpeg/makeddep.vc6 @@ -0,0 +1,82 @@ +# Microsoft Developer Studio erstellte Abh„ngigkeitsdatei, einbezogen von djpeg.mak + +.\cdjpeg.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\djpeg.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + ".\jversion.h"\ + + +.\rdcolmap.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\wrbmp.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\wrgif.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\wrppm.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\wrrle.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\wrtarga.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + diff --git a/compat/libjpeg/makeddsp.vc6 b/compat/libjpeg/makeddsp.vc6 new file mode 100755 index 0000000..f583a0f --- /dev/null +++ b/compat/libjpeg/makeddsp.vc6 @@ -0,0 +1,130 @@ +# Microsoft Developer Studio Project File - Name="djpeg" - Package Owner=<4> +# Microsoft Developer Studio Generated Build File, Format Version 6.00 +# ** NICHT BEARBEITEN ** + +# TARGTYPE "Win32 (x86) Console Application" 0x0103 + +CFG=djpeg - Win32 +!MESSAGE Dies ist kein gltiges Makefile. Zum Erstellen dieses Projekts mit NMAKE +!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und fhren Sie den Befehl +!MESSAGE +!MESSAGE NMAKE /f "djpeg.mak". +!MESSAGE +!MESSAGE Sie k÷nnen beim Ausfhren von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "djpeg.mak" CFG="djpeg - Win32" +!MESSAGE +!MESSAGE Fr die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "djpeg - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE + +# Begin Project +# PROP AllowPerConfigDependencies 0 +# PROP Scc_ProjName "" +# PROP Scc_LocalPath "" +CPP=cl.exe +RSC=rc.exe +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir ".\djpeg\Release" +# PROP BASE Intermediate_Dir ".\djpeg\Release" +# PROP BASE Target_Dir ".\djpeg" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir ".\djpeg\Release" +# PROP Intermediate_Dir ".\djpeg\Release" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir ".\djpeg" +# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c +# ADD CPP /nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /FD /c +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# Begin Target + +# Name "djpeg - Win32" +# Begin Group "Quellcodedateien" + +# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat;for;f90" +# Begin Source File + +SOURCE=.\cdjpeg.c +# End Source File +# Begin Source File + +SOURCE=.\djpeg.c +# End Source File +# Begin Source File + +SOURCE=.\rdcolmap.c +# End Source File +# Begin Source File + +SOURCE=.\wrbmp.c +# End Source File +# Begin Source File + +SOURCE=.\wrgif.c +# End Source File +# Begin Source File + +SOURCE=.\wrppm.c +# End Source File +# Begin Source File + +SOURCE=.\wrrle.c +# End Source File +# Begin Source File + +SOURCE=.\wrtarga.c +# End Source File +# End Group +# Begin Group "Header-Dateien" + +# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd" +# Begin Source File + +SOURCE=.\cderror.h +# End Source File +# Begin Source File + +SOURCE=.\cdjpeg.h +# End Source File +# Begin Source File + +SOURCE=.\jconfig.h +# End Source File +# Begin Source File + +SOURCE=.\jerror.h +# End Source File +# Begin Source File + +SOURCE=.\jinclude.h +# End Source File +# Begin Source File + +SOURCE=.\jmorecfg.h +# End Source File +# Begin Source File + +SOURCE=.\jpeglib.h +# End Source File +# Begin Source File + +SOURCE=.\jversion.h +# End Source File +# End Group +# Begin Group "Ressourcendateien" + +# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe" +# End Group +# End Target +# End Project diff --git a/compat/libjpeg/makedfil.v10 b/compat/libjpeg/makedfil.v10 new file mode 100755 index 0000000..b4a83ab --- /dev/null +++ b/compat/libjpeg/makedfil.v10 @@ -0,0 +1,69 @@ +‹¯¨ + + + + {4FC737F1-C7A5-4376-A066-2A32D752A2FF} + cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx + + + {93995380-89BD-4b04-88EB-625FBE52EBFB} + h;hpp;hxx;hm;inl;inc;xsd + + + {67DA6AB6-F800-4c08-8B7A-83BB121AAD01} + rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms + + + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + \ No newline at end of file diff --git a/compat/libjpeg/makedmak.vc6 b/compat/libjpeg/makedmak.vc6 new file mode 100755 index 0000000..e16487f --- /dev/null +++ b/compat/libjpeg/makedmak.vc6 @@ -0,0 +1,159 @@ +# Microsoft Developer Studio Generated NMAKE File, Based on djpeg.dsp +!IF "$(CFG)" == "" +CFG=djpeg - Win32 +!MESSAGE Keine Konfiguration angegeben. djpeg - Win32 wird als Standard verwendet. +!ENDIF + +!IF "$(CFG)" != "djpeg - Win32" +!MESSAGE Ungültige Konfiguration "$(CFG)" angegeben. +!MESSAGE Sie können beim Ausführen von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "djpeg.mak" CFG="djpeg - Win32" +!MESSAGE +!MESSAGE Für die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "djpeg - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE +!ERROR Eine ungültige Konfiguration wurde angegeben. +!ENDIF + +!IF "$(OS)" == "Windows_NT" +NULL= +!ELSE +NULL=nul +!ENDIF + +CPP=cl.exe +RSC=rc.exe +OUTDIR=.\djpeg\Release +INTDIR=.\djpeg\Release +# Begin Custom Macros +OutDir=.\djpeg\Release +# End Custom Macros + +ALL : "$(OUTDIR)\djpeg.exe" + + +CLEAN : + -@erase "$(INTDIR)\cdjpeg.obj" + -@erase "$(INTDIR)\djpeg.obj" + -@erase "$(INTDIR)\rdcolmap.obj" + -@erase "$(INTDIR)\vc60.idb" + -@erase "$(INTDIR)\wrbmp.obj" + -@erase "$(INTDIR)\wrgif.obj" + -@erase "$(INTDIR)\wrppm.obj" + -@erase "$(INTDIR)\wrrle.obj" + -@erase "$(INTDIR)\wrtarga.obj" + -@erase "$(OUTDIR)\djpeg.exe" + +"$(OUTDIR)" : + if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" + +BSC32=bscmake.exe +BSC32_FLAGS=/nologo /o"$(OUTDIR)\djpeg.bsc" +BSC32_SBRS= \ + +LINK32=link.exe +LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\djpeg.pdb" /machine:I386 /out:"$(OUTDIR)\djpeg.exe" +LINK32_OBJS= \ + "$(INTDIR)\cdjpeg.obj" \ + "$(INTDIR)\djpeg.obj" \ + "$(INTDIR)\rdcolmap.obj" \ + "$(INTDIR)\wrbmp.obj" \ + "$(INTDIR)\wrgif.obj" \ + "$(INTDIR)\wrppm.obj" \ + "$(INTDIR)\wrrle.obj" \ + "$(INTDIR)\wrtarga.obj" + +"$(OUTDIR)\djpeg.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS) + $(LINK32) @<< + $(LINK32_FLAGS) $(LINK32_OBJS) +<< + +CPP_PROJ=/nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /Fp"$(INTDIR)\djpeg.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c + +.c{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.c{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + + +!IF "$(NO_EXTERNAL_DEPS)" != "1" +!IF EXISTS("djpeg.dep") +!INCLUDE "djpeg.dep" +!ELSE +!MESSAGE Warning: cannot find "djpeg.dep" +!ENDIF +!ENDIF + + +!IF "$(CFG)" == "djpeg - Win32" +SOURCE=.\cdjpeg.c + +"$(INTDIR)\cdjpeg.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\djpeg.c + +"$(INTDIR)\djpeg.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\rdcolmap.c + +"$(INTDIR)\rdcolmap.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\wrbmp.c + +"$(INTDIR)\wrbmp.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\wrgif.c + +"$(INTDIR)\wrgif.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\wrppm.c + +"$(INTDIR)\wrppm.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\wrrle.c + +"$(INTDIR)\wrrle.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\wrtarga.c + +"$(INTDIR)\wrtarga.obj" : $(SOURCE) "$(INTDIR)" + + + +!ENDIF + diff --git a/compat/libjpeg/makedvcx.v10 b/compat/libjpeg/makedvcx.v10 new file mode 100755 index 0000000..9ad2d41 --- /dev/null +++ b/compat/libjpeg/makedvcx.v10 @@ -0,0 +1,76 @@ +‹¯¨ + + + + Release + Win32 + + + + {11043137-B453-4DFA-9010-4D2B9DC1545C} + Win32Proj + djpeg + + + + Application + false + true + Unicode + + + + + + + + + + false + $(ProjectName)\$(Configuration)\ + $(ProjectName)\$(Configuration)\ + + + + Level3 + NotUsing + Full + true + false + WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS + true + true + 4996 + + + Console + true + true + true + Release\jpeg.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies) + + + + + + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/compat/libjpeg/makefile.ansi b/compat/libjpeg/makefile.ansi new file mode 100755 index 0000000..d4c15e4 --- /dev/null +++ b/compat/libjpeg/makefile.ansi @@ -0,0 +1,221 @@ +# Makefile for Independent JPEG Group's software + +# This makefile is suitable for Unix-like systems with ANSI-capable compilers. +# If you have a non-ANSI compiler, makefile.unix is a better starting point. + +# Read installation instructions before saying "make" !! + +# The name of your C compiler: +CC= cc + +# You may need to adjust these cc options: +CFLAGS= -O +# Generally, we recommend defining any configuration symbols in jconfig.h, +# NOT via -D switches here. + +# Link-time cc options: +LDFLAGS= + +# To link any special libraries, add the necessary -l commands here. +LDLIBS= + +# Put here the object file name for the correct system-dependent memory +# manager file. For Unix this is usually jmemnobs.o, but you may want +# to use jmemansi.o or jmemname.o if you have limited swap space. +SYSDEPMEM= jmemnobs.o + +# miscellaneous OS-dependent stuff +# linker +LN= $(CC) +# file deletion command +RM= rm -f +# library (.a) file creation command +AR= ar rc +# second step in .a creation (use "touch" if not needed) +AR2= ranlib + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 \ + makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \ + makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 \ + makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 \ + makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 \ + makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 \ + makejsln.v10 makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 \ + makecfil.v10 makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 \ + makervcx.v10 makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac \ + makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st makefile.manx \ + makefile.sas makefile.mms makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \ + missing ar-lib +OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map +TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ + testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.o jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.o jcapistd.o jcarith.o jctrans.o jcparam.o \ + jdatadst.o jcinit.o jcmaster.o jcmarker.o jcmainct.o jcprepct.o \ + jccoefct.o jccolor.o jcsample.o jchuff.o jcdctmgr.o jfdctfst.o \ + jfdctflt.o jfdctint.o +# decompression library object files +DLIBOBJECTS= jdapimin.o jdapistd.o jdarith.o jdtrans.o jdatasrc.o \ + jdmaster.o jdinput.o jdmarker.o jdhuff.o jdmainct.o \ + jdcoefct.o jdpostct.o jddctmgr.o jidctfst.o jidctflt.o \ + jidctint.o jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o +# These objectfiles are included in libjpeg.a +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \ + cdjpeg.o +DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \ + cdjpeg.o +TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o + + +all: libjpeg.a cjpeg djpeg jpegtran rdjpgcom wrjpgcom + +libjpeg.a: $(LIBOBJECTS) + $(RM) libjpeg.a + $(AR) libjpeg.a $(LIBOBJECTS) + $(AR2) libjpeg.a + +cjpeg: $(COBJECTS) libjpeg.a + $(LN) $(LDFLAGS) -o cjpeg $(COBJECTS) libjpeg.a $(LDLIBS) + +djpeg: $(DOBJECTS) libjpeg.a + $(LN) $(LDFLAGS) -o djpeg $(DOBJECTS) libjpeg.a $(LDLIBS) + +jpegtran: $(TROBJECTS) libjpeg.a + $(LN) $(LDFLAGS) -o jpegtran $(TROBJECTS) libjpeg.a $(LDLIBS) + +rdjpgcom: rdjpgcom.o + $(LN) $(LDFLAGS) -o rdjpgcom rdjpgcom.o $(LDLIBS) + +wrjpgcom: wrjpgcom.o + $(LN) $(LDFLAGS) -o wrjpgcom wrjpgcom.o $(LDLIBS) + +jconfig.h: jconfig.txt + echo You must prepare a system-dependent jconfig.h file. + echo Please read the installation directions in install.txt. + exit 1 + +clean: + $(RM) *.o cjpeg djpeg jpegtran libjpeg.a rdjpgcom wrjpgcom + $(RM) core testout* + +test: cjpeg djpeg jpegtran + $(RM) testout* + ./djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + ./djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + ./cjpeg -dct int -outfile testout.jpg testimg.ppm + ./djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + ./cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + ./jpegtran -outfile testoutt.jpg testprog.jpg + cmp testimg.ppm testout.ppm + cmp testimg.bmp testout.bmp + cmp testimg.jpg testout.jpg + cmp testimg.ppm testoutp.ppm + cmp testimgp.jpg testoutp.jpg + cmp testorig.jpg testoutt.jpg + + +jaricom.o: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcarith.o: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdarith.o: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h +jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h +rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h +wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h +cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +transupp.o: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h +rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/compat/libjpeg/makefile.b32 b/compat/libjpeg/makefile.b32 new file mode 100755 index 0000000..ae189b0 --- /dev/null +++ b/compat/libjpeg/makefile.b32 @@ -0,0 +1,243 @@ +# Makefile for Independent JPEG Group's software + +# This makefile is suitable for Borland C on MS-DOS. +# It works with Borland C++ 32-bit for DOS, revision 5.0 or later. +# Thanks to Tom Wright and Ge' Weijers (original DOS) and +# Joe Slater for adding 32-bit additions (needed for Borland +# revision 5.5). + +# Read installation instructions before saying "make" !! + +# The name of your C compiler: +CC= bcc32 + +# You may need to adjust these cc options: +CFLAGS= -O2 -w-par -w-stu -w-ccc -w-rch -w-aus +# -w-par suppresses warnings about unused function parameters +# -w-stu suppresses warnings about incomplete structures +# -w-ccc suppresses warnings about compile-time-constant conditions +# -w-rch suppresses warnings about unreachable code +# Generally, we recommend defining any configuration symbols in jconfig.h, +# NOT via -D switches here. + +# Link-time cc options: +LDFLAGS= +# -lc case-significant link + +# Put here the object file name for the correct system-dependent memory +# manager file. +# SYSDEPMEMLIB must list the same files with "+" signs for the librarian. +SYSDEPMEM= jmemnobs.obj +SYSDEPMEMLIB= +jmemnobs.obj + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 \ + makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \ + makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 \ + makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 \ + makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 \ + makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 \ + makejsln.v10 makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 \ + makecfil.v10 makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 \ + makervcx.v10 makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac \ + makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st makefile.manx \ + makefile.sas makefile.mms makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \ + missing ar-lib +OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map +TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ + testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.obj jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.obj jcapistd.obj jcarith.obj jctrans.obj jcparam.obj \ + jdatadst.obj jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj \ + jcprepct.obj jccoefct.obj jccolor.obj jcsample.obj jchuff.obj \ + jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj +# decompression library object files +DLIBOBJECTS= jdapimin.obj jdapistd.obj jdarith.obj jdtrans.obj jdatasrc.obj \ + jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdmainct.obj \ + jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj jidctflt.obj \ + jidctint.obj jdsample.obj jdcolor.obj jquant1.obj jquant2.obj \ + jdmerge.obj +# These objectfiles are included in libjpeg.lib +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \ + rdswitch.obj cdjpeg.obj +DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \ + rdcolmap.obj cdjpeg.obj +TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj + + +all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe + +libjpeg.lib: $(LIBOBJECTS) + - del libjpeg.lib + tlib libjpeg.lib /E /C @&&| ++jcapimin.obj +jcapistd.obj +jcarith.obj +jctrans.obj +jcparam.obj & ++jdatadst.obj +jcinit.obj +jcmaster.obj +jcmarker.obj +jcmainct.obj & ++jcprepct.obj +jccoefct.obj +jccolor.obj +jcsample.obj +jchuff.obj & ++jcdctmgr.obj +jfdctfst.obj +jfdctflt.obj +jfdctint.obj +jdapimin.obj & ++jdapistd.obj +jdarith.obj +jdtrans.obj +jdatasrc.obj +jdmaster.obj & ++jdinput.obj +jdmarker.obj +jdhuff.obj +jdmainct.obj +jdcoefct.obj & ++jdpostct.obj +jddctmgr.obj +jidctfst.obj +jidctflt.obj +jidctint.obj & ++jdsample.obj +jdcolor.obj +jquant1.obj +jquant2.obj +jdmerge.obj & ++jaricom.obj +jcomapi.obj +jutils.obj +jerror.obj +jmemmgr.obj & +$(SYSDEPMEMLIB) +| + +cjpeg.exe: $(COBJECTS) libjpeg.lib + $(CC) $(LDFLAGS) -ecjpeg.exe $(COBJECTS) libjpeg.lib + +djpeg.exe: $(DOBJECTS) libjpeg.lib + $(CC) $(LDFLAGS) -edjpeg.exe $(DOBJECTS) libjpeg.lib + +jpegtran.exe: $(TROBJECTS) libjpeg.lib + $(CC) $(LDFLAGS) -ejpegtran.exe $(TROBJECTS) libjpeg.lib + +rdjpgcom.exe: rdjpgcom.c + $(CC) $(CFLAGS) rdjpgcom.c + +wrjpgcom.exe: wrjpgcom.c + $(CC) $(CFLAGS) wrjpgcom.c + +# This "{}" syntax allows Borland Make to "batch" source files. +# In this way, each run of the compiler can build many modules. +.c.obj: + $(CC) $(CFLAGS) -c{ $<} + +jconfig.h: jconfig.txt + echo You must prepare a system-dependent jconfig.h file. + echo Please read the installation directions in install.txt. + exit 1 + +clean: + - del *.obj + - del libjpeg.lib + - del cjpeg.exe + - del djpeg.exe + - del jpegtran.exe + - del rdjpgcom.exe + - del wrjpgcom.exe + - del testout*.* + +test: cjpeg.exe djpeg.exe jpegtran.exe + - del testout*.* + djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + cjpeg -dct int -outfile testout.jpg testimg.ppm + djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + jpegtran -outfile testoutt.jpg testprog.jpg + echo n > n.tmp + comp testimg.ppm testout.ppm < n.tmp + comp testimg.bmp testout.bmp < n.tmp + comp testimg.jpg testout.jpg < n.tmp + comp testimg.ppm testoutp.ppm < n.tmp + comp testimgp.jpg testoutp.jpg < n.tmp + comp testorig.jpg testoutt.jpg < n.tmp + del n.tmp + + +jaricom.obj: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcarith.obj: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdarith.obj: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h +jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h +rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h +wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h +cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h +rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +jmemdosa.obj: jmemdosa.asm + tasm /mx jmemdosa.asm diff --git a/compat/libjpeg/makefile.bcc b/compat/libjpeg/makefile.bcc new file mode 100755 index 0000000..c11116e --- /dev/null +++ b/compat/libjpeg/makefile.bcc @@ -0,0 +1,292 @@ +# Makefile for Independent JPEG Group's software + +# This makefile is suitable for Borland C on MS-DOS or OS/2. +# It works with Borland C++ for DOS, revision 3.0 or later, +# and has been tested with Borland C++ for OS/2. +# Watch out for optimization bugs in the OS/2 compilers --- see notes below! +# Thanks to Tom Wright and Ge' Weijers (original DOS) and +# Ken Porter (OS/2) for this file. + +# Read installation instructions before saying "make" !! + +# Are we under DOS or OS/2? +!if !$d(DOS) && !$d(OS2) +!if $d(__OS2__) +OS2=1 +!else +DOS=1 +!endif +!endif + +# The name of your C compiler: +CC= bcc + +# You may need to adjust these cc options: +!if $d(DOS) +CFLAGS= -O2 -mm -w-par -w-stu -w-ccc -w-rch +!else +CFLAGS= -O1 -w-par -w-stu -w-ccc -w-rch +!endif +# -O2 enables full code optimization (for pre-3.0 Borland C++, use -O -G -Z). +# -O2 is buggy in Borland OS/2 C++ revision 2.0, so use -O1 there for now. +# If you have Borland OS/2 C++ revision 1.0, use -O or no optimization at all. +# -mm selects medium memory model (near data, far code pointers; DOS only!) +# -w-par suppresses warnings about unused function parameters +# -w-stu suppresses warnings about incomplete structures +# -w-ccc suppresses warnings about compile-time-constant conditions +# -w-rch suppresses warnings about unreachable code +# Generally, we recommend defining any configuration symbols in jconfig.h, +# NOT via -D switches here. + +# Link-time cc options: +!if $d(DOS) +LDFLAGS= -mm +# memory model option here must match CFLAGS! +!else +LDFLAGS= +# -lai full-screen app +# -lc case-significant link +!endif + +# Put here the object file name for the correct system-dependent memory +# manager file. +# For DOS, we recommend jmemdos.c and jmemdosa.asm. +# For OS/2, we recommend jmemnobs.c (flat memory!) +# SYSDEPMEMLIB must list the same files with "+" signs for the librarian. +!if $d(DOS) +SYSDEPMEM= jmemdos.obj jmemdosa.obj +SYSDEPMEMLIB= +jmemdos.obj +jmemdosa.obj +!else +SYSDEPMEM= jmemnobs.obj +SYSDEPMEMLIB= +jmemnobs.obj +!endif + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 \ + makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \ + makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 \ + makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 \ + makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 \ + makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 \ + makejsln.v10 makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 \ + makecfil.v10 makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 \ + makervcx.v10 makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac \ + makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st makefile.manx \ + makefile.sas makefile.mms makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \ + missing ar-lib +OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map +TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ + testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.obj jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.obj jcapistd.obj jcarith.obj jctrans.obj jcparam.obj \ + jdatadst.obj jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj \ + jcprepct.obj jccoefct.obj jccolor.obj jcsample.obj jchuff.obj \ + jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj +# decompression library object files +DLIBOBJECTS= jdapimin.obj jdapistd.obj jdarith.obj jdtrans.obj jdatasrc.obj \ + jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdmainct.obj \ + jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj jidctflt.obj \ + jidctint.obj jdsample.obj jdcolor.obj jquant1.obj jquant2.obj \ + jdmerge.obj +# These objectfiles are included in libjpeg.lib +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \ + rdswitch.obj cdjpeg.obj +DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \ + rdcolmap.obj cdjpeg.obj +TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj + + +all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe + +libjpeg.lib: $(LIBOBJECTS) + - del libjpeg.lib + tlib libjpeg.lib /E /C @&&| ++jcapimin.obj +jcapistd.obj +jcarith.obj +jctrans.obj +jcparam.obj & ++jdatadst.obj +jcinit.obj +jcmaster.obj +jcmarker.obj +jcmainct.obj & ++jcprepct.obj +jccoefct.obj +jccolor.obj +jcsample.obj +jchuff.obj & ++jcdctmgr.obj +jfdctfst.obj +jfdctflt.obj +jfdctint.obj +jdapimin.obj & ++jdapistd.obj +jdarith.obj +jdtrans.obj +jdatasrc.obj +jdmaster.obj & ++jdinput.obj +jdmarker.obj +jdhuff.obj +jdmainct.obj +jdcoefct.obj & ++jdpostct.obj +jddctmgr.obj +jidctfst.obj +jidctflt.obj +jidctint.obj & ++jdsample.obj +jdcolor.obj +jquant1.obj +jquant2.obj +jdmerge.obj & ++jaricom.obj +jcomapi.obj +jutils.obj +jerror.obj +jmemmgr.obj & +$(SYSDEPMEMLIB) +| + +cjpeg.exe: $(COBJECTS) libjpeg.lib + $(CC) $(LDFLAGS) -ecjpeg.exe $(COBJECTS) libjpeg.lib + +djpeg.exe: $(DOBJECTS) libjpeg.lib + $(CC) $(LDFLAGS) -edjpeg.exe $(DOBJECTS) libjpeg.lib + +jpegtran.exe: $(TROBJECTS) libjpeg.lib + $(CC) $(LDFLAGS) -ejpegtran.exe $(TROBJECTS) libjpeg.lib + +rdjpgcom.exe: rdjpgcom.c +!if $d(DOS) + $(CC) -ms -O rdjpgcom.c +!else + $(CC) $(CFLAGS) rdjpgcom.c +!endif + +# On DOS, wrjpgcom needs large model so it can malloc a 64K chunk +wrjpgcom.exe: wrjpgcom.c +!if $d(DOS) + $(CC) -ml -O wrjpgcom.c +!else + $(CC) $(CFLAGS) wrjpgcom.c +!endif + +# This "{}" syntax allows Borland Make to "batch" source files. +# In this way, each run of the compiler can build many modules. +.c.obj: + $(CC) $(CFLAGS) -c{ $<} + +jconfig.h: jconfig.txt + echo You must prepare a system-dependent jconfig.h file. + echo Please read the installation directions in install.txt. + exit 1 + +clean: + - del *.obj + - del libjpeg.lib + - del cjpeg.exe + - del djpeg.exe + - del jpegtran.exe + - del rdjpgcom.exe + - del wrjpgcom.exe + - del testout*.* + +test: cjpeg.exe djpeg.exe jpegtran.exe + - del testout*.* + djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + cjpeg -dct int -outfile testout.jpg testimg.ppm + djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + jpegtran -outfile testoutt.jpg testprog.jpg +!if $d(DOS) + fc /b testimg.ppm testout.ppm + fc /b testimg.bmp testout.bmp + fc /b testimg.jpg testout.jpg + fc /b testimg.ppm testoutp.ppm + fc /b testimgp.jpg testoutp.jpg + fc /b testorig.jpg testoutt.jpg +!else + echo n > n.tmp + comp testimg.ppm testout.ppm < n.tmp + comp testimg.bmp testout.bmp < n.tmp + comp testimg.jpg testout.jpg < n.tmp + comp testimg.ppm testoutp.ppm < n.tmp + comp testimgp.jpg testoutp.jpg < n.tmp + comp testorig.jpg testoutt.jpg < n.tmp + del n.tmp +!endif + + +jaricom.obj: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcarith.obj: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdarith.obj: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h +jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h +rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h +wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h +cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h +rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +jmemdosa.obj: jmemdosa.asm + tasm /mx jmemdosa.asm diff --git a/compat/libjpeg/makefile.dj b/compat/libjpeg/makefile.dj new file mode 100755 index 0000000..7001a29 --- /dev/null +++ b/compat/libjpeg/makefile.dj @@ -0,0 +1,227 @@ +# Makefile for Independent JPEG Group's software + +# This makefile is for DJGPP (Delorie's GNU C port on MS-DOS), v2.0 or later. +# Thanks to Frank J. Donahoe for this version. + +# Read installation instructions before saying "make" !! + +# The name of your C compiler: +CC= gcc + +# You may need to adjust these cc options: +CFLAGS= -O2 -Wall -I. +# Generally, we recommend defining any configuration symbols in jconfig.h, +# NOT via -D switches here. + +# Link-time cc options: +LDFLAGS= -s + +# To link any special libraries, add the necessary -l commands here. +LDLIBS= + +# Put here the object file name for the correct system-dependent memory +# manager file. For DJGPP this is usually jmemnobs.o, but you could +# use jmemname.o if you want to use named temp files instead of swap space. +SYSDEPMEM= jmemnobs.o + +# miscellaneous OS-dependent stuff +# linker +LN= $(CC) +# file deletion command +RM= del +# library (.a) file creation command +AR= ar rc +# second step in .a creation (use "touch" if not needed) +AR2= ranlib + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 \ + makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \ + makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 \ + makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 \ + makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 \ + makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 \ + makejsln.v10 makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 \ + makecfil.v10 makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 \ + makervcx.v10 makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac \ + makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st makefile.manx \ + makefile.sas makefile.mms makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \ + missing ar-lib +OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map +TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ + testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.o jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.o jcapistd.o jcarith.o jctrans.o jcparam.o \ + jdatadst.o jcinit.o jcmaster.o jcmarker.o jcmainct.o jcprepct.o \ + jccoefct.o jccolor.o jcsample.o jchuff.o jcdctmgr.o jfdctfst.o \ + jfdctflt.o jfdctint.o +# decompression library object files +DLIBOBJECTS= jdapimin.o jdapistd.o jdarith.o jdtrans.o jdatasrc.o \ + jdmaster.o jdinput.o jdmarker.o jdhuff.o jdmainct.o \ + jdcoefct.o jdpostct.o jddctmgr.o jidctfst.o jidctflt.o \ + jidctint.o jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o +# These objectfiles are included in libjpeg.a +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \ + cdjpeg.o +DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \ + cdjpeg.o +TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o + + +all: libjpeg.a cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe + +libjpeg.a: $(LIBOBJECTS) + $(RM) libjpeg.a + $(AR) libjpeg.a $(LIBOBJECTS) + $(AR2) libjpeg.a + +cjpeg.exe: $(COBJECTS) libjpeg.a + $(LN) $(LDFLAGS) -o cjpeg.exe $(COBJECTS) libjpeg.a $(LDLIBS) + +djpeg.exe: $(DOBJECTS) libjpeg.a + $(LN) $(LDFLAGS) -o djpeg.exe $(DOBJECTS) libjpeg.a $(LDLIBS) + +jpegtran.exe: $(TROBJECTS) libjpeg.a + $(LN) $(LDFLAGS) -o jpegtran.exe $(TROBJECTS) libjpeg.a $(LDLIBS) + +rdjpgcom.exe: rdjpgcom.o + $(LN) $(LDFLAGS) -o rdjpgcom.exe rdjpgcom.o $(LDLIBS) + +wrjpgcom.exe: wrjpgcom.o + $(LN) $(LDFLAGS) -o wrjpgcom.exe wrjpgcom.o $(LDLIBS) + +jconfig.h: jconfig.txt + echo You must prepare a system-dependent jconfig.h file. + echo Please read the installation directions in install.txt. + exit 1 + +clean: + $(RM) *.o + $(RM) cjpeg.exe + $(RM) djpeg.exe + $(RM) jpegtran.exe + $(RM) rdjpgcom.exe + $(RM) wrjpgcom.exe + $(RM) libjpeg.a + $(RM) testout*.* + +test: cjpeg.exe djpeg.exe jpegtran.exe + $(RM) testout*.* + ./djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + ./djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + ./cjpeg -dct int -outfile testout.jpg testimg.ppm + ./djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + ./cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + ./jpegtran -outfile testoutt.jpg testprog.jpg + fc /b testimg.ppm testout.ppm + fc /b testimg.bmp testout.bmp + fc /b testimg.jpg testout.jpg + fc /b testimg.ppm testoutp.ppm + fc /b testimgp.jpg testoutp.jpg + fc /b testorig.jpg testoutt.jpg + + +jaricom.o: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcarith.o: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdarith.o: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h +jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h +rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h +wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h +cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +transupp.o: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h +rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/compat/libjpeg/makefile.manx b/compat/libjpeg/makefile.manx new file mode 100755 index 0000000..044cc11 --- /dev/null +++ b/compat/libjpeg/makefile.manx @@ -0,0 +1,221 @@ +# Makefile for Independent JPEG Group's software + +# This makefile is for Amiga systems using Manx Aztec C ver 5.x. +# Thanks to D.J. James (djjames@cup.portal.com) for this version. + +# Read installation instructions before saying "make" !! + +# The name of your C compiler: +CC= cc + +# You may need to adjust these cc options: +# Uncomment for generic 68000 code (will work on any Amiga) +ARCHFLAGS= -sn + +# Uncomment for 68020/68030 code (faster, but won't run on 68000 CPU) +#ARCHFLAGS= -c2 + +CFLAGS= -MC -MD $(ARCHFLAGS) -spfam -r4 + +# Link-time cc options: +LDFLAGS= -g + +# To link any special libraries, add the necessary -l commands here. +LDLIBS= -lml -lcl + +# Put here the object file name for the correct system-dependent memory +# manager file. For Amiga we recommend jmemname.o. +SYSDEPMEM= jmemname.o + +# miscellaneous OS-dependent stuff +# linker +LN= ln +# file deletion command +RM= delete quiet +# library (.lib) file creation command +AR= lb + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 \ + makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \ + makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 \ + makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 \ + makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 \ + makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 \ + makejsln.v10 makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 \ + makecfil.v10 makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 \ + makervcx.v10 makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac \ + makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st makefile.manx \ + makefile.sas makefile.mms makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \ + missing ar-lib +OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map +TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ + testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.o jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.o jcapistd.o jcarith.o jctrans.o jcparam.o \ + jdatadst.o jcinit.o jcmaster.o jcmarker.o jcmainct.o jcprepct.o \ + jccoefct.o jccolor.o jcsample.o jchuff.o jcdctmgr.o jfdctfst.o \ + jfdctflt.o jfdctint.o +# decompression library object files +DLIBOBJECTS= jdapimin.o jdapistd.o jdarith.o jdtrans.o jdatasrc.o \ + jdmaster.o jdinput.o jdmarker.o jdhuff.o jdmainct.o \ + jdcoefct.o jdpostct.o jddctmgr.o jidctfst.o jidctflt.o \ + jidctint.o jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o +# These objectfiles are included in libjpeg.lib +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \ + cdjpeg.o +DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \ + cdjpeg.o +TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o + + +all: libjpeg.lib cjpeg djpeg jpegtran rdjpgcom wrjpgcom + +libjpeg.lib: $(LIBOBJECTS) + -$(RM) libjpeg.lib + $(AR) libjpeg.lib $(LIBOBJECTS) + +cjpeg: $(COBJECTS) libjpeg.lib + $(LN) $(LDFLAGS) -o cjpeg $(COBJECTS) libjpeg.lib $(LDLIBS) + +djpeg: $(DOBJECTS) libjpeg.lib + $(LN) $(LDFLAGS) -o djpeg $(DOBJECTS) libjpeg.lib $(LDLIBS) + +jpegtran: $(TROBJECTS) libjpeg.lib + $(LN) $(LDFLAGS) -o jpegtran $(TROBJECTS) libjpeg.lib $(LDLIBS) + +rdjpgcom: rdjpgcom.o + $(LN) $(LDFLAGS) -o rdjpgcom rdjpgcom.o $(LDLIBS) + +wrjpgcom: wrjpgcom.o + $(LN) $(LDFLAGS) -o wrjpgcom wrjpgcom.o $(LDLIBS) + +jconfig.h: jconfig.txt + echo You must prepare a system-dependent jconfig.h file. + echo Please read the installation directions in install.txt. + exit 1 + +clean: + -$(RM) *.o cjpeg djpeg jpegtran libjpeg.lib rdjpgcom wrjpgcom + -$(RM) core testout*.* + +test: cjpeg djpeg jpegtran + -$(RM) testout*.* + djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + cjpeg -dct int -outfile testout.jpg testimg.ppm + djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + jpegtran -outfile testoutt.jpg testprog.jpg + cmp testimg.ppm testout.ppm + cmp testimg.bmp testout.bmp + cmp testimg.jpg testout.jpg + cmp testimg.ppm testoutp.ppm + cmp testimgp.jpg testoutp.jpg + cmp testorig.jpg testoutt.jpg + + +jaricom.o: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcarith.o: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdarith.o: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h +jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h +rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h +wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h +cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +transupp.o: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h +rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/compat/libjpeg/makefile.mc6 b/compat/libjpeg/makefile.mc6 new file mode 100755 index 0000000..9513bbf --- /dev/null +++ b/compat/libjpeg/makefile.mc6 @@ -0,0 +1,256 @@ +# Makefile for Independent JPEG Group's software + +# This makefile is for Microsoft C for MS-DOS, version 6.00A and up. +# Use NMAKE, not Microsoft's brain-damaged MAKE. +# Thanks to Alan Wright and Chris Turner of Olivetti Research Ltd. + +# Read installation instructions before saying "nmake" !! + +# You may need to adjust these compiler options: +CFLAGS = -AM -Oecigt -Gs -W3 +# -AM medium memory model (or use -AS for small model, if you remove features) +# -Oecigt -Gs maximum safe optimisation (-Ol has bugs in MSC 6.00A) +# -W3 warning level 3 +# You might also want to add -G2 if you have an 80286, etc. +# Generally, we recommend defining any configuration symbols in jconfig.h, +# NOT via -D switches here. + +# Jan-Herman Buining suggests the following switches for MS C 8.0 and a 486: +# CFLAGS = /AM /f- /FPi87 /G3 /Gs /Gy /Ob1 /Oc /Oe /Og /Oi /Ol /On /Oo /Ot \ +# /OV4 /W3 +# except for jquant1.c, which must be compiled with /Oo- to avoid a compiler +# crash. + +# Ingar Steinsland suggests the following switches when building +# a 16-bit Windows DLL: +# CFLAGS = -ALw -Gsw -Zpe -W3 -O2 -Zi -Zd + +# Put here the object file name for the correct system-dependent memory +# manager file. For DOS, we recommend jmemdos.c and jmemdosa.asm. +# (But not for Windows; see install.txt if you use this makefile for Windows.) +SYSDEPMEM= jmemdos.obj jmemdosa.obj +# SYSDEPMEMLIB must list the same files with "+" signs for the librarian. +SYSDEPMEMLIB= +jmemdos.obj +jmemdosa.obj + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 \ + makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \ + makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 \ + makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 \ + makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 \ + makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 \ + makejsln.v10 makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 \ + makecfil.v10 makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 \ + makervcx.v10 makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac \ + makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st makefile.manx \ + makefile.sas makefile.mms makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \ + missing ar-lib +OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map +TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ + testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.obj jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.obj jcapistd.obj jcarith.obj jctrans.obj jcparam.obj \ + jdatadst.obj jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj \ + jcprepct.obj jccoefct.obj jccolor.obj jcsample.obj jchuff.obj \ + jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj +# decompression library object files +DLIBOBJECTS= jdapimin.obj jdapistd.obj jdarith.obj jdtrans.obj jdatasrc.obj \ + jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdmainct.obj \ + jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj jidctflt.obj \ + jidctint.obj jdsample.obj jdcolor.obj jquant1.obj jquant2.obj \ + jdmerge.obj +# These objectfiles are included in libjpeg.lib +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \ + rdswitch.obj cdjpeg.obj +DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \ + rdcolmap.obj cdjpeg.obj +TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj + +# need linker response file because file list > 128 chars +RFILE = libjpeg.ans + + +all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe + +libjpeg.lib: $(LIBOBJECTS) $(RFILE) + del libjpeg.lib + lib @$(RFILE) + +# linker response file for building libjpeg.lib +$(RFILE) : makefile + del $(RFILE) + echo libjpeg.lib >$(RFILE) +# silly want-to-create-it prompt: + echo y >>$(RFILE) + echo +jcapimin.obj +jcapistd.obj +jcarith.obj +jctrans.obj & >>$(RFILE) + echo +jcparam.obj +jdatadst.obj +jcinit.obj +jcmaster.obj & >>$(RFILE) + echo +jcmarker.obj +jcmainct.obj +jcprepct.obj & >>$(RFILE) + echo +jccoefct.obj +jccolor.obj +jcsample.obj +jchuff.obj & >>$(RFILE) + echo +jcdctmgr.obj +jfdctfst.obj +jfdctflt.obj & >>$(RFILE) + echo +jfdctint.obj +jdapimin.obj +jdapistd.obj & >>$(RFILE) + echo +jdarith.obj +jdtrans.obj +jdatasrc.obj +jdmaster.obj & >>$(RFILE) + echo +jdinput.obj +jdmarker.obj +jdhuff.obj +jdmainct.obj & >>$(RFILE) + echo +jdcoefct.obj +jdpostct.obj +jddctmgr.obj & >>$(RFILE) + echo +jidctfst.obj +jidctflt.obj +jidctint.obj & >>$(RFILE) + echo +jdsample.obj +jdcolor.obj +jquant1.obj & >>$(RFILE) + echo +jquant2.obj +jdmerge.obj +jaricom.obj +jcomapi.obj & >>$(RFILE) + echo +jutils.obj +jerror.obj +jmemmgr.obj & >>$(RFILE) + echo $(SYSDEPMEMLIB) ; >>$(RFILE) + +cjpeg.exe: $(COBJECTS) libjpeg.lib + echo $(COBJECTS) >cjpeg.lst + link /STACK:4096 /EXEPACK @cjpeg.lst, cjpeg.exe, , libjpeg.lib, ; + del cjpeg.lst + +djpeg.exe: $(DOBJECTS) libjpeg.lib + echo $(DOBJECTS) >djpeg.lst + link /STACK:4096 /EXEPACK @djpeg.lst, djpeg.exe, , libjpeg.lib, ; + del djpeg.lst + +jpegtran.exe: $(TROBJECTS) libjpeg.lib + link /STACK:4096 /EXEPACK $(TROBJECTS), jpegtran.exe, , libjpeg.lib, ; + +rdjpgcom.exe: rdjpgcom.c + $(CC) -AS -O -W3 rdjpgcom.c + +# wrjpgcom needs large model so it can malloc a 64K chunk +wrjpgcom.exe: wrjpgcom.c + $(CC) -AL -O -W3 wrjpgcom.c + +jconfig.h: jconfig.txt + echo You must prepare a system-dependent jconfig.h file. + echo Please read the installation directions in install.txt. + exit 1 + +clean: + del *.obj + del libjpeg.lib + del cjpeg.exe + del djpeg.exe + del jpegtran.exe + del rdjpgcom.exe + del wrjpgcom.exe + del testout*.* + +test: cjpeg.exe djpeg.exe jpegtran.exe + del testout*.* + djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + cjpeg -dct int -outfile testout.jpg testimg.ppm + djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + jpegtran -outfile testoutt.jpg testprog.jpg + fc /b testimg.ppm testout.ppm + fc /b testimg.bmp testout.bmp + fc /b testimg.jpg testout.jpg + fc /b testimg.ppm testoutp.ppm + fc /b testimgp.jpg testoutp.jpg + fc /b testorig.jpg testoutt.jpg + + +jaricom.obj: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcarith.obj: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdarith.obj: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h +jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h +rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h +wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h +cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h +rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +jmemdosa.obj : jmemdosa.asm + masm /mx $*; diff --git a/compat/libjpeg/makefile.mms b/compat/libjpeg/makefile.mms new file mode 100755 index 0000000..ab5efce --- /dev/null +++ b/compat/libjpeg/makefile.mms @@ -0,0 +1,225 @@ +# Makefile for Independent JPEG Group's software + +# This makefile is for use with MMS on Digital VMS systems. +# Thanks to Rick Dyson (dyson@iowasp.physics.uiowa.edu) +# and Tim Bell (tbell@netcom.com) for their help. + +# Read installation instructions before saying "MMS" !! + +# You may need to adjust these cc options: +CFLAGS= $(CFLAGS) /NoDebug /Optimize +# Generally, we recommend defining any configuration symbols in jconfig.h, +# NOT via /Define switches here. +.ifdef ALPHA +OPT= +.else +OPT= ,Sys$Disk:[]MAKVMS.OPT/Option +.endif + +# Put here the object file name for the correct system-dependent memory +# manager file. For Unix this is usually jmemnobs.o, but you may want +# to use jmemansi.o or jmemname.o if you have limited swap space. +SYSDEPMEM= jmemnobs.obj + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 \ + makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \ + makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 \ + makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 \ + makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 \ + makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 \ + makejsln.v10 makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 \ + makecfil.v10 makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 \ + makervcx.v10 makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac \ + makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st makefile.manx \ + makefile.sas makefile.mms makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \ + missing ar-lib +OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map +TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ + testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.obj jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.obj jcapistd.obj jcarith.obj jctrans.obj jcparam.obj \ + jdatadst.obj jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj \ + jcprepct.obj jccoefct.obj jccolor.obj jcsample.obj jchuff.obj \ + jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj +# decompression library object files +DLIBOBJECTS= jdapimin.obj jdapistd.obj jdarith.obj jdtrans.obj jdatasrc.obj \ + jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdmainct.obj \ + jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj jidctflt.obj \ + jidctint.obj jdsample.obj jdcolor.obj jquant1.obj jquant2.obj \ + jdmerge.obj +# These objectfiles are included in libjpeg.olb +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \ + rdswitch.obj cdjpeg.obj +DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \ + rdcolmap.obj cdjpeg.obj +TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj +# objectfile lists with commas --- what a crock +COBJLIST= cjpeg.obj,rdppm.obj,rdgif.obj,rdtarga.obj,rdrle.obj,rdbmp.obj,\ + rdswitch.obj,cdjpeg.obj +DOBJLIST= djpeg.obj,wrppm.obj,wrgif.obj,wrtarga.obj,wrrle.obj,wrbmp.obj,\ + rdcolmap.obj,cdjpeg.obj +TROBJLIST= jpegtran.obj,rdswitch.obj,cdjpeg.obj,transupp.obj +LIBOBJLIST= jaricom.obj,jcapimin.obj,jcapistd.obj,jcarith.obj,jctrans.obj,\ + jcparam.obj,jdatadst.obj,jcinit.obj,jcmaster.obj,jcmarker.obj,\ + jcmainct.obj,jcprepct.obj,jccoefct.obj,jccolor.obj,jcsample.obj,\ + jchuff.obj,jcdctmgr.obj,jfdctfst.obj,jfdctflt.obj,jfdctint.obj,\ + jdapimin.obj,jdapistd.obj,jdarith.obj,jdtrans.obj,jdatasrc.obj,\ + jdmaster.obj,jdinput.obj,jdmarker.obj,jdhuff.obj,jdmainct.obj,\ + jdcoefct.obj,jdpostct.obj,jddctmgr.obj,jidctfst.obj,jidctflt.obj,\ + jidctint.obj,jdsample.obj,jdcolor.obj,jquant1.obj,jquant2.obj,\ + jdmerge.obj,jcomapi.obj,jutils.obj,jerror.obj,jmemmgr.obj,$(SYSDEPMEM) + + +.first + @- Define /NoLog Sys Sys$Library + +ALL : libjpeg.olb cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe + @ Continue + +libjpeg.olb : $(LIBOBJECTS) + Library /Create libjpeg.olb $(LIBOBJLIST) + +cjpeg.exe : $(COBJECTS) libjpeg.olb + $(LINK) $(LFLAGS) /Executable = cjpeg.exe $(COBJLIST),libjpeg.olb/Library$(OPT) + +djpeg.exe : $(DOBJECTS) libjpeg.olb + $(LINK) $(LFLAGS) /Executable = djpeg.exe $(DOBJLIST),libjpeg.olb/Library$(OPT) + +jpegtran.exe : $(TROBJECTS) libjpeg.olb + $(LINK) $(LFLAGS) /Executable = jpegtran.exe $(TROBJLIST),libjpeg.olb/Library$(OPT) + +rdjpgcom.exe : rdjpgcom.obj + $(LINK) $(LFLAGS) /Executable = rdjpgcom.exe rdjpgcom.obj$(OPT) + +wrjpgcom.exe : wrjpgcom.obj + $(LINK) $(LFLAGS) /Executable = wrjpgcom.exe wrjpgcom.obj$(OPT) + +jconfig.h : jconfig.vms + @- Copy jconfig.vms jconfig.h + +clean : + @- Set Protection = Owner:RWED *.*;-1 + @- Set Protection = Owner:RWED *.OBJ + - Purge /NoLog /NoConfirm *.* + - Delete /NoLog /NoConfirm *.OBJ; + +test : cjpeg.exe djpeg.exe jpegtran.exe + mcr sys$disk:[]djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + mcr sys$disk:[]djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + mcr sys$disk:[]cjpeg -dct int -outfile testout.jpg testimg.ppm + mcr sys$disk:[]djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + mcr sys$disk:[]cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + mcr sys$disk:[]jpegtran -outfile testoutt.jpg testprog.jpg + - Backup /Compare/Log testimg.ppm testout.ppm + - Backup /Compare/Log testimg.bmp testout.bmp + - Backup /Compare/Log testimg.jpg testout.jpg + - Backup /Compare/Log testimg.ppm testoutp.ppm + - Backup /Compare/Log testimgp.jpg testoutp.jpg + - Backup /Compare/Log testorig.jpg testoutt.jpg + + +jaricom.obj : jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapimin.obj : jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapistd.obj : jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcarith.obj : jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccoefct.obj : jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccolor.obj : jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcdctmgr.obj : jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jchuff.obj : jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcinit.obj : jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmainct.obj : jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmarker.obj : jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmaster.obj : jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcomapi.obj : jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcparam.obj : jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcprepct.obj : jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcsample.obj : jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jctrans.obj : jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapimin.obj : jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapistd.obj : jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdarith.obj : jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdatadst.obj : jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdatasrc.obj : jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdcoefct.obj : jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdcolor.obj : jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jddctmgr.obj : jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jdhuff.obj : jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdinput.obj : jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmainct.obj : jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmarker.obj : jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmaster.obj : jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmerge.obj : jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdpostct.obj : jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdsample.obj : jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdtrans.obj : jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jerror.obj : jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h +jfdctflt.obj : jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctfst.obj : jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctint.obj : jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctflt.obj : jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctfst.obj : jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctint.obj : jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jquant1.obj : jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jquant2.obj : jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jutils.obj : jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jmemmgr.obj : jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemansi.obj : jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemname.obj : jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemnobs.obj : jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemdos.obj : jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemmac.obj : jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +cjpeg.obj : cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +djpeg.obj : djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +jpegtran.obj : jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h +rdjpgcom.obj : rdjpgcom.c jinclude.h jconfig.h +wrjpgcom.obj : wrjpgcom.c jinclude.h jconfig.h +cdjpeg.obj : cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdcolmap.obj : rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdswitch.obj : rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +transupp.obj : transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h +rdppm.obj : rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrppm.obj : wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdgif.obj : rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrgif.obj : wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdtarga.obj : rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrtarga.obj : wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdbmp.obj : rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrbmp.obj : wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdrle.obj : rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrrle.obj : wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/compat/libjpeg/makefile.sas b/compat/libjpeg/makefile.sas new file mode 100755 index 0000000..2dc8ec5 --- /dev/null +++ b/compat/libjpeg/makefile.sas @@ -0,0 +1,259 @@ +# Makefile for Independent JPEG Group's software + +# This makefile is for Amiga systems using SAS C 6.0 and up. +# Thanks to Ed Hanway, Mark Rinfret, and Jim Zepeda. + +# Read installation instructions before saying "make" !! + +# The name of your C compiler: +CC= sc + +# You may need to adjust these cc options: +# Uncomment the following lines for generic 680x0 version +ARCHFLAGS= cpu=any +SUFFIX= + +# Uncomment the following lines for 68030-only version +#ARCHFLAGS= cpu=68030 +#SUFFIX=.030 + +CFLAGS= nostackcheck data=near parms=register optimize $(ARCHFLAGS) \ + ignore=104 ignore=304 ignore=306 +# ignore=104 disables warnings for mismatched const qualifiers +# ignore=304 disables warnings for variables being optimized out +# ignore=306 disables warnings for the inlining of functions +# Generally, we recommend defining any configuration symbols in jconfig.h, +# NOT via define switches here. + +# Link-time cc options: +LDFLAGS= SC SD ND BATCH + +# To link any special libraries, add the necessary commands here. +LDLIBS= LIB:scm.lib LIB:sc.lib + +# Put here the object file name for the correct system-dependent memory +# manager file. For Amiga we recommend jmemname.o. +SYSDEPMEM= jmemname.o + +# miscellaneous OS-dependent stuff +# linker +LN= slink +# file deletion command +RM= delete quiet +# library (.lib) file creation command +AR= oml + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 \ + makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \ + makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 \ + makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 \ + makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 \ + makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 \ + makejsln.v10 makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 \ + makecfil.v10 makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 \ + makervcx.v10 makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac \ + makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st makefile.manx \ + makefile.sas makefile.mms makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \ + missing ar-lib +OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map +TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ + testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.o jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.o jcapistd.o jcarith.o jctrans.o jcparam.o \ + jdatadst.o jcinit.o jcmaster.o jcmarker.o jcmainct.o jcprepct.o \ + jccoefct.o jccolor.o jcsample.o jchuff.o jcdctmgr.o jfdctfst.o \ + jfdctflt.o jfdctint.o +# decompression library object files +DLIBOBJECTS= jdapimin.o jdapistd.o jdarith.o jdtrans.o jdatasrc.o \ + jdmaster.o jdinput.o jdmarker.o jdhuff.o jdmainct.o \ + jdcoefct.o jdpostct.o jddctmgr.o jidctfst.o jidctflt.o \ + jidctint.o jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o +# These objectfiles are included in libjpeg.lib +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \ + cdjpeg.o +DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \ + cdjpeg.o +TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o + + +all: libjpeg.lib cjpeg$(SUFFIX) djpeg$(SUFFIX) jpegtran$(SUFFIX) rdjpgcom$(SUFFIX) wrjpgcom$(SUFFIX) + +# note: do several AR steps to avoid command line length limitations + +libjpeg.lib: $(LIBOBJECTS) + -$(RM) libjpeg.lib + $(AR) libjpeg.lib r $(CLIBOBJECTS) + $(AR) libjpeg.lib r $(DLIBOBJECTS) + $(AR) libjpeg.lib r $(COMOBJECTS) + +cjpeg$(SUFFIX): $(COBJECTS) libjpeg.lib + $(LN) + +# You may want to adjust these compiler options: +CFLAGS= $(cflags) $(cdebug) $(cvars) -I. +# Generally, we recommend defining any configuration symbols in jconfig.h, +# NOT via -D switches here. + +# Link-time options: +LDFLAGS= $(ldebug) $(conlflags) + +# To link any special libraries, add the necessary commands here. +LDLIBS= $(conlibs) + +# Put here the object file name for the correct system-dependent memory +# manager file. For NT we suggest jmemnobs.obj, which expects the OS to +# provide adequate virtual memory. +SYSDEPMEM= jmemnobs.obj + +# miscellaneous OS-dependent stuff +# file deletion command +RM= del + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 \ + makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \ + makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 \ + makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 \ + makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 \ + makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 \ + makejsln.v10 makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 \ + makecfil.v10 makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 \ + makervcx.v10 makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac \ + makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st makefile.manx \ + makefile.sas makefile.mms makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \ + missing ar-lib +OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map +TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ + testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.obj jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.obj jcapistd.obj jcarith.obj jctrans.obj jcparam.obj \ + jdatadst.obj jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj \ + jcprepct.obj jccoefct.obj jccolor.obj jcsample.obj jchuff.obj \ + jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj +# decompression library object files +DLIBOBJECTS= jdapimin.obj jdapistd.obj jdarith.obj jdtrans.obj jdatasrc.obj \ + jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdmainct.obj \ + jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj jidctflt.obj \ + jidctint.obj jdsample.obj jdcolor.obj jquant1.obj jquant2.obj \ + jdmerge.obj +# These objectfiles are included in libjpeg.lib +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \ + rdswitch.obj cdjpeg.obj +DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \ + rdcolmap.obj cdjpeg.obj +TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj + +# Template command for compiling .c to .obj +.c.obj: + $(cc) $(CFLAGS) $*.c + + +all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe + +libjpeg.lib: $(LIBOBJECTS) + $(RM) libjpeg.lib + lib -out:libjpeg.lib $(LIBOBJECTS) + +cjpeg.exe: $(COBJECTS) libjpeg.lib + $(link) $(LDFLAGS) -out:cjpeg.exe $(COBJECTS) libjpeg.lib $(LDLIBS) + +djpeg.exe: $(DOBJECTS) libjpeg.lib + $(link) $(LDFLAGS) -out:djpeg.exe $(DOBJECTS) libjpeg.lib $(LDLIBS) + +jpegtran.exe: $(TROBJECTS) libjpeg.lib + $(link) $(LDFLAGS) -out:jpegtran.exe $(TROBJECTS) libjpeg.lib $(LDLIBS) + +rdjpgcom.exe: rdjpgcom.obj + $(link) $(LDFLAGS) -out:rdjpgcom.exe rdjpgcom.obj $(LDLIBS) + +wrjpgcom.exe: wrjpgcom.obj + $(link) $(LDFLAGS) -out:wrjpgcom.exe wrjpgcom.obj $(LDLIBS) + + +clean: + $(RM) *.obj *.exe libjpeg.lib + $(RM) testout* + +setup-vc6: + ren jconfig.vc jconfig.h + ren makejdsw.vc6 jpeg.dsw + ren makeadsw.vc6 apps.dsw + ren makejmak.vc6 jpeg.mak + ren makejdep.vc6 jpeg.dep + ren makejdsp.vc6 jpeg.dsp + ren makecmak.vc6 cjpeg.mak + ren makecdep.vc6 cjpeg.dep + ren makecdsp.vc6 cjpeg.dsp + ren makedmak.vc6 djpeg.mak + ren makeddep.vc6 djpeg.dep + ren makeddsp.vc6 djpeg.dsp + ren maketmak.vc6 jpegtran.mak + ren maketdep.vc6 jpegtran.dep + ren maketdsp.vc6 jpegtran.dsp + ren makermak.vc6 rdjpgcom.mak + ren makerdep.vc6 rdjpgcom.dep + ren makerdsp.vc6 rdjpgcom.dsp + ren makewmak.vc6 wrjpgcom.mak + ren makewdep.vc6 wrjpgcom.dep + ren makewdsp.vc6 wrjpgcom.dsp + +setup-v10: + ren jconfig.vc jconfig.h + ren makejsln.v10 jpeg.sln + ren makeasln.v10 apps.sln + ren makejvcx.v10 jpeg.vcxproj + ren makejfil.v10 jpeg.vcxproj.filters + ren makecvcx.v10 cjpeg.vcxproj + ren makecfil.v10 cjpeg.vcxproj.filters + ren makedvcx.v10 djpeg.vcxproj + ren makedfil.v10 djpeg.vcxproj.filters + ren maketvcx.v10 jpegtran.vcxproj + ren maketfil.v10 jpegtran.vcxproj.filters + ren makervcx.v10 rdjpgcom.vcxproj + ren makerfil.v10 rdjpgcom.vcxproj.filters + ren makewvcx.v10 wrjpgcom.vcxproj + ren makewfil.v10 wrjpgcom.vcxproj.filters + +test: + IF EXIST testout* $(RM) testout* + .\djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + .\djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + .\cjpeg -dct int -outfile testout.jpg testimg.ppm + .\djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + .\cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + .\jpegtran -outfile testoutt.jpg testprog.jpg + fc /b testimg.ppm testout.ppm + fc /b testimg.bmp testout.bmp + fc /b testimg.jpg testout.jpg + fc /b testimg.ppm testoutp.ppm + fc /b testimgp.jpg testoutp.jpg + fc /b testorig.jpg testoutt.jpg + +test-build: + IF EXIST testout* $(RM) testout* + .\djpeg\Release\djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + .\djpeg\Release\djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + .\cjpeg\Release\cjpeg -dct int -outfile testout.jpg testimg.ppm + .\djpeg\Release\djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + .\cjpeg\Release\cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + .\jpegtran\Release\jpegtran -outfile testoutt.jpg testprog.jpg + fc /b testimg.ppm testout.ppm + fc /b testimg.bmp testout.bmp + fc /b testimg.jpg testout.jpg + fc /b testimg.ppm testoutp.ppm + fc /b testimgp.jpg testoutp.jpg + fc /b testorig.jpg testoutt.jpg + + +jaricom.obj: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcarith.obj: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdarith.obj: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h +jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h +rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h +wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h +cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h +rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/compat/libjpeg/makefile.vms b/compat/libjpeg/makefile.vms new file mode 100755 index 0000000..5d89ff2 --- /dev/null +++ b/compat/libjpeg/makefile.vms @@ -0,0 +1,142 @@ +$! Makefile for Independent JPEG Group's software +$! +$! This is a command procedure for Digital VMS systems that do not have MMS. +$! It builds the JPEG software by brute force, recompiling everything whether +$! or not it is necessary. It then runs the basic self-test. +$! Thanks to Rick Dyson (dyson@iowasp.physics.uiowa.edu) +$! and Tim Bell (tbell@netcom.com) for their help. +$! +$! Read installation instructions before running this!! +$! +$ If F$Mode () .eqs. "INTERACTIVE" +$ Then +$ VERIFY = F$Verify (0) +$ Else +$ VERIFY = F$Verify (1) +$ EndIf +$ On Control_Y Then GoTo End +$ On Error Then GoTo End +$ +$ If F$GetSyi ("HW_MODEL") .gt. 1023 +$ Then +$ OPT = "" +$ Else +$ OPT = ",Sys$Disk:[]makvms.opt/Option" +$ EndIf +$ +$ DoCompile := CC /NoDebug /Optimize /NoList +$! +$ DoCompile jaricom.c +$ DoCompile jcapimin.c +$ DoCompile jcapistd.c +$ DoCompile jcarith.c +$ DoCompile jctrans.c +$ DoCompile jcparam.c +$ DoCompile jdatadst.c +$ DoCompile jcinit.c +$ DoCompile jcmaster.c +$ DoCompile jcmarker.c +$ DoCompile jcmainct.c +$ DoCompile jcprepct.c +$ DoCompile jccoefct.c +$ DoCompile jccolor.c +$ DoCompile jcsample.c +$ DoCompile jchuff.c +$ DoCompile jcdctmgr.c +$ DoCompile jfdctfst.c +$ DoCompile jfdctflt.c +$ DoCompile jfdctint.c +$ DoCompile jdapimin.c +$ DoCompile jdapistd.c +$ DoCompile jdarith.c +$ DoCompile jdtrans.c +$ DoCompile jdatasrc.c +$ DoCompile jdmaster.c +$ DoCompile jdinput.c +$ DoCompile jdmarker.c +$ DoCompile jdhuff.c +$ DoCompile jdmainct.c +$ DoCompile jdcoefct.c +$ DoCompile jdpostct.c +$ DoCompile jddctmgr.c +$ DoCompile jidctfst.c +$ DoCompile jidctflt.c +$ DoCompile jidctint.c +$ DoCompile jdsample.c +$ DoCompile jdcolor.c +$ DoCompile jquant1.c +$ DoCompile jquant2.c +$ DoCompile jdmerge.c +$ DoCompile jcomapi.c +$ DoCompile jutils.c +$ DoCompile jerror.c +$ DoCompile jmemmgr.c +$ DoCompile jmemnobs.c +$! +$ Library /Create libjpeg.olb jaricom.obj,jcapimin.obj,jcapistd.obj, - + jcarith.obj,jctrans.obj,jcparam.obj,jdatadst.obj,jcinit.obj, - + jcmaster.obj,jcmarker.obj,jcmainct.obj,jcprepct.obj,jccoefct.obj, - + jccolor.obj,jcsample.obj,jchuff.obj,jcdctmgr.obj,jfdctfst.obj, - + jfdctflt.obj,jfdctint.obj,jdapimin.obj,jdapistd.obj,jdarith.obj, - + jdtrans.obj,jdatasrc.obj,jdmaster.obj,jdinput.obj,jdmarker.obj, - + jdhuff.obj,jdmainct.obj,jdcoefct.obj,jdpostct.obj,jddctmgr.obj, - + jidctfst.obj,jidctflt.obj,jidctint.obj,jdsample.obj,jdcolor.obj, - + jquant1.obj,jquant2.obj,jdmerge.obj,jcomapi.obj,jutils.obj, - + jerror.obj,jmemmgr.obj,jmemnobs.obj +$! +$ DoCompile cjpeg.c +$ DoCompile rdppm.c +$ DoCompile rdgif.c +$ DoCompile rdtarga.c +$ DoCompile rdrle.c +$ DoCompile rdbmp.c +$ DoCompile rdswitch.c +$ DoCompile cdjpeg.c +$! +$ Link /NoMap /Executable = cjpeg.exe cjpeg.obj,rdppm.obj,rdgif.obj, - + rdtarga.obj,rdrle.obj,rdbmp.obj,rdswitch.obj,cdjpeg.obj,libjpeg.olb/Library'OPT' +$! +$ DoCompile djpeg.c +$ DoCompile wrppm.c +$ DoCompile wrgif.c +$ DoCompile wrtarga.c +$ DoCompile wrrle.c +$ DoCompile wrbmp.c +$ DoCompile rdcolmap.c +$ DoCompile cdjpeg.c +$! +$ Link /NoMap /Executable = djpeg.exe djpeg.obj,wrppm.obj,wrgif.obj, - + wrtarga.obj,wrrle.obj,wrbmp.obj,rdcolmap.obj,cdjpeg.obj,libjpeg.olb/Library'OPT' +$! +$ DoCompile jpegtran.c +$ DoCompile rdswitch.c +$ DoCompile cdjpeg.c +$ DoCompile transupp.c +$! +$ Link /NoMap /Executable = jpegtran.exe jpegtran.obj,rdswitch.obj, - + cdjpeg.obj,transupp.obj,libjpeg.olb/Library'OPT' +$! +$ DoCompile rdjpgcom.c +$ Link /NoMap /Executable = rdjpgcom.exe rdjpgcom.obj'OPT' +$! +$ DoCompile wrjpgcom.c +$ Link /NoMap /Executable = wrjpgcom.exe wrjpgcom.obj'OPT' +$! +$! Run the self-test +$! +$ mcr sys$disk:[]djpeg -dct int -ppm -outfile testout.ppm testorig.jpg +$ mcr sys$disk:[]djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg +$ mcr sys$disk:[]cjpeg -dct int -outfile testout.jpg testimg.ppm +$ mcr sys$disk:[]djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg +$ mcr sys$disk:[]cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm +$ mcr sys$disk:[]jpegtran -outfile testoutt.jpg testprog.jpg +$ Backup /Compare/Log testimg.ppm testout.ppm +$ Backup /Compare/Log testimg.bmp testout.bmp +$ Backup /Compare/Log testimg.jpg testout.jpg +$ Backup /Compare/Log testimg.ppm testoutp.ppm +$ Backup /Compare/Log testimgp.jpg testoutp.jpg +$ Backup /Compare/Log testorig.jpg testoutt.jpg +$! +$End: +$ If Verify Then Set Verify +$ Exit diff --git a/compat/libjpeg/makefile.wat b/compat/libjpeg/makefile.wat new file mode 100755 index 0000000..f37b1aa --- /dev/null +++ b/compat/libjpeg/makefile.wat @@ -0,0 +1,240 @@ +# Makefile for Independent JPEG Group's software + +# This makefile is suitable for Watcom C/C++ 10.0 on MS-DOS (using +# dos4g extender), OS/2, and Windows NT console mode. +# Thanks to Janos Haide, jhaide@btrvtech.com. + +# Read installation instructions before saying "wmake" !! + +# Uncomment line for desired system +SYSTEM=DOS +#SYSTEM=OS2 +#SYSTEM=NT + +# The name of your C compiler: +CC= wcl386 + +# You may need to adjust these cc options: +CFLAGS= -4r -ort -wx -zq -bt=$(SYSTEM) +# Caution: avoid -ol or -ox; these generate bad code with 10.0 or 10.0a. +# Generally, we recommend defining any configuration symbols in jconfig.h, +# NOT via -D switches here. + +# Link-time cc options: +!ifeq SYSTEM DOS +LDFLAGS= -zq -l=dos4g +!else ifeq SYSTEM OS2 +LDFLAGS= -zq -l=os2v2 +!else ifeq SYSTEM NT +LDFLAGS= -zq -l=nt +!endif + +# Put here the object file name for the correct system-dependent memory +# manager file. jmemnobs should work fine for dos4g or OS/2 environment. +SYSDEPMEM= jmemnobs.obj + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c & + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c & + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c & + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c & + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c & + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c & + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c & + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c & + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c & + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h & + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 & + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt & + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 & + makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc & + makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 & + makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 & + makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 & + makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 & + makejsln.v10 makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 & + makecfil.v10 makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 & + makervcx.v10 makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac & + makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st makefile.manx & + makefile.sas makefile.mms makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat & + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas & + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp & + missing ar-lib +OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map +TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg & + testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) & + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.obj jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.obj jcapistd.obj jcarith.obj jctrans.obj jcparam.obj & + jdatadst.obj jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj & + jcprepct.obj jccoefct.obj jccolor.obj jcsample.obj jchuff.obj & + jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj +# decompression library object files +DLIBOBJECTS= jdapimin.obj jdapistd.obj jdarith.obj jdtrans.obj jdatasrc.obj & + jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdmainct.obj & + jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj jidctflt.obj & + jidctint.obj jdsample.obj jdcolor.obj jquant1.obj jquant2.obj & + jdmerge.obj +# These objectfiles are included in libjpeg.lib +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj & + rdswitch.obj cdjpeg.obj +DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj & + rdcolmap.obj cdjpeg.obj +TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj + + +all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe + +libjpeg.lib: $(LIBOBJECTS) + - del libjpeg.lib + * wlib -n libjpeg.lib $(LIBOBJECTS) + +cjpeg.exe: $(COBJECTS) libjpeg.lib + $(CC) $(LDFLAGS) $(COBJECTS) libjpeg.lib + +djpeg.exe: $(DOBJECTS) libjpeg.lib + $(CC) $(LDFLAGS) $(DOBJECTS) libjpeg.lib + +jpegtran.exe: $(TROBJECTS) libjpeg.lib + $(CC) $(LDFLAGS) $(TROBJECTS) libjpeg.lib + +rdjpgcom.exe: rdjpgcom.c + $(CC) $(CFLAGS) $(LDFLAGS) rdjpgcom.c + +wrjpgcom.exe: wrjpgcom.c + $(CC) $(CFLAGS) $(LDFLAGS) wrjpgcom.c + +.c.obj: + $(CC) $(CFLAGS) -c $< + +jconfig.h: jconfig.txt + echo You must prepare a system-dependent jconfig.h file. + echo Please read the installation directions in install.txt. + exit 1 + +clean: .SYMBOLIC + - del *.obj + - del libjpeg.lib + - del cjpeg.exe + - del djpeg.exe + - del jpegtran.exe + - del rdjpgcom.exe + - del wrjpgcom.exe + - del testout*.* + +test: cjpeg.exe djpeg.exe jpegtran.exe .SYMBOLIC + - del testout*.* + djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + cjpeg -dct int -outfile testout.jpg testimg.ppm + djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + jpegtran -outfile testoutt.jpg testprog.jpg +!ifeq SYSTEM DOS + fc /b testimg.ppm testout.ppm + fc /b testimg.bmp testout.bmp + fc /b testimg.jpg testout.jpg + fc /b testimg.ppm testoutp.ppm + fc /b testimgp.jpg testoutp.jpg + fc /b testorig.jpg testoutt.jpg +!else + echo n > n.tmp + comp testimg.ppm testout.ppm < n.tmp + comp testimg.bmp testout.bmp < n.tmp + comp testimg.jpg testout.jpg < n.tmp + comp testimg.ppm testoutp.ppm < n.tmp + comp testimgp.jpg testoutp.jpg < n.tmp + comp testorig.jpg testoutt.jpg < n.tmp + del n.tmp +!endif + + +jaricom.obj: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcarith.obj: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdarith.obj: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h +jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h +rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h +wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h +cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h +rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/compat/libjpeg/makejdep.vc6 b/compat/libjpeg/makejdep.vc6 new file mode 100755 index 0000000..1065b21 --- /dev/null +++ b/compat/libjpeg/makejdep.vc6 @@ -0,0 +1,423 @@ +# Microsoft Developer Studio erstellte Abh„ngigkeitsdatei, einbezogen von jpeg.mak + +.\jaricom.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcapimin.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcapistd.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcarith.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jccoefct.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jccolor.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcdctmgr.c : \ + ".\jconfig.h"\ + ".\jdct.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jchuff.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcinit.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcmainct.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcmarker.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcmaster.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcomapi.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcparam.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcprepct.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcsample.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jctrans.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdapimin.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdapistd.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdarith.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdatadst.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\jdatasrc.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\jdcoefct.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdcolor.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jddctmgr.c : \ + ".\jconfig.h"\ + ".\jdct.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdhuff.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdinput.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdmainct.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdmarker.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdmaster.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdmerge.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdpostct.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdsample.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdtrans.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jerror.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + ".\jversion.h"\ + + +.\jfdctflt.c : \ + ".\jconfig.h"\ + ".\jdct.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jfdctfst.c : \ + ".\jconfig.h"\ + ".\jdct.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jfdctint.c : \ + ".\jconfig.h"\ + ".\jdct.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jidctflt.c : \ + ".\jconfig.h"\ + ".\jdct.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jidctfst.c : \ + ".\jconfig.h"\ + ".\jdct.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jidctint.c : \ + ".\jconfig.h"\ + ".\jdct.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jmemmgr.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmemsys.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jmemnobs.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmemsys.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jquant1.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jquant2.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jutils.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + diff --git a/compat/libjpeg/makejdsp.vc6 b/compat/libjpeg/makejdsp.vc6 new file mode 100755 index 0000000..738f1ab --- /dev/null +++ b/compat/libjpeg/makejdsp.vc6 @@ -0,0 +1,285 @@ +# Microsoft Developer Studio Project File - Name="jpeg" - Package Owner=<4> +# Microsoft Developer Studio Generated Build File, Format Version 6.00 +# ** NICHT BEARBEITEN ** + +# TARGTYPE "Win32 (x86) Static Library" 0x0104 + +CFG=jpeg - Win32 +!MESSAGE Dies ist kein gltiges Makefile. Zum Erstellen dieses Projekts mit NMAKE +!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und fhren Sie den Befehl +!MESSAGE +!MESSAGE NMAKE /f "jpeg.mak". +!MESSAGE +!MESSAGE Sie k÷nnen beim Ausfhren von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "jpeg.mak" CFG="jpeg - Win32" +!MESSAGE +!MESSAGE Fr die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "jpeg - Win32" (basierend auf "Win32 (x86) Static Library") +!MESSAGE + +# Begin Project +# PROP AllowPerConfigDependencies 0 +# PROP Scc_ProjName "" +# PROP Scc_LocalPath "" +CPP=cl.exe +RSC=rc.exe +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir ".\Release" +# PROP BASE Intermediate_Dir ".\Release" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir ".\Release" +# PROP Intermediate_Dir ".\Release" +# PROP Target_Dir "" +# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /c +# ADD CPP /nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /FD /c +# ADD BASE RSC /l 0x407 +# ADD RSC /l 0x407 +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LIB32=link.exe -lib +# ADD BASE LIB32 /nologo +# ADD LIB32 /nologo +# Begin Target + +# Name "jpeg - Win32" +# Begin Group "Quellcodedateien" + +# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat;for;f90" +# Begin Source File + +SOURCE=.\jaricom.c +# End Source File +# Begin Source File + +SOURCE=.\jcapimin.c +# End Source File +# Begin Source File + +SOURCE=.\jcapistd.c +# End Source File +# Begin Source File + +SOURCE=.\jcarith.c +# End Source File +# Begin Source File + +SOURCE=.\jccoefct.c +# End Source File +# Begin Source File + +SOURCE=.\jccolor.c +# End Source File +# Begin Source File + +SOURCE=.\jcdctmgr.c +# End Source File +# Begin Source File + +SOURCE=.\jchuff.c +# End Source File +# Begin Source File + +SOURCE=.\jcinit.c +# End Source File +# Begin Source File + +SOURCE=.\jcmainct.c +# End Source File +# Begin Source File + +SOURCE=.\jcmarker.c +# End Source File +# Begin Source File + +SOURCE=.\jcmaster.c +# End Source File +# Begin Source File + +SOURCE=.\jcomapi.c +# End Source File +# Begin Source File + +SOURCE=.\jcparam.c +# End Source File +# Begin Source File + +SOURCE=.\jcprepct.c +# End Source File +# Begin Source File + +SOURCE=.\jcsample.c +# End Source File +# Begin Source File + +SOURCE=.\jctrans.c +# End Source File +# Begin Source File + +SOURCE=.\jdapimin.c +# End Source File +# Begin Source File + +SOURCE=.\jdapistd.c +# End Source File +# Begin Source File + +SOURCE=.\jdarith.c +# End Source File +# Begin Source File + +SOURCE=.\jdatadst.c +# End Source File +# Begin Source File + +SOURCE=.\jdatasrc.c +# End Source File +# Begin Source File + +SOURCE=.\jdcoefct.c +# End Source File +# Begin Source File + +SOURCE=.\jdcolor.c +# End Source File +# Begin Source File + +SOURCE=.\jddctmgr.c +# End Source File +# Begin Source File + +SOURCE=.\jdhuff.c +# End Source File +# Begin Source File + +SOURCE=.\jdinput.c +# End Source File +# Begin Source File + +SOURCE=.\jdmainct.c +# End Source File +# Begin Source File + +SOURCE=.\jdmarker.c +# End Source File +# Begin Source File + +SOURCE=.\jdmaster.c +# End Source File +# Begin Source File + +SOURCE=.\jdmerge.c +# End Source File +# Begin Source File + +SOURCE=.\jdpostct.c +# End Source File +# Begin Source File + +SOURCE=.\jdsample.c +# End Source File +# Begin Source File + +SOURCE=.\jdtrans.c +# End Source File +# Begin Source File + +SOURCE=.\jerror.c +# End Source File +# Begin Source File + +SOURCE=.\jfdctflt.c +# End Source File +# Begin Source File + +SOURCE=.\jfdctfst.c +# End Source File +# Begin Source File + +SOURCE=.\jfdctint.c +# End Source File +# Begin Source File + +SOURCE=.\jidctflt.c +# End Source File +# Begin Source File + +SOURCE=.\jidctfst.c +# End Source File +# Begin Source File + +SOURCE=.\jidctint.c +# End Source File +# Begin Source File + +SOURCE=.\jmemmgr.c +# End Source File +# Begin Source File + +SOURCE=.\jmemnobs.c +# End Source File +# Begin Source File + +SOURCE=.\jquant1.c +# End Source File +# Begin Source File + +SOURCE=.\jquant2.c +# End Source File +# Begin Source File + +SOURCE=.\jutils.c +# End Source File +# End Group +# Begin Group "Header-Dateien" + +# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd" +# Begin Source File + +SOURCE=.\jconfig.h +# End Source File +# Begin Source File + +SOURCE=.\jdct.h +# End Source File +# Begin Source File + +SOURCE=.\jerror.h +# End Source File +# Begin Source File + +SOURCE=.\jinclude.h +# End Source File +# Begin Source File + +SOURCE=.\jmemsys.h +# End Source File +# Begin Source File + +SOURCE=.\jmorecfg.h +# End Source File +# Begin Source File + +SOURCE=.\jpegint.h +# End Source File +# Begin Source File + +SOURCE=.\jpeglib.h +# End Source File +# Begin Source File + +SOURCE=.\jversion.h +# End Source File +# End Group +# Begin Group "Ressourcendateien" + +# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe" +# End Group +# End Target +# End Project diff --git a/compat/libjpeg/makejdsw.vc6 b/compat/libjpeg/makejdsw.vc6 new file mode 100755 index 0000000..d11fab1 --- /dev/null +++ b/compat/libjpeg/makejdsw.vc6 @@ -0,0 +1,29 @@ +Microsoft Developer Studio Workspace File, Format Version 6.00 +# WARNUNG: DIESE ARBEITSBEREICHSDATEI DARF NICHT BEARBEITET ODER GEL™SCHT WERDEN! + +############################################################################### + +Project: "jpeg"=".\jpeg.dsp" - Package Owner=<4> + +Package=<5> +{{{ +}}} + +Package=<4> +{{{ +}}} + +############################################################################### + +Global: + +Package=<5> +{{{ +}}} + +Package=<3> +{{{ +}}} + +############################################################################### + diff --git a/compat/libjpeg/makejfil.v10 b/compat/libjpeg/makejfil.v10 new file mode 100755 index 0000000..654bfc0 --- /dev/null +++ b/compat/libjpeg/makejfil.v10 @@ -0,0 +1,186 @@ +‹¯¨ + + + + {4FC737F1-C7A5-4376-A066-2A32D752A2FF} + cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx + + + {93995380-89BD-4b04-88EB-625FBE52EBFB} + h;hpp;hxx;hm;inl;inc;xsd + + + {67DA6AB6-F800-4c08-8B7A-83BB121AAD01} + rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms + + + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + \ No newline at end of file diff --git a/compat/libjpeg/makejmak.vc6 b/compat/libjpeg/makejmak.vc6 new file mode 100755 index 0000000..1107336 --- /dev/null +++ b/compat/libjpeg/makejmak.vc6 @@ -0,0 +1,425 @@ +# Microsoft Developer Studio Generated NMAKE File, Based on jpeg.dsp +!IF "$(CFG)" == "" +CFG=jpeg - Win32 +!MESSAGE Keine Konfiguration angegeben. jpeg - Win32 wird als Standard verwendet. +!ENDIF + +!IF "$(CFG)" != "jpeg - Win32" +!MESSAGE Ungültige Konfiguration "$(CFG)" angegeben. +!MESSAGE Sie können beim Ausführen von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "jpeg.mak" CFG="jpeg - Win32" +!MESSAGE +!MESSAGE Für die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "jpeg - Win32" (basierend auf "Win32 (x86) Static Library") +!MESSAGE +!ERROR Eine ungültige Konfiguration wurde angegeben. +!ENDIF + +!IF "$(OS)" == "Windows_NT" +NULL= +!ELSE +NULL=nul +!ENDIF + +OUTDIR=.\Release +INTDIR=.\Release +# Begin Custom Macros +OutDir=.\Release +# End Custom Macros + +ALL : "$(OUTDIR)\jpeg.lib" + + +CLEAN : + -@erase "$(INTDIR)\jaricom.obj" + -@erase "$(INTDIR)\jcapimin.obj" + -@erase "$(INTDIR)\jcapistd.obj" + -@erase "$(INTDIR)\jcarith.obj" + -@erase "$(INTDIR)\jccoefct.obj" + -@erase "$(INTDIR)\jccolor.obj" + -@erase "$(INTDIR)\jcdctmgr.obj" + -@erase "$(INTDIR)\jchuff.obj" + -@erase "$(INTDIR)\jcinit.obj" + -@erase "$(INTDIR)\jcmainct.obj" + -@erase "$(INTDIR)\jcmarker.obj" + -@erase "$(INTDIR)\jcmaster.obj" + -@erase "$(INTDIR)\jcomapi.obj" + -@erase "$(INTDIR)\jcparam.obj" + -@erase "$(INTDIR)\jcprepct.obj" + -@erase "$(INTDIR)\jcsample.obj" + -@erase "$(INTDIR)\jctrans.obj" + -@erase "$(INTDIR)\jdapimin.obj" + -@erase "$(INTDIR)\jdapistd.obj" + -@erase "$(INTDIR)\jdarith.obj" + -@erase "$(INTDIR)\jdatadst.obj" + -@erase "$(INTDIR)\jdatasrc.obj" + -@erase "$(INTDIR)\jdcoefct.obj" + -@erase "$(INTDIR)\jdcolor.obj" + -@erase "$(INTDIR)\jddctmgr.obj" + -@erase "$(INTDIR)\jdhuff.obj" + -@erase "$(INTDIR)\jdinput.obj" + -@erase "$(INTDIR)\jdmainct.obj" + -@erase "$(INTDIR)\jdmarker.obj" + -@erase "$(INTDIR)\jdmaster.obj" + -@erase "$(INTDIR)\jdmerge.obj" + -@erase "$(INTDIR)\jdpostct.obj" + -@erase "$(INTDIR)\jdsample.obj" + -@erase "$(INTDIR)\jdtrans.obj" + -@erase "$(INTDIR)\jerror.obj" + -@erase "$(INTDIR)\jfdctflt.obj" + -@erase "$(INTDIR)\jfdctfst.obj" + -@erase "$(INTDIR)\jfdctint.obj" + -@erase "$(INTDIR)\jidctflt.obj" + -@erase "$(INTDIR)\jidctfst.obj" + -@erase "$(INTDIR)\jidctint.obj" + -@erase "$(INTDIR)\jmemmgr.obj" + -@erase "$(INTDIR)\jmemnobs.obj" + -@erase "$(INTDIR)\jquant1.obj" + -@erase "$(INTDIR)\jquant2.obj" + -@erase "$(INTDIR)\jutils.obj" + -@erase "$(INTDIR)\vc60.idb" + -@erase "$(OUTDIR)\jpeg.lib" + +"$(OUTDIR)" : + if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" + +CPP=cl.exe +CPP_PROJ=/nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /Fp"$(INTDIR)\jpeg.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c + +.c{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.c{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +RSC=rc.exe +BSC32=bscmake.exe +BSC32_FLAGS=/nologo /o"$(OUTDIR)\jpeg.bsc" +BSC32_SBRS= \ + +LIB32=link.exe -lib +LIB32_FLAGS=/nologo /out:"$(OUTDIR)\jpeg.lib" +LIB32_OBJS= \ + "$(INTDIR)\jaricom.obj" \ + "$(INTDIR)\jcapimin.obj" \ + "$(INTDIR)\jcapistd.obj" \ + "$(INTDIR)\jcarith.obj" \ + "$(INTDIR)\jccoefct.obj" \ + "$(INTDIR)\jccolor.obj" \ + "$(INTDIR)\jcdctmgr.obj" \ + "$(INTDIR)\jchuff.obj" \ + "$(INTDIR)\jcinit.obj" \ + "$(INTDIR)\jcmainct.obj" \ + "$(INTDIR)\jcmarker.obj" \ + "$(INTDIR)\jcmaster.obj" \ + "$(INTDIR)\jcomapi.obj" \ + "$(INTDIR)\jcparam.obj" \ + "$(INTDIR)\jcprepct.obj" \ + "$(INTDIR)\jcsample.obj" \ + "$(INTDIR)\jctrans.obj" \ + "$(INTDIR)\jdapimin.obj" \ + "$(INTDIR)\jdapistd.obj" \ + "$(INTDIR)\jdarith.obj" \ + "$(INTDIR)\jdatadst.obj" \ + "$(INTDIR)\jdatasrc.obj" \ + "$(INTDIR)\jdcoefct.obj" \ + "$(INTDIR)\jdcolor.obj" \ + "$(INTDIR)\jddctmgr.obj" \ + "$(INTDIR)\jdhuff.obj" \ + "$(INTDIR)\jdinput.obj" \ + "$(INTDIR)\jdmainct.obj" \ + "$(INTDIR)\jdmarker.obj" \ + "$(INTDIR)\jdmaster.obj" \ + "$(INTDIR)\jdmerge.obj" \ + "$(INTDIR)\jdpostct.obj" \ + "$(INTDIR)\jdsample.obj" \ + "$(INTDIR)\jdtrans.obj" \ + "$(INTDIR)\jerror.obj" \ + "$(INTDIR)\jfdctflt.obj" \ + "$(INTDIR)\jfdctfst.obj" \ + "$(INTDIR)\jfdctint.obj" \ + "$(INTDIR)\jidctflt.obj" \ + "$(INTDIR)\jidctfst.obj" \ + "$(INTDIR)\jidctint.obj" \ + "$(INTDIR)\jmemmgr.obj" \ + "$(INTDIR)\jmemnobs.obj" \ + "$(INTDIR)\jquant1.obj" \ + "$(INTDIR)\jquant2.obj" \ + "$(INTDIR)\jutils.obj" + +"$(OUTDIR)\jpeg.lib" : "$(OUTDIR)" $(DEF_FILE) $(LIB32_OBJS) + $(LIB32) @<< + $(LIB32_FLAGS) $(DEF_FLAGS) $(LIB32_OBJS) +<< + + +!IF "$(NO_EXTERNAL_DEPS)" != "1" +!IF EXISTS("jpeg.dep") +!INCLUDE "jpeg.dep" +!ELSE +!MESSAGE Warning: cannot find "jpeg.dep" +!ENDIF +!ENDIF + + +!IF "$(CFG)" == "jpeg - Win32" +SOURCE=.\jaricom.c + +"$(INTDIR)\jaricom.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcapimin.c + +"$(INTDIR)\jcapimin.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcapistd.c + +"$(INTDIR)\jcapistd.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcarith.c + +"$(INTDIR)\jcarith.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jccoefct.c + +"$(INTDIR)\jccoefct.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jccolor.c + +"$(INTDIR)\jccolor.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcdctmgr.c + +"$(INTDIR)\jcdctmgr.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jchuff.c + +"$(INTDIR)\jchuff.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcinit.c + +"$(INTDIR)\jcinit.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcmainct.c + +"$(INTDIR)\jcmainct.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcmarker.c + +"$(INTDIR)\jcmarker.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcmaster.c + +"$(INTDIR)\jcmaster.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcomapi.c + +"$(INTDIR)\jcomapi.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcparam.c + +"$(INTDIR)\jcparam.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcprepct.c + +"$(INTDIR)\jcprepct.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcsample.c + +"$(INTDIR)\jcsample.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jctrans.c + +"$(INTDIR)\jctrans.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdapimin.c + +"$(INTDIR)\jdapimin.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdapistd.c + +"$(INTDIR)\jdapistd.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdarith.c + +"$(INTDIR)\jdarith.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdatadst.c + +"$(INTDIR)\jdatadst.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdatasrc.c + +"$(INTDIR)\jdatasrc.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdcoefct.c + +"$(INTDIR)\jdcoefct.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdcolor.c + +"$(INTDIR)\jdcolor.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jddctmgr.c + +"$(INTDIR)\jddctmgr.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdhuff.c + +"$(INTDIR)\jdhuff.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdinput.c + +"$(INTDIR)\jdinput.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdmainct.c + +"$(INTDIR)\jdmainct.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdmarker.c + +"$(INTDIR)\jdmarker.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdmaster.c + +"$(INTDIR)\jdmaster.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdmerge.c + +"$(INTDIR)\jdmerge.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdpostct.c + +"$(INTDIR)\jdpostct.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdsample.c + +"$(INTDIR)\jdsample.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdtrans.c + +"$(INTDIR)\jdtrans.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jerror.c + +"$(INTDIR)\jerror.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jfdctflt.c + +"$(INTDIR)\jfdctflt.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jfdctfst.c + +"$(INTDIR)\jfdctfst.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jfdctint.c + +"$(INTDIR)\jfdctint.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jidctflt.c + +"$(INTDIR)\jidctflt.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jidctfst.c + +"$(INTDIR)\jidctfst.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jidctint.c + +"$(INTDIR)\jidctint.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jmemmgr.c + +"$(INTDIR)\jmemmgr.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jmemnobs.c + +"$(INTDIR)\jmemnobs.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jquant1.c + +"$(INTDIR)\jquant1.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jquant2.c + +"$(INTDIR)\jquant2.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jutils.c + +"$(INTDIR)\jutils.obj" : $(SOURCE) "$(INTDIR)" + + + +!ENDIF + diff --git a/compat/libjpeg/makejsln.v10 b/compat/libjpeg/makejsln.v10 new file mode 100755 index 0000000..6a5befd --- /dev/null +++ b/compat/libjpeg/makejsln.v10 @@ -0,0 +1,17 @@ +‹¯¨ +Microsoft Visual Studio Solution File, Format Version 11.00 +# Visual C++ Express 2010 +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "jpeg", "jpeg.vcxproj", "{019DBD2A-273D-4BA4-BF86-B5EFE2ED76B1}" +EndProject +Global + GlobalSection(SolutionConfigurationPlatforms) = preSolution + Release|Win32 = Release|Win32 + EndGlobalSection + GlobalSection(ProjectConfigurationPlatforms) = postSolution + {019DBD2A-273D-4BA4-BF86-B5EFE2ED76B1}.Release|Win32.ActiveCfg = Release|Win32 + {019DBD2A-273D-4BA4-BF86-B5EFE2ED76B1}.Release|Win32.Build.0 = Release|Win32 + EndGlobalSection + GlobalSection(SolutionProperties) = preSolution + HideSolutionNode = FALSE + EndGlobalSection +EndGlobal diff --git a/compat/libjpeg/makejvcx.v10 b/compat/libjpeg/makejvcx.v10 new file mode 100755 index 0000000..ccee287 --- /dev/null +++ b/compat/libjpeg/makejvcx.v10 @@ -0,0 +1,112 @@ +‹¯¨ + + + + Release + Win32 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Disabled + false + + + + + {019DBD2A-273D-4BA4-BF86-B5EFE2ED76B1} + Win32Proj + jpeg + + + + StaticLibrary + false + true + Unicode + + + + + + + + + + + + Level3 + NotUsing + Full + true + false + WIN32;NDEBUG;_LIB;_CRT_SECURE_NO_WARNINGS + true + true + + + Windows + true + true + true + + + + + + \ No newline at end of file diff --git a/compat/libjpeg/makeproj.mac b/compat/libjpeg/makeproj.mac new file mode 100755 index 0000000..4c01e15 --- /dev/null +++ b/compat/libjpeg/makeproj.mac @@ -0,0 +1,213 @@ +-- +-- makeproj.mac +-- +-- This AppleScript builds Code Warrior PRO Release 2 project files for the +-- libjpeg library as well as the test programs 'cjpeg', 'djpeg', 'jpegtran'. +-- (We'd distribute real project files, except they're not text +-- and would create maintenance headaches.) +-- +-- The script then compiles and links the library and the test programs. +-- NOTE: if you haven't already created a 'jconfig.h' file, the script +-- automatically copies 'jconfig.mac' to 'jconfig.h'. +-- +-- To use this script, you must have AppleScript 1.1 or later installed +-- and a suitable AppleScript editor like Script Editor or Script Debugger +-- (http://www.latenightsw.com). Open this file with your AppleScript +-- editor and execute the "run" command to build the projects. +-- +-- Thanks to Dan Sears and Don Agro for this script. +-- Questions about this script can be addressed to dogpark@interlog.com +-- + +on run + + choose folder with prompt ">>> Select IJG source folder <<<" + set ijg_folder to result + + choose folder with prompt ">>> Select MetroWerks folder <<<" + set cw_folder to result + + -- if jconfig.h doesn't already exist, copy jconfig.mac + + tell application "Finder" + if not (exists file "jconfig.h" of ijg_folder) then + duplicate {file "jconfig.mac" of folder ijg_folder} + select file "jconfig.mac copy" of folder ijg_folder + set name of selection to "jconfig.h" + end if + end tell + + tell application "CodeWarrior IDE 2.1" + with timeout of 10000 seconds + + -- create libjpeg project + + activate + Create Project (ijg_folder as string) & "libjpeg.proj" + Set Preferences of panel "Target Settings" to {Target Name:"libjpeg"} + Set Preferences of panel "PPC Project" to {File Name:"libjpeg"} + Set Preferences of panel "Target Settings" to {Linker:"MacOS PPC Linker"} + Set Preferences of panel "PPC Project" to {Project Type:library} + Set Preferences of panel "C/C++ Compiler" to {ANSI Strict:true} + Set Preferences of panel "C/C++ Compiler" to {Enums Always Ints:true} + Set Preferences of panel "PPC Codegen" to {Struct Alignment:PowerPC} + Set Preferences of panel "PPC Linker" to {Generate SYM File:false} + + Add Files (ijg_folder as string) & "jaricom.c" To Segment 1 + Add Files (ijg_folder as string) & "jcapimin.c" To Segment 1 + Add Files (ijg_folder as string) & "jcapistd.c" To Segment 1 + Add Files (ijg_folder as string) & "jcarith.c" To Segment 1 + Add Files (ijg_folder as string) & "jctrans.c" To Segment 1 + Add Files (ijg_folder as string) & "jcparam.c" To Segment 1 + Add Files (ijg_folder as string) & "jdatadst.c" To Segment 1 + Add Files (ijg_folder as string) & "jcinit.c" To Segment 1 + Add Files (ijg_folder as string) & "jcmaster.c" To Segment 1 + Add Files (ijg_folder as string) & "jcmarker.c" To Segment 1 + Add Files (ijg_folder as string) & "jcmainct.c" To Segment 1 + Add Files (ijg_folder as string) & "jcprepct.c" To Segment 1 + Add Files (ijg_folder as string) & "jccoefct.c" To Segment 1 + Add Files (ijg_folder as string) & "jccolor.c" To Segment 1 + Add Files (ijg_folder as string) & "jcsample.c" To Segment 1 + Add Files (ijg_folder as string) & "jchuff.c" To Segment 1 + Add Files (ijg_folder as string) & "jcdctmgr.c" To Segment 1 + Add Files (ijg_folder as string) & "jfdctfst.c" To Segment 1 + Add Files (ijg_folder as string) & "jfdctflt.c" To Segment 1 + Add Files (ijg_folder as string) & "jfdctint.c" To Segment 1 + Add Files (ijg_folder as string) & "jdapimin.c" To Segment 1 + Add Files (ijg_folder as string) & "jdapistd.c" To Segment 1 + Add Files (ijg_folder as string) & "jdarith.c" To Segment 1 + Add Files (ijg_folder as string) & "jdtrans.c" To Segment 1 + Add Files (ijg_folder as string) & "jdatasrc.c" To Segment 1 + Add Files (ijg_folder as string) & "jdmaster.c" To Segment 1 + Add Files (ijg_folder as string) & "jdinput.c" To Segment 1 + Add Files (ijg_folder as string) & "jdmarker.c" To Segment 1 + Add Files (ijg_folder as string) & "jdhuff.c" To Segment 1 + Add Files (ijg_folder as string) & "jdmainct.c" To Segment 1 + Add Files (ijg_folder as string) & "jdcoefct.c" To Segment 1 + Add Files (ijg_folder as string) & "jdpostct.c" To Segment 1 + Add Files (ijg_folder as string) & "jddctmgr.c" To Segment 1 + Add Files (ijg_folder as string) & "jidctfst.c" To Segment 1 + Add Files (ijg_folder as string) & "jidctflt.c" To Segment 1 + Add Files (ijg_folder as string) & "jidctint.c" To Segment 1 + Add Files (ijg_folder as string) & "jdsample.c" To Segment 1 + Add Files (ijg_folder as string) & "jdcolor.c" To Segment 1 + Add Files (ijg_folder as string) & "jquant1.c" To Segment 1 + Add Files (ijg_folder as string) & "jquant2.c" To Segment 1 + Add Files (ijg_folder as string) & "jdmerge.c" To Segment 1 + Add Files (ijg_folder as string) & "jcomapi.c" To Segment 1 + Add Files (ijg_folder as string) & "jutils.c" To Segment 1 + Add Files (ijg_folder as string) & "jerror.c" To Segment 1 + Add Files (ijg_folder as string) & "jmemmgr.c" To Segment 1 + Add Files (ijg_folder as string) & "jmemmac.c" To Segment 1 + + -- compile and link the library + + Make Project + Close Project + + -- create cjpeg project + + activate + Create Project (ijg_folder as string) & "cjpeg.proj" + Set Preferences of panel "Target Settings" to {Target Name:"cjpeg"} + Set Preferences of panel "PPC Project" to {File Name:"cjpeg"} + Set Preferences of panel "Target Settings" to {Linker:"MacOS PPC Linker"} + Set Preferences of panel "C/C++ Compiler" to {ANSI Strict:true} + Set Preferences of panel "C/C++ Compiler" to {Enums Always Ints:true} + Set Preferences of panel "PPC Codegen" to {Struct Alignment:PowerPC} + Set Preferences of panel "PPC Linker" to {Generate SYM File:false} + + Add Files (ijg_folder as string) & "cjpeg.c" To Segment 1 + Add Files (ijg_folder as string) & "rdppm.c" To Segment 1 + Add Files (ijg_folder as string) & "rdgif.c" To Segment 1 + Add Files (ijg_folder as string) & "rdtarga.c" To Segment 1 + Add Files (ijg_folder as string) & "rdrle.c" To Segment 1 + Add Files (ijg_folder as string) & "rdbmp.c" To Segment 1 + Add Files (ijg_folder as string) & "rdswitch.c" To Segment 1 + Add Files (ijg_folder as string) & "cdjpeg.c" To Segment 1 + + Add Files (ijg_folder as string) & "libjpeg" To Segment 2 + + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL C.PPC.Lib" To Segment 3 + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL SIOUX.PPC.Lib" To Segment 3 + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:Runtime:Runtime PPC:MSL RuntimePPC.Lib" To Segment 3 + + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:InterfaceLib" To Segment 4 + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:MathLib" To Segment 4 + + -- compile and link cjpeg + + Make Project + Close Project + + -- create djpeg project + + activate + Create Project (ijg_folder as string) & "djpeg.proj" + Set Preferences of panel "Target Settings" to {Target Name:"djpeg"} + Set Preferences of panel "PPC Project" to {File Name:"djpeg"} + Set Preferences of panel "Target Settings" to {Linker:"MacOS PPC Linker"} + Set Preferences of panel "C/C++ Compiler" to {ANSI Strict:true} + Set Preferences of panel "C/C++ Compiler" to {Enums Always Ints:true} + Set Preferences of panel "PPC Codegen" to {Struct Alignment:PowerPC} + Set Preferences of panel "PPC Linker" to {Generate SYM File:false} + + Add Files (ijg_folder as string) & "djpeg.c" To Segment 1 + Add Files (ijg_folder as string) & "wrppm.c" To Segment 1 + Add Files (ijg_folder as string) & "wrgif.c" To Segment 1 + Add Files (ijg_folder as string) & "wrtarga.c" To Segment 1 + Add Files (ijg_folder as string) & "wrrle.c" To Segment 1 + Add Files (ijg_folder as string) & "wrbmp.c" To Segment 1 + Add Files (ijg_folder as string) & "rdcolmap.c" To Segment 1 + Add Files (ijg_folder as string) & "cdjpeg.c" To Segment 1 + + Add Files (ijg_folder as string) & "libjpeg" To Segment 2 + + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL C.PPC.Lib" To Segment 3 + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL SIOUX.PPC.Lib" To Segment 3 + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:Runtime:Runtime PPC:MSL RuntimePPC.Lib" To Segment 3 + + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:InterfaceLib" To Segment 4 + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:MathLib" To Segment 4 + + -- compile and link djpeg + + Make Project + Close Project + + -- create jpegtran project + + activate + Create Project (ijg_folder as string) & "jpegtran.proj" + Set Preferences of panel "Target Settings" to {Target Name:"jpegtran"} + Set Preferences of panel "PPC Project" to {File Name:"jpegtran"} + Set Preferences of panel "Target Settings" to {Linker:"MacOS PPC Linker"} + Set Preferences of panel "C/C++ Compiler" to {ANSI Strict:true} + Set Preferences of panel "C/C++ Compiler" to {Enums Always Ints:true} + Set Preferences of panel "PPC Codegen" to {Struct Alignment:PowerPC} + Set Preferences of panel "PPC Linker" to {Generate SYM File:false} + + Add Files (ijg_folder as string) & "jpegtran.c" To Segment 1 + Add Files (ijg_folder as string) & "rdswitch.c" To Segment 1 + Add Files (ijg_folder as string) & "cdjpeg.c" To Segment 1 + Add Files (ijg_folder as string) & "transupp.c" To Segment 1 + + Add Files (ijg_folder as string) & "libjpeg" To Segment 2 + + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL C.PPC.Lib" To Segment 3 + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL SIOUX.PPC.Lib" To Segment 3 + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:Runtime:Runtime PPC:MSL RuntimePPC.Lib" To Segment 3 + + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:InterfaceLib" To Segment 4 + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:MathLib" To Segment 4 + + -- compile and link jpegtran + + Make Project + Close Project + + quit + + end timeout + end tell +end run diff --git a/compat/libjpeg/makerdep.vc6 b/compat/libjpeg/makerdep.vc6 new file mode 100755 index 0000000..94748d0 --- /dev/null +++ b/compat/libjpeg/makerdep.vc6 @@ -0,0 +1,6 @@ +# Microsoft Developer Studio erstellte Abh„ngigkeitsdatei, einbezogen von rdjpgcom.mak + +.\rdjpgcom.c : \ + ".\jconfig.h"\ + ".\jinclude.h"\ + diff --git a/compat/libjpeg/makerdsp.vc6 b/compat/libjpeg/makerdsp.vc6 new file mode 100755 index 0000000..60de09a --- /dev/null +++ b/compat/libjpeg/makerdsp.vc6 @@ -0,0 +1,78 @@ +# Microsoft Developer Studio Project File - Name="rdjpgcom" - Package Owner=<4> +# Microsoft Developer Studio Generated Build File, Format Version 6.00 +# ** NICHT BEARBEITEN ** + +# TARGTYPE "Win32 (x86) Console Application" 0x0103 + +CFG=rdjpgcom - Win32 +!MESSAGE Dies ist kein gltiges Makefile. Zum Erstellen dieses Projekts mit NMAKE +!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und fhren Sie den Befehl +!MESSAGE +!MESSAGE NMAKE /f "rdjpgcom.mak". +!MESSAGE +!MESSAGE Sie k÷nnen beim Ausfhren von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "rdjpgcom.mak" CFG="rdjpgcom - Win32" +!MESSAGE +!MESSAGE Fr die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "rdjpgcom - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE + +# Begin Project +# PROP AllowPerConfigDependencies 0 +# PROP Scc_ProjName "" +# PROP Scc_LocalPath "" +CPP=cl.exe +RSC=rc.exe +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir ".\rdjpgcom\Release" +# PROP BASE Intermediate_Dir ".\rdjpgcom\Release" +# PROP BASE Target_Dir ".\rdjpgcom" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir ".\rdjpgcom\Release" +# PROP Intermediate_Dir ".\rdjpgcom\Release" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir ".\rdjpgcom" +# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c +# ADD CPP /nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /FD /c +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# Begin Target + +# Name "rdjpgcom - Win32" +# Begin Group "Quellcodedateien" + +# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat;for;f90" +# Begin Source File + +SOURCE=.\rdjpgcom.c +# End Source File +# End Group +# Begin Group "Header-Dateien" + +# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd" +# Begin Source File + +SOURCE=.\jconfig.h +# End Source File +# Begin Source File + +SOURCE=.\jinclude.h +# End Source File +# End Group +# Begin Group "Ressourcendateien" + +# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe" +# End Group +# End Target +# End Project diff --git a/compat/libjpeg/makerfil.v10 b/compat/libjpeg/makerfil.v10 new file mode 100755 index 0000000..d14914a --- /dev/null +++ b/compat/libjpeg/makerfil.v10 @@ -0,0 +1,30 @@ +‹¯¨ + + + + {4FC737F1-C7A5-4376-A066-2A32D752A2FF} + cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx + + + {93995380-89BD-4b04-88EB-625FBE52EBFB} + h;hpp;hxx;hm;inl;inc;xsd + + + {67DA6AB6-F800-4c08-8B7A-83BB121AAD01} + rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms + + + + + Header Files + + + Header Files + + + + + Source Files + + + \ No newline at end of file diff --git a/compat/libjpeg/makermak.vc6 b/compat/libjpeg/makermak.vc6 new file mode 100755 index 0000000..6d2d4c7 --- /dev/null +++ b/compat/libjpeg/makermak.vc6 @@ -0,0 +1,110 @@ +# Microsoft Developer Studio Generated NMAKE File, Based on rdjpgcom.dsp +!IF "$(CFG)" == "" +CFG=rdjpgcom - Win32 +!MESSAGE Keine Konfiguration angegeben. rdjpgcom - Win32 wird als Standard verwendet. +!ENDIF + +!IF "$(CFG)" != "rdjpgcom - Win32" +!MESSAGE Ungültige Konfiguration "$(CFG)" angegeben. +!MESSAGE Sie können beim Ausführen von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "rdjpgcom.mak" CFG="rdjpgcom - Win32" +!MESSAGE +!MESSAGE Für die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "rdjpgcom - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE +!ERROR Eine ungültige Konfiguration wurde angegeben. +!ENDIF + +!IF "$(OS)" == "Windows_NT" +NULL= +!ELSE +NULL=nul +!ENDIF + +CPP=cl.exe +RSC=rc.exe +OUTDIR=.\rdjpgcom\Release +INTDIR=.\rdjpgcom\Release +# Begin Custom Macros +OutDir=.\rdjpgcom\Release +# End Custom Macros + +ALL : "$(OUTDIR)\rdjpgcom.exe" + + +CLEAN : + -@erase "$(INTDIR)\rdjpgcom.obj" + -@erase "$(INTDIR)\vc60.idb" + -@erase "$(OUTDIR)\rdjpgcom.exe" + +"$(OUTDIR)" : + if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" + +BSC32=bscmake.exe +BSC32_FLAGS=/nologo /o"$(OUTDIR)\rdjpgcom.bsc" +BSC32_SBRS= \ + +LINK32=link.exe +LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\rdjpgcom.pdb" /machine:I386 /out:"$(OUTDIR)\rdjpgcom.exe" +LINK32_OBJS= \ + "$(INTDIR)\rdjpgcom.obj" + +"$(OUTDIR)\rdjpgcom.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS) + $(LINK32) @<< + $(LINK32_FLAGS) $(LINK32_OBJS) +<< + +CPP_PROJ=/nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /Fp"$(INTDIR)\rdjpgcom.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c + +.c{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.c{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + + +!IF "$(NO_EXTERNAL_DEPS)" != "1" +!IF EXISTS("rdjpgcom.dep") +!INCLUDE "rdjpgcom.dep" +!ELSE +!MESSAGE Warning: cannot find "rdjpgcom.dep" +!ENDIF +!ENDIF + + +!IF "$(CFG)" == "rdjpgcom - Win32" +SOURCE=.\rdjpgcom.c + +"$(INTDIR)\rdjpgcom.obj" : $(SOURCE) "$(INTDIR)" + + + +!ENDIF + diff --git a/compat/libjpeg/makervcx.v10 b/compat/libjpeg/makervcx.v10 new file mode 100755 index 0000000..366d4fc --- /dev/null +++ b/compat/libjpeg/makervcx.v10 @@ -0,0 +1,62 @@ +‹¯¨ + + + + Release + Win32 + + + + {C81513DB-78DC-46BC-BC98-82E745203976} + Win32Proj + rdjpgcom + + + + Application + false + true + Unicode + + + + + + + + + + false + $(ProjectName)\$(Configuration)\ + $(ProjectName)\$(Configuration)\ + + + + Level3 + NotUsing + Full + true + false + WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS + true + true + 4996 + + + Console + true + true + true + + + + + + + + + + + + + \ No newline at end of file diff --git a/compat/libjpeg/maketdep.vc6 b/compat/libjpeg/maketdep.vc6 new file mode 100755 index 0000000..e177ecb --- /dev/null +++ b/compat/libjpeg/maketdep.vc6 @@ -0,0 +1,43 @@ +# Microsoft Developer Studio erstellte Abh„ngigkeitsdatei, einbezogen von jpegtran.mak + +.\cdjpeg.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\jpegtran.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + ".\jversion.h"\ + ".\transupp.h"\ + + +.\rdswitch.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\transupp.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + ".\transupp.h"\ + diff --git a/compat/libjpeg/maketdsp.vc6 b/compat/libjpeg/maketdsp.vc6 new file mode 100755 index 0000000..fe1ae9a --- /dev/null +++ b/compat/libjpeg/maketdsp.vc6 @@ -0,0 +1,122 @@ +# Microsoft Developer Studio Project File - Name="jpegtran" - Package Owner=<4> +# Microsoft Developer Studio Generated Build File, Format Version 6.00 +# ** NICHT BEARBEITEN ** + +# TARGTYPE "Win32 (x86) Console Application" 0x0103 + +CFG=jpegtran - Win32 +!MESSAGE Dies ist kein gltiges Makefile. Zum Erstellen dieses Projekts mit NMAKE +!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und fhren Sie den Befehl +!MESSAGE +!MESSAGE NMAKE /f "jpegtran.mak". +!MESSAGE +!MESSAGE Sie k÷nnen beim Ausfhren von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "jpegtran.mak" CFG="jpegtran - Win32" +!MESSAGE +!MESSAGE Fr die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "jpegtran - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE + +# Begin Project +# PROP AllowPerConfigDependencies 0 +# PROP Scc_ProjName "" +# PROP Scc_LocalPath "" +CPP=cl.exe +RSC=rc.exe +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir ".\jpegtran\Release" +# PROP BASE Intermediate_Dir ".\jpegtran\Release" +# PROP BASE Target_Dir ".\jpegtran" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir ".\jpegtran\Release" +# PROP Intermediate_Dir ".\jpegtran\Release" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir ".\jpegtran" +# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c +# ADD CPP /nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /FD /c +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# Begin Target + +# Name "jpegtran - Win32" +# Begin Group "Quellcodedateien" + +# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat;for;f90" +# Begin Source File + +SOURCE=.\cdjpeg.c +# End Source File +# Begin Source File + +SOURCE=.\jpegtran.c +# End Source File +# Begin Source File + +SOURCE=.\rdswitch.c +# End Source File +# Begin Source File + +SOURCE=.\transupp.c +# End Source File +# End Group +# Begin Group "Header-Dateien" + +# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd" +# Begin Source File + +SOURCE=.\cderror.h +# End Source File +# Begin Source File + +SOURCE=.\cdjpeg.h +# End Source File +# Begin Source File + +SOURCE=.\jconfig.h +# End Source File +# Begin Source File + +SOURCE=.\jerror.h +# End Source File +# Begin Source File + +SOURCE=.\jinclude.h +# End Source File +# Begin Source File + +SOURCE=.\jmorecfg.h +# End Source File +# Begin Source File + +SOURCE=.\jpegint.h +# End Source File +# Begin Source File + +SOURCE=.\jpeglib.h +# End Source File +# Begin Source File + +SOURCE=.\jversion.h +# End Source File +# Begin Source File + +SOURCE=.\transupp.h +# End Source File +# End Group +# Begin Group "Ressourcendateien" + +# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe" +# End Group +# End Target +# End Project diff --git a/compat/libjpeg/maketfil.v10 b/compat/libjpeg/maketfil.v10 new file mode 100755 index 0000000..fae0094 --- /dev/null +++ b/compat/libjpeg/maketfil.v10 @@ -0,0 +1,63 @@ +‹¯¨ + + + + {4FC737F1-C7A5-4376-A066-2A32D752A2FF} + cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx + + + {93995380-89BD-4b04-88EB-625FBE52EBFB} + h;hpp;hxx;hm;inl;inc;xsd + + + {67DA6AB6-F800-4c08-8B7A-83BB121AAD01} + rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms + + + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + \ No newline at end of file diff --git a/compat/libjpeg/maketmak.vc6 b/compat/libjpeg/maketmak.vc6 new file mode 100755 index 0000000..a0de38c --- /dev/null +++ b/compat/libjpeg/maketmak.vc6 @@ -0,0 +1,131 @@ +# Microsoft Developer Studio Generated NMAKE File, Based on jpegtran.dsp +!IF "$(CFG)" == "" +CFG=jpegtran - Win32 +!MESSAGE Keine Konfiguration angegeben. jpegtran - Win32 wird als Standard verwendet. +!ENDIF + +!IF "$(CFG)" != "jpegtran - Win32" +!MESSAGE Ungültige Konfiguration "$(CFG)" angegeben. +!MESSAGE Sie können beim Ausführen von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "jpegtran.mak" CFG="jpegtran - Win32" +!MESSAGE +!MESSAGE Für die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "jpegtran - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE +!ERROR Eine ungültige Konfiguration wurde angegeben. +!ENDIF + +!IF "$(OS)" == "Windows_NT" +NULL= +!ELSE +NULL=nul +!ENDIF + +CPP=cl.exe +RSC=rc.exe +OUTDIR=.\jpegtran\Release +INTDIR=.\jpegtran\Release +# Begin Custom Macros +OutDir=.\jpegtran\Release +# End Custom Macros + +ALL : "$(OUTDIR)\jpegtran.exe" + + +CLEAN : + -@erase "$(INTDIR)\cdjpeg.obj" + -@erase "$(INTDIR)\jpegtran.obj" + -@erase "$(INTDIR)\rdswitch.obj" + -@erase "$(INTDIR)\transupp.obj" + -@erase "$(INTDIR)\vc60.idb" + -@erase "$(OUTDIR)\jpegtran.exe" + +"$(OUTDIR)" : + if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" + +BSC32=bscmake.exe +BSC32_FLAGS=/nologo /o"$(OUTDIR)\jpegtran.bsc" +BSC32_SBRS= \ + +LINK32=link.exe +LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\jpegtran.pdb" /machine:I386 /out:"$(OUTDIR)\jpegtran.exe" +LINK32_OBJS= \ + "$(INTDIR)\cdjpeg.obj" \ + "$(INTDIR)\jpegtran.obj" \ + "$(INTDIR)\rdswitch.obj" \ + "$(INTDIR)\transupp.obj" + +"$(OUTDIR)\jpegtran.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS) + $(LINK32) @<< + $(LINK32_FLAGS) $(LINK32_OBJS) +<< + +CPP_PROJ=/nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /Fp"$(INTDIR)\jpegtran.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c + +.c{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.c{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + + +!IF "$(NO_EXTERNAL_DEPS)" != "1" +!IF EXISTS("jpegtran.dep") +!INCLUDE "jpegtran.dep" +!ELSE +!MESSAGE Warning: cannot find "jpegtran.dep" +!ENDIF +!ENDIF + + +!IF "$(CFG)" == "jpegtran - Win32" +SOURCE=.\cdjpeg.c + +"$(INTDIR)\cdjpeg.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jpegtran.c + +"$(INTDIR)\jpegtran.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\rdswitch.c + +"$(INTDIR)\rdswitch.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\transupp.c + +"$(INTDIR)\transupp.obj" : $(SOURCE) "$(INTDIR)" + + + +!ENDIF + diff --git a/compat/libjpeg/maketvcx.v10 b/compat/libjpeg/maketvcx.v10 new file mode 100755 index 0000000..e2b4ea3 --- /dev/null +++ b/compat/libjpeg/maketvcx.v10 @@ -0,0 +1,74 @@ +‹¯¨ + + + + Release + Win32 + + + + {025BAC50-51B5-4FFE-BC47-3F920BB4047E} + Win32Proj + jpegtran + + + + Application + false + true + Unicode + + + + + + + + + + false + $(ProjectName)\$(Configuration)\ + $(ProjectName)\$(Configuration)\ + + + + Level3 + NotUsing + Full + true + false + WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS + true + true + 4996 + + + Console + true + true + true + Release\jpeg.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies) + + + + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/compat/libjpeg/makewdep.vc6 b/compat/libjpeg/makewdep.vc6 new file mode 100755 index 0000000..15929bf --- /dev/null +++ b/compat/libjpeg/makewdep.vc6 @@ -0,0 +1,6 @@ +# Microsoft Developer Studio erstellte Abh„ngigkeitsdatei, einbezogen von wrjpgcom.mak + +.\wrjpgcom.c : \ + ".\jconfig.h"\ + ".\jinclude.h"\ + diff --git a/compat/libjpeg/makewdsp.vc6 b/compat/libjpeg/makewdsp.vc6 new file mode 100755 index 0000000..2063b1a --- /dev/null +++ b/compat/libjpeg/makewdsp.vc6 @@ -0,0 +1,78 @@ +# Microsoft Developer Studio Project File - Name="wrjpgcom" - Package Owner=<4> +# Microsoft Developer Studio Generated Build File, Format Version 6.00 +# ** NICHT BEARBEITEN ** + +# TARGTYPE "Win32 (x86) Console Application" 0x0103 + +CFG=wrjpgcom - Win32 +!MESSAGE Dies ist kein gltiges Makefile. Zum Erstellen dieses Projekts mit NMAKE +!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und fhren Sie den Befehl +!MESSAGE +!MESSAGE NMAKE /f "wrjpgcom.mak". +!MESSAGE +!MESSAGE Sie k÷nnen beim Ausfhren von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "wrjpgcom.mak" CFG="wrjpgcom - Win32" +!MESSAGE +!MESSAGE Fr die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "wrjpgcom - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE + +# Begin Project +# PROP AllowPerConfigDependencies 0 +# PROP Scc_ProjName "" +# PROP Scc_LocalPath "" +CPP=cl.exe +RSC=rc.exe +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir ".\wrjpgcom\Release" +# PROP BASE Intermediate_Dir ".\wrjpgcom\Release" +# PROP BASE Target_Dir ".\wrjpgcom" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir ".\wrjpgcom\Release" +# PROP Intermediate_Dir ".\wrjpgcom\Release" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir ".\wrjpgcom" +# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c +# ADD CPP /nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /FD /c +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# Begin Target + +# Name "wrjpgcom - Win32" +# Begin Group "Quellcodedateien" + +# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat;for;f90" +# Begin Source File + +SOURCE=.\wrjpgcom.c +# End Source File +# End Group +# Begin Group "Header-Dateien" + +# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd" +# Begin Source File + +SOURCE=.\jconfig.h +# End Source File +# Begin Source File + +SOURCE=.\jinclude.h +# End Source File +# End Group +# Begin Group "Ressourcendateien" + +# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe" +# End Group +# End Target +# End Project diff --git a/compat/libjpeg/makewfil.v10 b/compat/libjpeg/makewfil.v10 new file mode 100755 index 0000000..72c5856 --- /dev/null +++ b/compat/libjpeg/makewfil.v10 @@ -0,0 +1,30 @@ +‹¯¨ + + + + {4FC737F1-C7A5-4376-A066-2A32D752A2FF} + cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx + + + {93995380-89BD-4b04-88EB-625FBE52EBFB} + h;hpp;hxx;hm;inl;inc;xsd + + + {67DA6AB6-F800-4c08-8B7A-83BB121AAD01} + rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms + + + + + Header Files + + + Header Files + + + + + Source Files + + + \ No newline at end of file diff --git a/compat/libjpeg/makewmak.vc6 b/compat/libjpeg/makewmak.vc6 new file mode 100755 index 0000000..22b9086 --- /dev/null +++ b/compat/libjpeg/makewmak.vc6 @@ -0,0 +1,110 @@ +# Microsoft Developer Studio Generated NMAKE File, Based on wrjpgcom.dsp +!IF "$(CFG)" == "" +CFG=wrjpgcom - Win32 +!MESSAGE Keine Konfiguration angegeben. wrjpgcom - Win32 wird als Standard verwendet. +!ENDIF + +!IF "$(CFG)" != "wrjpgcom - Win32" +!MESSAGE Ungültige Konfiguration "$(CFG)" angegeben. +!MESSAGE Sie können beim Ausführen von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "wrjpgcom.mak" CFG="wrjpgcom - Win32" +!MESSAGE +!MESSAGE Für die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "wrjpgcom - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE +!ERROR Eine ungültige Konfiguration wurde angegeben. +!ENDIF + +!IF "$(OS)" == "Windows_NT" +NULL= +!ELSE +NULL=nul +!ENDIF + +CPP=cl.exe +RSC=rc.exe +OUTDIR=.\wrjpgcom\Release +INTDIR=.\wrjpgcom\Release +# Begin Custom Macros +OutDir=.\wrjpgcom\Release +# End Custom Macros + +ALL : "$(OUTDIR)\wrjpgcom.exe" + + +CLEAN : + -@erase "$(INTDIR)\vc60.idb" + -@erase "$(INTDIR)\wrjpgcom.obj" + -@erase "$(OUTDIR)\wrjpgcom.exe" + +"$(OUTDIR)" : + if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" + +BSC32=bscmake.exe +BSC32_FLAGS=/nologo /o"$(OUTDIR)\wrjpgcom.bsc" +BSC32_SBRS= \ + +LINK32=link.exe +LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\wrjpgcom.pdb" /machine:I386 /out:"$(OUTDIR)\wrjpgcom.exe" +LINK32_OBJS= \ + "$(INTDIR)\wrjpgcom.obj" + +"$(OUTDIR)\wrjpgcom.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS) + $(LINK32) @<< + $(LINK32_FLAGS) $(LINK32_OBJS) +<< + +CPP_PROJ=/nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /Fp"$(INTDIR)\wrjpgcom.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c + +.c{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.c{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + + +!IF "$(NO_EXTERNAL_DEPS)" != "1" +!IF EXISTS("wrjpgcom.dep") +!INCLUDE "wrjpgcom.dep" +!ELSE +!MESSAGE Warning: cannot find "wrjpgcom.dep" +!ENDIF +!ENDIF + + +!IF "$(CFG)" == "wrjpgcom - Win32" +SOURCE=.\wrjpgcom.c + +"$(INTDIR)\wrjpgcom.obj" : $(SOURCE) "$(INTDIR)" + + + +!ENDIF + diff --git a/compat/libjpeg/makewvcx.v10 b/compat/libjpeg/makewvcx.v10 new file mode 100755 index 0000000..e6c546a --- /dev/null +++ b/compat/libjpeg/makewvcx.v10 @@ -0,0 +1,62 @@ +‹¯¨ + + + + Release + Win32 + + + + {B57065D4-DDDA-4668-BAF5-2D49270C973C} + Win32Proj + wrjpgcom + + + + Application + false + true + Unicode + + + + + + + + + + false + $(ProjectName)\$(Configuration)\ + $(ProjectName)\$(Configuration)\ + + + + Level3 + NotUsing + Full + true + false + WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS + true + true + 4996 + + + Console + true + true + true + + + + + + + + + + + + + \ No newline at end of file diff --git a/compat/libjpeg/makljpeg.st b/compat/libjpeg/makljpeg.st new file mode 100755 index 0000000..0720fb5 --- /dev/null +++ b/compat/libjpeg/makljpeg.st @@ -0,0 +1,68 @@ +; Project file for Independent JPEG Group's software +; +; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C. +; Thanks to Frank Moehle, B. Setzepfandt, and Guido Vollbeding. +; +; To use this file, rename it to libjpeg.prj. +; Read installation instructions before trying to make the program! +; +; +; * * * Output file * * * +libjpeg.lib +; +; * * * COMPILER OPTIONS * * * +.C[-P] ; absolute calls +.C[-M] ; and no string merging, folks +.C[-w-cln] ; no "constant is long" warnings +.C[-w-par] ; no "parameter xxxx unused" +.C[-w-rch] ; no "unreachable code" +.C[-wsig] ; warn if significant digits may be lost +.L[-J] ; link new Obj-format (so we get a library) += +; * * * * List of modules * * * * +jaricom.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcapimin.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcapistd.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcarith.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jccoefct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jccolor.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcdctmgr.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) +jchuff.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcinit.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcmainct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcmarker.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcmaster.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcomapi.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcparam.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcprepct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcsample.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jctrans.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdapimin.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdapistd.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdarith.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdatadst.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h) +jdatasrc.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h) +jdcoefct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdcolor.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jddctmgr.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) +jdhuff.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdinput.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdmainct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdmarker.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdmaster.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdmerge.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdpostct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdsample.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdtrans.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jerror.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jversion.h,jerror.h) +jfdctflt.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) +jfdctfst.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) +jfdctint.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) +jidctflt.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) +jidctfst.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) +jidctint.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) +jquant1.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jquant2.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jutils.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jmemmgr.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jmemsys.h) +jmemansi.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jmemsys.h) diff --git a/compat/libjpeg/maktjpeg.st b/compat/libjpeg/maktjpeg.st new file mode 100755 index 0000000..25ce926 --- /dev/null +++ b/compat/libjpeg/maktjpeg.st @@ -0,0 +1,30 @@ +; Project file for Independent JPEG Group's software +; +; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C. +; Thanks to Frank Moehle, B. Setzepfandt, and Guido Vollbeding. +; +; To use this file, rename it to jpegtran.prj. +; If you are using Turbo C, change filenames beginning with "pc..." to "tc..." +; Read installation instructions before trying to make the program! +; +; +; * * * Output file * * * +jpegtran.ttp +; +; * * * COMPILER OPTIONS * * * +.C[-P] ; absolute calls +.C[-M] ; and no string merging, folks +.C[-w-cln] ; no "constant is long" warnings +.C[-w-par] ; no "parameter xxxx unused" +.C[-w-rch] ; no "unreachable code" +.C[-wsig] ; warn if significant digits may be lost += +; * * * * List of modules * * * * +pcstart.o +jpegtran.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h,transupp.h,jversion.h) +cdjpeg.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +rdswitch.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +transupp.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,transupp.h) +libjpeg.lib ; built by libjpeg.prj +pcstdlib.lib ; standard library +pcextlib.lib ; extended library diff --git a/compat/libjpeg/makvms.opt b/compat/libjpeg/makvms.opt new file mode 100755 index 0000000..26db714 --- /dev/null +++ b/compat/libjpeg/makvms.opt @@ -0,0 +1,4 @@ +! A pointer to the VAX/VMS C Run-Time Shareable Library. +! This file is needed by makefile.mms and makefile.vms, +! but only for the older VAX C compiler. DEC C does not need it. +Sys$Library:VAXCRTL.EXE /Share diff --git a/compat/libjpeg/missing b/compat/libjpeg/missing new file mode 100755 index 0000000..f62bbae --- /dev/null +++ b/compat/libjpeg/missing @@ -0,0 +1,215 @@ +#! /bin/sh +# Common wrapper for a few potentially missing GNU programs. + +scriptversion=2013-10-28.13; # UTC + +# Copyright (C) 1996-2014 Free Software Foundation, Inc. +# Originally written by Fran,cois Pinard , 1996. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +if test $# -eq 0; then + echo 1>&2 "Try '$0 --help' for more information" + exit 1 +fi + +case $1 in + + --is-lightweight) + # Used by our autoconf macros to check whether the available missing + # script is modern enough. + exit 0 + ;; + + --run) + # Back-compat with the calling convention used by older automake. + shift + ;; + + -h|--h|--he|--hel|--help) + echo "\ +$0 [OPTION]... PROGRAM [ARGUMENT]... + +Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due +to PROGRAM being missing or too old. + +Options: + -h, --help display this help and exit + -v, --version output version information and exit + +Supported PROGRAM values: + aclocal autoconf autoheader autom4te automake makeinfo + bison yacc flex lex help2man + +Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and +'g' are ignored when checking the name. + +Send bug reports to ." + exit $? + ;; + + -v|--v|--ve|--ver|--vers|--versi|--versio|--version) + echo "missing $scriptversion (GNU Automake)" + exit $? + ;; + + -*) + echo 1>&2 "$0: unknown '$1' option" + echo 1>&2 "Try '$0 --help' for more information" + exit 1 + ;; + +esac + +# Run the given program, remember its exit status. +"$@"; st=$? + +# If it succeeded, we are done. +test $st -eq 0 && exit 0 + +# Also exit now if we it failed (or wasn't found), and '--version' was +# passed; such an option is passed most likely to detect whether the +# program is present and works. +case $2 in --version|--help) exit $st;; esac + +# Exit code 63 means version mismatch. This often happens when the user +# tries to use an ancient version of a tool on a file that requires a +# minimum version. +if test $st -eq 63; then + msg="probably too old" +elif test $st -eq 127; then + # Program was missing. + msg="missing on your system" +else + # Program was found and executed, but failed. Give up. + exit $st +fi + +perl_URL=http://www.perl.org/ +flex_URL=http://flex.sourceforge.net/ +gnu_software_URL=http://www.gnu.org/software + +program_details () +{ + case $1 in + aclocal|automake) + echo "The '$1' program is part of the GNU Automake package:" + echo "<$gnu_software_URL/automake>" + echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:" + echo "<$gnu_software_URL/autoconf>" + echo "<$gnu_software_URL/m4/>" + echo "<$perl_URL>" + ;; + autoconf|autom4te|autoheader) + echo "The '$1' program is part of the GNU Autoconf package:" + echo "<$gnu_software_URL/autoconf/>" + echo "It also requires GNU m4 and Perl in order to run:" + echo "<$gnu_software_URL/m4/>" + echo "<$perl_URL>" + ;; + esac +} + +give_advice () +{ + # Normalize program name to check for. + normalized_program=`echo "$1" | sed ' + s/^gnu-//; t + s/^gnu//; t + s/^g//; t'` + + printf '%s\n' "'$1' is $msg." + + configure_deps="'configure.ac' or m4 files included by 'configure.ac'" + case $normalized_program in + autoconf*) + echo "You should only need it if you modified 'configure.ac'," + echo "or m4 files included by it." + program_details 'autoconf' + ;; + autoheader*) + echo "You should only need it if you modified 'acconfig.h' or" + echo "$configure_deps." + program_details 'autoheader' + ;; + automake*) + echo "You should only need it if you modified 'Makefile.am' or" + echo "$configure_deps." + program_details 'automake' + ;; + aclocal*) + echo "You should only need it if you modified 'acinclude.m4' or" + echo "$configure_deps." + program_details 'aclocal' + ;; + autom4te*) + echo "You might have modified some maintainer files that require" + echo "the 'autom4te' program to be rebuilt." + program_details 'autom4te' + ;; + bison*|yacc*) + echo "You should only need it if you modified a '.y' file." + echo "You may want to install the GNU Bison package:" + echo "<$gnu_software_URL/bison/>" + ;; + lex*|flex*) + echo "You should only need it if you modified a '.l' file." + echo "You may want to install the Fast Lexical Analyzer package:" + echo "<$flex_URL>" + ;; + help2man*) + echo "You should only need it if you modified a dependency" \ + "of a man page." + echo "You may want to install the GNU Help2man package:" + echo "<$gnu_software_URL/help2man/>" + ;; + makeinfo*) + echo "You should only need it if you modified a '.texi' file, or" + echo "any other file indirectly affecting the aspect of the manual." + echo "You might want to install the Texinfo package:" + echo "<$gnu_software_URL/texinfo/>" + echo "The spurious makeinfo call might also be the consequence of" + echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might" + echo "want to install GNU make:" + echo "<$gnu_software_URL/make/>" + ;; + *) + echo "You might have modified some files without having the proper" + echo "tools for further handling them. Check the 'README' file, it" + echo "often tells you about the needed prerequisites for installing" + echo "this package. You may also peek at any GNU archive site, in" + echo "case some other package contains this missing '$1' program." + ;; + esac +} + +give_advice "$1" | sed -e '1s/^/WARNING: /' \ + -e '2,$s/^/ /' >&2 + +# Propagate the correct exit status (expected to be 127 for a program +# not found, 63 for a program that failed due to version mismatch). +exit $st + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/compat/libjpeg/rdbmp.c b/compat/libjpeg/rdbmp.c new file mode 100755 index 0000000..dfdf96f --- /dev/null +++ b/compat/libjpeg/rdbmp.c @@ -0,0 +1,480 @@ +/* + * rdbmp.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2009-2010 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to read input images in Microsoft "BMP" + * format (MS Windows 3.x, OS/2 1.x, and OS/2 2.x flavors). + * Currently, only 8-bit and 24-bit images are supported, not 1-bit or + * 4-bit (feeding such low-depth images into JPEG would be silly anyway). + * Also, we don't support RLE-compressed files. + * + * These routines may need modification for non-Unix environments or + * specialized applications. As they stand, they assume input from + * an ordinary stdio stream. They further assume that reading begins + * at the start of the file; start_input may need work if the + * user interface has already read some data (e.g., to determine that + * the file is indeed BMP format). + * + * This code contributed by James Arthur Boucher. + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ + +#ifdef BMP_SUPPORTED + + +/* Macros to deal with unsigned chars as efficiently as compiler allows */ + +#ifdef HAVE_UNSIGNED_CHAR +typedef unsigned char U_CHAR; +#define UCH(x) ((int) (x)) +#else /* !HAVE_UNSIGNED_CHAR */ +#ifdef CHAR_IS_UNSIGNED +typedef char U_CHAR; +#define UCH(x) ((int) (x)) +#else +typedef char U_CHAR; +#define UCH(x) ((int) (x) & 0xFF) +#endif +#endif /* HAVE_UNSIGNED_CHAR */ + + +#define ReadOK(file,buffer,len) (JFREAD(file,buffer,len) == ((size_t) (len))) + + +/* Private version of data source object */ + +typedef struct _bmp_source_struct * bmp_source_ptr; + +typedef struct _bmp_source_struct { + struct cjpeg_source_struct pub; /* public fields */ + + j_compress_ptr cinfo; /* back link saves passing separate parm */ + + JSAMPARRAY colormap; /* BMP colormap (converted to my format) */ + + jvirt_sarray_ptr whole_image; /* Needed to reverse row order */ + JDIMENSION source_row; /* Current source row number */ + JDIMENSION row_width; /* Physical width of scanlines in file */ + + int bits_per_pixel; /* remembers 8- or 24-bit format */ +} bmp_source_struct; + + +LOCAL(int) +read_byte (bmp_source_ptr sinfo) +/* Read next byte from BMP file */ +{ + register FILE *infile = sinfo->pub.input_file; + register int c; + + if ((c = getc(infile)) == EOF) + ERREXIT(sinfo->cinfo, JERR_INPUT_EOF); + return c; +} + + +LOCAL(void) +read_colormap (bmp_source_ptr sinfo, int cmaplen, int mapentrysize) +/* Read the colormap from a BMP file */ +{ + int i; + + switch (mapentrysize) { + case 3: + /* BGR format (occurs in OS/2 files) */ + for (i = 0; i < cmaplen; i++) { + sinfo->colormap[2][i] = (JSAMPLE) read_byte(sinfo); + sinfo->colormap[1][i] = (JSAMPLE) read_byte(sinfo); + sinfo->colormap[0][i] = (JSAMPLE) read_byte(sinfo); + } + break; + case 4: + /* BGR0 format (occurs in MS Windows files) */ + for (i = 0; i < cmaplen; i++) { + sinfo->colormap[2][i] = (JSAMPLE) read_byte(sinfo); + sinfo->colormap[1][i] = (JSAMPLE) read_byte(sinfo); + sinfo->colormap[0][i] = (JSAMPLE) read_byte(sinfo); + (void) read_byte(sinfo); + } + break; + default: + ERREXIT(sinfo->cinfo, JERR_BMP_BADCMAP); + break; + } +} + + +/* + * Read one row of pixels. + * The image has been read into the whole_image array, but is otherwise + * unprocessed. We must read it out in top-to-bottom row order, and if + * it is an 8-bit image, we must expand colormapped pixels to 24bit format. + */ + +METHODDEF(JDIMENSION) +get_8bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading 8-bit colormap indexes */ +{ + bmp_source_ptr source = (bmp_source_ptr) sinfo; + register JSAMPARRAY colormap = source->colormap; + JSAMPARRAY image_ptr; + register int t; + register JSAMPROW inptr, outptr; + register JDIMENSION col; + + /* Fetch next row from virtual array */ + source->source_row--; + image_ptr = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, source->whole_image, + source->source_row, (JDIMENSION) 1, FALSE); + + /* Expand the colormap indexes to real data */ + inptr = image_ptr[0]; + outptr = source->pub.buffer[0]; + for (col = cinfo->image_width; col > 0; col--) { + t = GETJSAMPLE(*inptr++); + *outptr++ = colormap[0][t]; /* can omit GETJSAMPLE() safely */ + *outptr++ = colormap[1][t]; + *outptr++ = colormap[2][t]; + } + + return 1; +} + + +METHODDEF(JDIMENSION) +get_24bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading 24-bit pixels */ +{ + bmp_source_ptr source = (bmp_source_ptr) sinfo; + JSAMPARRAY image_ptr; + register JSAMPROW inptr, outptr; + register JDIMENSION col; + + /* Fetch next row from virtual array */ + source->source_row--; + image_ptr = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, source->whole_image, + source->source_row, (JDIMENSION) 1, FALSE); + + /* Transfer data. Note source values are in BGR order + * (even though Microsoft's own documents say the opposite). + */ + inptr = image_ptr[0]; + outptr = source->pub.buffer[0]; + for (col = cinfo->image_width; col > 0; col--) { + outptr[2] = *inptr++; /* can omit GETJSAMPLE() safely */ + outptr[1] = *inptr++; + outptr[0] = *inptr++; + outptr += 3; + } + + return 1; +} + + +METHODDEF(JDIMENSION) +get_32bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading 32-bit pixels */ +{ + bmp_source_ptr source = (bmp_source_ptr) sinfo; + JSAMPARRAY image_ptr; + register JSAMPROW inptr, outptr; + register JDIMENSION col; + + /* Fetch next row from virtual array */ + source->source_row--; + image_ptr = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, source->whole_image, + source->source_row, (JDIMENSION) 1, FALSE); + /* Transfer data. Note source values are in BGR order + * (even though Microsoft's own documents say the opposite). + */ + inptr = image_ptr[0]; + outptr = source->pub.buffer[0]; + for (col = cinfo->image_width; col > 0; col--) { + outptr[2] = *inptr++; /* can omit GETJSAMPLE() safely */ + outptr[1] = *inptr++; + outptr[0] = *inptr++; + inptr++; /* skip the 4th byte (Alpha channel) */ + outptr += 3; + } + + return 1; +} + + +/* + * This method loads the image into whole_image during the first call on + * get_pixel_rows. The get_pixel_rows pointer is then adjusted to call + * get_8bit_row, get_24bit_row, or get_32bit_row on subsequent calls. + */ + +METHODDEF(JDIMENSION) +preload_image (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + bmp_source_ptr source = (bmp_source_ptr) sinfo; + register FILE *infile = source->pub.input_file; + register int c; + register JSAMPROW out_ptr; + JSAMPARRAY image_ptr; + JDIMENSION row, col; + cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; + + /* Read the data into a virtual array in input-file row order. */ + for (row = 0; row < cinfo->image_height; row++) { + if (progress != NULL) { + progress->pub.pass_counter = (long) row; + progress->pub.pass_limit = (long) cinfo->image_height; + (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); + } + image_ptr = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, source->whole_image, + row, (JDIMENSION) 1, TRUE); + out_ptr = image_ptr[0]; + for (col = source->row_width; col > 0; col--) { + /* inline copy of read_byte() for speed */ + if ((c = getc(infile)) == EOF) + ERREXIT(cinfo, JERR_INPUT_EOF); + *out_ptr++ = (JSAMPLE) c; + } + } + if (progress != NULL) + progress->completed_extra_passes++; + + /* Set up to read from the virtual array in top-to-bottom order */ + switch (source->bits_per_pixel) { + case 8: + source->pub.get_pixel_rows = get_8bit_row; + break; + case 24: + source->pub.get_pixel_rows = get_24bit_row; + break; + case 32: + source->pub.get_pixel_rows = get_32bit_row; + break; + default: + ERREXIT(cinfo, JERR_BMP_BADDEPTH); + } + source->source_row = cinfo->image_height; + + /* And read the first row */ + return (*source->pub.get_pixel_rows) (cinfo, sinfo); +} + + +/* + * Read the file header; return image size and component count. + */ + +METHODDEF(void) +start_input_bmp (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + bmp_source_ptr source = (bmp_source_ptr) sinfo; + U_CHAR bmpfileheader[14]; + U_CHAR bmpinfoheader[64]; +#define GET_2B(array,offset) ((unsigned int) UCH(array[offset]) + \ + (((unsigned int) UCH(array[offset+1])) << 8)) +#define GET_4B(array,offset) ((INT32) UCH(array[offset]) + \ + (((INT32) UCH(array[offset+1])) << 8) + \ + (((INT32) UCH(array[offset+2])) << 16) + \ + (((INT32) UCH(array[offset+3])) << 24)) + INT32 bfOffBits; + INT32 headerSize; + INT32 biWidth; + INT32 biHeight; + unsigned int biPlanes; + INT32 biCompression; + INT32 biXPelsPerMeter,biYPelsPerMeter; + INT32 biClrUsed = 0; + int mapentrysize = 0; /* 0 indicates no colormap */ + INT32 bPad; + JDIMENSION row_width; + + /* Read and verify the bitmap file header */ + if (! ReadOK(source->pub.input_file, bmpfileheader, 14)) + ERREXIT(cinfo, JERR_INPUT_EOF); + if (GET_2B(bmpfileheader,0) != 0x4D42) /* 'BM' */ + ERREXIT(cinfo, JERR_BMP_NOT); + bfOffBits = (INT32) GET_4B(bmpfileheader,10); + /* We ignore the remaining fileheader fields */ + + /* The infoheader might be 12 bytes (OS/2 1.x), 40 bytes (Windows), + * or 64 bytes (OS/2 2.x). Check the first 4 bytes to find out which. + */ + if (! ReadOK(source->pub.input_file, bmpinfoheader, 4)) + ERREXIT(cinfo, JERR_INPUT_EOF); + headerSize = (INT32) GET_4B(bmpinfoheader,0); + if (headerSize < 12 || headerSize > 64) + ERREXIT(cinfo, JERR_BMP_BADHEADER); + if (! ReadOK(source->pub.input_file, bmpinfoheader+4, headerSize-4)) + ERREXIT(cinfo, JERR_INPUT_EOF); + + switch ((int) headerSize) { + case 12: + /* Decode OS/2 1.x header (Microsoft calls this a BITMAPCOREHEADER) */ + biWidth = (INT32) GET_2B(bmpinfoheader,4); + biHeight = (INT32) GET_2B(bmpinfoheader,6); + biPlanes = GET_2B(bmpinfoheader,8); + source->bits_per_pixel = (int) GET_2B(bmpinfoheader,10); + + switch (source->bits_per_pixel) { + case 8: /* colormapped image */ + mapentrysize = 3; /* OS/2 uses RGBTRIPLE colormap */ + TRACEMS2(cinfo, 1, JTRC_BMP_OS2_MAPPED, (int) biWidth, (int) biHeight); + break; + case 24: /* RGB image */ + TRACEMS2(cinfo, 1, JTRC_BMP_OS2, (int) biWidth, (int) biHeight); + break; + default: + ERREXIT(cinfo, JERR_BMP_BADDEPTH); + break; + } + break; + case 40: + case 64: + /* Decode Windows 3.x header (Microsoft calls this a BITMAPINFOHEADER) */ + /* or OS/2 2.x header, which has additional fields that we ignore */ + biWidth = GET_4B(bmpinfoheader,4); + biHeight = GET_4B(bmpinfoheader,8); + biPlanes = GET_2B(bmpinfoheader,12); + source->bits_per_pixel = (int) GET_2B(bmpinfoheader,14); + biCompression = GET_4B(bmpinfoheader,16); + biXPelsPerMeter = GET_4B(bmpinfoheader,24); + biYPelsPerMeter = GET_4B(bmpinfoheader,28); + biClrUsed = GET_4B(bmpinfoheader,32); + /* biSizeImage, biClrImportant fields are ignored */ + + switch (source->bits_per_pixel) { + case 8: /* colormapped image */ + mapentrysize = 4; /* Windows uses RGBQUAD colormap */ + TRACEMS2(cinfo, 1, JTRC_BMP_MAPPED, (int) biWidth, (int) biHeight); + break; + case 24: /* RGB image */ + TRACEMS2(cinfo, 1, JTRC_BMP, (int) biWidth, (int) biHeight); + break; + case 32: /* RGB image + Alpha channel */ + TRACEMS2(cinfo, 1, JTRC_BMP, (int) biWidth, (int) biHeight); + break; + default: + ERREXIT(cinfo, JERR_BMP_BADDEPTH); + break; + } + if (biCompression != 0) + ERREXIT(cinfo, JERR_BMP_COMPRESSED); + + if (biXPelsPerMeter > 0 && biYPelsPerMeter > 0) { + /* Set JFIF density parameters from the BMP data */ + cinfo->X_density = (UINT16) (biXPelsPerMeter/100); /* 100 cm per meter */ + cinfo->Y_density = (UINT16) (biYPelsPerMeter/100); + cinfo->density_unit = 2; /* dots/cm */ + } + break; + default: + ERREXIT(cinfo, JERR_BMP_BADHEADER); + return; + } + + if (biWidth <= 0 || biHeight <= 0) + ERREXIT(cinfo, JERR_BMP_EMPTY); + if (biPlanes != 1) + ERREXIT(cinfo, JERR_BMP_BADPLANES); + + /* Compute distance to bitmap data --- will adjust for colormap below */ + bPad = bfOffBits - (headerSize + 14); + + /* Read the colormap, if any */ + if (mapentrysize > 0) { + if (biClrUsed <= 0) + biClrUsed = 256; /* assume it's 256 */ + else if (biClrUsed > 256) + ERREXIT(cinfo, JERR_BMP_BADCMAP); + /* Allocate space to store the colormap */ + source->colormap = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (JDIMENSION) biClrUsed, (JDIMENSION) 3); + /* and read it from the file */ + read_colormap(source, (int) biClrUsed, mapentrysize); + /* account for size of colormap */ + bPad -= biClrUsed * mapentrysize; + } + + /* Skip any remaining pad bytes */ + if (bPad < 0) /* incorrect bfOffBits value? */ + ERREXIT(cinfo, JERR_BMP_BADHEADER); + while (--bPad >= 0) { + (void) read_byte(source); + } + + /* Compute row width in file, including padding to 4-byte boundary */ + if (source->bits_per_pixel == 24) + row_width = (JDIMENSION) (biWidth * 3); + else if (source->bits_per_pixel == 32) + row_width = (JDIMENSION) (biWidth * 4); + else + row_width = (JDIMENSION) biWidth; + while ((row_width & 3) != 0) row_width++; + source->row_width = row_width; + + /* Allocate space for inversion array, prepare for preload pass */ + source->whole_image = (*cinfo->mem->request_virt_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, + row_width, (JDIMENSION) biHeight, (JDIMENSION) 1); + source->pub.get_pixel_rows = preload_image; + if (cinfo->progress != NULL) { + cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; + progress->total_extra_passes++; /* count file input as separate pass */ + } + + /* Allocate one-row buffer for returned data */ + source->pub.buffer = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (JDIMENSION) (biWidth * 3), (JDIMENSION) 1); + source->pub.buffer_height = 1; + + cinfo->in_color_space = JCS_RGB; + cinfo->input_components = 3; + cinfo->data_precision = 8; + cinfo->image_width = (JDIMENSION) biWidth; + cinfo->image_height = (JDIMENSION) biHeight; +} + + +/* + * Finish up at the end of the file. + */ + +METHODDEF(void) +finish_input_bmp (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + /* no work */ +} + + +/* + * The module selection routine for BMP format input. + */ + +GLOBAL(cjpeg_source_ptr) +jinit_read_bmp (j_compress_ptr cinfo) +{ + bmp_source_ptr source; + + /* Create module interface object */ + source = (bmp_source_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(bmp_source_struct)); + source->cinfo = cinfo; /* make back link for subroutines */ + /* Fill in method ptrs, except get_pixel_rows which start_input sets */ + source->pub.start_input = start_input_bmp; + source->pub.finish_input = finish_input_bmp; + + return (cjpeg_source_ptr) source; +} + +#endif /* BMP_SUPPORTED */ diff --git a/compat/libjpeg/rdcolmap.c b/compat/libjpeg/rdcolmap.c new file mode 100755 index 0000000..eebf834 --- /dev/null +++ b/compat/libjpeg/rdcolmap.c @@ -0,0 +1,253 @@ +/* + * rdcolmap.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file implements djpeg's "-map file" switch. It reads a source image + * and constructs a colormap to be supplied to the JPEG decompressor. + * + * Currently, these file formats are supported for the map file: + * GIF: the contents of the GIF's global colormap are used. + * PPM (either text or raw flavor): the entire file is read and + * each unique pixel value is entered in the map. + * Note that reading a large PPM file will be horrendously slow. + * Typically, a PPM-format map file should contain just one pixel + * of each desired color. Such a file can be extracted from an + * ordinary image PPM file with ppmtomap(1). + * + * Rescaling a PPM that has a maxval unequal to MAXJSAMPLE is not + * currently implemented. + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ + +#ifdef QUANT_2PASS_SUPPORTED /* otherwise can't quantize to supplied map */ + +/* Portions of this code are based on the PBMPLUS library, which is: +** +** Copyright (C) 1988 by Jef Poskanzer. +** +** Permission to use, copy, modify, and distribute this software and its +** documentation for any purpose and without fee is hereby granted, provided +** that the above copyright notice appear in all copies and that both that +** copyright notice and this permission notice appear in supporting +** documentation. This software is provided "as is" without express or +** implied warranty. +*/ + + +/* + * Add a (potentially) new color to the color map. + */ + +LOCAL(void) +add_map_entry (j_decompress_ptr cinfo, int R, int G, int B) +{ + JSAMPROW colormap0 = cinfo->colormap[0]; + JSAMPROW colormap1 = cinfo->colormap[1]; + JSAMPROW colormap2 = cinfo->colormap[2]; + int ncolors = cinfo->actual_number_of_colors; + int index; + + /* Check for duplicate color. */ + for (index = 0; index < ncolors; index++) { + if (GETJSAMPLE(colormap0[index]) == R && + GETJSAMPLE(colormap1[index]) == G && + GETJSAMPLE(colormap2[index]) == B) + return; /* color is already in map */ + } + + /* Check for map overflow. */ + if (ncolors >= (MAXJSAMPLE+1)) + ERREXIT1(cinfo, JERR_QUANT_MANY_COLORS, (MAXJSAMPLE+1)); + + /* OK, add color to map. */ + colormap0[ncolors] = (JSAMPLE) R; + colormap1[ncolors] = (JSAMPLE) G; + colormap2[ncolors] = (JSAMPLE) B; + cinfo->actual_number_of_colors++; +} + + +/* + * Extract color map from a GIF file. + */ + +LOCAL(void) +read_gif_map (j_decompress_ptr cinfo, FILE * infile) +{ + int header[13]; + int i, colormaplen; + int R, G, B; + + /* Initial 'G' has already been read by read_color_map */ + /* Read the rest of the GIF header and logical screen descriptor */ + for (i = 1; i < 13; i++) { + if ((header[i] = getc(infile)) == EOF) + ERREXIT(cinfo, JERR_BAD_CMAP_FILE); + } + + /* Verify GIF Header */ + if (header[1] != 'I' || header[2] != 'F') + ERREXIT(cinfo, JERR_BAD_CMAP_FILE); + + /* There must be a global color map. */ + if ((header[10] & 0x80) == 0) + ERREXIT(cinfo, JERR_BAD_CMAP_FILE); + + /* OK, fetch it. */ + colormaplen = 2 << (header[10] & 0x07); + + for (i = 0; i < colormaplen; i++) { + R = getc(infile); + G = getc(infile); + B = getc(infile); + if (R == EOF || G == EOF || B == EOF) + ERREXIT(cinfo, JERR_BAD_CMAP_FILE); + add_map_entry(cinfo, + R << (BITS_IN_JSAMPLE-8), + G << (BITS_IN_JSAMPLE-8), + B << (BITS_IN_JSAMPLE-8)); + } +} + + +/* Support routines for reading PPM */ + + +LOCAL(int) +pbm_getc (FILE * infile) +/* Read next char, skipping over any comments */ +/* A comment/newline sequence is returned as a newline */ +{ + register int ch; + + ch = getc(infile); + if (ch == '#') { + do { + ch = getc(infile); + } while (ch != '\n' && ch != EOF); + } + return ch; +} + + +LOCAL(unsigned int) +read_pbm_integer (j_decompress_ptr cinfo, FILE * infile) +/* Read an unsigned decimal integer from the PPM file */ +/* Swallows one trailing character after the integer */ +/* Note that on a 16-bit-int machine, only values up to 64k can be read. */ +/* This should not be a problem in practice. */ +{ + register int ch; + register unsigned int val; + + /* Skip any leading whitespace */ + do { + ch = pbm_getc(infile); + if (ch == EOF) + ERREXIT(cinfo, JERR_BAD_CMAP_FILE); + } while (ch == ' ' || ch == '\t' || ch == '\n' || ch == '\r'); + + if (ch < '0' || ch > '9') + ERREXIT(cinfo, JERR_BAD_CMAP_FILE); + + val = ch - '0'; + while ((ch = pbm_getc(infile)) >= '0' && ch <= '9') { + val *= 10; + val += ch - '0'; + } + return val; +} + + +/* + * Extract color map from a PPM file. + */ + +LOCAL(void) +read_ppm_map (j_decompress_ptr cinfo, FILE * infile) +{ + int c; + unsigned int w, h, maxval, row, col; + int R, G, B; + + /* Initial 'P' has already been read by read_color_map */ + c = getc(infile); /* save format discriminator for a sec */ + + /* while we fetch the remaining header info */ + w = read_pbm_integer(cinfo, infile); + h = read_pbm_integer(cinfo, infile); + maxval = read_pbm_integer(cinfo, infile); + + if (w <= 0 || h <= 0 || maxval <= 0) /* error check */ + ERREXIT(cinfo, JERR_BAD_CMAP_FILE); + + /* For now, we don't support rescaling from an unusual maxval. */ + if (maxval != (unsigned int) MAXJSAMPLE) + ERREXIT(cinfo, JERR_BAD_CMAP_FILE); + + switch (c) { + case '3': /* it's a text-format PPM file */ + for (row = 0; row < h; row++) { + for (col = 0; col < w; col++) { + R = read_pbm_integer(cinfo, infile); + G = read_pbm_integer(cinfo, infile); + B = read_pbm_integer(cinfo, infile); + add_map_entry(cinfo, R, G, B); + } + } + break; + + case '6': /* it's a raw-format PPM file */ + for (row = 0; row < h; row++) { + for (col = 0; col < w; col++) { + R = getc(infile); + G = getc(infile); + B = getc(infile); + if (R == EOF || G == EOF || B == EOF) + ERREXIT(cinfo, JERR_BAD_CMAP_FILE); + add_map_entry(cinfo, R, G, B); + } + } + break; + + default: + ERREXIT(cinfo, JERR_BAD_CMAP_FILE); + break; + } +} + + +/* + * Main entry point from djpeg.c. + * Input: opened input file (from file name argument on command line). + * Output: colormap and actual_number_of_colors fields are set in cinfo. + */ + +GLOBAL(void) +read_color_map (j_decompress_ptr cinfo, FILE * infile) +{ + /* Allocate space for a color map of maximum supported size. */ + cinfo->colormap = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (JDIMENSION) (MAXJSAMPLE+1), (JDIMENSION) 3); + cinfo->actual_number_of_colors = 0; /* initialize map to empty */ + + /* Read first byte to determine file format */ + switch (getc(infile)) { + case 'G': + read_gif_map(cinfo, infile); + break; + case 'P': + read_ppm_map(cinfo, infile); + break; + default: + ERREXIT(cinfo, JERR_BAD_CMAP_FILE); + break; + } +} + +#endif /* QUANT_2PASS_SUPPORTED */ diff --git a/compat/libjpeg/rdgif.c b/compat/libjpeg/rdgif.c new file mode 100755 index 0000000..b0757e7 --- /dev/null +++ b/compat/libjpeg/rdgif.c @@ -0,0 +1,38 @@ +/* + * rdgif.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to read input images in GIF format. + * + ***************************************************************************** + * NOTE: to avoid entanglements with Unisys' patent on LZW compression, * + * the ability to read GIF files has been removed from the IJG distribution. * + * Sorry about that. * + ***************************************************************************** + * + * We are required to state that + * "The Graphics Interchange Format(c) is the Copyright property of + * CompuServe Incorporated. GIF(sm) is a Service Mark property of + * CompuServe Incorporated." + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ + +#ifdef GIF_SUPPORTED + +/* + * The module selection routine for GIF format input. + */ + +GLOBAL(cjpeg_source_ptr) +jinit_read_gif (j_compress_ptr cinfo) +{ + fprintf(stderr, "GIF input is unsupported for legal reasons. Sorry.\n"); + exit(EXIT_FAILURE); + return NULL; /* keep compiler happy */ +} + +#endif /* GIF_SUPPORTED */ diff --git a/compat/libjpeg/rdjpgcom.1 b/compat/libjpeg/rdjpgcom.1 new file mode 100755 index 0000000..678495d --- /dev/null +++ b/compat/libjpeg/rdjpgcom.1 @@ -0,0 +1,63 @@ +.TH RDJPGCOM 1 "13 September 2013" +.SH NAME +rdjpgcom \- display text comments from a JPEG file +.SH SYNOPSIS +.B rdjpgcom +[ +.B \-raw +] +[ +.B \-verbose +] +[ +.I filename +] +.LP +.SH DESCRIPTION +.LP +.B rdjpgcom +reads the named JPEG/JFIF file, or the standard input if no file is named, +and prints any text comments found in the file on the standard output. +.PP +The JPEG standard allows "comment" (COM) blocks to occur within a JPEG file. +Although the standard doesn't actually define what COM blocks are for, they +are widely used to hold user-supplied text strings. This lets you add +annotations, titles, index terms, etc to your JPEG files, and later retrieve +them as text. COM blocks do not interfere with the image stored in the JPEG +file. The maximum size of a COM block is 64K, but you can have as many of +them as you like in one JPEG file. +.SH OPTIONS +.TP +.B \-raw +Normally +.B rdjpgcom +escapes non-printable characters in comments, for security reasons. +This option avoids that. +.PP +.B \-verbose +Causes +.B rdjpgcom +to also display the JPEG image dimensions. +.PP +Switch names may be abbreviated, and are not case sensitive. +.SH HINTS +.B rdjpgcom +does not depend on the IJG JPEG library. Its source code is intended as an +illustration of the minimum amount of code required to parse a JPEG file +header correctly. +.PP +In +.B \-verbose +mode, +.B rdjpgcom +will also attempt to print the contents of any "APP12" markers as text. +Some digital cameras produce APP12 markers containing useful textual +information. If you like, you can modify the source code to print +other APPn marker types as well. +.SH SEE ALSO +.BR cjpeg (1), +.BR djpeg (1), +.BR jpegtran (1), +.BR wrjpgcom (1) +.SH AUTHOR +Independent JPEG Group diff --git a/compat/libjpeg/rdjpgcom.c b/compat/libjpeg/rdjpgcom.c new file mode 100755 index 0000000..ab09b44 --- /dev/null +++ b/compat/libjpeg/rdjpgcom.c @@ -0,0 +1,515 @@ +/* + * rdjpgcom.c + * + * Copyright (C) 1994-1997, Thomas G. Lane. + * Modified 2009 by Bill Allombert, Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a very simple stand-alone application that displays + * the text in COM (comment) markers in a JFIF file. + * This may be useful as an example of the minimum logic needed to parse + * JPEG markers. + */ + +#define JPEG_CJPEG_DJPEG /* to get the command-line config symbols */ +#include "jinclude.h" /* get auto-config symbols, */ + +#ifdef HAVE_LOCALE_H +#include /* Bill Allombert: use locale for isprint */ +#endif +#include /* to declare isupper(), tolower() */ +#ifdef USE_SETMODE +#include /* to declare setmode()'s parameter macros */ +/* If you have setmode() but not , just delete this line: */ +#include /* to declare setmode() */ +#endif + +#ifdef USE_CCOMMAND /* command-line reader for Macintosh */ +#ifdef __MWERKS__ +#include /* Metrowerks needs this */ +#include /* ... and this */ +#endif +#ifdef THINK_C +#include /* Think declares it here */ +#endif +#endif + +#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */ +#define READ_BINARY "r" +#else +#ifdef VMS /* VMS is very nonstandard */ +#define READ_BINARY "rb", "ctx=stm" +#else /* standard ANSI-compliant case */ +#define READ_BINARY "rb" +#endif +#endif + +#ifndef EXIT_FAILURE /* define exit() codes if not provided */ +#define EXIT_FAILURE 1 +#endif +#ifndef EXIT_SUCCESS +#ifdef VMS +#define EXIT_SUCCESS 1 /* VMS is very nonstandard */ +#else +#define EXIT_SUCCESS 0 +#endif +#endif + + +/* + * These macros are used to read the input file. + * To reuse this code in another application, you might need to change these. + */ + +static FILE * infile; /* input JPEG file */ + +/* Return next input byte, or EOF if no more */ +#define NEXTBYTE() getc(infile) + + +/* Error exit handler */ +#define ERREXIT(msg) (fprintf(stderr, "%s\n", msg), exit(EXIT_FAILURE)) + + +/* Read one byte, testing for EOF */ +static int +read_1_byte (void) +{ + int c; + + c = NEXTBYTE(); + if (c == EOF) + ERREXIT("Premature EOF in JPEG file"); + return c; +} + +/* Read 2 bytes, convert to unsigned int */ +/* All 2-byte quantities in JPEG markers are MSB first */ +static unsigned int +read_2_bytes (void) +{ + int c1, c2; + + c1 = NEXTBYTE(); + if (c1 == EOF) + ERREXIT("Premature EOF in JPEG file"); + c2 = NEXTBYTE(); + if (c2 == EOF) + ERREXIT("Premature EOF in JPEG file"); + return (((unsigned int) c1) << 8) + ((unsigned int) c2); +} + + +/* + * JPEG markers consist of one or more 0xFF bytes, followed by a marker + * code byte (which is not an FF). Here are the marker codes of interest + * in this program. (See jdmarker.c for a more complete list.) + */ + +#define M_SOF0 0xC0 /* Start Of Frame N */ +#define M_SOF1 0xC1 /* N indicates which compression process */ +#define M_SOF2 0xC2 /* Only SOF0-SOF2 are now in common use */ +#define M_SOF3 0xC3 +#define M_SOF5 0xC5 /* NB: codes C4 and CC are NOT SOF markers */ +#define M_SOF6 0xC6 +#define M_SOF7 0xC7 +#define M_SOF9 0xC9 +#define M_SOF10 0xCA +#define M_SOF11 0xCB +#define M_SOF13 0xCD +#define M_SOF14 0xCE +#define M_SOF15 0xCF +#define M_SOI 0xD8 /* Start Of Image (beginning of datastream) */ +#define M_EOI 0xD9 /* End Of Image (end of datastream) */ +#define M_SOS 0xDA /* Start Of Scan (begins compressed data) */ +#define M_APP0 0xE0 /* Application-specific marker, type N */ +#define M_APP12 0xEC /* (we don't bother to list all 16 APPn's) */ +#define M_COM 0xFE /* COMment */ + + +/* + * Find the next JPEG marker and return its marker code. + * We expect at least one FF byte, possibly more if the compressor used FFs + * to pad the file. + * There could also be non-FF garbage between markers. The treatment of such + * garbage is unspecified; we choose to skip over it but emit a warning msg. + * NB: this routine must not be used after seeing SOS marker, since it will + * not deal correctly with FF/00 sequences in the compressed image data... + */ + +static int +next_marker (void) +{ + int c; + int discarded_bytes = 0; + + /* Find 0xFF byte; count and skip any non-FFs. */ + c = read_1_byte(); + while (c != 0xFF) { + discarded_bytes++; + c = read_1_byte(); + } + /* Get marker code byte, swallowing any duplicate FF bytes. Extra FFs + * are legal as pad bytes, so don't count them in discarded_bytes. + */ + do { + c = read_1_byte(); + } while (c == 0xFF); + + if (discarded_bytes != 0) { + fprintf(stderr, "Warning: garbage data found in JPEG file\n"); + } + + return c; +} + + +/* + * Read the initial marker, which should be SOI. + * For a JFIF file, the first two bytes of the file should be literally + * 0xFF M_SOI. To be more general, we could use next_marker, but if the + * input file weren't actually JPEG at all, next_marker might read the whole + * file and then return a misleading error message... + */ + +static int +first_marker (void) +{ + int c1, c2; + + c1 = NEXTBYTE(); + c2 = NEXTBYTE(); + if (c1 != 0xFF || c2 != M_SOI) + ERREXIT("Not a JPEG file"); + return c2; +} + + +/* + * Most types of marker are followed by a variable-length parameter segment. + * This routine skips over the parameters for any marker we don't otherwise + * want to process. + * Note that we MUST skip the parameter segment explicitly in order not to + * be fooled by 0xFF bytes that might appear within the parameter segment; + * such bytes do NOT introduce new markers. + */ + +static void +skip_variable (void) +/* Skip over an unknown or uninteresting variable-length marker */ +{ + unsigned int length; + + /* Get the marker parameter length count */ + length = read_2_bytes(); + /* Length includes itself, so must be at least 2 */ + if (length < 2) + ERREXIT("Erroneous JPEG marker length"); + length -= 2; + /* Skip over the remaining bytes */ + while (length > 0) { + (void) read_1_byte(); + length--; + } +} + + +/* + * Process a COM marker. + * We want to print out the marker contents as legible text; + * we must guard against non-text junk and varying newline representations. + */ + +static void +process_COM (int raw) +{ + unsigned int length; + int ch; + int lastch = 0; + + /* Bill Allombert: set locale properly for isprint */ +#ifdef HAVE_LOCALE_H + setlocale(LC_CTYPE, ""); +#endif + + /* Get the marker parameter length count */ + length = read_2_bytes(); + /* Length includes itself, so must be at least 2 */ + if (length < 2) + ERREXIT("Erroneous JPEG marker length"); + length -= 2; + + while (length > 0) { + ch = read_1_byte(); + if (raw) { + putc(ch, stdout); + /* Emit the character in a readable form. + * Nonprintables are converted to \nnn form, + * while \ is converted to \\. + * Newlines in CR, CR/LF, or LF form will be printed as one newline. + */ + } else if (ch == '\r') { + printf("\n"); + } else if (ch == '\n') { + if (lastch != '\r') + printf("\n"); + } else if (ch == '\\') { + printf("\\\\"); + } else if (isprint(ch)) { + putc(ch, stdout); + } else { + printf("\\%03o", ch); + } + lastch = ch; + length--; + } + printf("\n"); + + /* Bill Allombert: revert to C locale */ +#ifdef HAVE_LOCALE_H + setlocale(LC_CTYPE, "C"); +#endif +} + + +/* + * Process a SOFn marker. + * This code is only needed if you want to know the image dimensions... + */ + +static void +process_SOFn (int marker) +{ + unsigned int length; + unsigned int image_height, image_width; + int data_precision, num_components; + const char * process; + int ci; + + length = read_2_bytes(); /* usual parameter length count */ + + data_precision = read_1_byte(); + image_height = read_2_bytes(); + image_width = read_2_bytes(); + num_components = read_1_byte(); + + switch (marker) { + case M_SOF0: process = "Baseline"; break; + case M_SOF1: process = "Extended sequential"; break; + case M_SOF2: process = "Progressive"; break; + case M_SOF3: process = "Lossless"; break; + case M_SOF5: process = "Differential sequential"; break; + case M_SOF6: process = "Differential progressive"; break; + case M_SOF7: process = "Differential lossless"; break; + case M_SOF9: process = "Extended sequential, arithmetic coding"; break; + case M_SOF10: process = "Progressive, arithmetic coding"; break; + case M_SOF11: process = "Lossless, arithmetic coding"; break; + case M_SOF13: process = "Differential sequential, arithmetic coding"; break; + case M_SOF14: process = "Differential progressive, arithmetic coding"; break; + case M_SOF15: process = "Differential lossless, arithmetic coding"; break; + default: process = "Unknown"; break; + } + + printf("JPEG image is %uw * %uh, %d color components, %d bits per sample\n", + image_width, image_height, num_components, data_precision); + printf("JPEG process: %s\n", process); + + if (length != (unsigned int) (8 + num_components * 3)) + ERREXIT("Bogus SOF marker length"); + + for (ci = 0; ci < num_components; ci++) { + (void) read_1_byte(); /* Component ID code */ + (void) read_1_byte(); /* H, V sampling factors */ + (void) read_1_byte(); /* Quantization table number */ + } +} + + +/* + * Parse the marker stream until SOS or EOI is seen; + * display any COM markers. + * While the companion program wrjpgcom will always insert COM markers before + * SOFn, other implementations might not, so we scan to SOS before stopping. + * If we were only interested in the image dimensions, we would stop at SOFn. + * (Conversely, if we only cared about COM markers, there would be no need + * for special code to handle SOFn; we could treat it like other markers.) + */ + +static int +scan_JPEG_header (int verbose, int raw) +{ + int marker; + + /* Expect SOI at start of file */ + if (first_marker() != M_SOI) + ERREXIT("Expected SOI marker first"); + + /* Scan miscellaneous markers until we reach SOS. */ + for (;;) { + marker = next_marker(); + switch (marker) { + /* Note that marker codes 0xC4, 0xC8, 0xCC are not, and must not be, + * treated as SOFn. C4 in particular is actually DHT. + */ + case M_SOF0: /* Baseline */ + case M_SOF1: /* Extended sequential, Huffman */ + case M_SOF2: /* Progressive, Huffman */ + case M_SOF3: /* Lossless, Huffman */ + case M_SOF5: /* Differential sequential, Huffman */ + case M_SOF6: /* Differential progressive, Huffman */ + case M_SOF7: /* Differential lossless, Huffman */ + case M_SOF9: /* Extended sequential, arithmetic */ + case M_SOF10: /* Progressive, arithmetic */ + case M_SOF11: /* Lossless, arithmetic */ + case M_SOF13: /* Differential sequential, arithmetic */ + case M_SOF14: /* Differential progressive, arithmetic */ + case M_SOF15: /* Differential lossless, arithmetic */ + if (verbose) + process_SOFn(marker); + else + skip_variable(); + break; + + case M_SOS: /* stop before hitting compressed data */ + return marker; + + case M_EOI: /* in case it's a tables-only JPEG stream */ + return marker; + + case M_COM: + process_COM(raw); + break; + + case M_APP12: + /* Some digital camera makers put useful textual information into + * APP12 markers, so we print those out too when in -verbose mode. + */ + if (verbose) { + printf("APP12 contains:\n"); + process_COM(raw); + } else + skip_variable(); + break; + + default: /* Anything else just gets skipped */ + skip_variable(); /* we assume it has a parameter count... */ + break; + } + } /* end loop */ +} + + +/* Command line parsing code */ + +static const char * progname; /* program name for error messages */ + + +static void +usage (void) +/* complain about bad command line */ +{ + fprintf(stderr, "rdjpgcom displays any textual comments in a JPEG file.\n"); + + fprintf(stderr, "Usage: %s [switches] [inputfile]\n", progname); + + fprintf(stderr, "Switches (names may be abbreviated):\n"); + fprintf(stderr, " -raw Display non-printable characters in comments (unsafe)\n"); + fprintf(stderr, " -verbose Also display dimensions of JPEG image\n"); + + exit(EXIT_FAILURE); +} + + +static int +keymatch (char * arg, const char * keyword, int minchars) +/* Case-insensitive matching of (possibly abbreviated) keyword switches. */ +/* keyword is the constant keyword (must be lower case already), */ +/* minchars is length of minimum legal abbreviation. */ +{ + register int ca, ck; + register int nmatched = 0; + + while ((ca = *arg++) != '\0') { + if ((ck = *keyword++) == '\0') + return 0; /* arg longer than keyword, no good */ + if (isupper(ca)) /* force arg to lcase (assume ck is already) */ + ca = tolower(ca); + if (ca != ck) + return 0; /* no good */ + nmatched++; /* count matched characters */ + } + /* reached end of argument; fail if it's too short for unique abbrev */ + if (nmatched < minchars) + return 0; + return 1; /* A-OK */ +} + + +/* + * The main program. + */ + +int +main (int argc, char **argv) +{ + int argn; + char * arg; + int verbose = 0, raw = 0; + + /* On Mac, fetch a command line. */ +#ifdef USE_CCOMMAND + argc = ccommand(&argv); +#endif + + progname = argv[0]; + if (progname == NULL || progname[0] == 0) + progname = "rdjpgcom"; /* in case C library doesn't provide it */ + + /* Parse switches, if any */ + for (argn = 1; argn < argc; argn++) { + arg = argv[argn]; + if (arg[0] != '-') + break; /* not switch, must be file name */ + arg++; /* advance over '-' */ + if (keymatch(arg, "verbose", 1)) { + verbose++; + } else if (keymatch(arg, "raw", 1)) { + raw = 1; + } else + usage(); + } + + /* Open the input file. */ + /* Unix style: expect zero or one file name */ + if (argn < argc-1) { + fprintf(stderr, "%s: only one input file\n", progname); + usage(); + } + if (argn < argc) { + if ((infile = fopen(argv[argn], READ_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]); + exit(EXIT_FAILURE); + } + } else { + /* default input file is stdin */ +#ifdef USE_SETMODE /* need to hack file mode? */ + setmode(fileno(stdin), O_BINARY); +#endif +#ifdef USE_FDOPEN /* need to re-open in binary mode? */ + if ((infile = fdopen(fileno(stdin), READ_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open stdin\n", progname); + exit(EXIT_FAILURE); + } +#else + infile = stdin; +#endif + } + + /* Scan the JPEG headers. */ + (void) scan_JPEG_header(verbose, raw); + + /* All done. */ + exit(EXIT_SUCCESS); + return 0; /* suppress no-return-value warnings */ +} diff --git a/compat/libjpeg/rdppm.c b/compat/libjpeg/rdppm.c new file mode 100755 index 0000000..9dcd2dc --- /dev/null +++ b/compat/libjpeg/rdppm.c @@ -0,0 +1,459 @@ +/* + * rdppm.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 2009 by Bill Allombert, Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to read input images in PPM/PGM format. + * The extended 2-byte-per-sample raw PPM/PGM formats are supported. + * The PBMPLUS library is NOT required to compile this software + * (but it is highly useful as a set of PPM image manipulation programs). + * + * These routines may need modification for non-Unix environments or + * specialized applications. As they stand, they assume input from + * an ordinary stdio stream. They further assume that reading begins + * at the start of the file; start_input may need work if the + * user interface has already read some data (e.g., to determine that + * the file is indeed PPM format). + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ + +#ifdef PPM_SUPPORTED + + +/* Portions of this code are based on the PBMPLUS library, which is: +** +** Copyright (C) 1988 by Jef Poskanzer. +** +** Permission to use, copy, modify, and distribute this software and its +** documentation for any purpose and without fee is hereby granted, provided +** that the above copyright notice appear in all copies and that both that +** copyright notice and this permission notice appear in supporting +** documentation. This software is provided "as is" without express or +** implied warranty. +*/ + + +/* Macros to deal with unsigned chars as efficiently as compiler allows */ + +#ifdef HAVE_UNSIGNED_CHAR +typedef unsigned char U_CHAR; +#define UCH(x) ((int) (x)) +#else /* !HAVE_UNSIGNED_CHAR */ +#ifdef CHAR_IS_UNSIGNED +typedef char U_CHAR; +#define UCH(x) ((int) (x)) +#else +typedef char U_CHAR; +#define UCH(x) ((int) (x) & 0xFF) +#endif +#endif /* HAVE_UNSIGNED_CHAR */ + + +#define ReadOK(file,buffer,len) (JFREAD(file,buffer,len) == ((size_t) (len))) + + +/* + * On most systems, reading individual bytes with getc() is drastically less + * efficient than buffering a row at a time with fread(). On PCs, we must + * allocate the buffer in near data space, because we are assuming small-data + * memory model, wherein fread() can't reach far memory. If you need to + * process very wide images on a PC, you might have to compile in large-memory + * model, or else replace fread() with a getc() loop --- which will be much + * slower. + */ + + +/* Private version of data source object */ + +typedef struct { + struct cjpeg_source_struct pub; /* public fields */ + + U_CHAR *iobuffer; /* non-FAR pointer to I/O buffer */ + JSAMPROW pixrow; /* FAR pointer to same */ + size_t buffer_width; /* width of I/O buffer */ + JSAMPLE *rescale; /* => maxval-remapping array, or NULL */ +} ppm_source_struct; + +typedef ppm_source_struct * ppm_source_ptr; + + +LOCAL(int) +pbm_getc (FILE * infile) +/* Read next char, skipping over any comments */ +/* A comment/newline sequence is returned as a newline */ +{ + register int ch; + + ch = getc(infile); + if (ch == '#') { + do { + ch = getc(infile); + } while (ch != '\n' && ch != EOF); + } + return ch; +} + + +LOCAL(unsigned int) +read_pbm_integer (j_compress_ptr cinfo, FILE * infile) +/* Read an unsigned decimal integer from the PPM file */ +/* Swallows one trailing character after the integer */ +/* Note that on a 16-bit-int machine, only values up to 64k can be read. */ +/* This should not be a problem in practice. */ +{ + register int ch; + register unsigned int val; + + /* Skip any leading whitespace */ + do { + ch = pbm_getc(infile); + if (ch == EOF) + ERREXIT(cinfo, JERR_INPUT_EOF); + } while (ch == ' ' || ch == '\t' || ch == '\n' || ch == '\r'); + + if (ch < '0' || ch > '9') + ERREXIT(cinfo, JERR_PPM_NONNUMERIC); + + val = ch - '0'; + while ((ch = pbm_getc(infile)) >= '0' && ch <= '9') { + val *= 10; + val += ch - '0'; + } + return val; +} + + +/* + * Read one row of pixels. + * + * We provide several different versions depending on input file format. + * In all cases, input is scaled to the size of JSAMPLE. + * + * A really fast path is provided for reading byte/sample raw files with + * maxval = MAXJSAMPLE, which is the normal case for 8-bit data. + */ + + +METHODDEF(JDIMENSION) +get_text_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading text-format PGM files with any maxval */ +{ + ppm_source_ptr source = (ppm_source_ptr) sinfo; + FILE * infile = source->pub.input_file; + register JSAMPROW ptr; + register JSAMPLE *rescale = source->rescale; + JDIMENSION col; + + ptr = source->pub.buffer[0]; + for (col = cinfo->image_width; col > 0; col--) { + *ptr++ = rescale[read_pbm_integer(cinfo, infile)]; + } + return 1; +} + + +METHODDEF(JDIMENSION) +get_text_rgb_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading text-format PPM files with any maxval */ +{ + ppm_source_ptr source = (ppm_source_ptr) sinfo; + FILE * infile = source->pub.input_file; + register JSAMPROW ptr; + register JSAMPLE *rescale = source->rescale; + JDIMENSION col; + + ptr = source->pub.buffer[0]; + for (col = cinfo->image_width; col > 0; col--) { + *ptr++ = rescale[read_pbm_integer(cinfo, infile)]; + *ptr++ = rescale[read_pbm_integer(cinfo, infile)]; + *ptr++ = rescale[read_pbm_integer(cinfo, infile)]; + } + return 1; +} + + +METHODDEF(JDIMENSION) +get_scaled_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading raw-byte-format PGM files with any maxval */ +{ + ppm_source_ptr source = (ppm_source_ptr) sinfo; + register JSAMPROW ptr; + register U_CHAR * bufferptr; + register JSAMPLE *rescale = source->rescale; + JDIMENSION col; + + if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width)) + ERREXIT(cinfo, JERR_INPUT_EOF); + ptr = source->pub.buffer[0]; + bufferptr = source->iobuffer; + for (col = cinfo->image_width; col > 0; col--) { + *ptr++ = rescale[UCH(*bufferptr++)]; + } + return 1; +} + + +METHODDEF(JDIMENSION) +get_scaled_rgb_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading raw-byte-format PPM files with any maxval */ +{ + ppm_source_ptr source = (ppm_source_ptr) sinfo; + register JSAMPROW ptr; + register U_CHAR * bufferptr; + register JSAMPLE *rescale = source->rescale; + JDIMENSION col; + + if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width)) + ERREXIT(cinfo, JERR_INPUT_EOF); + ptr = source->pub.buffer[0]; + bufferptr = source->iobuffer; + for (col = cinfo->image_width; col > 0; col--) { + *ptr++ = rescale[UCH(*bufferptr++)]; + *ptr++ = rescale[UCH(*bufferptr++)]; + *ptr++ = rescale[UCH(*bufferptr++)]; + } + return 1; +} + + +METHODDEF(JDIMENSION) +get_raw_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading raw-byte-format files with maxval = MAXJSAMPLE. + * In this case we just read right into the JSAMPLE buffer! + * Note that same code works for PPM and PGM files. + */ +{ + ppm_source_ptr source = (ppm_source_ptr) sinfo; + + if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width)) + ERREXIT(cinfo, JERR_INPUT_EOF); + return 1; +} + + +METHODDEF(JDIMENSION) +get_word_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading raw-word-format PGM files with any maxval */ +{ + ppm_source_ptr source = (ppm_source_ptr) sinfo; + register JSAMPROW ptr; + register U_CHAR * bufferptr; + register JSAMPLE *rescale = source->rescale; + JDIMENSION col; + + if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width)) + ERREXIT(cinfo, JERR_INPUT_EOF); + ptr = source->pub.buffer[0]; + bufferptr = source->iobuffer; + for (col = cinfo->image_width; col > 0; col--) { + register int temp; + temp = UCH(*bufferptr++) << 8; + temp |= UCH(*bufferptr++); + *ptr++ = rescale[temp]; + } + return 1; +} + + +METHODDEF(JDIMENSION) +get_word_rgb_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading raw-word-format PPM files with any maxval */ +{ + ppm_source_ptr source = (ppm_source_ptr) sinfo; + register JSAMPROW ptr; + register U_CHAR * bufferptr; + register JSAMPLE *rescale = source->rescale; + JDIMENSION col; + + if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width)) + ERREXIT(cinfo, JERR_INPUT_EOF); + ptr = source->pub.buffer[0]; + bufferptr = source->iobuffer; + for (col = cinfo->image_width; col > 0; col--) { + register int temp; + temp = UCH(*bufferptr++) << 8; + temp |= UCH(*bufferptr++); + *ptr++ = rescale[temp]; + temp = UCH(*bufferptr++) << 8; + temp |= UCH(*bufferptr++); + *ptr++ = rescale[temp]; + temp = UCH(*bufferptr++) << 8; + temp |= UCH(*bufferptr++); + *ptr++ = rescale[temp]; + } + return 1; +} + + +/* + * Read the file header; return image size and component count. + */ + +METHODDEF(void) +start_input_ppm (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + ppm_source_ptr source = (ppm_source_ptr) sinfo; + int c; + unsigned int w, h, maxval; + boolean need_iobuffer, use_raw_buffer, need_rescale; + + if (getc(source->pub.input_file) != 'P') + ERREXIT(cinfo, JERR_PPM_NOT); + + c = getc(source->pub.input_file); /* subformat discriminator character */ + + /* detect unsupported variants (ie, PBM) before trying to read header */ + switch (c) { + case '2': /* it's a text-format PGM file */ + case '3': /* it's a text-format PPM file */ + case '5': /* it's a raw-format PGM file */ + case '6': /* it's a raw-format PPM file */ + break; + default: + ERREXIT(cinfo, JERR_PPM_NOT); + break; + } + + /* fetch the remaining header info */ + w = read_pbm_integer(cinfo, source->pub.input_file); + h = read_pbm_integer(cinfo, source->pub.input_file); + maxval = read_pbm_integer(cinfo, source->pub.input_file); + + if (w <= 0 || h <= 0 || maxval <= 0) /* error check */ + ERREXIT(cinfo, JERR_PPM_NOT); + + cinfo->data_precision = BITS_IN_JSAMPLE; /* we always rescale data to this */ + cinfo->image_width = (JDIMENSION) w; + cinfo->image_height = (JDIMENSION) h; + + /* initialize flags to most common settings */ + need_iobuffer = TRUE; /* do we need an I/O buffer? */ + use_raw_buffer = FALSE; /* do we map input buffer onto I/O buffer? */ + need_rescale = TRUE; /* do we need a rescale array? */ + + switch (c) { + case '2': /* it's a text-format PGM file */ + cinfo->input_components = 1; + cinfo->in_color_space = JCS_GRAYSCALE; + TRACEMS2(cinfo, 1, JTRC_PGM_TEXT, w, h); + source->pub.get_pixel_rows = get_text_gray_row; + need_iobuffer = FALSE; + break; + + case '3': /* it's a text-format PPM file */ + cinfo->input_components = 3; + cinfo->in_color_space = JCS_RGB; + TRACEMS2(cinfo, 1, JTRC_PPM_TEXT, w, h); + source->pub.get_pixel_rows = get_text_rgb_row; + need_iobuffer = FALSE; + break; + + case '5': /* it's a raw-format PGM file */ + cinfo->input_components = 1; + cinfo->in_color_space = JCS_GRAYSCALE; + TRACEMS2(cinfo, 1, JTRC_PGM, w, h); + if (maxval > 255) { + source->pub.get_pixel_rows = get_word_gray_row; + } else if (maxval == MAXJSAMPLE && SIZEOF(JSAMPLE) == SIZEOF(U_CHAR)) { + source->pub.get_pixel_rows = get_raw_row; + use_raw_buffer = TRUE; + need_rescale = FALSE; + } else { + source->pub.get_pixel_rows = get_scaled_gray_row; + } + break; + + case '6': /* it's a raw-format PPM file */ + cinfo->input_components = 3; + cinfo->in_color_space = JCS_RGB; + TRACEMS2(cinfo, 1, JTRC_PPM, w, h); + if (maxval > 255) { + source->pub.get_pixel_rows = get_word_rgb_row; + } else if (maxval == MAXJSAMPLE && SIZEOF(JSAMPLE) == SIZEOF(U_CHAR)) { + source->pub.get_pixel_rows = get_raw_row; + use_raw_buffer = TRUE; + need_rescale = FALSE; + } else { + source->pub.get_pixel_rows = get_scaled_rgb_row; + } + break; + } + + /* Allocate space for I/O buffer: 1 or 3 bytes or words/pixel. */ + if (need_iobuffer) { + source->buffer_width = (size_t) w * cinfo->input_components * + ((maxval<=255) ? SIZEOF(U_CHAR) : (2*SIZEOF(U_CHAR))); + source->iobuffer = (U_CHAR *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + source->buffer_width); + } + + /* Create compressor input buffer. */ + if (use_raw_buffer) { + /* For unscaled raw-input case, we can just map it onto the I/O buffer. */ + /* Synthesize a JSAMPARRAY pointer structure */ + /* Cast here implies near->far pointer conversion on PCs */ + source->pixrow = (JSAMPROW) source->iobuffer; + source->pub.buffer = & source->pixrow; + source->pub.buffer_height = 1; + } else { + /* Need to translate anyway, so make a separate sample buffer. */ + source->pub.buffer = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (JDIMENSION) w * cinfo->input_components, (JDIMENSION) 1); + source->pub.buffer_height = 1; + } + + /* Compute the rescaling array if required. */ + if (need_rescale) { + INT32 val, half_maxval; + + /* On 16-bit-int machines we have to be careful of maxval = 65535 */ + source->rescale = (JSAMPLE *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (size_t) (((long) maxval + 1L) * SIZEOF(JSAMPLE))); + half_maxval = maxval / 2; + for (val = 0; val <= (INT32) maxval; val++) { + /* The multiplication here must be done in 32 bits to avoid overflow */ + source->rescale[val] = (JSAMPLE) ((val*MAXJSAMPLE + half_maxval)/maxval); + } + } +} + + +/* + * Finish up at the end of the file. + */ + +METHODDEF(void) +finish_input_ppm (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + /* no work */ +} + + +/* + * The module selection routine for PPM format input. + */ + +GLOBAL(cjpeg_source_ptr) +jinit_read_ppm (j_compress_ptr cinfo) +{ + ppm_source_ptr source; + + /* Create module interface object */ + source = (ppm_source_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(ppm_source_struct)); + /* Fill in method ptrs, except get_pixel_rows which start_input sets */ + source->pub.start_input = start_input_ppm; + source->pub.finish_input = finish_input_ppm; + + return (cjpeg_source_ptr) source; +} + +#endif /* PPM_SUPPORTED */ diff --git a/compat/libjpeg/rdrle.c b/compat/libjpeg/rdrle.c new file mode 100755 index 0000000..df871e0 --- /dev/null +++ b/compat/libjpeg/rdrle.c @@ -0,0 +1,387 @@ +/* + * rdrle.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to read input images in Utah RLE format. + * The Utah Raster Toolkit library is required (version 3.1 or later). + * + * These routines may need modification for non-Unix environments or + * specialized applications. As they stand, they assume input from + * an ordinary stdio stream. They further assume that reading begins + * at the start of the file; start_input may need work if the + * user interface has already read some data (e.g., to determine that + * the file is indeed RLE format). + * + * Based on code contributed by Mike Lijewski, + * with updates from Robert Hutchinson. + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ + +#ifdef RLE_SUPPORTED + +/* rle.h is provided by the Utah Raster Toolkit. */ + +#include + +/* + * We assume that JSAMPLE has the same representation as rle_pixel, + * to wit, "unsigned char". Hence we can't cope with 12- or 16-bit samples. + */ + +#if BITS_IN_JSAMPLE != 8 + Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */ +#endif + +/* + * We support the following types of RLE files: + * + * GRAYSCALE - 8 bits, no colormap + * MAPPEDGRAY - 8 bits, 1 channel colomap + * PSEUDOCOLOR - 8 bits, 3 channel colormap + * TRUECOLOR - 24 bits, 3 channel colormap + * DIRECTCOLOR - 24 bits, no colormap + * + * For now, we ignore any alpha channel in the image. + */ + +typedef enum + { GRAYSCALE, MAPPEDGRAY, PSEUDOCOLOR, TRUECOLOR, DIRECTCOLOR } rle_kind; + + +/* + * Since RLE stores scanlines bottom-to-top, we have to invert the image + * to conform to JPEG's top-to-bottom order. To do this, we read the + * incoming image into a virtual array on the first get_pixel_rows call, + * then fetch the required row from the virtual array on subsequent calls. + */ + +typedef struct _rle_source_struct * rle_source_ptr; + +typedef struct _rle_source_struct { + struct cjpeg_source_struct pub; /* public fields */ + + rle_kind visual; /* actual type of input file */ + jvirt_sarray_ptr image; /* virtual array to hold the image */ + JDIMENSION row; /* current row # in the virtual array */ + rle_hdr header; /* Input file information */ + rle_pixel** rle_row; /* holds a row returned by rle_getrow() */ + +} rle_source_struct; + + +/* + * Read the file header; return image size and component count. + */ + +METHODDEF(void) +start_input_rle (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + rle_source_ptr source = (rle_source_ptr) sinfo; + JDIMENSION width, height; +#ifdef PROGRESS_REPORT + cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; +#endif + + /* Use RLE library routine to get the header info */ + source->header = *rle_hdr_init(NULL); + source->header.rle_file = source->pub.input_file; + switch (rle_get_setup(&(source->header))) { + case RLE_SUCCESS: + /* A-OK */ + break; + case RLE_NOT_RLE: + ERREXIT(cinfo, JERR_RLE_NOT); + break; + case RLE_NO_SPACE: + ERREXIT(cinfo, JERR_RLE_MEM); + break; + case RLE_EMPTY: + ERREXIT(cinfo, JERR_RLE_EMPTY); + break; + case RLE_EOF: + ERREXIT(cinfo, JERR_RLE_EOF); + break; + default: + ERREXIT(cinfo, JERR_RLE_BADERROR); + break; + } + + /* Figure out what we have, set private vars and return values accordingly */ + + width = source->header.xmax - source->header.xmin + 1; + height = source->header.ymax - source->header.ymin + 1; + source->header.xmin = 0; /* realign horizontally */ + source->header.xmax = width-1; + + cinfo->image_width = width; + cinfo->image_height = height; + cinfo->data_precision = 8; /* we can only handle 8 bit data */ + + if (source->header.ncolors == 1 && source->header.ncmap == 0) { + source->visual = GRAYSCALE; + TRACEMS2(cinfo, 1, JTRC_RLE_GRAY, width, height); + } else if (source->header.ncolors == 1 && source->header.ncmap == 1) { + source->visual = MAPPEDGRAY; + TRACEMS3(cinfo, 1, JTRC_RLE_MAPGRAY, width, height, + 1 << source->header.cmaplen); + } else if (source->header.ncolors == 1 && source->header.ncmap == 3) { + source->visual = PSEUDOCOLOR; + TRACEMS3(cinfo, 1, JTRC_RLE_MAPPED, width, height, + 1 << source->header.cmaplen); + } else if (source->header.ncolors == 3 && source->header.ncmap == 3) { + source->visual = TRUECOLOR; + TRACEMS3(cinfo, 1, JTRC_RLE_FULLMAP, width, height, + 1 << source->header.cmaplen); + } else if (source->header.ncolors == 3 && source->header.ncmap == 0) { + source->visual = DIRECTCOLOR; + TRACEMS2(cinfo, 1, JTRC_RLE, width, height); + } else + ERREXIT(cinfo, JERR_RLE_UNSUPPORTED); + + if (source->visual == GRAYSCALE || source->visual == MAPPEDGRAY) { + cinfo->in_color_space = JCS_GRAYSCALE; + cinfo->input_components = 1; + } else { + cinfo->in_color_space = JCS_RGB; + cinfo->input_components = 3; + } + + /* + * A place to hold each scanline while it's converted. + * (GRAYSCALE scanlines don't need converting) + */ + if (source->visual != GRAYSCALE) { + source->rle_row = (rle_pixel**) (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (JDIMENSION) width, (JDIMENSION) cinfo->input_components); + } + + /* request a virtual array to hold the image */ + source->image = (*cinfo->mem->request_virt_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, + (JDIMENSION) (width * source->header.ncolors), + (JDIMENSION) height, (JDIMENSION) 1); + +#ifdef PROGRESS_REPORT + if (progress != NULL) { + /* count file input as separate pass */ + progress->total_extra_passes++; + } +#endif + + source->pub.buffer_height = 1; +} + + +/* + * Read one row of pixels. + * Called only after load_image has read the image into the virtual array. + * Used for GRAYSCALE, MAPPEDGRAY, TRUECOLOR, and DIRECTCOLOR images. + */ + +METHODDEF(JDIMENSION) +get_rle_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + rle_source_ptr source = (rle_source_ptr) sinfo; + + source->row--; + source->pub.buffer = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, source->image, source->row, (JDIMENSION) 1, FALSE); + + return 1; +} + +/* + * Read one row of pixels. + * Called only after load_image has read the image into the virtual array. + * Used for PSEUDOCOLOR images. + */ + +METHODDEF(JDIMENSION) +get_pseudocolor_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + rle_source_ptr source = (rle_source_ptr) sinfo; + JSAMPROW src_row, dest_row; + JDIMENSION col; + rle_map *colormap; + int val; + + colormap = source->header.cmap; + dest_row = source->pub.buffer[0]; + source->row--; + src_row = * (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, source->image, source->row, (JDIMENSION) 1, FALSE); + + for (col = cinfo->image_width; col > 0; col--) { + val = GETJSAMPLE(*src_row++); + *dest_row++ = (JSAMPLE) (colormap[val ] >> 8); + *dest_row++ = (JSAMPLE) (colormap[val + 256] >> 8); + *dest_row++ = (JSAMPLE) (colormap[val + 512] >> 8); + } + + return 1; +} + + +/* + * Load the image into a virtual array. We have to do this because RLE + * files start at the lower left while the JPEG standard has them starting + * in the upper left. This is called the first time we want to get a row + * of input. What we do is load the RLE data into the array and then call + * the appropriate routine to read one row from the array. Before returning, + * we set source->pub.get_pixel_rows so that subsequent calls go straight to + * the appropriate row-reading routine. + */ + +METHODDEF(JDIMENSION) +load_image (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + rle_source_ptr source = (rle_source_ptr) sinfo; + JDIMENSION row, col; + JSAMPROW scanline, red_ptr, green_ptr, blue_ptr; + rle_pixel **rle_row; + rle_map *colormap; + char channel; +#ifdef PROGRESS_REPORT + cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; +#endif + + colormap = source->header.cmap; + rle_row = source->rle_row; + + /* Read the RLE data into our virtual array. + * We assume here that (a) rle_pixel is represented the same as JSAMPLE, + * and (b) we are not on a machine where FAR pointers differ from regular. + */ + RLE_CLR_BIT(source->header, RLE_ALPHA); /* don't read the alpha channel */ + +#ifdef PROGRESS_REPORT + if (progress != NULL) { + progress->pub.pass_limit = cinfo->image_height; + progress->pub.pass_counter = 0; + (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); + } +#endif + + switch (source->visual) { + + case GRAYSCALE: + case PSEUDOCOLOR: + for (row = 0; row < cinfo->image_height; row++) { + rle_row = (rle_pixel **) (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, source->image, row, (JDIMENSION) 1, TRUE); + rle_getrow(&source->header, rle_row); +#ifdef PROGRESS_REPORT + if (progress != NULL) { + progress->pub.pass_counter++; + (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); + } +#endif + } + break; + + case MAPPEDGRAY: + case TRUECOLOR: + for (row = 0; row < cinfo->image_height; row++) { + scanline = * (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, source->image, row, (JDIMENSION) 1, TRUE); + rle_row = source->rle_row; + rle_getrow(&source->header, rle_row); + + for (col = 0; col < cinfo->image_width; col++) { + for (channel = 0; channel < source->header.ncolors; channel++) { + *scanline++ = (JSAMPLE) + (colormap[GETJSAMPLE(rle_row[channel][col]) + 256 * channel] >> 8); + } + } + +#ifdef PROGRESS_REPORT + if (progress != NULL) { + progress->pub.pass_counter++; + (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); + } +#endif + } + break; + + case DIRECTCOLOR: + for (row = 0; row < cinfo->image_height; row++) { + scanline = * (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, source->image, row, (JDIMENSION) 1, TRUE); + rle_getrow(&source->header, rle_row); + + red_ptr = rle_row[0]; + green_ptr = rle_row[1]; + blue_ptr = rle_row[2]; + + for (col = cinfo->image_width; col > 0; col--) { + *scanline++ = *red_ptr++; + *scanline++ = *green_ptr++; + *scanline++ = *blue_ptr++; + } + +#ifdef PROGRESS_REPORT + if (progress != NULL) { + progress->pub.pass_counter++; + (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); + } +#endif + } + } + +#ifdef PROGRESS_REPORT + if (progress != NULL) + progress->completed_extra_passes++; +#endif + + /* Set up to call proper row-extraction routine in future */ + if (source->visual == PSEUDOCOLOR) { + source->pub.buffer = source->rle_row; + source->pub.get_pixel_rows = get_pseudocolor_row; + } else { + source->pub.get_pixel_rows = get_rle_row; + } + source->row = cinfo->image_height; + + /* And fetch the topmost (bottommost) row */ + return (*source->pub.get_pixel_rows) (cinfo, sinfo); +} + + +/* + * Finish up at the end of the file. + */ + +METHODDEF(void) +finish_input_rle (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + /* no work */ +} + + +/* + * The module selection routine for RLE format input. + */ + +GLOBAL(cjpeg_source_ptr) +jinit_read_rle (j_compress_ptr cinfo) +{ + rle_source_ptr source; + + /* Create module interface object */ + source = (rle_source_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(rle_source_struct)); + /* Fill in method ptrs */ + source->pub.start_input = start_input_rle; + source->pub.finish_input = finish_input_rle; + source->pub.get_pixel_rows = load_image; + + return (cjpeg_source_ptr) source; +} + +#endif /* RLE_SUPPORTED */ diff --git a/compat/libjpeg/rdswitch.c b/compat/libjpeg/rdswitch.c new file mode 100755 index 0000000..05753a3 --- /dev/null +++ b/compat/libjpeg/rdswitch.c @@ -0,0 +1,367 @@ +/* + * rdswitch.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * Modified 2003-2015 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to process some of cjpeg's more complicated + * command-line switches. Switches processed here are: + * -qtables file Read quantization tables from text file + * -scans file Read scan script from text file + * -quality N[,N,...] Set quality ratings + * -qslots N[,N,...] Set component quantization table selectors + * -sample HxV[,HxV,...] Set component sampling factors + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ +#include /* to declare isdigit(), isspace() */ + + +LOCAL(int) +text_getc (FILE * file) +/* Read next char, skipping over any comments (# to end of line) */ +/* A comment/newline sequence is returned as a newline */ +{ + register int ch; + + ch = getc(file); + if (ch == '#') { + do { + ch = getc(file); + } while (ch != '\n' && ch != EOF); + } + return ch; +} + + +LOCAL(boolean) +read_text_integer (FILE * file, long * result, int * termchar) +/* Read an unsigned decimal integer from a file, store it in result */ +/* Reads one trailing character after the integer; returns it in termchar */ +{ + register int ch; + register long val; + + /* Skip any leading whitespace, detect EOF */ + do { + ch = text_getc(file); + if (ch == EOF) { + *termchar = ch; + return FALSE; + } + } while (isspace(ch)); + + if (! isdigit(ch)) { + *termchar = ch; + return FALSE; + } + + val = ch - '0'; + while ((ch = text_getc(file)) != EOF) { + if (! isdigit(ch)) + break; + val *= 10; + val += ch - '0'; + } + *result = val; + *termchar = ch; + return TRUE; +} + + +GLOBAL(boolean) +read_quant_tables (j_compress_ptr cinfo, char * filename, boolean force_baseline) +/* Read a set of quantization tables from the specified file. + * The file is plain ASCII text: decimal numbers with whitespace between. + * Comments preceded by '#' may be included in the file. + * There may be one to NUM_QUANT_TBLS tables in the file, each of 64 values. + * The tables are implicitly numbered 0,1,etc. + * NOTE: does not affect the qslots mapping, which will default to selecting + * table 0 for luminance (or primary) components, 1 for chrominance components. + * You must use -qslots if you want a different component->table mapping. + */ +{ + FILE * fp; + int tblno, i, termchar; + long val; + unsigned int table[DCTSIZE2]; + + if ((fp = fopen(filename, "r")) == NULL) { + fprintf(stderr, "Can't open table file %s\n", filename); + return FALSE; + } + tblno = 0; + + while (read_text_integer(fp, &val, &termchar)) { /* read 1st element of table */ + if (tblno >= NUM_QUANT_TBLS) { + fprintf(stderr, "Too many tables in file %s\n", filename); + fclose(fp); + return FALSE; + } + table[0] = (unsigned int) val; + for (i = 1; i < DCTSIZE2; i++) { + if (! read_text_integer(fp, &val, &termchar)) { + fprintf(stderr, "Invalid table data in file %s\n", filename); + fclose(fp); + return FALSE; + } + table[i] = (unsigned int) val; + } + jpeg_add_quant_table(cinfo, tblno, table, cinfo->q_scale_factor[tblno], + force_baseline); + tblno++; + } + + if (termchar != EOF) { + fprintf(stderr, "Non-numeric data in file %s\n", filename); + fclose(fp); + return FALSE; + } + + fclose(fp); + return TRUE; +} + + +#ifdef C_MULTISCAN_FILES_SUPPORTED + +LOCAL(boolean) +read_scan_integer (FILE * file, long * result, int * termchar) +/* Variant of read_text_integer that always looks for a non-space termchar; + * this simplifies parsing of punctuation in scan scripts. + */ +{ + register int ch; + + if (! read_text_integer(file, result, termchar)) + return FALSE; + ch = *termchar; + while (ch != EOF && isspace(ch)) + ch = text_getc(file); + if (isdigit(ch)) { /* oops, put it back */ + if (ungetc(ch, file) == EOF) + return FALSE; + ch = ' '; + } else { + /* Any separators other than ';' and ':' are ignored; + * this allows user to insert commas, etc, if desired. + */ + if (ch != EOF && ch != ';' && ch != ':') + ch = ' '; + } + *termchar = ch; + return TRUE; +} + + +GLOBAL(boolean) +read_scan_script (j_compress_ptr cinfo, char * filename) +/* Read a scan script from the specified text file. + * Each entry in the file defines one scan to be emitted. + * Entries are separated by semicolons ';'. + * An entry contains one to four component indexes, + * optionally followed by a colon ':' and four progressive-JPEG parameters. + * The component indexes denote which component(s) are to be transmitted + * in the current scan. The first component has index 0. + * Sequential JPEG is used if the progressive-JPEG parameters are omitted. + * The file is free format text: any whitespace may appear between numbers + * and the ':' and ';' punctuation marks. Also, other punctuation (such + * as commas or dashes) can be placed between numbers if desired. + * Comments preceded by '#' may be included in the file. + * Note: we do very little validity checking here; + * jcmaster.c will validate the script parameters. + */ +{ + FILE * fp; + int scanno, ncomps, termchar; + long val; + jpeg_scan_info * scanptr; +#define MAX_SCANS 100 /* quite arbitrary limit */ + jpeg_scan_info scans[MAX_SCANS]; + + if ((fp = fopen(filename, "r")) == NULL) { + fprintf(stderr, "Can't open scan definition file %s\n", filename); + return FALSE; + } + scanptr = scans; + scanno = 0; + + while (read_scan_integer(fp, &val, &termchar)) { + if (scanno >= MAX_SCANS) { + fprintf(stderr, "Too many scans defined in file %s\n", filename); + fclose(fp); + return FALSE; + } + scanptr->component_index[0] = (int) val; + ncomps = 1; + while (termchar == ' ') { + if (ncomps >= MAX_COMPS_IN_SCAN) { + fprintf(stderr, "Too many components in one scan in file %s\n", + filename); + fclose(fp); + return FALSE; + } + if (! read_scan_integer(fp, &val, &termchar)) + goto bogus; + scanptr->component_index[ncomps] = (int) val; + ncomps++; + } + scanptr->comps_in_scan = ncomps; + if (termchar == ':') { + if (! read_scan_integer(fp, &val, &termchar) || termchar != ' ') + goto bogus; + scanptr->Ss = (int) val; + if (! read_scan_integer(fp, &val, &termchar) || termchar != ' ') + goto bogus; + scanptr->Se = (int) val; + if (! read_scan_integer(fp, &val, &termchar) || termchar != ' ') + goto bogus; + scanptr->Ah = (int) val; + if (! read_scan_integer(fp, &val, &termchar)) + goto bogus; + scanptr->Al = (int) val; + } else { + /* set non-progressive parameters */ + scanptr->Ss = 0; + scanptr->Se = DCTSIZE2-1; + scanptr->Ah = 0; + scanptr->Al = 0; + } + if (termchar != ';' && termchar != EOF) { +bogus: + fprintf(stderr, "Invalid scan entry format in file %s\n", filename); + fclose(fp); + return FALSE; + } + scanptr++, scanno++; + } + + if (termchar != EOF) { + fprintf(stderr, "Non-numeric data in file %s\n", filename); + fclose(fp); + return FALSE; + } + + if (scanno > 0) { + /* Stash completed scan list in cinfo structure. + * NOTE: for cjpeg's use, JPOOL_IMAGE is the right lifetime for this data, + * but if you want to compress multiple images you'd want JPOOL_PERMANENT. + */ + scanptr = (jpeg_scan_info *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + scanno * SIZEOF(jpeg_scan_info)); + MEMCOPY(scanptr, scans, scanno * SIZEOF(jpeg_scan_info)); + cinfo->scan_info = scanptr; + cinfo->num_scans = scanno; + } + + fclose(fp); + return TRUE; +} + +#endif /* C_MULTISCAN_FILES_SUPPORTED */ + + +GLOBAL(boolean) +set_quality_ratings (j_compress_ptr cinfo, char *arg, boolean force_baseline) +/* Process a quality-ratings parameter string, of the form + * N[,N,...] + * If there are more q-table slots than parameters, the last value is replicated. + */ +{ + int val = 75; /* default value */ + int tblno; + char ch; + + for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) { + if (*arg) { + ch = ','; /* if not set by sscanf, will be ',' */ + if (sscanf(arg, "%d%c", &val, &ch) < 1) + return FALSE; + if (ch != ',') /* syntax check */ + return FALSE; + /* Convert user 0-100 rating to percentage scaling */ + cinfo->q_scale_factor[tblno] = jpeg_quality_scaling(val); + while (*arg && *arg++ != ',') /* advance to next segment of arg string */ + ; + } else { + /* reached end of parameter, set remaining factors to last value */ + cinfo->q_scale_factor[tblno] = jpeg_quality_scaling(val); + } + } + jpeg_default_qtables(cinfo, force_baseline); + return TRUE; +} + + +GLOBAL(boolean) +set_quant_slots (j_compress_ptr cinfo, char *arg) +/* Process a quantization-table-selectors parameter string, of the form + * N[,N,...] + * If there are more components than parameters, the last value is replicated. + */ +{ + int val = 0; /* default table # */ + int ci; + char ch; + + for (ci = 0; ci < MAX_COMPONENTS; ci++) { + if (*arg) { + ch = ','; /* if not set by sscanf, will be ',' */ + if (sscanf(arg, "%d%c", &val, &ch) < 1) + return FALSE; + if (ch != ',') /* syntax check */ + return FALSE; + if (val < 0 || val >= NUM_QUANT_TBLS) { + fprintf(stderr, "JPEG quantization tables are numbered 0..%d\n", + NUM_QUANT_TBLS-1); + return FALSE; + } + cinfo->comp_info[ci].quant_tbl_no = val; + while (*arg && *arg++ != ',') /* advance to next segment of arg string */ + ; + } else { + /* reached end of parameter, set remaining components to last table */ + cinfo->comp_info[ci].quant_tbl_no = val; + } + } + return TRUE; +} + + +GLOBAL(boolean) +set_sample_factors (j_compress_ptr cinfo, char *arg) +/* Process a sample-factors parameter string, of the form + * HxV[,HxV,...] + * If there are more components than parameters, "1x1" is assumed for the rest. + */ +{ + int ci, val1, val2; + char ch1, ch2; + + for (ci = 0; ci < MAX_COMPONENTS; ci++) { + if (*arg) { + ch2 = ','; /* if not set by sscanf, will be ',' */ + if (sscanf(arg, "%d%c%d%c", &val1, &ch1, &val2, &ch2) < 3) + return FALSE; + if ((ch1 != 'x' && ch1 != 'X') || ch2 != ',') /* syntax check */ + return FALSE; + if (val1 <= 0 || val1 > MAX_SAMP_FACTOR || + val2 <= 0 || val2 > MAX_SAMP_FACTOR) { + fprintf(stderr, "JPEG sampling factors must be 1..%d\n", MAX_SAMP_FACTOR); + return FALSE; + } + cinfo->comp_info[ci].h_samp_factor = val1; + cinfo->comp_info[ci].v_samp_factor = val2; + while (*arg && *arg++ != ',') /* advance to next segment of arg string */ + ; + } else { + /* reached end of parameter, set remaining components to 1x1 sampling */ + cinfo->comp_info[ci].h_samp_factor = 1; + cinfo->comp_info[ci].v_samp_factor = 1; + } + } + return TRUE; +} diff --git a/compat/libjpeg/rdtarga.c b/compat/libjpeg/rdtarga.c new file mode 100755 index 0000000..d7ffc33 --- /dev/null +++ b/compat/libjpeg/rdtarga.c @@ -0,0 +1,500 @@ +/* + * rdtarga.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to read input images in Targa format. + * + * These routines may need modification for non-Unix environments or + * specialized applications. As they stand, they assume input from + * an ordinary stdio stream. They further assume that reading begins + * at the start of the file; start_input may need work if the + * user interface has already read some data (e.g., to determine that + * the file is indeed Targa format). + * + * Based on code contributed by Lee Daniel Crocker. + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ + +#ifdef TARGA_SUPPORTED + + +/* Macros to deal with unsigned chars as efficiently as compiler allows */ + +#ifdef HAVE_UNSIGNED_CHAR +typedef unsigned char U_CHAR; +#define UCH(x) ((int) (x)) +#else /* !HAVE_UNSIGNED_CHAR */ +#ifdef CHAR_IS_UNSIGNED +typedef char U_CHAR; +#define UCH(x) ((int) (x)) +#else +typedef char U_CHAR; +#define UCH(x) ((int) (x) & 0xFF) +#endif +#endif /* HAVE_UNSIGNED_CHAR */ + + +#define ReadOK(file,buffer,len) (JFREAD(file,buffer,len) == ((size_t) (len))) + + +/* Private version of data source object */ + +typedef struct _tga_source_struct * tga_source_ptr; + +typedef struct _tga_source_struct { + struct cjpeg_source_struct pub; /* public fields */ + + j_compress_ptr cinfo; /* back link saves passing separate parm */ + + JSAMPARRAY colormap; /* Targa colormap (converted to my format) */ + + jvirt_sarray_ptr whole_image; /* Needed if funny input row order */ + JDIMENSION current_row; /* Current logical row number to read */ + + /* Pointer to routine to extract next Targa pixel from input file */ + JMETHOD(void, read_pixel, (tga_source_ptr sinfo)); + + /* Result of read_pixel is delivered here: */ + U_CHAR tga_pixel[4]; + + int pixel_size; /* Bytes per Targa pixel (1 to 4) */ + + /* State info for reading RLE-coded pixels; both counts must be init to 0 */ + int block_count; /* # of pixels remaining in RLE block */ + int dup_pixel_count; /* # of times to duplicate previous pixel */ + + /* This saves the correct pixel-row-expansion method for preload_image */ + JMETHOD(JDIMENSION, get_pixel_rows, (j_compress_ptr cinfo, + cjpeg_source_ptr sinfo)); +} tga_source_struct; + + +/* For expanding 5-bit pixel values to 8-bit with best rounding */ + +static const UINT8 c5to8bits[32] = { + 0, 8, 16, 25, 33, 41, 49, 58, + 66, 74, 82, 90, 99, 107, 115, 123, + 132, 140, 148, 156, 165, 173, 181, 189, + 197, 206, 214, 222, 230, 239, 247, 255 +}; + + + +LOCAL(int) +read_byte (tga_source_ptr sinfo) +/* Read next byte from Targa file */ +{ + register FILE *infile = sinfo->pub.input_file; + register int c; + + if ((c = getc(infile)) == EOF) + ERREXIT(sinfo->cinfo, JERR_INPUT_EOF); + return c; +} + + +LOCAL(void) +read_colormap (tga_source_ptr sinfo, int cmaplen, int mapentrysize) +/* Read the colormap from a Targa file */ +{ + int i; + + /* Presently only handles 24-bit BGR format */ + if (mapentrysize != 24) + ERREXIT(sinfo->cinfo, JERR_TGA_BADCMAP); + + for (i = 0; i < cmaplen; i++) { + sinfo->colormap[2][i] = (JSAMPLE) read_byte(sinfo); + sinfo->colormap[1][i] = (JSAMPLE) read_byte(sinfo); + sinfo->colormap[0][i] = (JSAMPLE) read_byte(sinfo); + } +} + + +/* + * read_pixel methods: get a single pixel from Targa file into tga_pixel[] + */ + +METHODDEF(void) +read_non_rle_pixel (tga_source_ptr sinfo) +/* Read one Targa pixel from the input file; no RLE expansion */ +{ + register FILE *infile = sinfo->pub.input_file; + register int i; + + for (i = 0; i < sinfo->pixel_size; i++) { + sinfo->tga_pixel[i] = (U_CHAR) getc(infile); + } +} + + +METHODDEF(void) +read_rle_pixel (tga_source_ptr sinfo) +/* Read one Targa pixel from the input file, expanding RLE data as needed */ +{ + register FILE *infile = sinfo->pub.input_file; + register int i; + + /* Duplicate previously read pixel? */ + if (sinfo->dup_pixel_count > 0) { + sinfo->dup_pixel_count--; + return; + } + + /* Time to read RLE block header? */ + if (--sinfo->block_count < 0) { /* decrement pixels remaining in block */ + i = read_byte(sinfo); + if (i & 0x80) { /* Start of duplicate-pixel block? */ + sinfo->dup_pixel_count = i & 0x7F; /* number of dups after this one */ + sinfo->block_count = 0; /* then read new block header */ + } else { + sinfo->block_count = i & 0x7F; /* number of pixels after this one */ + } + } + + /* Read next pixel */ + for (i = 0; i < sinfo->pixel_size; i++) { + sinfo->tga_pixel[i] = (U_CHAR) getc(infile); + } +} + + +/* + * Read one row of pixels. + * + * We provide several different versions depending on input file format. + */ + + +METHODDEF(JDIMENSION) +get_8bit_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading 8-bit grayscale pixels */ +{ + tga_source_ptr source = (tga_source_ptr) sinfo; + register JSAMPROW ptr; + register JDIMENSION col; + + ptr = source->pub.buffer[0]; + for (col = cinfo->image_width; col > 0; col--) { + (*source->read_pixel) (source); /* Load next pixel into tga_pixel */ + *ptr++ = (JSAMPLE) UCH(source->tga_pixel[0]); + } + return 1; +} + +METHODDEF(JDIMENSION) +get_8bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading 8-bit colormap indexes */ +{ + tga_source_ptr source = (tga_source_ptr) sinfo; + register int t; + register JSAMPROW ptr; + register JDIMENSION col; + register JSAMPARRAY colormap = source->colormap; + + ptr = source->pub.buffer[0]; + for (col = cinfo->image_width; col > 0; col--) { + (*source->read_pixel) (source); /* Load next pixel into tga_pixel */ + t = UCH(source->tga_pixel[0]); + *ptr++ = colormap[0][t]; + *ptr++ = colormap[1][t]; + *ptr++ = colormap[2][t]; + } + return 1; +} + +METHODDEF(JDIMENSION) +get_16bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading 16-bit pixels */ +{ + tga_source_ptr source = (tga_source_ptr) sinfo; + register int t; + register JSAMPROW ptr; + register JDIMENSION col; + + ptr = source->pub.buffer[0]; + for (col = cinfo->image_width; col > 0; col--) { + (*source->read_pixel) (source); /* Load next pixel into tga_pixel */ + t = UCH(source->tga_pixel[0]); + t += UCH(source->tga_pixel[1]) << 8; + /* We expand 5 bit data to 8 bit sample width. + * The format of the 16-bit (LSB first) input word is + * xRRRRRGGGGGBBBBB + */ + ptr[2] = (JSAMPLE) c5to8bits[t & 0x1F]; + t >>= 5; + ptr[1] = (JSAMPLE) c5to8bits[t & 0x1F]; + t >>= 5; + ptr[0] = (JSAMPLE) c5to8bits[t & 0x1F]; + ptr += 3; + } + return 1; +} + +METHODDEF(JDIMENSION) +get_24bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +/* This version is for reading 24-bit pixels */ +{ + tga_source_ptr source = (tga_source_ptr) sinfo; + register JSAMPROW ptr; + register JDIMENSION col; + + ptr = source->pub.buffer[0]; + for (col = cinfo->image_width; col > 0; col--) { + (*source->read_pixel) (source); /* Load next pixel into tga_pixel */ + *ptr++ = (JSAMPLE) UCH(source->tga_pixel[2]); /* change BGR to RGB order */ + *ptr++ = (JSAMPLE) UCH(source->tga_pixel[1]); + *ptr++ = (JSAMPLE) UCH(source->tga_pixel[0]); + } + return 1; +} + +/* + * Targa also defines a 32-bit pixel format with order B,G,R,A. + * We presently ignore the attribute byte, so the code for reading + * these pixels is identical to the 24-bit routine above. + * This works because the actual pixel length is only known to read_pixel. + */ + +#define get_32bit_row get_24bit_row + + +/* + * This method is for re-reading the input data in standard top-down + * row order. The entire image has already been read into whole_image + * with proper conversion of pixel format, but it's in a funny row order. + */ + +METHODDEF(JDIMENSION) +get_memory_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + tga_source_ptr source = (tga_source_ptr) sinfo; + JDIMENSION source_row; + + /* Compute row of source that maps to current_row of normal order */ + /* For now, assume image is bottom-up and not interlaced. */ + /* NEEDS WORK to support interlaced images! */ + source_row = cinfo->image_height - source->current_row - 1; + + /* Fetch that row from virtual array */ + source->pub.buffer = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, source->whole_image, + source_row, (JDIMENSION) 1, FALSE); + + source->current_row++; + return 1; +} + + +/* + * This method loads the image into whole_image during the first call on + * get_pixel_rows. The get_pixel_rows pointer is then adjusted to call + * get_memory_row on subsequent calls. + */ + +METHODDEF(JDIMENSION) +preload_image (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + tga_source_ptr source = (tga_source_ptr) sinfo; + JDIMENSION row; + cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; + + /* Read the data into a virtual array in input-file row order. */ + for (row = 0; row < cinfo->image_height; row++) { + if (progress != NULL) { + progress->pub.pass_counter = (long) row; + progress->pub.pass_limit = (long) cinfo->image_height; + (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); + } + source->pub.buffer = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, source->whole_image, row, (JDIMENSION) 1, TRUE); + (*source->get_pixel_rows) (cinfo, sinfo); + } + if (progress != NULL) + progress->completed_extra_passes++; + + /* Set up to read from the virtual array in unscrambled order */ + source->pub.get_pixel_rows = get_memory_row; + source->current_row = 0; + /* And read the first row */ + return get_memory_row(cinfo, sinfo); +} + + +/* + * Read the file header; return image size and component count. + */ + +METHODDEF(void) +start_input_tga (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + tga_source_ptr source = (tga_source_ptr) sinfo; + U_CHAR targaheader[18]; + int idlen, cmaptype, subtype, flags, interlace_type, components; + unsigned int width, height, maplen; + boolean is_bottom_up; + +#define GET_2B(offset) ((unsigned int) UCH(targaheader[offset]) + \ + (((unsigned int) UCH(targaheader[offset+1])) << 8)) + + if (! ReadOK(source->pub.input_file, targaheader, 18)) + ERREXIT(cinfo, JERR_INPUT_EOF); + + /* Pretend "15-bit" pixels are 16-bit --- we ignore attribute bit anyway */ + if (targaheader[16] == 15) + targaheader[16] = 16; + + idlen = UCH(targaheader[0]); + cmaptype = UCH(targaheader[1]); + subtype = UCH(targaheader[2]); + maplen = GET_2B(5); + width = GET_2B(12); + height = GET_2B(14); + source->pixel_size = UCH(targaheader[16]) >> 3; + flags = UCH(targaheader[17]); /* Image Descriptor byte */ + + is_bottom_up = ((flags & 0x20) == 0); /* bit 5 set => top-down */ + interlace_type = flags >> 6; /* bits 6/7 are interlace code */ + + if (cmaptype > 1 || /* cmaptype must be 0 or 1 */ + source->pixel_size < 1 || source->pixel_size > 4 || + (UCH(targaheader[16]) & 7) != 0 || /* bits/pixel must be multiple of 8 */ + interlace_type != 0) /* currently don't allow interlaced image */ + ERREXIT(cinfo, JERR_TGA_BADPARMS); + + if (subtype > 8) { + /* It's an RLE-coded file */ + source->read_pixel = read_rle_pixel; + source->block_count = source->dup_pixel_count = 0; + subtype -= 8; + } else { + /* Non-RLE file */ + source->read_pixel = read_non_rle_pixel; + } + + /* Now should have subtype 1, 2, or 3 */ + components = 3; /* until proven different */ + cinfo->in_color_space = JCS_RGB; + + switch (subtype) { + case 1: /* Colormapped image */ + if (source->pixel_size == 1 && cmaptype == 1) + source->get_pixel_rows = get_8bit_row; + else + ERREXIT(cinfo, JERR_TGA_BADPARMS); + TRACEMS2(cinfo, 1, JTRC_TGA_MAPPED, width, height); + break; + case 2: /* RGB image */ + switch (source->pixel_size) { + case 2: + source->get_pixel_rows = get_16bit_row; + break; + case 3: + source->get_pixel_rows = get_24bit_row; + break; + case 4: + source->get_pixel_rows = get_32bit_row; + break; + default: + ERREXIT(cinfo, JERR_TGA_BADPARMS); + break; + } + TRACEMS2(cinfo, 1, JTRC_TGA, width, height); + break; + case 3: /* Grayscale image */ + components = 1; + cinfo->in_color_space = JCS_GRAYSCALE; + if (source->pixel_size == 1) + source->get_pixel_rows = get_8bit_gray_row; + else + ERREXIT(cinfo, JERR_TGA_BADPARMS); + TRACEMS2(cinfo, 1, JTRC_TGA_GRAY, width, height); + break; + default: + ERREXIT(cinfo, JERR_TGA_BADPARMS); + break; + } + + if (is_bottom_up) { + /* Create a virtual array to buffer the upside-down image. */ + source->whole_image = (*cinfo->mem->request_virt_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, + (JDIMENSION) width * components, (JDIMENSION) height, (JDIMENSION) 1); + if (cinfo->progress != NULL) { + cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; + progress->total_extra_passes++; /* count file input as separate pass */ + } + /* source->pub.buffer will point to the virtual array. */ + source->pub.buffer_height = 1; /* in case anyone looks at it */ + source->pub.get_pixel_rows = preload_image; + } else { + /* Don't need a virtual array, but do need a one-row input buffer. */ + source->whole_image = NULL; + source->pub.buffer = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (JDIMENSION) width * components, (JDIMENSION) 1); + source->pub.buffer_height = 1; + source->pub.get_pixel_rows = source->get_pixel_rows; + } + + while (idlen--) /* Throw away ID field */ + (void) read_byte(source); + + if (maplen > 0) { + if (maplen > 256 || GET_2B(3) != 0) + ERREXIT(cinfo, JERR_TGA_BADCMAP); + /* Allocate space to store the colormap */ + source->colormap = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, (JDIMENSION) maplen, (JDIMENSION) 3); + /* and read it from the file */ + read_colormap(source, (int) maplen, UCH(targaheader[7])); + } else { + if (cmaptype) /* but you promised a cmap! */ + ERREXIT(cinfo, JERR_TGA_BADPARMS); + source->colormap = NULL; + } + + cinfo->input_components = components; + cinfo->data_precision = 8; + cinfo->image_width = width; + cinfo->image_height = height; +} + + +/* + * Finish up at the end of the file. + */ + +METHODDEF(void) +finish_input_tga (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) +{ + /* no work */ +} + + +/* + * The module selection routine for Targa format input. + */ + +GLOBAL(cjpeg_source_ptr) +jinit_read_targa (j_compress_ptr cinfo) +{ + tga_source_ptr source; + + /* Create module interface object */ + source = (tga_source_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(tga_source_struct)); + source->cinfo = cinfo; /* make back link for subroutines */ + /* Fill in method ptrs, except get_pixel_rows which start_input sets */ + source->pub.start_input = start_input_tga; + source->pub.finish_input = finish_input_tga; + + return (cjpeg_source_ptr) source; +} + +#endif /* TARGA_SUPPORTED */ diff --git a/compat/libjpeg/structure.txt b/compat/libjpeg/structure.txt new file mode 100755 index 0000000..04d9577 --- /dev/null +++ b/compat/libjpeg/structure.txt @@ -0,0 +1,942 @@ +IJG JPEG LIBRARY: SYSTEM ARCHITECTURE + +Copyright (C) 1991-2013, Thomas G. Lane, Guido Vollbeding. +This file is part of the Independent JPEG Group's software. +For conditions of distribution and use, see the accompanying README file. + + +This file provides an overview of the architecture of the IJG JPEG software; +that is, the functions of the various modules in the system and the interfaces +between modules. For more precise details about any data structure or calling +convention, see the include files and comments in the source code. + +We assume that the reader is already somewhat familiar with the JPEG standard. +The README file includes references for learning about JPEG. The file +libjpeg.txt describes the library from the viewpoint of an application +programmer using the library; it's best to read that file before this one. +Also, the file coderules.txt describes the coding style conventions we use. + +In this document, JPEG-specific terminology follows the JPEG standard: + A "component" means a color channel, e.g., Red or Luminance. + A "sample" is a single component value (i.e., one number in the image data). + A "coefficient" is a frequency coefficient (a DCT transform output number). + A "block" is an array of samples or coefficients. + An "MCU" (minimum coded unit) is an interleaved set of blocks of size + determined by the sampling factors, or a single block in a + noninterleaved scan. +We do not use the terms "pixel" and "sample" interchangeably. When we say +pixel, we mean an element of the full-size image, while a sample is an element +of the downsampled image. Thus the number of samples may vary across +components while the number of pixels does not. (This terminology is not used +rigorously throughout the code, but it is used in places where confusion would +otherwise result.) + + +*** System features *** + +The IJG distribution contains two parts: + * A subroutine library for JPEG compression and decompression. + * cjpeg/djpeg, two sample applications that use the library to transform + JFIF JPEG files to and from several other image formats. +cjpeg/djpeg are of no great intellectual complexity: they merely add a simple +command-line user interface and I/O routines for several uncompressed image +formats. This document concentrates on the library itself. + +We desire the library to be capable of supporting all JPEG baseline, extended +sequential, and progressive DCT processes. The library does not support the +hierarchical or lossless processes defined in the standard. + +Within these limits, any set of compression parameters allowed by the JPEG +spec should be readable for decompression. (We can be more restrictive about +what formats we can generate.) Although the system design allows for all +parameter values, some uncommon settings are not yet implemented and may +never be; nonintegral sampling ratios are the prime example. Furthermore, +we treat 8-bit vs. 12-bit data precision as a compile-time switch, not a +run-time option, because most machines can store 8-bit pixels much more +compactly than 12-bit. + +By itself, the library handles only interchange JPEG datastreams --- in +particular the widely used JFIF file format. The library can be used by +surrounding code to process interchange or abbreviated JPEG datastreams that +are embedded in more complex file formats. (For example, libtiff uses this +library to implement JPEG compression within the TIFF file format.) + +The library includes a substantial amount of code that is not covered by the +JPEG standard but is necessary for typical applications of JPEG. These +functions preprocess the image before JPEG compression or postprocess it after +decompression. They include colorspace conversion, downsampling/upsampling, +and color quantization. This code can be omitted if not needed. + +A wide range of quality vs. speed tradeoffs are possible in JPEG processing, +and even more so in decompression postprocessing. The decompression library +provides multiple implementations that cover most of the useful tradeoffs, +ranging from very-high-quality down to fast-preview operation. On the +compression side we have generally not provided low-quality choices, since +compression is normally less time-critical. It should be understood that the +low-quality modes may not meet the JPEG standard's accuracy requirements; +nonetheless, they are useful for viewers. + + +*** Portability issues *** + +Portability is an essential requirement for the library. The key portability +issues that show up at the level of system architecture are: + +1. Memory usage. We want the code to be able to run on PC-class machines +with limited memory. Images should therefore be processed sequentially (in +strips), to avoid holding the whole image in memory at once. Where a +full-image buffer is necessary, we should be able to use either virtual memory +or temporary files. + +2. Near/far pointer distinction. To run efficiently on 80x86 machines, the +code should distinguish "small" objects (kept in near data space) from +"large" ones (kept in far data space). This is an annoying restriction, but +fortunately it does not impact code quality for less brain-damaged machines, +and the source code clutter turns out to be minimal with sufficient use of +pointer typedefs. + +3. Data precision. We assume that "char" is at least 8 bits, "short" and +"int" at least 16, "long" at least 32. The code will work fine with larger +data sizes, although memory may be used inefficiently in some cases. However, +the JPEG compressed datastream must ultimately appear on external storage as a +sequence of 8-bit bytes if it is to conform to the standard. This may pose a +problem on machines where char is wider than 8 bits. The library represents +compressed data as an array of values of typedef JOCTET. If no data type +exactly 8 bits wide is available, custom data source and data destination +modules must be written to unpack and pack the chosen JOCTET datatype into +8-bit external representation. + + +*** System overview *** + +The compressor and decompressor are each divided into two main sections: +the JPEG compressor or decompressor proper, and the preprocessing or +postprocessing functions. The interface between these two sections is the +image data that the official JPEG spec regards as its input or output: this +data is in the colorspace to be used for compression, and it is downsampled +to the sampling factors to be used. The preprocessing and postprocessing +steps are responsible for converting a normal image representation to or from +this form. (Those few applications that want to deal with YCbCr downsampled +data can skip the preprocessing or postprocessing step.) + +Looking more closely, the compressor library contains the following main +elements: + + Preprocessing: + * Color space conversion (e.g., RGB to YCbCr). + * Edge expansion and downsampling. Optionally, this step can do simple + smoothing --- this is often helpful for low-quality source data. + JPEG proper: + * MCU assembly, DCT, quantization. + * Entropy coding (sequential or progressive, Huffman or arithmetic). + +In addition to these modules we need overall control, marker generation, +and support code (memory management & error handling). There is also a +module responsible for physically writing the output data --- typically +this is just an interface to fwrite(), but some applications may need to +do something else with the data. + +The decompressor library contains the following main elements: + + JPEG proper: + * Entropy decoding (sequential or progressive, Huffman or arithmetic). + * Dequantization, inverse DCT, MCU disassembly. + Postprocessing: + * Upsampling. Optionally, this step may be able to do more general + rescaling of the image. + * Color space conversion (e.g., YCbCr to RGB). This step may also + provide gamma adjustment [ currently it does not ]. + * Optional color quantization (e.g., reduction to 256 colors). + * Optional color precision reduction (e.g., 24-bit to 15-bit color). + [This feature is not currently implemented.] + +We also need overall control, marker parsing, and a data source module. +The support code (memory management & error handling) can be shared with +the compression half of the library. + +There may be several implementations of each of these elements, particularly +in the decompressor, where a wide range of speed/quality tradeoffs is very +useful. It must be understood that some of the best speedups involve +merging adjacent steps in the pipeline. For example, upsampling, color space +conversion, and color quantization might all be done at once when using a +low-quality ordered-dither technique. The system architecture is designed to +allow such merging where appropriate. + + +Note: it is convenient to regard edge expansion (padding to block boundaries) +as a preprocessing/postprocessing function, even though the JPEG spec includes +it in compression/decompression. We do this because downsampling/upsampling +can be simplified a little if they work on padded data: it's not necessary to +have special cases at the right and bottom edges. Therefore the interface +buffer is always an integral number of blocks wide and high, and we expect +compression preprocessing to pad the source data properly. Padding will occur +only to the next block (block_size-sample) boundary. In an interleaved-scan +situation, additional dummy blocks may be used to fill out MCUs, but the MCU +assembly and disassembly logic will create or discard these blocks internally. +(This is advantageous for speed reasons, since we avoid DCTing the dummy +blocks. It also permits a small reduction in file size, because the +compressor can choose dummy block contents so as to minimize their size +in compressed form. Finally, it makes the interface buffer specification +independent of whether the file is actually interleaved or not.) +Applications that wish to deal directly with the downsampled data must +provide similar buffering and padding for odd-sized images. + + +*** Poor man's object-oriented programming *** + +It should be clear by now that we have a lot of quasi-independent processing +steps, many of which have several possible behaviors. To avoid cluttering the +code with lots of switch statements, we use a simple form of object-style +programming to separate out the different possibilities. + +For example, two different color quantization algorithms could be implemented +as two separate modules that present the same external interface; at runtime, +the calling code will access the proper module indirectly through an "object". + +We can get the limited features we need while staying within portable C. +The basic tool is a function pointer. An "object" is just a struct +containing one or more function pointer fields, each of which corresponds to +a method name in real object-oriented languages. During initialization we +fill in the function pointers with references to whichever module we have +determined we need to use in this run. Then invocation of the module is done +by indirecting through a function pointer; on most machines this is no more +expensive than a switch statement, which would be the only other way of +making the required run-time choice. The really significant benefit, of +course, is keeping the source code clean and well structured. + +We can also arrange to have private storage that varies between different +implementations of the same kind of object. We do this by making all the +module-specific object structs be separately allocated entities, which will +be accessed via pointers in the master compression or decompression struct. +The "public" fields or methods for a given kind of object are specified by +a commonly known struct. But a module's initialization code can allocate +a larger struct that contains the common struct as its first member, plus +additional private fields. With appropriate pointer casting, the module's +internal functions can access these private fields. (For a simple example, +see jdatadst.c, which implements the external interface specified by struct +jpeg_destination_mgr, but adds extra fields.) + +(Of course this would all be a lot easier if we were using C++, but we are +not yet prepared to assume that everyone has a C++ compiler.) + +An important benefit of this scheme is that it is easy to provide multiple +versions of any method, each tuned to a particular case. While a lot of +precalculation might be done to select an optimal implementation of a method, +the cost per invocation is constant. For example, the upsampling step might +have a "generic" method, plus one or more "hardwired" methods for the most +popular sampling factors; the hardwired methods would be faster because they'd +use straight-line code instead of for-loops. The cost to determine which +method to use is paid only once, at startup, and the selection criteria are +hidden from the callers of the method. + +This plan differs a little bit from usual object-oriented structures, in that +only one instance of each object class will exist during execution. The +reason for having the class structure is that on different runs we may create +different instances (choose to execute different modules). You can think of +the term "method" as denoting the common interface presented by a particular +set of interchangeable functions, and "object" as denoting a group of related +methods, or the total shared interface behavior of a group of modules. + + +*** Overall control structure *** + +We previously mentioned the need for overall control logic in the compression +and decompression libraries. In IJG implementations prior to v5, overall +control was mostly provided by "pipeline control" modules, which proved to be +large, unwieldy, and hard to understand. To improve the situation, the +control logic has been subdivided into multiple modules. The control modules +consist of: + +1. Master control for module selection and initialization. This has two +responsibilities: + + 1A. Startup initialization at the beginning of image processing. + The individual processing modules to be used in this run are selected + and given initialization calls. + + 1B. Per-pass control. This determines how many passes will be performed + and calls each active processing module to configure itself + appropriately at the beginning of each pass. End-of-pass processing, + where necessary, is also invoked from the master control module. + + Method selection is partially distributed, in that a particular processing + module may contain several possible implementations of a particular method, + which it will select among when given its initialization call. The master + control code need only be concerned with decisions that affect more than + one module. + +2. Data buffering control. A separate control module exists for each + inter-processing-step data buffer. This module is responsible for + invoking the processing steps that write or read that data buffer. + +Each buffer controller sees the world as follows: + +input data => processing step A => buffer => processing step B => output data + | | | + ------------------ controller ------------------ + +The controller knows the dataflow requirements of steps A and B: how much data +they want to accept in one chunk and how much they output in one chunk. Its +function is to manage its buffer and call A and B at the proper times. + +A data buffer control module may itself be viewed as a processing step by a +higher-level control module; thus the control modules form a binary tree with +elementary processing steps at the leaves of the tree. + +The control modules are objects. A considerable amount of flexibility can +be had by replacing implementations of a control module. For example: +* Merging of adjacent steps in the pipeline is done by replacing a control + module and its pair of processing-step modules with a single processing- + step module. (Hence the possible merges are determined by the tree of + control modules.) +* In some processing modes, a given interstep buffer need only be a "strip" + buffer large enough to accommodate the desired data chunk sizes. In other + modes, a full-image buffer is needed and several passes are required. + The control module determines which kind of buffer is used and manipulates + virtual array buffers as needed. One or both processing steps may be + unaware of the multi-pass behavior. + +In theory, we might be able to make all of the data buffer controllers +interchangeable and provide just one set of implementations for all. In +practice, each one contains considerable special-case processing for its +particular job. The buffer controller concept should be regarded as an +overall system structuring principle, not as a complete description of the +task performed by any one controller. + + +*** Compression object structure *** + +Here is a sketch of the logical structure of the JPEG compression library: + + |-- Colorspace conversion + |-- Preprocessing controller --| + | |-- Downsampling +Main controller --| + | |-- Forward DCT, quantize + |-- Coefficient controller --| + |-- Entropy encoding + +This sketch also describes the flow of control (subroutine calls) during +typical image data processing. Each of the components shown in the diagram is +an "object" which may have several different implementations available. One +or more source code files contain the actual implementation(s) of each object. + +The objects shown above are: + +* Main controller: buffer controller for the subsampled-data buffer, which + holds the preprocessed input data. This controller invokes preprocessing to + fill the subsampled-data buffer, and JPEG compression to empty it. There is + usually no need for a full-image buffer here; a strip buffer is adequate. + +* Preprocessing controller: buffer controller for the downsampling input data + buffer, which lies between colorspace conversion and downsampling. Note + that a unified conversion/downsampling module would probably replace this + controller entirely. + +* Colorspace conversion: converts application image data into the desired + JPEG color space; also changes the data from pixel-interleaved layout to + separate component planes. Processes one pixel row at a time. + +* Downsampling: performs reduction of chroma components as required. + Optionally may perform pixel-level smoothing as well. Processes a "row + group" at a time, where a row group is defined as Vmax pixel rows of each + component before downsampling, and Vk sample rows afterwards (remember Vk + differs across components). Some downsampling or smoothing algorithms may + require context rows above and below the current row group; the + preprocessing controller is responsible for supplying these rows via proper + buffering. The downsampler is responsible for edge expansion at the right + edge (i.e., extending each sample row to a multiple of block_size samples); + but the preprocessing controller is responsible for vertical edge expansion + (i.e., duplicating the bottom sample row as needed to make a multiple of + block_size rows). + +* Coefficient controller: buffer controller for the DCT-coefficient data. + This controller handles MCU assembly, including insertion of dummy DCT + blocks when needed at the right or bottom edge. When performing + Huffman-code optimization or emitting a multiscan JPEG file, this + controller is responsible for buffering the full image. The equivalent of + one fully interleaved MCU row of subsampled data is processed per call, + even when the JPEG file is noninterleaved. + +* Forward DCT and quantization: Perform DCT, quantize, and emit coefficients. + Works on one or more DCT blocks at a time. (Note: the coefficients are now + emitted in normal array order, which the entropy encoder is expected to + convert to zigzag order as necessary. Prior versions of the IJG code did + the conversion to zigzag order within the quantization step.) + +* Entropy encoding: Perform Huffman or arithmetic entropy coding and emit the + coded data to the data destination module. Works on one MCU per call. + For progressive JPEG, the same DCT blocks are fed to the entropy coder + during each pass, and the coder must emit the appropriate subset of + coefficients. + +In addition to the above objects, the compression library includes these +objects: + +* Master control: determines the number of passes required, controls overall + and per-pass initialization of the other modules. + +* Marker writing: generates JPEG markers (except for RSTn, which is emitted + by the entropy encoder when needed). + +* Data destination manager: writes the output JPEG datastream to its final + destination (e.g., a file). The destination manager supplied with the + library knows how to write to a stdio stream or to a memory buffer; + for other behaviors, the surrounding application may provide its own + destination manager. + +* Memory manager: allocates and releases memory, controls virtual arrays + (with backing store management, where required). + +* Error handler: performs formatting and output of error and trace messages; + determines handling of nonfatal errors. The surrounding application may + override some or all of this object's methods to change error handling. + +* Progress monitor: supports output of "percent-done" progress reports. + This object represents an optional callback to the surrounding application: + if wanted, it must be supplied by the application. + +The error handler, destination manager, and progress monitor objects are +defined as separate objects in order to simplify application-specific +customization of the JPEG library. A surrounding application may override +individual methods or supply its own all-new implementation of one of these +objects. The object interfaces for these objects are therefore treated as +part of the application interface of the library, whereas the other objects +are internal to the library. + +The error handler and memory manager are shared by JPEG compression and +decompression; the progress monitor, if used, may be shared as well. + + +*** Decompression object structure *** + +Here is a sketch of the logical structure of the JPEG decompression library: + + |-- Entropy decoding + |-- Coefficient controller --| + | |-- Dequantize, Inverse DCT +Main controller --| + | |-- Upsampling + |-- Postprocessing controller --| |-- Colorspace conversion + |-- Color quantization + |-- Color precision reduction + +As before, this diagram also represents typical control flow. The objects +shown are: + +* Main controller: buffer controller for the subsampled-data buffer, which + holds the output of JPEG decompression proper. This controller's primary + task is to feed the postprocessing procedure. Some upsampling algorithms + may require context rows above and below the current row group; when this + is true, the main controller is responsible for managing its buffer so as + to make context rows available. In the current design, the main buffer is + always a strip buffer; a full-image buffer is never required. + +* Coefficient controller: buffer controller for the DCT-coefficient data. + This controller handles MCU disassembly, including deletion of any dummy + DCT blocks at the right or bottom edge. When reading a multiscan JPEG + file, this controller is responsible for buffering the full image. + (Buffering DCT coefficients, rather than samples, is necessary to support + progressive JPEG.) The equivalent of one fully interleaved MCU row of + subsampled data is processed per call, even when the source JPEG file is + noninterleaved. + +* Entropy decoding: Read coded data from the data source module and perform + Huffman or arithmetic entropy decoding. Works on one MCU per call. + For progressive JPEG decoding, the coefficient controller supplies the prior + coefficients of each MCU (initially all zeroes), which the entropy decoder + modifies in each scan. + +* Dequantization and inverse DCT: like it says. Note that the coefficients + buffered by the coefficient controller have NOT been dequantized; we + merge dequantization and inverse DCT into a single step for speed reasons. + When scaled-down output is asked for, simplified DCT algorithms may be used + that need fewer coefficients and emit fewer samples per DCT block, not the + full 8x8. Works on one DCT block at a time. + +* Postprocessing controller: buffer controller for the color quantization + input buffer, when quantization is in use. (Without quantization, this + controller just calls the upsampler.) For two-pass quantization, this + controller is responsible for buffering the full-image data. + +* Upsampling: restores chroma components to full size. (May support more + general output rescaling, too. Note that if undersized DCT outputs have + been emitted by the DCT module, this module must adjust so that properly + sized outputs are created.) Works on one row group at a time. This module + also calls the color conversion module, so its top level is effectively a + buffer controller for the upsampling->color conversion buffer. However, in + all but the highest-quality operating modes, upsampling and color + conversion are likely to be merged into a single step. + +* Colorspace conversion: convert from JPEG color space to output color space, + and change data layout from separate component planes to pixel-interleaved. + Works on one pixel row at a time. + +* Color quantization: reduce the data to colormapped form, using either an + externally specified colormap or an internally generated one. This module + is not used for full-color output. Works on one pixel row at a time; may + require two passes to generate a color map. Note that the output will + always be a single component representing colormap indexes. In the current + design, the output values are JSAMPLEs, so an 8-bit compilation cannot + quantize to more than 256 colors. This is unlikely to be a problem in + practice. + +* Color reduction: this module handles color precision reduction, e.g., + generating 15-bit color (5 bits/primary) from JPEG's 24-bit output. + Not quite clear yet how this should be handled... should we merge it with + colorspace conversion??? + +Note that some high-speed operating modes might condense the entire +postprocessing sequence to a single module (upsample, color convert, and +quantize in one step). + +In addition to the above objects, the decompression library includes these +objects: + +* Master control: determines the number of passes required, controls overall + and per-pass initialization of the other modules. This is subdivided into + input and output control: jdinput.c controls only input-side processing, + while jdmaster.c handles overall initialization and output-side control. + +* Marker reading: decodes JPEG markers (except for RSTn). + +* Data source manager: supplies the input JPEG datastream. The source + manager supplied with the library knows how to read from a stdio stream + or from a memory buffer; for other behaviors, the surrounding application + may provide its own source manager. + +* Memory manager: same as for compression library. + +* Error handler: same as for compression library. + +* Progress monitor: same as for compression library. + +As with compression, the data source manager, error handler, and progress +monitor are candidates for replacement by a surrounding application. + + +*** Decompression input and output separation *** + +To support efficient incremental display of progressive JPEG files, the +decompressor is divided into two sections that can run independently: + +1. Data input includes marker parsing, entropy decoding, and input into the + coefficient controller's DCT coefficient buffer. Note that this + processing is relatively cheap and fast. + +2. Data output reads from the DCT coefficient buffer and performs the IDCT + and all postprocessing steps. + +For a progressive JPEG file, the data input processing is allowed to get +arbitrarily far ahead of the data output processing. (This occurs only +if the application calls jpeg_consume_input(); otherwise input and output +run in lockstep, since the input section is called only when the output +section needs more data.) In this way the application can avoid making +extra display passes when data is arriving faster than the display pass +can run. Furthermore, it is possible to abort an output pass without +losing anything, since the coefficient buffer is read-only as far as the +output section is concerned. See libjpeg.txt for more detail. + +A full-image coefficient array is only created if the JPEG file has multiple +scans (or if the application specifies buffered-image mode anyway). When +reading a single-scan file, the coefficient controller normally creates only +a one-MCU buffer, so input and output processing must run in lockstep in this +case. jpeg_consume_input() is effectively a no-op in this situation. + +The main impact of dividing the decompressor in this fashion is that we must +be very careful with shared variables in the cinfo data structure. Each +variable that can change during the course of decompression must be +classified as belonging to data input or data output, and each section must +look only at its own variables. For example, the data output section may not +depend on any of the variables that describe the current scan in the JPEG +file, because these may change as the data input section advances into a new +scan. + +The progress monitor is (somewhat arbitrarily) defined to treat input of the +file as one pass when buffered-image mode is not used, and to ignore data +input work completely when buffered-image mode is used. Note that the +library has no reliable way to predict the number of passes when dealing +with a progressive JPEG file, nor can it predict the number of output passes +in buffered-image mode. So the work estimate is inherently bogus anyway. + +No comparable division is currently made in the compression library, because +there isn't any real need for it. + + +*** Data formats *** + +Arrays of pixel sample values use the following data structure: + + typedef something JSAMPLE; a pixel component value, 0..MAXJSAMPLE + typedef JSAMPLE *JSAMPROW; ptr to a row of samples + typedef JSAMPROW *JSAMPARRAY; ptr to a list of rows + typedef JSAMPARRAY *JSAMPIMAGE; ptr to a list of color-component arrays + +The basic element type JSAMPLE will typically be one of unsigned char, +(signed) char, or short. Short will be used if samples wider than 8 bits are +to be supported (this is a compile-time option). Otherwise, unsigned char is +used if possible. If the compiler only supports signed chars, then it is +necessary to mask off the value when reading. Thus, all reads of JSAMPLE +values must be coded as "GETJSAMPLE(value)", where the macro will be defined +as "((value) & 0xFF)" on signed-char machines and "((int) (value))" elsewhere. + +With these conventions, JSAMPLE values can be assumed to be >= 0. This helps +simplify correct rounding during downsampling, etc. The JPEG standard's +specification that sample values run from -128..127 is accommodated by +subtracting 128 from the sample value in the DCT step. Similarly, during +decompression the output of the IDCT step will be immediately shifted back to +0..255. (NB: different values are required when 12-bit samples are in use. +The code is written in terms of MAXJSAMPLE and CENTERJSAMPLE, which will be +defined as 255 and 128 respectively in an 8-bit implementation, and as 4095 +and 2048 in a 12-bit implementation.) + +We use a pointer per row, rather than a two-dimensional JSAMPLE array. This +choice costs only a small amount of memory and has several benefits: +* Code using the data structure doesn't need to know the allocated width of + the rows. This simplifies edge expansion/compression, since we can work + in an array that's wider than the logical picture width. +* Indexing doesn't require multiplication; this is a performance win on many + machines. +* Arrays with more than 64K total elements can be supported even on machines + where malloc() cannot allocate chunks larger than 64K. +* The rows forming a component array may be allocated at different times + without extra copying. This trick allows some speedups in smoothing steps + that need access to the previous and next rows. + +Note that each color component is stored in a separate array; we don't use the +traditional layout in which the components of a pixel are stored together. +This simplifies coding of modules that work on each component independently, +because they don't need to know how many components there are. Furthermore, +we can read or write each component to a temporary file independently, which +is helpful when dealing with noninterleaved JPEG files. + +In general, a specific sample value is accessed by code such as + GETJSAMPLE(image[colorcomponent][row][col]) +where col is measured from the image left edge, but row is measured from the +first sample row currently in memory. Either of the first two indexings can +be precomputed by copying the relevant pointer. + + +Since most image-processing applications prefer to work on images in which +the components of a pixel are stored together, the data passed to or from the +surrounding application uses the traditional convention: a single pixel is +represented by N consecutive JSAMPLE values, and an image row is an array of +(# of color components)*(image width) JSAMPLEs. One or more rows of data can +be represented by a pointer of type JSAMPARRAY in this scheme. This scheme is +converted to component-wise storage inside the JPEG library. (Applications +that want to skip JPEG preprocessing or postprocessing will have to contend +with component-wise storage.) + + +Arrays of DCT-coefficient values use the following data structure: + + typedef short JCOEF; a 16-bit signed integer + typedef JCOEF JBLOCK[DCTSIZE2]; an 8x8 block of coefficients + typedef JBLOCK *JBLOCKROW; ptr to one horizontal row of 8x8 blocks + typedef JBLOCKROW *JBLOCKARRAY; ptr to a list of such rows + typedef JBLOCKARRAY *JBLOCKIMAGE; ptr to a list of color component arrays + +The underlying type is at least a 16-bit signed integer; while "short" is big +enough on all machines of interest, on some machines it is preferable to use +"int" for speed reasons, despite the storage cost. Coefficients are grouped +into 8x8 blocks (but we always use #defines DCTSIZE and DCTSIZE2 rather than +"8" and "64"). + +The contents of a coefficient block may be in either "natural" or zigzagged +order, and may be true values or divided by the quantization coefficients, +depending on where the block is in the processing pipeline. In the current +library, coefficient blocks are kept in natural order everywhere; the entropy +codecs zigzag or dezigzag the data as it is written or read. The blocks +contain quantized coefficients everywhere outside the DCT/IDCT subsystems. +(This latter decision may need to be revisited to support variable +quantization a la JPEG Part 3.) + +Notice that the allocation unit is now a row of 8x8 coefficient blocks, +corresponding to block_size rows of samples. Otherwise the structure +is much the same as for samples, and for the same reasons. + +On machines where malloc() can't handle a request bigger than 64Kb, this data +structure limits us to rows of less than 512 JBLOCKs, or a picture width of +4000+ pixels. This seems an acceptable restriction. + + +On 80x86 machines, the bottom-level pointer types (JSAMPROW and JBLOCKROW) +must be declared as "far" pointers, but the upper levels can be "near" +(implying that the pointer lists are allocated in the DS segment). +We use a #define symbol FAR, which expands to the "far" keyword when +compiling on 80x86 machines and to nothing elsewhere. + + +*** Suspendable processing *** + +In some applications it is desirable to use the JPEG library as an +incremental, memory-to-memory filter. In this situation the data source or +destination may be a limited-size buffer, and we can't rely on being able to +empty or refill the buffer at arbitrary times. Instead the application would +like to have control return from the library at buffer overflow/underrun, and +then resume compression or decompression at a later time. + +This scenario is supported for simple cases. (For anything more complex, we +recommend that the application "bite the bullet" and develop real multitasking +capability.) The libjpeg.txt file goes into more detail about the usage and +limitations of this capability; here we address the implications for library +structure. + +The essence of the problem is that the entropy codec (coder or decoder) must +be prepared to stop at arbitrary times. In turn, the controllers that call +the entropy codec must be able to stop before having produced or consumed all +the data that they normally would handle in one call. That part is reasonably +straightforward: we make the controller call interfaces include "progress +counters" which indicate the number of data chunks successfully processed, and +we require callers to test the counter rather than just assume all of the data +was processed. + +Rather than trying to restart at an arbitrary point, the current Huffman +codecs are designed to restart at the beginning of the current MCU after a +suspension due to buffer overflow/underrun. At the start of each call, the +codec's internal state is loaded from permanent storage (in the JPEG object +structures) into local variables. On successful completion of the MCU, the +permanent state is updated. (This copying is not very expensive, and may even +lead to *improved* performance if the local variables can be registerized.) +If a suspension occurs, the codec simply returns without updating the state, +thus effectively reverting to the start of the MCU. Note that this implies +leaving some data unprocessed in the source/destination buffer (ie, the +compressed partial MCU). The data source/destination module interfaces are +specified so as to make this possible. This also implies that the data buffer +must be large enough to hold a worst-case compressed MCU; a couple thousand +bytes should be enough. + +In a successive-approximation AC refinement scan, the progressive Huffman +decoder has to be able to undo assignments of newly nonzero coefficients if it +suspends before the MCU is complete, since decoding requires distinguishing +previously-zero and previously-nonzero coefficients. This is a bit tedious +but probably won't have much effect on performance. Other variants of Huffman +decoding need not worry about this, since they will just store the same values +again if forced to repeat the MCU. + +This approach would probably not work for an arithmetic codec, since its +modifiable state is quite large and couldn't be copied cheaply. Instead it +would have to suspend and resume exactly at the point of the buffer end. + +The JPEG marker reader is designed to cope with suspension at an arbitrary +point. It does so by backing up to the start of the marker parameter segment, +so the data buffer must be big enough to hold the largest marker of interest. +Again, a couple KB should be adequate. (A special "skip" convention is used +to bypass COM and APPn markers, so these can be larger than the buffer size +without causing problems; otherwise a 64K buffer would be needed in the worst +case.) + +The JPEG marker writer currently does *not* cope with suspension. +We feel that this is not necessary; it is much easier simply to require +the application to ensure there is enough buffer space before starting. (An +empty 2K buffer is more than sufficient for the header markers; and ensuring +there are a dozen or two bytes available before calling jpeg_finish_compress() +will suffice for the trailer.) This would not work for writing multi-scan +JPEG files, but we simply do not intend to support that capability with +suspension. + + +*** Memory manager services *** + +The JPEG library's memory manager controls allocation and deallocation of +memory, and it manages large "virtual" data arrays on machines where the +operating system does not provide virtual memory. Note that the same +memory manager serves both compression and decompression operations. + +In all cases, allocated objects are tied to a particular compression or +decompression master record, and they will be released when that master +record is destroyed. + +The memory manager does not provide explicit deallocation of objects. +Instead, objects are created in "pools" of free storage, and a whole pool +can be freed at once. This approach helps prevent storage-leak bugs, and +it speeds up operations whenever malloc/free are slow (as they often are). +The pools can be regarded as lifetime identifiers for objects. Two +pools/lifetimes are defined: + * JPOOL_PERMANENT lasts until master record is destroyed + * JPOOL_IMAGE lasts until done with image (JPEG datastream) +Permanent lifetime is used for parameters and tables that should be carried +across from one datastream to another; this includes all application-visible +parameters. Image lifetime is used for everything else. (A third lifetime, +JPOOL_PASS = one processing pass, was originally planned. However it was +dropped as not being worthwhile. The actual usage patterns are such that the +peak memory usage would be about the same anyway; and having per-pass storage +substantially complicates the virtual memory allocation rules --- see below.) + +The memory manager deals with three kinds of object: +1. "Small" objects. Typically these require no more than 10K-20K total. +2. "Large" objects. These may require tens to hundreds of K depending on + image size. Semantically they behave the same as small objects, but we + distinguish them for two reasons: + * On MS-DOS machines, large objects are referenced by FAR pointers, + small objects by NEAR pointers. + * Pool allocation heuristics may differ for large and small objects. + Note that individual "large" objects cannot exceed the size allowed by + type size_t, which may be 64K or less on some machines. +3. "Virtual" objects. These are large 2-D arrays of JSAMPLEs or JBLOCKs + (typically large enough for the entire image being processed). The + memory manager provides stripwise access to these arrays. On machines + without virtual memory, the rest of the array may be swapped out to a + temporary file. + +(Note: JSAMPARRAY and JBLOCKARRAY data structures are a combination of large +objects for the data proper and small objects for the row pointers. For +convenience and speed, the memory manager provides single routines to create +these structures. Similarly, virtual arrays include a small control block +and a JSAMPARRAY or JBLOCKARRAY working buffer, all created with one call.) + +In the present implementation, virtual arrays are only permitted to have image +lifespan. (Permanent lifespan would not be reasonable, and pass lifespan is +not very useful since a virtual array's raison d'etre is to store data for +multiple passes through the image.) We also expect that only "small" objects +will be given permanent lifespan, though this restriction is not required by +the memory manager. + +In a non-virtual-memory machine, some performance benefit can be gained by +making the in-memory buffers for virtual arrays be as large as possible. +(For small images, the buffers might fit entirely in memory, so blind +swapping would be very wasteful.) The memory manager will adjust the height +of the buffers to fit within a prespecified maximum memory usage. In order +to do this in a reasonably optimal fashion, the manager needs to allocate all +of the virtual arrays at once. Therefore, there isn't a one-step allocation +routine for virtual arrays; instead, there is a "request" routine that simply +allocates the control block, and a "realize" routine (called just once) that +determines space allocation and creates all of the actual buffers. The +realize routine must allow for space occupied by non-virtual large objects. +(We don't bother to factor in the space needed for small objects, on the +grounds that it isn't worth the trouble.) + +To support all this, we establish the following protocol for doing business +with the memory manager: + 1. Modules must request virtual arrays (which may have only image lifespan) + during the initial setup phase, i.e., in their jinit_xxx routines. + 2. All "large" objects (including JSAMPARRAYs and JBLOCKARRAYs) must also be + allocated during initial setup. + 3. realize_virt_arrays will be called at the completion of initial setup. + The above conventions ensure that sufficient information is available + for it to choose a good size for virtual array buffers. +Small objects of any lifespan may be allocated at any time. We expect that +the total space used for small objects will be small enough to be negligible +in the realize_virt_arrays computation. + +In a virtual-memory machine, we simply pretend that the available space is +infinite, thus causing realize_virt_arrays to decide that it can allocate all +the virtual arrays as full-size in-memory buffers. The overhead of the +virtual-array access protocol is very small when no swapping occurs. + +A virtual array can be specified to be "pre-zeroed"; when this flag is set, +never-yet-written sections of the array are set to zero before being made +available to the caller. If this flag is not set, never-written sections +of the array contain garbage. (This feature exists primarily because the +equivalent logic would otherwise be needed in jdcoefct.c for progressive +JPEG mode; we may as well make it available for possible other uses.) + +The first write pass on a virtual array is required to occur in top-to-bottom +order; read passes, as well as any write passes after the first one, may +access the array in any order. This restriction exists partly to simplify +the virtual array control logic, and partly because some file systems may not +support seeking beyond the current end-of-file in a temporary file. The main +implication of this restriction is that rearrangement of rows (such as +converting top-to-bottom data order to bottom-to-top) must be handled while +reading data out of the virtual array, not while putting it in. + + +*** Memory manager internal structure *** + +To isolate system dependencies as much as possible, we have broken the +memory manager into two parts. There is a reasonably system-independent +"front end" (jmemmgr.c) and a "back end" that contains only the code +likely to change across systems. All of the memory management methods +outlined above are implemented by the front end. The back end provides +the following routines for use by the front end (none of these routines +are known to the rest of the JPEG code): + +jpeg_mem_init, jpeg_mem_term system-dependent initialization/shutdown + +jpeg_get_small, jpeg_free_small interface to malloc and free library routines + (or their equivalents) + +jpeg_get_large, jpeg_free_large interface to FAR malloc/free in MSDOS machines; + else usually the same as + jpeg_get_small/jpeg_free_small + +jpeg_mem_available estimate available memory + +jpeg_open_backing_store create a backing-store object + +read_backing_store, manipulate a backing-store object +write_backing_store, +close_backing_store + +On some systems there will be more than one type of backing-store object +(specifically, in MS-DOS a backing store file might be an area of extended +memory as well as a disk file). jpeg_open_backing_store is responsible for +choosing how to implement a given object. The read/write/close routines +are method pointers in the structure that describes a given object; this +lets them be different for different object types. + +It may be necessary to ensure that backing store objects are explicitly +released upon abnormal program termination. For example, MS-DOS won't free +extended memory by itself. To support this, we will expect the main program +or surrounding application to arrange to call self_destruct (typically via +jpeg_destroy) upon abnormal termination. This may require a SIGINT signal +handler or equivalent. We don't want to have the back end module install its +own signal handler, because that would pre-empt the surrounding application's +ability to control signal handling. + +The IJG distribution includes several memory manager back end implementations. +Usually the same back end should be suitable for all applications on a given +system, but it is possible for an application to supply its own back end at +need. + + +*** Implications of DNL marker *** + +Some JPEG files may use a DNL marker to postpone definition of the image +height (this would be useful for a fax-like scanner's output, for instance). +In these files the SOF marker claims the image height is 0, and you only +find out the true image height at the end of the first scan. + +We could read these files as follows: +1. Upon seeing zero image height, replace it by 65535 (the maximum allowed). +2. When the DNL is found, update the image height in the global image + descriptor. +This implies that control modules must avoid making copies of the image +height, and must re-test for termination after each MCU row. This would +be easy enough to do. + +In cases where image-size data structures are allocated, this approach will +result in very inefficient use of virtual memory or much-larger-than-necessary +temporary files. This seems acceptable for something that probably won't be a +mainstream usage. People might have to forgo use of memory-hogging options +(such as two-pass color quantization or noninterleaved JPEG files) if they +want efficient conversion of such files. (One could improve efficiency by +demanding a user-supplied upper bound for the height, less than 65536; in most +cases it could be much less.) + +The standard also permits the SOF marker to overestimate the image height, +with a DNL to give the true, smaller height at the end of the first scan. +This would solve the space problems if the overestimate wasn't too great. +However, it implies that you don't even know whether DNL will be used. + +This leads to a couple of very serious objections: +1. Testing for a DNL marker must occur in the inner loop of the decompressor's + Huffman decoder; this implies a speed penalty whether the feature is used + or not. +2. There is no way to hide the last-minute change in image height from an + application using the decoder. Thus *every* application using the IJG + library would suffer a complexity penalty whether it cared about DNL or + not. +We currently do not support DNL because of these problems. + +A different approach is to insist that DNL-using files be preprocessed by a +separate program that reads ahead to the DNL, then goes back and fixes the SOF +marker. This is a much simpler solution and is probably far more efficient. +Even if one wants piped input, buffering the first scan of the JPEG file needs +a lot smaller temp file than is implied by the maximum-height method. For +this approach we'd simply treat DNL as a no-op in the decompressor (at most, +check that it matches the SOF image height). + +We will not worry about making the compressor capable of outputting DNL. +Something similar to the first scheme above could be applied if anyone ever +wants to make that work. diff --git a/compat/libjpeg/testimg.bmp b/compat/libjpeg/testimg.bmp new file mode 100755 index 0000000..11aa0cb Binary files /dev/null and b/compat/libjpeg/testimg.bmp differ diff --git a/compat/libjpeg/testimg.jpg b/compat/libjpeg/testimg.jpg new file mode 100755 index 0000000..a026e48 Binary files /dev/null and b/compat/libjpeg/testimg.jpg differ diff --git a/compat/libjpeg/testimg.ppm b/compat/libjpeg/testimg.ppm new file mode 100755 index 0000000..1377eef --- /dev/null +++ b/compat/libjpeg/testimg.ppm @@ -0,0 +1,4 @@ +P6 +227 149 +255 +0/-0/-10.21/51.51.62/72.83/83/83/:3-:3-:3-:3-:3-:2/91.91.80-80-91.91.:2/80-80-80-80-80-80-80-80-6.+6.+6.+5-*5-*4,)4,)4,)4,)4,)4,)4,)4,)4,)4,)4,).+$/,%/,%0-&1.'2/(30)30)63,63,74-85.85.96/:70:70A;/B<0D>2F@2IA4JB5KC6KD4MD5MD5MD3NB2OC3OC3PD4QE5T>1Y?2b@4nB5}E6ŒG8šG9¥E7²F9ºF9¿E8ÆF;ÉF>ËF?ÌG@ÌG@íCNíCLíCLíDKíDIïBFñ>Bõ@â?@×?<Ñ=;µ@.µ@.µ@.´?-´?-³@-²?-°?-­@,ªA.¦A-¢B,A*›A)˜@*—A*’?/’?/’?/‘>,‘>,’<+’<+’<+”?+”?+”=*”=*”=*•>+–?+—@,”?:•>7—=4Ÿ?1©B3³D3¼D3¿D4º?/¶@2­E8žH;‡H9mB2T8*D3#:659549547326216005//50-72/72/72/61-61-50,50,50,.0-.0-.0-//-//-0/-2.-3--5,-4+,4*+4(*7(+=.1E69LUPdUPdUPd0/-0/-10.10.40-51.62/72.83/83/83/:3-:3-:3-:3-:3-91.91.80-80-80-80-91.91.80-80-80-80-80-80-80-80-6.+6.+5-*5-*5-*4,)4,)4,)5-*5-*5-*5-*5-*5-*5-*5-*/,%0-&0-&1.'2/(30)41*41*63,63,74-74-85.96/:70:70@:.A;/C=1E?3H@3IA4JB5JC3LC4LC4KB3MA1MA1NB2OC3PD4P>0U?1^A3jC4xD6†D4“D5žB3¨B3°@2¶@4¼B7ÂC:ÄE<ÆF=ÇG>èAKèAIèCIêDHíDGïBDó@D÷>Cø;Aø9@ö9?ð.‘>.‘>,=+’<+’<+”>-“>*“>*”=*”=*•>+–?,—@-“@8•>5˜>3Ÿ?1«A3µD4½D3ÁC4¼A2¸B6­E8œI;…G:kA3S9*D4$<66;55:4493382271161.61.72/72/72/61-61-50,50,50,.0-.0-.0-//-//-0/-2.-2.-3--5,-4*+4(*5)+<-0C47I:=h<;vDC†JI’LJST§`h¨k{rŽ‘{¢„°|†»y†½lv«[\ŒQHsQBkOFaOFaNI_RN_[Yfnotƒ‡ˆ”™•™ž—š ”™‘ƒ~ojk[]\JVUCXQaXQaXQa/.,/.,0/-10.40-40-51.51.72.72.72.92,92,92,92,92,91.80-7/,7/,7/,7/,80-91.80-80-80-80-80-80-80-80-6.+5-*5-*5-*4,)4,)4,)4,)5-*5-*5-*5-*5-*5-*5-*5-*1.'1.'2/(30)30)41*41*52+63,63,63,74-85.96/96/:70?9-@:.B<0D>2G?4H@3H@3H@3I@1I@1I@1K?1K?/L@0MA1NB2MA1QA2YB2dC2qC3|C2‰A2“@0™<+ :+©;,¯>0¶@4¼C8¿F=ÀG>à?Eá@FãBGæCFêDFðCEõADù?Dú;@û:?÷:@ñ=@è@@ÜA=Ñ@;É>7³@-³@-³@-²?,²?,²?-¯>,®?,ª?-©@-¥@,¡A+A,˜@*—A*–@)’?/‘>.‘>.‘>.=+=+=+’<+“=,“=,’<+’=)“>*“>*”?+•@,”B7–?5š>3£>2­A4¹C5¿D5ÂC4ÂD6ºF9¯I=›I=‚F;gA4P:,B6&=77=77<66:4493383072/72/62/62/62/52-52-41,41,41,,1-,1-.0-.0-//-//-0/-2.-5//4..5,-4*+4*+9-/>24C79_83l?:|E@ˆIB’NK›Z^œft”n‡Œwž€~¯zƒºs¹dm¤UU‰NEtO?lMBbPEcQHcMH^NK\[[estx…‰ˆ‡Œ†Š†…†Š|xzlghXZ[KVTEZT`ZT`ZT`.-+/.,/.,0/-10.40-40-40-51.61-61-61-81+81+81+81+50-50-4/,4/,4/,4/,50-50-61.61.61.61.61.61.61.61.3.+3.+3.+2-*2-*2-*1,)1,)4/,4/,4/,4/,4/,4/,4/,4/,30+30+30+41,41,52-52-52-52-52-63.74/850850961961>8,?9-@:.B<0E=2E=2F>1F>1G=1G>/F=.I=/I=/J>0L@0L@0JD4NE4TD4^D3hE2sB1~A/‡>-Œ9'”9'9)£<-¬@3³E8·I<ºJ>Ù@CÚACÝCEâDEçCDîACô@Cø>Aü;@û:?÷:>ð=@åA?ÚB=ËA7Ã>5°@,°@,°@,°?-¯>,¯>,®?,¬>-ª?-¦?,£@-Ÿ@,œ@+˜@*–@)”@(‘>.‘>.‘>.=-=-=-<*<*=+=+<*<*=+“=,”>-”>-”B6–?5›?2¦@2²B4½C6ÂB5ÄB5ÄF:½H>­K@˜J@|F:aA4K;.?9+@86@86?75>64:5294183073062/62/62/32.32-21,21,21,-2.-2.-2./1./1.00.00.10.5106005//5,-4+,6,-:01>45W6-b<3qA7}D9„H@ŒRQŽ_i‹iƒs˜|z¬u~·myµ^g¢RQŠMDyM?rN@dPEgQFfLC^GBVNLZ^^fjnquzvx}vz€vwzokoa`bUWYKTUG]V^]V^]V^.-+.-+.-+/.,0/-10.3/,40-3/,4/+4/+4/+4/+6/)6/)6/)4/,4/,3.+3.+3.+3.+4/,4/,50-50-50-50-50-50-50-50-3.+3.+2-*2-*2-*1,)1,)1,)4/,4/,4/,4/,4/,4/,4/,4/,41,41,41,41,41,52-52-52-52-52-63.63.74/850961961<5+=6,?8.@9/B:/C;0C;0C;.D:.D:.D:.G;-H<.I=/J>0K?1GH6KH7PG6XG5aF3jD1uB/|?,‚;)‹:'’;(š=,£B2«G7±K<´M>ÒDBÔDCØDBÝEBâC@ê@@ð>>÷:>û:=ú9<õ;>í?>áB>ÓC:ÅA5º?0¯@-®?,®?,®?,­>+­>+¬>-ª?-¨?,¤?-¢?,ž?+š?*–?+”?*“>)?.?.>->->-Ž=,Ž=,Ž=,Ž=,Ž=,Ž=,Ž=,<,=-‘>.‘>.”B4—A4@1ª@3¶B5ÁC7ÆA8Å@7ÁB;¸G?©KCJ@uE;Y>3C9-78*@86@86?75>64=53:5294173062/43/43/32.23.12-12,12,,2.-2.-2.-2./1./1.00.00.3205105104..2,,4+,7./901P5*Y9,e>/n@1tB7|KGƒYcƒg~p—xx¬s{¹js¶]e¦TT”OG‚LAyPAjPAhMAeJA`GBYHEXKKWMPU^bc`fbcha`f\Z`TWZOUYKWYL`WZ`WZ`WZ,,,,,,---.-+/.,0/-10.3/,2.+2.+3.*3.*3.*3.*3.*3.*3.+3.+2-*1,)1,)2-*3.+3.+3.+3.+3.+3.+3.+3.+3.+3.+2-*2-*2-*2-*1,)1,)1,)0+(3.+3.+3.+3.+3.+3.+3.+3.+41,41,41,41,41,41,41,41,41,52-52-63.74/850850850;4*<5+=6,>7-@7.A8/A9.A9.C9/C9-C9-F:.G;/H<.J>0K?1FI8GH6MH5TG6[F3dC0lA.t?-{<*‚;)Š;*“=,šA1£F5ªJ:­M=ÉE@ËFAÑFAÖE@ÞC?å@>í==ó9<ø:<÷9;ó;=ë?=ÝB=ÌD8¼A2±>,«@,«@,¬?+¬>-¬>-©>,©>,¨>.¥>-¢?, ?,›>,—?+•>*“>)‘?)>->->->-Ž=,Ž=,Ž=,<+Ž=,<+‹<+‹<+‹<+Œ=.>/Ž?0’C2—A2 @2­A5»B9ÃC:Ç@:Å@9»@9³H@¥NGNEoG=R@4?;039-A75A75@64>63<4194083/74/63.43.34/23.13.02-02-02--3/-3/-3/.3/.3/02/02/11/11/32032040/2.-1-,4..5//H4)M5)X8+a<,f>2nGBzYb‚lƒ€uŸ{|´u|Àmu¾bi±[[¡SLLBQAnN?jI=cH>`HB^FCX@BO2K?3DG6EF6KE5PD4VC2^C2e@.m>,v=,|;)ƒ:)Š;*“=.›B2¢F7¦I:¿D<ÂF>ÇG>ÏF>ØE>âC?ì@>ó<>õ9:ó9:ï;<å@<×B;ÆD6´A/¨=)©@-©@-©@-¨?,¨?,¨>.§=-¥>-£>, ?.ž?-š?,—>,“>*‘?*>)>->->-Œ=,Œ=,Œ=,‹<-‹<-‹<-‹<-‰<,‰<,Š=-‹=0‹=0Œ>1‘D2–C1¡A3®B6¼C:ÅA<ÇB=ÃB=»EA³PJ¥XPŽZOqSIVI@BD97A6A83@72?61=60<4194083/63.43.43.34.13.13.02-.3-.3--3/-3/-3/.3/.3/.3/02/02/00.11/22021/0/-/.,2.-3/.?0)C1'K3'T8,Z<2dGCw]hƒsˆ­„„À|ƒËszÈkq¿ed°VSšJC‡N>kK5.>5.>5.>5,B8/B8/C9/E8/G:1I<3J=4K?3EC6FB6IC5NB4TA3\@2b>0h=-q<.w9*}8)…7*Œ:,•=/›B2 D5µE9¸F;ÀG<ÈH=ÒH>ßF@èC?ð@@î:9î:9é=;àA;ÑD:¾E4¬A-¢?(¦A-¦A-¥@.¥@.¦?.¥>-¤?-¤>/¢>.Ÿ@.œ?.˜?-•>+‘?*>)>+>->->-Œ=,Œ=.Š=-Š=-Š=-Š1‹?2‘D2–C1¢B4®B6¼C;ÄC>ÄC>¾D?»PJ²[T¥e\‘f]s_TYUJFNC>KA@70@72>71=6094.83-63,63.43.34.34.13.13..3-.3-.3--3/-3/-3/.3/.3/.3/.3/02/.0-00.22022000.0/-0/-10.8,,;,)B1*K7.S<4^IHtbn‡z–Š¸‹Ê‚ˆÒy€ÐrwÈik¸XV¡GD‹I^C@[ABV>DP>EMGQSKWUQ^WU`XS_UR^TT^SV`UaZHaZHaZH,-/,-/------------.-+.-+/.,/.,1-*0,)0,)0,)/+(0+'/+*/+*/+*/+*/+*/+*/+*0,+/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*0,+0,+1-,1-,2.-1-,1-,1-,1-,1-,1-,1-,1-,0,)1-*2.+3/,3/,3/,3/,3/,3/,3/,3/,3/,40-51.62/73081+92,:3-;4.=4/>5.>5.>5.?4.?5,@6-C6.D7.F90G:1H;2F?5H@5J@6N@5R>3W<1\:0a7+k9.t8-|8+…9,;/“=0˜?1›?2¨@3¬B5´D8¾E:ÊG=ÕF>ßD?çB>ë?=íA?çD?ÜE>ÉC8¶C1§B.¡B,¢A.¡@-¢?,¢?,¡=-¡=-¢>. ?.œ<,š=,˜=+•>-“=,=+Ž=*Œ>*‹<+‹<+‹<+‰<,‰<,‰<,‡;-‡;-‰=/†½F@¾C>¾DA»KG·XR¯f]£qfth|rfik^S_SCSHQJBLE=D=5<8/95,74-63,33+43.34.23-13.02--2,,1+,1+-2.-2.-2.-2.-2.-2./1./1.02/02/11/11/11/11/11/11/5*2;/3A32C4/J;6]OOymy‹…Ÿ’‘½”–Ӕ݂‰×tzÈjn¸_b©YZPHmHBdA>]>>X?AVBHVLU^U`bbqnn}xv†|p€ulyoguh_k_T`Ta[Eb\Fc]G,-/,-/,-/,-/---------.-+/.,.-+.-+0,)/+(/+(/+(/+(.*).*).*).*)/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*0,+0,+0,+1-,1-,1-,1-,1-,1-,1-,1-,1-,1-,0,)0,)1-*2.+3/,3/,2.+2.+2.+2.+2.+2.+3/,40-51.62/80-91.:2/;30=4/>50>50=4-?4.?4.?4.B5-C6.E80G:2H;3H>5J=5L=6O>6Q=4V;2Z90_7/h8.p7.y6-‚8-‰9.’;1–<1š>1¢@3¦A5ªB5³E8¾E:ÉF<ÔE=ÜC=âC?ãD@ßF@ÕF>ÄF8±C2£B/›C-ŸB0 A/Ÿ@.ž?-ž?-Ÿ>-ž>.ž>.š=,™=.–=-“=,=+>-Œ=,‹>,Š=+Š=+‰<,‰<,‰<,‡;-‡;-…<-†4†@6‡A7ˆB8‘H7•F7£G:±I@¹HB¹FAºJFµTM²dZªreŸ~op~|mlteYgZJZOPLAKI=EC7@>2=:1:7.44*11)23+23-12,/1,/1,.0+.0+.0-/1./1./1./1./1./1./1./1.02/11/11/11/11/11/11/11/5*:9-9<15?53H?:^VTxszŠˆž‘“º”—Εׄ‹ÓxÆpyºkt¯en¥__yXZsSUjRWjU]j\gmguvr‚v‡€‘‡ƒ•‰}v†yp€sfteXfW_YA`ZBb\D,-/,-/,-/,-/,-/---------.-+.-+.-+-,*/+(.*'.*'.*'.*+.*+.*+.*+-)*-)*-)*-)*/+,/+,/+,/+,/+,/+,/+,/+,.*+.*+/+,/+,/+,0,-0,-0,-0,-0,-0,-1-.1-.1-.1-.1-.0,+0,+1-,2.-2.-2.-2.-1-,1-,1-,1-,1-,2.-3/.40/51080-91.:2/;30=31=31=4/=4/?40?4.?4.A4.C60D7/F91G:2H;5J;6K<7N=6P;6S:5V72[60c60k6.t5,}7/‡9/Ž:0”<0˜<1œ@3ž@4¢@3§A3±C6¼C8ÇD:ÎC<ÖF>ÚG@×HBÍH?¾E:­C3ŸB0™B.B/œA.›@-›>-›>-›>-›>-œ?0˜<-–=-”=,“=.>-Œ=,Š=+Š=+‰<*‰<,‰<,‡;+‡;+…<-„;,ƒ;-„<0‚<0‚<2‚>3ƒ?4…A8†C:‡D;“K<–H; H>­JDµIF´KG´SM¯_V®rg¥qœz{Šwr€ocqbVdWPQCMN@HI;DD8@@4::055+/0(01)01+/0*/0+./*./*//-//-//-//-//-//-//-//-//-//-00.00.00.00.00.00.00.00.6*>6+;8.6;63HE>_^Yyz|Šœ“²’–ÃŽ•Ë„Æ}ˆ¾{‰¸|‹´|Œ°ˆ—yƒq~‡o|‚n}€o‚€yŽ‡ƒ™‹¡”‘¨˜¦”ˆŠƒ–ƒ|{j{iXiW\V<^X>`Z@-.0-.0-.0-.0-.0-.0......---.-+-,*-,*,+).*'.*'.*',*++)*+)*+)*+)**()*()*(),*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*+-+,-+,-+,-+,.,-.,-.,-.,-/-./-./-./+*0,+1-,1-,1-,1-,0,+0,+0,+0,+0,+0,+1-,2.-3/.40/91/:20;31<42=31=31=31=31>3/>3/>3/@3-A4.C60D71E82G83H94I:5L:6M:6N94Q83T50^72e60o6/x8/ƒ90Š:/’;1•=1™?4™?4›?2@1¥A2­C5¸D7ÀD:ÉF<ÌG>ÌIAÄH>¶F:©C4B0—B.˜A.˜A.˜?-—>,™>,™=.™=.™=.•<,”<.“=.=-Ž<.Š=-Š=-ˆ<,ˆ;)ˆ;+‡;+‡;+„;,„;,ƒ;-‚:,;/€<1€<1>5ƒ@7ƒC:…E<†F=’M>•I<œH>¨IC¯LG¯PL¯\Tªj^§€o y˜š‚Žœƒ„–€z‹ym{lam_UYHQUDKO@EI:@D6;=057,13(01)/0*/.).-).-).-+/.,0/-/.,/.,/.,/.,/.,/.,/.,/.,0/-0/-0/-0/-0/-0/-0/-0/-8*A6):3-1961HJ=bfX{€y‰‘“Œ“£–²Œ”¸ƒ³±…™²¤¶ªµ•§§¤£Œ ž‡ž–‚™}˜‰œ‹ˆ£”°š–²›”­—‹£‹…›†’~k|iUfSXT7ZV9^Z=+/2+/2-.0-.0-.0-.0-.0...------.-+-,*-,*,+),+),+),*+,*+,*++)*+)**()*()*(),*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*++)*+)*+)*,*+-+,-+,.,-.,-/-./-./-./+*0,+0,+0,+0,+0,+/+*.*)/+*/+*/+*/+*0,+1-,3/.40/91/:20;31<42=32=32<20<20=20=2.=2.?1.@2/A4.B5/C60D63C84D95G96G96H94K84N51V72_60h70r7/}:1†<1=2>2˜?7—?5—?5—?3šA3£C5ªD6³E8ºE;¿F=ÀG>»F=°D8¤B5™@0–@/–A-–A-–?,•>+•<,•<,–=-–=/”<.’<-=-Ž<.‹<-‰<,ˆ<,ˆ<,‡;+†:*†:*†:*ƒ:+‚:+‚:,€:.;0€<1€=4?6‚B9ƒD;†G@‡HALA’H?˜HA¤KGªOLªWQªf]¥wh¡Œw˜›€’¥‰Š¤‡„ž…|’}t‚qlte\eRV_LMVCEL0-?1.@2/A30A30?61@72@93A96A96B94E74G51O61W6/a6/j8/u9.€0•>7•>5“?5’@4•B4™C4ŸC4¥D4ªB5²C8´E:±E;©C7 @4˜?1•?2“A,’?-“=,“=,“<+“<+”<.”<.“;-’E5:@29<134,22*1.)/+(/*'0**3*+4+,1++1++1++1++1++1++1++0,+1-,1-,1-,1-,1-,1-,1-,/.,;(;5(23+(56$CL-\hDt„`…”wŽ›‰’ž”Ÿšž–¥—•µ¡Æ¤¦Ð¨¥É¯¦Ê°§Ë¯¢Éª—¿‹³ˆ°‹³ŽŽ²Ž²¬Š„¢€€™{wŽrdx]MaHQQ5QQ5RR6,03,03,03,03./1./1./1./1/////////0/-/.,/.,.-+.-+/-..,-.,--+,,*++)*+)**()+)*+)*+)*+)*+)*+)*+)*+)*+)*+)*+)**()*()*())'()'(+)*+)*,*+-+,.,-.,-/-./-./+*/+*/+*/+*/+*.*)-)(,('0,+0,+0,+0,+1-,2.-40/40/:12;23;23<34=32<21<21;10<1/<1/<1/=/,>0->0-?1.@2/;60;62;83<94=:5=:5?82A60F5.O4-W5+b6+n8,x:-<,„<.’:6‘<5=5Ž@4A4‘B3•B2™@0Ÿ?1¦@4ªB7ªB9¥@6?5—=2•?2‘@-’?-‘>,’<+‘;*‘;,“;-“;-‘;,<.;-‹<-‰;.‡;-„;,„;,…9)…9)…9)‚9*‚9*9+~8,}9,=1€=4€@7B9„E>…HCˆKFŠMHŒIAŽGA˜JF¢SOª\X«h`©{n£Žy—Ž©ˆ…¯‹«ˆ~£„€˜€‹w{nixacr[ZhQP]IIUACL;>D60-?1.?1.96/:729839839:4:94;83>71A2+I2*S2)^4(j6)s8*|:*~;+84:5=4Œ@3‹B3A1@/”>-˜<-Ÿ=0¥@4¦A7¢@7œ>4—=4•=3‘@-?,=+<*‘;*‘;,‘;,’<-‘;.<.;-Š;,ˆ:-‡;-„;,„;,…9)…9)‚9(‚9*9*€8*~8,}9,€>2?5€@7‚C<ƒG?†IDˆMGŠOIŒICHD˜MJ¥UT¬a^­ng«s¤•€–¡ƒŠ¬‰‚°‹|«‡|£„™y‚ql{dgv__nWXeQP\HIRAAG9=@579.66.41,1,)1)'2()3)*4*+2)*2)*2)*2)*2)*2)*2)*0**1++1++1++0,+0,+0,+0,+0,+:&27(+4."47=HRb1l~J€’b‰™rŽ|Ÿ‚ŠŸ~Š§{·€˜Æ…œÎ…œÉ¢šÉŸ™Èž”׉¸Š®€‚°‹¶ˆ‚¬~ˆ¯ƒ‡ª€~œvuml„dZnRG[?IL/GJ-DG*/0*/0*/0*01+01+01+21,21,32-63.63.63.52-50,4/+4/+8.,7/,6.+5-+4,*2-*1++0,-0,-.,/--/-,1,+0*+/)*.()./(0/(//(//(//(//)-.)-.*+/+,-,*-,(.-).-)-.(./)./)--/--/---.../-.0/-2.+3.+2-)4,)5.(7.)8/(;0*;1(<2)<5+=4+>5.>5.>5.=4-<3.<1-=2.<1-<1/;0.=/.>0/>0/?11H-&C1';5)2:++=-(=.-;.45-?-+H()R%(X((Z.+Z8.[A2\G6wC-{B.„C1A3’?1•;0–:/”8+“;-‘>.‘B1‘D0‘D0B.?,<*Ÿ63›83”:2Œ<1…@1B0|A/|A/‚C2„A1ˆ>1‰=0‰;/ˆ:.‡9-‡9-v:/|@5u=0n9)s@/s@/t<+{@0{<-ƒ?4ˆD9‹H?ˆLA„NBQC€RC—HK•TRd]…ue{…lw’sz|€£ƒ‰¦ˆŽ¥‰’¤Œ‘¥Œ‡¤ˆy¢‚kŸ{awhŽea†]\zV[sS]mR[cLVTEPH=J;6G53B,/=&,:#+:#-9#/8".#/-#-,$-,&*+))+-(.1'/2'/4'06&14'14'13'32(32(30(3.)-0,-0,)//'=>0WZErx\‹gœs‹žpŒ¢qŒ§r‹¨r‰ªs³{›¾†£¿Ž ¾Œ›¹‡’²€‹­{†ªz„ª{…ª~„§}…¥€€ž|z“vr‰oi{e[jWLZIKO@CG8>B3/0*01+01+01+12,12,21,32-43.63.74/74/63.61-50,50,7/,7/,6.+6.,5-+2-*1++0,+0,-/-./-0--/-,1+*/)*.()-/(//(//(//(//)-/)-.*+.*+/+*-,*.-).-)/.*./)./)./)..0....../-./.,/.,1-*3.+3.*5.(6/)8/(90);0*<2)=3*>5,>5,>5.>5.>5.=4-<3,=2.=2.<1-;0.;0.;0.=/.>0/?10F/'D0)A3*=4+96-85.83-<1-?-+D*)K)(P*'U.)[4-_:1c?3s@+xA-€A0‰?2‘?4”;3”:1“;19.‹<-Š>.ŠA0‹B1B/ŽA/@/š93—:3’;2‹=1„?0‚@0@/?/„A1†>0‰=0‰;/‡;.„:-‚:,‚:,w9.x<1s9-n9)r?.s>.q9*u:,}=1„@5‰E:‹H?‰K@†MB„PCQC›DJ›QR–d]vfƒ‡p}”w~ ƒ¦…ˆ§ˆŽ§Š’¦‹“¥Œ£‰‚Ÿƒwœ}o˜xa•g\`VƒZU}XWyXWpSPbJKVECI;@A998340-0,+/+,.)--(,*,+)+***,+),-(,/)-2(03(03(02(02(10)1/*1-*1,+3,+32-12./0,)--%9:,TWBox[€‹i‡–o†™l†žnˆ£p†¤p„¥pŠ­w“¶€›¹‡˜¶„“³Œ®{†«xƒ§w‚¨yƒ¨|ƒ¦|„¤{x’uqˆnh{eYjWL[HGK<@D5:>/12,12,12,12,23-23-43.43.54/74/85085085083/72.61-80-80-7/,6.,6.,3.+2,,1-,1-./-.0.1..0--/,+0+*/*).1'//(//(//)-/)-/)-.*+.*+0,+0,+/.*/.*/.*0/*/0*/0*/////////0./0/-1-,1-*2-)4/+70*90+:1*<1+=3*>4+?5,?6-?6-@7.@70?6/>5.=4->3/=2.<1-;0.;0.;0.;0.<1/=20C2*E0+H/+L,-N+/M*.J*/E+.A-,@.*@/(C/(M/'Y0*d1-j30i;+o;-w;0=4‰<4Ž;5Ž94:4‹;2‡=2†>2…@1†A2‰A3ŒB5C6‘=2=1Œ>1Š>0†>/…=.…=.†=.ˆ<.‰;.ˆ:-‡9,„;,€;+~=+z=*}=3z<1v:/u;-x@1x@1v<.v;-?3„B6ŠF=‹H?ŠJA‡KA‡NC†PDDHQQšc^’ug‰„n‘t~}€¥ƒ„©‡ˆª‰©Œ“§Œ‘£‰‹ƒ„˜€”{a›k[•eXaV‰`W…`W]QtVMiPC[E=RA6F9/<2*5-&1+%.)$-(1&*1&*1&*1&*1&*1(-2).1+//*0-+0,+0+,0),1(-1&.1&.14.24.0.*'**"66*PUAmv[~‰i€k~“h™jƒŸn€ n~ m€¥q‡¬xŽ®|‹­zˆªw„©v§t€¦u¦w€¥y¤y€¢}}›yw’sp‡mh{eYkUL[HEG:=?28:-23-23-34.34.34.45/54/54/650961961:72:72:51940940:2/91.91.80-7/-4/,4/,3/.3/.3/01/01/00.1..0--/,,.2).2).2).0*.0*,0*,0*,/+*1-,1-*0/+0/+10+10+10+10+11111100010.10.2.+2.+3.*91.92,;2+<3,>4+@6-@6-A7.A8/A8/B90A8/A81@70>5.?4.=2.=2.<1-;0.;0.<1/=20=20?5,E2.O-.W(0]#/\"0W#/L'.C/.:3-55);5)E1(U.'c+*l*+e;/j;1s=3}<6…;8‰;9Š;7ˆ:6‰>9†?9…B9ƒC9…B9†B9‡A9‰@7†B/†B/‡@.‡@.‡>-ˆ<,‰:+‹9+‹8*‹8*ˆ9*…9)€<)z=(w?(t@(ƒ=3{7,x8,z3/>3/=2.=2.=20=20>31>31>7/C41O/2Y*2_%3`#2Y%1N+1B3077-39+68*?5)N1)]-)e+)c;3h<3r=7z=:‚<<†<=‡;;…;:‚;9>8€A:C;‚C<ƒB<…@9„?8E/D/C.ƒ@-†=,‰<,‹9+Œ9+Œ6)Š7)†9)‚;)~=)w?(sA(qB(…6/|/'8/ƒ?4w5)s5*}A6}C7E9G<ƒI>„J?…K@‡LDŠOGŒSJycL~hSoYu]}bˆi„•u‚ |¥~|©€~¬…­†€ª„¥€|ž}{˜yn}ŽlyŒlwŒkwŒmt‰joƒgl~dbqZ[hTSZHIK=B@4=6,8/&5+":&(8%'6&'2&&0(&-)(++)).*'+*&,*&,*'+*'+,)*,**,**,-#$2*(50,85,BC5UZFfpWn}^tˆcqŠbt‘ex˜iw›ks™hs›iwŸmz¢mx lwŸkv¡ly£q{¥u{¥w|£wxžuzœww–tqŽom†hd{_WkPJ^CFB9>:195,560560671671782782872872983<94=:5>;6>;6?:6>95>95?74?74>63=52;62:5294194184184195484373243132021/6-.6-.6-.6-.6-.4..4/,4/,40-40-40-52-32-32-43.43.431431542540841850940:5/=60?6/@7.B8/C9/F90G:1H;2F<3F<3F<3F<3E;2C90B71A60@5/@51>50=4/=4/>42?53?53=82A64I35Q16V.6U-5R/5J22A62::08<.9;-?9)H6*P4)U3)]2+c4.k62t76}77‚89ƒ7978}75{:6|=8{?7@9ƒ@:…@;†?;|E0}D0€C0‚A/…=.‡;-‰:-ˆ9,‡8+…9+‚:+<+{>+x?+uA+tB+‹2,‹2,¡LE§XQŠA8|90‚F;€J>yH:zJ<{M@|NA~NB‚PE‡UJYN_uNgwRtzX€{^Š|b“i›s›—|™zˆ |ƒ¨¬ƒ|¬‚x¨~t£yq vŠpˆo†nƒŽp€p}px‹ms‡kk~bgu\_iQWZGPM0%:,+7,*5+)1,(-,'+.').((/().(+-*,,*/+*3)*6',7&,9&,2)$<3,E>4JF:QR@]bLgqVizXmƒ]j…\j‰]p‘bq•eo•do—eršhu krhq›itžlx¢rz¤vy¢vyŸvvštw™tu”rokj…fc|^UlOJ^BHA9@91;4,671782782782893893983:94:94=:5>;6?<7?<7@;7@;7@;7B:7B:7A96@85=84=84<73<73<74<74<74;74:6395284173080.80.80.80.80.80.61.61.61-52-52-52-63.63.54/54/540540651952:72=84=82@93?80A8/C90D:0E;1H;2I=1I=1H>4H>4H>4G=4F<3D:1B8/A60B71@70@72?61?61@72@72A83=84@85B86D97E:8G96G96E:4C90B90B:/B:-D;,F:*H;*H;*].&b0)n3/x73ƒ98‰;;Š<<‰>;‹A>†A<?6}=4~;3‚;5ˆ=8Œ>:~C3€B3€A2ƒ?2ƒ=1„<0ƒ;/;/;.|=.{=.|>/|>/|>/}>/}>/—.*£;8ÎkfÙ~y­ZTŒC<ˆLAN@tJ:qM=pQ?qR@tSB{VD‚[J‰_OUOe€Uz~[‘y_¥ra³of»rk»xo¶…vªz ›~•£€Œ¦ƒ¦~}¢yyŸvŒr‹rˆ‘r„“r€•t|–sv”ps’pl‹ig„eby\\lQU_GMP;ED0A<)>3-<3,92*41(01).1(+1'+0)/0*2/*6,*:*+@'+D%+G$+H#+A7+LC4WP@[XE`bLgmQiwVj{Wl‚[g‚Wf†WjŽ^n”an”an–bršfržko›hnšiqœnw¡sy¢vxžuu›ts—su—ts’pn‹li„cb{[TmMH`@MD=E<5@707827828938938939:4:94:94;:5>;6?<7@=8@=8A<8A<8A<8A<8A<8A<8@;7?:6>95>95=84>95>95>95>95=84<73:51940:0.:0.:0.91.91.91.91.72.61-61-63.63.63.74/74/74/540651961;83<94?:4@;5B;3A8/B90C9/E;1H<0I=1J>2K=2K>5K>5J=4J=4F<3E;2C90B8/B92B92A81@72@72@93A:4A:4?74>95=<7>?7?@8@@6D@5J=4J70N5.Q6-Q6+O8*M:+I<)H=)l3(r6,~;3‰@:•DA›HDŸJGŸLH QJ—MDD;„;2‚8-…7-Œ91;4…?7…?7†=6…<5ƒ=5€=4|>3y?3vA3uA3uA3y?3}=3ƒ:3‡83Š73Ÿ%$´<;í{zþ•’Åhc–G@‰K@wI:mNfW@jX@r\E}aL„eQj{O{{U™w\´l`Ì^_ÚR\áM[àO^êmuÜxxÎ…~¿€²–€§—}ž•x˜“u•Žr”r‘‘u”u‡–u—s{–sx–rq‘lp‹hiadtW]gLVX@LJ3GB.L40H3.D3,?2*:1(70&40'40'81):/+?-+C++H(+M%-O$-Q#-PE1[P:d^FgfJilOnuTm{Wl~Vk„Zg„Vg‡Vm]p•ap—br™dvhrœlo™km—ip™mwtyŸxw›wt–us•tu”tsqoŠki„cb{[TmMGa>SJCKB;F=69:49:49:49:49:4:;5=<7=<7=<7?<7@=8@=8A>9C>:D?;D?;E@8C>8D=7B;5B;5B;5B;5B;5B;5A:4A:4A83A83A83@72@72>71>71>71<71<71;60:5/85085074/74/761961961:72<71=82A:2B;1C:1E;1F<2J>2K?3L@2N@3N@3M@7M@7L?6K>5I<3F<2E;2E;2B90A81A81?80?80?82@93@93<5/LE?IB:E<5OB:K:2J3+\>6Z5-`5.`4+^/'\0%b8,g@1gB2‹I;G;–I?žLAŸF>›>7š=6žD;¥ND£QE¨VH«YK£PBš@5˜:0ž=4’9;9:Œ67†54„96ƒ@:{@8o?3oC6lB4m?2u:274Œ35’-3–(1ÏEEèbaÅEDÍWUáyv«VO†F<‚WGlS=f\CedFgfHgbEm_DyeL†nVŽdK­p]ÍphÞW]å8Kð(Dü&Hþ+Lþd02b22\31L)'D'#I2,J70F5.E2,E0+H0.I-,I)*O+-V24VK/`W:f_BgdEkoLu}Xu„]oWj„WlˆXnŽ]q“`s•bu˜bušdv›eq–ks˜ms˜oq•os•rw™xz™zy–zx•yqŽrm‡jj„ghƒdazZTnKIc@TKBSJAPG>9:49:49:49:4:;5;<6>=8?>9>=8@=8A>9A>9B?:D?;D?;D?;FA;E@:E@:E@:D?9D?9E>8E>8E>8E>6E>6D=5C<4D;4D;4C:3B92B92B92B92A81A81@91@93>71<71;60;60:5/85.74-74-96196/96/;60<8/>:1A:0C:1C;0E;1G=1J>0L@2M?2NA1NA1N@5N@5M?6J=4I<3H;2E;1E;2C:1B90A81@91@91@91?;2?;2C:3G81I0,V..j68u99{;;†ECƒD?„H@…I?†G>ŽJA›NH£PL¥MK’E3”C2šB4 B6 >36-7+¡<0£C5›@.™@. E3¦F6©E5¯H9¸N@´KR¯GN¥@F™9=‘8:Š?<€A:r@5k?2uK=€NC@:‚,-“(0µ8FÒK\àJIáMMÌ>=Ã>?Ò_\µXQ„@5€UDvbJa]@Z_?ekIonOshJ{fK†kPÌ]VÚ][êSZó7SD=]P.dY9ga?ifCnrMz‚[z‰bt†^r‰]oŠ]oŒ^qŽ^u’bw•cw•cw•cr’mw—rz˜vy–w~˜}ƒ„…‡ƒ›…™ƒz’|q‰ql„jhc`yYTnKJdAWQEVPDUOC8938938939:4;<6<=7?>9@?:@?:B?:C@;C@;C@;D?;D?;D?;FA;FA;FA;E@:E@:G@:G@8F?7IB:HA9H?8G>5F=4E<3E<3D;2D:1D:1D:1C:1D;2D;4D;4C<4?80?80<71;60:5/:5/94.94.96/96/96/;7.<8/@9/A:0C;0E;1F<0I=/K?1M@0M@0NA1M@0N@5M?4L>3K=2I<3H;2E;1D:0C:1C:1A:0A:2?;2@<3@<3A=4SE–I?•MA›OB¬RJÃSRÏNSÒENœE2B0 @0¥?1¦:-¥7*¦8+§=/¬E4¡>+˜7$:%¥>+®@/³B2¹C5§/8±9B¹DL¾KR¸NRªLL“B>}:1u;/q9,s5*2-›47º8@?:A@;BA4G=3F<2E;1D:0D:0E;1E;1D;2E<3E<3E<3@91?80?80<71;60:5/:5/:5/96/96-;7.;7.=9.@9/C;0D<1F<0F=.J>0L?/M@0M@0O?/O?/O>4O>4N=3K=2J<1G:1G:1D:0D;2D;2B;1B;1@<3A=4A>5A>5Q9/X+&‰:?ÅP`ãOeñOfíPcÐGO¢20”:/Ž?.–C3®F=ËFGÞ>Hã2B§H6§F5©B3®@3°?1²>1³B4´D6²G5«B/£<)¤;&©<(­:(¯5&®3$¸7<»8>½7>½6=¿9@?:BA4G=1H<0G;/E;/E;/E;/E;1E;1D<1D;2D;2@9/@91@91?82<71;60;60:5/;7.;7.;7.<8-?8.A;/C;0D4N=3N=3J<1I;0G;/F90D:0D<1D;2B;1@<1A=2A>5B?6C@7_4-t42¯KSâYiðH_ð:Qá2C½#+¬/)š9(;&•=)¬@3ÈA=Ý:?ä0;¨D4¨B3«?2®>2´?5¹C7½G;»J<¬>/ª?-¨=+¨:)ª9'²:*¹;-¼ÃLDËTLÑTNÙKJÝ>Cã3>è.<Ù5+Û7.Ò0+Ò94Á82µ@9µ[P”UDxO9~dI„lPbF]F®eTÍqdÛsjübÿ?eÿAiÿBkÿBmÿAmÿ@oÿ@oÿ@qÿAqÿBnÿ=hÿEmÿJpöGhíMièZrÛbs½YcŒ@D]($M-"PC2PR=CO76H.WH1eYCujT€{gŽy˜œ‹”Œ‡”ƒ~‰—ˆŽœŒ™ˆ‡’‚Š“‚—žŽ¤¨—²¶§¸¼®¿Á¶ÀÁ¹ÂþÅÅÃÃÃþ¾¾²´³¢©¢—Žy‡vh{e\sWTmONiHTYBUZCW\E560560671782893:;5=<7>=8@?:B?:C@;DAGB>GD=GD=HC=ID>IE0I=/G>/G>/F<0F<0E;/E;1D<1C:1B90A:2@91@91?82<71;60;60;7.;7.;7,<8-?8.A;/D0K?/M@0NA0P@0O?/O@-P>2N>1M<2L;1I;0H:/F90C9/C;0B<0B;1@<1A=2A?3B@4C@7t50–FEÆY_ßUbã@Qä5FÚ0;À*+¯1%Ÿ9#•;!”: ¡=&·=.Æ90Ê2- :,¢:-¥9-¨6,°91¸A9»E;·E:­?2«@0§<,¤6'ª6)·=0ÄD9ÊG=¾9*Î@4áD=ïA@öDâ<@×?>ÎC>ÍJB×RMåZWéPRìELï;Gõ6F÷2Dø/Bû1Gÿ6Lø:Tø:Tø:Tû:Wþ=\ÿ?aÿBeÿDiûhú?júAm÷@nõ?oò>mï=mÿFnÿ:aÿ>dÿInÿJløMmòSoæXnëp‚Å_j˜ILt:6\6-O9+OD2SN:`PArdWˆ|p”Ž‚Ÿœ“¦§¡¡¦ ”˜”Ÿ›¨¤¦¯¬¦¬ª¤¦¥§§¥µ´°ÄÀ½ÍÉÀÒÍÇÕÐÌ×ÏÍÖÍÐ×ÎÓÑÊÑËÆÌ¿½À°²±˜Ÿ˜€Œ€m~k^u[VoQSlNU_DV`EWaF560560560560671893:94;:5=<7@=8A>9C@;DAHC?HC?GD=HE>ID>ID>JF=LE=MF2G=1F<0D<1D<1C:1B;1A:2@91?82?82<71<71<8/<8-<8->7-@:.B:/D2B@4@@4+)¨JKÁSV¾=BÀ/6Ç.3Ä./»0)ª1 £9!›=!–=˜= ¡=#¥;#¦6"6- 8/¢5.¦3,®71·@:¹B<²@6±B7­A5¨7È`UÑq¤eSŽWC‡N:¡XGÊe[ãa_ëPTëBIùDKí@DÞ@?ÑB<ÅB8ÁB9ÌIAßPLìKPô@Kù9Hý7Hþ5Hø3Eö7G÷=K÷9R÷9Rø7Rú7Uý7Xÿ9]ÿHC?ID@HE>HE>ID>JE?JF=MF>MF2G=1E=2D<1C:1C:1A:2A:2@93?82<71<71<8-<8-<8-?8.@:.B:/D2??3@@4”67Á]_ÈZ[¯78®,,µ/,±,#°0#¯8$®B(©G* G'šF$šF$–C!”? Ÿ81£;2¦92¨50°:6¹B>¹D=±>7«<3¨<2¦»72»:Ê<$á:*ñ.(ÿ$&ÿ'ÿ'ÿ%ÿ%(ù,)ñ2*ë5*è3(è2'ê/&ì-%Ü=(Ñ2Þ>0Ñ5)Ê7/Â?7¯C9Çqd²m]–YF™VE¿i\ÝlfãSSë@Hù?Lï4¹6,½4.Î44ïBHø8Gÿ2Fÿ3Hÿ5Iú7GöYÿ=Xÿ:Wÿ6Wÿ5Yÿ5\ÿ6_ÿ7eÿ;kÿ:mÿ;oÿtû>vôEbýNkÿTqúIfð?\ÿRqÿfƒÿf€ô^wêbváky×s{Ärvªfe”ZV‰TN’€~¨™–¾°°Ä»¼ÆÁÅÈÇÍÅÈÑÀÄÏÆÌØÈËÚËÍÜÓÐáÚÖåäÜëêßïîáòòäãõççöçêóâèñàêïßêìÜéå×äÓÉÒþĪ¬©—y‡vi|f`w[\uWbqRapQ`oP201312423653875984984983;:5<<4==5??5AA7CC9EE9EE9HH@HH>HH3B90E<5C:5@85?74@86?67>56:44F85E76B87@78>:;<:=<<>==????A@,§B0©D2©D0©B/¨?,«>*­<*µ=-¾C4ÅF7À>0·3&Í6+Ì8,Ì:-Ì=/Ï=.Ô(Þ9%Ô4Ï4 Î9%Å8&¾6&Æ@4ÕQEÒIAÜMIïUUüVXýJPø9Aü4?ÿ9DäCHßCFÓAAÆ?;¹=3®=/ª?/ª@0¿Q@ÉQCÑLCØC=å??÷@Eÿ>Gÿ8CúGMúENûEQþESüARú=Sü>XÿCbÿGiÿBhùHH7H?8F=6C:5C<6A:4?74?74@85>95=84;63>3/=4/>42<74=98<;9=<:>=;@?;C@9G@6J@4L@0O@-P?+P>(=B,?A,E=0H92K63J46F35A57>=;8=69?5?A4C=-J9)^B4sRC¼K=¬;- 2#¡6&£:'8$ž9%£?(¡;%¦=(­@,³@-¶=,·9*¸6(¹5(¦;+¤:*£9)¥;+¦?.©B/«B/«@.­?.«:(±<+¿E6ÆH9Á?1¼8+½7+Ï5+Ï7,Î:.Ï;/Ó=/×;/ß8/ç4/ð0-õ--÷-+ò/+ê4)ß8(Ö;'Ï=&á:'Ù7"×8%Ô=*Ì;*Á5&Ã;/ÍG<ÐG?ÙJFèPOóPQôGKò;@÷:Aÿ?GàDGÜDCÓB?Å>8·;1¬;-ª<-©>.µF5ÅM?ÓNEÜGCã?@ñ>Bý>Fÿ>H÷DJ÷CLúDPÿFTýBSú=Sü>XÿBaÿFhÿCiü?iù@lùBpûGvüJzþL|ÿIxÿHtõKpðRsò]zö`{ùXwýMqÿCkÿAlóCjÝJgÉ^p®pugNI†‚v´”‡Ì²¥äÔÇëäÜèéäéêîéçòíáõöâûýàüÿâýÿçþÿìÿÿòþÿ÷üþúûþûöýúõü÷ôúôôøïðôëîñèëïæëäÞâÜÖØÊÆŲ²°ž ›Ž“Œˆ…ˆ…–†‰€†}/.,0/-10.21/43/540762761:94::2<<4>>4@@6BB8CC9DD8IF=IG;JH;KJ8MJ7NL7NL7OL9KI:NKBTSQ_^dihxmm…lkŠihˆcYd[QZQGPJ@IH>FG>CC=A@::1>:1=90:3-94.;60=82=:3>;4?<5?<3C?4F@4I?3L@2O?0P?-Q>-P>*3@&7?'<=+A;-B8/A62>42;31=85B:7H94O2.[+)o-.Š:= EJª9+¢2$Ÿ1"¤9'¥<)ž7$8$¢<&¤;&¨=)±A-¶A/¹>.»<-¾:-À:.®>0¬<.©9+¨:+ª<+¬>-­>-¬=,²?-®9(¸>/ÊL=ÊH:¼6*º2&Å;0Ó5*Ô6+Ò8,Ô:.×;/Û9.â7/é2,ñ/-õ.+õ.+ñ0)ç2'Ý6&Ó8$Ì:#à7$Ü5#Û8'Û>-Ó=.Æ7)Å8.ËA7Ç<5Ì?8ÙEAåKIìIJëCCí?Að@CÜDC×C?ÏB;Â=4¶:.­9*ª;*«<+ª9)¿E8ÔNEÝIEâ?@ëXÿ@_ÿDfÿCiþDmÿFpÿIwÿK{ÿL|ýK{ÿCvÿGwÿJtúNtþZ|ÿa€ýUvòCdüHkÿRvÞ=\ÎH`Úz†µ}~\F;„r³‹Õ³§óÛÑúíåøóðøøú÷ôýôëüüêÿÿéÿÿëÿÿíÿÿòÿÿ÷ÿÿûÿÿýþÿþúÿýùÿûøÿøöþõöýòöûðôúïóðçêåßáÓÏξ½¹­®¨¢¥œ£™£—¤ªœŸ¥—œ¢”/.,/.,0/-10,21-32.54/650872991;;3==3??5AA7BB8CC9IE<0?=1@<0?<-A;+F?/H?.K?/M@/O?/P?/Q>/P=.<@)=?*?>,?<-?;0=:3;:5:94<94D95N43[*-o&--8¨3C¶7H§7)¥7&§9(ª?-¨?, 9&Ÿ9#¤;&¥:&«<)³>,¹@/½>/Â<0Å=/Ç=0¹@5¶=2²:,®8*¯9+°:,²:,²:*¶;,¹;-ÄB4ËE9Ç?3¾1'À2(Ê:1Ú3+Ø4*Ù7,Ú8-Ü8.ß7,æ3,ì1,ó0,õ.+õ.)ï0(æ1&Ú4$Ñ6 Ê8Ü/Ú0Ú4$Ý;,Ø4¾Vßetû §Í‘]=2aP@©wlÑ¥œöÔËþêãÿôòÿþÿÿüÿùóÿüïÿÿïÿÿðÿÿòÿÿôÿÿ÷þÿûýÿüûÿýùÿüøÿúøÿù÷ÿö÷ÿôøÿôøþó÷öëïìãäÚÔÔÉź¹´³´¬±´©²µª¶¾³°¸­¬´©10,10,0/+0/+10,21,43.54/77/880991;;1==3??5AA7BB8KD:LF:OG:QJ:RK9SL9RM:QK=OKBVTUfdowx††¨»“ÃŽ‘ÆŠÀ‡‚¸{w©rlœid_[~UPnNJaJGXEBM?=B;7696196-86*86)581692891;;/><-?<+C<)D<'I>*J?+L?,M@/M@0M?2M?4L>3M?4K?3F<2B90=909:25<44>57<5>:1H3.\0/{48œ;D¯9E²2Aª<+ª<+«@.¬A/©@-¥<'¥<'©>*§8%­:'µ<+¼=.Á;/Å;.Ê<0Ì<1ÁA6¾>3º:/·7,·7,¸8+¸8+º8+»7+ÇA5ÍC8Å8.Á1&Æ3)Ë7-Í6-à2+ß3)á5+â6,ã5,ç4-ê2*ð/*ö/,ø.*ô/)ì0'ã1#Ù4!Î6É7Ú/Ù/Ù2"Ù5)Ù9-Ô:0Ö?6ØE=ÕF>Í@9Ç<5Ë@9ÖKDÙNGÐF<Å;1Å=1Ä<0ÀCí>EóBJûJTÿJYýFXúCYýB]ù@_ûBdþFjÿJsÿOxÿOzÿLyýIxÿGwÿRÿQ}ÿIqûImÿStÿVtøNiëD^äF]èYkÿ—¢ÿ¶¼î žˆKFd2)©jcÍ–ôÇÁÿãÞÿòðÿüýÿýÿú÷ÿý÷ÿÿöÿÿöÿÿøÿÿùÿÿüÿÿýýÿýúÿüøÿûøÿúøÿø÷ÿ÷øÿõ÷ÿôøÿôøýñóóéêäÜÚÖÑÍÍÊÃÉÉ¿É˾ËÍÀÇÑȾȿ·Á¸84163.52-30+30+41,52-63,85.96/:70<90>;2@=4B?6B?6KC8ME:PF:SJ9TK:UL;SL<=;:6;8396/267465672880<:-A<)D>(G?(I?&J?)IA,JA0IA4IA6HA9G@:R9?ž46§<*¨=+ª?-ª?-©>,©>*¬?+¯@-«8%²9(¹:+¿:+Ã9,É9.Î:0Ò;2É>7Æ;4Ã81Â8.Â8.Ã9/Â8.Ã6,Ä7-ÑC9Ò?5Ä0&Ã,#Ð7/Ö<4Î4,æ1*æ1*ç2)è3*ê3+í2+ð/*ó.(ø.*÷-)ò/)ì2&ã3$Ø5"Ï7 Ì7Ü5#Ù3#Ø2$Ö2&Õ5)Õ7,Õ;3Ö?8ìYRáRJÓHAÊD;ÉF<ÊJ?ÅG;½?3¼;(¼;(º;*¹:)·:(¸:+¼>0¿A3ÁA6Á<5Å<6ÏA?×EEÝGIãJMèMQëADì?EðCIúJTþN[üJZüF\üF]øA]ùBaýEiÿJpÿNwÿOzÿMxÿKxÿR{ÿR{þOvýOtÿVwÿ]{ÿSoîD^øUjîQd÷dtÿ’žÿ‹“òƒ‰Ç`c­KL²keÏŽˆñ¼¶ÿÞÙÿðìÿúúÿüþýûÿüûÿþûÿÿûÿÿûÿÿüÿÿûýÿûûÿûøÿûøÿüùÿûùÿûúÿøúÿöøÿòõÿðóûìïòææçÝÛßØÒÛ×ÎÝÛÏàÞÑàáÓÚãÞÏØÓÅÎÉ<94;8385052-41*41*52+63,74-85.96/;8/=:1?<3A>5B?6KA7MC7RF8UI9WK;WK;UL=SJASJK[Xcnl‚‚‚¨‘”Çš Þž§ì¡©ò¡¤óž í™›æ•˜ß”•Ö̈‰¿‚ƒ±zz rq‘fd|XWiPN\IGRFCJDBG=?K==G;:?;:8<92A;-D=*F@*F@(GA)GB.ED2CC7BC=AC@>BAG9HH,©>,ª?+­@,¯@-°?-°=*±8'¶8)½9*Ã9,È8-Ì8.Ò91Õ;3Î;4Í:3Ë81Ë81Ì92Í:2Ì70Ë6/Ó<3Õ>5Ò91Ì2*Ð3*Ù;2Ú<3Ó5,è0(é1)ì1*î1+ñ0+ò/)ô-(ö,(÷-)õ.)ñ0)ê2(â5%Ù6#Ò7!Í8 Õ8%Õ8%Õ5%Ñ4%Ò4(Ô6+Ô7.Ð7/ãNGèXPçZQØRIËH>ÃE9¼B5·?1¹<&¹<&¹<(¸;'¸9(º;*À>0Ä@4ÉD;Æ?9É@:ÑFCÕIHÖHG×IHÛJMìCFêADíDIöKSüQZýN]ûL]üJ`öD^÷DaùFfýIlÿNuÿOxÿOxÿNyðYzðWvóVuüYxÿ]{ÿZuûQkòI`ýWköUgêN\ö^kâKZçSaçSaåQ_¸jfÉ‚~窧ÿÓÑÿëèÿôòÿøùÿÿÿùýÿùüÿûüÿüüþüúûýùøüøõü÷ôÿú÷ÿûøÿüúÿûúÿøøÿòõýîñúëîðââëÝÝäÙÕâÙÒæßÕëçÛñîßóñâêóðÜåâÏØÕ@=6=:3:7074-52+52+52+63,74-74-96/;8/=:1?<3@=4A>5M@7OC7RF8WJ:XK:YL-C@-CB.BC3AE7>E=€UE’YFL7A+“A+«@,®A-®A-®A-°A.²A/²=+°7&µ7(¼8)Â8+È8-Í6-Ñ7/Õ8/Ù;2Ò73Ñ61Ñ61Ò72Ô94Ô94Õ81Ó6/ÞA:Ö8/Ñ3*Ø7/Þ=5Þ=5Û8/Ù6-ë0'ì0'ï0(ò/)õ.)ø-)ø+(ø+(ø-)ô/)ð1)é4)á5'Ù8&Ó8$Ï8#Í8$Î9%Î7$Ï6&Ð7)Ô8,Ó7+Î4*Ì3+ãNGôd\ë`YÔOFÂB9¸<2´:/·?&¸>&·=&¸;%º9&½9*Á;/Ä>3ÌC9ÊA9ÎE?ÕKHÓLIÎGDÌFEÐJIéFGæCDéDHòMSùRZùR\ùN^úOaõG^õGbøGdûIiÿNrÿRvÿRyÿRyå[uë\xõ`}ü_|øUpõMgùPgÿYnÿ[mÿbsóL]úSdøM_ÿRgüI_ýE]³d`¾tqÚš˜ûÈÅÿåãÿîëÿõôÿÿÿûÿÿùÿÿùÿÿúÿÿüþýýüúýùöýøõÿøõÿùöÿúøÿúùÿööþððøêêõåæìÜÝèÚÙæØÕèÞÕðèÝùóåþûêÿþíòûúâëêÔÝÜA>5@=4?<3=:1;8/96-74+63*52)52)63*74-:70=:3@=6B?8J@6OC7RF8VI9WJ9XK;ZL?[NHTIMXR`gd|}©’Ì—Ÿçž©ù¤°ÿª³ÿª³ÿ¬³ÿ«³þª±ùª®õ¨«î§«êŸ¡Ü™šÒÁ±ur¡he’]Z…XR~YP{YQxVOpOG_E?M?:@?;8@@6>>2@B5@F:>E=:C>9CB*®?,±@.³@.´?-¶=,¹;,º6'¿5(Ä6*Ë7-Ñ7-Ö8/Ú91Û81×84Ø95Ù:6Ú85Ø61Ø61Û83Ý:3æC<à=6Ú70ã@7þ[Rÿlcÿ]Tã@7é1'î2)ò1*ô/)õ*&÷'%ø(&ú*(ø-)ó0*í2)ã1%Ú0#Ó1"Ò5$Õ:(É=&É=&Ë=)Ï<*Ñ;,Ò9+Ô8,Ó6-Ú@8Ð71ÜGAôc^ãXQÉB<Å@9·3.´<#¶<$¹<&º<&½:(¿:)Ä<.Ç=2È>4ÌC;ÙPJßXTÓOJÁ@;¿@:ÊKEäFEäFEèJKïPTòQWïNVïKVñL\ùRdøOf÷Ke÷JfüMnÿRsÿRvÿPtê[wêZuðZuú[wÿ]xÿZsÿWnÿViÿctþVgÿ\mÿYlõDXùBXÿMeÿIb·nh­hcËŽ‹èµ²ùÑÏÿêéýïîúù÷øþüøÿÿøÿÿøÿþúþýþþüÿûøþöôþùõÿû÷ÿùöÿöôÿööÿõõöèèç×ØäÔÔÞÐÍãÖÐñçÝüôçÿøèÿüéÿÿí÷ÿÿèñðØáàC?4B>3A=2?;0=90;7.:6-95,73*73*73*83-:5/=82@;5B=7I?5LB6QE7UH8VI8YI9YK>ZMEUKLXP_ebyz¦‰É”œäš§ö ¯ÿ«´ÿ¬µÿ­·ÿ¯·ÿ¯·ÿ¯¶ü¯³ú¯²÷§ªí¢£ä˜˜ØŒŠÉ€~½uq®ie¢b^›cVŽbU‹]TƒWOtNHdFCTBAIAAA;=8@C9ß<7ß<7â=9æA=èC=éB<èA;ç@:èA9ä@7Ü8/Õ1'Ø6+ëI>þ\Qô?4î6,ê+#î)#ù,)ÿ./þ,-ø((ú0.õ4/ï7/ç6,Ü4)Ö2&Ó3%Ò5&Å='Ç<'É<(Ì;(Í:(Ï7)Ï6(Ð4(Õ8/Ï5-Õ<6åPJçSOÛLHÏA?º/,¹=%º>&»='½<'¾9(À8(Ã9,Ä:/È>4ËB:ÕOFÜWPÒQKÃD=¿B<ÆKDáIFáIFåMLëSRíTVëPVéNVìOZ÷VføUhùSiúRküRmÿSqÿStÿRsïNoøTvÿ\|ÿ^{ÿ[vÿUoýQgûReüUføQbÿZhÿZjôM^úRcÿWiôI\§ha™\W·€{Ù©¥ïÇÅýáÞùêçýøõøýùøÿÿ÷ÿÿöÿýùÿýÿÿýÿûûÿö÷üùòþùõþùõþöóÿ÷õÿõõøêéêÜÛäÖÓÝÐÊáÔÌïåÙüõåÿùçÿýéÿÿì÷ÿýèñîÙâßEA5EA6C?4A=2?;0=9.<8-;7.84+84+73*83-:5/=82?:4A<6G>5JB7ND8RF6TG6WG7YI:YKBWKKXP[b^wsuž…ŠÂ™Þ—¤ó¬ÿª´û¬¶ý®¸ÿ±¹ÿ²ºÿ´»ÿ³ºÿµ¹ÿ¯²ùª­ô££ë™—àŽŒÕ‚€Éxt¾qm·l`¢i]dY“^V‡VQyNKhEDV@@J76;?=>HBBKABN?BYFJmX_}fnt¤}¬§‚®¬}§´w ¾p—Âc…ÃRpÅE^ÔI\×EPÊ9<¾3,»7(¸;%³; ¯<*¯<*°;)³;*·<,»<-À<-Ä<.Ä6*Ë8.Ô<1Û>5á@8á>7à<3á:2Ü73Ù40Ø3/à93èA;ìE?êA<å<5ã<4Û4,Ø4*Û7-Ô2'Ì, Ö6*èH<÷I>ò@6ï4-ð-)÷+*ý+,ý+,ø*,ñ))ì/+è3,â5.Ü4+Ö2(Ô2'Ô2'Ç:&È;'Ê<(Î;)Ñ;*Ò:,Ô8+Ô8,Ñ4+Ø;4Õ:5Õ<7çONîXYÙEEÅ02¾=(¿<(¿<(¿:'Á9)À8*Á7*Á7,Æ>2ÇA6ÏJAØUKÑRIÄH>¿E:ÃH@ÚIDÙHCÝLGäSPåSSâPQâMQåNWòXdöZhý[pþZrýUoûQlýPnÿRpÿFmÿOvÿZ}ÿ[{ÿVqÿSkÿVkÿ[mûYhúYhü`mö`kî\fñenífmÚT[’cY}ND™lfØ’ß¹¶ñÓÑôàßþöôøú÷÷ÿý÷ÿÿöÿýùÿýÿþÿÿýÿÿ÷ûúúòüùôüùôýøôÿùöÿøöùîìñãâçÙÖÝÐÈÜÒÈîäØýöäÿûèÿýçÿÿè÷ýùêðìÝãßIE9HD8FB6D@4B>2@<1?;0>:/:6-95,95,94.:5/<71>93@;5E>6HA7LD7QE5RE4UF3WG7WIC_@EmDJ€OU•]f¦jrÇe˜ÍkœÏl›Ïf‘Í]…ÎTyÌFgË8UÌ0Hß>PäBMÔ:<Æ7/Ã@.ºB*®/Û?0Ü@3Ü@3Ò6*èKBåJEÎ50àFFóZ\áHKØ?BÆ=-Ä;+Ã:*Ã:*Ã:*Ã9,Á9+À8,Â<0Â>2ÈF9ÏOBÎPDÄH<¿C7¾D7ÑF?ÑF?ÕJCÛPKÝROÙMLÚKMÜKPëX`ó[hüaqÿauûWoõOgõMgúPkÿJuÿOyÿSwÿRqÿSmþ[pÿcuÿixÿguüaoôbmìelàglÔjjÉjh¼c_dVeH:_Tª‡Í«©åÇÇïÚÙÿóóùøöøþü÷ÿÿ÷ÿÿûÿÿÿþÿÿüÿÿ÷þûüôúûóûúõþûöÿýùÿûøþôòøíéêßÙÞÔËÝÓÇíæÖÿøåÿþèÿÿæÿÿçõúóêïèáæßLI:KH9JG8HD8FB6D@4B>3A=2=9.<8/;7.;60;60<71>93?:4B?8EA8JD8NE4PE1TE0VG4XH9ZMEVMR[Whkl‹~‚²‰“Ð’Ÿå™§ò§­÷©¯ù«±û­³ý°´þ°´þ°´þ¯³ý«®û¨«ø¥§ô ¢ïšœé“•âŠŒÙ„†Ó…É{u½mk­dd _a”X[†QQsNHbUFY_CRlBLEO˜LV¬U]¼[dÅ]fçJuéNxæPuàLn×FcÒ?YÍ5JÊ+?Ú5EçAMéFKÙ><Í>6ÊH8¿J6°B)·>-¸=-º<-½>/Ã?2ÊB4ÐD7ÕE:ÙE9ÚB7Û>5Û:2Ù6-Ù5,Ú3+Ù2*Ô1*×4-Û60Ý90ß80Þ7/Ý6.Ü5,Ö/&Ù5+Ø6)Ï2#Í1"Ò9)Õ>-Ó<+Ö=-æD7÷KAÿD?û56÷)-÷)-ù.2ø67í55â30Ú1,×/,×/,Ù0-Û/-ã80â:1â:1â<0à<0ß=0Ü?0Ú>1Ñ7+ïWLù`XÓ;6Ó;:èOQÞEHèOTÍ=2Ê:/Æ8,Æ8,Æ:-Å;.Ã;-À:.¾:-¾<.ÁB3ÇH9ÇI:ÂD6¾@2¼>0ÊE<ÊE<ÎI@ÕPI×RMÔNKÓKK×LOçZ`ð^hüfrÿhxü]qóOgóMeùQjÿPzÿQxÿQpûSmø\qûhxûjw÷epüfró_kí_kêkrÝsu¿lh¦f\¡l^ujXVI8kXJ–{t¾ŸœßÁÁïÕØþîïûõõúüûúÿÿùÿÿýþÿÿýÿÿûÿÿ÷ÿýÿ÷ûþõûüöÿþùÿÿúÿþúÿûõÿ÷òñèáäÜÑáÙÌðé×ÿúæÿÿæÿÿãÿÿäöùðíðççêáQK=PJ3Õ;1Ö8/Õ4*Ö3*Ø4+Û4,Ü5-Ú9/Ý<2à=4ß<3Ý90Ü5-Ü5,Ý6-Ò.$Ý;.Ü<.Í1"Å.Í8$Ð=)Ì;&Ë:'Ò9+á:1ó=9ÿ@@ÿ;?ÿ27ô+1ê,.ß+,×+)Ó+(×/.Þ44ä88è:;ó55ò64î73é6/ã7-Ý5*×5(Ñ5&Í5'çPEÿmcÛHAÈ42×CCÓ>BêUYÙB;Ô=6Ì70Æ6-Ç9/Æ<1Ã=1Á=.»9)»<+½@.¿B0¿B0¾?.¼=,»<+ÃC8ÄD9ÈH=ÏPGÒSLÐOIÐOJÔOPç_cîaiûitÿm|ÿdu÷UjõRgýWoÿSxÿUtûWpð_pñoyôy~êmsÞXaïamò`mïaoðs{숊ɂ|¥wjšyhhpYMO:^WGƒqg±•’Ý¿¿ñÔØýéëþôõýûþûÿÿúþÿýþÿÿýÿÿûÿÿöÿüÿøùÿõúýôÿÿúÿÿúÿÿúÿý÷ÿþöùðçíåÚéâÒôïÜÿûåÿþåÿÿãÿÿâøúíòôçîðãSM=RL4D=5B;3A:4@93A:4A96B:7@A;CC;IE:NG7QF2RF.UF/WH5XJ=RHFXR\jh€}§‹’Æ’žÚ–¤å¥¦ù¦§ú©ªý«¬þ¬­ÿ­®þ¬­ý«®û¨¬ö¦ªó¤¨ñ£§î¡¨î §ë¤è›¢æ™žâ’šÛŠ”Ò…Ê‚ŽÂ‚‰·‚©‡yšŽmˆšczªWi¾P]ÓKWäGPí?Hñ9Aî;6é<5âB6ÙH7ÎJ5ÅG1ÂD.Å@/ãUGàG?Ú;7Ø64Ø88Ö:;Ï98Ê66¼=.¾<.¿;.À;,Â8+Ä6*Æ3)È1&Í5*Ð3*Ñ3(Õ2)×3*Ù5,Ý6.Þ7/Ü>3Ý<2Ü;1Û8/Û7.Ú6,Ø4*×3)Õ3&Ó3%Ñ4%Ï6&Ò=)Ñ>*Ê9$À2Æ;(È5%Ó3'ç60ü;<ÿ=@ÿ7=ù27ê-1à..×--Õ0.Ü44ã9:é;=ë;>ý.4ú/3ö01î1/æ1*Þ2(Õ1%Ï3$È2#Ð>/új_ãTLÈ95Ð@@Ë:=ãRUçJEÝB=Ò93Ê5.Æ8.Å;0Â<0¿=-¹<*¼?-½@.¼?-º;(º;(½<)¾=*º>2º>2ÀD8ÈLBÌPFÊNFÌMGÐNLçbcêbføhqÿo{ÿhxøYm÷Ujþ[pÿXsü\tìbqãktç€í‰‡ãyyØ_dñhrÿl|öcsíkwø‘•é¤ŸÀ–Š¥‹z\pWFRRLÿ4:èB*âD)ÙH)ÎN+ÃO(¹L%¶H%»D&ÛWBÚF8Ú;5æ>>íBHé>Fß5>×08ÈF8ÇE7ÈD7ÉA3Ç=0Æ8,Æ3)Ç0%Ê0&Î1(Ó2(Ö3*Ù5,Ù5,Û4,Û4,áC8Û=2Ø7-Ø7-Ü:/Ý9/Ù5+Õ1'Ù7*Ð0"Ì0!Ð9&Ì9%Æ5 Ç9#ÑE.Á:&É:)Õ7+â3.í//÷05þ5;ÿ;BÿIMúGJîDDæ@@ä>>ã9:ã28á.4þ'/û(/ø*.ó-.ë0+ã2*Û5)Ô7(Æ0!¾/óeYê]TÌA<ÓEDÊ;=ÝNRïPMäFCÕ:6Ê5/Æ8.Ä:/À,¼A/½B0º=)·8%º9&¾;)Á>,²8+²8+¸>1ÁG<ÅK@ÄIAÆICÊJGå`aæ^bñdlÿlxÿix÷ZköTiýZoú^tòcuãgqØqrÝ…é”ꋇåruùq{ÿxˆõ`sßXgóŠ‘ý¶´Ö«¢¬•…TnSAS;PTCkaWž†‚Ý¿ÁõÖÛøßåÿóùÿûÿÿþÿüýÿýüÿÿüÿÿúÿÿôÿùÿø÷ÿôöüòüÿøýþøüüôÿýöÿÿöÿþôûõç÷ñáüúåÿþåþýáýþßÿÿãÿÿñýþîüýíXO@XO@WN?VM>TKñ8>æ=@ÙD@ÑHBå;Dà;BÞCGÉ99ÌB@ËD@½/-ÞHIëHKîAGï;Dì8Aé:?â<>Ú<;Ô<9ÏA=É>9ÊC=ÑLCËK@¼>2³7+¹;-¹9,¾8-Å7-Ê3,Ï0,Ô/-Ý11á34çA1à9)Ü1 á1"é8(ê;*ã6%×2Ñ2Ì4Ê5Ç4 É3"Ì3%Ñ3(Ô3)Í.(Ï2+Î6+Ì8*Ë8(Í7&Ð7%Ø6'ß3'é2,ð31ò01ð+2í*2í+4ï-6ú+1÷*/ñ+,î.-ë4.ä8,Ú7(Ð5#Ã.Ä3 çXHèZLÊ<2ÞOGÄ5/ÚIFÝQRÚLKÒDBË<8È80Ç7,È9+Ê;+È;)Å:'À9%½:&»<)º=+¸=+¶=,³9.µ;.¹=1½?1½?1¿@1Â@2ÅA4ïk_õqeêd[ômiùroécbðjiútuÿk|ûivñdmï_hòaføgjõnkîqk÷|wÿ}ƒþYjÿ[wîZpû¬±«°œaŸz]sMIZ6LR6snX£–†Ë·®íÕÓÿîðÿõ÷ÿ÷ûþøüüüþþÿÿþÿÿþÿÿýþÿæÿòàÿëâýêìÿð÷ÿôûÿôþÿóÿþñÿýïÿûîÿùèÿùæÿøãÿùãÿùáþúáýÿþþÿÿþÿÿYPAXO@XO@VM>UL=TKDë:Bè7?ä7;Ü89Õ:8Ð;7ÓF?Ç<5Å<4ÌG>ÌLAÁC7¶;,·9+¹7*½7+Å7-Ë4-Ñ2.Ø3/á53æ66á?0ß<-Þ6)à4&á6%á6%Û4"Ó4Ð:"Ê:"Æ:#Æ;&É<*Í;,Ì8,Ì5*Ö3.Ö5-Ñ7-Î8*É6&Ç4"Ë4!Ð3"Ø2$ß1(å/+ç.,è,-æ,1æ-3ç.4î*,î,-í0.é2.á3*Û5'×7'Ò9'Ó@,»*ÔE5Î?1ÙF>êWPØC?ØBAåWVâRRÛKJÔC>Í=5É9.È9+Ç8(È;)Ä;(Á:'¾;'½>+º?-¹@/¶>-²9.µ;0·=0¹=1º?0½?1ÁB3ÅC6ëi\òmdçb[ðkfõolèbañklûuvÿp€ÿo|öirë^fêY^òadøqnù|vöyuÿx~ùRdÿUríXnö¥«¥¨“X”n[tLN_;QZ;us\ª×úøàÜÿôóÿúûÿúûÿûüüüþúþÿûÿÿúþÿûüþçÿñáÿêáýçéÿìóÿòøÿóýÿòÿÿóÿýïÿýíÿúëÿöåûóàúòÝûõßý÷ßúúøüüúÿÿýZQBYPAYPAWN?VM>UL=TKCæCß>Câ;CØ7=Õ?AÏA@ÉD?Â=8Ã96ëWWàBCæ=Bé:Aæ7<Þ58Ö66Ñ96Ì;6ÕHAÅ:3¾5+ÅA5ËK>ÆH:»=/¶8)¹7)¿7+Æ8,Î7.Õ60Þ63æ87ë;;Ó5)Ö6*Ú6*Ü6*Ý5(Ý7)Ú:*Ö?,Ã5¼5¸6 ¸7"»9)¼8+¼4(º0&é=;å>8Þ=5Ô*ÓB/Â1 æTEÐ<0ÚA;ÞC?èJIòTSèVVçSSãOMÝIEÖC;Ï<2Ê8+Å6&Ä7&À7%¼7$»:'¹<*·>-µ=,²=,°:.±;/²<.µ=/·=.º?0ÀB4ÃE7Ü\Oêg]äaYñlgöpoçabìfgòkoäP`ï^kôhqòemñ`eödgûqqúzwövsÿnuõJ]ÿMjïUmñœ¡ŸžŠPˆcVoEOd=Va?ww]¯¤’âÐÄÿíæÿ÷óÿûøÿýûÿþüûÿüûÿýûÿýùÿû÷ýùãÿëÜþãÚøÞàúáèûåïüèöýëýþîýúëÿúêÿ÷èúñàòê×ðèÕôìÙùñÜýùöÿûøÿþû\PB\PB[OAZN@YM?YM?XL>XL>UI;TH:SG9RF8RF8RF8RF8RF8JF=KGÓ>@ÐFCÅA<¸71Å>:ê[WÝABä?Cç=@ã:=Û89Ó97Î=8ÌA:ÏE;Ã9/»2(À/¸9(¼8)Â8+É:,Ò:/Ù80á83è;7ì=:Ô3+Ö3,Ù5,Ý4-Þ6-Þ7.Ú:.Ô>/Æ9(Á<)½>-¹>.»=/½=2Á>6Ã>7ó?>î?<æ?7Ù=1Í:*Æ9%Æ;$È<%Ï<(Ï8'Ï2#Ñ1%Ó2(Õ4,Ñ2,Ï0*Ñ3*Ó5*Ñ7+Ï7)Ê7'É8%Ê<(Ì>*Ê<(Î=,ô^PàF<Ò3/Ò.-è?BþUXÿvuÿroÿjgö^YçPIÕA7Ç5(½.Ä8'À9&»8&¹:)¶=,µ=-±>,°<-­<.­<.®=/°<-±;-¶>0¼B3ÁE9ÉMAß`Wâa[ôpløtrå`aä]aå^dÙFVçYeógpôgo÷dlýjpÿstúxvõssûenóCXÿEbðRkë’˜œ—ƒN‚\Ql?Ri?ZhDy|_°ª”èÛËÿôêÿùðÿúóÿýöýÿùûÿúùÿúöÿøòüóîøïÔüÚÎóÒÊëÌÏìÎ×îÒàïØéòÝóöãöõãûõåüõãõìÛíáÑéÝÍíáÑóç×úõïü÷ñþùó\PB\PB[OA[OAZN@YM?YM?YM?WK=VJcî7Uí8IçAEßFAØIAØIAÞFCæAGð;Jõ8JãDI×>AÐ@?ÏJE¾?8²3,ÇD<âTPÜDCáACä>@â>?Ü>=Ô@<ÏE;ÌH<Ç=2Á7,½5'½9*¿=-¿=-»<+½<)À;*Ç;,Î<-Õ;/Û8/à70ç83ë95ã:7â64â22å31æ42ä50Û2+Ò1)É2'Ç9-Ä<0¿90¼5/¿52È<;ÒDCó57î66å61Ø5,Ë5&Ã6"Á9#Ã;#É>'Ê9&Ë5$Í5'Ñ9,Ó;0Ò:/Ï8-Í?1É;-Ä8'Ã7&Ã:'Å<)Å='Æ;&Í>-Í:*Ø>2ãB:Ö.+æ::á14å26Ò73Ö;7ÞC>åJEêQIêSHèTHäUGË?0Æ>.¾<,º<-¶>.³@.°?/®?.«=0«=.¬<.¬<.­<,±=.·A3¼D6ÆLAÞbZâc]ðnlôrrå`cå`eæ`gúixûozõltí`hñ^fÿkqÿw{ÿ{|öpqø^hö@Wý>]óOh懠•ƒX†aXuE\vIgwP‚ˆfµ±–éáÌÿùéÿüíÿýñþÿóûÿôøÿöôÿóíûìäòãÝëÜÁëŻ㾺޺¿Þ¼ÆáÀÍâÃØæÌãëÓìîÙôñÞøñßóêÛìàÒèÚÍìÜÏñáÔòçáòçáóèâ[OA[OA[OAZN@ZN@YM?YM?YM?XL>XL>WK=VJPI?QI>SK>UL;XM9YM7YM7XM;WK=ULGYSWc_nmkƒtt–|~§ƒ†³†‰²‡Š·ŠŒ¿‹ÈŽÏŽŽÔÕÓ”Ó‹Ê‚‰¿{‚¶u|²ov­gp«ck©€n~ey­ZvÏMoê?cú2Vÿ0Lû6Gð@CâGBÙLB×MCÝIGèCJõÍID¸<4¯5*ÉI@ÕLF×CAÜ>=Ý:;Û;;Ù?=ÔE=ÌH<ÇI;Á7*Á7*À8(¾9(¼9'º9&½:(À;(Ä;)Ê=,Ò<-×;.Ü8.á6.ä6/è5.ê24è.1ê+0ð/2ö37÷69î45æ21Ø/,×31Ô63Ï42Î/3Ð/5Û5?ä=Gõ,2ñ.2è2/Ü3,Ñ5(É8'Æ;&Æ>(Ä9$Æ8$Ë8&Ò:,Ø?1ÛA5ÚB5ÙA6ÎI8ÇB1¿<*½:&Á<)Ã?*Å<)Ä9&Ì;*Î6)Î0'çB<Ý1/ñ>Aå.2à'-Ò3-Ó4.Ö71Ö92Ò8.Í5*Æ2&À1#ÎE5ÆA2¼=.µ:+±9)®:+ª:,ª:,ª/«=.«<+¬=,°?/µA4ÉSGàg^ßd_èkiînoæchðjqõoxüp}ýt~õmwîcj÷dlÿqzÿw|ûsuökpöXfûAYÿ:[õKfâ}…©˜†l”ojŠXo‰ZxŠ`—r¶·˜âÜÂúôÞüúåÿÿïûÿïõÿïîÿëçúäÜïÙÐãÍÉÛÅ«Ù«¨Ó¦¨Ñ¥¯Ô©¶Ô®¼Ö±ÇÚºÒßÁàæÌêéÔòíÚòéÚïáÖìÛÑëØÑíÚÓèÛÒæÙÐåØÏZN>ZN>ZN>ZN>YM=YM=YM=YM=XL@çE@ÝJBÚKCÞHGéBLó8ÏE;ÆF9¿E6Á8(Ã:*Â:*¿:'½8%½:&¿:'Á:&Ä9&Ë:)Ò;*Ù9+Ý7+á5+ä3+ç4-í)-ò)/ù,3ÿ.4ÿ07ÿ18ÿ28ý58ú7;õ8<ò9?ò9Aô9D÷6Gû6Hü5Jø)1õ,2î02ã4/Ø7-Ï9*Í<+Ì=,È7&Ï9*Ø2á?4â>4â?6â?6ÑN<ÍH7ÇB1Â=,¿:'Á:'Å9(È9)Ç3%Ó9/á@8ëD>Þ0/á-.ì38í38×4-×6.Ù80Ø:1Õ;1Ó;0Î:.Ê:/ÖL?ÌF:¿?2´9*¯7)«7*©8*¨8*ª<-¬>/­?0­=/«<+«<+­<,¯>0ÀKAÚc[Ýc^èkiðosëhnõrzüvïer÷oyør{öjsÿlvÿvÿu}öioõfl÷RbÿA[ÿ6YôFaÝt{²›‰€¤~z›f{—f€–h‘u­±ŽÌË­áàÄéëÓî÷ÜåóÙÙíÑÎçÉÅÞÀ¼Õ·´Ë®®Å¨•Ã’”‘˜Ä“¡È™§Ë¬Ë¡µÎ§ÁÒ®ÎÙ»ÙÝÄåãÎìåÕïáÖëÚÒçÒÍäÏÊÞÐÇÚÌÃÕǾ[N>ZM=ZM=ZM=ZM=ZM=YLXL>YNø<=íA=äE?àGBãDHèAKï=Mô:OÒBAÑGDÅA<ÂH=¯;.°5É83È.,Ç)&É.*Í:3ÌC9ÂD6¸@0Ã:(Ã<)Ã<)Á:'À;(Á=(Â;'Ã8%Ä6"Ê7%Ô8)Ù7*Ý5(á3(å3)è3*û03ÿ58ÿ7<ÿ38ÿ,2ÿ&-ÿ'-ÿ)1ÿ,3ù'0ô%/ú'6ÿ+=ÿ(Aÿ:ú2ö".ô&0î+1æ0/Ú1,Ò4+Ï5)Ð6*Ô6+Ü90æ>5ì>7ë:4é61è50é61ØL?×K<ÒF7Ê>/Ä6(Â3%È6)Í9-Í5*Ô6-æC<à74à21Ò ì89ê35Ó2(Ô3)Ò4)Ñ5)Ï5+Ì5*È5+Å7+ãYNØRFÊH;¾@4¶=ê@AéBIêCMëANê>NÌA<Å@9¾?6µ?3®=/±=0¿E8ÒMDÇ61Ô;6Ï1.Í2.ÖC<Ç?3´6'·?.½6#Á:'Ã<)Â;'À9%Á:&Ã:'Ç:&Ë:'Ð9(Ô7(Ö3$Ú."à/%ì7.ô=5ø72ù30ú.-û)(ý%&ÿ#%ÿ"'ÿ"'ÿ$*ù )ú!,ÿ%7ÿ'<ÿ;ÿ4ÿ3ý)7ð".ç"+ä*-Ý--Ó+(Ò-)Ü41â62é54ï64ó55ó12ñ-.ï+,í++Õ<4Ò91Ñ:1ëTK»"Ä+#ßF>È.&Ì/(Þ<7èE@â:7Ø/,Û.*ã41é:7Ý?3×;.Ï5)Ë3&Ì5*Î:.Ë;0Æ8.ìbWàZOÈD8¹6,º:/·9-¯3)²6,¯1%°2&®2&®4'¯7'²:,²<.³=/°:.ºC;Ö\Wìppñsvøv~ûyƒõq|ÿ{„ûx€øu}üs{ÿr~ÿq}ÿlxûisøbmôI\ÿ=\ÿ8[ñ:VÖek²–‡¦}~¡i|šd}•c‡—j”ŸuŸ¥ ¨ƒœ¨„’£Š£|€Ÿvx›qw›o|r t„£w¯uƒ³y‰¹½„“¾†—¾‡œ¾‹¢½§¼“¯½š¾Â§Ï̹ßÓÇãÒËÜÇÄÖ¾¾Ê»´Á²«¹ª£ZM1ÐB6Ü?6è?8ôA=ö=;ø:<÷:@ô7½=4¶<1°õ6;ú3:û06ú-2û.3ý14þ36×4/Ü:5Ù72æDAæDAÎ/+Ñ2.Á"Ö41á?<èE@à=8Ø3-Ù2,Ý60à91Ò<-Ï9*É5'È4&Ê8+Ë;0Ê<2Æ9/ícYáXNÉ@8¼3+À:1Á;2½7.À:1Á4+¾4*½4*»5*¸6(´6(²7(°6)´;0»B9ÓYTèllïqtöw~þ|†øv€ÿ|„ûyøv~þuÿsÿo}ÿiwùeqùanöI]ÿ<\ÿ9\ô=YÕdh«y€œsu˜`t’\w]cŠ•k—p‹•p…”mp†_lˆ_fŠ\g^j_q•ey›i}l€­r„²tŠ¸z»}½‘½‚–½„›»‰›µ†¡³­¶—¾½¨ÏÆ·ØÇ¿ÖÁ¾ÒººÅ·¶º¬«²¤£\L<\L<\L<\L<\L<\L<\L<\L/ÇE5ÐG7ÚC8ä?9ó=<ú9>ü9Aú:Eò>GæAH×@EÏ@B¿<4¸90±8-«:*¨9(«:*»?3ÏF<ÙD>Ø96Ú65Ü:7ÜC=ÝOEÍI<²4%À9&Á:'Ã<)Æ=+Ç>,È=*É:)Ì9)Ï8'Ï2#Ó/#ß4*î=3ô?6ñ91í2+Ú7&Ý6&à3#å/"é-"î+%ñ,&ò+(ó++ð(+ò'-ú(5þ%8ÿ5þ2ÿ3ð(5ô.;ô4?ò8Cï;Dðå+6ñ1<ô/9ù-8ù+5ù,3ø-1ö.1ö01Ù1.ä<9Û64à;9ÿljæBAÒ.-Ð.,Û97á?<àA=Û<6Õ7.Ô6+Ô6+Ó5*Å8&Ã6%Ã6%Ä8)Ç;.Æ<1Æ<2Å;1ëaWáTMÉ<3¿0(Ë;3Ï?6Î;3Ñ>6Ú=8×<7Ô=4Ï<2É;/Â:.»7*¶6)·;/»@8ÏTMãgeíorøz~ÿˆý{…ý{ƒùzúx€ÿwÿsÿl}ÿftøbnø]kõG^ÿ:Zÿ9\÷AZÐ_c›gkŠ^e†Oh…Ol„Rt…X{ˆ\}ˆ^x„\q‚X`yO_P`†UeYm•`uœg{ j€£m­p…±tˆ¶v‹¹y‹¹yŒºz‘º~”º‘±•¬€›©†©­’ºµ¢Ç¹°Ë¸²Ì´²¶­®ª¡¢ —˜[K;[K;[K;[K;[K;[K;[K;[K;ZJ:ZJ:ZJ:[K;[K;\L<\L<\L<]K=]K=]L<^M=^M;^O<^O<^O<`P@^Q@]P@\NC\NE[NF\OI]PJ`NdcSmfX{g^‰ohœzu¯„|¸†{µ™…º¥…´¯€ªºy¡ÈxŸÓušÍc‹¾OyêAFà@@ÕA=ÌF;ÈJ;ÉJ;ÐF9ÜB:î@?ø;Aþ:Dü7õ>8ð50è-&×:)Ú8)Ý5(à2'æ/'é.'é,(é,*ç+*å(,è)1ï+7õ';ö";ú=ÿ"A÷8Gä(6ç/;ÿP\ÿ`lÿP\ò^N>^N?^N?_OB`PC`OEbM\cPdcUodZle‘vr¤~w«‚v¦“~©¬†«Â‰©ÐžÛw“âk‡ÝXuÓFfÿ=MüDPðJNÞJHÌG>ÇG<ÍG<ÙD>èBBó>Cù>Gø@HðCIÞDDÍB=À?9½A5µ=/®:+ª;*©:)­9*º<.Ì?6áFBä<;ïABíAAÞ:8ãJBæXLÔL>È@0À8(»3#Á8(È<-É:*Ë7)Ð8+Î0%×3)à8/é;4ï:3î50ë0+è+'Û4,ß4-ä2.ë31ð43õ45ö58õ6;é/4ç.6ê0=î1Cò.Fõ*Gý,Lÿ1TðPî3Dî2Aî3>ê5<æ89Ü73Ð3*Ç/$Ì2*È-(Ñ61óXT÷\ZóXVÜ@AâHHÜB@Õ<7Î70Í6-Ï8-Í9+Ê7'Æ3!³:%²9$´;(¸=-¹;-¶6)»8.Ä>5ÛNGÙEAÎ50Ð1-á>9è?:ã81ä71ð/0ï11ì42é73â92Ø:/Ð9.È:.¾6*º7-ÈIBÜ_Yënlû}€ÿ…‰ýƒõv}õx~ùzÿx‚ÿsÿj{ÿdtö_nðUeôF]ÿ6Vÿ7ZúF_ÀTRvaBJoRÿ-Hÿ:QþCTéDKÒ@AËA>ÎDAÖEBãEFêAFï@EïBFçDEÚEAÉC:¿?4º@3±;-©8(¨9(©:)®9(º:-Ë;3èIEë??î;>æ68Û2/ÞA:îZPõg[ÙQCÉA3¾4'À6)Ç9+Ê8+Í6+Ò8,Ñ0&Ü5-æ;4ë:4ê40è/,ê-+í-,ó4;õ3;ø3<þ2=ÿ1>þ0=ý0?ù0@ô1Añ2Dò5Kó5Oó0Põ-Qþ1Xÿ:dá7B÷O\ÿanÿ`nþXfùQbòEXé8Jó@Sê:GÝ2;Ò/2È3-Á9-º=+µ>(Æ9/¿2(ÙJBúkcÝLGáPMÍ<9Ï;9àLJÔ@<Ê7/Ê7-Î(«;%­=)²?-±9)®4'º:1ÊC=ÕHAØC?Ô72×2.ç;7ì:6è2.ë2-÷)+÷+,ô.-ð3/é61â:1Ú<1Ò>2Â6)º4)ÅB:×XRçjhú|}ÿ†‰þ€„õv}öyú{‚ÿx„ÿqÿh{ýbtõ^oîSe÷I`ÿ9Xÿ9[ûI_ºQNmZ:Em8ZvCa|InSv†Y|‡]Šbg‚—lœl{ m|¤o}¨p~ªo‚ªnƒ©l…©lˆ«qˆ®qˆ°r†³r„³oƒµn„¸p‡¹t‹µv‰¬tŒ¦wš¨„°´™ÈïØ̾àÏŽÃÓ«±Á›¡±ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8[L9[L9\M:\M:\M:`J<`J<^K<_L=^M;_N<_N<^O<^O<_P;_P;aPHÿ$Hÿ0Qÿ;UñÇA6¾>1·?1¯9+¨7'¨:)¬=*²=,À>1Ñ>7ß=:ç79æ/3ã/0á32Û94åNEülaïj[ÙQCÆÍD>Á61É;7ãUQÕF@É91È8-É:,È9(È:&É;%ªB)¦<&¦<&¬=*©8(¬3(¼=4ÒMFÕGCÝEBÛ96Ü30é73í41ì/+ó2-ÿ)/ÿ*/ý--ö0/ï4/è7/ß;1Ø>2É:,¼4(À;2ÏNHßb^÷yzÿˆŠÿ„†ùzú}ƒü}„ÿx„ÿn~ÿdwù^pò[léN`öHaÿ8Wÿ7YøH]²JGcS1Al6ZtDf~NuˆZŽc…f‡’jˆ—n‰žs‡¤t‚§t§r}¨p}©n©mƒ©l…©k†§n‡ªp†¬o…¯o°l³k‚¶n…·p‡´s‡­rŒ¨wœ¬…²¹šÈƱ×οÞÐÅ·¿Ò¤¬¿’š­ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8[L9[L9\M:\M:\M:`J<`J<^K<_L=^M=_N<_N<^O<`Q>aR=bQ=bQ=bR;bP:aO9`N8jNMgNRbQ[cWkjfuv’}}™y‘’{¯ŒËƒ‡ã{|ùqsÿgjÿTXÿAGÿ#Mÿ.Tÿ7Wù9Pé>NàEM×EHÑ?B×BDÚACÜ@AÛA?ØC?ÏB9Å?4¿=0·?1¯9+©8(«=,°A.·B1ÇC7×D=Ú64å57ã,0ç02è88Ó0+Ï5-éUKÿznæ^RÎD7É=0Ê<0É6,Í6+Ö90Ú70ß82ä71ç40é1/í10ò53ø87ÿ=ÿ>ÿ>ÿ>ÿ=ÿ=ÿ<ü=ò:ï@ð$Ið&Nï$Qó%Uÿ0eÿ=sÿgrþalôXeîR_ïQ`îM]â?RÖ1Bß:JÑ4?¿-0±-(¦5'ž>&–C%E"¯7&²9(ÒWHº<0ÁA8º7/º3/ÍC@ãXSÕHAÈ91Ä6*Å6&Ä5$Ä6"Ç9#¦B*¢<%£:%§<*¦7&©3'½A7ØSLØIEáGEÞ:8ß2.ê41î1-ï.)ù4.ÿ'-ÿ',ÿ)+ö*)í-(ä1*Ü5,Õ9-Ð>1½3(¼7.ÉHBÙ\Xôwuÿ‰‰ÿ‡‰ý~…ý€†þ†ÿx„ÿl|ý`sõZlïXiãHZóE^û4Sÿ3RóCX«E@\L*?j4Uo?d|LwŠ\†“h‹–l˜pŽtŽ£xŽ«{†«x©t|¨mz¦i}¥g¥h‚¦h…¤k…¦m„ªm‚¬l®j}±i€´lƒ·oˆ·sˆ°tŽ¬xœ®„²¹šÄ«ÐǶÖÈ»²½Óž©¿‹–¬]K7]K7]K7]K7]K7]K7]K7]K7^L8^L8^L8^L8^L8^L8^L8^L8\J>]K?]M@\L=ZM=ZO=\Q?^SA_T@_R?^Q@aQAcRBdQCdNAcM@pKEjKIfOUgZknl„v|ž}†¯ƒŠ´Š…®Ÿ‰­¸Š¦Ìƒ”Þ{~îumøl]ûfRðN[æDQä>LéANïCQí>Ké:Gê4Á;/¼8+ :$¬C0¬=,®6(Â?5ÑD=Ð;5Ó61Û83Ü71Ý6-Ý7)Ü9(Ý='Ù;"Õ7à74õPLõXOÛD9Ç8(Ì?.ÒC3Ñ;-Ò4+ðGDâ.1ï4;ö4?ï+9ÿ@Qí(9þ&+ÿ*-ÿ*-÷"û#$ÿ()þ((òð"ú+1ì )î&1ò.<ç$5ÿYnë+@ÿ`jÿ^iÿYcûT[öPTìHIÛ@;Ê:1ÅA2½F2®D.Ÿ;$”5–7#˜;)œ=+§81«83ÁEC¿;9¾23Æ45È44×CAÜKFÚKEÑD;È:0Ä4+È4*Ì3+Ì2*·?1³9,®.#­'¶,"Æ7/ÓC:ÚG=äPFßE;Ù80Ü1*ç/-ô01ý/3ÿ.4ò14ó12ô01ó/0ó0.î1+é4+à8-Ö=/¾2#¾?0·>3Õ`Wçtqÿù…†ôŠŒþ…Œÿwˆÿe}ÿ[wÿXuÿSoûJgûDcö7Y÷9]ç>[Ú]k„C=PI/F`;Xw^N?^N?[N>ZO=\Q?^SA_TB]QA]P@_OB`NBbPFcOFcOFkLGjMOgS\h_rnoŽw~ª~ˆ»…ŠÁ›–Ì¢Œ»«£»wŽÕx‚í|x÷uhöjYüZgóN\ìFRòHUöJVõERï?Jë;Eä9Aà:>Ú::Õ=:Î?7Ç>4À+ª?-¨9(²:,ÁA6Å<4Ç7/Õ<7Ó40×4-Ø4*Ø4(Ú7&Û:&Û;%Ù;"Þ52æA;ëMDàI>Ð>/Ç8(Ê8)Ó;.Ý<2öJFæ/1ò5<ø6Aò.<ÿ?Pì'8ö$'÷%(û),ý+,ü*+ù'(ø((ø*,ð$'í%(ê%,þ:DÚ'ð4CüATÞ#6ÿluÿblþZcüW]õOSæBCÙ;8Ñ>6¾8,¾E4¹H6¨?,–1)Ž()ž-'°:6ÑTRÎHGÃ54Æ45Ò<=ëWUØGBÖGAÏB9Ç9/Ä4+Ê6,Ð7/Ò5.Â?5À:1À5.Â3+É4.Ð83Ø?9ÞE=ãJBÞA8Ù6/Ü1*æ0-ó11ü03ÿ.3ò14ó12ô01õ/0ó0.î1+é4+à8-×>0¿3$¼=.¶=2Ó^Uévsÿù…†õ‡Šþ‚Šÿu…ÿe|ÿ[vÿWtÿQoþIhúAaö8Zö=_æF`ÅQ\{?7NH.Ga>Yx=e‡Ks•Yx›awbz¢f|¥i}¦j|¥i|¥i|¤h{£e{¡d}¡c}¡c¡d{¤l}¦n}©l}ªi}ªe}­c¯c‚±cƒ±f‡²k‡¯pˆ«u‹«|¬„©‰‹¤†z…‡doqR]_]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8^K<_N>aP@`P@]P?[O?[O?[RC[QE[QE\OF\OG_PKcQOfTRhTUiTQiVXi]kmi„sv¡zƒ¼ŠÍ‰Ö—‘ÙŸ‹Êª‚¶º}ŸÒ‘烅ð~tïveÿ`k÷S\íGQðFQöHR÷EQô@Kî=Gå6=à7:Ù99Ô<7Í@7ÅA4½?0¸=-©@-¨=+ª;*¸B4ÅI?À;2»0)Ì92Í6/Ò5.Õ7,Ù7*Ù7(Ú7$Ü:%Þ<'ß3/Û4.âA9éOCÜH:Ç6%Æ3#Ù@2á>5õHDé13ó4;ú6@ø4@ÿES÷3Añ),í"&î#&û03÷--ï''í%%÷12ì(*ø7:è+1â)1ë3?ÿR^ï=KÿYiúafñV\îOTðMRêEIÞ:;Õ74Ô?9À6,¿?2»C5²>1ª8-¥3)Ÿ,%œ' ˜% §0*ÆFCÂ::¼,,È44×ABô^]Ò>:ÒC;ÐA9Ë=3Ì9/Ô=4Ú@8Ý@9ÙA>×=;Ü>=ãA?ã?>à;9ã?=ëIDàA;Û=4Ø5,Û2+å2-ð31÷12ú/2ó04ô02ö01õ/0õ/.ð0+é4+à8-Ø?1À4%¸9*´;0Ð[Rízwÿ’’û‡ˆøƒ‹ü~‰ÿr‚ÿcyÿZtÿTqÿMmÿFgü=_ø:^ôBbåQg§?Fn<1OK2KcA[z?h‡Lr“Zu˜^tš_wŸc{£gz£gy¢fy¢fy¡cx byŸb{Ÿa| b}Ÿby¢j{¤j{§h{¨e{©azª^|­^®`…³hŠµnŠ²s‰¬t†¦w‚žvy“pn‡gVb`COM4@>^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^L6`N:aP<`Q>]P?ZN>YPAXPEXOH[RM_UTcWYeX_iYcl\fm]hlbclemolrtšx¶~†Ï„ŒßŠŽç‹‡ÞŠÙ¬‰É³­½y’Í{ßyê†vÿnrÿbgùU\öLUöFPöBMó>Gð;Dæ5;á7:Û97Ò=7ËA6ÄB4»B1·?.©;,­=/¯>0»G:ËRGÇH?¹6.º1)È91Í81Ó;0Ú<0Û;-Ù6%Ü6&à9'á40Û2-à=4ëOCãK=Ñ;,Ð8*àB6Þ7.ð>:é/0ò16÷4<ü8BÿNZÿKWý>Cò38â$&í/1ê,,ð22ç+*é0.ò::Ñæ37Ü-2ç9BïENÿYcôLYÔ?AÚADßCFá>CÞ9=Ü89Ø88Ó:5É83Â91½:2ÀA:ÍNHÖVSÐNNÆAB¯82µ:5ÏKGØNLãQRïYZêRQñYXÉ51Î>6ÑC9Ð@7Ó?5ÚA9àC<àA;íCñ:?é58í=?øLJà93Ú70Ø4+Ü3,ã5.ì30ò21ô01ô04ô02ö01ö.0õ/.ñ0+ê3+à8-Ù@2Â6'µ6'²9.ÉWMî}yÿ“’û‰‰þ€‹ý{‡üoücwÿXqÿNmÿFhÿ?cþ8\ù=`íIdÙYhˆ25d<0SQ8TgG`}Ej‰Ps’Yt•\u˜^wby¡ey¢fw dv awŸavž`xŸ`zž`{Ÿa| by¢hz£g|¦fz§bz¨_z¨]|«]~­_†²eŠµmŒ³rŠ­s†¦u€œstŽii_RaZDSL8G@^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;_K2_M5aO9_P;\O>ZN@XPEXQKYQO^X\g`hnfsshysg{sg}tfnnzor…rw•v|¬y‚Ã~†×ƒŠåˆ‹ì’뛌ߞƒÆžt¢¡kƒ®mq¾vjÈ{iþllÿklÿfiÿ]`üQWöEMð;Bí5=è59ã68Ý98Õ>7ÎA7ÅC5¼C0¶A-¬8+´@3¯;.°;1ÇRHÓ]SÈNCº;2¾90Á7,Ì9/Ö>1Ý=1Ú6*Ü4'á7(á2-ã60ä=5åE9âF9ÜC3ÝA2á?2Û0&ì62ì0/ð-1ò-4ú7?ÿOYÿZdÿ[_ÿOSá.1ã03ß--÷EEè66Ü,,Û-.ë>@Û25Ù37ÿchÞ=CÊ*2Ê-4¾()Ô;=àAEÚ7:Ù37á8;Ü89Î..Ì43Í<9ÓHEÝSSì`c÷hnõdkî[e¿B<ÆE@å^[÷igÿopÿjjåKK×=;É4.Ñ>7ÕE<ÖC;Ó?5Ö<4Ø93Ø7/ö0=ò,9ó+6õ-8ò*5î+3õ8<þJKà3/Û4.Ø4+Ü4+â5.ê40ï4/ð3/ö/4ö/2÷/1ø-0ö..ñ0+ê3+â7-Û?2Å9*²3$±8-ÃNEî}yÿ’‘üŠŠÿ}‹ÿw…ùl|öatùUmÿHgÿ>bÿ8_þ4\õ@aâMcÂWap/+\A0XX>]lMbIl‰St’\u–_v™_xžcy¡ex buŸ`uŸ`u_vž_wž_zž`{Ÿa| by£d{¥f|¦dz¨`y§^y¨Z{ªZ}¬\€¬_…¯g‡®m‡ªp…¥sƒ t{•nrŠffvi[k^RbU_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<`L1aM2`N6^O:[N>YOE[RMZTT_ZahbprmzuŒ{t“yr“zp“yo”ov’pyšt}¨w€·zƒÈ~…Õƒ‰á‹‹å”ã—ŠÒ™„¼¡ƒ§ª„“«~yŸl[ŽX>ÈH?ÕPIäVRìVUòRRôJMî=Cè38ì7<ç9;à;9Ø=8ÑA8ÈC4¿B0¹@-³9.ºA6«5+£.$¼J?Øh\×eZÊVI·=2¸6)¾4)Î:0Ù;0Ü5,ß3)ä6+á/+å61ã;2Ü:/Ü?0ãF7ãC3ß9+ß1&ê3-ð31ï-.î*.ô17ÿEJÿS[ÿ_dÿ\aâ9<â9<Õ+.ôJKâ89×//Û55Ì()Ë(+÷YZÛ?BÔ9=Ð7:· %Ã))Û=>åBEÝ49Ù,2Þ17Ú/5Í(,Ò37äKNöaeûhnùcl÷_kû_mý_nÒNIÔOJè]ZêVTçMMãGHÑ32Î31ÙA<àKDãPHßKAØA8×:3×50Õ2+ÿ,;þ+:ü(7ø%4÷'4û/:ÿ=CÿILà1.Ü3,Û4,Ü5,á4-ç4-ì5/ï4/ö/4÷/2ù.1ù-0ø..ò/+ë3+â7-Ù=0É;-³1#°7,¹D;ìyvÿþŠ‹ÿyŠþqõhxó`söTlüCcÿ7^ÿ3_ÿ3\óDcÒM^ JMb6+TE0W[@^kMc~Kk‡Tt‘[w•_x™`{ždz cvž`s›]s›\s›\tœ]v^wž_{Ÿa| by¡bz¤b|§b{¦_x¦[x§Yz©Y{ªZ~ª]ƒ­e…¬i†ªm‰§s‰¥u„s|•mv‡unmfwe_P=_P=_P=_P=_P=_P=_P=_P=^O<^O<^O<^O<^O<^O<^O<^OÏcWÔh[ÔfYÁPB¹?2¹5)Ç7,Ô:0Ù5,ß2+ç6.ã0,ã4/â7/Ü8.à>1åC4â?0Þ4'æ4*é1)ò2/ð..ï-.ò14ô68ü?CðOTúY^éFKõRW×47ëFJÝ8<åBEÚ7:Î.0Ð15ãIKÑ8;Î8:¸#%Ñ<>Ü89ä;>ê=Aç6<â-4Þ)2â19çÿ/>ý)7ÿ-:ÿ9CÿAHûABã1/ß4-Ü5,Ý5,á4-æ3,ì5/ð50÷.4ù.2ú.1ù-0ø..ò/+ë3+ã7-Ø:.Ì>0´2$±7,±<3çtqþŠŠþŠ‹ÿr†ýj}ñbtð]pôRjûBbÿ6`ÿ5aÿ8_ïKfÁN[z;6Y?.LH/TZ@]cIbzJj„TrŽ[v”^yšc{ždxžas›\p˜Yp˜Yq™Zq™Zt›\uœ]y_zž`x¡_y¢^z¥^y¤\x¤Wv¥Uw¦V{§X~ª]‚¬d„«h†¨l‡¥o†¢r€šmx‘gr„lk}ecu]_O?_O?_O?_O?_O?_O?_O?_O?^N>^N>^N>^N>^N>^N>^N>^N>eQ6cR8aP<]P@ZPG\TR_Zab^otrŠyx˜€¨ƒ°~~²yx±wv°xw³t}Âw€Ã}…Æ‚ˆÆ…ŠÂÀ—–¾ ¼¬§»¶¬´¾³¯È¸©Ð¿¥Õ¡ϼ”Dz‡·kS®\F¤G5©=0ÂH=áVQðVTòNOì?Aë=?è<<ä<;ß=:×=5Ï;1Ë8.¿82Á<5¹:3·>5ÀPDÅYMÅ]PÎgXÐdWÁM@º:-Å8.Ò91Ø3-ß2,è50æ40á2-à5-ã<3çC7æC4â:-à3%ê5*è-&ð0+ð.,ò21ò44ç.,è00áEIõY]öW\ÿpuåDJéHNÞ=Cü[aÿouÝ>Cÿ~‚ÿmqêQTÔ>@Å02Ñ<>øEIî9>ð7=ø=Fô6@è-8ö>Jÿ\hÿmwÿitÿdl÷]gú^kÿapÿ]nüWhî_YãOKâJGÕ74Ò0.Ù54Ó/.Ø95ßD?ãJDáJAÙ@8Ó6/Ö5-Ü71â94ð$0ý/<ÿ1=ø*6û/:ÿ>Eÿ>Cì44â3.Þ5.Ý6-Ý5,á3*è3,ï4/ò5/÷.4ù.2ú.1ù-0ø..ô.+í2+ä6-×9-Ï@2µ1$²6,°7/èpoþˆˆÿŠŒÿkƒücxð]pïZnôPiýAdÿ7aÿ8dý=bæPi°QW^2'RG3DH/PV`P@`P@_O?_O?_O?aQAbRB_O?]M=]M=aQAcSCbRB`P@eS;aP<_O?^QH[QOZSZeapsq‰xxšz|¥~€±€¹}¼xy¹rs¶no²qwÏv{̓̋Ȗ—䤾²±¹½¸²ÌŲÓÍ­ÙЩÛУÛÑ ÝÑ¡ØÌšÒƔզŠ·gŸ_FËzgØte¾G?ØQMøbaìILç>Aä79æ9;ã99Ü75Ù61Û94È95À50ÇB;¹=5¾I?ÄXK·PAËeVÎdVÊYKÃG;Ä:/Í6-Ù6/â5/å3/á/-ß2,â70ä=4à<0Û8)Ý5(å8*å/$ê/(î.)ð0-ï20ë40è51æ40Ó8<åJNõY]ëOS×7?×6>ùX`ÿ~†ÿ~†ÿowÿgoÿipÿfjõ\_ïY[ô^`ÿRYÿCKü8Bü7A÷1>ï+9î/>ñ=IÿS_ÿ`kÿgpÿepþboÿbpÿ`oÿ[lìTOßFA×85×31Ù10×/.Ú21Ü86áD=ÜB:Ø?7Ö<4×90Û81á83ä84ô5=ó4;õ3;÷4<ø5;ó49ë33ã1/Þ3,Ý6-Þ7.à5+ä3+é2,ñ1,õ2.ø/5ø03ú/2ú.1ù//õ/,î3,å7.à@4Ë9,½7+®/&·<5ÒXWÿ˜šù~ÿhÿe|ö]rîRhòHeÿAeÿ9bÿ5`üJlÕRd‰==K. >>&?I.IO5]]EWlAcxMqˆZx’by–`t•\r–Xq˜Wl•Sm–Rn—So˜Vr™Xt›\uœ]uœ]tœVtWv Xw¡Wv¢Uv¢Uu¡Tt S{¥[{£\zŸ\u—Zn‹Uc}MXrCSj>AW1?U/`P@`P@`P@_O?`P@aQAbRB`P@_O?`P@bRBcSCbRB`P@fVF_QD\OF_TRcZ_f`nmkƒwv˜wy¢{}°}¸x|»qt·lo¶ln¸oq»suÙ|}Ù‰ˆÔ˜—Ш§Æ¹¶½ÉƵÓÏ©Ý×£âÜžçßžæÞäÜžâÙ ÙÒœÑʖѼ¸€¦~dÄ‹wÉ}m¶VJÓ`Y÷qnîZZêJLä>@é<>ì>@è:;ã56á34Õ=:Ë73Ê?8¹6.·>3¼L@³I;Å^OÛp`ÒaSÄH<½5)Ä0&Ö5-Ý4-Ü/)â43å95å<7à<3Ü8.Ù5)Ý5(ã5*í6.ï4-î1+ë0+ç0,ã2,á4.Þ5.Ò9;×>AäIMóW[ü\dü\dþ]eÿ`kôR]ïMXñQ[ÿ_gÿjqÿflô[`ëRU÷07ó+5ô+5ù-9ó&5è/ç'6í7DüP\ÿ[dÿclÿemÿepÿdoý[hõP^åFBÞ<9Û64ß63á53Þ20Û2/Û62à>9Û>7Ö<2×:1Ú91ß82å95è96é9;ê7:ë7:î79î79ì57å31Þ3,Û4,Û7-Þ7.á6,å2+ì1*ó0,ø1.÷05÷03ú/2ù.1ù//õ/,î3,ç6.ß=2Ò>2Â8-µ2*·82ØZ[ÿ“õw{ÿa{ÿ^v÷WqöOkøFfý=bÿ:cú=cëLhºJVw<8F5#7=#9C(DH/UP`rJnƒXw_v“]t“Zp”Vn•Tk’Ok”Pl•Qm–Ro˜Vr™Zsš[sš[tœVuWuŸWuŸUtžTržQqPq›Qn˜Pl”NhŒLbFXu?Nh8F]/@W+@W-@W-AX.YL<[N>^QA^QA^QA^QA_RB`SCaTD`SC_RB`SCaTDaTD`SC^QAbUM^QK[QPcYakesqm„vu•y{¤y{®y~¶w}»ns·ei°bf°jn¸rvÀ}zᇃᖔߩ§Ù¼¸ÏÍÊÃÝظçá­êå¡ïéŸðêžíæžéá¢âÛ¤×Ï ËĘ´°“¦œ˜„k§„p¥p`œRG»]UÞmi÷usð^_çHLæ@Dí@Dí=@ë7:ç36Ü>;Ô;6ÔA:Â70·7.µ?3­=/µG8Új\Þj[×\MÊB6Å2(Ñ4+Ú6-Ú1*Þ44éA>ìGCà=6Õ2)Õ1'Ú2'Þ0%è3*é1)ç.)æ/)ã2,â7/á=4âA7Ã-,Ê43ÜCEðVXú^bùYaóS]òP[èFQêHSðNYü\fÿmvÿmtôY_ÜAGó*2õ,4ý1<ÿ1>÷*9ï&6ö6EÿJX÷ISõOY÷W_ü_fÿdkÿai÷Q[éBJÞ95Þ63ã75é<8ë<9ç85â51Ý60Ý:3Ù;2Ö90×90Û81á83ç:6ì:8à;9â:9ã99ç98è88å84à40Ú3+Ú6,Ú8-Ü8,á6,å3)ì/)õ/,ú0.ô15õ13ø02ù.1÷//ó0,î3,ç6.Ý9/ÛD9Æ9/»4.´0,â`bÿƒˆônuÿ_zþWsúPmþLlýDfø8_ö9_ðGf×ReDJi=4K@,7@%8@(ED/LE2N^9YkEg|Qr‰[tZqUmRkMi‘Kh‘Ki’Lk”Pm–To–Up—Xq—ZuWuWtœUrœTpšRm—Mk•Kj”LdGaˆE\~AUt;Li3E_/AX*>U'B\/E_2Ic6WJ:ZM=\O?^QA]P@^QA_RBaTD`SC`SC`SCaTDaTD`SC_RB]P@YNR[PVbXcjcsqm†vu•xz£z|­w|´sy·mr¶bi±]c­ag±lr¾v|È‹‡æ”‘褡淴áÇÄ×ÕÒËáÞ¿èå²ëç¨ïê¦îé¥éã¥ãܨÛÒ§Ëß¾µ–Ÿ§˜š…‰v—‚q—se™cW³i`Ïrmû‹‰õutë[[çKNéCGî?Dî;?í8=ß:8Ý;8ßD?ÓC;Ã:0¹;/¯7)¦2#¾J;ÚbRék]ÛSGÉ9.Í3)Ö5+Ø4+Ù33ñMLý[XíKFÙ80Ö3*Û4+Þ2(à-&á,%á,%ß,'Ý0)Ú6-Ø<0×?2À0(Ä4,Î:6ÙCBßFHàEKäGPìLVñQ]öVbøXdû[gÿgpÿmuôY_Ø=Cñ.2ò-4ô-4ò*4í%2ì(6ûô@?ð<;ç85à72Ü92Ø:1×90Ù80Ü71ã73ê86ì87Þ<9ß;9â:7ä;8æ:8ä84Þ5.Ø4+Ù7,Ú8-Ü8,á7*å3)ì/)ô/)ù/+ó25ô23õ12÷/1÷//ó0,î3,ç6.Ü8.ßG<É90¾3.´-*îfjÿy€ójrÿ`{ýTqþKkÿFjÿ=cö3[î<^äPhÄXe…DBbE7WP=DH1@D-JH3JB/IW4Sc?btLmƒUp‹XoŒRkŽNiŽKgIg‘Ih‘Kj“Mk”Pm–To–Wp–YtœVs›Uq™Sn—Qj”Lg‘IeŽHdG`‡D]AWy=Rq8Mi6Lf6Ne7Pe:Lf6Oi9Sm=UH8WJ:[N>\O?]P@]P@_RBaTD_RB`SCaTDaTD`SC_RB_RB_RBTLY`Xgnf{tp‰xt•xw¡xz«y{´sy·jqµ`g¯\b¬`f°kq»v|Æ~„Ε”äžžè­­é½¼æËÉßÕÓÔÝÜÊãàÁåâ¹çã¶æß³àسÚÑ´ÐůÀ´¤¯¥™”œ‰ˆ†y‰}qwk›sk§ngºoi扄î~ósróedòVYòLNðCEî>Aå95â:7äB=ÞE?Ì<3Æ=3ÂB5­1%¬1"ÇI;ÛYKÖN@Ì=/Î8*Ò6*Ñ3'Ö34õUUÿkhú]XâE>Ü;3ß;2ã80â4-ä1,â1+Ý0)Ö/'Ì0$Æ/$Â0#Ã9,À4'Á3)Ë:5×CAÛEGÛBGÛ@HàDOìOZóVaòVaú^iÿgoóYaÝDIð88í55ï26ð18ò3;÷9CÿHSÿVaä6?Ý4;Ý7;êAFøKOüIMô;@ê05å61ë95ñ;8ó;9ó;9ð:7é73â70ß;2Ü;1Ù;2Û:2ß82ä73è64ì65á<8ã;8ä;8è:9è;7æ95á6/Û4,Ú8-Û9,Ý9-á7*å3)ë0'ò/)÷0+ð45ñ33ô22ô01ö0/ò1,î3,ç6.Þ7.ÞD:Ê7/¿1-¾21÷jpÿrzøhrû]vúPmÿCfÿ_L;_ZFQP;KI4PI6MB0DR1M[8[kFf|Nm…SmŠPlŒMhHfŽGgHg‘Ii’Lj“Ol•Sn•Vo•Xt™Vq˜Un–Pj’LfIcŒFaŠF_ˆDZ@X|?St;Pn8Pj:Tk=XmB[pEUp=Vq>Wr?RE5UH8XK;ZM=[N>\O?^QA`SC`SCaTDaTDaTD`SC`SCbUEdWG]Ulje|yu}yœzy£wyªvx±sw¶lqµcj²[c¬]e®hp¹w}LjІՙܡ¦à¯²å»¿åÆÇãÍÏÞÔÓØ×ÖÑÙ×ËÙÕÉ×ÑÅÒÉÂÌÂÀŹ»´§®¥˜¡‡Œ†xzuwvqulg~mfŒoib[œa[¾sm×zuï{ü|yÿrpýccöSTîHHñB=ê>:ã<6àA;Ñ:1ÒD:ÝTJÂ>2¸6)¼:,Â=.È?/ÏA3×C5×?1Ñ8*Ð23èLMú_]ñXSßD?Ø;4Û81à70æ92ç92ç92â92Ú9/Ñ9.È9+Ä8)®)¸3"È@2ÓI>ÒE>Ë;:Ì7;Ð9@Ï8AâHTïUaðYbõ^g÷`iêU[ØCIè?:ë?;ñAAúGJÿMRÿQYÿT]ÿV^á4:Ú/5Ú03ç7:ô=Aù:?ø48÷/2é61ï95ð95í41í1/ê20ç40á4.ã<4à=4Þ=3Þ;2à93ä73è43ë33æ:8ç98ê88ì89ì87é75ã4/Ü4+Û7-Û9,Ý9-ß7*ã2(è0&ï0(õ0*î45ð43ó32ó11ô1/ò1,î3,è5.à90Ù<3Ì70Á0-ÑAAÿnuýku÷coïSkóIfÿ;cÿ1`ÿ3bÿRJ7QF4MB0AL.GU4Sc>`rHgMj‡MjŠKh‹GeFfŽGfHgJi’Nk”Rl”Um“Vq–So”Qj‘NgŽKcŒH`‰E_ˆF_†G\‚E[~DWxAVr?Uo?YpB]rG_tKYtAYtAXs@NB2QE5UI9WK;XL\P@^RBaUEbVFbVFaUE_SCaUEfZJj^Nkg‚up|x›{y¡wx¨vw­pt±jo±ah®^f¯_g°em¶pxÁ~…͉ؖܙ¡Ï ¨Öª±Û´¹ßº¿ß¾ÂßÂÄÝÅÆÛÆÃÖÅÁÒÁºÌ¼³Æ»¯Å´¨¾¦˜±—‰¢†‡‰qqstpqogevhe†nj`Y”e_š[T·g`×tnî{vÿ{wÿwsÿhfù[ZÿQKöGBè=6èC=Ø;4ÛG=ê\RÅ;0Ä<0½7+¾6(Ç>.ÑD3ÔC2ÔA1×A0Ò8:Ø>@ÜDCÛC@Ö=8Ó91Ø7/Þ7/å:3æ93å:3â;3Û>5ÕA5ÑE6ÌG8¬.¼;%ÌK8ÑL=Æ=3»0+¿10Ë8>ÕBJáKVëU`ðZeð]eìYaßLRÐ?DÑ4+Ö8/ß<7ê@@ñDFôEJñBIî?Fâ5;ß26ã36ï8<õ79ù14þ-2ÿ.4ë40ð95ò64ì0.è,*è/,è2.á2-ä=5à=4ß>4ß<3ã:5ç85ì65í55ì57ì57í57ï56ï56ì42å2.Þ1*Þ7.Ü:-Ý:+Þ8*á3(ç1&í1(ò1*í55î53ñ42ó11ó1/ò1,î3,è5.ã;2Ò4+Ò;4Æ20çUVÿpxùcnñ[gãKbóEfÿ7bÿ+]ÿ1bÿ@hÞKe­RYd8/ZI7SN:UN;[P>VI8M@0MA1=H*CN.K[6Xj@ayGf‚HhˆIgŠFeŠDc‹BcEeŽHgLh‘Oi‘Rj’Tn“Pl‘NhLd‹Jb‰H_ˆF_‡H`‡H_…H_‚H]~I]yH]wH`wKcxOdyP[vA[vAZu@MA1PD4SG7VJ:WK;YM=[O?]QAcWGdXHdXHbVFaUEcWGj^NpdTvq‘yu˜xvtsŸrr¤su®lp¯bg«Za©^f¯em¸lt½u}ƈДڕœâš¤ÈŸ©Í¦°Ô¬´Ù°µÛ±µÚ²´ÚµµÛ³±Ö²®Ñ®¦Ë«¡ÄªžÂ¦˜»™‹®‹{Ÿ|y€dbgidhbY\g[[xeauXRe]ˆOHŸVO»aY×jcóvpÿ}zÿwuÿljÿZUÿPJñD>ôMGàB9ßF>êWOº,"¼2'½5'Ç=0ÑE6Ë>-Á2!É8%ÙF4ÞDFÒ9;Ë32Ë62Ó;6×<7Û<6á<6æ;4å82à5.Ø4+Ï5+Ê8+Ä<.Â>/ÑU;ÅI/»='½;+Ã=2Ä;5Â65Â37ÜKRÞLVâOYåS]éWaæU\ÝLSÒCGÉ5)Ð8-Õ81Ú64Ý55ß58á4:ß28å8<å6;ì9=ö8É53øceÿpyô\hêR_ÞHaõGhÿ:eÿ*]ÿ/aÿ@hÓE]–AFQ-!UJ8PN9OH5\O>YH8L<-NB2:D)?J*GU2Rd:]sBcEf†GeˆDcˆBa‰@a‹CcŒFeŽJfMgPhRlPkOfLcŠIaˆG_‡H_‡H`†I\‚G]€H]~I`|Ka{Ld{Of{Rg|S]xC^yD_zEAC8CE:IF=OH@RGAWI@]M>`O=aQ:aS9`T>_VGaZTfaeljwro€wožzt¢~wªzu«ro¨hf¥a`¢^^¦ba­hg·qoÃ|xÏ…€Ú‰ã—í–ó¢žÙ£ŸÚ¥¡Ü¦¢Ý§¡Ý¦¡Û¥ Ú¦žÙ¥Ö£œÒ¢™Ð¡˜Íž–É—ÁŒ‚´ƒy«mrvghlc_`e[ZlYUtUP€ULVK–RG¨ZN²ZP½\SÔmdç|tò…~üˆðxyõyyæabÜPQ×EEñYVÎ61È1(Ç5(Ä7&Â6%Ã8%Æ9'Ì:+Ð<.Õ?1Ô8+Ö=/Ø?1Ó;-Í5'Í4&Ø:.ã?5à90á90Þ7.×7+Ï7)È;)Ä@+ÁC,Ä;3È?7ÍD<ÏF>ÌC;Å<4»2*µ,$Ä>5ÍG>×QHÞXOá[RßYPÖPGËE<Ìÿ)<ö*6í.6ç48å;;Ü94Ü:5Ý<4à;5ã:5æ93é73é62ì25ì44ë54è64ä71ß7.Ú6,Ø6)Û9*Û:(Û:&Ü9&ß8%á8%â7#â7#í41ï4/ñ4.ó3.ó4,ï5)ê6(å8*à:.Ø7/×96Ý>BÿlyÿasþRlöGdÿIjû5Yÿ5]ÿ;eú=cãPj©LVT)":1 9<)EF4RL>PH;BC39E15K4FGHJ#MQ,U\:\jGcuOf}QeNc…Hb‡BaŠ>cŒ@eDjIl‘Nm‘Qj’IiFgŒFf‹Ff‹Hf‰Ic…Ic‚GdƒJdIc~Gc~Gd€FfFe~Dc|BX}8[€;^ƒ>[K>^M;`O;`Q:^S?^WGa\Vhcinlyrqƒtnšvpžtp¢pm¢gfŸaaŸ]^Ÿ\\¤ed°kjºtrÅ}{φ‚ÙŽˆà”Žè˜’ì›—Òœ˜Ó™Öžš×™Ö—Õœ–Ò•Ñž–Ñœ”Íœ“Ê›’Ç™‘Ä“‰»ˆ®€w¦tmtkdkf]`e[YiZSoWMzVJŠVI›UK°\RºYRÁXRÓf_Þqjãvoêwý‡…ÿˆ‡÷uuðfdäTSíYUÇ2+Â/%Æ7)Ã7&À7%Á8%Ä9&É:*Ï;-Ó=/Ö8,Õ9,Ó:,Ò:,Ñ9+Ñ9+Ô8+Ø8,ß;1à90Ü8.Ø8,Ð8*Ç:(¿;&¼;%¿4-Á80Æ=5É@8ÊA9È?7Å<4Â91¾5-Ç>6ÑH@ØOGÚQI×NFÌC;À7/Ê8Ñ9"Û8)å4,ï./ö*3û(7ÿ(:ÿ+Bÿ*Bÿ)Aÿ&Aÿ$@ÿ >ÿ=ÿ<ÿ8ÿ9ÿ$;ÿ);÷-9ï29ê7;å;;Ü94Ü:5Ý;6à;5ã:5æ93é73é62ì25í36ë54è64ä71ß7.Ü5,Ø6)Û9*Û:(Û:&Ü9&Þ9%á8%â7#â7#é4-ê3-ì4,ì4*ì4*ë5(æ6)á7*ÞcŒ@eDiŽHkMlPl’IjGhGf‹Ff‹Hf‰Id†JdƒHe„KdIc€HdHeGeGfEd}C\<_„?b‡B69.:<1??7E@:KB=OE/Ô>/Î6(Ë/"Ú:.Û7-Ù7,Ö8,Ñ9+É:)Â9&¼8#¾4*À6,Â8.Ä:0Ç=3Ê@6ËA7ÌB8Å;1Ê@6ÏE;ÐF<ÒH>ÑG=Ê@6Â8.Í6!Ô7&ß7,é3/ñ03ø,5ý*9ÿ*<ü'=ü'=û%=ù#;û!:ü8ü7þ7ÿ6ÿ6ÿ#8ý*;ù1<ñ6=é9;ã;:Ü86Ü:5Þ;6à;5ã:5ç85é73é62ï26î47í55ê65å61ß6/Ü5,×5(Ù9)Ù9)Ú9'Û8%Ý8%Þ7$à7$à7$â4+â4)å4*å5(ã6(â7&Þ7'Û8)Ý=1Ï2+×98ÿltÿ]nþPið=[ÿJlÿ5\ÿ=eü4[ô<`êTq«?Oa#(H1+79+-8'18&:;)B=*A<(@>)@B*?GY`4s~T€Œfw‡bi~Ub|MaI`ƒC`…?aŠ>cŒ@hŽEjJkMlPn”Kk‘HhGgŒGgŒIh‹KfˆKf…Je„Ke‚Jc€HeGf‚Hf‚GeFcDb‡BeŠEhH06*58-;<4A>9G@:KB;RE.Ð?.Ë8(Ç/!Ò6)Ó5)Ô4(Ò6)Ñ9+Í<+È=*Ä;(Æ9/Æ9/Æ9/Æ9/Ç:0È;1É<2Ê=3ÒE;ÒE;ÐB8Ë=3Ë=3ÏA7ÏA7Ë=3Ñ4#Ø6)â5.ë31ò/5÷+6û(7ü)<ù&9÷&;÷&;ø'<û&<ý%<ÿ$:ÿ#:ÿ!7ÿ"7ü%7ù-9÷5>ñ:?ç9:à87Ü86Ü:5Þ;6à;5å95ç85ê65ë54ñ27ð37î66ê65æ72á6/Ü5,×5(Ø8*Ø8(Ø9&Ù8&Ú7$Ü7$Ý6#Ý6#Ù6'Ú7(Û8'Ü9(Ü9(Û:(×:'Ö:+Õ;/Î3.éIKÿo{ÿVjøDaö=_ÿCiÿ/[ÿ7`û=cëLlÆOe€0=G >3--3'+8'2=,=B.B@+C;$G="MA'R_*q}MŸp—¨|ƒ˜mj„W_{J]~E_ƒCa†@b‹?fCk‘Hl‘Lm‘Qm‘So•Ll’IiŽHhHhJiŒLhŠMiˆMf…LdƒJdGe‚Hf„Hh„If‚EeDf‹FiŽIl‘L-3'17-7:3<;6B=9G?UOCZUQa_dhgukkƒllˆjg’baXV‡PP†QQXYš`cªfj´orÁuxÉ|Ѓ„Ö†‡×‰ˆØŠ‰×Œ‰ØŒŒÌ‹‹ËŠ‰Í‰‡Ð‰…ш„ÑŠƒÓ‰‚ÐŒ„Ï‹„È…Á†º†²‡¥}x–vpŠ“ScƒQ\qUT`^RVcOTbH_]DvUB’LB¼RRÖPWàPYé\dèejâljâwqâvláphõ~vÿ‚{ÿ‡~ôkaÉ?2À8(À;(¿='¾='¿='Â;'Å:'Ç8(Ê8)Ü8/Ú7.Ô8,Ï9+Ê;+È;*Ç:)É7(Ï9+Ñ7+Ô8,Ó7+Ï7*Ì8*Ë<,Ë>-É=0Ê<0Ê<0É;/È:.Æ8,Å7+Å5*Ð@5Ð@5Í=2Ë8.Ë8.Î;1Í:0É6,Ò.$Ù0)ä2.î23ô/8ù-9û+;ü+>ü-?û.?ú0@ü/@þ/Aÿ.?ÿ-?ÿ->ÿ)9ý)8ø*7õ0:ó6=ì9=ã77Ú53Ü86Ü:5Þ;6â:7å95ç85ê65ë54ò38ñ48ï56í76æ74á6/Ú6,×5*Ö9*Ö9*Ö9(Ø9&Ø9&Ù8&Ú7$Ú7$Ô9%Õ:&Ô<'Õ=(Ô=(Ô=(Ó>*Ó=.Ð8-Ù;8ÿ^eÿaqÿPi÷;\ÿAiû6aÿ/]ÿ.WøIjÛYq•>NX'-?+,730*1)-9-5@/:B+<<"B;VG(iV6v‡P£lª¾‹¨¾Ž¥wo‹[aK^F`…BcˆBeŽBj“Go•Lp•Po“So“Uo•Ll‘KiŽHgŒGiŒJiŒLi‹NhŠNf…Je„IdƒHfƒIg…Ih†Hg…Gf„FgIi‘Kl”N*2%.4*470894<;7B=:HA;KD(À>(Á=(Ä;(È;)Ì9)Î8*Ú3+Ù6-Ö:.Î:,Ç:)Â9'Ä;)É=,Í>.Ö@2ÙA4×=1Ï7*Ê4&Ê8)Ë<,È:,È:,É;-Ê;-Ê;-È9+È6)Ç5(Ê6*Ï;/Ò>2Õ>3Ö?4Õ>3Î7,Å.#Õ)%Ü-*ç02ñ29ø0;ü/>þ/?ý0Aú0@÷1@ö2@ö0=÷/:ù-9ú,8ü*7ý/<ù/;õ0:ñ2:í6;æ68ß55Ù42Ü86Ý:5ß:6â:7æ87é77ê67ë54õ49ó49ð69í76æ74ß6/Ú6-Ö6*Õ7+Ô8)Ô8)Ô9'Õ8'Õ8%×8%×8%Ï:$Î<%Î>&Í?'ÍA(ÍA*Î@,Ï=.Ð71éIKÿgrÿOdÿHfû7]ÿAmý/_ÿ1^ø1XåOj¹Wfh39@*,?994443524925>-2<#29ECl`8Ž}R™±u©Á‡µÎ—­È•’®}v”be†Q_ƒF`…Bc‰@gDo•Jr˜Or—Rq•Up”Vo•Ll‘KhGf‹Fh‹IiŒLi‹Ni‹Og†Kf…Je„If…IhˆIjˆJi‡Gg…EhJk“Mn–P(0#*2'/4-350664<87@<9C>8IEû3>ú0>ú0@ø/?ò.<ï/<í/9í07í.5ï,2ò+2ò)/õ1;õ3<ò5;ì59ç47á55Þ65Û75Ü86Ý97ß:6ã:7æ87é77ê67ë46ö5:ô5:ñ7:î87æ74à72Ù6-Ô6+Ñ8*Ð8*Ð9(Ð9(Ð9(Ñ8&Ñ8&Ó8&È:"Ç;"È>$Ç?%ÇA(Ç@*Ê>-Î;1Õ:6üU\ÿ_oÿGcÿ>bÿ8cÿ6gÿ0cÿ4\òCbÈMa…BIL44:97<<>948>58<7379+3="8DS[,ƒPª£o«Èˆ¯ËŽ¯Ì’¦Ã‘¯}{™ggˆQ^‚E^ƒ@c‰@iDo•Js™Ps˜Sq•Uo“Un“MkJgŒGeŠEgŠHh‹Ki‹Ni‹NfˆLd†Id†Ig‡Hi‰JjŠIi‰FhˆEi“Kl–No™Q&.!(0%-2+130333756:97>;6GD=DD*½<'»8$¾5#ÑB2ãOAäN@ØB4Í7)Ë7)Ð>/Ê;+É:*Ç8(È6'È6'Ê6(Î8*Ð8+Ó;.Õ;/Õ9-Ó5*Õ7,Ü;1Ý<2Ú9/ë7:ñ8=÷:Aü8Bü4A÷.>ò,;ï,:í/;é19è38é58í57ñ48ô36ö45î49ï6;í9<é69â45Ý33Ý86ß;9Ü86Þ97á98å99æ89é69ê67ë46ö5:ô5:ñ7:î79ç85ß82Ø7/Ó7+Ð8+Í9+Í:*Ì;*Í:*Í:*Í:(Ï9(Ä: Â: Ã=$Á?%Â@(Ä@+É=.Í81ßhŽCo•Jr˜Or—Rp”Tn’To“MkIgŠFeˆFf‰Gh‹Ki‹Ni‹NfˆKe‡Jd‡GeˆHgŠHh‹Gh‹GfŠDj”Lm—OpšR(0!'/"(-&+-*.0/333775:94==5?@8DE?JLKQQYVWiZ\s]^|YW†[Y‹^]–ee¥nn¸wxÊ€Ú„„䊌ðŠŒðŠŠì†‡ä‚‚Ü€Ô‚€Óƒ‚Ò€„ĄǃƒÉ„„ΆƒÒˆƒÕ‹ƒÖŒƒÒŠ€ÇŠ€½‰±…~ €xwpxkeec^XpZMm[Mi\Kf^Kd_IcaHfbGl`FlR;„UA£^O¿aYÑYXßPTñQ[ÿXbôkcæYRÔD<Î70Ñ7/×;/Ø/Å@/Á@-¾=*¼9'Â9)¾0"êVJáJ?Å.#Ñ=1Î2Ü<0Ù7,Û7-â>4éE;øAFó8?ð3:ö4?ö2>ñ-;ï,:í2=ì7@æ5;ã68å78é99ð:9ñ86ò65ï==î<<ê:<æ89á77ß76Ü75Ü75Þ97á98ã99æ::é9;ì9<í9<ï8<÷6;ô5:ñ7:í9:è:9à;5×90Ï7,Ë7+È9)Ç:)Ç:)Ç:)Ç:)È;*È;)Á9!Ä>%½;#µ5»:$ÈE3Í@6Ê0.ÿ^eÿVgÿHcÿ;\ú0Xø/[ý5cÿc‡?iDn”Im•Ll”Nk’Qj‘RjŽHfŠDc†Bc†Df‰Gh‹Kg‰LdˆJg‹MhŒNg‹Kf‹HeŠEf‹EjIm“Jp›SrUtŸW*0")/#).'+-(-/.222553782;<4>@5BC;HJGOPTSUaXYm[[s\Z‚^]‰da–kj¦us¼}Ї‡á‹‹íŒòŒ‹ñ‰‰í…„ ڀ~Ò€σ€Ï…†Æ†‡È‡ˆË‰ˆÎ‹‡ÑŒ†Ð…ÎŽ„ÉŠ€½‰³†{£‚x‘{s€tknkd^e\SbaLb`Ke^Kh]Ii\Ij^Hk_Gm_EraG{]CŽ[Fª[LÆWPàQS÷PXÿS`ìWQãKFÛ>9×50Ú5/Ý90Ü8,Ø8*Ó8&Ñ8&Ñ8&Ô8)×7)Ü5,à3,ã2,Ë1'Ë4)È9+Æ=-ÄA/Á@-¾=*¾9(Â9)Ë<.åQEÜH<È4(Ì:-È:,Á5&Ê=+Ê=+Ê;*Ì;*Ë:)Î8)Ï7)Ï6(Ó7*Ö8,Ù7,×3)Õ1'Ø1(ß7.å=4ûBHò7>í07ï/:ò0;î.;ì1<ê6?ã6<Ü36×32ß:8îEB÷JFøEAõ?<è:9æ:8å97â96á85à85á98á98à87â88å99ç9:é9;ì9<í8=ì7<ô5:ò59î68ê88æ:8Ý:5Ó91Ë7-Æ8*Ã:*Â:*À;*À;*Á<+Á<+Á<+½9"Á?)¹;$²5¸;'À>];2@>/3A05?4E=:X;?T-0X51ZI7bjEu[Š±pšÄ|žÈ|š¹}š¹€™·ƒ©yr`YuESq?\{B_>b†>iCm“Fl”Kk“Mh‘MhQhŒFeˆDc†Bc†DgŠHiŒLhŒNg‹MiOiMiŽKgŒGgŒGfŽGj’Im•LnœQoRr U-1"-1#,/&,.).0-11/34/45-9;0<>1@B5EH?KMLQRWUTbXWi\Yx^]fcŽpm¢zx¹…‚ÏŠáíŽñŽŒïŠˆé‡ƒá~Õ|Í}È}Ç…‡ÄˆˆÆŠŠÊŒŠËŒŠËŒ‡ÇŒ„À‹‚¹‰€¯†|¡€v‘{p€ujpod`i_Ue\MXeK]bKa_Jh[HmZIp[Hq\Go]EtcItZ?‚V= WDÅYMäTSûNTÿIUß@<Þ<9Ý84ß61á6/á6.Þ6+Ú7(Ö6&Ó8&Ó8&Õ8'Ø6)Ý5,á3,ä1,Ç5(Å6(Â9)Á<+Á@-Á@-À=+À8(Ã5'ÜJ=ÜE:ÕA5Îë7@ê=CÜ7;áAAìNK÷ZUüZUùRLïB>è62à72à74à74ß74à85á96ã;8ä::á77ä88æ89è8;é9<ë8<ì7<ì7<ò38î47ì57ç77â:7Ù:4Ï8/Ç7,Â8+¿:+½;+»<+»<+»<+»<+»<+º9$¾@*³9$°7$¶;+´2%Ã40îOTÿZiÿH`ù8Uó6Vó>]ñFfçHfÞEat?9e?6QA2@C04?.29)>5,O61K*#W:,j\Bˆ_«t”½{“ÃyÃv•²|œ¸…™µ…€šm\uKHa7Nh9[xB_}?c„?hŒBl’Ej“Gh’JgLeMe‰Cd‡Cc†BeˆFh‹IjŽNkOjŽNkOkOiMhJgHi‘Hl•Ip™Ms¡Vt¢Wv¤Y25$13&02'01+12-23.34.46+9;-;>-?B1DF9IJBNNNRQWTR]XVd\Zoda~nl”zw®„‚ÄŒ‰Ø‘Žå”‘ì“펋扅ڂÎ{Å}¿‚}¿ƒƒ¿……Á‰ˆÂŠÃ‹ˆ¿‹„¸‡®…}¦…{€vŽzm~sfmoa`k^Vi[NgZJVdJZbJa_JjZJpYIsYJtZIs]FqY?tU9†T;§ZFÌ\PæRNóEGù:AØ3/Ü41á51ä50ã5.â4+à6)Û8)Ö7$Ó8$Ñ8&Ô9'Ø6)Ý5*à3,ã2,Â8+¿7)»7(¼:*¿=-Â>/Ã;-Ä8+Æ3)ëTKÔ;3Ì8.ÑA6¾4'À<-½>-Ã7&Ä8'Æ9(Ç:)Ê8)Ë7)Ì6(Í3'Ó5*Ô3)Ö2)Û4,ã:3é>7ì?9ë>8è47ì59ï6;î5;ê2:æ39ä7=á<@óUVûc`ÿnjÿidóVQäA<ß61à3/Þ71Þ71Þ71ß82á85â96å97æ::å78æ89è8;é9<ë8<ë8<ë8<ë8<ñ48î68ê67æ87à;7Ö<4Ì9/Å8.½9,º;,¶;+µ<+´<+´<+³;*³;*³:'·@,­8&¬9'±;-«+"Ã54ÿ_gÿSdýE]ó;Uí1B2SE*okHŠ“f•¬t´t‹¹q‹½t¡¹‰¡¸Š§}l‚\K_:BV1Lc7Yq?_{@dƒ@i‹Ak‘Di’Fg‘IdJbLc†Bc†Bd‡CgŠHjMkOm‘Qn’Rj‘Pj‘Nj’Li‘Jg‘Gi“Gm—KqœMu¥Yv¦Zx¨\78(78*66,56056156167/68+;>-=@+@C.DG4IK=NNFQPNSQTVUSYY[a_lkius›€}´ˆ†ÈŒ‰Ö•’ã”äÞ‹‡Ó„Æ}º|µ€{±~¸‚º‡„»‰…¸Š„²†¨z›€xs‡znzrfjm_\j[Tk[NjZKjYI^bK_aKe^Kk[KpZLtZKw\Kz[G{WAƒS=—U?³XFÍSFÝF?å76ê01Û2-ß3/â5/å4.ã2*à2'ß5(Ü9(Ô7$Ð9$Ï:$Ñ:'Ô8)Ù7*Ý5,à3,½>-¹:)µ6%·8'½;+Â=.Ç;.É6,Ñ80ö\T×=5Ë4+ÏA5¸3$·:(¹@-Â9)Ã:*Æ:+È:,Ê;-Ì:-Ï8-Ñ7-Ñ3*Ò1)Ö1+Þ71ç;7ë>:è;7æ74é77ï;<ðê7=ê7=ð69î79ê7:ä::ß=:Ö=7Ë;2Ã;/¸9*´;*±<*¯<)­=)¬<(¬<(¬<(«:(¬=*¤9'¥:*©9-«0)ËAAÿgr÷L^÷E[ðBYèF[ÛN^ÈT]´VW§SQSU@LN9JG4JE1FD-AA'>C#@G%MU.^g,?=.==1==5=<7;<6;=2;=/?B-@D+CG,GI1KM8NOASPITQLYXDZ[M_^Zgepqo‡{y¡ƒ€·‡…ƌӋՊъ…ǃ€¹~z­zw¤{u¡zw°|y°€|®~©‚~£y•|t‰zrvkqrffm`Zl[QlZNl[KmZKmZIg^Mi]Mi]Mj]Mn]Ms^My^M€[I“`OšWG§N@¹I=Æ@5Ð6.Ù0)á0*á51â5/ã4/â4-à2)ß3'Ü6&Ú;(Ð9$Í;$Ì<$Í<'Ñ:)Õ9*Ù7,Ü5,ºA.´;(¯6#°5#¹:)Â=.É;/Í6-Û>7ùZTåHAÐ90Ì@3¸6&«4 ±>)¿7'¿7'À7'Ã7(Å7)É7*Î7,Ð8-Ù<3Û:2Þ93å<7ê>:ê=9ç85ã41è96ë<9ê::è8:ì>@øORÿccÿqpùheàUPÈ=8¿2+È5.Ö;7à<:â:9à<3á:2á:4á83ã73ä65å55æ68é69é69ê7;ë8<ë8>è7=è7=ç6<ð8:ì8;è8:ã;:Ý>:Ó>7É<2À+>467>O#Jh4gTt•\„›c‹™dŽ›f‘¢l•¬t•²x„”pn}\Q`C=J09F,BO3O_;Xi=czDgBkŠDk‘Dh’Fe‘F`G`Gf†Ci‰FjKlMlOkOm‘Ql“Rm”Qm”Qm–Pl–Lk—Jm™JržOu¢Qy¬]y¬]x«\CB0DB3DB6EB9CC;CC;BB8AD3CG0EH-GJ-JM0OO7RQ?TREURI[\:\\@\]Kaa_ihvrq{z¦~µ†‚¿ˆƒÃˆ„Á„¸{­ysŸtp•qmŽol£rn¡tq wršwrtoƒskxrilmb^l_Vj\OlZLn[Lo\Kq\Kq\KrZNq[Nn\Nl_Ol`PqaQy_N†[KŸ_S¦OE°A8½:2È5-Ï1(Ø1(Ý5*â70á6/á4-á3*à4(ß5(Ù6%Ô9#Í;"Ê<$È>$Ê>'Í<'Ò;*Õ9,Ø8,·D/±<(¬5!­4!¸9(Ä<.Ì9/Ï5-Ú83ñNIòSMÙB9ÌB5½@.¥2¬?(À;,Á9+À8*À6)Å7+É9.Ï;1Ô;3áD=ãA<ä?;ç>;é=;é;:è88ç77æ93æ95å84é;:ôJJÿ\[ÿdc÷caË=9¿82»4.Ã81ÓB=ÞE@ß=;Ù42â;3â;3â92ä84å84æ66é77é77ê69ë6;ë6;ë8<ë8>è7=è7=ç6<í68ê69æ89à;9Û>9Ñ>6Æ<1¾<.²8)®;)ª;(¦;'¤;&¡;%¡:' 9&ž?-”7%š=,—:)˜3'ÂQKíkmï\fïN^ìI\àHWÎJU·SS¡]RŒfQ‚jP=Sg{Fh‚Cl‹Ek‘Di“Gc‘Fa‘G^Gi‰FlŒImNn‘OlOjŽNkOk’Qp—Tp™SpšRo›Po›NqNv£Rw¦Uz­^z­^y¬]GD3HE6HF9HE±61Á3/Î5/Ö5+Ù7*Û8)ß6/ß4-à3,à4*â6*Þ7'Ø7%Ï7 Ì<"È>"Æ>$Ç?'Ê>'Ï<*Ó:,Õ9,µE/­='¨3¬3 ·8'Å;.Ì9/Ò5.Ò/*ä?;ûYTàI@ÎD7ÆI7¥5®D,ËF7ÉD5ÉA3É?2Í?3ÒB7ÚF<àG?ßB;à>9à;7à74â64ä65ç77é99é>7ç:4ä73è<:ñIHñMLØ=;¹(%¸-(¼5/Å@9ÌC=ÐA;Ö=8Ý>;ã?>á:2á:2â92ä84æ95è96ë99í9:ë7:ë6;ì7<ë8<ë8>è7=ç6<æ7<ì59è58å78ß:8Ù<7Ï<4Ä<0º:-°8(«:(¨;'¤;&¡:'Ÿ:&Ÿ:&ž9%š?,4"—>,“:*“1&Ì\X÷y|æT_ðTbèI[ØDRÃGO®SPšbS†lS{rSC[C?H3B7%O6"_K0prJ€£iˆÇ€yÃt{¾qu¢]oƒHy}J‡†Xy|O\d5:D)3=$4>&WN?XO@YPAZQB\SD]TE]TEcZKbYJbXNcXRg\Zmacsfmwjs|n{~p}s€s€~p}wjtobli\fcb]a`[a^W_\U_[R^ZOa[ObZMe\Kg\Ji\Ii]Gk\El]Fm]Dm]D_gOkiTqZH{M@•RI©WL®TI³WH¦N:¢G2¢?*ª;(¾:.Ò72à23å,1Þ7.Þ7.Þ7.Ü8.Ü8.Û7-Ø6+Ø6+×7+Õ7+Õ7+Õ7+Ô8+Ô8+Ô8+Ô8+¸=.·=.°8(§2!ª2!´;*½>/Â:,Æ6+Í6-Ô:2ÜB8àI>ÖG9Ç;,¹1!ßOGÙIAÔE=ÓE;ØH?ÜG@àC>á<:ã54ê67ï8:í9:ç77à72Ý:3Ü>5ÎKAÈE;½=0µ7)°5&³8)¹>.ÀA2Á;/Ê<2Õ>5ß=8ç;9î79ò67ô68æ7>æ7>æ7<å8:å99å97ã:5ã:3Þ5.ß6/ã81ä84å97ç98ç9:ç9:ë;>ç9;á99Ü<<ÖA=ÌC;ÀB6´@3¦;+¢=+>,™<*–;(•:'”9&“8%‡F2‡>/†/%”-(ÀIKèkoçlqÊWZ¶OP©TQŸVO˜YP•[P–]R™^Vœ`XMb!:O3JOf x’I˜²h¡½r »t™²pƒ›akN\lEWdHS\GHN@=C9;<,AB4=?2:=2,¯:)½9,Ì70Ø42Þ22Ý6-Þ7.Ü8.Ü8.Û7-Ú8-Ù7,×7+×7+Õ7+Õ7+Ô8+Ô8+Ô8+Ô8+Ò9+¸>/·=.®9(¥2 ¦3 ²:)»=.¿;,Æ:-È4*Ì3+Ó;0ÜE:ßPBÞRCÚQAÝE@Ø@;Ñ<6Ð;5Õ>7Ø=8Û96Ý33é69í68ï79í68é77å97â=9á?:ÆC9¿?2¸:,±6'¯5&²8)¸=-¿@1ÅA4ÍA4×@7ß=8å97ê67ï56ô68ç6<ç6<ç7:æ89æ87å97å95ã:3â92ã:3ã:3ä;6æ:8æ:8å99å99æ9;ä:=à<=Ú?=Ñ@;Å?6¸<2¬;-¥;+ <,œ=+—<)–;(’:&‘8&7%z;)€8)‰5*ž;5ÁQPÚceÔ]a¹MM­NL¤SOYP˜\R—^S—^U˜_V™^VSg*Sg(^r3zO—°l¥¾z™²nˆ¡`j‚Fau@Sf9IY5FP7?H59?358/;<,AB4=?2:=2;A5:C2@M3Rc?]uCgƒHqLp”Jm“Hk“Jk“Lh‘Km‘Tn’To“Sm”Qk“Lj”Hl—Hm˜HpJnžJp Ls£Ou¦Tx©Xx©Xx©Zm–\b‹QY‚H]TE]TE]TE]TE]TE]TE]TE]TE[RC\SD]TE^UF_VG`WHaXIaXIe]He]Jd[Jd[Le[Qf[Uh]Yh\\i]]j^`k_ak__i]]f[YbWU`USYVMWTKTQHRNCQMBSOCWQCXRB^WG^WEaYFc[Fg\Hi^Hk`Jk`J^cOmhUy_PˆXN¤[T³VQ´HE¸E>¹@7¸>3·<-·9*¼8+Ã9.Ê:/Ï;1Û7-Û7-Û7-Ü8.Ú8-Ù7,Ø8,×7+Õ7+Õ7+Õ7+Ô8+Ô8+Ô8+Ò9+Ò9+º@1¶>.®9(£2 ¢3ª:&µ=,»=.Ä?0Å7+Æ2(Ê3(Ð<0ØF9ÛM?ÝQBÜ87Ø43Ô20Ô52Ù:7à>;å=<é;<ï8<ï5:ì27ê24é56å97á<8à=8¹;-·9+±6'®4%­5%°8(µ<+»=.ÈD7ÏC6ÖB8Ü=7â96è64í55ò67ê5:é6:é69ç79ç77æ95å:3å:3ã:3ä;4ã<6ã<6ã;8â:9á99à88Ý9:Þ;<Û@>ÕA=É>7º:1­7+¥7(¡;,œ=+˜=*”<(’;(9&8%Ž7$u8%y6%ˆ9,¢E=ºROÂVT¹OO¬HH¤LHœSL˜ZO—^S–bU—aW˜_V˜]UgxB{ŒU“¦n¥¸€«À‡ž³zz‘YYp:?R$AS)AQ-?L0:C.6<.690581:;+@A3=?29<1;A59B1@M3Qb>_wEi…Js’Nr–Lo•Jm•Lm•Nk”Np”Vq•Uo–Sn–Pl”Kk•Il—HmšIpJpJp Lu¤Sx©Xyª[u¦Wq¡U_ˆNVEOx>aXIaXIaXIaXIaXIaXIaXIaXI_VG`WH`WHaXIbYJcZKd[Ld[Le]Ff^Gf^Ig_Lg^Of\Pf\Rf\Sh]Wh]Wh^Uh^Ug]Se[QdZNdZN]YNZVKVRFRNBPL@PM>RO@UO?WQAYTA[VC^WDaZGd]Jf`JgaKadSleUt]O‹[Q«b\»YXºDD¾9:Æ;8É:6Ç80Â8-½8)¼:*½@.¾C1Ù7*Ù7*Ú8+Ú8+Ú8+Ø8*Ø8*Õ8)Õ8)Õ8)Ô8)Ô8)Ô8)Ò9)Ò9)Ò9)»A2¶>.¬9'¡4 2¢8"¬=)µ@.¼>/Á9+Ä6*Ç4*Ë7+Í;.Î0å26á14Ý02Ý34à88å;<ë=?î;?ï6<í38ì/5é05ç47ã77Û64Õ30±7(°6'®6&¬7&¬7&®9'²:)µ:*ÃA3ËA4ÔA7Ü?8â:7ç85í76ð67í6:í6:í68ë76ê86è94ç:4æ;4â92á:2ß:4à;7Þ:8Ý98Û97Û89Ö<:Õ@<ÓB?ÊA;»;2¯6+¥5'ž7(œ;*—<)“<)‘<(:&8$Œ7#Œ6%z@,v5#6'™E;¬OH¬MI©LG¨PLPH–VL“ZO“_R“bT•aV—aW™`W~‹]™©z­½Ž¦·Š¡ts†YN`8/A->3B%:F.=F3;A3:=2;<4<=79:*?@2<>19<1:@49B1?L2Pa=`xFj†Kt“Os—Mq—Lo—No—Pm–Pp—Tq˜Up˜Ro—Pm•Ll–Jn™JoœKqžMrŸNt£Sy¨X|«]w§[mSd”J[„LS|DNw?cZKcZKcZKcZKcZKcZKcZKcZKcZKcZKd[Ld[Le\Mf]Nf]Nf]Nf_Eg`Fh`IiaLiaNi`Oh_Ng^OjaRi`Qi`Qh_Nh`Mh`Mh`KiaLb_P^[LYVGTQBPM>NKTQ>VS@YVC\YF^[H^]I`aSf^QmWJ†[R­hcÁb`ÄLMÌ@CÔ:<×79Ö74Î70Á9+·>)²D+°H-×7)×7)Ø8*Ù9+Ù9+Ö9*Ö9*Õ8)Ô8)Ô8)Ô8)Ò9)Ò9)Ò9)Ò9)Ò9)¼A2¶>.«:( 7"™5š7 ¢>&¯B-±<*º;*Â:,È8-Ë8.Î:.Ð<0Ò>2ò5<î3:é27ã36â46â46â46ä15ì5:ì39ê38ê5:æ8:Ü66Ñ2/Ç,(®9(­:(­:(«:(«:(«:(¬9&¯7&¸:+Á<-Í?3Ø?7à=8æ:6ê86ì87ï56î66î66í74ë84ê93ç:3æ;3á:2ß;2Þ=5Ü=9Û=:Ù><Ø=;×==ÌA<ËB<ÆA:»<3­7-£5(ž7(š;)–;)“<)=(Œ;(Š9&‰8%ˆ7$‡6#}C/s4"y4$“G:¤RG¡NFžNE¡WN˜UL’XL[NŒ\NŽ^R”`U—aW›bYƒŽd˜¤|©ƒ€Žj]kJDS42@&$2-:&0;*5=.9?36:;3::29:*>?1;=08;09?38A0>K1Pa=ayGk‡Lu”Pt˜Nr˜Mq™Pq™Ro˜RršSršSršQp˜Om—Km˜Ip›LržOt Qv¢Sx§Y{©^z¨_qŸVd’JY‡?]†NVGQzBe\Me\Me\Me\Me\Me\Me\Me\Me\Mf]Nf]Nf]Ng^Og^Oh_Ph_Pg`Fh`IiaJjbMjbMjbOjbOjbOjbOiaNh`Kh`Ih`IhaGibHjcGe`Mb]J^XHXRBSM=MJ9KH7IH6KJ8LK9LM;NO=PQ?QTASVESVEYYM]WKcQEzXN¡ha¸eaÇUUÛORÞ=Cã8>à67Õ62È:.¹@+­E*¦I*Ô7(Ô7(Õ8)Ö9*Ö9*Õ9*Õ9*Ô8)Ô8)Ò9)Ò9)Ò9)Ò9)Ò9)Ò9)Ñ:)¼@4µ=/«<+ :$—7’6š<#¦B*°C.¹@/¿;,Ã7*Å2(Ë4+Ó:2Ù@8ó1<ð2<î5=ë8>ç:>å;>ä:=ã9<á48ä5:å8<ä;>Þ;<Ò86Å1-¼-'«<+«=,«>*©>*¨=)©<(©:'«8%¯6%¹7)Å;.Ñ=3Ù<5à;7ä;8è;7ð75ï75ï75î84ì94é;4è;4å=4â>5à?7ÞA:ÚA;ÙA>ÕA?Ñ??Ñ??¾B:»@8µ<3ª8-¡5(›5'˜8(•<*‘;*<)Š<(‡:&†9'„7%ƒ6$‚5#y<)r3!}:*—OA£YLœRG•OE–VJ”ZN[MŒ[M‹[OŽ\Q”^T™`Yœa[s}Xyƒ`r|ZU`B9F,/;'0;+1;03=44;35<4:?8?B9?A6<<277+89)>?1:27@/=J0O`HO?HO?PPDVRGYOChREYM˜UL³RLØXWàGJçï:Aì?CæBCáACÞ@AÚ>?Ï12Ñ56Ô::Ò<;Ê;7¾73µ4.¯3+¥>+¥>+¥>+¦?,¥>+¤>(¥<'¨;'ª7$²7'¼8+Å8.Ì8.Ö92Þ<7ä?;î85î85î84ì94ë:4è;4å=4â>4âA7ÝC9ÚC<ÕB;ÐA=Ê?<Ç=;Ã<9®>3©:/¢8+œ6(˜7'”8)‘:)Œ;(‹=)ˆ=*…<)ƒ:'‚9&€7&6%~5$v4$x5%…B2˜UEœXK“QCPD•ZL’ZM[NŽ]OŽ\Q’\R•\U˜[V™\W`hCX_=JS4>G,6?*2=-4>35?74=88>:=B/;9*78(=>0:26?.=J0N_;`xFk‡Lu”Pu™Os™NršQršSp™SqœMrNqœMp›LošKrNu¡Ry¥X«`~©az¥]qœUf‘L_‰G[ˆE\‰Hb‰RY€ISzCh_Ph_Ph_Ph_Ph_Ph_Ph_Ph_Pg^Oh_Ph_Ph_Ph_Ph_Pi`Qi`QmcWlbVjaRi`Qh_Pg^Og^Mh_NiaNiaLiaLiaJh`IhaGhaGhaGh`Kg_Je_Ib[H\WCUR?PM:ML:EF4DG6DH7BI9BI9BJ;BJ;BJ;JJ@QQERPAUNÄYSÛQOãCEå8:ß55×:3Ê>/¸>)¬<$Ï8'Ï8'Ð9(Ò;*Ò;*Ò;*Ò;*Ò;*Ñ:)Ñ:)Ñ:)Ñ:)Ñ:)Ñ:)Ñ:)Ñ:)½=2¶:.­<,¥>+˜9#Œ59ž@' :$¯<)¾?0È;1Ì8.Ñ7/Ù<5àA;ð;Bï>FëBGãCEÖ@?Ê;7À50»1.·0,¼51¾:5»<6³:2©9.£9,¡9,Ÿ>+Ÿ>+ ?,¡@-¡@-¡A+£>*¤=*©<(­:(²7(¹5)Á4*Ë80Ö?8ÝD>é:5é:5è;4è;4ç<4ä=4á?4Þ@5ÝC9ØD:ÒC;ÊA9Ä?:¼;6¸85´73ž9-™7*•5'’6'‘:)<*‰:)„9&†=*„=+=*€<)~:'|7'{6&{6&y1#€8*ŒG8–RE’PB‹K?ŽSE™_SXKZN’\R–]T—\V˜[V˜YT—XSV^7EM(6@8A&>G27@E>GJ?GI;BC1?>);;#78(=>09;.69.8>26?.E5>F7?G8=H8AE4HK6YS;_F0€K9Àj]Ýf`åSSçDEè@@ã?=Ö=5É=0Â>/É3$Ë5&Ì6'Í7(Í7(Î8)Ñ;,Ó=.Ò<-Ò<-Ò<-Ò<-Ñ;,Ñ;,Ñ;,Ñ;,¸3,·7.±;-¦;)˜8"‘7’8š:"«B-±<+¹7)Á4*Í6/×<7âC?êHCëBGéDHÝCCÉ:6»61´80®8.§5+ª:/¨9.¤8. 8-›9,–:+’<+>-˜=*˜=*™>+š?,›@-œA.žB-¡@-¡<*¥:(«7(°6)¶6+¾8-Å;1Ê=4ß:4á<6â?6ã@7âA7ßA6Ú@4×@5ÚG=ÒE;ÇA6»;2±6.ª3-¤1,¢1+”;-’:,:+:*‰:)ˆ;)…<+„=+~:'|9(|9({:({:(z9'x6&w4$z, A4˜NC“MAŽL>RE‘VHŽRG˜\R˜\R‘UMTL™ZU—XS–WR `^R[0IQ(AK&BK,>H/7@-2=-4>34;3HPEX^RW[LLO?1;=0:=29?34=,;H.Pa=bzHlˆMu”Ps—Mq—Lp˜OršSqšTpJqžKrŸLrŸNsŸPv¢U{§\ªb‚­fx£^i”O_‰G]‡G`ŠJfŽOhRd‰U[€LTyEi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qj^^j_]j_]j_[j_Yj`Wj`Vj`Vj`TjaRjaRjaRjaRjaRjaRjaRj_Kh`Kg_Jg_Jd]J^YEUR?ONE5?E7>F7>F7=E6BF8>E5=F1DN5HK0PB'yS<¹ubÉdXà_YíUTêFGä>>â@=Û>9Ñ82Ì:+Î<-Ï=.Ð<.Ï;-Î:,Í9+Í9+Î:,Î:,Î:,Ð:,Ð:,Ð:,Ð:,Ð:,È?9ÆA:½A7®=/6#•2•2™3¦5#²7(Á;0ÑA8ÞE?æIDéJFìJGÞBCÛEDÎC@¼;5®9/¨>1¢A1œ?.œ@1™@0–>0’?/Œ?-ˆ?.„A.ƒB.‘;*‘;*’<+“=,”?+”?+–?,™>+Ÿ@.¡=-¤:,§9*¬8+±8-¶:0¹:1Ð90Ò;2Õ>5ÕA7×C7ÖD7ÔD9ÑE8ÊB6ÃA4¹=1°:0¨8-¢5.5,œ5.Ž=,Œ=,Š;,ˆ;+†:*„;*<,€=,~;*|;)y:)y:)x9(w8'u6't5&„1)‘C9˜NC‘K?ŒJ>PD’TIRG“SJšWQ˜UO™UR\X”WTŽSO—\XT]0Zc8_j@[eBIT66C)4@*0:-;H.Pa=c{IlˆMu”Pt˜Nq—Lq™PršSqšTq¡Kp LpJqžMt Qx¤W|§_ªc{¦aošUcŒJ]…Fa‰JeNeNc‹Ld‰U[€LTyEi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qj^`j^`j^^j_]j_[j_Yj`Wj`Vj`Vj`Tj`Tj`Tj`Tj`Vj`Vj`VlaMk`LiaLiaNf_La\I[VCTQ@ML:HI9DG6AE6AE6?E7>D6=C5=F57@-?H3EM5AA%QA']E³u`³WHÙbZðebîRSéEFìFHèBDÝ79È9+É:,É:,É:,É:,Ê8+È6)È6)Ê8+Ë7+Ë7+Ë7+Ë7+Ì8,Ì8,Î7,Â3/¾5/¸5-¬3( 0"›0Ÿ1 ¥4$»A2ÇC7ÖG?ãKFçLGéJFåFBâC?ÕCCÏDAÁ@:°;1£=/žC1™F4•G3’E3E2ŒC2‰B0ƒB0B/{B.xD.Š8*‹9+‰:)Š;*‹<+<+Ž=,<*–?.–=-›;+9* 8+¥9-©:/«;/¼7.¾90Á;0Ä>3Å?3Æ@4Ä@3ÁA4¸:,²:,ª9+£7+7+™7,–8.–91‰=-ˆ<,…<+„;,‚:+€;+<+<,};+z;*z;,w9*v8)u7(t6's5&Œ91”F<—MBŽJ?ˆHMKB3;I27C-EJ3IG0K<%mN9—dO§`NŸA5ÆSLçc_ð^^îRUíJMêDHç>CÉ;/Ç9-Å7+Å7+Ç9-Ê:/Ë;0Ë;0Ñ>4Ñ>4Ñ>4Ò>4Ó?5Ó?5Ó?5Ó?5Ó?=ÑB>ÍD>ÆF=ÁG<ÂI>ÆN@ÎPDÙSJÞOGäLGäIEåFCâC?àA=ß@<ÔFDÊC?º?7«<1ž>.—D2“H3‘J6‹G4ŠF3‡D3„C1B0zA.wC.uB/†8+…9+…9+†:,†:,‡;-‡;+ˆ;+‰:+‹:)Ž8)8*•9,™<-=/ž>0«9/­8.®9/°:.°:.²:,¯9+®8*¨7)¥7*ž7(›6*•7+’8-9/;0†=.…<-ƒ;,9*:+~9*}:*};-|:,z;,y;,w9,s8*q6(q7)q7)B8”G=‘K?ŠH<‡I<‹OD“UJ—TL—PLSP˜QO–RO—\X_Xh^žzn™k…’fu‚VYh=CR)?O(P`B'=A&;>#78(:;-79,9<1;A57@/MKH/JH1Q?+e>-”ZL¬`S›>6œ4+µ@9ØXUóigödeëRUèINìKQ×J@ÓF<Í@6Ë>4Í@6ÒD:ÕG=×G>ÚJAÚJAÝJBÝJBÞKCßJCàKDàKDëRTéSTãTPÜSMØSLØSLÛTNàUNàLHâHFäEBäB@äB@äB@ãEBãEBØJHËD@¹>7ª>2žA2–C1F3I6‰F3‡D3†C3ƒ@0@1}?0y@/x@1ƒ9.ƒ9.‚:.‚:.ƒ;/ƒ;-ƒ;-ƒ;-9*‚9*…9+‡9,‰:+;-<.=/›;/œ:/ž9- :.¡9,¢8*¢8*¢8*Ÿ8)œ8)˜8(”8)9*Œ:,ˆ:-‡;-ƒ;-‚:,9+~9*}8)}7+|8+{9+z8*y9-x:-t9+q5*o5)q7+r:-G;ŽH<‰I=„I;…K=ŒRF“WMšWO˜QMžTQ™RP•VQ’`YˆbW‚h[ŠwhivKZi>JY.AR&IZ0Wi?dvLj|TXjDL\8?M,:D)C-=@-:=*89):;-68+8;0H-NC-b=-„D:¯VP¶MJ¡++´:9º=;ÑTPòpnýwvñehêY^ò]cáVOÚOHÒG@ÎC<ÑD=ÔG@ÖGAÖGAÙHCÚIDÚIDÝIEÞJFÞJFàKGàKGãGJáGIÝGHÙGG×HD×HDØGDÝEBàBAåABé@CêBBèBBäB@ßA>ÜA=ÚJIÌB@»<6®>3¢@3—A2B0D3‰A2ˆ@2ˆ>1…=1‚<2€<1=1}=1ƒ:3;3;1;1€<1€<1=/=/=/€.™9)•9*“:*Ž;+Š;,‡;+ƒ;,€;+‚:,9+7)~6*{5){5)z6)z6+x6*x8,w9.s7,o5)o5)r:-u=0ŽL>‰K>„J<‚M=…QC‹VH’XM—WN”MIœRQšTR•[We\y_PcXFb]IBP,?M)?O(K\2_qGk~QcyKVk@M_7@R,6E&7D*=F1=D4:=27:19:*:;-68+8;0G*SA+{E9¦NL¸EH»5<¾19Ë@EÄ?@ÊJIÞb`îrpïopçbeáZ^ÛRJÕLDÏD=ÍB;ÏD=ÒE>ÐC<Î?9ÒC=ÓB=ÔC>×C?×C?ØD@ÙEAÚEAà?Dß@DÞDFßFHßIHàJIãIIæFHçACëADîAEîACéAAâ@>Ù>:Ö=8ÛEGË=<»73°;4¦@4˜?1>0ŽA1‰=/Š<0‰;1‰92‡81†93…:4„;4:4:4€<3€<3<3}=3}=3|<0{=0{=0{=.{<-z;,y:+z8*z8*€:0‚:.„:-ˆ:.Œ:.‘;.”<.–=-’9)‘:):*Š;*‡;+ƒ;,<+}<*€8,€8,~6*}5)|4(z4(z4*y5*u3'v6,v8-r6+n4(n5*s:/v@4‹PB†N?N=R@…VF‰XIŽUJ‘RI“NI™RP”SO‘\VŠfZl\LML7BL3@O.KZ9WgC`rJezOdzLVl=G]/AV+7I#0A!5C*=F5QJ:MG7IC3GA13M*>G*[B.PGºVVº7?»'3ÜBNÐ:CÄ9>»;:ÂHGÓ][ßgf×[]ÇILÓJDÏF@ÌC=ÎC>ÒGBÒGBÐB>Ë=9ÒC?ÓB?ÔC@ÕDAØDBÙECÙECÚFDá>Cà?DÞBEßEGáGGàFFàBCâ=AëADí>Cì;Aê<>æ>>ãA?ßD@ßFAÙ@CÉ78¹30±:4§?4š>1=/Ž?2Š;.‹9.‹80‹61Š71Š73‰84‰:5:3:3:3~;3|<3|<2{=2{=2u9.v;-w<.w<.x=-x=-y;,y;,{;1};/~8,7*„6)‡5'‰6(‹5&7(‹8(‹:)ˆ;)…<+<,~=+{<*€8,7+~6*|4(|4({2)y3)y5*t1(u5+v8-r6+n4)n5*t;0xB6ŒTE„Q@P>‚UB„YHˆYI‰SGNG˜SN˜RPPKˆVO‚bUeZHFK4;K0IX;[jKgxVewQYnCSi;Me5I`28M"-B*;2@):E7;B;8<;7;<<=-<=/79,9<1=C77@/6C)DU1Rj8_{@mŒHp”Jq—LršQtœUr›Uq¢Qt¥Vu¥Ys£Ym›Sd‘N\‰HZ„DdŒNa‰J`‡HcŠIfJiŽIeŠDa‡>`‚PWyGPr@i`Qi`Qi`QjaRjaRkbSkbSkbSjaRjaRjaRjaRjaRjaRjaRjaRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcTo\Nq_QtdUrdWnbTj`Th`ShbTgaSebQa^K[VBVQ;TN6NH.GA'RD)N=#cI2iV²zm·ng³[W¸PQ¶BEÁ@EÉ@GÑBFÖDGÚEIÜGIÝGIÔBEÔBE×BDÙEEØDBÒC;ÎD:ÌH;ÄF7ÃH9ÆH:ÊG?ÐEB×BDÜ?FÞ=EâBDâBDâBDâDEâDEãEDãEDãEDâDAâC@áB?â@>ã?=ã?=ã?=å@>ÎE?Ä?8¶:2©80Ÿ:0•>4Œ@3ƒ?2A4|@5}?4<3ƒ:3‡83Š73Œ72…<-…<-…<-„;,ƒ;-‚:,‚:,‚:,9-9-9-~:/~:/~:/~:/~:/~80~80}90}90}90}90|90|90|90|90z:0y9/y9/x8.w9.w9.w8/w8/v7.t8.s7-r6,q5+p6+l2'q7,m4)l3(o6+m4)q8-H=ULƒTL†QK‹PJNJ•NL˜NM—PL”SM‹UK†\NdOkaFTW8JX5N_;gT`zMWpFTkARg@O`0CA4B@4@<12:/2:/4:.5;-9=.A,>D*T^4ÉE9ÈF9ÊG=ÍG>ÒGDØCEÜAEß?GáCDáCDáCDâDEâDEáFDáFDáFDàEAáC@àB?ßA>àA=àA=â@=ãA>ÑFAÉB<¼=6¬:0 90“;/‰=0=0A4|@5}?4<3ƒ:3†91Š71Œ72…<-…<-„;,„;,ƒ;-‚:,‚:,‚:,9-9-9-~:/~:/~:/~:/~:/}90}90}90}90}90}90|90|90|90z:0z:0y9/y9/x:/w9.w9.w8/w8/t8.s7-r6,r6,p6+p6+k1&q7,m4)l3(o6+l3(p7,~H<‚SK„TJˆQJ‹PJ‘PL•OM–PN–RO‹OG…SH€[K{ePsiPhkLdrOgxT\uKXoEPf?Ka:K_:K\:GV7CP42><03;03;05;/6<09=/A,>D*Q[9^mDmPpŒRr’Sq™RsSsŸRxža|¢exžak‘T`†I]ƒF]ƒF\‚E`†Ia‡Jc‰Le‹NdŠMbˆK`†I^„G]MRtBIk9i`Qi`Qi`QjaRjaRkbSkbSkbSjaRjaRjaRjaRjaRjaRjaRjaRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcTtbTo_Pm]Pm_ToeYog\keYhbVfbVpl`{xi~{jzgzuapiVf`JPVÔG@ÖGCÚFFÛEFÝDGáCDßCDßCDßCDàDEßECßECßECÞDBÞE@ÝD?ÜC>ÜC=ÜC=ÝB=ÝB=ÕF@ÎE=ÃC:³>5¢:/’8-ˆ9,<-€A2~@3}?2=1ƒ:1†91ˆ81‹80…<-„;,„;,„;,‚:,‚:,‚:,€:.9-9-9-~:/~:/~:/~:/~:/}90}90}90}90|90{8/{8/{8/{;1{;1z:0y;0x:/x:/x:/x:/t8.t8.s7-s7-r6,q5+o5*o5*k1&o6+m4)k2'n5*i3'm7+}G;†QI‡PIŠQJŽQL‘RM“RN•TP’UPVO‡[P^OtbNoiQnrWjwYfwWPf@K_:EY6BV3EV6GV7FU8ER8?I1*7;*:<.<>0<=/:;-5<45<46<26<09=/<>0=@-=C)MV7Zi@h|KlˆNpOq™RuŸSt Sz cw`n”Wc‰L\‚E\‚E\‚EZ€C_…Ha‡JbˆKdŠMc‰La‡J_…H]ƒF[}KPr@Gi7i`Qi`Qi`QjaRjaRkbSkbSkbSjaRjaRjaRjaRjaRjaRjaRjaRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcTtdWqaTm_Rk_SkaWlcZle[jf]jf]wuiˆ„y‘•’Œ|‰‚r€ygZfNLV>AI2CF1ED0D?,I=-TD5M:+O8*R6*T7)X8+];/a?3eA5‹KAœSL­UQ¶NK½EDÇABÓCCÛEF×?>Ø@=×B>ØD@ÙEAÚFDÛEDÛEDßCDßCDÞDDÞDDÞDDÝEDÝEBÜGCÛFBÚE?ØE>ØE>×D=×D=ØE=ØE=ÖC<ÔE?ÊE>»@8§;/–8,‹9+…;.‚@2@1~?0=/;/„:/‡9/‰90„;,„;,ƒ;-‚:,‚:,‚:,9+9-9-9-~:/~:/~:/~:/~:/~:/}90|90|90{8/{8/{8/y9/x8.{;1y;0y;0y;0x:/x:/v:/v:/s7-s7-s7-r6,p6+o5*o5*n4)j1&o6+l3(h2&k5)h2&l6*|F:ŠOGŒPHQIRMSN’UPWPŽYQ‰]R…aUy_PiZGd_IciOZgKN]@EU8AQ4=M0G2:A/7>,9=,9=.8<-7;,6=66=66;46<29<1;=/dxGj†LpOs›Tw¡Uw£T{¡dr˜[e‹N\‚EZ€C\‚E\‚EZ€C_…H`†Ia‡JbˆKa‡J`†I^„G]ƒFY{INp>Ef7i`Qi`Qi`QjaRjaRkbSkbSkbSjaRjaRjaRjaRjaRjaRjaRjaRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcTseXugZsg[mcYjaXle]snhzwp~w† –©¥œ«§œª£™£‘œ”‰v~i`hSLSADK9AJ7>G4>G4BI7GNBÛ?@ÛAAÛC@ÚEAÚEAÚEAÚEAÞDFÞDFÞDFÞDDÝEDÝEDÛEDÙEAÚFB×FAÕF>ÔE=ÓF=ÓF=ÓF=ÔG>×@9ÕB;ÏD=ÁB9®>3œ:-‘;.‰=/„?0?/~?0=/<-„:-†:-ˆ:.ƒ;-ƒ;-‚:,‚:,‚:,9+9-9-9-~:/~:/~:/~:/}:1}:1}:1|90|90|90{8/y9/x8.x8.v8-y;0y;0x:/v:/v:/u9.u9.u9.s7/r6.q6.p5-o4,n3+m4+m4+j1(o6-j4*h2(j4*g1'k5+zF;MGNH‘PJ’SLUOŽWPŠZP…ZQ{YMv\OkZJ]UBYXDY^HOYA>L3;G18D.5A+5A+8D.=I3AM7EN;BK8?H5.5<,4;+5;75<56;56;48;2:-;@)GP1Ra:buGi…Kq‘PuVy£Wx¤Uzcn‘W`ƒIZ}C[~D^G^G]€F`ƒIa„Jb…Kb…Ka„J`ƒI_‚H^GW{KLp@Bf6haQhaQhaQibRibRjcSjcSjcSibRibRibRibRibRibRibRibRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcTmaUndXpf\lcZkd\rmg„|‘‹¥¤ ³²®ÄÁ¼ÉÆÁÉľÅÀºÀ¹±¹²ª¤œˆ‚tfcTPQAEI8=F38E18G45F35F44E36D58D6;E:?G<@H=<6(L0–=/Œ=.†>/‚?/€>.=-<-ƒ;,„;,‡;-‚:,‚:,‚:,‚:,9+9-9-~8,~:/~:/~:/~:/}:1}:1}:1}:1z:1z:1y90y90x8/v7.v7.v7.u9/u9/u9/s9.s9.s9.r8-r8-q6.q6.p5-o4,n3+m4+l3*l3*h2(l6,i3)f2'h4)e1&i5*xD9’KE’MF“PJTLVO‡XNYO|\Os\Nk[L_XFUTBPS@JQ?@I64@,3<+2;*09(09(2;*5>-9B1-;@*CL/O^7_rDi„Mr’SwŸXy£Wv¢Us–\f‰OZ}CX{A\E]€F]€F^G`ƒI`ƒI`ƒI`ƒI`ƒI_‚H^G]€FVzLJn@Ae7haQhaQhaQibRibRjcSjcSjcSibRibRibRibRibRibRibRibRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcTiaVjbWkdZmf^upjˆ…€Ÿžš°°®ÂÂÀÓÒÐâáßéåäçãàãÞÚÞÖÓ×ÏÌÒº°º¤™˜†zym__YIKL:>F19E1>2J91`94ˆHH²\_È_dÍVZÐOSÕMOÚLKÜJJàHEáFBãDAåA?ÞDFÞDFÞDFÝCEÝCEÜBBÛCBÛCBÚDCØD@ÔE?ÓF?ÐF<ÏF<ÐG=ÎH=Ý>8Ú?:ÒB9ÉC:¼C8«A4™<-Œ9)‡>-ƒ>.>-€=,€=,<,ƒ;,…<-‚:,‚:,‚:,9+9-9-~8,}9.~:/~:/~:/}:1}:1}:1}:1}:1y:1y:1x90x90w8/t8.s7-s7-s9.s9.r8-r8-q8-p7,p7,p7,p5-o6-n5,n5,m4+l3*i3)i3)g1'k7,h4)e1&h4)d0%f4)uC8•JE“LH“PJTL‰WNYOx[Mp]Nj^N]WGPQAKN=CJ:9B12:+08)36-17-06,/5+/5)17+2:-4<-9D4;F6=H7*0640641622716929;0:<.:?)?H+KY5]pChƒLs“TwŸYw¡WržQiŒT^IUx@WzB[~F[~F[~F]€H_‚J_‚J_‚J_‚J^I^I]€H]€HUvKJk@@a6haQhaQhaQibRibRjcSjcSjcSibRibRibRibRibRibRibRibRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcToh^ng_lh_tqj…„¡ ž¼¼ºÏÏÏÎÏÑààâòòòúøùû÷öøòòñìéêåâïÍÃàÀµÅ©¥€sbaZGML7CH2AI4AH6BF7BD7C@9D<9C98C772?5;@9@93H/+c76QR³giÇmmÂ[\ÉYWÑUS×QNÝKKåGFèBBê@AÞCGÞDFÞDFÞBEÞBEÝADÜBBÜBBÜDCÙCB×C?ÔC>ÒE>ÐE>ÏF<ÐG=â@;Ý@9Õ@9ÌC9ÀD:°B5›;-‹5&Š=-…=.>-€=,€=,<,ƒ<*„=+‚:,‚:,€:.9-9-~8,}9.}9.~:/~:/}:1}:1}:1}:1}:1{;2w;1w;1v:0u9/t8.s9.r8-q7,r8-q8-p7,p7,n8,m7+m7+m7+o6-o6-n5,m4+j4*j4*i3)h4)f2'k7,h4)c1&e3(b0%e3(uC8”JG“NIQJ‹TM„XOzZMq[Mh\LXUDHK:=D4=E69A208+/7*5=056157257247005.06,08-19,6A3:E5=J9>K9;J77F12A,0?*.42.420511605818:/:<.:?+WzB[~FY|DY|D\G_‚J_‚J^I^I^I]€H]€H]€HSsJHh?>^5icSicSicSicSicSicSicSicSicSicSicSicSicSicSicSicSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUmdUmdUmdUmdUmdUmdUfc\gd]vsn“’Ž¯¯­ÄÆÅÚÛÝìíïóôöö÷ùüüþÿÿÿÿþÿÿûúüööùôñÿÞÏöÖÇãÈ·É´Ÿ­ž‡ŠƒicbFGG-EG/DF0GD3IC5H;3F42G34M797@;;@:@;8G85cGF‘kjŔ譩ҋ‡ÇtnÀ]XÆSNÖNNâIKëEIðCGÜFHáHKÜCFÕ:>Ø>@âFIàDGÖ:;Ú@@Ú@@ÙA@ÖB>ÔC>ÑB<ÏB;ÏB;ãA<Ý@9Ô?8ËA7¾B8°@4;.8*‹>.†>/‚?.>-€=,<+=*=*9-9-9-~8,~8,|8-|8-|8-}9.|90|90|90z:1z:1z:1z:1x=5w<4v;3u:2t91r7/p7.p7.o6-m7-m7-m7-m7-l8-l8-l8-i2+m6/p92o81k4-g2*g2*h3+e0(i7.d2)^,#`0&_/%b2(p@6’LJOKŠQJ‚QJ}YMv_QfYIRO>CF5=F58C35@02=/3;04:04:077577566446135016/05..6+.9+2=/6C29H5:I68G42D./A+,20,2.-2..3-36/780:&DR1YkCh‚Ru”[wž_r›Wj•N\}HXyDTu@Tu@WxCZ{F[|GZ{F^JbƒNbƒN^J\}H_€K`L^JTrNFd@:X4icSicSicSicSicSicSicSicSicSicSicSicSicSicSicSicSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUmdUmdUmdUmdUmdUmdUed_onj…†¤¤¢ÁÃÂÖÚÛêîï÷ûþ÷ûþøüÿüýÿþþþÿþÿÿýüÿüùÿûøÿïÚüêÒîÞÅØͱÀ»¤£„‚ƒcgkJMP1II/EC,HA/J>2L93M85Q99;;9BA?MHE\RQyjg¢‹Ì³®åÇ¿ÿÙÏ괪̃|Àc\ÌVTÛPSãFMâ=DÕEEÕEEÙGHÞIKÛEGÖ<>Ö<>Ü@CÚ>?Ù??Ú@@ÙA@ÖB>ÓB=ÒA<ÐA;ß@:Û@;Ô?8ÌA:¿C9±A6 ;/‘9+Œ=.‡>/ƒ>.>-€=,<+€=,<,9-9-9-~8,}9.|8-|8-|8-|90|90|90z:1z:1{;2{;2{;2v=4u<3t;2s:1r90p7.m7-m7-m7-l8-l8-l8-l8-j8-j8-j8-l5.n70n91n91l7/i4,g2*e3*c1(e3*_/%^.$b2(^.$`0&n?5„IEˆQLˆWRWOrVKdRDQJ:>?/:A16A14A02>02<14<15;17:388677577557446116005./7,.8-1<.4A07E49H58G44E22D.062.40.3--2,14-45-8:-9=,7?'DQ3YkEh‚Sv”`wbp˜YfNZzHWwETtBTtBVvDYyGYyGYyG[{I_M_M\|J[{I^~L^~L\|JTmOF_A9R4icSicSicSicSicSicSicSicSicSicSicSicSicSicSicSicSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUmdUmdUmdUneVneVneVddby{x—™˜²¶µÍÑÒäéìôùüúÿÿûÿÿûÿÿûÿÿýÿþþþüÿÿûÿÿúÿÿúÿüßúùÛïðÐáåÄÒØ´¼Äž©‡’j`hCRW7DG,EC.KD4MC9N?8L=8C:;SJKi`a€xv›“¼µ¯×ÐÈçÝÓúêÝÿôéÿåÛ画Äec¸ACËBIáNVÚVRÒLIËDAÎBAÔFE×EFÙCDÛBD×=?Ø>>Ù??Ø@?×A@ÕA=ÓB=ÒA<Ü?:Ù@:ÔA:ÍD<ÀD<²B7¡<2“9.Œ=0‡=0ƒ>/>.€=-<+€=,€=,9-9-9-}9.}9.|8-|8-{8/}:1}:1{;2{;2{;2{;2{;2{;2t;2s:1p:0o9/n8.m7-k7,k7,l8-l8-j8-j8-j8-j8-i9-i9-n91m80m80m80m80i7.f4+c1(c3)a1']-#_0&c4*\-#_0&sD:OK‚UPXQqSK^J?OC7?<-37(2:+/<+0<.2=/4<15;17:37:388688668557257227016/08-.8-0;-2?.6C27E48G48G48G46=53:2/4-,1*.1(13(57*6:)6>'DQ5[lHk„Zy–fwœfl”X^‡KWwEUuCRr@Rr@TtBVvDWwEWwEXxF[{I]}K[{I[{I]}K\|JXxFPfOAW@3I2icSicSicSicSicSicSicSicSicSicSicSicSicSicSicSicSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUmdUneVneVneVneVofWgklƒ‡ˆ£§¨¹¾ÁÐÕØåíðóûþõýÿùÿÿûÿÿüÿÿüþûýþùþýøÿþ÷ÿÿöóÿâñÿÞëùÖäòÎÛêÃÌÛ²³Â™ ¬„}‰cdnKLS4EI0HJ5KI:GE9D@7QEEk__‹€¤š™µ°­ÊÇÂÜÜÔççÝ÷óèÿýñÿøíÿÝÕú·±èŽŽÌbd±>CÃPIÉTMÉOJÃF@ÊFBÔMJØJIÑ??Ò>>Ô>?Õ?>Ö@?ÕA?ÓB?ÓB?ÒC?×>8×?:ÒC=ÌE?ÀE>±B9¢=5•;2Œ<1‡=0ƒ=1=0=-~<,€=-€=-~:/~:/~:/}9.}9.|8-{8/{8/~;2|<3|<3{;2{;2z;4z;4z;4p:0o9/o9/m9.l8-k7,j6+h6+i7,i7,h8,h8,h8,h8,h8,h8,o:4j81h6/i70j81j81e4-a0)e4-b1*].&a2*b3+Y*"_3*zNE~]XvWRiNGWC:J<3@:.:;-8<.08)/:,1<.2=/5=25;169078079468368349338138119.19..9+/:,1<.2?.5B18E4:I6;J7;C87?428.-3)-0%/1&24'48)4<'ER8_pPr‹d}šnwœifXT}EUrBTqASp@Sp@TqAUrBVsCVsCWtD[xH]zJ\yI^{K_|L\yIVsCK\JD8f\Z†|z«¡ŸÁ·µËÃÁÕÐÍãâÞîïé÷øðùöíüòèÿóéÿóíÿäß즤´if«K=³QDÁYNÇ[QÆQH¿D=ÂA<ËD@Ë@=Ï?>Ð@?ÑB>ÒC?ÒC?ÑC?ÑC?Ö>9Ô@<ÒD@ÉE@½D<¯@9 >5•<4Œ<3‡=2ƒ=1=0=/~<.=/€Qn>Qn>Qn>Qn>Qn>Sp@Sp@WtD[xH]zJ]zJ_|L_|LZwGQn>ESF6D7(6)gdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUneVneVofWpgXpgXpgXinrz‚…“š «´¹ÄÍÒÜåêì÷ùôþÿôþýöÿüúÿúûÿ÷ûþóøúìõöæòóãòþêôýèôüåóøáòöÛëëÏØ×¹ÅÄ¥±°’ŽregOMP;EL:EM>EODGSG~zqŸ›’ƽ¸ÙÎÌáÓÒçÛÛôêéü÷ôðïëûüöÿÿöÿþôÿúñÿôêÿçÞÿÚÒß‘}·fS¢K:²UF½WKµF;·@8ÈKEÇC>ÊC?ÌB?ÎC@ÎC>ÍD>ÍD>ÌC=Ô@<ÒC=ÎE?ÅD?¸A;ª=8ž;5•<4Œ<3‡=4ƒ=3=2=1~<0=1=/~:/~:/~:/}9.|90{8/{8/{8/|<3{;2{;2y:3y:3x92w81w81m80l7/j8/j8/i7.i7.g7-g7-g7-g7-f7-f7-f7-f7-f7-d8-i70h6/g5.f5.g6/h70g6/e6.a2*e6.^2)\0'`4+a5,i=4|PGQJBE>6:6-85,99/8:/47,36+4:.5;/5;/69.69.68-57,46+19,19,19,19,19,19,19,19,08+.9+.9+/:*0;+3>.6A17B2gw]umv‘nf‰_RwKAh;Mj:Nk;Pm=Pm=Nk;Nk;OlVsCZwG]zJ^{K_|L_|LVsCLi9=H@/:2#.&gdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUneVneVofWpgXqhYqhYcjpmtz„’£¬±¾ÉÍÓÞâåðòðüüòüûõþùøÿ÷úÿôüÿòúýìøùçöøãööìù÷ëúöêýöæÿôâøëØçØÁÖƯÀ±šŸ“}vn[ZWFOQCQWKYcZbme–˜‹²²¦ÕÎÆêÜÙõããüéëÿñôÿ÷ùÿýýýþùøûôõûñúýòÿÿóÿÿóÿÿñÿãÊ¹q[¨WD¬SCµQB¹MA¿JAÂG@ÆE?ÉE@ÊE@ÊE>ÉD=ÈC<ÈC<ÒC?ÒD@ÌEAÂC=³=9¦;5œ;5•<6Œ<5‡<6ƒ=5=4<3~<0=1€<1~:/~:/~:/}9.|90{8/{8/y90{;2{;2z:1x92w81v70v70u6/k90j8/j8/j8/j8/h8.h8.h8.g7-f7-f7-f7-d8-d8-d8-d8-h6/h70i81i81h70i81j;3l=5g80k<4b6-a5,oC:xLCtI@uJA:=647036/7:18;247.14+25,58-58-57,46+46+46+46+46)/7(08)08)08)08)08)08+08+19,08+08+/7*08+19,3;.4e9Jg9Li;Nk=Nk=Li;Li;Mj
    UrDYvH[xJ]zL^{M\yKQn@Eb47@;+4/!*%gdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUneVofWpgXpgXqhYriZhowmt|‚‹’¥®µÂÍÑÔßãäïñòþþóýüôÿùöÿ÷úÿôüÿñýÿíýÿêýÿêÿöñÿøóÿ÷ïÿ÷íÿöëÿïáöÜÍäʹƯ§”ƒ€sce]P[YM_bYovo|…€¦­¾À³ÚÖÍñãàÿìíÿñôÿñ÷ÿñ÷ÿ÷ûûúøøÿøøÿúôÿõîÿïòÿï÷ÿóÿñÖÿðÖÿÈ°Å}g¢O=®Q@¸RD³C8ÀIAÄH@ÇF@ÇF@ÈE=ÇD<ÆC;ÆC;ÓD@ÐE@ÊE@¾A=±;7£74š93•<6Œ<5‡<6ƒ=5=4<3~;2<3=1~:/~:/~:/}9.|90{8/{8/y90z:1z:1y90w81v70u6/u6/t5.k90k90j8/j8/j8/i9/i9/h8.f7-f7-f7-d8-d8-d8-d8-d8-f5.i81l;4k:3j92j92m>6qB:n?7pD;g;2g;2SJŒaXTKpE<6=52913:27<5492/5+25,9<345-35*24)13(13(35(46)57*,7',7'-8(-8(-8(-8(-8(/7(19*08)08+/7*/7*/7*08+08+7@+9B-=D2=D2=A29;-35'/3$3:*JVBcr[f}a\wVLnICgA=c:He7Kh:Nk=Nk=Kh:Jg9Li;Nk=TqCWtFZwI[xJ]zLZwINk=A^05;9*0.!'%heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheTheVhdYkd\kd\md]meZmfVg`MjeOnlWnl]ff^eeeqqy‡‘“–ž¡«³¶ÃÈËÙÝàìíï÷÷÷ûùúþýûÿþúÿÿûýþøûüöùüóúýôùÿõùúõùúôøúïúûëûýèöùÞäçÈÒÖµ¶¼š”›ymvW\fK`lTq~lƒ‘€žŽ··µËËÉââàïïíôôòøøöúúøùù÷þþüþþüþþüþþüþþüþþüþþüþþüæÿÿðÿÿûÿÿýïîЪ§ a\™D=¸MEÄKBÈC:ÊA7ÎD:ÑH>ÏJAÉI>ÆG>ÁJ2¿K4¹L5¯K4 H2”F2ŒE3‡E5‚D5C6€@4‚>3…;2‡9/Š7/6-~:1~:1}90|8/{7.z7.y6-x5,w7-w7-x8.x8.v8-u7,s5*q3(h91h91h91g80h70g6/g6/g6/f5.h6/i70j81i70h6/f4-g2,k1-k4/n70m80k9.j:.i>.iB1dC2gJ8aJ8raOyn\ƒ|j…‚qOL;4:04:04:039/39/39/28.28.17-17-17-06,06,/5+/5+/5+/4./4./4./4./4./4./4./4.05//4./4..3-.3-/4./4.05/0;32=55A77C98D86B64@22?.3@.DQ=WeN\jSSaHHV=DR8FT:Ic>Ke@Ke@Ke>JeOjAUpGYtK\vO]wR]wTWpPHaC8Q3).2&+/$)-heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheTheVhdYkd\kd\md]meZmfVjcPlgQmkVlj[gg_lll~~†’ž§±³¹ÁÄÏ×Úâçêðô÷ûüþÿÿÿÿþÿþýûÿþúÿÿûþÿùûüôøûòøûò÷ýóøùóøùñøúíøùéùûåòõÚáâÃÌЯ´¸—‘–vkrSYaI_kUtoŒ˜Š›©œÀÀ¾ÓÓÑççåóóñ÷÷õûûùüüúûûùþþüþþüþþüþþüþþüþþüþþüþþüîÿÿôÿÿüÿÿÿüúÿíêñ¿¸Ã}u¢J@³K@»J<ÅK>ÈJ>ÄD9½=2¿?6ÃD;ÂH3ÃJ7½M9³J7¦G5™C4D6‹F7ƒC7C8A7>5‚<4„:1†91‡81}:2}:2|91z:1y90x8/w7.v7.u6-v7.t8.t8.t8.r6,p4*o3)i81i81i81h70h70h70g6/g6/e3,e3,g5.h6/j81j81j81k92k60l71m80l:1k;/l>1j@0iD2hG6kP=gR?ufSvd‹†s†ƒrML:4:039/39/39/28.28.28.17-17-17-17-06,06,/5+/5+/5+/4./4./4./4./4./4./4./4.05//4..3-.3-.3-.3-/4.05/-80/:21=34@66B66B66B45B16C1CPAO6BP7FT:Ic@Jd?Ke@Ke>Ic3L/).2',0$)-heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheTheVhdYkd\kd\md]meZmfVmhTmhRmkVjk[jkcvxw‘‘™¨ª¶¾ÈÊÓÛÞêòõ÷üÿüÿÿþÿÿÿÿÿÿþÿþýûÿþúÿÿúýþøúûóõøïóöëñ÷ëô÷îöøíöøêö÷åõ÷áîîÔÛÛ¿ÉÊ«°±’“–yuy^kpZt{iˆ§œ¬¶­ÎÎÌÞÞÜïïíøøöûûùþþüþþüýýûþþüþþüþþüþþüþþüþþüþþüþþü÷ÿÿùÿÿþÿÿÿüúÿúôÿöíÿÑÄÙž•L=§Q@¬K;ª>1¸G9ÑXMÐTJ¾?6ÆD6ÇH9ÄJ=¹I=ªB7?5•A7’E=‡A9„A9@:>8~>5<4<4€;4x<2x<2w;1w;1v:0u9/t:/t:/s9.r9.r9.r9.q8-n8,l6*k5)j81j81j81j81i70i70i70h6/g5.g5.g5.g6/h70i81k:3k:3l;4k:3i:0j;1k?2lB4iD2fE2fI7lVAjYEviV†l‘Ž{€mEF439/28.28.28.17-17-17-06,17-17-17-06,06,/5+/5+/5+/4./4./4./4./4./4./4./4./4./4..3--2,-2,.3-/4./4.*5-+6.-9//;12>24@46B47D38E3?L:ER>CQ:;I28F->L3ES:H`>Jb@LdBKc?Ia=G`9F_8G`9RkDXpL]uS^vVZqTPgK=T8,C)).2',0%*.heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheTheVjcYkd\kd\md]meZmfVniUljSlkVlm]pqi€‚ž¡¨º¼ÈÃÍÏÜäçóûþûÿÿúþÿüýÿýýýüûùÿþüÿÿûÿþùûüôõöîîñæëîãçíáíñãðôåñôãòôßðòÜêêÐÙؼÈÇ«²±•¡¡‡‘“}‘’€œžª­¢¶»´ÀÅ¿ÜÜÚééçööôûûùýýûÿÿýÿÿýýýûþþüþþüþþüþþüþþüþþüþþüþþüüúÿÿþÿÿþÿöòïûôîÿýóÿûíÿõäêı·ƒn”Q>¡P=¸XH¸L?¸D7ÀG<Ç>4ÉD;ÈH?¿F>°?9¢;6š=8–A>?;‡@<@<}@;z?9y@9x?8v?8v=4v=4v=4u<3s=3r<2r<2q;1o;0o;0o;0l:/k9.j8-j8-i7,n72n72m61l71l71k60i70i70l:3j92h70g6/f7/f7/h91h91j?6f>4e=1f>2hC3iE5gF3cG2cJ6hV@k\GskV‡‚nŽzor_9>*28.28.17-17-17-06,06,06,17-17-17-06,06,/5+/5+/5+.3-.3-.3-.3-.3-.3-.3-.3-.3-.3--2,-2,-2,-2,.3-.3-)4,)4,*6,+7-.:01=14@25A36C2:G5Æ=7ÈA;ÈD?ÀC?´<;©98 9:›==‘==Š>>„@?|A=xA6s>6s>6r=5p>5p>5p>5n>4n>4m=3l<2j;1j;1i:0i:0i:0p62p62p62o51m61m61k60i70l;4k:3h91e90e90e90e:1f;2dB6cA5cC4dD5fG5eH6cH3_I2^L6eV?jbKrmW„ƒn„‡r[`L3;&28.28.17-17-17-06,06,06,17-17-17-06,06,/5+/5+/5+.3-.3-.3-.3-.3-.3-.3-.3--2,-2,,1+,1+,1+,1+-2,-2,,6.+5-*4,*4++5,.8-0:/2=/2=-5@06A05A-1=)1=)5A+9E/=O5AS9FY=I\@J]?J]=K^>L_?TgG\oQcvZbtZYkSK]G6G4$5"&+.$),"'*heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheTheVjcYkd\lc\md]meZlfVlgSljSlnXorasvm…„Ÿ¤ª¸¿ÉÖßäîöùùÿÿûÿÿùýÿþÿÿÿÿÿþýûÿÿûÿÿúüüôóõêëíâãçÙßãÕÜãÓäéÒçìÕéíÖêìÔëëÓèæÏßÚÄÔθÔͺÍƶËøÐÉÁÙÒÌàÛØëååòîïòòðùù÷ýýûýýûýýûÿÿýþþüüüúþþüþþüþþüþþüþþüþþüþþüþþüÿøüÿöùÿýýþÿý÷ÿýïÿøëÿõòÿøëúçÿÿíÿïÛ̧”£lX£ZG­VCªM;ÁA8ÃB<ÃD>¿D?·?>­;;£99œ:;–<<Ž>?…?=}@=wB7o>7n?7o@8n?7m>6i=4h<3h<3h<3i=4r73q62q62p62o51m61l71j81h70g80e90e:1d<2f>4f@5gA6]C4aG8cL:dM;cM8`K6]K3]M4]Q9`Y?miPss[€„mt|eFO:2>(39/28.28.28.17-17-17-06,17-17-17-06,06,/5+/5+/5+-2,-2,-2,-2,-2,-2,-2,-2,-2,,1++0*+0*+0*+0*,1+-2,,6.,6.*4,*4+*4++5*-7,.9+-8*0;+4?/5@/4?.3>-3?+4@,7F/;J3@P6DT:GWºH=ºH>ºG@·F@°C@¦=:97—<;‘=;ˆ>;€A5i=4j>5j>5k?6s63r73q62p62n72l71j81i81d8/d90c;1d>3d@4cA5cA5bB5VG4^OmmSsw^z‚jcmU2>(5C,4:039/39/39/28.28.28.17-17-17-17-06,06,/5+/5+/5+-2,-2,-2,-2,-2,-2,-2,-2,,1+,1++0**/)*/)+0*,1+,1++5-+5-*4,*4,+5,+5,,6+-7,,7)/:,2=/6A17B27B25@/4?.2?+5B.:G3>L5AO6ES:JX?M[BTbI]kTcqZ_lXUbPERA2>0#/#(..&,,$**heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVjdTjdVjcYkd\lc\md]lfZlfVomXmmUimVgkZembr{xŽ—œ¨±ºÊÓØäëñöþÿ÷üÿøüÿþÿÿÿÿÿúù÷ÿÿúýýõøøîðòåéëÝåéÚåéØåìÚæíÎèïÐéîÐæéÎèæÏèãÏáÚÈÙÏÃÚÍÄßÒÌìÞÛúììÿôöÿõùÿõûÿøþýýûÿÿýÿÿýþþüþþüÿÿýÿÿýýýûþþüþþüþþüþþüþþüþþüþþüþþüÿüúÿýúÿûøùýüøÿÿôÿÿðÿÿêþüðÿûùÿûÿÿôÿöæÿôßÿãÍ×­”¢sY°SA®Q?®N>°O?±OB¯J@¥C:š<4—<7‘>8‰?6ƒ@7{B7tD6qE8nG8s>:s>:s>:q>:q>:q>:q>:p?:sB=rA8l=7l=7m>8n?9r73r73q73n72m82j81i81f:1f;2d>3d@4bB5`C5]A3\@2[?1QI4[S>f^Gg_H`Y?ZS9ZS7\W:ZV;WW;knSrx^u}eUaI%37E.4:04:04:039/39/39/28.28.17-17-17-06,06,/5+/5+/5+-2,-2,-2,-2,-2,-2,-2,-2,,1++0*+0**/)*/)+0*+0*,1+)3+)3+*4,+5-+5,,6--7.-7,,6+.8-2=/6A39D69D67B46A1/<*2?-5B09F2:u@:s@9o>9o>9n72n72n93m;4l;4j;3g<3d<2c?3^>1dG9cG9T=-O8(M8'D/TR;PN7KI0MK2]Y>ieJeaDVU7XX<]`CosXz€fcmT=I1,:#1?(5;15;14:04:04:039/39/39/39/39/39/28.17-17-17-06,16016005/05//4./4./4./4.,1+,1+,1+,1+,1+,1++0*+0*.5.-4--4-,3,-4--4-.5-.5-+2*-4,08-5=29A6=E:?G7B25@03>-1<+2>*9E/BN8IU?O[EVbN]hWYdTLWIF5F4‰D4…D2}B0yB.s@-o?+v?:t=8u>9v?:t?9q<6r=7sA:q?8q?8q?8o>7o>7n=6n=6n=6l;4m<5m>6k?6j?6h@6eA5cA5dG9[A2^G7\I8N=+F7$G8%A4!IM4GK2DG,BE*MM1[[?abC`aBYY=dgJsw\sy_X`H8D,/;%6D-7=36<26<26<25;15;15;15;15;15;15;14:04:039/39/39/27127127116016016005/05/.3-.3--2,-2,,1+,1++0*+0**1**1*)0))0))0)*1*+2+,3,.5--4,.5-07/4;39@8?F>BIA:G69F56C13@.2?+5B.;I2?M6KXDR_KXeSVcRKWI8p;5q<6vA;sA:p>7r@9xG@n=6n=6n=6m>6l=5l=5l=5l=5g?5h@6gA6gC7eC7cC6`C5^D5aL;UB1ZI7`S@RG3C;&E=(GA+>G,BH.@F*<@%?B%LO2_`AijKaaEnqTvz_gmSHP84<%4=(=F18>48>48>48>47=37=37=36<28>48>47=37=37=36<26<26<25:449349349338238238227105/05//4..3--2,,1++0*+0*(/((/((/((/((/()0)*1*+2+070.5.+2++2+.5.5<5K:4-9/-3/-3/,2.gdUgdUheVheVheVheVifWifWifWifWifWifWifWifWifWifWleUldWlcZmd]md]mf^mg[khWmlWimThpXht`hthm|wˆ—š¥´»ÀÉÐÔÛáéðööûÿúþÿýþÿÿÿýÿþúþþöýýñúûí÷úéô÷âîóÝçìÕàèÐÜà¿×Ú»ÖÖ¼Ù×ÂÝ×ÉßÖÍåÛÙìàâøìðüïöÿõûÿùþÿúýÿûûÿûûÿýúþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüöÿþ÷ÿþúÿþþþÿÿüÿÿùÿÿøÿÿ÷þÿøÿÿøüÿùùÿýúÿÿøþÿøúÿõöÿóÿþìÿýéÿòßÿñÛÿðÚñÒ½³zyS3i?3i?3i?3f>2f>2f>2f>2aA4`C5`C5_C5^D5[D4ZE4VE3XI6OB/\T?oiSc^HMK4IG0LJ3;E*?H->G*48>47=37=37=39?58>48>48>48>48>48>48>47<67<67<66;56;56;55:45:438238216005//4.-2,,1+,1++0,+0,*/+*/++0,,1--2.-2.051.3/+0,+0,-2.2738=9'4.:0.5..5.-4-gdUgdUgdUheVheVifWifWifWifWifWifWifWifWifWifWifWleUldWlcZmd]md]mf^mg[khWkmWjnUiqYgs_drejyt…”—¡²¹¾ÇÎÓÚâèïõôùýùýÿýþÿÿÿýÿÿúÿÿøÿÿóþÿñûþë÷úåðõÞèîÔàéÎÛܽÕÕ¹ÑÑ·ÔѾÚÔÈáØÓêàßôéíþóùÿöþÿûÿÿýÿÿþÿÿþúÿþúþÿùþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüøÿÿøÿÿûÿÿþþþÿýþÿûüÿûúÿúúÿùùÿù÷ÿù÷ÿüùÿÿûþÿûûÿüùÿûùôîÿÿöÿþôÿýóÿüîÿ÷çùçÓéӾϴŸ¶š„•u`yVBlI5mH6rM;uP>mF7iB3gB2jE5nI9oJ:pK;oK;eA1eA1cB1cB1cB1cB1cB1bC1\G6\G6\G6ZG6YH6WH5TG4RG3PH3MH2fdM~~fprZVX@IM4HL3;E*A.;>+9?59?59?58>48>47=37=37=38>48>48>48>48>48>48>48>49>89>89>88=78=78=77<67<66;55:449338227105//4./4.-2.-2.,1-+0,+0,,1--2.-2.,1-,1-,1-,1-.21043376598:H7=L9@O<@O:8F91?2,9/.5.-4-,3,fcTfcTgdUheVheVifWjgXjgXifWifWifWifWifWifWifWifWleUldWlcZmd]md]mf^mg[khWkmWioUiqYgs_bpcgxr‚”– ³¹ÁÊÑÕÜäéðöõúþùýÿýÿþÿÿýÿÿúÿÿöÿÿôÿÿñÿÿïúýèò÷àéïÕàéÎÙÚ»ÑѵÍË´Î˺ÖÏÅßÕÓìâãøíóÿöþÿùÿÿüÿÿýÿÿÿýþÿúýÿ÷þÿøþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüýýÿýþÿýþÿýÿþþþüþÿùþÿ÷ÿÿõýýóýýõþýøþýùÿþüÿýÿÿýÿÿþÿþùÿÿüÿÿúþúöõýøôÿþöÿþñÿþïÿûéÿóàöåÓåÓ¿Ò»©¹ŸŸƒuŽrd|]I}^JrVAaE0W;&Y=(Z?*X=(`E0`E0_F0_F0`G1`G1^H1^H1[L9ZM:ZM:XM9XM9UM8RL6QL6NL5QQ9ikS|€glrXSY?DM2>G,:G+48>48>48>47=37=38>48>48>48>49?59?5:?9:?9:?9:?99>89>89>88=78=78=77<66;55:4493382382/40.3/-2.,1-+0,+0,+0,+0,+/.,0/-10.21/32/32/32.210A.5F3;M7>P:=O7:L47I/6H.3E-6H0:L6MJ9EB1;A7;A7;A7;A7:@6:@6:@69?58>48>48>49?59?5:@6:@6:@6;@:;@:;@::?9:?99>89>89>8:?9:?99>89>88=78=77<67<6495273162/40-2.,1-+0,+/.,0/,0/-10.21.21.23-12,01):'/@-6H2;M5=O7?I.9F*?L0=J.AN2DN3HQ4LR6IN0JM0ZY;miLhdIc]C_YA_ZD`[GZUBQN=LI8=C9=C9=C989>89>8;@:;@:;@:;@::?9:?9:?9:?99>:8=95:6384162/40.3/.21.21.21-10-12,01,01-12-12$5"*<&3E/9K3XW9UT6SR3KE/JD.FA-D?,A>/@>1??3>@5<=5;>59?59A67B48C57C57D3:B79A69A68@58@59A69A6:B7:B7:B79A6:B7;C8F;7B:7C97A66A16?.4<-39-270.5./51-7/-9+-<%.B3J7O7Z 8Y$8W+:U2:R8;P==O?>O=:L6@R8EX:EZ;DY:>U93J0(>'.5-,3++2*ZgM[hN\hP_iQakSckTglXhkXghVihVifWifWkeWmeXmeZnf[khWkhYkg[kg^jf]jf]hfZgeVgjWglVfoZerajwnzŠ‰š«²·ÉÓÑØÞáéìò÷úøþþùþúúÿøûþóúüï÷úé÷øæõôâíìØéæÓåâÏÜ×ÄÑ̹˾­Á´¤º¬Ÿ¼¯§Á¶²ÌÀÀÛÐÖèÞæûóþý÷ÿþûÿÿþÿþýÿüýÿüýÿüýÿþþþþþþþþþþþþþþþþþþÿþüÿþüÿþüÿýúÿýúÿüùÿüùÿýùÿýùÿþúÿþýÿýüÿüûÿýþÿþÿÿþÿÿýþýûüÿþÿÿýýÿüùÿøóøíçòåÝöèßÿïçÿûÿÿýÿÿýþÿÿýÿÿûýÿüýÿþüýÿýþÿþýÿÿýÿÿýþÿý÷ÿþîÿÿæÿÿâ÷÷ßýûââàÇ‹‡lRM0TM0QK+SJ+WN/UO/UN1TO1SO2QP4QP4PP6QM2PO3PN5PP6MO7KO6HM6EM5HQ6EN3BK.AH)BI(GM+JP,KQ-NR/PT1VZ9^aBaaE[[?VVVV>XV=YW>XW;XW9WV8VU7QK5OI3LG3ID1DA2B@3??3>@5<=5;>59?59A67B48C57C57D3:B79A69A68@58@59A69A6:B7:B7:B7:B7:B7;C8F;76<83=51=/3B+9M*BY-Ia1Nq7Mn9Ji=Fa>AY?:L<:K9=O9DV5:@69A67B47B47C57D3:B7:B79A69A69A69A6:B7:B7:B7:B7:B7:B7;C8F;>F;>IA>J@?I>>I9?H7>F7>D8=B;>E>;A=6@85A39H1BV3Pg;ZrB]€F\}HVuIMhEBZ@9N;5G74E3XR6F;?G<>H=>I9?H7>F7>D8=B;=D=;A=6@85A39H1DX5Ri=]uEY|BXyDRqEIdA,6H2@R8L_AQfGShIMdH@W=4J329107/-4,YgMZhN\hP^jRblTemVgoZjo[lo\lm[mk\mj[nhZnhZoi]ph]liXkhYjfZie\ie\ie\ig[igXfiVchRajUerao|s{‹ŠŽŸ¦Ÿ±»ÂËÒÕÜäéðöòúüôúøñöðíðçéëÞáãÕÚÛËÒÑ¿ÌɶÉıþ«¾¹¦»´¢Ë¾®ÓŸÝÏÄæÙÑíâà÷ëíÿôúÿøÿÿ÷ÿÿúÿÿüÿþýÿýüÿûüþüþýþÿÿþþþþþþþþþþþþþþþþþþÿþüÿþüþýûÿüùÿýúÿýúÿýúÿû÷ÿúöþùõÿýüÿûúýùøüúûþüýÿýþÿþÿÿýþÿüýÿüüÿüùÿøó÷ìæòåÝøêáÿóëÿûÿÿýÿÿýþÿÿûÿÿûýÿúýÿüüýÿüýÿþýÿÿþÿÿþýÿþõÿüìÿüãÿúÝþýèÿÿëåãÌŒˆoRL2UN2TM0WN1VM.UO/WP3VQ3UQ4QP2ON2MM1PL1NM1NL3MM3LN6LP7KP9JR:LU:IR7JS6QX9SZ9U[9]c?gmI€”a’¦sŸ±š«’¡xˆ”pr|Z\bFLP7KM7LK6KI4NI5PK7TM:VP:WQ;VP:SN:QL9LI:IG:EE9CE:=>6F;?G<=G<=H8>G6=E6=C7=B;:A:9?;5?75A39H1BV3Ne9Wo?Sv /* to declare isdigit() */ + + +#if TRANSFORMS_SUPPORTED + +/* + * Lossless image transformation routines. These routines work on DCT + * coefficient arrays and thus do not require any lossy decompression + * or recompression of the image. + * Thanks to Guido Vollbeding for the initial design and code of this feature, + * and to Ben Jackson for introducing the cropping feature. + * + * Horizontal flipping is done in-place, using a single top-to-bottom + * pass through the virtual source array. It will thus be much the + * fastest option for images larger than main memory. + * + * The other routines require a set of destination virtual arrays, so they + * need twice as much memory as jpegtran normally does. The destination + * arrays are always written in normal scan order (top to bottom) because + * the virtual array manager expects this. The source arrays will be scanned + * in the corresponding order, which means multiple passes through the source + * arrays for most of the transforms. That could result in much thrashing + * if the image is larger than main memory. + * + * If cropping or trimming is involved, the destination arrays may be smaller + * than the source arrays. Note it is not possible to do horizontal flip + * in-place when a nonzero Y crop offset is specified, since we'd have to move + * data from one block row to another but the virtual array manager doesn't + * guarantee we can touch more than one row at a time. So in that case, + * we have to use a separate destination array. + * + * Some notes about the operating environment of the individual transform + * routines: + * 1. Both the source and destination virtual arrays are allocated from the + * source JPEG object, and therefore should be manipulated by calling the + * source's memory manager. + * 2. The destination's component count should be used. It may be smaller + * than the source's when forcing to grayscale. + * 3. Likewise the destination's sampling factors should be used. When + * forcing to grayscale the destination's sampling factors will be all 1, + * and we may as well take that as the effective iMCU size. + * 4. When "trim" is in effect, the destination's dimensions will be the + * trimmed values but the source's will be untrimmed. + * 5. When "crop" is in effect, the destination's dimensions will be the + * cropped values but the source's will be uncropped. Each transform + * routine is responsible for picking up source data starting at the + * correct X and Y offset for the crop region. (The X and Y offsets + * passed to the transform routines are measured in iMCU blocks of the + * destination.) + * 6. All the routines assume that the source and destination buffers are + * padded out to a full iMCU boundary. This is true, although for the + * source buffer it is an undocumented property of jdcoefct.c. + */ + + +LOCAL(void) +do_crop (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* Crop. This is only used when no rotate/flip is requested with the crop. */ +{ + JDIMENSION dst_blk_y, x_crop_blocks, y_crop_blocks; + int ci, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + jpeg_component_info *compptr; + + /* We simply have to copy the right amount of data (the destination's + * image size) starting at the given X and Y offsets in the source. + */ + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_y + y_crop_blocks, + (JDIMENSION) compptr->v_samp_factor, FALSE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + jcopy_block_row(src_buffer[offset_y] + x_crop_blocks, + dst_buffer[offset_y], + compptr->width_in_blocks); + } + } + } +} + + +LOCAL(void) +do_crop_ext (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* Crop. This is only used when no rotate/flip is requested with the crop. + * Extension: If the destination size is larger than the source, we fill in + * the extra area with zero (neutral gray). Note we also have to zero partial + * iMCUs at the right and bottom edge of the source image area in this case. + */ +{ + JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height; + JDIMENSION dst_blk_y, x_crop_blocks, y_crop_blocks; + int ci, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + jpeg_component_info *compptr; + + MCU_cols = srcinfo->output_width / + (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size); + MCU_rows = srcinfo->output_height / + (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_width = MCU_cols * compptr->h_samp_factor; + comp_height = MCU_rows * compptr->v_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + if (dstinfo->jpeg_height > srcinfo->output_height) { + if (dst_blk_y < y_crop_blocks || + dst_blk_y >= comp_height + y_crop_blocks) { + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + FMEMZERO(dst_buffer[offset_y], + compptr->width_in_blocks * SIZEOF(JBLOCK)); + } + continue; + } + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_y - y_crop_blocks, + (JDIMENSION) compptr->v_samp_factor, FALSE); + } else { + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_y + y_crop_blocks, + (JDIMENSION) compptr->v_samp_factor, FALSE); + } + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + if (dstinfo->jpeg_width > srcinfo->output_width) { + if (x_crop_blocks > 0) { + FMEMZERO(dst_buffer[offset_y], + x_crop_blocks * SIZEOF(JBLOCK)); + } + jcopy_block_row(src_buffer[offset_y], + dst_buffer[offset_y] + x_crop_blocks, + comp_width); + if (compptr->width_in_blocks > comp_width + x_crop_blocks) { + FMEMZERO(dst_buffer[offset_y] + + comp_width + x_crop_blocks, + (compptr->width_in_blocks - + comp_width - x_crop_blocks) * SIZEOF(JBLOCK)); + } + } else { + jcopy_block_row(src_buffer[offset_y] + x_crop_blocks, + dst_buffer[offset_y], + compptr->width_in_blocks); + } + } + } + } +} + + +LOCAL(void) +do_wipe (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + JDIMENSION drop_width, JDIMENSION drop_height) +/* Wipe - drop content of specified area, fill with zero (neutral gray) */ +{ + JDIMENSION comp_width, comp_height; + JDIMENSION blk_y, x_wipe_blocks, y_wipe_blocks; + int ci, offset_y; + JBLOCKARRAY buffer; + jpeg_component_info *compptr; + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_width = drop_width * compptr->h_samp_factor; + comp_height = drop_height * compptr->v_samp_factor; + x_wipe_blocks = x_crop_offset * compptr->h_samp_factor; + y_wipe_blocks = y_crop_offset * compptr->v_samp_factor; + for (blk_y = 0; blk_y < comp_height; blk_y += compptr->v_samp_factor) { + buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], blk_y + y_wipe_blocks, + (JDIMENSION) compptr->v_samp_factor, TRUE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + FMEMZERO(buffer[offset_y] + x_wipe_blocks, + comp_width * SIZEOF(JBLOCK)); + } + } + } +} + + +LOCAL(void) +do_flip_h_no_crop (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, + jvirt_barray_ptr *src_coef_arrays) +/* Horizontal flip; done in-place, so no separate dest array is required. + * NB: this only works when y_crop_offset is zero. + */ +{ + JDIMENSION MCU_cols, comp_width, blk_x, blk_y, x_crop_blocks; + int ci, k, offset_y; + JBLOCKARRAY buffer; + JCOEFPTR ptr1, ptr2; + JCOEF temp1, temp2; + jpeg_component_info *compptr; + + /* Horizontal mirroring of DCT blocks is accomplished by swapping + * pairs of blocks in-place. Within a DCT block, we perform horizontal + * mirroring by changing the signs of odd-numbered columns. + * Partial iMCUs at the right edge are left untouched. + */ + MCU_cols = srcinfo->output_width / + (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_width = MCU_cols * compptr->h_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + for (blk_y = 0; blk_y < compptr->height_in_blocks; + blk_y += compptr->v_samp_factor) { + buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + /* Do the mirroring */ + for (blk_x = 0; blk_x * 2 < comp_width; blk_x++) { + ptr1 = buffer[offset_y][blk_x]; + ptr2 = buffer[offset_y][comp_width - blk_x - 1]; + /* this unrolled loop doesn't need to know which row it's on... */ + for (k = 0; k < DCTSIZE2; k += 2) { + temp1 = *ptr1; /* swap even column */ + temp2 = *ptr2; + *ptr1++ = temp2; + *ptr2++ = temp1; + temp1 = *ptr1; /* swap odd column with sign change */ + temp2 = *ptr2; + *ptr1++ = -temp2; + *ptr2++ = -temp1; + } + } + if (x_crop_blocks > 0) { + /* Now left-justify the portion of the data to be kept. + * We can't use a single jcopy_block_row() call because that routine + * depends on memcpy(), whose behavior is unspecified for overlapping + * source and destination areas. Sigh. + */ + for (blk_x = 0; blk_x < compptr->width_in_blocks; blk_x++) { + jcopy_block_row(buffer[offset_y] + blk_x + x_crop_blocks, + buffer[offset_y] + blk_x, + (JDIMENSION) 1); + } + } + } + } + } +} + + +LOCAL(void) +do_flip_h (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* Horizontal flip in general cropping case */ +{ + JDIMENSION MCU_cols, comp_width, dst_blk_x, dst_blk_y; + JDIMENSION x_crop_blocks, y_crop_blocks; + int ci, k, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JBLOCKROW src_row_ptr, dst_row_ptr; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + /* Here we must output into a separate array because we can't touch + * different rows of a single virtual array simultaneously. Otherwise, + * this is essentially the same as the routine above. + */ + MCU_cols = srcinfo->output_width / + (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_width = MCU_cols * compptr->h_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_y + y_crop_blocks, + (JDIMENSION) compptr->v_samp_factor, FALSE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + dst_row_ptr = dst_buffer[offset_y]; + src_row_ptr = src_buffer[offset_y]; + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) { + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Do the mirrorable blocks */ + dst_ptr = dst_row_ptr[dst_blk_x]; + src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1]; + /* this unrolled loop doesn't need to know which row it's on... */ + for (k = 0; k < DCTSIZE2; k += 2) { + *dst_ptr++ = *src_ptr++; /* copy even column */ + *dst_ptr++ = - *src_ptr++; /* copy odd column with sign change */ + } + } else { + /* Copy last partial block(s) verbatim */ + jcopy_block_row(src_row_ptr + dst_blk_x + x_crop_blocks, + dst_row_ptr + dst_blk_x, + (JDIMENSION) 1); + } + } + } + } + } +} + + +LOCAL(void) +do_flip_v (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* Vertical flip */ +{ + JDIMENSION MCU_rows, comp_height, dst_blk_x, dst_blk_y; + JDIMENSION x_crop_blocks, y_crop_blocks; + int ci, i, j, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JBLOCKROW src_row_ptr, dst_row_ptr; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + /* We output into a separate array because we can't touch different + * rows of the source virtual array simultaneously. Otherwise, this + * is a pretty straightforward analog of horizontal flip. + * Within a DCT block, vertical mirroring is done by changing the signs + * of odd-numbered rows. + * Partial iMCUs at the bottom edge are copied verbatim. + */ + MCU_rows = srcinfo->output_height / + (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_height = MCU_rows * compptr->v_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + if (y_crop_blocks + dst_blk_y < comp_height) { + /* Row is within the mirrorable area. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + comp_height - y_crop_blocks - dst_blk_y - + (JDIMENSION) compptr->v_samp_factor, + (JDIMENSION) compptr->v_samp_factor, FALSE); + } else { + /* Bottom-edge blocks will be copied verbatim. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_y + y_crop_blocks, + (JDIMENSION) compptr->v_samp_factor, FALSE); + } + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + if (y_crop_blocks + dst_blk_y < comp_height) { + /* Row is within the mirrorable area. */ + dst_row_ptr = dst_buffer[offset_y]; + src_row_ptr = src_buffer[compptr->v_samp_factor - offset_y - 1]; + src_row_ptr += x_crop_blocks; + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; + dst_blk_x++) { + dst_ptr = dst_row_ptr[dst_blk_x]; + src_ptr = src_row_ptr[dst_blk_x]; + for (i = 0; i < DCTSIZE; i += 2) { + /* copy even row */ + for (j = 0; j < DCTSIZE; j++) + *dst_ptr++ = *src_ptr++; + /* copy odd row with sign change */ + for (j = 0; j < DCTSIZE; j++) + *dst_ptr++ = - *src_ptr++; + } + } + } else { + /* Just copy row verbatim. */ + jcopy_block_row(src_buffer[offset_y] + x_crop_blocks, + dst_buffer[offset_y], + compptr->width_in_blocks); + } + } + } + } +} + + +LOCAL(void) +do_transpose (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* Transpose source into destination */ +{ + JDIMENSION dst_blk_x, dst_blk_y, x_crop_blocks, y_crop_blocks; + int ci, i, j, offset_x, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + /* Transposing pixels within a block just requires transposing the + * DCT coefficients. + * Partial iMCUs at the edges require no special treatment; we simply + * process all the available DCT blocks for every component. + */ + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; + dst_blk_x += compptr->h_samp_factor) { + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_x + x_crop_blocks, + (JDIMENSION) compptr->h_samp_factor, FALSE); + for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) { + dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; + src_ptr = src_buffer[offset_x][dst_blk_y + offset_y + y_crop_blocks]; + for (i = 0; i < DCTSIZE; i++) + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + } + } + } + } + } +} + + +LOCAL(void) +do_rot_90 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* 90 degree rotation is equivalent to + * 1. Transposing the image; + * 2. Horizontal mirroring. + * These two steps are merged into a single processing routine. + */ +{ + JDIMENSION MCU_cols, comp_width, dst_blk_x, dst_blk_y; + JDIMENSION x_crop_blocks, y_crop_blocks; + int ci, i, j, offset_x, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + /* Because of the horizontal mirror step, we can't process partial iMCUs + * at the (output) right edge properly. They just get transposed and + * not mirrored. + */ + MCU_cols = srcinfo->output_height / + (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_width = MCU_cols * compptr->h_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; + dst_blk_x += compptr->h_samp_factor) { + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Block is within the mirrorable area. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + comp_width - x_crop_blocks - dst_blk_x - + (JDIMENSION) compptr->h_samp_factor, + (JDIMENSION) compptr->h_samp_factor, FALSE); + } else { + /* Edge blocks are transposed but not mirrored. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_x + x_crop_blocks, + (JDIMENSION) compptr->h_samp_factor, FALSE); + } + for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) { + dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Block is within the mirrorable area. */ + src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1] + [dst_blk_y + offset_y + y_crop_blocks]; + for (i = 0; i < DCTSIZE; i++) { + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + i++; + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; + } + } else { + /* Edge blocks are transposed but not mirrored. */ + src_ptr = src_buffer[offset_x] + [dst_blk_y + offset_y + y_crop_blocks]; + for (i = 0; i < DCTSIZE; i++) + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + } + } + } + } + } + } +} + + +LOCAL(void) +do_rot_270 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* 270 degree rotation is equivalent to + * 1. Horizontal mirroring; + * 2. Transposing the image. + * These two steps are merged into a single processing routine. + */ +{ + JDIMENSION MCU_rows, comp_height, dst_blk_x, dst_blk_y; + JDIMENSION x_crop_blocks, y_crop_blocks; + int ci, i, j, offset_x, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + /* Because of the horizontal mirror step, we can't process partial iMCUs + * at the (output) bottom edge properly. They just get transposed and + * not mirrored. + */ + MCU_rows = srcinfo->output_width / + (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_height = MCU_rows * compptr->v_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; + dst_blk_x += compptr->h_samp_factor) { + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_x + x_crop_blocks, + (JDIMENSION) compptr->h_samp_factor, FALSE); + for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) { + dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; + if (y_crop_blocks + dst_blk_y < comp_height) { + /* Block is within the mirrorable area. */ + src_ptr = src_buffer[offset_x] + [comp_height - y_crop_blocks - dst_blk_y - offset_y - 1]; + for (i = 0; i < DCTSIZE; i++) { + for (j = 0; j < DCTSIZE; j++) { + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + j++; + dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; + } + } + } else { + /* Edge blocks are transposed but not mirrored. */ + src_ptr = src_buffer[offset_x] + [dst_blk_y + offset_y + y_crop_blocks]; + for (i = 0; i < DCTSIZE; i++) + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + } + } + } + } + } + } +} + + +LOCAL(void) +do_rot_180 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* 180 degree rotation is equivalent to + * 1. Vertical mirroring; + * 2. Horizontal mirroring. + * These two steps are merged into a single processing routine. + */ +{ + JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height, dst_blk_x, dst_blk_y; + JDIMENSION x_crop_blocks, y_crop_blocks; + int ci, i, j, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JBLOCKROW src_row_ptr, dst_row_ptr; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + MCU_cols = srcinfo->output_width / + (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size); + MCU_rows = srcinfo->output_height / + (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_width = MCU_cols * compptr->h_samp_factor; + comp_height = MCU_rows * compptr->v_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + if (y_crop_blocks + dst_blk_y < comp_height) { + /* Row is within the vertically mirrorable area. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + comp_height - y_crop_blocks - dst_blk_y - + (JDIMENSION) compptr->v_samp_factor, + (JDIMENSION) compptr->v_samp_factor, FALSE); + } else { + /* Bottom-edge rows are only mirrored horizontally. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_y + y_crop_blocks, + (JDIMENSION) compptr->v_samp_factor, FALSE); + } + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + dst_row_ptr = dst_buffer[offset_y]; + if (y_crop_blocks + dst_blk_y < comp_height) { + /* Row is within the mirrorable area. */ + src_row_ptr = src_buffer[compptr->v_samp_factor - offset_y - 1]; + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) { + dst_ptr = dst_row_ptr[dst_blk_x]; + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Process the blocks that can be mirrored both ways. */ + src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1]; + for (i = 0; i < DCTSIZE; i += 2) { + /* For even row, negate every odd column. */ + for (j = 0; j < DCTSIZE; j += 2) { + *dst_ptr++ = *src_ptr++; + *dst_ptr++ = - *src_ptr++; + } + /* For odd row, negate every even column. */ + for (j = 0; j < DCTSIZE; j += 2) { + *dst_ptr++ = - *src_ptr++; + *dst_ptr++ = *src_ptr++; + } + } + } else { + /* Any remaining right-edge blocks are only mirrored vertically. */ + src_ptr = src_row_ptr[x_crop_blocks + dst_blk_x]; + for (i = 0; i < DCTSIZE; i += 2) { + for (j = 0; j < DCTSIZE; j++) + *dst_ptr++ = *src_ptr++; + for (j = 0; j < DCTSIZE; j++) + *dst_ptr++ = - *src_ptr++; + } + } + } + } else { + /* Remaining rows are just mirrored horizontally. */ + src_row_ptr = src_buffer[offset_y]; + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) { + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Process the blocks that can be mirrored. */ + dst_ptr = dst_row_ptr[dst_blk_x]; + src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1]; + for (i = 0; i < DCTSIZE2; i += 2) { + *dst_ptr++ = *src_ptr++; + *dst_ptr++ = - *src_ptr++; + } + } else { + /* Any remaining right-edge blocks are only copied. */ + jcopy_block_row(src_row_ptr + dst_blk_x + x_crop_blocks, + dst_row_ptr + dst_blk_x, + (JDIMENSION) 1); + } + } + } + } + } + } +} + + +LOCAL(void) +do_transverse (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* Transverse transpose is equivalent to + * 1. 180 degree rotation; + * 2. Transposition; + * or + * 1. Horizontal mirroring; + * 2. Transposition; + * 3. Horizontal mirroring. + * These steps are merged into a single processing routine. + */ +{ + JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height, dst_blk_x, dst_blk_y; + JDIMENSION x_crop_blocks, y_crop_blocks; + int ci, i, j, offset_x, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + MCU_cols = srcinfo->output_height / + (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size); + MCU_rows = srcinfo->output_width / + (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_width = MCU_cols * compptr->h_samp_factor; + comp_height = MCU_rows * compptr->v_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; + dst_blk_x += compptr->h_samp_factor) { + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Block is within the mirrorable area. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + comp_width - x_crop_blocks - dst_blk_x - + (JDIMENSION) compptr->h_samp_factor, + (JDIMENSION) compptr->h_samp_factor, FALSE); + } else { + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_x + x_crop_blocks, + (JDIMENSION) compptr->h_samp_factor, FALSE); + } + for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) { + dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; + if (y_crop_blocks + dst_blk_y < comp_height) { + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Block is within the mirrorable area. */ + src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1] + [comp_height - y_crop_blocks - dst_blk_y - offset_y - 1]; + for (i = 0; i < DCTSIZE; i++) { + for (j = 0; j < DCTSIZE; j++) { + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + j++; + dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; + } + i++; + for (j = 0; j < DCTSIZE; j++) { + dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; + j++; + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + } + } + } else { + /* Right-edge blocks are mirrored in y only */ + src_ptr = src_buffer[offset_x] + [comp_height - y_crop_blocks - dst_blk_y - offset_y - 1]; + for (i = 0; i < DCTSIZE; i++) { + for (j = 0; j < DCTSIZE; j++) { + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + j++; + dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; + } + } + } + } else { + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Bottom-edge blocks are mirrored in x only */ + src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1] + [dst_blk_y + offset_y + y_crop_blocks]; + for (i = 0; i < DCTSIZE; i++) { + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + i++; + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; + } + } else { + /* At lower right corner, just transpose, no mirroring */ + src_ptr = src_buffer[offset_x] + [dst_blk_y + offset_y + y_crop_blocks]; + for (i = 0; i < DCTSIZE; i++) + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + } + } + } + } + } + } + } +} + + +/* Parse an unsigned integer: subroutine for jtransform_parse_crop_spec. + * Returns TRUE if valid integer found, FALSE if not. + * *strptr is advanced over the digit string, and *result is set to its value. + */ + +LOCAL(boolean) +jt_read_integer (const char ** strptr, JDIMENSION * result) +{ + const char * ptr = *strptr; + JDIMENSION val = 0; + + for (; isdigit(*ptr); ptr++) { + val = val * 10 + (JDIMENSION) (*ptr - '0'); + } + *result = val; + if (ptr == *strptr) + return FALSE; /* oops, no digits */ + *strptr = ptr; + return TRUE; +} + + +/* Parse a crop specification (written in X11 geometry style). + * The routine returns TRUE if the spec string is valid, FALSE if not. + * + * The crop spec string should have the format + * [f]x[f]{+-}{+-} + * where width, height, xoffset, and yoffset are unsigned integers. + * Each of the elements can be omitted to indicate a default value. + * (A weakness of this style is that it is not possible to omit xoffset + * while specifying yoffset, since they look alike.) + * + * This code is loosely based on XParseGeometry from the X11 distribution. + */ + +GLOBAL(boolean) +jtransform_parse_crop_spec (jpeg_transform_info *info, const char *spec) +{ + info->crop = FALSE; + info->crop_width_set = JCROP_UNSET; + info->crop_height_set = JCROP_UNSET; + info->crop_xoffset_set = JCROP_UNSET; + info->crop_yoffset_set = JCROP_UNSET; + + if (isdigit(*spec)) { + /* fetch width */ + if (! jt_read_integer(&spec, &info->crop_width)) + return FALSE; + if (*spec == 'f' || *spec == 'F') { + spec++; + info->crop_width_set = JCROP_FORCE; + } else + info->crop_width_set = JCROP_POS; + } + if (*spec == 'x' || *spec == 'X') { + /* fetch height */ + spec++; + if (! jt_read_integer(&spec, &info->crop_height)) + return FALSE; + if (*spec == 'f' || *spec == 'F') { + spec++; + info->crop_height_set = JCROP_FORCE; + } else + info->crop_height_set = JCROP_POS; + } + if (*spec == '+' || *spec == '-') { + /* fetch xoffset */ + info->crop_xoffset_set = (*spec == '-') ? JCROP_NEG : JCROP_POS; + spec++; + if (! jt_read_integer(&spec, &info->crop_xoffset)) + return FALSE; + } + if (*spec == '+' || *spec == '-') { + /* fetch yoffset */ + info->crop_yoffset_set = (*spec == '-') ? JCROP_NEG : JCROP_POS; + spec++; + if (! jt_read_integer(&spec, &info->crop_yoffset)) + return FALSE; + } + /* We had better have gotten to the end of the string. */ + if (*spec != '\0') + return FALSE; + info->crop = TRUE; + return TRUE; +} + + +/* Trim off any partial iMCUs on the indicated destination edge */ + +LOCAL(void) +trim_right_edge (jpeg_transform_info *info, JDIMENSION full_width) +{ + JDIMENSION MCU_cols; + + MCU_cols = info->output_width / info->iMCU_sample_width; + if (MCU_cols > 0 && info->x_crop_offset + MCU_cols == + full_width / info->iMCU_sample_width) + info->output_width = MCU_cols * info->iMCU_sample_width; +} + +LOCAL(void) +trim_bottom_edge (jpeg_transform_info *info, JDIMENSION full_height) +{ + JDIMENSION MCU_rows; + + MCU_rows = info->output_height / info->iMCU_sample_height; + if (MCU_rows > 0 && info->y_crop_offset + MCU_rows == + full_height / info->iMCU_sample_height) + info->output_height = MCU_rows * info->iMCU_sample_height; +} + + +/* Request any required workspace. + * + * This routine figures out the size that the output image will be + * (which implies that all the transform parameters must be set before + * it is called). + * + * We allocate the workspace virtual arrays from the source decompression + * object, so that all the arrays (both the original data and the workspace) + * will be taken into account while making memory management decisions. + * Hence, this routine must be called after jpeg_read_header (which reads + * the image dimensions) and before jpeg_read_coefficients (which realizes + * the source's virtual arrays). + * + * This function returns FALSE right away if -perfect is given + * and transformation is not perfect. Otherwise returns TRUE. + */ + +GLOBAL(boolean) +jtransform_request_workspace (j_decompress_ptr srcinfo, + jpeg_transform_info *info) +{ + jvirt_barray_ptr *coef_arrays; + boolean need_workspace, transpose_it; + jpeg_component_info *compptr; + JDIMENSION xoffset, yoffset; + JDIMENSION width_in_iMCUs, height_in_iMCUs; + JDIMENSION width_in_blocks, height_in_blocks; + int ci, h_samp_factor, v_samp_factor; + + /* Determine number of components in output image */ + if (info->force_grayscale && + (srcinfo->jpeg_color_space == JCS_YCbCr || + srcinfo->jpeg_color_space == JCS_BG_YCC) && + srcinfo->num_components == 3) + /* We'll only process the first component */ + info->num_components = 1; + else + /* Process all the components */ + info->num_components = srcinfo->num_components; + + /* Compute output image dimensions and related values. */ + jpeg_core_output_dimensions(srcinfo); + + /* Return right away if -perfect is given and transformation is not perfect. + */ + if (info->perfect) { + if (info->num_components == 1) { + if (!jtransform_perfect_transform(srcinfo->output_width, + srcinfo->output_height, + srcinfo->min_DCT_h_scaled_size, + srcinfo->min_DCT_v_scaled_size, + info->transform)) + return FALSE; + } else { + if (!jtransform_perfect_transform(srcinfo->output_width, + srcinfo->output_height, + srcinfo->max_h_samp_factor * srcinfo->min_DCT_h_scaled_size, + srcinfo->max_v_samp_factor * srcinfo->min_DCT_v_scaled_size, + info->transform)) + return FALSE; + } + } + + /* If there is only one output component, force the iMCU size to be 1; + * else use the source iMCU size. (This allows us to do the right thing + * when reducing color to grayscale, and also provides a handy way of + * cleaning up "funny" grayscale images whose sampling factors are not 1x1.) + */ + switch (info->transform) { + case JXFORM_TRANSPOSE: + case JXFORM_TRANSVERSE: + case JXFORM_ROT_90: + case JXFORM_ROT_270: + info->output_width = srcinfo->output_height; + info->output_height = srcinfo->output_width; + if (info->num_components == 1) { + info->iMCU_sample_width = srcinfo->min_DCT_v_scaled_size; + info->iMCU_sample_height = srcinfo->min_DCT_h_scaled_size; + } else { + info->iMCU_sample_width = + srcinfo->max_v_samp_factor * srcinfo->min_DCT_v_scaled_size; + info->iMCU_sample_height = + srcinfo->max_h_samp_factor * srcinfo->min_DCT_h_scaled_size; + } + break; + default: + info->output_width = srcinfo->output_width; + info->output_height = srcinfo->output_height; + if (info->num_components == 1) { + info->iMCU_sample_width = srcinfo->min_DCT_h_scaled_size; + info->iMCU_sample_height = srcinfo->min_DCT_v_scaled_size; + } else { + info->iMCU_sample_width = + srcinfo->max_h_samp_factor * srcinfo->min_DCT_h_scaled_size; + info->iMCU_sample_height = + srcinfo->max_v_samp_factor * srcinfo->min_DCT_v_scaled_size; + } + break; + } + + /* If cropping has been requested, compute the crop area's position and + * dimensions, ensuring that its upper left corner falls at an iMCU boundary. + */ + if (info->crop) { + /* Insert default values for unset crop parameters */ + if (info->crop_xoffset_set == JCROP_UNSET) + info->crop_xoffset = 0; /* default to +0 */ + if (info->crop_yoffset_set == JCROP_UNSET) + info->crop_yoffset = 0; /* default to +0 */ + if (info->crop_width_set == JCROP_UNSET) { + if (info->crop_xoffset >= info->output_width) + ERREXIT(srcinfo, JERR_BAD_CROP_SPEC); + info->crop_width = info->output_width - info->crop_xoffset; + } else { + /* Check for crop extension */ + if (info->crop_width > info->output_width) { + /* Crop extension does not work when transforming! */ + if (info->transform != JXFORM_NONE || + info->crop_xoffset >= info->crop_width || + info->crop_xoffset > info->crop_width - info->output_width) + ERREXIT(srcinfo, JERR_BAD_CROP_SPEC); + } else { + if (info->crop_xoffset >= info->output_width || + info->crop_width <= 0 || + info->crop_xoffset > info->output_width - info->crop_width) + ERREXIT(srcinfo, JERR_BAD_CROP_SPEC); + } + } + if (info->crop_height_set == JCROP_UNSET) { + if (info->crop_yoffset >= info->output_height) + ERREXIT(srcinfo, JERR_BAD_CROP_SPEC); + info->crop_height = info->output_height - info->crop_yoffset; + } else { + /* Check for crop extension */ + if (info->crop_height > info->output_height) { + /* Crop extension does not work when transforming! */ + if (info->transform != JXFORM_NONE || + info->crop_yoffset >= info->crop_height || + info->crop_yoffset > info->crop_height - info->output_height) + ERREXIT(srcinfo, JERR_BAD_CROP_SPEC); + } else { + if (info->crop_yoffset >= info->output_height || + info->crop_height <= 0 || + info->crop_yoffset > info->output_height - info->crop_height) + ERREXIT(srcinfo, JERR_BAD_CROP_SPEC); + } + } + /* Convert negative crop offsets into regular offsets */ + if (info->crop_xoffset_set != JCROP_NEG) + xoffset = info->crop_xoffset; + else if (info->crop_width > info->output_width) /* crop extension */ + xoffset = info->crop_width - info->output_width - info->crop_xoffset; + else + xoffset = info->output_width - info->crop_width - info->crop_xoffset; + if (info->crop_yoffset_set != JCROP_NEG) + yoffset = info->crop_yoffset; + else if (info->crop_height > info->output_height) /* crop extension */ + yoffset = info->crop_height - info->output_height - info->crop_yoffset; + else + yoffset = info->output_height - info->crop_height - info->crop_yoffset; + /* Now adjust so that upper left corner falls at an iMCU boundary */ + if (info->transform == JXFORM_WIPE) { + /* Ensure the effective wipe region will cover the requested */ + info->drop_width = (JDIMENSION) jdiv_round_up + ((long) (info->crop_width + (xoffset % info->iMCU_sample_width)), + (long) info->iMCU_sample_width); + info->drop_height = (JDIMENSION) jdiv_round_up + ((long) (info->crop_height + (yoffset % info->iMCU_sample_height)), + (long) info->iMCU_sample_height); + } else { + /* Ensure the effective crop region will cover the requested */ + if (info->crop_width_set == JCROP_FORCE || + info->crop_width > info->output_width) + info->output_width = info->crop_width; + else + info->output_width = + info->crop_width + (xoffset % info->iMCU_sample_width); + if (info->crop_height_set == JCROP_FORCE || + info->crop_height > info->output_height) + info->output_height = info->crop_height; + else + info->output_height = + info->crop_height + (yoffset % info->iMCU_sample_height); + } + /* Save x/y offsets measured in iMCUs */ + info->x_crop_offset = xoffset / info->iMCU_sample_width; + info->y_crop_offset = yoffset / info->iMCU_sample_height; + } else { + info->x_crop_offset = 0; + info->y_crop_offset = 0; + } + + /* Figure out whether we need workspace arrays, + * and if so whether they are transposed relative to the source. + */ + need_workspace = FALSE; + transpose_it = FALSE; + switch (info->transform) { + case JXFORM_NONE: + if (info->x_crop_offset != 0 || info->y_crop_offset != 0 || + info->output_width > srcinfo->output_width || + info->output_height > srcinfo->output_height) + need_workspace = TRUE; + /* No workspace needed if neither cropping nor transforming */ + break; + case JXFORM_FLIP_H: + if (info->trim) + trim_right_edge(info, srcinfo->output_width); + if (info->y_crop_offset != 0) + need_workspace = TRUE; + /* do_flip_h_no_crop doesn't need a workspace array */ + break; + case JXFORM_FLIP_V: + if (info->trim) + trim_bottom_edge(info, srcinfo->output_height); + /* Need workspace arrays having same dimensions as source image. */ + need_workspace = TRUE; + break; + case JXFORM_TRANSPOSE: + /* transpose does NOT have to trim anything */ + /* Need workspace arrays having transposed dimensions. */ + need_workspace = TRUE; + transpose_it = TRUE; + break; + case JXFORM_TRANSVERSE: + if (info->trim) { + trim_right_edge(info, srcinfo->output_height); + trim_bottom_edge(info, srcinfo->output_width); + } + /* Need workspace arrays having transposed dimensions. */ + need_workspace = TRUE; + transpose_it = TRUE; + break; + case JXFORM_ROT_90: + if (info->trim) + trim_right_edge(info, srcinfo->output_height); + /* Need workspace arrays having transposed dimensions. */ + need_workspace = TRUE; + transpose_it = TRUE; + break; + case JXFORM_ROT_180: + if (info->trim) { + trim_right_edge(info, srcinfo->output_width); + trim_bottom_edge(info, srcinfo->output_height); + } + /* Need workspace arrays having same dimensions as source image. */ + need_workspace = TRUE; + break; + case JXFORM_ROT_270: + if (info->trim) + trim_bottom_edge(info, srcinfo->output_width); + /* Need workspace arrays having transposed dimensions. */ + need_workspace = TRUE; + transpose_it = TRUE; + break; + case JXFORM_WIPE: + break; + } + + /* Allocate workspace if needed. + * Note that we allocate arrays padded out to the next iMCU boundary, + * so that transform routines need not worry about missing edge blocks. + */ + if (need_workspace) { + coef_arrays = (jvirt_barray_ptr *) + (*srcinfo->mem->alloc_small) ((j_common_ptr) srcinfo, JPOOL_IMAGE, + SIZEOF(jvirt_barray_ptr) * info->num_components); + width_in_iMCUs = (JDIMENSION) + jdiv_round_up((long) info->output_width, + (long) info->iMCU_sample_width); + height_in_iMCUs = (JDIMENSION) + jdiv_round_up((long) info->output_height, + (long) info->iMCU_sample_height); + for (ci = 0; ci < info->num_components; ci++) { + compptr = srcinfo->comp_info + ci; + if (info->num_components == 1) { + /* we're going to force samp factors to 1x1 in this case */ + h_samp_factor = v_samp_factor = 1; + } else if (transpose_it) { + h_samp_factor = compptr->v_samp_factor; + v_samp_factor = compptr->h_samp_factor; + } else { + h_samp_factor = compptr->h_samp_factor; + v_samp_factor = compptr->v_samp_factor; + } + width_in_blocks = width_in_iMCUs * h_samp_factor; + height_in_blocks = height_in_iMCUs * v_samp_factor; + coef_arrays[ci] = (*srcinfo->mem->request_virt_barray) + ((j_common_ptr) srcinfo, JPOOL_IMAGE, FALSE, + width_in_blocks, height_in_blocks, (JDIMENSION) v_samp_factor); + } + info->workspace_coef_arrays = coef_arrays; + } else + info->workspace_coef_arrays = NULL; + + return TRUE; +} + + +/* Transpose destination image parameters */ + +LOCAL(void) +transpose_critical_parameters (j_compress_ptr dstinfo) +{ + int tblno, i, j, ci, itemp; + jpeg_component_info *compptr; + JQUANT_TBL *qtblptr; + JDIMENSION jtemp; + UINT16 qtemp; + + /* Transpose image dimensions */ + jtemp = dstinfo->image_width; + dstinfo->image_width = dstinfo->image_height; + dstinfo->image_height = jtemp; + itemp = dstinfo->min_DCT_h_scaled_size; + dstinfo->min_DCT_h_scaled_size = dstinfo->min_DCT_v_scaled_size; + dstinfo->min_DCT_v_scaled_size = itemp; + + /* Transpose sampling factors */ + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + itemp = compptr->h_samp_factor; + compptr->h_samp_factor = compptr->v_samp_factor; + compptr->v_samp_factor = itemp; + } + + /* Transpose quantization tables */ + for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) { + qtblptr = dstinfo->quant_tbl_ptrs[tblno]; + if (qtblptr != NULL) { + for (i = 0; i < DCTSIZE; i++) { + for (j = 0; j < i; j++) { + qtemp = qtblptr->quantval[i*DCTSIZE+j]; + qtblptr->quantval[i*DCTSIZE+j] = qtblptr->quantval[j*DCTSIZE+i]; + qtblptr->quantval[j*DCTSIZE+i] = qtemp; + } + } + } + } +} + + +/* Adjust Exif image parameters. + * + * We try to adjust the Tags ExifImageWidth and ExifImageHeight if possible. + */ + +LOCAL(void) +adjust_exif_parameters (JOCTET FAR * data, unsigned int length, + JDIMENSION new_width, JDIMENSION new_height) +{ + boolean is_motorola; /* Flag for byte order */ + unsigned int number_of_tags, tagnum; + unsigned int firstoffset, offset; + JDIMENSION new_value; + + if (length < 12) return; /* Length of an IFD entry */ + + /* Discover byte order */ + if (GETJOCTET(data[0]) == 0x49 && GETJOCTET(data[1]) == 0x49) + is_motorola = FALSE; + else if (GETJOCTET(data[0]) == 0x4D && GETJOCTET(data[1]) == 0x4D) + is_motorola = TRUE; + else + return; + + /* Check Tag Mark */ + if (is_motorola) { + if (GETJOCTET(data[2]) != 0) return; + if (GETJOCTET(data[3]) != 0x2A) return; + } else { + if (GETJOCTET(data[3]) != 0) return; + if (GETJOCTET(data[2]) != 0x2A) return; + } + + /* Get first IFD offset (offset to IFD0) */ + if (is_motorola) { + if (GETJOCTET(data[4]) != 0) return; + if (GETJOCTET(data[5]) != 0) return; + firstoffset = GETJOCTET(data[6]); + firstoffset <<= 8; + firstoffset += GETJOCTET(data[7]); + } else { + if (GETJOCTET(data[7]) != 0) return; + if (GETJOCTET(data[6]) != 0) return; + firstoffset = GETJOCTET(data[5]); + firstoffset <<= 8; + firstoffset += GETJOCTET(data[4]); + } + if (firstoffset > length - 2) return; /* check end of data segment */ + + /* Get the number of directory entries contained in this IFD */ + if (is_motorola) { + number_of_tags = GETJOCTET(data[firstoffset]); + number_of_tags <<= 8; + number_of_tags += GETJOCTET(data[firstoffset+1]); + } else { + number_of_tags = GETJOCTET(data[firstoffset+1]); + number_of_tags <<= 8; + number_of_tags += GETJOCTET(data[firstoffset]); + } + if (number_of_tags == 0) return; + firstoffset += 2; + + /* Search for ExifSubIFD offset Tag in IFD0 */ + for (;;) { + if (firstoffset > length - 12) return; /* check end of data segment */ + /* Get Tag number */ + if (is_motorola) { + tagnum = GETJOCTET(data[firstoffset]); + tagnum <<= 8; + tagnum += GETJOCTET(data[firstoffset+1]); + } else { + tagnum = GETJOCTET(data[firstoffset+1]); + tagnum <<= 8; + tagnum += GETJOCTET(data[firstoffset]); + } + if (tagnum == 0x8769) break; /* found ExifSubIFD offset Tag */ + if (--number_of_tags == 0) return; + firstoffset += 12; + } + + /* Get the ExifSubIFD offset */ + if (is_motorola) { + if (GETJOCTET(data[firstoffset+8]) != 0) return; + if (GETJOCTET(data[firstoffset+9]) != 0) return; + offset = GETJOCTET(data[firstoffset+10]); + offset <<= 8; + offset += GETJOCTET(data[firstoffset+11]); + } else { + if (GETJOCTET(data[firstoffset+11]) != 0) return; + if (GETJOCTET(data[firstoffset+10]) != 0) return; + offset = GETJOCTET(data[firstoffset+9]); + offset <<= 8; + offset += GETJOCTET(data[firstoffset+8]); + } + if (offset > length - 2) return; /* check end of data segment */ + + /* Get the number of directory entries contained in this SubIFD */ + if (is_motorola) { + number_of_tags = GETJOCTET(data[offset]); + number_of_tags <<= 8; + number_of_tags += GETJOCTET(data[offset+1]); + } else { + number_of_tags = GETJOCTET(data[offset+1]); + number_of_tags <<= 8; + number_of_tags += GETJOCTET(data[offset]); + } + if (number_of_tags < 2) return; + offset += 2; + + /* Search for ExifImageWidth and ExifImageHeight Tags in this SubIFD */ + do { + if (offset > length - 12) return; /* check end of data segment */ + /* Get Tag number */ + if (is_motorola) { + tagnum = GETJOCTET(data[offset]); + tagnum <<= 8; + tagnum += GETJOCTET(data[offset+1]); + } else { + tagnum = GETJOCTET(data[offset+1]); + tagnum <<= 8; + tagnum += GETJOCTET(data[offset]); + } + if (tagnum == 0xA002 || tagnum == 0xA003) { + if (tagnum == 0xA002) + new_value = new_width; /* ExifImageWidth Tag */ + else + new_value = new_height; /* ExifImageHeight Tag */ + if (is_motorola) { + data[offset+2] = 0; /* Format = unsigned long (4 octets) */ + data[offset+3] = 4; + data[offset+4] = 0; /* Number Of Components = 1 */ + data[offset+5] = 0; + data[offset+6] = 0; + data[offset+7] = 1; + data[offset+8] = 0; + data[offset+9] = 0; + data[offset+10] = (JOCTET)((new_value >> 8) & 0xFF); + data[offset+11] = (JOCTET)(new_value & 0xFF); + } else { + data[offset+2] = 4; /* Format = unsigned long (4 octets) */ + data[offset+3] = 0; + data[offset+4] = 1; /* Number Of Components = 1 */ + data[offset+5] = 0; + data[offset+6] = 0; + data[offset+7] = 0; + data[offset+8] = (JOCTET)(new_value & 0xFF); + data[offset+9] = (JOCTET)((new_value >> 8) & 0xFF); + data[offset+10] = 0; + data[offset+11] = 0; + } + } + offset += 12; + } while (--number_of_tags); +} + + +/* Adjust output image parameters as needed. + * + * This must be called after jpeg_copy_critical_parameters() + * and before jpeg_write_coefficients(). + * + * The return value is the set of virtual coefficient arrays to be written + * (either the ones allocated by jtransform_request_workspace, or the + * original source data arrays). The caller will need to pass this value + * to jpeg_write_coefficients(). + */ + +GLOBAL(jvirt_barray_ptr *) +jtransform_adjust_parameters (j_decompress_ptr srcinfo, + j_compress_ptr dstinfo, + jvirt_barray_ptr *src_coef_arrays, + jpeg_transform_info *info) +{ + /* If force-to-grayscale is requested, adjust destination parameters */ + if (info->force_grayscale) { + /* First, ensure we have YCC or grayscale data, and that the source's + * Y channel is full resolution. (No reasonable person would make Y + * be less than full resolution, so actually coping with that case + * isn't worth extra code space. But we check it to avoid crashing.) + */ + if ((((dstinfo->jpeg_color_space == JCS_YCbCr || + dstinfo->jpeg_color_space == JCS_BG_YCC) && + dstinfo->num_components == 3) || + (dstinfo->jpeg_color_space == JCS_GRAYSCALE && + dstinfo->num_components == 1)) && + srcinfo->comp_info[0].h_samp_factor == srcinfo->max_h_samp_factor && + srcinfo->comp_info[0].v_samp_factor == srcinfo->max_v_samp_factor) { + /* We use jpeg_set_colorspace to make sure subsidiary settings get fixed + * properly. Among other things, it sets the target h_samp_factor & + * v_samp_factor to 1, which typically won't match the source. + * We have to preserve the source's quantization table number, however. + */ + int sv_quant_tbl_no = dstinfo->comp_info[0].quant_tbl_no; + jpeg_set_colorspace(dstinfo, JCS_GRAYSCALE); + dstinfo->comp_info[0].quant_tbl_no = sv_quant_tbl_no; + } else { + /* Sorry, can't do it */ + ERREXIT(dstinfo, JERR_CONVERSION_NOTIMPL); + } + } else if (info->num_components == 1) { + /* For a single-component source, we force the destination sampling factors + * to 1x1, with or without force_grayscale. This is useful because some + * decoders choke on grayscale images with other sampling factors. + */ + dstinfo->comp_info[0].h_samp_factor = 1; + dstinfo->comp_info[0].v_samp_factor = 1; + } + + /* Correct the destination's image dimensions as necessary + * for rotate/flip, resize, and crop operations. + */ + dstinfo->jpeg_width = info->output_width; + dstinfo->jpeg_height = info->output_height; + + /* Transpose destination image parameters */ + switch (info->transform) { + case JXFORM_TRANSPOSE: + case JXFORM_TRANSVERSE: + case JXFORM_ROT_90: + case JXFORM_ROT_270: + transpose_critical_parameters(dstinfo); + break; + default: + break; + } + + /* Adjust Exif properties */ + if (srcinfo->marker_list != NULL && + srcinfo->marker_list->marker == JPEG_APP0+1 && + srcinfo->marker_list->data_length >= 6 && + GETJOCTET(srcinfo->marker_list->data[0]) == 0x45 && + GETJOCTET(srcinfo->marker_list->data[1]) == 0x78 && + GETJOCTET(srcinfo->marker_list->data[2]) == 0x69 && + GETJOCTET(srcinfo->marker_list->data[3]) == 0x66 && + GETJOCTET(srcinfo->marker_list->data[4]) == 0 && + GETJOCTET(srcinfo->marker_list->data[5]) == 0) { + /* Suppress output of JFIF marker */ + dstinfo->write_JFIF_header = FALSE; + /* Adjust Exif image parameters */ + if (dstinfo->jpeg_width != srcinfo->image_width || + dstinfo->jpeg_height != srcinfo->image_height) + /* Align data segment to start of TIFF structure for parsing */ + adjust_exif_parameters(srcinfo->marker_list->data + 6, + srcinfo->marker_list->data_length - 6, + dstinfo->jpeg_width, dstinfo->jpeg_height); + } + + /* Return the appropriate output data set */ + if (info->workspace_coef_arrays != NULL) + return info->workspace_coef_arrays; + return src_coef_arrays; +} + + +/* Execute the actual transformation, if any. + * + * This must be called *after* jpeg_write_coefficients, because it depends + * on jpeg_write_coefficients to have computed subsidiary values such as + * the per-component width and height fields in the destination object. + * + * Note that some transformations will modify the source data arrays! + */ + +GLOBAL(void) +jtransform_execute_transform (j_decompress_ptr srcinfo, + j_compress_ptr dstinfo, + jvirt_barray_ptr *src_coef_arrays, + jpeg_transform_info *info) +{ + jvirt_barray_ptr *dst_coef_arrays = info->workspace_coef_arrays; + + /* Note: conditions tested here should match those in switch statement + * in jtransform_request_workspace() + */ + switch (info->transform) { + case JXFORM_NONE: + if (info->output_width > srcinfo->output_width || + info->output_height > srcinfo->output_height) + do_crop_ext(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + else if (info->x_crop_offset != 0 || info->y_crop_offset != 0) + do_crop(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + break; + case JXFORM_FLIP_H: + if (info->y_crop_offset != 0) + do_flip_h(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + else + do_flip_h_no_crop(srcinfo, dstinfo, info->x_crop_offset, + src_coef_arrays); + break; + case JXFORM_FLIP_V: + do_flip_v(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + break; + case JXFORM_TRANSPOSE: + do_transpose(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + break; + case JXFORM_TRANSVERSE: + do_transverse(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + break; + case JXFORM_ROT_90: + do_rot_90(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + break; + case JXFORM_ROT_180: + do_rot_180(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + break; + case JXFORM_ROT_270: + do_rot_270(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + break; + case JXFORM_WIPE: + do_wipe(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, info->drop_width, info->drop_height); + break; + } +} + +/* jtransform_perfect_transform + * + * Determine whether lossless transformation is perfectly + * possible for a specified image and transformation. + * + * Inputs: + * image_width, image_height: source image dimensions. + * MCU_width, MCU_height: pixel dimensions of MCU. + * transform: transformation identifier. + * Parameter sources from initialized jpeg_struct + * (after reading source header): + * image_width = cinfo.image_width + * image_height = cinfo.image_height + * MCU_width = cinfo.max_h_samp_factor * cinfo.block_size + * MCU_height = cinfo.max_v_samp_factor * cinfo.block_size + * Result: + * TRUE = perfect transformation possible + * FALSE = perfect transformation not possible + * (may use custom action then) + */ + +GLOBAL(boolean) +jtransform_perfect_transform(JDIMENSION image_width, JDIMENSION image_height, + int MCU_width, int MCU_height, + JXFORM_CODE transform) +{ + boolean result = TRUE; /* initialize TRUE */ + + switch (transform) { + case JXFORM_FLIP_H: + case JXFORM_ROT_270: + if (image_width % (JDIMENSION) MCU_width) + result = FALSE; + break; + case JXFORM_FLIP_V: + case JXFORM_ROT_90: + if (image_height % (JDIMENSION) MCU_height) + result = FALSE; + break; + case JXFORM_TRANSVERSE: + case JXFORM_ROT_180: + if (image_width % (JDIMENSION) MCU_width) + result = FALSE; + if (image_height % (JDIMENSION) MCU_height) + result = FALSE; + break; + default: + break; + } + + return result; +} + +#endif /* TRANSFORMS_SUPPORTED */ + + +/* Setup decompression object to save desired markers in memory. + * This must be called before jpeg_read_header() to have the desired effect. + */ + +GLOBAL(void) +jcopy_markers_setup (j_decompress_ptr srcinfo, JCOPY_OPTION option) +{ +#ifdef SAVE_MARKERS_SUPPORTED + int m; + + /* Save comments except under NONE option */ + if (option != JCOPYOPT_NONE) { + jpeg_save_markers(srcinfo, JPEG_COM, 0xFFFF); + } + /* Save all types of APPn markers iff ALL option */ + if (option == JCOPYOPT_ALL) { + for (m = 0; m < 16; m++) + jpeg_save_markers(srcinfo, JPEG_APP0 + m, 0xFFFF); + } +#endif /* SAVE_MARKERS_SUPPORTED */ +} + +/* Copy markers saved in the given source object to the destination object. + * This should be called just after jpeg_start_compress() or + * jpeg_write_coefficients(). + * Note that those routines will have written the SOI, and also the + * JFIF APP0 or Adobe APP14 markers if selected. + */ + +GLOBAL(void) +jcopy_markers_execute (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JCOPY_OPTION option) +{ + jpeg_saved_marker_ptr marker; + + /* In the current implementation, we don't actually need to examine the + * option flag here; we just copy everything that got saved. + * But to avoid confusion, we do not output JFIF and Adobe APP14 markers + * if the encoder library already wrote one. + */ + for (marker = srcinfo->marker_list; marker != NULL; marker = marker->next) { + if (dstinfo->write_JFIF_header && + marker->marker == JPEG_APP0 && + marker->data_length >= 5 && + GETJOCTET(marker->data[0]) == 0x4A && + GETJOCTET(marker->data[1]) == 0x46 && + GETJOCTET(marker->data[2]) == 0x49 && + GETJOCTET(marker->data[3]) == 0x46 && + GETJOCTET(marker->data[4]) == 0) + continue; /* reject duplicate JFIF */ + if (dstinfo->write_Adobe_marker && + marker->marker == JPEG_APP0+14 && + marker->data_length >= 5 && + GETJOCTET(marker->data[0]) == 0x41 && + GETJOCTET(marker->data[1]) == 0x64 && + GETJOCTET(marker->data[2]) == 0x6F && + GETJOCTET(marker->data[3]) == 0x62 && + GETJOCTET(marker->data[4]) == 0x65) + continue; /* reject duplicate Adobe */ +#ifdef NEED_FAR_POINTERS + /* We could use jpeg_write_marker if the data weren't FAR... */ + { + unsigned int i; + jpeg_write_m_header(dstinfo, marker->marker, marker->data_length); + for (i = 0; i < marker->data_length; i++) + jpeg_write_m_byte(dstinfo, marker->data[i]); + } +#else + jpeg_write_marker(dstinfo, marker->marker, + marker->data, marker->data_length); +#endif + } +} diff --git a/compat/libjpeg/transupp.h b/compat/libjpeg/transupp.h new file mode 100755 index 0000000..28a1a9c --- /dev/null +++ b/compat/libjpeg/transupp.h @@ -0,0 +1,219 @@ +/* + * transupp.h + * + * Copyright (C) 1997-2013, Thomas G. Lane, Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains declarations for image transformation routines and + * other utility code used by the jpegtran sample application. These are + * NOT part of the core JPEG library. But we keep these routines separate + * from jpegtran.c to ease the task of maintaining jpegtran-like programs + * that have other user interfaces. + * + * NOTE: all the routines declared here have very specific requirements + * about when they are to be executed during the reading and writing of the + * source and destination files. See the comments in transupp.c, or see + * jpegtran.c for an example of correct usage. + */ + +/* If you happen not to want the image transform support, disable it here */ +#ifndef TRANSFORMS_SUPPORTED +#define TRANSFORMS_SUPPORTED 1 /* 0 disables transform code */ +#endif + +/* + * Although rotating and flipping data expressed as DCT coefficients is not + * hard, there is an asymmetry in the JPEG format specification for images + * whose dimensions aren't multiples of the iMCU size. The right and bottom + * image edges are padded out to the next iMCU boundary with junk data; but + * no padding is possible at the top and left edges. If we were to flip + * the whole image including the pad data, then pad garbage would become + * visible at the top and/or left, and real pixels would disappear into the + * pad margins --- perhaps permanently, since encoders & decoders may not + * bother to preserve DCT blocks that appear to be completely outside the + * nominal image area. So, we have to exclude any partial iMCUs from the + * basic transformation. + * + * Transpose is the only transformation that can handle partial iMCUs at the + * right and bottom edges completely cleanly. flip_h can flip partial iMCUs + * at the bottom, but leaves any partial iMCUs at the right edge untouched. + * Similarly flip_v leaves any partial iMCUs at the bottom edge untouched. + * The other transforms are defined as combinations of these basic transforms + * and process edge blocks in a way that preserves the equivalence. + * + * The "trim" option causes untransformable partial iMCUs to be dropped; + * this is not strictly lossless, but it usually gives the best-looking + * result for odd-size images. Note that when this option is active, + * the expected mathematical equivalences between the transforms may not hold. + * (For example, -rot 270 -trim trims only the bottom edge, but -rot 90 -trim + * followed by -rot 180 -trim trims both edges.) + * + * We also offer a lossless-crop option, which discards data outside a given + * image region but losslessly preserves what is inside. Like the rotate and + * flip transforms, lossless crop is restricted by the current JPEG format: the + * upper left corner of the selected region must fall on an iMCU boundary. If + * this does not hold for the given crop parameters, we silently move the upper + * left corner up and/or left to make it so, simultaneously increasing the + * region dimensions to keep the lower right crop corner unchanged. (Thus, the + * output image covers at least the requested region, but may cover more.) + * The adjustment of the region dimensions may be optionally disabled. + * + * A complementary lossless-wipe option is provided to discard (gray out) data + * inside a given image region while losslessly preserving what is outside. + * + * We also provide a lossless-resize option, which is kind of a lossless-crop + * operation in the DCT coefficient block domain - it discards higher-order + * coefficients and losslessly preserves lower-order coefficients of a + * sub-block. + * + * Rotate/flip transform, resize, and crop can be requested together in a + * single invocation. The crop is applied last --- that is, the crop region + * is specified in terms of the destination image after transform/resize. + * + * We also offer a "force to grayscale" option, which simply discards the + * chrominance channels of a YCbCr image. This is lossless in the sense that + * the luminance channel is preserved exactly. It's not the same kind of + * thing as the rotate/flip transformations, but it's convenient to handle it + * as part of this package, mainly because the transformation routines have to + * be aware of the option to know how many components to work on. + */ + + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jtransform_parse_crop_spec jTrParCrop +#define jtransform_request_workspace jTrRequest +#define jtransform_adjust_parameters jTrAdjust +#define jtransform_execute_transform jTrExec +#define jtransform_perfect_transform jTrPerfect +#define jcopy_markers_setup jCMrkSetup +#define jcopy_markers_execute jCMrkExec +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + + +/* + * Codes for supported types of image transformations. + */ + +typedef enum { + JXFORM_NONE, /* no transformation */ + JXFORM_FLIP_H, /* horizontal flip */ + JXFORM_FLIP_V, /* vertical flip */ + JXFORM_TRANSPOSE, /* transpose across UL-to-LR axis */ + JXFORM_TRANSVERSE, /* transpose across UR-to-LL axis */ + JXFORM_ROT_90, /* 90-degree clockwise rotation */ + JXFORM_ROT_180, /* 180-degree rotation */ + JXFORM_ROT_270, /* 270-degree clockwise (or 90 ccw) */ + JXFORM_WIPE /* wipe */ +} JXFORM_CODE; + +/* + * Codes for crop parameters, which can individually be unspecified, + * positive or negative for xoffset or yoffset, + * positive or forced for width or height. + */ + +typedef enum { + JCROP_UNSET, + JCROP_POS, + JCROP_NEG, + JCROP_FORCE +} JCROP_CODE; + +/* + * Transform parameters struct. + * NB: application must not change any elements of this struct after + * calling jtransform_request_workspace. + */ + +typedef struct { + /* Options: set by caller */ + JXFORM_CODE transform; /* image transform operator */ + boolean perfect; /* if TRUE, fail if partial MCUs are requested */ + boolean trim; /* if TRUE, trim partial MCUs as needed */ + boolean force_grayscale; /* if TRUE, convert color image to grayscale */ + boolean crop; /* if TRUE, crop or wipe source image */ + + /* Crop parameters: application need not set these unless crop is TRUE. + * These can be filled in by jtransform_parse_crop_spec(). + */ + JDIMENSION crop_width; /* Width of selected region */ + JCROP_CODE crop_width_set; /* (forced disables adjustment) */ + JDIMENSION crop_height; /* Height of selected region */ + JCROP_CODE crop_height_set; /* (forced disables adjustment) */ + JDIMENSION crop_xoffset; /* X offset of selected region */ + JCROP_CODE crop_xoffset_set; /* (negative measures from right edge) */ + JDIMENSION crop_yoffset; /* Y offset of selected region */ + JCROP_CODE crop_yoffset_set; /* (negative measures from bottom edge) */ + + /* Internal workspace: caller should not touch these */ + int num_components; /* # of components in workspace */ + jvirt_barray_ptr * workspace_coef_arrays; /* workspace for transformations */ + JDIMENSION output_width; /* cropped destination dimensions */ + JDIMENSION output_height; + JDIMENSION x_crop_offset; /* destination crop offsets measured in iMCUs */ + JDIMENSION y_crop_offset; + JDIMENSION drop_width; /* drop/wipe dimensions measured in iMCUs */ + JDIMENSION drop_height; + int iMCU_sample_width; /* destination iMCU size */ + int iMCU_sample_height; +} jpeg_transform_info; + + +#if TRANSFORMS_SUPPORTED + +/* Parse a crop specification (written in X11 geometry style) */ +EXTERN(boolean) jtransform_parse_crop_spec + JPP((jpeg_transform_info *info, const char *spec)); +/* Request any required workspace */ +EXTERN(boolean) jtransform_request_workspace + JPP((j_decompress_ptr srcinfo, jpeg_transform_info *info)); +/* Adjust output image parameters */ +EXTERN(jvirt_barray_ptr *) jtransform_adjust_parameters + JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + jvirt_barray_ptr *src_coef_arrays, + jpeg_transform_info *info)); +/* Execute the actual transformation, if any */ +EXTERN(void) jtransform_execute_transform + JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + jvirt_barray_ptr *src_coef_arrays, + jpeg_transform_info *info)); +/* Determine whether lossless transformation is perfectly + * possible for a specified image and transformation. + */ +EXTERN(boolean) jtransform_perfect_transform + JPP((JDIMENSION image_width, JDIMENSION image_height, + int MCU_width, int MCU_height, + JXFORM_CODE transform)); + +/* jtransform_execute_transform used to be called + * jtransform_execute_transformation, but some compilers complain about + * routine names that long. This macro is here to avoid breaking any + * old source code that uses the original name... + */ +#define jtransform_execute_transformation jtransform_execute_transform + +#endif /* TRANSFORMS_SUPPORTED */ + + +/* + * Support for copying optional markers from source to destination file. + */ + +typedef enum { + JCOPYOPT_NONE, /* copy no optional markers */ + JCOPYOPT_COMMENTS, /* copy only comment (COM) markers */ + JCOPYOPT_ALL /* copy all optional markers */ +} JCOPY_OPTION; + +#define JCOPYOPT_DEFAULT JCOPYOPT_COMMENTS /* recommended default */ + +/* Setup decompression object to save desired markers in memory */ +EXTERN(void) jcopy_markers_setup + JPP((j_decompress_ptr srcinfo, JCOPY_OPTION option)); +/* Copy markers saved in the given source object to the destination object */ +EXTERN(void) jcopy_markers_execute + JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JCOPY_OPTION option)); diff --git a/compat/libjpeg/usage.txt b/compat/libjpeg/usage.txt new file mode 100755 index 0000000..fc3aafb --- /dev/null +++ b/compat/libjpeg/usage.txt @@ -0,0 +1,687 @@ +USAGE instructions for the Independent JPEG Group's JPEG software +================================================================= + +This file describes usage of the JPEG conversion programs cjpeg and djpeg, +as well as the utility programs jpegtran, rdjpgcom and wrjpgcom. (See +the other documentation files if you wish to use the JPEG library within +your own programs.) + +If you are on a Unix machine you may prefer to read the Unix-style manual +pages in files cjpeg.1, djpeg.1, jpegtran.1, rdjpgcom.1, wrjpgcom.1. + + +INTRODUCTION + +These programs implement JPEG image encoding, decoding, and transcoding. +JPEG (pronounced "jay-peg") is a standardized compression method for +full-color and grayscale images. + + +GENERAL USAGE + +We provide two programs, cjpeg to compress an image file into JPEG format, +and djpeg to decompress a JPEG file back into a conventional image format. + +On Unix-like systems, you say: + cjpeg [switches] [imagefile] >jpegfile +or + djpeg [switches] [jpegfile] >imagefile +The programs read the specified input file, or standard input if none is +named. They always write to standard output (with trace/error messages to +standard error). These conventions are handy for piping images between +programs. + +On most non-Unix systems, you say: + cjpeg [switches] imagefile jpegfile +or + djpeg [switches] jpegfile imagefile +i.e., both the input and output files are named on the command line. This +style is a little more foolproof, and it loses no functionality if you don't +have pipes. (You can get this style on Unix too, if you prefer, by defining +TWO_FILE_COMMANDLINE when you compile the programs; see install.txt.) + +You can also say: + cjpeg [switches] -outfile jpegfile imagefile +or + djpeg [switches] -outfile imagefile jpegfile +This syntax works on all systems, so it is useful for scripts. + +The currently supported image file formats are: PPM (PBMPLUS color format), +PGM (PBMPLUS grayscale format), BMP, Targa, and RLE (Utah Raster Toolkit +format). (RLE is supported only if the URT library is available, which it +isn't on most non-Unix systems.) cjpeg recognizes the input image format +automatically, with the exception of some Targa-format files. You have to +tell djpeg which format to generate. + +JPEG files are in the standard JFIF file format. There are other, +less widely used JPEG-based file formats, but we don't support them. + +All switch names may be abbreviated; for example, -grayscale may be written +-gray or -gr. Most of the "basic" switches can be abbreviated to as little as +one letter. Upper and lower case are equivalent (-BMP is the same as -bmp). +British spellings are also accepted (e.g., -greyscale), though for brevity +these are not mentioned below. + + +CJPEG DETAILS + +The basic command line switches for cjpeg are: + + -quality N[,...] Scale quantization tables to adjust image quality. + Quality is 0 (worst) to 100 (best); default is 75. + (See below for more info.) + + -grayscale Create monochrome JPEG file from color input. + Be sure to use this switch when compressing a grayscale + BMP file, because cjpeg isn't bright enough to notice + whether a BMP file uses only shades of gray. By + saying -grayscale, you'll get a smaller JPEG file that + takes less time to process. + + -rgb Create RGB JPEG file. + Using this switch suppresses the conversion from RGB + colorspace input to the default YCbCr JPEG colorspace. + You can use this switch in combination with the + -block N switch (see below) for lossless JPEG coding. + See also the -rgb1 switch below. + + -optimize Perform optimization of entropy encoding parameters. + Without this, default encoding parameters are used. + -optimize usually makes the JPEG file a little smaller, + but cjpeg runs somewhat slower and needs much more + memory. Image quality and speed of decompression are + unaffected by -optimize. + + -progressive Create progressive JPEG file (see below). + + -scale M/N Scale the output image by a factor M/N. Currently + supported scale factors are M/N with all N from 1 to + 16, where M is the destination DCT size, which is 8 by + default (see -block N switch below). + + -targa Input file is Targa format. Targa files that contain + an "identification" field will not be automatically + recognized by cjpeg; for such files you must specify + -targa to make cjpeg treat the input as Targa format. + For most Targa files, you won't need this switch. + +The -quality switch lets you trade off compressed file size against quality of +the reconstructed image: the higher the quality setting, the larger the JPEG +file, and the closer the output image will be to the original input. Normally +you want to use the lowest quality setting (smallest file) that decompresses +into something visually indistinguishable from the original image. For this +purpose the quality setting should be between 50 and 95; the default of 75 is +often about right. If you see defects at -quality 75, then go up 5 or 10 +counts at a time until you are happy with the output image. (The optimal +setting will vary from one image to another.) + +-quality 100 will generate a quantization table of all 1's, minimizing loss +in the quantization step (but there is still information loss in subsampling, +as well as roundoff error). This setting is mainly of interest for +experimental purposes. Quality values above about 95 are NOT recommended for +normal use; the compressed file size goes up dramatically for hardly any gain +in output image quality. + +In the other direction, quality values below 50 will produce very small files +of low image quality. Settings around 5 to 10 might be useful in preparing an +index of a large image library, for example. Try -quality 2 (or so) for some +amusing Cubist effects. (Note: quality values below about 25 generate 2-byte +quantization tables, which are considered optional in the JPEG standard. +cjpeg emits a warning message when you give such a quality value, because some +other JPEG programs may be unable to decode the resulting file. Use -baseline +if you need to ensure compatibility at low quality values.) + +The -quality option has been extended in IJG version 7 for support of separate +quality settings for luminance and chrominance (or in general, for every +provided quantization table slot). This feature is useful for high-quality +applications which cannot accept the damage of color data by coarse +subsampling settings. You can now easily reduce the color data amount more +smoothly with finer control without separate subsampling. The resulting file +is fully compliant with standard JPEG decoders. +Note that the -quality ratings refer to the quantization table slots, and that +the last value is replicated if there are more q-table slots than parameters. +The default q-table slots are 0 for luminance and 1 for chrominance with +default tables as given in the JPEG standard. This is compatible with the old +behaviour in case that only one parameter is given, which is then used for +both luminance and chrominance (slots 0 and 1). More or custom quantization +tables can be set with -qtables and assigned to components with -qslots +parameter (see the "wizard" switches below). +CAUTION: You must explicitly add -sample 1x1 for efficient separate color +quality selection, since the default value used by library is 2x2! + +The -progressive switch creates a "progressive JPEG" file. In this type of +JPEG file, the data is stored in multiple scans of increasing quality. If the +file is being transmitted over a slow communications link, the decoder can use +the first scan to display a low-quality image very quickly, and can then +improve the display with each subsequent scan. The final image is exactly +equivalent to a standard JPEG file of the same quality setting, and the total +file size is about the same --- often a little smaller. + +Switches for advanced users: + + -arithmetic Use arithmetic coding. + CAUTION: arithmetic coded JPEG is not yet widely + implemented, so many decoders will be unable to + view an arithmetic coded JPEG file at all. + + -block N Set DCT block size. All N from 1 to 16 are possible. + Default is 8 (baseline format). + Larger values produce higher compression, + smaller values produce higher quality + (exact DCT stage possible with 1 or 2; with the + default quality of 75 and default Luminance qtable + the DCT+Quantization stage is lossless for N=1). + CAUTION: An implementation of the JPEG SmartScale + extension is required for this feature. SmartScale + enabled JPEG is not yet widely implemented, so many + decoders will be unable to view a SmartScale extended + JPEG file at all. + + -rgb1 Create RGB JPEG file with reversible color transform. + Works like the -rgb switch (see above) and inserts a + simple reversible color transform into the processing + which significantly improves the compression. + Use this switch in combination with the -block N + switch (see above) for lossless JPEG coding. + CAUTION: A decoder with inverse color transform + support is required for this feature. Reversible + color transform support is not yet widely implemented, + so many decoders will be unable to view a reversible + color transformed JPEG file at all. + + -bgycc Create big gamut YCC JPEG file. + In this type of encoding the color difference + components are quantized further by a factor of 2 + compared to the normal Cb/Cr values, thus creating + space to allow larger color values with higher + saturation than the normal gamut limits to be encoded. + In order to compensate for the loss of color fidelity + compared to a normal YCC encoded file, the color + quantization tables can be adjusted accordingly. + For example, cjpeg -bgycc -quality 80,90 will give + similar results as cjpeg -quality 80. + CAUTION: For correct decompression a decoder with big + gamut YCC support (JFIF version 2) is required. + An old decoder may or may not display a big gamut YCC + encoded JPEG file, depending on JFIF version check + and corresponding warning/error configuration. + In case of a granted decompression the old decoder + will display the image with half saturated colors. + + -dct int Use integer DCT method (default). + -dct fast Use fast integer DCT (less accurate). + -dct float Use floating-point DCT method. + The float method is very slightly more accurate than + the int method, but is much slower unless your machine + has very fast floating-point hardware. Also note that + results of the floating-point method may vary slightly + across machines, while the integer methods should give + the same results everywhere. The fast integer method + is much less accurate than the other two. + + -nosmooth Don't use high-quality downsampling. + + -restart N Emit a JPEG restart marker every N MCU rows, or every + N MCU blocks if "B" is attached to the number. + -restart 0 (the default) means no restart markers. + + -smooth N Smooth the input image to eliminate dithering noise. + N, ranging from 1 to 100, indicates the strength of + smoothing. 0 (the default) means no smoothing. + + -maxmemory N Set limit for amount of memory to use in processing + large images. Value is in thousands of bytes, or + millions of bytes if "M" is attached to the number. + For example, -max 4m selects 4000000 bytes. If more + space is needed, temporary files will be used. + + -verbose Enable debug printout. More -v's give more printout. + or -debug Also, version information is printed at startup. + +The -restart option inserts extra markers that allow a JPEG decoder to +resynchronize after a transmission error. Without restart markers, any damage +to a compressed file will usually ruin the image from the point of the error +to the end of the image; with restart markers, the damage is usually confined +to the portion of the image up to the next restart marker. Of course, the +restart markers occupy extra space. We recommend -restart 1 for images that +will be transmitted across unreliable networks such as Usenet. + +The -smooth option filters the input to eliminate fine-scale noise. This is +often useful when converting dithered images to JPEG: a moderate smoothing +factor of 10 to 50 gets rid of dithering patterns in the input file, resulting +in a smaller JPEG file and a better-looking image. Too large a smoothing +factor will visibly blur the image, however. + +Switches for wizards: + + -baseline Force baseline-compatible quantization tables to be + generated. This clamps quantization values to 8 bits + even at low quality settings. (This switch is poorly + named, since it does not ensure that the output is + actually baseline JPEG. For example, you can use + -baseline and -progressive together.) + + -qtables file Use the quantization tables given in the specified + text file. + + -qslots N[,...] Select which quantization table to use for each color + component. + + -sample HxV[,...] Set JPEG sampling factors for each color component. + + -scans file Use the scan script given in the specified text file. + +The "wizard" switches are intended for experimentation with JPEG. If you +don't know what you are doing, DON'T USE THEM. These switches are documented +further in the file wizard.txt. + + +DJPEG DETAILS + +The basic command line switches for djpeg are: + + -colors N Reduce image to at most N colors. This reduces the + or -quantize N number of colors used in the output image, so that it + can be displayed on a colormapped display or stored in + a colormapped file format. For example, if you have + an 8-bit display, you'd need to reduce to 256 or fewer + colors. (-colors is the recommended name, -quantize + is provided only for backwards compatibility.) + + -fast Select recommended processing options for fast, low + quality output. (The default options are chosen for + highest quality output.) Currently, this is equivalent + to "-dct fast -nosmooth -onepass -dither ordered". + + -grayscale Force grayscale output even if JPEG file is color. + Useful for viewing on monochrome displays; also, + djpeg runs noticeably faster in this mode. + + -rgb Force RGB output even if JPEG file is grayscale. + This is provided to support applications that don't + want to cope with grayscale as a separate case. + + -scale M/N Scale the output image by a factor M/N. Currently + supported scale factors are M/N with all M from 1 to + 16, where N is the source DCT size, which is 8 for + baseline JPEG. If the /N part is omitted, then M + specifies the DCT scaled size to be applied on the + given input. For baseline JPEG this is equivalent to + M/8 scaling, since the source DCT size for baseline + JPEG is 8. Scaling is handy if the image is larger + than your screen; also, djpeg runs much faster when + scaling down the output. + + -bmp Select BMP output format (Windows flavor). 8-bit + colormapped format is emitted if -colors or -grayscale + is specified, or if the JPEG file is grayscale; + otherwise, 24-bit full-color format is emitted. + + -gif Select GIF output format. Since GIF does not support + more than 256 colors, -colors 256 is assumed (unless + you specify a smaller number of colors). If you + specify -fast, the default number of colors is 216. + + -os2 Select BMP output format (OS/2 1.x flavor). 8-bit + colormapped format is emitted if -colors or -grayscale + is specified, or if the JPEG file is grayscale; + otherwise, 24-bit full-color format is emitted. + + -pnm Select PBMPLUS (PPM/PGM) output format (this is the + default format). PGM is emitted if the JPEG file is + grayscale or if -grayscale is specified; otherwise + PPM is emitted. + + -rle Select RLE output format. (Requires URT library.) + + -targa Select Targa output format. Grayscale format is + emitted if the JPEG file is grayscale or if + -grayscale is specified; otherwise, colormapped format + is emitted if -colors is specified; otherwise, 24-bit + full-color format is emitted. + +Switches for advanced users: + + -dct int Use integer DCT method (default). + -dct fast Use fast integer DCT (less accurate). + -dct float Use floating-point DCT method. + The float method is very slightly more accurate than + the int method, but is much slower unless your machine + has very fast floating-point hardware. Also note that + results of the floating-point method may vary slightly + across machines, while the integer methods should give + the same results everywhere. The fast integer method + is much less accurate than the other two. + + -dither fs Use Floyd-Steinberg dithering in color quantization. + -dither ordered Use ordered dithering in color quantization. + -dither none Do not use dithering in color quantization. + By default, Floyd-Steinberg dithering is applied when + quantizing colors; this is slow but usually produces + the best results. Ordered dither is a compromise + between speed and quality; no dithering is fast but + usually looks awful. Note that these switches have + no effect unless color quantization is being done. + Ordered dither is only available in -onepass mode. + + -map FILE Quantize to the colors used in the specified image + file. This is useful for producing multiple files + with identical color maps, or for forcing a predefined + set of colors to be used. The FILE must be a GIF + or PPM file. This option overrides -colors and + -onepass. + + -nosmooth Don't use high-quality upsampling. + + -onepass Use one-pass instead of two-pass color quantization. + The one-pass method is faster and needs less memory, + but it produces a lower-quality image. -onepass is + ignored unless you also say -colors N. Also, + the one-pass method is always used for grayscale + output (the two-pass method is no improvement then). + + -maxmemory N Set limit for amount of memory to use in processing + large images. Value is in thousands of bytes, or + millions of bytes if "M" is attached to the number. + For example, -max 4m selects 4000000 bytes. If more + space is needed, temporary files will be used. + + -verbose Enable debug printout. More -v's give more printout. + or -debug Also, version information is printed at startup. + + +HINTS FOR CJPEG + +Color GIF files are not the ideal input for JPEG; JPEG is really intended for +compressing full-color (24-bit) images. In particular, don't try to convert +cartoons, line drawings, and other images that have only a few distinct +colors. GIF works great on these, JPEG does not. If you want to convert a +GIF to JPEG, you should experiment with cjpeg's -quality and -smooth options +to get a satisfactory conversion. -smooth 10 or so is often helpful. + +Avoid running an image through a series of JPEG compression/decompression +cycles. Image quality loss will accumulate; after ten or so cycles the image +may be noticeably worse than it was after one cycle. It's best to use a +lossless format while manipulating an image, then convert to JPEG format when +you are ready to file the image away. + +The -optimize option to cjpeg is worth using when you are making a "final" +version for posting or archiving. It's also a win when you are using low +quality settings to make very small JPEG files; the percentage improvement +is often a lot more than it is on larger files. (At present, -optimize +mode is always selected when generating progressive JPEG files.) + +GIF input files are no longer supported, to avoid the Unisys LZW patent +(now expired). +(Conversion of GIF files to JPEG is usually a bad idea anyway.) + + +HINTS FOR DJPEG + +To get a quick preview of an image, use the -grayscale and/or -scale switches. +"-grayscale -scale 1/8" is the fastest case. + +Several options are available that trade off image quality to gain speed. +"-fast" turns on the recommended settings. + +"-dct fast" and/or "-nosmooth" gain speed at a small sacrifice in quality. +When producing a color-quantized image, "-onepass -dither ordered" is fast but +much lower quality than the default behavior. "-dither none" may give +acceptable results in two-pass mode, but is seldom tolerable in one-pass mode. + +If you are fortunate enough to have very fast floating point hardware, +"-dct float" may be even faster than "-dct fast". But on most machines +"-dct float" is slower than "-dct int"; in this case it is not worth using, +because its theoretical accuracy advantage is too small to be significant +in practice. + +Two-pass color quantization requires a good deal of memory; on MS-DOS machines +it may run out of memory even with -maxmemory 0. In that case you can still +decompress, with some loss of image quality, by specifying -onepass for +one-pass quantization. + +To avoid the Unisys LZW patent (now expired), djpeg produces uncompressed GIF +files. These are larger than they should be, but are readable by standard GIF +decoders. + + +HINTS FOR BOTH PROGRAMS + +If more space is needed than will fit in the available main memory (as +determined by -maxmemory), temporary files will be used. (MS-DOS versions +will try to get extended or expanded memory first.) The temporary files are +often rather large: in typical cases they occupy three bytes per pixel, for +example 3*800*600 = 1.44Mb for an 800x600 image. If you don't have enough +free disk space, leave out -progressive and -optimize (for cjpeg) or specify +-onepass (for djpeg). + +On MS-DOS, the temporary files are created in the directory named by the TMP +or TEMP environment variable, or in the current directory if neither of those +exist. Amiga implementations put the temp files in the directory named by +JPEGTMP:, so be sure to assign JPEGTMP: to a disk partition with adequate free +space. + +The default memory usage limit (-maxmemory) is set when the software is +compiled. If you get an "insufficient memory" error, try specifying a smaller +-maxmemory value, even -maxmemory 0 to use the absolute minimum space. You +may want to recompile with a smaller default value if this happens often. + +On machines that have "environment" variables, you can define the environment +variable JPEGMEM to set the default memory limit. The value is specified as +described for the -maxmemory switch. JPEGMEM overrides the default value +specified when the program was compiled, and itself is overridden by an +explicit -maxmemory switch. + +On MS-DOS machines, -maxmemory is the amount of main (conventional) memory to +use. (Extended or expanded memory is also used if available.) Most +DOS-specific versions of this software do their own memory space estimation +and do not need you to specify -maxmemory. + + +JPEGTRAN + +jpegtran performs various useful transformations of JPEG files. +It can translate the coded representation from one variant of JPEG to another, +for example from baseline JPEG to progressive JPEG or vice versa. It can also +perform some rearrangements of the image data, for example turning an image +from landscape to portrait format by rotation. For EXIF files and JPEG files +containing Exif data, you may prefer to use exiftran instead. + +jpegtran works by rearranging the compressed data (DCT coefficients), without +ever fully decoding the image. Therefore, its transformations are lossless: +there is no image degradation at all, which would not be true if you used +djpeg followed by cjpeg to accomplish the same conversion. But by the same +token, jpegtran cannot perform lossy operations such as changing the image +quality. However, while the image data is losslessly transformed, metadata +can be removed. See the -copy option for specifics. + +jpegtran uses a command line syntax similar to cjpeg or djpeg. +On Unix-like systems, you say: + jpegtran [switches] [inputfile] >outputfile +On most non-Unix systems, you say: + jpegtran [switches] inputfile outputfile +where both the input and output files are JPEG files. + +To specify the coded JPEG representation used in the output file, +jpegtran accepts a subset of the switches recognized by cjpeg: + -optimize Perform optimization of entropy encoding parameters. + -progressive Create progressive JPEG file. + -arithmetic Use arithmetic coding. + -restart N Emit a JPEG restart marker every N MCU rows, or every + N MCU blocks if "B" is attached to the number. + -scans file Use the scan script given in the specified text file. +See the previous discussion of cjpeg for more details about these switches. +If you specify none of these switches, you get a plain baseline-JPEG output +file. The quality setting and so forth are determined by the input file. + +The image can be losslessly transformed by giving one of these switches: + -flip horizontal Mirror image horizontally (left-right). + -flip vertical Mirror image vertically (top-bottom). + -rotate 90 Rotate image 90 degrees clockwise. + -rotate 180 Rotate image 180 degrees. + -rotate 270 Rotate image 270 degrees clockwise (or 90 ccw). + -transpose Transpose image (across UL-to-LR axis). + -transverse Transverse transpose (across UR-to-LL axis). + +The transpose transformation has no restrictions regarding image dimensions. +The other transformations operate rather oddly if the image dimensions are not +a multiple of the iMCU size (usually 8 or 16 pixels), because they can only +transform complete blocks of DCT coefficient data in the desired way. + +jpegtran's default behavior when transforming an odd-size image is designed +to preserve exact reversibility and mathematical consistency of the +transformation set. As stated, transpose is able to flip the entire image +area. Horizontal mirroring leaves any partial iMCU column at the right edge +untouched, but is able to flip all rows of the image. Similarly, vertical +mirroring leaves any partial iMCU row at the bottom edge untouched, but is +able to flip all columns. The other transforms can be built up as sequences +of transpose and flip operations; for consistency, their actions on edge +pixels are defined to be the same as the end result of the corresponding +transpose-and-flip sequence. + +For practical use, you may prefer to discard any untransformable edge pixels +rather than having a strange-looking strip along the right and/or bottom edges +of a transformed image. To do this, add the -trim switch: + -trim Drop non-transformable edge blocks. +Obviously, a transformation with -trim is not reversible, so strictly speaking +jpegtran with this switch is not lossless. Also, the expected mathematical +equivalences between the transformations no longer hold. For example, +"-rot 270 -trim" trims only the bottom edge, but "-rot 90 -trim" followed by +"-rot 180 -trim" trims both edges. + +If you are only interested in perfect transformation, add the -perfect switch: + -perfect Fails with an error if the transformation is not + perfect. +For example you may want to do + jpegtran -rot 90 -perfect foo.jpg || djpeg foo.jpg | pnmflip -r90 | cjpeg +to do a perfect rotation if available or an approximated one if not. + +We also offer a lossless-crop option, which discards data outside a given +image region but losslessly preserves what is inside. Like the rotate and +flip transforms, lossless crop is restricted by the current JPEG format: the +upper left corner of the selected region must fall on an iMCU boundary. If +this does not hold for the given crop parameters, we silently move the upper +left corner up and/or left to make it so, simultaneously increasing the +region dimensions to keep the lower right crop corner unchanged. (Thus, the +output image covers at least the requested region, but may cover more.) +The adjustment of the region dimensions may be optionally disabled by +attaching an 'f' character ("force") to the width or height number. + +The image can be losslessly cropped by giving the switch: + -crop WxH+X+Y Crop to a rectangular subarea of width W, height H + starting at point X,Y. + +A complementary lossless-wipe option is provided to discard (gray out) data +inside a given image region while losslessly preserving what is outside: + -wipe WxH+X+Y Wipe (gray out) a rectangular subarea of + width W, height H starting at point X,Y. + +Other not-strictly-lossless transformation switches are: + + -grayscale Force grayscale output. +This option discards the chrominance channels if the input image is YCbCr +(ie, a standard color JPEG), resulting in a grayscale JPEG file. The +luminance channel is preserved exactly, so this is a better method of reducing +to grayscale than decompression, conversion, and recompression. This switch +is particularly handy for fixing a monochrome picture that was mistakenly +encoded as a color JPEG. (In such a case, the space savings from getting rid +of the near-empty chroma channels won't be large; but the decoding time for +a grayscale JPEG is substantially less than that for a color JPEG.) + + -scale M/N Scale the output image by a factor M/N. +Currently supported scale factors are M/N with all M from 1 to 16, where N is +the source DCT size, which is 8 for baseline JPEG. If the /N part is omitted, +then M specifies the DCT scaled size to be applied on the given input. For +baseline JPEG this is equivalent to M/8 scaling, since the source DCT size +for baseline JPEG is 8. CAUTION: An implementation of the JPEG SmartScale +extension is required for this feature. SmartScale enabled JPEG is not yet +widely implemented, so many decoders will be unable to view a SmartScale +extended JPEG file at all. + +jpegtran also recognizes these switches that control what to do with "extra" +markers, such as comment blocks: + -copy none Copy no extra markers from source file. + This setting suppresses all comments + and other metadata in the source file. + -copy comments Copy only comment markers. + This setting copies comments from the source file, + but discards any other metadata. + -copy all Copy all extra markers. This setting preserves + metadata found in the source file, such as JFIF + thumbnails, Exif data, and Photoshop settings. + In some files these extra markers can be sizable. + Note that this option will copy thumbnails as-is; + they will not be transformed. +The default behavior is -copy comments. (Note: in IJG releases v6 and v6a, +jpegtran always did the equivalent of -copy none.) + +Additional switches recognized by jpegtran are: + -outfile filename + -maxmemory N + -verbose + -debug +These work the same as in cjpeg or djpeg. + + +THE COMMENT UTILITIES + +The JPEG standard allows "comment" (COM) blocks to occur within a JPEG file. +Although the standard doesn't actually define what COM blocks are for, they +are widely used to hold user-supplied text strings. This lets you add +annotations, titles, index terms, etc to your JPEG files, and later retrieve +them as text. COM blocks do not interfere with the image stored in the JPEG +file. The maximum size of a COM block is 64K, but you can have as many of +them as you like in one JPEG file. + +We provide two utility programs to display COM block contents and add COM +blocks to a JPEG file. + +rdjpgcom searches a JPEG file and prints the contents of any COM blocks on +standard output. The command line syntax is + rdjpgcom [-raw] [-verbose] [inputfilename] +The switch "-raw" (or just "-r") causes rdjpgcom to also output non-printable +characters in comments, which are normally escaped for security reasons. +The switch "-verbose" (or just "-v") causes rdjpgcom to also display the JPEG +image dimensions. If you omit the input file name from the command line, +the JPEG file is read from standard input. (This may not work on some +operating systems, if binary data can't be read from stdin.) + +wrjpgcom adds a COM block, containing text you provide, to a JPEG file. +Ordinarily, the COM block is added after any existing COM blocks, but you +can delete the old COM blocks if you wish. wrjpgcom produces a new JPEG +file; it does not modify the input file. DO NOT try to overwrite the input +file by directing wrjpgcom's output back into it; on most systems this will +just destroy your file. + +The command line syntax for wrjpgcom is similar to cjpeg's. On Unix-like +systems, it is + wrjpgcom [switches] [inputfilename] +The output file is written to standard output. The input file comes from +the named file, or from standard input if no input file is named. + +On most non-Unix systems, the syntax is + wrjpgcom [switches] inputfilename outputfilename +where both input and output file names must be given explicitly. + +wrjpgcom understands three switches: + -replace Delete any existing COM blocks from the file. + -comment "Comment text" Supply new COM text on command line. + -cfile name Read text for new COM block from named file. +(Switch names can be abbreviated.) If you have only one line of comment text +to add, you can provide it on the command line with -comment. The comment +text must be surrounded with quotes so that it is treated as a single +argument. Longer comments can be read from a text file. + +If you give neither -comment nor -cfile, then wrjpgcom will read the comment +text from standard input. (In this case an input image file name MUST be +supplied, so that the source JPEG file comes from somewhere else.) You can +enter multiple lines, up to 64KB worth. Type an end-of-file indicator +(usually control-D or control-Z) to terminate the comment text entry. + +wrjpgcom will not add a COM block if the provided comment string is empty. +Therefore -replace -comment "" can be used to delete all COM blocks from a +file. + +These utility programs do not depend on the IJG JPEG library. In +particular, the source code for rdjpgcom is intended as an illustration of +the minimum amount of code required to parse a JPEG file header correctly. diff --git a/compat/libjpeg/wizard.txt b/compat/libjpeg/wizard.txt new file mode 100755 index 0000000..02418ba --- /dev/null +++ b/compat/libjpeg/wizard.txt @@ -0,0 +1,211 @@ +Advanced usage instructions for the Independent JPEG Group's JPEG software +========================================================================== + +This file describes cjpeg's "switches for wizards". + +The "wizard" switches are intended for experimentation with JPEG by persons +who are reasonably knowledgeable about the JPEG standard. If you don't know +what you are doing, DON'T USE THESE SWITCHES. You'll likely produce files +with worse image quality and/or poorer compression than you'd get from the +default settings. Furthermore, these switches must be used with caution +when making files intended for general use, because not all JPEG decoders +will support unusual JPEG parameter settings. + + +Quantization Table Adjustment +----------------------------- + +Ordinarily, cjpeg starts with a default set of tables (the same ones given +as examples in the JPEG standard) and scales them up or down according to +the -quality setting. The details of the scaling algorithm can be found in +jcparam.c. At very low quality settings, some quantization table entries +can get scaled up to values exceeding 255. Although 2-byte quantization +values are supported by the IJG software, this feature is not in baseline +JPEG and is not supported by all implementations. If you need to ensure +wide compatibility of low-quality files, you can constrain the scaled +quantization values to no more than 255 by giving the -baseline switch. +Note that use of -baseline will result in poorer quality for the same file +size, since more bits than necessary are expended on higher AC coefficients. + +You can substitute a different set of quantization values by using the +-qtables switch: + + -qtables file Use the quantization tables given in the named file. + +The specified file should be a text file containing decimal quantization +values. The file should contain one to four tables, each of 64 elements. +The tables are implicitly numbered 0,1,etc. in order of appearance. Table +entries appear in normal array order (NOT in the zigzag order in which they +will be stored in the JPEG file). + +Quantization table files are free format, in that arbitrary whitespace can +appear between numbers. Also, comments can be included: a comment starts +with '#' and extends to the end of the line. Here is an example file that +duplicates the default quantization tables: + + # Quantization tables given in JPEG spec, section K.1 + + # This is table 0 (the luminance table): + 16 11 10 16 24 40 51 61 + 12 12 14 19 26 58 60 55 + 14 13 16 24 40 57 69 56 + 14 17 22 29 51 87 80 62 + 18 22 37 56 68 109 103 77 + 24 35 55 64 81 104 113 92 + 49 64 78 87 103 121 120 101 + 72 92 95 98 112 100 103 99 + + # This is table 1 (the chrominance table): + 17 18 24 47 99 99 99 99 + 18 21 26 66 99 99 99 99 + 24 26 56 99 99 99 99 99 + 47 66 99 99 99 99 99 99 + 99 99 99 99 99 99 99 99 + 99 99 99 99 99 99 99 99 + 99 99 99 99 99 99 99 99 + 99 99 99 99 99 99 99 99 + +If the -qtables switch is used without -quality, then the specified tables +are used exactly as-is. If both -qtables and -quality are used, then the +tables taken from the file are scaled in the same fashion that the default +tables would be scaled for that quality setting. If -baseline appears, then +the quantization values are constrained to the range 1-255. + +By default, cjpeg will use quantization table 0 for luminance components and +table 1 for chrominance components. To override this choice, use the -qslots +switch: + + -qslots N[,...] Select which quantization table to use for + each color component. + +The -qslots switch specifies a quantization table number for each color +component, in the order in which the components appear in the JPEG SOF marker. +For example, to create a separate table for each of Y,Cb,Cr, you could +provide a -qtables file that defines three quantization tables and say +"-qslots 0,1,2". If -qslots gives fewer table numbers than there are color +components, then the last table number is repeated as necessary. + + +Sampling Factor Adjustment +-------------------------- + +By default, cjpeg uses 2:1 horizontal and vertical downsampling when +compressing YCbCr data, and no downsampling for all other color spaces. +You can override this default with the -sample switch: + + -sample HxV[,...] Set JPEG sampling factors for each color + component. + +The -sample switch specifies the JPEG sampling factors for each color +component, in the order in which they appear in the JPEG SOF marker. +If you specify fewer HxV pairs than there are components, the remaining +components are set to 1x1 sampling. For example, the default YCbCr setting +is equivalent to "-sample 2x2,1x1,1x1", which can be abbreviated to +"-sample 2x2". + +There are still some JPEG decoders in existence that support only 2x1 +sampling (also called 4:2:2 sampling). Compatibility with such decoders can +be achieved by specifying "-sample 2x1". This is not recommended unless +really necessary, since it increases file size and encoding/decoding time +with very little quality gain. + + +Multiple Scan / Progression Control +----------------------------------- + +By default, cjpeg emits a single-scan sequential JPEG file. The +-progressive switch generates a progressive JPEG file using a default series +of progression parameters. You can create multiple-scan sequential JPEG +files or progressive JPEG files with custom progression parameters by using +the -scans switch: + + -scans file Use the scan sequence given in the named file. + +The specified file should be a text file containing a "scan script". +The script specifies the contents and ordering of the scans to be emitted. +Each entry in the script defines one scan. A scan definition specifies +the components to be included in the scan, and for progressive JPEG it also +specifies the progression parameters Ss,Se,Ah,Al for the scan. Scan +definitions are separated by semicolons (';'). A semicolon after the last +scan definition is optional. + +Each scan definition contains one to four component indexes, optionally +followed by a colon (':') and the four progressive-JPEG parameters. The +component indexes denote which color component(s) are to be transmitted in +the scan. Components are numbered in the order in which they appear in the +JPEG SOF marker, with the first component being numbered 0. (Note that these +indexes are not the "component ID" codes assigned to the components, just +positional indexes.) + +The progression parameters for each scan are: + Ss Zigzag index of first coefficient included in scan + Se Zigzag index of last coefficient included in scan + Ah Zero for first scan of a coefficient, else Al of prior scan + Al Successive approximation low bit position for scan +If the progression parameters are omitted, the values 0,63,0,0 are used, +producing a sequential JPEG file. cjpeg automatically determines whether +the script represents a progressive or sequential file, by observing whether +Ss and Se values other than 0 and 63 appear. (The -progressive switch is +not needed to specify this; in fact, it is ignored when -scans appears.) +The scan script must meet the JPEG restrictions on progression sequences. +(cjpeg checks that the spec's requirements are obeyed.) + +Scan script files are free format, in that arbitrary whitespace can appear +between numbers and around punctuation. Also, comments can be included: a +comment starts with '#' and extends to the end of the line. For additional +legibility, commas or dashes can be placed between values. (Actually, any +single punctuation character other than ':' or ';' can be inserted.) For +example, the following two scan definitions are equivalent: + 0 1 2: 0 63 0 0; + 0,1,2 : 0-63, 0,0 ; + +Here is an example of a scan script that generates a partially interleaved +sequential JPEG file: + + 0; # Y only in first scan + 1 2; # Cb and Cr in second scan + +Here is an example of a progressive scan script using only spectral selection +(no successive approximation): + + # Interleaved DC scan for Y,Cb,Cr: + 0,1,2: 0-0, 0, 0 ; + # AC scans: + 0: 1-2, 0, 0 ; # First two Y AC coefficients + 0: 3-5, 0, 0 ; # Three more + 1: 1-63, 0, 0 ; # All AC coefficients for Cb + 2: 1-63, 0, 0 ; # All AC coefficients for Cr + 0: 6-9, 0, 0 ; # More Y coefficients + 0: 10-63, 0, 0 ; # Remaining Y coefficients + +Here is an example of a successive-approximation script. This is equivalent +to the default script used by "cjpeg -progressive" for YCbCr images: + + # Initial DC scan for Y,Cb,Cr (lowest bit not sent) + 0,1,2: 0-0, 0, 1 ; + # First AC scan: send first 5 Y AC coefficients, minus 2 lowest bits: + 0: 1-5, 0, 2 ; + # Send all Cr,Cb AC coefficients, minus lowest bit: + # (chroma data is usually too small to be worth subdividing further; + # but note we send Cr first since eye is least sensitive to Cb) + 2: 1-63, 0, 1 ; + 1: 1-63, 0, 1 ; + # Send remaining Y AC coefficients, minus 2 lowest bits: + 0: 6-63, 0, 2 ; + # Send next-to-lowest bit of all Y AC coefficients: + 0: 1-63, 2, 1 ; + # At this point we've sent all but the lowest bit of all coefficients. + # Send lowest bit of DC coefficients + 0,1,2: 0-0, 1, 0 ; + # Send lowest bit of AC coefficients + 2: 1-63, 1, 0 ; + 1: 1-63, 1, 0 ; + # Y AC lowest bit scan is last; it's usually the largest scan + 0: 1-63, 1, 0 ; + +It may be worth pointing out that this script is tuned for quality settings +of around 50 to 75. For lower quality settings, you'd probably want to use +a script with fewer stages of successive approximation (otherwise the +initial scans will be really bad). For higher quality settings, you might +want to use more stages of successive approximation (so that the initial +scans are not too large). diff --git a/compat/libjpeg/wrbmp.c b/compat/libjpeg/wrbmp.c new file mode 100755 index 0000000..2b8146e --- /dev/null +++ b/compat/libjpeg/wrbmp.c @@ -0,0 +1,442 @@ +/* + * wrbmp.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to write output images in Microsoft "BMP" + * format (MS Windows 3.x and OS/2 1.x flavors). + * Either 8-bit colormapped or 24-bit full-color format can be written. + * No compression is supported. + * + * These routines may need modification for non-Unix environments or + * specialized applications. As they stand, they assume output to + * an ordinary stdio stream. + * + * This code contributed by James Arthur Boucher. + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ + +#ifdef BMP_SUPPORTED + + +/* + * To support 12-bit JPEG data, we'd have to scale output down to 8 bits. + * This is not yet implemented. + */ + +#if BITS_IN_JSAMPLE != 8 + Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */ +#endif + +/* + * Since BMP stores scanlines bottom-to-top, we have to invert the image + * from JPEG's top-to-bottom order. To do this, we save the outgoing data + * in a virtual array during put_pixel_row calls, then actually emit the + * BMP file during finish_output. The virtual array contains one JSAMPLE per + * pixel if the output is grayscale or colormapped, three if it is full color. + */ + +/* Private version of data destination object */ + +typedef struct { + struct djpeg_dest_struct pub; /* public fields */ + + boolean is_os2; /* saves the OS2 format request flag */ + + jvirt_sarray_ptr whole_image; /* needed to reverse row order */ + JDIMENSION data_width; /* JSAMPLEs per row */ + JDIMENSION row_width; /* physical width of one row in the BMP file */ + int pad_bytes; /* number of padding bytes needed per row */ + JDIMENSION cur_output_row; /* next row# to write to virtual array */ +} bmp_dest_struct; + +typedef bmp_dest_struct * bmp_dest_ptr; + + +/* Forward declarations */ +LOCAL(void) write_colormap + JPP((j_decompress_ptr cinfo, bmp_dest_ptr dest, + int map_colors, int map_entry_size)); + + +/* + * Write some pixel data. + * In this module rows_supplied will always be 1. + */ + +METHODDEF(void) +put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied) +/* This version is for writing 24-bit pixels */ +{ + bmp_dest_ptr dest = (bmp_dest_ptr) dinfo; + JSAMPARRAY image_ptr; + register JSAMPROW inptr, outptr; + register JDIMENSION col; + int pad; + + /* Access next row in virtual array */ + image_ptr = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, dest->whole_image, + dest->cur_output_row, (JDIMENSION) 1, TRUE); + dest->cur_output_row++; + + /* Transfer data. Note destination values must be in BGR order + * (even though Microsoft's own documents say the opposite). + */ + inptr = dest->pub.buffer[0]; + outptr = image_ptr[0]; + for (col = cinfo->output_width; col > 0; col--) { + outptr[2] = *inptr++; /* can omit GETJSAMPLE() safely */ + outptr[1] = *inptr++; + outptr[0] = *inptr++; + outptr += 3; + } + + /* Zero out the pad bytes. */ + pad = dest->pad_bytes; + while (--pad >= 0) + *outptr++ = 0; +} + +METHODDEF(void) +put_gray_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied) +/* This version is for grayscale OR quantized color output */ +{ + bmp_dest_ptr dest = (bmp_dest_ptr) dinfo; + JSAMPARRAY image_ptr; + register JSAMPROW inptr, outptr; + register JDIMENSION col; + int pad; + + /* Access next row in virtual array */ + image_ptr = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, dest->whole_image, + dest->cur_output_row, (JDIMENSION) 1, TRUE); + dest->cur_output_row++; + + /* Transfer data. */ + inptr = dest->pub.buffer[0]; + outptr = image_ptr[0]; + for (col = cinfo->output_width; col > 0; col--) { + *outptr++ = *inptr++; /* can omit GETJSAMPLE() safely */ + } + + /* Zero out the pad bytes. */ + pad = dest->pad_bytes; + while (--pad >= 0) + *outptr++ = 0; +} + + +/* + * Startup: normally writes the file header. + * In this module we may as well postpone everything until finish_output. + */ + +METHODDEF(void) +start_output_bmp (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) +{ + /* no work here */ +} + + +/* + * Finish up at the end of the file. + * + * Here is where we really output the BMP file. + * + * First, routines to write the Windows and OS/2 variants of the file header. + */ + +LOCAL(void) +write_bmp_header (j_decompress_ptr cinfo, bmp_dest_ptr dest) +/* Write a Windows-style BMP file header, including colormap if needed */ +{ + char bmpfileheader[14]; + char bmpinfoheader[40]; +#define PUT_2B(array,offset,value) \ + (array[offset] = (char) ((value) & 0xFF), \ + array[offset+1] = (char) (((value) >> 8) & 0xFF)) +#define PUT_4B(array,offset,value) \ + (array[offset] = (char) ((value) & 0xFF), \ + array[offset+1] = (char) (((value) >> 8) & 0xFF), \ + array[offset+2] = (char) (((value) >> 16) & 0xFF), \ + array[offset+3] = (char) (((value) >> 24) & 0xFF)) + INT32 headersize, bfSize; + int bits_per_pixel, cmap_entries; + + /* Compute colormap size and total file size */ + if (cinfo->out_color_space == JCS_RGB) { + if (cinfo->quantize_colors) { + /* Colormapped RGB */ + bits_per_pixel = 8; + cmap_entries = 256; + } else { + /* Unquantized, full color RGB */ + bits_per_pixel = 24; + cmap_entries = 0; + } + } else { + /* Grayscale output. We need to fake a 256-entry colormap. */ + bits_per_pixel = 8; + cmap_entries = 256; + } + /* File size */ + headersize = 14 + 40 + cmap_entries * 4; /* Header and colormap */ + bfSize = headersize + (INT32) dest->row_width * (INT32) cinfo->output_height; + + /* Set unused fields of header to 0 */ + MEMZERO(bmpfileheader, SIZEOF(bmpfileheader)); + MEMZERO(bmpinfoheader, SIZEOF(bmpinfoheader)); + + /* Fill the file header */ + bmpfileheader[0] = 0x42; /* first 2 bytes are ASCII 'B', 'M' */ + bmpfileheader[1] = 0x4D; + PUT_4B(bmpfileheader, 2, bfSize); /* bfSize */ + /* we leave bfReserved1 & bfReserved2 = 0 */ + PUT_4B(bmpfileheader, 10, headersize); /* bfOffBits */ + + /* Fill the info header (Microsoft calls this a BITMAPINFOHEADER) */ + PUT_2B(bmpinfoheader, 0, 40); /* biSize */ + PUT_4B(bmpinfoheader, 4, cinfo->output_width); /* biWidth */ + PUT_4B(bmpinfoheader, 8, cinfo->output_height); /* biHeight */ + PUT_2B(bmpinfoheader, 12, 1); /* biPlanes - must be 1 */ + PUT_2B(bmpinfoheader, 14, bits_per_pixel); /* biBitCount */ + /* we leave biCompression = 0, for none */ + /* we leave biSizeImage = 0; this is correct for uncompressed data */ + if (cinfo->density_unit == 2) { /* if have density in dots/cm, then */ + PUT_4B(bmpinfoheader, 24, (INT32) (cinfo->X_density*100)); /* XPels/M */ + PUT_4B(bmpinfoheader, 28, (INT32) (cinfo->Y_density*100)); /* XPels/M */ + } + PUT_2B(bmpinfoheader, 32, cmap_entries); /* biClrUsed */ + /* we leave biClrImportant = 0 */ + + if (JFWRITE(dest->pub.output_file, bmpfileheader, 14) != (size_t) 14) + ERREXIT(cinfo, JERR_FILE_WRITE); + if (JFWRITE(dest->pub.output_file, bmpinfoheader, 40) != (size_t) 40) + ERREXIT(cinfo, JERR_FILE_WRITE); + + if (cmap_entries > 0) + write_colormap(cinfo, dest, cmap_entries, 4); +} + + +LOCAL(void) +write_os2_header (j_decompress_ptr cinfo, bmp_dest_ptr dest) +/* Write an OS2-style BMP file header, including colormap if needed */ +{ + char bmpfileheader[14]; + char bmpcoreheader[12]; + INT32 headersize, bfSize; + int bits_per_pixel, cmap_entries; + + /* Compute colormap size and total file size */ + if (cinfo->out_color_space == JCS_RGB) { + if (cinfo->quantize_colors) { + /* Colormapped RGB */ + bits_per_pixel = 8; + cmap_entries = 256; + } else { + /* Unquantized, full color RGB */ + bits_per_pixel = 24; + cmap_entries = 0; + } + } else { + /* Grayscale output. We need to fake a 256-entry colormap. */ + bits_per_pixel = 8; + cmap_entries = 256; + } + /* File size */ + headersize = 14 + 12 + cmap_entries * 3; /* Header and colormap */ + bfSize = headersize + (INT32) dest->row_width * (INT32) cinfo->output_height; + + /* Set unused fields of header to 0 */ + MEMZERO(bmpfileheader, SIZEOF(bmpfileheader)); + MEMZERO(bmpcoreheader, SIZEOF(bmpcoreheader)); + + /* Fill the file header */ + bmpfileheader[0] = 0x42; /* first 2 bytes are ASCII 'B', 'M' */ + bmpfileheader[1] = 0x4D; + PUT_4B(bmpfileheader, 2, bfSize); /* bfSize */ + /* we leave bfReserved1 & bfReserved2 = 0 */ + PUT_4B(bmpfileheader, 10, headersize); /* bfOffBits */ + + /* Fill the info header (Microsoft calls this a BITMAPCOREHEADER) */ + PUT_2B(bmpcoreheader, 0, 12); /* bcSize */ + PUT_2B(bmpcoreheader, 4, cinfo->output_width); /* bcWidth */ + PUT_2B(bmpcoreheader, 6, cinfo->output_height); /* bcHeight */ + PUT_2B(bmpcoreheader, 8, 1); /* bcPlanes - must be 1 */ + PUT_2B(bmpcoreheader, 10, bits_per_pixel); /* bcBitCount */ + + if (JFWRITE(dest->pub.output_file, bmpfileheader, 14) != (size_t) 14) + ERREXIT(cinfo, JERR_FILE_WRITE); + if (JFWRITE(dest->pub.output_file, bmpcoreheader, 12) != (size_t) 12) + ERREXIT(cinfo, JERR_FILE_WRITE); + + if (cmap_entries > 0) + write_colormap(cinfo, dest, cmap_entries, 3); +} + + +/* + * Write the colormap. + * Windows uses BGR0 map entries; OS/2 uses BGR entries. + */ + +LOCAL(void) +write_colormap (j_decompress_ptr cinfo, bmp_dest_ptr dest, + int map_colors, int map_entry_size) +{ + JSAMPARRAY colormap = cinfo->colormap; + int num_colors = cinfo->actual_number_of_colors; + FILE * outfile = dest->pub.output_file; + int i; + + if (colormap != NULL) { + if (cinfo->out_color_components == 3) { + /* Normal case with RGB colormap */ + for (i = 0; i < num_colors; i++) { + putc(GETJSAMPLE(colormap[2][i]), outfile); + putc(GETJSAMPLE(colormap[1][i]), outfile); + putc(GETJSAMPLE(colormap[0][i]), outfile); + if (map_entry_size == 4) + putc(0, outfile); + } + } else { + /* Grayscale colormap (only happens with grayscale quantization) */ + for (i = 0; i < num_colors; i++) { + putc(GETJSAMPLE(colormap[0][i]), outfile); + putc(GETJSAMPLE(colormap[0][i]), outfile); + putc(GETJSAMPLE(colormap[0][i]), outfile); + if (map_entry_size == 4) + putc(0, outfile); + } + } + } else { + /* If no colormap, must be grayscale data. Generate a linear "map". */ + for (i = 0; i < 256; i++) { + putc(i, outfile); + putc(i, outfile); + putc(i, outfile); + if (map_entry_size == 4) + putc(0, outfile); + } + } + /* Pad colormap with zeros to ensure specified number of colormap entries */ + if (i > map_colors) + ERREXIT1(cinfo, JERR_TOO_MANY_COLORS, i); + for (; i < map_colors; i++) { + putc(0, outfile); + putc(0, outfile); + putc(0, outfile); + if (map_entry_size == 4) + putc(0, outfile); + } +} + + +METHODDEF(void) +finish_output_bmp (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) +{ + bmp_dest_ptr dest = (bmp_dest_ptr) dinfo; + register FILE * outfile = dest->pub.output_file; + JSAMPARRAY image_ptr; + register JSAMPROW data_ptr; + JDIMENSION row; + register JDIMENSION col; + cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; + + /* Write the header and colormap */ + if (dest->is_os2) + write_os2_header(cinfo, dest); + else + write_bmp_header(cinfo, dest); + + /* Write the file body from our virtual array */ + for (row = cinfo->output_height; row > 0; row--) { + if (progress != NULL) { + progress->pub.pass_counter = (long) (cinfo->output_height - row); + progress->pub.pass_limit = (long) cinfo->output_height; + (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); + } + image_ptr = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, dest->whole_image, row-1, (JDIMENSION) 1, FALSE); + data_ptr = image_ptr[0]; + for (col = dest->row_width; col > 0; col--) { + putc(GETJSAMPLE(*data_ptr), outfile); + data_ptr++; + } + } + if (progress != NULL) + progress->completed_extra_passes++; + + /* Make sure we wrote the output file OK */ + fflush(outfile); + if (ferror(outfile)) + ERREXIT(cinfo, JERR_FILE_WRITE); +} + + +/* + * The module selection routine for BMP format output. + */ + +GLOBAL(djpeg_dest_ptr) +jinit_write_bmp (j_decompress_ptr cinfo, boolean is_os2) +{ + bmp_dest_ptr dest; + JDIMENSION row_width; + + /* Create module interface object, fill in method pointers */ + dest = (bmp_dest_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(bmp_dest_struct)); + dest->pub.start_output = start_output_bmp; + dest->pub.finish_output = finish_output_bmp; + dest->is_os2 = is_os2; + + if (cinfo->out_color_space == JCS_GRAYSCALE) { + dest->pub.put_pixel_rows = put_gray_rows; + } else if (cinfo->out_color_space == JCS_RGB) { + if (cinfo->quantize_colors) + dest->pub.put_pixel_rows = put_gray_rows; + else + dest->pub.put_pixel_rows = put_pixel_rows; + } else { + ERREXIT(cinfo, JERR_BMP_COLORSPACE); + } + + /* Calculate output image dimensions so we can allocate space */ + jpeg_calc_output_dimensions(cinfo); + + /* Determine width of rows in the BMP file (padded to 4-byte boundary). */ + row_width = cinfo->output_width * cinfo->output_components; + dest->data_width = row_width; + while ((row_width & 3) != 0) row_width++; + dest->row_width = row_width; + dest->pad_bytes = (int) (row_width - dest->data_width); + + /* Allocate space for inversion array, prepare for write pass */ + dest->whole_image = (*cinfo->mem->request_virt_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, + row_width, cinfo->output_height, (JDIMENSION) 1); + dest->cur_output_row = 0; + if (cinfo->progress != NULL) { + cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; + progress->total_extra_passes++; /* count file input as separate pass */ + } + + /* Create decompressor output buffer. */ + dest->pub.buffer = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, row_width, (JDIMENSION) 1); + dest->pub.buffer_height = 1; + + return (djpeg_dest_ptr) dest; +} + +#endif /* BMP_SUPPORTED */ diff --git a/compat/libjpeg/wrgif.c b/compat/libjpeg/wrgif.c new file mode 100755 index 0000000..d38a42b --- /dev/null +++ b/compat/libjpeg/wrgif.c @@ -0,0 +1,400 @@ +/* + * wrgif.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 2015 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to write output images in GIF format. + * + ************************************************************************** + * NOTE: to avoid entanglements with Unisys' patent on LZW compression, * + * this code has been modified to output "uncompressed GIF" files. * + * There is no trace of the LZW algorithm in this file. * + ************************************************************************** + * + * These routines may need modification for non-Unix environments or + * specialized applications. As they stand, they assume output to + * an ordinary stdio stream. + */ + +/* + * This code is loosely based on ppmtogif from the PBMPLUS distribution + * of Feb. 1991. That file contains the following copyright notice: + * Based on GIFENCODE by David Rowley . + * Lempel-Ziv compression based on "compress" by Spencer W. Thomas et al. + * Copyright (C) 1989 by Jef Poskanzer. + * Permission to use, copy, modify, and distribute this software and its + * documentation for any purpose and without fee is hereby granted, provided + * that the above copyright notice appear in all copies and that both that + * copyright notice and this permission notice appear in supporting + * documentation. This software is provided "as is" without express or + * implied warranty. + * + * We are also required to state that + * "The Graphics Interchange Format(c) is the Copyright property of + * CompuServe Incorporated. GIF(sm) is a Service Mark property of + * CompuServe Incorporated." + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ + +#ifdef GIF_SUPPORTED + + +/* Private version of data destination object */ + +typedef struct { + struct djpeg_dest_struct pub; /* public fields */ + + j_decompress_ptr cinfo; /* back link saves passing separate parm */ + + /* State for packing variable-width codes into a bitstream */ + int n_bits; /* current number of bits/code */ + int maxcode; /* maximum code, given n_bits */ + INT32 cur_accum; /* holds bits not yet output */ + int cur_bits; /* # of bits in cur_accum */ + + /* State for GIF code assignment */ + int ClearCode; /* clear code (doesn't change) */ + int EOFCode; /* EOF code (ditto) */ + int code_counter; /* counts output symbols */ + + /* GIF data packet construction buffer */ + int bytesinpkt; /* # of bytes in current packet */ + char packetbuf[256]; /* workspace for accumulating packet */ + +} gif_dest_struct; + +typedef gif_dest_struct * gif_dest_ptr; + +/* Largest value that will fit in N bits */ +#define MAXCODE(n_bits) ((1 << (n_bits)) - 1) + + +/* + * Routines to package finished data bytes into GIF data blocks. + * A data block consists of a count byte (1..255) and that many data bytes. + */ + +LOCAL(void) +flush_packet (gif_dest_ptr dinfo) +/* flush any accumulated data */ +{ + if (dinfo->bytesinpkt > 0) { /* never write zero-length packet */ + dinfo->packetbuf[0] = (char) dinfo->bytesinpkt++; + if (JFWRITE(dinfo->pub.output_file, dinfo->packetbuf, dinfo->bytesinpkt) + != (size_t) dinfo->bytesinpkt) + ERREXIT(dinfo->cinfo, JERR_FILE_WRITE); + dinfo->bytesinpkt = 0; + } +} + + +/* Add a character to current packet; flush to disk if necessary */ +#define CHAR_OUT(dinfo,c) \ + { (dinfo)->packetbuf[++(dinfo)->bytesinpkt] = (char) (c); \ + if ((dinfo)->bytesinpkt >= 255) \ + flush_packet(dinfo); \ + } + + +/* Routine to convert variable-width codes into a byte stream */ + +LOCAL(void) +output (gif_dest_ptr dinfo, int code) +/* Emit a code of n_bits bits */ +/* Uses cur_accum and cur_bits to reblock into 8-bit bytes */ +{ + dinfo->cur_accum |= ((INT32) code) << dinfo->cur_bits; + dinfo->cur_bits += dinfo->n_bits; + + while (dinfo->cur_bits >= 8) { + CHAR_OUT(dinfo, dinfo->cur_accum & 0xFF); + dinfo->cur_accum >>= 8; + dinfo->cur_bits -= 8; + } +} + + +/* The pseudo-compression algorithm. + * + * In this module we simply output each pixel value as a separate symbol; + * thus, no compression occurs. In fact, there is expansion of one bit per + * pixel, because we use a symbol width one bit wider than the pixel width. + * + * GIF ordinarily uses variable-width symbols, and the decoder will expect + * to ratchet up the symbol width after a fixed number of symbols. + * To simplify the logic and keep the expansion penalty down, we emit a + * GIF Clear code to reset the decoder just before the width would ratchet up. + * Thus, all the symbols in the output file will have the same bit width. + * Note that emitting the Clear codes at the right times is a mere matter of + * counting output symbols and is in no way dependent on the LZW patent. + * + * With a small basic pixel width (low color count), Clear codes will be + * needed very frequently, causing the file to expand even more. So this + * simplistic approach wouldn't work too well on bilevel images, for example. + * But for output of JPEG conversions the pixel width will usually be 8 bits + * (129 to 256 colors), so the overhead added by Clear symbols is only about + * one symbol in every 256. + */ + +LOCAL(void) +compress_init (gif_dest_ptr dinfo, int i_bits) +/* Initialize pseudo-compressor */ +{ + /* init all the state variables */ + dinfo->n_bits = i_bits; + dinfo->maxcode = MAXCODE(dinfo->n_bits); + dinfo->ClearCode = (1 << (i_bits - 1)); + dinfo->EOFCode = dinfo->ClearCode + 1; + dinfo->code_counter = dinfo->ClearCode + 2; + /* init output buffering vars */ + dinfo->bytesinpkt = 0; + dinfo->cur_accum = 0; + dinfo->cur_bits = 0; + /* GIF specifies an initial Clear code */ + output(dinfo, dinfo->ClearCode); +} + + +LOCAL(void) +compress_pixel (gif_dest_ptr dinfo, int c) +/* Accept and "compress" one pixel value. + * The given value must be less than n_bits wide. + */ +{ + /* Output the given pixel value as a symbol. */ + output(dinfo, c); + /* Issue Clear codes often enough to keep the reader from ratcheting up + * its symbol size. + */ + if (dinfo->code_counter < dinfo->maxcode) { + dinfo->code_counter++; + } else { + output(dinfo, dinfo->ClearCode); + dinfo->code_counter = dinfo->ClearCode + 2; /* reset the counter */ + } +} + + +LOCAL(void) +compress_term (gif_dest_ptr dinfo) +/* Clean up at end */ +{ + /* Send an EOF code */ + output(dinfo, dinfo->EOFCode); + /* Flush the bit-packing buffer */ + if (dinfo->cur_bits > 0) { + CHAR_OUT(dinfo, dinfo->cur_accum & 0xFF); + } + /* Flush the packet buffer */ + flush_packet(dinfo); +} + + +/* GIF header construction */ + + +LOCAL(void) +put_word (gif_dest_ptr dinfo, unsigned int w) +/* Emit a 16-bit word, LSB first */ +{ + putc(w & 0xFF, dinfo->pub.output_file); + putc((w >> 8) & 0xFF, dinfo->pub.output_file); +} + + +LOCAL(void) +put_3bytes (gif_dest_ptr dinfo, int val) +/* Emit 3 copies of same byte value --- handy subr for colormap construction */ +{ + putc(val, dinfo->pub.output_file); + putc(val, dinfo->pub.output_file); + putc(val, dinfo->pub.output_file); +} + + +LOCAL(void) +emit_header (gif_dest_ptr dinfo, int num_colors, JSAMPARRAY colormap) +/* Output the GIF file header, including color map */ +/* If colormap==NULL, synthesize a grayscale colormap */ +{ + int BitsPerPixel, ColorMapSize, InitCodeSize, FlagByte; + int cshift = dinfo->cinfo->data_precision - 8; + int i; + + if (num_colors > 256) + ERREXIT1(dinfo->cinfo, JERR_TOO_MANY_COLORS, num_colors); + /* Compute bits/pixel and related values */ + BitsPerPixel = 1; + while (num_colors > (1 << BitsPerPixel)) + BitsPerPixel++; + ColorMapSize = 1 << BitsPerPixel; + if (BitsPerPixel <= 1) + InitCodeSize = 2; + else + InitCodeSize = BitsPerPixel; + /* + * Write the GIF header. + * Note that we generate a plain GIF87 header for maximum compatibility. + */ + putc('G', dinfo->pub.output_file); + putc('I', dinfo->pub.output_file); + putc('F', dinfo->pub.output_file); + putc('8', dinfo->pub.output_file); + putc('7', dinfo->pub.output_file); + putc('a', dinfo->pub.output_file); + /* Write the Logical Screen Descriptor */ + put_word(dinfo, (unsigned int) dinfo->cinfo->output_width); + put_word(dinfo, (unsigned int) dinfo->cinfo->output_height); + FlagByte = 0x80; /* Yes, there is a global color table */ + FlagByte |= (BitsPerPixel-1) << 4; /* color resolution */ + FlagByte |= (BitsPerPixel-1); /* size of global color table */ + putc(FlagByte, dinfo->pub.output_file); + putc(0, dinfo->pub.output_file); /* Background color index */ + putc(0, dinfo->pub.output_file); /* Reserved (aspect ratio in GIF89) */ + /* Write the Global Color Map */ + /* If the color map is more than 8 bits precision, */ + /* we reduce it to 8 bits by shifting */ + for (i=0; i < ColorMapSize; i++) { + if (i < num_colors) { + if (colormap != NULL) { + if (dinfo->cinfo->out_color_space == JCS_RGB) { + /* Normal case: RGB color map */ + putc(GETJSAMPLE(colormap[0][i]) >> cshift, dinfo->pub.output_file); + putc(GETJSAMPLE(colormap[1][i]) >> cshift, dinfo->pub.output_file); + putc(GETJSAMPLE(colormap[2][i]) >> cshift, dinfo->pub.output_file); + } else { + /* Grayscale "color map": possible if quantizing grayscale image */ + put_3bytes(dinfo, GETJSAMPLE(colormap[0][i]) >> cshift); + } + } else { + /* Create a grayscale map of num_colors values, range 0..255 */ + put_3bytes(dinfo, (i * 255 + (num_colors-1)/2) / (num_colors-1)); + } + } else { + /* fill out the map to a power of 2 */ + put_3bytes(dinfo, 0); + } + } + /* Write image separator and Image Descriptor */ + putc(',', dinfo->pub.output_file); /* separator */ + put_word(dinfo, 0); /* left/top offset */ + put_word(dinfo, 0); + put_word(dinfo, (unsigned int) dinfo->cinfo->output_width); /* image size */ + put_word(dinfo, (unsigned int) dinfo->cinfo->output_height); + /* flag byte: not interlaced, no local color map */ + putc(0x00, dinfo->pub.output_file); + /* Write Initial Code Size byte */ + putc(InitCodeSize, dinfo->pub.output_file); + + /* Initialize for "compression" of image data */ + compress_init(dinfo, InitCodeSize+1); +} + + +/* + * Startup: write the file header. + */ + +METHODDEF(void) +start_output_gif (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) +{ + gif_dest_ptr dest = (gif_dest_ptr) dinfo; + + if (cinfo->quantize_colors) + emit_header(dest, cinfo->actual_number_of_colors, cinfo->colormap); + else + emit_header(dest, 256, (JSAMPARRAY) NULL); +} + + +/* + * Write some pixel data. + * In this module rows_supplied will always be 1. + */ + +METHODDEF(void) +put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied) +{ + gif_dest_ptr dest = (gif_dest_ptr) dinfo; + register JSAMPROW ptr; + register JDIMENSION col; + + ptr = dest->pub.buffer[0]; + for (col = cinfo->output_width; col > 0; col--) { + compress_pixel(dest, GETJSAMPLE(*ptr++)); + } +} + + +/* + * Finish up at the end of the file. + */ + +METHODDEF(void) +finish_output_gif (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) +{ + gif_dest_ptr dest = (gif_dest_ptr) dinfo; + + /* Flush "compression" mechanism */ + compress_term(dest); + /* Write a zero-length data block to end the series */ + putc(0, dest->pub.output_file); + /* Write the GIF terminator mark */ + putc(';', dest->pub.output_file); + /* Make sure we wrote the output file OK */ + fflush(dest->pub.output_file); + if (ferror(dest->pub.output_file)) + ERREXIT(cinfo, JERR_FILE_WRITE); +} + + +/* + * The module selection routine for GIF format output. + */ + +GLOBAL(djpeg_dest_ptr) +jinit_write_gif (j_decompress_ptr cinfo) +{ + gif_dest_ptr dest; + + /* Create module interface object, fill in method pointers */ + dest = (gif_dest_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(gif_dest_struct)); + dest->cinfo = cinfo; /* make back link for subroutines */ + dest->pub.start_output = start_output_gif; + dest->pub.put_pixel_rows = put_pixel_rows; + dest->pub.finish_output = finish_output_gif; + + if (cinfo->out_color_space != JCS_GRAYSCALE && + cinfo->out_color_space != JCS_RGB) + ERREXIT(cinfo, JERR_GIF_COLORSPACE); + + /* Force quantization if color or if > 8 bits input */ + if (cinfo->out_color_space != JCS_GRAYSCALE || cinfo->data_precision > 8) { + /* Force quantization to at most 256 colors */ + cinfo->quantize_colors = TRUE; + if (cinfo->desired_number_of_colors > 256) + cinfo->desired_number_of_colors = 256; + } + + /* Calculate output image dimensions so we can allocate space */ + jpeg_calc_output_dimensions(cinfo); + + if (cinfo->output_components != 1) /* safety check: just one component? */ + ERREXIT(cinfo, JERR_GIF_BUG); + + /* Create decompressor output buffer. */ + dest->pub.buffer = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, cinfo->output_width, (JDIMENSION) 1); + dest->pub.buffer_height = 1; + + return &dest->pub; +} + +#endif /* GIF_SUPPORTED */ diff --git a/compat/libjpeg/wrjpgcom.1 b/compat/libjpeg/wrjpgcom.1 new file mode 100755 index 0000000..44dad35 --- /dev/null +++ b/compat/libjpeg/wrjpgcom.1 @@ -0,0 +1,103 @@ +.TH WRJPGCOM 1 "15 June 1995" +.SH NAME +wrjpgcom \- insert text comments into a JPEG file +.SH SYNOPSIS +.B wrjpgcom +[ +.B \-replace +] +[ +.BI \-comment " text" +] +[ +.BI \-cfile " name" +] +[ +.I filename +] +.LP +.SH DESCRIPTION +.LP +.B wrjpgcom +reads the named JPEG/JFIF file, or the standard input if no file is named, +and generates a new JPEG/JFIF file on standard output. A comment block is +added to the file. +.PP +The JPEG standard allows "comment" (COM) blocks to occur within a JPEG file. +Although the standard doesn't actually define what COM blocks are for, they +are widely used to hold user-supplied text strings. This lets you add +annotations, titles, index terms, etc to your JPEG files, and later retrieve +them as text. COM blocks do not interfere with the image stored in the JPEG +file. The maximum size of a COM block is 64K, but you can have as many of +them as you like in one JPEG file. +.PP +.B wrjpgcom +adds a COM block, containing text you provide, to a JPEG file. +Ordinarily, the COM block is added after any existing COM blocks; but you +can delete the old COM blocks if you wish. +.SH OPTIONS +Switch names may be abbreviated, and are not case sensitive. +.TP +.B \-replace +Delete any existing COM blocks from the file. +.TP +.BI \-comment " text" +Supply text for new COM block on command line. +.TP +.BI \-cfile " name" +Read text for new COM block from named file. +.PP +If you have only one line of comment text to add, you can provide it on the +command line with +.BR \-comment . +The comment text must be surrounded with quotes so that it is treated as a +single argument. Longer comments can be read from a text file. +.PP +If you give neither +.B \-comment +nor +.BR \-cfile , +then +.B wrjpgcom +will read the comment text from standard input. (In this case an input image +file name MUST be supplied, so that the source JPEG file comes from somewhere +else.) You can enter multiple lines, up to 64KB worth. Type an end-of-file +indicator (usually control-D) to terminate the comment text entry. +.PP +.B wrjpgcom +will not add a COM block if the provided comment string is empty. Therefore +\fB\-replace \-comment ""\fR can be used to delete all COM blocks from a file. +.SH EXAMPLES +.LP +Add a short comment to in.jpg, producing out.jpg: +.IP +.B wrjpgcom \-c +\fI"View of my back yard" in.jpg +.B > +.I out.jpg +.PP +Attach a long comment previously stored in comment.txt: +.IP +.B wrjpgcom +.I in.jpg +.B < +.I comment.txt +.B > +.I out.jpg +.PP +or equivalently +.IP +.B wrjpgcom +.B -cfile +.I comment.txt +.B < +.I in.jpg +.B > +.I out.jpg +.SH SEE ALSO +.BR cjpeg (1), +.BR djpeg (1), +.BR jpegtran (1), +.BR rdjpgcom (1) +.SH AUTHOR +Independent JPEG Group diff --git a/compat/libjpeg/wrjpgcom.c b/compat/libjpeg/wrjpgcom.c new file mode 100755 index 0000000..66dccee --- /dev/null +++ b/compat/libjpeg/wrjpgcom.c @@ -0,0 +1,599 @@ +/* + * wrjpgcom.c + * + * Copyright (C) 1994-1997, Thomas G. Lane. + * Modified 2015 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a very simple stand-alone application that inserts + * user-supplied text as a COM (comment) marker in a JFIF file. + * This may be useful as an example of the minimum logic needed to parse + * JPEG markers. + */ + +#define JPEG_CJPEG_DJPEG /* to get the command-line config symbols */ +#include "jinclude.h" /* get auto-config symbols, */ + +#ifndef HAVE_STDLIB_H /* should declare malloc() */ +extern void * malloc (); +#endif +#include /* to declare isupper(), tolower() */ +#ifdef USE_SETMODE +#include /* to declare setmode()'s parameter macros */ +/* If you have setmode() but not , just delete this line: */ +#include /* to declare setmode() */ +#endif + +#ifdef USE_CCOMMAND /* command-line reader for Macintosh */ +#ifdef __MWERKS__ +#include /* Metrowerks needs this */ +#include /* ... and this */ +#endif +#ifdef THINK_C +#include /* Think declares it here */ +#endif +#endif + +#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */ +#define READ_BINARY "r" +#define WRITE_BINARY "w" +#else +#ifdef VMS /* VMS is very nonstandard */ +#define READ_BINARY "rb", "ctx=stm" +#define WRITE_BINARY "wb", "ctx=stm" +#else /* standard ANSI-compliant case */ +#define READ_BINARY "rb" +#define WRITE_BINARY "wb" +#endif +#endif + +#ifndef EXIT_FAILURE /* define exit() codes if not provided */ +#define EXIT_FAILURE 1 +#endif +#ifndef EXIT_SUCCESS +#ifdef VMS +#define EXIT_SUCCESS 1 /* VMS is very nonstandard */ +#else +#define EXIT_SUCCESS 0 +#endif +#endif + +/* Reduce this value if your malloc() can't allocate blocks up to 64K. + * On DOS, compiling in large model is usually a better solution. + */ + +#ifndef MAX_COM_LENGTH +#define MAX_COM_LENGTH 65000L /* must be <= 65533 in any case */ +#endif + + +/* + * These macros are used to read the input file and write the output file. + * To reuse this code in another application, you might need to change these. + */ + +static FILE * infile; /* input JPEG file */ + +/* Return next input byte, or EOF if no more */ +#define NEXTBYTE() getc(infile) + +static FILE * outfile; /* output JPEG file */ + +/* Emit an output byte */ +#define PUTBYTE(x) putc((x), outfile) + + +/* Error exit handler */ +#define ERREXIT(msg) (fprintf(stderr, "%s\n", msg), exit(EXIT_FAILURE)) + + +/* Read one byte, testing for EOF */ +static int +read_1_byte (void) +{ + int c; + + c = NEXTBYTE(); + if (c == EOF) + ERREXIT("Premature EOF in JPEG file"); + return c; +} + +/* Read 2 bytes, convert to unsigned int */ +/* All 2-byte quantities in JPEG markers are MSB first */ +static unsigned int +read_2_bytes (void) +{ + int c1, c2; + + c1 = NEXTBYTE(); + if (c1 == EOF) + ERREXIT("Premature EOF in JPEG file"); + c2 = NEXTBYTE(); + if (c2 == EOF) + ERREXIT("Premature EOF in JPEG file"); + return (((unsigned int) c1) << 8) + ((unsigned int) c2); +} + + +/* Routines to write data to output file */ + +static void +write_1_byte (int c) +{ + PUTBYTE(c); +} + +static void +write_2_bytes (unsigned int val) +{ + PUTBYTE((val >> 8) & 0xFF); + PUTBYTE(val & 0xFF); +} + +static void +write_marker (int marker) +{ + PUTBYTE(0xFF); + PUTBYTE(marker); +} + +static void +copy_rest_of_file (void) +{ + int c; + + while ((c = NEXTBYTE()) != EOF) + PUTBYTE(c); +} + + +/* + * JPEG markers consist of one or more 0xFF bytes, followed by a marker + * code byte (which is not an FF). Here are the marker codes of interest + * in this program. (See jdmarker.c for a more complete list.) + */ + +#define M_SOF0 0xC0 /* Start Of Frame N */ +#define M_SOF1 0xC1 /* N indicates which compression process */ +#define M_SOF2 0xC2 /* Only SOF0-SOF2 are now in common use */ +#define M_SOF3 0xC3 +#define M_SOF5 0xC5 /* NB: codes C4 and CC are NOT SOF markers */ +#define M_SOF6 0xC6 +#define M_SOF7 0xC7 +#define M_SOF9 0xC9 +#define M_SOF10 0xCA +#define M_SOF11 0xCB +#define M_SOF13 0xCD +#define M_SOF14 0xCE +#define M_SOF15 0xCF +#define M_SOI 0xD8 /* Start Of Image (beginning of datastream) */ +#define M_EOI 0xD9 /* End Of Image (end of datastream) */ +#define M_SOS 0xDA /* Start Of Scan (begins compressed data) */ +#define M_COM 0xFE /* COMment */ + + +/* + * Find the next JPEG marker and return its marker code. + * We expect at least one FF byte, possibly more if the compressor used FFs + * to pad the file. (Padding FFs will NOT be replicated in the output file.) + * There could also be non-FF garbage between markers. The treatment of such + * garbage is unspecified; we choose to skip over it but emit a warning msg. + * NB: this routine must not be used after seeing SOS marker, since it will + * not deal correctly with FF/00 sequences in the compressed image data... + */ + +static int +next_marker (void) +{ + int c; + int discarded_bytes = 0; + + /* Find 0xFF byte; count and skip any non-FFs. */ + c = read_1_byte(); + while (c != 0xFF) { + discarded_bytes++; + c = read_1_byte(); + } + /* Get marker code byte, swallowing any duplicate FF bytes. Extra FFs + * are legal as pad bytes, so don't count them in discarded_bytes. + */ + do { + c = read_1_byte(); + } while (c == 0xFF); + + if (discarded_bytes != 0) { + fprintf(stderr, "Warning: garbage data found in JPEG file\n"); + } + + return c; +} + + +/* + * Read the initial marker, which should be SOI. + * For a JFIF file, the first two bytes of the file should be literally + * 0xFF M_SOI. To be more general, we could use next_marker, but if the + * input file weren't actually JPEG at all, next_marker might read the whole + * file and then return a misleading error message... + */ + +static int +first_marker (void) +{ + int c1, c2; + + c1 = NEXTBYTE(); + c2 = NEXTBYTE(); + if (c1 != 0xFF || c2 != M_SOI) + ERREXIT("Not a JPEG file"); + return c2; +} + + +/* + * Most types of marker are followed by a variable-length parameter segment. + * This routine skips over the parameters for any marker we don't otherwise + * want to process. + * Note that we MUST skip the parameter segment explicitly in order not to + * be fooled by 0xFF bytes that might appear within the parameter segment; + * such bytes do NOT introduce new markers. + */ + +static void +copy_variable (void) +/* Copy an unknown or uninteresting variable-length marker */ +{ + unsigned int length; + + /* Get the marker parameter length count */ + length = read_2_bytes(); + write_2_bytes(length); + /* Length includes itself, so must be at least 2 */ + if (length < 2) + ERREXIT("Erroneous JPEG marker length"); + length -= 2; + /* Skip over the remaining bytes */ + while (length > 0) { + write_1_byte(read_1_byte()); + length--; + } +} + +static void +skip_variable (void) +/* Skip over an unknown or uninteresting variable-length marker */ +{ + unsigned int length; + + /* Get the marker parameter length count */ + length = read_2_bytes(); + /* Length includes itself, so must be at least 2 */ + if (length < 2) + ERREXIT("Erroneous JPEG marker length"); + length -= 2; + /* Skip over the remaining bytes */ + while (length > 0) { + (void) read_1_byte(); + length--; + } +} + + +/* + * Parse the marker stream until SOFn or EOI is seen; + * copy data to output, but discard COM markers unless keep_COM is true. + */ + +static int +scan_JPEG_header (int keep_COM) +{ + int marker; + + /* Expect SOI at start of file */ + if (first_marker() != M_SOI) + ERREXIT("Expected SOI marker first"); + write_marker(M_SOI); + + /* Scan miscellaneous markers until we reach SOFn. */ + for (;;) { + marker = next_marker(); + switch (marker) { + /* Note that marker codes 0xC4, 0xC8, 0xCC are not, and must not be, + * treated as SOFn. C4 in particular is actually DHT. + */ + case M_SOF0: /* Baseline */ + case M_SOF1: /* Extended sequential, Huffman */ + case M_SOF2: /* Progressive, Huffman */ + case M_SOF3: /* Lossless, Huffman */ + case M_SOF5: /* Differential sequential, Huffman */ + case M_SOF6: /* Differential progressive, Huffman */ + case M_SOF7: /* Differential lossless, Huffman */ + case M_SOF9: /* Extended sequential, arithmetic */ + case M_SOF10: /* Progressive, arithmetic */ + case M_SOF11: /* Lossless, arithmetic */ + case M_SOF13: /* Differential sequential, arithmetic */ + case M_SOF14: /* Differential progressive, arithmetic */ + case M_SOF15: /* Differential lossless, arithmetic */ + return marker; + + case M_SOS: /* should not see compressed data before SOF */ + ERREXIT("SOS without prior SOFn"); + break; + + case M_EOI: /* in case it's a tables-only JPEG stream */ + return marker; + + case M_COM: /* Existing COM: conditionally discard */ + if (keep_COM) { + write_marker(marker); + copy_variable(); + } else { + skip_variable(); + } + break; + + default: /* Anything else just gets copied */ + write_marker(marker); + copy_variable(); /* we assume it has a parameter count... */ + break; + } + } /* end loop */ +} + + +/* Command line parsing code */ + +static const char * progname; /* program name for error messages */ + + +static void +usage (void) +/* complain about bad command line */ +{ + fprintf(stderr, "wrjpgcom inserts a textual comment in a JPEG file.\n"); + fprintf(stderr, "You can add to or replace any existing comment(s).\n"); + + fprintf(stderr, "Usage: %s [switches] ", progname); +#ifdef TWO_FILE_COMMANDLINE + fprintf(stderr, "inputfile outputfile\n"); +#else + fprintf(stderr, "[inputfile]\n"); +#endif + + fprintf(stderr, "Switches (names may be abbreviated):\n"); + fprintf(stderr, " -replace Delete any existing comments\n"); + fprintf(stderr, " -comment \"text\" Insert comment with given text\n"); + fprintf(stderr, " -cfile name Read comment from named file\n"); + fprintf(stderr, "Notice that you must put quotes around the comment text\n"); + fprintf(stderr, "when you use -comment.\n"); + fprintf(stderr, "If you do not give either -comment or -cfile on the command line,\n"); + fprintf(stderr, "then the comment text is read from standard input.\n"); + fprintf(stderr, "It can be multiple lines, up to %u characters total.\n", + (unsigned int) MAX_COM_LENGTH); +#ifndef TWO_FILE_COMMANDLINE + fprintf(stderr, "You must specify an input JPEG file name when supplying\n"); + fprintf(stderr, "comment text from standard input.\n"); +#endif + + exit(EXIT_FAILURE); +} + + +static int +keymatch (char * arg, const char * keyword, int minchars) +/* Case-insensitive matching of (possibly abbreviated) keyword switches. */ +/* keyword is the constant keyword (must be lower case already), */ +/* minchars is length of minimum legal abbreviation. */ +{ + register int ca, ck; + register int nmatched = 0; + + while ((ca = *arg++) != '\0') { + if ((ck = *keyword++) == '\0') + return 0; /* arg longer than keyword, no good */ + if (isupper(ca)) /* force arg to lcase (assume ck is already) */ + ca = tolower(ca); + if (ca != ck) + return 0; /* no good */ + nmatched++; /* count matched characters */ + } + /* reached end of argument; fail if it's too short for unique abbrev */ + if (nmatched < minchars) + return 0; + return 1; /* A-OK */ +} + + +/* + * The main program. + */ + +int +main (int argc, char **argv) +{ + int argn; + char * arg; + int keep_COM = 1; + char * comment_arg = NULL; + FILE * comment_file = NULL; + unsigned int comment_length = 0; + int marker; + + /* On Mac, fetch a command line. */ +#ifdef USE_CCOMMAND + argc = ccommand(&argv); +#endif + + progname = argv[0]; + if (progname == NULL || progname[0] == 0) + progname = "wrjpgcom"; /* in case C library doesn't provide it */ + + /* Parse switches, if any */ + for (argn = 1; argn < argc; argn++) { + arg = argv[argn]; + if (arg[0] != '-') + break; /* not switch, must be file name */ + arg++; /* advance over '-' */ + if (keymatch(arg, "replace", 1)) { + keep_COM = 0; + } else if (keymatch(arg, "cfile", 2)) { + if (++argn >= argc) usage(); + if ((comment_file = fopen(argv[argn], "r")) == NULL) { + fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]); + exit(EXIT_FAILURE); + } + } else if (keymatch(arg, "comment", 1)) { + if (++argn >= argc) usage(); + comment_arg = argv[argn]; + /* If the comment text starts with '"', then we are probably running + * under MS-DOG and must parse out the quoted string ourselves. Sigh. + */ + if (comment_arg[0] == '"') { + comment_arg = (char *) malloc((size_t) MAX_COM_LENGTH); + if (comment_arg == NULL) + ERREXIT("Insufficient memory"); + if (strlen(argv[argn]+1) >= (size_t) MAX_COM_LENGTH) { + fprintf(stderr, "Comment text may not exceed %u bytes\n", + (unsigned int) MAX_COM_LENGTH); + exit(EXIT_FAILURE); + } + strcpy(comment_arg, argv[argn]+1); + for (;;) { + comment_length = (unsigned int) strlen(comment_arg); + if (comment_length > 0 && comment_arg[comment_length-1] == '"') { + comment_arg[comment_length-1] = '\0'; /* zap terminating quote */ + break; + } + if (++argn >= argc) + ERREXIT("Missing ending quote mark"); + if (strlen(comment_arg) + 1 + strlen(argv[argn]) >= + (size_t) MAX_COM_LENGTH) { + fprintf(stderr, "Comment text may not exceed %u bytes\n", + (unsigned int) MAX_COM_LENGTH); + exit(EXIT_FAILURE); + } + strcat(comment_arg, " "); + strcat(comment_arg, argv[argn]); + } + } else if (strlen(comment_arg) >= (size_t) MAX_COM_LENGTH) { + fprintf(stderr, "Comment text may not exceed %u bytes\n", + (unsigned int) MAX_COM_LENGTH); + exit(EXIT_FAILURE); + } + comment_length = (unsigned int) strlen(comment_arg); + } else + usage(); + } + + /* Cannot use both -comment and -cfile. */ + if (comment_arg != NULL && comment_file != NULL) + usage(); + /* If there is neither -comment nor -cfile, we will read the comment text + * from stdin; in this case there MUST be an input JPEG file name. + */ + if (comment_arg == NULL && comment_file == NULL && argn >= argc) + usage(); + + /* Open the input file. */ + if (argn < argc) { + if ((infile = fopen(argv[argn], READ_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]); + exit(EXIT_FAILURE); + } + } else { + /* default input file is stdin */ +#ifdef USE_SETMODE /* need to hack file mode? */ + setmode(fileno(stdin), O_BINARY); +#endif +#ifdef USE_FDOPEN /* need to re-open in binary mode? */ + if ((infile = fdopen(fileno(stdin), READ_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open stdin\n", progname); + exit(EXIT_FAILURE); + } +#else + infile = stdin; +#endif + } + + /* Open the output file. */ +#ifdef TWO_FILE_COMMANDLINE + /* Must have explicit output file name */ + if (argn != argc-2) { + fprintf(stderr, "%s: must name one input and one output file\n", + progname); + usage(); + } + if ((outfile = fopen(argv[argn+1], WRITE_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open %s\n", progname, argv[argn+1]); + exit(EXIT_FAILURE); + } +#else + /* Unix style: expect zero or one file name */ + if (argn < argc-1) { + fprintf(stderr, "%s: only one input file\n", progname); + usage(); + } + /* default output file is stdout */ +#ifdef USE_SETMODE /* need to hack file mode? */ + setmode(fileno(stdout), O_BINARY); +#endif +#ifdef USE_FDOPEN /* need to re-open in binary mode? */ + if ((outfile = fdopen(fileno(stdout), WRITE_BINARY)) == NULL) { + fprintf(stderr, "%s: can't open stdout\n", progname); + exit(EXIT_FAILURE); + } +#else + outfile = stdout; +#endif +#endif /* TWO_FILE_COMMANDLINE */ + + /* Collect comment text from comment_file or stdin, if necessary */ + if (comment_arg == NULL) { + FILE * src_file; + int c; + + comment_arg = (char *) malloc((size_t) MAX_COM_LENGTH); + if (comment_arg == NULL) + ERREXIT("Insufficient memory"); + comment_length = 0; + src_file = (comment_file != NULL ? comment_file : stdin); + while ((c = getc(src_file)) != EOF) { + if (comment_length >= (unsigned int) MAX_COM_LENGTH) { + fprintf(stderr, "Comment text may not exceed %u bytes\n", + (unsigned int) MAX_COM_LENGTH); + exit(EXIT_FAILURE); + } + comment_arg[comment_length++] = (char) c; + } + if (comment_file != NULL) + fclose(comment_file); + } + + /* Copy JPEG headers until SOFn marker; + * we will insert the new comment marker just before SOFn. + * This (a) causes the new comment to appear after, rather than before, + * existing comments; and (b) ensures that comments come after any JFIF + * or JFXX markers, as required by the JFIF specification. + */ + marker = scan_JPEG_header(keep_COM); + /* Insert the new COM marker, but only if nonempty text has been supplied */ + if (comment_length > 0) { + write_marker(M_COM); + write_2_bytes(comment_length + 2); + while (comment_length > 0) { + write_1_byte(*comment_arg++); + comment_length--; + } + } + /* Duplicate the remainder of the source file. + * Note that any COM markers occuring after SOF will not be touched. + */ + write_marker(marker); + copy_rest_of_file(); + + /* All done. */ + exit(EXIT_SUCCESS); + return 0; /* suppress no-return-value warnings */ +} diff --git a/compat/libjpeg/wrppm.c b/compat/libjpeg/wrppm.c new file mode 100755 index 0000000..1e56d9c --- /dev/null +++ b/compat/libjpeg/wrppm.c @@ -0,0 +1,269 @@ +/* + * wrppm.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * Modified 2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to write output images in PPM/PGM format. + * The extended 2-byte-per-sample raw PPM/PGM formats are supported. + * The PBMPLUS library is NOT required to compile this software + * (but it is highly useful as a set of PPM image manipulation programs). + * + * These routines may need modification for non-Unix environments or + * specialized applications. As they stand, they assume output to + * an ordinary stdio stream. + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ + +#ifdef PPM_SUPPORTED + + +/* + * For 12-bit JPEG data, we either downscale the values to 8 bits + * (to write standard byte-per-sample PPM/PGM files), or output + * nonstandard word-per-sample PPM/PGM files. Downscaling is done + * if PPM_NORAWWORD is defined (this can be done in the Makefile + * or in jconfig.h). + * (When the core library supports data precision reduction, a cleaner + * implementation will be to ask for that instead.) + */ + +#if BITS_IN_JSAMPLE == 8 +#define PUTPPMSAMPLE(ptr,v) *ptr++ = (char) (v) +#define BYTESPERSAMPLE 1 +#define PPM_MAXVAL 255 +#else +#ifdef PPM_NORAWWORD +#define PUTPPMSAMPLE(ptr,v) *ptr++ = (char) ((v) >> (BITS_IN_JSAMPLE-8)) +#define BYTESPERSAMPLE 1 +#define PPM_MAXVAL 255 +#else +/* The word-per-sample format always puts the MSB first. */ +#define PUTPPMSAMPLE(ptr,v) \ + { register int val_ = v; \ + *ptr++ = (char) ((val_ >> 8) & 0xFF); \ + *ptr++ = (char) (val_ & 0xFF); \ + } +#define BYTESPERSAMPLE 2 +#define PPM_MAXVAL ((1<pub.output_file, dest->iobuffer, dest->buffer_width); +} + + +/* + * This code is used when we have to copy the data and apply a pixel + * format translation. Typically this only happens in 12-bit mode. + */ + +METHODDEF(void) +copy_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied) +{ + ppm_dest_ptr dest = (ppm_dest_ptr) dinfo; + register char * bufferptr; + register JSAMPROW ptr; + register JDIMENSION col; + + ptr = dest->pub.buffer[0]; + bufferptr = dest->iobuffer; + for (col = dest->samples_per_row; col > 0; col--) { + PUTPPMSAMPLE(bufferptr, GETJSAMPLE(*ptr++)); + } + (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width); +} + + +/* + * Write some pixel data when color quantization is in effect. + * We have to demap the color index values to straight data. + */ + +METHODDEF(void) +put_demapped_rgb (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied) +{ + ppm_dest_ptr dest = (ppm_dest_ptr) dinfo; + register char * bufferptr; + register int pixval; + register JSAMPROW ptr; + register JSAMPROW color_map0 = cinfo->colormap[0]; + register JSAMPROW color_map1 = cinfo->colormap[1]; + register JSAMPROW color_map2 = cinfo->colormap[2]; + register JDIMENSION col; + + ptr = dest->pub.buffer[0]; + bufferptr = dest->iobuffer; + for (col = cinfo->output_width; col > 0; col--) { + pixval = GETJSAMPLE(*ptr++); + PUTPPMSAMPLE(bufferptr, GETJSAMPLE(color_map0[pixval])); + PUTPPMSAMPLE(bufferptr, GETJSAMPLE(color_map1[pixval])); + PUTPPMSAMPLE(bufferptr, GETJSAMPLE(color_map2[pixval])); + } + (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width); +} + + +METHODDEF(void) +put_demapped_gray (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied) +{ + ppm_dest_ptr dest = (ppm_dest_ptr) dinfo; + register char * bufferptr; + register JSAMPROW ptr; + register JSAMPROW color_map = cinfo->colormap[0]; + register JDIMENSION col; + + ptr = dest->pub.buffer[0]; + bufferptr = dest->iobuffer; + for (col = cinfo->output_width; col > 0; col--) { + PUTPPMSAMPLE(bufferptr, GETJSAMPLE(color_map[GETJSAMPLE(*ptr++)])); + } + (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width); +} + + +/* + * Startup: write the file header. + */ + +METHODDEF(void) +start_output_ppm (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) +{ + ppm_dest_ptr dest = (ppm_dest_ptr) dinfo; + + /* Emit file header */ + switch (cinfo->out_color_space) { + case JCS_GRAYSCALE: + /* emit header for raw PGM format */ + fprintf(dest->pub.output_file, "P5\n%ld %ld\n%d\n", + (long) cinfo->output_width, (long) cinfo->output_height, + PPM_MAXVAL); + break; + case JCS_RGB: + /* emit header for raw PPM format */ + fprintf(dest->pub.output_file, "P6\n%ld %ld\n%d\n", + (long) cinfo->output_width, (long) cinfo->output_height, + PPM_MAXVAL); + break; + default: + ERREXIT(cinfo, JERR_PPM_COLORSPACE); + } +} + + +/* + * Finish up at the end of the file. + */ + +METHODDEF(void) +finish_output_ppm (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) +{ + /* Make sure we wrote the output file OK */ + fflush(dinfo->output_file); + if (ferror(dinfo->output_file)) + ERREXIT(cinfo, JERR_FILE_WRITE); +} + + +/* + * The module selection routine for PPM format output. + */ + +GLOBAL(djpeg_dest_ptr) +jinit_write_ppm (j_decompress_ptr cinfo) +{ + ppm_dest_ptr dest; + + /* Create module interface object, fill in method pointers */ + dest = (ppm_dest_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(ppm_dest_struct)); + dest->pub.start_output = start_output_ppm; + dest->pub.finish_output = finish_output_ppm; + + /* Calculate output image dimensions so we can allocate space */ + jpeg_calc_output_dimensions(cinfo); + + /* Create physical I/O buffer. Note we make this near on a PC. */ + dest->samples_per_row = cinfo->output_width * cinfo->out_color_components; + dest->buffer_width = dest->samples_per_row * (BYTESPERSAMPLE * SIZEOF(char)); + dest->iobuffer = (char *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, dest->buffer_width); + + if (cinfo->quantize_colors || BITS_IN_JSAMPLE != 8 || + SIZEOF(JSAMPLE) != SIZEOF(char)) { + /* When quantizing, we need an output buffer for colormap indexes + * that's separate from the physical I/O buffer. We also need a + * separate buffer if pixel format translation must take place. + */ + dest->pub.buffer = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + cinfo->output_width * cinfo->output_components, (JDIMENSION) 1); + dest->pub.buffer_height = 1; + if (! cinfo->quantize_colors) + dest->pub.put_pixel_rows = copy_pixel_rows; + else if (cinfo->out_color_space == JCS_GRAYSCALE) + dest->pub.put_pixel_rows = put_demapped_gray; + else + dest->pub.put_pixel_rows = put_demapped_rgb; + } else { + /* We will fwrite() directly from decompressor output buffer. */ + /* Synthesize a JSAMPARRAY pointer structure */ + /* Cast here implies near->far pointer conversion on PCs */ + dest->pixrow = (JSAMPROW) dest->iobuffer; + dest->pub.buffer = & dest->pixrow; + dest->pub.buffer_height = 1; + dest->pub.put_pixel_rows = put_pixel_rows; + } + + return (djpeg_dest_ptr) dest; +} + +#endif /* PPM_SUPPORTED */ diff --git a/compat/libjpeg/wrrle.c b/compat/libjpeg/wrrle.c new file mode 100755 index 0000000..7a00c0d --- /dev/null +++ b/compat/libjpeg/wrrle.c @@ -0,0 +1,305 @@ +/* + * wrrle.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to write output images in RLE format. + * The Utah Raster Toolkit library is required (version 3.1 or later). + * + * These routines may need modification for non-Unix environments or + * specialized applications. As they stand, they assume output to + * an ordinary stdio stream. + * + * Based on code contributed by Mike Lijewski, + * with updates from Robert Hutchinson. + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ + +#ifdef RLE_SUPPORTED + +/* rle.h is provided by the Utah Raster Toolkit. */ + +#include + +/* + * We assume that JSAMPLE has the same representation as rle_pixel, + * to wit, "unsigned char". Hence we can't cope with 12- or 16-bit samples. + */ + +#if BITS_IN_JSAMPLE != 8 + Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */ +#endif + + +/* + * Since RLE stores scanlines bottom-to-top, we have to invert the image + * from JPEG's top-to-bottom order. To do this, we save the outgoing data + * in a virtual array during put_pixel_row calls, then actually emit the + * RLE file during finish_output. + */ + + +/* + * For now, if we emit an RLE color map then it is always 256 entries long, + * though not all of the entries need be used. + */ + +#define CMAPBITS 8 +#define CMAPLENGTH (1<<(CMAPBITS)) + +typedef struct { + struct djpeg_dest_struct pub; /* public fields */ + + jvirt_sarray_ptr image; /* virtual array to store the output image */ + rle_map *colormap; /* RLE-style color map, or NULL if none */ + rle_pixel **rle_row; /* To pass rows to rle_putrow() */ + +} rle_dest_struct; + +typedef rle_dest_struct * rle_dest_ptr; + +/* Forward declarations */ +METHODDEF(void) rle_put_pixel_rows + JPP((j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied)); + + +/* + * Write the file header. + * + * In this module it's easier to wait till finish_output to write anything. + */ + +METHODDEF(void) +start_output_rle (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) +{ + rle_dest_ptr dest = (rle_dest_ptr) dinfo; + size_t cmapsize; + int i, ci; +#ifdef PROGRESS_REPORT + cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; +#endif + + /* + * Make sure the image can be stored in RLE format. + * + * - RLE stores image dimensions as *signed* 16 bit integers. JPEG + * uses unsigned, so we have to check the width. + * + * - Colorspace is expected to be grayscale or RGB. + * + * - The number of channels (components) is expected to be 1 (grayscale/ + * pseudocolor) or 3 (truecolor/directcolor). + * (could be 2 or 4 if using an alpha channel, but we aren't) + */ + + if (cinfo->output_width > 32767 || cinfo->output_height > 32767) + ERREXIT2(cinfo, JERR_RLE_DIMENSIONS, cinfo->output_width, + cinfo->output_height); + + if (cinfo->out_color_space != JCS_GRAYSCALE && + cinfo->out_color_space != JCS_RGB) + ERREXIT(cinfo, JERR_RLE_COLORSPACE); + + if (cinfo->output_components != 1 && cinfo->output_components != 3) + ERREXIT1(cinfo, JERR_RLE_TOOMANYCHANNELS, cinfo->num_components); + + /* Convert colormap, if any, to RLE format. */ + + dest->colormap = NULL; + + if (cinfo->quantize_colors) { + /* Allocate storage for RLE-style cmap, zero any extra entries */ + cmapsize = cinfo->out_color_components * CMAPLENGTH * SIZEOF(rle_map); + dest->colormap = (rle_map *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, cmapsize); + MEMZERO(dest->colormap, cmapsize); + + /* Save away data in RLE format --- note 8-bit left shift! */ + /* Shifting would need adjustment for JSAMPLEs wider than 8 bits. */ + for (ci = 0; ci < cinfo->out_color_components; ci++) { + for (i = 0; i < cinfo->actual_number_of_colors; i++) { + dest->colormap[ci * CMAPLENGTH + i] = + GETJSAMPLE(cinfo->colormap[ci][i]) << 8; + } + } + } + + /* Set the output buffer to the first row */ + dest->pub.buffer = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, dest->image, (JDIMENSION) 0, (JDIMENSION) 1, TRUE); + dest->pub.buffer_height = 1; + + dest->pub.put_pixel_rows = rle_put_pixel_rows; + +#ifdef PROGRESS_REPORT + if (progress != NULL) { + progress->total_extra_passes++; /* count file writing as separate pass */ + } +#endif +} + + +/* + * Write some pixel data. + * + * This routine just saves the data away in a virtual array. + */ + +METHODDEF(void) +rle_put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied) +{ + rle_dest_ptr dest = (rle_dest_ptr) dinfo; + + if (cinfo->output_scanline < cinfo->output_height) { + dest->pub.buffer = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, dest->image, + cinfo->output_scanline, (JDIMENSION) 1, TRUE); + } +} + +/* + * Finish up at the end of the file. + * + * Here is where we really output the RLE file. + */ + +METHODDEF(void) +finish_output_rle (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) +{ + rle_dest_ptr dest = (rle_dest_ptr) dinfo; + rle_hdr header; /* Output file information */ + rle_pixel **rle_row, *red, *green, *blue; + JSAMPROW output_row; + char cmapcomment[80]; + int row, col; + int ci; +#ifdef PROGRESS_REPORT + cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; +#endif + + /* Initialize the header info */ + header = *rle_hdr_init(NULL); + header.rle_file = dest->pub.output_file; + header.xmin = 0; + header.xmax = cinfo->output_width - 1; + header.ymin = 0; + header.ymax = cinfo->output_height - 1; + header.alpha = 0; + header.ncolors = cinfo->output_components; + for (ci = 0; ci < cinfo->output_components; ci++) { + RLE_SET_BIT(header, ci); + } + if (cinfo->quantize_colors) { + header.ncmap = cinfo->out_color_components; + header.cmaplen = CMAPBITS; + header.cmap = dest->colormap; + /* Add a comment to the output image with the true colormap length. */ + sprintf(cmapcomment, "color_map_length=%d", cinfo->actual_number_of_colors); + rle_putcom(cmapcomment, &header); + } + + /* Emit the RLE header and color map (if any) */ + rle_put_setup(&header); + + /* Now output the RLE data from our virtual array. + * We assume here that (a) rle_pixel is represented the same as JSAMPLE, + * and (b) we are not on a machine where FAR pointers differ from regular. + */ + +#ifdef PROGRESS_REPORT + if (progress != NULL) { + progress->pub.pass_limit = cinfo->output_height; + progress->pub.pass_counter = 0; + (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); + } +#endif + + if (cinfo->output_components == 1) { + for (row = cinfo->output_height-1; row >= 0; row--) { + rle_row = (rle_pixel **) (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, dest->image, + (JDIMENSION) row, (JDIMENSION) 1, FALSE); + rle_putrow(rle_row, (int) cinfo->output_width, &header); +#ifdef PROGRESS_REPORT + if (progress != NULL) { + progress->pub.pass_counter++; + (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); + } +#endif + } + } else { + for (row = cinfo->output_height-1; row >= 0; row--) { + rle_row = (rle_pixel **) dest->rle_row; + output_row = * (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, dest->image, + (JDIMENSION) row, (JDIMENSION) 1, FALSE); + red = rle_row[0]; + green = rle_row[1]; + blue = rle_row[2]; + for (col = cinfo->output_width; col > 0; col--) { + *red++ = GETJSAMPLE(*output_row++); + *green++ = GETJSAMPLE(*output_row++); + *blue++ = GETJSAMPLE(*output_row++); + } + rle_putrow(rle_row, (int) cinfo->output_width, &header); +#ifdef PROGRESS_REPORT + if (progress != NULL) { + progress->pub.pass_counter++; + (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); + } +#endif + } + } + +#ifdef PROGRESS_REPORT + if (progress != NULL) + progress->completed_extra_passes++; +#endif + + /* Emit file trailer */ + rle_puteof(&header); + fflush(dest->pub.output_file); + if (ferror(dest->pub.output_file)) + ERREXIT(cinfo, JERR_FILE_WRITE); +} + + +/* + * The module selection routine for RLE format output. + */ + +GLOBAL(djpeg_dest_ptr) +jinit_write_rle (j_decompress_ptr cinfo) +{ + rle_dest_ptr dest; + + /* Create module interface object, fill in method pointers */ + dest = (rle_dest_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(rle_dest_struct)); + dest->pub.start_output = start_output_rle; + dest->pub.finish_output = finish_output_rle; + + /* Calculate output image dimensions so we can allocate space */ + jpeg_calc_output_dimensions(cinfo); + + /* Allocate a work array for output to the RLE library. */ + dest->rle_row = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + cinfo->output_width, (JDIMENSION) cinfo->output_components); + + /* Allocate a virtual array to hold the image. */ + dest->image = (*cinfo->mem->request_virt_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, + (JDIMENSION) (cinfo->output_width * cinfo->output_components), + cinfo->output_height, (JDIMENSION) 1); + + return (djpeg_dest_ptr) dest; +} + +#endif /* RLE_SUPPORTED */ diff --git a/compat/libjpeg/wrtarga.c b/compat/libjpeg/wrtarga.c new file mode 100755 index 0000000..a3b7475 --- /dev/null +++ b/compat/libjpeg/wrtarga.c @@ -0,0 +1,254 @@ +/* + * wrtarga.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * Modified 2015 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to write output images in Targa format. + * + * These routines may need modification for non-Unix environments or + * specialized applications. As they stand, they assume output to + * an ordinary stdio stream. + * + * Based on code contributed by Lee Daniel Crocker. + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ + +#ifdef TARGA_SUPPORTED + + +/* + * To support 12-bit JPEG data, we'd have to scale output down to 8 bits. + * This is not yet implemented. + */ + +#if BITS_IN_JSAMPLE != 8 + Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */ +#endif + +/* + * The output buffer needs to be writable by fwrite(). On PCs, we must + * allocate the buffer in near data space, because we are assuming small-data + * memory model, wherein fwrite() can't reach far memory. If you need to + * process very wide images on a PC, you might have to compile in large-memory + * model, or else replace fwrite() with a putc() loop --- which will be much + * slower. + */ + + +/* Private version of data destination object */ + +typedef struct { + struct djpeg_dest_struct pub; /* public fields */ + + char *iobuffer; /* physical I/O buffer */ + JDIMENSION buffer_width; /* width of one row */ +} tga_dest_struct; + +typedef tga_dest_struct * tga_dest_ptr; + + +LOCAL(void) +write_header (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, int num_colors) +/* Create and write a Targa header */ +{ + char targaheader[18]; + + /* Set unused fields of header to 0 */ + MEMZERO(targaheader, SIZEOF(targaheader)); + + if (num_colors > 0) { + targaheader[1] = 1; /* color map type 1 */ + targaheader[5] = (char) (num_colors & 0xFF); + targaheader[6] = (char) (num_colors >> 8); + targaheader[7] = 24; /* 24 bits per cmap entry */ + } + + targaheader[12] = (char) (cinfo->output_width & 0xFF); + targaheader[13] = (char) (cinfo->output_width >> 8); + targaheader[14] = (char) (cinfo->output_height & 0xFF); + targaheader[15] = (char) (cinfo->output_height >> 8); + targaheader[17] = 0x20; /* Top-down, non-interlaced */ + + if (cinfo->out_color_space == JCS_GRAYSCALE) { + targaheader[2] = 3; /* image type = uncompressed grayscale */ + targaheader[16] = 8; /* bits per pixel */ + } else { /* must be RGB */ + if (num_colors > 0) { + targaheader[2] = 1; /* image type = colormapped RGB */ + targaheader[16] = 8; + } else { + targaheader[2] = 2; /* image type = uncompressed RGB */ + targaheader[16] = 24; + } + } + + if (JFWRITE(dinfo->output_file, targaheader, 18) != (size_t) 18) + ERREXIT(cinfo, JERR_FILE_WRITE); +} + + +/* + * Write some pixel data. + * In this module rows_supplied will always be 1. + */ + +METHODDEF(void) +put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied) +/* used for unquantized full-color output */ +{ + tga_dest_ptr dest = (tga_dest_ptr) dinfo; + register JSAMPROW inptr; + register char * outptr; + register JDIMENSION col; + + inptr = dest->pub.buffer[0]; + outptr = dest->iobuffer; + for (col = cinfo->output_width; col > 0; col--) { + outptr[0] = (char) GETJSAMPLE(inptr[2]); /* RGB to BGR order */ + outptr[1] = (char) GETJSAMPLE(inptr[1]); + outptr[2] = (char) GETJSAMPLE(inptr[0]); + inptr += 3, outptr += 3; + } + (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width); +} + +METHODDEF(void) +put_gray_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied) +/* used for grayscale OR quantized color output */ +{ + tga_dest_ptr dest = (tga_dest_ptr) dinfo; + register JSAMPROW inptr; + register char * outptr; + register JDIMENSION col; + + inptr = dest->pub.buffer[0]; + outptr = dest->iobuffer; + for (col = cinfo->output_width; col > 0; col--) { + *outptr++ = (char) GETJSAMPLE(*inptr++); + } + (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width); +} + + +/* + * Write some demapped pixel data when color quantization is in effect. + * For Targa, this is only applied to grayscale data. + */ + +METHODDEF(void) +put_demapped_gray (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied) +{ + tga_dest_ptr dest = (tga_dest_ptr) dinfo; + register JSAMPROW inptr; + register char * outptr; + register JSAMPROW color_map0 = cinfo->colormap[0]; + register JDIMENSION col; + + inptr = dest->pub.buffer[0]; + outptr = dest->iobuffer; + for (col = cinfo->output_width; col > 0; col--) { + *outptr++ = (char) GETJSAMPLE(color_map0[GETJSAMPLE(*inptr++)]); + } + (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width); +} + + +/* + * Startup: write the file header. + */ + +METHODDEF(void) +start_output_tga (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) +{ + tga_dest_ptr dest = (tga_dest_ptr) dinfo; + int num_colors, i; + FILE *outfile; + + if (cinfo->out_color_space == JCS_GRAYSCALE) { + /* Targa doesn't have a mapped grayscale format, so we will */ + /* demap quantized gray output. Never emit a colormap. */ + write_header(cinfo, dinfo, 0); + if (cinfo->quantize_colors) + dest->pub.put_pixel_rows = put_demapped_gray; + else + dest->pub.put_pixel_rows = put_gray_rows; + } else if (cinfo->out_color_space == JCS_RGB) { + if (cinfo->quantize_colors) { + /* We only support 8-bit colormap indexes, so only 256 colors */ + num_colors = cinfo->actual_number_of_colors; + if (num_colors > 256) + ERREXIT1(cinfo, JERR_TOO_MANY_COLORS, num_colors); + write_header(cinfo, dinfo, num_colors); + /* Write the colormap. Note Targa uses BGR byte order */ + outfile = dest->pub.output_file; + for (i = 0; i < num_colors; i++) { + putc(GETJSAMPLE(cinfo->colormap[2][i]), outfile); + putc(GETJSAMPLE(cinfo->colormap[1][i]), outfile); + putc(GETJSAMPLE(cinfo->colormap[0][i]), outfile); + } + dest->pub.put_pixel_rows = put_gray_rows; + } else { + write_header(cinfo, dinfo, 0); + dest->pub.put_pixel_rows = put_pixel_rows; + } + } else { + ERREXIT(cinfo, JERR_TGA_COLORSPACE); + } +} + + +/* + * Finish up at the end of the file. + */ + +METHODDEF(void) +finish_output_tga (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) +{ + /* Make sure we wrote the output file OK */ + fflush(dinfo->output_file); + if (ferror(dinfo->output_file)) + ERREXIT(cinfo, JERR_FILE_WRITE); +} + + +/* + * The module selection routine for Targa format output. + */ + +GLOBAL(djpeg_dest_ptr) +jinit_write_targa (j_decompress_ptr cinfo) +{ + tga_dest_ptr dest; + + /* Create module interface object, fill in method pointers */ + dest = (tga_dest_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(tga_dest_struct)); + dest->pub.start_output = start_output_tga; + dest->pub.finish_output = finish_output_tga; + + /* Calculate output image dimensions so we can allocate space */ + jpeg_calc_output_dimensions(cinfo); + + /* Create I/O buffer. Note we make this near on a PC. */ + dest->buffer_width = cinfo->output_width * cinfo->output_components; + dest->iobuffer = (char *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (size_t) (dest->buffer_width * SIZEOF(char))); + + /* Create decompressor output buffer. */ + dest->pub.buffer = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, dest->buffer_width, (JDIMENSION) 1); + dest->pub.buffer_height = 1; + + return &dest->pub; +} + +#endif /* TARGA_SUPPORTED */ diff --git a/compat/libpng/ANNOUNCE b/compat/libpng/ANNOUNCE new file mode 100755 index 0000000..b5ba483 --- /dev/null +++ b/compat/libpng/ANNOUNCE @@ -0,0 +1,60 @@ +Libpng 1.6.21 - January 15, 2016 + +This is a public release of libpng, intended for use in production codes. + +Files available for download: + +Source files with LF line endings (for Unix/Linux) and with a +"configure" script + + libpng-1.6.21.tar.xz (LZMA-compressed, recommended) + libpng-1.6.21.tar.gz + +Source files with CRLF line endings (for Windows), without the +"configure" script + + /scratch/glennrp/Libpng16/lpng1621.7z (LZMA-compressed, recommended) + /scratch/glennrp/Libpng16/lpng1621.zip + +Other information: + + libpng-1.6.21-README.txt + libpng-1.6.21-LICENSE.txt + libpng-1.6.21-*.asc (armored detached GPG signatures) + +Changes since the last public release (1.6.20): + + Fixed syntax "$(command)" in tests/pngstest that some shells other than + bash could not parse (Bug report by Nelson Beebe). Use `command` instead. + Moved png_check_keyword() from pngwutil.c to pngset.c + Removed LE/BE dependencies in pngvalid, to 'fix' the current problem + in the BigEndian tests by not testing it, making the BE code the same + as the LE version. + Fixes to pngvalid for various reduced build configurations (eliminate unused + statics) and a fix for the case in rgb_to_gray when the digitize option + reduces graylo to 0, producing a large error. + Widened the 'limit' check on the internally calculated error limits in + the 'DIGITIZE' case (the code used prior to 1.7 for rgb_to_gray error + checks) and changed the check to only operate in non-release builds + (base build type not RC or RELEASE.) + Fixed undefined behavior in pngvalid.c, undefined because + (png_byte) << shift is undefined if it changes the signed bit + (because png_byte is promoted to int). The libpng exported functions + png_get_uint_32 and png_get_uint_16 handle this. (Bug reported by + David Drysdale as a result of reports from UBSAN in clang 3.8). + This changes pngvalid to use BE random numbers; this used to produce + errors but these should not be fixed as a result of the previous changes. + In projects/vstudio, combined readme.txt and WARNING into README.txt + Relocated assert() in contrib/tools/pngfix.c, bug found by American + Fuzzy Lop, reported by Brian Carpenter. + Marked 'limit' UNUSED in transform_range_check(). This only affects + release builds. + Worked around a false-positive Coverity issue in pngvalid.c. + +Send comments/corrections/commendations to png-mng-implement at lists.sf.net +(subscription required; visit +https://lists.sourceforge.net/lists/listinfo/png-mng-implement +to subscribe) +or to glennrp at users.sourceforge.net + +Glenn R-P diff --git a/compat/libpng/CHANGES b/compat/libpng/CHANGES new file mode 100755 index 0000000..d78ede6 --- /dev/null +++ b/compat/libpng/CHANGES @@ -0,0 +1,5494 @@ +#if 0 +CHANGES - changes for libpng + +version 0.1 [March 29, 1995] + initial work-in-progress release + +version 0.2 [April 1, 1995] + added reader into png.h + fixed small problems in stub file + +version 0.3 [April 8, 1995] + added pull reader + split up pngwrite.c to several files + added pnglib.txt + added example.c + cleaned up writer, adding a few new transformations + fixed some bugs in writer + interfaced with zlib 0.5 + added K&R support + added check for 64 KB blocks for 16 bit machines + +version 0.4 [April 26, 1995] + cleaned up code and commented code + simplified time handling into png_time + created png_color_16 and png_color_8 to handle color needs + cleaned up color type defines + fixed various bugs + made various names more consistent + interfaced with zlib 0.71 + cleaned up zTXt reader and writer (using zlib's Reset functions) + split transformations into pngrtran.c and pngwtran.c + +version 0.5 [April 30, 1995] + interfaced with zlib 0.8 + fixed many reading and writing bugs + saved using 3 spaces instead of tabs + +version 0.6 [May 1, 1995] + first beta release + added png_large_malloc() and png_large_free() + added png_size_t + cleaned up some compiler warnings + added png_start_read_image() + +version 0.7 [June 24, 1995] + cleaned up lots of bugs + finished dithering and other stuff + added test program + changed name from pnglib to libpng + +version 0.71 [June 26, 1995] + changed pngtest.png for zlib 0.93 + fixed error in libpng.txt and example.c + +version 0.8 [August 20, 1995] + cleaned up some bugs + added png_set_filler() + split up pngstub.c into pngmem.c, pngio.c, and pngerror.c + added #define's to remove unwanted code + moved png_info_init() to png.c + added old_size into png_realloc() + added functions to manually set filtering and compression info + changed compression parameters based on image type + optimized filter selection code + added version info + changed external functions passing floats to doubles (k&r problems?) + put all the configurable stuff in pngconf.h + enabled png_set_shift to work with paletted images on read + added png_read_update_info() - updates info structure with transformations + +Version 0.81 [August, 1995] + incorporated Tim Wegner's medium model code (thanks, Tim) + +Version 0.82 [September, 1995] + [unspecified changes] + +Version 0.85 [December, 1995] + added more medium model code (almost everything's a far) + added i/o, error, and memory callback functions + fixed some bugs (16-bit, 4-bit interlaced, etc.) + added first run progressive reader (barely tested) + +Version 0.86 [January, 1996] + fixed bugs + improved documentation + +Version 0.87 [January, 1996] + fixed medium model bugs + fixed other bugs introduced in 0.85 and 0.86 + added some minor documentation + +Version 0.88 [January, 1996] + fixed progressive bugs + replaced tabs with spaces + cleaned up documentation + added callbacks for read/write and warning/error functions + +Version 0.89 [June 5, 1996] + Added new initialization API to make libpng work better with shared libs + we now have png_create_read_struct(), png_create_write_struct(), + png_create_info_struct(), png_destroy_read_struct(), and + png_destroy_write_struct() instead of the separate calls to + malloc and png_read_init(), png_info_init(), and png_write_init() + Changed warning/error callback functions to fix bug - this means you + should use the new initialization API if you were using the old + png_set_message_fn() calls, and that the old API no longer exists + so that people are aware that they need to change their code + Changed filter selection API to allow selection of multiple filters + since it didn't work in previous versions of libpng anyways + Optimized filter selection code + Fixed png_set_background() to allow using an arbitrary RGB color for + paletted images + Fixed gamma and background correction for paletted images, so + png_correct_palette is not needed unless you are correcting an + external palette (you will need to #define PNG_CORRECT_PALETTE_SUPPORTED + in pngconf.h) - if nobody uses this, it may disappear in the future. + Fixed bug with Borland 64K memory allocation (Alexander Lehmann) + Fixed bug in interlace handling (Smarasderagd, I think) + Added more error checking for writing and image to reduce invalid files + Separated read and write functions so that they won't both be linked + into a binary when only reading or writing functionality is used + New pngtest image also has interlacing and zTXt + Updated documentation to reflect new API + +Version 0.89c [June 17, 1996] + Bug fixes. + +Version 0.90 [January, 1997] + Made CRC errors/warnings on critical and ancillary chunks configurable + libpng will use the zlib CRC routines by (compile-time) default + Changed DOS small/medium model memory support - needs zlib 1.04 (Tim Wegner) + Added external C++ wrapper statements to png.h (Gilles Dauphin) + Allow PNG file to be read when some or all of file signature has already + been read from the beginning of the stream. ****This affects the size + of info_struct and invalidates all programs that use a shared libpng**** + Fixed png_filler() declarations + Fixed? background color conversions + Fixed order of error function pointers to match documentation + Current chunk name is now available in png_struct to reduce the number + of nearly identical error messages (will simplify multi-lingual + support when available) + Try to get ready for unknown-chunk callback functions: + - previously read critical chunks are flagged, so the chunk handling + routines can determine if the chunk is in the right place + - all chunk handling routines have the same prototypes, so we will + be able to handle all chunks via a callback mechanism + Try to fix Linux "setjmp" buffer size problems + Removed png_large_malloc, png_large_free, and png_realloc functions. + +Version 0.95 [March, 1997] + Fixed bug in pngwutil.c allocating "up_row" twice and "avg_row" never + Fixed bug in PNG file signature compares when start != 0 + Changed parameter type of png_set_filler(...filler...) from png_byte + to png_uint_32 + Added test for MACOS to ensure that both math.h and fp.h are not #included + Added macros for libpng to be compiled as a Windows DLL (Andreas Kupries) + Added "packswap" transformation, which changes the endianness of + packed-pixel bytes (Kevin Bracey) + Added "strip_alpha" transformation, which removes the alpha channel of + input images without using it (not necessarily a good idea) + Added "swap_alpha" transformation, which puts the alpha channel in front + of the color bytes instead of after + Removed all implicit variable tests which assume NULL == 0 (I think) + Changed several variables to "png_size_t" to show 16/32-bit limitations + Added new pCAL chunk read/write support + Added experimental filter selection weighting (Greg Roelofs) + Removed old png_set_rgbx() and png_set_xrgb() functions that have been + obsolete for about 2 years now (use png_set_filler() instead) + Added macros to read 16- and 32-bit ints directly from buffer, to be + used only on those systems that support it (namely PowerPC and 680x0) + With some testing, this may become the default for MACOS/PPC systems. + Only calculate CRC on data if we are going to use it + Added macros for zTXt compression type PNG_zTXt_COMPRESSION_??? + Added macros for simple libpng debugging output selectable at compile time + Removed PNG_READ_END_MODE in progressive reader (Smarasderagd) + More description of info_struct in libpng.txt and png.h + More instructions in example.c + More chunk types tested in pngtest.c + Renamed pngrcb.c to pngset.c, and all png_read_ functions to be + png_set_. We now have corresponding png_get_ + functions in pngget.c to get information in info_ptr. This isolates + the application from the internal organization of png_info_struct + (good for shared library implementations). + +Version 0.96 [May, 1997] + Fixed serious bug with < 8bpp images introduced in 0.95 + Fixed 256-color transparency bug (Greg Roelofs) + Fixed up documentation (Greg Roelofs, Laszlo Nyul) + Fixed "error" in pngconf.h for Linux setjmp() behavior + Fixed DOS medium model support (Tim Wegner) + Fixed png_check_keyword() for case with error in static string text + Added read of CRC after IEND chunk for embedded PNGs (Laszlo Nyul) + Added typecasts to quiet compiler errors + Added more debugging info + +Version 0.97 [January, 1998] + Removed PNG_USE_OWN_CRC capability + Relocated png_set_crc_action from pngrutil.c to pngrtran.c + Fixed typecasts of "new_key", etc. (Andreas Dilger) + Added RFC 1152 [sic] date support + Fixed bug in gamma handling of 4-bit grayscale + Added 2-bit grayscale gamma handling (Glenn R-P) + Added more typecasts. 65536L becomes (png_uint_32)65536L, etc. (Glenn R-P) + Minor corrections in libpng.txt + Added simple sRGB support (Glenn R-P) + Easier conditional compiling, e.g., + define PNG_READ/WRITE_NOT_FULLY_SUPPORTED; + all configurable options can be selected from command-line instead + of having to edit pngconf.h (Glenn R-P) + Fixed memory leak in pngwrite.c (free info_ptr->text) (Glenn R-P) + Added more conditions for png_do_background, to avoid changing + black pixels to background when a background is supplied and + no pixels are transparent + Repaired PNG_NO_STDIO behavior + Tested NODIV support and made it default behavior (Greg Roelofs) + Added "-m" option and PNGTEST_DEBUG_MEMORY to pngtest (John Bowler) + Regularized version numbering scheme and bumped shared-library major + version number to 2 to avoid problems with libpng 0.89 apps + (Greg Roelofs) + +Version 0.98 [January, 1998] + Cleaned up some typos in libpng.txt and in code documentation + Fixed memory leaks in pCAL chunk processing (Glenn R-P and John Bowler) + Cosmetic change "display_gamma" to "screen_gamma" in pngrtran.c + Changed recommendation about file_gamma for PC images to .51 from .45, + in example.c and libpng.txt, added comments to distinguish between + screen_gamma, viewing_gamma, and display_gamma. + Changed all references to RFC1152 to read RFC1123 and changed the + PNG_TIME_RFC1152_SUPPORTED macro to PNG_TIME_RFC1123_SUPPORTED + Added png_invert_alpha capability (Glenn R-P -- suggestion by Jon Vincent) + Changed srgb_intent from png_byte to int to avoid compiler bugs + +Version 0.99 [January 30, 1998] + Free info_ptr->text instead of end_info_ptr->text in pngread.c (John Bowler) + Fixed a longstanding "packswap" bug in pngtrans.c + Fixed some inconsistencies in pngconf.h that prevented compiling with + PNG_READ_GAMMA_SUPPORTED and PNG_READ_hIST_SUPPORTED undefined + Fixed some typos and made other minor rearrangement of libpng.txt (Andreas) + Changed recommendation about file_gamma for PC images to .50 from .51 in + example.c and libpng.txt, and changed file_gamma for sRGB images to .45 + Added a number of functions to access information from the png structure + png_get_image_height(), etc. (Glenn R-P, suggestion by Brad Pettit) + Added TARGET_MACOS similar to zlib-1.0.8 + Define PNG_ALWAYS_EXTERN when __MWERKS__ && WIN32 are defined + Added type casting to all png_malloc() function calls + +Version 0.99a [January 31, 1998] + Added type casts and parentheses to all returns that return a value.(Tim W.) + +Version 0.99b [February 4, 1998] + Added type cast png_uint_32 on malloc function calls where needed. + Changed type of num_hist from png_uint_32 to int (same as num_palette). + Added checks for rowbytes overflow, in case png_size_t is less than 32 bits. + Renamed makefile.elf to makefile.lnx. + +Version 0.99c [February 7, 1998] + More type casting. Removed erroneous overflow test in pngmem.c. + Added png_buffered_memcpy() and png_buffered_memset(), apply them to rowbytes. + Added UNIX manual pages libpng.3 (incorporating libpng.txt) and png.5. + +Version 0.99d [February 11, 1998] + Renamed "far_to_near()" "png_far_to_near()" + Revised libpng.3 + Version 99c "buffered" operations didn't work as intended. Replaced them + with png_memcpy_check() and png_memset_check(). + Added many "if (png_ptr == NULL) return" to quell compiler warnings about + unused png_ptr, mostly in pngget.c and pngset.c. + Check for overlength tRNS chunk present when indexed-color PLTE is read. + Cleaned up spelling errors in libpng.3/libpng.txt + Corrected a problem with png_get_tRNS() which returned undefined trans array + +Version 0.99e [February 28, 1998] + Corrected png_get_tRNS() again. + Add parentheses for easier reading of pngget.c, fixed "||" should be "&&". + Touched up example.c to make more of it compileable, although the entire + file still can't be compiled (Willem van Schaik) + Fixed a bug in png_do_shift() (Bryan Tsai) + Added a space in png.h prototype for png_write_chunk_start() + Replaced pngtest.png with one created with zlib 1.1.1 + Changed pngtest to report PASS even when file size is different (Jean-loup G.) + Corrected some logic errors in png_do_invert_alpha() (Chris Patterson) + +Version 0.99f [March 5, 1998] + Corrected a bug in pngpread() introduced in version 99c (Kevin Bracey) + Moved makefiles into a "scripts" directory, and added INSTALL instruction file + Added makefile.os2 and pngos2.def (A. Zabolotny) and makefile.s2x (W. Sebok) + Added pointers to "note on libpng versions" in makefile.lnx and README + Added row callback feature when reading and writing nonprogressive rows + and added a test of this feature in pngtest.c + Added user transform callbacks, with test of the feature in pngtest.c + +Version 0.99g [March 6, 1998, morning] + Minor changes to pngtest.c to suppress compiler warnings. + Removed "beta" language from documentation. + +Version 0.99h [March 6, 1998, evening] + Minor changes to previous minor changes to pngtest.c + Changed PNG_READ_NOT_FULLY_SUPPORTED to PNG_READ_TRANSFORMS_NOT_SUPPORTED + and added PNG_PROGRESSIVE_READ_NOT_SUPPORTED macro + Added user transform capability + +Version 1.00 [March 7, 1998] + Changed several typedefs in pngrutil.c + Added makefile.wat (Pawel Mrochen), updated makefile.tc3 (Willem van Schaik) + Replaced "while(1)" with "for(;;)" + Added PNGARG() to prototypes in pngtest.c and removed some prototypes + Updated some of the makefiles (Tom Lane) + Changed some typedefs (s_start, etc.) in pngrutil.c + Fixed dimensions of "short_months" array in pngwrite.c + Replaced ansi2knr.c with the one from jpeg-v6 + +Version 1.0.0 [March 8, 1998] + Changed name from 1.00 to 1.0.0 (Adam Costello) + Added smakefile.ppc (with SCOPTIONS.ppc) for Amiga PPC (Andreas Kleinert) + +Version 1.0.0a [March 9, 1998] + Fixed three bugs in pngrtran.c to make gamma+background handling consistent + (Greg Roelofs) + Changed format of the PNG_LIBPNG_VER integer to xyyzz instead of xyz + for major, minor, and bugfix releases. This is 10001. (Adam Costello, + Tom Lane) + Make months range from 1-12 in png_convert_to_rfc1123 + +Version 1.0.0b [March 13, 1998] + Quieted compiler complaints about two empty "for" loops in pngrutil.c + Minor changes to makefile.s2x + Removed #ifdef/#endif around a png_free() in pngread.c + +Version 1.0.1 [March 14, 1998] + Changed makefile.s2x to reduce security risk of using a relative pathname + Fixed some typos in the documentation (Greg). + Fixed a problem with value of "channels" returned by png_read_update_info() + +Version 1.0.1a [April 21, 1998] + Optimized Paeth calculations by replacing abs() function calls with intrinsics + plus other loop optimizations. Improves avg decoding speed by about 20%. + Commented out i386istic "align" compiler flags in makefile.lnx. + Reduced the default warning level in some makefiles, to make them consistent. + Removed references to IJG and JPEG in the ansi2knr.c copyright statement. + Fixed a bug in png_do_strip_filler with XXRRGGBB => RRGGBB transformation. + Added grayscale and 16-bit capability to png_do_read_filler(). + Fixed a bug in pngset.c, introduced in version 0.99c, that sets rowbytes + too large when writing an image with bit_depth < 8 (Bob Dellaca). + Corrected some bugs in the experimental weighted filtering heuristics. + Moved a misplaced pngrutil code block that truncates tRNS if it has more + than num_palette entries -- test was done before num_palette was defined. + Fixed a png_convert_to_rfc1123() bug that converts day 31 to 0 (Steve Eddins). + Changed compiler flags in makefile.wat for better optimization + (Pawel Mrochen). + +Version 1.0.1b [May 2, 1998] + Relocated png_do_gray_to_rgb() within png_do_read_transformations() (Greg). + Relocated the png_composite macros from pngrtran.c to png.h (Greg). + Added makefile.sco (contributed by Mike Hopkirk). + Fixed two bugs (missing definitions of "istop") introduced in libpng-1.0.1a. + Fixed a bug in pngrtran.c that would set channels=5 under some circumstances. + More work on the Paeth-filtering, achieving imperceptible speedup + (A Kleinert). + More work on loop optimization which may help when compiled with C++ + compilers. + Added warnings when people try to use transforms they've defined out. + Collapsed 4 "i" and "c" loops into single "i" loops in pngrtran and pngwtran. + Revised paragraph about png_set_expand() in libpng.txt and libpng.3 (Greg) + +Version 1.0.1c [May 11, 1998] + Fixed a bug in pngrtran.c (introduced in libpng-1.0.1a) where the masks for + filler bytes should have been 0xff instead of 0xf. + Added max_pixel_depth=32 in pngrutil.c when using FILLER with palette images. + Moved PNG_WRITE_WEIGHTED_FILTER_SUPPORTED and PNG_WRITE_FLUSH_SUPPORTED + out of the PNG_WRITE_TRANSFORMS_NOT_SUPPORTED block of pngconf.h + Added "PNG_NO_WRITE_TRANSFORMS" etc., as alternatives for *_NOT_SUPPORTED, + for consistency, in pngconf.h + Added individual "ifndef PNG_NO_[CAPABILITY]" in pngconf.h to make it easier + to remove unwanted capabilities via the compile line + Made some corrections to grammar (which, it's) in documentation (Greg). + Corrected example.c, use of row_pointers in png_write_image(). + +Version 1.0.1d [May 24, 1998] + Corrected several statements that used side effects illegally in pngrutil.c + and pngtrans.c, that were introduced in version 1.0.1b + Revised png_read_rows() to avoid repeated if-testing for NULL (A Kleinert) + More corrections to example.c, use of row_pointers in png_write_image() + and png_read_rows(). + Added pngdll.mak and pngdef.pas to scripts directory, contributed by + Bob Dellaca, to make a png32bd.dll with Borland C++ 4.5 + Fixed error in example.c with png_set_text: num_text is 3, not 2 (Guido V.) + Changed several loops from count-down to count-up, for consistency. + +Version 1.0.1e [June 6, 1998] + Revised libpng.txt and libpng.3 description of png_set_read|write_fn(), and + added warnings when people try to set png_read_fn and png_write_fn in + the same structure. + Added a test such that png_do_gamma will be done when num_trans==0 + for truecolor images that have defined a background. This corrects an + error that was introduced in libpng-0.90 that can cause gamma processing + to be skipped. + Added tests in png.h to include "trans" and "trans_values" in structures + when PNG_READ_BACKGROUND_SUPPORTED or PNG_READ_EXPAND_SUPPORTED is defined. + Add png_free(png_ptr->time_buffer) in png_destroy_read_struct() + Moved png_convert_to_rfc_1123() from pngwrite.c to png.c + Added capability for user-provided malloc_fn() and free_fn() functions, + and revised pngtest.c to demonstrate their use, replacing the + PNGTEST_DEBUG_MEM feature. + Added makefile.w32, for Microsoft C++ 4.0 and later (Tim Wegner). + +Version 1.0.2 [June 14, 1998] + Fixed two bugs in makefile.bor . + +Version 1.0.2a [December 30, 1998] + Replaced and extended code that was removed from png_set_filler() in 1.0.1a. + Fixed a bug in png_do_filler() that made it fail to write filler bytes in + the left-most pixel of each row (Kevin Bracey). + Changed "static pngcharp tIME_string" to "static char tIME_string[30]" + in pngtest.c (Duncan Simpson). + Fixed a bug in pngtest.c that caused pngtest to try to write a tIME chunk + even when no tIME chunk was present in the source file. + Fixed a problem in pngrutil.c: gray_to_rgb didn't always work with 16-bit. + Fixed a problem in png_read_push_finish_row(), which would not skip some + passes that it should skip, for images that are less than 3 pixels high. + Interchanged the order of calls to png_do_swap() and png_do_shift() + in pngwtran.c (John Cromer). + Added #ifdef PNG_DEBUG/#endif surrounding use of PNG_DEBUG in png.h . + Changed "bad adaptive filter type" from error to warning in pngrutil.c . + Fixed a documentation error about default filtering with 8-bit indexed-color. + Separated the PNG_NO_STDIO macro into PNG_NO_STDIO and PNG_NO_CONSOLE_IO + (L. Peter Deutsch). + Added png_set_rgb_to_gray() and png_get_rgb_to_gray_status() functions. + Added png_get_copyright() and png_get_header_version() functions. + Revised comments on png_set_progressive_read_fn() in libpng.txt and example.c + Added information about debugging in libpng.txt and libpng.3 . + Changed "ln -sf" to "ln -s -f" in makefile.s2x, makefile.lnx, and + makefile.sco. + Removed lines after Dynamic Dependencies" in makefile.aco . + Revised makefile.dec to make a shared library (Jeremie Petit). + Removed trailing blanks from all files. + +Version 1.0.2a [January 6, 1999] + Removed misplaced #endif and #ifdef PNG_NO_EXTERN near the end of png.h + Added "if" tests to silence complaints about unused png_ptr in png.h and png.c + Changed "check_if_png" function in example.c to return true (nonzero) if PNG. + Changed libpng.txt to demonstrate png_sig_cmp() instead of png_check_sig() + which is obsolete. + +Version 1.0.3 [January 14, 1999] + Added makefile.hux, for Hewlett Packard HPUX 10.20 and 11.00 (Jim Rice) + Added a statement of Y2K compliance in png.h, libpng.3, and Y2KINFO. + +Version 1.0.3a [August 12, 1999] + Added check for PNG_READ_INTERLACE_SUPPORTED in pngread.c; issue a warning + if an attempt is made to read an interlaced image when it's not supported. + Added check if png_ptr->trans is defined before freeing it in pngread.c + Modified the Y2K statement to include versions back to version 0.71 + Fixed a bug in the check for valid IHDR bit_depth/color_types in pngrutil.c + Modified makefile.wat (added -zp8 flag, ".symbolic", changed some comments) + Replaced leading blanks with tab characters in makefile.hux + Changed "dworkin.wustl.edu" to "ccrc.wustl.edu" in various documents. + Changed (float)red and (float)green to (double)red, (double)green + in png_set_rgb_to_gray() to avoid "promotion" problems in AIX. + Fixed a bug in pngconf.h that omitted when PNG_DEBUG==0 (K Bracey). + Reformatted libpng.3 and libpngpf.3 with proper fonts (script by J. vanZandt). + Updated documentation to refer to the PNG-1.2 specification. + Removed ansi2knr.c and left pointers to the latest source for ansi2knr.c + in makefile.knr, INSTALL, and README (L. Peter Deutsch) + Fixed bugs in calculation of the length of rowbytes when adding alpha + channels to 16-bit images, in pngrtran.c (Chris Nokleberg) + Added function png_set_user_transform_info() to store user_transform_ptr, + user_depth, and user_channels into the png_struct, and a function + png_get_user_transform_ptr() to retrieve the pointer (Chris Nokleberg) + Added function png_set_empty_plte_permitted() to make libpng useable + in MNG applications. + Corrected the typedef for png_free_ptr in png.h (Jesse Jones). + Correct gamma with srgb is 45455 instead of 45000 in pngrutil.c, to be + consistent with PNG-1.2, and allow variance of 500 before complaining. + Added assembler code contributed by Intel in file pngvcrd.c and modified + makefile.w32 to use it (Nirav Chhatrapati, INTEL Corporation, + Gilles Vollant) + Changed "ln -s -f" to "ln -f -s" in the makefiles to make Solaris happy. + Added some aliases for png_set_expand() in pngrtran.c, namely + png_set_expand_PLTE(), png_set_expand_depth(), and png_set_expand_tRNS() + (Greg Roelofs, in "PNG: The Definitive Guide"). + Added makefile.beo for BEOS on X86, contributed by Sander Stok. + +Version 1.0.3b [August 26, 1999] + Replaced 2147483647L several places with PNG_MAX_UINT macro, defined in png.h + Changed leading blanks to tabs in all makefiles. + Define PNG_USE_PNGVCRD in makefile.w32, to get MMX assembler code. + Made alternate versions of png_set_expand() in pngrtran.c, namely + png_set_gray_1_2_4_to_8, png_set_palette_to_rgb, and png_set_tRNS_to_alpha + (Greg Roelofs, in "PNG: The Definitive Guide"). Deleted the 1.0.3a aliases. + Relocated start of 'extern "C"' block in png.h so it doesn't include pngconf.h + Revised calculation of num_blocks in pngmem.c to avoid a potentially + negative shift distance, whose results are undefined in the C language. + Added a check in pngset.c to prevent writing multiple tIME chunks. + Added a check in pngwrite.c to detect invalid small window_bits sizes. + +Version 1.0.3d [September 4, 1999] + Fixed type casting of igamma in pngrutil.c + Added new png_expand functions to scripts/pngdef.pas and pngos2.def + Added a demo read_user_transform_fn that examines the row filters in pngtest.c + +Version 1.0.4 [September 24, 1999, not distributed publicly] + Define PNG_ALWAYS_EXTERN in pngconf.h if __STDC__ is defined + Delete #define PNG_INTERNAL and include "png.h" from pngasmrd.h + Made several minor corrections to pngtest.c + Renamed the makefiles with longer but more user friendly extensions. + Copied the PNG copyright and license to a separate LICENSE file. + Revised documentation, png.h, and example.c to remove reference to + "viewing_gamma" which no longer appears in the PNG specification. + Revised pngvcrd.c to use MMX code for interlacing only on the final pass. + Updated pngvcrd.c to use the faster C filter algorithms from libpng-1.0.1a + Split makefile.win32vc into two versions, makefile.vcawin32 (uses MMX + assembler code) and makefile.vcwin32 (doesn't). + Added a CPU timing report to pngtest.c (enabled by defining PNGTEST_TIMING) + Added a copy of pngnow.png to the distribution. + +Version 1.0.4a [September 25, 1999] + Increase max_pixel_depth in pngrutil.c if a user transform needs it. + Changed several division operations to right-shifts in pngvcrd.c + +Version 1.0.4b [September 30, 1999] + Added parentheses in line 3732 of pngvcrd.c + Added a comment in makefile.linux warning about buggy -O3 in pgcc 2.95.1 + +Version 1.0.4c [October 1, 1999] + Added a "png_check_version" function in png.c and pngtest.c that will generate + a helpful compiler error if an old png.h is found in the search path. + Changed type of png_user_transform_depth|channels from int to png_byte. + Added "Libpng is OSI Certified Open Source Software" statement to png.h + +Version 1.0.4d [October 6, 1999] + Changed 0.45 to 0.45455 in png_set_sRGB() + Removed unused PLTE entries from pngnow.png + Re-enabled some parts of pngvcrd.c (png_combine_row) that work properly. + +Version 1.0.4e [October 10, 1999] + Fixed sign error in pngvcrd.c (Greg Roelofs) + Replaced some instances of memcpy with simple assignments in pngvcrd (GR-P) + +Version 1.0.4f [October 15, 1999] + Surrounded example.c code with #if 0 .. #endif to prevent people from + inadvertently trying to compile it. + Changed png_get_header_version() from a function to a macro in png.h + Added type casting mostly in pngrtran.c and pngwtran.c + Removed some pointless "ptr = NULL" in pngmem.c + Added a "contrib" directory containing the source code from Greg's book. + +Version 1.0.5 [October 15, 1999] + Minor editing of the INSTALL and README files. + +Version 1.0.5a [October 23, 1999] + Added contrib/pngsuite and contrib/pngminus (Willem van Schaik) + Fixed a typo in the png_set_sRGB() function call in example.c (Jan Nijtmans) + Further optimization and bugfix of pngvcrd.c + Revised pngset.c so that it does not allocate or free memory in the user's + text_ptr structure. Instead, it makes its own copy. + Created separate write_end_info_struct in pngtest.c for a more severe test. + Added code in pngwrite.c to free info_ptr->text[i].key to stop a memory leak. + +Version 1.0.5b [November 23, 1999] + Moved PNG_FLAG_HAVE_CHUNK_HEADER, PNG_FLAG_BACKGROUND_IS_GRAY and + PNG_FLAG_WROTE_tIME from flags to mode. + Added png_write_info_before_PLTE() function. + Fixed some typecasting in contrib/gregbook/*.c + Updated scripts/makevms.com and added makevms.com to contrib/gregbook + and contrib/pngminus (Martin Zinser) + +Version 1.0.5c [November 26, 1999] + Moved png_get_header_version from png.h to png.c, to accommodate ansi2knr. + Removed all global arrays (according to PNG_NO_GLOBAL_ARRAYS macro), to + accommodate making DLL's: Moved usr_png_ver from global variable to function + png_get_header_ver() in png.c. Moved png_sig to png_sig_bytes in png.c and + eliminated use of png_sig in pngwutil.c. Moved the various png_CHNK arrays + into pngtypes.h. Eliminated use of global png_pass arrays. Declared the + png_CHNK and png_pass arrays to be "const". Made the global arrays + available to applications (although none are used in libpng itself) when + PNG_NO_GLOBAL_ARRAYS is not defined or when PNG_GLOBAL_ARRAYS is defined. + Removed some extraneous "-I" from contrib/pngminus/makefile.std + Changed the PNG_sRGB_INTENT macros in png.h to be consistent with PNG-1.2. + Change PNG_SRGB_INTENT to PNG_sRGB_INTENT in libpng.txt and libpng.3 + +Version 1.0.5d [November 29, 1999] + Add type cast (png_const_charp) two places in png.c + Eliminated pngtypes.h; use macros instead to declare PNG_CHNK arrays. + Renamed "PNG_GLOBAL_ARRAYS" to "PNG_USE_GLOBAL_ARRAYS" and made available + to applications a macro "PNG_USE_LOCAL_ARRAYS". + comment out (with #ifdef) all the new declarations when + PNG_USE_GLOBAL_ARRAYS is defined. + Added PNG_EXPORT_VAR macro to accommodate making DLL's. + +Version 1.0.5e [November 30, 1999] + Added iCCP, iTXt, and sPLT support; added "lang" member to the png_text + structure; refactored the inflate/deflate support to make adding new chunks + with trailing compressed parts easier in the future, and added new functions + png_free_iCCP, png_free_pCAL, png_free_sPLT, png_free_text, png_get_iCCP, + png_get_spalettes, png_set_iCCP, png_set_spalettes (Eric S. Raymond). + NOTE: Applications that write text chunks MUST define png_text->lang + before calling png_set_text(). It must be set to NULL if you want to + write tEXt or zTXt chunks. If you want your application to be able to + run with older versions of libpng, use + + #ifdef PNG_iTXt_SUPPORTED + png_text[i].lang = NULL; + #endif + + Changed png_get_oFFs() and png_set_oFFs() to use signed rather than unsigned + offsets (Eric S. Raymond). + Combined PNG_READ_cHNK_SUPPORTED and PNG_WRITE_cHNK_SUPPORTED macros into + PNG_cHNK_SUPPORTED and combined the three types of PNG_text_SUPPORTED + macros, leaving the separate macros also available. + Removed comments on #endifs at the end of many short, non-nested #if-blocks. + +Version 1.0.5f [December 6, 1999] + Changed makefile.solaris to issue a warning about potential problems when + the ucb "ld" is in the path ahead of the ccs "ld". + Removed "- [date]" from the "synopsis" line in libpng.3 and libpngpf.3. + Added sCAL chunk support (Eric S. Raymond). + +Version 1.0.5g [December 7, 1999] + Fixed "png_free_spallettes" typo in png.h + Added code to handle new chunks in pngpread.c + Moved PNG_CHNK string macro definitions outside of PNG_NO_EXTERN block + Added "translated_key" to png_text structure and png_write_iTXt(). + Added code in pngwrite.c to work around a newly discovered zlib bug. + +Version 1.0.5h [December 10, 1999] + NOTE: regarding the note for version 1.0.5e, the following must also + be included in your code: + png_text[i].translated_key = NULL; + Unknown chunk handling is now supported. + Option to eliminate all floating point support was added. Some new + fixed-point functions such as png_set_gAMA_fixed() were added. + Expanded tabs and removed trailing blanks in source files. + +Version 1.0.5i [December 13, 1999] + Added some type casts to silence compiler warnings. + Renamed "png_free_spalette" to "png_free_spalettes" for consistency. + Removed leading blanks from a #define in pngvcrd.c + Added some parameters to the new png_set_keep_unknown_chunks() function. + Added a test for up->location != 0 in the first instance of writing + unknown chunks in pngwrite.c + Changed "num" to "i" in png_free_spalettes() and png_free_unknowns() to + prevent recursion. + Added png_free_hIST() function. + Various patches to fix bugs in the sCAL and integer cHRM processing, + and to add some convenience macros for use with sCAL. + +Version 1.0.5j [December 21, 1999] + Changed "unit" parameter of png_write_sCAL from png_byte to int, to work + around buggy compilers. + Added new type "png_fixed_point" for integers that hold float*100000 values + Restored backward compatibility of tEXt/zTXt chunk processing: + Restored the first four members of png_text to the same order as v.1.0.5d. + Added members "lang_key" and "itxt_length" to png_text struct. Set + text_length=0 when "text" contains iTXt data. Use the "compression" + member to distinguish among tEXt/zTXt/iTXt types. Added + PNG_ITXT_COMPRESSION_NONE (1) and PNG_ITXT_COMPRESSION_zTXt(2) macros. + The "Note" above, about backward incompatibility of libpng-1.0.5e, no + longer applies. + Fixed png_read|write_iTXt() to read|write parameters in the right order, + and to write the iTXt chunk after IDAT if it appears in the end_ptr. + Added pnggccrd.c, version of pngvcrd.c Intel assembler for gcc (Greg Roelofs) + Reversed the order of trying to write floating-point and fixed-point gAMA. + +Version 1.0.5k [December 27, 1999] + Added many parentheses, e.g., "if (a && b & c)" becomes "if (a && (b & c))" + Added png_handle_as_unknown() function (Glenn) + Added png_free_chunk_list() function and chunk_list and num_chunk_list members + of png_ptr. + Eliminated erroneous warnings about multiple sPLT chunks and sPLT-after-PLTE. + Fixed a libpng-1.0.5h bug in pngrutil.c that was issuing erroneous warnings + about ignoring incorrect gAMA with sRGB (gAMA was in fact not ignored) + Added png_free_tRNS(); png_set_tRNS() now malloc's its own trans array (ESR). + Define png_get_int_32 when oFFs chunk is supported as well as when pCAL is. + Changed type of proflen from png_int_32 to png_uint_32 in png_get_iCCP(). + +Version 1.0.5l [January 1, 2000] + Added functions png_set_read_user_chunk_fn() and png_get_user_chunk_ptr() + for setting a callback function to handle unknown chunks and for + retrieving the associated user pointer (Glenn). + +Version 1.0.5m [January 7, 2000] + Added high-level functions png_read_png(), png_write_png(), png_free_pixels(). + +Version 1.0.5n [January 9, 2000] + Added png_free_PLTE() function, and modified png_set_PLTE() to malloc its + own memory for info_ptr->palette. This makes it safe for the calling + application to free its copy of the palette any time after it calls + png_set_PLTE(). + +Version 1.0.5o [January 20, 2000] + Cosmetic changes only (removed some trailing blanks and TABs) + +Version 1.0.5p [January 31, 2000] + Renamed pngdll.mak to makefile.bd32 + Cosmetic changes in pngtest.c + +Version 1.0.5q [February 5, 2000] + Relocated the makefile.solaris warning about PATH problems. + Fixed pngvcrd.c bug by pushing/popping registers in mmxsupport (Bruce Oberg) + Revised makefile.gcmmx + Added PNG_SETJMP_SUPPORTED, PNG_SETJMP_NOT_SUPPORTED, and PNG_ABORT() macros + +Version 1.0.5r [February 7, 2000] + Removed superfluous prototype for png_get_itxt from png.h + Fixed a bug in pngrtran.c that improperly expanded the background color. + Return *num_text=0 from png_get_text() when appropriate, and fix documentation + of png_get_text() in libpng.txt/libpng.3. + +Version 1.0.5s [February 18, 2000] + Added "png_jmp_env()" macro to pngconf.h, to help people migrate to the + new error handler that's planned for the next libpng release, and changed + example.c, pngtest.c, and contrib programs to use this macro. + Revised some of the DLL-export macros in pngconf.h (Greg Roelofs) + Fixed a bug in png_read_png() that caused it to fail to expand some images + that it should have expanded. + Fixed some mistakes in the unused and undocumented INCH_CONVERSIONS functions + in pngget.c + Changed the allocation of palette, history, and trans arrays back to + the version 1.0.5 method (linking instead of copying) which restores + backward compatibility with version 1.0.5. Added some remarks about + that in example.c. Added "free_me" member to info_ptr and png_ptr + and added png_free_data() function. + Updated makefile.linux and makefile.gccmmx to make directories conditionally. + Made cosmetic changes to pngasmrd.h + Added png_set_rows() and png_get_rows(), for use with png_read|write_png(). + Modified png_read_png() to allocate info_ptr->row_pointers only if it + hasn't already been allocated. + +Version 1.0.5t [March 4, 2000] + Changed png_jmp_env() migration aiding macro to png_jmpbuf(). + Fixed "interlace" typo (should be "interlaced") in contrib/gregbook/read2-x.c + Fixed bug with use of PNG_BEFORE_IHDR bit in png_ptr->mode, introduced when + PNG_FLAG_HAVE_CHUNK_HEADER was moved into png_ptr->mode in version 1.0.5b + Files in contrib/gregbook were revised to use png_jmpbuf() and to select + a 24-bit visual if one is available, and to allow abbreviated options. + Files in contrib/pngminus were revised to use the png_jmpbuf() macro. + Removed spaces in makefile.linux and makefile.gcmmx, introduced in 1.0.5s + +Version 1.0.5u [March 5, 2000] + Simplified the code that detects old png.h in png.c and pngtest.c + Renamed png_spalette (_p, _pp) to png_sPLT_t (_tp, _tpp) + Increased precision of rgb_to_gray calculations from 8 to 15 bits and + added png_set_rgb_to_gray_fixed() function. + Added makefile.bc32 (32-bit Borland C++, C mode) + +Version 1.0.5v [March 11, 2000] + Added some parentheses to the png_jmpbuf macro definition. + Updated references to the zlib home page, which has moved to freesoftware.com. + Corrected bugs in documentation regarding png_read_row() and png_write_row(). + Updated documentation of png_rgb_to_gray calculations in libpng.3/libpng.txt. + Renamed makefile.borland,turboc3 back to makefile.bor,tc3 as in version 1.0.3, + revised borland makefiles; added makefile.ibmvac3 and makefile.gcc (Cosmin) + +Version 1.0.6 [March 20, 2000] + Minor revisions of makefile.bor, libpng.txt, and gregbook/rpng2-win.c + Added makefile.sggcc (SGI IRIX with gcc) + +Version 1.0.6d [April 7, 2000] + Changed sprintf() to strcpy() in png_write_sCAL_s() to work without STDIO + Added data_length parameter to png_decompress_chunk() function + Revised documentation to remove reference to abandoned png_free_chnk functions + Fixed an error in png_rgb_to_gray_fixed() + Revised example.c, usage of png_destroy_write_struct(). + Renamed makefile.ibmvac3 to makefile.ibmc, added libpng.icc IBM project file + Added a check for info_ptr->free_me&PNG_FREE_TEXT when freeing text in png.c + Simplify png_sig_bytes() function to remove use of non-ISO-C strdup(). + +Version 1.0.6e [April 9, 2000] + Added png_data_freer() function. + In the code that checks for over-length tRNS chunks, added check of + info_ptr->num_trans as well as png_ptr->num_trans (Matthias Benckmann) + Minor revisions of libpng.txt/libpng.3. + Check for existing data and free it if the free_me flag is set, in png_set_*() + and png_handle_*(). + Only define PNG_WEIGHTED_FILTERS_SUPPORTED when PNG_FLOATING_POINT_SUPPORTED + is defined. + Changed several instances of PNG_NO_CONSOLE_ID to PNG_NO_STDIO in pngrutil.c + and mentioned the purposes of the two macros in libpng.txt/libpng.3. + +Version 1.0.6f [April 14, 2000] + Revised png_set_iCCP() and png_set_rows() to avoid prematurely freeing data. + Add checks in png_set_text() for NULL members of the input text structure. + Revised libpng.txt/libpng.3. + Removed superfluous prototype for png_set_iTXt from png.h + Removed "else" from pngread.c, after png_error(), and changed "0" to "length". + Changed several png_errors about malformed ancillary chunks to png_warnings. + +Version 1.0.6g [April 24, 2000] + Added png_pass-* arrays to pnggccrd.c when PNG_USE_LOCAL_ARRAYS is defined. + Relocated paragraph about png_set_background() in libpng.3/libpng.txt + and other revisions (Matthias Benckmann) + Relocated info_ptr->free_me, png_ptr->free_me, and other info_ptr and + png_ptr members to restore binary compatibility with libpng-1.0.5 + (breaks compatibility with libpng-1.0.6). + +Version 1.0.6h [April 24, 2000] + Changed shared library so-number pattern from 2.x.y.z to xy.z (this builds + libpng.so.10 & libpng.so.10.6h instead of libpng.so.2 & libpng.so.2.1.0.6h) + This is a temporary change for test purposes. + +Version 1.0.6i [May 2, 2000] + Rearranged some members at the end of png_info and png_struct, to put + unknown_chunks_num and free_me within the original size of the png_structs + and free_me, png_read_user_fn, and png_free_fn within the original png_info, + because some old applications allocate the structs directly instead of + using png_create_*(). + Added documentation of user memory functions in libpng.txt/libpng.3 + Modified png_read_png so that it will use user_allocated row_pointers + if present, unless free_me directs that it be freed, and added description + of the use of png_set_rows() and png_get_rows() in libpng.txt/libpng.3. + Added PNG_LEGACY_SUPPORTED macro, and #ifdef out all new (since version + 1.00) members of png_struct and png_info, to regain binary compatibility + when you define this macro. Capabilities lost in this event + are user transforms (new in version 1.0.0),the user transform pointer + (new in version 1.0.2), rgb_to_gray (new in 1.0.5), iCCP, sCAL, sPLT, + the high-level interface, and unknown chunks support (all new in 1.0.6). + This was necessary because of old applications that allocate the structs + directly as authors were instructed to do in libpng-0.88 and earlier, + instead of using png_create_*(). + Added modes PNG_CREATED_READ_STRUCT and PNG_CREATED_WRITE_STRUCT which + can be used to detect codes that directly allocate the structs, and + code to check these modes in png_read_init() and png_write_init() and + generate a libpng error if the modes aren't set and PNG_LEGACY_SUPPORTED + was not defined. + Added makefile.intel and updated makefile.watcom (Pawel Mrochen) + +Version 1.0.6j [May 3, 2000] + Overloaded png_read_init() and png_write_init() with macros that convert + calls to png_read_init_2() or png_write_init_2() that check the version + and structure sizes. + +Version 1.0.7beta11 [May 7, 2000] + Removed the new PNG_CREATED_READ_STRUCT and PNG_CREATED_WRITE_STRUCT modes + which are no longer used. + Eliminated the three new members of png_text when PNG_LEGACY_SUPPORTED is + defined or when neither PNG_READ_iTXt_SUPPORTED nor PNG_WRITE_iTXT_SUPPORTED + is defined. + Made PNG_NO_READ|WRITE_iTXt the default setting, to avoid memory + overrun when old applications fill the info_ptr->text structure directly. + Added PNGAPI macro, and added it to the definitions of all exported functions. + Relocated version macro definitions ahead of the includes of zlib.h and + pngconf.h in png.h. + +Version 1.0.7beta12 [May 12, 2000] + Revised pngset.c to avoid a problem with expanding the png_debug macro. + Deleted some extraneous defines from pngconf.h + Made PNG_NO_CONSOLE_IO the default condition when PNG_BUILD_DLL is defined. + Use MSC _RPTn debugging instead of fprintf if _MSC_VER is defined. + Added png_access_version_number() function. + Check for mask&PNG_FREE_CHNK (for TEXT, SCAL, PCAL) in png_free_data(). + Expanded libpng.3/libpng.txt information about png_data_freer(). + +Version 1.0.7beta14 [May 17, 2000] (beta13 was not published) + Changed pnggccrd.c and pngvcrd.c to handle bad adaptive filter types as + warnings instead of errors, as pngrutil.c does. + Set the PNG_INFO_IDAT valid flag in png_set_rows() so png_write_png() + will actually write IDATs. + Made the default PNG_USE_LOCAL_ARRAYS depend on PNG_DLL instead of WIN32. + Make png_free_data() ignore its final parameter except when freeing data + that can have multiple instances (text, sPLT, unknowns). + Fixed a new bug in png_set_rows(). + Removed info_ptr->valid tests from png_free_data(), as in version 1.0.5. + Added png_set_invalid() function. + Fixed incorrect illustrations of png_destroy_write_struct() in example.c. + +Version 1.0.7beta15 [May 30, 2000] + Revised the deliberately erroneous Linux setjmp code in pngconf.h to produce + fewer error messages. + Rearranged checks for Z_OK to check the most likely path first in pngpread.c + and pngwutil.c. + Added checks in pngtest.c for png_create_*() returning NULL, and mentioned + in libpng.txt/libpng.3 the need for applications to check this. + Changed names of png_default_*() functions in pngtest to pngtest_*(). + Changed return type of png_get_x|y_offset_*() from png_uint_32 to png_int_32. + Fixed some bugs in the unused PNG_INCH_CONVERSIONS functions in pngget.c + Set each pointer to NULL after freeing it in png_free_data(). + Worked around a problem in pngconf.h; AIX's strings.h defines an "index" + macro that conflicts with libpng's png_color_16.index. (Dimitri + Papadapoulos) + Added "msvc" directory with MSVC++ project files (Simon-Pierre Cadieux). + +Version 1.0.7beta16 [June 4, 2000] + Revised the workaround of AIX string.h "index" bug. + Added a check for overlength PLTE chunk in pngrutil.c. + Added PNG_NO_POINTER_INDEXING macro to use array-indexing instead of pointer + indexing in pngrutil.c and pngwutil.c to accommodate a buggy compiler. + Added a warning in png_decompress_chunk() when it runs out of data, e.g. + when it tries to read an erroneous PhotoShop iCCP chunk. + Added PNG_USE_DLL macro. + Revised the copyright/disclaimer/license notice. + Added contrib/msvctest directory + +Version 1.0.7rc1 [June 9, 2000] + Corrected the definition of PNG_TRANSFORM_INVERT_ALPHA (0x0400 not 0x0200) + Added contrib/visupng directory (Willem van Schaik) + +Version 1.0.7beta18 [June 23, 2000] + Revised PNGAPI definition, and pngvcrd.c to work with __GCC__ + and do not redefine PNGAPI if it is passed in via a compiler directive. + Revised visupng/PngFile.c to remove returns from within the Try block. + Removed leading underscores from "_PNG_H" and "_PNG_SAVE_BSD_SOURCE" macros. + Updated contrib/visupng/cexcept.h to version 1.0.0. + Fixed bugs in pngwrite.c and pngwutil.c that prevented writing iCCP chunks. + +Version 1.0.7rc2 [June 28, 2000] + Updated license to include disclaimers required by UCITA. + Fixed "DJBPP" typo in pnggccrd.c introduced in beta18. + +Version 1.0.7 [July 1, 2000] + Revised the definition of "trans_values" in libpng.3/libpng.txt + +Version 1.0.8beta1 [July 8, 2000] + Added png_free(png_ptr, key) two places in pngpread.c to stop memory leaks. + Changed PNG_NO_STDIO to PNG_NO_CONSOLE_IO, several places in pngrutil.c and + pngwutil.c. + Changed PNG_EXPORT_VAR to use PNG_IMPEXP, in pngconf.h. + Removed unused "#include " from png.c + Added WindowsCE support. + Revised pnggccrd.c to work with gcc-2.95.2 and in the Cygwin environment. + +Version 1.0.8beta2 [July 10, 2000] + Added project files to the wince directory and made further revisions + of pngtest.c, pngrio.c, and pngwio.c in support of WindowsCE. + +Version 1.0.8beta3 [July 11, 2000] + Only set the PNG_FLAG_FREE_TRNS or PNG_FREE_TRNS flag in png_handle_tRNS() + for indexed-color input files to avoid potential double-freeing trans array + under some unusual conditions; problem was introduced in version 1.0.6f. + Further revisions to pngtest.c and files in the wince subdirectory. + +Version 1.0.8beta4 [July 14, 2000] + Added the files pngbar.png and pngbar.jpg to the distribution. + Added makefile.cygwin, and cygwin support in pngconf.h + Added PNG_NO_ZALLOC_ZERO macro (makes png_zalloc skip zeroing memory) + +Version 1.0.8rc1 [July 16, 2000] + Revised png_debug() macros and statements to eliminate compiler warnings. + +Version 1.0.8 [July 24, 2000] + Added png_flush() in pngwrite.c, after png_write_IEND(). + Updated makefile.hpux to build a shared library. + +Version 1.0.9beta1 [November 10, 2000] + Fixed typo in scripts/makefile.hpux + Updated makevms.com in scripts and contrib/* and contrib/* (Martin Zinser) + Fixed seqence-point bug in contrib/pngminus/png2pnm (Martin Zinser) + Changed "cdrom.com" in documentation to "libpng.org" + Revised pnggccrd.c to get it all working, and updated makefile.gcmmx (Greg). + Changed type of "params" from voidp to png_voidp in png_read|write_png(). + Make sure PNGAPI and PNG_IMPEXP are defined in pngconf.h. + Revised the 3 instances of WRITEFILE in pngtest.c. + Relocated "msvc" and "wince" project subdirectories into "dll" subdirectory. + Updated png.rc in dll/msvc project + Revised makefile.dec to define and use LIBPATH and INCPATH + Increased size of global png_libpng_ver[] array from 12 to 18 chars. + Made global png_libpng_ver[], png_sig[] and png_pass_*[] arrays const. + Removed duplicate png_crc_finish() from png_handle_bKGD() function. + Added a warning when application calls png_read_update_info() multiple times. + Revised makefile.cygwin + Fixed bugs in iCCP support in pngrutil.c and pngwutil.c. + Replaced png_set_empty_plte_permitted() with png_permit_mng_features(). + +Version 1.0.9beta2 [November 19, 2000] + Renamed the "dll" subdirectory "projects". + Added borland project files to "projects" subdirectory. + Set VS_FF_PRERELEASE and VS_FF_PATCHED flags in msvc/png.rc when appropriate. + Add error message in png_set_compression_buffer_size() when malloc fails. + +Version 1.0.9beta3 [November 23, 2000] + Revised PNG_LIBPNG_BUILD_TYPE macro in png.h, used in the msvc project. + Removed the png_flush() in pngwrite.c that crashes some applications + that don't set png_output_flush_fn. + Added makefile.macosx and makefile.aix to scripts directory. + +Version 1.0.9beta4 [December 1, 2000] + Change png_chunk_warning to png_warning in png_check_keyword(). + Increased the first part of msg buffer from 16 to 18 in png_chunk_error(). + +Version 1.0.9beta5 [December 15, 2000] + Added support for filter method 64 (for PNG datastreams embedded in MNG). + +Version 1.0.9beta6 [December 18, 2000] + Revised png_set_filter() to accept filter method 64 when appropriate. + Added new PNG_HAVE_PNG_SIGNATURE bit to png_ptr->mode and use it to + help prevent applications from using MNG features in PNG datastreams. + Added png_permit_mng_features() function. + Revised libpng.3/libpng.txt. Changed "filter type" to "filter method". + +Version 1.0.9rc1 [December 23, 2000] + Revised test for PNG_HAVE_PNG_SIGNATURE in pngrutil.c + Fixed error handling of unknown compression type in png_decompress_chunk(). + In pngconf.h, define __cdecl when _MSC_VER is defined. + +Version 1.0.9beta7 [December 28, 2000] + Changed PNG_TEXT_COMPRESSION_zTXt to PNG_COMPRESSION_TYPE_BASE several places. + Revised memory management in png_set_hIST and png_handle_hIST in a backward + compatible manner. PLTE and tRNS were revised similarly. + Revised the iCCP chunk reader to ignore trailing garbage. + +Version 1.0.9beta8 [January 12, 2001] + Moved pngasmrd.h into pngconf.h. + Improved handling of out-of-spec garbage iCCP chunks generated by PhotoShop. + +Version 1.0.9beta9 [January 15, 2001] + Added png_set_invalid, png_permit_mng_features, and png_mmx_supported to + wince and msvc project module definition files. + Minor revision of makefile.cygwin. + Fixed bug with progressive reading of narrow interlaced images in pngpread.c + +Version 1.0.9beta10 [January 16, 2001] + Do not typedef png_FILE_p in pngconf.h when PNG_NO_STDIO is defined. + Fixed "png_mmx_supported" typo in project definition files. + +Version 1.0.9beta11 [January 19, 2001] + Updated makefile.sgi to make shared library. + Removed png_mmx_support() function and disabled PNG_MNG_FEATURES_SUPPORTED + by default, for the benefit of DLL forward compatibility. These will + be re-enabled in version 1.2.0. + +Version 1.0.9rc2 [January 22, 2001] + Revised cygwin support. + +Version 1.0.9 [January 31, 2001] + Added check of cygwin's ALL_STATIC in pngconf.h + Added "-nommx" parameter to contrib/gregbook/rpng2-win and rpng2-x demos. + +Version 1.0.10beta1 [March 14, 2001] + Revised makefile.dec, makefile.sgi, and makefile.sggcc; added makefile.hpgcc. + Reformatted libpng.3 to eliminate bad line breaks. + Added checks for _mmx_supported in the read_filter_row function of pnggccrd.c + Added prototype for png_mmx_support() near the top of pnggccrd.c + Moved some error checking from png_handle_IHDR to png_set_IHDR. + Added PNG_NO_READ_SUPPORTED and PNG_NO_WRITE_SUPPORTED macros. + Revised png_mmx_support() function in pnggccrd.c + Restored version 1.0.8 PNG_WRITE_EMPTY_PLTE_SUPPORTED behavior in pngwutil.c + Fixed memory leak in contrib/visupng/PngFile.c + Fixed bugs in png_combine_row() in pnggccrd.c and pngvcrd.c (C version) + Added warnings when retrieving or setting gamma=0. + Increased the first part of msg buffer from 16 to 18 in png_chunk_warning(). + +Version 1.0.10rc1 [March 23, 2001] + Changed all instances of memcpy, strcpy, and strlen to png_memcpy, png_strcpy, + and png_strlen. + Revised png_mmx_supported() function in pnggccrd.c to return proper value. + Fixed bug in progressive reading (pngpread.c) with small images (height < 8). + +Version 1.0.10 [March 30, 2001] + Deleted extraneous space (introduced in 1.0.9) from line 42 of makefile.cygwin + Added beos project files (Chris Herborth) + +Version 1.0.11beta1 [April 3, 2001] + Added type casts on several png_malloc() calls (Dimitri Papadapoulos). + Removed a no-longer needed AIX work-around from pngconf.h + Changed several "//" single-line comments to C-style in pnggccrd.c + +Version 1.0.11beta2 [April 11, 2001] + Removed PNGAPI from several functions whose prototypes did not have PNGAPI. + Updated scripts/pngos2.def + +Version 1.0.11beta3 [April 14, 2001] + Added checking the results of many instances of png_malloc() for NULL + +Version 1.0.11beta4 [April 20, 2001] + Undid the changes from version 1.0.11beta3. Added a check for NULL return + from user's malloc_fn(). + Removed some useless type casts of the NULL pointer. + Added makefile.netbsd + +Version 1.0.11 [April 27, 2001] + Revised makefile.netbsd + +Version 1.0.12beta1 [May 14, 2001] + Test for Windows platform in pngconf.h when including malloc.h (Emmanuel Blot) + Updated makefile.cygwin and handling of Cygwin's ALL_STATIC in pngconf.h + Added some never-to-be-executed code in pnggccrd.c to quiet compiler warnings. + Eliminated the png_error about apps using png_read|write_init(). Instead, + libpng will reallocate the png_struct and info_struct if they are too small. + This retains future binary compatibility for old applications written for + libpng-0.88 and earlier. + +Version 1.2.0beta1 [May 6, 2001] + Bumped DLLNUM to 2. + Re-enabled PNG_MNG_FEATURES_SUPPORTED and enabled PNG_ASSEMBLER_CODE_SUPPORTED + by default. + Added runtime selection of MMX features. + Added png_set_strip_error_numbers function and related macros. + +Version 1.2.0beta2 [May 7, 2001] + Finished merging 1.2.0beta1 with version 1.0.11 + Added a check for attempts to read or write PLTE in grayscale PNG datastreams. + +Version 1.2.0beta3 [May 17, 2001] + Enabled user memory function by default. + Modified png_create_struct so it passes user mem_ptr to user memory allocator. + Increased png_mng_features flag from png_byte to png_uint_32. + Bumped shared-library (so-number) and dll-number to 3. + +Version 1.2.0beta4 [June 23, 2001] + Check for missing profile length field in iCCP chunk and free chunk_data + in case of truncated iCCP chunk. + Bumped shared-library number to 3 in makefile.sgi and makefile.sggcc + Bumped dll-number from 2 to 3 in makefile.cygwin + Revised contrib/gregbook/rpng*-x.c to avoid a memory leak and to exit cleanly + if user attempts to run it on an 8-bit display. + Updated contrib/gregbook + Use png_malloc instead of png_zalloc to allocate palette in pngset.c + Updated makefile.ibmc + Added some typecasts to eliminate gcc 3.0 warnings. Changed prototypes + of png_write_oFFS width and height from png_uint_32 to png_int_32. + Updated example.c + Revised prototypes for png_debug_malloc and png_debug_free in pngtest.c + +Version 1.2.0beta5 [August 8, 2001] + Revised contrib/gregbook + Revised makefile.gcmmx + Revised pnggccrd.c to conditionally compile some thread-unsafe code only + when PNG_THREAD_UNSAFE_OK is defined. + Added tests to prevent pngwutil.c from writing a bKGD or tRNS chunk with + value exceeding 2^bit_depth-1 + Revised makefile.sgi and makefile.sggcc + Replaced calls to fprintf(stderr,...) with png_warning() in pnggccrd.c + Removed restriction that do_invert_mono only operate on 1-bit opaque files + +Version 1.2.0 [September 1, 2001] + Changed a png_warning() to png_debug() in pnggccrd.c + Fixed contrib/gregbook/rpng-x.c, rpng2-x.c to avoid crash with XFreeGC(). + +Version 1.2.1beta1 [October 19, 2001] + Revised makefile.std in contrib/pngminus + Include background_1 in png_struct regardless of gamma support. + Revised makefile.netbsd and makefile.macosx, added makefile.darwin. + Revised example.c to provide more details about using row_callback(). + +Version 1.2.1beta2 [October 25, 2001] + Added type cast to each NULL appearing in a function call, except for + WINCE functions. + Added makefile.so9. + +Version 1.2.1beta3 [October 27, 2001] + Removed type casts from all NULLs. + Simplified png_create_struct_2(). + +Version 1.2.1beta4 [November 7, 2001] + Revised png_create_info_struct() and png_creat_struct_2(). + Added error message if png_write_info() was omitted. + Type cast NULLs appearing in function calls when _NO_PROTO or + PNG_TYPECAST_NULL is defined. + +Version 1.2.1rc1 [November 24, 2001] + Type cast NULLs appearing in function calls except when PNG_NO_TYPECAST_NULL + is defined. + Changed typecast of "size" argument to png_size_t in pngmem.c calls to + the user malloc_fn, to agree with the prototype in png.h + Added a pop/push operation to pnggccrd.c, to preserve Eflag (Maxim Sobolev) + Updated makefile.sgi to recognize LIBPATH and INCPATH. + Updated various makefiles so "make clean" does not remove previous major + version of the shared library. + +Version 1.2.1rc2 [December 4, 2001] + Always allocate 256-entry internal palette, hist, and trans arrays, to + avoid out-of-bounds memory reference caused by invalid PNG datastreams. + Added a check for prefix_length > data_length in iCCP chunk handler. + +Version 1.2.1 [December 7, 2001] + None. + +Version 1.2.2beta1 [February 22, 2002] + Fixed a bug with reading the length of iCCP profiles (Larry Reeves). + Revised makefile.linux, makefile.gcmmx, and makefile.sgi to generate + libpng.a, libpng12.so (not libpng.so.3), and libpng12/png.h + Revised makefile.darwin to remove "-undefined suppress" option. + Added checks for gamma and chromaticity values over 21474.83, which exceed + the limit for PNG unsigned 32-bit integers when encoded. + Revised calls to png_create_read_struct() and png_create_write_struct() + for simpler debugging. + Revised png_zalloc() so zlib handles errors (uses PNG_FLAG_MALLOC_NULL_MEM_OK) + +Version 1.2.2beta2 [February 23, 2002] + Check chunk_length and idat_size for invalid (over PNG_MAX_UINT) lengths. + Check for invalid image dimensions in png_get_IHDR. + Added missing "fi;" in the install target of the SGI makefiles. + Added install-static to all makefiles that make shared libraries. + Always do gamma compensation when image is partially transparent. + +Version 1.2.2beta3 [March 7, 2002] + Compute background.gray and background_1.gray even when color_type is RGB + in case image gets reduced to gray later. + Modified shared-library makefiles to install pkgconfig/libpngNN.pc. + Export (with PNGAPI) png_zalloc, png_zfree, and png_handle_as_unknown + Removed unused png_write_destroy_info prototype from png.h + Eliminated incorrect use of width_mmx from pnggccrd.c in pixel_bytes == 8 case + Added install-shared target to all makefiles that make shared libraries. + Stopped a double free of palette, hist, and trans when not using free_me. + Added makefile.32sunu for Sun Ultra 32 and makefile.64sunu for Sun Ultra 64. + +Version 1.2.2beta4 [March 8, 2002] + Compute background.gray and background_1.gray even when color_type is RGB + in case image gets reduced to gray later (Jason Summers). + Relocated a misplaced /bin/rm in the "install-shared" makefile targets + Added PNG_1_0_X macro which can be used to build a 1.0.x-compatible library. + +Version 1.2.2beta5 [March 26, 2002] + Added missing PNGAPI to several function definitions. + Check for invalid bit_depth or color_type in png_get_IHDR(), and + check for missing PLTE or IHDR in png_push_read_chunk() (Matthias Clasen). + Revised iTXt support to accept NULL for lang and lang_key. + Compute gamma for color components of background even when color_type is gray. + Changed "()" to "{}" in scripts/libpng.pc.in. + Revised makefiles to put png.h and pngconf.h only in $prefix/include/libpngNN + Revised makefiles to make symlink to libpng.so.NN in addition to libpngNN.so + +Version 1.2.2beta6 [March 31, 2002] + +Version 1.0.13beta1 [March 31, 2002] + Prevent png_zalloc() from trying to memset memory that it failed to acquire. + Add typecasts of PNG_MAX_UINT in pngset_cHRM_fixed() (Matt Holgate). + Ensure that the right function (user or default) is used to free the + png_struct after an error in png_create_read_struct_2(). + +Version 1.2.2rc1 [April 7, 2002] + +Version 1.0.13rc1 [April 7, 2002] + Save the ebx register in pnggccrd.c (Sami Farin) + Add "mem_ptr = png_ptr->mem_ptr" in png_destroy_write_struct() (Paul Gardner). + Updated makefiles to put headers in include/libpng and remove old include/*.h. + +Version 1.2.2 [April 15, 2002] + +Version 1.0.13 [April 15, 2002] + Revised description of png_set_filter() in libpng.3/libpng.txt. + Revised makefile.netbsd and added makefile.neNNbsd and makefile.freebsd + +Version 1.0.13patch01 [April 17, 2002] + +Version 1.2.2patch01 [April 17, 2002] + Changed ${PNGMAJ}.${PNGVER} bug to ${PNGVER} in makefile.sgi and + makefile.sggcc + Fixed VER -> PNGVER typo in makefile.macosx and added install-static to + install + Added install: target to makefile.32sunu and makefile.64sunu + +Version 1.0.13patch03 [April 18, 2002] + +Version 1.2.2patch03 [April 18, 2002] + Revised 15 makefiles to link libpng.a to libpngNN.a and the include libpng + subdirectory to libpngNN subdirectory without the full pathname. + Moved generation of libpng.pc from "install" to "all" in 15 makefiles. + +Version 1.2.3rc1 [April 28, 2002] + Added install-man target to 15 makefiles (Dimitri Papadopolous-Orfanos). + Added $(DESTDIR) feature to 24 makefiles (Tim Mooney) + Fixed bug with $prefix, should be $(prefix) in makefile.hpux. + Updated cygwin-specific portion of pngconf.h and revised makefile.cygwin + Added a link from libpngNN.pc to libpng.pc in 15 makefiles. + Added links from include/libpngNN/*.h to include/*.h in 24 makefiles. + Revised makefile.darwin to make relative links without full pathname. + Added setjmp() at the end of png_create_*_struct_2() in case user forgets + to put one in their application. + Restored png_zalloc() and png_zfree() prototypes to version 1.2.1 and + removed them from module definition files. + +Version 1.2.3rc2 [May 1, 2002] + Fixed bug in reporting number of channels in pngget.c and pngset.c, + that was introduced in version 1.2.2beta5. + Exported png_zalloc(), png_zfree(), png_default_read(), png_default_write(), + png_default_flush(), and png_push_fill_buffer() and included them in + module definition files. + Added "libpng.pc" dependency to the "install-shared" target in 15 makefiles. + +Version 1.2.3rc3 [May 1, 2002] + Revised prototype for png_default_flush() + Remove old libpng.pc and libpngNN.pc before installing new ones. + +Version 1.2.3rc4 [May 2, 2002] + Typos in *.def files (png_default_read|write -> png_default_read|write_data) + In makefiles, changed rm libpng.NN.pc to rm libpngNN.pc + Added libpng-config and libpngNN-config and modified makefiles to install + them. + Changed $(MANPATH) to $(DESTDIR)$(MANPATH) in makefiles + Added "Win32 DLL VB" configuration to projects/msvc/libpng.dsp + +Version 1.2.3rc5 [May 11, 2002] + Changed "error" and "message" in prototypes to "error_message" and + "warning_message" to avoid namespace conflict. + Revised 15 makefiles to build libpng-config from libpng-config-*.in + Once more restored png_zalloc and png_zfree to regular nonexported form. + Restored png_default_read|write_data, png_default_flush, png_read_fill_buffer + to nonexported form, but with PNGAPI, and removed them from module def + files. + +Version 1.2.3rc6 [May 14, 2002] + Removed "PNGAPI" from png_zalloc() and png_zfree() in png.c + Changed "Gz" to "Gd" in projects/msvc/libpng.dsp and zlib.dsp. + Removed leftover libpng-config "sed" script from four makefiles. + Revised libpng-config creating script in 16 makefiles. + +Version 1.2.3 [May 22, 2002] + Revised libpng-config target in makefile.cygwin. + Removed description of png_set_mem_fn() from documentation. + Revised makefile.freebsd. + Minor cosmetic changes to 15 makefiles, e.g., $(DI) = $(DESTDIR)/$(INCDIR). + Revised projects/msvc/README.txt + Changed -lpng to -lpngNN in LDFLAGS in several makefiles. + +Version 1.2.4beta1 [May 24, 2002] + Added libpng.pc and libpng-config to "all:" target in 16 makefiles. + Fixed bug in 16 makefiles: $(DESTDIR)/$(LIBPATH) to $(DESTDIR)$(LIBPATH) + Added missing "\" before closing double quote in makefile.gcmmx. + Plugged various memory leaks; added png_malloc_warn() and png_set_text_2() + functions. + +Version 1.2.4beta2 [June 25, 2002] + Plugged memory leak of png_ptr->current_text (Matt Holgate). + Check for buffer overflow before reading CRC in pngpread.c (Warwick Allison) + Added -soname to the loader flags in makefile.dec, makefile.sgi, and + makefile.sggcc. + Added "test-installed" target to makefile.linux, makefile.gcmmx, + makefile.sgi, and makefile.sggcc. + +Version 1.2.4beta3 [June 28, 2002] + Plugged memory leak of row_buf in pngtest.c when there is a png_error(). + Detect buffer overflow in pngpread.c when IDAT is corrupted with extra data. + Added "test-installed" target to makefile.32sunu, makefile.64sunu, + makefile.beos, makefile.darwin, makefile.dec, makefile.macosx, + makefile.solaris, makefile.hpux, makefile.hpgcc, and makefile.so9. + +Version 1.2.4rc1 and 1.0.14rc1 [July 2, 2002] + Added "test-installed" target to makefile.cygwin and makefile.sco. + Revised pnggccrd.c to be able to back out version 1.0.x via PNG_1_0_X macro. + +Version 1.2.4 and 1.0.14 [July 8, 2002] + Changed png_warning() to png_error() when width is too large to process. + +Version 1.2.4patch01 [July 20, 2002] + Revised makefile.cygwin to use DLL number 12 instead of 13. + +Version 1.2.5beta1 [August 6, 2002] + Added code to contrib/gregbook/readpng2.c to ignore unused chunks. + Replaced toucan.png in contrib/gregbook (it has been corrupt since 1.0.11) + Removed some stray *.o files from contrib/gregbook. + Changed png_error() to png_warning() about "Too much data" in pngpread.c + and about "Extra compressed data" in pngrutil.c. + Prevent png_ptr->pass from exceeding 7 in png_push_finish_row(). + Updated makefile.hpgcc + Updated png.c and pnggccrd.c handling of return from png_mmx_support() + +Version 1.2.5beta2 [August 15, 2002] + Only issue png_warning() about "Too much data" in pngpread.c when avail_in + is nonzero. + Updated makefiles to install a separate libpng.so.3 with its own rpath. + +Version 1.2.5rc1 and 1.0.15rc1 [August 24, 2002] + Revised makefiles to not remove previous minor versions of shared libraries. + +Version 1.2.5rc2 and 1.0.15rc2 [September 16, 2002] + Revised 13 makefiles to remove "-lz" and "-L$(ZLIBLIB)", etc., from shared + library loader directive. + Added missing "$OBJSDLL" line to makefile.gcmmx. + Added missing "; fi" to makefile.32sunu. + +Version 1.2.5rc3 and 1.0.15rc3 [September 18, 2002] + Revised libpng-config script. + +Version 1.2.5 and 1.0.15 [October 3, 2002] + Revised makefile.macosx, makefile.darwin, makefile.hpgcc, and makefile.hpux, + and makefile.aix. + Relocated two misplaced PNGAPI lines in pngtest.c + +Version 1.2.6beta1 [October 22, 2002] + Commented out warning about uninitialized mmx_support in pnggccrd.c. + Changed "IBMCPP__" flag to "__IBMCPP__" in pngconf.h. + Relocated two more misplaced PNGAPI lines in pngtest.c + Fixed memory overrun bug in png_do_read_filler() with 16-bit datastreams, + introduced in version 1.0.2. + Revised makefile.macosx, makefile.dec, makefile.aix, and makefile.32sunu. + +Version 1.2.6beta2 [November 1, 2002] + Added libpng-config "--ldopts" output. + Added "AR=ar" and "ARFLAGS=rc" and changed "ar rc" to "$(AR) $(ARFLAGS)" + in makefiles. + +Version 1.2.6beta3 [July 18, 2004] + Reverted makefile changes from version 1.2.6beta2 and some of the changes + from version 1.2.6beta1; these will be postponed until version 1.2.7. + Version 1.2.6 is going to be a simple bugfix release. + Changed the one instance of "ln -sf" to "ln -f -s" in each Sun makefile. + Fixed potential overrun in pngerror.c by using strncpy instead of memcpy. + Added "#!/bin/sh" at the top of configure, for recognition of the + 'x' flag under Cygwin (Cosmin). + Optimized vacuous tests that silence compiler warnings, in png.c (Cosmin). + Added support for PNG_USER_CONFIG, in pngconf.h (Cosmin). + Fixed the special memory handler for Borland C under DOS, in pngmem.c + (Cosmin). + Removed some spurious assignments in pngrutil.c (Cosmin). + Replaced 65536 with 65536L, and 0xffff with 0xffffL, to silence warnings + on 16-bit platforms (Cosmin). + Enclosed shift op expressions in parentheses, to silence warnings (Cosmin). + Used proper type png_fixed_point, to avoid problems on 16-bit platforms, + in png_handle_sRGB() (Cosmin). + Added compression_type to png_struct, and optimized the window size + inside the deflate stream (Cosmin). + Fixed definition of isnonalpha(), in pngerror.c and pngrutil.c (Cosmin). + Fixed handling of unknown chunks that come after IDAT (Cosmin). + Allowed png_error() and png_warning() to work even if png_ptr == NULL + (Cosmin). + Replaced row_info->rowbytes with row_bytes in png_write_find_filter() + (Cosmin). + Fixed definition of PNG_LIBPNG_VER_DLLNUM (Simon-Pierre). + Used PNG_LIBPNG_VER and PNG_LIBPNG_VER_STRING instead of the hardcoded + values in png.c (Simon-Pierre, Cosmin). + Initialized png_libpng_ver[] with PNG_LIBPNG_VER_STRING (Simon-Pierre). + Replaced PNG_LIBPNG_VER_MAJOR with PNG_LIBPNG_VER_DLLNUM in png.rc + (Simon-Pierre). + Moved the definition of PNG_HEADER_VERSION_STRING near the definitions + of the other PNG_LIBPNG_VER_... symbols in png.h (Cosmin). + Relocated #ifndef PNGAPI guards in pngconf.h (Simon-Pierre, Cosmin). + Updated scripts/makefile.vc(a)win32 (Cosmin). + Updated the MSVC project (Simon-Pierre, Cosmin). + Updated the Borland C++ Builder project (Cosmin). + Avoided access to asm_flags in pngvcrd.c, if PNG_1_0_X is defined (Cosmin). + Commented out warning about uninitialized mmx_support in pngvcrd.c (Cosmin). + Removed scripts/makefile.bd32 and scripts/pngdef.pas (Cosmin). + Added extra guard around inclusion of Turbo C memory headers, in pngconf.h + (Cosmin). + Renamed projects/msvc/ to projects/visualc6/, and projects/borland/ to + projects/cbuilder5/ (Cosmin). + Moved projects/visualc6/png32ms.def to scripts/pngw32.def, + and projects/visualc6/png.rc to scripts/pngw32.rc (Cosmin). + Added projects/visualc6/pngtest.dsp; removed contrib/msvctest/ (Cosmin). + Changed line endings to DOS style in cbuilder5 and visualc6 files, even + in the tar.* distributions (Cosmin). + Updated contrib/visupng/VisualPng.dsp (Cosmin). + Updated contrib/visupng/cexcept.h to version 2.0.0 (Cosmin). + Added a separate distribution with "configure" and supporting files (Junichi). + +Version 1.2.6beta4 [July 28, 2004] + Added user ability to change png_size_t via a PNG_SIZE_T macro. + Added png_sizeof() and png_convert_size() functions. + Added PNG_SIZE_MAX (maximum value of a png_size_t variable. + Added check in png_malloc_default() for (size_t)size != (png_uint_32)size + which would indicate an overflow. + Changed sPLT failure action from png_error to png_warning and abandon chunk. + Changed sCAL and iCCP failures from png_error to png_warning and abandon. + Added png_get_uint_31(png_ptr, buf) function. + Added PNG_UINT_32_MAX macro. + Renamed PNG_MAX_UINT to PNG_UINT_31_MAX. + Made png_zalloc() issue a png_warning and return NULL on potential + overflow. + Turn on PNG_NO_ZALLOC_ZERO by default in version 1.2.x + Revised "clobber list" in pnggccrd.c so it will compile under gcc-3.4. + Revised Borland portion of png_malloc() to return NULL or issue + png_error() according to setting of PNG_FLAG_MALLOC_NULL_MEM_OK. + Added PNG_NO_SEQUENTIAL_READ_SUPPORTED macro to conditionally remove + sequential read support. + Added some "#if PNG_WRITE_SUPPORTED" blocks. + Added #ifdef to remove some redundancy in png_malloc_default(). + Use png_malloc instead of png_zalloc to allocate the pallete. + +Version 1.0.16rc1 and 1.2.6rc1 [August 4, 2004] + Fixed buffer overflow vulnerability (CVE-2004-0597) in png_handle_tRNS(). + Fixed NULL dereference vulnerability (CVE-2004-0598) in png_handle_iCCP(). + Fixed integer overflow vulnerability (CVE-2004-0599) in png_read_png(). + Fixed some harmless bugs in png_handle_sBIT, etc, that would cause + duplicate chunk types to go undetected. + Fixed some timestamps in the -config version + Rearranged order of processing of color types in png_handle_tRNS(). + Added ROWBYTES macro to calculate rowbytes without integer overflow. + Updated makefile.darwin and removed makefile.macosx from scripts directory. + Imposed default one million column, one-million row limits on the image + dimensions, and added png_set_user_limits() function to override them. + Revised use of PNG_SET_USER_LIMITS_SUPPORTED macro. + Fixed wrong cast of returns from png_get_user_width|height_max(). + Changed some "keep the compiler happy" from empty statements to returns, + Revised libpng.txt to remove 1.2.x stuff from the 1.0.x distribution + +Version 1.0.16rc2 and 1.2.6rc2 [August 7, 2004] + Revised makefile.darwin and makefile.solaris. Removed makefile.macosx. + Revised pngtest's png_debug_malloc() to use png_malloc() instead of + png_malloc_default() which is not supposed to be exported. + Fixed off-by-one error in one of the conversions to PNG_ROWBYTES() in + pngpread.c. Bug was introduced in 1.2.6rc1. + Fixed bug in RGB to RGBX transformation introduced in 1.2.6rc1. + Fixed old bug in RGB to Gray transformation. + Fixed problem with 64-bit compilers by casting arguments to abs() + to png_int_32. + Changed "ln -sf" to "ln -f -s" in three makefiles (solaris, sco, so9). + Changed "HANDLE_CHUNK_*" to "PNG_HANDLE_CHUNK_*" (Cosmin) + Added "-@/bin/rm -f $(DL)/$(LIBNAME).so.$(PNGMAJ)" to 15 *NIX makefiles. + Added code to update the row_info->colortype in png_do_read_filler() (MSB). + +Version 1.0.16rc3 and 1.2.6rc3 [August 9, 2004] + Eliminated use of "abs()" in testing cHRM and gAMA values, to avoid + trouble with some 64-bit compilers. Created PNG_OUT_OF_RANGE() macro. + Revised documentation of png_set_keep_unknown_chunks(). + Check handle_as_unknown status in pngpread.c, as in pngread.c previously. + Moved "PNG_HANDLE_CHUNK_*" macros out of PNG_INTERNAL section of png.h + Added "rim" definitions for CONST4 and CONST6 in pnggccrd.c + +Version 1.0.16rc4 and 1.2.6rc4 [August 10, 2004] + Fixed mistake in pngtest.c introduced in 1.2.6rc2 (declaration of + "pinfo" was out of place). + +Version 1.0.16rc5 and 1.2.6rc5 [August 10, 2004] + Moved "PNG_HANDLE_CHUNK_*" macros out of PNG_ASSEMBLER_CODE_SUPPORTED + section of png.h where they were inadvertently placed in version rc3. + +Version 1.2.6 and 1.0.16 [August 15, 2004] + Revised pngtest so memory allocation testing is only done when PNG_DEBUG==1. + +Version 1.2.7beta1 [August 26, 2004] + Removed unused pngasmrd.h file. + Removed references to uu.net for archived files. Added references to + PNG Spec (second edition) and the PNG ISO/IEC Standard. + Added "test-dd" target in 15 makefiles, to run pngtest in DESTDIR. + Fixed bug with "optimized window size" in the IDAT datastream, that + causes libpng to write PNG files with incorrect zlib header bytes. + +Version 1.2.7beta2 [August 28, 2004] + Fixed bug with sCAL chunk and big-endian machines (David Munro). + Undid new code added in 1.2.6rc2 to update the color_type in + png_set_filler(). + Added png_set_add_alpha() that updates color type. + +Version 1.0.17rc1 and 1.2.7rc1 [September 4, 2004] + Revised png_set_strip_filler() to not remove alpha if color_type has alpha. + +Version 1.2.7 and 1.0.17 [September 12, 2004] + Added makefile.hp64 + Changed projects/msvc/png32ms.def to scripts/png32ms.def in makefile.cygwin + +Version 1.2.8beta1 [November 1, 2004] + Fixed bug in png_text_compress() that would fail to complete a large block. + Fixed bug, introduced in libpng-1.2.7, that overruns a buffer during + strip alpha operation in png_do_strip_filler(). + Added PNG_1_2_X definition in pngconf.h + Use #ifdef to comment out png_info_init in png.c and png_read_init in + pngread.c (as of 1.3.0) + +Version 1.2.8beta2 [November 2, 2004] + Reduce color_type to a nonalpha type after strip alpha operation in + png_do_strip_filler(). + +Version 1.2.8beta3 [November 3, 2004] + Revised definitions of PNG_MAX_UINT_32, PNG_MAX_SIZE, and PNG_MAXSUM + +Version 1.2.8beta4 [November 12, 2004] + Fixed (again) definition of PNG_LIBPNG_VER_DLLNUM in png.h (Cosmin). + Added PNG_LIBPNG_BUILD_PRIVATE in png.h (Cosmin). + Set png_ptr->zstream.data_type to Z_BINARY, to avoid unnecessary detection + of data type in deflate (Cosmin). + Deprecated but continue to support SPECIALBUILD and PRIVATEBUILD in favor of + PNG_LIBPNG_BUILD_SPECIAL_STRING and PNG_LIBPNG_BUILD_PRIVATE_STRING. + +Version 1.2.8beta5 [November 20, 2004] + Use png_ptr->flags instead of png_ptr->transformations to pass + PNG_STRIP_ALPHA info to png_do_strip_filler(), to preserve ABI + compatibility. + Revised handling of SPECIALBUILD, PRIVATEBUILD, + PNG_LIBPNG_BUILD_SPECIAL_STRING and PNG_LIBPNG_BUILD_PRIVATE_STRING. + +Version 1.2.8rc1 [November 24, 2004] + Moved handling of BUILD macros from pngconf.h to png.h + Added definition of PNG_LIBPNG_BASE_TYPE in png.h, inadvertently + omitted from beta5. + Revised scripts/pngw32.rc + Despammed mailing addresses by masking "@" with "at". + Inadvertently installed a supposedly faster test version of pngrutil.c + +Version 1.2.8rc2 [November 26, 2004] + Added two missing "\" in png.h + Change tests in pngread.c and pngpread.c to + if (png_ptr->transformations || (png_ptr->flags&PNG_FLAG_STRIP_ALPHA)) + png_do_read_transformations(png_ptr); + +Version 1.2.8rc3 [November 28, 2004] + Reverted pngrutil.c to version libpng-1.2.8beta5. + Added scripts/makefile.elf with supporting code in pngconf.h for symbol + versioning (John Bowler). + +Version 1.2.8rc4 [November 29, 2004] + Added projects/visualc7 (Simon-pierre). + +Version 1.2.8rc5 [November 29, 2004] + Fixed new typo in scripts/pngw32.rc + +Version 1.2.8 [December 3, 2004] + Removed projects/visualc7, added projects/visualc71. + +Version 1.2.9beta1 [February 21, 2006] + Initialized some structure members in pngwutil.c to avoid gcc-4.0.0 complaints + Revised man page and libpng.txt to make it clear that one should not call + png_read_end or png_write_end after png_read_png or png_write_png. + Updated references to png-mng-implement mailing list. + Fixed an incorrect typecast in pngrutil.c + Added PNG_NO_READ_SUPPORTED conditional for making a write-only library. + Added PNG_NO_WRITE_INTERLACING_SUPPORTED conditional. + Optimized alpha-inversion loops in pngwtran.c + Moved test for nonzero gamma outside of png_build_gamma_table() in pngrtran.c + Make sure num_trans is <= 256 before copying data in png_set_tRNS(). + Make sure num_palette is <= 256 before copying data in png_set_PLTE(). + Interchanged order of write_swap_alpha and write_invert_alpha transforms. + Added parentheses in the definition of PNG_LIBPNG_BUILD_TYPE (Cosmin). + Optimized zlib window flag (CINFO) in contrib/pngsuite/*.png (Cosmin). + Updated scripts/makefile.bc32 for Borland C++ 5.6 (Cosmin). + Exported png_get_uint_32, png_save_uint_32, png_get_uint_16, png_save_uint_16, + png_get_int_32, png_save_int_32, png_get_uint_31 (Cosmin). + Added type cast (png_byte) in png_write_sCAL() (Cosmin). + Fixed scripts/makefile.cygwin (Christian Biesinger, Cosmin). + Default iTXt support was inadvertently enabled. + +Version 1.2.9beta2 [February 21, 2006] + Check for png_rgb_to_gray and png_gray_to_rgb read transformations before + checking for png_read_dither in pngrtran.c + Revised checking of chromaticity limits to accommodate extended RGB + colorspace (John Denker). + Changed line endings in some of the project files to CRLF, even in the + "Unix" tar distributions (Cosmin). + Made png_get_int_32 and png_save_int_32 always available (Cosmin). + Updated scripts/pngos2.def, scripts/pngw32.def and projects/wince/png32ce.def + with the newly exported functions. + Eliminated distributions without the "configure" script. + Updated INSTALL instructions. + +Version 1.2.9beta3 [February 24, 2006] + Fixed CRCRLF line endings in contrib/visupng/VisualPng.dsp + Made libpng.pc respect EXEC_PREFIX (D. P. Kreil, J. Bowler) + Removed reference to pngasmrd.h from Makefile.am + Renamed CHANGES to ChangeLog. + Renamed LICENSE to COPYING. + Renamed ANNOUNCE to NEWS. + Created AUTHORS file. + +Version 1.2.9beta4 [March 3, 2006] + Changed definition of PKGCONFIG from $prefix/lib to $libdir in configure.ac + Reverted to filenames LICENSE and ANNOUNCE; removed AUTHORS and COPYING. + Removed newline from the end of some error and warning messages. + Removed test for sqrt() from configure.ac and configure. + Made swap tables in pngtrans.c PNG_CONST (Carlo Bramix). + Disabled default iTXt support that was inadvertently enabled in + libpng-1.2.9beta1. + Added "OS2" to list of systems that don't need underscores, in pnggccrd.c + Removed libpng version and date from *.c files. + +Version 1.2.9beta5 [March 4, 2006] + Removed trailing blanks from source files. + Put version and date of latest change in each source file, and changed + copyright year accordingly. + More cleanup of configure.ac, Makefile.am, and associated scripts. + Restored scripts/makefile.elf which was inadvertently deleted. + +Version 1.2.9beta6 [March 6, 2006] + Fixed typo (RELEASE) in configuration files. + +Version 1.2.9beta7 [March 7, 2006] + Removed libpng.vers and libpng.sym from libpng12_la_SOURCES in Makefile.am + Fixed inconsistent #ifdef's around png_sig_bytes() and png_set_sCAL_s() + in png.h. + Updated makefile.elf as suggested by debian. + Made cosmetic changes to some makefiles, adding LN_SF and other macros. + Made some makefiles accept "exec_prefix". + +Version 1.2.9beta8 [March 9, 2006] + Fixed some "#if defined (..." which should be "#if defined(..." + Bug introduced in libpng-1.2.8. + Fixed inconsistency in definition of png_default_read_data() + Restored blank that was lost from makefile.sggcc "clean" target in beta7. + Revised calculation of "current" and "major" for irix in ltmain.sh + Changed "mkdir" to "MKDIR_P" in some makefiles. + Separated PNG_EXPAND and PNG_EXPAND_tRNS. + Added png_set_expand_gray_1_2_4_to_8() and deprecated + png_set_gray_1_2_4_to_8() which also expands tRNS to alpha. + +Version 1.2.9beta9 [March 10, 2006] + Include "config.h" in pngconf.h when available. + Added some checks for NULL png_ptr or NULL info_ptr (timeless) + +Version 1.2.9beta10 [March 20, 2006] + Removed extra CR from contrib/visualpng/VisualPng.dsw (Cosmin) + Made pnggccrd.c PIC-compliant (Christian Aichinger). + Added makefile.mingw (Wolfgang Glas). + Revised pngconf.h MMX checking. + +Version 1.2.9beta11 [March 22, 2006] + Fixed out-of-order declaration in pngwrite.c that was introduced in beta9 + Simplified some makefiles by using LIBSO, LIBSOMAJ, and LIBSOVER macros. + +Version 1.2.9rc1 [March 31, 2006] + Defined PNG_USER_PRIVATEBUILD when including "pngusr.h" (Cosmin). + Removed nonsensical assertion check from pngtest.c (Cosmin). + +Version 1.2.9 [April 14, 2006] + Revised makefile.beos and added "none" selector in ltmain.sh + +Version 1.2.10beta1 [April 15, 2006] + Renamed "config.h" to "png_conf.h" and revised Makefile.am to add + -DPNG_BUILDING_LIBPNG to compile directive, and modified pngconf.h + to include png_conf.h only when PNG_BUILDING_LIBPNG is defined. + +Version 1.2.10beta2 [April 15, 2006] + Manually updated Makefile.in and configure. Changed png_conf.h.in + back to config.h. + +Version 1.2.10beta3 [April 15, 2006] + Change png_conf.h back to config.h in pngconf.h. + +Version 1.2.10beta4 [April 16, 2006] + Change PNG_BUILDING_LIBPNG to PNG_CONFIGURE_LIBPNG in config/Makefile*. + +Version 1.2.10beta5 [April 16, 2006] + Added a configure check for compiling assembler code in pnggccrd.c + +Version 1.2.10beta6 [April 17, 2006] + Revised the configure check for pnggccrd.c + Moved -DPNG_CONFIGURE_LIBPNG into @LIBPNG_DEFINES@ + Added @LIBPNG_DEFINES@ to arguments when building libpng.sym + +Version 1.2.10beta7 [April 18, 2006] + Change "exec_prefix=$prefix" to "exec_prefix=$(prefix)" in makefiles. + +Version 1.2.10rc1 [April 19, 2006] + Ensure pngconf.h doesn't define both PNG_USE_PNGGCCRD and PNG_USE_PNGVCRD + Fixed "LN_FS" typo in makefile.sco and makefile.solaris. + +Version 1.2.10rc2 [April 20, 2006] + Added a backslash between -DPNG_CONFIGURE_LIBPNG and -DPNG_NO_ASSEMBLER_CODE + in configure.ac and configure + Made the configure warning about versioned symbols less arrogant. + +Version 1.2.10rc3 [April 21, 2006] + Added a note in libpng.txt that png_set_sig_bytes(8) can be used when + writing an embedded PNG without the 8-byte signature. + Revised makefiles and configure to avoid making links to libpng.so.* + +Version 1.2.10 [April 23, 2006] + Reverted configure to "rc2" state. + +Version 1.2.11beta1 [May 31, 2006] + scripts/libpng.pc.in contained "configure" style version info and would + not work with makefiles. + The shared-library makefiles were linking to libpng.so.0 instead of + libpng.so.3 compatibility as the library. + +Version 1.2.11beta2 [June 2, 2006] + Increased sprintf buffer from 50 to 52 chars in pngrutil.c to avoid + buffer overflow. + Fixed bug in example.c (png_set_palette_rgb -> png_set_palette_to_rgb) + +Version 1.2.11beta3 [June 5, 2006] + Prepended "#! /bin/sh" to ltmail.sh and contrib/pngminus/*.sh (Cosmin). + Removed the accidental leftover Makefile.in~ (Cosmin). + Avoided potential buffer overflow and optimized buffer in + png_write_sCAL(), png_write_sCAL_s() (Cosmin). + Removed the include directories and libraries from CFLAGS and LDFLAGS + in scripts/makefile.gcc (Nelson A. de Oliveira, Cosmin). + +Version 1.2.11beta4 [June 6, 2006] + Allow zero-length IDAT chunks after the entire zlib datastream, but not + after another intervening chunk type. + +Version 1.0.19rc1, 1.2.11rc1 [June 13, 2006] + Deleted extraneous square brackets from [config.h] in configure.ac + +Version 1.0.19rc2, 1.2.11rc2 [June 14, 2006] + Added prototypes for PNG_INCH_CONVERSIONS functions to png.h + Revised INSTALL and autogen.sh + Fixed typo in several makefiles (-W1 should be -Wl) + Added typedef for png_int_32 and png_uint_32 on 64-bit systems. + +Version 1.0.19rc3, 1.2.11rc3 [June 15, 2006] + Removed the new typedefs for 64-bit systems (delay until version 1.4.0) + Added one zero element to png_gamma_shift[] array in pngrtran.c to avoid + reading out of bounds. + +Version 1.0.19rc4, 1.2.11rc4 [June 15, 2006] + Really removed the new typedefs for 64-bit systems. + +Version 1.0.19rc5, 1.2.11rc5 [June 22, 2006] + Removed png_sig_bytes entry from scripts/pngw32.def + +Version 1.0.19, 1.2.11 [June 26, 2006] + None. + +Version 1.0.20, 1.2.12 [June 27, 2006] + Really increased sprintf buffer from 50 to 52 chars in pngrutil.c to avoid + buffer overflow. + +Version 1.2.13beta1 [October 2, 2006] + Removed AC_FUNC_MALLOC from configure.ac + Work around Intel-Mac compiler bug by setting PNG_NO_MMX_CODE in pngconf.h + Change "logical" to "bitwise" throughout documentation. + Detect and fix attempt to write wrong iCCP profile length (CVE-2006-7244) + +Version 1.0.21, 1.2.13 [November 14, 2006] + Fix potential buffer overflow in sPLT chunk handler. + Fix Makefile.am to not try to link to noexistent files. + Check all exported functions for NULL png_ptr. + +Version 1.2.14beta1 [November 17, 2006] + Relocated three misplaced tests for NULL png_ptr. + Built Makefile.in with automake-1.9.6 instead of 1.9.2. + Build configure with autoconf-2.60 instead of 2.59 + +Version 1.2.14beta2 [November 17, 2006] + Added some typecasts in png_zalloc(). + +Version 1.2.14rc1 [November 20, 2006] + Changed "strtod" to "png_strtod" in pngrutil.c + +Version 1.0.22, 1.2.14 [November 27, 2006] + Added missing "$(srcdir)" in Makefile.am and Makefile.in + +Version 1.2.15beta1 [December 3, 2006] + Generated configure with autoconf-2.61 instead of 2.60 + Revised configure.ac to update libpng.pc and libpng-config. + +Version 1.2.15beta2 [December 3, 2006] + Always export MMX asm functions, just stubs if not building pnggccrd.c + +Version 1.2.15beta3 [December 4, 2006] + Add "png_bytep" typecast to profile while calculating length in pngwutil.c + +Version 1.2.15beta4 [December 7, 2006] + Added scripts/CMakeLists.txt + Changed PNG_NO_ASSEMBLER_CODE to PNG_NO_MMX_CODE in scripts, like 1.4.0beta + +Version 1.2.15beta5 [December 7, 2006] + Changed some instances of PNG_ASSEMBLER_* to PNG_MMX_* in pnggccrd.c + Revised scripts/CMakeLists.txt + +Version 1.2.15beta6 [December 13, 2006] + Revised scripts/CMakeLists.txt and configure.ac + +Version 1.2.15rc1 [December 18, 2006] + Revised scripts/CMakeLists.txt + +Version 1.2.15rc2 [December 21, 2006] + Added conditional #undef jmpbuf in pngtest.c to undo #define in AIX headers. + Added scripts/makefile.nommx + +Version 1.2.15rc3 [December 25, 2006] + Fixed shared library numbering error that was introduced in 1.2.15beta6. + +Version 1.2.15rc4 [December 27, 2006] + Fixed handling of rgb_to_gray when png_ptr->color.gray isn't set. + +Version 1.2.15rc5 [December 31, 2006] + Revised handling of rgb_to_gray. + +Version 1.2.15 [January 5, 2007] + Added some (unsigned long) typecasts in pngtest.c to avoid printing errors. + +Version 1.2.16beta1 [January 6, 2007] + Fix bugs in makefile.nommx + +Version 1.2.16beta2 [January 16, 2007] + Revised scripts/CMakeLists.txt + +Version 1.2.16 [January 31, 2007] + No changes. + +Version 1.2.17beta1 [March 6, 2007] + Revised scripts/CMakeLists.txt to install both shared and static libraries. + Deleted a redundant line from pngset.c. + +Version 1.2.17beta2 [April 26, 2007] + Relocated misplaced test for png_ptr == NULL in pngpread.c + Change "==" to "&" for testing PNG_RGB_TO_GRAY_ERR & PNG_RGB_TO_GRAY_WARN + flags. + Changed remaining instances of PNG_ASSEMBLER_* to PNG_MMX_* + Added pngerror() when write_IHDR fails in deflateInit2(). + Added "const" to some array declarations. + Mention examples of libpng usage in the libpng*.txt and libpng.3 documents. + +Version 1.2.17rc1 [May 4, 2007] + No changes. + +Version 1.2.17rc2 [May 8, 2007] + Moved several PNG_HAVE_* macros out of PNG_INTERNAL because applications + calling set_unknown_chunk_location() need them. + Changed transformation flag from PNG_EXPAND_tRNS to PNG_EXPAND in + png_set_expand_gray_1_2_4_to_8(). + Added png_ptr->unknown_chunk to hold working unknown chunk data, so it + can be free'ed in case of error. Revised unknown chunk handling in + pngrutil.c and pngpread.c to use this structure. + +Version 1.2.17rc3 [May 8, 2007] + Revised symbol-handling in configure script. + +Version 1.2.17rc4 [May 10, 2007] + Revised unknown chunk handling to avoid storing unknown critical chunks. + +Version 1.0.25 [May 15, 2007] +Version 1.2.17 [May 15, 2007] + Added "png_ptr->num_trans=0" before error return in png_handle_tRNS, + to eliminate a vulnerability (CVE-2007-2445, CERT VU#684664) + +Version 1.0.26 [May 15, 2007] +Version 1.2.18 [May 15, 2007] + Reverted the libpng-1.2.17rc3 change to symbol-handling in configure script + +Version 1.2.19beta1 [May 18, 2007] + Changed "const static" to "static PNG_CONST" everywhere, mostly undoing + change of libpng-1.2.17beta2. Changed other "const" to "PNG_CONST" + Changed some handling of unused parameters, to avoid compiler warnings. + "if (unused == NULL) return;" becomes "unused = unused". + +Version 1.2.19beta2 [May 18, 2007] + Only use the valid bits of tRNS value in png_do_expand() (Brian Cartier) + +Version 1.2.19beta3 [May 19, 2007] + Add some "png_byte" typecasts in png_check_keyword() and write new_key + instead of key in zTXt chunk (Kevin Ryde). + +Version 1.2.19beta4 [May 21, 2007] + Add png_snprintf() function and use it in place of sprint() for improved + defense against buffer overflows. + +Version 1.2.19beta5 [May 21, 2007] + Fixed png_handle_tRNS() to only use the valid bits of tRNS value. + Changed handling of more unused parameters, to avoid compiler warnings. + Removed some PNG_CONST in pngwutil.c to avoid compiler warnings. + +Version 1.2.19beta6 [May 22, 2007] + Added some #ifdef PNG_MMX_CODE_SUPPORTED where needed in pngvcrd.c + Added a special "_MSC_VER" case that defines png_snprintf to _snprintf + +Version 1.2.19beta7 [May 22, 2007] + Squelched png_squelch_warnings() in pnggccrd.c and added + an #ifdef PNG_MMX_CODE_SUPPORTED block around the declarations that caused + the warnings that png_squelch_warnings was squelching. + +Version 1.2.19beta8 [May 22, 2007] + Removed __MMX__ from test in pngconf.h. + +Version 1.2.19beta9 [May 23, 2007] + Made png_squelch_warnings() available via PNG_SQUELCH_WARNINGS macro. + Revised png_squelch_warnings() so it might work. + Updated makefile.sgcc and makefile.solaris; added makefile.solaris-x86. + +Version 1.2.19beta10 [May 24, 2007] + Resquelched png_squelch_warnings(), use "__attribute__((used))" instead. + +Version 1.4.0beta1 [April 20, 2006] + Enabled iTXt support (changes png_struct, thus requires so-number change). + Cleaned up PNG_ASSEMBLER_CODE_SUPPORTED vs PNG_MMX_CODE_SUPPORTED + Eliminated PNG_1_0_X and PNG_1_2_X macros. + Removed deprecated functions png_read_init, png_write_init, png_info_init, + png_permit_empty_plte, png_set_gray_1_2_4_to_8, png_check_sig, and + removed the deprecated macro PNG_MAX_UINT. + Moved "PNG_INTERNAL" parts of png.h and pngconf.h into pngintrn.h + Removed many WIN32_WCE #ifdefs (Cosmin). + Reduced dependency on C-runtime library when on Windows (Simon-Pierre) + Replaced sprintf() with png_sprintf() (Simon-Pierre) + +Version 1.4.0beta2 [April 20, 2006] + Revised makefiles and configure to avoid making links to libpng.so.* + Moved some leftover MMX-related defines from pngconf.h to pngintrn.h + Updated scripts/pngos2.def, pngw32.def, and projects/wince/png32ce.def + +Version 1.4.0beta3 [May 10, 2006] + Updated scripts/pngw32.def to comment out MMX functions. + Added PNG_NO_GET_INT_32 and PNG_NO_SAVE_INT_32 macros. + Scripts/libpng.pc.in contained "configure" style version info and would + not work with makefiles. + Revised pngconf.h and added pngconf.h.in, so makefiles and configure can + pass defines to libpng and applications. + +Version 1.4.0beta4 [May 11, 2006] + Revised configure.ac, Makefile.am, and many of the makefiles to write + their defines in pngconf.h. + +Version 1.4.0beta5 [May 15, 2006] + Added a missing semicolon in Makefile.am and Makefile.in + Deleted extraneous square brackets from configure.ac + +Version 1.4.0beta6 [June 2, 2006] + Increased sprintf buffer from 50 to 52 chars in pngrutil.c to avoid + buffer overflow. + Changed sonum from 0 to 1. + Removed unused prototype for png_check_sig() from png.h + +Version 1.4.0beta7 [June 16, 2006] + Exported png_write_sig (Cosmin). + Optimized buffer in png_handle_cHRM() (Cosmin). + Set pHYs = 2835 x 2835 pixels per meter, and added + sCAL = 0.352778e-3 x 0.352778e-3 meters, in pngtest.png (Cosmin). + Added png_set_benign_errors(), png_benign_error(), png_chunk_benign_error(). + Added typedef for png_int_32 and png_uint_32 on 64-bit systems. + Added "(unsigned long)" typecast on png_uint_32 variables in printf lists. + +Version 1.4.0beta8 [June 22, 2006] + Added demonstration of user chunk support in pngtest.c, to support the + public sTER chunk and a private vpAg chunk. + +Version 1.4.0beta9 [July 3, 2006] + Removed ordinals from scripts/pngw32.def and removed png_info_int and + png_set_gray_1_2_4_to_8 entries. + Inline call of png_get_uint_32() in png_get_uint_31(). + Use png_get_uint_31() to get vpAg width and height in pngtest.c + Removed WINCE and Netware projects. + Removed standalone Y2KINFO file. + +Version 1.4.0beta10 [July 12, 2006] + Eliminated automatic copy of pngconf.h to pngconf.h.in from configure and + some makefiles, because it was not working reliably. Instead, distribute + pngconf.h.in along with pngconf.h and cause configure and some of the + makefiles to update pngconf.h from pngconf.h.in. + Added pngconf.h to DEPENDENCIES in Makefile.am + +Version 1.4.0beta11 [August 19, 2006] + Removed AC_FUNC_MALLOC from configure.ac. + Added a warning when writing iCCP profile with mismatched profile length. + Patched pnggccrd.c to assemble on x86_64 platforms. + Moved chunk header reading into a separate function png_read_chunk_header() + in pngrutil.c. The chunk header (len+sig) is now serialized in a single + operation (Cosmin). + Implemented support for I/O states. Added png_ptr member io_state, and + functions png_get_io_chunk_name() and png_get_io_state() in pngget.c + (Cosmin). + Added png_get_io_chunk_name and png_get_io_state to scripts/*.def (Cosmin). + Renamed scripts/pngw32.* to scripts/pngwin.* (Cosmin). + Removed the include directories and libraries from CFLAGS and LDFLAGS + in scripts/makefile.gcc (Cosmin). + Used png_save_uint_32() to set vpAg width and height in pngtest.c (Cosmin). + Cast to proper type when getting/setting vpAg units in pngtest.c (Cosmin). + Added pngintrn.h to the Visual C++ projects (Cosmin). + Removed scripts/list (Cosmin). + Updated copyright year in scripts/pngwin.def (Cosmin). + Removed PNG_TYPECAST_NULL and used standard NULL consistently (Cosmin). + Disallowed the user to redefine png_size_t, and enforced a consistent use + of png_size_t across libpng (Cosmin). + Changed the type of png_ptr->rowbytes, PNG_ROWBYTES() and friends + to png_size_t (Cosmin). + Removed png_convert_size() and replaced png_sizeof with sizeof (Cosmin). + Removed some unnecessary type casts (Cosmin). + Changed prototype of png_get_compression_buffer_size() and + png_set_compression_buffer_size() to work with png_size_t instead of + png_uint_32 (Cosmin). + Removed png_memcpy_check() and png_memset_check() (Cosmin). + Fixed a typo (png_byte --> png_bytep) in libpng.3 and libpng.txt (Cosmin). + Clarified that png_zalloc() does not clear the allocated memory, + and png_zalloc() and png_zfree() cannot be PNGAPI (Cosmin). + Renamed png_mem_size_t to png_alloc_size_t, fixed its definition in + pngconf.h, and used it in all memory allocation functions (Cosmin). + Renamed pngintrn.h to pngpriv.h, added a comment at the top of the file + mentioning that the symbols declared in that file are private, and + updated the scripts and the Visual C++ projects accordingly (Cosmin). + Removed circular references between pngconf.h and pngconf.h.in in + scripts/makefile.vc*win32 (Cosmin). + Removing trailing '.' from the warning and error messages (Cosmin). + Added pngdefs.h that is built by makefile or configure, instead of + pngconf.h.in (Glenn). + Detect and fix attempt to write wrong iCCP profile length. + +Version 1.4.0beta12 [October 19, 2006] + Changed "logical" to "bitwise" in the documentation. + Work around Intel-Mac compiler bug by setting PNG_NO_MMX_CODE in pngconf.h + Add a typecast to stifle compiler warning in pngrutil.c + +Version 1.4.0beta13 [November 10, 2006] + Fix potential buffer overflow in sPLT chunk handler. + Fix Makefile.am to not try to link to noexistent files. + +Version 1.4.0beta14 [November 15, 2006] + Check all exported functions for NULL png_ptr. + +Version 1.4.0beta15 [November 17, 2006] + Relocated two misplaced tests for NULL png_ptr. + Built Makefile.in with automake-1.9.6 instead of 1.9.2. + Build configure with autoconf-2.60 instead of 2.59 + Add "install: all" in Makefile.am so "configure; make install" will work. + +Version 1.4.0beta16 [November 17, 2006] + Added a typecast in png_zalloc(). + +Version 1.4.0beta17 [December 4, 2006] + Changed "new_key[79] = '\0';" to "(*new_key)[79] = '\0';" in pngwutil.c + Add "png_bytep" typecast to profile while calculating length in pngwutil.c + +Version 1.4.0beta18 [December 7, 2006] + Added scripts/CMakeLists.txt + +Version 1.4.0beta19 [May 16, 2007] + Revised scripts/CMakeLists.txt + Rebuilt configure and Makefile.in with newer tools. + Added conditional #undef jmpbuf in pngtest.c to undo #define in AIX headers. + Added scripts/makefile.nommx + +Version 1.4.0beta20 [July 9, 2008] + Moved several PNG_HAVE_* macros from pngpriv.h to png.h because applications + calling set_unknown_chunk_location() need them. + Moved several macro definitions from pngpriv.h to pngconf.h + Merge with changes to the 1.2.X branch, as of 1.2.30beta04. + Deleted all use of the MMX assembler code and Intel-licensed optimizations. + Revised makefile.mingw + +Version 1.4.0beta21 [July 21, 2008] + Moved local array "chunkdata" from pngrutil.c to the png_struct, so + it will be freed by png_read_destroy() in case of a read error (Kurt + Christensen). + +Version 1.4.0beta22 [July 21, 2008] + Change "purpose" and "buffer" to png_ptr->chunkdata to avoid memory leaking. + +Version 1.4.0beta23 [July 22, 2008] + Change "chunkdata = NULL" to "png_ptr->chunkdata = NULL" several places in + png_decompress_chunk(). + +Version 1.4.0beta24 [July 25, 2008] + Change all remaining "chunkdata" to "png_ptr->chunkdata" in + png_decompress_chunk(), and remove "chunkdata" from parameter list. + Put a call to png_check_chunk_name() in png_read_chunk_header(). + Revised png_check_chunk_name() to reject a name with a lowercase 3rd byte. + Removed two calls to png_check_chunk_name() occurring later in the process. + Define PNG_NO_ERROR_NUMBERS by default in pngconf.h + +Version 1.4.0beta25 [July 30, 2008] + Added a call to png_check_chunk_name() in pngpread.c + Reverted png_check_chunk_name() to accept a name with a lowercase 3rd byte. + Added png_push_have_buffer() function to pngpread.c + Eliminated PNG_BIG_ENDIAN_SUPPORTED and associated png_get_* macros. + Made inline expansion of png_get_*() optional with PNG_USE_READ_MACROS. + Eliminated all PNG_USELESS_TESTS and PNG_CORRECT_PALETTE_SUPPORTED code. + Synced contrib directory and configure files with libpng-1.2.30beta06. + Eliminated no-longer-used pngdefs.h (but it's still built in the makefiles) + Relocated a misplaced "#endif /* PNG_NO_WRITE_FILTER */" in pngwutil.c + +Version 1.4.0beta26 [August 4, 2008] + Removed png_push_have_buffer() function in pngpread.c. It increased the + compiled library size slightly. + Changed "-Wall" to "-W -Wall" in the CFLAGS in all makefiles (Cosmin Truta) + Declared png_ptr "volatile" in pngread.c and pngwrite.c to avoid warnings. + Updated contrib/visupng/cexcept.h to version 2.0.1 + Added PNG_LITERAL_CHARACTER macros for #, [, and ]. + +Version 1.4.0beta27 [August 5, 2008] + Revised usage of PNG_LITERAL_SHARP in pngerror.c. + Moved newline character from individual png_debug messages into the + png_debug macros. + Allow user to #define their own png_debug, png_debug1, and png_debug2. + +Version 1.4.0beta28 [August 5, 2008] + Revised usage of PNG_LITERAL_SHARP in pngerror.c. + Added PNG_STRING_NEWLINE macro + +Version 1.4.0beta29 [August 9, 2008] + Revised usage of PNG_STRING_NEWLINE to work on non-ISO compilers. + Added PNG_STRING_COPYRIGHT macro. + Added non-ISO versions of png_debug macros. + +Version 1.4.0beta30 [August 14, 2008] + Added premultiplied alpha feature (Volker Wiendl). + +Version 1.4.0beta31 [August 18, 2008] + Moved png_set_premultiply_alpha from pngtrans.c to pngrtran.c + Removed extra crc check at the end of png_handle_cHRM(). Bug introduced + in libpng-1.4.0beta20. + +Version 1.4.0beta32 [August 19, 2008] + Added PNG_WRITE_FLUSH_SUPPORTED block around new png_flush() call. + Revised PNG_NO_STDIO version of png_write_flush() + +Version 1.4.0beta33 [August 20, 2008] + Added png_get|set_chunk_cache_max() to limit the total number of sPLT, + text, and unknown chunks that can be stored. + +Version 1.4.0beta34 [September 6, 2008] + Shortened tIME_string to 29 bytes in pngtest.c + Fixed off-by-one error introduced in png_push_read_zTXt() function in + libpng-1.2.30beta04/pngpread.c (Harald van Dijk) + +Version 1.4.0beta35 [October 6, 2008] + Changed "trans_values" to "trans_color". + Changed so-number from 0 to 14. Some OS do not like 0. + Revised makefile.darwin to fix shared library numbering. + Change png_set_gray_1_2_4_to_8() to png_set_expand_gray_1_2_4_to_8() + in example.c (debian bug report) + +Version 1.4.0beta36 [October 25, 2008] + Sync with tEXt vulnerability fix in libpng-1.2.33rc02. + +Version 1.4.0beta37 [November 13, 2008] + Added png_check_cHRM in png.c and moved checking from pngget.c, pngrutil.c, + and pngwrite.c + +Version 1.4.0beta38 [November 22, 2008] + Added check for zero-area RGB cHRM triangle in png_check_cHRM() and + png_check_cHRM_fixed(). + +Version 1.4.0beta39 [November 23, 2008] + Revised png_warning() to write its message on standard output by default + when warning_fn is NULL. + +Version 1.4.0beta40 [November 24, 2008] + Eliminated png_check_cHRM(). Instead, always use png_check_cHRM_fixed(). + In png_check_cHRM_fixed(), ensure white_y is > 0, and removed redundant + check for all-zero coordinates that is detected by the triangle check. + +Version 1.4.0beta41 [November 26, 2008] + Fixed string vs pointer-to-string error in png_check_keyword(). + Rearranged test expressions in png_check_cHRM_fixed() to avoid internal + overflows. + Added PNG_NO_CHECK_cHRM conditional. + +Version 1.4.0beta42, 43 [December 1, 2008] + Merge png_debug with version 1.2.34beta04. + +Version 1.4.0beta44 [December 6, 2008] + Removed redundant check for key==NULL before calling png_check_keyword() + to ensure that new_key gets initialized and removed extra warning + (Merge with version 1.2.34beta05 -- Arvan Pritchard). + +Version 1.4.0beta45 [December 9, 2008] + In png_write_png(), respect the placement of the filler bytes in an earlier + call to png_set_filler() (Jim Barry). + +Version 1.4.0beta46 [December 10, 2008] + Undid previous change and added PNG_TRANSFORM_STRIP_FILLER_BEFORE and + PNG_TRANSFORM_STRIP_FILLER_AFTER conditionals and deprecated + PNG_TRANSFORM_STRIP_FILLER (Jim Barry). + +Version 1.4.0beta47 [December 15, 2008] + Support for dithering was disabled by default, because it has never + been well tested and doesn't work very well. The code has not + been removed, however, and can be enabled by building libpng with + PNG_READ_DITHER_SUPPORTED defined. + +Version 1.4.0beta48 [February 14, 2009] + Added new exported function png_calloc(). + Combined several instances of png_malloc(); png_memset() into png_calloc(). + Removed prototype for png_freeptr() that was added in libpng-1.4.0beta24 + but was never defined. + +Version 1.4.0beta49 [February 28, 2009] + Added png_fileno() macro to pngconf.h, used in pngwio.c + Corrected order of #ifdef's in png_debug definition in png.h + Fixed bug introduced in libpng-1.4.0beta48 with the memset arguments + for pcal_params. + Fixed order of #ifdef directives in the png_debug defines in png.h + (bug introduced in libpng-1.2.34/1.4.0beta29). + Revised comments in png_set_read_fn() and png_set_write_fn(). + +Version 1.4.0beta50 [March 18, 2009] + Use png_calloc() instead of png_malloc() to allocate big_row_buf when + reading an interlaced file, to avoid a possible UMR. + Undid revision of PNG_NO_STDIO version of png_write_flush(). Users + having trouble with fflush() can build with PNG_NO_WRITE_FLUSH defined + or supply their own flush_fn() replacement. + Revised libpng*.txt and png.h documentation about use of png_write_flush() + and png_set_write_fn(). + Removed fflush() from pngtest.c. + Added "#define PNG_NO_WRITE_FLUSH" to contrib/pngminim/encoder/pngusr.h + +Version 1.4.0beta51 [March 21, 2009] + Removed new png_fileno() macro from pngconf.h . + +Version 1.4.0beta52 [March 27, 2009] + Relocated png_do_chop() ahead of building gamma tables in pngrtran.c + This avoids building 16-bit gamma tables unnecessarily. + Removed fflush() from pngtest.c. + Added "#define PNG_NO_WRITE_FLUSH" to contrib/pngminim/encoder/pngusr.h + Added a section on differences between 1.0.x and 1.2.x to libpng.3/libpng.txt + +Version 1.4.0beta53 [April 1, 2009] + Removed some remaining MMX macros from pngpriv.h + Fixed potential memory leak of "new_name" in png_write_iCCP() (Ralph Giles) + +Version 1.4.0beta54 [April 13, 2009] + Added "ifndef PNG_SKIP_SETJMP_CHECK" block in pngconf.h to allow + application code writers to bypass the check for multiple inclusion + of setjmp.h when they know that it is safe to ignore the situation. + Eliminated internal use of setjmp() in pngread.c and pngwrite.c + Reordered ancillary chunks in pngtest.png to be the same as what + pngtest now produces, and made some cosmetic changes to pngtest output. + Eliminated deprecated png_read_init_3() and png_write_init_3() functions. + +Version 1.4.0beta55 [April 15, 2009] + Simplified error handling in pngread.c and pngwrite.c by putting + the new png_read_cleanup() and png_write_cleanup() functions inline. + +Version 1.4.0beta56 [April 25, 2009] + Renamed "user_chunk_data" to "my_user_chunk_data" in pngtest.c to suppress + "shadowed declaration" warning from gcc-4.3.3. + Renamed "gamma" to "png_gamma" in pngset.c to avoid "shadowed declaration" + warning about a global "gamma" variable in math.h on some platforms. + +Version 1.4.0beta57 [May 2, 2009] + Removed prototype for png_freeptr() that was added in libpng-1.4.0beta24 + but was never defined (again). + Rebuilt configure scripts with autoconf-2.63 instead of 2.62 + Removed pngprefs.h and MMX from makefiles + +Version 1.4.0beta58 [May 14, 2009] + Changed pngw32.def to pngwin.def in makefile.mingw (typo was introduced + in beta57). + Clarified usage of sig_bit versus sig_bit_p in example.c (Vincent Torri) + +Version 1.4.0beta59 [May 15, 2009] + Reformated sources in libpng style (3-space intentation, comment format) + Fixed typo in libpng docs (PNG_FILTER_AVE should be PNG_FILTER_AVG) + Added sections about the git repository and our coding style to the + documentation + Relocated misplaced #endif in pngwrite.c, sCAL chunk handler. + +Version 1.4.0beta60 [May 19, 2009] + Conditionally compile png_read_finish_row() which is not used by + progressive readers. + Added contrib/pngminim/preader to demonstrate building minimal progressive + decoder, based on contrib/gregbook with embedded libpng and zlib. + +Version 1.4.0beta61 [May 20, 2009] + In contrib/pngminim/*, renamed "makefile.std" to "makefile", since there + is only one makefile in those directories, and revised the README files + accordingly. + More reformatting of comments, mostly to capitalize sentences. + +Version 1.4.0beta62 [June 2, 2009] + Added "#define PNG_NO_WRITE_SWAP" to contrib/pngminim/encoder/pngusr.h + and "define PNG_NO_READ_SWAP" to decoder/pngusr.h and preader/pngusr.h + Reformatted several remaining "else statement" into two lines. + Added a section to the libpng documentation about using png_get_io_ptr() + in configure scripts to detect the presence of libpng. + +Version 1.4.0beta63 [June 15, 2009] + Revised libpng*.txt and libpng.3 to mention calling png_set_IHDR() + multiple times and to specify the sample order in the tRNS chunk, + because the ISO PNG specification has a typo in the tRNS table. + Changed several PNG_UNKNOWN_CHUNK_SUPPORTED to + PNG_HANDLE_AS_UNKNOWN_SUPPORTED, to make the png_set_keep mechanism + available for ignoring known chunks even when not saving unknown chunks. + Adopted preference for consistent use of "#ifdef" and "#ifndef" versus + "#if defined()" and "if !defined()" where possible. + +Version 1.4.0beta64 [June 24, 2009] + Eliminated PNG_LEGACY_SUPPORTED code. + Moved the various unknown chunk macro definitions outside of the + PNG_READ|WRITE_ANCILLARY_CHUNK_SUPPORTED blocks. + +Version 1.4.0beta65 [June 26, 2009] + Added a reference to the libpng license in each file. + +Version 1.4.0beta66 [June 27, 2009] + Refer to the libpng license instead of the libpng license in each file. + +Version 1.4.0beta67 [July 6, 2009] + Relocated INVERT_ALPHA within png_read_png() and png_write_png(). + Added high-level API transform PNG_TRANSFORM_GRAY_TO_RGB. + Added an "xcode" project to the projects directory (Alam Arias). + +Version 1.4.0beta68 [July 19, 2009] + Avoid some tests in filter selection in pngwutil.c + +Version 1.4.0beta69 [July 25, 2009] + Simplified the new filter-selection test. This runs faster in the + common "PNG_ALL_FILTERS" and PNG_FILTER_NONE cases. + Removed extraneous declaration from the new call to png_read_gray_to_rgb() + (bug introduced in libpng-1.4.0beta67). + Fixed up xcode project (Alam Arias) + Added a prototype for png_64bit_product() in png.c + +Version 1.4.0beta70 [July 27, 2009] + Avoid a possible NULL dereference in debug build, in png_set_text_2(). + (bug introduced in libpng-0.95, discovered by Evan Rouault) + +Version 1.4.0beta71 [July 29, 2009] + Rebuilt configure scripts with autoconf-2.64. + +Version 1.4.0beta72 [August 1, 2009] + Replaced *.tar.lzma with *.tar.xz in distribution. Get the xz codec + from . + +Version 1.4.0beta73 [August 1, 2009] + Reject attempt to write iCCP chunk with negative embedded profile length + (JD Chen) (CVE-2009-5063). + +Version 1.4.0beta74 [August 8, 2009] + Changed png_ptr and info_ptr member "trans" to "trans_alpha". + +Version 1.4.0beta75 [August 21, 2009] + Removed an extra png_debug() recently added to png_write_find_filter(). + Fixed incorrect #ifdef in pngset.c regarding unknown chunk support. + +Version 1.4.0beta76 [August 22, 2009] + Moved an incorrectly located test in png_read_row() in pngread.c + +Version 1.4.0beta77 [August 27, 2009] + Removed lpXYZ.tar.bz2 (with CRLF), KNOWNBUG, libpng-x.y.z-KNOWNBUG.txt, + and the "noconfig" files from the distribution. + Moved CMakeLists.txt from scripts into the main libpng directory. + Various bugfixes and improvements to CMakeLists.txt (Philip Lowman) + +Version 1.4.0beta78 [August 31, 2009] + Converted all PNG_NO_* tests to PNG_*_SUPPORTED everywhere except pngconf.h + Eliminated PNG_NO_FREE_ME and PNG_FREE_ME_SUPPORTED macros. + Use png_malloc plus a loop instead of png_calloc() to initialize + row_pointers in png_read_png(). + +Version 1.4.0beta79 [September 1, 2009] + Eliminated PNG_GLOBAL_ARRAYS and PNG_LOCAL_ARRAYS; always use local arrays. + Eliminated PNG_CALLOC_SUPPORTED macro and always provide png_calloc(). + +Version 1.4.0beta80 [September 17, 2009] + Removed scripts/libpng.icc + Changed typecast of filler from png_byte to png_uint_16 in png_set_filler(). + (Dennis Gustafsson) + Fixed typo introduced in beta78 in pngtest.c ("#if def " should be "#ifdef ") + +Version 1.4.0beta81 [September 23, 2009] + Eliminated unused PNG_FLAG_FREE_* defines from pngpriv.h + Expanded TAB characters in pngrtran.c + Removed PNG_CONST from all "PNG_CONST PNG_CHNK" declarations to avoid + compiler complaints about doubly declaring things "const". + Changed all "#if [!]defined(X)" to "if[n]def X" where possible. + Eliminated unused png_ptr->row_buf_size + +Version 1.4.0beta82 [September 25, 2009] + Moved redundant IHDR checking into new png_check_IHDR() in png.c + and report all errors found in the IHDR data. + Eliminated useless call to png_check_cHRM() from pngset.c + +Version 1.4.0beta83 [September 25, 2009] + Revised png_check_IHDR() to eliminate bogus complaint about filter_type. + +Version 1.4.0beta84 [September 30, 2009] + Fixed some inconsistent indentation in pngconf.h + Revised png_check_IHDR() to add a test for width variable less than 32-bit. + +Version 1.4.0beta85 [October 1, 2009] + Revised png_check_IHDR() again, to check info_ptr members instead of + the contents of the returned parameters. + +Version 1.4.0beta86 [October 9, 2009] + Updated the "xcode" project (Alam Arias). + Eliminated a shadowed declaration of "pp" in png_handle_sPLT(). + +Version 1.4.0rc01 [October 19, 2009] + Trivial cosmetic changes. + +Version 1.4.0beta87 [October 30, 2009] + Moved version 1.4.0 back into beta. + +Version 1.4.0beta88 [October 30, 2009] + Revised libpng*.txt section about differences between 1.2.x and 1.4.0 + because most of the new features have now been ported back to 1.2.41 + +Version 1.4.0beta89 [November 1, 2009] + More bugfixes and improvements to CMakeLists.txt (Philip Lowman) + Removed a harmless extra png_set_invert_alpha() from pngwrite.c + Apply png_user_chunk_cache_max within png_decompress_chunk(). + Merged libpng-1.2.41.txt with libpng-1.4.0.txt where appropriate. + +Version 1.4.0beta90 [November 2, 2009] + Removed all remaining WIN32_WCE #ifdefs except those involving the + time.h "tm" structure + +Version 1.4.0beta91 [November 3, 2009] + Updated scripts/pngw32.def and projects/wince/png32ce.def + Copied projects/wince/png32ce.def to the scripts directory. + Added scripts/makefile.wce + Patched ltmain.sh for wince support. + Added PNG_CONVERT_tIME_SUPPORTED macro. + +Version 1.4.0beta92 [November 4, 2009] + Make inclusion of time.h in pngconf.h depend on PNG_CONVERT_tIME_SUPPORTED + Make #define PNG_CONVERT_tIME_SUPPORTED depend on PNG_WRITE_tIME_SUPPORTED + Revised libpng*.txt to describe differences from 1.2.40 to 1.4.0 (instead + of differences from 1.2.41 to 1.4.0) + +Version 1.4.0beta93 [November 7, 2009] + Added PNG_DEPSTRUCT, PNG_DEPRECATED, PNG_USE_RESULT, PNG_NORETURN, and + PNG_ALLOCATED macros to detect deprecated direct access to the + png_struct or info_struct members and other deprecated usage in + applications (John Bowler). + Updated scripts/makefile* to add "-DPNG_CONFIGURE_LIBPNG" to CFLAGS, + to prevent warnings about direct access to png structs by libpng + functions while building libpng. They need to be tested, especially + those using compilers other than gcc. + Updated projects/visualc6 and visualc71 with "/d PNG_CONFIGURE_LIBPNG". + They should work but still need to be updated to remove + references to pnggccrd.c or pngvcrd.c and ASM building. + Added README.txt to the beos, cbuilder5, netware, and xcode projects warning + that they need to be updated, to remove references to pnggccrd.c and + pngvcrd.c and to depend on pngpriv.h + Removed three direct references to read_info_ptr members in pngtest.c + that were detected by the new PNG_DEPSTRUCT macro. + Moved the png_debug macro definitions and the png_read_destroy(), + png_write_destroy() and png_far_to_near() prototypes from png.h + to pngpriv.h (John Bowler) + Moved the synopsis lines for png_read_destroy(), png_write_destroy() + png_debug(), png_debug1(), and png_debug2() from libpng.3 to libpngpf.3. + +Version 1.4.0beta94 [November 9, 2009] + Removed the obsolete, unused pnggccrd.c and pngvcrd.c files. + Updated CMakeLists.txt to add "-DPNG_CONFIGURE_LIBPNG" to the definitions. + Removed dependency of pngtest.o on pngpriv.h in the makefiles. + Only #define PNG_DEPSTRUCT, etc. in pngconf.h if not already defined. + +Version 1.4.0beta95 [November 10, 2009] + Changed png_check_sig() to !png_sig_cmp() in contrib programs. + Added -DPNG_CONFIGURE_LIBPNG to contrib/pngminm/*/makefile + Changed png_check_sig() to !png_sig_cmp() in contrib programs. + Corrected the png_get_IHDR() call in contrib/gregbook/readpng2.c + Changed pngminim/*/gather.sh to stop trying to remove pnggccrd.c and pngvcrd.c + Added dependency on pngpriv.h in contrib/pngminim/*/makefile + +Version 1.4.0beta96 [November 12, 2009] + Renamed scripts/makefile.wce to scripts/makefile.cegcc + Revised Makefile.am to use libpng.sys while building libpng.so + so that only PNG_EXPORT functions are exported. + Removed the deprecated png_check_sig() function/macro. + Removed recently removed function names from scripts/*.def + Revised pngtest.png to put chunks in the same order written by pngtest + (evidently the same change made in libpng-1.0beta54 was lost). + Added PNG_PRIVATE macro definition in pngconf.h for possible future use. + +Version 1.4.0beta97 [November 13, 2009] + Restored pngtest.png to the libpng-1.4.0beta7 version. + Removed projects/beos and netware.txt; no one seems to be supporting them. + Revised Makefile.in + +Version 1.4.0beta98 [November 13, 2009] + Added the "xcode" project to zip distributions, + Fixed a typo in scripts/pngwin.def introduced in beta97. + +Version 1.4.0beta99 [November 14, 2009] + Moved libpng-config.in and libpng.pc-configure.in out of the scripts + directory, to libpng-config.in and libpng-pc.in, respectively, and + modified Makefile.am and configure.ac accordingly. Now "configure" + needs nothing from the "scripts" directory. + Avoid redefining PNG_CONST in pngconf.h + +Version 1.4.0beta100 [November 14, 2009] + Removed ASM builds from projects/visualc6 and projects/visualc71 + Removed scripts/makefile.nommx and makefile.vcawin32 + Revised CMakeLists.txt to account for new location of libpng-config.in + and libpng-pc.in + Updated INSTALL to reflect removal and relocation of files. + +Version 1.4.0beta101 [November 14, 2009] + Restored the binary files (*.jpg, *.png, some project files) that were + accidentally deleted from the zip and 7z distributions when the xcode + project was added. + +Version 1.4.0beta102 [November 18, 2009] + Added libpng-config.in and libpng-pc.in to the zip and 7z distributions. + Fixed a typo in projects/visualc6/pngtest.dsp, introduced in beta100. + Moved descriptions of makefiles and other scripts out of INSTALL into + scripts/README.txt + Updated the copyright year in scripts/pngwin.rc from 2006 to 2009. + +Version 1.4.0beta103 [November 21, 2009] + Removed obsolete comments about ASM from projects/visualc71/README_zlib.txt + Align row_buf on 16-byte boundary in memory. + Restored the PNG_WRITE_FLUSH_AFTER_IEND_SUPPORTED guard around the call + to png_flush() after png_write_IEND(). See 1.4.0beta32, 1.4.0beta50 + changes above and 1.2.30, 1.2.30rc01 and rc03 in 1.2.41 CHANGES. Someone + needs this feature. + Make the 'png_jmpbuf' macro expand to a call that records the correct + longjmp function as well as returning a pointer to the setjmp + jmp_buf buffer, and marked direct access to jmpbuf 'deprecated'. + (John Bowler) + +Version 1.4.0beta104 [November 22, 2009] + Removed png_longjmp_ptr from scripts/*.def and libpng.3 + Rebuilt configure scripts with autoconf-2.65 + +Version 1.4.0beta105 [November 25, 2009] + Use fast integer PNG_DIVIDE_BY_255() or PNG_DIVIDE_BY_65535() + to accomplish alpha premultiplication when + PNG_READ_COMPOSITE_NODIV_SUPPORTED is defined. + Changed "/255" to "/255.0" in background calculations to make it clear + that the 255 is used as a double. + +Version 1.4.0beta106 [November 27, 2009] + Removed premultiplied alpha feature. + +Version 1.4.0beta107 [December 4, 2009] + Updated README + Added "#define PNG_NO_PEDANTIC_WARNINGS" in the libpng source files. + Removed "-DPNG_CONFIGURE_LIBPNG" from the makefiles and projects. + Revised scripts/makefile.netbsd, makefile.openbsd, and makefile.sco + to put png.h and pngconf.h in $prefix/include, like the other scripts, + instead of in $prefix/include/libpng. Also revised makefile.sco + to put them in $prefix/include/libpng15 instead of in + $prefix/include/libpng/libpng15. + +Version 1.4.0beta108 [December 11, 2009] + Removed leftover "-DPNG_CONFIGURE_LIBPNG" from contrib/pngminim/*/makefile + Relocated png_do_chop() to its original position in pngrtran.c; the + change in version 1.2.41beta08 caused transparency to be handled wrong + in some 16-bit datastreams (Yusaku Sugai). + +Version 1.4.0beta109 [December 13, 2009] + Added "bit_depth" parameter to the private png_build_gamma_table() function. + Pass bit_depth=8 to png_build_gamma_table() when bit_depth is 16 but the + PNG_16_TO_8 transform has been set, to avoid unnecessary build of 16-bit + tables. + +Version 1.4.0rc02 [December 20, 2009] + Declared png_cleanup_needed "volatile" in pngread.c and pngwrite.c + +Version 1.4.0rc03 [December 22, 2009] + Renamed libpng-pc.in back to libpng.pc.in and revised CMakeLists.txt + (revising the change in 1.4.0beta99) + +Version 1.4.0rc04 [December 25, 2009] + Swapped PNG_UNKNOWN_CHUNKS_SUPPORTED and PNG_HANDLE_AS_UNKNOWN_SUPPORTED + in pngset.c to be consistent with other changes in version 1.2.38. + +Version 1.4.0rc05 [December 25, 2009] + Changed "libpng-pc.in" to "libpng.pc.in" in configure.ac, configure, and + Makefile.in to be consistent with changes in libpng-1.4.0rc03 + +Version 1.4.0rc06 [December 29, 2009] + Reverted the gamma_table changes from libpng-1.4.0beta109. + Fixed some indentation errors. + +Version 1.4.0rc07 [January 1, 2010] + Revised libpng*.txt and libpng.3 about 1.2.x->1.4.x differences. + Use png_calloc() instead of png_malloc(); png_memset() in pngrutil.c + Update copyright year to 2010. + +Version 1.4.0rc08 [January 2, 2010] + Avoid deprecated references to png_ptr-io_ptr and png_ptr->error_ptr + in pngtest.c + +Version 1.4.0 [January 3, 2010] + No changes. + +Version 1.4.1beta01 [January 8, 2010] + Updated CMakeLists.txt for consistent indentation and to avoid an + unclosed if-statement warning (Philip Lowman). + Revised Makefile.am and Makefile.in to remove references to Y2KINFO, + KNOWNBUG, and libpng.la (Robert Schwebel). + Revised the makefiles to install the same files and symbolic + links as configure, except for libpng.la and libpng14.la. + Make png_set|get_compression_buffer_size() available even when + PNG_WRITE_SUPPORTED is not enabled. + Revised Makefile.am and Makefile.in to simplify their maintenance. + Revised scripts/makefile.linux to install a link to libpng14.so.14.1 + +Version 1.4.1beta02 [January 9, 2010] + Revised the rest of the makefiles to install a link to libpng14.so.14.1 + +Version 1.4.1beta03 [January 10, 2010] + Removed png_set_premultiply_alpha() from scripts/*.def + +Version 1.4.1rc01 [January 16, 2010] + No changes. + +Version 1.4.1beta04 [January 23, 2010] + Revised png_decompress_chunk() to improve speed and memory usage when + decoding large chunks. + Added png_set|get_chunk_malloc_max() functions. + +Version 1.4.1beta05 [January 26, 2010] + Relocated "int k" declaration in pngtest.c to minimize its scope. + +Version 1.4.1beta06 [January 28, 2010] + Revised png_decompress_chunk() to use a two-pass method suggested by + John Bowler. + +Version 1.4.1beta07 [February 6, 2010] + Folded some long lines in the source files. + Added defineable PNG_USER_CHUNK_CACHE_MAX, PNG_USER_CHUNK_MALLOC_MAX, + and a PNG_USER_LIMITS_SUPPORTED flag. + Eliminated use of png_ptr->irowbytes and reused the slot in png_ptr as + png_ptr->png_user_chunk_malloc_max. + Revised png_push_save_buffer() to do fewer but larger png_malloc() calls. + +Version 1.4.1beta08 [February 6, 2010] + Minor cleanup and updating of dates and copyright year. + +Version 1.5.0beta01 [February 7, 2010] + Moved declaration of png_struct into private pngstruct.h and png_info + into pnginfo.h + +Version 1.4.1beta09 and 1.5.0beta02 [February 7, 2010] + Reverted to original png_push_save_buffer() code. + +Version 1.4.1beta10 and 1.5.0beta03 [February 8, 2010] + Return allocated "old_buffer" in png_push_save_buffer() before + calling png_error(), to avoid a potential memory leak. + Updated configure script to use SO number 15. + +Version 1.5.0beta04 [February 9, 2010] + Removed malformed "incomplete struct declaration" of png_info from png.h + +Version 1.5.0beta05 [February 12, 2010] + Removed PNG_DEPSTRUCT markup in pngstruct.h and pnginfo.h, and undid the + linewrapping that it entailed. + Revised comments in pngstruct.h and pnginfo.h and added pointers to + the libpng license. + Changed PNG_INTERNAL to PNG_EXPOSE_INTERNAL_STRUCTURES + Removed the cbuilder5 project, which has not been updated to 1.4.0. + +Version 1.4.1beta12 and 1.5.0beta06 [February 14, 2010] + Fixed type declaration of png_get_chunk_malloc_max() in pngget.c (Daisuke + Nishikawa) + +Version 1.5.0beta07 [omitted] + +Version 1.5.0beta08 [February 19, 2010] + Changed #ifdef PNG_NO_STDIO_SUPPORTED to #ifdef PNG_NO_CONSOLE_IO_SUPPORTED + wherever png_snprintf() is used to construct error and warning messages. + Noted in scripts/makefile.mingw that it expects to be run under MSYS. + Removed obsolete unused MMX-querying support from contrib/gregbook + Added exported png_longjmp() function. + Removed the AIX redefinition of jmpbuf in png.h + Added -D_ALLSOURCE in configure.ac, makefile.aix, and CMakeLists.txt + when building on AIX. + +Version 1.5.0beta09 [February 19, 2010] + Removed -D_ALLSOURCE from configure.ac, makefile.aix, and CMakeLists.txt. + Changed the name of png_ptr->jmpbuf to png_ptr->png_jmpbuf in pngstruct.h + +Version 1.5.0beta10 [February 25, 2010] + Removed unused gzio.c from contrib/pngminim gather and makefile scripts + Removed replacement error handlers from contrib/gregbook. Because of + the new png_longjmp() function they are no longer needed. + +Version 1.5.0beta11 [March 6, 2010] + Removed checking for already-included setjmp.h from pngconf.h + Fixed inconsistent indentations and made numerous cosmetic changes. + Revised the "SEE ALSO" style of libpng.3, libpngpf.3, and png.5 + +Version 1.5.0beta12 [March 9, 2010] + Moved "#include png.h" inside pngpriv.h and removed "#include png.h" from + the source files, along with "#define PNG_EXPOSE_INTERNAL_STRUCTURES" + and "#define PNG_NO_PEDANTIC_WARNINGS" (John Bowler). + Created new pngdebug.h and moved debug definitions there. + +Version 1.5.0beta13 [March 10, 2010] + Protect pngstruct.h, pnginfo.h, and pngdebug.h from being included twice. + Revise the "#ifdef" blocks in png_inflate() so it will compile when neither + PNG_USER_CHUNK_MALLOC_MAX nor PNG_SET_CHUNK_MALLOC_LIMIT_SUPPORTED + is defined. + Removed unused png_measure_compressed_chunk() from pngpriv.h and libpngpf.3 + Moved the 'config.h' support from pngconf.h to pngpriv.h + Removed PNGAPI from the png_longjmp_ptr typedef. + Eliminated dependence of pngtest.c on the private pngdebug.h file. + Make all png_debug macros into *unterminated* statements or + expressions (i.e. a trailing ';' must always be added) and correct + the format statements in various png_debug messages. + +Version 1.5.0beta14 [March 14, 2010] + Removed direct access to png_ptr->io_ptr from the Windows code in pngtest.c + Revised Makefile.am to account for recent additions and replacements. + Corrected CE and OS/2 DEF files (scripts/png*def) for symbols removed and + added ordinal numbers to the Windows DEF file and corrected the duplicated + ordinal numbers on CE symbols that are commented out. + Added back in export symbols that can be present in the Windows build but + are disabled by default. + PNG_EXPORT changed to include an 'ordinal' field for DEF file generation. + PNG_CALLBACK added to make callback definitions uniform. PNGAPI split + into PNGCAPI (base C form), PNGAPI (exports) and PNGCBAPI (callbacks), + and appropriate changes made to all files. Cygwin builds re-hinged to + allow procedure call standard changes and to remove the need for the DEF + file (fixes build on Cygwin). + Enabled 'attribute' warnings that are relevant to library APIs and callbacks. + Changed rules for generation of the various symbol files and added a new + rule for a DEF file (which is also added to the distribution). + Updated the symbol file generation to stop it adding spurious spaces + to EOL (coming from preprocessor macro expansion). Added a facility + to join tokens in the output and rewrite *.dfn to use this. + Eliminated scripts/*.def in favor of libpng.def; updated projects/visualc71 + and removed scripts/makefile.cygwin. + Made PNG_BUILD_DLL safe: it can be set whenever a DLL is being built. + Removed the include of sys/types.h - apparently unnecessary now on the + platforms on which it happened (all but Mac OS and RISC OS). + Moved the Mac OS test into pngpriv.h (the only place it is used.) + +Version 1.5.0beta15 [March 17, 2010] + Added symbols.chk target to Makefile.am to validate the symbols in png.h + against the new DEF file scripts/symbols.def. + Changed the default DEF file back to pngwin.def. + Removed makefile.mingw. + Eliminated PNG_NO_EXTERN and PNG_ALL_EXTERN + +Version 1.5.0beta16 [April 1, 2010] + Make png_text_struct independent of PNG_iTXt_SUPPORTED, so that + fields are initialized in all configurations. The READ/WRITE + macros (PNG_(READ|WRITE)_iTXt_SUPPORTED) still function as + before to disable code to actually read or write iTXt chunks + and iTXt_SUPPORTED can be used to detect presence of either + read or write support (but it is probably better to check for + the one actually required - read or write.) + Combined multiple png_warning() calls for a single error. + Restored the macro definition of png_check_sig(). + +Version 1.5.0beta17 [April 17, 2010] + Added some "(long)" typecasts to printf calls in png_handle_cHRM(). + Documented the fact that png_set_dither() was disabled since libpng-1.4.0. + Reenabled png_set_dither() but renamed it to png_set_quantize() to reflect + more accurately what it actually does. At the same time, renamed + the PNG_DITHER_[RED,GREEN_BLUE]_BITS macros to + PNG_QUANTIZE_[RED,GREEN,BLUE]_BITS. + Added some "(long)" typecasts to printf calls in png_handle_cHRM(). + Freeze build-time only configuration in the build. + In all prior versions of libpng most configuration options + controlled by compiler #defines had to be repeated by the + application code that used libpng. This patch changes this + so that compilation options that can only be changed at build + time are frozen in the build. Options that are compiler + dependent (and those that are system dependent) are evaluated + each time - pngconf.h holds these. Options that can be changed + per-file in the application are in png.h. Frozen options are + in the new installed header file pnglibconf.h (John Bowler) + Removed the xcode project because it has not been updated to work + with libpng-1.5.0. + Removed the ability to include optional pngusr.h + +Version 1.5.0beta18 [April 17, 2010] + Restored the ability to include optional pngusr.h + Moved replacements for png_error() and png_warning() from the + contrib/pngminim project to pngerror.c, for use when warnings or + errors are disabled via PNG_NO_WARN or PNG_NO_ERROR_TEXT, to avoid + storing unneeded error/warning text. + Updated contrib/pngminim project to work with the new pnglibconf.h + Added some PNG_NO_* defines to contrib/pngminim/*/pngusr.h to save space. + +Version 1.5.0beta19 [April 24, 2010] + Added PNG_{READ,WRITE}_INT_FUNCTIONS_SUPPORTED. This allows the functions + to read and write ints to be disabled independently of PNG_USE_READ_MACROS, + which allows libpng to be built with the functions even though the default + is to use the macros - this allows applications to choose at app build + time whether or not to use macros (previously impossible because the + functions weren't in the default build.) + Changed Windows calling convention back to __cdecl for API functions. + For Windows/x86 platforms only: + __stdcall is no longer needed for Visual Basic, so libpng-1.5.0 uses + __cdecl throughout (both API functions and callbacks) on Windows/x86 + platforms. + Replaced visualc6 and visualc71 projects with new vstudio project + Relaxed the overly-restrictive permissions of some files. + +Version 1.5.0beta20 [April 24, 2010] + Relaxed more overly-restrictive permissions of some files. + +Version 1.5.0beta21 [April 27, 2010] + Removed some unwanted binary bytes and changed CRLF to NEWLINE in the new + vstudio project files, and some trivial editing of some files in the + scripts directory. + Set PNG_NO_READ_BGR, PNG_NO_IO_STATE, and PNG_NO_TIME_RFC1123 in + contrib/pngminim/decoder/pngusr.h to make a smaller decoder application. + +Version 1.5.0beta22 [April 28, 2010] + Fixed dependencies of GET_INT_32 - it does not require READ_INT_FUNCTIONS + because it has a macro equivalent. + Improved the options.awk script; added an "everything off" option. + Revised contrib/pngminim to use the "everything off" option in pngusr.dfa. + +Version 1.5.0beta23 [April 29, 2010] + Corrected PNG_REMOVED macro to take five arguments. + The macro was documented with two arguments (name,ordinal), however + the symbol checking .dfn files assumed five arguments. The five + argument form seems more useful so it is changed to that. + Corrected PNG_UNKNOWN_CHUNKS_SUPPORTED to PNG_HANDLE_AS_UNKNOWN_SUPPORTED + in gregbook/readpng2.c + Corrected protection of png_get_user_transform_ptr. The API declaration in + png.h is removed if both READ and WRITE USER_TRANSFORM are turned off + but was left defined in pngtrans.c + Added logunsupported=1 to cause pnglibconf.h to document disabled options. + This makes the installed pnglibconf.h more readable but causes no + other change. The intention is that users of libpng will find it + easier to understand if an API they need is missing. + Include png_reset_zstream() in png.c only when PNG_READ_SUPPORTED is defined. + Removed dummy_inflate.c from contrib/pngminim/encoder + Removed contrib/pngminim/*/gather.sh; gathering is now done in the makefile. + +Version 1.5.0beta24 [May 7, 2010] + Use bitwise "&" instead of arithmetic mod in pngrutil.c calculation of the + offset of the png_ptr->rowbuf pointer into png_ptr->big_row_buf. + Added more blank lines for readability. + +Version 1.5.0beta25 [June 18, 2010] + In pngpread.c: png_push_have_row() add check for new_row > height + Removed the now-redundant check for out-of-bounds new_row from example.c + +Version 1.5.0beta26 [June 18, 2010] + In pngpread.c: png_push_process_row() add check for too many rows. + +Version 1.5.0beta27 [June 18, 2010] + Removed the check added in beta25 as it is now redundant. + +Version 1.5.0beta28 [June 20, 2010] + Rewrote png_process_IDAT_data to consistently treat extra data as warnings + and handle end conditions more cleanly. + Removed the new (beta26) check in png_push_process_row(). + +Version 1.5.0beta29 [June 21, 2010] + Revised scripts/options.awk to work on Sunos (but still doesn't work) + Added comment to options.awk and contrib/pngminim/*/makefile to try nawk. + +Version 1.5.0beta30 [June 22, 2010] + Stop memory leak when reading a malformed sCAL chunk. + +Version 1.5.0beta31 [June 26, 2010] + Revised pngpread.c patch of beta28 to avoid an endless loop. + Removed some trailing blanks. + +Version 1.5.0beta32 [June 26, 2010] + Removed leftover scripts/options.patch and scripts/options.rej + +Version 1.5.0beta33 [July 6, 3010] + Made FIXED and FLOATING options consistent in the APIs they enable and + disable. Corrected scripts/options.awk to handle both command line + options and options specified in the .dfa files. + Changed char *msg to PNG_CONST char *msg in pngrutil.c + Make png_set_sRGB_gAMA_and_cHRM set values using either the fixed or + floating point APIs, but not both. + Reversed patch to remove error handler when the jmp_buf is stored in the + main program structure, not the png_struct. + The error handler is needed because the default handler in libpng will + always use the jmp_buf in the library control structure; this is never + set. The gregbook code is a useful example because, even though it + uses setjmp/longjmp, it shows how error handling can be implemented + using control mechanisms not directly supported by libpng. The + technique will work correctly with mechanisms such as Microsoft + Structure Exceptions or C++ exceptions (compiler willing - note that gcc + does not by default support interworking of C and C++ error handling.) + Reverted changes to call png_longjmp in contrib/gregbook where it is not + appropriate. If mainprog->jmpbuf is used by setjmp, then png_longjmp + cannot be used. + Changed "extern PNG_EXPORT" to "PNG_EXPORT" in png.h (Jan Nijtmans) + Changed "extern" to "PNG_EXTERN" in pngpriv.h (except for the 'extern "C" {') + +Version 1.5.0beta34 [July 12, 2010] + Put #ifndef PNG_EXTERN, #endif around the define PNG_EXTERN in pngpriv.h + +Version 1.5.0beta35 [July 24, 2010] + Removed some newly-added TAB characters. + Added -DNO_PNG_SNPRINTF to CFLAGS in scripts/makefile.dj2 + Moved the definition of png_snprintf() outside of the enclosing + #ifdef blocks in pngconf.h + +Version 1.5.0beta36 [July 29, 2010] + Patches by John Bowler: + Fixed point APIs are now supported throughout (no missing APIs). + Internal fixed point arithmetic support exists for all internal floating + point operations. + sCAL validates the floating point strings it is passed. + Safe, albeit rudimentary, Watcom support is provided by PNG_API_RULE==2 + Two new APIs exist to get the number of passes without turning on the + PNG_INTERLACE transform and to get the number of rows in the current + pass. + A new test program, pngvalid.c, validates the gamma code. + Errors in the 16-bit gamma correction (overflows) have been corrected. + cHRM chunk testing is done consistently (previously the floating point + API bypassed it, because the test really didn't work on FP, now the test + is performed on the actual values to be stored in the PNG file so it + works in the FP case too.) + Most floating point APIs now simply call the fixed point APIs after + converting the values to the fixed point form used in the PNG file. + The standard headers no longer include zlib.h, which is currently only + required for pngstruct.h and can therefore be internal. + Revised png_get_int_32 to undo the PNG two's complement representation of + negative numbers. + +Version 1.5.0beta37 [July 30, 2010] + Added a typecast in png_get_int_32() in png.h and pngrutil.h to avoid + a compiler warning. + Replaced oFFs 0,0 with oFFs -10,20 in pngtest.png + +Version 1.5.0beta38 [July 31, 2010] + Implemented remaining "_fixed" functions. + Corrected a number of recently introduced warnings mostly resulting from + safe but uncast assignments to shorter integers. Also added a zlib + VStudio release library project because the latest zlib Official Windows + build does not include such a thing. + Revised png_get_int_16() to be similar to png_get_int_32(). + Restored projects/visualc71. + +Version 1.5.0beta39 [August 2, 2010] + VisualC/GCC warning fixes, VisualC build fixes + The changes include support for function attributes in VC in addition to + those already present in GCC - necessary because without these some + warnings are unavoidable. Fixes include signed/unsigned fixes in + pngvalid and checks with gcc -Wall -Wextra -Wunused. + VC requires function attributes on function definitions as well as + declarations, PNG_FUNCTION has been added to enable this and the + relevant function definitions changed. + +Version 1.5.0beta40 [August 6, 2010] + Correct use of _WINDOWS_ in pngconf.h + Removed png_mem_ #defines; they are no longer used. + Added the sRGB chunk to pngtest.png + +Version 1.5.0beta41 [August 11, 2010] + Added the cHRM chunk to pngtest.png + Don't try to use version-script with cygwin/mingw. + Revised contrib/gregbook to work under cygwin/mingw. + +Version 1.5.0beta42 [August 18, 2010] + Add .dll.a to the list of extensions to be symlinked by Makefile.am (Yaakov) + Made all API functions that have const arguments and constant string + literal pointers declare them (John Bowler). + +Version 1.5.0beta43 [August 20, 2010] + Removed spurious tabs, shorten long lines (no source change) + Also added scripts/chkfmt to validate the format of all the files that can + reasonably be validated (it is suggested to run "make distclean" before + checking, because some machine generated files have long lines.) + Reformatted the CHANGES file to be more consistent throughout. + Made changes to address various issues identified by GCC, mostly + signed/unsigned and shortening problems on assignment but also a few + difficult to optimize (for GCC) loops. + Fixed non-GCC fixed point builds. In png.c a declaration was misplaced + in an earlier update. Fixed to declare the auto variables at the head. + Use cexcept.h in pngvalid.c. + +Version 1.5.0beta44 [August 24, 2010] + Updated CMakeLists.txt to use CMAKE_INSTALL_LIBDIR variable; useful for + installing libpng in /usr/lib64 (Funda Wang). + Revised CMakeLists.txt to put the man pages in share/man/man* not man/man* + Revised CMakeLists.txt to make symlinks instead of copies when installing. + Changed PNG_LIB_NAME from pngNN to libpngNN in CMakeLists.txt (Philip Lowman) + Implemented memory checks within pngvalid + Reformatted/rearranged pngvalid.c to assist use of progressive reader. + Check interlaced images in pngvalid + Clarified pngusr.h comments in pnglibconf.dfa + Simplified the pngvalid error-handling code now that cexcept.h is in place. + Implemented progressive reader in pngvalid.c for standard tests + Implemented progressive read in pngvalid.c gamma tests + Turn on progressive reader in pngvalid.c by default and tidy code. + +Version 1.5.0beta45 [August 26, 2010] + Added an explicit make step to projects/vstudio for pnglibconf.h + Also corrected zlib.vcxproj into which Visual Studio had introduced + what it calls an "authoring error". The change to make pnglibconf.h + simply copies the file; in the future it may actually generate the + file from scripts/pnglibconf.dfa as the other build systems do. + Changed pngvalid to work when floating point APIs are disabled + Renamed the prebuilt scripts/pnglibconf.h to scripts/pnglibconf.h.prebuilt + Supply default values for PNG_USER_PRIVATEBUILD and PNG_USER_DLLFNAME_POSTFIX + in pngpriv.h in case the user neglected to define them in their pngusr.h + +Version 1.5.0beta46 [August 28, 2010] + Added new private header files to libpng_sources in CMakeLists.txt + Added PNG_READ_16BIT, PNG_WRITE_16BIT, and PNG_16BIT options. + Added reference to scripts/pnglibconf.h.prebuilt in the visualc71 project. + +Version 1.5.0beta47 [September 11, 2010] + Fixed a number of problems with 64-bit compilation reported by Visual + Studio 2010 (John Bowler). + +Version 1.5.0beta48 [October 4, 2010] + Updated CMakeLists.txt (Philip Lowman). + Revised autogen.sh to recognize and use $AUTOCONF, $AUTOMAKE, $AUTOHEADER, + $AUTOPOINT, $ACLOCAL and $LIBTOOLIZE + Fixed problem with symbols creation in Makefile.am which was assuming that + all versions of ccp write to standard output by default (Martin Banky). The + bug was introduced in libpng-1.2.9beta5. + Removed unused mkinstalldirs. + +Version 1.5.0beta49 [October 8, 2010] + Undid Makefile.am revision of 1.5.0beta48. + +Version 1.5.0beta50 [October 14, 2010] + Revised Makefile.in to account for mkinstalldirs being removed. + Added some "(unsigned long)" typecasts in printf statements in pngvalid.c. + Suppressed a compiler warning in png_handle_sPLT(). + Check for out-of-range text compression mode in png_set_text(). + +Version 1.5.0beta51 [October 15, 2010] + Changed embedded dates to "(PENDING RELEASE) in beta releases (and future + rc releases) to minimize the difference between releases. + +Version 1.5.0beta52 [October 16, 2010] + Restored some of the embedded dates (in png.h, png.c, documentation, etc.) + +Version 1.5.0beta53 [October 18, 2010] + Updated INSTALL to mention using "make maintainer-clean" and to remove + obsolete statement about a custom ltmain.sh + Disabled "color-tests" by default in Makefile.am so it will work with + automake versions earlier than 1.11.1 + Use document name "libpng-manual.txt" instead of "libpng-.txt" + to simplify version differences. + Removed obsolete remarks about setjmp handling from INSTALL. + Revised and renamed the typedef in png.h and png.c that was designed + to catch library and header mismatch. + +Version 1.5.0beta54 [November 10, 2010] + Require 48 bytes, not 64 bytes, for big_row_buf in overflow checks. + Used a consistent structure for the pngget.c functions. + +Version 1.5.0beta55 [November 21, 2010] + Revised png_get_uint_32, png_get_int_32, png_get_uint_16 (Cosmin) + Moved reading of file signature into png_read_sig (Cosmin) + Fixed atomicity of chunk header serialization (Cosmin) + Added test for io_state in pngtest.c (Cosmin) + Added "#!/bin/sh" at the top of contrib/pngminim/*/gather.sh scripts. + Changes to remove gcc warnings (John Bowler) + Certain optional gcc warning flags resulted in warnings in libpng code. + With these changes only -Wconversion and -Wcast-qual cannot be turned on. + Changes are trivial rearrangements of code. -Wconversion is not possible + for pngrutil.c (because of the widespread use of += et al on variables + smaller than (int) or (unsigned int)) and -Wcast-qual is not possible + with pngwio.c and pngwutil.c because the 'write' callback and zlib + compression both fail to declare their input buffers with 'const'. + +Version 1.5.0beta56 [December 7, 2010] + Added the private PNG_UNUSED() macro definition in pngpriv.h. + Added some commentary about PNG_EXPORT in png.h and pngconf.h + Revised PNG_EXPORT() macro and added PNG_EXPORTA() macro, with the + objective of simplifying and improving the cosmetic appearance of png.h. + Fixed some incorrect "=" macro names in pnglibconf.dfa + Included documentation of changes in 1.5.0 from 1.4.x in libpng-manual.txt + +Version 1.5.0beta57 [December 9, 2010] + Documented the pngvalid gamma error summary with additional comments and + print statements. + Improved missing symbol handling in checksym.awk; symbols missing in both + the old and new files can now be optionally ignored, treated as errors + or warnings. + Removed references to pngvcrd.c and pnggccrd.c from the vstudio project. + Updated "libpng14" to "libpng15" in the visualc71 project. + Enabled the strip16 tests in pngvalid.` + Don't display test results (except PASS/FAIL) when running "make test". + Instead put them in pngtest-log.txt + Added "--with-zprefix=" to configure.ac + Updated the prebuilt configuration files to autoconf version 2.68 + +Version 1.5.0beta58 [December 19, 2010] + Fixed interlace image handling and add test cases (John Bowler) + Fixed the clean rule in Makefile.am to remove pngtest-log.txt + Made minor changes to work around warnings in gcc 3.4 + +Version 1.5.0rc01 [December 27, 2010] + No changes. + +Version 1.5.0rc02 [December 27, 2010] + Eliminated references to the scripts/*.def files in project/visualc71. + +Version 1.5.0rc03 [December 28, 2010] + Eliminated scripts/*.def and revised Makefile.am accordingly + +Version 1.5.0rc04 [December 29, 2010] + Fixed bug in background transformation handling in pngrtran.c (it was + looking for the flag in png_ptr->transformations instead of in + png_ptr->flags) (David Raymond). + +Version 1.5.0rc05 [December 31, 2010] + Fixed typo in a comment in CMakeLists.txt (libpng14 => libpng15) (Cosmin) + +Version 1.5.0rc06 [January 4, 2011] + Changed the new configure option "zprefix=string" to "zlib-prefix=string" + +Version 1.5.0rc07 [January 4, 2011] + Updated copyright year. + +Version 1.5.0 [January 6, 2011] + No changes. + +version 1.5.1beta01 [January 8, 2011] + Added description of png_set_crc_action() to the manual. + Added a note in the manual that the type of the iCCP profile was changed + from png_charpp to png_bytepp in png_get_iCCP(). This change happened + in version 1.5.0beta36 but is not noted in the CHANGES. Similarly, + it was changed from png_charpp to png_const_bytepp in png_set_iCCP(). + Ensure that png_rgb_to_gray ignores palette mapped images, if libpng + internally happens to call it with one, and fixed a failure to handle + palette mapped images correctly. This fixes CVE-2690. + +Version 1.5.1beta02 [January 14, 2011] + Fixed a bug in handling of interlaced images (bero at arklinux.org). + Updated CMakeLists.txt (Clifford Yapp) + +Version 1.5.1beta03 [January 14, 2011] + Fixed typecasting of some png_debug() statements (Cosmin) + +Version 1.5.1beta04 [January 16, 2011] + Updated documentation of png_set|get_tRNS() (Thomas Klausner). + Mentioned in the documentation that applications must #include "zlib.h" + if they need access to anything in zlib.h, and that a number of + macros such as png_memset() are no longer accessible by applications. + Corrected pngvalid gamma test "sample" function to access all of the color + samples of each pixel, instead of sampling the red channel three times. + Prefixed variable names index, div, exp, gamma with "png_" to avoid "shadow" + warnings, and (mistakenly) changed png_exp() to exp(). + +Version 1.5.1beta05 [January 16, 2011] + Changed variable names png_index, png_div, png_exp, and png_gamma to + char_index, divisor, exp_b10, and gamma_val, respectively, and + changed exp() back to png_exp(). + +Version 1.5.1beta06 [January 20, 2011] + Prevent png_push_crc_skip() from hanging while reading an unknown chunk + or an over-large compressed zTXt chunk with the progressive reader. + Eliminated more GCC "shadow" warnings. + Revised png_fixed() in png.c to avoid compiler warning about reaching the + end without returning anything. + +Version 1.5.1beta07 [January 22, 2011] + In the manual, describe the png_get_IHDR() arguments in the correct order. + Added const_png_structp and const_png_infop types, and used them in + prototypes for most png_get_*() functions. + +Version 1.5.1beta08 [January 23, 2011] + Added png_get_io_chunk_type() and deprecated png_get_io_chunk_name() + Added synopses for the IO_STATE functions and other missing synopses + to the manual. Removed the synopses from libpngpf.3 because they + were out of date and no longer useful. Better information can be + obtained by reading the prototypes and comments in pngpriv.h + Attempted to fix cpp on Solaris with S. Studio 12 cc, fix build + Added a make macro DFNCPP that is a CPP that will accept the tokens in + a .dfn file and adds configure stuff to test for such a CPP. ./configure + should fail if one is not available. + Corrected const_png_ in png.h to png_const_ to avoid polluting the namespace. + Added png_get_current_row_number and png_get_current_pass_number for the + benefit of the user transform callback. + Added png_process_data_pause and png_process_data_skip for the benefit of + progressive readers that need to stop data processing or want to optimize + skipping of unread data (e.g., if the reader marks a chunk to be skipped.) + +Version 1.5.1beta09 [January 24, 2011] + Enhanced pngvalid, corrected an error in gray_to_rgb, corrected doc error. + pngvalid contains tests of transforms, which tests are currently disabled + because they are incompletely tested. gray_to_rgb was failing to expand + the bit depth for smaller bit depth images; this seems to be a long + standing error and resulted, apparently, in invalid output + (CVE-2011-0408, CERT VU#643140). The documentation did not accurately + describe what libpng really does when converting RGB to gray. + +Version 1.5.1beta10 [January 27, 2010] + Fixed incorrect examples of callback prototypes in the manual, that were + introduced in libpng-1.0.0. + In addition the order of the png_get_uint macros with respect to the + relevant function definitions has been reversed. This helps the + preprocessing of the symbol files be more robust. Furthermore, the + symbol file preprocessing now uses -DPNG_NO_USE_READ_MACROS even when + the library may actually be built with PNG_USE_READ_MACROS; this stops + the read macros interfering with the symbol file format. + Made the manual, synopses, and function prototypes use the function + argument names file_gamma, int_file_gamma, and srgb_intent consistently. + +Version 1.5.1beta11 [January 28, 2011] + Changed PNG_UNUSED from "param=param;" to "{if(param){}}". + Corrected local variable type in new API png_process_data_skip() + The type was self-evidently incorrect but only causes problems on 64-bit + architectures. + Added transform tests to pngvalid and simplified the arguments. + +Version 1.5.1rc01 [January 29, 2011] + No changes. + +Version 1.5.1rc02 [January 31, 2011] + Added a request in the manual that applications do not use "png_" or + "PNG_" to begin any of their own symbols. + Changed PNG_UNUSED to "(void)param;" and updated the commentary in pngpriv.h + +Version 1.5.1 [February 3, 2011] + No changes. + +Version 1.5.2beta01 [February 13, 2011] + More -Wshadow fixes for older gcc compilers. Older gcc versions apparently + check formal parameters names in function declarations (as well as + definitions) to see if they match a name in the global namespace. + Revised PNG_EXPORTA macro to not use an empty parameter, to accommodate the + old VisualC++ preprocessor. + Turned on interlace handling in png_read_png(). + Fixed gcc pendantic warnings. + Handle longjmp in Cygwin. + Fixed png_get_current_row_number() in the interlaced case. + Cleaned up ALPHA flags and transformations. + Implemented expansion to 16 bits. + +Version 1.5.2beta02 [February 19, 2011] + Fixed mistake in the descriptions of user read_transform and write_transform + function prototypes in the manual. The row_info struct is png_row_infop. + Reverted png_get_current_row_number() to previous (1.5.2beta01) behavior. + Corrected png_get_current_row_number documentation + Fixed the read/write row callback documentation. + This documents the current behavior, where the callback is called after + every row with information pertaining to the next row. + +Version 1.5.2beta03 [March 3, 2011] + Fixed scripts/makefile.vcwin32 + Updated contrib/pngsuite/README to add the word "modify". + Define PNG_ALLOCATED to blank when _MSC_VER<1300. + +Version 1.5.2rc01 [March 19, 2011] + Define remaining attributes to blank when MSC_VER<1300. + ifdef out mask arrays in pngread.c when interlacing is not supported. + +Version 1.5.2rc02 [March 22, 2011] + Added a hint to try CPP=/bin/cpp if "cpp -E" fails in scripts/pnglibconf.mak + and in contrib/pngminim/*/makefile, eg., on SunOS 5.10, and removed "strip" + from the makefiles. + Fixed a bug (present since libpng-1.0.7) that makes png_handle_sPLT() fail + to compile when PNG_NO_POINTER_INDEXING is defined (Chubanov Kirill) + +Version 1.5.2rc03 [March 24, 2011] + Don't include standard header files in png.h while building the symbol table, + to avoid cpp failure on SunOS (introduced PNG_BUILDING_SYMBOL_TABLE macro). + +Version 1.5.2 [March 31, 2011] + No changes. + +Version 1.5.3beta01 [April 1, 2011] + Re-initialize the zlib compressor before compressing non-IDAT chunks. + Added API functions (png_set_text_compression_level() and four others) to + set parameters for zlib compression of non-IDAT chunks. + +Version 1.5.3beta02 [April 3, 2011] + Updated scripts/symbols.def with new API functions. + Only compile the new zlib re-initializing code when text or iCCP is + supported, using PNG_WRITE_COMPRESSED_TEXT_SUPPORTED macro. + Improved the optimization of the zlib CMF byte (see libpng-1.2.6beta03). + Optimize the zlib CMF byte in non-IDAT compressed chunks + +Version 1.5.3beta03 [April 16, 2011] + Fixed gcc -ansi -pedantic compile. A strict ANSI system does not have + snprintf, and the "__STRICT_ANSI__" detects that condition more reliably + than __STDC__ (John Bowler). + Removed the PNG_PTR_NORETURN attribute because it too dangerous. It tells + the compiler that a user supplied callback (the error handler) does not + return, yet there is no guarantee in practice that the application code + will correctly implement the error handler because the compiler only + issues a warning if there is a mistake (John Bowler). + Removed the no-longer-used PNG_DEPSTRUCT macro. + Updated the zlib version to 1.2.5 in the VStudio project. + Fixed 64-bit builds where png_uint_32 is smaller than png_size_t in + pngwutil.c (John Bowler). + Fixed bug with stripping the filler or alpha channel when writing, that + was introduced in libpng-1.5.2beta01 (bug report by Andrew Church). + +Version 1.5.3beta04 [April 27, 2011] + Updated pngtest.png with the new zlib CMF optimization. + Cleaned up conditional compilation code and of background/gamma handling + Internal changes only except a new option to avoid compiling the + png_build_grayscale_palette API (which is not used at all internally.) + The main change is to move the transform tests (READ_TRANSFORMS, + WRITE_TRANSFORMS) up one level to the caller of the APIs. This avoids + calls to spurious functions if all transforms are disabled and slightly + simplifies those functions. Pngvalid modified to handle this. + A minor change is to stop the strip_16 and expand_16 interfaces from + disabling each other; this allows the future alpha premultiplication + code to use 16-bit intermediate values while still producing 8-bit output. + png_do_background and png_do_gamma have been simplified to take a single + pointer to the png_struct rather than pointers to every item required + from the png_struct. This makes no practical difference to the internal + code. + A serious bug in the pngvalid internal routine 'standard_display_init' has + been fixed - this failed to initialize the red channel and accidentally + initialized the alpha channel twice. + Changed png_struct jmp_buf member name from png_jmpbuf to tmp_jmpbuf to + avoid a possible clash with the png_jmpbuf macro on some platforms. + +Version 1.5.3beta05 [May 6, 2011] + Added the "_POSIX_SOURCE" feature test macro to ensure libpng sees the + correct API. _POSIX_SOURCE is defined in pngpriv.h, pngtest.c and + pngvalid.c to ensure that POSIX conformant systems disable non-POSIX APIs. + Removed png_snprintf and added formatted warning messages. This change adds + internal APIs to allow png_warning messages to have parameters without + requiring the host OS to implement snprintf. As a side effect the + dependency of the tIME-supporting RFC1132 code on stdio is removed and + PNG_NO_WARNINGS does actually work now. + Pass "" instead of '\0' to png_default_error() in png_err(). This mistake + was introduced in libpng-1.2.20beta01. This fixes CVE-2011-2691. + Added PNG_WRITE_OPTIMIZE_CMF_SUPPORTED macro to make the zlib "CMF" byte + optimization configureable. + IDAT compression failed if preceded by a compressed text chunk (bug + introduced in libpng-1.5.3beta01-02). This was because the attempt to + reset the zlib stream in png_write_IDAT happened after the first IDAT + chunk had been deflated - much too late. In this change internal + functions were added to claim/release the z_stream and, hopefully, make + the code more robust. Also deflateEnd checking is added - previously + libpng would ignore an error at the end of the stream. + +Version 1.5.3beta06 [May 8, 2011] + Removed the -D_ALL_SOURCE from definitions for AIX in CMakeLists.txt + Implemented premultiplied alpha support: png_set_alpha_mode API + +Version 1.5.3beta07 [May 11, 2011] + Added expand_16 support to the high level interface. + Added named value and 'flag' gamma support to png_set_gamma. Made a minor + change from the previous (unreleased) ABI/API to hide the exact value used + for Macs - it's not a good idea to embed this in the ABI! + Moved macro definitions for PNG_HAVE_IHDR, PNG_HAVE_PLTE, and PNG_AFTER_IDAT + from pngpriv.h to png.h because they must be visible to applications + that call png_set_unknown_chunks(). + Check for up->location !PNG_AFTER_IDAT when writing unknown chunks + before IDAT. + +Version 1.5.3beta08 [May 16, 2011] + Improved "pngvalid --speed" to exclude more of pngvalid from the time. + Documented png_set_alpha_mode(), other changes in libpng.3/libpng-manual.txt + The cHRM chunk now sets the defaults for png_set_rgb_to_gray() (when negative + parameters are supplied by the caller), while in the absence of cHRM + sRGB/Rec 709 values are still used. This introduced a divide-by-zero + bug in png_handle_cHRM(). + The bKGD chunk no longer overwrites the background value set by + png_set_background(), allowing the latter to be used before the file + header is read. It never performed any useful function to override + the default anyway. + Added memory overwrite and palette image checks to pngvalid.c + Previously palette image code was poorly checked. Since the transformation + code has a special palette path in most cases this was a severe weakness. + Minor cleanup and some extra checking in pngrutil.c and pngrtran.c. When + expanding an indexed image, always expand to RGBA if transparency is + present. + +Version 1.5.3beta09 [May 17, 2011] + Reversed earlier 1.5.3 change of transformation order; move png_expand_16 + back where it was. The change doesn't work because it requires 16-bit + gamma tables when the code only generates 8-bit ones. This fails + silently; the libpng code just doesn't do any gamma correction. Moving + the tests back leaves the old, inaccurate, 8-bit gamma calculations, but + these are clearly better than none! + +Version 1.5.3beta10 [May 20, 2011] + + png_set_background() and png_expand_16() did not work together correctly. + This problem is present in 1.5.2; if png_set_background is called with + need_expand false and the matching 16 bit color libpng erroneously just + treats it as an 8-bit color because of where png_do_expand_16 is in the + transform list. This simple fix reduces the supplied colour to 8-bits, + so it gets smashed, but this is better than the current behavior. + Added tests for expand16, more fixes for palette image tests to pngvalid. + Corrects the code for palette image tests and disables attempts to + validate palette colors. + +Version 1.5.3rc01 [June 3, 2011] + No changes. + +Version 1.5.3rc02 [June 8, 2011] + Fixed uninitialized memory read in png_format_buffer() (Bug report by + Frank Busse, CVE-2011-2501, related to CVE-2004-0421). + +Version 1.5.3beta11 [June 11, 2011] + Fixed png_handle_sCAL which is broken in 1.5. This fixes CVE 2011-2692. + Added sCAL to pngtest.png + Revised documentation about png_set_user_limits() to say that it also affects + png writing. + Revised handling of png_set_user_limits() so that it can increase the + limit beyond the PNG_USER_WIDTH|HEIGHT_MAX; previously it could only + reduce it. + Make the 16-to-8 scaling accurate. Dividing by 256 with no rounding is + wrong (high by one) 25% of the time. Dividing by 257 with rounding is + wrong in 128 out of 65536 cases. Getting the right answer all the time + without division is easy. + Added "_SUPPORTED" to the PNG_WRITE_CUSTOMIZE_ZTXT_COMPRESSION macro. + Added projects/owatcom, an IDE project for OpenWatcom to replace + scripts/makefile.watcom. This project works with OpenWatcom 1.9. The + IDE autogenerates appropriate makefiles (libpng.mk) for batch processing. + The project is configurable, unlike the Visual Studio project, so long + as the developer has an awk. + Changed png_set_gAMA to limit the gamma value range so that the inverse + of the stored value cannot overflow the fixed point representation, + and changed other things OpenWatcom warns about. + Revised pngvalid.c to test PNG_ALPHA_MODE_SUPPORTED correctly. This allows + pngvalid to build when ALPHA_MODE is not supported, which is required if + it is to build on libpng 1.4. + Removed string/memory macros that are no longer used and are not + necessarily fully supportable, particularly png_strncpy and png_snprintf. + Added log option to pngvalid.c and attempted to improve gamma messages. + +Version 1.5.3 [omitted] + People found the presence of a beta release following an rc release + to be confusing; therefore we bump the version to libpng-1.5.4beta01 + and there will be no libpng-1.5.3 release. + +Version 1.5.4beta01 [June 14, 2011] + Made it possible to undefine PNG_READ_16_TO_8_ACCURATE_SCALE_SUPPORTED + to get the same (inaccurate) output as libpng-1.5.2 and earlier. + Moved definitions of PNG_HAVE_IHDR, PNG_AFTER_IDAT, and PNG_HAVE_PLTE + outside of an unknown-chunk block in png.h because they are also + needed for other uses. + +Version 1.5.4beta02 [June 14, 2011] + Fixed and clarified LEGACY 16-to-8 scaling code. + Added png_set_chop_16() API, to match inaccurate results from previous + libpng versions. + Removed the ACCURATE and LEGACY options (they are no longer useable) + Use the old scaling method for background if png_set_chop_16() was + called. + Made png_set_chop_16() API removeable by disabling PNG_CHOP_16_TO_8_SUPPORTED + +Version 1.5.4beta03 [June 15, 2011] + Fixed a problem in png_do_expand_palette() exposed by optimization in + 1.5.3beta06 + Also removed a spurious and confusing "trans" member ("trans") from png_info. + The palette expand optimization prevented expansion to an intermediate RGBA + form if tRNS was present but alpha was marked to be stripped; this exposed + a check for tRNS in png_do_expand_palette() which is inconsistent with the + code elsewhere in libpng. + Correction to the expand_16 code; removed extra instance of + png_set_scale_16_to_8 from pngpriv.h + +Version 1.5.4beta04 [June 16, 2011] + Added a missing "#ifdef PNG_READ_BACKGROUND_SUPPORTED/#endif" in pngrtran.c + Added PNG_TRANSFORM_CHOP_16 to the high-level read transforms. + Made PNG_READ_16_TO_8_ACCURATE_SCALE configurable again. If this is + not enabled, png_set_strip_16() and png_do_scale_16_to_8() aren't built. + Revised contrib/visupng, gregbook, and pngminim to demonstrate chop_16_to_8 + +Version 1.5.4beta05 [June 16, 2011] + Renamed png_set_strip_16() to png_set_scale_16() and renamed + png_set_chop_16() to png_set_strip(16) in an attempt to minimize the + behavior changes between libpng14 and libpng15. + +Version 1.5.4beta06 [June 18, 2011] + Fixed new bug that was causing both strip_16 and scale_16 to be applied. + +Version 1.5.4beta07 [June 19, 2011] + Fixed pngvalid, simplified macros, added checking for 0 in sCAL. + The ACCURATE scale macro is no longer defined in 1.5 - call the + png_scale_16_to_8 API. Made sure that PNG_READ_16_TO_8 is still defined + if the png_strip_16_to_8 API is present. png_check_fp_number now + maintains some state so that positive, negative and zero values are + identified. sCAL uses these to be strictly spec conformant. + +Version 1.5.4beta08 [June 23, 2011] + Fixed pngvalid if ACCURATE_SCALE is defined. + Updated scripts/pnglibconf.h.prebuilt. + +Version 1.5.4rc01 [June 30, 2011] + Define PNG_ALLOCATED to "restrict" only if MSC_VER >= 1400. + +Version 1.5.4 [July 7, 2011] + No changes. + +Version 1.5.5beta01 [July 13, 2011] + Fixed some typos and made other minor changes in the manual. + Updated contrib/pngminus/makefile.std (Samuli Souminen) + +Version 1.5.5beta02 [July 14, 2011] + Revised Makefile.am and Makefile.in to look in the right directory for + pnglibconf.h.prebuilt + +Version 1.5.5beta03 [July 27, 2011] + Enabled compilation with g++ compiler. This compiler does not recognize + the file extension, so it always compiles with C++ rules. Made minor + changes to pngrutil.c to cast results where C++ expects it but C does not. + Minor editing of libpng.3 and libpng-manual.txt. + +Version 1.5.5beta04 [July 29, 2011] + Revised CMakeLists.txt (Clifford Yapp) + Updated commentary about the png_rgb_to_gray() default coefficients + in the manual and in pngrtran.c + +Version 1.5.5beta05 [August 17, 2011] + Prevent unexpected API exports from non-libpng DLLs on Windows. The "_DLL" + is removed from the test of whether a DLL is being built (this erroneously + caused the libpng APIs to be marked as DLL exports in static builds under + Microsoft Visual Studio). Almost all of the libpng building configuration + is moved from pngconf.h to pngpriv.h, but PNG_DLL_EXPORT remains in + pngconf.h, though, so that it is colocated with the import definition (it + is no longer used anywhere in the installed headers). The VStudio project + definitions have been cleaned up: "_USRDLL" has been removed from the + static library builds (this was incorrect), and PNG_USE_DLL has been added + to pngvalid to test the functionality (pngtest does not supply it, + deliberately). The spurious "_EXPORTS" has been removed from the + libpng build (all these errors were a result of copy/paste between project + configurations.) + Added new types and internal functions for CIE RGB end point handling to + pngpriv.h (functions yet to be implemented). + +Version 1.5.5beta06 [August 26, 2011] + Ensure the CMAKE_LIBRARY_OUTPUT_DIRECTORY is set in CMakeLists.txt + (Clifford Yap) + Fixes to rgb_to_gray and cHRM XYZ APIs (John Bowler): + The rgb_to_gray code had errors when combined with gamma correction. + Some pixels were treated as true grey when they weren't and such pixels + and true grey ones were not gamma corrected (the original value of the + red component was used instead). APIs to get and set cHRM using color + space end points have been added and the rgb_to_gray code that defaults + based on cHRM, and the divide-by-zero bug in png_handle_cHRM (CERT + VU#477046, CVE-2011-3328, introduced in 1.5.4) have been corrected. + A considerable number of tests has been added to pngvalid for the + rgb_to_gray transform. + Arithmetic errors in rgb_to_gray whereby the calculated gray value was + truncated to the bit depth rather than rounded have been fixed except in + the 8-bit non-gamma-corrected case (where consistency seems more important + than correctness.) The code still has considerable inaccuracies in the + 8-bit case because 8-bit linear arithmetic is used. + +Version 1.5.5beta07 [September 7, 2011] + Added "$(ARCH)" option to makefile.darwin + Added SunOS support to configure.ac and Makefile.am + Changed png_chunk_benign_error() to png_warning() in png.c, in + png_XYZ_from_xy_checked(). + +Version 1.5.5beta08 [September 10, 2011] + Fixed 64-bit compilation errors (gcc). The errors fixed relate + to conditions where types that are 32 bits in the GCC 32-bit + world (uLong and png_size_t) become 64 bits in the 64-bit + world. This produces potential truncation errors which the + compiler correctly flags. + Relocated new HAVE_SOLARIS_LD definition in configure.ac + Constant changes for 64-bit compatibility (removal of L suffixes). The + 16-bit cases still use "L" as we don't have a 16-bit test system. + +Version 1.5.5rc01 [September 15, 2011] + Removed "L" suffixes in pngpriv.h + +Version 1.5.5 [September 22, 2011] + No changes. + +Version 1.5.6beta01 [September 22, 2011] + Fixed some 64-bit type conversion warnings in pngrtran.c + Moved row_info from png_struct to a local variable. + The various interlace mask arrays have been made into arrays of + bytes and made PNG_CONST and static (previously some arrays were + marked PNG_CONST and some weren't). + Additional checks have been added to the transform code to validate the + pixel depths after the transforms on both read and write. + Removed some redundant code from pngwrite.c, in png_destroy_write_struct(). + Changed chunk reading/writing code to use png_uint_32 instead of png_byte[4]. + This removes the need to allocate temporary strings for chunk names on + the stack in the read/write code. Unknown chunk handling still uses the + string form because this is exposed in the API. + +Version 1.5.6beta02 [September 26, 2011] + Added a note in the manual the png_read_update_info() must be called only + once with a particular info_ptr. + Fixed a typo in the definition of the new PNG_STRING_FROM_CHUNK(s,c) macro. + +Version 1.5.6beta03 [September 28, 2011] + Revised test-pngtest.sh to report FAIL when pngtest fails. + Added "--strict" option to pngtest, to report FAIL when the failure is + only because the resulting valid files are different. + Revised CMakeLists.txt to work with mingw and removed some material from + CMakeLists.txt that is no longer useful in libpng-1.5. + +Version 1.5.6beta04 [October 5, 2011] + Fixed typo in Makefile.in and Makefile.am ("-M Wl" should be "-M -Wl")." + +Version 1.5.6beta05 [October 12, 2011] + Speed up png_combine_row() for interlaced images. This reduces the generality + of the code, allowing it to be optimized for Adam7 interlace. The masks + passed to png_combine_row() are now generated internally, avoiding + some code duplication and localizing the interlace handling somewhat. + Align png_struct::row_buf - previously it was always unaligned, caused by + a bug in the code that attempted to align it; the code needs to subtract + one from the pointer to take account of the filter byte prepended to + each row. + Optimized png_combine_row() when rows are aligned. This gains a small + percentage for 16-bit and 32-bit pixels in the typical case where the + output row buffers are appropriately aligned. The optimization was not + previously possible because the png_struct buffer was always misaligned. + Fixed bug in png_write_chunk_header() debug print, introduced in 1.5.6beta01. + +Version 1.5.6beta06 [October 17, 2011] + Removed two redundant tests for unitialized row. + Fixed a relatively harmless memory overwrite in compressed text writing + with a 1 byte zlib buffer. + Add ability to call png_read_update_info multiple times to pngvalid.c. + Fixes for multiple calls to png_read_update_info. These fixes attend to + most of the errors revealed in pngvalid, however doing the gamma work + twice results in inaccuracies that can't be easily fixed. There is now + a warning in the code if this is going to happen. + Turned on multiple png_read_update_info in pngvalid transform tests. + Prevent libpng from overwriting unused bits at the end of the image when + it is not byte aligned, while reading. Prior to libpng-1.5.6 libpng would + overwrite the partial byte at the end of each row if the row width was not + an exact multiple of 8 bits and the image is not interlaced. + +Version 1.5.6beta07 [October 21, 2011] + Made png_ptr->prev_row an aligned pointer into png_ptr->big_prev_row + (Mans Rullgard). + +Version 1.5.6rc01 [October 26, 2011] + Changed misleading "Missing PLTE before cHRM" warning to "Out of place cHRM" + +Version 1.5.6rc02 [October 27, 2011] + Added LSR() macro to defend against buggy compilers that evaluate non-taken + code branches and complain about out-of-range shifts. + +Version 1.5.6rc03 [October 28, 2011] + Renamed the LSR() macro to PNG_LSR() and added PNG_LSL() macro. + Fixed compiler warnings with Intel and MSYS compilers. The logical shift + fix for Microsoft Visual C is required by other compilers, so this + enables that fix for all compilers when using compile-time constants. + Under MSYS 'byte' is a name declared in a system header file, so we + changed the name of a local variable to avoid the warnings that result. + Added #define PNG_ALIGN_TYPE PNG_ALIGN_NONE to contrib/pngminim/*/pngusr.h + +Version 1.5.6 [November 3, 2011] + No changes. + +Version 1.5.7beta01 [November 4, 2011] + Added support for ARM processor, when decoding all PNG up-filtered rows + and any other-filtered rows with 3 or 4 bytes per pixel (Mans Rullgard). + Fixed bug in pngvalid on early allocation failure; fixed type cast in + pngmem.c; pngvalid would attempt to call png_error() if the allocation + of a png_struct or png_info failed. This would probably have led to a + crash. The pngmem.c implementation of png_malloc() included a cast + to png_size_t which would fail on large allocations on 16-bit systems. + Fix for the preprocessor of the Intel C compiler. The preprocessor + splits adjacent @ signs with a space; this changes the concatentation + token from @-@-@ to PNG_JOIN; that should work with all compiler + preprocessors. + Paeth filter speed improvements from work by Siarhei Siamashka. This + changes the 'Paeth' reconstruction function to improve the GCC code + generation on x86. The changes are only part of the suggested ones; + just the changes that definitely improve speed and remain simple. + The changes also slightly increase the clarity of the code. + +Version 1.5.7beta02 [November 11, 2011] + Check compression_type parameter in png_get_iCCP and remove spurious + casts. The compression_type parameter is always assigned to, so must + be non-NULL. The cast of the profile length potentially truncated the + value unnecessarily on a 16-bit int system, so the cast of the (byte) + compression type to (int) is specified by ANSI-C anyway. + Fixed FP division by zero in pngvalid.c; the 'test_pixel' code left + the sBIT fields in the test pixel as 0, which resulted in a floating + point division by zero which was irrelevant but causes systems where + FP exceptions cause a crash. Added code to pngvalid to turn on FP + exceptions if the appropriate glibc support is there to ensure this is + tested in the future. + Updated scripts/pnglibconf.mak and scripts/makefile.std to handle the + new PNG_JOIN macro. + Added versioning to pnglibconf.h comments. + Simplified read/write API initial version; basic read/write tested on + a variety of images, limited documentation (in the header file.) + Installed more accurate linear to sRGB conversion tables. The slightly + modified tables reduce the number of 16-bit values that + convert to an off-by-one 8-bit value. The "makesRGB.c" code that was used + to generate the tables is now in a contrib/sRGBtables sub-directory. + +Version 1.5.7beta03 [November 17, 2011] + Removed PNG_CONST from the sRGB table declarations in pngpriv.h and png.c + Added run-time detection of NEON support. + Added contrib/libtests; includes simplified API test and timing test and + a color conversion utility for rapid checking of failed 'pngstest' results. + Multiple transform bug fixes plus a work-round for double gamma correction. + libpng does not support more than one transform that requires linear data + at once - if this is tried typically the results is double gamma + correction. Since the simplified APIs can need rgb to gray combined with + a compose operation it is necessary to do one of these outside the main + libpng transform code. This check-in also contains fixes to various bugs + in the simplified APIs themselves and to some bugs in compose and rgb to + gray (on palette) itself. + Fixes for C++ compilation using g++ When libpng source is compiled + using g++. The compiler imposes C++ rules on the C source; thus it + is desireable to make the source work with either C or C++ rules + without throwing away useful error information. This change adds + png_voidcast to allow C semantic (void*) cases or the corresponding + C++ static_cast operation, as appropriate. + Added --noexecstack to assembler file compilation. GCC does not set + this on assembler compilation, even though it does on C compilation. + This creates security issues if assembler code is enabled; the + work-around is to set it by default in the flags for $(CCAS) + Work around compilers that don't support declaration of const data. Some + compilers fault 'extern const' data declarations (because the data is + not initialized); this turns on const-ness only for compilers where + this is known to work. + +Version 1.5.7beta04 [November 17, 2011] + Since the gcc driver does not recognize the --noexecstack flag, we must + use the -Wa prefix to have it passed through to the assembler. + Also removed a duplicate setting of this flag. + Added files that were omitted from the libpng-1.5.7beta03 zip distribution. + +Version 1.5.7beta05 [November 25, 2011] + Removed "zTXt" from warning in generic chunk decompression function. + Validate time settings passed to png_set_tIME() and png_convert_to_rfc1123() + (Frank Busse). Note: This prevented CVE-2015-7981 from affecting + libpng-1.5.7 and later. + Added MINGW support to CMakeLists.txt + Reject invalid compression flag or method when reading the iTXt chunk. + Backed out 'simplified' API changes. The API seems too complex and there + is a lack of consensus or enthusiasm for the proposals. The API also + reveals significant bugs inside libpng (double gamma correction and the + known bug of being unable to retrieve a corrected palette). It seems + better to wait until the bugs, at least, are corrected. + Moved pngvalid.c into contrib/libtests + Rebuilt Makefile.in, configure, etc., with autoconf-2.68 + +Version 1.5.7rc01 [December 1, 2011] + Replaced an "#if" with "#ifdef" in pngrtran.c + Revised #if PNG_DO_BC block in png.c (use #ifdef and add #else) + +Version 1.5.7rc02 [December 5, 2011] + Revised project files and contrib/pngvalid/pngvalid.c to account for + the relocation of pngvalid into contrib/libtests. + Revised pngconf.h to use " __declspec(restrict)" only when MSC_VER >= 1400, + as in libpng-1.5.4. + Put CRLF line endings in the owatcom project files. + +Version 1.5.7rc03 [December 7, 2011] + Updated CMakeLists.txt to account for the relocation of pngvalid.c + +Version 1.5.7 [December 15, 2011] + Minor fixes to pngvalid.c for gcc 4.6.2 compatibility to remove warnings + reported by earlier versions. + Fixed minor memset/sizeof errors in pngvalid.c. + +Version 1.6.0beta01 [December 15, 2011] + Removed machine-generated configure files from the GIT repository (they will + continue to appear in the tarball distributions and in the libpng15 and + earlier GIT branches). + Restored the new 'simplified' API, which was started in libpng-1.5.7beta02 + but later deleted from libpng-1.5.7beta05. + Added example programs for the new 'simplified' API. + Added ANSI-C (C90) headers and require them, and take advantage of the + change. Also fixed some of the projects/* and contrib/* files that needed + updates for libpng16 and the move of pngvalid.c. + With this change the required ANSI-C header files are assumed to exist: the + implementation must provide float.h, limits.h, stdarg.h and stddef.h and + libpng relies on limits.h and stddef.h existing and behaving as defined + (the other two required headers aren't used). Non-ANSI systems that don't + have stddef.h or limits.h will have to provide an appropriate fake + containing the relevant types and #defines. + Dropped support for 16-bit platforms. The use of FAR/far has been eliminated + and the definition of png_alloc_size_t is now controlled by a flag so + that 'small size_t' systems can select it if necessary. Libpng 1.6 may + not currently work on such systems -- it seems likely that it will + ask 'malloc' for more than 65535 bytes with any image that has a + sufficiently large row size (rather than simply failing to read such + images). + New tools directory containing tools used to generate libpng code. + Fixed race conditions in parallel make builds. With higher degrees of + parallelism during 'make' the use of the same temporary file names such + as 'dfn*' can result in a race where a temporary file from one arm of the + build is deleted or overwritten in another arm. This changes the + temporary files for suffix rules to always use $* and ensures that the + non-suffix rules use unique file names. + +Version 1.6.0beta02 [December 21, 2011] + Correct configure builds where build and source directories are separate. + The include path of 'config.h' was erroneously made relative in pngvalid.c + in libpng 1.5.7. + +Version 1.6.0beta03 [December 22, 2011] + Start-up code size improvements, error handler flexibility. These changes + alter how the tricky allocation of the initial png_struct and png_info + structures are handled. png_info is now handled in pretty much the same + way as everything else, except that the allocations handle NULL return + silently. png_struct is changed in a similar way on allocation and on + deallocation a 'safety' error handler is put in place (which should never + be required). The error handler itself is changed to permit mismatches + in the application and libpng error buffer size; however, this means a + silent change to the API to return the jmp_buf if the size doesn't match + the size from the libpng compilation; libpng now allocates the memory and + this may fail. Overall these changes result in slight code size + reductions; however, this is a reduction in code that is always executed + so is particularly valuable. Overall on a 64-bit system the libpng DLL + decreases in code size by 1733 bytes. pngerror.o increases in size by + about 465 bytes because of the new functionality. + Added png_convert_to_rfc1123_buffer() and deprecated png_convert_to_rfc1123() + to avoid including a spurious buffer in the png_struct. + +Version 1.6.0beta04 [December 30, 2011] + Regenerated configure scripts with automake-1.11.2 + Eliminated png_info_destroy(). It is now used only in png.c and only calls + one other internal function and memset(). + Enabled png_get_sCAL_fixed() if floating point APIs are enabled. Previously + it was disabled whenever internal fixed point arithmetic was selected, + which meant it didn't exist even on systems where FP was available but not + preferred. + Added pngvalid.c compile time checks for const APIs. + Implemented 'restrict' for png_info and png_struct. Because of the way + libpng works both png_info and png_struct are always accessed via a + single pointer. This means adding C99 'restrict' to the pointer gives + the compiler some opportunity to optimize the code. This change allows + that. + Moved AC_MSG_CHECKING([if libraries can be versioned]) later to the proper + location in configure.ac (Gilles Espinasse). + Changed png_memcpy to C assignment where appropriate. Changed all those + uses of png_memcpy that were doing a simple assignment to assignments + (all those cases where the thing being copied is a non-array C L-value). + Added some error checking to png_set_*() routines. + Removed the reference to the non-exported function png_memcpy() from + example.c. + Fixed the Visual C 64-bit build - it requires jmp_buf to be aligned, but + it had become misaligned. + Revised contrib/pngminus/pnm2png.c to avoid warnings when png_uint_32 + and unsigned long are of different sizes. + +Version 1.6.0beta05 [January 15, 2012] + Updated manual with description of the simplified API (copied from png.h) + Fix bug in pngerror.c: some long warnings were being improperly truncated + (CVE-2011-3464, bug introduced in libpng-1.5.3beta05). + +Version 1.6.0beta06 [January 24, 2012] + Added palette support to the simplified APIs. This commit + changes some of the macro definitions in png.h, app code + may need corresponding changes. + Increased the formatted warning buffer to 192 bytes. + Added color-map support to simplified API. This is an initial version for + review; the documentation has not yet been updated. + Fixed Min/GW uninstall to remove libpng.dll.a + +Version 1.6.0beta07 [January 28, 2012] + Eliminated Intel icc/icl compiler warnings. The Intel (GCC derived) + compiler issues slightly different warnings from those issued by the + current vesions of GCC. This eliminates those warnings by + adding/removing casts and small code rewrites. + Updated configure.ac from autoupdate: added --enable-werror option. + Also some layout regularization and removal of introduced tab characters + (replaced with 3-character indentation). Obsolete macros identified by + autoupdate have been removed; the replacements are all in 2.59 so + the pre-req hasn't been changed. --enable-werror checks for support + for -Werror (or the given argument) in the compiler. This mimics the + gcc configure option by allowing -Werror to be turned on safely; without + the option the tests written in configure itself fail compilation because + they cause compiler warnings. + Rewrote autogen.sh to run autoreconf instead of running tools one-by-one. + Conditionalize the install rules for MINGW and CYGWIN in CMakeLists.txt and + set CMAKE_LIBRARY_OUTPUT_DIRECTORY to "lib" on all platforms (C. Yapp). + Freeze libtool files in the 'scripts' directory. This version of autogen.sh + attempts to dissuade people from running it when it is not, or should not, + be necessary. In fact, autogen.sh does not work when run in a libpng + directory extracted from a tar distribution anymore. You must run it in + a GIT clone instead. + Added two images to contrib/pngsuite (1-bit and 2-bit transparent grayscale), + and renamed three whose names were inconsistent with those in + pngsuite/README.txt. + +Version 1.6.0beta08 [February 1, 2012] + Fixed Image::colormap misalignment in pngstest.c + Check libtool/libtoolize version number (2.4.2) in configure.ac + Divide test-pngstest.sh into separate pngstest runs for basic and + transparent images. + Moved automake options to AM_INIT_AUTOMAKE in configure.ac + Added color-tests, silent-rules (Not yet implemented in Makefile.am) and + version checking to configure.ac + Improved pngstest speed by not doing redundant tests and add const to + the background parameter of png_image_finish_read. The --background + option is now done automagically only when required, so that commandline + option no longer exists. + Cleaned up pngpriv.h to consistently declare all functions and data. + Also eliminated PNG_CONST_DATA, which is apparently not needed but we + can't be sure until it is gone. + Added symbol prefixing that allows all the libpng external symbols + to be prefixed (suggested by Reuben Hawkins). + Updated "ftbb*.png" list in the owatcom and vstudio projects. + Fixed 'prefix' builds on clean systems. The generation of pngprefix.h + should not require itself. + Updated INSTALL to explain that autogen.sh must be run in a GIT clone, + not in a libpng directory extracted from a tar distribution. + +Version 1.6.0beta09 [February 1, 2012] + Reverted the prebuilt configure files to libpng-1.6.0beta05 condition. + +Version 1.6.0beta10 [February 3, 2012] + Added Z_SOLO for zlib-1.2.6+ and correct pngstest tests + Updated list of test images in CMakeLists.txt + Updated the prebuilt configure files to current condition. + Revised INSTALL information about autogen.sh; it works in tar distributions. + +Version 1.6.0beta11 [February 16, 2012] + Fix character count in pngstest command in projects/owatcom/pngstest.tgt + Revised test-pngstest.sh to report PASS/FAIL for each image. + Updated documentation about the simplified API. + Corrected estimate of error in libpng png_set_rgb_to_gray API. The API is + extremely inaccurate for sRGB conversions because it uses an 8-bit + intermediate linear value and it does not use the sRGB transform, so it + suffers from the known instability in gamma transforms for values close + to 0 (see Poynton). The net result is that the calculation has a maximum + error of 14.99/255; 0.5/255^(1/2.2). pngstest now uses 15 for the + permitted 8-bit error. This may still not be enough because of arithmetic + error. + Removed some unused arrays (with #ifdef) from png_read_push_finish_row(). + Fixed a memory overwrite bug in simplified read of RGB PNG with + non-linear gamma Also bugs in the error checking in pngread.c and changed + quite a lot of the checks in pngstest.c to be correct; either correctly + written or not over-optimistic. The pngstest changes are insufficient to + allow all possible RGB transforms to be passed; pngstest cmppixel needs + to be rewritten to make it clearer which errors it allows and then changed + to permit known inaccuracies. + Removed tests for no-longer-used *_EMPTY_PLTE_SUPPORTED from pngstruct.h + Fixed fixed/float API export conditionals. 1) If FIXED_POINT or + FLOATING_POINT options were switched off, png.h ended up with lone ';' + characters. This is not valid ANSI-C outside a function. The ';' + characters have been moved inside the definition of PNG_FP_EXPORT and + PNG_FIXED_EXPORT. 2) If either option was switched off, the declaration + of the corresponding functions were completely omitted, even though some + of them are still used internally. The result is still valid, but + produces warnings from gcc with some warning options (including -Wall). The + fix is to cause png.h to declare the functions with PNG_INTERNAL_FUNCTION + when png.h is included from pngpriv.h. + Check for invalid palette index while reading paletted PNG. When one is + found, issue a warning and increase png_ptr->num_palette accordingly. + Apps are responsible for checking to see if that happened. + +Version 1.6.0beta12 [February 18, 2012] + Do not increase num_palette on invalid_index. + Relocated check for invalid palette index to pngrtran.c, after unpacking + the sub-8-bit pixels. + Fixed CVE-2011-3026 buffer overrun bug. This bug was introduced when + iCCP chunk support was added at libpng-1.0.6. Deal more correctly with the + test on iCCP chunk length. Also removed spurious casts that may hide + problems on 16-bit systems. + +Version 1.6.0beta13 [February 24, 2012] + Eliminated redundant png_push_read_tEXt|zTXt|iTXt|unknown code from + pngpread.c and use the sequential png_handle_tEXt, etc., in pngrutil.c; + now that png_ptr->buffer is inaccessible to applications, the special + handling is no longer useful. + Added PNG_SAFE_LIMITS feature to pnglibconf.dfa, pngpriv.h, and new + pngusr.dfa to reset the user limits to safe ones if PNG_SAFE_LIMITS is + defined. To enable, use "CPPFLAGS=-DPNG_SAFE_LIMITS_SUPPORTED=1" on the + configure command or put #define PNG_SAFE_LIMITS_SUPPORTED in + pnglibconf.h.prebuilt and pnglibconf.h. + +Version 1.6.0beta14 [February 27, 2012] + Added information about the new limits in the manual. + Updated Makefile.in + +Version 1.6.0beta15 [March 2, 2012] + Removed unused "current_text" members of png_struct and the png_free() + of png_ptr->current_text from pngread.c + Rewrote pngstest.c for substantial speed improvement. + Fixed transparent pixel and 16-bit rgb tests in pngstest and removed a + spurious check in pngwrite.c + Added PNG_IMAGE_FLAG_FAST for the benefit of applications that store + intermediate files, or intermediate in-memory data, while processing + image data with the simplified API. The option makes the files larger + but faster to write and read. pngstest now uses this by default; this + can be disabled with the --slow option. + Improved pngstest fine tuning of error numbers, new test file generator. + The generator generates images that test the full range of sample values, + allow the error numbers in pngstest to be tuned and checked. makepng + also allows generation of images with extra chunks, although this is + still work-in-progress. + Added check for invalid palette index while reading. + Fixed some bugs in ICC profile writing. The code should now accept + all potentially valid ICC profiles and reject obviously invalid ones. + It now uses png_error() to do so rather than casually writing a PNG + without the necessary color data. + Removed whitespace from the end of lines in all source files and scripts. + +Version 1.6.0beta16 [March 6, 2012] + Relocated palette-index checking function from pngrutil.c to pngtrans.c + Added palette-index checking while writing. + Changed png_inflate() and calling routines to avoid overflow problems. + This is an intermediate check-in that solves the immediate problems and + introduces one performance improvement (avoiding a copy via png_ptr->zbuf.) + Further changes will be made to make ICC profile handling more secure. + Fixed build warnings (MSVC, GCC, GCC v3). Cygwin GCC with default options + declares 'index' as a global, causing a warning if it is used as a local + variable. GCC 64-bit warns about assigning a (size_t) (unsigned 64-bit) + to an (int) (signed 32-bit). MSVC, however, warns about using the + unary '-' operator on an unsigned value (even though it is well defined + by ANSI-C to be ~x+1). The padding calculation was changed to use a + different method. Removed the tests on png_ptr->pass. + Added contrib/libtests/tarith.c to test internal arithmetic functions from + png.c. This is a libpng maintainer program used to validate changes to the + internal arithmetic functions. + Made read 'inflate' handling like write 'deflate' handling. The read + code now claims and releases png_ptr->zstream, like the write code. + The bug whereby the progressive reader failed to release the zstream + is now fixed, all initialization is delayed, and the code checks for + changed parameters on deflate rather than always calling + deflatedEnd/deflateInit. + Validate the zTXt strings in pngvalid. + Added code to validate the windowBits value passed to deflateInit2(). + If the call to deflateInit2() is wrong a png_warning will be issued + (in fact this is harmless, but the PNG data produced may be sub-optimal). + +Version 1.6.0beta17 [March 10, 2012] + Fixed PNG_LIBPNG_BUILD_BASE_TYPE definition. + Reject all iCCP chunks after the first, even if the first one is invalid. + Deflate/inflate was reworked to move common zlib calls into single + functions [rw]util.c. A new shared keyword check routine was also added + and the 'zbuf' is no longer allocated on progressive read. It is now + possible to call png_inflate() incrementally. A warning is no longer + issued if the language tag or translated keyword in the iTXt chunk + has zero length. + If benign errors are disabled use maximum window on ancilliary inflate. + This works round a bug introduced in 1.5.4 where compressed ancillary + chunks could end up with a too-small windowBits value in the deflate + header. + +Version 1.6.0beta18 [March 16, 2012] + Issue a png_benign_error() instead of png_warning() about bad palette index. + In pngtest, treat benign errors as errors if "-strict" is present. + Fixed an off-by-one error in the palette index checking function. + Fixed a compiler warning under Cygwin (Windows-7, 32-bit system) + Revised example.c to put text strings in a temporary character array + instead of directly assigning string constants to png_textp members. + This avoids compiler warnings when -Wwrite-strings is enabled. + Added output flushing to aid debugging under Visual Studio. Unfortunately + this is necessary because the VS2010 output window otherwise simply loses + the error messages on error (they weren't flushed to the window before + the process exited, apparently!) + Added configuration support for benign errors and changed the read + default. Also changed some warnings in the iCCP and sRGB handling + from to benign errors. Configuration now makes read benign + errors warnings and write benign errors to errors by default (thus + changing the behavior on read). The simplified API always forces + read benign errors to warnings (regardless of the system default, unless + this is disabled in which case the simplified API can't be built.) + +Version 1.6.0beta19 [March 18, 2012] + Work around for duplicate row start calls; added warning messages. + This turns on PNG_FLAG_DETECT_UNINITIALIZED to detect app code that + fails to call one of the 'start' routines (not enabled in libpng-1.5 + because it is technically an API change, since it did normally work + before.) It also makes duplicate calls to png_read_start_row (an + internal function called at the start of the image read) benign, as + they were before changes to use png_inflate_claim. Somehow webkit is + causing this to happen; this is probably a mis-feature in the zlib + changes so this commit is only a work-round. + Removed erroneous setting of DETECT_UNINITIALIZED and added more + checks. The code now does a png_error if an attempt is made to do the + row initialization twice; this is an application error and it has + serious consequences because the transform data in png_struct is + changed by each call. + Added application error reporting and added chunk names to read + benign errors; also added --strict to pngstest - not enabled + yet because a warning is produced. + Avoid the double gamma correction warning in the simplified API. + This allows the --strict option to pass in the pngstest checks + +Version 1.6.0beta20 [March 29, 2012] + Changed chunk handler warnings into benign errors, incrementally load iCCP + Added checksum-icc.c to contrib/tools + Prevent PNG_EXPAND+PNG_SHIFT doing the shift twice. + Recognize known sRGB ICC profiles while reading; prefer writing the + iCCP profile over writing the sRGB chunk, controlled by the + PNG_sRGB_PROFILE_CHECKS option. + Revised png_set_text_2() to avoid potential memory corruption (fixes + CVE-2011-3048, also known as CVE-2012-3425). + +Version 1.6.0beta21 [April 27, 2012] + Revised scripts/makefile.darwin: use system zlib; remove quotes around + architecture list; add missing ppc architecture; add architecture options + to shared library link; don't try to create a shared lib based on missing + RELEASE variable. + Enable png_set_check_for_invalid_index() for both read and write. + Removed #ifdef PNG_HANDLE_AS_UNKNOWN_SUPPORTED in pngpriv.h around + declaration of png_handle_unknown(). + Added -lssp_nonshared in a comment in scripts/makefile.freebsd + and changed deprecated NOOBJ and NOPROFILE to NO_OBJ and NO_PROFILE. + +Version 1.6.0beta22 [May 23, 2012] + Removed need for -Wno-cast-align with clang. clang correctly warns on + alignment increasing pointer casts when -Wcast-align is passed. This + fixes the cases that clang warns about either by eliminating the + casts from png_bytep to png_uint_16p (pngread.c), or, for pngrutil.c + where the cast is previously verified or pngstest.c where it is OK, by + introducing new png_aligncast macros to do the cast in a way that clang + accepts. + +Version 1.6.0beta23 [June 6, 2012] + Revised CMakeLists.txt to not attempt to make a symlink under mingw. + Made fixes for new optimization warnings from gcc 4.7.0. The compiler + performs an optimization which is safe; however it then warns about it. + Changing the type of 'palette_number' in pngvalid.c removes the warning. + Do not depend upon a GCC feature macro being available for use in generating + the linker mapfile symbol prefix. + Improved performance of new do_check_palette_indexes() function (only + update the value when it actually increases, move test for whether + the check is wanted out of the function. + +Version 1.6.0beta24 [June 7, 2012] + Don't check palette indexes if num_palette is 0 (as it can be in MNG files). + +Version 1.6.0beta25 [June 16, 2012] + Revised png_set_keep_unknown_chunks() so num_chunks < 0 means ignore all + unknown chunks and all known chunks except for IHDR, PLTE, tRNS, IDAT, + and IEND. Previously it only meant ignore all unknown chunks, the + same as num_chunks == 0. Revised png_image_skip_unused_chunks() to + provide a list of chunks to be processed instead of a list of chunks to + ignore. Revised contrib/gregbook/readpng2.c accordingly. + +Version 1.6.0beta26 [July 10, 2012] + Removed scripts/makefile.cegcc from the *.zip and *.7z distributions; it + depends on configure, which is not included in those archives. + Moved scripts/chkfmt to contrib/tools. + Changed "a+w" to "u+w" in Makefile.in to fix CVE-2012-3386. + +Version 1.6.0beta27 [August 11, 2012] + Do not compile PNG_DEPRECATED, PNG_ALLOC and PNG_PRIVATE when __GNUC__ < 3. + Do not use __restrict when GNUC is <= 3.1 + Removed references to png_zalloc() and png_zfree() from the manual. + Fixed configurations where floating point is completely disabled. Because + of the changes to support symbol prefixing PNG_INTERNAL_FUNCTION declares + floating point APIs during libpng builds even if they are completely + disabled. This requires the png floating point types (png_double*) to be + declared even though the functions are never actually defined. This + change provides a dummy definition so that the declarations work, yet any + implementation will fail to compile because of an incomplete type. + Re-eliminated the use of strcpy() in pngtest.c. An unncessary use of + strcpy() was accidentally re-introduced in libpng16; this change replaces + it with strncpy(). + Eliminated use of png_sizeof(); use sizeof() instead. + Use a consistent style for (sizeof type) and (sizeof (array)) + Cleanup of png_set_filler(). This function does very different things on + read and write. In libpng 1.6 the two cases can be distinguished and + considerable code cleanup, and extra error checking, is possible. This + makes calls on the write side that have no effect be ignored with a + png_app_error(), which can be disabled in the app using + png_set_benign_errors(), and removes the spurious use of usr_channels + on the read side. + Insist on autotools 1.12.1 for git builds because there are security issues + with 1.12 and insisting on anything less would allow 1.12 to be used. + Removed info_ptr->signature[8] from WRITE-only builds. + Add some conditions for compiling png_fixed(). This is a small function + but it requires "-lm" on some platforms. + Cause pngtest --strict to fail on any warning from libpng (not just errors) + and cause it not to fail at the comparison step if libpng lacks support + for writing chunks that it reads from the input (currently only implemented + for compressed text chunks). + Make all three "make check" test programs work without READ or WRITE support. + Now "make check" will succeed even if libpng is compiled with -DPNG_NO_READ + or -DPNG_NO_WRITE. The tests performed are reduced, but the basic reading + and writing of a PNG file is always tested by one or more of the tests. + Consistently use strlen(), memset(), memcpy(), and memcmp() instead of the + png_strlen(), png_memset(), png_memcpy(), and png_memcmp() macros. + Removed the png_sizeof(), png_strlen(), png_memset(), png_memcpy(), and + png_memcmp() macros. + Work around gcc 3.x and Microsoft Visual Studio 2010 complaints. Both object + to the split initialization of num_chunks. + +Version 1.6.0beta28 [August 29, 2012] + Unknown handling fixes and clean up. This adds more correct option + control of the unknown handling, corrects the pre-existing bug where + the per-chunk 'keep' setting is ignored and makes it possible to skip + IDAT chunks in the sequential reader (broken in earlier 1.6 versions). + There is a new test program, test-unknown.c, which is a work in progress + (not currently part of the test suite). Comments in the header files now + explain how the unknown handling works. + Allow fine grain control of unknown chunk APIs. This change allows + png_set_keep_unknown_chunks() to be turned off if not required and causes + both read and write to behave appropriately (on read this is only possible + if the user callback is used to handle unknown chunks). The change + also removes the support for storing unknown chunks in the info_struct + if the only unknown handling enabled is via the callback, allowing libpng + to be configured with callback reading and none of the unnecessary code. + Corrected fix for unknown handling in pngtest. This reinstates the + libpng handling of unknown chunks other than vpAg and sTER (including + unsafe-to-copy chunks which were dropped before) and eliminates the + repositioning of vpAg and sTER in pngtest.png by changing pngtest.png + (so the chunks are where libpng would put them). + Added "tunknown" test and corrected a logic error in png_handle_unknown() + when SAVE support is absent. Moved the shell test scripts for + contrib/libtests from the libpng top directory to contrib/libtests. + png_handle_unknown() must always read or skip the chunk, if + SAVE_UNKNOWN_CHUNKS is turned off *and* the application does not set + a user callback an unknown chunk will not be read, leading to a read + error, which was revealed by the "tunknown" test. + Cleaned up and corrected ICC profile handling. + contrib/libtests/makepng: corrected 'rgb' and 'gray' cases. profile_error + messages could be truncated; made a correct buffer size calculation and + adjusted pngerror.c appropriately. png_icc_check_* checking improved; + changed the functions to receive the correct color type of the PNG on read + or write and check that it matches the color space of the profile (despite + what the comments said before, there is danger in assuming the app will + cope correctly with an RGB profile on a grayscale image and, since it + violates the PNG spec, allowing it is certain to produce inconsistent + app behavior and might even cause app crashes.) Check that profiles + contain the tags needed to process the PNG (tags all required by the ICC + spec). Removed unused PNG_STATIC from pngpriv.h. + +Version 1.6.0beta29 [September 4, 2012] + Fixed the simplified API example programs to add the *colormap parameter + to several of he API and improved the error message if the version field + is not set. + Added contrib/examples/* to the *.zip and *.7z distributions. + Updated simplified API synopses and description of the png_image structure + in the manual. + Made makepng and pngtest produce identical PNGs, add "--relaxed" option + to pngtest. The "--relaxed" option turns off the benign errors that are + enabled by default in pre-RC builds. makepng can now write ICC profiles + where the length has not been extended to a multiple of 4, and pngtest + now intercepts all libpng errors, allowing the previously-introduced + "--strict test" on no warnings to actually work. + Improved ICC profile handling including cHRM chunk generation and fixed + Cygwin+MSVC build errors. The ICC profile handling now includes more + checking. Several errors that caused rejection of the profile are now + handled with a warning in such a way that the invalid profiles will be + read by default in release (but not pre-RC) builds but will not be + written by default. The easy part of handling the cHRM chunk is written, + where the ICC profile contains the required data. The more difficult + part plus guessing a gAMA value requires code to pass selected RGB values + through the profile. + +Version 1.6.0beta30 [October 24, 2012] + Changed ICC profile matrix/vector types to not depend on array type rules. + By the ANSI-C standard the new types should be identical to the previous + versions, and all known versions of gcc tested with the previous versions + except for GCC-4.2.1 work with this version. The change makes the ANSI-C + rule that const applied to an array of elements applies instead to the + elements in the array moot by explicitly applying const to the base + elements of the png_icc_matrix and png_icc_vector types. The accidental + (harmless) 'const' previously applied to the parameters of two of the + functions have also been removed. + Added a work around for GCC 4.2 optimization bug. + Marked the broken (bad white point) original HP sRGB profiles correctly and + correct comments. + Added -DZ_SOLO to contrib/pngminim/*/makefile to work with zlib-1.2.7 + Use /MDd for vstudio debug builds. Also added pngunkown to the vstudio + builds, fixed build errors and corrected a minor exit code error in + pngvalid if the 'touch' file name is invalid. + Add updated WARNING file to projects/vstudio from libpng 1.5/vstudio + Fixed build when using #define PNG_NO_READ_GAMMA in png_do_compose() in + pngrtran.c (Domani Hannes). + +Version 1.6.0beta31 [November 1, 2012] + Undid the erroneous change to vstudio/pngvalid build in libpng-1.6.0beta30. + Made pngvalid so that it will build outside the libpng source tree. + Made builds -DPNG_NO_READ_GAMMA compile (the unit tests still fail). + Made PNG_NO_READ_GAMMA switch off interfaces that depend on READ_GAMMA. + Prior to 1.6.0 switching off READ_GAMMA did unpredictable things to the + interfaces that use it (specifically, png_do_background in 1.4 would + simply display composite for grayscale images but do composition + with the incorrect arithmetic for color ones). In 1.6 the semantic + of -DPNG_NO_READ_GAMMA is changed to simply disable any interface that + depends on it; this obliges people who set it to consider whether they + really want it off if they happen to use any of the interfaces in + question (typically most users who disable it won't). + Fixed GUIDs in projects/vstudio. Some were duplicated or missing, + resulting in VS2010 having to update the files. + Removed non-working ICC profile support code that was mostly added to + libpng-1.6.0beta29 and beta30. There was too much code for too little + gain; implementing full ICC color correction may be desireable but is left + up to applications. + +Version 1.6.0beta32 [November 25, 2012] + Fixed an intermittent SEGV in pngstest due to an uninitialized array element. + Added the ability for contrib/libtests/makepng.c to make a PNG with just one + color. This is useful for debugging pngstest color inaccuracy reports. + Fixed error checking in the simplified write API (Olaf van der Spek) + Made png_user_version_check() ok to use with libpng version 1.10.x and later. + +Version 1.6.0beta33 [December 15, 2012] + Fixed typo in png.c (PNG_SET_CHUNK_MALLOC_MAX should be PNG_CHUNK_MALLOC_MAX) + that causes the MALLOC_MAX limit not to work (John Bowler) + Change png_warning() to png_app_error() in pngwrite.c and comment the + fall-through condition. + Change png_warning() to png_app_warning() in png_write_tRNS(). + Rearranged the ARM-NEON optimizations: Isolated the machine specific code + to the hardware subdirectory and added comments to pngrutil.c so that + implementors of other optimizations know what to do. + Fixed cases of unquoted DESTDIR in Makefile.am + Rebuilt Makefile.in, etc., with autoconf-2.69 and automake-1.12.5. + +Version 1.6.0beta34 [December 19, 2012] + Cleaned up whitespace in the synopsis portion of the manpage "libpng.3" + Disassembled the version number in scripts/options.awk (necessary for + building on SunOs). + +Version 1.6.0beta35 [December 23, 2012] + Made default Zlib compression settings be configurable. This adds #defines to + pnglibconf.h to control the defaults. + Fixed Windows build issues, enabled ARM compilation. Various warnings issued + by earlier versions of GCC fixed for Cygwin and Min/GW (which both use old + GCCs.) ARM support is enabled by default in zlib.props (unsupported by + Microsoft) and ARM compilation is made possible by deleting the check for + x86. The test programs cannot be run because they are not signed. + +Version 1.6.0beta36 [January 2, 2013] + Discontinued distributing libpng-1.x.x.tar.bz2. + Discontinued distributing libpng-1.7.0-1.6.0-diff.txt and similar. + Rebuilt configure with autoconf-2.69 (inadvertently not done in beta33) + Fixed 'make distcheck' on SUN OS - libpng.so was not being removed + +Version 1.6.0beta37 [January 10, 2013] + Fixed conceivable but difficult to repro overflow. Also added two test + programs to generate and test a PNG which should have the problem. + +Version 1.6.0beta39 [January 19, 2013] + Again corrected attempt at overflow detection in png_set_unknown_chunks() + (CVE-2013-7353). Added overflow detection in png_set_sPLT() and + png_set_text_2() (CVE-2013-7354). + +Version 1.6.0beta40 [January 20, 2013] + Use consistent handling of overflows in text, sPLT and unknown png_set_* APIs + +Version 1.6.0rc01 [January 26, 2013] + No changes. + +Version 1.6.0rc02 [February 4, 2013] + Added png_get_palette_max() function. + +Version 1.6.0rc03 [February 5, 2013] + Fixed the png_get_palette_max API. + +Version 1.6.0rc04 [February 7, 2013] + Turn serial tests back on (recently turned off by autotools upgrade). + +Version 1.6.0rc05 [February 8, 2013] + Update manual about png_get_palette_max(). + +Version 1.6.0rc06 [February 9, 2013] + Fixed missing dependency in --prefix builds The intermediate + internal 'prefix.h' file can only be generated correctly after + pnglibconf.h, however the dependency was not in Makefile.am. The + symptoms are unpredictable depending on the order make chooses to + build pngprefix.h and pnglibconf.h, often the error goes unnoticed + because there is a system pnglibconf.h to use instead. + +Version 1.6.0rc07 [February 10, 2013] + Enclosed the new png_get_palette_max in #ifdef PNG_GET_PALETTE_MAX_SUPPORTED + block, and revised pnglibconf.h and pnglibconf.h.prebuilt accordingly. + +Version 1.6.0rc08 [February 10, 2013] + Fix typo in png.h #ifdef + +Version 1.6.0 [February 14, 2013] + No changes. + +Version 1.6.1beta01 [February 16, 2013] + Made symbol prefixing work with the ARM neon optimizations. Also allow + pngpriv.h to be included for preprocessor definitions only, so it can + be used in non-C/C++ files. Back ported from libpng 1.7. + Made sRGB check numbers consistent. + Ported libpng 1.5 options.awk/dfn file handling to 1.6, fixed one bug. + Removed cc -E workround, corrected png_get_palette_max API Tested on + SUN OS cc 5.9, which demonstrates the tokenization problem previously + avoided by using /lib/cpp. Since all .dfn output is now protected in + double quotes unless it is to be macro substituted the fix should + work everywhere. + Enabled parallel tests - back ported from libpng-1.7. + scripts/pnglibconf.dfa formatting improvements back ported from libpng17. + Fixed a race condition in the creation of the build 'scripts' directory + while building with a parallel make. + Use approved/supported Android method to check for NEON, use Linux/POSIX + 1003.1 API to check /proc/self/auxv avoiding buffer allocation and other + library calls (ported from libpng15). + +Version 1.6.1beta02 [February 19, 2013] + Use parentheses more consistently in "#if defined(MACRO)" tests. + Folded long lines. + Reenabled code to allow zero length PLTE chunks for MNG. + +Version 1.6.1beta03 [February 22, 2013] + Fixed ALIGNED_MEMORY support. + Added a new configure option: + --enable-arm-neon=always will stop the run-time checks. New checks + within arm/arm_init.c will cause the code not to be compiled unless + __ARM_NEON__ is set. This should make it fail safe (if someone asks + for it on then the build will fail if it can't be done.) + Updated the INSTALL document. + +Version 1.6.1beta04 [February 27, 2013] + Revised INSTALL to recommend using CPPFLAGS instead of INCLUDES. + Revised scripts/makefile.freebsd to respect ZLIBLIB and ZLIBINC. + Revised scripts/dfn.awk to work with the buggy MSYS awk that has trouble + with CRLF line endings. + +Version 1.6.1beta05 [March 1, 2013] + Avoid a possible memory leak in contrib/gregbook/readpng.c + +Version 1.6.1beta06 [March 4, 2013] + Better documentation of unknown handling API interactions. + Corrected Android builds and corrected libpng.vers with symbol + prefixing. It also makes those tests compile and link on Android. + Added an API png_set_option() to set optimization options externally, + providing an alternative and general solution for the non-portable + run-time tests used by the ARM Neon code, using the PNG_ARM_NEON option. + The order of settings vs options in pnglibconf.h is reversed to allow + settings to depend on options and options can now set (or override) the + defaults for settings. + +Version 1.6.1beta07 [March 7, 2013] + Corrected simplified API default gamma for color-mapped output, added + a flag to change default. In 1.6.0 when the simplified API was used + to produce color-mapped output from an input image with no gamma + information the gamma assumed for the input could be different from + that assumed for non-color-mapped output. In particular 16-bit depth + input files were assumed to be sRGB encoded, whereas in the 'direct' + case they were assumed to have linear data. This was an error. The + fix makes the simplified API treat all input files the same way and + adds a new flag to the png_image::flags member to allow the + application/user to specify that 16-bit files contain sRGB data + rather than the default linear. + Fixed bugs in the pngpixel and makepng test programs. + +Version 1.6.1beta08 [March 7, 2013] + Fixed CMakelists.txt to allow building a single variant of the library + (Claudio Bley): + Introduced a PNG_LIB_TARGETS variable that lists all activated library + targets. It is an error if this variable ends up empty, ie. you have + to build at least one library variant. + Made the *_COPY targets only depend on library targets actually being build. + Use PNG_LIB_TARGETS to unify a code path. + Changed the CREATE_SYMLINK macro to expect the full path to a file as the + first argument. When symlinking the filename component of that path is + determined and used as the link target. + Use copy_if_different in the CREATE_SYMLINK macro. + +Version 1.6.1beta09 [March 13, 2013] + Eliminated two warnings from the Intel C compiler. The warnings are + technically valid, although a reasonable treatment of division would + show it to be incorrect. + +Version 1.6.1rc01 [March 21, 2013] + No changes. + +Version 1.6.1 [March 28, 2013] + No changes. + +Version 1.6.2beta01 [April 14, 2013] + Updated documentation of 1.5.x to 1.6.x changes in iCCP chunk handling. + Fixed incorrect warning of excess deflate data. End condition - the + warning would be produced if the end of the deflate stream wasn't read + in the last row. The warning is harmless. + Corrected the test on user transform changes on read. It was in the + png_set of the transform function, but that doesn't matter unless the + transform function changes the rowbuf size, and that is only valid if + transform_info is called. + Corrected a misplaced closing bracket in contrib/libtests/pngvalid.c + (Flavio Medeiros). + Corrected length written to uncompressed iTXt chunks (Samuli Suominen). + Bug was introduced in libpng-1.6.0. + +Version 1.6.2rc01 [April 18, 2013] + Added contrib/tools/fixitxt.c, to repair the erroneous iTXt chunk length + written by libpng-1.6.0 and 1.6.1. + Disallow storing sRGB information when the sRGB is not supported. + +Version 1.6.2rc02 [April 18, 2013] + Merge pngtest.c with libpng-1.7.0 + +Version 1.6.2rc03 [April 22, 2013] + Trivial spelling cleanup. + +Version 1.6.2rc04 and 1.6.2rc05 [omitted] + +Version 1.6.2rc06 [April 24, 2013] + Reverted to version 1.6.2rc03. Recent changes to arm/neon support + have been ported to libpng-1.7.0beta09 and will reappear in version + 1.6.3beta01. + +Version 1.6.2 [April 25, 2013] + No changes. + +Version 1.6.3beta01 [April 25, 2013] + Revised stack marking in arm/filter_neon.S and configure.ac. + Ensure that NEON filter stuff is completely disabled when switched 'off'. + Previously the ARM NEON specific files were still built if the option + was switched 'off' as opposed to being explicitly disabled. + +Version 1.6.3beta02 [April 26, 2013] + Test for 'arm*' not just 'arm' in the host_cpu configure variable. + Rebuilt the configure scripts. + +Version 1.6.3beta03 [April 30, 2013] + Expanded manual paragraph about writing private chunks, particularly + the need to call png_set_keep_unknown_chunks() when writing them. + Avoid dereferencing NULL pointer possibly returned from + png_create_write_struct() (Andrew Church). + +Version 1.6.3beta05 [May 9, 2013] + Calculate our own zlib windowBits when decoding rather than trusting the + CMF bytes in the PNG datastream. + Added an option to force maximum window size for inflating, which was + the behavior of libpng15 and earlier, via a new PNG_MAXIMUM_INFLATE_WINDOW + option for png_set_options(). + Added png-fix-itxt and png-fix-too-far-back to the built programs and + removed warnings from the source code and timepng that are revealed as + a result. + Detect wrong libpng versions linked to png-fix-too-far-back, which currently + only works with libpng versions that can be made to reliably fail when + the deflate data contains an out-of-window reference. This means only + 1.6 and later. + Fixed gnu issues: g++ needs a static_cast, gcc 4.4.7 has a broken warning + message which it is easier to work round than ignore. + Updated contrib/pngminus/pnm2png.c (Paul Stewart): + Check for EOF + Ignore "#" delimited comments in input file to pnm2png.c. + Fixed whitespace handling + Added a call to png_set_packing() + Initialize dimension values so if sscanf fails at least we have known + invalid values. + Attempt to detect configuration issues with png-fix-too-far-back, which + requires both the correct libpng and the correct zlib to function + correctly. + Check ZLIB_VERNUM for mismatches, enclose #error in quotes + Added information in the documentation about problems with and fixes for + the bad CRC and bad iTXt chunk situations. + +Version 1.6.3beta06 [May 12, 2013] + Allow contrib/pngminus/pnm2png.c to compile without WRITE_INVERT and + WRITE_PACK supported (writes error message that it can't read P1 or + P4 PBM files). + Improved png-fix-too-far-back usage message, added --suffix option. + Revised contrib/pngminim/*/makefile to generate pnglibconf.h with the + right zlib header files. + Separated CPPFLAGS and CFLAGS in contrib/pngminim/*/makefile + +Version 1.6.3beta07 [June 8, 2013] + Removed a redundant test in png_set_IHDR(). + Added set(CMAKE_CONFIGURATION_TYPES ...) to CMakeLists.txt (Andrew Hundt) + Deleted set(CMAKE_BUILD_TYPE) block from CMakeLists.txt + Enclose the prototypes for the simplified write API in + #ifdef PNG_STDIO_SUPPORTED/#endif + Make ARM NEON support work at compile time (not just configure time). + This moves the test on __ARM_NEON__ into pngconf.h to avoid issues when + using a compiler that compiles for multiple architectures at one time. + Removed PNG_FILTER_OPTIMIZATIONS and PNG_ARM_NEON_SUPPORTED from + pnglibconf.h, allowing more of the decisions to be made internally + (pngpriv.h) during the compile. Without this, symbol prefixing is broken + under certain circumstances on ARM platforms. Now only the API parts of + the optimizations ('check' vs 'api') are exposed in the public header files + except that the new setting PNG_ARM_NEON_OPT documents how libpng makes the + decision about whether or not to use the optimizations. + Protect symbol prefixing against CC/CPPFLAGS/CFLAGS useage. + Previous iOS/Xcode fixes for the ARM NEON optimizations moved the test + on __ARM_NEON__ from configure time to compile time. This breaks symbol + prefixing because the definition of the special png_init_filter_functions + call was hidden at configure time if the relevant compiler arguments are + passed in CFLAGS as opposed to CC. This change attempts to avoid all + the confusion that would result by declaring the init function even when + it is not used, so that it will always get prefixed. + +Version 1.6.3beta08 [June 18, 2013] + Revised libpng.3 so that "doclifter" can process it. + +Version 1.6.3beta09 [June 27, 2013] + Revised example.c to illustrate use of PNG_DEFAULT_sRGB and PNG_GAMMA_MAC_18 + as parameters for png_set_gamma(). These have been available since + libpng-1.5.4. + Renamed contrib/tools/png-fix-too-far-back.c to pngfix.c and revised it + to check all compressed chunks known to libpng. + +Version 1.6.3beta10 [July 5, 2013] + Updated documentation to show default behavior of benign errors correctly. + Only compile ARM code when PNG_READ_SUPPORTED is defined. + Fixed undefined behavior in contrib/tools/pngfix.c and added new strip + option. pngfix relied on undefined behavior and even a simple change from + gcc to g++ caused it to fail. The new strip option 'unsafe' has been + implemented and is the default if --max is given. Option names have + been clarified, with --strip=transform now stripping the bKGD chunk, + which was stripped previously with --strip=unused. + Added all documented chunk types to pngpriv.h + Unified pngfix.c source with libpng17. + +Version 1.6.3rc01 [July 11, 2013] + No changes. + +Version 1.6.3 [July 18, 2013] + Revised manual about changes in iTXt chunk handling made in libpng-1.6.0. + Added "/* SAFE */" comments in pngrutil.c and pngrtran.c where warnings + may be erroneously issued by code-checking applications. + +Version 1.6.4beta01 [August 21, 2013] + Added information about png_set_options() to the manual. + Delay calling png_init_filter_functions() until a row with nonzero filter + is found. + +Version 1.6.4beta02 [August 30, 2013] + Fixed inconsistent conditional compilation of png_chunk_unknown_handling() + prototype, definition, and usage. Made it depend on + PNG_HANDLE_AS_UNKNOWN_SUPPORTED everywhere. + +Version 1.6.4rc01 [September 5, 2013] + No changes. + +Version 1.6.4 [September 12, 2013] + No changes. + +Version 1.6.5 [September 14, 2013] + Removed two stray lines of code from arm/arm_init.c. + +Version 1.6.6 [September 16, 2013] + Removed two stray lines of code from arm/arm_init.c, again. + +Version 1.6.7beta01 [September 30, 2013] + Revised unknown chunk code to correct several bugs in the NO_SAVE_/NO_WRITE + combination + Allow HANDLE_AS_UNKNOWN to work when other options are configured off. Also + fixed the pngminim makefiles to work when $(MAKEFLAGS) contains stuff + which terminates the make options (as by default in recent versions of + Gentoo). + Avoid up-cast warnings in pngvalid.c. On ARM the alignment requirements of + png_modifier are greater than that of png_store and as a consequence + compilation of pngvalid.c results in a warning about increased alignment + requirements because of the bare cast to (png_modifier*). The code is safe, + because the pointer is known to point to a stack allocated png_modifier, + but this change avoids the warning. + Fixed default behavior of ARM_NEON_API. If the ARM NEON API option was + compiled without the CHECK option it defaulted to on, not off. + Check user callback behavior in pngunknown.c. Previous versions compiled + if SAVE_UNKNOWN was not available but did nothing since the callback + was never implemented. + Merged pngunknown.c with 1.7 version and back ported 1.7 improvements/fixes + +Version 1.6.7beta02 [October 12, 2013] + Made changes for compatibility with automake 1.14: + 1) Added the 'compile' program to the list of programs that must be cleaned + in autogen.sh + 2) Added 'subdir-objects' which causes .c files in sub-directories to be + compiled such that the corresponding .o files are also in the + sub-directory. This is because automake 1.14 warns that the + current behavior of compiling to the top level directory may be removed + in the future. + 3) Updated dependencies on pnglibconf.h to match the new .o locations and + added all the files in contrib/libtests and contrib/tools that depend + on pnglibconf.h + 4) Added 'BUILD_SOURCES = pnglibconf.h'; this is the automake recommended + way of handling the dependencies of sources that are machine generated; + unfortunately it only works if the user does 'make all' or 'make check', + so the dependencies (3) are still required. + Cleaned up (char*) casts of zlib messages. The latest version of the Intel C + compiler complains about casting a string literal as (char*), so copied the + treatment of z_const from the library code into pngfix.c + Simplified error message code in pngunknown. The simplification has the + useful side effect of avoiding a bogus warning generated by the latest + version of the Intel C compiler (it objects to + condition ? string-literal : string-literal). + Make autogen.sh work with automake 1.13 as well as 1.14. Do this by always + removing the 1.14 'compile' script but never checking for it. + +Version 1.6.7beta03 [October 19, 2013] + Added ARMv8 support (James Yu ). Added file + arm/filter_neon_intrinsics.c; enable with -mfpu=neon. + Revised pngvalid to generate size images with as many filters as it can + manage, limited by the number of rows. + Cleaned up ARM NEON compilation handling. The tests are now in pngpriv.h + and detect the broken GCC compilers. + +Version 1.6.7beta04 [October 26, 2013] + Allow clang derived from older GCC versions to use ARM intrinsics. This + causes all clang builds that use -mfpu=neon to use the intrinsics code, + not the assembler code. This has only been tested on iOS 7. It may be + necessary to exclude some earlier clang versions but this seems unlikely. + Changed NEON implementation selection mechanism. This allows assembler + or intrinsics to be turned on at compile time during the build by defining + PNG_ARM_NEON_IMPLEMENTATION to the correct value (2 or 1). This macro + is undefined by default and the build type is selected in pngpriv.h. + +Version 1.6.7rc01 [November 2, 2013] + No changes. + +Version 1.6.7rc02 [November 7, 2013] + Fixed #include in filter_neon_intrinsics.c and ctype macros. The ctype char + checking macros take an unsigned char argument, not a signed char. + +Version 1.6.7 [November 14, 2013] + No changes. + +Version 1.6.8beta01 [November 24, 2013] + Moved prototype for png_handle_unknown() in pngpriv.h outside of + the #ifdef PNG_SET_UNKNOWN_CHUNKS_SUPPORTED/#endif block. + Added "-Wall" to CFLAGS in contrib/pngminim/*/makefile + Conditionally compile some unused functions reported by -Wall in + pngminim. + Fixed 'minimal' builds. Various obviously useful minimal configurations + don't build because of missing contrib/libtests test programs and + overly complex dependencies in scripts/pnglibconf.dfa. This change + adds contrib/conftest/*.dfa files that can be used in automatic build + scripts to ensure that these configurations continue to build. + Enabled WRITE_INVERT and WRITE_PACK in contrib/pngminim/encoder. + Fixed pngvalid 'fail' function declaration on the Intel C Compiler. + This reverts to the previous 'static' implementation and works round + the 'unused static function' warning by using PNG_UNUSED(). + +Version 1.6.8beta02 [November 30, 2013] + Removed or marked PNG_UNUSED some harmless "dead assignments" reported + by clang scan-build. + Changed tabs to 3 spaces in png_debug macros and changed '"%s"m' + to '"%s" m' to improve portability among compilers. + Changed png_free_default() to free() in pngtest.c + +Version 1.6.8rc01 [December 12, 2013] + Tidied up pngfix inits and fixed pngtest no-write builds. + +Version 1.6.8rc02 [December 14, 2013] + Handle zero-length PLTE chunk or NULL palette with png_error() + instead of png_chunk_report(), which by default issues a warning + rather than an error, leading to later reading from a NULL pointer + (png_ptr->palette) in png_do_expand_palette(). This is CVE-2013-6954 + and VU#650142. Libpng-1.6.1 through 1.6.7 are vulnerable. + Libpng-1.6.0 and earlier do not have this bug. + +Version 1.6.8 [December 19, 2013] + No changes. + +Version 1.6.9beta01 [December 26, 2013] + Bookkeeping: Moved functions around (no changes). Moved transform + function definitions before the place where they are called so that + they can be made static. Move the intrapixel functions and the + grayscale palette builder out of the png?tran.c files. The latter + isn't a transform function and is no longer used internally, and the + former MNG specific functions are better placed in pngread/pngwrite.c + Made transform implementation functions static. This makes the internal + functions called by png_do_{read|write}_transformations static. On an + x86-64 DLL build (Gentoo Linux) this reduces the size of the text + segment of the DLL by 1208 bytes, about 0.6%. It also simplifies + maintenance by removing the declarations from pngpriv.h and allowing + easier changes to the internal interfaces. + Rebuilt configure scripts with automake-1.14.1 and autoconf-2.69 + in the tar distributions. + +Version 1.6.9beta02 [January 1, 2014] + Added checks for libpng 1.5 to pngvalid.c. This supports the use of + this version of pngvalid in libpng 1.5 + Merged with pngvalid.c from libpng-1.7 changes to create a single + pngvalid.c + Removed #error macro from contrib/tools/pngfix.c (Thomas Klausner). + Merged pngrio.c, pngtrans.c, pngwio.c, and pngerror.c with libpng-1.7.0 + Merged libpng-1.7.0 changes to make no-interlace configurations work + with test programs. + Revised pngvalid.c to support libpng 1.5, which does not support the + PNG_MAXIMUM_INFLATE_WINDOW option, so #define it out when appropriate in + pngvalid.c + Allow unversioned links created on install to be disabled in configure. + In configure builds 'make install' changes/adds links like png.h + and libpng.a to point to the newly installed, versioned, files (e.g. + libpng17/png.h and libpng17.a). Three new configure options and some + rearrangement of Makefile.am allow creation of these links to be disabled. + +Version 1.6.9beta03 [January 10, 2014] + Removed potentially misleading warning from png_check_IHDR(). + +Version 1.6.9beta04 [January 20, 2014] + Updated scripts/makefile.* to use CPPFLAGS (Cosmin). + Added clang attribute support (Cosmin). + +Version 1.6.9rc01 [January 28, 2014] + No changes. + +Version 1.6.9rc02 [January 30, 2014] + Quiet an uninitialized memory warning from VC2013 in png_get_png(). + +Version 1.6.9 [February 6, 2014] + +Version 1.6.10beta01 [February 9, 2014] + Backported changes from libpng-1.7.0beta30 and beta31: + Fixed a large number of instances where PNGCBAPI was omitted from + function definitions. + Added pngimage test program for png_read_png() and png_write_png() + with two new test scripts. + Removed dependence on !PNG_READ_EXPAND_SUPPORTED for calling + png_set_packing() in png_read_png(). + Fixed combination of ~alpha with shift. On read invert alpha, processing + occurred after shift processing, which causes the final values to be + outside the range that should be produced by the shift. Reversing the + order on read makes the two transforms work together correctly and mirrors + the order used on write. + Do not read invalid sBIT chunks. Previously libpng only checked sBIT + values on write, so a malicious PNG writer could therefore cause + the read code to return an invalid sBIT chunk, which might lead to + application errors or crashes. Such chunks are now skipped (with + chunk_benign_error). + Make png_read_png() and png_write_png() prototypes in png.h depend + upon PNG_READ_SUPPORTED and PNG_WRITE_SUPPORTED. + Support builds with unsupported PNG_TRANSFORM_* values. All of the + PNG_TRANSFORM_* values are always defined in png.h and, because they + are used for both read and write in some cases, it is not reliable + to #if out ones that are totally unsupported. This change adds error + detection in png_read_image() and png_write_image() to do a + png_app_error() if the app requests something that cannot be done + and it adds corresponding code to pngimage.c to handle such options + by not attempting to test them. + +Version 1.6.10beta02 [February 23, 2014] + Moved redefines of png_error(), png_warning(), png_chunk_error(), + and png_chunk_warning() from pngpriv.h to png.h to make them visible + to libpng-calling applications. + Moved OS dependent code from arm/arm_init.c, to allow the included + implementation of the ARM NEON discovery function to be set at + build-time and provide sample implementations from the current code in the + contrib/arm-neon subdirectory. The __linux__ code has also been changed to + compile and link on Android by using /proc/cpuinfo, and the old linux code + is in contrib/arm-neon/linux-auxv.c. The new code avoids POSIX and Linux + dependencies apart from opening /proc/cpuinfo and is C90 compliant. + Check for info_ptr == NULL early in png_read_end() so we don't need to + run all the png_handle_*() and depend on them to return if info_ptr == NULL. + This improves the performance of png_read_end(png_ptr, NULL) and makes + it more robust against future programming errors. + Check for __has_extension before using it in pngconf.h, to + support older Clang versions (Jeremy Sequoia). + Treat CRC error handling with png_set_crc_action(), instead of with + png_set_benign_errors(), which has been the case since libpng-1.6.0beta18. + Use a user warning handler in contrib/gregbook/readpng2.c instead of default, + so warnings will be put on stderr even if libpng has CONSOLE_IO disabled. + Added png_ptr->process_mode = PNG_READ_IDAT_MODE in png_push_read_chunk + after recognizing the IDAT chunk, which avoids an infinite loop while + reading a datastream whose first IDAT chunk is of zero-length. + This fixes CERT VU#684412 and CVE-2014-0333. + Don't recognize known sRGB profiles as sRGB if they have been hacked, + but don't reject them and don't issue a copyright violation warning. + +Version 1.6.10beta03 [February 25, 2014] + Moved some documentation from png.h to libpng.3 and libpng-manual.txt + Minor editing of contrib/arm-neon/README and contrib/examples/*.c + +Version 1.6.10rc01 [February 27, 2014] + Fixed typos in the manual and in scripts/pnglibconf.dfa (CFLAGS -> CPPFLAGS + and PNG_USR_CONFIG -> PNG_USER_CONFIG). + +Version 1.6.10rc02 [February 28, 2014] + Removed unreachable return statement after png_chunk_error() + in pngrutil.c + +Version 1.6.10rc03 [March 4, 2014] + Un-deprecated png_data_freer(). + +Version 1.6.10 [March 6, 2014] + No changes. + +Version 1.6.11beta01 [March 17, 2014] + Use "if (value != 0)" instead of "if (value)" consistently. + Changed ZlibSrcDir from 1.2.5 to 1.2.8 in projects/vstudio. + Moved configuration information from the manual to the INSTALL file. + +Version 1.6.11beta02 [April 6, 2014] + Removed #if/#else/#endif from inside two pow() calls in pngvalid.c because + they were handled improperly by Portland Group's PGI-14.1 - PGI-14.3 + when using its "__builtin_pow()" function. + Silence 'unused parameter' build warnings (Cosmin Truta). + $(CP) is now used alongside $(RM_F). Also, use 'copy' instead of 'cp' + where applicable, and applied other minor makefile changes (Cosmin). + Don't warn about invalid dimensions exceeding user limits (Cosmin). + Allow an easy replacement of the default pre-built configuration + header with a custom header, via the make PNGLIBCONF_H_PREBUILT + macro (Cosmin). + +Version 1.6.11beta03 [April 6, 2014] + Fixed a typo in pngrutil.c, introduced in libpng-1.5.6, that interferes + with "blocky" expansion of sub-8-bit interlaced PNG files (Eric Huss). + Optionally use __builtin_bswap16() in png_do_swap(). + +Version 1.6.11beta04 [April 19, 2014] + Made progressive reading of interlaced images consistent with the + behavior of the sequential reader and consistent with the manual, by + moving some code out of the PNG_READ_INTERLACING_SUPPORTED blocks. The + row_callback now receives the proper pass number and unexpanded rows, when + png_combine_row() isn't built or used, and png_set_interlace_handling() + is not called. + Allow PNG_sRGB_PROFILE_CHECKING = (-1) to mean no sRGB profile checking. + +Version 1.6.11beta05 [April 26, 2014] + Do not reject ICC V2 profiles that lack padding (Kai-Uwe Behrmann). + Relocated closing bracket of the sRGB profile test loop to avoid getting + "Not recognizing known sRGB profile that has been edited" warning for + ICC V2 profiles that lack the MD5 signature in the profile header. + +Version 1.6.11beta06 [May 19, 2014] + Added PNG_SKIP_sRGB_CHECK_PROFILE choice for png_set_option(). + +Version 1.6.11rc01 [May 27, 2014] + No changes. + +Version 1.6.11rc02 [June 3, 2014] + Test ZLIB_VERNUM instead of PNG_ZLIB_VERNUM in contrib/tools/pngfix.c + +Version 1.6.11 [June 5, 2014] + No changes. + +Version 1.6.12rc01 [June 6, 2014] + Relocated new code from 1.6.11beta06 in png.c to a point after the + declarations (Max Stepin). + +Version 1.6.12rc02 [June 7, 2014] + Changed file permissions of contrib/tools/intgamma.sh, + test-driver, and compile from 0644 to 0755 (Cosmin). + +Version 1.6.12rc03 [June 8, 2014] + Ensure "__has_attribute()" macro exists before trying to use it with + old clang compilers (MacPorts Ticket #43939). + +Version 1.6.12 [June 12, 2014] + No changes. + +Version 1.6.13beta01 [July 4, 2014] + Quieted -Wsign-compare and -Wclobber compiler warnings in + contrib/pngminus/*.c + Added "(void) png_ptr;" where needed in contrib/gregbook to quiet + compiler complaints about unused pointers. + Split a long output string in contrib/gregbook/rpng2-x.c. + Added "PNG_SET_OPTION" requirement for sRGB chunk support to pnglibconf.dfa, + Needed for write-only support (John Bowler). + Changed "if defined(__ARM_NEON__)" to + "if (defined(__ARM_NEON__) || defined(__ARM_NEON))" (James Wu). + Fixed clang no-warning builds: png_digit was defined but never used. + +Version 1.6.13beta02 [July 21, 2014] + Fixed an incorrect separator ("/" should be "\") in scripts/makefile.vcwin32 + (bug report from Wolfgang S. Kechel). Bug was introduced in libpng-1.6.11. + Also fixed makefile.bc32, makefile.bor, makefile.msc, makefile.intel, and + makefile.tc3 similarly. + +Version 1.6.13beta03 [August 3, 2014] + Removed scripts/makefile.elf. It has not worked since libpng-1.5.0beta14 + due to elimination of the PNG_FUNCTION_EXPORT and PNG_DATA_EXPORT + definitions from pngconf.h. + Ensure that CMakeLists.txt makes the target "lib" directory before making + symbolic link into it (SourceForge bug report #226 by Rolf Timmermans). + +Version 1.6.13beta04 [August 8, 2014] + Added opinion that the ECCN (Export Control Classification Number) for + libpng is EAR99 to the README file. + Eliminated use of "$<" in makefile explicit rules, when copying + $PNGLIBCONF_H_PREBUILT. This does not work on some versions of make; + bug introduced in libpng version 1.6.11. + +Version 1.6.13rc01 [August 14, 2014] + Made "ccopts" agree with "CFLAGS" in scripts/makefile.hp* and makefile.*sunu + +Version 1.6.13 [August 21, 2014] + No changes. + +Version 1.6.14beta01 [September 14, 2014] + Guard usage of png_ptr->options with #ifdef PNG_SET_OPTION_SUPPORTED. + Do not build contrib/tools/pngfix.c when PNG_SETJMP_NOT_SUPPORTED, + to allow "make" to complete without setjmp support (bug report by + Claudio Fontana) + Add "#include " to contrib/tools/pngfix.c (John Bowler) + +Version 1.6.14beta02 [September 18, 2014] + Use nanosleep() instead of usleep() in contrib/gregbook/rpng2-x.c + because usleep() is deprecated. + Define usleep() in contrib/gregbook/rpng2-x.c if not already defined + in unistd.h and nanosleep() is not available; fixes error introduced + in libpng-1.6.13. + Disable floating point exception handling in pngvalid.c when + PNG_FLOATING_ARITHMETIC is not supported (bug report by "zootus + at users.sourceforge.net"). + +Version 1.6.14beta03 [September 19, 2014] + Define FE_DIVBYZERO, FE_INVALID, and FE_OVERFLOW in pngvalid.c if not + already defined. Revert floating point exception handling in pngvalid.c + to version 1.6.14beta01 behavior. + +Version 1.6.14beta04 [September 27, 2014] + Fixed incorrect handling of the iTXt compression flag in pngrutil.c + (bug report by Shunsaku Hirata). Bug was introduced in libpng-1.6.0. + +Version 1.6.14beta05 [October 1, 2014] + Added "option READ_iCCP enables READ_COMPRESSED_TEXT" to pnglibconf.dfa + +Version 1.6.14beta06 [October 5, 2014] + Removed unused "text_len" parameter from private function png_write_zTXt(). + Conditionally compile some code in png_deflate_claim(), when + PNG_WARNINGS_SUPPORTED and PNG_ERROR_TEXT_SUPPORTED are disabled. + Replaced repeated code in pngpread.c with PNG_PUSH_SAVE_BUFFER_IF_FULL. + Added "chunk iTXt enables TEXT" and "chunk zTXt enables TEXT" + to pnglibconf.dfa. + Removed "option READ_COMPRESSED_TEXT enables READ_TEXT" from pnglibconf.dfa, + to make it possible to configure a libpng that supports iCCP but not TEXT. + +Version 1.6.14beta07 [October 7, 2014] + Removed "option WRITE_COMPRESSED_TEXT enables WRITE_TEXT" from pnglibconf.dfa + Only mark text chunks as written after successfully writing them. + +Version 1.6.14rc01 [October 15, 2014] + Fixed some typos in comments. + +Version 1.6.14rc02 [October 17, 2014] + Changed png_convert_to_rfc_1123() to png_convert_to_rfc_1123_buffer() + in the manual, to reflect the change made in libpng-1.6.0. + Updated README file to explain that direct access to the png_struct + and info_struct members has not been permitted since libpng-1.5.0. + +Version 1.6.14 [October 23, 2014] + No changes. + +Version 1.6.15beta01 [October 29, 2014] + Changed "if (!x)" to "if (x == 0)" and "if (x)" to "if (x != 0)" + Simplified png_free_data(). + Added missing "ptr = NULL" after some instances of png_free(). + +Version 1.6.15beta02 [November 1, 2014] + Changed remaining "if (!x)" to "if (x == 0)" and "if (x)" to "if (x != 0)" + +Version 1.6.15beta03 [November 3, 2014] + Added PNG_USE_ARM_NEON configuration flag (Marcin Juszkiewicz). + +Version 1.6.15beta04 [November 4, 2014] + Removed new PNG_USE_ARM_NEON configuration flag and made a one-line + revision to configure.ac to support ARM on aarch64 instead (John Bowler). + +Version 1.6.15beta05 [November 5, 2014] + Use png_get_libpng_ver(NULL) instead of PNG_LIBPNG_VER_STRING in + example.c, pngtest.c, and applications in the contrib directory. + Avoid out-of-bounds memory access in png_user_version_check(). + Simplified and future-proofed png_user_version_check(). + Fixed GCC unsigned int->float warnings. Various versions of GCC + seem to generate warnings when an unsigned value is implicitly + converted to double. This is probably a GCC bug but this change + avoids the issue by explicitly converting to (int) where safe. + Free all allocated memory in pngimage. The file buffer cache was left + allocated at the end of the program, harmless but it causes memory + leak reports from clang. + Fixed array size calculations to avoid warnings. At various points + in the code the number of elements in an array is calculated using + sizeof. This generates a compile time constant of type (size_t) which + is then typically assigned to an (unsigned int) or (int). Some versions + of GCC on 64-bit systems warn about the apparent narrowing, even though + the same compiler does apparently generate the correct, in-range, + numeric constant. This adds appropriate, safe, casts to make the + warnings go away. + +Version 1.6.15beta06 [November 6, 2014] + Reverted use png_get_libpng_ver(NULL) instead of PNG_LIBPNG_VER_STRING + in the manual, example.c, pngtest.c, and applications in the contrib + directory. It was incorrect advice. + +Version 1.6.15beta07 [November 7, 2014] + Removed #ifdef PNG_16BIT_SUPPORTED/#endif around png_product2(); it is + needed by png_reciprocal2(). + Added #ifdef PNG_16BIT_SUPPORTED/#endif around png_log16bit() and + png_do_swap(). + Changed all "#endif /* PNG_FEATURE_SUPPORTED */" to "#endif /* FEATURE */" + +Version 1.6.15beta08 [November 8, 2014] + More housecleaning in *.h + +Version 1.6.15rc01 [November 13, 2014] + +Version 1.6.15rc02 [November 14, 2014] + The macros passed in the command line to Borland make were ignored if + similarly-named macros were already defined in makefiles. This behavior + is different from POSIX make and other make programs. Surround the + macro definitions with ifndef guards (Cosmin). + +Version 1.6.15rc03 [November 16, 2014] + Added "-D_CRT_SECURE_NO_WARNINGS" to CFLAGS in scripts/makefile.vcwin32. + Removed the obsolete $ARCH variable from scripts/makefile.darwin. + +Version 1.6.15 [November 20, 2014] + No changes. + +Version 1.6.16beta01 [December 14, 2014] + Added ".align 2" to arm/filter_neon.S to support old GAS assemblers that + don't do alignment correctly. + Revised Makefile.am and scripts/symbols.dfn to work with MinGW/MSYS + (Bob Friesenhahn). + +Version 1.6.16beta02 [December 15, 2014] + Revised Makefile.am and scripts/*.dfn again to work with MinGW/MSYS; + renamed scripts/*.dfn to scripts/*.c (John Bowler). + +Version 1.6.16beta03 [December 21, 2014] + Quiet a "comparison always true" warning in pngstest.c (John Bowler). + +Version 1.6.16rc01 [December 21, 2014] + Restored a test on width that was removed from png.c at libpng-1.6.9 + (Bug report by Alex Eubanks, CVE-2015-0973). + +Version 1.6.16rc02 [December 21, 2014] + Undid the update to pngrutil.c in 1.6.16rc01. + +Version 1.6.16rc03 [December 21, 2014] + Fixed an overflow in png_combine_row() with very wide interlaced images + (Bug report and fix by John Bowler, CVE-2014-9495). + +Version 1.6.16 [December 22, 2014] + No changes. + +Version 1.6.17beta01 [January 29, 2015] + Removed duplicate PNG_SAFE_LIMITS_SUPPORTED handling from pngconf.h + Corrected the width limit calculation in png_check_IHDR(). + Removed user limits from pngfix. Also pass NULL pointers to + png_read_row to skip the unnecessary row de-interlace stuff. + Added testing of png_set_packing() to pngvalid.c + Regenerated configure scripts in the *.tar distributions with libtool-2.4.4 + Implement previously untested cases of libpng transforms in pngvalid.c + Fixed byte order in png_do_read_filler() with 16-bit input. Previously + the high and low bytes of the filler, from png_set_filler() or from + png_set_add_alpha(), were read in the wrong order. + Made the check for out-of-range values in png_set_tRNS() detect + values that are exactly 2^bit_depth, and work on 16-bit platforms. + Merged some parts of libpng-1.6.17beta01 and libpng-1.7.0beta47. + Added #ifndef __COVERITY__ where needed in png.c, pngrutil.c and + pngset.c to avoid warnings about dead code. + Added "& 0xff" to many instances of expressions that are typecast + to (png_byte), to avoid Coverity warnings. + +Version 1.6.17beta02 [February 7, 2015] + Work around one more Coverity-scan dead-code warning. + Do not build png_product2() when it is unused. + +Version 1.6.17beta03 [February 17, 2015] + Display user limits in the output from pngtest. + Eliminated the PNG_SAFE_LIMITS macro and restored the 1-million-column + and 1-million-row default limits in pnglibconf.dfa, that can be reset + by the user at build time or run time. This provides a more robust + defense against DOS and as-yet undiscovered overflows. + +Version 1.6.17beta04 [February 21, 2015] + Added PNG_WRITE_CUSTOMIZE_COMPRESSION_SUPPORTED macro, on by default. + Allow user to call png_get_IHDR() with NULL arguments (Reuben Hawkins). + Rebuilt configure scripts with automake-1.15 and libtool-2.4.6 + +Version 1.6.17beta05 [February 25, 2015] + Restored compiling of png_reciprocal2 with PNG_NO_16BIT. + +Version 1.6.17beta06 [February 27, 2015] + Moved png_set_filter() prototype into a PNG_WRITE_SUPPORTED block + of png.h. + Avoid runtime checks when converting integer to png_byte with + Visual Studio (Sergey Kosarevsky) + +Version 1.6.17rc01 [March 4, 2015] + No changes. + +Version 1.6.17rc02 [March 9, 2015] + Removed some comments that the configure script did not handle + properly from scripts/pnglibconf.dfa and pnglibconf.h.prebuilt. + Free the unknown_chunks structure even when it contains no data. + +Version 1.6.17rc03 [March 12, 2015] + Updated CMakeLists.txt to add OSX framework, change YES/NO to ON/OFF + for consistency, and remove some useless tests (Alexey Petruchik). + +Version 1.6.17rc04 [March 16, 2015] + Remove pnglibconf.h, pnglibconf.c, and pnglibconf.out instead of + pnglibconf.* in "make clean" (Cosmin). + Fix bug in calculation of maxbits, in png_write_sBIT, introduced + in libpng-1.6.17beta01 (John Bowler). + +Version 1.6.17rc05 [March 21, 2015] + Define PNG_FILTER_* and PNG_FILTER_VALUE_* in png.h even when WRITE + is not supported (John Bowler). This fixes an error introduced in + libpng-1.6.17beta06. + Reverted "& 0xff" additions of version 1.6.17beta01. Libpng passes + the Coverity scan without them. + +Version 1.6.17rc06 [March 23, 2015] + Remove pnglibconf.dfn and pnglibconf.pre with "make clean". + Reformatted some "&0xff" instances to "& 0xff". + Fixed simplified 8-bit-linear to sRGB alpha. The calculated alpha + value was wrong. It's not clear if this affected the final stored + value; in the obvious code path the upper and lower 8-bits of the + alpha value were identical and the alpha was truncated to 8-bits + rather than dividing by 257 (John Bowler). + +Version 1.6.17 [March 26, 2015] + No changes. + +Version 1.6.18beta01 [April 1, 2015] + Removed PNG_SET_CHUNK_[CACHE|MALLOC]_LIMIT_SUPPORTED macros. They + have been combined with PNG_SET_USER_LIMITS_SUPPORTED (resolves + bug report by Andrew Church). + Fixed rgb_to_gray checks and added tRNS checks to pngvalid.c. This + fixes some arithmetic errors that caused some tests to fail on + some 32-bit platforms (Bug reports by Peter Breitenlohner [i686] + and Petr Gajdos [i586]). + +Version 1.6.18beta02 [April 26, 2015] + Suppressed some warnings from the Borland C++ 5.5.1/5.82 compiler + (Bug report by Viktor Szakats). + +Version 1.6.18beta03 [May 6, 2015] + Replaced "unexpected" with an integer (0xabadca11) in pngset.c + where a long was expected, to avoid a compiler warning when PNG_DEBUG > 1. + Added contrib/examples/simpleover.c, to demonstrate how to handle + alpha compositing of multiple images, using the "simplified API" + and an example PNG generation tool, contrib/examples/genpng.c + (John Bowler). + +Version 1.6.18beta04 [May 20, 2015] + PNG_RELEASE_BUILD replaces tests where the code depended on the build base + type and can be defined on the command line, allowing testing in beta + builds (John Bowler). + Avoid Coverity issue 80858 (REVERSE NULL) in pngtest.c PNG_DEBUG builds. + Avoid a harmless potential integer overflow in png_XYZ_from_xy() (Bug + report from Christopher Ferris). + +Version 1.6.18beta05 [May 31, 2015] + Backport filter selection code from libpng-1.7.0beta51, to combine + sub_row, up_row, avg_row, and paeth_row into try_row and tst_row. + Changed png_voidcast(), etc., to voidcast(), etc., in contrib/tools/pngfix.c + to avoid confusion with the libpng private macros. + Fixed old cut&paste bug in the weighted filter selection code in + pngwutil.c, introduced in libpng-0.95, March 1997. + +Version 1.6.18beta06 [June 1, 2015] + Removed WRITE_WEIGHTED_FILTERED code, to save a few kbytes of the + compiled library size. It never worked properly and as far as we can + tell, no one uses it. The png_set_filter_heuristics() and + png_set_filter_heuristics_fixed() APIs are retained but deprecated + and do nothing. + +Version 1.6.18beta07 [June 6, 2015] + Removed non-working progressive reader 'skip' function. This + function has apparently never been used. It was implemented + to support back-door modification of png_struct in libpng-1.4.x + but (because it does nothing and cannot do anything) was apparently + never tested (John Bowler). + Fixed cexcept.h in which GCC 5 now reports that one of the auto + variables in the Try macro needs to be volatile to prevent value + being lost over the setjmp (John Bowler). + Fixed NO_WRITE_FILTER and -Wconversion build breaks (John Bowler). + Fix g++ build breaks (John Bowler). + Quieted some Coverity issues in pngfix.c, png-fix-itxt.c, pngvalid.c, + pngstest.c, and pngimage.c. Most seem harmless, but png-fix-itxt + would only work with iTXt chunks with length 255 or less. + Added #ifdef's to contrib/examples programs so people don't try + to compile them without the minimum required support enabled + (suggested by Flavio Medeiros). + +Version 1.6.18beta08 [June 30, 2015] + Eliminated the final two Coverity defects (insecure temporary file + handling in contrib/libtests/pngstest.c; possible overflow of + unsigned char in contrib/tools/png-fix-itxt.c). To use the "secure" + file handling, define PNG_USE_MKSTEMP, otherwise "tmpfile()" will + be used. + Removed some unused WEIGHTED_FILTER macros from png.h and pngstruct.h + +Version 1.6.18beta09 [July 5, 2015] + Removed some useless typecasts from contrib/tools/png-fix-itxt.c + Fixed a new signed-unsigned comparison in pngrtran.c (Max Stepin). + Replaced arbitrary use of 'extern' with #define PNG_LINKAGE_*. To + preserve API compatibility, the new defines all default to "extern" + (requested by Jan Nijtmans). + +Version 1.6.18rc01 [July 9, 2015] + Belatedly added Mans Rullgard and James Yu to the list of Contributing + Authors. + +Version 1.6.18rc02 [July 12, 2015] + Restored unused FILTER_HEURISTIC macros removed at libpng-1.6.18beta08 + to png.h to avoid compatibility warnings. + +Version 1.6.18rc03 [July 15, 2015] + Minor changes to the man page + +Version 1.6.18 [July 23, 2015] + No changes. + +Version 1.6.19beta01 [July 30, 2015] + Updated obsolete information about the simplified API macros in the + manual pages (Bug report by Arc Riley). + Avoid potentially dereferencing NULL info_ptr in png_info_init_3(). + Rearranged png.h to put the major sections in the same order as + in libpng17. + Eliminated unused PNG_COST_SHIFT, PNG_WEIGHT_SHIFT, PNG_COST_FACTOR, and + PNG_WEIGHT_FACTOR macros. + Suppressed some warnings from the Borland C++ 5.5.1/5.82 compiler + (Bug report by Viktor Szakats). Several warnings remain and are + unavoidable, where we test for overflow. + Fixed potential leak of png_pixels in contrib/pngminus/pnm2png.c + Fixed uninitialized variable in contrib/gregbook/rpng2-x.c + +Version 1.6.19beta02 [August 19, 2015] + Moved config.h.in~ from the "libpng_autotools_files" list to the + "libpng_autotools_extra" list in autogen.sh because it was causing a + false positive for missing files (bug report by Robert C. Seacord). + Removed unreachable "break" statements in png.c, pngread.c, and pngrtran.c + to suppress clang warnings (Bug report by Viktor Szakats). + Fixed some bad links in the man page. + Changed "n bit" to "n-bit" in comments. + Added signed/unsigned 16-bit safety net. This removes the dubious + 0x8000 flag definitions on 16-bit systems. They aren't supported + yet the defs *probably* work, however it seems much safer to do this + and be advised if anyone, contrary to advice, is building libpng 1.6 + on a 16-bit system. It also adds back various switch default clauses + for GCC; GCC errors out if they are not present (with an appropriately + high level of warnings). + Safely convert num_bytes to a png_byte in png_set_sig_bytes() (Robert + Seacord). + Fixed the recently reported 1's complement security issue by replacing + the value that is illegal in the PNG spec, in both signed and unsigned + values, with 0. Illegal unsigned values (anything greater than or equal + to 0x80000000) can still pass through, but since these are not illegal + in ANSI-C (unlike 0x80000000 in the signed case) the checking that + occurs later can catch them (John Bowler). + +Version 1.6.19beta03 [September 26, 2015] + Fixed png_save_int_32 when int is not 2's complement (John Bowler). + Updated libpng16 with all the recent test changes from libpng17, + including changes to pngvalid.c to ensure that the original, + distributed, version of contrib/visupng/cexcept.h can be used + (John Bowler). + pngvalid contains the correction to the use of SAVE/STORE_ + UNKNOWN_CHUNKS; a bug revealed by changes in libpng 1.7. More + tests contain the --strict option to detect warnings and the + pngvalid-standard test has been corrected so that it does not + turn on progressive-read. There is a separate test which does + that. (John Bowler) + Also made some signed/unsigned fixes. + Make pngstest error limits version specific. Splitting the machine + generated error structs out to a file allows the values to be updated + without changing pngstest.c itself. Since libpng 1.6 and 1.7 have + slightly different error limits this simplifies maintenance. The + makepngs.sh script has also been updated to more accurately reflect + current problems in libpng 1.7 (John Bowler). + Incorporated new test PNG files into make check. tests/pngstest-* + are changed so that the new test files are divided into 8 groups by + gamma and alpha channel. These tests have considerably better code + and pixel-value coverage than contrib/pngsuite; however,coverage is + still incomplete (John Bowler). + Removed the '--strict' in 1.6 because of the double-gamma-correction + warning, updated pngstest-errors.h for the errors detected with the + new contrib/testspngs PNG test files (John Bowler). + +Version 1.6.19beta04 [October 15, 2015] + Worked around rgb-to-gray issues in libpng 1.6. The previous + attempts to ignore the errors in the code aren't quite enough to + deal with the 'channel selection' encoding added to libpng 1.7; abort. + pngvalid.c is changed to drop this encoding in prior versions. + Fixed 'pow' macros in pngvalid.c. It is legal for 'pow' to be a + macro, therefore the argument list cannot contain preprocessing + directives. Make sure pow is a function where this happens. This is + a minimal safe fix, the issue only arises in non-performance-critical + code (bug report by Curtis Leach, fix by John Bowler). + Added sPLT support to pngtest.c + +Version 1.6.19rc01 [October 23, 2015] + No changes. + +Version 1.6.19rc02 [October 31, 2015] + Prevent setting or writing over-length PLTE chunk (Cosmin Truta). + Silently truncate over-length PLTE chunk while reading. + Libpng incorrectly calculated the output rowbytes when the application + decreased either the number of channels or the bit depth (or both) in + a user transform. This was safe; libpng overallocated buffer space + (potentially by quite a lot; up to 4 times the amount required) but, + from 1.5.4 on, resulted in a png_error (John Bowler). + +Version 1.6.19rc03 [November 3, 2015] + Fixed some inconsequential cut-and-paste typos in png_set_cHRM_XYZ_fixed(). + Clarified COPYRIGHT information to state explicitly that versions + are derived from previous versions. + Removed much of the long list of previous versions from png.h and + libpng.3. + +Version 1.6.19rc04 [November 5, 2015] + Fixed new bug with CRC error after reading an over-length palette + (bug report by Cosmin Truta) (CVE-2015-8126). + +Version 1.6.19 [November 12, 2015] + Cleaned up coding style in png_handle_PLTE(). + +Version 1.6.20beta01 [November 20, 2015] + Avoid potential pointer overflow/underflow in png_handle_sPLT() and + png_handle_pCAL() (Bug report by John Regehr). + +Version 1.6.20beta02 [November 23, 2015] + Fixed incorrect implementation of png_set_PLTE() that uses png_ptr + not info_ptr, that left png_set_PLTE() open to the CVE-2015-8126 + vulnerability. Fixes CVE-2015-8472. + +Version 1.6.20beta03 [November 24, 2015] + Backported tests from libpng-1.7.0beta69. + +Version 1.6.20rc01 [November 26, 2015] + Fixed an error in handling of bad zlib CMINFO field in pngfix, found by + American Fuzzy Lop, reported by Brian Carpenter. inflate() doesn't + immediately fault a bad CMINFO field; instead a 'too far back' error + happens later (at least some times). pngfix failed to limit CMINFO to + the allowed values but then assumed that window_bits was in range, + triggering an assert. The bug is mostly harmless; the PNG file cannot + be fixed. + +Version 1.6.20rc02 [November 29, 2015] + In libpng 1.6 zlib initialization was changed to use the window size + in the zlib stream, not a fixed value. This causes some invalid images, + where CINFO is too large, to display 'correctly' if the rest of the + data is valid. This provides a workaround for zlib versions where the + error arises (ones that support the API change to use the window size + in the stream). + +Version 1.6.20 [December 3, 2015] + No changes. + +Version 1.6.21beta01 [December 11, 2015] + Fixed syntax "$(command)" in tests/pngstest that some shells other than + bash could not parse (Bug report by Nelson Beebe). Use `command` instead. + +Version 1.6.21beta02 [December 14, 2015] + Moved png_check_keyword() from pngwutil.c to pngset.c + Removed LE/BE dependencies in pngvalid, to 'fix' the current problem + in the BigEndian tests by not testing it, making the BE code the same + as the LE version. + Fixes to pngvalid for various reduced build configurations (eliminate unused + statics) and a fix for the case in rgb_to_gray when the digitize option + reduces graylo to 0, producing a large error. + +Version 1.6.21beta03 [December 18, 2015] + Widened the 'limit' check on the internally calculated error limits in + the 'DIGITIZE' case (the code used prior to 1.7 for rgb_to_gray error + checks) and changed the check to only operate in non-release builds + (base build type not RC or RELEASE.) + Fixed undefined behavior in pngvalid.c, undefined because + (png_byte) << shift is undefined if it changes the signed bit + (because png_byte is promoted to int). The libpng exported functions + png_get_uint_32 and png_get_uint_16 handle this. (Bug reported by + David Drysdale as a result of reports from UBSAN in clang 3.8). + This changes pngvalid to use BE random numbers; this used to produce + errors but these should not be fixed as a result of the previous changes. + +Version 1.6.21rc01 [January 4, 2016] + In projects/vstudio, combined readme.txt and WARNING into README.txt + +Version 1.6.21rc02 [January 7, 2016] + Relocated assert() in contrib/tools/pngfix.c, bug found by American + Fuzzy Lop, reported by Brian Carpenter. + Marked 'limit' UNUSED in transform_range_check(). This only affects + release builds. + +Version 1.6.21 [January 15, 2016] + Worked around a false-positive Coverity issue in pngvalid.c. + +Send comments/corrections/commendations to png-mng-implement at lists.sf.net +(subscription required; visit +https://lists.sourceforge.net/lists/listinfo/png-mng-implement +to subscribe) +or to glennrp at users.sourceforge.net + +Glenn R-P +#endif diff --git a/compat/libpng/CMakeLists.txt b/compat/libpng/CMakeLists.txt new file mode 100755 index 0000000..077e126 --- /dev/null +++ b/compat/libpng/CMakeLists.txt @@ -0,0 +1,374 @@ +# CMakeLists.txt + +# Copyright (C) 2007-2015 Glenn Randers-Pehrson + +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h + +cmake_minimum_required(VERSION 2.4.4) +set(CMAKE_ALLOW_LOOSE_LOOP_CONSTRUCTS true) + +set(CMAKE_CONFIGURATION_TYPES "Release;Debug;MinSizeRel;RelWithDebInfo") + +project(libpng C) +enable_testing() + +set(PNGLIB_MAJOR 1) +set(PNGLIB_MINOR 6) +set(PNGLIB_RELEASE 21) +set(PNGLIB_NAME libpng${PNGLIB_MAJOR}${PNGLIB_MINOR}) +set(PNGLIB_VERSION ${PNGLIB_MAJOR}.${PNGLIB_MINOR}.${PNGLIB_RELEASE}) + +# needed packages +find_package(ZLIB REQUIRED) +include_directories(${ZLIB_INCLUDE_DIR}) + +if(NOT WIN32) + find_library(M_LIBRARY + NAMES m + PATHS /usr/lib /usr/local/lib + ) + if(NOT M_LIBRARY) + message(STATUS "math lib 'libm' not found; floating point support disabled") + endif() +else() + # not needed on windows + set(M_LIBRARY "") +endif() + +# COMMAND LINE OPTIONS +option(PNG_SHARED "Build shared lib" ON) +option(PNG_STATIC "Build static lib" ON) +option(PNG_TESTS "Build libpng tests" ON) + +# Many more configuration options could be added here +option(PNG_FRAMEWORK "Build OS X framework" OFF) +option(PNG_DEBUG "Build with debug output" OFF) +option(PNGARG "Disable ANSI-C prototypes" OFF) + +# SET LIBNAME +set(PNG_LIB_NAME png${PNGLIB_MAJOR}${PNGLIB_MINOR}) + +# to distinguish between debug and release lib +set(CMAKE_DEBUG_POSTFIX "d") + +# Use the prebuilt pnglibconf.h file from the scripts folder +# TODO: fix this by building with awk; without this no cmake build can be +# configured directly (to do so indirectly use your local awk to build a +# pnglibconf.h in the build directory.) +configure_file(${CMAKE_CURRENT_SOURCE_DIR}/scripts/pnglibconf.h.prebuilt + ${CMAKE_CURRENT_BINARY_DIR}/pnglibconf.h) +include_directories(${CMAKE_CURRENT_BINARY_DIR}) + +# OUR SOURCES +set(libpng_public_hdrs + png.h + pngconf.h + ${CMAKE_CURRENT_BINARY_DIR}/pnglibconf.h +) +set(libpng_sources + ${libpng_public_hdrs} + pngdebug.h + pnginfo.h + pngpriv.h + pngstruct.h + png.c + pngerror.c + pngget.c + pngmem.c + pngpread.c + pngread.c + pngrio.c + pngrtran.c + pngrutil.c + pngset.c + pngtrans.c + pngwio.c + pngwrite.c + pngwtran.c + pngwutil.c +) +set(pngtest_sources + pngtest.c +) +set(pngvalid_sources + contrib/libtests/pngvalid.c +) +set(pngstest_sources + contrib/libtests/pngstest.c +) +# SOME NEEDED DEFINITIONS + +if(MSVC) + add_definitions(-D_CRT_SECURE_NO_DEPRECATE) +endif(MSVC) + +if(PNG_DEBUG) + add_definitions(-DPNG_DEBUG) +endif() + +# NOW BUILD OUR TARGET +include_directories(${CMAKE_CURRENT_SOURCE_DIR} ${ZLIB_INCLUDE_DIR}) + +unset(PNG_LIB_TARGETS) + +if(PNG_SHARED) + add_library(${PNG_LIB_NAME} SHARED ${libpng_sources}) + set(PNG_LIB_TARGETS ${PNG_LIB_NAME}) + if(MSVC) + # msvc does not append 'lib' - do it here to have consistent name + set_target_properties(${PNG_LIB_NAME} PROPERTIES PREFIX "lib") + set_target_properties(${PNG_LIB_NAME} PROPERTIES IMPORT_PREFIX "lib") + endif() + target_link_libraries(${PNG_LIB_NAME} ${ZLIB_LIBRARY} ${M_LIBRARY}) +endif() + +if(PNG_STATIC) + # does not work without changing name + set(PNG_LIB_NAME_STATIC ${PNG_LIB_NAME}_static) + add_library(${PNG_LIB_NAME_STATIC} STATIC ${libpng_sources}) + list(APPEND PNG_LIB_TARGETS ${PNG_LIB_NAME_STATIC}) + if(MSVC) + # msvc does not append 'lib' - do it here to have consistent name + set_target_properties(${PNG_LIB_NAME_STATIC} PROPERTIES PREFIX "lib") + endif() + target_link_libraries(${PNG_LIB_NAME_STATIC} ${ZLIB_LIBRARY} ${M_LIBRARY}) +endif() + +if(PNG_FRAMEWORK) + set(PNG_LIB_NAME_FRAMEWORK ${PNG_LIB_NAME}_framework) + add_library(${PNG_LIB_NAME_FRAMEWORK} SHARED ${libpng_sources}) + list(APPEND PNG_LIB_TARGETS ${PNG_LIB_NAME_FRAMEWORK}) + set_target_properties(${PNG_LIB_NAME_FRAMEWORK} PROPERTIES + FRAMEWORK TRUE + FRAMEWORK_VERSION ${PNGLIB_VERSION} + MACOSX_FRAMEWORK_SHORT_VERSION_STRING ${PNGLIB_MAJOR}.${PNGLIB_MINOR} + MACOSX_FRAMEWORK_BUNDLE_VERSION ${PNGLIB_VERSION} + MACOSX_FRAMEWORK_IDENTIFIER org.libpng.libpng + XCODE_ATTRIBUTE_INSTALL_PATH "@rpath" + PUBLIC_HEADER "${libpng_public_hdrs}" + OUTPUT_NAME png) + target_link_libraries(${PNG_LIB_NAME_FRAMEWORK} ${ZLIB_LIBRARY} ${M_LIBRARY}) +endif() + +if(NOT PNG_LIB_TARGETS) + message(SEND_ERROR + "No library variant selected to build. " + "Please enable at least one of the following options: " + " PNG_STATIC, PNG_SHARED, PNG_FRAMEWORK") +endif() + +if(PNG_SHARED AND WIN32) + set_target_properties(${PNG_LIB_NAME} PROPERTIES DEFINE_SYMBOL PNG_BUILD_DLL) +endif() + +if(PNG_TESTS AND PNG_SHARED) + # does not work with msvc due to png_lib_ver issue + add_executable(pngtest ${pngtest_sources}) + target_link_libraries(pngtest ${PNG_LIB_NAME}) + add_test(pngtest ./pngtest ${CMAKE_CURRENT_SOURCE_DIR}/pngtest.png) + # + add_executable(pngvalid ${pngvalid_sources}) + target_link_libraries(pngvalid ${PNG_LIB_NAME}) + add_test(pngvalid ./pngvalid) + add_executable(pngstest ${pngstest_sources}) + target_link_libraries(pngstest ${PNG_LIB_NAME}) + add_test(pngstest ./pngstest + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/basn0g01.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/basn0g02.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/basn0g04.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/basn0g08.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/basn0g16.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/basn2c08.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/basn2c16.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/basn3p01.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/basn3p02.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/basn3p04.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/basn3p08.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/basn4a08.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/basn4a16.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/basn6a08.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/basn6a16.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/ftbbn0g01.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/ftbbn0g02.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/ftbbn0g04.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/ftbbn2c16.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/ftbbn3p08.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/ftbgn2c16.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/ftbgn3p08.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/ftbrn2c08.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/ftbwn0g16.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/ftbwn3p08.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/ftbyn3p08.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/ftp0n0g08.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/ftp0n2c08.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/ftp0n3p08.png + ${CMAKE_CURRENT_SOURCE_DIR}/contrib/pngsuite/ftp1n3p08.png + ) +endif() + +# Ensure the CMAKE_LIBRARY_OUTPUT_DIRECTORY is set +IF(NOT CMAKE_LIBRARY_OUTPUT_DIRECTORY) + SET(CMAKE_LIBRARY_OUTPUT_DIRECTORY "lib") +ENDIF(NOT CMAKE_LIBRARY_OUTPUT_DIRECTORY) + +# Set a variable with CMake code which: +# Creates a symlink from src to dest (if possible) or alternatively +# copies if different. +macro(CREATE_SYMLINK SRC_FILE DEST_FILE) + FILE(REMOVE ${CMAKE_LIBRARY_OUTPUT_DIRECTORY}/${DEST_FILE}) + if(WIN32 AND NOT CYGWIN AND NOT MSYS) + ADD_CUSTOM_COMMAND( + OUTPUT ${CMAKE_LIBRARY_OUTPUT_DIRECTORY}/${DEST_FILE} ${CMAKE_CURRENT_BINARY_DIR}/${DEST_FILE} + COMMAND ${CMAKE_COMMAND} -E copy_if_different "${SRC_FILE}" ${CMAKE_LIBRARY_OUTPUT_DIRECTORY}/${DEST_FILE} + COMMAND ${CMAKE_COMMAND} -E copy_if_different "${SRC_FILE}" ${CMAKE_CURRENT_BINARY_DIR}/${DEST_FILE} + DEPENDS ${PNG_LIB_TARGETS} + ) + ADD_CUSTOM_TARGET(${DEST_FILE}_COPY ALL DEPENDS ${CMAKE_LIBRARY_OUTPUT_DIRECTORY}/${DEST_FILE}) + else(WIN32 AND NOT CYGWIN AND NOT MSYS) + get_filename_component(LINK_TARGET "${SRC_FILE}" NAME) + execute_process(COMMAND ${CMAKE_COMMAND} -E make_directory ${CMAKE_CURRENT_BINARY_DIR}/${CMAKE_LIBRARY_OUTPUT_DIRECTORY}) + execute_process(COMMAND ${CMAKE_COMMAND} -E create_symlink "${LINK_TARGET}" ${CMAKE_LIBRARY_OUTPUT_DIRECTORY}/${DEST_FILE} WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}) + execute_process(COMMAND ${CMAKE_COMMAND} -E create_symlink "${LINK_TARGET}" ${DEST_FILE} WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}) + endif(WIN32 AND NOT CYGWIN AND NOT MSYS) +endmacro() + +# libpng is a library so default to 'lib' +if(NOT DEFINED CMAKE_INSTALL_LIBDIR) + set(CMAKE_INSTALL_LIBDIR lib) +endif(NOT DEFINED CMAKE_INSTALL_LIBDIR) + +# CREATE PKGCONFIG FILES +# we use the same files like ./configure, so we have to set its vars +# Only do this on Windows for Cygwin - the files don't make much sense outside +# a UNIX look alike +if(NOT WIN32 OR CYGWIN OR MINGW) + set(prefix ${CMAKE_INSTALL_PREFIX}) + set(exec_prefix ${CMAKE_INSTALL_PREFIX}) + set(libdir ${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_LIBDIR}) + set(includedir ${CMAKE_INSTALL_PREFIX}/include) + set(LIBS "-lz -lm") + configure_file(${CMAKE_CURRENT_SOURCE_DIR}/libpng.pc.in + ${CMAKE_CURRENT_BINARY_DIR}/${PNGLIB_NAME}.pc @ONLY) + CREATE_SYMLINK(${PNGLIB_NAME}.pc libpng.pc) + + configure_file(${CMAKE_CURRENT_SOURCE_DIR}/libpng-config.in + ${CMAKE_CURRENT_BINARY_DIR}/${PNGLIB_NAME}-config @ONLY) + CREATE_SYMLINK(${PNGLIB_NAME}-config libpng-config) +endif(NOT WIN32 OR CYGWIN OR MINGW) + +# SET UP LINKS +if(PNG_SHARED) + set_target_properties(${PNG_LIB_NAME} PROPERTIES +# VERSION 16.${PNGLIB_RELEASE}.1.6.21 + VERSION 16.${PNGLIB_RELEASE}.0 + SOVERSION 16 + CLEAN_DIRECT_OUTPUT 1) +endif() +if(PNG_STATIC) + # MSVC doesn't use a different file extension for shared vs. static + # libs. We are able to change OUTPUT_NAME to remove the _static + # for all other platforms. + if(NOT MSVC) + set_target_properties(${PNG_LIB_NAME_STATIC} PROPERTIES + OUTPUT_NAME ${PNG_LIB_NAME} + CLEAN_DIRECT_OUTPUT 1) + endif() +endif() + +# If CMake > 2.4.x, we set a variable used below to export +# targets to an export file. +# TODO: Use VERSION_GREATER after our cmake_minimum_required >= 2.6.2 +if(CMAKE_MAJOR_VERSION GREATER 1 AND CMAKE_MINOR_VERSION GREATER 4) + set(PNG_EXPORT_RULE EXPORT libpng) +elseif(CMAKE_MAJOR_VERSION GREATER 2) # future proof + set(PNG_EXPORT_RULE EXPORT libpng) +endif() + +# INSTALL +if(NOT SKIP_INSTALL_LIBRARIES AND NOT SKIP_INSTALL_ALL ) + install(TARGETS ${PNG_LIB_TARGETS} + ${PNG_EXPORT_RULE} + RUNTIME DESTINATION bin + LIBRARY DESTINATION ${CMAKE_INSTALL_LIBDIR} + ARCHIVE DESTINATION ${CMAKE_INSTALL_LIBDIR} + FRAMEWORK DESTINATION ${CMAKE_INSTALL_LIBDIR}) + + if(PNG_SHARED) + # Create a symlink for libpng.dll.a => libpng16.dll.a on Cygwin + if(CYGWIN OR MINGW) + get_target_property(BUILD_TARGET_LOCATION ${PNG_LIB_NAME} LOCATION_${CMAKE_BUILD_TYPE}) + CREATE_SYMLINK(${BUILD_TARGET_LOCATION} libpng${CMAKE_IMPORT_LIBRARY_SUFFIX}) + install(FILES ${CMAKE_CURRENT_BINARY_DIR}/libpng${CMAKE_IMPORT_LIBRARY_SUFFIX} + DESTINATION ${CMAKE_INSTALL_LIBDIR}) + endif(CYGWIN OR MINGW) + + if(NOT WIN32) + get_target_property(BUILD_TARGET_LOCATION ${PNG_LIB_NAME} LOCATION_${CMAKE_BUILD_TYPE}) + CREATE_SYMLINK(${BUILD_TARGET_LOCATION} libpng${CMAKE_SHARED_LIBRARY_SUFFIX}) + install(FILES ${CMAKE_CURRENT_BINARY_DIR}/libpng${CMAKE_SHARED_LIBRARY_SUFFIX} + DESTINATION ${CMAKE_INSTALL_LIBDIR}) + endif(NOT WIN32) + endif(PNG_SHARED) + + if(PNG_STATIC) + if(NOT WIN32 OR CYGWIN OR MINGW) + get_target_property(BUILD_TARGET_LOCATION ${PNG_LIB_NAME_STATIC} LOCATION_${CMAKE_BUILD_TYPE}) + CREATE_SYMLINK(${BUILD_TARGET_LOCATION} libpng${CMAKE_STATIC_LIBRARY_SUFFIX}) + install(FILES ${CMAKE_CURRENT_BINARY_DIR}/libpng${CMAKE_STATIC_LIBRARY_SUFFIX} + DESTINATION ${CMAKE_INSTALL_LIBDIR}) + endif(NOT WIN32 OR CYGWIN OR MINGW) + endif() +endif() + +if(NOT SKIP_INSTALL_HEADERS AND NOT SKIP_INSTALL_ALL ) + install(FILES ${libpng_public_hdrs} DESTINATION include) + install(FILES ${libpng_public_hdrs} DESTINATION include/${PNGLIB_NAME}) +endif() +if(NOT SKIP_INSTALL_EXECUTABLES AND NOT SKIP_INSTALL_ALL ) + if(NOT WIN32 OR CYGWIN OR MINGW) + install(PROGRAMS ${CMAKE_CURRENT_BINARY_DIR}/libpng-config DESTINATION bin) + install(PROGRAMS ${CMAKE_CURRENT_BINARY_DIR}/${PNGLIB_NAME}-config + DESTINATION bin) + endif(NOT WIN32 OR CYGWIN OR MINGW) +endif() + +if(NOT SKIP_INSTALL_FILES AND NOT SKIP_INSTALL_ALL ) + # Install man pages + if(NOT PNG_MAN_DIR) + set(PNG_MAN_DIR "share/man") + endif() + install(FILES libpng.3 libpngpf.3 DESTINATION ${PNG_MAN_DIR}/man3) + install(FILES png.5 DESTINATION ${PNG_MAN_DIR}/man5) + # Install pkg-config files + if(NOT WIN32 OR CYGWIN OR MINGW) + install(FILES ${CMAKE_CURRENT_BINARY_DIR}/libpng.pc + DESTINATION ${CMAKE_INSTALL_LIBDIR}/pkgconfig) + install(PROGRAMS ${CMAKE_CURRENT_BINARY_DIR}/libpng-config + DESTINATION bin) + install(FILES ${CMAKE_CURRENT_BINARY_DIR}/${PNGLIB_NAME}.pc + DESTINATION ${CMAKE_INSTALL_LIBDIR}/pkgconfig) + install(PROGRAMS ${CMAKE_CURRENT_BINARY_DIR}/${PNGLIB_NAME}-config + DESTINATION bin) + endif(NOT WIN32 OR CYGWIN OR MINGW) +endif() + +# On versions of CMake that support it, create an export file CMake +# users can include() to import our targets +if(PNG_EXPORT_RULE AND NOT SKIP_INSTALL_EXPORT AND NOT SKIP_INSTALL_ALL ) + install(EXPORT libpng DESTINATION lib/libpng FILE lib${PNG_LIB_NAME}.cmake) +endif() + +# what's with libpng-manual.txt and all the extra files? + +# UNINSTALL +# do we need this? + +# DIST +# do we need this? + +# to create msvc import lib for mingw compiled shared lib +# pexports libpng.dll > libpng.def +# lib /def:libpng.def /machine:x86 + diff --git a/compat/libpng/INSTALL b/compat/libpng/INSTALL new file mode 100755 index 0000000..aaeb5e1 --- /dev/null +++ b/compat/libpng/INSTALL @@ -0,0 +1,407 @@ + +Installing libpng + +Contents + + I. Simple installation + II. Rebuilding the configure scripts + III. Using scripts/makefile* + IV. Using cmake + V. Directory structure + VI. Building with project files + VII. Building with makefiles +VIII. Configuring libpng for 16-bit platforms + IX. Configuring for DOS + X. Configuring for Medium Model + XI. Prepending a prefix to exported symbols + XII. Configuring for compiler xxx: +XIII. Removing unwanted object code + XIV. Changes to the build and configuration of libpng in libpng-1.5.x + XV. Setjmp/longjmp issues + XVI. Other sources of information about libpng + +I. Simple installation + +On Unix/Linux and similar systems, you can simply type + + ./configure [--prefix=/path] + make check + make install + +and ignore the rest of this document. "/path" is the path to the directory +where you want to install the libpng "lib", "include", and "bin" +subdirectories. + +If you downloaded a GIT clone, you will need to run ./autogen.sh before +running ./configure, to create "configure" and "Makefile.in" which are +not included in the GIT repository. + +Note that "configure" is only included in the "*.tar" distributions and not +in the "*.zip" or "*.7z" distributions. If you downloaded one of those +distributions, see "Building with project files" or "Building with makefiles", +below. + +II. Rebuilding the configure scripts + +If configure does not work on your system, or if you have a need to +change configure.ac or Makefile.am, and you have a reasonably +up-to-date set of tools, running ./autogen.sh in a git clone before +running ./configure may fix the problem. To be really sure that you +aren't using any of the included pre-built scripts, you can do this: + + ./configure --enable-maintainer-mode + make maintainer-clean + ./autogen.sh --maintainer --clean + ./autogen.sh --maintainer + ./configure [--prefix=/path] [other options] + make + make install + make check + +III. Using scripts/makefile* + +Instead, you can use one of the custom-built makefiles in the +"scripts" directory + + cp scripts/pnglibconf.h.prebuilt pnglibconf.h + cp scripts/makefile.system makefile + make test + make install + +The files that are presently available in the scripts directory +are listed and described in scripts/README.txt. + +Or you can use one of the "projects" in the "projects" directory. + +Before installing libpng, you must first install zlib, if it +is not already on your system. zlib can usually be found +wherever you got libpng; otherwise go to http://zlib.net. You can place +zlib in in the same directory as libpng or in another directory. + +If your system already has a preinstalled zlib you will still need +to have access to the zlib.h and zconf.h include files that +correspond to the version of zlib that's installed. + +If you wish to test with a particular zlib that is not first in the +standard library search path, put ZLIBLIB, ZLIBINC, CPPFLAGS, LDFLAGS, +and LD_LIBRARY_PATH in your environment before running "make test" +or "make distcheck": + +ZLIBLIB=/path/to/lib export ZLIBLIB +ZLIBINC=/path/to/include export ZLIBINC +CPPFLAGS="-I$ZLIBINC" export CPPFLAGS +LDFLAGS="-L$ZLIBLIB" export LDFLAGS +LD_LIBRARY_PATH="$ZLIBLIB:$LD_LIBRARY_PATH" export LD_LIBRARY_PATH + +If you are using one of the makefile scripts, put ZLIBLIB and ZLIBINC +in your environment and type "make ZLIBLIB=$ZLIBLIB ZLIBINC=$ZLIBINC test". + +IV. Using cmake + +If you want to use "cmake" (see www.cmake.org), type + + cmake . -DCMAKE_INSTALL_PREFIX=/path + make + make install + +As when using the simple configure method described above, "/path" points to +the installation directory where you want to put the libpng "lib", "include", +and "bin" subdirectories. + +V. Directory structure + +You can rename the directories that you downloaded (they +might be called "libpng-x.y.z" or "libpngNN" and "zlib-1.2.8" +or "zlib128") so that you have directories called "zlib" and "libpng". + +Your directory structure should look like this: + + .. (the parent directory) + libpng (this directory) + INSTALL (this file) + README + *.h, *.c => libpng source files + CMakeLists.txt => "cmake" script + configuration files: + configure.ac, configure, Makefile.am, Makefile.in, + autogen.sh, config.guess, ltmain.sh, missing, libpng.pc.in, + libpng-config.in, aclocal.m4, config.h.in, config.sub, + depcomp, install-sh, mkinstalldirs, test-pngtest.sh + contrib + arm-neon, conftest, examples, gregbook, libtests, pngminim, + pngminus, pngsuite, tools, visupng + projects + cbuilder5, owatcom, visualc71, vstudio, xcode + scripts + makefile.* + *.def (module definition files) + etc. + pngtest.png + etc. + zlib + README, *.h, *.c contrib, etc. + +If the line endings in the files look funny, you may wish to get the other +distribution of libpng. It is available in both tar.gz (UNIX style line +endings) and zip (DOS style line endings) formats. + +VI. Building with project files + +If you are building libpng with MSVC, you can enter the +libpng projects\visualc71 or vstudio directory and follow the instructions +in README.txt. + +Otherwise enter the zlib directory and follow the instructions in zlib/README, +then come back here and run "configure" or choose the appropriate +makefile.sys in the scripts directory. + +VII. Building with makefiles + +Copy the file (or files) that you need from the +scripts directory into this directory, for example + + MSDOS example: copy scripts\makefile.msc makefile + copy scripts\pnglibconf.h.prebuilt pnglibconf.h + UNIX example: cp scripts/makefile.std makefile + cp scripts/pnglibconf.h.prebuilt pnglibconf.h + +Read the makefile to see if you need to change any source or +target directories to match your preferences. + +Then read pnglibconf.dfa to see if you want to make any configuration +changes. + +Then just run "make" which will create the libpng library in +this directory and "make test" which will run a quick test that reads +the "pngtest.png" file and writes a "pngout.png" file that should be +identical to it. Look for "9782 zero samples" in the output of the +test. For more confidence, you can run another test by typing +"pngtest pngnow.png" and looking for "289 zero samples" in the output. +Also, you can run "pngtest -m contrib/pngsuite/*.png" and compare +your output with the result shown in contrib/pngsuite/README. + +Most of the makefiles will allow you to run "make install" to +put the library in its final resting place (if you want to +do that, run "make install" in the zlib directory first if necessary). +Some also allow you to run "make test-installed" after you have +run "make install". + +VIII. Configuring libpng for 16-bit platforms + +You will want to look into zconf.h to tell zlib (and thus libpng) that +it cannot allocate more than 64K at a time. Even if you can, the memory +won't be accessible. So limit zlib and libpng to 64K by defining MAXSEG_64K. + +IX. Configuring for DOS + +For DOS users who only have access to the lower 640K, you will +have to limit zlib's memory usage via a png_set_compression_mem_level() +call. See zlib.h or zconf.h in the zlib library for more information. + +X. Configuring for Medium Model + +Libpng's support for medium model has been tested on most of the popular +compilers. Make sure MAXSEG_64K gets defined, USE_FAR_KEYWORD gets +defined, and FAR gets defined to far in pngconf.h, and you should be +all set. Everything in the library (except for zlib's structure) is +expecting far data. You must use the typedefs with the p or pp on +the end for pointers (or at least look at them and be careful). Make +note that the rows of data are defined as png_bytepp, which is +an "unsigned char far * far *". + +XI. Prepending a prefix to exported symbols + +Starting with libpng-1.6.0, you can configure libpng (when using the +"configure" script) to prefix all exported symbols by means of the +configuration option "--with-libpng-prefix=FOO_", where FOO_ can be any +string beginning with a letter and containing only uppercase +and lowercase letters, digits, and the underscore (i.e., a C language +identifier). This creates a set of macros in pnglibconf.h, so this is +transparent to applications; their function calls get transformed by +the macros to use the modified names. + +XII. Configuring for compiler xxx: + +All includes for libpng are in pngconf.h. If you need to add, change +or delete an include, this is the place to do it. +The includes that are not needed outside libpng are placed in pngpriv.h, +which is only used by the routines inside libpng itself. +The files in libpng proper only include pngpriv.h and png.h, which +in turn includes pngconf.h and, as of libpng-1.5.0, pnglibconf.h. +As of libpng-1.5.0, pngpriv.h also includes three other private header +files, pngstruct.h, pnginfo.h, and pngdebug.h, which contain material +that previously appeared in the public headers. + +XIII. Removing unwanted object code + +There are a bunch of #define's in pngconf.h that control what parts of +libpng are compiled. All the defines end in _SUPPORTED. If you are +never going to use a capability, you can change the #define to #undef +before recompiling libpng and save yourself code and data space, or +you can turn off individual capabilities with defines that begin with +PNG_NO_. + +In libpng-1.5.0 and later, the #define's are in pnglibconf.h instead. + +You can also turn all of the transforms and ancillary chunk capabilities +off en masse with compiler directives that define +PNG_NO_READ[or WRITE]_TRANSFORMS, or PNG_NO_READ[or WRITE]_ANCILLARY_CHUNKS, +or all four, along with directives to turn on any of the capabilities that +you do want. The PNG_NO_READ[or WRITE]_TRANSFORMS directives disable the +extra transformations but still leave the library fully capable of reading +and writing PNG files with all known public chunks. Use of the +PNG_NO_READ[or WRITE]_ANCILLARY_CHUNKS directive produces a library +that is incapable of reading or writing ancillary chunks. If you are +not using the progressive reading capability, you can turn that off +with PNG_NO_PROGRESSIVE_READ (don't confuse this with the INTERLACING +capability, which you'll still have). + +All the reading and writing specific code are in separate files, so the +linker should only grab the files it needs. However, if you want to +make sure, or if you are building a stand alone library, all the +reading files start with "pngr" and all the writing files start with "pngw". +The files that don't match either (like png.c, pngtrans.c, etc.) +are used for both reading and writing, and always need to be included. +The progressive reader is in pngpread.c + +If you are creating or distributing a dynamically linked library (a .so +or DLL file), you should not remove or disable any parts of the library, +as this will cause applications linked with different versions of the +library to fail if they call functions not available in your library. +The size of the library itself should not be an issue, because only +those sections that are actually used will be loaded into memory. + +XIV. Changes to the build and configuration of libpng in libpng-1.5.x + +Details of internal changes to the library code can be found in the CHANGES +file and in the GIT repository logs. These will be of no concern to the vast +majority of library users or builders; however, the few who configure libpng +to a non-default feature set may need to change how this is done. + +There should be no need for library builders to alter build scripts if +these use the distributed build support - configure or the makefiles - +however, users of the makefiles may care to update their build scripts +to build pnglibconf.h where the corresponding makefile does not do so. + +Building libpng with a non-default configuration has changed completely. +The old method using pngusr.h should still work correctly even though the +way pngusr.h is used in the build has been changed; however, library +builders will probably want to examine the changes to take advantage of +new capabilities and to simplify their build system. + +A. Specific changes to library configuration capabilities + +The exact mechanism used to control attributes of API functions has +changed. A single set of operating system independent macro definitions +is used and operating system specific directives are defined in +pnglibconf.h + +As part of this the mechanism used to choose procedure call standards on +those systems that allow a choice has been changed. At present this only +affects certain Microsoft (DOS, Windows) and IBM (OS/2) operating systems +running on Intel processors. As before, PNGAPI is defined where required +to control the exported API functions; however, two new macros, PNGCBAPI +and PNGCAPI, are used instead for callback functions (PNGCBAPI) and +(PNGCAPI) for functions that must match a C library prototype (currently +only png_longjmp_ptr, which must match the C longjmp function.) The new +approach is documented in pngconf.h + +Despite these changes, libpng 1.5.0 only supports the native C function +calling standard on those platforms tested so far (__cdecl on Microsoft +Windows). This is because the support requirements for alternative +calling conventions seem to no longer exist. Developers who find it +necessary to set PNG_API_RULE to 1 should advise the mailing list +(png-mng-implement) of this and library builders who use Openwatcom and +therefore set PNG_API_RULE to 2 should also contact the mailing list. + +B. Changes to the configuration mechanism + +Prior to libpng-1.5.0 library builders who needed to configure libpng +had either to modify the exported pngconf.h header file to add system +specific configuration or had to write feature selection macros into +pngusr.h and cause this to be included into pngconf.h by defining +PNG_USER_CONFIG. The latter mechanism had the disadvantage that an +application built without PNG_USER_CONFIG defined would see the +unmodified, default, libpng API and thus would probably fail to link. + +These mechanisms still work in the configure build and in any makefile +build that builds pnglibconf.h, although the feature selection macros +have changed somewhat as described above. In 1.5.0, however, pngusr.h is +processed only once, at the time the exported header file pnglibconf.h is +built. pngconf.h no longer includes pngusr.h; therefore, pngusr.h is ignored +after the build of pnglibconf.h and it is never included in an application +build. + +The formerly used alternative of adding a list of feature macros to the +CPPFLAGS setting in the build also still works; however, the macros will be +copied to pnglibconf.h and this may produce macro redefinition warnings +when the individual C files are compiled. + +All configuration now only works if pnglibconf.h is built from +scripts/pnglibconf.dfa. This requires the program awk. Brian Kernighan +(the original author of awk) maintains C source code of that awk and this +and all known later implementations (often called by subtly different +names - nawk and gawk for example) are adequate to build pnglibconf.h. +The Sun Microsystems (now Oracle) program 'awk' is an earlier version +and does not work; this may also apply to other systems that have a +functioning awk called 'nawk'. + +Configuration options are now documented in scripts/pnglibconf.dfa. This +file also includes dependency information that ensures a configuration is +consistent; that is, if a feature is switched off, dependent features are +also switched off. As a recommended alternative to using feature macros in +pngusr.h a system builder may also define equivalent options in pngusr.dfa +(or, indeed, any file) and add that to the configuration by setting +DFA_XTRA to the file name. The makefiles in contrib/pngminim illustrate +how to do this, and also illustrate a case where pngusr.h is still required. + +After you have built libpng, the definitions that were recorded in +pnglibconf.h are available to your application (pnglibconf.h is included +in png.h and gets installed alongside png.h and pngconf.h in your +$PREFIX/include directory). Do not edit pnglibconf.h after you have built +libpng, because than the settings would not accurately reflect the settings +that were used to build libpng. + +XV. Setjmp/longjmp issues + +Libpng uses setjmp()/longjmp() for error handling. Unfortunately setjmp() +is known to be not thread-safe on some platforms and we don't know of +any platform where it is guaranteed to be thread-safe. Therefore, if +your application is going to be using multiple threads, you should +configure libpng with PNG_NO_SETJMP in your pngusr.dfa file, with +-DPNG_NO_SETJMP on your compile line, or with + + #undef PNG_SETJMP_SUPPORTED + +in your pnglibconf.h or pngusr.h. + +Starting with libpng-1.6.0, the library included a "simplified API". +This requires setjmp/longjmp, so you must either build the library +with PNG_SETJMP_SUPPORTED defined, or with PNG_SIMPLIFIED_READ_SUPPORTED +and PNG_SIMPLIFIED_WRITE_SUPPORTED undefined. + +XVI. Other sources of information about libpng: + +Further information can be found in the README and libpng-manual.txt +files, in the individual makefiles, in png.h, and the manual pages +libpng.3 and png.5. + +Using the ./configure script -- 16 December 2002. +================================================= + +The ./configure script should work compatibly with what scripts/makefile.* +did, however there are some options you might need to add to configure +explicitly, which previously was done semi-automatically (if you didn't edit +scripts/makefile.* yourself, that is) + +CFLAGS="-Wall -O -funroll-loops \ +-malign-loops=2 -malign-functions=2" ./configure --prefix=/usr/include \ +--with-pkgconfigdir=/usr/lib/pkgconfig --includedir=/usr/include + +You can alternatively specify --includedir=/usr/include, /usr/local/include, +/usr/include/libpng16, or whatever. + +If you find that the configure script is out-of-date or is not supporting +your platform properly, try running autogen.sh to regenerate "configure", +"Makefile.in", and the other configuration files. Then try configure again. + diff --git a/compat/libpng/LICENSE b/compat/libpng/LICENSE new file mode 100755 index 0000000..028a1ed --- /dev/null +++ b/compat/libpng/LICENSE @@ -0,0 +1,112 @@ + +This copy of the libpng notices is provided for your convenience. In case of +any discrepancy between this copy and the notices in the file png.h that is +included in the libpng distribution, the latter shall prevail. + +COPYRIGHT NOTICE, DISCLAIMER, and LICENSE: + +If you modify libpng you may insert additional notices immediately following +this sentence. + +This code is released under the libpng license. + +libpng versions 1.0.7, July 1, 2000, through 1.6.21, January 15, 2016, are +Copyright (c) 2000-2002, 2004, 2006-2016 Glenn Randers-Pehrson, are +derived from libpng-1.0.6, and are distributed according to the same +disclaimer and license as libpng-1.0.6 with the following individuals +added to the list of Contributing Authors: + + Simon-Pierre Cadieux + Eric S. Raymond + Mans Rullgard + Cosmin Truta + Gilles Vollant + James Yu + +and with the following additions to the disclaimer: + + There is no warranty against interference with your enjoyment of the + library or against infringement. There is no warranty that our + efforts or the library will fulfill any of your particular purposes + or needs. This library is provided with all faults, and the entire + risk of satisfactory quality, performance, accuracy, and effort is with + the user. + +libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are +Copyright (c) 1998-2000 Glenn Randers-Pehrson, are derived from +libpng-0.96, and are distributed according to the same disclaimer and +license as libpng-0.96, with the following individuals added to the list +of Contributing Authors: + + Tom Lane + Glenn Randers-Pehrson + Willem van Schaik + +libpng versions 0.89, June 1996, through 0.96, May 1997, are +Copyright (c) 1996-1997 Andreas Dilger, are derived from libpng-0.88, +and are distributed according to the same disclaimer and license as +libpng-0.88, with the following individuals added to the list of +Contributing Authors: + + John Bowler + Kevin Bracey + Sam Bushell + Magnus Holmgren + Greg Roelofs + Tom Tanner + +libpng versions 0.5, May 1995, through 0.88, January 1996, are +Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc. + +For the purposes of this copyright and license, "Contributing Authors" +is defined as the following set of individuals: + + Andreas Dilger + Dave Martindale + Guy Eric Schalnat + Paul Schmidt + Tim Wegner + +The PNG Reference Library is supplied "AS IS". The Contributing Authors +and Group 42, Inc. disclaim all warranties, expressed or implied, +including, without limitation, the warranties of merchantability and of +fitness for any purpose. The Contributing Authors and Group 42, Inc. +assume no liability for direct, indirect, incidental, special, exemplary, +or consequential damages, which may result from the use of the PNG +Reference Library, even if advised of the possibility of such damage. + +Permission is hereby granted to use, copy, modify, and distribute this +source code, or portions hereof, for any purpose, without fee, subject +to the following restrictions: + + 1. The origin of this source code must not be misrepresented. + + 2. Altered versions must be plainly marked as such and must not + be misrepresented as being the original source. + + 3. This Copyright notice may not be removed or altered from any + source or altered source distribution. + +The Contributing Authors and Group 42, Inc. specifically permit, without +fee, and encourage the use of this source code as a component to +supporting the PNG file format in commercial products. If you use this +source code in a product, acknowledgment is not required but would be +appreciated. + +END OF COPYRIGHT NOTICE, DISCLAIMER, and LICENSE. + +A "png_get_copyright" function is available, for convenient use in "about" +boxes and the like: + + printf("%s", png_get_copyright(NULL)); + +Also, the PNG logo (in PNG format, of course) is supplied in the +files "pngbar.png" and "pngbar.jpg (88x31) and "pngnow.png" (98x31). + +Libpng is OSI Certified Open Source Software. OSI Certified Open Source is +a certification mark of the Open Source Initiative. OSI has not addressed +the additional disclaimers inserted at version 1.0.7. + +Glenn Randers-Pehrson +glennrp at users.sourceforge.net +January 15, 2016 diff --git a/compat/libpng/Makefile.am b/compat/libpng/Makefile.am new file mode 100755 index 0000000..73097db --- /dev/null +++ b/compat/libpng/Makefile.am @@ -0,0 +1,361 @@ +# Makefile.am: +# Source file for Makefile.in (and hence Makefile) +# + +PNGLIB_BASENAME= libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@ + +ACLOCAL_AMFLAGS = -I scripts + +# test programs - run on make check, make distcheck +check_PROGRAMS= pngtest pngunknown pngstest pngvalid pngimage + +# Utilities - installed +bin_PROGRAMS= pngfix png-fix-itxt + +# This ensures that pnglibconf.h gets built at the start of 'make all' or +# 'make check', but it does not add dependencies to the individual programs, +# this is done below. +# +# IMPORTANT: always add the object modules of new programs to the list below +# because otherwise the sequence 'configure; make new-program' will *sometimes* +# result in the installed (system) pnglibconf.h being used and the result is +# always wrong and always very confusing. +BUILT_SOURCES = pnglibconf.h + +pngtest_SOURCES = pngtest.c +pngtest_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la + +pngvalid_SOURCES = contrib/libtests/pngvalid.c +pngvalid_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la + +pngstest_SOURCES = contrib/libtests/pngstest.c +pngstest_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la + +pngunknown_SOURCES = contrib/libtests/pngunknown.c +pngunknown_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la + +pngimage_SOURCES = contrib/libtests/pngimage.c +pngimage_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la + +pngfix_SOURCES = contrib/tools/pngfix.c +pngfix_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la + +png_fix_itxt_SOURCES = contrib/tools/png-fix-itxt.c + +# Generally these are single line shell scripts to run a test with a particular +# set of parameters: +TESTS =\ + tests/pngtest\ + tests/pngvalid-gamma-16-to-8 tests/pngvalid-gamma-alpha-mode\ + tests/pngvalid-gamma-background tests/pngvalid-gamma-expand16-alpha-mode\ + tests/pngvalid-gamma-expand16-background\ + tests/pngvalid-gamma-expand16-transform tests/pngvalid-gamma-sbit\ + tests/pngvalid-gamma-threshold tests/pngvalid-gamma-transform\ + tests/pngvalid-progressive-size\ + tests/pngvalid-progressive-interlace-standard\ + tests/pngvalid-transform\ + tests/pngvalid-progressive-standard tests/pngvalid-standard\ + tests/pngstest-1.8 tests/pngstest-1.8-alpha tests/pngstest-linear\ + tests/pngstest-linear-alpha tests/pngstest-none tests/pngstest-none-alpha\ + tests/pngstest-sRGB tests/pngstest-sRGB-alpha tests/pngunknown-IDAT\ + tests/pngunknown-discard tests/pngunknown-if-safe tests/pngunknown-sAPI\ + tests/pngunknown-sTER tests/pngunknown-save tests/pngunknown-vpAg\ + tests/pngimage-quick tests/pngimage-full + +# man pages +dist_man_MANS= libpng.3 libpngpf.3 png.5 + +# generate the -config scripts if required +binconfigs= libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@-config +EXTRA_SCRIPTS= libpng-config libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@-config +bin_SCRIPTS= @binconfigs@ + +# rules to build libpng, only build the old library on request +lib_LTLIBRARIES=libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la +# EXTRA_LTLIBRARIES= libpng.la +libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES = png.c pngerror.c\ + pngget.c pngmem.c pngpread.c pngread.c pngrio.c pngrtran.c pngrutil.c\ + pngset.c pngtrans.c pngwio.c pngwrite.c pngwtran.c pngwutil.c\ + png.h pngconf.h pngdebug.h pnginfo.h pngpriv.h pngstruct.h pngusr.dfa + +if PNG_ARM_NEON +libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES += arm/arm_init.c\ + arm/filter_neon.S arm/filter_neon_intrinsics.c +endif + +nodist_libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES = pnglibconf.h + +libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_LDFLAGS = -no-undefined -export-dynamic \ + -version-number @PNGLIB_MAJOR@@PNGLIB_MINOR@:@PNGLIB_RELEASE@:0 + +if HAVE_LD_VERSION_SCRIPT +# Versioned symbols and restricted exports +if HAVE_SOLARIS_LD + libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_LDFLAGS += -Wl,-M -Wl,libpng.vers +else + libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_LDFLAGS += -Wl,--version-script=libpng.vers +endif + + libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_DEPENDENCIES = libpng.vers +else +# Only restricted exports when possible + libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_LDFLAGS += -export-symbols libpng.sym + libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_DEPENDENCIES = libpng.sym +endif + +#distribute headers in /usr/include/libpng/* +pkgincludedir= $(includedir)/$(PNGLIB_BASENAME) +pkginclude_HEADERS= png.h pngconf.h +nodist_pkginclude_HEADERS= pnglibconf.h + +# pkg-config stuff, note that libpng.pc is always required in order +# to get the correct library +pkgconfigdir = @pkgconfigdir@ +pkgconfig_DATA = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.pc + +# Extra source distribution files, '${srcdir}' is used below to stop build files +# from those directories being included. This only works if the configure is +# not done in the source directory! +EXTRA_DIST= \ + ANNOUNCE CHANGES INSTALL LICENSE README TODO \ + pngtest.png pngbar.png pngnow.png pngbar.jpg autogen.sh \ + ${srcdir}/contrib ${srcdir}/projects ${srcdir}/scripts \ + $(TESTS) $(XFAIL_TESTS) tests/pngstest \ + CMakeLists.txt example.c libpng-manual.txt + +SCRIPT_CLEANFILES=scripts/*.out scripts/*.chk + +CLEANFILES= *.tf? pngout.png libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.pc \ + libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@-config libpng.vers libpng.sym \ + check.new pnglibconf.h pngprefix.h symbols.new pngtest-log.txt \ + pnglibconf.out pnglibconf.c pnglibconf.pre pnglibconf.dfn \ + $(SCRIPT_CLEANFILES) + +MAINTAINERCLEANFILES = Makefile.in aclocal.m4 config.guess config.h.in \ +config.sub configure depcomp install-sh ltmain.sh missing + +# PNG_COPTS give extra options for the C compiler to be used on all compilation +# steps (unless targe_CFLAGS is specified; that will take precedence over +# AM_CFLAGS) +PNG_COPTS = @PNG_COPTS@ +AM_CFLAGS = ${PNG_COPTS} + +# DFNCPP is normally just CPP - the C preprocessor - but on Solaris and maybe +# other operating systems (NeXT?) the C preprocessor selected by configure +# checks input tokens for validity - effectively it performs part of the ANSI-C +# parsing - and therefore fails with the .df files. configure.ac has special +# checks for this and sets DFNCPP appropriately. +DFNCPP = @DFNCPP@ + +SUFFIXES = .chk .out + +$(PNGLIB_BASENAME).pc: libpng.pc + cp libpng.pc $@ + +$(PNGLIB_BASENAME)-config: libpng-config + cp libpng-config $@ + +scripts/sym.out scripts/vers.out: png.h pngconf.h pnglibconf.h +scripts/prefix.out: png.h pngconf.h pnglibconf.out +scripts/symbols.out: png.h pngconf.h $(srcdir)/scripts/pnglibconf.h.prebuilt +scripts/intprefix.out: pnglibconf.h + +libpng.sym: scripts/sym.out + rm -f $@ + cp $? $@ +libpng.vers: scripts/vers.out + rm -f $@ + cp $? $@ + +if DO_PNG_PREFIX +# Rename functions in scripts/prefix.out with a PNG_PREFIX prefix. +# Rename macros in scripts/macro.lst from PNG_PREFIXpng_ to PNG_ (the actual +# implementation of the macro). +pnglibconf.h: pnglibconf.out scripts/prefix.out scripts/macro.lst + rm -f $@ + $(AWK) 's==0 && NR>1{print prev}\ + s==0{prev=$$0}\ + s==1{print "#define", $$1, "@PNG_PREFIX@" $$1}\ + s==2{print "#define @PNG_PREFIX@png_" $$1, "PNG_" $$1}\ + END{print prev}' s=0 pnglibconf.out s=1 scripts/prefix.out\ + s=2 ${srcdir}/scripts/macro.lst >pnglibconf.tf8 + mv pnglibconf.tf8 $@ + +pngprefix.h: scripts/intprefix.out + rm -f pngprefix.tf1 + $(AWK) '{print "#define", $$1, "@PNG_PREFIX@" $$1}' $? >pngprefix.tf1 + mv pngprefix.tf1 $@ +else +pnglibconf.h: pnglibconf.out + rm -f $@ + cp $? $@ + +pngprefix.h: # is empty + :>$@ +endif + +$(srcdir)/scripts/pnglibconf.h.prebuilt: + @echo "Attempting to build $@" >&2 + @echo "This is a machine generated file, but if you want to make" >&2 + @echo "a new one simply make 'scripts/pnglibconf.out', copy that" >&2 + @echo "AND set PNG_ZLIB_VERNUM to 0 (you MUST do this)" >&2 + @exit 1 + +# The following is necessary to ensure that the local pnglibconf.h is used, not +# an installed one (this can happen immediately after on a clean system if +# 'make test' is the first thing the user does.) Only files which include +# one of the png source files (typically png.h or pngpriv.h) need to be listed +# here: +pngtest.o: pnglibconf.h + +contrib/libtests/makepng.o: pnglibconf.h +contrib/libtests/pngstest.o: pnglibconf.h +contrib/libtests/pngunknown.o: pnglibconf.h +contrib/libtests/pngimage.o: pnglibconf.h +contrib/libtests/pngvalid.o: pnglibconf.h +contrib/libtests/readpng.o: pnglibconf.h +contrib/libtests/tarith.o: pnglibconf.h +contrib/libtests/timepng.o: pnglibconf.h + +contrib/tools/makesRGB.o: pnglibconf.h +contrib/tools/pngfix.o: pnglibconf.h + +# We must use -DPNG_NO_USE_READ_MACROS here even when the library may actually +# be built with PNG_USE_READ_MACROS; this prevents the read macros from +# interfering with the symbol file format. +SYMBOL_CFLAGS = -DPNGLIB_LIBNAME='PNG@PNGLIB_MAJOR@@PNGLIB_MINOR@_0'\ + -DPNGLIB_VERSION='@PNGLIB_VERSION@'\ + -DSYMBOL_PREFIX='$(SYMBOL_PREFIX)'\ + -DPNG_NO_USE_READ_MACROS -DPNG_BUILDING_SYMBOL_TABLE + +if DO_PNG_PREFIX +SYMBOL_CFLAGS += -DPNG_PREFIX='@PNG_PREFIX@' +endif + +.c.out: + rm -f $@ $*.tf[12] + test -d scripts || mkdir scripts || test -d scripts + $(DFNCPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES)\ + $(CPPFLAGS) $(SYMBOL_CFLAGS) $< > $*.tf1 + $(AWK) -f "${srcdir}/scripts/dfn.awk" out="$*.tf2" $*.tf1 1>&2 + rm -f $*.tf1 + mv $*.tf2 $@ + +# The .c file for pnglibconf.h is machine generated +pnglibconf.c: scripts/pnglibconf.dfa scripts/options.awk pngconf.h pngusr.dfa $(DFA_XTRA) + rm -f $@ $*.tf[45] + $(AWK) -f ${srcdir}/scripts/options.awk out=$*.tf4 version=search\ + ${srcdir}/pngconf.h ${srcdir}/scripts/pnglibconf.dfa\ + ${srcdir}/pngusr.dfa $(DFA_XTRA) 1>&2 + $(AWK) -f ${srcdir}/scripts/options.awk out=$*.tf5 $*.tf4 1>&2 + rm $*.tf4 + mv $*.tf5 $@ + +# Symbol checks (.def and .out files should match) +scripts/symbols.chk: scripts/checksym.awk scripts/symbols.def scripts/symbols.out + +.out.chk: + rm -f $@ $*.new + $(AWK) -f ${srcdir}/scripts/checksym.awk ${srcdir}/scripts/${*F}.def\ + of="$*.new" $< >&2 + mv $*.new $@ + +# used on demand to regenerate the standard header, CPPFLAGS should +# be empty - no non-standard defines +scripts/pnglibconf.c: scripts/pnglibconf.dfa scripts/options.awk pngconf.h + rm -f $@ pnglibconf.tf[67] + test -z "$(CPPFLAGS)" + echo "com @PNGLIB_VERSION@ STANDARD API DEFINITION" |\ + $(AWK) -f ${srcdir}/scripts/options.awk out=pnglibconf.tf6\ + logunsupported=1 version=search ${srcdir}/pngconf.h -\ + ${srcdir}/scripts/pnglibconf.dfa 1>&2 + $(AWK) -f ${srcdir}/scripts/options.awk out=pnglibconf.tf7\ + pnglibconf.tf6 1>&2 + rm pnglibconf.tf6 + mv pnglibconf.tf7 $@ + +$(libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_OBJECTS): png.h pngconf.h \ + pnglibconf.h pngpriv.h pngdebug.h pnginfo.h pngstruct.h pngprefix.h + +test: check-am + +# Extra checks +check: scripts/symbols.chk + +# Don't distribute the generated script files +dist-hook: + cd '$(top_distdir)'; rm -f $(SCRIPT_CLEANFILES) + +# Make links between installed files with release-specific names and the generic +# file names. If this install rule is run the generic names will be deleted and +# recreated - this has obvious issues for systems with multiple installations. + +install-header-links: + @set -ex; cd '$(DESTDIR)$(includedir)'; for f in $(HEADERS); do \ + rm -f "$$f"; $(LN_S) "$(PNGLIB_BASENAME)/$$f" "$$f"; done + +uninstall-header-links: + cd '$(DESTDIR)$(includedir)'; rm -f $(HEADERS) + +install-libpng-pc: + @set -ex; cd '$(DESTDIR)$(pkgconfigdir)'; rm -f libpng.pc; \ + $(LN_S) '$(PNGLIB_BASENAME).pc' libpng.pc + +uninstall-libpng-pc: + rm -f '$(DESTDIR)$(pkgconfigdir)/libpng.pc' + +# EXT_LIST is a list of the possibly library directory extensions, this exists +# because we can't find a good way of discovering the file extensions that are +# actually installed on a given system, so instead we check for every extension +# we have seen. + +EXT_LIST = a dll.a so so.@PNGLIB_MAJOR@@PNGLIB_MINOR@.@PNGLIB_RELEASE@ la sl dylib + +install-library-links: + @set -x; cd '$(DESTDIR)$(libdir)';\ + for ext in $(EXT_LIST); do\ + rm -f "libpng.$$ext";\ + if test -f "$(PNGLIB_BASENAME).$$ext"; then\ + $(LN_S) "$(PNGLIB_BASENAME).$$ext" "libpng.$$ext" || exit 1;\ + fi;\ + done + +uninstall-library-links: + @set -x; cd '$(DESTDIR)$(libdir)'; for ext in $(EXT_LIST); do\ + rm -f "libpng.$$ext"; done + +install-libpng-config: + @set -ex; cd '$(DESTDIR)$(bindir)'; rm -f libpng-config; \ + $(LN_S) '$(PNGLIB_BASENAME)-config' libpng-config + +uninstall-libpng-config: + rm -f '$(DESTDIR)$(bindir)/libpng-config' + +if DO_INSTALL_LINKS +# If --enable-unversioned-links is specified the header and lib file links +# will be automatically made on a 'make install': + +install-data-hook: install-header-links +uninstall-hook: uninstall-header-links +install-exec-hook: install-library-links +uninstall-hook: uninstall-library-links +endif + +if DO_INSTALL_LIBPNG_PC +# Likewise, --install-pc causes libpng.pc to be constructed: + +install-data-hook: install-libpng-pc +uninstall-hook: uninstall-libpng-pc +endif + +if DO_INSTALL_LIBPNG_CONFIG +# And --install-config: + +install-exec-hook: install-libpng-config +uninstall-hook: uninstall-libpng-config +endif + +# The following addition ensures that 'make all' always builds the test programs +# too. It used to, but some change either in libpng or configure stopped this +# working. +all-am: $(check_PROGRAMS) diff --git a/compat/libpng/Makefile.in b/compat/libpng/Makefile.in new file mode 100755 index 0000000..b24c63e --- /dev/null +++ b/compat/libpng/Makefile.in @@ -0,0 +1,2211 @@ +# Makefile.in generated by automake 1.15 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2014 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# Makefile.am: +# Source file for Makefile.in (and hence Makefile) +# + + + + + +VPATH = @srcdir@ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +check_PROGRAMS = pngtest$(EXEEXT) pngunknown$(EXEEXT) \ + pngstest$(EXEEXT) pngvalid$(EXEEXT) pngimage$(EXEEXT) +bin_PROGRAMS = pngfix$(EXEEXT) png-fix-itxt$(EXEEXT) +@PNG_ARM_NEON_TRUE@am__append_1 = arm/arm_init.c\ +@PNG_ARM_NEON_TRUE@ arm/filter_neon.S arm/filter_neon_intrinsics.c + + +# Versioned symbols and restricted exports +@HAVE_LD_VERSION_SCRIPT_TRUE@@HAVE_SOLARIS_LD_TRUE@am__append_2 = -Wl,-M -Wl,libpng.vers +@HAVE_LD_VERSION_SCRIPT_TRUE@@HAVE_SOLARIS_LD_FALSE@am__append_3 = -Wl,--version-script=libpng.vers +# Only restricted exports when possible +@HAVE_LD_VERSION_SCRIPT_FALSE@am__append_4 = -export-symbols libpng.sym +@DO_PNG_PREFIX_TRUE@am__append_5 = -DPNG_PREFIX='@PNG_PREFIX@' +subdir = . +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/scripts/libtool.m4 \ + $(top_srcdir)/scripts/ltoptions.m4 \ + $(top_srcdir)/scripts/ltsugar.m4 \ + $(top_srcdir)/scripts/ltversion.m4 \ + $(top_srcdir)/scripts/lt~obsolete.m4 \ + $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ + $(am__configure_deps) $(pkginclude_HEADERS) $(am__DIST_COMMON) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno config.status.lineno +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = config.h +CONFIG_CLEAN_FILES = libpng.pc libpng-config +CONFIG_CLEAN_VPATH_FILES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" \ + "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man3dir)" \ + "$(DESTDIR)$(man5dir)" "$(DESTDIR)$(pkgconfigdir)" \ + "$(DESTDIR)$(pkgincludedir)" "$(DESTDIR)$(pkgincludedir)" +LTLIBRARIES = $(lib_LTLIBRARIES) +libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_LIBADD = +am__libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES_DIST = png.c \ + pngerror.c pngget.c pngmem.c pngpread.c pngread.c pngrio.c \ + pngrtran.c pngrutil.c pngset.c pngtrans.c pngwio.c pngwrite.c \ + pngwtran.c pngwutil.c png.h pngconf.h pngdebug.h pnginfo.h \ + pngpriv.h pngstruct.h pngusr.dfa arm/arm_init.c \ + arm/filter_neon.S arm/filter_neon_intrinsics.c +am__dirstamp = $(am__leading_dot)dirstamp +@PNG_ARM_NEON_TRUE@am__objects_1 = arm/arm_init.lo arm/filter_neon.lo \ +@PNG_ARM_NEON_TRUE@ arm/filter_neon_intrinsics.lo +am_libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_OBJECTS = png.lo pngerror.lo \ + pngget.lo pngmem.lo pngpread.lo pngread.lo pngrio.lo \ + pngrtran.lo pngrutil.lo pngset.lo pngtrans.lo pngwio.lo \ + pngwrite.lo pngwtran.lo pngwutil.lo $(am__objects_1) +nodist_libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_OBJECTS = +libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_OBJECTS = \ + $(am_libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_OBJECTS) \ + $(nodist_libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_OBJECTS) +AM_V_lt = $(am__v_lt_@AM_V@) +am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) +am__v_lt_0 = --silent +am__v_lt_1 = +libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_LINK = $(LIBTOOL) $(AM_V_lt) \ + --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link \ + $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_LDFLAGS) $(LDFLAGS) -o \ + $@ +PROGRAMS = $(bin_PROGRAMS) +am_png_fix_itxt_OBJECTS = contrib/tools/png-fix-itxt.$(OBJEXT) +png_fix_itxt_OBJECTS = $(am_png_fix_itxt_OBJECTS) +png_fix_itxt_LDADD = $(LDADD) +am_pngfix_OBJECTS = contrib/tools/pngfix.$(OBJEXT) +pngfix_OBJECTS = $(am_pngfix_OBJECTS) +pngfix_DEPENDENCIES = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la +am_pngimage_OBJECTS = contrib/libtests/pngimage.$(OBJEXT) +pngimage_OBJECTS = $(am_pngimage_OBJECTS) +pngimage_DEPENDENCIES = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la +am_pngstest_OBJECTS = contrib/libtests/pngstest.$(OBJEXT) +pngstest_OBJECTS = $(am_pngstest_OBJECTS) +pngstest_DEPENDENCIES = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la +am_pngtest_OBJECTS = pngtest.$(OBJEXT) +pngtest_OBJECTS = $(am_pngtest_OBJECTS) +pngtest_DEPENDENCIES = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la +am_pngunknown_OBJECTS = contrib/libtests/pngunknown.$(OBJEXT) +pngunknown_OBJECTS = $(am_pngunknown_OBJECTS) +pngunknown_DEPENDENCIES = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la +am_pngvalid_OBJECTS = contrib/libtests/pngvalid.$(OBJEXT) +pngvalid_OBJECTS = $(am_pngvalid_OBJECTS) +pngvalid_DEPENDENCIES = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la +SCRIPTS = $(bin_SCRIPTS) +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +DEFAULT_INCLUDES = -I.@am__isrc@ +depcomp = $(SHELL) $(top_srcdir)/depcomp +am__depfiles_maybe = depfiles +am__mv = mv -f +CPPASCOMPILE = $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ + $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS) +LTCPPASCOMPILE = $(LIBTOOL) $(AM_V_lt) $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(CCAS) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CCASFLAGS) $(CCASFLAGS) +AM_V_CPPAS = $(am__v_CPPAS_@AM_V@) +am__v_CPPAS_ = $(am__v_CPPAS_@AM_DEFAULT_V@) +am__v_CPPAS_0 = @echo " CPPAS " $@; +am__v_CPPAS_1 = +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(CFLAGS) +AM_V_CC = $(am__v_CC_@AM_V@) +am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) +am__v_CC_0 = @echo " CC " $@; +am__v_CC_1 = +CCLD = $(CC) +LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_CCLD = $(am__v_CCLD_@AM_V@) +am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) +am__v_CCLD_0 = @echo " CCLD " $@; +am__v_CCLD_1 = +SOURCES = $(libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES) \ + $(nodist_libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES) \ + $(png_fix_itxt_SOURCES) $(pngfix_SOURCES) $(pngimage_SOURCES) \ + $(pngstest_SOURCES) $(pngtest_SOURCES) $(pngunknown_SOURCES) \ + $(pngvalid_SOURCES) +DIST_SOURCES = \ + $(am__libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES_DIST) \ + $(png_fix_itxt_SOURCES) $(pngfix_SOURCES) $(pngimage_SOURCES) \ + $(pngstest_SOURCES) $(pngtest_SOURCES) $(pngunknown_SOURCES) \ + $(pngvalid_SOURCES) +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +man3dir = $(mandir)/man3 +man5dir = $(mandir)/man5 +NROFF = nroff +MANS = $(dist_man_MANS) +DATA = $(pkgconfig_DATA) +HEADERS = $(nodist_pkginclude_HEADERS) $(pkginclude_HEADERS) +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ + $(LISP)config.h.in +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` +ETAGS = etags +CTAGS = ctags +CSCOPE = cscope +AM_RECURSIVE_TARGETS = cscope check recheck +am__tty_colors_dummy = \ + mgn= red= grn= lgn= blu= brg= std=; \ + am__color_tests=no +am__tty_colors = { \ + $(am__tty_colors_dummy); \ + if test "X$(AM_COLOR_TESTS)" = Xno; then \ + am__color_tests=no; \ + elif test "X$(AM_COLOR_TESTS)" = Xalways; then \ + am__color_tests=yes; \ + elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \ + am__color_tests=yes; \ + fi; \ + if test $$am__color_tests = yes; then \ + red=''; \ + grn=''; \ + lgn=''; \ + blu=''; \ + mgn=''; \ + brg=''; \ + std=''; \ + fi; \ +} +am__recheck_rx = ^[ ]*:recheck:[ ]* +am__global_test_result_rx = ^[ ]*:global-test-result:[ ]* +am__copy_in_global_log_rx = ^[ ]*:copy-in-global-log:[ ]* +# A command that, given a newline-separated list of test names on the +# standard input, print the name of the tests that are to be re-run +# upon "make recheck". +am__list_recheck_tests = $(AWK) '{ \ + recheck = 1; \ + while ((rc = (getline line < ($$0 ".trs"))) != 0) \ + { \ + if (rc < 0) \ + { \ + if ((getline line2 < ($$0 ".log")) < 0) \ + recheck = 0; \ + break; \ + } \ + else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \ + { \ + recheck = 0; \ + break; \ + } \ + else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \ + { \ + break; \ + } \ + }; \ + if (recheck) \ + print $$0; \ + close ($$0 ".trs"); \ + close ($$0 ".log"); \ +}' +# A command that, given a newline-separated list of test names on the +# standard input, create the global log from their .trs and .log files. +am__create_global_log = $(AWK) ' \ +function fatal(msg) \ +{ \ + print "fatal: making $@: " msg | "cat >&2"; \ + exit 1; \ +} \ +function rst_section(header) \ +{ \ + print header; \ + len = length(header); \ + for (i = 1; i <= len; i = i + 1) \ + printf "="; \ + printf "\n\n"; \ +} \ +{ \ + copy_in_global_log = 1; \ + global_test_result = "RUN"; \ + while ((rc = (getline line < ($$0 ".trs"))) != 0) \ + { \ + if (rc < 0) \ + fatal("failed to read from " $$0 ".trs"); \ + if (line ~ /$(am__global_test_result_rx)/) \ + { \ + sub("$(am__global_test_result_rx)", "", line); \ + sub("[ ]*$$", "", line); \ + global_test_result = line; \ + } \ + else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \ + copy_in_global_log = 0; \ + }; \ + if (copy_in_global_log) \ + { \ + rst_section(global_test_result ": " $$0); \ + while ((rc = (getline line < ($$0 ".log"))) != 0) \ + { \ + if (rc < 0) \ + fatal("failed to read from " $$0 ".log"); \ + print line; \ + }; \ + printf "\n"; \ + }; \ + close ($$0 ".trs"); \ + close ($$0 ".log"); \ +}' +# Restructured Text title. +am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; } +# Solaris 10 'make', and several other traditional 'make' implementations, +# pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it +# by disabling -e (using the XSI extension "set +e") if it's set. +am__sh_e_setup = case $$- in *e*) set +e;; esac +# Default flags passed to test drivers. +am__common_driver_flags = \ + --color-tests "$$am__color_tests" \ + --enable-hard-errors "$$am__enable_hard_errors" \ + --expect-failure "$$am__expect_failure" +# To be inserted before the command running the test. Creates the +# directory for the log if needed. Stores in $dir the directory +# containing $f, in $tst the test, in $log the log. Executes the +# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and +# passes TESTS_ENVIRONMENT. Set up options for the wrapper that +# will run the test scripts (or their associated LOG_COMPILER, if +# thy have one). +am__check_pre = \ +$(am__sh_e_setup); \ +$(am__vpath_adj_setup) $(am__vpath_adj) \ +$(am__tty_colors); \ +srcdir=$(srcdir); export srcdir; \ +case "$@" in \ + */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \ + *) am__odir=.;; \ +esac; \ +test "x$$am__odir" = x"." || test -d "$$am__odir" \ + || $(MKDIR_P) "$$am__odir" || exit $$?; \ +if test -f "./$$f"; then dir=./; \ +elif test -f "$$f"; then dir=; \ +else dir="$(srcdir)/"; fi; \ +tst=$$dir$$f; log='$@'; \ +if test -n '$(DISABLE_HARD_ERRORS)'; then \ + am__enable_hard_errors=no; \ +else \ + am__enable_hard_errors=yes; \ +fi; \ +case " $(XFAIL_TESTS) " in \ + *[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \ + am__expect_failure=yes;; \ + *) \ + am__expect_failure=no;; \ +esac; \ +$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT) +# A shell command to get the names of the tests scripts with any registered +# extension removed (i.e., equivalently, the names of the test logs, with +# the '.log' extension removed). The result is saved in the shell variable +# '$bases'. This honors runtime overriding of TESTS and TEST_LOGS. Sadly, +# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)", +# since that might cause problem with VPATH rewrites for suffix-less tests. +# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'. +am__set_TESTS_bases = \ + bases='$(TEST_LOGS)'; \ + bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \ + bases=`echo $$bases` +RECHECK_LOGS = $(TEST_LOGS) +TEST_SUITE_LOG = test-suite.log +TEST_EXTENSIONS = @EXEEXT@ .test +LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver +LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS) +am__set_b = \ + case '$@' in \ + */*) \ + case '$*' in \ + */*) b='$*';; \ + *) b=`echo '$@' | sed 's/\.log$$//'`; \ + esac;; \ + *) \ + b='$*';; \ + esac +am__test_logs1 = $(TESTS:=.log) +am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log) +TEST_LOGS = $(am__test_logs2:.test.log=.log) +TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver +TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \ + $(TEST_LOG_FLAGS) +am__DIST_COMMON = $(dist_man_MANS) $(srcdir)/Makefile.in \ + $(srcdir)/config.h.in $(srcdir)/libpng-config.in \ + $(srcdir)/libpng.pc.in INSTALL README TODO compile \ + config.guess config.sub depcomp install-sh ltmain.sh missing \ + test-driver +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) +am__remove_distdir = \ + if test -d "$(distdir)"; then \ + find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -rf "$(distdir)" \ + || { sleep 5 && rm -rf "$(distdir)"; }; \ + else :; fi +am__post_remove_distdir = $(am__remove_distdir) +DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.xz +GZIP_ENV = --best +DIST_TARGETS = dist-xz dist-gzip +distuninstallcheck_listfiles = find . -type f -print +am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ + | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' +distcleancheck_listfiles = find . -type f -print + +#distribute headers in /usr/include/libpng/* +pkgincludedir = $(includedir)/$(PNGLIB_BASENAME) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCAS = @CCAS@ +CCASDEPMODE = @CCASDEPMODE@ +CCASFLAGS = @CCASFLAGS@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ + +# DFNCPP is normally just CPP - the C preprocessor - but on Solaris and maybe +# other operating systems (NeXT?) the C preprocessor selected by configure +# checks input tokens for validity - effectively it performs part of the ANSI-C +# parsing - and therefore fails with the .df files. configure.ac has special +# checks for this and sets DFNCPP appropriately. +DFNCPP = @DFNCPP@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PNGLIB_MAJOR = @PNGLIB_MAJOR@ +PNGLIB_MINOR = @PNGLIB_MINOR@ +PNGLIB_RELEASE = @PNGLIB_RELEASE@ +PNGLIB_VERSION = @PNGLIB_VERSION@ + +# PNG_COPTS give extra options for the C compiler to be used on all compilation +# steps (unless targe_CFLAGS is specified; that will take precedence over +# AM_CFLAGS) +PNG_COPTS = @PNG_COPTS@ +PNG_PREFIX = @PNG_PREFIX@ +POW_LIB = @POW_LIB@ +RANLIB = @RANLIB@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +SYMBOL_PREFIX = @SYMBOL_PREFIX@ +VERSION = @VERSION@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ + +# generate the -config scripts if required +binconfigs = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@-config +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ + +# pkg-config stuff, note that libpng.pc is always required in order +# to get the correct library +pkgconfigdir = @pkgconfigdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +PNGLIB_BASENAME = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@ +ACLOCAL_AMFLAGS = -I scripts + +# This ensures that pnglibconf.h gets built at the start of 'make all' or +# 'make check', but it does not add dependencies to the individual programs, +# this is done below. +# +# IMPORTANT: always add the object modules of new programs to the list below +# because otherwise the sequence 'configure; make new-program' will *sometimes* +# result in the installed (system) pnglibconf.h being used and the result is +# always wrong and always very confusing. +BUILT_SOURCES = pnglibconf.h +pngtest_SOURCES = pngtest.c +pngtest_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la +pngvalid_SOURCES = contrib/libtests/pngvalid.c +pngvalid_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la +pngstest_SOURCES = contrib/libtests/pngstest.c +pngstest_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la +pngunknown_SOURCES = contrib/libtests/pngunknown.c +pngunknown_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la +pngimage_SOURCES = contrib/libtests/pngimage.c +pngimage_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la +pngfix_SOURCES = contrib/tools/pngfix.c +pngfix_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la +png_fix_itxt_SOURCES = contrib/tools/png-fix-itxt.c + +# Generally these are single line shell scripts to run a test with a particular +# set of parameters: +TESTS = \ + tests/pngtest\ + tests/pngvalid-gamma-16-to-8 tests/pngvalid-gamma-alpha-mode\ + tests/pngvalid-gamma-background tests/pngvalid-gamma-expand16-alpha-mode\ + tests/pngvalid-gamma-expand16-background\ + tests/pngvalid-gamma-expand16-transform tests/pngvalid-gamma-sbit\ + tests/pngvalid-gamma-threshold tests/pngvalid-gamma-transform\ + tests/pngvalid-progressive-size\ + tests/pngvalid-progressive-interlace-standard\ + tests/pngvalid-transform\ + tests/pngvalid-progressive-standard tests/pngvalid-standard\ + tests/pngstest-1.8 tests/pngstest-1.8-alpha tests/pngstest-linear\ + tests/pngstest-linear-alpha tests/pngstest-none tests/pngstest-none-alpha\ + tests/pngstest-sRGB tests/pngstest-sRGB-alpha tests/pngunknown-IDAT\ + tests/pngunknown-discard tests/pngunknown-if-safe tests/pngunknown-sAPI\ + tests/pngunknown-sTER tests/pngunknown-save tests/pngunknown-vpAg\ + tests/pngimage-quick tests/pngimage-full + + +# man pages +dist_man_MANS = libpng.3 libpngpf.3 png.5 +EXTRA_SCRIPTS = libpng-config libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@-config +bin_SCRIPTS = @binconfigs@ + +# rules to build libpng, only build the old library on request +lib_LTLIBRARIES = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la +# EXTRA_LTLIBRARIES= libpng.la +libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES = png.c pngerror.c \ + pngget.c pngmem.c pngpread.c pngread.c pngrio.c pngrtran.c \ + pngrutil.c pngset.c pngtrans.c pngwio.c pngwrite.c pngwtran.c \ + pngwutil.c png.h pngconf.h pngdebug.h pnginfo.h pngpriv.h \ + pngstruct.h pngusr.dfa $(am__append_1) +nodist_libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES = pnglibconf.h +libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_LDFLAGS = -no-undefined \ + -export-dynamic -version-number \ + @PNGLIB_MAJOR@@PNGLIB_MINOR@:@PNGLIB_RELEASE@:0 \ + $(am__append_2) $(am__append_3) $(am__append_4) +@HAVE_LD_VERSION_SCRIPT_FALSE@libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_DEPENDENCIES = libpng.sym +@HAVE_LD_VERSION_SCRIPT_TRUE@libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_DEPENDENCIES = libpng.vers +pkginclude_HEADERS = png.h pngconf.h +nodist_pkginclude_HEADERS = pnglibconf.h +pkgconfig_DATA = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.pc + +# Extra source distribution files, '${srcdir}' is used below to stop build files +# from those directories being included. This only works if the configure is +# not done in the source directory! +EXTRA_DIST = \ + ANNOUNCE CHANGES INSTALL LICENSE README TODO \ + pngtest.png pngbar.png pngnow.png pngbar.jpg autogen.sh \ + ${srcdir}/contrib ${srcdir}/projects ${srcdir}/scripts \ + $(TESTS) $(XFAIL_TESTS) tests/pngstest \ + CMakeLists.txt example.c libpng-manual.txt + +SCRIPT_CLEANFILES = scripts/*.out scripts/*.chk +CLEANFILES = *.tf? pngout.png libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.pc \ + libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@-config libpng.vers libpng.sym \ + check.new pnglibconf.h pngprefix.h symbols.new pngtest-log.txt \ + pnglibconf.out pnglibconf.c pnglibconf.pre pnglibconf.dfn \ + $(SCRIPT_CLEANFILES) + +MAINTAINERCLEANFILES = Makefile.in aclocal.m4 config.guess config.h.in \ +config.sub configure depcomp install-sh ltmain.sh missing + +AM_CFLAGS = ${PNG_COPTS} +SUFFIXES = .chk .out + +# We must use -DPNG_NO_USE_READ_MACROS here even when the library may actually +# be built with PNG_USE_READ_MACROS; this prevents the read macros from +# interfering with the symbol file format. +SYMBOL_CFLAGS = -DPNGLIB_LIBNAME='PNG@PNGLIB_MAJOR@@PNGLIB_MINOR@_0' \ + -DPNGLIB_VERSION='@PNGLIB_VERSION@' \ + -DSYMBOL_PREFIX='$(SYMBOL_PREFIX)' -DPNG_NO_USE_READ_MACROS \ + -DPNG_BUILDING_SYMBOL_TABLE $(am__append_5) + +# EXT_LIST is a list of the possibly library directory extensions, this exists +# because we can't find a good way of discovering the file extensions that are +# actually installed on a given system, so instead we check for every extension +# we have seen. +EXT_LIST = a dll.a so so.@PNGLIB_MAJOR@@PNGLIB_MINOR@.@PNGLIB_RELEASE@ la sl dylib +all: $(BUILT_SOURCES) config.h + $(MAKE) $(AM_MAKEFLAGS) all-am + +.SUFFIXES: +.SUFFIXES: .chk .out .S .c .lo .log .o .obj .test .test$(EXEEXT) .trs +am--refresh: Makefile + @: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ + $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + $(am__cd) $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) +$(am__aclocal_m4_deps): + +config.h: stamp-h1 + @test -f $@ || rm -f stamp-h1 + @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 + +stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status + @rm -f stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status config.h +$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) + rm -f stamp-h1 + touch $@ + +distclean-hdr: + -rm -f config.h stamp-h1 +libpng.pc: $(top_builddir)/config.status $(srcdir)/libpng.pc.in + cd $(top_builddir) && $(SHELL) ./config.status $@ +libpng-config: $(top_builddir)/config.status $(srcdir)/libpng-config.in + cd $(top_builddir) && $(SHELL) ./config.status $@ + +install-libLTLIBRARIES: $(lib_LTLIBRARIES) + @$(NORMAL_INSTALL) + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + list2=; for p in $$list; do \ + if test -f $$p; then \ + list2="$$list2 $$p"; \ + else :; fi; \ + done; \ + test -z "$$list2" || { \ + echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ + } + +uninstall-libLTLIBRARIES: + @$(NORMAL_UNINSTALL) + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + for p in $$list; do \ + $(am__strip_dir) \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ + done + +clean-libLTLIBRARIES: + -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) + @list='$(lib_LTLIBRARIES)'; \ + locs=`for p in $$list; do echo $$p; done | \ + sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ + sort -u`; \ + test -z "$$locs" || { \ + echo rm -f $${locs}; \ + rm -f $${locs}; \ + } +arm/$(am__dirstamp): + @$(MKDIR_P) arm + @: > arm/$(am__dirstamp) +arm/$(DEPDIR)/$(am__dirstamp): + @$(MKDIR_P) arm/$(DEPDIR) + @: > arm/$(DEPDIR)/$(am__dirstamp) +arm/arm_init.lo: arm/$(am__dirstamp) arm/$(DEPDIR)/$(am__dirstamp) +arm/filter_neon.lo: arm/$(am__dirstamp) arm/$(DEPDIR)/$(am__dirstamp) +arm/filter_neon_intrinsics.lo: arm/$(am__dirstamp) \ + arm/$(DEPDIR)/$(am__dirstamp) + +libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la: $(libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_OBJECTS) $(libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_DEPENDENCIES) $(EXTRA_libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_DEPENDENCIES) + $(AM_V_CCLD)$(libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_LINK) -rpath $(libdir) $(libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_OBJECTS) $(libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_LIBADD) $(LIBS) +install-binPROGRAMS: $(bin_PROGRAMS) + @$(NORMAL_INSTALL) + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ + fi; \ + for p in $$list; do echo "$$p $$p"; done | \ + sed 's/$(EXEEXT)$$//' | \ + while read p p1; do if test -f $$p \ + || test -f $$p1 \ + ; then echo "$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n;h' \ + -e 's|.*|.|' \ + -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ + sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) files[d] = files[d] " " $$1; \ + else { print "f", $$3 "/" $$4, $$1; } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ + $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ + } \ + ; done + +uninstall-binPROGRAMS: + @$(NORMAL_UNINSTALL) + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ + -e 's/$$/$(EXEEXT)/' \ + `; \ + test -n "$$list" || exit 0; \ + echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(bindir)" && rm -f $$files + +clean-binPROGRAMS: + @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list + +clean-checkPROGRAMS: + @list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list +contrib/tools/$(am__dirstamp): + @$(MKDIR_P) contrib/tools + @: > contrib/tools/$(am__dirstamp) +contrib/tools/$(DEPDIR)/$(am__dirstamp): + @$(MKDIR_P) contrib/tools/$(DEPDIR) + @: > contrib/tools/$(DEPDIR)/$(am__dirstamp) +contrib/tools/png-fix-itxt.$(OBJEXT): contrib/tools/$(am__dirstamp) \ + contrib/tools/$(DEPDIR)/$(am__dirstamp) + +png-fix-itxt$(EXEEXT): $(png_fix_itxt_OBJECTS) $(png_fix_itxt_DEPENDENCIES) $(EXTRA_png_fix_itxt_DEPENDENCIES) + @rm -f png-fix-itxt$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(png_fix_itxt_OBJECTS) $(png_fix_itxt_LDADD) $(LIBS) +contrib/tools/pngfix.$(OBJEXT): contrib/tools/$(am__dirstamp) \ + contrib/tools/$(DEPDIR)/$(am__dirstamp) + +pngfix$(EXEEXT): $(pngfix_OBJECTS) $(pngfix_DEPENDENCIES) $(EXTRA_pngfix_DEPENDENCIES) + @rm -f pngfix$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(pngfix_OBJECTS) $(pngfix_LDADD) $(LIBS) +contrib/libtests/$(am__dirstamp): + @$(MKDIR_P) contrib/libtests + @: > contrib/libtests/$(am__dirstamp) +contrib/libtests/$(DEPDIR)/$(am__dirstamp): + @$(MKDIR_P) contrib/libtests/$(DEPDIR) + @: > contrib/libtests/$(DEPDIR)/$(am__dirstamp) +contrib/libtests/pngimage.$(OBJEXT): contrib/libtests/$(am__dirstamp) \ + contrib/libtests/$(DEPDIR)/$(am__dirstamp) + +pngimage$(EXEEXT): $(pngimage_OBJECTS) $(pngimage_DEPENDENCIES) $(EXTRA_pngimage_DEPENDENCIES) + @rm -f pngimage$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(pngimage_OBJECTS) $(pngimage_LDADD) $(LIBS) +contrib/libtests/pngstest.$(OBJEXT): contrib/libtests/$(am__dirstamp) \ + contrib/libtests/$(DEPDIR)/$(am__dirstamp) + +pngstest$(EXEEXT): $(pngstest_OBJECTS) $(pngstest_DEPENDENCIES) $(EXTRA_pngstest_DEPENDENCIES) + @rm -f pngstest$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(pngstest_OBJECTS) $(pngstest_LDADD) $(LIBS) + +pngtest$(EXEEXT): $(pngtest_OBJECTS) $(pngtest_DEPENDENCIES) $(EXTRA_pngtest_DEPENDENCIES) + @rm -f pngtest$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(pngtest_OBJECTS) $(pngtest_LDADD) $(LIBS) +contrib/libtests/pngunknown.$(OBJEXT): \ + contrib/libtests/$(am__dirstamp) \ + contrib/libtests/$(DEPDIR)/$(am__dirstamp) + +pngunknown$(EXEEXT): $(pngunknown_OBJECTS) $(pngunknown_DEPENDENCIES) $(EXTRA_pngunknown_DEPENDENCIES) + @rm -f pngunknown$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(pngunknown_OBJECTS) $(pngunknown_LDADD) $(LIBS) +contrib/libtests/pngvalid.$(OBJEXT): contrib/libtests/$(am__dirstamp) \ + contrib/libtests/$(DEPDIR)/$(am__dirstamp) + +pngvalid$(EXEEXT): $(pngvalid_OBJECTS) $(pngvalid_DEPENDENCIES) $(EXTRA_pngvalid_DEPENDENCIES) + @rm -f pngvalid$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(pngvalid_OBJECTS) $(pngvalid_LDADD) $(LIBS) +install-binSCRIPTS: $(bin_SCRIPTS) + @$(NORMAL_INSTALL) + @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n' \ + -e 'h;s|.*|.|' \ + -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) { files[d] = files[d] " " $$1; \ + if (++n[d] == $(am__install_max)) { \ + print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ + else { print "f", d "/" $$4, $$1 } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \ + $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ + } \ + ; done + +uninstall-binSCRIPTS: + @$(NORMAL_UNINSTALL) + @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 's,.*/,,;$(transform)'`; \ + dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + -rm -f arm/*.$(OBJEXT) + -rm -f arm/*.lo + -rm -f contrib/libtests/*.$(OBJEXT) + -rm -f contrib/tools/*.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/png.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngerror.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngget.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngmem.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngpread.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngread.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngrio.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngrtran.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngrutil.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngset.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngtest.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngtrans.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngwio.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngwrite.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngwtran.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngwutil.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@arm/$(DEPDIR)/arm_init.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@arm/$(DEPDIR)/filter_neon.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@arm/$(DEPDIR)/filter_neon_intrinsics.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@contrib/libtests/$(DEPDIR)/pngimage.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@contrib/libtests/$(DEPDIR)/pngstest.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@contrib/libtests/$(DEPDIR)/pngunknown.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@contrib/libtests/$(DEPDIR)/pngvalid.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@contrib/tools/$(DEPDIR)/png-fix-itxt.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@contrib/tools/$(DEPDIR)/pngfix.Po@am__quote@ + +.S.o: +@am__fastdepCCAS_TRUE@ $(AM_V_CPPAS)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\ +@am__fastdepCCAS_TRUE@ $(CPPASCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ +@am__fastdepCCAS_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po +@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS@am__nodep@)$(CPPASCOMPILE) -c -o $@ $< + +.S.obj: +@am__fastdepCCAS_TRUE@ $(AM_V_CPPAS)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\ +@am__fastdepCCAS_TRUE@ $(CPPASCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\ +@am__fastdepCCAS_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po +@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS@am__nodep@)$(CPPASCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` + +.S.lo: +@am__fastdepCCAS_TRUE@ $(AM_V_CPPAS)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\ +@am__fastdepCCAS_TRUE@ $(LTCPPASCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ +@am__fastdepCCAS_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Plo +@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS@am__nodep@)$(LTCPPASCOMPILE) -c -o $@ $< + +.c.o: +@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\ +@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ +@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< + +.c.obj: +@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\ +@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\ +@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` + +.c.lo: +@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\ +@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ +@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + -rm -rf arm/.libs arm/_libs + +distclean-libtool: + -rm -f libtool config.lt +install-man3: $(dist_man_MANS) + @$(NORMAL_INSTALL) + @list1=''; \ + list2='$(dist_man_MANS)'; \ + test -n "$(man3dir)" \ + && test -n "`echo $$list1$$list2`" \ + || exit 0; \ + echo " $(MKDIR_P) '$(DESTDIR)$(man3dir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(man3dir)" || exit 1; \ + { for i in $$list1; do echo "$$i"; done; \ + if test -n "$$list2"; then \ + for i in $$list2; do echo "$$i"; done \ + | sed -n '/\.3[a-z]*$$/p'; \ + fi; \ + } | while read p; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; echo "$$p"; \ + done | \ + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ + sed 'N;N;s,\n, ,g' | { \ + list=; while read file base inst; do \ + if test "$$base" = "$$inst"; then list="$$list $$file"; else \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \ + fi; \ + done; \ + for i in $$list; do echo "$$i"; done | $(am__base_list) | \ + while read files; do \ + test -z "$$files" || { \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \ + done; } + +uninstall-man3: + @$(NORMAL_UNINSTALL) + @list=''; test -n "$(man3dir)" || exit 0; \ + files=`{ for i in $$list; do echo "$$i"; done; \ + l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \ + sed -n '/\.3[a-z]*$$/p'; \ + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ + dir='$(DESTDIR)$(man3dir)'; $(am__uninstall_files_from_dir) +install-man5: $(dist_man_MANS) + @$(NORMAL_INSTALL) + @list1=''; \ + list2='$(dist_man_MANS)'; \ + test -n "$(man5dir)" \ + && test -n "`echo $$list1$$list2`" \ + || exit 0; \ + echo " $(MKDIR_P) '$(DESTDIR)$(man5dir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(man5dir)" || exit 1; \ + { for i in $$list1; do echo "$$i"; done; \ + if test -n "$$list2"; then \ + for i in $$list2; do echo "$$i"; done \ + | sed -n '/\.5[a-z]*$$/p'; \ + fi; \ + } | while read p; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; echo "$$p"; \ + done | \ + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ + sed 'N;N;s,\n, ,g' | { \ + list=; while read file base inst; do \ + if test "$$base" = "$$inst"; then list="$$list $$file"; else \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst" || exit $$?; \ + fi; \ + done; \ + for i in $$list; do echo "$$i"; done | $(am__base_list) | \ + while read files; do \ + test -z "$$files" || { \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man5dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(man5dir)" || exit $$?; }; \ + done; } + +uninstall-man5: + @$(NORMAL_UNINSTALL) + @list=''; test -n "$(man5dir)" || exit 0; \ + files=`{ for i in $$list; do echo "$$i"; done; \ + l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \ + sed -n '/\.5[a-z]*$$/p'; \ + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ + dir='$(DESTDIR)$(man5dir)'; $(am__uninstall_files_from_dir) +install-pkgconfigDATA: $(pkgconfig_DATA) + @$(NORMAL_INSTALL) + @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ + done + +uninstall-pkgconfigDATA: + @$(NORMAL_UNINSTALL) + @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir) +install-nodist_pkgincludeHEADERS: $(nodist_pkginclude_HEADERS) + @$(NORMAL_INSTALL) + @list='$(nodist_pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(pkgincludedir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(pkgincludedir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(pkgincludedir)'"; \ + $(INSTALL_HEADER) $$files "$(DESTDIR)$(pkgincludedir)" || exit $$?; \ + done + +uninstall-nodist_pkgincludeHEADERS: + @$(NORMAL_UNINSTALL) + @list='$(nodist_pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(pkgincludedir)'; $(am__uninstall_files_from_dir) +install-pkgincludeHEADERS: $(pkginclude_HEADERS) + @$(NORMAL_INSTALL) + @list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(pkgincludedir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(pkgincludedir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(pkgincludedir)'"; \ + $(INSTALL_HEADER) $$files "$(DESTDIR)$(pkgincludedir)" || exit $$?; \ + done + +uninstall-pkgincludeHEADERS: + @$(NORMAL_UNINSTALL) + @list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(pkgincludedir)'; $(am__uninstall_files_from_dir) + +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-am +TAGS: tags + +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + set x; \ + here=`pwd`; \ + $(am__define_uniq_tagged_files); \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: ctags-am + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" +cscope: cscope.files + test ! -s cscope.files \ + || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) +clean-cscope: + -rm -f cscope.files +cscope.files: clean-cscope cscopelist +cscopelist: cscopelist-am + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + -rm -f cscope.out cscope.in.out cscope.po.out cscope.files + +# Recover from deleted '.trs' file; this should ensure that +# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create +# both 'foo.log' and 'foo.trs'. Break the recipe in two subshells +# to avoid problems with "make -n". +.log.trs: + rm -f $< $@ + $(MAKE) $(AM_MAKEFLAGS) $< + +# Leading 'am--fnord' is there to ensure the list of targets does not +# expand to empty, as could happen e.g. with make check TESTS=''. +am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck) +am--force-recheck: + @: + +$(TEST_SUITE_LOG): $(TEST_LOGS) + @$(am__set_TESTS_bases); \ + am__f_ok () { test -f "$$1" && test -r "$$1"; }; \ + redo_bases=`for i in $$bases; do \ + am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \ + done`; \ + if test -n "$$redo_bases"; then \ + redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \ + redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \ + if $(am__make_dryrun); then :; else \ + rm -f $$redo_logs && rm -f $$redo_results || exit 1; \ + fi; \ + fi; \ + if test -n "$$am__remaking_logs"; then \ + echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \ + "recursion detected" >&2; \ + elif test -n "$$redo_logs"; then \ + am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \ + fi; \ + if $(am__make_dryrun); then :; else \ + st=0; \ + errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \ + for i in $$redo_bases; do \ + test -f $$i.trs && test -r $$i.trs \ + || { echo "$$errmsg $$i.trs" >&2; st=1; }; \ + test -f $$i.log && test -r $$i.log \ + || { echo "$$errmsg $$i.log" >&2; st=1; }; \ + done; \ + test $$st -eq 0 || exit 1; \ + fi + @$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \ + ws='[ ]'; \ + results=`for b in $$bases; do echo $$b.trs; done`; \ + test -n "$$results" || results=/dev/null; \ + all=` grep "^$$ws*:test-result:" $$results | wc -l`; \ + pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \ + fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \ + skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \ + xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \ + xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \ + error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \ + if test `expr $$fail + $$xpass + $$error` -eq 0; then \ + success=true; \ + else \ + success=false; \ + fi; \ + br='==================='; br=$$br$$br$$br$$br; \ + result_count () \ + { \ + if test x"$$1" = x"--maybe-color"; then \ + maybe_colorize=yes; \ + elif test x"$$1" = x"--no-color"; then \ + maybe_colorize=no; \ + else \ + echo "$@: invalid 'result_count' usage" >&2; exit 4; \ + fi; \ + shift; \ + desc=$$1 count=$$2; \ + if test $$maybe_colorize = yes && test $$count -gt 0; then \ + color_start=$$3 color_end=$$std; \ + else \ + color_start= color_end=; \ + fi; \ + echo "$${color_start}# $$desc $$count$${color_end}"; \ + }; \ + create_testsuite_report () \ + { \ + result_count $$1 "TOTAL:" $$all "$$brg"; \ + result_count $$1 "PASS: " $$pass "$$grn"; \ + result_count $$1 "SKIP: " $$skip "$$blu"; \ + result_count $$1 "XFAIL:" $$xfail "$$lgn"; \ + result_count $$1 "FAIL: " $$fail "$$red"; \ + result_count $$1 "XPASS:" $$xpass "$$red"; \ + result_count $$1 "ERROR:" $$error "$$mgn"; \ + }; \ + { \ + echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \ + $(am__rst_title); \ + create_testsuite_report --no-color; \ + echo; \ + echo ".. contents:: :depth: 2"; \ + echo; \ + for b in $$bases; do echo $$b; done \ + | $(am__create_global_log); \ + } >$(TEST_SUITE_LOG).tmp || exit 1; \ + mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \ + if $$success; then \ + col="$$grn"; \ + else \ + col="$$red"; \ + test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \ + fi; \ + echo "$${col}$$br$${std}"; \ + echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \ + echo "$${col}$$br$${std}"; \ + create_testsuite_report --maybe-color; \ + echo "$$col$$br$$std"; \ + if $$success; then :; else \ + echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \ + if test -n "$(PACKAGE_BUGREPORT)"; then \ + echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \ + fi; \ + echo "$$col$$br$$std"; \ + fi; \ + $$success || exit 1 + +check-TESTS: + @list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list + @list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list + @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) + @set +e; $(am__set_TESTS_bases); \ + log_list=`for i in $$bases; do echo $$i.log; done`; \ + trs_list=`for i in $$bases; do echo $$i.trs; done`; \ + log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \ + $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \ + exit $$?; +recheck: all $(check_PROGRAMS) + @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) + @set +e; $(am__set_TESTS_bases); \ + bases=`for i in $$bases; do echo $$i; done \ + | $(am__list_recheck_tests)` || exit 1; \ + log_list=`for i in $$bases; do echo $$i.log; done`; \ + log_list=`echo $$log_list`; \ + $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \ + am__force_recheck=am--force-recheck \ + TEST_LOGS="$$log_list"; \ + exit $$? +tests/pngtest.log: tests/pngtest + @p='tests/pngtest'; \ + b='tests/pngtest'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngvalid-gamma-16-to-8.log: tests/pngvalid-gamma-16-to-8 + @p='tests/pngvalid-gamma-16-to-8'; \ + b='tests/pngvalid-gamma-16-to-8'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngvalid-gamma-alpha-mode.log: tests/pngvalid-gamma-alpha-mode + @p='tests/pngvalid-gamma-alpha-mode'; \ + b='tests/pngvalid-gamma-alpha-mode'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngvalid-gamma-background.log: tests/pngvalid-gamma-background + @p='tests/pngvalid-gamma-background'; \ + b='tests/pngvalid-gamma-background'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngvalid-gamma-expand16-alpha-mode.log: tests/pngvalid-gamma-expand16-alpha-mode + @p='tests/pngvalid-gamma-expand16-alpha-mode'; \ + b='tests/pngvalid-gamma-expand16-alpha-mode'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngvalid-gamma-expand16-background.log: tests/pngvalid-gamma-expand16-background + @p='tests/pngvalid-gamma-expand16-background'; \ + b='tests/pngvalid-gamma-expand16-background'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngvalid-gamma-expand16-transform.log: tests/pngvalid-gamma-expand16-transform + @p='tests/pngvalid-gamma-expand16-transform'; \ + b='tests/pngvalid-gamma-expand16-transform'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngvalid-gamma-sbit.log: tests/pngvalid-gamma-sbit + @p='tests/pngvalid-gamma-sbit'; \ + b='tests/pngvalid-gamma-sbit'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngvalid-gamma-threshold.log: tests/pngvalid-gamma-threshold + @p='tests/pngvalid-gamma-threshold'; \ + b='tests/pngvalid-gamma-threshold'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngvalid-gamma-transform.log: tests/pngvalid-gamma-transform + @p='tests/pngvalid-gamma-transform'; \ + b='tests/pngvalid-gamma-transform'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngvalid-progressive-size.log: tests/pngvalid-progressive-size + @p='tests/pngvalid-progressive-size'; \ + b='tests/pngvalid-progressive-size'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngvalid-progressive-interlace-standard.log: tests/pngvalid-progressive-interlace-standard + @p='tests/pngvalid-progressive-interlace-standard'; \ + b='tests/pngvalid-progressive-interlace-standard'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngvalid-transform.log: tests/pngvalid-transform + @p='tests/pngvalid-transform'; \ + b='tests/pngvalid-transform'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngvalid-progressive-standard.log: tests/pngvalid-progressive-standard + @p='tests/pngvalid-progressive-standard'; \ + b='tests/pngvalid-progressive-standard'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngvalid-standard.log: tests/pngvalid-standard + @p='tests/pngvalid-standard'; \ + b='tests/pngvalid-standard'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngstest-1.8.log: tests/pngstest-1.8 + @p='tests/pngstest-1.8'; \ + b='tests/pngstest-1.8'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngstest-1.8-alpha.log: tests/pngstest-1.8-alpha + @p='tests/pngstest-1.8-alpha'; \ + b='tests/pngstest-1.8-alpha'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngstest-linear.log: tests/pngstest-linear + @p='tests/pngstest-linear'; \ + b='tests/pngstest-linear'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngstest-linear-alpha.log: tests/pngstest-linear-alpha + @p='tests/pngstest-linear-alpha'; \ + b='tests/pngstest-linear-alpha'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngstest-none.log: tests/pngstest-none + @p='tests/pngstest-none'; \ + b='tests/pngstest-none'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngstest-none-alpha.log: tests/pngstest-none-alpha + @p='tests/pngstest-none-alpha'; \ + b='tests/pngstest-none-alpha'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngstest-sRGB.log: tests/pngstest-sRGB + @p='tests/pngstest-sRGB'; \ + b='tests/pngstest-sRGB'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngstest-sRGB-alpha.log: tests/pngstest-sRGB-alpha + @p='tests/pngstest-sRGB-alpha'; \ + b='tests/pngstest-sRGB-alpha'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngunknown-IDAT.log: tests/pngunknown-IDAT + @p='tests/pngunknown-IDAT'; \ + b='tests/pngunknown-IDAT'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngunknown-discard.log: tests/pngunknown-discard + @p='tests/pngunknown-discard'; \ + b='tests/pngunknown-discard'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngunknown-if-safe.log: tests/pngunknown-if-safe + @p='tests/pngunknown-if-safe'; \ + b='tests/pngunknown-if-safe'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngunknown-sAPI.log: tests/pngunknown-sAPI + @p='tests/pngunknown-sAPI'; \ + b='tests/pngunknown-sAPI'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngunknown-sTER.log: tests/pngunknown-sTER + @p='tests/pngunknown-sTER'; \ + b='tests/pngunknown-sTER'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngunknown-save.log: tests/pngunknown-save + @p='tests/pngunknown-save'; \ + b='tests/pngunknown-save'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngunknown-vpAg.log: tests/pngunknown-vpAg + @p='tests/pngunknown-vpAg'; \ + b='tests/pngunknown-vpAg'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngimage-quick.log: tests/pngimage-quick + @p='tests/pngimage-quick'; \ + b='tests/pngimage-quick'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +tests/pngimage-full.log: tests/pngimage-full + @p='tests/pngimage-full'; \ + b='tests/pngimage-full'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +.test.log: + @p='$<'; \ + $(am__set_b); \ + $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +@am__EXEEXT_TRUE@.test$(EXEEXT).log: +@am__EXEEXT_TRUE@ @p='$<'; \ +@am__EXEEXT_TRUE@ $(am__set_b); \ +@am__EXEEXT_TRUE@ $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \ +@am__EXEEXT_TRUE@ --log-file $$b.log --trs-file $$b.trs \ +@am__EXEEXT_TRUE@ $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \ +@am__EXEEXT_TRUE@ "$$tst" $(AM_TESTS_FD_REDIRECT) + +distdir: $(DISTFILES) + $(am__remove_distdir) + test -d "$(distdir)" || mkdir "$(distdir)" + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$(top_distdir)" distdir="$(distdir)" \ + dist-hook + -test -n "$(am__skip_mode_fix)" \ + || find "$(distdir)" -type d ! -perm -755 \ + -exec chmod u+rwx,go+rx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r "$(distdir)" +dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__post_remove_distdir) + +dist-bzip2: distdir + tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 + $(am__post_remove_distdir) + +dist-lzip: distdir + tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz + $(am__post_remove_distdir) +dist-xz: distdir + tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz + $(am__post_remove_distdir) + +dist-tarZ: distdir + @echo WARNING: "Support for distribution archives compressed with" \ + "legacy program 'compress' is deprecated." >&2 + @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__post_remove_distdir) + +dist-shar: distdir + @echo WARNING: "Support for shar distribution archives is" \ + "deprecated." >&2 + @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 + shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz + $(am__post_remove_distdir) + +dist-zip: distdir + -rm -f $(distdir).zip + zip -rq $(distdir).zip $(distdir) + $(am__post_remove_distdir) + +dist dist-all: + $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' + $(am__post_remove_distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ + bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.lz*) \ + lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ + *.tar.xz*) \ + xz -dc $(distdir).tar.xz | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + esac + chmod -R a-w $(distdir) + chmod u+w $(distdir) + mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst + chmod a-w $(distdir) + test -d $(distdir)/_build || exit 0; \ + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ + && am__cwd=`pwd` \ + && $(am__cd) $(distdir)/_build/sub \ + && ../../configure \ + $(AM_DISTCHECK_CONFIGURE_FLAGS) \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + --srcdir=../.. --prefix="$$dc_install_base" \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ + (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ + && cd "$$am__cwd" \ + || exit 1 + $(am__post_remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ + sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' +distuninstallcheck: + @test -n '$(distuninstallcheck_dir)' || { \ + echo 'ERROR: trying to run $@ with an empty' \ + '$$(distuninstallcheck_dir)' >&2; \ + exit 1; \ + }; \ + $(am__cd) '$(distuninstallcheck_dir)' || { \ + echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ + exit 1; \ + }; \ + test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ + echo " (check DESTDIR support)"; \ + fi ; \ + $(distuninstallcheck_listfiles) ; \ + exit 1; } >&2 +distcleancheck: distclean + @if test '$(srcdir)' = . ; then \ + echo "ERROR: distcleancheck can only run from a VPATH build" ; \ + exit 1 ; \ + fi + @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left in build directory after distclean:" ; \ + $(distcleancheck_listfiles) ; \ + exit 1; } >&2 +check-am: all-am + $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) + $(MAKE) $(AM_MAKEFLAGS) check-TESTS +check: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) check-am +all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(SCRIPTS) $(MANS) $(DATA) \ + $(HEADERS) config.h +install-binPROGRAMS: install-libLTLIBRARIES + +installdirs: + for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(man5dir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(pkgincludedir)" "$(DESTDIR)$(pkgincludedir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + -test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS) + -test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs) + -test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) + +clean-generic: + -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + -rm -f arm/$(DEPDIR)/$(am__dirstamp) + -rm -f arm/$(am__dirstamp) + -rm -f contrib/libtests/$(DEPDIR)/$(am__dirstamp) + -rm -f contrib/libtests/$(am__dirstamp) + -rm -f contrib/tools/$(DEPDIR)/$(am__dirstamp) + -rm -f contrib/tools/$(am__dirstamp) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." + -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) + -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) +@DO_INSTALL_LIBPNG_CONFIG_FALSE@@DO_INSTALL_LINKS_FALSE@install-exec-hook: +@DO_INSTALL_LIBPNG_PC_FALSE@@DO_INSTALL_LINKS_FALSE@install-data-hook: +@DO_INSTALL_LIBPNG_CONFIG_FALSE@@DO_INSTALL_LIBPNG_PC_FALSE@@DO_INSTALL_LINKS_FALSE@uninstall-hook: +clean: clean-am + +clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \ + clean-libLTLIBRARIES clean-libtool mostlyclean-am + +distclean: distclean-am + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf ./$(DEPDIR) arm/$(DEPDIR) contrib/libtests/$(DEPDIR) contrib/tools/$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-hdr distclean-libtool distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-man install-nodist_pkgincludeHEADERS \ + install-pkgconfigDATA install-pkgincludeHEADERS + @$(NORMAL_INSTALL) + $(MAKE) $(AM_MAKEFLAGS) install-data-hook +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: install-binPROGRAMS install-binSCRIPTS \ + install-libLTLIBRARIES + @$(NORMAL_INSTALL) + $(MAKE) $(AM_MAKEFLAGS) install-exec-hook +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: install-man3 install-man5 + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -rf ./$(DEPDIR) arm/$(DEPDIR) contrib/libtests/$(DEPDIR) contrib/tools/$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS \ + uninstall-libLTLIBRARIES uninstall-man \ + uninstall-nodist_pkgincludeHEADERS uninstall-pkgconfigDATA \ + uninstall-pkgincludeHEADERS + @$(NORMAL_INSTALL) + $(MAKE) $(AM_MAKEFLAGS) uninstall-hook +uninstall-man: uninstall-man3 uninstall-man5 + +.MAKE: all check check-am install install-am install-data-am \ + install-exec-am install-strip uninstall-am + +.PHONY: CTAGS GTAGS TAGS all all-am am--refresh check check-TESTS \ + check-am clean clean-binPROGRAMS clean-checkPROGRAMS \ + clean-cscope clean-generic clean-libLTLIBRARIES clean-libtool \ + cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \ + dist-gzip dist-hook dist-lzip dist-shar dist-tarZ dist-xz \ + dist-zip distcheck distclean distclean-compile \ + distclean-generic distclean-hdr distclean-libtool \ + distclean-tags distcleancheck distdir distuninstallcheck dvi \ + dvi-am html html-am info info-am install install-am \ + install-binPROGRAMS install-binSCRIPTS install-data \ + install-data-am install-data-hook install-dvi install-dvi-am \ + install-exec install-exec-am install-exec-hook install-html \ + install-html-am install-info install-info-am \ + install-libLTLIBRARIES install-man install-man3 install-man5 \ + install-nodist_pkgincludeHEADERS install-pdf install-pdf-am \ + install-pkgconfigDATA install-pkgincludeHEADERS install-ps \ + install-ps-am install-strip installcheck installcheck-am \ + installdirs maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool pdf pdf-am ps ps-am recheck tags tags-am \ + uninstall uninstall-am uninstall-binPROGRAMS \ + uninstall-binSCRIPTS uninstall-hook uninstall-libLTLIBRARIES \ + uninstall-man uninstall-man3 uninstall-man5 \ + uninstall-nodist_pkgincludeHEADERS uninstall-pkgconfigDATA \ + uninstall-pkgincludeHEADERS + +.PRECIOUS: Makefile + + +$(PNGLIB_BASENAME).pc: libpng.pc + cp libpng.pc $@ + +$(PNGLIB_BASENAME)-config: libpng-config + cp libpng-config $@ + +scripts/sym.out scripts/vers.out: png.h pngconf.h pnglibconf.h +scripts/prefix.out: png.h pngconf.h pnglibconf.out +scripts/symbols.out: png.h pngconf.h $(srcdir)/scripts/pnglibconf.h.prebuilt +scripts/intprefix.out: pnglibconf.h + +libpng.sym: scripts/sym.out + rm -f $@ + cp $? $@ +libpng.vers: scripts/vers.out + rm -f $@ + cp $? $@ + +# Rename functions in scripts/prefix.out with a PNG_PREFIX prefix. +# Rename macros in scripts/macro.lst from PNG_PREFIXpng_ to PNG_ (the actual +# implementation of the macro). +@DO_PNG_PREFIX_TRUE@pnglibconf.h: pnglibconf.out scripts/prefix.out scripts/macro.lst +@DO_PNG_PREFIX_TRUE@ rm -f $@ +@DO_PNG_PREFIX_TRUE@ $(AWK) 's==0 && NR>1{print prev}\ +@DO_PNG_PREFIX_TRUE@ s==0{prev=$$0}\ +@DO_PNG_PREFIX_TRUE@ s==1{print "#define", $$1, "@PNG_PREFIX@" $$1}\ +@DO_PNG_PREFIX_TRUE@ s==2{print "#define @PNG_PREFIX@png_" $$1, "PNG_" $$1}\ +@DO_PNG_PREFIX_TRUE@ END{print prev}' s=0 pnglibconf.out s=1 scripts/prefix.out\ +@DO_PNG_PREFIX_TRUE@ s=2 ${srcdir}/scripts/macro.lst >pnglibconf.tf8 +@DO_PNG_PREFIX_TRUE@ mv pnglibconf.tf8 $@ + +@DO_PNG_PREFIX_TRUE@pngprefix.h: scripts/intprefix.out +@DO_PNG_PREFIX_TRUE@ rm -f pngprefix.tf1 +@DO_PNG_PREFIX_TRUE@ $(AWK) '{print "#define", $$1, "@PNG_PREFIX@" $$1}' $? >pngprefix.tf1 +@DO_PNG_PREFIX_TRUE@ mv pngprefix.tf1 $@ +@DO_PNG_PREFIX_FALSE@pnglibconf.h: pnglibconf.out +@DO_PNG_PREFIX_FALSE@ rm -f $@ +@DO_PNG_PREFIX_FALSE@ cp $? $@ + +@DO_PNG_PREFIX_FALSE@pngprefix.h: # is empty +@DO_PNG_PREFIX_FALSE@ :>$@ + +$(srcdir)/scripts/pnglibconf.h.prebuilt: + @echo "Attempting to build $@" >&2 + @echo "This is a machine generated file, but if you want to make" >&2 + @echo "a new one simply make 'scripts/pnglibconf.out', copy that" >&2 + @echo "AND set PNG_ZLIB_VERNUM to 0 (you MUST do this)" >&2 + @exit 1 + +# The following is necessary to ensure that the local pnglibconf.h is used, not +# an installed one (this can happen immediately after on a clean system if +# 'make test' is the first thing the user does.) Only files which include +# one of the png source files (typically png.h or pngpriv.h) need to be listed +# here: +pngtest.o: pnglibconf.h + +contrib/libtests/makepng.o: pnglibconf.h +contrib/libtests/pngstest.o: pnglibconf.h +contrib/libtests/pngunknown.o: pnglibconf.h +contrib/libtests/pngimage.o: pnglibconf.h +contrib/libtests/pngvalid.o: pnglibconf.h +contrib/libtests/readpng.o: pnglibconf.h +contrib/libtests/tarith.o: pnglibconf.h +contrib/libtests/timepng.o: pnglibconf.h + +contrib/tools/makesRGB.o: pnglibconf.h +contrib/tools/pngfix.o: pnglibconf.h + +.c.out: + rm -f $@ $*.tf[12] + test -d scripts || mkdir scripts || test -d scripts + $(DFNCPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES)\ + $(CPPFLAGS) $(SYMBOL_CFLAGS) $< > $*.tf1 + $(AWK) -f "${srcdir}/scripts/dfn.awk" out="$*.tf2" $*.tf1 1>&2 + rm -f $*.tf1 + mv $*.tf2 $@ + +# The .c file for pnglibconf.h is machine generated +pnglibconf.c: scripts/pnglibconf.dfa scripts/options.awk pngconf.h pngusr.dfa $(DFA_XTRA) + rm -f $@ $*.tf[45] + $(AWK) -f ${srcdir}/scripts/options.awk out=$*.tf4 version=search\ + ${srcdir}/pngconf.h ${srcdir}/scripts/pnglibconf.dfa\ + ${srcdir}/pngusr.dfa $(DFA_XTRA) 1>&2 + $(AWK) -f ${srcdir}/scripts/options.awk out=$*.tf5 $*.tf4 1>&2 + rm $*.tf4 + mv $*.tf5 $@ + +# Symbol checks (.def and .out files should match) +scripts/symbols.chk: scripts/checksym.awk scripts/symbols.def scripts/symbols.out + +.out.chk: + rm -f $@ $*.new + $(AWK) -f ${srcdir}/scripts/checksym.awk ${srcdir}/scripts/${*F}.def\ + of="$*.new" $< >&2 + mv $*.new $@ + +# used on demand to regenerate the standard header, CPPFLAGS should +# be empty - no non-standard defines +scripts/pnglibconf.c: scripts/pnglibconf.dfa scripts/options.awk pngconf.h + rm -f $@ pnglibconf.tf[67] + test -z "$(CPPFLAGS)" + echo "com @PNGLIB_VERSION@ STANDARD API DEFINITION" |\ + $(AWK) -f ${srcdir}/scripts/options.awk out=pnglibconf.tf6\ + logunsupported=1 version=search ${srcdir}/pngconf.h -\ + ${srcdir}/scripts/pnglibconf.dfa 1>&2 + $(AWK) -f ${srcdir}/scripts/options.awk out=pnglibconf.tf7\ + pnglibconf.tf6 1>&2 + rm pnglibconf.tf6 + mv pnglibconf.tf7 $@ + +$(libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_OBJECTS): png.h pngconf.h \ + pnglibconf.h pngpriv.h pngdebug.h pnginfo.h pngstruct.h pngprefix.h + +test: check-am + +# Extra checks +check: scripts/symbols.chk + +# Don't distribute the generated script files +dist-hook: + cd '$(top_distdir)'; rm -f $(SCRIPT_CLEANFILES) + +# Make links between installed files with release-specific names and the generic +# file names. If this install rule is run the generic names will be deleted and +# recreated - this has obvious issues for systems with multiple installations. + +install-header-links: + @set -ex; cd '$(DESTDIR)$(includedir)'; for f in $(HEADERS); do \ + rm -f "$$f"; $(LN_S) "$(PNGLIB_BASENAME)/$$f" "$$f"; done + +uninstall-header-links: + cd '$(DESTDIR)$(includedir)'; rm -f $(HEADERS) + +install-libpng-pc: + @set -ex; cd '$(DESTDIR)$(pkgconfigdir)'; rm -f libpng.pc; \ + $(LN_S) '$(PNGLIB_BASENAME).pc' libpng.pc + +uninstall-libpng-pc: + rm -f '$(DESTDIR)$(pkgconfigdir)/libpng.pc' + +install-library-links: + @set -x; cd '$(DESTDIR)$(libdir)';\ + for ext in $(EXT_LIST); do\ + rm -f "libpng.$$ext";\ + if test -f "$(PNGLIB_BASENAME).$$ext"; then\ + $(LN_S) "$(PNGLIB_BASENAME).$$ext" "libpng.$$ext" || exit 1;\ + fi;\ + done + +uninstall-library-links: + @set -x; cd '$(DESTDIR)$(libdir)'; for ext in $(EXT_LIST); do\ + rm -f "libpng.$$ext"; done + +install-libpng-config: + @set -ex; cd '$(DESTDIR)$(bindir)'; rm -f libpng-config; \ + $(LN_S) '$(PNGLIB_BASENAME)-config' libpng-config + +uninstall-libpng-config: + rm -f '$(DESTDIR)$(bindir)/libpng-config' + +# If --enable-unversioned-links is specified the header and lib file links +# will be automatically made on a 'make install': + +@DO_INSTALL_LINKS_TRUE@install-data-hook: install-header-links +@DO_INSTALL_LINKS_TRUE@uninstall-hook: uninstall-header-links +@DO_INSTALL_LINKS_TRUE@install-exec-hook: install-library-links +@DO_INSTALL_LINKS_TRUE@uninstall-hook: uninstall-library-links + +# Likewise, --install-pc causes libpng.pc to be constructed: + +@DO_INSTALL_LIBPNG_PC_TRUE@install-data-hook: install-libpng-pc +@DO_INSTALL_LIBPNG_PC_TRUE@uninstall-hook: uninstall-libpng-pc + +# And --install-config: + +@DO_INSTALL_LIBPNG_CONFIG_TRUE@install-exec-hook: install-libpng-config +@DO_INSTALL_LIBPNG_CONFIG_TRUE@uninstall-hook: uninstall-libpng-config + +# The following addition ensures that 'make all' always builds the test programs +# too. It used to, but some change either in libpng or configure stopped this +# working. +all-am: $(check_PROGRAMS) + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/compat/libpng/README b/compat/libpng/README new file mode 100755 index 0000000..0cf1726 --- /dev/null +++ b/compat/libpng/README @@ -0,0 +1,215 @@ +README for libpng version 1.6.21 - January 15, 2016 (shared library 16.0) +See the note about version numbers near the top of png.h + +See INSTALL for instructions on how to install libpng. + +Libpng comes in several distribution formats. Get libpng-*.tar.gz or +libpng-*.tar.xz or if you want UNIX-style line endings in the text files, +or lpng*.7z or lpng*.zip if you want DOS-style line endings. + +Version 0.89 was the first official release of libpng. Don't let the +fact that it's the first release fool you. The libpng library has been in +extensive use and testing since mid-1995. By late 1997 it had +finally gotten to the stage where there hadn't been significant +changes to the API in some time, and people have a bad feeling about +libraries with versions < 1.0. Version 1.0.0 was released in +March 1998. + +**** +Note that some of the changes to the png_info structure render this +version of the library binary incompatible with libpng-0.89 or +earlier versions if you are using a shared library. The type of the +"filler" parameter for png_set_filler() has changed from png_byte to +png_uint_32, which will affect shared-library applications that use +this function. + +To avoid problems with changes to the internals of png info_struct, +new APIs have been made available in 0.95 to avoid direct application +access to info_ptr. These functions are the png_set_ and +png_get_ functions. These functions should be used when +accessing/storing the info_struct data, rather than manipulating it +directly, to avoid such problems in the future. + +It is important to note that the APIs did not make current programs +that access the info struct directly incompatible with the new +library, through libpng-1.2.x. In libpng-1.4.x, which was meant to +be a transitional release, members of the png_struct and the +info_struct can still be accessed, but the compiler will issue a +warning about deprecated usage. Since libpng-1.5.0, direct access +to these structs is not allowed, and the definitions of the structs +reside in private pngstruct.h and pnginfo.h header files that are not +accessible to applications. It is strongly suggested that new +programs use the new APIs (as shown in example.c and pngtest.c), and +older programs be converted to the new format, to facilitate upgrades +in the future. +**** + +Additions since 0.90 include the ability to compile libpng as a +Windows DLL, and new APIs for accessing data in the info struct. +Experimental functions include the ability to set weighting and cost +factors for row filter selection, direct reads of integers from buffers +on big-endian processors that support misaligned data access, faster +methods of doing alpha composition, and more accurate 16->8 bit color +conversion. + +The additions since 0.89 include the ability to read from a PNG stream +which has had some (or all) of the signature bytes read by the calling +application. This also allows the reading of embedded PNG streams that +do not have the PNG file signature. As well, it is now possible to set +the library action on the detection of chunk CRC errors. It is possible +to set different actions based on whether the CRC error occurred in a +critical or an ancillary chunk. + +The changes made to the library, and bugs fixed are based on discussions +on the PNG-implement mailing list and not on material submitted +privately to Guy, Andreas, or Glenn. They will forward any good +suggestions to the list. + +For a detailed description on using libpng, read libpng-manual.txt. For +examples of libpng in a program, see example.c and pngtest.c. For usage +information and restrictions (what little they are) on libpng, see +png.h. For a description on using zlib (the compression library used by +libpng) and zlib's restrictions, see zlib.h + +I have included a general makefile, as well as several machine and +compiler specific ones, but you may have to modify one for your own needs. + +You should use zlib 1.0.4 or later to run this, but it MAY work with +versions as old as zlib 0.95. Even so, there are bugs in older zlib +versions which can cause the output of invalid compression streams for +some images. You will definitely need zlib 1.0.4 or later if you are +taking advantage of the MS-DOS "far" structure allocation for the small +and medium memory models. You should also note that zlib is a +compression library that is useful for more things than just PNG files. +You can use zlib as a drop-in replacement for fread() and fwrite() if +you are so inclined. + +zlib should be available at the same place that libpng is, or at zlib.net. + +You may also want a copy of the PNG specification. It is available +as an RFC, a W3C Recommendation, and an ISO/IEC Standard. You can find +these at http://www.libpng.org/pub/png/documents/ + +This code is currently being archived at libpng.sf.net in the +[DOWNLOAD] area, and at ftp://ftp.simplesystems.org. If you can't find it +in any of those places, e-mail me, and I'll help you find it. + +I am not a lawyer, but I believe that the Export Control Classification +Number (ECCN) for libpng is EAR99, which means not subject to export +controls or International Traffic in Arms Regulations (ITAR) because it +is open source, publicly available software, that does not contain any +encryption software. See the EAR, paragraphs 734.3(b)(3) and 734.7(b). + +If you have any code changes, requests, problems, etc., please e-mail +them to me. Also, I'd appreciate any make files or project files, +and any modifications you needed to make to get libpng to compile, +along with a #define variable to tell what compiler/system you are on. +If you needed to add transformations to libpng, or wish libpng would +provide the image in a different way, drop me a note (and code, if +possible), so I can consider supporting the transformation. +Finally, if you get any warning messages when compiling libpng +(note: not zlib), and they are easy to fix, I'd appreciate the +fix. Please mention "libpng" somewhere in the subject line. Thanks. + +This release was created and will be supported by myself (of course +based in a large way on Guy's and Andreas' earlier work), and the PNG +development group. + +Send comments/corrections/commendations to png-mng-implement at +lists.sourceforge.net (subscription required; visit +https://lists.sourceforge.net/lists/listinfo/png-mng-implement +to subscribe) or to glennrp at users.sourceforge.net + +You can't reach Guy, the original libpng author, at the addresses +given in previous versions of this document. He and Andreas will +read mail addressed to the png-implement list, however. + +Please do not send general questions about PNG. Send them to +png-mng-misc at lists.sf.net (subscription required; visit +https://lists.sourceforge.net/lists/listinfo/png-mng-misc to +subscribe). If you have a question about something +in the PNG specification that is related to using libpng, send it +to me. Send me any questions that start with "I was using libpng, +and ...". If in doubt, send questions to me. I'll bounce them +to others, if necessary. + +Please do not send suggestions on how to change PNG. We have +been discussing PNG for twenty years now, and it is official and +finished. If you have suggestions for libpng, however, I'll +gladly listen. Even if your suggestion is not used immediately, +it may be used later. + +Files in this distribution: + + ANNOUNCE => Announcement of this version, with recent changes + CHANGES => Description of changes between libpng versions + KNOWNBUG => List of known bugs and deficiencies + LICENSE => License to use and redistribute libpng + README => This file + TODO => Things not implemented in the current library + Y2KINFO => Statement of Y2K compliance + example.c => Example code for using libpng functions + libpng.3 => manual page for libpng (includes libpng-manual.txt) + libpng-manual.txt => Description of libpng and its functions + libpngpf.3 => manual page for libpng's private functions + png.5 => manual page for the PNG format + png.c => Basic interface functions common to library + png.h => Library function and interface declarations (public) + pngpriv.h => Library function and interface declarations (private) + pngconf.h => System specific library configuration (public) + pngstruct.h => png_struct declaration (private) + pnginfo.h => png_info struct declaration (private) + pngdebug.h => debugging macros (private) + pngerror.c => Error/warning message I/O functions + pngget.c => Functions for retrieving info from struct + pngmem.c => Memory handling functions + pngbar.png => PNG logo, 88x31 + pngnow.png => PNG logo, 98x31 + pngpread.c => Progressive reading functions + pngread.c => Read data/helper high-level functions + pngrio.c => Lowest-level data read I/O functions + pngrtran.c => Read data transformation functions + pngrutil.c => Read data utility functions + pngset.c => Functions for storing data into the info_struct + pngtest.c => Library test program + pngtest.png => Library test sample image + pngtrans.c => Common data transformation functions + pngwio.c => Lowest-level write I/O functions + pngwrite.c => High-level write functions + pngwtran.c => Write data transformations + pngwutil.c => Write utility functions + arm => Contains optimized code for the ARM platform + contrib => Contributions + examples => Example programs + gregbook => source code for PNG reading and writing, from + Greg Roelofs' "PNG: The Definitive Guide", + O'Reilly, 1999 + libtests => Test programs + pngminim => Minimal decoder, encoder, and progressive decoder + programs demonstrating use of pngusr.dfa + pngminus => Simple pnm2png and png2pnm programs + pngsuite => Test images + tools => Various tools + visupng => Contains a MSVC workspace for VisualPng + projects => Contains project files and workspaces for + building a DLL + owatcom => Contains a WATCOM project for building libpng + visualc71 => Contains a Microsoft Visual C++ (MSVC) + workspace for building libpng and zlib + vstudio => Contains a Microsoft Visual C++ (MSVC) + workspace for building libpng and zlib + scripts => Directory containing scripts for building libpng: + (see scripts/README.txt for the list of scripts) + +Good luck, and happy coding. + +-Glenn Randers-Pehrson (current maintainer, since 1998) + Internet: glennrp at users.sourceforge.net + +-Andreas Eric Dilger (former maintainer, 1996-1997) + Internet: adilger at enel.ucalgary.ca + Web: http://www-mddsp.enel.ucalgary.ca/People/adilger/ + +-Guy Eric Schalnat (original author and former maintainer, 1995-1996) + (formerly of Group 42, Inc) + Internet: gschal at infinet.com diff --git a/compat/libpng/TODO b/compat/libpng/TODO new file mode 100755 index 0000000..fc18bba --- /dev/null +++ b/compat/libpng/TODO @@ -0,0 +1,29 @@ +/* +TODO - list of things to do for libpng: + +Final bug fixes. +Better C++ wrapper/full C++ implementation? +Fix problem with C++ and EXTERN "C". +cHRM transformation. +Remove setjmp/longjmp usage in favor of returning error codes. +Palette creation. +Add "grayscale->palette" transformation and "palette->grayscale" detection. +Improved dithering. +Multi-lingual error and warning message support. +Complete sRGB transformation (presently it simply uses gamma=0.45455). +Make profile checking optional via a png_set_something() call. +Man pages for function calls. +Better documentation. +Better filter selection + (counting huffman bits/precompression? filter inertia? filter costs?). +Histogram creation. +Text conversion between different code pages (Latin-1 -> Mac and DOS). +Avoid building gamma tables whenever possible. +Use greater precision when changing to linear gamma for compositing against + background and doing rgb-to-gray transformation. +Investigate pre-incremented loop counters and other loop constructions. +Add interpolated method of handling interlacing. +Switch to the simpler zlib (zlib/libpng) license if legally possible. +Extend pngvalid.c to validate more of the libpng transformations. + +*/ diff --git a/compat/libpng/aclocal.m4 b/compat/libpng/aclocal.m4 new file mode 100755 index 0000000..b70e15c --- /dev/null +++ b/compat/libpng/aclocal.m4 @@ -0,0 +1,1213 @@ +# generated automatically by aclocal 1.15 -*- Autoconf -*- + +# Copyright (C) 1996-2014 Free Software Foundation, Inc. + +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, +[m4_warning([this file was generated for autoconf 2.69. +You have another version of autoconf. It may work, but is not guaranteed to. +If you have problems, you may need to regenerate the build system entirely. +To do so, use the procedure documented by the package, typically 'autoreconf'.])]) + +# Copyright (C) 2002-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_AUTOMAKE_VERSION(VERSION) +# ---------------------------- +# Automake X.Y traces this macro to ensure aclocal.m4 has been +# generated from the m4 files accompanying Automake X.Y. +# (This private macro should not be called outside this file.) +AC_DEFUN([AM_AUTOMAKE_VERSION], +[am__api_version='1.15' +dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to +dnl require some minimum version. Point them to the right macro. +m4_if([$1], [1.15], [], + [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl +]) + +# _AM_AUTOCONF_VERSION(VERSION) +# ----------------------------- +# aclocal traces this macro to find the Autoconf version. +# This is a private macro too. Using m4_define simplifies +# the logic in aclocal, which can simply ignore this definition. +m4_define([_AM_AUTOCONF_VERSION], []) + +# AM_SET_CURRENT_AUTOMAKE_VERSION +# ------------------------------- +# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. +# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], +[AM_AUTOMAKE_VERSION([1.15])dnl +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) + +# Figure out how to run the assembler. -*- Autoconf -*- + +# Copyright (C) 2001-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_AS +# ---------- +AC_DEFUN([AM_PROG_AS], +[# By default we simply use the C compiler to build assembly code. +AC_REQUIRE([AC_PROG_CC]) +test "${CCAS+set}" = set || CCAS=$CC +test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS +AC_ARG_VAR([CCAS], [assembler compiler command (defaults to CC)]) +AC_ARG_VAR([CCASFLAGS], [assembler compiler flags (defaults to CFLAGS)]) +_AM_IF_OPTION([no-dependencies],, [_AM_DEPENDENCIES([CCAS])])dnl +]) + +# AM_AUX_DIR_EXPAND -*- Autoconf -*- + +# Copyright (C) 2001-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to +# '$srcdir', '$srcdir/..', or '$srcdir/../..'. +# +# Of course, Automake must honor this variable whenever it calls a +# tool from the auxiliary directory. The problem is that $srcdir (and +# therefore $ac_aux_dir as well) can be either absolute or relative, +# depending on how configure is run. This is pretty annoying, since +# it makes $ac_aux_dir quite unusable in subdirectories: in the top +# source directory, any form will work fine, but in subdirectories a +# relative path needs to be adjusted first. +# +# $ac_aux_dir/missing +# fails when called from a subdirectory if $ac_aux_dir is relative +# $top_srcdir/$ac_aux_dir/missing +# fails if $ac_aux_dir is absolute, +# fails when called from a subdirectory in a VPATH build with +# a relative $ac_aux_dir +# +# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +# are both prefixed by $srcdir. In an in-source build this is usually +# harmless because $srcdir is '.', but things will broke when you +# start a VPATH build or use an absolute $srcdir. +# +# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` +# and then we would define $MISSING as +# MISSING="\${SHELL} $am_aux_dir/missing" +# This will work as long as MISSING is not called from configure, because +# unfortunately $(top_srcdir) has no meaning in configure. +# However there are other variables, like CC, which are often used in +# configure, and could therefore not use this "fixed" $ac_aux_dir. +# +# Another solution, used here, is to always expand $ac_aux_dir to an +# absolute PATH. The drawback is that using absolute paths prevent a +# configured tree to be moved without reconfiguration. + +AC_DEFUN([AM_AUX_DIR_EXPAND], +[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl +# Expand $ac_aux_dir to an absolute path. +am_aux_dir=`cd "$ac_aux_dir" && pwd` +]) + +# AM_CONDITIONAL -*- Autoconf -*- + +# Copyright (C) 1997-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_CONDITIONAL(NAME, SHELL-CONDITION) +# ------------------------------------- +# Define a conditional. +AC_DEFUN([AM_CONDITIONAL], +[AC_PREREQ([2.52])dnl + m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_SUBST([$1_TRUE])dnl +AC_SUBST([$1_FALSE])dnl +_AM_SUBST_NOTMAKE([$1_TRUE])dnl +_AM_SUBST_NOTMAKE([$1_FALSE])dnl +m4_define([_AM_COND_VALUE_$1], [$2])dnl +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi +AC_CONFIG_COMMANDS_PRE( +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) +fi])]) + +# Copyright (C) 1999-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + + +# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be +# written in clear, in which case automake, when reading aclocal.m4, +# will think it sees a *use*, and therefore will trigger all it's +# C support machinery. Also note that it means that autoscan, seeing +# CC etc. in the Makefile, will ask for an AC_PROG_CC use... + + +# _AM_DEPENDENCIES(NAME) +# ---------------------- +# See how the compiler implements dependency checking. +# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC". +# We try a few techniques and use that to set a single cache variable. +# +# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was +# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular +# dependency, and given that the user is not expected to run this macro, +# just rely on AC_PROG_CC. +AC_DEFUN([_AM_DEPENDENCIES], +[AC_REQUIRE([AM_SET_DEPDIR])dnl +AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl +AC_REQUIRE([AM_MAKE_INCLUDE])dnl +AC_REQUIRE([AM_DEP_TRACK])dnl + +m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], + [$1], [CXX], [depcc="$CXX" am_compiler_list=], + [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], + [$1], [UPC], [depcc="$UPC" am_compiler_list=], + [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) + +AC_CACHE_CHECK([dependency style of $depcc], + [am_cv_$1_dependencies_compiler_type], +[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_$1_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` + fi + am__universal=false + m4_case([$1], [CC], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac], + [CXX], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac]) + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_$1_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_$1_dependencies_compiler_type=none +fi +]) +AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) +AM_CONDITIONAL([am__fastdep$1], [ + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) +]) + + +# AM_SET_DEPDIR +# ------------- +# Choose a directory name for dependency files. +# This macro is AC_REQUIREd in _AM_DEPENDENCIES. +AC_DEFUN([AM_SET_DEPDIR], +[AC_REQUIRE([AM_SET_LEADING_DOT])dnl +AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl +]) + + +# AM_DEP_TRACK +# ------------ +AC_DEFUN([AM_DEP_TRACK], +[AC_ARG_ENABLE([dependency-tracking], [dnl +AS_HELP_STRING( + [--enable-dependency-tracking], + [do not reject slow dependency extractors]) +AS_HELP_STRING( + [--disable-dependency-tracking], + [speeds up one-time build])]) +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + am__nodep='_no' +fi +AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +AC_SUBST([AMDEPBACKSLASH])dnl +_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl +AC_SUBST([am__nodep])dnl +_AM_SUBST_NOTMAKE([am__nodep])dnl +]) + +# Generate code to set up dependency tracking. -*- Autoconf -*- + +# Copyright (C) 1999-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + + +# _AM_OUTPUT_DEPENDENCY_COMMANDS +# ------------------------------ +AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], +[{ + # Older Autoconf quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named 'Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running 'make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "$am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} +])# _AM_OUTPUT_DEPENDENCY_COMMANDS + + +# AM_OUTPUT_DEPENDENCY_COMMANDS +# ----------------------------- +# This macro should only be invoked once -- use via AC_REQUIRE. +# +# This code is only required when automatic dependency tracking +# is enabled. FIXME. This creates each '.P' file that we will +# need in order to bootstrap the dependency handling code. +AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], +[AC_CONFIG_COMMANDS([depfiles], + [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], + [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) +]) + +# Do all the work for Automake. -*- Autoconf -*- + +# Copyright (C) 1996-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This macro actually does too much. Some checks are only needed if +# your package does certain things. But this isn't really a big deal. + +dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O. +m4_define([AC_PROG_CC], +m4_defn([AC_PROG_CC]) +[_AM_PROG_CC_C_O +]) + +# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) +# AM_INIT_AUTOMAKE([OPTIONS]) +# ----------------------------------------------- +# The call with PACKAGE and VERSION arguments is the old style +# call (pre autoconf-2.50), which is being phased out. PACKAGE +# and VERSION should now be passed to AC_INIT and removed from +# the call to AM_INIT_AUTOMAKE. +# We support both call styles for the transition. After +# the next Automake release, Autoconf can make the AC_INIT +# arguments mandatory, and then we can depend on a new Autoconf +# release and drop the old call support. +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_PREREQ([2.65])dnl +dnl Autoconf wants to disallow AM_ names. We explicitly allow +dnl the ones we care about. +m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +AC_REQUIRE([AC_PROG_INSTALL])dnl +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi +AC_SUBST([CYGPATH_W]) + +# Define the identity of the package. +dnl Distinguish between old-style and new-style calls. +m4_ifval([$2], +[AC_DIAGNOSE([obsolete], + [$0: two- and three-arguments forms are deprecated.]) +m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], +[_AM_SET_OPTIONS([$1])dnl +dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. +m4_if( + m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), + [ok:ok],, + [m4_fatal([AC_INIT should be called with package and version arguments])])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +_AM_IF_OPTION([no-define],, +[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) + AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl + +# Some tools Automake needs. +AC_REQUIRE([AM_SANITY_CHECK])dnl +AC_REQUIRE([AC_ARG_PROGRAM])dnl +AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) +AM_MISSING_PROG([AUTOCONF], [autoconf]) +AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) +AM_MISSING_PROG([AUTOHEADER], [autoheader]) +AM_MISSING_PROG([MAKEINFO], [makeinfo]) +AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl +AC_REQUIRE([AC_PROG_MKDIR_P])dnl +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# +# +AC_SUBST([mkdir_p], ['$(MKDIR_P)']) +# We need awk for the "check" target (and possibly the TAP driver). The +# system "awk" is bad on some platforms. +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_SET_LEADING_DOT])dnl +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) +_AM_IF_OPTION([no-dependencies],, +[AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES([CC])], + [m4_define([AC_PROG_CC], + m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES([CXX])], + [m4_define([AC_PROG_CXX], + m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJC], + [_AM_DEPENDENCIES([OBJC])], + [m4_define([AC_PROG_OBJC], + m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], + [_AM_DEPENDENCIES([OBJCXX])], + [m4_define([AC_PROG_OBJCXX], + m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl +]) +AC_REQUIRE([AM_SILENT_RULES])dnl +dnl The testsuite driver may need to know about EXEEXT, so add the +dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This +dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. +AC_CONFIG_COMMANDS_PRE(dnl +[m4_provide_if([_AM_COMPILER_EXEEXT], + [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl + +# POSIX will say in a future version that running "rm -f" with no argument +# is OK; and we want to be able to make that assumption in our Makefile +# recipes. So use an aggressive probe to check that the usage we want is +# actually supported "in the wild" to an acceptable degree. +# See automake bug#10828. +# To make any issue more visible, cause the running configure to be aborted +# by default if the 'rm' program in use doesn't match our expectations; the +# user can still override this though. +if rm -f && rm -fr && rm -rf; then : OK; else + cat >&2 <<'END' +Oops! + +Your 'rm' program seems unable to run without file operands specified +on the command line, even when the '-f' option is present. This is contrary +to the behaviour of most rm programs out there, and not conforming with +the upcoming POSIX standard: + +Please tell bug-automake@gnu.org about your system, including the value +of your $PATH and any error possibly output before this message. This +can help us improve future automake versions. + +END + if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then + echo 'Configuration will proceed anyway, since you have set the' >&2 + echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 + echo >&2 + else + cat >&2 <<'END' +Aborting the configuration process, to ensure you take notice of the issue. + +You can download and install GNU coreutils to get an 'rm' implementation +that behaves properly: . + +If you want to complete the configuration process using your problematic +'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM +to "yes", and re-run configure. + +END + AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) + fi +fi +dnl The trailing newline in this macro's definition is deliberate, for +dnl backward compatibility and to allow trailing 'dnl'-style comments +dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841. +]) + +dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not +dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further +dnl mangled by Autoconf and run in a shell conditional statement. +m4_define([_AC_COMPILER_EXEEXT], +m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) + +# When config.status generates a header, we must update the stamp-h file. +# This file resides in the same directory as the config header +# that is generated. The stamp files are numbered to have different names. + +# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +# loop where config.status creates the headers, so we can generate +# our stamp files there. +AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +[# Compute $1's index in $config_headers. +_am_arg=$1 +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) + +# Copyright (C) 2001-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_SH +# ------------------ +# Define $install_sh. +AC_DEFUN([AM_PROG_INSTALL_SH], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +if test x"${install_sh+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi +AC_SUBST([install_sh])]) + +# Copyright (C) 2003-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# Check whether the underlying file-system supports filenames +# with a leading dot. For instance MS-DOS doesn't. +AC_DEFUN([AM_SET_LEADING_DOT], +[rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null +AC_SUBST([am__leading_dot])]) + +# Add --enable-maintainer-mode option to configure. -*- Autoconf -*- +# From Jim Meyering + +# Copyright (C) 1996-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_MAINTAINER_MODE([DEFAULT-MODE]) +# ---------------------------------- +# Control maintainer-specific portions of Makefiles. +# Default is to disable them, unless 'enable' is passed literally. +# For symmetry, 'disable' may be passed as well. Anyway, the user +# can override the default with the --enable/--disable switch. +AC_DEFUN([AM_MAINTAINER_MODE], +[m4_case(m4_default([$1], [disable]), + [enable], [m4_define([am_maintainer_other], [disable])], + [disable], [m4_define([am_maintainer_other], [enable])], + [m4_define([am_maintainer_other], [enable]) + m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])]) +AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) + dnl maintainer-mode's default is 'disable' unless 'enable' is passed + AC_ARG_ENABLE([maintainer-mode], + [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode], + am_maintainer_other[ make rules and dependencies not useful + (and sometimes confusing) to the casual installer])], + [USE_MAINTAINER_MODE=$enableval], + [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes])) + AC_MSG_RESULT([$USE_MAINTAINER_MODE]) + AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes]) + MAINT=$MAINTAINER_MODE_TRUE + AC_SUBST([MAINT])dnl +] +) + +# Check to see how 'make' treats includes. -*- Autoconf -*- + +# Copyright (C) 2001-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_MAKE_INCLUDE() +# ----------------- +# Check to see how make treats includes. +AC_DEFUN([AM_MAKE_INCLUDE], +[am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +AC_MSG_CHECKING([for style of include used by $am_make]) +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from 'make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi +AC_SUBST([am__include]) +AC_SUBST([am__quote]) +AC_MSG_RESULT([$_am_result]) +rm -f confinc confmf +]) + +# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + +# Copyright (C) 1997-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_MISSING_PROG(NAME, PROGRAM) +# ------------------------------ +AC_DEFUN([AM_MISSING_PROG], +[AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) + +# AM_MISSING_HAS_RUN +# ------------------ +# Define MISSING if not defined so far and test if it is modern enough. +# If it is, set am_missing_run to use it, otherwise, to nothing. +AC_DEFUN([AM_MISSING_HAS_RUN], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([missing])dnl +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --is-lightweight"; then + am_missing_run="$MISSING " +else + am_missing_run= + AC_MSG_WARN(['missing' script is too old or missing]) +fi +]) + +# Helper functions for option handling. -*- Autoconf -*- + +# Copyright (C) 2001-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_MANGLE_OPTION(NAME) +# ----------------------- +AC_DEFUN([_AM_MANGLE_OPTION], +[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) + +# _AM_SET_OPTION(NAME) +# -------------------- +# Set option NAME. Presently that only means defining a flag for this option. +AC_DEFUN([_AM_SET_OPTION], +[m4_define(_AM_MANGLE_OPTION([$1]), [1])]) + +# _AM_SET_OPTIONS(OPTIONS) +# ------------------------ +# OPTIONS is a space-separated list of Automake options. +AC_DEFUN([_AM_SET_OPTIONS], +[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) + +# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) +# ------------------------------------------- +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +AC_DEFUN([_AM_IF_OPTION], +[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +# Copyright (C) 1999-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_PROG_CC_C_O +# --------------- +# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC +# to automatically call this. +AC_DEFUN([_AM_PROG_CC_C_O], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([compile])dnl +AC_LANG_PUSH([C])dnl +AC_CACHE_CHECK( + [whether $CC understands -c and -o together], + [am_cv_prog_cc_c_o], + [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])]) + # Make sure it works both with $CC and with simple cc. + # Following AC_PROG_CC_C_O, we do the test twice because some + # compilers refuse to overwrite an existing .o file with -o, + # though they will create one. + am_cv_prog_cc_c_o=yes + for am_i in 1 2; do + if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \ + && test -f conftest2.$ac_objext; then + : OK + else + am_cv_prog_cc_c_o=no + break + fi + done + rm -f core conftest* + unset am_i]) +if test "$am_cv_prog_cc_c_o" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi +AC_LANG_POP([C])]) + +# For backward compatibility. +AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) + +# Copyright (C) 2001-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_RUN_LOG(COMMAND) +# ------------------- +# Run COMMAND, save the exit status in ac_status, and log it. +# (This has been adapted from Autoconf's _AC_RUN_LOG macro.) +AC_DEFUN([AM_RUN_LOG], +[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD + ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + (exit $ac_status); }]) + +# Check to make sure that the build environment is sane. -*- Autoconf -*- + +# Copyright (C) 1996-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_SANITY_CHECK +# --------------- +AC_DEFUN([AM_SANITY_CHECK], +[AC_MSG_CHECKING([whether build environment is sane]) +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[[\\\"\#\$\&\'\`$am_lf]]*) + AC_MSG_ERROR([unsafe absolute working directory name]);; +esac +case $srcdir in + *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) + AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; +esac + +# Do 'set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + am_has_slept=no + for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken + alias in your environment]) + fi + if test "$[2]" = conftest.file || test $am_try -eq 2; then + break + fi + # Just in case. + sleep 1 + am_has_slept=yes + done + test "$[2]" = conftest.file + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +AC_MSG_RESULT([yes]) +# If we didn't sleep, we still need to ensure time stamps of config.status and +# generated files are strictly newer. +am_sleep_pid= +if grep 'slept: no' conftest.file >/dev/null 2>&1; then + ( sleep 1 ) & + am_sleep_pid=$! +fi +AC_CONFIG_COMMANDS_PRE( + [AC_MSG_CHECKING([that generated files are newer than configure]) + if test -n "$am_sleep_pid"; then + # Hide warnings about reused PIDs. + wait $am_sleep_pid 2>/dev/null + fi + AC_MSG_RESULT([done])]) +rm -f conftest.file +]) + +# Copyright (C) 2009-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_SILENT_RULES([DEFAULT]) +# -------------------------- +# Enable less verbose build rules; with the default set to DEFAULT +# ("yes" being less verbose, "no" or empty being verbose). +AC_DEFUN([AM_SILENT_RULES], +[AC_ARG_ENABLE([silent-rules], [dnl +AS_HELP_STRING( + [--enable-silent-rules], + [less verbose build output (undo: "make V=1")]) +AS_HELP_STRING( + [--disable-silent-rules], + [verbose build output (undo: "make V=0")])dnl +]) +case $enable_silent_rules in @%:@ ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; +esac +dnl +dnl A few 'make' implementations (e.g., NonStop OS and NextStep) +dnl do not support nested variable expansions. +dnl See automake bug#9928 and bug#10237. +am_make=${MAKE-make} +AC_CACHE_CHECK([whether $am_make supports nested variables], + [am_cv_make_support_nested_variables], + [if AS_ECHO([['TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi]) +if test $am_cv_make_support_nested_variables = yes; then + dnl Using '$V' instead of '$(V)' breaks IRIX make. + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AC_SUBST([AM_V])dnl +AM_SUBST_NOTMAKE([AM_V])dnl +AC_SUBST([AM_DEFAULT_V])dnl +AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl +AC_SUBST([AM_DEFAULT_VERBOSITY])dnl +AM_BACKSLASH='\' +AC_SUBST([AM_BACKSLASH])dnl +_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl +]) + +# Copyright (C) 2001-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_STRIP +# --------------------- +# One issue with vendor 'install' (even GNU) is that you can't +# specify the program used to strip binaries. This is especially +# annoying in cross-compiling environments, where the build's strip +# is unlikely to handle the host's binaries. +# Fortunately install-sh will honor a STRIPPROG variable, so we +# always use install-sh in "make install-strip", and initialize +# STRIPPROG with the value of the STRIP variable (set by the user). +AC_DEFUN([AM_PROG_INSTALL_STRIP], +[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the 'STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. +if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" +AC_SUBST([INSTALL_STRIP_PROGRAM])]) + +# Copyright (C) 2006-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_SUBST_NOTMAKE(VARIABLE) +# --------------------------- +# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. +# This macro is traced by Automake. +AC_DEFUN([_AM_SUBST_NOTMAKE]) + +# AM_SUBST_NOTMAKE(VARIABLE) +# -------------------------- +# Public sister of _AM_SUBST_NOTMAKE. +AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) + +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of 'v7', 'ustar', or 'pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +# +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AC_SUBST([AMTAR], ['$${TAR-tar}']) + +# We'll loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' + +m4_if([$1], [v7], + [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], + + [m4_case([$1], + [ustar], + [# The POSIX 1988 'ustar' format is defined with fixed-size fields. + # There is notably a 21 bits limit for the UID and the GID. In fact, + # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 + # and bug#13588). + am_max_uid=2097151 # 2^21 - 1 + am_max_gid=$am_max_uid + # The $UID and $GID variables are not portable, so we need to resort + # to the POSIX-mandated id(1) utility. Errors in the 'id' calls + # below are definitely unexpected, so allow the users to see them + # (that is, avoid stderr redirection). + am_uid=`id -u || echo unknown` + am_gid=`id -g || echo unknown` + AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) + if test $am_uid -le $am_max_uid; then + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + _am_tools=none + fi + AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) + if test $am_gid -le $am_max_gid; then + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + _am_tools=none + fi], + + [pax], + [], + + [m4_fatal([Unknown tar format])]) + + AC_MSG_CHECKING([how to create a $1 tar archive]) + + # Go ahead even if we have the value already cached. We do so because we + # need to set the values for the 'am__tar' and 'am__untar' variables. + _am_tools=${am_cv_prog_tar_$1-$_am_tools} + + for _am_tool in $_am_tools; do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works. + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi + done + rm -rf conftest.dir + + AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) + AC_MSG_RESULT([$am_cv_prog_tar_$1])]) + +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR + +m4_include([scripts/libtool.m4]) +m4_include([scripts/ltoptions.m4]) +m4_include([scripts/ltsugar.m4]) +m4_include([scripts/ltversion.m4]) +m4_include([scripts/lt~obsolete.m4]) diff --git a/compat/libpng/arm/arm_init.c b/compat/libpng/arm/arm_init.c new file mode 100755 index 0000000..fb3d50d --- /dev/null +++ b/compat/libpng/arm/arm_init.c @@ -0,0 +1,134 @@ + +/* arm_init.c - NEON optimised filter functions + * + * Copyright (c) 2014 Glenn Randers-Pehrson + * Written by Mans Rullgard, 2011. + * Last changed in libpng 1.6.16 [December 22, 2014] + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + */ +/* Below, after checking __linux__, various non-C90 POSIX 1003.1 functions are + * called. + */ +#define _POSIX_SOURCE 1 + +#include "../pngpriv.h" + +#ifdef PNG_READ_SUPPORTED + +#if PNG_ARM_NEON_OPT > 0 +#ifdef PNG_ARM_NEON_CHECK_SUPPORTED /* Do run-time checks */ +/* WARNING: it is strongly recommended that you do not build libpng with + * run-time checks for CPU features if at all possible. In the case of the ARM + * NEON instructions there is no processor-specific way of detecting the + * presence of the required support, therefore run-time detection is extremely + * OS specific. + * + * You may set the macro PNG_ARM_NEON_FILE to the file name of file containing + * a fragment of C source code which defines the png_have_neon function. There + * are a number of implementations in contrib/arm-neon, but the only one that + * has partial support is contrib/arm-neon/linux.c - a generic Linux + * implementation which reads /proc/cpufino. + */ +#ifndef PNG_ARM_NEON_FILE +# ifdef __linux__ +# define PNG_ARM_NEON_FILE "contrib/arm-neon/linux.c" +# endif +#endif + +#ifdef PNG_ARM_NEON_FILE + +#include /* for sig_atomic_t */ +static int png_have_neon(png_structp png_ptr); +#include PNG_ARM_NEON_FILE + +#else /* PNG_ARM_NEON_FILE */ +# error "PNG_ARM_NEON_FILE undefined: no support for run-time ARM NEON checks" +#endif /* PNG_ARM_NEON_FILE */ +#endif /* PNG_ARM_NEON_CHECK_SUPPORTED */ + +#ifndef PNG_ALIGNED_MEMORY_SUPPORTED +# error "ALIGNED_MEMORY is required; set: -DPNG_ALIGNED_MEMORY_SUPPORTED" +#endif + +void +png_init_filter_functions_neon(png_structp pp, unsigned int bpp) +{ + /* The switch statement is compiled in for ARM_NEON_API, the call to + * png_have_neon is compiled in for ARM_NEON_CHECK. If both are defined + * the check is only performed if the API has not set the NEON option on + * or off explicitly. In this case the check controls what happens. + * + * If the CHECK is not compiled in and the option is UNSET the behavior prior + * to 1.6.7 was to use the NEON code - this was a bug caused by having the + * wrong order of the 'ON' and 'default' cases. UNSET now defaults to OFF, + * as documented in png.h + */ +#ifdef PNG_ARM_NEON_API_SUPPORTED + switch ((pp->options >> PNG_ARM_NEON) & 3) + { + case PNG_OPTION_UNSET: + /* Allow the run-time check to execute if it has been enabled - + * thus both API and CHECK can be turned on. If it isn't supported + * this case will fall through to the 'default' below, which just + * returns. + */ +#endif /* PNG_ARM_NEON_API_SUPPORTED */ +#ifdef PNG_ARM_NEON_CHECK_SUPPORTED + { + static volatile sig_atomic_t no_neon = -1; /* not checked */ + + if (no_neon < 0) + no_neon = !png_have_neon(pp); + + if (no_neon) + return; + } +#ifdef PNG_ARM_NEON_API_SUPPORTED + break; +#endif +#endif /* PNG_ARM_NEON_CHECK_SUPPORTED */ + +#ifdef PNG_ARM_NEON_API_SUPPORTED + default: /* OFF or INVALID */ + return; + + case PNG_OPTION_ON: + /* Option turned on */ + break; + } +#endif + + /* IMPORTANT: any new external functions used here must be declared using + * PNG_INTERNAL_FUNCTION in ../pngpriv.h. This is required so that the + * 'prefix' option to configure works: + * + * ./configure --with-libpng-prefix=foobar_ + * + * Verify you have got this right by running the above command, doing a build + * and examining pngprefix.h; it must contain a #define for every external + * function you add. (Notice that this happens automatically for the + * initialization function.) + */ + pp->read_filter[PNG_FILTER_VALUE_UP-1] = png_read_filter_row_up_neon; + + if (bpp == 3) + { + pp->read_filter[PNG_FILTER_VALUE_SUB-1] = png_read_filter_row_sub3_neon; + pp->read_filter[PNG_FILTER_VALUE_AVG-1] = png_read_filter_row_avg3_neon; + pp->read_filter[PNG_FILTER_VALUE_PAETH-1] = + png_read_filter_row_paeth3_neon; + } + + else if (bpp == 4) + { + pp->read_filter[PNG_FILTER_VALUE_SUB-1] = png_read_filter_row_sub4_neon; + pp->read_filter[PNG_FILTER_VALUE_AVG-1] = png_read_filter_row_avg4_neon; + pp->read_filter[PNG_FILTER_VALUE_PAETH-1] = + png_read_filter_row_paeth4_neon; + } +} +#endif /* PNG_ARM_NEON_OPT > 0 */ +#endif /* READ */ diff --git a/compat/libpng/arm/filter_neon.S b/compat/libpng/arm/filter_neon.S new file mode 100755 index 0000000..3b061d6 --- /dev/null +++ b/compat/libpng/arm/filter_neon.S @@ -0,0 +1,253 @@ + +/* filter_neon.S - NEON optimised filter functions + * + * Copyright (c) 2014 Glenn Randers-Pehrson + * Written by Mans Rullgard, 2011. + * Last changed in libpng 1.6.16 [December 22, 2014] + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + */ + +/* This is required to get the symbol renames, which are #defines, and the + * definitions (or not) of PNG_ARM_NEON_OPT and PNG_ARM_NEON_IMPLEMENTATION. + */ +#define PNG_VERSION_INFO_ONLY +#include "../pngpriv.h" + +#if defined(__linux__) && defined(__ELF__) +.section .note.GNU-stack,"",%progbits /* mark stack as non-executable */ +#endif + +#ifdef PNG_READ_SUPPORTED + +/* Assembler NEON support - only works for 32-bit ARM (i.e. it does not work for + * ARM64). The code in arm/filter_neon_intrinsics.c supports ARM64, however it + * only works if -mfpu=neon is specified on the GCC command line. See pngpriv.h + * for the logic which sets PNG_USE_ARM_NEON_ASM: + */ +#if PNG_ARM_NEON_IMPLEMENTATION == 2 /* hand-coded assembler */ + +#if PNG_ARM_NEON_OPT > 0 + +#ifdef __ELF__ +# define ELF +#else +# define ELF @ +#endif + + .arch armv7-a + .fpu neon + +.macro func name, export=0 + .macro endfunc +ELF .size \name, . - \name + .endfunc + .purgem endfunc + .endm + .text + + /* Explicitly specifying alignment here because some versions of + * GAS don't align code correctly. This is harmless in correctly + * written versions of GAS. + */ + .align 2 + + .if \export + .global \name + .endif +ELF .type \name, STT_FUNC + .func \name +\name: +.endm + +func png_read_filter_row_sub4_neon, export=1 + ldr r3, [r0, #4] @ rowbytes + vmov.i8 d3, #0 +1: + vld4.32 {d4[],d5[],d6[],d7[]}, [r1,:128] + vadd.u8 d0, d3, d4 + vadd.u8 d1, d0, d5 + vadd.u8 d2, d1, d6 + vadd.u8 d3, d2, d7 + vst4.32 {d0[0],d1[0],d2[0],d3[0]},[r1,:128]! + subs r3, r3, #16 + bgt 1b + + bx lr +endfunc + +func png_read_filter_row_sub3_neon, export=1 + ldr r3, [r0, #4] @ rowbytes + vmov.i8 d3, #0 + mov r0, r1 + mov r2, #3 + mov r12, #12 + vld1.8 {q11}, [r0], r12 +1: + vext.8 d5, d22, d23, #3 + vadd.u8 d0, d3, d22 + vext.8 d6, d22, d23, #6 + vadd.u8 d1, d0, d5 + vext.8 d7, d23, d23, #1 + vld1.8 {q11}, [r0], r12 + vst1.32 {d0[0]}, [r1,:32], r2 + vadd.u8 d2, d1, d6 + vst1.32 {d1[0]}, [r1], r2 + vadd.u8 d3, d2, d7 + vst1.32 {d2[0]}, [r1], r2 + vst1.32 {d3[0]}, [r1], r2 + subs r3, r3, #12 + bgt 1b + + bx lr +endfunc + +func png_read_filter_row_up_neon, export=1 + ldr r3, [r0, #4] @ rowbytes +1: + vld1.8 {q0}, [r1,:128] + vld1.8 {q1}, [r2,:128]! + vadd.u8 q0, q0, q1 + vst1.8 {q0}, [r1,:128]! + subs r3, r3, #16 + bgt 1b + + bx lr +endfunc + +func png_read_filter_row_avg4_neon, export=1 + ldr r12, [r0, #4] @ rowbytes + vmov.i8 d3, #0 +1: + vld4.32 {d4[],d5[],d6[],d7[]}, [r1,:128] + vld4.32 {d16[],d17[],d18[],d19[]},[r2,:128]! + vhadd.u8 d0, d3, d16 + vadd.u8 d0, d0, d4 + vhadd.u8 d1, d0, d17 + vadd.u8 d1, d1, d5 + vhadd.u8 d2, d1, d18 + vadd.u8 d2, d2, d6 + vhadd.u8 d3, d2, d19 + vadd.u8 d3, d3, d7 + vst4.32 {d0[0],d1[0],d2[0],d3[0]},[r1,:128]! + subs r12, r12, #16 + bgt 1b + + bx lr +endfunc + +func png_read_filter_row_avg3_neon, export=1 + push {r4,lr} + ldr r12, [r0, #4] @ rowbytes + vmov.i8 d3, #0 + mov r0, r1 + mov r4, #3 + mov lr, #12 + vld1.8 {q11}, [r0], lr +1: + vld1.8 {q10}, [r2], lr + vext.8 d5, d22, d23, #3 + vhadd.u8 d0, d3, d20 + vext.8 d17, d20, d21, #3 + vadd.u8 d0, d0, d22 + vext.8 d6, d22, d23, #6 + vhadd.u8 d1, d0, d17 + vext.8 d18, d20, d21, #6 + vadd.u8 d1, d1, d5 + vext.8 d7, d23, d23, #1 + vld1.8 {q11}, [r0], lr + vst1.32 {d0[0]}, [r1,:32], r4 + vhadd.u8 d2, d1, d18 + vst1.32 {d1[0]}, [r1], r4 + vext.8 d19, d21, d21, #1 + vadd.u8 d2, d2, d6 + vhadd.u8 d3, d2, d19 + vst1.32 {d2[0]}, [r1], r4 + vadd.u8 d3, d3, d7 + vst1.32 {d3[0]}, [r1], r4 + subs r12, r12, #12 + bgt 1b + + pop {r4,pc} +endfunc + +.macro paeth rx, ra, rb, rc + vaddl.u8 q12, \ra, \rb @ a + b + vaddl.u8 q15, \rc, \rc @ 2*c + vabdl.u8 q13, \rb, \rc @ pa + vabdl.u8 q14, \ra, \rc @ pb + vabd.u16 q15, q12, q15 @ pc + vcle.u16 q12, q13, q14 @ pa <= pb + vcle.u16 q13, q13, q15 @ pa <= pc + vcle.u16 q14, q14, q15 @ pb <= pc + vand q12, q12, q13 @ pa <= pb && pa <= pc + vmovn.u16 d28, q14 + vmovn.u16 \rx, q12 + vbsl d28, \rb, \rc + vbsl \rx, \ra, d28 +.endm + +func png_read_filter_row_paeth4_neon, export=1 + ldr r12, [r0, #4] @ rowbytes + vmov.i8 d3, #0 + vmov.i8 d20, #0 +1: + vld4.32 {d4[],d5[],d6[],d7[]}, [r1,:128] + vld4.32 {d16[],d17[],d18[],d19[]},[r2,:128]! + paeth d0, d3, d16, d20 + vadd.u8 d0, d0, d4 + paeth d1, d0, d17, d16 + vadd.u8 d1, d1, d5 + paeth d2, d1, d18, d17 + vadd.u8 d2, d2, d6 + paeth d3, d2, d19, d18 + vmov d20, d19 + vadd.u8 d3, d3, d7 + vst4.32 {d0[0],d1[0],d2[0],d3[0]},[r1,:128]! + subs r12, r12, #16 + bgt 1b + + bx lr +endfunc + +func png_read_filter_row_paeth3_neon, export=1 + push {r4,lr} + ldr r12, [r0, #4] @ rowbytes + vmov.i8 d3, #0 + vmov.i8 d4, #0 + mov r0, r1 + mov r4, #3 + mov lr, #12 + vld1.8 {q11}, [r0], lr +1: + vld1.8 {q10}, [r2], lr + paeth d0, d3, d20, d4 + vext.8 d5, d22, d23, #3 + vadd.u8 d0, d0, d22 + vext.8 d17, d20, d21, #3 + paeth d1, d0, d17, d20 + vst1.32 {d0[0]}, [r1,:32], r4 + vext.8 d6, d22, d23, #6 + vadd.u8 d1, d1, d5 + vext.8 d18, d20, d21, #6 + paeth d2, d1, d18, d17 + vext.8 d7, d23, d23, #1 + vld1.8 {q11}, [r0], lr + vst1.32 {d1[0]}, [r1], r4 + vadd.u8 d2, d2, d6 + vext.8 d19, d21, d21, #1 + paeth d3, d2, d19, d18 + vst1.32 {d2[0]}, [r1], r4 + vmov d4, d19 + vadd.u8 d3, d3, d7 + vst1.32 {d3[0]}, [r1], r4 + subs r12, r12, #12 + bgt 1b + + pop {r4,pc} +endfunc +#endif /* PNG_ARM_NEON_OPT > 0 */ +#endif /* PNG_ARM_NEON_IMPLEMENTATION == 2 (assembler) */ +#endif /* READ */ diff --git a/compat/libpng/arm/filter_neon_intrinsics.c b/compat/libpng/arm/filter_neon_intrinsics.c new file mode 100755 index 0000000..d42c788 --- /dev/null +++ b/compat/libpng/arm/filter_neon_intrinsics.c @@ -0,0 +1,373 @@ + +/* filter_neon_intrinsics.c - NEON optimised filter functions + * + * Copyright (c) 2014 Glenn Randers-Pehrson + * Written by James Yu , October 2013. + * Based on filter_neon.S, written by Mans Rullgard, 2011. + * + * Last changed in libpng 1.6.16 [December 22, 2014] + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + */ + +#include "../pngpriv.h" + +#ifdef PNG_READ_SUPPORTED + +/* This code requires -mfpu=neon on the command line: */ +#if PNG_ARM_NEON_IMPLEMENTATION == 1 /* intrinsics code from pngpriv.h */ + +#include + +/* libpng row pointers are not necessarily aligned to any particular boundary, + * however this code will only work with appropriate alignment. arm/arm_init.c + * checks for this (and will not compile unless it is done). This code uses + * variants of png_aligncast to avoid compiler warnings. + */ +#define png_ptr(type,pointer) png_aligncast(type *,pointer) +#define png_ptrc(type,pointer) png_aligncastconst(const type *,pointer) + +/* The following relies on a variable 'temp_pointer' being declared with type + * 'type'. This is written this way just to hide the GCC strict aliasing + * warning; note that the code is safe because there never is an alias between + * the input and output pointers. + */ +#define png_ldr(type,pointer)\ + (temp_pointer = png_ptr(type,pointer), *temp_pointer) + +#if PNG_ARM_NEON_OPT > 0 + +void +png_read_filter_row_up_neon(png_row_infop row_info, png_bytep row, + png_const_bytep prev_row) +{ + png_bytep rp = row; + png_bytep rp_stop = row + row_info->rowbytes; + png_const_bytep pp = prev_row; + + for (; rp < rp_stop; rp += 16, pp += 16) + { + uint8x16_t qrp, qpp; + + qrp = vld1q_u8(rp); + qpp = vld1q_u8(pp); + qrp = vaddq_u8(qrp, qpp); + vst1q_u8(rp, qrp); + } +} + +void +png_read_filter_row_sub3_neon(png_row_infop row_info, png_bytep row, + png_const_bytep prev_row) +{ + png_bytep rp = row; + png_bytep rp_stop = row + row_info->rowbytes; + + uint8x16_t vtmp = vld1q_u8(rp); + uint8x8x2_t *vrpt = png_ptr(uint8x8x2_t, &vtmp); + uint8x8x2_t vrp = *vrpt; + + uint8x8x4_t vdest; + vdest.val[3] = vdup_n_u8(0); + + for (; rp < rp_stop;) + { + uint8x8_t vtmp1, vtmp2; + uint32x2_t *temp_pointer; + + vtmp1 = vext_u8(vrp.val[0], vrp.val[1], 3); + vdest.val[0] = vadd_u8(vdest.val[3], vrp.val[0]); + vtmp2 = vext_u8(vrp.val[0], vrp.val[1], 6); + vdest.val[1] = vadd_u8(vdest.val[0], vtmp1); + + vtmp1 = vext_u8(vrp.val[1], vrp.val[1], 1); + vdest.val[2] = vadd_u8(vdest.val[1], vtmp2); + vdest.val[3] = vadd_u8(vdest.val[2], vtmp1); + + vtmp = vld1q_u8(rp + 12); + vrpt = png_ptr(uint8x8x2_t, &vtmp); + vrp = *vrpt; + + vst1_lane_u32(png_ptr(uint32_t,rp), png_ldr(uint32x2_t,&vdest.val[0]), 0); + rp += 3; + vst1_lane_u32(png_ptr(uint32_t,rp), png_ldr(uint32x2_t,&vdest.val[1]), 0); + rp += 3; + vst1_lane_u32(png_ptr(uint32_t,rp), png_ldr(uint32x2_t,&vdest.val[2]), 0); + rp += 3; + vst1_lane_u32(png_ptr(uint32_t,rp), png_ldr(uint32x2_t,&vdest.val[3]), 0); + rp += 3; + } + + PNG_UNUSED(prev_row) +} + +void +png_read_filter_row_sub4_neon(png_row_infop row_info, png_bytep row, + png_const_bytep prev_row) +{ + png_bytep rp = row; + png_bytep rp_stop = row + row_info->rowbytes; + + uint8x8x4_t vdest; + vdest.val[3] = vdup_n_u8(0); + + for (; rp < rp_stop; rp += 16) + { + uint32x2x4_t vtmp = vld4_u32(png_ptr(uint32_t,rp)); + uint8x8x4_t *vrpt = png_ptr(uint8x8x4_t,&vtmp); + uint8x8x4_t vrp = *vrpt; + uint32x2x4_t *temp_pointer; + + vdest.val[0] = vadd_u8(vdest.val[3], vrp.val[0]); + vdest.val[1] = vadd_u8(vdest.val[0], vrp.val[1]); + vdest.val[2] = vadd_u8(vdest.val[1], vrp.val[2]); + vdest.val[3] = vadd_u8(vdest.val[2], vrp.val[3]); + vst4_lane_u32(png_ptr(uint32_t,rp), png_ldr(uint32x2x4_t,&vdest), 0); + } + + PNG_UNUSED(prev_row) +} + +void +png_read_filter_row_avg3_neon(png_row_infop row_info, png_bytep row, + png_const_bytep prev_row) +{ + png_bytep rp = row; + png_const_bytep pp = prev_row; + png_bytep rp_stop = row + row_info->rowbytes; + + uint8x16_t vtmp; + uint8x8x2_t *vrpt; + uint8x8x2_t vrp; + uint8x8x4_t vdest; + vdest.val[3] = vdup_n_u8(0); + + vtmp = vld1q_u8(rp); + vrpt = png_ptr(uint8x8x2_t,&vtmp); + vrp = *vrpt; + + for (; rp < rp_stop; pp += 12) + { + uint8x8_t vtmp1, vtmp2, vtmp3; + + uint8x8x2_t *vppt; + uint8x8x2_t vpp; + + uint32x2_t *temp_pointer; + + vtmp = vld1q_u8(pp); + vppt = png_ptr(uint8x8x2_t,&vtmp); + vpp = *vppt; + + vtmp1 = vext_u8(vrp.val[0], vrp.val[1], 3); + vdest.val[0] = vhadd_u8(vdest.val[3], vpp.val[0]); + vdest.val[0] = vadd_u8(vdest.val[0], vrp.val[0]); + + vtmp2 = vext_u8(vpp.val[0], vpp.val[1], 3); + vtmp3 = vext_u8(vrp.val[0], vrp.val[1], 6); + vdest.val[1] = vhadd_u8(vdest.val[0], vtmp2); + vdest.val[1] = vadd_u8(vdest.val[1], vtmp1); + + vtmp2 = vext_u8(vpp.val[0], vpp.val[1], 6); + vtmp1 = vext_u8(vrp.val[1], vrp.val[1], 1); + + vtmp = vld1q_u8(rp + 12); + vrpt = png_ptr(uint8x8x2_t,&vtmp); + vrp = *vrpt; + + vdest.val[2] = vhadd_u8(vdest.val[1], vtmp2); + vdest.val[2] = vadd_u8(vdest.val[2], vtmp3); + + vtmp2 = vext_u8(vpp.val[1], vpp.val[1], 1); + + vdest.val[3] = vhadd_u8(vdest.val[2], vtmp2); + vdest.val[3] = vadd_u8(vdest.val[3], vtmp1); + + vst1_lane_u32(png_ptr(uint32_t,rp), png_ldr(uint32x2_t,&vdest.val[0]), 0); + rp += 3; + vst1_lane_u32(png_ptr(uint32_t,rp), png_ldr(uint32x2_t,&vdest.val[1]), 0); + rp += 3; + vst1_lane_u32(png_ptr(uint32_t,rp), png_ldr(uint32x2_t,&vdest.val[2]), 0); + rp += 3; + vst1_lane_u32(png_ptr(uint32_t,rp), png_ldr(uint32x2_t,&vdest.val[3]), 0); + rp += 3; + } +} + +void +png_read_filter_row_avg4_neon(png_row_infop row_info, png_bytep row, + png_const_bytep prev_row) +{ + png_bytep rp = row; + png_bytep rp_stop = row + row_info->rowbytes; + png_const_bytep pp = prev_row; + + uint8x8x4_t vdest; + vdest.val[3] = vdup_n_u8(0); + + for (; rp < rp_stop; rp += 16, pp += 16) + { + uint32x2x4_t vtmp; + uint8x8x4_t *vrpt, *vppt; + uint8x8x4_t vrp, vpp; + uint32x2x4_t *temp_pointer; + + vtmp = vld4_u32(png_ptr(uint32_t,rp)); + vrpt = png_ptr(uint8x8x4_t,&vtmp); + vrp = *vrpt; + vtmp = vld4_u32(png_ptrc(uint32_t,pp)); + vppt = png_ptr(uint8x8x4_t,&vtmp); + vpp = *vppt; + + vdest.val[0] = vhadd_u8(vdest.val[3], vpp.val[0]); + vdest.val[0] = vadd_u8(vdest.val[0], vrp.val[0]); + vdest.val[1] = vhadd_u8(vdest.val[0], vpp.val[1]); + vdest.val[1] = vadd_u8(vdest.val[1], vrp.val[1]); + vdest.val[2] = vhadd_u8(vdest.val[1], vpp.val[2]); + vdest.val[2] = vadd_u8(vdest.val[2], vrp.val[2]); + vdest.val[3] = vhadd_u8(vdest.val[2], vpp.val[3]); + vdest.val[3] = vadd_u8(vdest.val[3], vrp.val[3]); + + vst4_lane_u32(png_ptr(uint32_t,rp), png_ldr(uint32x2x4_t,&vdest), 0); + } +} + +static uint8x8_t +paeth(uint8x8_t a, uint8x8_t b, uint8x8_t c) +{ + uint8x8_t d, e; + uint16x8_t p1, pa, pb, pc; + + p1 = vaddl_u8(a, b); /* a + b */ + pc = vaddl_u8(c, c); /* c * 2 */ + pa = vabdl_u8(b, c); /* pa */ + pb = vabdl_u8(a, c); /* pb */ + pc = vabdq_u16(p1, pc); /* pc */ + + p1 = vcleq_u16(pa, pb); /* pa <= pb */ + pa = vcleq_u16(pa, pc); /* pa <= pc */ + pb = vcleq_u16(pb, pc); /* pb <= pc */ + + p1 = vandq_u16(p1, pa); /* pa <= pb && pa <= pc */ + + d = vmovn_u16(pb); + e = vmovn_u16(p1); + + d = vbsl_u8(d, b, c); + e = vbsl_u8(e, a, d); + + return e; +} + +void +png_read_filter_row_paeth3_neon(png_row_infop row_info, png_bytep row, + png_const_bytep prev_row) +{ + png_bytep rp = row; + png_const_bytep pp = prev_row; + png_bytep rp_stop = row + row_info->rowbytes; + + uint8x16_t vtmp; + uint8x8x2_t *vrpt; + uint8x8x2_t vrp; + uint8x8_t vlast = vdup_n_u8(0); + uint8x8x4_t vdest; + vdest.val[3] = vdup_n_u8(0); + + vtmp = vld1q_u8(rp); + vrpt = png_ptr(uint8x8x2_t,&vtmp); + vrp = *vrpt; + + for (; rp < rp_stop; pp += 12) + { + uint8x8x2_t *vppt; + uint8x8x2_t vpp; + uint8x8_t vtmp1, vtmp2, vtmp3; + uint32x2_t *temp_pointer; + + vtmp = vld1q_u8(pp); + vppt = png_ptr(uint8x8x2_t,&vtmp); + vpp = *vppt; + + vdest.val[0] = paeth(vdest.val[3], vpp.val[0], vlast); + vdest.val[0] = vadd_u8(vdest.val[0], vrp.val[0]); + + vtmp1 = vext_u8(vrp.val[0], vrp.val[1], 3); + vtmp2 = vext_u8(vpp.val[0], vpp.val[1], 3); + vdest.val[1] = paeth(vdest.val[0], vtmp2, vpp.val[0]); + vdest.val[1] = vadd_u8(vdest.val[1], vtmp1); + + vtmp1 = vext_u8(vrp.val[0], vrp.val[1], 6); + vtmp3 = vext_u8(vpp.val[0], vpp.val[1], 6); + vdest.val[2] = paeth(vdest.val[1], vtmp3, vtmp2); + vdest.val[2] = vadd_u8(vdest.val[2], vtmp1); + + vtmp1 = vext_u8(vrp.val[1], vrp.val[1], 1); + vtmp2 = vext_u8(vpp.val[1], vpp.val[1], 1); + + vtmp = vld1q_u8(rp + 12); + vrpt = png_ptr(uint8x8x2_t,&vtmp); + vrp = *vrpt; + + vdest.val[3] = paeth(vdest.val[2], vtmp2, vtmp3); + vdest.val[3] = vadd_u8(vdest.val[3], vtmp1); + + vlast = vtmp2; + + vst1_lane_u32(png_ptr(uint32_t,rp), png_ldr(uint32x2_t,&vdest.val[0]), 0); + rp += 3; + vst1_lane_u32(png_ptr(uint32_t,rp), png_ldr(uint32x2_t,&vdest.val[1]), 0); + rp += 3; + vst1_lane_u32(png_ptr(uint32_t,rp), png_ldr(uint32x2_t,&vdest.val[2]), 0); + rp += 3; + vst1_lane_u32(png_ptr(uint32_t,rp), png_ldr(uint32x2_t,&vdest.val[3]), 0); + rp += 3; + } +} + +void +png_read_filter_row_paeth4_neon(png_row_infop row_info, png_bytep row, + png_const_bytep prev_row) +{ + png_bytep rp = row; + png_bytep rp_stop = row + row_info->rowbytes; + png_const_bytep pp = prev_row; + + uint8x8_t vlast = vdup_n_u8(0); + uint8x8x4_t vdest; + vdest.val[3] = vdup_n_u8(0); + + for (; rp < rp_stop; rp += 16, pp += 16) + { + uint32x2x4_t vtmp; + uint8x8x4_t *vrpt, *vppt; + uint8x8x4_t vrp, vpp; + uint32x2x4_t *temp_pointer; + + vtmp = vld4_u32(png_ptr(uint32_t,rp)); + vrpt = png_ptr(uint8x8x4_t,&vtmp); + vrp = *vrpt; + vtmp = vld4_u32(png_ptrc(uint32_t,pp)); + vppt = png_ptr(uint8x8x4_t,&vtmp); + vpp = *vppt; + + vdest.val[0] = paeth(vdest.val[3], vpp.val[0], vlast); + vdest.val[0] = vadd_u8(vdest.val[0], vrp.val[0]); + vdest.val[1] = paeth(vdest.val[0], vpp.val[1], vpp.val[0]); + vdest.val[1] = vadd_u8(vdest.val[1], vrp.val[1]); + vdest.val[2] = paeth(vdest.val[1], vpp.val[2], vpp.val[1]); + vdest.val[2] = vadd_u8(vdest.val[2], vrp.val[2]); + vdest.val[3] = paeth(vdest.val[2], vpp.val[3], vpp.val[2]); + vdest.val[3] = vadd_u8(vdest.val[3], vrp.val[3]); + + vlast = vpp.val[3]; + + vst4_lane_u32(png_ptr(uint32_t,rp), png_ldr(uint32x2x4_t,&vdest), 0); + } +} + +#endif /* PNG_ARM_NEON_OPT > 0 */ +#endif /* PNG_ARM_NEON_IMPLEMENTATION == 1 (intrinsics) */ +#endif /* READ */ diff --git a/compat/libpng/autogen.sh b/compat/libpng/autogen.sh new file mode 100755 index 0000000..ba3a715 --- /dev/null +++ b/compat/libpng/autogen.sh @@ -0,0 +1,225 @@ +#! /bin/sh +# +# Run 'autoreconf' to build 'configure', 'Makefile.in' and other configure +# control files. +# +# The first time this is run on a GIT checkout the only files that exist are +# configure.ac and Makefile.am; all of the autotools support scripts are +# missing. They are instantiated with autoreconf --force --install. +# +# For regular ("tarball") distributions all the files should exist. We do not +# want them to be updated *under any circumstances*. It should never be +# necessary to run autogen.sh because ./configure --enable-maintainer-mode says +# what to do if Makefile.am or configure.ac are changed. +# +# It is *probably* OK to update the files on a GIT checkout, because they have +# come from the local tools, but leave that to the user who is assumed to know +# whether it is ok or required. +# +# This script is intended to work without arguments, there are, however, hidden +# arguments (a) for use while testing the script and (b) to fix up systems that +# have been broken. If (b) is required the script prompts for the correct +# options. For this reason the options are *NOT* documented in the help; this +# is deliberate; UTSL. +# +clean= +maintainer= +while test $# -gt 0 +do + case "$1" in + --maintainer) + maintainer=1;; + + --clean) + clean=1;; + + *) + exec >&2 + echo "$0: usage: ./autogen.sh" + if test -d .git + then + echo " ./autogen.sh generates the configure script and" + echo " Makefile.in, or refreshes them after changes to Makefile.am" + echo " or configure.ac. You may prefer to just run autoreconf." + elif test -z "$maintainer" + then + echo " DO NOT RUN THIS SCRIPT." + echo " If you need to change Makefile.am or configure.ac then you" + echo " also need to run ./configure --enable-maintainer-mode and" + echo " use the appropriate autotools, *NOT* this script, to update" + echo " everything, please check the documentation of autoreconf." + echo " WARNING: libpng is intentionally generated with a known," + echo " fixed, set of autotools. It is known *NOT* to work with" + echo " the collection of autotools distributed on highly reputable" + echo " operating systems." + echo " Remember: autotools is GNU software, you are expected to" + echo " pay for support." + else + echo " You have run autogen.sh with --maintainer enabled and you" + echo " are not using a GIT distribution, then you have given an" + echo " unrecognized argument. This is not good. --maintainer" + echo " switches off any assumptions that you might not know what" + echo " you are doing." + fi + exit 1;; + esac + + shift +done +# +# First check for a set of the autotools files; if absent then this is assumed +# to be a GIT version and the local autotools must be used. If present this +# is a tarball distribution and the script should not be used. If partially +# present bad things are happening. +# +# The autotools generated files: +libpng_autotools_files="Makefile.in aclocal.m4 config.guess config.h.in + config.sub configure depcomp install-sh ltmain.sh missing\ + test-driver" +# +# Files generated by versions of configue >2.68 or automake >1.13 (i.e. later +# versions than those required by configure.ac): +libpng_autotools_extra="compile config.h.in~" +# +# These are separate because 'maintainer-clean' does not remove them. +libpng_libtool_files="scripts/libtool.m4 scripts/ltoptions.m4\ + scripts/ltsugar.m4 scripts/ltversion.m4 scripts/lt~obsolete.m4" + +libpng_autotools_dirs="autom4te.cache" # not required +# +# The configure generated files: +libpng_configure_files="Makefile config.h config.log config.status\ + libpng-config libpng.pc libtool stamp-h1" + +libpng_configure_dirs=".deps" +# +# We must remove the configure generated files as well as the autotools +# generated files if autotools are regenerated because otherwise if configure +# has been run without "--enable-maintainer-mode" make can do a partial update +# of Makefile. These functions do the two bits of cleaning. +clean_autotools(){ + rm -rf $libpng_autotools_files $libpng_libtool_files $libpng_autotools_dirs + rm -rf $libpng_autotools_extra +} + +clean_configure(){ + rm -rf $libpng_configure_files $libpng_configure_dirs +} +# +# Clean: remove everything (this is to help with testing) +if test -n "$clean" +then + clean_configure + if test -n "$maintainer" + then + clean_autotools + fi + + exit 0 +fi +# +# Validate the distribution. +libpng_autotools_file_found= +libpng_autotools_file_missing= +for file in $libpng_autotools_files +do + if test -f "$file" + then + libpng_autotools_file_found=1 + else + libpng_autotools_file_missing=1 + fi +done +# +# Presence of one of these does not *invalidate* missing, but absence +# invalidates found. +for file in $libpng_libtool_files +do + if test ! -f "$file" + then + libpng_autotools_file_missing=1 + fi +done +# +# The cache directory doesn't matter - it will be regenerated and does not exist +# anyway in a tarball. +# +# Either everything is missing or everything is there, the --maintainer option +# just changes this so that the mode is set to generate all the files. +mode= +if test -z "$libpng_autotools_file_found" -o -n "$maintainer" +then + mode="autoreconf" +else + if test -n "$libpng_autotools_file_missing" + then + mode="broken" + else + mode="configure" + fi +fi +# +# So: +case "$mode" in + autoreconf) + # Clean in case configure files exist + clean_configure + clean_autotools + # Everything must be initialized, so use --force + if autoreconf --warnings=all --force --install + then + missing= + for file in $libpng_autotools_files + do + test -f "$file" || missing=1 + done + # ignore the cache directory + test -z "$missing" || { + exec >&2 + echo "autoreconf was run, but did not produce all the expected" + echo "files. It is likely that your autotools installation is" + echo "not compatible with that expected by libpng." + exit 1 + } + else + exec >&2 + echo "autoreconf failed: your version of autotools is incompatible" + echo "with this libpng version. Please use a distributed archive" + echo "(which includes the autotools generated files) and run configure" + echo "instead." + exit 1 + fi;; + + configure) + if test -d .git + then + exec >&2 + echo "ERROR: running autoreconf on an initialized sytem" + echo " This is not necessary; it is only necessary to remake the" + echo " autotools generated files if Makefile.am or configure.ac" + echo " change and make does the right thing with:" + echo + echo " ./configure --enable-maintainer-mode." + echo + echo " You can run autoreconf yourself if you don't like maintainer" + echo " mode and you can also just run autoreconf -f -i to initialize" + echo " everything in the first place; this script is only for" + echo " compatibility with prior releases." + exit 1 + else + exec >&2 + echo "autogen.sh is intended only to generate 'configure' on systems" + echo "that do not have it. You have a complete 'configure', if you" + echo "need to change Makefile.am or configure.ac you also need to" + echo "run configure with the --enable-maintainer-mode option." + exit 1 + fi;; + + broken) + exec >&2 + echo "Your system has a partial set of autotools generated files." + echo "autogen.sh is unable to proceed. The full set of files is" + echo "contained in the libpng 'tar' distribution archive and you do" + echo "not need to run autogen.sh if you use it." + exit 1;; +esac diff --git a/compat/libpng/compile b/compat/libpng/compile new file mode 100755 index 0000000..a85b723 --- /dev/null +++ b/compat/libpng/compile @@ -0,0 +1,347 @@ +#! /bin/sh +# Wrapper for compilers which do not understand '-c -o'. + +scriptversion=2012-10-14.11; # UTC + +# Copyright (C) 1999-2014 Free Software Foundation, Inc. +# Written by Tom Tromey . +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to or send patches to +# . + +nl=' +' + +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent tools from complaining about whitespace usage. +IFS=" "" $nl" + +file_conv= + +# func_file_conv build_file lazy +# Convert a $build file to $host form and store it in $file +# Currently only supports Windows hosts. If the determined conversion +# type is listed in (the comma separated) LAZY, no conversion will +# take place. +func_file_conv () +{ + file=$1 + case $file in + / | /[!/]*) # absolute file, and not a UNC file + if test -z "$file_conv"; then + # lazily determine how to convert abs files + case `uname -s` in + MINGW*) + file_conv=mingw + ;; + CYGWIN*) + file_conv=cygwin + ;; + *) + file_conv=wine + ;; + esac + fi + case $file_conv/,$2, in + *,$file_conv,*) + ;; + mingw/*) + file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` + ;; + cygwin/*) + file=`cygpath -m "$file" || echo "$file"` + ;; + wine/*) + file=`winepath -w "$file" || echo "$file"` + ;; + esac + ;; + esac +} + +# func_cl_dashL linkdir +# Make cl look for libraries in LINKDIR +func_cl_dashL () +{ + func_file_conv "$1" + if test -z "$lib_path"; then + lib_path=$file + else + lib_path="$lib_path;$file" + fi + linker_opts="$linker_opts -LIBPATH:$file" +} + +# func_cl_dashl library +# Do a library search-path lookup for cl +func_cl_dashl () +{ + lib=$1 + found=no + save_IFS=$IFS + IFS=';' + for dir in $lib_path $LIB + do + IFS=$save_IFS + if $shared && test -f "$dir/$lib.dll.lib"; then + found=yes + lib=$dir/$lib.dll.lib + break + fi + if test -f "$dir/$lib.lib"; then + found=yes + lib=$dir/$lib.lib + break + fi + if test -f "$dir/lib$lib.a"; then + found=yes + lib=$dir/lib$lib.a + break + fi + done + IFS=$save_IFS + + if test "$found" != yes; then + lib=$lib.lib + fi +} + +# func_cl_wrapper cl arg... +# Adjust compile command to suit cl +func_cl_wrapper () +{ + # Assume a capable shell + lib_path= + shared=: + linker_opts= + for arg + do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + eat=1 + case $2 in + *.o | *.[oO][bB][jJ]) + func_file_conv "$2" + set x "$@" -Fo"$file" + shift + ;; + *) + func_file_conv "$2" + set x "$@" -Fe"$file" + shift + ;; + esac + ;; + -I) + eat=1 + func_file_conv "$2" mingw + set x "$@" -I"$file" + shift + ;; + -I*) + func_file_conv "${1#-I}" mingw + set x "$@" -I"$file" + shift + ;; + -l) + eat=1 + func_cl_dashl "$2" + set x "$@" "$lib" + shift + ;; + -l*) + func_cl_dashl "${1#-l}" + set x "$@" "$lib" + shift + ;; + -L) + eat=1 + func_cl_dashL "$2" + ;; + -L*) + func_cl_dashL "${1#-L}" + ;; + -static) + shared=false + ;; + -Wl,*) + arg=${1#-Wl,} + save_ifs="$IFS"; IFS=',' + for flag in $arg; do + IFS="$save_ifs" + linker_opts="$linker_opts $flag" + done + IFS="$save_ifs" + ;; + -Xlinker) + eat=1 + linker_opts="$linker_opts $2" + ;; + -*) + set x "$@" "$1" + shift + ;; + *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) + func_file_conv "$1" + set x "$@" -Tp"$file" + shift + ;; + *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) + func_file_conv "$1" mingw + set x "$@" "$file" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift + done + if test -n "$linker_opts"; then + linker_opts="-link$linker_opts" + fi + exec "$@" $linker_opts + exit 1 +} + +eat= + +case $1 in + '') + echo "$0: No command. Try '$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: compile [--help] [--version] PROGRAM [ARGS] + +Wrapper for compilers which do not understand '-c -o'. +Remove '-o dest.o' from ARGS, run PROGRAM with the remaining +arguments, and rename the output as expected. + +If you are trying to build a whole package this is not the +right script to run: please start by reading the file 'INSTALL'. + +Report bugs to . +EOF + exit $? + ;; + -v | --v*) + echo "compile $scriptversion" + exit $? + ;; + cl | *[/\\]cl | cl.exe | *[/\\]cl.exe ) + func_cl_wrapper "$@" # Doesn't return... + ;; +esac + +ofile= +cfile= + +for arg +do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + # So we strip '-o arg' only if arg is an object. + eat=1 + case $2 in + *.o | *.obj) + ofile=$2 + ;; + *) + set x "$@" -o "$2" + shift + ;; + esac + ;; + *.c) + cfile=$1 + set x "$@" "$1" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift +done + +if test -z "$ofile" || test -z "$cfile"; then + # If no '-o' option was seen then we might have been invoked from a + # pattern rule where we don't need one. That is ok -- this is a + # normal compilation that the losing compiler can handle. If no + # '.c' file was seen then we are probably linking. That is also + # ok. + exec "$@" +fi + +# Name of file we expect compiler to create. +cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` + +# Create the lock directory. +# Note: use '[/\\:.-]' here to ensure that we don't use the same name +# that we are using for the .o file. Also, base the name on the expected +# object file name, since that is what matters with a parallel build. +lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d +while true; do + if mkdir "$lockdir" >/dev/null 2>&1; then + break + fi + sleep 1 +done +# FIXME: race condition here if user kills between mkdir and trap. +trap "rmdir '$lockdir'; exit 1" 1 2 15 + +# Run the compile. +"$@" +ret=$? + +if test -f "$cofile"; then + test "$cofile" = "$ofile" || mv "$cofile" "$ofile" +elif test -f "${cofile}bj"; then + test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" +fi + +rmdir "$lockdir" +exit $ret + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/compat/libpng/config.guess b/compat/libpng/config.guess new file mode 100755 index 0000000..2346bbc --- /dev/null +++ b/compat/libpng/config.guess @@ -0,0 +1,1421 @@ +#! /bin/sh +# Attempt to guess a canonical system name. +# Copyright 1992-2014 Free Software Foundation, Inc. + +timestamp='2014-11-04' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, see . +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that +# program. This Exception is an additional permission under section 7 +# of the GNU General Public License, version 3 ("GPLv3"). +# +# Originally written by Per Bothner; maintained since 2000 by Ben Elliston. +# +# You can get the latest version of this script from: +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD +# +# Please send patches to . + + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system \`$me' is run on. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright 1992-2014 Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 +fi + +trap 'exit 1' 1 2 15 + +# CC_FOR_BUILD -- compiler used by this script. Note that the use of a +# compiler to aid in system detection is discouraged as it requires +# temporary files to be created and, as you can see below, it is a +# headache to deal with in a portable fashion. + +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. + +# Portable tmp directory creation inspired by the Autoconf team. + +set_cc_for_build=' +trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; +trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; +: ${TMPDIR=/tmp} ; + { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || + { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || + { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; +dummy=$tmp/dummy ; +tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; +case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int x;" > $dummy.c ; + for c in cc gcc c89 c99 ; do + if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then + CC_FOR_BUILD="$c"; break ; + fi ; + done ; + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found ; + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; +esac ; set_cc_for_build= ;' + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# (ghazi@noc.rutgers.edu 1994-08-24) +if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH +fi + +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +case "${UNAME_SYSTEM}" in +Linux|GNU|GNU/*) + # If the system lacks a compiler, then just pick glibc. + # We could probably try harder. + LIBC=gnu + + eval $set_cc_for_build + cat <<-EOF > $dummy.c + #include + #if defined(__UCLIBC__) + LIBC=uclibc + #elif defined(__dietlibc__) + LIBC=dietlibc + #else + LIBC=gnu + #endif + EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC' | sed 's, ,,g'` + ;; +esac + +# Note: order is significant - the case branches are not exclusive. + +case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + *:NetBSD:*:*) + # NetBSD (nbsd) targets should (where applicable) match one or + # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # + # Note: NetBSD doesn't particularly care about the vendor + # portion of the name. We always set it to "unknown". + sysctl="sysctl -n hw.machine_arch" + UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ + /usr/sbin/$sysctl 2>/dev/null || echo unknown)` + case "${UNAME_MACHINE_ARCH}" in + armeb) machine=armeb-unknown ;; + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; + sh5el) machine=sh5le-unknown ;; + *) machine=${UNAME_MACHINE_ARCH}-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently, or will in the future. + case "${UNAME_MACHINE_ARCH}" in + arm*|i386|m68k|ns32k|sh3*|sparc|vax) + eval $set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ELF__ + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # The OS release + # Debian GNU/NetBSD machines have a different userland, and + # thus, need a distinct triplet. However, they do not need + # kernel version information, so it can be replaced with a + # suitable tag, in the style of linux-gnu. + case "${UNAME_VERSION}" in + Debian*) + release='-gnu' + ;; + *) + release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + ;; + esac + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}" + exit ;; + *:Bitrig:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE} + exit ;; + *:OpenBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} + exit ;; + *:ekkoBSD:*:*) + echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} + exit ;; + *:SolidBSD:*:*) + echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} + exit ;; + macppc:MirBSD:*:*) + echo powerpc-unknown-mirbsd${UNAME_RELEASE} + exit ;; + *:MirBSD:*:*) + echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} + exit ;; + alpha:OSF1:*:*) + case $UNAME_RELEASE in + *4.0) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + ;; + *5.*) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` + ;; + esac + # According to Compaq, /usr/sbin/psrinfo has been available on + # OSF/1 and Tru64 systems produced since 1995. I hope that + # covers most systems running today. This code pipes the CPU + # types through head -n 1, so we only detect the type of CPU 0. + ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` + case "$ALPHA_CPU_TYPE" in + "EV4 (21064)") + UNAME_MACHINE="alpha" ;; + "EV4.5 (21064)") + UNAME_MACHINE="alpha" ;; + "LCA4 (21066/21068)") + UNAME_MACHINE="alpha" ;; + "EV5 (21164)") + UNAME_MACHINE="alphaev5" ;; + "EV5.6 (21164A)") + UNAME_MACHINE="alphaev56" ;; + "EV5.6 (21164PC)") + UNAME_MACHINE="alphapca56" ;; + "EV5.7 (21164PC)") + UNAME_MACHINE="alphapca57" ;; + "EV6 (21264)") + UNAME_MACHINE="alphaev6" ;; + "EV6.7 (21264A)") + UNAME_MACHINE="alphaev67" ;; + "EV6.8CB (21264C)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8AL (21264B)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8CX (21264D)") + UNAME_MACHINE="alphaev68" ;; + "EV6.9A (21264/EV69A)") + UNAME_MACHINE="alphaev69" ;; + "EV7 (21364)") + UNAME_MACHINE="alphaev7" ;; + "EV7.9 (21364A)") + UNAME_MACHINE="alphaev79" ;; + esac + # A Pn.n version is a patched version. + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + # Reset EXIT trap before exiting to avoid spurious non-zero exit code. + exitcode=$? + trap '' 0 + exit $exitcode ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix + exit ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 + exit ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 + exit ;; + *:[Aa]miga[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-amigaos + exit ;; + *:[Mm]orph[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-morphos + exit ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit ;; + *:z/VM:*:*) + echo s390-ibm-zvmoe + exit ;; + *:OS400:*:*) + echo powerpc-ibm-os400 + exit ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} + exit ;; + arm*:riscos:*:*|arm*:RISCOS:*:*) + echo arm-unknown-riscos + exit ;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit ;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit ;; + DRS?6000:unix:4.0:6*) + echo sparc-icl-nx6 + exit ;; + DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) + case `/usr/bin/uname -p` in + sparc) echo sparc-icl-nx7; exit ;; + esac ;; + s390x:SunOS:*:*) + echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) + echo i386-pc-auroraux${UNAME_RELEASE} + exit ;; + i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) + eval $set_cc_for_build + SUN_ARCH="i386" + # If there is a compiler, see if it is configured for 64-bit objects. + # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. + # This test works for both compilers. + if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + SUN_ARCH="x86_64" + fi + fi + echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` + exit ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} + exit ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos${UNAME_RELEASE} + ;; + sun4) + echo sparc-sun-sunos${UNAME_RELEASE} + ;; + esac + exit ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} + exit ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} + exit ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} + exit ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} + exit ;; + m68k:machten:*:*) + echo m68k-apple-machten${UNAME_RELEASE} + exit ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} + exit ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} + exit ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} + exit ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix${UNAME_RELEASE} + exit ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c +#ifdef __cplusplus +#include /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && + dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && + SYSTEM_NAME=`$dummy $dummyarg` && + { echo "$SYSTEM_NAME"; exit; } + echo mips-mips-riscos${UNAME_RELEASE} + exit ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit ;; + Motorola:*:4.3:PL8-*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] + then + if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ + [ ${TARGET_BINARY_INTERFACE}x = x ] + then + echo m88k-dg-dgux${UNAME_RELEASE} + else + echo m88k-dg-dguxbcs${UNAME_RELEASE} + fi + else + echo i586-dg-dgux${UNAME_RELEASE} + fi + exit ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` + exit ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix + exit ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} + exit ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` + then + echo "$SYSTEM_NAME" + else + echo rs6000-ibm-aix3.2.5 + fi + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit ;; + *:AIX:*:[4567]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` + if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/lslpp ] ; then + IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc | + awk -F: '{ print $3 }' | sed s/[0-9]*$/0/` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} + exit ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 + exit ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to + exit ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + case "${UNAME_MACHINE}" in + 9000/31? ) HP_ARCH=m68000 ;; + 9000/[34]?? ) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 + 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH="hppa2.0n" ;; + 64) HP_ARCH="hppa2.0w" ;; + '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 + esac ;; + esac + fi + if [ "${HP_ARCH}" = "" ]; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + + #define _HPUX_SOURCE + #include + #include + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` + test -z "$HP_ARCH" && HP_ARCH=hppa + fi ;; + esac + if [ ${HP_ARCH} = "hppa2.0w" ] + then + eval $set_cc_for_build + + # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating + # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler + # generating 64-bit code. GNU and HP use different nomenclature: + # + # $ CC_FOR_BUILD=cc ./config.guess + # => hppa2.0w-hp-hpux11.23 + # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess + # => hppa64-hp-hpux11.23 + + if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | + grep -q __LP64__ + then + HP_ARCH="hppa2.0w" + else + HP_ARCH="hppa64" + fi + fi + echo ${HP_ARCH}-hp-hpux${HPUX_REV} + exit ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux${HPUX_REV} + exit ;; + 3050*:HI-UX:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + echo unknown-hitachi-hiuxwe2 + exit ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd + exit ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf + exit ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-unknown-osf1mk + else + echo ${UNAME_MACHINE}-unknown-osf1 + fi + exit ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + *:UNICOS/mp:*:*) + echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + 5000:UNIX_System_V:4.*:*) + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` + echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + exit ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:FreeBSD:*:*) + UNAME_PROCESSOR=`/usr/bin/uname -p` + case ${UNAME_PROCESSOR} in + amd64) + echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + *) + echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + esac + exit ;; + i*:CYGWIN*:*) + echo ${UNAME_MACHINE}-pc-cygwin + exit ;; + *:MINGW64*:*) + echo ${UNAME_MACHINE}-pc-mingw64 + exit ;; + *:MINGW*:*) + echo ${UNAME_MACHINE}-pc-mingw32 + exit ;; + *:MSYS*:*) + echo ${UNAME_MACHINE}-pc-msys + exit ;; + i*:windows32*:*) + # uname -m includes "-pc" on this system. + echo ${UNAME_MACHINE}-mingw32 + exit ;; + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 + exit ;; + *:Interix*:*) + case ${UNAME_MACHINE} in + x86) + echo i586-pc-interix${UNAME_RELEASE} + exit ;; + authenticamd | genuineintel | EM64T) + echo x86_64-unknown-interix${UNAME_RELEASE} + exit ;; + IA64) + echo ia64-unknown-interix${UNAME_RELEASE} + exit ;; + esac ;; + [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) + echo i${UNAME_MACHINE}-pc-mks + exit ;; + 8664:Windows_NT:*) + echo x86_64-pc-mks + exit ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? + echo i586-pc-interix + exit ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin + exit ;; + amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) + echo x86_64-unknown-cygwin + exit ;; + p*:CYGWIN*:*) + echo powerpcle-unknown-cygwin + exit ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + *:GNU:*:*) + # the GNU system + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-${LIBC}`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` + exit ;; + *:GNU/*:*:*) + # other systems with GNU libc and userland + echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC} + exit ;; + i*86:Minix:*:*) + echo ${UNAME_MACHINE}-pc-minix + exit ;; + aarch64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + aarch64_be:Linux:*:*) + UNAME_MACHINE=aarch64_be + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep -q ld.so.1 + if test "$?" = 0 ; then LIBC="gnulibc1" ; fi + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + arc:Linux:*:* | arceb:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + arm*:Linux:*:*) + eval $set_cc_for_build + if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_EABI__ + then + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + else + if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_PCS_VFP + then + echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi + else + echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabihf + fi + fi + exit ;; + avr32*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + cris:Linux:*:*) + echo ${UNAME_MACHINE}-axis-linux-${LIBC} + exit ;; + crisv32:Linux:*:*) + echo ${UNAME_MACHINE}-axis-linux-${LIBC} + exit ;; + frv:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + hexagon:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + i*86:Linux:*:*) + echo ${UNAME_MACHINE}-pc-linux-${LIBC} + exit ;; + ia64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + m32r*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + m68*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + mips:Linux:*:* | mips64:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef ${UNAME_MACHINE} + #undef ${UNAME_MACHINE}el + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=${UNAME_MACHINE}el + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=${UNAME_MACHINE} + #else + CPU= + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; } + ;; + openrisc*:Linux:*:*) + echo or1k-unknown-linux-${LIBC} + exit ;; + or32:Linux:*:* | or1k*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + padre:Linux:*:*) + echo sparc-unknown-linux-${LIBC} + exit ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-${LIBC} + exit ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-${LIBC} ;; + PA8*) echo hppa2.0-unknown-linux-${LIBC} ;; + *) echo hppa-unknown-linux-${LIBC} ;; + esac + exit ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-${LIBC} + exit ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-${LIBC} + exit ;; + ppc64le:Linux:*:*) + echo powerpc64le-unknown-linux-${LIBC} + exit ;; + ppcle:Linux:*:*) + echo powerpcle-unknown-linux-${LIBC} + exit ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo ${UNAME_MACHINE}-ibm-linux-${LIBC} + exit ;; + sh64*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + sh*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + tile*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + vax:Linux:*:*) + echo ${UNAME_MACHINE}-dec-linux-${LIBC} + exit ;; + x86_64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + xtensa*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + echo i386-sequent-sysv4 + exit ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} + exit ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx + exit ;; + i*86:XTS-300:*:STOP) + echo ${UNAME_MACHINE}-unknown-stop + exit ;; + i*86:atheos:*:*) + echo ${UNAME_MACHINE}-unknown-atheos + exit ;; + i*86:syllable:*:*) + echo ${UNAME_MACHINE}-pc-syllable + exit ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) + echo i386-unknown-lynxos${UNAME_RELEASE} + exit ;; + i*86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp + exit ;; + i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi + exit ;; + i*86:*:5:[678]*) + # UnixWare 7.x, OpenUNIX and OpenServer 6. + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} + exit ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` + (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + else + echo ${UNAME_MACHINE}-pc-sysv32 + fi + exit ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i586. + # Note: whatever this is, it MUST be the same as what config.sub + # prints for the "djgpp" host, or else GDB configury will decide that + # this is a cross-build. + echo i586-pc-msdosdjgpp + exit ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi + exit ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit ;; + mc68k:UNIX:SYSTEM5:3.51m) + echo m68k-convergent-sysv + exit ;; + M680?0:D-NIX:5.3:*) + echo m68k-diab-dnix + exit ;; + M68*:*:R3V[5678]*:*) + test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; + 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4; exit; } ;; + NCR*:*:4.2:* | MPRAS*:*:4.2:*) + OS_REL='.3' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} + exit ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} + exit ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} + exit ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) + echo powerpc-unknown-lynxos${UNAME_RELEASE} + exit ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} + exit ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo ${UNAME_MACHINE}-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says + echo i586-unisys-sysv4 + exit ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes . + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 + exit ;; + i*86:VOS:*:*) + # From Paul.Green@stratus.com. + echo ${UNAME_MACHINE}-stratus-vos + exit ;; + *:VOS:*:*) + # From Paul.Green@stratus.com. + echo hppa1.1-stratus-vos + exit ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} + exit ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 + exit ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi + exit ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit ;; + BePC:Haiku:*:*) # Haiku running on Intel PC compatible. + echo i586-pc-haiku + exit ;; + x86_64:Haiku:*:*) + echo x86_64-unknown-haiku + exit ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} + exit ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} + exit ;; + SX-6:SUPER-UX:*:*) + echo sx6-nec-superux${UNAME_RELEASE} + exit ;; + SX-7:SUPER-UX:*:*) + echo sx7-nec-superux${UNAME_RELEASE} + exit ;; + SX-8:SUPER-UX:*:*) + echo sx8-nec-superux${UNAME_RELEASE} + exit ;; + SX-8R:SUPER-UX:*:*) + echo sx8r-nec-superux${UNAME_RELEASE} + exit ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Darwin:*:*) + UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown + eval $set_cc_for_build + if test "$UNAME_PROCESSOR" = unknown ; then + UNAME_PROCESSOR=powerpc + fi + if test `echo "$UNAME_RELEASE" | sed -e 's/\..*//'` -le 10 ; then + if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + case $UNAME_PROCESSOR in + i386) UNAME_PROCESSOR=x86_64 ;; + powerpc) UNAME_PROCESSOR=powerpc64 ;; + esac + fi + fi + elif test "$UNAME_PROCESSOR" = i386 ; then + # Avoid executing cc on OS X 10.9, as it ships with a stub + # that puts up a graphical alert prompting to install + # developer tools. Any system running Mac OS X 10.7 or + # later (Darwin 11 and later) is required to have a 64-bit + # processor. This is not true of the ARM version of Darwin + # that Apple uses in portable devices. + UNAME_PROCESSOR=x86_64 + fi + echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} + exit ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = "x86"; then + UNAME_PROCESSOR=i386 + UNAME_MACHINE=pc + fi + echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} + exit ;; + *:QNX:*:4*) + echo i386-pc-qnx + exit ;; + NEO-?:NONSTOP_KERNEL:*:*) + echo neo-tandem-nsk${UNAME_RELEASE} + exit ;; + NSE-*:NONSTOP_KERNEL:*:*) + echo nse-tandem-nsk${UNAME_RELEASE} + exit ;; + NSR-?:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk${UNAME_RELEASE} + exit ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit ;; + DS/*:UNIX_System_V:*:*) + echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} + exit ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + if test "$cputype" = "386"; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo ${UNAME_MACHINE}-unknown-plan9 + exit ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit ;; + *:ITS:*:*) + echo pdp10-unknown-its + exit ;; + SEI:*:*:SEIUX) + echo mips-sei-seiux${UNAME_RELEASE} + exit ;; + *:DragonFly:*:*) + echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit ;; + *:*VMS:*:*) + UNAME_MACHINE=`(uname -p) 2>/dev/null` + case "${UNAME_MACHINE}" in + A*) echo alpha-dec-vms ; exit ;; + I*) echo ia64-dec-vms ; exit ;; + V*) echo vax-dec-vms ; exit ;; + esac ;; + *:XENIX:*:SysV) + echo i386-pc-xenix + exit ;; + i*86:skyos:*:*) + echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' + exit ;; + i*86:rdos:*:*) + echo ${UNAME_MACHINE}-pc-rdos + exit ;; + i*86:AROS:*:*) + echo ${UNAME_MACHINE}-pc-aros + exit ;; + x86_64:VMkernel:*:*) + echo ${UNAME_MACHINE}-unknown-esx + exit ;; +esac + +cat >&2 < in order to provide the needed +information to handle your system. + +config.guess timestamp = $timestamp + +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = ${UNAME_MACHINE} +UNAME_RELEASE = ${UNAME_RELEASE} +UNAME_SYSTEM = ${UNAME_SYSTEM} +UNAME_VERSION = ${UNAME_VERSION} +EOF + +exit 1 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/compat/libpng/config.h.in b/compat/libpng/config.h.in new file mode 100755 index 0000000..6190e67 --- /dev/null +++ b/compat/libpng/config.h.in @@ -0,0 +1,108 @@ +/* config.h.in. Generated from configure.ac by autoheader. */ + +/* Define to 1 if you have the header file. */ +#undef HAVE_DLFCN_H + +/* Define to 1 if you have the `feenableexcept' function. */ +#undef HAVE_FEENABLEEXCEPT + +/* Define to 1 if you have the header file. */ +#undef HAVE_INTTYPES_H + +/* Define to 1 if you have the `m' library (-lm). */ +#undef HAVE_LIBM + +/* Define to 1 if you have the `z' library (-lz). */ +#undef HAVE_LIBZ + +/* Define to 1 if you have the header file. */ +#undef HAVE_MEMORY_H + +/* Define to 1 if you have the `memset' function. */ +#undef HAVE_MEMSET + +/* Define to 1 if you have the `pow' function. */ +#undef HAVE_POW + +/* Define to 1 if you have the header file. */ +#undef HAVE_STDINT_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STDLIB_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STRINGS_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STRING_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_STAT_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_TYPES_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_UNISTD_H + +/* Define to the sub-directory where libtool stores uninstalled libraries. */ +#undef LT_OBJDIR + +/* Name of package */ +#undef PACKAGE + +/* Define to the address where bug reports for this package should be sent. */ +#undef PACKAGE_BUGREPORT + +/* Define to the full name of this package. */ +#undef PACKAGE_NAME + +/* Define to the full name and version of this package. */ +#undef PACKAGE_STRING + +/* Define to the one symbol short name of this package. */ +#undef PACKAGE_TARNAME + +/* Define to the home page for this package. */ +#undef PACKAGE_URL + +/* Define to the version of this package. */ +#undef PACKAGE_VERSION + +/* Turn on ARM Neon optimizations at run-time */ +#undef PNG_ARM_NEON_API_SUPPORTED + +/* Check for ARM Neon support at run-time */ +#undef PNG_ARM_NEON_CHECK_SUPPORTED + +/* Enable ARM Neon optimizations */ +#undef PNG_ARM_NEON_OPT + +/* Define to 1 if you have the ANSI C header files. */ +#undef STDC_HEADERS + +/* Define to 1 if your declares `struct tm'. */ +#undef TM_IN_SYS_TIME + +/* Version number of package */ +#undef VERSION + +/* Define to empty if `const' does not conform to ANSI C. */ +#undef const + +/* Define to the equivalent of the C99 'restrict' keyword, or to + nothing if this is not supported. Do not define if restrict is + supported directly. */ +#undef restrict +/* Work around a bug in Sun C++: it does not support _Restrict or + __restrict__, even though the corresponding Sun C compiler ends up with + "#define restrict _Restrict" or "#define restrict __restrict__" in the + previous line. Perhaps some future version of Sun C++ will work with + restrict; if so, hopefully it defines __RESTRICT like Sun C does. */ +#if defined __SUNPRO_CC && !defined __RESTRICT +# define _Restrict +# define __restrict__ +#endif + +/* Define to `unsigned int' if does not define. */ +#undef size_t diff --git a/compat/libpng/config.sub b/compat/libpng/config.sub new file mode 100755 index 0000000..4e43663 --- /dev/null +++ b/compat/libpng/config.sub @@ -0,0 +1,1807 @@ +#! /bin/sh +# Configuration validation subroutine script. +# Copyright 1992-2014 Free Software Foundation, Inc. + +timestamp='2014-12-03' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, see . +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that +# program. This Exception is an additional permission under section 7 +# of the GNU General Public License, version 3 ("GPLv3"). + + +# Please send patches to . +# +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# You can get the latest version of this script from: +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS + $0 [OPTION] ALIAS + +Canonicalize a configuration name. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.sub ($timestamp) + +Copyright 1992-2014 Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo $1 + exit ;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; +esac + +# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). +# Here we must recognize all the valid KERNEL-OS combinations. +maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` +case $maybe_os in + nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \ + linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \ + knetbsd*-gnu* | netbsd*-gnu* | \ + kopensolaris*-gnu* | \ + storm-chaos* | os2-emx* | rtmk-nova*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + ;; + android-linux) + os=-linux-android + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown + ;; + *) + basic_machine=`echo $1 | sed 's/-[^-]*$//'` + if [ $basic_machine != $1 ] + then os=`echo $1 | sed 's/.*-/-/'` + else os=; fi + ;; +esac + +### Let's recognize common machines as not being operating systems so +### that things like config.sub decstation-3100 work. We also +### recognize some manufacturers as not being operating systems, so we +### can provide default operating systems below. +case $os in + -sun*os*) + # Prevent following clause from handling this invalid input. + ;; + -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ + -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ + -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ + -apple | -axis | -knuth | -cray | -microblaze*) + os= + basic_machine=$1 + ;; + -bluegene*) + os=-cnk + ;; + -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; + -scout) + ;; + -wrs) + os=-vxworks + basic_machine=$1 + ;; + -chorusos*) + os=-chorusos + basic_machine=$1 + ;; + -chorusrdb) + os=-chorusrdb + basic_machine=$1 + ;; + -hiux*) + os=-hiuxwe2 + ;; + -sco6) + os=-sco5v6 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5) + os=-sco3.2v5 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco4) + os=-sco3.2v4 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2v[4-9]*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5v6*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -udk*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -isc) + os=-isc2.2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -clix*) + basic_machine=clipper-intergraph + ;; + -isc*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -lynx*178) + os=-lynxos178 + ;; + -lynx*5) + os=-lynxos5 + ;; + -lynx*) + os=-lynxos + ;; + -ptx*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` + ;; + -windowsnt*) + os=`echo $os | sed -e 's/windowsnt/winnt/'` + ;; + -psos*) + os=-psos + ;; + -mint | -mint[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; +esac + +# Decode aliases for certain CPU-COMPANY combinations. +case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. + 1750a | 580 \ + | a29k \ + | aarch64 | aarch64_be \ + | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ + | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ + | am33_2.0 \ + | arc | arceb \ + | arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \ + | avr | avr32 \ + | be32 | be64 \ + | bfin \ + | c4x | c8051 | clipper \ + | d10v | d30v | dlx | dsp16xx \ + | epiphany \ + | fido | fr30 | frv \ + | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ + | hexagon \ + | i370 | i860 | i960 | ia64 \ + | ip2k | iq2000 \ + | k1om \ + | le32 | le64 \ + | lm32 \ + | m32c | m32r | m32rle | m68000 | m68k | m88k \ + | maxq | mb | microblaze | microblazeel | mcore | mep | metag \ + | mips | mipsbe | mipseb | mipsel | mipsle \ + | mips16 \ + | mips64 | mips64el \ + | mips64octeon | mips64octeonel \ + | mips64orion | mips64orionel \ + | mips64r5900 | mips64r5900el \ + | mips64vr | mips64vrel \ + | mips64vr4100 | mips64vr4100el \ + | mips64vr4300 | mips64vr4300el \ + | mips64vr5000 | mips64vr5000el \ + | mips64vr5900 | mips64vr5900el \ + | mipsisa32 | mipsisa32el \ + | mipsisa32r2 | mipsisa32r2el \ + | mipsisa32r6 | mipsisa32r6el \ + | mipsisa64 | mipsisa64el \ + | mipsisa64r2 | mipsisa64r2el \ + | mipsisa64r6 | mipsisa64r6el \ + | mipsisa64sb1 | mipsisa64sb1el \ + | mipsisa64sr71k | mipsisa64sr71kel \ + | mipsr5900 | mipsr5900el \ + | mipstx39 | mipstx39el \ + | mn10200 | mn10300 \ + | moxie \ + | mt \ + | msp430 \ + | nds32 | nds32le | nds32be \ + | nios | nios2 | nios2eb | nios2el \ + | ns16k | ns32k \ + | open8 | or1k | or1knd | or32 \ + | pdp10 | pdp11 | pj | pjl \ + | powerpc | powerpc64 | powerpc64le | powerpcle \ + | pyramid \ + | riscv32 | riscv64 \ + | rl78 | rx \ + | score \ + | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ + | sh64 | sh64le \ + | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ + | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ + | spu \ + | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \ + | ubicom32 \ + | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \ + | visium \ + | we32k \ + | x86 | xc16x | xstormy16 | xtensa \ + | z8k | z80) + basic_machine=$basic_machine-unknown + ;; + c54x) + basic_machine=tic54x-unknown + ;; + c55x) + basic_machine=tic55x-unknown + ;; + c6x) + basic_machine=tic6x-unknown + ;; + leon|leon[3-9]) + basic_machine=sparc-$basic_machine + ;; + m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip) + basic_machine=$basic_machine-unknown + os=-none + ;; + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) + ;; + ms1) + basic_machine=mt-unknown + ;; + + strongarm | thumb | xscale) + basic_machine=arm-unknown + ;; + xgate) + basic_machine=$basic_machine-unknown + os=-none + ;; + xscaleeb) + basic_machine=armeb-unknown + ;; + + xscaleel) + basic_machine=armel-unknown + ;; + + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and + # (2) the word "unknown" tends to confuse beginning users. + i*86 | x86_64) + basic_machine=$basic_machine-pc + ;; + # Object if more than one company name word. + *-*-*) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; + # Recognize the basic CPU types with company name. + 580-* \ + | a29k-* \ + | aarch64-* | aarch64_be-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ + | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ + | alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \ + | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ + | avr-* | avr32-* \ + | be32-* | be64-* \ + | bfin-* | bs2000-* \ + | c[123]* | c30-* | [cjt]90-* | c4x-* \ + | c8051-* | clipper-* | craynv-* | cydra-* \ + | d10v-* | d30v-* | dlx-* \ + | elxsi-* \ + | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ + | h8300-* | h8500-* \ + | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ + | hexagon-* \ + | i*86-* | i860-* | i960-* | ia64-* \ + | ip2k-* | iq2000-* \ + | k1om-* \ + | le32-* | le64-* \ + | lm32-* \ + | m32c-* | m32r-* | m32rle-* \ + | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ + | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \ + | microblaze-* | microblazeel-* \ + | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ + | mips16-* \ + | mips64-* | mips64el-* \ + | mips64octeon-* | mips64octeonel-* \ + | mips64orion-* | mips64orionel-* \ + | mips64r5900-* | mips64r5900el-* \ + | mips64vr-* | mips64vrel-* \ + | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* \ + | mips64vr5000-* | mips64vr5000el-* \ + | mips64vr5900-* | mips64vr5900el-* \ + | mipsisa32-* | mipsisa32el-* \ + | mipsisa32r2-* | mipsisa32r2el-* \ + | mipsisa32r6-* | mipsisa32r6el-* \ + | mipsisa64-* | mipsisa64el-* \ + | mipsisa64r2-* | mipsisa64r2el-* \ + | mipsisa64r6-* | mipsisa64r6el-* \ + | mipsisa64sb1-* | mipsisa64sb1el-* \ + | mipsisa64sr71k-* | mipsisa64sr71kel-* \ + | mipsr5900-* | mipsr5900el-* \ + | mipstx39-* | mipstx39el-* \ + | mmix-* \ + | mt-* \ + | msp430-* \ + | nds32-* | nds32le-* | nds32be-* \ + | nios-* | nios2-* | nios2eb-* | nios2el-* \ + | none-* | np1-* | ns16k-* | ns32k-* \ + | open8-* \ + | or1k*-* \ + | orion-* \ + | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \ + | pyramid-* \ + | rl78-* | romp-* | rs6000-* | rx-* \ + | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ + | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ + | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ + | sparclite-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \ + | tahoe-* \ + | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ + | tile*-* \ + | tron-* \ + | ubicom32-* \ + | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \ + | vax-* \ + | visium-* \ + | we32k-* \ + | x86-* | x86_64-* | xc16x-* | xps100-* \ + | xstormy16-* | xtensa*-* \ + | ymp-* \ + | z8k-* | z80-*) + ;; + # Recognize the basic CPU types without company name, with glob match. + xtensa*) + basic_machine=$basic_machine-unknown + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 386bsd) + basic_machine=i386-unknown + os=-bsd + ;; + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + basic_machine=m68000-att + ;; + 3b*) + basic_machine=we32k-att + ;; + a29khif) + basic_machine=a29k-amd + os=-udi + ;; + abacus) + basic_machine=abacus-unknown + ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout + ;; + alliant | fx80) + basic_machine=fx80-alliant + ;; + altos | altos3068) + basic_machine=m68k-altos + ;; + am29k) + basic_machine=a29k-none + os=-bsd + ;; + amd64) + basic_machine=x86_64-pc + ;; + amd64-*) + basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + amdahl) + basic_machine=580-amdahl + os=-sysv + ;; + amiga | amiga-*) + basic_machine=m68k-unknown + ;; + amigaos | amigados) + basic_machine=m68k-unknown + os=-amigaos + ;; + amigaunix | amix) + basic_machine=m68k-unknown + os=-sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=-sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + os=-bsd + ;; + aros) + basic_machine=i386-pc + os=-aros + ;; + aux) + basic_machine=m68k-apple + os=-aux + ;; + balance) + basic_machine=ns32k-sequent + os=-dynix + ;; + blackfin) + basic_machine=bfin-unknown + os=-linux + ;; + blackfin-*) + basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + bluegene*) + basic_machine=powerpc-ibm + os=-cnk + ;; + c54x-*) + basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + c55x-*) + basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + c6x-*) + basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + c90) + basic_machine=c90-cray + os=-unicos + ;; + cegcc) + basic_machine=arm-unknown + os=-cegcc + ;; + convex-c1) + basic_machine=c1-convex + os=-bsd + ;; + convex-c2) + basic_machine=c2-convex + os=-bsd + ;; + convex-c32) + basic_machine=c32-convex + os=-bsd + ;; + convex-c34) + basic_machine=c34-convex + os=-bsd + ;; + convex-c38) + basic_machine=c38-convex + os=-bsd + ;; + cray | j90) + basic_machine=j90-cray + os=-unicos + ;; + craynv) + basic_machine=craynv-cray + os=-unicosmp + ;; + cr16 | cr16-*) + basic_machine=cr16-unknown + os=-elf + ;; + crds | unos) + basic_machine=m68k-crds + ;; + crisv32 | crisv32-* | etraxfs*) + basic_machine=crisv32-axis + ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; + crx) + basic_machine=crx-unknown + os=-elf + ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; + decsystem10* | dec10*) + basic_machine=pdp10-dec + os=-tops10 + ;; + decsystem20* | dec20*) + basic_machine=pdp10-dec + os=-tops20 + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola + ;; + delta88) + basic_machine=m88k-motorola + os=-sysv3 + ;; + dicos) + basic_machine=i686-pc + os=-dicos + ;; + djgpp) + basic_machine=i586-pc + os=-msdosdjgpp + ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx + ;; + dpx2* | dpx2*-bull) + basic_machine=m68k-bull + os=-sysv3 + ;; + ebmon29k) + basic_machine=a29k-amd + os=-ebmon + ;; + elxsi) + basic_machine=elxsi-elxsi + os=-bsd + ;; + encore | umax | mmax) + basic_machine=ns32k-encore + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=-ose + ;; + fx2800) + basic_machine=i860-alliant + ;; + genix) + basic_machine=ns32k-ns + ;; + gmicro) + basic_machine=tron-gmicro + os=-sysv + ;; + go32) + basic_machine=i386-pc + os=-go32 + ;; + h3050r* | hiux*) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=-hms + ;; + h8300xray) + basic_machine=h8300-hitachi + os=-xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=-hms + ;; + harris) + basic_machine=m88k-harris + os=-sysv3 + ;; + hp300-*) + basic_machine=m68k-hp + ;; + hp300bsd) + basic_machine=m68k-hp + os=-bsd + ;; + hp300hpux) + basic_machine=m68k-hp + os=-hpux + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + basic_machine=m68000-hp + ;; + hp9k3[2-9][0-9]) + basic_machine=m68k-hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + basic_machine=hppa1.1-hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hppa-next) + os=-nextstep3 + ;; + hppaosf) + basic_machine=hppa1.1-hp + os=-osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=-proelf + ;; + i370-ibm* | ibm*) + basic_machine=i370-ibm + ;; + i*86v32) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv32 + ;; + i*86v4*) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv4 + ;; + i*86v) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv + ;; + i*86sol2) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-solaris2 + ;; + i386mach) + basic_machine=i386-mach + os=-mach + ;; + i386-vsta | vsta) + basic_machine=i386-unknown + os=-vsta + ;; + iris | iris4d) + basic_machine=mips-sgi + case $os in + -irix*) + ;; + *) + os=-irix4 + ;; + esac + ;; + isi68 | isi) + basic_machine=m68k-isi + os=-sysv + ;; + leon-*|leon[3-9]-*) + basic_machine=sparc-`echo $basic_machine | sed 's/-.*//'` + ;; + m68knommu) + basic_machine=m68k-unknown + os=-linux + ;; + m68knommu-*) + basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + m88k-omron*) + basic_machine=m88k-omron + ;; + magnum | m3230) + basic_machine=mips-mips + os=-sysv + ;; + merlin) + basic_machine=ns32k-utek + os=-sysv + ;; + microblaze*) + basic_machine=microblaze-xilinx + ;; + mingw64) + basic_machine=x86_64-pc + os=-mingw64 + ;; + mingw32) + basic_machine=i686-pc + os=-mingw32 + ;; + mingw32ce) + basic_machine=arm-unknown + os=-mingw32ce + ;; + miniframe) + basic_machine=m68000-convergent + ;; + *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; + mips3*-*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; + morphos) + basic_machine=powerpc-unknown + os=-morphos + ;; + moxiebox) + basic_machine=moxie-unknown + os=-moxiebox + ;; + msdos) + basic_machine=i386-pc + os=-msdos + ;; + ms1-*) + basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` + ;; + msys) + basic_machine=i686-pc + os=-msys + ;; + mvs) + basic_machine=i370-ibm + os=-mvs + ;; + nacl) + basic_machine=le32-unknown + os=-nacl + ;; + ncr3000) + basic_machine=i486-ncr + os=-sysv4 + ;; + netbsd386) + basic_machine=i386-unknown + os=-netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=-linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=-newsos + ;; + news1000) + basic_machine=m68030-sony + os=-newsos + ;; + news-3600 | risc-news) + basic_machine=mips-sony + os=-newsos + ;; + necv70) + basic_machine=v70-nec + os=-sysv + ;; + next | m*-next ) + basic_machine=m68k-next + case $os in + -nextstep* ) + ;; + -ns2*) + os=-nextstep2 + ;; + *) + os=-nextstep3 + ;; + esac + ;; + nh3000) + basic_machine=m68k-harris + os=-cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=-cxux + ;; + nindy960) + basic_machine=i960-intel + os=-nindy + ;; + mon960) + basic_machine=i960-intel + os=-mon960 + ;; + nonstopux) + basic_machine=mips-compaq + os=-nonstopux + ;; + np1) + basic_machine=np1-gould + ;; + neo-tandem) + basic_machine=neo-tandem + ;; + nse-tandem) + basic_machine=nse-tandem + ;; + nsr-tandem) + basic_machine=nsr-tandem + ;; + op50n-* | op60c-*) + basic_machine=hppa1.1-oki + os=-proelf + ;; + openrisc | openrisc-*) + basic_machine=or32-unknown + ;; + os400) + basic_machine=powerpc-ibm + os=-os400 + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose + ;; + os68k) + basic_machine=m68k-none + os=-os68k + ;; + pa-hitachi) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + paragon) + basic_machine=i860-intel + os=-osf + ;; + parisc) + basic_machine=hppa-unknown + os=-linux + ;; + parisc-*) + basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + pbd) + basic_machine=sparc-tti + ;; + pbb) + basic_machine=m68k-tti + ;; + pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; + pc98) + basic_machine=i386-pc + ;; + pc98-*) + basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium | p5 | k5 | k6 | nexgen | viac3) + basic_machine=i586-pc + ;; + pentiumpro | p6 | 6x86 | athlon | athlon_*) + basic_machine=i686-pc + ;; + pentiumii | pentium2 | pentiumiii | pentium3) + basic_machine=i686-pc + ;; + pentium4) + basic_machine=i786-pc + ;; + pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) + basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumpro-* | p6-* | 6x86-* | athlon-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium4-*) + basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pn) + basic_machine=pn-gould + ;; + power) basic_machine=power-ibm + ;; + ppc | ppcbe) basic_machine=powerpc-unknown + ;; + ppc-* | ppcbe-*) + basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle | ppc-le | powerpc-little) + basic_machine=powerpcle-unknown + ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64) basic_machine=powerpc64-unknown + ;; + ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64le | powerpc64little | ppc64-le | powerpc64-little) + basic_machine=powerpc64le-unknown + ;; + ppc64le-* | powerpc64little-*) + basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ps2) + basic_machine=i386-ibm + ;; + pw32) + basic_machine=i586-unknown + os=-pw32 + ;; + rdos | rdos64) + basic_machine=x86_64-pc + os=-rdos + ;; + rdos32) + basic_machine=i386-pc + os=-rdos + ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff + ;; + rm[46]00) + basic_machine=mips-siemens + ;; + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; + s390 | s390-*) + basic_machine=s390-ibm + ;; + s390x | s390x-*) + basic_machine=s390x-ibm + ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; + sb1) + basic_machine=mipsisa64sb1-unknown + ;; + sb1el) + basic_machine=mipsisa64sb1el-unknown + ;; + sde) + basic_machine=mipsisa32-sde + os=-elf + ;; + sei) + basic_machine=mips-sei + os=-seiux + ;; + sequent) + basic_machine=i386-sequent + ;; + sh) + basic_machine=sh-hitachi + os=-hms + ;; + sh5el) + basic_machine=sh5le-unknown + ;; + sh64) + basic_machine=sh64-unknown + ;; + sparclite-wrs | simso-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; + sps7) + basic_machine=m68k-bull + os=-sysv2 + ;; + spur) + basic_machine=spur-unknown + ;; + st2000) + basic_machine=m68k-tandem + ;; + stratus) + basic_machine=i860-stratus + os=-sysv4 + ;; + strongarm-* | thumb-*) + basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + sun2) + basic_machine=m68000-sun + ;; + sun2os3) + basic_machine=m68000-sun + os=-sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=-sunos4 + ;; + sun3os3) + basic_machine=m68k-sun + os=-sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=-sunos4 + ;; + sun4os3) + basic_machine=sparc-sun + os=-sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=-sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=-solaris2 + ;; + sun3 | sun3-*) + basic_machine=m68k-sun + ;; + sun4) + basic_machine=sparc-sun + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + ;; + sv1) + basic_machine=sv1-cray + os=-unicos + ;; + symmetry) + basic_machine=i386-sequent + os=-dynix + ;; + t3e) + basic_machine=alphaev5-cray + os=-unicos + ;; + t90) + basic_machine=t90-cray + os=-unicos + ;; + tile*) + basic_machine=$basic_machine-unknown + os=-linux-gnu + ;; + tx39) + basic_machine=mipstx39-unknown + ;; + tx39el) + basic_machine=mipstx39el-unknown + ;; + toad1) + basic_machine=pdp10-xkl + os=-tops20 + ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; + tpf) + basic_machine=s390x-ibm + os=-tpf + ;; + udi29k) + basic_machine=a29k-amd + os=-udi + ;; + ultra3) + basic_machine=a29k-nyu + os=-sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + os=-none + ;; + vaxv) + basic_machine=vax-dec + os=-sysv + ;; + vms) + basic_machine=vax-dec + os=-vms + ;; + vpp*|vx|vx-*) + basic_machine=f301-fujitsu + ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=-vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=-vxworks + ;; + w65*) + basic_machine=w65-wdc + os=-none + ;; + w89k-*) + basic_machine=hppa1.1-winbond + os=-proelf + ;; + xbox) + basic_machine=i686-pc + os=-mingw32 + ;; + xps | xps100) + basic_machine=xps100-honeywell + ;; + xscale-* | xscalee[bl]-*) + basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'` + ;; + ymp) + basic_machine=ymp-cray + os=-unicos + ;; + z8k-*-coff) + basic_machine=z8k-unknown + os=-sim + ;; + z80-*-coff) + basic_machine=z80-unknown + os=-sim + ;; + none) + basic_machine=none-none + os=-none + ;; + +# Here we handle the default manufacturer of certain CPU types. It is in +# some cases the only manufacturer, in others, it is the most popular. + w89k) + basic_machine=hppa1.1-winbond + ;; + op50n) + basic_machine=hppa1.1-oki + ;; + op60c) + basic_machine=hppa1.1-oki + ;; + romp) + basic_machine=romp-ibm + ;; + mmix) + basic_machine=mmix-knuth + ;; + rs6000) + basic_machine=rs6000-ibm + ;; + vax) + basic_machine=vax-dec + ;; + pdp10) + # there are many clones, so DEC is not a safe bet + basic_machine=pdp10-unknown + ;; + pdp11) + basic_machine=pdp11-dec + ;; + we32k) + basic_machine=we32k-att + ;; + sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) + basic_machine=sh-unknown + ;; + sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) + basic_machine=sparc-sun + ;; + cydra) + basic_machine=cydra-cydrome + ;; + orion) + basic_machine=orion-highlevel + ;; + orion105) + basic_machine=clipper-highlevel + ;; + mac | mpw | mac-mpw) + basic_machine=m68k-apple + ;; + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; + *-unknown) + # Make sure to match an already-canonicalized machine name. + ;; + *) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $basic_machine in + *-digital*) + basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` + ;; + *-commodore*) + basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if [ x"$os" != x"" ] +then +case $os in + # First match some system type aliases + # that might get confused with valid system types. + # -solaris* is a basic system type, with this one exception. + -auroraux) + os=-auroraux + ;; + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + -solaris) + os=-solaris2 + ;; + -svr4*) + os=-sysv4 + ;; + -unixware*) + os=-sysv4.2uw + ;; + -gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # First accept the basic system types. + # The portable systems comes first. + # Each alternative MUST END IN A *, to match a version number. + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ + | -sym* | -kopensolaris* | -plan9* \ + | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ + | -aos* | -aros* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ + | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ + | -bitrig* | -openbsd* | -solidbsd* \ + | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ + | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ + | -chorusos* | -chorusrdb* | -cegcc* \ + | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \ + | -linux-newlib* | -linux-musl* | -linux-uclibc* \ + | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \ + | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ + | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ + | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ + | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ + | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* | -tirtos*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -qnx*) + case $basic_machine in + x86-* | i*86-*) + ;; + *) + os=-nto$os + ;; + esac + ;; + -nto-qnx*) + ;; + -nto*) + os=`echo $os | sed -e 's|nto|nto-qnx|'` + ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; + -linux-dietlibc) + os=-linux-dietlibc + ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + -sunos5*) + os=`echo $os | sed -e 's|sunos5|solaris2|'` + ;; + -sunos6*) + os=`echo $os | sed -e 's|sunos6|solaris3|'` + ;; + -opened*) + os=-openedition + ;; + -os400*) + os=-os400 + ;; + -wince*) + os=-wince + ;; + -osfrose*) + os=-osfrose + ;; + -osf*) + os=-osf + ;; + -utek*) + os=-bsd + ;; + -dynix*) + os=-bsd + ;; + -acis*) + os=-aos + ;; + -atheos*) + os=-atheos + ;; + -syllable*) + os=-syllable + ;; + -386bsd) + os=-bsd + ;; + -ctix* | -uts*) + os=-sysv + ;; + -nova*) + os=-rtmk-nova + ;; + -ns2 ) + os=-nextstep2 + ;; + -nsk*) + os=-nsk + ;; + # Preserve the version number of sinix5. + -sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + -sinix*) + os=-sysv4 + ;; + -tpf*) + os=-tpf + ;; + -triton*) + os=-sysv3 + ;; + -oss*) + os=-sysv3 + ;; + -svr4) + os=-sysv4 + ;; + -svr3) + os=-sysv3 + ;; + -sysvr4) + os=-sysv4 + ;; + # This must come after -sysvr4. + -sysv*) + ;; + -ose*) + os=-ose + ;; + -es1800*) + os=-ose + ;; + -xenix) + os=-xenix + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + os=-mint + ;; + -aros*) + os=-aros + ;; + -zvmoe) + os=-zvmoe + ;; + -dicos*) + os=-dicos + ;; + -nacl*) + ;; + -none) + ;; + *) + # Get rid of the `-' at the beginning of $os. + os=`echo $os | sed 's/[^-]*-//'` + echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 + exit 1 + ;; +esac +else + +# Here we handle the default operating systems that come with various machines. +# The value should be what the vendor currently ships out the door with their +# machine or put another way, the most popular os provided with the machine. + +# Note that if you're going to try to match "-MANUFACTURER" here (say, +# "-sun"), then you have to tell the case statement up towards the top +# that MANUFACTURER isn't an operating system. Otherwise, code above +# will signal an error saying that MANUFACTURER isn't an operating +# system, and we'll never get to this point. + +case $basic_machine in + score-*) + os=-elf + ;; + spu-*) + os=-elf + ;; + *-acorn) + os=-riscix1.2 + ;; + arm*-rebel) + os=-linux + ;; + arm*-semi) + os=-aout + ;; + c4x-* | tic4x-*) + os=-coff + ;; + c8051-*) + os=-elf + ;; + hexagon-*) + os=-elf + ;; + tic54x-*) + os=-coff + ;; + tic55x-*) + os=-coff + ;; + tic6x-*) + os=-coff + ;; + # This must come before the *-dec entry. + pdp10-*) + os=-tops20 + ;; + pdp11-*) + os=-none + ;; + *-dec | vax-*) + os=-ultrix4.2 + ;; + m68*-apollo) + os=-domain + ;; + i386-sun) + os=-sunos4.0.2 + ;; + m68000-sun) + os=-sunos3 + ;; + m68*-cisco) + os=-aout + ;; + mep-*) + os=-elf + ;; + mips*-cisco) + os=-elf + ;; + mips*-*) + os=-elf + ;; + or32-*) + os=-coff + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; + sparc-* | *-sun) + os=-sunos4.1.1 + ;; + *-be) + os=-beos + ;; + *-haiku) + os=-haiku + ;; + *-ibm) + os=-aix + ;; + *-knuth) + os=-mmixware + ;; + *-wec) + os=-proelf + ;; + *-winbond) + os=-proelf + ;; + *-oki) + os=-proelf + ;; + *-hp) + os=-hpux + ;; + *-hitachi) + os=-hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=-sysv + ;; + *-cbm) + os=-amigaos + ;; + *-dg) + os=-dgux + ;; + *-dolphin) + os=-sysv3 + ;; + m68k-ccur) + os=-rtu + ;; + m88k-omron*) + os=-luna + ;; + *-next ) + os=-nextstep + ;; + *-sequent) + os=-ptx + ;; + *-crds) + os=-unos + ;; + *-ns) + os=-genix + ;; + i370-*) + os=-mvs + ;; + *-next) + os=-nextstep3 + ;; + *-gould) + os=-sysv + ;; + *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; + *-sgi) + os=-irix + ;; + *-siemens) + os=-sysv4 + ;; + *-masscomp) + os=-rtu + ;; + f30[01]-fujitsu | f700-fujitsu) + os=-uxpv + ;; + *-rom68k) + os=-coff + ;; + *-*bug) + os=-coff + ;; + *-apple) + os=-macos + ;; + *-atari*) + os=-mint + ;; + *) + os=-none + ;; +esac +fi + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +vendor=unknown +case $basic_machine in + *-unknown) + case $os in + -riscix*) + vendor=acorn + ;; + -sunos*) + vendor=sun + ;; + -cnk*|-aix*) + vendor=ibm + ;; + -beos*) + vendor=be + ;; + -hpux*) + vendor=hp + ;; + -mpeix*) + vendor=hp + ;; + -hiux*) + vendor=hitachi + ;; + -unos*) + vendor=crds + ;; + -dgux*) + vendor=dg + ;; + -luna*) + vendor=omron + ;; + -genix*) + vendor=ns + ;; + -mvs* | -opened*) + vendor=ibm + ;; + -os400*) + vendor=ibm + ;; + -ptx*) + vendor=sequent + ;; + -tpf*) + vendor=ibm + ;; + -vxsim* | -vxworks* | -windiss*) + vendor=wrs + ;; + -aux*) + vendor=apple + ;; + -hms*) + vendor=hitachi + ;; + -mpw* | -macos*) + vendor=apple + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + vendor=atari + ;; + -vos*) + vendor=stratus + ;; + esac + basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; +esac + +echo $basic_machine$os +exit + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/compat/libpng/configure b/compat/libpng/configure new file mode 100755 index 0000000..1c3e10e --- /dev/null +++ b/compat/libpng/configure @@ -0,0 +1,15812 @@ +#! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.69 for libpng 1.6.21. +# +# Report bugs to . +# +# +# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +# +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +# Use a proper internal environment variable to ensure we don't fall + # into an infinite loop, continuously re-executing ourselves. + if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then + _as_can_reexec=no; export _as_can_reexec; + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +as_fn_exit 255 + fi + # We don't want this to propagate to other subprocesses. + { _as_can_reexec=; unset _as_can_reexec;} +if test "x$CONFIG_SHELL" = x; then + as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi +" + as_required="as_fn_return () { (exit \$1); } +as_fn_success () { as_fn_return 0; } +as_fn_failure () { as_fn_return 1; } +as_fn_ret_success () { return 0; } +as_fn_ret_failure () { return 1; } + +exitcode=0 +as_fn_success || { exitcode=1; echo as_fn_success failed.; } +as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } +as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } +as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } +if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : + +else + exitcode=1; echo positional parameters were not saved. +fi +test x\$exitcode = x0 || exit 1 +test -x / || exit 1" + as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO + as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO + eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && + test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 +test \$(( 1 + 1 )) = 2 || exit 1 + + test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || ( + ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' + ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO + ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO + PATH=/empty FPATH=/empty; export PATH FPATH + test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\ + || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1" + if (eval "$as_required") 2>/dev/null; then : + as_have_required=yes +else + as_have_required=no +fi + if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : + +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_found=false +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + as_found=: + case $as_dir in #( + /*) + for as_base in sh bash ksh sh5; do + # Try only shells that exist, to save several forks. + as_shell=$as_dir/$as_base + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : + CONFIG_SHELL=$as_shell as_have_required=yes + if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : + break 2 +fi +fi + done;; + esac + as_found=false +done +$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : + CONFIG_SHELL=$SHELL as_have_required=yes +fi; } +IFS=$as_save_IFS + + + if test "x$CONFIG_SHELL" != x; then : + export CONFIG_SHELL + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +exit 255 +fi + + if test x$as_have_required = xno; then : + $as_echo "$0: This script requires a shell more modern than all" + $as_echo "$0: the shells that I found on your system." + if test x${ZSH_VERSION+set} = xset ; then + $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" + $as_echo "$0: be upgraded to zsh 4.3.4 or later." + else + $as_echo "$0: Please tell bug-autoconf@gnu.org and +$0: png-mng-implement@lists.sourceforge.net about your +$0: system, including any error possibly output before this +$0: message. Then install a modern shell, or manually run +$0: the script under such a shell if you do have one." + fi + exit 1 +fi +fi +fi +SHELL=${CONFIG_SHELL-/bin/sh} +export SHELL +# Unset more variables known to interfere with behavior of common tools. +CLICOLOR_FORCE= GREP_OPTIONS= +unset CLICOLOR_FORCE GREP_OPTIONS + +## --------------------- ## +## M4sh Shell Functions. ## +## --------------------- ## +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + + + as_lineno_1=$LINENO as_lineno_1a=$LINENO + as_lineno_2=$LINENO as_lineno_2a=$LINENO + eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && + test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { + # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } + + # If we had to re-execute with $CONFIG_SHELL, we're ensured to have + # already done that, so ensure we don't try to do so again and fall + # in an infinite loop. This has already happened in practice. + _as_can_reexec=no; export _as_can_reexec + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + +SHELL=${CONFIG_SHELL-/bin/sh} + + +test -n "$DJDIR" || exec 7<&0 &1 + +# Name of the host. +# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_clean_files= +ac_config_libobj_dir=. +LIBOBJS= +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= + +# Identity of this package. +PACKAGE_NAME='libpng' +PACKAGE_TARNAME='libpng' +PACKAGE_VERSION='1.6.21' +PACKAGE_STRING='libpng 1.6.21' +PACKAGE_BUGREPORT='png-mng-implement@lists.sourceforge.net' +PACKAGE_URL='' + +ac_unique_file="pngget.c" +# Factoring default headers for most tests. +ac_includes_default="\ +#include +#ifdef HAVE_SYS_TYPES_H +# include +#endif +#ifdef HAVE_SYS_STAT_H +# include +#endif +#ifdef STDC_HEADERS +# include +# include +#else +# ifdef HAVE_STDLIB_H +# include +# endif +#endif +#ifdef HAVE_STRING_H +# if !defined STDC_HEADERS && defined HAVE_MEMORY_H +# include +# endif +# include +#endif +#ifdef HAVE_STRINGS_H +# include +#endif +#ifdef HAVE_INTTYPES_H +# include +#endif +#ifdef HAVE_STDINT_H +# include +#endif +#ifdef HAVE_UNISTD_H +# include +#endif" + +ac_subst_vars='am__EXEEXT_FALSE +am__EXEEXT_TRUE +LTLIBOBJS +PNG_ARM_NEON_FALSE +PNG_ARM_NEON_TRUE +DO_INSTALL_LIBPNG_CONFIG_FALSE +DO_INSTALL_LIBPNG_CONFIG_TRUE +DO_INSTALL_LIBPNG_PC_FALSE +DO_INSTALL_LIBPNG_PC_TRUE +DO_INSTALL_LINKS_FALSE +DO_INSTALL_LINKS_TRUE +DO_PNG_PREFIX_FALSE +DO_PNG_PREFIX_TRUE +PNG_PREFIX +binconfigs +pkgconfigdir +PNGLIB_RELEASE +PNGLIB_MINOR +PNGLIB_MAJOR +PNGLIB_VERSION +SYMBOL_PREFIX +HAVE_LD_VERSION_SCRIPT_FALSE +HAVE_LD_VERSION_SCRIPT_TRUE +HAVE_SOLARIS_LD_FALSE +HAVE_SOLARIS_LD_TRUE +LIBOBJS +POW_LIB +PNG_COPTS +DFNCPP +LT_SYS_LIBRARY_PATH +OTOOL64 +OTOOL +LIPO +NMEDIT +DSYMUTIL +MANIFEST_TOOL +RANLIB +ac_ct_AR +AR +NM +ac_ct_DUMPBIN +DUMPBIN +LIBTOOL +OBJDUMP +DLLTOOL +AS +LN_S +CPP +LD +FGREP +EGREP +GREP +SED +host_os +host_vendor +host_cpu +host +build_os +build_vendor +build_cpu +build +am__fastdepCCAS_FALSE +am__fastdepCCAS_TRUE +CCASDEPMODE +CCASFLAGS +CCAS +am__fastdepCC_FALSE +am__fastdepCC_TRUE +CCDEPMODE +am__nodep +AMDEPBACKSLASH +AMDEP_FALSE +AMDEP_TRUE +am__quote +am__include +DEPDIR +OBJEXT +EXEEXT +ac_ct_CC +CPPFLAGS +LDFLAGS +CFLAGS +CC +MAINT +MAINTAINER_MODE_FALSE +MAINTAINER_MODE_TRUE +AM_BACKSLASH +AM_DEFAULT_VERBOSITY +AM_DEFAULT_V +AM_V +am__untar +am__tar +AMTAR +am__leading_dot +SET_MAKE +AWK +mkdir_p +MKDIR_P +INSTALL_STRIP_PROGRAM +STRIP +install_sh +MAKEINFO +AUTOHEADER +AUTOMAKE +AUTOCONF +ACLOCAL +VERSION +PACKAGE +CYGPATH_W +am__isrc +INSTALL_DATA +INSTALL_SCRIPT +INSTALL_PROGRAM +target_alias +host_alias +build_alias +LIBS +ECHO_T +ECHO_N +ECHO_C +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_URL +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL' +ac_subst_files='' +ac_user_opts=' +enable_option_checking +enable_silent_rules +enable_maintainer_mode +enable_dependency_tracking +with_gnu_ld +enable_shared +enable_static +with_pic +enable_fast_install +with_aix_soname +with_sysroot +enable_libtool_lock +enable_werror +with_zlib_prefix +with_pkgconfigdir +with_binconfigs +with_libpng_prefix +enable_unversioned_links +enable_unversioned_libpng_pc +enable_unversioned_libpng_config +enable_arm_neon +' + ac_precious_vars='build_alias +host_alias +target_alias +CC +CFLAGS +LDFLAGS +LIBS +CPPFLAGS +CCAS +CCASFLAGS +CPP +LT_SYS_LIBRARY_PATH +PNG_COPTS' + + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +ac_unrecognized_opts= +ac_unrecognized_sep= +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datarootdir='${prefix}/share' +datadir='${datarootdir}' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +includedir='${prefix}/include' +oldincludedir='/usr/include' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' + +ac_prev= +ac_dashdash= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval $ac_prev=\$ac_option + ac_prev= + continue + fi + + case $ac_option in + *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *=) ac_optarg= ;; + *) ac_optarg=yes ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=\$ac_optarg ;; + + -without-* | --without-*) + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=no ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) as_fn_error $? "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information" + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + case $ac_envvar in #( + '' | [0-9]* | *[!_$as_cr_alnum]* ) + as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; + esac + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + as_fn_error $? "missing argument to $ac_option" +fi + +if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; + fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac +fi + +# Check all directory arguments for consistency. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir +do + eval ac_val=\$$ac_var + # Remove trailing slashes. + case $ac_val in + */ ) + ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` + eval $ac_var=\$ac_val;; + esac + # Be sure to have absolute directory names. + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac + as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + as_fn_error $? "working directory cannot be determined" +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + as_fn_error $? "pwd does not report name of working directory" + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$as_myself" || +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_myself" : 'X\(//\)[^/]' \| \ + X"$as_myself" : 'X\(//\)$' \| \ + X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_myself" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures libpng 1.6.21 to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking ...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root [DATAROOTDIR/doc/libpng] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] +_ACEOF + + cat <<\_ACEOF + +Program names: + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM run sed PROGRAM on installed program names + +System types: + --build=BUILD configure for building on BUILD [guessed] + --host=HOST cross-compile to build programs to run on HOST [BUILD] +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of libpng 1.6.21:";; + esac + cat <<\_ACEOF + +Optional Features: + --disable-option-checking ignore unrecognized --enable/--with options + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --enable-silent-rules less verbose build output (undo: "make V=1") + --disable-silent-rules verbose build output (undo: "make V=0") + --enable-maintainer-mode + enable make rules and dependencies not useful (and + sometimes confusing) to the casual installer + --enable-dependency-tracking + do not reject slow dependency extractors + --disable-dependency-tracking + speeds up one-time build + --enable-shared[=PKGS] build shared libraries [default=yes] + --enable-static[=PKGS] build static libraries [default=yes] + --enable-fast-install[=PKGS] + optimize for fast installation [default=yes] + --disable-libtool-lock avoid locking (might break parallel builds) + --enable-werror[=OPT] Pass -Werror or the given argument to the compiler + if it is supported + --enable-unversioned-links + Installed libpng header files are placed in a + versioned subdirectory and installed libpng library + (including DLL) files are versioned. If this option + is enabled unversioned links will be created + pointing to the corresponding installed files. If + you use libpng.pc or libpng-config for all builds + you do not need these links, but if you compile + programs directly they will typically #include + and link with -lpng; in that case you need + the links. The links can be installed manually using + 'make install-header-links' and 'make + install-library-links' and can be removed using the + corresponding uninstall- targets. If you do enable + this option every libpng 'make install' will + recreate the links to point to the just installed + version of libpng. The default is to create the + links; use --disable-unversioned-links to change + this + --enable-unversioned-libpng-pc + Install the configuration file 'libpng.pc' as a link + to the versioned version. This is done by default - + use --disable-unversioned-libpng-pc to change this. + --enable-unversioned-libpng-config + Install the configuration file 'libpng-config' as a + link to the versioned version. This is done by + default - use --disable-unversioned-libpng-config to + change this. + --enable-arm-neon Enable ARM NEON optimizations: =no/off, check, api, + yes/on: no/off: disable the optimizations; check: + use internal checking code (deprecated and poorly + supported); api: disable by default, enable by a + call to png_set_option; yes/on: turn on + unconditionally. If not specified: determined by the + compiler. + +Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-gnu-ld assume the C compiler uses GNU ld [default=no] + --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use + both] + --with-aix-soname=aix|svr4|both + shared library versioning (aka "SONAME") variant to + provide on AIX, [default=aix]. + --with-sysroot[=DIR] Search for dependent libraries within DIR (or the + compiler's sysroot if not specified). + --with-zlib-prefix prefix that may have been used in installed zlib + --with-pkgconfigdir Use the specified pkgconfig dir (default is + libdir/pkgconfig) + --with-binconfigs Generate shell libpng-config scripts as well as + pkg-config data [default=yes] + --with-libpng-prefix prefix libpng exported function (API) names with the + given value + +Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory + LIBS libraries to pass to the linker, e.g. -l + CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if + you have headers in a nonstandard directory + CCAS assembler compiler command (defaults to CC) + CCASFLAGS assembler compiler flags (defaults to CFLAGS) + CPP C preprocessor + LT_SYS_LIBRARY_PATH + User-defined run-time library search path. + PNG_COPTS additional flags for the C compiler, use this for options that + would cause configure itself to fail + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +Report bugs to . +_ACEOF +ac_status=$? +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +fi + +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +libpng configure 1.6.21 +generated by GNU Autoconf 2.69 + +Copyright (C) 2012 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit +fi + +## ------------------------ ## +## Autoconf initialization. ## +## ------------------------ ## + +# ac_fn_c_try_compile LINENO +# -------------------------- +# Try to compile conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_compile + +# ac_fn_c_try_cpp LINENO +# ---------------------- +# Try to preprocess conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_cpp () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } > conftest.i && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_cpp + +# ac_fn_c_try_link LINENO +# ----------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_link () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext conftest$ac_exeext + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + test -x conftest$ac_exeext + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information + # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would + # interfere with the next link command; also delete a directory that is + # left behind by Apple's compiler. We do this before executing the actions. + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_link + +# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists and can be compiled using the include files in +# INCLUDES, setting the cache variable VAR accordingly. +ac_fn_c_check_header_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_header_compile + +# ac_fn_c_try_run LINENO +# ---------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes +# that executables *can* be run. +ac_fn_c_try_run () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then : + ac_retval=0 +else + $as_echo "$as_me: program exited with status $ac_status" >&5 + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=$ac_status +fi + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_run + +# ac_fn_c_check_func LINENO FUNC VAR +# ---------------------------------- +# Tests whether FUNC exists, setting the cache variable VAR accordingly +ac_fn_c_check_func () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Define $2 to an innocuous variant, in case declares $2. + For example, HP-UX 11i declares gettimeofday. */ +#define $2 innocuous_$2 + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $2 (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $2 + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $2 (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$2 || defined __stub___$2 +choke me +#endif + +int +main () +{ +return $2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_func + +# ac_fn_c_check_type LINENO TYPE VAR INCLUDES +# ------------------------------------------- +# Tests whether TYPE exists after having included INCLUDES, setting cache +# variable VAR accordingly. +ac_fn_c_check_type () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=no" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +if (sizeof ($2)) + return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +if (sizeof (($2))) + return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + eval "$3=yes" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_type +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by libpng $as_me 1.6.21, which was +generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + $as_echo "PATH: $as_dir" + done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; + 2) + as_fn_append ac_configure_args1 " '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + as_fn_append ac_configure_args " '$ac_arg'" + ;; + esac + done +done +{ ac_configure_args0=; unset ac_configure_args0;} +{ ac_configure_args1=; unset ac_configure_args1;} + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + $as_echo "## ---------------- ## +## Cache variables. ## +## ---------------- ##" + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + (set) 2>&1 | + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + sed -n \ + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( + *) + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) + echo + + $as_echo "## ----------------- ## +## Output variables. ## +## ----------------- ##" + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + $as_echo "## ------------------- ## +## File substitutions. ## +## ------------------- ##" + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi + + if test -s confdefs.h; then + $as_echo "## ----------- ## +## confdefs.h. ## +## ----------- ##" + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + $as_echo "$as_me: caught signal $ac_signal" + $as_echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -f -r conftest* confdefs.h + +$as_echo "/* confdefs.h */" > confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_URL "$PACKAGE_URL" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer an explicitly selected file to automatically selected ones. +ac_site_file1=NONE +ac_site_file2=NONE +if test -n "$CONFIG_SITE"; then + # We do not want a PATH search for config.site. + case $CONFIG_SITE in #(( + -*) ac_site_file1=./$CONFIG_SITE;; + */*) ac_site_file1=$CONFIG_SITE;; + *) ac_site_file1=./$CONFIG_SITE;; + esac +elif test "x$prefix" != xNONE; then + ac_site_file1=$prefix/share/config.site + ac_site_file2=$prefix/etc/config.site +else + ac_site_file1=$ac_default_prefix/share/config.site + ac_site_file2=$ac_default_prefix/etc/config.site +fi +for ac_site_file in "$ac_site_file1" "$ac_site_file2" +do + test "x$ac_site_file" = xNONE && continue + if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 +$as_echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" \ + || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "failed to load site script $ac_site_file +See \`config.log' for more details" "$LINENO" 5; } + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special files + # actually), so we avoid doing that. DJGPP emulates it as a regular file. + if test /dev/null != "$cache_file" && test -f "$cache_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 +$as_echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi +else + { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 +$as_echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 +$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 +$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 +$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) as_fn_append ac_configure_args " '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 +$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} + as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 +fi +## -------------------- ## +## Main body of script. ## +## -------------------- ## + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + +# libpng does not follow GNU file name conventions (hence 'foreign') +# color-tests requires automake 1.11 or later +# silent-rules requires automake 1.11 or later +# dist-xz requires automake 1.11 or later +# 1.12.2 fixes a security issue in 1.11.2 and 1.12.1 +# 1.13 is required for parallel tests +am__api_version='1.15' + +ac_aux_dir= +for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do + if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 +fi + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +# Reject install programs that cannot install multiple files. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 +$as_echo_n "checking for a BSD-compatible install... " >&6; } +if test -z "$INSTALL"; then +if ${ac_cv_path_install+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in #(( + ./ | .// | /[cC]/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + fi + done + done + ;; +esac + + done +IFS=$as_save_IFS + +rm -rf conftest.one conftest.two conftest.dir + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 +$as_echo "$INSTALL" >&6; } + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 +$as_echo_n "checking whether build environment is sane... " >&6; } +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[\\\"\#\$\&\'\`$am_lf]*) + as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; +esac +case $srcdir in + *[\\\"\#\$\&\'\`$am_lf\ \ ]*) + as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; +esac + +# Do 'set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + am_has_slept=no + for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + if test "$*" != "X $srcdir/configure conftest.file" \ + && test "$*" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + as_fn_error $? "ls -t appears to fail. Make sure there is not a broken + alias in your environment" "$LINENO" 5 + fi + if test "$2" = conftest.file || test $am_try -eq 2; then + break + fi + # Just in case. + sleep 1 + am_has_slept=yes + done + test "$2" = conftest.file + ) +then + # Ok. + : +else + as_fn_error $? "newly created file is older than distributed files! +Check your system clock" "$LINENO" 5 +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +# If we didn't sleep, we still need to ensure time stamps of config.status and +# generated files are strictly newer. +am_sleep_pid= +if grep 'slept: no' conftest.file >/dev/null 2>&1; then + ( sleep 1 ) & + am_sleep_pid=$! +fi + +rm -f conftest.file + +test "$program_prefix" != NONE && + program_transform_name="s&^&$program_prefix&;$program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s&\$&$program_suffix&;$program_transform_name" +# Double any \ or $. +# By default was `s,x,x', remove it if useless. +ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' +program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` + +# Expand $ac_aux_dir to an absolute path. +am_aux_dir=`cd "$ac_aux_dir" && pwd` + +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --is-lightweight"; then + am_missing_run="$MISSING " +else + am_missing_run= + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 +$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} +fi + +if test x"${install_sh+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi + +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the 'STRIP' environment variable to overrule this program. +if test "$cross_compiling" != no; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 +$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } +if test -z "$MKDIR_P"; then + if ${ac_cv_path_mkdir+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in mkdir gmkdir; do + for ac_exec_ext in '' $ac_executable_extensions; do + as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue + case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( + 'mkdir (GNU coreutils) '* | \ + 'mkdir (coreutils) '* | \ + 'mkdir (fileutils) '4.1*) + ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext + break 3;; + esac + done + done + done +IFS=$as_save_IFS + +fi + + test -d ./--version && rmdir ./--version + if test "${ac_cv_path_mkdir+set}" = set; then + MKDIR_P="$ac_cv_path_mkdir -p" + else + # As a last resort, use the slow shell script. Don't cache a + # value for MKDIR_P within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + MKDIR_P="$ac_install_sh -d" + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 +$as_echo "$MKDIR_P" >&6; } + +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AWK+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AWK="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 +$as_echo "$AWK" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AWK" && break +done + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + +rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null + +# Check whether --enable-silent-rules was given. +if test "${enable_silent_rules+set}" = set; then : + enableval=$enable_silent_rules; +fi + +case $enable_silent_rules in # ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=1;; +esac +am_make=${MAKE-make} +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 +$as_echo_n "checking whether $am_make supports nested variables... " >&6; } +if ${am_cv_make_support_nested_variables+:} false; then : + $as_echo_n "(cached) " >&6 +else + if $as_echo 'TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 +$as_echo "$am_cv_make_support_nested_variables" >&6; } +if test $am_cv_make_support_nested_variables = yes; then + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AM_BACKSLASH='\' + +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + am__isrc=' -I$(srcdir)' + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi + + +# Define the identity of the package. + PACKAGE='libpng' + VERSION='1.6.21' + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE "$PACKAGE" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define VERSION "$VERSION" +_ACEOF + +# Some tools Automake needs. + +ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} + + +AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} + + +AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} + + +AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} + + +MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# +# +mkdir_p='$(MKDIR_P)' + +# We need awk for the "check" target (and possibly the TAP driver). The +# system "awk" is bad on some platforms. +# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AMTAR='$${TAR-tar}' + + +# We'll loop over all known methods to create a tar archive until one works. +_am_tools='gnutar pax cpio none' + +am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' + + + + + + +# POSIX will say in a future version that running "rm -f" with no argument +# is OK; and we want to be able to make that assumption in our Makefile +# recipes. So use an aggressive probe to check that the usage we want is +# actually supported "in the wild" to an acceptable degree. +# See automake bug#10828. +# To make any issue more visible, cause the running configure to be aborted +# by default if the 'rm' program in use doesn't match our expectations; the +# user can still override this though. +if rm -f && rm -fr && rm -rf; then : OK; else + cat >&2 <<'END' +Oops! + +Your 'rm' program seems unable to run without file operands specified +on the command line, even when the '-f' option is present. This is contrary +to the behaviour of most rm programs out there, and not conforming with +the upcoming POSIX standard: + +Please tell bug-automake@gnu.org about your system, including the value +of your $PATH and any error possibly output before this message. This +can help us improve future automake versions. + +END + if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then + echo 'Configuration will proceed anyway, since you have set the' >&2 + echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 + echo >&2 + else + cat >&2 <<'END' +Aborting the configuration process, to ensure you take notice of the issue. + +You can download and install GNU coreutils to get an 'rm' implementation +that behaves properly: . + +If you want to complete the configuration process using your problematic +'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM +to "yes", and re-run configure. + +END + as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 + fi +fi + +# The following line causes --disable-maintainer-mode to be the default to +# configure, this is necessary because libpng distributions cannot rely on the +# time stamps of the autotools generated files being correct + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5 +$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } + # Check whether --enable-maintainer-mode was given. +if test "${enable_maintainer_mode+set}" = set; then : + enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval +else + USE_MAINTAINER_MODE=no +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5 +$as_echo "$USE_MAINTAINER_MODE" >&6; } + if test $USE_MAINTAINER_MODE = yes; then + MAINTAINER_MODE_TRUE= + MAINTAINER_MODE_FALSE='#' +else + MAINTAINER_MODE_TRUE='#' + MAINTAINER_MODE_FALSE= +fi + + MAINT=$MAINTAINER_MODE_TRUE + + + + +PNGLIB_VERSION=1.6.21 +PNGLIB_MAJOR=1 +PNGLIB_MINOR=6 +PNGLIB_RELEASE=21 + + + +ac_config_headers="$ac_config_headers config.h" + + +# Checks for programs. +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + fi +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl.exe +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_CC" && break +done + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +fi + +fi + + +test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "no acceptable C compiler found in \$PATH +See \`config.log' for more details" "$LINENO" 5; } + +# Provide some information about the compiler. +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done + +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } +ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` + +# The possible output files: +ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" + +ac_rmfiles= +for ac_file in $ac_files +do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac +done +rm -f $ac_rmfiles + +if { { ac_try="$ac_link_default" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link_default") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files '' +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an `-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. + break;; + * ) + break;; + esac +done +test "$ac_cv_exeext" = no && ac_cv_exeext= + +else + ac_file='' +fi +if test -z "$ac_file"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "C compiler cannot create executables +See \`config.log' for more details" "$LINENO" 5; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } +ac_exeext=$ac_cv_exeext + +rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 +$as_echo_n "checking for suffix of executables... " >&6; } +if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + break;; + * ) break;; + esac +done +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest conftest$ac_cv_exeext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 +$as_echo "$ac_cv_exeext" >&6; } + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +FILE *f = fopen ("conftest.out", "w"); + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} +_ACEOF +ac_clean_files="$ac_clean_files conftest.out" +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +if test "$cross_compiling" != yes; then + { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if { ac_try='./conftest$ac_cv_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details" "$LINENO" 5; } + fi + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } + +rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 +$as_echo_n "checking for suffix of object files... " >&6; } +if ${ac_cv_objext+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of object files: cannot compile +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 +$as_echo "$ac_cv_objext" >&6; } +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +if ${ac_cv_c_compiler_gnu+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_compiler_gnu=yes +else + ac_compiler_gnu=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes +else + GCC= +fi +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } +if ${ac_cv_prog_cc_g+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +else + CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if ${ac_cv_prog_cc_c89+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +struct stat; +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c89=$ac_arg +fi +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; +esac +if test "x$ac_cv_prog_cc_c89" != xno; then : + +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 +$as_echo_n "checking whether $CC understands -c and -o together... " >&6; } +if ${am_cv_prog_cc_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF + # Make sure it works both with $CC and with simple cc. + # Following AC_PROG_CC_C_O, we do the test twice because some + # compilers refuse to overwrite an existing .o file with -o, + # though they will create one. + am_cv_prog_cc_c_o=yes + for am_i in 1 2; do + if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 + ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } \ + && test -f conftest2.$ac_objext; then + : OK + else + am_cv_prog_cc_c_o=no + break + fi + done + rm -f core conftest* + unset am_i +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 +$as_echo "$am_cv_prog_cc_c_o" >&6; } +if test "$am_cv_prog_cc_c_o" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +DEPDIR="${am__leading_dot}deps" + +ac_config_commands="$ac_config_commands depfiles" + + +am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 +$as_echo_n "checking for style of include used by $am_make... " >&6; } +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from 'make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 +$as_echo "$_am_result" >&6; } +rm -f confinc confmf + +# Check whether --enable-dependency-tracking was given. +if test "${enable_dependency_tracking+set}" = set; then : + enableval=$enable_dependency_tracking; +fi + +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + am__nodep='_no' +fi + if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' +else + AMDEP_TRUE='#' + AMDEP_FALSE= +fi + + + +depcc="$CC" am_compiler_list= + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if ${am_cv_CC_dependencies_compiler_type+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CC_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + am__universal=false + case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_CC_dependencies_compiler_type=none +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } +CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= + am__fastdepCC_FALSE='#' +else + am__fastdepCC_TRUE='#' + am__fastdepCC_FALSE= +fi + + +# By default we simply use the C compiler to build assembly code. + +test "${CCAS+set}" = set || CCAS=$CC +test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS + + + +depcc="$CCAS" am_compiler_list= + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if ${am_cv_CCAS_dependencies_compiler_type+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CCAS_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + am__universal=false + + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CCAS_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_CCAS_dependencies_compiler_type=none +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CCAS_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CCAS_dependencies_compiler_type" >&6; } +CCASDEPMODE=depmode=$am_cv_CCAS_dependencies_compiler_type + + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CCAS_dependencies_compiler_type" = gcc3; then + am__fastdepCCAS_TRUE= + am__fastdepCCAS_FALSE='#' +else + am__fastdepCCAS_TRUE='#' + am__fastdepCCAS_FALSE= +fi + + +# Make sure we can run config.sub. +$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || + as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 +$as_echo_n "checking build system type... " >&6; } +if ${ac_cv_build+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_build_alias=$build_alias +test "x$ac_build_alias" = x && + ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` +test "x$ac_build_alias" = x && + as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 +ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 +$as_echo "$ac_cv_build" >&6; } +case $ac_cv_build in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; +esac +build=$ac_cv_build +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_build +shift +build_cpu=$1 +build_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +build_os=$* +IFS=$ac_save_IFS +case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 +$as_echo_n "checking host system type... " >&6; } +if ${ac_cv_host+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "x$host_alias" = x; then + ac_cv_host=$ac_cv_build +else + ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 +$as_echo "$ac_cv_host" >&6; } +case $ac_cv_host in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; +esac +host=$ac_cv_host +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_host +shift +host_cpu=$1 +host_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +host_os=$* +IFS=$ac_save_IFS +case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 +$as_echo_n "checking for a sed that does not truncate output... " >&6; } +if ${ac_cv_path_SED+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ + for ac_i in 1 2 3 4 5 6 7; do + ac_script="$ac_script$as_nl$ac_script" + done + echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed + { ac_script=; unset ac_script;} + if test -z "$SED"; then + ac_path_SED_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_SED" || continue +# Check for GNU ac_path_SED and select it if it is found. + # Check for GNU $ac_path_SED +case `"$ac_path_SED" --version 2>&1` in +*GNU*) + ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo '' >> "conftest.nl" + "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_SED_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_SED="$ac_path_SED" + ac_path_SED_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_SED_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_SED"; then + as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 + fi +else + ac_cv_path_SED=$SED +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 +$as_echo "$ac_cv_path_SED" >&6; } + SED="$ac_cv_path_SED" + rm -f conftest.sed + +test -z "$SED" && SED=sed +Xsed="$SED -e 1s/^X//" + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 +$as_echo_n "checking for grep that handles long lines and -e... " >&6; } +if ${ac_cv_path_GREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$GREP"; then + ac_path_GREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in grep ggrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_GREP" || continue +# Check for GNU ac_path_GREP and select it if it is found. + # Check for GNU $ac_path_GREP +case `"$ac_path_GREP" --version 2>&1` in +*GNU*) + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_GREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_GREP="$ac_path_GREP" + ac_path_GREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_GREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_GREP"; then + as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_GREP=$GREP +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 +$as_echo "$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 +$as_echo_n "checking for egrep... " >&6; } +if ${ac_cv_path_EGREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 + then ac_cv_path_EGREP="$GREP -E" + else + if test -z "$EGREP"; then + ac_path_EGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in egrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_EGREP" || continue +# Check for GNU ac_path_EGREP and select it if it is found. + # Check for GNU $ac_path_EGREP +case `"$ac_path_EGREP" --version 2>&1` in +*GNU*) + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_EGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP="$ac_path_EGREP" + ac_path_EGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_EGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_EGREP"; then + as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_EGREP=$EGREP +fi + + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 +$as_echo "$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 +$as_echo_n "checking for fgrep... " >&6; } +if ${ac_cv_path_FGREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 + then ac_cv_path_FGREP="$GREP -F" + else + if test -z "$FGREP"; then + ac_path_FGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in fgrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_FGREP" || continue +# Check for GNU ac_path_FGREP and select it if it is found. + # Check for GNU $ac_path_FGREP +case `"$ac_path_FGREP" --version 2>&1` in +*GNU*) + ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'FGREP' >> "conftest.nl" + "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_FGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_FGREP="$ac_path_FGREP" + ac_path_FGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_FGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_FGREP"; then + as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_FGREP=$FGREP +fi + + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 +$as_echo "$ac_cv_path_FGREP" >&6; } + FGREP="$ac_cv_path_FGREP" + + +test -z "$GREP" && GREP=grep + + + + + + + + + + + + + + + + + +ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 +$as_echo_n "checking how to print strings... " >&6; } +# Test print first, because it will be a builtin if present. +if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' +elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='printf %s\n' +else + # Use this function as a fallback that always works. + func_fallback_echo () + { + eval 'cat <<_LTECHO_EOF +$1 +_LTECHO_EOF' + } + ECHO='func_fallback_echo' +fi + +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "" +} + +case $ECHO in + printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 +$as_echo "printf" >&6; } ;; + print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 +$as_echo "print -r" >&6; } ;; + *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 +$as_echo "cat" >&6; } ;; +esac + + + + + + + + + + + + + + + + +# Check whether --with-gnu-ld was given. +if test "${with_gnu_ld+set}" = set; then : + withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes +else + with_gnu_ld=no +fi + +ac_prog=ld +if test yes = "$GCC"; then + # Check if gcc -print-prog-name=ld gives a path. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 +$as_echo_n "checking for ld used by $CC... " >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return, which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [\\/]* | ?:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD=$ac_prog + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test yes = "$with_gnu_ld"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 +$as_echo_n "checking for GNU ld... " >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 +$as_echo_n "checking for non-GNU ld... " >&6; } +fi +if ${lt_cv_path_LD+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$LD"; then + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS=$lt_save_ifs + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD=$ac_dir/$ac_prog + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &5 +$as_echo "$LD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 +$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } +if ${lt_cv_prog_gnu_ld+:} false; then : + $as_echo_n "(cached) " >&6 +else + # I'd rather use --version here, but apparently some GNU lds only accept -v. +case `$LD -v 2>&1 &5 +$as_echo "$lt_cv_prog_gnu_ld" >&6; } +with_gnu_ld=$lt_cv_prog_gnu_ld + + + + + + + + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 +$as_echo_n "checking how to run the C preprocessor... " >&6; } +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if ${ac_cv_prog_CPP+:} false; then : + $as_echo_n "(cached) " >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + break +fi + + done + ac_cv_prog_CPP=$CPP + +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 +$as_echo "$CPP" >&6; } +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details" "$LINENO" 5; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AWK+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AWK="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 +$as_echo "$AWK" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AWK" && break +done + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 +$as_echo_n "checking whether ln -s works... " >&6; } +LN_S=$as_ln_s +if test "$LN_S" = "ln -s"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 +$as_echo "no, using $LN_S" >&6; } +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + + +case `pwd` in + *\ * | *\ *) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 +$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; +esac + + + +macro_version='2.4.6' +macro_revision='2.4.6' + + + + + + + + + + + + + +ltmain=$ac_aux_dir/ltmain.sh + +# Backslashify metacharacters that are still active within +# double-quoted strings. +sed_quote_subst='s/\(["`$\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 +$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } +if ${lt_cv_path_NM+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM=$NM +else + lt_nm_to_check=${ac_tool_prefix}nm + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" + fi + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS=$lt_save_ifs + test -z "$ac_dir" && ac_dir=. + tmp_nm=$ac_dir/$lt_tmp_nm + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the 'sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty + case $build_os in + mingw*) lt_bad_file=conftest.nm/nofile ;; + *) lt_bad_file=/dev/null ;; + esac + case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in + *$lt_bad_file* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break 2 + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break 2 + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + ;; + esac + fi + done + IFS=$lt_save_ifs + done + : ${lt_cv_path_NM=no} +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 +$as_echo "$lt_cv_path_NM" >&6; } +if test no != "$lt_cv_path_NM"; then + NM=$lt_cv_path_NM +else + # Didn't find any BSD compatible name lister, look for dumpbin. + if test -n "$DUMPBIN"; then : + # Let the user override the test. + else + if test -n "$ac_tool_prefix"; then + for ac_prog in dumpbin "link -dump" + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DUMPBIN+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DUMPBIN"; then + ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DUMPBIN=$ac_cv_prog_DUMPBIN +if test -n "$DUMPBIN"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 +$as_echo "$DUMPBIN" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$DUMPBIN" && break + done +fi +if test -z "$DUMPBIN"; then + ac_ct_DUMPBIN=$DUMPBIN + for ac_prog in dumpbin "link -dump" +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DUMPBIN"; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN +if test -n "$ac_ct_DUMPBIN"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 +$as_echo "$ac_ct_DUMPBIN" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_DUMPBIN" && break +done + + if test "x$ac_ct_DUMPBIN" = x; then + DUMPBIN=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DUMPBIN=$ac_ct_DUMPBIN + fi +fi + + case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in + *COFF*) + DUMPBIN="$DUMPBIN -symbols -headers" + ;; + *) + DUMPBIN=: + ;; + esac + fi + + if test : != "$DUMPBIN"; then + NM=$DUMPBIN + fi +fi +test -z "$NM" && NM=nm + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 +$as_echo_n "checking the name lister ($NM) interface... " >&6; } +if ${lt_cv_nm_interface+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_nm_interface="BSD nm" + echo "int some_variable = 0;" > conftest.$ac_ext + (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) + (eval "$ac_compile" 2>conftest.err) + cat conftest.err >&5 + (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) + cat conftest.err >&5 + (eval echo "\"\$as_me:$LINENO: output\"" >&5) + cat conftest.out >&5 + if $GREP 'External.*some_variable' conftest.out > /dev/null; then + lt_cv_nm_interface="MS dumpbin" + fi + rm -f conftest* +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 +$as_echo "$lt_cv_nm_interface" >&6; } + +# find the maximum length of command line arguments +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 +$as_echo_n "checking the maximum length of command line arguments... " >&6; } +if ${lt_cv_sys_max_cmd_len+:} false; then : + $as_echo_n "(cached) " >&6 +else + i=0 + teststring=ABCD + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw* | cegcc*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + mint*) + # On MiNT this can take a long time and run out of memory. + lt_cv_sys_max_cmd_len=8192; + ;; + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; + + os2*) + # The test takes a long time on OS/2. + lt_cv_sys_max_cmd_len=8192 + ;; + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) + lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` + if test -n "$lt_cv_sys_max_cmd_len" && \ + test undefined != "$lt_cv_sys_max_cmd_len"; then + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + else + # Make teststring a little bigger before we do anything with it. + # a 1K string should be a reasonable start. + for i in 1 2 3 4 5 6 7 8; do + teststring=$teststring$teststring + done + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while { test X`env echo "$teststring$teststring" 2>/dev/null` \ + = "X$teststring$teststring"; } >/dev/null 2>&1 && + test 17 != "$i" # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + # Only check the string length outside the loop. + lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` + teststring= + # Add a significant safety factor because C++ compilers can tack on + # massive amounts of additional arguments before passing them to the + # linker. It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + fi + ;; + esac + +fi + +if test -n "$lt_cv_sys_max_cmd_len"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 +$as_echo "$lt_cv_sys_max_cmd_len" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 +$as_echo "none" >&6; } +fi +max_cmd_len=$lt_cv_sys_max_cmd_len + + + + + + +: ${CP="cp -f"} +: ${MV="mv -f"} +: ${RM="rm -f"} + +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + lt_unset=unset +else + lt_unset=false +fi + + + + + +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + lt_SP2NL='tr \040 \012' + lt_NL2SP='tr \015\012 \040\040' + ;; + *) # EBCDIC based system + lt_SP2NL='tr \100 \n' + lt_NL2SP='tr \r\n \100\100' + ;; +esac + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 +$as_echo_n "checking how to convert $build file names to $host format... " >&6; } +if ${lt_cv_to_host_file_cmd+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 + ;; + esac + ;; + *-*-cygwin* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin + ;; + esac + ;; + * ) # unhandled hosts (and "normal" native builds) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; +esac + +fi + +to_host_file_cmd=$lt_cv_to_host_file_cmd +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 +$as_echo "$lt_cv_to_host_file_cmd" >&6; } + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 +$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } +if ${lt_cv_to_tool_file_cmd+:} false; then : + $as_echo_n "(cached) " >&6 +else + #assume ordinary cross tools, or native build. +lt_cv_to_tool_file_cmd=func_convert_file_noop +case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 + ;; + esac + ;; +esac + +fi + +to_tool_file_cmd=$lt_cv_to_tool_file_cmd +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 +$as_echo "$lt_cv_to_tool_file_cmd" >&6; } + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 +$as_echo_n "checking for $LD option to reload object files... " >&6; } +if ${lt_cv_ld_reload_flag+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_reload_flag='-r' +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 +$as_echo "$lt_cv_ld_reload_flag" >&6; } +reload_flag=$lt_cv_ld_reload_flag +case $reload_flag in +"" | " "*) ;; +*) reload_flag=" $reload_flag" ;; +esac +reload_cmds='$LD$reload_flag -o $output$reload_objs' +case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + if test yes != "$GCC"; then + reload_cmds=false + fi + ;; + darwin*) + if test yes = "$GCC"; then + reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs' + else + reload_cmds='$LD$reload_flag -o $output$reload_objs' + fi + ;; +esac + + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. +set dummy ${ac_tool_prefix}objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OBJDUMP"; then + ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OBJDUMP=$ac_cv_prog_OBJDUMP +if test -n "$OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 +$as_echo "$OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OBJDUMP"; then + ac_ct_OBJDUMP=$OBJDUMP + # Extract the first word of "objdump", so it can be a program name with args. +set dummy objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OBJDUMP"; then + ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OBJDUMP="objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP +if test -n "$ac_ct_OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 +$as_echo "$ac_ct_OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OBJDUMP" = x; then + OBJDUMP="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OBJDUMP=$ac_ct_OBJDUMP + fi +else + OBJDUMP="$ac_cv_prog_OBJDUMP" +fi + +test -z "$OBJDUMP" && OBJDUMP=objdump + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 +$as_echo_n "checking how to recognize dependent libraries... " >&6; } +if ${lt_cv_deplibs_check_method+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# 'unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [[regex]]' -- check by looking for files in library path +# that responds to the $file_magic_cmd with a given extended regex. +# If you have 'file' or equivalent on your system and you're not sure +# whether 'pass_all' will *always* work, you probably want this one. + +case $host_os in +aix[4-9]*) + lt_cv_deplibs_check_method=pass_all + ;; + +beos*) + lt_cv_deplibs_check_method=pass_all + ;; + +bsdi[45]*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; + +cygwin*) + # func_win32_libid is a shell function defined in ltmain.sh + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + ;; + +mingw* | pw32*) + # Base MSYS/MinGW do not provide the 'file' command needed by + # func_win32_libid shell function, so use a weaker test based on 'objdump', + # unless we find 'file', for example because we are cross-compiling. + if ( file / ) >/dev/null 2>&1; then + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else + # Keep this pattern in sync with the one in func_win32_libid. + lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; + +cegcc*) + # use the weaker test based on 'objdump'. See mingw*. + lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; + +freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +haiku*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +interix[3-9]*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' + ;; + +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +*nto* | *qnx*) + lt_cv_deplibs_check_method=pass_all + ;; + +openbsd* | bitrig*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + fi + ;; + +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; + +rdos*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +tpf*) + lt_cv_deplibs_check_method=pass_all + ;; +os2*) + lt_cv_deplibs_check_method=pass_all + ;; +esac + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 +$as_echo "$lt_cv_deplibs_check_method" >&6; } + +file_magic_glob= +want_nocaseglob=no +if test "$build" = "$host"; then + case $host_os in + mingw* | pw32*) + if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then + want_nocaseglob=yes + else + file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"` + fi + ;; + esac +fi + +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown + + + + + + + + + + + + + + + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. +set dummy ${ac_tool_prefix}dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DLLTOOL"; then + ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DLLTOOL=$ac_cv_prog_DLLTOOL +if test -n "$DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 +$as_echo "$DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_DLLTOOL"; then + ac_ct_DLLTOOL=$DLLTOOL + # Extract the first word of "dlltool", so it can be a program name with args. +set dummy dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DLLTOOL"; then + ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DLLTOOL="dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL +if test -n "$ac_ct_DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 +$as_echo "$ac_ct_DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_DLLTOOL" = x; then + DLLTOOL="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DLLTOOL=$ac_ct_DLLTOOL + fi +else + DLLTOOL="$ac_cv_prog_DLLTOOL" +fi + +test -z "$DLLTOOL" && DLLTOOL=dlltool + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 +$as_echo_n "checking how to associate runtime and link libraries... " >&6; } +if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_sharedlib_from_linklib_cmd='unknown' + +case $host_os in +cygwin* | mingw* | pw32* | cegcc*) + # two different shell functions defined in ltmain.sh; + # decide which one to use based on capabilities of $DLLTOOL + case `$DLLTOOL --help 2>&1` in + *--identify-strict*) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib + ;; + *) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback + ;; + esac + ;; +*) + # fallback: assume linklib IS sharedlib + lt_cv_sharedlib_from_linklib_cmd=$ECHO + ;; +esac + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 +$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } +sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd +test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO + + + + + + + + +if test -n "$ac_tool_prefix"; then + for ac_prog in ar + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AR="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AR=$ac_cv_prog_AR +if test -n "$AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 +$as_echo "$AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AR" && break + done +fi +if test -z "$AR"; then + ac_ct_AR=$AR + for ac_prog in ar +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_AR="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_AR=$ac_cv_prog_ac_ct_AR +if test -n "$ac_ct_AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 +$as_echo "$ac_ct_AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_AR" && break +done + + if test "x$ac_ct_AR" = x; then + AR="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AR=$ac_ct_AR + fi +fi + +: ${AR=ar} +: ${AR_FLAGS=cru} + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 +$as_echo_n "checking for archiver @FILE support... " >&6; } +if ${lt_cv_ar_at_file+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ar_at_file=no + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + echo conftest.$ac_objext > conftest.lst + lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' + { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 + (eval $lt_ar_try) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if test 0 -eq "$ac_status"; then + # Ensure the archiver fails upon bogus file names. + rm -f conftest.$ac_objext libconftest.a + { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 + (eval $lt_ar_try) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if test 0 -ne "$ac_status"; then + lt_cv_ar_at_file=@ + fi + fi + rm -f conftest.* libconftest.a + +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 +$as_echo "$lt_cv_ar_at_file" >&6; } + +if test no = "$lt_cv_ar_at_file"; then + archiver_list_spec= +else + archiver_list_spec=$lt_cv_ar_at_file +fi + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +test -z "$STRIP" && STRIP=: + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_RANLIB+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 +$as_echo "$RANLIB" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 +$as_echo "$ac_ct_RANLIB" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_RANLIB" = x; then + RANLIB=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + RANLIB=$ac_ct_RANLIB + fi +else + RANLIB="$ac_cv_prog_RANLIB" +fi + +test -z "$RANLIB" && RANLIB=: + + + + + + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + bitrig* | openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" +fi + +case $host_os in + darwin*) + lock_old_archive_extraction=yes ;; + *) + lock_old_archive_extraction=no ;; +esac + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# Check for command to grab the raw symbol name followed by C symbol from nm. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 +$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } +if ${lt_cv_sys_global_symbol_pipe+:} false; then : + $as_echo_n "(cached) " >&6 +else + +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[BCDEGRST]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([_A-Za-z][_A-Za-z0-9]*\)' + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[BCDT]' + ;; +cygwin* | mingw* | pw32* | cegcc*) + symcode='[ABCDGISTW]' + ;; +hpux*) + if test ia64 = "$host_cpu"; then + symcode='[ABCDEGRST]' + fi + ;; +irix* | nonstopux*) + symcode='[BCDEGRST]' + ;; +osf*) + symcode='[BCDEGQRST]' + ;; +solaris*) + symcode='[BDRT]' + ;; +sco3.2v5*) + symcode='[DT]' + ;; +sysv4.2uw2*) + symcode='[DT]' + ;; +sysv5* | sco5v6* | unixware* | OpenUNIX*) + symcode='[ABDT]' + ;; +sysv4) + symcode='[DFNSTU]' + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[ABCDGIRSTW]' ;; +esac + +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Gets list of data symbols to import. + lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'" + # Adjust the below global symbol transforms to fixup imported variables. + lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'" + lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'" + lt_c_name_lib_hook="\ + -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\ + -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'" +else + # Disable hooks by default. + lt_cv_sys_global_symbol_to_import= + lt_cdecl_hook= + lt_c_name_hook= + lt_c_name_lib_hook= +fi + +# Transform an extracted symbol line into a proper C declaration. +# Some systems (esp. on ia64) link data and code symbols differently, +# so use this general approach. +lt_cv_sys_global_symbol_to_cdecl="sed -n"\ +$lt_cdecl_hook\ +" -e 's/^T .* \(.*\)$/extern int \1();/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n"\ +$lt_c_name_hook\ +" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'" + +# Transform an extracted symbol line into symbol name with lib prefix and +# symbol address. +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\ +$lt_c_name_lib_hook\ +" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ +" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'" + +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# Try without a prefix underscore, then with it. +for ac_symprfx in "" "_"; do + + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" + + # Write the raw and C identifiers. + if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Fake it for dumpbin and say T for any non-static function, + # D for any global variable and I for any imported variable. + # Also find C++ and __fastcall symbols from MSVC++, + # which start with @ or ?. + lt_cv_sys_global_symbol_pipe="$AWK '"\ +" {last_section=section; section=\$ 3};"\ +" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ +" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\ +" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\ +" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\ +" \$ 0!~/External *\|/{next};"\ +" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ +" {if(hide[section]) next};"\ +" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\ +" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\ +" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\ +" ' prfx=^$ac_symprfx" + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi + lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext <<_LT_EOF +#ifdef __cplusplus +extern "C" { +#endif +char nm_test_var; +void nm_test_func(void); +void nm_test_func(void){} +#ifdef __cplusplus +} +#endif +int main(){nm_test_var='a';nm_test_func();return(0);} +_LT_EOF + + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + # Now try to grab the symbols. + nlist=conftest.nm + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5 + (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE +/* DATA imports from DLLs on WIN32 can't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT_DLSYM_CONST +#elif defined __osf__ +/* This system does not cope well with relocations in const data. */ +# define LT_DLSYM_CONST +#else +# define LT_DLSYM_CONST const +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +_LT_EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' + + cat <<_LT_EOF >> conftest.$ac_ext + +/* The mapping between symbol names and symbols. */ +LT_DLSYM_CONST struct { + const char *name; + void *address; +} +lt__PROGRAM__LTX_preloaded_symbols[] = +{ + { "@PROGRAM@", (void *) 0 }, +_LT_EOF + $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + cat <<\_LT_EOF >> conftest.$ac_ext + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt__PROGRAM__LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif +_LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_globsym_save_LIBS=$LIBS + lt_globsym_save_CFLAGS=$CFLAGS + LIBS=conftstm.$ac_objext + CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest$ac_exeext; then + pipe_works=yes + fi + LIBS=$lt_globsym_save_LIBS + CFLAGS=$lt_globsym_save_CFLAGS + else + echo "cannot find nm_test_func in $nlist" >&5 + fi + else + echo "cannot find nm_test_var in $nlist" >&5 + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 + fi + else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + fi + rm -rf conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test yes = "$pipe_works"; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done + +fi + +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 +$as_echo "failed" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 +$as_echo "ok" >&6; } +fi + +# Response file support. +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + nm_file_list_spec='@' +elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then + nm_file_list_spec='@' +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 +$as_echo_n "checking for sysroot... " >&6; } + +# Check whether --with-sysroot was given. +if test "${with_sysroot+set}" = set; then : + withval=$with_sysroot; +else + with_sysroot=no +fi + + +lt_sysroot= +case $with_sysroot in #( + yes) + if test yes = "$GCC"; then + lt_sysroot=`$CC --print-sysroot 2>/dev/null` + fi + ;; #( + /*) + lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` + ;; #( + no|'') + ;; #( + *) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_sysroot" >&5 +$as_echo "$with_sysroot" >&6; } + as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 + ;; +esac + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 +$as_echo "${lt_sysroot:-no}" >&6; } + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a working dd" >&5 +$as_echo_n "checking for a working dd... " >&6; } +if ${ac_cv_path_lt_DD+:} false; then : + $as_echo_n "(cached) " >&6 +else + printf 0123456789abcdef0123456789abcdef >conftest.i +cat conftest.i conftest.i >conftest2.i +: ${lt_DD:=$DD} +if test -z "$lt_DD"; then + ac_path_lt_DD_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in dd; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_lt_DD="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_lt_DD" || continue +if "$ac_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then + cmp -s conftest.i conftest.out \ + && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=: +fi + $ac_path_lt_DD_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_lt_DD"; then + : + fi +else + ac_cv_path_lt_DD=$lt_DD +fi + +rm -f conftest.i conftest2.i conftest.out +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_lt_DD" >&5 +$as_echo "$ac_cv_path_lt_DD" >&6; } + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to truncate binary pipes" >&5 +$as_echo_n "checking how to truncate binary pipes... " >&6; } +if ${lt_cv_truncate_bin+:} false; then : + $as_echo_n "(cached) " >&6 +else + printf 0123456789abcdef0123456789abcdef >conftest.i +cat conftest.i conftest.i >conftest2.i +lt_cv_truncate_bin= +if "$ac_cv_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then + cmp -s conftest.i conftest.out \ + && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1" +fi +rm -f conftest.i conftest2.i conftest.out +test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q" +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_truncate_bin" >&5 +$as_echo "$lt_cv_truncate_bin" >&6; } + + + + + + + +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +func_cc_basename () +{ + for cc_temp in $*""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac + done + func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +} + +# Check whether --enable-libtool-lock was given. +if test "${enable_libtool_lock+set}" = set; then : + enableval=$enable_libtool_lock; +fi + +test no = "$enable_libtool_lock" || enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out what ABI is being produced by ac_compile, and set mode + # options accordingly. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE=32 + ;; + *ELF-64*) + HPUX_IA64_MODE=64 + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. + echo '#line '$LINENO' "configure"' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + if test yes = "$lt_cv_prog_gnu_ld"; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +mips64*-*linux*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. + echo '#line '$LINENO' "configure"' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + emul=elf + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + emul="${emul}32" + ;; + *64-bit*) + emul="${emul}64" + ;; + esac + case `/usr/bin/file conftest.$ac_objext` in + *MSB*) + emul="${emul}btsmip" + ;; + *LSB*) + emul="${emul}ltsmip" + ;; + esac + case `/usr/bin/file conftest.$ac_objext` in + *N32*) + emul="${emul}n32" + ;; + esac + LD="${LD-ld} -m $emul" + fi + rm -rf conftest* + ;; + +x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \ +s390*-*linux*|s390*-*tpf*|sparc*-*linux*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. Note that the listed cases only cover the + # situations where additional linker options are needed (such as when + # doing 32-bit compilation for a host where ld defaults to 64-bit, or + # vice versa); the common cases where no linker options are needed do + # not appear in the list. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_i386_fbsd" + ;; + x86_64-*linux*) + case `/usr/bin/file conftest.o` in + *x86-64*) + LD="${LD-ld} -m elf32_x86_64" + ;; + *) + LD="${LD-ld} -m elf_i386" + ;; + esac + ;; + powerpc64le-*linux*) + LD="${LD-ld} -m elf32lppclinux" + ;; + powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_x86_64_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + powerpcle-*linux*) + LD="${LD-ld} -m elf64lppc" + ;; + powerpc-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*|s390*-*tpf*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS=$CFLAGS + CFLAGS="$CFLAGS -belf" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 +$as_echo_n "checking whether the C compiler needs -belf... " >&6; } +if ${lt_cv_cc_needs_belf+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_cc_needs_belf=yes +else + lt_cv_cc_needs_belf=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 +$as_echo "$lt_cv_cc_needs_belf" >&6; } + if test yes != "$lt_cv_cc_needs_belf"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS=$SAVE_CFLAGS + fi + ;; +*-*solaris*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) + case $host in + i?86-*-solaris*|x86_64-*-solaris*) + LD="${LD-ld} -m elf_x86_64" + ;; + sparc*-*-solaris*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + # GNU ld 2.21 introduced _sol2 emulations. Use them if available. + if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then + LD=${LD-ld}_sol2 + fi + ;; + *) + if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then + LD="${LD-ld} -64" + fi + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; +esac + +need_locks=$enable_libtool_lock + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. +set dummy ${ac_tool_prefix}mt; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_MANIFEST_TOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$MANIFEST_TOOL"; then + ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL +if test -n "$MANIFEST_TOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 +$as_echo "$MANIFEST_TOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_MANIFEST_TOOL"; then + ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL + # Extract the first word of "mt", so it can be a program name with args. +set dummy mt; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_MANIFEST_TOOL"; then + ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL +if test -n "$ac_ct_MANIFEST_TOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 +$as_echo "$ac_ct_MANIFEST_TOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_MANIFEST_TOOL" = x; then + MANIFEST_TOOL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL + fi +else + MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" +fi + +test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 +$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } +if ${lt_cv_path_mainfest_tool+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_path_mainfest_tool=no + echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 + $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out + cat conftest.err >&5 + if $GREP 'Manifest Tool' conftest.out > /dev/null; then + lt_cv_path_mainfest_tool=yes + fi + rm -f conftest* +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 +$as_echo "$lt_cv_path_mainfest_tool" >&6; } +if test yes != "$lt_cv_path_mainfest_tool"; then + MANIFEST_TOOL=: +fi + + + + + + + case $host_os in + rhapsody* | darwin*) + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. +set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DSYMUTIL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DSYMUTIL"; then + ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DSYMUTIL=$ac_cv_prog_DSYMUTIL +if test -n "$DSYMUTIL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 +$as_echo "$DSYMUTIL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_DSYMUTIL"; then + ac_ct_DSYMUTIL=$DSYMUTIL + # Extract the first word of "dsymutil", so it can be a program name with args. +set dummy dsymutil; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DSYMUTIL"; then + ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL +if test -n "$ac_ct_DSYMUTIL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 +$as_echo "$ac_ct_DSYMUTIL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_DSYMUTIL" = x; then + DSYMUTIL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DSYMUTIL=$ac_ct_DSYMUTIL + fi +else + DSYMUTIL="$ac_cv_prog_DSYMUTIL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. +set dummy ${ac_tool_prefix}nmedit; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_NMEDIT+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$NMEDIT"; then + ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +NMEDIT=$ac_cv_prog_NMEDIT +if test -n "$NMEDIT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 +$as_echo "$NMEDIT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_NMEDIT"; then + ac_ct_NMEDIT=$NMEDIT + # Extract the first word of "nmedit", so it can be a program name with args. +set dummy nmedit; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_NMEDIT"; then + ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_NMEDIT="nmedit" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT +if test -n "$ac_ct_NMEDIT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 +$as_echo "$ac_ct_NMEDIT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_NMEDIT" = x; then + NMEDIT=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + NMEDIT=$ac_ct_NMEDIT + fi +else + NMEDIT="$ac_cv_prog_NMEDIT" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. +set dummy ${ac_tool_prefix}lipo; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_LIPO+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$LIPO"; then + ac_cv_prog_LIPO="$LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_LIPO="${ac_tool_prefix}lipo" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +LIPO=$ac_cv_prog_LIPO +if test -n "$LIPO"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 +$as_echo "$LIPO" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_LIPO"; then + ac_ct_LIPO=$LIPO + # Extract the first word of "lipo", so it can be a program name with args. +set dummy lipo; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_LIPO+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_LIPO"; then + ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_LIPO="lipo" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO +if test -n "$ac_ct_LIPO"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 +$as_echo "$ac_ct_LIPO" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_LIPO" = x; then + LIPO=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + LIPO=$ac_ct_LIPO + fi +else + LIPO="$ac_cv_prog_LIPO" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OTOOL"; then + ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OTOOL="${ac_tool_prefix}otool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OTOOL=$ac_cv_prog_OTOOL +if test -n "$OTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 +$as_echo "$OTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OTOOL"; then + ac_ct_OTOOL=$OTOOL + # Extract the first word of "otool", so it can be a program name with args. +set dummy otool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OTOOL"; then + ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OTOOL="otool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL +if test -n "$ac_ct_OTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 +$as_echo "$ac_ct_OTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OTOOL" = x; then + OTOOL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL=$ac_ct_OTOOL + fi +else + OTOOL="$ac_cv_prog_OTOOL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool64; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OTOOL64+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OTOOL64"; then + ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OTOOL64=$ac_cv_prog_OTOOL64 +if test -n "$OTOOL64"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 +$as_echo "$OTOOL64" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OTOOL64"; then + ac_ct_OTOOL64=$OTOOL64 + # Extract the first word of "otool64", so it can be a program name with args. +set dummy otool64; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OTOOL64"; then + ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OTOOL64="otool64" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 +if test -n "$ac_ct_OTOOL64"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 +$as_echo "$ac_ct_OTOOL64" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OTOOL64" = x; then + OTOOL64=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL64=$ac_ct_OTOOL64 + fi +else + OTOOL64="$ac_cv_prog_OTOOL64" +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 +$as_echo_n "checking for -single_module linker flag... " >&6; } +if ${lt_cv_apple_cc_single_mod+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_apple_cc_single_mod=no + if test -z "$LT_MULTI_MODULE"; then + # By default we will add the -single_module flag. You can override + # by either setting the environment variable LT_MULTI_MODULE + # non-empty at configure time, or by adding -multi_module to the + # link flags. + rm -rf libconftest.dylib* + echo "int foo(void){return 1;}" > conftest.c + echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +-dynamiclib -Wl,-single_module conftest.c" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ + -dynamiclib -Wl,-single_module conftest.c 2>conftest.err + _lt_result=$? + # If there is a non-empty error log, and "single_module" + # appears in it, assume the flag caused a linker warning + if test -s conftest.err && $GREP single_module conftest.err; then + cat conftest.err >&5 + # Otherwise, if the output was created with a 0 exit code from + # the compiler, it worked. + elif test -f libconftest.dylib && test 0 = "$_lt_result"; then + lt_cv_apple_cc_single_mod=yes + else + cat conftest.err >&5 + fi + rm -rf libconftest.dylib* + rm -f conftest.* + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 +$as_echo "$lt_cv_apple_cc_single_mod" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 +$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } +if ${lt_cv_ld_exported_symbols_list+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_ld_exported_symbols_list=yes +else + lt_cv_ld_exported_symbols_list=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 +$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 +$as_echo_n "checking for -force_load linker flag... " >&6; } +if ${lt_cv_ld_force_load+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_force_load=no + cat > conftest.c << _LT_EOF +int forced_loaded() { return 2;} +_LT_EOF + echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 + echo "$AR cru libconftest.a conftest.o" >&5 + $AR cru libconftest.a conftest.o 2>&5 + echo "$RANLIB libconftest.a" >&5 + $RANLIB libconftest.a 2>&5 + cat > conftest.c << _LT_EOF +int main() { return 0;} +_LT_EOF + echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err + _lt_result=$? + if test -s conftest.err && $GREP force_load conftest.err; then + cat conftest.err >&5 + elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then + lt_cv_ld_force_load=yes + else + cat conftest.err >&5 + fi + rm -f conftest.err libconftest.a conftest conftest.c + rm -rf conftest.dSYM + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 +$as_echo "$lt_cv_ld_force_load" >&6; } + case $host_os in + rhapsody* | darwin1.[012]) + _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;; + darwin1.*) + _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; + darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*86*-darwin8*|10.0,*-darwin[91]*) + _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; + 10.[012][,.]*) + _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; + 10.*) + _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; + esac + ;; + esac + if test yes = "$lt_cv_apple_cc_single_mod"; then + _lt_dar_single_mod='$single_module' + fi + if test yes = "$lt_cv_ld_exported_symbols_list"; then + _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym' + else + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib' + fi + if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then + _lt_dsymutil='~$DSYMUTIL $lib || :' + else + _lt_dsymutil= + fi + ;; + esac + +# func_munge_path_list VARIABLE PATH +# ----------------------------------- +# VARIABLE is name of variable containing _space_ separated list of +# directories to be munged by the contents of PATH, which is string +# having a format: +# "DIR[:DIR]:" +# string "DIR[ DIR]" will be prepended to VARIABLE +# ":DIR[:DIR]" +# string "DIR[ DIR]" will be appended to VARIABLE +# "DIRP[:DIRP]::[DIRA:]DIRA" +# string "DIRP[ DIRP]" will be prepended to VARIABLE and string +# "DIRA[ DIRA]" will be appended to VARIABLE +# "DIR[:DIR]" +# VARIABLE will be replaced by "DIR[ DIR]" +func_munge_path_list () +{ + case x$2 in + x) + ;; + *:) + eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\" + ;; + x:*) + eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\" + ;; + *::*) + eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" + eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\" + ;; + *) + eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\" + ;; + esac +} + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if ${ac_cv_header_stdc+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include +#include + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_stdc=yes +else + ac_cv_header_stdc=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then : + : +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + +else + ac_cv_header_stdc=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then + +$as_echo "#define STDC_HEADERS 1" >>confdefs.h + +fi + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default +" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + +for ac_header in dlfcn.h +do : + ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default +" +if test "x$ac_cv_header_dlfcn_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_DLFCN_H 1 +_ACEOF + +fi + +done + + + + + +# Set options +enable_win32_dll=yes + +case $host in +*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. +set dummy ${ac_tool_prefix}as; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AS+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AS"; then + ac_cv_prog_AS="$AS" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AS="${ac_tool_prefix}as" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AS=$ac_cv_prog_AS +if test -n "$AS"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5 +$as_echo "$AS" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_AS"; then + ac_ct_AS=$AS + # Extract the first word of "as", so it can be a program name with args. +set dummy as; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_AS+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_AS"; then + ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_AS="as" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_AS=$ac_cv_prog_ac_ct_AS +if test -n "$ac_ct_AS"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5 +$as_echo "$ac_ct_AS" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_AS" = x; then + AS="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AS=$ac_ct_AS + fi +else + AS="$ac_cv_prog_AS" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. +set dummy ${ac_tool_prefix}dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DLLTOOL"; then + ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DLLTOOL=$ac_cv_prog_DLLTOOL +if test -n "$DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 +$as_echo "$DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_DLLTOOL"; then + ac_ct_DLLTOOL=$DLLTOOL + # Extract the first word of "dlltool", so it can be a program name with args. +set dummy dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DLLTOOL"; then + ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DLLTOOL="dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL +if test -n "$ac_ct_DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 +$as_echo "$ac_ct_DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_DLLTOOL" = x; then + DLLTOOL="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DLLTOOL=$ac_ct_DLLTOOL + fi +else + DLLTOOL="$ac_cv_prog_DLLTOOL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. +set dummy ${ac_tool_prefix}objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OBJDUMP"; then + ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OBJDUMP=$ac_cv_prog_OBJDUMP +if test -n "$OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 +$as_echo "$OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OBJDUMP"; then + ac_ct_OBJDUMP=$OBJDUMP + # Extract the first word of "objdump", so it can be a program name with args. +set dummy objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OBJDUMP"; then + ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OBJDUMP="objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP +if test -n "$ac_ct_OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 +$as_echo "$ac_ct_OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OBJDUMP" = x; then + OBJDUMP="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OBJDUMP=$ac_ct_OBJDUMP + fi +else + OBJDUMP="$ac_cv_prog_OBJDUMP" +fi + + ;; +esac + +test -z "$AS" && AS=as + + + + + +test -z "$DLLTOOL" && DLLTOOL=dlltool + + + + + +test -z "$OBJDUMP" && OBJDUMP=objdump + + + + + + + + enable_dlopen=no + + + + # Check whether --enable-shared was given. +if test "${enable_shared+set}" = set; then : + enableval=$enable_shared; p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for pkg in $enableval; do + IFS=$lt_save_ifs + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS=$lt_save_ifs + ;; + esac +else + enable_shared=yes +fi + + + + + + + + + + # Check whether --enable-static was given. +if test "${enable_static+set}" = set; then : + enableval=$enable_static; p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for pkg in $enableval; do + IFS=$lt_save_ifs + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS=$lt_save_ifs + ;; + esac +else + enable_static=yes +fi + + + + + + + + + + +# Check whether --with-pic was given. +if test "${with_pic+set}" = set; then : + withval=$with_pic; lt_p=${PACKAGE-default} + case $withval in + yes|no) pic_mode=$withval ;; + *) + pic_mode=default + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for lt_pkg in $withval; do + IFS=$lt_save_ifs + if test "X$lt_pkg" = "X$lt_p"; then + pic_mode=yes + fi + done + IFS=$lt_save_ifs + ;; + esac +else + pic_mode=default +fi + + + + + + + + + # Check whether --enable-fast-install was given. +if test "${enable_fast_install+set}" = set; then : + enableval=$enable_fast_install; p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for pkg in $enableval; do + IFS=$lt_save_ifs + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS=$lt_save_ifs + ;; + esac +else + enable_fast_install=yes +fi + + + + + + + + + shared_archive_member_spec= +case $host,$enable_shared in +power*-*-aix[5-9]*,yes) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking which variant of shared library versioning to provide" >&5 +$as_echo_n "checking which variant of shared library versioning to provide... " >&6; } + +# Check whether --with-aix-soname was given. +if test "${with_aix_soname+set}" = set; then : + withval=$with_aix_soname; case $withval in + aix|svr4|both) + ;; + *) + as_fn_error $? "Unknown argument to --with-aix-soname" "$LINENO" 5 + ;; + esac + lt_cv_with_aix_soname=$with_aix_soname +else + if ${lt_cv_with_aix_soname+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_with_aix_soname=aix +fi + + with_aix_soname=$lt_cv_with_aix_soname +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_aix_soname" >&5 +$as_echo "$with_aix_soname" >&6; } + if test aix != "$with_aix_soname"; then + # For the AIX way of multilib, we name the shared archive member + # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o', + # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File. + # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag, + # the AIX toolchain works better with OBJECT_MODE set (default 32). + if test 64 = "${OBJECT_MODE-32}"; then + shared_archive_member_spec=shr_64 + else + shared_archive_member_spec=shr + fi + fi + ;; +*) + with_aix_soname=aix + ;; +esac + + + + + + + + + + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS=$ltmain + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +test -z "$LN_S" && LN_S="ln -s" + + + + + + + + + + + + + + +if test -n "${ZSH_VERSION+set}"; then + setopt NO_GLOB_SUBST +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 +$as_echo_n "checking for objdir... " >&6; } +if ${lt_cv_objdir+:} false; then : + $as_echo_n "(cached) " >&6 +else + rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 +$as_echo "$lt_cv_objdir" >&6; } +objdir=$lt_cv_objdir + + + + + +cat >>confdefs.h <<_ACEOF +#define LT_OBJDIR "$lt_cv_objdir/" +_ACEOF + + + + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test set != "${COLLECT_NAMES+set}"; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Global variables: +ofile=libtool +can_build_shared=yes + +# All known linkers require a '.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a + +with_gnu_ld=$lt_cv_prog_gnu_ld + +old_CC=$CC +old_CFLAGS=$CFLAGS + +# Set sane defaults for various variables +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +test -z "$LD" && LD=ld +test -z "$ac_objext" && ac_objext=o + +func_cc_basename $compiler +cc_basename=$func_cc_basename_result + + +# Only perform the check for file, if the check method requires it +test -z "$MAGIC_CMD" && MAGIC_CMD=file +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 +$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } +if ${lt_cv_path_MAGIC_CMD+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD=$MAGIC_CMD + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS=$lt_save_ifs + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/${ac_tool_prefix}file"; then + lt_cv_path_MAGIC_CMD=$ac_dir/"${ac_tool_prefix}file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD=$lt_cv_path_MAGIC_CMD + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS=$lt_save_ifs + MAGIC_CMD=$lt_save_MAGIC_CMD + ;; +esac +fi + +MAGIC_CMD=$lt_cv_path_MAGIC_CMD +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + + + +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 +$as_echo_n "checking for file... " >&6; } +if ${lt_cv_path_MAGIC_CMD+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD=$MAGIC_CMD + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS=$lt_save_ifs + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/file"; then + lt_cv_path_MAGIC_CMD=$ac_dir/"file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD=$lt_cv_path_MAGIC_CMD + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS=$lt_save_ifs + MAGIC_CMD=$lt_save_MAGIC_CMD + ;; +esac +fi + +MAGIC_CMD=$lt_cv_path_MAGIC_CMD +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + else + MAGIC_CMD=: + fi +fi + + fi + ;; +esac + +# Use C for the default configuration in the libtool script + +lt_save_CC=$CC +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +objext=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}' + + + + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + +# Save the default compiler, since it gets overwritten when the other +# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. +compiler_DEFAULT=$CC + +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* + +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* + + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +if test -n "$compiler"; then + +lt_prog_compiler_no_builtin_flag= + +if test yes = "$GCC"; then + case $cc_basename in + nvcc*) + lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; + *) + lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; + esac + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } +if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_rtti_exceptions=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="-fno-rtti -fno-exceptions" ## exclude from sc_useless_quotes_in_assignment + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_rtti_exceptions=yes + fi + fi + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } + +if test yes = "$lt_cv_prog_compiler_rtti_exceptions"; then + lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" +else + : +fi + +fi + + + + + + + lt_prog_compiler_wl= +lt_prog_compiler_pic= +lt_prog_compiler_static= + + + if test yes = "$GCC"; then + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_static='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test ia64 = "$host_cpu"; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + fi + lt_prog_compiler_pic='-fPIC' + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + lt_prog_compiler_pic='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the '-m68020' flag to GCC prevents building anything better, + # like '-m68040'. + lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + lt_prog_compiler_pic='-DDLL_EXPORT' + case $host_os in + os2*) + lt_prog_compiler_static='$wl-static' + ;; + esac + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic='-fno-common' + ;; + + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + lt_prog_compiler_static= + ;; + + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + ;; + + interix[3-9]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + lt_prog_compiler_can_build_shared=no + enable_shared=no + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic=-Kconform_pic + fi + ;; + + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + + case $cc_basename in + nvcc*) # Cuda Compiler Driver 2.2 + lt_prog_compiler_wl='-Xlinker ' + if test -n "$lt_prog_compiler_pic"; then + lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic" + fi + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + lt_prog_compiler_wl='-Wl,' + if test ia64 = "$host_cpu"; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + else + lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic='-fno-common' + case $cc_basename in + nagfor*) + # NAG Fortran compiler + lt_prog_compiler_wl='-Wl,-Wl,,' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + esac + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic='-DDLL_EXPORT' + case $host_os in + os2*) + lt_prog_compiler_static='$wl-static' + ;; + esac + ;; + + hpux9* | hpux10* | hpux11*) + lt_prog_compiler_wl='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + lt_prog_compiler_static='$wl-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + lt_prog_compiler_wl='-Wl,' + # PIC (with -KPIC) is the default. + lt_prog_compiler_static='-non_shared' + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) + case $cc_basename in + # old Intel for x86_64, which still supported -KPIC. + ecc*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-static' + ;; + # icc used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + icc* | ifort*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + # Lahey Fortran 8.1. + lf95*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='--shared' + lt_prog_compiler_static='--static' + ;; + nagfor*) + # NAG Fortran compiler + lt_prog_compiler_wl='-Wl,-Wl,,' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + tcc*) + # Fabrice Bellard et al's Tiny C Compiler + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; + ccc*) + lt_prog_compiler_wl='-Wl,' + # All Alpha code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + xl* | bgxl* | bgf* | mpixl*) + # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-qpic' + lt_prog_compiler_static='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='' + ;; + *Sun\ F* | *Sun*Fortran*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='-Qoption ld ' + ;; + *Sun\ C*) + # Sun C 5.9 + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='-Wl,' + ;; + *Intel*\ [CF]*Compiler*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + *Portland\ Group*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; + esac + ;; + esac + ;; + + newsos6) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; + + osf3* | osf4* | osf5*) + lt_prog_compiler_wl='-Wl,' + # All OSF/1 code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + + rdos*) + lt_prog_compiler_static='-non_shared' + ;; + + solaris*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + case $cc_basename in + f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + lt_prog_compiler_wl='-Qoption ld ';; + *) + lt_prog_compiler_wl='-Wl,';; + esac + ;; + + sunos4*) + lt_prog_compiler_wl='-Qoption ld ' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic='-Kconform_pic' + lt_prog_compiler_static='-Bstatic' + fi + ;; + + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + unicos*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_can_build_shared=no + ;; + + uts4*) + lt_prog_compiler_pic='-pic' + lt_prog_compiler_static='-Bstatic' + ;; + + *) + lt_prog_compiler_can_build_shared=no + ;; + esac + fi + +case $host_os in + # For platforms that do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic= + ;; + *) + lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" + ;; +esac + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 +$as_echo_n "checking for $compiler option to produce PIC... " >&6; } +if ${lt_cv_prog_compiler_pic+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic=$lt_prog_compiler_pic +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 +$as_echo "$lt_cv_prog_compiler_pic" >&6; } +lt_prog_compiler_pic=$lt_cv_prog_compiler_pic + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 +$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } +if ${lt_cv_prog_compiler_pic_works+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic_works=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic -DPIC" ## exclude from sc_useless_quotes_in_assignment + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_pic_works=yes + fi + fi + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 +$as_echo "$lt_cv_prog_compiler_pic_works" >&6; } + +if test yes = "$lt_cv_prog_compiler_pic_works"; then + case $lt_prog_compiler_pic in + "" | " "*) ;; + *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; + esac +else + lt_prog_compiler_pic= + lt_prog_compiler_can_build_shared=no +fi + +fi + + + + + + + + + + + +# +# Check to make sure the static flag actually works. +# +wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } +if ${lt_cv_prog_compiler_static_works+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_static_works=no + save_LDFLAGS=$LDFLAGS + LDFLAGS="$LDFLAGS $lt_tmp_static_flag" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_static_works=yes + fi + else + lt_cv_prog_compiler_static_works=yes + fi + fi + $RM -r conftest* + LDFLAGS=$save_LDFLAGS + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 +$as_echo "$lt_cv_prog_compiler_static_works" >&6; } + +if test yes = "$lt_cv_prog_compiler_static_works"; then + : +else + lt_prog_compiler_static= +fi + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if ${lt_cv_prog_compiler_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if ${lt_cv_prog_compiler_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } + + + + +hard_links=nottested +if test no = "$lt_cv_prog_compiler_c_o" && test no != "$need_locks"; then + # do not overwrite the value of need_locks provided by the user + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 +$as_echo_n "checking if we can lock with hard links... " >&6; } + hard_links=yes + $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 +$as_echo "$hard_links" >&6; } + if test no = "$hard_links"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5 +$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } + + runpath_var= + allow_undefined_flag= + always_export_symbols=no + archive_cmds= + archive_expsym_cmds= + compiler_needs_object=no + enable_shared_with_static_runtimes=no + export_dynamic_flag_spec= + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + hardcode_automatic=no + hardcode_direct=no + hardcode_direct_absolute=no + hardcode_libdir_flag_spec= + hardcode_libdir_separator= + hardcode_minus_L=no + hardcode_shlibpath_var=unsupported + inherit_rpath=no + link_all_deplibs=unknown + module_cmds= + module_expsym_cmds= + old_archive_from_new_cmds= + old_archive_from_expsyms_cmds= + thread_safe_flag_spec= + whole_archive_flag_spec= + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + include_expsyms= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ' (' and ')$', so one must not match beginning or + # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc', + # as well as any symbol that contains 'd'. + exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + # Exclude shared library initialization/finalization symbols. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test yes != "$GCC"; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd* | bitrig*) + with_gnu_ld=no + ;; + esac + + ld_shlibs=yes + + # On some targets, GNU ld is compatible enough with the native linker + # that we're better off using the native interface for both. + lt_use_gnu_ld_interface=no + if test yes = "$with_gnu_ld"; then + case $host_os in + aix*) + # The AIX port of GNU ld has always aspired to compatibility + # with the native linker. However, as the warning in the GNU ld + # block says, versions before 2.19.5* couldn't really create working + # shared libraries, regardless of the interface used. + case `$LD -v 2>&1` in + *\ \(GNU\ Binutils\)\ 2.19.5*) ;; + *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; + *\ \(GNU\ Binutils\)\ [3-9]*) ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + fi + + if test yes = "$lt_use_gnu_ld_interface"; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='$wl' + + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + export_dynamic_flag_spec='$wl--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' + else + whole_archive_flag_spec= + fi + supports_anon_versioning=no + case `$LD -v | $SED -e 's/(^)\+)\s\+//' 2>&1` in + *GNU\ gold*) supports_anon_versioning=yes ;; + *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + + # See if GNU ld supports shared libraries. + case $host_os in + aix[3-9]*) + # On AIX/PPC, the GNU linker is very broken + if test ia64 != "$host_cpu"; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: the GNU linker, at least up to release 2.19, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to install binutils +*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. +*** You will then need to restart the configuration process. + +_LT_EOF + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + else + ld_shlibs=no + fi + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + export_dynamic_flag_spec='$wl--export-all-symbols' + allow_undefined_flag=unsupported + always_export_symbols=no + enable_shared_with_static_runtimes=yes + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' + exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file, use it as + # is; otherwise, prepend EXPORTS... + archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + ld_shlibs=no + fi + ;; + + haiku*) + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + link_all_deplibs=yes + ;; + + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + shrext_cmds=.dll + archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + enable_shared_with_static_runtimes=yes + ;; + + interix[3-9]*) + hardcode_direct=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='$wl-rpath,$libdir' + export_dynamic_flag_spec='$wl-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + tmp_diet=no + if test linux-dietlibc = "$host_os"; then + case $cc_basename in + diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) + esac + fi + if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ + && test no = "$tmp_diet" + then + tmp_addflag=' $pic_flag' + tmp_sharedflag='-shared' + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group f77 and f90 compilers + whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + lf95*) # Lahey Fortran 8.1 + whole_archive_flag_spec= + tmp_sharedflag='--shared' ;; + nagfor*) # NAGFOR 5.3 + tmp_sharedflag='-Wl,-shared' ;; + xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) + tmp_sharedflag='-qmkshrobj' + tmp_addflag= ;; + nvcc*) # Cuda Compiler Driver 2.2 + whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + compiler_needs_object=yes + ;; + esac + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C 5.9 + whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + compiler_needs_object=yes + tmp_sharedflag='-G' ;; + *Sun\ F*) # Sun Fortran 8.3 + tmp_sharedflag='-G' ;; + esac + archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + + if test yes = "$supports_anon_versioning"; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' + fi + + case $cc_basename in + tcc*) + export_dynamic_flag_spec='-rdynamic' + ;; + xlf* | bgf* | bgxlf* | mpixlf*) + # IBM XL Fortran 10.1 on PPC cannot create shared libs itself + whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + if test yes = "$supports_anon_versioning"; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac + else + ld_shlibs=no + fi + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris*) + if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + ;; + + sunos4*) + archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + + if test no = "$ld_shlibs"; then + runpath_var= + hardcode_libdir_flag_spec= + export_dynamic_flag_spec= + whole_archive_flag_spec= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag=unsupported + always_export_symbols=yes + archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + + aix[4-9]*) + if test ia64 = "$host_cpu"; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag= + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to GNU nm, but means don't demangle to AIX nm. + # Without the "-l" option, or with the "-B" option, AIX nm treats + # weak defined symbols like other global defined symbols, whereas + # GNU nm marks them as "W". + # While the 'weak' keyword is ignored in the Export File, we need + # it in the Import File for the 'aix-soname' feature, so we have + # to replace the "-B" option with "-P" for AIX nm. + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # have runtime linking enabled, and use it for executables. + # For shared libraries, we enable/disable runtime linking + # depending on the kind of the shared library created - + # when "with_aix_soname,aix_use_runtimelinking" is: + # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables + # "aix,yes" lib.so shared, rtl:yes, for executables + # lib.a static archive + # "both,no" lib.so.V(shr.o) shared, rtl:yes + # lib.a(lib.so.V) shared, rtl:no, for executables + # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a(lib.so.V) shared, rtl:no + # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a static archive + case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then + aix_use_runtimelinking=yes + break + fi + done + if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then + # With aix-soname=svr4, we create the lib.so.V shared archives only, + # so we don't have lib.a shared libs to link our executables. + # We have to force runtime linking in this case. + aix_use_runtimelinking=yes + LDFLAGS="$LDFLAGS -Wl,-brtl" + fi + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + archive_cmds='' + hardcode_direct=yes + hardcode_direct_absolute=yes + hardcode_libdir_separator=':' + link_all_deplibs=yes + file_list_spec='$wl-f,' + case $with_aix_soname,$aix_use_runtimelinking in + aix,*) ;; # traditional, no import file + svr4,* | *,yes) # use import file + # The Import File defines what to hardcode. + hardcode_direct=no + hardcode_direct_absolute=no + ;; + esac + + if test yes = "$GCC"; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`$CC -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + hardcode_direct=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + ;; + esac + shared_flag='-shared' + if test yes = "$aix_use_runtimelinking"; then + shared_flag="$shared_flag "'$wl-G' + fi + # Need to ensure runtime linking is disabled for the traditional + # shared library, or the linker may eventually find shared libraries + # /with/ Import File - we do not want to mix them. + shared_flag_aix='-shared' + shared_flag_svr4='-shared $wl-G' + else + # not using gcc + if test ia64 = "$host_cpu"; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test yes = "$aix_use_runtimelinking"; then + shared_flag='$wl-G' + else + shared_flag='$wl-bM:SRE' + fi + shared_flag_aix='$wl-bM:SRE' + shared_flag_svr4='$wl-G' + fi + fi + + export_dynamic_flag_spec='$wl-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols=yes + if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. + if test set = "${lt_cv_aix_libpath+set}"; then + aix_libpath=$lt_cv_aix_libpath +else + if ${lt_cv_aix_libpath_+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }' + lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=/usr/lib:/lib + fi + +fi + + aix_libpath=$lt_cv_aix_libpath_ +fi + + hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag + else + if test ia64 = "$host_cpu"; then + hardcode_libdir_flag_spec='$wl-R $libdir:/usr/lib:/lib' + allow_undefined_flag="-z nodefs" + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + if test set = "${lt_cv_aix_libpath+set}"; then + aix_libpath=$lt_cv_aix_libpath +else + if ${lt_cv_aix_libpath_+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }' + lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=/usr/lib:/lib + fi + +fi + + aix_libpath=$lt_cv_aix_libpath_ +fi + + hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag=' $wl-bernotok' + allow_undefined_flag=' $wl-berok' + if test yes = "$with_gnu_ld"; then + # We only use this code for GNU lds that support --whole-archive. + whole_archive_flag_spec='$wl--whole-archive$convenience $wl--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec='$convenience' + fi + archive_cmds_need_lc=yes + archive_expsym_cmds='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' + # -brtl affects multiple linker settings, -berok does not and is overridden later + compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`' + if test svr4 != "$with_aix_soname"; then + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' + fi + if test aix != "$with_aix_soname"; then + archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' + else + # used by -dlpreopen to get the symbols + archive_expsym_cmds="$archive_expsym_cmds"'~$MV $output_objdir/$realname.d/$soname $output_objdir' + fi + archive_expsym_cmds="$archive_expsym_cmds"'~$RM -r $output_objdir/$realname.d' + fi + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + + bsdi[45]*) + export_dynamic_flag_spec=-rdynamic + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + case $cc_basename in + cl*) + # Native MSVC + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + always_export_symbols=yes + file_list_spec='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=.dll + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' + archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then + cp "$export_symbols" "$output_objdir/$soname.def"; + echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; + else + $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, )='true' + enable_shared_with_static_runtimes=yes + exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' + # Don't use ranlib + old_postinstall_cmds='chmod 644 $oldlib' + postlink_cmds='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile=$lt_outputfile.exe + lt_tool_outputfile=$lt_tool_outputfile.exe + ;; + esac~ + if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # Assume MSVC wrapper + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=.dll + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_from_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' + enable_shared_with_static_runtimes=yes + ;; + esac + ;; + + darwin* | rhapsody*) + + + archive_cmds_need_lc=no + hardcode_direct=no + hardcode_automatic=yes + hardcode_shlibpath_var=unsupported + if test yes = "$lt_cv_ld_force_load"; then + whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + + else + whole_archive_flag_spec='' + fi + link_all_deplibs=yes + allow_undefined_flag=$_lt_dar_allow_undefined + case $cc_basename in + ifort*|nagfor*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; + esac + if test yes = "$_lt_dar_can_shared"; then + output_verbose_link_cmd=func_echo_all + archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil" + module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil" + archive_expsym_cmds="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil" + module_expsym_cmds="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil" + + else + ld_shlibs=no + fi + + ;; + + dgux*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2.*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + hpux9*) + if test yes = "$GCC"; then + archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' + else + archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' + fi + hardcode_libdir_flag_spec='$wl+b $wl$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + export_dynamic_flag_spec='$wl-E' + ;; + + hpux10*) + if test yes,no = "$GCC,$with_gnu_ld"; then + archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test no = "$with_gnu_ld"; then + hardcode_libdir_flag_spec='$wl+b $wl$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='$wl-E' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + fi + ;; + + hpux11*) + if test yes,no = "$GCC,$with_gnu_ld"; then + case $host_cpu in + hppa*64*) + archive_cmds='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + archive_cmds='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + + # Older versions of the 11.00 compiler do not understand -b yet + # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5 +$as_echo_n "checking if $CC understands -b... " >&6; } +if ${lt_cv_prog_compiler__b+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler__b=no + save_LDFLAGS=$LDFLAGS + LDFLAGS="$LDFLAGS -b" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler__b=yes + fi + else + lt_cv_prog_compiler__b=yes + fi + fi + $RM -r conftest* + LDFLAGS=$save_LDFLAGS + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 +$as_echo "$lt_cv_prog_compiler__b" >&6; } + +if test yes = "$lt_cv_prog_compiler__b"; then + archive_cmds='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' +fi + + ;; + esac + fi + if test no = "$with_gnu_ld"; then + hardcode_libdir_flag_spec='$wl+b $wl$libdir' + hardcode_libdir_separator=: + + case $host_cpu in + hppa*64*|ia64*) + hardcode_direct=no + hardcode_shlibpath_var=no + ;; + *) + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='$wl-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test yes = "$GCC"; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. + # This should be the same for all languages, so no per-tag cache variable. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 +$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } +if ${lt_cv_irix_exported_symbol+:} false; then : + $as_echo_n "(cached) " >&6 +else + save_LDFLAGS=$LDFLAGS + LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int foo (void) { return 0; } +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_irix_exported_symbol=yes +else + lt_cv_irix_exported_symbol=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 +$as_echo "$lt_cv_irix_exported_symbol" >&6; } + if test yes = "$lt_cv_irix_exported_symbol"; then + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib' + fi + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib' + fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + hardcode_libdir_separator=: + inherit_rpath=yes + link_all_deplibs=yes + ;; + + linux*) + case $cc_basename in + tcc*) + # Fabrice Bellard et al's Tiny C Compiler + ld_shlibs=yes + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + newsos6) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + hardcode_libdir_separator=: + hardcode_shlibpath_var=no + ;; + + *nto* | *qnx*) + ;; + + openbsd* | bitrig*) + if test -f /usr/libexec/ld.so; then + hardcode_direct=yes + hardcode_shlibpath_var=no + hardcode_direct_absolute=yes + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols' + hardcode_libdir_flag_spec='$wl-rpath,$libdir' + export_dynamic_flag_spec='$wl-E' + else + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='$wl-rpath,$libdir' + fi + else + ld_shlibs=no + fi + ;; + + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + shrext_cmds=.dll + archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + enable_shared_with_static_runtimes=yes + ;; + + osf3*) + if test yes = "$GCC"; then + allow_undefined_flag=' $wl-expect_unresolved $wl\*' + archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + hardcode_libdir_separator=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test yes = "$GCC"; then + allow_undefined_flag=' $wl-expect_unresolved $wl\*' + archive_cmds='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp' + + # Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + archive_cmds_need_lc='no' + hardcode_libdir_separator=: + ;; + + solaris*) + no_undefined_flag=' -z defs' + if test yes = "$GCC"; then + wlarc='$wl' + archive_cmds='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) + wlarc='' + archive_cmds='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + ;; + *) + wlarc='$wl' + archive_cmds='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + ;; + esac + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_shlibpath_var=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands '-z linker_flag'. GCC discards it without '$wl', + # but is careful enough not to reorder. + # Supported since Solaris 2.6 (maybe 2.5.1?) + if test yes = "$GCC"; then + whole_archive_flag_spec='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' + else + whole_archive_flag_spec='-z allextract$convenience -z defaultextract' + fi + ;; + esac + link_all_deplibs=yes + ;; + + sunos4*) + if test sequent = "$host_vendor"; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + sysv4) + case $host_vendor in + sni) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' + reload_cmds='$CC -r -o $output$reload_objs' + hardcode_direct=no + ;; + motorola) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; + + sysv4.3*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + export_dynamic_flag_spec='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs=yes + fi + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) + no_undefined_flag='$wl-z,text' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + runpath_var='LD_RUN_PATH' + + if test yes = "$GCC"; then + archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We CANNOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + no_undefined_flag='$wl-z,text' + allow_undefined_flag='$wl-z,nodefs' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='$wl-R,$libdir' + hardcode_libdir_separator=':' + link_all_deplibs=yes + export_dynamic_flag_spec='$wl-Bexport' + runpath_var='LD_RUN_PATH' + + if test yes = "$GCC"; then + archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + uts4*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + *) + ld_shlibs=no + ;; + esac + + if test sni = "$host_vendor"; then + case $host in + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + export_dynamic_flag_spec='$wl-Blargedynsym' + ;; + esac + fi + fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 +$as_echo "$ld_shlibs" >&6; } +test no = "$ld_shlibs" && can_build_shared=no + +with_gnu_ld=$with_gnu_ld + + + + + + + + + + + + + + + +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc=yes + + if test yes,yes = "$GCC,$enable_shared"; then + case $archive_cmds in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 +$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } +if ${lt_cv_archive_cmds_need_lc+:} false; then : + $as_echo_n "(cached) " >&6 +else + $RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl + pic_flag=$lt_prog_compiler_pic + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 + (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + then + lt_cv_archive_cmds_need_lc=no + else + lt_cv_archive_cmds_need_lc=yes + fi + allow_undefined_flag=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 +$as_echo "$lt_cv_archive_cmds_need_lc" >&6; } + archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc + ;; + esac + fi + ;; +esac + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 +$as_echo_n "checking dynamic linker characteristics... " >&6; } + +if test yes = "$GCC"; then + case $host_os in + darwin*) lt_awk_arg='/^libraries:/,/LR/' ;; + *) lt_awk_arg='/^libraries:/' ;; + esac + case $host_os in + mingw* | cegcc*) lt_sed_strip_eq='s|=\([A-Za-z]:\)|\1|g' ;; + *) lt_sed_strip_eq='s|=/|/|g' ;; + esac + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` + case $lt_search_path_spec in + *\;*) + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` + ;; + *) + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` + ;; + esac + # Ok, now we have the path, separated by spaces, we can step through it + # and add multilib dir if necessary... + lt_tmp_lt_search_path_spec= + lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + # ...but if some path component already ends with the multilib dir we assume + # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer). + case "$lt_multi_os_dir; $lt_search_path_spec " in + "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*) + lt_multi_os_dir= + ;; + esac + for lt_sys_path in $lt_search_path_spec; do + if test -d "$lt_sys_path$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir" + elif test -n "$lt_multi_os_dir"; then + test -d "$lt_sys_path" && \ + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" + fi + done + lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' +BEGIN {RS = " "; FS = "/|\n";} { + lt_foo = ""; + lt_count = 0; + for (lt_i = NF; lt_i > 0; lt_i--) { + if ($lt_i != "" && $lt_i != ".") { + if ($lt_i == "..") { + lt_count++; + } else { + if (lt_count == 0) { + lt_foo = "/" $lt_i lt_foo; + } else { + lt_count--; + } + } + } + } + if (lt_foo != "") { lt_freq[lt_foo]++; } + if (lt_freq[lt_foo] == 1) { print lt_foo; } +}'` + # AWK program above erroneously prepends '/' to C:/dos/paths + # for these hosts. + case $host_os in + mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ + $SED 's|/\([A-Za-z]:\)|\1|g'` ;; + esac + sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=.so +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + + + +case $host_os in +aix3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$release$shared_ext$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='$libname$release$shared_ext$major' + ;; + +aix[4-9]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test ia64 = "$host_cpu"; then + # AIX 5 supports IA64 + library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line '#! .'. This would cause the generated library to + # depend on '.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # Using Import Files as archive members, it is possible to support + # filename-based versioning of shared library archives on AIX. While + # this would work for both with and without runtime linking, it will + # prevent static linking of such archives. So we do filename-based + # shared library versioning with .so extension only, which is used + # when both runtime linking and shared linking is enabled. + # Unfortunately, runtime linking may impact performance, so we do + # not want this to be the default eventually. Also, we use the + # versioned .so libs for executables only if there is the -brtl + # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only. + # To allow for filename-based versioning support, we need to create + # libNAME.so.V as an archive file, containing: + # *) an Import File, referring to the versioned filename of the + # archive as well as the shared archive member, telling the + # bitwidth (32 or 64) of that shared object, and providing the + # list of exported symbols of that shared object, eventually + # decorated with the 'weak' keyword + # *) the shared object with the F_LOADONLY flag set, to really avoid + # it being seen by the linker. + # At run time we better use the real file rather than another symlink, + # but for link time we create the symlink libNAME.so -> libNAME.so.V + + case $with_aix_soname,$aix_use_runtimelinking in + # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + aix,yes) # traditional libtool + dynamic_linker='AIX unversionable lib.so' + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + ;; + aix,no) # traditional AIX only + dynamic_linker='AIX lib.a(lib.so.V)' + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='$libname$release.a $libname.a' + soname_spec='$libname$release$shared_ext$major' + ;; + svr4,*) # full svr4 only + dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)" + library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' + # We do not specify a path in Import Files, so LIBPATH fires. + shlibpath_overrides_runpath=yes + ;; + *,yes) # both, prefer svr4 + dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)" + library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' + # unpreferred sharedlib libNAME.a needs extra handling + postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"' + postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"' + # We do not specify a path in Import Files, so LIBPATH fires. + shlibpath_overrides_runpath=yes + ;; + *,no) # both, prefer aix + dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)" + library_names_spec='$libname$release.a $libname.a' + soname_spec='$libname$release$shared_ext$major' + # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling + postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)' + postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"' + ;; + esac + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac + ;; + +beos*) + library_names_spec='$libname$shared_ext' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[45]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32* | cegcc*) + version_type=windows + shrext_cmds=.dll + need_version=no + need_lib_prefix=no + + case $GCC,$cc_basename in + yes,*) + # gcc + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' + + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" + ;; + mingw* | cegcc*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' + ;; + esac + dynamic_linker='Win32 ld.exe' + ;; + + *,cl*) + # Native MSVC + libname_spec='$name' + soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' + library_names_spec='$libname.dll.lib' + + case $build_os in + mingw*) + sys_lib_search_path_spec= + lt_save_ifs=$IFS + IFS=';' + for lt_path in $LIB + do + IFS=$lt_save_ifs + # Let DOS variable expansion print the short 8.3 style file name. + lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` + sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" + done + IFS=$lt_save_ifs + # Convert to MSYS style. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` + ;; + cygwin*) + # Convert to unix form, then to dos form, then back to unix form + # but this time dos style (no spaces!) so that the unix form looks + # like /cygdrive/c/PROGRA~1:/cygdr... + sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` + sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` + sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + ;; + *) + sys_lib_search_path_spec=$LIB + if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + # FIXME: find the short name or the path components, as spaces are + # common. (e.g. "Program Files" -> "PROGRA~1") + ;; + esac + + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + dynamic_linker='Win32 link.exe' + ;; + + *) + # Assume MSVC wrapper + library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib' + dynamic_linker='Win32 ld.exe' + ;; + esac + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$major$shared_ext $libname$shared_ext' + soname_spec='$libname$release$major$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[23].*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2.*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ + freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; + +haiku*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + dynamic_linker="$host_os runtime_loader" + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=no + sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + if test 32 = "$HPUX_IA64_MODE"; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + sys_lib_dlsearch_path_spec=/usr/lib/hpux32 + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + sys_lib_dlsearch_path_spec=/usr/lib/hpux64 + fi + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + postinstall_cmds='chmod 555 $lib' + # or fails outright, so override atomically: + install_override_mode=555 + ;; + +interix[3-9]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test yes = "$lt_cv_prog_gnu_ld"; then + version_type=linux # correct to gnu/linux during the next big refactor + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='$libname$release$shared_ext$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff" + sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +linux*android*) + version_type=none # Android doesn't support versioned libraries. + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext' + soname_spec='$libname$release$shared_ext' + finish_cmds= + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + dynamic_linker='Android linker' + # Don't embed -rpath directories since the linker doesn't support them. + hardcode_libdir_flag_spec='-L$libdir' + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + + # Some binutils ld are patched to set DT_RUNPATH + if ${lt_cv_shlibpath_overrides_runpath+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_shlibpath_overrides_runpath=no + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ + LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : + lt_cv_shlibpath_overrides_runpath=yes +fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + +fi + + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Ideally, we could use ldconfig to report *all* directores which are + # searched for libraries, however this is still not possible. Aside from not + # being certain /sbin/ldconfig is available, command + # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64, + # even though it is searched at run-time. Try to do the best guess by + # appending ld.so.conf contents (and includes) to the search path. + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +*nto* | *qnx*) + version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' + ;; + +openbsd* | bitrig*) + version_type=sunos + sys_lib_dlsearch_path_spec=/usr/lib + need_lib_prefix=no + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then + need_version=no + else + need_version=yes + fi + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +os2*) + libname_spec='$name' + version_type=windows + shrext_cmds=.dll + need_version=no + need_lib_prefix=no + # OS/2 can only load a DLL with a base name of 8 characters or less. + soname_spec='`test -n "$os2dllname" && libname="$os2dllname"; + v=$($ECHO $release$versuffix | tr -d .-); + n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _); + $ECHO $n$v`$shared_ext' + library_names_spec='${libname}_dll.$libext' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=BEGINLIBPATH + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='$libname$release$shared_ext$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + +rdos*) + dynamic_linker=no + ;; + +solaris*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test yes = "$with_gnu_ld"; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec; then + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext' + soname_spec='$libname$shared_ext.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=sco + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test yes = "$with_gnu_ld"; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +uts4*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 +$as_echo "$dynamic_linker" >&6; } +test no = "$dynamic_linker" && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test yes = "$GCC"; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then + sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec +fi + +if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then + sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec +fi + +# remember unaugmented sys_lib_dlsearch_path content for libtool script decls... +configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec + +# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code +func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH" + +# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool +configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 +$as_echo_n "checking how to hardcode library paths into programs... " >&6; } +hardcode_action= +if test -n "$hardcode_libdir_flag_spec" || + test -n "$runpath_var" || + test yes = "$hardcode_automatic"; then + + # We can hardcode non-existent directories. + if test no != "$hardcode_direct" && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, )" && + test no != "$hardcode_minus_L"; then + # Linking always hardcodes the temporary library directory. + hardcode_action=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action=unsupported +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 +$as_echo "$hardcode_action" >&6; } + +if test relink = "$hardcode_action" || + test yes = "$inherit_rpath"; then + # Fast installation is not supported + enable_fast_install=no +elif test yes = "$shlibpath_overrides_runpath" || + test no = "$enable_shared"; then + # Fast installation is not necessary + enable_fast_install=needless +fi + + + + + + + if test yes != "$enable_dlopen"; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen=load_add_on + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32* | cegcc*) + lt_cv_dlopen=LoadLibrary + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen=dlopen + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if ${ac_cv_lib_dl_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dl_dlopen=yes +else + ac_cv_lib_dl_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = xyes; then : + lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl +else + + lt_cv_dlopen=dyld + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + +fi + + ;; + + tpf*) + # Don't try to run any link tests for TPF. We know it's impossible + # because TPF is a cross-compiler, and we know how we open DSOs. + lt_cv_dlopen=dlopen + lt_cv_dlopen_libs= + lt_cv_dlopen_self=no + ;; + + *) + ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" +if test "x$ac_cv_func_shl_load" = xyes; then : + lt_cv_dlopen=shl_load +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 +$as_echo_n "checking for shl_load in -ldld... " >&6; } +if ${ac_cv_lib_dld_shl_load+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char shl_load (); +int +main () +{ +return shl_load (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dld_shl_load=yes +else + ac_cv_lib_dld_shl_load=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 +$as_echo "$ac_cv_lib_dld_shl_load" >&6; } +if test "x$ac_cv_lib_dld_shl_load" = xyes; then : + lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld +else + ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" +if test "x$ac_cv_func_dlopen" = xyes; then : + lt_cv_dlopen=dlopen +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if ${ac_cv_lib_dl_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dl_dlopen=yes +else + ac_cv_lib_dl_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = xyes; then : + lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 +$as_echo_n "checking for dlopen in -lsvld... " >&6; } +if ${ac_cv_lib_svld_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lsvld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_svld_dlopen=yes +else + ac_cv_lib_svld_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 +$as_echo "$ac_cv_lib_svld_dlopen" >&6; } +if test "x$ac_cv_lib_svld_dlopen" = xyes; then : + lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 +$as_echo_n "checking for dld_link in -ldld... " >&6; } +if ${ac_cv_lib_dld_dld_link+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dld_link (); +int +main () +{ +return dld_link (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dld_dld_link=yes +else + ac_cv_lib_dld_dld_link=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 +$as_echo "$ac_cv_lib_dld_dld_link" >&6; } +if test "x$ac_cv_lib_dld_dld_link" = xyes; then : + lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld +fi + + +fi + + +fi + + +fi + + +fi + + +fi + + ;; + esac + + if test no = "$lt_cv_dlopen"; then + enable_dlopen=no + else + enable_dlopen=yes + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS=$CPPFLAGS + test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS=$LDFLAGS + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS=$LIBS + LIBS="$lt_cv_dlopen_libs $LIBS" + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 +$as_echo_n "checking whether a program can dlopen itself... " >&6; } +if ${lt_cv_dlopen_self+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test yes = "$cross_compiling"; then : + lt_cv_dlopen_self=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +#line $LINENO "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisibility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); +#endif + +int fnord () { return 42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +} +_LT_EOF + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self=no + fi +fi +rm -fr conftest* + + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 +$as_echo "$lt_cv_dlopen_self" >&6; } + + if test yes = "$lt_cv_dlopen_self"; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 +$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } +if ${lt_cv_dlopen_self_static+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test yes = "$cross_compiling"; then : + lt_cv_dlopen_self_static=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +#line $LINENO "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisibility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); +#endif + +int fnord () { return 42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +} +_LT_EOF + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self_static=no + fi +fi +rm -fr conftest* + + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 +$as_echo "$lt_cv_dlopen_self_static" >&6; } + fi + + CPPFLAGS=$save_CPPFLAGS + LDFLAGS=$save_LDFLAGS + LIBS=$save_LIBS + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi + + + + + + + + + + + + + + + + + +striplib= +old_striplib= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 +$as_echo_n "checking whether stripping libraries is possible... " >&6; } +if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP"; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + fi + ;; + *) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + ;; + esac +fi + + + + + + + + + + + + + # Report what library types will actually be built + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 +$as_echo_n "checking if libtool supports shared libraries... " >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 +$as_echo "$can_build_shared" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 +$as_echo_n "checking whether to build shared libraries... " >&6; } + test no = "$can_build_shared" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test yes = "$enable_shared" && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + + aix[4-9]*) + if test ia64 != "$host_cpu"; then + case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in + yes,aix,yes) ;; # shared object as lib.so file only + yes,svr4,*) ;; # shared object as lib.so archive member only + yes,*) enable_static=no ;; # shared object in lib.a archive as well + esac + fi + ;; + esac + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 +$as_echo "$enable_shared" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 +$as_echo_n "checking whether to build static libraries... " >&6; } + # Make sure either enable_shared or enable_static is yes. + test yes = "$enable_shared" || enable_static=yes + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 +$as_echo "$enable_static" >&6; } + + + + +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +CC=$lt_save_CC + + + + + + + + + + + + + + + + ac_config_commands="$ac_config_commands libtool" + + + + +# Only expand once: + + + + +# Some awks crash when confronted with pnglibconf.dfa, do a test run now +# to make sure this doesn't happen +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that AWK works" >&5 +$as_echo_n "checking that AWK works... " >&6; } +if ${AWK} -f ${srcdir}/scripts/options.awk out="/dev/null" version=search\ + ${srcdir}/pngconf.h ${srcdir}/scripts/pnglibconf.dfa\ + ${srcdir}/pngusr.dfa 1>&2 +then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 +$as_echo "ok" >&6; } +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 1 "failed +See \`config.log' for more details" "$LINENO" 5; } +fi + +# This is a remnant of the old cc -E validation, where it may have been +# necessary to use a different preprocessor for .dfn files +DFNCPP="$CPP" + + +# -Werror cannot be passed to GCC in CFLAGS because configure will fail (it +# checks the compiler with a program that generates a warning), add the +# following option to deal with this + +# Check whether --enable-werror was given. +if test "${enable_werror+set}" = set; then : + enableval=$enable_werror; test "$enable_werror" = "yes" && enable_werror="-Werror" + if test "$enable_werror" != "no"; then + sav_CFLAGS="$CFLAGS" + CFLAGS="$enable_werror $CFLAGS" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the compiler allows $enable_werror" >&5 +$as_echo_n "checking if the compiler allows $enable_werror... " >&6; } + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + + int main(int argc, char **argv){ + return argv[argc-1][0]; + } +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + PNG_COPTS="$PNG_COPTS $enable_werror" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + CFLAGS="$sav_CFLAGS" + fi +fi + + +# Checks for header files. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if ${ac_cv_header_stdc+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include +#include + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_stdc=yes +else + ac_cv_header_stdc=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then : + : +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + +else + ac_cv_header_stdc=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then + +$as_echo "#define STDC_HEADERS 1" >>confdefs.h + +fi + + +# Checks for typedefs, structures, and compiler characteristics. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5 +$as_echo_n "checking for an ANSI C-conforming const... " >&6; } +if ${ac_cv_c_const+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + +#ifndef __cplusplus + /* Ultrix mips cc rejects this sort of thing. */ + typedef int charset[2]; + const charset cs = { 0, 0 }; + /* SunOS 4.1.1 cc rejects this. */ + char const *const *pcpcc; + char **ppc; + /* NEC SVR4.0.2 mips cc rejects this. */ + struct point {int x, y;}; + static struct point const zero = {0,0}; + /* AIX XL C 1.02.0.0 rejects this. + It does not let you subtract one const X* pointer from another in + an arm of an if-expression whose if-part is not a constant + expression */ + const char *g = "string"; + pcpcc = &g + (g ? g-g : 0); + /* HPUX 7.0 cc rejects these. */ + ++pcpcc; + ppc = (char**) pcpcc; + pcpcc = (char const *const *) ppc; + { /* SCO 3.2v4 cc rejects this sort of thing. */ + char tx; + char *t = &tx; + char const *s = 0 ? (char *) 0 : (char const *) 0; + + *t++ = 0; + if (s) return 0; + } + { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ + int x[] = {25, 17}; + const int *foo = &x[0]; + ++foo; + } + { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ + typedef const int *iptr; + iptr p = 0; + ++p; + } + { /* AIX XL C 1.02.0.0 rejects this sort of thing, saying + "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ + struct s { int j; const int *ap[3]; } bx; + struct s *b = &bx; b->j = 5; + } + { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ + const int foo = 10; + if (!foo) return 0; + } + return !cs[0] && !zero.x; +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_c_const=yes +else + ac_cv_c_const=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5 +$as_echo "$ac_cv_c_const" >&6; } +if test $ac_cv_c_const = no; then + +$as_echo "#define const /**/" >>confdefs.h + +fi + +ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default" +if test "x$ac_cv_type_size_t" = xyes; then : + +else + +cat >>confdefs.h <<_ACEOF +#define size_t unsigned int +_ACEOF + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether struct tm is in sys/time.h or time.h" >&5 +$as_echo_n "checking whether struct tm is in sys/time.h or time.h... " >&6; } +if ${ac_cv_struct_tm+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include + +int +main () +{ +struct tm tm; + int *p = &tm.tm_sec; + return !p; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_struct_tm=time.h +else + ac_cv_struct_tm=sys/time.h +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_struct_tm" >&5 +$as_echo "$ac_cv_struct_tm" >&6; } +if test $ac_cv_struct_tm = sys/time.h; then + +$as_echo "#define TM_IN_SYS_TIME 1" >>confdefs.h + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C/C++ restrict keyword" >&5 +$as_echo_n "checking for C/C++ restrict keyword... " >&6; } +if ${ac_cv_c_restrict+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_c_restrict=no + # The order here caters to the fact that C++ does not require restrict. + for ac_kw in __restrict __restrict__ _Restrict restrict; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +typedef int * int_ptr; + int foo (int_ptr $ac_kw ip) { + return ip[0]; + } +int +main () +{ +int s[1]; + int * $ac_kw t = s; + t[0] = 0; + return foo(t) + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_c_restrict=$ac_kw +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + test "$ac_cv_c_restrict" != no && break + done + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_restrict" >&5 +$as_echo "$ac_cv_c_restrict" >&6; } + + case $ac_cv_c_restrict in + restrict) ;; + no) $as_echo "#define restrict /**/" >>confdefs.h + ;; + *) cat >>confdefs.h <<_ACEOF +#define restrict $ac_cv_c_restrict +_ACEOF + ;; + esac + + +# Checks for library functions. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working strtod" >&5 +$as_echo_n "checking for working strtod... " >&6; } +if ${ac_cv_func_strtod+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + ac_cv_func_strtod=no +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +$ac_includes_default +#ifndef strtod +double strtod (); +#endif +int +main() +{ + { + /* Some versions of Linux strtod mis-parse strings with leading '+'. */ + char *string = " +69"; + char *term; + double value; + value = strtod (string, &term); + if (value != 69 || term != (string + 4)) + return 1; + } + + { + /* Under Solaris 2.4, strtod returns the wrong value for the + terminating character under some conditions. */ + char *string = "NaN"; + char *term; + strtod (string, &term); + if (term != string && *(term - 1) == 0) + return 1; + } + return 0; +} + +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + ac_cv_func_strtod=yes +else + ac_cv_func_strtod=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_strtod" >&5 +$as_echo "$ac_cv_func_strtod" >&6; } +if test $ac_cv_func_strtod = no; then + case " $LIBOBJS " in + *" strtod.$ac_objext "* ) ;; + *) LIBOBJS="$LIBOBJS strtod.$ac_objext" + ;; +esac + +ac_fn_c_check_func "$LINENO" "pow" "ac_cv_func_pow" +if test "x$ac_cv_func_pow" = xyes; then : + +fi + +if test $ac_cv_func_pow = no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pow in -lm" >&5 +$as_echo_n "checking for pow in -lm... " >&6; } +if ${ac_cv_lib_m_pow+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lm $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char pow (); +int +main () +{ +return pow (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_m_pow=yes +else + ac_cv_lib_m_pow=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_pow" >&5 +$as_echo "$ac_cv_lib_m_pow" >&6; } +if test "x$ac_cv_lib_m_pow" = xyes; then : + POW_LIB=-lm +else + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot find library containing definition of pow" >&5 +$as_echo "$as_me: WARNING: cannot find library containing definition of pow" >&2;} +fi + +fi + +fi + +for ac_func in memset +do : + ac_fn_c_check_func "$LINENO" "memset" "ac_cv_func_memset" +if test "x$ac_cv_func_memset" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_MEMSET 1 +_ACEOF + +else + as_fn_error $? "memset not found in libc" "$LINENO" 5 +fi +done + +for ac_func in pow +do : + ac_fn_c_check_func "$LINENO" "pow" "ac_cv_func_pow" +if test "x$ac_cv_func_pow" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_POW 1 +_ACEOF + +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pow in -lm" >&5 +$as_echo_n "checking for pow in -lm... " >&6; } +if ${ac_cv_lib_m_pow+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lm $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char pow (); +int +main () +{ +return pow (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_m_pow=yes +else + ac_cv_lib_m_pow=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_pow" >&5 +$as_echo "$ac_cv_lib_m_pow" >&6; } +if test "x$ac_cv_lib_m_pow" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBM 1 +_ACEOF + + LIBS="-lm $LIBS" + +else + as_fn_error $? "cannot find pow" "$LINENO" 5 +fi + +fi +done + + +# Check whether --with-zlib-prefix was given. +if test "${with_zlib_prefix+set}" = set; then : + withval=$with_zlib_prefix; ZPREFIX=${withval} +else + ZPREFIX='z_' +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for zlibVersion in -lz" >&5 +$as_echo_n "checking for zlibVersion in -lz... " >&6; } +if ${ac_cv_lib_z_zlibVersion+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lz $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char zlibVersion (); +int +main () +{ +return zlibVersion (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_z_zlibVersion=yes +else + ac_cv_lib_z_zlibVersion=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_z_zlibVersion" >&5 +$as_echo "$ac_cv_lib_z_zlibVersion" >&6; } +if test "x$ac_cv_lib_z_zlibVersion" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBZ 1 +_ACEOF + + LIBS="-lz $LIBS" + +else + as_ac_Lib=`$as_echo "ac_cv_lib_z_${ZPREFIX}zlibVersion" | $as_tr_sh` +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ZPREFIX}zlibVersion in -lz" >&5 +$as_echo_n "checking for ${ZPREFIX}zlibVersion in -lz... " >&6; } +if eval \${$as_ac_Lib+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lz $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char ${ZPREFIX}zlibVersion (); +int +main () +{ +return ${ZPREFIX}zlibVersion (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$as_ac_Lib=yes" +else + eval "$as_ac_Lib=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +eval ac_res=\$$as_ac_Lib + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +if eval test \"x\$"$as_ac_Lib"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBZ 1 +_ACEOF + + LIBS="-lz $LIBS" + +else + as_fn_error $? "zlib not installed" "$LINENO" 5 +fi + +fi + + +# The following is for pngvalid, to ensure it catches FP errors even on +# platforms that don't enable FP exceptions, the function appears in the math +# library (typically), it's not an error if it is not found. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for feenableexcept in -lm" >&5 +$as_echo_n "checking for feenableexcept in -lm... " >&6; } +if ${ac_cv_lib_m_feenableexcept+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lm $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char feenableexcept (); +int +main () +{ +return feenableexcept (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_m_feenableexcept=yes +else + ac_cv_lib_m_feenableexcept=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_feenableexcept" >&5 +$as_echo "$ac_cv_lib_m_feenableexcept" >&6; } +if test "x$ac_cv_lib_m_feenableexcept" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBM 1 +_ACEOF + + LIBS="-lm $LIBS" + +fi + +for ac_func in feenableexcept +do : + ac_fn_c_check_func "$LINENO" "feenableexcept" "ac_cv_func_feenableexcept" +if test "x$ac_cv_func_feenableexcept" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_FEENABLEEXCEPT 1 +_ACEOF + +fi +done + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if using Solaris linker" >&5 +$as_echo_n "checking if using Solaris linker... " >&6; } +SLD=`$LD --version 2>&1 | grep Solaris` +if test "$SLD"; then + have_solaris_ld=yes + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + have_solaris_ld=no + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + if test "$have_solaris_ld" = "yes"; then + HAVE_SOLARIS_LD_TRUE= + HAVE_SOLARIS_LD_FALSE='#' +else + HAVE_SOLARIS_LD_TRUE='#' + HAVE_SOLARIS_LD_FALSE= +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if libraries can be versioned" >&5 +$as_echo_n "checking if libraries can be versioned... " >&6; } +# Special case for PE/COFF platforms: ld reports +# support for version-script, but doesn't actually +# DO anything with it. +case $host in +*cygwin* | *mingw32* | *interix* ) + have_ld_version_script=no + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +;; +* ) + +if test "$have_solaris_ld" = "yes"; then + GLD=`$LD --help < /dev/null 2>&1 | grep 'M mapfile'` +else + GLD=`$LD --help < /dev/null 2>/dev/null | grep version-script` +fi + +if test "$GLD"; then + have_ld_version_script=yes + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + have_ld_version_script=no + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: *** You have not enabled versioned symbols." >&5 +$as_echo "$as_me: WARNING: *** You have not enabled versioned symbols." >&2;} +fi +;; +esac + + if test "$have_ld_version_script" = "yes"; then + HAVE_LD_VERSION_SCRIPT_TRUE= + HAVE_LD_VERSION_SCRIPT_FALSE='#' +else + HAVE_LD_VERSION_SCRIPT_TRUE='#' + HAVE_LD_VERSION_SCRIPT_FALSE= +fi + + +if test "$have_ld_version_script" = "yes"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for symbol prefix" >&5 +$as_echo_n "checking for symbol prefix... " >&6; } + SYMBOL_PREFIX=`echo "PREFIX=__USER_LABEL_PREFIX__" \ + | ${CPP-${CC-gcc} -E} - 2>&1 \ + | ${EGREP-grep} "^PREFIX=" \ + | ${SED-sed} -e "s:^PREFIX=::" -e "s:__USER_LABEL_PREFIX__::"` + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SYMBOL_PREFIX" >&5 +$as_echo "$SYMBOL_PREFIX" >&6; } +fi + +# Substitutions for .in files + + + + + +# Additional arguments (and substitutions) +# Allow the pkg-config directory to be set + +# Check whether --with-pkgconfigdir was given. +if test "${with_pkgconfigdir+set}" = set; then : + withval=$with_pkgconfigdir; pkgconfigdir=${withval} +else + pkgconfigdir='${libdir}/pkgconfig' +fi + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: pkgconfig directory is ${pkgconfigdir}" >&5 +$as_echo "$as_me: pkgconfig directory is ${pkgconfigdir}" >&6;} + +# Make the *-config binary config scripts optional + +# Check whether --with-binconfigs was given. +if test "${with_binconfigs+set}" = set; then : + withval=$with_binconfigs; if test "${withval}" = no; then + binconfigs= + { $as_echo "$as_me:${as_lineno-$LINENO}: libpng-config scripts will not be built" >&5 +$as_echo "$as_me: libpng-config scripts will not be built" >&6;} + else + binconfigs='${binconfigs}' + fi +else + binconfigs='${binconfigs}' +fi + + + +# Support for prefixes to the API function names; this will generate defines +# at the start of the build to rename exported library functions + +# Check whether --with-libpng-prefix was given. +if test "${with_libpng_prefix+set}" = set; then : + withval=$with_libpng_prefix; if test "${withval:-no}" != "no"; then + PNG_PREFIX=${withval} + + fi +fi + + if test "${with_libpng_prefix:-no}" != "no"; then + DO_PNG_PREFIX_TRUE= + DO_PNG_PREFIX_FALSE='#' +else + DO_PNG_PREFIX_TRUE='#' + DO_PNG_PREFIX_FALSE= +fi + + +# Control over what links are made for installed files. Versioned files are +# always installed, when the following options are turned on corresponding +# unversioned links are also created (normally as symbolic links): +# Check whether --enable-unversioned-links was given. +if test "${enable_unversioned_links+set}" = set; then : + enableval=$enable_unversioned_links; +fi + + +# The AM_CONDITIONAL test is written so that the default is enabled; +# --disable-unversioned-links must be given to turn the option off. + if test "$enable_unversioned_links" != "no"; then + DO_INSTALL_LINKS_TRUE= + DO_INSTALL_LINKS_FALSE='#' +else + DO_INSTALL_LINKS_TRUE='#' + DO_INSTALL_LINKS_FALSE= +fi + + +# Check whether --enable-unversioned-libpng-pc was given. +if test "${enable_unversioned_libpng_pc+set}" = set; then : + enableval=$enable_unversioned_libpng_pc; +fi + + if test "$enable_unversioned_libpng_pc" != "no"; then + DO_INSTALL_LIBPNG_PC_TRUE= + DO_INSTALL_LIBPNG_PC_FALSE='#' +else + DO_INSTALL_LIBPNG_PC_TRUE='#' + DO_INSTALL_LIBPNG_PC_FALSE= +fi + + +# Check whether --enable-unversioned-libpng-config was given. +if test "${enable_unversioned_libpng_config+set}" = set; then : + enableval=$enable_unversioned_libpng_config; +fi + + if test "$enable_unversioned_libpng_config" != "no"; then + DO_INSTALL_LIBPNG_CONFIG_TRUE= + DO_INSTALL_LIBPNG_CONFIG_FALSE='#' +else + DO_INSTALL_LIBPNG_CONFIG_TRUE='#' + DO_INSTALL_LIBPNG_CONFIG_FALSE= +fi + + +# HOST SPECIFIC OPTIONS +# ===================== +# +# ARM +# === +# +# ARM NEON (SIMD) support. + +# Check whether --enable-arm-neon was given. +if test "${enable_arm_neon+set}" = set; then : + enableval=$enable_arm_neon; case "$enableval" in + no|off) + # disable the default enabling on __ARM_NEON__ systems: + +$as_echo "#define PNG_ARM_NEON_OPT 0" >>confdefs.h + + # Prevent inclusion of the assembler files below: + enable_arm_neon=no;; + check) + +$as_echo "#define PNG_ARM_NEON_CHECK_SUPPORTED /**/" >>confdefs.h +;; + api) + +$as_echo "#define PNG_ARM_NEON_API_SUPPORTED /**/" >>confdefs.h +;; + yes|on) + +$as_echo "#define PNG_ARM_NEON_OPT 2" >>confdefs.h + + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: --enable-arm-neon: please specify 'check' or 'api', if + you want the optimizations unconditionally pass -mfpu=neon + to the compiler." >&5 +$as_echo "$as_me: WARNING: --enable-arm-neon: please specify 'check' or 'api', if + you want the optimizations unconditionally pass -mfpu=neon + to the compiler." >&2;};; + *) + as_fn_error $? "--enable-arm-neon=${enable_arm_neon}: invalid value" "$LINENO" 5 + esac +fi + + +# Add ARM specific files to all builds where the host_cpu is arm ('arm*') or +# where ARM optimizations were explicitly requested (this allows a fallback if a +# future host CPU does not match 'arm*') + + if test "$enable_arm_neon" != 'no' && + case "$host_cpu" in + arm*|aarch64*) :;; + *) test "$enable_arm_neon" != '';; + esac; then + PNG_ARM_NEON_TRUE= + PNG_ARM_NEON_FALSE='#' +else + PNG_ARM_NEON_TRUE='#' + PNG_ARM_NEON_FALSE= +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: Extra options for compiler: $PNG_COPTS" >&5 +$as_echo "$as_me: Extra options for compiler: $PNG_COPTS" >&6;} + +# Config files, substituting as above +ac_config_files="$ac_config_files Makefile libpng.pc:libpng.pc.in" + +ac_config_files="$ac_config_files libpng-config:libpng-config.in" + + +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, we kill variables containing newlines. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes: double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \. + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) | + sed ' + /^ac_cv_env_/b end + t clear + :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + if test "x$cache_file" != "x/dev/null"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 +$as_echo "$as_me: updating cache $cache_file" >&6;} + if test ! -f "$cache_file" || test -h "$cache_file"; then + cat confcache >"$cache_file" + else + case $cache_file in #( + */* | ?:*) + mv -f confcache "$cache_file"$$ && + mv -f "$cache_file"$$ "$cache_file" ;; #( + *) + mv -f confcache "$cache_file" ;; + esac + fi + fi + else + { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 +$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +DEFS=-DHAVE_CONFIG_H + +ac_libobjs= +ac_ltlibobjs= +U= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`$as_echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" + as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 +$as_echo_n "checking that generated files are newer than configure... " >&6; } + if test -n "$am_sleep_pid"; then + # Hide warnings about reused PIDs. + wait $am_sleep_pid 2>/dev/null + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 +$as_echo "done" >&6; } + if test -n "$EXEEXT"; then + am__EXEEXT_TRUE= + am__EXEEXT_FALSE='#' +else + am__EXEEXT_TRUE='#' + am__EXEEXT_FALSE= +fi + +if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then + as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then + as_fn_error $? "conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then + as_fn_error $? "conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${am__fastdepCCAS_TRUE}" && test -z "${am__fastdepCCAS_FALSE}"; then + as_fn_error $? "conditional \"am__fastdepCCAS\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${HAVE_SOLARIS_LD_TRUE}" && test -z "${HAVE_SOLARIS_LD_FALSE}"; then + as_fn_error $? "conditional \"HAVE_SOLARIS_LD\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${HAVE_LD_VERSION_SCRIPT_TRUE}" && test -z "${HAVE_LD_VERSION_SCRIPT_FALSE}"; then + as_fn_error $? "conditional \"HAVE_LD_VERSION_SCRIPT\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${DO_PNG_PREFIX_TRUE}" && test -z "${DO_PNG_PREFIX_FALSE}"; then + as_fn_error $? "conditional \"DO_PNG_PREFIX\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${DO_INSTALL_LINKS_TRUE}" && test -z "${DO_INSTALL_LINKS_FALSE}"; then + as_fn_error $? "conditional \"DO_INSTALL_LINKS\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${DO_INSTALL_LIBPNG_PC_TRUE}" && test -z "${DO_INSTALL_LIBPNG_PC_FALSE}"; then + as_fn_error $? "conditional \"DO_INSTALL_LIBPNG_PC\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${DO_INSTALL_LIBPNG_CONFIG_TRUE}" && test -z "${DO_INSTALL_LIBPNG_CONFIG_FALSE}"; then + as_fn_error $? "conditional \"DO_INSTALL_LIBPNG_CONFIG\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${PNG_ARM_NEON_TRUE}" && test -z "${PNG_ARM_NEON_FALSE}"; then + as_fn_error $? "conditional \"PNG_ARM_NEON\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi + +: "${CONFIG_STATUS=./config.status}" +ac_write_fail=0 +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +as_write_fail=0 +cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false + +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +exec 6>&1 +## ----------------------------------- ## +## Main body of $CONFIG_STATUS script. ## +## ----------------------------------- ## +_ASEOF +test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# Save the log message, to keep $0 and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by libpng $as_me 1.6.21, which was +generated by GNU Autoconf 2.69. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + +_ACEOF + +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac + +case $ac_config_headers in *" +"*) set x $ac_config_headers; shift; ac_config_headers=$*;; +esac + + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# Files that config.status was made for. +config_files="$ac_config_files" +config_headers="$ac_config_headers" +config_commands="$ac_config_commands" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +ac_cs_usage="\ +\`$as_me' instantiates files and other configuration actions +from templates according to the current configuration. Unless the files +and actions are specified as TAGs, all are instantiated by default. + +Usage: $0 [OPTION]... [TAG]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + --config print configuration, then exit + -q, --quiet, --silent + do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + --header=FILE[:TEMPLATE] + instantiate the configuration header FILE + +Configuration files: +$config_files + +Configuration headers: +$config_headers + +Configuration commands: +$config_commands + +Report bugs to ." + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" +ac_cs_version="\\ +libpng config.status 1.6.21 +configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" + +Copyright (C) 2012 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +INSTALL='$INSTALL' +MKDIR_P='$MKDIR_P' +AWK='$AWK' +test -n "\$AWK" || AWK=awk +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# The default lists apply if the user does not specify any file. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=?*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + --*=) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg= + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac + + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + $as_echo "$ac_cs_version"; exit ;; + --config | --confi | --conf | --con | --co | --c ) + $as_echo "$ac_cs_config"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + '') as_fn_error $? "missing file argument" ;; + esac + as_fn_append CONFIG_FILES " '$ac_optarg'" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + as_fn_append CONFIG_HEADERS " '$ac_optarg'" + ac_need_defaults=false;; + --he | --h) + # Conflict between --help and --header + as_fn_error $? "ambiguous option: \`$1' +Try \`$0 --help' for more information.";; + --help | --hel | -h ) + $as_echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) as_fn_error $? "unrecognized option: \`$1' +Try \`$0 --help' for more information." ;; + + *) as_fn_append ac_config_targets " $1" + ac_need_defaults=false ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +if \$ac_cs_recheck; then + set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + shift + \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 + CONFIG_SHELL='$SHELL' + export CONFIG_SHELL + exec "\$@" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + $as_echo "$ac_log" +} >&5 + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# +# INIT-COMMANDS +# +AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" + + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +sed_quote_subst='$sed_quote_subst' +double_quote_subst='$double_quote_subst' +delay_variable_subst='$delay_variable_subst' +SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`' +Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`' +GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`' +EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`' +FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`' +SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' +ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' +LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`' +macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' +macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' +AS='`$ECHO "$AS" | $SED "$delay_single_quote_subst"`' +DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' +OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' +enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' +enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' +pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' +enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' +shared_archive_member_spec='`$ECHO "$shared_archive_member_spec" | $SED "$delay_single_quote_subst"`' +PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`' +host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' +host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' +host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' +build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`' +build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`' +build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`' +NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`' +LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`' +max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`' +ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`' +exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' +lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' +lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' +lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' +lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' +lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' +reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' +reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' +deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' +file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' +file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' +want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' +sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' +AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' +AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' +archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' +STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' +RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' +old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' +old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`' +old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`' +lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`' +CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`' +CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`' +compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' +GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_import='`$ECHO "$lt_cv_sys_global_symbol_to_import" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' +lt_cv_nm_interface='`$ECHO "$lt_cv_nm_interface" | $SED "$delay_single_quote_subst"`' +nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' +lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' +lt_cv_truncate_bin='`$ECHO "$lt_cv_truncate_bin" | $SED "$delay_single_quote_subst"`' +objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' +MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' +lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' +need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' +MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' +DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' +NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' +LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' +OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`' +OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`' +libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`' +shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`' +extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`' +archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`' +enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`' +export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`' +whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`' +compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`' +old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`' +old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`' +archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`' +archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`' +module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`' +module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`' +with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`' +allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' +no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' +hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' +hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' +hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' +hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`' +hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`' +hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' +inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' +link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' +always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' +export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' +exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' +include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' +prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' +postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' +file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' +variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' +need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' +need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`' +version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`' +runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`' +shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`' +shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`' +libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`' +library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`' +soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`' +install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`' +postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`' +postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`' +finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' +finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' +hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' +sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' +configure_time_dlsearch_path='`$ECHO "$configure_time_dlsearch_path" | $SED "$delay_single_quote_subst"`' +configure_time_lt_sys_library_path='`$ECHO "$configure_time_lt_sys_library_path" | $SED "$delay_single_quote_subst"`' +hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' +enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' +enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' +enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`' +old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`' +striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`' + +LTCC='$LTCC' +LTCFLAGS='$LTCFLAGS' +compiler='$compiler_DEFAULT' + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$1 +_LTECHO_EOF' +} + +# Quote evaled strings. +for var in SED \ +GREP \ +EGREP \ +FGREP \ +SHELL \ +ECHO \ +LD \ +AS \ +DLLTOOL \ +OBJDUMP \ +PATH_SEPARATOR \ +NM \ +LN_S \ +lt_SP2NL \ +lt_NL2SP \ +reload_flag \ +deplibs_check_method \ +file_magic_cmd \ +file_magic_glob \ +want_nocaseglob \ +sharedlib_from_linklib_cmd \ +AR \ +AR_FLAGS \ +archiver_list_spec \ +STRIP \ +RANLIB \ +CC \ +CFLAGS \ +compiler \ +lt_cv_sys_global_symbol_pipe \ +lt_cv_sys_global_symbol_to_cdecl \ +lt_cv_sys_global_symbol_to_import \ +lt_cv_sys_global_symbol_to_c_name_address \ +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ +lt_cv_nm_interface \ +nm_file_list_spec \ +lt_cv_truncate_bin \ +lt_prog_compiler_no_builtin_flag \ +lt_prog_compiler_pic \ +lt_prog_compiler_wl \ +lt_prog_compiler_static \ +lt_cv_prog_compiler_c_o \ +need_locks \ +MANIFEST_TOOL \ +DSYMUTIL \ +NMEDIT \ +LIPO \ +OTOOL \ +OTOOL64 \ +shrext_cmds \ +export_dynamic_flag_spec \ +whole_archive_flag_spec \ +compiler_needs_object \ +with_gnu_ld \ +allow_undefined_flag \ +no_undefined_flag \ +hardcode_libdir_flag_spec \ +hardcode_libdir_separator \ +exclude_expsyms \ +include_expsyms \ +file_list_spec \ +variables_saved_for_relink \ +libname_spec \ +library_names_spec \ +soname_spec \ +install_override_mode \ +finish_eval \ +old_striplib \ +striplib; do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[\\\\\\\`\\"\\\$]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +# Double-quote double-evaled strings. +for var in reload_cmds \ +old_postinstall_cmds \ +old_postuninstall_cmds \ +old_archive_cmds \ +extract_expsyms_cmds \ +old_archive_from_new_cmds \ +old_archive_from_expsyms_cmds \ +archive_cmds \ +archive_expsym_cmds \ +module_cmds \ +module_expsym_cmds \ +export_symbols_cmds \ +prelink_cmds \ +postlink_cmds \ +postinstall_cmds \ +postuninstall_cmds \ +finish_cmds \ +sys_lib_search_path_spec \ +configure_time_dlsearch_path \ +configure_time_lt_sys_library_path; do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[\\\\\\\`\\"\\\$]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +ac_aux_dir='$ac_aux_dir' + +# See if we are running on zsh, and set the options that allow our +# commands through without removal of \ escapes INIT. +if test -n "\${ZSH_VERSION+set}"; then + setopt NO_GLOB_SUBST +fi + + + PACKAGE='$PACKAGE' + VERSION='$VERSION' + RM='$RM' + ofile='$ofile' + + + + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; + "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + "libpng.pc") CONFIG_FILES="$CONFIG_FILES libpng.pc:libpng.pc.in" ;; + "libpng-config") CONFIG_FILES="$CONFIG_FILES libpng-config:libpng-config.in" ;; + + *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; + esac +done + + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers + test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. +$debug || +{ + tmp= ac_tmp= + trap 'exit_status=$? + : "${ac_tmp:=$tmp}" + { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status +' 0 + trap 'as_fn_exit 1' 1 2 13 15 +} +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 +ac_tmp=$tmp + +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. +if test -n "$CONFIG_FILES"; then + + +ac_cr=`echo X | tr X '\015'` +# On cygwin, bash can eat \r inside `` if the user requested igncr. +# But we know of no other shell where ac_cr would be empty at this +# point, so we can use a bashism as a fallback. +if test "x$ac_cr" = x; then + eval ac_cr=\$\'\\r\' +fi +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' +else + ac_cs_awk_cr=$ac_cr +fi + +echo 'BEGIN {' >"$ac_tmp/subs1.awk" && +_ACEOF + + +{ + echo "cat >conf$$subs.awk <<_ACEOF" && + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" +} >conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 +ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + . ./conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done +rm -f conf$$subs.sh + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && +_ACEOF +sed -n ' +h +s/^/S["/; s/!.*/"]=/ +p +g +s/^[^!]*!// +:repl +t repl +s/'"$ac_delim"'$// +t delim +:nl +h +s/\(.\{148\}\)..*/\1/ +t more1 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +p +n +b repl +:more1 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t nl +:delim +h +s/\(.\{148\}\)..*/\1/ +t more2 +s/["\\]/\\&/g; s/^/"/; s/$/"/ +p +b +:more2 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t delim +' >$CONFIG_STATUS || ac_write_fail=1 +rm -f conf$$subs.awk +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACAWK +cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" + +} +{ + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } + + print line +} + +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +else + cat +fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ + || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 +_ACEOF + +# VPATH may cause trouble with some makes, so we remove sole $(srcdir), +# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ +h +s/// +s/^/:/ +s/[ ]*$/:/ +s/:\$(srcdir):/:/g +s/:\${srcdir}:/:/g +s/:@srcdir@:/:/g +s/^:*// +s/:*$// +x +s/\(=[ ]*\).*/\1/ +G +s/\n// +s/^[^=]*=[ ]*$// +}' +fi + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +fi # test -n "$CONFIG_FILES" + +# Set up the scripts for CONFIG_HEADERS section. +# No need to generate them if there are no CONFIG_HEADERS. +# This happens for instance with `./config.status Makefile'. +if test -n "$CONFIG_HEADERS"; then +cat >"$ac_tmp/defines.awk" <<\_ACAWK || +BEGIN { +_ACEOF + +# Transform confdefs.h into an awk script `defines.awk', embedded as +# here-document in config.status, that substitutes the proper values into +# config.h.in to produce config.h. + +# Create a delimiter string that does not exist in confdefs.h, to ease +# handling of long lines. +ac_delim='%!_!# ' +for ac_last_try in false false :; do + ac_tt=`sed -n "/$ac_delim/p" confdefs.h` + if test -z "$ac_tt"; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done + +# For the awk script, D is an array of macro values keyed by name, +# likewise P contains macro parameters if any. Preserve backslash +# newline sequences. + +ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* +sed -n ' +s/.\{148\}/&'"$ac_delim"'/g +t rset +:rset +s/^[ ]*#[ ]*define[ ][ ]*/ / +t def +d +:def +s/\\$// +t bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3"/p +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p +d +:bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3\\\\\\n"\\/p +t cont +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p +t cont +d +:cont +n +s/.\{148\}/&'"$ac_delim"'/g +t clear +:clear +s/\\$// +t bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/"/p +d +:bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p +b cont +' >$CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + for (key in D) D_is_set[key] = 1 + FS = "" +} +/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { + line = \$ 0 + split(line, arg, " ") + if (arg[1] == "#") { + defundef = arg[2] + mac1 = arg[3] + } else { + defundef = substr(arg[1], 2) + mac1 = arg[2] + } + split(mac1, mac2, "(") #) + macro = mac2[1] + prefix = substr(line, 1, index(line, defundef) - 1) + if (D_is_set[macro]) { + # Preserve the white space surrounding the "#". + print prefix "define", macro P[macro] D[macro] + next + } else { + # Replace #undef with comments. This is necessary, for example, + # in the case of _POSIX_SOURCE, which is predefined and required + # on some systems where configure will not decide to define it. + if (defundef == "undef") { + print "/*", prefix defundef, macro, "*/" + next + } + } +} +{ print } +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 +fi # test -n "$CONFIG_HEADERS" + + +eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" +shift +for ac_tag +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$ac_tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + as_fn_append ac_file_inputs " '$ac_f'" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} + fi + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac + + case $ac_tag in + *:-:* | *:-) cat >"$ac_tmp/stdin" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; + esac + ;; + esac + + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir="$ac_dir"; as_fn_mkdir_p + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + + case $ac_mode in + :F) + # + # CONFIG_FILE + # + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac + ac_MKDIR_P=$MKDIR_P + case $MKDIR_P in + [\\/$]* | ?:[\\/]* ) ;; + */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; + esac +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= +ac_sed_dataroot=' +/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac +_ACEOF + +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_sed_extra="$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s|@configure_input@|$ac_sed_conf_input|;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +s&@INSTALL@&$ac_INSTALL&;t t +s&@MKDIR_P@&$ac_MKDIR_P&;t t +$ac_datarootdir_hack +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ + >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ + "$ac_tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&5 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&2;} + + rm -f "$ac_tmp/stdin" + case $ac_file in + -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; + *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; + esac \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + ;; + :H) + # + # CONFIG_HEADER + # + if test x"$ac_file" != x-; then + { + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" + } >"$ac_tmp/config.h" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 +$as_echo "$as_me: $ac_file is unchanged" >&6;} + else + rm -f "$ac_file" + mv "$ac_tmp/config.h" "$ac_file" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + fi + else + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ + || as_fn_error $? "could not create -" "$LINENO" 5 + fi +# Compute "$ac_file"'s index in $config_headers. +_am_arg="$ac_file" +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || +$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$_am_arg" : 'X\(//\)[^/]' \| \ + X"$_am_arg" : 'X\(//\)$' \| \ + X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$_am_arg" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'`/stamp-h$_am_stamp_count + ;; + + :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 +$as_echo "$as_me: executing $ac_file commands" >&6;} + ;; + esac + + + case $ac_file$ac_mode in + "depfiles":C) test x"$AMDEP_TRUE" != x"" || { + # Older Autoconf quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named 'Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`$as_dirname -- "$mf" || +$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$mf" : 'X\(//\)[^/]' \| \ + X"$mf" : 'X\(//\)$' \| \ + X"$mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$mf" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running 'make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "$am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`$as_dirname -- "$file" || +$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$file" : 'X\(//\)[^/]' \| \ + X"$file" : 'X\(//\)$' \| \ + X"$file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir=$dirpart/$fdir; as_fn_mkdir_p + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} + ;; + "libtool":C) + + # See if we are running on zsh, and set the options that allow our + # commands through without removal of \ escapes. + if test -n "${ZSH_VERSION+set}"; then + setopt NO_GLOB_SUBST + fi + + cfgfile=${ofile}T + trap "$RM \"$cfgfile\"; exit 1" 1 2 15 + $RM "$cfgfile" + + cat <<_LT_EOF >> "$cfgfile" +#! $SHELL +# Generated automatically by $as_me ($PACKAGE) $VERSION +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# NOTE: Changes made to this file will be lost: look at ltmain.sh. + +# Provide generalized library-building support services. +# Written by Gordon Matzigkeit, 1996 + +# Copyright (C) 2014 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# GNU Libtool is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of of the License, or +# (at your option) any later version. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program or library that is built +# using GNU Libtool, you may include this file under the same +# distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + + +# The names of the tagged configurations supported by this script. +available_tags='' + +# Configured defaults for sys_lib_dlsearch_path munging. +: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"} + +# ### BEGIN LIBTOOL CONFIG + +# A sed program that does not truncate output. +SED=$lt_SED + +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="\$SED -e 1s/^X//" + +# A grep program that handles long lines. +GREP=$lt_GREP + +# An ERE matcher. +EGREP=$lt_EGREP + +# A literal string matcher. +FGREP=$lt_FGREP + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# An echo program that protects backslashes. +ECHO=$lt_ECHO + +# Which release of libtool.m4 was used? +macro_version=$macro_version +macro_revision=$macro_revision + +# Assembler program. +AS=$lt_AS + +# DLL creation program. +DLLTOOL=$lt_DLLTOOL + +# Object dumper program. +OBJDUMP=$lt_OBJDUMP + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# What type of objects to build. +pic_mode=$pic_mode + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# Shared archive member basename,for filename based shared library versioning on AIX. +shared_archive_member_spec=$shared_archive_member_spec + +# The PATH separator for the build system. +PATH_SEPARATOR=$lt_PATH_SEPARATOR + +# The host system. +host_alias=$host_alias +host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os + +# A BSD- or MS-compatible name lister. +NM=$lt_NM + +# Whether we need soft or hard links. +LN_S=$lt_LN_S + +# What is the maximum length of a command? +max_cmd_len=$max_cmd_len + +# Object file suffix (normally "o"). +objext=$ac_objext + +# Executable file suffix (normally ""). +exeext=$exeext + +# whether the shell understands "unset". +lt_unset=$lt_unset + +# turn spaces into newlines. +SP2NL=$lt_lt_SP2NL + +# turn newlines into spaces. +NL2SP=$lt_lt_NL2SP + +# convert \$build file names to \$host format. +to_host_file_cmd=$lt_cv_to_host_file_cmd + +# convert \$build files to toolchain format. +to_tool_file_cmd=$lt_cv_to_tool_file_cmd + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method = "file_magic". +file_magic_cmd=$lt_file_magic_cmd + +# How to find potential files when deplibs_check_method = "file_magic". +file_magic_glob=$lt_file_magic_glob + +# Find potential files using nocaseglob when deplibs_check_method = "file_magic". +want_nocaseglob=$lt_want_nocaseglob + +# Command to associate shared and link libraries. +sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd + +# The archiver. +AR=$lt_AR + +# Flags to create an archive. +AR_FLAGS=$lt_AR_FLAGS + +# How to feed a file listing to the archiver. +archiver_list_spec=$lt_archiver_list_spec + +# A symbol stripping program. +STRIP=$lt_STRIP + +# Commands used to install an old-style archive. +RANLIB=$lt_RANLIB +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Whether to use a lock for old archive extraction. +lock_old_archive_extraction=$lock_old_archive_extraction + +# A C compiler. +LTCC=$lt_CC + +# LTCC compiler flags. +LTCFLAGS=$lt_CFLAGS + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration. +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm into a list of symbols to manually relocate. +global_symbol_to_import=$lt_lt_cv_sys_global_symbol_to_import + +# Transform the output of nm in a C name address pair. +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# Transform the output of nm in a C name address pair when lib prefix is needed. +global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix + +# The name lister interface. +nm_interface=$lt_lt_cv_nm_interface + +# Specify filename containing input files for \$NM. +nm_file_list_spec=$lt_nm_file_list_spec + +# The root where to search for dependent libraries,and where our libraries should be installed. +lt_sysroot=$lt_sysroot + +# Command to truncate a binary pipe. +lt_truncate_bin=$lt_lt_cv_truncate_bin + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# Used to examine libraries when file_magic_cmd begins with "file". +MAGIC_CMD=$MAGIC_CMD + +# Must we lock files when doing compilation? +need_locks=$lt_need_locks + +# Manifest tool. +MANIFEST_TOOL=$lt_MANIFEST_TOOL + +# Tool to manipulate archived DWARF debug symbol files on Mac OS X. +DSYMUTIL=$lt_DSYMUTIL + +# Tool to change global to local symbols on Mac OS X. +NMEDIT=$lt_NMEDIT + +# Tool to manipulate fat objects and archives on Mac OS X. +LIPO=$lt_LIPO + +# ldd/readelf like tool for Mach-O binaries on Mac OS X. +OTOOL=$lt_OTOOL + +# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. +OTOOL64=$lt_OTOOL64 + +# Old archive suffix (normally "a"). +libext=$libext + +# Shared library suffix (normally ".so"). +shrext_cmds=$lt_shrext_cmds + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at link time. +variables_saved_for_relink=$lt_variables_saved_for_relink + +# Do we need the "lib" prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Library versioning type. +version_type=$version_type + +# Shared library runtime path variable. +runpath_var=$runpath_var + +# Shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Permission mode override for installation of shared libraries. +install_override_mode=$lt_install_override_mode + +# Command to use after installation of a shared archive. +postinstall_cmds=$lt_postinstall_cmds + +# Command to use after uninstallation of a shared archive. +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# As "finish_cmds", except a single script fragment to be evaled but +# not shown. +finish_eval=$lt_finish_eval + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Compile-time system search path for libraries. +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Detected run-time system search path for libraries. +sys_lib_dlsearch_path_spec=$lt_configure_time_dlsearch_path + +# Explicit LT_SYS_LIBRARY_PATH set during ./configure time. +configure_time_lt_sys_library_path=$lt_configure_time_lt_sys_library_path + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + + +# The linker used to build libraries. +LD=$lt_LD + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# Commands used to build an old-style archive. +old_archive_cmds=$lt_old_archive_cmds + +# A language specific compiler. +CC=$lt_compiler + +# Is the compiler the GNU compiler? +with_gcc=$GCC + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag + +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic + +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc + +# Whether or not to disallow shared libs when runtime libs are static. +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec + +# Whether the compiler copes with passing no objects directly. +compiler_needs_object=$lt_compiler_needs_object + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds + +# Commands used to build a shared archive. +archive_cmds=$lt_archive_cmds +archive_expsym_cmds=$lt_archive_expsym_cmds + +# Commands used to build a loadable module if different from building +# a shared archive. +module_cmds=$lt_module_cmds +module_expsym_cmds=$lt_module_expsym_cmds + +# Whether we are building with GNU ld or not. +with_gnu_ld=$lt_with_gnu_ld + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag + +# Flag that enforces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec + +# Whether we need a single "-rpath" flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator + +# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes +# DIR into the resulting binary. +hardcode_direct=$hardcode_direct + +# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes +# DIR into the resulting binary and the resulting library dependency is +# "absolute",i.e impossible to change by setting \$shlibpath_var if the +# library is relocated. +hardcode_direct_absolute=$hardcode_direct_absolute + +# Set to "yes" if using the -LDIR flag during linking hardcodes DIR +# into the resulting binary. +hardcode_minus_L=$hardcode_minus_L + +# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR +# into the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var + +# Set to "yes" if building a shared library automatically hardcodes DIR +# into the library and all subsequent libraries and executables linked +# against it. +hardcode_automatic=$hardcode_automatic + +# Set to yes if linker adds runtime paths of dependent libraries +# to runtime path list. +inherit_rpath=$inherit_rpath + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs + +# Set to "yes" if exported symbols are required. +always_export_symbols=$always_export_symbols + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms + +# Commands necessary for linking programs (against libraries) with templates. +prelink_cmds=$lt_prelink_cmds + +# Commands necessary for finishing linking programs. +postlink_cmds=$lt_postlink_cmds + +# Specify filename containing input files. +file_list_spec=$lt_file_list_spec + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action + +# ### END LIBTOOL CONFIG + +_LT_EOF + + cat <<'_LT_EOF' >> "$cfgfile" + +# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE + +# func_munge_path_list VARIABLE PATH +# ----------------------------------- +# VARIABLE is name of variable containing _space_ separated list of +# directories to be munged by the contents of PATH, which is string +# having a format: +# "DIR[:DIR]:" +# string "DIR[ DIR]" will be prepended to VARIABLE +# ":DIR[:DIR]" +# string "DIR[ DIR]" will be appended to VARIABLE +# "DIRP[:DIRP]::[DIRA:]DIRA" +# string "DIRP[ DIRP]" will be prepended to VARIABLE and string +# "DIRA[ DIRA]" will be appended to VARIABLE +# "DIR[:DIR]" +# VARIABLE will be replaced by "DIR[ DIR]" +func_munge_path_list () +{ + case x$2 in + x) + ;; + *:) + eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\" + ;; + x:*) + eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\" + ;; + *::*) + eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" + eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\" + ;; + *) + eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\" + ;; + esac +} + + +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +func_cc_basename () +{ + for cc_temp in $*""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac + done + func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +} + + +# ### END FUNCTIONS SHARED WITH CONFIGURE + +_LT_EOF + + case $host_os in + aix3*) + cat <<\_LT_EOF >> "$cfgfile" +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test set != "${COLLECT_NAMES+set}"; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +_LT_EOF + ;; + esac + + +ltmain=$ac_aux_dir/ltmain.sh + + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" + + ;; + "libpng-config":F) chmod +x libpng-config ;; + + esac +done # for ac_tag + + +as_fn_exit 0 +_ACEOF +ac_clean_files=$ac_clean_files_save + +test $ac_write_fail = 0 || + as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || as_fn_exit 1 +fi +if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 +$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} +fi + diff --git a/compat/libpng/configure.ac b/compat/libpng/configure.ac new file mode 100755 index 0000000..9584657 --- /dev/null +++ b/compat/libpng/configure.ac @@ -0,0 +1,324 @@ +# configure.ac + +dnl Process this file with autoconf to produce a configure script. +dnl +dnl Minor upgrades (compatible ABI): increment the package version +dnl (third field in two places below) and set the PNGLIB_RELEASE +dnl variable. +dnl +dnl Major upgrades (incompatible ABI): increment the package major +dnl version (second field, or first if desired), set the minor +dnl to 0, set PNGLIB_MAJOR below *and* follow the instructions in +dnl Makefile.am to upgrade the package name. + +dnl This is here to prevent earlier autoconf from being used, it +dnl should not be necessary to regenerate configure if the time +dnl stamps are correct +AC_PREREQ([2.68]) + +dnl Version number stuff here: + +AC_INIT([libpng],[1.6.21],[png-mng-implement@lists.sourceforge.net]) +AC_CONFIG_MACRO_DIR([scripts]) + +# libpng does not follow GNU file name conventions (hence 'foreign') +# color-tests requires automake 1.11 or later +# silent-rules requires automake 1.11 or later +# dist-xz requires automake 1.11 or later +# 1.12.2 fixes a security issue in 1.11.2 and 1.12.1 +# 1.13 is required for parallel tests +AM_INIT_AUTOMAKE([1.13 foreign dist-xz color-tests silent-rules subdir-objects]) +# The following line causes --disable-maintainer-mode to be the default to +# configure, this is necessary because libpng distributions cannot rely on the +# time stamps of the autotools generated files being correct +AM_MAINTAINER_MODE + +dnl configure.ac and Makefile.am expect automake 1.11.2 or a compatible later +dnl version; aclocal.m4 will generate a failure if you use a prior version of +dnl automake, so the following is not necessary (and is not defined anyway): +dnl AM_PREREQ([1.11.2]) +dnl stop configure from automagically running automake + +PNGLIB_VERSION=1.6.21 +PNGLIB_MAJOR=1 +PNGLIB_MINOR=6 +PNGLIB_RELEASE=21 + +dnl End of version number stuff + +AC_CONFIG_SRCDIR([pngget.c]) +AC_CONFIG_HEADERS([config.h]) + +# Checks for programs. +AC_LANG([C]) +AC_PROG_CC +AM_PROG_AS +LT_PATH_LD +AC_PROG_CPP +AC_PROG_AWK +AC_PROG_INSTALL +AC_PROG_LN_S +AC_PROG_MAKE_SET + +dnl libtool/libtoolize; version 2.4.2 is the tested version, this or any +dnl compatible later version may be used +LT_INIT([win32-dll]) +LT_PREREQ([2.4.2]) + +# Some awks crash when confronted with pnglibconf.dfa, do a test run now +# to make sure this doesn't happen +AC_MSG_CHECKING([that AWK works]) +if ${AWK} -f ${srcdir}/scripts/options.awk out="/dev/null" version=search\ + ${srcdir}/pngconf.h ${srcdir}/scripts/pnglibconf.dfa\ + ${srcdir}/pngusr.dfa 1>&2 +then + AC_MSG_RESULT([ok]) +else + AC_MSG_FAILURE([failed], 1) +fi + +# This is a remnant of the old cc -E validation, where it may have been +# necessary to use a different preprocessor for .dfn files +DFNCPP="$CPP" +AC_SUBST(DFNCPP) + +# -Werror cannot be passed to GCC in CFLAGS because configure will fail (it +# checks the compiler with a program that generates a warning), add the +# following option to deal with this +AC_ARG_VAR(PNG_COPTS, + [additional flags for the C compiler, use this for options that would] + [cause configure itself to fail]) +AC_ARG_ENABLE(werror, + AS_HELP_STRING([[[--enable-werror[=OPT]]]], + [Pass -Werror or the given argument to the compiler if it is supported]), + [test "$enable_werror" = "yes" && enable_werror="-Werror" + if test "$enable_werror" != "no"; then + sav_CFLAGS="$CFLAGS" + CFLAGS="$enable_werror $CFLAGS" + AC_MSG_CHECKING([if the compiler allows $enable_werror]) + AC_COMPILE_IFELSE( + [AC_LANG_SOURCE([ + [int main(int argc, char **argv){] + [return argv[argc-1][0];] + [}]])], + AC_MSG_RESULT(yes) + PNG_COPTS="$PNG_COPTS $enable_werror", + AC_MSG_RESULT(no)) + CFLAGS="$sav_CFLAGS" + fi],) + +# Checks for header files. +AC_HEADER_STDC + +# Checks for typedefs, structures, and compiler characteristics. +AC_C_CONST +AC_TYPE_SIZE_T +AC_STRUCT_TM +AC_C_RESTRICT + +# Checks for library functions. +AC_FUNC_STRTOD +AC_CHECK_FUNCS([memset], , AC_MSG_ERROR(memset not found in libc)) +AC_CHECK_FUNCS([pow], , AC_CHECK_LIB(m, pow, , AC_MSG_ERROR(cannot find pow)) ) +AC_ARG_WITH(zlib-prefix, + AS_HELP_STRING([[[--with-zlib-prefix]]], + [prefix that may have been used in installed zlib]), + [ZPREFIX=${withval}], + [ZPREFIX='z_']) +AC_CHECK_LIB(z, zlibVersion, , + AC_CHECK_LIB(z, ${ZPREFIX}zlibVersion, , AC_MSG_ERROR(zlib not installed))) + +# The following is for pngvalid, to ensure it catches FP errors even on +# platforms that don't enable FP exceptions, the function appears in the math +# library (typically), it's not an error if it is not found. +AC_CHECK_LIB([m], [feenableexcept]) +AC_CHECK_FUNCS([feenableexcept]) + +AC_MSG_CHECKING([if using Solaris linker]) +SLD=`$LD --version 2>&1 | grep Solaris` +if test "$SLD"; then + have_solaris_ld=yes + AC_MSG_RESULT(yes) +else + have_solaris_ld=no + AC_MSG_RESULT(no) +fi +AM_CONDITIONAL(HAVE_SOLARIS_LD, test "$have_solaris_ld" = "yes") + +AC_MSG_CHECKING([if libraries can be versioned]) +# Special case for PE/COFF platforms: ld reports +# support for version-script, but doesn't actually +# DO anything with it. +case $host in +*cygwin* | *mingw32* | *interix* ) + have_ld_version_script=no + AC_MSG_RESULT(no) +;; +* ) + +if test "$have_solaris_ld" = "yes"; then + GLD=`$LD --help < /dev/null 2>&1 | grep 'M mapfile'` +else + GLD=`$LD --help < /dev/null 2>/dev/null | grep version-script` +fi + +if test "$GLD"; then + have_ld_version_script=yes + AC_MSG_RESULT(yes) +else + have_ld_version_script=no + AC_MSG_RESULT(no) + AC_MSG_WARN(*** You have not enabled versioned symbols.) +fi +;; +esac + +AM_CONDITIONAL(HAVE_LD_VERSION_SCRIPT, test "$have_ld_version_script" = "yes") + +if test "$have_ld_version_script" = "yes"; then + AC_MSG_CHECKING([for symbol prefix]) + SYMBOL_PREFIX=`echo "PREFIX=__USER_LABEL_PREFIX__" \ + | ${CPP-${CC-gcc} -E} - 2>&1 \ + | ${EGREP-grep} "^PREFIX=" \ + | ${SED-sed} -e "s:^PREFIX=::" -e "s:__USER_LABEL_PREFIX__::"` + AC_SUBST(SYMBOL_PREFIX) + AC_MSG_RESULT($SYMBOL_PREFIX) +fi + +# Substitutions for .in files +AC_SUBST(PNGLIB_VERSION) +AC_SUBST(PNGLIB_MAJOR) +AC_SUBST(PNGLIB_MINOR) +AC_SUBST(PNGLIB_RELEASE) + +# Additional arguments (and substitutions) +# Allow the pkg-config directory to be set +AC_ARG_WITH(pkgconfigdir, + AS_HELP_STRING([[[--with-pkgconfigdir]]], + [Use the specified pkgconfig dir (default is libdir/pkgconfig)]), + [pkgconfigdir=${withval}], + [pkgconfigdir='${libdir}/pkgconfig']) + +AC_SUBST([pkgconfigdir]) +AC_MSG_NOTICE([[pkgconfig directory is ${pkgconfigdir}]]) + +# Make the *-config binary config scripts optional +AC_ARG_WITH(binconfigs, + AS_HELP_STRING([[[--with-binconfigs]]], + [Generate shell libpng-config scripts as well as pkg-config data] + [@<:@default=yes@:>@]), + [if test "${withval}" = no; then + binconfigs= + AC_MSG_NOTICE([[libpng-config scripts will not be built]]) + else + binconfigs='${binconfigs}' + fi], + [binconfigs='${binconfigs}']) +AC_SUBST([binconfigs]) + +# Support for prefixes to the API function names; this will generate defines +# at the start of the build to rename exported library functions +AC_ARG_WITH(libpng-prefix, + AS_HELP_STRING([[[--with-libpng-prefix]]], + [prefix libpng exported function (API) names with the given value]), + [if test "${withval:-no}" != "no"; then + AC_SUBST([PNG_PREFIX], [${withval}]) + fi]) +AM_CONDITIONAL([DO_PNG_PREFIX], [test "${with_libpng_prefix:-no}" != "no"]) + +# Control over what links are made for installed files. Versioned files are +# always installed, when the following options are turned on corresponding +# unversioned links are also created (normally as symbolic links): +AC_ARG_ENABLE([unversioned-links], + AS_HELP_STRING([[[--enable-unversioned-links]]], + [Installed libpng header files are placed in a versioned subdirectory] + [and installed libpng library (including DLL) files are versioned.] + [If this option is enabled unversioned links will be created pointing to] + [the corresponding installed files. If you use libpng.pc or] + [libpng-config for all builds you do not need these links, but if you] + [compile programs directly they will typically #include and] + [link with -lpng; in that case you need the links.] + [The links can be installed manually using 'make install-header-links'] + [and 'make install-library-links' and can be removed using the] + [corresponding uninstall- targets. If you do enable this option every] + [libpng 'make install' will recreate the links to point to the just] + [installed version of libpng. The default is to create the links;] + [use --disable-unversioned-links to change this])) + +# The AM_CONDITIONAL test is written so that the default is enabled; +# --disable-unversioned-links must be given to turn the option off. +AM_CONDITIONAL([DO_INSTALL_LINKS],[test "$enable_unversioned_links" != "no"]) + +AC_ARG_ENABLE([unversioned-libpng-pc], + AS_HELP_STRING([[[--enable-unversioned-libpng-pc]]], + [Install the configuration file 'libpng.pc' as a link to the versioned] + [version. This is done by default - use --disable-unversioned-libpng-pc] + [to change this.])) +AM_CONDITIONAL([DO_INSTALL_LIBPNG_PC], + [test "$enable_unversioned_libpng_pc" != "no"]) + +AC_ARG_ENABLE([unversioned-libpng-config], + AS_HELP_STRING([[[--enable-unversioned-libpng-config]]], + [Install the configuration file 'libpng-config' as a link to the] + [versioned version. This is done by default - use] + [--disable-unversioned-libpng-config to change this.])) +AM_CONDITIONAL([DO_INSTALL_LIBPNG_CONFIG], + [test "$enable_unversioned_libpng_config" != "no"]) + +# HOST SPECIFIC OPTIONS +# ===================== +# +# ARM +# === +# +# ARM NEON (SIMD) support. + +AC_ARG_ENABLE([arm-neon], + AS_HELP_STRING([[[--enable-arm-neon]]], + [Enable ARM NEON optimizations: =no/off, check, api, yes/on:] + [no/off: disable the optimizations; check: use internal checking code] + [(deprecated and poorly supported); api: disable by default, enable by] + [a call to png_set_option; yes/on: turn on unconditionally.] + [If not specified: determined by the compiler.]), + [case "$enableval" in + no|off) + # disable the default enabling on __ARM_NEON__ systems: + AC_DEFINE([PNG_ARM_NEON_OPT], [0], + [Disable ARM Neon optimizations]) + # Prevent inclusion of the assembler files below: + enable_arm_neon=no;; + check) + AC_DEFINE([PNG_ARM_NEON_CHECK_SUPPORTED], [], + [Check for ARM Neon support at run-time]);; + api) + AC_DEFINE([PNG_ARM_NEON_API_SUPPORTED], [], + [Turn on ARM Neon optimizations at run-time]);; + yes|on) + AC_DEFINE([PNG_ARM_NEON_OPT], [2], + [Enable ARM Neon optimizations]) + AC_MSG_WARN([--enable-arm-neon: please specify 'check' or 'api', if] + [you want the optimizations unconditionally pass -mfpu=neon] + [to the compiler.]);; + *) + AC_MSG_ERROR([--enable-arm-neon=${enable_arm_neon}: invalid value]) + esac]) + +# Add ARM specific files to all builds where the host_cpu is arm ('arm*') or +# where ARM optimizations were explicitly requested (this allows a fallback if a +# future host CPU does not match 'arm*') + +AM_CONDITIONAL([PNG_ARM_NEON], + [test "$enable_arm_neon" != 'no' && + case "$host_cpu" in + arm*|aarch64*) :;; + *) test "$enable_arm_neon" != '';; + esac]) + +AC_MSG_NOTICE([[Extra options for compiler: $PNG_COPTS]]) + +# Config files, substituting as above +AC_CONFIG_FILES([Makefile libpng.pc:libpng.pc.in]) +AC_CONFIG_FILES([libpng-config:libpng-config.in], + [chmod +x libpng-config]) + +AC_OUTPUT diff --git a/compat/libpng/contrib/README.txt b/compat/libpng/contrib/README.txt new file mode 100755 index 0000000..97963c6 --- /dev/null +++ b/compat/libpng/contrib/README.txt @@ -0,0 +1,5 @@ + +This "contrib" directory contains contributions which are not necessarily under +the libpng license, although all are open source. They are not part of +libpng proper and are not used for building the library, although some are used +for testing the library via "make check". diff --git a/compat/libpng/contrib/arm-neon/README b/compat/libpng/contrib/arm-neon/README new file mode 100755 index 0000000..b4248cf --- /dev/null +++ b/compat/libpng/contrib/arm-neon/README @@ -0,0 +1,83 @@ +OPERATING SYSTEM SPECIFIC ARM NEON DETECTION +-------------------------------------------- + +Detection of the ability to execute ARM NEON on an ARM processor requires +operating system support. (The information is not available in user mode.) + +HOW TO USE THIS +--------------- + +This directory contains C code fragments that can be included in arm/arm_init.c +by setting the macro PNG_ARM_NEON_FILE to the file name in "" or <> at build +time. This setting is not recorded in pnglibconf.h and can be changed simply by +rebuilding arm/arm_init.o with the required macro definition. + +For any of this code to be used the ARM NEON code must be enabled and run time +checks must be supported. I.e.: + +#if PNG_ARM_NEON_OPT > 0 +#ifdef PNG_ARM_NEON_CHECK_SUPPORTED + +This is done in a 'configure' build by passing configure the argument: + + --enable-arm-neon=check + +Apart from the basic Linux implementation in contrib/arm-neon/linux.c this code +is unsupported. That means that it is not even compiled on a regular basis and +may be broken in any given minor release. + +FILE FORMAT +----------- + +Each file documents its testing status as of the last time it was tested (which +may have been a long time ago): + +STATUS: one of: + SUPPORTED: This indicates that the file is included in the regularly + performed test builds and bugs are fixed when discovered. + COMPILED: This indicates that the code did compile at least once. See the + more detailed description for the extent to which the result was + successful. + TESTED: This means the code was fully compiled into the libpng test programs + and these were run at least once. + +BUG REPORTS: an email address to which to send reports of problems + +The file is a fragment of C code. It should not define any 'extern' symbols; +everything should be static. It must define the function: + +static int png_have_neon(png_structp png_ptr); + +That function must return 1 if ARM NEON instructions are supported, 0 if not. +It must not execute png_error unless it detects a bug. A png_error will prevent +the reading of the PNG and in the future, writing too. + +BUG REPORTS +----------- + +If you mail a bug report for any file that is not SUPPORTED there may only be +limited response. Consider fixing it and sending a patch to fix the problem - +this is more likely to result in action. + +CONTRIBUTIONS +------------- + +You may send contributions of new implementations to +png-mng-implement@sourceforge.net. Please write code in strict C90 C where +possible. Obviously OS dependencies are to be expected. If you submit code you +must have the authors permission and it must have a license that is acceptable +to the current maintainer; in particular that license must permit modification +and redistribution. + +Please try to make the contribution a single file and give the file a clear and +unambiguous name that identifies the target OS. If multiple files really are +required put them all in a sub-directory. + +You must also be prepared to handle bug reports from users of the code, either +by joining the png-mng-implement mailing list or by providing an email for the +"BUG REPORTS" entry or both. Please make sure that the header of the file +contains the STATUS and BUG REPORTS fields as above. + +Please list the OS requirements as precisely as possible. Ideally you should +also list the environment in which the code has been tested and certainly list +any environments where you suspect it might not work. diff --git a/compat/libpng/contrib/arm-neon/android-ndk.c b/compat/libpng/contrib/arm-neon/android-ndk.c new file mode 100755 index 0000000..7240123 --- /dev/null +++ b/compat/libpng/contrib/arm-neon/android-ndk.c @@ -0,0 +1,39 @@ +/* contrib/arm-neon/android-ndk.c + * + * Copyright (c) 2014 Glenn Randers-Pehrson + * Written by John Bowler, 2014. + * Last changed in libpng 1.6.10 [March 6, 2014] + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + * SEE contrib/arm-neon/README before reporting bugs + * + * STATUS: COMPILED, UNTESTED + * BUG REPORTS: png-mng-implement@sourceforge.net + * + * png_have_neon implemented for the Android NDK, see: + * + * Documentation: + * http://www.kandroid.org/ndk/docs/CPU-ARM-NEON.html + * http://code.google.com/p/android/issues/detail?id=49065 + * + * NOTE: this requires that libpng is built against the Android NDK and linked + * with an implementation of the Android ARM 'cpu-features' library. The code + * has been compiled only, not linked: no version of the library has been found, + * only the header files exist in the NDK. + */ +#include + +static int +png_have_neon(png_structp png_ptr) +{ + /* This is a whole lot easier than the linux code, however it is probably + * implemented as below, therefore it is better to cache the result (these + * function calls may be slow!) + */ + PNG_UNUSED(png_ptr) + return android_getCpuFamily() == ANDROID_CPU_FAMILY_ARM && + (android_getCpuFeatures() & ANDROID_CPU_ARM_FEATURE_NEON) != 0; +} diff --git a/compat/libpng/contrib/arm-neon/linux-auxv.c b/compat/libpng/contrib/arm-neon/linux-auxv.c new file mode 100755 index 0000000..4d26bd3 --- /dev/null +++ b/compat/libpng/contrib/arm-neon/linux-auxv.c @@ -0,0 +1,120 @@ +/* contrib/arm-neon/linux-auxv.c + * + * Copyright (c) 2014 Glenn Randers-Pehrson + * Written by Mans Rullgard, 2011. + * Last changed in libpng 1.6.10 [March 6, 2014] + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + * SEE contrib/arm-neon/README before reporting bugs + * + * STATUS: COMPILED, TESTED + * BUG REPORTS: png-mng-implement@sourceforge.net + * + * png_have_neon implemented for Linux versions which allow access to + * /proc/self/auxv. This is probably faster, cleaner and safer than the code to + * read /proc/cpuinfo in contrib/arm-neon/linux, however it is yet another piece + * of potentially untested code and has more complex dependencies than the code + * to read cpuinfo. + * + * This generic __linux__ implementation requires reading /proc/self/auxv and + * looking at each element for one that records NEON capabilities. + */ +#include /* for POSIX 1003.1 */ +#include /* for EINTR */ + +#include +#include +#include +#include +#include + +/* A read call may be interrupted, in which case it returns -1 and sets errno to + * EINTR if nothing was done, otherwise (if something was done) a partial read + * may result. + */ +static size_t +safe_read(png_structp png_ptr, int fd, void *buffer_in, size_t nbytes) +{ + size_t ntotal = 0; + char *buffer = png_voidcast(char*, buffer_in); + + while (nbytes > 0) + { + unsigned int nread; + int iread; + + /* Passing nread > INT_MAX to read is implementation defined in POSIX + * 1003.1, therefore despite the unsigned argument portable code must + * limit the value to INT_MAX! + */ + if (nbytes > INT_MAX) + nread = INT_MAX; + + else + nread = (unsigned int)/*SAFE*/nbytes; + + iread = read(fd, buffer, nread); + + if (iread == -1) + { + /* This is the devil in the details, a read can terminate early with 0 + * bytes read because of EINTR, yet it still returns -1 otherwise end + * of file cannot be distinguished. + */ + if (errno != EINTR) + { + png_warning(png_ptr, "/proc read failed"); + return 0; /* I.e., a permanent failure */ + } + } + + else if (iread < 0) + { + /* Not a valid 'read' result: */ + png_warning(png_ptr, "OS /proc read bug"); + return 0; + } + + else if (iread > 0) + { + /* Continue reading until a permanent failure, or EOF */ + buffer += iread; + nbytes -= (unsigned int)/*SAFE*/iread; + ntotal += (unsigned int)/*SAFE*/iread; + } + + else + return ntotal; + } + + return ntotal; /* nbytes == 0 */ +} + +static int +png_have_neon(png_structp png_ptr) +{ + int fd = open("/proc/self/auxv", O_RDONLY); + Elf32_auxv_t aux; + + /* Failsafe: failure to open means no NEON */ + if (fd == -1) + { + png_warning(png_ptr, "/proc/self/auxv open failed"); + return 0; + } + + while (safe_read(png_ptr, fd, &aux, sizeof aux) == sizeof aux) + { + if (aux.a_type == AT_HWCAP && (aux.a_un.a_val & HWCAP_NEON) != 0) + { + close(fd); + return 1; + } + } + + close(fd); + return 0; +} diff --git a/compat/libpng/contrib/arm-neon/linux.c b/compat/libpng/contrib/arm-neon/linux.c new file mode 100755 index 0000000..94f9bb1 --- /dev/null +++ b/compat/libpng/contrib/arm-neon/linux.c @@ -0,0 +1,161 @@ +/* contrib/arm-neon/linux.c + * + * Copyright (c) 2014 Glenn Randers-Pehrson + * Written by John Bowler, 2014. + * Last changed in libpng 1.6.16 [December 22, 2014] + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + * SEE contrib/arm-neon/README before reporting bugs + * + * STATUS: SUPPORTED + * BUG REPORTS: png-mng-implement@sourceforge.net + * + * png_have_neon implemented for Linux by reading the widely available + * pseudo-file /proc/cpuinfo. + * + * This code is strict ANSI-C and is probably moderately portable; it does + * however use and it assumes that /proc/cpuinfo is never localized. + */ +#include + +static int +png_have_neon(png_structp png_ptr) +{ + FILE *f = fopen("/proc/cpuinfo", "rb"); + + if (f != NULL) + { + /* This is a simple state machine which reads the input byte-by-byte until + * it gets a match on the 'neon' feature or reaches the end of the stream. + */ + static const char ch_feature[] = { 70, 69, 65, 84, 85, 82, 69, 83 }; + static const char ch_neon[] = { 78, 69, 79, 78 }; + + enum + { + StartLine, Feature, Colon, StartTag, Neon, HaveNeon, SkipTag, SkipLine + } state; + int counter; + + for (state=StartLine, counter=0;;) + { + int ch = fgetc(f); + + if (ch == EOF) + { + /* EOF means error or end-of-file, return false; neon at EOF is + * assumed to be a mistake. + */ + fclose(f); + return 0; + } + + switch (state) + { + case StartLine: + /* Match spaces at the start of line */ + if (ch <= 32) /* skip control characters and space */ + break; + + counter=0; + state = Feature; + /* FALL THROUGH */ + + case Feature: + /* Match 'FEATURE', ASCII case insensitive. */ + if ((ch & ~0x20) == ch_feature[counter]) + { + if (++counter == (sizeof ch_feature)) + state = Colon; + break; + } + + /* did not match 'feature' */ + state = SkipLine; + /* FALL THROUGH */ + + case SkipLine: + skipLine: + /* Skip everything until we see linefeed or carriage return */ + if (ch != 10 && ch != 13) + break; + + state = StartLine; + break; + + case Colon: + /* Match any number of space or tab followed by ':' */ + if (ch == 32 || ch == 9) + break; + + if (ch == 58) /* i.e. ':' */ + { + state = StartTag; + break; + } + + /* Either a bad line format or a 'feature' prefix followed by + * other characters. + */ + state = SkipLine; + goto skipLine; + + case StartTag: + /* Skip space characters before a tag */ + if (ch == 32 || ch == 9) + break; + + state = Neon; + counter = 0; + /* FALL THROUGH */ + + case Neon: + /* Look for 'neon' tag */ + if ((ch & ~0x20) == ch_neon[counter]) + { + if (++counter == (sizeof ch_neon)) + state = HaveNeon; + break; + } + + state = SkipTag; + /* FALL THROUGH */ + + case SkipTag: + /* Skip non-space characters */ + if (ch == 10 || ch == 13) + state = StartLine; + + else if (ch == 32 || ch == 9) + state = StartTag; + break; + + case HaveNeon: + /* Have seen a 'neon' prefix, but there must be a space or new + * line character to terminate it. + */ + if (ch == 10 || ch == 13 || ch == 32 || ch == 9) + { + fclose(f); + return 1; + } + + state = SkipTag; + break; + + default: + png_error(png_ptr, "png_have_neon: internal error (bug)"); + } + } + } + +#ifdef PNG_WARNINGS_SUPPORTED + else + png_warning(png_ptr, "/proc/cpuinfo open failed"); +#endif + + return 0; +} diff --git a/compat/libpng/contrib/conftest/README b/compat/libpng/contrib/conftest/README new file mode 100755 index 0000000..0f47279 --- /dev/null +++ b/compat/libpng/contrib/conftest/README @@ -0,0 +1,49 @@ +This directory contains test configuration files, currently always '.dfa' files +intended to be used in the build by setting the make macro DFA_XTRA to the name +of the file. + +These files are used in release validation of the 'configure' builds of libpng +by building 'make check', or 'make all-am' for cross-builds, with each .dfa +file. + +The files in this directory may change between minor releases, however +contributions describing specific builds of libpng are welcomed. There is no +guarantee that libpng will continue to build with such configurations; support +for given configurations can be, and has been, dropped between successive minor +releases. However if a .dfa file describing a configuration is not in this +directory it is very unlikely that it will be tested before a minor release! + +You can use these .dfa files as the basis of new configurations. Files in this +directory should not have any use restrictions or restrictive licenses. + +This directory is not included in the .zip and .7z distributions, which do +not contain 'configure' scripts. + +DOCUMENTATION +============= + +Examples: + ${srcdir}/pngusr.dfa + ${srcdir}/contrib/pngminim/*/pngusr.dfa + +Documentation of the options: + ${srcdir}/scripts/pnglibconf.dfa + +Documentation of the file format: + ${srcdir}/scripts/options.awk + +FILE NAMING +=========== + +File names in this directory may NOT contain any of the five characters: + + - , + * ? + +Neither may they contain any space character. + +While other characters may be used it is strongly suggested that file names be +limited to lower case Latiin alphabetic characters (a-z), digits (0-9) and, if +necessary the underscore (_) character. File names should be about 8 characters +long (excluding the .dfa extension). Submitted .dfa files should have names +between 7 and 16 characters long, shorter names (6 characters or less) are +reserved for standard tests. diff --git a/compat/libpng/contrib/conftest/read.dfa b/compat/libpng/contrib/conftest/read.dfa new file mode 100755 index 0000000..21e88d0 --- /dev/null +++ b/compat/libpng/contrib/conftest/read.dfa @@ -0,0 +1,58 @@ +# read.dfa +# Build time configuration of libpng +# +# Author: John Bowler +# Copyright: (c) John Bowler, 2013 +# Usage rights: +# To the extent possible under law, the author has waived all copyright and +# related or neighboring rights to this work. This work is published from: +# United States. +# +# Build libpng with basic read support. This enables the lowest level libpng +# read API - the one where the calling code has to use a loop to read each row. +# At present this is the API used by most programs. +# +# Support is enabled only for those chunks and transformations that are +# typically required - others can be added easily. +# + +everything = off + +# The sequential read code is enabled here; the progressive code can be used +# instead but there is no point enabling both. + +option SEQUENTIAL_READ on + +# Likewise it is pointless enabling both fixed and floating point APIs. Choose +# one or the other for both the API and the internal math. + +#Fixed point: +#option FIXED_POINT on +#option FLOATING_ARITHMETIC off + +#Floating point: +option FLOATING_POINT on +option FLOATING_ARITHMETIC on + +# Basic error handling, IO and user memory support. The latter allows the +# application program to provide its own implementations of 'malloc' and 'free'. +option SETJMP on +option STDIO on +option USER_MEM on + +# To read the full set of PNG images correctly interlace, transparency and +# 16-bit support is required. The application can implement interlace itself, +# but very few do and it's no longer possible to disable it when READ is +# enabled. +option READ_tRNS on +option READ_16BIT on + +# Everything else is application dependent. This file assumes the app handles +# all the native PNG bit layouts, so it doesn't need any of layout change +# transforms, but needs libpng to perform gamma correction. It doesn't do any +# colorspace stuff and ignores the 'significant bit' information. +# +# If your app always expands the image to a limited set of bit layouts you +# probably want to consider using the simplified API instead of the low level +# one - see png.h and s_read.dfa. +option READ_GAMMA on diff --git a/compat/libpng/contrib/conftest/s_read.dfa b/compat/libpng/contrib/conftest/s_read.dfa new file mode 100755 index 0000000..cb1ce0b --- /dev/null +++ b/compat/libpng/contrib/conftest/s_read.dfa @@ -0,0 +1,35 @@ +# s_read.dfa +# Build time configuration of libpng +# +# Author: John Bowler +# Copyright: (c) John Bowler, 2013 +# Usage rights: +# To the extent possible under law, the author has waived all copyright and +# related or neighboring rights to this work. This work is published from: +# United States. +# +# Build libpng with simplified read support (only). This builds a minimal +# libpng able to read all PNG formats and convert them into a small number of +# well understood memory formats. +# + +everything = off + +option SIMPLIFIED_READ on + +# It isn't necessary to chose fixed or floating point for the APIs because the +# simplified API doesn't need fixed or floating point numbers. It is necessary +# to chose an internal math implementation. The default (because of 'everything +# = off') is fixed point - turn the floating point implementation on if you have +# hardware floating point or prefer your software floating point implementation. +option FLOATING_ARITHMETIC on + +# This is not strictly necessary, but without it the message strings in the API +# will not be filled in +option ERROR_TEXT on + +# Switching these options on enables the 'AFIRST' and 'BGR' formats - you don't +# need this if you don't use them, they just allow the in-memory layout to be +# changed to match common hardware formats. +option SIMPLIFIED_READ_AFIRST on +option SIMPLIFIED_READ_BGR on diff --git a/compat/libpng/contrib/conftest/s_write.dfa b/compat/libpng/contrib/conftest/s_write.dfa new file mode 100755 index 0000000..e540a46 --- /dev/null +++ b/compat/libpng/contrib/conftest/s_write.dfa @@ -0,0 +1,33 @@ +# s_write.dfa +# Build time configuration of libpng +# +# Author: John Bowler +# Copyright: (c) John Bowler, 2013 +# Usage rights: +# To the extent possible under law, the author has waived all copyright and +# related or neighboring rights to this work. This work is published from: +# United States. +# +# Build libpng with (just) simplified write support +# + +everything = off + +option SIMPLIFIED_WRITE on + +# It isn't necessary to chose fixed or floating point for the APIs because the +# simplified API doesn't need fixed or floating point numbers. It is necessary +# to chose an internal math implementation. The default (because of 'everything +# = off') is fixed point - turn the floating point implementation on if you have +# hardware floating point or prefer your software floating point implementation. +option FLOATING_ARITHMETIC on + +# This is not strictly necessary, but without it the message strings in the API +# will not be filled in +option ERROR_TEXT on + +# Switching these options on enables the 'AFIRST' and 'BGR' formats - you don't +# need this if you don't use them, they just allow the in-memory layout to be +# changed to match common hardware formats. +option SIMPLIFIED_WRITE_AFIRST on +option SIMPLIFIED_WRITE_BGR on diff --git a/compat/libpng/contrib/conftest/simple.dfa b/compat/libpng/contrib/conftest/simple.dfa new file mode 100755 index 0000000..0419333 --- /dev/null +++ b/compat/libpng/contrib/conftest/simple.dfa @@ -0,0 +1,36 @@ +# simple.dfa +# Build time configuration of libpng +# +# Author: John Bowler +# Copyright: (c) John Bowler, 2013 +# Usage rights: +# To the extent possible under law, the author has waived all copyright and +# related or neighboring rights to this work. This work is published from: +# United States. +# +# Build libpng with just the simplified APIs (read and write). +# + +everything = off + +option SIMPLIFIED_WRITE on +option SIMPLIFIED_READ on + +# It isn't necessary to chose fixed or floating point for the APIs because the +# simplified API doesn't need fixed or floating point numbers. It is necessary +# to chose an internal math implementation. The default (because of 'everything +# = off') is fixed point - turn the floating point implementation on if you have +# hardware floating point or prefer your software floating point implementation. +option FLOATING_ARITHMETIC on + +# This is not strictly necessary, but without it the message strings in the API +# will not be filled in +option ERROR_TEXT on + +# Switching these options on enables the 'AFIRST' and 'BGR' formats - you don't +# need this if you don't use them, they just allow the in-memory layout to be +# changed to match common hardware formats. +option SIMPLIFIED_READ_AFIRST on +option SIMPLIFIED_READ_BGR on +option SIMPLIFIED_WRITE_AFIRST on +option SIMPLIFIED_WRITE_BGR on diff --git a/compat/libpng/contrib/conftest/write.dfa b/compat/libpng/contrib/conftest/write.dfa new file mode 100755 index 0000000..3319aab --- /dev/null +++ b/compat/libpng/contrib/conftest/write.dfa @@ -0,0 +1,45 @@ +# write.dfa +# Build time configuration of libpng +# +# Author: John Bowler +# Copyright: (c) John Bowler, 2013 +# Usage rights: +# To the extent possible under law, the author has waived all copyright and +# related or neighboring rights to this work. This work is published from: +# United States. +# +# Build libpng with no read support and minimal write support. +# + +everything = off + +# Switch on the write code - this makes a minimalist encoder + +option WRITE on + +# Choose fixed or floating point APIs and arithmetic. The choices are +# independent but normally they will match. It is typically better to use the +# floating point if you have floating point hardware. If you don't know, or +# (perhaps) to make libpng smaller used fixed point throughout. + +#Fixed point: +#option FIXED_POINT on +#option FLOATING_ARITHMETIC off + +#Floating point: +option FLOATING_POINT on +option FLOATING_ARITHMETIC on + +# Basic error handling, IO and user memory support. The latter allows the +# application program to provide its own implementations of 'malloc' and 'free'. +option SETJMP on +option STDIO on +option USER_MEM on + +# Everything else is optional. Unlike the read code in libpng the write code +# does not need to deal with arbitrary formats, so only add support for things +# you really do write! For example you might only write sRGB images, sometimes +# with transparency and never write 16 bit images, so: +option WRITE_sRGB on +option WRITE_tRNS on +#option WRITE_16BIT off (this is the default with 'everything = off') diff --git a/compat/libpng/contrib/examples/README.txt b/compat/libpng/contrib/examples/README.txt new file mode 100755 index 0000000..0525c9d --- /dev/null +++ b/compat/libpng/contrib/examples/README.txt @@ -0,0 +1,24 @@ + +This directory (contrib/examples) contains examples of libpng usage. + +NO COPYRIGHT RIGHTS ARE CLAIMED TO ANY OF THE FILES IN THIS DIRECTORY. + +To the extent possible under law, the authors have waived all copyright and +related or neighboring rights to this work. This work is published from: +United States. + +The files may be used freely in any way. The intention is that appropriate +parts of the files be used in other libpng-using programs without any need for +the authors of the using code to seek copyright or license from the original +authors. + +The source code and comments in this directory are the original work of the +people named below. No other person or organization has made contributions to +the work in this directory. + +ORIGINAL AUTHORS + The following people have contributed to the code in this directory. None + of the people below claim any rights with regard to the contents of this + directory. + + John Bowler diff --git a/compat/libpng/contrib/examples/iccfrompng.c b/compat/libpng/contrib/examples/iccfrompng.c new file mode 100755 index 0000000..603037e --- /dev/null +++ b/compat/libpng/contrib/examples/iccfrompng.c @@ -0,0 +1,185 @@ +/*- iccfrompng + * + * COPYRIGHT: Written by John Cunningham Bowler, 2011. + * To the extent possible under law, the author has waived all copyright and + * related or neighboring rights to this work. This work is published from: + * United States. + * + * Extract any icc profiles found in the given PNG files. This is a simple + * example of a program that extracts information from the header of a PNG file + * without processing the image. Notice that some header information may occur + * after the image data. Textual data and comments are an example; the approach + * in this file won't work reliably for such data because it only looks for the + * information in the section of the file that preceeds the image data. + * + * Compile and link against libpng and zlib, plus anything else required on the + * system you use. + * + * To use supply a list of PNG files containing iCCP chunks, the chunks will be + * extracted to a similarly named file with the extension replaced by 'icc', + * which will be overwritten without warning. + */ +#include +#include +#include +#include + +#include + +#if defined(PNG_READ_SUPPORTED) && defined(PNG_STDIO_SUPPORTED) && \ + defined (PNG_iCCP_SUPPORTED) + + +static int verbose = 1; +static png_byte no_profile[] = "no profile"; + +static png_bytep +extract(FILE *fp, png_uint_32 *proflen) +{ + png_structp png_ptr = png_create_read_struct(PNG_LIBPNG_VER_STRING,0,0,0); + png_infop info_ptr = NULL; + png_bytep result = NULL; + + /* Initialize for error or no profile: */ + *proflen = 0; + + if (png_ptr == NULL) + { + fprintf(stderr, "iccfrompng: version library mismatch?\n"); + return 0; + } + + if (setjmp(png_jmpbuf(png_ptr))) + { + png_destroy_read_struct(&png_ptr, &info_ptr, NULL); + return 0; + } + + png_init_io(png_ptr, fp); + + info_ptr = png_create_info_struct(png_ptr); + if (info_ptr == NULL) + png_error(png_ptr, "OOM allocating info structure"); + + png_read_info(png_ptr, info_ptr); + + { + png_charp name; + int compression_type; + png_bytep profile; + + if (png_get_iCCP(png_ptr, info_ptr, &name, &compression_type, &profile, + proflen) & PNG_INFO_iCCP) + { + result = malloc(*proflen); + if (result != NULL) + memcpy(result, profile, *proflen); + + else + png_error(png_ptr, "OOM allocating profile buffer"); + } + + else + result = no_profile; + } + + png_destroy_read_struct(&png_ptr, &info_ptr, NULL); + return result; +} + +static int +extract_one_file(const char *filename) +{ + int result = 0; + FILE *fp = fopen(filename, "rb"); + + if (fp != NULL) + { + png_uint_32 proflen = 0; + png_bytep profile = extract(fp, &proflen); + + if (profile != NULL && profile != no_profile) + { + size_t len; + char *output; + + { + const char *ep = strrchr(filename, '.'); + + if (ep != NULL) + len = ep-filename; + + else + len = strlen(filename); + } + + output = malloc(len + 5); + if (output != NULL) + { + FILE *of; + + memcpy(output, filename, len); + strcpy(output+len, ".icc"); + + of = fopen(output, "wb"); + if (of != NULL) + { + if (fwrite(profile, proflen, 1, of) == 1 && + fflush(of) == 0 && + fclose(of) == 0) + { + if (verbose) + printf("%s -> %s\n", filename, output); + /* Success return */ + result = 1; + } + + else + { + fprintf(stderr, "%s: error writing profile\n", output); + if (remove(output)) + fprintf(stderr, "%s: could not remove file\n", output); + } + } + + else + fprintf(stderr, "%s: failed to open output file\n", output); + + free(output); + } + + else + fprintf(stderr, "%s: OOM allocating string!\n", filename); + + free(profile); + } + + else if (verbose && profile == no_profile) + printf("%s has no profile\n", filename); + } + + else + fprintf(stderr, "%s: could not open file\n", filename); + + return result; +} + +int +main(int argc, char **argv) +{ + int i; + int extracted = 0; + + for (i=1; i +#include +#include /* required for error handling */ + +/* Normally use here to get the installed libpng, but this is done to + * ensure the code picks up the local libpng implementation: + */ +#include "../../png.h" + +#if defined(PNG_READ_SUPPORTED) && defined(PNG_SEQUENTIAL_READ_SUPPORTED) + +/* Return component 'c' of pixel 'x' from the given row. */ +static unsigned int +component(png_const_bytep row, png_uint_32 x, unsigned int c, + unsigned int bit_depth, unsigned int channels) +{ + /* PNG images can be up to 2^31 pixels wide, but this means they can be up to + * 2^37 bits wide (for a 64-bit pixel - the largest possible) and hence 2^34 + * bytes wide. Since the row fitted into memory, however, the following must + * work: + */ + png_uint_32 bit_offset_hi = bit_depth * ((x >> 6) * channels); + png_uint_32 bit_offset_lo = bit_depth * ((x & 0x3f) * channels + c); + + row = (png_const_bytep)(((PNG_CONST png_byte (*)[8])row) + bit_offset_hi); + row += bit_offset_lo >> 3; + bit_offset_lo &= 0x07; + + /* PNG pixels are packed into bytes to put the first pixel in the highest + * bits of the byte and into two bytes for 16-bit values with the high 8 bits + * first, so: + */ + switch (bit_depth) + { + case 1: return (row[0] >> (7-bit_offset_lo)) & 0x01; + case 2: return (row[0] >> (6-bit_offset_lo)) & 0x03; + case 4: return (row[0] >> (4-bit_offset_lo)) & 0x0f; + case 8: return row[0]; + case 16: return (row[0] << 8) + row[1]; + default: + /* This should never happen; it indicates a bug in this program or in + * libpng itself: + */ + fprintf(stderr, "pngpixel: invalid bit depth %u\n", bit_depth); + exit(1); + } +} + +/* Print a pixel from a row returned by libpng; determine the row format, find + * the pixel, and print the relevant information to stdout. + */ +static void +print_pixel(png_structp png_ptr, png_infop info_ptr, png_const_bytep row, + png_uint_32 x) +{ + PNG_CONST unsigned int bit_depth = png_get_bit_depth(png_ptr, info_ptr); + + switch (png_get_color_type(png_ptr, info_ptr)) + { + case PNG_COLOR_TYPE_GRAY: + printf("GRAY %u\n", component(row, x, 0, bit_depth, 1)); + return; + + /* The palette case is slightly more difficult - the palette and, if + * present, the tRNS ('transparency', though the values are really + * opacity) data must be read to give the full picture: + */ + case PNG_COLOR_TYPE_PALETTE: + { + PNG_CONST int index = component(row, x, 0, bit_depth, 1); + png_colorp palette = NULL; + int num_palette = 0; + + if ((png_get_PLTE(png_ptr, info_ptr, &palette, &num_palette) & + PNG_INFO_PLTE) && num_palette > 0 && palette != NULL) + { + png_bytep trans_alpha = NULL; + int num_trans = 0; + if ((png_get_tRNS(png_ptr, info_ptr, &trans_alpha, &num_trans, + NULL) & PNG_INFO_tRNS) && num_trans > 0 && + trans_alpha != NULL) + printf("INDEXED %u = %d %d %d %d\n", index, + palette[index].red, palette[index].green, + palette[index].blue, + index < num_trans ? trans_alpha[index] : 255); + + else /* no transparency */ + printf("INDEXED %u = %d %d %d\n", index, + palette[index].red, palette[index].green, + palette[index].blue); + } + + else + printf("INDEXED %u = invalid index\n", index); + } + return; + + case PNG_COLOR_TYPE_RGB: + printf("RGB %u %u %u\n", component(row, x, 0, bit_depth, 3), + component(row, x, 1, bit_depth, 3), + component(row, x, 2, bit_depth, 3)); + return; + + case PNG_COLOR_TYPE_GRAY_ALPHA: + printf("GRAY+ALPHA %u %u\n", component(row, x, 0, bit_depth, 2), + component(row, x, 1, bit_depth, 2)); + return; + + case PNG_COLOR_TYPE_RGB_ALPHA: + printf("RGBA %u %u %u %u\n", component(row, x, 0, bit_depth, 4), + component(row, x, 1, bit_depth, 4), + component(row, x, 2, bit_depth, 4), + component(row, x, 3, bit_depth, 4)); + return; + + default: + png_error(png_ptr, "pngpixel: invalid color type"); + } +} + +int main(int argc, const char **argv) +{ + /* This program uses the default, based, libpng error handling + * mechanism, therefore any local variable that exists before the call to + * setjmp and is changed after the call to setjmp returns successfully must + * be declared with 'volatile' to ensure that their values don't get + * destroyed by longjmp: + */ + volatile int result = 1/*fail*/; + + if (argc == 4) + { + long x = atol(argv[1]); + long y = atol(argv[2]); + FILE *f = fopen(argv[3], "rb"); + volatile png_bytep row = NULL; + + if (f != NULL) + { + /* libpng requires a callback function for handling errors; this + * callback must not return. The default callback function uses a + * stored style jmp_buf which is held in a png_struct and + * writes error messages to stderr. Creating the png_struct is a + * little tricky; just copy the following code. + */ + png_structp png_ptr = png_create_read_struct(PNG_LIBPNG_VER_STRING, + NULL, NULL, NULL); + + if (png_ptr != NULL) + { + png_infop info_ptr = png_create_info_struct(png_ptr); + + if (info_ptr != NULL) + { + /* Declare stack variables to hold pointers to locally allocated + * data. + */ + + /* Initialize the error control buffer: */ + if (setjmp(png_jmpbuf(png_ptr)) == 0) + { + png_uint_32 width, height; + int bit_depth, color_type, interlace_method, + compression_method, filter_method; + png_bytep row_tmp; + + /* Now associate the recently opened (FILE*) with the default + * libpng initialization functions. Sometimes libpng is + * compiled without stdio support (it can be difficult to do + * in some environments); in that case you will have to write + * your own read callback to read data from the (FILE*). + */ + png_init_io(png_ptr, f); + + /* And read the first part of the PNG file - the header and + * all the information up to the first pixel. + */ + png_read_info(png_ptr, info_ptr); + + /* This fills in enough information to tell us the width of + * each row in bytes, allocate the appropriate amount of + * space. In this case png_malloc is used - it will not + * return if memory isn't available. + */ + row = png_malloc(png_ptr, png_get_rowbytes(png_ptr, + info_ptr)); + + /* To avoid the overhead of using a volatile auto copy row_tmp + * to a local here - just use row for the png_free below. + */ + row_tmp = row; + + /* All the information we need is in the header is returned by + * png_get_IHDR, if this fails we can now use 'png_error' to + * signal the error and return control to the setjmp above. + */ + if (png_get_IHDR(png_ptr, info_ptr, &width, &height, + &bit_depth, &color_type, &interlace_method, + &compression_method, &filter_method)) + { + int passes, pass; + + /* png_set_interlace_handling returns the number of + * passes required as well as turning on libpng's + * handling, but since we do it ourselves this is + * necessary: + */ + switch (interlace_method) + { + case PNG_INTERLACE_NONE: + passes = 1; + break; + + case PNG_INTERLACE_ADAM7: + passes = PNG_INTERLACE_ADAM7_PASSES; + break; + + default: + png_error(png_ptr, "pngpixel: unknown interlace"); + } + + /* Now read the pixels, pass-by-pass, row-by-row: */ + png_start_read_image(png_ptr); + + for (pass=0; pass +#include +#include +#include + +/* Normally use here to get the installed libpng, but this is done to + * ensure the code picks up the local libpng implementation: + */ +#include "../../png.h" +#if defined(PNG_SIMPLIFIED_READ_SUPPORTED) && \ + defined(PNG_SIMPLIFIED_WRITE_SUPPORTED) + +int main(int argc, const char **argv) +{ + int result = 1; + + if (argc == 3) + { + png_image image; + + /* Only the image structure version number needs to be set. */ + memset(&image, 0, sizeof image); + image.version = PNG_IMAGE_VERSION; + + if (png_image_begin_read_from_file(&image, argv[1])) + { + png_bytep buffer; + + /* Change this to try different formats! If you set a colormap format + * then you must also supply a colormap below. + */ + image.format = PNG_FORMAT_RGBA; + + buffer = malloc(PNG_IMAGE_SIZE(image)); + + if (buffer != NULL) + { + if (png_image_finish_read(&image, NULL/*background*/, buffer, + 0/*row_stride*/, NULL/*colormap for PNG_FORMAT_FLAG_COLORMAP */)) + { + if (png_image_write_to_file(&image, argv[2], + 0/*convert_to_8bit*/, buffer, 0/*row_stride*/, + NULL/*colormap*/)) + result = 0; + + else + fprintf(stderr, "pngtopng: write %s: %s\n", argv[2], + image.message); + + free(buffer); + } + + else + { + fprintf(stderr, "pngtopng: read %s: %s\n", argv[1], + image.message); + + /* This is the only place where a 'free' is required; libpng does + * the cleanup on error and success, but in this case we couldn't + * complete the read because of running out of memory. + */ + png_image_free(&image); + } + } + + else + fprintf(stderr, "pngtopng: out of memory: %lu bytes\n", + (unsigned long)PNG_IMAGE_SIZE(image)); + } + + else + /* Failed to read the first argument: */ + fprintf(stderr, "pngtopng: %s: %s\n", argv[1], image.message); + } + + else + /* Wrong number of arguments */ + fprintf(stderr, "pngtopng: usage: pngtopng input-file output-file\n"); + + return result; +} +#endif /* READ && WRITE */ diff --git a/compat/libpng/contrib/examples/simpleover.c b/compat/libpng/contrib/examples/simpleover.c new file mode 100755 index 0000000..59dd313 --- /dev/null +++ b/compat/libpng/contrib/examples/simpleover.c @@ -0,0 +1,648 @@ +/*- simpleover + * + * COPYRIGHT: Written by John Cunningham Bowler, 2015. + * To the extent possible under law, the author has waived all copyright and + * related or neighboring rights to this work. This work is published from: + * United States. + * + * Read several PNG files, which should have an alpha channel or transparency + * information, and composite them together to produce one or more 16-bit linear + * RGBA intermediates. This involves doing the correct 'over' composition to + * combine the alpha channels and corresponding data. + * + * Finally read an output (background) PNG using the 24-bit RGB format (the + * PNG will be composited on green (#00ff00) by default if it has an alpha + * channel), and apply the intermediate image generated above to specified + * locations in the image. + * + * The command line has the general format: + * + * simpleover [output.png] + * {--sprite=width,height,name {[--at=x,y] {sprite.png}}} + * {--add=name {x,y}} + * + * The --sprite and --add options may occur multiple times. They are executed + * in order. --add may refer to any sprite already read. + * + * This code is intended to show how to composite multiple images together + * correctly. Apart from the libpng Simplified API the only work done in here + * is to combine multiple input PNG images into a single sprite; this involves + * a Porter-Duff 'over' operation and the input PNG images may, as a result, + * be regarded as being layered one on top of the other with the first (leftmost + * on the command line) being at the bottom and the last on the top. + */ +#include +#include +#include +#include +#include + +/* Normally use here to get the installed libpng, but this is done to + * ensure the code picks up the local libpng implementation, so long as this + * file is linked against a sufficiently recent libpng (1.6+) it is ok to + * change this to : + */ +#include "../../png.h" + +#ifdef PNG_SIMPLIFIED_READ_SUPPORTED + +#define sprite_name_chars 15 +struct sprite { + FILE *file; + png_uint_16p buffer; + unsigned int width; + unsigned int height; + char name[sprite_name_chars+1]; +}; + +#if 0 /* div by 65535 test program */ +#include +#include + +int main(void) { + double err = 0; + unsigned int xerr = 0; + unsigned int r = 32769; + { + unsigned int x = 0; + + do { + unsigned int t = x + (x >> 16) /*+ (x >> 31)*/ + r; + double v = x, errtest; + + if (t < x) { + fprintf(stderr, "overflow: %u+%u -> %u\n", x, r, t); + return 1; + } + + v /= 65535; + errtest = v; + t >>= 16; + errtest -= t; + + if (errtest > err) { + err = errtest; + xerr = x; + + if (errtest >= .5) { + fprintf(stderr, "error: %u/65535 = %f, not %u, error %f\n", + x, v, t, errtest); + return 0; + } + } + } while (++x <= 65535U*65535U); + } + + printf("error %f @ %u\n", err, xerr); + + return 0; +} +#endif /* div by 65535 test program */ + +static void +sprite_op(const struct sprite *sprite, int x_offset, int y_offset, + png_imagep image, const png_uint_16 *buffer) +{ + /* This is where the Porter-Duff 'Over' operator is evaluated; change this + * code to change the operator (this could be parameterized). Any other + * image processing operation could be used here. + */ + + + /* Check for an x or y offset that pushes any part of the image beyond the + * right or bottom of the sprite: + */ + if ((y_offset < 0 || (unsigned)/*SAFE*/y_offset < sprite->height) && + (x_offset < 0 || (unsigned)/*SAFE*/x_offset < sprite->width)) + { + unsigned int y = 0; + + if (y_offset < 0) + y = -y_offset; /* Skip to first visible row */ + + do + { + unsigned int x = 0; + + if (x_offset < 0) + x = -x_offset; + + do + { + /* In and out are RGBA values, so: */ + const png_uint_16 *in_pixel = buffer + (y * image->width + x)*4; + png_uint_32 in_alpha = in_pixel[3]; + + /* This is the optimized Porter-Duff 'Over' operation, when the + * input alpha is 0 the output is not changed. + */ + if (in_alpha > 0) + { + png_uint_16 *out_pixel = sprite->buffer + + ((y+y_offset) * sprite->width + (x+x_offset))*4; + + /* This is the weight to apply to the output: */ + in_alpha = 65535-in_alpha; + + if (in_alpha > 0) + { + /* The input must be composed onto the output. This means + * multiplying the current output pixel value by the inverse + * of the input alpha (1-alpha). A division is required but + * it is by the constant 65535. Approximate this as: + * + * (x + (x >> 16) + 32769) >> 16; + * + * This is exact (and does not overflow) for all values of + * x in the range 0..65535*65535. (Note that the calculation + * produces the closest integer; the maximum error is <0.5). + */ + png_uint_32 tmp; + +# define compose(c)\ + tmp = out_pixel[c] * in_alpha;\ + tmp = (tmp + (tmp >> 16) + 32769) >> 16;\ + out_pixel[c] = tmp + in_pixel[c] + + /* The following is very vectorizable... */ + compose(0); + compose(1); + compose(2); + compose(3); + } + + else + out_pixel[0] = in_pixel[0], + out_pixel[1] = in_pixel[1], + out_pixel[2] = in_pixel[2], + out_pixel[3] = in_pixel[3]; + } + } + while (++x < image->width); + } + while (++y < image->height); + } +} + +static int +create_sprite(struct sprite *sprite, int *argc, const char ***argv) +{ + /* Read the arguments and create this sprite. The sprite buffer has already + * been allocated. This reads the input PNGs one by one in linear format, + * composes them onto the sprite buffer (the code in the function above) + * then saves the result, converting it on the fly to PNG RGBA 8-bit format. + */ + while (*argc > 0) + { + char tombstone; + int x = 0, y = 0; + + if ((*argv)[0][0] == '-' && (*argv)[0][1] == '-') + { + /* The only supported option is --at. */ + if (sscanf((*argv)[0], "--at=%d,%d%c", &x, &y, &tombstone) != 2) + break; /* success; caller will parse this option */ + + ++*argv, --*argc; + } + + else + { + /* The argument has to be a file name */ + png_image image; + + image.version = PNG_IMAGE_VERSION; + image.opaque = NULL; + + if (png_image_begin_read_from_file(&image, (*argv)[0])) + { + png_uint_16p buffer; + + image.format = PNG_FORMAT_LINEAR_RGB_ALPHA; + + buffer = malloc(PNG_IMAGE_SIZE(image)); + + if (buffer != NULL) + { + if (png_image_finish_read(&image, NULL/*background*/, buffer, + 0/*row_stride*/, + NULL/*colormap for PNG_FORMAT_FLAG_COLORMAP*/)) + { + /* This is the place where the Porter-Duff 'Over' operator + * needs to be done by this code. In fact, any image + * processing required can be done here; the data is in + * the correct format (linear, 16-bit) and source and + * destination are in memory. + */ + sprite_op(sprite, x, y, &image, buffer); + free(buffer); + ++*argv, --*argc; + /* And continue to the next argument */ + continue; + } + + else + { + free(buffer); + fprintf(stderr, "simpleover: read %s: %s\n", (*argv)[0], + image.message); + } + } + + else + { + fprintf(stderr, "simpleover: out of memory: %lu bytes\n", + (unsigned long)PNG_IMAGE_SIZE(image)); + + /* png_image_free must be called if we abort the Simplified API + * read because of a problem detected in this code. If problems + * are detected in the Simplified API it cleans up itself. + */ + png_image_free(&image); + } + } + + else + { + /* Failed to read the first argument: */ + fprintf(stderr, "simpleover: %s: %s\n", (*argv)[0], image.message); + } + + return 0; /* failure */ + } + } + + /* All the sprite operations have completed successfully. Save the RGBA + * buffer as a PNG using the simplified write API. + */ + sprite->file = tmpfile(); + + if (sprite->file != NULL) + { + png_image save; + + memset(&save, 0, sizeof save); + save.version = PNG_IMAGE_VERSION; + save.opaque = NULL; + save.width = sprite->width; + save.height = sprite->height; + save.format = PNG_FORMAT_LINEAR_RGB_ALPHA; + save.flags = PNG_IMAGE_FLAG_FAST; + save.colormap_entries = 0; + + if (png_image_write_to_stdio(&save, sprite->file, 1/*convert_to_8_bit*/, + sprite->buffer, 0/*row_stride*/, NULL/*colormap*/)) + { + /* Success; the buffer is no longer needed: */ + free(sprite->buffer); + sprite->buffer = NULL; + return 1; /* ok */ + } + + else + fprintf(stderr, "simpleover: write sprite %s: %s\n", sprite->name, + save.message); + } + + else + fprintf(stderr, "simpleover: sprite %s: could not allocate tmpfile: %s\n", + sprite->name, strerror(errno)); + + return 0; /* fail */ +} + +static int +add_sprite(png_imagep output, png_bytep out_buf, struct sprite *sprite, + int *argc, const char ***argv) +{ + /* Given a --add argument naming this sprite, perform the operations listed + * in the following arguments. The arguments are expected to have the form + * (x,y), which is just an offset at which to add the sprite to the + * output. + */ + while (*argc > 0) + { + char tombstone; + int x, y; + + if ((*argv)[0][0] == '-' && (*argv)[0][1] == '-') + return 1; /* success */ + + if (sscanf((*argv)[0], "%d,%d%c", &x, &y, &tombstone) == 2) + { + /* Now add the new image into the sprite data, but only if it + * will fit. + */ + if (x < 0 || y < 0 || + (unsigned)/*SAFE*/x >= output->width || + (unsigned)/*SAFE*/y >= output->height || + sprite->width > output->width-x || + sprite->height > output->height-y) + { + fprintf(stderr, "simpleover: sprite %s @ (%d,%d) outside image\n", + sprite->name, x, y); + /* Could just skip this, but for the moment it is an error */ + return 0; /* error */ + } + + else + { + /* Since we know the sprite fits we can just read it into the + * output using the simplified API. + */ + png_image in; + + in.version = PNG_IMAGE_VERSION; + rewind(sprite->file); + + if (png_image_begin_read_from_stdio(&in, sprite->file)) + { + in.format = PNG_FORMAT_RGB; /* force compose */ + + if (png_image_finish_read(&in, NULL/*background*/, + out_buf + (y*output->width + x)*3/*RGB*/, + output->width*3/*row_stride*/, + NULL/*colormap for PNG_FORMAT_FLAG_COLORMAP*/)) + { + ++*argv, --*argc; + continue; + } + } + + /* The read failed: */ + fprintf(stderr, "simpleover: add sprite %s: %s\n", sprite->name, + in.message); + return 0; /* error */ + } + } + + else + { + fprintf(stderr, "simpleover: --add='%s': invalid position %s\n", + sprite->name, (*argv)[0]); + return 0; /* error */ + } + } + + return 1; /* ok */ +} + +static int +simpleover_process(png_imagep output, png_bytep out_buf, int argc, + const char **argv) +{ + int result = 1; /* success */ +# define csprites 10/*limit*/ +# define str(a) #a + int nsprites = 0; + struct sprite sprites[csprites]; + + while (argc > 0) + { + result = 0; /* fail */ + + if (strncmp(argv[0], "--sprite=", 9) == 0) + { + char tombstone; + + if (nsprites < csprites) + { + int n; + + sprites[nsprites].width = sprites[nsprites].height = 0; + sprites[nsprites].name[0] = 0; + + n = sscanf(argv[0], "--sprite=%u,%u,%" str(sprite_name_chars) "s%c", + &sprites[nsprites].width, &sprites[nsprites].height, + sprites[nsprites].name, &tombstone); + + if ((n == 2 || n == 3) && + sprites[nsprites].width > 0 && sprites[nsprites].height > 0) + { + size_t buf_size, tmp; + + /* Default a name if not given. */ + if (sprites[nsprites].name[0] == 0) + sprintf(sprites[nsprites].name, "sprite-%d", nsprites+1); + + /* Allocate a buffer for the sprite and calculate the buffer + * size: + */ + buf_size = sizeof (png_uint_16 [4]); + buf_size *= sprites[nsprites].width; + buf_size *= sprites[nsprites].height; + + /* This can overflow a (size_t); check for this: */ + tmp = buf_size; + tmp /= sprites[nsprites].width; + tmp /= sprites[nsprites].height; + + if (tmp == sizeof (png_uint_16 [4])) + { + sprites[nsprites].buffer = malloc(buf_size); + /* This buffer must be initialized to transparent: */ + memset(sprites[nsprites].buffer, 0, buf_size); + + if (sprites[nsprites].buffer != NULL) + { + sprites[nsprites].file = NULL; + ++argv, --argc; + + if (create_sprite(sprites+nsprites++, &argc, &argv)) + { + result = 1; /* still ok */ + continue; + } + + break; /* error */ + } + } + + /* Overflow, or OOM */ + fprintf(stderr, "simpleover: %s: sprite too large\n", argv[0]); + break; + } + + else + { + fprintf(stderr, "simpleover: %s: invalid sprite (%u,%u)\n", + argv[0], sprites[nsprites].width, sprites[nsprites].height); + break; + } + } + + else + { + fprintf(stderr, "simpleover: %s: too many sprites\n", argv[0]); + break; + } + } + + else if (strncmp(argv[0], "--add=", 6) == 0) + { + const char *name = argv[0]+6; + int isprite = nsprites; + + ++argv, --argc; + + while (--isprite >= 0) + { + if (strcmp(sprites[isprite].name, name) == 0) + { + if (!add_sprite(output, out_buf, sprites+isprite, &argc, &argv)) + goto out; /* error in add_sprite */ + + break; + } + } + + if (isprite < 0) /* sprite not found */ + { + fprintf(stderr, "simpleover: --add='%s': sprite not found\n", name); + break; + } + } + + else + { + fprintf(stderr, "simpleover: %s: unrecognized operation\n", argv[0]); + break; + } + + result = 1; /* ok */ + } + + /* Clean up the cache of sprites: */ +out: + while (--nsprites >= 0) + { + if (sprites[nsprites].buffer != NULL) + free(sprites[nsprites].buffer); + + if (sprites[nsprites].file != NULL) + (void)fclose(sprites[nsprites].file); + } + + return result; +} + +int main(int argc, const char **argv) +{ + int result = 1; /* default to fail */ + + if (argc >= 2) + { + int argi = 2; + const char *output = NULL; + png_image image; + + if (argc > 2 && argv[2][0] != '-'/*an operation*/) + { + output = argv[2]; + argi = 3; + } + + image.version = PNG_IMAGE_VERSION; + image.opaque = NULL; + + if (png_image_begin_read_from_file(&image, argv[1])) + { + png_bytep buffer; + + image.format = PNG_FORMAT_RGB; /* 24-bit RGB */ + + buffer = malloc(PNG_IMAGE_SIZE(image)); + + if (buffer != NULL) + { + png_color background = {0, 0xff, 0}; /* fully saturated green */ + + if (png_image_finish_read(&image, &background, buffer, + 0/*row_stride*/, NULL/*colormap for PNG_FORMAT_FLAG_COLORMAP */)) + { + /* At this point png_image_finish_read has cleaned up the + * allocated data in png_image, and only the buffer needs to be + * freed. + * + * Perform the remaining operations: + */ + if (simpleover_process(&image, buffer, argc-argi, argv+argi)) + { + /* Write the output: */ + if ((output != NULL && + png_image_write_to_file(&image, output, + 0/*convert_to_8bit*/, buffer, 0/*row_stride*/, + NULL/*colormap*/)) || + (output == NULL && + png_image_write_to_stdio(&image, stdout, + 0/*convert_to_8bit*/, buffer, 0/*row_stride*/, + NULL/*colormap*/))) + result = 0; + + else + fprintf(stderr, "simpleover: write %s: %s\n", + output == NULL ? "stdout" : output, image.message); + } + + /* else simpleover_process writes an error message */ + } + + else + fprintf(stderr, "simpleover: read %s: %s\n", argv[1], + image.message); + + free(buffer); + } + + else + { + fprintf(stderr, "simpleover: out of memory: %lu bytes\n", + (unsigned long)PNG_IMAGE_SIZE(image)); + + /* This is the only place where a 'free' is required; libpng does + * the cleanup on error and success, but in this case we couldn't + * complete the read because of running out of memory. + */ + png_image_free(&image); + } + } + + else + { + /* Failed to read the first argument: */ + fprintf(stderr, "simpleover: %s: %s\n", argv[1], image.message); + } + } + + else + { + /* Usage message */ + fprintf(stderr, + "simpleover: usage: simpleover background.png [output.png]\n" + " Output 'background.png' as a 24-bit RGB PNG file in 'output.png'\n" + " or, if not given, stdout. 'background.png' will be composited\n" + " on fully saturated green.\n" + "\n" + " Optionally, before output, process additional PNG files:\n" + "\n" + " --sprite=width,height,name {[--at=x,y] {sprite.png}}\n" + " Produce a transparent sprite of size (width,height) and with\n" + " name 'name'.\n" + " For each sprite.png composite it using a Porter-Duff 'Over'\n" + " operation at offset (x,y) in the sprite (defaulting to (0,0)).\n" + " Input PNGs will be truncated to the area of the sprite.\n" + "\n" + " --add='name' {x,y}\n" + " Optionally, before output, composite a sprite, 'name', which\n" + " must have been previously produced using --sprite, at each\n" + " offset (x,y) in the output image. Each sprite must fit\n" + " completely within the output image.\n" + "\n" + " PNG files are processed in the order they occur on the command\n" + " line and thus the first PNG processed appears as the bottommost\n" + " in the output image.\n"); + } + + return result; +} +#endif /* SIMPLIFIED_READ */ diff --git a/compat/libpng/contrib/gregbook/COPYING b/compat/libpng/contrib/gregbook/COPYING new file mode 100755 index 0000000..a3e9774 --- /dev/null +++ b/compat/libpng/contrib/gregbook/COPYING @@ -0,0 +1,340 @@ + GNU GENERAL PUBLIC LICENSE + Version 2, June 1991 + + Copyright (C) 1989, 1991 Free Software Foundation, Inc. + 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +License is intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. This +General Public License applies to most of the Free Software +Foundation's software and to any other program whose authors commit to +using it. (Some other Free Software Foundation software is covered by +the GNU Library General Public License instead.) You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +this service if you wish), that you receive source code or can get it +if you want it, that you can change the software or use pieces of it +in new free programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must show them these terms so they know their +rights. + + We protect your rights with two steps: (1) copyright the software, and +(2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + Finally, any free program is threatened constantly by software +patents. We wish to avoid the danger that redistributors of a free +program will individually obtain patent licenses, in effect making the +program proprietary. To prevent this, we have made it clear that any +patent must be licensed for everyone's free use or not licensed at all. + + The precise terms and conditions for copying, distribution and +modification follow. + + GNU GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License applies to any program or other work which contains +a notice placed by the copyright holder saying it may be distributed +under the terms of this General Public License. The "Program", below, +refers to any such program or work, and a "work based on the Program" +means either the Program or any derivative work under copyright law: +that is to say, a work containing the Program or a portion of it, +either verbatim or with modifications and/or translated into another +language. (Hereinafter, translation is included without limitation in +the term "modification".) Each licensee is addressed as "you". + +Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running the Program is not restricted, and the output from the Program +is covered only if its contents constitute a work based on the +Program (independent of having been made by running the Program). +Whether that is true depends on what the Program does. + + 1. You may copy and distribute verbatim copies of the Program's +source code as you receive it, in any medium, provided that you +conspicuously and appropriately publish on each copy an appropriate +copyright notice and disclaimer of warranty; keep intact all the +notices that refer to this License and to the absence of any warranty; +and give any other recipients of the Program a copy of this License +along with the Program. + +You may charge a fee for the physical act of transferring a copy, and +you may at your option offer warranty protection in exchange for a fee. + + 2. You may modify your copy or copies of the Program or any portion +of it, thus forming a work based on the Program, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) You must cause the modified files to carry prominent notices + stating that you changed the files and the date of any change. + + b) You must cause any work that you distribute or publish, that in + whole or in part contains or is derived from the Program or any + part thereof, to be licensed as a whole at no charge to all third + parties under the terms of this License. + + c) If the modified program normally reads commands interactively + when run, you must cause it, when started running for such + interactive use in the most ordinary way, to print or display an + announcement including an appropriate copyright notice and a + notice that there is no warranty (or else, saying that you provide + a warranty) and that users may redistribute the program under + these conditions, and telling the user how to view a copy of this + License. (Exception: if the Program itself is interactive but + does not normally print such an announcement, your work based on + the Program is not required to print an announcement.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Program, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Program, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Program. + +In addition, mere aggregation of another work not based on the Program +with the Program (or with a work based on the Program) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may copy and distribute the Program (or a work based on it, +under Section 2) in object code or executable form under the terms of +Sections 1 and 2 above provided that you also do one of the following: + + a) Accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of Sections + 1 and 2 above on a medium customarily used for software interchange; or, + + b) Accompany it with a written offer, valid for at least three + years, to give any third party, for a charge no more than your + cost of physically performing source distribution, a complete + machine-readable copy of the corresponding source code, to be + distributed under the terms of Sections 1 and 2 above on a medium + customarily used for software interchange; or, + + c) Accompany it with the information you received as to the offer + to distribute corresponding source code. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form with such + an offer, in accord with Subsection b above.) + +The source code for a work means the preferred form of the work for +making modifications to it. For an executable work, complete source +code means all the source code for all modules it contains, plus any +associated interface definition files, plus the scripts used to +control compilation and installation of the executable. However, as a +special exception, the source code distributed need not include +anything that is normally distributed (in either source or binary +form) with the major components (compiler, kernel, and so on) of the +operating system on which the executable runs, unless that component +itself accompanies the executable. + +If distribution of executable or object code is made by offering +access to copy from a designated place, then offering equivalent +access to copy the source code from the same place counts as +distribution of the source code, even though third parties are not +compelled to copy the source along with the object code. + + 4. You may not copy, modify, sublicense, or distribute the Program +except as expressly provided under this License. Any attempt +otherwise to copy, modify, sublicense or distribute the Program is +void, and will automatically terminate your rights under this License. +However, parties who have received copies, or rights, from you under +this License will not have their licenses terminated so long as such +parties remain in full compliance. + + 5. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Program or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Program (or any work based on the +Program), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Program or works based on it. + + 6. Each time you redistribute the Program (or any work based on the +Program), the recipient automatically receives a license from the +original licensor to copy, distribute or modify the Program subject to +these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties to +this License. + + 7. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Program at all. For example, if a patent +license would not permit royalty-free redistribution of the Program by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Program. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system, which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 8. If the distribution and/or use of the Program is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Program under this License +may add an explicit geographical distribution limitation excluding +those countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 9. The Free Software Foundation may publish revised and/or new versions +of the General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies a version number of this License which applies to it and "any +later version", you have the option of following the terms and conditions +either of that version or of any later version published by the Free +Software Foundation. If the Program does not specify a version number of +this License, you may choose any version ever published by the Free Software +Foundation. + + 10. If you wish to incorporate parts of the Program into other free +programs whose distribution conditions are different, write to the author +to ask for permission. For software which is copyrighted by the Free +Software Foundation, write to the Free Software Foundation; we sometimes +make exceptions for this. Our decision will be guided by the two goals +of preserving the free status of all derivatives of our free software and +of promoting the sharing and reuse of software generally. + + NO WARRANTY + + 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY +FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN +OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE +PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, +REPAIR OR CORRECTION. + + 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR +REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING +OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY +YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER +PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + + Copyright (C) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + +Also add information on how to contact you by electronic and paper mail. + +If the program is interactive, make it output a short notice like this +when it starts in an interactive mode: + + Gnomovision version 69, Copyright (C) year name of author + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, the commands you use may +be called something other than `show w' and `show c'; they could even be +mouse-clicks or menu items--whatever suits your program. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the program, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the program + `Gnomovision' (which makes passes at compilers) written by James Hacker. + + , 1 April 1989 + Ty Coon, President of Vice + +This General Public License does not permit incorporating your program into +proprietary programs. If your program is a subroutine library, you may +consider it more useful to permit linking proprietary applications with the +library. If this is what you want to do, use the GNU Library General +Public License instead of this License. diff --git a/compat/libpng/contrib/gregbook/LICENSE b/compat/libpng/contrib/gregbook/LICENSE new file mode 100755 index 0000000..40a0c8e --- /dev/null +++ b/compat/libpng/contrib/gregbook/LICENSE @@ -0,0 +1,50 @@ + --------------------------------------------------------------------------- + + Copyright (c) 1998-2008 Greg Roelofs. All rights reserved. + + This software is provided "as is," without warranty of any kind, + express or implied. In no event shall the author or contributors + be held liable for any damages arising in any way from the use of + this software. + + The contents of this file are DUAL-LICENSED. You may modify and/or + redistribute this software according to the terms of one of the + following two licenses (at your option): + + + LICENSE 1 ("BSD-like with advertising clause"): + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute + it freely, subject to the following restrictions: + + 1. Redistributions of source code must retain the above copyright + notice, disclaimer, and this list of conditions. + 2. Redistributions in binary form must reproduce the above copyright + notice, disclaimer, and this list of conditions in the documenta- + tion and/or other materials provided with the distribution. + 3. All advertising materials mentioning features or use of this + software must display the following acknowledgment: + + This product includes software developed by Greg Roelofs + and contributors for the book, "PNG: The Definitive Guide," + published by O'Reilly and Associates. + + + LICENSE 2 (GNU GPL v2 or later): + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software Foundation, + Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + --------------------------------------------------------------------------- diff --git a/compat/libpng/contrib/gregbook/Makefile.mingw32 b/compat/libpng/contrib/gregbook/Makefile.mingw32 new file mode 100755 index 0000000..3a3ff60 --- /dev/null +++ b/compat/libpng/contrib/gregbook/Makefile.mingw32 @@ -0,0 +1,131 @@ +# Sample makefile for rpng-win / rpng2-win / wpng using mingw32-gcc and make. +# Greg Roelofs +# Last modified: 2 June 2007 +# +# The programs built by this makefile are described in the book, +# "PNG: The Definitive Guide," by Greg Roelofs (O'Reilly and +# Associates, 1999). Go buy a copy, eh? Well, OK, it's not +# generally for sale anymore, but it's the thought that counts, +# right? (Hint: http://www.libpng.org/pub/png/book/ ) +# +# Invoke this makefile from a DOS-prompt window via: +# +# make -f Makefile.mingw32 +# +# This makefile assumes libpng and zlib have already been built or downloaded +# and are in subdirectories at the same level as the current subdirectory +# (as indicated by the PNGDIR and ZDIR macros below). It makes no assumptions +# at all about the mingw32 installation tree (W32DIR). Edit as appropriate. +# +# Note that the names of the dynamic and static libpng and zlib libraries +# used below may change in later releases of the libraries. This makefile +# builds both statically and dynamically linked executables by default. +# (You need only one set, but for testing it can be handy to have both.) + + +# macros -------------------------------------------------------------------- + +#PNGDIR = ../..# for libpng-x.y.z/contrib/gregbook builds +PNGDIR = ../libpng-win32 +PNGINC = -I$(PNGDIR) +PNGLIBd = $(PNGDIR)/libpng.dll.a # dynamically linked +PNGLIBs = $(PNGDIR)/libpng.a # statically linked, local libpng + +#ZDIR = ../../../zlib-win32# for libpng-x.y.z/contrib/gregbook builds +ZDIR = ../zlib-win32 +ZINC = -I$(ZDIR) +ZLIBd = $(ZDIR)/libzdll.a +ZLIBs = $(ZDIR)/libz.a + +# change this to be the path where mingw32 installs its stuff: +W32DIR = +#W32DIR = /usr/local/cross-tools/i386-mingw32msvc +W32INC = -I$(W32DIR)/include +W32LIB = $(W32DIR)/lib/libuser32.a $(W32DIR)/lib/libgdi32.a + +CC = gcc +#CC = i386-mingw32msvc-gcc # e.g., Linux -> Win32 cross-compilation +LD = $(CC) +RM = rm -f +CPPFLAGS = $(INCS) +CFLAGS = -O -Wall $(MINGW_CCFLAGS) +# [note that -Wall is a gcc-specific compilation flag ("most warnings on")] +# [-ansi, -pedantic and -W can also be used] +LDFLAGS = $(MINGW_LDFLAGS) +O = .o +E = .exe + +INCS = $(PNGINC) $(ZINC) $(W32INC) +RLIBSd = $(PNGLIBd) $(ZLIBd) $(W32LIB) -lm +RLIBSs = $(PNGLIBs) $(ZLIBs) $(W32LIB) -lm +WLIBSd = $(PNGLIBd) $(ZLIBd) +WLIBSs = $(PNGLIBs) $(ZLIBs) + +RPNG = rpng-win +RPNG2 = rpng2-win +WPNG = wpng + +ROBJSd = $(RPNG)$(O) readpng.pic$(O) +ROBJS2d = $(RPNG2)$(O) readpng2.pic$(O) +WOBJSd = $(WPNG)$(O) writepng.pic$(O) + +RPNGs = $(RPNG)-static +RPNG2s = $(RPNG2)-static +WPNGs = $(WPNG)-static + +ROBJSs = $(RPNG)$(O) readpng$(O) +ROBJS2s = $(RPNG2)$(O) readpng2$(O) +WOBJSs = $(WPNG)$(O) writepng$(O) + +STATIC_EXES = $(RPNGs)$(E) $(RPNG2s)$(E) $(WPNGs)$(E) +DYNAMIC_EXES = $(RPNG)$(E) $(RPNG2)$(E) $(WPNG)$(E) + +EXES = $(STATIC_EXES) $(DYNAMIC_EXES) + + +# implicit make rules ------------------------------------------------------- + +.c$(O): + $(CC) -c $(CPPFLAGS) $(CFLAGS) $< + +%.pic$(O): %.c + $(CC) -c $(CPPFLAGS) $(CFLAGS) -DPNG_BUILD_DLL -o $@ $< + + +# dependencies -------------------------------------------------------------- + +all: $(EXES) + +$(RPNGs)$(E): $(ROBJSs) + $(LD) $(LDFLAGS) -o $@ $(ROBJSs) $(RLIBSs) + +$(RPNG)$(E): $(ROBJSd) + $(LD) $(LDFLAGS) -o $@ $(ROBJSd) $(RLIBSd) + +$(RPNG2s)$(E): $(ROBJS2s) + $(LD) $(LDFLAGS) -o $@ $(ROBJS2s) $(RLIBSs) + +$(RPNG2)$(E): $(ROBJS2d) + $(LD) $(LDFLAGS) -o $@ $(ROBJS2d) $(RLIBSd) + +$(WPNGs)$(E): $(WOBJSs) + $(LD) $(LDFLAGS) -o $@ $(WOBJSs) $(WLIBSs) + +$(WPNG)$(E): $(WOBJSd) + $(LD) $(LDFLAGS) -o $@ $(WOBJSd) $(WLIBSd) + +$(RPNG)$(O): $(RPNG).c readpng.h +$(RPNG2)$(O): $(RPNG2).c readpng2.h +$(WPNG)$(O): $(WPNG).c writepng.h + +readpng$(O) readpng.pic$(O): readpng.c readpng.h +readpng2$(O) readpng2.pic$(O): readpng2.c readpng2.h +writepng$(O) writepng.pic$(O): writepng.c writepng.h + + +# maintenance --------------------------------------------------------------- + +clean: + $(RM) $(EXES) + $(RM) $(ROBJSs) $(ROBJS2s) $(WOBJSs) + $(RM) $(ROBJSd) $(ROBJS2d) $(WOBJSd) diff --git a/compat/libpng/contrib/gregbook/Makefile.sgi b/compat/libpng/contrib/gregbook/Makefile.sgi new file mode 100755 index 0000000..c78adf7 --- /dev/null +++ b/compat/libpng/contrib/gregbook/Makefile.sgi @@ -0,0 +1,105 @@ +# Sample makefile for rpng-x / rpng2-x / wpng for SGI using cc and make. +# Greg Roelofs +# Last modified: 7 March 2002 +# +# The programs built by this makefile are described in the book, +# "PNG: The Definitive Guide," by Greg Roelofs (O'Reilly and +# Associates, 1999). Go buy a copy, eh? Buy some for friends +# and family, too. (Not that this is a blatant plug or anything.) +# +# Invoke this makefile from a shell prompt in the usual way; for example: +# +# make -f Makefile.sgi +# +# This makefile assumes libpng and zlib have already been built or downloaded +# and are both installed in /usr/local/{include,lib} (as indicated by the +# PNG* and Z* macros below). Edit as appropriate--choose only ONE each of +# the PNGINC, PNGLIB, ZINC and ZLIB lines. +# +# This makefile builds dynamically linked executables (against libpng and zlib, +# that is), but that can be changed by uncommenting the appropriate PNGLIB and +# ZLIB lines. + + +# macros -------------------------------------------------------------------- + +PNGINC = -I/usr/local/include/libpng16 +PNGLIB = -L/usr/local/lib -lpng16 # dynamically linked against libpng +#PNGLIB = /usr/local/lib/libpng16.a # statically linked against libpng +# or: +#PNGINC = -I../.. +#PNGLIB = -L../.. -lpng +#PNGLIB = ../../libpng.a + +ZINC = -I/usr/local/include +ZLIB = -L/usr/local/lib -lz # dynamically linked against zlib +#ZLIB = /usr/local/lib/libz.a # statically linked against zlib +#ZINC = -I../zlib +#ZLIB = -L../zlib -lz +#ZLIB = ../../../zlib/libz.a + +XINC = -I/usr/include/X11 # old-style, stock X distributions +XLIB = -L/usr/lib/X11 -lX11 +#XINC = -I/usr/openwin/include # Sun workstations (OpenWindows) +#XLIB = -L/usr/openwin/lib -lX11 +#XINC = -I/usr/X11R6/include # new X distributions (XFree86, etc.) +#XLIB = -L/usr/X11R6/lib -lX11 + +INCS = $(PNGINC) $(ZINC) $(XINC) +RLIBS = $(PNGLIB) $(ZLIB) $(XLIB) -lm +WLIBS = $(PNGLIB) $(ZLIB) + +CC = cc +LD = cc +RM = rm -f +# ABI must be the same as that used to build libpng. +ABI = +CPPFLAGS = +CFLAGS = $(ABI) -O -fullwarn $(INCS) +LDFLAGS = $(ABI) +O = .o +E = + +RPNG = rpng-x +RPNG2 = rpng2-x +WPNG = wpng + +ROBJS = $(RPNG)$(O) readpng$(O) +ROBJS2 = $(RPNG2)$(O) readpng2$(O) +WOBJS = $(WPNG)$(O) writepng$(O) + +EXES = $(RPNG)$(E) $(RPNG2)$(E) $(WPNG)$(E) + + +# implicit make rules ------------------------------------------------------- + +.c$(O): + $(CC) -c $(CPPFLAGS) $(CFLAGS) $< + + +# dependencies -------------------------------------------------------------- + +all: $(EXES) + +$(RPNG)$(E): $(ROBJS) + $(LD) $(LDFLAGS) -o $@ $(ROBJS) $(RLIBS) + +$(RPNG2)$(E): $(ROBJS2) + $(LD) $(LDFLAGS) -o $@ $(ROBJS2) $(RLIBS) + +$(WPNG)$(E): $(WOBJS) + $(LD) $(LDFLAGS) -o $@ $(WOBJS) $(WLIBS) + +$(RPNG)$(O): $(RPNG).c readpng.h +$(RPNG2)$(O): $(RPNG2).c readpng2.h +$(WPNG)$(O): $(WPNG).c writepng.h + +readpng$(O): readpng.c readpng.h +readpng2$(O): readpng2.c readpng2.h +writepng$(O): writepng.c writepng.h + + +# maintenance --------------------------------------------------------------- + +clean: + $(RM) $(EXES) $(ROBJS) $(ROBJS2) $(WOBJS) diff --git a/compat/libpng/contrib/gregbook/Makefile.unx b/compat/libpng/contrib/gregbook/Makefile.unx new file mode 100755 index 0000000..6acb722 --- /dev/null +++ b/compat/libpng/contrib/gregbook/Makefile.unx @@ -0,0 +1,134 @@ +# Sample makefile for rpng-x / rpng2-x / wpng using gcc and make. +# Greg Roelofs +# Last modified: 2 June 2007 +# +# The programs built by this makefile are described in the book, +# "PNG: The Definitive Guide," by Greg Roelofs (O'Reilly and +# Associates, 1999). Go buy a copy, eh? Well, OK, it's not +# generally for sale anymore, but it's the thought that counts, +# right? (Hint: http://www.libpng.org/pub/png/book/ ) +# +# Invoke this makefile from a shell prompt in the usual way; for example: +# +# make -f Makefile.unx +# +# This makefile assumes libpng and zlib have already been built or downloaded +# and are installed in /usr/local/{include,lib} or as otherwise indicated by +# the PNG* and Z* macros below. Edit as appropriate--choose only ONE each of +# the PNGINC, PNGLIBd, PNGLIBs, ZINC, ZLIBd and ZLIBs lines. +# +# This makefile builds both dynamically and statically linked executables +# (against libpng and zlib, that is), but that can be changed by modifying +# the "EXES =" line. (You need only one set, but for testing it can be handy +# to have both.) + + +# macros -------------------------------------------------------------------- + +#PNGDIR = /usr/local/lib +#PNGINC = -I/usr/local/include/libpng16 +#PNGLIBd = -L$(PNGDIR) -lpng16 # dynamically linked, installed libpng +#PNGLIBs = $(PNGDIR)/libpng16.a # statically linked, installed libpng +# or: +PNGDIR = ../..# this one is for libpng-x.y.z/contrib/gregbook builds +#PNGDIR = ../libpng +PNGINC = -I$(PNGDIR) +PNGLIBd = -Wl,-rpath,$(PNGDIR) -L$(PNGDIR) -lpng16 # dynamically linked +PNGLIBs = $(PNGDIR)/libpng.a # statically linked, local libpng + +ZDIR = /usr/local/lib +#ZDIR = /usr/lib64 +ZINC = -I/usr/local/include +ZLIBd = -L$(ZDIR) -lz # dynamically linked against zlib +ZLIBs = $(ZDIR)/libz.a # statically linked against zlib +# or: +#ZDIR = ../zlib +#ZINC = -I$(ZDIR) +#ZLIBd = -Wl,-rpath,$(ZDIR) -L$(ZDIR) -lz # -rpath allows in-place testing +#ZLIBs = $(ZDIR)/libz.a + +#XINC = -I/usr/include # old-style, stock X distributions +#XLIB = -L/usr/lib/X11 -lX11 # (including SGI IRIX) +#XINC = -I/usr/openwin/include # Sun workstations (OpenWindows) +#XLIB = -L/usr/openwin/lib -lX11 +XINC = -I/usr/X11R6/include # new X distributions (X.org, etc.) +XLIB = -L/usr/X11R6/lib -lX11 +#XLIB = -L/usr/X11R6/lib64 -lX11 # e.g., Red Hat on AMD64 + +INCS = $(PNGINC) $(ZINC) $(XINC) +RLIBSd = $(PNGLIBd) $(ZLIBd) $(XLIB) -lm +RLIBSs = $(PNGLIBs) $(ZLIBs) $(XLIB) -lm +WLIBSd = $(PNGLIBd) $(ZLIBd) -lm +WLIBSs = $(PNGLIBs) $(ZLIBs) -lm + +CC = gcc +LD = gcc +RM = rm -f +CPPFLAGS = $(INCS) -DFEATURE_LOOP +CFLAGS = -O -Wall +#CFLAGS = -O -W -Wall -Wextra -pedantic -ansi +# [note that -Wall is a gcc-specific compilation flag ("most warnings on")] +# [-ansi, -pedantic, -Wextra, and -W can also be used] +LDFLAGS = +O = .o +E = + +RPNG = rpng-x +RPNG2 = rpng2-x +WPNG = wpng + +RPNGs = $(RPNG)-static +RPNG2s = $(RPNG2)-static +WPNGs = $(WPNG)-static + +ROBJS = $(RPNG)$(O) readpng$(O) +ROBJS2 = $(RPNG2)$(O) readpng2$(O) +WOBJS = $(WPNG)$(O) writepng$(O) + +STATIC_EXES = $(RPNGs)$(E) $(RPNG2s)$(E) $(WPNGs)$(E) +DYNAMIC_EXES = $(RPNG)$(E) $(RPNG2)$(E) $(WPNG)$(E) + +EXES = $(STATIC_EXES) $(DYNAMIC_EXES) + + +# implicit make rules ------------------------------------------------------- + +.c$(O): + $(CC) -c $(CPPFLAGS) $(CFLAGS) $< + + +# dependencies -------------------------------------------------------------- + +all: $(EXES) + +$(RPNGs)$(E): $(ROBJS) + $(LD) $(LDFLAGS) -o $@ $(ROBJS) $(RLIBSs) + +$(RPNG)$(E): $(ROBJS) + $(LD) $(LDFLAGS) -o $@ $(ROBJS) $(RLIBSd) + +$(RPNG2s)$(E): $(ROBJS2) + $(LD) $(LDFLAGS) -o $@ $(ROBJS2) $(RLIBSs) + +$(RPNG2)$(E): $(ROBJS2) + $(LD) $(LDFLAGS) -o $@ $(ROBJS2) $(RLIBSd) + +$(WPNGs)$(E): $(WOBJS) + $(LD) $(LDFLAGS) -o $@ $(WOBJS) $(WLIBSs) + +$(WPNG)$(E): $(WOBJS) + $(LD) $(LDFLAGS) -o $@ $(WOBJS) $(WLIBSd) + +$(RPNG)$(O): $(RPNG).c readpng.h +$(RPNG2)$(O): $(RPNG2).c readpng2.h +$(WPNG)$(O): $(WPNG).c writepng.h + +readpng$(O): readpng.c readpng.h +readpng2$(O): readpng2.c readpng2.h +writepng$(O): writepng.c writepng.h + + +# maintenance --------------------------------------------------------------- + +clean: + $(RM) $(EXES) $(ROBJS) $(ROBJS2) $(WOBJS) diff --git a/compat/libpng/contrib/gregbook/Makefile.w32 b/compat/libpng/contrib/gregbook/Makefile.w32 new file mode 100755 index 0000000..6afee0d --- /dev/null +++ b/compat/libpng/contrib/gregbook/Makefile.w32 @@ -0,0 +1,114 @@ +# Sample makefile for rpng-win / rpng2-win / wpng using MSVC and NMAKE. +# Greg Roelofs +# Last modified: 2 June 2007 +# +# The programs built by this makefile are described in the book, +# "PNG: The Definitive Guide," by Greg Roelofs (O'Reilly and +# Associates, 1999). Go buy a copy, eh? Well, OK, it's not +# generally for sale anymore, but it's the thought that counts, +# right? (Hint: http://www.libpng.org/pub/png/book/ ) +# +# Invoke this makefile from a DOS prompt window via: +# +# %devstudio%\vc\bin\vcvars32.bat +# nmake -nologo -f Makefile.w32 +# +# where %devstudio% is the installation directory for MSVC / DevStudio. If +# you get "environment out of space" errors, create a desktop shortcut with +# "c:\windows\command.com /e:4096" as the program command line and set the +# working directory to this directory. Then double-click to open the new +# DOS-prompt window with a bigger environment and retry the commands above. +# +# This makefile assumes libpng and zlib have already been built or downloaded +# and are in subdirectories at the same level as the current subdirectory +# (as indicated by the PNGPATH and ZPATH macros below). Edit as appropriate. +# +# Note that the names of the dynamic and static libpng and zlib libraries +# used below may change in later releases of the libraries. This makefile +# builds statically linked executables, but that can be changed by uncom- +# menting the appropriate PNGLIB and ZLIB lines. + +!include + + +# macros -------------------------------------------------------------------- + +PNGPATH = ../libpng +PNGINC = -I$(PNGPATH) +#PNGLIB = $(PNGPATH)/pngdll.lib +PNGLIB = $(PNGPATH)/libpng.lib + +ZPATH = ../zlib +ZINC = -I$(ZPATH) +#ZLIB = $(ZPATH)/zlibdll.lib +ZLIB = $(ZPATH)/zlibstat.lib + +WINLIBS = -defaultlib:user32.lib gdi32.lib +# ["real" apps may also need comctl32.lib, comdlg32.lib, winmm.lib, etc.] + +INCS = $(PNGINC) $(ZINC) +RLIBS = $(PNGLIB) $(ZLIB) $(WINLIBS) +WLIBS = $(PNGLIB) $(ZLIB) + +CC = cl +LD = link +RM = del +CPPFLAGS = $(INCS) +CFLAGS = -nologo -O -W3 $(cvars) +# [note that -W3 is an MSVC-specific compilation flag ("all warnings on")] +# [see %devstudio%\vc\include\win32.mak for cvars macro definition] +O = .obj +E = .exe + +RLDFLAGS = -nologo -subsystem:windows +WLDFLAGS = -nologo + +RPNG = rpng-win +RPNG2 = rpng2-win +WPNG = wpng + +ROBJS = $(RPNG)$(O) readpng$(O) +ROBJS2 = $(RPNG2)$(O) readpng2$(O) +WOBJS = $(WPNG)$(O) writepng$(O) + +EXES = $(RPNG)$(E) $(RPNG2)$(E) $(WPNG)$(E) + + +# implicit make rules ------------------------------------------------------- + +.c$(O): + $(CC) -c $(CPPFLAGS) $(CFLAGS) $< + + +# dependencies -------------------------------------------------------------- + +all: $(EXES) + +$(RPNG)$(E): $(ROBJS) + $(LD) $(RLDFLAGS) -out:$@ $(ROBJS) $(RLIBS) + +$(RPNG2)$(E): $(ROBJS2) + $(LD) $(RLDFLAGS) -out:$@ $(ROBJS2) $(RLIBS) + +$(WPNG)$(E): $(WOBJS) + $(LD) $(WLDFLAGS) -out:$@ $(WOBJS) $(WLIBS) + +$(RPNG)$(O): $(RPNG).c readpng.h +$(RPNG2)$(O): $(RPNG2).c readpng2.h +$(WPNG)$(O): $(WPNG).c writepng.h + +readpng$(O): readpng.c readpng.h +readpng2$(O): readpng2.c readpng2.h +writepng$(O): writepng.c writepng.h + + +# maintenance --------------------------------------------------------------- + +clean: +# ideally we could just do this: +# $(RM) $(EXES) $(ROBJS) $(ROBJS2) $(WOBJS) +# ...but the Windows "DEL" command is none too bright, so: + $(RM) r*$(E) + $(RM) w*$(E) + $(RM) r*$(O) + $(RM) w*$(O) diff --git a/compat/libpng/contrib/gregbook/README b/compat/libpng/contrib/gregbook/README new file mode 100755 index 0000000..791fec8 --- /dev/null +++ b/compat/libpng/contrib/gregbook/README @@ -0,0 +1,186 @@ + =========================== + PNG: The Definitive Guide + =========================== + + Source Code + +Chapters 13, 14 and 15 of "PNG: The Definitive Guide" discuss three free, +cross-platform demo programs that show how to use the libpng reference +library: rpng, rpng2 and wpng. rpng and rpng2 are viewers; the first is +a very simple example that that shows how a standard file-viewer might use +libpng, while the second is designed to process streaming data and shows +how a web browser might be written. wpng is a simple command-line program +that reads binary PGM and PPM files (the ``raw'' grayscale and RGB subsets +of PBMPLUS/NetPBM) and converts them to PNG. + +The source code for all three demo programs currently compiles under +Unix, OpenVMS, and 32-bit Windows. (Special thanks to Martin Zinser, +zinser@decus.de, for making the necessary changes for OpenVMS and for +providing an appropriate build script.) Build instructions can be found +below. + +Files: + + README this file + LICENSE terms of distribution and reuse (BSD-like or GNU GPL) + COPYING GNU General Public License (GPL) + + Makefile.unx Unix makefile + Makefile.w32 Windows (MSVC) makefile + makevms.com OpenVMS build script + + rpng-win.c Windows front end for the basic viewer + rpng-x.c X Window System (Unix, OpenVMS) front end + readpng.c generic back end for the basic viewer + readpng.h header file for the basic viewer + + rpng2-win.c Windows front end for the progressive viewer + rpng2-x.c X front end for the progressive viewer + readpng2.c generic back end for the progressive viewer + readpng2.h header file for the progressive viewer + + wpng.c generic (text) front end for the converter + writepng.c generic back end for the converter + writepng.h header file for the converter + + toucan.png transparent PNG for testing (by Stefan Schneider) + +Note that, although the programs are designed to be functional, their +primary purpose is to illustrate how to use libpng to add PNG support to +other programs. As such, their user interfaces are crude and definitely +are not intended for everyday use. + +Please see http://www.libpng.org/pub/png/pngbook.html for further infor- +mation and links to the latest version of the source code, and Chapters +13-15 of the book for detailed discussion of the three programs. + +Greg Roelofs +http://pobox.com/~newt/greg_contact.html +16 March 2008 + + +BUILD INSTRUCTIONS + + - Prerequisites (in order of compilation): + + - zlib http://zlib.net/ + - libpng http://www.libpng.org/pub/png/libpng.html + - pngbook http://www.libpng.org/pub/png/book/sources.html + + The pngbook demo programs are explicitly designed to demonstrate proper + coding techniques for using the libpng reference library. As a result, + you need to download and build both zlib (on which libpng depends) and + libpng. A common build setup is to place the zlib, libpng and pngbook + subdirectory trees ("folders") in the same parent directory. Then the + libpng build can refer to files in ../zlib (or ..\zlib or [-.zlib]), + and similarly for the pngbook build. + + Note that all three packages are designed to be built from a command + line by default; those who wish to use a graphical or other integrated + development environments are on their own. + + + - Unix: + + Unpack the latest pngbook sources (which should correspond to this + README file) into a directory and change into that directory. + + Copy Makefile.unx to Makefile and edit the PNG* and Z* variables + appropriately (possibly also the X* variables if necessary). + + make + + There is no "install" target, so copy the three executables somewhere + in your path or run them from the current directory. All three will + print a basic usage screen when run without any command-line arguments; + see the book for more details. + + + - Windows: + + Unpack the latest pngbook sources (which should correspond to this + README file) into a folder, open a "DOS shell" or "command prompt" + or equivalent command-line window, and cd into the folder where you + unpacked the source code. + + For MSVC, set up the necessary environment variables by invoking + + %devstudio%\vc\bin\vcvars32.bat + + where where %devstudio% is the installation directory for MSVC / + DevStudio. If you get "environment out of space" errors under 95/98, + create a desktop shortcut with "c:\windows\command.com /e:4096" as + the program command line and set the working directory to the pngbook + directory. Then double-click to open the new DOS-prompt window with + a bigger environment and retry the commands above. + + Copy Makefile.w32 to Makefile and edit the PNGPATH and ZPATH variables + appropriately (possibly also the "INC" and "LIB" variables if needed). + Note that the names of the dynamic and static libpng and zlib libraries + used in the makefile may change in later releases of the libraries. + Also note that, as of libpng version 1.0.5, MSVC DLL builds do not work. + This makefile therefore builds statically linked executables, but if + the DLL problems ever get fixed, uncommenting the appropriate PNGLIB + and ZLIB lines will build dynamically linked executables instead. + + Do the build by typing + + nmake + + The result should be three executables: rpng-win.exe, rpng2-win.exe, + and wpng.exe. Copy them somewhere in your PATH or run them from the + current folder. Like the Unix versions, the two windowed programs + (rpng and rpng2) now display a usage screen in a console window when + invoked without command-line arguments; this is new behavior as of + the June 2001 release. Note that the programs use the Unix-style "-" + character to specify options, instead of the more common DOS/Windows + "/" character. (For example: "rpng2-win -bgpat 4 foo.png", not + "rpng2-win /bgpat 4 foo.png") + + + - OpenVMS: + + Unpack the pngbook sources into a subdirectory and change into that + subdirectory. + + Edit makevms.com appropriately, specifically the zpath and pngpath + variables. + + @makevms + + To run the programs, they probably first need to be set up as "foreign + symbols," with "disk" and "dir" set appropriately: + + $ rpng == "$disk:[dir]rpng-x.exe" + $ rpng2 == "$disk:[dir]rpng2-x.exe" + $ wpng == "$disk:[dir]wpng.exe" + + All three will print a basic usage screen when run without any command- + line arguments; see the book for more details. Note that the options + style is Unix-like, i.e., preceded by "-" rather than "/". + + +RUNNING THE PROGRAMS: (VERY) BRIEF INTRO + + rpng is a simple PNG viewer that can display transparent PNGs with a + specified background color; for example, + + rpng -bgcolor \#ff0000 toucan.png + + would display the image with a red background. rpng2 is a progressive + viewer that simulates a web browser in some respects; it can display + images against either a background color or a dynamically generated + background image. For example: + + rpng2 -bgpat 16 toucan.png + + wpng is a purely command-line image converter from binary PBMPLUS/NetPBM + format (.pgm or .ppm) to PNG; for example, + + wpng -time < toucan-notrans.ppm > toucan-notrans.png + + would convert the specified PPM file (using redirection) to PNG, auto- + matically setting the PNG modification-time chunk. + + All options can be abbreviated to the shortest unique value; for example, + "-bgc" for -bgcolor (versus "-bgp" for -bgpat), or "-g" for -gamma. diff --git a/compat/libpng/contrib/gregbook/makevms.com b/compat/libpng/contrib/gregbook/makevms.com new file mode 100755 index 0000000..29a5727 --- /dev/null +++ b/compat/libpng/contrib/gregbook/makevms.com @@ -0,0 +1,132 @@ +$!------------------------------------------------------------------------------ +$! make "PNG: The Definitive Guide" demo programs (for X) under OpenVMS +$! +$! Script created by Martin Zinser for libpng; modified by Greg Roelofs +$! for standalone pngbook source distribution. +$! +$! +$! Set locations where zlib and libpng sources live. +$! +$ zpath = "" +$ pngpath = "" +$! +$ if f$search("[---.zlib]zlib.h").nes."" then zpath = "[---.zlib]" +$ if f$search("[--]png.h").nes."" then pngpath = "[--]" +$! +$ if f$search("[-.zlib]zlib.h").nes."" then zpath = "[-.zlib]" +$ if f$search("[-.libpng]png.h").nes."" then pngpath = "[-.libpng]" +$! +$ if zpath .eqs. "" +$ then +$ write sys$output "zlib include not found. Exiting..." +$ exit 2 +$ endif +$! +$ if pngpath .eqs. "" +$ then +$ write sys$output "libpng include not found. Exiting..." +$ exit 2 +$ endif +$! +$! Look for the compiler used. +$! +$ ccopt="/include=(''zpath',''pngpath')" +$ if f$getsyi("HW_MODEL").ge.1024 +$ then +$ ccopt = "/prefix=all"+ccopt +$ comp = "__decc__=1" +$ if f$trnlnm("SYS").eqs."" then define sys sys$library: +$ else +$ if f$search("SYS$SYSTEM:DECC$COMPILER.EXE").eqs."" +$ then +$ if f$trnlnm("SYS").eqs."" then define sys sys$library: +$ if f$search("SYS$SYSTEM:VAXC.EXE").eqs."" +$ then +$ comp = "__gcc__=1" +$ CC :== GCC +$ else +$ comp = "__vaxc__=1" +$ endif +$ else +$ if f$trnlnm("SYS").eqs."" then define sys decc$library_include: +$ ccopt = "/decc/prefix=all"+ccopt +$ comp = "__decc__=1" +$ endif +$ endif +$ open/write lopt lib.opt +$ write lopt "''pngpath'libpng.olb/lib" +$ write lopt "''zpath'libz.olb/lib" +$ close lopt +$ open/write xopt x11.opt +$ write xopt "sys$library:decw$xlibshr.exe/share" +$ close xopt +$! +$! Build 'em. +$! +$ write sys$output "Compiling PNG book programs ..." +$ CALL MAKE readpng.OBJ "cc ''CCOPT' readpng" - + readpng.c readpng.h +$ CALL MAKE readpng2.OBJ "cc ''CCOPT' readpng2" - + readpng2.c readpng2.h +$ CALL MAKE writepng.OBJ "cc ''CCOPT' writepng" - + writepng.c writepng.h +$ write sys$output "Building rpng-x..." +$ CALL MAKE rpng-x.OBJ "cc ''CCOPT' rpng-x" - + rpng-x.c readpng.h +$ call make rpng-x.exe - + "LINK rpng-x,readpng,lib.opt/opt,x11.opt/opt" - + rpng-x.obj readpng.obj +$ write sys$output "Building rpng2-x..." +$ CALL MAKE rpng2-x.OBJ "cc ''CCOPT' rpng2-x" - + rpng2-x.c readpng2.h +$ call make rpng2-x.exe - + "LINK rpng2-x,readpng2,lib.opt/opt,x11.opt/opt" - + rpng2-x.obj readpng2.obj +$ write sys$output "Building wpng..." +$ CALL MAKE wpng.OBJ "cc ''CCOPT' wpng" - + wpng.c writepng.h +$ call make wpng.exe - + "LINK wpng,writepng,lib.opt/opt" - + wpng.obj writepng.obj +$ exit +$! +$! +$MAKE: SUBROUTINE !SUBROUTINE TO CHECK DEPENDENCIES +$ V = 'F$Verify(0) +$! P1 = What we are trying to make +$! P2 = Command to make it +$! P3 - P8 What it depends on +$ +$ If F$Search(P1) .Eqs. "" Then Goto Makeit +$ Time = F$CvTime(F$File(P1,"RDT")) +$arg=3 +$Loop: +$ Argument = P'arg +$ If Argument .Eqs. "" Then Goto Exit +$ El=0 +$Loop2: +$ File = F$Element(El," ",Argument) +$ If File .Eqs. " " Then Goto Endl +$ AFile = "" +$Loop3: +$ OFile = AFile +$ AFile = F$Search(File) +$ If AFile .Eqs. "" .Or. AFile .Eqs. OFile Then Goto NextEl +$ If F$CvTime(F$File(AFile,"RDT")) .Ges. Time Then Goto Makeit +$ Goto Loop3 +$NextEL: +$ El = El + 1 +$ Goto Loop2 +$EndL: +$ arg=arg+1 +$ If arg .Le. 8 Then Goto Loop +$ Goto Exit +$ +$Makeit: +$ VV=F$VERIFY(0) +$ write sys$output P2 +$ 'P2 +$ VV='F$Verify(VV) +$Exit: +$ If V Then Set Verify +$ENDSUBROUTINE diff --git a/compat/libpng/contrib/gregbook/readpng.c b/compat/libpng/contrib/gregbook/readpng.c new file mode 100755 index 0000000..c165a08 --- /dev/null +++ b/compat/libpng/contrib/gregbook/readpng.c @@ -0,0 +1,317 @@ +/*--------------------------------------------------------------------------- + + rpng - simple PNG display program readpng.c + + --------------------------------------------------------------------------- + + Copyright (c) 1998-2007 Greg Roelofs. All rights reserved. + + This software is provided "as is," without warranty of any kind, + express or implied. In no event shall the author or contributors + be held liable for any damages arising in any way from the use of + this software. + + The contents of this file are DUAL-LICENSED. You may modify and/or + redistribute this software according to the terms of one of the + following two licenses (at your option): + + + LICENSE 1 ("BSD-like with advertising clause"): + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute + it freely, subject to the following restrictions: + + 1. Redistributions of source code must retain the above copyright + notice, disclaimer, and this list of conditions. + 2. Redistributions in binary form must reproduce the above copyright + notice, disclaimer, and this list of conditions in the documenta- + tion and/or other materials provided with the distribution. + 3. All advertising materials mentioning features or use of this + software must display the following acknowledgment: + + This product includes software developed by Greg Roelofs + and contributors for the book, "PNG: The Definitive Guide," + published by O'Reilly and Associates. + + + LICENSE 2 (GNU GPL v2 or later): + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software Foundation, + Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + ---------------------------------------------------------------------------*/ + +#include +#include +#include + +#include "png.h" /* libpng header */ +#include "readpng.h" /* typedefs, common macros, public prototypes */ + +/* future versions of libpng will provide this macro: */ +#ifndef png_jmpbuf +# define png_jmpbuf(png_ptr) ((png_ptr)->jmpbuf) +#endif + + +static png_structp png_ptr = NULL; +static png_infop info_ptr = NULL; + +png_uint_32 width, height; +int bit_depth, color_type; +uch *image_data = NULL; + + +void readpng_version_info(void) +{ + fprintf(stderr, " Compiled with libpng %s; using libpng %s.\n", + PNG_LIBPNG_VER_STRING, png_libpng_ver); + fprintf(stderr, " Compiled with zlib %s; using zlib %s.\n", + ZLIB_VERSION, zlib_version); +} + + +/* return value = 0 for success, 1 for bad sig, 2 for bad IHDR, 4 for no mem */ + +int readpng_init(FILE *infile, ulg *pWidth, ulg *pHeight) +{ + uch sig[8]; + + + /* first do a quick check that the file really is a PNG image; could + * have used slightly more general png_sig_cmp() function instead */ + + fread(sig, 1, 8, infile); + if (png_sig_cmp(sig, 0, 8)) + return 1; /* bad signature */ + + + /* could pass pointers to user-defined error handlers instead of NULLs: */ + + png_ptr = png_create_read_struct(png_get_libpng_ver(NULL), NULL, NULL, + NULL); + if (!png_ptr) + return 4; /* out of memory */ + + info_ptr = png_create_info_struct(png_ptr); + if (!info_ptr) { + png_destroy_read_struct(&png_ptr, NULL, NULL); + return 4; /* out of memory */ + } + + + /* we could create a second info struct here (end_info), but it's only + * useful if we want to keep pre- and post-IDAT chunk info separated + * (mainly for PNG-aware image editors and converters) */ + + + /* setjmp() must be called in every function that calls a PNG-reading + * libpng function */ + + if (setjmp(png_jmpbuf(png_ptr))) { + png_destroy_read_struct(&png_ptr, &info_ptr, NULL); + return 2; + } + + + png_init_io(png_ptr, infile); + png_set_sig_bytes(png_ptr, 8); /* we already read the 8 signature bytes */ + + png_read_info(png_ptr, info_ptr); /* read all PNG info up to image data */ + + + /* alternatively, could make separate calls to png_get_image_width(), + * etc., but want bit_depth and color_type for later [don't care about + * compression_type and filter_type => NULLs] */ + + png_get_IHDR(png_ptr, info_ptr, &width, &height, &bit_depth, &color_type, + NULL, NULL, NULL); + *pWidth = width; + *pHeight = height; + + + /* OK, that's all we need for now; return happy */ + + return 0; +} + + + + +/* returns 0 if succeeds, 1 if fails due to no bKGD chunk, 2 if libpng error; + * scales values to 8-bit if necessary */ + +int readpng_get_bgcolor(uch *red, uch *green, uch *blue) +{ + png_color_16p pBackground; + + + /* setjmp() must be called in every function that calls a PNG-reading + * libpng function */ + + if (setjmp(png_jmpbuf(png_ptr))) { + png_destroy_read_struct(&png_ptr, &info_ptr, NULL); + return 2; + } + + + if (!png_get_valid(png_ptr, info_ptr, PNG_INFO_bKGD)) + return 1; + + /* it is not obvious from the libpng documentation, but this function + * takes a pointer to a pointer, and it always returns valid red, green + * and blue values, regardless of color_type: */ + + png_get_bKGD(png_ptr, info_ptr, &pBackground); + + + /* however, it always returns the raw bKGD data, regardless of any + * bit-depth transformations, so check depth and adjust if necessary */ + + if (bit_depth == 16) { + *red = pBackground->red >> 8; + *green = pBackground->green >> 8; + *blue = pBackground->blue >> 8; + } else if (color_type == PNG_COLOR_TYPE_GRAY && bit_depth < 8) { + if (bit_depth == 1) + *red = *green = *blue = pBackground->gray? 255 : 0; + else if (bit_depth == 2) + *red = *green = *blue = (255/3) * pBackground->gray; + else /* bit_depth == 4 */ + *red = *green = *blue = (255/15) * pBackground->gray; + } else { + *red = (uch)pBackground->red; + *green = (uch)pBackground->green; + *blue = (uch)pBackground->blue; + } + + return 0; +} + + + + +/* display_exponent == LUT_exponent * CRT_exponent */ + +uch *readpng_get_image(double display_exponent, int *pChannels, ulg *pRowbytes) +{ + double gamma; + png_uint_32 i, rowbytes; + png_bytepp row_pointers = NULL; + + + /* setjmp() must be called in every function that calls a PNG-reading + * libpng function */ + + if (setjmp(png_jmpbuf(png_ptr))) { + free(image_data); + image_data = NULL; + free(row_pointers); + row_pointers = NULL; + png_destroy_read_struct(&png_ptr, &info_ptr, NULL); + return NULL; + } + + + /* expand palette images to RGB, low-bit-depth grayscale images to 8 bits, + * transparency chunks to full alpha channel; strip 16-bit-per-sample + * images to 8 bits per sample; and convert grayscale to RGB[A] */ + + if (color_type == PNG_COLOR_TYPE_PALETTE) + png_set_expand(png_ptr); + if (color_type == PNG_COLOR_TYPE_GRAY && bit_depth < 8) + png_set_expand(png_ptr); + if (png_get_valid(png_ptr, info_ptr, PNG_INFO_tRNS)) + png_set_expand(png_ptr); +#ifdef PNG_READ_16_TO_8_SUPPORTED + if (bit_depth == 16) +# ifdef PNG_READ_SCALE_16_TO_8_SUPPORTED + png_set_scale_16(png_ptr); +# else + png_set_strip_16(png_ptr); +# endif +#endif + if (color_type == PNG_COLOR_TYPE_GRAY || + color_type == PNG_COLOR_TYPE_GRAY_ALPHA) + png_set_gray_to_rgb(png_ptr); + + + /* unlike the example in the libpng documentation, we have *no* idea where + * this file may have come from--so if it doesn't have a file gamma, don't + * do any correction ("do no harm") */ + + if (png_get_gAMA(png_ptr, info_ptr, &gamma)) + png_set_gamma(png_ptr, display_exponent, gamma); + + + /* all transformations have been registered; now update info_ptr data, + * get rowbytes and channels, and allocate image memory */ + + png_read_update_info(png_ptr, info_ptr); + + *pRowbytes = rowbytes = png_get_rowbytes(png_ptr, info_ptr); + *pChannels = (int)png_get_channels(png_ptr, info_ptr); + + if ((image_data = (uch *)malloc(rowbytes*height)) == NULL) { + png_destroy_read_struct(&png_ptr, &info_ptr, NULL); + return NULL; + } + if ((row_pointers = (png_bytepp)malloc(height*sizeof(png_bytep))) == NULL) { + png_destroy_read_struct(&png_ptr, &info_ptr, NULL); + free(image_data); + image_data = NULL; + return NULL; + } + + Trace((stderr, "readpng_get_image: channels = %d, rowbytes = %ld, height = %ld\n", + *pChannels, rowbytes, height)); + + + /* set the individual row_pointers to point at the correct offsets */ + + for (i = 0; i < height; ++i) + row_pointers[i] = image_data + i*rowbytes; + + + /* now we can go ahead and just read the whole image */ + + png_read_image(png_ptr, row_pointers); + + + /* and we're done! (png_read_end() can be omitted if no processing of + * post-IDAT text/time/etc. is desired) */ + + free(row_pointers); + row_pointers = NULL; + + png_read_end(png_ptr, NULL); + + return image_data; +} + + +void readpng_cleanup(int free_image_data) +{ + if (free_image_data && image_data) { + free(image_data); + image_data = NULL; + } + + if (png_ptr && info_ptr) { + png_destroy_read_struct(&png_ptr, &info_ptr, NULL); + png_ptr = NULL; + info_ptr = NULL; + } +} diff --git a/compat/libpng/contrib/gregbook/readpng.h b/compat/libpng/contrib/gregbook/readpng.h new file mode 100755 index 0000000..ec6b483 --- /dev/null +++ b/compat/libpng/contrib/gregbook/readpng.h @@ -0,0 +1,88 @@ +/*--------------------------------------------------------------------------- + + rpng - simple PNG display program readpng.h + + --------------------------------------------------------------------------- + + Copyright (c) 1998-2007 Greg Roelofs. All rights reserved. + + This software is provided "as is," without warranty of any kind, + express or implied. In no event shall the author or contributors + be held liable for any damages arising in any way from the use of + this software. + + The contents of this file are DUAL-LICENSED. You may modify and/or + redistribute this software according to the terms of one of the + following two licenses (at your option): + + + LICENSE 1 ("BSD-like with advertising clause"): + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute + it freely, subject to the following restrictions: + + 1. Redistributions of source code must retain the above copyright + notice, disclaimer, and this list of conditions. + 2. Redistributions in binary form must reproduce the above copyright + notice, disclaimer, and this list of conditions in the documenta- + tion and/or other materials provided with the distribution. + 3. All advertising materials mentioning features or use of this + software must display the following acknowledgment: + + This product includes software developed by Greg Roelofs + and contributors for the book, "PNG: The Definitive Guide," + published by O'Reilly and Associates. + + + LICENSE 2 (GNU GPL v2 or later): + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software Foundation, + Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + ---------------------------------------------------------------------------*/ + +#ifndef TRUE +# define TRUE 1 +# define FALSE 0 +#endif + +#ifndef MAX +# define MAX(a,b) ((a) > (b)? (a) : (b)) +# define MIN(a,b) ((a) < (b)? (a) : (b)) +#endif + +#ifdef DEBUG +# define Trace(x) {fprintf x ; fflush(stderr); fflush(stdout);} +#else +# define Trace(x) ; +#endif + +typedef unsigned char uch; +typedef unsigned short ush; +typedef unsigned long ulg; + + +/* prototypes for public functions in readpng.c */ + +void readpng_version_info(void); + +int readpng_init(FILE *infile, ulg *pWidth, ulg *pHeight); + +int readpng_get_bgcolor(uch *bg_red, uch *bg_green, uch *bg_blue); + +uch *readpng_get_image(double display_exponent, int *pChannels, + ulg *pRowbytes); + +void readpng_cleanup(int free_image_data); diff --git a/compat/libpng/contrib/gregbook/readpng2.c b/compat/libpng/contrib/gregbook/readpng2.c new file mode 100755 index 0000000..5cc1919 --- /dev/null +++ b/compat/libpng/contrib/gregbook/readpng2.c @@ -0,0 +1,520 @@ +/*--------------------------------------------------------------------------- + + rpng2 - progressive-model PNG display program readpng2.c + + --------------------------------------------------------------------------- + + Copyright (c) 1998-2015 Greg Roelofs. All rights reserved. + + This software is provided "as is," without warranty of any kind, + express or implied. In no event shall the author or contributors + be held liable for any damages arising in any way from the use of + this software. + + The contents of this file are DUAL-LICENSED. You may modify and/or + redistribute this software according to the terms of one of the + following two licenses (at your option): + + + LICENSE 1 ("BSD-like with advertising clause"): + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute + it freely, subject to the following restrictions: + + 1. Redistributions of source code must retain the above copyright + notice, disclaimer, and this list of conditions. + 2. Redistributions in binary form must reproduce the above copyright + notice, disclaimer, and this list of conditions in the documenta- + tion and/or other materials provided with the distribution. + 3. All advertising materials mentioning features or use of this + software must display the following acknowledgment: + + This product includes software developed by Greg Roelofs + and contributors for the book, "PNG: The Definitive Guide," + published by O'Reilly and Associates. + + + LICENSE 2 (GNU GPL v2 or later): + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software Foundation, + Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + --------------------------------------------------------------------------- + + Changelog: + %RDATE% - Check return value of png_get_bKGD() (Glenn R-P) + + ---------------------------------------------------------------------------*/ + + +#include /* for exit() prototype */ +#include + +#include +#include "png.h" /* libpng header from the local directory */ +#include "readpng2.h" /* typedefs, common macros, public prototypes */ + + +/* local prototypes */ + +static void readpng2_info_callback(png_structp png_ptr, png_infop info_ptr); +static void readpng2_row_callback(png_structp png_ptr, png_bytep new_row, + png_uint_32 row_num, int pass); +static void readpng2_end_callback(png_structp png_ptr, png_infop info_ptr); +static void readpng2_error_handler(png_structp png_ptr, png_const_charp msg); +static void readpng2_warning_handler(png_structp png_ptr, png_const_charp msg); + + + + +void readpng2_version_info(void) +{ + fprintf(stderr, " Compiled with libpng %s; using libpng %s\n", + PNG_LIBPNG_VER_STRING, png_libpng_ver); + + fprintf(stderr, " and with zlib %s; using zlib %s.\n", + ZLIB_VERSION, zlib_version); +} + + + + +int readpng2_check_sig(uch *sig, int num) +{ + return !png_sig_cmp(sig, 0, num); +} + + + + +/* returns 0 for success, 2 for libpng problem, 4 for out of memory */ + +int readpng2_init(mainprog_info *mainprog_ptr) +{ + png_structp png_ptr; /* note: temporary variables! */ + png_infop info_ptr; + + + /* could also replace libpng warning-handler (final NULL), but no need: */ + + png_ptr = png_create_read_struct(png_get_libpng_ver(NULL), mainprog_ptr, + readpng2_error_handler, readpng2_warning_handler); + if (!png_ptr) + return 4; /* out of memory */ + + info_ptr = png_create_info_struct(png_ptr); + if (!info_ptr) { + png_destroy_read_struct(&png_ptr, NULL, NULL); + return 4; /* out of memory */ + } + + + /* we could create a second info struct here (end_info), but it's only + * useful if we want to keep pre- and post-IDAT chunk info separated + * (mainly for PNG-aware image editors and converters) */ + + + /* setjmp() must be called in every function that calls a PNG-reading + * libpng function, unless an alternate error handler was installed-- + * but compatible error handlers must either use longjmp() themselves + * (as in this program) or exit immediately, so here we are: */ + + if (setjmp(mainprog_ptr->jmpbuf)) { + png_destroy_read_struct(&png_ptr, &info_ptr, NULL); + return 2; + } + + +#ifdef PNG_HANDLE_AS_UNKNOWN_SUPPORTED + /* prepare the reader to ignore all recognized chunks whose data won't be + * used, i.e., all chunks recognized by libpng except for IHDR, PLTE, IDAT, + * IEND, tRNS, bKGD, gAMA, and sRGB (small performance improvement) */ + { + /* These byte strings were copied from png.h. If a future version + * of readpng2.c recognizes more chunks, add them to this list. + */ + static PNG_CONST png_byte chunks_to_process[] = { + 98, 75, 71, 68, '\0', /* bKGD */ + 103, 65, 77, 65, '\0', /* gAMA */ + 115, 82, 71, 66, '\0', /* sRGB */ + }; + + /* Ignore all chunks except for IHDR, PLTE, tRNS, IDAT, and IEND */ + png_set_keep_unknown_chunks(png_ptr, -1 /* PNG_HANDLE_CHUNK_NEVER */, + NULL, -1); + + /* But do not ignore chunks in the "chunks_to_process" list */ + png_set_keep_unknown_chunks(png_ptr, + 0 /* PNG_HANDLE_CHUNK_AS_DEFAULT */, chunks_to_process, + sizeof(chunks_to_process)/5); + } +#endif /* PNG_HANDLE_AS_UNKNOWN_SUPPORTED */ + + + /* instead of doing png_init_io() here, now we set up our callback + * functions for progressive decoding */ + + png_set_progressive_read_fn(png_ptr, mainprog_ptr, + readpng2_info_callback, readpng2_row_callback, readpng2_end_callback); + + + /* make sure we save our pointers for use in readpng2_decode_data() */ + + mainprog_ptr->png_ptr = png_ptr; + mainprog_ptr->info_ptr = info_ptr; + + + /* and that's all there is to initialization */ + + return 0; +} + + + + +/* returns 0 for success, 2 for libpng (longjmp) problem */ + +int readpng2_decode_data(mainprog_info *mainprog_ptr, uch *rawbuf, ulg length) +{ + png_structp png_ptr = (png_structp)mainprog_ptr->png_ptr; + png_infop info_ptr = (png_infop)mainprog_ptr->info_ptr; + + + /* setjmp() must be called in every function that calls a PNG-reading + * libpng function */ + + if (setjmp(mainprog_ptr->jmpbuf)) { + png_destroy_read_struct(&png_ptr, &info_ptr, NULL); + mainprog_ptr->png_ptr = NULL; + mainprog_ptr->info_ptr = NULL; + return 2; + } + + + /* hand off the next chunk of input data to libpng for decoding */ + + png_process_data(png_ptr, info_ptr, rawbuf, length); + + return 0; +} + + + + +static void readpng2_info_callback(png_structp png_ptr, png_infop info_ptr) +{ + mainprog_info *mainprog_ptr; + int color_type, bit_depth; + png_uint_32 width, height; +#ifdef PNG_FLOATING_POINT_SUPPORTED + double gamma; +#else + png_fixed_point gamma; +#endif + + + /* setjmp() doesn't make sense here, because we'd either have to exit(), + * longjmp() ourselves, or return control to libpng, which doesn't want + * to see us again. By not doing anything here, libpng will instead jump + * to readpng2_decode_data(), which can return an error value to the main + * program. */ + + + /* retrieve the pointer to our special-purpose struct, using the png_ptr + * that libpng passed back to us (i.e., not a global this time--there's + * no real difference for a single image, but for a multithreaded browser + * decoding several PNG images at the same time, one needs to avoid mixing + * up different images' structs) */ + + mainprog_ptr = png_get_progressive_ptr(png_ptr); + + if (mainprog_ptr == NULL) { /* we be hosed */ + fprintf(stderr, + "readpng2 error: main struct not recoverable in info_callback.\n"); + fflush(stderr); + return; + /* + * Alternatively, we could call our error-handler just like libpng + * does, which would effectively terminate the program. Since this + * can only happen if png_ptr gets redirected somewhere odd or the + * main PNG struct gets wiped, we're probably toast anyway. (If + * png_ptr itself is NULL, we would not have been called.) + */ + } + + + /* this is just like in the non-progressive case */ + + png_get_IHDR(png_ptr, info_ptr, &width, &height, &bit_depth, &color_type, + NULL, NULL, NULL); + mainprog_ptr->width = (ulg)width; + mainprog_ptr->height = (ulg)height; + + + /* since we know we've read all of the PNG file's "header" (i.e., up + * to IDAT), we can check for a background color here */ + + if (mainprog_ptr->need_bgcolor) + { + png_color_16p pBackground; + + /* it is not obvious from the libpng documentation, but this function + * takes a pointer to a pointer, and it always returns valid red, + * green and blue values, regardless of color_type: */ + if (png_get_bKGD(png_ptr, info_ptr, &pBackground)) + { + + /* however, it always returns the raw bKGD data, regardless of any + * bit-depth transformations, so check depth and adjust if necessary + */ + if (bit_depth == 16) { + mainprog_ptr->bg_red = pBackground->red >> 8; + mainprog_ptr->bg_green = pBackground->green >> 8; + mainprog_ptr->bg_blue = pBackground->blue >> 8; + } else if (color_type == PNG_COLOR_TYPE_GRAY && bit_depth < 8) { + if (bit_depth == 1) + mainprog_ptr->bg_red = mainprog_ptr->bg_green = + mainprog_ptr->bg_blue = pBackground->gray? 255 : 0; + else if (bit_depth == 2) + mainprog_ptr->bg_red = mainprog_ptr->bg_green = + mainprog_ptr->bg_blue = (255/3) * pBackground->gray; + else /* bit_depth == 4 */ + mainprog_ptr->bg_red = mainprog_ptr->bg_green = + mainprog_ptr->bg_blue = (255/15) * pBackground->gray; + } else { + mainprog_ptr->bg_red = (uch)pBackground->red; + mainprog_ptr->bg_green = (uch)pBackground->green; + mainprog_ptr->bg_blue = (uch)pBackground->blue; + } + } + } + + + /* as before, let libpng expand palette images to RGB, low-bit-depth + * grayscale images to 8 bits, transparency chunks to full alpha channel; + * strip 16-bit-per-sample images to 8 bits per sample; and convert + * grayscale to RGB[A] */ + + if (color_type == PNG_COLOR_TYPE_PALETTE) + png_set_expand(png_ptr); + if (color_type == PNG_COLOR_TYPE_GRAY && bit_depth < 8) + png_set_expand(png_ptr); + if (png_get_valid(png_ptr, info_ptr, PNG_INFO_tRNS)) + png_set_expand(png_ptr); +#ifdef PNG_READ_16_TO_8_SUPPORTED + if (bit_depth == 16) +# ifdef PNG_READ_SCALE_16_TO_8_SUPPORTED + png_set_scale_16(png_ptr); +# else + png_set_strip_16(png_ptr); +# endif +#endif + if (color_type == PNG_COLOR_TYPE_GRAY || + color_type == PNG_COLOR_TYPE_GRAY_ALPHA) + png_set_gray_to_rgb(png_ptr); + + + /* Unlike the basic viewer, which was designed to operate on local files, + * this program is intended to simulate a web browser--even though we + * actually read from a local file, too. But because we are pretending + * that most of the images originate on the Internet, we follow the recom- + * mendation of the sRGB proposal and treat unlabelled images (no gAMA + * chunk) as existing in the sRGB color space. That is, we assume that + * such images have a file gamma of 0.45455, which corresponds to a PC-like + * display system. This change in assumptions will have no effect on a + * PC-like system, but on a Mac, SGI, NeXT or other system with a non- + * identity lookup table, it will darken unlabelled images, which effec- + * tively favors images from PC-like systems over those originating on + * the local platform. Note that mainprog_ptr->display_exponent is the + * "gamma" value for the entire display system, i.e., the product of + * LUT_exponent and CRT_exponent. */ + +#ifdef PNG_FLOATING_POINT_SUPPORTED + if (png_get_gAMA(png_ptr, info_ptr, &gamma)) + png_set_gamma(png_ptr, mainprog_ptr->display_exponent, gamma); + else + png_set_gamma(png_ptr, mainprog_ptr->display_exponent, 0.45455); +#else + if (png_get_gAMA_fixed(png_ptr, info_ptr, &gamma)) + png_set_gamma_fixed(png_ptr, + (png_fixed_point)(100000*mainprog_ptr->display_exponent+.5), gamma); + else + png_set_gamma_fixed(png_ptr, + (png_fixed_point)(100000*mainprog_ptr->display_exponent+.5), 45455); +#endif + + /* we'll let libpng expand interlaced images, too */ + + mainprog_ptr->passes = png_set_interlace_handling(png_ptr); + + + /* all transformations have been registered; now update info_ptr data and + * then get rowbytes and channels */ + + png_read_update_info(png_ptr, info_ptr); + + mainprog_ptr->rowbytes = (int)png_get_rowbytes(png_ptr, info_ptr); + mainprog_ptr->channels = png_get_channels(png_ptr, info_ptr); + + + /* Call the main program to allocate memory for the image buffer and + * initialize windows and whatnot. (The old-style function-pointer + * invocation is used for compatibility with a few supposedly ANSI + * compilers that nevertheless barf on "fn_ptr()"-style syntax.) */ + + (*mainprog_ptr->mainprog_init)(); + + + /* and that takes care of initialization */ + + return; +} + + + + + +static void readpng2_row_callback(png_structp png_ptr, png_bytep new_row, + png_uint_32 row_num, int pass) +{ + mainprog_info *mainprog_ptr; + + + /* first check whether the row differs from the previous pass; if not, + * nothing to combine or display */ + + if (!new_row) + return; + + + /* retrieve the pointer to our special-purpose struct so we can access + * the old rows and image-display callback function */ + + mainprog_ptr = png_get_progressive_ptr(png_ptr); + + + /* save the pass number for optional use by the front end */ + + mainprog_ptr->pass = pass; + + + /* have libpng either combine the new row data with the existing row data + * from previous passes (if interlaced) or else just copy the new row + * into the main program's image buffer */ + + png_progressive_combine_row(png_ptr, mainprog_ptr->row_pointers[row_num], + new_row); + + + /* finally, call the display routine in the main program with the number + * of the row we just updated */ + + (*mainprog_ptr->mainprog_display_row)(row_num); + + + /* and we're ready for more */ + + return; +} + + + + + +static void readpng2_end_callback(png_structp png_ptr, png_infop info_ptr) +{ + mainprog_info *mainprog_ptr; + + + /* retrieve the pointer to our special-purpose struct */ + + mainprog_ptr = png_get_progressive_ptr(png_ptr); + + + /* let the main program know that it should flush any buffered image + * data to the display now and set a "done" flag or whatever, but note + * that it SHOULD NOT DESTROY THE PNG STRUCTS YET--in other words, do + * NOT call readpng2_cleanup() either here or in the finish_display() + * routine; wait until control returns to the main program via + * readpng2_decode_data() */ + + (*mainprog_ptr->mainprog_finish_display)(); + + + /* all done */ + + (void)info_ptr; /* Unused */ + + return; +} + + + + + +void readpng2_cleanup(mainprog_info *mainprog_ptr) +{ + png_structp png_ptr = (png_structp)mainprog_ptr->png_ptr; + png_infop info_ptr = (png_infop)mainprog_ptr->info_ptr; + + if (png_ptr && info_ptr) + png_destroy_read_struct(&png_ptr, &info_ptr, NULL); + + mainprog_ptr->png_ptr = NULL; + mainprog_ptr->info_ptr = NULL; +} + + +static void readpng2_warning_handler(png_structp png_ptr, png_const_charp msg) +{ + fprintf(stderr, "readpng2 libpng warning: %s\n", msg); + fflush(stderr); + (void)png_ptr; /* Unused */ +} + + +static void readpng2_error_handler(png_structp png_ptr, png_const_charp msg) +{ + mainprog_info *mainprog_ptr; + + /* This function, aside from the extra step of retrieving the "error + * pointer" (below) and the fact that it exists within the application + * rather than within libpng, is essentially identical to libpng's + * default error handler. The second point is critical: since both + * setjmp() and longjmp() are called from the same code, they are + * guaranteed to have compatible notions of how big a jmp_buf is, + * regardless of whether _BSD_SOURCE or anything else has (or has not) + * been defined. */ + + fprintf(stderr, "readpng2 libpng error: %s\n", msg); + fflush(stderr); + + mainprog_ptr = png_get_error_ptr(png_ptr); + if (mainprog_ptr == NULL) { /* we are completely hosed now */ + fprintf(stderr, + "readpng2 severe error: jmpbuf not recoverable; terminating.\n"); + fflush(stderr); + exit(99); + } + + /* Now we have our data structure we can use the information in it + * to return control to our own higher level code (all the points + * where 'setjmp' is called in this file.) This will work with other + * error handling mechanisms as well - libpng always calls png_error + * when it can proceed no further, thus, so long as the error handler + * is intercepted, application code can do its own error recovery. + */ + longjmp(mainprog_ptr->jmpbuf, 1); +} diff --git a/compat/libpng/contrib/gregbook/readpng2.h b/compat/libpng/contrib/gregbook/readpng2.h new file mode 100755 index 0000000..7a59263 --- /dev/null +++ b/compat/libpng/contrib/gregbook/readpng2.h @@ -0,0 +1,116 @@ +/*--------------------------------------------------------------------------- + + rpng2 - progressive-model PNG display program readpng2.h + + --------------------------------------------------------------------------- + + Copyright (c) 1998-2008 Greg Roelofs. All rights reserved. + + This software is provided "as is," without warranty of any kind, + express or implied. In no event shall the author or contributors + be held liable for any damages arising in any way from the use of + this software. + + The contents of this file are DUAL-LICENSED. You may modify and/or + redistribute this software according to the terms of one of the + following two licenses (at your option): + + + LICENSE 1 ("BSD-like with advertising clause"): + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute + it freely, subject to the following restrictions: + + 1. Redistributions of source code must retain the above copyright + notice, disclaimer, and this list of conditions. + 2. Redistributions in binary form must reproduce the above copyright + notice, disclaimer, and this list of conditions in the documenta- + tion and/or other materials provided with the distribution. + 3. All advertising materials mentioning features or use of this + software must display the following acknowledgment: + + This product includes software developed by Greg Roelofs + and contributors for the book, "PNG: The Definitive Guide," + published by O'Reilly and Associates. + + + LICENSE 2 (GNU GPL v2 or later): + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software Foundation, + Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + ---------------------------------------------------------------------------*/ + +#ifndef TRUE +# define TRUE 1 +# define FALSE 0 +#endif + +#ifndef MAX +# define MAX(a,b) ((a) > (b)? (a) : (b)) +# define MIN(a,b) ((a) < (b)? (a) : (b)) +#endif + +#ifdef DEBUG +# define Trace(x) {fprintf x ; fflush(stderr); fflush(stdout);} +#else +# define Trace(x) ; +#endif + +enum rpng2_states { + kPreInit = 0, + kWindowInit, + kDone +}; + +typedef unsigned char uch; +typedef unsigned short ush; +typedef unsigned long ulg; + +typedef struct _mainprog_info { + double display_exponent; + ulg width; + ulg height; + void *png_ptr; + void *info_ptr; + void (*mainprog_init)(void); + void (*mainprog_display_row)(ulg row_num); + void (*mainprog_finish_display)(void); + uch *image_data; + uch **row_pointers; + jmp_buf jmpbuf; + int passes; /* not used */ + int pass; + int rowbytes; + int channels; + int need_bgcolor; + int state; + uch bg_red; + uch bg_green; + uch bg_blue; +} mainprog_info; + + +/* prototypes for public functions in readpng2.c */ + +void readpng2_version_info(void); + +int readpng2_check_sig(uch *sig, int num); + +int readpng2_init(mainprog_info *mainprog_ptr); + +int readpng2_decode_data(mainprog_info *mainprog_ptr, uch *rawbuf, ulg length); + +void readpng2_cleanup(mainprog_info *mainprog_ptr); diff --git a/compat/libpng/contrib/gregbook/readppm.c b/compat/libpng/contrib/gregbook/readppm.c new file mode 100755 index 0000000..01772d3 --- /dev/null +++ b/compat/libpng/contrib/gregbook/readppm.c @@ -0,0 +1,183 @@ +/*--------------------------------------------------------------------------- + + rpng - simple PNG display program readppm.c + + --------------------------------------------------------------------------- + + This is a special-purpose replacement for readpng.c that allows binary + PPM files to be used in place of PNG images. + + --------------------------------------------------------------------------- + + Copyright (c) 1998-2007 Greg Roelofs. All rights reserved. + + This software is provided "as is," without warranty of any kind, + express or implied. In no event shall the author or contributors + be held liable for any damages arising in any way from the use of + this software. + + The contents of this file are DUAL-LICENSED. You may modify and/or + redistribute this software according to the terms of one of the + following two licenses (at your option): + + + LICENSE 1 ("BSD-like with advertising clause"): + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute + it freely, subject to the following restrictions: + + 1. Redistributions of source code must retain the above copyright + notice, disclaimer, and this list of conditions. + 2. Redistributions in binary form must reproduce the above copyright + notice, disclaimer, and this list of conditions in the documenta- + tion and/or other materials provided with the distribution. + 3. All advertising materials mentioning features or use of this + software must display the following acknowledgment: + + This product includes software developed by Greg Roelofs + and contributors for the book, "PNG: The Definitive Guide," + published by O'Reilly and Associates. + + + LICENSE 2 (GNU GPL v2 or later): + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software Foundation, + Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + ---------------------------------------------------------------------------*/ + +#include +#include + +#include "readpng.h" /* typedefs, common macros, public prototypes */ + + +ulg width, height; +int bit_depth, color_type, channels; +uch *image_data = NULL; +FILE *saved_infile; + + +void readpng_version_info() +{ + fprintf(stderr, " Compiled without libpng, zlib or PBMPLUS/NetPBM.\n"); +} + + +/* return value = 0 for success, 1 for bad sig, 2 for bad IHDR, 4 for no mem */ + +int readpng_init(FILE *infile, ulg *pWidth, ulg *pHeight) +{ + static uch ppmline[256]; + int maxval; + + + saved_infile = infile; + + fgets(ppmline, 256, infile); + if (ppmline[0] != 'P' || ppmline[1] != '6') { + fprintf(stderr, "ERROR: not a PPM file\n"); + return 1; + } + /* possible color types: P5 = grayscale (0), P6 = RGB (2), P8 = RGBA (6) */ + if (ppmline[1] == '6') { + color_type = 2; + channels = 3; + } else if (ppmline[1] == '8') { + color_type = 6; + channels = 4; + } else /* if (ppmline[1] == '5') */ { + color_type = 0; + channels = 1; + } + + do { + fgets(ppmline, 256, infile); + } while (ppmline[0] == '#'); + sscanf(ppmline, "%lu %lu", &width, &height); + + do { + fgets(ppmline, 256, infile); + } while (ppmline[0] == '#'); + sscanf(ppmline, "%d", &maxval); + if (maxval != 255) { + fprintf(stderr, "ERROR: maxval = %d\n", maxval); + return 2; + } + bit_depth = 8; + + *pWidth = width; + *pHeight = height; + + return 0; +} + + + + +/* returns 0 if succeeds, 1 if fails due to no bKGD chunk, 2 if libpng error; + * scales values to 8-bit if necessary */ + +int readpng_get_bgcolor(uch *red, uch *green, uch *blue) +{ + return 1; +} + + + + +/* display_exponent == LUT_exponent * CRT_exponent */ + +uch *readpng_get_image(double display_exponent, int *pChannels, ulg *pRowbytes) +{ + ulg rowbytes; + + + /* expand palette images to RGB, low-bit-depth grayscale images to 8 bits, + * transparency chunks to full alpha channel; strip 16-bit-per-sample + * images to 8 bits per sample; and convert grayscale to RGB[A] */ + + /* GRR WARNING: grayscale needs to be expanded and channels reset! */ + + *pRowbytes = rowbytes = channels*width; + *pChannels = channels; + + if ((image_data = (uch *)malloc(rowbytes*height)) == NULL) { + return NULL; + } + + Trace((stderr, "readpng_get_image: rowbytes = %ld, height = %ld\n", rowbytes, height)); + + + /* now we can go ahead and just read the whole image */ + + if (fread(image_data, 1L, rowbytes*height, saved_infile) < + rowbytes*height) { + free (image_data); + image_data = NULL; + return NULL; + } + + return image_data; +} + + +void readpng_cleanup(int free_image_data) +{ + if (free_image_data && image_data) { + free(image_data); + image_data = NULL; + } +} diff --git a/compat/libpng/contrib/gregbook/rpng-win.c b/compat/libpng/contrib/gregbook/rpng-win.c new file mode 100755 index 0000000..1c22282 --- /dev/null +++ b/compat/libpng/contrib/gregbook/rpng-win.c @@ -0,0 +1,728 @@ +/*--------------------------------------------------------------------------- + + rpng - simple PNG display program rpng-win.c + + This program decodes and displays PNG images, with gamma correction and + optionally with a user-specified background color (in case the image has + transparency). It is very nearly the most basic PNG viewer possible. + This version is for 32-bit Windows; it may compile under 16-bit Windows + with a little tweaking (or maybe not). + + to do: + - handle quoted command-line args (especially filenames with spaces) + - have minimum window width: oh well + - use %.1023s to simplify truncation of title-bar string? + + --------------------------------------------------------------------------- + + Changelog: + - 1.00: initial public release + - 1.01: modified to allow abbreviated options; fixed long/ulong mis- + match; switched to png_jmpbuf() macro + - 1.02: added extra set of parentheses to png_jmpbuf() macro; fixed + command-line parsing bug + - 1.10: enabled "message window"/console (thanks to David Geldreich) + - 2.00: dual-licensed (added GNU GPL) + - 2.01: fixed improper display of usage screen on PNG error(s) + + --------------------------------------------------------------------------- + + Copyright (c) 1998-2008 Greg Roelofs. All rights reserved. + + This software is provided "as is," without warranty of any kind, + express or implied. In no event shall the author or contributors + be held liable for any damages arising in any way from the use of + this software. + + The contents of this file are DUAL-LICENSED. You may modify and/or + redistribute this software according to the terms of one of the + following two licenses (at your option): + + + LICENSE 1 ("BSD-like with advertising clause"): + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute + it freely, subject to the following restrictions: + + 1. Redistributions of source code must retain the above copyright + notice, disclaimer, and this list of conditions. + 2. Redistributions in binary form must reproduce the above copyright + notice, disclaimer, and this list of conditions in the documenta- + tion and/or other materials provided with the distribution. + 3. All advertising materials mentioning features or use of this + software must display the following acknowledgment: + + This product includes software developed by Greg Roelofs + and contributors for the book, "PNG: The Definitive Guide," + published by O'Reilly and Associates. + + + LICENSE 2 (GNU GPL v2 or later): + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software Foundation, + Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + ---------------------------------------------------------------------------*/ + +#define PROGNAME "rpng-win" +#define LONGNAME "Simple PNG Viewer for Windows" +#define VERSION "2.01 of 16 March 2008" + +#include +#include +#include +#include +#include +#ifdef __CYGWIN__ +/* getch replacement. Turns out, we don't really need this, + * but leave it here if we ever enable any of the uses of + * _getch in the main code + */ +#include +#include +#include +int repl_getch( void ) +{ + char ch; + int fd = fileno(stdin); + struct termio old_tty, new_tty; + + ioctl(fd, TCGETA, &old_tty); + new_tty = old_tty; + new_tty.c_lflag &= ~(ICANON | ECHO | ISIG); + ioctl(fd, TCSETA, &new_tty); + fread(&ch, 1, sizeof(ch), stdin); + ioctl(fd, TCSETA, &old_tty); + + return ch; +} +#define _getch repl_getch +#else +#include /* only for _getch() */ +#endif + +/* #define DEBUG : this enables the Trace() macros */ + +#include "readpng.h" /* typedefs, common macros, readpng prototypes */ + + +/* could just include png.h, but this macro is the only thing we need + * (name and typedefs changed to local versions); note that side effects + * only happen with alpha (which could easily be avoided with + * "ush acopy = (alpha);") */ + +#define alpha_composite(composite, fg, alpha, bg) { \ + ush temp = ((ush)(fg)*(ush)(alpha) + \ + (ush)(bg)*(ush)(255 - (ush)(alpha)) + (ush)128); \ + (composite) = (uch)((temp + (temp >> 8)) >> 8); \ +} + + +/* local prototypes */ +static int rpng_win_create_window(HINSTANCE hInst, int showmode); +static int rpng_win_display_image(void); +static void rpng_win_cleanup(void); +LRESULT CALLBACK rpng_win_wndproc(HWND, UINT, WPARAM, LPARAM); + + +static char titlebar[1024]; +static char *progname = PROGNAME; +static char *appname = LONGNAME; +static char *filename; +static FILE *infile; + +static char *bgstr; +static uch bg_red=0, bg_green=0, bg_blue=0; + +static double display_exponent; + +static ulg image_width, image_height, image_rowbytes; +static int image_channels; +static uch *image_data; + +/* Windows-specific variables */ +static ulg wimage_rowbytes; +static uch *dib; +static uch *wimage_data; +static BITMAPINFOHEADER *bmih; + +static HWND global_hwnd; + + + + +int WINAPI WinMain(HINSTANCE hInst, HINSTANCE hPrevInst, PSTR cmd, int showmode) +{ + char *args[1024]; /* arbitrary limit, but should suffice */ + char *p, *q, **argv = args; + int argc = 0; + int rc, alen, flen; + int error = 0; + int have_bg = FALSE; + double LUT_exponent; /* just the lookup table */ + double CRT_exponent = 2.2; /* just the monitor */ + double default_display_exponent; /* whole display system */ + MSG msg; + + + filename = (char *)NULL; + +#ifndef __CYGWIN__ + /* First reenable console output, which normally goes to the bit bucket + * for windowed apps. Closing the console window will terminate the + * app. Thanks to David.Geldreich@realviz.com for supplying the magical + * incantation. */ + + AllocConsole(); + freopen("CONOUT$", "a", stderr); + freopen("CONOUT$", "a", stdout); +#endif + + + /* Next set the default value for our display-system exponent, i.e., + * the product of the CRT exponent and the exponent corresponding to + * the frame-buffer's lookup table (LUT), if any. This is not an + * exhaustive list of LUT values (e.g., OpenStep has a lot of weird + * ones), but it should cover 99% of the current possibilities. And + * yes, these ifdefs are completely wasted in a Windows program... */ + +#if defined(NeXT) + LUT_exponent = 1.0 / 2.2; + /* + if (some_next_function_that_returns_gamma(&next_gamma)) + LUT_exponent = 1.0 / next_gamma; + */ +#elif defined(sgi) + LUT_exponent = 1.0 / 1.7; + /* there doesn't seem to be any documented function to get the + * "gamma" value, so we do it the hard way */ + infile = fopen("/etc/config/system.glGammaVal", "r"); + if (infile) { + double sgi_gamma; + + fgets(tmpline, 80, infile); + fclose(infile); + sgi_gamma = atof(tmpline); + if (sgi_gamma > 0.0) + LUT_exponent = 1.0 / sgi_gamma; + } +#elif defined(Macintosh) + LUT_exponent = 1.8 / 2.61; + /* + if (some_mac_function_that_returns_gamma(&mac_gamma)) + LUT_exponent = mac_gamma / 2.61; + */ +#else + LUT_exponent = 1.0; /* assume no LUT: most PCs */ +#endif + + /* the defaults above give 1.0, 1.3, 1.5 and 2.2, respectively: */ + default_display_exponent = LUT_exponent * CRT_exponent; + + + /* If the user has set the SCREEN_GAMMA environment variable as suggested + * (somewhat imprecisely) in the libpng documentation, use that; otherwise + * use the default value we just calculated. Either way, the user may + * override this via a command-line option. */ + + if ((p = getenv("SCREEN_GAMMA")) != NULL) + display_exponent = atof(p); + else + display_exponent = default_display_exponent; + + + /* Windows really hates command lines, so we have to set up our own argv. + * Note that we do NOT bother with quoted arguments here, so don't use + * filenames with spaces in 'em! */ + + argv[argc++] = PROGNAME; + p = cmd; + for (;;) { + if (*p == ' ') + while (*++p == ' ') + ; + /* now p points at the first non-space after some spaces */ + if (*p == '\0') + break; /* nothing after the spaces: done */ + argv[argc++] = q = p; + while (*q && *q != ' ') + ++q; + /* now q points at a space or the end of the string */ + if (*q == '\0') + break; /* last argv already terminated; quit */ + *q = '\0'; /* change space to terminator */ + p = q + 1; + } + argv[argc] = NULL; /* terminate the argv array itself */ + + + /* Now parse the command line for options and the PNG filename. */ + + while (*++argv && !error) { + if (!strncmp(*argv, "-gamma", 2)) { + if (!*++argv) + ++error; + else { + display_exponent = atof(*argv); + if (display_exponent <= 0.0) + ++error; + } + } else if (!strncmp(*argv, "-bgcolor", 2)) { + if (!*++argv) + ++error; + else { + bgstr = *argv; + if (strlen(bgstr) != 7 || bgstr[0] != '#') + ++error; + else + have_bg = TRUE; + } + } else { + if (**argv != '-') { + filename = *argv; + if (argv[1]) /* shouldn't be any more args after filename */ + ++error; + } else + ++error; /* not expecting any other options */ + } + } + + if (!filename) + ++error; + + + /* print usage screen if any errors up to this point */ + + if (error) { +#ifndef __CYGWIN__ + int ch; +#endif + + fprintf(stderr, "\n%s %s: %s\n\n", PROGNAME, VERSION, appname); + readpng_version_info(); + fprintf(stderr, "\n" + "Usage: %s [-gamma exp] [-bgcolor bg] file.png\n" + " exp \ttransfer-function exponent (``gamma'') of the display\n" + "\t\t system in floating-point format (e.g., ``%.1f''); equal\n" + "\t\t to the product of the lookup-table exponent (varies)\n" + "\t\t and the CRT exponent (usually 2.2); must be positive\n" + " bg \tdesired background color in 7-character hex RGB format\n" + "\t\t (e.g., ``#ff7700'' for orange: same as HTML colors);\n" + "\t\t used with transparent images\n" + "\nPress Q, Esc or mouse button 1 after image is displayed to quit.\n" +#ifndef __CYGWIN__ + "Press Q or Esc to quit this usage screen.\n" +#endif + "\n", PROGNAME, default_display_exponent); +#ifndef __CYGWIN__ + do + ch = _getch(); + while (ch != 'q' && ch != 'Q' && ch != 0x1B); +#endif + exit(1); + } + + + if (!(infile = fopen(filename, "rb"))) { + fprintf(stderr, PROGNAME ": can't open PNG file [%s]\n", filename); + ++error; + } else { + if ((rc = readpng_init(infile, &image_width, &image_height)) != 0) { + switch (rc) { + case 1: + fprintf(stderr, PROGNAME + ": [%s] is not a PNG file: incorrect signature\n", + filename); + break; + case 2: + fprintf(stderr, PROGNAME + ": [%s] has bad IHDR (libpng longjmp)\n", filename); + break; + case 4: + fprintf(stderr, PROGNAME ": insufficient memory\n"); + break; + default: + fprintf(stderr, PROGNAME + ": unknown readpng_init() error\n"); + break; + } + ++error; + } + if (error) + fclose(infile); + } + + + if (error) { +#ifndef __CYGWIN__ + int ch; +#endif + + fprintf(stderr, PROGNAME ": aborting.\n"); +#ifndef __CYGWIN__ + do + ch = _getch(); + while (ch != 'q' && ch != 'Q' && ch != 0x1B); +#endif + exit(2); + } else { + fprintf(stderr, "\n%s %s: %s\n", PROGNAME, VERSION, appname); +#ifndef __CYGWIN__ + fprintf(stderr, + "\n [console window: closing this window will terminate %s]\n\n", + PROGNAME); +#endif + } + + + /* set the title-bar string, but make sure buffer doesn't overflow */ + + alen = strlen(appname); + flen = strlen(filename); + if (alen + flen + 3 > 1023) + sprintf(titlebar, "%s: ...%s", appname, filename+(alen+flen+6-1023)); + else + sprintf(titlebar, "%s: %s", appname, filename); + + + /* if the user didn't specify a background color on the command line, + * check for one in the PNG file--if not, the initialized values of 0 + * (black) will be used */ + + if (have_bg) { + unsigned r, g, b; /* this approach quiets compiler warnings */ + + sscanf(bgstr+1, "%2x%2x%2x", &r, &g, &b); + bg_red = (uch)r; + bg_green = (uch)g; + bg_blue = (uch)b; + } else if (readpng_get_bgcolor(&bg_red, &bg_green, &bg_blue) > 1) { + readpng_cleanup(TRUE); + fprintf(stderr, PROGNAME + ": libpng error while checking for background color\n"); + exit(2); + } + + + /* do the basic Windows initialization stuff, make the window and fill it + * with the background color */ + + if (rpng_win_create_window(hInst, showmode)) + exit(2); + + + /* decode the image, all at once */ + + Trace((stderr, "calling readpng_get_image()\n")) + image_data = readpng_get_image(display_exponent, &image_channels, + &image_rowbytes); + Trace((stderr, "done with readpng_get_image()\n")) + + + /* done with PNG file, so clean up to minimize memory usage (but do NOT + * nuke image_data!) */ + + readpng_cleanup(FALSE); + fclose(infile); + + if (!image_data) { + fprintf(stderr, PROGNAME ": unable to decode PNG image\n"); + exit(3); + } + + + /* display image (composite with background if requested) */ + + Trace((stderr, "calling rpng_win_display_image()\n")) + if (rpng_win_display_image()) { + free(image_data); + exit(4); + } + Trace((stderr, "done with rpng_win_display_image()\n")) + + + /* wait for the user to tell us when to quit */ + + printf( +#ifndef __CYGWIN__ + "Done. Press Q, Esc or mouse button 1 (within image window) to quit.\n" +#else + "Done. Press mouse button 1 (within image window) to quit.\n" +#endif + ); + fflush(stdout); + + while (GetMessage(&msg, NULL, 0, 0)) { + TranslateMessage(&msg); + DispatchMessage(&msg); + } + + + /* OK, we're done: clean up all image and Windows resources and go away */ + + rpng_win_cleanup(); + + return msg.wParam; +} + + + + + +static int rpng_win_create_window(HINSTANCE hInst, int showmode) +{ + uch *dest; + int extra_width, extra_height; + ulg i, j; + WNDCLASSEX wndclass; + + +/*--------------------------------------------------------------------------- + Allocate memory for the display-specific version of the image (round up + to multiple of 4 for Windows DIB). + ---------------------------------------------------------------------------*/ + + wimage_rowbytes = ((3*image_width + 3L) >> 2) << 2; + + if (!(dib = (uch *)malloc(sizeof(BITMAPINFOHEADER) + + wimage_rowbytes*image_height))) + { + return 4; /* fail */ + } + +/*--------------------------------------------------------------------------- + Initialize the DIB. Negative height means to use top-down BMP ordering + (must be uncompressed, but that's what we want). Bit count of 1, 4 or 8 + implies a colormap of RGBX quads, but 24-bit BMPs just use B,G,R values + directly => wimage_data begins immediately after BMP header. + ---------------------------------------------------------------------------*/ + + memset(dib, 0, sizeof(BITMAPINFOHEADER)); + bmih = (BITMAPINFOHEADER *)dib; + bmih->biSize = sizeof(BITMAPINFOHEADER); + bmih->biWidth = image_width; + bmih->biHeight = -((long)image_height); + bmih->biPlanes = 1; + bmih->biBitCount = 24; + bmih->biCompression = 0; + wimage_data = dib + sizeof(BITMAPINFOHEADER); + +/*--------------------------------------------------------------------------- + Fill in background color (black by default); data are in BGR order. + ---------------------------------------------------------------------------*/ + + for (j = 0; j < image_height; ++j) { + dest = wimage_data + j*wimage_rowbytes; + for (i = image_width; i > 0; --i) { + *dest++ = bg_blue; + *dest++ = bg_green; + *dest++ = bg_red; + } + } + +/*--------------------------------------------------------------------------- + Set the window parameters. + ---------------------------------------------------------------------------*/ + + memset(&wndclass, 0, sizeof(wndclass)); + + wndclass.cbSize = sizeof(wndclass); + wndclass.style = CS_HREDRAW | CS_VREDRAW; + wndclass.lpfnWndProc = rpng_win_wndproc; + wndclass.hInstance = hInst; + wndclass.hIcon = LoadIcon(NULL, IDI_APPLICATION); + wndclass.hCursor = LoadCursor(NULL, IDC_ARROW); + wndclass.hbrBackground = (HBRUSH)GetStockObject(DKGRAY_BRUSH); + wndclass.lpszMenuName = NULL; + wndclass.lpszClassName = progname; + wndclass.hIconSm = LoadIcon(NULL, IDI_APPLICATION); + + RegisterClassEx(&wndclass); + +/*--------------------------------------------------------------------------- + Finally, create the window. + ---------------------------------------------------------------------------*/ + + extra_width = 2*(GetSystemMetrics(SM_CXBORDER) + + GetSystemMetrics(SM_CXDLGFRAME)); + extra_height = 2*(GetSystemMetrics(SM_CYBORDER) + + GetSystemMetrics(SM_CYDLGFRAME)) + + GetSystemMetrics(SM_CYCAPTION); + + global_hwnd = CreateWindow(progname, titlebar, WS_OVERLAPPEDWINDOW, + CW_USEDEFAULT, CW_USEDEFAULT, image_width+extra_width, + image_height+extra_height, NULL, NULL, hInst, NULL); + + ShowWindow(global_hwnd, showmode); + UpdateWindow(global_hwnd); + + return 0; + +} /* end function rpng_win_create_window() */ + + + + + +static int rpng_win_display_image() +{ + uch *src, *dest; + uch r, g, b, a; + ulg i, row, lastrow; + RECT rect; + + + Trace((stderr, "beginning display loop (image_channels == %d)\n", + image_channels)) + Trace((stderr, "(width = %ld, rowbytes = %ld, wimage_rowbytes = %d)\n", + image_width, image_rowbytes, wimage_rowbytes)) + + +/*--------------------------------------------------------------------------- + Blast image data to buffer. This whole routine takes place before the + message loop begins, so there's no real point in any pseudo-progressive + display... + ---------------------------------------------------------------------------*/ + + for (lastrow = row = 0; row < image_height; ++row) { + src = image_data + row*image_rowbytes; + dest = wimage_data + row*wimage_rowbytes; + if (image_channels == 3) { + for (i = image_width; i > 0; --i) { + r = *src++; + g = *src++; + b = *src++; + *dest++ = b; + *dest++ = g; /* note reverse order */ + *dest++ = r; + } + } else /* if (image_channels == 4) */ { + for (i = image_width; i > 0; --i) { + r = *src++; + g = *src++; + b = *src++; + a = *src++; + if (a == 255) { + *dest++ = b; + *dest++ = g; + *dest++ = r; + } else if (a == 0) { + *dest++ = bg_blue; + *dest++ = bg_green; + *dest++ = bg_red; + } else { + /* this macro (copied from png.h) composites the + * foreground and background values and puts the + * result into the first argument; there are no + * side effects with the first argument */ + alpha_composite(*dest++, b, a, bg_blue); + alpha_composite(*dest++, g, a, bg_green); + alpha_composite(*dest++, r, a, bg_red); + } + } + } + /* display after every 16 lines */ + if (((row+1) & 0xf) == 0) { + rect.left = 0L; + rect.top = (LONG)lastrow; + rect.right = (LONG)image_width; /* possibly off by one? */ + rect.bottom = (LONG)lastrow + 16L; /* possibly off by one? */ + InvalidateRect(global_hwnd, &rect, FALSE); + UpdateWindow(global_hwnd); /* similar to XFlush() */ + lastrow = row + 1; + } + } + + Trace((stderr, "calling final image-flush routine\n")) + if (lastrow < image_height) { + rect.left = 0L; + rect.top = (LONG)lastrow; + rect.right = (LONG)image_width; /* possibly off by one? */ + rect.bottom = (LONG)image_height; /* possibly off by one? */ + InvalidateRect(global_hwnd, &rect, FALSE); + UpdateWindow(global_hwnd); /* similar to XFlush() */ + } + +/* + last param determines whether or not background is wiped before paint + InvalidateRect(global_hwnd, NULL, TRUE); + UpdateWindow(global_hwnd); + */ + + return 0; +} + + + + + +static void rpng_win_cleanup() +{ + if (image_data) { + free(image_data); + image_data = NULL; + } + + if (dib) { + free(dib); + dib = NULL; + } +} + + + + + +LRESULT CALLBACK rpng_win_wndproc(HWND hwnd, UINT iMsg, WPARAM wP, LPARAM lP) +{ + HDC hdc; + PAINTSTRUCT ps; + int rc; + + switch (iMsg) { + case WM_CREATE: + /* one-time processing here, if any */ + return 0; + + case WM_PAINT: + hdc = BeginPaint(hwnd, &ps); + /* dest */ + rc = StretchDIBits(hdc, 0, 0, image_width, image_height, + /* source */ + 0, 0, image_width, image_height, + wimage_data, (BITMAPINFO *)bmih, + /* iUsage: no clue */ + 0, SRCCOPY); + EndPaint(hwnd, &ps); + return 0; + + /* wait for the user to tell us when to quit */ + case WM_CHAR: + switch (wP) { /* only need one, so ignore repeat count */ + case 'q': + case 'Q': + case 0x1B: /* Esc key */ + PostQuitMessage(0); + } + return 0; + + case WM_LBUTTONDOWN: /* another way of quitting */ + case WM_DESTROY: + PostQuitMessage(0); + return 0; + } + + return DefWindowProc(hwnd, iMsg, wP, lP); +} diff --git a/compat/libpng/contrib/gregbook/rpng-x.c b/compat/libpng/contrib/gregbook/rpng-x.c new file mode 100755 index 0000000..36146d3 --- /dev/null +++ b/compat/libpng/contrib/gregbook/rpng-x.c @@ -0,0 +1,910 @@ +/*--------------------------------------------------------------------------- + + rpng - simple PNG display program rpng-x.c + + This program decodes and displays PNG images, with gamma correction and + optionally with a user-specified background color (in case the image has + transparency). It is very nearly the most basic PNG viewer possible. + This version is for the X Window System (tested by author under Unix and + by Martin Zinser under OpenVMS; may work under OS/2 with some tweaking). + + to do: + - 8-bit (colormapped) X support + - use %.1023s to simplify truncation of title-bar string? + + --------------------------------------------------------------------------- + + Changelog: + - 1.01: initial public release + - 1.02: modified to allow abbreviated options; fixed long/ulong mis- + match; switched to png_jmpbuf() macro + - 1.10: added support for non-default visuals; fixed X pixel-conversion + - 1.11: added extra set of parentheses to png_jmpbuf() macro; fixed + command-line parsing bug + - 1.12: fixed some small X memory leaks (thanks to François Petitjean) + - 1.13: fixed XFreeGC() crash bug (thanks to Patrick Welche) + - 1.14: added support for X resources (thanks to Gerhard Niklasch) + - 2.00: dual-licensed (added GNU GPL) + - 2.01: fixed improper display of usage screen on PNG error(s) + - 2.02: Added "void(argc);" statement to quiet pedantic compiler warnings + about unused variable (GR-P) + + --------------------------------------------------------------------------- + + Copyright (c) 1998-2008 Greg Roelofs. All rights reserved. + + This software is provided "as is," without warranty of any kind, + express or implied. In no event shall the author or contributors + be held liable for any damages arising in any way from the use of + this software. + + The contents of this file are DUAL-LICENSED. You may modify and/or + redistribute this software according to the terms of one of the + following two licenses (at your option): + + + LICENSE 1 ("BSD-like with advertising clause"): + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute + it freely, subject to the following restrictions: + + 1. Redistributions of source code must retain the above copyright + notice, disclaimer, and this list of conditions. + 2. Redistributions in binary form must reproduce the above copyright + notice, disclaimer, and this list of conditions in the documenta- + tion and/or other materials provided with the distribution. + 3. All advertising materials mentioning features or use of this + software must display the following acknowledgment: + + This product includes software developed by Greg Roelofs + and contributors for the book, "PNG: The Definitive Guide," + published by O'Reilly and Associates. + + + LICENSE 2 (GNU GPL v2 or later): + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software Foundation, + Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + ---------------------------------------------------------------------------*/ + +#define PROGNAME "rpng-x" +#define LONGNAME "Simple PNG Viewer for X" +#define VERSION "2.02 of 15 June 2014" +#define RESNAME "rpng" /* our X resource application name */ +#define RESCLASS "Rpng" /* our X resource class name */ + +#include +#include +#include +#include +#include +#include +#include +#include + +/* #define DEBUG : this enables the Trace() macros */ + +#include "readpng.h" /* typedefs, common macros, readpng prototypes */ + + +/* could just include png.h, but this macro is the only thing we need + * (name and typedefs changed to local versions); note that side effects + * only happen with alpha (which could easily be avoided with + * "ush acopy = (alpha);") */ + +#define alpha_composite(composite, fg, alpha, bg) { \ + ush temp = ((ush)(fg)*(ush)(alpha) + \ + (ush)(bg)*(ush)(255 - (ush)(alpha)) + (ush)128); \ + (composite) = (uch)((temp + (temp >> 8)) >> 8); \ +} + + +/* local prototypes */ +static int rpng_x_create_window(void); +static int rpng_x_display_image(void); +static void rpng_x_cleanup(void); +static int rpng_x_msb(ulg u32val); + + +static char titlebar[1024], *window_name = titlebar; +static char *appname = LONGNAME; +static char *icon_name = PROGNAME; +static char *res_name = RESNAME; +static char *res_class = RESCLASS; +static char *filename; +static FILE *infile; + +static char *bgstr; +static uch bg_red=0, bg_green=0, bg_blue=0; + +static double display_exponent; + +static ulg image_width, image_height, image_rowbytes; +static int image_channels; +static uch *image_data; + +/* X-specific variables */ +static char *displayname; +static XImage *ximage; +static Display *display; +static int depth; +static Visual *visual; +static XVisualInfo *visual_list; +static int RShift, GShift, BShift; +static ulg RMask, GMask, BMask; +static Window window; +static GC gc; +static Colormap colormap; + +static int have_nondefault_visual = FALSE; +static int have_colormap = FALSE; +static int have_window = FALSE; +static int have_gc = FALSE; +/* +ulg numcolors=0, pixels[256]; +ush reds[256], greens[256], blues[256]; + */ + + + + +int main(int argc, char **argv) +{ +#ifdef sgi + char tmpline[80]; +#endif + char *p; + int rc, alen, flen; + int error = 0; + int have_bg = FALSE; + double LUT_exponent; /* just the lookup table */ + double CRT_exponent = 2.2; /* just the monitor */ + double default_display_exponent; /* whole display system */ + XEvent e; + KeySym k; + + + displayname = (char *)NULL; + filename = (char *)NULL; + + + /* First set the default value for our display-system exponent, i.e., + * the product of the CRT exponent and the exponent corresponding to + * the frame-buffer's lookup table (LUT), if any. This is not an + * exhaustive list of LUT values (e.g., OpenStep has a lot of weird + * ones), but it should cover 99% of the current possibilities. */ + +#if defined(NeXT) + LUT_exponent = 1.0 / 2.2; + /* + if (some_next_function_that_returns_gamma(&next_gamma)) + LUT_exponent = 1.0 / next_gamma; + */ +#elif defined(sgi) + LUT_exponent = 1.0 / 1.7; + /* there doesn't seem to be any documented function to get the + * "gamma" value, so we do it the hard way */ + infile = fopen("/etc/config/system.glGammaVal", "r"); + if (infile) { + double sgi_gamma; + + fgets(tmpline, 80, infile); + fclose(infile); + sgi_gamma = atof(tmpline); + if (sgi_gamma > 0.0) + LUT_exponent = 1.0 / sgi_gamma; + } +#elif defined(Macintosh) + LUT_exponent = 1.8 / 2.61; + /* + if (some_mac_function_that_returns_gamma(&mac_gamma)) + LUT_exponent = mac_gamma / 2.61; + */ +#else + LUT_exponent = 1.0; /* assume no LUT: most PCs */ +#endif + + /* the defaults above give 1.0, 1.3, 1.5 and 2.2, respectively: */ + default_display_exponent = LUT_exponent * CRT_exponent; + + + /* If the user has set the SCREEN_GAMMA environment variable as suggested + * (somewhat imprecisely) in the libpng documentation, use that; otherwise + * use the default value we just calculated. Either way, the user may + * override this via a command-line option. */ + + if ((p = getenv("SCREEN_GAMMA")) != NULL) + display_exponent = atof(p); + else + display_exponent = default_display_exponent; + + + /* Now parse the command line for options and the PNG filename. */ + + while (*++argv && !error) { + if (!strncmp(*argv, "-display", 2)) { + if (!*++argv) + ++error; + else + displayname = *argv; + } else if (!strncmp(*argv, "-gamma", 2)) { + if (!*++argv) + ++error; + else { + display_exponent = atof(*argv); + if (display_exponent <= 0.0) + ++error; + } + } else if (!strncmp(*argv, "-bgcolor", 2)) { + if (!*++argv) + ++error; + else { + bgstr = *argv; + if (strlen(bgstr) != 7 || bgstr[0] != '#') + ++error; + else + have_bg = TRUE; + } + } else { + if (**argv != '-') { + filename = *argv; + if (argv[1]) /* shouldn't be any more args after filename */ + ++error; + } else + ++error; /* not expecting any other options */ + } + } + + if (!filename) + ++error; + + + /* print usage screen if any errors up to this point */ + + if (error) { + fprintf(stderr, "\n%s %s: %s\n", PROGNAME, VERSION, appname); + readpng_version_info(); + fprintf(stderr, "\n" + "Usage: %s [-display xdpy] [-gamma exp] [-bgcolor bg] file.png\n" + " xdpy\tname of the target X display (e.g., ``hostname:0'')\n" + " exp \ttransfer-function exponent (``gamma'') of the display\n" + "\t\t system in floating-point format (e.g., ``%.1f''); equal\n", + PROGNAME, default_display_exponent); + + fprintf(stderr, "\n" + "\t\t to the product of the lookup-table exponent (varies)\n" + "\t\t and the CRT exponent (usually 2.2); must be positive\n" + " bg \tdesired background color in 7-character hex RGB format\n" + "\t\t (e.g., ``#ff7700'' for orange: same as HTML colors);\n" + "\t\t used with transparent images\n" + "\nPress Q, Esc or mouse button 1 (within image window, after image\n" + "is displayed) to quit.\n"); + exit(1); + } + + + if (!(infile = fopen(filename, "rb"))) { + fprintf(stderr, PROGNAME ": can't open PNG file [%s]\n", filename); + ++error; + } else { + if ((rc = readpng_init(infile, &image_width, &image_height)) != 0) { + switch (rc) { + case 1: + fprintf(stderr, PROGNAME + ": [%s] is not a PNG file: incorrect signature\n", + filename); + break; + case 2: + fprintf(stderr, PROGNAME + ": [%s] has bad IHDR (libpng longjmp)\n", filename); + break; + case 4: + fprintf(stderr, PROGNAME ": insufficient memory\n"); + break; + default: + fprintf(stderr, PROGNAME + ": unknown readpng_init() error\n"); + break; + } + ++error; + } else { + display = XOpenDisplay(displayname); + if (!display) { + readpng_cleanup(TRUE); + fprintf(stderr, PROGNAME ": can't open X display [%s]\n", + displayname? displayname : "default"); + ++error; + } + } + if (error) + fclose(infile); + } + + + if (error) { + fprintf(stderr, PROGNAME ": aborting.\n"); + exit(2); + } + + + /* set the title-bar string, but make sure buffer doesn't overflow */ + + alen = strlen(appname); + flen = strlen(filename); + if (alen + flen + 3 > 1023) + sprintf(titlebar, "%s: ...%s", appname, filename+(alen+flen+6-1023)); + else + sprintf(titlebar, "%s: %s", appname, filename); + + + /* if the user didn't specify a background color on the command line, + * check for one in the PNG file--if not, the initialized values of 0 + * (black) will be used */ + + if (have_bg) { + unsigned r, g, b; /* this approach quiets compiler warnings */ + + sscanf(bgstr+1, "%2x%2x%2x", &r, &g, &b); + bg_red = (uch)r; + bg_green = (uch)g; + bg_blue = (uch)b; + } else if (readpng_get_bgcolor(&bg_red, &bg_green, &bg_blue) > 1) { + readpng_cleanup(TRUE); + fprintf(stderr, PROGNAME + ": libpng error while checking for background color\n"); + exit(2); + } + + + /* do the basic X initialization stuff, make the window and fill it + * with the background color */ + + if (rpng_x_create_window()) + exit(2); + + + /* decode the image, all at once */ + + Trace((stderr, "calling readpng_get_image()\n")) + image_data = readpng_get_image(display_exponent, &image_channels, + &image_rowbytes); + Trace((stderr, "done with readpng_get_image()\n")) + + + /* done with PNG file, so clean up to minimize memory usage (but do NOT + * nuke image_data!) */ + + readpng_cleanup(FALSE); + fclose(infile); + + if (!image_data) { + fprintf(stderr, PROGNAME ": unable to decode PNG image\n"); + exit(3); + } + + + /* display image (composite with background if requested) */ + + Trace((stderr, "calling rpng_x_display_image()\n")) + if (rpng_x_display_image()) { + free(image_data); + exit(4); + } + Trace((stderr, "done with rpng_x_display_image()\n")) + + + /* wait for the user to tell us when to quit */ + + printf( + "Done. Press Q, Esc or mouse button 1 (within image window) to quit.\n"); + fflush(stdout); + + do + XNextEvent(display, &e); + while (!(e.type == ButtonPress && e.xbutton.button == Button1) && + !(e.type == KeyPress && /* v--- or 1 for shifted keys */ + ((k = XLookupKeysym(&e.xkey, 0)) == XK_q || k == XK_Escape) )); + + + /* OK, we're done: clean up all image and X resources and go away */ + + rpng_x_cleanup(); + + (void)argc; /* Unused */ + + return 0; +} + + + + + +static int rpng_x_create_window(void) +{ + uch *xdata; + int need_colormap = FALSE; + int screen, pad; + ulg bg_pixel = 0L; + ulg attrmask; + Window root; + XEvent e; + XGCValues gcvalues; + XSetWindowAttributes attr; + XTextProperty windowName, *pWindowName = &windowName; + XTextProperty iconName, *pIconName = &iconName; + XVisualInfo visual_info; + XSizeHints *size_hints; + XWMHints *wm_hints; + XClassHint *class_hints; + + + screen = DefaultScreen(display); + depth = DisplayPlanes(display, screen); + root = RootWindow(display, screen); + +#ifdef DEBUG + XSynchronize(display, True); +#endif + +#if 0 +/* GRR: add 8-bit support */ + if (/* depth != 8 && */ depth != 16 && depth != 24 && depth != 32) { + fprintf(stderr, + "screen depth %d not supported (only 16-, 24- or 32-bit TrueColor)\n", + depth); + return 2; + } + + XMatchVisualInfo(display, screen, depth, + (depth == 8)? PseudoColor : TrueColor, &visual_info); + visual = visual_info.visual; +#else + if (depth != 16 && depth != 24 && depth != 32) { + int visuals_matched = 0; + + Trace((stderr, "default depth is %d: checking other visuals\n", + depth)) + + /* 24-bit first */ + visual_info.screen = screen; + visual_info.depth = 24; + visual_list = XGetVisualInfo(display, + VisualScreenMask | VisualDepthMask, &visual_info, &visuals_matched); + if (visuals_matched == 0) { +/* GRR: add 15-, 16- and 32-bit TrueColor visuals (also DirectColor?) */ + fprintf(stderr, "default screen depth %d not supported, and no" + " 24-bit visuals found\n", depth); + return 2; + } + Trace((stderr, "XGetVisualInfo() returned %d 24-bit visuals\n", + visuals_matched)) + visual = visual_list[0].visual; + depth = visual_list[0].depth; +/* + colormap_size = visual_list[0].colormap_size; + visual_class = visual->class; + visualID = XVisualIDFromVisual(visual); + */ + have_nondefault_visual = TRUE; + need_colormap = TRUE; + } else { + XMatchVisualInfo(display, screen, depth, TrueColor, &visual_info); + visual = visual_info.visual; + } +#endif + + RMask = visual->red_mask; + GMask = visual->green_mask; + BMask = visual->blue_mask; + +/* GRR: add/check 8-bit support */ + if (depth == 8 || need_colormap) { + colormap = XCreateColormap(display, root, visual, AllocNone); + if (!colormap) { + fprintf(stderr, "XCreateColormap() failed\n"); + return 2; + } + have_colormap = TRUE; + } + if (depth == 15 || depth == 16) { + RShift = 15 - rpng_x_msb(RMask); /* these are right-shifts */ + GShift = 15 - rpng_x_msb(GMask); + BShift = 15 - rpng_x_msb(BMask); + } else if (depth > 16) { +#define NO_24BIT_MASKS +#ifdef NO_24BIT_MASKS + RShift = rpng_x_msb(RMask) - 7; /* these are left-shifts */ + GShift = rpng_x_msb(GMask) - 7; + BShift = rpng_x_msb(BMask) - 7; +#else + RShift = 7 - rpng_x_msb(RMask); /* these are right-shifts, too */ + GShift = 7 - rpng_x_msb(GMask); + BShift = 7 - rpng_x_msb(BMask); +#endif + } + if (depth >= 15 && (RShift < 0 || GShift < 0 || BShift < 0)) { + fprintf(stderr, "rpng internal logic error: negative X shift(s)!\n"); + return 2; + } + +/*--------------------------------------------------------------------------- + Finally, create the window. + ---------------------------------------------------------------------------*/ + + attr.backing_store = Always; + attr.event_mask = ExposureMask | KeyPressMask | ButtonPressMask; + attrmask = CWBackingStore | CWEventMask; + if (have_nondefault_visual) { + attr.colormap = colormap; + attr.background_pixel = 0; + attr.border_pixel = 1; + attrmask |= CWColormap | CWBackPixel | CWBorderPixel; + } + + window = XCreateWindow(display, root, 0, 0, image_width, image_height, 0, + depth, InputOutput, visual, attrmask, &attr); + + if (window == None) { + fprintf(stderr, "XCreateWindow() failed\n"); + return 2; + } else + have_window = TRUE; + + if (depth == 8) + XSetWindowColormap(display, window, colormap); + + if (!XStringListToTextProperty(&window_name, 1, pWindowName)) + pWindowName = NULL; + if (!XStringListToTextProperty(&icon_name, 1, pIconName)) + pIconName = NULL; + + /* OK if any hints allocation fails; XSetWMProperties() allows NULLs */ + + if ((size_hints = XAllocSizeHints()) != NULL) { + /* window will not be resizable */ + size_hints->flags = PMinSize | PMaxSize; + size_hints->min_width = size_hints->max_width = (int)image_width; + size_hints->min_height = size_hints->max_height = (int)image_height; + } + + if ((wm_hints = XAllocWMHints()) != NULL) { + wm_hints->initial_state = NormalState; + wm_hints->input = True; + /* wm_hints->icon_pixmap = icon_pixmap; */ + wm_hints->flags = StateHint | InputHint /* | IconPixmapHint */ ; + } + + if ((class_hints = XAllocClassHint()) != NULL) { + class_hints->res_name = res_name; + class_hints->res_class = res_class; + } + + XSetWMProperties(display, window, pWindowName, pIconName, NULL, 0, + size_hints, wm_hints, class_hints); + + /* various properties and hints no longer needed; free memory */ + if (pWindowName) + XFree(pWindowName->value); + if (pIconName) + XFree(pIconName->value); + if (size_hints) + XFree(size_hints); + if (wm_hints) + XFree(wm_hints); + if (class_hints) + XFree(class_hints); + + XMapWindow(display, window); + + gc = XCreateGC(display, window, 0, &gcvalues); + have_gc = TRUE; + +/*--------------------------------------------------------------------------- + Fill window with the specified background color. + ---------------------------------------------------------------------------*/ + + if (depth == 24 || depth == 32) { + bg_pixel = ((ulg)bg_red << RShift) | + ((ulg)bg_green << GShift) | + ((ulg)bg_blue << BShift); + } else if (depth == 16) { + bg_pixel = ((((ulg)bg_red << 8) >> RShift) & RMask) | + ((((ulg)bg_green << 8) >> GShift) & GMask) | + ((((ulg)bg_blue << 8) >> BShift) & BMask); + } else /* depth == 8 */ { + + /* GRR: add 8-bit support */ + + } + + XSetForeground(display, gc, bg_pixel); + XFillRectangle(display, window, gc, 0, 0, image_width, image_height); + +/*--------------------------------------------------------------------------- + Wait for first Expose event to do any drawing, then flush. + ---------------------------------------------------------------------------*/ + + do + XNextEvent(display, &e); + while (e.type != Expose || e.xexpose.count); + + XFlush(display); + +/*--------------------------------------------------------------------------- + Allocate memory for the X- and display-specific version of the image. + ---------------------------------------------------------------------------*/ + + if (depth == 24 || depth == 32) { + xdata = (uch *)malloc(4*image_width*image_height); + pad = 32; + } else if (depth == 16) { + xdata = (uch *)malloc(2*image_width*image_height); + pad = 16; + } else /* depth == 8 */ { + xdata = (uch *)malloc(image_width*image_height); + pad = 8; + } + + if (!xdata) { + fprintf(stderr, PROGNAME ": unable to allocate image memory\n"); + return 4; + } + + ximage = XCreateImage(display, visual, depth, ZPixmap, 0, + (char *)xdata, image_width, image_height, pad, 0); + + if (!ximage) { + fprintf(stderr, PROGNAME ": XCreateImage() failed\n"); + free(xdata); + return 3; + } + + /* to avoid testing the byte order every pixel (or doubling the size of + * the drawing routine with a giant if-test), we arbitrarily set the byte + * order to MSBFirst and let Xlib worry about inverting things on little- + * endian machines (like Linux/x86, old VAXen, etc.)--this is not the most + * efficient approach (the giant if-test would be better), but in the + * interest of clarity, we take the easy way out... */ + + ximage->byte_order = MSBFirst; + + return 0; + +} /* end function rpng_x_create_window() */ + + + + + +static int rpng_x_display_image(void) +{ + uch *src; + char *dest; + uch r, g, b, a; + ulg i, row, lastrow = 0; + ulg pixel; + int ximage_rowbytes = ximage->bytes_per_line; +/* int bpp = ximage->bits_per_pixel; */ + + + Trace((stderr, "beginning display loop (image_channels == %d)\n", + image_channels)) + Trace((stderr, " (width = %ld, rowbytes = %ld, ximage_rowbytes = %d)\n", + image_width, image_rowbytes, ximage_rowbytes)) + Trace((stderr, " (bpp = %d)\n", ximage->bits_per_pixel)) + Trace((stderr, " (byte_order = %s)\n", ximage->byte_order == MSBFirst? + "MSBFirst" : (ximage->byte_order == LSBFirst? "LSBFirst" : "unknown"))) + + if (depth == 24 || depth == 32) { + ulg red, green, blue; + + for (lastrow = row = 0; row < image_height; ++row) { + src = image_data + row*image_rowbytes; + dest = ximage->data + row*ximage_rowbytes; + if (image_channels == 3) { + for (i = image_width; i > 0; --i) { + red = *src++; + green = *src++; + blue = *src++; +#ifdef NO_24BIT_MASKS + pixel = (red << RShift) | + (green << GShift) | + (blue << BShift); + /* recall that we set ximage->byte_order = MSBFirst above */ + /* GRR BUG: this assumes bpp == 32, but may be 24: */ + *dest++ = (char)((pixel >> 24) & 0xff); + *dest++ = (char)((pixel >> 16) & 0xff); + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); +#else + red = (RShift < 0)? red << (-RShift) : red >> RShift; + green = (GShift < 0)? green << (-GShift) : green >> GShift; + blue = (BShift < 0)? blue << (-BShift) : blue >> BShift; + pixel = (red & RMask) | (green & GMask) | (blue & BMask); + /* recall that we set ximage->byte_order = MSBFirst above */ + *dest++ = (char)((pixel >> 24) & 0xff); + *dest++ = (char)((pixel >> 16) & 0xff); + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); +#endif + } + } else /* if (image_channels == 4) */ { + for (i = image_width; i > 0; --i) { + r = *src++; + g = *src++; + b = *src++; + a = *src++; + if (a == 255) { + red = r; + green = g; + blue = b; + } else if (a == 0) { + red = bg_red; + green = bg_green; + blue = bg_blue; + } else { + /* this macro (from png.h) composites the foreground + * and background values and puts the result into the + * first argument */ + alpha_composite(red, r, a, bg_red); + alpha_composite(green, g, a, bg_green); + alpha_composite(blue, b, a, bg_blue); + } + pixel = (red << RShift) | + (green << GShift) | + (blue << BShift); + /* recall that we set ximage->byte_order = MSBFirst above */ + *dest++ = (char)((pixel >> 24) & 0xff); + *dest++ = (char)((pixel >> 16) & 0xff); + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } + } + /* display after every 16 lines */ + if (((row+1) & 0xf) == 0) { + XPutImage(display, window, gc, ximage, 0, (int)lastrow, 0, + (int)lastrow, image_width, 16); + XFlush(display); + lastrow = row + 1; + } + } + + } else if (depth == 16) { + ush red, green, blue; + + for (lastrow = row = 0; row < image_height; ++row) { + src = image_data + row*image_rowbytes; + dest = ximage->data + row*ximage_rowbytes; + if (image_channels == 3) { + for (i = image_width; i > 0; --i) { + red = ((ush)(*src) << 8); + ++src; + green = ((ush)(*src) << 8); + ++src; + blue = ((ush)(*src) << 8); + ++src; + pixel = ((red >> RShift) & RMask) | + ((green >> GShift) & GMask) | + ((blue >> BShift) & BMask); + /* recall that we set ximage->byte_order = MSBFirst above */ + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } + } else /* if (image_channels == 4) */ { + for (i = image_width; i > 0; --i) { + r = *src++; + g = *src++; + b = *src++; + a = *src++; + if (a == 255) { + red = ((ush)r << 8); + green = ((ush)g << 8); + blue = ((ush)b << 8); + } else if (a == 0) { + red = ((ush)bg_red << 8); + green = ((ush)bg_green << 8); + blue = ((ush)bg_blue << 8); + } else { + /* this macro (from png.h) composites the foreground + * and background values and puts the result back into + * the first argument (== fg byte here: safe) */ + alpha_composite(r, r, a, bg_red); + alpha_composite(g, g, a, bg_green); + alpha_composite(b, b, a, bg_blue); + red = ((ush)r << 8); + green = ((ush)g << 8); + blue = ((ush)b << 8); + } + pixel = ((red >> RShift) & RMask) | + ((green >> GShift) & GMask) | + ((blue >> BShift) & BMask); + /* recall that we set ximage->byte_order = MSBFirst above */ + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } + } + /* display after every 16 lines */ + if (((row+1) & 0xf) == 0) { + XPutImage(display, window, gc, ximage, 0, (int)lastrow, 0, + (int)lastrow, image_width, 16); + XFlush(display); + lastrow = row + 1; + } + } + + } else /* depth == 8 */ { + + /* GRR: add 8-bit support */ + + } + + Trace((stderr, "calling final XPutImage()\n")) + if (lastrow < image_height) { + XPutImage(display, window, gc, ximage, 0, (int)lastrow, 0, + (int)lastrow, image_width, image_height-lastrow); + XFlush(display); + } + + return 0; +} + + + + +static void rpng_x_cleanup(void) +{ + if (image_data) { + free(image_data); + image_data = NULL; + } + + if (ximage) { + if (ximage->data) { + free(ximage->data); /* we allocated it, so we free it */ + ximage->data = (char *)NULL; /* instead of XDestroyImage() */ + } + XDestroyImage(ximage); + ximage = NULL; + } + + if (have_gc) + XFreeGC(display, gc); + + if (have_window) + XDestroyWindow(display, window); + + if (have_colormap) + XFreeColormap(display, colormap); + + if (have_nondefault_visual) + XFree(visual_list); +} + + + + + +static int rpng_x_msb(ulg u32val) +{ + int i; + + for (i = 31; i >= 0; --i) { + if (u32val & 0x80000000L) + break; + u32val <<= 1; + } + return i; +} diff --git a/compat/libpng/contrib/gregbook/rpng2-win.c b/compat/libpng/contrib/gregbook/rpng2-win.c new file mode 100755 index 0000000..f7113b0 --- /dev/null +++ b/compat/libpng/contrib/gregbook/rpng2-win.c @@ -0,0 +1,1255 @@ +/*--------------------------------------------------------------------------- + + rpng2 - progressive-model PNG display program rpng2-win.c + + This program decodes and displays PNG files progressively, as if it were + a web browser (though the front end is only set up to read from files). + It supports gamma correction, user-specified background colors, and user- + specified background patterns (for transparent images). This version is + for 32-bit Windows; it may compile under 16-bit Windows with a little + tweaking (or maybe not). Thanks to Adam Costello and Pieter S. van der + Meulen for the "diamond" and "radial waves" patterns, respectively. + + to do (someday, maybe): + - handle quoted command-line args (especially filenames with spaces) + - finish resizable checkerboard-gradient (sizes 4-128?) + - use %.1023s to simplify truncation of title-bar string? + - have minimum window width: oh well + + --------------------------------------------------------------------------- + + Changelog: + - 1.01: initial public release + - 1.02: fixed cut-and-paste error in usage screen (oops...) + - 1.03: modified to allow abbreviated options + - 1.04: removed bogus extra argument from usage fprintf() [Glenn R-P?]; + fixed command-line parsing bug + - 1.10: enabled "message window"/console (thanks to David Geldreich) + - 1.20: added runtime MMX-enabling/disabling and new -mmx* options + - 1.21: made minor tweak to usage screen to fit within 25-line console + - 1.22: added AMD64/EM64T support (__x86_64__) + - 2.00: dual-licensed (added GNU GPL) + - 2.01: fixed 64-bit typo in readpng2.c + - 2.02: fixed improper display of usage screen on PNG error(s); fixed + unexpected-EOF and file-read-error cases + - 2.03: removed runtime MMX-enabling/disabling and obsolete -mmx* options + - 2.04: + (GR-P) + + --------------------------------------------------------------------------- + + Copyright (c) 1998-2008 Greg Roelofs. All rights reserved. + + This software is provided "as is," without warranty of any kind, + express or implied. In no event shall the author or contributors + be held liable for any damages arising in any way from the use of + this software. + + The contents of this file are DUAL-LICENSED. You may modify and/or + redistribute this software according to the terms of one of the + following two licenses (at your option): + + + LICENSE 1 ("BSD-like with advertising clause"): + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute + it freely, subject to the following restrictions: + + 1. Redistributions of source code must retain the above copyright + notice, disclaimer, and this list of conditions. + 2. Redistributions in binary form must reproduce the above copyright + notice, disclaimer, and this list of conditions in the documenta- + tion and/or other materials provided with the distribution. + 3. All advertising materials mentioning features or use of this + software must display the following acknowledgment: + + This product includes software developed by Greg Roelofs + and contributors for the book, "PNG: The Definitive Guide," + published by O'Reilly and Associates. + + + LICENSE 2 (GNU GPL v2 or later): + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software Foundation, + Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + ---------------------------------------------------------------------------*/ + +#define PROGNAME "rpng2-win" +#define LONGNAME "Progressive PNG Viewer for Windows" +#define VERSION "2.02 of 16 March 2008" + +#include +#include +#include +#include /* for jmpbuf declaration in readpng2.h */ +#include +#include /* only for PvdM background code */ +#include +#ifdef __CYGWIN__ +/* getch replacement. Turns out, we don't really need this, + * but leave it here if we ever enable any of the uses of + * _getch in the main code + */ +#include +#include +#include +int repl_getch( void ) +{ + char ch; + int fd = fileno(stdin); + struct termio old_tty, new_tty; + + ioctl(fd, TCGETA, &old_tty); + new_tty = old_tty; + new_tty.c_lflag &= ~(ICANON | ECHO | ISIG); + ioctl(fd, TCSETA, &new_tty); + fread(&ch, 1, sizeof(ch), stdin); + ioctl(fd, TCSETA, &old_tty); + + return ch; +} +#define _getch repl_getch +#else +#include /* only for _getch() */ +#endif + +/* all for PvdM background code: */ +#ifndef PI +# define PI 3.141592653589793238 +#endif +#define PI_2 (PI*0.5) +#define INV_PI_360 (360.0 / PI) +#define MAX(a,b) (a>b?a:b) +#define MIN(a,b) (a> 8)) >> 8); \ +} + + +#define INBUFSIZE 4096 /* with pseudo-timing on (1 sec delay/block), this + * block size corresponds roughly to a download + * speed 10% faster than theoretical 33.6K maximum + * (assuming 8 data bits, 1 stop bit and no other + * overhead) */ + +/* local prototypes */ +static void rpng2_win_init(void); +static int rpng2_win_create_window(void); +static int rpng2_win_load_bg_image(void); +static void rpng2_win_display_row(ulg row); +static void rpng2_win_finish_display(void); +static void rpng2_win_cleanup(void); +LRESULT CALLBACK rpng2_win_wndproc(HWND, UINT, WPARAM, LPARAM); + + +static char titlebar[1024]; +static char *progname = PROGNAME; +static char *appname = LONGNAME; +static char *filename; +static FILE *infile; + +static mainprog_info rpng2_info; + +static uch inbuf[INBUFSIZE]; +static int incount; + +static int pat = 6; /* must be less than num_bgpat */ +static int bg_image = 0; +static int bgscale = 16; +static ulg bg_rowbytes; +static uch *bg_data; + +static struct rgb_color { + uch r, g, b; +} rgb[] = { + { 0, 0, 0}, /* 0: black */ + {255, 255, 255}, /* 1: white */ + {173, 132, 57}, /* 2: tan */ + { 64, 132, 0}, /* 3: medium green */ + {189, 117, 1}, /* 4: gold */ + {253, 249, 1}, /* 5: yellow */ + { 0, 0, 255}, /* 6: blue */ + { 0, 0, 120}, /* 7: medium blue */ + {255, 0, 255}, /* 8: magenta */ + { 64, 0, 64}, /* 9: dark magenta */ + {255, 0, 0}, /* 10: red */ + { 64, 0, 0}, /* 11: dark red */ + {255, 127, 0}, /* 12: orange */ + {192, 96, 0}, /* 13: darker orange */ + { 24, 60, 0}, /* 14: dark green-yellow */ + { 85, 125, 200} /* 15: ice blue */ +}; +/* not used for now, but should be for error-checking: +static int num_rgb = sizeof(rgb) / sizeof(struct rgb_color); + */ + +/* + This whole struct is a fairly cheesy way to keep the number of + command-line options to a minimum. The radial-waves background + type is a particularly poor fit to the integer elements of the + struct...but a few macros and a little fixed-point math will do + wonders for ya. + + type bits: + F E D C B A 9 8 7 6 5 4 3 2 1 0 + | | | | | + | | +-+-+-- 0 = sharp-edged checkerboard + | | 1 = soft diamonds + | | 2 = radial waves + | | 3-7 = undefined + | +-- gradient #2 inverted? + +-- alternating columns inverted? + */ +static struct background_pattern { + ush type; + int rgb1_max, rgb1_min; /* or bg_freq, bg_gray */ + int rgb2_max, rgb2_min; /* or bg_bsat, bg_brot (both scaled by 10)*/ +} bg[] = { + {0+8, 2,0, 1,15}, /* checkered: tan/black vs. white/ice blue */ + {0+24, 2,0, 1,0}, /* checkered: tan/black vs. white/black */ + {0+8, 4,5, 0,2}, /* checkered: gold/yellow vs. black/tan */ + {0+8, 4,5, 0,6}, /* checkered: gold/yellow vs. black/blue */ + {0, 7,0, 8,9}, /* checkered: deep blue/black vs. magenta */ + {0+8, 13,0, 5,14}, /* checkered: orange/black vs. yellow */ + {0+8, 12,0, 10,11}, /* checkered: orange/black vs. red */ + {1, 7,0, 8,0}, /* diamonds: deep blue/black vs. magenta */ + {1, 12,0, 11,0}, /* diamonds: orange vs. dark red */ + {1, 10,0, 7,0}, /* diamonds: red vs. medium blue */ + {1, 4,0, 5,0}, /* diamonds: gold vs. yellow */ + {1, 3,0, 0,0}, /* diamonds: medium green vs. black */ + {2, 16, 100, 20, 0}, /* radial: ~hard radial color-beams */ + {2, 18, 100, 10, 2}, /* radial: soft, curved radial color-beams */ + {2, 16, 256, 100, 250}, /* radial: very tight spiral */ + {2, 10000, 256, 11, 0} /* radial: dipole-moire' (almost fractal) */ +}; +static int num_bgpat = sizeof(bg) / sizeof(struct background_pattern); + + +/* Windows-specific global variables (could go in struct, but messy...) */ +static ulg wimage_rowbytes; +static uch *dib; +static uch *wimage_data; +static BITMAPINFOHEADER *bmih; + +static HWND global_hwnd; +static HINSTANCE global_hInst; +static int global_showmode; + + + + +int WINAPI WinMain(HINSTANCE hInst, HINSTANCE hPrevInst, PSTR cmd, int showmode) +{ + char *args[1024]; /* arbitrary limit, but should suffice */ + char **argv = args; + char *p, *q, *bgstr = NULL; + int argc = 0; + int rc, alen, flen; + int error = 0; + int timing = FALSE; + int have_bg = FALSE; + double LUT_exponent; /* just the lookup table */ + double CRT_exponent = 2.2; /* just the monitor */ + double default_display_exponent; /* whole display system */ + MSG msg; + + + /* First initialize a few things, just to be sure--memset takes care of + * default background color (black), booleans (FALSE), pointers (NULL), + * etc. */ + + global_hInst = hInst; + global_showmode = showmode; + filename = (char *)NULL; + memset(&rpng2_info, 0, sizeof(mainprog_info)); + +#ifndef __CYGWIN__ + /* Next reenable console output, which normally goes to the bit bucket + * for windowed apps. Closing the console window will terminate the + * app. Thanks to David.Geldreich@realviz.com for supplying the magical + * incantation. */ + + AllocConsole(); + freopen("CONOUT$", "a", stderr); + freopen("CONOUT$", "a", stdout); +#endif + + /* Set the default value for our display-system exponent, i.e., the + * product of the CRT exponent and the exponent corresponding to + * the frame-buffer's lookup table (LUT), if any. This is not an + * exhaustive list of LUT values (e.g., OpenStep has a lot of weird + * ones), but it should cover 99% of the current possibilities. And + * yes, these ifdefs are completely wasted in a Windows program... */ + +#if defined(NeXT) + /* third-party utilities can modify the default LUT exponent */ + LUT_exponent = 1.0 / 2.2; + /* + if (some_next_function_that_returns_gamma(&next_gamma)) + LUT_exponent = 1.0 / next_gamma; + */ +#elif defined(sgi) + LUT_exponent = 1.0 / 1.7; + /* there doesn't seem to be any documented function to + * get the "gamma" value, so we do it the hard way */ + infile = fopen("/etc/config/system.glGammaVal", "r"); + if (infile) { + double sgi_gamma; + + fgets(tmpline, 80, infile); + fclose(infile); + sgi_gamma = atof(tmpline); + if (sgi_gamma > 0.0) + LUT_exponent = 1.0 / sgi_gamma; + } +#elif defined(Macintosh) + LUT_exponent = 1.8 / 2.61; + /* + if (some_mac_function_that_returns_gamma(&mac_gamma)) + LUT_exponent = mac_gamma / 2.61; + */ +#else + LUT_exponent = 1.0; /* assume no LUT: most PCs */ +#endif + + /* the defaults above give 1.0, 1.3, 1.5 and 2.2, respectively: */ + default_display_exponent = LUT_exponent * CRT_exponent; + + + /* If the user has set the SCREEN_GAMMA environment variable as suggested + * (somewhat imprecisely) in the libpng documentation, use that; otherwise + * use the default value we just calculated. Either way, the user may + * override this via a command-line option. */ + + if ((p = getenv("SCREEN_GAMMA")) != NULL) + rpng2_info.display_exponent = atof(p); + else + rpng2_info.display_exponent = default_display_exponent; + + + /* Windows really hates command lines, so we have to set up our own argv. + * Note that we do NOT bother with quoted arguments here, so don't use + * filenames with spaces in 'em! */ + + argv[argc++] = PROGNAME; + p = cmd; + for (;;) { + if (*p == ' ') + while (*++p == ' ') + ; + /* now p points at the first non-space after some spaces */ + if (*p == '\0') + break; /* nothing after the spaces: done */ + argv[argc++] = q = p; + while (*q && *q != ' ') + ++q; + /* now q points at a space or the end of the string */ + if (*q == '\0') + break; /* last argv already terminated; quit */ + *q = '\0'; /* change space to terminator */ + p = q + 1; + } + argv[argc] = NULL; /* terminate the argv array itself */ + + + /* Now parse the command line for options and the PNG filename. */ + + while (*++argv && !error) { + if (!strncmp(*argv, "-gamma", 2)) { + if (!*++argv) + ++error; + else { + rpng2_info.display_exponent = atof(*argv); + if (rpng2_info.display_exponent <= 0.0) + ++error; + } + } else if (!strncmp(*argv, "-bgcolor", 4)) { + if (!*++argv) + ++error; + else { + bgstr = *argv; + if (strlen(bgstr) != 7 || bgstr[0] != '#') + ++error; + else { + have_bg = TRUE; + bg_image = FALSE; + } + } + } else if (!strncmp(*argv, "-bgpat", 4)) { + if (!*++argv) + ++error; + else { + pat = atoi(*argv) - 1; + if (pat < 0 || pat >= num_bgpat) + ++error; + else { + bg_image = TRUE; + have_bg = FALSE; + } + } + } else if (!strncmp(*argv, "-timing", 2)) { + timing = TRUE; + } else { + if (**argv != '-') { + filename = *argv; + if (argv[1]) /* shouldn't be any more args after filename */ + ++error; + } else + ++error; /* not expecting any other options */ + } + } + + if (!filename) + ++error; + + + /* print usage screen if any errors up to this point */ + + if (error) { +#ifndef __CYGWIN__ + int ch; +#endif + + fprintf(stderr, "\n%s %s: %s\n\n", PROGNAME, VERSION, appname); + readpng2_version_info(); + fprintf(stderr, "\n" + "Usage: %s [-gamma exp] [-bgcolor bg | -bgpat pat] [-timing]\n" + " %*s file.png\n\n" + " exp \ttransfer-function exponent (``gamma'') of the display\n" + "\t\t system in floating-point format (e.g., ``%.1f''); equal\n" + "\t\t to the product of the lookup-table exponent (varies)\n" + "\t\t and the CRT exponent (usually 2.2); must be positive\n" + " bg \tdesired background color in 7-character hex RGB format\n" + "\t\t (e.g., ``#ff7700'' for orange: same as HTML colors);\n" + "\t\t used with transparent images; overrides -bgpat option\n" + " pat \tdesired background pattern number (1-%d); used with\n" + "\t\t transparent images; overrides -bgcolor option\n" + " -timing\tenables delay for every block read, to simulate modem\n" + "\t\t download of image (~36 Kbps)\n" + "\nPress Q, Esc or mouse button 1 after image is displayed to quit.\n" +#ifndef __CYGWIN__ + "Press Q or Esc to quit this usage screen. ", +#else + , +#endif + PROGNAME, +#if (defined(__i386__) || defined(_M_IX86) || defined(__x86_64__)) && \ + !(defined(__CYGWIN__) || defined(__MINGW32__)) + (int)strlen(PROGNAME), " ", +#endif + (int)strlen(PROGNAME), " ", default_display_exponent, num_bgpat); + fflush(stderr); +#ifndef __CYGWIN__ + do + ch = _getch(); + while (ch != 'q' && ch != 'Q' && ch != 0x1B); +#endif + exit(1); + } + + + if (!(infile = fopen(filename, "rb"))) { + fprintf(stderr, PROGNAME ": can't open PNG file [%s]\n", filename); + ++error; + } else { + incount = fread(inbuf, 1, INBUFSIZE, infile); + if (incount < 8 || !readpng2_check_sig(inbuf, 8)) { + fprintf(stderr, PROGNAME + ": [%s] is not a PNG file: incorrect signature\n", + filename); + ++error; + } else if ((rc = readpng2_init(&rpng2_info)) != 0) { + switch (rc) { + case 2: + fprintf(stderr, PROGNAME + ": [%s] has bad IHDR (libpng longjmp)\n", filename); + break; + case 4: + fprintf(stderr, PROGNAME ": insufficient memory\n"); + break; + default: + fprintf(stderr, PROGNAME + ": unknown readpng2_init() error\n"); + break; + } + ++error; + } + if (error) + fclose(infile); + } + + + if (error) { +#ifndef __CYGWIN__ + int ch; +#endif + + fprintf(stderr, PROGNAME ": aborting.\n"); +#ifndef __CYGWIN__ + do + ch = _getch(); + while (ch != 'q' && ch != 'Q' && ch != 0x1B); +#endif + exit(2); + } else { + fprintf(stderr, "\n%s %s: %s\n", PROGNAME, VERSION, appname); +#ifndef __CYGWIN__ + fprintf(stderr, + "\n [console window: closing this window will terminate %s]\n\n", + PROGNAME); +#endif + fflush(stderr); + } + + + /* set the title-bar string, but make sure buffer doesn't overflow */ + + alen = strlen(appname); + flen = strlen(filename); + if (alen + flen + 3 > 1023) + sprintf(titlebar, "%s: ...%s", appname, filename+(alen+flen+6-1023)); + else + sprintf(titlebar, "%s: %s", appname, filename); + + + /* set some final rpng2_info variables before entering main data loop */ + + if (have_bg) { + unsigned r, g, b; /* this approach quiets compiler warnings */ + + sscanf(bgstr+1, "%2x%2x%2x", &r, &g, &b); + rpng2_info.bg_red = (uch)r; + rpng2_info.bg_green = (uch)g; + rpng2_info.bg_blue = (uch)b; + } else + rpng2_info.need_bgcolor = TRUE; + + rpng2_info.state = kPreInit; + rpng2_info.mainprog_init = rpng2_win_init; + rpng2_info.mainprog_display_row = rpng2_win_display_row; + rpng2_info.mainprog_finish_display = rpng2_win_finish_display; + + + /* OK, this is the fun part: call readpng2_decode_data() at the start of + * the loop to deal with our first buffer of data (read in above to verify + * that the file is a PNG image), then loop through the file and continue + * calling the same routine to handle each chunk of data. It in turn + * passes the data to libpng, which will invoke one or more of our call- + * backs as decoded data become available. We optionally call Sleep() for + * one second per iteration to simulate downloading the image via an analog + * modem. */ + + for (;;) { + Trace((stderr, "about to call readpng2_decode_data()\n")) + if (readpng2_decode_data(&rpng2_info, inbuf, incount)) + ++error; + Trace((stderr, "done with readpng2_decode_data()\n")) + + if (error || incount != INBUFSIZE || rpng2_info.state == kDone) { + if (rpng2_info.state == kDone) { + Trace((stderr, "done decoding PNG image\n")) + } else if (ferror(infile)) { + fprintf(stderr, PROGNAME + ": error while reading PNG image file\n"); + exit(3); + } else if (feof(infile)) { + fprintf(stderr, PROGNAME ": end of file reached " + "(unexpectedly) while reading PNG image file\n"); + exit(3); + } else /* if (error) */ { + /* will print error message below */ + } + break; + } + + if (timing) + Sleep(1000L); + + incount = fread(inbuf, 1, INBUFSIZE, infile); + } + + + /* clean up PNG stuff and report any decoding errors */ + + fclose(infile); + Trace((stderr, "about to call readpng2_cleanup()\n")) + readpng2_cleanup(&rpng2_info); + + if (error) { + fprintf(stderr, PROGNAME ": libpng error while decoding PNG image\n"); + exit(3); + } + + + /* wait for the user to tell us when to quit */ + + while (GetMessage(&msg, NULL, 0, 0)) { + TranslateMessage(&msg); + DispatchMessage(&msg); + } + + + /* we're done: clean up all image and Windows resources and go away */ + + Trace((stderr, "about to call rpng2_win_cleanup()\n")) + rpng2_win_cleanup(); + + return msg.wParam; +} + + + + + +/* this function is called by readpng2_info_callback() in readpng2.c, which + * in turn is called by libpng after all of the pre-IDAT chunks have been + * read and processed--i.e., we now have enough info to finish initializing */ + +static void rpng2_win_init() +{ + ulg i; + ulg rowbytes = rpng2_info.rowbytes; + + Trace((stderr, "beginning rpng2_win_init()\n")) + Trace((stderr, " rowbytes = %d\n", rpng2_info.rowbytes)) + Trace((stderr, " width = %ld\n", rpng2_info.width)) + Trace((stderr, " height = %ld\n", rpng2_info.height)) + + rpng2_info.image_data = (uch *)malloc(rowbytes * rpng2_info.height); + if (!rpng2_info.image_data) { + readpng2_cleanup(&rpng2_info); + return; + } + + rpng2_info.row_pointers = (uch **)malloc(rpng2_info.height * sizeof(uch *)); + if (!rpng2_info.row_pointers) { + free(rpng2_info.image_data); + rpng2_info.image_data = NULL; + readpng2_cleanup(&rpng2_info); + return; + } + + for (i = 0; i < rpng2_info.height; ++i) + rpng2_info.row_pointers[i] = rpng2_info.image_data + i*rowbytes; + +/*--------------------------------------------------------------------------- + Do the basic Windows initialization stuff, make the window, and fill it + with the user-specified, file-specified or default background color. + ---------------------------------------------------------------------------*/ + + if (rpng2_win_create_window()) { + readpng2_cleanup(&rpng2_info); + return; + } + + rpng2_info.state = kWindowInit; +} + + + + + +static int rpng2_win_create_window() +{ + uch bg_red = rpng2_info.bg_red; + uch bg_green = rpng2_info.bg_green; + uch bg_blue = rpng2_info.bg_blue; + uch *dest; + int extra_width, extra_height; + ulg i, j; + WNDCLASSEX wndclass; + RECT rect; + + +/*--------------------------------------------------------------------------- + Allocate memory for the display-specific version of the image (round up + to multiple of 4 for Windows DIB). + ---------------------------------------------------------------------------*/ + + wimage_rowbytes = ((3*rpng2_info.width + 3L) >> 2) << 2; + + if (!(dib = (uch *)malloc(sizeof(BITMAPINFOHEADER) + + wimage_rowbytes*rpng2_info.height))) + { + return 4; /* fail */ + } + +/*--------------------------------------------------------------------------- + Initialize the DIB. Negative height means to use top-down BMP ordering + (must be uncompressed, but that's what we want). Bit count of 1, 4 or 8 + implies a colormap of RGBX quads, but 24-bit BMPs just use B,G,R values + directly => wimage_data begins immediately after BMP header. + ---------------------------------------------------------------------------*/ + + memset(dib, 0, sizeof(BITMAPINFOHEADER)); + bmih = (BITMAPINFOHEADER *)dib; + bmih->biSize = sizeof(BITMAPINFOHEADER); + bmih->biWidth = rpng2_info.width; + bmih->biHeight = -((long)rpng2_info.height); + bmih->biPlanes = 1; + bmih->biBitCount = 24; + bmih->biCompression = 0; + wimage_data = dib + sizeof(BITMAPINFOHEADER); + +/*--------------------------------------------------------------------------- + Fill window with the specified background color (default is black), but + defer loading faked "background image" until window is displayed (may be + slow to compute). Data are in BGR order. + ---------------------------------------------------------------------------*/ + + if (bg_image) { /* just fill with black for now */ + memset(wimage_data, 0, wimage_rowbytes*rpng2_info.height); + } else { + for (j = 0; j < rpng2_info.height; ++j) { + dest = wimage_data + j*wimage_rowbytes; + for (i = rpng2_info.width; i > 0; --i) { + *dest++ = bg_blue; + *dest++ = bg_green; + *dest++ = bg_red; + } + } + } + +/*--------------------------------------------------------------------------- + Set the window parameters. + ---------------------------------------------------------------------------*/ + + memset(&wndclass, 0, sizeof(wndclass)); + + wndclass.cbSize = sizeof(wndclass); + wndclass.style = CS_HREDRAW | CS_VREDRAW; + wndclass.lpfnWndProc = rpng2_win_wndproc; + wndclass.hInstance = global_hInst; + wndclass.hIcon = LoadIcon(NULL, IDI_APPLICATION); + wndclass.hCursor = LoadCursor(NULL, IDC_ARROW); + wndclass.hbrBackground = (HBRUSH)GetStockObject(DKGRAY_BRUSH); + wndclass.lpszMenuName = NULL; + wndclass.lpszClassName = progname; + wndclass.hIconSm = LoadIcon(NULL, IDI_APPLICATION); + + RegisterClassEx(&wndclass); + +/*--------------------------------------------------------------------------- + Finally, create the window. + ---------------------------------------------------------------------------*/ + + extra_width = 2*(GetSystemMetrics(SM_CXBORDER) + + GetSystemMetrics(SM_CXDLGFRAME)); + extra_height = 2*(GetSystemMetrics(SM_CYBORDER) + + GetSystemMetrics(SM_CYDLGFRAME)) + + GetSystemMetrics(SM_CYCAPTION); + + global_hwnd = CreateWindow(progname, titlebar, WS_OVERLAPPEDWINDOW, + CW_USEDEFAULT, CW_USEDEFAULT, rpng2_info.width+extra_width, + rpng2_info.height+extra_height, NULL, NULL, global_hInst, NULL); + + ShowWindow(global_hwnd, global_showmode); + UpdateWindow(global_hwnd); + +/*--------------------------------------------------------------------------- + Now compute the background image and display it. If it fails (memory + allocation), revert to a plain background color. + ---------------------------------------------------------------------------*/ + + if (bg_image) { + static const char *msg = "Computing background image..."; + int x, y, len = strlen(msg); + HDC hdc = GetDC(global_hwnd); + TEXTMETRIC tm; + + GetTextMetrics(hdc, &tm); + x = (rpng2_info.width - len*tm.tmAveCharWidth)/2; + y = (rpng2_info.height - tm.tmHeight)/2; + SetBkMode(hdc, TRANSPARENT); + SetTextColor(hdc, GetSysColor(COLOR_HIGHLIGHTTEXT)); + /* this can still begin out of bounds even if x is positive (???): */ + TextOut(hdc, ((x < 0)? 0 : x), ((y < 0)? 0 : y), msg, len); + ReleaseDC(global_hwnd, hdc); + + rpng2_win_load_bg_image(); /* resets bg_image if fails */ + } + + if (!bg_image) { + for (j = 0; j < rpng2_info.height; ++j) { + dest = wimage_data + j*wimage_rowbytes; + for (i = rpng2_info.width; i > 0; --i) { + *dest++ = bg_blue; + *dest++ = bg_green; + *dest++ = bg_red; + } + } + } + + rect.left = 0L; + rect.top = 0L; + rect.right = (LONG)rpng2_info.width; /* possibly off by one? */ + rect.bottom = (LONG)rpng2_info.height; /* possibly off by one? */ + InvalidateRect(global_hwnd, &rect, FALSE); + UpdateWindow(global_hwnd); /* similar to XFlush() */ + + return 0; + +} /* end function rpng2_win_create_window() */ + + + + + +static int rpng2_win_load_bg_image() +{ + uch *src, *dest; + uch r1, r2, g1, g2, b1, b2; + uch r1_inv, r2_inv, g1_inv, g2_inv, b1_inv, b2_inv; + int k, hmax, max; + int xidx, yidx, yidx_max = (bgscale-1); + int even_odd_vert, even_odd_horiz, even_odd; + int invert_gradient2 = (bg[pat].type & 0x08); + int invert_column; + ulg i, row; + +/*--------------------------------------------------------------------------- + Allocate buffer for fake background image to be used with transparent + images; if this fails, revert to plain background color. + ---------------------------------------------------------------------------*/ + + bg_rowbytes = 3 * rpng2_info.width; + bg_data = (uch *)malloc(bg_rowbytes * rpng2_info.height); + if (!bg_data) { + fprintf(stderr, PROGNAME + ": unable to allocate memory for background image\n"); + bg_image = 0; + return 1; + } + +/*--------------------------------------------------------------------------- + Vertical gradients (ramps) in NxN squares, alternating direction and + colors (N == bgscale). + ---------------------------------------------------------------------------*/ + + if ((bg[pat].type & 0x07) == 0) { + uch r1_min = rgb[bg[pat].rgb1_min].r; + uch g1_min = rgb[bg[pat].rgb1_min].g; + uch b1_min = rgb[bg[pat].rgb1_min].b; + uch r2_min = rgb[bg[pat].rgb2_min].r; + uch g2_min = rgb[bg[pat].rgb2_min].g; + uch b2_min = rgb[bg[pat].rgb2_min].b; + int r1_diff = rgb[bg[pat].rgb1_max].r - r1_min; + int g1_diff = rgb[bg[pat].rgb1_max].g - g1_min; + int b1_diff = rgb[bg[pat].rgb1_max].b - b1_min; + int r2_diff = rgb[bg[pat].rgb2_max].r - r2_min; + int g2_diff = rgb[bg[pat].rgb2_max].g - g2_min; + int b2_diff = rgb[bg[pat].rgb2_max].b - b2_min; + + for (row = 0; row < rpng2_info.height; ++row) { + yidx = row % bgscale; + even_odd_vert = (row / bgscale) & 1; + + r1 = r1_min + (r1_diff * yidx) / yidx_max; + g1 = g1_min + (g1_diff * yidx) / yidx_max; + b1 = b1_min + (b1_diff * yidx) / yidx_max; + r1_inv = r1_min + (r1_diff * (yidx_max-yidx)) / yidx_max; + g1_inv = g1_min + (g1_diff * (yidx_max-yidx)) / yidx_max; + b1_inv = b1_min + (b1_diff * (yidx_max-yidx)) / yidx_max; + + r2 = r2_min + (r2_diff * yidx) / yidx_max; + g2 = g2_min + (g2_diff * yidx) / yidx_max; + b2 = b2_min + (b2_diff * yidx) / yidx_max; + r2_inv = r2_min + (r2_diff * (yidx_max-yidx)) / yidx_max; + g2_inv = g2_min + (g2_diff * (yidx_max-yidx)) / yidx_max; + b2_inv = b2_min + (b2_diff * (yidx_max-yidx)) / yidx_max; + + dest = bg_data + row*bg_rowbytes; + for (i = 0; i < rpng2_info.width; ++i) { + even_odd_horiz = (i / bgscale) & 1; + even_odd = even_odd_vert ^ even_odd_horiz; + invert_column = + (even_odd_horiz && (bg[pat].type & 0x10)); + if (even_odd == 0) { /* gradient #1 */ + if (invert_column) { + *dest++ = r1_inv; + *dest++ = g1_inv; + *dest++ = b1_inv; + } else { + *dest++ = r1; + *dest++ = g1; + *dest++ = b1; + } + } else { /* gradient #2 */ + if ((invert_column && invert_gradient2) || + (!invert_column && !invert_gradient2)) + { + *dest++ = r2; /* not inverted or */ + *dest++ = g2; /* doubly inverted */ + *dest++ = b2; + } else { + *dest++ = r2_inv; + *dest++ = g2_inv; /* singly inverted */ + *dest++ = b2_inv; + } + } + } + } + +/*--------------------------------------------------------------------------- + Soft gradient-diamonds with scale = bgscale. Code contributed by Adam + M. Costello. + ---------------------------------------------------------------------------*/ + + } else if ((bg[pat].type & 0x07) == 1) { + + hmax = (bgscale-1)/2; /* half the max weight of a color */ + max = 2*hmax; /* the max weight of a color */ + + r1 = rgb[bg[pat].rgb1_max].r; + g1 = rgb[bg[pat].rgb1_max].g; + b1 = rgb[bg[pat].rgb1_max].b; + r2 = rgb[bg[pat].rgb2_max].r; + g2 = rgb[bg[pat].rgb2_max].g; + b2 = rgb[bg[pat].rgb2_max].b; + + for (row = 0; row < rpng2_info.height; ++row) { + yidx = row % bgscale; + if (yidx > hmax) + yidx = bgscale-1 - yidx; + dest = bg_data + row*bg_rowbytes; + for (i = 0; i < rpng2_info.width; ++i) { + xidx = i % bgscale; + if (xidx > hmax) + xidx = bgscale-1 - xidx; + k = xidx + yidx; + *dest++ = (k*r1 + (max-k)*r2) / max; + *dest++ = (k*g1 + (max-k)*g2) / max; + *dest++ = (k*b1 + (max-k)*b2) / max; + } + } + +/*--------------------------------------------------------------------------- + Radial "starburst" with azimuthal sinusoids; [eventually number of sinu- + soids will equal bgscale?]. This one is slow but very cool. Code con- + tributed by Pieter S. van der Meulen (originally in Smalltalk). + ---------------------------------------------------------------------------*/ + + } else if ((bg[pat].type & 0x07) == 2) { + uch ch; + int ii, x, y, hw, hh, grayspot; + double freq, rotate, saturate, gray, intensity; + double angle=0.0, aoffset=0.0, maxDist, dist; + double red=0.0, green=0.0, blue=0.0, hue, s, v, f, p, q, t; + + fprintf(stderr, "%s: computing radial background...", + PROGNAME); + fflush(stderr); + + hh = rpng2_info.height / 2; + hw = rpng2_info.width / 2; + + /* variables for radial waves: + * aoffset: number of degrees to rotate hue [CURRENTLY NOT USED] + * freq: number of color beams originating from the center + * grayspot: size of the graying center area (anti-alias) + * rotate: rotation of the beams as a function of radius + * saturate: saturation of beams' shape azimuthally + */ + angle = CLIP(angle, 0.0, 360.0); + grayspot = CLIP(bg[pat].bg_gray, 1, (hh + hw)); + freq = MAX((double)bg[pat].bg_freq, 0.0); + saturate = (double)bg[pat].bg_bsat * 0.1; + rotate = (double)bg[pat].bg_brot * 0.1; + gray = 0.0; + intensity = 0.0; + maxDist = (double)((hw*hw) + (hh*hh)); + + for (row = 0; row < rpng2_info.height; ++row) { + y = row - hh; + dest = bg_data + row*bg_rowbytes; + for (i = 0; i < rpng2_info.width; ++i) { + x = i - hw; + angle = (x == 0)? PI_2 : atan((double)y / (double)x); + gray = (double)MAX(ABS(y), ABS(x)) / grayspot; + gray = MIN(1.0, gray); + dist = (double)((x*x) + (y*y)) / maxDist; + intensity = cos((angle+(rotate*dist*PI)) * freq) * + gray * saturate; + intensity = (MAX(MIN(intensity,1.0),-1.0) + 1.0) * 0.5; + hue = (angle + PI) * INV_PI_360 + aoffset; + s = gray * ((double)(ABS(x)+ABS(y)) / (double)(hw + hh)); + s = MIN(MAX(s,0.0), 1.0); + v = MIN(MAX(intensity,0.0), 1.0); + + if (s == 0.0) { + ch = (uch)(v * 255.0); + *dest++ = ch; + *dest++ = ch; + *dest++ = ch; + } else { + if ((hue < 0.0) || (hue >= 360.0)) + hue -= (((int)(hue / 360.0)) * 360.0); + hue /= 60.0; + ii = (int)hue; + f = hue - (double)ii; + p = (1.0 - s) * v; + q = (1.0 - (s * f)) * v; + t = (1.0 - (s * (1.0 - f))) * v; + if (ii == 0) { red = v; green = t; blue = p; } + else if (ii == 1) { red = q; green = v; blue = p; } + else if (ii == 2) { red = p; green = v; blue = t; } + else if (ii == 3) { red = p; green = q; blue = v; } + else if (ii == 4) { red = t; green = p; blue = v; } + else if (ii == 5) { red = v; green = p; blue = q; } + *dest++ = (uch)(red * 255.0); + *dest++ = (uch)(green * 255.0); + *dest++ = (uch)(blue * 255.0); + } + } + } + fprintf(stderr, "done.\n"); + fflush(stderr); + } + +/*--------------------------------------------------------------------------- + Blast background image to display buffer before beginning PNG decode; + calling function will handle invalidation and UpdateWindow() call. + ---------------------------------------------------------------------------*/ + + for (row = 0; row < rpng2_info.height; ++row) { + src = bg_data + row*bg_rowbytes; + dest = wimage_data + row*wimage_rowbytes; + for (i = rpng2_info.width; i > 0; --i) { + r1 = *src++; + g1 = *src++; + b1 = *src++; + *dest++ = b1; + *dest++ = g1; /* note reverse order */ + *dest++ = r1; + } + } + + return 0; + +} /* end function rpng2_win_load_bg_image() */ + + + + + +static void rpng2_win_display_row(ulg row) +{ + uch bg_red = rpng2_info.bg_red; + uch bg_green = rpng2_info.bg_green; + uch bg_blue = rpng2_info.bg_blue; + uch *src, *src2=NULL, *dest; + uch r, g, b, a; + ulg i; + static int rows=0; + static ulg firstrow; + +/*--------------------------------------------------------------------------- + rows and firstrow simply track how many rows (and which ones) have not + yet been displayed; alternatively, we could call InvalidateRect() for + every row and not bother with the records-keeping. + ---------------------------------------------------------------------------*/ + + Trace((stderr, "beginning rpng2_win_display_row()\n")) + + if (rows == 0) + firstrow = row; /* first row not yet displayed */ + + ++rows; /* count of rows received but not yet displayed */ + +/*--------------------------------------------------------------------------- + Aside from the use of the rpng2_info struct and the lack of an outer + loop (over rows), this routine is identical to rpng_win_display_image() + in the non-progressive version of the program. + ---------------------------------------------------------------------------*/ + + src = rpng2_info.image_data + row*rpng2_info.rowbytes; + if (bg_image) + src2 = bg_data + row*bg_rowbytes; + dest = wimage_data + row*wimage_rowbytes; + + if (rpng2_info.channels == 3) { + for (i = rpng2_info.width; i > 0; --i) { + r = *src++; + g = *src++; + b = *src++; + *dest++ = b; + *dest++ = g; /* note reverse order */ + *dest++ = r; + } + } else /* if (rpng2_info.channels == 4) */ { + for (i = rpng2_info.width; i > 0; --i) { + r = *src++; + g = *src++; + b = *src++; + a = *src++; + if (bg_image) { + bg_red = *src2++; + bg_green = *src2++; + bg_blue = *src2++; + } + if (a == 255) { + *dest++ = b; + *dest++ = g; + *dest++ = r; + } else if (a == 0) { + *dest++ = bg_blue; + *dest++ = bg_green; + *dest++ = bg_red; + } else { + /* this macro (copied from png.h) composites the + * foreground and background values and puts the + * result into the first argument; there are no + * side effects with the first argument */ + alpha_composite(*dest++, b, a, bg_blue); + alpha_composite(*dest++, g, a, bg_green); + alpha_composite(*dest++, r, a, bg_red); + } + } + } + +/*--------------------------------------------------------------------------- + Display after every 16 rows or when on last row. (Region may include + previously displayed lines due to interlacing--i.e., not contiguous.) + ---------------------------------------------------------------------------*/ + + if ((rows & 0xf) == 0 || row == rpng2_info.height-1) { + RECT rect; + + rect.left = 0L; + rect.top = (LONG)firstrow; + rect.right = (LONG)rpng2_info.width; /* possibly off by one? */ + rect.bottom = (LONG)row + 1L; /* possibly off by one? */ + InvalidateRect(global_hwnd, &rect, FALSE); + UpdateWindow(global_hwnd); /* similar to XFlush() */ + rows = 0; + } + +} /* end function rpng2_win_display_row() */ + + + + + +static void rpng2_win_finish_display() +{ + Trace((stderr, "beginning rpng2_win_finish_display()\n")) + + /* last row has already been displayed by rpng2_win_display_row(), so + * we have nothing to do here except set a flag and let the user know + * that the image is done */ + + rpng2_info.state = kDone; + printf( +#ifndef __CYGWIN__ + "Done. Press Q, Esc or mouse button 1 (within image window) to quit.\n" +#else + "Done. Press mouse button 1 (within image window) to quit.\n" +#endif + ); + fflush(stdout); +} + + + + + +static void rpng2_win_cleanup() +{ + if (bg_image && bg_data) { + free(bg_data); + bg_data = NULL; + } + + if (rpng2_info.image_data) { + free(rpng2_info.image_data); + rpng2_info.image_data = NULL; + } + + if (rpng2_info.row_pointers) { + free(rpng2_info.row_pointers); + rpng2_info.row_pointers = NULL; + } + + if (dib) { + free(dib); + dib = NULL; + } +} + + + + + +LRESULT CALLBACK rpng2_win_wndproc(HWND hwnd, UINT iMsg, WPARAM wP, LPARAM lP) +{ + HDC hdc; + PAINTSTRUCT ps; + int rc; + + switch (iMsg) { + case WM_CREATE: + /* one-time processing here, if any */ + return 0; + + case WM_PAINT: + hdc = BeginPaint(hwnd, &ps); + rc = StretchDIBits(hdc, 0, 0, rpng2_info.width, rpng2_info.height, + 0, 0, rpng2_info.width, rpng2_info.height, + wimage_data, (BITMAPINFO *)bmih, + 0, SRCCOPY); + EndPaint(hwnd, &ps); + return 0; + + /* wait for the user to tell us when to quit */ + case WM_CHAR: + switch (wP) { /* only need one, so ignore repeat count */ + case 'q': + case 'Q': + case 0x1B: /* Esc key */ + PostQuitMessage(0); + } + return 0; + + case WM_LBUTTONDOWN: /* another way of quitting */ + case WM_DESTROY: + PostQuitMessage(0); + return 0; + } + + return DefWindowProc(hwnd, iMsg, wP, lP); +} diff --git a/compat/libpng/contrib/gregbook/rpng2-x.c b/compat/libpng/contrib/gregbook/rpng2-x.c new file mode 100755 index 0000000..35d8a9b --- /dev/null +++ b/compat/libpng/contrib/gregbook/rpng2-x.c @@ -0,0 +1,2134 @@ +/*--------------------------------------------------------------------------- + + rpng2 - progressive-model PNG display program rpng2-x.c + + This program decodes and displays PNG files progressively, as if it were + a web browser (though the front end is only set up to read from files). + It supports gamma correction, user-specified background colors, and user- + specified background patterns (for transparent images). This version is + for the X Window System (tested by the author under Unix and by Martin + Zinser under OpenVMS; may work under OS/2 with a little tweaking). + + Thanks to Adam Costello and Pieter S. van der Meulen for the "diamond" + and "radial waves" patterns, respectively. + + to do (someday, maybe): + - fix expose/redraw code: don't draw entire row if only part exposed + - 8-bit (colormapped) X support + - finish resizable checkerboard-gradient (sizes 4-128?) + - use %.1023s to simplify truncation of title-bar string? + + --------------------------------------------------------------------------- + + Changelog: + - 1.01: initial public release + - 1.02: modified to allow abbreviated options; fixed char/uchar mismatch + - 1.10: added support for non-default visuals; fixed X pixel-conversion + - 1.11: added -usleep option for demos; fixed command-line parsing bug + - 1.12: added -pause option for demos and testing + - 1.20: added runtime MMX-enabling/disabling and new -mmx* options + - 1.21: fixed some small X memory leaks (thanks to François Petitjean) + - 1.22: fixed XFreeGC() crash bug (thanks to Patrick Welche) + - 1.23: added -bgpat 0 mode (std white/gray checkerboard, 8x8 squares) + - 1.30: added -loop option for -bgpat (ifdef FEATURE_LOOP); fixed bpp = + 24; added support for X resources (thanks to Gerhard Niklasch) + - 1.31: added code to skip unused chunks (thanks to Glenn Randers-Pehrson) + - 1.32: added AMD64/EM64T support (__x86_64__); added basic expose/redraw + handling + - 2.00: dual-licensed (added GNU GPL) + - 2.01: fixed 64-bit typo in readpng2.c; fixed -pause usage description + - 2.02: fixed improper display of usage screen on PNG error(s); fixed + unexpected-EOF and file-read-error cases; fixed Trace() cut-and- + paste bugs + - 2.03: deleted runtime MMX-enabling/disabling and obsolete -mmx* options + - 2.04: Added "void(foo);" statements to quiet pedantic compiler warnings + about unused variables (GR-P) + - 2.05: Use nanosleep() instead of usleep(), which is deprecated (GR-P). + --------------------------------------------------------------------------- + + Copyright (c) 1998-2010, 2014-2015 Greg Roelofs. All rights reserved. + + This software is provided "as is," without warranty of any kind, + express or implied. In no event shall the author or contributors + be held liable for any damages arising in any way from the use of + this software. + + The contents of this file are DUAL-LICENSED. You may modify and/or + redistribute this software according to the terms of one of the + following two licenses (at your option): + + + LICENSE 1 ("BSD-like with advertising clause"): + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute + it freely, subject to the following restrictions: + + 1. Redistributions of source code must retain the above copyright + notice, disclaimer, and this list of conditions. + 2. Redistributions in binary form must reproduce the above copyright + notice, disclaimer, and this list of conditions in the documenta- + tion and/or other materials provided with the distribution. + 3. All advertising materials mentioning features or use of this + software must display the following acknowledgment: + + This product includes software developed by Greg Roelofs + and contributors for the book, "PNG: The Definitive Guide," + published by O'Reilly and Associates. + + + LICENSE 2 (GNU GPL v2 or later): + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software Foundation, + Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + ---------------------------------------------------------------------------*/ + +#define PROGNAME "rpng2-x" +#define LONGNAME "Progressive PNG Viewer for X" +#define VERSION "2.04 of 15 June 2014" +#define RESNAME "rpng2" /* our X resource application name */ +#define RESCLASS "Rpng" /* our X resource class name */ + +#include +#include +#include +#include +#include /* for jmpbuf declaration in readpng2.h */ +#include +#include /* only for PvdM background code */ +#include +#include +#include +#include /* defines XK_* macros */ + +#if _POSIX_C_SOURCE >= 199309L /* have nanosleep() */ +# undef usleep +# define usleep(usec) { \ + struct timespec ts; \ + ts.tv_sec = 0; \ + ts.tv_nsec = (usec) * 1000; \ + nanosleep(&ts, NULL); } +# endif + +#ifndef usleep /* have neither nanosleep() nor usleep() */ +# define usleep(x) sleep(((x)+499999)/1000000) +#endif + +#ifdef VMS +# include +#endif + +/* all for PvdM background code: */ +#ifndef PI +# define PI 3.141592653589793238 +#endif +#define PI_2 (PI*0.5) +#define INV_PI_360 (360.0 / PI) +#define MAX(a,b) (a>b?a:b) +#define MIN(a,b) (a> 8)) >> 8); \ +} + + +#define INBUFSIZE 4096 /* with pseudo-timing on (1 sec delay/block), this + * block size corresponds roughly to a download + * speed 10% faster than theoretical 33.6K maximum + * (assuming 8 data bits, 1 stop bit and no other + * overhead) */ + +/* local prototypes */ +static void rpng2_x_init (void); +static int rpng2_x_create_window (void); +static int rpng2_x_load_bg_image (void); +static void rpng2_x_display_row (ulg row); +static void rpng2_x_finish_display (void); +static void rpng2_x_redisplay_image (ulg startcol, ulg startrow, + ulg width, ulg height); +#ifdef FEATURE_LOOP +static void rpng2_x_reload_bg_image (void); +static int is_number (char *p); +#endif +static void rpng2_x_cleanup (void); +static int rpng2_x_msb (ulg u32val); + + +static char titlebar[1024], *window_name = titlebar; +static char *appname = LONGNAME; +static char *icon_name = PROGNAME; +static char *res_name = RESNAME; +static char *res_class = RESCLASS; +static char *filename; +static FILE *infile; + +static mainprog_info rpng2_info; + +static uch inbuf[INBUFSIZE]; +static int incount; + +static int pat = 6; /* must be less than num_bgpat */ +static int bg_image = 0; +static int bgscale, bgscale_default = 16; +static ulg bg_rowbytes; +static uch *bg_data; + +int pause_after_pass = FALSE; +int demo_timing = FALSE; +ulg usleep_duration = 0L; + +static struct rgb_color { + uch r, g, b; +} rgb[] = { + { 0, 0, 0}, /* 0: black */ + {255, 255, 255}, /* 1: white */ + {173, 132, 57}, /* 2: tan */ + { 64, 132, 0}, /* 3: medium green */ + {189, 117, 1}, /* 4: gold */ + {253, 249, 1}, /* 5: yellow */ + { 0, 0, 255}, /* 6: blue */ + { 0, 0, 120}, /* 7: medium blue */ + {255, 0, 255}, /* 8: magenta */ + { 64, 0, 64}, /* 9: dark magenta */ + {255, 0, 0}, /* 10: red */ + { 64, 0, 0}, /* 11: dark red */ + {255, 127, 0}, /* 12: orange */ + {192, 96, 0}, /* 13: darker orange */ + { 24, 60, 0}, /* 14: dark green-yellow */ + { 85, 125, 200}, /* 15: ice blue */ + {192, 192, 192} /* 16: Netscape/Mosaic gray */ +}; +/* not used for now, but should be for error-checking: +static int num_rgb = sizeof(rgb) / sizeof(struct rgb_color); + */ + +/* + This whole struct is a fairly cheesy way to keep the number of + command-line options to a minimum. The radial-waves background + type is a particularly poor fit to the integer elements of the + struct...but a few macros and a little fixed-point math will do + wonders for ya. + + type bits: + F E D C B A 9 8 7 6 5 4 3 2 1 0 + | | | | | + | | +-+-+-- 0 = sharp-edged checkerboard + | | 1 = soft diamonds + | | 2 = radial waves + | | 3-7 = undefined + | +-- gradient #2 inverted? + +-- alternating columns inverted? + */ +static struct background_pattern { + ush type; + int rgb1_max, rgb1_min; /* or bg_freq, bg_gray */ + int rgb2_max, rgb2_min; /* or bg_bsat, bg_brot (both scaled by 10)*/ +} bg[] = { + {0, 1,1, 16,16}, /* checkered: white vs. light gray (basic) */ + {0+8, 2,0, 1,15}, /* checkered: tan/black vs. white/ice blue */ + {0+24, 2,0, 1,0}, /* checkered: tan/black vs. white/black */ + {0+8, 4,5, 0,2}, /* checkered: gold/yellow vs. black/tan */ + {0+8, 4,5, 0,6}, /* checkered: gold/yellow vs. black/blue */ + {0, 7,0, 8,9}, /* checkered: deep blue/black vs. magenta */ + {0+8, 13,0, 5,14}, /* checkered: orange/black vs. yellow */ + {0+8, 12,0, 10,11}, /* checkered: orange/black vs. red */ + {1, 7,0, 8,0}, /* diamonds: deep blue/black vs. magenta */ + {1, 12,0, 11,0}, /* diamonds: orange vs. dark red */ + {1, 10,0, 7,0}, /* diamonds: red vs. medium blue */ + {1, 4,0, 5,0}, /* diamonds: gold vs. yellow */ + {1, 3,0, 0,0}, /* diamonds: medium green vs. black */ + {2, 16, 100, 20, 0}, /* radial: ~hard radial color-beams */ + {2, 18, 100, 10, 2}, /* radial: soft, curved radial color-beams */ + {2, 16, 256, 100, 250}, /* radial: very tight spiral */ + {2, 10000, 256, 11, 0} /* radial: dipole-moire' (almost fractal) */ +}; +static int num_bgpat = sizeof(bg) / sizeof(struct background_pattern); + + +/* X-specific variables */ +static char *displayname; +static XImage *ximage; +static Display *display; +static int depth; +static Visual *visual; +static XVisualInfo *visual_list; +static int RShift, GShift, BShift; +static ulg RMask, GMask, BMask; +static Window window; +static GC gc; +static Colormap colormap; + +static int have_nondefault_visual = FALSE; +static int have_colormap = FALSE; +static int have_window = FALSE; +static int have_gc = FALSE; + + + + +int main(int argc, char **argv) +{ +#ifdef sgi + char tmpline[80]; +#endif + char *p, *bgstr = NULL; + int rc, alen, flen; + int error = 0; + int timing = FALSE; + int have_bg = FALSE; +#ifdef FEATURE_LOOP + int loop = FALSE; + long loop_interval = -1; /* seconds (100,000 max) */ +#endif + double LUT_exponent; /* just the lookup table */ + double CRT_exponent = 2.2; /* just the monitor */ + double default_display_exponent; /* whole display system */ + XEvent e; + KeySym k; + + + /* First initialize a few things, just to be sure--memset takes care of + * default background color (black), booleans (FALSE), pointers (NULL), + * etc. */ + + displayname = (char *)NULL; + filename = (char *)NULL; + memset(&rpng2_info, 0, sizeof(mainprog_info)); + + + /* Set the default value for our display-system exponent, i.e., the + * product of the CRT exponent and the exponent corresponding to + * the frame-buffer's lookup table (LUT), if any. This is not an + * exhaustive list of LUT values (e.g., OpenStep has a lot of weird + * ones), but it should cover 99% of the current possibilities. */ + +#if defined(NeXT) + /* third-party utilities can modify the default LUT exponent */ + LUT_exponent = 1.0 / 2.2; + /* + if (some_next_function_that_returns_gamma(&next_gamma)) + LUT_exponent = 1.0 / next_gamma; + */ +#elif defined(sgi) + LUT_exponent = 1.0 / 1.7; + /* there doesn't seem to be any documented function to + * get the "gamma" value, so we do it the hard way */ + infile = fopen("/etc/config/system.glGammaVal", "r"); + if (infile) { + double sgi_gamma; + + fgets(tmpline, 80, infile); + fclose(infile); + sgi_gamma = atof(tmpline); + if (sgi_gamma > 0.0) + LUT_exponent = 1.0 / sgi_gamma; + } +#elif defined(Macintosh) + LUT_exponent = 1.8 / 2.61; + /* + if (some_mac_function_that_returns_gamma(&mac_gamma)) + LUT_exponent = mac_gamma / 2.61; + */ +#else + LUT_exponent = 1.0; /* assume no LUT: most PCs */ +#endif + + /* the defaults above give 1.0, 1.3, 1.5 and 2.2, respectively: */ + default_display_exponent = LUT_exponent * CRT_exponent; + + + /* If the user has set the SCREEN_GAMMA environment variable as suggested + * (somewhat imprecisely) in the libpng documentation, use that; otherwise + * use the default value we just calculated. Either way, the user may + * override this via a command-line option. */ + + if ((p = getenv("SCREEN_GAMMA")) != NULL) + rpng2_info.display_exponent = atof(p); + else + rpng2_info.display_exponent = default_display_exponent; + + + /* Now parse the command line for options and the PNG filename. */ + + while (*++argv && !error) { + if (!strncmp(*argv, "-display", 2)) { + if (!*++argv) + ++error; + else + displayname = *argv; + } else if (!strncmp(*argv, "-gamma", 2)) { + if (!*++argv) + ++error; + else { + rpng2_info.display_exponent = atof(*argv); + if (rpng2_info.display_exponent <= 0.0) + ++error; + } + } else if (!strncmp(*argv, "-bgcolor", 4)) { + if (!*++argv) + ++error; + else { + bgstr = *argv; + if (strlen(bgstr) != 7 || bgstr[0] != '#') + ++error; + else { + have_bg = TRUE; + bg_image = FALSE; + } + } + } else if (!strncmp(*argv, "-bgpat", 4)) { + if (!*++argv) + ++error; + else { + pat = atoi(*argv); + if (pat >= 0 && pat < num_bgpat) { + bg_image = TRUE; + have_bg = FALSE; + } else + ++error; + } + } else if (!strncmp(*argv, "-usleep", 2)) { + if (!*++argv) + ++error; + else { + usleep_duration = (ulg)atol(*argv); + demo_timing = TRUE; + } + } else if (!strncmp(*argv, "-pause", 2)) { + pause_after_pass = TRUE; + } else if (!strncmp(*argv, "-timing", 2)) { + timing = TRUE; +#ifdef FEATURE_LOOP + } else if (!strncmp(*argv, "-loop", 2)) { + loop = TRUE; + if (!argv[1] || !is_number(argv[1])) + loop_interval = 2; + else { + ++argv; + loop_interval = atol(*argv); + if (loop_interval < 0) + loop_interval = 2; + else if (loop_interval > 100000) /* bit more than one day */ + loop_interval = 100000; + } +#endif + } else { + if (**argv != '-') { + filename = *argv; + if (argv[1]) /* shouldn't be any more args after filename */ + ++error; + } else + ++error; /* not expecting any other options */ + } + } + + if (!filename) + ++error; + + + /* print usage screen if any errors up to this point */ + + if (error) { + fprintf(stderr, "\n%s %s: %s\n\n", PROGNAME, VERSION, appname); + readpng2_version_info(); + fprintf(stderr, "\n" + "Usage: "); + fprintf(stderr, + "%s [-display xdpy] [-gamma exp] [-bgcolor bg | -bgpat pat]\n" + " %*s [-usleep dur | -timing] [-pause]\n", + PROGNAME, (int)strlen(PROGNAME), " "); + fprintf(stderr, +#ifdef FEATURE_LOOP + " [-loop [sec]]" +#endif + " file.png\n\n"); + fprintf(stderr, + " xdpy\tname of the target X display (e.g., ``hostname:0'')\n" + " exp \ttransfer-function exponent (``gamma'') of the display\n" + "\t\t system in floating-point format (e.g., ``%.1f''); equal\n" + "\t\t to the product of the lookup-table exponent (varies)\n", + default_display_exponent); + fprintf(stderr, + "\t\t and the CRT exponent (usually 2.2); must be positive\n" + " bg \tdesired background color in 7-character hex RGB format\n" + "\t\t (e.g., ``#ff7700'' for orange: same as HTML colors);\n" + "\t\t used with transparent images; overrides -bgpat\n" + " pat \tdesired background pattern number (0-%d); used with\n" + "\t\t transparent images; overrides -bgcolor\n", + num_bgpat-1); +#ifdef FEATURE_LOOP + fprintf(stderr, + " -loop\tloops through background images after initial display\n" + "\t\t is complete (depends on -bgpat)\n" + " sec \tseconds to display each background image (default = 2)\n"); +#endif + fprintf(stderr, + " dur \tduration in microseconds to wait after displaying each\n" + "\t\t row (for demo purposes)\n" + " -timing\tenables delay for every block read, to simulate modem\n" + "\t\t download of image (~36 Kbps)\n" + " -pause\tpauses after displaying each pass until mouse clicked\n" + "\nPress Q, Esc or mouse button 1 (within image window, after image\n" + "is displayed) to quit.\n"); + exit(1); + } + + if (!(infile = fopen(filename, "rb"))) { + fprintf(stderr, PROGNAME ": can't open PNG file [%s]\n", filename); + ++error; + } else { + incount = fread(inbuf, 1, INBUFSIZE, infile); + if (incount < 8 || !readpng2_check_sig(inbuf, 8)) { + fprintf(stderr, PROGNAME + ": [%s] is not a PNG file: incorrect signature\n", + filename); + ++error; + } else if ((rc = readpng2_init(&rpng2_info)) != 0) { + switch (rc) { + case 2: + fprintf(stderr, PROGNAME + ": [%s] has bad IHDR (libpng longjmp)\n", filename); + break; + case 4: + fprintf(stderr, PROGNAME ": insufficient memory\n"); + break; + default: + fprintf(stderr, PROGNAME + ": unknown readpng2_init() error\n"); + break; + } + ++error; + } else { + Trace((stderr, "about to call XOpenDisplay()\n")) + display = XOpenDisplay(displayname); + if (!display) { + readpng2_cleanup(&rpng2_info); + fprintf(stderr, PROGNAME ": can't open X display [%s]\n", + displayname? displayname : "default"); + ++error; + } + } + if (error) + fclose(infile); + } + + + if (error) { + fprintf(stderr, PROGNAME ": aborting.\n"); + exit(2); + } + + + /* set the title-bar string, but make sure buffer doesn't overflow */ + + alen = strlen(appname); + flen = strlen(filename); + if (alen + flen + 3 > 1023) + sprintf(titlebar, "%s: ...%s", appname, filename+(alen+flen+6-1023)); + else + sprintf(titlebar, "%s: %s", appname, filename); + + + /* set some final rpng2_info variables before entering main data loop */ + + if (have_bg) { + unsigned r, g, b; /* this approach quiets compiler warnings */ + + sscanf(bgstr+1, "%2x%2x%2x", &r, &g, &b); + rpng2_info.bg_red = (uch)r; + rpng2_info.bg_green = (uch)g; + rpng2_info.bg_blue = (uch)b; + } else + rpng2_info.need_bgcolor = TRUE; + + rpng2_info.state = kPreInit; + rpng2_info.mainprog_init = rpng2_x_init; + rpng2_info.mainprog_display_row = rpng2_x_display_row; + rpng2_info.mainprog_finish_display = rpng2_x_finish_display; + + + /* OK, this is the fun part: call readpng2_decode_data() at the start of + * the loop to deal with our first buffer of data (read in above to verify + * that the file is a PNG image), then loop through the file and continue + * calling the same routine to handle each chunk of data. It in turn + * passes the data to libpng, which will invoke one or more of our call- + * backs as decoded data become available. We optionally call sleep() for + * one second per iteration to simulate downloading the image via an analog + * modem. */ + + for (;;) { + Trace((stderr, "about to call readpng2_decode_data()\n")) + if (readpng2_decode_data(&rpng2_info, inbuf, incount)) + ++error; + Trace((stderr, "done with readpng2_decode_data()\n")) + + if (error || incount != INBUFSIZE || rpng2_info.state == kDone) { + if (rpng2_info.state == kDone) { + Trace((stderr, "done decoding PNG image\n")) + } else if (ferror(infile)) { + fprintf(stderr, PROGNAME + ": error while reading PNG image file\n"); + exit(3); + } else if (feof(infile)) { + fprintf(stderr, PROGNAME ": end of file reached " + "(unexpectedly) while reading PNG image file\n"); + exit(3); + } else /* if (error) */ { + /* will print error message below */ + } + break; + } + + if (timing) + sleep(1); + + incount = fread(inbuf, 1, INBUFSIZE, infile); + } + + + /* clean up PNG stuff and report any decoding errors */ + + fclose(infile); + Trace((stderr, "about to call readpng2_cleanup()\n")) + readpng2_cleanup(&rpng2_info); + + if (error) { + fprintf(stderr, PROGNAME ": libpng error while decoding PNG image\n"); + exit(3); + } + + +#ifdef FEATURE_LOOP + + if (loop && bg_image) { + Trace((stderr, "entering -loop loop (FEATURE_LOOP)\n")) + for (;;) { + int i, use_sleep; + struct timeval now, then; + + /* get current time and add loop_interval to get target time */ + if (gettimeofday(&then, NULL) == 0) { + then.tv_sec += loop_interval; + use_sleep = FALSE; + } else + use_sleep = TRUE; + + /* do quick check for a quit event but don't wait for it */ + /* GRR BUG: should also check for Expose events and redraw... */ + if (XCheckMaskEvent(display, KeyPressMask | ButtonPressMask, &e)) + if (QUIT(e,k)) + break; + + /* generate next background image */ + if (++pat >= num_bgpat) + pat = 0; + rpng2_x_reload_bg_image(); + + /* wait for timeout, using whatever means are available */ + if (use_sleep || gettimeofday(&now, NULL) != 0) { + for (i = loop_interval; i > 0; --i) { + sleep(1); + /* GRR BUG: also need to check for Expose (and redraw!) */ + if (XCheckMaskEvent(display, KeyPressMask | ButtonPressMask, + &e) && QUIT(e,k)) + break; + } + } else { + /* Y2038 BUG! */ + if (now.tv_sec < then.tv_sec || + (now.tv_sec == then.tv_sec && now.tv_usec < then.tv_usec)) + { + int quit = FALSE; + long seconds_to_go = then.tv_sec - now.tv_sec; + long usleep_usec; + + /* basically chew up most of remaining loop-interval with + * calls to sleep(1) interleaved with checks for quit + * events, but also recalc time-to-go periodically; when + * done, clean up any remaining time with usleep() call + * (could also use SIGALRM, but signals are a pain...) */ + while (seconds_to_go-- > 1) { + int seconds_done = 0; + + for (i = seconds_to_go; i > 0 && !quit; --i) { + sleep(1); + /* GRR BUG: need to check for Expose and redraw */ + if (XCheckMaskEvent(display, KeyPressMask | + ButtonPressMask, &e) && QUIT(e,k)) + quit = TRUE; + if (++seconds_done > 1000) + break; /* time to redo seconds_to_go meas. */ + } + if (quit) + break; + + /* OK, more than 1000 seconds since last check: + * correct the time-to-go measurement for drift */ + if (gettimeofday(&now, NULL) == 0) { + if (now.tv_sec >= then.tv_sec) + break; + seconds_to_go = then.tv_sec - now.tv_sec; + } else + ++seconds_to_go; /* restore what we subtracted */ + } + if (quit) + break; /* breaks outer do-loop, skips redisplay */ + + /* since difference between "now" and "then" is already + * eaten up to within a couple of seconds, don't need to + * worry about overflow--but might have overshot (neg.) */ + if (gettimeofday(&now, NULL) == 0) { + usleep_usec = 1000000L*(then.tv_sec - now.tv_sec) + + then.tv_usec - now.tv_usec; + if (usleep_usec > 0) + usleep((ulg)usleep_usec); + } + } + } + + /* composite image against new background and display (note that + * we do not take into account the time spent doing this...) */ + rpng2_x_redisplay_image (0, 0, rpng2_info.width, rpng2_info.height); + } + + } else /* FALL THROUGH and do the normal thing */ + +#endif /* FEATURE_LOOP */ + + /* wait for the user to tell us when to quit */ + + if (rpng2_info.state >= kWindowInit) { + Trace((stderr, "entering final wait-for-quit-event loop\n")) + do { + XNextEvent(display, &e); + if (e.type == Expose) { + XExposeEvent *ex = (XExposeEvent *)&e; + rpng2_x_redisplay_image (ex->x, ex->y, ex->width, ex->height); + } + } while (!QUIT(e,k)); + } else { + fprintf(stderr, PROGNAME ": init callback never called: probable " + "libpng error while decoding PNG metadata\n"); + exit(4); + } + + + /* we're done: clean up all image and X resources and go away */ + + Trace((stderr, "about to call rpng2_x_cleanup()\n")) + rpng2_x_cleanup(); + + (void)argc; /* Unused */ + + return 0; +} + + + + + +/* this function is called by readpng2_info_callback() in readpng2.c, which + * in turn is called by libpng after all of the pre-IDAT chunks have been + * read and processed--i.e., we now have enough info to finish initializing */ + +static void rpng2_x_init(void) +{ + ulg i; + ulg rowbytes = rpng2_info.rowbytes; + + Trace((stderr, "beginning rpng2_x_init()\n")) + Trace((stderr, " rowbytes = %d\n", rpng2_info.rowbytes)) + Trace((stderr, " width = %ld\n", rpng2_info.width)) + Trace((stderr, " height = %ld\n", rpng2_info.height)) + + rpng2_info.image_data = (uch *)malloc(rowbytes * rpng2_info.height); + if (!rpng2_info.image_data) { + readpng2_cleanup(&rpng2_info); + return; + } + + rpng2_info.row_pointers = (uch **)malloc(rpng2_info.height * sizeof(uch *)); + if (!rpng2_info.row_pointers) { + free(rpng2_info.image_data); + rpng2_info.image_data = NULL; + readpng2_cleanup(&rpng2_info); + return; + } + + for (i = 0; i < rpng2_info.height; ++i) + rpng2_info.row_pointers[i] = rpng2_info.image_data + i*rowbytes; + + + /* do the basic X initialization stuff, make the window, and fill it with + * the user-specified, file-specified or default background color or + * pattern */ + + if (rpng2_x_create_window()) { + + /* GRR TEMPORARY HACK: this is fundamentally no different from cases + * above; libpng should call our error handler to longjmp() back to us + * when png_ptr goes away. If we/it segfault instead, seems like a + * libpng bug... */ + + /* we're here via libpng callback, so if window fails, clean and bail */ + readpng2_cleanup(&rpng2_info); + rpng2_x_cleanup(); + exit(2); + } + + rpng2_info.state = kWindowInit; +} + + + + + +static int rpng2_x_create_window(void) +{ + ulg bg_red = rpng2_info.bg_red; + ulg bg_green = rpng2_info.bg_green; + ulg bg_blue = rpng2_info.bg_blue; + ulg bg_pixel = 0L; + ulg attrmask; + int need_colormap = FALSE; + int screen, pad; + uch *xdata; + Window root; + XEvent e; + XGCValues gcvalues; + XSetWindowAttributes attr; + XTextProperty windowName, *pWindowName = &windowName; + XTextProperty iconName, *pIconName = &iconName; + XVisualInfo visual_info; + XSizeHints *size_hints; + XWMHints *wm_hints; + XClassHint *class_hints; + + + Trace((stderr, "beginning rpng2_x_create_window()\n")) + + screen = DefaultScreen(display); + depth = DisplayPlanes(display, screen); + root = RootWindow(display, screen); + +#ifdef DEBUG + XSynchronize(display, True); +#endif + + if (depth != 16 && depth != 24 && depth != 32) { + int visuals_matched = 0; + + Trace((stderr, "default depth is %d: checking other visuals\n", + depth)) + + /* 24-bit first */ + visual_info.screen = screen; + visual_info.depth = 24; + visual_list = XGetVisualInfo(display, + VisualScreenMask | VisualDepthMask, &visual_info, &visuals_matched); + if (visuals_matched == 0) { +/* GRR: add 15-, 16- and 32-bit TrueColor visuals (also DirectColor?) */ + fprintf(stderr, "default screen depth %d not supported, and no" + " 24-bit visuals found\n", depth); + return 2; + } + Trace((stderr, "XGetVisualInfo() returned %d 24-bit visuals\n", + visuals_matched)) + visual = visual_list[0].visual; + depth = visual_list[0].depth; +/* + colormap_size = visual_list[0].colormap_size; + visual_class = visual->class; + visualID = XVisualIDFromVisual(visual); + */ + have_nondefault_visual = TRUE; + need_colormap = TRUE; + } else { + XMatchVisualInfo(display, screen, depth, TrueColor, &visual_info); + visual = visual_info.visual; + } + + RMask = visual->red_mask; + GMask = visual->green_mask; + BMask = visual->blue_mask; + +/* GRR: add/check 8-bit support */ + if (depth == 8 || need_colormap) { + colormap = XCreateColormap(display, root, visual, AllocNone); + if (!colormap) { + fprintf(stderr, "XCreateColormap() failed\n"); + return 2; + } + have_colormap = TRUE; + if (depth == 8) + bg_image = FALSE; /* gradient just wastes palette entries */ + } + if (depth == 15 || depth == 16) { + RShift = 15 - rpng2_x_msb(RMask); /* these are right-shifts */ + GShift = 15 - rpng2_x_msb(GMask); + BShift = 15 - rpng2_x_msb(BMask); + } else if (depth > 16) { + RShift = rpng2_x_msb(RMask) - 7; /* these are left-shifts */ + GShift = rpng2_x_msb(GMask) - 7; + BShift = rpng2_x_msb(BMask) - 7; + } + if (depth >= 15 && (RShift < 0 || GShift < 0 || BShift < 0)) { + fprintf(stderr, "rpng2 internal logic error: negative X shift(s)!\n"); + return 2; + } + +/*--------------------------------------------------------------------------- + Finally, create the window. + ---------------------------------------------------------------------------*/ + + attr.backing_store = Always; + attr.event_mask = ExposureMask | KeyPressMask | ButtonPressMask; + attrmask = CWBackingStore | CWEventMask; + if (have_nondefault_visual) { + attr.colormap = colormap; + attr.background_pixel = 0; + attr.border_pixel = 1; + attrmask |= CWColormap | CWBackPixel | CWBorderPixel; + } + + window = XCreateWindow(display, root, 0, 0, rpng2_info.width, + rpng2_info.height, 0, depth, InputOutput, visual, attrmask, &attr); + + if (window == None) { + fprintf(stderr, "XCreateWindow() failed\n"); + return 2; + } else + have_window = TRUE; + + if (depth == 8) + XSetWindowColormap(display, window, colormap); + + if (!XStringListToTextProperty(&window_name, 1, pWindowName)) + pWindowName = NULL; + if (!XStringListToTextProperty(&icon_name, 1, pIconName)) + pIconName = NULL; + + /* OK if either hints allocation fails; XSetWMProperties() allows NULLs */ + + if ((size_hints = XAllocSizeHints()) != NULL) { + /* window will not be resizable */ + size_hints->flags = PMinSize | PMaxSize; + size_hints->min_width = size_hints->max_width = (int)rpng2_info.width; + size_hints->min_height = size_hints->max_height = + (int)rpng2_info.height; + } + + if ((wm_hints = XAllocWMHints()) != NULL) { + wm_hints->initial_state = NormalState; + wm_hints->input = True; + /* wm_hints->icon_pixmap = icon_pixmap; */ + wm_hints->flags = StateHint | InputHint /* | IconPixmapHint */ ; + } + + if ((class_hints = XAllocClassHint()) != NULL) { + class_hints->res_name = res_name; + class_hints->res_class = res_class; + } + + XSetWMProperties(display, window, pWindowName, pIconName, NULL, 0, + size_hints, wm_hints, class_hints); + + /* various properties and hints no longer needed; free memory */ + if (pWindowName) + XFree(pWindowName->value); + if (pIconName) + XFree(pIconName->value); + if (size_hints) + XFree(size_hints); + if (wm_hints) + XFree(wm_hints); + if (class_hints) + XFree(class_hints); + + XMapWindow(display, window); + + gc = XCreateGC(display, window, 0, &gcvalues); + have_gc = TRUE; + +/*--------------------------------------------------------------------------- + Allocate memory for the X- and display-specific version of the image. + ---------------------------------------------------------------------------*/ + + if (depth == 24 || depth == 32) { + xdata = (uch *)malloc(4*rpng2_info.width*rpng2_info.height); + pad = 32; + } else if (depth == 16) { + xdata = (uch *)malloc(2*rpng2_info.width*rpng2_info.height); + pad = 16; + } else /* depth == 8 */ { + xdata = (uch *)malloc(rpng2_info.width*rpng2_info.height); + pad = 8; + } + + if (!xdata) { + fprintf(stderr, PROGNAME ": unable to allocate image memory\n"); + return 4; + } + + ximage = XCreateImage(display, visual, depth, ZPixmap, 0, + (char *)xdata, rpng2_info.width, rpng2_info.height, pad, 0); + + if (!ximage) { + fprintf(stderr, PROGNAME ": XCreateImage() failed\n"); + free(xdata); + return 3; + } + + /* to avoid testing the byte order every pixel (or doubling the size of + * the drawing routine with a giant if-test), we arbitrarily set the byte + * order to MSBFirst and let Xlib worry about inverting things on little- + * endian machines (e.g., Linux/x86, old VAXen, etc.)--this is not the + * most efficient approach (the giant if-test would be better), but in + * the interest of clarity, we'll take the easy way out... */ + + ximage->byte_order = MSBFirst; + +/*--------------------------------------------------------------------------- + Fill window with the specified background color (default is black) or + faked "background image" (but latter is disabled if 8-bit; gradients + just waste palette entries). + ---------------------------------------------------------------------------*/ + + if (bg_image) + rpng2_x_load_bg_image(); /* resets bg_image if fails */ + + if (!bg_image) { + if (depth == 24 || depth == 32) { + bg_pixel = (bg_red << RShift) | + (bg_green << GShift) | + (bg_blue << BShift); + } else if (depth == 16) { + bg_pixel = (((bg_red << 8) >> RShift) & RMask) | + (((bg_green << 8) >> GShift) & GMask) | + (((bg_blue << 8) >> BShift) & BMask); + } else /* depth == 8 */ { + + /* GRR: add 8-bit support */ + + } + XSetForeground(display, gc, bg_pixel); + XFillRectangle(display, window, gc, 0, 0, rpng2_info.width, + rpng2_info.height); + } + +/*--------------------------------------------------------------------------- + Wait for first Expose event to do any drawing, then flush and return. + ---------------------------------------------------------------------------*/ + + do + XNextEvent(display, &e); + while (e.type != Expose || e.xexpose.count); + + XFlush(display); + + return 0; + +} /* end function rpng2_x_create_window() */ + + + + + +static int rpng2_x_load_bg_image(void) +{ + uch *src; + char *dest; + uch r1, r2, g1, g2, b1, b2; + uch r1_inv, r2_inv, g1_inv, g2_inv, b1_inv, b2_inv; + int k, hmax, max; + int xidx, yidx, yidx_max; + int even_odd_vert, even_odd_horiz, even_odd; + int invert_gradient2 = (bg[pat].type & 0x08); + int invert_column; + int ximage_rowbytes = ximage->bytes_per_line; + ulg i, row; + ulg pixel; + +/*--------------------------------------------------------------------------- + Allocate buffer for fake background image to be used with transparent + images; if this fails, revert to plain background color. + ---------------------------------------------------------------------------*/ + + bg_rowbytes = 3 * rpng2_info.width; + bg_data = (uch *)malloc(bg_rowbytes * rpng2_info.height); + if (!bg_data) { + fprintf(stderr, PROGNAME + ": unable to allocate memory for background image\n"); + bg_image = 0; + return 1; + } + + bgscale = (pat == 0)? 8 : bgscale_default; + yidx_max = bgscale - 1; + +/*--------------------------------------------------------------------------- + Vertical gradients (ramps) in NxN squares, alternating direction and + colors (N == bgscale). + ---------------------------------------------------------------------------*/ + + if ((bg[pat].type & 0x07) == 0) { + uch r1_min = rgb[bg[pat].rgb1_min].r; + uch g1_min = rgb[bg[pat].rgb1_min].g; + uch b1_min = rgb[bg[pat].rgb1_min].b; + uch r2_min = rgb[bg[pat].rgb2_min].r; + uch g2_min = rgb[bg[pat].rgb2_min].g; + uch b2_min = rgb[bg[pat].rgb2_min].b; + int r1_diff = rgb[bg[pat].rgb1_max].r - r1_min; + int g1_diff = rgb[bg[pat].rgb1_max].g - g1_min; + int b1_diff = rgb[bg[pat].rgb1_max].b - b1_min; + int r2_diff = rgb[bg[pat].rgb2_max].r - r2_min; + int g2_diff = rgb[bg[pat].rgb2_max].g - g2_min; + int b2_diff = rgb[bg[pat].rgb2_max].b - b2_min; + + for (row = 0; row < rpng2_info.height; ++row) { + yidx = (int)(row % bgscale); + even_odd_vert = (int)((row / bgscale) & 1); + + r1 = r1_min + (r1_diff * yidx) / yidx_max; + g1 = g1_min + (g1_diff * yidx) / yidx_max; + b1 = b1_min + (b1_diff * yidx) / yidx_max; + r1_inv = r1_min + (r1_diff * (yidx_max-yidx)) / yidx_max; + g1_inv = g1_min + (g1_diff * (yidx_max-yidx)) / yidx_max; + b1_inv = b1_min + (b1_diff * (yidx_max-yidx)) / yidx_max; + + r2 = r2_min + (r2_diff * yidx) / yidx_max; + g2 = g2_min + (g2_diff * yidx) / yidx_max; + b2 = b2_min + (b2_diff * yidx) / yidx_max; + r2_inv = r2_min + (r2_diff * (yidx_max-yidx)) / yidx_max; + g2_inv = g2_min + (g2_diff * (yidx_max-yidx)) / yidx_max; + b2_inv = b2_min + (b2_diff * (yidx_max-yidx)) / yidx_max; + + dest = (char *)bg_data + row*bg_rowbytes; + for (i = 0; i < rpng2_info.width; ++i) { + even_odd_horiz = (int)((i / bgscale) & 1); + even_odd = even_odd_vert ^ even_odd_horiz; + invert_column = + (even_odd_horiz && (bg[pat].type & 0x10)); + if (even_odd == 0) { /* gradient #1 */ + if (invert_column) { + *dest++ = r1_inv; + *dest++ = g1_inv; + *dest++ = b1_inv; + } else { + *dest++ = r1; + *dest++ = g1; + *dest++ = b1; + } + } else { /* gradient #2 */ + if ((invert_column && invert_gradient2) || + (!invert_column && !invert_gradient2)) + { + *dest++ = r2; /* not inverted or */ + *dest++ = g2; /* doubly inverted */ + *dest++ = b2; + } else { + *dest++ = r2_inv; + *dest++ = g2_inv; /* singly inverted */ + *dest++ = b2_inv; + } + } + } + } + +/*--------------------------------------------------------------------------- + Soft gradient-diamonds with scale = bgscale. Code contributed by Adam + M. Costello. + ---------------------------------------------------------------------------*/ + + } else if ((bg[pat].type & 0x07) == 1) { + + hmax = (bgscale-1)/2; /* half the max weight of a color */ + max = 2*hmax; /* the max weight of a color */ + + r1 = rgb[bg[pat].rgb1_max].r; + g1 = rgb[bg[pat].rgb1_max].g; + b1 = rgb[bg[pat].rgb1_max].b; + r2 = rgb[bg[pat].rgb2_max].r; + g2 = rgb[bg[pat].rgb2_max].g; + b2 = rgb[bg[pat].rgb2_max].b; + + for (row = 0; row < rpng2_info.height; ++row) { + yidx = (int)(row % bgscale); + if (yidx > hmax) + yidx = bgscale-1 - yidx; + dest = (char *)bg_data + row*bg_rowbytes; + for (i = 0; i < rpng2_info.width; ++i) { + xidx = (int)(i % bgscale); + if (xidx > hmax) + xidx = bgscale-1 - xidx; + k = xidx + yidx; + *dest++ = (k*r1 + (max-k)*r2) / max; + *dest++ = (k*g1 + (max-k)*g2) / max; + *dest++ = (k*b1 + (max-k)*b2) / max; + } + } + +/*--------------------------------------------------------------------------- + Radial "starburst" with azimuthal sinusoids; [eventually number of sinu- + soids will equal bgscale?]. This one is slow but very cool. Code con- + tributed by Pieter S. van der Meulen (originally in Smalltalk). + ---------------------------------------------------------------------------*/ + + } else if ((bg[pat].type & 0x07) == 2) { + uch ch; + int ii, x, y, hw, hh, grayspot; + double freq, rotate, saturate, gray, intensity; + double angle=0.0, aoffset=0.0, maxDist, dist; + double red=0.0, green=0.0, blue=0.0, hue, s, v, f, p, q, t; + + fprintf(stderr, "%s: computing radial background...", + PROGNAME); + fflush(stderr); + + hh = (int)(rpng2_info.height / 2); + hw = (int)(rpng2_info.width / 2); + + /* variables for radial waves: + * aoffset: number of degrees to rotate hue [CURRENTLY NOT USED] + * freq: number of color beams originating from the center + * grayspot: size of the graying center area (anti-alias) + * rotate: rotation of the beams as a function of radius + * saturate: saturation of beams' shape azimuthally + */ + angle = CLIP(angle, 0.0, 360.0); + grayspot = CLIP(bg[pat].bg_gray, 1, (hh + hw)); + freq = MAX((double)bg[pat].bg_freq, 0.0); + saturate = (double)bg[pat].bg_bsat * 0.1; + rotate = (double)bg[pat].bg_brot * 0.1; + gray = 0.0; + intensity = 0.0; + maxDist = (double)((hw*hw) + (hh*hh)); + + for (row = 0; row < rpng2_info.height; ++row) { + y = (int)(row - hh); + dest = (char *)bg_data + row*bg_rowbytes; + for (i = 0; i < rpng2_info.width; ++i) { + x = (int)(i - hw); + angle = (x == 0)? PI_2 : atan((double)y / (double)x); + gray = (double)MAX(ABS(y), ABS(x)) / grayspot; + gray = MIN(1.0, gray); + dist = (double)((x*x) + (y*y)) / maxDist; + intensity = cos((angle+(rotate*dist*PI)) * freq) * + gray * saturate; + intensity = (MAX(MIN(intensity,1.0),-1.0) + 1.0) * 0.5; + hue = (angle + PI) * INV_PI_360 + aoffset; + s = gray * ((double)(ABS(x)+ABS(y)) / (double)(hw + hh)); + s = MIN(MAX(s,0.0), 1.0); + v = MIN(MAX(intensity,0.0), 1.0); + + if (s == 0.0) { + ch = (uch)(v * 255.0); + *dest++ = ch; + *dest++ = ch; + *dest++ = ch; + } else { + if ((hue < 0.0) || (hue >= 360.0)) + hue -= (((int)(hue / 360.0)) * 360.0); + hue /= 60.0; + ii = (int)hue; + f = hue - (double)ii; + p = (1.0 - s) * v; + q = (1.0 - (s * f)) * v; + t = (1.0 - (s * (1.0 - f))) * v; + if (ii == 0) { red = v; green = t; blue = p; } + else if (ii == 1) { red = q; green = v; blue = p; } + else if (ii == 2) { red = p; green = v; blue = t; } + else if (ii == 3) { red = p; green = q; blue = v; } + else if (ii == 4) { red = t; green = p; blue = v; } + else if (ii == 5) { red = v; green = p; blue = q; } + *dest++ = (uch)(red * 255.0); + *dest++ = (uch)(green * 255.0); + *dest++ = (uch)(blue * 255.0); + } + } + } + fprintf(stderr, "done.\n"); + fflush(stderr); + } + +/*--------------------------------------------------------------------------- + Blast background image to display buffer before beginning PNG decode. + ---------------------------------------------------------------------------*/ + + if (depth == 24 || depth == 32) { + ulg red, green, blue; + int bpp = ximage->bits_per_pixel; + + for (row = 0; row < rpng2_info.height; ++row) { + src = bg_data + row*bg_rowbytes; + dest = ximage->data + row*ximage_rowbytes; + if (bpp == 32) { /* slightly optimized version */ + for (i = rpng2_info.width; i > 0; --i) { + red = *src++; + green = *src++; + blue = *src++; + pixel = (red << RShift) | + (green << GShift) | + (blue << BShift); + /* recall that we set ximage->byte_order = MSBFirst above */ + *dest++ = (char)((pixel >> 24) & 0xff); + *dest++ = (char)((pixel >> 16) & 0xff); + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } + } else { + for (i = rpng2_info.width; i > 0; --i) { + red = *src++; + green = *src++; + blue = *src++; + pixel = (red << RShift) | + (green << GShift) | + (blue << BShift); + /* recall that we set ximage->byte_order = MSBFirst above */ + /* GRR BUG? this assumes bpp == 24 & bits are packed low */ + /* (probably need to use RShift, RMask, etc.) */ + *dest++ = (char)((pixel >> 16) & 0xff); + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } + } + } + + } else if (depth == 16) { + ush red, green, blue; + + for (row = 0; row < rpng2_info.height; ++row) { + src = bg_data + row*bg_rowbytes; + dest = ximage->data + row*ximage_rowbytes; + for (i = rpng2_info.width; i > 0; --i) { + red = ((ush)(*src) << 8); ++src; + green = ((ush)(*src) << 8); ++src; + blue = ((ush)(*src) << 8); ++src; + pixel = ((red >> RShift) & RMask) | + ((green >> GShift) & GMask) | + ((blue >> BShift) & BMask); + /* recall that we set ximage->byte_order = MSBFirst above */ + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } + } + + } else /* depth == 8 */ { + + /* GRR: add 8-bit support */ + + } + + XPutImage(display, window, gc, ximage, 0, 0, 0, 0, rpng2_info.width, + rpng2_info.height); + + return 0; + +} /* end function rpng2_x_load_bg_image() */ + + + + + +static void rpng2_x_display_row(ulg row) +{ + uch bg_red = rpng2_info.bg_red; + uch bg_green = rpng2_info.bg_green; + uch bg_blue = rpng2_info.bg_blue; + uch *src, *src2=NULL; + char *dest; + uch r, g, b, a; + int ximage_rowbytes = ximage->bytes_per_line; + ulg i, pixel; + static int rows=0, prevpass=(-1); + static ulg firstrow; + +/*--------------------------------------------------------------------------- + rows and firstrow simply track how many rows (and which ones) have not + yet been displayed; alternatively, we could call XPutImage() for every + row and not bother with the records-keeping. + ---------------------------------------------------------------------------*/ + + Trace((stderr, "beginning rpng2_x_display_row()\n")) + + if (rpng2_info.pass != prevpass) { + if (pause_after_pass && rpng2_info.pass > 0) { + XEvent e; + KeySym k; + + fprintf(stderr, + "%s: end of pass %d of 7; click in image window to continue\n", + PROGNAME, prevpass + 1); + do + XNextEvent(display, &e); + while (!QUIT(e,k)); + } + fprintf(stderr, "%s: pass %d of 7\r", PROGNAME, rpng2_info.pass + 1); + fflush(stderr); + prevpass = rpng2_info.pass; + } + + if (rows == 0) + firstrow = row; /* first row that is not yet displayed */ + + ++rows; /* count of rows received but not yet displayed */ + +/*--------------------------------------------------------------------------- + Aside from the use of the rpng2_info struct, the lack of an outer loop + (over rows) and moving the XPutImage() call outside the "if (depth)" + tests, this routine is identical to rpng_x_display_image() in the non- + progressive version of the program. + ---------------------------------------------------------------------------*/ + + if (depth == 24 || depth == 32) { + ulg red, green, blue; + int bpp = ximage->bits_per_pixel; + + src = rpng2_info.image_data + row*rpng2_info.rowbytes; + if (bg_image) + src2 = bg_data + row*bg_rowbytes; + dest = ximage->data + row*ximage_rowbytes; + if (rpng2_info.channels == 3) { + for (i = rpng2_info.width; i > 0; --i) { + red = *src++; + green = *src++; + blue = *src++; + pixel = (red << RShift) | + (green << GShift) | + (blue << BShift); + /* recall that we set ximage->byte_order = MSBFirst above */ + if (bpp == 32) { + *dest++ = (char)((pixel >> 24) & 0xff); + *dest++ = (char)((pixel >> 16) & 0xff); + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } else { + /* GRR BUG? this assumes bpp == 24 & bits are packed low */ + /* (probably need to use RShift, RMask, etc.) */ + *dest++ = (char)((pixel >> 16) & 0xff); + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } + } + } else /* if (rpng2_info.channels == 4) */ { + for (i = rpng2_info.width; i > 0; --i) { + r = *src++; + g = *src++; + b = *src++; + a = *src++; + if (bg_image) { + bg_red = *src2++; + bg_green = *src2++; + bg_blue = *src2++; + } + if (a == 255) { + red = r; + green = g; + blue = b; + } else if (a == 0) { + red = bg_red; + green = bg_green; + blue = bg_blue; + } else { + /* this macro (from png.h) composites the foreground + * and background values and puts the result into the + * first argument */ + alpha_composite(red, r, a, bg_red); + alpha_composite(green, g, a, bg_green); + alpha_composite(blue, b, a, bg_blue); + } + pixel = (red << RShift) | + (green << GShift) | + (blue << BShift); + /* recall that we set ximage->byte_order = MSBFirst above */ + if (bpp == 32) { + *dest++ = (char)((pixel >> 24) & 0xff); + *dest++ = (char)((pixel >> 16) & 0xff); + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } else { + /* GRR BUG? this assumes bpp == 24 & bits are packed low */ + /* (probably need to use RShift, RMask, etc.) */ + *dest++ = (char)((pixel >> 16) & 0xff); + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } + } + } + + } else if (depth == 16) { + ush red, green, blue; + + src = rpng2_info.row_pointers[row]; + if (bg_image) + src2 = bg_data + row*bg_rowbytes; + dest = ximage->data + row*ximage_rowbytes; + if (rpng2_info.channels == 3) { + for (i = rpng2_info.width; i > 0; --i) { + red = ((ush)(*src) << 8); + ++src; + green = ((ush)(*src) << 8); + ++src; + blue = ((ush)(*src) << 8); + ++src; + pixel = ((red >> RShift) & RMask) | + ((green >> GShift) & GMask) | + ((blue >> BShift) & BMask); + /* recall that we set ximage->byte_order = MSBFirst above */ + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } + } else /* if (rpng2_info.channels == 4) */ { + for (i = rpng2_info.width; i > 0; --i) { + r = *src++; + g = *src++; + b = *src++; + a = *src++; + if (bg_image) { + bg_red = *src2++; + bg_green = *src2++; + bg_blue = *src2++; + } + if (a == 255) { + red = ((ush)r << 8); + green = ((ush)g << 8); + blue = ((ush)b << 8); + } else if (a == 0) { + red = ((ush)bg_red << 8); + green = ((ush)bg_green << 8); + blue = ((ush)bg_blue << 8); + } else { + /* this macro (from png.h) composites the foreground + * and background values and puts the result back into + * the first argument (== fg byte here: safe) */ + alpha_composite(r, r, a, bg_red); + alpha_composite(g, g, a, bg_green); + alpha_composite(b, b, a, bg_blue); + red = ((ush)r << 8); + green = ((ush)g << 8); + blue = ((ush)b << 8); + } + pixel = ((red >> RShift) & RMask) | + ((green >> GShift) & GMask) | + ((blue >> BShift) & BMask); + /* recall that we set ximage->byte_order = MSBFirst above */ + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } + } + + } else /* depth == 8 */ { + + /* GRR: add 8-bit support */ + + } + + +/*--------------------------------------------------------------------------- + Display after every 16 rows or when on one of last two rows. (Region + may include previously displayed lines due to interlacing--i.e., not + contiguous. Also, second-to-last row is final one in interlaced images + with odd number of rows.) For demos, flush (and delay) after every 16th + row so "sparse" passes don't go twice as fast. + ---------------------------------------------------------------------------*/ + + if (demo_timing && (row - firstrow >= 16 || row >= rpng2_info.height-2)) { + XPutImage(display, window, gc, ximage, 0, (int)firstrow, 0, + (int)firstrow, rpng2_info.width, row - firstrow + 1); + XFlush(display); + rows = 0; + usleep(usleep_duration); + } else + if (!demo_timing && ((rows & 0xf) == 0 || row >= rpng2_info.height-2)) { + XPutImage(display, window, gc, ximage, 0, (int)firstrow, 0, + (int)firstrow, rpng2_info.width, row - firstrow + 1); + XFlush(display); + rows = 0; + } + +} + + + + + +static void rpng2_x_finish_display(void) +{ + Trace((stderr, "beginning rpng2_x_finish_display()\n")) + + /* last row has already been displayed by rpng2_x_display_row(), so we + * have nothing to do here except set a flag and let the user know that + * the image is done */ + + rpng2_info.state = kDone; + printf( + "Done. Press Q, Esc or mouse button 1 (within image window) to quit.\n"); + fflush(stdout); +} + + + + + +static void rpng2_x_redisplay_image(ulg startcol, ulg startrow, + ulg width, ulg height) +{ + uch bg_red = rpng2_info.bg_red; + uch bg_green = rpng2_info.bg_green; + uch bg_blue = rpng2_info.bg_blue; + uch *src, *src2=NULL; + char *dest; + uch r, g, b, a; + ulg i, row, lastrow = 0; + ulg pixel; + int ximage_rowbytes = ximage->bytes_per_line; + + + Trace((stderr, "beginning display loop (image_channels == %d)\n", + rpng2_info.channels)) + Trace((stderr, " (width = %ld, rowbytes = %d, ximage_rowbytes = %d)\n", + rpng2_info.width, rpng2_info.rowbytes, ximage_rowbytes)) + Trace((stderr, " (bpp = %d)\n", ximage->bits_per_pixel)) + Trace((stderr, " (byte_order = %s)\n", ximage->byte_order == MSBFirst? + "MSBFirst" : (ximage->byte_order == LSBFirst? "LSBFirst" : "unknown"))) + +/*--------------------------------------------------------------------------- + Aside from the use of the rpng2_info struct and of src2 (for background + image), this routine is identical to rpng_x_display_image() in the non- + progressive version of the program--for the simple reason that redisplay + of the image against a new background happens after the image is fully + decoded and therefore is, by definition, non-progressive. + ---------------------------------------------------------------------------*/ + + if (depth == 24 || depth == 32) { + ulg red, green, blue; + int bpp = ximage->bits_per_pixel; + + for (lastrow = row = startrow; row < startrow+height; ++row) { + src = rpng2_info.image_data + row*rpng2_info.rowbytes; + if (bg_image) + src2 = bg_data + row*bg_rowbytes; + dest = ximage->data + row*ximage_rowbytes; + if (rpng2_info.channels == 3) { + for (i = rpng2_info.width; i > 0; --i) { + red = *src++; + green = *src++; + blue = *src++; +#ifdef NO_24BIT_MASKS + pixel = (red << RShift) | + (green << GShift) | + (blue << BShift); + /* recall that we set ximage->byte_order = MSBFirst above */ + if (bpp == 32) { + *dest++ = (char)((pixel >> 24) & 0xff); + *dest++ = (char)((pixel >> 16) & 0xff); + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } else { + /* this assumes bpp == 24 & bits are packed low */ + /* (probably need to use RShift, RMask, etc.) */ + *dest++ = (char)((pixel >> 16) & 0xff); + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } +#else + red = (RShift < 0)? red << (-RShift) : red >> RShift; + green = (GShift < 0)? green << (-GShift) : green >> GShift; + blue = (BShift < 0)? blue << (-BShift) : blue >> BShift; + pixel = (red & RMask) | (green & GMask) | (blue & BMask); + /* recall that we set ximage->byte_order = MSBFirst above */ + if (bpp == 32) { + *dest++ = (char)((pixel >> 24) & 0xff); + *dest++ = (char)((pixel >> 16) & 0xff); + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } else { + /* GRR BUG */ + /* this assumes bpp == 24 & bits are packed low */ + /* (probably need to use RShift/RMask/etc. here, too) */ + *dest++ = (char)((pixel >> 16) & 0xff); + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } +#endif + } + + } else /* if (rpng2_info.channels == 4) */ { + for (i = rpng2_info.width; i > 0; --i) { + r = *src++; + g = *src++; + b = *src++; + a = *src++; + if (bg_image) { + bg_red = *src2++; + bg_green = *src2++; + bg_blue = *src2++; + } + if (a == 255) { + red = r; + green = g; + blue = b; + } else if (a == 0) { + red = bg_red; + green = bg_green; + blue = bg_blue; + } else { + /* this macro (from png.h) composites the foreground + * and background values and puts the result into the + * first argument */ + alpha_composite(red, r, a, bg_red); + alpha_composite(green, g, a, bg_green); + alpha_composite(blue, b, a, bg_blue); + } +#ifdef NO_24BIT_MASKS + pixel = (red << RShift) | + (green << GShift) | + (blue << BShift); + /* recall that we set ximage->byte_order = MSBFirst above */ + if (bpp == 32) { + *dest++ = (char)((pixel >> 24) & 0xff); + *dest++ = (char)((pixel >> 16) & 0xff); + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } else { + /* this assumes bpp == 24 & bits are packed low */ + /* (probably need to use RShift, RMask, etc.) */ + *dest++ = (char)((pixel >> 16) & 0xff); + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } +#else + red = (RShift < 0)? red << (-RShift) : red >> RShift; + green = (GShift < 0)? green << (-GShift) : green >> GShift; + blue = (BShift < 0)? blue << (-BShift) : blue >> BShift; + pixel = (red & RMask) | (green & GMask) | (blue & BMask); + /* recall that we set ximage->byte_order = MSBFirst above */ + if (bpp == 32) { + *dest++ = (char)((pixel >> 24) & 0xff); + *dest++ = (char)((pixel >> 16) & 0xff); + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } else { + /* GRR BUG */ + /* this assumes bpp == 24 & bits are packed low */ + /* (probably need to use RShift/RMask/etc. here, too) */ + *dest++ = (char)((pixel >> 16) & 0xff); + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } +#endif + } + } + /* display after every 16 lines */ + if (((row+1) & 0xf) == 0) { + XPutImage(display, window, gc, ximage, 0, (int)lastrow, 0, + (int)lastrow, rpng2_info.width, 16); + XFlush(display); + lastrow = row + 1; + } + } + + } else if (depth == 16) { + ush red, green, blue; + + for (lastrow = row = startrow; row < startrow+height; ++row) { + src = rpng2_info.row_pointers[row]; + if (bg_image) + src2 = bg_data + row*bg_rowbytes; + dest = ximage->data + row*ximage_rowbytes; + if (rpng2_info.channels == 3) { + for (i = rpng2_info.width; i > 0; --i) { + red = ((ush)(*src) << 8); + ++src; + green = ((ush)(*src) << 8); + ++src; + blue = ((ush)(*src) << 8); + ++src; + pixel = ((red >> RShift) & RMask) | + ((green >> GShift) & GMask) | + ((blue >> BShift) & BMask); + /* recall that we set ximage->byte_order = MSBFirst above */ + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } + } else /* if (rpng2_info.channels == 4) */ { + for (i = rpng2_info.width; i > 0; --i) { + r = *src++; + g = *src++; + b = *src++; + a = *src++; + if (bg_image) { + bg_red = *src2++; + bg_green = *src2++; + bg_blue = *src2++; + } + if (a == 255) { + red = ((ush)r << 8); + green = ((ush)g << 8); + blue = ((ush)b << 8); + } else if (a == 0) { + red = ((ush)bg_red << 8); + green = ((ush)bg_green << 8); + blue = ((ush)bg_blue << 8); + } else { + /* this macro (from png.h) composites the foreground + * and background values and puts the result back into + * the first argument (== fg byte here: safe) */ + alpha_composite(r, r, a, bg_red); + alpha_composite(g, g, a, bg_green); + alpha_composite(b, b, a, bg_blue); + red = ((ush)r << 8); + green = ((ush)g << 8); + blue = ((ush)b << 8); + } + pixel = ((red >> RShift) & RMask) | + ((green >> GShift) & GMask) | + ((blue >> BShift) & BMask); + /* recall that we set ximage->byte_order = MSBFirst above */ + *dest++ = (char)((pixel >> 8) & 0xff); + *dest++ = (char)( pixel & 0xff); + } + } + /* display after every 16 lines */ + if (((row+1) & 0xf) == 0) { + XPutImage(display, window, gc, ximage, 0, (int)lastrow, 0, + (int)lastrow, rpng2_info.width, 16); + XFlush(display); + lastrow = row + 1; + } + } + + } else /* depth == 8 */ { + + /* GRR: add 8-bit support */ + + } + + Trace((stderr, "calling final XPutImage()\n")) + if (lastrow < startrow+height) { + XPutImage(display, window, gc, ximage, 0, (int)lastrow, 0, + (int)lastrow, rpng2_info.width, rpng2_info.height-lastrow); + XFlush(display); + } + + (void)startcol; + (void)width; + +} /* end function rpng2_x_redisplay_image() */ + + + + + +#ifdef FEATURE_LOOP + +static void rpng2_x_reload_bg_image(void) +{ + char *dest; + uch r1, r2, g1, g2, b1, b2; + uch r1_inv, r2_inv, g1_inv, g2_inv, b1_inv, b2_inv; + int k, hmax, max; + int xidx, yidx, yidx_max; + int even_odd_vert, even_odd_horiz, even_odd; + int invert_gradient2 = (bg[pat].type & 0x08); + int invert_column; + ulg i, row; + + + bgscale = (pat == 0)? 8 : bgscale_default; + yidx_max = bgscale - 1; + +/*--------------------------------------------------------------------------- + Vertical gradients (ramps) in NxN squares, alternating direction and + colors (N == bgscale). + ---------------------------------------------------------------------------*/ + + if ((bg[pat].type & 0x07) == 0) { + uch r1_min = rgb[bg[pat].rgb1_min].r; + uch g1_min = rgb[bg[pat].rgb1_min].g; + uch b1_min = rgb[bg[pat].rgb1_min].b; + uch r2_min = rgb[bg[pat].rgb2_min].r; + uch g2_min = rgb[bg[pat].rgb2_min].g; + uch b2_min = rgb[bg[pat].rgb2_min].b; + int r1_diff = rgb[bg[pat].rgb1_max].r - r1_min; + int g1_diff = rgb[bg[pat].rgb1_max].g - g1_min; + int b1_diff = rgb[bg[pat].rgb1_max].b - b1_min; + int r2_diff = rgb[bg[pat].rgb2_max].r - r2_min; + int g2_diff = rgb[bg[pat].rgb2_max].g - g2_min; + int b2_diff = rgb[bg[pat].rgb2_max].b - b2_min; + + for (row = 0; row < rpng2_info.height; ++row) { + yidx = (int)(row % bgscale); + even_odd_vert = (int)((row / bgscale) & 1); + + r1 = r1_min + (r1_diff * yidx) / yidx_max; + g1 = g1_min + (g1_diff * yidx) / yidx_max; + b1 = b1_min + (b1_diff * yidx) / yidx_max; + r1_inv = r1_min + (r1_diff * (yidx_max-yidx)) / yidx_max; + g1_inv = g1_min + (g1_diff * (yidx_max-yidx)) / yidx_max; + b1_inv = b1_min + (b1_diff * (yidx_max-yidx)) / yidx_max; + + r2 = r2_min + (r2_diff * yidx) / yidx_max; + g2 = g2_min + (g2_diff * yidx) / yidx_max; + b2 = b2_min + (b2_diff * yidx) / yidx_max; + r2_inv = r2_min + (r2_diff * (yidx_max-yidx)) / yidx_max; + g2_inv = g2_min + (g2_diff * (yidx_max-yidx)) / yidx_max; + b2_inv = b2_min + (b2_diff * (yidx_max-yidx)) / yidx_max; + + dest = (char *)bg_data + row*bg_rowbytes; + for (i = 0; i < rpng2_info.width; ++i) { + even_odd_horiz = (int)((i / bgscale) & 1); + even_odd = even_odd_vert ^ even_odd_horiz; + invert_column = + (even_odd_horiz && (bg[pat].type & 0x10)); + if (even_odd == 0) { /* gradient #1 */ + if (invert_column) { + *dest++ = r1_inv; + *dest++ = g1_inv; + *dest++ = b1_inv; + } else { + *dest++ = r1; + *dest++ = g1; + *dest++ = b1; + } + } else { /* gradient #2 */ + if ((invert_column && invert_gradient2) || + (!invert_column && !invert_gradient2)) + { + *dest++ = r2; /* not inverted or */ + *dest++ = g2; /* doubly inverted */ + *dest++ = b2; + } else { + *dest++ = r2_inv; + *dest++ = g2_inv; /* singly inverted */ + *dest++ = b2_inv; + } + } + } + } + +/*--------------------------------------------------------------------------- + Soft gradient-diamonds with scale = bgscale. Code contributed by Adam + M. Costello. + ---------------------------------------------------------------------------*/ + + } else if ((bg[pat].type & 0x07) == 1) { + + hmax = (bgscale-1)/2; /* half the max weight of a color */ + max = 2*hmax; /* the max weight of a color */ + + r1 = rgb[bg[pat].rgb1_max].r; + g1 = rgb[bg[pat].rgb1_max].g; + b1 = rgb[bg[pat].rgb1_max].b; + r2 = rgb[bg[pat].rgb2_max].r; + g2 = rgb[bg[pat].rgb2_max].g; + b2 = rgb[bg[pat].rgb2_max].b; + + for (row = 0; row < rpng2_info.height; ++row) { + yidx = (int)(row % bgscale); + if (yidx > hmax) + yidx = bgscale-1 - yidx; + dest = (char *)bg_data + row*bg_rowbytes; + for (i = 0; i < rpng2_info.width; ++i) { + xidx = (int)(i % bgscale); + if (xidx > hmax) + xidx = bgscale-1 - xidx; + k = xidx + yidx; + *dest++ = (k*r1 + (max-k)*r2) / max; + *dest++ = (k*g1 + (max-k)*g2) / max; + *dest++ = (k*b1 + (max-k)*b2) / max; + } + } + +/*--------------------------------------------------------------------------- + Radial "starburst" with azimuthal sinusoids; [eventually number of sinu- + soids will equal bgscale?]. This one is slow but very cool. Code con- + tributed by Pieter S. van der Meulen (originally in Smalltalk). + ---------------------------------------------------------------------------*/ + + } else if ((bg[pat].type & 0x07) == 2) { + uch ch; + int ii, x, y, hw, hh, grayspot; + double freq, rotate, saturate, gray, intensity; + double angle=0.0, aoffset=0.0, maxDist, dist; + double red=0.0, green=0.0, blue=0.0, hue, s, v, f, p, q, t; + + hh = (int)(rpng2_info.height / 2); + hw = (int)(rpng2_info.width / 2); + + /* variables for radial waves: + * aoffset: number of degrees to rotate hue [CURRENTLY NOT USED] + * freq: number of color beams originating from the center + * grayspot: size of the graying center area (anti-alias) + * rotate: rotation of the beams as a function of radius + * saturate: saturation of beams' shape azimuthally + */ + angle = CLIP(angle, 0.0, 360.0); + grayspot = CLIP(bg[pat].bg_gray, 1, (hh + hw)); + freq = MAX((double)bg[pat].bg_freq, 0.0); + saturate = (double)bg[pat].bg_bsat * 0.1; + rotate = (double)bg[pat].bg_brot * 0.1; + gray = 0.0; + intensity = 0.0; + maxDist = (double)((hw*hw) + (hh*hh)); + + for (row = 0; row < rpng2_info.height; ++row) { + y = (int)(row - hh); + dest = (char *)bg_data + row*bg_rowbytes; + for (i = 0; i < rpng2_info.width; ++i) { + x = (int)(i - hw); + angle = (x == 0)? PI_2 : atan((double)y / (double)x); + gray = (double)MAX(ABS(y), ABS(x)) / grayspot; + gray = MIN(1.0, gray); + dist = (double)((x*x) + (y*y)) / maxDist; + intensity = cos((angle+(rotate*dist*PI)) * freq) * + gray * saturate; + intensity = (MAX(MIN(intensity,1.0),-1.0) + 1.0) * 0.5; + hue = (angle + PI) * INV_PI_360 + aoffset; + s = gray * ((double)(ABS(x)+ABS(y)) / (double)(hw + hh)); + s = MIN(MAX(s,0.0), 1.0); + v = MIN(MAX(intensity,0.0), 1.0); + + if (s == 0.0) { + ch = (uch)(v * 255.0); + *dest++ = ch; + *dest++ = ch; + *dest++ = ch; + } else { + if ((hue < 0.0) || (hue >= 360.0)) + hue -= (((int)(hue / 360.0)) * 360.0); + hue /= 60.0; + ii = (int)hue; + f = hue - (double)ii; + p = (1.0 - s) * v; + q = (1.0 - (s * f)) * v; + t = (1.0 - (s * (1.0 - f))) * v; + if (ii == 0) { red = v; green = t; blue = p; } + else if (ii == 1) { red = q; green = v; blue = p; } + else if (ii == 2) { red = p; green = v; blue = t; } + else if (ii == 3) { red = p; green = q; blue = v; } + else if (ii == 4) { red = t; green = p; blue = v; } + else if (ii == 5) { red = v; green = p; blue = q; } + *dest++ = (uch)(red * 255.0); + *dest++ = (uch)(green * 255.0); + *dest++ = (uch)(blue * 255.0); + } + } + } + } + +} /* end function rpng2_x_reload_bg_image() */ + + + + + +static int is_number(char *p) +{ + while (*p) { + if (!isdigit(*p)) + return FALSE; + ++p; + } + return TRUE; +} + +#endif /* FEATURE_LOOP */ + + + + + +static void rpng2_x_cleanup(void) +{ + if (bg_image && bg_data) { + free(bg_data); + bg_data = NULL; + } + + if (rpng2_info.image_data) { + free(rpng2_info.image_data); + rpng2_info.image_data = NULL; + } + + if (rpng2_info.row_pointers) { + free(rpng2_info.row_pointers); + rpng2_info.row_pointers = NULL; + } + + if (ximage) { + if (ximage->data) { + free(ximage->data); /* we allocated it, so we free it */ + ximage->data = (char *)NULL; /* instead of XDestroyImage() */ + } + XDestroyImage(ximage); + ximage = NULL; + } + + if (have_gc) + XFreeGC(display, gc); + + if (have_window) + XDestroyWindow(display, window); + + if (have_colormap) + XFreeColormap(display, colormap); + + if (have_nondefault_visual) + XFree(visual_list); +} + + + + + +static int rpng2_x_msb(ulg u32val) +{ + int i; + + for (i = 31; i >= 0; --i) { + if (u32val & 0x80000000L) + break; + u32val <<= 1; + } + return i; +} diff --git a/compat/libpng/contrib/gregbook/toucan.png b/compat/libpng/contrib/gregbook/toucan.png new file mode 100755 index 0000000..03960d4 Binary files /dev/null and b/compat/libpng/contrib/gregbook/toucan.png differ diff --git a/compat/libpng/contrib/gregbook/wpng.c b/compat/libpng/contrib/gregbook/wpng.c new file mode 100755 index 0000000..30372a3 --- /dev/null +++ b/compat/libpng/contrib/gregbook/wpng.c @@ -0,0 +1,853 @@ +/*--------------------------------------------------------------------------- + + wpng - simple PNG-writing program wpng.c + + This program converts certain NetPBM binary files (grayscale and RGB, + maxval = 255) to PNG. Non-interlaced PNGs are written progressively; + interlaced PNGs are read and written in one memory-intensive blast. + + Thanks to Jean-loup Gailly for providing the necessary trick to read + interactive text from the keyboard while stdin is redirected. Thanks + to Cosmin Truta for Cygwin fixes. + + NOTE: includes provisional support for PNM type "8" (portable alphamap) + images, presumed to be a 32-bit interleaved RGBA format; no pro- + vision for possible interleaved grayscale+alpha (16-bit) format. + THIS IS UNLIKELY TO BECOME AN OFFICIAL NETPBM ALPHA FORMAT! + + to do: + - delete output file if quit before calling any writepng routines + - process backspace with -text option under DOS/Win? (currently get ^H) + + --------------------------------------------------------------------------- + + Changelog: + - 1.01: initial public release + - 1.02: modified to allow abbreviated options + - 1.03: removed extraneous character from usage screen; fixed bug in + command-line parsing + - 1.04: fixed DOS/OS2/Win32 detection, including partial Cygwin fix + (see http://home.att.net/~perlspinr/diffs/GregBook_cygwin.diff) + - 2.00: dual-licensed (added GNU GPL) + + [REPORTED BUG (win32 only): "contrib/gregbook/wpng.c - cmd line + dose not work! In order to do something useful I needed to redirect + both input and output, with cygwin and with bcc32 as well. Under + Linux, the same wpng appears to work fine. I don't know what is + the problem."] + + --------------------------------------------------------------------------- + + Copyright (c) 1998-2007 Greg Roelofs. All rights reserved. + + This software is provided "as is," without warranty of any kind, + express or implied. In no event shall the author or contributors + be held liable for any damages arising in any way from the use of + this software. + + The contents of this file are DUAL-LICENSED. You may modify and/or + redistribute this software according to the terms of one of the + following two licenses (at your option): + + + LICENSE 1 ("BSD-like with advertising clause"): + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute + it freely, subject to the following restrictions: + + 1. Redistributions of source code must retain the above copyright + notice, disclaimer, and this list of conditions. + 2. Redistributions in binary form must reproduce the above copyright + notice, disclaimer, and this list of conditions in the documenta- + tion and/or other materials provided with the distribution. + 3. All advertising materials mentioning features or use of this + software must display the following acknowledgment: + + This product includes software developed by Greg Roelofs + and contributors for the book, "PNG: The Definitive Guide," + published by O'Reilly and Associates. + + + LICENSE 2 (GNU GPL v2 or later): + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software Foundation, + Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + ---------------------------------------------------------------------------*/ + +#define PROGNAME "wpng" +#define VERSION "2.00 of 2 June 2007" +#define APPNAME "Simple PGM/PPM/PAM to PNG Converter" + +#if defined(__MSDOS__) || defined(__OS2__) +# define DOS_OS2_W32 +#elif defined(WIN32) || defined(_WIN32) || defined(__WIN32__) +# ifndef __GNUC__ /* treat Win32 native ports of gcc as Unix environments */ +# define DOS_OS2_W32 +# endif +#endif + +#include +#include +#include +#include /* for jmpbuf declaration in writepng.h */ +#include + +#ifdef DOS_OS2_W32 +# include /* for isatty(), setmode() prototypes */ +# include /* O_BINARY for fdopen() without text translation */ +# ifdef __EMX__ +# ifndef getch +# define getch() _read_kbd(0, 1, 0) /* need getche() */ +# endif +# else /* !__EMX__ */ +# ifdef __GO32__ +# include +# define getch() getkey() /* GRR: need getche() */ +# else +# include /* for getche() console input */ +# endif +# endif /* ?__EMX__ */ +# define FGETS(buf,len,stream) dos_kbd_gets(buf,len) +#else +# include /* for isatty() prototype */ +# define FGETS fgets +#endif + +/* #define DEBUG : this enables the Trace() macros */ + +/* #define FORBID_LATIN1_CTRL : this requires the user to re-enter any + text that includes control characters discouraged by the PNG spec; text + that includes an escape character (27) must be re-entered regardless */ + +#include "writepng.h" /* typedefs, common macros, writepng prototypes */ + + + +/* local prototypes */ + +static int wpng_isvalid_latin1(uch *p, int len); +static void wpng_cleanup(void); + +#ifdef DOS_OS2_W32 + static char *dos_kbd_gets(char *buf, int len); +#endif + + + +static mainprog_info wpng_info; /* lone global */ + + + +int main(int argc, char **argv) +{ +#ifndef DOS_OS2_W32 + FILE *keybd; +#endif +#ifdef sgi + FILE *tmpfile; /* or we could just use keybd, since no overlap */ + char tmpline[80]; +#endif + char *inname = NULL, outname[256]; + char *p, pnmchar, pnmline[256]; + char *bgstr, *textbuf = NULL; + ulg rowbytes; + int rc, len = 0; + int error = 0; + int text = FALSE; + int maxval; + double LUT_exponent; /* just the lookup table */ + double CRT_exponent = 2.2; /* just the monitor */ + double default_display_exponent; /* whole display system */ + double default_gamma = 0.0; + + + wpng_info.infile = NULL; + wpng_info.outfile = NULL; + wpng_info.image_data = NULL; + wpng_info.row_pointers = NULL; + wpng_info.filter = FALSE; + wpng_info.interlaced = FALSE; + wpng_info.have_bg = FALSE; + wpng_info.have_time = FALSE; + wpng_info.have_text = 0; + wpng_info.gamma = 0.0; + + + /* First get the default value for our display-system exponent, i.e., + * the product of the CRT exponent and the exponent corresponding to + * the frame-buffer's lookup table (LUT), if any. If the PNM image + * looks correct on the user's display system, its file gamma is the + * inverse of this value. (Note that this is not an exhaustive list + * of LUT values--e.g., OpenStep has a lot of weird ones--but it should + * cover 99% of the current possibilities. This section must ensure + * that default_display_exponent is positive.) */ + +#if defined(NeXT) + /* third-party utilities can modify the default LUT exponent */ + LUT_exponent = 1.0 / 2.2; + /* + if (some_next_function_that_returns_gamma(&next_gamma)) + LUT_exponent = 1.0 / next_gamma; + */ +#elif defined(sgi) + LUT_exponent = 1.0 / 1.7; + /* there doesn't seem to be any documented function to + * get the "gamma" value, so we do it the hard way */ + tmpfile = fopen("/etc/config/system.glGammaVal", "r"); + if (tmpfile) { + double sgi_gamma; + + fgets(tmpline, 80, tmpfile); + fclose(tmpfile); + sgi_gamma = atof(tmpline); + if (sgi_gamma > 0.0) + LUT_exponent = 1.0 / sgi_gamma; + } +#elif defined(Macintosh) + LUT_exponent = 1.8 / 2.61; + /* + if (some_mac_function_that_returns_gamma(&mac_gamma)) + LUT_exponent = mac_gamma / 2.61; + */ +#else + LUT_exponent = 1.0; /* assume no LUT: most PCs */ +#endif + + /* the defaults above give 1.0, 1.3, 1.5 and 2.2, respectively: */ + default_display_exponent = LUT_exponent * CRT_exponent; + + + /* If the user has set the SCREEN_GAMMA environment variable as suggested + * (somewhat imprecisely) in the libpng documentation, use that; otherwise + * use the default value we just calculated. Either way, the user may + * override this via a command-line option. */ + + if ((p = getenv("SCREEN_GAMMA")) != NULL) { + double exponent = atof(p); + + if (exponent > 0.0) + default_gamma = 1.0 / exponent; + } + + if (default_gamma == 0.0) + default_gamma = 1.0 / default_display_exponent; + + + /* Now parse the command line for options and the PNM filename. */ + + while (*++argv && !error) { + if (!strncmp(*argv, "-i", 2)) { + wpng_info.interlaced = TRUE; + } else if (!strncmp(*argv, "-time", 3)) { + wpng_info.modtime = time(NULL); + wpng_info.have_time = TRUE; + } else if (!strncmp(*argv, "-text", 3)) { + text = TRUE; + } else if (!strncmp(*argv, "-gamma", 2)) { + if (!*++argv) + ++error; + else { + wpng_info.gamma = atof(*argv); + if (wpng_info.gamma <= 0.0) + ++error; + else if (wpng_info.gamma > 1.01) + fprintf(stderr, PROGNAME + " warning: file gammas are usually less than 1.0\n"); + } + } else if (!strncmp(*argv, "-bgcolor", 4)) { + if (!*++argv) + ++error; + else { + bgstr = *argv; + if (strlen(bgstr) != 7 || bgstr[0] != '#') + ++error; + else { + unsigned r, g, b; /* this way quiets compiler warnings */ + + sscanf(bgstr+1, "%2x%2x%2x", &r, &g, &b); + wpng_info.bg_red = (uch)r; + wpng_info.bg_green = (uch)g; + wpng_info.bg_blue = (uch)b; + wpng_info.have_bg = TRUE; + } + } + } else { + if (**argv != '-') { + inname = *argv; + if (argv[1]) /* shouldn't be any more args after filename */ + ++error; + } else + ++error; /* not expecting any other options */ + } + } + + + /* open the input and output files, or register an error and abort */ + + if (!inname) { + if (isatty(0)) { + fprintf(stderr, PROGNAME + ": must give input filename or provide image data via stdin\n"); + ++error; + } else { +#ifdef DOS_OS2_W32 + /* some buggy C libraries require BOTH setmode() and fdopen(bin) */ + setmode(fileno(stdin), O_BINARY); + setmode(fileno(stdout), O_BINARY); +#endif + if ((wpng_info.infile = fdopen(fileno(stdin), "rb")) == NULL) { + fprintf(stderr, PROGNAME + ": unable to reopen stdin in binary mode\n"); + ++error; + } else + if ((wpng_info.outfile = fdopen(fileno(stdout), "wb")) == NULL) { + fprintf(stderr, PROGNAME + ": unable to reopen stdout in binary mode\n"); + fclose(wpng_info.infile); + ++error; + } else + wpng_info.filter = TRUE; + } + } else if ((len = strlen(inname)) > 250) { + fprintf(stderr, PROGNAME ": input filename is too long [%d chars]\n", + len); + ++error; + } else if (!(wpng_info.infile = fopen(inname, "rb"))) { + fprintf(stderr, PROGNAME ": can't open input file [%s]\n", inname); + ++error; + } + + if (!error) { + fgets(pnmline, 256, wpng_info.infile); + if (pnmline[0] != 'P' || ((pnmchar = pnmline[1]) != '5' && + pnmchar != '6' && pnmchar != '8')) + { + fprintf(stderr, PROGNAME + ": input file [%s] is not a binary PGM, PPM or PAM file\n", + inname); + ++error; + } else { + wpng_info.pnmtype = (int)(pnmchar - '0'); + if (wpng_info.pnmtype != 8) + wpng_info.have_bg = FALSE; /* no need for bg if opaque */ + do { + fgets(pnmline, 256, wpng_info.infile); /* lose any comments */ + } while (pnmline[0] == '#'); + sscanf(pnmline, "%ld %ld", &wpng_info.width, &wpng_info.height); + do { + fgets(pnmline, 256, wpng_info.infile); /* more comment lines */ + } while (pnmline[0] == '#'); + sscanf(pnmline, "%d", &maxval); + if (wpng_info.width <= 0L || wpng_info.height <= 0L || + maxval != 255) + { + fprintf(stderr, PROGNAME + ": only positive width/height, maxval == 255 allowed \n"); + ++error; + } + wpng_info.sample_depth = 8; /* <==> maxval 255 */ + + if (!wpng_info.filter) { + /* make outname from inname */ + if ((p = strrchr(inname, '.')) == NULL || + (p - inname) != (len - 4)) + { + strcpy(outname, inname); + strcpy(outname+len, ".png"); + } else { + len -= 4; + strncpy(outname, inname, len); + strcpy(outname+len, ".png"); + } + /* check if outname already exists; if not, open */ + if ((wpng_info.outfile = fopen(outname, "rb")) != NULL) { + fprintf(stderr, PROGNAME ": output file exists [%s]\n", + outname); + fclose(wpng_info.outfile); + ++error; + } else if (!(wpng_info.outfile = fopen(outname, "wb"))) { + fprintf(stderr, PROGNAME ": can't open output file [%s]\n", + outname); + ++error; + } + } + } + if (error) { + fclose(wpng_info.infile); + wpng_info.infile = NULL; + if (wpng_info.filter) { + fclose(wpng_info.outfile); + wpng_info.outfile = NULL; + } + } + } + + + /* if we had any errors, print usage and die horrible death...arrr! */ + + if (error) { + fprintf(stderr, "\n%s %s: %s\n", PROGNAME, VERSION, APPNAME); + writepng_version_info(); + fprintf(stderr, "\n" +"Usage: %s [-gamma exp] [-bgcolor bg] [-text] [-time] [-interlace] pnmfile\n" +"or: ... | %s [-gamma exp] [-bgcolor bg] [-text] [-time] [-interlace] | ...\n" + " exp \ttransfer-function exponent (``gamma'') of the image in\n" + "\t\t floating-point format (e.g., ``%.5f''); if image looks\n" + "\t\t correct on given display system, image gamma is equal to\n" + "\t\t inverse of display-system exponent, i.e., 1 / (LUT * CRT)\n" + "\t\t (where LUT = lookup-table exponent and CRT = CRT exponent;\n" + "\t\t first varies, second is usually 2.2, all are positive)\n" + " bg \tdesired background color for alpha-channel images, in\n" + "\t\t 7-character hex RGB format (e.g., ``#ff7700'' for orange:\n" + "\t\t same as HTML colors)\n" + " -text\tprompt interactively for text info (tEXt chunks)\n" + " -time\tinclude a tIME chunk (last modification time)\n" + " -interlace\twrite interlaced PNG image\n" + "\n" +"pnmfile or stdin must be a binary PGM (`P5'), PPM (`P6') or (extremely\n" +"unofficial and unsupported!) PAM (`P8') file. Currently it is required\n" +"to have maxval == 255 (i.e., no scaling). If pnmfile is specified, it\n" +"is converted to the corresponding PNG file with the same base name but a\n" +"``.png'' extension; files read from stdin are converted and sent to stdout.\n" +"The conversion is progressive (low memory usage) unless interlacing is\n" +"requested; in that case the whole image will be buffered in memory and\n" +"written in one call.\n" + "\n", PROGNAME, PROGNAME, default_gamma); + exit(1); + } + + + /* prepare the text buffers for libpng's use; note that even though + * PNG's png_text struct includes a length field, we don't have to fill + * it out */ + + if (text && +#ifndef DOS_OS2_W32 + (keybd = fdopen(fileno(stderr), "r")) != NULL && +#endif + (textbuf = (char *)malloc((5 + 9)*75)) != NULL) + { + int i, valid, result; + + fprintf(stderr, + "Enter text info (no more than 72 characters per line);\n"); + fprintf(stderr, "to skip a field, hit the key.\n"); + /* note: just leaves len == 1 */ + + do { + valid = TRUE; + p = textbuf + TEXT_TITLE_OFFSET; + fprintf(stderr, " Title: "); + fflush(stderr); + if (FGETS(p, 74, keybd) && (len = strlen(p)) > 1) { + if (p[len-1] == '\n') + p[--len] = '\0'; + wpng_info.title = p; + wpng_info.have_text |= TEXT_TITLE; + if ((result = wpng_isvalid_latin1((uch *)p, len)) >= 0) { + fprintf(stderr, " " PROGNAME " warning: character code" + " %u is %sdiscouraged by the PNG\n specification " + "[first occurrence was at character position #%d]\n", + (unsigned)p[result], (p[result] == 27)? "strongly " : "", + result+1); + fflush(stderr); +#ifdef FORBID_LATIN1_CTRL + wpng_info.have_text &= ~TEXT_TITLE; + valid = FALSE; +#else + if (p[result] == 27) { /* escape character */ + wpng_info.have_text &= ~TEXT_TITLE; + valid = FALSE; + } +#endif + } + } + } while (!valid); + + do { + valid = TRUE; + p = textbuf + TEXT_AUTHOR_OFFSET; + fprintf(stderr, " Author: "); + fflush(stderr); + if (FGETS(p, 74, keybd) && (len = strlen(p)) > 1) { + if (p[len-1] == '\n') + p[--len] = '\0'; + wpng_info.author = p; + wpng_info.have_text |= TEXT_AUTHOR; + if ((result = wpng_isvalid_latin1((uch *)p, len)) >= 0) { + fprintf(stderr, " " PROGNAME " warning: character code" + " %u is %sdiscouraged by the PNG\n specification " + "[first occurrence was at character position #%d]\n", + (unsigned)p[result], (p[result] == 27)? "strongly " : "", + result+1); + fflush(stderr); +#ifdef FORBID_LATIN1_CTRL + wpng_info.have_text &= ~TEXT_AUTHOR; + valid = FALSE; +#else + if (p[result] == 27) { /* escape character */ + wpng_info.have_text &= ~TEXT_AUTHOR; + valid = FALSE; + } +#endif + } + } + } while (!valid); + + do { + valid = TRUE; + p = textbuf + TEXT_DESC_OFFSET; + fprintf(stderr, " Description (up to 9 lines):\n"); + for (i = 1; i < 10; ++i) { + fprintf(stderr, " [%d] ", i); + fflush(stderr); + if (FGETS(p, 74, keybd) && (len = strlen(p)) > 1) + p += len; /* now points at NULL; char before is newline */ + else + break; + } + if ((len = p - (textbuf + TEXT_DESC_OFFSET)) > 1) { + if (p[-1] == '\n') { + p[-1] = '\0'; + --len; + } + wpng_info.desc = textbuf + TEXT_DESC_OFFSET; + wpng_info.have_text |= TEXT_DESC; + p = textbuf + TEXT_DESC_OFFSET; + if ((result = wpng_isvalid_latin1((uch *)p, len)) >= 0) { + fprintf(stderr, " " PROGNAME " warning: character code" + " %u is %sdiscouraged by the PNG\n specification " + "[first occurrence was at character position #%d]\n", + (unsigned)p[result], (p[result] == 27)? "strongly " : "", + result+1); + fflush(stderr); +#ifdef FORBID_LATIN1_CTRL + wpng_info.have_text &= ~TEXT_DESC; + valid = FALSE; +#else + if (p[result] == 27) { /* escape character */ + wpng_info.have_text &= ~TEXT_DESC; + valid = FALSE; + } +#endif + } + } + } while (!valid); + + do { + valid = TRUE; + p = textbuf + TEXT_COPY_OFFSET; + fprintf(stderr, " Copyright: "); + fflush(stderr); + if (FGETS(p, 74, keybd) && (len = strlen(p)) > 1) { + if (p[len-1] == '\n') + p[--len] = '\0'; + wpng_info.copyright = p; + wpng_info.have_text |= TEXT_COPY; + if ((result = wpng_isvalid_latin1((uch *)p, len)) >= 0) { + fprintf(stderr, " " PROGNAME " warning: character code" + " %u is %sdiscouraged by the PNG\n specification " + "[first occurrence was at character position #%d]\n", + (unsigned)p[result], (p[result] == 27)? "strongly " : "", + result+1); + fflush(stderr); +#ifdef FORBID_LATIN1_CTRL + wpng_info.have_text &= ~TEXT_COPY; + valid = FALSE; +#else + if (p[result] == 27) { /* escape character */ + wpng_info.have_text &= ~TEXT_COPY; + valid = FALSE; + } +#endif + } + } + } while (!valid); + + do { + valid = TRUE; + p = textbuf + TEXT_EMAIL_OFFSET; + fprintf(stderr, " E-mail: "); + fflush(stderr); + if (FGETS(p, 74, keybd) && (len = strlen(p)) > 1) { + if (p[len-1] == '\n') + p[--len] = '\0'; + wpng_info.email = p; + wpng_info.have_text |= TEXT_EMAIL; + if ((result = wpng_isvalid_latin1((uch *)p, len)) >= 0) { + fprintf(stderr, " " PROGNAME " warning: character code" + " %u is %sdiscouraged by the PNG\n specification " + "[first occurrence was at character position #%d]\n", + (unsigned)p[result], (p[result] == 27)? "strongly " : "", + result+1); + fflush(stderr); +#ifdef FORBID_LATIN1_CTRL + wpng_info.have_text &= ~TEXT_EMAIL; + valid = FALSE; +#else + if (p[result] == 27) { /* escape character */ + wpng_info.have_text &= ~TEXT_EMAIL; + valid = FALSE; + } +#endif + } + } + } while (!valid); + + do { + valid = TRUE; + p = textbuf + TEXT_URL_OFFSET; + fprintf(stderr, " URL: "); + fflush(stderr); + if (FGETS(p, 74, keybd) && (len = strlen(p)) > 1) { + if (p[len-1] == '\n') + p[--len] = '\0'; + wpng_info.url = p; + wpng_info.have_text |= TEXT_URL; + if ((result = wpng_isvalid_latin1((uch *)p, len)) >= 0) { + fprintf(stderr, " " PROGNAME " warning: character code" + " %u is %sdiscouraged by the PNG\n specification " + "[first occurrence was at character position #%d]\n", + (unsigned)p[result], (p[result] == 27)? "strongly " : "", + result+1); + fflush(stderr); +#ifdef FORBID_LATIN1_CTRL + wpng_info.have_text &= ~TEXT_URL; + valid = FALSE; +#else + if (p[result] == 27) { /* escape character */ + wpng_info.have_text &= ~TEXT_URL; + valid = FALSE; + } +#endif + } + } + } while (!valid); + +#ifndef DOS_OS2_W32 + fclose(keybd); +#endif + + } else if (text) { + fprintf(stderr, PROGNAME ": unable to allocate memory for text\n"); + text = FALSE; + wpng_info.have_text = 0; + } + + + /* allocate libpng stuff, initialize transformations, write pre-IDAT data */ + + if ((rc = writepng_init(&wpng_info)) != 0) { + switch (rc) { + case 2: + fprintf(stderr, PROGNAME + ": libpng initialization problem (longjmp)\n"); + break; + case 4: + fprintf(stderr, PROGNAME ": insufficient memory\n"); + break; + case 11: + fprintf(stderr, PROGNAME + ": internal logic error (unexpected PNM type)\n"); + break; + default: + fprintf(stderr, PROGNAME + ": unknown writepng_init() error\n"); + break; + } + exit(rc); + } + + + /* free textbuf, since it's a completely local variable and all text info + * has just been written to the PNG file */ + + if (text && textbuf) { + free(textbuf); + textbuf = NULL; + } + + + /* calculate rowbytes on basis of image type; note that this becomes much + * more complicated if we choose to support PBM type, ASCII PNM types, or + * 16-bit-per-sample binary data [currently not an official NetPBM type] */ + + if (wpng_info.pnmtype == 5) + rowbytes = wpng_info.width; + else if (wpng_info.pnmtype == 6) + rowbytes = wpng_info.width * 3; + else /* if (wpng_info.pnmtype == 8) */ + rowbytes = wpng_info.width * 4; + + + /* read and write the image, either in its entirety (if writing interlaced + * PNG) or row by row (if non-interlaced) */ + + fprintf(stderr, "Encoding image data...\n"); + fflush(stderr); + + if (wpng_info.interlaced) { + long i; + ulg bytes; + ulg image_bytes = rowbytes * wpng_info.height; /* overflow? */ + + wpng_info.image_data = (uch *)malloc(image_bytes); + wpng_info.row_pointers = (uch **)malloc(wpng_info.height*sizeof(uch *)); + if (wpng_info.image_data == NULL || wpng_info.row_pointers == NULL) { + fprintf(stderr, PROGNAME ": insufficient memory for image data\n"); + writepng_cleanup(&wpng_info); + wpng_cleanup(); + exit(5); + } + for (i = 0; i < wpng_info.height; ++i) + wpng_info.row_pointers[i] = wpng_info.image_data + i*rowbytes; + bytes = fread(wpng_info.image_data, 1, image_bytes, wpng_info.infile); + if (bytes != image_bytes) { + fprintf(stderr, PROGNAME ": expected %lu bytes, got %lu bytes\n", + image_bytes, bytes); + fprintf(stderr, " (continuing anyway)\n"); + } + if (writepng_encode_image(&wpng_info) != 0) { + fprintf(stderr, PROGNAME + ": libpng problem (longjmp) while writing image data\n"); + writepng_cleanup(&wpng_info); + wpng_cleanup(); + exit(2); + } + + } else /* not interlaced: write progressively (row by row) */ { + long j; + ulg bytes; + + wpng_info.image_data = (uch *)malloc(rowbytes); + if (wpng_info.image_data == NULL) { + fprintf(stderr, PROGNAME ": insufficient memory for row data\n"); + writepng_cleanup(&wpng_info); + wpng_cleanup(); + exit(5); + } + error = 0; + for (j = wpng_info.height; j > 0L; --j) { + bytes = fread(wpng_info.image_data, 1, rowbytes, wpng_info.infile); + if (bytes != rowbytes) { + fprintf(stderr, PROGNAME + ": expected %lu bytes, got %lu bytes (row %ld)\n", rowbytes, + bytes, wpng_info.height-j); + ++error; + break; + } + if (writepng_encode_row(&wpng_info) != 0) { + fprintf(stderr, PROGNAME + ": libpng problem (longjmp) while writing row %ld\n", + wpng_info.height-j); + ++error; + break; + } + } + if (error) { + writepng_cleanup(&wpng_info); + wpng_cleanup(); + exit(2); + } + if (writepng_encode_finish(&wpng_info) != 0) { + fprintf(stderr, PROGNAME ": error on final libpng call\n"); + writepng_cleanup(&wpng_info); + wpng_cleanup(); + exit(2); + } + } + + + /* OK, we're done (successfully): clean up all resources and quit */ + + fprintf(stderr, "Done.\n"); + fflush(stderr); + + writepng_cleanup(&wpng_info); + wpng_cleanup(); + + return 0; +} + + + + + +static int wpng_isvalid_latin1(uch *p, int len) +{ + int i, result = -1; + + for (i = 0; i < len; ++i) { + if (p[i] == 10 || (p[i] > 31 && p[i] < 127) || p[i] > 160) + continue; /* character is completely OK */ + if (result < 0 || (p[result] != 27 && p[i] == 27)) + result = i; /* mark location of first questionable one */ + } /* or of first escape character (bad) */ + + return result; +} + + + + + +static void wpng_cleanup(void) +{ + if (wpng_info.outfile) { + fclose(wpng_info.outfile); + wpng_info.outfile = NULL; + } + + if (wpng_info.infile) { + fclose(wpng_info.infile); + wpng_info.infile = NULL; + } + + if (wpng_info.image_data) { + free(wpng_info.image_data); + wpng_info.image_data = NULL; + } + + if (wpng_info.row_pointers) { + free(wpng_info.row_pointers); + wpng_info.row_pointers = NULL; + } +} + + + + +#ifdef DOS_OS2_W32 + +static char *dos_kbd_gets(char *buf, int len) +{ + int ch, count=0; + + do { + buf[count++] = ch = getche(); + } while (ch != '\r' && count < len-1); + + buf[count--] = '\0'; /* terminate string */ + if (buf[count] == '\r') /* Enter key makes CR, so change to newline */ + buf[count] = '\n'; + + fprintf(stderr, "\n"); /* Enter key does *not* cause a newline */ + fflush(stderr); + + return buf; +} + +#endif /* DOS_OS2_W32 */ diff --git a/compat/libpng/contrib/gregbook/writepng.c b/compat/libpng/contrib/gregbook/writepng.c new file mode 100755 index 0000000..f546bd3 --- /dev/null +++ b/compat/libpng/contrib/gregbook/writepng.c @@ -0,0 +1,401 @@ +/*--------------------------------------------------------------------------- + + wpng - simple PNG-writing program writepng.c + + --------------------------------------------------------------------------- + + Copyright (c) 1998-2007 Greg Roelofs. All rights reserved. + + This software is provided "as is," without warranty of any kind, + express or implied. In no event shall the author or contributors + be held liable for any damages arising in any way from the use of + this software. + + The contents of this file are DUAL-LICENSED. You may modify and/or + redistribute this software according to the terms of one of the + following two licenses (at your option): + + + LICENSE 1 ("BSD-like with advertising clause"): + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute + it freely, subject to the following restrictions: + + 1. Redistributions of source code must retain the above copyright + notice, disclaimer, and this list of conditions. + 2. Redistributions in binary form must reproduce the above copyright + notice, disclaimer, and this list of conditions in the documenta- + tion and/or other materials provided with the distribution. + 3. All advertising materials mentioning features or use of this + software must display the following acknowledgment: + + This product includes software developed by Greg Roelofs + and contributors for the book, "PNG: The Definitive Guide," + published by O'Reilly and Associates. + + + LICENSE 2 (GNU GPL v2 or later): + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software Foundation, + Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + ---------------------------------------------------------------------------*/ + + +#include /* for exit() prototype */ +#include + +#include "png.h" /* libpng header, includes setjmp.h */ +#include "writepng.h" /* typedefs, common macros, public prototypes */ + + +/* local prototype */ + +static void writepng_error_handler(png_structp png_ptr, png_const_charp msg); + + + +void writepng_version_info(void) +{ + fprintf(stderr, " Compiled with libpng %s; using libpng %s.\n", + PNG_LIBPNG_VER_STRING, png_libpng_ver); + fprintf(stderr, " Compiled with zlib %s; using zlib %s.\n", + ZLIB_VERSION, zlib_version); +} + + + + +/* returns 0 for success, 2 for libpng problem, 4 for out of memory, 11 for + * unexpected pnmtype; note that outfile might be stdout */ + +int writepng_init(mainprog_info *mainprog_ptr) +{ + png_structp png_ptr; /* note: temporary variables! */ + png_infop info_ptr; + int color_type, interlace_type; + + + /* could also replace libpng warning-handler (final NULL), but no need: */ + + png_ptr = png_create_write_struct(png_get_libpng_ver(NULL), mainprog_ptr, + writepng_error_handler, NULL); + if (!png_ptr) + return 4; /* out of memory */ + + info_ptr = png_create_info_struct(png_ptr); + if (!info_ptr) { + png_destroy_write_struct(&png_ptr, NULL); + return 4; /* out of memory */ + } + + + /* setjmp() must be called in every function that calls a PNG-writing + * libpng function, unless an alternate error handler was installed-- + * but compatible error handlers must either use longjmp() themselves + * (as in this program) or some other method to return control to + * application code, so here we go: */ + + if (setjmp(mainprog_ptr->jmpbuf)) { + png_destroy_write_struct(&png_ptr, &info_ptr); + return 2; + } + + + /* make sure outfile is (re)opened in BINARY mode */ + + png_init_io(png_ptr, mainprog_ptr->outfile); + + + /* set the compression levels--in general, always want to leave filtering + * turned on (except for palette images) and allow all of the filters, + * which is the default; want 32K zlib window, unless entire image buffer + * is 16K or smaller (unknown here)--also the default; usually want max + * compression (NOT the default); and remaining compression flags should + * be left alone */ + + png_set_compression_level(png_ptr, Z_BEST_COMPRESSION); +/* + >> this is default for no filtering; Z_FILTERED is default otherwise: + png_set_compression_strategy(png_ptr, Z_DEFAULT_STRATEGY); + >> these are all defaults: + png_set_compression_mem_level(png_ptr, 8); + png_set_compression_window_bits(png_ptr, 15); + png_set_compression_method(png_ptr, 8); + */ + + + /* set the image parameters appropriately */ + + if (mainprog_ptr->pnmtype == 5) + color_type = PNG_COLOR_TYPE_GRAY; + else if (mainprog_ptr->pnmtype == 6) + color_type = PNG_COLOR_TYPE_RGB; + else if (mainprog_ptr->pnmtype == 8) + color_type = PNG_COLOR_TYPE_RGB_ALPHA; + else { + png_destroy_write_struct(&png_ptr, &info_ptr); + return 11; + } + + interlace_type = mainprog_ptr->interlaced? PNG_INTERLACE_ADAM7 : + PNG_INTERLACE_NONE; + + png_set_IHDR(png_ptr, info_ptr, mainprog_ptr->width, mainprog_ptr->height, + mainprog_ptr->sample_depth, color_type, interlace_type, + PNG_COMPRESSION_TYPE_DEFAULT, PNG_FILTER_TYPE_DEFAULT); + + if (mainprog_ptr->gamma > 0.0) + png_set_gAMA(png_ptr, info_ptr, mainprog_ptr->gamma); + + if (mainprog_ptr->have_bg) { /* we know it's RGBA, not gray+alpha */ + png_color_16 background; + + background.red = mainprog_ptr->bg_red; + background.green = mainprog_ptr->bg_green; + background.blue = mainprog_ptr->bg_blue; + png_set_bKGD(png_ptr, info_ptr, &background); + } + + if (mainprog_ptr->have_time) { + png_time modtime; + + png_convert_from_time_t(&modtime, mainprog_ptr->modtime); + png_set_tIME(png_ptr, info_ptr, &modtime); + } + + if (mainprog_ptr->have_text) { + png_text text[6]; + int num_text = 0; + + if (mainprog_ptr->have_text & TEXT_TITLE) { + text[num_text].compression = PNG_TEXT_COMPRESSION_NONE; + text[num_text].key = "Title"; + text[num_text].text = mainprog_ptr->title; + ++num_text; + } + if (mainprog_ptr->have_text & TEXT_AUTHOR) { + text[num_text].compression = PNG_TEXT_COMPRESSION_NONE; + text[num_text].key = "Author"; + text[num_text].text = mainprog_ptr->author; + ++num_text; + } + if (mainprog_ptr->have_text & TEXT_DESC) { + text[num_text].compression = PNG_TEXT_COMPRESSION_NONE; + text[num_text].key = "Description"; + text[num_text].text = mainprog_ptr->desc; + ++num_text; + } + if (mainprog_ptr->have_text & TEXT_COPY) { + text[num_text].compression = PNG_TEXT_COMPRESSION_NONE; + text[num_text].key = "Copyright"; + text[num_text].text = mainprog_ptr->copyright; + ++num_text; + } + if (mainprog_ptr->have_text & TEXT_EMAIL) { + text[num_text].compression = PNG_TEXT_COMPRESSION_NONE; + text[num_text].key = "E-mail"; + text[num_text].text = mainprog_ptr->email; + ++num_text; + } + if (mainprog_ptr->have_text & TEXT_URL) { + text[num_text].compression = PNG_TEXT_COMPRESSION_NONE; + text[num_text].key = "URL"; + text[num_text].text = mainprog_ptr->url; + ++num_text; + } + png_set_text(png_ptr, info_ptr, text, num_text); + } + + + /* write all chunks up to (but not including) first IDAT */ + + png_write_info(png_ptr, info_ptr); + + + /* if we wanted to write any more text info *after* the image data, we + * would set up text struct(s) here and call png_set_text() again, with + * just the new data; png_set_tIME() could also go here, but it would + * have no effect since we already called it above (only one tIME chunk + * allowed) */ + + + /* set up the transformations: for now, just pack low-bit-depth pixels + * into bytes (one, two or four pixels per byte) */ + + png_set_packing(png_ptr); +/* png_set_shift(png_ptr, &sig_bit); to scale low-bit-depth values */ + + + /* make sure we save our pointers for use in writepng_encode_image() */ + + mainprog_ptr->png_ptr = png_ptr; + mainprog_ptr->info_ptr = info_ptr; + + + /* OK, that's all we need to do for now; return happy */ + + return 0; +} + + + + + +/* returns 0 for success, 2 for libpng (longjmp) problem */ + +int writepng_encode_image(mainprog_info *mainprog_ptr) +{ + png_structp png_ptr = (png_structp)mainprog_ptr->png_ptr; + png_infop info_ptr = (png_infop)mainprog_ptr->info_ptr; + + + /* as always, setjmp() must be called in every function that calls a + * PNG-writing libpng function */ + + if (setjmp(mainprog_ptr->jmpbuf)) { + png_destroy_write_struct(&png_ptr, &info_ptr); + mainprog_ptr->png_ptr = NULL; + mainprog_ptr->info_ptr = NULL; + return 2; + } + + + /* and now we just write the whole image; libpng takes care of interlacing + * for us */ + + png_write_image(png_ptr, mainprog_ptr->row_pointers); + + + /* since that's it, we also close out the end of the PNG file now--if we + * had any text or time info to write after the IDATs, second argument + * would be info_ptr, but we optimize slightly by sending NULL pointer: */ + + png_write_end(png_ptr, NULL); + + return 0; +} + + + + + +/* returns 0 if succeeds, 2 if libpng problem */ + +int writepng_encode_row(mainprog_info *mainprog_ptr) /* NON-interlaced only! */ +{ + png_structp png_ptr = (png_structp)mainprog_ptr->png_ptr; + png_infop info_ptr = (png_infop)mainprog_ptr->info_ptr; + + + /* as always, setjmp() must be called in every function that calls a + * PNG-writing libpng function */ + + if (setjmp(mainprog_ptr->jmpbuf)) { + png_destroy_write_struct(&png_ptr, &info_ptr); + mainprog_ptr->png_ptr = NULL; + mainprog_ptr->info_ptr = NULL; + return 2; + } + + + /* image_data points at our one row of image data */ + + png_write_row(png_ptr, mainprog_ptr->image_data); + + return 0; +} + + + + + +/* returns 0 if succeeds, 2 if libpng problem */ + +int writepng_encode_finish(mainprog_info *mainprog_ptr) /* NON-interlaced! */ +{ + png_structp png_ptr = (png_structp)mainprog_ptr->png_ptr; + png_infop info_ptr = (png_infop)mainprog_ptr->info_ptr; + + + /* as always, setjmp() must be called in every function that calls a + * PNG-writing libpng function */ + + if (setjmp(mainprog_ptr->jmpbuf)) { + png_destroy_write_struct(&png_ptr, &info_ptr); + mainprog_ptr->png_ptr = NULL; + mainprog_ptr->info_ptr = NULL; + return 2; + } + + + /* close out PNG file; if we had any text or time info to write after + * the IDATs, second argument would be info_ptr: */ + + png_write_end(png_ptr, NULL); + + return 0; +} + + + + + +void writepng_cleanup(mainprog_info *mainprog_ptr) +{ + png_structp png_ptr = (png_structp)mainprog_ptr->png_ptr; + png_infop info_ptr = (png_infop)mainprog_ptr->info_ptr; + + if (png_ptr && info_ptr) + png_destroy_write_struct(&png_ptr, &info_ptr); +} + + + + + +static void writepng_error_handler(png_structp png_ptr, png_const_charp msg) +{ + mainprog_info *mainprog_ptr; + + /* This function, aside from the extra step of retrieving the "error + * pointer" (below) and the fact that it exists within the application + * rather than within libpng, is essentially identical to libpng's + * default error handler. The second point is critical: since both + * setjmp() and longjmp() are called from the same code, they are + * guaranteed to have compatible notions of how big a jmp_buf is, + * regardless of whether _BSD_SOURCE or anything else has (or has not) + * been defined. */ + + fprintf(stderr, "writepng libpng error: %s\n", msg); + fflush(stderr); + + mainprog_ptr = png_get_error_ptr(png_ptr); + if (mainprog_ptr == NULL) { /* we are completely hosed now */ + fprintf(stderr, + "writepng severe error: jmpbuf not recoverable; terminating.\n"); + fflush(stderr); + exit(99); + } + + /* Now we have our data structure we can use the information in it + * to return control to our own higher level code (all the points + * where 'setjmp' is called in this file.) This will work with other + * error handling mechanisms as well - libpng always calls png_error + * when it can proceed no further, thus, so long as the error handler + * is intercepted, application code can do its own error recovery. + */ + longjmp(mainprog_ptr->jmpbuf, 1); +} diff --git a/compat/libpng/contrib/gregbook/writepng.h b/compat/libpng/contrib/gregbook/writepng.h new file mode 100755 index 0000000..904e4fb --- /dev/null +++ b/compat/libpng/contrib/gregbook/writepng.h @@ -0,0 +1,133 @@ +/*--------------------------------------------------------------------------- + + wpng - simple PNG-writing program writepng.h + + --------------------------------------------------------------------------- + + Copyright (c) 1998-2007 Greg Roelofs. All rights reserved. + + This software is provided "as is," without warranty of any kind, + express or implied. In no event shall the author or contributors + be held liable for any damages arising in any way from the use of + this software. + + The contents of this file are DUAL-LICENSED. You may modify and/or + redistribute this software according to the terms of one of the + following two licenses (at your option): + + + LICENSE 1 ("BSD-like with advertising clause"): + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute + it freely, subject to the following restrictions: + + 1. Redistributions of source code must retain the above copyright + notice, disclaimer, and this list of conditions. + 2. Redistributions in binary form must reproduce the above copyright + notice, disclaimer, and this list of conditions in the documenta- + tion and/or other materials provided with the distribution. + 3. All advertising materials mentioning features or use of this + software must display the following acknowledgment: + + This product includes software developed by Greg Roelofs + and contributors for the book, "PNG: The Definitive Guide," + published by O'Reilly and Associates. + + + LICENSE 2 (GNU GPL v2 or later): + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software Foundation, + Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + ---------------------------------------------------------------------------*/ + +#ifndef TRUE +# define TRUE 1 +# define FALSE 0 +#endif + +#ifndef MAX +# define MAX(a,b) ((a) > (b)? (a) : (b)) +# define MIN(a,b) ((a) < (b)? (a) : (b)) +#endif + +#ifdef DEBUG +# define Trace(x) {fprintf x ; fflush(stderr); fflush(stdout);} +#else +# define Trace(x) ; +#endif + +#define TEXT_TITLE 0x01 +#define TEXT_AUTHOR 0x02 +#define TEXT_DESC 0x04 +#define TEXT_COPY 0x08 +#define TEXT_EMAIL 0x10 +#define TEXT_URL 0x20 + +#define TEXT_TITLE_OFFSET 0 +#define TEXT_AUTHOR_OFFSET 72 +#define TEXT_COPY_OFFSET (2*72) +#define TEXT_EMAIL_OFFSET (3*72) +#define TEXT_URL_OFFSET (4*72) +#define TEXT_DESC_OFFSET (5*72) + +typedef unsigned char uch; +typedef unsigned short ush; +typedef unsigned long ulg; + +typedef struct _mainprog_info { + double gamma; + long width; + long height; + time_t modtime; + FILE *infile; + FILE *outfile; + void *png_ptr; + void *info_ptr; + uch *image_data; + uch **row_pointers; + char *title; + char *author; + char *desc; + char *copyright; + char *email; + char *url; + int filter; /* command-line-filter flag, not PNG row filter! */ + int pnmtype; + int sample_depth; + int interlaced; + int have_bg; + int have_time; + int have_text; + jmp_buf jmpbuf; + uch bg_red; + uch bg_green; + uch bg_blue; +} mainprog_info; + + +/* prototypes for public functions in writepng.c */ + +void writepng_version_info(void); + +int writepng_init(mainprog_info *mainprog_ptr); + +int writepng_encode_image(mainprog_info *mainprog_ptr); + +int writepng_encode_row(mainprog_info *mainprog_ptr); + +int writepng_encode_finish(mainprog_info *mainprog_ptr); + +void writepng_cleanup(mainprog_info *mainprog_ptr); diff --git a/compat/libpng/contrib/libtests/fakepng.c b/compat/libpng/contrib/libtests/fakepng.c new file mode 100755 index 0000000..6512c14 --- /dev/null +++ b/compat/libpng/contrib/libtests/fakepng.c @@ -0,0 +1,65 @@ +/* Fake a PNG - just write it out directly. + * + * COPYRIGHT: Written by John Cunningham Bowler, 2014. + * To the extent possible under law, the author has waived all copyright and + * related or neighboring rights to this work. This work is published from: + * United States. + * + */ + +#include +#include /* for crc32 */ + +void +put_uLong(uLong val) +{ + putchar(val >> 24); + putchar(val >> 16); + putchar(val >> 8); + putchar(val >> 0); +} + +void +put_chunk(const unsigned char *chunk, uInt length) +{ + uLong crc; + + put_uLong(length-4); /* Exclude the tag */ + + fwrite(chunk, length, 1, stdout); + + crc = crc32(0, Z_NULL, 0); + put_uLong(crc32(crc, chunk, length)); +} + +const unsigned char signature[] = +{ + 137, 80, 78, 71, 13, 10, 26, 10 +}; + +const unsigned char IHDR[] = +{ + 73, 72, 68, 82, /* IHDR */ + 0, 0, 0, 1, /* width */ + 0, 0, 0, 1, /* height */ + 1, /* bit depth */ + 0, /* color type: greyscale */ + 0, /* compression method */ + 0, /* filter method */ + 0 /* interlace method: none */ +}; + +const unsigned char unknown[] = +{ + 'u', 'n', 'K', 'n' /* "unKn" - private safe to copy */ +}; + +int +main(void) +{ + fwrite(signature, sizeof signature, 1, stdout); + put_chunk(IHDR, sizeof IHDR); + + for (;;) + put_chunk(unknown, sizeof unknown); +} diff --git a/compat/libpng/contrib/libtests/gentests.sh b/compat/libpng/contrib/libtests/gentests.sh new file mode 100755 index 0000000..f0f8d23 --- /dev/null +++ b/compat/libpng/contrib/libtests/gentests.sh @@ -0,0 +1,102 @@ +#!/bin/sh +# +# Copyright (c) 2013 John Cunningham Bowler +# +# Last changed in libpng 1.6.0 [February 14, 2013] +# +# This code is released under the libpng license. +# For conditions of distribution and use, see the disclaimer +# and license in png.h +# +# Generate a set of PNG test images. The images are generated in a +# sub-directory called 'tests' by default, however a command line argument will +# change that name. The generation requires a built version of makepng in the +# current directory. +# +usage(){ + exec >&2 + echo "$0 []" + echo ' Generate a set of PNG test files in "directory" ("tests" by default)' + exit 1 +} + +mp="$PWD/makepng" +test -x "$mp" || { + exec >&2 + echo "$0: the 'makepng' program must exist" + echo " in the directory within which this program:" + echo " $mp" + echo " is executed" + usage +} + +# Just one argument: the directory +testdir="tests" +test $# -gt 1 && { + testdir="$1" + shift +} +test $# -eq 0 || usage + +# Take care not to clobber something +if test -e "$testdir" +then + test -d "$testdir" || usage +else + # mkdir -p isn't portable, so do the following + mkdir "$testdir" 2>/dev/null || mkdir -p "$testdir" || usage +fi + +# This fails in a very satisfactory way if it's not accessible +cd "$testdir" +:>"test$$.png" || { + exec >&2 + echo "$testdir: directory not writable" + usage +} +rm "test$$.png" || { + exec >&2 + echo "$testdir: you have create but not write privileges here." + echo " This is unexpected. You have a spurion; "'"'"test$$.png"'"'"." + echo " You need to remove this yourself. Try a different directory." + exit 1 +} + +# Now call makepng ($mp) to create every file we can think of with a +# reasonable name +doit(){ + for gamma in "" --sRGB --linear --1.8 + do + case "$gamma" in + "") + gname=;; + --sRGB) + gname="-srgb";; + --linear) + gname="-lin";; + --1.8) + gname="-18";; + *) + gname="-$gamma";; + esac + "$mp" $gamma "$1" "$2" "test-$1-$2$gname.png" + done +} +# +for ct in gray palette +do + for bd in 1 2 4 8 + do + doit "$ct" "$bd" + done +done +# +doit "gray" "16" +# +for ct in gray-alpha rgb rgb-alpha +do + for bd in 8 16 + do + doit "$ct" "$bd" + done +done diff --git a/compat/libpng/contrib/libtests/makepng.c b/compat/libpng/contrib/libtests/makepng.c new file mode 100755 index 0000000..9dff048 --- /dev/null +++ b/compat/libpng/contrib/libtests/makepng.c @@ -0,0 +1,1941 @@ +/* makepng.c */ +#define _ISOC99_SOURCE +/* Copyright: */ +#define COPYRIGHT "\251 2013,2015 John Cunningham Bowler" +/* + * Last changed in libpng 1.6.20 [November 24, 2015] + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + * Make a test PNG image. The arguments are as follows: + * + * makepng [--sRGB|--linear|--1.8] [--tRNS] [--nofilters] \ + * color-type bit-depth [file-name] + * + * The color-type may be numeric (and must match the numbers used by the PNG + * specification) or one of the format names listed below. The bit-depth is the + * component bit depth, or the pixel bit-depth for a color-mapped image. + * + * Without any options no color-space information is written, with the options + * an sRGB or the appropriate gAMA chunk is written. "1.8" refers to the + * display system used on older Apple computers to correct for high ambient + * light levels in the viewing environment; it applies a transform of + * approximately value^(1/1.45) to the color values and so a gAMA chunk of 65909 + * is written (1.45/2.2). + * + * The image data is generated internally. Unless --color is given the images + * used are as follows: + * + * 1 channel: a square image with a diamond, the least luminous colors are on + * the edge of the image, the most luminous in the center. + * + * 2 channels: the color channel increases in luminosity from top to bottom, the + * alpha channel increases in opacity from left to right. + * + * 3 channels: linear combinations of, from the top-left corner clockwise, + * black, green, white, red. + * + * 4 channels: linear combinations of, from the top-left corner clockwise, + * transparent, red, green, blue. + * + * For color-mapped images a four channel color-map is used and if --tRNS is + * given the PNG file has a tRNS chunk, as follows: + * + * 1-bit: entry 0 is transparent-red, entry 1 is opaque-white + * 2-bit: entry 0: transparent-green + * entry 1: 40%-red + * entry 2: 80%-blue + * entry 3: opaque-white + * 4-bit: the 16 combinations of the 2-bit case + * 8-bit: the 256 combinations of the 4-bit case + * + * The palette always has 2^bit-depth entries and the tRNS chunk one fewer. The + * image is the 1-channel diamond, but using palette index, not luminosity. + * + * For formats other than color-mapped ones if --tRNS is specified a tRNS chunk + * is generated with all channels equal to the low bits of 0x0101. + * + * Image size is determined by the final pixel depth in bits, i.e. channels x + * bit-depth, as follows: + * + * 8 bits or less: 64x64 + * 16 bits: 256x256 + * More than 16 bits: 1024x1024 + * + * Row filtering is the libpng default but may be turned off (the 'none' filter + * is used on every row) with the --nofilters option. + * + * The images are not interlaced. + * + * If file-name is given then the PNG is written to that file, else it is + * written to stdout. Notice that stdout is not supported on systems where, by + * default, it assumes text output; this program makes no attempt to change the + * text mode of stdout! + * + * makepng --color= ... + * + * If --color is given then the whole image has that color, color-mapped images + * will have exactly one palette entry and all image files with be 16x16 in + * size. The color value is 1 to 4 decimal numbers as appropriate for the color + * type. + * + * makepng --small ... + * + * If --small is given the images are no larger than required to include every + * possible pixel value for the format. + * + * For formats with pixels 8 bits or fewer in size the images consist of a + * single row with 2^pixel-depth pixels, one of every possible value. + * + * For formats with 16-bit pixels a 256x256 image is generated containing every + * possible pixel value. + * + * For larger pixel sizes a 256x256 image is generated where the first row + * consists of each pixel that has identical byte values throughout the pixel + * followed by rows where the byte values differ within the pixel. + * + * In all cases the pixel values are arranged in such a way that the SUB and UP + * filters give byte sequences for maximal zlib compression. By default (if + * --nofilters is not given) the SUB filter is used on the first row and the UP + * filter on all following rows. + * + * The --small option is meant to provide good test-case coverage, however the + * images are not easy to examine visually. Without the --small option the + * images contain identical color values; the pixel values are adjusted + * according to the gamma encoding with no gamma encoding being interpreted as + * sRGB. + * + * LICENSING + * ========= + * + * This code is copyright of the authors, see the COPYRIGHT define above. The + * code is licensed as above, using the libpng license. The code generates + * images which are solely the product of the code; the options choose which of + * the many possibilities to generate. The images that result (but not the code + * which generates them) are licensed as defined here: + * + * IMPORTANT: the COPYRIGHT #define must contain ISO-Latin-1 characters, the + * IMAGE_LICENSING #define must contain UTF-8 characters. The 'copyright' + * symbol 0xA9U (\251) in ISO-Latin-1 encoding and 0xC20xA9 (\302\251) in UTF-8. + */ +#define IMAGE_LICENSING "Dedicated to the public domain per Creative Commons "\ + "license \"CC0 1.0\"; https://creativecommons.org/publicdomain/zero/1.0/" + +#include /* for offsetof */ +#include +#include +#include +#include +#include +#include +#include +#include + +#if defined(HAVE_CONFIG_H) && !defined(PNG_NO_CONFIG_H) +# include +#endif + +/* Define the following to use this test against your installed libpng, rather + * than the one being built here: + */ +#ifdef PNG_FREESTANDING_TESTS +# include +#else +# include "../../png.h" +#endif + +#include + +/* Work round for GCC complaints about casting a (double) function result to + * an unsigned: + */ +static unsigned int +flooru(double d) +{ + d = floor(d); + return (unsigned int)d; +} + +static png_byte +floorb(double d) +{ + d = floor(d); + return (png_byte)d; +} + +/* This structure is used for inserting extra chunks (the --insert argument, not + * documented above.) + */ +typedef struct chunk_insert +{ + struct chunk_insert *next; + void (*insert)(png_structp, png_infop, int, png_charpp); + int nparams; + png_charp parameters[1]; +} chunk_insert; + +static unsigned int +channels_of_type(int color_type) +{ + if (color_type & PNG_COLOR_MASK_PALETTE) + return 1; + + else + { + int channels = 1; + + if (color_type & PNG_COLOR_MASK_COLOR) + channels = 3; + + if (color_type & PNG_COLOR_MASK_ALPHA) + return channels + 1; + + else + return channels; + } +} + +static unsigned int +pixel_depth_of_type(int color_type, int bit_depth) +{ + return channels_of_type(color_type) * bit_depth; +} + +static unsigned int +image_size_of_type(int color_type, int bit_depth, unsigned int *colors, + int small) +{ + if (*colors) + return 16; + + else + { + int pixel_depth = pixel_depth_of_type(color_type, bit_depth); + + if (small) + { + if (pixel_depth <= 8) /* there will be one row */ + return 1 << pixel_depth; + + else + return 256; + } + + else if (pixel_depth < 8) + return 64; + + else if (pixel_depth > 16) + return 1024; + + else + return 256; + } +} + +static void +set_color(png_colorp color, png_bytep trans, unsigned int red, + unsigned int green, unsigned int blue, unsigned int alpha, + png_const_bytep gamma_table) +{ + color->red = gamma_table[red]; + color->green = gamma_table[green]; + color->blue = gamma_table[blue]; + *trans = (png_byte)alpha; +} + +static int +generate_palette(png_colorp palette, png_bytep trans, int bit_depth, + png_const_bytep gamma_table, unsigned int *colors) +{ + /* + * 1-bit: entry 0 is transparent-red, entry 1 is opaque-white + * 2-bit: entry 0: transparent-green + * entry 1: 40%-red + * entry 2: 80%-blue + * entry 3: opaque-white + * 4-bit: the 16 combinations of the 2-bit case + * 8-bit: the 256 combinations of the 4-bit case + */ + switch (colors[0]) + { + default: + fprintf(stderr, "makepng: --colors=...: invalid count %u\n", + colors[0]); + exit(1); + + case 1: + set_color(palette+0, trans+0, colors[1], colors[1], colors[1], 255, + gamma_table); + return 1; + + case 2: + set_color(palette+0, trans+0, colors[1], colors[1], colors[1], + colors[2], gamma_table); + return 1; + + case 3: + set_color(palette+0, trans+0, colors[1], colors[2], colors[3], 255, + gamma_table); + return 1; + + case 4: + set_color(palette+0, trans+0, colors[1], colors[2], colors[3], + colors[4], gamma_table); + return 1; + + case 0: + if (bit_depth == 1) + { + set_color(palette+0, trans+0, 255, 0, 0, 0, gamma_table); + set_color(palette+1, trans+1, 255, 255, 255, 255, gamma_table); + return 2; + } + + else + { + unsigned int size = 1U << (bit_depth/2); /* 2, 4 or 16 */ + unsigned int x, y; + volatile unsigned int ip = 0; + + for (x=0; x> 3; + + if (offset < rowbytes && (bit_depth < 16 || offset+1 < rowbytes)) + { + row += offset; + + switch (bit_depth) + { + case 1: + case 2: + case 4: + /* Don't gamma correct - values get smashed */ + { + unsigned int shift = (8 - bit_depth) - (x & 0x7U); + + mask <<= shift; + value = (value << shift) & mask; + *row = (png_byte)((*row & ~mask) | value); + } + return; + + default: + fprintf(stderr, "makepng: bad bit depth (internal error)\n"); + exit(1); + + case 16: + value = flooru(65535*pow(value/65535.,conv)+.5); + *row++ = (png_byte)(value >> 8); + *row = (png_byte)value; + return; + + case 8: + *row = gamma_table[value]; + return; + } + } + + else + { + fprintf(stderr, "makepng: row buffer overflow (internal error)\n"); + exit(1); + } + } + + else + { + fprintf(stderr, "makepng: component overflow (internal error)\n"); + exit(1); + } +} + +static int /* filter mask for row */ +generate_row(png_bytep row, size_t rowbytes, unsigned int y, int color_type, + int bit_depth, png_const_bytep gamma_table, double conv, + unsigned int *colors, int small) +{ + int filters = 0; /* file *MASK*, 0 means the default, not NONE */ + png_uint_32 size_max = + image_size_of_type(color_type, bit_depth, colors, small)-1; + png_uint_32 depth_max = (1U << bit_depth)-1; /* up to 65536 */ + + if (colors[0] == 0) if (small) + { + unsigned int pixel_depth = pixel_depth_of_type(color_type, bit_depth); + + /* For pixel depths less than 16 generate a single row containing all the + * possible pixel values. For 16 generate all 65536 byte pair + * combinations in a 256x256 pixel array. + */ + switch (pixel_depth) + { + case 1: + assert(y == 0 && rowbytes == 1 && size_max == 1); + row[0] = 0x6CU; /* binary: 01101100, only top 2 bits used */ + filters = PNG_FILTER_NONE; + break; + + case 2: + assert(y == 0 && rowbytes == 1 && size_max == 3); + row[0] = 0x1BU; /* binary 00011011, all bits used */ + filters = PNG_FILTER_NONE; + break; + + case 4: + assert(y == 0 && rowbytes == 8 && size_max == 15); + row[0] = 0x01U; + row[1] = 0x23U; /* SUB gives 0x22U for all following bytes */ + row[2] = 0x45U; + row[3] = 0x67U; + row[4] = 0x89U; + row[5] = 0xABU; + row[6] = 0xCDU; + row[7] = 0xEFU; + filters = PNG_FILTER_SUB; + break; + + case 8: + /* The row will have all the pixel values in order starting with + * '1', the SUB filter will change every byte into '1' (including + * the last, which generates pixel value '0'). Since the SUB filter + * has value 1 this should result in maximum compression. + */ + assert(y == 0 && rowbytes == 256 && size_max == 255); + for (;;) + { + row[size_max] = 0xFFU & (size_max+1); + if (size_max == 0) + break; + --size_max; + } + filters = PNG_FILTER_SUB; + break; + + case 16: + /* Rows are generated such that each row has a constant difference + * between the first and second byte of each pixel and so that the + * difference increases by 1 at each row. The rows start with the + * first byte value of 0 and the value increases to 255 across the + * row. + * + * The difference starts at 1, so the first row is: + * + * 0 1 1 2 2 3 3 4 ... 254 255 255 0 + * + * This means that running the SUB filter on the first row produces: + * + * [SUB==1] 0 1 0 1 0 1... + * + * Then the difference is 2 on the next row, giving: + * + * 0 2 1 3 2 4 3 5 ... 254 0 255 1 + * + * When the UP filter is run on this libpng produces: + * + * [UP ==2] 0 1 0 1 0 1... + * + * And so on for all the remain rows to the final two * rows: + * + * row 254: 0 255 1 0 2 1 3 2 4 3 ... 254 253 255 254 + * row 255: 0 0 1 1 2 2 3 3 4 4 ... 254 254 255 255 + */ + assert(rowbytes == 512 && size_max == 255); + for (;;) + { + row[2*size_max ] = 0xFFU & size_max; + row[2*size_max+1] = 0xFFU & (size_max+y+1); + if (size_max == 0) + break; + --size_max; + } + /* The first row must include PNG_FILTER_UP so that libpng knows we + * need to keep it for the following row: + */ + filters = (y == 0 ? PNG_FILTER_SUB+PNG_FILTER_UP : PNG_FILTER_UP); + break; + + case 24: + case 32: + case 48: + case 64: + /* The rows are filled by an alogorithm similar to the above, in the + * first row pixel bytes are all equal, increasing from 0 by 1 for + * each pixel. In the second row the bytes within a pixel are + * incremented 1,3,5,7,... from the previous row byte. Using an odd + * number ensures all the possible byte values are used. + */ + assert(size_max == 255 && rowbytes == 256*(pixel_depth>>3)); + pixel_depth >>= 3; /* now in bytes */ + while (rowbytes > 0) + { + const size_t pixel_index = --rowbytes/pixel_depth; + + if (y == 0) + row[rowbytes] = 0xFFU & pixel_index; + + else + { + const size_t byte_offset = + rowbytes - pixel_index * pixel_depth; + + row[rowbytes] = + 0xFFU & (pixel_index + (byte_offset * 2*y) + 1); + } + } + filters = (y == 0 ? PNG_FILTER_SUB+PNG_FILTER_UP : PNG_FILTER_UP); + break; + + default: + assert(0/*NOT REACHED*/); + } + } + + else switch (channels_of_type(color_type)) + { + /* 1 channel: a square image with a diamond, the least luminous colors are on + * the edge of the image, the most luminous in the center. + */ + case 1: + { + png_uint_32 x; + png_uint_32 base = 2*size_max - abs(2*y-size_max); + + for (x=0; x<=size_max; ++x) + { + png_uint_32 luma = base - abs(2*x-size_max); + + /* 'luma' is now in the range 0..2*size_max, we need + * 0..depth_max + */ + luma = (luma*depth_max + size_max) / (2*size_max); + set_value(row, rowbytes, x, bit_depth, luma, gamma_table, conv); + } + } + break; + + /* 2 channels: the color channel increases in luminosity from top to bottom, + * the alpha channel increases in opacity from left to right. + */ + case 2: + { + png_uint_32 alpha = (depth_max * y * 2 + size_max) / (2 * size_max); + png_uint_32 x; + + for (x=0; x<=size_max; ++x) + { + set_value(row, rowbytes, 2*x, bit_depth, + (depth_max * x * 2 + size_max) / (2 * size_max), gamma_table, + conv); + set_value(row, rowbytes, 2*x+1, bit_depth, alpha, gamma_table, + conv); + } + } + break; + + /* 3 channels: linear combinations of, from the top-left corner clockwise, + * black, green, white, red. + */ + case 3: + { + /* x0: the black->red scale (the value of the red component) at the + * start of the row (blue and green are 0). + * x1: the green->white scale (the value of the red and blue + * components at the end of the row; green is depth_max). + */ + png_uint_32 Y = (depth_max * y * 2 + size_max) / (2 * size_max); + png_uint_32 x; + + /* Interpolate x/depth_max from start to end: + * + * start end difference + * red: Y Y 0 + * green: 0 depth_max depth_max + * blue: 0 Y Y + */ + for (x=0; x<=size_max; ++x) + { + set_value(row, rowbytes, 3*x+0, bit_depth, /* red */ Y, + gamma_table, conv); + set_value(row, rowbytes, 3*x+1, bit_depth, /* green */ + (depth_max * x * 2 + size_max) / (2 * size_max), + gamma_table, conv); + set_value(row, rowbytes, 3*x+2, bit_depth, /* blue */ + (Y * x * 2 + size_max) / (2 * size_max), + gamma_table, conv); + } + } + break; + + /* 4 channels: linear combinations of, from the top-left corner clockwise, + * transparent, red, green, blue. + */ + case 4: + { + /* x0: the transparent->blue scale (the value of the blue and alpha + * components) at the start of the row (red and green are 0). + * x1: the red->green scale (the value of the red and green + * components at the end of the row; blue is 0 and alpha is + * depth_max). + */ + png_uint_32 Y = (depth_max * y * 2 + size_max) / (2 * size_max); + png_uint_32 x; + + /* Interpolate x/depth_max from start to end: + * + * start end difference + * red: 0 depth_max-Y depth_max-Y + * green: 0 Y Y + * blue: Y 0 -Y + * alpha: Y depth_max depth_max-Y + */ + for (x=0; x<=size_max; ++x) + { + set_value(row, rowbytes, 4*x+0, bit_depth, /* red */ + ((depth_max-Y) * x * 2 + size_max) / (2 * size_max), + gamma_table, conv); + set_value(row, rowbytes, 4*x+1, bit_depth, /* green */ + (Y * x * 2 + size_max) / (2 * size_max), + gamma_table, conv); + set_value(row, rowbytes, 4*x+2, bit_depth, /* blue */ + Y - (Y * x * 2 + size_max) / (2 * size_max), + gamma_table, conv); + set_value(row, rowbytes, 4*x+3, bit_depth, /* alpha */ + Y + ((depth_max-Y) * x * 2 + size_max) / (2 * size_max), + gamma_table, conv); + } + } + break; + + default: + fprintf(stderr, "makepng: internal bad channel count\n"); + exit(2); + } + + else if (color_type & PNG_COLOR_MASK_PALETTE) + { + /* Palette with fixed color: the image rows are all 0 and the image width + * is 16. + */ + memset(row, 0, rowbytes); + } + + else if (colors[0] == channels_of_type(color_type)) + switch (channels_of_type(color_type)) + { + case 1: + { + const png_uint_32 luma = colors[1]; + png_uint_32 x; + + for (x=0; x<=size_max; ++x) + set_value(row, rowbytes, x, bit_depth, luma, gamma_table, + conv); + } + break; + + case 2: + { + const png_uint_32 luma = colors[1]; + const png_uint_32 alpha = colors[2]; + png_uint_32 x; + + for (x=0; x 0 && gamma < 1000) + gamma = PNG_FP_1; + + if (gamma > 0) + real_gamma = gamma; + + { + unsigned int i; + + if (real_gamma == 45455) for (i=0; i<256; ++i) + { + gamma_table[i] = (png_byte)i; + conv = 1.; + } + + else + { + /* Convert 'i' from sRGB (45455) to real_gamma, this makes + * the images look the same regardless of the gAMA chunk. + */ + conv = real_gamma; + conv /= 45455; + + gamma_table[0] = 0; + + for (i=1; i<255; ++i) + gamma_table[i] = floorb(pow(i/255.,conv) * 255 + .5); + + gamma_table[255] = 255; + } + } + + png_set_IHDR(png_ptr, info_ptr, size, ysize, bit_depth, color_type, + PNG_INTERLACE_NONE, PNG_COMPRESSION_TYPE_BASE, PNG_FILTER_TYPE_BASE); + + if (color_type & PNG_COLOR_MASK_PALETTE) + { + int npalette; + png_color palette[256]; + png_byte trans[256]; + + npalette = generate_palette(palette, trans, bit_depth, gamma_table, + colors); + png_set_PLTE(png_ptr, info_ptr, palette, npalette); + + if (tRNS) + png_set_tRNS(png_ptr, info_ptr, trans, npalette-1, + NULL/*transparent color*/); + + /* Reset gamma_table to prevent the image rows being changed */ + for (npalette=0; npalette<256; ++npalette) + gamma_table[npalette] = (png_byte)npalette; + } + + else if (tRNS) + { + png_color_16 col; + + col.red = col.green = col.blue = col.gray = + 0x0101U & ((1U< 0) /* Else don't set color space information */ + { + png_set_gAMA_fixed(png_ptr, info_ptr, real_gamma); + + /* Just use the sRGB values here. */ + png_set_cHRM_fixed(png_ptr, info_ptr, + /* color x y */ + /* white */ 31270, 32900, + /* red */ 64000, 33000, + /* green */ 30000, 60000, + /* blue */ 15000, 6000 + ); + } + + /* Insert extra information. */ + while (insert != NULL) + { + insert->insert(png_ptr, info_ptr, insert->nparams, insert->parameters); + insert = insert->next; + } + + /* Write the file header. */ + png_write_info(png_ptr, info_ptr); + + /* Restrict the filters */ + png_set_filter(png_ptr, PNG_FILTER_TYPE_BASE, filters); + + { +# ifdef PNG_WRITE_INTERLACING_SUPPORTED + int passes = png_set_interlace_handling(png_ptr); +# else /* !WRITE_INTERLACING */ + int passes = 1; +# endif /* !WRITE_INTERLACING */ + int pass; + png_size_t rowbytes = png_get_rowbytes(png_ptr, info_ptr); + + row = malloc(rowbytes); + + if (row == NULL) + png_error(png_ptr, "OOM allocating row buffer"); + + for (pass = 0; pass < passes; ++pass) + { + unsigned int y; + + for (y=0; y 0) + { + /* Round up to a multiple of 4 here to allow an iCCP profile + * to be padded to a 4x boundary. + */ + png_bytep data = malloc((total+3)&~3); + + if (data != NULL) + { + size_t new_size = 0; + + for (;;) + { + ch = getc(fp); + if (ch == EOF) break; + data[new_size++] = (png_byte)ch; + } + + if (ferror(fp) || new_size != total) + { + perror("temporary file"); + fprintf(stderr, "temporary file read error\n"); + free(data); + } + + else + { + (void)fclose(fp); + *result = data; + return total; + } + } + + else + fprintf(stderr, "%s: out of memory loading file\n", name); + } + + else + fprintf(stderr, "%s: empty file\n", name); + } + } + } + + else + { + perror(name); + fprintf(stderr, "%s: open failed\n", name); + } + + fclose(fp); + } + + else + fprintf(stderr, "makepng: %s: could not open temporary file\n", name); + + exit(1); + return 0; +} + +static png_size_t +load_fake(png_charp param, png_bytepp profile) +{ + char *endptr = NULL; + uint64_t size = strtoull(param, &endptr, 0/*base*/); + + /* The 'fake' format is *[string] */ + if (endptr != NULL && *endptr == '*') + { + size_t len = strlen(++endptr); + size_t result = (size_t)size; + + if (len == 0) len = 1; /* capture the terminating '\0' */ + + /* Now repeat that string to fill 'size' bytes. */ + if (result == size && (*profile = malloc(result)) != NULL) + { + png_bytep out = *profile; + + if (len == 1) + memset(out, *endptr, result); + + else + { + while (size >= len) + { + memcpy(out, endptr, len); + out += len; + size -= len; + } + memcpy(out, endptr, size); + } + + return result; + } + + else + { + fprintf(stderr, "%s: size exceeds system limits\n", param); + exit(1); + } + } + + return 0; +} + +static void +check_param_count(int nparams, int expect) +{ + if (nparams != expect) + { + fprintf(stderr, "bad parameter count (internal error)\n"); + exit(1); + } +} + +static void +insert_iCCP(png_structp png_ptr, png_infop info_ptr, int nparams, + png_charpp params) +{ + png_bytep profile = NULL; + png_uint_32 proflen = 0; + int result; + + check_param_count(nparams, 2); + + switch (params[1][0]) + { + case '<': + { + png_size_t filelen = load_file(params[1]+1, &profile); + if (filelen > 0xfffffffc) /* Maximum profile length */ + { + fprintf(stderr, "%s: file too long (%lu) for an ICC profile\n", + params[1]+1, (unsigned long)filelen); + exit(1); + } + + proflen = (png_uint_32)filelen; + } + break; + + case '0': case '1': case '2': case '3': case '4': + case '5': case '6': case '7': case '8': case '9': + { + png_size_t fake_len = load_fake(params[1], &profile); + + if (fake_len > 0) /* else a simple parameter */ + { + if (fake_len > 0xffffffff) /* Maximum profile length */ + { + fprintf(stderr, + "%s: fake data too long (%lu) for an ICC profile\n", + params[1], (unsigned long)fake_len); + exit(1); + } + proflen = (png_uint_32)(fake_len & ~3U); + /* Always fix up the profile length. */ + png_save_uint_32(profile, proflen); + break; + } + } + + default: + fprintf(stderr, "--insert iCCP \"%s\": unrecognized\n", params[1]); + fprintf(stderr, " use '<' to read a file: \" 3) + { + png_uint_32 prof_header = png_get_uint_32(profile); + + if (prof_header != proflen) + { + fprintf(stderr, "--insert iCCP %s: profile length field wrong:\n", + params[1]); + fprintf(stderr, " actual %lu, recorded value %lu (corrected)\n", + (unsigned long)proflen, (unsigned long)prof_header); + png_save_uint_32(profile, proflen); + } + } + + if (result && profile != NULL && proflen >=4) + png_set_iCCP(png_ptr, info_ptr, params[0], PNG_COMPRESSION_TYPE_BASE, + profile, proflen); + + if (profile) + free(profile); + + if (!result) + exit(1); +} + +static void +clear_text(png_text *text, png_charp keyword) +{ + text->compression = -1; /* none */ + text->key = keyword; + text->text = NULL; + text->text_length = 0; /* libpng calculates this */ + text->itxt_length = 0; /* libpng calculates this */ + text->lang = NULL; + text->lang_key = NULL; +} + +static void +set_text(png_structp png_ptr, png_infop info_ptr, png_textp text, + png_charp param) +{ + switch (param[0]) + { + case '<': + { + png_bytep file = NULL; + + text->text_length = load_file(param+1, &file); + text->text = (png_charp)file; + } + break; + + case '0': case '1': case '2': case '3': case '4': + case '5': case '6': case '7': case '8': case '9': + { + png_bytep data = NULL; + png_size_t fake_len = load_fake(param, &data); + + if (fake_len > 0) /* else a simple parameter */ + { + text->text_length = fake_len; + text->text = (png_charp)data; + break; + } + } + + default: + text->text = param; + break; + } + + png_set_text(png_ptr, info_ptr, text, 1); + + if (text->text != param) + free(text->text); +} + +static void +insert_tEXt(png_structp png_ptr, png_infop info_ptr, int nparams, + png_charpp params) +{ + png_text text; + + check_param_count(nparams, 2); + clear_text(&text, params[0]); + set_text(png_ptr, info_ptr, &text, params[1]); +} + +static void +insert_zTXt(png_structp png_ptr, png_infop info_ptr, int nparams, + png_charpp params) +{ + png_text text; + + check_param_count(nparams, 2); + clear_text(&text, params[0]); + text.compression = 0; /* deflate */ + set_text(png_ptr, info_ptr, &text, params[1]); +} + +static void +insert_iTXt(png_structp png_ptr, png_infop info_ptr, int nparams, + png_charpp params) +{ + png_text text; + + check_param_count(nparams, 4); + clear_text(&text, params[0]); + text.compression = 2; /* iTXt + deflate */ + text.lang = params[1];/* language tag */ + text.lang_key = params[2]; /* translated keyword */ + set_text(png_ptr, info_ptr, &text, params[3]); +} + +static void +insert_hIST(png_structp png_ptr, png_infop info_ptr, int nparams, + png_charpp params) +{ + int i; + png_uint_16 freq[256]; + + /* libpng takes the count from the PLTE count; we don't check it here but we + * do set the array to 0 for unspecified entries. + */ + memset(freq, 0, sizeof freq); + for (i=0; inext = NULL; + cip->insert = insert; + cip->nparams = nparams; + for (i=0; iparameters[i] = list[i]; + + return cip; +} + +static chunk_insert * +find_insert(png_const_charp what, png_charp param) +{ + png_uint_32 chunk = 0; + png_charp parameter_list[1024]; + int i, nparams; + + /* Assemble the chunk name */ + for (i=0; i<4; ++i) + { + char ch = what[i]; + + if ((ch >= 65 && ch <= 90) || (ch >= 97 && ch <= 122)) + chunk = (chunk << 8) + what[i]; + + else + break; + } + + if (i < 4 || what[4] != 0) + { + fprintf(stderr, "makepng --insert \"%s\": invalid chunk name\n", what); + exit(1); + } + + /* Assemble the parameter list. */ + nparams = find_parameters(what, param, parameter_list, 1024); + +# define CHUNK(a,b,c,d) (((a)<<24)+((b)<<16)+((c)<<8)+(d)) + + switch (chunk) + { + case CHUNK(105,67,67,80): /* iCCP */ + if (nparams == 2) + return make_insert(what, insert_iCCP, nparams, parameter_list); + break; + + case CHUNK(116,69,88,116): /* tEXt */ + if (nparams == 2) + return make_insert(what, insert_tEXt, nparams, parameter_list); + break; + + case CHUNK(122,84,88,116): /* zTXt */ + if (nparams == 2) + return make_insert(what, insert_zTXt, nparams, parameter_list); + break; + + case CHUNK(105,84,88,116): /* iTXt */ + if (nparams == 4) + return make_insert(what, insert_iTXt, nparams, parameter_list); + break; + + case CHUNK(104,73,83,84): /* hIST */ + if (nparams <= 256) + return make_insert(what, insert_hIST, nparams, parameter_list); + break; + + case CHUNK(115,66,73,84): /* sBIT */ + if (nparams <= 4) + return make_insert(what, insert_sBIT, nparams, parameter_list); + break; + +#if 0 + case CHUNK(115,80,76,84): /* sPLT */ + return make_insert(what, insert_sPLT, nparams, parameter_list); +#endif + + default: + fprintf(stderr, "makepng --insert \"%s\": unrecognized chunk name\n", + what); + exit(1); + } + + bad_parameter_count(what, nparams); + return NULL; +} + +/* This is necessary because libpng expects writeable strings for things like + * text chunks (maybe this should be fixed...) + */ +static png_charp +strstash(png_const_charp foo) +{ + /* The program indicates a memory allocation error by crashing, this is by + * design. + */ + if (foo != NULL) + { + png_charp bar = malloc(strlen(foo)+1); + return strcpy(bar, foo); + } + + return NULL; +} + +static png_charp +strstash_list(const png_const_charp *text) +{ + size_t foo = 0; + png_charp result, bar; + const png_const_charp *line = text; + + while (*line != NULL) + foo += strlen(*line++); + + result = bar = malloc(foo+1); + + line = text; + while (*line != NULL) + { + foo = strlen(*line); + memcpy(bar, *line++, foo); + bar += foo; + } + + *bar = 0; + return result; +} + +/* These are used to insert Copyright and Licence fields, they allow the text to + * have \n unlike the --insert option. + */ +static chunk_insert * +add_tEXt(const char *key, const png_const_charp *text) +{ + static char what[5] = { 116, 69, 88, 116, 0 }; + png_charp parameter_list[3]; + + parameter_list[0] = strstash(key); + parameter_list[1] = strstash_list(text); + parameter_list[2] = NULL; + + return make_insert(what, insert_tEXt, 2, parameter_list); +} + +static chunk_insert * +add_iTXt(const char *key, const char *language, const char *language_key, + const png_const_charp *text) +{ + static char what[5] = { 105, 84, 88, 116, 0 }; + png_charp parameter_list[5]; + + parameter_list[0] = strstash(key); + parameter_list[1] = strstash(language); + parameter_list[2] = strstash(language_key); + parameter_list[3] = strstash_list(text); + parameter_list[4] = NULL; + + return make_insert(what, insert_iTXt, 4, parameter_list); +} + +/* This is a not-very-good parser for a sequence of numbers (including 0). It + * doesn't accept some apparently valid things, but it accepts all the sensible + * combinations. + */ +static void +parse_color(char *arg, unsigned int *colors) +{ + unsigned int ncolors = 0; + + while (*arg && ncolors < 4) + { + char *ep = arg; + + unsigned long ul = strtoul(arg, &ep, 0); + + if (ul > 65535) + { + fprintf(stderr, "makepng --color=...'%s': too big\n", arg); + exit(1); + } + + if (ep == arg) + { + fprintf(stderr, "makepng --color=...'%s': not a valid color\n", arg); + exit(1); + } + + if (*ep) ++ep; /* skip a separator */ + arg = ep; + + colors[++ncolors] = (unsigned int)ul; /* checked above */ + } + + if (*arg) + { + fprintf(stderr, "makepng --color=...'%s': too many values\n", arg); + exit(1); + } + + *colors = ncolors; +} + +int +main(int argc, char **argv) +{ + FILE *fp = stdout; + const char *file_name = NULL; + int color_type = 8; /* invalid */ + int bit_depth = 32; /* invalid */ + int small = 0; /* make full size images */ + int tRNS = 0; /* don't output a tRNS chunk */ + unsigned int colors[5]; + unsigned int filters = PNG_ALL_FILTERS; + png_fixed_point gamma = 0; /* not set */ + chunk_insert *head_insert = NULL; + chunk_insert **insert_ptr = &head_insert; + + memset(colors, 0, sizeof colors); + + while (--argc > 0) + { + char *arg = *++argv; + + if (strcmp(arg, "--small") == 0) + { + small = 1; + continue; + } + + if (strcmp(arg, "--tRNS") == 0) + { + tRNS = 1; + continue; + } + + if (strcmp(arg, "--sRGB") == 0) + { + gamma = PNG_DEFAULT_sRGB; + continue; + } + + if (strcmp(arg, "--linear") == 0) + { + gamma = PNG_FP_1; + continue; + } + + if (strcmp(arg, "--1.8") == 0) + { + gamma = PNG_GAMMA_MAC_18; + continue; + } + + if (strcmp(arg, "--nofilters") == 0) + { + filters = PNG_FILTER_NONE; + continue; + } + + if (strncmp(arg, "--color=", 8) == 0) + { + parse_color(arg+8, colors); + continue; + } + + if (argc >= 3 && strcmp(arg, "--insert") == 0) + { + png_const_charp what = *++argv; + png_charp param = *++argv; + chunk_insert *new_insert; + + argc -= 2; + + new_insert = find_insert(what, param); + + if (new_insert != NULL) + { + *insert_ptr = new_insert; + insert_ptr = &new_insert->next; + } + + continue; + } + + if (arg[0] == '-') + { + fprintf(stderr, "makepng: %s: invalid option\n", arg); + exit(1); + } + + if (strcmp(arg, "palette") == 0) + { + color_type = PNG_COLOR_TYPE_PALETTE; + continue; + } + + if (strncmp(arg, "gray", 4) == 0) + { + if (arg[4] == 0) + { + color_type = PNG_COLOR_TYPE_GRAY; + continue; + } + + else if (strcmp(arg+4, "a") == 0 || + strcmp(arg+4, "alpha") == 0 || + strcmp(arg+4, "-alpha") == 0) + { + color_type = PNG_COLOR_TYPE_GRAY_ALPHA; + continue; + } + } + + if (strncmp(arg, "rgb", 3) == 0) + { + if (arg[3] == 0) + { + color_type = PNG_COLOR_TYPE_RGB; + continue; + } + + else if (strcmp(arg+3, "a") == 0 || + strcmp(arg+3, "alpha") == 0 || + strcmp(arg+3, "-alpha") == 0) + { + color_type = PNG_COLOR_TYPE_RGB_ALPHA; + continue; + } + } + + if (color_type == 8 && isdigit(arg[0])) + { + color_type = atoi(arg); + if (color_type < 0 || color_type > 6 || color_type == 1 || + color_type == 5) + { + fprintf(stderr, "makepng: %s: not a valid color type\n", arg); + exit(1); + } + + continue; + } + + if (bit_depth == 32 && isdigit(arg[0])) + { + bit_depth = atoi(arg); + if (bit_depth <= 0 || bit_depth > 16 || + (bit_depth & -bit_depth) != bit_depth) + { + fprintf(stderr, "makepng: %s: not a valid bit depth\n", arg); + exit(1); + } + + continue; + } + + if (argc == 1) /* It's the file name */ + { + fp = fopen(arg, "wb"); + if (fp == NULL) + { + fprintf(stderr, "%s: %s: could not open\n", arg, strerror(errno)); + exit(1); + } + + file_name = arg; + continue; + } + + fprintf(stderr, "makepng: %s: unknown argument\n", arg); + exit(1); + } /* argument while loop */ + + if (color_type == 8 || bit_depth == 32) + { + fprintf(stderr, "usage: makepng [--small] [--sRGB|--linear|--1.8] " + "[--color=...] color-type bit-depth [file-name]\n" + " Make a test PNG file, by default writes to stdout.\n" + " Other options are available, UTSL.\n"); + exit(1); + } + + /* Check the colors */ + { + const unsigned int lim = (color_type == PNG_COLOR_TYPE_PALETTE ? 255U : + (1U< lim) + { + fprintf(stderr, "makepng: --color=...: %u out of range [0..%u]\n", + colors[i], lim); + exit(1); + } + } + + /* small and colors are incomparible (will probably crash if both are used at + * the same time!) + */ + if (small && colors[0] != 0) + { + fprintf(stderr, "makepng: --color --small: only one at a time!\n"); + exit(1); + } + + /* Restrict the filters for more speed to those we know are used for the + * generated images. + */ + if (filters == PNG_ALL_FILTERS && !small/*small provides defaults*/) + { + if ((color_type & PNG_COLOR_MASK_PALETTE) != 0 || bit_depth < 8) + filters = PNG_FILTER_NONE; + + else if (color_type & PNG_COLOR_MASK_COLOR) /* rgb */ + { + if (bit_depth == 8) + filters &= ~(PNG_FILTER_NONE | PNG_FILTER_AVG); + + else + filters = PNG_FILTER_SUB | PNG_FILTER_PAETH; + } + + else /* gray 8 or 16-bit */ + filters &= ~PNG_FILTER_NONE; + } + + /* Insert standard copyright and licence text. */ + { + static png_const_charp copyright[] = + { + COPYRIGHT, /* ISO-Latin-1 */ + NULL + }; + static png_const_charp licensing[] = + { + IMAGE_LICENSING, /* UTF-8 */ + NULL + }; + + chunk_insert *new_insert; + + new_insert = add_tEXt("Copyright", copyright); + if (new_insert != NULL) + { + *insert_ptr = new_insert; + insert_ptr = &new_insert->next; + } + + new_insert = add_iTXt("Licensing", "en", NULL, licensing); + if (new_insert != NULL) + { + *insert_ptr = new_insert; + insert_ptr = &new_insert->next; + } + } + + { + int ret = write_png(&file_name, fp, color_type, bit_depth, gamma, + head_insert, filters, colors, small, tRNS); + + if (ret != 0 && file_name != NULL) + remove(file_name); + + return ret; + } +} diff --git a/compat/libpng/contrib/libtests/pngimage.c b/compat/libpng/contrib/libtests/pngimage.c new file mode 100755 index 0000000..442b2f4 --- /dev/null +++ b/compat/libpng/contrib/libtests/pngimage.c @@ -0,0 +1,1687 @@ +/* pngimage.c + * + * Copyright (c) 2015 John Cunningham Bowler + * + * Last changed in libpng 1.6.20 [December 3, 2015] + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + * Test the png_read_png and png_write_png interfaces. Given a PNG file load it + * using png_read_png and then write with png_write_png. Test all possible + * transforms. + */ +#include +#include +#include +#include +#include +#include + +#if defined(HAVE_CONFIG_H) && !defined(PNG_NO_CONFIG_H) +# include +#endif + +/* Define the following to use this test against your installed libpng, rather + * than the one being built here: + */ +#ifdef PNG_FREESTANDING_TESTS +# include +#else +# include "../../png.h" +#endif + +#ifndef PNG_SETJMP_SUPPORTED +# include /* because png.h did *not* include this */ +#endif + +#if defined(PNG_INFO_IMAGE_SUPPORTED) && defined(PNG_SEQUENTIAL_READ_SUPPORTED)\ + && (defined(PNG_READ_PNG_SUPPORTED) || PNG_LIBPNG_VER < 10700) +/* If a transform is valid on both read and write this implies that if the + * transform is applied to read it must also be applied on write to produce + * meaningful data. This is because these transforms when performed on read + * produce data with a memory format that does not correspond to a PNG format. + * + * Most of these transforms are invertible; after applying the transform on + * write the result is the original PNG data that would have would have been + * read if no transform were applied. + * + * The exception is _SHIFT, which destroys the low order bits marked as not + * significant in a PNG with the sBIT chunk. + * + * The following table lists, for each transform, the conditions under which it + * is expected to do anything. Conditions are defined as follows: + * + * 1) Color mask bits required - simply a mask to AND with color_type; one of + * these must be present for the transform to fire, except that 0 means + * 'always'. + * 2) Color mask bits which must be absent - another mask - none of these must + * be present. + * 3) Bit depths - a mask of component bit depths for the transform to fire. + * 4) 'read' - the transform works in png_read_png. + * 5) 'write' - the transform works in png_write_png. + * 6) PNG_INFO_chunk; a mask of the chunks that must be present for the + * transform to fire. All must be present - the requirement is that + * png_get_valid() & mask == mask, so if mask is 0 there is no requirement. + * + * The condition refers to the original image state - if multiple transforms are + * used together it is possible to cause a transform that wouldn't fire on the + * original image to fire. + */ +static struct transform_info +{ + const char *name; + int transform; + png_uint_32 valid_chunks; +# define CHUNK_NONE 0 +# define CHUNK_sBIT PNG_INFO_sBIT +# define CHUNK_tRNS PNG_INFO_tRNS + png_byte color_mask_required; + png_byte color_mask_absent; +# define COLOR_MASK_X 0 +# define COLOR_MASK_P PNG_COLOR_MASK_PALETTE +# define COLOR_MASK_C PNG_COLOR_MASK_COLOR +# define COLOR_MASK_A PNG_COLOR_MASK_ALPHA +# define COLOR_MASK_ALL (PALETTE+COLOR+ALPHA) /* absent = gray, no alpha */ + png_byte bit_depths; +# define BD_ALL (1 + 2 + 4 + 8 + 16) +# define BD_PAL (1 + 2 + 4 + 8) +# define BD_LOW (1 + 2 + 4) +# define BD_16 16 +# define BD_TRUE (8+16) /* i.e. true-color depths */ + png_byte when; +# define TRANSFORM_R 1 +# define TRANSFORM_W 2 +# define TRANSFORM_RW 3 + png_byte tested; /* the transform was tested somewhere */ +} transform_info[] = +{ + /* List ALL the PNG_TRANSFORM_ macros here. Check for support using the READ + * macros; even if the transform is supported on write it cannot be tested + * without the read support. + */ +# define T(name,chunk,cm_required,cm_absent,bd,when)\ + { #name, PNG_TRANSFORM_ ## name, CHUNK_ ## chunk,\ + COLOR_MASK_ ## cm_required, COLOR_MASK_ ## cm_absent, BD_ ## bd,\ + TRANSFORM_ ## when, 0/*!tested*/ } + +#ifdef PNG_READ_STRIP_16_TO_8_SUPPORTED + T(STRIP_16, NONE, X, X, 16, R), + /* drops the bottom 8 bits when bit depth is 16 */ +#endif +#ifdef PNG_READ_STRIP_ALPHA_SUPPORTED + T(STRIP_ALPHA, NONE, A, X, ALL, R), + /* removes the alpha channel if present */ +#endif +#ifdef PNG_WRITE_PACK_SUPPORTED +# define TRANSFORM_RW_PACK TRANSFORM_RW +#else +# define TRANSFORM_RW_PACK TRANSFORM_R +#endif +#ifdef PNG_READ_PACK_SUPPORTED + T(PACKING, NONE, X, X, LOW, RW_PACK), + /* unpacks low-bit-depth components into 1 byte per component on read, + * reverses this on write. + */ +#endif +#ifdef PNG_WRITE_PACKSWAP_SUPPORTED +# define TRANSFORM_RW_PACKSWAP TRANSFORM_RW +#else +# define TRANSFORM_RW_PACKSWAP TRANSFORM_R +#endif +#ifdef PNG_READ_PACKSWAP_SUPPORTED + T(PACKSWAP, NONE, X, X, LOW, RW_PACKSWAP), + /* reverses the order of low-bit-depth components packed into a byte */ +#endif +#ifdef PNG_READ_EXPAND_SUPPORTED + T(EXPAND, NONE, P, X, ALL, R), + /* expands PLTE PNG files to RGB (no tRNS) or RGBA (tRNS) * + * Note that the 'EXPAND' transform does lots of different things: */ + T(EXPAND, NONE, X, C, ALL, R), + /* expands grayscale PNG files to RGB, or RGBA */ + T(EXPAND, tRNS, X, A, ALL, R), + /* expands the tRNS chunk in files without alpha */ +#endif +#ifdef PNG_WRITE_INVERT_SUPPORTED +# define TRANSFORM_RW_INVERT TRANSFORM_RW +#else +# define TRANSFORM_RW_INVERT TRANSFORM_R +#endif +#ifdef PNG_READ_INVERT_SUPPORTED + T(INVERT_MONO, NONE, X, C, ALL, RW_INVERT), + /* converts gray-scale components to 1..0 from 0..1 */ +#endif +#ifdef PNG_WRITE_SHIFT_SUPPORTED +# define TRANSFORM_RW_SHIFT TRANSFORM_RW +#else +# define TRANSFORM_RW_SHIFT TRANSFORM_R +#endif +#ifdef PNG_READ_SHIFT_SUPPORTED + T(SHIFT, sBIT, X, X, ALL, RW_SHIFT), + /* reduces component values to the original range based on the sBIT chunk, + * this is only partially reversible - the low bits are lost and cannot be + * recovered on write. In fact write code replicates the bits to generate + * new low-order bits. + */ +#endif +#ifdef PNG_WRITE_BGR_SUPPORTED +# define TRANSFORM_RW_BGR TRANSFORM_RW +#else +# define TRANSFORM_RW_BGR TRANSFORM_R +#endif +#ifdef PNG_READ_BGR_SUPPORTED + T(BGR, NONE, C, P, TRUE, RW_BGR), + /* reverses the rgb component values of true-color pixels */ +#endif +#ifdef PNG_WRITE_SWAP_ALPHA_SUPPORTED +# define TRANSFORM_RW_SWAP_ALPHA TRANSFORM_RW +#else +# define TRANSFORM_RW_SWAP_ALPHA TRANSFORM_R +#endif +#ifdef PNG_READ_SWAP_ALPHA_SUPPORTED + T(SWAP_ALPHA, NONE, A, X, TRUE, RW_SWAP_ALPHA), + /* swaps the alpha channel of RGBA or GA pixels to the front - ARGB or + * AG, on write reverses the process. + */ +#endif +#ifdef PNG_WRITE_SWAP_SUPPORTED +# define TRANSFORM_RW_SWAP TRANSFORM_RW +#else +# define TRANSFORM_RW_SWAP TRANSFORM_R +#endif +#ifdef PNG_READ_SWAP_SUPPORTED + T(SWAP_ENDIAN, NONE, X, P, 16, RW_SWAP), + /* byte-swaps 16-bit component values */ +#endif +#ifdef PNG_WRITE_INVERT_ALPHA_SUPPORTED +# define TRANSFORM_RW_INVERT_ALPHA TRANSFORM_RW +#else +# define TRANSFORM_RW_INVERT_ALPHA TRANSFORM_R +#endif +#ifdef PNG_READ_INVERT_ALPHA_SUPPORTED + T(INVERT_ALPHA, NONE, A, X, TRUE, RW_INVERT_ALPHA), + /* converts an alpha channel from 0..1 to 1..0 */ +#endif +#ifdef PNG_WRITE_FILLER_SUPPORTED + T(STRIP_FILLER_BEFORE, NONE, A, P, TRUE, W), /* 'A' for a filler! */ + /* on write skips a leading filler channel; testing requires data with a + * filler channel so this is produced from RGBA or GA images by removing + * the 'alpha' flag from the color type in place. + */ + T(STRIP_FILLER_AFTER, NONE, A, P, TRUE, W), + /* on write strips a trailing filler channel */ +#endif +#ifdef PNG_READ_GRAY_TO_RGB_SUPPORTED + T(GRAY_TO_RGB, NONE, X, C, ALL, R), + /* expands grayscale images to RGB, also causes the palette part of + * 'EXPAND' to happen. Low bit depth grayscale images are expanded to + * 8-bits per component and no attempt is made to convert the image to a + * palette image. While this transform is partially reversible + * png_write_png does not currently support this. + */ + T(GRAY_TO_RGB, NONE, P, X, ALL, R), + /* The 'palette' side effect mentioned above; a bit bogus but this is the + * way the libpng code works. + */ +#endif +#ifdef PNG_READ_EXPAND_16_SUPPORTED + T(EXPAND_16, NONE, X, X, PAL, R), + /* expands images to 16-bits per component, as a side effect expands + * palette images to RGB and expands the tRNS chunk if present, so it can + * modify 16-bit per component images as well: + */ + T(EXPAND_16, tRNS, X, A, 16, R), + /* side effect of EXPAND_16 - expands the tRNS chunk in an RGB or G 16-bit + * image. + */ +#endif +#ifdef PNG_READ_SCALE_16_TO_8_SUPPORTED + T(SCALE_16, NONE, X, X, 16, R), + /* scales 16-bit components to 8-bits. */ +#endif + + { NULL /*name*/, 0, 0, 0, 0, 0, 0, 0/*!tested*/ } + +#undef T +}; + +#define ARRAY_SIZE(a) ((sizeof a)/(sizeof a[0])) +#define TTABLE_SIZE ARRAY_SIZE(transform_info) + +/* Some combinations of options that should be reversible are not; these cases + * are bugs. + */ +static int known_bad_combos[][2] = +{ + /* problem, antidote */ + { PNG_TRANSFORM_SHIFT | PNG_TRANSFORM_INVERT_ALPHA, 0/*antidote*/ } +}; + +static int +is_combo(int transforms) +{ + return transforms & (transforms-1); /* non-zero if more than one set bit */ +} + +static int +first_transform(int transforms) +{ + return transforms & -transforms; /* lowest set bit */ +} + +static int +is_bad_combo(int transforms) +{ + unsigned int i; + + for (i=0; ifirst.next = NULL; + buffer->last = NULL; + buffer->current = NULL; +} + +static void +buffer_destroy_list(struct buffer_list *list) +{ + if (list != NULL) + { + struct buffer_list *next = list->next; + DELETE(list); + buffer_destroy_list(next); + } +} + +static void +buffer_destroy(struct buffer *buffer) +{ + struct buffer_list *list = buffer->first.next; + buffer_init(buffer); + buffer_destroy_list(list); +} + +#ifdef PNG_WRITE_SUPPORTED +static void +buffer_start_write(struct buffer *buffer) +{ + buffer->last = &buffer->first; + buffer->end_count = 0; + buffer->current = NULL; +} +#endif + +static void +buffer_start_read(struct buffer *buffer) +{ + buffer->current = &buffer->first; + buffer->read_count = 0; +} + +#ifdef ENOMEM /* required by POSIX 1003.1 */ +# define MEMORY ENOMEM +#else +# define MEMORY ERANGE /* required by ANSI-C */ +#endif +static struct buffer * +get_buffer(png_structp pp) + /* Used from libpng callbacks to get the current buffer */ +{ + return (struct buffer*)png_get_io_ptr(pp); +} + +static struct buffer_list * +buffer_extend(struct buffer_list *current) +{ + struct buffer_list *add; + + assert(current->next == NULL); + + add = NEW(struct buffer_list); + if (add == NULL) + return NULL; + + add->next = NULL; + current->next = add; + + return add; +} + +/* Load a buffer from a file; does the equivalent of buffer_start_write. On a + * read error returns an errno value, else returns 0. + */ +static int +buffer_from_file(struct buffer *buffer, FILE *fp) +{ + struct buffer_list *last = &buffer->first; + size_t count = 0; + + for (;;) + { + size_t r = fread(last->buffer+count, 1/*size*/, + (sizeof last->buffer)-count, fp); + + if (r > 0) + { + count += r; + + if (count >= sizeof last->buffer) + { + assert(count == sizeof last->buffer); + count = 0; + + if (last->next == NULL) + { + last = buffer_extend(last); + if (last == NULL) + return MEMORY; + } + + else + last = last->next; + } + } + + else /* fread failed - probably end of file */ + { + if (feof(fp)) + { + buffer->last = last; + buffer->end_count = count; + return 0; /* no error */ + } + + /* Some kind of funky error; errno should be non-zero */ + return errno == 0 ? ERANGE : errno; + } + } +} + +/* This structure is used to control the test of a single file. */ +typedef enum +{ + VERBOSE, /* switches on all messages */ + INFORMATION, + WARNINGS, /* switches on warnings */ + LIBPNG_WARNING, + APP_WARNING, + ERRORS, /* just errors */ + APP_FAIL, /* continuable error - no need to longjmp */ + LIBPNG_ERROR, /* this and higher cause a longjmp */ + LIBPNG_BUG, /* erroneous behavior in libpng */ + APP_ERROR, /* such as out-of-memory in a callback */ + QUIET, /* no normal messages */ + USER_ERROR, /* such as file-not-found */ + INTERNAL_ERROR +} error_level; +#define LEVEL_MASK 0xf /* where the level is in 'options' */ + +#define EXHAUSTIVE 0x010 /* Test all combinations of active options */ +#define STRICT 0x020 /* Fail on warnings as well as errors */ +#define LOG 0x040 /* Log pass/fail to stdout */ +#define CONTINUE 0x080 /* Continue on APP_FAIL errors */ +#define SKIP_BUGS 0x100 /* Skip over known bugs */ +#define LOG_SKIPPED 0x200 /* Log skipped bugs */ +#define FIND_BAD_COMBOS 0x400 /* Attempt to deduce bad combos */ +#define LIST_COMBOS 0x800 /* List combos by name */ + +/* Result masks apply to the result bits in the 'results' field below; these + * bits are simple 1U<options = WARNINGS; /* default to !verbose, !quiet */ + dp->filename = NULL; + dp->operation = NULL; + dp->original_pp = NULL; + dp->original_ip = NULL; + dp->original_rows = NULL; + dp->read_pp = NULL; + dp->read_ip = NULL; + buffer_init(&dp->original_file); + +# ifdef PNG_WRITE_SUPPORTED + dp->write_pp = NULL; + buffer_init(&dp->written_file); +# endif +} + +static void +display_clean_read(struct display *dp) +{ + if (dp->read_pp != NULL) + png_destroy_read_struct(&dp->read_pp, &dp->read_ip, NULL); +} + +#ifdef PNG_WRITE_SUPPORTED +static void +display_clean_write(struct display *dp) +{ + if (dp->write_pp != NULL) + png_destroy_write_struct(&dp->write_pp, NULL); +} +#endif + +static void +display_clean(struct display *dp) +{ +# ifdef PNG_WRITE_SUPPORTED + display_clean_write(dp); +# endif + display_clean_read(dp); + + dp->original_rowbytes = 0; + dp->original_rows = NULL; + dp->chunks = 0; + + png_destroy_read_struct(&dp->original_pp, &dp->original_ip, NULL); + /* leave the filename for error detection */ + dp->results = 0; /* reset for next time */ +} + +static void +display_destroy(struct display *dp) +{ + /* Release any memory held in the display. */ +# ifdef PNG_WRITE_SUPPORTED + buffer_destroy(&dp->written_file); +# endif + + buffer_destroy(&dp->original_file); +} + +static struct display * +get_dp(png_structp pp) + /* The display pointer is always stored in the png_struct error pointer */ +{ + struct display *dp = (struct display*)png_get_error_ptr(pp); + + if (dp == NULL) + { + fprintf(stderr, "pngimage: internal error (no display)\n"); + exit(99); /* prevents a crash */ + } + + return dp; +} + +/* error handling */ +#ifdef __GNUC__ +# define VGATTR __attribute__((__format__ (__printf__,3,4))) + /* Required to quiet GNUC warnings when the compiler sees a stdarg function + * that calls one of the stdio v APIs. + */ +#else +# define VGATTR +#endif +static void VGATTR +display_log(struct display *dp, error_level level, const char *fmt, ...) + /* 'level' is as above, fmt is a stdio style format string. This routine + * does not return if level is above LIBPNG_WARNING + */ +{ + dp->results |= 1U << level; + + if (level > (error_level)(dp->options & LEVEL_MASK)) + { + const char *lp; + va_list ap; + + switch (level) + { + case INFORMATION: lp = "information"; break; + case LIBPNG_WARNING: lp = "warning(libpng)"; break; + case APP_WARNING: lp = "warning(pngimage)"; break; + case APP_FAIL: lp = "error(continuable)"; break; + case LIBPNG_ERROR: lp = "error(libpng)"; break; + case LIBPNG_BUG: lp = "bug(libpng)"; break; + case APP_ERROR: lp = "error(pngimage)"; break; + case USER_ERROR: lp = "error(user)"; break; + + case INTERNAL_ERROR: /* anything unexpected is an internal error: */ + case VERBOSE: case WARNINGS: case ERRORS: case QUIET: + default: lp = "bug(pngimage)"; break; + } + + fprintf(stderr, "%s: %s: %s", + dp->filename != NULL ? dp->filename : "", lp, dp->operation); + + if (dp->transforms != 0) + { + int tr = dp->transforms; + + if (is_combo(tr)) + { + if (dp->options & LIST_COMBOS) + { + int trx = tr; + + fprintf(stderr, "("); + if (trx) + { + int start = 0; + + while (trx) + { + int trz = trx & -trx; + + if (start) fprintf(stderr, "+"); + fprintf(stderr, "%s", transform_name(trz)); + start = 1; + trx &= ~trz; + } + } + + else + fprintf(stderr, "-"); + fprintf(stderr, ")"); + } + + else + fprintf(stderr, "(0x%x)", tr); + } + + else + fprintf(stderr, "(%s)", transform_name(tr)); + } + + fprintf(stderr, ": "); + + va_start(ap, fmt); + vfprintf(stderr, fmt, ap); + va_end(ap); + + fputc('\n', stderr); + } + /* else do not output any message */ + + /* Errors cause this routine to exit to the fail code */ + if (level > APP_FAIL || (level > ERRORS && !(dp->options & CONTINUE))) + longjmp(dp->error_return, level); +} + +/* error handler callbacks for libpng */ +static void PNGCBAPI +display_warning(png_structp pp, png_const_charp warning) +{ + display_log(get_dp(pp), LIBPNG_WARNING, "%s", warning); +} + +static void PNGCBAPI +display_error(png_structp pp, png_const_charp error) +{ + struct display *dp = get_dp(pp); + + display_log(dp, LIBPNG_ERROR, "%s", error); +} + +static void +display_cache_file(struct display *dp, const char *filename) + /* Does the initial cache of the file. */ +{ + FILE *fp; + int ret; + + dp->filename = filename; + + if (filename != NULL) + { + fp = fopen(filename, "rb"); + if (fp == NULL) + display_log(dp, USER_ERROR, "open failed: %s", strerror(errno)); + } + + else + fp = stdin; + + ret = buffer_from_file(&dp->original_file, fp); + + fclose(fp); + + if (ret != 0) + display_log(dp, APP_ERROR, "read failed: %s", strerror(ret)); +} + +static void +buffer_read(struct display *dp, struct buffer *bp, png_bytep data, + png_size_t size) +{ + struct buffer_list *last = bp->current; + size_t read_count = bp->read_count; + + while (size > 0) + { + size_t avail; + + if (last == NULL || + (last == bp->last && read_count >= bp->end_count)) + { + display_log(dp, USER_ERROR, "file truncated (%lu bytes)", + (unsigned long)size); + /*NOTREACHED*/ + break; + } + + else if (read_count >= sizeof last->buffer) + { + /* Move to the next buffer: */ + last = last->next; + read_count = 0; + bp->current = last; /* Avoid update outside the loop */ + + /* And do a sanity check (the EOF case is caught above) */ + if (last == NULL) + { + display_log(dp, INTERNAL_ERROR, "damaged buffer list"); + /*NOTREACHED*/ + break; + } + } + + avail = (sizeof last->buffer) - read_count; + if (avail > size) + avail = size; + + memcpy(data, last->buffer + read_count, avail); + read_count += avail; + size -= avail; + data += avail; + } + + bp->read_count = read_count; +} + +static void PNGCBAPI +read_function(png_structp pp, png_bytep data, png_size_t size) +{ + buffer_read(get_dp(pp), get_buffer(pp), data, size); +} + +static void +read_png(struct display *dp, struct buffer *bp, const char *operation, + int transforms) +{ + png_structp pp; + png_infop ip; + + /* This cleans out any previous read and sets operation and transforms to + * empty. + */ + display_clean_read(dp); + + if (operation != NULL) /* else this is a verify and do not overwrite info */ + { + dp->operation = operation; + dp->transforms = transforms; + } + + dp->read_pp = pp = png_create_read_struct(PNG_LIBPNG_VER_STRING, dp, + display_error, display_warning); + if (pp == NULL) + display_log(dp, LIBPNG_ERROR, "failed to create read struct"); + + /* The png_read_png API requires us to make the info struct, but it does the + * call to png_read_info. + */ + dp->read_ip = ip = png_create_info_struct(pp); + if (ip == NULL) + display_log(dp, LIBPNG_ERROR, "failed to create info struct"); + +# ifdef PNG_SET_USER_LIMITS_SUPPORTED + /* Remove the user limits, if any */ + png_set_user_limits(pp, 0x7fffffff, 0x7fffffff); +# endif + + /* Set the IO handling */ + buffer_start_read(bp); + png_set_read_fn(pp, bp, read_function); + + png_read_png(pp, ip, transforms, NULL/*params*/); + +#if 0 /* crazy debugging */ + { + png_bytep pr = png_get_rows(pp, ip)[0]; + size_t rb = png_get_rowbytes(pp, ip); + size_t cb; + char c = ' '; + + fprintf(stderr, "%.4x %2d (%3lu bytes):", transforms, png_get_bit_depth(pp,ip), (unsigned long)rb); + + for (cb=0; cboriginal_file, "original read", 0/*no transform*/); + + /* Move the result to the 'original' fields */ + dp->original_pp = pp = dp->read_pp, dp->read_pp = NULL; + dp->original_ip = ip = dp->read_ip, dp->read_ip = NULL; + + dp->original_rowbytes = png_get_rowbytes(pp, ip); + if (dp->original_rowbytes == 0) + display_log(dp, LIBPNG_BUG, "png_get_rowbytes returned 0"); + + dp->chunks = png_get_valid(pp, ip, 0xffffffff); + if ((dp->chunks & PNG_INFO_IDAT) == 0) /* set by png_read_png */ + display_log(dp, LIBPNG_BUG, "png_read_png did not set IDAT flag"); + + dp->original_rows = png_get_rows(pp, ip); + if (dp->original_rows == NULL) + display_log(dp, LIBPNG_BUG, "png_read_png did not create row buffers"); + + if (!png_get_IHDR(pp, ip, + &dp->width, &dp->height, &dp->bit_depth, &dp->color_type, + &dp->interlace_method, &dp->compression_method, &dp->filter_method)) + display_log(dp, LIBPNG_BUG, "png_get_IHDR failed"); + + /* 'active' transforms are discovered based on the original image format; + * running one active transform can activate others. At present the code + * does not attempt to determine the closure. + */ + { + png_uint_32 chunks = dp->chunks; + int active = 0, inactive = 0; + int ct = dp->color_type; + int bd = dp->bit_depth; + unsigned int i; + + for (i=0; iactive_transforms = active; + dp->ignored_transforms = inactive; /* excluding write-only transforms */ + } +} + +static int +compare_read(struct display *dp, int applied_transforms) +{ + /* Compare the png_info from read_ip with original_info */ + size_t rowbytes; + png_uint_32 width, height; + int bit_depth, color_type; + int interlace_method, compression_method, filter_method; + const char *e = NULL; + + png_get_IHDR(dp->read_pp, dp->read_ip, &width, &height, &bit_depth, + &color_type, &interlace_method, &compression_method, &filter_method); + +# define C(item) if (item != dp->item) \ + display_log(dp, APP_WARNING, "IHDR " #item "(%lu) changed to %lu",\ + (unsigned long)dp->item, (unsigned long)item), e = #item + + /* The IHDR should be identical: */ + C(width); + C(height); + C(bit_depth); + C(color_type); + C(interlace_method); + C(compression_method); + C(filter_method); + + /* 'e' remains set to the name of the last thing changed: */ + if (e) + display_log(dp, APP_ERROR, "IHDR changed (%s)", e); + + /* All the chunks from the original PNG should be preserved in the output PNG + * because the PNG format has not been changed. + */ + { + unsigned long chunks = + png_get_valid(dp->read_pp, dp->read_ip, 0xffffffff); + + if (chunks != dp->chunks) + display_log(dp, APP_FAIL, "PNG chunks changed from 0x%lx to 0x%lx", + (unsigned long)dp->chunks, chunks); + } + + /* rowbytes should be the same */ + rowbytes = png_get_rowbytes(dp->read_pp, dp->read_ip); + + /* NOTE: on 64-bit systems this may trash the top bits of rowbytes, + * which could lead to weird error messages. + */ + if (rowbytes != dp->original_rowbytes) + display_log(dp, APP_ERROR, "PNG rowbytes changed from %lu to %lu", + (unsigned long)dp->original_rowbytes, (unsigned long)rowbytes); + + /* The rows should be the same too, unless the applied transforms includes + * the shift transform, in which case low bits may have been lost. + */ + { + png_bytepp rows = png_get_rows(dp->read_pp, dp->read_ip); + unsigned int mask; /* mask (if not zero) for the final byte */ + + if (bit_depth < 8) + { + /* Need the stray bits at the end, this depends only on the low bits + * of the image width; overflow does not matter. If the width is an + * exact multiple of 8 bits this gives a mask of 0, not 0xff. + */ + mask = 0xff & (0xff00 >> ((bit_depth * width) & 7)); + } + + else + mask = 0; + + if (rows == NULL) + display_log(dp, LIBPNG_BUG, "png_get_rows returned NULL"); + + if ((applied_transforms & PNG_TRANSFORM_SHIFT) == 0 || + (dp->active_transforms & PNG_TRANSFORM_SHIFT) == 0 || + color_type == PNG_COLOR_TYPE_PALETTE) + { + unsigned long y; + + for (y=0; yoriginal_rows[y]; + + if (memcmp(row, orig, rowbytes-(mask != 0)) != 0 || (mask != 0 && + ((row[rowbytes-1] & mask) != (orig[rowbytes-1] & mask)))) + { + size_t x; + + /* Find the first error */ + for (x=0; x 0x%.2x", + (unsigned long)x, (unsigned long)y, orig[x], row[x]); + return 0; /* don't keep reporting failed rows on 'continue' */ + } + } + } + + else + { + unsigned long y; + int bpp; /* bits-per-pixel then bytes-per-pixel */ + /* components are up to 8 bytes in size */ + png_byte sig_bits[8]; + png_color_8p sBIT; + + if (png_get_sBIT(dp->read_pp, dp->read_ip, &sBIT) != PNG_INFO_sBIT) + display_log(dp, INTERNAL_ERROR, + "active shift transform but no sBIT in file"); + + switch (color_type) + { + case PNG_COLOR_TYPE_GRAY: + sig_bits[0] = sBIT->gray; + bpp = bit_depth; + break; + + case PNG_COLOR_TYPE_GA: + sig_bits[0] = sBIT->gray; + sig_bits[1] = sBIT->alpha; + bpp = 2 * bit_depth; + break; + + case PNG_COLOR_TYPE_RGB: + sig_bits[0] = sBIT->red; + sig_bits[1] = sBIT->green; + sig_bits[2] = sBIT->blue; + bpp = 3 * bit_depth; + break; + + case PNG_COLOR_TYPE_RGBA: + sig_bits[0] = sBIT->red; + sig_bits[1] = sBIT->green; + sig_bits[2] = sBIT->blue; + sig_bits[3] = sBIT->alpha; + bpp = 4 * bit_depth; + break; + + default: + display_log(dp, LIBPNG_ERROR, "invalid colour type %d", + color_type); + /*NOTREACHED*/ + bpp = 0; + break; + } + + { + int b; + + for (b=0; 8*b bit_depth/*!palette*/) + display_log(dp, LIBPNG_BUG, + "invalid sBIT[%u] value %d returned for PNG bit depth %d", + b, sig_bits[b], bit_depth); + } + } + + if (bpp < 8 && bpp != bit_depth) + { + /* sanity check; this is a grayscale PNG; something is wrong in the + * code above. + */ + display_log(dp, INTERNAL_ERROR, "invalid bpp %u for bit_depth %u", + bpp, bit_depth); + } + + switch (bit_depth) + { + int b; + + case 16: /* Two bytes per component, big-endian */ + for (b = (bpp >> 4); b > 0; --b) + { + unsigned int sig = (unsigned int)(0xffff0000 >> sig_bits[b]); + + sig_bits[2*b+1] = (png_byte)sig; + sig_bits[2*b+0] = (png_byte)(sig >> 8); /* big-endian */ + } + break; + + case 8: /* One byte per component */ + for (b=0; b*8 < bpp; ++b) + sig_bits[b] = (png_byte)(0xff00 >> sig_bits[b]); + break; + + case 1: /* allowed, but dumb */ + /* Value is 1 */ + sig_bits[0] = 0xff; + break; + + case 2: /* Replicate 4 times */ + /* Value is 1 or 2 */ + b = 0x3 & ((0x3<<2) >> sig_bits[0]); + b |= b << 2; + b |= b << 4; + sig_bits[0] = (png_byte)b; + break; + + case 4: /* Relicate twice */ + /* Value is 1, 2, 3 or 4 */ + b = 0xf & ((0xf << 4) >> sig_bits[0]); + b |= b << 4; + sig_bits[0] = (png_byte)b; + break; + + default: + display_log(dp, LIBPNG_BUG, "invalid bit depth %d", bit_depth); + break; + } + + /* Convert bpp to bytes; this gives '1' for low-bit depth grayscale, + * where there are multiple pixels per byte. + */ + bpp = (bpp+7) >> 3; + + /* The mask can be combined with sig_bits[0] */ + if (mask != 0) + { + mask &= sig_bits[0]; + + if (bpp != 1 || mask == 0) + display_log(dp, INTERNAL_ERROR, "mask calculation error %u, %u", + bpp, mask); + } + + for (y=0; yoriginal_rows[y]; + unsigned long x; + + for (x=0; x<(width-(mask!=0)); ++x) + { + int b; + + for (b=0; b%.2x", + x, b, y, orig[-1], row[-1]); + return 0; + } + } + } + + if (mask != 0 && (*row & mask) != (*orig & mask)) + { + display_log(dp, APP_FAIL, + "significant bits at (%lu[end],%lu) changed", x, y); + return 0; + } + } /* for y */ + } + } + + return 1; /* compare succeeded */ +} + +#ifdef PNG_WRITE_SUPPORTED +static void +buffer_write(struct display *dp, struct buffer *buffer, png_bytep data, + png_size_t size) + /* Generic write function used both from the write callback provided to + * libpng and from the generic read code. + */ +{ + /* Write the data into the buffer, adding buffers as required */ + struct buffer_list *last = buffer->last; + size_t end_count = buffer->end_count; + + while (size > 0) + { + size_t avail; + + if (end_count >= sizeof last->buffer) + { + if (last->next == NULL) + { + last = buffer_extend(last); + + if (last == NULL) + display_log(dp, APP_ERROR, "out of memory saving file"); + } + + else + last = last->next; + + buffer->last = last; /* avoid the need to rewrite every time */ + end_count = 0; + } + + avail = (sizeof last->buffer) - end_count; + if (avail > size) + avail = size; + + memcpy(last->buffer + end_count, data, avail); + end_count += avail; + size -= avail; + data += avail; + } + + buffer->end_count = end_count; +} + +static void PNGCBAPI +write_function(png_structp pp, png_bytep data, png_size_t size) +{ + buffer_write(get_dp(pp), get_buffer(pp), data, size); +} + +static void +write_png(struct display *dp, png_infop ip, int transforms) +{ + display_clean_write(dp); /* safety */ + + buffer_start_write(&dp->written_file); + dp->operation = "write"; + dp->transforms = transforms; + + dp->write_pp = png_create_write_struct(PNG_LIBPNG_VER_STRING, dp, + display_error, display_warning); + + if (dp->write_pp == NULL) + display_log(dp, APP_ERROR, "failed to create write png_struct"); + + png_set_write_fn(dp->write_pp, &dp->written_file, write_function, + NULL/*flush*/); + +# ifdef PNG_SET_USER_LIMITS_SUPPORTED + /* Remove the user limits, if any */ + png_set_user_limits(dp->write_pp, 0x7fffffff, 0x7fffffff); +# endif + + /* Certain transforms require the png_info to be zapped to allow the + * transform to work correctly. + */ + if (transforms & (PNG_TRANSFORM_PACKING| + PNG_TRANSFORM_STRIP_FILLER| + PNG_TRANSFORM_STRIP_FILLER_BEFORE)) + { + int ct = dp->color_type; + + if (transforms & (PNG_TRANSFORM_STRIP_FILLER| + PNG_TRANSFORM_STRIP_FILLER_BEFORE)) + ct &= ~PNG_COLOR_MASK_ALPHA; + + png_set_IHDR(dp->write_pp, ip, dp->width, dp->height, dp->bit_depth, ct, + dp->interlace_method, dp->compression_method, dp->filter_method); + } + + png_write_png(dp->write_pp, ip, transforms, NULL/*params*/); + + /* Clean it on the way out - if control returns to the caller then the + * written_file contains the required data. + */ + display_clean_write(dp); +} +#endif /* WRITE_SUPPORTED */ + +static int +skip_transform(struct display *dp, int tr) + /* Helper to test for a bad combo and log it if it is skipped */ +{ + if ((dp->options & SKIP_BUGS) != 0 && is_bad_combo(tr)) + { + /* Log this to stdout if logging is on, otherwise just do an information + * display_log. + */ + if ((dp->options & LOG_SKIPPED) != 0) + { + printf("SKIP: %s transforms ", dp->filename); + + while (tr != 0) + { + int next = first_transform(tr); + tr &= ~next; + + printf("%s", transform_name(next)); + if (tr != 0) + putchar('+'); + } + + putchar('\n'); + } + + else + display_log(dp, INFORMATION, "%s: skipped known bad combo 0x%x", + dp->filename, tr); + + return 1; /* skip */ + } + + return 0; /* don't skip */ +} + +static void +test_one_file(struct display *dp, const char *filename) +{ + /* First cache the file and update the display original file + * information for the new file. + */ + dp->operation = "cache file"; + dp->transforms = 0; + display_cache_file(dp, filename); + update_display(dp); + + /* First test: if there are options that should be ignored for this file + * verify that they really are ignored. + */ + if (dp->ignored_transforms != 0) + { + read_png(dp, &dp->original_file, "ignored transforms", + dp->ignored_transforms); + + /* The result should be identical to the original_rows */ + if (!compare_read(dp, 0/*transforms applied*/)) + return; /* no point testing more */ + } + +#ifdef PNG_WRITE_SUPPORTED + /* Second test: write the original PNG data out to a new file (to test the + * write side) then read the result back in and make sure that it hasn't + * changed. + */ + dp->operation = "write"; + write_png(dp, dp->original_ip, 0/*transforms*/); + read_png(dp, &dp->written_file, NULL, 0/*transforms*/); + if (!compare_read(dp, 0/*transforms applied*/)) + return; +#endif + + /* Third test: the active options. Test each in turn, or, with the + * EXHAUSTIVE option, test all possible combinations. + */ + { + /* Use unsigned int here because the code below to increment through all + * the possibilities exhaustively has to use a compare and that must be + * unsigned, because some transforms are negative on a 16-bit system. + */ + unsigned int active = dp->active_transforms; + const int exhaustive = (dp->options & EXHAUSTIVE) != 0; + unsigned int current = first_transform(active); + unsigned int bad_transforms = 0; + unsigned int bad_combo = ~0U; /* bitwise AND of failing transforms */ + unsigned int bad_combo_list = 0; /* bitwise OR of failures */ + + for (;;) + { + read_png(dp, &dp->original_file, "active transforms", current); + + /* If this involved any irreversible transformations then if we write + * it out with just the reversible transformations and read it in again + * with the same transforms we should get the same thing. At present + * this isn't done - it just seems like a waste of time and it would + * require two sets of read png_struct/png_info. + * + * If there were no irreversible transformations then if we write it + * out and read it back in again (without the reversible transforms) + * we should get back to the place where we started. + */ +#ifdef PNG_WRITE_SUPPORTED + if ((current & write_transforms) == current) + { + /* All transforms reversible: write the PNG with the transformations + * reversed, then read it back in with no transformations. The + * result should be the same as the original apart from the loss of + * low order bits because of the SHIFT/sBIT transform. + */ + dp->operation = "reversible transforms"; + write_png(dp, dp->read_ip, current); + + /* And if this is read back in, because all the transformations were + * reversible, the result should be the same. + */ + read_png(dp, &dp->written_file, NULL, 0); + if (!compare_read(dp, current/*for the SHIFT/sBIT transform*/)) + { + /* This set of transforms failed. If a single bit is set - if + * there is just one transform - don't include this in further + * 'exhaustive' tests. Notice that each transform is tested on + * its own before testing combos in the exhaustive case. + */ + if (is_combo(current)) + { + bad_combo &= current; + bad_combo_list |= current; + } + + else + bad_transforms |= current; + } + } +#endif + + /* Now move to the next transform */ + if (exhaustive) /* all combinations */ + { + unsigned int next = current; + + do + { + if (next == read_transforms) /* Everything tested */ + goto combo; + + ++next; + } /* skip known bad combos if the relevant option is set; skip + * combos involving known bad single transforms in all cases. + */ + while ( (next & read_transforms) <= current + || (next & active) == 0 /* skip cases that do nothing */ + || (next & bad_transforms) != 0 + || skip_transform(dp, next)); + + assert((next & read_transforms) == next); + current = next; + } + + else /* one at a time */ + { + active &= ~current; + + if (active == 0) + goto combo; + + current = first_transform(active); + } + } + +combo: + if (dp->options & FIND_BAD_COMBOS) + { + /* bad_combos identifies the combos that occur in all failing cases; + * bad_combo_list identifies transforms that do not prevent the + * failure. + */ + if (bad_combo != ~0U) + printf("%s[0x%x]: PROBLEM: 0x%x[0x%x] ANTIDOTE: 0x%x\n", + dp->filename, active, bad_combo, bad_combo_list, + rw_transforms & ~bad_combo_list); + + else + printf("%s: no %sbad combos found\n", dp->filename, + (dp->options & SKIP_BUGS) ? "additional " : ""); + } + } +} + +static int +do_test(struct display *dp, const char *file) + /* Exists solely to isolate the setjmp clobbers */ +{ + int ret = setjmp(dp->error_return); + + if (ret == 0) + { + test_one_file(dp, file); + return 0; + } + + else if (ret < ERRORS) /* shouldn't longjmp on warnings */ + display_log(dp, INTERNAL_ERROR, "unexpected return code %d", ret); + + return ret; +} + +int +main(const int argc, const char * const * const argv) +{ + /* For each file on the command line test it with a range of transforms */ + int option_end, ilog = 0; + struct display d; + + validate_T(); + display_init(&d); + + for (option_end=1; option_end QUIET) /* abort on user or internal error */ + return 99; + } + + /* Here on any return, including failures, except user/internal issues + */ + { + const int pass = (d.options & STRICT) ? + RESULT_STRICT(d.results) : RESULT_RELAXED(d.results); + + if (!pass) + ++errors; + + if (d.options & LOG) + { + int j; + + printf("%s: pngimage ", pass ? "PASS" : "FAIL"); + + for (j=1; j +#include +#include +#include +#include +#include +#include + +#if defined(HAVE_CONFIG_H) && !defined(PNG_NO_CONFIG_H) +# include +#endif + +/* Define the following to use this test against your installed libpng, rather + * than the one being built here: + */ +#ifdef PNG_FREESTANDING_TESTS +# include +#else +# include "../../png.h" +#endif + +#ifdef PNG_SIMPLIFIED_READ_SUPPORTED /* Else nothing can be done */ +#include "../tools/sRGB.h" + +/* KNOWN ISSUES + * + * These defines switch on alternate algorithms for format conversions to match + * the current libpng implementation; they are set to allow pngstest to pass + * even though libpng is producing answers that are not as correct as they + * should be. + */ +#define ALLOW_UNUSED_GPC 0 + /* If true include unused static GPC functions and declare an external array + * of them to hide the fact that they are unused. This is for development + * use while testing the correct function to use to take into account libpng + * misbehavior, such as using a simple power law to correct sRGB to linear. + */ + +/* The following is to support direct compilation of this file as C++ */ +#ifdef __cplusplus +# define voidcast(type, value) static_cast(value) +# define aligncastconst(type, value) \ + static_cast(static_cast(value)) +#else +# define voidcast(type, value) (value) +# define aligncastconst(type, value) ((const void*)(value)) +#endif /* __cplusplus */ + +/* During parallel runs of pngstest each temporary file needs a unique name, + * this is used to permit uniqueness using a command line argument which can be + * up to 22 characters long. + */ +static char tmpf[23] = "TMP"; + +/* Generate random bytes. This uses a boring repeatable algorithm and it + * is implemented here so that it gives the same set of numbers on every + * architecture. It's a linear congruential generator (Knuth or Sedgewick + * "Algorithms") but it comes from the 'feedback taps' table in Horowitz and + * Hill, "The Art of Electronics". + */ +static void +make_random_bytes(png_uint_32* seed, void* pv, size_t size) +{ + png_uint_32 u0 = seed[0], u1 = seed[1]; + png_bytep bytes = voidcast(png_bytep, pv); + + /* There are thirty three bits, the next bit in the sequence is bit-33 XOR + * bit-20. The top 1 bit is in u1, the bottom 32 are in u0. + */ + size_t i; + for (i=0; i> (20-8)) ^ ((u1 << 7) | (u0 >> (32-7)))) & 0xff; + u1 <<= 8; + u1 |= u0 >> 24; + u0 <<= 8; + u0 |= u; + *bytes++ = (png_byte)u; + } + + seed[0] = u0; + seed[1] = u1; +} + +static void +random_color(png_colorp color) +{ + static png_uint_32 color_seed[2] = { 0x12345678, 0x9abcdef }; + make_random_bytes(color_seed, color, sizeof *color); +} + +/* Math support - neither Cygwin nor Visual Studio have C99 support and we need + * a predictable rounding function, so make one here: + */ +static double +closestinteger(double x) +{ + return floor(x + .5); +} + +/* Cast support: remove GCC whines. */ +static png_byte +u8d(double d) +{ + d = closestinteger(d); + return (png_byte)d; +} + +static png_uint_16 +u16d(double d) +{ + d = closestinteger(d); + return (png_uint_16)d; +} + +/* sRGB support: use exact calculations rounded to the nearest int, see the + * fesetround() call in main(). sRGB_to_d optimizes the 8 to 16-bit conversion. + */ +static double sRGB_to_d[256]; +static double g22_to_d[256]; + +static void +init_sRGB_to_d(void) +{ + int i; + + sRGB_to_d[0] = 0; + for (i=1; i<255; ++i) + sRGB_to_d[i] = linear_from_sRGB(i/255.); + sRGB_to_d[255] = 1; + + g22_to_d[0] = 0; + for (i=1; i<255; ++i) + g22_to_d[i] = pow(i/255., 1/.45455); + g22_to_d[255] = 1; +} + +static png_byte +sRGB(double linear /*range 0.0 .. 1.0*/) +{ + return u8d(255 * sRGB_from_linear(linear)); +} + +static png_byte +isRGB(int fixed_linear) +{ + return sRGB(fixed_linear / 65535.); +} + +#if 0 /* not used */ +static png_byte +unpremultiply(int component, int alpha) +{ + if (alpha <= component) + return 255; /* Arbitrary, but consistent with the libpng code */ + + else if (alpha >= 65535) + return isRGB(component); + + else + return sRGB((double)component / alpha); +} +#endif + +static png_uint_16 +ilinear(int fixed_srgb) +{ + return u16d(65535 * sRGB_to_d[fixed_srgb]); +} + +static png_uint_16 +ilineara(int fixed_srgb, int alpha) +{ + return u16d((257 * alpha) * sRGB_to_d[fixed_srgb]); +} + +static png_uint_16 +ilinear_g22(int fixed_srgb) +{ + return u16d(65535 * g22_to_d[fixed_srgb]); +} + +#if ALLOW_UNUSED_GPC +static png_uint_16 +ilineara_g22(int fixed_srgb, int alpha) +{ + return u16d((257 * alpha) * g22_to_d[fixed_srgb]); +} +#endif + +static double +YfromRGBint(int ir, int ig, int ib) +{ + double r = ir; + double g = ig; + double b = ib; + return YfromRGB(r, g, b); +} + +#if 0 /* unused */ +/* The error that results from using a 2.2 power law in place of the correct + * sRGB transform, given an 8-bit value which might be either sRGB or power-law. + */ +static int +power_law_error8(int value) +{ + if (value > 0 && value < 255) + { + double vd = value / 255.; + double e = fabs( + pow(sRGB_to_d[value], 1/2.2) - sRGB_from_linear(pow(vd, 2.2))); + + /* Always allow an extra 1 here for rounding errors */ + e = 1+floor(255 * e); + return (int)e; + } + + return 0; +} + +static int error_in_sRGB_roundtrip = 56; /* by experiment */ +static int +power_law_error16(int value) +{ + if (value > 0 && value < 65535) + { + /* Round trip the value through an 8-bit representation but using + * non-matching to/from conversions. + */ + double vd = value / 65535.; + double e = fabs( + pow(sRGB_from_linear(vd), 2.2) - linear_from_sRGB(pow(vd, 1/2.2))); + + /* Always allow an extra 1 here for rounding errors */ + e = error_in_sRGB_roundtrip+floor(65535 * e); + return (int)e; + } + + return 0; +} + +static int +compare_8bit(int v1, int v2, int error_limit, int multiple_algorithms) +{ + int e = abs(v1-v2); + int ev1, ev2; + + if (e <= error_limit) + return 1; + + if (!multiple_algorithms) + return 0; + + ev1 = power_law_error8(v1); + if (e <= ev1) + return 1; + + ev2 = power_law_error8(v2); + if (e <= ev2) + return 1; + + return 0; +} + +static int +compare_16bit(int v1, int v2, int error_limit, int multiple_algorithms) +{ + int e = abs(v1-v2); + int ev1, ev2; + + if (e <= error_limit) + return 1; + + /* "multiple_algorithms" in this case means that a color-map has been + * involved somewhere, so we can deduce that the values were forced to 8-bit + * (like the via_linear case for 8-bit.) + */ + if (!multiple_algorithms) + return 0; + + ev1 = power_law_error16(v1); + if (e <= ev1) + return 1; + + ev2 = power_law_error16(v2); + if (e <= ev2) + return 1; + + return 0; +} +#endif /* unused */ + +#define READ_FILE 1 /* else memory */ +#define USE_STDIO 2 /* else use file name */ +#define STRICT 4 /* fail on warnings too */ +#define VERBOSE 8 +#define KEEP_TMPFILES 16 /* else delete temporary files */ +#define KEEP_GOING 32 +#define ACCUMULATE 64 +#define FAST_WRITE 128 +#define sRGB_16BIT 256 + +static void +print_opts(png_uint_32 opts) +{ + if (opts & READ_FILE) + printf(" --file"); + if (opts & USE_STDIO) + printf(" --stdio"); + if (opts & STRICT) + printf(" --strict"); + if (opts & VERBOSE) + printf(" --verbose"); + if (opts & KEEP_TMPFILES) + printf(" --preserve"); + if (opts & KEEP_GOING) + printf(" --keep-going"); + if (opts & ACCUMULATE) + printf(" --accumulate"); + if (!(opts & FAST_WRITE)) /* --fast is currently the default */ + printf(" --slow"); + if (opts & sRGB_16BIT) + printf(" --sRGB-16bit"); +} + +#define FORMAT_NO_CHANGE 0x80000000 /* additional flag */ + +/* A name table for all the formats - defines the format of the '+' arguments to + * pngstest. + */ +#define FORMAT_COUNT 64 +#define FORMAT_MASK 0x3f +static PNG_CONST char * PNG_CONST format_names[FORMAT_COUNT] = +{ + "sRGB-gray", + "sRGB-gray+alpha", + "sRGB-rgb", + "sRGB-rgb+alpha", + "linear-gray", + "linear-gray+alpha", + "linear-rgb", + "linear-rgb+alpha", + + "color-mapped-sRGB-gray", + "color-mapped-sRGB-gray+alpha", + "color-mapped-sRGB-rgb", + "color-mapped-sRGB-rgb+alpha", + "color-mapped-linear-gray", + "color-mapped-linear-gray+alpha", + "color-mapped-linear-rgb", + "color-mapped-linear-rgb+alpha", + + "sRGB-gray", + "sRGB-gray+alpha", + "sRGB-bgr", + "sRGB-bgr+alpha", + "linear-gray", + "linear-gray+alpha", + "linear-bgr", + "linear-bgr+alpha", + + "color-mapped-sRGB-gray", + "color-mapped-sRGB-gray+alpha", + "color-mapped-sRGB-bgr", + "color-mapped-sRGB-bgr+alpha", + "color-mapped-linear-gray", + "color-mapped-linear-gray+alpha", + "color-mapped-linear-bgr", + "color-mapped-linear-bgr+alpha", + + "sRGB-gray", + "alpha+sRGB-gray", + "sRGB-rgb", + "alpha+sRGB-rgb", + "linear-gray", + "alpha+linear-gray", + "linear-rgb", + "alpha+linear-rgb", + + "color-mapped-sRGB-gray", + "color-mapped-alpha+sRGB-gray", + "color-mapped-sRGB-rgb", + "color-mapped-alpha+sRGB-rgb", + "color-mapped-linear-gray", + "color-mapped-alpha+linear-gray", + "color-mapped-linear-rgb", + "color-mapped-alpha+linear-rgb", + + "sRGB-gray", + "alpha+sRGB-gray", + "sRGB-bgr", + "alpha+sRGB-bgr", + "linear-gray", + "alpha+linear-gray", + "linear-bgr", + "alpha+linear-bgr", + + "color-mapped-sRGB-gray", + "color-mapped-alpha+sRGB-gray", + "color-mapped-sRGB-bgr", + "color-mapped-alpha+sRGB-bgr", + "color-mapped-linear-gray", + "color-mapped-alpha+linear-gray", + "color-mapped-linear-bgr", + "color-mapped-alpha+linear-bgr", +}; + +/* Decode an argument to a format number. */ +static png_uint_32 +formatof(const char *arg) +{ + char *ep; + unsigned long format = strtoul(arg, &ep, 0); + + if (ep > arg && *ep == 0 && format < FORMAT_COUNT) + return (png_uint_32)format; + + else for (format=0; format < FORMAT_COUNT; ++format) + { + if (strcmp(format_names[format], arg) == 0) + return (png_uint_32)format; + } + + fprintf(stderr, "pngstest: format name '%s' invalid\n", arg); + return FORMAT_COUNT; +} + +/* Bitset/test functions for formats */ +#define FORMAT_SET_COUNT (FORMAT_COUNT / 32) +typedef struct +{ + png_uint_32 bits[FORMAT_SET_COUNT]; +} +format_list; + +static void format_init(format_list *pf) +{ + int i; + for (i=0; ibits[i] = 0; /* All off */ +} + +#if 0 /* currently unused */ +static void format_clear(format_list *pf) +{ + int i; + for (i=0; ibits[i] = 0; +} +#endif + +static int format_is_initial(format_list *pf) +{ + int i; + for (i=0; ibits[i] != 0) + return 0; + + return 1; +} + +static int format_set(format_list *pf, png_uint_32 format) +{ + if (format < FORMAT_COUNT) + return pf->bits[format >> 5] |= ((png_uint_32)1) << (format & 31); + + return 0; +} + +#if 0 /* currently unused */ +static int format_unset(format_list *pf, png_uint_32 format) +{ + if (format < FORMAT_COUNT) + return pf->bits[format >> 5] &= ~((png_uint_32)1) << (format & 31); + + return 0; +} +#endif + +static int format_isset(format_list *pf, png_uint_32 format) +{ + return format < FORMAT_COUNT && + (pf->bits[format >> 5] & (((png_uint_32)1) << (format & 31))) != 0; +} + +static void format_default(format_list *pf, int redundant) +{ + if (redundant) + { + int i; + + /* set everything, including flags that are pointless */ + for (i=0; ibits[i] = ~(png_uint_32)0; + } + + else + { + png_uint_32 f; + + for (f=0; finput_file != NULL) + rewind(image->input_file); +} + +/* Free the image buffer; the buffer is re-used on a re-read, this is just for + * cleanup. + */ +static void +freebuffer(Image *image) +{ + if (image->buffer) free(image->buffer); + image->buffer = NULL; + image->bufsize = 0; + image->allocsize = 0; +} + +/* Delete function; cleans out all the allocated data and the temporary file in + * the image. + */ +static void +freeimage(Image *image) +{ + freebuffer(image); + png_image_free(&image->image); + + if (image->input_file != NULL) + { + fclose(image->input_file); + image->input_file = NULL; + } + + if (image->input_memory != NULL) + { + free(image->input_memory); + image->input_memory = NULL; + image->input_memory_size = 0; + } + + if (image->tmpfile_name[0] != 0 && (image->opts & KEEP_TMPFILES) == 0) + { + (void)remove(image->tmpfile_name); + image->tmpfile_name[0] = 0; + } +} + +/* This is actually a re-initializer; allows an image structure to be re-used by + * freeing everything that relates to an old image. + */ +static void initimage(Image *image, png_uint_32 opts, const char *file_name, + int stride_extra) +{ + freeimage(image); + memset(&image->image, 0, sizeof image->image); + image->opts = opts; + image->file_name = file_name; + image->stride_extra = stride_extra; +} + +/* Make sure the image buffer is big enough; allows re-use of the buffer if the + * image is re-read. + */ +#define BUFFER_INIT8 73 +static void +allocbuffer(Image *image) +{ + png_size_t size = PNG_IMAGE_BUFFER_SIZE(image->image, image->stride); + + if (size+32 > image->bufsize) + { + freebuffer(image); + image->buffer = voidcast(png_bytep, malloc(size+32)); + if (image->buffer == NULL) + { + fflush(stdout); + fprintf(stderr, + "simpletest: out of memory allocating %lu(+32) byte buffer\n", + (unsigned long)size); + exit(1); + } + image->bufsize = size+32; + } + + memset(image->buffer, 95, image->bufsize); + memset(image->buffer+16, BUFFER_INIT8, size); + image->allocsize = size; +} + +/* Make sure 16 bytes match the given byte. */ +static int +check16(png_const_bytep bp, int b) +{ + int i = 16; + + do + if (*bp != b) return 1; + while (--i); + + return 0; +} + +/* Check for overwrite in the image buffer. */ +static void +checkbuffer(Image *image, const char *arg) +{ + if (check16(image->buffer, 95)) + { + fflush(stdout); + fprintf(stderr, "%s: overwrite at start of image buffer\n", arg); + exit(1); + } + + if (check16(image->buffer+16+image->allocsize, 95)) + { + fflush(stdout); + fprintf(stderr, "%s: overwrite at end of image buffer\n", arg); + exit(1); + } +} + +/* ERROR HANDLING */ +/* Log a terminal error, also frees the libpng part of the image if necessary. + */ +static int +logerror(Image *image, const char *a1, const char *a2, const char *a3) +{ + fflush(stdout); + if (image->image.warning_or_error) + fprintf(stderr, "%s%s%s: %s\n", a1, a2, a3, image->image.message); + + else + fprintf(stderr, "%s%s%s\n", a1, a2, a3); + + if (image->image.opaque != NULL) + { + fprintf(stderr, "%s: image opaque pointer non-NULL on error\n", + image->file_name); + png_image_free(&image->image); + } + + return 0; +} + +/* Log an error and close a file (just a utility to do both things in one + * function call.) + */ +static int +logclose(Image *image, FILE *f, const char *name, const char *operation) +{ + int e = errno; + + fclose(f); + return logerror(image, name, operation, strerror(e)); +} + +/* Make sure the png_image has been freed - validates that libpng is doing what + * the spec says and freeing the image. + */ +static int +checkopaque(Image *image) +{ + if (image->image.opaque != NULL) + { + png_image_free(&image->image); + return logerror(image, image->file_name, ": opaque not NULL", ""); + } + + else if (image->image.warning_or_error != 0 && (image->opts & STRICT) != 0) + return logerror(image, image->file_name, " --strict", ""); + + else + return 1; +} + +/* IMAGE COMPARISON/CHECKING */ +/* Compare the pixels of two images, which should be the same but aren't. The + * images must have been checked for a size match. + */ +typedef struct +{ + /* The components, for grayscale images the gray value is in 'g' and if alpha + * is not present 'a' is set to 255 or 65535 according to format. + */ + int r, g, b, a; +} Pixel; + +typedef struct +{ + /* The background as the original sRGB 8-bit value converted to the final + * integer format and as a double precision linear value in the range 0..1 + * for with partially transparent pixels. + */ + int ir, ig, ib; + double dr, dg, db; /* linear r,g,b scaled to 0..1 */ +} Background; + +/* Basic image formats; control the data but not the layout thereof. */ +#define BASE_FORMATS\ + (PNG_FORMAT_FLAG_ALPHA|PNG_FORMAT_FLAG_COLOR|PNG_FORMAT_FLAG_LINEAR) + +/* Read a Pixel from a buffer. The code below stores the correct routine for + * the format in a function pointer, these are the routines: + */ +static void +gp_g8(Pixel *p, png_const_voidp pb) +{ + png_const_bytep pp = voidcast(png_const_bytep, pb); + + p->r = p->g = p->b = pp[0]; + p->a = 255; +} + +static void +gp_ga8(Pixel *p, png_const_voidp pb) +{ + png_const_bytep pp = voidcast(png_const_bytep, pb); + + p->r = p->g = p->b = pp[0]; + p->a = pp[1]; +} + +#ifdef PNG_FORMAT_AFIRST_SUPPORTED +static void +gp_ag8(Pixel *p, png_const_voidp pb) +{ + png_const_bytep pp = voidcast(png_const_bytep, pb); + + p->r = p->g = p->b = pp[1]; + p->a = pp[0]; +} +#endif + +static void +gp_rgb8(Pixel *p, png_const_voidp pb) +{ + png_const_bytep pp = voidcast(png_const_bytep, pb); + + p->r = pp[0]; + p->g = pp[1]; + p->b = pp[2]; + p->a = 255; +} + +#ifdef PNG_FORMAT_BGR_SUPPORTED +static void +gp_bgr8(Pixel *p, png_const_voidp pb) +{ + png_const_bytep pp = voidcast(png_const_bytep, pb); + + p->r = pp[2]; + p->g = pp[1]; + p->b = pp[0]; + p->a = 255; +} +#endif + +static void +gp_rgba8(Pixel *p, png_const_voidp pb) +{ + png_const_bytep pp = voidcast(png_const_bytep, pb); + + p->r = pp[0]; + p->g = pp[1]; + p->b = pp[2]; + p->a = pp[3]; +} + +#ifdef PNG_FORMAT_BGR_SUPPORTED +static void +gp_bgra8(Pixel *p, png_const_voidp pb) +{ + png_const_bytep pp = voidcast(png_const_bytep, pb); + + p->r = pp[2]; + p->g = pp[1]; + p->b = pp[0]; + p->a = pp[3]; +} +#endif + +#ifdef PNG_FORMAT_AFIRST_SUPPORTED +static void +gp_argb8(Pixel *p, png_const_voidp pb) +{ + png_const_bytep pp = voidcast(png_const_bytep, pb); + + p->r = pp[1]; + p->g = pp[2]; + p->b = pp[3]; + p->a = pp[0]; +} +#endif + +#if defined(PNG_FORMAT_AFIRST_SUPPORTED) && defined(PNG_FORMAT_BGR_SUPPORTED) +static void +gp_abgr8(Pixel *p, png_const_voidp pb) +{ + png_const_bytep pp = voidcast(png_const_bytep, pb); + + p->r = pp[3]; + p->g = pp[2]; + p->b = pp[1]; + p->a = pp[0]; +} +#endif + +static void +gp_g16(Pixel *p, png_const_voidp pb) +{ + png_const_uint_16p pp = voidcast(png_const_uint_16p, pb); + + p->r = p->g = p->b = pp[0]; + p->a = 65535; +} + +static void +gp_ga16(Pixel *p, png_const_voidp pb) +{ + png_const_uint_16p pp = voidcast(png_const_uint_16p, pb); + + p->r = p->g = p->b = pp[0]; + p->a = pp[1]; +} + +#ifdef PNG_FORMAT_AFIRST_SUPPORTED +static void +gp_ag16(Pixel *p, png_const_voidp pb) +{ + png_const_uint_16p pp = voidcast(png_const_uint_16p, pb); + + p->r = p->g = p->b = pp[1]; + p->a = pp[0]; +} +#endif + +static void +gp_rgb16(Pixel *p, png_const_voidp pb) +{ + png_const_uint_16p pp = voidcast(png_const_uint_16p, pb); + + p->r = pp[0]; + p->g = pp[1]; + p->b = pp[2]; + p->a = 65535; +} + +#ifdef PNG_FORMAT_BGR_SUPPORTED +static void +gp_bgr16(Pixel *p, png_const_voidp pb) +{ + png_const_uint_16p pp = voidcast(png_const_uint_16p, pb); + + p->r = pp[2]; + p->g = pp[1]; + p->b = pp[0]; + p->a = 65535; +} +#endif + +static void +gp_rgba16(Pixel *p, png_const_voidp pb) +{ + png_const_uint_16p pp = voidcast(png_const_uint_16p, pb); + + p->r = pp[0]; + p->g = pp[1]; + p->b = pp[2]; + p->a = pp[3]; +} + +#ifdef PNG_FORMAT_BGR_SUPPORTED +static void +gp_bgra16(Pixel *p, png_const_voidp pb) +{ + png_const_uint_16p pp = voidcast(png_const_uint_16p, pb); + + p->r = pp[2]; + p->g = pp[1]; + p->b = pp[0]; + p->a = pp[3]; +} +#endif + +#ifdef PNG_FORMAT_AFIRST_SUPPORTED +static void +gp_argb16(Pixel *p, png_const_voidp pb) +{ + png_const_uint_16p pp = voidcast(png_const_uint_16p, pb); + + p->r = pp[1]; + p->g = pp[2]; + p->b = pp[3]; + p->a = pp[0]; +} +#endif + +#if defined(PNG_FORMAT_AFIRST_SUPPORTED) && defined(PNG_FORMAT_BGR_SUPPORTED) +static void +gp_abgr16(Pixel *p, png_const_voidp pb) +{ + png_const_uint_16p pp = voidcast(png_const_uint_16p, pb); + + p->r = pp[3]; + p->g = pp[2]; + p->b = pp[1]; + p->a = pp[0]; +} +#endif + +/* Given a format, return the correct one of the above functions. */ +static void (* +get_pixel(png_uint_32 format))(Pixel *p, png_const_voidp pb) +{ + /* The color-map flag is irrelevant here - the caller of the function + * returned must either pass the buffer or, for a color-mapped image, the + * correct entry in the color-map. + */ + if (format & PNG_FORMAT_FLAG_LINEAR) + { + if (format & PNG_FORMAT_FLAG_COLOR) + { +# ifdef PNG_FORMAT_BGR_SUPPORTED + if (format & PNG_FORMAT_FLAG_BGR) + { + if (format & PNG_FORMAT_FLAG_ALPHA) + { +# ifdef PNG_FORMAT_AFIRST_SUPPORTED + if (format & PNG_FORMAT_FLAG_AFIRST) + return gp_abgr16; + + else +# endif + return gp_bgra16; + } + + else + return gp_bgr16; + } + + else +# endif + { + if (format & PNG_FORMAT_FLAG_ALPHA) + { +# ifdef PNG_FORMAT_AFIRST_SUPPORTED + if (format & PNG_FORMAT_FLAG_AFIRST) + return gp_argb16; + + else +# endif + return gp_rgba16; + } + + else + return gp_rgb16; + } + } + + else + { + if (format & PNG_FORMAT_FLAG_ALPHA) + { +# ifdef PNG_FORMAT_AFIRST_SUPPORTED + if (format & PNG_FORMAT_FLAG_AFIRST) + return gp_ag16; + + else +# endif + return gp_ga16; + } + + else + return gp_g16; + } + } + + else + { + if (format & PNG_FORMAT_FLAG_COLOR) + { +# ifdef PNG_FORMAT_BGR_SUPPORTED + if (format & PNG_FORMAT_FLAG_BGR) + { + if (format & PNG_FORMAT_FLAG_ALPHA) + { +# ifdef PNG_FORMAT_AFIRST_SUPPORTED + if (format & PNG_FORMAT_FLAG_AFIRST) + return gp_abgr8; + + else +# endif + return gp_bgra8; + } + + else + return gp_bgr8; + } + + else +# endif + { + if (format & PNG_FORMAT_FLAG_ALPHA) + { +# ifdef PNG_FORMAT_AFIRST_SUPPORTED + if (format & PNG_FORMAT_FLAG_AFIRST) + return gp_argb8; + + else +# endif + return gp_rgba8; + } + + else + return gp_rgb8; + } + } + + else + { + if (format & PNG_FORMAT_FLAG_ALPHA) + { +# ifdef PNG_FORMAT_AFIRST_SUPPORTED + if (format & PNG_FORMAT_FLAG_AFIRST) + return gp_ag8; + + else +# endif + return gp_ga8; + } + + else + return gp_g8; + } + } +} + +/* Convertion between pixel formats. The code above effectively eliminates the + * component ordering changes leaving three basic changes: + * + * 1) Remove an alpha channel by pre-multiplication or compositing on a + * background color. (Adding an alpha channel is a no-op.) + * + * 2) Remove color by mapping to grayscale. (Grayscale to color is a no-op.) + * + * 3) Convert between 8-bit and 16-bit components. (Both directtions are + * relevant.) + * + * This gives the following base format conversion matrix: + * + * OUT: ----- 8-bit ----- ----- 16-bit ----- + * IN G GA RGB RGBA G GA RGB RGBA + * 8 G . . . . lin lin lin lin + * 8 GA bckg . bckc . pre' pre pre' pre + * 8 RGB g8 g8 . . glin glin lin lin + * 8 RGBA g8b g8 bckc . gpr' gpre pre' pre + * 16 G sRGB sRGB sRGB sRGB . . . . + * 16 GA b16g unpg b16c unpc A . A . + * 16 RGB sG sG sRGB sRGB g16 g16 . . + * 16 RGBA gb16 sGp cb16 sCp g16 g16' A . + * + * 8-bit to 8-bit: + * bckg: composite on gray background + * bckc: composite on color background + * g8: convert sRGB components to sRGB grayscale + * g8b: convert sRGB components to grayscale and composite on gray background + * + * 8-bit to 16-bit: + * lin: make sRGB components linear, alpha := 65535 + * pre: make sRGB components linear and premultiply by alpha (scale alpha) + * pre': as 'pre' but alpha := 65535 + * glin: make sRGB components linear, convert to grayscale, alpha := 65535 + * gpre: make sRGB components grayscale and linear and premultiply by alpha + * gpr': as 'gpre' but alpha := 65535 + * + * 16-bit to 8-bit: + * sRGB: convert linear components to sRGB, alpha := 255 + * unpg: unpremultiply gray component and convert to sRGB (scale alpha) + * unpc: unpremultiply color components and convert to sRGB (scale alpha) + * b16g: composite linear onto gray background and convert the result to sRGB + * b16c: composite linear onto color background and convert the result to sRGB + * sG: convert linear RGB to sRGB grayscale + * sGp: unpremultiply RGB then convert to sRGB grayscale + * sCp: unpremultiply RGB then convert to sRGB + * gb16: composite linear onto background and convert to sRGB grayscale + * (order doesn't matter, the composite and grayscale operations permute) + * cb16: composite linear onto background and convert to sRGB + * + * 16-bit to 16-bit: + * A: set alpha to 65535 + * g16: convert linear RGB to linear grayscale (alpha := 65535) + * g16': as 'g16' but alpha is unchanged + */ +/* Simple copy: */ +static void +gpc_noop(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + out->r = in->r; + out->g = in->g; + out->b = in->b; + out->a = in->a; +} + +#if ALLOW_UNUSED_GPC +static void +gpc_nop8(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + if (in->a == 0) + out->r = out->g = out->b = 255; + + else + { + out->r = in->r; + out->g = in->g; + out->b = in->b; + } + + out->a = in->a; +} +#endif + +#if ALLOW_UNUSED_GPC +static void +gpc_nop6(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + if (in->a == 0) + out->r = out->g = out->b = 65535; + + else + { + out->r = in->r; + out->g = in->g; + out->b = in->b; + } + + out->a = in->a; +} +#endif + +/* 8-bit to 8-bit conversions */ +/* bckg: composite on gray background */ +static void +gpc_bckg(Pixel *out, const Pixel *in, const Background *back) +{ + if (in->a <= 0) + out->r = out->g = out->b = back->ig; + + else if (in->a >= 255) + out->r = out->g = out->b = in->g; + + else + { + double a = in->a / 255.; + + out->r = out->g = out->b = sRGB(sRGB_to_d[in->g] * a + back->dg * (1-a)); + } + + out->a = 255; +} + +/* bckc: composite on color background */ +static void +gpc_bckc(Pixel *out, const Pixel *in, const Background *back) +{ + if (in->a <= 0) + { + out->r = back->ir; + out->g = back->ig; + out->b = back->ib; + } + + else if (in->a >= 255) + { + out->r = in->r; + out->g = in->g; + out->b = in->b; + } + + else + { + double a = in->a / 255.; + + out->r = sRGB(sRGB_to_d[in->r] * a + back->dr * (1-a)); + out->g = sRGB(sRGB_to_d[in->g] * a + back->dg * (1-a)); + out->b = sRGB(sRGB_to_d[in->b] * a + back->db * (1-a)); + } + + out->a = 255; +} + +/* g8: convert sRGB components to sRGB grayscale */ +static void +gpc_g8(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + if (in->r == in->g && in->g == in->b) + out->r = out->g = out->b = in->g; + + else + out->r = out->g = out->b = + sRGB(YfromRGB(sRGB_to_d[in->r], sRGB_to_d[in->g], sRGB_to_d[in->b])); + + out->a = in->a; +} + +/* g8b: convert sRGB components to grayscale and composite on gray background */ +static void +gpc_g8b(Pixel *out, const Pixel *in, const Background *back) +{ + if (in->a <= 0) + out->r = out->g = out->b = back->ig; + + else if (in->a >= 255) + { + if (in->r == in->g && in->g == in->b) + out->r = out->g = out->b = in->g; + + else + out->r = out->g = out->b = sRGB(YfromRGB( + sRGB_to_d[in->r], sRGB_to_d[in->g], sRGB_to_d[in->b])); + } + + else + { + double a = in->a/255.; + + out->r = out->g = out->b = sRGB(a * YfromRGB(sRGB_to_d[in->r], + sRGB_to_d[in->g], sRGB_to_d[in->b]) + back->dg * (1-a)); + } + + out->a = 255; +} + +/* 8-bit to 16-bit conversions */ +/* lin: make sRGB components linear, alpha := 65535 */ +static void +gpc_lin(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + out->r = ilinear(in->r); + + if (in->g == in->r) + { + out->g = out->r; + + if (in->b == in->r) + out->b = out->r; + + else + out->b = ilinear(in->b); + } + + else + { + out->g = ilinear(in->g); + + if (in->b == in->r) + out->b = out->r; + + else if (in->b == in->g) + out->b = out->g; + + else + out->b = ilinear(in->b); + } + + out->a = 65535; +} + +/* pre: make sRGB components linear and premultiply by alpha (scale alpha) */ +static void +gpc_pre(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + out->r = ilineara(in->r, in->a); + + if (in->g == in->r) + { + out->g = out->r; + + if (in->b == in->r) + out->b = out->r; + + else + out->b = ilineara(in->b, in->a); + } + + else + { + out->g = ilineara(in->g, in->a); + + if (in->b == in->r) + out->b = out->r; + + else if (in->b == in->g) + out->b = out->g; + + else + out->b = ilineara(in->b, in->a); + } + + out->a = in->a * 257; +} + +/* pre': as 'pre' but alpha := 65535 */ +static void +gpc_preq(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + out->r = ilineara(in->r, in->a); + + if (in->g == in->r) + { + out->g = out->r; + + if (in->b == in->r) + out->b = out->r; + + else + out->b = ilineara(in->b, in->a); + } + + else + { + out->g = ilineara(in->g, in->a); + + if (in->b == in->r) + out->b = out->r; + + else if (in->b == in->g) + out->b = out->g; + + else + out->b = ilineara(in->b, in->a); + } + + out->a = 65535; +} + +/* glin: make sRGB components linear, convert to grayscale, alpha := 65535 */ +static void +gpc_glin(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + if (in->r == in->g && in->g == in->b) + out->r = out->g = out->b = ilinear(in->g); + + else + out->r = out->g = out->b = u16d(65535 * + YfromRGB(sRGB_to_d[in->r], sRGB_to_d[in->g], sRGB_to_d[in->b])); + + out->a = 65535; +} + +/* gpre: make sRGB components grayscale and linear and premultiply by alpha */ +static void +gpc_gpre(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + if (in->r == in->g && in->g == in->b) + out->r = out->g = out->b = ilineara(in->g, in->a); + + else + out->r = out->g = out->b = u16d(in->a * 257 * + YfromRGB(sRGB_to_d[in->r], sRGB_to_d[in->g], sRGB_to_d[in->b])); + + out->a = 257 * in->a; +} + +/* gpr': as 'gpre' but alpha := 65535 */ +static void +gpc_gprq(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + if (in->r == in->g && in->g == in->b) + out->r = out->g = out->b = ilineara(in->g, in->a); + + else + out->r = out->g = out->b = u16d(in->a * 257 * + YfromRGB(sRGB_to_d[in->r], sRGB_to_d[in->g], sRGB_to_d[in->b])); + + out->a = 65535; +} + +/* 8-bit to 16-bit conversions for gAMA 45455 encoded values */ +/* Lin: make gAMA 45455 components linear, alpha := 65535 */ +static void +gpc_Lin(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + out->r = ilinear_g22(in->r); + + if (in->g == in->r) + { + out->g = out->r; + + if (in->b == in->r) + out->b = out->r; + + else + out->b = ilinear_g22(in->b); + } + + else + { + out->g = ilinear_g22(in->g); + + if (in->b == in->r) + out->b = out->r; + + else if (in->b == in->g) + out->b = out->g; + + else + out->b = ilinear_g22(in->b); + } + + out->a = 65535; +} + +#if ALLOW_UNUSED_GPC +/* Pre: make gAMA 45455 components linear and premultiply by alpha (scale alpha) + */ +static void +gpc_Pre(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + out->r = ilineara_g22(in->r, in->a); + + if (in->g == in->r) + { + out->g = out->r; + + if (in->b == in->r) + out->b = out->r; + + else + out->b = ilineara_g22(in->b, in->a); + } + + else + { + out->g = ilineara_g22(in->g, in->a); + + if (in->b == in->r) + out->b = out->r; + + else if (in->b == in->g) + out->b = out->g; + + else + out->b = ilineara_g22(in->b, in->a); + } + + out->a = in->a * 257; +} +#endif + +#if ALLOW_UNUSED_GPC +/* Pre': as 'Pre' but alpha := 65535 */ +static void +gpc_Preq(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + out->r = ilineara_g22(in->r, in->a); + + if (in->g == in->r) + { + out->g = out->r; + + if (in->b == in->r) + out->b = out->r; + + else + out->b = ilineara_g22(in->b, in->a); + } + + else + { + out->g = ilineara_g22(in->g, in->a); + + if (in->b == in->r) + out->b = out->r; + + else if (in->b == in->g) + out->b = out->g; + + else + out->b = ilineara_g22(in->b, in->a); + } + + out->a = 65535; +} +#endif + +#if ALLOW_UNUSED_GPC +/* Glin: make gAMA 45455 components linear, convert to grayscale, alpha := 65535 + */ +static void +gpc_Glin(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + if (in->r == in->g && in->g == in->b) + out->r = out->g = out->b = ilinear_g22(in->g); + + else + out->r = out->g = out->b = u16d(65535 * + YfromRGB(g22_to_d[in->r], g22_to_d[in->g], g22_to_d[in->b])); + + out->a = 65535; +} +#endif + +#if ALLOW_UNUSED_GPC +/* Gpre: make gAMA 45455 components grayscale and linear and premultiply by + * alpha. + */ +static void +gpc_Gpre(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + if (in->r == in->g && in->g == in->b) + out->r = out->g = out->b = ilineara_g22(in->g, in->a); + + else + out->r = out->g = out->b = u16d(in->a * 257 * + YfromRGB(g22_to_d[in->r], g22_to_d[in->g], g22_to_d[in->b])); + + out->a = 257 * in->a; +} +#endif + +#if ALLOW_UNUSED_GPC +/* Gpr': as 'Gpre' but alpha := 65535 */ +static void +gpc_Gprq(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + if (in->r == in->g && in->g == in->b) + out->r = out->g = out->b = ilineara_g22(in->g, in->a); + + else + out->r = out->g = out->b = u16d(in->a * 257 * + YfromRGB(g22_to_d[in->r], g22_to_d[in->g], g22_to_d[in->b])); + + out->a = 65535; +} +#endif + +/* 16-bit to 8-bit conversions */ +/* sRGB: convert linear components to sRGB, alpha := 255 */ +static void +gpc_sRGB(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + out->r = isRGB(in->r); + + if (in->g == in->r) + { + out->g = out->r; + + if (in->b == in->r) + out->b = out->r; + + else + out->b = isRGB(in->b); + } + + else + { + out->g = isRGB(in->g); + + if (in->b == in->r) + out->b = out->r; + + else if (in->b == in->g) + out->b = out->g; + + else + out->b = isRGB(in->b); + } + + out->a = 255; +} + +/* unpg: unpremultiply gray component and convert to sRGB (scale alpha) */ +static void +gpc_unpg(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + if (in->a <= 128) + { + out->r = out->g = out->b = 255; + out->a = 0; + } + + else + { + out->r = out->g = out->b = sRGB((double)in->g / in->a); + out->a = u8d(in->a / 257.); + } +} + +/* unpc: unpremultiply color components and convert to sRGB (scale alpha) */ +static void +gpc_unpc(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + if (in->a <= 128) + { + out->r = out->g = out->b = 255; + out->a = 0; + } + + else + { + out->r = sRGB((double)in->r / in->a); + out->g = sRGB((double)in->g / in->a); + out->b = sRGB((double)in->b / in->a); + out->a = u8d(in->a / 257.); + } +} + +/* b16g: composite linear onto gray background and convert the result to sRGB */ +static void +gpc_b16g(Pixel *out, const Pixel *in, const Background *back) +{ + if (in->a <= 0) + out->r = out->g = out->b = back->ig; + + else + { + double a = in->a/65535.; + double a1 = 1-a; + + a /= 65535; + out->r = out->g = out->b = sRGB(in->g * a + back->dg * a1); + } + + out->a = 255; +} + +/* b16c: composite linear onto color background and convert the result to sRGB*/ +static void +gpc_b16c(Pixel *out, const Pixel *in, const Background *back) +{ + if (in->a <= 0) + { + out->r = back->ir; + out->g = back->ig; + out->b = back->ib; + } + + else + { + double a = in->a/65535.; + double a1 = 1-a; + + a /= 65535; + out->r = sRGB(in->r * a + back->dr * a1); + out->g = sRGB(in->g * a + back->dg * a1); + out->b = sRGB(in->b * a + back->db * a1); + } + + out->a = 255; +} + +/* sG: convert linear RGB to sRGB grayscale */ +static void +gpc_sG(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + out->r = out->g = out->b = sRGB(YfromRGBint(in->r, in->g, in->b)/65535); + out->a = 255; +} + +/* sGp: unpremultiply RGB then convert to sRGB grayscale */ +static void +gpc_sGp(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + if (in->a <= 128) + { + out->r = out->g = out->b = 255; + out->a = 0; + } + + else + { + out->r = out->g = out->b = sRGB(YfromRGBint(in->r, in->g, in->b)/in->a); + out->a = u8d(in->a / 257.); + } +} + +/* sCp: unpremultiply RGB then convert to sRGB */ +static void +gpc_sCp(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + + if (in->a <= 128) + { + out->r = out->g = out->b = 255; + out->a = 0; + } + + else + { + out->r = sRGB((double)in->r / in->a); + out->g = sRGB((double)in->g / in->a); + out->b = sRGB((double)in->b / in->a); + out->a = u8d(in->a / 257.); + } +} + +/* gb16: composite linear onto background and convert to sRGB grayscale */ +/* (order doesn't matter, the composite and grayscale operations permute) */ +static void +gpc_gb16(Pixel *out, const Pixel *in, const Background *back) +{ + if (in->a <= 0) + out->r = out->g = out->b = back->ig; + + else if (in->a >= 65535) + out->r = out->g = out->b = isRGB(in->g); + + else + { + double a = in->a / 65535.; + double a1 = 1-a; + + a /= 65535; + out->r = out->g = out->b = sRGB(in->g * a + back->dg * a1); + } + + out->a = 255; +} + +/* cb16: composite linear onto background and convert to sRGB */ +static void +gpc_cb16(Pixel *out, const Pixel *in, const Background *back) +{ + if (in->a <= 0) + { + out->r = back->ir; + out->g = back->ig; + out->b = back->ib; + } + + else if (in->a >= 65535) + { + out->r = isRGB(in->r); + out->g = isRGB(in->g); + out->b = isRGB(in->b); + } + + else + { + double a = in->a / 65535.; + double a1 = 1-a; + + a /= 65535; + out->r = sRGB(in->r * a + back->dr * a1); + out->g = sRGB(in->g * a + back->dg * a1); + out->b = sRGB(in->b * a + back->db * a1); + } + + out->a = 255; +} + +/* 16-bit to 16-bit conversions */ +/* A: set alpha to 65535 */ +static void +gpc_A(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + out->r = in->r; + out->g = in->g; + out->b = in->b; + out->a = 65535; +} + +/* g16: convert linear RGB to linear grayscale (alpha := 65535) */ +static void +gpc_g16(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + out->r = out->g = out->b = u16d(YfromRGBint(in->r, in->g, in->b)); + out->a = 65535; +} + +/* g16': as 'g16' but alpha is unchanged */ +static void +gpc_g16q(Pixel *out, const Pixel *in, const Background *back) +{ + (void)back; + out->r = out->g = out->b = u16d(YfromRGBint(in->r, in->g, in->b)); + out->a = in->a; +} + +#if ALLOW_UNUSED_GPC +/* Unused functions (to hide them from GCC unused function warnings) */ +void (* const gpc_unused[]) + (Pixel *out, const Pixel *in, const Background *back) = +{ + gpc_Pre, gpc_Preq, gpc_Glin, gpc_Gpre, gpc_Gprq, gpc_nop8, gpc_nop6 +}; +#endif + +/* OUT: ----- 8-bit ----- ----- 16-bit ----- + * IN G GA RGB RGBA G GA RGB RGBA + * 8 G . . . . lin lin lin lin + * 8 GA bckg . bckc . pre' pre pre' pre + * 8 RGB g8 g8 . . glin glin lin lin + * 8 RGBA g8b g8 bckc . gpr' gpre pre' pre + * 16 G sRGB sRGB sRGB sRGB . . . . + * 16 GA b16g unpg b16c unpc A . A . + * 16 RGB sG sG sRGB sRGB g16 g16 . . + * 16 RGBA gb16 sGp cb16 sCp g16 g16' A . + * + * The matrix is held in an array indexed thus: + * + * gpc_fn[out_format & BASE_FORMATS][in_format & BASE_FORMATS]; + */ +/* This will produce a compile time error if the FORMAT_FLAG values don't + * match the above matrix! + */ +#if PNG_FORMAT_FLAG_ALPHA == 1 && PNG_FORMAT_FLAG_COLOR == 2 &&\ + PNG_FORMAT_FLAG_LINEAR == 4 +static void (* const gpc_fn[8/*in*/][8/*out*/]) + (Pixel *out, const Pixel *in, const Background *back) = +{ +/*out: G-8 GA-8 RGB-8 RGBA-8 G-16 GA-16 RGB-16 RGBA-16 */ + {gpc_noop,gpc_noop,gpc_noop,gpc_noop, gpc_Lin, gpc_Lin, gpc_Lin, gpc_Lin }, + {gpc_bckg,gpc_noop,gpc_bckc,gpc_noop, gpc_preq,gpc_pre, gpc_preq,gpc_pre }, + {gpc_g8, gpc_g8, gpc_noop,gpc_noop, gpc_glin,gpc_glin,gpc_lin, gpc_lin }, + {gpc_g8b, gpc_g8, gpc_bckc,gpc_noop, gpc_gprq,gpc_gpre,gpc_preq,gpc_pre }, + {gpc_sRGB,gpc_sRGB,gpc_sRGB,gpc_sRGB, gpc_noop,gpc_noop,gpc_noop,gpc_noop}, + {gpc_b16g,gpc_unpg,gpc_b16c,gpc_unpc, gpc_A, gpc_noop,gpc_A, gpc_noop}, + {gpc_sG, gpc_sG, gpc_sRGB,gpc_sRGB, gpc_g16, gpc_g16, gpc_noop,gpc_noop}, + {gpc_gb16,gpc_sGp, gpc_cb16,gpc_sCp, gpc_g16, gpc_g16q,gpc_A, gpc_noop} +}; + +/* The array is repeated for the cases where both the input and output are color + * mapped because then different algorithms are used. + */ +static void (* const gpc_fn_colormapped[8/*in*/][8/*out*/]) + (Pixel *out, const Pixel *in, const Background *back) = +{ +/*out: G-8 GA-8 RGB-8 RGBA-8 G-16 GA-16 RGB-16 RGBA-16 */ + {gpc_noop,gpc_noop,gpc_noop,gpc_noop, gpc_lin, gpc_lin, gpc_lin, gpc_lin }, + {gpc_bckg,gpc_noop,gpc_bckc,gpc_noop, gpc_preq,gpc_pre, gpc_preq,gpc_pre }, + {gpc_g8, gpc_g8, gpc_noop,gpc_noop, gpc_glin,gpc_glin,gpc_lin, gpc_lin }, + {gpc_g8b, gpc_g8, gpc_bckc,gpc_noop, gpc_gprq,gpc_gpre,gpc_preq,gpc_pre }, + {gpc_sRGB,gpc_sRGB,gpc_sRGB,gpc_sRGB, gpc_noop,gpc_noop,gpc_noop,gpc_noop}, + {gpc_b16g,gpc_unpg,gpc_b16c,gpc_unpc, gpc_A, gpc_noop,gpc_A, gpc_noop}, + {gpc_sG, gpc_sG, gpc_sRGB,gpc_sRGB, gpc_g16, gpc_g16, gpc_noop,gpc_noop}, + {gpc_gb16,gpc_sGp, gpc_cb16,gpc_sCp, gpc_g16, gpc_g16q,gpc_A, gpc_noop} +}; + +/* The error arrays record the error in the same matrix; 64 entries, however + * the different algorithms used in libpng for colormap and direct conversions + * mean that four separate matrices are used (for each combination of + * colormapped and direct.) + * + * In some cases the conversion between sRGB formats goes via a linear + * intermediate; an sRGB to linear conversion (as above) is followed by a simple + * linear to sRGB step with no other conversions. This is done by a separate + * error array from an arbitrary 'in' format to one of the four basic outputs + * (since final output is always sRGB not colormapped). + * + * These arrays may be modified if the --accumulate flag is set during the run; + * then instead of logging errors they are simply added in. + * + * The three entries are currently for transparent, partially transparent and + * opaque input pixel values. Notice that alpha should be exact in each case. + * + * Errors in alpha should only occur when converting from a direct format + * to a colormapped format, when alpha is effectively smashed (so large + * errors can occur.) There should be no error in the '0' and 'opaque' + * values. The fourth entry in the array is used for the alpha error (and it + * should always be zero for the 'via linear' case since this is never color + * mapped.) + * + * Mapping to a colormap smashes the colors, it is necessary to have separate + * values for these cases because they are much larger; it is very much + * impossible to obtain a reasonable result, these are held in + * gpc_error_to_colormap. + */ +#if PNG_FORMAT_FLAG_COLORMAP == 8 /* extra check also required */ +# include "pngstest-errors.h" /* machine generated */ +#endif /* COLORMAP flag check */ +#endif /* flag checks */ + +typedef struct +{ + /* Basic pixel information: */ + Image* in_image; /* Input image */ + const Image* out_image; /* Output image */ + + /* 'background' is the value passed to the gpc_ routines, it may be NULL if + * it should not be used (*this* program has an error if it crashes as a + * result!) + */ + Background background_color; + const Background* background; + + /* Precalculated values: */ + int in_opaque; /* Value of input alpha that is opaque */ + int is_palette; /* Sample values come from the palette */ + int accumulate; /* Accumlate component errors (don't log) */ + int output_8bit; /* Output is 8-bit (else 16-bit) */ + + void (*in_gp)(Pixel*, png_const_voidp); + void (*out_gp)(Pixel*, png_const_voidp); + + void (*transform)(Pixel *out, const Pixel *in, const Background *back); + /* A function to perform the required transform */ + + void (*from_linear)(Pixel *out, const Pixel *in, const Background *back); + /* For 'via_linear' transforms the final, from linear, step, else NULL */ + + png_uint_16 error[4]; + /* Three error values for transparent, partially transparent and opaque + * input pixels (in turn). + */ + + png_uint_16 *error_ptr; + /* Where these are stored in the static array (for 'accumulate') */ +} +Transform; + +/* Return a 'transform' as above for the given format conversion. */ +static void +transform_from_formats(Transform *result, Image *in_image, + const Image *out_image, png_const_colorp background, int via_linear) +{ + png_uint_32 in_format, out_format; + png_uint_32 in_base, out_base; + + memset(result, 0, sizeof *result); + + /* Store the original images for error messages */ + result->in_image = in_image; + result->out_image = out_image; + + in_format = in_image->image.format; + out_format = out_image->image.format; + + if (in_format & PNG_FORMAT_FLAG_LINEAR) + result->in_opaque = 65535; + else + result->in_opaque = 255; + + result->output_8bit = (out_format & PNG_FORMAT_FLAG_LINEAR) == 0; + + result->is_palette = 0; /* set by caller if required */ + result->accumulate = (in_image->opts & ACCUMULATE) != 0; + + /* The loaders (which need the ordering information) */ + result->in_gp = get_pixel(in_format); + result->out_gp = get_pixel(out_format); + + /* Remove the ordering information: */ + in_format &= BASE_FORMATS | PNG_FORMAT_FLAG_COLORMAP; + in_base = in_format & BASE_FORMATS; + out_format &= BASE_FORMATS | PNG_FORMAT_FLAG_COLORMAP; + out_base = out_format & BASE_FORMATS; + + if (via_linear) + { + /* Check for an error in this program: */ + if (out_format & (PNG_FORMAT_FLAG_LINEAR|PNG_FORMAT_FLAG_COLORMAP)) + { + fprintf(stderr, "internal transform via linear error 0x%x->0x%x\n", + in_format, out_format); + exit(1); + } + + result->transform = gpc_fn[in_base][out_base | PNG_FORMAT_FLAG_LINEAR]; + result->from_linear = gpc_fn[out_base | PNG_FORMAT_FLAG_LINEAR][out_base]; + result->error_ptr = gpc_error_via_linear[in_format][out_format]; + } + + else if (~in_format & out_format & PNG_FORMAT_FLAG_COLORMAP) + { + /* The input is not colormapped but the output is, the errors will + * typically be large (only the grayscale-no-alpha case permits preserving + * even 8-bit values.) + */ + result->transform = gpc_fn[in_base][out_base]; + result->from_linear = NULL; + result->error_ptr = gpc_error_to_colormap[in_base][out_base]; + } + + else + { + /* The caller handles the colormap->pixel value conversion, so the + * transform function just gets a pixel value, however because libpng + * currently contains a different implementation for mapping a colormap if + * both input and output are colormapped we need different conversion + * functions to deal with errors in the libpng implementation. + */ + if (in_format & out_format & PNG_FORMAT_FLAG_COLORMAP) + result->transform = gpc_fn_colormapped[in_base][out_base]; + else + result->transform = gpc_fn[in_base][out_base]; + result->from_linear = NULL; + result->error_ptr = gpc_error[in_format][out_format]; + } + + /* Follow the libpng simplified API rules to work out what to pass to the gpc + * routines as a background value, if one is not required pass NULL so that + * this program crashes in the even of a programming error. + */ + result->background = NULL; /* default: not required */ + + /* Rule 1: background only need be supplied if alpha is to be removed */ + if (in_format & ~out_format & PNG_FORMAT_FLAG_ALPHA) + { + /* The input value is 'NULL' to use the background and (otherwise) an sRGB + * background color (to use a solid color). The code above uses a fixed + * byte value, BUFFER_INIT8, for buffer even for 16-bit output. For + * linear (16-bit) output the sRGB background color is ignored; the + * composition is always on the background (so BUFFER_INIT8 * 257), except + * that for the colormap (i.e. linear colormapped output) black is used. + */ + result->background = &result->background_color; + + if (out_format & PNG_FORMAT_FLAG_LINEAR || via_linear) + { + if (out_format & PNG_FORMAT_FLAG_COLORMAP) + { + result->background_color.ir = + result->background_color.ig = + result->background_color.ib = 0; + result->background_color.dr = + result->background_color.dg = + result->background_color.db = 0; + } + + else + { + result->background_color.ir = + result->background_color.ig = + result->background_color.ib = BUFFER_INIT8 * 257; + result->background_color.dr = + result->background_color.dg = + result->background_color.db = 0; + } + } + + else /* sRGB output */ + { + if (background != NULL) + { + if (out_format & PNG_FORMAT_FLAG_COLOR) + { + result->background_color.ir = background->red; + result->background_color.ig = background->green; + result->background_color.ib = background->blue; + /* TODO: sometimes libpng uses the power law conversion here, how + * to handle this? + */ + result->background_color.dr = sRGB_to_d[background->red]; + result->background_color.dg = sRGB_to_d[background->green]; + result->background_color.db = sRGB_to_d[background->blue]; + } + + else /* grayscale: libpng only looks at 'g' */ + { + result->background_color.ir = + result->background_color.ig = + result->background_color.ib = background->green; + /* TODO: sometimes libpng uses the power law conversion here, how + * to handle this? + */ + result->background_color.dr = + result->background_color.dg = + result->background_color.db = sRGB_to_d[background->green]; + } + } + + else if ((out_format & PNG_FORMAT_FLAG_COLORMAP) == 0) + { + result->background_color.ir = + result->background_color.ig = + result->background_color.ib = BUFFER_INIT8; + /* TODO: sometimes libpng uses the power law conversion here, how + * to handle this? + */ + result->background_color.dr = + result->background_color.dg = + result->background_color.db = sRGB_to_d[BUFFER_INIT8]; + } + + /* Else the output is colormapped and a background color must be + * provided; if pngstest crashes then that is a bug in this program + * (though libpng should png_error as well.) + */ + else + result->background = NULL; + } + } + + if (result->background == NULL) + { + result->background_color.ir = + result->background_color.ig = + result->background_color.ib = -1; /* not used */ + result->background_color.dr = + result->background_color.dg = + result->background_color.db = 1E30; /* not used */ + } + + + /* Copy the error values into the Transform: */ + result->error[0] = result->error_ptr[0]; + result->error[1] = result->error_ptr[1]; + result->error[2] = result->error_ptr[2]; + result->error[3] = result->error_ptr[3]; +} + + +/* Compare two pixels. + * + * OLD error values: +static int error_to_linear = 811; * by experiment * +static int error_to_linear_grayscale = 424; * by experiment * +static int error_to_sRGB = 6; * by experiment * +static int error_to_sRGB_grayscale = 17; * libpng error by calculation + + 2 by experiment * +static int error_in_compose = 2; * by experiment * +static int error_in_premultiply = 1; + * + * The following is *just* the result of a round trip from 8-bit sRGB to linear + * then back to 8-bit sRGB when it is done by libpng. There are two problems: + * + * 1) libpng currently uses a 2.2 power law with no linear segment, this results + * in instability in the low values and even with 16-bit precision sRGB(1) ends + * up mapping to sRGB(0) as a result of rounding in the 16-bit representation. + * This gives an error of 1 in the handling of value 1 only. + * + * 2) libpng currently uses an intermediate 8-bit linear value in gamma + * correction of 8-bit values. This results in many more errors, the worse of + * which is mapping sRGB(14) to sRGB(0). + * + * The general 'error_via_linear' is more complex because of pre-multiplication, + * this compounds the 8-bit errors according to the alpha value of the pixel. + * As a result 256 values are pre-calculated for error_via_linear. + */ +#if 0 +static int error_in_libpng_gamma; +static int error_via_linear[256]; /* Indexed by 8-bit alpha */ + +static void +init_error_via_linear(void) +{ + int alpha; + + error_via_linear[0] = 255; /* transparent pixel */ + + for (alpha=1; alpha<=255; ++alpha) + { + /* 16-bit values less than 128.5 get rounded to 8-bit 0 and so the worst + * case error arises with 16-bit 128.5, work out what sRGB + * (non-associated) value generates 128.5; any value less than this is + * going to map to 0, so the worst error is floor(value). + * + * Note that errors are considerably higher (more than a factor of 2) + * because libpng uses a simple power law for sRGB data at present. + * + * Add .1 for arithmetic errors inside libpng. + */ + double v = floor(255*pow(.5/*(128.5 * 255 / 65535)*/ / alpha, 1/2.2)+.1); + + error_via_linear[alpha] = (int)v; + } + + /* This is actually 14.99, but, despite the closeness to 15, 14 seems to work + * ok in this case. + */ + error_in_libpng_gamma = 14; +} +#endif + +static void +print_pixel(char string[64], const Pixel *pixel, png_uint_32 format) +{ + switch (format & (PNG_FORMAT_FLAG_ALPHA|PNG_FORMAT_FLAG_COLOR)) + { + case 0: + sprintf(string, "%s(%d)", format_names[format], pixel->g); + break; + + case PNG_FORMAT_FLAG_ALPHA: + sprintf(string, "%s(%d,%d)", format_names[format], pixel->g, + pixel->a); + break; + + case PNG_FORMAT_FLAG_COLOR: + sprintf(string, "%s(%d,%d,%d)", format_names[format], + pixel->r, pixel->g, pixel->b); + break; + + case PNG_FORMAT_FLAG_COLOR|PNG_FORMAT_FLAG_ALPHA: + sprintf(string, "%s(%d,%d,%d,%d)", format_names[format], + pixel->r, pixel->g, pixel->b, pixel->a); + break; + + default: + sprintf(string, "invalid-format"); + break; + } +} + +static int +logpixel(const Transform *transform, png_uint_32 x, png_uint_32 y, + const Pixel *in, const Pixel *calc, const Pixel *out, const char *reason) +{ + const png_uint_32 in_format = transform->in_image->image.format; + const png_uint_32 out_format = transform->out_image->image.format; + + png_uint_32 back_format = out_format & ~PNG_FORMAT_FLAG_ALPHA; + const char *via_linear = ""; + + char pixel_in[64], pixel_calc[64], pixel_out[64], pixel_loc[64]; + char background_info[100]; + + print_pixel(pixel_in, in, in_format); + print_pixel(pixel_calc, calc, out_format); + print_pixel(pixel_out, out, out_format); + + if (transform->is_palette) + sprintf(pixel_loc, "palette: %lu", (unsigned long)y); + else + sprintf(pixel_loc, "%lu,%lu", (unsigned long)x, (unsigned long)y); + + if (transform->from_linear != NULL) + { + via_linear = " (via linear)"; + /* And as a result the *read* format which did any background processing + * was itself linear, so the background color information is also + * linear. + */ + back_format |= PNG_FORMAT_FLAG_LINEAR; + } + + if (transform->background != NULL) + { + Pixel back; + char pixel_back[64]; + + back.r = transform->background->ir; + back.g = transform->background->ig; + back.b = transform->background->ib; + back.a = -1; /* not used */ + + print_pixel(pixel_back, &back, back_format); + sprintf(background_info, " on background %s", pixel_back); + } + + else + background_info[0] = 0; + + if (transform->in_image->file_name != transform->out_image->file_name) + { + char error_buffer[512]; + sprintf(error_buffer, + "(%s) %s error%s:\n %s%s ->\n %s\n not: %s.\n" + "Use --preserve and examine: ", pixel_loc, reason, via_linear, + pixel_in, background_info, pixel_out, pixel_calc); + return logerror(transform->in_image, transform->in_image->file_name, + error_buffer, transform->out_image->file_name); + } + + else + { + char error_buffer[512]; + sprintf(error_buffer, + "(%s) %s error%s:\n %s%s ->\n %s\n not: %s.\n" + " The error happened when reading the original file with this format.", + pixel_loc, reason, via_linear, pixel_in, background_info, pixel_out, + pixel_calc); + return logerror(transform->in_image, transform->in_image->file_name, + error_buffer, ""); + } +} + +static int +cmppixel(Transform *transform, png_const_voidp in, png_const_voidp out, + png_uint_32 x, png_uint_32 y/*or palette index*/) +{ + int maxerr; + png_const_charp errmsg; + Pixel pixel_in, pixel_calc, pixel_out; + + transform->in_gp(&pixel_in, in); + + if (transform->from_linear == NULL) + transform->transform(&pixel_calc, &pixel_in, transform->background); + + else + { + transform->transform(&pixel_out, &pixel_in, transform->background); + transform->from_linear(&pixel_calc, &pixel_out, NULL); + } + + transform->out_gp(&pixel_out, out); + + /* Eliminate the case where the input and output values match exactly. */ + if (pixel_calc.a == pixel_out.a && pixel_calc.r == pixel_out.r && + pixel_calc.g == pixel_out.g && pixel_calc.b == pixel_out.b) + return 1; + + /* Eliminate the case where the output pixel is transparent and the output + * is 8-bit - any component values are valid. Don't check the input alpha + * here to also skip the 16-bit small alpha cases. + */ + if (transform->output_8bit && pixel_calc.a == 0 && pixel_out.a == 0) + return 1; + + /* Check for alpha errors first; an alpha error can damage the components too + * so avoid spurious checks on components if one is found. + */ + errmsg = NULL; + { + int err_a = abs(pixel_calc.a-pixel_out.a); + + if (err_a > transform->error[3]) + { + /* If accumulating check the components too */ + if (transform->accumulate) + transform->error[3] = (png_uint_16)err_a; + + else + errmsg = "alpha"; + } + } + + /* Now if *either* of the output alphas are 0 but alpha is within tolerance + * eliminate the 8-bit component comparison. + */ + if (errmsg == NULL && transform->output_8bit && + (pixel_calc.a == 0 || pixel_out.a == 0)) + return 1; + + if (errmsg == NULL) /* else just signal an alpha error */ + { + int err_r = abs(pixel_calc.r - pixel_out.r); + int err_g = abs(pixel_calc.g - pixel_out.g); + int err_b = abs(pixel_calc.b - pixel_out.b); + int limit; + + if ((err_r | err_g | err_b) == 0) + return 1; /* exact match */ + + /* Mismatch on a component, check the input alpha */ + if (pixel_in.a >= transform->in_opaque) + { + errmsg = "opaque component"; + limit = 2; /* opaque */ + } + + else if (pixel_in.a > 0) + { + errmsg = "alpha component"; + limit = 1; /* partially transparent */ + } + + else + { + errmsg = "transparent component (background)"; + limit = 0; /* transparent */ + } + + maxerr = err_r; + if (maxerr < err_g) maxerr = err_g; + if (maxerr < err_b) maxerr = err_b; + + if (maxerr <= transform->error[limit]) + return 1; /* within the error limits */ + + /* Handle a component mis-match; log it, just return an error code, or + * accumulate it. + */ + if (transform->accumulate) + { + transform->error[limit] = (png_uint_16)maxerr; + return 1; /* to cause the caller to keep going */ + } + } + + /* Failure to match and not accumulating, so the error must be logged. */ + return logpixel(transform, x, y, &pixel_in, &pixel_calc, &pixel_out, errmsg); +} + +static png_byte +component_loc(png_byte loc[4], png_uint_32 format) +{ + /* Given a format return the number of channels and the location of + * each channel. + * + * The mask 'loc' contains the component offset of the channels in the + * following order. Note that if 'format' is grayscale the entries 1-3 must + * all contain the location of the gray channel. + * + * 0: alpha + * 1: red or gray + * 2: green or gray + * 3: blue or gray + */ + png_byte channels; + + if (format & PNG_FORMAT_FLAG_COLOR) + { + channels = 3; + + loc[2] = 1; + +# ifdef PNG_FORMAT_BGR_SUPPORTED + if (format & PNG_FORMAT_FLAG_BGR) + { + loc[1] = 2; + loc[3] = 0; + } + + else +# endif + { + loc[1] = 0; + loc[3] = 2; + } + } + + else + { + channels = 1; + loc[1] = loc[2] = loc[3] = 0; + } + + if (format & PNG_FORMAT_FLAG_ALPHA) + { +# ifdef PNG_FORMAT_AFIRST_SUPPORTED + if (format & PNG_FORMAT_FLAG_AFIRST) + { + loc[0] = 0; + ++loc[1]; + ++loc[2]; + ++loc[3]; + } + + else +# endif + loc[0] = channels; + + ++channels; + } + + else + loc[0] = 4; /* not present */ + + return channels; +} + +/* Compare two images, the original 'a', which was written out then read back in + * to * give image 'b'. The formats may have been changed. + */ +static int +compare_two_images(Image *a, Image *b, int via_linear, + png_const_colorp background) +{ + ptrdiff_t stridea = a->stride; + ptrdiff_t strideb = b->stride; + png_const_bytep rowa = a->buffer+16; + png_const_bytep rowb = b->buffer+16; + const png_uint_32 width = a->image.width; + const png_uint_32 height = a->image.height; + const png_uint_32 formata = a->image.format; + const png_uint_32 formatb = b->image.format; + const unsigned int a_sample = PNG_IMAGE_SAMPLE_SIZE(formata); + const unsigned int b_sample = PNG_IMAGE_SAMPLE_SIZE(formatb); + int alpha_added, alpha_removed; + int bchannels; + int btoa[4]; + png_uint_32 y; + Transform tr; + + /* This should never happen: */ + if (width != b->image.width || height != b->image.height) + return logerror(a, a->file_name, ": width x height changed: ", + b->file_name); + + /* Set up the background and the transform */ + transform_from_formats(&tr, a, b, background, via_linear); + + /* Find the first row and inter-row space. */ + if (!(formata & PNG_FORMAT_FLAG_COLORMAP) && + (formata & PNG_FORMAT_FLAG_LINEAR)) + stridea *= 2; + + if (!(formatb & PNG_FORMAT_FLAG_COLORMAP) && + (formatb & PNG_FORMAT_FLAG_LINEAR)) + strideb *= 2; + + if (stridea < 0) rowa += (height-1) * (-stridea); + if (strideb < 0) rowb += (height-1) * (-strideb); + + /* First shortcut the two colormap case by comparing the image data; if it + * matches then we expect the colormaps to match, although this is not + * absolutely necessary for an image match. If the colormaps fail to match + * then there is a problem in libpng. + */ + if (formata & formatb & PNG_FORMAT_FLAG_COLORMAP) + { + /* Only check colormap entries that actually exist; */ + png_const_bytep ppa, ppb; + int match; + png_byte in_use[256], amax = 0, bmax = 0; + + memset(in_use, 0, sizeof in_use); + + ppa = rowa; + ppb = rowb; + + /* Do this the slow way to accumulate the 'in_use' flags, don't break out + * of the loop until the end; this validates the color-mapped data to + * ensure all pixels are valid color-map indexes. + */ + for (y=0, match=1; y bmax) + bmax = bval; + + if (bval != aval) + match = 0; + + in_use[aval] = 1; + if (aval > amax) + amax = aval; + } + } + + /* If the buffers match then the colormaps must too. */ + if (match) + { + /* Do the color-maps match, entry by entry? Only check the 'in_use' + * entries. An error here should be logged as a color-map error. + */ + png_const_bytep a_cmap = (png_const_bytep)a->colormap; + png_const_bytep b_cmap = (png_const_bytep)b->colormap; + int result = 1; /* match by default */ + + /* This is used in logpixel to get the error message correct. */ + tr.is_palette = 1; + + for (y=0; y<256; ++y, a_cmap += a_sample, b_cmap += b_sample) + if (in_use[y]) + { + /* The colormap entries should be valid, but because libpng doesn't + * do any checking at present the original image may contain invalid + * pixel values. These cause an error here (at present) unless + * accumulating errors in which case the program just ignores them. + */ + if (y >= a->image.colormap_entries) + { + if ((a->opts & ACCUMULATE) == 0) + { + char pindex[9]; + sprintf(pindex, "%lu[%lu]", (unsigned long)y, + (unsigned long)a->image.colormap_entries); + logerror(a, a->file_name, ": bad pixel index: ", pindex); + } + result = 0; + } + + else if (y >= b->image.colormap_entries) + { + if ((b->opts & ACCUMULATE) == 0) + { + char pindex[9]; + sprintf(pindex, "%lu[%lu]", (unsigned long)y, + (unsigned long)b->image.colormap_entries); + logerror(b, b->file_name, ": bad pixel index: ", pindex); + } + result = 0; + } + + /* All the mismatches are logged here; there can only be 256! */ + else if (!cmppixel(&tr, a_cmap, b_cmap, 0, y)) + result = 0; + } + + /* If reqested copy the error values back from the Transform. */ + if (a->opts & ACCUMULATE) + { + tr.error_ptr[0] = tr.error[0]; + tr.error_ptr[1] = tr.error[1]; + tr.error_ptr[2] = tr.error[2]; + tr.error_ptr[3] = tr.error[3]; + result = 1; /* force a continue */ + } + + return result; + } + + /* else the image buffers don't match pixel-wise so compare sample values + * instead, but first validate that the pixel indexes are in range (but + * only if not accumulating, when the error is ignored.) + */ + else if ((a->opts & ACCUMULATE) == 0) + { + /* Check the original image first, + * TODO: deal with input images with bad pixel values? + */ + if (amax >= a->image.colormap_entries) + { + char pindex[9]; + sprintf(pindex, "%d[%lu]", amax, + (unsigned long)a->image.colormap_entries); + return logerror(a, a->file_name, ": bad pixel index: ", pindex); + } + + else if (bmax >= b->image.colormap_entries) + { + char pindex[9]; + sprintf(pindex, "%d[%lu]", bmax, + (unsigned long)b->image.colormap_entries); + return logerror(b, b->file_name, ": bad pixel index: ", pindex); + } + } + } + + /* We can directly compare pixel values without the need to use the read + * or transform support (i.e. a memory compare) if: + * + * 1) The bit depth has not changed. + * 2) RGB to grayscale has not been done (the reverse is ok; we just compare + * the three RGB values to the original grayscale.) + * 3) An alpha channel has not been removed from an 8-bit format, or the + * 8-bit alpha value of the pixel was 255 (opaque). + * + * If an alpha channel has been *added* then it must have the relevant opaque + * value (255 or 65535). + * + * The fist two the tests (in the order given above) (using the boolean + * equivalence !a && !b == !(a || b)) + */ + if (!(((formata ^ formatb) & PNG_FORMAT_FLAG_LINEAR) | + (formata & (formatb ^ PNG_FORMAT_FLAG_COLOR) & PNG_FORMAT_FLAG_COLOR))) + { + /* Was an alpha channel changed? */ + const png_uint_32 alpha_changed = (formata ^ formatb) & + PNG_FORMAT_FLAG_ALPHA; + + /* Was an alpha channel removed? (The third test.) If so the direct + * comparison is only possible if the input alpha is opaque. + */ + alpha_removed = (formata & alpha_changed) != 0; + + /* Was an alpha channel added? */ + alpha_added = (formatb & alpha_changed) != 0; + + /* The channels may have been moved between input and output, this finds + * out how, recording the result in the btoa array, which says where in + * 'a' to find each channel of 'b'. If alpha was added then btoa[alpha] + * ends up as 4 (and is not used.) + */ + { + int i; + png_byte aloc[4]; + png_byte bloc[4]; + + /* The following are used only if the formats match, except that + * 'bchannels' is a flag for matching formats. btoa[x] says, for each + * channel in b, where to find the corresponding value in a, for the + * bchannels. achannels may be different for a gray to rgb transform + * (a will be 1 or 2, b will be 3 or 4 channels.) + */ + (void)component_loc(aloc, formata); + bchannels = component_loc(bloc, formatb); + + /* Hence the btoa array. */ + for (i=0; i<4; ++i) if (bloc[i] < 4) + btoa[bloc[i]] = aloc[i]; /* may be '4' for alpha */ + + if (alpha_added) + alpha_added = bloc[0]; /* location of alpha channel in image b */ + + else + alpha_added = 4; /* Won't match an image b channel */ + + if (alpha_removed) + alpha_removed = aloc[0]; /* location of alpha channel in image a */ + + else + alpha_removed = 4; + } + } + + else + { + /* Direct compare is not possible, cancel out all the corresponding local + * variables. + */ + bchannels = 0; + alpha_removed = alpha_added = 4; + btoa[3] = btoa[2] = btoa[1] = btoa[0] = 4; /* 4 == not present */ + } + + for (y=0; ycolormap + a_sample * *ppa++; + else + psa = ppa, ppa += a_sample; + + if (formatb & PNG_FORMAT_FLAG_COLORMAP) + psb = (png_const_bytep)b->colormap + b_sample * *ppb++; + else + psb = ppb, ppb += b_sample; + + /* Do the fast test if possible. */ + if (bchannels) + { + /* Check each 'b' channel against either the corresponding 'a' + * channel or the opaque alpha value, as appropriate. If + * alpha_removed value is set (not 4) then also do this only if the + * 'a' alpha channel (alpha_removed) is opaque; only relevant for + * the 8-bit case. + */ + if (formatb & PNG_FORMAT_FLAG_LINEAR) /* 16-bit checks */ + { + png_const_uint_16p pua = aligncastconst(png_const_uint_16p, psa); + png_const_uint_16p pub = aligncastconst(png_const_uint_16p, psb); + + switch (bchannels) + { + case 4: + if (pua[btoa[3]] != pub[3]) break; + case 3: + if (pua[btoa[2]] != pub[2]) break; + case 2: + if (pua[btoa[1]] != pub[1]) break; + case 1: + if (pua[btoa[0]] != pub[0]) break; + if (alpha_added != 4 && pub[alpha_added] != 65535) break; + continue; /* x loop */ + default: + break; /* impossible */ + } + } + + else if (alpha_removed == 4 || psa[alpha_removed] == 255) + { + switch (bchannels) + { + case 4: + if (psa[btoa[3]] != psb[3]) break; + case 3: + if (psa[btoa[2]] != psb[2]) break; + case 2: + if (psa[btoa[1]] != psb[1]) break; + case 1: + if (psa[btoa[0]] != psb[0]) break; + if (alpha_added != 4 && psb[alpha_added] != 255) break; + continue; /* x loop */ + default: + break; /* impossible */ + } + } + } + + /* If we get to here the fast match failed; do the slow match for this + * pixel. + */ + if (!cmppixel(&tr, psa, psb, x, y) && (a->opts & KEEP_GOING) == 0) + return 0; /* error case */ + } + } + + /* If reqested copy the error values back from the Transform. */ + if (a->opts & ACCUMULATE) + { + tr.error_ptr[0] = tr.error[0]; + tr.error_ptr[1] = tr.error[1]; + tr.error_ptr[2] = tr.error[2]; + tr.error_ptr[3] = tr.error[3]; + } + + return 1; +} + +/* Read the file; how the read gets done depends on which of input_file and + * input_memory have been set. + */ +static int +read_file(Image *image, png_uint_32 format, png_const_colorp background) +{ + memset(&image->image, 0, sizeof image->image); + image->image.version = PNG_IMAGE_VERSION; + + if (image->input_memory != NULL) + { + if (!png_image_begin_read_from_memory(&image->image, image->input_memory, + image->input_memory_size)) + return logerror(image, "memory init: ", image->file_name, ""); + } + +# ifdef PNG_STDIO_SUPPORTED + else if (image->input_file != NULL) + { + if (!png_image_begin_read_from_stdio(&image->image, image->input_file)) + return logerror(image, "stdio init: ", image->file_name, ""); + } + + else + { + if (!png_image_begin_read_from_file(&image->image, image->file_name)) + return logerror(image, "file init: ", image->file_name, ""); + } +# else + else + { + return logerror(image, "unsupported file/stdio init: ", + image->file_name, ""); + } +# endif + + /* This must be set after the begin_read call: */ + if (image->opts & sRGB_16BIT) + image->image.flags |= PNG_IMAGE_FLAG_16BIT_sRGB; + + /* Have an initialized image with all the data we need plus, maybe, an + * allocated file (myfile) or buffer (mybuffer) that need to be freed. + */ + { + int result; + png_uint_32 image_format; + + /* Print both original and output formats. */ + image_format = image->image.format; + + if (image->opts & VERBOSE) + { + printf("%s %lu x %lu %s -> %s", image->file_name, + (unsigned long)image->image.width, + (unsigned long)image->image.height, + format_names[image_format & FORMAT_MASK], + (format & FORMAT_NO_CHANGE) != 0 || image->image.format == format + ? "no change" : format_names[format & FORMAT_MASK]); + + if (background != NULL) + printf(" background(%d,%d,%d)\n", background->red, + background->green, background->blue); + else + printf("\n"); + + fflush(stdout); + } + + /* 'NO_CHANGE' combined with the color-map flag forces the base format + * flags to be set on read to ensure that the original representation is + * not lost in the pass through a colormap format. + */ + if ((format & FORMAT_NO_CHANGE) != 0) + { + if ((format & PNG_FORMAT_FLAG_COLORMAP) != 0 && + (image_format & PNG_FORMAT_FLAG_COLORMAP) != 0) + format = (image_format & ~BASE_FORMATS) | (format & BASE_FORMATS); + + else + format = image_format; + } + + image->image.format = format; + + image->stride = PNG_IMAGE_ROW_STRIDE(image->image) + image->stride_extra; + allocbuffer(image); + + result = png_image_finish_read(&image->image, background, + image->buffer+16, (png_int_32)image->stride, image->colormap); + + checkbuffer(image, image->file_name); + + if (result) + return checkopaque(image); + + else + return logerror(image, image->file_name, ": image read failed", ""); + } +} + +/* Reads from a filename, which must be in image->file_name, but uses + * image->opts to choose the method. The file is always read in its native + * format (the one the simplified API suggests). + */ +static int +read_one_file(Image *image) +{ + if (!(image->opts & READ_FILE) || (image->opts & USE_STDIO)) + { + /* memory or stdio. */ + FILE *f = fopen(image->file_name, "rb"); + + if (f != NULL) + { + if (image->opts & READ_FILE) + image->input_file = f; + + else /* memory */ + { + if (fseek(f, 0, SEEK_END) == 0) + { + long int cb = ftell(f); + + if (cb > 0) + { +#ifndef __COVERITY__ + if ((unsigned long int)cb <= (size_t)~(size_t)0) +#endif + { + png_bytep b = voidcast(png_bytep, malloc((size_t)cb)); + + if (b != NULL) + { + rewind(f); + + if (fread(b, (size_t)cb, 1, f) == 1) + { + fclose(f); + image->input_memory_size = cb; + image->input_memory = b; + } + + else + { + free(b); + return logclose(image, f, image->file_name, + ": read failed: "); + } + } + + else + return logclose(image, f, image->file_name, + ": out of memory: "); + } + + else + return logclose(image, f, image->file_name, + ": file too big for this architecture: "); + /* cb is the length of the file as a (long) and + * this is greater than the maximum amount of + * memory that can be requested from malloc. + */ + } + + else if (cb == 0) + return logclose(image, f, image->file_name, + ": zero length: "); + + else + return logclose(image, f, image->file_name, + ": tell failed: "); + } + + else + return logclose(image, f, image->file_name, ": seek failed: "); + } + } + + else + return logerror(image, image->file_name, ": open failed: ", + strerror(errno)); + } + + return read_file(image, FORMAT_NO_CHANGE, NULL); +} + +#ifdef PNG_SIMPLIFIED_WRITE_SUPPORTED +static int +write_one_file(Image *output, Image *image, int convert_to_8bit) +{ + if (image->opts & FAST_WRITE) + image->image.flags |= PNG_IMAGE_FLAG_FAST; + + if (image->opts & USE_STDIO) + { +#ifndef PNG_USE_MKSTEMP + FILE *f = tmpfile(); +#else + /* Experimental. Coverity says tmpfile() is insecure because it + * generates predictable names. + * + * It is possible to satisfy Coverity by using mkstemp(); however, + * any platform supporting mkstemp() undoubtedly has a secure tmpfile() + * implementation as well, and doesn't need the fix. Note that + * the fix won't work on platforms that don't support mkstemp(). + * + * https://www.securecoding.cert.org/confluence/display/c/ + * FIO21-C.+Do+not+create+temporary+files+in+shared+directories + * says that most historic implementations of tmpfile() provide + * only a limited number of possible temporary file names + * (usually 26) before file names are recycled. That article also + * provides a secure solution that unfortunately depends upon mkstemp(). + */ + char tmpfile[] = "pngstest-XXXXXX"; + int filedes; + FILE *f; + umask(0177); + filedes = mkstemp(tmpfile); + if (filedes < 0) + f = NULL; + else + { + f = fdopen(filedes,"w+"); + /* Hide the filename immediately and ensure that the file does + * not exist after the program ends + */ + (void) unlink(tmpfile); + } +#endif + + if (f != NULL) + { + if (png_image_write_to_stdio(&image->image, f, convert_to_8bit, + image->buffer+16, (png_int_32)image->stride, image->colormap)) + { + if (fflush(f) == 0) + { + rewind(f); + initimage(output, image->opts, "tmpfile", image->stride_extra); + output->input_file = f; + if (!checkopaque(image)) + return 0; + } + + else + return logclose(image, f, "tmpfile", ": flush: "); + } + + else + { + fclose(f); + return logerror(image, "tmpfile", ": write failed", ""); + } + } + + else + return logerror(image, "tmpfile", ": open: ", strerror(errno)); + } + + else + { + static int counter = 0; + char name[32]; + + sprintf(name, "%s%d.png", tmpf, ++counter); + + if (png_image_write_to_file(&image->image, name, convert_to_8bit, + image->buffer+16, (png_int_32)image->stride, image->colormap)) + { + initimage(output, image->opts, output->tmpfile_name, + image->stride_extra); + /* Afterwards, or freeimage will delete it! */ + strcpy(output->tmpfile_name, name); + + if (!checkopaque(image)) + return 0; + } + + else + return logerror(image, name, ": write failed", ""); + } + + /* 'output' has an initialized temporary image, read this back in and compare + * this against the original: there should be no change since the original + * format was written unmodified unless 'convert_to_8bit' was specified. + * However, if the original image was color-mapped, a simple read will zap + * the linear, color and maybe alpha flags, this will cause spurious failures + * under some circumstances. + */ + if (read_file(output, image->image.format | FORMAT_NO_CHANGE, NULL)) + { + png_uint_32 original_format = image->image.format; + + if (convert_to_8bit) + original_format &= ~PNG_FORMAT_FLAG_LINEAR; + + if ((output->image.format & BASE_FORMATS) != + (original_format & BASE_FORMATS)) + return logerror(image, image->file_name, ": format changed on read: ", + output->file_name); + + return compare_two_images(image, output, 0/*via linear*/, NULL); + } + + else + return logerror(output, output->tmpfile_name, + ": read of new file failed", ""); +} +#endif + +static int +testimage(Image *image, png_uint_32 opts, format_list *pf) +{ + int result; + Image copy; + + /* Copy the original data, stealing it from 'image' */ + checkopaque(image); + copy = *image; + + copy.opts = opts; + copy.buffer = NULL; + copy.bufsize = 0; + copy.allocsize = 0; + + image->input_file = NULL; + image->input_memory = NULL; + image->input_memory_size = 0; + image->tmpfile_name[0] = 0; + + { + png_uint_32 counter; + Image output; + + newimage(&output); + + result = 1; + + /* Use the low bit of 'counter' to indicate whether or not to do alpha + * removal with a background color or by composting onto the image; this + * step gets skipped if it isn't relevant + */ + for (counter=0; counter<2*FORMAT_COUNT; ++counter) + if (format_isset(pf, counter >> 1)) + { + png_uint_32 format = counter >> 1; + + png_color background_color; + png_colorp background = NULL; + + /* If there is a format change that removes the alpha channel then + * the background is relevant. If the output is 8-bit color-mapped + * then a background color *must* be provided, otherwise there are + * two tests to do - one with a color, the other with NULL. The + * NULL test happens second. + */ + if ((counter & 1) == 0) + { + if ((format & PNG_FORMAT_FLAG_ALPHA) == 0 && + (image->image.format & PNG_FORMAT_FLAG_ALPHA) != 0) + { + /* Alpha/transparency will be removed, the background is + * relevant: make it a color the first time + */ + random_color(&background_color); + background = &background_color; + + /* BUT if the output is to a color-mapped 8-bit format then + * the background must always be a color, so increment 'counter' + * to skip the NULL test. + */ + if ((format & PNG_FORMAT_FLAG_COLORMAP) != 0 && + (format & PNG_FORMAT_FLAG_LINEAR) == 0) + ++counter; + } + + /* Otherwise an alpha channel is not being eliminated, just leave + * background NULL and skip the (counter & 1) NULL test. + */ + else + ++counter; + } + /* else just use NULL for background */ + + resetimage(©); + copy.opts = opts; /* in case read_file needs to change it */ + + result = read_file(©, format, background); + if (!result) + break; + + /* Make sure the file just read matches the original file. */ + result = compare_two_images(image, ©, 0/*via linear*/, background); + if (!result) + break; + +# ifdef PNG_SIMPLIFIED_WRITE_SUPPORTED + /* Write the *copy* just made to a new file to make sure the write + * side works ok. Check the conversion to sRGB if the copy is + * linear. + */ + output.opts = opts; + result = write_one_file(&output, ©, 0/*convert to 8bit*/); + if (!result) + break; + + /* Validate against the original too; the background is needed here + * as well so that compare_two_images knows what color was used. + */ + result = compare_two_images(image, &output, 0, background); + if (!result) + break; + + if ((format & PNG_FORMAT_FLAG_LINEAR) != 0 && + (format & PNG_FORMAT_FLAG_COLORMAP) == 0) + { + /* 'output' is linear, convert to the corresponding sRGB format. + */ + output.opts = opts; + result = write_one_file(&output, ©, 1/*convert to 8bit*/); + if (!result) + break; + + /* This may involve a conversion via linear; in the ideal world + * this would round-trip correctly, but libpng 1.5.7 is not the + * ideal world so allow a drift (error_via_linear). + * + * 'image' has an alpha channel but 'output' does not then there + * will a strip-alpha-channel operation (because 'output' is + * linear), handle this by composing on black when doing the + * comparison. + */ + result = compare_two_images(image, &output, 1/*via_linear*/, + background); + if (!result) + break; + } +# endif /* PNG_SIMPLIFIED_WRITE_SUPPORTED */ + } + + freeimage(&output); + } + + freeimage(©); + + return result; +} + +static int +test_one_file(const char *file_name, format_list *formats, png_uint_32 opts, + int stride_extra, int log_pass) +{ + int result; + Image image; + + newimage(&image); + initimage(&image, opts, file_name, stride_extra); + result = read_one_file(&image); + if (result) + result = testimage(&image, opts, formats); + freeimage(&image); + + /* Ensure that stderr is flushed into any log file */ + fflush(stderr); + + if (log_pass) + { + if (result) + printf("PASS:"); + + else + printf("FAIL:"); + +# ifndef PNG_SIMPLIFIED_WRITE_SUPPORTED + printf(" (no write)"); +# endif + + print_opts(opts); + printf(" %s\n", file_name); + /* stdout may not be line-buffered if it is piped to a file, so: */ + fflush(stdout); + } + + else if (!result) + exit(1); + + return result; +} + +int +main(int argc, char **argv) +{ + png_uint_32 opts = FAST_WRITE; + format_list formats; + const char *touch = NULL; + int log_pass = 0; + int redundant = 0; + int stride_extra = 0; + int retval = 0; + int c; + + init_sRGB_to_d(); +#if 0 + init_error_via_linear(); +#endif + format_init(&formats); + + for (c=1; c= sizeof tmpf) + { + fflush(stdout); + fprintf(stderr, "%s: %s is too long for a temp file prefix\n", + argv[0], argv[c]); + exit(99); + } + + /* Safe: checked above */ + strncpy(tmpf, argv[c], sizeof (tmpf)-1); + } + + else + { + fflush(stdout); + fprintf(stderr, "%s: %s requires a temporary file prefix\n", + argv[0], arg); + exit(99); + } + } + else if (strcmp(arg, "--touch") == 0) + { + if (c+1 < argc) + touch = argv[++c]; + + else + { + fflush(stdout); + fprintf(stderr, "%s: %s requires a file name argument\n", + argv[0], arg); + exit(99); + } + } + else if (arg[0] == '+') + { + png_uint_32 format = formatof(arg+1); + + if (format > FORMAT_COUNT) + exit(99); + + format_set(&formats, format); + } + else if (arg[0] == '-' && arg[1] != 0 && (arg[1] != '0' || arg[2] != 0)) + { + fflush(stdout); + fprintf(stderr, "%s: unknown option: %s\n", argv[0], arg); + exit(99); + } + else + { + if (format_is_initial(&formats)) + format_default(&formats, redundant); + + if (arg[0] == '-') + { + const int term = (arg[1] == '0' ? 0 : '\n'); + unsigned int ich = 0; + + /* Loop reading files, use a static buffer to simplify this and just + * stop if the name gets to long. + */ + static char buffer[4096]; + + do + { + int ch = getchar(); + + /* Don't allow '\0' in file names, and terminate with '\n' or, + * for -0, just '\0' (use -print0 to find to make this work!) + */ + if (ch == EOF || ch == term || ch == 0) + { + buffer[ich] = 0; + + if (ich > 0 && !test_one_file(buffer, &formats, opts, + stride_extra, log_pass)) + retval = 1; + + if (ch == EOF) + break; + + ich = 0; + --ich; /* so that the increment below sets it to 0 again */ + } + + else + buffer[ich] = (char)ch; + } while (++ich < sizeof buffer); + + if (ich) + { + buffer[32] = 0; + buffer[4095] = 0; + fprintf(stderr, "%s...%s: file name too long\n", buffer, + buffer+(4096-32)); + exit(99); + } + } + + else if (!test_one_file(arg, &formats, opts, stride_extra, log_pass)) + retval = 1; + } + } + + if (opts & ACCUMULATE) + { + unsigned int in; + + printf("/* contrib/libtests/pngstest-errors.h\n"); + printf(" *\n"); + printf(" * BUILT USING:" PNG_HEADER_VERSION_STRING); + printf(" *\n"); + printf(" * This code is released under the libpng license.\n"); + printf(" * For conditions of distribution and use, see the disclaimer\n"); + printf(" * and license in png.h\n"); + printf(" *\n"); + printf(" * THIS IS A MACHINE GENERATED FILE: do not edit it directly!\n"); + printf(" * Instead run:\n"); + printf(" *\n"); + printf(" * pngstest --accumulate\n"); + printf(" *\n"); + printf(" * on as many PNG files as possible; at least PNGSuite and\n"); + printf(" * contrib/libtests/testpngs.\n"); + printf(" */\n"); + + printf("static png_uint_16 gpc_error[16/*in*/][16/*out*/][4/*a*/] =\n"); + printf("{\n"); + for (in=0; in<16; ++in) + { + unsigned int out; + printf(" { /* input: %s */\n ", format_names[in]); + for (out=0; out<16; ++out) + { + unsigned int alpha; + printf(" {"); + for (alpha=0; alpha<4; ++alpha) + { + printf(" %d", gpc_error[in][out][alpha]); + if (alpha < 3) putchar(','); + } + printf(" }"); + if (out < 15) + { + putchar(','); + if (out % 4 == 3) printf("\n "); + } + } + printf("\n }"); + + if (in < 15) + putchar(','); + else + putchar('\n'); + } + printf("};\n"); + + printf("static png_uint_16 gpc_error_via_linear[16][4/*out*/][4] =\n"); + printf("{\n"); + for (in=0; in<16; ++in) + { + unsigned int out; + printf(" { /* input: %s */\n ", format_names[in]); + for (out=0; out<4; ++out) + { + unsigned int alpha; + printf(" {"); + for (alpha=0; alpha<4; ++alpha) + { + printf(" %d", gpc_error_via_linear[in][out][alpha]); + if (alpha < 3) putchar(','); + } + printf(" }"); + if (out < 3) + putchar(','); + } + printf("\n }"); + + if (in < 15) + putchar(','); + else + putchar('\n'); + } + printf("};\n"); + + printf("static png_uint_16 gpc_error_to_colormap[8/*i*/][8/*o*/][4] =\n"); + printf("{\n"); + for (in=0; in<8; ++in) + { + unsigned int out; + printf(" { /* input: %s */\n ", format_names[in]); + for (out=0; out<8; ++out) + { + unsigned int alpha; + printf(" {"); + for (alpha=0; alpha<4; ++alpha) + { + printf(" %d", gpc_error_to_colormap[in][out][alpha]); + if (alpha < 3) putchar(','); + } + printf(" }"); + if (out < 7) + { + putchar(','); + if (out % 4 == 3) printf("\n "); + } + } + printf("\n }"); + + if (in < 7) + putchar(','); + else + putchar('\n'); + } + printf("};\n"); + printf("/* END MACHINE GENERATED */\n"); + } + + if (retval == 0 && touch != NULL) + { + FILE *fsuccess = fopen(touch, "wt"); + + if (fsuccess != NULL) + { + int error = 0; + fprintf(fsuccess, "PNG simple API tests succeeded\n"); + fflush(fsuccess); + error = ferror(fsuccess); + + if (fclose(fsuccess) || error) + { + fflush(stdout); + fprintf(stderr, "%s: write failed\n", touch); + exit(99); + } + } + + else + { + fflush(stdout); + fprintf(stderr, "%s: open failed\n", touch); + exit(99); + } + } + + return retval; +} + +#else /* !PNG_SIMPLIFIED_READ_SUPPORTED */ +int main(void) +{ + fprintf(stderr, "pngstest: no read support in libpng, test skipped\n"); + /* So the test is skipped: */ + return 77; +} +#endif /* PNG_SIMPLIFIED_READ_SUPPORTED */ diff --git a/compat/libpng/contrib/libtests/pngunknown.c b/compat/libpng/contrib/libtests/pngunknown.c new file mode 100755 index 0000000..0d52ff8 --- /dev/null +++ b/compat/libpng/contrib/libtests/pngunknown.c @@ -0,0 +1,1261 @@ + +/* pngunknown.c - test the read side unknown chunk handling + * + * Last changed in libpng 1.6.10 [March 6, 2014] + * Copyright (c) 2014 Glenn Randers-Pehrson + * Written by John Cunningham Bowler + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + * NOTES: + * This is a C program that is intended to be linked against libpng. It + * allows the libpng unknown handling code to be tested by interpreting + * arguments to save or discard combinations of chunks. The program is + * currently just a minimal validation for the built-in libpng facilities. + */ + +#include +#include +#include +#include + +/* Define the following to use this test against your installed libpng, rather + * than the one being built here: + */ +#ifdef PNG_FREESTANDING_TESTS +# include +#else +# include "../../png.h" +#endif + +/* Since this program tests the ability to change the unknown chunk handling + * these must be defined: + */ +#if defined(PNG_SET_UNKNOWN_CHUNKS_SUPPORTED) &&\ + defined(PNG_READ_SUPPORTED) + +/* One of these must be defined to allow us to find out what happened. It is + * still useful to set unknown chunk handling without either of these in order + * to cause *known* chunks to be discarded. This can be a significant + * efficiency gain, but it can't really be tested here. + */ +#if defined(PNG_READ_USER_CHUNKS_SUPPORTED) ||\ + defined(PNG_SAVE_UNKNOWN_CHUNKS_SUPPORTED) + +#if PNG_LIBPNG_VER < 10500 +/* This deliberately lacks the PNG_CONST. */ +typedef png_byte *png_const_bytep; + +/* This is copied from 1.5.1 png.h: */ +#define PNG_INTERLACE_ADAM7_PASSES 7 +#define PNG_PASS_START_ROW(pass) (((1U&~(pass))<<(3-((pass)>>1)))&7) +#define PNG_PASS_START_COL(pass) (((1U& (pass))<<(3-(((pass)+1)>>1)))&7) +#define PNG_PASS_ROW_SHIFT(pass) ((pass)>2?(8-(pass))>>1:3) +#define PNG_PASS_COL_SHIFT(pass) ((pass)>1?(7-(pass))>>1:3) +#define PNG_PASS_ROWS(height, pass) (((height)+(((1<>PNG_PASS_ROW_SHIFT(pass)) +#define PNG_PASS_COLS(width, pass) (((width)+(((1<>PNG_PASS_COL_SHIFT(pass)) +#define PNG_ROW_FROM_PASS_ROW(yIn, pass) \ + (((yIn)<>(((7-(off))-(pass))<<2)) & 0xFU) | \ + ((0x01145AF0U>>(((7-(off))-(pass))<<2)) & 0xF0U)) +#define PNG_ROW_IN_INTERLACE_PASS(y, pass) \ + ((PNG_PASS_MASK(pass,0) >> ((y)&7)) & 1) +#define PNG_COL_IN_INTERLACE_PASS(x, pass) \ + ((PNG_PASS_MASK(pass,1) >> ((x)&7)) & 1) + +/* These are needed too for the default build: */ +#define PNG_WRITE_16BIT_SUPPORTED +#define PNG_READ_16BIT_SUPPORTED + +/* This comes from pnglibconf.h afer 1.5: */ +#define PNG_FP_1 100000 +#define PNG_GAMMA_THRESHOLD_FIXED\ + ((png_fixed_point)(PNG_GAMMA_THRESHOLD * PNG_FP_1)) +#endif + +#if PNG_LIBPNG_VER < 10600 + /* 1.6.0 constifies many APIs. The following exists to allow pngvalid to be + * compiled against earlier versions. + */ +# define png_const_structp png_structp +#endif + +#if PNG_LIBPNG_VER < 10700 + /* Copied from libpng 1.7.0 png.h */ +#define PNG_u2(b1, b2) (((unsigned int)(b1) << 8) + (b2)) + +#define PNG_U16(b1, b2) ((png_uint_16)PNG_u2(b1, b2)) +#define PNG_U32(b1, b2, b3, b4)\ + (((png_uint_32)PNG_u2(b1, b2) << 16) + PNG_u2(b3, b4)) + +/* Constants for known chunk types. + */ +#define png_IDAT PNG_U32( 73, 68, 65, 84) +#define png_IEND PNG_U32( 73, 69, 78, 68) +#define png_IHDR PNG_U32( 73, 72, 68, 82) +#define png_PLTE PNG_U32( 80, 76, 84, 69) +#define png_bKGD PNG_U32( 98, 75, 71, 68) +#define png_cHRM PNG_U32( 99, 72, 82, 77) +#define png_fRAc PNG_U32(102, 82, 65, 99) /* registered, not defined */ +#define png_gAMA PNG_U32(103, 65, 77, 65) +#define png_gIFg PNG_U32(103, 73, 70, 103) +#define png_gIFt PNG_U32(103, 73, 70, 116) /* deprecated */ +#define png_gIFx PNG_U32(103, 73, 70, 120) +#define png_hIST PNG_U32(104, 73, 83, 84) +#define png_iCCP PNG_U32(105, 67, 67, 80) +#define png_iTXt PNG_U32(105, 84, 88, 116) +#define png_oFFs PNG_U32(111, 70, 70, 115) +#define png_pCAL PNG_U32(112, 67, 65, 76) +#define png_pHYs PNG_U32(112, 72, 89, 115) +#define png_sBIT PNG_U32(115, 66, 73, 84) +#define png_sCAL PNG_U32(115, 67, 65, 76) +#define png_sPLT PNG_U32(115, 80, 76, 84) +#define png_sRGB PNG_U32(115, 82, 71, 66) +#define png_sTER PNG_U32(115, 84, 69, 82) +#define png_tEXt PNG_U32(116, 69, 88, 116) +#define png_tIME PNG_U32(116, 73, 77, 69) +#define png_tRNS PNG_U32(116, 82, 78, 83) +#define png_zTXt PNG_U32(122, 84, 88, 116) + +/* Test on flag values as defined in the spec (section 5.4): */ +#define PNG_CHUNK_ANCILLARY(c) (1 & ((c) >> 29)) +#define PNG_CHUNK_CRITICAL(c) (!PNG_CHUNK_ANCILLARY(c)) +#define PNG_CHUNK_PRIVATE(c) (1 & ((c) >> 21)) +#define PNG_CHUNK_RESERVED(c) (1 & ((c) >> 13)) +#define PNG_CHUNK_SAFE_TO_COPY(c) (1 & ((c) >> 5)) + +#endif /* PNG_LIBPNG_VER < 10700 */ + +#ifdef __cplusplus +# define this not_the_cpp_this +# define new not_the_cpp_new +# define voidcast(type, value) static_cast(value) +#else +# define voidcast(type, value) (value) +#endif /* __cplusplus */ + +/* Unused formal parameter errors are removed using the following macro which is + * expected to have no bad effects on performance. + */ +#ifndef UNUSED +# if defined(__GNUC__) || defined(_MSC_VER) +# define UNUSED(param) (void)param; +# else +# define UNUSED(param) +# endif +#endif + +/* Types of chunks not known to libpng */ +#define png_vpAg PNG_U32(118, 112, 65, 103) + +/* Chunk information */ +#define PNG_INFO_tEXt 0x10000000U +#define PNG_INFO_iTXt 0x20000000U +#define PNG_INFO_zTXt 0x40000000U + +#define PNG_INFO_sTER 0x01000000U +#define PNG_INFO_vpAg 0x02000000U + +#define ABSENT 0 +#define START 1 +#define END 2 + +static struct +{ + char name[5]; + png_uint_32 flag; + png_uint_32 tag; + int unknown; /* Chunk not known to libpng */ + int all; /* Chunk set by the '-1' option */ + int position; /* position in pngtest.png */ + int keep; /* unknown handling setting */ +} chunk_info[] = { + /* Critical chunks */ + { "IDAT", PNG_INFO_IDAT, png_IDAT, 0, 0, START, 0 }, /* must be [0] */ + { "PLTE", PNG_INFO_PLTE, png_PLTE, 0, 0, ABSENT, 0 }, + + /* Non-critical chunks that libpng handles */ + /* This is a mess but it seems to be the only way to do it - there is no way + * to check for a definition outside a #if. + */ + { "bKGD", PNG_INFO_bKGD, png_bKGD, +# ifdef PNG_READ_bKGD_SUPPORTED + 0, +# else + 1, +# endif + 1, START, 0 }, + { "cHRM", PNG_INFO_cHRM, png_cHRM, +# ifdef PNG_READ_cHRM_SUPPORTED + 0, +# else + 1, +# endif + 1, START, 0 }, + { "gAMA", PNG_INFO_gAMA, png_gAMA, +# ifdef PNG_READ_gAMA_SUPPORTED + 0, +# else + 1, +# endif + 1, START, 0 }, + { "hIST", PNG_INFO_hIST, png_hIST, +# ifdef PNG_READ_hIST_SUPPORTED + 0, +# else + 1, +# endif + 1, ABSENT, 0 }, + { "iCCP", PNG_INFO_iCCP, png_iCCP, +# ifdef PNG_READ_iCCP_SUPPORTED + 0, +# else + 1, +# endif + 1, ABSENT, 0 }, + { "iTXt", PNG_INFO_iTXt, png_iTXt, +# ifdef PNG_READ_iTXt_SUPPORTED + 0, +# else + 1, +# endif + 1, ABSENT, 0 }, + { "oFFs", PNG_INFO_oFFs, png_oFFs, +# ifdef PNG_READ_oFFs_SUPPORTED + 0, +# else + 1, +# endif + 1, START, 0 }, + { "pCAL", PNG_INFO_pCAL, png_pCAL, +# ifdef PNG_READ_pCAL_SUPPORTED + 0, +# else + 1, +# endif + 1, START, 0 }, + { "pHYs", PNG_INFO_pHYs, png_pHYs, +# ifdef PNG_READ_pHYs_SUPPORTED + 0, +# else + 1, +# endif + 1, START, 0 }, + { "sBIT", PNG_INFO_sBIT, png_sBIT, +# ifdef PNG_READ_sBIT_SUPPORTED + 0, +# else + 1, +# endif + 1, START, 0 }, + { "sCAL", PNG_INFO_sCAL, png_sCAL, +# ifdef PNG_READ_sCAL_SUPPORTED + 0, +# else + 1, +# endif + 1, START, 0 }, + { "sPLT", PNG_INFO_sPLT, png_sPLT, +# ifdef PNG_READ_sPLT_SUPPORTED + 0, +# else + 1, +# endif + 1, ABSENT, 0 }, + { "sRGB", PNG_INFO_sRGB, png_sRGB, +# ifdef PNG_READ_sRGB_SUPPORTED + 0, +# else + 1, +# endif + 1, START, 0 }, + { "tEXt", PNG_INFO_tEXt, png_tEXt, +# ifdef PNG_READ_tEXt_SUPPORTED + 0, +# else + 1, +# endif + 1, START, 0 }, + { "tIME", PNG_INFO_tIME, png_tIME, +# ifdef PNG_READ_tIME_SUPPORTED + 0, +# else + 1, +# endif + 1, START, 0 }, + { "tRNS", PNG_INFO_tRNS, png_tRNS, +# ifdef PNG_READ_tRNS_SUPPORTED + 0, +# else + 1, +# endif + 0, ABSENT, 0 }, + { "zTXt", PNG_INFO_zTXt, png_zTXt, +# ifdef PNG_READ_zTXt_SUPPORTED + 0, +# else + 1, +# endif + 1, END, 0 }, + + /* No libpng handling */ + { "sTER", PNG_INFO_sTER, png_sTER, 1, 1, START, 0 }, + { "vpAg", PNG_INFO_vpAg, png_vpAg, 1, 0, START, 0 }, +}; + +#define NINFO ((int)((sizeof chunk_info)/(sizeof chunk_info[0]))) + +static void +clear_keep(void) +{ + int i = NINFO; + while (--i >= 0) + chunk_info[i].keep = 0; +} + +static int +find(const char *name) +{ + int i = NINFO; + while (--i >= 0) + { + if (memcmp(chunk_info[i].name, name, 4) == 0) + break; + } + + return i; +} + +static int +findb(const png_byte *name) +{ + int i = NINFO; + while (--i >= 0) + { + if (memcmp(chunk_info[i].name, name, 4) == 0) + break; + } + + return i; +} + +static int +find_by_flag(png_uint_32 flag) +{ + int i = NINFO; + + while (--i >= 0) if (chunk_info[i].flag == flag) return i; + + fprintf(stderr, "pngunknown: internal error\n"); + exit(4); +} + +static int +ancillary(const char *name) +{ + return PNG_CHUNK_ANCILLARY(PNG_U32(name[0], name[1], name[2], name[3])); +} + +#ifdef PNG_SAVE_UNKNOWN_CHUNKS_SUPPORTED +static int +ancillaryb(const png_byte *name) +{ + return PNG_CHUNK_ANCILLARY(PNG_U32(name[0], name[1], name[2], name[3])); +} +#endif + +/* Type of an error_ptr */ +typedef struct +{ + jmp_buf error_return; + png_structp png_ptr; + png_infop info_ptr, end_ptr; + png_uint_32 before_IDAT; + png_uint_32 after_IDAT; + int error_count; + int warning_count; + int keep; /* the default value */ + const char *program; + const char *file; + const char *test; +} display; + +static const char init[] = "initialization"; +static const char cmd[] = "command line"; + +static void +init_display(display *d, const char *program) +{ + memset(d, 0, sizeof *d); + d->png_ptr = NULL; + d->info_ptr = d->end_ptr = NULL; + d->error_count = d->warning_count = 0; + d->program = program; + d->file = program; + d->test = init; +} + +static void +clean_display(display *d) +{ + png_destroy_read_struct(&d->png_ptr, &d->info_ptr, &d->end_ptr); + + /* This must not happen - it might cause an app crash */ + if (d->png_ptr != NULL || d->info_ptr != NULL || d->end_ptr != NULL) + { + fprintf(stderr, "%s(%s): png_destroy_read_struct error\n", d->file, + d->test); + exit(1); + } +} + +PNG_FUNCTION(void, display_exit, (display *d), static PNG_NORETURN) +{ + ++(d->error_count); + + if (d->png_ptr != NULL) + clean_display(d); + + /* During initialization and if this is a single command line argument set + * exit now - there is only one test, otherwise longjmp to do the next test. + */ + if (d->test == init || d->test == cmd) + exit(1); + + longjmp(d->error_return, 1); +} + +static int +display_rc(const display *d, int strict) +{ + return d->error_count + (strict ? d->warning_count : 0); +} + +/* libpng error and warning callbacks */ +PNG_FUNCTION(void, (PNGCBAPI error), (png_structp png_ptr, const char *message), + static PNG_NORETURN) +{ + display *d = (display*)png_get_error_ptr(png_ptr); + + fprintf(stderr, "%s(%s): libpng error: %s\n", d->file, d->test, message); + display_exit(d); +} + +static void PNGCBAPI +warning(png_structp png_ptr, const char *message) +{ + display *d = (display*)png_get_error_ptr(png_ptr); + + fprintf(stderr, "%s(%s): libpng warning: %s\n", d->file, d->test, message); + ++(d->warning_count); +} + +static png_uint_32 +get_valid(display *d, png_infop info_ptr) +{ + png_uint_32 flags = png_get_valid(d->png_ptr, info_ptr, (png_uint_32)~0); + + /* Map the text chunks back into the flags */ + { + png_textp text; + png_uint_32 ntext = png_get_text(d->png_ptr, info_ptr, &text, NULL); + + while (ntext-- > 0) switch (text[ntext].compression) + { + case -1: + flags |= PNG_INFO_tEXt; + break; + case 0: + flags |= PNG_INFO_zTXt; + break; + case 1: + case 2: + flags |= PNG_INFO_iTXt; + break; + default: + fprintf(stderr, "%s(%s): unknown text compression %d\n", d->file, + d->test, text[ntext].compression); + display_exit(d); + } + } + + return flags; +} + +#ifdef PNG_READ_USER_CHUNKS_SUPPORTED +static int PNGCBAPI +read_callback(png_structp pp, png_unknown_chunkp pc) +{ + /* This function mimics the behavior of png_set_keep_unknown_chunks by + * returning '0' to keep the chunk and '1' to discard it. + */ + display *d = voidcast(display*, png_get_user_chunk_ptr(pp)); + int chunk = findb(pc->name); + int keep, discard; + + if (chunk < 0) /* not one in our list, so not a known chunk */ + keep = d->keep; + + else + { + keep = chunk_info[chunk].keep; + if (keep == PNG_HANDLE_CHUNK_AS_DEFAULT) + { + /* See the comments in png.h - use the default for unknown chunks, + * do not keep known chunks. + */ + if (chunk_info[chunk].unknown) + keep = d->keep; + + else + keep = PNG_HANDLE_CHUNK_NEVER; + } + } + + switch (keep) + { + default: + fprintf(stderr, "%s(%s): %d: unrecognized chunk option\n", d->file, + d->test, chunk_info[chunk].keep); + display_exit(d); + + case PNG_HANDLE_CHUNK_AS_DEFAULT: + case PNG_HANDLE_CHUNK_NEVER: + discard = 1/*handled; discard*/; + break; + + case PNG_HANDLE_CHUNK_IF_SAFE: + case PNG_HANDLE_CHUNK_ALWAYS: + discard = 0/*not handled; keep*/; + break; + } + + /* Also store information about this chunk in the display, the relevant flag + * is set if the chunk is to be kept ('not handled'.) + */ + if (chunk >= 0) if (!discard) /* stupidity to stop a GCC warning */ + { + png_uint_32 flag = chunk_info[chunk].flag; + + if (pc->location & PNG_AFTER_IDAT) + d->after_IDAT |= flag; + + else + d->before_IDAT |= flag; + } + + /* However if there is no support to store unknown chunks don't ask libpng to + * do it; there will be an png_error. + */ +# ifdef PNG_SAVE_UNKNOWN_CHUNKS_SUPPORTED + return discard; +# else + return 1; /*handled; discard*/ +# endif +} +#endif /* READ_USER_CHUNKS_SUPPORTED */ + +#ifdef PNG_SAVE_UNKNOWN_CHUNKS_SUPPORTED +static png_uint_32 +get_unknown(display *d, png_infop info_ptr, int after_IDAT) +{ + /* Create corresponding 'unknown' flags */ + png_uint_32 flags = 0; + + UNUSED(after_IDAT) + + { + png_unknown_chunkp unknown; + int num_unknown = png_get_unknown_chunks(d->png_ptr, info_ptr, &unknown); + + while (--num_unknown >= 0) + { + int chunk = findb(unknown[num_unknown].name); + + /* Chunks not known to pngunknown must be validated here; since they + * must also be unknown to libpng the 'display->keep' behavior should + * have been used. + */ + if (chunk < 0) switch (d->keep) + { + default: /* impossible */ + case PNG_HANDLE_CHUNK_AS_DEFAULT: + case PNG_HANDLE_CHUNK_NEVER: + fprintf(stderr, "%s(%s): %s: %s: unknown chunk saved\n", + d->file, d->test, d->keep ? "discard" : "default", + unknown[num_unknown].name); + ++(d->error_count); + break; + + case PNG_HANDLE_CHUNK_IF_SAFE: + if (!ancillaryb(unknown[num_unknown].name)) + { + fprintf(stderr, + "%s(%s): if-safe: %s: unknown critical chunk saved\n", + d->file, d->test, unknown[num_unknown].name); + ++(d->error_count); + break; + } + /* FALL THROUGH (safe) */ + case PNG_HANDLE_CHUNK_ALWAYS: + break; + } + + else + flags |= chunk_info[chunk].flag; + } + } + + return flags; +} +#else +static png_uint_32 +get_unknown(display *d, png_infop info_ptr, int after_IDAT) + /* Otherwise this will return the cached values set by any user callback */ +{ + UNUSED(info_ptr); + + if (after_IDAT) + return d->after_IDAT; + + else + return d->before_IDAT; +} + +# ifndef PNG_READ_USER_CHUNKS_SUPPORTED + /* The #defines above should mean this is never reached, it's just here as + * a check to ensure the logic is correct. + */ +# error No store support and no user chunk support, this will not work +# endif +#endif + +static int +check(FILE *fp, int argc, const char **argv, png_uint_32p flags/*out*/, + display *d, int set_callback) +{ + int i, npasses, ipass; + png_uint_32 height; + + d->keep = PNG_HANDLE_CHUNK_AS_DEFAULT; + d->before_IDAT = 0; + d->after_IDAT = 0; + + /* Some of these errors are permanently fatal and cause an exit here, others + * are per-test and cause an error return. + */ + d->png_ptr = png_create_read_struct(PNG_LIBPNG_VER_STRING, d, error, + warning); + if (d->png_ptr == NULL) + { + fprintf(stderr, "%s(%s): could not allocate png struct\n", d->file, + d->test); + /* Terminate here, this error is not test specific. */ + exit(1); + } + + d->info_ptr = png_create_info_struct(d->png_ptr); + d->end_ptr = png_create_info_struct(d->png_ptr); + if (d->info_ptr == NULL || d->end_ptr == NULL) + { + fprintf(stderr, "%s(%s): could not allocate png info\n", d->file, + d->test); + clean_display(d); + exit(1); + } + + png_init_io(d->png_ptr, fp); + +# ifdef PNG_READ_USER_CHUNKS_SUPPORTED + /* This is only done if requested by the caller; it interferes with the + * standard store/save mechanism. + */ + if (set_callback) + png_set_read_user_chunk_fn(d->png_ptr, d, read_callback); +# else + UNUSED(set_callback) +# endif + + /* Handle each argument in turn; multiple settings are possible for the same + * chunk and multiple calls will occur (the last one should override all + * preceding ones). + */ + for (i=0; i= 10700 &&\ + !defined(PNG_SAVE_UNKNOWN_CHUNKS_SUPPORTED) + if (option < PNG_HANDLE_CHUNK_IF_SAFE) +# endif /* 1.7+ SAVE_UNKNOWN_CHUNKS */ + { + png_byte name[5]; + + memcpy(name, chunk_info[chunk].name, 5); + png_set_keep_unknown_chunks(d->png_ptr, option, name, 1); + chunk_info[chunk].keep = option; + } + continue; + } + + break; + + case 7: /* default */ + if (memcmp(argv[i], "default", 7) == 0) + { +# if PNG_LIBPNG_VER >= 10700 &&\ + !defined(PNG_SAVE_UNKNOWN_CHUNKS_SUPPORTED) + if (option < PNG_HANDLE_CHUNK_IF_SAFE) +# endif /* 1.7+ SAVE_UNKNOWN_CHUNKS */ + png_set_keep_unknown_chunks(d->png_ptr, option, NULL, 0); + + d->keep = option; + continue; + } + + break; + + case 3: /* all */ + if (memcmp(argv[i], "all", 3) == 0) + { +# if PNG_LIBPNG_VER >= 10700 &&\ + !defined(PNG_SAVE_UNKNOWN_CHUNKS_SUPPORTED) + if (option < PNG_HANDLE_CHUNK_IF_SAFE) +# endif /* 1.7+ SAVE_UNKNOWN_CHUNKS */ + png_set_keep_unknown_chunks(d->png_ptr, option, NULL, -1); + + d->keep = option; + + for (chunk = 0; chunk < NINFO; ++chunk) + if (chunk_info[chunk].all) + chunk_info[chunk].keep = option; + continue; + } + + break; + + default: /* some misplaced = */ + + break; + } + } + + fprintf(stderr, "%s(%s): %s: unrecognized chunk argument\n", d->file, + d->test, argv[i]); + display_exit(d); + } + + png_read_info(d->png_ptr, d->info_ptr); + + switch (png_get_interlace_type(d->png_ptr, d->info_ptr)) + { + case PNG_INTERLACE_NONE: + npasses = 1; + break; + + case PNG_INTERLACE_ADAM7: + npasses = PNG_INTERLACE_ADAM7_PASSES; + break; + + default: + /* Hard error because it is not test specific */ + fprintf(stderr, "%s(%s): invalid interlace type\n", d->file, d->test); + clean_display(d); + exit(1); + } + + /* Skip the image data, if IDAT is not being handled then don't do this + * because it will cause a CRC error. + */ + if (chunk_info[0/*IDAT*/].keep == PNG_HANDLE_CHUNK_AS_DEFAULT) + { + png_start_read_image(d->png_ptr); + height = png_get_image_height(d->png_ptr, d->info_ptr); + + if (npasses > 1) + { + png_uint_32 width = png_get_image_width(d->png_ptr, d->info_ptr); + + for (ipass=0; ipass 0) + { + png_uint_32 y; + + for (y=0; ypng_ptr, NULL, NULL); + } + } + } /* interlaced */ + + else /* not interlaced */ + { + png_uint_32 y; + + for (y=0; ypng_ptr, NULL, NULL); + } + } + + png_read_end(d->png_ptr, d->end_ptr); + + flags[0] = get_valid(d, d->info_ptr); + flags[1] = get_unknown(d, d->info_ptr, 0/*before IDAT*/); + + /* Only png_read_png sets PNG_INFO_IDAT! */ + flags[chunk_info[0/*IDAT*/].keep != PNG_HANDLE_CHUNK_AS_DEFAULT] |= + PNG_INFO_IDAT; + + flags[2] = get_valid(d, d->end_ptr); + flags[3] = get_unknown(d, d->end_ptr, 1/*after IDAT*/); + + clean_display(d); + + return d->keep; +} + +static void +check_error(display *d, png_uint_32 flags, const char *message) +{ + while (flags) + { + png_uint_32 flag = flags & -(png_int_32)flags; + int i = find_by_flag(flag); + + fprintf(stderr, "%s(%s): chunk %s: %s\n", d->file, d->test, + chunk_info[i].name, message); + ++(d->error_count); + + flags &= ~flag; + } +} + +static void +check_handling(display *d, int def, png_uint_32 chunks, png_uint_32 known, + png_uint_32 unknown, const char *position, int set_callback) +{ + while (chunks) + { + png_uint_32 flag = chunks & -(png_int_32)chunks; + int i = find_by_flag(flag); + int keep = chunk_info[i].keep; + const char *type; + const char *errorx = NULL; + + if (chunk_info[i].unknown) + { + if (keep == PNG_HANDLE_CHUNK_AS_DEFAULT) + { + type = "UNKNOWN (default)"; + keep = def; + } + + else + type = "UNKNOWN (specified)"; + + if (flag & known) + errorx = "chunk processed"; + + else switch (keep) + { + case PNG_HANDLE_CHUNK_AS_DEFAULT: + if (flag & unknown) + errorx = "DEFAULT: unknown chunk saved"; + break; + + case PNG_HANDLE_CHUNK_NEVER: + if (flag & unknown) + errorx = "DISCARD: unknown chunk saved"; + break; + + case PNG_HANDLE_CHUNK_IF_SAFE: + if (ancillary(chunk_info[i].name)) + { + if (!(flag & unknown)) + errorx = "IF-SAFE: unknown ancillary chunk lost"; + } + + else if (flag & unknown) + errorx = "IF-SAFE: unknown critical chunk saved"; + break; + + case PNG_HANDLE_CHUNK_ALWAYS: + if (!(flag & unknown)) + errorx = "SAVE: unknown chunk lost"; + break; + + default: + errorx = "internal error: bad keep"; + break; + } + } /* unknown chunk */ + + else /* known chunk */ + { + type = "KNOWN"; + + if (flag & known) + { + /* chunk was processed, it won't have been saved because that is + * caught below when checking for inconsistent processing. + */ + if (keep != PNG_HANDLE_CHUNK_AS_DEFAULT) + errorx = "!DEFAULT: known chunk processed"; + } + + else /* not processed */ switch (keep) + { + case PNG_HANDLE_CHUNK_AS_DEFAULT: + errorx = "DEFAULT: known chunk not processed"; + break; + + case PNG_HANDLE_CHUNK_NEVER: + if (flag & unknown) + errorx = "DISCARD: known chunk saved"; + break; + + case PNG_HANDLE_CHUNK_IF_SAFE: + if (ancillary(chunk_info[i].name)) + { + if (!(flag & unknown)) + errorx = "IF-SAFE: known ancillary chunk lost"; + } + + else if (flag & unknown) + errorx = "IF-SAFE: known critical chunk saved"; + break; + + case PNG_HANDLE_CHUNK_ALWAYS: + if (!(flag & unknown)) + errorx = "SAVE: known chunk lost"; + break; + + default: + errorx = "internal error: bad keep (2)"; + break; + } + } + + if (errorx != NULL) + { + ++(d->error_count); + fprintf(stderr, "%s(%s%s): %s %s %s: %s\n", d->file, d->test, + set_callback ? ",callback" : "", + type, chunk_info[i].name, position, errorx); + } + + chunks &= ~flag; + } +} + +static void +perform_one_test(FILE *fp, int argc, const char **argv, + png_uint_32 *default_flags, display *d, int set_callback) +{ + int def; + png_uint_32 flags[2][4]; + + rewind(fp); + clear_keep(); + memcpy(flags[0], default_flags, sizeof flags[0]); + + def = check(fp, argc, argv, flags[1], d, set_callback); + + /* Chunks should either be known or unknown, never both and this should apply + * whether the chunk is before or after the IDAT (actually, the app can + * probably change this by swapping the handling after the image, but this + * test does not do that.) + */ + check_error(d, (flags[0][0]|flags[0][2]) & (flags[0][1]|flags[0][3]), + "chunk handled inconsistently in count tests"); + check_error(d, (flags[1][0]|flags[1][2]) & (flags[1][1]|flags[1][3]), + "chunk handled inconsistently in option tests"); + + /* Now find out what happened to each chunk before and after the IDAT and + * determine if the behavior was correct. First some basic sanity checks, + * any known chunk should be known in the original count, any unknown chunk + * should be either known or unknown in the original. + */ + { + png_uint_32 test; + + test = flags[1][0] & ~flags[0][0]; + check_error(d, test, "new known chunk before IDAT"); + test = flags[1][1] & ~(flags[0][0] | flags[0][1]); + check_error(d, test, "new unknown chunk before IDAT"); + test = flags[1][2] & ~flags[0][2]; + check_error(d, test, "new known chunk after IDAT"); + test = flags[1][3] & ~(flags[0][2] | flags[0][3]); + check_error(d, test, "new unknown chunk after IDAT"); + } + + /* Now each chunk in the original list should have been handled according to + * the options set for that chunk, regardless of whether libpng knows about + * it or not. + */ + check_handling(d, def, flags[0][0] | flags[0][1], flags[1][0], flags[1][1], + "before IDAT", set_callback); + check_handling(d, def, flags[0][2] | flags[0][3], flags[1][2], flags[1][3], + "after IDAT", set_callback); +} + +static void +perform_one_test_safe(FILE *fp, int argc, const char **argv, + png_uint_32 *default_flags, display *d, const char *test) +{ + if (setjmp(d->error_return) == 0) + { + d->test = test; /* allow use of d->error_return */ +# ifdef PNG_SAVE_UNKNOWN_CHUNKS_SUPPORTED + perform_one_test(fp, argc, argv, default_flags, d, 0); +# endif +# ifdef PNG_READ_USER_CHUNKS_SUPPORTED + perform_one_test(fp, argc, argv, default_flags, d, 1); +# endif + d->test = init; /* prevent use of d->error_return */ + } +} + +static const char *standard_tests[] = +{ + "discard", "default=discard", 0, + "save", "default=save", 0, + "if-safe", "default=if-safe", 0, + "vpAg", "vpAg=if-safe", 0, + "sTER", "sTER=if-safe", 0, + "IDAT", "default=discard", "IDAT=save", 0, + "sAPI", "bKGD=save", "cHRM=save", "gAMA=save", "all=discard", "iCCP=save", + "sBIT=save", "sRGB=save", 0, + 0/*end*/ +}; + +static PNG_NORETURN void +usage(const char *program, const char *reason) +{ + fprintf(stderr, "pngunknown: %s: usage:\n %s [--strict] " + "--default|{(CHNK|default|all)=(default|discard|if-safe|save)} " + "testfile.png\n", reason, program); + exit(99); +} + +int +main(int argc, const char **argv) +{ + FILE *fp; + png_uint_32 default_flags[4/*valid,unknown{before,after}*/]; + int strict = 0, default_tests = 0; + const char *count_argv = "default=save"; + const char *touch_file = NULL; + display d; + + init_display(&d, argv[0]); + + while (++argv, --argc > 0) + { + if (strcmp(*argv, "--strict") == 0) + strict = 1; + + else if (strcmp(*argv, "--default") == 0) + default_tests = 1; + + else if (strcmp(*argv, "--touch") == 0) + { + if (argc > 1) + touch_file = *++argv, --argc; + + else + usage(d.program, "--touch: missing file name"); + } + + else + break; + } + + /* A file name is required, but there should be no other arguments if + * --default was specified. + */ + if (argc <= 0) + usage(d.program, "missing test file"); + + /* GCC BUG: if (default_tests && argc != 1) triggers some weird GCC argc + * optimization which causes warnings with -Wstrict-overflow! + */ + else if (default_tests) if (argc != 1) + usage(d.program, "extra arguments"); + + /* The name of the test file is the last argument; remove it. */ + d.file = argv[--argc]; + + fp = fopen(d.file, "rb"); + if (fp == NULL) + { + perror(d.file); + exit(99); + } + + /* First find all the chunks, known and unknown, in the test file, a failure + * here aborts the whole test. + * + * If 'save' is supported then the normal saving method should happen, + * otherwise if 'read' is supported then the read callback will do the + * same thing. If both are supported the 'read' callback won't be + * instantiated by default. If 'save' is *not* supported then a user + * callback is required even though we can call png_get_unknown_chunks. + */ + if (check(fp, 1, &count_argv, default_flags, &d, +# ifdef PNG_SAVE_UNKNOWN_CHUNKS_SUPPORTED + 0 +# else + 1 +# endif + ) != PNG_HANDLE_CHUNK_ALWAYS) + { + fprintf(stderr, "%s: %s: internal error\n", d.program, d.file); + exit(99); + } + + /* Now find what the various supplied options cause to change: */ + if (!default_tests) + { + d.test = cmd; /* acts as a flag to say exit, do not longjmp */ +# ifdef PNG_SAVE_UNKNOWN_CHUNKS_SUPPORTED + perform_one_test(fp, argc, argv, default_flags, &d, 0); +# endif +# ifdef PNG_READ_USER_CHUNKS_SUPPORTED + perform_one_test(fp, argc, argv, default_flags, &d, 1); +# endif + d.test = init; + } + + else + { + const char **test = standard_tests; + + /* Set the exit_test pointer here so we can continue after a libpng error. + * NOTE: this leaks memory because the png_struct data from the failing + * test is never freed. + */ + while (*test) + { + const char *this_test = *test++; + const char **next = test; + int count = display_rc(&d, strict), new_count; + const char *result; + int arg_count = 0; + + while (*next) ++next, ++arg_count; + + perform_one_test_safe(fp, arg_count, test, default_flags, &d, + this_test); + + new_count = display_rc(&d, strict); + + if (new_count == count) + result = "PASS"; + + else + result = "FAIL"; + + printf("%s: %s %s\n", result, d.program, this_test); + + test = next+1; + } + } + + fclose(fp); + + if (display_rc(&d, strict) == 0) + { + /* Success, touch the success file if appropriate */ + if (touch_file != NULL) + { + FILE *fsuccess = fopen(touch_file, "wt"); + + if (fsuccess != NULL) + { + int err = 0; + fprintf(fsuccess, "PNG unknown tests succeeded\n"); + fflush(fsuccess); + err = ferror(fsuccess); + + if (fclose(fsuccess) || err) + { + fprintf(stderr, "%s: write failed\n", touch_file); + exit(99); + } + } + + else + { + fprintf(stderr, "%s: open failed\n", touch_file); + exit(99); + } + } + + return 0; + } + + return 1; +} + +#else /* !(READ_USER_CHUNKS || SAVE_UNKNOWN_CHUNKS) */ +int +main(void) +{ + fprintf(stderr, + " test ignored: no support to find out about unknown chunks\n"); + /* So the test is skipped: */ + return 77; +} +#endif /* READ_USER_CHUNKS || SAVE_UNKNOWN_CHUNKS */ + +#else /* !(SET_UNKNOWN_CHUNKS && READ) */ +int +main(void) +{ + fprintf(stderr, + " test ignored: no support to modify unknown chunk handling\n"); + /* So the test is skipped: */ + return 77; +} +#endif /* SET_UNKNOWN_CHUNKS && READ*/ diff --git a/compat/libpng/contrib/libtests/pngvalid.c b/compat/libpng/contrib/libtests/pngvalid.c new file mode 100755 index 0000000..55d0945 --- /dev/null +++ b/compat/libpng/contrib/libtests/pngvalid.c @@ -0,0 +1,11854 @@ + +/* pngvalid.c - validate libpng by constructing then reading png files. + * + * Last changed in libpng 1.6.21 [January 15, 2016] + * Copyright (c) 2014-2016 Glenn Randers-Pehrson + * Written by John Cunningham Bowler + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + * NOTES: + * This is a C program that is intended to be linked against libpng. It + * generates bitmaps internally, stores them as PNG files (using the + * sequential write code) then reads them back (using the sequential + * read code) and validates that the result has the correct data. + * + * The program can be modified and extended to test the correctness of + * transformations performed by libpng. + */ + +#define _POSIX_SOURCE 1 +#define _ISOC99_SOURCE 1 /* For floating point */ +#define _GNU_SOURCE 1 /* For the floating point exception extension */ + +#include +#include + +#if defined(HAVE_CONFIG_H) && !defined(PNG_NO_CONFIG_H) +# include +#endif + +#ifdef HAVE_FEENABLEEXCEPT /* from config.h, if included */ +# include +#endif + +#ifndef FE_DIVBYZERO +# define FE_DIVBYZERO 0 +#endif +#ifndef FE_INVALID +# define FE_INVALID 0 +#endif +#ifndef FE_OVERFLOW +# define FE_OVERFLOW 0 +#endif + +/* Define the following to use this test against your installed libpng, rather + * than the one being built here: + */ +#ifdef PNG_FREESTANDING_TESTS +# include +#else +# include "../../png.h" +#endif + +#ifdef PNG_ZLIB_HEADER +# include PNG_ZLIB_HEADER +#else +# include /* For crc32 */ +#endif + +/* 1.6.1 added support for the configure test harness, which uses 77 to indicate + * a skipped test, in earlier versions we need to succeed on a skipped test, so: + */ +#if PNG_LIBPNG_VER < 10601 +# define SKIP 0 +#else +# define SKIP 77 +#endif + +/* pngvalid requires write support and one of the fixed or floating point APIs. + */ +#if defined(PNG_WRITE_SUPPORTED) &&\ + (defined(PNG_FIXED_POINT_SUPPORTED) || defined(PNG_FLOATING_POINT_SUPPORTED)) + +#if PNG_LIBPNG_VER < 10500 +/* This deliberately lacks the const. */ +typedef png_byte *png_const_bytep; + +/* This is copied from 1.5.1 png.h: */ +#define PNG_INTERLACE_ADAM7_PASSES 7 +#define PNG_PASS_START_ROW(pass) (((1U&~(pass))<<(3-((pass)>>1)))&7) +#define PNG_PASS_START_COL(pass) (((1U& (pass))<<(3-(((pass)+1)>>1)))&7) +#define PNG_PASS_ROW_SHIFT(pass) ((pass)>2?(8-(pass))>>1:3) +#define PNG_PASS_COL_SHIFT(pass) ((pass)>1?(7-(pass))>>1:3) +#define PNG_PASS_ROWS(height, pass) (((height)+(((1<>PNG_PASS_ROW_SHIFT(pass)) +#define PNG_PASS_COLS(width, pass) (((width)+(((1<>PNG_PASS_COL_SHIFT(pass)) +#define PNG_ROW_FROM_PASS_ROW(yIn, pass) \ + (((yIn)<>(((7-(off))-(pass))<<2)) & 0xFU) | \ + ((0x01145AF0U>>(((7-(off))-(pass))<<2)) & 0xF0U)) +#define PNG_ROW_IN_INTERLACE_PASS(y, pass) \ + ((PNG_PASS_MASK(pass,0) >> ((y)&7)) & 1) +#define PNG_COL_IN_INTERLACE_PASS(x, pass) \ + ((PNG_PASS_MASK(pass,1) >> ((x)&7)) & 1) + +/* These are needed too for the default build: */ +#define PNG_WRITE_16BIT_SUPPORTED +#define PNG_READ_16BIT_SUPPORTED + +/* This comes from pnglibconf.h afer 1.5: */ +#define PNG_FP_1 100000 +#define PNG_GAMMA_THRESHOLD_FIXED\ + ((png_fixed_point)(PNG_GAMMA_THRESHOLD * PNG_FP_1)) +#endif + +#if PNG_LIBPNG_VER < 10600 + /* 1.6.0 constifies many APIs, the following exists to allow pngvalid to be + * compiled against earlier versions. + */ +# define png_const_structp png_structp +#endif + +#ifndef RELEASE_BUILD + /* RELEASE_BUILD is true for releases and release candidates: */ +# define RELEASE_BUILD (PNG_LIBPNG_BUILD_BASE_TYPE >= PNG_LIBPNG_BUILD_RC) +#endif +#if RELEASE_BUILD +# define debugonly(something) +#else /* !RELEASE_BUILD */ +# define debugonly(something) something +#endif /* !RELEASE_BUILD */ + +#include /* For floating point constants */ +#include /* For malloc */ +#include /* For memcpy, memset */ +#include /* For floor */ + +/* Unused formal parameter errors are removed using the following macro which is + * expected to have no bad effects on performance. + */ +#ifndef UNUSED +# if defined(__GNUC__) || defined(_MSC_VER) +# define UNUSED(param) (void)param; +# else +# define UNUSED(param) +# endif +#endif + +/***************************** EXCEPTION HANDLING *****************************/ +#ifdef PNG_FREESTANDING_TESTS +# include +#else +# include "../visupng/cexcept.h" +#endif + +#ifdef __cplusplus +# define this not_the_cpp_this +# define new not_the_cpp_new +# define voidcast(type, value) static_cast(value) +#else +# define voidcast(type, value) (value) +#endif /* __cplusplus */ + +struct png_store; +define_exception_type(struct png_store*); + +/* The following are macros to reduce typing everywhere where the well known + * name 'the_exception_context' must be defined. + */ +#define anon_context(ps) struct exception_context *the_exception_context = \ + &(ps)->exception_context +#define context(ps,fault) anon_context(ps); png_store *fault + +/* This macro returns the number of elements in an array as an (unsigned int), + * it is necessary to avoid the inability of certain versions of GCC to use + * the value of a compile-time constant when performing range checks. It must + * be passed an array name. + */ +#define ARRAY_SIZE(a) ((unsigned int)((sizeof (a))/(sizeof (a)[0]))) + +/* GCC BUG 66447 (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=66447) requires + * some broken GCC versions to be fixed up to avoid invalid whining about auto + * variables that are *not* changed within the scope of a setjmp being changed. + * + * Feel free to extend the list of broken versions. + */ +#define is_gnu(major,minor)\ + (defined __GNUC__) && __GNUC__ == (major) && __GNUC_MINOR__ == (minor) +#define is_gnu_patch(major,minor,patch)\ + is_gnu(major,minor) && __GNUC_PATCHLEVEL__ == 0 +/* For the moment just do it always; all versions of GCC seem to be broken: */ +#ifdef __GNUC__ + const void * volatile make_volatile_for_gnu; +# define gnu_volatile(x) make_volatile_for_gnu = &x; +#else /* !GNUC broken versions */ +# define gnu_volatile(x) +#endif /* !GNUC broken versions */ + +/******************************* UTILITIES ************************************/ +/* Error handling is particularly problematic in production code - error + * handlers often themselves have bugs which lead to programs that detect + * minor errors crashing. The following functions deal with one very + * common class of errors in error handlers - attempting to format error or + * warning messages into buffers that are too small. + */ +static size_t safecat(char *buffer, size_t bufsize, size_t pos, + const char *cat) +{ + while (pos < bufsize && cat != NULL && *cat != 0) + buffer[pos++] = *cat++; + + if (pos >= bufsize) + pos = bufsize-1; + + buffer[pos] = 0; + return pos; +} + +static size_t safecatn(char *buffer, size_t bufsize, size_t pos, int n) +{ + char number[64]; + sprintf(number, "%d", n); + return safecat(buffer, bufsize, pos, number); +} + +#ifdef PNG_READ_TRANSFORMS_SUPPORTED +static size_t safecatd(char *buffer, size_t bufsize, size_t pos, double d, + int precision) +{ + char number[64]; + sprintf(number, "%.*f", precision, d); + return safecat(buffer, bufsize, pos, number); +} +#endif + +static const char invalid[] = "invalid"; +static const char sep[] = ": "; + +static const char *colour_types[8] = +{ + "grayscale", invalid, "truecolour", "indexed-colour", + "grayscale with alpha", invalid, "truecolour with alpha", invalid +}; + +#ifdef PNG_READ_TRANSFORMS_SUPPORTED +/* Convert a double precision value to fixed point. */ +static png_fixed_point +fix(double d) +{ + d = floor(d * PNG_FP_1 + .5); + return (png_fixed_point)d; +} +#endif /* PNG_READ_SUPPORTED */ + +/* Generate random bytes. This uses a boring repeatable algorithm and it + * is implemented here so that it gives the same set of numbers on every + * architecture. It's a linear congruential generator (Knuth or Sedgewick + * "Algorithms") but it comes from the 'feedback taps' table in Horowitz and + * Hill, "The Art of Electronics" (Pseudo-Random Bit Sequences and Noise + * Generation.) + */ +static void +make_random_bytes(png_uint_32* seed, void* pv, size_t size) +{ + png_uint_32 u0 = seed[0], u1 = seed[1]; + png_bytep bytes = voidcast(png_bytep, pv); + + /* There are thirty three bits, the next bit in the sequence is bit-33 XOR + * bit-20. The top 1 bit is in u1, the bottom 32 are in u0. + */ + size_t i; + for (i=0; i> (20-8)) ^ ((u1 << 7) | (u0 >> (32-7)))) & 0xff; + u1 <<= 8; + u1 |= u0 >> 24; + u0 <<= 8; + u0 |= u; + *bytes++ = (png_byte)u; + } + + seed[0] = u0; + seed[1] = u1; +} + +static void +make_four_random_bytes(png_uint_32* seed, png_bytep bytes) +{ + make_random_bytes(seed, bytes, 4); +} + +#if defined PNG_READ_SUPPORTED || defined PNG_WRITE_tRNS_SUPPORTED ||\ + defined PNG_WRITE_FILTER_SUPPORTED +static void +randomize(void *pv, size_t size) +{ + static png_uint_32 random_seed[2] = {0x56789abc, 0xd}; + make_random_bytes(random_seed, pv, size); +} + +#define R8(this) randomize(&(this), sizeof (this)) + +static void r16(png_uint_16p p16, size_t count) +{ + size_t i; + + for (i=0; i> 3) & 0x1fU)) +#define PALETTE_FROM_ID(id) (((id) >> 8) & 0x1f) +#define INTERLACE_FROM_ID(id) ((png_byte)(((id) >> 13) & 0x3)) +#define DO_INTERLACE_FROM_ID(id) ((int)(((id)>>15) & 1)) +#define WIDTH_FROM_ID(id) (((id)>>16) & 0xff) +#define HEIGHT_FROM_ID(id) (((id)>>24) & 0xff) + +/* Utility to construct a standard name for a standard image. */ +static size_t +standard_name(char *buffer, size_t bufsize, size_t pos, png_byte colour_type, + int bit_depth, unsigned int npalette, int interlace_type, + png_uint_32 w, png_uint_32 h, int do_interlace) +{ + pos = safecat(buffer, bufsize, pos, colour_types[colour_type]); + if (colour_type == 3) /* must have a palette */ + { + pos = safecat(buffer, bufsize, pos, "["); + pos = safecatn(buffer, bufsize, pos, npalette); + pos = safecat(buffer, bufsize, pos, "]"); + } + + else if (npalette != 0) + pos = safecat(buffer, bufsize, pos, "+tRNS"); + + pos = safecat(buffer, bufsize, pos, " "); + pos = safecatn(buffer, bufsize, pos, bit_depth); + pos = safecat(buffer, bufsize, pos, " bit"); + + if (interlace_type != PNG_INTERLACE_NONE) + { + pos = safecat(buffer, bufsize, pos, " interlaced"); + if (do_interlace) + pos = safecat(buffer, bufsize, pos, "(pngvalid)"); + else + pos = safecat(buffer, bufsize, pos, "(libpng)"); + } + + if (w > 0 || h > 0) + { + pos = safecat(buffer, bufsize, pos, " "); + pos = safecatn(buffer, bufsize, pos, w); + pos = safecat(buffer, bufsize, pos, "x"); + pos = safecatn(buffer, bufsize, pos, h); + } + + return pos; +} + +static size_t +standard_name_from_id(char *buffer, size_t bufsize, size_t pos, png_uint_32 id) +{ + return standard_name(buffer, bufsize, pos, COL_FROM_ID(id), + DEPTH_FROM_ID(id), PALETTE_FROM_ID(id), INTERLACE_FROM_ID(id), + WIDTH_FROM_ID(id), HEIGHT_FROM_ID(id), DO_INTERLACE_FROM_ID(id)); +} + +/* Convenience API and defines to list valid formats. Note that 16 bit read and + * write support is required to do 16 bit read tests (we must be able to make a + * 16 bit image to test!) + */ +#ifdef PNG_WRITE_16BIT_SUPPORTED +# define WRITE_BDHI 4 +# ifdef PNG_READ_16BIT_SUPPORTED +# define READ_BDHI 4 +# define DO_16BIT +# endif +#else +# define WRITE_BDHI 3 +#endif +#ifndef DO_16BIT +# define READ_BDHI 3 +#endif + +/* The following defines the number of different palettes to generate for + * each log bit depth of a colour type 3 standard image. + */ +#define PALETTE_COUNT(bit_depth) ((bit_depth) > 4 ? 1U : 16U) + +static int +next_format(png_bytep colour_type, png_bytep bit_depth, + unsigned int* palette_number, int low_depth_gray, int tRNS) +{ + if (*bit_depth == 0) + { + *colour_type = 0; + if (low_depth_gray) + *bit_depth = 1; + else + *bit_depth = 8; + *palette_number = 0; + return 1; + } + + if (*colour_type < 4/*no alpha channel*/) + { + /* Add multiple palettes for colour type 3, one image with tRNS + * and one without for other non-alpha formats: + */ + unsigned int pn = ++*palette_number; + png_byte ct = *colour_type; + + if (((ct == 0/*GRAY*/ || ct/*RGB*/ == 2) && tRNS && pn < 2) || + (ct == 3/*PALETTE*/ && pn < PALETTE_COUNT(*bit_depth))) + return 1; + + /* No: next bit depth */ + *palette_number = 0; + } + + *bit_depth = (png_byte)(*bit_depth << 1); + + /* Palette images are restricted to 8 bit depth */ + if (*bit_depth <= 8 +#ifdef DO_16BIT + || (*colour_type != 3 && *bit_depth <= 16) +#endif + ) + return 1; + + /* Move to the next color type, or return 0 at the end. */ + switch (*colour_type) + { + case 0: + *colour_type = 2; + *bit_depth = 8; + return 1; + + case 2: + *colour_type = 3; + *bit_depth = 1; + return 1; + + case 3: + *colour_type = 4; + *bit_depth = 8; + return 1; + + case 4: + *colour_type = 6; + *bit_depth = 8; + return 1; + + default: + return 0; + } +} + +#ifdef PNG_READ_TRANSFORMS_SUPPORTED +static unsigned int +sample(png_const_bytep row, png_byte colour_type, png_byte bit_depth, + png_uint_32 x, unsigned int sample_index, int swap16, int littleendian) +{ + png_uint_32 bit_index, result; + + /* Find a sample index for the desired sample: */ + x *= bit_depth; + bit_index = x; + + if ((colour_type & 1) == 0) /* !palette */ + { + if (colour_type & 2) + bit_index *= 3; + + if (colour_type & 4) + bit_index += x; /* Alpha channel */ + + /* Multiple channels; select one: */ + if (colour_type & (2+4)) + bit_index += sample_index * bit_depth; + } + + /* Return the sample from the row as an integer. */ + row += bit_index >> 3; + result = *row; + + if (bit_depth == 8) + return result; + + else if (bit_depth > 8) + { + if (swap16) + return (*++row << 8) + result; + else + return (result << 8) + *++row; + } + + /* Less than 8 bits per sample. By default PNG has the big end of + * the egg on the left of the screen, but if littleendian is set + * then the big end is on the right. + */ + bit_index &= 7; + + if (!littleendian) + bit_index = 8-bit_index-bit_depth; + + return (result >> bit_index) & ((1U<> 3] & ~destMask; + unsigned int sourceByte = fromBuffer[fromIndex >> 3]; + + /* Don't rely on << or >> supporting '0' here, just in case: */ + fromIndex &= 7; + if (littleendian) + { + if (fromIndex > 0) sourceByte >>= fromIndex; + if ((toIndex & 7) > 0) sourceByte <<= toIndex & 7; + } + + else + { + if (fromIndex > 0) sourceByte <<= fromIndex; + if ((toIndex & 7) > 0) sourceByte >>= toIndex & 7; + } + + toBuffer[toIndex >> 3] = (png_byte)(destByte | (sourceByte & destMask)); + } + else /* One or more bytes */ + memmove(toBuffer+(toIndex>>3), fromBuffer+(fromIndex>>3), pixelSize>>3); +} + +#ifdef PNG_READ_SUPPORTED +/* Copy a complete row of pixels, taking into account potential partial + * bytes at the end. + */ +static void +row_copy(png_bytep toBuffer, png_const_bytep fromBuffer, unsigned int bitWidth, + int littleendian) +{ + memcpy(toBuffer, fromBuffer, bitWidth >> 3); + + if ((bitWidth & 7) != 0) + { + unsigned int mask; + + toBuffer += bitWidth >> 3; + fromBuffer += bitWidth >> 3; + if (littleendian) + mask = 0xff << (bitWidth & 7); + else + mask = 0xff >> (bitWidth & 7); + *toBuffer = (png_byte)((*toBuffer & mask) | (*fromBuffer & ~mask)); + } +} + +/* Compare pixels - they are assumed to start at the first byte in the + * given buffers. + */ +static int +pixel_cmp(png_const_bytep pa, png_const_bytep pb, png_uint_32 bit_width) +{ +#if PNG_LIBPNG_VER < 10506 + if (memcmp(pa, pb, bit_width>>3) == 0) + { + png_uint_32 p; + + if ((bit_width & 7) == 0) return 0; + + /* Ok, any differences? */ + p = pa[bit_width >> 3]; + p ^= pb[bit_width >> 3]; + + if (p == 0) return 0; + + /* There are, but they may not be significant, remove the bits + * after the end (the low order bits in PNG.) + */ + bit_width &= 7; + p >>= 8-bit_width; + + if (p == 0) return 0; + } +#else + /* From libpng-1.5.6 the overwrite should be fixed, so compare the trailing + * bits too: + */ + if (memcmp(pa, pb, (bit_width+7)>>3) == 0) + return 0; +#endif + + /* Return the index of the changed byte. */ + { + png_uint_32 where = 0; + + while (pa[where] == pb[where]) ++where; + return 1+where; + } +} +#endif /* PNG_READ_SUPPORTED */ + +/*************************** BASIC PNG FILE WRITING ***************************/ +/* A png_store takes data from the sequential writer or provides data + * to the sequential reader. It can also store the result of a PNG + * write for later retrieval. + */ +#define STORE_BUFFER_SIZE 500 /* arbitrary */ +typedef struct png_store_buffer +{ + struct png_store_buffer* prev; /* NOTE: stored in reverse order */ + png_byte buffer[STORE_BUFFER_SIZE]; +} png_store_buffer; + +#define FILE_NAME_SIZE 64 + +typedef struct store_palette_entry /* record of a single palette entry */ +{ + png_byte red; + png_byte green; + png_byte blue; + png_byte alpha; +} store_palette_entry, store_palette[256]; + +typedef struct png_store_file +{ + struct png_store_file* next; /* as many as you like... */ + char name[FILE_NAME_SIZE]; + png_uint_32 id; /* must be correct (see FILEID) */ + png_size_t datacount; /* In this (the last) buffer */ + png_store_buffer data; /* Last buffer in file */ + int npalette; /* Number of entries in palette */ + store_palette_entry* palette; /* May be NULL */ +} png_store_file; + +/* The following is a pool of memory allocated by a single libpng read or write + * operation. + */ +typedef struct store_pool +{ + struct png_store *store; /* Back pointer */ + struct store_memory *list; /* List of allocated memory */ + png_byte mark[4]; /* Before and after data */ + + /* Statistics for this run. */ + png_alloc_size_t max; /* Maximum single allocation */ + png_alloc_size_t current; /* Current allocation */ + png_alloc_size_t limit; /* Highest current allocation */ + png_alloc_size_t total; /* Total allocation */ + + /* Overall statistics (retained across successive runs). */ + png_alloc_size_t max_max; + png_alloc_size_t max_limit; + png_alloc_size_t max_total; +} store_pool; + +typedef struct png_store +{ + /* For cexcept.h exception handling - simply store one of these; + * the context is a self pointer but it may point to a different + * png_store (in fact it never does in this program.) + */ + struct exception_context + exception_context; + + unsigned int verbose :1; + unsigned int treat_warnings_as_errors :1; + unsigned int expect_error :1; + unsigned int expect_warning :1; + unsigned int saw_warning :1; + unsigned int speed :1; + unsigned int progressive :1; /* use progressive read */ + unsigned int validated :1; /* used as a temporary flag */ + int nerrors; + int nwarnings; + int noptions; /* number of options below: */ + struct { + unsigned char option; /* option number, 0..30 */ + unsigned char setting; /* setting (unset,invalid,on,off) */ + } options[16]; + char test[128]; /* Name of test */ + char error[256]; + + /* Read fields */ + png_structp pread; /* Used to read a saved file */ + png_infop piread; + png_store_file* current; /* Set when reading */ + png_store_buffer* next; /* Set when reading */ + png_size_t readpos; /* Position in *next */ + png_byte* image; /* Buffer for reading interlaced images */ + png_size_t cb_image; /* Size of this buffer */ + png_size_t cb_row; /* Row size of the image(s) */ + png_uint_32 image_h; /* Number of rows in a single image */ + store_pool read_memory_pool; + + /* Write fields */ + png_store_file* saved; + png_structp pwrite; /* Used when writing a new file */ + png_infop piwrite; + png_size_t writepos; /* Position in .new */ + char wname[FILE_NAME_SIZE]; + png_store_buffer new; /* The end of the new PNG file being written. */ + store_pool write_memory_pool; + store_palette_entry* palette; + int npalette; +} png_store; + +/* Initialization and cleanup */ +static void +store_pool_mark(png_bytep mark) +{ + static png_uint_32 store_seed[2] = { 0x12345678, 1}; + + make_four_random_bytes(store_seed, mark); +} + +#ifdef PNG_READ_TRANSFORMS_SUPPORTED +/* Use this for random 32 bit values; this function makes sure the result is + * non-zero. + */ +static png_uint_32 +random_32(void) +{ + + for (;;) + { + png_byte mark[4]; + png_uint_32 result; + + store_pool_mark(mark); + result = png_get_uint_32(mark); + + if (result != 0) + return result; + } +} +#endif /* PNG_READ_SUPPORTED */ + +static void +store_pool_init(png_store *ps, store_pool *pool) +{ + memset(pool, 0, sizeof *pool); + + pool->store = ps; + pool->list = NULL; + pool->max = pool->current = pool->limit = pool->total = 0; + pool->max_max = pool->max_limit = pool->max_total = 0; + store_pool_mark(pool->mark); +} + +static void +store_init(png_store* ps) +{ + memset(ps, 0, sizeof *ps); + init_exception_context(&ps->exception_context); + store_pool_init(ps, &ps->read_memory_pool); + store_pool_init(ps, &ps->write_memory_pool); + ps->verbose = 0; + ps->treat_warnings_as_errors = 0; + ps->expect_error = 0; + ps->expect_warning = 0; + ps->saw_warning = 0; + ps->speed = 0; + ps->progressive = 0; + ps->validated = 0; + ps->nerrors = ps->nwarnings = 0; + ps->pread = NULL; + ps->piread = NULL; + ps->saved = ps->current = NULL; + ps->next = NULL; + ps->readpos = 0; + ps->image = NULL; + ps->cb_image = 0; + ps->cb_row = 0; + ps->image_h = 0; + ps->pwrite = NULL; + ps->piwrite = NULL; + ps->writepos = 0; + ps->new.prev = NULL; + ps->palette = NULL; + ps->npalette = 0; + ps->noptions = 0; +} + +static void +store_freebuffer(png_store_buffer* psb) +{ + if (psb->prev) + { + store_freebuffer(psb->prev); + free(psb->prev); + psb->prev = NULL; + } +} + +static void +store_freenew(png_store *ps) +{ + store_freebuffer(&ps->new); + ps->writepos = 0; + if (ps->palette != NULL) + { + free(ps->palette); + ps->palette = NULL; + ps->npalette = 0; + } +} + +static void +store_storenew(png_store *ps) +{ + png_store_buffer *pb; + + if (ps->writepos != STORE_BUFFER_SIZE) + png_error(ps->pwrite, "invalid store call"); + + pb = voidcast(png_store_buffer*, malloc(sizeof *pb)); + + if (pb == NULL) + png_error(ps->pwrite, "store new: OOM"); + + *pb = ps->new; + ps->new.prev = pb; + ps->writepos = 0; +} + +static void +store_freefile(png_store_file **ppf) +{ + if (*ppf != NULL) + { + store_freefile(&(*ppf)->next); + + store_freebuffer(&(*ppf)->data); + (*ppf)->datacount = 0; + if ((*ppf)->palette != NULL) + { + free((*ppf)->palette); + (*ppf)->palette = NULL; + (*ppf)->npalette = 0; + } + free(*ppf); + *ppf = NULL; + } +} + +/* Main interface to file storeage, after writing a new PNG file (see the API + * below) call store_storefile to store the result with the given name and id. + */ +static void +store_storefile(png_store *ps, png_uint_32 id) +{ + png_store_file *pf = voidcast(png_store_file*, malloc(sizeof *pf)); + if (pf == NULL) + png_error(ps->pwrite, "storefile: OOM"); + safecat(pf->name, sizeof pf->name, 0, ps->wname); + pf->id = id; + pf->data = ps->new; + pf->datacount = ps->writepos; + ps->new.prev = NULL; + ps->writepos = 0; + pf->palette = ps->palette; + pf->npalette = ps->npalette; + ps->palette = 0; + ps->npalette = 0; + + /* And save it. */ + pf->next = ps->saved; + ps->saved = pf; +} + +/* Generate an error message (in the given buffer) */ +static size_t +store_message(png_store *ps, png_const_structp pp, char *buffer, size_t bufsize, + size_t pos, const char *msg) +{ + if (pp != NULL && pp == ps->pread) + { + /* Reading a file */ + pos = safecat(buffer, bufsize, pos, "read: "); + + if (ps->current != NULL) + { + pos = safecat(buffer, bufsize, pos, ps->current->name); + pos = safecat(buffer, bufsize, pos, sep); + } + } + + else if (pp != NULL && pp == ps->pwrite) + { + /* Writing a file */ + pos = safecat(buffer, bufsize, pos, "write: "); + pos = safecat(buffer, bufsize, pos, ps->wname); + pos = safecat(buffer, bufsize, pos, sep); + } + + else + { + /* Neither reading nor writing (or a memory error in struct delete) */ + pos = safecat(buffer, bufsize, pos, "pngvalid: "); + } + + if (ps->test[0] != 0) + { + pos = safecat(buffer, bufsize, pos, ps->test); + pos = safecat(buffer, bufsize, pos, sep); + } + pos = safecat(buffer, bufsize, pos, msg); + return pos; +} + +/* Verbose output to the error stream: */ +static void +store_verbose(png_store *ps, png_const_structp pp, png_const_charp prefix, + png_const_charp message) +{ + char buffer[512]; + + if (prefix) + fputs(prefix, stderr); + + (void)store_message(ps, pp, buffer, sizeof buffer, 0, message); + fputs(buffer, stderr); + fputc('\n', stderr); +} + +/* Log an error or warning - the relevant count is always incremented. */ +static void +store_log(png_store* ps, png_const_structp pp, png_const_charp message, + int is_error) +{ + /* The warning is copied to the error buffer if there are no errors and it is + * the first warning. The error is copied to the error buffer if it is the + * first error (overwriting any prior warnings). + */ + if (is_error ? (ps->nerrors)++ == 0 : + (ps->nwarnings)++ == 0 && ps->nerrors == 0) + store_message(ps, pp, ps->error, sizeof ps->error, 0, message); + + if (ps->verbose) + store_verbose(ps, pp, is_error ? "error: " : "warning: ", message); +} + +#ifdef PNG_READ_SUPPORTED +/* Internal error function, called with a png_store but no libpng stuff. */ +static void +internal_error(png_store *ps, png_const_charp message) +{ + store_log(ps, NULL, message, 1 /* error */); + + /* And finally throw an exception. */ + { + struct exception_context *the_exception_context = &ps->exception_context; + Throw ps; + } +} +#endif /* PNG_READ_SUPPORTED */ + +/* Functions to use as PNG callbacks. */ +static void PNGCBAPI +store_error(png_structp ppIn, png_const_charp message) /* PNG_NORETURN */ +{ + png_const_structp pp = ppIn; + png_store *ps = voidcast(png_store*, png_get_error_ptr(pp)); + + if (!ps->expect_error) + store_log(ps, pp, message, 1 /* error */); + + /* And finally throw an exception. */ + { + struct exception_context *the_exception_context = &ps->exception_context; + Throw ps; + } +} + +static void PNGCBAPI +store_warning(png_structp ppIn, png_const_charp message) +{ + png_const_structp pp = ppIn; + png_store *ps = voidcast(png_store*, png_get_error_ptr(pp)); + + if (!ps->expect_warning) + store_log(ps, pp, message, 0 /* warning */); + else + ps->saw_warning = 1; +} + +/* These somewhat odd functions are used when reading an image to ensure that + * the buffer is big enough, the png_structp is for errors. + */ +/* Return a single row from the correct image. */ +static png_bytep +store_image_row(const png_store* ps, png_const_structp pp, int nImage, + png_uint_32 y) +{ + png_size_t coffset = (nImage * ps->image_h + y) * (ps->cb_row + 5) + 2; + + if (ps->image == NULL) + png_error(pp, "no allocated image"); + + if (coffset + ps->cb_row + 3 > ps->cb_image) + png_error(pp, "image too small"); + + return ps->image + coffset; +} + +static void +store_image_free(png_store *ps, png_const_structp pp) +{ + if (ps->image != NULL) + { + png_bytep image = ps->image; + + if (image[-1] != 0xed || image[ps->cb_image] != 0xfe) + { + if (pp != NULL) + png_error(pp, "png_store image overwrite (1)"); + else + store_log(ps, NULL, "png_store image overwrite (2)", 1); + } + + ps->image = NULL; + ps->cb_image = 0; + --image; + free(image); + } +} + +static void +store_ensure_image(png_store *ps, png_const_structp pp, int nImages, + png_size_t cbRow, png_uint_32 cRows) +{ + png_size_t cb = nImages * cRows * (cbRow + 5); + + if (ps->cb_image < cb) + { + png_bytep image; + + store_image_free(ps, pp); + + /* The buffer is deliberately mis-aligned. */ + image = voidcast(png_bytep, malloc(cb+2)); + if (image == NULL) + { + /* Called from the startup - ignore the error for the moment. */ + if (pp == NULL) + return; + + png_error(pp, "OOM allocating image buffer"); + } + + /* These magic tags are used to detect overwrites above. */ + ++image; + image[-1] = 0xed; + image[cb] = 0xfe; + + ps->image = image; + ps->cb_image = cb; + } + + /* We have an adequate sized image; lay out the rows. There are 2 bytes at + * the start and three at the end of each (this ensures that the row + * alignment starts out odd - 2+1 and changes for larger images on each row.) + */ + ps->cb_row = cbRow; + ps->image_h = cRows; + + /* For error checking, the whole buffer is set to 10110010 (0xb2 - 178). + * This deliberately doesn't match the bits in the size test image which are + * outside the image; these are set to 0xff (all 1). To make the row + * comparison work in the 'size' test case the size rows are pre-initialized + * to the same value prior to calling 'standard_row'. + */ + memset(ps->image, 178, cb); + + /* Then put in the marks. */ + while (--nImages >= 0) + { + png_uint_32 y; + + for (y=0; yimage; + + if (image[-1] != 0xed || image[ps->cb_image] != 0xfe) + png_error(pp, "image overwrite"); + else + { + png_size_t cbRow = ps->cb_row; + png_uint_32 rows = ps->image_h; + + image += iImage * (cbRow+5) * ps->image_h; + + image += 2; /* skip image first row markers */ + + while (rows-- > 0) + { + if (image[-2] != 190 || image[-1] != 239) + png_error(pp, "row start overwritten"); + + if (image[cbRow] != 222 || image[cbRow+1] != 173 || + image[cbRow+2] != 17) + png_error(pp, "row end overwritten"); + + image += cbRow+5; + } + } +} +#endif /* PNG_READ_SUPPORTED */ + +static void PNGCBAPI +store_write(png_structp ppIn, png_bytep pb, png_size_t st) +{ + png_const_structp pp = ppIn; + png_store *ps = voidcast(png_store*, png_get_io_ptr(pp)); + + if (ps->pwrite != pp) + png_error(pp, "store state damaged"); + + while (st > 0) + { + size_t cb; + + if (ps->writepos >= STORE_BUFFER_SIZE) + store_storenew(ps); + + cb = st; + + if (cb > STORE_BUFFER_SIZE - ps->writepos) + cb = STORE_BUFFER_SIZE - ps->writepos; + + memcpy(ps->new.buffer + ps->writepos, pb, cb); + pb += cb; + st -= cb; + ps->writepos += cb; + } +} + +static void PNGCBAPI +store_flush(png_structp ppIn) +{ + UNUSED(ppIn) /*DOES NOTHING*/ +} + +#ifdef PNG_READ_SUPPORTED +static size_t +store_read_buffer_size(png_store *ps) +{ + /* Return the bytes available for read in the current buffer. */ + if (ps->next != &ps->current->data) + return STORE_BUFFER_SIZE; + + return ps->current->datacount; +} + +#ifdef PNG_READ_TRANSFORMS_SUPPORTED +/* Return total bytes available for read. */ +static size_t +store_read_buffer_avail(png_store *ps) +{ + if (ps->current != NULL && ps->next != NULL) + { + png_store_buffer *next = &ps->current->data; + size_t cbAvail = ps->current->datacount; + + while (next != ps->next && next != NULL) + { + next = next->prev; + cbAvail += STORE_BUFFER_SIZE; + } + + if (next != ps->next) + png_error(ps->pread, "buffer read error"); + + if (cbAvail > ps->readpos) + return cbAvail - ps->readpos; + } + + return 0; +} +#endif + +static int +store_read_buffer_next(png_store *ps) +{ + png_store_buffer *pbOld = ps->next; + png_store_buffer *pbNew = &ps->current->data; + if (pbOld != pbNew) + { + while (pbNew != NULL && pbNew->prev != pbOld) + pbNew = pbNew->prev; + + if (pbNew != NULL) + { + ps->next = pbNew; + ps->readpos = 0; + return 1; + } + + png_error(ps->pread, "buffer lost"); + } + + return 0; /* EOF or error */ +} + +/* Need separate implementation and callback to allow use of the same code + * during progressive read, where the io_ptr is set internally by libpng. + */ +static void +store_read_imp(png_store *ps, png_bytep pb, png_size_t st) +{ + if (ps->current == NULL || ps->next == NULL) + png_error(ps->pread, "store state damaged"); + + while (st > 0) + { + size_t cbAvail = store_read_buffer_size(ps) - ps->readpos; + + if (cbAvail > 0) + { + if (cbAvail > st) cbAvail = st; + memcpy(pb, ps->next->buffer + ps->readpos, cbAvail); + st -= cbAvail; + pb += cbAvail; + ps->readpos += cbAvail; + } + + else if (!store_read_buffer_next(ps)) + png_error(ps->pread, "read beyond end of file"); + } +} + +static void PNGCBAPI +store_read(png_structp ppIn, png_bytep pb, png_size_t st) +{ + png_const_structp pp = ppIn; + png_store *ps = voidcast(png_store*, png_get_io_ptr(pp)); + + if (ps == NULL || ps->pread != pp) + png_error(pp, "bad store read call"); + + store_read_imp(ps, pb, st); +} + +static void +store_progressive_read(png_store *ps, png_structp pp, png_infop pi) +{ + /* Notice that a call to store_read will cause this function to fail because + * readpos will be set. + */ + if (ps->pread != pp || ps->current == NULL || ps->next == NULL) + png_error(pp, "store state damaged (progressive)"); + + do + { + if (ps->readpos != 0) + png_error(pp, "store_read called during progressive read"); + + png_process_data(pp, pi, ps->next->buffer, store_read_buffer_size(ps)); + } + while (store_read_buffer_next(ps)); +} +#endif /* PNG_READ_SUPPORTED */ + +/* The caller must fill this in: */ +static store_palette_entry * +store_write_palette(png_store *ps, int npalette) +{ + if (ps->pwrite == NULL) + store_log(ps, NULL, "attempt to write palette without write stream", 1); + + if (ps->palette != NULL) + png_error(ps->pwrite, "multiple store_write_palette calls"); + + /* This function can only return NULL if called with '0'! */ + if (npalette > 0) + { + ps->palette = voidcast(store_palette_entry*, malloc(npalette * + sizeof *ps->palette)); + + if (ps->palette == NULL) + png_error(ps->pwrite, "store new palette: OOM"); + + ps->npalette = npalette; + } + + return ps->palette; +} + +#ifdef PNG_READ_SUPPORTED +static store_palette_entry * +store_current_palette(png_store *ps, int *npalette) +{ + /* This is an internal error (the call has been made outside a read + * operation.) + */ + if (ps->current == NULL) + { + store_log(ps, ps->pread, "no current stream for palette", 1); + return NULL; + } + + /* The result may be null if there is no palette. */ + *npalette = ps->current->npalette; + return ps->current->palette; +} +#endif /* PNG_READ_SUPPORTED */ + +/***************************** MEMORY MANAGEMENT*** ***************************/ +#ifdef PNG_USER_MEM_SUPPORTED +/* A store_memory is simply the header for an allocated block of memory. The + * pointer returned to libpng is just after the end of the header block, the + * allocated memory is followed by a second copy of the 'mark'. + */ +typedef struct store_memory +{ + store_pool *pool; /* Originating pool */ + struct store_memory *next; /* Singly linked list */ + png_alloc_size_t size; /* Size of memory allocated */ + png_byte mark[4]; /* ID marker */ +} store_memory; + +/* Handle a fatal error in memory allocation. This calls png_error if the + * libpng struct is non-NULL, else it outputs a message and returns. This means + * that a memory problem while libpng is running will abort (png_error) the + * handling of particular file while one in cleanup (after the destroy of the + * struct has returned) will simply keep going and free (or attempt to free) + * all the memory. + */ +static void +store_pool_error(png_store *ps, png_const_structp pp, const char *msg) +{ + if (pp != NULL) + png_error(pp, msg); + + /* Else we have to do it ourselves. png_error eventually calls store_log, + * above. store_log accepts a NULL png_structp - it just changes what gets + * output by store_message. + */ + store_log(ps, pp, msg, 1 /* error */); +} + +static void +store_memory_free(png_const_structp pp, store_pool *pool, store_memory *memory) +{ + /* Note that pp may be NULL (see store_pool_delete below), the caller has + * found 'memory' in pool->list *and* unlinked this entry, so this is a valid + * pointer (for sure), but the contents may have been trashed. + */ + if (memory->pool != pool) + store_pool_error(pool->store, pp, "memory corrupted (pool)"); + + else if (memcmp(memory->mark, pool->mark, sizeof memory->mark) != 0) + store_pool_error(pool->store, pp, "memory corrupted (start)"); + + /* It should be safe to read the size field now. */ + else + { + png_alloc_size_t cb = memory->size; + + if (cb > pool->max) + store_pool_error(pool->store, pp, "memory corrupted (size)"); + + else if (memcmp((png_bytep)(memory+1)+cb, pool->mark, sizeof pool->mark) + != 0) + store_pool_error(pool->store, pp, "memory corrupted (end)"); + + /* Finally give the library a chance to find problems too: */ + else + { + pool->current -= cb; + free(memory); + } + } +} + +static void +store_pool_delete(png_store *ps, store_pool *pool) +{ + if (pool->list != NULL) + { + fprintf(stderr, "%s: %s %s: memory lost (list follows):\n", ps->test, + pool == &ps->read_memory_pool ? "read" : "write", + pool == &ps->read_memory_pool ? (ps->current != NULL ? + ps->current->name : "unknown file") : ps->wname); + ++ps->nerrors; + + do + { + store_memory *next = pool->list; + pool->list = next->next; + next->next = NULL; + + fprintf(stderr, "\t%lu bytes @ %p\n", + (unsigned long)next->size, (const void*)(next+1)); + /* The NULL means this will always return, even if the memory is + * corrupted. + */ + store_memory_free(NULL, pool, next); + } + while (pool->list != NULL); + } + + /* And reset the other fields too for the next time. */ + if (pool->max > pool->max_max) pool->max_max = pool->max; + pool->max = 0; + if (pool->current != 0) /* unexpected internal error */ + fprintf(stderr, "%s: %s %s: memory counter mismatch (internal error)\n", + ps->test, pool == &ps->read_memory_pool ? "read" : "write", + pool == &ps->read_memory_pool ? (ps->current != NULL ? + ps->current->name : "unknown file") : ps->wname); + pool->current = 0; + + if (pool->limit > pool->max_limit) + pool->max_limit = pool->limit; + + pool->limit = 0; + + if (pool->total > pool->max_total) + pool->max_total = pool->total; + + pool->total = 0; + + /* Get a new mark too. */ + store_pool_mark(pool->mark); +} + +/* The memory callbacks: */ +static png_voidp PNGCBAPI +store_malloc(png_structp ppIn, png_alloc_size_t cb) +{ + png_const_structp pp = ppIn; + store_pool *pool = voidcast(store_pool*, png_get_mem_ptr(pp)); + store_memory *new = voidcast(store_memory*, malloc(cb + (sizeof *new) + + (sizeof pool->mark))); + + if (new != NULL) + { + if (cb > pool->max) + pool->max = cb; + + pool->current += cb; + + if (pool->current > pool->limit) + pool->limit = pool->current; + + pool->total += cb; + + new->size = cb; + memcpy(new->mark, pool->mark, sizeof new->mark); + memcpy((png_byte*)(new+1) + cb, pool->mark, sizeof pool->mark); + new->pool = pool; + new->next = pool->list; + pool->list = new; + ++new; + } + + else + { + /* NOTE: the PNG user malloc function cannot use the png_ptr it is passed + * other than to retrieve the allocation pointer! libpng calls the + * store_malloc callback in two basic cases: + * + * 1) From png_malloc; png_malloc will do a png_error itself if NULL is + * returned. + * 2) From png_struct or png_info structure creation; png_malloc is + * to return so cleanup can be performed. + * + * To handle this store_malloc can log a message, but can't do anything + * else. + */ + store_log(pool->store, pp, "out of memory", 1 /* is_error */); + } + + return new; +} + +static void PNGCBAPI +store_free(png_structp ppIn, png_voidp memory) +{ + png_const_structp pp = ppIn; + store_pool *pool = voidcast(store_pool*, png_get_mem_ptr(pp)); + store_memory *this = voidcast(store_memory*, memory), **test; + + /* Because libpng calls store_free with a dummy png_struct when deleting + * png_struct or png_info via png_destroy_struct_2 it is necessary to check + * the passed in png_structp to ensure it is valid, and not pass it to + * png_error if it is not. + */ + if (pp != pool->store->pread && pp != pool->store->pwrite) + pp = NULL; + + /* First check that this 'memory' really is valid memory - it must be in the + * pool list. If it is, use the shared memory_free function to free it. + */ + --this; + for (test = &pool->list; *test != this; test = &(*test)->next) + { + if (*test == NULL) + { + store_pool_error(pool->store, pp, "bad pointer to free"); + return; + } + } + + /* Unlink this entry, *test == this. */ + *test = this->next; + this->next = NULL; + store_memory_free(pp, pool, this); +} +#endif /* PNG_USER_MEM_SUPPORTED */ + +/* Setup functions. */ +/* Cleanup when aborting a write or after storing the new file. */ +static void +store_write_reset(png_store *ps) +{ + if (ps->pwrite != NULL) + { + anon_context(ps); + + Try + png_destroy_write_struct(&ps->pwrite, &ps->piwrite); + + Catch_anonymous + { + /* memory corruption: continue. */ + } + + ps->pwrite = NULL; + ps->piwrite = NULL; + } + + /* And make sure that all the memory has been freed - this will output + * spurious errors in the case of memory corruption above, but this is safe. + */ +# ifdef PNG_USER_MEM_SUPPORTED + store_pool_delete(ps, &ps->write_memory_pool); +# endif + + store_freenew(ps); +} + +/* The following is the main write function, it returns a png_struct and, + * optionally, a png_info suitable for writiing a new PNG file. Use + * store_storefile above to record this file after it has been written. The + * returned libpng structures as destroyed by store_write_reset above. + */ +static png_structp +set_store_for_write(png_store *ps, png_infopp ppi, const char *name) +{ + anon_context(ps); + + Try + { + if (ps->pwrite != NULL) + png_error(ps->pwrite, "write store already in use"); + + store_write_reset(ps); + safecat(ps->wname, sizeof ps->wname, 0, name); + + /* Don't do the slow memory checks if doing a speed test, also if user + * memory is not supported we can't do it anyway. + */ +# ifdef PNG_USER_MEM_SUPPORTED + if (!ps->speed) + ps->pwrite = png_create_write_struct_2(PNG_LIBPNG_VER_STRING, + ps, store_error, store_warning, &ps->write_memory_pool, + store_malloc, store_free); + + else +# endif + ps->pwrite = png_create_write_struct(PNG_LIBPNG_VER_STRING, + ps, store_error, store_warning); + + png_set_write_fn(ps->pwrite, ps, store_write, store_flush); + +# ifdef PNG_SET_OPTION_SUPPORTED + { + int opt; + for (opt=0; optnoptions; ++opt) + if (png_set_option(ps->pwrite, ps->options[opt].option, + ps->options[opt].setting) == PNG_OPTION_INVALID) + png_error(ps->pwrite, "png option invalid"); + } +# endif + + if (ppi != NULL) + *ppi = ps->piwrite = png_create_info_struct(ps->pwrite); + } + + Catch_anonymous + return NULL; + + return ps->pwrite; +} + +/* Cleanup when finished reading (either due to error or in the success case). + * This routine exists even when there is no read support to make the code + * tidier (avoid a mass of ifdefs) and so easier to maintain. + */ +static void +store_read_reset(png_store *ps) +{ +# ifdef PNG_READ_SUPPORTED + if (ps->pread != NULL) + { + anon_context(ps); + + Try + png_destroy_read_struct(&ps->pread, &ps->piread, NULL); + + Catch_anonymous + { + /* error already output: continue */ + } + + ps->pread = NULL; + ps->piread = NULL; + } +# endif + +# ifdef PNG_USER_MEM_SUPPORTED + /* Always do this to be safe. */ + store_pool_delete(ps, &ps->read_memory_pool); +# endif + + ps->current = NULL; + ps->next = NULL; + ps->readpos = 0; + ps->validated = 0; +} + +#ifdef PNG_READ_SUPPORTED +static void +store_read_set(png_store *ps, png_uint_32 id) +{ + png_store_file *pf = ps->saved; + + while (pf != NULL) + { + if (pf->id == id) + { + ps->current = pf; + ps->next = NULL; + store_read_buffer_next(ps); + return; + } + + pf = pf->next; + } + + { + size_t pos; + char msg[FILE_NAME_SIZE+64]; + + pos = standard_name_from_id(msg, sizeof msg, 0, id); + pos = safecat(msg, sizeof msg, pos, ": file not found"); + png_error(ps->pread, msg); + } +} + +/* The main interface for reading a saved file - pass the id number of the file + * to retrieve. Ids must be unique or the earlier file will be hidden. The API + * returns a png_struct and, optionally, a png_info. Both of these will be + * destroyed by store_read_reset above. + */ +static png_structp +set_store_for_read(png_store *ps, png_infopp ppi, png_uint_32 id, + const char *name) +{ + /* Set the name for png_error */ + safecat(ps->test, sizeof ps->test, 0, name); + + if (ps->pread != NULL) + png_error(ps->pread, "read store already in use"); + + store_read_reset(ps); + + /* Both the create APIs can return NULL if used in their default mode + * (because there is no other way of handling an error because the jmp_buf + * by default is stored in png_struct and that has not been allocated!) + * However, given that store_error works correctly in these circumstances + * we don't ever expect NULL in this program. + */ +# ifdef PNG_USER_MEM_SUPPORTED + if (!ps->speed) + ps->pread = png_create_read_struct_2(PNG_LIBPNG_VER_STRING, ps, + store_error, store_warning, &ps->read_memory_pool, store_malloc, + store_free); + + else +# endif + ps->pread = png_create_read_struct(PNG_LIBPNG_VER_STRING, ps, store_error, + store_warning); + + if (ps->pread == NULL) + { + struct exception_context *the_exception_context = &ps->exception_context; + + store_log(ps, NULL, "png_create_read_struct returned NULL (unexpected)", + 1 /*error*/); + + Throw ps; + } + +# ifdef PNG_SET_OPTION_SUPPORTED + { + int opt; + for (opt=0; optnoptions; ++opt) + if (png_set_option(ps->pread, ps->options[opt].option, + ps->options[opt].setting) == PNG_OPTION_INVALID) + png_error(ps->pread, "png option invalid"); + } +# endif + + store_read_set(ps, id); + + if (ppi != NULL) + *ppi = ps->piread = png_create_info_struct(ps->pread); + + return ps->pread; +} +#endif /* PNG_READ_SUPPORTED */ + +/* The overall cleanup of a store simply calls the above then removes all the + * saved files. This does not delete the store itself. + */ +static void +store_delete(png_store *ps) +{ + store_write_reset(ps); + store_read_reset(ps); + store_freefile(&ps->saved); + store_image_free(ps, NULL); +} + +/*********************** PNG FILE MODIFICATION ON READ ************************/ +/* Files may be modified on read. The following structure contains a complete + * png_store together with extra members to handle modification and a special + * read callback for libpng. To use this the 'modifications' field must be set + * to a list of png_modification structures that actually perform the + * modification, otherwise a png_modifier is functionally equivalent to a + * png_store. There is a special read function, set_modifier_for_read, which + * replaces set_store_for_read. + */ +typedef enum modifier_state +{ + modifier_start, /* Initial value */ + modifier_signature, /* Have a signature */ + modifier_IHDR /* Have an IHDR */ +} modifier_state; + +typedef struct CIE_color +{ + /* A single CIE tristimulus value, representing the unique response of a + * standard observer to a variety of light spectra. The observer recognizes + * all spectra that produce this response as the same color, therefore this + * is effectively a description of a color. + */ + double X, Y, Z; +} CIE_color; + +typedef struct color_encoding +{ + /* A description of an (R,G,B) encoding of color (as defined above); this + * includes the actual colors of the (R,G,B) triples (1,0,0), (0,1,0) and + * (0,0,1) plus an encoding value that is used to encode the linear + * components R, G and B to give the actual values R^gamma, G^gamma and + * B^gamma that are stored. + */ + double gamma; /* Encoding (file) gamma of space */ + CIE_color red, green, blue; /* End points */ +} color_encoding; + +#ifdef PNG_READ_SUPPORTED +#if defined PNG_READ_TRANSFORMS_SUPPORTED && defined PNG_READ_cHRM_SUPPORTED +static double +chromaticity_x(CIE_color c) +{ + return c.X / (c.X + c.Y + c.Z); +} + +static double +chromaticity_y(CIE_color c) +{ + return c.Y / (c.X + c.Y + c.Z); +} + +static CIE_color +white_point(const color_encoding *encoding) +{ + CIE_color white; + + white.X = encoding->red.X + encoding->green.X + encoding->blue.X; + white.Y = encoding->red.Y + encoding->green.Y + encoding->blue.Y; + white.Z = encoding->red.Z + encoding->green.Z + encoding->blue.Z; + + return white; +} +#endif /* READ_TRANSFORMS && READ_cHRM */ + +#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED +static void +normalize_color_encoding(color_encoding *encoding) +{ + const double whiteY = encoding->red.Y + encoding->green.Y + + encoding->blue.Y; + + if (whiteY != 1) + { + encoding->red.X /= whiteY; + encoding->red.Y /= whiteY; + encoding->red.Z /= whiteY; + encoding->green.X /= whiteY; + encoding->green.Y /= whiteY; + encoding->green.Z /= whiteY; + encoding->blue.X /= whiteY; + encoding->blue.Y /= whiteY; + encoding->blue.Z /= whiteY; + } +} +#endif + +#ifdef PNG_READ_TRANSFORMS_SUPPORTED +static size_t +safecat_color_encoding(char *buffer, size_t bufsize, size_t pos, + const color_encoding *e, double encoding_gamma) +{ + if (e != 0) + { + if (encoding_gamma != 0) + pos = safecat(buffer, bufsize, pos, "("); + pos = safecat(buffer, bufsize, pos, "R("); + pos = safecatd(buffer, bufsize, pos, e->red.X, 4); + pos = safecat(buffer, bufsize, pos, ","); + pos = safecatd(buffer, bufsize, pos, e->red.Y, 4); + pos = safecat(buffer, bufsize, pos, ","); + pos = safecatd(buffer, bufsize, pos, e->red.Z, 4); + pos = safecat(buffer, bufsize, pos, "),G("); + pos = safecatd(buffer, bufsize, pos, e->green.X, 4); + pos = safecat(buffer, bufsize, pos, ","); + pos = safecatd(buffer, bufsize, pos, e->green.Y, 4); + pos = safecat(buffer, bufsize, pos, ","); + pos = safecatd(buffer, bufsize, pos, e->green.Z, 4); + pos = safecat(buffer, bufsize, pos, "),B("); + pos = safecatd(buffer, bufsize, pos, e->blue.X, 4); + pos = safecat(buffer, bufsize, pos, ","); + pos = safecatd(buffer, bufsize, pos, e->blue.Y, 4); + pos = safecat(buffer, bufsize, pos, ","); + pos = safecatd(buffer, bufsize, pos, e->blue.Z, 4); + pos = safecat(buffer, bufsize, pos, ")"); + if (encoding_gamma != 0) + pos = safecat(buffer, bufsize, pos, ")"); + } + + if (encoding_gamma != 0) + { + pos = safecat(buffer, bufsize, pos, "^"); + pos = safecatd(buffer, bufsize, pos, encoding_gamma, 5); + } + + return pos; +} +#endif /* READ_TRANSFORMS */ +#endif /* PNG_READ_SUPPORTED */ + +typedef struct png_modifier +{ + png_store this; /* I am a png_store */ + struct png_modification *modifications; /* Changes to make */ + + modifier_state state; /* My state */ + + /* Information from IHDR: */ + png_byte bit_depth; /* From IHDR */ + png_byte colour_type; /* From IHDR */ + + /* While handling PLTE, IDAT and IEND these chunks may be pended to allow + * other chunks to be inserted. + */ + png_uint_32 pending_len; + png_uint_32 pending_chunk; + + /* Test values */ + double *gammas; + unsigned int ngammas; + unsigned int ngamma_tests; /* Number of gamma tests to run*/ + double current_gamma; /* 0 if not set */ + const color_encoding *encodings; + unsigned int nencodings; + const color_encoding *current_encoding; /* If an encoding has been set */ + unsigned int encoding_counter; /* For iteration */ + int encoding_ignored; /* Something overwrote it */ + + /* Control variables used to iterate through possible encodings, the + * following must be set to 0 and tested by the function that uses the + * png_modifier because the modifier only sets it to 1 (true.) + */ + unsigned int repeat :1; /* Repeat this transform test. */ + unsigned int test_uses_encoding :1; + + /* Lowest sbit to test (pre-1.7 libpng fails for sbit < 8) */ + png_byte sbitlow; + + /* Error control - these are the limits on errors accepted by the gamma tests + * below. + */ + double maxout8; /* Maximum output value error */ + double maxabs8; /* Absolute sample error 0..1 */ + double maxcalc8; /* Absolute sample error 0..1 */ + double maxpc8; /* Percentage sample error 0..100% */ + double maxout16; /* Maximum output value error */ + double maxabs16; /* Absolute sample error 0..1 */ + double maxcalc16;/* Absolute sample error 0..1 */ + double maxcalcG; /* Absolute sample error 0..1 */ + double maxpc16; /* Percentage sample error 0..100% */ + + /* This is set by transforms that need to allow a higher limit, it is an + * internal check on pngvalid to ensure that the calculated error limits are + * not ridiculous; without this it is too easy to make a mistake in pngvalid + * that allows any value through. + * + * NOTE: this is not checked in release builds. + */ + double limit; /* limit on error values, normally 4E-3 */ + + /* Log limits - values above this are logged, but not necessarily + * warned. + */ + double log8; /* Absolute error in 8 bits to log */ + double log16; /* Absolute error in 16 bits to log */ + + /* Logged 8 and 16 bit errors ('output' values): */ + double error_gray_2; + double error_gray_4; + double error_gray_8; + double error_gray_16; + double error_color_8; + double error_color_16; + double error_indexed; + + /* Flags: */ + /* Whether to call png_read_update_info, not png_read_start_image, and how + * many times to call it. + */ + int use_update_info; + + /* Whether or not to interlace. */ + int interlace_type :9; /* int, but must store '1' */ + + /* Run the standard tests? */ + unsigned int test_standard :1; + + /* Run the odd-sized image and interlace read/write tests? */ + unsigned int test_size :1; + + /* Run tests on reading with a combination of transforms, */ + unsigned int test_transform :1; + unsigned int test_tRNS :1; /* Includes tRNS images */ + + /* When to use the use_input_precision option, this controls the gamma + * validation code checks. If set any value that is within the transformed + * range input-.5 to input+.5 will be accepted, otherwise the value must be + * within the normal limits. It should not be necessary to set this; the + * result should always be exact within the permitted error limits. + */ + unsigned int use_input_precision :1; + unsigned int use_input_precision_sbit :1; + unsigned int use_input_precision_16to8 :1; + + /* If set assume that the calculation bit depth is set by the input + * precision, not the output precision. + */ + unsigned int calculations_use_input_precision :1; + + /* If set assume that the calculations are done in 16 bits even if the sample + * depth is 8 bits. + */ + unsigned int assume_16_bit_calculations :1; + + /* Which gamma tests to run: */ + unsigned int test_gamma_threshold :1; + unsigned int test_gamma_transform :1; /* main tests */ + unsigned int test_gamma_sbit :1; + unsigned int test_gamma_scale16 :1; + unsigned int test_gamma_background :1; + unsigned int test_gamma_alpha_mode :1; + unsigned int test_gamma_expand16 :1; + unsigned int test_exhaustive :1; + + /* Whether or not to run the low-bit-depth grayscale tests. This fails on + * gamma images in some cases because of gross inaccuracies in the grayscale + * gamma handling for low bit depth. + */ + unsigned int test_lbg :1; + unsigned int test_lbg_gamma_threshold :1; + unsigned int test_lbg_gamma_transform :1; + unsigned int test_lbg_gamma_sbit :1; + unsigned int test_lbg_gamma_composition :1; + + unsigned int log :1; /* Log max error */ + + /* Buffer information, the buffer size limits the size of the chunks that can + * be modified - they must fit (including header and CRC) into the buffer! + */ + size_t flush; /* Count of bytes to flush */ + size_t buffer_count; /* Bytes in buffer */ + size_t buffer_position; /* Position in buffer */ + png_byte buffer[1024]; +} png_modifier; + +/* This returns true if the test should be stopped now because it has already + * failed and it is running silently. + */ +static int fail(png_modifier *pm) +{ + return !pm->log && !pm->this.verbose && (pm->this.nerrors > 0 || + (pm->this.treat_warnings_as_errors && pm->this.nwarnings > 0)); +} + +static void +modifier_init(png_modifier *pm) +{ + memset(pm, 0, sizeof *pm); + store_init(&pm->this); + pm->modifications = NULL; + pm->state = modifier_start; + pm->sbitlow = 1U; + pm->ngammas = 0; + pm->ngamma_tests = 0; + pm->gammas = 0; + pm->current_gamma = 0; + pm->encodings = 0; + pm->nencodings = 0; + pm->current_encoding = 0; + pm->encoding_counter = 0; + pm->encoding_ignored = 0; + pm->repeat = 0; + pm->test_uses_encoding = 0; + pm->maxout8 = pm->maxpc8 = pm->maxabs8 = pm->maxcalc8 = 0; + pm->maxout16 = pm->maxpc16 = pm->maxabs16 = pm->maxcalc16 = 0; + pm->maxcalcG = 0; + pm->limit = 4E-3; + pm->log8 = pm->log16 = 0; /* Means 'off' */ + pm->error_gray_2 = pm->error_gray_4 = pm->error_gray_8 = 0; + pm->error_gray_16 = pm->error_color_8 = pm->error_color_16 = 0; + pm->error_indexed = 0; + pm->use_update_info = 0; + pm->interlace_type = PNG_INTERLACE_NONE; + pm->test_standard = 0; + pm->test_size = 0; + pm->test_transform = 0; +# ifdef PNG_WRITE_tRNS_SUPPORTED + pm->test_tRNS = 1; +# else + pm->test_tRNS = 0; +# endif + pm->use_input_precision = 0; + pm->use_input_precision_sbit = 0; + pm->use_input_precision_16to8 = 0; + pm->calculations_use_input_precision = 0; + pm->assume_16_bit_calculations = 0; + pm->test_gamma_threshold = 0; + pm->test_gamma_transform = 0; + pm->test_gamma_sbit = 0; + pm->test_gamma_scale16 = 0; + pm->test_gamma_background = 0; + pm->test_gamma_alpha_mode = 0; + pm->test_gamma_expand16 = 0; + pm->test_lbg = 1; + pm->test_lbg_gamma_threshold = 1; + pm->test_lbg_gamma_transform = 1; + pm->test_lbg_gamma_sbit = 1; + pm->test_lbg_gamma_composition = 1; + pm->test_exhaustive = 0; + pm->log = 0; + + /* Rely on the memset for all the other fields - there are no pointers */ +} + +#ifdef PNG_READ_TRANSFORMS_SUPPORTED + +/* This controls use of checks that explicitly know how libpng digitizes the + * samples in calculations; setting this circumvents simple error limit checking + * in the rgb_to_gray check, replacing it with an exact copy of the libpng 1.5 + * algorithm. + */ +#define DIGITIZE PNG_LIBPNG_VER < 10700 + +/* If pm->calculations_use_input_precision is set then operations will happen + * with the precision of the input, not the precision of the output depth. + * + * If pm->assume_16_bit_calculations is set then even 8 bit calculations use 16 + * bit precision. This only affects those of the following limits that pertain + * to a calculation - not a digitization operation - unless the following API is + * called directly. + */ +#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED +#if DIGITIZE +static double digitize(double value, int depth, int do_round) +{ + /* 'value' is in the range 0 to 1, the result is the same value rounded to a + * multiple of the digitization factor - 8 or 16 bits depending on both the + * sample depth and the 'assume' setting. Digitization is normally by + * rounding and 'do_round' should be 1, if it is 0 the digitized value will + * be truncated. + */ + const unsigned int digitization_factor = (1U << depth) -1; + + /* Limiting the range is done as a convenience to the caller - it's easier to + * do it once here than every time at the call site. + */ + if (value <= 0) + value = 0; + + else if (value >= 1) + value = 1; + + value *= digitization_factor; + if (do_round) value += .5; + return floor(value)/digitization_factor; +} +#endif +#endif /* RGB_TO_GRAY */ + +#ifdef PNG_READ_GAMMA_SUPPORTED +static double abserr(const png_modifier *pm, int in_depth, int out_depth) +{ + /* Absolute error permitted in linear values - affected by the bit depth of + * the calculations. + */ + if (pm->assume_16_bit_calculations || + (pm->calculations_use_input_precision ? in_depth : out_depth) == 16) + return pm->maxabs16; + else + return pm->maxabs8; +} + +static double calcerr(const png_modifier *pm, int in_depth, int out_depth) +{ + /* Error in the linear composition arithmetic - only relevant when + * composition actually happens (0 < alpha < 1). + */ + if ((pm->calculations_use_input_precision ? in_depth : out_depth) == 16) + return pm->maxcalc16; + else if (pm->assume_16_bit_calculations) + return pm->maxcalcG; + else + return pm->maxcalc8; +} + +static double pcerr(const png_modifier *pm, int in_depth, int out_depth) +{ + /* Percentage error permitted in the linear values. Note that the specified + * value is a percentage but this routine returns a simple number. + */ + if (pm->assume_16_bit_calculations || + (pm->calculations_use_input_precision ? in_depth : out_depth) == 16) + return pm->maxpc16 * .01; + else + return pm->maxpc8 * .01; +} + +/* Output error - the error in the encoded value. This is determined by the + * digitization of the output so can be +/-0.5 in the actual output value. In + * the expand_16 case with the current code in libpng the expand happens after + * all the calculations are done in 8 bit arithmetic, so even though the output + * depth is 16 the output error is determined by the 8 bit calculation. + * + * This limit is not determined by the bit depth of internal calculations. + * + * The specified parameter does *not* include the base .5 digitization error but + * it is added here. + */ +static double outerr(const png_modifier *pm, int in_depth, int out_depth) +{ + /* There is a serious error in the 2 and 4 bit grayscale transform because + * the gamma table value (8 bits) is simply shifted, not rounded, so the + * error in 4 bit grayscale gamma is up to the value below. This is a hack + * to allow pngvalid to succeed: + * + * TODO: fix this in libpng + */ + if (out_depth == 2) + return .73182-.5; + + if (out_depth == 4) + return .90644-.5; + + if ((pm->calculations_use_input_precision ? in_depth : out_depth) == 16) + return pm->maxout16; + + /* This is the case where the value was calculated at 8-bit precision then + * scaled to 16 bits. + */ + else if (out_depth == 16) + return pm->maxout8 * 257; + + else + return pm->maxout8; +} + +/* This does the same thing as the above however it returns the value to log, + * rather than raising a warning. This is useful for debugging to track down + * exactly what set of parameters cause high error values. + */ +static double outlog(const png_modifier *pm, int in_depth, int out_depth) +{ + /* The command line parameters are either 8 bit (0..255) or 16 bit (0..65535) + * and so must be adjusted for low bit depth grayscale: + */ + if (out_depth <= 8) + { + if (pm->log8 == 0) /* switched off */ + return 256; + + if (out_depth < 8) + return pm->log8 / 255 * ((1<log8; + } + + if ((pm->calculations_use_input_precision ? in_depth : out_depth) == 16) + { + if (pm->log16 == 0) + return 65536; + + return pm->log16; + } + + /* This is the case where the value was calculated at 8-bit precision then + * scaled to 16 bits. + */ + if (pm->log8 == 0) + return 65536; + + return pm->log8 * 257; +} + +/* This complements the above by providing the appropriate quantization for the + * final value. Normally this would just be quantization to an integral value, + * but in the 8 bit calculation case it's actually quantization to a multiple of + * 257! + */ +static int output_quantization_factor(const png_modifier *pm, int in_depth, + int out_depth) +{ + if (out_depth == 16 && in_depth != 16 && + pm->calculations_use_input_precision) + return 257; + else + return 1; +} +#endif /* PNG_READ_GAMMA_SUPPORTED */ + +/* One modification structure must be provided for each chunk to be modified (in + * fact more than one can be provided if multiple separate changes are desired + * for a single chunk.) Modifications include adding a new chunk when a + * suitable chunk does not exist. + * + * The caller of modify_fn will reset the CRC of the chunk and record 'modified' + * or 'added' as appropriate if the modify_fn returns 1 (true). If the + * modify_fn is NULL the chunk is simply removed. + */ +typedef struct png_modification +{ + struct png_modification *next; + png_uint_32 chunk; + + /* If the following is NULL all matching chunks will be removed: */ + int (*modify_fn)(struct png_modifier *pm, + struct png_modification *me, int add); + + /* If the following is set to PLTE, IDAT or IEND and the chunk has not been + * found and modified (and there is a modify_fn) the modify_fn will be called + * to add the chunk before the relevant chunk. + */ + png_uint_32 add; + unsigned int modified :1; /* Chunk was modified */ + unsigned int added :1; /* Chunk was added */ + unsigned int removed :1; /* Chunk was removed */ +} png_modification; + +static void +modification_reset(png_modification *pmm) +{ + if (pmm != NULL) + { + pmm->modified = 0; + pmm->added = 0; + pmm->removed = 0; + modification_reset(pmm->next); + } +} + +static void +modification_init(png_modification *pmm) +{ + memset(pmm, 0, sizeof *pmm); + pmm->next = NULL; + pmm->chunk = 0; + pmm->modify_fn = NULL; + pmm->add = 0; + modification_reset(pmm); +} + +#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED +static void +modifier_current_encoding(const png_modifier *pm, color_encoding *ce) +{ + if (pm->current_encoding != 0) + *ce = *pm->current_encoding; + + else + memset(ce, 0, sizeof *ce); + + ce->gamma = pm->current_gamma; +} +#endif + +#ifdef PNG_READ_TRANSFORMS_SUPPORTED +static size_t +safecat_current_encoding(char *buffer, size_t bufsize, size_t pos, + const png_modifier *pm) +{ + pos = safecat_color_encoding(buffer, bufsize, pos, pm->current_encoding, + pm->current_gamma); + + if (pm->encoding_ignored) + pos = safecat(buffer, bufsize, pos, "[overridden]"); + + return pos; +} +#endif + +/* Iterate through the usefully testable color encodings. An encoding is one + * of: + * + * 1) Nothing (no color space, no gamma). + * 2) Just a gamma value from the gamma array (including 1.0) + * 3) A color space from the encodings array with the corresponding gamma. + * 4) The same, but with gamma 1.0 (only really useful with 16 bit calculations) + * + * The iterator selects these in turn, the randomizer selects one at random, + * which is used depends on the setting of the 'test_exhaustive' flag. Notice + * that this function changes the colour space encoding so it must only be + * called on completion of the previous test. This is what 'modifier_reset' + * does, below. + * + * After the function has been called the 'repeat' flag will still be set; the + * caller of modifier_reset must reset it at the start of each run of the test! + */ +static unsigned int +modifier_total_encodings(const png_modifier *pm) +{ + return 1 + /* (1) nothing */ + pm->ngammas + /* (2) gamma values to test */ + pm->nencodings + /* (3) total number of encodings */ + /* The following test only works after the first time through the + * png_modifier code because 'bit_depth' is set when the IHDR is read. + * modifier_reset, below, preserves the setting until after it has called + * the iterate function (also below.) + * + * For this reason do not rely on this function outside a call to + * modifier_reset. + */ + ((pm->bit_depth == 16 || pm->assume_16_bit_calculations) ? + pm->nencodings : 0); /* (4) encodings with gamma == 1.0 */ +} + +static void +modifier_encoding_iterate(png_modifier *pm) +{ + if (!pm->repeat && /* Else something needs the current encoding again. */ + pm->test_uses_encoding) /* Some transform is encoding dependent */ + { + if (pm->test_exhaustive) + { + if (++pm->encoding_counter >= modifier_total_encodings(pm)) + pm->encoding_counter = 0; /* This will stop the repeat */ + } + + else + { + /* Not exhaustive - choose an encoding at random; generate a number in + * the range 1..(max-1), so the result is always non-zero: + */ + if (pm->encoding_counter == 0) + pm->encoding_counter = random_mod(modifier_total_encodings(pm)-1)+1; + else + pm->encoding_counter = 0; + } + + if (pm->encoding_counter > 0) + pm->repeat = 1; + } + + else if (!pm->repeat) + pm->encoding_counter = 0; +} + +static void +modifier_reset(png_modifier *pm) +{ + store_read_reset(&pm->this); + pm->limit = 4E-3; + pm->pending_len = pm->pending_chunk = 0; + pm->flush = pm->buffer_count = pm->buffer_position = 0; + pm->modifications = NULL; + pm->state = modifier_start; + modifier_encoding_iterate(pm); + /* The following must be set in the next run. In particular + * test_uses_encodings must be set in the _ini function of each transform + * that looks at the encodings. (Not the 'add' function!) + */ + pm->test_uses_encoding = 0; + pm->current_gamma = 0; + pm->current_encoding = 0; + pm->encoding_ignored = 0; + /* These only become value after IHDR is read: */ + pm->bit_depth = pm->colour_type = 0; +} + +/* The following must be called before anything else to get the encoding set up + * on the modifier. In particular it must be called before the transform init + * functions are called. + */ +static void +modifier_set_encoding(png_modifier *pm) +{ + /* Set the encoding to the one specified by the current encoding counter, + * first clear out all the settings - this corresponds to an encoding_counter + * of 0. + */ + pm->current_gamma = 0; + pm->current_encoding = 0; + pm->encoding_ignored = 0; /* not ignored yet - happens in _ini functions. */ + + /* Now, if required, set the gamma and encoding fields. */ + if (pm->encoding_counter > 0) + { + /* The gammas[] array is an array of screen gammas, not encoding gammas, + * so we need the inverse: + */ + if (pm->encoding_counter <= pm->ngammas) + pm->current_gamma = 1/pm->gammas[pm->encoding_counter-1]; + + else + { + unsigned int i = pm->encoding_counter - pm->ngammas; + + if (i >= pm->nencodings) + { + i %= pm->nencodings; + pm->current_gamma = 1; /* Linear, only in the 16 bit case */ + } + + else + pm->current_gamma = pm->encodings[i].gamma; + + pm->current_encoding = pm->encodings + i; + } + } +} + +/* Enquiry functions to find out what is set. Notice that there is an implicit + * assumption below that the first encoding in the list is the one for sRGB. + */ +static int +modifier_color_encoding_is_sRGB(const png_modifier *pm) +{ + return pm->current_encoding != 0 && pm->current_encoding == pm->encodings && + pm->current_encoding->gamma == pm->current_gamma; +} + +static int +modifier_color_encoding_is_set(const png_modifier *pm) +{ + return pm->current_gamma != 0; +} + +/* Convenience macros. */ +#define CHUNK(a,b,c,d) (((a)<<24)+((b)<<16)+((c)<<8)+(d)) +#define CHUNK_IHDR CHUNK(73,72,68,82) +#define CHUNK_PLTE CHUNK(80,76,84,69) +#define CHUNK_IDAT CHUNK(73,68,65,84) +#define CHUNK_IEND CHUNK(73,69,78,68) +#define CHUNK_cHRM CHUNK(99,72,82,77) +#define CHUNK_gAMA CHUNK(103,65,77,65) +#define CHUNK_sBIT CHUNK(115,66,73,84) +#define CHUNK_sRGB CHUNK(115,82,71,66) + +/* The guts of modification are performed during a read. */ +static void +modifier_crc(png_bytep buffer) +{ + /* Recalculate the chunk CRC - a complete chunk must be in + * the buffer, at the start. + */ + uInt datalen = png_get_uint_32(buffer); + uLong crc = crc32(0, buffer+4, datalen+4); + /* The cast to png_uint_32 is safe because a crc32 is always a 32 bit value. + */ + png_save_uint_32(buffer+datalen+8, (png_uint_32)crc); +} + +static void +modifier_setbuffer(png_modifier *pm) +{ + modifier_crc(pm->buffer); + pm->buffer_count = png_get_uint_32(pm->buffer)+12; + pm->buffer_position = 0; +} + +/* Separate the callback into the actual implementation (which is passed the + * png_modifier explicitly) and the callback, which gets the modifier from the + * png_struct. + */ +static void +modifier_read_imp(png_modifier *pm, png_bytep pb, png_size_t st) +{ + while (st > 0) + { + size_t cb; + png_uint_32 len, chunk; + png_modification *mod; + + if (pm->buffer_position >= pm->buffer_count) switch (pm->state) + { + static png_byte sign[8] = { 137, 80, 78, 71, 13, 10, 26, 10 }; + case modifier_start: + store_read_imp(&pm->this, pm->buffer, 8); /* size of signature. */ + pm->buffer_count = 8; + pm->buffer_position = 0; + + if (memcmp(pm->buffer, sign, 8) != 0) + png_error(pm->this.pread, "invalid PNG file signature"); + pm->state = modifier_signature; + break; + + case modifier_signature: + store_read_imp(&pm->this, pm->buffer, 13+12); /* size of IHDR */ + pm->buffer_count = 13+12; + pm->buffer_position = 0; + + if (png_get_uint_32(pm->buffer) != 13 || + png_get_uint_32(pm->buffer+4) != CHUNK_IHDR) + png_error(pm->this.pread, "invalid IHDR"); + + /* Check the list of modifiers for modifications to the IHDR. */ + mod = pm->modifications; + while (mod != NULL) + { + if (mod->chunk == CHUNK_IHDR && mod->modify_fn && + (*mod->modify_fn)(pm, mod, 0)) + { + mod->modified = 1; + modifier_setbuffer(pm); + } + + /* Ignore removal or add if IHDR! */ + mod = mod->next; + } + + /* Cache information from the IHDR (the modified one.) */ + pm->bit_depth = pm->buffer[8+8]; + pm->colour_type = pm->buffer[8+8+1]; + + pm->state = modifier_IHDR; + pm->flush = 0; + break; + + case modifier_IHDR: + default: + /* Read a new chunk and process it until we see PLTE, IDAT or + * IEND. 'flush' indicates that there is still some data to + * output from the preceding chunk. + */ + if ((cb = pm->flush) > 0) + { + if (cb > st) cb = st; + pm->flush -= cb; + store_read_imp(&pm->this, pb, cb); + pb += cb; + st -= cb; + if (st == 0) return; + } + + /* No more bytes to flush, read a header, or handle a pending + * chunk. + */ + if (pm->pending_chunk != 0) + { + png_save_uint_32(pm->buffer, pm->pending_len); + png_save_uint_32(pm->buffer+4, pm->pending_chunk); + pm->pending_len = 0; + pm->pending_chunk = 0; + } + else + store_read_imp(&pm->this, pm->buffer, 8); + + pm->buffer_count = 8; + pm->buffer_position = 0; + + /* Check for something to modify or a terminator chunk. */ + len = png_get_uint_32(pm->buffer); + chunk = png_get_uint_32(pm->buffer+4); + + /* Terminators first, they may have to be delayed for added + * chunks + */ + if (chunk == CHUNK_PLTE || chunk == CHUNK_IDAT || + chunk == CHUNK_IEND) + { + mod = pm->modifications; + + while (mod != NULL) + { + if ((mod->add == chunk || + (mod->add == CHUNK_PLTE && chunk == CHUNK_IDAT)) && + mod->modify_fn != NULL && !mod->modified && !mod->added) + { + /* Regardless of what the modify function does do not run + * this again. + */ + mod->added = 1; + + if ((*mod->modify_fn)(pm, mod, 1 /*add*/)) + { + /* Reset the CRC on a new chunk */ + if (pm->buffer_count > 0) + modifier_setbuffer(pm); + + else + { + pm->buffer_position = 0; + mod->removed = 1; + } + + /* The buffer has been filled with something (we assume) + * so output this. Pend the current chunk. + */ + pm->pending_len = len; + pm->pending_chunk = chunk; + break; /* out of while */ + } + } + + mod = mod->next; + } + + /* Don't do any further processing if the buffer was modified - + * otherwise the code will end up modifying a chunk that was + * just added. + */ + if (mod != NULL) + break; /* out of switch */ + } + + /* If we get to here then this chunk may need to be modified. To + * do this it must be less than 1024 bytes in total size, otherwise + * it just gets flushed. + */ + if (len+12 <= sizeof pm->buffer) + { + store_read_imp(&pm->this, pm->buffer+pm->buffer_count, + len+12-pm->buffer_count); + pm->buffer_count = len+12; + + /* Check for a modification, else leave it be. */ + mod = pm->modifications; + while (mod != NULL) + { + if (mod->chunk == chunk) + { + if (mod->modify_fn == NULL) + { + /* Remove this chunk */ + pm->buffer_count = pm->buffer_position = 0; + mod->removed = 1; + break; /* Terminate the while loop */ + } + + else if ((*mod->modify_fn)(pm, mod, 0)) + { + mod->modified = 1; + /* The chunk may have been removed: */ + if (pm->buffer_count == 0) + { + pm->buffer_position = 0; + break; + } + modifier_setbuffer(pm); + } + } + + mod = mod->next; + } + } + + else + pm->flush = len+12 - pm->buffer_count; /* data + crc */ + + /* Take the data from the buffer (if there is any). */ + break; + } + + /* Here to read from the modifier buffer (not directly from + * the store, as in the flush case above.) + */ + cb = pm->buffer_count - pm->buffer_position; + + if (cb > st) + cb = st; + + memcpy(pb, pm->buffer + pm->buffer_position, cb); + st -= cb; + pb += cb; + pm->buffer_position += cb; + } +} + +/* The callback: */ +static void PNGCBAPI +modifier_read(png_structp ppIn, png_bytep pb, png_size_t st) +{ + png_const_structp pp = ppIn; + png_modifier *pm = voidcast(png_modifier*, png_get_io_ptr(pp)); + + if (pm == NULL || pm->this.pread != pp) + png_error(pp, "bad modifier_read call"); + + modifier_read_imp(pm, pb, st); +} + +/* Like store_progressive_read but the data is getting changed as we go so we + * need a local buffer. + */ +static void +modifier_progressive_read(png_modifier *pm, png_structp pp, png_infop pi) +{ + if (pm->this.pread != pp || pm->this.current == NULL || + pm->this.next == NULL) + png_error(pp, "store state damaged (progressive)"); + + /* This is another Horowitz and Hill random noise generator. In this case + * the aim is to stress the progressive reader with truly horrible variable + * buffer sizes in the range 1..500, so a sequence of 9 bit random numbers + * is generated. We could probably just count from 1 to 32767 and get as + * good a result. + */ + for (;;) + { + static png_uint_32 noise = 1; + png_size_t cb, cbAvail; + png_byte buffer[512]; + + /* Generate 15 more bits of stuff: */ + noise = (noise << 9) | ((noise ^ (noise >> (9-5))) & 0x1ff); + cb = noise & 0x1ff; + + /* Check that this number of bytes are available (in the current buffer.) + * (This doesn't quite work - the modifier might delete a chunk; unlikely + * but possible, it doesn't happen at present because the modifier only + * adds chunks to standard images.) + */ + cbAvail = store_read_buffer_avail(&pm->this); + if (pm->buffer_count > pm->buffer_position) + cbAvail += pm->buffer_count - pm->buffer_position; + + if (cb > cbAvail) + { + /* Check for EOF: */ + if (cbAvail == 0) + break; + + cb = cbAvail; + } + + modifier_read_imp(pm, buffer, cb); + png_process_data(pp, pi, buffer, cb); + } + + /* Check the invariants at the end (if this fails it's a problem in this + * file!) + */ + if (pm->buffer_count > pm->buffer_position || + pm->this.next != &pm->this.current->data || + pm->this.readpos < pm->this.current->datacount) + png_error(pp, "progressive read implementation error"); +} + +/* Set up a modifier. */ +static png_structp +set_modifier_for_read(png_modifier *pm, png_infopp ppi, png_uint_32 id, + const char *name) +{ + /* Do this first so that the modifier fields are cleared even if an error + * happens allocating the png_struct. No allocation is done here so no + * cleanup is required. + */ + pm->state = modifier_start; + pm->bit_depth = 0; + pm->colour_type = 255; + + pm->pending_len = 0; + pm->pending_chunk = 0; + pm->flush = 0; + pm->buffer_count = 0; + pm->buffer_position = 0; + + return set_store_for_read(&pm->this, ppi, id, name); +} + + +/******************************** MODIFICATIONS *******************************/ +/* Standard modifications to add chunks. These do not require the _SUPPORTED + * macros because the chunks can be there regardless of whether this specific + * libpng supports them. + */ +typedef struct gama_modification +{ + png_modification this; + png_fixed_point gamma; +} gama_modification; + +static int +gama_modify(png_modifier *pm, png_modification *me, int add) +{ + UNUSED(add) + /* This simply dumps the given gamma value into the buffer. */ + png_save_uint_32(pm->buffer, 4); + png_save_uint_32(pm->buffer+4, CHUNK_gAMA); + png_save_uint_32(pm->buffer+8, ((gama_modification*)me)->gamma); + return 1; +} + +static void +gama_modification_init(gama_modification *me, png_modifier *pm, double gammad) +{ + double g; + + modification_init(&me->this); + me->this.chunk = CHUNK_gAMA; + me->this.modify_fn = gama_modify; + me->this.add = CHUNK_PLTE; + g = fix(gammad); + me->gamma = (png_fixed_point)g; + me->this.next = pm->modifications; + pm->modifications = &me->this; +} + +typedef struct chrm_modification +{ + png_modification this; + const color_encoding *encoding; + png_fixed_point wx, wy, rx, ry, gx, gy, bx, by; +} chrm_modification; + +static int +chrm_modify(png_modifier *pm, png_modification *me, int add) +{ + UNUSED(add) + /* As with gAMA this just adds the required cHRM chunk to the buffer. */ + png_save_uint_32(pm->buffer , 32); + png_save_uint_32(pm->buffer+ 4, CHUNK_cHRM); + png_save_uint_32(pm->buffer+ 8, ((chrm_modification*)me)->wx); + png_save_uint_32(pm->buffer+12, ((chrm_modification*)me)->wy); + png_save_uint_32(pm->buffer+16, ((chrm_modification*)me)->rx); + png_save_uint_32(pm->buffer+20, ((chrm_modification*)me)->ry); + png_save_uint_32(pm->buffer+24, ((chrm_modification*)me)->gx); + png_save_uint_32(pm->buffer+28, ((chrm_modification*)me)->gy); + png_save_uint_32(pm->buffer+32, ((chrm_modification*)me)->bx); + png_save_uint_32(pm->buffer+36, ((chrm_modification*)me)->by); + return 1; +} + +static void +chrm_modification_init(chrm_modification *me, png_modifier *pm, + const color_encoding *encoding) +{ + CIE_color white = white_point(encoding); + + /* Original end points: */ + me->encoding = encoding; + + /* Chromaticities (in fixed point): */ + me->wx = fix(chromaticity_x(white)); + me->wy = fix(chromaticity_y(white)); + + me->rx = fix(chromaticity_x(encoding->red)); + me->ry = fix(chromaticity_y(encoding->red)); + me->gx = fix(chromaticity_x(encoding->green)); + me->gy = fix(chromaticity_y(encoding->green)); + me->bx = fix(chromaticity_x(encoding->blue)); + me->by = fix(chromaticity_y(encoding->blue)); + + modification_init(&me->this); + me->this.chunk = CHUNK_cHRM; + me->this.modify_fn = chrm_modify; + me->this.add = CHUNK_PLTE; + me->this.next = pm->modifications; + pm->modifications = &me->this; +} + +typedef struct srgb_modification +{ + png_modification this; + png_byte intent; +} srgb_modification; + +static int +srgb_modify(png_modifier *pm, png_modification *me, int add) +{ + UNUSED(add) + /* As above, ignore add and just make a new chunk */ + png_save_uint_32(pm->buffer, 1); + png_save_uint_32(pm->buffer+4, CHUNK_sRGB); + pm->buffer[8] = ((srgb_modification*)me)->intent; + return 1; +} + +static void +srgb_modification_init(srgb_modification *me, png_modifier *pm, png_byte intent) +{ + modification_init(&me->this); + me->this.chunk = CHUNK_sBIT; + + if (intent <= 3) /* if valid, else *delete* sRGB chunks */ + { + me->this.modify_fn = srgb_modify; + me->this.add = CHUNK_PLTE; + me->intent = intent; + } + + else + { + me->this.modify_fn = 0; + me->this.add = 0; + me->intent = 0; + } + + me->this.next = pm->modifications; + pm->modifications = &me->this; +} + +#ifdef PNG_READ_GAMMA_SUPPORTED +typedef struct sbit_modification +{ + png_modification this; + png_byte sbit; +} sbit_modification; + +static int +sbit_modify(png_modifier *pm, png_modification *me, int add) +{ + png_byte sbit = ((sbit_modification*)me)->sbit; + if (pm->bit_depth > sbit) + { + int cb = 0; + switch (pm->colour_type) + { + case 0: + cb = 1; + break; + + case 2: + case 3: + cb = 3; + break; + + case 4: + cb = 2; + break; + + case 6: + cb = 4; + break; + + default: + png_error(pm->this.pread, + "unexpected colour type in sBIT modification"); + } + + png_save_uint_32(pm->buffer, cb); + png_save_uint_32(pm->buffer+4, CHUNK_sBIT); + + while (cb > 0) + (pm->buffer+8)[--cb] = sbit; + + return 1; + } + else if (!add) + { + /* Remove the sBIT chunk */ + pm->buffer_count = pm->buffer_position = 0; + return 1; + } + else + return 0; /* do nothing */ +} + +static void +sbit_modification_init(sbit_modification *me, png_modifier *pm, png_byte sbit) +{ + modification_init(&me->this); + me->this.chunk = CHUNK_sBIT; + me->this.modify_fn = sbit_modify; + me->this.add = CHUNK_PLTE; + me->sbit = sbit; + me->this.next = pm->modifications; + pm->modifications = &me->this; +} +#endif /* PNG_READ_GAMMA_SUPPORTED */ +#endif /* PNG_READ_TRANSFORMS_SUPPORTED */ + +/***************************** STANDARD PNG FILES *****************************/ +/* Standard files - write and save standard files. */ +/* There are two basic forms of standard images. Those which attempt to have + * all the possible pixel values (not possible for 16bpp images, but a range of + * values are produced) and those which have a range of image sizes. The former + * are used for testing transforms, in particular gamma correction and bit + * reduction and increase. The latter are reserved for testing the behavior of + * libpng with respect to 'odd' image sizes - particularly small images where + * rows become 1 byte and interlace passes disappear. + * + * The first, most useful, set are the 'transform' images, the second set of + * small images are the 'size' images. + * + * The transform files are constructed with rows which fit into a 1024 byte row + * buffer. This makes allocation easier below. Further regardless of the file + * format every row has 128 pixels (giving 1024 bytes for 64bpp formats). + * + * Files are stored with no gAMA or sBIT chunks, with a PLTE only when needed + * and with an ID derived from the colour type, bit depth and interlace type + * as above (FILEID). The width (128) and height (variable) are not stored in + * the FILEID - instead the fields are set to 0, indicating a transform file. + * + * The size files ar constructed with rows a maximum of 128 bytes wide, allowing + * a maximum width of 16 pixels (for the 64bpp case.) They also have a maximum + * height of 16 rows. The width and height are stored in the FILEID and, being + * non-zero, indicate a size file. + * + * Because the PNG filter code is typically the largest CPU consumer within + * libpng itself there is a tendency to attempt to optimize it. This results in + * special case code which needs to be validated. To cause this to happen the + * 'size' images are made to use each possible filter, in so far as this is + * possible for smaller images. + * + * For palette image (colour type 3) multiple transform images are stored with + * the same bit depth to allow testing of more colour combinations - + * particularly important for testing the gamma code because libpng uses a + * different code path for palette images. For size images a single palette is + * used. + */ + +/* Make a 'standard' palette. Because there are only 256 entries in a palette + * (maximum) this actually makes a random palette in the hope that enough tests + * will catch enough errors. (Note that the same palette isn't produced every + * time for the same test - it depends on what previous tests have been run - + * but a given set of arguments to pngvalid will always produce the same palette + * at the same test! This is why pseudo-random number generators are useful for + * testing.) + * + * The store must be open for write when this is called, otherwise an internal + * error will occur. This routine contains its own magic number seed, so the + * palettes generated don't change if there are intervening errors (changing the + * calls to the store_mark seed.) + */ +static store_palette_entry * +make_standard_palette(png_store* ps, int npalette, int do_tRNS) +{ + static png_uint_32 palette_seed[2] = { 0x87654321, 9 }; + + int i = 0; + png_byte values[256][4]; + + /* Always put in black and white plus the six primary and secondary colors. + */ + for (; i<8; ++i) + { + values[i][1] = (png_byte)((i&1) ? 255U : 0U); + values[i][2] = (png_byte)((i&2) ? 255U : 0U); + values[i][3] = (png_byte)((i&4) ? 255U : 0U); + } + + /* Then add 62 grays (one quarter of the remaining 256 slots). */ + { + int j = 0; + png_byte random_bytes[4]; + png_byte need[256]; + + need[0] = 0; /*got black*/ + memset(need+1, 1, (sizeof need)-2); /*need these*/ + need[255] = 0; /*but not white*/ + + while (i<70) + { + png_byte b; + + if (j==0) + { + make_four_random_bytes(palette_seed, random_bytes); + j = 4; + } + + b = random_bytes[--j]; + if (need[b]) + { + values[i][1] = b; + values[i][2] = b; + values[i++][3] = b; + } + } + } + + /* Finally add 192 colors at random - don't worry about matches to things we + * already have, chance is less than 1/65536. Don't worry about grays, + * chance is the same, so we get a duplicate or extra gray less than 1 time + * in 170. + */ + for (; i<256; ++i) + make_four_random_bytes(palette_seed, values[i]); + + /* Fill in the alpha values in the first byte. Just use all possible values + * (0..255) in an apparently random order: + */ + { + store_palette_entry *palette; + png_byte selector[4]; + + make_four_random_bytes(palette_seed, selector); + + if (do_tRNS) + for (i=0; i<256; ++i) + values[i][0] = (png_byte)(i ^ selector[0]); + + else + for (i=0; i<256; ++i) + values[i][0] = 255; /* no transparency/tRNS chunk */ + + /* 'values' contains 256 ARGB values, but we only need 'npalette'. + * 'npalette' will always be a power of 2: 2, 4, 16 or 256. In the low + * bit depth cases select colors at random, else it is difficult to have + * a set of low bit depth palette test with any chance of a reasonable + * range of colors. Do this by randomly permuting values into the low + * 'npalette' entries using an XOR mask generated here. This also + * permutes the npalette == 256 case in a potentially useful way (there is + * no relationship between palette index and the color value therein!) + */ + palette = store_write_palette(ps, npalette); + + for (i=0; i 0) + png_set_tRNS(pp, pi, tRNS, j, 0/*color*/); +# endif + } +} + +#ifdef PNG_WRITE_tRNS_SUPPORTED +static void +set_random_tRNS(png_structp pp, png_infop pi, const png_byte colour_type, + const int bit_depth) +{ + /* To make this useful the tRNS color needs to match at least one pixel. + * Random values are fine for gray, including the 16-bit case where we know + * that the test image contains all the gray values. For RGB we need more + * method as only 65536 different RGB values are generated. + */ + png_color_16 tRNS; + const png_uint_16 mask = (png_uint_16)((1U << bit_depth)-1); + + R8(tRNS); /* makes unset fields random */ + + if (colour_type & 2/*RGB*/) + { + if (bit_depth == 8) + { + R16(tRNS.red); + R16(tRNS.green); + tRNS.blue = tRNS.red ^ tRNS.green; + tRNS.red &= mask; + tRNS.green &= mask; + tRNS.blue &= mask; + } + + else /* bit_depth == 16 */ + { + R16(tRNS.red); + tRNS.green = (png_uint_16)(tRNS.red * 257); + tRNS.blue = (png_uint_16)(tRNS.green * 17); + } + } + + else + { + R16(tRNS.gray); + tRNS.gray &= mask; + } + + png_set_tRNS(pp, pi, NULL, 0, &tRNS); +} +#endif + +/* The number of passes is related to the interlace type. There was no libpng + * API to determine this prior to 1.5, so we need an inquiry function: + */ +static int +npasses_from_interlace_type(png_const_structp pp, int interlace_type) +{ + switch (interlace_type) + { + default: + png_error(pp, "invalid interlace type"); + + case PNG_INTERLACE_NONE: + return 1; + + case PNG_INTERLACE_ADAM7: + return PNG_INTERLACE_ADAM7_PASSES; + } +} + +static unsigned int +bit_size(png_const_structp pp, png_byte colour_type, png_byte bit_depth) +{ + switch (colour_type) + { + default: png_error(pp, "invalid color type"); + + case 0: return bit_depth; + + case 2: return 3*bit_depth; + + case 3: return bit_depth; + + case 4: return 2*bit_depth; + + case 6: return 4*bit_depth; + } +} + +#define TRANSFORM_WIDTH 128U +#define TRANSFORM_ROWMAX (TRANSFORM_WIDTH*8U) +#define SIZE_ROWMAX (16*8U) /* 16 pixels, max 8 bytes each - 128 bytes */ +#define STANDARD_ROWMAX TRANSFORM_ROWMAX /* The larger of the two */ +#define SIZE_HEIGHTMAX 16 /* Maximum range of size images */ + +static size_t +transform_rowsize(png_const_structp pp, png_byte colour_type, + png_byte bit_depth) +{ + return (TRANSFORM_WIDTH * bit_size(pp, colour_type, bit_depth)) / 8; +} + +/* transform_width(pp, colour_type, bit_depth) current returns the same number + * every time, so just use a macro: + */ +#define transform_width(pp, colour_type, bit_depth) TRANSFORM_WIDTH + +static png_uint_32 +transform_height(png_const_structp pp, png_byte colour_type, png_byte bit_depth) +{ + switch (bit_size(pp, colour_type, bit_depth)) + { + case 1: + case 2: + case 4: + return 1; /* Total of 128 pixels */ + + case 8: + return 2; /* Total of 256 pixels/bytes */ + + case 16: + return 512; /* Total of 65536 pixels */ + + case 24: + case 32: + return 512; /* 65536 pixels */ + + case 48: + case 64: + return 2048;/* 4 x 65536 pixels. */ +# define TRANSFORM_HEIGHTMAX 2048 + + default: + return 0; /* Error, will be caught later */ + } +} + +#ifdef PNG_READ_SUPPORTED +/* The following can only be defined here, now we have the definitions + * of the transform image sizes. + */ +static png_uint_32 +standard_width(png_const_structp pp, png_uint_32 id) +{ + png_uint_32 width = WIDTH_FROM_ID(id); + UNUSED(pp) + + if (width == 0) + width = transform_width(pp, COL_FROM_ID(id), DEPTH_FROM_ID(id)); + + return width; +} + +static png_uint_32 +standard_height(png_const_structp pp, png_uint_32 id) +{ + png_uint_32 height = HEIGHT_FROM_ID(id); + + if (height == 0) + height = transform_height(pp, COL_FROM_ID(id), DEPTH_FROM_ID(id)); + + return height; +} + +static png_uint_32 +standard_rowsize(png_const_structp pp, png_uint_32 id) +{ + png_uint_32 width = standard_width(pp, id); + + /* This won't overflow: */ + width *= bit_size(pp, COL_FROM_ID(id), DEPTH_FROM_ID(id)); + return (width + 7) / 8; +} +#endif /* PNG_READ_SUPPORTED */ + +static void +transform_row(png_const_structp pp, png_byte buffer[TRANSFORM_ROWMAX], + png_byte colour_type, png_byte bit_depth, png_uint_32 y) +{ + png_uint_32 v = y << 7; + png_uint_32 i = 0; + + switch (bit_size(pp, colour_type, bit_depth)) + { + case 1: + while (i<128/8) buffer[i] = (png_byte)(v & 0xff), v += 17, ++i; + return; + + case 2: + while (i<128/4) buffer[i] = (png_byte)(v & 0xff), v += 33, ++i; + return; + + case 4: + while (i<128/2) buffer[i] = (png_byte)(v & 0xff), v += 65, ++i; + return; + + case 8: + /* 256 bytes total, 128 bytes in each row set as follows: */ + while (i<128) buffer[i] = (png_byte)(v & 0xff), ++v, ++i; + return; + + case 16: + /* Generate all 65536 pixel values in order, which includes the 8 bit + * GA case as well as the 16 bit G case. + */ + while (i<128) + { + buffer[2*i] = (png_byte)((v>>8) & 0xff); + buffer[2*i+1] = (png_byte)(v & 0xff); + ++v; + ++i; + } + + return; + + case 24: + /* 65535 pixels, but rotate the values. */ + while (i<128) + { + /* Three bytes per pixel, r, g, b, make b by r^g */ + buffer[3*i+0] = (png_byte)((v >> 8) & 0xff); + buffer[3*i+1] = (png_byte)(v & 0xff); + buffer[3*i+2] = (png_byte)(((v >> 8) ^ v) & 0xff); + ++v; + ++i; + } + + return; + + case 32: + /* 65535 pixels, r, g, b, a; just replicate */ + while (i<128) + { + buffer[4*i+0] = (png_byte)((v >> 8) & 0xff); + buffer[4*i+1] = (png_byte)(v & 0xff); + buffer[4*i+2] = (png_byte)((v >> 8) & 0xff); + buffer[4*i+3] = (png_byte)(v & 0xff); + ++v; + ++i; + } + + return; + + case 48: + /* y is maximum 2047, giving 4x65536 pixels, make 'r' increase by 1 at + * each pixel, g increase by 257 (0x101) and 'b' by 0x1111: + */ + while (i<128) + { + png_uint_32 t = v++; + buffer[6*i+0] = (png_byte)((t >> 8) & 0xff); + buffer[6*i+1] = (png_byte)(t & 0xff); + t *= 257; + buffer[6*i+2] = (png_byte)((t >> 8) & 0xff); + buffer[6*i+3] = (png_byte)(t & 0xff); + t *= 17; + buffer[6*i+4] = (png_byte)((t >> 8) & 0xff); + buffer[6*i+5] = (png_byte)(t & 0xff); + ++i; + } + + return; + + case 64: + /* As above in the 32 bit case. */ + while (i<128) + { + png_uint_32 t = v++; + buffer[8*i+0] = (png_byte)((t >> 8) & 0xff); + buffer[8*i+1] = (png_byte)(t & 0xff); + buffer[8*i+4] = (png_byte)((t >> 8) & 0xff); + buffer[8*i+5] = (png_byte)(t & 0xff); + t *= 257; + buffer[8*i+2] = (png_byte)((t >> 8) & 0xff); + buffer[8*i+3] = (png_byte)(t & 0xff); + buffer[8*i+6] = (png_byte)((t >> 8) & 0xff); + buffer[8*i+7] = (png_byte)(t & 0xff); + ++i; + } + return; + + default: + break; + } + + png_error(pp, "internal error"); +} + +/* This is just to do the right cast - could be changed to a function to check + * 'bd' but there isn't much point. + */ +#define DEPTH(bd) ((png_byte)(1U << (bd))) + +/* This is just a helper for compiling on minimal systems with no write + * interlacing support. If there is no write interlacing we can't generate test + * cases with interlace: + */ +#ifdef PNG_WRITE_INTERLACING_SUPPORTED +# define INTERLACE_LAST PNG_INTERLACE_LAST +# define check_interlace_type(type) ((void)(type)) +# define set_write_interlace_handling(pp,type) png_set_interlace_handling(pp) +# define do_own_interlace 0 +#elif PNG_LIBPNG_VER < 10700 +# define set_write_interlace_handling(pp,type) (1) +static void +check_interlace_type(int const interlace_type) +{ + /* Prior to 1.7.0 libpng does not support the write of an interlaced image + * unless PNG_WRITE_INTERLACING_SUPPORTED, even with do_interlace so the + * code here does the pixel interlace itself, so: + */ + if (interlace_type != PNG_INTERLACE_NONE) + { + /* This is an internal error - --interlace tests should be skipped, not + * attempted. + */ + fprintf(stderr, "pngvalid: no interlace support\n"); + exit(99); + } +} +# define INTERLACE_LAST (PNG_INTERLACE_NONE+1) +# define do_own_interlace 0 +#else /* libpng 1.7+ */ +# define set_write_interlace_handling(pp,type)\ + npasses_from_interlace_type(pp,type) +# define check_interlace_type(type) ((void)(type)) +# define INTERLACE_LAST PNG_INTERLACE_LAST +# define do_own_interlace 1 +#endif /* WRITE_INTERLACING tests */ + +#define CAN_WRITE_INTERLACE\ + PNG_LIBPNG_VER >= 10700 || defined PNG_WRITE_INTERLACING_SUPPORTED + +/* Do the same thing for read interlacing; this controls whether read tests do + * their own de-interlace or use libpng. + */ +#ifdef PNG_READ_INTERLACING_SUPPORTED +# define do_read_interlace 0 +#else /* no libpng read interlace support */ +# define do_read_interlace 1 +#endif +/* The following two routines use the PNG interlace support macros from + * png.h to interlace or deinterlace rows. + */ +static void +interlace_row(png_bytep buffer, png_const_bytep imageRow, + unsigned int pixel_size, png_uint_32 w, int pass, int littleendian) +{ + png_uint_32 xin, xout, xstep; + + /* Note that this can, trivially, be optimized to a memcpy on pass 7, the + * code is presented this way to make it easier to understand. In practice + * consult the code in the libpng source to see other ways of doing this. + * + * It is OK for buffer and imageRow to be identical, because 'xin' moves + * faster than 'xout' and we copy up. + */ + xin = PNG_PASS_START_COL(pass); + xstep = 1U<wname); + text.text = copy; + text.text_length = pos; + text.itxt_length = 0; + text.lang = 0; + text.lang_key = 0; + + png_set_text(pp, pi, &text, 1); + } +#endif + + if (colour_type == 3) /* palette */ + init_standard_palette(ps, pp, pi, 1U << bit_depth, 1/*do tRNS*/); + +# ifdef PNG_WRITE_tRNS_SUPPORTED + else if (palette_number) + set_random_tRNS(pp, pi, colour_type, bit_depth); +# endif + + png_write_info(pp, pi); + + if (png_get_rowbytes(pp, pi) != + transform_rowsize(pp, colour_type, bit_depth)) + png_error(pp, "transform row size incorrect"); + + else + { + /* Somewhat confusingly this must be called *after* png_write_info + * because if it is called before, the information in *pp has not been + * updated to reflect the interlaced image. + */ + int npasses = set_write_interlace_handling(pp, interlace_type); + int pass; + + if (npasses != npasses_from_interlace_type(pp, interlace_type)) + png_error(pp, "write: png_set_interlace_handling failed"); + + for (pass=0; pass 0) + interlace_row(buffer, buffer, + bit_size(pp, colour_type, bit_depth), w, pass, + 0/*data always bigendian*/); + else + continue; + } +# endif /* do_own_interlace */ + + choose_random_filter(pp, pass == 0 && y == 0); + png_write_row(pp, buffer); + } + } + } + +#ifdef PNG_TEXT_SUPPORTED + { + static char key[] = "end marker"; + static char comment[] = "end"; + png_text text; + + /* Use a compressed text string to test the correct interaction of text + * compression and IDAT compression. + */ + text.compression = TEXT_COMPRESSION; + text.key = key; + text.text = comment; + text.text_length = (sizeof comment)-1; + text.itxt_length = 0; + text.lang = 0; + text.lang_key = 0; + + png_set_text(pp, pi, &text, 1); + } +#endif + + png_write_end(pp, pi); + + /* And store this under the appropriate id, then clean up. */ + store_storefile(ps, FILEID(colour_type, bit_depth, palette_number, + interlace_type, 0, 0, 0)); + + store_write_reset(ps); + } + + Catch(fault) + { + /* Use the png_store returned by the exception. This may help the compiler + * because 'ps' is not used in this branch of the setjmp. Note that fault + * and ps will always be the same value. + */ + store_write_reset(fault); + } +} + +static void +make_transform_images(png_modifier *pm) +{ + png_byte colour_type = 0; + png_byte bit_depth = 0; + unsigned int palette_number = 0; + + /* This is in case of errors. */ + safecat(pm->this.test, sizeof pm->this.test, 0, "make standard images"); + + /* Use next_format to enumerate all the combinations we test, including + * generating multiple low bit depth palette images. Non-A images (palette + * and direct) are created with and without tRNS chunks. + */ + while (next_format(&colour_type, &bit_depth, &palette_number, 1, 1)) + { + int interlace_type; + + for (interlace_type = PNG_INTERLACE_NONE; + interlace_type < INTERLACE_LAST; ++interlace_type) + { + char name[FILE_NAME_SIZE]; + + standard_name(name, sizeof name, 0, colour_type, bit_depth, + palette_number, interlace_type, 0, 0, do_own_interlace); + make_transform_image(&pm->this, colour_type, bit_depth, palette_number, + interlace_type, name); + } + } +} + +/* Build a single row for the 'size' test images; this fills in only the + * first bit_width bits of the sample row. + */ +static void +size_row(png_byte buffer[SIZE_ROWMAX], png_uint_32 bit_width, png_uint_32 y) +{ + /* height is in the range 1 to 16, so: */ + y = ((y & 1) << 7) + ((y & 2) << 6) + ((y & 4) << 5) + ((y & 8) << 4); + /* the following ensures bits are set in small images: */ + y ^= 0xA5; + + while (bit_width >= 8) + *buffer++ = (png_byte)y++, bit_width -= 8; + + /* There may be up to 7 remaining bits, these go in the most significant + * bits of the byte. + */ + if (bit_width > 0) + { + png_uint_32 mask = (1U<<(8-bit_width))-1; + *buffer = (png_byte)((*buffer & mask) | (y & ~mask)); + } +} + +static void +make_size_image(png_store* const ps, png_byte const colour_type, + png_byte const bit_depth, int const interlace_type, + png_uint_32 const w, png_uint_32 const h, + int const do_interlace) +{ + context(ps, fault); + + check_interlace_type(interlace_type); + + Try + { + png_infop pi; + png_structp pp; + unsigned int pixel_size; + + /* Make a name and get an appropriate id for the store: */ + char name[FILE_NAME_SIZE]; + const png_uint_32 id = FILEID(colour_type, bit_depth, 0/*palette*/, + interlace_type, w, h, do_interlace); + + standard_name_from_id(name, sizeof name, 0, id); + pp = set_store_for_write(ps, &pi, name); + + /* In the event of a problem return control to the Catch statement below + * to do the clean up - it is not possible to 'return' directly from a Try + * block. + */ + if (pp == NULL) + Throw ps; + + png_set_IHDR(pp, pi, w, h, bit_depth, colour_type, interlace_type, + PNG_COMPRESSION_TYPE_BASE, PNG_FILTER_TYPE_BASE); + +#ifdef PNG_TEXT_SUPPORTED + { + static char key[] = "image name"; /* must be writeable */ + size_t pos; + png_text text; + char copy[FILE_NAME_SIZE]; + + /* Use a compressed text string to test the correct interaction of text + * compression and IDAT compression. + */ + text.compression = TEXT_COMPRESSION; + text.key = key; + /* Yuck: the text must be writable! */ + pos = safecat(copy, sizeof copy, 0, ps->wname); + text.text = copy; + text.text_length = pos; + text.itxt_length = 0; + text.lang = 0; + text.lang_key = 0; + + png_set_text(pp, pi, &text, 1); + } +#endif + + if (colour_type == 3) /* palette */ + init_standard_palette(ps, pp, pi, 1U << bit_depth, 0/*do tRNS*/); + + png_write_info(pp, pi); + + /* Calculate the bit size, divide by 8 to get the byte size - this won't + * overflow because we know the w values are all small enough even for + * a system where 'unsigned int' is only 16 bits. + */ + pixel_size = bit_size(pp, colour_type, bit_depth); + if (png_get_rowbytes(pp, pi) != ((w * pixel_size) + 7) / 8) + png_error(pp, "size row size incorrect"); + + else + { + int npasses = npasses_from_interlace_type(pp, interlace_type); + png_uint_32 y; + int pass; + png_byte image[16][SIZE_ROWMAX]; + + /* To help consistent error detection make the parts of this buffer + * that aren't set below all '1': + */ + memset(image, 0xff, sizeof image); + + if (!do_interlace && + npasses != set_write_interlace_handling(pp, interlace_type)) + png_error(pp, "write: png_set_interlace_handling failed"); + + /* Prepare the whole image first to avoid making it 7 times: */ + for (y=0; y 0) + { + /* Set to all 1's for error detection (libpng tends to + * set unset things to 0). + */ + memset(tempRow, 0xff, sizeof tempRow); + interlace_row(tempRow, row, pixel_size, w, pass, + 0/*data always bigendian*/); + row = tempRow; + } + else + continue; + } + +# ifdef PNG_WRITE_FILTER_SUPPORTED + /* Only get to here if the row has some pixels in it, set the + * filters to 'all' for the very first row and thereafter to a + * single filter. It isn't well documented, but png_set_filter + * does accept a filter number (per the spec) as well as a bit + * mask. + * + * The code now uses filters at random, except that on the first + * row of an image it ensures that a previous row filter is in + * the set so that libpng allocates the row buffer. + */ + { + int filters = 8 << random_mod(PNG_FILTER_VALUE_LAST); + + if (pass == 0 && y == 0 && + (filters < PNG_FILTER_UP || w == 1U)) + filters |= PNG_FILTER_UP; + + png_set_filter(pp, 0/*method*/, filters); + } +# endif + + png_write_row(pp, row); + } + } + } + +#ifdef PNG_TEXT_SUPPORTED + { + static char key[] = "end marker"; + static char comment[] = "end"; + png_text text; + + /* Use a compressed text string to test the correct interaction of text + * compression and IDAT compression. + */ + text.compression = TEXT_COMPRESSION; + text.key = key; + text.text = comment; + text.text_length = (sizeof comment)-1; + text.itxt_length = 0; + text.lang = 0; + text.lang_key = 0; + + png_set_text(pp, pi, &text, 1); + } +#endif + + png_write_end(pp, pi); + + /* And store this under the appropriate id, then clean up. */ + store_storefile(ps, id); + + store_write_reset(ps); + } + + Catch(fault) + { + /* Use the png_store returned by the exception. This may help the compiler + * because 'ps' is not used in this branch of the setjmp. Note that fault + * and ps will always be the same value. + */ + store_write_reset(fault); + } +} + +static void +make_size(png_store* const ps, png_byte const colour_type, int bdlo, + int const bdhi) +{ + for (; bdlo <= bdhi; ++bdlo) + { + png_uint_32 width; + + for (width = 1; width <= 16; ++width) + { + png_uint_32 height; + + for (height = 1; height <= 16; ++height) + { + /* The four combinations of DIY interlace and interlace or not - + * no interlace + DIY should be identical to no interlace with + * libpng doing it. + */ + make_size_image(ps, colour_type, DEPTH(bdlo), PNG_INTERLACE_NONE, + width, height, 0); + make_size_image(ps, colour_type, DEPTH(bdlo), PNG_INTERLACE_NONE, + width, height, 1); +# ifdef PNG_WRITE_INTERLACING_SUPPORTED + make_size_image(ps, colour_type, DEPTH(bdlo), PNG_INTERLACE_ADAM7, + width, height, 0); +# endif +# if CAN_WRITE_INTERLACE + /* 1.7.0 removes the hack that prevented app write of an interlaced + * image if WRITE_INTERLACE was not supported + */ + make_size_image(ps, colour_type, DEPTH(bdlo), PNG_INTERLACE_ADAM7, + width, height, 1); +# endif + } + } + } +} + +static void +make_size_images(png_store *ps) +{ + /* This is in case of errors. */ + safecat(ps->test, sizeof ps->test, 0, "make size images"); + + /* Arguments are colour_type, low bit depth, high bit depth + */ + make_size(ps, 0, 0, WRITE_BDHI); + make_size(ps, 2, 3, WRITE_BDHI); + make_size(ps, 3, 0, 3 /*palette: max 8 bits*/); + make_size(ps, 4, 3, WRITE_BDHI); + make_size(ps, 6, 3, WRITE_BDHI); +} + +#ifdef PNG_READ_SUPPORTED +/* Return a row based on image id and 'y' for checking: */ +static void +standard_row(png_const_structp pp, png_byte std[STANDARD_ROWMAX], + png_uint_32 id, png_uint_32 y) +{ + if (WIDTH_FROM_ID(id) == 0) + transform_row(pp, std, COL_FROM_ID(id), DEPTH_FROM_ID(id), y); + else + size_row(std, WIDTH_FROM_ID(id) * bit_size(pp, COL_FROM_ID(id), + DEPTH_FROM_ID(id)), y); +} +#endif /* PNG_READ_SUPPORTED */ + +/* Tests - individual test cases */ +/* Like 'make_standard' but errors are deliberately introduced into the calls + * to ensure that they get detected - it should not be possible to write an + * invalid image with libpng! + */ +/* TODO: the 'set' functions can probably all be made to take a + * png_const_structp rather than a modifiable one. + */ +#ifdef PNG_WARNINGS_SUPPORTED +static void +sBIT0_error_fn(png_structp pp, png_infop pi) +{ + /* 0 is invalid... */ + png_color_8 bad; + bad.red = bad.green = bad.blue = bad.gray = bad.alpha = 0; + png_set_sBIT(pp, pi, &bad); +} + +static void +sBIT_error_fn(png_structp pp, png_infop pi) +{ + png_byte bit_depth; + png_color_8 bad; + + if (png_get_color_type(pp, pi) == PNG_COLOR_TYPE_PALETTE) + bit_depth = 8; + + else + bit_depth = png_get_bit_depth(pp, pi); + + /* Now we know the bit depth we can easily generate an invalid sBIT entry */ + bad.red = bad.green = bad.blue = bad.gray = bad.alpha = + (png_byte)(bit_depth+1); + png_set_sBIT(pp, pi, &bad); +} + +static const struct +{ + void (*fn)(png_structp, png_infop); + const char *msg; + unsigned int warning :1; /* the error is a warning... */ +} error_test[] = + { + /* no warnings makes these errors undetectable prior to 1.7.0 */ + { sBIT0_error_fn, "sBIT(0): failed to detect error", + PNG_LIBPNG_VER < 10700 }, + + { sBIT_error_fn, "sBIT(too big): failed to detect error", + PNG_LIBPNG_VER < 10700 }, + }; + +static void +make_error(png_store* const ps, png_byte const colour_type, + png_byte bit_depth, int interlace_type, int test, png_const_charp name) +{ + context(ps, fault); + + check_interlace_type(interlace_type); + + Try + { + png_infop pi; + const png_structp pp = set_store_for_write(ps, &pi, name); + png_uint_32 w, h; + gnu_volatile(pp) + + if (pp == NULL) + Throw ps; + + w = transform_width(pp, colour_type, bit_depth); + gnu_volatile(w) + h = transform_height(pp, colour_type, bit_depth); + gnu_volatile(h) + png_set_IHDR(pp, pi, w, h, bit_depth, colour_type, interlace_type, + PNG_COMPRESSION_TYPE_BASE, PNG_FILTER_TYPE_BASE); + + if (colour_type == 3) /* palette */ + init_standard_palette(ps, pp, pi, 1U << bit_depth, 0/*do tRNS*/); + + /* Time for a few errors; these are in various optional chunks, the + * standard tests test the standard chunks pretty well. + */ +# define exception__prev exception_prev_1 +# define exception__env exception_env_1 + Try + { + gnu_volatile(exception__prev) + + /* Expect this to throw: */ + ps->expect_error = !error_test[test].warning; + ps->expect_warning = error_test[test].warning; + ps->saw_warning = 0; + error_test[test].fn(pp, pi); + + /* Normally the error is only detected here: */ + png_write_info(pp, pi); + + /* And handle the case where it was only a warning: */ + if (ps->expect_warning && ps->saw_warning) + Throw ps; + + /* If we get here there is a problem, we have success - no error or + * no warning - when we shouldn't have success. Log an error. + */ + store_log(ps, pp, error_test[test].msg, 1 /*error*/); + } + + Catch (fault) + { /* expected exit */ + } +#undef exception__prev +#undef exception__env + + /* And clear these flags */ + ps->expect_warning = 0; + + if (ps->expect_error) + ps->expect_error = 0; + + else + { + /* Now write the whole image, just to make sure that the detected, or + * undetected, errro has not created problems inside libpng. This + * doesn't work if there was a png_error in png_write_info because that + * can abort before PLTE was written. + */ + if (png_get_rowbytes(pp, pi) != + transform_rowsize(pp, colour_type, bit_depth)) + png_error(pp, "row size incorrect"); + + else + { + int npasses = set_write_interlace_handling(pp, interlace_type); + int pass; + + if (npasses != npasses_from_interlace_type(pp, interlace_type)) + png_error(pp, "write: png_set_interlace_handling failed"); + + for (pass=0; pass 0) + interlace_row(buffer, buffer, + bit_size(pp, colour_type, bit_depth), w, pass, + 0/*data always bigendian*/); + else + continue; + } +# endif /* do_own_interlace */ + + png_write_row(pp, buffer); + } + } + } /* image writing */ + + png_write_end(pp, pi); + } + + /* The following deletes the file that was just written. */ + store_write_reset(ps); + } + + Catch(fault) + { + store_write_reset(fault); + } +} + +static int +make_errors(png_modifier* const pm, png_byte const colour_type, + int bdlo, int const bdhi) +{ + for (; bdlo <= bdhi; ++bdlo) + { + int interlace_type; + + for (interlace_type = PNG_INTERLACE_NONE; + interlace_type < INTERLACE_LAST; ++interlace_type) + { + unsigned int test; + char name[FILE_NAME_SIZE]; + + standard_name(name, sizeof name, 0, colour_type, 1<this, colour_type, DEPTH(bdlo), interlace_type, + test, name); + + if (fail(pm)) + return 0; + } + } + } + + return 1; /* keep going */ +} +#endif /* PNG_WARNINGS_SUPPORTED */ + +static void +perform_error_test(png_modifier *pm) +{ +#ifdef PNG_WARNINGS_SUPPORTED /* else there are no cases that work! */ + /* Need to do this here because we just write in this test. */ + safecat(pm->this.test, sizeof pm->this.test, 0, "error test"); + + if (!make_errors(pm, 0, 0, WRITE_BDHI)) + return; + + if (!make_errors(pm, 2, 3, WRITE_BDHI)) + return; + + if (!make_errors(pm, 3, 0, 3)) + return; + + if (!make_errors(pm, 4, 3, WRITE_BDHI)) + return; + + if (!make_errors(pm, 6, 3, WRITE_BDHI)) + return; +#else + UNUSED(pm) +#endif +} + +/* This is just to validate the internal PNG formatting code - if this fails + * then the warning messages the library outputs will probably be garbage. + */ +static void +perform_formatting_test(png_store *ps) +{ +#ifdef PNG_TIME_RFC1123_SUPPORTED + /* The handle into the formatting code is the RFC1123 support; this test does + * nothing if that is compiled out. + */ + context(ps, fault); + + Try + { + png_const_charp correct = "29 Aug 2079 13:53:60 +0000"; + png_const_charp result; +# if PNG_LIBPNG_VER >= 10600 + char timestring[29]; +# endif + png_structp pp; + png_time pt; + + pp = set_store_for_write(ps, NULL, "libpng formatting test"); + + if (pp == NULL) + Throw ps; + + + /* Arbitrary settings: */ + pt.year = 2079; + pt.month = 8; + pt.day = 29; + pt.hour = 13; + pt.minute = 53; + pt.second = 60; /* a leap second */ + +# if PNG_LIBPNG_VER < 10600 + result = png_convert_to_rfc1123(pp, &pt); +# else + if (png_convert_to_rfc1123_buffer(timestring, &pt)) + result = timestring; + + else + result = NULL; +# endif + + if (result == NULL) + png_error(pp, "png_convert_to_rfc1123 failed"); + + if (strcmp(result, correct) != 0) + { + size_t pos = 0; + char msg[128]; + + pos = safecat(msg, sizeof msg, pos, "png_convert_to_rfc1123("); + pos = safecat(msg, sizeof msg, pos, correct); + pos = safecat(msg, sizeof msg, pos, ") returned: '"); + pos = safecat(msg, sizeof msg, pos, result); + pos = safecat(msg, sizeof msg, pos, "'"); + + png_error(pp, msg); + } + + store_write_reset(ps); + } + + Catch(fault) + { + store_write_reset(fault); + } +#else + UNUSED(ps) +#endif +} + +#ifdef PNG_READ_SUPPORTED +/* Because we want to use the same code in both the progressive reader and the + * sequential reader it is necessary to deal with the fact that the progressive + * reader callbacks only have one parameter (png_get_progressive_ptr()), so this + * must contain all the test parameters and all the local variables directly + * accessible to the sequential reader implementation. + * + * The technique adopted is to reinvent part of what Dijkstra termed a + * 'display'; an array of pointers to the stack frames of enclosing functions so + * that a nested function definition can access the local (C auto) variables of + * the functions that contain its definition. In fact C provides the first + * pointer (the local variables - the stack frame pointer) and the last (the + * global variables - the BCPL global vector typically implemented as global + * addresses), this code requires one more pointer to make the display - the + * local variables (and function call parameters) of the function that actually + * invokes either the progressive or sequential reader. + * + * Perhaps confusingly this technique is confounded with classes - the + * 'standard_display' defined here is sub-classed as the 'gamma_display' below. + * A gamma_display is a standard_display, taking advantage of the ANSI-C + * requirement that the pointer to the first member of a structure must be the + * same as the pointer to the structure. This allows us to reuse standard_ + * functions in the gamma test code; something that could not be done with + * nested functions! + */ +typedef struct standard_display +{ + png_store* ps; /* Test parameters (passed to the function) */ + png_byte colour_type; + png_byte bit_depth; + png_byte red_sBIT; /* Input data sBIT values. */ + png_byte green_sBIT; + png_byte blue_sBIT; + png_byte alpha_sBIT; + png_byte interlace_type; + png_byte filler; /* Output has a filler */ + png_uint_32 id; /* Calculated file ID */ + png_uint_32 w; /* Width of image */ + png_uint_32 h; /* Height of image */ + int npasses; /* Number of interlaced passes */ + png_uint_32 pixel_size; /* Width of one pixel in bits */ + png_uint_32 bit_width; /* Width of output row in bits */ + size_t cbRow; /* Bytes in a row of the output image */ + int do_interlace; /* Do interlacing internally */ + int littleendian; /* App (row) data is little endian */ + int is_transparent; /* Transparency information was present. */ + int has_tRNS; /* color type GRAY or RGB with a tRNS chunk. */ + int speed; /* Doing a speed test */ + int use_update_info;/* Call update_info, not start_image */ + struct + { + png_uint_16 red; + png_uint_16 green; + png_uint_16 blue; + } transparent; /* The transparent color, if set. */ + int npalette; /* Number of entries in the palette. */ + store_palette + palette; +} standard_display; + +static void +standard_display_init(standard_display *dp, png_store* ps, png_uint_32 id, + int do_interlace, int use_update_info) +{ + memset(dp, 0, sizeof *dp); + + dp->ps = ps; + dp->colour_type = COL_FROM_ID(id); + dp->bit_depth = DEPTH_FROM_ID(id); + if (dp->bit_depth < 1 || dp->bit_depth > 16) + internal_error(ps, "internal: bad bit depth"); + if (dp->colour_type == 3) + dp->red_sBIT = dp->blue_sBIT = dp->green_sBIT = dp->alpha_sBIT = 8; + else + dp->red_sBIT = dp->blue_sBIT = dp->green_sBIT = dp->alpha_sBIT = + dp->bit_depth; + dp->interlace_type = INTERLACE_FROM_ID(id); + check_interlace_type(dp->interlace_type); + dp->id = id; + /* All the rest are filled in after the read_info: */ + dp->w = 0; + dp->h = 0; + dp->npasses = 0; + dp->pixel_size = 0; + dp->bit_width = 0; + dp->cbRow = 0; + dp->do_interlace = do_interlace; + dp->littleendian = 0; + dp->is_transparent = 0; + dp->speed = ps->speed; + dp->use_update_info = use_update_info; + dp->npalette = 0; + /* Preset the transparent color to black: */ + memset(&dp->transparent, 0, sizeof dp->transparent); + /* Preset the palette to full intensity/opaque througout: */ + memset(dp->palette, 0xff, sizeof dp->palette); +} + +/* Initialize the palette fields - this must be done later because the palette + * comes from the particular png_store_file that is selected. + */ +static void +standard_palette_init(standard_display *dp) +{ + store_palette_entry *palette = store_current_palette(dp->ps, &dp->npalette); + + /* The remaining entries remain white/opaque. */ + if (dp->npalette > 0) + { + int i = dp->npalette; + memcpy(dp->palette, palette, i * sizeof *palette); + + /* Check for a non-opaque palette entry: */ + while (--i >= 0) + if (palette[i].alpha < 255) + break; + +# ifdef __GNUC__ + /* GCC can't handle the more obviously optimizable version. */ + if (i >= 0) + dp->is_transparent = 1; + else + dp->is_transparent = 0; +# else + dp->is_transparent = (i >= 0); +# endif + } +} + +/* Utility to read the palette from the PNG file and convert it into + * store_palette format. This returns 1 if there is any transparency in the + * palette (it does not check for a transparent colour in the non-palette case.) + */ +static int +read_palette(store_palette palette, int *npalette, png_const_structp pp, + png_infop pi) +{ + png_colorp pal; + png_bytep trans_alpha; + int num; + + pal = 0; + *npalette = -1; + + if (png_get_PLTE(pp, pi, &pal, npalette) & PNG_INFO_PLTE) + { + int i = *npalette; + + if (i <= 0 || i > 256) + png_error(pp, "validate: invalid PLTE count"); + + while (--i >= 0) + { + palette[i].red = pal[i].red; + palette[i].green = pal[i].green; + palette[i].blue = pal[i].blue; + } + + /* Mark the remainder of the entries with a flag value (other than + * white/opaque which is the flag value stored above.) + */ + memset(palette + *npalette, 126, (256-*npalette) * sizeof *palette); + } + + else /* !png_get_PLTE */ + { + if (*npalette != (-1)) + png_error(pp, "validate: invalid PLTE result"); + /* But there is no palette, so record this: */ + *npalette = 0; + memset(palette, 113, sizeof (store_palette)); + } + + trans_alpha = 0; + num = 2; /* force error below */ + if ((png_get_tRNS(pp, pi, &trans_alpha, &num, 0) & PNG_INFO_tRNS) != 0 && + (trans_alpha != NULL || num != 1/*returns 1 for a transparent color*/) && + /* Oops, if a palette tRNS gets expanded png_read_update_info (at least so + * far as 1.5.4) does not remove the trans_alpha pointer, only num_trans, + * so in the above call we get a success, we get a pointer (who knows what + * to) and we get num_trans == 0: + */ + !(trans_alpha != NULL && num == 0)) /* TODO: fix this in libpng. */ + { + int i; + + /* Any of these are crash-worthy - given the implementation of + * png_get_tRNS up to 1.5 an app won't crash if it just checks the + * result above and fails to check that the variables it passed have + * actually been filled in! Note that if the app were to pass the + * last, png_color_16p, variable too it couldn't rely on this. + */ + if (trans_alpha == NULL || num <= 0 || num > 256 || num > *npalette) + png_error(pp, "validate: unexpected png_get_tRNS (palette) result"); + + for (i=0; iis_transparent) + png_error(pp, "validate: palette transparency changed"); + + if (npalette != dp->npalette) + { + size_t pos = 0; + char msg[64]; + + pos = safecat(msg, sizeof msg, pos, "validate: palette size changed: "); + pos = safecatn(msg, sizeof msg, pos, dp->npalette); + pos = safecat(msg, sizeof msg, pos, " -> "); + pos = safecatn(msg, sizeof msg, pos, npalette); + png_error(pp, msg); + } + + { + int i = npalette; /* npalette is aliased */ + + while (--i >= 0) + if (palette[i].red != dp->palette[i].red || + palette[i].green != dp->palette[i].green || + palette[i].blue != dp->palette[i].blue || + palette[i].alpha != dp->palette[i].alpha) + png_error(pp, "validate: PLTE or tRNS chunk changed"); + } +} + +/* By passing a 'standard_display' the progressive callbacks can be used + * directly by the sequential code, the functions suffixed "_imp" are the + * implementations, the functions without the suffix are the callbacks. + * + * The code for the info callback is split into two because this callback calls + * png_read_update_info or png_start_read_image and what gets called depends on + * whether the info needs updating (we want to test both calls in pngvalid.) + */ +static void +standard_info_part1(standard_display *dp, png_structp pp, png_infop pi) +{ + if (png_get_bit_depth(pp, pi) != dp->bit_depth) + png_error(pp, "validate: bit depth changed"); + + if (png_get_color_type(pp, pi) != dp->colour_type) + png_error(pp, "validate: color type changed"); + + if (png_get_filter_type(pp, pi) != PNG_FILTER_TYPE_BASE) + png_error(pp, "validate: filter type changed"); + + if (png_get_interlace_type(pp, pi) != dp->interlace_type) + png_error(pp, "validate: interlacing changed"); + + if (png_get_compression_type(pp, pi) != PNG_COMPRESSION_TYPE_BASE) + png_error(pp, "validate: compression type changed"); + + dp->w = png_get_image_width(pp, pi); + + if (dp->w != standard_width(pp, dp->id)) + png_error(pp, "validate: image width changed"); + + dp->h = png_get_image_height(pp, pi); + + if (dp->h != standard_height(pp, dp->id)) + png_error(pp, "validate: image height changed"); + + /* Record (but don't check at present) the input sBIT according to the colour + * type information. + */ + { + png_color_8p sBIT = 0; + + if (png_get_sBIT(pp, pi, &sBIT) & PNG_INFO_sBIT) + { + int sBIT_invalid = 0; + + if (sBIT == 0) + png_error(pp, "validate: unexpected png_get_sBIT result"); + + if (dp->colour_type & PNG_COLOR_MASK_COLOR) + { + if (sBIT->red == 0 || sBIT->red > dp->bit_depth) + sBIT_invalid = 1; + else + dp->red_sBIT = sBIT->red; + + if (sBIT->green == 0 || sBIT->green > dp->bit_depth) + sBIT_invalid = 1; + else + dp->green_sBIT = sBIT->green; + + if (sBIT->blue == 0 || sBIT->blue > dp->bit_depth) + sBIT_invalid = 1; + else + dp->blue_sBIT = sBIT->blue; + } + + else /* !COLOR */ + { + if (sBIT->gray == 0 || sBIT->gray > dp->bit_depth) + sBIT_invalid = 1; + else + dp->blue_sBIT = dp->green_sBIT = dp->red_sBIT = sBIT->gray; + } + + /* All 8 bits in tRNS for a palette image are significant - see the + * spec. + */ + if (dp->colour_type & PNG_COLOR_MASK_ALPHA) + { + if (sBIT->alpha == 0 || sBIT->alpha > dp->bit_depth) + sBIT_invalid = 1; + else + dp->alpha_sBIT = sBIT->alpha; + } + + if (sBIT_invalid) + png_error(pp, "validate: sBIT value out of range"); + } + } + + /* Important: this is validating the value *before* any transforms have been + * put in place. It doesn't matter for the standard tests, where there are + * no transforms, but it does for other tests where rowbytes may change after + * png_read_update_info. + */ + if (png_get_rowbytes(pp, pi) != standard_rowsize(pp, dp->id)) + png_error(pp, "validate: row size changed"); + + /* Validate the colour type 3 palette (this can be present on other color + * types.) + */ + standard_palette_validate(dp, pp, pi); + + /* In any case always check for a tranparent color (notice that the + * colour type 3 case must not give a successful return on the get_tRNS call + * with these arguments!) + */ + { + png_color_16p trans_color = 0; + + if (png_get_tRNS(pp, pi, 0, 0, &trans_color) & PNG_INFO_tRNS) + { + if (trans_color == 0) + png_error(pp, "validate: unexpected png_get_tRNS (color) result"); + + switch (dp->colour_type) + { + case 0: + dp->transparent.red = dp->transparent.green = dp->transparent.blue = + trans_color->gray; + dp->has_tRNS = 1; + break; + + case 2: + dp->transparent.red = trans_color->red; + dp->transparent.green = trans_color->green; + dp->transparent.blue = trans_color->blue; + dp->has_tRNS = 1; + break; + + case 3: + /* Not expected because it should result in the array case + * above. + */ + png_error(pp, "validate: unexpected png_get_tRNS result"); + break; + + default: + png_error(pp, "validate: invalid tRNS chunk with alpha image"); + } + } + } + + /* Read the number of passes - expected to match the value used when + * creating the image (interlaced or not). This has the side effect of + * turning on interlace handling (if do_interlace is not set.) + */ + dp->npasses = npasses_from_interlace_type(pp, dp->interlace_type); + if (!dp->do_interlace) + { +# ifdef PNG_READ_INTERLACING_SUPPORTED + if (dp->npasses != png_set_interlace_handling(pp)) + png_error(pp, "validate: file changed interlace type"); +# else /* !READ_INTERLACING */ + /* This should never happen: the relevant tests (!do_interlace) should + * not be run. + */ + if (dp->npasses > 1) + png_error(pp, "validate: no libpng interlace support"); +# endif /* !READ_INTERLACING */ + } + + /* Caller calls png_read_update_info or png_start_read_image now, then calls + * part2. + */ +} + +/* This must be called *after* the png_read_update_info call to get the correct + * 'rowbytes' value, otherwise png_get_rowbytes will refer to the untransformed + * image. + */ +static void +standard_info_part2(standard_display *dp, png_const_structp pp, + png_const_infop pi, int nImages) +{ + /* Record cbRow now that it can be found. */ + { + png_byte ct = png_get_color_type(pp, pi); + png_byte bd = png_get_bit_depth(pp, pi); + + if (bd >= 8 && (ct == PNG_COLOR_TYPE_RGB || ct == PNG_COLOR_TYPE_GRAY) && + dp->filler) + ct |= 4; /* handle filler as faked alpha channel */ + + dp->pixel_size = bit_size(pp, ct, bd); + } + dp->bit_width = png_get_image_width(pp, pi) * dp->pixel_size; + dp->cbRow = png_get_rowbytes(pp, pi); + + /* Validate the rowbytes here again. */ + if (dp->cbRow != (dp->bit_width+7)/8) + png_error(pp, "bad png_get_rowbytes calculation"); + + /* Then ensure there is enough space for the output image(s). */ + store_ensure_image(dp->ps, pp, nImages, dp->cbRow, dp->h); +} + +static void +standard_info_imp(standard_display *dp, png_structp pp, png_infop pi, + int nImages) +{ + /* Note that the validation routine has the side effect of turning on + * interlace handling in the subsequent code. + */ + standard_info_part1(dp, pp, pi); + + /* And the info callback has to call this (or png_read_update_info - see + * below in the png_modifier code for that variant. + */ + if (dp->use_update_info) + { + /* For debugging the effect of multiple calls: */ + int i = dp->use_update_info; + while (i-- > 0) + png_read_update_info(pp, pi); + } + + else + png_start_read_image(pp); + + /* Validate the height, width and rowbytes plus ensure that sufficient buffer + * exists for decoding the image. + */ + standard_info_part2(dp, pp, pi, nImages); +} + +static void PNGCBAPI +standard_info(png_structp pp, png_infop pi) +{ + standard_display *dp = voidcast(standard_display*, + png_get_progressive_ptr(pp)); + + /* Call with nImages==1 because the progressive reader can only produce one + * image. + */ + standard_info_imp(dp, pp, pi, 1 /*only one image*/); +} + +static void PNGCBAPI +progressive_row(png_structp ppIn, png_bytep new_row, png_uint_32 y, int pass) +{ + png_const_structp pp = ppIn; + const standard_display *dp = voidcast(standard_display*, + png_get_progressive_ptr(pp)); + + /* When handling interlacing some rows will be absent in each pass, the + * callback still gets called, but with a NULL pointer. This is checked + * in the 'else' clause below. We need our own 'cbRow', but we can't call + * png_get_rowbytes because we got no info structure. + */ + if (new_row != NULL) + { + png_bytep row; + + /* In the case where the reader doesn't do the interlace it gives + * us the y in the sub-image: + */ + if (dp->do_interlace && dp->interlace_type == PNG_INTERLACE_ADAM7) + { +#ifdef PNG_USER_TRANSFORM_INFO_SUPPORTED + /* Use this opportunity to validate the png 'current' APIs: */ + if (y != png_get_current_row_number(pp)) + png_error(pp, "png_get_current_row_number is broken"); + + if (pass != png_get_current_pass_number(pp)) + png_error(pp, "png_get_current_pass_number is broken"); +#endif /* USER_TRANSFORM_INFO */ + + y = PNG_ROW_FROM_PASS_ROW(y, pass); + } + + /* Validate this just in case. */ + if (y >= dp->h) + png_error(pp, "invalid y to progressive row callback"); + + row = store_image_row(dp->ps, pp, 0, y); + + /* Combine the new row into the old: */ +#ifdef PNG_READ_INTERLACING_SUPPORTED + if (dp->do_interlace) +#endif /* READ_INTERLACING */ + { + if (dp->interlace_type == PNG_INTERLACE_ADAM7) + deinterlace_row(row, new_row, dp->pixel_size, dp->w, pass, + dp->littleendian); + else + row_copy(row, new_row, dp->pixel_size * dp->w, dp->littleendian); + } +#ifdef PNG_READ_INTERLACING_SUPPORTED + else + png_progressive_combine_row(pp, row, new_row); +#endif /* PNG_READ_INTERLACING_SUPPORTED */ + } + + else if (dp->interlace_type == PNG_INTERLACE_ADAM7 && + PNG_ROW_IN_INTERLACE_PASS(y, pass) && + PNG_PASS_COLS(dp->w, pass) > 0) + png_error(pp, "missing row in progressive de-interlacing"); +} + +static void +sequential_row(standard_display *dp, png_structp pp, png_infop pi, + const int iImage, const int iDisplay) +{ + const int npasses = dp->npasses; + const int do_interlace = dp->do_interlace && + dp->interlace_type == PNG_INTERLACE_ADAM7; + const png_uint_32 height = standard_height(pp, dp->id); + const png_uint_32 width = standard_width(pp, dp->id); + const png_store* ps = dp->ps; + int pass; + + for (pass=0; pass 0 && PNG_ROW_IN_INTERLACE_PASS(y, pass)) + { + /* Read the row into a pair of temporary buffers, then do the + * merge here into the output rows. + */ + png_byte row[STANDARD_ROWMAX], display[STANDARD_ROWMAX]; + + /* The following aids (to some extent) error detection - we can + * see where png_read_row wrote. Use opposite values in row and + * display to make this easier. Don't use 0xff (which is used in + * the image write code to fill unused bits) or 0 (which is a + * likely value to overwrite unused bits with). + */ + memset(row, 0xc5, sizeof row); + memset(display, 0x5c, sizeof display); + + png_read_row(pp, row, display); + + if (iImage >= 0) + deinterlace_row(store_image_row(ps, pp, iImage, y), row, + dp->pixel_size, dp->w, pass, dp->littleendian); + + if (iDisplay >= 0) + deinterlace_row(store_image_row(ps, pp, iDisplay, y), display, + dp->pixel_size, dp->w, pass, dp->littleendian); + } + } + else + png_read_row(pp, + iImage >= 0 ? store_image_row(ps, pp, iImage, y) : NULL, + iDisplay >= 0 ? store_image_row(ps, pp, iDisplay, y) : NULL); + } + } + + /* And finish the read operation (only really necessary if the caller wants + * to find additional data in png_info from chunks after the last IDAT.) + */ + png_read_end(pp, pi); +} + +#ifdef PNG_TEXT_SUPPORTED +static void +standard_check_text(png_const_structp pp, png_const_textp tp, + png_const_charp keyword, png_const_charp text) +{ + char msg[1024]; + size_t pos = safecat(msg, sizeof msg, 0, "text: "); + size_t ok; + + pos = safecat(msg, sizeof msg, pos, keyword); + pos = safecat(msg, sizeof msg, pos, ": "); + ok = pos; + + if (tp->compression != TEXT_COMPRESSION) + { + char buf[64]; + + sprintf(buf, "compression [%d->%d], ", TEXT_COMPRESSION, + tp->compression); + pos = safecat(msg, sizeof msg, pos, buf); + } + + if (tp->key == NULL || strcmp(tp->key, keyword) != 0) + { + pos = safecat(msg, sizeof msg, pos, "keyword \""); + if (tp->key != NULL) + { + pos = safecat(msg, sizeof msg, pos, tp->key); + pos = safecat(msg, sizeof msg, pos, "\", "); + } + + else + pos = safecat(msg, sizeof msg, pos, "null, "); + } + + if (tp->text == NULL) + pos = safecat(msg, sizeof msg, pos, "text lost, "); + + else + { + if (tp->text_length != strlen(text)) + { + char buf[64]; + sprintf(buf, "text length changed[%lu->%lu], ", + (unsigned long)strlen(text), (unsigned long)tp->text_length); + pos = safecat(msg, sizeof msg, pos, buf); + } + + if (strcmp(tp->text, text) != 0) + { + pos = safecat(msg, sizeof msg, pos, "text becomes \""); + pos = safecat(msg, sizeof msg, pos, tp->text); + pos = safecat(msg, sizeof msg, pos, "\" (was \""); + pos = safecat(msg, sizeof msg, pos, text); + pos = safecat(msg, sizeof msg, pos, "\"), "); + } + } + + if (tp->itxt_length != 0) + pos = safecat(msg, sizeof msg, pos, "iTXt length set, "); + + if (tp->lang != NULL) + { + pos = safecat(msg, sizeof msg, pos, "iTXt language \""); + pos = safecat(msg, sizeof msg, pos, tp->lang); + pos = safecat(msg, sizeof msg, pos, "\", "); + } + + if (tp->lang_key != NULL) + { + pos = safecat(msg, sizeof msg, pos, "iTXt keyword \""); + pos = safecat(msg, sizeof msg, pos, tp->lang_key); + pos = safecat(msg, sizeof msg, pos, "\", "); + } + + if (pos > ok) + { + msg[pos-2] = '\0'; /* Remove the ", " at the end */ + png_error(pp, msg); + } +} + +static void +standard_text_validate(standard_display *dp, png_const_structp pp, + png_infop pi, int check_end) +{ + png_textp tp = NULL; + png_uint_32 num_text = png_get_text(pp, pi, &tp, NULL); + + if (num_text == 2 && tp != NULL) + { + standard_check_text(pp, tp, "image name", dp->ps->current->name); + + /* This exists because prior to 1.5.18 the progressive reader left the + * png_struct z_stream unreset at the end of the image, so subsequent + * attempts to use it simply returns Z_STREAM_END. + */ + if (check_end) + standard_check_text(pp, tp+1, "end marker", "end"); + } + + else + { + char msg[64]; + + sprintf(msg, "expected two text items, got %lu", + (unsigned long)num_text); + png_error(pp, msg); + } +} +#else +# define standard_text_validate(dp,pp,pi,check_end) ((void)0) +#endif + +static void +standard_row_validate(standard_display *dp, png_const_structp pp, + int iImage, int iDisplay, png_uint_32 y) +{ + int where; + png_byte std[STANDARD_ROWMAX]; + + /* The row must be pre-initialized to the magic number here for the size + * tests to pass: + */ + memset(std, 178, sizeof std); + standard_row(pp, std, dp->id, y); + + /* At the end both the 'row' and 'display' arrays should end up identical. + * In earlier passes 'row' will be partially filled in, with only the pixels + * that have been read so far, but 'display' will have those pixels + * replicated to fill the unread pixels while reading an interlaced image. + */ + if (iImage >= 0 && + (where = pixel_cmp(std, store_image_row(dp->ps, pp, iImage, y), + dp->bit_width)) != 0) + { + char msg[64]; + sprintf(msg, "PNG image row[%lu][%d] changed from %.2x to %.2x", + (unsigned long)y, where-1, std[where-1], + store_image_row(dp->ps, pp, iImage, y)[where-1]); + png_error(pp, msg); + } + + if (iDisplay >= 0 && + (where = pixel_cmp(std, store_image_row(dp->ps, pp, iDisplay, y), + dp->bit_width)) != 0) + { + char msg[64]; + sprintf(msg, "display row[%lu][%d] changed from %.2x to %.2x", + (unsigned long)y, where-1, std[where-1], + store_image_row(dp->ps, pp, iDisplay, y)[where-1]); + png_error(pp, msg); + } +} + +static void +standard_image_validate(standard_display *dp, png_const_structp pp, int iImage, + int iDisplay) +{ + png_uint_32 y; + + if (iImage >= 0) + store_image_check(dp->ps, pp, iImage); + + if (iDisplay >= 0) + store_image_check(dp->ps, pp, iDisplay); + + for (y=0; yh; ++y) + standard_row_validate(dp, pp, iImage, iDisplay, y); + + /* This avoids false positives if the validation code is never called! */ + dp->ps->validated = 1; +} + +static void PNGCBAPI +standard_end(png_structp ppIn, png_infop pi) +{ + png_const_structp pp = ppIn; + standard_display *dp = voidcast(standard_display*, + png_get_progressive_ptr(pp)); + + UNUSED(pi) + + /* Validate the image - progressive reading only produces one variant for + * interlaced images. + */ + standard_text_validate(dp, pp, pi, + PNG_LIBPNG_VER >= 10518/*check_end: see comments above*/); + standard_image_validate(dp, pp, 0, -1); +} + +/* A single test run checking the standard image to ensure it is not damaged. */ +static void +standard_test(png_store* const psIn, png_uint_32 const id, + int do_interlace, int use_update_info) +{ + standard_display d; + context(psIn, fault); + + /* Set up the display (stack frame) variables from the arguments to the + * function and initialize the locals that are filled in later. + */ + standard_display_init(&d, psIn, id, do_interlace, use_update_info); + + /* Everything is protected by a Try/Catch. The functions called also + * typically have local Try/Catch blocks. + */ + Try + { + png_structp pp; + png_infop pi; + + /* Get a png_struct for reading the image. This will throw an error if it + * fails, so we don't need to check the result. + */ + pp = set_store_for_read(d.ps, &pi, d.id, + d.do_interlace ? (d.ps->progressive ? + "pngvalid progressive deinterlacer" : + "pngvalid sequential deinterlacer") : (d.ps->progressive ? + "progressive reader" : "sequential reader")); + + /* Initialize the palette correctly from the png_store_file. */ + standard_palette_init(&d); + + /* Introduce the correct read function. */ + if (d.ps->progressive) + { + png_set_progressive_read_fn(pp, &d, standard_info, progressive_row, + standard_end); + + /* Now feed data into the reader until we reach the end: */ + store_progressive_read(d.ps, pp, pi); + } + else + { + /* Note that this takes the store, not the display. */ + png_set_read_fn(pp, d.ps, store_read); + + /* Check the header values: */ + png_read_info(pp, pi); + + /* The code tests both versions of the images that the sequential + * reader can produce. + */ + standard_info_imp(&d, pp, pi, 2 /*images*/); + + /* Need the total bytes in the image below; we can't get to this point + * unless the PNG file values have been checked against the expected + * values. + */ + { + sequential_row(&d, pp, pi, 0, 1); + + /* After the last pass loop over the rows again to check that the + * image is correct. + */ + if (!d.speed) + { + standard_text_validate(&d, pp, pi, 1/*check_end*/); + standard_image_validate(&d, pp, 0, 1); + } + else + d.ps->validated = 1; + } + } + + /* Check for validation. */ + if (!d.ps->validated) + png_error(pp, "image read failed silently"); + + /* Successful completion. */ + } + + Catch(fault) + d.ps = fault; /* make sure this hasn't been clobbered. */ + + /* In either case clean up the store. */ + store_read_reset(d.ps); +} + +static int +test_standard(png_modifier* const pm, png_byte const colour_type, + int bdlo, int const bdhi) +{ + for (; bdlo <= bdhi; ++bdlo) + { + int interlace_type; + + for (interlace_type = PNG_INTERLACE_NONE; + interlace_type < INTERLACE_LAST; ++interlace_type) + { + standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), 0/*palette*/, + interlace_type, 0, 0, 0), do_read_interlace, pm->use_update_info); + + if (fail(pm)) + return 0; + } + } + + return 1; /* keep going */ +} + +static void +perform_standard_test(png_modifier *pm) +{ + /* Test each colour type over the valid range of bit depths (expressed as + * log2(bit_depth) in turn, stop as soon as any error is detected. + */ + if (!test_standard(pm, 0, 0, READ_BDHI)) + return; + + if (!test_standard(pm, 2, 3, READ_BDHI)) + return; + + if (!test_standard(pm, 3, 0, 3)) + return; + + if (!test_standard(pm, 4, 3, READ_BDHI)) + return; + + if (!test_standard(pm, 6, 3, READ_BDHI)) + return; +} + + +/********************************** SIZE TESTS ********************************/ +static int +test_size(png_modifier* const pm, png_byte const colour_type, + int bdlo, int const bdhi) +{ + /* Run the tests on each combination. + * + * NOTE: on my 32 bit x86 each of the following blocks takes + * a total of 3.5 seconds if done across every combo of bit depth + * width and height. This is a waste of time in practice, hence the + * hinc and winc stuff: + */ + static const png_byte hinc[] = {1, 3, 11, 1, 5}; + static const png_byte winc[] = {1, 9, 5, 7, 1}; + const int save_bdlo = bdlo; + + for (; bdlo <= bdhi; ++bdlo) + { + png_uint_32 h, w; + + for (h=1; h<=16; h+=hinc[bdlo]) for (w=1; w<=16; w+=winc[bdlo]) + { + /* First test all the 'size' images against the sequential + * reader using libpng to deinterlace (where required.) This + * validates the write side of libpng. There are four possibilities + * to validate. + */ + standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), 0/*palette*/, + PNG_INTERLACE_NONE, w, h, 0), 0/*do_interlace*/, + pm->use_update_info); + + if (fail(pm)) + return 0; + + standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), 0/*palette*/, + PNG_INTERLACE_NONE, w, h, 1), 0/*do_interlace*/, + pm->use_update_info); + + if (fail(pm)) + return 0; + + /* Now validate the interlaced read side - do_interlace true, + * in the progressive case this does actually make a difference + * to the code used in the non-interlaced case too. + */ + standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), 0/*palette*/, + PNG_INTERLACE_NONE, w, h, 0), 1/*do_interlace*/, + pm->use_update_info); + + if (fail(pm)) + return 0; + +# if CAN_WRITE_INTERLACE + /* Validate the pngvalid code itself: */ + standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), 0/*palette*/, + PNG_INTERLACE_ADAM7, w, h, 1), 1/*do_interlace*/, + pm->use_update_info); + + if (fail(pm)) + return 0; +# endif + } + } + + /* Now do the tests of libpng interlace handling, after we have made sure + * that the pngvalid version works: + */ + for (bdlo = save_bdlo; bdlo <= bdhi; ++bdlo) + { + png_uint_32 h, w; + + for (h=1; h<=16; h+=hinc[bdlo]) for (w=1; w<=16; w+=winc[bdlo]) + { +# ifdef PNG_READ_INTERLACING_SUPPORTED + /* Test with pngvalid generated interlaced images first; we have + * already verify these are ok (unless pngvalid has self-consistent + * read/write errors, which is unlikely), so this detects errors in the + * read side first: + */ +# if CAN_WRITE_INTERLACE + standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), 0/*palette*/, + PNG_INTERLACE_ADAM7, w, h, 1), 0/*do_interlace*/, + pm->use_update_info); + + if (fail(pm)) + return 0; +# endif +# endif /* READ_INTERLACING */ + +# ifdef PNG_WRITE_INTERLACING_SUPPORTED + /* Test the libpng write side against the pngvalid read side: */ + standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), 0/*palette*/, + PNG_INTERLACE_ADAM7, w, h, 0), 1/*do_interlace*/, + pm->use_update_info); + + if (fail(pm)) + return 0; +# endif + +# ifdef PNG_READ_INTERLACING_SUPPORTED +# ifdef PNG_WRITE_INTERLACING_SUPPORTED + /* Test both together: */ + standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), 0/*palette*/, + PNG_INTERLACE_ADAM7, w, h, 0), 0/*do_interlace*/, + pm->use_update_info); + + if (fail(pm)) + return 0; +# endif +# endif /* READ_INTERLACING */ + } + } + + return 1; /* keep going */ +} + +static void +perform_size_test(png_modifier *pm) +{ + /* Test each colour type over the valid range of bit depths (expressed as + * log2(bit_depth) in turn, stop as soon as any error is detected. + */ + if (!test_size(pm, 0, 0, READ_BDHI)) + return; + + if (!test_size(pm, 2, 3, READ_BDHI)) + return; + + /* For the moment don't do the palette test - it's a waste of time when + * compared to the grayscale test. + */ +#if 0 + if (!test_size(pm, 3, 0, 3)) + return; +#endif + + if (!test_size(pm, 4, 3, READ_BDHI)) + return; + + if (!test_size(pm, 6, 3, READ_BDHI)) + return; +} + + +/******************************* TRANSFORM TESTS ******************************/ +#ifdef PNG_READ_TRANSFORMS_SUPPORTED +/* A set of tests to validate libpng image transforms. The possibilities here + * are legion because the transforms can be combined in a combinatorial + * fashion. To deal with this some measure of restraint is required, otherwise + * the tests would take forever. + */ +typedef struct image_pixel +{ + /* A local (pngvalid) representation of a PNG pixel, in all its + * various forms. + */ + unsigned int red, green, blue, alpha; /* For non-palette images. */ + unsigned int palette_index; /* For a palette image. */ + png_byte colour_type; /* As in the spec. */ + png_byte bit_depth; /* Defines bit size in row */ + png_byte sample_depth; /* Scale of samples */ + unsigned int have_tRNS :1; /* tRNS chunk may need processing */ + unsigned int swap_rgb :1; /* RGB swapped to BGR */ + unsigned int alpha_first :1; /* Alpha at start, not end */ + unsigned int alpha_inverted :1; /* Alpha channel inverted */ + unsigned int mono_inverted :1; /* Gray channel inverted */ + unsigned int swap16 :1; /* Byte swap 16-bit components */ + unsigned int littleendian :1; /* High bits on right */ + unsigned int sig_bits :1; /* Pixel shifted (sig bits only) */ + + /* For checking the code calculates double precision floating point values + * along with an error value, accumulated from the transforms. Because an + * sBIT setting allows larger error bounds (indeed, by the spec, apparently + * up to just less than +/-1 in the scaled value) the *lowest* sBIT for each + * channel is stored. This sBIT value is folded in to the stored error value + * at the end of the application of the transforms to the pixel. + * + * If sig_bits is set above the red, green, blue and alpha values have been + * scaled so they only contain the significant bits of the component values. + */ + double redf, greenf, bluef, alphaf; + double rede, greene, bluee, alphae; + png_byte red_sBIT, green_sBIT, blue_sBIT, alpha_sBIT; +} image_pixel; + +/* Shared utility function, see below. */ +static void +image_pixel_setf(image_pixel *this, unsigned int rMax, unsigned int gMax, + unsigned int bMax, unsigned int aMax) +{ + this->redf = this->red / (double)rMax; + this->greenf = this->green / (double)gMax; + this->bluef = this->blue / (double)bMax; + this->alphaf = this->alpha / (double)aMax; + + if (this->red < rMax) + this->rede = this->redf * DBL_EPSILON; + else + this->rede = 0; + if (this->green < gMax) + this->greene = this->greenf * DBL_EPSILON; + else + this->greene = 0; + if (this->blue < bMax) + this->bluee = this->bluef * DBL_EPSILON; + else + this->bluee = 0; + if (this->alpha < aMax) + this->alphae = this->alphaf * DBL_EPSILON; + else + this->alphae = 0; +} + +/* Initialize the structure for the next pixel - call this before doing any + * transforms and call it for each pixel since all the fields may need to be + * reset. + */ +static void +image_pixel_init(image_pixel *this, png_const_bytep row, png_byte colour_type, + png_byte bit_depth, png_uint_32 x, store_palette palette, + const image_pixel *format /*from pngvalid transform of input*/) +{ + const png_byte sample_depth = (png_byte)(colour_type == + PNG_COLOR_TYPE_PALETTE ? 8 : bit_depth); + const unsigned int max = (1U<swap16); + const int littleendian = (format != 0 && format->littleendian); + const int sig_bits = (format != 0 && format->sig_bits); + + /* Initially just set everything to the same number and the alpha to opaque. + * Note that this currently assumes a simple palette where entry x has colour + * rgb(x,x,x)! + */ + this->palette_index = this->red = this->green = this->blue = + sample(row, colour_type, bit_depth, x, 0, swap16, littleendian); + this->alpha = max; + this->red_sBIT = this->green_sBIT = this->blue_sBIT = this->alpha_sBIT = + sample_depth; + + /* Then override as appropriate: */ + if (colour_type == 3) /* palette */ + { + /* This permits the caller to default to the sample value. */ + if (palette != 0) + { + const unsigned int i = this->palette_index; + + this->red = palette[i].red; + this->green = palette[i].green; + this->blue = palette[i].blue; + this->alpha = palette[i].alpha; + } + } + + else /* not palette */ + { + unsigned int i = 0; + + if ((colour_type & 4) != 0 && format != 0 && format->alpha_first) + { + this->alpha = this->red; + /* This handles the gray case for 'AG' pixels */ + this->palette_index = this->red = this->green = this->blue = + sample(row, colour_type, bit_depth, x, 1, swap16, littleendian); + i = 1; + } + + if (colour_type & 2) + { + /* Green is second for both BGR and RGB: */ + this->green = sample(row, colour_type, bit_depth, x, ++i, swap16, + littleendian); + + if (format != 0 && format->swap_rgb) /* BGR */ + this->red = sample(row, colour_type, bit_depth, x, ++i, swap16, + littleendian); + else + this->blue = sample(row, colour_type, bit_depth, x, ++i, swap16, + littleendian); + } + + else /* grayscale */ if (format != 0 && format->mono_inverted) + this->red = this->green = this->blue = this->red ^ max; + + if ((colour_type & 4) != 0) /* alpha */ + { + if (format == 0 || !format->alpha_first) + this->alpha = sample(row, colour_type, bit_depth, x, ++i, swap16, + littleendian); + + if (format != 0 && format->alpha_inverted) + this->alpha ^= max; + } + } + + /* Calculate the scaled values, these are simply the values divided by + * 'max' and the error is initialized to the double precision epsilon value + * from the header file. + */ + image_pixel_setf(this, + sig_bits ? (1U << format->red_sBIT)-1 : max, + sig_bits ? (1U << format->green_sBIT)-1 : max, + sig_bits ? (1U << format->blue_sBIT)-1 : max, + sig_bits ? (1U << format->alpha_sBIT)-1 : max); + + /* Store the input information for use in the transforms - these will + * modify the information. + */ + this->colour_type = colour_type; + this->bit_depth = bit_depth; + this->sample_depth = sample_depth; + this->have_tRNS = 0; + this->swap_rgb = 0; + this->alpha_first = 0; + this->alpha_inverted = 0; + this->mono_inverted = 0; + this->swap16 = 0; + this->littleendian = 0; + this->sig_bits = 0; +} + +#if defined PNG_READ_EXPAND_SUPPORTED || defined PNG_READ_GRAY_TO_RGB_SUPPORTED\ + || defined PNG_READ_EXPAND_SUPPORTED || defined PNG_READ_EXPAND_16_SUPPORTED\ + || defined PNG_READ_BACKGROUND_SUPPORTED +/* Convert a palette image to an rgb image. This necessarily converts the tRNS + * chunk at the same time, because the tRNS will be in palette form. The way + * palette validation works means that the original palette is never updated, + * instead the image_pixel value from the row contains the RGB of the + * corresponding palette entry and *this* is updated. Consequently this routine + * only needs to change the colour type information. + */ +static void +image_pixel_convert_PLTE(image_pixel *this) +{ + if (this->colour_type == PNG_COLOR_TYPE_PALETTE) + { + if (this->have_tRNS) + { + this->colour_type = PNG_COLOR_TYPE_RGB_ALPHA; + this->have_tRNS = 0; + } + else + this->colour_type = PNG_COLOR_TYPE_RGB; + + /* The bit depth of the row changes at this point too (notice that this is + * the row format, not the sample depth, which is separate.) + */ + this->bit_depth = 8; + } +} + +/* Add an alpha channel; this will import the tRNS information because tRNS is + * not valid in an alpha image. The bit depth will invariably be set to at + * least 8 prior to 1.7.0. Palette images will be converted to alpha (using + * the above API). With png_set_background the alpha channel is never expanded + * but this routine is used by pngvalid to simplify code; 'for_background' + * records this. + */ +static void +image_pixel_add_alpha(image_pixel *this, const standard_display *display, + int for_background) +{ + if (this->colour_type == PNG_COLOR_TYPE_PALETTE) + image_pixel_convert_PLTE(this); + + if ((this->colour_type & PNG_COLOR_MASK_ALPHA) == 0) + { + if (this->colour_type == PNG_COLOR_TYPE_GRAY) + { +# if PNG_LIBPNG_VER < 10700 + if (!for_background && this->bit_depth < 8) + this->bit_depth = this->sample_depth = 8; +# endif + + if (this->have_tRNS) + { + /* After 1.7 the expansion of bit depth only happens if there is a + * tRNS chunk to expand at this point. + */ +# if PNG_LIBPNG_VER >= 10700 + if (!for_background && this->bit_depth < 8) + this->bit_depth = this->sample_depth = 8; +# endif + + this->have_tRNS = 0; + + /* Check the input, original, channel value here against the + * original tRNS gray chunk valie. + */ + if (this->red == display->transparent.red) + this->alphaf = 0; + else + this->alphaf = 1; + } + else + this->alphaf = 1; + + this->colour_type = PNG_COLOR_TYPE_GRAY_ALPHA; + } + + else if (this->colour_type == PNG_COLOR_TYPE_RGB) + { + if (this->have_tRNS) + { + this->have_tRNS = 0; + + /* Again, check the exact input values, not the current transformed + * value! + */ + if (this->red == display->transparent.red && + this->green == display->transparent.green && + this->blue == display->transparent.blue) + this->alphaf = 0; + else + this->alphaf = 1; + } + else + this->alphaf = 1; + + this->colour_type = PNG_COLOR_TYPE_RGB_ALPHA; + } + + /* The error in the alpha is zero and the sBIT value comes from the + * original sBIT data (actually it will always be the original bit depth). + */ + this->alphae = 0; + this->alpha_sBIT = display->alpha_sBIT; + } +} +#endif /* transforms that need image_pixel_add_alpha */ + +struct transform_display; +typedef struct image_transform +{ + /* The name of this transform: a string. */ + const char *name; + + /* Each transform can be disabled from the command line: */ + int enable; + + /* The global list of transforms; read only. */ + struct image_transform *const list; + + /* The global count of the number of times this transform has been set on an + * image. + */ + unsigned int global_use; + + /* The local count of the number of times this transform has been set. */ + unsigned int local_use; + + /* The next transform in the list, each transform must call its own next + * transform after it has processed the pixel successfully. + */ + const struct image_transform *next; + + /* A single transform for the image, expressed as a series of function + * callbacks and some space for values. + * + * First a callback to add any required modifications to the png_modifier; + * this gets called just before the modifier is set up for read. + */ + void (*ini)(const struct image_transform *this, + struct transform_display *that); + + /* And a callback to set the transform on the current png_read_struct: + */ + void (*set)(const struct image_transform *this, + struct transform_display *that, png_structp pp, png_infop pi); + + /* Then a transform that takes an input pixel in one PNG format or another + * and modifies it by a pngvalid implementation of the transform (thus + * duplicating the libpng intent without, we hope, duplicating the bugs + * in the libpng implementation!) The png_structp is solely to allow error + * reporting via png_error and png_warning. + */ + void (*mod)(const struct image_transform *this, image_pixel *that, + png_const_structp pp, const struct transform_display *display); + + /* Add this transform to the list and return true if the transform is + * meaningful for this colour type and bit depth - if false then the + * transform should have no effect on the image so there's not a lot of + * point running it. + */ + int (*add)(struct image_transform *this, + const struct image_transform **that, png_byte colour_type, + png_byte bit_depth); +} image_transform; + +typedef struct transform_display +{ + standard_display this; + + /* Parameters */ + png_modifier* pm; + const image_transform* transform_list; + unsigned int max_gamma_8; + + /* Local variables */ + png_byte output_colour_type; + png_byte output_bit_depth; + png_byte unpacked; + + /* Modifications (not necessarily used.) */ + gama_modification gama_mod; + chrm_modification chrm_mod; + srgb_modification srgb_mod; +} transform_display; + +/* Set sRGB, cHRM and gAMA transforms as required by the current encoding. */ +static void +transform_set_encoding(transform_display *this) +{ + /* Set up the png_modifier '_current' fields then use these to determine how + * to add appropriate chunks. + */ + png_modifier *pm = this->pm; + + modifier_set_encoding(pm); + + if (modifier_color_encoding_is_set(pm)) + { + if (modifier_color_encoding_is_sRGB(pm)) + srgb_modification_init(&this->srgb_mod, pm, PNG_sRGB_INTENT_ABSOLUTE); + + else + { + /* Set gAMA and cHRM separately. */ + gama_modification_init(&this->gama_mod, pm, pm->current_gamma); + + if (pm->current_encoding != 0) + chrm_modification_init(&this->chrm_mod, pm, pm->current_encoding); + } + } +} + +/* Three functions to end the list: */ +static void +image_transform_ini_end(const image_transform *this, + transform_display *that) +{ + UNUSED(this) + UNUSED(that) +} + +static void +image_transform_set_end(const image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + UNUSED(this) + UNUSED(that) + UNUSED(pp) + UNUSED(pi) +} + +/* At the end of the list recalculate the output image pixel value from the + * double precision values set up by the preceding 'mod' calls: + */ +static unsigned int +sample_scale(double sample_value, unsigned int scale) +{ + sample_value = floor(sample_value * scale + .5); + + /* Return NaN as 0: */ + if (!(sample_value > 0)) + sample_value = 0; + else if (sample_value > scale) + sample_value = scale; + + return (unsigned int)sample_value; +} + +static void +image_transform_mod_end(const image_transform *this, image_pixel *that, + png_const_structp pp, const transform_display *display) +{ + const unsigned int scale = (1U<sample_depth)-1; + const int sig_bits = that->sig_bits; + + UNUSED(this) + UNUSED(pp) + UNUSED(display) + + /* At the end recalculate the digitized red green and blue values according + * to the current sample_depth of the pixel. + * + * The sample value is simply scaled to the maximum, checking for over + * and underflow (which can both happen for some image transforms, + * including simple size scaling, though libpng doesn't do that at present. + */ + that->red = sample_scale(that->redf, scale); + + /* This is a bit bogus; really the above calculation should use the red_sBIT + * value, not sample_depth, but because libpng does png_set_shift by just + * shifting the bits we get errors if we don't do it the same way. + */ + if (sig_bits && that->red_sBIT < that->sample_depth) + that->red >>= that->sample_depth - that->red_sBIT; + + /* The error value is increased, at the end, according to the lowest sBIT + * value seen. Common sense tells us that the intermediate integer + * representations are no more accurate than +/- 0.5 in the integral values, + * the sBIT allows the implementation to be worse than this. In addition the + * PNG specification actually permits any error within the range (-1..+1), + * but that is ignored here. Instead the final digitized value is compared, + * below to the digitized value of the error limits - this has the net effect + * of allowing (almost) +/-1 in the output value. It's difficult to see how + * any algorithm that digitizes intermediate results can be more accurate. + */ + that->rede += 1./(2*((1U<red_sBIT)-1)); + + if (that->colour_type & PNG_COLOR_MASK_COLOR) + { + that->green = sample_scale(that->greenf, scale); + if (sig_bits && that->green_sBIT < that->sample_depth) + that->green >>= that->sample_depth - that->green_sBIT; + + that->blue = sample_scale(that->bluef, scale); + if (sig_bits && that->blue_sBIT < that->sample_depth) + that->blue >>= that->sample_depth - that->blue_sBIT; + + that->greene += 1./(2*((1U<green_sBIT)-1)); + that->bluee += 1./(2*((1U<blue_sBIT)-1)); + } + else + { + that->blue = that->green = that->red; + that->bluef = that->greenf = that->redf; + that->bluee = that->greene = that->rede; + } + + if ((that->colour_type & PNG_COLOR_MASK_ALPHA) || + that->colour_type == PNG_COLOR_TYPE_PALETTE) + { + that->alpha = sample_scale(that->alphaf, scale); + that->alphae += 1./(2*((1U<alpha_sBIT)-1)); + } + else + { + that->alpha = scale; /* opaque */ + that->alphaf = 1; /* Override this. */ + that->alphae = 0; /* It's exact ;-) */ + } + + if (sig_bits && that->alpha_sBIT < that->sample_depth) + that->alpha >>= that->sample_depth - that->alpha_sBIT; +} + +/* Static 'end' structure: */ +static image_transform image_transform_end = +{ + "(end)", /* name */ + 1, /* enable */ + 0, /* list */ + 0, /* global_use */ + 0, /* local_use */ + 0, /* next */ + image_transform_ini_end, + image_transform_set_end, + image_transform_mod_end, + 0 /* never called, I want it to crash if it is! */ +}; + +/* Reader callbacks and implementations, where they differ from the standard + * ones. + */ +static void +transform_display_init(transform_display *dp, png_modifier *pm, png_uint_32 id, + const image_transform *transform_list) +{ + memset(dp, 0, sizeof *dp); + + /* Standard fields */ + standard_display_init(&dp->this, &pm->this, id, do_read_interlace, + pm->use_update_info); + + /* Parameter fields */ + dp->pm = pm; + dp->transform_list = transform_list; + dp->max_gamma_8 = 16; + + /* Local variable fields */ + dp->output_colour_type = 255; /* invalid */ + dp->output_bit_depth = 255; /* invalid */ + dp->unpacked = 0; /* not unpacked */ +} + +static void +transform_info_imp(transform_display *dp, png_structp pp, png_infop pi) +{ + /* Reuse the standard stuff as appropriate. */ + standard_info_part1(&dp->this, pp, pi); + + /* Now set the list of transforms. */ + dp->transform_list->set(dp->transform_list, dp, pp, pi); + + /* Update the info structure for these transforms: */ + { + int i = dp->this.use_update_info; + /* Always do one call, even if use_update_info is 0. */ + do + png_read_update_info(pp, pi); + while (--i > 0); + } + + /* And get the output information into the standard_display */ + standard_info_part2(&dp->this, pp, pi, 1/*images*/); + + /* Plus the extra stuff we need for the transform tests: */ + dp->output_colour_type = png_get_color_type(pp, pi); + dp->output_bit_depth = png_get_bit_depth(pp, pi); + + /* If png_set_filler is in action then fake the output color type to include + * an alpha channel where appropriate. + */ + if (dp->output_bit_depth >= 8 && + (dp->output_colour_type == PNG_COLOR_TYPE_RGB || + dp->output_colour_type == PNG_COLOR_TYPE_GRAY) && dp->this.filler) + dp->output_colour_type |= 4; + + /* Validate the combination of colour type and bit depth that we are getting + * out of libpng; the semantics of something not in the PNG spec are, at + * best, unclear. + */ + switch (dp->output_colour_type) + { + case PNG_COLOR_TYPE_PALETTE: + if (dp->output_bit_depth > 8) goto error; + /*FALL THROUGH*/ + case PNG_COLOR_TYPE_GRAY: + if (dp->output_bit_depth == 1 || dp->output_bit_depth == 2 || + dp->output_bit_depth == 4) + break; + /*FALL THROUGH*/ + default: + if (dp->output_bit_depth == 8 || dp->output_bit_depth == 16) + break; + /*FALL THROUGH*/ + error: + { + char message[128]; + size_t pos; + + pos = safecat(message, sizeof message, 0, + "invalid final bit depth: colour type("); + pos = safecatn(message, sizeof message, pos, dp->output_colour_type); + pos = safecat(message, sizeof message, pos, ") with bit depth: "); + pos = safecatn(message, sizeof message, pos, dp->output_bit_depth); + + png_error(pp, message); + } + } + + /* Use a test pixel to check that the output agrees with what we expect - + * this avoids running the whole test if the output is unexpected. This also + * checks for internal errors. + */ + { + image_pixel test_pixel; + + memset(&test_pixel, 0, sizeof test_pixel); + test_pixel.colour_type = dp->this.colour_type; /* input */ + test_pixel.bit_depth = dp->this.bit_depth; + if (test_pixel.colour_type == PNG_COLOR_TYPE_PALETTE) + test_pixel.sample_depth = 8; + else + test_pixel.sample_depth = test_pixel.bit_depth; + /* Don't need sBIT here, but it must be set to non-zero to avoid + * arithmetic overflows. + */ + test_pixel.have_tRNS = dp->this.is_transparent != 0; + test_pixel.red_sBIT = test_pixel.green_sBIT = test_pixel.blue_sBIT = + test_pixel.alpha_sBIT = test_pixel.sample_depth; + + dp->transform_list->mod(dp->transform_list, &test_pixel, pp, dp); + + if (test_pixel.colour_type != dp->output_colour_type) + { + char message[128]; + size_t pos = safecat(message, sizeof message, 0, "colour type "); + + pos = safecatn(message, sizeof message, pos, dp->output_colour_type); + pos = safecat(message, sizeof message, pos, " expected "); + pos = safecatn(message, sizeof message, pos, test_pixel.colour_type); + + png_error(pp, message); + } + + if (test_pixel.bit_depth != dp->output_bit_depth) + { + char message[128]; + size_t pos = safecat(message, sizeof message, 0, "bit depth "); + + pos = safecatn(message, sizeof message, pos, dp->output_bit_depth); + pos = safecat(message, sizeof message, pos, " expected "); + pos = safecatn(message, sizeof message, pos, test_pixel.bit_depth); + + png_error(pp, message); + } + + /* If both bit depth and colour type are correct check the sample depth. + */ + if (test_pixel.colour_type == PNG_COLOR_TYPE_PALETTE && + test_pixel.sample_depth != 8) /* oops - internal error! */ + png_error(pp, "pngvalid: internal: palette sample depth not 8"); + else if (dp->unpacked && test_pixel.bit_depth != 8) + png_error(pp, "pngvalid: internal: bad unpacked pixel depth"); + else if (!dp->unpacked && test_pixel.colour_type != PNG_COLOR_TYPE_PALETTE + && test_pixel.bit_depth != test_pixel.sample_depth) + { + char message[128]; + size_t pos = safecat(message, sizeof message, 0, + "internal: sample depth "); + + /* Because unless something has set 'unpacked' or the image is palette + * mapped we expect the transform to keep sample depth and bit depth + * the same. + */ + pos = safecatn(message, sizeof message, pos, test_pixel.sample_depth); + pos = safecat(message, sizeof message, pos, " expected "); + pos = safecatn(message, sizeof message, pos, test_pixel.bit_depth); + + png_error(pp, message); + } + else if (test_pixel.bit_depth != dp->output_bit_depth) + { + /* This could be a libpng error too; libpng has not produced what we + * expect for the output bit depth. + */ + char message[128]; + size_t pos = safecat(message, sizeof message, 0, + "internal: bit depth "); + + pos = safecatn(message, sizeof message, pos, dp->output_bit_depth); + pos = safecat(message, sizeof message, pos, " expected "); + pos = safecatn(message, sizeof message, pos, test_pixel.bit_depth); + + png_error(pp, message); + } + } +} + +static void PNGCBAPI +transform_info(png_structp pp, png_infop pi) +{ + transform_info_imp(voidcast(transform_display*, png_get_progressive_ptr(pp)), + pp, pi); +} + +static void +transform_range_check(png_const_structp pp, unsigned int r, unsigned int g, + unsigned int b, unsigned int a, unsigned int in_digitized, double in, + unsigned int out, png_byte sample_depth, double err, double limit, + const char *name, double digitization_error) +{ + /* Compare the scaled, digitzed, values of our local calculation (in+-err) + * with the digitized values libpng produced; 'sample_depth' is the actual + * digitization depth of the libpng output colors (the bit depth except for + * palette images where it is always 8.) The check on 'err' is to detect + * internal errors in pngvalid itself. + */ + unsigned int max = (1U< limit ||) !(out >= in_min && out <= in_max)) + { + char message[256]; + size_t pos; + + pos = safecat(message, sizeof message, 0, name); + pos = safecat(message, sizeof message, pos, " output value error: rgba("); + pos = safecatn(message, sizeof message, pos, r); + pos = safecat(message, sizeof message, pos, ","); + pos = safecatn(message, sizeof message, pos, g); + pos = safecat(message, sizeof message, pos, ","); + pos = safecatn(message, sizeof message, pos, b); + pos = safecat(message, sizeof message, pos, ","); + pos = safecatn(message, sizeof message, pos, a); + pos = safecat(message, sizeof message, pos, "): "); + pos = safecatn(message, sizeof message, pos, out); + pos = safecat(message, sizeof message, pos, " expected: "); + pos = safecatn(message, sizeof message, pos, in_digitized); + pos = safecat(message, sizeof message, pos, " ("); + pos = safecatd(message, sizeof message, pos, (in-err)*max, 3); + pos = safecat(message, sizeof message, pos, ".."); + pos = safecatd(message, sizeof message, pos, (in+err)*max, 3); + pos = safecat(message, sizeof message, pos, ")"); + + png_error(pp, message); + } + + UNUSED(limit) +} + +static void +transform_image_validate(transform_display *dp, png_const_structp pp, + png_infop pi) +{ + /* Constants for the loop below: */ + const png_store* const ps = dp->this.ps; + const png_byte in_ct = dp->this.colour_type; + const png_byte in_bd = dp->this.bit_depth; + const png_uint_32 w = dp->this.w; + const png_uint_32 h = dp->this.h; + const png_byte out_ct = dp->output_colour_type; + const png_byte out_bd = dp->output_bit_depth; + const png_byte sample_depth = (png_byte)(out_ct == + PNG_COLOR_TYPE_PALETTE ? 8 : out_bd); + const png_byte red_sBIT = dp->this.red_sBIT; + const png_byte green_sBIT = dp->this.green_sBIT; + const png_byte blue_sBIT = dp->this.blue_sBIT; + const png_byte alpha_sBIT = dp->this.alpha_sBIT; + const int have_tRNS = dp->this.is_transparent; + double digitization_error; + + store_palette out_palette; + png_uint_32 y; + + UNUSED(pi) + + /* Check for row overwrite errors */ + store_image_check(dp->this.ps, pp, 0); + + /* Read the palette corresponding to the output if the output colour type + * indicates a palette, othewise set out_palette to garbage. + */ + if (out_ct == PNG_COLOR_TYPE_PALETTE) + { + /* Validate that the palette count itself has not changed - this is not + * expected. + */ + int npalette = (-1); + + (void)read_palette(out_palette, &npalette, pp, pi); + if (npalette != dp->this.npalette) + png_error(pp, "unexpected change in palette size"); + + digitization_error = .5; + } + else + { + png_byte in_sample_depth; + + memset(out_palette, 0x5e, sizeof out_palette); + + /* use-input-precision means assume that if the input has 8 bit (or less) + * samples and the output has 16 bit samples the calculations will be done + * with 8 bit precision, not 16. + */ + if (in_ct == PNG_COLOR_TYPE_PALETTE || in_bd < 16) + in_sample_depth = 8; + else + in_sample_depth = in_bd; + + if (sample_depth != 16 || in_sample_depth > 8 || + !dp->pm->calculations_use_input_precision) + digitization_error = .5; + + /* Else calculations are at 8 bit precision, and the output actually + * consists of scaled 8-bit values, so scale .5 in 8 bits to the 16 bits: + */ + else + digitization_error = .5 * 257; + } + + for (y=0; ythis.palette, + NULL); + + in_pixel.red_sBIT = red_sBIT; + in_pixel.green_sBIT = green_sBIT; + in_pixel.blue_sBIT = blue_sBIT; + in_pixel.alpha_sBIT = alpha_sBIT; + in_pixel.have_tRNS = have_tRNS != 0; + + /* For error detection, below. */ + r = in_pixel.red; + g = in_pixel.green; + b = in_pixel.blue; + a = in_pixel.alpha; + + /* This applies the transforms to the input data, including output + * format operations which must be used when reading the output + * pixel that libpng produces. + */ + dp->transform_list->mod(dp->transform_list, &in_pixel, pp, dp); + + /* Read the output pixel and compare it to what we got, we don't + * use the error field here, so no need to update sBIT. in_pixel + * says whether we expect libpng to change the output format. + */ + image_pixel_init(&out_pixel, pRow, out_ct, out_bd, x, out_palette, + &in_pixel); + + /* We don't expect changes to the index here even if the bit depth is + * changed. + */ + if (in_ct == PNG_COLOR_TYPE_PALETTE && + out_ct == PNG_COLOR_TYPE_PALETTE) + { + if (in_pixel.palette_index != out_pixel.palette_index) + png_error(pp, "unexpected transformed palette index"); + } + + /* Check the colours for palette images too - in fact the palette could + * be separately verified itself in most cases. + */ + if (in_pixel.red != out_pixel.red) + transform_range_check(pp, r, g, b, a, in_pixel.red, in_pixel.redf, + out_pixel.red, sample_depth, in_pixel.rede, + dp->pm->limit + 1./(2*((1U<pm->limit + 1./(2*((1U<pm->limit + 1./(2*((1U<pm->limit + 1./(2*((1U<this.ps->validated = 1; +} + +static void PNGCBAPI +transform_end(png_structp ppIn, png_infop pi) +{ + png_const_structp pp = ppIn; + transform_display *dp = voidcast(transform_display*, + png_get_progressive_ptr(pp)); + + if (!dp->this.speed) + transform_image_validate(dp, pp, pi); + else + dp->this.ps->validated = 1; +} + +/* A single test run. */ +static void +transform_test(png_modifier *pmIn, const png_uint_32 idIn, + const image_transform* transform_listIn, const char * const name) +{ + transform_display d; + context(&pmIn->this, fault); + + transform_display_init(&d, pmIn, idIn, transform_listIn); + + Try + { + size_t pos = 0; + png_structp pp; + png_infop pi; + char full_name[256]; + + /* Make sure the encoding fields are correct and enter the required + * modifications. + */ + transform_set_encoding(&d); + + /* Add any modifications required by the transform list. */ + d.transform_list->ini(d.transform_list, &d); + + /* Add the color space information, if any, to the name. */ + pos = safecat(full_name, sizeof full_name, pos, name); + pos = safecat_current_encoding(full_name, sizeof full_name, pos, d.pm); + + /* Get a png_struct for reading the image. */ + pp = set_modifier_for_read(d.pm, &pi, d.this.id, full_name); + standard_palette_init(&d.this); + +# if 0 + /* Logging (debugging only) */ + { + char buffer[256]; + + (void)store_message(&d.pm->this, pp, buffer, sizeof buffer, 0, + "running test"); + + fprintf(stderr, "%s\n", buffer); + } +# endif + + /* Introduce the correct read function. */ + if (d.pm->this.progressive) + { + /* Share the row function with the standard implementation. */ + png_set_progressive_read_fn(pp, &d, transform_info, progressive_row, + transform_end); + + /* Now feed data into the reader until we reach the end: */ + modifier_progressive_read(d.pm, pp, pi); + } + else + { + /* modifier_read expects a png_modifier* */ + png_set_read_fn(pp, d.pm, modifier_read); + + /* Check the header values: */ + png_read_info(pp, pi); + + /* Process the 'info' requirements. Only one image is generated */ + transform_info_imp(&d, pp, pi); + + sequential_row(&d.this, pp, pi, -1, 0); + + if (!d.this.speed) + transform_image_validate(&d, pp, pi); + else + d.this.ps->validated = 1; + } + + modifier_reset(d.pm); + } + + Catch(fault) + { + modifier_reset(voidcast(png_modifier*,(void*)fault)); + } +} + +/* The transforms: */ +#define ITSTRUCT(name) image_transform_##name +#define ITDATA(name) image_transform_data_##name +#define image_transform_ini image_transform_default_ini +#define IT(name)\ +static image_transform ITSTRUCT(name) =\ +{\ + #name,\ + 1, /*enable*/\ + &PT, /*list*/\ + 0, /*global_use*/\ + 0, /*local_use*/\ + 0, /*next*/\ + image_transform_ini,\ + image_transform_png_set_##name##_set,\ + image_transform_png_set_##name##_mod,\ + image_transform_png_set_##name##_add\ +} +#define PT ITSTRUCT(end) /* stores the previous transform */ + +/* To save code: */ +extern void image_transform_default_ini(const image_transform *this, + transform_display *that); /* silence GCC warnings */ + +void /* private, but almost always needed */ +image_transform_default_ini(const image_transform *this, + transform_display *that) +{ + this->next->ini(this->next, that); +} + +#ifdef PNG_READ_BACKGROUND_SUPPORTED +static int +image_transform_default_add(image_transform *this, + const image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + UNUSED(colour_type) + UNUSED(bit_depth) + + this->next = *that; + *that = this; + + return 1; +} +#endif + +#ifdef PNG_READ_EXPAND_SUPPORTED +/* png_set_palette_to_rgb */ +static void +image_transform_png_set_palette_to_rgb_set(const image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + png_set_palette_to_rgb(pp); + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_palette_to_rgb_mod(const image_transform *this, + image_pixel *that, png_const_structp pp, + const transform_display *display) +{ + if (that->colour_type == PNG_COLOR_TYPE_PALETTE) + image_pixel_convert_PLTE(that); + + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_palette_to_rgb_add(image_transform *this, + const image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + UNUSED(bit_depth) + + this->next = *that; + *that = this; + + return colour_type == PNG_COLOR_TYPE_PALETTE; +} + +IT(palette_to_rgb); +#undef PT +#define PT ITSTRUCT(palette_to_rgb) +#endif /* PNG_READ_EXPAND_SUPPORTED */ + +#ifdef PNG_READ_EXPAND_SUPPORTED +/* png_set_tRNS_to_alpha */ +static void +image_transform_png_set_tRNS_to_alpha_set(const image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + png_set_tRNS_to_alpha(pp); + + /* If there was a tRNS chunk that would get expanded and add an alpha + * channel is_transparent must be updated: + */ + if (that->this.has_tRNS) + that->this.is_transparent = 1; + + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_tRNS_to_alpha_mod(const image_transform *this, + image_pixel *that, png_const_structp pp, + const transform_display *display) +{ +#if PNG_LIBPNG_VER < 10700 + /* LIBPNG BUG: this always forces palette images to RGB. */ + if (that->colour_type == PNG_COLOR_TYPE_PALETTE) + image_pixel_convert_PLTE(that); +#endif + + /* This effectively does an 'expand' only if there is some transparency to + * convert to an alpha channel. + */ + if (that->have_tRNS) +# if PNG_LIBPNG_VER >= 10700 + if (that->colour_type != PNG_COLOR_TYPE_PALETTE && + (that->colour_type & PNG_COLOR_MASK_ALPHA) == 0) +# endif + image_pixel_add_alpha(that, &display->this, 0/*!for background*/); + +#if PNG_LIBPNG_VER < 10700 + /* LIBPNG BUG: otherwise libpng still expands to 8 bits! */ + else + { + if (that->bit_depth < 8) + that->bit_depth =8; + if (that->sample_depth < 8) + that->sample_depth = 8; + } +#endif + + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_tRNS_to_alpha_add(image_transform *this, + const image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + UNUSED(bit_depth) + + this->next = *that; + *that = this; + + /* We don't know yet whether there will be a tRNS chunk, but we know that + * this transformation should do nothing if there already is an alpha + * channel. In addition, after the bug fix in 1.7.0, there is no longer + * any action on a palette image. + */ + return +# if PNG_LIBPNG_VER >= 10700 + colour_type != PNG_COLOR_TYPE_PALETTE && +# endif + (colour_type & PNG_COLOR_MASK_ALPHA) == 0; +} + +IT(tRNS_to_alpha); +#undef PT +#define PT ITSTRUCT(tRNS_to_alpha) +#endif /* PNG_READ_EXPAND_SUPPORTED */ + +#ifdef PNG_READ_GRAY_TO_RGB_SUPPORTED +/* png_set_gray_to_rgb */ +static void +image_transform_png_set_gray_to_rgb_set(const image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + png_set_gray_to_rgb(pp); + /* NOTE: this doesn't result in tRNS expansion. */ + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_gray_to_rgb_mod(const image_transform *this, + image_pixel *that, png_const_structp pp, + const transform_display *display) +{ + /* NOTE: we can actually pend the tRNS processing at this point because we + * can correctly recognize the original pixel value even though we have + * mapped the one gray channel to the three RGB ones, but in fact libpng + * doesn't do this, so we don't either. + */ + if ((that->colour_type & PNG_COLOR_MASK_COLOR) == 0 && that->have_tRNS) + image_pixel_add_alpha(that, &display->this, 0/*!for background*/); + + /* Simply expand the bit depth and alter the colour type as required. */ + if (that->colour_type == PNG_COLOR_TYPE_GRAY) + { + /* RGB images have a bit depth at least equal to '8' */ + if (that->bit_depth < 8) + that->sample_depth = that->bit_depth = 8; + + /* And just changing the colour type works here because the green and blue + * channels are being maintained in lock-step with the red/gray: + */ + that->colour_type = PNG_COLOR_TYPE_RGB; + } + + else if (that->colour_type == PNG_COLOR_TYPE_GRAY_ALPHA) + that->colour_type = PNG_COLOR_TYPE_RGB_ALPHA; + + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_gray_to_rgb_add(image_transform *this, + const image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + UNUSED(bit_depth) + + this->next = *that; + *that = this; + + return (colour_type & PNG_COLOR_MASK_COLOR) == 0; +} + +IT(gray_to_rgb); +#undef PT +#define PT ITSTRUCT(gray_to_rgb) +#endif /* PNG_READ_GRAY_TO_RGB_SUPPORTED */ + +#ifdef PNG_READ_EXPAND_SUPPORTED +/* png_set_expand */ +static void +image_transform_png_set_expand_set(const image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + png_set_expand(pp); + + if (that->this.has_tRNS) + that->this.is_transparent = 1; + + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_expand_mod(const image_transform *this, + image_pixel *that, png_const_structp pp, + const transform_display *display) +{ + /* The general expand case depends on what the colour type is: */ + if (that->colour_type == PNG_COLOR_TYPE_PALETTE) + image_pixel_convert_PLTE(that); + else if (that->bit_depth < 8) /* grayscale */ + that->sample_depth = that->bit_depth = 8; + + if (that->have_tRNS) + image_pixel_add_alpha(that, &display->this, 0/*!for background*/); + + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_expand_add(image_transform *this, + const image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + UNUSED(bit_depth) + + this->next = *that; + *that = this; + + /* 'expand' should do nothing for RGBA or GA input - no tRNS and the bit + * depth is at least 8 already. + */ + return (colour_type & PNG_COLOR_MASK_ALPHA) == 0; +} + +IT(expand); +#undef PT +#define PT ITSTRUCT(expand) +#endif /* PNG_READ_EXPAND_SUPPORTED */ + +#ifdef PNG_READ_EXPAND_SUPPORTED +/* png_set_expand_gray_1_2_4_to_8 + * Pre 1.7.0 LIBPNG BUG: this just does an 'expand' + */ +static void +image_transform_png_set_expand_gray_1_2_4_to_8_set( + const image_transform *this, transform_display *that, png_structp pp, + png_infop pi) +{ + png_set_expand_gray_1_2_4_to_8(pp); + /* NOTE: don't expect this to expand tRNS */ + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_expand_gray_1_2_4_to_8_mod( + const image_transform *this, image_pixel *that, png_const_structp pp, + const transform_display *display) +{ +#if PNG_LIBPNG_VER < 10700 + image_transform_png_set_expand_mod(this, that, pp, display); +#else + /* Only expand grayscale of bit depth less than 8: */ + if (that->colour_type == PNG_COLOR_TYPE_GRAY && + that->bit_depth < 8) + that->sample_depth = that->bit_depth = 8; + + this->next->mod(this->next, that, pp, display); +#endif /* 1.7 or later */ +} + +static int +image_transform_png_set_expand_gray_1_2_4_to_8_add(image_transform *this, + const image_transform **that, png_byte colour_type, png_byte bit_depth) +{ +#if PNG_LIBPNG_VER < 10700 + return image_transform_png_set_expand_add(this, that, colour_type, + bit_depth); +#else + UNUSED(bit_depth) + + this->next = *that; + *that = this; + + /* This should do nothing unless the color type is gray and the bit depth is + * less than 8: + */ + return colour_type == PNG_COLOR_TYPE_GRAY && bit_depth < 8; +#endif /* 1.7 or later */ +} + +IT(expand_gray_1_2_4_to_8); +#undef PT +#define PT ITSTRUCT(expand_gray_1_2_4_to_8) +#endif /* PNG_READ_EXPAND_SUPPORTED */ + +#ifdef PNG_READ_EXPAND_16_SUPPORTED +/* png_set_expand_16 */ +static void +image_transform_png_set_expand_16_set(const image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + png_set_expand_16(pp); + + /* NOTE: prior to 1.7 libpng does SET_EXPAND as well, so tRNS is expanded. */ +# if PNG_LIBPNG_VER < 10700 + if (that->this.has_tRNS) + that->this.is_transparent = 1; +# endif + + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_expand_16_mod(const image_transform *this, + image_pixel *that, png_const_structp pp, + const transform_display *display) +{ + /* Expect expand_16 to expand everything to 16 bits as a result of also + * causing 'expand' to happen. + */ + if (that->colour_type == PNG_COLOR_TYPE_PALETTE) + image_pixel_convert_PLTE(that); + + if (that->have_tRNS) + image_pixel_add_alpha(that, &display->this, 0/*!for background*/); + + if (that->bit_depth < 16) + that->sample_depth = that->bit_depth = 16; + + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_expand_16_add(image_transform *this, + const image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + UNUSED(colour_type) + + this->next = *that; + *that = this; + + /* expand_16 does something unless the bit depth is already 16. */ + return bit_depth < 16; +} + +IT(expand_16); +#undef PT +#define PT ITSTRUCT(expand_16) +#endif /* PNG_READ_EXPAND_16_SUPPORTED */ + +#ifdef PNG_READ_SCALE_16_TO_8_SUPPORTED /* API added in 1.5.4 */ +/* png_set_scale_16 */ +static void +image_transform_png_set_scale_16_set(const image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + png_set_scale_16(pp); +# if PNG_LIBPNG_VER < 10700 + /* libpng will limit the gamma table size: */ + that->max_gamma_8 = PNG_MAX_GAMMA_8; +# endif + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_scale_16_mod(const image_transform *this, + image_pixel *that, png_const_structp pp, + const transform_display *display) +{ + if (that->bit_depth == 16) + { + that->sample_depth = that->bit_depth = 8; + if (that->red_sBIT > 8) that->red_sBIT = 8; + if (that->green_sBIT > 8) that->green_sBIT = 8; + if (that->blue_sBIT > 8) that->blue_sBIT = 8; + if (that->alpha_sBIT > 8) that->alpha_sBIT = 8; + } + + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_scale_16_add(image_transform *this, + const image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + UNUSED(colour_type) + + this->next = *that; + *that = this; + + return bit_depth > 8; +} + +IT(scale_16); +#undef PT +#define PT ITSTRUCT(scale_16) +#endif /* PNG_READ_SCALE_16_TO_8_SUPPORTED (1.5.4 on) */ + +#ifdef PNG_READ_16_TO_8_SUPPORTED /* the default before 1.5.4 */ +/* png_set_strip_16 */ +static void +image_transform_png_set_strip_16_set(const image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + png_set_strip_16(pp); +# if PNG_LIBPNG_VER < 10700 + /* libpng will limit the gamma table size: */ + that->max_gamma_8 = PNG_MAX_GAMMA_8; +# endif + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_strip_16_mod(const image_transform *this, + image_pixel *that, png_const_structp pp, + const transform_display *display) +{ + if (that->bit_depth == 16) + { + that->sample_depth = that->bit_depth = 8; + if (that->red_sBIT > 8) that->red_sBIT = 8; + if (that->green_sBIT > 8) that->green_sBIT = 8; + if (that->blue_sBIT > 8) that->blue_sBIT = 8; + if (that->alpha_sBIT > 8) that->alpha_sBIT = 8; + + /* Prior to 1.5.4 png_set_strip_16 would use an 'accurate' method if this + * configuration option is set. From 1.5.4 the flag is never set and the + * 'scale' API (above) must be used. + */ +# ifdef PNG_READ_ACCURATE_SCALE_SUPPORTED +# if PNG_LIBPNG_VER >= 10504 +# error PNG_READ_ACCURATE_SCALE should not be set +# endif + + /* The strip 16 algorithm drops the low 8 bits rather than calculating + * 1/257, so we need to adjust the permitted errors appropriately: + * Notice that this is only relevant prior to the addition of the + * png_set_scale_16 API in 1.5.4 (but 1.5.4+ always defines the above!) + */ + { + const double d = (255-128.5)/65535; + that->rede += d; + that->greene += d; + that->bluee += d; + that->alphae += d; + } +# endif + } + + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_strip_16_add(image_transform *this, + const image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + UNUSED(colour_type) + + this->next = *that; + *that = this; + + return bit_depth > 8; +} + +IT(strip_16); +#undef PT +#define PT ITSTRUCT(strip_16) +#endif /* PNG_READ_16_TO_8_SUPPORTED */ + +#ifdef PNG_READ_STRIP_ALPHA_SUPPORTED +/* png_set_strip_alpha */ +static void +image_transform_png_set_strip_alpha_set(const image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + png_set_strip_alpha(pp); + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_strip_alpha_mod(const image_transform *this, + image_pixel *that, png_const_structp pp, + const transform_display *display) +{ + if (that->colour_type == PNG_COLOR_TYPE_GRAY_ALPHA) + that->colour_type = PNG_COLOR_TYPE_GRAY; + else if (that->colour_type == PNG_COLOR_TYPE_RGB_ALPHA) + that->colour_type = PNG_COLOR_TYPE_RGB; + + that->have_tRNS = 0; + that->alphaf = 1; + + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_strip_alpha_add(image_transform *this, + const image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + UNUSED(bit_depth) + + this->next = *that; + *that = this; + + return (colour_type & PNG_COLOR_MASK_ALPHA) != 0; +} + +IT(strip_alpha); +#undef PT +#define PT ITSTRUCT(strip_alpha) +#endif /* PNG_READ_STRIP_ALPHA_SUPPORTED */ + +#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED +/* png_set_rgb_to_gray(png_structp, int err_action, double red, double green) + * png_set_rgb_to_gray_fixed(png_structp, int err_action, png_fixed_point red, + * png_fixed_point green) + * png_get_rgb_to_gray_status + * + * The 'default' test here uses values known to be used inside libpng prior to + * 1.7.0: + * + * red: 6968 + * green: 23434 + * blue: 2366 + * + * These values are being retained for compatibility, along with the somewhat + * broken truncation calculation in the fast-and-inaccurate code path. Older + * versions of libpng will fail the accuracy tests below because they use the + * truncation algorithm everywhere. + */ +#define data ITDATA(rgb_to_gray) +static struct +{ + double gamma; /* File gamma to use in processing */ + + /* The following are the parameters for png_set_rgb_to_gray: */ +# ifdef PNG_FLOATING_POINT_SUPPORTED + double red_to_set; + double green_to_set; +# else + png_fixed_point red_to_set; + png_fixed_point green_to_set; +# endif + + /* The actual coefficients: */ + double red_coefficient; + double green_coefficient; + double blue_coefficient; + + /* Set if the coeefficients have been overridden. */ + int coefficients_overridden; +} data; + +#undef image_transform_ini +#define image_transform_ini image_transform_png_set_rgb_to_gray_ini +static void +image_transform_png_set_rgb_to_gray_ini(const image_transform *this, + transform_display *that) +{ + png_modifier *pm = that->pm; + const color_encoding *e = pm->current_encoding; + + UNUSED(this) + + /* Since we check the encoding this flag must be set: */ + pm->test_uses_encoding = 1; + + /* If 'e' is not NULL chromaticity information is present and either a cHRM + * or an sRGB chunk will be inserted. + */ + if (e != 0) + { + /* Coefficients come from the encoding, but may need to be normalized to a + * white point Y of 1.0 + */ + const double whiteY = e->red.Y + e->green.Y + e->blue.Y; + + data.red_coefficient = e->red.Y; + data.green_coefficient = e->green.Y; + data.blue_coefficient = e->blue.Y; + + if (whiteY != 1) + { + data.red_coefficient /= whiteY; + data.green_coefficient /= whiteY; + data.blue_coefficient /= whiteY; + } + } + + else + { + /* The default (built in) coeffcients, as above: */ +# if PNG_LIBPNG_VER < 10700 + data.red_coefficient = 6968 / 32768.; + data.green_coefficient = 23434 / 32768.; + data.blue_coefficient = 2366 / 32768.; +# else + data.red_coefficient = .2126; + data.green_coefficient = .7152; + data.blue_coefficient = .0722; +# endif + } + + data.gamma = pm->current_gamma; + + /* If not set then the calculations assume linear encoding (implicitly): */ + if (data.gamma == 0) + data.gamma = 1; + + /* The arguments to png_set_rgb_to_gray can override the coefficients implied + * by the color space encoding. If doing exhaustive checks do the override + * in each case, otherwise do it randomly. + */ + if (pm->test_exhaustive) + { + /* First time in coefficients_overridden is 0, the following sets it to 1, + * so repeat if it is set. If a test fails this may mean we subsequently + * skip a non-override test, ignore that. + */ + data.coefficients_overridden = !data.coefficients_overridden; + pm->repeat = data.coefficients_overridden != 0; + } + + else + data.coefficients_overridden = random_choice(); + + if (data.coefficients_overridden) + { + /* These values override the color encoding defaults, simply use random + * numbers. + */ + png_uint_32 ru; + double total; + + R32(ru); + data.green_coefficient = total = (ru & 0xffff) / 65535.; + ru >>= 16; + data.red_coefficient = (1 - total) * (ru & 0xffff) / 65535.; + total += data.red_coefficient; + data.blue_coefficient = 1 - total; + +# ifdef PNG_FLOATING_POINT_SUPPORTED + data.red_to_set = data.red_coefficient; + data.green_to_set = data.green_coefficient; +# else + data.red_to_set = fix(data.red_coefficient); + data.green_to_set = fix(data.green_coefficient); +# endif + + /* The following just changes the error messages: */ + pm->encoding_ignored = 1; + } + + else + { + data.red_to_set = -1; + data.green_to_set = -1; + } + + /* Adjust the error limit in the png_modifier because of the larger errors + * produced in the digitization during the gamma handling. + */ + if (data.gamma != 1) /* Use gamma tables */ + { + if (that->this.bit_depth == 16 || pm->assume_16_bit_calculations) + { + /* The computations have the form: + * + * r * rc + g * gc + b * bc + * + * Each component of which is +/-1/65535 from the gamma_to_1 table + * lookup, resulting in a base error of +/-6. The gamma_from_1 + * conversion adds another +/-2 in the 16-bit case and + * +/-(1<<(15-PNG_MAX_GAMMA_8)) in the 8-bit case. + */ +# if PNG_LIBPNG_VER < 10700 + if (that->this.bit_depth < 16) + that->max_gamma_8 = PNG_MAX_GAMMA_8; +# endif + that->pm->limit += pow( + (that->this.bit_depth == 16 || that->max_gamma_8 > 14 ? + 8. : + 6. + (1<<(15-that->max_gamma_8)) + )/65535, data.gamma); + } + + else + { + /* Rounding to 8 bits in the linear space causes massive errors which + * will trigger the error check in transform_range_check. Fix that + * here by taking the gamma encoding into account. + * + * When DIGITIZE is set because a pre-1.7 version of libpng is being + * tested allow a bigger slack. + * + * NOTE: this number only affects the internal limit check in pngvalid, + * it has no effect on the limits applied to the libpng values. + */ + that->pm->limit += pow( +# if DIGITIZE + 2.0 +# else + 1.0 +# endif + /255, data.gamma); + } + } + + else + { + /* With no gamma correction a large error comes from the truncation of the + * calculation in the 8 bit case, allow for that here. + */ + if (that->this.bit_depth != 16 && !pm->assume_16_bit_calculations) + that->pm->limit += 4E-3; + } +} + +static void +image_transform_png_set_rgb_to_gray_set(const image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + const int error_action = 1; /* no error, no defines in png.h */ + +# ifdef PNG_FLOATING_POINT_SUPPORTED + png_set_rgb_to_gray(pp, error_action, data.red_to_set, data.green_to_set); +# else + png_set_rgb_to_gray_fixed(pp, error_action, data.red_to_set, + data.green_to_set); +# endif + +# ifdef PNG_READ_cHRM_SUPPORTED + if (that->pm->current_encoding != 0) + { + /* We have an encoding so a cHRM chunk may have been set; if so then + * check that the libpng APIs give the correct (X,Y,Z) values within + * some margin of error for the round trip through the chromaticity + * form. + */ +# ifdef PNG_FLOATING_POINT_SUPPORTED +# define API_function png_get_cHRM_XYZ +# define API_form "FP" +# define API_type double +# define API_cvt(x) (x) +# else +# define API_function png_get_cHRM_XYZ_fixed +# define API_form "fixed" +# define API_type png_fixed_point +# define API_cvt(x) ((double)(x)/PNG_FP_1) +# endif + + API_type rX, gX, bX; + API_type rY, gY, bY; + API_type rZ, gZ, bZ; + + if ((API_function(pp, pi, &rX, &rY, &rZ, &gX, &gY, &gZ, &bX, &bY, &bZ) + & PNG_INFO_cHRM) != 0) + { + double maxe; + const char *el; + color_encoding e, o; + + /* Expect libpng to return a normalized result, but the original + * color space encoding may not be normalized. + */ + modifier_current_encoding(that->pm, &o); + normalize_color_encoding(&o); + + /* Sanity check the pngvalid code - the coefficients should match + * the normalized Y values of the encoding unless they were + * overridden. + */ + if (data.red_to_set == -1 && data.green_to_set == -1 && + (fabs(o.red.Y - data.red_coefficient) > DBL_EPSILON || + fabs(o.green.Y - data.green_coefficient) > DBL_EPSILON || + fabs(o.blue.Y - data.blue_coefficient) > DBL_EPSILON)) + png_error(pp, "internal pngvalid cHRM coefficient error"); + + /* Generate a colour space encoding. */ + e.gamma = o.gamma; /* not used */ + e.red.X = API_cvt(rX); + e.red.Y = API_cvt(rY); + e.red.Z = API_cvt(rZ); + e.green.X = API_cvt(gX); + e.green.Y = API_cvt(gY); + e.green.Z = API_cvt(gZ); + e.blue.X = API_cvt(bX); + e.blue.Y = API_cvt(bY); + e.blue.Z = API_cvt(bZ); + + /* This should match the original one from the png_modifier, within + * the range permitted by the libpng fixed point representation. + */ + maxe = 0; + el = "-"; /* Set to element name with error */ + +# define CHECK(col,x)\ + {\ + double err = fabs(o.col.x - e.col.x);\ + if (err > maxe)\ + {\ + maxe = err;\ + el = #col "(" #x ")";\ + }\ + } + + CHECK(red,X) + CHECK(red,Y) + CHECK(red,Z) + CHECK(green,X) + CHECK(green,Y) + CHECK(green,Z) + CHECK(blue,X) + CHECK(blue,Y) + CHECK(blue,Z) + + /* Here in both fixed and floating cases to check the values read + * from the cHRm chunk. PNG uses fixed point in the cHRM chunk, so + * we can't expect better than +/-.5E-5 on the result, allow 1E-5. + */ + if (maxe >= 1E-5) + { + size_t pos = 0; + char buffer[256]; + + pos = safecat(buffer, sizeof buffer, pos, API_form); + pos = safecat(buffer, sizeof buffer, pos, " cHRM "); + pos = safecat(buffer, sizeof buffer, pos, el); + pos = safecat(buffer, sizeof buffer, pos, " error: "); + pos = safecatd(buffer, sizeof buffer, pos, maxe, 7); + pos = safecat(buffer, sizeof buffer, pos, " "); + /* Print the color space without the gamma value: */ + pos = safecat_color_encoding(buffer, sizeof buffer, pos, &o, 0); + pos = safecat(buffer, sizeof buffer, pos, " -> "); + pos = safecat_color_encoding(buffer, sizeof buffer, pos, &e, 0); + + png_error(pp, buffer); + } + } + } +# endif /* READ_cHRM */ + + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_rgb_to_gray_mod(const image_transform *this, + image_pixel *that, png_const_structp pp, + const transform_display *display) +{ + if ((that->colour_type & PNG_COLOR_MASK_COLOR) != 0) + { + double gray, err; + +# if PNG_LIBPNG_VER < 10700 + if (that->colour_type == PNG_COLOR_TYPE_PALETTE) + image_pixel_convert_PLTE(that); +# endif + + /* Image now has RGB channels... */ +# if DIGITIZE + { + png_modifier *pm = display->pm; + const unsigned int sample_depth = that->sample_depth; + const unsigned int calc_depth = (pm->assume_16_bit_calculations ? 16 : + sample_depth); + const unsigned int gamma_depth = + (sample_depth == 16 ? + display->max_gamma_8 : + (pm->assume_16_bit_calculations ? + display->max_gamma_8 : + sample_depth)); + int isgray; + double r, g, b; + double rlo, rhi, glo, ghi, blo, bhi, graylo, grayhi; + + /* Do this using interval arithmetic, otherwise it is too difficult to + * handle the errors correctly. + * + * To handle the gamma correction work out the upper and lower bounds + * of the digitized value. Assume rounding here - normally the values + * will be identical after this operation if there is only one + * transform, feel free to delete the png_error checks on this below in + * the future (this is just me trying to ensure it works!) + * + * Interval arithmetic is exact, but to implement it it must be + * possible to control the floating point implementation rounding mode. + * This cannot be done in ANSI-C, so instead I reduce the 'lo' values + * by DBL_EPSILON and increase the 'hi' values by the same. + */ +# define DD(v,d,r) (digitize(v*(1-DBL_EPSILON), d, r) * (1-DBL_EPSILON)) +# define DU(v,d,r) (digitize(v*(1+DBL_EPSILON), d, r) * (1+DBL_EPSILON)) + + r = rlo = rhi = that->redf; + rlo -= that->rede; + rlo = DD(rlo, calc_depth, 1/*round*/); + rhi += that->rede; + rhi = DU(rhi, calc_depth, 1/*round*/); + + g = glo = ghi = that->greenf; + glo -= that->greene; + glo = DD(glo, calc_depth, 1/*round*/); + ghi += that->greene; + ghi = DU(ghi, calc_depth, 1/*round*/); + + b = blo = bhi = that->bluef; + blo -= that->bluee; + blo = DD(blo, calc_depth, 1/*round*/); + bhi += that->bluee; + bhi = DU(bhi, calc_depth, 1/*round*/); + + isgray = r==g && g==b; + + if (data.gamma != 1) + { + const double power = 1/data.gamma; + const double abse = .5/(sample_depth == 16 ? 65535 : 255); + + /* If a gamma calculation is done it is done using lookup tables of + * precision gamma_depth, so the already digitized value above may + * need to be further digitized here. + */ + if (gamma_depth != calc_depth) + { + rlo = DD(rlo, gamma_depth, 0/*truncate*/); + rhi = DU(rhi, gamma_depth, 0/*truncate*/); + glo = DD(glo, gamma_depth, 0/*truncate*/); + ghi = DU(ghi, gamma_depth, 0/*truncate*/); + blo = DD(blo, gamma_depth, 0/*truncate*/); + bhi = DU(bhi, gamma_depth, 0/*truncate*/); + } + + /* 'abse' is the error in the gamma table calculation itself. */ + r = pow(r, power); + rlo = DD(pow(rlo, power)-abse, calc_depth, 1); + rhi = DU(pow(rhi, power)+abse, calc_depth, 1); + + g = pow(g, power); + glo = DD(pow(glo, power)-abse, calc_depth, 1); + ghi = DU(pow(ghi, power)+abse, calc_depth, 1); + + b = pow(b, power); + blo = DD(pow(blo, power)-abse, calc_depth, 1); + bhi = DU(pow(bhi, power)+abse, calc_depth, 1); + } + + /* Now calculate the actual gray values. Although the error in the + * coefficients depends on whether they were specified on the command + * line (in which case truncation to 15 bits happened) or not (rounding + * was used) the maxium error in an individual coefficient is always + * 2/32768, because even in the rounding case the requirement that + * coefficients add up to 32768 can cause a larger rounding error. + * + * The only time when rounding doesn't occur in 1.5.5 and later is when + * the non-gamma code path is used for less than 16 bit data. + */ + gray = r * data.red_coefficient + g * data.green_coefficient + + b * data.blue_coefficient; + + { + const int do_round = data.gamma != 1 || calc_depth == 16; + const double ce = 2. / 32768; + + graylo = DD(rlo * (data.red_coefficient-ce) + + glo * (data.green_coefficient-ce) + + blo * (data.blue_coefficient-ce), calc_depth, do_round); + if (graylo > gray) /* always accept the right answer */ + graylo = gray; + + grayhi = DU(rhi * (data.red_coefficient+ce) + + ghi * (data.green_coefficient+ce) + + bhi * (data.blue_coefficient+ce), calc_depth, do_round); + if (grayhi < gray) + grayhi = gray; + } + + /* And invert the gamma. */ + if (data.gamma != 1) + { + const double power = data.gamma; + + /* And this happens yet again, shifting the values once more. */ + if (gamma_depth != sample_depth) + { + rlo = DD(rlo, gamma_depth, 0/*truncate*/); + rhi = DU(rhi, gamma_depth, 0/*truncate*/); + glo = DD(glo, gamma_depth, 0/*truncate*/); + ghi = DU(ghi, gamma_depth, 0/*truncate*/); + blo = DD(blo, gamma_depth, 0/*truncate*/); + bhi = DU(bhi, gamma_depth, 0/*truncate*/); + } + + gray = pow(gray, power); + graylo = DD(pow(graylo, power), sample_depth, 1); + grayhi = DU(pow(grayhi, power), sample_depth, 1); + } + +# undef DD +# undef DU + + /* Now the error can be calculated. + * + * If r==g==b because there is no overall gamma correction libpng + * currently preserves the original value. + */ + if (isgray) + err = (that->rede + that->greene + that->bluee)/3; + + else + { + err = fabs(grayhi-gray); + + if (fabs(gray - graylo) > err) + err = fabs(graylo-gray); + +#if !RELEASE_BUILD + /* Check that this worked: */ + if (err > pm->limit) + { + size_t pos = 0; + char buffer[128]; + + pos = safecat(buffer, sizeof buffer, pos, "rgb_to_gray error "); + pos = safecatd(buffer, sizeof buffer, pos, err, 6); + pos = safecat(buffer, sizeof buffer, pos, " exceeds limit "); + pos = safecatd(buffer, sizeof buffer, pos, pm->limit, 6); + png_warning(pp, buffer); + pm->limit = err; + } +#endif /* !RELEASE_BUILD */ + } + } +# else /* !DIGITIZE */ + { + double r = that->redf; + double re = that->rede; + double g = that->greenf; + double ge = that->greene; + double b = that->bluef; + double be = that->bluee; + +# if PNG_LIBPNG_VER < 10700 + /* The true gray case involves no math in earlier versions (not + * true, there was some if gamma correction was happening too.) + */ + if (r == g && r == b) + { + gray = r; + err = re; + if (err < ge) err = ge; + if (err < be) err = be; + } + + else +# endif /* before 1.7 */ + if (data.gamma == 1) + { + /* There is no need to do the conversions to and from linear space, + * so the calculation should be a lot more accurate. There is a + * built in error in the coefficients because they only have 15 bits + * and are adjusted to make sure they add up to 32768. This + * involves a integer calculation with truncation of the form: + * + * ((int)(coefficient * 100000) * 32768)/100000 + * + * This is done to the red and green coefficients (the ones + * provided to the API) then blue is calculated from them so the + * result adds up to 32768. In the worst case this can result in + * a -1 error in red and green and a +2 error in blue. Consequently + * the worst case in the calculation below is 2/32768 error. + * + * TODO: consider fixing this in libpng by rounding the calculation + * limiting the error to 1/32768. + * + * Handling this by adding 2/32768 here avoids needing to increase + * the global error limits to take this into account.) + */ + gray = r * data.red_coefficient + g * data.green_coefficient + + b * data.blue_coefficient; + err = re * data.red_coefficient + ge * data.green_coefficient + + be * data.blue_coefficient + 2./32768 + gray * 5 * DBL_EPSILON; + } + + else + { + /* The calculation happens in linear space, and this produces much + * wider errors in the encoded space. These are handled here by + * factoring the errors in to the calculation. There are two table + * lookups in the calculation and each introduces a quantization + * error defined by the table size. + */ + png_modifier *pm = display->pm; + double in_qe = (that->sample_depth > 8 ? .5/65535 : .5/255); + double out_qe = (that->sample_depth > 8 ? .5/65535 : + (pm->assume_16_bit_calculations ? .5/(1<max_gamma_8) : + .5/255)); + double rhi, ghi, bhi, grayhi; + double g1 = 1/data.gamma; + + rhi = r + re + in_qe; if (rhi > 1) rhi = 1; + r -= re + in_qe; if (r < 0) r = 0; + ghi = g + ge + in_qe; if (ghi > 1) ghi = 1; + g -= ge + in_qe; if (g < 0) g = 0; + bhi = b + be + in_qe; if (bhi > 1) bhi = 1; + b -= be + in_qe; if (b < 0) b = 0; + + r = pow(r, g1)*(1-DBL_EPSILON); rhi = pow(rhi, g1)*(1+DBL_EPSILON); + g = pow(g, g1)*(1-DBL_EPSILON); ghi = pow(ghi, g1)*(1+DBL_EPSILON); + b = pow(b, g1)*(1-DBL_EPSILON); bhi = pow(bhi, g1)*(1+DBL_EPSILON); + + /* Work out the lower and upper bounds for the gray value in the + * encoded space, then work out an average and error. Remove the + * previously added input quantization error at this point. + */ + gray = r * data.red_coefficient + g * data.green_coefficient + + b * data.blue_coefficient - 2./32768 - out_qe; + if (gray <= 0) + gray = 0; + else + { + gray *= (1 - 6 * DBL_EPSILON); + gray = pow(gray, data.gamma) * (1-DBL_EPSILON); + } + + grayhi = rhi * data.red_coefficient + ghi * data.green_coefficient + + bhi * data.blue_coefficient + 2./32768 + out_qe; + grayhi *= (1 + 6 * DBL_EPSILON); + if (grayhi >= 1) + grayhi = 1; + else + grayhi = pow(grayhi, data.gamma) * (1+DBL_EPSILON); + + err = (grayhi - gray) / 2; + gray = (grayhi + gray) / 2; + + if (err <= in_qe) + err = gray * DBL_EPSILON; + + else + err -= in_qe; + +#if !RELEASE_BUILD + /* Validate that the error is within limits (this has caused + * problems before, it's much easier to detect them here.) + */ + if (err > pm->limit) + { + size_t pos = 0; + char buffer[128]; + + pos = safecat(buffer, sizeof buffer, pos, "rgb_to_gray error "); + pos = safecatd(buffer, sizeof buffer, pos, err, 6); + pos = safecat(buffer, sizeof buffer, pos, " exceeds limit "); + pos = safecatd(buffer, sizeof buffer, pos, pm->limit, 6); + png_warning(pp, buffer); + pm->limit = err; + } +#endif /* !RELEASE_BUILD */ + } + } +# endif /* !DIGITIZE */ + + that->bluef = that->greenf = that->redf = gray; + that->bluee = that->greene = that->rede = err; + + /* The sBIT is the minium of the three colour channel sBITs. */ + if (that->red_sBIT > that->green_sBIT) + that->red_sBIT = that->green_sBIT; + if (that->red_sBIT > that->blue_sBIT) + that->red_sBIT = that->blue_sBIT; + that->blue_sBIT = that->green_sBIT = that->red_sBIT; + + /* And remove the colour bit in the type: */ + if (that->colour_type == PNG_COLOR_TYPE_RGB) + that->colour_type = PNG_COLOR_TYPE_GRAY; + else if (that->colour_type == PNG_COLOR_TYPE_RGB_ALPHA) + that->colour_type = PNG_COLOR_TYPE_GRAY_ALPHA; + } + + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_rgb_to_gray_add(image_transform *this, + const image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + UNUSED(bit_depth) + + this->next = *that; + *that = this; + + return (colour_type & PNG_COLOR_MASK_COLOR) != 0; +} + +#undef data +IT(rgb_to_gray); +#undef PT +#define PT ITSTRUCT(rgb_to_gray) +#undef image_transform_ini +#define image_transform_ini image_transform_default_ini +#endif /* PNG_READ_RGB_TO_GRAY_SUPPORTED */ + +#ifdef PNG_READ_BACKGROUND_SUPPORTED +/* png_set_background(png_structp, png_const_color_16p background_color, + * int background_gamma_code, int need_expand, double background_gamma) + * png_set_background_fixed(png_structp, png_const_color_16p background_color, + * int background_gamma_code, int need_expand, + * png_fixed_point background_gamma) + * + * This ignores the gamma (at present.) +*/ +#define data ITDATA(background) +static image_pixel data; + +static void +image_transform_png_set_background_set(const image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + png_byte colour_type, bit_depth; + png_byte random_bytes[8]; /* 8 bytes - 64 bits - the biggest pixel */ + int expand; + png_color_16 back; + + /* We need a background colour, because we don't know exactly what transforms + * have been set we have to supply the colour in the original file format and + * so we need to know what that is! The background colour is stored in the + * transform_display. + */ + R8(random_bytes); + + /* Read the random value, for colour type 3 the background colour is actually + * expressed as a 24bit rgb, not an index. + */ + colour_type = that->this.colour_type; + if (colour_type == 3) + { + colour_type = PNG_COLOR_TYPE_RGB; + bit_depth = 8; + expand = 0; /* passing in an RGB not a pixel index */ + } + + else + { + if (that->this.has_tRNS) + that->this.is_transparent = 1; + + bit_depth = that->this.bit_depth; + expand = 1; + } + + image_pixel_init(&data, random_bytes, colour_type, + bit_depth, 0/*x*/, 0/*unused: palette*/, NULL/*format*/); + + /* Extract the background colour from this image_pixel, but make sure the + * unused fields of 'back' are garbage. + */ + R8(back); + + if (colour_type & PNG_COLOR_MASK_COLOR) + { + back.red = (png_uint_16)data.red; + back.green = (png_uint_16)data.green; + back.blue = (png_uint_16)data.blue; + } + + else + back.gray = (png_uint_16)data.red; + +# ifdef PNG_FLOATING_POINT_SUPPORTED + png_set_background(pp, &back, PNG_BACKGROUND_GAMMA_FILE, expand, 0); +# else + png_set_background_fixed(pp, &back, PNG_BACKGROUND_GAMMA_FILE, expand, 0); +# endif + + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_background_mod(const image_transform *this, + image_pixel *that, png_const_structp pp, + const transform_display *display) +{ + /* Check for tRNS first: */ + if (that->have_tRNS && that->colour_type != PNG_COLOR_TYPE_PALETTE) + image_pixel_add_alpha(that, &display->this, 1/*for background*/); + + /* This is only necessary if the alpha value is less than 1. */ + if (that->alphaf < 1) + { + /* Now we do the background calculation without any gamma correction. */ + if (that->alphaf <= 0) + { + that->redf = data.redf; + that->greenf = data.greenf; + that->bluef = data.bluef; + + that->rede = data.rede; + that->greene = data.greene; + that->bluee = data.bluee; + + that->red_sBIT= data.red_sBIT; + that->green_sBIT= data.green_sBIT; + that->blue_sBIT= data.blue_sBIT; + } + + else /* 0 < alpha < 1 */ + { + double alf = 1 - that->alphaf; + + that->redf = that->redf * that->alphaf + data.redf * alf; + that->rede = that->rede * that->alphaf + data.rede * alf + + DBL_EPSILON; + that->greenf = that->greenf * that->alphaf + data.greenf * alf; + that->greene = that->greene * that->alphaf + data.greene * alf + + DBL_EPSILON; + that->bluef = that->bluef * that->alphaf + data.bluef * alf; + that->bluee = that->bluee * that->alphaf + data.bluee * alf + + DBL_EPSILON; + } + + /* Remove the alpha type and set the alpha (not in that order.) */ + that->alphaf = 1; + that->alphae = 0; + } + + if (that->colour_type == PNG_COLOR_TYPE_RGB_ALPHA) + that->colour_type = PNG_COLOR_TYPE_RGB; + else if (that->colour_type == PNG_COLOR_TYPE_GRAY_ALPHA) + that->colour_type = PNG_COLOR_TYPE_GRAY; + /* PNG_COLOR_TYPE_PALETTE is not changed */ + + this->next->mod(this->next, that, pp, display); +} + +#define image_transform_png_set_background_add image_transform_default_add + +#undef data +IT(background); +#undef PT +#define PT ITSTRUCT(background) +#endif /* PNG_READ_BACKGROUND_SUPPORTED */ + +/* png_set_quantize(png_structp, png_colorp palette, int num_palette, + * int maximum_colors, png_const_uint_16p histogram, int full_quantize) + * + * Very difficult to validate this! + */ +/*NOTE: TBD NYI */ + +/* The data layout transforms are handled by swapping our own channel data, + * necessarily these need to happen at the end of the transform list because the + * semantic of the channels changes after these are executed. Some of these, + * like set_shift and set_packing, can't be done at present because they change + * the layout of the data at the sub-sample level so sample() won't get the + * right answer. + */ +/* png_set_invert_alpha */ +#ifdef PNG_READ_INVERT_ALPHA_SUPPORTED +/* Invert the alpha channel + * + * png_set_invert_alpha(png_structrp png_ptr) + */ +static void +image_transform_png_set_invert_alpha_set(const image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + png_set_invert_alpha(pp); + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_invert_alpha_mod(const image_transform *this, + image_pixel *that, png_const_structp pp, + const transform_display *display) +{ + if (that->colour_type & 4) + that->alpha_inverted = 1; + + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_invert_alpha_add(image_transform *this, + const image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + UNUSED(bit_depth) + + this->next = *that; + *that = this; + + /* Only has an effect on pixels with alpha: */ + return (colour_type & 4) != 0; +} + +IT(invert_alpha); +#undef PT +#define PT ITSTRUCT(invert_alpha) + +#endif /* PNG_READ_INVERT_ALPHA_SUPPORTED */ + +/* png_set_bgr */ +#ifdef PNG_READ_BGR_SUPPORTED +/* Swap R,G,B channels to order B,G,R. + * + * png_set_bgr(png_structrp png_ptr) + * + * This only has an effect on RGB and RGBA pixels. + */ +static void +image_transform_png_set_bgr_set(const image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + png_set_bgr(pp); + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_bgr_mod(const image_transform *this, + image_pixel *that, png_const_structp pp, + const transform_display *display) +{ + if (that->colour_type == PNG_COLOR_TYPE_RGB || + that->colour_type == PNG_COLOR_TYPE_RGBA) + that->swap_rgb = 1; + + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_bgr_add(image_transform *this, + const image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + UNUSED(bit_depth) + + this->next = *that; + *that = this; + + return colour_type == PNG_COLOR_TYPE_RGB || + colour_type == PNG_COLOR_TYPE_RGBA; +} + +IT(bgr); +#undef PT +#define PT ITSTRUCT(bgr) + +#endif /* PNG_READ_BGR_SUPPORTED */ + +/* png_set_swap_alpha */ +#ifdef PNG_READ_SWAP_ALPHA_SUPPORTED +/* Put the alpha channel first. + * + * png_set_swap_alpha(png_structrp png_ptr) + * + * This only has an effect on GA and RGBA pixels. + */ +static void +image_transform_png_set_swap_alpha_set(const image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + png_set_swap_alpha(pp); + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_swap_alpha_mod(const image_transform *this, + image_pixel *that, png_const_structp pp, + const transform_display *display) +{ + if (that->colour_type == PNG_COLOR_TYPE_GA || + that->colour_type == PNG_COLOR_TYPE_RGBA) + that->alpha_first = 1; + + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_swap_alpha_add(image_transform *this, + const image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + UNUSED(bit_depth) + + this->next = *that; + *that = this; + + return colour_type == PNG_COLOR_TYPE_GA || + colour_type == PNG_COLOR_TYPE_RGBA; +} + +IT(swap_alpha); +#undef PT +#define PT ITSTRUCT(swap_alpha) + +#endif /* PNG_READ_SWAP_ALPHA_SUPPORTED */ + +/* png_set_swap */ +#ifdef PNG_READ_SWAP_SUPPORTED +/* Byte swap 16-bit components. + * + * png_set_swap(png_structrp png_ptr) + */ +static void +image_transform_png_set_swap_set(const image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + png_set_swap(pp); + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_swap_mod(const image_transform *this, + image_pixel *that, png_const_structp pp, + const transform_display *display) +{ + if (that->bit_depth == 16) + that->swap16 = 1; + + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_swap_add(image_transform *this, + const image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + UNUSED(colour_type) + + this->next = *that; + *that = this; + + return bit_depth == 16; +} + +IT(swap); +#undef PT +#define PT ITSTRUCT(swap) + +#endif /* PNG_READ_SWAP_SUPPORTED */ + +#ifdef PNG_READ_FILLER_SUPPORTED +/* Add a filler byte to 8-bit Gray or 24-bit RGB images. + * + * png_set_filler, (png_structp png_ptr, png_uint_32 filler, int flags)); + * + * Flags: + * + * PNG_FILLER_BEFORE + * PNG_FILLER_AFTER + */ +#define data ITDATA(filler) +static struct +{ + png_uint_32 filler; + int flags; +} data; + +static void +image_transform_png_set_filler_set(const image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + /* Need a random choice for 'before' and 'after' as well as for the + * filler. The 'filler' value has all 32 bits set, but only bit_depth + * will be used. At this point we don't know bit_depth. + */ + R32(data.filler); + data.flags = random_choice(); + + png_set_filler(pp, data.filler, data.flags); + + /* The standard display handling stuff also needs to know that + * there is a filler, so set that here. + */ + that->this.filler = 1; + + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_filler_mod(const image_transform *this, + image_pixel *that, png_const_structp pp, + const transform_display *display) +{ + if (that->bit_depth >= 8 && + (that->colour_type == PNG_COLOR_TYPE_RGB || + that->colour_type == PNG_COLOR_TYPE_GRAY)) + { + const unsigned int max = (1U << that->bit_depth)-1; + that->alpha = data.filler & max; + that->alphaf = ((double)that->alpha) / max; + that->alphae = 0; + + /* The filler has been stored in the alpha channel, we must record + * that this has been done for the checking later on, the color + * type is faked to have an alpha channel, but libpng won't report + * this; the app has to know the extra channel is there and this + * was recording in standard_display::filler above. + */ + that->colour_type |= 4; /* alpha added */ + that->alpha_first = data.flags == PNG_FILLER_BEFORE; + } + + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_filler_add(image_transform *this, + const image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + this->next = *that; + *that = this; + + return bit_depth >= 8 && (colour_type == PNG_COLOR_TYPE_RGB || + colour_type == PNG_COLOR_TYPE_GRAY); +} + +#undef data +IT(filler); +#undef PT +#define PT ITSTRUCT(filler) + +/* png_set_add_alpha, (png_structp png_ptr, png_uint_32 filler, int flags)); */ +/* Add an alpha byte to 8-bit Gray or 24-bit RGB images. */ +#define data ITDATA(add_alpha) +static struct +{ + png_uint_32 filler; + int flags; +} data; + +static void +image_transform_png_set_add_alpha_set(const image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + /* Need a random choice for 'before' and 'after' as well as for the + * filler. The 'filler' value has all 32 bits set, but only bit_depth + * will be used. At this point we don't know bit_depth. + */ + R32(data.filler); + data.flags = random_choice(); + + png_set_add_alpha(pp, data.filler, data.flags); + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_add_alpha_mod(const image_transform *this, + image_pixel *that, png_const_structp pp, + const transform_display *display) +{ + if (that->bit_depth >= 8 && + (that->colour_type == PNG_COLOR_TYPE_RGB || + that->colour_type == PNG_COLOR_TYPE_GRAY)) + { + const unsigned int max = (1U << that->bit_depth)-1; + that->alpha = data.filler & max; + that->alphaf = ((double)that->alpha) / max; + that->alphae = 0; + + that->colour_type |= 4; /* alpha added */ + that->alpha_first = data.flags == PNG_FILLER_BEFORE; + } + + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_add_alpha_add(image_transform *this, + const image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + this->next = *that; + *that = this; + + return bit_depth >= 8 && (colour_type == PNG_COLOR_TYPE_RGB || + colour_type == PNG_COLOR_TYPE_GRAY); +} + +#undef data +IT(add_alpha); +#undef PT +#define PT ITSTRUCT(add_alpha) + +#endif /* PNG_READ_FILLER_SUPPORTED */ + +/* png_set_packing */ +#ifdef PNG_READ_PACK_SUPPORTED +/* Use 1 byte per pixel in 1, 2, or 4-bit depth files. + * + * png_set_packing(png_structrp png_ptr) + * + * This should only affect grayscale and palette images with less than 8 bits + * per pixel. + */ +static void +image_transform_png_set_packing_set(const image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + png_set_packing(pp); + that->unpacked = 1; + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_packing_mod(const image_transform *this, + image_pixel *that, png_const_structp pp, + const transform_display *display) +{ + /* The general expand case depends on what the colour type is, + * low bit-depth pixel values are unpacked into bytes without + * scaling, so sample_depth is not changed. + */ + if (that->bit_depth < 8) /* grayscale or palette */ + that->bit_depth = 8; + + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_packing_add(image_transform *this, + const image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + UNUSED(colour_type) + + this->next = *that; + *that = this; + + /* Nothing should happen unless the bit depth is less than 8: */ + return bit_depth < 8; +} + +IT(packing); +#undef PT +#define PT ITSTRUCT(packing) + +#endif /* PNG_READ_PACK_SUPPORTED */ + +/* png_set_packswap */ +#ifdef PNG_READ_PACKSWAP_SUPPORTED +/* Swap pixels packed into bytes; reverses the order on screen so that + * the high order bits correspond to the rightmost pixels. + * + * png_set_packswap(png_structrp png_ptr) + */ +static void +image_transform_png_set_packswap_set(const image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + png_set_packswap(pp); + that->this.littleendian = 1; + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_packswap_mod(const image_transform *this, + image_pixel *that, png_const_structp pp, + const transform_display *display) +{ + if (that->bit_depth < 8) + that->littleendian = 1; + + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_packswap_add(image_transform *this, + const image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + UNUSED(colour_type) + + this->next = *that; + *that = this; + + return bit_depth < 8; +} + +IT(packswap); +#undef PT +#define PT ITSTRUCT(packswap) + +#endif /* PNG_READ_PACKSWAP_SUPPORTED */ + + +/* png_set_invert_mono */ +#ifdef PNG_READ_INVERT_MONO_SUPPORTED +/* Invert the gray channel + * + * png_set_invert_mono(png_structrp png_ptr) + */ +static void +image_transform_png_set_invert_mono_set(const image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + png_set_invert_mono(pp); + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_invert_mono_mod(const image_transform *this, + image_pixel *that, png_const_structp pp, + const transform_display *display) +{ + if (that->colour_type & 4) + that->mono_inverted = 1; + + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_invert_mono_add(image_transform *this, + const image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + UNUSED(bit_depth) + + this->next = *that; + *that = this; + + /* Only has an effect on pixels with no colour: */ + return (colour_type & 2) == 0; +} + +IT(invert_mono); +#undef PT +#define PT ITSTRUCT(invert_mono) + +#endif /* PNG_READ_INVERT_MONO_SUPPORTED */ + +#ifdef PNG_READ_SHIFT_SUPPORTED +/* png_set_shift(png_structp, png_const_color_8p true_bits) + * + * The output pixels will be shifted by the given true_bits + * values. + */ +#define data ITDATA(shift) +static png_color_8 data; + +static void +image_transform_png_set_shift_set(const image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + /* Get a random set of shifts. The shifts need to do something + * to test the transform, so they are limited to the bit depth + * of the input image. Notice that in the following the 'gray' + * field is randomized independently. This acts as a check that + * libpng does use the correct field. + */ + const unsigned int depth = that->this.bit_depth; + + data.red = (png_byte)/*SAFE*/(random_mod(depth)+1); + data.green = (png_byte)/*SAFE*/(random_mod(depth)+1); + data.blue = (png_byte)/*SAFE*/(random_mod(depth)+1); + data.gray = (png_byte)/*SAFE*/(random_mod(depth)+1); + data.alpha = (png_byte)/*SAFE*/(random_mod(depth)+1); + + png_set_shift(pp, &data); + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_shift_mod(const image_transform *this, + image_pixel *that, png_const_structp pp, + const transform_display *display) +{ + /* Copy the correct values into the sBIT fields, libpng does not do + * anything to palette data: + */ + if (that->colour_type != PNG_COLOR_TYPE_PALETTE) + { + that->sig_bits = 1; + + /* The sBIT fields are reset to the values previously sent to + * png_set_shift according to the colour type. + * does. + */ + if (that->colour_type & 2) /* RGB channels */ + { + that->red_sBIT = data.red; + that->green_sBIT = data.green; + that->blue_sBIT = data.blue; + } + + else /* One grey channel */ + that->red_sBIT = that->green_sBIT = that->blue_sBIT = data.gray; + + that->alpha_sBIT = data.alpha; + } + + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_shift_add(image_transform *this, + const image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + UNUSED(bit_depth) + + this->next = *that; + *that = this; + + return colour_type != PNG_COLOR_TYPE_PALETTE; +} + +IT(shift); +#undef PT +#define PT ITSTRUCT(shift) + +#endif /* PNG_READ_SHIFT_SUPPORTED */ + +#ifdef THIS_IS_THE_PROFORMA +static void +image_transform_png_set_@_set(const image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + png_set_@(pp); + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_@_mod(const image_transform *this, + image_pixel *that, png_const_structp pp, + const transform_display *display) +{ + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_@_add(image_transform *this, + const image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + this->next = *that; + *that = this; + + return 1; +} + +IT(@); +#endif + + +/* This may just be 'end' if all the transforms are disabled! */ +static image_transform *const image_transform_first = &PT; + +static void +transform_enable(const char *name) +{ + /* Everything starts out enabled, so if we see an 'enable' disabled + * everything else the first time round. + */ + static int all_disabled = 0; + int found_it = 0; + image_transform *list = image_transform_first; + + while (list != &image_transform_end) + { + if (strcmp(list->name, name) == 0) + { + list->enable = 1; + found_it = 1; + } + else if (!all_disabled) + list->enable = 0; + + list = list->list; + } + + all_disabled = 1; + + if (!found_it) + { + fprintf(stderr, "pngvalid: --transform-enable=%s: unknown transform\n", + name); + exit(99); + } +} + +static void +transform_disable(const char *name) +{ + image_transform *list = image_transform_first; + + while (list != &image_transform_end) + { + if (strcmp(list->name, name) == 0) + { + list->enable = 0; + return; + } + + list = list->list; + } + + fprintf(stderr, "pngvalid: --transform-disable=%s: unknown transform\n", + name); + exit(99); +} + +static void +image_transform_reset_count(void) +{ + image_transform *next = image_transform_first; + int count = 0; + + while (next != &image_transform_end) + { + next->local_use = 0; + next->next = 0; + next = next->list; + ++count; + } + + /* This can only happen if we every have more than 32 transforms (excluding + * the end) in the list. + */ + if (count > 32) abort(); +} + +static int +image_transform_test_counter(png_uint_32 counter, unsigned int max) +{ + /* Test the list to see if there is any point contining, given a current + * counter and a 'max' value. + */ + image_transform *next = image_transform_first; + + while (next != &image_transform_end) + { + /* For max 0 or 1 continue until the counter overflows: */ + counter >>= 1; + + /* Continue if any entry hasn't reacked the max. */ + if (max > 1 && next->local_use < max) + return 1; + next = next->list; + } + + return max <= 1 && counter == 0; +} + +static png_uint_32 +image_transform_add(const image_transform **this, unsigned int max, + png_uint_32 counter, char *name, size_t sizeof_name, size_t *pos, + png_byte colour_type, png_byte bit_depth) +{ + for (;;) /* until we manage to add something */ + { + png_uint_32 mask; + image_transform *list; + + /* Find the next counter value, if the counter is zero this is the start + * of the list. This routine always returns the current counter (not the + * next) so it returns 0 at the end and expects 0 at the beginning. + */ + if (counter == 0) /* first time */ + { + image_transform_reset_count(); + if (max <= 1) + counter = 1; + else + counter = random_32(); + } + else /* advance the counter */ + { + switch (max) + { + case 0: ++counter; break; + case 1: counter <<= 1; break; + default: counter = random_32(); break; + } + } + + /* Now add all these items, if possible */ + *this = &image_transform_end; + list = image_transform_first; + mask = 1; + + /* Go through the whole list adding anything that the counter selects: */ + while (list != &image_transform_end) + { + if ((counter & mask) != 0 && list->enable && + (max == 0 || list->local_use < max)) + { + /* Candidate to add: */ + if (list->add(list, this, colour_type, bit_depth) || max == 0) + { + /* Added, so add to the name too. */ + *pos = safecat(name, sizeof_name, *pos, " +"); + *pos = safecat(name, sizeof_name, *pos, list->name); + } + + else + { + /* Not useful and max>0, so remove it from *this: */ + *this = list->next; + list->next = 0; + + /* And, since we know it isn't useful, stop it being added again + * in this run: + */ + list->local_use = max; + } + } + + mask <<= 1; + list = list->list; + } + + /* Now if anything was added we have something to do. */ + if (*this != &image_transform_end) + return counter; + + /* Nothing added, but was there anything in there to add? */ + if (!image_transform_test_counter(counter, max)) + return 0; + } +} + +static void +perform_transform_test(png_modifier *pm) +{ + png_byte colour_type = 0; + png_byte bit_depth = 0; + unsigned int palette_number = 0; + + while (next_format(&colour_type, &bit_depth, &palette_number, pm->test_lbg, + pm->test_tRNS)) + { + png_uint_32 counter = 0; + size_t base_pos; + char name[64]; + + base_pos = safecat(name, sizeof name, 0, "transform:"); + + for (;;) + { + size_t pos = base_pos; + const image_transform *list = 0; + + /* 'max' is currently hardwired to '1'; this should be settable on the + * command line. + */ + counter = image_transform_add(&list, 1/*max*/, counter, + name, sizeof name, &pos, colour_type, bit_depth); + + if (counter == 0) + break; + + /* The command line can change this to checking interlaced images. */ + do + { + pm->repeat = 0; + transform_test(pm, FILEID(colour_type, bit_depth, palette_number, + pm->interlace_type, 0, 0, 0), list, name); + + if (fail(pm)) + return; + } + while (pm->repeat); + } + } +} +#endif /* PNG_READ_TRANSFORMS_SUPPORTED */ + +/********************************* GAMMA TESTS ********************************/ +#ifdef PNG_READ_GAMMA_SUPPORTED +/* Reader callbacks and implementations, where they differ from the standard + * ones. + */ +typedef struct gamma_display +{ + standard_display this; + + /* Parameters */ + png_modifier* pm; + double file_gamma; + double screen_gamma; + double background_gamma; + png_byte sbit; + int threshold_test; + int use_input_precision; + int scale16; + int expand16; + int do_background; + png_color_16 background_color; + + /* Local variables */ + double maxerrout; + double maxerrpc; + double maxerrabs; +} gamma_display; + +#define ALPHA_MODE_OFFSET 4 + +static void +gamma_display_init(gamma_display *dp, png_modifier *pm, png_uint_32 id, + double file_gamma, double screen_gamma, png_byte sbit, int threshold_test, + int use_input_precision, int scale16, int expand16, + int do_background, const png_color_16 *pointer_to_the_background_color, + double background_gamma) +{ + /* Standard fields */ + standard_display_init(&dp->this, &pm->this, id, do_read_interlace, + pm->use_update_info); + + /* Parameter fields */ + dp->pm = pm; + dp->file_gamma = file_gamma; + dp->screen_gamma = screen_gamma; + dp->background_gamma = background_gamma; + dp->sbit = sbit; + dp->threshold_test = threshold_test; + dp->use_input_precision = use_input_precision; + dp->scale16 = scale16; + dp->expand16 = expand16; + dp->do_background = do_background; + if (do_background && pointer_to_the_background_color != 0) + dp->background_color = *pointer_to_the_background_color; + else + memset(&dp->background_color, 0, sizeof dp->background_color); + + /* Local variable fields */ + dp->maxerrout = dp->maxerrpc = dp->maxerrabs = 0; +} + +static void +gamma_info_imp(gamma_display *dp, png_structp pp, png_infop pi) +{ + /* Reuse the standard stuff as appropriate. */ + standard_info_part1(&dp->this, pp, pi); + + /* If requested strip 16 to 8 bits - this is handled automagically below + * because the output bit depth is read from the library. Note that there + * are interactions with sBIT but, internally, libpng makes sbit at most + * PNG_MAX_GAMMA_8 prior to 1.7 when doing the following. + */ + if (dp->scale16) +# ifdef PNG_READ_SCALE_16_TO_8_SUPPORTED + png_set_scale_16(pp); +# else + /* The following works both in 1.5.4 and earlier versions: */ +# ifdef PNG_READ_16_TO_8_SUPPORTED + png_set_strip_16(pp); +# else + png_error(pp, "scale16 (16 to 8 bit conversion) not supported"); +# endif +# endif + + if (dp->expand16) +# ifdef PNG_READ_EXPAND_16_SUPPORTED + png_set_expand_16(pp); +# else + png_error(pp, "expand16 (8 to 16 bit conversion) not supported"); +# endif + + if (dp->do_background >= ALPHA_MODE_OFFSET) + { +# ifdef PNG_READ_ALPHA_MODE_SUPPORTED + { + /* This tests the alpha mode handling, if supported. */ + int mode = dp->do_background - ALPHA_MODE_OFFSET; + + /* The gamma value is the output gamma, and is in the standard, + * non-inverted, represenation. It provides a default for the PNG file + * gamma, but since the file has a gAMA chunk this does not matter. + */ + const double sg = dp->screen_gamma; +# ifndef PNG_FLOATING_POINT_SUPPORTED + const png_fixed_point g = fix(sg); +# endif + +# ifdef PNG_FLOATING_POINT_SUPPORTED + png_set_alpha_mode(pp, mode, sg); +# else + png_set_alpha_mode_fixed(pp, mode, g); +# endif + + /* However, for the standard Porter-Duff algorithm the output defaults + * to be linear, so if the test requires non-linear output it must be + * corrected here. + */ + if (mode == PNG_ALPHA_STANDARD && sg != 1) + { +# ifdef PNG_FLOATING_POINT_SUPPORTED + png_set_gamma(pp, sg, dp->file_gamma); +# else + png_fixed_point f = fix(dp->file_gamma); + png_set_gamma_fixed(pp, g, f); +# endif + } + } +# else + png_error(pp, "alpha mode handling not supported"); +# endif + } + + else + { + /* Set up gamma processing. */ +# ifdef PNG_FLOATING_POINT_SUPPORTED + png_set_gamma(pp, dp->screen_gamma, dp->file_gamma); +# else + { + png_fixed_point s = fix(dp->screen_gamma); + png_fixed_point f = fix(dp->file_gamma); + png_set_gamma_fixed(pp, s, f); + } +# endif + + if (dp->do_background) + { +# ifdef PNG_READ_BACKGROUND_SUPPORTED + /* NOTE: this assumes the caller provided the correct background gamma! + */ + const double bg = dp->background_gamma; +# ifndef PNG_FLOATING_POINT_SUPPORTED + const png_fixed_point g = fix(bg); +# endif + +# ifdef PNG_FLOATING_POINT_SUPPORTED + png_set_background(pp, &dp->background_color, dp->do_background, + 0/*need_expand*/, bg); +# else + png_set_background_fixed(pp, &dp->background_color, + dp->do_background, 0/*need_expand*/, g); +# endif +# else + png_error(pp, "png_set_background not supported"); +# endif + } + } + + { + int i = dp->this.use_update_info; + /* Always do one call, even if use_update_info is 0. */ + do + png_read_update_info(pp, pi); + while (--i > 0); + } + + /* Now we may get a different cbRow: */ + standard_info_part2(&dp->this, pp, pi, 1 /*images*/); +} + +static void PNGCBAPI +gamma_info(png_structp pp, png_infop pi) +{ + gamma_info_imp(voidcast(gamma_display*, png_get_progressive_ptr(pp)), pp, + pi); +} + +/* Validate a single component value - the routine gets the input and output + * sample values as unscaled PNG component values along with a cache of all the + * information required to validate the values. + */ +typedef struct validate_info +{ + png_const_structp pp; + gamma_display *dp; + png_byte sbit; + int use_input_precision; + int do_background; + int scale16; + unsigned int sbit_max; + unsigned int isbit_shift; + unsigned int outmax; + + double gamma_correction; /* Overall correction required. */ + double file_inverse; /* Inverse of file gamma. */ + double screen_gamma; + double screen_inverse; /* Inverse of screen gamma. */ + + double background_red; /* Linear background value, red or gray. */ + double background_green; + double background_blue; + + double maxabs; + double maxpc; + double maxcalc; + double maxout; + double maxout_total; /* Total including quantization error */ + double outlog; + int outquant; +} +validate_info; + +static void +init_validate_info(validate_info *vi, gamma_display *dp, png_const_structp pp, + int in_depth, int out_depth) +{ + const unsigned int outmax = (1U<pp = pp; + vi->dp = dp; + + if (dp->sbit > 0 && dp->sbit < in_depth) + { + vi->sbit = dp->sbit; + vi->isbit_shift = in_depth - dp->sbit; + } + + else + { + vi->sbit = (png_byte)in_depth; + vi->isbit_shift = 0; + } + + vi->sbit_max = (1U << vi->sbit)-1; + + /* This mimics the libpng threshold test, '0' is used to prevent gamma + * correction in the validation test. + */ + vi->screen_gamma = dp->screen_gamma; + if (fabs(vi->screen_gamma-1) < PNG_GAMMA_THRESHOLD) + vi->screen_gamma = vi->screen_inverse = 0; + else + vi->screen_inverse = 1/vi->screen_gamma; + + vi->use_input_precision = dp->use_input_precision; + vi->outmax = outmax; + vi->maxabs = abserr(dp->pm, in_depth, out_depth); + vi->maxpc = pcerr(dp->pm, in_depth, out_depth); + vi->maxcalc = calcerr(dp->pm, in_depth, out_depth); + vi->maxout = outerr(dp->pm, in_depth, out_depth); + vi->outquant = output_quantization_factor(dp->pm, in_depth, out_depth); + vi->maxout_total = vi->maxout + vi->outquant * .5; + vi->outlog = outlog(dp->pm, in_depth, out_depth); + + if ((dp->this.colour_type & PNG_COLOR_MASK_ALPHA) != 0 || + (dp->this.colour_type == 3 && dp->this.is_transparent) || + ((dp->this.colour_type == 0 || dp->this.colour_type == 2) && + dp->this.has_tRNS)) + { + vi->do_background = dp->do_background; + + if (vi->do_background != 0) + { + const double bg_inverse = 1/dp->background_gamma; + double r, g, b; + + /* Caller must at least put the gray value into the red channel */ + r = dp->background_color.red; r /= outmax; + g = dp->background_color.green; g /= outmax; + b = dp->background_color.blue; b /= outmax; + +# if 0 + /* libpng doesn't do this optimization, if we do pngvalid will fail. + */ + if (fabs(bg_inverse-1) >= PNG_GAMMA_THRESHOLD) +# endif + { + r = pow(r, bg_inverse); + g = pow(g, bg_inverse); + b = pow(b, bg_inverse); + } + + vi->background_red = r; + vi->background_green = g; + vi->background_blue = b; + } + } + else /* Do not expect any background processing */ + vi->do_background = 0; + + if (vi->do_background == 0) + vi->background_red = vi->background_green = vi->background_blue = 0; + + vi->gamma_correction = 1/(dp->file_gamma*dp->screen_gamma); + if (fabs(vi->gamma_correction-1) < PNG_GAMMA_THRESHOLD) + vi->gamma_correction = 0; + + vi->file_inverse = 1/dp->file_gamma; + if (fabs(vi->file_inverse-1) < PNG_GAMMA_THRESHOLD) + vi->file_inverse = 0; + + vi->scale16 = dp->scale16; +} + +/* This function handles composition of a single non-alpha component. The + * argument is the input sample value, in the range 0..1, and the alpha value. + * The result is the composed, linear, input sample. If alpha is less than zero + * this is the alpha component and the function should not be called! + */ +static double +gamma_component_compose(int do_background, double input_sample, double alpha, + double background, int *compose) +{ + switch (do_background) + { +#ifdef PNG_READ_BACKGROUND_SUPPORTED + case PNG_BACKGROUND_GAMMA_SCREEN: + case PNG_BACKGROUND_GAMMA_FILE: + case PNG_BACKGROUND_GAMMA_UNIQUE: + /* Standard PNG background processing. */ + if (alpha < 1) + { + if (alpha > 0) + { + input_sample = input_sample * alpha + background * (1-alpha); + if (compose != NULL) + *compose = 1; + } + + else + input_sample = background; + } + break; +#endif + +#ifdef PNG_READ_ALPHA_MODE_SUPPORTED + case ALPHA_MODE_OFFSET + PNG_ALPHA_STANDARD: + case ALPHA_MODE_OFFSET + PNG_ALPHA_BROKEN: + /* The components are premultiplied in either case and the output is + * gamma encoded (to get standard Porter-Duff we expect the output + * gamma to be set to 1.0!) + */ + case ALPHA_MODE_OFFSET + PNG_ALPHA_OPTIMIZED: + /* The optimization is that the partial-alpha entries are linear + * while the opaque pixels are gamma encoded, but this only affects the + * output encoding. + */ + if (alpha < 1) + { + if (alpha > 0) + { + input_sample *= alpha; + if (compose != NULL) + *compose = 1; + } + + else + input_sample = 0; + } + break; +#endif + + default: + /* Standard cases where no compositing is done (so the component + * value is already correct.) + */ + UNUSED(alpha) + UNUSED(background) + UNUSED(compose) + break; + } + + return input_sample; +} + +/* This API returns the encoded *input* component, in the range 0..1 */ +static double +gamma_component_validate(const char *name, const validate_info *vi, + const unsigned int id, const unsigned int od, + const double alpha /* <0 for the alpha channel itself */, + const double background /* component background value */) +{ + const unsigned int isbit = id >> vi->isbit_shift; + const unsigned int sbit_max = vi->sbit_max; + const unsigned int outmax = vi->outmax; + const int do_background = vi->do_background; + + double i; + + /* First check on the 'perfect' result obtained from the digitized input + * value, id, and compare this against the actual digitized result, 'od'. + * 'i' is the input result in the range 0..1: + */ + i = isbit; i /= sbit_max; + + /* Check for the fast route: if we don't do any background composition or if + * this is the alpha channel ('alpha' < 0) or if the pixel is opaque then + * just use the gamma_correction field to correct to the final output gamma. + */ + if (alpha == 1 /* opaque pixel component */ || !do_background +#ifdef PNG_READ_ALPHA_MODE_SUPPORTED + || do_background == ALPHA_MODE_OFFSET + PNG_ALPHA_PNG +#endif + || (alpha < 0 /* alpha channel */ +#ifdef PNG_READ_ALPHA_MODE_SUPPORTED + && do_background != ALPHA_MODE_OFFSET + PNG_ALPHA_BROKEN +#endif + )) + { + /* Then get the gamma corrected version of 'i' and compare to 'od', any + * error less than .5 is insignificant - just quantization of the output + * value to the nearest digital value (nevertheless the error is still + * recorded - it's interesting ;-) + */ + double encoded_sample = i; + double encoded_error; + + /* alpha less than 0 indicates the alpha channel, which is always linear + */ + if (alpha >= 0 && vi->gamma_correction > 0) + encoded_sample = pow(encoded_sample, vi->gamma_correction); + encoded_sample *= outmax; + + encoded_error = fabs(od-encoded_sample); + + if (encoded_error > vi->dp->maxerrout) + vi->dp->maxerrout = encoded_error; + + if (encoded_error < vi->maxout_total && encoded_error < vi->outlog) + return i; + } + + /* The slow route - attempt to do linear calculations. */ + /* There may be an error, or background processing is required, so calculate + * the actual sample values - unencoded light intensity values. Note that in + * practice these are not completely unencoded because they include a + * 'viewing correction' to decrease or (normally) increase the perceptual + * contrast of the image. There's nothing we can do about this - we don't + * know what it is - so assume the unencoded value is perceptually linear. + */ + { + double input_sample = i; /* In range 0..1 */ + double output, error, encoded_sample, encoded_error; + double es_lo, es_hi; + int compose = 0; /* Set to one if composition done */ + int output_is_encoded; /* Set if encoded to screen gamma */ + int log_max_error = 1; /* Check maximum error values */ + png_const_charp pass = 0; /* Reason test passes (or 0 for fail) */ + + /* Convert to linear light (with the above caveat.) The alpha channel is + * already linear. + */ + if (alpha >= 0) + { + int tcompose; + + if (vi->file_inverse > 0) + input_sample = pow(input_sample, vi->file_inverse); + + /* Handle the compose processing: */ + tcompose = 0; + input_sample = gamma_component_compose(do_background, input_sample, + alpha, background, &tcompose); + + if (tcompose) + compose = 1; + } + + /* And similarly for the output value, but we need to check the background + * handling to linearize it correctly. + */ + output = od; + output /= outmax; + + output_is_encoded = vi->screen_gamma > 0; + + if (alpha < 0) /* The alpha channel */ + { +#ifdef PNG_READ_ALPHA_MODE_SUPPORTED + if (do_background != ALPHA_MODE_OFFSET + PNG_ALPHA_BROKEN) +#endif + { + /* In all other cases the output alpha channel is linear already, + * don't log errors here, they are much larger in linear data. + */ + output_is_encoded = 0; + log_max_error = 0; + } + } + +#ifdef PNG_READ_ALPHA_MODE_SUPPORTED + else /* A component */ + { + if (do_background == ALPHA_MODE_OFFSET + PNG_ALPHA_OPTIMIZED && + alpha < 1) /* the optimized case - linear output */ + { + if (alpha > 0) log_max_error = 0; + output_is_encoded = 0; + } + } +#endif + + if (output_is_encoded) + output = pow(output, vi->screen_gamma); + + /* Calculate (or recalculate) the encoded_sample value and repeat the + * check above (unnecessary if we took the fast route, but harmless.) + */ + encoded_sample = input_sample; + if (output_is_encoded) + encoded_sample = pow(encoded_sample, vi->screen_inverse); + encoded_sample *= outmax; + + encoded_error = fabs(od-encoded_sample); + + /* Don't log errors in the alpha channel, or the 'optimized' case, + * neither are significant to the overall perception. + */ + if (log_max_error && encoded_error > vi->dp->maxerrout) + vi->dp->maxerrout = encoded_error; + + if (encoded_error < vi->maxout_total) + { + if (encoded_error < vi->outlog) + return i; + + /* Test passed but error is bigger than the log limit, record why the + * test passed: + */ + pass = "less than maxout:\n"; + } + + /* i: the original input value in the range 0..1 + * + * pngvalid calculations: + * input_sample: linear result; i linearized and composed, range 0..1 + * encoded_sample: encoded result; input_sample scaled to ouput bit depth + * + * libpng calculations: + * output: linear result; od scaled to 0..1 and linearized + * od: encoded result from libpng + */ + + /* Now we have the numbers for real errors, both absolute values as as a + * percentage of the correct value (output): + */ + error = fabs(input_sample-output); + + if (log_max_error && error > vi->dp->maxerrabs) + vi->dp->maxerrabs = error; + + /* The following is an attempt to ignore the tendency of quantization to + * dominate the percentage errors for lower result values: + */ + if (log_max_error && input_sample > .5) + { + double percentage_error = error/input_sample; + if (percentage_error > vi->dp->maxerrpc) + vi->dp->maxerrpc = percentage_error; + } + + /* Now calculate the digitization limits for 'encoded_sample' using the + * 'max' values. Note that maxout is in the encoded space but maxpc and + * maxabs are in linear light space. + * + * First find the maximum error in linear light space, range 0..1: + */ + { + double tmp = input_sample * vi->maxpc; + if (tmp < vi->maxabs) tmp = vi->maxabs; + /* If 'compose' is true the composition was done in linear space using + * integer arithmetic. This introduces an extra error of +/- 0.5 (at + * least) in the integer space used. 'maxcalc' records this, taking + * into account the possibility that even for 16 bit output 8 bit space + * may have been used. + */ + if (compose && tmp < vi->maxcalc) tmp = vi->maxcalc; + + /* The 'maxout' value refers to the encoded result, to compare with + * this encode input_sample adjusted by the maximum error (tmp) above. + */ + es_lo = encoded_sample - vi->maxout; + + if (es_lo > 0 && input_sample-tmp > 0) + { + double low_value = input_sample-tmp; + if (output_is_encoded) + low_value = pow(low_value, vi->screen_inverse); + low_value *= outmax; + if (low_value < es_lo) es_lo = low_value; + + /* Quantize this appropriately: */ + es_lo = ceil(es_lo / vi->outquant - .5) * vi->outquant; + } + + else + es_lo = 0; + + es_hi = encoded_sample + vi->maxout; + + if (es_hi < outmax && input_sample+tmp < 1) + { + double high_value = input_sample+tmp; + if (output_is_encoded) + high_value = pow(high_value, vi->screen_inverse); + high_value *= outmax; + if (high_value > es_hi) es_hi = high_value; + + es_hi = floor(es_hi / vi->outquant + .5) * vi->outquant; + } + + else + es_hi = outmax; + } + + /* The primary test is that the final encoded value returned by the + * library should be between the two limits (inclusive) that were + * calculated above. + */ + if (od >= es_lo && od <= es_hi) + { + /* The value passes, but we may need to log the information anyway. */ + if (encoded_error < vi->outlog) + return i; + + if (pass == 0) + pass = "within digitization limits:\n"; + } + + { + /* There has been an error in processing, or we need to log this + * value. + */ + double is_lo, is_hi; + + /* pass is set at this point if either of the tests above would have + * passed. Don't do these additional tests here - just log the + * original [es_lo..es_hi] values. + */ + if (pass == 0 && vi->use_input_precision && vi->dp->sbit) + { + /* Ok, something is wrong - this actually happens in current libpng + * 16-to-8 processing. Assume that the input value (id, adjusted + * for sbit) can be anywhere between value-.5 and value+.5 - quite a + * large range if sbit is low. + * + * NOTE: at present because the libpng gamma table stuff has been + * changed to use a rounding algorithm to correct errors in 8-bit + * calculations the precise sbit calculation (a shift) has been + * lost. This can result in up to a +/-1 error in the presence of + * an sbit less than the bit depth. + */ +# if PNG_LIBPNG_VER < 10700 +# define SBIT_ERROR .5 +# else +# define SBIT_ERROR 1. +# endif + double tmp = (isbit - SBIT_ERROR)/sbit_max; + + if (tmp <= 0) + tmp = 0; + + else if (alpha >= 0 && vi->file_inverse > 0 && tmp < 1) + tmp = pow(tmp, vi->file_inverse); + + tmp = gamma_component_compose(do_background, tmp, alpha, background, + NULL); + + if (output_is_encoded && tmp > 0 && tmp < 1) + tmp = pow(tmp, vi->screen_inverse); + + is_lo = ceil(outmax * tmp - vi->maxout_total); + + if (is_lo < 0) + is_lo = 0; + + tmp = (isbit + SBIT_ERROR)/sbit_max; + + if (tmp >= 1) + tmp = 1; + + else if (alpha >= 0 && vi->file_inverse > 0 && tmp < 1) + tmp = pow(tmp, vi->file_inverse); + + tmp = gamma_component_compose(do_background, tmp, alpha, background, + NULL); + + if (output_is_encoded && tmp > 0 && tmp < 1) + tmp = pow(tmp, vi->screen_inverse); + + is_hi = floor(outmax * tmp + vi->maxout_total); + + if (is_hi > outmax) + is_hi = outmax; + + if (!(od < is_lo || od > is_hi)) + { + if (encoded_error < vi->outlog) + return i; + + pass = "within input precision limits:\n"; + } + + /* One last chance. If this is an alpha channel and the 16to8 + * option has been used and 'inaccurate' scaling is used then the + * bit reduction is obtained by simply using the top 8 bits of the + * value. + * + * This is only done for older libpng versions when the 'inaccurate' + * (chop) method of scaling was used. + */ +# ifndef PNG_READ_16_TO_8_ACCURATE_SCALE_SUPPORTED +# if PNG_LIBPNG_VER < 10504 + /* This may be required for other components in the future, + * but at present the presence of gamma correction effectively + * prevents the errors in the component scaling (I don't quite + * understand why, but since it's better this way I care not + * to ask, JB 20110419.) + */ + if (pass == 0 && alpha < 0 && vi->scale16 && vi->sbit > 8 && + vi->sbit + vi->isbit_shift == 16) + { + tmp = ((id >> 8) - .5)/255; + + if (tmp > 0) + { + is_lo = ceil(outmax * tmp - vi->maxout_total); + if (is_lo < 0) is_lo = 0; + } + + else + is_lo = 0; + + tmp = ((id >> 8) + .5)/255; + + if (tmp < 1) + { + is_hi = floor(outmax * tmp + vi->maxout_total); + if (is_hi > outmax) is_hi = outmax; + } + + else + is_hi = outmax; + + if (!(od < is_lo || od > is_hi)) + { + if (encoded_error < vi->outlog) + return i; + + pass = "within 8 bit limits:\n"; + } + } +# endif +# endif + } + else /* !use_input_precision */ + is_lo = es_lo, is_hi = es_hi; + + /* Attempt to output a meaningful error/warning message: the message + * output depends on the background/composite operation being performed + * because this changes what parameters were actually used above. + */ + { + size_t pos = 0; + /* Need either 1/255 or 1/65535 precision here; 3 or 6 decimal + * places. Just use outmax to work out which. + */ + int precision = (outmax >= 1000 ? 6 : 3); + int use_input=1, use_background=0, do_compose=0; + char msg[256]; + + if (pass != 0) + pos = safecat(msg, sizeof msg, pos, "\n\t"); + + /* Set up the various flags, the output_is_encoded flag above + * is also used below. do_compose is just a double check. + */ + switch (do_background) + { +# ifdef PNG_READ_BACKGROUND_SUPPORTED + case PNG_BACKGROUND_GAMMA_SCREEN: + case PNG_BACKGROUND_GAMMA_FILE: + case PNG_BACKGROUND_GAMMA_UNIQUE: + use_background = (alpha >= 0 && alpha < 1); + /*FALL THROUGH*/ +# endif +# ifdef PNG_READ_ALPHA_MODE_SUPPORTED + case ALPHA_MODE_OFFSET + PNG_ALPHA_STANDARD: + case ALPHA_MODE_OFFSET + PNG_ALPHA_BROKEN: + case ALPHA_MODE_OFFSET + PNG_ALPHA_OPTIMIZED: +# endif /* ALPHA_MODE_SUPPORTED */ + do_compose = (alpha > 0 && alpha < 1); + use_input = (alpha != 0); + break; + + default: + break; + } + + /* Check the 'compose' flag */ + if (compose != do_compose) + png_error(vi->pp, "internal error (compose)"); + + /* 'name' is the component name */ + pos = safecat(msg, sizeof msg, pos, name); + pos = safecat(msg, sizeof msg, pos, "("); + pos = safecatn(msg, sizeof msg, pos, id); + if (use_input || pass != 0/*logging*/) + { + if (isbit != id) + { + /* sBIT has reduced the precision of the input: */ + pos = safecat(msg, sizeof msg, pos, ", sbit("); + pos = safecatn(msg, sizeof msg, pos, vi->sbit); + pos = safecat(msg, sizeof msg, pos, "): "); + pos = safecatn(msg, sizeof msg, pos, isbit); + } + pos = safecat(msg, sizeof msg, pos, "/"); + /* The output is either "id/max" or "id sbit(sbit): isbit/max" */ + pos = safecatn(msg, sizeof msg, pos, vi->sbit_max); + } + pos = safecat(msg, sizeof msg, pos, ")"); + + /* A component may have been multiplied (in linear space) by the + * alpha value, 'compose' says whether this is relevant. + */ + if (compose || pass != 0) + { + /* If any form of composition is being done report our + * calculated linear value here (the code above doesn't record + * the input value before composition is performed, so what + * gets reported is the value after composition.) + */ + if (use_input || pass != 0) + { + if (vi->file_inverse > 0) + { + pos = safecat(msg, sizeof msg, pos, "^"); + pos = safecatd(msg, sizeof msg, pos, vi->file_inverse, 2); + } + + else + pos = safecat(msg, sizeof msg, pos, "[linear]"); + + pos = safecat(msg, sizeof msg, pos, "*(alpha)"); + pos = safecatd(msg, sizeof msg, pos, alpha, precision); + } + + /* Now record the *linear* background value if it was used + * (this function is not passed the original, non-linear, + * value but it is contained in the test name.) + */ + if (use_background) + { + pos = safecat(msg, sizeof msg, pos, use_input ? "+" : " "); + pos = safecat(msg, sizeof msg, pos, "(background)"); + pos = safecatd(msg, sizeof msg, pos, background, precision); + pos = safecat(msg, sizeof msg, pos, "*"); + pos = safecatd(msg, sizeof msg, pos, 1-alpha, precision); + } + } + + /* Report the calculated value (input_sample) and the linearized + * libpng value (output) unless this is just a component gamma + * correction. + */ + if (compose || alpha < 0 || pass != 0) + { + pos = safecat(msg, sizeof msg, pos, + pass != 0 ? " =\n\t" : " = "); + pos = safecatd(msg, sizeof msg, pos, input_sample, precision); + pos = safecat(msg, sizeof msg, pos, " (libpng: "); + pos = safecatd(msg, sizeof msg, pos, output, precision); + pos = safecat(msg, sizeof msg, pos, ")"); + + /* Finally report the output gamma encoding, if any. */ + if (output_is_encoded) + { + pos = safecat(msg, sizeof msg, pos, " ^"); + pos = safecatd(msg, sizeof msg, pos, vi->screen_inverse, 2); + pos = safecat(msg, sizeof msg, pos, "(to screen) ="); + } + + else + pos = safecat(msg, sizeof msg, pos, " [screen is linear] ="); + } + + if ((!compose && alpha >= 0) || pass != 0) + { + if (pass != 0) /* logging */ + pos = safecat(msg, sizeof msg, pos, "\n\t[overall:"); + + /* This is the non-composition case, the internal linear + * values are irrelevant (though the log below will reveal + * them.) Output a much shorter warning/error message and report + * the overall gamma correction. + */ + if (vi->gamma_correction > 0) + { + pos = safecat(msg, sizeof msg, pos, " ^"); + pos = safecatd(msg, sizeof msg, pos, vi->gamma_correction, 2); + pos = safecat(msg, sizeof msg, pos, "(gamma correction) ="); + } + + else + pos = safecat(msg, sizeof msg, pos, + " [no gamma correction] ="); + + if (pass != 0) + pos = safecat(msg, sizeof msg, pos, "]"); + } + + /* This is our calculated encoded_sample which should (but does + * not) match od: + */ + pos = safecat(msg, sizeof msg, pos, pass != 0 ? "\n\t" : " "); + pos = safecatd(msg, sizeof msg, pos, is_lo, 1); + pos = safecat(msg, sizeof msg, pos, " < "); + pos = safecatd(msg, sizeof msg, pos, encoded_sample, 1); + pos = safecat(msg, sizeof msg, pos, " (libpng: "); + pos = safecatn(msg, sizeof msg, pos, od); + pos = safecat(msg, sizeof msg, pos, ")"); + pos = safecat(msg, sizeof msg, pos, "/"); + pos = safecatn(msg, sizeof msg, pos, outmax); + pos = safecat(msg, sizeof msg, pos, " < "); + pos = safecatd(msg, sizeof msg, pos, is_hi, 1); + + if (pass == 0) /* The error condition */ + { +# ifdef PNG_WARNINGS_SUPPORTED + png_warning(vi->pp, msg); +# else + store_warning(vi->pp, msg); +# endif + } + + else /* logging this value */ + store_verbose(&vi->dp->pm->this, vi->pp, pass, msg); + } + } + } + + return i; +} + +static void +gamma_image_validate(gamma_display *dp, png_const_structp pp, + png_infop pi) +{ + /* Get some constants derived from the input and output file formats: */ + const png_store* const ps = dp->this.ps; + const png_byte in_ct = dp->this.colour_type; + const png_byte in_bd = dp->this.bit_depth; + const png_uint_32 w = dp->this.w; + const png_uint_32 h = dp->this.h; + const size_t cbRow = dp->this.cbRow; + const png_byte out_ct = png_get_color_type(pp, pi); + const png_byte out_bd = png_get_bit_depth(pp, pi); + + /* There are three sources of error, firstly the quantization in the + * file encoding, determined by sbit and/or the file depth, secondly + * the output (screen) gamma and thirdly the output file encoding. + * + * Since this API receives the screen and file gamma in double + * precision it is possible to calculate an exact answer given an input + * pixel value. Therefore we assume that the *input* value is exact - + * sample/maxsample - calculate the corresponding gamma corrected + * output to the limits of double precision arithmetic and compare with + * what libpng returns. + * + * Since the library must quantize the output to 8 or 16 bits there is + * a fundamental limit on the accuracy of the output of +/-.5 - this + * quantization limit is included in addition to the other limits + * specified by the paramaters to the API. (Effectively, add .5 + * everywhere.) + * + * The behavior of the 'sbit' paramter is defined by section 12.5 + * (sample depth scaling) of the PNG spec. That section forces the + * decoder to assume that the PNG values have been scaled if sBIT is + * present: + * + * png-sample = floor( input-sample * (max-out/max-in) + .5); + * + * This means that only a subset of the possible PNG values should + * appear in the input. However, the spec allows the encoder to use a + * variety of approximations to the above and doesn't require any + * restriction of the values produced. + * + * Nevertheless the spec requires that the upper 'sBIT' bits of the + * value stored in a PNG file be the original sample bits. + * Consequently the code below simply scales the top sbit bits by + * (1<this.palette; + const int in_is_transparent = dp->this.is_transparent; + int process_tRNS; + int out_npalette = -1; + int out_is_transparent = 0; /* Just refers to the palette case */ + store_palette out_palette; + validate_info vi; + + /* Check for row overwrite errors */ + store_image_check(dp->this.ps, pp, 0); + + /* Supply the input and output sample depths here - 8 for an indexed image, + * otherwise the bit depth. + */ + init_validate_info(&vi, dp, pp, in_ct==3?8:in_bd, out_ct==3?8:out_bd); + + processing = (vi.gamma_correction > 0 && !dp->threshold_test) + || in_bd != out_bd || in_ct != out_ct || vi.do_background; + process_tRNS = dp->this.has_tRNS && vi.do_background; + + /* TODO: FIX THIS: MAJOR BUG! If the transformations all happen inside + * the palette there is no way of finding out, because libpng fails to + * update the palette on png_read_update_info. Indeed, libpng doesn't + * even do the required work until much later, when it doesn't have any + * info pointer. Oops. For the moment 'processing' is turned off if + * out_ct is palette. + */ + if (in_ct == 3 && out_ct == 3) + processing = 0; + + if (processing && out_ct == 3) + out_is_transparent = read_palette(out_palette, &out_npalette, pp, pi); + + for (y=0; ythis.palette[in_index].alpha : + sample(std, in_ct, in_bd, x, samples_per_pixel, 0, 0); + + unsigned int output_alpha = 65536 /* as a flag value */; + + if (out_ct == 3) + { + if (out_is_transparent) + output_alpha = out_palette[out_index].alpha; + } + + else if ((out_ct & PNG_COLOR_MASK_ALPHA) != 0) + output_alpha = sample(pRow, out_ct, out_bd, x, + samples_per_pixel, 0, 0); + + if (output_alpha != 65536) + alpha = gamma_component_validate("alpha", &vi, input_alpha, + output_alpha, -1/*alpha*/, 0/*background*/); + + else /* no alpha in output */ + { + /* This is a copy of the calculation of 'i' above in order to + * have the alpha value to use in the background calculation. + */ + alpha = input_alpha >> vi.isbit_shift; + alpha /= vi.sbit_max; + } + } + + else if (process_tRNS) + { + /* alpha needs to be set appropriately for this pixel, it is + * currently 1 and needs to be 0 for an input pixel which matches + * the values in tRNS. + */ + switch (in_ct) + { + case 0: /* gray */ + if (sample(std, in_ct, in_bd, x, 0, 0, 0) == + dp->this.transparent.red) + alpha = 0; + break; + + case 2: /* RGB */ + if (sample(std, in_ct, in_bd, x, 0, 0, 0) == + dp->this.transparent.red && + sample(std, in_ct, in_bd, x, 1, 0, 0) == + dp->this.transparent.green && + sample(std, in_ct, in_bd, x, 2, 0, 0) == + dp->this.transparent.blue) + alpha = 0; + break; + + default: + break; + } + } + + /* Handle grayscale or RGB components. */ + if ((in_ct & PNG_COLOR_MASK_COLOR) == 0) /* grayscale */ + (void)gamma_component_validate("gray", &vi, + sample(std, in_ct, in_bd, x, 0, 0, 0), + sample(pRow, out_ct, out_bd, x, 0, 0, 0), + alpha/*component*/, vi.background_red); + else /* RGB or palette */ + { + (void)gamma_component_validate("red", &vi, + in_ct == 3 ? in_palette[in_index].red : + sample(std, in_ct, in_bd, x, 0, 0, 0), + out_ct == 3 ? out_palette[out_index].red : + sample(pRow, out_ct, out_bd, x, 0, 0, 0), + alpha/*component*/, vi.background_red); + + (void)gamma_component_validate("green", &vi, + in_ct == 3 ? in_palette[in_index].green : + sample(std, in_ct, in_bd, x, 1, 0, 0), + out_ct == 3 ? out_palette[out_index].green : + sample(pRow, out_ct, out_bd, x, 1, 0, 0), + alpha/*component*/, vi.background_green); + + (void)gamma_component_validate("blue", &vi, + in_ct == 3 ? in_palette[in_index].blue : + sample(std, in_ct, in_bd, x, 2, 0, 0), + out_ct == 3 ? out_palette[out_index].blue : + sample(pRow, out_ct, out_bd, x, 2, 0, 0), + alpha/*component*/, vi.background_blue); + } + } + } + + else if (memcmp(std, pRow, cbRow) != 0) + { + char msg[64]; + + /* No transform is expected on the threshold tests. */ + sprintf(msg, "gamma: below threshold row %lu changed", + (unsigned long)y); + + png_error(pp, msg); + } + } /* row (y) loop */ + + dp->this.ps->validated = 1; +} + +static void PNGCBAPI +gamma_end(png_structp ppIn, png_infop pi) +{ + png_const_structp pp = ppIn; + gamma_display *dp = voidcast(gamma_display*, png_get_progressive_ptr(pp)); + + if (!dp->this.speed) + gamma_image_validate(dp, pp, pi); + else + dp->this.ps->validated = 1; +} + +/* A single test run checking a gamma transformation. + * + * maxabs: maximum absolute error as a fraction + * maxout: maximum output error in the output units + * maxpc: maximum percentage error (as a percentage) + */ +static void +gamma_test(png_modifier *pmIn, const png_byte colour_typeIn, + const png_byte bit_depthIn, const int palette_numberIn, + const int interlace_typeIn, + const double file_gammaIn, const double screen_gammaIn, + const png_byte sbitIn, const int threshold_testIn, + const char *name, + const int use_input_precisionIn, const int scale16In, + const int expand16In, const int do_backgroundIn, + const png_color_16 *bkgd_colorIn, double bkgd_gammaIn) +{ + gamma_display d; + context(&pmIn->this, fault); + + gamma_display_init(&d, pmIn, FILEID(colour_typeIn, bit_depthIn, + palette_numberIn, interlace_typeIn, 0, 0, 0), + file_gammaIn, screen_gammaIn, sbitIn, + threshold_testIn, use_input_precisionIn, scale16In, + expand16In, do_backgroundIn, bkgd_colorIn, bkgd_gammaIn); + + Try + { + png_structp pp; + png_infop pi; + gama_modification gama_mod; + srgb_modification srgb_mod; + sbit_modification sbit_mod; + + /* For the moment don't use the png_modifier support here. */ + d.pm->encoding_counter = 0; + modifier_set_encoding(d.pm); /* Just resets everything */ + d.pm->current_gamma = d.file_gamma; + + /* Make an appropriate modifier to set the PNG file gamma to the + * given gamma value and the sBIT chunk to the given precision. + */ + d.pm->modifications = NULL; + gama_modification_init(&gama_mod, d.pm, d.file_gamma); + srgb_modification_init(&srgb_mod, d.pm, 127 /*delete*/); + if (d.sbit > 0) + sbit_modification_init(&sbit_mod, d.pm, d.sbit); + + modification_reset(d.pm->modifications); + + /* Get a png_struct for reading the image. */ + pp = set_modifier_for_read(d.pm, &pi, d.this.id, name); + standard_palette_init(&d.this); + + /* Introduce the correct read function. */ + if (d.pm->this.progressive) + { + /* Share the row function with the standard implementation. */ + png_set_progressive_read_fn(pp, &d, gamma_info, progressive_row, + gamma_end); + + /* Now feed data into the reader until we reach the end: */ + modifier_progressive_read(d.pm, pp, pi); + } + else + { + /* modifier_read expects a png_modifier* */ + png_set_read_fn(pp, d.pm, modifier_read); + + /* Check the header values: */ + png_read_info(pp, pi); + + /* Process the 'info' requirements. Only one image is generated */ + gamma_info_imp(&d, pp, pi); + + sequential_row(&d.this, pp, pi, -1, 0); + + if (!d.this.speed) + gamma_image_validate(&d, pp, pi); + else + d.this.ps->validated = 1; + } + + modifier_reset(d.pm); + + if (d.pm->log && !d.threshold_test && !d.this.speed) + fprintf(stderr, "%d bit %s %s: max error %f (%.2g, %2g%%)\n", + d.this.bit_depth, colour_types[d.this.colour_type], name, + d.maxerrout, d.maxerrabs, 100*d.maxerrpc); + + /* Log the summary values too. */ + if (d.this.colour_type == 0 || d.this.colour_type == 4) + { + switch (d.this.bit_depth) + { + case 1: + break; + + case 2: + if (d.maxerrout > d.pm->error_gray_2) + d.pm->error_gray_2 = d.maxerrout; + + break; + + case 4: + if (d.maxerrout > d.pm->error_gray_4) + d.pm->error_gray_4 = d.maxerrout; + + break; + + case 8: + if (d.maxerrout > d.pm->error_gray_8) + d.pm->error_gray_8 = d.maxerrout; + + break; + + case 16: + if (d.maxerrout > d.pm->error_gray_16) + d.pm->error_gray_16 = d.maxerrout; + + break; + + default: + png_error(pp, "bad bit depth (internal: 1)"); + } + } + + else if (d.this.colour_type == 2 || d.this.colour_type == 6) + { + switch (d.this.bit_depth) + { + case 8: + + if (d.maxerrout > d.pm->error_color_8) + d.pm->error_color_8 = d.maxerrout; + + break; + + case 16: + + if (d.maxerrout > d.pm->error_color_16) + d.pm->error_color_16 = d.maxerrout; + + break; + + default: + png_error(pp, "bad bit depth (internal: 2)"); + } + } + + else if (d.this.colour_type == 3) + { + if (d.maxerrout > d.pm->error_indexed) + d.pm->error_indexed = d.maxerrout; + } + } + + Catch(fault) + modifier_reset(voidcast(png_modifier*,(void*)fault)); +} + +static void gamma_threshold_test(png_modifier *pm, png_byte colour_type, + png_byte bit_depth, int interlace_type, double file_gamma, + double screen_gamma) +{ + size_t pos = 0; + char name[64]; + pos = safecat(name, sizeof name, pos, "threshold "); + pos = safecatd(name, sizeof name, pos, file_gamma, 3); + pos = safecat(name, sizeof name, pos, "/"); + pos = safecatd(name, sizeof name, pos, screen_gamma, 3); + + (void)gamma_test(pm, colour_type, bit_depth, 0/*palette*/, interlace_type, + file_gamma, screen_gamma, 0/*sBIT*/, 1/*threshold test*/, name, + 0 /*no input precision*/, + 0 /*no scale16*/, 0 /*no expand16*/, 0 /*no background*/, 0 /*hence*/, + 0 /*no background gamma*/); +} + +static void +perform_gamma_threshold_tests(png_modifier *pm) +{ + png_byte colour_type = 0; + png_byte bit_depth = 0; + unsigned int palette_number = 0; + + /* Don't test more than one instance of each palette - it's pointless, in + * fact this test is somewhat excessive since libpng doesn't make this + * decision based on colour type or bit depth! + * + * CHANGED: now test two palettes and, as a side effect, images with and + * without tRNS. + */ + while (next_format(&colour_type, &bit_depth, &palette_number, + pm->test_lbg_gamma_threshold, pm->test_tRNS)) + if (palette_number < 2) + { + double test_gamma = 1.0; + while (test_gamma >= .4) + { + /* There's little point testing the interlacing vs non-interlacing, + * but this can be set from the command line. + */ + gamma_threshold_test(pm, colour_type, bit_depth, pm->interlace_type, + test_gamma, 1/test_gamma); + test_gamma *= .95; + } + + /* And a special test for sRGB */ + gamma_threshold_test(pm, colour_type, bit_depth, pm->interlace_type, + .45455, 2.2); + + if (fail(pm)) + return; + } +} + +static void gamma_transform_test(png_modifier *pm, + const png_byte colour_type, const png_byte bit_depth, + const int palette_number, + const int interlace_type, const double file_gamma, + const double screen_gamma, const png_byte sbit, + const int use_input_precision, const int scale16) +{ + size_t pos = 0; + char name[64]; + + if (sbit != bit_depth && sbit != 0) + { + pos = safecat(name, sizeof name, pos, "sbit("); + pos = safecatn(name, sizeof name, pos, sbit); + pos = safecat(name, sizeof name, pos, ") "); + } + + else + pos = safecat(name, sizeof name, pos, "gamma "); + + if (scale16) + pos = safecat(name, sizeof name, pos, "16to8 "); + + pos = safecatd(name, sizeof name, pos, file_gamma, 3); + pos = safecat(name, sizeof name, pos, "->"); + pos = safecatd(name, sizeof name, pos, screen_gamma, 3); + + gamma_test(pm, colour_type, bit_depth, palette_number, interlace_type, + file_gamma, screen_gamma, sbit, 0, name, use_input_precision, + scale16, pm->test_gamma_expand16, 0 , 0, 0); +} + +static void perform_gamma_transform_tests(png_modifier *pm) +{ + png_byte colour_type = 0; + png_byte bit_depth = 0; + unsigned int palette_number = 0; + + while (next_format(&colour_type, &bit_depth, &palette_number, + pm->test_lbg_gamma_transform, pm->test_tRNS)) + { + unsigned int i, j; + + for (i=0; ingamma_tests; ++i) for (j=0; jngamma_tests; ++j) + if (i != j) + { + gamma_transform_test(pm, colour_type, bit_depth, palette_number, + pm->interlace_type, 1/pm->gammas[i], pm->gammas[j], 0/*sBIT*/, + pm->use_input_precision, 0 /*do not scale16*/); + + if (fail(pm)) + return; + } + } +} + +static void perform_gamma_sbit_tests(png_modifier *pm) +{ + png_byte sbit; + + /* The only interesting cases are colour and grayscale, alpha is ignored here + * for overall speed. Only bit depths where sbit is less than the bit depth + * are tested. + */ + for (sbit=pm->sbitlow; sbit<(1<test_lbg_gamma_sbit, pm->test_tRNS)) + if ((colour_type & PNG_COLOR_MASK_ALPHA) == 0 && + ((colour_type == 3 && sbit < 8) || + (colour_type != 3 && sbit < bit_depth))) + { + unsigned int i; + + for (i=0; ingamma_tests; ++i) + { + unsigned int j; + + for (j=0; jngamma_tests; ++j) if (i != j) + { + gamma_transform_test(pm, colour_type, bit_depth, npalette, + pm->interlace_type, 1/pm->gammas[i], pm->gammas[j], + sbit, pm->use_input_precision_sbit, 0 /*scale16*/); + + if (fail(pm)) + return; + } + } + } + } +} + +/* Note that this requires a 16 bit source image but produces 8 bit output, so + * we only need the 16bit write support, but the 16 bit images are only + * generated if DO_16BIT is defined. + */ +#ifdef DO_16BIT +static void perform_gamma_scale16_tests(png_modifier *pm) +{ +# ifndef PNG_MAX_GAMMA_8 +# define PNG_MAX_GAMMA_8 11 +# endif +# if defined PNG_MAX_GAMMA_8 || PNG_LIBPNG_VER < 10700 +# define SBIT_16_TO_8 PNG_MAX_GAMMA_8 +# else +# define SBIT_16_TO_8 16 +# endif + /* Include the alpha cases here. Note that sbit matches the internal value + * used by the library - otherwise we will get spurious errors from the + * internal sbit style approximation. + * + * The threshold test is here because otherwise the 16 to 8 conversion will + * proceed *without* gamma correction, and the tests above will fail (but not + * by much) - this could be fixed, it only appears with the -g option. + */ + unsigned int i, j; + for (i=0; ingamma_tests; ++i) + { + for (j=0; jngamma_tests; ++j) + { + if (i != j && + fabs(pm->gammas[j]/pm->gammas[i]-1) >= PNG_GAMMA_THRESHOLD) + { + gamma_transform_test(pm, 0, 16, 0, pm->interlace_type, + 1/pm->gammas[i], pm->gammas[j], SBIT_16_TO_8, + pm->use_input_precision_16to8, 1 /*scale16*/); + + if (fail(pm)) + return; + + gamma_transform_test(pm, 2, 16, 0, pm->interlace_type, + 1/pm->gammas[i], pm->gammas[j], SBIT_16_TO_8, + pm->use_input_precision_16to8, 1 /*scale16*/); + + if (fail(pm)) + return; + + gamma_transform_test(pm, 4, 16, 0, pm->interlace_type, + 1/pm->gammas[i], pm->gammas[j], SBIT_16_TO_8, + pm->use_input_precision_16to8, 1 /*scale16*/); + + if (fail(pm)) + return; + + gamma_transform_test(pm, 6, 16, 0, pm->interlace_type, + 1/pm->gammas[i], pm->gammas[j], SBIT_16_TO_8, + pm->use_input_precision_16to8, 1 /*scale16*/); + + if (fail(pm)) + return; + } + } + } +} +#endif /* 16 to 8 bit conversion */ + +#if defined(PNG_READ_BACKGROUND_SUPPORTED) ||\ + defined(PNG_READ_ALPHA_MODE_SUPPORTED) +static void gamma_composition_test(png_modifier *pm, + const png_byte colour_type, const png_byte bit_depth, + const int palette_number, + const int interlace_type, const double file_gamma, + const double screen_gamma, + const int use_input_precision, const int do_background, + const int expand_16) +{ + size_t pos = 0; + png_const_charp base; + double bg; + char name[128]; + png_color_16 background; + + /* Make up a name and get an appropriate background gamma value. */ + switch (do_background) + { + default: + base = ""; + bg = 4; /* should not be used */ + break; + case PNG_BACKGROUND_GAMMA_SCREEN: + base = " bckg(Screen):"; + bg = 1/screen_gamma; + break; + case PNG_BACKGROUND_GAMMA_FILE: + base = " bckg(File):"; + bg = file_gamma; + break; + case PNG_BACKGROUND_GAMMA_UNIQUE: + base = " bckg(Unique):"; + /* This tests the handling of a unique value, the math is such that the + * value tends to be <1, but is neither screen nor file (even if they + * match!) + */ + bg = (file_gamma + screen_gamma) / 3; + break; +#ifdef PNG_READ_ALPHA_MODE_SUPPORTED + case ALPHA_MODE_OFFSET + PNG_ALPHA_PNG: + base = " alpha(PNG)"; + bg = 4; /* should not be used */ + break; + case ALPHA_MODE_OFFSET + PNG_ALPHA_STANDARD: + base = " alpha(Porter-Duff)"; + bg = 4; /* should not be used */ + break; + case ALPHA_MODE_OFFSET + PNG_ALPHA_OPTIMIZED: + base = " alpha(Optimized)"; + bg = 4; /* should not be used */ + break; + case ALPHA_MODE_OFFSET + PNG_ALPHA_BROKEN: + base = " alpha(Broken)"; + bg = 4; /* should not be used */ + break; +#endif + } + + /* Use random background values - the background is always presented in the + * output space (8 or 16 bit components). + */ + if (expand_16 || bit_depth == 16) + { + png_uint_32 r = random_32(); + + background.red = (png_uint_16)r; + background.green = (png_uint_16)(r >> 16); + r = random_32(); + background.blue = (png_uint_16)r; + background.gray = (png_uint_16)(r >> 16); + + /* In earlier libpng versions, those where DIGITIZE is set, any background + * gamma correction in the expand16 case was done using 8-bit gamma + * correction tables, resulting in larger errors. To cope with those + * cases use a 16-bit background value which will handle this gamma + * correction. + */ +# if DIGITIZE + if (expand_16 && (do_background == PNG_BACKGROUND_GAMMA_UNIQUE || + do_background == PNG_BACKGROUND_GAMMA_FILE) && + fabs(bg*screen_gamma-1) > PNG_GAMMA_THRESHOLD) + { + /* The background values will be looked up in an 8-bit table to do + * the gamma correction, so only select values which are an exact + * match for the 8-bit table entries: + */ + background.red = (png_uint_16)((background.red >> 8) * 257); + background.green = (png_uint_16)((background.green >> 8) * 257); + background.blue = (png_uint_16)((background.blue >> 8) * 257); + background.gray = (png_uint_16)((background.gray >> 8) * 257); + } +# endif + } + + else /* 8 bit colors */ + { + png_uint_32 r = random_32(); + + background.red = (png_byte)r; + background.green = (png_byte)(r >> 8); + background.blue = (png_byte)(r >> 16); + background.gray = (png_byte)(r >> 24); + } + + background.index = 193; /* rgb(193,193,193) to detect errors */ + + if (!(colour_type & PNG_COLOR_MASK_COLOR)) + { + /* Because, currently, png_set_background is always called with + * 'need_expand' false in this case and because the gamma test itself + * doesn't cause an expand to 8-bit for lower bit depths the colour must + * be reduced to the correct range. + */ + if (bit_depth < 8) + background.gray &= (png_uint_16)((1U << bit_depth)-1); + + /* Grayscale input, we do not convert to RGB (TBD), so we must set the + * background to gray - else libpng seems to fail. + */ + background.red = background.green = background.blue = background.gray; + } + + pos = safecat(name, sizeof name, pos, "gamma "); + pos = safecatd(name, sizeof name, pos, file_gamma, 3); + pos = safecat(name, sizeof name, pos, "->"); + pos = safecatd(name, sizeof name, pos, screen_gamma, 3); + + pos = safecat(name, sizeof name, pos, base); + if (do_background < ALPHA_MODE_OFFSET) + { + /* Include the background color and gamma in the name: */ + pos = safecat(name, sizeof name, pos, "("); + /* This assumes no expand gray->rgb - the current code won't handle that! + */ + if (colour_type & PNG_COLOR_MASK_COLOR) + { + pos = safecatn(name, sizeof name, pos, background.red); + pos = safecat(name, sizeof name, pos, ","); + pos = safecatn(name, sizeof name, pos, background.green); + pos = safecat(name, sizeof name, pos, ","); + pos = safecatn(name, sizeof name, pos, background.blue); + } + else + pos = safecatn(name, sizeof name, pos, background.gray); + pos = safecat(name, sizeof name, pos, ")^"); + pos = safecatd(name, sizeof name, pos, bg, 3); + } + + gamma_test(pm, colour_type, bit_depth, palette_number, interlace_type, + file_gamma, screen_gamma, 0/*sBIT*/, 0, name, use_input_precision, + 0/*strip 16*/, expand_16, do_background, &background, bg); +} + + +static void +perform_gamma_composition_tests(png_modifier *pm, int do_background, + int expand_16) +{ + png_byte colour_type = 0; + png_byte bit_depth = 0; + unsigned int palette_number = 0; + + /* Skip the non-alpha cases - there is no setting of a transparency colour at + * present. + * + * TODO: incorrect; the palette case sets tRNS and, now RGB and gray do, + * however the palette case fails miserably so is commented out below. + */ + while (next_format(&colour_type, &bit_depth, &palette_number, + pm->test_lbg_gamma_composition, pm->test_tRNS)) + if ((colour_type & PNG_COLOR_MASK_ALPHA) != 0 +#if 0 /* TODO: FIXME */ + /*TODO: FIXME: this should work */ + || colour_type == 3 +#endif + || (colour_type != 3 && palette_number != 0)) + { + unsigned int i, j; + + /* Don't skip the i==j case here - it's relevant. */ + for (i=0; ingamma_tests; ++i) for (j=0; jngamma_tests; ++j) + { + gamma_composition_test(pm, colour_type, bit_depth, palette_number, + pm->interlace_type, 1/pm->gammas[i], pm->gammas[j], + pm->use_input_precision, do_background, expand_16); + + if (fail(pm)) + return; + } + } +} +#endif /* READ_BACKGROUND || READ_ALPHA_MODE */ + +static void +init_gamma_errors(png_modifier *pm) +{ + /* Use -1 to catch tests that were not actually run */ + pm->error_gray_2 = pm->error_gray_4 = pm->error_gray_8 = -1.; + pm->error_color_8 = -1.; + pm->error_indexed = -1.; + pm->error_gray_16 = pm->error_color_16 = -1.; +} + +static void +print_one(const char *leader, double err) +{ + if (err != -1.) + printf(" %s %.5f\n", leader, err); +} + +static void +summarize_gamma_errors(png_modifier *pm, png_const_charp who, int low_bit_depth, + int indexed) +{ + fflush(stderr); + + if (who) + printf("\nGamma correction with %s:\n", who); + + else + printf("\nBasic gamma correction:\n"); + + if (low_bit_depth) + { + print_one(" 2 bit gray: ", pm->error_gray_2); + print_one(" 4 bit gray: ", pm->error_gray_4); + print_one(" 8 bit gray: ", pm->error_gray_8); + print_one(" 8 bit color:", pm->error_color_8); + if (indexed) + print_one(" indexed: ", pm->error_indexed); + } + + print_one("16 bit gray: ", pm->error_gray_16); + print_one("16 bit color:", pm->error_color_16); + + fflush(stdout); +} + +static void +perform_gamma_test(png_modifier *pm, int summary) +{ + /*TODO: remove this*/ + /* Save certain values for the temporary overrides below. */ + unsigned int calculations_use_input_precision = + pm->calculations_use_input_precision; +# ifdef PNG_READ_BACKGROUND_SUPPORTED + double maxout8 = pm->maxout8; +# endif + + /* First some arbitrary no-transform tests: */ + if (!pm->this.speed && pm->test_gamma_threshold) + { + perform_gamma_threshold_tests(pm); + + if (fail(pm)) + return; + } + + /* Now some real transforms. */ + if (pm->test_gamma_transform) + { + if (summary) + { + fflush(stderr); + printf("Gamma correction error summary\n\n"); + printf("The printed value is the maximum error in the pixel values\n"); + printf("calculated by the libpng gamma correction code. The error\n"); + printf("is calculated as the difference between the output pixel\n"); + printf("value (always an integer) and the ideal value from the\n"); + printf("libpng specification (typically not an integer).\n\n"); + + printf("Expect this value to be less than .5 for 8 bit formats,\n"); + printf("less than 1 for formats with fewer than 8 bits and a small\n"); + printf("number (typically less than 5) for the 16 bit formats.\n"); + printf("For performance reasons the value for 16 bit formats\n"); + printf("increases when the image file includes an sBIT chunk.\n"); + fflush(stdout); + } + + init_gamma_errors(pm); + /*TODO: remove this. Necessary because the current libpng + * implementation works in 8 bits: + */ + if (pm->test_gamma_expand16) + pm->calculations_use_input_precision = 1; + perform_gamma_transform_tests(pm); + if (!calculations_use_input_precision) + pm->calculations_use_input_precision = 0; + + if (summary) + summarize_gamma_errors(pm, 0/*who*/, 1/*low bit depth*/, 1/*indexed*/); + + if (fail(pm)) + return; + } + + /* The sbit tests produce much larger errors: */ + if (pm->test_gamma_sbit) + { + init_gamma_errors(pm); + perform_gamma_sbit_tests(pm); + + if (summary) + summarize_gamma_errors(pm, "sBIT", pm->sbitlow < 8U, 1/*indexed*/); + + if (fail(pm)) + return; + } + +#ifdef DO_16BIT /* Should be READ_16BIT_SUPPORTED */ + if (pm->test_gamma_scale16) + { + /* The 16 to 8 bit strip operations: */ + init_gamma_errors(pm); + perform_gamma_scale16_tests(pm); + + if (summary) + { + fflush(stderr); + printf("\nGamma correction with 16 to 8 bit reduction:\n"); + printf(" 16 bit gray: %.5f\n", pm->error_gray_16); + printf(" 16 bit color: %.5f\n", pm->error_color_16); + fflush(stdout); + } + + if (fail(pm)) + return; + } +#endif + +#ifdef PNG_READ_BACKGROUND_SUPPORTED + if (pm->test_gamma_background) + { + init_gamma_errors(pm); + + /*TODO: remove this. Necessary because the current libpng + * implementation works in 8 bits: + */ + if (pm->test_gamma_expand16) + { + pm->calculations_use_input_precision = 1; + pm->maxout8 = .499; /* because the 16 bit background is smashed */ + } + perform_gamma_composition_tests(pm, PNG_BACKGROUND_GAMMA_UNIQUE, + pm->test_gamma_expand16); + if (!calculations_use_input_precision) + pm->calculations_use_input_precision = 0; + pm->maxout8 = maxout8; + + if (summary) + summarize_gamma_errors(pm, "background", 1, 0/*indexed*/); + + if (fail(pm)) + return; + } +#endif + +#ifdef PNG_READ_ALPHA_MODE_SUPPORTED + if (pm->test_gamma_alpha_mode) + { + int do_background; + + init_gamma_errors(pm); + + /*TODO: remove this. Necessary because the current libpng + * implementation works in 8 bits: + */ + if (pm->test_gamma_expand16) + pm->calculations_use_input_precision = 1; + for (do_background = ALPHA_MODE_OFFSET + PNG_ALPHA_STANDARD; + do_background <= ALPHA_MODE_OFFSET + PNG_ALPHA_BROKEN && !fail(pm); + ++do_background) + perform_gamma_composition_tests(pm, do_background, + pm->test_gamma_expand16); + if (!calculations_use_input_precision) + pm->calculations_use_input_precision = 0; + + if (summary) + summarize_gamma_errors(pm, "alpha mode", 1, 0/*indexed*/); + + if (fail(pm)) + return; + } +#endif +} +#endif /* PNG_READ_GAMMA_SUPPORTED */ +#endif /* PNG_READ_SUPPORTED */ + +/* INTERLACE MACRO VALIDATION */ +/* This is copied verbatim from the specification, it is simply the pass + * number in which each pixel in each 8x8 tile appears. The array must + * be indexed adam7[y][x] and notice that the pass numbers are based at + * 1, not 0 - the base libpng uses. + */ +static const +png_byte adam7[8][8] = +{ + { 1,6,4,6,2,6,4,6 }, + { 7,7,7,7,7,7,7,7 }, + { 5,6,5,6,5,6,5,6 }, + { 7,7,7,7,7,7,7,7 }, + { 3,6,4,6,3,6,4,6 }, + { 7,7,7,7,7,7,7,7 }, + { 5,6,5,6,5,6,5,6 }, + { 7,7,7,7,7,7,7,7 } +}; + +/* This routine validates all the interlace support macros in png.h for + * a variety of valid PNG widths and heights. It uses a number of similarly + * named internal routines that feed off the above array. + */ +static png_uint_32 +png_pass_start_row(int pass) +{ + int x, y; + ++pass; + for (y=0; y<8; ++y) for (x=0; x<8; ++x) if (adam7[y][x] == pass) + return y; + return 0xf; +} + +static png_uint_32 +png_pass_start_col(int pass) +{ + int x, y; + ++pass; + for (x=0; x<8; ++x) for (y=0; y<8; ++y) if (adam7[y][x] == pass) + return x; + return 0xf; +} + +static int +png_pass_row_shift(int pass) +{ + int x, y, base=(-1), inc=8; + ++pass; + for (y=0; y<8; ++y) for (x=0; x<8; ++x) if (adam7[y][x] == pass) + { + if (base == (-1)) + base = y; + else if (base == y) + {} + else if (inc == y-base) + base=y; + else if (inc == 8) + inc = y-base, base=y; + else if (inc != y-base) + return 0xff; /* error - more than one 'inc' value! */ + } + + if (base == (-1)) return 0xfe; /* error - no row in pass! */ + + /* The shift is always 1, 2 or 3 - no pass has all the rows! */ + switch (inc) + { +case 2: return 1; +case 4: return 2; +case 8: return 3; +default: break; + } + + /* error - unrecognized 'inc' */ + return (inc << 8) + 0xfd; +} + +static int +png_pass_col_shift(int pass) +{ + int x, y, base=(-1), inc=8; + ++pass; + for (x=0; x<8; ++x) for (y=0; y<8; ++y) if (adam7[y][x] == pass) + { + if (base == (-1)) + base = x; + else if (base == x) + {} + else if (inc == x-base) + base=x; + else if (inc == 8) + inc = x-base, base=x; + else if (inc != x-base) + return 0xff; /* error - more than one 'inc' value! */ + } + + if (base == (-1)) return 0xfe; /* error - no row in pass! */ + + /* The shift is always 1, 2 or 3 - no pass has all the rows! */ + switch (inc) + { +case 1: return 0; /* pass 7 has all the columns */ +case 2: return 1; +case 4: return 2; +case 8: return 3; +default: break; + } + + /* error - unrecognized 'inc' */ + return (inc << 8) + 0xfd; +} + +static png_uint_32 +png_row_from_pass_row(png_uint_32 yIn, int pass) +{ + /* By examination of the array: */ + switch (pass) + { +case 0: return yIn * 8; +case 1: return yIn * 8; +case 2: return yIn * 8 + 4; +case 3: return yIn * 4; +case 4: return yIn * 4 + 2; +case 5: return yIn * 2; +case 6: return yIn * 2 + 1; +default: break; + } + + return 0xff; /* bad pass number */ +} + +static png_uint_32 +png_col_from_pass_col(png_uint_32 xIn, int pass) +{ + /* By examination of the array: */ + switch (pass) + { +case 0: return xIn * 8; +case 1: return xIn * 8 + 4; +case 2: return xIn * 4; +case 3: return xIn * 4 + 2; +case 4: return xIn * 2; +case 5: return xIn * 2 + 1; +case 6: return xIn; +default: break; + } + + return 0xff; /* bad pass number */ +} + +static int +png_row_in_interlace_pass(png_uint_32 y, int pass) +{ + /* Is row 'y' in pass 'pass'? */ + int x; + y &= 7; + ++pass; + for (x=0; x<8; ++x) if (adam7[y][x] == pass) + return 1; + + return 0; +} + +static int +png_col_in_interlace_pass(png_uint_32 x, int pass) +{ + /* Is column 'x' in pass 'pass'? */ + int y; + x &= 7; + ++pass; + for (y=0; y<8; ++y) if (adam7[y][x] == pass) + return 1; + + return 0; +} + +static png_uint_32 +png_pass_rows(png_uint_32 height, int pass) +{ + png_uint_32 tiles = height>>3; + png_uint_32 rows = 0; + unsigned int x, y; + + height &= 7; + ++pass; + for (y=0; y<8; ++y) for (x=0; x<8; ++x) if (adam7[y][x] == pass) + { + rows += tiles; + if (y < height) ++rows; + break; /* i.e. break the 'x', column, loop. */ + } + + return rows; +} + +static png_uint_32 +png_pass_cols(png_uint_32 width, int pass) +{ + png_uint_32 tiles = width>>3; + png_uint_32 cols = 0; + unsigned int x, y; + + width &= 7; + ++pass; + for (x=0; x<8; ++x) for (y=0; y<8; ++y) if (adam7[y][x] == pass) + { + cols += tiles; + if (x < width) ++cols; + break; /* i.e. break the 'y', row, loop. */ + } + + return cols; +} + +static void +perform_interlace_macro_validation(void) +{ + /* The macros to validate, first those that depend only on pass: + * + * PNG_PASS_START_ROW(pass) + * PNG_PASS_START_COL(pass) + * PNG_PASS_ROW_SHIFT(pass) + * PNG_PASS_COL_SHIFT(pass) + */ + int pass; + + for (pass=0; pass<7; ++pass) + { + png_uint_32 m, f, v; + + m = PNG_PASS_START_ROW(pass); + f = png_pass_start_row(pass); + if (m != f) + { + fprintf(stderr, "PNG_PASS_START_ROW(%d) = %u != %x\n", pass, m, f); + exit(99); + } + + m = PNG_PASS_START_COL(pass); + f = png_pass_start_col(pass); + if (m != f) + { + fprintf(stderr, "PNG_PASS_START_COL(%d) = %u != %x\n", pass, m, f); + exit(99); + } + + m = PNG_PASS_ROW_SHIFT(pass); + f = png_pass_row_shift(pass); + if (m != f) + { + fprintf(stderr, "PNG_PASS_ROW_SHIFT(%d) = %u != %x\n", pass, m, f); + exit(99); + } + + m = PNG_PASS_COL_SHIFT(pass); + f = png_pass_col_shift(pass); + if (m != f) + { + fprintf(stderr, "PNG_PASS_COL_SHIFT(%d) = %u != %x\n", pass, m, f); + exit(99); + } + + /* Macros that depend on the image or sub-image height too: + * + * PNG_PASS_ROWS(height, pass) + * PNG_PASS_COLS(width, pass) + * PNG_ROW_FROM_PASS_ROW(yIn, pass) + * PNG_COL_FROM_PASS_COL(xIn, pass) + * PNG_ROW_IN_INTERLACE_PASS(y, pass) + * PNG_COL_IN_INTERLACE_PASS(x, pass) + */ + for (v=0;;) + { + /* First the base 0 stuff: */ + m = PNG_ROW_FROM_PASS_ROW(v, pass); + f = png_row_from_pass_row(v, pass); + if (m != f) + { + fprintf(stderr, "PNG_ROW_FROM_PASS_ROW(%u, %d) = %u != %x\n", + v, pass, m, f); + exit(99); + } + + m = PNG_COL_FROM_PASS_COL(v, pass); + f = png_col_from_pass_col(v, pass); + if (m != f) + { + fprintf(stderr, "PNG_COL_FROM_PASS_COL(%u, %d) = %u != %x\n", + v, pass, m, f); + exit(99); + } + + m = PNG_ROW_IN_INTERLACE_PASS(v, pass); + f = png_row_in_interlace_pass(v, pass); + if (m != f) + { + fprintf(stderr, "PNG_ROW_IN_INTERLACE_PASS(%u, %d) = %u != %x\n", + v, pass, m, f); + exit(99); + } + + m = PNG_COL_IN_INTERLACE_PASS(v, pass); + f = png_col_in_interlace_pass(v, pass); + if (m != f) + { + fprintf(stderr, "PNG_COL_IN_INTERLACE_PASS(%u, %d) = %u != %x\n", + v, pass, m, f); + exit(99); + } + + /* Then the base 1 stuff: */ + ++v; + m = PNG_PASS_ROWS(v, pass); + f = png_pass_rows(v, pass); + if (m != f) + { + fprintf(stderr, "PNG_PASS_ROWS(%u, %d) = %u != %x\n", + v, pass, m, f); + exit(99); + } + + m = PNG_PASS_COLS(v, pass); + f = png_pass_cols(v, pass); + if (m != f) + { + fprintf(stderr, "PNG_PASS_COLS(%u, %d) = %u != %x\n", + v, pass, m, f); + exit(99); + } + + /* Move to the next v - the stepping algorithm starts skipping + * values above 1024. + */ + if (v > 1024) + { + if (v == PNG_UINT_31_MAX) + break; + + v = (v << 1) ^ v; + if (v >= PNG_UINT_31_MAX) + v = PNG_UINT_31_MAX-1; + } + } + } +} + +/* Test color encodings. These values are back-calculated from the published + * chromaticities. The values are accurate to about 14 decimal places; 15 are + * given. These values are much more accurate than the ones given in the spec, + * which typically don't exceed 4 decimal places. This allows testing of the + * libpng code to its theoretical accuracy of 4 decimal places. (If pngvalid + * used the published errors the 'slack' permitted would have to be +/-.5E-4 or + * more.) + * + * The png_modifier code assumes that encodings[0] is sRGB and treats it + * specially: do not change the first entry in this list! + */ +static const color_encoding test_encodings[] = +{ +/* sRGB: must be first in this list! */ +/*gamma:*/ { 1/2.2, +/*red: */ { 0.412390799265959, 0.212639005871510, 0.019330818715592 }, +/*green:*/ { 0.357584339383878, 0.715168678767756, 0.119194779794626 }, +/*blue: */ { 0.180480788401834, 0.072192315360734, 0.950532152249660} }, +/* Kodak ProPhoto (wide gamut) */ +/*gamma:*/ { 1/1.6 /*approximate: uses 1.8 power law compared to sRGB 2.4*/, +/*red: */ { 0.797760489672303, 0.288071128229293, 0.000000000000000 }, +/*green:*/ { 0.135185837175740, 0.711843217810102, 0.000000000000000 }, +/*blue: */ { 0.031349349581525, 0.000085653960605, 0.825104602510460} }, +/* Adobe RGB (1998) */ +/*gamma:*/ { 1/(2+51./256), +/*red: */ { 0.576669042910131, 0.297344975250536, 0.027031361386412 }, +/*green:*/ { 0.185558237906546, 0.627363566255466, 0.070688852535827 }, +/*blue: */ { 0.188228646234995, 0.075291458493998, 0.991337536837639} }, +/* Adobe Wide Gamut RGB */ +/*gamma:*/ { 1/(2+51./256), +/*red: */ { 0.716500716779386, 0.258728243040113, 0.000000000000000 }, +/*green:*/ { 0.101020574397477, 0.724682314948566, 0.051211818965388 }, +/*blue: */ { 0.146774385252705, 0.016589442011321, 0.773892783545073} }, +/* Fake encoding which selects just the green channel */ +/*gamma:*/ { 1.45/2.2, /* the 'Mac' gamma */ +/*red: */ { 0.716500716779386, 0.000000000000000, 0.000000000000000 }, +/*green:*/ { 0.101020574397477, 1.000000000000000, 0.051211818965388 }, +/*blue: */ { 0.146774385252705, 0.000000000000000, 0.773892783545073} }, +}; + +/* signal handler + * + * This attempts to trap signals and escape without crashing. It needs a + * context pointer so that it can throw an exception (call longjmp) to recover + * from the condition; this is handled by making the png_modifier used by 'main' + * into a global variable. + */ +static png_modifier pm; + +static void signal_handler(int signum) +{ + + size_t pos = 0; + char msg[64]; + + pos = safecat(msg, sizeof msg, pos, "caught signal: "); + + switch (signum) + { + case SIGABRT: + pos = safecat(msg, sizeof msg, pos, "abort"); + break; + + case SIGFPE: + pos = safecat(msg, sizeof msg, pos, "floating point exception"); + break; + + case SIGILL: + pos = safecat(msg, sizeof msg, pos, "illegal instruction"); + break; + + case SIGINT: + pos = safecat(msg, sizeof msg, pos, "interrupt"); + break; + + case SIGSEGV: + pos = safecat(msg, sizeof msg, pos, "invalid memory access"); + break; + + case SIGTERM: + pos = safecat(msg, sizeof msg, pos, "termination request"); + break; + + default: + pos = safecat(msg, sizeof msg, pos, "unknown "); + pos = safecatn(msg, sizeof msg, pos, signum); + break; + } + + store_log(&pm.this, NULL/*png_structp*/, msg, 1/*error*/); + + /* And finally throw an exception so we can keep going, unless this is + * SIGTERM in which case stop now. + */ + if (signum != SIGTERM) + { + struct exception_context *the_exception_context = + &pm.this.exception_context; + + Throw &pm.this; + } + + else + exit(1); +} + +/* main program */ +int main(int argc, char **argv) +{ + int summary = 1; /* Print the error summary at the end */ + int memstats = 0; /* Print memory statistics at the end */ + + /* Create the given output file on success: */ + const char *touch = NULL; + + /* This is an array of standard gamma values (believe it or not I've seen + * every one of these mentioned somewhere.) + * + * In the following list the most useful values are first! + */ + static double + gammas[]={2.2, 1.0, 2.2/1.45, 1.8, 1.5, 2.4, 2.5, 2.62, 2.9}; + + /* This records the command and arguments: */ + size_t cp = 0; + char command[1024]; + + anon_context(&pm.this); + + gnu_volatile(summary) + gnu_volatile(memstats) + gnu_volatile(touch) + + /* Add appropriate signal handlers, just the ANSI specified ones: */ + signal(SIGABRT, signal_handler); + signal(SIGFPE, signal_handler); + signal(SIGILL, signal_handler); + signal(SIGINT, signal_handler); + signal(SIGSEGV, signal_handler); + signal(SIGTERM, signal_handler); + +#ifdef HAVE_FEENABLEEXCEPT + /* Only required to enable FP exceptions on platforms where they start off + * disabled; this is not necessary but if it is not done pngvalid will likely + * end up ignoring FP conditions that other platforms fault. + */ + feenableexcept(FE_DIVBYZERO | FE_INVALID | FE_OVERFLOW); +#endif + + modifier_init(&pm); + + /* Preallocate the image buffer, because we know how big it needs to be, + * note that, for testing purposes, it is deliberately mis-aligned by tag + * bytes either side. All rows have an additional five bytes of padding for + * overwrite checking. + */ + store_ensure_image(&pm.this, NULL, 2, TRANSFORM_ROWMAX, TRANSFORM_HEIGHTMAX); + + /* Don't give argv[0], it's normally some horrible libtool string: */ + cp = safecat(command, sizeof command, cp, "pngvalid"); + + /* Default to error on warning: */ + pm.this.treat_warnings_as_errors = 1; + + /* Default assume_16_bit_calculations appropriately; this tells the checking + * code that 16-bit arithmetic is used for 8-bit samples when it would make a + * difference. + */ + pm.assume_16_bit_calculations = PNG_LIBPNG_VER >= 10700; + + /* Currently 16 bit expansion happens at the end of the pipeline, so the + * calculations are done in the input bit depth not the output. + * + * TODO: fix this + */ + pm.calculations_use_input_precision = 1U; + + /* Store the test gammas */ + pm.gammas = gammas; + pm.ngammas = ARRAY_SIZE(gammas); + pm.ngamma_tests = 0; /* default to off */ + + /* Low bit depth gray images don't do well in the gamma tests, until + * this is fixed turn them off for some gamma cases: + */ +# ifdef PNG_WRITE_tRNS_SUPPORTED + pm.test_tRNS = 1; +# endif + pm.test_lbg = PNG_LIBPNG_VER >= 10600; + pm.test_lbg_gamma_threshold = 1; + pm.test_lbg_gamma_transform = PNG_LIBPNG_VER >= 10600; + pm.test_lbg_gamma_sbit = 1; + pm.test_lbg_gamma_composition = PNG_LIBPNG_VER >= 10700; + + /* And the test encodings */ + pm.encodings = test_encodings; + pm.nencodings = ARRAY_SIZE(test_encodings); + +# if PNG_LIBPNG_VER < 10700 + pm.sbitlow = 8U; /* because libpng doesn't do sBIT below 8! */ +# else + pm.sbitlow = 1U; +# endif + + /* The following allows results to pass if they correspond to anything in the + * transformed range [input-.5,input+.5]; this is is required because of the + * way libpng treates the 16_TO_8 flag when building the gamma tables in + * releases up to 1.6.0. + * + * TODO: review this + */ + pm.use_input_precision_16to8 = 1U; + pm.use_input_precision_sbit = 1U; /* because libpng now rounds sBIT */ + + /* Some default values (set the behavior for 'make check' here). + * These values simply control the maximum error permitted in the gamma + * transformations. The practial limits for human perception are described + * below (the setting for maxpc16), however for 8 bit encodings it isn't + * possible to meet the accepted capabilities of human vision - i.e. 8 bit + * images can never be good enough, regardless of encoding. + */ + pm.maxout8 = .1; /* Arithmetic error in *encoded* value */ + pm.maxabs8 = .00005; /* 1/20000 */ + pm.maxcalc8 = 1./255; /* +/-1 in 8 bits for compose errors */ + pm.maxpc8 = .499; /* I.e., .499% fractional error */ + pm.maxout16 = .499; /* Error in *encoded* value */ + pm.maxabs16 = .00005;/* 1/20000 */ + pm.maxcalc16 =1./65535;/* +/-1 in 16 bits for compose errors */ +# if PNG_LIBPNG_VER < 10700 + pm.maxcalcG = 1./((1<38149 by the following: + */ + pm.maxpc16 = .005; /* I.e., 1/200% - 1/20000 */ + + /* Now parse the command line options. */ + while (--argc >= 1) + { + int catmore = 0; /* Set if the argument has an argument. */ + + /* Record each argument for posterity: */ + cp = safecat(command, sizeof command, cp, " "); + cp = safecat(command, sizeof command, cp, *++argv); + + if (strcmp(*argv, "-v") == 0) + pm.this.verbose = 1; + + else if (strcmp(*argv, "-l") == 0) + pm.log = 1; + + else if (strcmp(*argv, "-q") == 0) + summary = pm.this.verbose = pm.log = 0; + + else if (strcmp(*argv, "-w") == 0 || + strcmp(*argv, "--strict") == 0) + pm.this.treat_warnings_as_errors = 1; /* NOTE: this is the default! */ + + else if (strcmp(*argv, "--nostrict") == 0) + pm.this.treat_warnings_as_errors = 0; + + else if (strcmp(*argv, "--speed") == 0) + pm.this.speed = 1, pm.ngamma_tests = pm.ngammas, pm.test_standard = 0, + summary = 0; + + else if (strcmp(*argv, "--memory") == 0) + memstats = 1; + + else if (strcmp(*argv, "--size") == 0) + pm.test_size = 1; + + else if (strcmp(*argv, "--nosize") == 0) + pm.test_size = 0; + + else if (strcmp(*argv, "--standard") == 0) + pm.test_standard = 1; + + else if (strcmp(*argv, "--nostandard") == 0) + pm.test_standard = 0; + + else if (strcmp(*argv, "--transform") == 0) + pm.test_transform = 1; + + else if (strcmp(*argv, "--notransform") == 0) + pm.test_transform = 0; + +#ifdef PNG_READ_TRANSFORMS_SUPPORTED + else if (strncmp(*argv, "--transform-disable=", + sizeof "--transform-disable") == 0) + { + pm.test_transform = 1; + transform_disable(*argv + sizeof "--transform-disable"); + } + + else if (strncmp(*argv, "--transform-enable=", + sizeof "--transform-enable") == 0) + { + pm.test_transform = 1; + transform_enable(*argv + sizeof "--transform-enable"); + } +#endif /* PNG_READ_TRANSFORMS_SUPPORTED */ + + else if (strcmp(*argv, "--gamma") == 0) + { + /* Just do two gamma tests here (2.2 and linear) for speed: */ + pm.ngamma_tests = 2U; + pm.test_gamma_threshold = 1; + pm.test_gamma_transform = 1; + pm.test_gamma_sbit = 1; + pm.test_gamma_scale16 = 1; + pm.test_gamma_background = 1; /* composition */ + pm.test_gamma_alpha_mode = 1; + } + + else if (strcmp(*argv, "--nogamma") == 0) + pm.ngamma_tests = 0; + + else if (strcmp(*argv, "--gamma-threshold") == 0) + pm.ngamma_tests = 2U, pm.test_gamma_threshold = 1; + + else if (strcmp(*argv, "--nogamma-threshold") == 0) + pm.test_gamma_threshold = 0; + + else if (strcmp(*argv, "--gamma-transform") == 0) + pm.ngamma_tests = 2U, pm.test_gamma_transform = 1; + + else if (strcmp(*argv, "--nogamma-transform") == 0) + pm.test_gamma_transform = 0; + + else if (strcmp(*argv, "--gamma-sbit") == 0) + pm.ngamma_tests = 2U, pm.test_gamma_sbit = 1; + + else if (strcmp(*argv, "--nogamma-sbit") == 0) + pm.test_gamma_sbit = 0; + + else if (strcmp(*argv, "--gamma-16-to-8") == 0) + pm.ngamma_tests = 2U, pm.test_gamma_scale16 = 1; + + else if (strcmp(*argv, "--nogamma-16-to-8") == 0) + pm.test_gamma_scale16 = 0; + + else if (strcmp(*argv, "--gamma-background") == 0) + pm.ngamma_tests = 2U, pm.test_gamma_background = 1; + + else if (strcmp(*argv, "--nogamma-background") == 0) + pm.test_gamma_background = 0; + + else if (strcmp(*argv, "--gamma-alpha-mode") == 0) + pm.ngamma_tests = 2U, pm.test_gamma_alpha_mode = 1; + + else if (strcmp(*argv, "--nogamma-alpha-mode") == 0) + pm.test_gamma_alpha_mode = 0; + + else if (strcmp(*argv, "--expand16") == 0) + pm.test_gamma_expand16 = 1; + + else if (strcmp(*argv, "--noexpand16") == 0) + pm.test_gamma_expand16 = 0; + + else if (strcmp(*argv, "--low-depth-gray") == 0) + pm.test_lbg = pm.test_lbg_gamma_threshold = + pm.test_lbg_gamma_transform = pm.test_lbg_gamma_sbit = + pm.test_lbg_gamma_composition = 1; + + else if (strcmp(*argv, "--nolow-depth-gray") == 0) + pm.test_lbg = pm.test_lbg_gamma_threshold = + pm.test_lbg_gamma_transform = pm.test_lbg_gamma_sbit = + pm.test_lbg_gamma_composition = 0; + +# ifdef PNG_WRITE_tRNS_SUPPORTED + else if (strcmp(*argv, "--tRNS") == 0) + pm.test_tRNS = 1; +# endif + + else if (strcmp(*argv, "--notRNS") == 0) + pm.test_tRNS = 0; + + else if (strcmp(*argv, "--more-gammas") == 0) + pm.ngamma_tests = 3U; + + else if (strcmp(*argv, "--all-gammas") == 0) + pm.ngamma_tests = pm.ngammas; + + else if (strcmp(*argv, "--progressive-read") == 0) + pm.this.progressive = 1; + + else if (strcmp(*argv, "--use-update-info") == 0) + ++pm.use_update_info; /* Can call multiple times */ + + else if (strcmp(*argv, "--interlace") == 0) + { +# if CAN_WRITE_INTERLACE + pm.interlace_type = PNG_INTERLACE_ADAM7; +# else /* !CAN_WRITE_INTERLACE */ + fprintf(stderr, "pngvalid: no write interlace support\n"); + return SKIP; +# endif /* !CAN_WRITE_INTERLACE */ + } + + else if (strcmp(*argv, "--use-input-precision") == 0) + pm.use_input_precision = 1U; + + else if (strcmp(*argv, "--use-calculation-precision") == 0) + pm.use_input_precision = 0; + + else if (strcmp(*argv, "--calculations-use-input-precision") == 0) + pm.calculations_use_input_precision = 1U; + + else if (strcmp(*argv, "--assume-16-bit-calculations") == 0) + pm.assume_16_bit_calculations = 1U; + + else if (strcmp(*argv, "--calculations-follow-bit-depth") == 0) + pm.calculations_use_input_precision = + pm.assume_16_bit_calculations = 0; + + else if (strcmp(*argv, "--exhaustive") == 0) + pm.test_exhaustive = 1; + + else if (argc > 1 && strcmp(*argv, "--sbitlow") == 0) + --argc, pm.sbitlow = (png_byte)atoi(*++argv), catmore = 1; + + else if (argc > 1 && strcmp(*argv, "--touch") == 0) + --argc, touch = *++argv, catmore = 1; + + else if (argc > 1 && strncmp(*argv, "--max", 5) == 0) + { + --argc; + + if (strcmp(5+*argv, "abs8") == 0) + pm.maxabs8 = atof(*++argv); + + else if (strcmp(5+*argv, "abs16") == 0) + pm.maxabs16 = atof(*++argv); + + else if (strcmp(5+*argv, "calc8") == 0) + pm.maxcalc8 = atof(*++argv); + + else if (strcmp(5+*argv, "calc16") == 0) + pm.maxcalc16 = atof(*++argv); + + else if (strcmp(5+*argv, "out8") == 0) + pm.maxout8 = atof(*++argv); + + else if (strcmp(5+*argv, "out16") == 0) + pm.maxout16 = atof(*++argv); + + else if (strcmp(5+*argv, "pc8") == 0) + pm.maxpc8 = atof(*++argv); + + else if (strcmp(5+*argv, "pc16") == 0) + pm.maxpc16 = atof(*++argv); + + else + { + fprintf(stderr, "pngvalid: %s: unknown 'max' option\n", *argv); + exit(99); + } + + catmore = 1; + } + + else if (strcmp(*argv, "--log8") == 0) + --argc, pm.log8 = atof(*++argv), catmore = 1; + + else if (strcmp(*argv, "--log16") == 0) + --argc, pm.log16 = atof(*++argv), catmore = 1; + +#ifdef PNG_SET_OPTION_SUPPORTED + else if (strncmp(*argv, "--option=", 9) == 0) + { + /* Syntax of the argument is