From 4db70369bb58c270b362c5696a6fe8c91a1a0217 Mon Sep 17 00:00:00 2001 From: William Joye Date: Wed, 2 Jan 2019 16:21:14 -0500 Subject: update TEA 3.13 --- tls/ChangeLog | 514 --- tls/Makefile.in | 469 --- tls/README.txt | 35 - tls/aclocal.m4 | 168 - tls/configure | 9658 ------------------------------------------- tls/configure.ac | 240 -- tls/fixstrtod.c | 38 - tls/license.terms | 38 - tls/pkgIndex.tcl.in | 5 - tls/tclOpts.h | 55 - tls/tclconfig/ChangeLog | 1003 ----- tls/tclconfig/README.txt | 26 - tls/tclconfig/install-sh | 528 --- tls/tclconfig/tcl.m4 | 4176 ------------------- tls/tests/all.tcl | 56 - tls/tests/certs/README.txt | 9 - tls/tests/certs/ca.pem | 18 - tls/tests/certs/client.key | 15 - tls/tests/certs/client.pem | 14 - tls/tests/certs/client.req | 11 - tls/tests/certs/file.srl | 1 - tls/tests/certs/privkey.pem | 18 - tls/tests/certs/server.key | 15 - tls/tests/certs/server.pem | 14 - tls/tests/certs/server.req | 11 - tls/tests/ciphers.test | 159 - tls/tests/keytest1.tcl | 23 - tls/tests/keytest2.tcl | 8 - tls/tests/remote.tcl | 185 - tls/tests/simpleClient.tcl | 113 - tls/tests/simpleServer.tcl | 90 - tls/tests/tlsIO.test | 2072 ---------- tls/tls.c | 1833 -------- tls/tls.h | 41 - tls/tls.htm | 432 -- tls/tls.tcl | 271 -- tls/tlsBIO.c | 242 -- tls/tlsConfig.sh.in | 45 - tls/tlsIO.c | 1005 ----- tls/tlsInt.h | 262 -- tls/tlsX509.c | 179 - tls/win/makefile.vc | 496 --- tls/win/nmakehlp.c | 767 ---- tls/win/rules.vc | 622 --- tls/win/tls.rc | 40 - 45 files changed, 26020 deletions(-) delete mode 100644 tls/ChangeLog delete mode 100644 tls/Makefile.in delete mode 100644 tls/README.txt delete mode 100644 tls/aclocal.m4 delete mode 100755 tls/configure delete mode 100644 tls/configure.ac delete mode 100644 tls/fixstrtod.c delete mode 100644 tls/license.terms delete mode 100644 tls/pkgIndex.tcl.in delete mode 100644 tls/tclOpts.h delete mode 100644 tls/tclconfig/ChangeLog delete mode 100644 tls/tclconfig/README.txt delete mode 100755 tls/tclconfig/install-sh delete mode 100644 tls/tclconfig/tcl.m4 delete mode 100644 tls/tests/all.tcl delete mode 100644 tls/tests/certs/README.txt delete mode 100644 tls/tests/certs/ca.pem delete mode 100644 tls/tests/certs/client.key delete mode 100644 tls/tests/certs/client.pem delete mode 100644 tls/tests/certs/client.req delete mode 100644 tls/tests/certs/file.srl delete mode 100644 tls/tests/certs/privkey.pem delete mode 100644 tls/tests/certs/server.key delete mode 100644 tls/tests/certs/server.pem delete mode 100644 tls/tests/certs/server.req delete mode 100644 tls/tests/ciphers.test delete mode 100644 tls/tests/keytest1.tcl delete mode 100644 tls/tests/keytest2.tcl delete mode 100755 tls/tests/remote.tcl delete mode 100755 tls/tests/simpleClient.tcl delete mode 100755 tls/tests/simpleServer.tcl delete mode 100755 tls/tests/tlsIO.test delete mode 100644 tls/tls.c delete mode 100644 tls/tls.h delete mode 100644 tls/tls.htm delete mode 100644 tls/tls.tcl delete mode 100644 tls/tlsBIO.c delete mode 100755 tls/tlsConfig.sh.in delete mode 100644 tls/tlsIO.c delete mode 100644 tls/tlsInt.h delete mode 100644 tls/tlsX509.c delete mode 100644 tls/win/makefile.vc delete mode 100644 tls/win/nmakehlp.c delete mode 100644 tls/win/rules.vc delete mode 100644 tls/win/tls.rc diff --git a/tls/ChangeLog b/tls/ChangeLog deleted file mode 100644 index 0ec4367..0000000 --- a/tls/ChangeLog +++ /dev/null @@ -1,514 +0,0 @@ -2015-05-01 Andreas Kupries - - * configure.in: Bump to version 1.6.5. - * win/makefile.vc: - * configure: regen with ac-2.59 - * tls.c: Accepted SF TLS [bug/patch #57](https://sourceforge.net/p/tls/bugs/57/). - * tlsIO.c: Accepted core Tcl patch in [ticket](http://core.tcl.tk/tcl/tktview/0f94f855cafed92d0e174b7d835453a02831b4dd). - -2014-12-05 Andreas Kupries - - * configure.in: Bump to version 1.6.4. - * win/makefile.vc: - * configure: regen with ac-2.59 - * tls.c: Accepted SF TLS patches #12 and #13 implementing - * tls.htm: support for SNI, and TLS 1.1 + 1.2 - * tlsInt.h: - * tlsIO.c: This also accepted patch for bug #53. - * tls.tcl: Patch available since June, now committed. - -2012-07-09 Andreas Kupries - - * configure.in: Bump to version 1.6.3. - * win/makefile.vc: - * configure: regen with ac-2.59 - - * tls.c (MiscObjCmd): Fixed non-static string array used in call - of Tcl_GetIndexFromObj(). Memory smash waiting to happen. Thanks - to Brian Griffin for alerting us all to the problem. - -2012-06-01 Andreas Kupries - - * tls.c: Applied Jeff's patch from - http://www.mail-archive.com/aolserver@listserv.aol.com/msg12356.html - - * configure.in: Bump to version 1.6.2. - * win/makefile.vc: - * configure: regen with ac-2.59 - -2010-08-11 Jeff Hobbs - - *** TLS 1.6.1 TAGGED *** - - * configure: regen with ac-2.59 - * win/makefile.vc, configure.in: bump version to 1.6.1 - * tclconfig/tcl.m4: updated to TEA 3.8 - - * tls.c (StatusObjCmd): memleak: free peer if loaded. [Bug 3041925] - -2010-07-27 Jeff Hobbs - - * tls.tcl (tls::socket): some socket implementations have a -type - support (e.g. for inet6). - -2009-04-23 Jeff Hobbs - - * tls.tcl (tls::initlib): add support for Windows starpack - operation that unbundles any constituent libraries. [AS Bug 82888] - -2008-06-18 Pat Thoyts - - * tests/ciphers.test: Fix for different openssl versions. - * win/makefile.vc: Updates to support tests. - * win/rules.vc: - * win/nmakehlp.c: - -2008-03-19 Jeff Hobbs - - *** TLS 1.6 TAGGED *** - - * Makefile.in (dist): update to include win/ and file.srl - - * win/makefile.vc: bump version to 1.6 - * configure.in: use -L and -R where necessary. [Bug 1742859] - - * aclocal.m4: improve --with-ssl-dir check. - - * tests/tlsIO.test (tlsIO-14.*): Add tls::unimport for symmetry - * tls.htm, tls.c (UnimportObjCmd): to tls::import. [Bug 1203273] - - * tls.c (Tls_Clean, ImportObjCmd): Fix cleanup mem leak [Bug 1414045] - Use better Eval APIs, cleaner Tcl_Obj-handling. - -2008-03-19 Pat Thoyts - - * win/Makefile.vc Updated the nmake build files with MSVC9 support - * win/rules.vc: and fixed to run the test-suite properly. - * win/nmakehlp.c: - * tls.tcl (tls::initlib): Corrected namespace handling. - * tls.c: Applied #1890223 to fix handshake on non-blocking sockets - -2008-03-17 Jeff Hobbs - - * tls.tcl (tls::initlib): load tls.tcl first and call - * Makefile.in (pkgIndex.tcl): tls::initlib to load library to - handle cwd changes. [Bug 1888113] - -2007-09-06 Pat Thoyts - - * tls.c: Silence 64 bit integer conversion warnings - * win/nmakehlp.c: Update build system to support AMD64 target - * win/makefile.vc: with MSVC8 - * win/rules.vc: - -2007-06-22 Jeff Hobbs - - * tlsIO.c (TlsInputProc, TlsOutputProc, TlsWatchProc): - * tls.c (VerifyCallback): add an state flag in the verify callback - that prevents possibly recursion (on 'update'). [Bug 1652380] - - * tests/ciphers.test: reworked to make test output cleaner to - understand missing ciphers (if any) - - * Makefile.in, tclconfig/tcl.m4: update to TEA 3.6 - * configure, configure.in: using autoconf-2.59 - -2007-02-28 Pat Thoyts - - * win/makefile.vc: Rebase the DLL sensibly. Additional libs for - static link of openssl. - * tls.tcl: bug #1579837 - TIP 278 bug (possibly) - fixed. - -2006-03-30 Pat Thoyts - - * tclconfig/*: Updated to TEA 3.5 in response to bug 1460491 - * configure*: Regenerated configure. - -2005-02-08 Jeff Hobbs - - * Makefile.in, tclconfig/tcl.m4: update to TEA 3.2 - * configure, configure.in: using autoconf-2.59 - -2004-12-23 Pat Thoyts - - * Makefile.in: Removed spurious copying of tls.tcl into the - build directory. - -2004-12-22 Pat Thoyts - - * configure.in: Incremented minor version to 1.5.1 - * configure: - -2004-12-17 Pat Thoyts - - * win/makefile.vc: Added the MSVC build system (from the Tcl - * win/rules.vc: sampleextension). - * win/nmakehlp.c: - * win/tls.rc Added Windows resource file. - - * tls.tcl: From patch #948155, added support for - alternate socket commands. - * tls.c: Quieten some MSVC warnings. Prefer ckalloc - over Tcl_Alloc. (David Graveraux). - -2004-06-29 Pat Thoyts - - * tls.c: Fixup to build against tcl 8.3.3. Handle - * tlsIO.c: 8.4 constification. - - * tlsInt.h: Added headers required with MSVC on Win32. - * tlsX509.c: undef min and max if defined (win32). - - * Makefile.in: Fixed to build on win32 using msys with - * aclocal.m4: MSVC. Also fixed the test target. - * configure.in: - * configure: Regenerated. - * tclconfig/tcl.m4: Updated to most recent version. - -2004-03-23 Dan Razzell - * tls.c: - * tlsBIO.c: - * tlsIO.c: - * tlsInt.h: Fixed type match warnings. - -2004-03-19 Jeff Hobbs - - * tls.c (Tls_Init): replaced older TEA config with newer - * config/* (removed): - * pkgIndex.tcl.in, strncasecmp.c (removed): - * Makefile.in, aclocal.m4, configure, configure.in: - * tclconfig/README.txt, tclconfig/install-sh, tclconfig/tcl.m4: - -2004-03-17 Dan Razzell - - * tlsX509.c: Add support for long serial numbers per RFC 3280. - Format is now hexadecimal. - [Request #915313] - Correctly convert certificate Distinguished Names - to Tcl string representation. Eliminates use of - deprecated OpenSSL function. Format is now compliant - with RFC 2253. [Request #915315] - -2004-02-17 Dan Razzell - - TLS 1.5.0 RELEASE - -2004-02-12 Dan Razzell - - * tls.c: Allow verify callback to return empty result. - * tls.htm: Document callback behaviors. - -2004-02-11 Dan Razzell - - * tests/tlsIO.test: - * remote.tcl: Complete private key name changes from 2001-06-21. - -2004-02-03 Dan Razzell - - * Makefile.in: Removed circular dependency. - * tlsInt.h: Make function declarations explicit. - * tls.c: Fix type match and unused variable warnings. - * tlsBIO.c: Fix type match warning. - -2003-12-15 Dan Razzell - - * pkgIndex.tcl.in: - * tls.htm: - * tests/tlsIO.test: updated version to 1.5. - -2003-10-07 Dan Razzell - - * tests/ciphers.test: updated list of tested ciphers to correspond - * with those available from OpenSSL. [Request #811981] - -2003-10-07 Dan Razzell - - * tls.c: added CONST with intent similar to those from 2002-02-04. - [Request #811911] - -2003-07-07 Jeff Hobbs - - * tls.c (Tls_Init): added tls::misc command provided by - * tlsX509.c: Wojciech Kocjan (wojciech kocjan.org) - * tests/keytest1.tcl: to expose more low-level SSL commands - * tests/keytest2.tcl: - -2003-05-15 Dan Razzell - - * tls.tcl: - * tlsInt.h: - * tls.c: add support for binding a password callback to the socket. - Now each socket can have its own command and password callbacks instead - of being forced to have all password management pass through a common - procedure. The common password procedure is retained for compatibility - but its use should be DEPRECATED. - Add version command to return OpenSSL version string. - Remove unstable workarounds needed for verify in obsolete versions of - OpenSSL. - Fix memory leak. [Request #640660] - More casts to eliminate compiler warnings. - - * tls.htm: document password callback. - Correct technical and typographic errors. - - * README.txt: identify versions of OpenSSL which fix known problems. - General warning of security problems in older versions of OpenSSL. - -2002-02-04 Jeff Hobbs - - * tls.htm: - * tls.c: added support for local certificate status check, as well - as returning the # of bits in the session key. [Patch #505698] (rose) - - * tls.c: - * tlsIO.c: - * tlsBIO.c: added CONSTs to satisfy Tcl 8.4 sources. This may - give warnings when compiled against 8.3, but they can be ignored. - - * tests/simpleClient.tcl: - * tests/simpleServer.tcl: point to updated client/server key files. - - * tests/tlsIO.test: - * tests/ciphers.test: updated to load tls from build dir. - - * Makefile.in: removed strncasecmp from default object set. This - is only needed on the Mac, and Tcl stubs provides it. - - * configure: regen'ed. - * configure.in: updated to 1.5.0 for next release. - Changed default openssl location to /usr/local/ssl (this is where - openssl 0.9.6c installs by default). - Changed to use public Tcl headers (private not needed). - -2001-06-21 Jeff Hobbs - - TLS 1.4.1 RELEASE - - * configure: added configure to CVS - * configure.in: moved to patchlevel 1.4.1 - - * Makefile.in: corrected 'dist' target - - * tests/certs/file.srl: - * tests/certs/ca.pem: - * tests/certs/client.key: - * tests/certs/client.pem: - * tests/certs/client.req: - * tests/certs/privkey.pem: - * tests/certs/server.key: - * tests/certs/server.pem: - * tests/certs/server.req: - * tests/certs/cacert.pem: replaced by new ca.pem - * tests/certs/skey.pem: replaced by new server.key - * tests/certs/ckey.pem: replaced by new client.key - * tests/certs/README.txt: new set of test certificates with some - README info on their generation. - - * tests/ciphers.test: updated ciphers expected with default - openssl build. - - * tests/tclIO.test: updated to use new names for certs/keys. - -2001-03-14 Jeff Hobbs - - * tls.c (Tls_Init): add do/while for random number initialization - to work around some OSes quirks. (Ralph.Billes@teltech.com.au) - -2000-09-07 Jeff Hobbs - - * tlsIO.c (Tls_ChannelType): set typeName field of channel type to - "tls" (this got lost in move to dynamic version compatability - checking). - -2000-08-23 Jeff Hobbs - - TLS 1.4 RELEASED - - * Makefile.in (dist): create dist target for archive distributions - - * tests/tlsIO.test (tlsIO-8.1): added a delay on the accept close - to make the test work with OpenSSL on Windows (doesn't affect - other builds). - - * tls.htm: updated with notes for 1.4. - -2000-08-21 Jeff Hobbs - - * tests/tlsIO.test: require at least tls1.4 in test suite. - -2000-08-18 Jeff Hobbs - - * tls.c (Tls_Init): added call to RAND_seed to seed the SSL random - number generator. Without this, OpenSSL 0.9.5 chokes, and in any - case it is a big security hole to do without it. - - * configure.in (OPENSSL): added NO_IDEA and NO_RC5 defines by - default when compiling with OpenSSL. - - * tlsInt.h: added err.h include - - * tlsBIO.c: - * tlsIO.c: corrected pedantic cast errors. - -2000-08-16 Jeff Hobbs - - * tests/ciphers.test: improved ability to change constraint - setting for whether user compiled against RSA or OpenSSL libs. - - * tls.c (Tls_Init): corrected interpretation of version number - (patchlevel and release/serial were swapped). - -2000-08-15 Jeff Hobbs - - * README.txt: added notes about need to use 8.2.0+. - - * tlsInt.h: - * tls.c: - * tlsIO.c: corrected structure initialization to work when - compiling with 8.2. Now compiles with 8.2+ and tested to work - with 8.2+ and dynamically adjust to the version of Tcl it was - loaded into. TLS will fail the test suite with Tcl 8.2-8.3.1. - - * tests/all.tcl: added catch around ::tcltest::normalizePath - because it doesn't exist in pre-8.3 tcltest. - - * tests/simpleClient.tcl: - * tests/simpleServer.tcl: added simple client/server test scripts - that use test certs and can do simple stress tests. - -2000-08-14 Jeff Hobbs - - * tlsInt.h: - * tlsIO.c: - * tlsBIO.c: - * tls.c: changed around to only working with 8.2.0+ (8.3.2+ - preferred), with runtime checks for pre- and post-io-rewrite. - - * tls.c (Tls_Init): changed it to require 8.3.2 when Tcl_InitStubs - was called because we don't want people using TLS with the - original stacked channel implementation. - -2000-07-26 Jeff Hobbs - - * merged all changes from tls-1-3-io-rewrite back into main branch - - * tests/tlsIO.test: updated comments, fixed a pcCrash case that - was due to debug assertion in Windows SSL. - - * tls.c (ImportObjCmd): removed unnecessary use of 'bio' arg. - (Tls_Init): check return value of SSL_library_init. Also lots of - whitespace cleanup (more like Tcl Eng style guide), but not all - code was cleaned up. - - * tlsBIO.c: minor whitespace cleanup - - * tlsIO.c: minor whitespace cleanup. - (TlsInputProc, TlsOutputProc): Added ERR_clear_error before calls - to BIO_read or BIO_write, because we could otherwise end up - pulling an error off the stack that didn't belong to us. Also - cleanup up excessive use of gotos. - -2000-07-20 Jeff Hobbs - - * tests/tlsIO.test: corrected various tests to be correct for TLS - stacked channels (as opposed to the standard sockets the test - suite was adopted from). Key differences are that TLS cannot - operate in one process without all channels being non-blocking, or - the handshake will block, and handshaking must be forced in some - cases. Also, handshakes don't seem to complete unless the client - has placed at least one byte for the server to read in the channel. - - * tests/remote.tcl: corrected the finding of tests certificates - - * tlsIO.c (TlsCloseProc): removed deleting of timer handler as - that is handled by Tls_Clean. - - * tls.tcl (tls::_accept): corrected the internal _accept to - trickle callback errors to the user. - - * Makefile.in: made the install-binaries target regenerate the - pkgIndex.tcl correctly. The test target probably shouldn't screw - it up, but this is to be on the safe side. - -2000-07-17 Jeff Hobbs - - * pkgIndex.tcl.in: - * configure.in: updated version to 1.4 - -2000-07-13 Jeff Hobbs - - * tests/tlsIO.test: enabled tests 2.10, 7.[1245] (there is no 3), - which now pass. Added some comments to other failing tests. - -2000-07-11 Jeff Hobbs - - * tlsIO.c: changed all the channel procs to start with Tls* for - better parity when comparing with Transform channel procs. - Rewrote TlsWatchProc, added TlsNotifyProc according to the new - channel design, which also leaves TlsChannelHandler unused. - - * tlsBIO.c (BioCtrl): changed BIO_CTRL_FLUSH case to use - Tcl_WriteRaw instead of Tcl_Flush (to operate on correct channel - in the stack instead of starting at the top again). Would - otherwise cause a recursive stack bomb when implicit handshaking - took effect. - - * tests/tlsIO.test: removed changes made to test suite (all tests - that ran before now pass correctly), and changed some accept proc - args to reflect that a sock is an arg, not a file. - -2000-07-10 Jeff Hobbs - - * tlsBIO.c (BioWrite, BioRead): changed Tcl_Read/Write to - Tcl_ReadRaw/TclWriteRaw. - - * tls.c: added use of Tcl_GetTopChannel after Tcl_GetChannel and - got return value from Tcl_StackChannel. - - * tests/tlsIO.test: added some handshaking that shouldn't be - necessary, but we crash otherwise (needs more testing). - - * tlsIO.c: added support for "corrected" stacked channels. All - the above channels are in TCL_CHANNEL_VERSION_2 #ifdefs. - -2000-06-05 Scott Stanton - - * Makefile.in: Fixed broken test target. - - * tlsInt.h: - * tls.c: Cleaned up declarations of Tls_Clean to avoid errors on - Windows (lint). - -2000-06-05 Brent Welch - - * tls.c, tlsIO.c: Split Tls_Free into Tls_Clean, which does - the SSL cleanup, and the Tcl_Free call. It is important to shutdown - the SSL state "synchronously" during a stacked flush. - -2000-06-01 Scott Stanton - - * tlsIO.c: Restored call to Tcl_NotifyChannel from ChannelHandler - to ensure that events propagate from the lower driver. This may - result in an infinite loop in some cases, so this is not a total - fix. This may be sufficient for now, however. [Bug: 5623] - -2000-06-01 Scott Stanton - - * tlsIO.c: Restore the previous version. Fixed the CloseProc so - it unregisters the channel handler on the superceded channel - instead of the upper channel. Also removed the call to - Tcl_NotifyChannel in the ChannelHandler because this will result - in an infinite loop if data is ever buffered in the BIO - structure. [Bug: 5623] - -2000-05-31 Brent Welch - - * tls.c: Change the ChannelHandler to be registered on the main - channel as oppsed to the "parent", or superceeded, channel. This - is because the socket driver notifies the main channel, and there - are times with the main channel gets closed, but the superceded - one is not yet closed. If the channel handler gets triggered in - this half-open state it is associated with the superceeded - channedl, but uses its private pointer to the main channel, which - is mostly destroyed. Eliminated the redundant call to - Tcl_NotifyChannel from TlsWatchProc. [Bug: 5623] diff --git a/tls/Makefile.in b/tls/Makefile.in deleted file mode 100644 index 2d5dce9..0000000 --- a/tls/Makefile.in +++ /dev/null @@ -1,469 +0,0 @@ -# Makefile.in -- -# -# This file is a Makefile for Sample TEA Extension. If it has the name -# "Makefile.in" then it is a template for a Makefile; to generate the -# actual Makefile, run "./configure", which is a configuration script -# generated by the "autoconf" program (constructs like "@foo@" will get -# replaced in the actual Makefile. -# -# Copyright (c) 1999 Scriptics Corporation. -# Copyright (c) 2002-2005 ActiveState Corporation. -# -# See the file "license.terms" for information on usage and redistribution -# of this file, and for a DISCLAIMER OF ALL WARRANTIES. - -#======================================================================== -# Add additional lines to handle any additional AC_SUBST cases that -# have been added in a customized configure script. -#======================================================================== - -#SAMPLE_NEW_VAR = @SAMPLE_NEW_VAR@ - -#======================================================================== -# Nothing of the variables below this line should need to be changed. -# Please check the TARGETS section below to make sure the make targets -# are correct. -#======================================================================== - -#======================================================================== -# The names of the source files is defined in the configure script. -# The object files are used for linking into the final library. -# This will be used when a dist target is added to the Makefile. -# It is not important to specify the directory, as long as it is the -# $(srcdir) or in the generic, win or unix subdirectory. -#======================================================================== - -PKG_SOURCES = @PKG_SOURCES@ -PKG_OBJECTS = @PKG_OBJECTS@ - -PKG_STUB_SOURCES = @PKG_STUB_SOURCES@ -PKG_STUB_OBJECTS = @PKG_STUB_OBJECTS@ - -#======================================================================== -# PKG_TCL_SOURCES identifies Tcl runtime files that are associated with -# this package that need to be installed, if any. -#======================================================================== - -PKG_TCL_SOURCES = @PKG_TCL_SOURCES@ - -#======================================================================== -# This is a list of public header files to be installed, if any. -#======================================================================== - -PKG_HEADERS = @PKG_HEADERS@ - -#======================================================================== -# Variables and AC_SUBST cases added for tls. -#======================================================================== - -SSL_DIR = @SSL_DIR@ -SSL_LIB_DIR = @SSL_LIB_DIR@ -SSL_INCLUDE_DIR = @SSL_INCLUDE_DIR@ -SSL_INCLUDE_DIR_NATIVE = @SSL_INCLUDE_DIR_NATIVE@ -SSL_INCLUDES = -I$(SSL_INCLUDE_DIR_NATIVE) - -#======================================================================== -# "PKG_LIB_FILE" refers to the library (dynamic or static as per -# configuration options) composed of the named objects. -#======================================================================== - -PKG_LIB_FILE = @PKG_LIB_FILE@ -PKG_STUB_LIB_FILE = @PKG_STUB_LIB_FILE@ - -lib_BINARIES = $(PKG_LIB_FILE) -BINARIES = $(lib_BINARIES) - -SHELL = @SHELL@ - -srcdir = @srcdir@ -prefix = @prefix@ -exec_prefix = @exec_prefix@ - -bindir = @bindir@ -libdir = @libdir@ -includedir = @includedir@ -datarootdir = @datarootdir@ -datadir = @datadir@ -mandir = @mandir@ - -DESTDIR = - -PKG_DIR = $(PACKAGE_NAME)$(PACKAGE_VERSION) -pkgdatadir = $(datadir)/$(PKG_DIR) -pkglibdir = $(libdir)/$(PKG_DIR) -pkgincludedir = $(includedir)/$(PKG_DIR) - -top_builddir = @abs_top_builddir@ - -INSTALL_OPTIONS = -INSTALL = @INSTALL@ $(INSTALL_OPTIONS) -INSTALL_DATA_DIR = ${INSTALL} -d -m 755 -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_LIBRARY = ${INSTALL_DATA} - -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -CC = @CC@ -CFLAGS_DEFAULT = @CFLAGS_DEFAULT@ -CFLAGS_WARNING = @CFLAGS_WARNING@ -EXEEXT = @EXEEXT@ -LDFLAGS_DEFAULT = @LDFLAGS_DEFAULT@ -MAKE_LIB = @MAKE_LIB@ -MAKE_SHARED_LIB = @MAKE_SHARED_LIB@ -MAKE_STATIC_LIB = @MAKE_STATIC_LIB@ -MAKE_STUB_LIB = @MAKE_STUB_LIB@ -OBJEXT = @OBJEXT@ -RANLIB = @RANLIB@ -RANLIB_STUB = @RANLIB_STUB@ -SHLIB_CFLAGS = @SHLIB_CFLAGS@ -SHLIB_LD = @SHLIB_LD@ -SHLIB_LD_LIBS = @SHLIB_LD_LIBS@ -STLIB_LD = @STLIB_LD@ -#TCL_DEFS = @TCL_DEFS@ -TCL_BIN_DIR = @TCL_BIN_DIR@ -TCL_SRC_DIR = @TCL_SRC_DIR@ -#TK_BIN_DIR = @TK_BIN_DIR@ -#TK_SRC_DIR = @TK_SRC_DIR@ - -# Not used, but retained for reference of what libs Tcl required -#TCL_LIBS = @TCL_LIBS@ - -#======================================================================== -# TCLLIBPATH seeds the auto_path in Tcl's init.tcl so we can test our -# package without installing. The other environment variables allow us -# to test against an uninstalled Tcl. Add special env vars that you -# require for testing here (like TCLX_LIBRARY). -#======================================================================== - -EXTRA_PATH = $(top_builddir):$(TCL_BIN_DIR) -#EXTRA_PATH = $(top_builddir):$(TCL_BIN_DIR):$(TK_BIN_DIR) -TCLLIBPATH = $(top_builddir) -TCLSH_ENV = TCL_LIBRARY=`@CYGPATH@ $(TCL_SRC_DIR)/library` -PKG_ENV = @LD_LIBRARY_PATH_VAR@="$(EXTRA_PATH):$(@LD_LIBRARY_PATH_VAR@)" \ - PATH="$(EXTRA_PATH):$(PATH)" \ - TCLLIBPATH="$(TCLLIBPATH)" - -TCLSH_PROG = @TCLSH_PROG@ -TCLSH = $(TCLSH_ENV) $(PKG_ENV) $(TCLSH_PROG) - -#WISH_ENV = TK_LIBRARY=`@CYGPATH@ $(TK_SRC_DIR)/library` -#WISH_PROG = @WISH_PROG@ -#WISH = $(TCLSH_ENV) $(WISH_ENV) $(PKG_ENV) $(WISH_PROG) - -SHARED_BUILD = @SHARED_BUILD@ - -INCLUDES = @PKG_INCLUDES@ @TCL_INCLUDES@ -#INCLUDES = @PKG_INCLUDES@ @TCL_INCLUDES@ @TK_INCLUDES@ @TK_XINCLUDES@ - -PKG_CFLAGS = @PKG_CFLAGS@ - -# TCL_DEFS is not strictly need here, but if you remove it, then you -# must make sure that configure.ac checks for the necessary components -# that your library may use. TCL_DEFS can actually be a problem if -# you do not compile with a similar machine setup as the Tcl core was -# compiled with. -#DEFS = $(TCL_DEFS) @DEFS@ $(PKG_CFLAGS) -DEFS = @DEFS@ $(PKG_CFLAGS) - -# Move pkgIndex.tcl to 'BINARIES' var if it is generated in the Makefile -CONFIG_CLEAN_FILES = Makefile pkgIndex.tcl -CLEANFILES = @CLEANFILES@ - -CPPFLAGS = @CPPFLAGS@ -LIBS = @PKG_LIBS@ @LIBS@ -AR = @AR@ -CFLAGS = @CFLAGS@ -COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) \ - $(CFLAGS_DEFAULT) $(CFLAGS_WARNING) $(SHLIB_CFLAGS) $(CFLAGS) - -GDB = gdb -VALGRIND = valgrind -VALGRINDARGS = --tool=memcheck --num-callers=8 --leak-resolution=high \ - --leak-check=yes --show-reachable=yes -v - -.SUFFIXES: .c .$(OBJEXT) - -#======================================================================== -# Start of user-definable TARGETS section -#======================================================================== - -#======================================================================== -# TEA TARGETS. Please note that the "libraries:" target refers to platform -# independent files, and the "binaries:" target includes executable programs and -# platform-dependent libraries. Modify these targets so that they install -# the various pieces of your package. The make and install rules -# for the BINARIES that you specified above have already been done. -#======================================================================== - -all: binaries libraries #doc - -#======================================================================== -# The binaries target builds executable programs, Windows .dll's, unix -# shared/static libraries, and any other platform-dependent files. -# The list of targets to build for "binaries:" is specified at the top -# of the Makefile, in the "BINARIES" variable. -#======================================================================== - -binaries: $(BINARIES) - -libraries: - -#======================================================================== -# Your doc target should differentiate from doc builds (by the developer) -# and doc installs (see install-doc), which just install the docs on the -# end user machine when building from source. -#======================================================================== - -doc: - @echo "If you have documentation to create, place the commands to" - @echo "build the docs in the 'doc:' target. For example:" - @echo " xml2nroff sample.xml > sample.n" - @echo " xml2html sample.xml > sample.html" - -install: all install-binaries install-libraries #install-doc - -install-binaries: binaries install-lib-binaries install-bin-binaries - -#======================================================================== -# This rule installs platform-independent files, such as header files. -# The list=...; for p in $$list handles the empty list case x-platform. -#======================================================================== - -install-libraries: libraries - @$(INSTALL_DATA_DIR) $(DESTDIR)$(includedir) - @echo "Installing header files in $(DESTDIR)$(includedir)" - @list='$(PKG_HEADERS)'; for i in $$list; do \ - echo "Installing $(srcdir)/$$i" ; \ - $(INSTALL_DATA) $(srcdir)/$$i $(DESTDIR)$(includedir) ; \ - done; - -#======================================================================== -# Install documentation. Unix manpages should go in the $(mandir) -# directory. -#======================================================================== - -install-doc: doc - @$(INSTALL_DATA_DIR) $(DESTDIR)$(mandir)/mann - @echo "Installing documentation in $(DESTDIR)$(mandir)" - @list='$(srcdir)/doc/*.n'; for i in $$list; do \ - echo "Installing $$i"; \ - $(INSTALL_DATA) $$i $(DESTDIR)$(mandir)/mann ; \ - done - -test: binaries libraries - $(TCLSH) `@CYGPATH@ $(srcdir)/tests/all.tcl` $(TESTFLAGS) \ - -load "package ifneeded $(PACKAGE_NAME) $(PACKAGE_VERSION) \ - [list load `@CYGPATH@ $(PKG_LIB_FILE)` $(PACKAGE_NAME)]" - -shell: binaries libraries - @$(TCLSH) $(SCRIPT) - -gdb: - $(TCLSH_ENV) $(PKG_ENV) $(GDB) $(TCLSH_PROG) $(SCRIPT) - -gdb-test: binaries libraries - $(TCLSH_ENV) $(PKG_ENV) $(GDB) \ - --args $(TCLSH_PROG) `@CYGPATH@ $(srcdir)/tests/all.tcl` \ - $(TESTFLAGS) -singleproc 1 \ - -load "package ifneeded $(PACKAGE_NAME) $(PACKAGE_VERSION) \ - [list load `@CYGPATH@ $(PKG_LIB_FILE)` $(PACKAGE_NAME)]" - -valgrind: binaries libraries - $(TCLSH_ENV) $(PKG_ENV) $(VALGRIND) $(VALGRINDARGS) $(TCLSH_PROG) \ - `@CYGPATH@ $(srcdir)/tests/all.tcl` $(TESTFLAGS) - -valgrindshell: binaries libraries - $(TCLSH_ENV) $(PKG_ENV) $(VALGRIND) $(VALGRINDARGS) $(TCLSH_PROG) $(SCRIPT) - -depend: - -#======================================================================== -# $(PKG_LIB_FILE) should be listed as part of the BINARIES variable -# mentioned above. That will ensure that this target is built when you -# run "make binaries". -# -# The $(PKG_OBJECTS) objects are created and linked into the final -# library. In most cases these object files will correspond to the -# source files above. -#======================================================================== - -$(PKG_LIB_FILE): $(PKG_OBJECTS) - -rm -f $(PKG_LIB_FILE) - ${MAKE_LIB} - $(RANLIB) $(PKG_LIB_FILE) - -$(PKG_STUB_LIB_FILE): $(PKG_STUB_OBJECTS) - -rm -f $(PKG_STUB_LIB_FILE) - ${MAKE_STUB_LIB} - $(RANLIB_STUB) $(PKG_STUB_LIB_FILE) - -#======================================================================== -# We need to enumerate the list of .c to .o lines here. -# -# In the following lines, $(srcdir) refers to the toplevel directory -# containing your extension. If your sources are in a subdirectory, -# you will have to modify the paths to reflect this: -# -# sample.$(OBJEXT): $(srcdir)/generic/sample.c -# $(COMPILE) -c `@CYGPATH@ $(srcdir)/generic/sample.c` -o $@ -# -# Setting the VPATH variable to a list of paths will cause the makefile -# to look into these paths when resolving .c to .obj dependencies. -# As necessary, add $(srcdir):$(srcdir)/compat:.... -#======================================================================== - -VPATH = $(srcdir):$(srcdir)/generic:$(srcdir)/unix:$(srcdir)/win:$(srcdir)/macosx - -.c.@OBJEXT@: - $(COMPILE) -c `@CYGPATH@ $<` -o $@ - -#======================================================================== -# Distribution creation -# You may need to tweak this target to make it work correctly. -#======================================================================== - -#COMPRESS = tar cvf $(PKG_DIR).tar $(PKG_DIR); compress $(PKG_DIR).tar -COMPRESS = tar zcvf $(PKG_DIR).tar.gz $(PKG_DIR) -DIST_ROOT = /tmp/dist -DIST_DIR = $(DIST_ROOT)/$(PKG_DIR) - -DIST_INSTALL_DATA = CPPROG='cp -p' $(INSTALL) -m 644 -DIST_INSTALL_SCRIPT = CPPROG='cp -p' $(INSTALL) -m 755 - -dist-clean: - rm -rf $(DIST_DIR) $(DIST_ROOT)/$(PKG_DIR).tar.* - -dist: dist-clean - $(INSTALL_DATA_DIR) $(DIST_DIR) - - # TEA files - $(DIST_INSTALL_DATA) $(srcdir)/Makefile.in \ - $(srcdir)/aclocal.m4 $(srcdir)/configure.ac \ - $(DIST_DIR)/ - $(DIST_INSTALL_SCRIPT) $(srcdir)/configure $(DIST_DIR)/ - - $(INSTALL_DATA_DIR) $(DIST_DIR)/tclconfig - $(DIST_INSTALL_DATA) $(srcdir)/tclconfig/README.txt \ - $(srcdir)/tclconfig/tcl.m4 $(srcdir)/tclconfig/install-sh \ - $(DIST_DIR)/tclconfig/ - - # Extension files - $(DIST_INSTALL_DATA) \ - $(srcdir)/ChangeLog \ - $(srcdir)/README.sha \ - $(srcdir)/license.terms \ - $(srcdir)/README \ - $(srcdir)/pkgIndex.tcl.in \ - $(DIST_DIR)/ - - list='demos doc generic library mac tests unix win'; \ - for p in $$list; do \ - if test -d $(srcdir)/$$p ; then \ - $(INSTALL_DATA_DIR) $(DIST_DIR)/$$p; \ - $(DIST_INSTALL_DATA) $(srcdir)/$$p/* $(DIST_DIR)/$$p/; \ - fi; \ - done - - (cd $(DIST_ROOT); $(COMPRESS);) - -#======================================================================== -# End of user-definable section -#======================================================================== - -#======================================================================== -# Don't modify the file to clean here. Instead, set the "CLEANFILES" -# variable in configure.ac -#======================================================================== - -clean: - -test -z "$(BINARIES)" || rm -f $(BINARIES) - -rm -f *.$(OBJEXT) core *.core - -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) - -distclean: clean - -rm -f *.tab.c - -rm -f $(CONFIG_CLEAN_FILES) - -rm -f config.cache config.log config.status - -#======================================================================== -# Install binary object libraries. On Windows this includes both .dll and -# .lib files. Because the .lib files are not explicitly listed anywhere, -# we need to deduce their existence from the .dll file of the same name. -# Library files go into the lib directory. -# In addition, this will generate the pkgIndex.tcl -# file in the install location (assuming it can find a usable tclsh shell) -# -# You should not have to modify this target. -#======================================================================== - -install-lib-binaries: binaries - @$(INSTALL_DATA_DIR) $(DESTDIR)$(pkglibdir) - @list='$(lib_BINARIES)'; for p in $$list; do \ - if test -f $$p; then \ - echo " $(INSTALL_LIBRARY) $$p $(DESTDIR)$(pkglibdir)/$$p"; \ - $(INSTALL_LIBRARY) $$p $(DESTDIR)$(pkglibdir)/$$p; \ - ext=`echo $$p|sed -e "s/.*\.//"`; \ - if test "x$$ext" = "xdll"; then \ - lib=`basename $$p|sed -e 's/.[^.]*$$//'`.lib; \ - if test -f $$lib; then \ - echo " $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib"; \ - $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib; \ - fi; \ - fi; \ - fi; \ - done - @list='$(PKG_TCL_SOURCES)'; for p in $$list; do \ - if test -f $(srcdir)/$$p; then \ - destp=`basename $$p`; \ - echo " Install $$destp $(DESTDIR)$(pkglibdir)/$$destp"; \ - $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkglibdir)/$$destp; \ - fi; \ - done - @if test "x$(SHARED_BUILD)" = "x1"; then \ - echo " Install pkgIndex.tcl $(DESTDIR)$(pkglibdir)"; \ - $(INSTALL_DATA) pkgIndex.tcl $(DESTDIR)$(pkglibdir); \ - fi - $(INSTALL_DATA) tlsConfig.sh $(DESTDIR)$(libdir) - -#======================================================================== -# Install binary executables (e.g. .exe files and dependent .dll files) -# This is for files that must go in the bin directory (located next to -# wish and tclsh), like dependent .dll files on Windows. -# -# You should not have to modify this target, except to define bin_BINARIES -# above if necessary. -#======================================================================== - -install-bin-binaries: binaries - @$(INSTALL_DATA_DIR) $(DESTDIR)$(bindir) - @list='$(bin_BINARIES)'; for p in $$list; do \ - if test -f $$p; then \ - echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p"; \ - $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p; \ - fi; \ - done - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status - -uninstall-binaries: - list='$(lib_BINARIES)'; for p in $$list; do \ - rm -f $(DESTDIR)$(pkglibdir)/$$p; \ - done - list='$(PKG_TCL_SOURCES)'; for p in $$list; do \ - p=`basename $$p`; \ - rm -f $(DESTDIR)$(pkglibdir)/$$p; \ - done - list='$(bin_BINARIES)'; for p in $$list; do \ - rm -f $(DESTDIR)$(bindir)/$$p; \ - done - -.PHONY: all binaries clean depend distclean doc install libraries test -.PHONY: gdb gdb-test valgrind valgrindshell - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/tls/README.txt b/tls/README.txt deleted file mode 100644 index 8471a1a..0000000 --- a/tls/README.txt +++ /dev/null @@ -1,35 +0,0 @@ -Original TLS Copyright (C) 1997-2000 Matt Newman -TLS 1.4.1 Copyright (C) 2000 Ajuba Solutions -TLS 1.6 Copyright (C) 2008 ActiveState Software Inc. - -$Header: /cvsroot/tls/tls/README.txt,v 1.7 2008/03/19 22:49:12 hobbs2 Exp $ - -TLS (aka SSL) Channel - can be layered on any bi-directional Tcl_Channel. - -Both client and server-side sockets are possible, and this code should work -on any platform as it uses a generic mechanism for layering on SSL and Tcl. - -Full filevent sematics should also be intact - see tests directory for -blocking and non-blocking examples. - -The current release is TLS 1.6, with binaries built against OpenSSL 0.9.8g. -For best security and function, always compile from source with the latest -official release of OpenSSL (http://www.openssl.org/). - -TLS requires Tcl 8.2.0+, with 8.3.2+ preferred. The stacked channel -implementation in Tcl was originally introduced in 8.2.0 (previously the -Trf patch) and rewritten for 8.3.2+ due to inherent limitations in the -earlier implementation. TLS should compile with any stubs-capable Tcl -interpreter, but will require 8.2+ when loaded. There are known -limitations in the 8.2.0-8.3.1 stacked channel implementation, so it is -encouraged that people use TLS with an 8.3.2+ Tcl interpreter. These -modifications are by Jeff Hobbs. - -Non-exclusive credits for TLS are: - Original work: Matt Newman @ Novadigm - Updates: Jeff Hobbs @ ActiveState - Tcl Channel mechanism: Andreas Kupries - Impetus/Related work: tclSSL (Colin McCormack, Shared Technology) - SSLtcl (Peter Antman) - -This code is licensed under the same terms as the Tcl Core. diff --git a/tls/aclocal.m4 b/tls/aclocal.m4 deleted file mode 100644 index ff62b04..0000000 --- a/tls/aclocal.m4 +++ /dev/null @@ -1,168 +0,0 @@ -# -# Include the TEA standard macro set -# - -builtin(include,tclconfig/tcl.m4) - -# -# Add here whatever m4 macros you want to define for your package -# -#------------------------------------------------------------------------ -# TLS_SSL_DIR -- -# -# Locate the installed ssl files -# -# Arguments: -# None. -# -# Requires: -# CYGPATH must be set -# -# Results: -# -# Adds a --with-ssl-dir switch to configure. -# Result is cached. -# -# Substs the following vars: -# SSL_DIR -#------------------------------------------------------------------------ - -AC_DEFUN(TLS_CHECK_SSL, [ - - #-------------------------------------------------------------------- - # If the variable OPENSSL is set, we will build with the OpenSSL - # libraries. If it is not set, then we will use RSA BSAFE SSL-C - # libraries instead of the default OpenSSL libaries. - #-------------------------------------------------------------------- - - AC_ARG_ENABLE(bsafe, [ --enable-bsafe Use RSA BSAFE SSL-C libs. Default is to use OpenSSL libs], OPENSSL="", OPENSSL="1") - - #-------------------------------------------------------------------- - # Establish the location of the root directory for OpenSSL. - # If we're not using OpenSSL, set the root for BSAFE SSL-C. - # If we're using BSAFE, define the BSAFE compiler flag. - # The "FLAT_INC" flag is used in the BSAFE ssl.h header file and - # doesn't seem to be referenced anywhere else. - #-------------------------------------------------------------------- - if test -n "${OPENSSL}"; then - SSL_DIR='/usr /usr/local' - AC_DEFINE(NO_IDEA) - AC_DEFINE(NO_RC5) - else - SSL_DIR='/usr/sslc /usr/local/sslc' - AC_DEFINE(BSAFE) - AC_DEFINE(FLAT_INC) - fi - - AC_MSG_CHECKING([for SSL directory]) - - AC_ARG_WITH(ssl-dir, [ --with-ssl-dir=DIR SSL root directory], with_ssldir=${withval}) - - AC_CACHE_VAL(ac_cv_c_ssldir, [ - # Use the value from --with-ssl-dir, if it was given - if test x"${with_ssldir}" != x ; then - if test -d "${with_ssldir}" ; then - ac_cv_c_ssldir=${with_ssldir} - else - AC_MSG_ERROR([${with_ssldir} is not a valid directory]) - fi - else - list="`ls -d ${SSL_DIR} 2>/dev/null`" - for i in $list ; do - if test -d "$i" ; then - ac_cv_c_ssldir=$i - break - fi - done - fi - ]) - - # Print a message based on how we determined the include path - - if test x"${ac_cv_c_ssldir}" = x ; then - AC_MSG_ERROR([Could not find SSL directory. -Please specify its location with --with-ssl-dir]) - else - SSL_DIR=${ac_cv_c_ssldir} - AC_MSG_RESULT([${SSL_DIR}]) - fi - - - #-------------------------------------------------------------------- - # The OpenSSL and BSAFE SSL-C directory structures differ. - #-------------------------------------------------------------------- - - if test -n "${OPENSSL}"; then - SSL_LIB_DIR=${SSL_DIR}/lib - SSL_INCLUDE_DIR=${SSL_DIR}/include - if test ! -f "${SSL_INCLUDE_DIR}/openssl/opensslv.h"; then - AC_ERROR([bad ssl-dir: cannot find openssl/opensslv.h under ${SSL_INCLUDE_DIR}]) - fi - else - #-------------------------------------------------------------------- - # If we're using RSA BSAFE SSL-C, we need to establish what platform - # we're running on before we can figure out some paths. - # This step isn't necessary if we're using OpenSSL. - #-------------------------------------------------------------------- - - if test -z "${OPENSSL}"; then - AC_MSG_CHECKING([host type]) - case "`uname -s`" in - *win32* | *WIN32* | *CYGWIN_NT*|*CYGWIN_98*|*CYGWIN_95*) - PLATFORM=WIN32 - ;; - *SunOS*) - PLATFORM=SOLARIS - ;; - HP-UX) - PLATFORM=HPUX - ;; - *) - PLATFORM=LINUX - ;; - esac - AC_MSG_RESULT(${PLATFORM}) - fi - SSL_LIB_DIR=${SSL_DIR}/${PLATFORM}/library/lib - SSL_INCLUDE_DIR=${SSL_DIR}/${PLATFORM}/library/include - if test ! -f "${SSL_INCLUDE_DIR}/crypto.h"; then - AC_ERROR([bad ssl-dir: cannot find crypto.h under ${SSL_INCLUDE_DIR}]) - fi - fi - - AC_SUBST(SSL_DIR) - AC_SUBST(SSL_LIB_DIR) - AC_SUBST(SSL_INCLUDE_DIR) - - SSL_INCLUDE_DIR_NATIVE=\"`${CYGPATH} ${SSL_INCLUDE_DIR}`\" - SSL_LIB_DIR_NATIVE=\"`${CYGPATH} ${SSL_LIB_DIR}`\" - AC_SUBST(SSL_INCLUDE_DIR_NATIVE) - AC_SUBST(SSL_LIB_DIR_NATIVE) - - #-------------------------------------------------------------------- - # If OpenSSL was built with gcc then there may be some symbols that need - # resolving before we can load it into tclsh (__udivd3i on solaris. - # Let the user specify if we need to add libgcc to the link line to - # resolve these symbols. - # - # This doesn't seem to be necessary if the RSA BSAFE SSL-C libraries - # are used instead of OpenSSL. - #-------------------------------------------------------------------- - - if test -n "${OPENSSL}"; then - AC_MSG_CHECKING(if libgcc is needed to resolve openssl symbols) - - AC_ARG_WITH(gcclib, [ --with-gcclib link with libgcc to resolve symbols in a gcc-built openssl library], GCCLIB="-lgcc", GCCLIB="") - - if test "x${GCCLIB}" = "x" ; then - AC_MSG_RESULT(no) - else - AC_MSG_RESULT(yes) - AC_MSG_CHECKING(for gcc library location) - GCCPATH=`${CC} -print-libgcc-file-name | sed -e 's#[^/]*$##'` - GCCPATH="-L${GCCPATH}" - AC_MSG_RESULT(${GCCPATH}) - fi - fi - -]) diff --git a/tls/configure b/tls/configure deleted file mode 100755 index d99ea41..0000000 --- a/tls/configure +++ /dev/null @@ -1,9658 +0,0 @@ -#! /bin/sh -# Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.69 for tls 1.6.7. -# -# -# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. -# -# -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in #( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in #(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -# Use a proper internal environment variable to ensure we don't fall - # into an infinite loop, continuously re-executing ourselves. - if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then - _as_can_reexec=no; export _as_can_reexec; - # We cannot yet assume a decent shell, so we have to provide a -# neutralization value for shells without unset; and this also -# works around shells that cannot unset nonexistent variables. -# Preserve -v and -x to the replacement shell. -BASH_ENV=/dev/null -ENV=/dev/null -(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV -case $- in # (((( - *v*x* | *x*v* ) as_opts=-vx ;; - *v* ) as_opts=-v ;; - *x* ) as_opts=-x ;; - * ) as_opts= ;; -esac -exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} -# Admittedly, this is quite paranoid, since all the known shells bail -# out after a failed `exec'. -$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 -as_fn_exit 255 - fi - # We don't want this to propagate to other subprocesses. - { _as_can_reexec=; unset _as_can_reexec;} -if test "x$CONFIG_SHELL" = x; then - as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which - # is contrary to our usage. Disable this feature. - alias -g '\${1+\"\$@\"}'='\"\$@\"' - setopt NO_GLOB_SUBST -else - case \`(set -o) 2>/dev/null\` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi -" - as_required="as_fn_return () { (exit \$1); } -as_fn_success () { as_fn_return 0; } -as_fn_failure () { as_fn_return 1; } -as_fn_ret_success () { return 0; } -as_fn_ret_failure () { return 1; } - -exitcode=0 -as_fn_success || { exitcode=1; echo as_fn_success failed.; } -as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } -as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } -as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } -if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : - -else - exitcode=1; echo positional parameters were not saved. -fi -test x\$exitcode = x0 || exit 1 -test -x / || exit 1" - as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO - as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO - eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && - test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 -test \$(( 1 + 1 )) = 2 || exit 1" - if (eval "$as_required") 2>/dev/null; then : - as_have_required=yes -else - as_have_required=no -fi - if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : - -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -as_found=false -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - as_found=: - case $as_dir in #( - /*) - for as_base in sh bash ksh sh5; do - # Try only shells that exist, to save several forks. - as_shell=$as_dir/$as_base - if { test -f "$as_shell" || test -f "$as_shell.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : - CONFIG_SHELL=$as_shell as_have_required=yes - if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : - break 2 -fi -fi - done;; - esac - as_found=false -done -$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : - CONFIG_SHELL=$SHELL as_have_required=yes -fi; } -IFS=$as_save_IFS - - - if test "x$CONFIG_SHELL" != x; then : - export CONFIG_SHELL - # We cannot yet assume a decent shell, so we have to provide a -# neutralization value for shells without unset; and this also -# works around shells that cannot unset nonexistent variables. -# Preserve -v and -x to the replacement shell. -BASH_ENV=/dev/null -ENV=/dev/null -(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV -case $- in # (((( - *v*x* | *x*v* ) as_opts=-vx ;; - *v* ) as_opts=-v ;; - *x* ) as_opts=-x ;; - * ) as_opts= ;; -esac -exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} -# Admittedly, this is quite paranoid, since all the known shells bail -# out after a failed `exec'. -$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 -exit 255 -fi - - if test x$as_have_required = xno; then : - $as_echo "$0: This script requires a shell more modern than all" - $as_echo "$0: the shells that I found on your system." - if test x${ZSH_VERSION+set} = xset ; then - $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" - $as_echo "$0: be upgraded to zsh 4.3.4 or later." - else - $as_echo "$0: Please tell bug-autoconf@gnu.org about your system, -$0: including any error possibly output before this -$0: message. Then install a modern shell, or manually run -$0: the script under such a shell if you do have one." - fi - exit 1 -fi -fi -fi -SHELL=${CONFIG_SHELL-/bin/sh} -export SHELL -# Unset more variables known to interfere with behavior of common tools. -CLICOLOR_FORCE= GREP_OPTIONS= -unset CLICOLOR_FORCE GREP_OPTIONS - -## --------------------- ## -## M4sh Shell Functions. ## -## --------------------- ## -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} # as_fn_mkdir_p - -# as_fn_executable_p FILE -# ----------------------- -# Test if FILE is an executable regular file. -as_fn_executable_p () -{ - test -f "$1" && test -x "$1" -} # as_fn_executable_p -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -# as_fn_error STATUS ERROR [LINENO LOG_FD] -# ---------------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} # as_fn_error - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - - - as_lineno_1=$LINENO as_lineno_1a=$LINENO - as_lineno_2=$LINENO as_lineno_2a=$LINENO - eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && - test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { - # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } - - # If we had to re-execute with $CONFIG_SHELL, we're ensured to have - # already done that, so ensure we don't try to do so again and fall - # in an infinite loop. This has already happened in practice. - _as_can_reexec=no; export _as_can_reexec - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit -} - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -pR'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -pR' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -pR' - fi -else - as_ln_s='cp -pR' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -as_test_x='test -x' -as_executable_p=as_fn_executable_p - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -test -n "$DJDIR" || exec 7<&0 &1 - -# Name of the host. -# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, -# so uname gets run too. -ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - -# -# Initializations. -# -ac_default_prefix=/usr/local -ac_clean_files= -ac_config_libobj_dir=. -LIBOBJS= -cross_compiling=no -subdirs= -MFLAGS= -MAKEFLAGS= - -# Identity of this package. -PACKAGE_NAME='tls' -PACKAGE_TARNAME='tls' -PACKAGE_VERSION='1.6.7' -PACKAGE_STRING='tls 1.6.7' -PACKAGE_BUGREPORT='' -PACKAGE_URL='' - -# Factoring default headers for most tests. -ac_includes_default="\ -#include -#ifdef HAVE_SYS_TYPES_H -# include -#endif -#ifdef HAVE_SYS_STAT_H -# include -#endif -#ifdef STDC_HEADERS -# include -# include -#else -# ifdef HAVE_STDLIB_H -# include -# endif -#endif -#ifdef HAVE_STRING_H -# if !defined STDC_HEADERS && defined HAVE_MEMORY_H -# include -# endif -# include -#endif -#ifdef HAVE_STRINGS_H -# include -#endif -#ifdef HAVE_INTTYPES_H -# include -#endif -#ifdef HAVE_STDINT_H -# include -#endif -#ifdef HAVE_UNISTD_H -# include -#endif" - -ac_subst_vars='LTLIBOBJS -LIBOBJS -PATCHLEVEL -MINOR_VERSION -MAJOR_VERSION -tls_STUB_LIB_PATH -tls_BUILD_STUB_LIB_PATH -tls_STUB_LIB_SPEC -tls_BUILD_STUB_LIB_SPEC -tls_LIB_SPEC -tls_BUILD_LIB_SPEC -TCLSH_PROG -VC_MANIFEST_EMBED_EXE -VC_MANIFEST_EMBED_DLL -RANLIB_STUB -MAKE_STUB_LIB -MAKE_STATIC_LIB -MAKE_SHARED_LIB -MAKE_LIB -SSL_LIB_DIR_NATIVE -SSL_INCLUDE_DIR_NATIVE -SSL_INCLUDE_DIR -SSL_LIB_DIR -SSL_DIR -TCL_DBGX -LDFLAGS_DEFAULT -CFLAGS_DEFAULT -LD_LIBRARY_PATH_VAR -SHLIB_CFLAGS -SHLIB_LD_LIBS -SHLIB_LD -STLIB_LD -CFLAGS_WARNING -CFLAGS_OPTIMIZE -CFLAGS_DEBUG -RC -CELIB_DIR -AR -STUBS_BUILD -SHARED_BUILD -TCL_THREADS -TCL_INCLUDES -PKG_OBJECTS -PKG_SOURCES -EGREP -GREP -RANLIB -SET_MAKE -CPP -TCL_SHLIB_LD_LIBS -TCL_LD_FLAGS -TCL_EXTRA_CFLAGS -TCL_DEFS -TCL_LIBS -CLEANFILES -OBJEXT -ac_ct_CC -CPPFLAGS -LDFLAGS -CFLAGS -CC -TCL_STUB_LIB_SPEC -TCL_STUB_LIB_FLAG -TCL_STUB_LIB_FILE -TCL_LIB_SPEC -TCL_LIB_FLAG -TCL_LIB_FILE -TCL_SRC_DIR -TCL_BIN_DIR -TCL_PATCH_LEVEL -TCL_VERSION -INSTALL_LIBRARY -INSTALL_SCRIPT -INSTALL_PROGRAM -INSTALL_DATA -INSTALL_DATA_DIR -INSTALL -PKG_CFLAGS -PKG_LIBS -PKG_INCLUDES -PKG_HEADERS -PKG_TCL_SOURCES -PKG_STUB_OBJECTS -PKG_STUB_SOURCES -PKG_STUB_LIB_FILE -PKG_LIB_FILE -EXEEXT -CYGPATH -target_alias -host_alias -build_alias -LIBS -ECHO_T -ECHO_N -ECHO_C -DEFS -mandir -localedir -libdir -psdir -pdfdir -dvidir -htmldir -infodir -docdir -oldincludedir -includedir -localstatedir -sharedstatedir -sysconfdir -datadir -datarootdir -libexecdir -sbindir -bindir -program_transform_name -prefix -exec_prefix -PACKAGE_URL -PACKAGE_BUGREPORT -PACKAGE_STRING -PACKAGE_VERSION -PACKAGE_TARNAME -PACKAGE_NAME -PATH_SEPARATOR -SHELL' -ac_subst_files='' -ac_user_opts=' -enable_option_checking -with_tcl -with_tclinclude -enable_threads -enable_shared -enable_stubs -enable_64bit -enable_64bit_vis -enable_rpath -enable_wince -with_celib -enable_symbols -enable_bsafe -with_ssl_dir -with_gcclib -enable_patents -' - ac_precious_vars='build_alias -host_alias -target_alias -CC -CFLAGS -LDFLAGS -LIBS -CPPFLAGS -CPP' - - -# Initialize some variables set by options. -ac_init_help= -ac_init_version=false -ac_unrecognized_opts= -ac_unrecognized_sep= -# The variables have the same names as the options, with -# dashes changed to underlines. -cache_file=/dev/null -exec_prefix=NONE -no_create= -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -verbose= -x_includes=NONE -x_libraries=NONE - -# Installation directory options. -# These are left unexpanded so users can "make install exec_prefix=/foo" -# and all the variables that are supposed to be based on exec_prefix -# by default will actually change. -# Use braces instead of parens because sh, perl, etc. also accept them. -# (The list follows the same order as the GNU Coding Standards.) -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datarootdir='${prefix}/share' -datadir='${datarootdir}' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -includedir='${prefix}/include' -oldincludedir='/usr/include' -docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' -infodir='${datarootdir}/info' -htmldir='${docdir}' -dvidir='${docdir}' -pdfdir='${docdir}' -psdir='${docdir}' -libdir='${exec_prefix}/lib' -localedir='${datarootdir}/locale' -mandir='${datarootdir}/man' - -ac_prev= -ac_dashdash= -for ac_option -do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval $ac_prev=\$ac_option - ac_prev= - continue - fi - - case $ac_option in - *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; - *=) ac_optarg= ;; - *) ac_optarg=yes ;; - esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case $ac_dashdash$ac_option in - --) - ac_dashdash=yes ;; - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir=$ac_optarg ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build_alias ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build_alias=$ac_optarg ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file=$ac_optarg ;; - - --config-cache | -C) - cache_file=config.cache ;; - - -datadir | --datadir | --datadi | --datad) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=*) - datadir=$ac_optarg ;; - - -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ - | --dataroo | --dataro | --datar) - ac_prev=datarootdir ;; - -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ - | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) - datarootdir=$ac_optarg ;; - - -disable-* | --disable-*) - ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=no ;; - - -docdir | --docdir | --docdi | --doc | --do) - ac_prev=docdir ;; - -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) - docdir=$ac_optarg ;; - - -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) - ac_prev=dvidir ;; - -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) - dvidir=$ac_optarg ;; - - -enable-* | --enable-*) - ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=\$ac_optarg ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix=$ac_optarg ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he | -h) - ac_init_help=long ;; - -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) - ac_init_help=recursive ;; - -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) - ac_init_help=short ;; - - -host | --host | --hos | --ho) - ac_prev=host_alias ;; - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - - -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) - ac_prev=htmldir ;; - -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ - | --ht=*) - htmldir=$ac_optarg ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir=$ac_optarg ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir=$ac_optarg ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir=$ac_optarg ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - - -localedir | --localedir | --localedi | --localed | --locale) - ac_prev=localedir ;; - -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) - localedir=$ac_optarg ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst | --locals) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir=$ac_optarg ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir=$ac_optarg ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix=$ac_optarg ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix=$ac_optarg ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix=$ac_optarg ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - - -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) - ac_prev=pdfdir ;; - -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) - pdfdir=$ac_optarg ;; - - -psdir | --psdir | --psdi | --psd | --ps) - ac_prev=psdir ;; - -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) - psdir=$ac_optarg ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir=$ac_optarg ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir=$ac_optarg ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site=$ac_optarg ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir=$ac_optarg ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir=$ac_optarg ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target_alias ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target_alias=$ac_optarg ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers | -V) - ac_init_version=: ;; - - -with-* | --with-*) - ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=\$ac_optarg ;; - - -without-* | --without-*) - ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=no ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes=$ac_optarg ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - - -*) as_fn_error $? "unrecognized option: \`$ac_option' -Try \`$0 --help' for more information" - ;; - - *=*) - ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` - # Reject names that are not valid shell variable names. - case $ac_envvar in #( - '' | [0-9]* | *[!_$as_cr_alnum]* ) - as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; - esac - eval $ac_envvar=\$ac_optarg - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. - $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" - ;; - - esac -done - -if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` - as_fn_error $? "missing argument to $ac_option" -fi - -if test -n "$ac_unrecognized_opts"; then - case $enable_option_checking in - no) ;; - fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; - *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; - esac -fi - -# Check all directory arguments for consistency. -for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ - datadir sysconfdir sharedstatedir localstatedir includedir \ - oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ - libdir localedir mandir -do - eval ac_val=\$$ac_var - # Remove trailing slashes. - case $ac_val in - */ ) - ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` - eval $ac_var=\$ac_val;; - esac - # Be sure to have absolute directory names. - case $ac_val in - [\\/$]* | ?:[\\/]* ) continue;; - NONE | '' ) case $ac_var in *prefix ) continue;; esac;; - esac - as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" -done - -# There might be people who depend on the old broken behavior: `$host' -# used to hold the argument of --host etc. -# FIXME: To remove some day. -build=$build_alias -host=$host_alias -target=$target_alias - -# FIXME: To remove some day. -if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -fi - -ac_tool_prefix= -test -n "$host_alias" && ac_tool_prefix=$host_alias- - -test "$silent" = yes && exec 6>/dev/null - - -ac_pwd=`pwd` && test -n "$ac_pwd" && -ac_ls_di=`ls -di .` && -ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || - as_fn_error $? "working directory cannot be determined" -test "X$ac_ls_di" = "X$ac_pwd_ls_di" || - as_fn_error $? "pwd does not report name of working directory" - - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then the parent directory. - ac_confdir=`$as_dirname -- "$as_myself" || -$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_myself" : 'X\(//\)[^/]' \| \ - X"$as_myself" : 'X\(//\)$' \| \ - X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_myself" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - srcdir=$ac_confdir - if test ! -r "$srcdir/$ac_unique_file"; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r "$srcdir/$ac_unique_file"; then - test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." - as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" -fi -ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" -ac_abs_confdir=`( - cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" - pwd)` -# When building in place, set srcdir=. -if test "$ac_abs_confdir" = "$ac_pwd"; then - srcdir=. -fi -# Remove unnecessary trailing slashes from srcdir. -# Double slashes in file names in object file debugging info -# mess up M-x gdb in Emacs. -case $srcdir in -*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; -esac -for ac_var in $ac_precious_vars; do - eval ac_env_${ac_var}_set=\${${ac_var}+set} - eval ac_env_${ac_var}_value=\$${ac_var} - eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} - eval ac_cv_env_${ac_var}_value=\$${ac_var} -done - -# -# Report the --help message. -# -if test "$ac_init_help" = "long"; then - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat <<_ACEOF -\`configure' configures tls 1.6.7 to adapt to many kinds of systems. - -Usage: $0 [OPTION]... [VAR=VALUE]... - -To assign environment variables (e.g., CC, CFLAGS...), specify them as -VAR=VALUE. See below for descriptions of some of the useful variables. - -Defaults for the options are specified in brackets. - -Configuration: - -h, --help display this help and exit - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking ...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - -Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] - -By default, \`make install' will install all the files in -\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -an installation prefix other than \`$ac_default_prefix' using \`--prefix', -for instance \`--prefix=\$HOME'. - -For better control, use the options below. - -Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] - --datadir=DIR read-only architecture-independent data [DATAROOTDIR] - --infodir=DIR info documentation [DATAROOTDIR/info] - --localedir=DIR locale-dependent data [DATAROOTDIR/locale] - --mandir=DIR man documentation [DATAROOTDIR/man] - --docdir=DIR documentation root [DATAROOTDIR/doc/tls] - --htmldir=DIR html documentation [DOCDIR] - --dvidir=DIR dvi documentation [DOCDIR] - --pdfdir=DIR pdf documentation [DOCDIR] - --psdir=DIR ps documentation [DOCDIR] -_ACEOF - - cat <<\_ACEOF -_ACEOF -fi - -if test -n "$ac_init_help"; then - case $ac_init_help in - short | recursive ) echo "Configuration of tls 1.6.7:";; - esac - cat <<\_ACEOF - -Optional Features: - --disable-option-checking ignore unrecognized --enable/--with options - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --enable-threads build with threads (default: on) - --enable-shared build and link with shared libraries (default: on) - --enable-stubs build and link with stub libraries. Always true for - shared builds (default: on) - --enable-64bit enable 64bit support (default: off) - --enable-64bit-vis enable 64bit Sparc VIS support (default: off) - --disable-rpath disable rpath support (default: on) - --enable-wince enable Win/CE support (where applicable) - --enable-symbols build with debugging symbols (default: off) - --enable-bsafe Use RSA BSAFE SSL-C libs. Default is to use OpenSSL libs - --enable-patents Use patented code. Default is enabled - -Optional Packages: - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --with-tcl directory containing tcl configuration - (tclConfig.sh) - --with-tclinclude directory containing the public Tcl header files - --with-celib=DIR use Windows/CE support library from DIR - --with-ssl-dir=DIR SSL root directory - --with-gcclib link with libgcc to resolve symbols in a gcc-built openssl library - -Some influential environment variables: - CC C compiler command - CFLAGS C compiler flags - LDFLAGS linker flags, e.g. -L if you have libraries in a - nonstandard directory - LIBS libraries to pass to the linker, e.g. -l - CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if - you have headers in a nonstandard directory - CPP C preprocessor - -Use these variables to override the choices made by `configure' or to help -it to find libraries and programs with nonstandard names/locations. - -Report bugs to the package provider. -_ACEOF -ac_status=$? -fi - -if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d "$ac_dir" || - { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || - continue - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - cd "$ac_dir" || { ac_status=$?; continue; } - # Check for guested configure. - if test -f "$ac_srcdir/configure.gnu"; then - echo && - $SHELL "$ac_srcdir/configure.gnu" --help=recursive - elif test -f "$ac_srcdir/configure"; then - echo && - $SHELL "$ac_srcdir/configure" --help=recursive - else - $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi || ac_status=$? - cd "$ac_pwd" || { ac_status=$?; break; } - done -fi - -test -n "$ac_init_help" && exit $ac_status -if $ac_init_version; then - cat <<\_ACEOF -tls configure 1.6.7 -generated by GNU Autoconf 2.69 - -Copyright (C) 2012 Free Software Foundation, Inc. -This configure script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it. -_ACEOF - exit -fi - -## ------------------------ ## -## Autoconf initialization. ## -## ------------------------ ## - -# ac_fn_c_try_compile LINENO -# -------------------------- -# Try to compile conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext - if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_compile - -# ac_fn_c_try_cpp LINENO -# ---------------------- -# Try to preprocess conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_cpp () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } > conftest.i && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_cpp - -# ac_fn_c_try_run LINENO -# ---------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes -# that executables *can* be run. -ac_fn_c_try_run () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then : - ac_retval=0 -else - $as_echo "$as_me: program exited with status $ac_status" >&5 - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=$ac_status -fi - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_run - -# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES -# ------------------------------------------------------- -# Tests whether HEADER exists and can be compiled using the include files in -# INCLUDES, setting the cache variable VAR accordingly. -ac_fn_c_check_header_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#include <$2> -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_header_compile - -# ac_fn_c_try_link LINENO -# ----------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_link () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext conftest$ac_exeext - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - test -x conftest$ac_exeext - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information - # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would - # interfere with the next link command; also delete a directory that is - # left behind by Apple's compiler. We do this before executing the actions. - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_link - -# ac_fn_c_check_func LINENO FUNC VAR -# ---------------------------------- -# Tests whether FUNC exists, setting the cache variable VAR accordingly -ac_fn_c_check_func () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -/* Define $2 to an innocuous variant, in case declares $2. - For example, HP-UX 11i declares gettimeofday. */ -#define $2 innocuous_$2 - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $2 (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $2 - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $2 (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$2 || defined __stub___$2 -choke me -#endif - -int -main () -{ -return $2 (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_func -cat >config.log <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by tls $as_me 1.6.7, which was -generated by GNU Autoconf 2.69. Invocation command line was - - $ $0 $@ - -_ACEOF -exec 5>>config.log -{ -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME - -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - $as_echo "PATH: $as_dir" - done -IFS=$as_save_IFS - -} >&5 - -cat >&5 <<_ACEOF - - -## ----------- ## -## Core tests. ## -## ----------- ## - -_ACEOF - - -# Keep a trace of the command line. -# Strip out --no-create and --no-recursion so they do not pile up. -# Strip out --silent because we don't want to record it for future runs. -# Also quote any args containing shell meta-characters. -# Make two passes to allow for proper duplicate-argument suppression. -ac_configure_args= -ac_configure_args0= -ac_configure_args1= -ac_must_keep_next=false -for ac_pass in 1 2 -do - for ac_arg - do - case $ac_arg in - -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; - *\'*) - ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in - 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; - 2) - as_fn_append ac_configure_args1 " '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else - case $ac_arg in - *=* | --config-cache | -C | -disable-* | --disable-* \ - | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ - | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ - | -with-* | --with-* | -without-* | --without-* | --x) - case "$ac_configure_args0 " in - "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; - esac - ;; - -* ) ac_must_keep_next=true ;; - esac - fi - as_fn_append ac_configure_args " '$ac_arg'" - ;; - esac - done -done -{ ac_configure_args0=; unset ac_configure_args0;} -{ ac_configure_args1=; unset ac_configure_args1;} - -# When interrupted or exit'd, cleanup temporary files, and complete -# config.log. We remove comments because anyway the quotes in there -# would cause problems or look ugly. -# WARNING: Use '\'' to represent an apostrophe within the trap. -# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. -trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { - echo - - $as_echo "## ---------------- ## -## Cache variables. ## -## ---------------- ##" - echo - # The following way of writing the cache mishandles newlines in values, -( - for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - (set) 2>&1 | - case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - sed -n \ - "s/'\''/'\''\\\\'\'''\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" - ;; #( - *) - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) - echo - - $as_echo "## ----------------- ## -## Output variables. ## -## ----------------- ##" - echo - for ac_var in $ac_subst_vars - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - - if test -n "$ac_subst_files"; then - $as_echo "## ------------------- ## -## File substitutions. ## -## ------------------- ##" - echo - for ac_var in $ac_subst_files - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - fi - - if test -s confdefs.h; then - $as_echo "## ----------- ## -## confdefs.h. ## -## ----------- ##" - echo - cat confdefs.h - echo - fi - test "$ac_signal" != 0 && - $as_echo "$as_me: caught signal $ac_signal" - $as_echo "$as_me: exit $exit_status" - } >&5 - rm -f core *.core core.conftest.* && - rm -f -r conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status -' 0 -for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal -done -ac_signal=0 - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -f -r conftest* confdefs.h - -$as_echo "/* confdefs.h */" > confdefs.h - -# Predefined preprocessor variables. - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_NAME "$PACKAGE_NAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_TARNAME "$PACKAGE_TARNAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_VERSION "$PACKAGE_VERSION" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_STRING "$PACKAGE_STRING" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_URL "$PACKAGE_URL" -_ACEOF - - -# Let the site file select an alternate cache file if it wants to. -# Prefer an explicitly selected file to automatically selected ones. -ac_site_file1=NONE -ac_site_file2=NONE -if test -n "$CONFIG_SITE"; then - # We do not want a PATH search for config.site. - case $CONFIG_SITE in #(( - -*) ac_site_file1=./$CONFIG_SITE;; - */*) ac_site_file1=$CONFIG_SITE;; - *) ac_site_file1=./$CONFIG_SITE;; - esac -elif test "x$prefix" != xNONE; then - ac_site_file1=$prefix/share/config.site - ac_site_file2=$prefix/etc/config.site -else - ac_site_file1=$ac_default_prefix/share/config.site - ac_site_file2=$ac_default_prefix/etc/config.site -fi -for ac_site_file in "$ac_site_file1" "$ac_site_file2" -do - test "x$ac_site_file" = xNONE && continue - if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 -$as_echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" \ - || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "failed to load site script $ac_site_file -See \`config.log' for more details" "$LINENO" 5; } - fi -done - -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special files - # actually), so we avoid doing that. DJGPP emulates it as a regular file. - if test /dev/null != "$cache_file" && test -f "$cache_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 -$as_echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . "$cache_file";; - *) . "./$cache_file";; - esac - fi -else - { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 -$as_echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file -fi - -# Check that the precious variables saved in the cache have kept the same -# value. -ac_cache_corrupted=false -for ac_var in $ac_precious_vars; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val=\$ac_cv_env_${ac_var}_value - eval ac_new_val=\$ac_env_${ac_var}_value - case $ac_old_set,$ac_new_set in - set,) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then - # differences in whitespace do not lead to failure. - ac_old_val_w=`echo x $ac_old_val` - ac_new_val_w=`echo x $ac_new_val` - if test "$ac_old_val_w" != "$ac_new_val_w"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 -$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - ac_cache_corrupted=: - else - { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 -$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} - eval $ac_var=\$ac_old_val - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 -$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 -$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in - *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) as_fn_append ac_configure_args " '$ac_arg'" ;; - esac - fi -done -if $ac_cache_corrupted; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 -$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} - as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 -fi -## -------------------- ## -## Main body of script. ## -## -------------------- ## - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - -#-------------------------------------------------------------------- -# Call TEA_INIT as the first TEA_ macro to set up initial vars. -# This will define a ${TEA_PLATFORM} variable == "unix" or "windows" -# as well as PKG_LIB_FILE and PKG_STUB_LIB_FILE. -#-------------------------------------------------------------------- - - - TEA_VERSION="3.13" - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking TEA configuration" >&5 -$as_echo_n "checking TEA configuration... " >&6; } - if test x"${PACKAGE_NAME}" = x ; then - as_fn_error $? " -The PACKAGE_NAME variable must be defined by your TEA configure.ac" "$LINENO" 5 - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok (TEA ${TEA_VERSION})" >&5 -$as_echo "ok (TEA ${TEA_VERSION})" >&6; } - - # If the user did not set CFLAGS, set it now to keep macros - # like AC_PROG_CC and AC_TRY_COMPILE from adding "-g -O2". - if test "${CFLAGS+set}" != "set" ; then - CFLAGS="" - fi - - case "`uname -s`" in - *win32*|*WIN32*|*MINGW32_*|*MINGW64_*) - # Extract the first word of "cygpath", so it can be a program name with args. -set dummy cygpath; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CYGPATH+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CYGPATH"; then - ac_cv_prog_CYGPATH="$CYGPATH" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CYGPATH="cygpath -m" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - test -z "$ac_cv_prog_CYGPATH" && ac_cv_prog_CYGPATH="echo" -fi -fi -CYGPATH=$ac_cv_prog_CYGPATH -if test -n "$CYGPATH"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CYGPATH" >&5 -$as_echo "$CYGPATH" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - EXEEXT=".exe" - TEA_PLATFORM="windows" - ;; - *CYGWIN_*) - EXEEXT=".exe" - # CYGPATH and TEA_PLATFORM are determined later in LOAD_TCLCONFIG - ;; - *) - CYGPATH=echo - # Maybe we are cross-compiling.... - case ${host_alias} in - *mingw32*) - EXEEXT=".exe" - TEA_PLATFORM="windows" - ;; - *) - EXEEXT="" - TEA_PLATFORM="unix" - ;; - esac - ;; - esac - - # Check if exec_prefix is set. If not use fall back to prefix. - # Note when adjusted, so that TEA_PREFIX can correct for this. - # This is needed for recursive configures, since autoconf propagates - # $prefix, but not $exec_prefix (doh!). - if test x$exec_prefix = xNONE ; then - exec_prefix_default=yes - exec_prefix=$prefix - fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: configuring ${PACKAGE_NAME} ${PACKAGE_VERSION}" >&5 -$as_echo "$as_me: configuring ${PACKAGE_NAME} ${PACKAGE_VERSION}" >&6;} - - - - - # This package name must be replaced statically for AC_SUBST to work - - # Substitute STUB_LIB_FILE in case package creates a stub library too. - - - # We AC_SUBST these here to ensure they are subst'ed, - # in case the user doesn't call TEA_ADD_... - - - - - - - - - # Configure the installer. - - INSTALL='$(SHELL) $(srcdir)/tclconfig/install-sh -c' - INSTALL_DATA_DIR='${INSTALL} -d -m 755' - INSTALL_DATA='${INSTALL} -m 644' - INSTALL_PROGRAM='${INSTALL} -m 755' - INSTALL_SCRIPT='${INSTALL} -m 755' - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking system version" >&5 -$as_echo_n "checking system version... " >&6; } -if ${tcl_cv_sys_version+:} false; then : - $as_echo_n "(cached) " >&6 -else - - # TEA specific: - if test "${TEA_PLATFORM}" = "windows" ; then - tcl_cv_sys_version=windows - else - tcl_cv_sys_version=`uname -s`-`uname -r` - if test "$?" -ne 0 ; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: can't find uname command" >&5 -$as_echo "$as_me: WARNING: can't find uname command" >&2;} - tcl_cv_sys_version=unknown - else - if test "`uname -s`" = "AIX" ; then - tcl_cv_sys_version=AIX-`uname -v`.`uname -r` - fi - fi - fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_sys_version" >&5 -$as_echo "$tcl_cv_sys_version" >&6; } - system=$tcl_cv_sys_version - - case $system in - HP-UX-*) INSTALL_LIBRARY='${INSTALL} -m 755' ;; - *) INSTALL_LIBRARY='${INSTALL} -m 644' ;; - esac - - - - - - - - - - -ac_aux_dir= -for ac_dir in tclconfig "$srcdir"/tclconfig; do - if test -f "$ac_dir/install-sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f "$ac_dir/install.sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - elif test -f "$ac_dir/shtool"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/shtool install -c" - break - fi -done -if test -z "$ac_aux_dir"; then - as_fn_error $? "cannot find install-sh, install.sh, or shtool in tclconfig \"$srcdir\"/tclconfig" "$LINENO" 5 -fi - -# These three variables are undocumented and unsupported, -# and are intended to be withdrawn in a future Autoconf release. -# They can cause serious problems if a builder's source tree is in a directory -# whose full name contains unusual characters. -ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. -ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. -ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. - - - -#-------------------------------------------------------------------- -# Load the tclConfig.sh file -#-------------------------------------------------------------------- - - - - # - # Ok, lets find the tcl configuration - # First, look for one uninstalled. - # the alternative search directory is invoked by --with-tcl - # - - if test x"${no_tcl}" = x ; then - # we reset no_tcl in case something fails here - no_tcl=true - -# Check whether --with-tcl was given. -if test "${with_tcl+set}" = set; then : - withval=$with_tcl; with_tclconfig="${withval}" -fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Tcl configuration" >&5 -$as_echo_n "checking for Tcl configuration... " >&6; } - if ${ac_cv_c_tclconfig+:} false; then : - $as_echo_n "(cached) " >&6 -else - - - # First check to see if --with-tcl was specified. - if test x"${with_tclconfig}" != x ; then - case "${with_tclconfig}" in - */tclConfig.sh ) - if test -f "${with_tclconfig}"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: --with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself" >&5 -$as_echo "$as_me: WARNING: --with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself" >&2;} - with_tclconfig="`echo "${with_tclconfig}" | sed 's!/tclConfig\.sh$!!'`" - fi ;; - esac - if test -f "${with_tclconfig}/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd "${with_tclconfig}"; pwd)`" - else - as_fn_error $? "${with_tclconfig} directory doesn't contain tclConfig.sh" "$LINENO" 5 - fi - fi - - # then check for a private Tcl installation - if test x"${ac_cv_c_tclconfig}" = x ; then - for i in \ - ../tcl \ - `ls -dr ../tcl[8-9].[0-9].[0-9]* 2>/dev/null` \ - `ls -dr ../tcl[8-9].[0-9] 2>/dev/null` \ - `ls -dr ../tcl[8-9].[0-9]* 2>/dev/null` \ - ../../tcl \ - `ls -dr ../../tcl[8-9].[0-9].[0-9]* 2>/dev/null` \ - `ls -dr ../../tcl[8-9].[0-9] 2>/dev/null` \ - `ls -dr ../../tcl[8-9].[0-9]* 2>/dev/null` \ - ../../../tcl \ - `ls -dr ../../../tcl[8-9].[0-9].[0-9]* 2>/dev/null` \ - `ls -dr ../../../tcl[8-9].[0-9] 2>/dev/null` \ - `ls -dr ../../../tcl[8-9].[0-9]* 2>/dev/null` ; do - if test "${TEA_PLATFORM}" = "windows" \ - -a -f "$i/win/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd $i/win; pwd)`" - break - fi - if test -f "$i/unix/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd $i/unix; pwd)`" - break - fi - done - fi - - # on Darwin, check in Framework installation locations - if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tclconfig}" = x ; then - for i in `ls -d ~/Library/Frameworks 2>/dev/null` \ - `ls -d /Library/Frameworks 2>/dev/null` \ - `ls -d /Network/Library/Frameworks 2>/dev/null` \ - `ls -d /System/Library/Frameworks 2>/dev/null` \ - `ls -d /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/Library/Frameworks/Tcl.framework 2>/dev/null` \ - `ls -d /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/Network/Library/Frameworks/Tcl.framework 2>/dev/null` \ - `ls -d /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/System/Library/Frameworks/Tcl.framework 2>/dev/null` \ - ; do - if test -f "$i/Tcl.framework/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd $i/Tcl.framework; pwd)`" - break - fi - done - fi - - # TEA specific: on Windows, check in common installation locations - if test "${TEA_PLATFORM}" = "windows" \ - -a x"${ac_cv_c_tclconfig}" = x ; then - for i in `ls -d C:/Tcl/lib 2>/dev/null` \ - `ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \ - ; do - if test -f "$i/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd $i; pwd)`" - break - fi - done - fi - - # check in a few common install locations - if test x"${ac_cv_c_tclconfig}" = x ; then - for i in `ls -d ${libdir} 2>/dev/null` \ - `ls -d ${exec_prefix}/lib 2>/dev/null` \ - `ls -d ${prefix}/lib 2>/dev/null` \ - `ls -d /usr/local/lib 2>/dev/null` \ - `ls -d /usr/contrib/lib 2>/dev/null` \ - `ls -d /usr/pkg/lib 2>/dev/null` \ - `ls -d /usr/lib 2>/dev/null` \ - `ls -d /usr/lib64 2>/dev/null` \ - `ls -d /usr/lib/tcl8.6 2>/dev/null` \ - `ls -d /usr/lib/tcl8.5 2>/dev/null` \ - `ls -d /usr/local/lib/tcl8.6 2>/dev/null` \ - `ls -d /usr/local/lib/tcl8.5 2>/dev/null` \ - `ls -d /usr/local/lib/tcl/tcl8.6 2>/dev/null` \ - `ls -d /usr/local/lib/tcl/tcl8.5 2>/dev/null` \ - ; do - if test -f "$i/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd $i; pwd)`" - break - fi - done - fi - - # check in a few other private locations - if test x"${ac_cv_c_tclconfig}" = x ; then - for i in \ - ${srcdir}/../tcl \ - `ls -dr ${srcdir}/../tcl[8-9].[0-9].[0-9]* 2>/dev/null` \ - `ls -dr ${srcdir}/../tcl[8-9].[0-9] 2>/dev/null` \ - `ls -dr ${srcdir}/../tcl[8-9].[0-9]* 2>/dev/null` ; do - if test "${TEA_PLATFORM}" = "windows" \ - -a -f "$i/win/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd $i/win; pwd)`" - break - fi - if test -f "$i/unix/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd $i/unix; pwd)`" - break - fi - done - fi - -fi - - - if test x"${ac_cv_c_tclconfig}" = x ; then - TCL_BIN_DIR="# no Tcl configs found" - as_fn_error $? "Can't find Tcl configuration definitions. Use --with-tcl to specify a directory containing tclConfig.sh" "$LINENO" 5 - else - no_tcl= - TCL_BIN_DIR="${ac_cv_c_tclconfig}" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: found ${TCL_BIN_DIR}/tclConfig.sh" >&5 -$as_echo "found ${TCL_BIN_DIR}/tclConfig.sh" >&6; } - fi - fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - fi -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl.exe -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_CC" && break -done - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -fi - -fi - - -test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "no acceptable C compiler found in \$PATH -See \`config.log' for more details" "$LINENO" 5; } - -# Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done - -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 -$as_echo_n "checking whether the C compiler works... " >&6; } -ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` - -# The possible output files: -ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" - -ac_rmfiles= -for ac_file in $ac_files -do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - * ) ac_rmfiles="$ac_rmfiles $ac_file";; - esac -done -rm -f $ac_rmfiles - -if { { ac_try="$ac_link_default" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link_default") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. -# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' -# in a Makefile. We should not override ac_cv_exeext if it was cached, -# so that the user can short-circuit this test for compilers unknown to -# Autoconf. -for ac_file in $ac_files '' -do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; - then :; else - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - fi - # We set ac_cv_exeext here because the later test for it is not - # safe: cross compilers may not add the suffix if given an `-o' - # argument, so we may need to know it at that point already. - # Even if this section looks crufty: it has the advantage of - # actually working. - break;; - * ) - break;; - esac -done -test "$ac_cv_exeext" = no && ac_cv_exeext= - -else - ac_file='' -fi -if test -z "$ac_file"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "C compiler cannot create executables -See \`config.log' for more details" "$LINENO" 5; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 -$as_echo_n "checking for C compiler default output file name... " >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 -$as_echo "$ac_file" >&6; } -ac_exeext=$ac_cv_exeext - -rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 -$as_echo_n "checking for suffix of executables... " >&6; } -if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - break;; - * ) break;; - esac -done -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest conftest$ac_cv_exeext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 -$as_echo "$ac_cv_exeext" >&6; } - -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -FILE *f = fopen ("conftest.out", "w"); - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -ac_clean_files="$ac_clean_files conftest.out" -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 -$as_echo_n "checking whether we are cross compiling... " >&6; } -if test "$cross_compiling" != yes; then - { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if { ac_try='./conftest$ac_cv_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details" "$LINENO" 5; } - fi - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 -$as_echo "$cross_compiling" >&6; } - -rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 -$as_echo_n "checking for suffix of object files... " >&6; } -if ${ac_cv_objext+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - for ac_file in conftest.o conftest.obj conftest.*; do - test -f "$ac_file" || continue; - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of object files: cannot compile -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 -$as_echo "$ac_cv_objext" >&6; } -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 -$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if ${ac_cv_c_compiler_gnu+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_compiler_gnu=yes -else - ac_compiler_gnu=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 -$as_echo "$ac_cv_c_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GCC=yes -else - GCC= -fi -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 -$as_echo_n "checking whether $CC accepts -g... " >&6; } -if ${ac_cv_prog_cc_g+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_save_c_werror_flag=$ac_c_werror_flag - ac_c_werror_flag=yes - ac_cv_prog_cc_g=no - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -else - CFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - -else - ac_c_werror_flag=$ac_save_c_werror_flag - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 -$as_echo "$ac_cv_prog_cc_g" >&6; } -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 -$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if ${ac_cv_prog_cc_c89+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_prog_cc_c89=no -ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -struct stat; -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters - inside strings and character constants. */ -#define FOO(x) 'x' -int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ - -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_c89=$ac_arg -fi -rm -f core conftest.err conftest.$ac_objext - test "x$ac_cv_prog_cc_c89" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC - -fi -# AC_CACHE_VAL -case "x$ac_cv_prog_cc_c89" in - x) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -$as_echo "none needed" >&6; } ;; - xno) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -$as_echo "unsupported" >&6; } ;; - *) - CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 -$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; -esac -if test "x$ac_cv_prog_cc_c89" != xno; then : - -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for existence of ${TCL_BIN_DIR}/tclConfig.sh" >&5 -$as_echo_n "checking for existence of ${TCL_BIN_DIR}/tclConfig.sh... " >&6; } - - if test -f "${TCL_BIN_DIR}/tclConfig.sh" ; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: loading" >&5 -$as_echo "loading" >&6; } - . "${TCL_BIN_DIR}/tclConfig.sh" - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: could not find ${TCL_BIN_DIR}/tclConfig.sh" >&5 -$as_echo "could not find ${TCL_BIN_DIR}/tclConfig.sh" >&6; } - fi - - # eval is required to do the TCL_DBGX substitution - eval "TCL_LIB_FILE=\"${TCL_LIB_FILE}\"" - eval "TCL_STUB_LIB_FILE=\"${TCL_STUB_LIB_FILE}\"" - - # If the TCL_BIN_DIR is the build directory (not the install directory), - # then set the common variable name to the value of the build variables. - # For example, the variable TCL_LIB_SPEC will be set to the value - # of TCL_BUILD_LIB_SPEC. An extension should make use of TCL_LIB_SPEC - # instead of TCL_BUILD_LIB_SPEC since it will work with both an - # installed and uninstalled version of Tcl. - if test -f "${TCL_BIN_DIR}/Makefile" ; then - TCL_LIB_SPEC="${TCL_BUILD_LIB_SPEC}" - TCL_STUB_LIB_SPEC="${TCL_BUILD_STUB_LIB_SPEC}" - TCL_STUB_LIB_PATH="${TCL_BUILD_STUB_LIB_PATH}" - elif test "`uname -s`" = "Darwin"; then - # If Tcl was built as a framework, attempt to use the libraries - # from the framework at the given location so that linking works - # against Tcl.framework installed in an arbitrary location. - case ${TCL_DEFS} in - *TCL_FRAMEWORK*) - if test -f "${TCL_BIN_DIR}/${TCL_LIB_FILE}"; then - for i in "`cd "${TCL_BIN_DIR}"; pwd`" \ - "`cd "${TCL_BIN_DIR}"/../..; pwd`"; do - if test "`basename "$i"`" = "${TCL_LIB_FILE}.framework"; then - TCL_LIB_SPEC="-F`dirname "$i" | sed -e 's/ /\\\\ /g'` -framework ${TCL_LIB_FILE}" - break - fi - done - fi - if test -f "${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}"; then - TCL_STUB_LIB_SPEC="-L`echo "${TCL_BIN_DIR}" | sed -e 's/ /\\\\ /g'` ${TCL_STUB_LIB_FLAG}" - TCL_STUB_LIB_PATH="${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}" - fi - ;; - esac - fi - - # eval is required to do the TCL_DBGX substitution - eval "TCL_LIB_FLAG=\"${TCL_LIB_FLAG}\"" - eval "TCL_LIB_SPEC=\"${TCL_LIB_SPEC}\"" - eval "TCL_STUB_LIB_FLAG=\"${TCL_STUB_LIB_FLAG}\"" - eval "TCL_STUB_LIB_SPEC=\"${TCL_STUB_LIB_SPEC}\"" - - - - - - - - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking platform" >&5 -$as_echo_n "checking platform... " >&6; } - hold_cc=$CC; CC="$TCL_CC" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - #ifdef _WIN32 - #error win32 - #endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - - TEA_PLATFORM="unix" - CYGPATH=echo - -else - - TEA_PLATFORM="windows" - # Extract the first word of "cygpath", so it can be a program name with args. -set dummy cygpath; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CYGPATH+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CYGPATH"; then - ac_cv_prog_CYGPATH="$CYGPATH" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CYGPATH="cygpath -m" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - test -z "$ac_cv_prog_CYGPATH" && ac_cv_prog_CYGPATH="echo" -fi -fi -CYGPATH=$ac_cv_prog_CYGPATH -if test -n "$CYGPATH"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CYGPATH" >&5 -$as_echo "$CYGPATH" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - CC=$hold_cc - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TEA_PLATFORM" >&5 -$as_echo "$TEA_PLATFORM" >&6; } - - # The BUILD_$pkg is to define the correct extern storage class - # handling when making this package - -cat >>confdefs.h <<_ACEOF -#define BUILD_${PACKAGE_NAME} /**/ -_ACEOF - - # Do this here as we have fully defined TEA_PLATFORM now - if test "${TEA_PLATFORM}" = "windows" ; then - EXEEXT=".exe" - CLEANFILES="$CLEANFILES *.lib *.dll *.pdb *.exp" - fi - - # TEA specific: - - - - - - - - -#-------------------------------------------------------------------- -# Load the tkConfig.sh file if necessary (Tk extension) -#-------------------------------------------------------------------- - -#TEA_PATH_TKCONFIG -#TEA_LOAD_TKCONFIG - -#----------------------------------------------------------------------- -# Handle the --prefix=... option by defaulting to what Tcl gave. -# Must be called after TEA_LOAD_TCLCONFIG and before TEA_SETUP_COMPILER. -#----------------------------------------------------------------------- - - - if test "${prefix}" = "NONE"; then - prefix_default=yes - if test x"${TCL_PREFIX}" != x; then - { $as_echo "$as_me:${as_lineno-$LINENO}: --prefix defaulting to TCL_PREFIX ${TCL_PREFIX}" >&5 -$as_echo "$as_me: --prefix defaulting to TCL_PREFIX ${TCL_PREFIX}" >&6;} - prefix=${TCL_PREFIX} - else - { $as_echo "$as_me:${as_lineno-$LINENO}: --prefix defaulting to /usr/local" >&5 -$as_echo "$as_me: --prefix defaulting to /usr/local" >&6;} - prefix=/usr/local - fi - fi - if test "${exec_prefix}" = "NONE" -a x"${prefix_default}" = x"yes" \ - -o x"${exec_prefix_default}" = x"yes" ; then - if test x"${TCL_EXEC_PREFIX}" != x; then - { $as_echo "$as_me:${as_lineno-$LINENO}: --exec-prefix defaulting to TCL_EXEC_PREFIX ${TCL_EXEC_PREFIX}" >&5 -$as_echo "$as_me: --exec-prefix defaulting to TCL_EXEC_PREFIX ${TCL_EXEC_PREFIX}" >&6;} - exec_prefix=${TCL_EXEC_PREFIX} - else - { $as_echo "$as_me:${as_lineno-$LINENO}: --exec-prefix defaulting to ${prefix}" >&5 -$as_echo "$as_me: --exec-prefix defaulting to ${prefix}" >&6;} - exec_prefix=$prefix - fi - fi - - -#----------------------------------------------------------------------- -# Standard compiler checks. -# This sets up CC by using the CC env var, or looks for gcc otherwise. -# This also calls AC_PROG_CC and a few others to create the basic setup -# necessary to compile executables. -#----------------------------------------------------------------------- - - - # Don't put any macros that use the compiler (e.g. AC_TRY_COMPILE) - # in this macro, they need to go into TEA_SETUP_COMPILER instead. - - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - fi -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl.exe -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_CC" && break -done - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -fi - -fi - - -test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "no acceptable C compiler found in \$PATH -See \`config.log' for more details" "$LINENO" 5; } - -# Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 -$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if ${ac_cv_c_compiler_gnu+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_compiler_gnu=yes -else - ac_compiler_gnu=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 -$as_echo "$ac_cv_c_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GCC=yes -else - GCC= -fi -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 -$as_echo_n "checking whether $CC accepts -g... " >&6; } -if ${ac_cv_prog_cc_g+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_save_c_werror_flag=$ac_c_werror_flag - ac_c_werror_flag=yes - ac_cv_prog_cc_g=no - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -else - CFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - -else - ac_c_werror_flag=$ac_save_c_werror_flag - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 -$as_echo "$ac_cv_prog_cc_g" >&6; } -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 -$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if ${ac_cv_prog_cc_c89+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_prog_cc_c89=no -ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -struct stat; -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters - inside strings and character constants. */ -#define FOO(x) 'x' -int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ - -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_c89=$ac_arg -fi -rm -f core conftest.err conftest.$ac_objext - test "x$ac_cv_prog_cc_c89" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC - -fi -# AC_CACHE_VAL -case "x$ac_cv_prog_cc_c89" in - x) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -$as_echo "none needed" >&6; } ;; - xno) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -$as_echo "unsupported" >&6; } ;; - *) - CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 -$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; -esac -if test "x$ac_cv_prog_cc_c89" != xno; then : - -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 -$as_echo_n "checking how to run the C preprocessor... " >&6; } -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if ${ac_cv_prog_CPP+:} false; then : - $as_echo_n "(cached) " >&6 -else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - break -fi - - done - ac_cv_prog_CPP=$CPP - -fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 -$as_echo "$CPP" >&6; } -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details" "$LINENO" 5; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - #-------------------------------------------------------------------- - # Checks to see if the make program sets the $MAKE variable. - #-------------------------------------------------------------------- - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } -set x ${MAKE-make} -ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat >conftest.make <<\_ACEOF -SHELL = /bin/sh -all: - @echo '@@@%%%=$(MAKE)=@@@%%%' -_ACEOF -# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. -case `${MAKE-make} -f conftest.make 2>/dev/null` in - *@@@%%%=?*=@@@%%%*) - eval ac_cv_prog_make_${ac_make}_set=yes;; - *) - eval ac_cv_prog_make_${ac_make}_set=no;; -esac -rm -f conftest.make -fi -if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - SET_MAKE= -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - SET_MAKE="MAKE=${MAKE-make}" -fi - - - #-------------------------------------------------------------------- - # Find ranlib - #-------------------------------------------------------------------- - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_RANLIB+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -RANLIB=$ac_cv_prog_RANLIB -if test -n "$RANLIB"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 -$as_echo "$RANLIB" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_RANLIB"; then - ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_RANLIB="ranlib" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -if test -n "$ac_ct_RANLIB"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 -$as_echo "$ac_ct_RANLIB" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_RANLIB" = x; then - RANLIB="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - RANLIB=$ac_ct_RANLIB - fi -else - RANLIB="$ac_cv_prog_RANLIB" -fi - - - #-------------------------------------------------------------------- - # Determines the correct binary file extension (.o, .obj, .exe etc.) - #-------------------------------------------------------------------- - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 -$as_echo_n "checking for grep that handles long lines and -e... " >&6; } -if ${ac_cv_path_GREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$GREP"; then - ac_path_GREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in grep ggrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_GREP" || continue -# Check for GNU ac_path_GREP and select it if it is found. - # Check for GNU $ac_path_GREP -case `"$ac_path_GREP" --version 2>&1` in -*GNU*) - ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'GREP' >> "conftest.nl" - "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_GREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_GREP="$ac_path_GREP" - ac_path_GREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_GREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_GREP"; then - as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_GREP=$GREP -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 -$as_echo "$ac_cv_path_GREP" >&6; } - GREP="$ac_cv_path_GREP" - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 -$as_echo_n "checking for egrep... " >&6; } -if ${ac_cv_path_EGREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 - then ac_cv_path_EGREP="$GREP -E" - else - if test -z "$EGREP"; then - ac_path_EGREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in egrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_EGREP" || continue -# Check for GNU ac_path_EGREP and select it if it is found. - # Check for GNU $ac_path_EGREP -case `"$ac_path_EGREP" --version 2>&1` in -*GNU*) - ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'EGREP' >> "conftest.nl" - "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_EGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_EGREP="$ac_path_EGREP" - ac_path_EGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_EGREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_EGREP"; then - as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_EGREP=$EGREP -fi - - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 -$as_echo "$ac_cv_path_EGREP" >&6; } - EGREP="$ac_cv_path_EGREP" - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 -$as_echo_n "checking for ANSI C header files... " >&6; } -if ${ac_cv_header_stdc+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#include -#include - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_header_stdc=yes -else - ac_cv_header_stdc=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then : - : -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - return 2; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - -else - ac_cv_header_stdc=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 -$as_echo "$ac_cv_header_stdc" >&6; } -if test $ac_cv_header_stdc = yes; then - -$as_echo "#define STDC_HEADERS 1" >>confdefs.h - -fi - -# On IRIX 5.3, sys/types and inttypes.h are conflicting. -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default -" -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - - - # Any macros that use the compiler (e.g. AC_TRY_COMPILE) have to go here. - - - #------------------------------------------------------------------------ - # If we're using GCC, see if the compiler understands -pipe. If so, use it. - # It makes compiling go faster. (This is only a performance feature.) - #------------------------------------------------------------------------ - - if test -z "$no_pipe" -a -n "$GCC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the compiler understands -pipe" >&5 -$as_echo_n "checking if the compiler understands -pipe... " >&6; } -if ${tcl_cv_cc_pipe+:} false; then : - $as_echo_n "(cached) " >&6 -else - - hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -pipe" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - tcl_cv_cc_pipe=yes -else - tcl_cv_cc_pipe=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - CFLAGS=$hold_cflags -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_cc_pipe" >&5 -$as_echo "$tcl_cv_cc_pipe" >&6; } - if test $tcl_cv_cc_pipe = yes; then - CFLAGS="$CFLAGS -pipe" - fi - fi - - #-------------------------------------------------------------------- - # Common compiler flag setup - #-------------------------------------------------------------------- - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether byte ordering is bigendian" >&5 -$as_echo_n "checking whether byte ordering is bigendian... " >&6; } -if ${ac_cv_c_bigendian+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_c_bigendian=unknown - # See if we're dealing with a universal compiler. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifndef __APPLE_CC__ - not a universal capable compiler - #endif - typedef int dummy; - -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - - # Check for potential -arch flags. It is not universal unless - # there are at least two -arch flags with different values. - ac_arch= - ac_prev= - for ac_word in $CC $CFLAGS $CPPFLAGS $LDFLAGS; do - if test -n "$ac_prev"; then - case $ac_word in - i?86 | x86_64 | ppc | ppc64) - if test -z "$ac_arch" || test "$ac_arch" = "$ac_word"; then - ac_arch=$ac_word - else - ac_cv_c_bigendian=universal - break - fi - ;; - esac - ac_prev= - elif test "x$ac_word" = "x-arch"; then - ac_prev=arch - fi - done -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - if test $ac_cv_c_bigendian = unknown; then - # See if sys/param.h defines the BYTE_ORDER macro. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - #include - -int -main () -{ -#if ! (defined BYTE_ORDER && defined BIG_ENDIAN \ - && defined LITTLE_ENDIAN && BYTE_ORDER && BIG_ENDIAN \ - && LITTLE_ENDIAN) - bogus endian macros - #endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - # It does; now see whether it defined to BIG_ENDIAN or not. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - #include - -int -main () -{ -#if BYTE_ORDER != BIG_ENDIAN - not big endian - #endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_c_bigendian=yes -else - ac_cv_c_bigendian=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - fi - if test $ac_cv_c_bigendian = unknown; then - # See if defines _LITTLE_ENDIAN or _BIG_ENDIAN (e.g., Solaris). - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -int -main () -{ -#if ! (defined _LITTLE_ENDIAN || defined _BIG_ENDIAN) - bogus endian macros - #endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - # It does; now see whether it defined to _BIG_ENDIAN or not. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -int -main () -{ -#ifndef _BIG_ENDIAN - not big endian - #endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_c_bigendian=yes -else - ac_cv_c_bigendian=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - fi - if test $ac_cv_c_bigendian = unknown; then - # Compile a test program. - if test "$cross_compiling" = yes; then : - # Try to guess by grepping values from an object file. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -short int ascii_mm[] = - { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 }; - short int ascii_ii[] = - { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 }; - int use_ascii (int i) { - return ascii_mm[i] + ascii_ii[i]; - } - short int ebcdic_ii[] = - { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 }; - short int ebcdic_mm[] = - { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 }; - int use_ebcdic (int i) { - return ebcdic_mm[i] + ebcdic_ii[i]; - } - extern int foo; - -int -main () -{ -return use_ascii (foo) == use_ebcdic (foo); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - if grep BIGenDianSyS conftest.$ac_objext >/dev/null; then - ac_cv_c_bigendian=yes - fi - if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then - if test "$ac_cv_c_bigendian" = unknown; then - ac_cv_c_bigendian=no - else - # finding both strings is unlikely to happen, but who knows? - ac_cv_c_bigendian=unknown - fi - fi -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ - - /* Are we little or big endian? From Harbison&Steele. */ - union - { - long int l; - char c[sizeof (long int)]; - } u; - u.l = 1; - return u.c[sizeof (long int) - 1] == 1; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - ac_cv_c_bigendian=no -else - ac_cv_c_bigendian=yes -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_bigendian" >&5 -$as_echo "$ac_cv_c_bigendian" >&6; } - case $ac_cv_c_bigendian in #( - yes) - $as_echo "#define WORDS_BIGENDIAN 1" >>confdefs.h -;; #( - no) - ;; #( - universal) - -$as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h - - ;; #( - *) - as_fn_error $? "unknown endianness - presetting ac_cv_c_bigendian=no (or yes) will help" "$LINENO" 5 ;; - esac - - - -#----------------------------------------------------------------------- -# __CHANGE__ -# Specify the C source files to compile in TEA_ADD_SOURCES, -# public headers that need to be installed in TEA_ADD_HEADERS, -# stub library C source files to compile in TEA_ADD_STUB_SOURCES, -# and runtime Tcl library files in TEA_ADD_TCL_SOURCES. -# This defines PKG(_STUB)_SOURCES, PKG(_STUB)_OBJECTS, PKG_HEADERS -# and PKG_TCL_SOURCES. -#----------------------------------------------------------------------- - - - vars="tls.c tlsIO.c tlsBIO.c tlsX509.c fixstrtod.c" - for i in $vars; do - case $i in - \$*) - # allow $-var names - PKG_SOURCES="$PKG_SOURCES $i" - PKG_OBJECTS="$PKG_OBJECTS $i" - ;; - *) - # check for existence - allows for generic/win/unix VPATH - # To add more dirs here (like 'src'), you have to update VPATH - # in Makefile.in as well - if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ - -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ - -a ! -f "${srcdir}/macosx/$i" \ - ; then - as_fn_error $? "could not find source file '$i'" "$LINENO" 5 - fi - PKG_SOURCES="$PKG_SOURCES $i" - # this assumes it is in a VPATH dir - i=`basename $i` - # handle user calling this before or after TEA_SETUP_COMPILER - if test x"${OBJEXT}" != x ; then - j="`echo $i | sed -e 's/\.[^.]*$//'`.${OBJEXT}" - else - j="`echo $i | sed -e 's/\.[^.]*$//'`.\${OBJEXT}" - fi - PKG_OBJECTS="$PKG_OBJECTS $j" - ;; - esac - done - - - - - vars="" - for i in $vars; do - # check for existence, be strict because it is installed - if test ! -f "${srcdir}/$i" ; then - as_fn_error $? "could not find header file '${srcdir}/$i'" "$LINENO" 5 - fi - PKG_HEADERS="$PKG_HEADERS $i" - done - - - - vars="" - for i in $vars; do - PKG_INCLUDES="$PKG_INCLUDES $i" - done - - - - vars="" - for i in $vars; do - if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then - # Convert foo.lib to -lfoo for GCC. No-op if not *.lib - i=`echo "$i" | sed -e 's/^\([^-].*\)\.lib$/-l\1/i'` - fi - PKG_LIBS="$PKG_LIBS $i" - done - - - - PKG_CFLAGS="$PKG_CFLAGS " - - - - vars="" - for i in $vars; do - # check for existence - allows for generic/win/unix VPATH - if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ - -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ - -a ! -f "${srcdir}/macosx/$i" \ - ; then - as_fn_error $? "could not find stub source file '$i'" "$LINENO" 5 - fi - PKG_STUB_SOURCES="$PKG_STUB_SOURCES $i" - # this assumes it is in a VPATH dir - i=`basename $i` - # handle user calling this before or after TEA_SETUP_COMPILER - if test x"${OBJEXT}" != x ; then - j="`echo $i | sed -e 's/\.[^.]*$//'`.${OBJEXT}" - else - j="`echo $i | sed -e 's/\.[^.]*$//'`.\${OBJEXT}" - fi - PKG_STUB_OBJECTS="$PKG_STUB_OBJECTS $j" - done - - - - - vars="tls.tcl" - for i in $vars; do - # check for existence, be strict because it is installed - if test ! -f "${srcdir}/$i" ; then - as_fn_error $? "could not find tcl source file '${srcdir}/$i'" "$LINENO" 5 - fi - PKG_TCL_SOURCES="$PKG_TCL_SOURCES $i" - done - - - -#-------------------------------------------------------------------- -# __CHANGE__ -# -# You can add more files to clean if your extension creates any extra -# files by extending CLEANFILES. -# Add pkgIndex.tcl if it is generated in the Makefile instead of ./configure -# and change Makefile.in to move it from CONFIG_CLEAN_FILES to BINARIES var. -# -# A few miscellaneous platform-specific items: -# TEA_ADD_* any platform specific compiler/build info here. -#-------------------------------------------------------------------- - -#CLEANFILES="$CLEANFILES pkgIndex.tcl" -if test "${TEA_PLATFORM}" = "windows" ; then - # Ensure no empty if clauses - : - #TEA_ADD_SOURCES([win/winFile.c]) - #TEA_ADD_INCLUDES([-I\"$(${CYGPATH} ${srcdir}/win)\"]) -else - # Ensure no empty else clauses - : - #TEA_ADD_SOURCES([unix/unixFile.c]) - #TEA_ADD_LIBS([-lsuperfly]) -fi - -#-------------------------------------------------------------------- -# __CHANGE__ -# Choose which headers you need. Extension authors should try very -# hard to only rely on the Tcl public header files. Internal headers -# contain private data structures and are subject to change without -# notice. -# This MUST be called after TEA_LOAD_TCLCONFIG / TEA_LOAD_TKCONFIG -#-------------------------------------------------------------------- - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Tcl public headers" >&5 -$as_echo_n "checking for Tcl public headers... " >&6; } - - -# Check whether --with-tclinclude was given. -if test "${with_tclinclude+set}" = set; then : - withval=$with_tclinclude; with_tclinclude=${withval} -fi - - - if ${ac_cv_c_tclh+:} false; then : - $as_echo_n "(cached) " >&6 -else - - # Use the value from --with-tclinclude, if it was given - - if test x"${with_tclinclude}" != x ; then - if test -f "${with_tclinclude}/tcl.h" ; then - ac_cv_c_tclh=${with_tclinclude} - else - as_fn_error $? "${with_tclinclude} directory does not contain tcl.h" "$LINENO" 5 - fi - else - list="" - if test "`uname -s`" = "Darwin"; then - # If Tcl was built as a framework, attempt to use - # the framework's Headers directory - case ${TCL_DEFS} in - *TCL_FRAMEWORK*) - list="`ls -d ${TCL_BIN_DIR}/Headers 2>/dev/null`" - ;; - esac - fi - - # Look in the source dir only if Tcl is not installed, - # and in that situation, look there before installed locations. - if test -f "${TCL_BIN_DIR}/Makefile" ; then - list="$list `ls -d ${TCL_SRC_DIR}/generic 2>/dev/null`" - fi - - # Check order: pkg --prefix location, Tcl's --prefix location, - # relative to directory of tclConfig.sh. - - eval "temp_includedir=${includedir}" - list="$list \ - `ls -d ${temp_includedir} 2>/dev/null` \ - `ls -d ${TCL_PREFIX}/include 2>/dev/null` \ - `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null`" - if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then - list="$list /usr/local/include /usr/include" - if test x"${TCL_INCLUDE_SPEC}" != x ; then - d=`echo "${TCL_INCLUDE_SPEC}" | sed -e 's/^-I//'` - list="$list `ls -d ${d} 2>/dev/null`" - fi - fi - for i in $list ; do - if test -f "$i/tcl.h" ; then - ac_cv_c_tclh=$i - break - fi - done - fi - -fi - - - # Print a message based on how we determined the include path - - if test x"${ac_cv_c_tclh}" = x ; then - as_fn_error $? "tcl.h not found. Please specify its location with --with-tclinclude" "$LINENO" 5 - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${ac_cv_c_tclh}" >&5 -$as_echo "${ac_cv_c_tclh}" >&6; } - fi - - # Convert to a native path and substitute into the output files. - - INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tclh}` - - TCL_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" - - - -#TEA_PRIVATE_TCL_HEADERS - -#TEA_PUBLIC_TK_HEADERS -#TEA_PRIVATE_TK_HEADERS -#TEA_PATH_X - -#-------------------------------------------------------------------- -# Check whether --enable-threads or --disable-threads was given. -# This auto-enables if Tcl was compiled threaded. -#-------------------------------------------------------------------- - - - # Check whether --enable-threads was given. -if test "${enable_threads+set}" = set; then : - enableval=$enable_threads; tcl_ok=$enableval -else - tcl_ok=yes -fi - - - if test "${enable_threads+set}" = set; then - enableval="$enable_threads" - tcl_ok=$enableval - else - tcl_ok=yes - fi - - if test "$tcl_ok" = "yes" -o "${TCL_THREADS}" = 1; then - TCL_THREADS=1 - - if test "${TEA_PLATFORM}" != "windows" ; then - # We are always OK on Windows, so check what this platform wants: - - # USE_THREAD_ALLOC tells us to try the special thread-based - # allocator that significantly reduces lock contention - -$as_echo "#define USE_THREAD_ALLOC 1" >>confdefs.h - - -$as_echo "#define _REENTRANT 1" >>confdefs.h - - if test "`uname -s`" = "SunOS" ; then - -$as_echo "#define _POSIX_PTHREAD_SEMANTICS 1" >>confdefs.h - - fi - -$as_echo "#define _THREAD_SAFE 1" >>confdefs.h - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_mutex_init in -lpthread" >&5 -$as_echo_n "checking for pthread_mutex_init in -lpthread... " >&6; } -if ${ac_cv_lib_pthread_pthread_mutex_init+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lpthread $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char pthread_mutex_init (); -int -main () -{ -return pthread_mutex_init (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_pthread_pthread_mutex_init=yes -else - ac_cv_lib_pthread_pthread_mutex_init=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pthread_pthread_mutex_init" >&5 -$as_echo "$ac_cv_lib_pthread_pthread_mutex_init" >&6; } -if test "x$ac_cv_lib_pthread_pthread_mutex_init" = xyes; then : - tcl_ok=yes -else - tcl_ok=no -fi - - if test "$tcl_ok" = "no"; then - # Check a little harder for __pthread_mutex_init in the same - # library, as some systems hide it there until pthread.h is - # defined. We could alternatively do an AC_TRY_COMPILE with - # pthread.h, but that will work with libpthread really doesn't - # exist, like AIX 4.2. [Bug: 4359] - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for __pthread_mutex_init in -lpthread" >&5 -$as_echo_n "checking for __pthread_mutex_init in -lpthread... " >&6; } -if ${ac_cv_lib_pthread___pthread_mutex_init+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lpthread $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char __pthread_mutex_init (); -int -main () -{ -return __pthread_mutex_init (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_pthread___pthread_mutex_init=yes -else - ac_cv_lib_pthread___pthread_mutex_init=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pthread___pthread_mutex_init" >&5 -$as_echo "$ac_cv_lib_pthread___pthread_mutex_init" >&6; } -if test "x$ac_cv_lib_pthread___pthread_mutex_init" = xyes; then : - tcl_ok=yes -else - tcl_ok=no -fi - - fi - - if test "$tcl_ok" = "yes"; then - # The space is needed - THREADS_LIBS=" -lpthread" - else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_mutex_init in -lpthreads" >&5 -$as_echo_n "checking for pthread_mutex_init in -lpthreads... " >&6; } -if ${ac_cv_lib_pthreads_pthread_mutex_init+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lpthreads $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char pthread_mutex_init (); -int -main () -{ -return pthread_mutex_init (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_pthreads_pthread_mutex_init=yes -else - ac_cv_lib_pthreads_pthread_mutex_init=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pthreads_pthread_mutex_init" >&5 -$as_echo "$ac_cv_lib_pthreads_pthread_mutex_init" >&6; } -if test "x$ac_cv_lib_pthreads_pthread_mutex_init" = xyes; then : - tcl_ok=yes -else - tcl_ok=no -fi - - if test "$tcl_ok" = "yes"; then - # The space is needed - THREADS_LIBS=" -lpthreads" - else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_mutex_init in -lc" >&5 -$as_echo_n "checking for pthread_mutex_init in -lc... " >&6; } -if ${ac_cv_lib_c_pthread_mutex_init+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lc $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char pthread_mutex_init (); -int -main () -{ -return pthread_mutex_init (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_c_pthread_mutex_init=yes -else - ac_cv_lib_c_pthread_mutex_init=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_c_pthread_mutex_init" >&5 -$as_echo "$ac_cv_lib_c_pthread_mutex_init" >&6; } -if test "x$ac_cv_lib_c_pthread_mutex_init" = xyes; then : - tcl_ok=yes -else - tcl_ok=no -fi - - if test "$tcl_ok" = "no"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_mutex_init in -lc_r" >&5 -$as_echo_n "checking for pthread_mutex_init in -lc_r... " >&6; } -if ${ac_cv_lib_c_r_pthread_mutex_init+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lc_r $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char pthread_mutex_init (); -int -main () -{ -return pthread_mutex_init (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_c_r_pthread_mutex_init=yes -else - ac_cv_lib_c_r_pthread_mutex_init=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_c_r_pthread_mutex_init" >&5 -$as_echo "$ac_cv_lib_c_r_pthread_mutex_init" >&6; } -if test "x$ac_cv_lib_c_r_pthread_mutex_init" = xyes; then : - tcl_ok=yes -else - tcl_ok=no -fi - - if test "$tcl_ok" = "yes"; then - # The space is needed - THREADS_LIBS=" -pthread" - else - TCL_THREADS=0 - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Do not know how to find pthread lib on your system - thread support disabled" >&5 -$as_echo "$as_me: WARNING: Do not know how to find pthread lib on your system - thread support disabled" >&2;} - fi - fi - fi - fi - fi - else - TCL_THREADS=0 - fi - # Do checking message here to not mess up interleaved configure output - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for building with threads" >&5 -$as_echo_n "checking for building with threads... " >&6; } - if test "${TCL_THREADS}" = 1; then - -$as_echo "#define TCL_THREADS 1" >>confdefs.h - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes (default)" >&5 -$as_echo "yes (default)" >&6; } - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - fi - # TCL_THREADS sanity checking. See if our request for building with - # threads is the same as the way Tcl was built. If not, warn the user. - case ${TCL_DEFS} in - *THREADS=1*) - if test "${TCL_THREADS}" = "0"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: - Building ${PACKAGE_NAME} without threads enabled, but building against Tcl - that IS thread-enabled. It is recommended to use --enable-threads." >&5 -$as_echo "$as_me: WARNING: - Building ${PACKAGE_NAME} without threads enabled, but building against Tcl - that IS thread-enabled. It is recommended to use --enable-threads." >&2;} - fi - ;; - esac - - - -#-------------------------------------------------------------------- -# The statement below defines a collection of symbols related to -# building as a shared library instead of a static library. -#-------------------------------------------------------------------- - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to build libraries" >&5 -$as_echo_n "checking how to build libraries... " >&6; } - # Check whether --enable-shared was given. -if test "${enable_shared+set}" = set; then : - enableval=$enable_shared; shared_ok=$enableval -else - shared_ok=yes -fi - - - if test "${enable_shared+set}" = set; then - enableval="$enable_shared" - shared_ok=$enableval - else - shared_ok=yes - fi - - # Check whether --enable-stubs was given. -if test "${enable_stubs+set}" = set; then : - enableval=$enable_stubs; stubs_ok=$enableval -else - stubs_ok=yes -fi - - - if test "${enable_stubs+set}" = set; then - enableval="$enable_stubs" - stubs_ok=$enableval - else - stubs_ok=yes - fi - - # Stubs are always enabled for shared builds - if test "$shared_ok" = "yes" ; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: shared" >&5 -$as_echo "shared" >&6; } - SHARED_BUILD=1 - STUBS_BUILD=1 - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: static" >&5 -$as_echo "static" >&6; } - SHARED_BUILD=0 - -$as_echo "#define STATIC_BUILD 1" >>confdefs.h - - if test "$stubs_ok" = "yes" ; then - STUBS_BUILD=1 - else - STUBS_BUILD=0 - fi - fi - if test "${STUBS_BUILD}" = "1" ; then - -$as_echo "#define USE_TCL_STUBS 1" >>confdefs.h - - -$as_echo "#define USE_TCLOO_STUBS 1" >>confdefs.h - - if test "${TEA_WINDOWINGSYSTEM}" != ""; then - -$as_echo "#define USE_TK_STUBS 1" >>confdefs.h - - fi - fi - - - - - -#-------------------------------------------------------------------- -# This macro figures out what flags to use with the compiler/linker -# when building shared/static debug/optimized objects. This information -# can be taken from the tclConfig.sh file, but this figures it all out. -#-------------------------------------------------------------------- - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_RANLIB+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -RANLIB=$ac_cv_prog_RANLIB -if test -n "$RANLIB"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 -$as_echo "$RANLIB" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_RANLIB"; then - ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_RANLIB="ranlib" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -if test -n "$ac_ct_RANLIB"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 -$as_echo "$ac_ct_RANLIB" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_RANLIB" = x; then - RANLIB=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - RANLIB=$ac_ct_RANLIB - fi -else - RANLIB="$ac_cv_prog_RANLIB" -fi - - - - - # Step 0.a: Enable 64 bit support? - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if 64bit support is requested" >&5 -$as_echo_n "checking if 64bit support is requested... " >&6; } - # Check whether --enable-64bit was given. -if test "${enable_64bit+set}" = set; then : - enableval=$enable_64bit; do64bit=$enableval -else - do64bit=no -fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $do64bit" >&5 -$as_echo "$do64bit" >&6; } - - # Step 0.b: Enable Solaris 64 bit VIS support? - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if 64bit Sparc VIS support is requested" >&5 -$as_echo_n "checking if 64bit Sparc VIS support is requested... " >&6; } - # Check whether --enable-64bit-vis was given. -if test "${enable_64bit_vis+set}" = set; then : - enableval=$enable_64bit_vis; do64bitVIS=$enableval -else - do64bitVIS=no -fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $do64bitVIS" >&5 -$as_echo "$do64bitVIS" >&6; } - # Force 64bit on with VIS - if test "$do64bitVIS" = "yes"; then : - do64bit=yes -fi - - # Step 0.c: Check if visibility support is available. Do this here so - # that platform specific alternatives can be used below if this fails. - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if compiler supports visibility \"hidden\"" >&5 -$as_echo_n "checking if compiler supports visibility \"hidden\"... " >&6; } -if ${tcl_cv_cc_visibility_hidden+:} false; then : - $as_echo_n "(cached) " >&6 -else - - hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -Werror" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - - extern __attribute__((__visibility__("hidden"))) void f(void); - void f(void) {} -int -main () -{ -f(); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - tcl_cv_cc_visibility_hidden=yes -else - tcl_cv_cc_visibility_hidden=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - CFLAGS=$hold_cflags -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_cc_visibility_hidden" >&5 -$as_echo "$tcl_cv_cc_visibility_hidden" >&6; } - if test $tcl_cv_cc_visibility_hidden = yes; then : - - -$as_echo "#define MODULE_SCOPE extern __attribute__((__visibility__(\"hidden\")))" >>confdefs.h - - -$as_echo "#define HAVE_HIDDEN 1" >>confdefs.h - - -fi - - # Step 0.d: Disable -rpath support? - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if rpath support is requested" >&5 -$as_echo_n "checking if rpath support is requested... " >&6; } - # Check whether --enable-rpath was given. -if test "${enable_rpath+set}" = set; then : - enableval=$enable_rpath; doRpath=$enableval -else - doRpath=yes -fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $doRpath" >&5 -$as_echo "$doRpath" >&6; } - - # TEA specific: Cross-compiling options for Windows/CE builds? - - if test "${TEA_PLATFORM}" = windows; then : - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if Windows/CE build is requested" >&5 -$as_echo_n "checking if Windows/CE build is requested... " >&6; } - # Check whether --enable-wince was given. -if test "${enable_wince+set}" = set; then : - enableval=$enable_wince; doWince=$enableval -else - doWince=no -fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $doWince" >&5 -$as_echo "$doWince" >&6; } - -fi - - # Set the variable "system" to hold the name and version number - # for the system. - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking system version" >&5 -$as_echo_n "checking system version... " >&6; } -if ${tcl_cv_sys_version+:} false; then : - $as_echo_n "(cached) " >&6 -else - - # TEA specific: - if test "${TEA_PLATFORM}" = "windows" ; then - tcl_cv_sys_version=windows - else - tcl_cv_sys_version=`uname -s`-`uname -r` - if test "$?" -ne 0 ; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: can't find uname command" >&5 -$as_echo "$as_me: WARNING: can't find uname command" >&2;} - tcl_cv_sys_version=unknown - else - if test "`uname -s`" = "AIX" ; then - tcl_cv_sys_version=AIX-`uname -v`.`uname -r` - fi - fi - fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_sys_version" >&5 -$as_echo "$tcl_cv_sys_version" >&6; } - system=$tcl_cv_sys_version - - - # Require ranlib early so we can override it in special cases below. - - - - # Set configuration options based on system name and version. - # This is similar to Tcl's unix/tcl.m4 except that we've added a - # "windows" case and removed some core-only vars. - - do64bit_ok=no - # default to '{$LIBS}' and set to "" on per-platform necessary basis - SHLIB_LD_LIBS='${LIBS}' - # When ld needs options to work in 64-bit mode, put them in - # LDFLAGS_ARCH so they eventually end up in LDFLAGS even if [load] - # is disabled by the user. [Bug 1016796] - LDFLAGS_ARCH="" - UNSHARED_LIB_SUFFIX="" - # TEA specific: use PACKAGE_VERSION instead of VERSION - TCL_TRIM_DOTS='`echo ${PACKAGE_VERSION} | tr -d .`' - ECHO_VERSION='`echo ${PACKAGE_VERSION}`' - TCL_LIB_VERSIONS_OK=ok - CFLAGS_DEBUG=-g - if test "$GCC" = yes; then : - - CFLAGS_OPTIMIZE=-O2 - CFLAGS_WARNING="-Wall" - -else - - CFLAGS_OPTIMIZE=-O - CFLAGS_WARNING="" - -fi - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. -set dummy ${ac_tool_prefix}ar; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_AR+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AR"; then - ac_cv_prog_AR="$AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_AR="${ac_tool_prefix}ar" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -AR=$ac_cv_prog_AR -if test -n "$AR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 -$as_echo "$AR" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_AR"; then - ac_ct_AR=$AR - # Extract the first word of "ar", so it can be a program name with args. -set dummy ar; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_AR+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_AR"; then - ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_AR="ar" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_AR=$ac_cv_prog_ac_ct_AR -if test -n "$ac_ct_AR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 -$as_echo "$ac_ct_AR" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_AR" = x; then - AR="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - AR=$ac_ct_AR - fi -else - AR="$ac_cv_prog_AR" -fi - - STLIB_LD='${AR} cr' - LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH" - if test "x$SHLIB_VERSION" = x; then : - SHLIB_VERSION="" -else - SHLIB_VERSION=".$SHLIB_VERSION" -fi - case $system in - # TEA specific: - windows) - # This is a 2-stage check to make sure we have the 64-bit SDK - # We have to know where the SDK is installed. - # This magic is based on MS Platform SDK for Win2003 SP1 - hobbs - # MACHINE is IX86 for LINK, but this is used by the manifest, - # which requires x86|amd64|ia64. - MACHINE="X86" - if test "$do64bit" != "no" ; then - if test "x${MSSDK}x" = "xx" ; then - MSSDK="C:/Progra~1/Microsoft Platform SDK" - fi - MSSDK=`echo "$MSSDK" | sed -e 's!\\\!/!g'` - PATH64="" - case "$do64bit" in - amd64|x64|yes) - MACHINE="AMD64" ; # default to AMD64 64-bit build - PATH64="${MSSDK}/Bin/Win64/x86/AMD64" - ;; - ia64) - MACHINE="IA64" - PATH64="${MSSDK}/Bin/Win64" - ;; - esac - if test "$GCC" != "yes" -a ! -d "${PATH64}" ; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Could not find 64-bit $MACHINE SDK to enable 64bit mode" >&5 -$as_echo "$as_me: WARNING: Could not find 64-bit $MACHINE SDK to enable 64bit mode" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ensure latest Platform SDK is installed" >&5 -$as_echo "$as_me: WARNING: Ensure latest Platform SDK is installed" >&2;} - do64bit="no" - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: Using 64-bit $MACHINE mode" >&5 -$as_echo " Using 64-bit $MACHINE mode" >&6; } - do64bit_ok="yes" - fi - fi - - if test "$doWince" != "no" ; then - if test "$do64bit" != "no" ; then - as_fn_error $? "Windows/CE and 64-bit builds incompatible" "$LINENO" 5 - fi - if test "$GCC" = "yes" ; then - as_fn_error $? "Windows/CE and GCC builds incompatible" "$LINENO" 5 - fi - - # First, look for one uninstalled. - # the alternative search directory is invoked by --with-celib - - if test x"${no_celib}" = x ; then - # we reset no_celib in case something fails here - no_celib=true - -# Check whether --with-celib was given. -if test "${with_celib+set}" = set; then : - withval=$with_celib; with_celibconfig=${withval} -fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Windows/CE celib directory" >&5 -$as_echo_n "checking for Windows/CE celib directory... " >&6; } - if ${ac_cv_c_celibconfig+:} false; then : - $as_echo_n "(cached) " >&6 -else - - # First check to see if --with-celibconfig was specified. - if test x"${with_celibconfig}" != x ; then - if test -d "${with_celibconfig}/inc" ; then - ac_cv_c_celibconfig=`(cd ${with_celibconfig}; pwd)` - else - as_fn_error $? "${with_celibconfig} directory doesn't contain inc directory" "$LINENO" 5 - fi - fi - - # then check for a celib library - if test x"${ac_cv_c_celibconfig}" = x ; then - for i in \ - ../celib-palm-3.0 \ - ../celib \ - ../../celib-palm-3.0 \ - ../../celib \ - `ls -dr ../celib-*3.[0-9]* 2>/dev/null` \ - ${srcdir}/../celib-palm-3.0 \ - ${srcdir}/../celib \ - `ls -dr ${srcdir}/../celib-*3.[0-9]* 2>/dev/null` \ - ; do - if test -d "$i/inc" ; then - ac_cv_c_celibconfig=`(cd $i; pwd)` - break - fi - done - fi - -fi - - if test x"${ac_cv_c_celibconfig}" = x ; then - as_fn_error $? "Cannot find celib support library directory" "$LINENO" 5 - else - no_celib= - CELIB_DIR=${ac_cv_c_celibconfig} - CELIB_DIR=`echo "$CELIB_DIR" | sed -e 's!\\\!/!g'` - { $as_echo "$as_me:${as_lineno-$LINENO}: result: found $CELIB_DIR" >&5 -$as_echo "found $CELIB_DIR" >&6; } - fi - fi - - # Set defaults for common evc4/PPC2003 setup - # Currently Tcl requires 300+, possibly 420+ for sockets - CEVERSION=420; # could be 211 300 301 400 420 ... - TARGETCPU=ARMV4; # could be ARMV4 ARM MIPS SH3 X86 ... - ARCH=ARM; # could be ARM MIPS X86EM ... - PLATFORM="Pocket PC 2003"; # or "Pocket PC 2002" - if test "$doWince" != "yes"; then - # If !yes then the user specified something - # Reset ARCH to allow user to skip specifying it - ARCH= - eval `echo $doWince | awk -F, '{ \ - if (length($1)) { printf "CEVERSION=\"%s\"\n", $1; \ - if ($1 < 400) { printf "PLATFORM=\"Pocket PC 2002\"\n" } }; \ - if (length($2)) { printf "TARGETCPU=\"%s\"\n", toupper($2) }; \ - if (length($3)) { printf "ARCH=\"%s\"\n", toupper($3) }; \ - if (length($4)) { printf "PLATFORM=\"%s\"\n", $4 }; \ - }'` - if test "x${ARCH}" = "x" ; then - ARCH=$TARGETCPU; - fi - fi - OSVERSION=WCE$CEVERSION; - if test "x${WCEROOT}" = "x" ; then - WCEROOT="C:/Program Files/Microsoft eMbedded C++ 4.0" - if test ! -d "${WCEROOT}" ; then - WCEROOT="C:/Program Files/Microsoft eMbedded Tools" - fi - fi - if test "x${SDKROOT}" = "x" ; then - SDKROOT="C:/Program Files/Windows CE Tools" - if test ! -d "${SDKROOT}" ; then - SDKROOT="C:/Windows CE Tools" - fi - fi - WCEROOT=`echo "$WCEROOT" | sed -e 's!\\\!/!g'` - SDKROOT=`echo "$SDKROOT" | sed -e 's!\\\!/!g'` - if test ! -d "${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" \ - -o ! -d "${WCEROOT}/EVC/${OSVERSION}/bin"; then - as_fn_error $? "could not find PocketPC SDK or target compiler to enable WinCE mode $CEVERSION,$TARGETCPU,$ARCH,$PLATFORM" "$LINENO" 5 - doWince="no" - else - # We could PATH_NOSPACE these, but that's not important, - # as long as we quote them when used. - CEINCLUDE="${SDKROOT}/${OSVERSION}/${PLATFORM}/include" - if test -d "${CEINCLUDE}/${TARGETCPU}" ; then - CEINCLUDE="${CEINCLUDE}/${TARGETCPU}" - fi - CELIBPATH="${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" - fi - fi - - if test "$GCC" != "yes" ; then - if test "${SHARED_BUILD}" = "0" ; then - runtime=-MT - else - runtime=-MD - fi - case "x`echo \${VisualStudioVersion}`" in - x1[4-9]*) - lflags="${lflags} -nodefaultlib:libucrt.lib" - - vars="ucrt.lib" - for i in $vars; do - if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then - # Convert foo.lib to -lfoo for GCC. No-op if not *.lib - i=`echo "$i" | sed -e 's/^\([^-].*\)\.lib$/-l\1/i'` - fi - PKG_LIBS="$PKG_LIBS $i" - done - - - ;; - *) - ;; - esac - - if test "$do64bit" != "no" ; then - # All this magic is necessary for the Win64 SDK RC1 - hobbs - CC="\"${PATH64}/cl.exe\"" - CFLAGS="${CFLAGS} -I\"${MSSDK}/Include\" -I\"${MSSDK}/Include/crt\" -I\"${MSSDK}/Include/crt/sys\"" - RC="\"${MSSDK}/bin/rc.exe\"" - lflags="${lflags} -nologo -MACHINE:${MACHINE} -LIBPATH:\"${MSSDK}/Lib/${MACHINE}\"" - LINKBIN="\"${PATH64}/link.exe\"" - CFLAGS_DEBUG="-nologo -Zi -Od -W3 ${runtime}d" - CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}" - # Avoid 'unresolved external symbol __security_cookie' - # errors, c.f. http://support.microsoft.com/?id=894573 - - vars="bufferoverflowU.lib" - for i in $vars; do - if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then - # Convert foo.lib to -lfoo for GCC. No-op if not *.lib - i=`echo "$i" | sed -e 's/^\([^-].*\)\.lib$/-l\1/i'` - fi - PKG_LIBS="$PKG_LIBS $i" - done - - - elif test "$doWince" != "no" ; then - CEBINROOT="${WCEROOT}/EVC/${OSVERSION}/bin" - if test "${TARGETCPU}" = "X86"; then - CC="\"${CEBINROOT}/cl.exe\"" - else - CC="\"${CEBINROOT}/cl${ARCH}.exe\"" - fi - CFLAGS="$CFLAGS -I\"${CELIB_DIR}/inc\" -I\"${CEINCLUDE}\"" - RC="\"${WCEROOT}/Common/EVC/bin/rc.exe\"" - arch=`echo ${ARCH} | awk '{print tolower($0)}'` - defs="${ARCH} _${ARCH}_ ${arch} PALM_SIZE _MT _WINDOWS" - if test "${SHARED_BUILD}" = "1" ; then - # Static CE builds require static celib as well - defs="${defs} _DLL" - fi - for i in $defs ; do - -cat >>confdefs.h <<_ACEOF -#define $i 1 -_ACEOF - - done - -cat >>confdefs.h <<_ACEOF -#define _WIN32_WCE $CEVERSION -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define UNDER_CE $CEVERSION -_ACEOF - - CFLAGS_DEBUG="-nologo -Zi -Od" - CFLAGS_OPTIMIZE="-nologo -Ox" - lversion=`echo ${CEVERSION} | sed -e 's/\(.\)\(..\)/\1\.\2/'` - lflags="${lflags} -MACHINE:${ARCH} -LIBPATH:\"${CELIBPATH}\" -subsystem:windowsce,${lversion} -nologo" - LINKBIN="\"${CEBINROOT}/link.exe\"" - - else - RC="rc" - lflags="${lflags} -nologo" - LINKBIN="link" - CFLAGS_DEBUG="-nologo -Z7 -Od -W3 -WX ${runtime}d" - CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}" - fi - fi - - if test "$GCC" = "yes"; then - # mingw gcc mode - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}windres", so it can be a program name with args. -set dummy ${ac_tool_prefix}windres; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_RC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$RC"; then - ac_cv_prog_RC="$RC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_RC="${ac_tool_prefix}windres" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -RC=$ac_cv_prog_RC -if test -n "$RC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RC" >&5 -$as_echo "$RC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_RC"; then - ac_ct_RC=$RC - # Extract the first word of "windres", so it can be a program name with args. -set dummy windres; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_RC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_RC"; then - ac_cv_prog_ac_ct_RC="$ac_ct_RC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_RC="windres" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_RC=$ac_cv_prog_ac_ct_RC -if test -n "$ac_ct_RC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RC" >&5 -$as_echo "$ac_ct_RC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_RC" = x; then - RC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - RC=$ac_ct_RC - fi -else - RC="$ac_cv_prog_RC" -fi - - CFLAGS_DEBUG="-g" - CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer" - SHLIB_LD='${CC} -shared' - UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' - LDFLAGS_CONSOLE="-wl,--subsystem,console ${lflags}" - LDFLAGS_WINDOW="-wl,--subsystem,windows ${lflags}" - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for cross-compile version of gcc" >&5 -$as_echo_n "checking for cross-compile version of gcc... " >&6; } -if ${ac_cv_cross+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - - #ifdef _WIN32 - #error cross-compiler - #endif - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_cross=yes -else - ac_cv_cross=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cross" >&5 -$as_echo "$ac_cv_cross" >&6; } - if test "$ac_cv_cross" = "yes"; then - case "$do64bit" in - amd64|x64|yes) - CC="x86_64-w64-mingw32-gcc" - LD="x86_64-w64-mingw32-ld" - AR="x86_64-w64-mingw32-ar" - RANLIB="x86_64-w64-mingw32-ranlib" - RC="x86_64-w64-mingw32-windres" - ;; - *) - CC="i686-w64-mingw32-gcc" - LD="i686-w64-mingw32-ld" - AR="i686-w64-mingw32-ar" - RANLIB="i686-w64-mingw32-ranlib" - RC="i686-w64-mingw32-windres" - ;; - esac - fi - - else - SHLIB_LD="${LINKBIN} -dll ${lflags}" - # link -lib only works when -lib is the first arg - STLIB_LD="${LINKBIN} -lib ${lflags}" - UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.lib' - PATHTYPE=-w - # For information on what debugtype is most useful, see: - # http://msdn.microsoft.com/library/en-us/dnvc60/html/gendepdebug.asp - # and also - # http://msdn2.microsoft.com/en-us/library/y0zzbyt4%28VS.80%29.aspx - # This essentially turns it all on. - LDFLAGS_DEBUG="-debug -debugtype:cv" - LDFLAGS_OPTIMIZE="-release" - if test "$doWince" != "no" ; then - LDFLAGS_CONSOLE="-link ${lflags}" - LDFLAGS_WINDOW=${LDFLAGS_CONSOLE} - else - LDFLAGS_CONSOLE="-link -subsystem:console ${lflags}" - LDFLAGS_WINDOW="-link -subsystem:windows ${lflags}" - fi - fi - - SHLIB_SUFFIX=".dll" - SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.dll' - - TCL_LIB_VERSIONS_OK=nodots - ;; - AIX-*) - if test "${TCL_THREADS}" = "1" -a "$GCC" != "yes"; then : - - # AIX requires the _r compiler when gcc isn't being used - case "${CC}" in - *_r|*_r\ *) - # ok ... - ;; - *) - # Make sure only first arg gets _r - CC=`echo "$CC" | sed -e 's/^\([^ ]*\)/\1_r/'` - ;; - esac - { $as_echo "$as_me:${as_lineno-$LINENO}: result: Using $CC for compiling with threads" >&5 -$as_echo "Using $CC for compiling with threads" >&6; } - -fi - LIBS="$LIBS -lc" - SHLIB_CFLAGS="" - SHLIB_SUFFIX=".so" - - LD_LIBRARY_PATH_VAR="LIBPATH" - - # Check to enable 64-bit flags for compiler/linker - if test "$do64bit" = yes; then : - - if test "$GCC" = yes; then : - - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 64bit mode not supported with GCC on $system" >&5 -$as_echo "$as_me: WARNING: 64bit mode not supported with GCC on $system" >&2;} - -else - - do64bit_ok=yes - CFLAGS="$CFLAGS -q64" - LDFLAGS_ARCH="-q64" - RANLIB="${RANLIB} -X64" - AR="${AR} -X64" - SHLIB_LD_FLAGS="-b64" - -fi - -fi - - if test "`uname -m`" = ia64; then : - - # AIX-5 uses ELF style dynamic libraries on IA-64, but not PPC - SHLIB_LD="/usr/ccs/bin/ld -G -z text" - if test "$GCC" = yes; then : - - CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' - -else - - CC_SEARCH_FLAGS='-R${LIB_RUNTIME_DIR}' - -fi - LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' - -else - - if test "$GCC" = yes; then : - - SHLIB_LD='${CC} -shared -Wl,-bexpall' - -else - - SHLIB_LD="/bin/ld -bhalt:4 -bM:SRE -bexpall -H512 -T512 -bnoentry" - LDFLAGS="$LDFLAGS -brtl" - -fi - SHLIB_LD="${SHLIB_LD} ${SHLIB_LD_FLAGS}" - CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - -fi - ;; - BeOS*) - SHLIB_CFLAGS="-fPIC" - SHLIB_LD='${CC} -nostart' - SHLIB_SUFFIX=".so" - - #----------------------------------------------------------- - # Check for inet_ntoa in -lbind, for BeOS (which also needs - # -lsocket, even if the network functions are in -lnet which - # is always linked to, for compatibility. - #----------------------------------------------------------- - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for inet_ntoa in -lbind" >&5 -$as_echo_n "checking for inet_ntoa in -lbind... " >&6; } -if ${ac_cv_lib_bind_inet_ntoa+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lbind $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char inet_ntoa (); -int -main () -{ -return inet_ntoa (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_bind_inet_ntoa=yes -else - ac_cv_lib_bind_inet_ntoa=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_bind_inet_ntoa" >&5 -$as_echo "$ac_cv_lib_bind_inet_ntoa" >&6; } -if test "x$ac_cv_lib_bind_inet_ntoa" = xyes; then : - LIBS="$LIBS -lbind -lsocket" -fi - - ;; - BSD/OS-4.*) - SHLIB_CFLAGS="-export-dynamic -fPIC" - SHLIB_LD='${CC} -shared' - SHLIB_SUFFIX=".so" - LDFLAGS="$LDFLAGS -export-dynamic" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - ;; - CYGWIN_*) - SHLIB_CFLAGS="" - SHLIB_LD='${CC} -shared' - SHLIB_LD_LIBS="${SHLIB_LD_LIBS} -Wl,--out-implib,\$@.a" - SHLIB_SUFFIX=".dll" - EXEEXT=".exe" - do64bit_ok=yes - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - ;; - Haiku*) - LDFLAGS="$LDFLAGS -Wl,--export-dynamic" - SHLIB_CFLAGS="-fPIC" - SHLIB_SUFFIX=".so" - SHLIB_LD='${CC} ${CFLAGS} ${LDFLAGS} -shared' - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for inet_ntoa in -lnetwork" >&5 -$as_echo_n "checking for inet_ntoa in -lnetwork... " >&6; } -if ${ac_cv_lib_network_inet_ntoa+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lnetwork $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char inet_ntoa (); -int -main () -{ -return inet_ntoa (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_network_inet_ntoa=yes -else - ac_cv_lib_network_inet_ntoa=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_network_inet_ntoa" >&5 -$as_echo "$ac_cv_lib_network_inet_ntoa" >&6; } -if test "x$ac_cv_lib_network_inet_ntoa" = xyes; then : - LIBS="$LIBS -lnetwork" -fi - - ;; - HP-UX-*.11.*) - # Use updated header definitions where possible - -$as_echo "#define _XOPEN_SOURCE_EXTENDED 1" >>confdefs.h - - # TEA specific: Needed by Tcl, but not most extensions - #AC_DEFINE(_XOPEN_SOURCE, 1, [Do we want to use the XOPEN network library?]) - #LIBS="$LIBS -lxnet" # Use the XOPEN network library - - if test "`uname -m`" = ia64; then : - - SHLIB_SUFFIX=".so" - # Use newer C++ library for C++ extensions - #if test "$GCC" != "yes" ; then - # CPPFLAGS="-AA" - #fi - -else - - SHLIB_SUFFIX=".sl" - -fi - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 -$as_echo_n "checking for shl_load in -ldld... " >&6; } -if ${ac_cv_lib_dld_shl_load+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char shl_load (); -int -main () -{ -return shl_load (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dld_shl_load=yes -else - ac_cv_lib_dld_shl_load=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 -$as_echo "$ac_cv_lib_dld_shl_load" >&6; } -if test "x$ac_cv_lib_dld_shl_load" = xyes; then : - tcl_ok=yes -else - tcl_ok=no -fi - - if test "$tcl_ok" = yes; then : - - LDFLAGS="$LDFLAGS -Wl,-E" - CC_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.' - LD_SEARCH_FLAGS='+s +b ${LIB_RUNTIME_DIR}:.' - LD_LIBRARY_PATH_VAR="SHLIB_PATH" - -fi - if test "$GCC" = yes; then : - - SHLIB_LD='${CC} -shared' - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - -else - - CFLAGS="$CFLAGS -z" - # Users may want PA-RISC 1.1/2.0 portable code - needs HP cc - #CFLAGS="$CFLAGS +DAportable" - SHLIB_CFLAGS="+z" - SHLIB_LD="ld -b" - -fi - - # Check to enable 64-bit flags for compiler/linker - if test "$do64bit" = "yes"; then : - - if test "$GCC" = yes; then : - - case `${CC} -dumpmachine` in - hppa64*) - # 64-bit gcc in use. Fix flags for GNU ld. - do64bit_ok=yes - SHLIB_LD='${CC} -shared' - if test $doRpath = yes; then : - - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' -fi - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - ;; - *) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 64bit mode not supported with GCC on $system" >&5 -$as_echo "$as_me: WARNING: 64bit mode not supported with GCC on $system" >&2;} - ;; - esac - -else - - do64bit_ok=yes - CFLAGS="$CFLAGS +DD64" - LDFLAGS_ARCH="+DD64" - -fi - -fi ;; - IRIX-6.*) - SHLIB_CFLAGS="" - SHLIB_LD="ld -n32 -shared -rdata_shared" - SHLIB_SUFFIX=".so" - if test $doRpath = yes; then : - - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' -fi - if test "$GCC" = yes; then : - - CFLAGS="$CFLAGS -mabi=n32" - LDFLAGS="$LDFLAGS -mabi=n32" - -else - - case $system in - IRIX-6.3) - # Use to build 6.2 compatible binaries on 6.3. - CFLAGS="$CFLAGS -n32 -D_OLD_TERMIOS" - ;; - *) - CFLAGS="$CFLAGS -n32" - ;; - esac - LDFLAGS="$LDFLAGS -n32" - -fi - ;; - IRIX64-6.*) - SHLIB_CFLAGS="" - SHLIB_LD="ld -n32 -shared -rdata_shared" - SHLIB_SUFFIX=".so" - if test $doRpath = yes; then : - - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' -fi - - # Check to enable 64-bit flags for compiler/linker - - if test "$do64bit" = yes; then : - - if test "$GCC" = yes; then : - - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 64bit mode not supported by gcc" >&5 -$as_echo "$as_me: WARNING: 64bit mode not supported by gcc" >&2;} - -else - - do64bit_ok=yes - SHLIB_LD="ld -64 -shared -rdata_shared" - CFLAGS="$CFLAGS -64" - LDFLAGS_ARCH="-64" - -fi - -fi - ;; - Linux*|GNU*|NetBSD-Debian) - SHLIB_CFLAGS="-fPIC" - SHLIB_SUFFIX=".so" - - # TEA specific: - CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer" - - # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS - SHLIB_LD='${CC} ${CFLAGS} ${LDFLAGS_DEFAULT} -shared' - LDFLAGS="$LDFLAGS -Wl,--export-dynamic" - if test $doRpath = yes; then : - - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' -fi - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - if test "`uname -m`" = "alpha"; then : - CFLAGS="$CFLAGS -mieee" -fi - if test $do64bit = yes; then : - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if compiler accepts -m64 flag" >&5 -$as_echo_n "checking if compiler accepts -m64 flag... " >&6; } -if ${tcl_cv_cc_m64+:} false; then : - $as_echo_n "(cached) " >&6 -else - - hold_cflags=$CFLAGS - CFLAGS="$CFLAGS -m64" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - tcl_cv_cc_m64=yes -else - tcl_cv_cc_m64=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - CFLAGS=$hold_cflags -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_cc_m64" >&5 -$as_echo "$tcl_cv_cc_m64" >&6; } - if test $tcl_cv_cc_m64 = yes; then : - - CFLAGS="$CFLAGS -m64" - do64bit_ok=yes - -fi - -fi - - # The combo of gcc + glibc has a bug related to inlining of - # functions like strtod(). The -fno-builtin flag should address - # this problem but it does not work. The -fno-inline flag is kind - # of overkill but it works. Disable inlining only when one of the - # files in compat/*.c is being linked in. - - if test x"${USE_COMPAT}" != x; then : - CFLAGS="$CFLAGS -fno-inline" -fi - ;; - Lynx*) - SHLIB_CFLAGS="-fPIC" - SHLIB_SUFFIX=".so" - CFLAGS_OPTIMIZE=-02 - SHLIB_LD='${CC} -shared' - LD_FLAGS="-Wl,--export-dynamic" - if test $doRpath = yes; then : - - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' -fi - ;; - OpenBSD-*) - arch=`arch -s` - case "$arch" in - alpha|sparc64) - SHLIB_CFLAGS="-fPIC" - ;; - *) - SHLIB_CFLAGS="-fpic" - ;; - esac - SHLIB_LD='${CC} ${SHLIB_CFLAGS} -shared' - SHLIB_SUFFIX=".so" - if test $doRpath = yes; then : - - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' -fi - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so${SHLIB_VERSION}' - LDFLAGS="-Wl,-export-dynamic" - CFLAGS_OPTIMIZE="-O2" - if test "${TCL_THREADS}" = "1"; then : - - # On OpenBSD: Compile with -pthread - # Don't link with -lpthread - LIBS=`echo $LIBS | sed s/-lpthread//` - CFLAGS="$CFLAGS -pthread" - -fi - # OpenBSD doesn't do version numbers with dots. - UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' - TCL_LIB_VERSIONS_OK=nodots - ;; - NetBSD-*) - # NetBSD has ELF and can use 'cc -shared' to build shared libs - SHLIB_CFLAGS="-fPIC" - SHLIB_LD='${CC} ${SHLIB_CFLAGS} -shared' - SHLIB_SUFFIX=".so" - LDFLAGS="$LDFLAGS -export-dynamic" - if test $doRpath = yes; then : - - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' -fi - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - if test "${TCL_THREADS}" = "1"; then : - - # The -pthread needs to go in the CFLAGS, not LIBS - LIBS=`echo $LIBS | sed s/-pthread//` - CFLAGS="$CFLAGS -pthread" - LDFLAGS="$LDFLAGS -pthread" - -fi - ;; - DragonFly-*|FreeBSD-*) - # This configuration from FreeBSD Ports. - SHLIB_CFLAGS="-fPIC" - SHLIB_LD="${CC} -shared" - SHLIB_LD_LIBS="${SHLIB_LD_LIBS} -Wl,-soname,\$@" - SHLIB_SUFFIX=".so" - LDFLAGS="" - if test $doRpath = yes; then : - - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' -fi - if test "${TCL_THREADS}" = "1"; then : - - # The -pthread needs to go in the LDFLAGS, not LIBS - LIBS=`echo $LIBS | sed s/-pthread//` - CFLAGS="$CFLAGS $PTHREAD_CFLAGS" - LDFLAGS="$LDFLAGS $PTHREAD_LIBS" -fi - case $system in - FreeBSD-3.*) - # Version numbers are dot-stripped by system policy. - TCL_TRIM_DOTS=`echo ${PACKAGE_VERSION} | tr -d .` - UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' - SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1' - TCL_LIB_VERSIONS_OK=nodots - ;; - esac - ;; - Darwin-*) - CFLAGS_OPTIMIZE="-Os" - SHLIB_CFLAGS="-fno-common" - # To avoid discrepancies between what headers configure sees during - # preprocessing tests and compiling tests, move any -isysroot and - # -mmacosx-version-min flags from CFLAGS to CPPFLAGS: - CPPFLAGS="${CPPFLAGS} `echo " ${CFLAGS}" | \ - awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \ - if ($i~/^(isysroot|mmacosx-version-min)/) print "-"$i}'`" - CFLAGS="`echo " ${CFLAGS}" | \ - awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \ - if (!($i~/^(isysroot|mmacosx-version-min)/)) print "-"$i}'`" - if test $do64bit = yes; then : - - case `arch` in - ppc) - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if compiler accepts -arch ppc64 flag" >&5 -$as_echo_n "checking if compiler accepts -arch ppc64 flag... " >&6; } -if ${tcl_cv_cc_arch_ppc64+:} false; then : - $as_echo_n "(cached) " >&6 -else - - hold_cflags=$CFLAGS - CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - tcl_cv_cc_arch_ppc64=yes -else - tcl_cv_cc_arch_ppc64=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - CFLAGS=$hold_cflags -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_cc_arch_ppc64" >&5 -$as_echo "$tcl_cv_cc_arch_ppc64" >&6; } - if test $tcl_cv_cc_arch_ppc64 = yes; then : - - CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5" - do64bit_ok=yes - -fi;; - i386) - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if compiler accepts -arch x86_64 flag" >&5 -$as_echo_n "checking if compiler accepts -arch x86_64 flag... " >&6; } -if ${tcl_cv_cc_arch_x86_64+:} false; then : - $as_echo_n "(cached) " >&6 -else - - hold_cflags=$CFLAGS - CFLAGS="$CFLAGS -arch x86_64" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - tcl_cv_cc_arch_x86_64=yes -else - tcl_cv_cc_arch_x86_64=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - CFLAGS=$hold_cflags -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_cc_arch_x86_64" >&5 -$as_echo "$tcl_cv_cc_arch_x86_64" >&6; } - if test $tcl_cv_cc_arch_x86_64 = yes; then : - - CFLAGS="$CFLAGS -arch x86_64" - do64bit_ok=yes - -fi;; - *) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Don't know how enable 64-bit on architecture \`arch\`" >&5 -$as_echo "$as_me: WARNING: Don't know how enable 64-bit on architecture \`arch\`" >&2;};; - esac - -else - - # Check for combined 32-bit and 64-bit fat build - if echo "$CFLAGS " |grep -E -q -- '-arch (ppc64|x86_64) ' \ - && echo "$CFLAGS " |grep -E -q -- '-arch (ppc|i386) '; then : - - fat_32_64=yes -fi - -fi - # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS - SHLIB_LD='${CC} -dynamiclib ${CFLAGS} ${LDFLAGS_DEFAULT}' - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if ld accepts -single_module flag" >&5 -$as_echo_n "checking if ld accepts -single_module flag... " >&6; } -if ${tcl_cv_ld_single_module+:} false; then : - $as_echo_n "(cached) " >&6 -else - - hold_ldflags=$LDFLAGS - LDFLAGS="$LDFLAGS -dynamiclib -Wl,-single_module" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -int i; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - tcl_cv_ld_single_module=yes -else - tcl_cv_ld_single_module=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$hold_ldflags -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_ld_single_module" >&5 -$as_echo "$tcl_cv_ld_single_module" >&6; } - if test $tcl_cv_ld_single_module = yes; then : - - SHLIB_LD="${SHLIB_LD} -Wl,-single_module" - -fi - # TEA specific: link shlib with current and compatibility version flags - vers=`echo ${PACKAGE_VERSION} | sed -e 's/^\([0-9]\{1,5\}\)\(\(\.[0-9]\{1,3\}\)\{0,2\}\).*$/\1\2/p' -e d` - SHLIB_LD="${SHLIB_LD} -current_version ${vers:-0} -compatibility_version ${vers:-0}" - SHLIB_SUFFIX=".dylib" - # Don't use -prebind when building for Mac OS X 10.4 or later only: - if test "`echo "${MACOSX_DEPLOYMENT_TARGET}" | awk -F '10\\.' '{print int($2)}'`" -lt 4 -a \ - "`echo "${CPPFLAGS}" | awk -F '-mmacosx-version-min=10\\.' '{print int($2)}'`" -lt 4; then : - - LDFLAGS="$LDFLAGS -prebind" -fi - LDFLAGS="$LDFLAGS -headerpad_max_install_names" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if ld accepts -search_paths_first flag" >&5 -$as_echo_n "checking if ld accepts -search_paths_first flag... " >&6; } -if ${tcl_cv_ld_search_paths_first+:} false; then : - $as_echo_n "(cached) " >&6 -else - - hold_ldflags=$LDFLAGS - LDFLAGS="$LDFLAGS -Wl,-search_paths_first" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -int i; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - tcl_cv_ld_search_paths_first=yes -else - tcl_cv_ld_search_paths_first=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$hold_ldflags -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_ld_search_paths_first" >&5 -$as_echo "$tcl_cv_ld_search_paths_first" >&6; } - if test $tcl_cv_ld_search_paths_first = yes; then : - - LDFLAGS="$LDFLAGS -Wl,-search_paths_first" - -fi - if test "$tcl_cv_cc_visibility_hidden" != yes; then : - - -$as_echo "#define MODULE_SCOPE __private_extern__" >>confdefs.h - - tcl_cv_cc_visibility_hidden=yes - -fi - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - LD_LIBRARY_PATH_VAR="DYLD_LIBRARY_PATH" - # TEA specific: for combined 32 & 64 bit fat builds of Tk - # extensions, verify that 64-bit build is possible. - if test "$fat_32_64" = yes && test -n "${TK_BIN_DIR}"; then : - - if test "${TEA_WINDOWINGSYSTEM}" = x11; then : - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for 64-bit X11" >&5 -$as_echo_n "checking for 64-bit X11... " >&6; } -if ${tcl_cv_lib_x11_64+:} false; then : - $as_echo_n "(cached) " >&6 -else - - for v in CFLAGS CPPFLAGS LDFLAGS; do - eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc / /g" -e "s/-arch i386 / /g"`"' - done - CPPFLAGS="$CPPFLAGS -I/usr/X11R6/include" - LDFLAGS="$LDFLAGS -L/usr/X11R6/lib -lX11" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -XrmInitialize(); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - tcl_cv_lib_x11_64=yes -else - tcl_cv_lib_x11_64=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - for v in CFLAGS CPPFLAGS LDFLAGS; do - eval $v'="$hold_'$v'"' - done -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_lib_x11_64" >&5 -$as_echo "$tcl_cv_lib_x11_64" >&6; } - -fi - if test "${TEA_WINDOWINGSYSTEM}" = aqua; then : - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for 64-bit Tk" >&5 -$as_echo_n "checking for 64-bit Tk... " >&6; } -if ${tcl_cv_lib_tk_64+:} false; then : - $as_echo_n "(cached) " >&6 -else - - for v in CFLAGS CPPFLAGS LDFLAGS; do - eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc / /g" -e "s/-arch i386 / /g"`"' - done - CPPFLAGS="$CPPFLAGS -DUSE_TCL_STUBS=1 -DUSE_TK_STUBS=1 ${TCL_INCLUDES} ${TK_INCLUDES}" - LDFLAGS="$LDFLAGS ${TCL_STUB_LIB_SPEC} ${TK_STUB_LIB_SPEC}" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -Tk_InitStubs(NULL, "", 0); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - tcl_cv_lib_tk_64=yes -else - tcl_cv_lib_tk_64=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - for v in CFLAGS CPPFLAGS LDFLAGS; do - eval $v'="$hold_'$v'"' - done -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_lib_tk_64" >&5 -$as_echo "$tcl_cv_lib_tk_64" >&6; } - -fi - # remove 64-bit arch flags from CFLAGS et al. if configuration - # does not support 64-bit. - if test "$tcl_cv_lib_tk_64" = no -o "$tcl_cv_lib_x11_64" = no; then : - - { $as_echo "$as_me:${as_lineno-$LINENO}: Removing 64-bit architectures from compiler & linker flags" >&5 -$as_echo "$as_me: Removing 64-bit architectures from compiler & linker flags" >&6;} - for v in CFLAGS CPPFLAGS LDFLAGS; do - eval $v'="`echo "$'$v' "|sed -e "s/-arch ppc64 / /g" -e "s/-arch x86_64 / /g"`"' - done -fi - -fi - ;; - OS/390-*) - CFLAGS_OPTIMIZE="" # Optimizer is buggy - -$as_echo "#define _OE_SOCKETS 1" >>confdefs.h - - ;; - OSF1-V*) - # Digital OSF/1 - SHLIB_CFLAGS="" - if test "$SHARED_BUILD" = 1; then : - - SHLIB_LD='ld -shared -expect_unresolved "*"' - -else - - SHLIB_LD='ld -non_shared -expect_unresolved "*"' - -fi - SHLIB_SUFFIX=".so" - if test $doRpath = yes; then : - - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' -fi - if test "$GCC" = yes; then : - CFLAGS="$CFLAGS -mieee" -else - - CFLAGS="$CFLAGS -DHAVE_TZSET -std1 -ieee" -fi - # see pthread_intro(3) for pthread support on osf1, k.furukawa - if test "${TCL_THREADS}" = 1; then : - - CFLAGS="$CFLAGS -DHAVE_PTHREAD_ATTR_SETSTACKSIZE" - CFLAGS="$CFLAGS -DTCL_THREAD_STACK_MIN=PTHREAD_STACK_MIN*64" - LIBS=`echo $LIBS | sed s/-lpthreads//` - if test "$GCC" = yes; then : - - LIBS="$LIBS -lpthread -lmach -lexc" - -else - - CFLAGS="$CFLAGS -pthread" - LDFLAGS="$LDFLAGS -pthread" - -fi - -fi - ;; - QNX-6*) - # QNX RTP - # This may work for all QNX, but it was only reported for v6. - SHLIB_CFLAGS="-fPIC" - SHLIB_LD="ld -Bshareable -x" - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - ;; - SCO_SV-3.2*) - if test "$GCC" = yes; then : - - SHLIB_CFLAGS="-fPIC -melf" - LDFLAGS="$LDFLAGS -melf -Wl,-Bexport" - -else - - SHLIB_CFLAGS="-Kpic -belf" - LDFLAGS="$LDFLAGS -belf -Wl,-Bexport" - -fi - SHLIB_LD="ld -G" - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - ;; - SunOS-5.[0-6]) - # Careful to not let 5.10+ fall into this case - - # Note: If _REENTRANT isn't defined, then Solaris - # won't define thread-safe library routines. - - -$as_echo "#define _REENTRANT 1" >>confdefs.h - - -$as_echo "#define _POSIX_PTHREAD_SEMANTICS 1" >>confdefs.h - - - SHLIB_CFLAGS="-KPIC" - SHLIB_SUFFIX=".so" - if test "$GCC" = yes; then : - - SHLIB_LD='${CC} -shared' - CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - -else - - SHLIB_LD="/usr/ccs/bin/ld -G -z text" - CC_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - -fi - ;; - SunOS-5*) - # Note: If _REENTRANT isn't defined, then Solaris - # won't define thread-safe library routines. - - -$as_echo "#define _REENTRANT 1" >>confdefs.h - - -$as_echo "#define _POSIX_PTHREAD_SEMANTICS 1" >>confdefs.h - - - SHLIB_CFLAGS="-KPIC" - - # Check to enable 64-bit flags for compiler/linker - if test "$do64bit" = yes; then : - - arch=`isainfo` - if test "$arch" = "sparcv9 sparc"; then : - - if test "$GCC" = yes; then : - - if test "`${CC} -dumpversion | awk -F. '{print $1}'`" -lt 3; then : - - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 64bit mode not supported with GCC < 3.2 on $system" >&5 -$as_echo "$as_me: WARNING: 64bit mode not supported with GCC < 3.2 on $system" >&2;} - -else - - do64bit_ok=yes - CFLAGS="$CFLAGS -m64 -mcpu=v9" - LDFLAGS="$LDFLAGS -m64 -mcpu=v9" - SHLIB_CFLAGS="-fPIC" - -fi - -else - - do64bit_ok=yes - if test "$do64bitVIS" = yes; then : - - CFLAGS="$CFLAGS -xarch=v9a" - LDFLAGS_ARCH="-xarch=v9a" - -else - - CFLAGS="$CFLAGS -xarch=v9" - LDFLAGS_ARCH="-xarch=v9" - -fi - # Solaris 64 uses this as well - #LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH_64" - -fi - -else - if test "$arch" = "amd64 i386"; then : - - if test "$GCC" = yes; then : - - case $system in - SunOS-5.1[1-9]*|SunOS-5.[2-9][0-9]*) - do64bit_ok=yes - CFLAGS="$CFLAGS -m64" - LDFLAGS="$LDFLAGS -m64";; - *) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 64bit mode not supported with GCC on $system" >&5 -$as_echo "$as_me: WARNING: 64bit mode not supported with GCC on $system" >&2;};; - esac - -else - - do64bit_ok=yes - case $system in - SunOS-5.1[1-9]*|SunOS-5.[2-9][0-9]*) - CFLAGS="$CFLAGS -m64" - LDFLAGS="$LDFLAGS -m64";; - *) - CFLAGS="$CFLAGS -xarch=amd64" - LDFLAGS="$LDFLAGS -xarch=amd64";; - esac - -fi - -else - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 64bit mode not supported for $arch" >&5 -$as_echo "$as_me: WARNING: 64bit mode not supported for $arch" >&2;} -fi -fi - -fi - - SHLIB_SUFFIX=".so" - if test "$GCC" = yes; then : - - SHLIB_LD='${CC} -shared' - CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - if test "$do64bit_ok" = yes; then : - - if test "$arch" = "sparcv9 sparc"; then : - - # We need to specify -static-libgcc or we need to - # add the path to the sparv9 libgcc. - # JH: static-libgcc is necessary for core Tcl, but may - # not be necessary for extensions. - SHLIB_LD="$SHLIB_LD -m64 -mcpu=v9 -static-libgcc" - # for finding sparcv9 libgcc, get the regular libgcc - # path, remove so name and append 'sparcv9' - #v9gcclibdir="`gcc -print-file-name=libgcc_s.so` | ..." - #CC_SEARCH_FLAGS="${CC_SEARCH_FLAGS},-R,$v9gcclibdir" - -else - if test "$arch" = "amd64 i386"; then : - - # JH: static-libgcc is necessary for core Tcl, but may - # not be necessary for extensions. - SHLIB_LD="$SHLIB_LD -m64 -static-libgcc" - -fi -fi - -fi - -else - - case $system in - SunOS-5.[1-9][0-9]*) - # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS - SHLIB_LD='${CC} -G -z text ${LDFLAGS_DEFAULT}';; - *) - SHLIB_LD='/usr/ccs/bin/ld -G -z text';; - esac - CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' - -fi - ;; - UNIX_SV* | UnixWare-5*) - SHLIB_CFLAGS="-KPIC" - SHLIB_LD='${CC} -G' - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - # Some UNIX_SV* systems (unixware 1.1.2 for example) have linkers - # that don't grok the -Bexport option. Test that it does. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld accepts -Bexport flag" >&5 -$as_echo_n "checking for ld accepts -Bexport flag... " >&6; } -if ${tcl_cv_ld_Bexport+:} false; then : - $as_echo_n "(cached) " >&6 -else - - hold_ldflags=$LDFLAGS - LDFLAGS="$LDFLAGS -Wl,-Bexport" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -int i; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - tcl_cv_ld_Bexport=yes -else - tcl_cv_ld_Bexport=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$hold_ldflags -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_ld_Bexport" >&5 -$as_echo "$tcl_cv_ld_Bexport" >&6; } - if test $tcl_cv_ld_Bexport = yes; then : - - LDFLAGS="$LDFLAGS -Wl,-Bexport" - -fi - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - ;; - esac - - if test "$do64bit" = yes -a "$do64bit_ok" = no; then : - - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 64bit support being disabled -- don't know magic for this platform" >&5 -$as_echo "$as_me: WARNING: 64bit support being disabled -- don't know magic for this platform" >&2;} - -fi - - - - # Add in the arch flags late to ensure it wasn't removed. - # Not necessary in TEA, but this is aligned with core - LDFLAGS="$LDFLAGS $LDFLAGS_ARCH" - - # If we're running gcc, then change the C flags for compiling shared - # libraries to the right flags for gcc, instead of those for the - # standard manufacturer compiler. - - if test "$GCC" = yes; then : - - case $system in - AIX-*) ;; - BSD/OS*) ;; - CYGWIN_*|MINGW32_*|MINGW64_*) ;; - IRIX*) ;; - NetBSD-*|DragonFly-*|FreeBSD-*|OpenBSD-*) ;; - Darwin-*) ;; - SCO_SV-3.2*) ;; - windows) ;; - *) SHLIB_CFLAGS="-fPIC" ;; - esac -fi - - if test "$tcl_cv_cc_visibility_hidden" != yes; then : - - -$as_echo "#define MODULE_SCOPE extern" >>confdefs.h - - -fi - - if test "$SHARED_LIB_SUFFIX" = ""; then : - - # TEA specific: use PACKAGE_VERSION instead of VERSION - SHARED_LIB_SUFFIX='${PACKAGE_VERSION}${SHLIB_SUFFIX}' -fi - if test "$UNSHARED_LIB_SUFFIX" = ""; then : - - # TEA specific: use PACKAGE_VERSION instead of VERSION - UNSHARED_LIB_SUFFIX='${PACKAGE_VERSION}.a' -fi - - if test "${GCC}" = "yes" -a ${SHLIB_SUFFIX} = ".dll"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for SEH support in compiler" >&5 -$as_echo_n "checking for SEH support in compiler... " >&6; } -if ${tcl_cv_seh+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then : - tcl_cv_seh=no -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#define WIN32_LEAN_AND_MEAN -#include -#undef WIN32_LEAN_AND_MEAN - - int main(int argc, char** argv) { - int a, b = 0; - __try { - a = 666 / b; - } - __except (EXCEPTION_EXECUTE_HANDLER) { - return 0; - } - return 1; - } - -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - tcl_cv_seh=yes -else - tcl_cv_seh=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_seh" >&5 -$as_echo "$tcl_cv_seh" >&6; } - if test "$tcl_cv_seh" = "no" ; then - -$as_echo "#define HAVE_NO_SEH 1" >>confdefs.h - - fi - - # - # Check to see if the excpt.h include file provided contains the - # definition for EXCEPTION_DISPOSITION; if not, which is the case - # with Cygwin's version as of 2002-04-10, define it to be int, - # sufficient for getting the current code to work. - # - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for EXCEPTION_DISPOSITION support in include files" >&5 -$as_echo_n "checking for EXCEPTION_DISPOSITION support in include files... " >&6; } -if ${tcl_cv_eh_disposition+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -# define WIN32_LEAN_AND_MEAN -# include -# undef WIN32_LEAN_AND_MEAN - -int -main () -{ - - EXCEPTION_DISPOSITION x; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - tcl_cv_eh_disposition=yes -else - tcl_cv_eh_disposition=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_eh_disposition" >&5 -$as_echo "$tcl_cv_eh_disposition" >&6; } - if test "$tcl_cv_eh_disposition" = "no" ; then - -$as_echo "#define EXCEPTION_DISPOSITION int" >>confdefs.h - - fi - - # Check to see if winnt.h defines CHAR, SHORT, and LONG - # even if VOID has already been #defined. The win32api - # used by mingw and cygwin is known to do this. - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for winnt.h that ignores VOID define" >&5 -$as_echo_n "checking for winnt.h that ignores VOID define... " >&6; } -if ${tcl_cv_winnt_ignore_void+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#define VOID void -#define WIN32_LEAN_AND_MEAN -#include -#undef WIN32_LEAN_AND_MEAN - -int -main () -{ - - CHAR c; - SHORT s; - LONG l; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - tcl_cv_winnt_ignore_void=yes -else - tcl_cv_winnt_ignore_void=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_winnt_ignore_void" >&5 -$as_echo "$tcl_cv_winnt_ignore_void" >&6; } - if test "$tcl_cv_winnt_ignore_void" = "yes" ; then - -$as_echo "#define HAVE_WINNT_IGNORE_VOID 1" >>confdefs.h - - fi - fi - - # See if the compiler supports casting to a union type. - # This is used to stop gcc from printing a compiler - # warning when initializing a union member. - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for cast to union support" >&5 -$as_echo_n "checking for cast to union support... " >&6; } -if ${tcl_cv_cast_to_union+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - union foo { int i; double d; }; - union foo f = (union foo) (int) 0; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - tcl_cv_cast_to_union=yes -else - tcl_cv_cast_to_union=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_cast_to_union" >&5 -$as_echo "$tcl_cv_cast_to_union" >&6; } - if test "$tcl_cv_cast_to_union" = "yes"; then - -$as_echo "#define HAVE_CAST_TO_UNION 1" >>confdefs.h - - fi - - - - - - - - - - - - - - # These must be called after we do the basic CFLAGS checks and - # verify any possible 64-bit or similar switches are necessary - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for required early compiler flags" >&5 -$as_echo_n "checking for required early compiler flags... " >&6; } - tcl_flags="" - - if ${tcl_cv_flag__isoc99_source+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -char *p = (char *)strtoll; char *q = (char *)strtoull; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - tcl_cv_flag__isoc99_source=no -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#define _ISOC99_SOURCE 1 -#include -int -main () -{ -char *p = (char *)strtoll; char *q = (char *)strtoull; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - tcl_cv_flag__isoc99_source=yes -else - tcl_cv_flag__isoc99_source=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - - if test "x${tcl_cv_flag__isoc99_source}" = "xyes" ; then - -$as_echo "#define _ISOC99_SOURCE 1" >>confdefs.h - - tcl_flags="$tcl_flags _ISOC99_SOURCE" - fi - - - if ${tcl_cv_flag__largefile64_source+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -struct stat64 buf; int i = stat64("/", &buf); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - tcl_cv_flag__largefile64_source=no -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#define _LARGEFILE64_SOURCE 1 -#include -int -main () -{ -struct stat64 buf; int i = stat64("/", &buf); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - tcl_cv_flag__largefile64_source=yes -else - tcl_cv_flag__largefile64_source=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - - if test "x${tcl_cv_flag__largefile64_source}" = "xyes" ; then - -$as_echo "#define _LARGEFILE64_SOURCE 1" >>confdefs.h - - tcl_flags="$tcl_flags _LARGEFILE64_SOURCE" - fi - - - if ${tcl_cv_flag__largefile_source64+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -char *p = (char *)open64; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - tcl_cv_flag__largefile_source64=no -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#define _LARGEFILE_SOURCE64 1 -#include -int -main () -{ -char *p = (char *)open64; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - tcl_cv_flag__largefile_source64=yes -else - tcl_cv_flag__largefile_source64=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - - if test "x${tcl_cv_flag__largefile_source64}" = "xyes" ; then - -$as_echo "#define _LARGEFILE_SOURCE64 1" >>confdefs.h - - tcl_flags="$tcl_flags _LARGEFILE_SOURCE64" - fi - - if test "x${tcl_flags}" = "x" ; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 -$as_echo "none" >&6; } - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${tcl_flags}" >&5 -$as_echo "${tcl_flags}" >&6; } - fi - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for 64-bit integer type" >&5 -$as_echo_n "checking for 64-bit integer type... " >&6; } - if ${tcl_cv_type_64bit+:} false; then : - $as_echo_n "(cached) " >&6 -else - - tcl_cv_type_64bit=none - # See if the compiler knows natively about __int64 - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -__int64 value = (__int64) 0; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - tcl_type_64bit=__int64 -else - tcl_type_64bit="long long" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - # See if we should use long anyway Note that we substitute in the - # type that is our current guess for a 64-bit type inside this check - # program, so it should be modified only carefully... - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -switch (0) { - case 1: case (sizeof(${tcl_type_64bit})==sizeof(long)): ; - } - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - tcl_cv_type_64bit=${tcl_type_64bit} -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - - if test "${tcl_cv_type_64bit}" = none ; then - -$as_echo "#define TCL_WIDE_INT_IS_LONG 1" >>confdefs.h - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: using long" >&5 -$as_echo "using long" >&6; } - elif test "${tcl_cv_type_64bit}" = "__int64" \ - -a "${TEA_PLATFORM}" = "windows" ; then - # TEA specific: We actually want to use the default tcl.h checks in - # this case to handle both TCL_WIDE_INT_TYPE and TCL_LL_MODIFIER* - { $as_echo "$as_me:${as_lineno-$LINENO}: result: using Tcl header defaults" >&5 -$as_echo "using Tcl header defaults" >&6; } - else - -cat >>confdefs.h <<_ACEOF -#define TCL_WIDE_INT_TYPE ${tcl_cv_type_64bit} -_ACEOF - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${tcl_cv_type_64bit}" >&5 -$as_echo "${tcl_cv_type_64bit}" >&6; } - - # Now check for auxiliary declarations - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for struct dirent64" >&5 -$as_echo_n "checking for struct dirent64... " >&6; } -if ${tcl_cv_struct_dirent64+:} false; then : - $as_echo_n "(cached) " >&6 -else - - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -int -main () -{ -struct dirent64 p; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - tcl_cv_struct_dirent64=yes -else - tcl_cv_struct_dirent64=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_struct_dirent64" >&5 -$as_echo "$tcl_cv_struct_dirent64" >&6; } - if test "x${tcl_cv_struct_dirent64}" = "xyes" ; then - -$as_echo "#define HAVE_STRUCT_DIRENT64 1" >>confdefs.h - - fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for struct stat64" >&5 -$as_echo_n "checking for struct stat64... " >&6; } -if ${tcl_cv_struct_stat64+:} false; then : - $as_echo_n "(cached) " >&6 -else - - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -struct stat64 p; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - tcl_cv_struct_stat64=yes -else - tcl_cv_struct_stat64=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_struct_stat64" >&5 -$as_echo "$tcl_cv_struct_stat64" >&6; } - if test "x${tcl_cv_struct_stat64}" = "xyes" ; then - -$as_echo "#define HAVE_STRUCT_STAT64 1" >>confdefs.h - - fi - - for ac_func in open64 lseek64 -do : - as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" -if eval test \"x\$"$as_ac_var"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF - -fi -done - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for off64_t" >&5 -$as_echo_n "checking for off64_t... " >&6; } - if ${tcl_cv_type_off64_t+:} false; then : - $as_echo_n "(cached) " >&6 -else - - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -off64_t offset; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - tcl_cv_type_off64_t=yes -else - tcl_cv_type_off64_t=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - - if test "x${tcl_cv_type_off64_t}" = "xyes" && \ - test "x${ac_cv_func_lseek64}" = "xyes" && \ - test "x${ac_cv_func_open64}" = "xyes" ; then - -$as_echo "#define HAVE_TYPE_OFF64_T 1" >>confdefs.h - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - fi - fi - - - -#-------------------------------------------------------------------- -# Set the default compiler switches based on the --enable-symbols option. -#-------------------------------------------------------------------- - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for build with symbols" >&5 -$as_echo_n "checking for build with symbols... " >&6; } - # Check whether --enable-symbols was given. -if test "${enable_symbols+set}" = set; then : - enableval=$enable_symbols; tcl_ok=$enableval -else - tcl_ok=no -fi - - DBGX="" - if test "$tcl_ok" = "no"; then - CFLAGS_DEFAULT="${CFLAGS_OPTIMIZE} -DNDEBUG" - LDFLAGS_DEFAULT="${LDFLAGS_OPTIMIZE}" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - else - CFLAGS_DEFAULT="${CFLAGS_DEBUG}" - LDFLAGS_DEFAULT="${LDFLAGS_DEBUG}" - if test "$tcl_ok" = "yes"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes (standard debugging)" >&5 -$as_echo "yes (standard debugging)" >&6; } - fi - fi - # TEA specific: - if test "${TEA_PLATFORM}" != "windows" ; then - LDFLAGS_DEFAULT="${LDFLAGS}" - fi - - - - - if test "$tcl_ok" = "mem" -o "$tcl_ok" = "all"; then - -$as_echo "#define TCL_MEM_DEBUG 1" >>confdefs.h - - fi - - if test "$tcl_ok" != "yes" -a "$tcl_ok" != "no"; then - if test "$tcl_ok" = "all"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: enabled symbols mem debugging" >&5 -$as_echo "enabled symbols mem debugging" >&6; } - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: enabled $tcl_ok debugging" >&5 -$as_echo "enabled $tcl_ok debugging" >&6; } - fi - fi - - -#-------------------------------------------------------------------- -# If the variable OPENSSL is set, we will build with the OpenSSL -# libraries. If it is not set, then we will use RSA BSAFE SSL-C -# libraries instead of the default OpenSSL libaries. -#-------------------------------------------------------------------- - -OPENSSL="1" - - - - #-------------------------------------------------------------------- - # If the variable OPENSSL is set, we will build with the OpenSSL - # libraries. If it is not set, then we will use RSA BSAFE SSL-C - # libraries instead of the default OpenSSL libaries. - #-------------------------------------------------------------------- - - # Check whether --enable-bsafe was given. -if test "${enable_bsafe+set}" = set; then : - enableval=$enable_bsafe; OPENSSL="" -else - OPENSSL="1" -fi - - - #-------------------------------------------------------------------- - # Establish the location of the root directory for OpenSSL. - # If we're not using OpenSSL, set the root for BSAFE SSL-C. - # If we're using BSAFE, define the BSAFE compiler flag. - # The "FLAT_INC" flag is used in the BSAFE ssl.h header file and - # doesn't seem to be referenced anywhere else. - #-------------------------------------------------------------------- - if test -n "${OPENSSL}"; then - SSL_DIR='/usr /usr/local' - $as_echo "#define NO_IDEA 1" >>confdefs.h - - $as_echo "#define NO_RC5 1" >>confdefs.h - - else - SSL_DIR='/usr/sslc /usr/local/sslc' - $as_echo "#define BSAFE 1" >>confdefs.h - - $as_echo "#define FLAT_INC 1" >>confdefs.h - - fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for SSL directory" >&5 -$as_echo_n "checking for SSL directory... " >&6; } - - -# Check whether --with-ssl-dir was given. -if test "${with_ssl_dir+set}" = set; then : - withval=$with_ssl_dir; with_ssldir=${withval} -fi - - - if ${ac_cv_c_ssldir+:} false; then : - $as_echo_n "(cached) " >&6 -else - - # Use the value from --with-ssl-dir, if it was given - if test x"${with_ssldir}" != x ; then - if test -d "${with_ssldir}" ; then - ac_cv_c_ssldir=${with_ssldir} - else - as_fn_error $? "${with_ssldir} is not a valid directory" "$LINENO" 5 - fi - else - list="`ls -d ${SSL_DIR} 2>/dev/null`" - for i in $list ; do - if test -d "$i" ; then - ac_cv_c_ssldir=$i - break - fi - done - fi - -fi - - - # Print a message based on how we determined the include path - - if test x"${ac_cv_c_ssldir}" = x ; then - as_fn_error $? "Could not find SSL directory. -Please specify its location with --with-ssl-dir" "$LINENO" 5 - else - SSL_DIR=${ac_cv_c_ssldir} - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${SSL_DIR}" >&5 -$as_echo "${SSL_DIR}" >&6; } - fi - - - #-------------------------------------------------------------------- - # The OpenSSL and BSAFE SSL-C directory structures differ. - #-------------------------------------------------------------------- - - if test -n "${OPENSSL}"; then - SSL_LIB_DIR=${SSL_DIR}/lib - SSL_INCLUDE_DIR=${SSL_DIR}/include - if test ! -f "${SSL_INCLUDE_DIR}/openssl/opensslv.h"; then - as_fn_error $? "bad ssl-dir: cannot find openssl/opensslv.h under ${SSL_INCLUDE_DIR}" "$LINENO" 5 - fi - else - #-------------------------------------------------------------------- - # If we're using RSA BSAFE SSL-C, we need to establish what platform - # we're running on before we can figure out some paths. - # This step isn't necessary if we're using OpenSSL. - #-------------------------------------------------------------------- - - if test -z "${OPENSSL}"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking host type" >&5 -$as_echo_n "checking host type... " >&6; } - case "`uname -s`" in - *win32* | *WIN32* | *CYGWIN_NT*|*CYGWIN_98*|*CYGWIN_95*) - PLATFORM=WIN32 - ;; - *SunOS*) - PLATFORM=SOLARIS - ;; - HP-UX) - PLATFORM=HPUX - ;; - *) - PLATFORM=LINUX - ;; - esac - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${PLATFORM}" >&5 -$as_echo "${PLATFORM}" >&6; } - fi - SSL_LIB_DIR=${SSL_DIR}/${PLATFORM}/library/lib - SSL_INCLUDE_DIR=${SSL_DIR}/${PLATFORM}/library/include - if test ! -f "${SSL_INCLUDE_DIR}/crypto.h"; then - as_fn_error $? "bad ssl-dir: cannot find crypto.h under ${SSL_INCLUDE_DIR}" "$LINENO" 5 - fi - fi - - - - - - SSL_INCLUDE_DIR_NATIVE=\"`${CYGPATH} ${SSL_INCLUDE_DIR}`\" - SSL_LIB_DIR_NATIVE=\"`${CYGPATH} ${SSL_LIB_DIR}`\" - - - - #-------------------------------------------------------------------- - # If OpenSSL was built with gcc then there may be some symbols that need - # resolving before we can load it into tclsh (__udivd3i on solaris. - # Let the user specify if we need to add libgcc to the link line to - # resolve these symbols. - # - # This doesn't seem to be necessary if the RSA BSAFE SSL-C libraries - # are used instead of OpenSSL. - #-------------------------------------------------------------------- - - if test -n "${OPENSSL}"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libgcc is needed to resolve openssl symbols" >&5 -$as_echo_n "checking if libgcc is needed to resolve openssl symbols... " >&6; } - - -# Check whether --with-gcclib was given. -if test "${with_gcclib+set}" = set; then : - withval=$with_gcclib; GCCLIB="-lgcc" -else - GCCLIB="" -fi - - - if test "x${GCCLIB}" = "x" ; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for gcc library location" >&5 -$as_echo_n "checking for gcc library location... " >&6; } - GCCPATH=`${CC} -print-libgcc-file-name | sed -e 's#[^/]*0#'` - GCCPATH="-L${GCCPATH}" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${GCCPATH}" >&5 -$as_echo "${GCCPATH}" >&6; } - fi - fi - - - -#-------------------------------------------------------------------- -# Determine if we should use the patented encryption code -#-------------------------------------------------------------------- - -# Check whether --enable-patents was given. -if test "${enable_patents+set}" = set; then : - enableval=$enable_patents; PATENTS=${enableval} -else - PATENTS=yes -fi - - -if test ${PATENTS} = no; then - $as_echo "#define NO_PATENTS 1" >>confdefs.h - -fi - -#-------------------------------------------------------------------- -# This macro generates a line to use when building a library. It -# depends on values set by the TEA_ENABLE_SHARED, TEA_ENABLE_SYMBOLS, -# and TEA_LOAD_TCLCONFIG macros above. -#-------------------------------------------------------------------- - - - if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes"; then - MAKE_STATIC_LIB="\${STLIB_LD} -out:\$@ \$(PKG_OBJECTS)" - MAKE_SHARED_LIB="\${SHLIB_LD} \${SHLIB_LD_LIBS} \${LDFLAGS_DEFAULT} -out:\$@ \$(PKG_OBJECTS)" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#if defined(_MSC_VER) && _MSC_VER >= 1400 -print("manifest needed") -#endif - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "manifest needed" >/dev/null 2>&1; then : - - # Could do a CHECK_PROG for mt, but should always be with MSVC8+ - VC_MANIFEST_EMBED_DLL="if test -f \$@.manifest ; then mt.exe -nologo -manifest \$@.manifest -outputresource:\$@\;2 ; fi" - VC_MANIFEST_EMBED_EXE="if test -f \$@.manifest ; then mt.exe -nologo -manifest \$@.manifest -outputresource:\$@\;1 ; fi" - MAKE_SHARED_LIB="${MAKE_SHARED_LIB} ; ${VC_MANIFEST_EMBED_DLL}" - - CLEANFILES="$CLEANFILES *.manifest" - - -fi -rm -f conftest* - - MAKE_STUB_LIB="\${STLIB_LD} -nodefaultlib -out:\$@ \$(PKG_STUB_OBJECTS)" - else - MAKE_STATIC_LIB="\${STLIB_LD} \$@ \$(PKG_OBJECTS)" - MAKE_SHARED_LIB="\${SHLIB_LD} -o \$@ \$(PKG_OBJECTS) \${SHLIB_LD_LIBS}" - MAKE_STUB_LIB="\${STLIB_LD} \$@ \$(PKG_STUB_OBJECTS)" - fi - - if test "${SHARED_BUILD}" = "1" ; then - MAKE_LIB="${MAKE_SHARED_LIB} " - else - MAKE_LIB="${MAKE_STATIC_LIB} " - fi - - #-------------------------------------------------------------------- - # Shared libraries and static libraries have different names. - # Use the double eval to make sure any variables in the suffix is - # substituted. (@@@ Might not be necessary anymore) - #-------------------------------------------------------------------- - - if test "${TEA_PLATFORM}" = "windows" ; then - if test "${SHARED_BUILD}" = "1" ; then - # We force the unresolved linking of symbols that are really in - # the private libraries of Tcl and Tk. - if test x"${TK_BIN_DIR}" != x ; then - SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TK_BIN_DIR}/${TK_STUB_LIB_FILE}`\"" - fi - SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}`\"" - if test "$GCC" = "yes"; then - SHLIB_LD_LIBS="${SHLIB_LD_LIBS} -static-libgcc" - fi - eval eval "PKG_LIB_FILE=${PACKAGE_LIB_PREFIX}${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" - else - eval eval "PKG_LIB_FILE=${PACKAGE_LIB_PREFIX}${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" - if test "$GCC" = "yes"; then - PKG_LIB_FILE=lib${PKG_LIB_FILE} - fi - fi - # Some packages build their own stubs libraries - eval eval "PKG_STUB_LIB_FILE=${PACKAGE_LIB_PREFIX}${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}" - if test "$GCC" = "yes"; then - PKG_STUB_LIB_FILE=lib${PKG_STUB_LIB_FILE} - fi - # These aren't needed on Windows (either MSVC or gcc) - RANLIB=: - RANLIB_STUB=: - else - RANLIB_STUB="${RANLIB}" - if test "${SHARED_BUILD}" = "1" ; then - SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TCL_STUB_LIB_SPEC}" - if test x"${TK_BIN_DIR}" != x ; then - SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TK_STUB_LIB_SPEC}" - fi - eval eval "PKG_LIB_FILE=lib${PACKAGE_LIB_PREFIX}${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" - RANLIB=: - else - eval eval "PKG_LIB_FILE=lib${PACKAGE_LIB_PREFIX}${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" - fi - # Some packages build their own stubs libraries - eval eval "PKG_STUB_LIB_FILE=lib${PACKAGE_LIB_PREFIX}${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}" - fi - - # These are escaped so that only CFLAGS is picked up at configure time. - # The other values will be substituted at make time. - CFLAGS="${CFLAGS} \${CFLAGS_DEFAULT} \${CFLAGS_WARNING}" - if test "${SHARED_BUILD}" = "1" ; then - CFLAGS="${CFLAGS} \${SHLIB_CFLAGS}" - fi - - - - - - - - - - -#-------------------------------------------------------------------- -# Shared libraries and static libraries have different names. -# Also, windows libraries and unix libraries have different names. -# For the OpenSSL version, I chose to use the same library names that -# OpenSSL uses as its default names. -#-------------------------------------------------------------------- - -if test "${TEA_PLATFORM}" = "windows" ; then - if test "$GCC" = "yes"; then - - vars="-L${SSL_LIB_DIR_NATIVE}" - for i in $vars; do - if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then - # Convert foo.lib to -lfoo for GCC. No-op if not *.lib - i=`echo "$i" | sed -e 's/^\([^-].*\)\.lib$/-l\1/i'` - fi - PKG_LIBS="$PKG_LIBS $i" - done - - - else - - vars="-libpath:${SSL_LIB_DIR_NATIVE}" - for i in $vars; do - if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then - # Convert foo.lib to -lfoo for GCC. No-op if not *.lib - i=`echo "$i" | sed -e 's/^\([^-].*\)\.lib$/-l\1/i'` - fi - PKG_LIBS="$PKG_LIBS $i" - done - - - fi - if test -n "${OPENSSL}"; then - - vars="ssleay32.lib libeay32.lib" - for i in $vars; do - if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then - # Convert foo.lib to -lfoo for GCC. No-op if not *.lib - i=`echo "$i" | sed -e 's/^\([^-].*\)\.lib$/-l\1/i'` - fi - PKG_LIBS="$PKG_LIBS $i" - done - - - else - - vars="sslc32.lib" - for i in $vars; do - if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then - # Convert foo.lib to -lfoo for GCC. No-op if not *.lib - i=`echo "$i" | sed -e 's/^\([^-].*\)\.lib$/-l\1/i'` - fi - PKG_LIBS="$PKG_LIBS $i" - done - - - fi -else - # Subst runtime dir here, use -R and -L where necessary. [Bug 1742859] - LIB_RUNTIME_DIR=${SSL_LIB_DIR} - eval "LD_SEARCH_FLAGS=\"${LD_SEARCH_FLAGS}\"" - if test -n "${OPENSSL}"; then - - vars="${LD_SEARCH_FLAGS} -L${SSL_LIB_DIR} -lssl -lcrypto ${GCCPATH} ${GCCLIB}" - for i in $vars; do - if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then - # Convert foo.lib to -lfoo for GCC. No-op if not *.lib - i=`echo "$i" | sed -e 's/^\([^-].*\)\.lib$/-l\1/i'` - fi - PKG_LIBS="$PKG_LIBS $i" - done - - - else - - vars="${LD_SEARCH_FLAGS} -L${SSL_LIB_DIR} -lsslc" - for i in $vars; do - if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then - # Convert foo.lib to -lfoo for GCC. No-op if not *.lib - i=`echo "$i" | sed -e 's/^\([^-].*\)\.lib$/-l\1/i'` - fi - PKG_LIBS="$PKG_LIBS $i" - done - - - fi -fi - -#-------------------------------------------------------------------- -# Determine the name of the tclsh and/or wish executables in the -# Tcl and Tk build directories or the location they were installed -# into. These paths are used to support running test cases only, -# the Makefile should not be making use of these paths to generate -# a pkgIndex.tcl file or anything else at extension build time. -#-------------------------------------------------------------------- - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tclsh" >&5 -$as_echo_n "checking for tclsh... " >&6; } - if test -f "${TCL_BIN_DIR}/Makefile" ; then - # tclConfig.sh is in Tcl build directory - if test "${TEA_PLATFORM}" = "windows"; then - if test -f "${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}" ; then - TCLSH_PROG="${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}" - elif test -f "${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}s${EXEEXT}" ; then - TCLSH_PROG="${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}s${EXEEXT}" - elif test -f "${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}t${EXEEXT}" ; then - TCLSH_PROG="${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}t${EXEEXT}" - elif test -f "${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}st${EXEEXT}" ; then - TCLSH_PROG="${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}st${EXEEXT}" - fi - else - TCLSH_PROG="${TCL_BIN_DIR}/tclsh" - fi - else - # tclConfig.sh is in install location - if test "${TEA_PLATFORM}" = "windows"; then - TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}" - else - TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}.${TCL_MINOR_VERSION}${TCL_DBGX}" - fi - list="`ls -d ${TCL_BIN_DIR}/../bin 2>/dev/null` \ - `ls -d ${TCL_BIN_DIR}/.. 2>/dev/null` \ - `ls -d ${TCL_PREFIX}/bin 2>/dev/null`" - for i in $list ; do - if test -f "$i/${TCLSH_PROG}" ; then - REAL_TCL_BIN_DIR="`cd "$i"; pwd`/" - break - fi - done - TCLSH_PROG="${REAL_TCL_BIN_DIR}${TCLSH_PROG}" - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${TCLSH_PROG}" >&5 -$as_echo "${TCLSH_PROG}" >&6; } - - -#TEA_PROG_WISH - -#-------------------------------------------------------------------- -# Setup a *Config.sh.in configuration file. -#-------------------------------------------------------------------- - - - #-------------------------------------------------------------------- - # These are for tlsConfig.sh - #-------------------------------------------------------------------- - - # pkglibdir must be a fully qualified path and (not ${exec_prefix}/lib) - eval pkglibdir="${libdir}/tls${PACKAGE_VERSION}" - if test "${TCL_LIB_VERSIONS_OK}" = "ok"; then - eval tls_LIB_FLAG="-ltls${PACKAGE_VERSION}${DBGX}" - eval tls_STUB_LIB_FLAG="-ltlsstub${PACKAGE_VERSION}${DBGX}" - else - eval tls_LIB_FLAG="-ltls`echo ${PACKAGE_VERSION} | tr -d .`${DBGX}" - eval tls_STUB_LIB_FLAG="-ltlsstub`echo ${PACKAGE_VERSION} | tr -d .`${DBGX}" - fi - tls_BUILD_LIB_SPEC="-L`$CYGPATH $(pwd)` ${tls_LIB_FLAG}" - tls_LIB_SPEC="-L`$CYGPATH ${pkglibdir}` ${tls_LIB_FLAG}" - tls_BUILD_STUB_LIB_SPEC="-L`$CYGPATH $(pwd)` ${tls_STUB_LIB_FLAG}" - tls_STUB_LIB_SPEC="-L`$CYGPATH ${pkglibdir}` ${tls_STUB_LIB_FLAG}" - tls_BUILD_STUB_LIB_PATH="`$CYGPATH $(pwd)`/${PKG_STUB_LIB_FILE}" - tls_STUB_LIB_PATH="`$CYGPATH ${pkglibdir}`/${PKG_STUB_LIB_FILE}" - - - - - - - - - - - - -#AC_SUBST(SAMPLE_VAR) - -#-------------------------------------------------------------------- -# Specify files to substitute AC variables in. You may alternatively -# have a special pkgIndex.tcl.in or other files which require -# substituting the AC variables in. Include these here. -#-------------------------------------------------------------------- - -ac_config_files="$ac_config_files Makefile pkgIndex.tcl" - -ac_config_files="$ac_config_files tlsConfig.sh" - - -#-------------------------------------------------------------------- -# Finally, substitute all of the various values into the files -# specified with AC_CONFIG_FILES. -#-------------------------------------------------------------------- - -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, we kill variables containing newlines. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -( - for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - - (set) 2>&1 | - case $as_nl`(ac_space=' '; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes: double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \. - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; #( - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) | - sed ' - /^ac_cv_env_/b end - t clear - :clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - :end' >>confcache -if diff "$cache_file" confcache >/dev/null 2>&1; then :; else - if test -w "$cache_file"; then - if test "x$cache_file" != "x/dev/null"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 -$as_echo "$as_me: updating cache $cache_file" >&6;} - if test ! -f "$cache_file" || test -h "$cache_file"; then - cat confcache >"$cache_file" - else - case $cache_file in #( - */* | ?:*) - mv -f confcache "$cache_file"$$ && - mv -f "$cache_file"$$ "$cache_file" ;; #( - *) - mv -f confcache "$cache_file" ;; - esac - fi - fi - else - { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 -$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} - fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -# Transform confdefs.h into DEFS. -# Protect against shell expansion while executing Makefile rules. -# Protect against Makefile macro expansion. -# -# If the first sed substitution is executed (which looks for macros that -# take arguments), then branch to the quote section. Otherwise, -# look for a macro that doesn't take arguments. -ac_script=' -:mline -/\\$/{ - N - s,\\\n,, - b mline -} -t clear -:clear -s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g -t quote -s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g -t quote -b any -:quote -s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g -s/\[/\\&/g -s/\]/\\&/g -s/\$/$$/g -H -:any -${ - g - s/^\n// - s/\n/ /g - p -} -' -DEFS=`sed -n "$ac_script" confdefs.h` - - -ac_libobjs= -ac_ltlibobjs= -U= -for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' - ac_i=`$as_echo "$ac_i" | sed "$ac_script"` - # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR - # will be set to the directory where LIBOBJS objects are built. - as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" - as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' -done -LIBOBJS=$ac_libobjs - -LTLIBOBJS=$ac_ltlibobjs - - - -CFLAGS="${CFLAGS} ${CPPFLAGS}"; CPPFLAGS="" - -: "${CONFIG_STATUS=./config.status}" -ac_write_fail=0 -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 -$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} -as_write_fail=0 -cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false - -SHELL=\${CONFIG_SHELL-$SHELL} -export SHELL -_ASEOF -cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in #( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in #(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - - -# as_fn_error STATUS ERROR [LINENO LOG_FD] -# ---------------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} # as_fn_error - - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -pR'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -pR' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -pR' - fi -else - as_ln_s='cp -pR' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} # as_fn_mkdir_p -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - - -# as_fn_executable_p FILE -# ----------------------- -# Test if FILE is an executable regular file. -as_fn_executable_p () -{ - test -f "$1" && test -x "$1" -} # as_fn_executable_p -as_test_x='test -x' -as_executable_p=as_fn_executable_p - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -exec 6>&1 -## ----------------------------------- ## -## Main body of $CONFIG_STATUS script. ## -## ----------------------------------- ## -_ASEOF -test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# Save the log message, to keep $0 and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. -ac_log=" -This file was extended by tls $as_me 1.6.7, which was -generated by GNU Autoconf 2.69. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -on `(hostname || uname -n) 2>/dev/null | sed 1q` -" - -_ACEOF - -case $ac_config_files in *" -"*) set x $ac_config_files; shift; ac_config_files=$*;; -esac - - - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# Files that config.status was made for. -config_files="$ac_config_files" - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -ac_cs_usage="\ -\`$as_me' instantiates files and other configuration actions -from templates according to the current configuration. Unless the files -and actions are specified as TAGs, all are instantiated by default. - -Usage: $0 [OPTION]... [TAG]... - - -h, --help print this help, then exit - -V, --version print version number and configuration settings, then exit - --config print configuration, then exit - -q, --quiet, --silent - do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - -Configuration files: -$config_files - -Report bugs to the package provider." - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" -ac_cs_version="\\ -tls config.status 1.6.7 -configured by $0, generated by GNU Autoconf 2.69, - with options \\"\$ac_cs_config\\" - -Copyright (C) 2012 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." - -ac_pwd='$ac_pwd' -srcdir='$srcdir' -test -n "\$AWK" || AWK=awk -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# The default lists apply if the user does not specify any file. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=?*) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` - ac_shift=: - ;; - --*=) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg= - ac_shift=: - ;; - *) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - esac - - case $ac_option in - # Handling of the options. - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) - $as_echo "$ac_cs_version"; exit ;; - --config | --confi | --conf | --con | --co | --c ) - $as_echo "$ac_cs_config"; exit ;; - --debug | --debu | --deb | --de | --d | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - '') as_fn_error $? "missing file argument" ;; - esac - as_fn_append CONFIG_FILES " '$ac_optarg'" - ac_need_defaults=false;; - --he | --h | --help | --hel | -h ) - $as_echo "$ac_cs_usage"; exit ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) as_fn_error $? "unrecognized option: \`$1' -Try \`$0 --help' for more information." ;; - - *) as_fn_append ac_config_targets " $1" - ac_need_defaults=false ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -if \$ac_cs_recheck; then - set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion - shift - \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 - CONFIG_SHELL='$SHELL' - export CONFIG_SHELL - exec "\$@" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX - $as_echo "$ac_log" -} >&5 - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - -# Handling of arguments. -for ac_config_target in $ac_config_targets -do - case $ac_config_target in - "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; - "pkgIndex.tcl") CONFIG_FILES="$CONFIG_FILES pkgIndex.tcl" ;; - "tlsConfig.sh") CONFIG_FILES="$CONFIG_FILES tlsConfig.sh" ;; - - *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; - esac -done - - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason against having it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Hook for its removal unless debugging. -# Note that there is a small window in which the directory will not be cleaned: -# after its creation but before its name has been assigned to `$tmp'. -$debug || -{ - tmp= ac_tmp= - trap 'exit_status=$? - : "${ac_tmp:=$tmp}" - { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status -' 0 - trap 'as_fn_exit 1' 1 2 13 15 -} -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -d "$tmp" -} || -{ - tmp=./conf$$-$RANDOM - (umask 077 && mkdir "$tmp") -} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 -ac_tmp=$tmp - -# Set up the scripts for CONFIG_FILES section. -# No need to generate them if there are no CONFIG_FILES. -# This happens for instance with `./config.status config.h'. -if test -n "$CONFIG_FILES"; then - - -ac_cr=`echo X | tr X '\015'` -# On cygwin, bash can eat \r inside `` if the user requested igncr. -# But we know of no other shell where ac_cr would be empty at this -# point, so we can use a bashism as a fallback. -if test "x$ac_cr" = x; then - eval ac_cr=\$\'\\r\' -fi -ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` -if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then - ac_cs_awk_cr='\\r' -else - ac_cs_awk_cr=$ac_cr -fi - -echo 'BEGIN {' >"$ac_tmp/subs1.awk" && -_ACEOF - - -{ - echo "cat >conf$$subs.awk <<_ACEOF" && - echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && - echo "_ACEOF" -} >conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 -ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` -ac_delim='%!_!# ' -for ac_last_try in false false false false false :; do - . ./conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - - ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` - if test $ac_delim_n = $ac_delim_num; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done -rm -f conf$$subs.sh - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && -_ACEOF -sed -n ' -h -s/^/S["/; s/!.*/"]=/ -p -g -s/^[^!]*!// -:repl -t repl -s/'"$ac_delim"'$// -t delim -:nl -h -s/\(.\{148\}\)..*/\1/ -t more1 -s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ -p -n -b repl -:more1 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t nl -:delim -h -s/\(.\{148\}\)..*/\1/ -t more2 -s/["\\]/\\&/g; s/^/"/; s/$/"/ -p -b -:more2 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t delim -' >$CONFIG_STATUS || ac_write_fail=1 -rm -f conf$$subs.awk -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -_ACAWK -cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && - for (key in S) S_is_set[key] = 1 - FS = "" - -} -{ - line = $ 0 - nfields = split(line, field, "@") - substed = 0 - len = length(field[1]) - for (i = 2; i < nfields; i++) { - key = field[i] - keylen = length(key) - if (S_is_set[key]) { - value = S[key] - line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) - len += length(value) + length(field[++i]) - substed = 1 - } else - len += 1 + keylen - } - - print line -} - -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then - sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" -else - cat -fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ - || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 -_ACEOF - -# VPATH may cause trouble with some makes, so we remove sole $(srcdir), -# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ -h -s/// -s/^/:/ -s/[ ]*$/:/ -s/:\$(srcdir):/:/g -s/:\${srcdir}:/:/g -s/:@srcdir@:/:/g -s/^:*// -s/:*$// -x -s/\(=[ ]*\).*/\1/ -G -s/\n// -s/^[^=]*=[ ]*$// -}' -fi - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -fi # test -n "$CONFIG_FILES" - - -eval set X " :F $CONFIG_FILES " -shift -for ac_tag -do - case $ac_tag in - :[FHLC]) ac_mode=$ac_tag; continue;; - esac - case $ac_mode$ac_tag in - :[FHL]*:*);; - :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; - :[FH]-) ac_tag=-:-;; - :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; - esac - ac_save_IFS=$IFS - IFS=: - set x $ac_tag - IFS=$ac_save_IFS - shift - ac_file=$1 - shift - - case $ac_mode in - :L) ac_source=$1;; - :[FH]) - ac_file_inputs= - for ac_f - do - case $ac_f in - -) ac_f="$ac_tmp/stdin";; - *) # Look for the file first in the build tree, then in the source tree - # (if the path is not absolute). The absolute path cannot be DOS-style, - # because $ac_f cannot contain `:'. - test -f "$ac_f" || - case $ac_f in - [\\/$]*) false;; - *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; - esac || - as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; - esac - case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac - as_fn_append ac_file_inputs " '$ac_f'" - done - - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - configure_input='Generated from '` - $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' - `' by configure.' - if test x"$ac_file" != x-; then - configure_input="$ac_file. $configure_input" - { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 -$as_echo "$as_me: creating $ac_file" >&6;} - fi - # Neutralize special characters interpreted by sed in replacement strings. - case $configure_input in #( - *\&* | *\|* | *\\* ) - ac_sed_conf_input=`$as_echo "$configure_input" | - sed 's/[\\\\&|]/\\\\&/g'`;; #( - *) ac_sed_conf_input=$configure_input;; - esac - - case $ac_tag in - *:-:* | *:-) cat >"$ac_tmp/stdin" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; - esac - ;; - esac - - ac_dir=`$as_dirname -- "$ac_file" || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir="$ac_dir"; as_fn_mkdir_p - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - - case $ac_mode in - :F) - # - # CONFIG_FILE - # - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# If the template does not know about datarootdir, expand it. -# FIXME: This hack should be removed a few years after 2.60. -ac_datarootdir_hack=; ac_datarootdir_seen= -ac_sed_dataroot=' -/datarootdir/ { - p - q -} -/@datadir@/p -/@docdir@/p -/@infodir@/p -/@localedir@/p -/@mandir@/p' -case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in -*datarootdir*) ac_datarootdir_seen=yes;; -*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - ac_datarootdir_hack=' - s&@datadir@&$datadir&g - s&@docdir@&$docdir&g - s&@infodir@&$infodir&g - s&@localedir@&$localedir&g - s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; -esac -_ACEOF - -# Neutralize VPATH when `$srcdir' = `.'. -# Shell code in configure.ac might set extrasub. -# FIXME: do we really want to maintain this feature? -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_sed_extra="$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s|@configure_input@|$ac_sed_conf_input|;t t -s&@top_builddir@&$ac_top_builddir_sub&;t t -s&@top_build_prefix@&$ac_top_build_prefix&;t t -s&@srcdir@&$ac_srcdir&;t t -s&@abs_srcdir@&$ac_abs_srcdir&;t t -s&@top_srcdir@&$ac_top_srcdir&;t t -s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -s&@builddir@&$ac_builddir&;t t -s&@abs_builddir@&$ac_abs_builddir&;t t -s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -$ac_datarootdir_hack -" -eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ - >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - -test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ - "$ac_tmp/out"`; test -z "$ac_out"; } && - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&5 -$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&2;} - - rm -f "$ac_tmp/stdin" - case $ac_file in - -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; - *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; - esac \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - ;; - - - - esac - -done # for ac_tag - - -as_fn_exit 0 -_ACEOF -ac_clean_files=$ac_clean_files_save - -test $ac_write_fail = 0 || - as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 - - -# configure is writing to config.log, and then calls config.status. -# config.status does its own redirection, appending to config.log. -# Unfortunately, on DOS this fails, as config.log is still kept open -# by configure, so config.status won't be able to write to it; its -# output is simply discarded. So we exec the FD to /dev/null, -# effectively closing config.log, so it can be properly (re)opened and -# appended to by config.status. When coming back to configure, we -# need to make the FD available again. -if test "$no_create" != yes; then - ac_cs_success=: - ac_config_status_args= - test "$silent" = yes && - ac_config_status_args="$ac_config_status_args --quiet" - exec 5>/dev/null - $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. - $ac_cs_success || as_fn_exit 1 -fi -if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 -$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} -fi - diff --git a/tls/configure.ac b/tls/configure.ac deleted file mode 100644 index 3b6c6a1..0000000 --- a/tls/configure.ac +++ /dev/null @@ -1,240 +0,0 @@ -#!/bin/bash -norc -dnl This file is an input file used by the GNU "autoconf" program to -dnl generate the file "configure", which is run during Tcl installation -dnl to configure the system for the local environment. - -#----------------------------------------------------------------------- -# Sample configure.ac for Tcl Extensions. The only places you should -# need to modify this file are marked by the string __CHANGE__ -#----------------------------------------------------------------------- - -#----------------------------------------------------------------------- -# __CHANGE__ -# Set your package name and version numbers here. -# -# This initializes the environment with PACKAGE_NAME and PACKAGE_VERSION -# set as provided. These will also be added as -D defs in your Makefile -# so you can encode the package version directly into the source files. -# This will also define a special symbol for Windows (BUILD_ -# so that we create the export library with the dll. -#----------------------------------------------------------------------- - -AC_INIT([tls], [1.6.7]) - -#-------------------------------------------------------------------- -# Call TEA_INIT as the first TEA_ macro to set up initial vars. -# This will define a ${TEA_PLATFORM} variable == "unix" or "windows" -# as well as PKG_LIB_FILE and PKG_STUB_LIB_FILE. -#-------------------------------------------------------------------- - -TEA_INIT() - -AC_CONFIG_AUX_DIR(tclconfig) - -#-------------------------------------------------------------------- -# Load the tclConfig.sh file -#-------------------------------------------------------------------- - -TEA_PATH_TCLCONFIG -TEA_LOAD_TCLCONFIG - -#-------------------------------------------------------------------- -# Load the tkConfig.sh file if necessary (Tk extension) -#-------------------------------------------------------------------- - -#TEA_PATH_TKCONFIG -#TEA_LOAD_TKCONFIG - -#----------------------------------------------------------------------- -# Handle the --prefix=... option by defaulting to what Tcl gave. -# Must be called after TEA_LOAD_TCLCONFIG and before TEA_SETUP_COMPILER. -#----------------------------------------------------------------------- - -TEA_PREFIX - -#----------------------------------------------------------------------- -# Standard compiler checks. -# This sets up CC by using the CC env var, or looks for gcc otherwise. -# This also calls AC_PROG_CC and a few others to create the basic setup -# necessary to compile executables. -#----------------------------------------------------------------------- - -TEA_SETUP_COMPILER - -#----------------------------------------------------------------------- -# __CHANGE__ -# Specify the C source files to compile in TEA_ADD_SOURCES, -# public headers that need to be installed in TEA_ADD_HEADERS, -# stub library C source files to compile in TEA_ADD_STUB_SOURCES, -# and runtime Tcl library files in TEA_ADD_TCL_SOURCES. -# This defines PKG(_STUB)_SOURCES, PKG(_STUB)_OBJECTS, PKG_HEADERS -# and PKG_TCL_SOURCES. -#----------------------------------------------------------------------- - -TEA_ADD_SOURCES([tls.c tlsIO.c tlsBIO.c tlsX509.c fixstrtod.c]) -TEA_ADD_HEADERS([]) -TEA_ADD_INCLUDES([]) -TEA_ADD_LIBS([]) -TEA_ADD_CFLAGS([]) -TEA_ADD_STUB_SOURCES([]) -TEA_ADD_TCL_SOURCES([tls.tcl]) - -#-------------------------------------------------------------------- -# __CHANGE__ -# -# You can add more files to clean if your extension creates any extra -# files by extending CLEANFILES. -# Add pkgIndex.tcl if it is generated in the Makefile instead of ./configure -# and change Makefile.in to move it from CONFIG_CLEAN_FILES to BINARIES var. -# -# A few miscellaneous platform-specific items: -# TEA_ADD_* any platform specific compiler/build info here. -#-------------------------------------------------------------------- - -#CLEANFILES="$CLEANFILES pkgIndex.tcl" -if test "${TEA_PLATFORM}" = "windows" ; then - # Ensure no empty if clauses - : - #TEA_ADD_SOURCES([win/winFile.c]) - #TEA_ADD_INCLUDES([-I\"$(${CYGPATH} ${srcdir}/win)\"]) -else - # Ensure no empty else clauses - : - #TEA_ADD_SOURCES([unix/unixFile.c]) - #TEA_ADD_LIBS([-lsuperfly]) -fi - -#-------------------------------------------------------------------- -# __CHANGE__ -# Choose which headers you need. Extension authors should try very -# hard to only rely on the Tcl public header files. Internal headers -# contain private data structures and are subject to change without -# notice. -# This MUST be called after TEA_LOAD_TCLCONFIG / TEA_LOAD_TKCONFIG -#-------------------------------------------------------------------- - -TEA_PUBLIC_TCL_HEADERS -#TEA_PRIVATE_TCL_HEADERS - -#TEA_PUBLIC_TK_HEADERS -#TEA_PRIVATE_TK_HEADERS -#TEA_PATH_X - -#-------------------------------------------------------------------- -# Check whether --enable-threads or --disable-threads was given. -# This auto-enables if Tcl was compiled threaded. -#-------------------------------------------------------------------- - -TEA_ENABLE_THREADS - -#-------------------------------------------------------------------- -# The statement below defines a collection of symbols related to -# building as a shared library instead of a static library. -#-------------------------------------------------------------------- - -TEA_ENABLE_SHARED - -#-------------------------------------------------------------------- -# This macro figures out what flags to use with the compiler/linker -# when building shared/static debug/optimized objects. This information -# can be taken from the tclConfig.sh file, but this figures it all out. -#-------------------------------------------------------------------- - -TEA_CONFIG_CFLAGS - -#-------------------------------------------------------------------- -# Set the default compiler switches based on the --enable-symbols option. -#-------------------------------------------------------------------- - -TEA_ENABLE_SYMBOLS - -#-------------------------------------------------------------------- -# If the variable OPENSSL is set, we will build with the OpenSSL -# libraries. If it is not set, then we will use RSA BSAFE SSL-C -# libraries instead of the default OpenSSL libaries. -#-------------------------------------------------------------------- - -OPENSSL="1" - -TLS_CHECK_SSL - -#-------------------------------------------------------------------- -# Determine if we should use the patented encryption code -#-------------------------------------------------------------------- - -AC_ARG_ENABLE(patents, [ --enable-patents Use patented code. Default is enabled], PATENTS=${enableval}, PATENTS=yes) - -if test ${PATENTS} = no; then - AC_DEFINE([NO_PATENTS]) -fi - -#-------------------------------------------------------------------- -# This macro generates a line to use when building a library. It -# depends on values set by the TEA_ENABLE_SHARED, TEA_ENABLE_SYMBOLS, -# and TEA_LOAD_TCLCONFIG macros above. -#-------------------------------------------------------------------- - -TEA_MAKE_LIB - -#-------------------------------------------------------------------- -# Shared libraries and static libraries have different names. -# Also, windows libraries and unix libraries have different names. -# For the OpenSSL version, I chose to use the same library names that -# OpenSSL uses as its default names. -#-------------------------------------------------------------------- - -if test "${TEA_PLATFORM}" = "windows" ; then - if test "$GCC" = "yes"; then - TEA_ADD_LIBS([-L${SSL_LIB_DIR_NATIVE}]) - else - TEA_ADD_LIBS([-libpath:${SSL_LIB_DIR_NATIVE}]) - fi - if test -n "${OPENSSL}"; then - TEA_ADD_LIBS([ssleay32.lib libeay32.lib]) - else - TEA_ADD_LIBS([sslc32.lib]) - fi -else - # Subst runtime dir here, use -R and -L where necessary. [Bug 1742859] - LIB_RUNTIME_DIR=${SSL_LIB_DIR} - eval "LD_SEARCH_FLAGS=\"${LD_SEARCH_FLAGS}\"" - if test -n "${OPENSSL}"; then - TEA_ADD_LIBS([${LD_SEARCH_FLAGS} -L${SSL_LIB_DIR} -lssl -lcrypto ${GCCPATH} ${GCCLIB}]) - else - TEA_ADD_LIBS([${LD_SEARCH_FLAGS} -L${SSL_LIB_DIR} -lsslc]) - fi -fi - -#-------------------------------------------------------------------- -# Determine the name of the tclsh and/or wish executables in the -# Tcl and Tk build directories or the location they were installed -# into. These paths are used to support running test cases only, -# the Makefile should not be making use of these paths to generate -# a pkgIndex.tcl file or anything else at extension build time. -#-------------------------------------------------------------------- - -TEA_PROG_TCLSH -#TEA_PROG_WISH - -#-------------------------------------------------------------------- -# Setup a *Config.sh.in configuration file. -#-------------------------------------------------------------------- - -TEA_EXPORT_CONFIG([tls]) -#AC_SUBST(SAMPLE_VAR) - -#-------------------------------------------------------------------- -# Specify files to substitute AC variables in. You may alternatively -# have a special pkgIndex.tcl.in or other files which require -# substituting the AC variables in. Include these here. -#-------------------------------------------------------------------- - -AC_CONFIG_FILES([Makefile pkgIndex.tcl]) -AC_CONFIG_FILES([tlsConfig.sh]) - -#-------------------------------------------------------------------- -# Finally, substitute all of the various values into the files -# specified with AC_CONFIG_FILES. -#-------------------------------------------------------------------- - -AC_OUTPUT() diff --git a/tls/fixstrtod.c b/tls/fixstrtod.c deleted file mode 100644 index 2655767..0000000 --- a/tls/fixstrtod.c +++ /dev/null @@ -1,38 +0,0 @@ -/* - * fixstrtod.c -- - * - * Source code for the "fixstrtod" procedure. This procedure is - * used in place of strtod under Solaris 2.4, in order to fix - * a bug where the "end" pointer gets set incorrectly. - * - * Copyright (c) 1995 Sun Microsystems, Inc. - * - * See the file "license.terms" for information on usage and redistribution - * of this file, and for a DISCLAIMER OF ALL WARRANTIES. - * - * SCCS: @(#) fixstrtod.c 1.5 96/02/15 12:08:21 - */ - -#include - -#undef strtod - -/* - * Declare strtod explicitly rather than including stdlib.h, since in - * somes systems (e.g. SunOS 4.1.4) stdlib.h doesn't declare strtod. - */ - -extern double strtod(); - -double -fixstrtod(string, endPtr) - char *string; - char **endPtr; -{ - double d; - d = strtod(string, endPtr); - if ((endPtr != NULL) && (*endPtr != string) && ((*endPtr)[-1] == 0)) { - *endPtr -= 1; - } - return d; -} diff --git a/tls/license.terms b/tls/license.terms deleted file mode 100644 index b62a73d..0000000 --- a/tls/license.terms +++ /dev/null @@ -1,38 +0,0 @@ -This software is copyrighted by Matt Newman and other parties. -The following terms apply to all files associated with the software -unless explicitly disclaimed in individual files. - -The authors hereby grant permission to use, copy, modify, distribute, -and license this software and its documentation for any purpose, provided -that existing copyright notices are retained in all copies and that this -notice is included verbatim in any distributions. No written agreement, -license, or royalty fee is required for any of the authorized uses. -Modifications to this software may be copyrighted by their authors -and need not follow the licensing terms described here, provided that -the new terms are clearly indicated on the first page of each file where -they apply. - -IN NO EVENT SHALL THE AUTHORS OR DISTRIBUTORS BE LIABLE TO ANY PARTY -FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES -ARISING OUT OF THE USE OF THIS SOFTWARE, ITS DOCUMENTATION, OR ANY -DERIVATIVES THEREOF, EVEN IF THE AUTHORS HAVE BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGE. - -THE AUTHORS AND DISTRIBUTORS SPECIFICALLY DISCLAIM ANY WARRANTIES, -INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT. THIS SOFTWARE -IS PROVIDED ON AN "AS IS" BASIS, AND THE AUTHORS AND DISTRIBUTORS HAVE -NO OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR -MODIFICATIONS. - -GOVERNMENT USE: If you are acquiring this software on behalf of the -U.S. government, the Government shall have only "Restricted Rights" -in the software and related documentation as defined in the Federal -Acquisition Regulations (FARs) in Clause 52.227.19 (c) (2). If you -are acquiring the software on behalf of the Department of Defense, the -software shall be classified as "Commercial Computer Software" and the -Government shall have only "Restricted Rights" as defined in Clause -252.227-7013 (c) (1) of DFARs. Notwithstanding the foregoing, the -authors grant the U.S. Government and others acting in its behalf -permission to use and distribute the software in accordance with the -terms specified in this license. diff --git a/tls/pkgIndex.tcl.in b/tls/pkgIndex.tcl.in deleted file mode 100644 index d7566b4..0000000 --- a/tls/pkgIndex.tcl.in +++ /dev/null @@ -1,5 +0,0 @@ -# -# Tcl package index file -# -package ifneeded @PACKAGE_NAME@ @PACKAGE_VERSION@ \ - [list load [file join $dir @PKG_LIB_FILE@] @PACKAGE_NAME@] diff --git a/tls/tclOpts.h b/tls/tclOpts.h deleted file mode 100644 index 4a0b3b7..0000000 --- a/tls/tclOpts.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * Copyright (C) 1997-2000 Matt Newman - * - * $Header: /cvsroot/tls/tls/tclOpts.h,v 1.2 2000/01/20 01:49:31 aborr Exp $ - * - * Stylized option processing - requires consitent - * external vars: opt, idx, objc, objv - */ -#ifndef _TCL_OPTS_H -#define _TCL_OPTS_H - -#define OPT_PROLOG(option) \ - if (strcmp(opt, (option)) == 0) { \ - if (++idx >= objc) { \ - Tcl_AppendResult(interp, \ - "no argument given for ", \ - (option), " option", \ - (char *) NULL); \ - return TCL_ERROR; \ - } -#define OPT_POSTLOG() \ - continue; \ - } -#define OPTOBJ(option, var) \ - OPT_PROLOG(option) \ - var = objv[idx]; \ - OPT_POSTLOG() - -#define OPTSTR(option, var) \ - OPT_PROLOG(option) \ - var = Tcl_GetStringFromObj(objv[idx], NULL);\ - OPT_POSTLOG() - -#define OPTINT(option, var) \ - OPT_PROLOG(option) \ - if (Tcl_GetIntFromObj(interp, objv[idx], \ - &(var)) != TCL_OK) { \ - return TCL_ERROR; \ - } \ - OPT_POSTLOG() - -#define OPTBOOL(option, var) \ - OPT_PROLOG(option) \ - if (Tcl_GetBooleanFromObj(interp, objv[idx],\ - &(var)) != TCL_OK) { \ - return TCL_ERROR; \ - } \ - OPT_POSTLOG() - -#define OPTBAD(type, list) \ - Tcl_AppendResult(interp, "bad ", (type), \ - " \"", opt, "\": must be ", \ - (list), (char *) NULL) - -#endif /* _TCL_OPTS_H */ diff --git a/tls/tclconfig/ChangeLog b/tls/tclconfig/ChangeLog deleted file mode 100644 index 9504def..0000000 --- a/tls/tclconfig/ChangeLog +++ /dev/null @@ -1,1003 +0,0 @@ -2016-03-11 Sean Woods - *tcl.m4 Fixed the search for Tcl and Wish shells under MinGW. Static builds and threaded builds - get an "s" or "t" added to the name. - -2015-08-28 Jan Nijtmans - - * tcl.m4: Rfe [00189c4afc]: Allow semi-static UCRT build on - Windows with VC 14.0 - -2013-10-08 Jan Nijtmans - - * tcl.m4: Bug [172223e008]: Wrong filename in - --disable-shared compile on MinGW - -2013-10-04 Jan Nijtmans - - * tcl.m4: stub library is no longer linked with msvcrt??.dll. - -2013-10-01 Jan Nijtmans - - * tcl.m4: Workaround for MinGW bug #2065: "gcc --shared" links - with libgcc_s_dw2-1.dll when using 64-bit division in C - -2013-07-04 Jan Nijtmans - - * tcl.m4: Bug [3324676]: AC_PROG_INSTALL incompat, - Bug [3606445]: Unneeded -DHAVE_NO_SEH=1 when not building on Windows - -2013-07-02 Jan Nijtmans - - * tcl.m4: Bug [32afa6e256]: dirent64 check is incorrect in tcl.m4 - (thanks to Brian Griffin) - -2013-06-20 Jan Nijtmans - - * tcl.m4: Use X11/Xlib.h for checking where X11 can be found - in stead of X11/XIntrinsic.h. Suggested by Pietro Cerutti. - -2013-06-04 Jan Nijtmans - - * tcl.m4: Eliminate NO_VIZ macro as current - zlib uses HAVE_HIDDEN in stead. One more last-moment - fix for FreeBSD by Pietro Cerutti - -2013-05-19 Jan Nijtmans - - * tcl.m4: Fix for FreeBSD, and remove support for old - FreeBSD versions. Patch by Pietro Cerutti - -2013-03-12 Jan Nijtmans - - * tcl.m4: Patch by Andrew Shadura, providing better support for - * three architectures they have in Debian. - -2012-08-07 Stuart Cassoff - - * tcl.m4: Added "-DNDEBUG" to CFLAGS_DEFAULT - when building with --disable-symbols. - -2012-08-07 Stuart Cassoff - - * tcl.m4: [Bug 3555058]: Checkin [30736d63f0] broke - CFLAGS_DEFAULT, LDFLAGS_DEFAULT - -2012-08-07 Stuart Cassoff - - * tcl.m4: [Bug 3511806]: Checkin [30736d63f0] broke CFLAGS - -2012-08-07 Jan Nijtmans - - * tcl.m4: [Bug 3511806]: Checkin [30736d63f0] broke CFLAGS - -2012-07-25 Jan Nijtmans - - * tcl.m4: My previous commit (2012-04-03) broke the ActiveTcl - build for AMD64, because of the quotes in "C://AMD64/cl.exe". - It turns out that the AC_TRY_COMPILE macro cannot handle that. - -2012-07-22 Stuart Cassoff - - * tcl.m4: Tidy: consistency, spelling, phrasing, whitespace. - No functional change. - -2012-04-03 Jan Nijtmans - - * tcl.m4: [Bug 3511806] Compiler checks too early - This change allows to build the cygwin and mingw32 ports of - Tcl/Tk extensions to build out-of-the-box using a native or - cross-compiler, e.g. on Cygwin, Linux or Darwin. - -2011-04-02 Jan Nijtmans - - * install-sh: Fix issue with library stripping in install-sh - (backported from kevin_walzer's patch from Tcl 8.6 trunk) - -2011-04-05 Andreas Kupries - - * tcl.m4: Applied patch by Jeff Lawson. Nicer error message when - tclConfig.sh was not found. - -2010-12-15 Stuart Cassoff - - * install-sh: Upgrade to newer install-sh and use it. - * tcl.m4: - -2010-12-14 Stuart Cassoff - - * tcl.m4: Better building on OpenBSD. - -2010-12-14 Jan Nijtmans - - * tcl.m4: when using gcc, don't try to determine Win64 SDK - -2010-12-12 Jan Nijtmans - - * tcl.m4: Determine correctly a cross-compiler-windres - -2010-11-23 Jan Nijtmans - - * tcl.m4: add some cross-compile support, borrowed from Tcl 8.6 - -2010-09-16 Jeff Hobbs - - * tcl.m4: correct HP-UX LDFLAGS (only used when building big shell) - -2010-09-14 Jeff Hobbs - - * tcl.m4: add extra if check for .manifest file generation - Add notice about package name and version being built. - -2010-09-09 Jan Nijtmans - - * tcl.m4: [FREQ #3058486] TEA_LOAD_CONFIG doesn't set all BUILD_ vars - Slightly related: defining BUILD_$1 on all platforms - not only win - - allows the -fvisibility feature to be used in extensions as well, at - least if you compile against tcl >= 8.5. - -2010-08-26 Jeff Hobbs - - * tcl.m4: ensure safe quoting for autoheader usage - -2010-08-19 Jeff Hobbs - - * tcl.m4: add TEA_ADD_CLEANFILES macro to make adding cleanfiles - easier, and add *.exp to CLEANFILES Windows default. - (TEA_MAKE_LIB): Enhanced to check for MSVC that requires manifests - and auto-embed it into proj DLL via MAKE_SHARED_LIB. Also define - VC_MANIFEST_EMBED_DLL and VC_MANIFEST_EMBED_EXE that do the same - magic in case it is needed for extended TEA projects. - -2010-08-16 Jeff Hobbs - - *** Bump to TEA_VERSION 3.9 *** - If upgrading from TEA_VERSION 3.8, copy over tcl.m4, change - TEA_INIT to use 3.9 and reconfigure (ac-2.59+). - BUILD_${PACKAGE_NAME} will be auto-defined on Windows for - correct setting of TCL_STORAGE_CLASS. - TEA_LOAD_CONFIG users should remove the SHLIB_LD_LIBS setting done - in configure.in (LIBS will be automagically populated by - TEA_LOAD_CONFIG). - TEA_EXPORT_CONFIG has been added for ${pkg}Config.sh creators - SHLIB_LD_FLAGS was deprecated a while ago, remove it if it is - still in your Makefile.in. - - * tcl.m4: add /usr/lib64 to set of auto-search dirs. [Bug 1230554] - Auto-define BUILD_$PACKAGE_NAME so users don't need to. This - needs to correspond with $pkg.h define magic for TCL_STORAGE_CLASS. - Auto-define CLEANFILES. Users can expand it. - (SHLIB_LD_LIBS): define to '${LIBS}' default and change it only if - necessary. Platforms not using this may simply not work or have - very funky linkers. - (TEA_LOAD_CONFIG): When loading config for another extension, - auto-add stub libraries found with TEA_ADD_LIBS. Eases - configure.in for modules like itk and img::*. - (TEA_EXPORT_CONFIG): Add standardized function for exporting a - ${pkg}Config.sh. See use by img::* and itcl. - -2010-08-12 Jeff Hobbs - - *** Bump to TEA_VERSION 3.8 *** - If upgrading from TEA_VERSION 3.7, copy over tcl.m4, change - TEA_INIT to use 3.8 and reconfigure (ac-2.59+). - No other changes should be necessary. - - * tcl.m4: remove more vestigial bits from removed platforms. - Add back SCO_SV-3.2*. - Remove use of DL_LIBS and DL_OBJS and related baggage - these are - only needed by the core to support 'load'. - Allow for macosx in TEA_ADD_SOURCES. - Correct check for found_xincludes=no in TEA_PATH_UNIX_X. - -2010-08-11 Jeff Hobbs - - * tcl.m4: remove the following old platform configurations: - UNIX_SV*|UnixWare-5*, SunOS-4.*, SINIX*5.4*, SCO_SV-3.2*, - OSF1-1.*, NEXTSTEP-*, NetBSD-1.*|FreeBSD-[[1-2]].*, MP-RAS-*, - IRIX-5.*, HP-UX-*.08.*|HP-UX-*.09.*|HP-UX-*.10.*, dgux*, - BSD/OS-2.1*|BSD/OS-3* - (AIX): drop AIX-pre4 support and use of ldAix, use -bexpall/-brtl - -2010-07-05 Jan Nijtmans - - * tcl.m4: [Patch #1055668] removal of exported internals from - tclInt.h (EXTERN macro) - -2010-04-14 Jan Nijtmans - - * tcl.m4 - Backport a lot of quoting fixes from tcl8.6/unix/tcl.m4 - - Fix determination of CYGPATH for CYGWIN - With those fixes, itcl and tdbc compile fine with CYGWIN - -2010-04-06 Jan Nijtmans - - * install-sh [Bug 2982540] configure and install* script files - should always have LF - -2010-02-19 Stuart Cassoff - - * tcl.m4: Correct compiler/linker flags for threaded builds on - OpenBSD. - -2010-01-19 Jan Nijtmans - - * tcl.m4: Detect CYGWIN variant: win32 or unix - -2010-01-03 Donal K. Fellows - - * unix/tcl.m4 (TEA_CONFIG_CFLAGS): [Tcl Bug 1636685]: Use the - configuration for modern FreeBSD suggested by the FreeBSD porter. - -2009-10-22 Jan Nijtmans - - * tcl.m4: [Tcl Patch #2883533] tcl.m4 support for Haiku OS - -2009-04-27 Jeff Hobbs - - * tcl.m4 (TEA_CONFIG_CFLAGS): harden the check to add _r to CC on - AIX with threads. - -2009-04-10 Daniel Steffen - - * tcl.m4 (Darwin): check for 64-bit TkAqua. - -2009-03-26 Jan Nijtmans - - * tclconfig/tcl.m4: Adapt LDFLAGS and LD_SEARCH_FLAGS - together with SHLIB_LD definition to unbreak building on HPUX. - -2009-03-20 Andreas Kupries - - * tclconfig/tcl.m4: Changed SHLIB_LD definition to unbreak - building on HPUX. - -2009-03-16 Joe English - - * tcl.m4(TEA_PUBLIC_TK_HEADERS): Look at ${TK_INCLUDE_SPEC} - (found in tkConfig.sh) when trying to guess where tk.h might be - [Patch 1960628]. - -2009-03-11 Joe English - - * tcl.m4: Allow ${SHLIB_SUFFIX} to be overridden at - configure-time [Patch 1960628]. Also fix some comment typos, - and an uninitialized variable bug-waiting-to-happen. - -2008-12-21 Jan Nijtmans - - * tcl.m4: [Bug 2073255] Tcl_GetString(NULL) doesn't crash on HP-UX - (this bug report was for Tcl, but holds for TEA as well.) - -2008-12-20 Daniel Steffen - - * tcl.m4: sync with tdbc tcl.m4 changes - (SunOS-5.11): Sun cc SHLIB_LD: use LDFLAGS_DEFAULT instead of LDFLAGS - -2008-12-02 Jeff Hobbs - - *** Bump to TEA_VERSION 3.7 *** - - * tcl.m4: in private header check, check for Port.h instead - of Int.h to ensure all private headers are available. - -2008-11-04 Daniel Steffen - - * tcl.m4 (Darwin): sync TEA_PRIVATE_TK_HEADERS handling of - Tk.framework PrivateHeaders with TEA_PRIVATE_TCL_HEADERS. - -2008-11-04 Jeff Hobbs - - * tcl.m4 (TEA_PATH_TCLCONFIG, TEA_PATH_TKCONFIG): exit with error - when tclConfig.sh cannot be found. [Bug #1997760] - (TEA_PRIVATE_TCL_HEADERS, TEA_PRIVATE_TK_HEADERS): allow for - finding the headers installed in the public areas, e.g. a result of - make install-private-headers. [Bug #1631922] - -2008-08-12 Daniel Steffen - - * tcl.m4 (Darwin): link shlib with current and compatiblity version - flags; look for libX11.dylib when searching for X11 libraries. - -2008-06-12 Daniel Steffen - - * tcl.m4 (SunOS-5.11): fix 64bit amd64 support with gcc & Sun cc. - -2008-03-27 Daniel Steffen - - * tcl.m4 (SunOS-5.1x): fix 64bit support for Sun cc. [Bug 1921166] - -2008-02-01 Donal K. Fellows - - * tcl.m4 (TEA_CONFIG_CFLAGS): Updated to work at least in part with - more modern VC versions. Currently just made the linker flags more - flexible; more work may be needed. - -2007-10-26 Daniel Steffen - - * tcl.m4 (Darwin): add support for 64-bit X11. - -2007-10-23 Jeff Hobbs - - *** Tagged tea-3-branch to start TEA 4 development on HEAD *** - -2007-09-17 Joe English - - * tcl.m4: use '${CC} -shared' instead of 'ld -Bshareable' - to build shared libraries on current NetBSDs [Bug 1749251]. - -2007-09-15 Daniel Steffen - - * tcl.m4: replace all direct references to compiler by ${CC} to - enable CC overriding at configure & make time. - (SunOS-5.1x): replace direct use of '/usr/ccs/bin/ld' in SHLIB_LD by - 'cc' compiler driver. - -2007-08-08 Jeff Hobbs - - * tcl.m4: check Ttk dir for Tk private headers (8.5). - Add some comments to other bits. - -2007-06-25 Jeff Hobbs - - * tcl.m4 (TEA_PROG_TCLSH, TEA_PROG_WISH): move where / is added. - -2007-06-13 Jeff Hobbs - - * tcl.m4: fix --with-tkinclude alignment. [Bug 1506111] - -2007-06-06 Daniel Steffen - - * tcl.m4 (Darwin): fix 64bit arch removal in fat 32&64bit builds. - -2007-05-18 Donal K. Fellows - - * tcl.m4: Added quoting so that paths with spaces cause fewer - problems. - -2007-03-07 Daniel Steffen - - * tcl.m4 (Darwin): s/CFLAGS/CPPFLAGS/ in -mmacosx-version-min check. - -2007-02-15 Jeff Hobbs - - * tcl.m4: correct private header check to search in generic subdir - -2007-02-09 Jeff Hobbs - - *** Bump to TEA_VERSION 3.6 *** - - * tcl.m4: correct -d to -f - (TEA_CONFIG_CFLAGS): SHLIB_SUFFIX is .so on HP ia64 [Bug 1615058] - -2007-02-08 Jeff Hobbs - - * tcl.m4 (TEA_PRIVATE_TCL_HEADERS, TEA_PRIVATE_TK_HEADERS): check - that the dirs actually have private headers. [Bug 1631922] - -2007-02-04 Daniel Steffen - - * tcl.m4: add caching to -pipe check. - -2007-01-25 Daniel Steffen - - * tcl.m4: integrate CPPFLAGS into CFLAGS as late as possible and - move (rather than duplicate) -isysroot flags from CFLAGS to CPPFLAGS to - avoid errors about multiple -isysroot flags from some older gcc builds. - -2006-01-19 Daniel Steffen - - * tcl.m4: ensure CPPFLAGS env var is used when set. [Bug 1586861] - (Darwin): add -isysroot and -mmacosx-version-min flags to CPPFLAGS when - present in CFLAGS to avoid discrepancies between what headers configure - sees during preprocessing tests and compiling tests. - -2006-12-19 Daniel Steffen - - * tcl.m4 (Darwin): --enable-64bit: verify linking with 64bit -arch flag - succeeds before enabling 64bit build. - -2006-12-16 Daniel Steffen - - * tcl.m4 (Linux): fix previous change to use makefile variable - LDFLAGS_DEFAULT instead of LDFLAGS in SHLIB_LD, to ensure linker - flags in sampleextension Makefile are picked up. - -2006-11-26 Daniel Steffen - - * tcl.m4 (Linux): --enable-64bit support. [Patch 1597389], [Bug 1230558] - -2006-08-18 Daniel Steffen - - * tcl.m4 (Darwin): add support for --enable-64bit on x86_64, for - universal builds including x86_64 and for use of -mmacosx-version-min - instead of MACOSX_DEPLOYMENT_TARGET. For Tk extensions, remove 64-bit - arch flags from CFLAGS like in the Tk configure, as neither TkAqua nor - TkX11 can be built for 64-bit at present. - -2006-03-28 Jeff Hobbs - - * tcl.m4: []-quote AC_DEFUN functions. - (TEA_PATH_TKCONFIG): Fixed Windows-specific check for tkConfig.sh. - (TEA_MAKE_LIB): Prepend 'lib' for Windows-gcc configs. - -2006-03-07 Joe English - - * tcl.m4: Set SHLIB_LD_FLAGS='${LIBS}' on NetBSD, - as per the other *BSD variants [Bug 1334613]. - -2006-01-25 Jeff Hobbs - - *** Bump to TEA version 3.5 *** - - * tcl.m4: keep LD_SEARCH_FLAGS and CC_SEARCH_FLAGS synchronous - with core tcl.m4 meaning. - -2006-01-24 Daniel Steffen - - * tcl.m4 (Darwin): use makefile variable LDFLAGS_DEFAULT instead of - LDFLAGS in SHLIB_LD, to ensure linker flags in sampleextension Makefile - are picked up. [Bug 1403343] - -2006-01-23 Jeff Hobbs - - * tcl.m4: add C:/Tcl/lib and C:/Progra~1/Tcl/lib dirs to check for - *Config.sh on Windows. [Bug 1407544] - -2006-01-23 Daniel Steffen - - * tcl.m4 (Darwin): for Tk extensions, remove -arch ppc64 from CFLAGS - like in the Tk configure, as neither TkAqua nor TkX11 can be built for - 64bit at present (no 64bit GUI libraries). - -2006-01-22 Jeff Hobbs - - * tcl.m4: restore system=windows on Windows. - Remove error if 'ar' isn't found (it may not be on Windows). - Do not add -lxnet or define _XOPEN_SOURCE on HP-UX by default. - Ensure the C|LDFLAGS_DEFAULT gets the fully sub'd value at - configure time. - -2006-01-10 Daniel Steffen - - * tcl.m4: add caching, use AC_CACHE_CHECK instead of AC_CACHE_VAL - where possible, consistent message quoting, sync relevant - tcl/unix/tcl.m4 HEAD changes and gratuitous formatting differences - (notably sunc removal of support for for ancient BSD's, IRIX 4, - RISCos and Ultrix by kennykb), Darwin improvements to - TEA_LOAD_*CONFIG to make linking work against Tcl/Tk frameworks - installed in arbitrary location, change TEA_PROG_* search order - (look in *_BIN_DIR parents before *_PREFIX). - -2006-01-05 Jeff Hobbs - - * tcl.m4: add dkf's system config refactor - -2006-01-04 Jeff Hobbs - - * tcl.m4: remove extraneous ' that causes bash 3.1 to choke - -2005-12-19 Joe English - - * tcl.m4 (TEA_PATH_TCLCONFIG &c): Look for tclConfig.sh &c - in ${libdir}, where they are installed by default [Patch #1377407]. - -2005-12-05 Don Porter - - * tcl.m4 (TEA_PUBLIC_*_HEADERS): Better support for finding - header files for uninstalled Tcl and Tk. - -2005-12-02 Jeff Hobbs - - * tcl.m4: correctly bump TEA_VERSION var to 3.4 - -2005-12-01 Daniel Steffen - - * unix/tcl.m4 (Darwin): fixed error when MACOSX_DEPLOYMENT_TARGET unset - -2005-11-29 Jeff Hobbs - - * tcl.m4: *** Bump to TEA version 3.4 *** - Add Windows x64 build support. - Remove TEA_PATH_NOSPACE and handle the problem with ""s where - necessary - the macro relied on TCLSH_PROG which didn't work for - cross-compiles. - -2005-11-27 Daniel Steffen - - * tcl.m4 (Darwin): add 64bit support, add CFLAGS to SHLIB_LD to - support passing -isysroot in env(CFLAGS) to configure (flag can't - be present twice, so can't be in both CFLAGS and LDFLAGS during - configure), don't use -prebind when deploying on 10.4. - (TEA_ENABLE_LANGINFO, TEA_TIME_HANDLER): add/fix caching. - -2005-10-30 Daniel Steffen - - * tcl.m4: fixed two tests for TEA_WINDOWINGSYSTEM = "aqua" that - should have been for `uname -s` = "Darwin" instead; added some - missing quoting. - (TEA_PROG_TCLSH, TEA_PROG_WISH): fix incorrect assumption that - install location of tclConfig.sh/tkConfig.sh allows to determine - the tclsh/wish install dir via ../bin. Indeed tcl/tk can be - configured with arbitrary --libdir and --bindir (independent of - prefix) and such a configuration is in fact standard with Darwin - framework builds. At least now also check ${TCL_PREFIX}/bin - resp. ${TK_PREFIX}/bin for presence of tclsh resp. wish (if tcl/tk - have been configured with arbitrary --bindir, this will still not - find them, for a general solution *Config.sh would need to contain - the values of bindir/libdir/includedir passed to configure). - -2005-10-07 Jeff Hobbs - - * tcl.m4: Fix Solaris 5.10 check and Solaris AMD64 64-bit builds. - -2005-10-04 Jeff Hobbs - - * tcl.m4 (TEA_PRIVATE_TCL_HEADERS): add / to finish sed macro - (TEA_ENABLE_THREADS): don't check for pthread_attr_setstacksize func - -2005-09-13 Jeff Hobbs - - * tcl.m4: *** Update to TEA version 3.3 *** - define TEA_WINDOWINGSYSTEM in TEA_LOAD_TKCONFIG. - Make --enable-threads the default (users can --disable-threads). - Improve AIX ${CC}_r fix to better check existing ${CC} value. - Do the appropriate evals to not require the *TOP_DIR_NATIVE vars - be set for extensions that use private headers. - Make aqua check for Xlib compat headers the same as win32. - -2005-07-26 Mo DeJong - - * tcl.m4 (TEA_PROG_TCLSH, TEA_BUILD_TCLSH, - TEA_PROG_WISH, TEA_BUILD_WISH): Remove - TEA_BUILD_TCLSH and TEA_BUILD_WISH because - of complaints that it broke the build when - only an installed version of Tcl was available - at extension build time. The TEA_PROG_TCLSH and - TEA_PROG_WISH macros will no longer search the - path at all. The build tclsh or installed - tclsh shell will now be found by TEA_PROG_TCLSH. - -2005-07-24 Mo DeJong - - * tcl.m4 (TEA_PROG_TCLSH, TEA_BUILD_TCLSH, - TEA_PROG_WISH, TEA_BUILD_WISH): - Split confused search for tclsh on PATH and - build and install locations into two macros. - TEA_PROG_TCLSH and TEA_PROG_WISH search the - system PATH for an installed tclsh or wish. - The TEA_BUILD_TCLSH and TEA_BUILD_WISH - macros determine the name of tclsh or - wish in the Tcl or Tk build directory even - if tclsh or wish has not yet been built. - [Tcl bug 1160114] - [Tcl patch 1244153] - -2005-06-23 Daniel Steffen - - * tcl.m4 (TEA_PRIVATE_TK_HEADERS): add ${TK_SRC_DIR}/macosx to - TK_INCLUDES when building against TkAqua. - - * tcl.m4 (TEA_PATH_X): fixed missing comma in AC_DEFINE - - * tcl.m4: changes to better support framework builds of Tcl and Tk out - of the box: search framework install locations for *Config.sh, and if in - presence of a framework build, use the framework's Headers and - PrivateHeaders directories for public and private includes. [FR 947735] - -2005-06-18 Daniel Steffen - - * tcl.m4 (Darwin): add -headerpad_max_install_names to LDFLAGS to - ensure we can always relocate binaries with install_name_tool. - -2005-06-04 Daniel Steffen - - * tcl.m4 (TEA_PATH_X): for TEA_WINDOWINGSYSTEM == aqua, check if xlib - compat headers are available in tkheaders location, otherwise add xlib - sourcedir to TK_XINCLUDES. - -2005-04-25 Daniel Steffen - - * tcl.m4: added AC_DEFINE* descriptions (from core tcl.m4) to allow - use with autoheader. - (Darwin): added configure checks for recently added linker flags - -single_module and -search_paths_first to allow building with older - tools (and on Mac OS X 10.1), use -single_module in SHLIB_LD. - (TEA_MISSING_POSIX_HEADERS): added caching of dirent.h check. - (TEA_BUGGY_STRTOD): added caching (sync with core tcl.m4). - -2005-03-24 Jeff Hobbs - - * tcl.m4 (TEA_TCL_64BIT_FLAGS): use Tcl header defaults for wide - int type only on Windows when __int64 is detected as valid. - -2005-03-24 Don Porter - - * README.txt: Update reference to "SC_* macros" to "TEA_* macros". - * tcl.m4: Incorporated recent improvements in SC_PATH_TCLCONFIG - and SC_PATH_TKCONFIG into TEA_PATH_TCLCONFIG and TEA_PATH_TKCONFIG. - Corrected search path in TEA_PATH_CONFIG and added - AC_SUBST($1_BIN_DIR) to TEA_LOAD_CONFIG so that packages that load - the configuration of another package can know where they loaded - it from. - -2005-03-18 Jeff Hobbs - - * tcl.m4 (TEA_CONFIG_CFLAGS): correct 2005-03-17 change to have - variant LD_SEARCH_FLAGS for gcc and cc builds. - - * tcl.m4 (TEA_PROG_TCLSH, TEA_PROG_WISH): correct x-compile check. - -2005-03-17 Jeff Hobbs - - * tcl.m4: Correct gcc build and HP-UX-11. - -2005-02-08 Jeff Hobbs - - * tcl.m4 (TEA_ADD_LIBS): don't touch lib args starting with -. - (TEA_CONFIG_CFLAGS): only define _DLL for CE in shared build. - (TEA_MAKE_LIB): set RANLIB* to : on Windows (it's not needed). - -2005-02-01 Jeff Hobbs - - * tcl.m4: redo of 2005-01-27 changes to correctly handle paths - with spaces. Win/CE and Win/64 builds now require a prebuilt - tclsh to handle conversion to short pathnames. This is done in - the new TEA_PATH_NOSPACE macro. For Win/CE|64, make CC just the - compiler and move the necessary includes to CFLAGS. - (TEA_CONFIG_CFLAGS): Add Solaris 64-bit gcc build support. - (TEA_PROG_TCLSH, TEA_PROG_WISH): Allow TCLSH_PROG and WISH_PROG to - be set in the env and prevent resetting. - (TEA_ADD_LIBS): On Windows using GCC (mingw), convert foo.lib - args to -lfoo, for use with mingw. - *** POTENTIAL INCOMPATABILITY *** - (TEA_CONFIG_CFLAGS): Fix AIX gcc builds to work out-of-box. - Bumped TEA to 3.2. - -2005-01-27 Jeff Hobbs - - * tcl.m4: remove cygpath calls to support msys. - Update base CE build assumption to "420,ARMV4,ARM,Pocket PC 2003". - Make STLIB_LD use $LINKBIN -lib. - -2005-01-25 Daniel Steffen - - * tcl.m4 (Darwin): fixed bug with static build linking to dynamic - library in /usr/lib etc instead of linking to static library earlier - in search path. [Tcl Bug 956908] - Removed obsolete references to Rhapsody. - -2004-12-29 Jeff Hobbs - - * tcl.m4: Updates for VC7 compatibility, fixing CFLAGS and LDFLAGS - options, using better default -O levels. [Bug 1092952, 1091967] - -2004-12-29 Joe English - - * tcl.m4: Do not use ${DBGX} suffix when building - shared libraries [patch #1081595, TIP #34] - -2004-09-07 Jeff Hobbs - - * tcl.m4 (TEA_CONFIG_CFLAGS): support eVC4 Win/CE builds - -2004-08-10 Jeff Hobbs - - * tcl.m4 (TEA_INIT, TEA_PREFIX): update handling of exec_prefix to - work around subdir configures since autoconf only propagates the - prefix (not exec_prefix). - -2004-07-23 Daniel Steffen - - * tcl.m4 (TEA_CONFIG_CFLAGS): Darwin section: brought inline with - Tcl 8.5 HEAD config, removed core specific & obsolete settings. - -2004-07-22 Jeff Hobbs - - * tcl.m4 (TEA_PATH_X): check in TK_DEFS for MAC_OSX_TK to see if - we are compiling on Aqua. Add TEA_WINDOWINGSYSTEM var that - reflects 'tk windowingsystem' value. - -2004-07-16 Jeff Hobbs - - * tcl.m4 (TEA_ENABLE_THREADS): force a threaded build when - building against a threaded core. - (CFLAGS_WARNING): Remove -Wconversion for gcc builds - (TEA_CONFIG_CFLAGS): Reorder configure.in for better 64-bit build - configuration, replacing EXTRA_CFLAGS with CFLAGS. [Bug #874058] - Update to latest Tcl 8.5 head config settings. - Call this TEA version 3.1. - -2004-04-29 Jeff Hobbs - - * tcl.m4 (TEA_TCL_64BIT_FLAGS): replace AC_TRY_RUN test with - AC_TRY_COMPILE for the long vs. long long check. (kenny) - -2004-04-26 Jeff Hobbs - - * tcl.m4 (TEA_TCL_64BIT_FLAGS): update against core tcl.m4 to - define TCL_WIDE_INT_IS_LONG if 'using long'. - -2004-03-19 Jeff Hobbs - - * tcl.m4: correct Windows builds getting LDFLAGS info in MAKE_LIB - -2004-02-11 Jeff Hobbs - - * tcl.m4: correct TCL_INCLUDES for private headers on Windows - it - doesn't need the eval. - -2004-02-10 Jeff Hobbs - - * tcl.m4: don't require TK_INCLUDES and TCL_INCLUDES to have the - DIR_NATIVE vars defined when using private headers on unix. - Allow $... to TEA_ADD_SOURCES for constructs like - TEA_ADD_SOURCES([\$(WIN_OBJECTS)]), that allow the developer to - place more in the Makefile.in. - tkUnixPort.h checks for HAVE_LIMITS_H, so do both HAVE and - CHECK on limits.h - -2003-12-10 Jeff Hobbs - - * Makefile.in: added TEA_ADD_LIBS, TEA_ADD_INCLUDES and - * configure: TEA_ADD_CFLAGS to configurable parameters with - * configure.in: PKG_* equivs in the Makefile. This allows the - * tclconfig/tcl.m4: user to worry less about actual magic VAR names. - Corrected Makefile.in to note that TEA_ADD_TCL_SOURCES requires - exact file names. - -2003-12-09 Jeff Hobbs - - * tcl.m4: updated OpenBSD support based on [Patch #775246] (cassoff) - -2003-12-05 Jeff Hobbs - - * configure: - * configure.in: - * Makefile.in (VPATH): readd $(srcdir) to front of VPATH as the - first part of VPATH can get chopped off. - Change .c.$(OBJEXT) rule to .c.@OBJEXT@ to support more makes. - * tclconfig/tcl.m4: add TEA_ADD_STUB_SOURCES to support libstub - generation and TEA_ADD_TCL_SOURCES to replace RUNTIME_SOURCES as - the way the user specifies library files. - -2003-12-03 Jeff Hobbs - - * configure: Update of TEA spec to (hopefully) simplify - * configure.in: some aspects of TEA by making use of more - * Makefile.in: AC 2.5x features. Use PACKAGE_NAME (instead - * generic/tclsample.c: of PACKAGE) and PACKAGE_VERSION (instead of - * tclconfig/tcl.m4: VERSION) arguments to AC_INIT as the TEA - package name and version. - Provide a version argument to TEA_INIT - starting with 3.0. - Drop all use of interior shell substs that older makefiles didn't - like. Use PKG_* naming convention instead. - Move specification of source files and public headers into - configure.in with TEA_ADD_SOURCES and TEA_ADD_HEADERS. These will - be munged during ./configure into the right obj file names (no - $(SOURCES:.c=.obj) needed). - There is almost nothing that should be touched in Makefile.in now - for the developer. May want to add a TEA_ADD_TCL_SOURCES for the - RUNTIME_SOURCES that remains. - Use SHLID_LD_FLAGS (instead of SHLID_LDFLAGS) as Tcl does. - Only specify the user requested LDFLAGS/CFLAGS in the Makefile, - don't mention the _OPTIMIZE/_DEBUG variants. - -2003-10-15 Jeff Hobbs - - * tcl.m4: create a TEA_SETUP_COMPILER_CC the precedes the - TEA_SETUP_COMPILER macro. They are split so the check for CC - occurs before any use of CC. Also add AC_PROG_CPP to the compiler - checks. - -2003-10-06 Jeff Hobbs - - * tcl.m4: Updated for autoconf 2.5x prereq. - Where TCL_WIDE_INT_TYPE would be __int64, defer to the code checks - in tcl.h, which also handles TCL_LL_MODIFIER* properly. - -2003-04-22 Jeff Hobbs - - * tcl.m4: correct default setting of ARCH for WinCE builds. - Correct \ escaping for CE sed macros. - -2003-04-10 Jeff Hobbs - - * tcl.m4: replace $(syscal) construct with older `syscall` for - systems where sh != bash. - -2003-04-09 Jeff Hobbs - - * tcl.m4 (TEA_WITH_CELIB): add --enable-wince and --with-celib - options for Windows/CE compilation support. Requires the - Microsoft eMbedded SDK and Keuchel's celib emulation layer. - -2003-02-18 Jeff Hobbs - - * tcl.m4 (TEA_ENABLE_THREADS): Make sure -lpthread gets passed on - the link line when checking for the pthread_attr_setstacksize - symbol. (dejong) - - * tcl.m4 (TEA_SETUP_COMPILER): added default calls to - TEA_TCL_EARLY_FLAGS, TEA_TCL_64BIT_FLAGS, - TEA_MISSING_POSIX_HEADERS and TEA_BUGGY_STRTOD. - -2003-02-14 Jeff Hobbs - - * tcl.m4: correct HP-UX ia64 --enable-64bit build flags - -2003-01-29 Jeff Hobbs - - * tcl.m4: check $prefix/lib as well as $exec_prefix/lib when - looking for tcl|tkConfig.sh, as this check is done before we would - set exec_prefix when the user does not define it. - -2003-01-21 Mo DeJong - - * tcl.m4 (TEA_CONFIG_CFLAGS): Fix build support - for mingw, the previous implementation would - use VC++ when compiling with mingw gcc. Don't - pass -fPIC since gcc always compiles pic code - under win32. Change some hard coded cases - of gcc to ${CC}. - -2002-10-15 Jeff Hobbs - - * tcl.m4: move the CFLAGS definition from TEA_ENABLE_SHARED to - TEA_MAKE_LIB because setting too early confuses other AC_* macros. - Correct the HP-11 SHLIB_LD_LIBS setting. - - * tcl.m4: add the CFLAGS definition into TEA_ENABLE_SHARED and - make it pick up the env CFLAGS at configure time. - -2002-10-09 Jeff Hobbs - - * tcl.m4: add --enable-symbols=mem option to enable TCL_MEM_DEBUG. - Improved AIX 64-bit build support, allow it on AIX-4 as well. - Enable 64-bit HP-11 compilation with gcc. - Enable 64-bit IRIX64-6 cc build support. - Correct FreeBSD thread library linkage. - Add OSF1 static build support. - Improve SunOS-5 shared build SHLIB_LD macro. - -2002-07-20 Zoran Vasiljevic - - * tcl.m4: Added MINGW32 to list of systems checked for Windows build. - Also, fixes some indentation issues with "--with-XXX" options. - -2002-04-23 Jeff Hobbs - - * tcl.m4 (TEA_ENABLE_THREADS): added USE_THREAD_ALLOC define to - use new threaded allocatory by default on Unix for Tcl 8.4. - (TEA_CONFIG_CFLAGS): corrected LD_SEARCH_FLAGS for FreeBSD-3+. - -2002-04-22 Jeff Hobbs - - * tcl.m4 (TEA_SETUP_COMPILER): removed call to AC_CYGWIN so that - we can use autoconf 2.5x as well as 2.13. This prevents us from - being able to warn against the use of cygwin gcc at configure - time, but allows autoconf 2.5x, which is what is shipped with most - newer systems. - -2002-04-11 Jeff Hobbs - - * tcl.m4: Enabled COFF as well as CV style debug info with - --enable-symbols to allow Dr. Watson users to see function info. - More info on debugging levels can be obtained at: - http://msdn.microsoft.com/library/en-us/dnvc60/html/gendepdebug.asp - -2002-04-03 Jeff Hobbs - - * tcl.m4: change all SC_* macros to TEA_*. The SC_ was for - Scriptics, which is no more. TEA represents a better, independent - prefix that won't need changing. - Added preliminary mingw gcc support. [Patch #538772] - Added TEA_PREFIX macro that handles defaulting the prefix and - exec_prefix vars to those used by Tcl if none were specified. - Added TEA_SETUP_COMPILER macro that encompasses the AC_PROG_CC - check and several other basic AC_PROG checks needed for making - executables. This greatly simplifies user's configure.in files. - Collapsed AIX-5 defines into AIX-* with extra checks for doing the - ELF stuff on AIX-5-ia64. - Updated TEA_ENABLE_THREADS to take an optional arg to allow - switching it on by default (for Thread) and add sanity checking to - warn the user if configuring threads incompatibly. - -2002-03-29 Jeff Hobbs - - * tcl.m4: made sure that SHLIB_LDFLAGS was set to LDFLAGS_DEFAULT. - Removed --enable-64bit support for AIX-4 because it wasn't correct. - Added -MT or -MD Windows linker switches to properly support - symbols-enabled builds. - -2002-03-28 Jeff Hobbs - - * tcl.m4: called AC_MSG_ERROR when SC_TEA_INIT wasn't called first - instead of calling it as that inlines it each time in shell code. - Changed Windows CFLAGS_OPTIMIZE to use -O2 instead of -Oti. - Noted TCL_LIB_VERSIONS_OK=nodots for Windows builds. - A few changes to support itcl (and perhaps others): - Added support for making your own stub libraries to SC_MAKE_LIB. - New SC_PATH_CONFIG and SC_LOAD_CONFIG that take a package name arg - and find that ${pkg}Config.sh file. itk uses this for itcl. - -2002-03-27 Jeff Hobbs - - * tcl.m4: made SC_LOAD_TKCONFIG recognize when working with a Tk - build dir setup. - Added EXTRA_CFLAGS and SHLIB_LD_LIBS substs to SC_CONFIG_CFLAGS. - Added XLIBSW onto LIBS when it is defined. - Remove TCL_LIBS from MAKE_LIB and correctly use SHLIB_LD_LIBS - instead to not rely as much on tclConfig.sh cached info. - Add TK_BIN_DIR to paths to find wish in SC_PROG_WISH. - These move towards making TEA much more independent of *Config.sh. - -2002-03-19 Jeff Hobbs - - * tcl.m4: corrected forgotten (UN)SHARED_LIB_SUFFIX and - SHLIB_SUFFIX defines for Win. - (SC_PATH_X): made this only do the check on unix platforms. - -2002-03-12 Jeff Hobbs - - * README.txt: updated to reflect fewer files - -2002-03-06 Jeff Hobbs - - * config.guess (removed): - * config.sub (removed): removed unnecessary files - - * installFile.tcl (removed): - * mkinstalldirs (removed): these aren't really necessary for - making TEA work - - * tcl.m4 (SC_PUBLIC_TCL_HEADERS, SC_PUBLIC_TK_HEADERS): don't - check /usr(/local)/include for includes on Windows when not using - gcc - -2002-03-05 Jeff Hobbs - - * tcl.m4: added warnings on Windows, removed RELPATH define and - added TCL_LIBS to MAKE_LIB macro. - - This import represents 2.0.0, or a new start at attempting to - make TEA much easier for C extension developers. - - **** moved from tclpro project to core tcl project, **** - **** renamed to 'tclconfig' **** - -2001-03-15 Karl Lehenbauer - - * installFile.tcl: Added updating of the modification time of - the target file whether we overwrote it or decided that it - hadn't changed. This was necessary for us to be able to - determine whether or not a module install touched the file. - -2001-03-08 Karl Lehenbauer - - * installFile.tcl: Added support for converting new-style (1.1+) - Cygnus drive paths to Tcl-style. - -2001-01-15 - - * tcl.m4: Added FreeBSD clause. - -2001-01-03 - - * tcl.m4: Fixed typo in SC_LIB_SPEC where it is checking - for exec-prefix. - -2000-12-01 - - * tcl.m4: Concatenated most of the Ajuba acsite.m4 file - so we don't need to modify the autoconf installation. - * config.guess: - * config.sub: - * installFile.tcl: - Added files from the itcl config subdirectory, - which should go away. - -2000-7-29 - - * Fixed the use of TCL_SRC_DIR and TK_SRC_DIR within - TCL_PRIVATE_INCLUDES and TK_PRIVATE_INCLUDES to match their recent - change from $(srcdir) to $(srcdir)/.. diff --git a/tls/tclconfig/README.txt b/tls/tclconfig/README.txt deleted file mode 100644 index 59b5a3e..0000000 --- a/tls/tclconfig/README.txt +++ /dev/null @@ -1,26 +0,0 @@ -These files comprise the basic building blocks for a Tcl Extension -Architecture (TEA) extension. For more information on TEA see: - - http://www.tcl.tk/doc/tea/ - -This package is part of the Tcl project at SourceForge, and latest -sources should be available there: - - http://tcl.sourceforge.net/ - -This package is a freely available open source package. You can do -virtually anything you like with it, such as modifying it, redistributing -it, and selling it either in whole or in part. - -CONTENTS -======== -The following is a short description of the files you will find in -the sample extension. - -README.txt This file - -install-sh Program used for copying binaries and script files - to their install locations. - -tcl.m4 Collection of Tcl autoconf macros. Included by a package's - aclocal.m4 to define TEA_* macros. diff --git a/tls/tclconfig/install-sh b/tls/tclconfig/install-sh deleted file mode 100755 index 7c34c3f..0000000 --- a/tls/tclconfig/install-sh +++ /dev/null @@ -1,528 +0,0 @@ -#!/bin/sh -# install - install a program, script, or datafile - -scriptversion=2011-04-20.01; # UTC - -# This originates from X11R5 (mit/util/scripts/install.sh), which was -# later released in X11R6 (xc/config/util/install.sh) with the -# following copyright and license. -# -# Copyright (C) 1994 X Consortium -# -# Permission is hereby granted, free of charge, to any person obtaining a copy -# of this software and associated documentation files (the "Software"), to -# deal in the Software without restriction, including without limitation the -# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or -# sell copies of the Software, and to permit persons to whom the Software is -# furnished to do so, subject to the following conditions: -# -# The above copyright notice and this permission notice shall be included in -# all copies or substantial portions of the Software. -# -# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN -# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- -# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. -# -# Except as contained in this notice, the name of the X Consortium shall not -# be used in advertising or otherwise to promote the sale, use or other deal- -# ings in this Software without prior written authorization from the X Consor- -# tium. -# -# -# FSF changes to this file are in the public domain. -# -# Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it -# when there is no Makefile. -# -# This script is compatible with the BSD install script, but was written -# from scratch. - -nl=' -' -IFS=" "" $nl" - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit=${DOITPROG-} -if test -z "$doit"; then - doit_exec=exec -else - doit_exec=$doit -fi - -# Put in absolute file names if you don't have them in your path; -# or use environment vars. - -chgrpprog=${CHGRPPROG-chgrp} -chmodprog=${CHMODPROG-chmod} -chownprog=${CHOWNPROG-chown} -cmpprog=${CMPPROG-cmp} -cpprog=${CPPROG-cp} -mkdirprog=${MKDIRPROG-mkdir} -mvprog=${MVPROG-mv} -rmprog=${RMPROG-rm} -stripprog=${STRIPPROG-strip} - -posix_glob='?' -initialize_posix_glob=' - test "$posix_glob" != "?" || { - if (set -f) 2>/dev/null; then - posix_glob= - else - posix_glob=: - fi - } -' - -posix_mkdir= - -# Desired mode of installed file. -mode=0755 - -chgrpcmd= -chmodcmd=$chmodprog -chowncmd= -mvcmd=$mvprog -rmcmd="$rmprog -f" -stripcmd= - -src= -dst= -dir_arg= -dst_arg= - -copy_on_change=false -no_target_directory= - -usage="\ -Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE - or: $0 [OPTION]... SRCFILES... DIRECTORY - or: $0 [OPTION]... -t DIRECTORY SRCFILES... - or: $0 [OPTION]... -d DIRECTORIES... - -In the 1st form, copy SRCFILE to DSTFILE. -In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. -In the 4th, create DIRECTORIES. - -Options: - --help display this help and exit. - --version display version info and exit. - - -c (ignored) - -C install only if different (preserve the last data modification time) - -d create directories instead of installing files. - -g GROUP $chgrpprog installed files to GROUP. - -m MODE $chmodprog installed files to MODE. - -o USER $chownprog installed files to USER. - -s $stripprog installed files. - -S $stripprog installed files. - -t DIRECTORY install into DIRECTORY. - -T report an error if DSTFILE is a directory. - -Environment variables override the default commands: - CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG - RMPROG STRIPPROG -" - -while test $# -ne 0; do - case $1 in - -c) ;; - - -C) copy_on_change=true;; - - -d) dir_arg=true;; - - -g) chgrpcmd="$chgrpprog $2" - shift;; - - --help) echo "$usage"; exit $?;; - - -m) mode=$2 - case $mode in - *' '* | *' '* | *' -'* | *'*'* | *'?'* | *'['*) - echo "$0: invalid mode: $mode" >&2 - exit 1;; - esac - shift;; - - -o) chowncmd="$chownprog $2" - shift;; - - -s) stripcmd=$stripprog;; - - -S) stripcmd="$stripprog $2" - shift;; - - -t) dst_arg=$2 - shift;; - - -T) no_target_directory=true;; - - --version) echo "$0 $scriptversion"; exit $?;; - - --) shift - break;; - - -*) echo "$0: invalid option: $1" >&2 - exit 1;; - - *) break;; - esac - shift -done - -if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then - # When -d is used, all remaining arguments are directories to create. - # When -t is used, the destination is already specified. - # Otherwise, the last argument is the destination. Remove it from $@. - for arg - do - if test -n "$dst_arg"; then - # $@ is not empty: it contains at least $arg. - set fnord "$@" "$dst_arg" - shift # fnord - fi - shift # arg - dst_arg=$arg - done -fi - -if test $# -eq 0; then - if test -z "$dir_arg"; then - echo "$0: no input file specified." >&2 - exit 1 - fi - # It's OK to call `install-sh -d' without argument. - # This can happen when creating conditional directories. - exit 0 -fi - -if test -z "$dir_arg"; then - do_exit='(exit $ret); exit $ret' - trap "ret=129; $do_exit" 1 - trap "ret=130; $do_exit" 2 - trap "ret=141; $do_exit" 13 - trap "ret=143; $do_exit" 15 - - # Set umask so as not to create temps with too-generous modes. - # However, 'strip' requires both read and write access to temps. - case $mode in - # Optimize common cases. - *644) cp_umask=133;; - *755) cp_umask=22;; - - *[0-7]) - if test -z "$stripcmd"; then - u_plus_rw= - else - u_plus_rw='% 200' - fi - cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; - *) - if test -z "$stripcmd"; then - u_plus_rw= - else - u_plus_rw=,u+rw - fi - cp_umask=$mode$u_plus_rw;; - esac -fi - -for src -do - # Protect names starting with `-'. - case $src in - -*) src=./$src;; - esac - - if test -n "$dir_arg"; then - dst=$src - dstdir=$dst - test -d "$dstdir" - dstdir_status=$? - else - - # Waiting for this to be detected by the "$cpprog $src $dsttmp" command - # might cause directories to be created, which would be especially bad - # if $src (and thus $dsttmp) contains '*'. - if test ! -f "$src" && test ! -d "$src"; then - echo "$0: $src does not exist." >&2 - exit 1 - fi - - if test -z "$dst_arg"; then - echo "$0: no destination specified." >&2 - exit 1 - fi - - dst=$dst_arg - # Protect names starting with `-'. - case $dst in - -*) dst=./$dst;; - esac - - # If destination is a directory, append the input filename; won't work - # if double slashes aren't ignored. - if test -d "$dst"; then - if test -n "$no_target_directory"; then - echo "$0: $dst_arg: Is a directory" >&2 - exit 1 - fi - dstdir=$dst - dst=$dstdir/`basename "$src"` - dstdir_status=0 - else - # Prefer dirname, but fall back on a substitute if dirname fails. - dstdir=` - (dirname "$dst") 2>/dev/null || - expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$dst" : 'X\(//\)[^/]' \| \ - X"$dst" : 'X\(//\)$' \| \ - X"$dst" : 'X\(/\)' \| . 2>/dev/null || - echo X"$dst" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q' - ` - - test -d "$dstdir" - dstdir_status=$? - fi - fi - - obsolete_mkdir_used=false - - if test $dstdir_status != 0; then - case $posix_mkdir in - '') - # Create intermediate dirs using mode 755 as modified by the umask. - # This is like FreeBSD 'install' as of 1997-10-28. - umask=`umask` - case $stripcmd.$umask in - # Optimize common cases. - *[2367][2367]) mkdir_umask=$umask;; - .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; - - *[0-7]) - mkdir_umask=`expr $umask + 22 \ - - $umask % 100 % 40 + $umask % 20 \ - - $umask % 10 % 4 + $umask % 2 - `;; - *) mkdir_umask=$umask,go-w;; - esac - - # With -d, create the new directory with the user-specified mode. - # Otherwise, rely on $mkdir_umask. - if test -n "$dir_arg"; then - mkdir_mode=-m$mode - else - mkdir_mode= - fi - - posix_mkdir=false - case $umask in - *[123567][0-7][0-7]) - # POSIX mkdir -p sets u+wx bits regardless of umask, which - # is incompatible with FreeBSD 'install' when (umask & 300) != 0. - ;; - *) - tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ - trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 - - if (umask $mkdir_umask && - exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 - then - if test -z "$dir_arg" || { - # Check for POSIX incompatibilities with -m. - # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or - # other-writeable bit of parent directory when it shouldn't. - # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. - ls_ld_tmpdir=`ls -ld "$tmpdir"` - case $ls_ld_tmpdir in - d????-?r-*) different_mode=700;; - d????-?--*) different_mode=755;; - *) false;; - esac && - $mkdirprog -m$different_mode -p -- "$tmpdir" && { - ls_ld_tmpdir_1=`ls -ld "$tmpdir"` - test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" - } - } - then posix_mkdir=: - fi - rmdir "$tmpdir/d" "$tmpdir" - else - # Remove any dirs left behind by ancient mkdir implementations. - rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null - fi - trap '' 0;; - esac;; - esac - - if - $posix_mkdir && ( - umask $mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" - ) - then : - else - - # The umask is ridiculous, or mkdir does not conform to POSIX, - # or it failed possibly due to a race condition. Create the - # directory the slow way, step by step, checking for races as we go. - - case $dstdir in - /*) prefix='/';; - -*) prefix='./';; - *) prefix='';; - esac - - eval "$initialize_posix_glob" - - oIFS=$IFS - IFS=/ - $posix_glob set -f - set fnord $dstdir - shift - $posix_glob set +f - IFS=$oIFS - - prefixes= - - for d - do - test -z "$d" && continue - - prefix=$prefix$d - if test -d "$prefix"; then - prefixes= - else - if $posix_mkdir; then - (umask=$mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break - # Don't fail if two instances are running concurrently. - test -d "$prefix" || exit 1 - else - case $prefix in - *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; - *) qprefix=$prefix;; - esac - prefixes="$prefixes '$qprefix'" - fi - fi - prefix=$prefix/ - done - - if test -n "$prefixes"; then - # Don't fail if two instances are running concurrently. - (umask $mkdir_umask && - eval "\$doit_exec \$mkdirprog $prefixes") || - test -d "$dstdir" || exit 1 - obsolete_mkdir_used=true - fi - fi - fi - - if test -n "$dir_arg"; then - { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && - { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && - { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || - test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 - else - - # Make a couple of temp file names in the proper directory. - dsttmp=$dstdir/_inst.$$_ - rmtmp=$dstdir/_rm.$$_ - - # Trap to clean up those temp files at exit. - trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 - - # Copy the file name to the temp name. - (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && - - # and set any options; do chmod last to preserve setuid bits. - # - # If any of these fail, we abort the whole thing. If we want to - # ignore errors from any of these, just make sure not to ignore - # errors from the above "$doit $cpprog $src $dsttmp" command. - # - { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && - { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && - { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && - { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && - - # If -C, don't bother to copy if it wouldn't change the file. - if $copy_on_change && - old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && - new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && - - eval "$initialize_posix_glob" && - $posix_glob set -f && - set X $old && old=:$2:$4:$5:$6 && - set X $new && new=:$2:$4:$5:$6 && - $posix_glob set +f && - - test "$old" = "$new" && - $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 - then - rm -f "$dsttmp" - else - # Rename the file to the real destination. - $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || - - # The rename failed, perhaps because mv can't rename something else - # to itself, or perhaps because mv is so ancient that it does not - # support -f. - { - # Now remove or move aside any old file at destination location. - # We try this two ways since rm can't unlink itself on some - # systems and the destination file might be busy for other - # reasons. In this case, the final cleanup might fail but the new - # file should still install successfully. - { - test ! -f "$dst" || - $doit $rmcmd -f "$dst" 2>/dev/null || - { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && - { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } - } || - { echo "$0: cannot unlink or rename $dst" >&2 - (exit 1); exit 1 - } - } && - - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dst" - } - fi || exit 1 - - trap '' 0 - fi -done - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" -# time-stamp-end: "; # UTC" -# End: diff --git a/tls/tclconfig/tcl.m4 b/tls/tclconfig/tcl.m4 deleted file mode 100644 index 655be25..0000000 --- a/tls/tclconfig/tcl.m4 +++ /dev/null @@ -1,4176 +0,0 @@ -# tcl.m4 -- -# -# This file provides a set of autoconf macros to help TEA-enable -# a Tcl extension. -# -# Copyright (c) 1999-2000 Ajuba Solutions. -# Copyright (c) 2002-2005 ActiveState Corporation. -# -# See the file "license.terms" for information on usage and redistribution -# of this file, and for a DISCLAIMER OF ALL WARRANTIES. - -AC_PREREQ(2.57) - -# Possible values for key variables defined: -# -# TEA_WINDOWINGSYSTEM - win32 aqua x11 (mirrors 'tk windowingsystem') -# TEA_PLATFORM - windows unix -# TEA_TK_EXTENSION - True if this is a Tk extension -# - -#------------------------------------------------------------------------ -# TEA_PATH_TCLCONFIG -- -# -# Locate the tclConfig.sh file and perform a sanity check on -# the Tcl compile flags -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --with-tcl=... -# -# Defines the following vars: -# TCL_BIN_DIR Full path to the directory containing -# the tclConfig.sh file -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_PATH_TCLCONFIG], [ - dnl TEA specific: Make sure we are initialized - AC_REQUIRE([TEA_INIT]) - # - # Ok, lets find the tcl configuration - # First, look for one uninstalled. - # the alternative search directory is invoked by --with-tcl - # - - if test x"${no_tcl}" = x ; then - # we reset no_tcl in case something fails here - no_tcl=true - AC_ARG_WITH(tcl, - AC_HELP_STRING([--with-tcl], - [directory containing tcl configuration (tclConfig.sh)]), - with_tclconfig="${withval}") - AC_MSG_CHECKING([for Tcl configuration]) - AC_CACHE_VAL(ac_cv_c_tclconfig,[ - - # First check to see if --with-tcl was specified. - if test x"${with_tclconfig}" != x ; then - case "${with_tclconfig}" in - */tclConfig.sh ) - if test -f "${with_tclconfig}"; then - AC_MSG_WARN([--with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself]) - with_tclconfig="`echo "${with_tclconfig}" | sed 's!/tclConfig\.sh$!!'`" - fi ;; - esac - if test -f "${with_tclconfig}/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd "${with_tclconfig}"; pwd)`" - else - AC_MSG_ERROR([${with_tclconfig} directory doesn't contain tclConfig.sh]) - fi - fi - - # then check for a private Tcl installation - if test x"${ac_cv_c_tclconfig}" = x ; then - for i in \ - ../tcl \ - `ls -dr ../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ - `ls -dr ../tcl[[8-9]].[[0-9]] 2>/dev/null` \ - `ls -dr ../tcl[[8-9]].[[0-9]]* 2>/dev/null` \ - ../../tcl \ - `ls -dr ../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ - `ls -dr ../../tcl[[8-9]].[[0-9]] 2>/dev/null` \ - `ls -dr ../../tcl[[8-9]].[[0-9]]* 2>/dev/null` \ - ../../../tcl \ - `ls -dr ../../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ - `ls -dr ../../../tcl[[8-9]].[[0-9]] 2>/dev/null` \ - `ls -dr ../../../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do - if test "${TEA_PLATFORM}" = "windows" \ - -a -f "$i/win/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd $i/win; pwd)`" - break - fi - if test -f "$i/unix/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd $i/unix; pwd)`" - break - fi - done - fi - - # on Darwin, check in Framework installation locations - if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tclconfig}" = x ; then - for i in `ls -d ~/Library/Frameworks 2>/dev/null` \ - `ls -d /Library/Frameworks 2>/dev/null` \ - `ls -d /Network/Library/Frameworks 2>/dev/null` \ - `ls -d /System/Library/Frameworks 2>/dev/null` \ - `ls -d /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/Library/Frameworks/Tcl.framework 2>/dev/null` \ - `ls -d /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/Network/Library/Frameworks/Tcl.framework 2>/dev/null` \ - `ls -d /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/System/Library/Frameworks/Tcl.framework 2>/dev/null` \ - ; do - if test -f "$i/Tcl.framework/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd $i/Tcl.framework; pwd)`" - break - fi - done - fi - - # TEA specific: on Windows, check in common installation locations - if test "${TEA_PLATFORM}" = "windows" \ - -a x"${ac_cv_c_tclconfig}" = x ; then - for i in `ls -d C:/Tcl/lib 2>/dev/null` \ - `ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \ - ; do - if test -f "$i/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd $i; pwd)`" - break - fi - done - fi - - # check in a few common install locations - if test x"${ac_cv_c_tclconfig}" = x ; then - for i in `ls -d ${libdir} 2>/dev/null` \ - `ls -d ${exec_prefix}/lib 2>/dev/null` \ - `ls -d ${prefix}/lib 2>/dev/null` \ - `ls -d /usr/local/lib 2>/dev/null` \ - `ls -d /usr/contrib/lib 2>/dev/null` \ - `ls -d /usr/pkg/lib 2>/dev/null` \ - `ls -d /usr/lib 2>/dev/null` \ - `ls -d /usr/lib64 2>/dev/null` \ - `ls -d /usr/lib/tcl8.6 2>/dev/null` \ - `ls -d /usr/lib/tcl8.5 2>/dev/null` \ - `ls -d /usr/local/lib/tcl8.6 2>/dev/null` \ - `ls -d /usr/local/lib/tcl8.5 2>/dev/null` \ - `ls -d /usr/local/lib/tcl/tcl8.6 2>/dev/null` \ - `ls -d /usr/local/lib/tcl/tcl8.5 2>/dev/null` \ - ; do - if test -f "$i/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd $i; pwd)`" - break - fi - done - fi - - # check in a few other private locations - if test x"${ac_cv_c_tclconfig}" = x ; then - for i in \ - ${srcdir}/../tcl \ - `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ - `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]] 2>/dev/null` \ - `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do - if test "${TEA_PLATFORM}" = "windows" \ - -a -f "$i/win/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd $i/win; pwd)`" - break - fi - if test -f "$i/unix/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd $i/unix; pwd)`" - break - fi - done - fi - ]) - - if test x"${ac_cv_c_tclconfig}" = x ; then - TCL_BIN_DIR="# no Tcl configs found" - AC_MSG_ERROR([Can't find Tcl configuration definitions. Use --with-tcl to specify a directory containing tclConfig.sh]) - else - no_tcl= - TCL_BIN_DIR="${ac_cv_c_tclconfig}" - AC_MSG_RESULT([found ${TCL_BIN_DIR}/tclConfig.sh]) - fi - fi -]) - -#------------------------------------------------------------------------ -# TEA_PATH_TKCONFIG -- -# -# Locate the tkConfig.sh file -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --with-tk=... -# -# Defines the following vars: -# TK_BIN_DIR Full path to the directory containing -# the tkConfig.sh file -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_PATH_TKCONFIG], [ - # - # Ok, lets find the tk configuration - # First, look for one uninstalled. - # the alternative search directory is invoked by --with-tk - # - - if test x"${no_tk}" = x ; then - # we reset no_tk in case something fails here - no_tk=true - AC_ARG_WITH(tk, - AC_HELP_STRING([--with-tk], - [directory containing tk configuration (tkConfig.sh)]), - with_tkconfig="${withval}") - AC_MSG_CHECKING([for Tk configuration]) - AC_CACHE_VAL(ac_cv_c_tkconfig,[ - - # First check to see if --with-tkconfig was specified. - if test x"${with_tkconfig}" != x ; then - case "${with_tkconfig}" in - */tkConfig.sh ) - if test -f "${with_tkconfig}"; then - AC_MSG_WARN([--with-tk argument should refer to directory containing tkConfig.sh, not to tkConfig.sh itself]) - with_tkconfig="`echo "${with_tkconfig}" | sed 's!/tkConfig\.sh$!!'`" - fi ;; - esac - if test -f "${with_tkconfig}/tkConfig.sh" ; then - ac_cv_c_tkconfig="`(cd "${with_tkconfig}"; pwd)`" - else - AC_MSG_ERROR([${with_tkconfig} directory doesn't contain tkConfig.sh]) - fi - fi - - # then check for a private Tk library - if test x"${ac_cv_c_tkconfig}" = x ; then - for i in \ - ../tk \ - `ls -dr ../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ - `ls -dr ../tk[[8-9]].[[0-9]] 2>/dev/null` \ - `ls -dr ../tk[[8-9]].[[0-9]]* 2>/dev/null` \ - ../../tk \ - `ls -dr ../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ - `ls -dr ../../tk[[8-9]].[[0-9]] 2>/dev/null` \ - `ls -dr ../../tk[[8-9]].[[0-9]]* 2>/dev/null` \ - ../../../tk \ - `ls -dr ../../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ - `ls -dr ../../../tk[[8-9]].[[0-9]] 2>/dev/null` \ - `ls -dr ../../../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do - if test "${TEA_PLATFORM}" = "windows" \ - -a -f "$i/win/tkConfig.sh" ; then - ac_cv_c_tkconfig="`(cd $i/win; pwd)`" - break - fi - if test -f "$i/unix/tkConfig.sh" ; then - ac_cv_c_tkconfig="`(cd $i/unix; pwd)`" - break - fi - done - fi - - # on Darwin, check in Framework installation locations - if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tkconfig}" = x ; then - for i in `ls -d ~/Library/Frameworks 2>/dev/null` \ - `ls -d /Library/Frameworks 2>/dev/null` \ - `ls -d /Network/Library/Frameworks 2>/dev/null` \ - `ls -d /System/Library/Frameworks 2>/dev/null` \ - `ls -d /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/Library/Frameworks/Tcl.framework 2>/dev/null` \ - `ls -d /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/Network/Library/Frameworks/Tcl.framework 2>/dev/null` \ - `ls -d /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/System/Library/Frameworks/Tcl.framework 2>/dev/null` \ - ; do - if test -f "$i/Tk.framework/tkConfig.sh" ; then - ac_cv_c_tkconfig="`(cd $i/Tk.framework; pwd)`" - break - fi - done - fi - - # check in a few common install locations - if test x"${ac_cv_c_tkconfig}" = x ; then - for i in `ls -d ${libdir} 2>/dev/null` \ - `ls -d ${exec_prefix}/lib 2>/dev/null` \ - `ls -d ${prefix}/lib 2>/dev/null` \ - `ls -d /usr/local/lib 2>/dev/null` \ - `ls -d /usr/contrib/lib 2>/dev/null` \ - `ls -d /usr/pkg/lib 2>/dev/null` \ - `ls -d /usr/lib 2>/dev/null` \ - `ls -d /usr/lib64 2>/dev/null` \ - `ls -d /usr/lib/tk8.6 2>/dev/null` \ - `ls -d /usr/lib/tk8.5 2>/dev/null` \ - `ls -d /usr/local/lib/tk8.6 2>/dev/null` \ - `ls -d /usr/local/lib/tk8.5 2>/dev/null` \ - `ls -d /usr/local/lib/tcl/tk8.6 2>/dev/null` \ - `ls -d /usr/local/lib/tcl/tk8.5 2>/dev/null` \ - ; do - if test -f "$i/tkConfig.sh" ; then - ac_cv_c_tkconfig="`(cd $i; pwd)`" - break - fi - done - fi - - # TEA specific: on Windows, check in common installation locations - if test "${TEA_PLATFORM}" = "windows" \ - -a x"${ac_cv_c_tkconfig}" = x ; then - for i in `ls -d C:/Tcl/lib 2>/dev/null` \ - `ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \ - ; do - if test -f "$i/tkConfig.sh" ; then - ac_cv_c_tkconfig="`(cd $i; pwd)`" - break - fi - done - fi - - # check in a few other private locations - if test x"${ac_cv_c_tkconfig}" = x ; then - for i in \ - ${srcdir}/../tk \ - `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ - `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]] 2>/dev/null` \ - `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do - if test "${TEA_PLATFORM}" = "windows" \ - -a -f "$i/win/tkConfig.sh" ; then - ac_cv_c_tkconfig="`(cd $i/win; pwd)`" - break - fi - if test -f "$i/unix/tkConfig.sh" ; then - ac_cv_c_tkconfig="`(cd $i/unix; pwd)`" - break - fi - done - fi - ]) - - if test x"${ac_cv_c_tkconfig}" = x ; then - TK_BIN_DIR="# no Tk configs found" - AC_MSG_ERROR([Can't find Tk configuration definitions. Use --with-tk to specify a directory containing tkConfig.sh]) - else - no_tk= - TK_BIN_DIR="${ac_cv_c_tkconfig}" - AC_MSG_RESULT([found ${TK_BIN_DIR}/tkConfig.sh]) - fi - fi -]) - -#------------------------------------------------------------------------ -# TEA_LOAD_TCLCONFIG -- -# -# Load the tclConfig.sh file -# -# Arguments: -# -# Requires the following vars to be set: -# TCL_BIN_DIR -# -# Results: -# -# Substitutes the following vars: -# TCL_BIN_DIR -# TCL_SRC_DIR -# TCL_LIB_FILE -# TCL_ZIP_FILE -# TCL_ZIPFS_SUPPORT -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_LOAD_TCLCONFIG], [ - AC_MSG_CHECKING([for existence of ${TCL_BIN_DIR}/tclConfig.sh]) - - if test -f "${TCL_BIN_DIR}/tclConfig.sh" ; then - AC_MSG_RESULT([loading]) - . "${TCL_BIN_DIR}/tclConfig.sh" - else - AC_MSG_RESULT([could not find ${TCL_BIN_DIR}/tclConfig.sh]) - fi - - # eval is required to do the TCL_DBGX substitution - eval "TCL_LIB_FILE=\"${TCL_LIB_FILE}\"" - eval "TCL_STUB_LIB_FILE=\"${TCL_STUB_LIB_FILE}\"" - - # If the TCL_BIN_DIR is the build directory (not the install directory), - # then set the common variable name to the value of the build variables. - # For example, the variable TCL_LIB_SPEC will be set to the value - # of TCL_BUILD_LIB_SPEC. An extension should make use of TCL_LIB_SPEC - # instead of TCL_BUILD_LIB_SPEC since it will work with both an - # installed and uninstalled version of Tcl. - if test -f "${TCL_BIN_DIR}/Makefile" ; then - TCL_LIB_SPEC="${TCL_BUILD_LIB_SPEC}" - TCL_STUB_LIB_SPEC="${TCL_BUILD_STUB_LIB_SPEC}" - TCL_STUB_LIB_PATH="${TCL_BUILD_STUB_LIB_PATH}" - elif test "`uname -s`" = "Darwin"; then - # If Tcl was built as a framework, attempt to use the libraries - # from the framework at the given location so that linking works - # against Tcl.framework installed in an arbitrary location. - case ${TCL_DEFS} in - *TCL_FRAMEWORK*) - if test -f "${TCL_BIN_DIR}/${TCL_LIB_FILE}"; then - for i in "`cd "${TCL_BIN_DIR}"; pwd`" \ - "`cd "${TCL_BIN_DIR}"/../..; pwd`"; do - if test "`basename "$i"`" = "${TCL_LIB_FILE}.framework"; then - TCL_LIB_SPEC="-F`dirname "$i" | sed -e 's/ /\\\\ /g'` -framework ${TCL_LIB_FILE}" - break - fi - done - fi - if test -f "${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}"; then - TCL_STUB_LIB_SPEC="-L`echo "${TCL_BIN_DIR}" | sed -e 's/ /\\\\ /g'` ${TCL_STUB_LIB_FLAG}" - TCL_STUB_LIB_PATH="${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}" - fi - ;; - esac - fi - - # eval is required to do the TCL_DBGX substitution - eval "TCL_LIB_FLAG=\"${TCL_LIB_FLAG}\"" - eval "TCL_LIB_SPEC=\"${TCL_LIB_SPEC}\"" - eval "TCL_STUB_LIB_FLAG=\"${TCL_STUB_LIB_FLAG}\"" - eval "TCL_STUB_LIB_SPEC=\"${TCL_STUB_LIB_SPEC}\"" - - AC_SUBST(TCL_VERSION) - AC_SUBST(TCL_PATCH_LEVEL) - AC_SUBST(TCL_BIN_DIR) - AC_SUBST(TCL_SRC_DIR) - - AC_SUBST(TCL_LIB_FILE) - AC_SUBST(TCL_LIB_FLAG) - AC_SUBST(TCL_LIB_SPEC) - - AC_SUBST(TCL_STUB_LIB_FILE) - AC_SUBST(TCL_STUB_LIB_FLAG) - AC_SUBST(TCL_STUB_LIB_SPEC) - - AC_MSG_CHECKING([platform]) - hold_cc=$CC; CC="$TCL_CC" - AC_TRY_COMPILE(,[ - #ifdef _WIN32 - #error win32 - #endif - ], [ - TEA_PLATFORM="unix" - CYGPATH=echo - ], [ - TEA_PLATFORM="windows" - AC_CHECK_PROG(CYGPATH, cygpath, cygpath -m, echo) ] - ) - CC=$hold_cc - AC_MSG_RESULT($TEA_PLATFORM) - - # The BUILD_$pkg is to define the correct extern storage class - # handling when making this package - AC_DEFINE_UNQUOTED(BUILD_${PACKAGE_NAME}, [], - [Building extension source?]) - # Do this here as we have fully defined TEA_PLATFORM now - if test "${TEA_PLATFORM}" = "windows" ; then - EXEEXT=".exe" - CLEANFILES="$CLEANFILES *.lib *.dll *.pdb *.exp" - fi - - # TEA specific: - AC_SUBST(CLEANFILES) - AC_SUBST(TCL_LIBS) - AC_SUBST(TCL_DEFS) - AC_SUBST(TCL_EXTRA_CFLAGS) - AC_SUBST(TCL_LD_FLAGS) - AC_SUBST(TCL_SHLIB_LD_LIBS) -]) - -#------------------------------------------------------------------------ -# TEA_LOAD_TKCONFIG -- -# -# Load the tkConfig.sh file -# -# Arguments: -# -# Requires the following vars to be set: -# TK_BIN_DIR -# -# Results: -# -# Sets the following vars that should be in tkConfig.sh: -# TK_BIN_DIR -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_LOAD_TKCONFIG], [ - AC_MSG_CHECKING([for existence of ${TK_BIN_DIR}/tkConfig.sh]) - - if test -f "${TK_BIN_DIR}/tkConfig.sh" ; then - AC_MSG_RESULT([loading]) - . "${TK_BIN_DIR}/tkConfig.sh" - else - AC_MSG_RESULT([could not find ${TK_BIN_DIR}/tkConfig.sh]) - fi - - # eval is required to do the TK_DBGX substitution - eval "TK_LIB_FILE=\"${TK_LIB_FILE}\"" - eval "TK_STUB_LIB_FILE=\"${TK_STUB_LIB_FILE}\"" - - # If the TK_BIN_DIR is the build directory (not the install directory), - # then set the common variable name to the value of the build variables. - # For example, the variable TK_LIB_SPEC will be set to the value - # of TK_BUILD_LIB_SPEC. An extension should make use of TK_LIB_SPEC - # instead of TK_BUILD_LIB_SPEC since it will work with both an - # installed and uninstalled version of Tcl. - if test -f "${TK_BIN_DIR}/Makefile" ; then - TK_LIB_SPEC="${TK_BUILD_LIB_SPEC}" - TK_STUB_LIB_SPEC="${TK_BUILD_STUB_LIB_SPEC}" - TK_STUB_LIB_PATH="${TK_BUILD_STUB_LIB_PATH}" - elif test "`uname -s`" = "Darwin"; then - # If Tk was built as a framework, attempt to use the libraries - # from the framework at the given location so that linking works - # against Tk.framework installed in an arbitrary location. - case ${TK_DEFS} in - *TK_FRAMEWORK*) - if test -f "${TK_BIN_DIR}/${TK_LIB_FILE}"; then - for i in "`cd "${TK_BIN_DIR}"; pwd`" \ - "`cd "${TK_BIN_DIR}"/../..; pwd`"; do - if test "`basename "$i"`" = "${TK_LIB_FILE}.framework"; then - TK_LIB_SPEC="-F`dirname "$i" | sed -e 's/ /\\\\ /g'` -framework ${TK_LIB_FILE}" - break - fi - done - fi - if test -f "${TK_BIN_DIR}/${TK_STUB_LIB_FILE}"; then - TK_STUB_LIB_SPEC="-L` echo "${TK_BIN_DIR}" | sed -e 's/ /\\\\ /g'` ${TK_STUB_LIB_FLAG}" - TK_STUB_LIB_PATH="${TK_BIN_DIR}/${TK_STUB_LIB_FILE}" - fi - ;; - esac - fi - - # eval is required to do the TK_DBGX substitution - eval "TK_LIB_FLAG=\"${TK_LIB_FLAG}\"" - eval "TK_LIB_SPEC=\"${TK_LIB_SPEC}\"" - eval "TK_STUB_LIB_FLAG=\"${TK_STUB_LIB_FLAG}\"" - eval "TK_STUB_LIB_SPEC=\"${TK_STUB_LIB_SPEC}\"" - - # TEA specific: Ensure windowingsystem is defined - if test "${TEA_PLATFORM}" = "unix" ; then - case ${TK_DEFS} in - *MAC_OSX_TK*) - AC_DEFINE(MAC_OSX_TK, 1, [Are we building against Mac OS X TkAqua?]) - TEA_WINDOWINGSYSTEM="aqua" - ;; - *) - TEA_WINDOWINGSYSTEM="x11" - ;; - esac - elif test "${TEA_PLATFORM}" = "windows" ; then - TEA_WINDOWINGSYSTEM="win32" - fi - - AC_SUBST(TK_VERSION) - AC_SUBST(TK_BIN_DIR) - AC_SUBST(TK_SRC_DIR) - - AC_SUBST(TK_LIB_FILE) - AC_SUBST(TK_LIB_FLAG) - AC_SUBST(TK_LIB_SPEC) - - AC_SUBST(TK_STUB_LIB_FILE) - AC_SUBST(TK_STUB_LIB_FLAG) - AC_SUBST(TK_STUB_LIB_SPEC) - - # TEA specific: - AC_SUBST(TK_LIBS) - AC_SUBST(TK_XINCLUDES) -]) - -#------------------------------------------------------------------------ -# TEA_PROG_TCLSH -# Determine the fully qualified path name of the tclsh executable -# in the Tcl build directory or the tclsh installed in a bin -# directory. This macro will correctly determine the name -# of the tclsh executable even if tclsh has not yet been -# built in the build directory. The tclsh found is always -# associated with a tclConfig.sh file. This tclsh should be used -# only for running extension test cases. It should never be -# or generation of files (like pkgIndex.tcl) at build time. -# -# Arguments: -# none -# -# Results: -# Substitutes the following vars: -# TCLSH_PROG -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_PROG_TCLSH], [ - AC_MSG_CHECKING([for tclsh]) - if test -f "${TCL_BIN_DIR}/Makefile" ; then - # tclConfig.sh is in Tcl build directory - if test "${TEA_PLATFORM}" = "windows"; then - if test -f "${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}" ; then - TCLSH_PROG="${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}" - elif test -f "${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}s${EXEEXT}" ; then - TCLSH_PROG="${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}s${EXEEXT}" - elif test -f "${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}t${EXEEXT}" ; then - TCLSH_PROG="${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}t${EXEEXT}" - elif test -f "${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}st${EXEEXT}" ; then - TCLSH_PROG="${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}st${EXEEXT}" - fi - else - TCLSH_PROG="${TCL_BIN_DIR}/tclsh" - fi - else - # tclConfig.sh is in install location - if test "${TEA_PLATFORM}" = "windows"; then - TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}" - else - TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}.${TCL_MINOR_VERSION}${TCL_DBGX}" - fi - list="`ls -d ${TCL_BIN_DIR}/../bin 2>/dev/null` \ - `ls -d ${TCL_BIN_DIR}/.. 2>/dev/null` \ - `ls -d ${TCL_PREFIX}/bin 2>/dev/null`" - for i in $list ; do - if test -f "$i/${TCLSH_PROG}" ; then - REAL_TCL_BIN_DIR="`cd "$i"; pwd`/" - break - fi - done - TCLSH_PROG="${REAL_TCL_BIN_DIR}${TCLSH_PROG}" - fi - AC_MSG_RESULT([${TCLSH_PROG}]) - AC_SUBST(TCLSH_PROG) -]) - -#------------------------------------------------------------------------ -# TEA_PROG_WISH -# Determine the fully qualified path name of the wish executable -# in the Tk build directory or the wish installed in a bin -# directory. This macro will correctly determine the name -# of the wish executable even if wish has not yet been -# built in the build directory. The wish found is always -# associated with a tkConfig.sh file. This wish should be used -# only for running extension test cases. It should never be -# or generation of files (like pkgIndex.tcl) at build time. -# -# Arguments: -# none -# -# Results: -# Substitutes the following vars: -# WISH_PROG -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_PROG_WISH], [ - AC_MSG_CHECKING([for wish]) - if test -f "${TK_BIN_DIR}/Makefile" ; then - # tkConfig.sh is in Tk build directory - if test "${TEA_PLATFORM}" = "windows"; then - if test -f "${TK_BIN_DIR}/wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}${EXEEXT}" ; then - WISH_PROG="${TK_BIN_DIR}/wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}${EXEEXT}" - elif test -f "${TK_BIN_DIR}/wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}s${EXEEXT}" ; then - WISH_PROG="${TK_BIN_DIR}/wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}$s{EXEEXT}" - elif test -f "${TK_BIN_DIR}/wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}t${EXEEXT}" ; then - WISH_PROG="${TK_BIN_DIR}/wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}t${EXEEXT}" - elif test -f "${TK_BIN_DIR}/wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}st${EXEEXT}" ; then - WISH_PROG="${TK_BIN_DIR}/wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}st${EXEEXT}" - fi - else - WISH_PROG="${TK_BIN_DIR}/wish" - fi - else - # tkConfig.sh is in install location - if test "${TEA_PLATFORM}" = "windows"; then - WISH_PROG="wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}${EXEEXT}" - else - WISH_PROG="wish${TK_MAJOR_VERSION}.${TK_MINOR_VERSION}${TK_DBGX}" - fi - list="`ls -d ${TK_BIN_DIR}/../bin 2>/dev/null` \ - `ls -d ${TK_BIN_DIR}/.. 2>/dev/null` \ - `ls -d ${TK_PREFIX}/bin 2>/dev/null`" - for i in $list ; do - if test -f "$i/${WISH_PROG}" ; then - REAL_TK_BIN_DIR="`cd "$i"; pwd`/" - break - fi - done - WISH_PROG="${REAL_TK_BIN_DIR}${WISH_PROG}" - fi - AC_MSG_RESULT([${WISH_PROG}]) - AC_SUBST(WISH_PROG) -]) - -#------------------------------------------------------------------------ -# TEA_ENABLE_SHARED -- -# -# Allows the building of shared libraries -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --enable-shared=yes|no -# --enable-stubs=yes|no -# -# Defines the following vars: -# STATIC_BUILD Used for building import/export libraries -# on Windows. -# -# Sets the following vars: -# SHARED_BUILD Value of 1 or 0 -# STUBS_BUILD Value if 1 or 0 -# USE_TCL_STUBS Value true: if SHARED_BUILD or --enable-stubs -# USE_TCLOO_STUBS Value true: if SHARED_BUILD or --enable-stubs -# USE_TK_STUBS Value true: if SHARED_BUILD or --enable-stubs -# AND TEA_WINDOWING_SYSTEM != "" -#------------------------------------------------------------------------ -AC_DEFUN([TEA_ENABLE_SHARED], [ - AC_MSG_CHECKING([how to build libraries]) - AC_ARG_ENABLE(shared, - AC_HELP_STRING([--enable-shared], - [build and link with shared libraries (default: on)]), - [shared_ok=$enableval], [shared_ok=yes]) - - if test "${enable_shared+set}" = set; then - enableval="$enable_shared" - shared_ok=$enableval - else - shared_ok=yes - fi - - AC_ARG_ENABLE(stubs, - AC_HELP_STRING([--enable-stubs], - [build and link with stub libraries. Always true for shared builds (default: on)]), - [stubs_ok=$enableval], [stubs_ok=yes]) - - if test "${enable_stubs+set}" = set; then - enableval="$enable_stubs" - stubs_ok=$enableval - else - stubs_ok=yes - fi - - # Stubs are always enabled for shared builds - if test "$shared_ok" = "yes" ; then - AC_MSG_RESULT([shared]) - SHARED_BUILD=1 - STUBS_BUILD=1 - else - AC_MSG_RESULT([static]) - SHARED_BUILD=0 - AC_DEFINE(STATIC_BUILD, 1, [This a static build]) - if test "$stubs_ok" = "yes" ; then - STUBS_BUILD=1 - else - STUBS_BUILD=0 - fi - fi - if test "${STUBS_BUILD}" = "1" ; then - AC_DEFINE(USE_TCL_STUBS, 1, [Use Tcl stubs]) - AC_DEFINE(USE_TCLOO_STUBS, 1, [Use TclOO stubs]) - if test "${TEA_WINDOWINGSYSTEM}" != ""; then - AC_DEFINE(USE_TK_STUBS, 1, [Use Tk stubs]) - fi - fi - - AC_SUBST(SHARED_BUILD) - AC_SUBST(STUBS_BUILD) -]) - -#------------------------------------------------------------------------ -# TEA_ENABLE_THREADS -- -# -# Specify if thread support should be enabled. If "yes" is specified -# as an arg (optional), threads are enabled by default, "no" means -# threads are disabled. "yes" is the default. -# -# TCL_THREADS is checked so that if you are compiling an extension -# against a threaded core, your extension must be compiled threaded -# as well. -# -# Note that it is legal to have a thread enabled extension run in a -# threaded or non-threaded Tcl core, but a non-threaded extension may -# only run in a non-threaded Tcl core. -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --enable-threads -# -# Sets the following vars: -# THREADS_LIBS Thread library(s) -# -# Defines the following vars: -# TCL_THREADS -# _REENTRANT -# _THREAD_SAFE -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_ENABLE_THREADS], [ - AC_ARG_ENABLE(threads, - AC_HELP_STRING([--enable-threads], - [build with threads (default: on)]), - [tcl_ok=$enableval], [tcl_ok=yes]) - - if test "${enable_threads+set}" = set; then - enableval="$enable_threads" - tcl_ok=$enableval - else - tcl_ok=yes - fi - - if test "$tcl_ok" = "yes" -o "${TCL_THREADS}" = 1; then - TCL_THREADS=1 - - if test "${TEA_PLATFORM}" != "windows" ; then - # We are always OK on Windows, so check what this platform wants: - - # USE_THREAD_ALLOC tells us to try the special thread-based - # allocator that significantly reduces lock contention - AC_DEFINE(USE_THREAD_ALLOC, 1, - [Do we want to use the threaded memory allocator?]) - AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?]) - if test "`uname -s`" = "SunOS" ; then - AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1, - [Do we really want to follow the standard? Yes we do!]) - fi - AC_DEFINE(_THREAD_SAFE, 1, [Do we want the thread-safe OS API?]) - AC_CHECK_LIB(pthread,pthread_mutex_init,tcl_ok=yes,tcl_ok=no) - if test "$tcl_ok" = "no"; then - # Check a little harder for __pthread_mutex_init in the same - # library, as some systems hide it there until pthread.h is - # defined. We could alternatively do an AC_TRY_COMPILE with - # pthread.h, but that will work with libpthread really doesn't - # exist, like AIX 4.2. [Bug: 4359] - AC_CHECK_LIB(pthread, __pthread_mutex_init, - tcl_ok=yes, tcl_ok=no) - fi - - if test "$tcl_ok" = "yes"; then - # The space is needed - THREADS_LIBS=" -lpthread" - else - AC_CHECK_LIB(pthreads, pthread_mutex_init, - tcl_ok=yes, tcl_ok=no) - if test "$tcl_ok" = "yes"; then - # The space is needed - THREADS_LIBS=" -lpthreads" - else - AC_CHECK_LIB(c, pthread_mutex_init, - tcl_ok=yes, tcl_ok=no) - if test "$tcl_ok" = "no"; then - AC_CHECK_LIB(c_r, pthread_mutex_init, - tcl_ok=yes, tcl_ok=no) - if test "$tcl_ok" = "yes"; then - # The space is needed - THREADS_LIBS=" -pthread" - else - TCL_THREADS=0 - AC_MSG_WARN([Do not know how to find pthread lib on your system - thread support disabled]) - fi - fi - fi - fi - fi - else - TCL_THREADS=0 - fi - # Do checking message here to not mess up interleaved configure output - AC_MSG_CHECKING([for building with threads]) - if test "${TCL_THREADS}" = 1; then - AC_DEFINE(TCL_THREADS, 1, [Are we building with threads enabled?]) - AC_MSG_RESULT([yes (default)]) - else - AC_MSG_RESULT([no]) - fi - # TCL_THREADS sanity checking. See if our request for building with - # threads is the same as the way Tcl was built. If not, warn the user. - case ${TCL_DEFS} in - *THREADS=1*) - if test "${TCL_THREADS}" = "0"; then - AC_MSG_WARN([ - Building ${PACKAGE_NAME} without threads enabled, but building against Tcl - that IS thread-enabled. It is recommended to use --enable-threads.]) - fi - ;; - esac - AC_SUBST(TCL_THREADS) -]) - -#------------------------------------------------------------------------ -# TEA_ENABLE_SYMBOLS -- -# -# Specify if debugging symbols should be used. -# Memory (TCL_MEM_DEBUG) debugging can also be enabled. -# -# Arguments: -# none -# -# TEA varies from core Tcl in that C|LDFLAGS_DEFAULT receives -# the value of C|LDFLAGS_OPTIMIZE|DEBUG already substituted. -# Requires the following vars to be set in the Makefile: -# CFLAGS_DEFAULT -# LDFLAGS_DEFAULT -# -# Results: -# -# Adds the following arguments to configure: -# --enable-symbols -# -# Defines the following vars: -# CFLAGS_DEFAULT Sets to $(CFLAGS_DEBUG) if true -# Sets to "$(CFLAGS_OPTIMIZE) -DNDEBUG" if false -# LDFLAGS_DEFAULT Sets to $(LDFLAGS_DEBUG) if true -# Sets to $(LDFLAGS_OPTIMIZE) if false -# DBGX Formerly used as debug library extension; -# always blank now. -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_ENABLE_SYMBOLS], [ - dnl TEA specific: Make sure we are initialized - AC_REQUIRE([TEA_CONFIG_CFLAGS]) - AC_MSG_CHECKING([for build with symbols]) - AC_ARG_ENABLE(symbols, - AC_HELP_STRING([--enable-symbols], - [build with debugging symbols (default: off)]), - [tcl_ok=$enableval], [tcl_ok=no]) - DBGX="" - if test "$tcl_ok" = "no"; then - CFLAGS_DEFAULT="${CFLAGS_OPTIMIZE} -DNDEBUG" - LDFLAGS_DEFAULT="${LDFLAGS_OPTIMIZE}" - AC_MSG_RESULT([no]) - else - CFLAGS_DEFAULT="${CFLAGS_DEBUG}" - LDFLAGS_DEFAULT="${LDFLAGS_DEBUG}" - if test "$tcl_ok" = "yes"; then - AC_MSG_RESULT([yes (standard debugging)]) - fi - fi - # TEA specific: - if test "${TEA_PLATFORM}" != "windows" ; then - LDFLAGS_DEFAULT="${LDFLAGS}" - fi - AC_SUBST(CFLAGS_DEFAULT) - AC_SUBST(LDFLAGS_DEFAULT) - AC_SUBST(TCL_DBGX) - - if test "$tcl_ok" = "mem" -o "$tcl_ok" = "all"; then - AC_DEFINE(TCL_MEM_DEBUG, 1, [Is memory debugging enabled?]) - fi - - if test "$tcl_ok" != "yes" -a "$tcl_ok" != "no"; then - if test "$tcl_ok" = "all"; then - AC_MSG_RESULT([enabled symbols mem debugging]) - else - AC_MSG_RESULT([enabled $tcl_ok debugging]) - fi - fi -]) - -#------------------------------------------------------------------------ -# TEA_ENABLE_LANGINFO -- -# -# Allows use of modern nl_langinfo check for better l10n. -# This is only relevant for Unix. -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --enable-langinfo=yes|no (default is yes) -# -# Defines the following vars: -# HAVE_LANGINFO Triggers use of nl_langinfo if defined. -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_ENABLE_LANGINFO], [ - AC_ARG_ENABLE(langinfo, - AC_HELP_STRING([--enable-langinfo], - [use nl_langinfo if possible to determine encoding at startup, otherwise use old heuristic (default: on)]), - [langinfo_ok=$enableval], [langinfo_ok=yes]) - - HAVE_LANGINFO=0 - if test "$langinfo_ok" = "yes"; then - AC_CHECK_HEADER(langinfo.h,[langinfo_ok=yes],[langinfo_ok=no]) - fi - AC_MSG_CHECKING([whether to use nl_langinfo]) - if test "$langinfo_ok" = "yes"; then - AC_CACHE_VAL(tcl_cv_langinfo_h, [ - AC_TRY_COMPILE([#include ], [nl_langinfo(CODESET);], - [tcl_cv_langinfo_h=yes],[tcl_cv_langinfo_h=no])]) - AC_MSG_RESULT([$tcl_cv_langinfo_h]) - if test $tcl_cv_langinfo_h = yes; then - AC_DEFINE(HAVE_LANGINFO, 1, [Do we have nl_langinfo()?]) - fi - else - AC_MSG_RESULT([$langinfo_ok]) - fi -]) - -#-------------------------------------------------------------------- -# TEA_CONFIG_SYSTEM -# -# Determine what the system is (some things cannot be easily checked -# on a feature-driven basis, alas). This can usually be done via the -# "uname" command. -# -# Arguments: -# none -# -# Results: -# Defines the following var: -# -# system - System/platform/version identification code. -#-------------------------------------------------------------------- - -AC_DEFUN([TEA_CONFIG_SYSTEM], [ - AC_CACHE_CHECK([system version], tcl_cv_sys_version, [ - # TEA specific: - if test "${TEA_PLATFORM}" = "windows" ; then - tcl_cv_sys_version=windows - else - tcl_cv_sys_version=`uname -s`-`uname -r` - if test "$?" -ne 0 ; then - AC_MSG_WARN([can't find uname command]) - tcl_cv_sys_version=unknown - else - if test "`uname -s`" = "AIX" ; then - tcl_cv_sys_version=AIX-`uname -v`.`uname -r` - fi - fi - fi - ]) - system=$tcl_cv_sys_version -]) - -#-------------------------------------------------------------------- -# TEA_CONFIG_CFLAGS -# -# Try to determine the proper flags to pass to the compiler -# for building shared libraries and other such nonsense. -# -# Arguments: -# none -# -# Results: -# -# Defines and substitutes the following vars: -# -# DL_OBJS, DL_LIBS - removed for TEA, only needed by core. -# LDFLAGS - Flags to pass to the compiler when linking object -# files into an executable application binary such -# as tclsh. -# LD_SEARCH_FLAGS-Flags to pass to ld, such as "-R /usr/local/tcl/lib", -# that tell the run-time dynamic linker where to look -# for shared libraries such as libtcl.so. Depends on -# the variable LIB_RUNTIME_DIR in the Makefile. Could -# be the same as CC_SEARCH_FLAGS if ${CC} is used to link. -# CC_SEARCH_FLAGS-Flags to pass to ${CC}, such as "-Wl,-rpath,/usr/local/tcl/lib", -# that tell the run-time dynamic linker where to look -# for shared libraries such as libtcl.so. Depends on -# the variable LIB_RUNTIME_DIR in the Makefile. -# SHLIB_CFLAGS - Flags to pass to cc when compiling the components -# of a shared library (may request position-independent -# code, among other things). -# SHLIB_LD - Base command to use for combining object files -# into a shared library. -# SHLIB_LD_LIBS - Dependent libraries for the linker to scan when -# creating shared libraries. This symbol typically -# goes at the end of the "ld" commands that build -# shared libraries. The value of the symbol defaults to -# "${LIBS}" if all of the dependent libraries should -# be specified when creating a shared library. If -# dependent libraries should not be specified (as on -# SunOS 4.x, where they cause the link to fail, or in -# general if Tcl and Tk aren't themselves shared -# libraries), then this symbol has an empty string -# as its value. -# SHLIB_SUFFIX - Suffix to use for the names of dynamically loadable -# extensions. An empty string means we don't know how -# to use shared libraries on this platform. -# LIB_SUFFIX - Specifies everything that comes after the "libfoo" -# in a static or shared library name, using the $PACKAGE_VERSION variable -# to put the version in the right place. This is used -# by platforms that need non-standard library names. -# Examples: ${PACKAGE_VERSION}.so.1.1 on NetBSD, since it needs -# to have a version after the .so, and ${PACKAGE_VERSION}.a -# on AIX, since a shared library needs to have -# a .a extension whereas shared objects for loadable -# extensions have a .so extension. Defaults to -# ${PACKAGE_VERSION}${SHLIB_SUFFIX}. -# CFLAGS_DEBUG - -# Flags used when running the compiler in debug mode -# CFLAGS_OPTIMIZE - -# Flags used when running the compiler in optimize mode -# CFLAGS - Additional CFLAGS added as necessary (usually 64-bit) -#-------------------------------------------------------------------- - -AC_DEFUN([TEA_CONFIG_CFLAGS], [ - dnl TEA specific: Make sure we are initialized - AC_REQUIRE([TEA_INIT]) - - # Step 0.a: Enable 64 bit support? - - AC_MSG_CHECKING([if 64bit support is requested]) - AC_ARG_ENABLE(64bit, - AC_HELP_STRING([--enable-64bit], - [enable 64bit support (default: off)]), - [do64bit=$enableval], [do64bit=no]) - AC_MSG_RESULT([$do64bit]) - - # Step 0.b: Enable Solaris 64 bit VIS support? - - AC_MSG_CHECKING([if 64bit Sparc VIS support is requested]) - AC_ARG_ENABLE(64bit-vis, - AC_HELP_STRING([--enable-64bit-vis], - [enable 64bit Sparc VIS support (default: off)]), - [do64bitVIS=$enableval], [do64bitVIS=no]) - AC_MSG_RESULT([$do64bitVIS]) - # Force 64bit on with VIS - AS_IF([test "$do64bitVIS" = "yes"], [do64bit=yes]) - - # Step 0.c: Check if visibility support is available. Do this here so - # that platform specific alternatives can be used below if this fails. - - AC_CACHE_CHECK([if compiler supports visibility "hidden"], - tcl_cv_cc_visibility_hidden, [ - hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -Werror" - AC_TRY_LINK([ - extern __attribute__((__visibility__("hidden"))) void f(void); - void f(void) {}], [f();], tcl_cv_cc_visibility_hidden=yes, - tcl_cv_cc_visibility_hidden=no) - CFLAGS=$hold_cflags]) - AS_IF([test $tcl_cv_cc_visibility_hidden = yes], [ - AC_DEFINE(MODULE_SCOPE, - [extern __attribute__((__visibility__("hidden")))], - [Compiler support for module scope symbols]) - AC_DEFINE(HAVE_HIDDEN, [1], [Compiler support for module scope symbols]) - ]) - - # Step 0.d: Disable -rpath support? - - AC_MSG_CHECKING([if rpath support is requested]) - AC_ARG_ENABLE(rpath, - AC_HELP_STRING([--disable-rpath], - [disable rpath support (default: on)]), - [doRpath=$enableval], [doRpath=yes]) - AC_MSG_RESULT([$doRpath]) - - # TEA specific: Cross-compiling options for Windows/CE builds? - - AS_IF([test "${TEA_PLATFORM}" = windows], [ - AC_MSG_CHECKING([if Windows/CE build is requested]) - AC_ARG_ENABLE(wince, - AC_HELP_STRING([--enable-wince], - [enable Win/CE support (where applicable)]), - [doWince=$enableval], [doWince=no]) - AC_MSG_RESULT([$doWince]) - ]) - - # Set the variable "system" to hold the name and version number - # for the system. - - TEA_CONFIG_SYSTEM - - # Require ranlib early so we can override it in special cases below. - - AC_REQUIRE([AC_PROG_RANLIB]) - - # Set configuration options based on system name and version. - # This is similar to Tcl's unix/tcl.m4 except that we've added a - # "windows" case and removed some core-only vars. - - do64bit_ok=no - # default to '{$LIBS}' and set to "" on per-platform necessary basis - SHLIB_LD_LIBS='${LIBS}' - # When ld needs options to work in 64-bit mode, put them in - # LDFLAGS_ARCH so they eventually end up in LDFLAGS even if [load] - # is disabled by the user. [Bug 1016796] - LDFLAGS_ARCH="" - UNSHARED_LIB_SUFFIX="" - # TEA specific: use PACKAGE_VERSION instead of VERSION - TCL_TRIM_DOTS='`echo ${PACKAGE_VERSION} | tr -d .`' - ECHO_VERSION='`echo ${PACKAGE_VERSION}`' - TCL_LIB_VERSIONS_OK=ok - CFLAGS_DEBUG=-g - AS_IF([test "$GCC" = yes], [ - CFLAGS_OPTIMIZE=-O2 - CFLAGS_WARNING="-Wall" - ], [ - CFLAGS_OPTIMIZE=-O - CFLAGS_WARNING="" - ]) - AC_CHECK_TOOL(AR, ar) - STLIB_LD='${AR} cr' - LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH" - AS_IF([test "x$SHLIB_VERSION" = x],[SHLIB_VERSION=""],[SHLIB_VERSION=".$SHLIB_VERSION"]) - case $system in - # TEA specific: - windows) - # This is a 2-stage check to make sure we have the 64-bit SDK - # We have to know where the SDK is installed. - # This magic is based on MS Platform SDK for Win2003 SP1 - hobbs - # MACHINE is IX86 for LINK, but this is used by the manifest, - # which requires x86|amd64|ia64. - MACHINE="X86" - if test "$do64bit" != "no" ; then - if test "x${MSSDK}x" = "xx" ; then - MSSDK="C:/Progra~1/Microsoft Platform SDK" - fi - MSSDK=`echo "$MSSDK" | sed -e 's!\\\!/!g'` - PATH64="" - case "$do64bit" in - amd64|x64|yes) - MACHINE="AMD64" ; # default to AMD64 64-bit build - PATH64="${MSSDK}/Bin/Win64/x86/AMD64" - ;; - ia64) - MACHINE="IA64" - PATH64="${MSSDK}/Bin/Win64" - ;; - esac - if test "$GCC" != "yes" -a ! -d "${PATH64}" ; then - AC_MSG_WARN([Could not find 64-bit $MACHINE SDK to enable 64bit mode]) - AC_MSG_WARN([Ensure latest Platform SDK is installed]) - do64bit="no" - else - AC_MSG_RESULT([ Using 64-bit $MACHINE mode]) - do64bit_ok="yes" - fi - fi - - if test "$doWince" != "no" ; then - if test "$do64bit" != "no" ; then - AC_MSG_ERROR([Windows/CE and 64-bit builds incompatible]) - fi - if test "$GCC" = "yes" ; then - AC_MSG_ERROR([Windows/CE and GCC builds incompatible]) - fi - TEA_PATH_CELIB - # Set defaults for common evc4/PPC2003 setup - # Currently Tcl requires 300+, possibly 420+ for sockets - CEVERSION=420; # could be 211 300 301 400 420 ... - TARGETCPU=ARMV4; # could be ARMV4 ARM MIPS SH3 X86 ... - ARCH=ARM; # could be ARM MIPS X86EM ... - PLATFORM="Pocket PC 2003"; # or "Pocket PC 2002" - if test "$doWince" != "yes"; then - # If !yes then the user specified something - # Reset ARCH to allow user to skip specifying it - ARCH= - eval `echo $doWince | awk -F, '{ \ - if (length([$]1)) { printf "CEVERSION=\"%s\"\n", [$]1; \ - if ([$]1 < 400) { printf "PLATFORM=\"Pocket PC 2002\"\n" } }; \ - if (length([$]2)) { printf "TARGETCPU=\"%s\"\n", toupper([$]2) }; \ - if (length([$]3)) { printf "ARCH=\"%s\"\n", toupper([$]3) }; \ - if (length([$]4)) { printf "PLATFORM=\"%s\"\n", [$]4 }; \ - }'` - if test "x${ARCH}" = "x" ; then - ARCH=$TARGETCPU; - fi - fi - OSVERSION=WCE$CEVERSION; - if test "x${WCEROOT}" = "x" ; then - WCEROOT="C:/Program Files/Microsoft eMbedded C++ 4.0" - if test ! -d "${WCEROOT}" ; then - WCEROOT="C:/Program Files/Microsoft eMbedded Tools" - fi - fi - if test "x${SDKROOT}" = "x" ; then - SDKROOT="C:/Program Files/Windows CE Tools" - if test ! -d "${SDKROOT}" ; then - SDKROOT="C:/Windows CE Tools" - fi - fi - WCEROOT=`echo "$WCEROOT" | sed -e 's!\\\!/!g'` - SDKROOT=`echo "$SDKROOT" | sed -e 's!\\\!/!g'` - if test ! -d "${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" \ - -o ! -d "${WCEROOT}/EVC/${OSVERSION}/bin"; then - AC_MSG_ERROR([could not find PocketPC SDK or target compiler to enable WinCE mode [$CEVERSION,$TARGETCPU,$ARCH,$PLATFORM]]) - doWince="no" - else - # We could PATH_NOSPACE these, but that's not important, - # as long as we quote them when used. - CEINCLUDE="${SDKROOT}/${OSVERSION}/${PLATFORM}/include" - if test -d "${CEINCLUDE}/${TARGETCPU}" ; then - CEINCLUDE="${CEINCLUDE}/${TARGETCPU}" - fi - CELIBPATH="${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" - fi - fi - - if test "$GCC" != "yes" ; then - if test "${SHARED_BUILD}" = "0" ; then - runtime=-MT - else - runtime=-MD - fi - case "x`echo \${VisualStudioVersion}`" in - x1[[4-9]]*) - lflags="${lflags} -nodefaultlib:libucrt.lib" - TEA_ADD_LIBS([ucrt.lib]) - ;; - *) - ;; - esac - - if test "$do64bit" != "no" ; then - # All this magic is necessary for the Win64 SDK RC1 - hobbs - CC="\"${PATH64}/cl.exe\"" - CFLAGS="${CFLAGS} -I\"${MSSDK}/Include\" -I\"${MSSDK}/Include/crt\" -I\"${MSSDK}/Include/crt/sys\"" - RC="\"${MSSDK}/bin/rc.exe\"" - lflags="${lflags} -nologo -MACHINE:${MACHINE} -LIBPATH:\"${MSSDK}/Lib/${MACHINE}\"" - LINKBIN="\"${PATH64}/link.exe\"" - CFLAGS_DEBUG="-nologo -Zi -Od -W3 ${runtime}d" - CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}" - # Avoid 'unresolved external symbol __security_cookie' - # errors, c.f. http://support.microsoft.com/?id=894573 - TEA_ADD_LIBS([bufferoverflowU.lib]) - elif test "$doWince" != "no" ; then - CEBINROOT="${WCEROOT}/EVC/${OSVERSION}/bin" - if test "${TARGETCPU}" = "X86"; then - CC="\"${CEBINROOT}/cl.exe\"" - else - CC="\"${CEBINROOT}/cl${ARCH}.exe\"" - fi - CFLAGS="$CFLAGS -I\"${CELIB_DIR}/inc\" -I\"${CEINCLUDE}\"" - RC="\"${WCEROOT}/Common/EVC/bin/rc.exe\"" - arch=`echo ${ARCH} | awk '{print tolower([$]0)}'` - defs="${ARCH} _${ARCH}_ ${arch} PALM_SIZE _MT _WINDOWS" - if test "${SHARED_BUILD}" = "1" ; then - # Static CE builds require static celib as well - defs="${defs} _DLL" - fi - for i in $defs ; do - AC_DEFINE_UNQUOTED($i, 1, [WinCE def ]$i) - done - AC_DEFINE_UNQUOTED(_WIN32_WCE, $CEVERSION, [_WIN32_WCE version]) - AC_DEFINE_UNQUOTED(UNDER_CE, $CEVERSION, [UNDER_CE version]) - CFLAGS_DEBUG="-nologo -Zi -Od" - CFLAGS_OPTIMIZE="-nologo -Ox" - lversion=`echo ${CEVERSION} | sed -e 's/\(.\)\(..\)/\1\.\2/'` - lflags="${lflags} -MACHINE:${ARCH} -LIBPATH:\"${CELIBPATH}\" -subsystem:windowsce,${lversion} -nologo" - LINKBIN="\"${CEBINROOT}/link.exe\"" - AC_SUBST(CELIB_DIR) - else - RC="rc" - lflags="${lflags} -nologo" - LINKBIN="link" - CFLAGS_DEBUG="-nologo -Z7 -Od -W3 -WX ${runtime}d" - CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}" - fi - fi - - if test "$GCC" = "yes"; then - # mingw gcc mode - AC_CHECK_TOOL(RC, windres) - CFLAGS_DEBUG="-g" - CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer" - SHLIB_LD='${CC} -shared' - UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' - LDFLAGS_CONSOLE="-wl,--subsystem,console ${lflags}" - LDFLAGS_WINDOW="-wl,--subsystem,windows ${lflags}" - - AC_CACHE_CHECK(for cross-compile version of gcc, - ac_cv_cross, - AC_TRY_COMPILE([ - #ifdef _WIN32 - #error cross-compiler - #endif - ], [], - ac_cv_cross=yes, - ac_cv_cross=no) - ) - if test "$ac_cv_cross" = "yes"; then - case "$do64bit" in - amd64|x64|yes) - CC="x86_64-w64-mingw32-gcc" - LD="x86_64-w64-mingw32-ld" - AR="x86_64-w64-mingw32-ar" - RANLIB="x86_64-w64-mingw32-ranlib" - RC="x86_64-w64-mingw32-windres" - ;; - *) - CC="i686-w64-mingw32-gcc" - LD="i686-w64-mingw32-ld" - AR="i686-w64-mingw32-ar" - RANLIB="i686-w64-mingw32-ranlib" - RC="i686-w64-mingw32-windres" - ;; - esac - fi - - else - SHLIB_LD="${LINKBIN} -dll ${lflags}" - # link -lib only works when -lib is the first arg - STLIB_LD="${LINKBIN} -lib ${lflags}" - UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.lib' - PATHTYPE=-w - # For information on what debugtype is most useful, see: - # http://msdn.microsoft.com/library/en-us/dnvc60/html/gendepdebug.asp - # and also - # http://msdn2.microsoft.com/en-us/library/y0zzbyt4%28VS.80%29.aspx - # This essentially turns it all on. - LDFLAGS_DEBUG="-debug -debugtype:cv" - LDFLAGS_OPTIMIZE="-release" - if test "$doWince" != "no" ; then - LDFLAGS_CONSOLE="-link ${lflags}" - LDFLAGS_WINDOW=${LDFLAGS_CONSOLE} - else - LDFLAGS_CONSOLE="-link -subsystem:console ${lflags}" - LDFLAGS_WINDOW="-link -subsystem:windows ${lflags}" - fi - fi - - SHLIB_SUFFIX=".dll" - SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.dll' - - TCL_LIB_VERSIONS_OK=nodots - ;; - AIX-*) - AS_IF([test "${TCL_THREADS}" = "1" -a "$GCC" != "yes"], [ - # AIX requires the _r compiler when gcc isn't being used - case "${CC}" in - *_r|*_r\ *) - # ok ... - ;; - *) - # Make sure only first arg gets _r - CC=`echo "$CC" | sed -e 's/^\([[^ ]]*\)/\1_r/'` - ;; - esac - AC_MSG_RESULT([Using $CC for compiling with threads]) - ]) - LIBS="$LIBS -lc" - SHLIB_CFLAGS="" - SHLIB_SUFFIX=".so" - - LD_LIBRARY_PATH_VAR="LIBPATH" - - # Check to enable 64-bit flags for compiler/linker - AS_IF([test "$do64bit" = yes], [ - AS_IF([test "$GCC" = yes], [ - AC_MSG_WARN([64bit mode not supported with GCC on $system]) - ], [ - do64bit_ok=yes - CFLAGS="$CFLAGS -q64" - LDFLAGS_ARCH="-q64" - RANLIB="${RANLIB} -X64" - AR="${AR} -X64" - SHLIB_LD_FLAGS="-b64" - ]) - ]) - - AS_IF([test "`uname -m`" = ia64], [ - # AIX-5 uses ELF style dynamic libraries on IA-64, but not PPC - SHLIB_LD="/usr/ccs/bin/ld -G -z text" - AS_IF([test "$GCC" = yes], [ - CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' - ], [ - CC_SEARCH_FLAGS='-R${LIB_RUNTIME_DIR}' - ]) - LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' - ], [ - AS_IF([test "$GCC" = yes], [ - SHLIB_LD='${CC} -shared -Wl,-bexpall' - ], [ - SHLIB_LD="/bin/ld -bhalt:4 -bM:SRE -bexpall -H512 -T512 -bnoentry" - LDFLAGS="$LDFLAGS -brtl" - ]) - SHLIB_LD="${SHLIB_LD} ${SHLIB_LD_FLAGS}" - CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - ]) - ;; - BeOS*) - SHLIB_CFLAGS="-fPIC" - SHLIB_LD='${CC} -nostart' - SHLIB_SUFFIX=".so" - - #----------------------------------------------------------- - # Check for inet_ntoa in -lbind, for BeOS (which also needs - # -lsocket, even if the network functions are in -lnet which - # is always linked to, for compatibility. - #----------------------------------------------------------- - AC_CHECK_LIB(bind, inet_ntoa, [LIBS="$LIBS -lbind -lsocket"]) - ;; - BSD/OS-4.*) - SHLIB_CFLAGS="-export-dynamic -fPIC" - SHLIB_LD='${CC} -shared' - SHLIB_SUFFIX=".so" - LDFLAGS="$LDFLAGS -export-dynamic" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - ;; - CYGWIN_*) - SHLIB_CFLAGS="" - SHLIB_LD='${CC} -shared' - SHLIB_LD_LIBS="${SHLIB_LD_LIBS} -Wl,--out-implib,\$[@].a" - SHLIB_SUFFIX=".dll" - EXEEXT=".exe" - do64bit_ok=yes - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - ;; - Haiku*) - LDFLAGS="$LDFLAGS -Wl,--export-dynamic" - SHLIB_CFLAGS="-fPIC" - SHLIB_SUFFIX=".so" - SHLIB_LD='${CC} ${CFLAGS} ${LDFLAGS} -shared' - AC_CHECK_LIB(network, inet_ntoa, [LIBS="$LIBS -lnetwork"]) - ;; - HP-UX-*.11.*) - # Use updated header definitions where possible - AC_DEFINE(_XOPEN_SOURCE_EXTENDED, 1, [Do we want to use the XOPEN network library?]) - # TEA specific: Needed by Tcl, but not most extensions - #AC_DEFINE(_XOPEN_SOURCE, 1, [Do we want to use the XOPEN network library?]) - #LIBS="$LIBS -lxnet" # Use the XOPEN network library - - AS_IF([test "`uname -m`" = ia64], [ - SHLIB_SUFFIX=".so" - # Use newer C++ library for C++ extensions - #if test "$GCC" != "yes" ; then - # CPPFLAGS="-AA" - #fi - ], [ - SHLIB_SUFFIX=".sl" - ]) - AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no) - AS_IF([test "$tcl_ok" = yes], [ - LDFLAGS="$LDFLAGS -Wl,-E" - CC_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.' - LD_SEARCH_FLAGS='+s +b ${LIB_RUNTIME_DIR}:.' - LD_LIBRARY_PATH_VAR="SHLIB_PATH" - ]) - AS_IF([test "$GCC" = yes], [ - SHLIB_LD='${CC} -shared' - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - ], [ - CFLAGS="$CFLAGS -z" - # Users may want PA-RISC 1.1/2.0 portable code - needs HP cc - #CFLAGS="$CFLAGS +DAportable" - SHLIB_CFLAGS="+z" - SHLIB_LD="ld -b" - ]) - - # Check to enable 64-bit flags for compiler/linker - AS_IF([test "$do64bit" = "yes"], [ - AS_IF([test "$GCC" = yes], [ - case `${CC} -dumpmachine` in - hppa64*) - # 64-bit gcc in use. Fix flags for GNU ld. - do64bit_ok=yes - SHLIB_LD='${CC} -shared' - AS_IF([test $doRpath = yes], [ - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - ;; - *) - AC_MSG_WARN([64bit mode not supported with GCC on $system]) - ;; - esac - ], [ - do64bit_ok=yes - CFLAGS="$CFLAGS +DD64" - LDFLAGS_ARCH="+DD64" - ]) - ]) ;; - IRIX-6.*) - SHLIB_CFLAGS="" - SHLIB_LD="ld -n32 -shared -rdata_shared" - SHLIB_SUFFIX=".so" - AS_IF([test $doRpath = yes], [ - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}']) - AS_IF([test "$GCC" = yes], [ - CFLAGS="$CFLAGS -mabi=n32" - LDFLAGS="$LDFLAGS -mabi=n32" - ], [ - case $system in - IRIX-6.3) - # Use to build 6.2 compatible binaries on 6.3. - CFLAGS="$CFLAGS -n32 -D_OLD_TERMIOS" - ;; - *) - CFLAGS="$CFLAGS -n32" - ;; - esac - LDFLAGS="$LDFLAGS -n32" - ]) - ;; - IRIX64-6.*) - SHLIB_CFLAGS="" - SHLIB_LD="ld -n32 -shared -rdata_shared" - SHLIB_SUFFIX=".so" - AS_IF([test $doRpath = yes], [ - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}']) - - # Check to enable 64-bit flags for compiler/linker - - AS_IF([test "$do64bit" = yes], [ - AS_IF([test "$GCC" = yes], [ - AC_MSG_WARN([64bit mode not supported by gcc]) - ], [ - do64bit_ok=yes - SHLIB_LD="ld -64 -shared -rdata_shared" - CFLAGS="$CFLAGS -64" - LDFLAGS_ARCH="-64" - ]) - ]) - ;; - Linux*|GNU*|NetBSD-Debian) - SHLIB_CFLAGS="-fPIC" - SHLIB_SUFFIX=".so" - - # TEA specific: - CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer" - - # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS - SHLIB_LD='${CC} ${CFLAGS} ${LDFLAGS_DEFAULT} -shared' - LDFLAGS="$LDFLAGS -Wl,--export-dynamic" - AS_IF([test $doRpath = yes], [ - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - AS_IF([test "`uname -m`" = "alpha"], [CFLAGS="$CFLAGS -mieee"]) - AS_IF([test $do64bit = yes], [ - AC_CACHE_CHECK([if compiler accepts -m64 flag], tcl_cv_cc_m64, [ - hold_cflags=$CFLAGS - CFLAGS="$CFLAGS -m64" - AC_TRY_LINK(,, tcl_cv_cc_m64=yes, tcl_cv_cc_m64=no) - CFLAGS=$hold_cflags]) - AS_IF([test $tcl_cv_cc_m64 = yes], [ - CFLAGS="$CFLAGS -m64" - do64bit_ok=yes - ]) - ]) - - # The combo of gcc + glibc has a bug related to inlining of - # functions like strtod(). The -fno-builtin flag should address - # this problem but it does not work. The -fno-inline flag is kind - # of overkill but it works. Disable inlining only when one of the - # files in compat/*.c is being linked in. - - AS_IF([test x"${USE_COMPAT}" != x],[CFLAGS="$CFLAGS -fno-inline"]) - ;; - Lynx*) - SHLIB_CFLAGS="-fPIC" - SHLIB_SUFFIX=".so" - CFLAGS_OPTIMIZE=-02 - SHLIB_LD='${CC} -shared' - LD_FLAGS="-Wl,--export-dynamic" - AS_IF([test $doRpath = yes], [ - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) - ;; - OpenBSD-*) - arch=`arch -s` - case "$arch" in - alpha|sparc64) - SHLIB_CFLAGS="-fPIC" - ;; - *) - SHLIB_CFLAGS="-fpic" - ;; - esac - SHLIB_LD='${CC} ${SHLIB_CFLAGS} -shared' - SHLIB_SUFFIX=".so" - AS_IF([test $doRpath = yes], [ - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so${SHLIB_VERSION}' - LDFLAGS="-Wl,-export-dynamic" - CFLAGS_OPTIMIZE="-O2" - AS_IF([test "${TCL_THREADS}" = "1"], [ - # On OpenBSD: Compile with -pthread - # Don't link with -lpthread - LIBS=`echo $LIBS | sed s/-lpthread//` - CFLAGS="$CFLAGS -pthread" - ]) - # OpenBSD doesn't do version numbers with dots. - UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' - TCL_LIB_VERSIONS_OK=nodots - ;; - NetBSD-*) - # NetBSD has ELF and can use 'cc -shared' to build shared libs - SHLIB_CFLAGS="-fPIC" - SHLIB_LD='${CC} ${SHLIB_CFLAGS} -shared' - SHLIB_SUFFIX=".so" - LDFLAGS="$LDFLAGS -export-dynamic" - AS_IF([test $doRpath = yes], [ - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - AS_IF([test "${TCL_THREADS}" = "1"], [ - # The -pthread needs to go in the CFLAGS, not LIBS - LIBS=`echo $LIBS | sed s/-pthread//` - CFLAGS="$CFLAGS -pthread" - LDFLAGS="$LDFLAGS -pthread" - ]) - ;; - DragonFly-*|FreeBSD-*) - # This configuration from FreeBSD Ports. - SHLIB_CFLAGS="-fPIC" - SHLIB_LD="${CC} -shared" - SHLIB_LD_LIBS="${SHLIB_LD_LIBS} -Wl,-soname,\$[@]" - SHLIB_SUFFIX=".so" - LDFLAGS="" - AS_IF([test $doRpath = yes], [ - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) - AS_IF([test "${TCL_THREADS}" = "1"], [ - # The -pthread needs to go in the LDFLAGS, not LIBS - LIBS=`echo $LIBS | sed s/-pthread//` - CFLAGS="$CFLAGS $PTHREAD_CFLAGS" - LDFLAGS="$LDFLAGS $PTHREAD_LIBS"]) - case $system in - FreeBSD-3.*) - # Version numbers are dot-stripped by system policy. - TCL_TRIM_DOTS=`echo ${PACKAGE_VERSION} | tr -d .` - UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' - SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1' - TCL_LIB_VERSIONS_OK=nodots - ;; - esac - ;; - Darwin-*) - CFLAGS_OPTIMIZE="-Os" - SHLIB_CFLAGS="-fno-common" - # To avoid discrepancies between what headers configure sees during - # preprocessing tests and compiling tests, move any -isysroot and - # -mmacosx-version-min flags from CFLAGS to CPPFLAGS: - CPPFLAGS="${CPPFLAGS} `echo " ${CFLAGS}" | \ - awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \ - if ([$]i~/^(isysroot|mmacosx-version-min)/) print "-"[$]i}'`" - CFLAGS="`echo " ${CFLAGS}" | \ - awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \ - if (!([$]i~/^(isysroot|mmacosx-version-min)/)) print "-"[$]i}'`" - AS_IF([test $do64bit = yes], [ - case `arch` in - ppc) - AC_CACHE_CHECK([if compiler accepts -arch ppc64 flag], - tcl_cv_cc_arch_ppc64, [ - hold_cflags=$CFLAGS - CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5" - AC_TRY_LINK(,, tcl_cv_cc_arch_ppc64=yes, - tcl_cv_cc_arch_ppc64=no) - CFLAGS=$hold_cflags]) - AS_IF([test $tcl_cv_cc_arch_ppc64 = yes], [ - CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5" - do64bit_ok=yes - ]);; - i386) - AC_CACHE_CHECK([if compiler accepts -arch x86_64 flag], - tcl_cv_cc_arch_x86_64, [ - hold_cflags=$CFLAGS - CFLAGS="$CFLAGS -arch x86_64" - AC_TRY_LINK(,, tcl_cv_cc_arch_x86_64=yes, - tcl_cv_cc_arch_x86_64=no) - CFLAGS=$hold_cflags]) - AS_IF([test $tcl_cv_cc_arch_x86_64 = yes], [ - CFLAGS="$CFLAGS -arch x86_64" - do64bit_ok=yes - ]);; - *) - AC_MSG_WARN([Don't know how enable 64-bit on architecture `arch`]);; - esac - ], [ - # Check for combined 32-bit and 64-bit fat build - AS_IF([echo "$CFLAGS " |grep -E -q -- '-arch (ppc64|x86_64) ' \ - && echo "$CFLAGS " |grep -E -q -- '-arch (ppc|i386) '], [ - fat_32_64=yes]) - ]) - # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS - SHLIB_LD='${CC} -dynamiclib ${CFLAGS} ${LDFLAGS_DEFAULT}' - AC_CACHE_CHECK([if ld accepts -single_module flag], tcl_cv_ld_single_module, [ - hold_ldflags=$LDFLAGS - LDFLAGS="$LDFLAGS -dynamiclib -Wl,-single_module" - AC_TRY_LINK(, [int i;], tcl_cv_ld_single_module=yes, tcl_cv_ld_single_module=no) - LDFLAGS=$hold_ldflags]) - AS_IF([test $tcl_cv_ld_single_module = yes], [ - SHLIB_LD="${SHLIB_LD} -Wl,-single_module" - ]) - # TEA specific: link shlib with current and compatibility version flags - vers=`echo ${PACKAGE_VERSION} | sed -e 's/^\([[0-9]]\{1,5\}\)\(\(\.[[0-9]]\{1,3\}\)\{0,2\}\).*$/\1\2/p' -e d` - SHLIB_LD="${SHLIB_LD} -current_version ${vers:-0} -compatibility_version ${vers:-0}" - SHLIB_SUFFIX=".dylib" - # Don't use -prebind when building for Mac OS X 10.4 or later only: - AS_IF([test "`echo "${MACOSX_DEPLOYMENT_TARGET}" | awk -F '10\\.' '{print int([$]2)}'`" -lt 4 -a \ - "`echo "${CPPFLAGS}" | awk -F '-mmacosx-version-min=10\\.' '{print int([$]2)}'`" -lt 4], [ - LDFLAGS="$LDFLAGS -prebind"]) - LDFLAGS="$LDFLAGS -headerpad_max_install_names" - AC_CACHE_CHECK([if ld accepts -search_paths_first flag], - tcl_cv_ld_search_paths_first, [ - hold_ldflags=$LDFLAGS - LDFLAGS="$LDFLAGS -Wl,-search_paths_first" - AC_TRY_LINK(, [int i;], tcl_cv_ld_search_paths_first=yes, - tcl_cv_ld_search_paths_first=no) - LDFLAGS=$hold_ldflags]) - AS_IF([test $tcl_cv_ld_search_paths_first = yes], [ - LDFLAGS="$LDFLAGS -Wl,-search_paths_first" - ]) - AS_IF([test "$tcl_cv_cc_visibility_hidden" != yes], [ - AC_DEFINE(MODULE_SCOPE, [__private_extern__], - [Compiler support for module scope symbols]) - tcl_cv_cc_visibility_hidden=yes - ]) - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - LD_LIBRARY_PATH_VAR="DYLD_LIBRARY_PATH" - # TEA specific: for combined 32 & 64 bit fat builds of Tk - # extensions, verify that 64-bit build is possible. - AS_IF([test "$fat_32_64" = yes && test -n "${TK_BIN_DIR}"], [ - AS_IF([test "${TEA_WINDOWINGSYSTEM}" = x11], [ - AC_CACHE_CHECK([for 64-bit X11], tcl_cv_lib_x11_64, [ - for v in CFLAGS CPPFLAGS LDFLAGS; do - eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc / /g" -e "s/-arch i386 / /g"`"' - done - CPPFLAGS="$CPPFLAGS -I/usr/X11R6/include" - LDFLAGS="$LDFLAGS -L/usr/X11R6/lib -lX11" - AC_TRY_LINK([#include ], [XrmInitialize();], - tcl_cv_lib_x11_64=yes, tcl_cv_lib_x11_64=no) - for v in CFLAGS CPPFLAGS LDFLAGS; do - eval $v'="$hold_'$v'"' - done]) - ]) - AS_IF([test "${TEA_WINDOWINGSYSTEM}" = aqua], [ - AC_CACHE_CHECK([for 64-bit Tk], tcl_cv_lib_tk_64, [ - for v in CFLAGS CPPFLAGS LDFLAGS; do - eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc / /g" -e "s/-arch i386 / /g"`"' - done - CPPFLAGS="$CPPFLAGS -DUSE_TCL_STUBS=1 -DUSE_TK_STUBS=1 ${TCL_INCLUDES} ${TK_INCLUDES}" - LDFLAGS="$LDFLAGS ${TCL_STUB_LIB_SPEC} ${TK_STUB_LIB_SPEC}" - AC_TRY_LINK([#include ], [Tk_InitStubs(NULL, "", 0);], - tcl_cv_lib_tk_64=yes, tcl_cv_lib_tk_64=no) - for v in CFLAGS CPPFLAGS LDFLAGS; do - eval $v'="$hold_'$v'"' - done]) - ]) - # remove 64-bit arch flags from CFLAGS et al. if configuration - # does not support 64-bit. - AS_IF([test "$tcl_cv_lib_tk_64" = no -o "$tcl_cv_lib_x11_64" = no], [ - AC_MSG_NOTICE([Removing 64-bit architectures from compiler & linker flags]) - for v in CFLAGS CPPFLAGS LDFLAGS; do - eval $v'="`echo "$'$v' "|sed -e "s/-arch ppc64 / /g" -e "s/-arch x86_64 / /g"`"' - done]) - ]) - ;; - OS/390-*) - CFLAGS_OPTIMIZE="" # Optimizer is buggy - AC_DEFINE(_OE_SOCKETS, 1, # needed in sys/socket.h - [Should OS/390 do the right thing with sockets?]) - ;; - OSF1-V*) - # Digital OSF/1 - SHLIB_CFLAGS="" - AS_IF([test "$SHARED_BUILD" = 1], [ - SHLIB_LD='ld -shared -expect_unresolved "*"' - ], [ - SHLIB_LD='ld -non_shared -expect_unresolved "*"' - ]) - SHLIB_SUFFIX=".so" - AS_IF([test $doRpath = yes], [ - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}']) - AS_IF([test "$GCC" = yes], [CFLAGS="$CFLAGS -mieee"], [ - CFLAGS="$CFLAGS -DHAVE_TZSET -std1 -ieee"]) - # see pthread_intro(3) for pthread support on osf1, k.furukawa - AS_IF([test "${TCL_THREADS}" = 1], [ - CFLAGS="$CFLAGS -DHAVE_PTHREAD_ATTR_SETSTACKSIZE" - CFLAGS="$CFLAGS -DTCL_THREAD_STACK_MIN=PTHREAD_STACK_MIN*64" - LIBS=`echo $LIBS | sed s/-lpthreads//` - AS_IF([test "$GCC" = yes], [ - LIBS="$LIBS -lpthread -lmach -lexc" - ], [ - CFLAGS="$CFLAGS -pthread" - LDFLAGS="$LDFLAGS -pthread" - ]) - ]) - ;; - QNX-6*) - # QNX RTP - # This may work for all QNX, but it was only reported for v6. - SHLIB_CFLAGS="-fPIC" - SHLIB_LD="ld -Bshareable -x" - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - ;; - SCO_SV-3.2*) - AS_IF([test "$GCC" = yes], [ - SHLIB_CFLAGS="-fPIC -melf" - LDFLAGS="$LDFLAGS -melf -Wl,-Bexport" - ], [ - SHLIB_CFLAGS="-Kpic -belf" - LDFLAGS="$LDFLAGS -belf -Wl,-Bexport" - ]) - SHLIB_LD="ld -G" - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - ;; - SunOS-5.[[0-6]]) - # Careful to not let 5.10+ fall into this case - - # Note: If _REENTRANT isn't defined, then Solaris - # won't define thread-safe library routines. - - AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?]) - AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1, - [Do we really want to follow the standard? Yes we do!]) - - SHLIB_CFLAGS="-KPIC" - SHLIB_SUFFIX=".so" - AS_IF([test "$GCC" = yes], [ - SHLIB_LD='${CC} -shared' - CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - ], [ - SHLIB_LD="/usr/ccs/bin/ld -G -z text" - CC_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - ]) - ;; - SunOS-5*) - # Note: If _REENTRANT isn't defined, then Solaris - # won't define thread-safe library routines. - - AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?]) - AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1, - [Do we really want to follow the standard? Yes we do!]) - - SHLIB_CFLAGS="-KPIC" - - # Check to enable 64-bit flags for compiler/linker - AS_IF([test "$do64bit" = yes], [ - arch=`isainfo` - AS_IF([test "$arch" = "sparcv9 sparc"], [ - AS_IF([test "$GCC" = yes], [ - AS_IF([test "`${CC} -dumpversion | awk -F. '{print [$]1}'`" -lt 3], [ - AC_MSG_WARN([64bit mode not supported with GCC < 3.2 on $system]) - ], [ - do64bit_ok=yes - CFLAGS="$CFLAGS -m64 -mcpu=v9" - LDFLAGS="$LDFLAGS -m64 -mcpu=v9" - SHLIB_CFLAGS="-fPIC" - ]) - ], [ - do64bit_ok=yes - AS_IF([test "$do64bitVIS" = yes], [ - CFLAGS="$CFLAGS -xarch=v9a" - LDFLAGS_ARCH="-xarch=v9a" - ], [ - CFLAGS="$CFLAGS -xarch=v9" - LDFLAGS_ARCH="-xarch=v9" - ]) - # Solaris 64 uses this as well - #LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH_64" - ]) - ], [AS_IF([test "$arch" = "amd64 i386"], [ - AS_IF([test "$GCC" = yes], [ - case $system in - SunOS-5.1[[1-9]]*|SunOS-5.[[2-9]][[0-9]]*) - do64bit_ok=yes - CFLAGS="$CFLAGS -m64" - LDFLAGS="$LDFLAGS -m64";; - *) - AC_MSG_WARN([64bit mode not supported with GCC on $system]);; - esac - ], [ - do64bit_ok=yes - case $system in - SunOS-5.1[[1-9]]*|SunOS-5.[[2-9]][[0-9]]*) - CFLAGS="$CFLAGS -m64" - LDFLAGS="$LDFLAGS -m64";; - *) - CFLAGS="$CFLAGS -xarch=amd64" - LDFLAGS="$LDFLAGS -xarch=amd64";; - esac - ]) - ], [AC_MSG_WARN([64bit mode not supported for $arch])])]) - ]) - - SHLIB_SUFFIX=".so" - AS_IF([test "$GCC" = yes], [ - SHLIB_LD='${CC} -shared' - CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - AS_IF([test "$do64bit_ok" = yes], [ - AS_IF([test "$arch" = "sparcv9 sparc"], [ - # We need to specify -static-libgcc or we need to - # add the path to the sparv9 libgcc. - # JH: static-libgcc is necessary for core Tcl, but may - # not be necessary for extensions. - SHLIB_LD="$SHLIB_LD -m64 -mcpu=v9 -static-libgcc" - # for finding sparcv9 libgcc, get the regular libgcc - # path, remove so name and append 'sparcv9' - #v9gcclibdir="`gcc -print-file-name=libgcc_s.so` | ..." - #CC_SEARCH_FLAGS="${CC_SEARCH_FLAGS},-R,$v9gcclibdir" - ], [AS_IF([test "$arch" = "amd64 i386"], [ - # JH: static-libgcc is necessary for core Tcl, but may - # not be necessary for extensions. - SHLIB_LD="$SHLIB_LD -m64 -static-libgcc" - ])]) - ]) - ], [ - case $system in - SunOS-5.[[1-9]][[0-9]]*) - # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS - SHLIB_LD='${CC} -G -z text ${LDFLAGS_DEFAULT}';; - *) - SHLIB_LD='/usr/ccs/bin/ld -G -z text';; - esac - CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' - ]) - ;; - UNIX_SV* | UnixWare-5*) - SHLIB_CFLAGS="-KPIC" - SHLIB_LD='${CC} -G' - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - # Some UNIX_SV* systems (unixware 1.1.2 for example) have linkers - # that don't grok the -Bexport option. Test that it does. - AC_CACHE_CHECK([for ld accepts -Bexport flag], tcl_cv_ld_Bexport, [ - hold_ldflags=$LDFLAGS - LDFLAGS="$LDFLAGS -Wl,-Bexport" - AC_TRY_LINK(, [int i;], tcl_cv_ld_Bexport=yes, tcl_cv_ld_Bexport=no) - LDFLAGS=$hold_ldflags]) - AS_IF([test $tcl_cv_ld_Bexport = yes], [ - LDFLAGS="$LDFLAGS -Wl,-Bexport" - ]) - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - ;; - esac - - AS_IF([test "$do64bit" = yes -a "$do64bit_ok" = no], [ - AC_MSG_WARN([64bit support being disabled -- don't know magic for this platform]) - ]) - -dnl # Add any CPPFLAGS set in the environment to our CFLAGS, but delay doing so -dnl # until the end of configure, as configure's compile and link tests use -dnl # both CPPFLAGS and CFLAGS (unlike our compile and link) but configure's -dnl # preprocessing tests use only CPPFLAGS. - AC_CONFIG_COMMANDS_PRE([CFLAGS="${CFLAGS} ${CPPFLAGS}"; CPPFLAGS=""]) - - # Add in the arch flags late to ensure it wasn't removed. - # Not necessary in TEA, but this is aligned with core - LDFLAGS="$LDFLAGS $LDFLAGS_ARCH" - - # If we're running gcc, then change the C flags for compiling shared - # libraries to the right flags for gcc, instead of those for the - # standard manufacturer compiler. - - AS_IF([test "$GCC" = yes], [ - case $system in - AIX-*) ;; - BSD/OS*) ;; - CYGWIN_*|MINGW32_*|MINGW64_*) ;; - IRIX*) ;; - NetBSD-*|DragonFly-*|FreeBSD-*|OpenBSD-*) ;; - Darwin-*) ;; - SCO_SV-3.2*) ;; - windows) ;; - *) SHLIB_CFLAGS="-fPIC" ;; - esac]) - - AS_IF([test "$tcl_cv_cc_visibility_hidden" != yes], [ - AC_DEFINE(MODULE_SCOPE, [extern], - [No Compiler support for module scope symbols]) - ]) - - AS_IF([test "$SHARED_LIB_SUFFIX" = ""], [ - # TEA specific: use PACKAGE_VERSION instead of VERSION - SHARED_LIB_SUFFIX='${PACKAGE_VERSION}${SHLIB_SUFFIX}']) - AS_IF([test "$UNSHARED_LIB_SUFFIX" = ""], [ - # TEA specific: use PACKAGE_VERSION instead of VERSION - UNSHARED_LIB_SUFFIX='${PACKAGE_VERSION}.a']) - - if test "${GCC}" = "yes" -a ${SHLIB_SUFFIX} = ".dll"; then - AC_CACHE_CHECK(for SEH support in compiler, - tcl_cv_seh, - AC_TRY_RUN([ -#define WIN32_LEAN_AND_MEAN -#include -#undef WIN32_LEAN_AND_MEAN - - int main(int argc, char** argv) { - int a, b = 0; - __try { - a = 666 / b; - } - __except (EXCEPTION_EXECUTE_HANDLER) { - return 0; - } - return 1; - } - ], - tcl_cv_seh=yes, - tcl_cv_seh=no, - tcl_cv_seh=no) - ) - if test "$tcl_cv_seh" = "no" ; then - AC_DEFINE(HAVE_NO_SEH, 1, - [Defined when mingw does not support SEH]) - fi - - # - # Check to see if the excpt.h include file provided contains the - # definition for EXCEPTION_DISPOSITION; if not, which is the case - # with Cygwin's version as of 2002-04-10, define it to be int, - # sufficient for getting the current code to work. - # - AC_CACHE_CHECK(for EXCEPTION_DISPOSITION support in include files, - tcl_cv_eh_disposition, - AC_TRY_COMPILE([ -# define WIN32_LEAN_AND_MEAN -# include -# undef WIN32_LEAN_AND_MEAN - ],[ - EXCEPTION_DISPOSITION x; - ], - tcl_cv_eh_disposition=yes, - tcl_cv_eh_disposition=no) - ) - if test "$tcl_cv_eh_disposition" = "no" ; then - AC_DEFINE(EXCEPTION_DISPOSITION, int, - [Defined when cygwin/mingw does not support EXCEPTION DISPOSITION]) - fi - - # Check to see if winnt.h defines CHAR, SHORT, and LONG - # even if VOID has already been #defined. The win32api - # used by mingw and cygwin is known to do this. - - AC_CACHE_CHECK(for winnt.h that ignores VOID define, - tcl_cv_winnt_ignore_void, - AC_TRY_COMPILE([ -#define VOID void -#define WIN32_LEAN_AND_MEAN -#include -#undef WIN32_LEAN_AND_MEAN - ], [ - CHAR c; - SHORT s; - LONG l; - ], - tcl_cv_winnt_ignore_void=yes, - tcl_cv_winnt_ignore_void=no) - ) - if test "$tcl_cv_winnt_ignore_void" = "yes" ; then - AC_DEFINE(HAVE_WINNT_IGNORE_VOID, 1, - [Defined when cygwin/mingw ignores VOID define in winnt.h]) - fi - fi - - # See if the compiler supports casting to a union type. - # This is used to stop gcc from printing a compiler - # warning when initializing a union member. - - AC_CACHE_CHECK(for cast to union support, - tcl_cv_cast_to_union, - AC_TRY_COMPILE([], - [ - union foo { int i; double d; }; - union foo f = (union foo) (int) 0; - ], - tcl_cv_cast_to_union=yes, - tcl_cv_cast_to_union=no) - ) - if test "$tcl_cv_cast_to_union" = "yes"; then - AC_DEFINE(HAVE_CAST_TO_UNION, 1, - [Defined when compiler supports casting to union type.]) - fi - - AC_SUBST(CFLAGS_DEBUG) - AC_SUBST(CFLAGS_OPTIMIZE) - AC_SUBST(CFLAGS_WARNING) - - AC_SUBST(STLIB_LD) - AC_SUBST(SHLIB_LD) - - AC_SUBST(SHLIB_LD_LIBS) - AC_SUBST(SHLIB_CFLAGS) - - AC_SUBST(LD_LIBRARY_PATH_VAR) - - # These must be called after we do the basic CFLAGS checks and - # verify any possible 64-bit or similar switches are necessary - TEA_TCL_EARLY_FLAGS - TEA_TCL_64BIT_FLAGS -]) - -#-------------------------------------------------------------------- -# TEA_SERIAL_PORT -# -# Determine which interface to use to talk to the serial port. -# Note that #include lines must begin in leftmost column for -# some compilers to recognize them as preprocessor directives, -# and some build environments have stdin not pointing at a -# pseudo-terminal (usually /dev/null instead.) -# -# Arguments: -# none -# -# Results: -# -# Defines only one of the following vars: -# HAVE_SYS_MODEM_H -# USE_TERMIOS -# USE_TERMIO -# USE_SGTTY -#-------------------------------------------------------------------- - -AC_DEFUN([TEA_SERIAL_PORT], [ - AC_CHECK_HEADERS(sys/modem.h) - AC_CACHE_CHECK([termios vs. termio vs. sgtty], tcl_cv_api_serial, [ - AC_TRY_RUN([ -#include - -int main() { - struct termios t; - if (tcgetattr(0, &t) == 0) { - cfsetospeed(&t, 0); - t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB; - return 0; - } - return 1; -}], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no) - if test $tcl_cv_api_serial = no ; then - AC_TRY_RUN([ -#include - -int main() { - struct termio t; - if (ioctl(0, TCGETA, &t) == 0) { - t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB; - return 0; - } - return 1; -}], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no) - fi - if test $tcl_cv_api_serial = no ; then - AC_TRY_RUN([ -#include - -int main() { - struct sgttyb t; - if (ioctl(0, TIOCGETP, &t) == 0) { - t.sg_ospeed = 0; - t.sg_flags |= ODDP | EVENP | RAW; - return 0; - } - return 1; -}], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=no, tcl_cv_api_serial=no) - fi - if test $tcl_cv_api_serial = no ; then - AC_TRY_RUN([ -#include -#include - -int main() { - struct termios t; - if (tcgetattr(0, &t) == 0 - || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { - cfsetospeed(&t, 0); - t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB; - return 0; - } - return 1; -}], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no) - fi - if test $tcl_cv_api_serial = no; then - AC_TRY_RUN([ -#include -#include - -int main() { - struct termio t; - if (ioctl(0, TCGETA, &t) == 0 - || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { - t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB; - return 0; - } - return 1; - }], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no) - fi - if test $tcl_cv_api_serial = no; then - AC_TRY_RUN([ -#include -#include - -int main() { - struct sgttyb t; - if (ioctl(0, TIOCGETP, &t) == 0 - || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { - t.sg_ospeed = 0; - t.sg_flags |= ODDP | EVENP | RAW; - return 0; - } - return 1; -}], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=none, tcl_cv_api_serial=none) - fi]) - case $tcl_cv_api_serial in - termios) AC_DEFINE(USE_TERMIOS, 1, [Use the termios API for serial lines]);; - termio) AC_DEFINE(USE_TERMIO, 1, [Use the termio API for serial lines]);; - sgtty) AC_DEFINE(USE_SGTTY, 1, [Use the sgtty API for serial lines]);; - esac -]) - -#-------------------------------------------------------------------- -# TEA_PATH_X -# -# Locate the X11 header files and the X11 library archive. Try -# the ac_path_x macro first, but if it doesn't find the X stuff -# (e.g. because there's no xmkmf program) then check through -# a list of possible directories. Under some conditions the -# autoconf macro will return an include directory that contains -# no include files, so double-check its result just to be safe. -# -# This should be called after TEA_CONFIG_CFLAGS as setting the -# LIBS line can confuse some configure macro magic. -# -# Arguments: -# none -# -# Results: -# -# Sets the following vars: -# XINCLUDES -# XLIBSW -# PKG_LIBS (appends to) -#-------------------------------------------------------------------- - -AC_DEFUN([TEA_PATH_X], [ - if test "${TEA_WINDOWINGSYSTEM}" = "x11" ; then - TEA_PATH_UNIX_X - fi -]) - -AC_DEFUN([TEA_PATH_UNIX_X], [ - AC_PATH_X - not_really_there="" - if test "$no_x" = ""; then - if test "$x_includes" = ""; then - AC_TRY_CPP([#include ], , not_really_there="yes") - else - if test ! -r $x_includes/X11/Xlib.h; then - not_really_there="yes" - fi - fi - fi - if test "$no_x" = "yes" -o "$not_really_there" = "yes"; then - AC_MSG_CHECKING([for X11 header files]) - found_xincludes="no" - AC_TRY_CPP([#include ], found_xincludes="yes", found_xincludes="no") - if test "$found_xincludes" = "no"; then - dirs="/usr/unsupported/include /usr/local/include /usr/X386/include /usr/X11R6/include /usr/X11R5/include /usr/include/X11R5 /usr/include/X11R4 /usr/openwin/include /usr/X11/include /usr/sww/include" - for i in $dirs ; do - if test -r $i/X11/Xlib.h; then - AC_MSG_RESULT([$i]) - XINCLUDES=" -I$i" - found_xincludes="yes" - break - fi - done - fi - else - if test "$x_includes" != ""; then - XINCLUDES="-I$x_includes" - found_xincludes="yes" - fi - fi - if test "$found_xincludes" = "no"; then - AC_MSG_RESULT([couldn't find any!]) - fi - - if test "$no_x" = yes; then - AC_MSG_CHECKING([for X11 libraries]) - XLIBSW=nope - dirs="/usr/unsupported/lib /usr/local/lib /usr/X386/lib /usr/X11R6/lib /usr/X11R5/lib /usr/lib/X11R5 /usr/lib/X11R4 /usr/openwin/lib /usr/X11/lib /usr/sww/X11/lib" - for i in $dirs ; do - if test -r $i/libX11.a -o -r $i/libX11.so -o -r $i/libX11.sl -o -r $i/libX11.dylib; then - AC_MSG_RESULT([$i]) - XLIBSW="-L$i -lX11" - x_libraries="$i" - break - fi - done - else - if test "$x_libraries" = ""; then - XLIBSW=-lX11 - else - XLIBSW="-L$x_libraries -lX11" - fi - fi - if test "$XLIBSW" = nope ; then - AC_CHECK_LIB(Xwindow, XCreateWindow, XLIBSW=-lXwindow) - fi - if test "$XLIBSW" = nope ; then - AC_MSG_RESULT([could not find any! Using -lX11.]) - XLIBSW=-lX11 - fi - # TEA specific: - if test x"${XLIBSW}" != x ; then - PKG_LIBS="${PKG_LIBS} ${XLIBSW}" - fi -]) - -#-------------------------------------------------------------------- -# TEA_BLOCKING_STYLE -# -# The statements below check for systems where POSIX-style -# non-blocking I/O (O_NONBLOCK) doesn't work or is unimplemented. -# On these systems (mostly older ones), use the old BSD-style -# FIONBIO approach instead. -# -# Arguments: -# none -# -# Results: -# -# Defines some of the following vars: -# HAVE_SYS_IOCTL_H -# HAVE_SYS_FILIO_H -# USE_FIONBIO -# O_NONBLOCK -#-------------------------------------------------------------------- - -AC_DEFUN([TEA_BLOCKING_STYLE], [ - AC_CHECK_HEADERS(sys/ioctl.h) - AC_CHECK_HEADERS(sys/filio.h) - TEA_CONFIG_SYSTEM - AC_MSG_CHECKING([FIONBIO vs. O_NONBLOCK for nonblocking I/O]) - case $system in - OSF*) - AC_DEFINE(USE_FIONBIO, 1, [Should we use FIONBIO?]) - AC_MSG_RESULT([FIONBIO]) - ;; - *) - AC_MSG_RESULT([O_NONBLOCK]) - ;; - esac -]) - -#-------------------------------------------------------------------- -# TEA_TIME_HANDLER -# -# Checks how the system deals with time.h, what time structures -# are used on the system, and what fields the structures have. -# -# Arguments: -# none -# -# Results: -# -# Defines some of the following vars: -# USE_DELTA_FOR_TZ -# HAVE_TM_GMTOFF -# HAVE_TM_TZADJ -# HAVE_TIMEZONE_VAR -#-------------------------------------------------------------------- - -AC_DEFUN([TEA_TIME_HANDLER], [ - AC_CHECK_HEADERS(sys/time.h) - AC_HEADER_TIME - AC_STRUCT_TIMEZONE - - AC_CHECK_FUNCS(gmtime_r localtime_r) - - AC_CACHE_CHECK([tm_tzadj in struct tm], tcl_cv_member_tm_tzadj, [ - AC_TRY_COMPILE([#include ], [struct tm tm; tm.tm_tzadj;], - tcl_cv_member_tm_tzadj=yes, tcl_cv_member_tm_tzadj=no)]) - if test $tcl_cv_member_tm_tzadj = yes ; then - AC_DEFINE(HAVE_TM_TZADJ, 1, [Should we use the tm_tzadj field of struct tm?]) - fi - - AC_CACHE_CHECK([tm_gmtoff in struct tm], tcl_cv_member_tm_gmtoff, [ - AC_TRY_COMPILE([#include ], [struct tm tm; tm.tm_gmtoff;], - tcl_cv_member_tm_gmtoff=yes, tcl_cv_member_tm_gmtoff=no)]) - if test $tcl_cv_member_tm_gmtoff = yes ; then - AC_DEFINE(HAVE_TM_GMTOFF, 1, [Should we use the tm_gmtoff field of struct tm?]) - fi - - # - # Its important to include time.h in this check, as some systems - # (like convex) have timezone functions, etc. - # - AC_CACHE_CHECK([long timezone variable], tcl_cv_timezone_long, [ - AC_TRY_COMPILE([#include ], - [extern long timezone; - timezone += 1; - exit (0);], - tcl_cv_timezone_long=yes, tcl_cv_timezone_long=no)]) - if test $tcl_cv_timezone_long = yes ; then - AC_DEFINE(HAVE_TIMEZONE_VAR, 1, [Should we use the global timezone variable?]) - else - # - # On some systems (eg IRIX 6.2), timezone is a time_t and not a long. - # - AC_CACHE_CHECK([time_t timezone variable], tcl_cv_timezone_time, [ - AC_TRY_COMPILE([#include ], - [extern time_t timezone; - timezone += 1; - exit (0);], - tcl_cv_timezone_time=yes, tcl_cv_timezone_time=no)]) - if test $tcl_cv_timezone_time = yes ; then - AC_DEFINE(HAVE_TIMEZONE_VAR, 1, [Should we use the global timezone variable?]) - fi - fi -]) - -#-------------------------------------------------------------------- -# TEA_BUGGY_STRTOD -# -# Under Solaris 2.4, strtod returns the wrong value for the -# terminating character under some conditions. Check for this -# and if the problem exists use a substitute procedure -# "fixstrtod" (provided by Tcl) that corrects the error. -# Also, on Compaq's Tru64 Unix 5.0, -# strtod(" ") returns 0.0 instead of a failure to convert. -# -# Arguments: -# none -# -# Results: -# -# Might defines some of the following vars: -# strtod (=fixstrtod) -#-------------------------------------------------------------------- - -AC_DEFUN([TEA_BUGGY_STRTOD], [ - AC_CHECK_FUNC(strtod, tcl_strtod=1, tcl_strtod=0) - if test "$tcl_strtod" = 1; then - AC_CACHE_CHECK([for Solaris2.4/Tru64 strtod bugs], tcl_cv_strtod_buggy,[ - AC_TRY_RUN([ - extern double strtod(); - int main() { - char *infString="Inf", *nanString="NaN", *spaceString=" "; - char *term; - double value; - value = strtod(infString, &term); - if ((term != infString) && (term[-1] == 0)) { - exit(1); - } - value = strtod(nanString, &term); - if ((term != nanString) && (term[-1] == 0)) { - exit(1); - } - value = strtod(spaceString, &term); - if (term == (spaceString+1)) { - exit(1); - } - exit(0); - }], tcl_cv_strtod_buggy=ok, tcl_cv_strtod_buggy=buggy, - tcl_cv_strtod_buggy=buggy)]) - if test "$tcl_cv_strtod_buggy" = buggy; then - AC_LIBOBJ([fixstrtod]) - USE_COMPAT=1 - AC_DEFINE(strtod, fixstrtod, [Do we want to use the strtod() in compat?]) - fi - fi -]) - -#-------------------------------------------------------------------- -# TEA_TCL_EARLY_FLAGS -# -# Check for what flags are needed to be passed so the correct OS -# features are available. -# -# Arguments: -# None -# -# Results: -# -# Might define the following vars: -# _ISOC99_SOURCE -# _LARGEFILE64_SOURCE -# _LARGEFILE_SOURCE64 -#-------------------------------------------------------------------- - -AC_DEFUN([TEA_TCL_EARLY_FLAG],[ - AC_CACHE_VAL([tcl_cv_flag_]translit($1,[A-Z],[a-z]), - AC_TRY_COMPILE([$2], $3, [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no, - AC_TRY_COMPILE([[#define ]$1[ 1 -]$2], $3, - [tcl_cv_flag_]translit($1,[A-Z],[a-z])=yes, - [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no))) - if test ["x${tcl_cv_flag_]translit($1,[A-Z],[a-z])[}" = "xyes"] ; then - AC_DEFINE($1, 1, [Add the ]$1[ flag when building]) - tcl_flags="$tcl_flags $1" - fi -]) - -AC_DEFUN([TEA_TCL_EARLY_FLAGS],[ - AC_MSG_CHECKING([for required early compiler flags]) - tcl_flags="" - TEA_TCL_EARLY_FLAG(_ISOC99_SOURCE,[#include ], - [char *p = (char *)strtoll; char *q = (char *)strtoull;]) - TEA_TCL_EARLY_FLAG(_LARGEFILE64_SOURCE,[#include ], - [struct stat64 buf; int i = stat64("/", &buf);]) - TEA_TCL_EARLY_FLAG(_LARGEFILE_SOURCE64,[#include ], - [char *p = (char *)open64;]) - if test "x${tcl_flags}" = "x" ; then - AC_MSG_RESULT([none]) - else - AC_MSG_RESULT([${tcl_flags}]) - fi -]) - -#-------------------------------------------------------------------- -# TEA_TCL_64BIT_FLAGS -# -# Check for what is defined in the way of 64-bit features. -# -# Arguments: -# None -# -# Results: -# -# Might define the following vars: -# TCL_WIDE_INT_IS_LONG -# TCL_WIDE_INT_TYPE -# HAVE_STRUCT_DIRENT64 -# HAVE_STRUCT_STAT64 -# HAVE_TYPE_OFF64_T -#-------------------------------------------------------------------- - -AC_DEFUN([TEA_TCL_64BIT_FLAGS], [ - AC_MSG_CHECKING([for 64-bit integer type]) - AC_CACHE_VAL(tcl_cv_type_64bit,[ - tcl_cv_type_64bit=none - # See if the compiler knows natively about __int64 - AC_TRY_COMPILE(,[__int64 value = (__int64) 0;], - tcl_type_64bit=__int64, tcl_type_64bit="long long") - # See if we should use long anyway Note that we substitute in the - # type that is our current guess for a 64-bit type inside this check - # program, so it should be modified only carefully... - AC_TRY_COMPILE(,[switch (0) { - case 1: case (sizeof(]${tcl_type_64bit}[)==sizeof(long)): ; - }],tcl_cv_type_64bit=${tcl_type_64bit})]) - if test "${tcl_cv_type_64bit}" = none ; then - AC_DEFINE(TCL_WIDE_INT_IS_LONG, 1, [Are wide integers to be implemented with C 'long's?]) - AC_MSG_RESULT([using long]) - elif test "${tcl_cv_type_64bit}" = "__int64" \ - -a "${TEA_PLATFORM}" = "windows" ; then - # TEA specific: We actually want to use the default tcl.h checks in - # this case to handle both TCL_WIDE_INT_TYPE and TCL_LL_MODIFIER* - AC_MSG_RESULT([using Tcl header defaults]) - else - AC_DEFINE_UNQUOTED(TCL_WIDE_INT_TYPE,${tcl_cv_type_64bit}, - [What type should be used to define wide integers?]) - AC_MSG_RESULT([${tcl_cv_type_64bit}]) - - # Now check for auxiliary declarations - AC_CACHE_CHECK([for struct dirent64], tcl_cv_struct_dirent64,[ - AC_TRY_COMPILE([#include -#include ],[struct dirent64 p;], - tcl_cv_struct_dirent64=yes,tcl_cv_struct_dirent64=no)]) - if test "x${tcl_cv_struct_dirent64}" = "xyes" ; then - AC_DEFINE(HAVE_STRUCT_DIRENT64, 1, [Is 'struct dirent64' in ?]) - fi - - AC_CACHE_CHECK([for struct stat64], tcl_cv_struct_stat64,[ - AC_TRY_COMPILE([#include ],[struct stat64 p; -], - tcl_cv_struct_stat64=yes,tcl_cv_struct_stat64=no)]) - if test "x${tcl_cv_struct_stat64}" = "xyes" ; then - AC_DEFINE(HAVE_STRUCT_STAT64, 1, [Is 'struct stat64' in ?]) - fi - - AC_CHECK_FUNCS(open64 lseek64) - AC_MSG_CHECKING([for off64_t]) - AC_CACHE_VAL(tcl_cv_type_off64_t,[ - AC_TRY_COMPILE([#include ],[off64_t offset; -], - tcl_cv_type_off64_t=yes,tcl_cv_type_off64_t=no)]) - dnl Define HAVE_TYPE_OFF64_T only when the off64_t type and the - dnl functions lseek64 and open64 are defined. - if test "x${tcl_cv_type_off64_t}" = "xyes" && \ - test "x${ac_cv_func_lseek64}" = "xyes" && \ - test "x${ac_cv_func_open64}" = "xyes" ; then - AC_DEFINE(HAVE_TYPE_OFF64_T, 1, [Is off64_t in ?]) - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - fi - fi -]) - -## -## Here ends the standard Tcl configuration bits and starts the -## TEA specific functions -## - -#------------------------------------------------------------------------ -# TEA_INIT -- -# -# Init various Tcl Extension Architecture (TEA) variables. -# This should be the first called TEA_* macro. -# -# Arguments: -# none -# -# Results: -# -# Defines and substs the following vars: -# CYGPATH -# EXEEXT -# Defines only: -# TEA_VERSION -# TEA_INITED -# TEA_PLATFORM (windows or unix) -# -# "cygpath" is used on windows to generate native path names for include -# files. These variables should only be used with the compiler and linker -# since they generate native path names. -# -# EXEEXT -# Select the executable extension based on the host type. This -# is a lightweight replacement for AC_EXEEXT that doesn't require -# a compiler. -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_INIT], [ - TEA_VERSION="3.13" - - AC_MSG_CHECKING([TEA configuration]) - if test x"${PACKAGE_NAME}" = x ; then - AC_MSG_ERROR([ -The PACKAGE_NAME variable must be defined by your TEA configure.ac]) - fi - AC_MSG_RESULT([ok (TEA ${TEA_VERSION})]) - - # If the user did not set CFLAGS, set it now to keep macros - # like AC_PROG_CC and AC_TRY_COMPILE from adding "-g -O2". - if test "${CFLAGS+set}" != "set" ; then - CFLAGS="" - fi - - case "`uname -s`" in - *win32*|*WIN32*|*MINGW32_*|*MINGW64_*) - AC_CHECK_PROG(CYGPATH, cygpath, cygpath -m, echo) - EXEEXT=".exe" - TEA_PLATFORM="windows" - ;; - *CYGWIN_*) - EXEEXT=".exe" - # CYGPATH and TEA_PLATFORM are determined later in LOAD_TCLCONFIG - ;; - *) - CYGPATH=echo - # Maybe we are cross-compiling.... - case ${host_alias} in - *mingw32*) - EXEEXT=".exe" - TEA_PLATFORM="windows" - ;; - *) - EXEEXT="" - TEA_PLATFORM="unix" - ;; - esac - ;; - esac - - # Check if exec_prefix is set. If not use fall back to prefix. - # Note when adjusted, so that TEA_PREFIX can correct for this. - # This is needed for recursive configures, since autoconf propagates - # $prefix, but not $exec_prefix (doh!). - if test x$exec_prefix = xNONE ; then - exec_prefix_default=yes - exec_prefix=$prefix - fi - - AC_MSG_NOTICE([configuring ${PACKAGE_NAME} ${PACKAGE_VERSION}]) - - AC_SUBST(EXEEXT) - AC_SUBST(CYGPATH) - - # This package name must be replaced statically for AC_SUBST to work - AC_SUBST(PKG_LIB_FILE) - # Substitute STUB_LIB_FILE in case package creates a stub library too. - AC_SUBST(PKG_STUB_LIB_FILE) - - # We AC_SUBST these here to ensure they are subst'ed, - # in case the user doesn't call TEA_ADD_... - AC_SUBST(PKG_STUB_SOURCES) - AC_SUBST(PKG_STUB_OBJECTS) - AC_SUBST(PKG_TCL_SOURCES) - AC_SUBST(PKG_HEADERS) - AC_SUBST(PKG_INCLUDES) - AC_SUBST(PKG_LIBS) - AC_SUBST(PKG_CFLAGS) - - # Configure the installer. - TEA_INSTALLER -]) - -#------------------------------------------------------------------------ -# TEA_ADD_SOURCES -- -# -# Specify one or more source files. Users should check for -# the right platform before adding to their list. -# It is not important to specify the directory, as long as it is -# in the generic, win or unix subdirectory of $(srcdir). -# -# Arguments: -# one or more file names -# -# Results: -# -# Defines and substs the following vars: -# PKG_SOURCES -# PKG_OBJECTS -#------------------------------------------------------------------------ -AC_DEFUN([TEA_ADD_SOURCES], [ - vars="$@" - for i in $vars; do - case $i in - [\$]*) - # allow $-var names - PKG_SOURCES="$PKG_SOURCES $i" - PKG_OBJECTS="$PKG_OBJECTS $i" - ;; - *) - # check for existence - allows for generic/win/unix VPATH - # To add more dirs here (like 'src'), you have to update VPATH - # in Makefile.in as well - if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ - -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ - -a ! -f "${srcdir}/macosx/$i" \ - ; then - AC_MSG_ERROR([could not find source file '$i']) - fi - PKG_SOURCES="$PKG_SOURCES $i" - # this assumes it is in a VPATH dir - i=`basename $i` - # handle user calling this before or after TEA_SETUP_COMPILER - if test x"${OBJEXT}" != x ; then - j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}" - else - j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}" - fi - PKG_OBJECTS="$PKG_OBJECTS $j" - ;; - esac - done - AC_SUBST(PKG_SOURCES) - AC_SUBST(PKG_OBJECTS) -]) - -#------------------------------------------------------------------------ -# TEA_ADD_STUB_SOURCES -- -# -# Specify one or more source files. Users should check for -# the right platform before adding to their list. -# It is not important to specify the directory, as long as it is -# in the generic, win or unix subdirectory of $(srcdir). -# -# Arguments: -# one or more file names -# -# Results: -# -# Defines and substs the following vars: -# PKG_STUB_SOURCES -# PKG_STUB_OBJECTS -#------------------------------------------------------------------------ -AC_DEFUN([TEA_ADD_STUB_SOURCES], [ - vars="$@" - for i in $vars; do - # check for existence - allows for generic/win/unix VPATH - if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ - -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ - -a ! -f "${srcdir}/macosx/$i" \ - ; then - AC_MSG_ERROR([could not find stub source file '$i']) - fi - PKG_STUB_SOURCES="$PKG_STUB_SOURCES $i" - # this assumes it is in a VPATH dir - i=`basename $i` - # handle user calling this before or after TEA_SETUP_COMPILER - if test x"${OBJEXT}" != x ; then - j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}" - else - j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}" - fi - PKG_STUB_OBJECTS="$PKG_STUB_OBJECTS $j" - done - AC_SUBST(PKG_STUB_SOURCES) - AC_SUBST(PKG_STUB_OBJECTS) -]) - -#------------------------------------------------------------------------ -# TEA_ADD_TCL_SOURCES -- -# -# Specify one or more Tcl source files. These should be platform -# independent runtime files. -# -# Arguments: -# one or more file names -# -# Results: -# -# Defines and substs the following vars: -# PKG_TCL_SOURCES -#------------------------------------------------------------------------ -AC_DEFUN([TEA_ADD_TCL_SOURCES], [ - vars="$@" - for i in $vars; do - # check for existence, be strict because it is installed - if test ! -f "${srcdir}/$i" ; then - AC_MSG_ERROR([could not find tcl source file '${srcdir}/$i']) - fi - PKG_TCL_SOURCES="$PKG_TCL_SOURCES $i" - done - AC_SUBST(PKG_TCL_SOURCES) -]) - -#------------------------------------------------------------------------ -# TEA_ADD_HEADERS -- -# -# Specify one or more source headers. Users should check for -# the right platform before adding to their list. -# -# Arguments: -# one or more file names -# -# Results: -# -# Defines and substs the following vars: -# PKG_HEADERS -#------------------------------------------------------------------------ -AC_DEFUN([TEA_ADD_HEADERS], [ - vars="$@" - for i in $vars; do - # check for existence, be strict because it is installed - if test ! -f "${srcdir}/$i" ; then - AC_MSG_ERROR([could not find header file '${srcdir}/$i']) - fi - PKG_HEADERS="$PKG_HEADERS $i" - done - AC_SUBST(PKG_HEADERS) -]) - -#------------------------------------------------------------------------ -# TEA_ADD_INCLUDES -- -# -# Specify one or more include dirs. Users should check for -# the right platform before adding to their list. -# -# Arguments: -# one or more file names -# -# Results: -# -# Defines and substs the following vars: -# PKG_INCLUDES -#------------------------------------------------------------------------ -AC_DEFUN([TEA_ADD_INCLUDES], [ - vars="$@" - for i in $vars; do - PKG_INCLUDES="$PKG_INCLUDES $i" - done - AC_SUBST(PKG_INCLUDES) -]) - -#------------------------------------------------------------------------ -# TEA_ADD_LIBS -- -# -# Specify one or more libraries. Users should check for -# the right platform before adding to their list. For Windows, -# libraries provided in "foo.lib" format will be converted to -# "-lfoo" when using GCC (mingw). -# -# Arguments: -# one or more file names -# -# Results: -# -# Defines and substs the following vars: -# PKG_LIBS -#------------------------------------------------------------------------ -AC_DEFUN([TEA_ADD_LIBS], [ - vars="$@" - for i in $vars; do - if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then - # Convert foo.lib to -lfoo for GCC. No-op if not *.lib - i=`echo "$i" | sed -e 's/^\([[^-]].*\)\.lib[$]/-l\1/i'` - fi - PKG_LIBS="$PKG_LIBS $i" - done - AC_SUBST(PKG_LIBS) -]) - -#------------------------------------------------------------------------ -# TEA_ADD_CFLAGS -- -# -# Specify one or more CFLAGS. Users should check for -# the right platform before adding to their list. -# -# Arguments: -# one or more file names -# -# Results: -# -# Defines and substs the following vars: -# PKG_CFLAGS -#------------------------------------------------------------------------ -AC_DEFUN([TEA_ADD_CFLAGS], [ - PKG_CFLAGS="$PKG_CFLAGS $@" - AC_SUBST(PKG_CFLAGS) -]) - -#------------------------------------------------------------------------ -# TEA_ADD_CLEANFILES -- -# -# Specify one or more CLEANFILES. -# -# Arguments: -# one or more file names to clean target -# -# Results: -# -# Appends to CLEANFILES, already defined for subst in LOAD_TCLCONFIG -#------------------------------------------------------------------------ -AC_DEFUN([TEA_ADD_CLEANFILES], [ - CLEANFILES="$CLEANFILES $@" -]) - -#------------------------------------------------------------------------ -# TEA_PREFIX -- -# -# Handle the --prefix=... option by defaulting to what Tcl gave -# -# Arguments: -# none -# -# Results: -# -# If --prefix or --exec-prefix was not specified, $prefix and -# $exec_prefix will be set to the values given to Tcl when it was -# configured. -#------------------------------------------------------------------------ -AC_DEFUN([TEA_PREFIX], [ - if test "${prefix}" = "NONE"; then - prefix_default=yes - if test x"${TCL_PREFIX}" != x; then - AC_MSG_NOTICE([--prefix defaulting to TCL_PREFIX ${TCL_PREFIX}]) - prefix=${TCL_PREFIX} - else - AC_MSG_NOTICE([--prefix defaulting to /usr/local]) - prefix=/usr/local - fi - fi - if test "${exec_prefix}" = "NONE" -a x"${prefix_default}" = x"yes" \ - -o x"${exec_prefix_default}" = x"yes" ; then - if test x"${TCL_EXEC_PREFIX}" != x; then - AC_MSG_NOTICE([--exec-prefix defaulting to TCL_EXEC_PREFIX ${TCL_EXEC_PREFIX}]) - exec_prefix=${TCL_EXEC_PREFIX} - else - AC_MSG_NOTICE([--exec-prefix defaulting to ${prefix}]) - exec_prefix=$prefix - fi - fi -]) - -#------------------------------------------------------------------------ -# TEA_SETUP_COMPILER_CC -- -# -# Do compiler checks the way we want. This is just a replacement -# for AC_PROG_CC in TEA configure.ac files to make them cleaner. -# -# Arguments: -# none -# -# Results: -# -# Sets up CC var and other standard bits we need to make executables. -#------------------------------------------------------------------------ -AC_DEFUN([TEA_SETUP_COMPILER_CC], [ - # Don't put any macros that use the compiler (e.g. AC_TRY_COMPILE) - # in this macro, they need to go into TEA_SETUP_COMPILER instead. - - AC_PROG_CC - AC_PROG_CPP - - #-------------------------------------------------------------------- - # Checks to see if the make program sets the $MAKE variable. - #-------------------------------------------------------------------- - - AC_PROG_MAKE_SET - - #-------------------------------------------------------------------- - # Find ranlib - #-------------------------------------------------------------------- - - AC_CHECK_TOOL(RANLIB, ranlib) - - #-------------------------------------------------------------------- - # Determines the correct binary file extension (.o, .obj, .exe etc.) - #-------------------------------------------------------------------- - - AC_OBJEXT - AC_EXEEXT -]) - -#------------------------------------------------------------------------ -# TEA_SETUP_COMPILER -- -# -# Do compiler checks that use the compiler. This must go after -# TEA_SETUP_COMPILER_CC, which does the actual compiler check. -# -# Arguments: -# none -# -# Results: -# -# Sets up CC var and other standard bits we need to make executables. -#------------------------------------------------------------------------ -AC_DEFUN([TEA_SETUP_COMPILER], [ - # Any macros that use the compiler (e.g. AC_TRY_COMPILE) have to go here. - AC_REQUIRE([TEA_SETUP_COMPILER_CC]) - - #------------------------------------------------------------------------ - # If we're using GCC, see if the compiler understands -pipe. If so, use it. - # It makes compiling go faster. (This is only a performance feature.) - #------------------------------------------------------------------------ - - if test -z "$no_pipe" -a -n "$GCC"; then - AC_CACHE_CHECK([if the compiler understands -pipe], - tcl_cv_cc_pipe, [ - hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -pipe" - AC_TRY_COMPILE(,, tcl_cv_cc_pipe=yes, tcl_cv_cc_pipe=no) - CFLAGS=$hold_cflags]) - if test $tcl_cv_cc_pipe = yes; then - CFLAGS="$CFLAGS -pipe" - fi - fi - - #-------------------------------------------------------------------- - # Common compiler flag setup - #-------------------------------------------------------------------- - - AC_C_BIGENDIAN -]) - -#------------------------------------------------------------------------ -# TEA_MAKE_LIB -- -# -# Generate a line that can be used to build a shared/unshared library -# in a platform independent manner. -# -# Arguments: -# none -# -# Requires: -# -# Results: -# -# Defines the following vars: -# CFLAGS - Done late here to note disturb other AC macros -# MAKE_LIB - Command to execute to build the Tcl library; -# differs depending on whether or not Tcl is being -# compiled as a shared library. -# MAKE_SHARED_LIB Makefile rule for building a shared library -# MAKE_STATIC_LIB Makefile rule for building a static library -# MAKE_STUB_LIB Makefile rule for building a stub library -# VC_MANIFEST_EMBED_DLL Makefile rule for embedded VC manifest in DLL -# VC_MANIFEST_EMBED_EXE Makefile rule for embedded VC manifest in EXE -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_MAKE_LIB], [ - if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes"; then - MAKE_STATIC_LIB="\${STLIB_LD} -out:\[$]@ \$(PKG_OBJECTS)" - MAKE_SHARED_LIB="\${SHLIB_LD} \${SHLIB_LD_LIBS} \${LDFLAGS_DEFAULT} -out:\[$]@ \$(PKG_OBJECTS)" - AC_EGREP_CPP([manifest needed], [ -#if defined(_MSC_VER) && _MSC_VER >= 1400 -print("manifest needed") -#endif - ], [ - # Could do a CHECK_PROG for mt, but should always be with MSVC8+ - VC_MANIFEST_EMBED_DLL="if test -f \[$]@.manifest ; then mt.exe -nologo -manifest \[$]@.manifest -outputresource:\[$]@\;2 ; fi" - VC_MANIFEST_EMBED_EXE="if test -f \[$]@.manifest ; then mt.exe -nologo -manifest \[$]@.manifest -outputresource:\[$]@\;1 ; fi" - MAKE_SHARED_LIB="${MAKE_SHARED_LIB} ; ${VC_MANIFEST_EMBED_DLL}" - TEA_ADD_CLEANFILES([*.manifest]) - ]) - MAKE_STUB_LIB="\${STLIB_LD} -nodefaultlib -out:\[$]@ \$(PKG_STUB_OBJECTS)" - else - MAKE_STATIC_LIB="\${STLIB_LD} \[$]@ \$(PKG_OBJECTS)" - MAKE_SHARED_LIB="\${SHLIB_LD} -o \[$]@ \$(PKG_OBJECTS) \${SHLIB_LD_LIBS}" - MAKE_STUB_LIB="\${STLIB_LD} \[$]@ \$(PKG_STUB_OBJECTS)" - fi - - if test "${SHARED_BUILD}" = "1" ; then - MAKE_LIB="${MAKE_SHARED_LIB} " - else - MAKE_LIB="${MAKE_STATIC_LIB} " - fi - - #-------------------------------------------------------------------- - # Shared libraries and static libraries have different names. - # Use the double eval to make sure any variables in the suffix is - # substituted. (@@@ Might not be necessary anymore) - #-------------------------------------------------------------------- - - if test "${TEA_PLATFORM}" = "windows" ; then - if test "${SHARED_BUILD}" = "1" ; then - # We force the unresolved linking of symbols that are really in - # the private libraries of Tcl and Tk. - if test x"${TK_BIN_DIR}" != x ; then - SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TK_BIN_DIR}/${TK_STUB_LIB_FILE}`\"" - fi - SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}`\"" - if test "$GCC" = "yes"; then - SHLIB_LD_LIBS="${SHLIB_LD_LIBS} -static-libgcc" - fi - eval eval "PKG_LIB_FILE=${PACKAGE_LIB_PREFIX}${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" - else - eval eval "PKG_LIB_FILE=${PACKAGE_LIB_PREFIX}${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" - if test "$GCC" = "yes"; then - PKG_LIB_FILE=lib${PKG_LIB_FILE} - fi - fi - # Some packages build their own stubs libraries - eval eval "PKG_STUB_LIB_FILE=${PACKAGE_LIB_PREFIX}${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}" - if test "$GCC" = "yes"; then - PKG_STUB_LIB_FILE=lib${PKG_STUB_LIB_FILE} - fi - # These aren't needed on Windows (either MSVC or gcc) - RANLIB=: - RANLIB_STUB=: - else - RANLIB_STUB="${RANLIB}" - if test "${SHARED_BUILD}" = "1" ; then - SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TCL_STUB_LIB_SPEC}" - if test x"${TK_BIN_DIR}" != x ; then - SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TK_STUB_LIB_SPEC}" - fi - eval eval "PKG_LIB_FILE=lib${PACKAGE_LIB_PREFIX}${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" - RANLIB=: - else - eval eval "PKG_LIB_FILE=lib${PACKAGE_LIB_PREFIX}${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" - fi - # Some packages build their own stubs libraries - eval eval "PKG_STUB_LIB_FILE=lib${PACKAGE_LIB_PREFIX}${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}" - fi - - # These are escaped so that only CFLAGS is picked up at configure time. - # The other values will be substituted at make time. - CFLAGS="${CFLAGS} \${CFLAGS_DEFAULT} \${CFLAGS_WARNING}" - if test "${SHARED_BUILD}" = "1" ; then - CFLAGS="${CFLAGS} \${SHLIB_CFLAGS}" - fi - - AC_SUBST(MAKE_LIB) - AC_SUBST(MAKE_SHARED_LIB) - AC_SUBST(MAKE_STATIC_LIB) - AC_SUBST(MAKE_STUB_LIB) - AC_SUBST(RANLIB_STUB) - AC_SUBST(VC_MANIFEST_EMBED_DLL) - AC_SUBST(VC_MANIFEST_EMBED_EXE) -]) - -#------------------------------------------------------------------------ -# TEA_LIB_SPEC -- -# -# Compute the name of an existing object library located in libdir -# from the given base name and produce the appropriate linker flags. -# -# Arguments: -# basename The base name of the library without version -# numbers, extensions, or "lib" prefixes. -# extra_dir Extra directory in which to search for the -# library. This location is used first, then -# $prefix/$exec-prefix, then some defaults. -# -# Requires: -# TEA_INIT and TEA_PREFIX must be called first. -# -# Results: -# -# Defines the following vars: -# ${basename}_LIB_NAME The computed library name. -# ${basename}_LIB_SPEC The computed linker flags. -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_LIB_SPEC], [ - AC_MSG_CHECKING([for $1 library]) - - # Look in exec-prefix for the library (defined by TEA_PREFIX). - - tea_lib_name_dir="${exec_prefix}/lib" - - # Or in a user-specified location. - - if test x"$2" != x ; then - tea_extra_lib_dir=$2 - else - tea_extra_lib_dir=NONE - fi - - for i in \ - `ls -dr ${tea_extra_lib_dir}/$1[[0-9]]*.lib 2>/dev/null ` \ - `ls -dr ${tea_extra_lib_dir}/lib$1[[0-9]]* 2>/dev/null ` \ - `ls -dr ${tea_lib_name_dir}/$1[[0-9]]*.lib 2>/dev/null ` \ - `ls -dr ${tea_lib_name_dir}/lib$1[[0-9]]* 2>/dev/null ` \ - `ls -dr /usr/lib/$1[[0-9]]*.lib 2>/dev/null ` \ - `ls -dr /usr/lib/lib$1[[0-9]]* 2>/dev/null ` \ - `ls -dr /usr/lib64/$1[[0-9]]*.lib 2>/dev/null ` \ - `ls -dr /usr/lib64/lib$1[[0-9]]* 2>/dev/null ` \ - `ls -dr /usr/local/lib/$1[[0-9]]*.lib 2>/dev/null ` \ - `ls -dr /usr/local/lib/lib$1[[0-9]]* 2>/dev/null ` ; do - if test -f "$i" ; then - tea_lib_name_dir=`dirname $i` - $1_LIB_NAME=`basename $i` - $1_LIB_PATH_NAME=$i - break - fi - done - - if test "${TEA_PLATFORM}" = "windows"; then - $1_LIB_SPEC=\"`${CYGPATH} ${$1_LIB_PATH_NAME} 2>/dev/null`\" - else - # Strip off the leading "lib" and trailing ".a" or ".so" - - tea_lib_name_lib=`echo ${$1_LIB_NAME}|sed -e 's/^lib//' -e 's/\.[[^.]]*$//' -e 's/\.so.*//'` - $1_LIB_SPEC="-L${tea_lib_name_dir} -l${tea_lib_name_lib}" - fi - - if test "x${$1_LIB_NAME}" = x ; then - AC_MSG_ERROR([not found]) - else - AC_MSG_RESULT([${$1_LIB_SPEC}]) - fi -]) - -#------------------------------------------------------------------------ -# TEA_PRIVATE_TCL_HEADERS -- -# -# Locate the private Tcl include files -# -# Arguments: -# -# Requires: -# TCL_SRC_DIR Assumes that TEA_LOAD_TCLCONFIG has -# already been called. -# -# Results: -# -# Substitutes the following vars: -# TCL_TOP_DIR_NATIVE -# TCL_INCLUDES -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_PRIVATE_TCL_HEADERS], [ - # Allow for --with-tclinclude to take effect and define ${ac_cv_c_tclh} - AC_REQUIRE([TEA_PUBLIC_TCL_HEADERS]) - AC_MSG_CHECKING([for Tcl private include files]) - - TCL_SRC_DIR_NATIVE=`${CYGPATH} ${TCL_SRC_DIR}` - TCL_TOP_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}\" - - # Check to see if tclPort.h isn't already with the public headers - # Don't look for tclInt.h because that resides with tcl.h in the core - # sources, but the Port headers are in a different directory - if test "${TEA_PLATFORM}" = "windows" -a \ - -f "${ac_cv_c_tclh}/tclWinPort.h"; then - result="private headers found with public headers" - elif test "${TEA_PLATFORM}" = "unix" -a \ - -f "${ac_cv_c_tclh}/tclUnixPort.h"; then - result="private headers found with public headers" - else - TCL_GENERIC_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/generic\" - if test "${TEA_PLATFORM}" = "windows"; then - TCL_PLATFORM_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/win\" - else - TCL_PLATFORM_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/unix\" - fi - # Overwrite the previous TCL_INCLUDES as this should capture both - # public and private headers in the same set. - # We want to ensure these are substituted so as not to require - # any *_NATIVE vars be defined in the Makefile - TCL_INCLUDES="-I${TCL_GENERIC_DIR_NATIVE} -I${TCL_PLATFORM_DIR_NATIVE}" - if test "`uname -s`" = "Darwin"; then - # If Tcl was built as a framework, attempt to use - # the framework's Headers and PrivateHeaders directories - case ${TCL_DEFS} in - *TCL_FRAMEWORK*) - if test -d "${TCL_BIN_DIR}/Headers" -a \ - -d "${TCL_BIN_DIR}/PrivateHeaders"; then - TCL_INCLUDES="-I\"${TCL_BIN_DIR}/Headers\" -I\"${TCL_BIN_DIR}/PrivateHeaders\" ${TCL_INCLUDES}" - else - TCL_INCLUDES="${TCL_INCLUDES} ${TCL_INCLUDE_SPEC} `echo "${TCL_INCLUDE_SPEC}" | sed -e 's/Headers/PrivateHeaders/'`" - fi - ;; - esac - result="Using ${TCL_INCLUDES}" - else - if test ! -f "${TCL_SRC_DIR}/generic/tclInt.h" ; then - AC_MSG_ERROR([Cannot find private header tclInt.h in ${TCL_SRC_DIR}]) - fi - result="Using srcdir found in tclConfig.sh: ${TCL_SRC_DIR}" - fi - fi - - AC_SUBST(TCL_TOP_DIR_NATIVE) - - AC_SUBST(TCL_INCLUDES) - AC_MSG_RESULT([${result}]) -]) - -#------------------------------------------------------------------------ -# TEA_PUBLIC_TCL_HEADERS -- -# -# Locate the installed public Tcl header files -# -# Arguments: -# None. -# -# Requires: -# CYGPATH must be set -# -# Results: -# -# Adds a --with-tclinclude switch to configure. -# Result is cached. -# -# Substitutes the following vars: -# TCL_INCLUDES -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_PUBLIC_TCL_HEADERS], [ - AC_MSG_CHECKING([for Tcl public headers]) - - AC_ARG_WITH(tclinclude, [ --with-tclinclude directory containing the public Tcl header files], with_tclinclude=${withval}) - - AC_CACHE_VAL(ac_cv_c_tclh, [ - # Use the value from --with-tclinclude, if it was given - - if test x"${with_tclinclude}" != x ; then - if test -f "${with_tclinclude}/tcl.h" ; then - ac_cv_c_tclh=${with_tclinclude} - else - AC_MSG_ERROR([${with_tclinclude} directory does not contain tcl.h]) - fi - else - list="" - if test "`uname -s`" = "Darwin"; then - # If Tcl was built as a framework, attempt to use - # the framework's Headers directory - case ${TCL_DEFS} in - *TCL_FRAMEWORK*) - list="`ls -d ${TCL_BIN_DIR}/Headers 2>/dev/null`" - ;; - esac - fi - - # Look in the source dir only if Tcl is not installed, - # and in that situation, look there before installed locations. - if test -f "${TCL_BIN_DIR}/Makefile" ; then - list="$list `ls -d ${TCL_SRC_DIR}/generic 2>/dev/null`" - fi - - # Check order: pkg --prefix location, Tcl's --prefix location, - # relative to directory of tclConfig.sh. - - eval "temp_includedir=${includedir}" - list="$list \ - `ls -d ${temp_includedir} 2>/dev/null` \ - `ls -d ${TCL_PREFIX}/include 2>/dev/null` \ - `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null`" - if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then - list="$list /usr/local/include /usr/include" - if test x"${TCL_INCLUDE_SPEC}" != x ; then - d=`echo "${TCL_INCLUDE_SPEC}" | sed -e 's/^-I//'` - list="$list `ls -d ${d} 2>/dev/null`" - fi - fi - for i in $list ; do - if test -f "$i/tcl.h" ; then - ac_cv_c_tclh=$i - break - fi - done - fi - ]) - - # Print a message based on how we determined the include path - - if test x"${ac_cv_c_tclh}" = x ; then - AC_MSG_ERROR([tcl.h not found. Please specify its location with --with-tclinclude]) - else - AC_MSG_RESULT([${ac_cv_c_tclh}]) - fi - - # Convert to a native path and substitute into the output files. - - INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tclh}` - - TCL_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" - - AC_SUBST(TCL_INCLUDES) -]) - -#------------------------------------------------------------------------ -# TEA_PRIVATE_TK_HEADERS -- -# -# Locate the private Tk include files -# -# Arguments: -# -# Requires: -# TK_SRC_DIR Assumes that TEA_LOAD_TKCONFIG has -# already been called. -# -# Results: -# -# Substitutes the following vars: -# TK_INCLUDES -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_PRIVATE_TK_HEADERS], [ - # Allow for --with-tkinclude to take effect and define ${ac_cv_c_tkh} - AC_REQUIRE([TEA_PUBLIC_TK_HEADERS]) - AC_MSG_CHECKING([for Tk private include files]) - - TK_SRC_DIR_NATIVE=`${CYGPATH} ${TK_SRC_DIR}` - TK_TOP_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}\" - - # Check to see if tkPort.h isn't already with the public headers - # Don't look for tkInt.h because that resides with tk.h in the core - # sources, but the Port headers are in a different directory - if test "${TEA_PLATFORM}" = "windows" -a \ - -f "${ac_cv_c_tkh}/tkWinPort.h"; then - result="private headers found with public headers" - elif test "${TEA_PLATFORM}" = "unix" -a \ - -f "${ac_cv_c_tkh}/tkUnixPort.h"; then - result="private headers found with public headers" - else - TK_GENERIC_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/generic\" - TK_XLIB_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/xlib\" - if test "${TEA_PLATFORM}" = "windows"; then - TK_PLATFORM_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/win\" - else - TK_PLATFORM_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/unix\" - fi - # Overwrite the previous TK_INCLUDES as this should capture both - # public and private headers in the same set. - # We want to ensure these are substituted so as not to require - # any *_NATIVE vars be defined in the Makefile - TK_INCLUDES="-I${TK_GENERIC_DIR_NATIVE} -I${TK_PLATFORM_DIR_NATIVE}" - # Detect and add ttk subdir - if test -d "${TK_SRC_DIR}/generic/ttk"; then - TK_INCLUDES="${TK_INCLUDES} -I\"${TK_SRC_DIR_NATIVE}/generic/ttk\"" - fi - if test "${TEA_WINDOWINGSYSTEM}" != "x11"; then - TK_INCLUDES="${TK_INCLUDES} -I\"${TK_XLIB_DIR_NATIVE}\"" - fi - if test "${TEA_WINDOWINGSYSTEM}" = "aqua"; then - TK_INCLUDES="${TK_INCLUDES} -I\"${TK_SRC_DIR_NATIVE}/macosx\"" - fi - if test "`uname -s`" = "Darwin"; then - # If Tk was built as a framework, attempt to use - # the framework's Headers and PrivateHeaders directories - case ${TK_DEFS} in - *TK_FRAMEWORK*) - if test -d "${TK_BIN_DIR}/Headers" -a \ - -d "${TK_BIN_DIR}/PrivateHeaders"; then - TK_INCLUDES="-I\"${TK_BIN_DIR}/Headers\" -I\"${TK_BIN_DIR}/PrivateHeaders\" ${TK_INCLUDES}" - else - TK_INCLUDES="${TK_INCLUDES} ${TK_INCLUDE_SPEC} `echo "${TK_INCLUDE_SPEC}" | sed -e 's/Headers/PrivateHeaders/'`" - fi - ;; - esac - result="Using ${TK_INCLUDES}" - else - if test ! -f "${TK_SRC_DIR}/generic/tkInt.h" ; then - AC_MSG_ERROR([Cannot find private header tkInt.h in ${TK_SRC_DIR}]) - fi - result="Using srcdir found in tkConfig.sh: ${TK_SRC_DIR}" - fi - fi - - AC_SUBST(TK_TOP_DIR_NATIVE) - AC_SUBST(TK_XLIB_DIR_NATIVE) - - AC_SUBST(TK_INCLUDES) - AC_MSG_RESULT([${result}]) -]) - -#------------------------------------------------------------------------ -# TEA_PUBLIC_TK_HEADERS -- -# -# Locate the installed public Tk header files -# -# Arguments: -# None. -# -# Requires: -# CYGPATH must be set -# -# Results: -# -# Adds a --with-tkinclude switch to configure. -# Result is cached. -# -# Substitutes the following vars: -# TK_INCLUDES -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_PUBLIC_TK_HEADERS], [ - AC_MSG_CHECKING([for Tk public headers]) - - AC_ARG_WITH(tkinclude, [ --with-tkinclude directory containing the public Tk header files], with_tkinclude=${withval}) - - AC_CACHE_VAL(ac_cv_c_tkh, [ - # Use the value from --with-tkinclude, if it was given - - if test x"${with_tkinclude}" != x ; then - if test -f "${with_tkinclude}/tk.h" ; then - ac_cv_c_tkh=${with_tkinclude} - else - AC_MSG_ERROR([${with_tkinclude} directory does not contain tk.h]) - fi - else - list="" - if test "`uname -s`" = "Darwin"; then - # If Tk was built as a framework, attempt to use - # the framework's Headers directory. - case ${TK_DEFS} in - *TK_FRAMEWORK*) - list="`ls -d ${TK_BIN_DIR}/Headers 2>/dev/null`" - ;; - esac - fi - - # Look in the source dir only if Tk is not installed, - # and in that situation, look there before installed locations. - if test -f "${TK_BIN_DIR}/Makefile" ; then - list="$list `ls -d ${TK_SRC_DIR}/generic 2>/dev/null`" - fi - - # Check order: pkg --prefix location, Tk's --prefix location, - # relative to directory of tkConfig.sh, Tcl's --prefix location, - # relative to directory of tclConfig.sh. - - eval "temp_includedir=${includedir}" - list="$list \ - `ls -d ${temp_includedir} 2>/dev/null` \ - `ls -d ${TK_PREFIX}/include 2>/dev/null` \ - `ls -d ${TK_BIN_DIR}/../include 2>/dev/null` \ - `ls -d ${TCL_PREFIX}/include 2>/dev/null` \ - `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null`" - if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then - list="$list /usr/local/include /usr/include" - if test x"${TK_INCLUDE_SPEC}" != x ; then - d=`echo "${TK_INCLUDE_SPEC}" | sed -e 's/^-I//'` - list="$list `ls -d ${d} 2>/dev/null`" - fi - fi - for i in $list ; do - if test -f "$i/tk.h" ; then - ac_cv_c_tkh=$i - break - fi - done - fi - ]) - - # Print a message based on how we determined the include path - - if test x"${ac_cv_c_tkh}" = x ; then - AC_MSG_ERROR([tk.h not found. Please specify its location with --with-tkinclude]) - else - AC_MSG_RESULT([${ac_cv_c_tkh}]) - fi - - # Convert to a native path and substitute into the output files. - - INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tkh}` - - TK_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" - - AC_SUBST(TK_INCLUDES) - - if test "${TEA_WINDOWINGSYSTEM}" != "x11"; then - # On Windows and Aqua, we need the X compat headers - AC_MSG_CHECKING([for X11 header files]) - if test ! -r "${INCLUDE_DIR_NATIVE}/X11/Xlib.h"; then - INCLUDE_DIR_NATIVE="`${CYGPATH} ${TK_SRC_DIR}/xlib`" - TK_XINCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" - AC_SUBST(TK_XINCLUDES) - fi - AC_MSG_RESULT([${INCLUDE_DIR_NATIVE}]) - fi -]) - -#------------------------------------------------------------------------ -# TEA_PATH_CONFIG -- -# -# Locate the ${1}Config.sh file and perform a sanity check on -# the ${1} compile flags. These are used by packages like -# [incr Tk] that load *Config.sh files from more than Tcl and Tk. -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --with-$1=... -# -# Defines the following vars: -# $1_BIN_DIR Full path to the directory containing -# the $1Config.sh file -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_PATH_CONFIG], [ - # - # Ok, lets find the $1 configuration - # First, look for one uninstalled. - # the alternative search directory is invoked by --with-$1 - # - - if test x"${no_$1}" = x ; then - # we reset no_$1 in case something fails here - no_$1=true - AC_ARG_WITH($1, [ --with-$1 directory containing $1 configuration ($1Config.sh)], with_$1config=${withval}) - AC_MSG_CHECKING([for $1 configuration]) - AC_CACHE_VAL(ac_cv_c_$1config,[ - - # First check to see if --with-$1 was specified. - if test x"${with_$1config}" != x ; then - case ${with_$1config} in - */$1Config.sh ) - if test -f ${with_$1config}; then - AC_MSG_WARN([--with-$1 argument should refer to directory containing $1Config.sh, not to $1Config.sh itself]) - with_$1config=`echo ${with_$1config} | sed 's!/$1Config\.sh$!!'` - fi;; - esac - if test -f "${with_$1config}/$1Config.sh" ; then - ac_cv_c_$1config=`(cd ${with_$1config}; pwd)` - else - AC_MSG_ERROR([${with_$1config} directory doesn't contain $1Config.sh]) - fi - fi - - # then check for a private $1 installation - if test x"${ac_cv_c_$1config}" = x ; then - for i in \ - ../$1 \ - `ls -dr ../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ - `ls -dr ../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ - `ls -dr ../$1*[[0-9]].[[0-9]] 2>/dev/null` \ - `ls -dr ../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ - ../../$1 \ - `ls -dr ../../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ - `ls -dr ../../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ - `ls -dr ../../$1*[[0-9]].[[0-9]] 2>/dev/null` \ - `ls -dr ../../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ - ../../../$1 \ - `ls -dr ../../../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ - `ls -dr ../../../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ - `ls -dr ../../../$1*[[0-9]].[[0-9]] 2>/dev/null` \ - `ls -dr ../../../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ - ${srcdir}/../$1 \ - `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ - `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ - `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]] 2>/dev/null` \ - `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ - ; do - if test -f "$i/$1Config.sh" ; then - ac_cv_c_$1config=`(cd $i; pwd)` - break - fi - if test -f "$i/unix/$1Config.sh" ; then - ac_cv_c_$1config=`(cd $i/unix; pwd)` - break - fi - done - fi - - # check in a few common install locations - if test x"${ac_cv_c_$1config}" = x ; then - for i in `ls -d ${libdir} 2>/dev/null` \ - `ls -d ${exec_prefix}/lib 2>/dev/null` \ - `ls -d ${prefix}/lib 2>/dev/null` \ - `ls -d /usr/local/lib 2>/dev/null` \ - `ls -d /usr/contrib/lib 2>/dev/null` \ - `ls -d /usr/pkg/lib 2>/dev/null` \ - `ls -d /usr/lib 2>/dev/null` \ - `ls -d /usr/lib64 2>/dev/null` \ - ; do - if test -f "$i/$1Config.sh" ; then - ac_cv_c_$1config=`(cd $i; pwd)` - break - fi - done - fi - ]) - - if test x"${ac_cv_c_$1config}" = x ; then - $1_BIN_DIR="# no $1 configs found" - AC_MSG_WARN([Cannot find $1 configuration definitions]) - exit 0 - else - no_$1= - $1_BIN_DIR=${ac_cv_c_$1config} - AC_MSG_RESULT([found $$1_BIN_DIR/$1Config.sh]) - fi - fi -]) - -#------------------------------------------------------------------------ -# TEA_LOAD_CONFIG -- -# -# Load the $1Config.sh file -# -# Arguments: -# -# Requires the following vars to be set: -# $1_BIN_DIR -# -# Results: -# -# Substitutes the following vars: -# $1_SRC_DIR -# $1_LIB_FILE -# $1_LIB_SPEC -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_LOAD_CONFIG], [ - AC_MSG_CHECKING([for existence of ${$1_BIN_DIR}/$1Config.sh]) - - if test -f "${$1_BIN_DIR}/$1Config.sh" ; then - AC_MSG_RESULT([loading]) - . "${$1_BIN_DIR}/$1Config.sh" - else - AC_MSG_RESULT([file not found]) - fi - - # - # If the $1_BIN_DIR is the build directory (not the install directory), - # then set the common variable name to the value of the build variables. - # For example, the variable $1_LIB_SPEC will be set to the value - # of $1_BUILD_LIB_SPEC. An extension should make use of $1_LIB_SPEC - # instead of $1_BUILD_LIB_SPEC since it will work with both an - # installed and uninstalled version of Tcl. - # - - if test -f "${$1_BIN_DIR}/Makefile" ; then - AC_MSG_WARN([Found Makefile - using build library specs for $1]) - $1_LIB_SPEC=${$1_BUILD_LIB_SPEC} - $1_STUB_LIB_SPEC=${$1_BUILD_STUB_LIB_SPEC} - $1_STUB_LIB_PATH=${$1_BUILD_STUB_LIB_PATH} - $1_INCLUDE_SPEC=${$1_BUILD_INCLUDE_SPEC} - $1_LIBRARY_PATH=${$1_LIBRARY_PATH} - fi - - AC_SUBST($1_VERSION) - AC_SUBST($1_BIN_DIR) - AC_SUBST($1_SRC_DIR) - - AC_SUBST($1_LIB_FILE) - AC_SUBST($1_LIB_SPEC) - - AC_SUBST($1_STUB_LIB_FILE) - AC_SUBST($1_STUB_LIB_SPEC) - AC_SUBST($1_STUB_LIB_PATH) - - # Allow the caller to prevent this auto-check by specifying any 2nd arg - AS_IF([test "x$2" = x], [ - # Check both upper and lower-case variants - # If a dev wanted non-stubs libs, this function could take an option - # to not use _STUB in the paths below - AS_IF([test "x${$1_STUB_LIB_SPEC}" = x], - [TEA_LOAD_CONFIG_LIB(translit($1,[a-z],[A-Z])_STUB)], - [TEA_LOAD_CONFIG_LIB($1_STUB)]) - ]) -]) - -#------------------------------------------------------------------------ -# TEA_LOAD_CONFIG_LIB -- -# -# Helper function to load correct library from another extension's -# ${PACKAGE}Config.sh. -# -# Results: -# Adds to LIBS the appropriate extension library -#------------------------------------------------------------------------ -AC_DEFUN([TEA_LOAD_CONFIG_LIB], [ - AC_MSG_CHECKING([For $1 library for LIBS]) - # This simplifies the use of stub libraries by automatically adding - # the stub lib to your path. Normally this would add to SHLIB_LD_LIBS, - # but this is called before CONFIG_CFLAGS. More importantly, this adds - # to PKG_LIBS, which becomes LIBS, and that is only used by SHLIB_LD. - if test "x${$1_LIB_SPEC}" != "x" ; then - if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes" ; then - TEA_ADD_LIBS([\"`${CYGPATH} ${$1_LIB_PATH}`\"]) - AC_MSG_RESULT([using $1_LIB_PATH ${$1_LIB_PATH}]) - else - TEA_ADD_LIBS([${$1_LIB_SPEC}]) - AC_MSG_RESULT([using $1_LIB_SPEC ${$1_LIB_SPEC}]) - fi - else - AC_MSG_RESULT([file not found]) - fi -]) - -#------------------------------------------------------------------------ -# TEA_EXPORT_CONFIG -- -# -# Define the data to insert into the ${PACKAGE}Config.sh file -# -# Arguments: -# -# Requires the following vars to be set: -# $1 -# -# Results: -# Substitutes the following vars: -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_EXPORT_CONFIG], [ - #-------------------------------------------------------------------- - # These are for $1Config.sh - #-------------------------------------------------------------------- - - # pkglibdir must be a fully qualified path and (not ${exec_prefix}/lib) - eval pkglibdir="[$]{libdir}/$1${PACKAGE_VERSION}" - if test "${TCL_LIB_VERSIONS_OK}" = "ok"; then - eval $1_LIB_FLAG="-l$1${PACKAGE_VERSION}${DBGX}" - eval $1_STUB_LIB_FLAG="-l$1stub${PACKAGE_VERSION}${DBGX}" - else - eval $1_LIB_FLAG="-l$1`echo ${PACKAGE_VERSION} | tr -d .`${DBGX}" - eval $1_STUB_LIB_FLAG="-l$1stub`echo ${PACKAGE_VERSION} | tr -d .`${DBGX}" - fi - $1_BUILD_LIB_SPEC="-L`$CYGPATH $(pwd)` ${$1_LIB_FLAG}" - $1_LIB_SPEC="-L`$CYGPATH ${pkglibdir}` ${$1_LIB_FLAG}" - $1_BUILD_STUB_LIB_SPEC="-L`$CYGPATH $(pwd)` [$]{$1_STUB_LIB_FLAG}" - $1_STUB_LIB_SPEC="-L`$CYGPATH ${pkglibdir}` [$]{$1_STUB_LIB_FLAG}" - $1_BUILD_STUB_LIB_PATH="`$CYGPATH $(pwd)`/[$]{PKG_STUB_LIB_FILE}" - $1_STUB_LIB_PATH="`$CYGPATH ${pkglibdir}`/[$]{PKG_STUB_LIB_FILE}" - - AC_SUBST($1_BUILD_LIB_SPEC) - AC_SUBST($1_LIB_SPEC) - AC_SUBST($1_BUILD_STUB_LIB_SPEC) - AC_SUBST($1_STUB_LIB_SPEC) - AC_SUBST($1_BUILD_STUB_LIB_PATH) - AC_SUBST($1_STUB_LIB_PATH) - - AC_SUBST(MAJOR_VERSION) - AC_SUBST(MINOR_VERSION) - AC_SUBST(PATCHLEVEL) -]) - - -#------------------------------------------------------------------------ -# TEA_PATH_CELIB -- -# -# Locate Keuchel's celib emulation layer for targeting Win/CE -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --with-celib=... -# -# Defines the following vars: -# CELIB_DIR Full path to the directory containing -# the include and platform lib files -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_PATH_CELIB], [ - # First, look for one uninstalled. - # the alternative search directory is invoked by --with-celib - - if test x"${no_celib}" = x ; then - # we reset no_celib in case something fails here - no_celib=true - AC_ARG_WITH(celib,[ --with-celib=DIR use Windows/CE support library from DIR], with_celibconfig=${withval}) - AC_MSG_CHECKING([for Windows/CE celib directory]) - AC_CACHE_VAL(ac_cv_c_celibconfig,[ - # First check to see if --with-celibconfig was specified. - if test x"${with_celibconfig}" != x ; then - if test -d "${with_celibconfig}/inc" ; then - ac_cv_c_celibconfig=`(cd ${with_celibconfig}; pwd)` - else - AC_MSG_ERROR([${with_celibconfig} directory doesn't contain inc directory]) - fi - fi - - # then check for a celib library - if test x"${ac_cv_c_celibconfig}" = x ; then - for i in \ - ../celib-palm-3.0 \ - ../celib \ - ../../celib-palm-3.0 \ - ../../celib \ - `ls -dr ../celib-*3.[[0-9]]* 2>/dev/null` \ - ${srcdir}/../celib-palm-3.0 \ - ${srcdir}/../celib \ - `ls -dr ${srcdir}/../celib-*3.[[0-9]]* 2>/dev/null` \ - ; do - if test -d "$i/inc" ; then - ac_cv_c_celibconfig=`(cd $i; pwd)` - break - fi - done - fi - ]) - if test x"${ac_cv_c_celibconfig}" = x ; then - AC_MSG_ERROR([Cannot find celib support library directory]) - else - no_celib= - CELIB_DIR=${ac_cv_c_celibconfig} - CELIB_DIR=`echo "$CELIB_DIR" | sed -e 's!\\\!/!g'` - AC_MSG_RESULT([found $CELIB_DIR]) - fi - fi -]) - -#------------------------------------------------------------------------ -# TEA_INSTALLER -- -# -# Configure the installer. -# -# Arguments: -# none -# -# Results: -# Substitutes the following vars: -# INSTALL -# INSTALL_DATA_DIR -# INSTALL_DATA -# INSTALL_PROGRAM -# INSTALL_SCRIPT -# INSTALL_LIBRARY -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_INSTALLER], [ - INSTALL='$(SHELL) $(srcdir)/tclconfig/install-sh -c' - INSTALL_DATA_DIR='${INSTALL} -d -m 755' - INSTALL_DATA='${INSTALL} -m 644' - INSTALL_PROGRAM='${INSTALL} -m 755' - INSTALL_SCRIPT='${INSTALL} -m 755' - - TEA_CONFIG_SYSTEM - case $system in - HP-UX-*) INSTALL_LIBRARY='${INSTALL} -m 755' ;; - *) INSTALL_LIBRARY='${INSTALL} -m 644' ;; - esac - - AC_SUBST(INSTALL) - AC_SUBST(INSTALL_DATA_DIR) - AC_SUBST(INSTALL_DATA) - AC_SUBST(INSTALL_PROGRAM) - AC_SUBST(INSTALL_SCRIPT) - AC_SUBST(INSTALL_LIBRARY) -]) - -### -# Tip 430 - ZipFS Modifications -### -#------------------------------------------------------------------------ -# SC_ZIPFS_SUPPORT -# Locate a zip encoder installed on the system path, or none. -# -# Arguments: -# none -# -# Results: -# Substitutes the following vars: -# TCL_ZIP_FILE -# TCL_ZIPFS_SUPPORT -# TCL_ZIPFS_FLAG -# ZIP_PROG -#------------------------------------------------------------------------ - -#------------------------------------------------------------------------ -# SC_PROG_ZIP -# Locate a zip encoder installed on the system path, or none. -# -# Arguments: -# none -# -# Results: -# Substitutes the following vars: -# ZIP_PROG -# ZIP_PROG_OPTIONS -# ZIP_PROG_VFSSEARCH -# ZIP_INSTALL_OBJS -#------------------------------------------------------------------------ -AC_DEFUN([TEA_ZIPFS_SUPPORT], [ - AC_MSG_CHECKING([for zipfs support]) - ZIP_PROG="" - ZIP_PROG_OPTIONS="" - ZIP_PROG_VFSSEARCH="" - INSTALL_MSGS="" - # If our native tclsh processes the "install" command line option - # we can use it to mint zip files - AS_IF([$TCLSH_PROG install],[ - ZIP_PROG=${TCLSH_PROG} - ZIP_PROG_OPTIONS="install mkzip" - ZIP_PROG_VFSSEARCH="." - AC_MSG_RESULT([Can use Native Tclsh for Zip encoding]) - ]) - if test "x$ZIP_PROG" = "x" ; then - AC_CACHE_VAL(ac_cv_path_zip, [ - search_path=`echo ${PATH} | sed -e 's/:/ /g'` - for dir in $search_path ; do - for j in `ls -r $dir/zip 2> /dev/null` \ - `ls -r $dir/zip 2> /dev/null` ; do - if test x"$ac_cv_path_zip" = x ; then - if test -f "$j" ; then - ac_cv_path_zip=$j - break - fi - fi - done - done - ]) - if test -f "$ac_cv_path_zip" ; then - ZIP_PROG="$ac_cv_path_zip " - AC_MSG_RESULT([$ZIP_PROG]) - ZIP_PROG_OPTIONS="-rq" - ZIP_PROG_VFSSEARCH="." - AC_MSG_RESULT([Found INFO Zip in environment]) - # Use standard arguments for zip - fi - fi - if test "x$ZIP_PROG" = "x" ; then - # It is not an error if an installed version of Zip can't be located. - ZIP_PROG="" - ZIP_PROG_OPTIONS="" - ZIP_PROG_VFSSEARCH="" - TCL_ZIPFS_SUPPORT=0 - TCL_ZIPFS_FLAG= - else - # ZIPFS Support - eval "TCL_ZIP_FILE=\"${TCL_ZIP_FILE}\"" - if test ${TCL_ZIP_FILE} = "" ; then - TCL_ZIPFS_SUPPORT=0 - TCL_ZIPFS_FLAG= - INSTALL_LIBRARIES=install-libraries - INSTALL_MSGS=install-msgs - else - if test ${SHARED_BUILD} = 1 ; then - TCL_ZIPFS_SUPPORT=1 - INSTALL_LIBRARIES=install-libraries-zipfs-shared - else - TCL_ZIPFS_SUPPORT=2 - INSTALL_LIBRARIES=install-libraries-zipfs-static - fi - TCL_ZIPFS_FLAG=-DTCL_ZIPFS_SUPPORT - fi - fi - - AC_SUBST(TCL_ZIP_FILE) - AC_SUBST(TCL_ZIPFS_SUPPORT) - AC_SUBST(TCL_ZIPFS_FLAG) - AC_SUBST(ZIP_PROG) - AC_SUBST(ZIP_PROG_OPTIONS) - AC_SUBST(ZIP_PROG_VFSSEARCH) - AC_SUBST(INSTALL_LIBRARIES) - AC_SUBST(INSTALL_MSGS) -]) - -# Local Variables: -# mode: autoconf -# End: diff --git a/tls/tests/all.tcl b/tls/tests/all.tcl deleted file mode 100644 index aeb37a8..0000000 --- a/tls/tests/all.tcl +++ /dev/null @@ -1,56 +0,0 @@ -# all.tcl -- -# -# This file contains a top-level script to run all of the Tcl -# tests. Execute it by invoking "source all.test" when running tcltest -# in this directory. -# -# Copyright (c) 1998-2000 by Ajuba Solutions. -# All rights reserved. -# -# RCS: @(#) $Id: all.tcl,v 1.5 2000/08/15 18:45:01 hobbs Exp $ - -if {[lsearch [namespace children] ::tcltest] == -1} { - package require tcltest - namespace import ::tcltest::* -} - -set ::tcltest::testSingleFile false -set ::tcltest::testsDirectory [file dir [info script]] - -# We should ensure that the testsDirectory is absolute. -# This was introduced in Tcl 8.3+'s tcltest, so we need a catch. -catch {::tcltest::normalizePath ::tcltest::testsDirectory} - -puts stdout "Tests running in interp: [info nameofexecutable]" -puts stdout "Tests running in working dir: $::tcltest::testsDirectory" -if {[llength $::tcltest::skip] > 0} { - puts stdout "Skipping tests that match: $::tcltest::skip" -} -if {[llength $::tcltest::match] > 0} { - puts stdout "Only running tests that match: $::tcltest::match" -} - -if {[llength $::tcltest::skipFiles] > 0} { - puts stdout "Skipping test files that match: $::tcltest::skipFiles" -} -if {[llength $::tcltest::matchFiles] > 0} { - puts stdout "Only sourcing test files that match: $::tcltest::matchFiles" -} - -set timeCmd {clock format [clock seconds]} -puts stdout "Tests began at [eval $timeCmd]" - -# source each of the specified tests -foreach file [lsort [::tcltest::getMatchingFiles]] { - set tail [file tail $file] - puts stdout $tail - if {[catch {source $file} msg]} { - puts stdout $msg - } -} - -# cleanup -puts stdout "\nTests ended at [eval $timeCmd]" -::tcltest::cleanupTests 1 -return - diff --git a/tls/tests/certs/README.txt b/tls/tests/certs/README.txt deleted file mode 100644 index 74beaa9..0000000 --- a/tls/tests/certs/README.txt +++ /dev/null @@ -1,9 +0,0 @@ -These files were generated with openssl v0.9.6a-engine based on the -instructions at http://www-itg.lbl.gov/~boverhof/openssl_certs.html. -The file names match the examples used above. - -The PEM password is 'sample' with the basic CA info being: - -subject=/C=CA/ST=British Columbia/L=Vancouver/O=Sample Certs Intl - -These are for testing use only. diff --git a/tls/tests/certs/ca.pem b/tls/tests/certs/ca.pem deleted file mode 100644 index b64683d..0000000 --- a/tls/tests/certs/ca.pem +++ /dev/null @@ -1,18 +0,0 @@ ------BEGIN CERTIFICATE----- -MIIC2jCCAkOgAwIBAgIBADANBgkqhkiG9w0BAQQFADBYMQswCQYDVQQGEwJDQTEZ -MBcGA1UECBMQQnJpdGlzaCBDb2x1bWJpYTESMBAGA1UEBxMJVmFuY291dmVyMRow -GAYDVQQKExFTYW1wbGUgQ2VydHMgSW50bDAeFw0wMTA2MjEyMDI2MDRaFw0wMTA3 -MjEyMDI2MDRaMFgxCzAJBgNVBAYTAkNBMRkwFwYDVQQIExBCcml0aXNoIENvbHVt -YmlhMRIwEAYDVQQHEwlWYW5jb3V2ZXIxGjAYBgNVBAoTEVNhbXBsZSBDZXJ0cyBJ -bnRsMIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDJeHe1yfuw7YCx6nZ4hcyl -qe1JgOXSMqAzHwfHf/EdGtQUhsfsmgx9cZCKgtuZaoRKidl60MFeW2zq12ORuPUB -w90mQh46KDPRNWm1jViI/xmKUY+so6F5P/c6aA0QYqcpDhM7GgMvaAbEuY70gQ0l -uhxMv75mKMWC4RuzFyVVjwIDAQABo4GzMIGwMB0GA1UdDgQWBBTwwtcIvZ/wpImV -VC/e3C/I9qXWVTCBgAYDVR0jBHkwd4AU8MLXCL2f8KSJlVQv3twvyPal1lWhXKRa -MFgxCzAJBgNVBAYTAkNBMRkwFwYDVQQIExBCcml0aXNoIENvbHVtYmlhMRIwEAYD -VQQHEwlWYW5jb3V2ZXIxGjAYBgNVBAoTEVNhbXBsZSBDZXJ0cyBJbnRsggEAMAwG -A1UdEwQFMAMBAf8wDQYJKoZIhvcNAQEEBQADgYEANprDWDEI9/UUkIL4kxvK8Woy -akWYabFR3s2RnxwCMDi0d7eKh+8k+NHLjD1FnWt9VNmub3sd8+PdTMk41PlLfroG -lCAd31HnYqoi498ivgpczwFj3BQSssmhld+aCFyE83KVIeMuP55fcp44vxQuEmcn -EWnH66cMUxI1D3jcQWE= ------END CERTIFICATE----- diff --git a/tls/tests/certs/client.key b/tls/tests/certs/client.key deleted file mode 100644 index 6c27df7..0000000 --- a/tls/tests/certs/client.key +++ /dev/null @@ -1,15 +0,0 @@ ------BEGIN RSA PRIVATE KEY----- -MIICXgIBAAKBgQDByy+QiN7Gde+Pf6Wvjk4OZlXfbV68mzmLh/xrXIdGQL5KqRhi -ydUZSUU87TZ/poZAFGA8kds0pmD1TWy4lGiJjoU5pxeIvl8d08Sqbh6Srxv1CKJm -J7RIp4RvEpviOSaDUC0wkLMvAAaAu2ZpNEncsotV4eSaE/WhvCHamBjpSwIDAQAB -AoGAP0q48h+Bgpep8dfiqP91BsbtbNcvhbG8jZGQIxBJLeyfOYsYZ8s7SdLgRhHD -JtWgKvV8qMuKKBvetr7erznpGdHcDDw1wutL2PagET756BjAtxcZ0lEx129eXThH -10+09QEbSlO9XRd1OvAdLCb80H97+jZXMVJ6eb/uMuVzUMECQQDzikOjJLK678fa -haesVYBqmsFAihGIUK+7Ki1F8wS6/oKLHWKDdFYoI/3Zve0qdFGFdvZicFqLAjKl -QOXxBGrpAkEAy7Vf1nmp8FAj2p1/0383EuIhjmMjQw2SHYMbTaCwbnYGJrPoeMwE -dwaaWwfgmXFeoc6lzBRUeDVz2EE6EyzqEwJBAO9XR4eSrlAHDFsWlSVJVg3ujtO1 -nOthmIKRPbML1O9M5tB/DWzxLSb/0B9ohyb8740Bz7wIfQM2Ir3DXPeThtkCQQDH -zSYrHznnUzNXgZOWxfgmtVVkayhy5CSkfauSAEIMlgaCf4NMuA7JD9jl4FwTJHdF -DYLhIC+ZmBP/0Do+BJexAkEAjrF928xMKcsrVmr7zlEhl+4B75kDkXm8TDV42PQI -WzmYuHZHwWZApU42VVlWEToIog2s0RVBOyHdiQsNwrL6Rw== ------END RSA PRIVATE KEY----- diff --git a/tls/tests/certs/client.pem b/tls/tests/certs/client.pem deleted file mode 100644 index 4dcafe4..0000000 --- a/tls/tests/certs/client.pem +++ /dev/null @@ -1,14 +0,0 @@ ------BEGIN CERTIFICATE----- -MIICHzCCAYgCAQEwDQYJKoZIhvcNAQEEBQAwWDELMAkGA1UEBhMCQ0ExGTAXBgNV -BAgTEEJyaXRpc2ggQ29sdW1iaWExEjAQBgNVBAcTCVZhbmNvdXZlcjEaMBgGA1UE -ChMRU2FtcGxlIENlcnRzIEludGwwHhcNMDEwNjIxMjAyOTU4WhcNMDEwNzIxMjAy -OTU4WjBYMQswCQYDVQQGEwJDQTEZMBcGA1UECBMQQnJpdGlzaCBDb2x1bWJpYTES -MBAGA1UEBxMJVmFuY291dmVyMRowGAYDVQQKExFTYW1wbGUgQ2VydHMgSW50bDCB -nzANBgkqhkiG9w0BAQEFAAOBjQAwgYkCgYEAwcsvkIjexnXvj3+lr45ODmZV321e -vJs5i4f8a1yHRkC+SqkYYsnVGUlFPO02f6aGQBRgPJHbNKZg9U1suJRoiY6FOacX -iL5fHdPEqm4ekq8b9QiiZie0SKeEbxKb4jkmg1AtMJCzLwAGgLtmaTRJ3LKLVeHk -mhP1obwh2pgY6UsCAwEAATANBgkqhkiG9w0BAQQFAAOBgQC9llXASadBxwkaEIZ7 -bmCYMWIB6+jjxa0YCY2jYgqCslny/bkLgIuxIcxf83ouFfXU52r/mq04jfuRfyRt -zCT8C+Z9nhKHdHA0cVYJ+tNuZfssQ+cFHUfjDOsCEFTJ1OoooafnIHpPXub1FcYr -SCLdcK0BwPbCcJUZrIHwu3Nu7g== ------END CERTIFICATE----- diff --git a/tls/tests/certs/client.req b/tls/tests/certs/client.req deleted file mode 100644 index 2bdc56e..0000000 --- a/tls/tests/certs/client.req +++ /dev/null @@ -1,11 +0,0 @@ ------BEGIN CERTIFICATE REQUEST----- -MIIBmDCCAQECAQAwWDELMAkGA1UEBhMCQ0ExGTAXBgNVBAgTEEJyaXRpc2ggQ29s -dW1iaWExEjAQBgNVBAcTCVZhbmNvdXZlcjEaMBgGA1UEChMRU2FtcGxlIENlcnRz -IEludGwwgZ8wDQYJKoZIhvcNAQEBBQADgY0AMIGJAoGBAMHLL5CI3sZ1749/pa+O -Tg5mVd9tXrybOYuH/Gtch0ZAvkqpGGLJ1RlJRTztNn+mhkAUYDyR2zSmYPVNbLiU -aImOhTmnF4i+Xx3TxKpuHpKvG/UIomYntEinhG8Sm+I5JoNQLTCQsy8ABoC7Zmk0 -Sdyyi1Xh5JoT9aG8IdqYGOlLAgMBAAGgADANBgkqhkiG9w0BAQQFAAOBgQB8xq+d -On5JqJBZcc9rW70jmSU7AlSZ48UQlmNmlUSj4YznWUCbDawEfHWv0Xpfho+bio+L -hFuzt0WsotTW1sboFpG3csHyCpGmIxw5Lacv2x5+dDx0jRbyI426+CUn+ZPv5pv8 -iiVrlyiX2P3jifQjhv39Kgbs5cOr/Ic8KKz5rg== ------END CERTIFICATE REQUEST----- diff --git a/tls/tests/certs/file.srl b/tls/tests/certs/file.srl deleted file mode 100644 index 9e22bcb..0000000 --- a/tls/tests/certs/file.srl +++ /dev/null @@ -1 +0,0 @@ -02 diff --git a/tls/tests/certs/privkey.pem b/tls/tests/certs/privkey.pem deleted file mode 100644 index 423b9ed..0000000 --- a/tls/tests/certs/privkey.pem +++ /dev/null @@ -1,18 +0,0 @@ ------BEGIN RSA PRIVATE KEY----- -Proc-Type: 4,ENCRYPTED -DEK-Info: DES-EDE3-CBC,E5670F088D470CF8 - -j53yMhP9QC8ZElMlyTENZ9rI6mq9hjQepTGBhku8W0JuGIDSQTbDieGNJ7myTLEo -AckDGFndIPMJFxz3GU2OYZ40sZE7CL6lkc5JsgSvt2QEp5qK30l9Ij6NnXN/BfpQ -ETliDPzDNWD0ILM43C2J/sNwgwu2SgAMj7BIn2adNuT5AN1nNXdxUg+tbGrEeH39 -eiHKTBRS+40t6KMxW1ftl85zl6WRSRM+3/URdNKUbVq0DQmpFpXT1XcKGxv4GVao -X4jyj6pE5L610cIiT3vy0qK3B3UKsQNOE8Z7aTV9eKvGk7F4LVSQpFz+DDgv/nLb -f2CLIR75MAv7FhcD/Ko+RzxfExPJB0BBsYZGarZcyd1R3rVl/rQAmd+xnZZfM5kV -iRtl7ux8NldaFkZ7XU71ZkLIiivHPDEY6gKWXe3ANsXzVxSO3Zh9okT1P7jyMaNt -Ucz7xD0T7+hnmIV4EU10h849o99F37eN3Ygjjy2xZmMsCfs/Qaem1mlJF0d87472 -7pZcOd+PgBpV2W2O9NTerd6+TPhyqGhgtucrQLID7B+eheLXaexAjgBYwHv9LbOo -uCYPS9s4DBJgvoPhz+IZ/PEZVpY/w5QJ9DsBe0xOv+KWWt9KdcA0SWRYtJUznNSS -YX3eVKZD0C3d5hgr0vSDUe/p6nsgvubHH/v/9EbruXql6PCVu0akO34n+91374pi -85G3EWEuzUwxmKDCr228W5NB2bqFet9CgtHycnQ8cjM61AYpLZx4iTCxH8s6m+lY -WRr1sFm38il8oTODZTQ6o/w91RELhyMd9MTJUZNEqqsgN4y0/r7Dww== ------END RSA PRIVATE KEY----- diff --git a/tls/tests/certs/server.key b/tls/tests/certs/server.key deleted file mode 100644 index c95d6c5..0000000 --- a/tls/tests/certs/server.key +++ /dev/null @@ -1,15 +0,0 @@ ------BEGIN RSA PRIVATE KEY----- -MIICXAIBAAKBgQDCE6cHPOkPnOSpobuRDKTLcvjdmh1vAYmwOvXLcBkpN+PkN443 -2KURytg0rw4w7+HDS+KV13pAF5D5mSl/OOsfwQzi/dQKSVF0zlbz5L7rcBqIt2cG -Xz7gsX8VRMycXH0XC3QAAZUW32zYeo0G28uCttAh6wt8YCKu99+TNhRIWQIDAQAB -AoGAaMHQ48BGEO5gIwwwwW+wuDycBom8n4GV/7EjoaclfbE0aqhuNMjU+RCjuXRQ -Vav2EcOxT65ax6Ow1nmNA6YGi1GUAcktgMmY+Cl72iVyEqz8kUwUS1TBj0EqysCW -E57CJo6S9Htnhq9/qrJL1LvW2iH9mWobZnMbI6+jN8C/eTECQQDmrnS72ZzNJcLc -yU9uahH5BaX2vUWpWdurjYend3L9sHII3hZznYTOBn5a4kCfF2CD1FYlL7LMuV4q -qab8O5QNAkEA12CzTV3lpK8LOFX5CTT4gM5XAZvP0+YiThnRrGh15JRgZoV6Larn -X+Tvk8qYGRZdjILnNaOCqp9j3z7Mpvt2fQJAR+Z6dg6m4/5wFTcd7fFbtr1+9EAc -VWOvp3IOpTEDA3WapY7reo/PVBQMEDHTKIM1zwFA9IhAd7UTV8LXTGkZhQJAVUBU -mLojDRWwdkMpiShreOiz7dIT6Ic+avWzVfAfQjQtGEebPfpZDU8cOb7Gh5+ftd+W -z1eCgDEJIjPEZBBDLQJBAKnXJh9w47et8NZHsXjdqV/nWiZ2uzxijbEBCQTgLhcT -e4oSQidcpEPRAB5jsCZAa5czv74kDIRqYCjFL8fAT+4= ------END RSA PRIVATE KEY----- diff --git a/tls/tests/certs/server.pem b/tls/tests/certs/server.pem deleted file mode 100644 index a5d9614..0000000 --- a/tls/tests/certs/server.pem +++ /dev/null @@ -1,14 +0,0 @@ ------BEGIN CERTIFICATE----- -MIICHzCCAYgCAQAwDQYJKoZIhvcNAQEEBQAwWDELMAkGA1UEBhMCQ0ExGTAXBgNV -BAgTEEJyaXRpc2ggQ29sdW1iaWExEjAQBgNVBAcTCVZhbmNvdXZlcjEaMBgGA1UE -ChMRU2FtcGxlIENlcnRzIEludGwwHhcNMDEwNjIxMjAyODUyWhcNMDEwNzIxMjAy -ODUyWjBYMQswCQYDVQQGEwJDQTEZMBcGA1UECBMQQnJpdGlzaCBDb2x1bWJpYTES -MBAGA1UEBxMJVmFuY291dmVyMRowGAYDVQQKExFTYW1wbGUgQ2VydHMgSW50bDCB -nzANBgkqhkiG9w0BAQEFAAOBjQAwgYkCgYEAwhOnBzzpD5zkqaG7kQyky3L43Zod -bwGJsDr1y3AZKTfj5DeON9ilEcrYNK8OMO/hw0vildd6QBeQ+ZkpfzjrH8EM4v3U -CklRdM5W8+S+63AaiLdnBl8+4LF/FUTMnFx9Fwt0AAGVFt9s2HqNBtvLgrbQIesL -fGAirvffkzYUSFkCAwEAATANBgkqhkiG9w0BAQQFAAOBgQBXJZfVMqZw9T4EgXQo -nM0geAByeqyOCoR+4dPv4hipf/c1m8sZgG1SxrXVThey4i4UkZenKz+VlPGDX0++ -sJBKod+aa24wcR5IQBTDuxzwduwuKkbjzGG+zdBXjOgxdcLxw7ozNciSSALYVnez -0uX7n/lAP92SlcEXhoUroMjeLQ== ------END CERTIFICATE----- diff --git a/tls/tests/certs/server.req b/tls/tests/certs/server.req deleted file mode 100644 index b7b9d26..0000000 --- a/tls/tests/certs/server.req +++ /dev/null @@ -1,11 +0,0 @@ ------BEGIN CERTIFICATE REQUEST----- -MIIBmDCCAQECAQAwWDELMAkGA1UEBhMCQ0ExGTAXBgNVBAgTEEJyaXRpc2ggQ29s -dW1iaWExEjAQBgNVBAcTCVZhbmNvdXZlcjEaMBgGA1UEChMRU2FtcGxlIENlcnRz -IEludGwwgZ8wDQYJKoZIhvcNAQEBBQADgY0AMIGJAoGBAMITpwc86Q+c5Kmhu5EM -pMty+N2aHW8BibA69ctwGSk34+Q3jjfYpRHK2DSvDjDv4cNL4pXXekAXkPmZKX84 -6x/BDOL91ApJUXTOVvPkvutwGoi3ZwZfPuCxfxVEzJxcfRcLdAABlRbfbNh6jQbb -y4K20CHrC3xgIq7335M2FEhZAgMBAAGgADANBgkqhkiG9w0BAQQFAAOBgQBsiv9V -OdF/lp3ovGfYj3DF3QyfH6p0fCuUADKgReLKOilMDPR77WE/kExxqRR9dTzlTY4n -dEmvzfmV3Vbj8KKs3L9NoLo6vF/ZeSt+RyJQlJblzXuFqxMlpZJoYcFSZO1E0Jl8 -iHe6QMOI58MBe/waEPxvIyFo2L30wScEyy/Ynw== ------END CERTIFICATE REQUEST----- diff --git a/tls/tests/ciphers.test b/tls/tests/ciphers.test deleted file mode 100644 index f79eec1..0000000 --- a/tls/tests/ciphers.test +++ /dev/null @@ -1,159 +0,0 @@ -# Commands covered: tls::ciphers -# -# This file contains a collection of tests for one or more of the Tcl -# built-in commands. Sourcing this file into Tcl runs the tests and -# generates output for errors. No output means no errors were found. -# - -# All rights reserved. -# -# See the file "license.terms" for information on usage and redistribution -# of this file, and for a DISCLAIMER OF ALL WARRANTIES. -# - -if {[lsearch [namespace children] ::tcltest] == -1} { - package require tcltest - namespace import ::tcltest::* -} - -# The build dir is added as the first element of $PATH -set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] - -package require tls - -# One of these should == 1, depending on what type of ssl library -# tls was compiled against. (RSA BSAFE SSL-C or OpenSSL). -# -set ::tcltest::testConstraints(rsabsafe) 0 -set ::tcltest::testConstraints(openssl) [string match "OpenSSL*" [tls::version]] - -set ::EXPECTEDCIPHERS(rsabsafe) { - EDH-DSS-RC4-SHA - EDH-RSA-DES-CBC3-SHA - EDH-DSS-DES-CBC3-SHA - DES-CBC3-SHA - RC4-SHA - RC4-MD5 - EDH-RSA-DES-CBC-SHA - EDH-DSS-DES-CBC-SHA - DES-CBC-SHA - EXP-EDH-DSS-DES-56-SHA - EXP-EDH-DSS-RC4-56-SHA - EXP-DES-56-SHA - EXP-RC4-56-SHA - EXP-EDH-RSA-DES-CBC-SHA - EXP-EDH-DSS-DES-CBC-SHA - EXP-DES-CBC-SHA - EXP-RC2-CBC-MD5 - EXP-RC4-MD5 -} - -set ::EXPECTEDCIPHERS(openssl) { - AES128-SHA - AES256-SHA - DES-CBC-SHA - DES-CBC3-SHA - DHE-DSS-AES128-SHA - DHE-DSS-AES256-SHA - DHE-DSS-RC4-SHA - DHE-RSA-AES128-SHA - DHE-RSA-AES256-SHA - EDH-DSS-DES-CBC-SHA - EDH-DSS-DES-CBC3-SHA - EDH-RSA-DES-CBC-SHA - EDH-RSA-DES-CBC3-SHA - EXP-DES-CBC-SHA - EXP-EDH-DSS-DES-CBC-SHA - EXP-EDH-RSA-DES-CBC-SHA - EXP-RC2-CBC-MD5 - EXP-RC4-MD5 - EXP1024-DES-CBC-SHA - EXP1024-DHE-DSS-DES-CBC-SHA - EXP1024-DHE-DSS-RC4-SHA - EXP1024-RC2-CBC-MD5 - EXP1024-RC4-MD5 - EXP1024-RC4-SHA - IDEA-CBC-SHA - RC4-MD5 - RC4-SHA -} - -set ::EXPECTEDCIPHERS(openssl0.9.8) { - DHE-RSA-AES256-SHA - DHE-DSS-AES256-SHA - AES256-SHA - EDH-RSA-DES-CBC3-SHA - EDH-DSS-DES-CBC3-SHA - DES-CBC3-SHA - DHE-RSA-AES128-SHA - DHE-DSS-AES128-SHA - AES128-SHA - IDEA-CBC-SHA - RC4-SHA - RC4-MD5 - EDH-RSA-DES-CBC-SHA - EDH-DSS-DES-CBC-SHA - DES-CBC-SHA - EXP-EDH-RSA-DES-CBC-SHA - EXP-EDH-DSS-DES-CBC-SHA - EXP-DES-CBC-SHA - EXP-RC2-CBC-MD5 - EXP-RC4-MD5 -} - -set version "" -if {[string match "OpenSSL*" [tls::version]]} { - regexp {OpenSSL ([\d\.]+)} [tls::version] -> version -} -if {![info exists ::EXPECTEDCIPHERS(openssl$version)]} { - set version "" -} - -proc listcompare {wants haves} { - array set want {} - array set have {} - foreach item $wants { set want($item) 1 } - foreach item $haves { set have($item) 1 } - foreach item [lsort -dictionary [array names have]] { - if {[info exists want($item)]} { - unset want($item) have($item) - } - } - if {[array size want] || [array size have]} { - return [list MISSING [array names want] UNEXPECTED [array names have]] - } -} - -test ciphers-1.1 {Tls::ciphers for ssl3} {rsabsafe} { - # This will fail if you compiled against OpenSSL. - # Change the constraint setting above. - listcompare $::EXPECTEDCIPHERS(rsabsafe) [tls::ciphers ssl3] -} {} - -test ciphers-1.2 {Tls::ciphers for tls1} {rsabsafe} { - # This will fail if you compiled against OpenSSL. - # Change the constraint setting above. - listcompare $::EXPECTEDCIPHERS(rsabsafe) [tls::ciphers tls1] -} {} - -test ciphers-1.3 {Tls::ciphers for ssl3} {openssl} { - # This will fail if you compiled against RSA bsafe or with a - # different set of defines than the default. - # Change the constraint setting above. - listcompare $::EXPECTEDCIPHERS(openssl$version) [tls::ciphers ssl3] -} {} - -# This version of the test is correct for OpenSSL only. -# An equivalent test for the RSA BSAFE SSL-C is earlier in this file. - -test ciphers-1.4 {Tls::ciphers for tls1} {openssl} { - # This will fail if you compiled against RSA bsafe or with a - # different set of defines than the default. - # Change the constraint setting in all.tcl - listcompare $::EXPECTEDCIPHERS(openssl$version) [tls::ciphers tls1] -} {} - - -# cleanup -::tcltest::cleanupTests -return diff --git a/tls/tests/keytest1.tcl b/tls/tests/keytest1.tcl deleted file mode 100644 index 4076d69..0000000 --- a/tls/tests/keytest1.tcl +++ /dev/null @@ -1,23 +0,0 @@ -#!/bin/sh -# The next line is executed by /bin/sh, but not tcl \ -exec tclsh "$0" ${1+"$@"} - -package require tls - -proc creadable {s} { - puts "LINE=[gets $s]" - after 2000 - exit -} - -proc myserv {s args} { - fileevent $s readable [list creadable $s] -} - -tls::misc req 1024 $keyfile $certfile [list C CCC ST STTT L LLLL O OOOO OU OUUUU CN CNNNN Email some@email.com days 730 serial 12] - -tls::socket -keyfile $keyfile -certfile $certfile -server myserv 12300 - -puts "Now run keytest2.tcl" -vwait forever - diff --git a/tls/tests/keytest2.tcl b/tls/tests/keytest2.tcl deleted file mode 100644 index 7b717d6..0000000 --- a/tls/tests/keytest2.tcl +++ /dev/null @@ -1,8 +0,0 @@ -package require tls - -set s [tls::socket 127.0.0.1 12300] -puts $s "A line" -flush $s -puts [join [tls::status $s] \n] -exit - diff --git a/tls/tests/remote.tcl b/tls/tests/remote.tcl deleted file mode 100755 index 5e454bb..0000000 --- a/tls/tests/remote.tcl +++ /dev/null @@ -1,185 +0,0 @@ -# This file contains Tcl code to implement a remote server that can be -# used during testing of Tcl socket code. This server is used by some -# of the tests in socket.test. -# -# Source this file in the remote server you are using to test Tcl against. -# -# Copyright (c) 1995-1996 Sun Microsystems, Inc. -# -# See the file "license.terms" for information on usage and redistribution -# of this file, and for a DISCLAIMER OF ALL WARRANTIES. -# -# RCS: @(#) $Id: remote.tcl,v 1.6 2004/02/11 22:41:25 razzell Exp $ - -# load tls package -package require tls - -# Initialize message delimitor - -# Initialize command array -catch {unset command} -set command(0) "" -set callerSocket "" - -# Detect whether we should print out connection messages etc. -# set VERBOSE 1 -if {![info exists VERBOSE]} { - set VERBOSE 0 -} - -proc __doCommands__ {l s} { - global callerSocket VERBOSE - - if {$VERBOSE} { - puts "--- Server executing the following for socket $s:" - puts $l - puts "---" - } - if {0} { - set fd [open remoteServer.log a] - catch {puts $fd "skey: $serverKey"} - puts $fd "--- Server executing the following for socket $s:" - puts $fd $l - puts $fd "---" - close $fd - } - set callerSocket $s - if {[catch {uplevel #0 $l} msg]} { - if {0} { - set fd [open remoteServer.log a] - puts $fd "error: $msg" - close $fd - } - list error $msg - } else { - list success $msg - } -} - -proc __readAndExecute__ {s} { - global command VERBOSE - - set l [gets $s] - if {[string compare $l "--Marker--Marker--Marker--"] == 0} { - if {[info exists command($s)]} { - puts $s [list error incomplete_command] - } - puts $s "--Marker--Marker--Marker--" - return - } - if {[string compare $l ""] == 0} { - if {[eof $s]} { - if {$VERBOSE} { - puts "Server closing $s, eof from client" - } - close $s - } - return - } - append command($s) $l "\n" - if {[info complete $command($s)]} { - set cmds $command($s) - unset command($s) - puts $s [__doCommands__ $cmds $s] - } - if {[eof $s]} { - if {$VERBOSE} { - puts "Server closing $s, eof from client" - } - close $s - } -} - -proc __accept__ {s a p} { - global VERBOSE - - if {$VERBOSE} { - puts "Server accepts new connection from $a:$p on $s" - } - tls::handshake $s - fileevent $s readable [list __readAndExecute__ $s] - fconfigure $s -buffering line -translation crlf -} - -set serverIsSilent 0 -for {set i 0} {$i < $argc} {incr i} { - if {[string compare -serverIsSilent [lindex $argv $i]] == 0} { - set serverIsSilent 1 - break - } -} -if {![info exists serverPort]} { - if {[info exists env(serverPort)]} { - set serverPort $env(serverPort) - } -} -if {![info exists serverPort]} { - for {set i 0} {$i < $argc} {incr i} { - if {[string compare -port [lindex $argv $i]] == 0} { - if {$i < [expr $argc - 1]} { - set serverPort [lindex $argv [expr $i + 1]] - } - break - } - } -} -if {![info exists serverPort]} { - set serverPort 8048 -} - -if {![info exists serverAddress]} { - if {[info exists env(serverAddress)]} { - set serverAddress $env(serverAddress) - } -} -if {![info exists serverAddress]} { - for {set i 0} {$i < $argc} {incr i} { - if {[string compare -address [lindex $argv $i]] == 0} { - if {$i < [expr $argc - 1]} { - set serverAddress [lindex $argv [expr $i + 1]] - } - break - } - } -} -if {![info exists serverAddress]} { - set serverAddress 0.0.0.0 -} - -if {$serverIsSilent == 0} { - set l "Remote server listening on port $serverPort, IP $serverAddress." - puts "" - puts $l - for {set c [string length $l]} {$c > 0} {incr c -1} {puts -nonewline "-"} - puts "" - puts "" - puts "You have set the Tcl variables serverAddress to $serverAddress and" - puts "serverPort to $serverPort. You can set these with the -address and" - puts "-port command line options, or as environment variables in your" - puts "shell." - puts "" - puts "NOTE: The tests will not work properly if serverAddress is set to" - puts "\"localhost\" or 127.0.0.1." - puts "" - puts "When you invoke tcltest to run the tests, set the variables" - puts "remoteServerPort to $serverPort and remoteServerIP to" - puts "[info hostname]. You can set these as environment variables" - puts "from the shell. The tests will not work properly if you set" - puts "remoteServerIP to \"localhost\" or 127.0.0.1." - puts "" - puts -nonewline "Type Ctrl-C to terminate--> " - flush stdout -} - -set certsDir [file join [file dirname [info script]] certs] -set serverCert [file join $certsDir server.pem] -set caCert [file join $certsDir cacert.pem] -set serverKey [file join $certsDir server.key] -if {[catch {set serverSocket \ - [tls::socket -myaddr $serverAddress -server __accept__ \ - -cafile $caCert -certfile $serverCert -keyfile $serverKey \ - $serverPort]} msg]} { - puts "Server on $serverAddress:$serverPort cannot start: $msg" -} else { - vwait __server_wait_variable__ -} diff --git a/tls/tests/simpleClient.tcl b/tls/tests/simpleClient.tcl deleted file mode 100755 index 6325ff1..0000000 --- a/tls/tests/simpleClient.tcl +++ /dev/null @@ -1,113 +0,0 @@ -#!/bin/sh -# The next line is executed by /bin/sh, but not tcl \ -exec tclsh8.3 "$0" ${1+"$@"} - -package require tls - -set dir [file join [file dirname [info script]] ../tests/certs] -set OPTS(-cafile) [file join $dir ca.pem] -set OPTS(-cert) [file join $dir client.pem] -set OPTS(-key) [file join $dir client.key] - -set OPTS(-host) lorax -set OPTS(-port) 2468 -set OPTS(-debug) 1 -set OPTS(-count) 8 -set OPTS(-parallel) 1 - -foreach {key val} $argv { - if {![info exists OPTS($key)]} { - puts stderr "Usage: $argv0 ?options?\ - \n\t-debug boolean Debugging on or off ($OPTS(-debug))\ - \n\t-cafile file Cert. Auth. File ($OPTS(-cafile))\ - \n\t-client file Client Cert ($OPTS(-cert))\ - \n\t-ckey file Client Key ($OPTS(-key))\ - \n\t-count num No of sync. connections to make per client ($OPTS(-count))\ - \n\t-parallel num No of parallel clients to run ($OPTS(-parallel))\ - \n\t-host hostname Server hostname ($OPTS(-host))\ - \n\t-port num Server port ($OPTS(-port))" - exit - } - set OPTS($key) $val -} - -if {$OPTS(-parallel) > 1} { - # If they wanted parallel, we just spawn ourselves several times - # with the right args. - - set cmd [info nameofexecutable] - set script [info script] - for {set i 0} {$i < $OPTS(-parallel)} {incr i} { - eval [list exec $cmd $script] [array get OPTS] [list -parallel 0] & - } - exit -} - -# Local handler for any background errors. -proc bgerror {msg} { puts "BGERROR: $msg" } - -# debugging helper code -proc shortstr {str} { - return "[string replace $str 10 end ...] [string length $str]b" -} -proc dputs {msg} { if {$::OPTS(-debug)} { puts stderr $msg ; flush stderr } } - -set OPTS(openports) 0 - -# Define what we want to feed down the pipe -set megadata [string repeat [string repeat A 76]\n 1000] - -proc drain {chan} { - global OPTS - if {[catch {read $chan} data]} { - #dputs "EOF $chan ([shortstr $data])" - incr OPTS(openports) -1 - catch {close $chan} - return - } - #if {$data != ""} { dputs "got $chan ([shortstr $data])" } - if {[string match *CLOSE\n $data]} { - dputs "CLOSE $chan" - incr OPTS(openports) -1 - close $chan - return - } elseif {[eof $chan]} { - # client gone or finished - dputs "EOF $chan" - incr OPTS(openports) -1 - close $chan - return - } -} - -proc feed {sock} { - dputs "feed $sock ([shortstr $::megadata])" - puts $sock $::megadata - flush $sock - puts $sock CLOSE - flush $sock - fileevent $sock writable {} -} - -proc go {} { - global OPTS - for {set num $OPTS(-count)} {$num > 0} {incr num -1} { - set sock [tls::socket $OPTS(-host) $OPTS(-port)] - incr OPTS(openports) - fconfigure $sock -blocking 0 -buffersize 4096 - fileevent $sock writable [list feed $sock ] - fileevent $sock readable [list drain $sock] - dputs "created $sock" - } - while {1} { - # Make sure to wait until all our sockets close down. - vwait OPTS(openports) - if {$OPTS(openports) == 0} { - exit 0 - } - } -} - -tls::init -cafile $OPTS(-cafile) -certfile $OPTS(-cert) -keyfile $OPTS(-key) - -go diff --git a/tls/tests/simpleServer.tcl b/tls/tests/simpleServer.tcl deleted file mode 100755 index 4450d28..0000000 --- a/tls/tests/simpleServer.tcl +++ /dev/null @@ -1,90 +0,0 @@ -#!/bin/sh -# The next line is executed by /bin/sh, but not tcl \ -exec tclsh8.3 "$0" ${1+"$@"} - -package require tls - -set dir [file join [file dirname [info script]] ../tests/certs] -set OPTS(-cafile) [file join $dir ca.pem] -set OPTS(-cert) [file join $dir server.pem] -set OPTS(-key) [file join $dir server.key] - -set OPTS(-port) 2468 -set OPTS(-debug) 1 -set OPTS(-require) 1 - -foreach {key val} $argv { - if {![info exists OPTS($key)]} { - puts stderr "Usage: $argv0 ?options?\ - \n\t-debug boolean Debugging on or off ($OPTS(-debug))\ - \n\t-cafile file Cert. Auth. File ($OPTS(-cafile))\ - \n\t-cert file Server Cert ($OPTS(-cert))\ - \n\t-key file Server Key ($OPTS(-key))\ - \n\t-require boolean Require Certification ($OPTS(-require))\ - \n\t-port num Port to listen on ($OPTS(-port))" - exit - } - set OPTS($key) $val -} - -# Catch any background errors. -proc bgerror {msg} { puts stderr "BGERROR: $msg" } - -# debugging helper code -proc shortstr {str} { - return "[string replace $str 10 end ...] [string length $str]b" -} -proc dputs {msg} { if {$::OPTS(-debug)} { puts stderr $msg ; flush stderr } } - -# As a response we just echo the data sent to us. -# -proc respond {chan} { - if {[catch {read $chan} data]} { - #dputs "EOF $chan ([shortstr $data)" - catch {close $chan} - return - } - #if {$data != ""} { dputs "got $chan ([shortstr $data])" } - if {[eof $chan]} { - # client gone or finished - dputs "EOF $chan" - close $chan ;# release the port - return - } - puts -nonewline $chan $data - flush $chan - #dputs "sent $chan ([shortstr $data])" -} - -# Once connection is established, we need to ensure handshake. -# -proc handshake {s cmd} { - if {[eof $s]} { - dputs "handshake eof $s" - close $s - } elseif {[catch {tls::handshake $s} result]} { - # Some errors are normal. Specifically, I (hobbs) believe that - # TLS throws EAGAINs when it may not need to (or is inappropriate). - dputs "handshake error $s: $result" - } elseif {$result == 1} { - # Handshake complete - dputs "handshake complete $s" - fileevent $s readable [list $cmd $s] - } -} - -# Callback proc to accept a connection from a client. -# -proc accept { chan ip port } { - dputs "[info level 0] [fconfigure $chan]" - fconfigure $chan -blocking 0 - fileevent $chan readable [list handshake $chan respond] -} - -tls::init -cafile $OPTS(-cafile) -certfile $OPTS(-cert) -keyfile $OPTS(-key) -set chan [tls::socket -server accept -require $OPTS(-require) $OPTS(-port)] - -puts "Server waiting connection on $chan ($OPTS(-port))" -puts [fconfigure $chan] - -vwait __forever__ diff --git a/tls/tests/tlsIO.test b/tls/tests/tlsIO.test deleted file mode 100755 index e1d855a..0000000 --- a/tls/tests/tlsIO.test +++ /dev/null @@ -1,2072 +0,0 @@ -# Commands tested in this file: socket. -*- tcl -*- -# -# This file contains a collection of tests for one or more of the Tcl -# built-in commands. Sourcing this file into Tcl runs the tests and -# generates output for errors. No output means no errors were found. -# -# Copyright (c) 1994-1996 Sun Microsystems, Inc. -# Copyright (c) 1998-2000 Ajuba Solutions. -# -# See the file "license.terms" for information on usage and redistribution -# of this file, and for a DISCLAIMER OF ALL WARRANTIES. -# -# RCS: @(#) $Id: tlsIO.test,v 1.24 2015/06/06 09:07:08 apnadkarni Exp $ - -# Running socket tests with a remote server: -# ------------------------------------------ -# -# Some tests in socket.test depend on the existence of a remote server to -# which they connect. The remote server must be an instance of tcltest and it -# must run the script found in the file "remote.tcl" in this directory. You -# can start the remote server on any machine reachable from the machine on -# which you want to run the socket tests, by issuing: -# -# tcltest remote.tcl -port 8048 # Or choose another port number. -# -# If the machine you are running the remote server on has several IP -# interfaces, you can choose which interface the server listens on for -# connections by specifying the -address command line flag, so: -# -# tcltest remote.tcl -address your.machine.com -# -# These options can also be set by environment variables. On Unix, you can -# type these commands to the shell from which the remote server is started: -# -# shell% setenv serverPort 8048 -# shell% setenv serverAddress your.machine.com -# -# and subsequently you can start the remote server with: -# -# tcltest remote.tcl -# -# to have it listen on port 8048 on the interface your.machine.com. -# -# When the server starts, it prints out a detailed message containing its -# configuration information, and it will block until killed with a Ctrl-C. -# Once the remote server exists, you can run the tests in socket.test with -# the server by setting two Tcl variables: -# -# % set remoteServerIP -# % set remoteServerPort 8048 -# -# These variables are also settable from the environment. On Unix, you can: -# -# shell% setenv remoteServerIP machine.where.server.runs -# shell% setenv remoteServerPort 8048 -# -# The preamble of the socket.test file checks to see if the variables are set -# either in Tcl or in the environment; if they are, it attempts to connect to -# the server. If the connection is successful, the tests using the remote -# server will be performed; otherwise, it will attempt to start the remote -# server (via exec) on platforms that support this, on the local host, -# listening at port 8048. If all fails, a message is printed and the tests -# using the remote server are not performed. - -proc dputs {msg} { return ; puts stderr $msg ; flush stderr } - -if {[lsearch [namespace children] ::tcltest] == -1} { - package require tcltest - namespace import -force ::tcltest::* -} - -# The build dir is added as the first element of $PATH -set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] -# Load the tls package -package require tls 1.6 - -set tlsServerPort 8048 - -# Specify where the certificates are - -set certsDir [file join [file dirname [info script]] certs] -set serverCert [file join $certsDir server.pem] -set clientCert [file join $certsDir client.pem] -set caCert [file join $certsDir ca.pem] -set serverKey [file join $certsDir server.key] -set clientKey [file join $certsDir client.key] - -# Some tests require the testthread and exec commands - -set ::tcltest::testConstraints(testthread) \ - [expr {[info commands testthread] != {}}] -set ::tcltest::testConstraints(exec) [expr {[info commands exec] != {}}] - -# -# If remoteServerIP or remoteServerPort are not set, check in the -# environment variables for externally set values. -# - -if {![info exists remoteServerIP]} { - if {[info exists env(remoteServerIP)]} { - set remoteServerIP $env(remoteServerIP) - } -} -if {![info exists remoteServerPort]} { - if {[info exists env(remoteServerPort)]} { - set remoteServerPort $env(remoteServerPort) - } else { - if {[info exists remoteServerIP]} { - set remoteServerPort $tlsServerPort - } - } -} - -proc do_handshake {s {type readable} {cmd {}} args} { - if {[eof $s]} { - close $s - dputs "handshake: eof" - set ::do_handshake "eof" - } elseif {[catch {tls::handshake $s} result]} { - # Some errors are normal. - dputs "handshake: $result" - } elseif {$result == 1} { - # Handshake complete - if {[llength $args]} { eval [list fconfigure $s] $args } - if {$cmd == ""} { - fileevent $s $type "" - } else { - fileevent $s $type "$cmd [list $s]" - } - dputs "handshake: complete" - set ::do_handshake "complete" - } else { - dputs "handshake: in progress" - } -} - -# -# Check if we're supposed to do tests against the remote server -# - -set doTestsWithRemoteServer 1 -if {![info exists remoteServerIP] && ($tcl_platform(platform) != "macintosh")} { - set remoteServerIP 127.0.0.1 -} -if {($doTestsWithRemoteServer == 1) && (![info exists remoteServerPort])} { - set remoteServerPort $tlsServerPort -} - -# Attempt to connect to a remote server if one is already running. If it -# is not running or for some other reason the connect fails, attempt to -# start the remote server on the local host listening on port 8048. This -# is only done on platforms that support exec (i.e. not on the Mac). On -# platforms that do not support exec, the remote server must be started -# by the user before running the tests. - -set remoteProcChan "" -set commandSocket "" -if {$doTestsWithRemoteServer} { - catch {close $commandSocket} - if {[catch {set commandSocket [tls::socket \ - -certfile $clientCert -cafile $caCert -keyfile $clientKey \ - $remoteServerIP $remoteServerPort]}] != 0} { - if {[info commands exec] == ""} { - set noRemoteTestReason "can't exec" - set doTestsWithRemoteServer 0 - } else { - set remoteServerIP 127.0.0.1 - set remoteFile [file join [pwd] remote.tcl] - if {[catch {set remoteProcChan \ - [open "|[list $::tcltest::tcltest $remoteFile \ - -serverIsSilent -port $remoteServerPort \ - -address $remoteServerIP]" w+]} msg] == 0} { - after 1000 - if {[catch {set commandSocket [tls::socket -cafile $caCert \ - -certfile $clientCert -keyfile $clientKey \ - $remoteServerIP $remoteServerPort]} msg] == 0} { - fconfigure $commandSocket -translation crlf -buffering line - } else { - set noRemoteTestReason $msg - set doTestsWithRemoteServer 0 - } - } else { - set noRemoteTestReason "$msg $::tcltest::tcltest" - set doTestsWithRemoteServer 0 - } - } - } else { - fconfigure $commandSocket -translation crlf -buffering line - } -} - -# Some tests are run only if we are doing testing against a remote server. -set ::tcltest::testConstraints(doTestsWithRemoteServer) $doTestsWithRemoteServer -if {$doTestsWithRemoteServer == 0} { - if {[string first s $::tcltest::verbose] != -1} { - puts "Skipping tests with remote server. See tests/socket.test for" - puts "information on how to run remote server." - puts "Reason for not doing remote tests: $noRemoteTestReason" - } -} - -# -# If we do the tests, define a command to send a command to the -# remote server. -# - -if {$doTestsWithRemoteServer == 1} { - proc sendCommand {c} { - global commandSocket - - if {[eof $commandSocket]} { - error "remote server disappeared" - } - - if {[catch {puts $commandSocket $c} msg]} { - error "remote server disappeared: $msg" - } - if {[catch {puts $commandSocket "--Marker--Marker--Marker--"} msg]} { - error "remote server disappeared: $msg" - } - - set resp "" - while {1} { - set line [gets $commandSocket] - if {[eof $commandSocket]} { - error "remote server disappeared" - } - if {[string compare $line "--Marker--Marker--Marker--"] == 0} { - if {[string compare [lindex $resp 0] error] == 0} { - error [lindex $resp 1] - } else { - return [lindex $resp 1] - } - } else { - append resp $line "\n" - } - } - } - - sendCommand [list proc dputs [info args dputs] [info body dputs]] - - proc sendCertValues {} { - # We need to be able to send certificate values that normalize - # filenames across platforms - sendCommand { - set certsDir [file join [file dirname [info script]] certs] - set serverCert [file join $certsDir server.pem] - set clientCert [file join $certsDir client.pem] - set caCert [file join $certsDir cacert.pem] - set serverKey [file join $certsDir server.key] - set clientKey [file join $certsDir client.key] - } - } -} - -test tlsIO-1.1 {arg parsing for socket command} {socket} { - list [catch {tls::socket -server} msg] $msg -} {1 {wrong # args: should be "tls::socket -server command ?options? port"}} - -test tlsIO-1.2 {arg parsing for socket command} {socket} { - list [catch {tls::socket -server foo} msg] $msg -} {1 {wrong # args: should be "tls::socket -server command ?options? port"}} - -test tlsIO-1.3 {arg parsing for socket command} {socket} { - list [catch {tls::socket -myaddr} msg] $msg -} {1 {wrong # args: should be "tls::socket ?options? host port"}} - -test tlsIO-1.4 {arg parsing for socket command} {socket} { - list [catch {tls::socket -myaddr 127.0.0.1} msg] $msg -} {1 {wrong # args: should be "tls::socket ?options? host port"}} - -test tlsIO-1.5 {arg parsing for socket command} {socket} { - list [catch {tls::socket -myport} msg] $msg -} {1 {wrong # args: should be "tls::socket ?options? host port"}} - -test tlsIO-1.6 {arg parsing for socket command} {socket} { - list [catch {tls::socket -myport xxxx} msg] $msg -} {1 {wrong # args: should be "tls::socket ?options? host port"}} - -test tlsIO-1.7 {arg parsing for socket command} {socket} { - list [catch {tls::socket -myport 2522} msg] $msg -} {1 {wrong # args: should be "tls::socket ?options? host port"}} - -test tlsIO-1.8 {arg parsing for socket command} {socket} { - list [catch {tls::socket -froboz} msg] $msg -} {1 {wrong # args: should be "tls::socket ?options? host port"}} - -test tlsIO-1.9 {arg parsing for socket command} {socket} { - list [catch {tls::socket -server foo -myport 2521 3333} msg] $msg -} {1 {wrong # args: should be "tls::socket -server command ?options? port"}} - -test tlsIO-1.10 {arg parsing for socket command} {socket} { - list [catch {tls::socket host 2528 -junk} msg] $msg -} {1 {wrong # args: should be "tls::socket ?options? host port"}} - -test tlsIO-1.11 {arg parsing for socket command} {socket} { - list [catch {tls::socket -server callback 2520 --} msg] $msg -} {1 {wrong # args: should be "tls::socket -server command ?options? port"}} - -test tlsIO-1.12 {arg parsing for socket command} {socket} { - list [catch {tls::socket foo badport} msg] $msg -} {1 {expected integer but got "badport"}} - -test tlsIO-2.1 {tcp connection} {socket stdio} { - removeFile script - set f [open script w] - puts $f { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] - package require tls - set timer [after 2000 "set x timed_out"] - } - puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 8828 \]" - puts $f { - proc accept {file addr port} { - global x - set x done - close $file - } - puts ready - vwait x - after cancel $timer - close $f - puts $x - } - close $f - set f [open "|[list $::tcltest::tcltest script]" r] - gets $f x - if {[catch {tls::socket -certfile $clientCert -cafile $caCert \ - -keyfile $clientKey 127.0.0.1 8828} msg]} { - set x $msg - } else { - lappend x [gets $f] - close $msg - } - lappend x [gets $f] - close $f - set x -} {ready done {}} - -if [info exists port] { - incr port -} else { - set port [expr {$tlsServerPort + [pid]%1024}] -} - -test tlsIO-2.2 {tcp connection with client port specified} {socket stdio} { - removeFile script - set f [open script w] - puts $f { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] - package require tls - set timer [after 2000 "set x done"] - } - puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 8829 \]" - puts $f { - proc accept {sock addr port} { - global x - puts "[gets $sock] $port" - close $sock - set x done - } - puts ready - vwait x - after cancel $timer - close $f - } - close $f - set f [open "|[list $::tcltest::tcltest script]" r] - gets $f x - global port - if {[catch {tls::socket -myport $port \ - -certfile $clientCert -cafile $caCert \ - -keyfile $clientKey 127.0.0.1 8829} sock]} { - set x $sock - catch {close [tls::socket 127.0.0.1 8829]} - } else { - puts $sock hello - flush $sock - lappend x [gets $f] - close $sock - } - close $f - set x -} [list ready "hello $port"] - -test tlsIO-2.3 {tcp connection with client interface specified} {socket stdio} { - removeFile script - set f [open script w] - puts $f { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] - package require tls - set timer [after 2000 "set x done"] - } - puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 8830 \]" - puts $f { - proc accept {sock addr port} { - global x - puts "[gets $sock] $addr" - close $sock - set x done - } - puts ready - vwait x - after cancel $timer - close $f - } - close $f - set f [open "|[list $::tcltest::tcltest script]" r] - gets $f x - if {[catch {tls::socket -myaddr 127.0.0.1 \ - -certfile $clientCert -cafile $caCert \ - -keyfile $clientKey 127.0.0.1 8830} sock]} { - set x $sock - } else { - puts $sock hello - catch {flush $sock} - lappend x [gets $f] - close $sock - } - close $f - set x -} {ready {hello 127.0.0.1}} - -test tlsIO-2.4 {tcp connection with server interface specified} {socket stdio} { - removeFile script - set f [open script w] - puts $f { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] - package require tls - set timer [after 2000 "set x done"] - } - puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey -myaddr [info hostname] 8831 \]" - puts $f { - proc accept {sock addr port} { - global x - puts "[gets $sock]" - close $sock - set x done - } - puts ready - vwait x - after cancel $timer - close $f - } - close $f - set f [open "|[list $::tcltest::tcltest script]" r] - gets $f x - if {[catch {tls::socket -certfile $clientCert -cafile $caCert \ - -keyfile $clientKey [info hostname] 8831} sock]} { - set x $sock - } else { - puts $sock hello - flush $sock - lappend x [gets $f] - close $sock - } - close $f - set x -} {ready hello} - -test tlsIO-2.5 {tcp connection with redundant server port} {socket stdio} { - removeFile script - set f [open script w] - puts $f { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] - package require tls - set timer [after 2000 "set x done"] - } - puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 8832 \]" - puts $f { - proc accept {sock addr port} { - global x - puts "[gets $sock]" - close $sock - set x done - } - puts ready - vwait x - after cancel $timer - close $f - } - close $f - set f [open "|[list $::tcltest::tcltest script]" r] - gets $f x - if {[catch {tls::socket -certfile $clientCert -cafile $caCert \ - -keyfile $clientKey 127.0.0.1 8832} sock]} { - set x $sock - } else { - puts $sock hello - flush $sock - lappend x [gets $f] - close $sock - } - close $f - set x -} {ready hello} -test tlsIO-2.6 {tcp connection} {socket} { - set status ok - if {![catch {set sock [tls::socket 127.0.0.1 8833]}]} { - if {![catch {gets $sock}]} { - set status broken - } - close $sock - } - set status -} ok - -test tlsIO-2.7 {echo server, one line} {socket stdio} { - removeFile script - set f [open script w] - puts $f { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] - package require tls - set timer [after 2000 "set x done"] - } - puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 8834 \]" - puts $f { - proc accept {s a p} { - fileevent $s readable [list echo $s] - fconfigure $s -translation lf -buffering line - } - proc echo {s} { - set l [gets $s] - if {[eof $s]} { - global x - close $s - set x done - } else { - puts $s $l - } - } - puts ready - vwait x - after cancel $timer - close $f - puts done - } - close $f - set f [open "|[list $::tcltest::tcltest script]" r] - gets $f - set s [tls::socket -certfile $clientCert -cafile $caCert \ - -keyfile $clientKey 127.0.0.1 8834] - fconfigure $s -buffering line -translation lf - puts $s "hello abcdefghijklmnop" - after 1000 - set x [gets $s] - close $s - set y [gets $f] - close $f - list $x $y -} {{hello abcdefghijklmnop} done} - -test tlsIO-2.8 {echo server, loop 50 times, single connection} {socket stdio} { - set f [open script w] - puts $f { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] - package require tls - } - puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 8835 \]" - puts $f { - proc accept {s a p} { - fileevent $s readable [list echo $s] - fconfigure $s -buffering line - } - proc echo {s} { - global i - set l [gets $s] - if {[eof $s]} { - global x - close $s - set x done - } else { - incr i - puts $s $l - } - } - set i 0 - puts ready - set timer [after 20000 "set x done"] - vwait x - after cancel $timer - close $f - puts "done $i" - } - close $f - set f [open "|[list $::tcltest::tcltest script]" r] - gets $f - set s [tls::socket -certfile $clientCert -cafile $caCert \ - -keyfile $clientKey 127.0.0.1 8835] - fconfigure $s -buffering line - catch { - for {set x 0} {$x < 50} {incr x} { - puts $s "hello abcdefghijklmnop" - gets $s - } - } - close $s - catch {set x [gets $f]} - close $f - set x -} {done 50} - -test tlsIO-2.9 {socket conflict} {socket stdio} { - set s [tls::socket -server accept 8828] - removeFile script - set f [open script w] - puts -nonewline $f { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] - package require tls - tls::socket -server accept 8828 - } - close $f - set f [open "|[list $::tcltest::tcltest script]" r] - gets $f - after 100 - set x [list [catch {close $f} msg] [string range $msg 0 43]] - close $s - set x -} {1 {couldn't open socket: address already in use}} - -test tlsIO-2.10 {close on accept, accepted socket lives} {socket} { - set done 0 - set timer [after 20000 "set done timed_out"] - set ss [tls::socket -server accept -certfile $serverCert -cafile $caCert \ - -keyfile $serverKey 8830] - proc accept {s a p} { - global ss - close $ss - fileevent $s readable "readit $s" - fconfigure $s -trans lf - } - proc readit {s} { - global done - gets $s - close $s - set done 1 - } - set cs [tls::socket -certfile $clientCert -cafile $caCert \ - -keyfile $clientKey [info hostname] 8830] - close $cs - - vwait done - after cancel $timer - set done -} 1 - -test tlsIO-2.11 {detecting new data} {socket} { - proc accept {s a p} { - global sock - # when doing an in-process client/server test, both sides need - # to be non-blocking for the TLS handshake. Also make sure - # to return the channel to line buffering mode. - fconfigure $s -blocking 0 -buffering line - set sock $s - fileevent $s readable [list do_handshake $s] - } - - set s [tls::socket -server accept \ - -certfile $serverCert -cafile $caCert -keyfile $serverKey 8400] - set sock "" - set s2 [tls::socket -certfile $clientCert -cafile $caCert \ - -keyfile $clientKey 127.0.0.1 8400] - # when doing an in-process client/server test, both sides need - # to be non-blocking for the TLS handshake Also make sure to - # return the channel to line buffering mode (TLS sets it to 'none'). - fconfigure $s2 -blocking 0 -buffering line - vwait sock - puts $s2 one - flush $s2 - # need update to complete TLS handshake in-process - update - after 500 - fconfigure $sock -blocking 0 - set result a:[gets $sock] - lappend result b:[gets $sock] - fconfigure $sock -blocking 1 - puts $s2 two - flush $s2 - fconfigure $sock -blocking 0 - lappend result c:[gets $sock] - fconfigure $sock -blocking 1 - close $s2 - close $s - close $sock - set result -} {a:one b: c:two} - -test tlsIO-2.12 {tcp connection; no certificates specified} \ - {socket stdio unixOnly} { - # There is a debug assertion on Windows/SSL that causes a crash when the - # certificate isn't specified. - removeFile script - set f [open script w] - puts $f { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] - package require tls - set timer [after 2000 "set x timed_out"] - set f [tls::socket -server accept 8828] - proc accept {file addr port} { - global x - set x done - close $file - } - puts ready - vwait x - after cancel $timer - close $f - puts $x - } - close $f - set f [open "|[list $::tcltest::tcltest script]" r] - gets $f x - if {[catch {tls::socket 127.0.0.1 8828} msg]} { - set x $msg - } else { - lappend x [gets $f] - close $msg - } - lappend x [gets $f] - close $f - set x -} {ready done {}} - -test tlsIO-3.1 {socket conflict} {socket stdio} { - removeFile script - set f [open script w] - puts $f { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] - package require tls - } - puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 8828 \]" - puts $f { - puts ready - gets stdin - close $f - } - close $f - set f [open "|[list $::tcltest::tcltest script]" r+] - gets $f - set x [list [catch {tls::socket \ - -certfile $clientCert -cafile $caCert -keyfile $clientKey \ - -server accept 8828} msg] \ - $msg] - puts $f bye - close $f - set x -} {1 {couldn't open socket: address already in use}} - -test tlsIO-3.2 {server with several clients} {socket stdio} { - removeFile script - set f [open script w] - puts $f { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] - package require tls - set t1 [after 30000 "set x timed_out"] - set t2 [after 31000 "set x timed_out"] - set t3 [after 32000 "set x timed_out"] - set counter 0 - } - puts $f "set s \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 8828 \]" - puts $f { - proc accept {s a p} { - fileevent $s readable [list echo $s] - fconfigure $s -buffering line - } - proc echo {s} { - global x - set l [gets $s] - if {[eof $s]} { - close $s - set x done - } else { - puts $s $l - } - } - puts ready - vwait x - after cancel $t1 - vwait x - after cancel $t2 - vwait x - after cancel $t3 - close $s - puts $x - } - close $f - set f [open "|[list $::tcltest::tcltest script]" r+] - set x [gets $f] - set s1 [tls::socket \ - -certfile $clientCert -cafile $caCert -keyfile $clientKey \ - 127.0.0.1 8828] - fconfigure $s1 -buffering line - set s2 [tls::socket \ - -certfile $clientCert -cafile $caCert -keyfile $clientKey \ - 127.0.0.1 8828] - fconfigure $s2 -buffering line - set s3 [tls::socket \ - -certfile $clientCert -cafile $caCert -keyfile $clientKey \ - 127.0.0.1 8828] - fconfigure $s3 -buffering line - for {set i 0} {$i < 100} {incr i} { - puts $s1 hello,s1 - gets $s1 - puts $s2 hello,s2 - gets $s2 - puts $s3 hello,s3 - gets $s3 - } - close $s1 - close $s2 - close $s3 - lappend x [gets $f] - close $f - set x -} {ready done} - -test tlsIO-4.1 {server with several clients} {socket stdio} { - # have seen intermittent hangs on Windows - removeFile script - set f [open script w] - puts $f { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] - package require tls - gets stdin - } - puts $f "set s \[tls::socket -certfile $clientCert -cafile $caCert -keyfile $clientKey 127.0.0.1 8828 \]" - puts $f { - fconfigure $s -buffering line - for {set i 0} {$i < 100} {incr i} { - puts $s hello - gets $s - } - close $s - puts bye - gets stdin - } - close $f - set p1 [open "|[list $::tcltest::tcltest script]" r+] - fconfigure $p1 -buffering line - set p2 [open "|[list $::tcltest::tcltest script]" r+] - fconfigure $p2 -buffering line - set p3 [open "|[list $::tcltest::tcltest script]" r+] - fconfigure $p3 -buffering line - proc accept {s a p} { - fconfigure $s -buffering line - fileevent $s readable [list echo $s] - } - proc echo {s} { - global x - set l [gets $s] - if {[eof $s]} { - close $s - set x done - } else { - puts $s $l - } - } - set t1 [after 30000 "set x timed_out"] - set t2 [after 31000 "set x timed_out"] - set t3 [after 32000 "set x timed_out"] - set s [tls::socket \ - -certfile $serverCert -cafile $caCert -keyfile $serverKey \ - -server accept 8828] - puts $p1 open - puts $p2 open - puts $p3 open - vwait x - vwait x - vwait x - after cancel $t1 - after cancel $t2 - after cancel $t3 - close $s - set l "" - lappend l [list p1 [gets $p1] $x] - lappend l [list p2 [gets $p2] $x] - lappend l [list p3 [gets $p3] $x] - puts $p1 bye - puts $p2 bye - puts $p3 bye - close $p1 - close $p2 - close $p3 - set l -} {{p1 bye done} {p2 bye done} {p3 bye done}} - -test tlsIO-4.2 {byte order problems, socket numbers, htons} {socket} { - set x ok - if {[catch {tls::socket -server dodo 0x3000} msg]} { - set x $msg - } else { - close $msg - } - set x -} ok - -test tlsIO-5.1 {byte order problems, socket numbers, htons} \ - {socket unixOnly notRoot} { - set x {couldn't open socket: not owner} - if {![catch {tls::socket -server dodo 0x1} msg]} { - set x {htons problem, should be disallowed, are you running as SU?} - close $msg - } - set x -} {couldn't open socket: not owner} -test tlsIO-5.2 {byte order problems, socket numbers, htons} {socket} { - set x {couldn't open socket: port number too high} - if {![catch {tls::socket -server dodo 0x10000} msg]} { - set x {port resolution problem, should be disallowed} - close $msg - } - set x -} {couldn't open socket: port number too high} -test tlsIO-5.3 {byte order problems, socket numbers, htons} \ - {socket unixOnly notRoot} { - set x {couldn't open socket: not owner} - if {![catch {tls::socket -server dodo 21} msg]} { - set x {htons problem, should be disallowed, are you running as SU?} - close $msg - } - set x -} {couldn't open socket: not owner} - -test tlsIO-6.1 {accept callback error} {socket stdio} { - # There is a debug assertion on Windows/SSL that causes a crash when the - # certificate isn't specified. - removeFile script - set f [open script w] - puts $f { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] - package require tls - gets stdin - } - puts $f [list tls::socket -cafile $caCert 127.0.0.1 8848] - close $f - set f [open "|[list $::tcltest::tcltest script]" r+] - proc bgerror args { - global x - set x $args - } - proc accept {s a p} {expr 10 / 0} - set s [tls::socket -server accept \ - -certfile $serverCert -cafile $caCert -keyfile $serverKey 8848] - puts $f hello - close $f - set timer [after 10000 "set x timed_out"] - vwait x - after cancel $timer - close $s - rename bgerror {} - set x -} {{divide by zero}} - -test tlsIO-7.1 {testing socket specific options} {socket stdio} { - removeFile script - set f [open script w] - puts $f { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] - package require tls - } - puts $f [list tls::socket -server accept \ - -certfile $serverCert -cafile $caCert -keyfile $serverKey 8820] - puts $f { - proc accept args { - global x - set x done - } - puts ready - set timer [after 10000 "set x timed_out"] - vwait x - after cancel $timer - } - close $f - set f [open "|[list $::tcltest::tcltest script]" r] - gets $f - set s [tls::socket \ - -certfile $clientCert -cafile $caCert -keyfile $clientKey \ - 127.0.0.1 8820] - set p [fconfigure $s -peername] - close $s - close $f - set l "" - lappend l [string compare [lindex $p 0] 127.0.0.1] - lappend l [string compare [lindex $p 2] 8820] - lappend l [llength $p] -} {0 0 3} - -test tlsIO-7.2 {testing socket specific options} {socket stdio} { - removeFile script - set f [open script w] - puts $f { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] - package require tls - } - puts $f "tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 8821" - puts $f { - proc accept args { - global x - set x done - } - puts ready - set timer [after 10000 "set x timed_out"] - vwait x - after cancel $timer - } - close $f - set f [open "|[list $::tcltest::tcltest script]" r] - gets $f - set s [tls::socket \ - -certfile $clientCert -cafile $caCert -keyfile $clientKey \ - 127.0.0.1 8821] - set p [fconfigure $s -sockname] - close $s - close $f - set l "" - lappend l [llength $p] - lappend l [lindex $p 0] - lappend l [string equal [lindex $p 2] 8821] -} {3 127.0.0.1 0} - -test tlsIO-7.3 {testing socket specific options} {socket} { - set s [tls::socket \ - -certfile $serverCert -cafile $caCert -keyfile $serverKey \ - -server accept 8822] - set l [llength [fconfigure $s]] - close $s - update - # A bug fixed in fconfigure for 8.3.4+ make this return 14 normally, - # but 12 in older versions. - expr {$l >= 12 && (($l % 2) == 0)} -} 1 - -# bug report #5812 fconfigure doesn't return value for '-sockname' - -test tlsIO-7.4 {testing socket specific options} {socket} { - set s [tls::socket \ - -certfile $serverCert -cafile $caCert -keyfile $serverKey \ - -server accept 8823] - proc accept {s a p} { - global x - set x [fconfigure $s -sockname] - close $s - } - set s1 [tls::socket \ - -certfile $clientCert -cafile $caCert -keyfile $clientKey \ - [info hostname] 8823] - set timer [after 10000 "set x timed_out"] - vwait x - after cancel $timer - close $s - close $s1 - set l "" - lappend l [lindex $x 2] [llength $x] -} {8823 3} - -# bug report #5812 fconfigure doesn't return value for '-sockname' - -test tlsIO-7.5 {testing socket specific options} {socket unixOrPc} { - set s [tls::socket \ - -certfile $serverCert -cafile $caCert -keyfile $serverKey \ - -server accept 8829] - proc accept {s a p} { - global x - set x [fconfigure $s -sockname] - close $s - } - set s1 [tls::socket \ - -certfile $clientCert -cafile $caCert -keyfile $clientKey \ - 127.0.0.1 8829] - set timer [after 10000 "set x timed_out"] - vwait x - after cancel $timer - close $s - close $s1 - set l "" - lappend l [lindex $x 0] [lindex $x 2] [llength $x] -} {127.0.0.1 8829 3} - -test tlsIO-8.1 {testing -async flag on sockets} {socket} { - # NOTE: This test may fail on some Solaris 2.4 systems. - # See notes in Tcl's socket.test. - set s [tls::socket \ - -certfile $serverCert -cafile $caCert -keyfile $serverKey \ - -server accept 8830] - proc accept {s a p} { - global x - # when doing an in-process client/server test, both sides need - # to be non-blocking for the TLS handshake. Also make sure - # to return the channel to line buffering mode. - fconfigure $s -blocking 0 -buffering line - puts $s bye - # Only OpenSSL 0.9.5a on Windows seems to need the after (delayed) - # close, but it works just the same for all others. -hobbs - after 500 close $s - set x done - } - set s1 [tls::socket \ - -certfile $clientCert -cafile $caCert -keyfile $clientKey \ - -async [info hostname] 8830] - # when doing an in-process client/server test, both sides need - # to be non-blocking for the TLS handshake Also make sure to - # return the channel to line buffering mode (TLS sets it to 'none'). - fconfigure $s1 -blocking 0 -buffering line - vwait x - # TLS handshaking needs one byte from the client... - puts $s1 a - # need update to complete TLS handshake in-process - update - set z [gets $s1] - close $s - close $s1 - set z -} bye - -test tlsIO-9.1 {testing spurious events} {socket} { - set len 0 - set spurious 0 - set done 0 - proc readlittle {s} { - global spurious done len - set l [read $s 1] - if {[string length $l] == 0} { - if {![eof $s]} { - incr spurious - } else { - close $s - set done 1 - } - } else { - incr len [string length $l] - } - } - proc accept {s a p} { - fconfigure $s -blocking 0 - fileevent $s readable [list do_handshake $s readable readlittle \ - -buffering none] - } - set s [tls::socket \ - -certfile $serverCert -cafile $caCert -keyfile $serverKey \ - -server accept 8831] - set c [tls::socket \ - -certfile $clientCert -cafile $caCert -keyfile $clientKey \ - [info hostname] 8831] - # This differs from socket-9.1 in that both sides need to be - # non-blocking because of TLS' required handshake - fconfigure $c -blocking 0 - puts -nonewline $c 01234567890123456789012345678901234567890123456789 - close $c - set timer [after 10000 "set done timed_out"] - vwait done - after cancel $timer - close $s - list $spurious $len -} {0 50} - -test tlsIO-9.2 {testing async write, fileevents, flush on close} {socket} { - set firstblock [string repeat a 31] - set secondblock [string repeat b 65535] - proc accept {s a p} { - fconfigure $s -blocking 0 - fileevent $s readable [list do_handshake $s readable readable \ - -translation lf -buffersize 16384 -buffering line] - } - proc readable {s} { - set l [gets $s] - dputs "got \"[string replace $l 10 end-3 ...]\" \ - ([string length $l]) from $s" - fileevent $s readable {} - after 1000 respond $s - } - proc respond {s} { - global firstblock - dputs "send \"[string replace $firstblock 10 end-3 ...]\" \ - ([string length $firstblock]) down $s" - puts -nonewline $s $firstblock - after 1000 writedata $s - } - proc writedata {s} { - global secondblock - dputs "send \"[string replace $secondblock 10 end-3 ...]\" \ - ([string length $secondblock]) down $s" - puts -nonewline $s $secondblock - close $s - } - set s [tls::socket \ - -certfile $serverCert -cafile $caCert -keyfile $serverKey \ - -server accept 8832] - set c [tls::socket \ - -certfile $clientCert -cafile $caCert -keyfile $clientKey \ - [info hostname] 8832] - fconfigure $c -blocking 0 -trans lf -buffering line - set count 0 - puts $c hello - proc readit {s} { - global count done - set data [read $s] - dputs "read \"[string replace $data 10 end-3 ...]\" \ - ([string length $data]) from $s" - incr count [string length $data] - if {[eof $s]} { - close $s - set done 1 - } - } - fileevent $c readable "readit $c" - set done 0 - set timer [after 10000 "set done timed_out"] - vwait done - after cancel $timer - close $s - list $count $done -} {65566 1} - -test tlsIO-9.3 {testing EOF stickyness} {unexplainedFailure socket} { - # HOBBS: never worked correctly - proc count_to_eof {s} { - global count done timer - set l [gets $s] - if {[eof $s]} { - incr count - if {$count > 9} { - close $s - set done true - set count {eof is sticky} - after cancel $timer - } - } - } - proc timerproc {} { - global done count c - set done true - set count {timer went off, eof is not sticky} - close $c - } - set count 0 - set done false - proc write_then_close {s} { - puts $s bye - close $s - } - proc accept {s a p} { - fconfigure $s -blocking 0 -buffering line -translation lf - fileevent $s writable [list do_handshake $s writable write_then_close \ - -buffering line -translation lf] - } - set s [tls::socket \ - -certfile $serverCert -cafile $caCert -keyfile $serverKey \ - -server accept 8833] - set c [tls::socket \ - -certfile $clientCert -cafile $caCert -keyfile $clientKey \ - [info hostname] 8833] - fconfigure $c -blocking 0 -buffering line -translation lf - fileevent $c readable "count_to_eof $c" - set timer [after 2000 timerproc] - vwait done - close $s - set count -} {eof is sticky} - -removeFile script - -test tlsIO-10.1 {testing socket accept callback error handling} {socket} { - set goterror 0 - proc bgerror args {global goterror; set goterror 1} - set s [tls::socket -cafile $caCert -server accept 8898] - proc accept {s a p} {close $s; error} - set c [tls::socket -cafile $caCert 127.0.0.1 8898] - vwait goterror - close $s - close $c - set goterror -} 1 - -test tlsIO-11.1 {tcp connection} {socket doTestsWithRemoteServer} { - sendCertValues - sendCommand { - set socket9_1_test_server [tls::socket -server accept \ - -certfile $serverCert -cafile $caCert -keyfile $serverKey 8834] - proc accept {s a p} { - tls::handshake $s - puts $s done - close $s - } - } - set s [tls::socket \ - -certfile $clientCert -cafile $caCert -keyfile $clientKey \ - $remoteServerIP 8834] - set r [gets $s] - close $s - sendCommand {close $socket9_1_test_server} - set r -} done - -test tlsIO-11.2 {client specifies its port} {socket doTestsWithRemoteServer} { - if {[info exists port]} { - incr port - } else { - set port [expr {$tlsServerPort + [pid]%1024}] - } - sendCertValues - sendCommand { - set socket9_2_test_server [tls::socket -server accept \ - -certfile $serverCert -cafile $caCert -keyfile $serverKey 8835] - proc accept {s a p} { - tls::handshake $s - puts $s $p - close $s - } - } - set s [tls::socket \ - -certfile $clientCert -cafile $caCert -keyfile $clientKey \ - -myport $port $remoteServerIP 8835] - set r [gets $s] - close $s - sendCommand {close $socket9_2_test_server} - if {$r == $port} { - set result ok - } else { - set result broken - } - set result -} ok - -test tlsIO-11.3 {trying to connect, no server} {socket doTestsWithRemoteServer} { - set status ok - if {![catch {set s [tls::socket \ - -certfile $clientCert -cafile $caCert -keyfile $clientKey \ - $remoteServerIp 8836]}]} { - if {![catch {gets $s}]} { - set status broken - } - close $s - } - set status -} ok - -test tlsIO-11.4 {remote echo, one line} {socket doTestsWithRemoteServer} { - sendCertValues - sendCommand { - set socket10_6_test_server [tls::socket \ - -certfile $serverCert -cafile $caCert -keyfile $serverKey \ - -server accept 8836] - proc accept {s a p} { - tls::handshake $s - fileevent $s readable [list echo $s] - fconfigure $s -buffering line -translation crlf - } - proc echo {s} { - set l [gets $s] - if {[eof $s]} { - close $s - } else { - puts $s $l - } - } - } - set f [tls::socket \ - -certfile $clientCert -cafile $caCert -keyfile $clientKey \ - $remoteServerIP 8836] - fconfigure $f -translation crlf -buffering line - puts $f hello - set r [gets $f] - close $f - sendCommand {close $socket10_6_test_server} - set r -} hello - -test tlsIO-11.5 {remote echo, 50 lines} {socket doTestsWithRemoteServer} { - sendCertValues - sendCommand { - set socket10_7_test_server [tls::socket -server accept \ - -certfile $serverCert -cafile $caCert -keyfile $serverKey 8836] - proc accept {s a p} { - tls::handshake $s - fileevent $s readable [list echo $s] - fconfigure $s -buffering line -translation crlf - } - proc echo {s} { - set l [gets $s] - if {[eof $s]} { - close $s - } else { - puts $s $l - } - } - } - set f [tls::socket \ - -certfile $clientCert -cafile $caCert -keyfile $clientKey \ - $remoteServerIP 8836] - fconfigure $f -translation crlf -buffering line - for {set cnt 0} {$cnt < 50} {incr cnt} { - puts $f "hello, $cnt" - if {[string compare [gets $f] "hello, $cnt"] != 0} { - break - } - } - close $f - sendCommand {close $socket10_7_test_server} - set cnt -} 50 - -# Macintosh sockets can have more than one server per port -if {$tcl_platform(platform) == "macintosh"} { - set conflictResult {0 8836} -} else { - set conflictResult {1 {couldn't open socket: address already in use}} -} - -test tlsIO-11.6 {socket conflict} {socket doTestsWithRemoteServer} { - set s1 [tls::socket \ - -certfile $serverCert -cafile $caCert -keyfile $serverKey \ - -server accept 8836] - if {[catch {set s2 [tls::socket \ - -certfile $serverCert -cafile $caCert -keyfile $serverKey \ - -server accept 8836]} msg]} { - set result [list 1 $msg] - } else { - set result [list 0 [lindex [fconfigure $s2 -sockname] 2]] - close $s2 - } - close $s1 - set result -} $conflictResult - -test tlsIO-11.7 {server with several clients} {socket doTestsWithRemoteServer} { - sendCertValues - sendCommand { - set socket10_9_test_server [tls::socket \ - -certfile $serverCert -cafile $caCert -keyfile $serverKey \ - -server accept 8836] - proc accept {s a p} { - fconfigure $s -buffering line - fileevent $s readable [list echo $s] - } - proc echo {s} { - set l [gets $s] - if {[eof $s]} { - close $s - } else { - puts $s $l - } - } - } - set s1 [tls::socket \ - -certfile $clientCert -cafile $caCert -keyfile $clientKey \ - $remoteServerIP 8836] - fconfigure $s1 -buffering line - set s2 [tls::socket \ - -certfile $clientCert -cafile $caCert -keyfile $clientKey \ - $remoteServerIP 8836] - fconfigure $s2 -buffering line - set s3 [tls::socket \ - -certfile $clientCert -cafile $caCert -keyfile $clientKey \ - $remoteServerIP 8836] - fconfigure $s3 -buffering line - for {set i 0} {$i < 100} {incr i} { - puts $s1 hello,s1 - gets $s1 - puts $s2 hello,s2 - gets $s2 - puts $s3 hello,s3 - gets $s3 - } - close $s1 - close $s2 - close $s3 - sendCommand {close $socket10_9_test_server} - set i -} 100 - -test tlsIO-11.8 {client with several servers} {socket doTestsWithRemoteServer} { - sendCertValues - sendCommand { - tls::init -certfile $serverCert -cafile $caCert -keyfile $serverKey - set s1 [tls::socket -server "accept 4003" 4003] - set s2 [tls::socket -server "accept 4004" 4004] - set s3 [tls::socket -server "accept 4005" 4005] - proc handshake {s mp} { - if {[eof $s]} { - close $s - } elseif {[catch {tls::handshake $s} result]} { - # Some errors are normal. - } elseif {$result == 1} { - # Handshake complete - fileevent $s readable "" - puts $s $mp - close $s - } - } - proc accept {mp s a p} { - # These have to accept non-blocking, because the handshaking - # order isn't deterministic - fconfigure $s -blocking 0 -buffering line - fileevent $s readable [list handshake $s $mp] - } - } - tls::init -certfile $clientCert -cafile $caCert -keyfile $clientKey - set s1 [tls::socket $remoteServerIP 4003] - set s2 [tls::socket $remoteServerIP 4004] - set s3 [tls::socket $remoteServerIP 4005] - set l "" - lappend l [gets $s1] [gets $s1] [eof $s1] [gets $s2] [gets $s2] [eof $s2] \ - [gets $s3] [gets $s3] [eof $s3] - close $s1 - close $s2 - close $s3 - sendCommand { - close $s1 - close $s2 - close $s3 - } - set l -} {4003 {} 1 4004 {} 1 4005 {} 1} - -test tlsIO-11.9 {accept callback error} {socket doTestsWithRemoteServer} { - set s [tls::socket \ - -certfile $serverCert -cafile $caCert -keyfile $serverKey \ - -server accept 8836] - proc accept {s a p} {expr 10 / 0} - proc bgerror args { - global x - set x $args - } - sendCertValues - if {[catch {sendCommand { - set peername [fconfigure $callerSocket -peername] - set s [tls::socket \ - -certfile $clientCert -cafile $caCert -keyfile $clientKey \ - [lindex $peername 0] 8836] - close $s - }} msg]} { - close $s - error $msg - } - set timer [after 10000 "set x timed_out"] - vwait x - after cancel $timer - close $s - rename bgerror {} - set x -} {{divide by zero}} - -test tlsIO-11.10 {testing socket specific options} {socket doTestsWithRemoteServer} { - sendCertValues - sendCommand { - set socket10_12_test_server [tls::socket \ - -certfile $serverCert -cafile $caCert -keyfile $serverKey \ - -server accept 8836] - proc accept {s a p} {close $s} - } - set s [tls::socket \ - -certfile $clientCert -cafile $caCert -keyfile $clientKey \ - $remoteServerIP 8836] - set p [fconfigure $s -peername] - set n [fconfigure $s -sockname] - set l "" - lappend l [lindex $p 2] [llength $p] [llength $p] - close $s - sendCommand {close $socket10_12_test_server} - set l -} {8836 3 3} - -test tlsIO-11.11 {testing spurious events} {socket doTestsWithRemoteServer} { - # remote equivalent of 9.1 - sendCertValues - sendCommand { - set socket_test_server [tls::socket -server accept \ - -certfile $serverCert -cafile $caCert -keyfile $serverKey 8836] - proc handshake {s} { - if {[eof $s]} { - close $s - } elseif {[catch {tls::handshake $s} result]} { - # Some errors are normal. - } elseif {$result == 1} { - # Handshake complete - fileevent $s writable "" - after 100 writesome $s - } - } - proc accept {s a p} { - fconfigure $s -translation "auto lf" - fileevent $s writable [list handshake $s] - } - proc writesome {s} { - for {set i 0} {$i < 100} {incr i} { - puts $s "line $i from remote server" - } - close $s - } - } - set len 0 - set spurious 0 - set done 0 - proc readlittle {s} { - global spurious done len - set l [read $s 1] - if {[string length $l] == 0} { - if {![eof $s]} { - incr spurious - } else { - close $s - set done 1 - } - } else { - incr len [string length $l] - } - } - set c [tls::socket \ - -certfile $clientCert -cafile $caCert -keyfile $clientKey \ - $remoteServerIP 8836] - # Get the buffering corrected - fconfigure $c -buffering line - # Put a byte into the client pipe to trigger TLS handshaking - puts $c a - fileevent $c readable [list readlittle $c] - set timer [after 10000 "set done timed_out"] - vwait done - after cancel $timer - sendCommand {close $socket_test_server} - list $spurious $len -} {0 2690} - -test tlsIO-11.12 {testing EOF stickyness} {unexplainedFailure socket doTestsWithRemoteServer} { - # remote equivalent of 9.3 - # HOBBS: never worked correctly - set counter 0 - set done 0 - proc count_up {s} { - global counter done after_id - set l [gets $s] - if {[eof $s]} { - incr counter - if {$counter > 9} { - set done {EOF is sticky} - after cancel $after_id - close $s - } - } - } - proc timed_out {} { - global c done - set done {timed_out, EOF is not sticky} - close $c - } - sendCertValues - sendCommand { - set socket10_14_test_server [tls::socket \ - -certfile $serverCert -cafile $caCert -keyfile $serverKey \ - -server accept 8836] - proc accept {s a p} { - tls::handshake $s - after 100 close $s - } - } - set c [tls::socket \ - -certfile $clientCert -cafile $caCert -keyfile $clientKey \ - $remoteServerIP 8836] - fileevent $c readable "count_up $c" - set after_id [after 1000 timed_out] - vwait done - sendCommand {close $socket10_14_test_server} - set done -} {EOF is sticky} - -test tlsIO-11.13 {testing async write, async flush, async close} \ - {socket doTestsWithRemoteServer} { - proc readit {s} { - global count done - set l [read $s] - incr count [string length $l] - if {[eof $s]} { - close $s - set done 1 - } - } - sendCertValues - sendCommand { - set firstblock [string repeat a 31] - set secondblock [string repeat b 65535] - set l [tls::socket \ - -certfile $serverCert -cafile $caCert -keyfile $serverKey \ - -server accept 8845] - proc accept {s a p} { - tls::handshake $s - fconfigure $s -blocking 0 -translation lf -buffersize 16384 \ - -buffering line - fileevent $s readable "readable $s" - } - proc readable {s} { - set l [gets $s] - fileevent $s readable {} - after 1000 respond $s - } - proc respond {s} { - global firstblock - puts -nonewline $s $firstblock - after 1000 writedata $s - } - proc writedata {s} { - global secondblock - puts -nonewline $s $secondblock - close $s - } - } - set s [tls::socket \ - -certfile $clientCert -cafile $caCert -keyfile $clientKey \ - $remoteServerIP 8845] - fconfigure $s -blocking 0 -translation lf -buffering line - set count 0 - puts $s hello - fileevent $s readable "readit $s" - set timer [after 10000 "set done timed_out"] - vwait done - after cancel $timer - sendCommand {close $l} - set count -} 65566 - -proc getdata {type file} { - # Read handler on the accepted socket. - global x - global failed - set status [catch {read $file} data] - if {$status != 0} { - set x "read failed, error was $data" - catch { close $file } - } elseif {[string compare {} $data]} { - } elseif {[fblocked $file]} { - } elseif {[eof $file]} { - if {$failed} { - set x "$type socket was inherited" - } else { - set x "$type socket was not inherited" - } - catch { close $file } - } else { - set x {impossible case} - catch { close $file } - } - return -} - -test tlsIO-12.1 {testing inheritance of server sockets} {socket exec} { - makeFile {} script1 - makeFile {} script2 - - # Script1 is just a 10 second delay. If the server socket - # is inherited, it will be held open for 10 seconds - - set f [open script1 w] - puts $f { - after 10000 exit - vwait forever - } - close $f - - # Script2 creates the server socket, launches script1, - # waits a second, and exits. The server socket will now - # be closed unless script1 inherited it. - - set f [open script2 w] - puts $f [list set tclsh $::tcltest::tcltest] - puts $f { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] - package require tls - } - puts $f "set f \[tls::socket -server accept \ - -certfile $serverCert -cafile $caCert -keyfile $serverKey 8828\]" - puts $f { - proc accept { file addr port } { - close $file - } - exec $tclsh script1 & - close $f - after 1000 exit - vwait forever - } - close $f - - # Launch script2 and wait 5 seconds - - exec $::tcltest::tcltest script2 & - after 5000 { set ok_to_proceed 1 } - vwait ok_to_proceed - - # If we can still connect to the server, the socket got inherited. - - if {[catch {tls::socket \ - -certfile $clientCert -cafile $caCert -keyfile $clientKey \ - 127.0.0.1 8828} msg]} { - set x {server socket was not inherited} - } else { - close $msg - set x {server socket was inherited} - } - - set x -} {server socket was not inherited} - -test tlsIO-12.2 {testing inheritance of client sockets} {socket exec} { - makeFile {} script1 - makeFile {} script2 - - # Script1 is just a 10 second delay. If the server socket - # is inherited, it will be held open for 10 seconds - - set f [open script1 w] - puts $f { - after 10000 exit - vwait forever - } - close $f - - # Script2 opens the client socket and writes to it. It then - # launches script1 and exits. If the child process inherited the - # client socket, the socket will still be open. - - set f [open script2 w] - puts $f [list set tclsh $::tcltest::tcltest] - puts $f { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] - package require tls - } - puts $f "set f \[tls::socket -certfile $clientCert -cafile $caCert \ - -keyfile $clientKey 127.0.0.1 8829\]" - puts $f { - exec $tclsh script1 & - puts $f testing - flush $f - after 1000 exit - vwait forever - } - close $f - - # Create the server socket - - set server [tls::socket \ - -certfile $serverCert -cafile $caCert -keyfile $serverKey \ - -server accept 8829] - proc accept { file host port } { - # When the client connects, establish the read handler - global server - close $server - fconfigure $file -blocking 0 - fileevent $file readable [list do_handshake $file readable \ - [list getdata client] -buffering line] - return - } - - # If the socket doesn't hit end-of-file in 5 seconds, the - # script1 process must have inherited the client. - - set failed 0 - after 5000 [list set failed 1] - - # Launch the script2 process - - exec $::tcltest::tcltest script2 & - - vwait x - if {!$failed} { - vwait failed - } - set x -} {client socket was not inherited} - -test tlsIO-12.3 {testing inheritance of accepted sockets} \ - {socket exec unixOnly} { - makeFile {} script1 - makeFile {} script2 - - set f [open script1 w] - puts $f { - after 10000 exit - vwait forever - } - close $f - - set f [open script2 w] - puts $f [list set tclsh $::tcltest::tcltest] - puts $f { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] - package require tls - } - puts $f "set f \[tls::socket -server accept \ - -certfile $serverCert -cafile $caCert -keyfile $serverKey 8930\]" - puts $f { - proc accept { file host port } { - global tclsh - fconfigure $file -buffering line - puts $file {test data on socket} - exec $tclsh script1 & - after 1000 exit - } - vwait forever - } - close $f - - # Launch the script2 process and connect to it. See how long - # the socket stays open - - exec $::tcltest::tcltest script2 & - - after 2000 set ok_to_proceed 1 - vwait ok_to_proceed - - set f [tls::socket \ - -certfile $clientCert -cafile $caCert -keyfile $clientKey \ - 127.0.0.1 8930] - fconfigure $f -buffering full -blocking 0 - # We need to put a byte into the read queue, otherwise the - # TLS handshake doesn't finish - puts $f a; flush $f - fileevent $f readable [list getdata accepted $f] - - # If the socket is still open after 5 seconds, the script1 process - # must have inherited the accepted socket. - - set failed 0 - after 5000 set failed 1 - - vwait x - set x -} {accepted socket was not inherited} - -test tlsIO-13.1 {Testing use of shared socket between two threads} \ - {socket testthread} { - # HOBBS: never tested - removeFile script - threadReap - - makeFile { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] - package require tls - set f [tls::socket -server accept 8828] - proc accept {s a p} { - fileevent $s readable [list echo $s] - fconfigure $s -buffering line - } - proc echo {s} { - global i - set l [gets $s] - if {[eof $s]} { - global x - close $s - set x done - } else { - incr i - puts $s $l - } - } - set i 0 - vwait x - close $f - - # thread cleans itself up. - testthread exit - } script - - # create a thread - set serverthread [testthread create { source script } ] - update - - after 1000 - set s [tls::socket 127.0.0.1 8828] - fconfigure $s -buffering line - - catch { - puts $s "hello" - gets $s result - } - close $s - update - - after 2000 - lappend result [threadReap] - - set result - -} {hello 1} - -test tlsIO-14.1 {test tls::unimport} {socket} { - list [catch {tls::unimport} msg] $msg -} {1 {wrong # args: should be "tls::unimport channel"}} -test tlsIO-14.2 {test tls::unimport} {socket} { - list [catch {tls::unimport foo bar} msg] $msg -} {1 {wrong # args: should be "tls::unimport channel"}} -test tlsIO-14.3 {test tls::unimport} {socket} { - list [catch {tls::unimport bogus} msg] $msg -} {1 {can not find channel named "bogus"}} -test tlsIO-14.4 {test tls::unimport} {socket} { - # stdin can take different names as the "top" channel - list [catch {tls::unimport stdin} msg] \ - [string match {bad channel "*": not a TLS channel} $msg] -} {1 1} -test tlsIO-14.5 {test tls::unimport} {socket} { - set len 0 - set spurious 0 - set done 0 - proc readlittle {s} { - global spurious done len - set l [read $s 1] - if {[string length $l] == 0} { - if {![eof $s]} { - incr spurious - } else { - close $s - set done 1 - } - } else { - incr len [string length $l] - } - } - proc accept {s a p} { - fconfigure $s -blocking 0 - fileevent $s readable [list do_handshake $s readable readlittle \ - -buffering none] - } - set s [tls::socket \ - -certfile $serverCert -cafile $caCert -keyfile $serverKey \ - -server accept 8831] - set c [tls::socket \ - -certfile $clientCert -cafile $caCert -keyfile $clientKey \ - [info hostname] 8831] - # only the client gets tls::import - set res [tls::unimport $c] - list $res [catch {close $c} err] $err \ - [catch {close $s} err] $err -} {{} 0 {} 0 {}} - -test tls-bug58-1.0 {test protocol negotiation failure} {socket} { - # Following code is based on what was reported in bug #58. Prior - # to fix the program would crash with a segfault. - proc Accept {sock args} { - fconfigure $sock -blocking 0; - fileevent $sock readable [list Handshake $sock] - } - proc Handshake {sock} { - set ::done HAND - catch {tls::handshake $sock} msg - set ::done $msg - } - # NOTE: when doing an in-process client/server test, both sides need - # to be non-blocking for the TLS handshake - - # Server - Only accept TLS 1 or higher - set s [tls::socket \ - -certfile $serverCert -cafile $caCert -keyfile $serverKey \ - -request 0 -require 0 -ssl2 0 -ssl3 0 -tls1 1 -tls1.1 1 -tls1.2 1 \ - -server Accept 8831] - # Client - Only propose SSL3 - set c [tls::socket -async \ - -cafile $caCert \ - -request 0 -require 0 -ssl2 0 -ssl3 1 -tls1 0 -tls1.1 0 -tls1.2 0 \ - [info hostname] 8831] - fconfigure $c -blocking 0 - puts $c a ; flush $c - after 5000 [list set ::done timeout] - vwait ::done - set ::done -} {handshake failed: wrong version number} - -# cleanup -if {[string match sock* $commandSocket] == 1} { - puts $commandSocket exit - flush $commandSocket -} -catch {close $commandSocket} -catch {close $remoteProcChan} -::tcltest::cleanupTests -flush stdout -return diff --git a/tls/tls.c b/tls/tls.c deleted file mode 100644 index dd95e93..0000000 --- a/tls/tls.c +++ /dev/null @@ -1,1833 +0,0 @@ -/* - * Copyright (C) 1997-1999 Matt Newman - * some modifications: - * Copyright (C) 2000 Ajuba Solutions - * Copyright (C) 2002 ActiveState Corporation - * Copyright (C) 2004 Starfish Systems - * - * $Header: /cvsroot/tls/tls/tls.c,v 1.37 2015/07/07 17:16:02 andreas_kupries Exp $ - * - * TLS (aka SSL) Channel - can be layered on any bi-directional - * Tcl_Channel (Note: Requires Trf Core Patch) - * - * This was built (almost) from scratch based upon observation of - * OpenSSL 0.9.2B - * - * Addition credit is due for Andreas Kupries (a.kupries@westend.com), for - * providing the Tcl_ReplaceChannel mechanism and working closely with me - * to enhance it to support full fileevent semantics. - * - * Also work done by the follow people provided the impetus to do this "right": - * tclSSL (Colin McCormack, Shared Technology) - * SSLtcl (Peter Antman) - * - */ - -#include "tlsInt.h" -#include "tclOpts.h" -#include - -/* - * External functions - */ - -/* - * Forward declarations - */ - -#define F2N( key, dsp) \ - (((key) == NULL) ? (char *) NULL : \ - Tcl_TranslateFileName(interp, (key), (dsp))) -#define REASON() ERR_reason_error_string(ERR_get_error()) - -static void InfoCallback _ANSI_ARGS_ ((CONST SSL *ssl, int where, int ret)); - -static int CiphersObjCmd _ANSI_ARGS_ ((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); - -static int HandshakeObjCmd _ANSI_ARGS_ ((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); - -static int ImportObjCmd _ANSI_ARGS_ ((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); - -static int StatusObjCmd _ANSI_ARGS_ ((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); - -static int VersionObjCmd _ANSI_ARGS_ ((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); - -static int MiscObjCmd _ANSI_ARGS_ ((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); - -static int UnimportObjCmd _ANSI_ARGS_ ((ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])); - -static SSL_CTX *CTX_Init _ANSI_ARGS_((State *statePtr, int proto, char *key, - char *cert, char *CAdir, char *CAfile, char *ciphers, - char *DHparams)); - -static int TlsLibInit _ANSI_ARGS_ (()) ; - -#define TLS_PROTO_SSL2 0x01 -#define TLS_PROTO_SSL3 0x02 -#define TLS_PROTO_TLS1 0x04 -#define TLS_PROTO_TLS1_1 0x08 -#define TLS_PROTO_TLS1_2 0x10 -#define ENABLED(flag, mask) (((flag) & (mask)) == (mask)) - -/* - * Static data structures - */ - -#ifndef OPENSSL_NO_DH -/* code derived from output of 'openssl dhparam -C 2048' */ - -static unsigned char dh2048_p[]={ - 0xEC,0xFD,0x6F,0x66,0xD8,0xBC,0xB4,0xCB,0xD7,0xE7,0xB4,0xAE, - 0xEC,0xC0,0x06,0x25,0x40,0x9F,0x3F,0xC4,0xAC,0x34,0x19,0x36, - 0x8A,0xAB,0xA9,0xF6,0x45,0x36,0x87,0x1F,0x10,0x35,0x3F,0x90, - 0x00,0xC6,0x7A,0xE8,0x51,0xF4,0x7F,0x50,0x0F,0xC2,0x82,0x91, - 0xAD,0x60,0x1B,0x49,0xB1,0x0B,0x23,0xC3,0x37,0xAE,0x0D,0x2C, - 0x49,0xC6,0xFB,0x60,0x9D,0x50,0x2F,0x8C,0x2F,0xDE,0xE6,0x5F, - 0x53,0x8B,0x5F,0xF9,0x70,0x16,0xEE,0x51,0xD1,0xAB,0x02,0x48, - 0x61,0xF1,0xA0,0xD7,0xBD,0x04,0x24,0xF0,0xE4,0xD1,0x0A,0x4C, - 0x28,0xDC,0x22,0x78,0x7C,0xED,0x2A,0xFA,0xF4,0x57,0x7C,0xAE, - 0xDF,0x52,0xC6,0xA2,0x11,0x28,0xC5,0x3B,0xB8,0x2F,0x95,0x3F, - 0x1E,0x05,0x66,0xFE,0x7D,0x1A,0x73,0xA0,0x45,0xF8,0xBB,0x8C, - 0x64,0xB9,0xA9,0x4D,0x23,0xBE,0x20,0x60,0xA2,0xF7,0xC7,0xD8, - 0xD8,0x49,0x28,0x9A,0x81,0xAC,0xF9,0x7F,0x3C,0xFC,0xBE,0x25, - 0x5B,0x1D,0xB6,0xAB,0x08,0x06,0x11,0x8D,0x94,0x69,0x3C,0x68, - 0x98,0x5A,0x90,0xF8,0xEB,0x19,0xCA,0x9F,0x1C,0x50,0x96,0x53, - 0xEF,0xEC,0x1B,0x93,0x4F,0x53,0xB7,0xD9,0x04,0x8E,0x48,0x99, - 0x6E,0x24,0xFF,0x66,0xF5,0xB0,0xDF,0x00,0xBA,0x22,0xE2,0xB6, - 0xE3,0x3A,0xC2,0x95,0xB1,0x14,0x68,0xFB,0xA5,0x37,0x22,0x78, - 0x56,0x5C,0xA4,0x23,0x31,0x02,0x97,0x7D,0xA9,0x84,0x0B,0x12, - 0x26,0x58,0x2F,0x86,0x10,0xAD,0xB0,0xAB,0xB9,0x7B,0x05,0x9A, - 0xDE,0x11,0xF1,0xE7,0x34,0xC7,0x95,0x42,0x1C,0x4F,0xA9,0xA8, - 0x92,0xDF,0x3F,0x7B, - }; -static unsigned char dh2048_g[]={ - 0x02, -}; - - -static DH *get_dh2048() -{ - DH *dh=NULL; - - if ((dh=DH_new()) == NULL) return(NULL); - - dh->p=BN_bin2bn(dh2048_p,sizeof(dh2048_p),NULL); - dh->g=BN_bin2bn(dh2048_g,sizeof(dh2048_g),NULL); - - if ((dh->p == NULL) || (dh->g == NULL)) - return(NULL); - return(dh); -} -#endif - -/* - * Defined in Tls_Init to determine what kind of channels we are using - * (old-style 8.2.0-8.3.1 or new-style 8.3.2+). - */ -int channelTypeVersion; - -/* - * We lose the tcl password callback when we use the RSA BSAFE SSL-C 1.1.2 - * libraries instead of the current OpenSSL libraries. - */ - -#ifdef BSAFE -#define PRE_OPENSSL_0_9_4 1 -#endif - -/* - * Pre OpenSSL 0.9.4 Compat - */ - -#ifndef STACK_OF -#define STACK_OF(x) STACK -#define sk_SSL_CIPHER_num(sk) sk_num((sk)) -#define sk_SSL_CIPHER_value( sk, index) (SSL_CIPHER*)sk_value((sk), (index)) -#endif - -/* - * Thread-Safe TLS Code - */ - -#ifdef TCL_THREADS -#define OPENSSL_THREAD_DEFINES -#include - -#ifdef OPENSSL_THREADS -#include - -/* - * Threaded operation requires locking callbacks - * Based from /crypto/cryptlib.c of OpenSSL and NSOpenSSL. - */ - -static Tcl_Mutex locks[CRYPTO_NUM_LOCKS]; -static Tcl_Mutex init_mx; -static int initialized; - -static void CryptoThreadLockCallback (int mode, int n, const char *file, int line); -static unsigned long CryptoThreadIdCallback (void); - -static void -CryptoThreadLockCallback(int mode, int n, const char *file, int line) -{ - if (mode & CRYPTO_LOCK) { - Tcl_MutexLock(&locks[n]); - } else { - Tcl_MutexUnlock(&locks[n]); - } -} - -static unsigned long -CryptoThreadIdCallback(void) -{ - return (unsigned long) Tcl_GetCurrentThread(); -} -#endif /* OPENSSL_THREADS */ -#endif /* TCL_THREADS */ - - -/* - *------------------------------------------------------------------- - * - * InfoCallback -- - * - * monitors SSL connection process - * - * Results: - * None - * - * Side effects: - * Calls callback (if defined) - *------------------------------------------------------------------- - */ -static void -InfoCallback(CONST SSL *ssl, int where, int ret) -{ - State *statePtr = (State*)SSL_get_app_data((SSL *)ssl); - Tcl_Obj *cmdPtr; - char *major; char *minor; - - if (statePtr->callback == (Tcl_Obj*)NULL) - return; - - cmdPtr = Tcl_DuplicateObj(statePtr->callback); - -#if 0 - if (where & SSL_CB_ALERT) { - sev = SSL_alert_type_string_long(ret); - if (strcmp( sev, "fatal")==0) { /* Map to error */ - Tls_Error(statePtr, SSL_ERROR(ssl, 0)); - return; - } - } -#endif - if (where & SSL_CB_HANDSHAKE_START) { - major = "handshake"; - minor = "start"; - } else if (where & SSL_CB_HANDSHAKE_DONE) { - major = "handshake"; - minor = "done"; - } else { - if (where & SSL_CB_ALERT) major = "alert"; - else if (where & SSL_ST_CONNECT) major = "connect"; - else if (where & SSL_ST_ACCEPT) major = "accept"; - else major = "unknown"; - - if (where & SSL_CB_READ) minor = "read"; - else if (where & SSL_CB_WRITE) minor = "write"; - else if (where & SSL_CB_LOOP) minor = "loop"; - else if (where & SSL_CB_EXIT) minor = "exit"; - else minor = "unknown"; - } - - Tcl_ListObjAppendElement( statePtr->interp, cmdPtr, - Tcl_NewStringObj( "info", -1)); - - Tcl_ListObjAppendElement( statePtr->interp, cmdPtr, - Tcl_NewStringObj( Tcl_GetChannelName(statePtr->self), -1) ); - - Tcl_ListObjAppendElement( statePtr->interp, cmdPtr, - Tcl_NewStringObj( major, -1) ); - - Tcl_ListObjAppendElement( statePtr->interp, cmdPtr, - Tcl_NewStringObj( minor, -1) ); - - if (where & (SSL_CB_LOOP|SSL_CB_EXIT)) { - Tcl_ListObjAppendElement( statePtr->interp, cmdPtr, - Tcl_NewStringObj( SSL_state_string_long(ssl), -1) ); - } else if (where & SSL_CB_ALERT) { - CONST char *cp = (char *) SSL_alert_desc_string_long(ret); - - Tcl_ListObjAppendElement( statePtr->interp, cmdPtr, - Tcl_NewStringObj( cp, -1) ); - } else { - Tcl_ListObjAppendElement( statePtr->interp, cmdPtr, - Tcl_NewStringObj( SSL_state_string_long(ssl), -1) ); - } - Tcl_Preserve( (ClientData) statePtr->interp); - Tcl_Preserve( (ClientData) statePtr); - - Tcl_IncrRefCount( cmdPtr); - (void) Tcl_EvalObjEx(statePtr->interp, cmdPtr, TCL_EVAL_GLOBAL); - Tcl_DecrRefCount( cmdPtr); - - Tcl_Release( (ClientData) statePtr); - Tcl_Release( (ClientData) statePtr->interp); - -} - -/* - *------------------------------------------------------------------- - * - * VerifyCallback -- - * - * Monitors SSL certificate validation process. - * This is called whenever a certificate is inspected - * or decided invalid. - * - * Results: - * A callback bound to the socket may return one of: - * 0 - the certificate is deemed invalid - * 1 - the certificate is deemed valid - * empty string - no change to certificate validation - * - * Side effects: - * The err field of the currently operative State is set - * to a string describing the SSL negotiation failure reason - *------------------------------------------------------------------- - */ -static int -VerifyCallback(int ok, X509_STORE_CTX *ctx) -{ - Tcl_Obj *cmdPtr, *result; - char *errStr, *string; - int length; - SSL *ssl = (SSL*)X509_STORE_CTX_get_app_data(ctx); - X509 *cert = X509_STORE_CTX_get_current_cert(ctx); - State *statePtr = (State*)SSL_get_app_data(ssl); - int depth = X509_STORE_CTX_get_error_depth(ctx); - int err = X509_STORE_CTX_get_error(ctx); - - dprintf(stderr, "Verify: %d\n", ok); - - if (!ok) { - errStr = (char*)X509_verify_cert_error_string(err); - } else { - errStr = (char *)0; - } - - if (statePtr->callback == (Tcl_Obj*)NULL) { - if (statePtr->vflags & SSL_VERIFY_FAIL_IF_NO_PEER_CERT) { - return ok; - } else { - return 1; - } - } - cmdPtr = Tcl_DuplicateObj(statePtr->callback); - - Tcl_ListObjAppendElement( statePtr->interp, cmdPtr, - Tcl_NewStringObj( "verify", -1)); - - Tcl_ListObjAppendElement( statePtr->interp, cmdPtr, - Tcl_NewStringObj( Tcl_GetChannelName(statePtr->self), -1) ); - - Tcl_ListObjAppendElement( statePtr->interp, cmdPtr, - Tcl_NewIntObj( depth) ); - - Tcl_ListObjAppendElement( statePtr->interp, cmdPtr, - Tls_NewX509Obj( statePtr->interp, cert) ); - - Tcl_ListObjAppendElement( statePtr->interp, cmdPtr, - Tcl_NewIntObj( ok) ); - - Tcl_ListObjAppendElement( statePtr->interp, cmdPtr, - Tcl_NewStringObj( errStr ? errStr : "", -1) ); - - Tcl_Preserve( (ClientData) statePtr->interp); - Tcl_Preserve( (ClientData) statePtr); - - statePtr->flags |= TLS_TCL_CALLBACK; - - Tcl_IncrRefCount( cmdPtr); - if (Tcl_EvalObjEx(statePtr->interp, cmdPtr, TCL_EVAL_GLOBAL) != TCL_OK) { - /* It got an error - reject the certificate. */ - Tcl_BackgroundError( statePtr->interp); - ok = 0; - } else { - result = Tcl_GetObjResult(statePtr->interp); - string = Tcl_GetStringFromObj(result, &length); - /* An empty result leaves verification unchanged. */ - if (length > 0) { - if (Tcl_GetIntFromObj(statePtr->interp, result, &ok) != TCL_OK) { - Tcl_BackgroundError(statePtr->interp); - ok = 0; - } - } - } - Tcl_DecrRefCount( cmdPtr); - - statePtr->flags &= ~(TLS_TCL_CALLBACK); - - Tcl_Release( (ClientData) statePtr); - Tcl_Release( (ClientData) statePtr->interp); - - return(ok); /* By default, leave verification unchanged. */ -} - -/* - *------------------------------------------------------------------- - * - * Tls_Error -- - * - * Calls callback with $fd and $msg - so the callback can decide - * what to do with errors. - * - * Side effects: - * The err field of the currently operative State is set - * to a string describing the SSL negotiation failure reason - *------------------------------------------------------------------- - */ -void -Tls_Error(State *statePtr, char *msg) -{ - Tcl_Obj *cmdPtr; - - if (msg && *msg) { - Tcl_SetErrorCode(statePtr->interp, "SSL", msg, (char *)NULL); - } else { - msg = Tcl_GetStringFromObj(Tcl_GetObjResult(statePtr->interp), NULL); - } - statePtr->err = msg; - - if (statePtr->callback == (Tcl_Obj*)NULL) { - char buf[BUFSIZ]; - sprintf(buf, "SSL channel \"%s\": error: %s", - Tcl_GetChannelName(statePtr->self), msg); - Tcl_SetResult( statePtr->interp, buf, TCL_VOLATILE); - Tcl_BackgroundError( statePtr->interp); - return; - } - cmdPtr = Tcl_DuplicateObj(statePtr->callback); - - Tcl_ListObjAppendElement(statePtr->interp, cmdPtr, - Tcl_NewStringObj("error", -1)); - - Tcl_ListObjAppendElement(statePtr->interp, cmdPtr, - Tcl_NewStringObj(Tcl_GetChannelName(statePtr->self), -1)); - - Tcl_ListObjAppendElement(statePtr->interp, cmdPtr, - Tcl_NewStringObj(msg, -1)); - - Tcl_Preserve((ClientData) statePtr->interp); - Tcl_Preserve((ClientData) statePtr); - - Tcl_IncrRefCount(cmdPtr); - if (Tcl_EvalObjEx(statePtr->interp, cmdPtr, TCL_EVAL_GLOBAL) != TCL_OK) { - Tcl_BackgroundError(statePtr->interp); - } - Tcl_DecrRefCount(cmdPtr); - - Tcl_Release((ClientData) statePtr); - Tcl_Release((ClientData) statePtr->interp); -} - -/* - *------------------------------------------------------------------- - * - * PasswordCallback -- - * - * Called when a password is needed to unpack RSA and PEM keys. - * Evals any bound password script and returns the result as - * the password string. - *------------------------------------------------------------------- - */ -#ifdef PRE_OPENSSL_0_9_4 -/* - * No way to handle user-data therefore no way without a global - * variable to access the Tcl interpreter. -*/ -static int -PasswordCallback(char *buf, int size, int verify) -{ - return -1; -} -#else -static int -PasswordCallback(char *buf, int size, int verify, void *udata) -{ - State *statePtr = (State *) udata; - Tcl_Interp *interp = statePtr->interp; - Tcl_Obj *cmdPtr; - int result; - - if (statePtr->password == NULL) { - if (Tcl_EvalEx(interp, "tls::password", -1, TCL_EVAL_GLOBAL) - == TCL_OK) { - char *ret = (char *) Tcl_GetStringResult(interp); - strncpy(buf, ret, (size_t) size); - return (int)strlen(ret); - } else { - return -1; - } - } - - cmdPtr = Tcl_DuplicateObj(statePtr->password); - - Tcl_Preserve((ClientData) statePtr->interp); - Tcl_Preserve((ClientData) statePtr); - - Tcl_IncrRefCount(cmdPtr); - result = Tcl_EvalObjEx(interp, cmdPtr, TCL_EVAL_GLOBAL); - if (result != TCL_OK) { - Tcl_BackgroundError(statePtr->interp); - } - Tcl_DecrRefCount(cmdPtr); - - Tcl_Release((ClientData) statePtr); - Tcl_Release((ClientData) statePtr->interp); - - if (result == TCL_OK) { - char *ret = (char *) Tcl_GetStringResult(interp); - strncpy(buf, ret, (size_t) size); - return (int)strlen(ret); - } else { - return -1; - } -} -#endif - -/* - *------------------------------------------------------------------- - * - * CiphersObjCmd -- list available ciphers - * - * This procedure is invoked to process the "tls::ciphers" command - * to list available ciphers, based upon protocol selected. - * - * Results: - * A standard Tcl result list. - * - * Side effects: - * constructs and destroys SSL context (CTX) - * - *------------------------------------------------------------------- - */ -static int -CiphersObjCmd(clientData, interp, objc, objv) - ClientData clientData; /* Not used. */ - Tcl_Interp *interp; - int objc; - Tcl_Obj *CONST objv[]; -{ - static CONST84 char *protocols[] = { - "ssl2", "ssl3", "tls1", "tls1.1", "tls1.2", NULL - }; - enum protocol { - TLS_SSL2, TLS_SSL3, TLS_TLS1, TLS_TLS1_1, TLS_TLS1_2, TLS_NONE - }; - Tcl_Obj *objPtr; - SSL_CTX *ctx = NULL; - SSL *ssl = NULL; - STACK_OF(SSL_CIPHER) *sk; - char *cp, buf[BUFSIZ]; - int index, verbose = 0; - - if (objc < 2 || objc > 3) { - Tcl_WrongNumArgs(interp, 1, objv, "protocol ?verbose?"); - return TCL_ERROR; - } - if (Tcl_GetIndexFromObj( interp, objv[1], protocols, "protocol", 0, - &index) != TCL_OK) { - return TCL_ERROR; - } - if (objc > 2 && Tcl_GetBooleanFromObj( interp, objv[2], - &verbose) != TCL_OK) { - return TCL_ERROR; - } - switch ((enum protocol)index) { - case TLS_SSL2: -#if defined(NO_SSL2) - Tcl_AppendResult(interp, "protocol not supported", NULL); - return TCL_ERROR; -#else - ctx = SSL_CTX_new(SSLv2_method()); break; -#endif - case TLS_SSL3: -#if defined(NO_SSL3) - Tcl_AppendResult(interp, "protocol not supported", NULL); - return TCL_ERROR; -#else - ctx = SSL_CTX_new(SSLv3_method()); break; -#endif - case TLS_TLS1: -#if defined(NO_TLS1) - Tcl_AppendResult(interp, "protocol not supported", NULL); - return TCL_ERROR; -#else - ctx = SSL_CTX_new(TLSv1_method()); break; -#endif - case TLS_TLS1_1: -#if defined(NO_TLS1_1) - Tcl_AppendResult(interp, "protocol not supported", NULL); - return TCL_ERROR; -#else - ctx = SSL_CTX_new(TLSv1_1_method()); break; -#endif - case TLS_TLS1_2: -#if defined(NO_TLS1_2) - Tcl_AppendResult(interp, "protocol not supported", NULL); - return TCL_ERROR; -#else - ctx = SSL_CTX_new(TLSv1_2_method()); break; -#endif - default: - break; - } - if (ctx == NULL) { - Tcl_AppendResult(interp, REASON(), (char *) NULL); - return TCL_ERROR; - } - ssl = SSL_new(ctx); - if (ssl == NULL) { - Tcl_AppendResult(interp, REASON(), (char *) NULL); - SSL_CTX_free(ctx); - return TCL_ERROR; - } - objPtr = Tcl_NewListObj( 0, NULL); - - if (!verbose) { - for (index = 0; ; index++) { - cp = (char*)SSL_get_cipher_list( ssl, index); - if (cp == NULL) break; - Tcl_ListObjAppendElement( interp, objPtr, - Tcl_NewStringObj( cp, -1) ); - } - } else { - sk = SSL_get_ciphers(ssl); - - for (index = 0; index < sk_SSL_CIPHER_num(sk); index++) { - register size_t i; - SSL_CIPHER_description( sk_SSL_CIPHER_value( sk, index), - buf, sizeof(buf)); - for (i = strlen(buf) - 1; i ; i--) { - if (buf[i] == ' ' || buf[i] == '\n' || - buf[i] == '\r' || buf[i] == '\t') { - buf[i] = '\0'; - } else { - break; - } - } - Tcl_ListObjAppendElement( interp, objPtr, - Tcl_NewStringObj( buf, -1) ); - } - } - SSL_free(ssl); - SSL_CTX_free(ctx); - - Tcl_SetObjResult( interp, objPtr); - return TCL_OK; -} - -/* - *------------------------------------------------------------------- - * - * HandshakeObjCmd -- - * - * This command is used to verify whether the handshake is complete - * or not. - * - * Results: - * A standard Tcl result. 1 means handshake complete, 0 means pending. - * - * Side effects: - * May force SSL negotiation to take place. - * - *------------------------------------------------------------------- - */ - -static int -HandshakeObjCmd(clientData, interp, objc, objv) - ClientData clientData; /* Not used. */ - Tcl_Interp *interp; - int objc; - Tcl_Obj *CONST objv[]; -{ - Tcl_Channel chan; /* The channel to set a mode on. */ - State *statePtr; /* client state for ssl socket */ - int ret = 1; - - if (objc != 2) { - Tcl_WrongNumArgs(interp, 1, objv, "channel"); - return TCL_ERROR; - } - - chan = Tcl_GetChannel(interp, Tcl_GetStringFromObj(objv[1], NULL), NULL); - if (chan == (Tcl_Channel) NULL) { - return TCL_ERROR; - } - if (channelTypeVersion == TLS_CHANNEL_VERSION_2) { - /* - * Make sure to operate on the topmost channel - */ - chan = Tcl_GetTopChannel(chan); - } - if (Tcl_GetChannelType(chan) != Tls_ChannelType()) { - Tcl_AppendResult(interp, "bad channel \"", Tcl_GetChannelName(chan), - "\": not a TLS channel", NULL); - return TCL_ERROR; - } - statePtr = (State *)Tcl_GetChannelInstanceData(chan); - - if (!SSL_is_init_finished(statePtr->ssl)) { - int err; - ret = Tls_WaitForConnect(statePtr, &err); - if ((statePtr->flags & TLS_TCL_ASYNC) && err == EAGAIN) { - ret = 0; - } - if (ret < 0) { - CONST char *errStr = statePtr->err; - Tcl_ResetResult(interp); - Tcl_SetErrno(err); - - if (!errStr || *errStr == 0) { - errStr = Tcl_PosixError(interp); - } - - Tcl_AppendResult(interp, "handshake failed: ", errStr, - (char *) NULL); - return TCL_ERROR; - } - } - - Tcl_SetObjResult(interp, Tcl_NewIntObj(ret)); - return TCL_OK; -} - -/* - *------------------------------------------------------------------- - * - * ImportObjCmd -- - * - * This procedure is invoked to process the "ssl" command - * - * The ssl command pushes SSL over a (newly connected) tcp socket - * - * Results: - * A standard Tcl result. - * - * Side effects: - * May modify the behavior of an IO channel. - * - *------------------------------------------------------------------- - */ - -static int -ImportObjCmd(clientData, interp, objc, objv) - ClientData clientData; /* Not used. */ - Tcl_Interp *interp; - int objc; - Tcl_Obj *CONST objv[]; -{ - Tcl_Channel chan; /* The channel to set a mode on. */ - State *statePtr; /* client state for ssl socket */ - SSL_CTX *ctx = NULL; - Tcl_Obj *script = NULL; - Tcl_Obj *password = NULL; - int idx, len; - int flags = TLS_TCL_INIT; - int server = 0; /* is connection incoming or outgoing? */ - char *key = NULL; - char *cert = NULL; - char *ciphers = NULL; - char *CAfile = NULL; - char *CAdir = NULL; - char *DHparams = NULL; - char *model = NULL; -#ifndef OPENSSL_NO_TLSEXT - char *servername = NULL; /* hostname for Server Name Indication */ -#endif -#if defined(NO_SSL2) - int ssl2 = 0; -#else - int ssl2 = 1; -#endif -#if defined(NO_SSL3) - int ssl3 = 0; -#else - int ssl3 = 1; -#endif - int tls1 = 1; - int tls1_1 = 1; - int tls1_2 = 1; - int proto = 0; - int verify = 0, require = 0, request = 1; - - if (objc < 2) { - Tcl_WrongNumArgs(interp, 1, objv, "channel ?options?"); - return TCL_ERROR; - } - - chan = Tcl_GetChannel(interp, Tcl_GetStringFromObj(objv[1], NULL), NULL); - if (chan == (Tcl_Channel) NULL) { - return TCL_ERROR; - } - if (channelTypeVersion == TLS_CHANNEL_VERSION_2) { - /* - * Make sure to operate on the topmost channel - */ - chan = Tcl_GetTopChannel(chan); - } - - for (idx = 2; idx < objc; idx++) { - char *opt = Tcl_GetStringFromObj(objv[idx], NULL); - - if (opt[0] != '-') - break; - - OPTSTR( "-cadir", CAdir); - OPTSTR( "-cafile", CAfile); - OPTSTR( "-certfile", cert); - OPTSTR( "-cipher", ciphers); - OPTOBJ( "-command", script); - OPTSTR( "-dhparams", DHparams); - OPTSTR( "-keyfile", key); - OPTSTR( "-model", model); - OPTOBJ( "-password", password); - OPTBOOL( "-require", require); - OPTBOOL( "-request", request); - OPTBOOL( "-server", server); -#ifndef OPENSSL_NO_TLSEXT - OPTSTR( "-servername", servername); -#endif - - OPTBOOL( "-ssl2", ssl2); - OPTBOOL( "-ssl3", ssl3); - OPTBOOL( "-tls1", tls1); - OPTBOOL( "-tls1.1", tls1_1); - OPTBOOL( "-tls1.2", tls1_2); - - OPTBAD( "option", "-cadir, -cafile, -certfile, -cipher, -command, -dhparams, -keyfile, -model, -password, -require, -request, -server, -servername, -ssl2, -ssl3, -tls1, -tls1.1 or -tls1.2"); - - return TCL_ERROR; - } - if (request) verify |= SSL_VERIFY_CLIENT_ONCE | SSL_VERIFY_PEER; - if (request && require) verify |= SSL_VERIFY_FAIL_IF_NO_PEER_CERT; - if (verify == 0) verify = SSL_VERIFY_NONE; - - proto |= (ssl2 ? TLS_PROTO_SSL2 : 0); - proto |= (ssl3 ? TLS_PROTO_SSL3 : 0); - proto |= (tls1 ? TLS_PROTO_TLS1 : 0); - proto |= (tls1_1 ? TLS_PROTO_TLS1_1 : 0); - proto |= (tls1_2 ? TLS_PROTO_TLS1_2 : 0); - - /* reset to NULL if blank string provided */ - if (cert && !*cert) cert = NULL; - if (key && !*key) key = NULL; - if (ciphers && !*ciphers) ciphers = NULL; - if (CAfile && !*CAfile) CAfile = NULL; - if (CAdir && !*CAdir) CAdir = NULL; - if (DHparams && !*DHparams) DHparams = NULL; - - /* new SSL state */ - statePtr = (State *) ckalloc((unsigned) sizeof(State)); - memset(statePtr, 0, sizeof(State)); - - statePtr->flags = flags; - statePtr->interp = interp; - statePtr->vflags = verify; - statePtr->err = ""; - - /* allocate script */ - if (script) { - (void) Tcl_GetStringFromObj(script, &len); - if (len) { - statePtr->callback = script; - Tcl_IncrRefCount(statePtr->callback); - } - } - - /* allocate password */ - if (password) { - (void) Tcl_GetStringFromObj(password, &len); - if (len) { - statePtr->password = password; - Tcl_IncrRefCount(statePtr->password); - } - } - - if (model != NULL) { - int mode; - /* Get the "model" context */ - chan = Tcl_GetChannel(interp, model, &mode); - if (chan == (Tcl_Channel) NULL) { - Tls_Free((char *) statePtr); - return TCL_ERROR; - } - if (channelTypeVersion == TLS_CHANNEL_VERSION_2) { - /* - * Make sure to operate on the topmost channel - */ - chan = Tcl_GetTopChannel(chan); - } - if (Tcl_GetChannelType(chan) != Tls_ChannelType()) { - Tcl_AppendResult(interp, "bad channel \"", - Tcl_GetChannelName(chan), "\": not a TLS channel", NULL); - Tls_Free((char *) statePtr); - return TCL_ERROR; - } - ctx = ((State *)Tcl_GetChannelInstanceData(chan))->ctx; - } else { - if ((ctx = CTX_Init(statePtr, proto, key, cert, CAdir, CAfile, ciphers, - DHparams)) == (SSL_CTX*)0) { - Tls_Free((char *) statePtr); - return TCL_ERROR; - } - } - - statePtr->ctx = ctx; - - /* - * We need to make sure that the channel works in binary (for the - * encryption not to get goofed up). - * We only want to adjust the buffering in pre-v2 channels, where - * each channel in the stack maintained its own buffers. - */ - Tcl_SetChannelOption(interp, chan, "-translation", "binary"); - if (channelTypeVersion == TLS_CHANNEL_VERSION_1) { - Tcl_SetChannelOption(interp, chan, "-buffering", "none"); - } - - if (channelTypeVersion == TLS_CHANNEL_VERSION_2) { - statePtr->self = Tcl_StackChannel(interp, Tls_ChannelType(), - (ClientData) statePtr, (TCL_READABLE | TCL_WRITABLE), chan); - } else { - statePtr->self = chan; - Tcl_StackChannel(interp, Tls_ChannelType(), - (ClientData) statePtr, (TCL_READABLE | TCL_WRITABLE), chan); - } - if (statePtr->self == (Tcl_Channel) NULL) { - /* - * No use of Tcl_EventuallyFree because no possible Tcl_Preserve. - */ - Tls_Free((char *) statePtr); - return TCL_ERROR; - } - - /* - * SSL Initialization - */ - - statePtr->ssl = SSL_new(statePtr->ctx); - if (!statePtr->ssl) { - /* SSL library error */ - Tcl_AppendResult(interp, "couldn't construct ssl session: ", REASON(), - (char *) NULL); - Tls_Free((char *) statePtr); - return TCL_ERROR; - } - -#ifndef OPENSSL_NO_TLSEXT - if (servername) { - if (!SSL_set_tlsext_host_name(statePtr->ssl, servername) && require) { - Tcl_AppendResult(interp, "setting TLS host name extension failed", - (char *) NULL); - Tls_Free((char *) statePtr); - return TCL_ERROR; - } - } -#endif - - /* - * SSL Callbacks - */ - - SSL_set_app_data(statePtr->ssl, (VOID *)statePtr); /* point back to us */ - - SSL_set_verify(statePtr->ssl, verify, VerifyCallback); - - SSL_CTX_set_info_callback(statePtr->ctx, InfoCallback); - - /* Create Tcl_Channel BIO Handler */ - statePtr->p_bio = BIO_new_tcl(statePtr, BIO_CLOSE); - statePtr->bio = BIO_new(BIO_f_ssl()); - - if (server) { - statePtr->flags |= TLS_TCL_SERVER; - SSL_set_accept_state(statePtr->ssl); - } else { - SSL_set_connect_state(statePtr->ssl); - } - SSL_set_bio(statePtr->ssl, statePtr->p_bio, statePtr->p_bio); - BIO_set_ssl(statePtr->bio, statePtr->ssl, BIO_NOCLOSE); - - /* - * End of SSL Init - */ - Tcl_SetResult(interp, (char *) Tcl_GetChannelName(statePtr->self), - TCL_VOLATILE); - return TCL_OK; -} - -/* - *------------------------------------------------------------------- - * - * UnimportObjCmd -- - * - * This procedure is invoked to remove the topmost channel filter. - * - * Results: - * A standard Tcl result. - * - * Side effects: - * May modify the behavior of an IO channel. - * - *------------------------------------------------------------------- - */ - -static int -UnimportObjCmd(clientData, interp, objc, objv) - ClientData clientData; /* Not used. */ - Tcl_Interp *interp; - int objc; - Tcl_Obj *CONST objv[]; -{ - Tcl_Channel chan; /* The channel to set a mode on. */ - - if (objc != 2) { - Tcl_WrongNumArgs(interp, 1, objv, "channel"); - return TCL_ERROR; - } - - chan = Tcl_GetChannel(interp, Tcl_GetString(objv[1]), NULL); - if (chan == (Tcl_Channel) NULL) { - return TCL_ERROR; - } - - if (channelTypeVersion == TLS_CHANNEL_VERSION_2) { - /* - * Make sure to operate on the topmost channel - */ - chan = Tcl_GetTopChannel(chan); - } - - if (Tcl_GetChannelType(chan) != Tls_ChannelType()) { - Tcl_AppendResult(interp, "bad channel \"", Tcl_GetChannelName(chan), - "\": not a TLS channel", NULL); - return TCL_ERROR; - } - - if (Tcl_UnstackChannel(interp, chan) == TCL_ERROR) { - return TCL_ERROR; - } - - return TCL_OK; -} - -/* - *------------------------------------------------------------------- - * - * CTX_Init -- construct a SSL_CTX instance - * - * Results: - * A valid SSL_CTX instance or NULL. - * - * Side effects: - * constructs SSL context (CTX) - * - *------------------------------------------------------------------- - */ - -static SSL_CTX * -CTX_Init(statePtr, proto, key, cert, CAdir, CAfile, ciphers, DHparams) - State *statePtr; - int proto; - char *key; - char *cert; - char *CAdir; - char *CAfile; - char *ciphers; - char *DHparams; -{ - Tcl_Interp *interp = statePtr->interp; - SSL_CTX *ctx = NULL; - Tcl_DString ds; - Tcl_DString ds1; - int off = 0; - const SSL_METHOD *method; - - if (!proto) { - Tcl_AppendResult(interp, "no valid protocol selected", NULL); - return (SSL_CTX *)0; - } - - /* create SSL context */ -#if defined(NO_SSL2) - if (ENABLED(proto, TLS_PROTO_SSL2)) { - Tcl_AppendResult(interp, "protocol not supported", NULL); - return (SSL_CTX *)0; - } -#endif -#if defined(NO_SSL3) - if (ENABLED(proto, TLS_PROTO_SSL3)) { - Tcl_AppendResult(interp, "protocol not supported", NULL); - return (SSL_CTX *)0; - } -#endif -#if defined(NO_TLS1) - if (ENABLED(proto, TLS_PROTO_TLS1)) { - Tcl_AppendResult(interp, "protocol not supported", NULL); - return (SSL_CTX *)0; - } -#endif -#if defined(NO_TLS1_1) - if (ENABLED(proto, TLS_PROTO_TLS1_1)) { - Tcl_AppendResult(interp, "protocol not supported", NULL); - return (SSL_CTX *)0; - } -#endif -#if defined(NO_TLS1_2) - if (ENABLED(proto, TLS_PROTO_TLS1_2)) { - Tcl_AppendResult(interp, "protocol not supported", NULL); - return (SSL_CTX *)0; - } -#endif - - switch (proto) { -#if !defined(NO_SSL2) - case TLS_PROTO_SSL2: - method = SSLv2_method (); - break; -#endif -#if !defined(NO_SSL3) - case TLS_PROTO_SSL3: - method = SSLv3_method (); - break; -#endif -#if !defined(NO_TLS1) - case TLS_PROTO_TLS1: - method = TLSv1_method (); - break; -#endif -#if !defined(NO_TLS1_1) - case TLS_PROTO_TLS1_1: - method = TLSv1_1_method (); - break; -#endif -#if !defined(NO_TLS1_2) - case TLS_PROTO_TLS1_2: - method = TLSv1_2_method (); - break; -#endif - default: - method = SSLv23_method (); -#if !defined(NO_SSL2) - off |= (ENABLED(proto, TLS_PROTO_SSL2) ? 0 : SSL_OP_NO_SSLv2); -#endif -#if !defined(NO_SSL3) - off |= (ENABLED(proto, TLS_PROTO_SSL3) ? 0 : SSL_OP_NO_SSLv3); -#endif -#if !defined(NO_TLS1) - off |= (ENABLED(proto, TLS_PROTO_TLS1) ? 0 : SSL_OP_NO_TLSv1); -#endif -#if !defined(NO_TLS1_1) - off |= (ENABLED(proto, TLS_PROTO_TLS1_1) ? 0 : SSL_OP_NO_TLSv1_1); -#endif -#if !defined(NO_TLS1_2) - off |= (ENABLED(proto, TLS_PROTO_TLS1_2) ? 0 : SSL_OP_NO_TLSv1_2); -#endif - break; - } - - ctx = SSL_CTX_new (method); - - SSL_CTX_set_app_data( ctx, (VOID*)interp); /* remember the interpreter */ - SSL_CTX_set_options( ctx, SSL_OP_ALL); /* all SSL bug workarounds */ - SSL_CTX_set_options( ctx, off); /* all SSL bug workarounds */ - SSL_CTX_sess_set_cache_size( ctx, 128); - - if (ciphers != NULL) - SSL_CTX_set_cipher_list(ctx, ciphers); - - /* set some callbacks */ - SSL_CTX_set_default_passwd_cb(ctx, PasswordCallback); - -#ifndef BSAFE - SSL_CTX_set_default_passwd_cb_userdata(ctx, (void *)statePtr); -#endif - - /* read a Diffie-Hellman parameters file, or use the built-in one */ -#ifdef OPENSSL_NO_DH - if (DHparams != NULL) { - Tcl_AppendResult(interp, - "DH parameter support not available", (char *) NULL); - SSL_CTX_free(ctx); - return (SSL_CTX *)0; - } -#else - { - DH* dh; - if (DHparams != NULL) { - BIO *bio; - Tcl_DStringInit(&ds); - bio = BIO_new_file(F2N(DHparams, &ds), "r"); - if (!bio) { - Tcl_DStringFree(&ds); - Tcl_AppendResult(interp, - "Could not find DH parameters file", (char *) NULL); - SSL_CTX_free(ctx); - return (SSL_CTX *)0; - } - - dh = PEM_read_bio_DHparams(bio, NULL, NULL, NULL); - BIO_free(bio); - Tcl_DStringFree(&ds); - if (!dh) { - Tcl_AppendResult(interp, - "Could not read DH parameters from file", (char *) NULL); - SSL_CTX_free(ctx); - return (SSL_CTX *)0; - } - } else { - dh = get_dh2048(); - } - SSL_CTX_set_tmp_dh(ctx, dh); - DH_free(dh); - } -#endif - - /* set our certificate */ - if (cert != NULL) { - Tcl_DStringInit(&ds); - - if (SSL_CTX_use_certificate_file(ctx, F2N( cert, &ds), - SSL_FILETYPE_PEM) <= 0) { - Tcl_DStringFree(&ds); - Tcl_AppendResult(interp, - "unable to set certificate file ", cert, ": ", - REASON(), (char *) NULL); - SSL_CTX_free(ctx); - return (SSL_CTX *)0; - } - - /* get the private key associated with this certificate */ - if (key == NULL) key=cert; - - if (SSL_CTX_use_PrivateKey_file(ctx, F2N( key, &ds), - SSL_FILETYPE_PEM) <= 0) { - Tcl_DStringFree(&ds); - /* flush the passphrase which might be left in the result */ - Tcl_SetResult(interp, NULL, TCL_STATIC); - Tcl_AppendResult(interp, - "unable to set public key file ", key, " ", - REASON(), (char *) NULL); - SSL_CTX_free(ctx); - return (SSL_CTX *)0; - } - Tcl_DStringFree(&ds); - /* Now we know that a key and cert have been set against - * the SSL context */ - if (!SSL_CTX_check_private_key(ctx)) { - Tcl_AppendResult(interp, - "private key does not match the certificate public key", - (char *) NULL); - SSL_CTX_free(ctx); - return (SSL_CTX *)0; - } - } else { - cert = (char*)X509_get_default_cert_file(); - - if (SSL_CTX_use_certificate_file(ctx, cert, - SSL_FILETYPE_PEM) <= 0) { -#if 0 - Tcl_DStringFree(&ds); - Tcl_AppendResult(interp, - "unable to use default certificate file ", cert, ": ", - REASON(), (char *) NULL); - SSL_CTX_free(ctx); - return (SSL_CTX *)0; -#endif - } - } - - Tcl_DStringInit(&ds); - Tcl_DStringInit(&ds1); - if (!SSL_CTX_load_verify_locations(ctx, F2N(CAfile, &ds), F2N(CAdir, &ds1)) || - !SSL_CTX_set_default_verify_paths(ctx)) { -#if 0 - Tcl_DStringFree(&ds); - Tcl_DStringFree(&ds1); - /* Don't currently care if this fails */ - Tcl_AppendResult(interp, "SSL default verify paths: ", - REASON(), (char *) NULL); - SSL_CTX_free(ctx); - return (SSL_CTX *)0; -#endif - } - - /* https://sourceforge.net/p/tls/bugs/57/ */ - if ( CAfile != NULL ) { - STACK_OF(X509_NAME) *certNames = SSL_load_client_CA_file( F2N(CAfile, &ds) ); - if ( certNames != NULL ) { - SSL_CTX_set_client_CA_list(ctx, certNames ); - } - } - - Tcl_DStringFree(&ds); - Tcl_DStringFree(&ds1); - return ctx; -} - -/* - *------------------------------------------------------------------- - * - * StatusObjCmd -- return certificate for connected peer. - * - * Results: - * A standard Tcl result. - * - * Side effects: - * None. - * - *------------------------------------------------------------------- - */ -static int -StatusObjCmd(clientData, interp, objc, objv) - ClientData clientData; /* Not used. */ - Tcl_Interp *interp; - int objc; - Tcl_Obj *CONST objv[]; -{ - State *statePtr; - X509 *peer; - Tcl_Obj *objPtr; - Tcl_Channel chan; - char *channelName, *ciphers; - int mode; - - switch (objc) { - case 2: - channelName = Tcl_GetStringFromObj(objv[1], NULL); - break; - - case 3: - if (!strcmp (Tcl_GetString (objv[1]), "-local")) { - channelName = Tcl_GetStringFromObj(objv[2], NULL); - break; - } - /* else fall... */ - default: - Tcl_WrongNumArgs(interp, 1, objv, "?-local? channel"); - return TCL_ERROR; - } - - chan = Tcl_GetChannel(interp, channelName, &mode); - if (chan == (Tcl_Channel) NULL) { - return TCL_ERROR; - } - if (channelTypeVersion == TLS_CHANNEL_VERSION_2) { - /* - * Make sure to operate on the topmost channel - */ - chan = Tcl_GetTopChannel(chan); - } - if (Tcl_GetChannelType(chan) != Tls_ChannelType()) { - Tcl_AppendResult(interp, "bad channel \"", Tcl_GetChannelName(chan), - "\": not a TLS channel", NULL); - return TCL_ERROR; - } - statePtr = (State *) Tcl_GetChannelInstanceData(chan); - if (objc == 2) { - peer = SSL_get_peer_certificate(statePtr->ssl); - } else { - peer = SSL_get_certificate(statePtr->ssl); - } - if (peer) { - objPtr = Tls_NewX509Obj(interp, peer); - if (objc == 2) { X509_free(peer); } - } else { - objPtr = Tcl_NewListObj(0, NULL); - } - - Tcl_ListObjAppendElement (interp, objPtr, - Tcl_NewStringObj ("sbits", -1)); - Tcl_ListObjAppendElement (interp, objPtr, - Tcl_NewIntObj (SSL_get_cipher_bits (statePtr->ssl, NULL))); - - ciphers = (char*)SSL_get_cipher(statePtr->ssl); - if (ciphers != NULL && strcmp(ciphers, "(NONE)")!=0) { - Tcl_ListObjAppendElement(interp, objPtr, - Tcl_NewStringObj("cipher", -1)); - Tcl_ListObjAppendElement(interp, objPtr, - Tcl_NewStringObj(SSL_get_cipher(statePtr->ssl), -1)); - } - Tcl_SetObjResult( interp, objPtr); - return TCL_OK; -} - -/* - *------------------------------------------------------------------- - * - * VersionObjCmd -- return version string from OpenSSL. - * - * Results: - * A standard Tcl result. - * - * Side effects: - * None. - * - *------------------------------------------------------------------- - */ -static int -VersionObjCmd(clientData, interp, objc, objv) - ClientData clientData; /* Not used. */ - Tcl_Interp *interp; - int objc; - Tcl_Obj *CONST objv[]; -{ - Tcl_Obj *objPtr; - - objPtr = Tcl_NewStringObj(OPENSSL_VERSION_TEXT, -1); - - Tcl_SetObjResult(interp, objPtr); - return TCL_OK; -} - -/* - *------------------------------------------------------------------- - * - * MiscObjCmd -- misc commands - * - * Results: - * A standard Tcl result. - * - * Side effects: - * None. - * - *------------------------------------------------------------------- - */ -static int -MiscObjCmd(clientData, interp, objc, objv) - ClientData clientData; /* Not used. */ - Tcl_Interp *interp; - int objc; - Tcl_Obj *CONST objv[]; -{ - static CONST84 char *commands [] = { "req", NULL }; - enum command { C_REQ, C_DUMMY }; - int cmd; - - if (objc < 2) { - Tcl_WrongNumArgs(interp, 1, objv, "subcommand ?args?"); - return TCL_ERROR; - } - if (Tcl_GetIndexFromObj(interp, objv[1], commands, - "command", 0,&cmd) != TCL_OK) { - return TCL_ERROR; - } - - switch ((enum command) cmd) { - case C_REQ: { - EVP_PKEY *pkey=NULL; - X509 *cert=NULL; - X509_NAME *name=NULL; - Tcl_Obj **listv; - int listc,i; - - BIO *out=NULL; - - char *k_C="",*k_ST="",*k_L="",*k_O="",*k_OU="",*k_CN="",*k_Email=""; - char *keyout,*pemout,*str; - int keysize,serial=0,days=365; - - if ((objc<5) || (objc>6)) { - Tcl_WrongNumArgs(interp, 2, objv, "keysize keyfile certfile ?info?"); - return TCL_ERROR; - } - - if (Tcl_GetIntFromObj(interp, objv[2], &keysize) != TCL_OK) { - return TCL_ERROR; - } - keyout=Tcl_GetString(objv[3]); - pemout=Tcl_GetString(objv[4]); - - if (objc>=6) { - if (Tcl_ListObjGetElements(interp, objv[5], - &listc, &listv) != TCL_OK) { - return TCL_ERROR; - } - - if ((listc%2) != 0) { - Tcl_SetResult(interp,"Information list must have even number of arguments",NULL); - return TCL_ERROR; - } - for (i=0; itimer != (Tcl_TimerToken) NULL) { - Tcl_DeleteTimerHandler(statePtr->timer); - statePtr->timer = NULL; - } - - if (statePtr->bio) { - /* This will call SSL_shutdown. Bug 1414045 */ - dprintf(stderr, "BIO_free_all(%p)\n", statePtr->bio); - BIO_free_all(statePtr->bio); - statePtr->bio = NULL; - } - if (statePtr->ssl) { - dprintf(stderr, "SSL_free(%p)\n", statePtr->ssl); - SSL_free(statePtr->ssl); - statePtr->ssl = NULL; - } - if (statePtr->ctx) { - SSL_CTX_free(statePtr->ctx); - statePtr->ctx = NULL; - } - if (statePtr->callback) { - Tcl_DecrRefCount(statePtr->callback); - statePtr->callback = NULL; - } - if (statePtr->password) { - Tcl_DecrRefCount(statePtr->password); - statePtr->password = NULL; - } -} - -/* - *------------------------------------------------------------------- - * - * Tls_Init -- - * - * This is a package initialization procedure, which is called - * by Tcl when this package is to be added to an interpreter. - * - * Results: Ssl configured and loaded - * - * Side effects: - * create the ssl command, initialise ssl context - * - *------------------------------------------------------------------- - */ - -int -Tls_Init(Tcl_Interp *interp) /* Interpreter in which the package is - * to be made available. */ -{ - int major, minor, patchlevel, release; - - /* - * The original 8.2.0 stacked channel implementation (and the patch - * that preceded it) had problems with scalability and robustness. - * These were address in 8.3.2 / 8.4a2, so we now require that as a - * minimum for TLS 1.4+. We only support 8.2+ now (8.3.2+ preferred). - */ - if ( -#ifdef USE_TCL_STUBS - Tcl_InitStubs(interp, "8.2", 0) -#else - Tcl_PkgRequire(interp, "Tcl", "8.2", 0) -#endif - == NULL) { - return TCL_ERROR; - } - - /* - * Get the version so we can runtime switch on available functionality. - * TLS should really only be used in 8.3.2+, but the other works for - * some limited functionality, so an attempt at support is made. - */ - Tcl_GetVersion(&major, &minor, &patchlevel, &release); - if ((major > 8) || ((major == 8) && ((minor > 3) || ((minor == 3) && - (release == TCL_FINAL_RELEASE) && (patchlevel >= 2))))) { - /* 8.3.2+ */ - channelTypeVersion = TLS_CHANNEL_VERSION_2; - } else { - /* 8.2.0 - 8.3.1 */ - channelTypeVersion = TLS_CHANNEL_VERSION_1; - } - - if (TlsLibInit() != TCL_OK) { - Tcl_AppendResult(interp, "could not initialize SSL library", NULL); - return TCL_ERROR; - } - - Tcl_CreateObjCommand(interp, "tls::ciphers", CiphersObjCmd, - (ClientData) 0, (Tcl_CmdDeleteProc *) NULL); - - Tcl_CreateObjCommand(interp, "tls::handshake", HandshakeObjCmd, - (ClientData) 0, (Tcl_CmdDeleteProc *) NULL); - - Tcl_CreateObjCommand(interp, "tls::import", ImportObjCmd, - (ClientData) 0, (Tcl_CmdDeleteProc *) NULL); - - Tcl_CreateObjCommand(interp, "tls::unimport", UnimportObjCmd, - (ClientData) 0, (Tcl_CmdDeleteProc *) NULL); - - Tcl_CreateObjCommand(interp, "tls::status", StatusObjCmd, - (ClientData) 0, (Tcl_CmdDeleteProc *) NULL); - - Tcl_CreateObjCommand(interp, "tls::version", VersionObjCmd, - (ClientData) 0, (Tcl_CmdDeleteProc *) NULL); - - Tcl_CreateObjCommand(interp, "tls::misc", MiscObjCmd, - (ClientData) 0, (Tcl_CmdDeleteProc *) NULL); - - return Tcl_PkgProvide(interp, PACKAGE_NAME, PACKAGE_VERSION); -} - -/* - *------------------------------------------------------* - * - * Tls_SafeInit -- - * - * ------------------------------------------------* - * Standard procedure required by 'load'. - * Initializes this extension for a safe interpreter. - * ------------------------------------------------* - * - * Sideeffects: - * As of 'Tls_Init' - * - * Result: - * A standard Tcl error code. - * - *------------------------------------------------------* - */ - -int -Tls_SafeInit (Tcl_Interp* interp) -{ - return Tls_Init (interp); -} - - -/* - *------------------------------------------------------* - * - * TlsLibInit -- - * - * ------------------------------------------------* - * Initializes SSL library once per application - * ------------------------------------------------* - * - * Side effects: - * initilizes SSL library - * - * Result: - * none - * - *------------------------------------------------------* - */ -static int -TlsLibInit () -{ - int i; - char rnd_seed[16] = "GrzSlplKqUdnnzP!"; /* 16 bytes */ -#if defined(OPENSSL_THREADS) && defined(TCL_THREADS) - size_t num_locks; -#endif - int status=TCL_OK; - - if (!initialized) { - Tcl_MutexLock(&init_mx); - if (!initialized) { - initialized = 1; - - if (CRYPTO_set_mem_functions((void *(*)(size_t))Tcl_Alloc, - (void *(*)(void *, size_t))Tcl_Realloc, - (void(*)(void *))Tcl_Free) == 0) { - /* Not using Tcl's mem functions ... not critical */ - } - -#if defined(OPENSSL_THREADS) && defined(TCL_THREADS) - /* should we consider allocating mutexes? */ - num_locks = CRYPTO_num_locks(); - if (num_locks > CRYPTO_NUM_LOCKS) { - status=TCL_ERROR; - goto done; - } - - CRYPTO_set_locking_callback(CryptoThreadLockCallback); - CRYPTO_set_id_callback(CryptoThreadIdCallback); -#endif - - if (SSL_library_init() != 1) { - status=TCL_ERROR; - goto done; - } - SSL_load_error_strings(); - ERR_load_crypto_strings(); - - /* - * Seed the random number generator in the SSL library, - * using the do/while construct because of the bug note in the - * OpenSSL FAQ at http://www.openssl.org/support/faq.html#USER1 - * - * The crux of the problem is that Solaris 7 does not have a - * /dev/random or /dev/urandom device so it cannot gather enough - * entropy from the RAND_seed() when TLS initializes and refuses - * to go further. Earlier versions of OpenSSL carried on regardless. - */ - srand((unsigned int) time((time_t *) NULL)); - do { - for (i = 0; i < 16; i++) { - rnd_seed[i] = 1 + (char) (255.0 * rand()/(RAND_MAX+1.0)); - } - RAND_seed(rnd_seed, sizeof(rnd_seed)); - } while (RAND_status() != 1); - } - done: - - Tcl_MutexUnlock(&init_mx); - } - return status; -} diff --git a/tls/tls.h b/tls/tls.h deleted file mode 100644 index 9707515..0000000 --- a/tls/tls.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Copyright (C) 1997-2000 Matt Newman - * - * $Header: /cvsroot/tls/tls/tls.h,v 1.2 2000/01/20 01:59:38 aborr Exp $ - * - * TLS (aka SSL) Channel - can be layered on any bi-directional - * Tcl_Channel (Note: Requires Trf Core Patch) - * - * This was built from scratch based upon observation of OpenSSL 0.9.2B - * - * Addition credit is due for Andreas Kupries (a.kupries@westend.com), for - * providing the Tcl_ReplaceChannel mechanism and working closely with me - * to enhance it to support full fileevent semantics. - * - * Also work done by the follow people provided the impetus to do this "right":- - * tclSSL (Colin McCormack, Shared Technology) - * SSLtcl (Peter Antman) - * - */ -#ifndef _TLS_H -#define _TLS_H - -#include /* Internal definitions for Tcl. */ - -#ifdef TCL_STORAGE_CLASS -# undef TCL_STORAGE_CLASS -#endif -#ifdef BUILD_tls -# define TCL_STORAGE_CLASS DLLEXPORT -#else -# define TCL_STORAGE_CLASS DLLIMPORT -#endif - -/* - * Forward declarations - */ - -EXTERN int Tls_Init _ANSI_ARGS_ ((Tcl_Interp *)); -EXTERN int Tls_SafeInit _ANSI_ARGS_ ((Tcl_Interp *)); - -#endif /* _TLS_H */ diff --git a/tls/tls.htm b/tls/tls.htm deleted file mode 100644 index ab47d4d..0000000 --- a/tls/tls.htm +++ /dev/null @@ -1,432 +0,0 @@ - - - - - - - -TLS (SSL) Tcl Commands - - - - -
-
NAME
-
tls - binding to OpenSSL - toolkit.
-
-
-
SYNOPSIS
-
-
package require Tcl ?8.4?
-
package require tls ?1.6?
-
 
-
tls::init ?options?
-
tls::socket ?options? host port
-
tls::socket ?-server command? - ?options? port
-
tls::handshake channel
-
tls::status ?-local? channel
-
tls::import channel ?options?
-
tls::unimport channel
-
tls::ciphers protocol ?verbose?
-
tls::version
-
-
-
COMMANDS
-
CALLBACK OPTIONS
-
HTTPS EXAMPLE
-
SPECIAL CONSIDERATIONS
-
SEE ALSO
-
- -
- -

NAME

- -

tls - binding to OpenSSL -toolkit.

- -

SYNOPSIS

- -

package require Tcl 8.4
-package require tls 1.6
-
-tls::init ?options?
-tls::socket ?options? host -port
-tls::socket ?-server command? ?options? port
-tls::status ?-local? channel
-tls::handshake channel
-
-tls::import channel ?options?
-tls::unimport channel
-tls::ciphers -protocol ?verbose?
-tls::version -

- -

DESCRIPTION

- -

This extension provides a generic binding to OpenSSL, utilizing the -Tcl_StackChannel -API for Tcl 8.2 and higher. The sockets behave exactly the same -as channels created using Tcl's built-in socket -command with additional options for controlling the SSL session. -To use TLS with an earlier version of Tcl than 8.4, please obtain -TLS 1.3. -

- -

COMMANDS

- -

Typically one would use the tls::socket command -which provides compatibility with the native Tcl socket -command. In such cases tls::import should not be -used directly.

- -
-
tls::init ?options?
-
This routine sets the default options used by tls::socket - and is optional. If you call tls::import - directly this routine has no effect. Any of the options - that tls::socket accepts can be set - using this command, though you should limit your options - to only TLS related ones.
-
 
-
tls::socket ?options? - host port
-
tls::socket ?-server command? ?options? port
-
This is a helper function that utilizes the underlying - commands (tls::import). It behaves - exactly the same as the native Tcl socket - command except that the options can include any of the - applicable tls:import - options.
-
 
-
tls::handshake channel
-
Forces handshake to take place, and returns 0 if - handshake is still in progress (non-blocking), or 1 if - the handshake was successful. If the handshake failed - this routine will throw an error.
-
 
-
tls::status - ?-local? channel
-
Returns the current security status of an SSL channel. The - result is a list of key-value pairs describing the - connected peer. If the result is an empty list then the - SSL handshake has not yet completed. - If -local is given, then the certificate information - is the one used locally.
-
- -
-
-
issuer dn
-
The distinguished name (DN) of the certificate - issuer.
-
subject dn
-
The distinguished name (DN) of the certificate - subject.
-
notBefore date
-
The begin date for the validity of the certificate.
-
notAfter date
-
The expiry date for the certificate.
-
serial n
-
The serial number of the certificate.
-
cipher cipher
-
The current cipher in use between the client and - server channels.
-
sbits n
-
The number of bits used for the session key.
-
-
- -
-
tls::import channel - ?options?
-
SSL-enable a regular Tcl channel - it need not be a - socket, but must provide bi-directional flow. Also - setting session parameters for SSL handshake.
-
- -
-
-
-cadir dir
-
Provide the directory containing the CA certificates.
-
-cafile filename
-
Provide the CA file.
-
-certfile filename
-
Provide the certificate to use.
-
-cipher string
-
Provide the cipher suites to use. Syntax is as per - OpenSSL.
-
-command callback
-
If specified, this callback will be invoked at several points - during the OpenSSL handshake. It can pass errors and tracing - information, and it can allow Tcl scripts to perform - their own validation of the certificate in place of the - default validation provided by OpenSSL. -
- See CALLBACK OPTIONS for - further discussion.
-
-dhparams filename
-
Provide a Diffie-Hellman parameters file.
-
-keyfile filename
-
Provide the private key file. (default: - value of -certfile)
-
-model channel
-
This will force this channel to share the same SSL_CTX - structure as the specified channel, and - therefore share callbacks etc.
-
-password callback
-
If supplied, this callback will be invoked when OpenSSL needs - to obtain a password, typically to unlock the private key of - a certificate. - The callback should return a string which represents the - password to be used. -
- See CALLBACK OPTIONS for - further discussion.
-
-request bool
-
Request a certificate from peer during SSL handshake. - (default: true)
-
-require bool
-
Require a valid certificate from peer during SSL - handshake. If this is set to true then -request - must also be set to true. (default: false)
-
-server bool
-
Handshake as server if true, else handshake as - client.(default: false)
-
-servername host
-
Only available if the OpenSSL library the package is linked - against supports the TLS hostname extension for 'Server Name - Indication' (SNI). Use to name the logical host we are talking - to and expecting a certificate for
-
-ssl2 bool
-
Enable use of SSL v2. (default: true - unless -DNO_PATENTS was specified in build)
-
-ssl3 bool
-
Enable use of SSL v3. (default: true)
-
-tls1 bool
-
Enable use of TLS v1. (default: false)
-
-
- -
-
tls::unimport channel
-
Provided for symmetry to tls::import, this - unstacks the SSL-enabling of a regular Tcl channel. An error - is thrown if TLS is not the top stacked channel type.
-
- -
-
tls::ciphers - protocol ?verbose?
-
Returns list of supported ciphers based on the protocol - you supply, which must be one of ssl2, ssl3, or tls1. - If verbose is specified as true then a verbose, - semi-human readable list is returned providing additional - information on the nature of the cipher support. In each - case the result is a Tcl list.
-
- -
-
tls::version
-
Returns the version string defined by OpenSSL.
-
- -

CALLBACK OPTIONS

- -

-As indicated above, individual channels can be given their own callbacks -to handle intermediate processing by the OpenSSL library, using the --command and -password options passed to either of -tls::socket or tls::import. -

- -
-
- -
-command callback
-
- Invokes the specified callback script at - several points during the OpenSSL handshake. - Except as indicated below, values returned from the - callback are ignored. - Arguments appended to the script upon callback take one of the - following forms: - -
-
- -
- - - -
- info channel major minor message -
-
- This form of callback is invoked by the OpenSSL function - SSL_CTX_set_info_callback(). -
- The major and minor arguments are used to - represent the state information bitmask. -
-
Possible values for major are:
-
handshake, alert, connect, accept.
-
Possible values for minor are:
-
start, done, read, write, loop, exit.
-
- The message argument is a descriptive string which may - be generated either by - SSL_state_string_long() or by - SSL_alert_desc_string_long(), - depending on context. -
- -
- -
- verify channel depth cert status error -
-
- This form of callback is invoked by the OpenSSL function - SSL_set_verify(). -
- The depth argument is an integer representing the - current depth on the certificate chain, with - 0 as the subject certificate and higher values - denoting progressively more indirect issuer certificates. -
- The cert argument is a list of key-value pairs similar - to those returned by - tls::status. -
- The status argument is an integer representing the - current validity of the certificate. - A value of 0 means the certificate is deemed invalid. - A value of 1 means the certificate is deemed valid. -
- The error argument supplies the message, if any, generated - by - X509_STORE_CTX_get_error(). -
-
- The callback may override normal validation processing by explicitly - returning one of the above status values. -
- -
-
- -
- -
-password callback
-
- Invokes the specified callback script when OpenSSL needs to - obtain a password. The callback should return a string which - represents the password to be used. - No arguments are appended to the script upon callback. -
-
-
- -

-Reference implementations of these callbacks are provided in the -distribution as tls::callback and -tls::password respectively. Note that these are -sample implementations only. In a more realistic deployment -you would specify your own callback scripts on each TLS channel -using the -command and -password options. -

- -

-The default behavior when the -command option is not specified is for -TLS to process the associated library callbacks internally. -The default behavior when the -password option is not specified is for -TLS to process the associated library callbacks by attempting to call -tls::password. -The difference between these two behaviors is a consequence of maintaining -compatibility with earlier implementations. -

- -

-The tls::debug variable provides some additional -control over these reference callbacks. Its value is zero by default. -Higher values produce more diagnostic output, and will also force the -verify method in tls::callback to accept the -certificate, even when it is invalid. -

- -

- -The use of the reference callbacks tls::callback and -tls::password is not recommended. They may be removed -from future releases. - -

- -

- -The use of the variable tls::debug is not recommended. -It may be removed from future releases. - -

- -

HTTPS EXAMPLE

- -

This example uses a sample server.pem provided with the TLS release, -courtesy of the OpenSSL project.

- -

-package require http
-package require tls
-
-http::register https 443 [list ::tls::socket -require 1 -cafile ./server.pem]
-
-set tok [http::geturl https://developer.netscape.com/]
-
- -

SPECIAL CONSIDERATIONS

- -

The capabilities of this package can vary enormously based -upon how your OpenSSL library was configured and built. At the -most macro-level OpenSSL supports a "no patents" build, -which disables RSA, IDEA, RC(2,4,5) and SSL2 - if your OpenSSL is -configured this way then you will need to build TLS with the --DNO_PATENTS option - and the resultant module will function -correctly and also support ADH certificate-less encryption, -however you will be unable to utilize this to speak to normal Web -Servers, which typically require RSA support. Please see http://www.openssl.org/ for -more information on the whole issue of patents and US export -restrictions.

- -

SEE ALSO

- -

socket, fileevent, OpenSSL

- -
- -
-Copyright © 1999 Matt Newman.
-Copyright © 2004 Starfish Systems.
-
- - diff --git a/tls/tls.tcl b/tls/tls.tcl deleted file mode 100644 index 1d11e89..0000000 --- a/tls/tls.tcl +++ /dev/null @@ -1,271 +0,0 @@ -# -# Copyright (C) 1997-2000 Matt Newman -# -# $Header: /cvsroot/tls/tls/tls.tcl,v 1.14 2015/07/07 17:16:03 andreas_kupries Exp $ -# -package provide Tls 1.6 - -namespace eval tls { - variable logcmd tclLog - variable debug 0 - - # Default flags passed to tls::import - variable defaults {} - - # Maps UID to Server Socket - variable srvmap - variable srvuid 0 - - # Over-ride this if you are using a different socket command - variable socketCmd - if {![info exists socketCmd]} { - set socketCmd [info command ::socket] - } -} - -proc tls::initlib {dir dll} { - # Package index cd's into the package directory for loading. - # Irrelevant to unixoids, but for Windows this enables the OS to find - # the dependent DLL's in the CWD, where they may be. - set cwd [pwd] - catch {cd $dir} - if {[string equal $::tcl_platform(platform) "windows"] && - ![string equal [lindex [file system $dir] 0] "native"]} { - # If it is a wrapped executable running on windows, the openssl - # dlls must be copied out of the virtual filesystem to the disk - # where Windows will find them when resolving the dependency in - # the tls dll. We choose to make them siblings of the executable. - package require starkit - set dst [file nativename [file dirname $starkit::topdir]] - foreach sdll [glob -nocomplain -directory $dir -tails *eay32.dll] { - catch {file delete -force $dst/$sdll} - catch {file copy -force $dir/$sdll $dst/$sdll} - } - } - set res [catch {uplevel #0 [list load [file join [pwd] $dll]]} err] - catch {cd $cwd} - if {$res} { - namespace eval [namespace parent] {namespace delete tls} - return -code $res $err - } - rename tls::initlib {} -} - -# -# Backwards compatibility, also used to set the default -# context options -# -proc tls::init {args} { - variable defaults - - set defaults $args -} -# -# Helper function - behaves exactly as the native socket command. -# -proc tls::socket {args} { - variable socketCmd - variable defaults - set idx [lsearch $args -server] - if {$idx != -1} { - set server 1 - set callback [lindex $args [expr {$idx+1}]] - set args [lreplace $args $idx [expr {$idx+1}]] - - set usage "wrong # args: should be \"tls::socket -server command ?options? port\"" - set options "-cadir, -cafile, -certfile, -cipher, -command, -dhparams, -keyfile, -myaddr, -password, -request, -require, -servername, -ssl2, -ssl3, -tls1, -tls1.1 or -tls1.2" - } else { - set server 0 - - set usage "wrong # args: should be \"tls::socket ?options? host port\"" - set options "-async, -cadir, -cafile, -certfile, -cipher, -command, -dhparams, -keyfile, -myaddr, -myport, -password, -request, -require, -servername, -ssl2, -ssl3, -tls1, -tls1.1 or -tls1.2" - } - set argc [llength $args] - set sopts {} - set iopts [concat [list -server $server] $defaults] ;# Import options - - for {set idx 0} {$idx < $argc} {incr idx} { - set arg [lindex $args $idx] - switch -glob -- $server,$arg { - 0,-async {lappend sopts $arg} - 0,-myport - - *,-type - - *,-myaddr {lappend sopts $arg [lindex $args [incr idx]]} - *,-cadir - - *,-cafile - - *,-certfile - - *,-cipher - - *,-command - - *,-dhparams - - *,-keyfile - - *,-password - - *,-request - - *,-require - - *,-servername - - *,-ssl2 - - *,-ssl3 - - *,-tls1 - - *,-tls1.1 - - *,-tls1.2 {lappend iopts $arg [lindex $args [incr idx]]} - -* {return -code error "bad option \"$arg\": must be one of $options"} - default {break} - } - } - if {$server} { - if {($idx + 1) != $argc} { - return -code error $usage - } - set uid [incr ::tls::srvuid] - - set port [lindex $args [expr {$argc-1}]] - lappend sopts $port - #set sopts [linsert $sopts 0 -server $callback] - set sopts [linsert $sopts 0 -server [list tls::_accept $iopts $callback]] - #set sopts [linsert $sopts 0 -server [list tls::_accept $uid $callback]] - } else { - if {($idx + 2) != $argc} { - return -code error $usage - } - set host [lindex $args [expr {$argc-2}]] - set port [lindex $args [expr {$argc-1}]] - lappend sopts $host $port - } - # - # Create TCP/IP socket - # - set chan [eval $socketCmd $sopts] - if {!$server && [catch { - # - # Push SSL layer onto socket - # - eval [list tls::import] $chan $iopts - } err]} { - set info ${::errorInfo} - catch {close $chan} - return -code error -errorinfo $info $err - } - return $chan -} - -# tls::_accept -- -# -# This is the actual accept that TLS sockets use, which then calls -# the callback registered by tls::socket. -# -# Arguments: -# iopts tls::import opts -# callback server callback to invoke -# chan socket channel to accept/deny -# ipaddr calling IP address -# port calling port -# -# Results: -# Returns an error if the callback throws one. -# -proc tls::_accept { iopts callback chan ipaddr port } { - log 2 [list tls::_accept $iopts $callback $chan $ipaddr $port] - - set chan [eval [list tls::import $chan] $iopts] - - lappend callback $chan $ipaddr $port - if {[catch { - uplevel #0 $callback - } err]} { - log 1 "tls::_accept error: ${::errorInfo}" - close $chan - error $err $::errorInfo $::errorCode - } else { - log 2 "tls::_accept - called \"$callback\" succeeded" - } -} -# -# Sample callback for hooking: - -# -# error -# verify -# info -# -proc tls::callback {option args} { - variable debug - - #log 2 [concat $option $args] - - switch -- $option { - "error" { - foreach {chan msg} $args break - - log 0 "TLS/$chan: error: $msg" - } - "verify" { - # poor man's lassign - foreach {chan depth cert rc err} $args break - - array set c $cert - - if {$rc != "1"} { - log 1 "TLS/$chan: verify/$depth: Bad Cert: $err (rc = $rc)" - } else { - log 2 "TLS/$chan: verify/$depth: $c(subject)" - } - if {$debug > 0} { - return 1; # FORCE OK - } else { - return $rc - } - } - "info" { - # poor man's lassign - foreach {chan major minor state msg} $args break - - if {$msg != ""} { - append state ": $msg" - } - # For tracing - upvar #0 tls::$chan cb - set cb($major) $minor - - log 2 "TLS/$chan: $major/$minor: $state" - } - default { - return -code error "bad option \"$option\":\ - must be one of error, info, or verify" - } - } -} - -proc tls::xhandshake {chan} { - upvar #0 tls::$chan cb - - if {[info exists cb(handshake)] && \ - $cb(handshake) == "done"} { - return 1 - } - while {1} { - vwait tls::${chan}(handshake) - if {![info exists cb(handshake)]} { - return 0 - } - if {$cb(handshake) == "done"} { - return 1 - } - } -} - -proc tls::password {} { - log 0 "TLS/Password: did you forget to set your passwd!" - # Return the worlds best kept secret password. - return "secret" -} - -proc tls::log {level msg} { - variable debug - variable logcmd - - if {$level > $debug || $logcmd == ""} { - return - } - set cmd $logcmd - lappend cmd $msg - uplevel #0 $cmd -} - diff --git a/tls/tlsBIO.c b/tls/tlsBIO.c deleted file mode 100644 index 07a230c..0000000 --- a/tls/tlsBIO.c +++ /dev/null @@ -1,242 +0,0 @@ -/* - * Copyright (C) 1997-2000 Matt Newman - * - * $Header: /cvsroot/tls/tls/tlsBIO.c,v 1.8 2004/03/24 05:22:53 razzell Exp $ - * - * Provides BIO layer to interface openssl to Tcl. - */ - -#include "tlsInt.h" - -/* - * Forward declarations - */ - -static int BioWrite _ANSI_ARGS_ ((BIO *h, CONST char *buf, int num)); -static int BioRead _ANSI_ARGS_ ((BIO *h, char *buf, int num)); -static int BioPuts _ANSI_ARGS_ ((BIO *h, CONST char *str)); -static long BioCtrl _ANSI_ARGS_ ((BIO *h, int cmd, long arg1, void *ptr)); -static int BioNew _ANSI_ARGS_ ((BIO *h)); -static int BioFree _ANSI_ARGS_ ((BIO *h)); - - -static BIO_METHOD BioMethods = { - BIO_TYPE_TCL, "tcl", - BioWrite, - BioRead, - BioPuts, - NULL, /* BioGets */ - BioCtrl, - BioNew, - BioFree, -}; - -BIO * -BIO_new_tcl(statePtr, flags) - State *statePtr; - int flags; -{ - BIO *bio; - - bio = BIO_new(&BioMethods); - bio->ptr = (char*)statePtr; - bio->init = 1; - bio->shutdown = flags; - - return bio; -} - -BIO_METHOD * -BIO_s_tcl() -{ - return &BioMethods; -} - -static int -BioWrite (bio, buf, bufLen) - BIO *bio; - CONST char *buf; - int bufLen; -{ - Tcl_Channel chan = Tls_GetParent((State*)(bio->ptr)); - int ret; - - dprintf(stderr,"\nBioWrite(0x%x, , %d) [0x%x]", - (unsigned int) bio, bufLen, (unsigned int) chan); - - if (channelTypeVersion == TLS_CHANNEL_VERSION_2) { - ret = Tcl_WriteRaw(chan, buf, bufLen); - } else { - ret = Tcl_Write(chan, buf, bufLen); - } - - dprintf(stderr,"\n[0x%x] BioWrite(%d) -> %d [%d.%d]", - (unsigned int) chan, bufLen, ret, Tcl_Eof(chan), Tcl_GetErrno()); - - BIO_clear_flags(bio, BIO_FLAGS_WRITE|BIO_FLAGS_SHOULD_RETRY); - - if (ret == 0) { - if (!Tcl_Eof(chan)) { - BIO_set_retry_write(bio); - ret = -1; - } - } - if (BIO_should_read(bio)) { - BIO_set_retry_read(bio); - } - return ret; -} - -static int -BioRead (bio, buf, bufLen) - BIO *bio; - char *buf; - int bufLen; -{ - Tcl_Channel chan = Tls_GetParent((State*)bio->ptr); - int ret = 0; - - dprintf(stderr,"\nBioRead(0x%x, , %d) [0x%x]", - (unsigned int) bio, bufLen, (unsigned int) chan); - - if (buf == NULL) return 0; - - if (channelTypeVersion == TLS_CHANNEL_VERSION_2) { - ret = Tcl_ReadRaw(chan, buf, bufLen); - } else { - ret = Tcl_Read(chan, buf, bufLen); - } - - dprintf(stderr,"\n[0x%x] BioRead(%d) -> %d [%d.%d]", - (unsigned int) chan, bufLen, ret, Tcl_Eof(chan), Tcl_GetErrno()); - - BIO_clear_flags(bio, BIO_FLAGS_READ|BIO_FLAGS_SHOULD_RETRY); - - if (ret == 0) { - if (!Tcl_Eof(chan)) { - BIO_set_retry_read(bio); - ret = -1; - } - } - if (BIO_should_write(bio)) { - BIO_set_retry_write(bio); - } - return ret; -} - -static int -BioPuts (bio, str) - BIO *bio; - CONST char *str; -{ - return BioWrite(bio, str, (int) strlen(str)); -} - -static long -BioCtrl (bio, cmd, num, ptr) - BIO *bio; - int cmd; - long num; - void *ptr; -{ - Tcl_Channel chan = Tls_GetParent((State*)bio->ptr); - long ret = 1; - int *ip; - - dprintf(stderr,"\nBioCtrl(0x%x, 0x%x, 0x%x, 0x%x)", - (unsigned int) bio, (unsigned int) cmd, (unsigned int) num, - (unsigned int) ptr); - - switch (cmd) { - case BIO_CTRL_RESET: - num = 0; - case BIO_C_FILE_SEEK: - case BIO_C_FILE_TELL: - ret = 0; - break; - case BIO_CTRL_INFO: - ret = 1; - break; - case BIO_C_SET_FD: - BioFree(bio); - /* Sets State* */ - bio->ptr = *((char **)ptr); - bio->shutdown = (int)num; - bio->init = 1; - break; - case BIO_C_GET_FD: - if (bio->init) { - ip = (int *)ptr; - if (ip != NULL) { - *ip = bio->num; - } - ret = bio->num; - } else { - ret = -1; - } - break; - case BIO_CTRL_GET_CLOSE: - ret = bio->shutdown; - break; - case BIO_CTRL_SET_CLOSE: - bio->shutdown = (int)num; - break; - case BIO_CTRL_EOF: - dprintf(stderr, "BIO_CTRL_EOF\n"); - ret = Tcl_Eof(chan); - break; - case BIO_CTRL_PENDING: - ret = (Tcl_InputBuffered(chan) ? 1 : 0); - dprintf(stderr, "BIO_CTRL_PENDING(%d)\n", (int) ret); - break; - case BIO_CTRL_WPENDING: - ret = 0; - break; - case BIO_CTRL_DUP: - break; - case BIO_CTRL_FLUSH: - dprintf(stderr, "BIO_CTRL_FLUSH\n"); - if (channelTypeVersion == TLS_CHANNEL_VERSION_2) { - ret = ((Tcl_WriteRaw(chan, "", 0) >= 0) ? 1 : -1); - } else { - ret = ((Tcl_Flush(chan) == TCL_OK) ? 1 : -1); - } - break; - default: - ret = 0; - break; - } - return(ret); -} - -static int -BioNew (bio) - BIO *bio; -{ - bio->init = 0; - bio->num = 0; - bio->ptr = NULL; - bio->flags = 0; - - return 1; -} - -static int -BioFree (bio) - BIO *bio; -{ - if (bio == NULL) { - return 0; - } - - if (bio->shutdown) { - if (bio->init) { - /*shutdown(bio->num, 2) */ - /*closesocket(bio->num) */ - } - bio->init = 0; - bio->flags = 0; - bio->num = 0; - } - return 1; -} diff --git a/tls/tlsConfig.sh.in b/tls/tlsConfig.sh.in deleted file mode 100755 index 0d843b7..0000000 --- a/tls/tlsConfig.sh.in +++ /dev/null @@ -1,45 +0,0 @@ -# tlsConfig.sh -- -# -# This shell script (for sh) is generated automatically by tls's -# configure script. It will create shell variables for most of -# the configuration options discovered by the configure script. -# This script is intended to be included by the configure scripts -# for tls extensions so that they don't have to figure this all -# out for themselves. This file does not duplicate information -# already provided by tclConfig.sh, so you may need to use that -# file in addition to this one. -# -# The information in this file is specific to a single platform. - -# tls's version number. -tls_VERSION='@PACKAGE_VERSION@' - -# The name of the tls library (may be either a .a file or a shared library): -tls_LIB_FILE=@PKG_LIB_FILE@ - -# String to pass to linker to pick up the tls library from its -# build directory. -tls_BUILD_LIB_SPEC='@tls_BUILD_LIB_SPEC@' - -# String to pass to linker to pick up the tls library from its -# installed directory. -tls_LIB_SPEC='@tls_LIB_SPEC@' - -# The name of the tls stub library (a .a file): -#tls_STUB_LIB_FILE=@PKG_STUB_LIB_FILE@ - -# String to pass to linker to pick up the tls stub library from its -# build directory. -#tls_BUILD_STUB_LIB_SPEC='@tls_BUILD_STUB_LIB_SPEC@' - -# String to pass to linker to pick up the tls stub library from its -# installed directory. -#tls_STUB_LIB_SPEC='@tls_STUB_LIB_SPEC@' - -# String to pass to linker to pick up the tls stub library from its -# build directory. -#tls_BUILD_STUB_LIB_PATH='@tls_BUILD_STUB_LIB_PATH@' - -# String to pass to linker to pick up the tls stub library from its -# installed directory. -#tls_STUB_LIB_PATH='@tls_STUB_LIB_PATH@' diff --git a/tls/tlsIO.c b/tls/tlsIO.c deleted file mode 100644 index 9b22548..0000000 --- a/tls/tlsIO.c +++ /dev/null @@ -1,1005 +0,0 @@ -/* - * Copyright (C) 1997-2000 Matt Newman - * Copyright (C) 2000 Ajuba Solutions - * - * $Header: /cvsroot/tls/tls/tlsIO.c,v 1.19 2015/06/06 09:07:08 apnadkarni Exp $ - * - * TLS (aka SSL) Channel - can be layered on any bi-directional - * Tcl_Channel (Note: Requires Trf Core Patch) - * - * This was built from scratch based upon observation of OpenSSL 0.9.2B - * - * Addition credit is due for Andreas Kupries (a.kupries@westend.com), for - * providing the Tcl_ReplaceChannel mechanism and working closely with me - * to enhance it to support full fileevent semantics. - * - * Also work done by the follow people provided the impetus to do this "right": - * tclSSL (Colin McCormack, Shared Technology) - * SSLtcl (Peter Antman) - * - */ - -#include "tlsInt.h" - -/* - * Forward declarations - */ - -static int TlsBlockModeProc _ANSI_ARGS_((ClientData instanceData, - int mode)); -static int TlsCloseProc _ANSI_ARGS_ ((ClientData instanceData, - Tcl_Interp *interp)); -static int TlsInputProc _ANSI_ARGS_((ClientData instanceData, - char *buf, int bufSize, int *errorCodePtr)); -static int TlsOutputProc _ANSI_ARGS_((ClientData instanceData, - CONST char *buf, int toWrite, int *errorCodePtr)); -static int TlsGetOptionProc _ANSI_ARGS_ ((ClientData instanceData, - Tcl_Interp *interp, CONST84 char *optionName, - Tcl_DString *dsPtr)); -static void TlsWatchProc _ANSI_ARGS_((ClientData instanceData, int mask)); -static int TlsGetHandleProc _ANSI_ARGS_ ((ClientData instanceData, - int direction, ClientData *handlePtr)); -static int TlsNotifyProc _ANSI_ARGS_ ((ClientData instanceData, - int mask)); -static void TlsChannelHandler _ANSI_ARGS_ ((ClientData clientData, - int mask)); -static void TlsChannelHandlerTimer _ANSI_ARGS_ ((ClientData clientData)); - -/* - * This structure describes the channel type structure for TCP socket - * based IO. These are what the structures should look like, but we - * have to build them up at runtime to be correct depending on whether - * we are loaded into an 8.2.0-8.3.1 or 8.3.2+ Tcl interpreter. - */ -#ifdef TLS_STATIC_STRUCTURES_NOT_USED -static Tcl_ChannelType tlsChannelType2 = { - "tls", /* Type name. */ - TCL_CHANNEL_VERSION_2, /* A v2 channel (8.3.2+) */ - TlsCloseProc, /* Close proc. */ - TlsInputProc, /* Input proc. */ - TlsOutputProc, /* Output proc. */ - NULL, /* Seek proc. */ - NULL, /* Set option proc. */ - TlsGetOptionProc, /* Get option proc. */ - TlsWatchProc, /* Initialize notifier. */ - TlsGetHandleProc, /* Get file handle out of channel. */ - NULL, /* Close2Proc. */ - TlsBlockModeProc, /* Set blocking/nonblocking mode.*/ - NULL, /* FlushProc. */ - TlsNotifyProc, /* handlerProc. */ -}; - -static Tcl_ChannelType tlsChannelType1 = { - "tls", /* Type name. */ - TlsBlockModeProc, /* Set blocking/nonblocking mode.*/ - TlsCloseProc, /* Close proc. */ - TlsInputProc, /* Input proc. */ - TlsOutputProc, /* Output proc. */ - NULL, /* Seek proc. */ - NULL, /* Set option proc. */ - TlsGetOptionProc, /* Get option proc. */ - TlsWatchProc, /* Initialize notifier. */ - TlsGetHandleProc, /* Get file handle out of channel. */ -}; -#else -static Tcl_ChannelType *tlsChannelType = NULL; -#endif - -/* - *------------------------------------------------------------------- - * - * Tls_ChannelType -- - * - * Return the correct TLS channel driver info - * - * Results: - * The correct channel driver for the current version of Tcl. - * - * Side effects: - * None. - * - *------------------------------------------------------------------- - */ -Tcl_ChannelType *Tls_ChannelType() -{ - /* - * Initialize the channel type if necessary - */ - if (tlsChannelType == NULL) { - /* - * Allocation of a new channeltype structure is not easy, because of - * the various verson of the core and subsequent changes to the - * structure. The main challenge is to allocate enough memory for - * odern versions even if this extyension is compiled against one - * of the older variant! - * - * (1) Versions before stubs (8.0.x) are simple, because they are - * supported only if the extension is compiled against exactly - * that version of the core. - * - * (2) With stubs we just determine the difference between the older - * and modern variant and overallocate accordingly if compiled - * against an older variant. - */ - - unsigned int size = sizeof(Tcl_ChannelType); /* Base size */ - - /* - * Size of a procedure pointer. We assume that all procedure - * pointers are of the same size, regardless of exact type - * (arguments and return values). - * - * 8.2. First version containing close2proc. Baseline. - * 8.3.2 Three additional vectors. Moved blockMode, new flush- and - * handlerProc's. - * - * => Compilation against earlier version has to overallocate three - * procedure pointers. - */ - -#ifdef EMULATE_CHANNEL_VERSION_2 - size += 3 * procPtrSize; -#endif - - tlsChannelType = (Tcl_ChannelType *) ckalloc(size); - memset((VOID *) tlsChannelType, 0, size); - - /* - * Common elements of the structure (no changes in location or name) - * close2Proc, seekProc, setOptionProc stay NULL. - */ - - tlsChannelType->typeName = "tls"; - tlsChannelType->closeProc = TlsCloseProc; - tlsChannelType->inputProc = TlsInputProc; - tlsChannelType->outputProc = TlsOutputProc; - tlsChannelType->getOptionProc = TlsGetOptionProc; - tlsChannelType->watchProc = TlsWatchProc; - tlsChannelType->getHandleProc = TlsGetHandleProc; - - /* - * blockModeProc is a twister. We have to make some runtime-choices, - * depending on the version we compiled against. - */ - -#ifdef EMULATE_CHANNEL_VERSION_2 - /* - * We are compiling against an 8.3.1- core. We have to create some - * definitions for the new elements as the compiler does not know them - * by name. - */ - - if (channelTypeVersion == TLS_CHANNEL_VERSION_1) { - /* - * The 'version' element of 8.3.2 is in the the place of the - * blockModeProc. For 8.2.0-8.3.1 we have to set our blockModeProc - * into this place. - */ - tlsChannelType->blockModeProc = TlsBlockModeProc; - } else /* channelTypeVersion == TLS_CHANNEL_VERSION_2 */ { - /* - * For the 8.3.2 core we present ourselves as a version 2 - * driver. This means a special value in version (ex - * blockModeProc), blockModeProc in a different place and of - * course usage of the handlerProc. The last two have to - * referenced with pointer magic because they aren't defined - * otherwise. - */ - - tlsChannelType->blockModeProc = - (Tcl_DriverBlockModeProc*) TLS_CHANNEL_VERSION_2; - (*((Tcl_DriverBlockModeProc**)(&(tlsChannelType->close2Proc)+1))) - = TlsBlockModeProc; - (*((TlsDriverHandlerProc**)(&(tlsChannelType->close2Proc)+3))) - = TlsNotifyProc; - } -#else - /* - * Compiled against 8.3.2+. Direct access to all elements possible. Use - * channelTypeVersion information to select the values to use. - */ - - if (channelTypeVersion == TLS_CHANNEL_VERSION_1) { - /* - * The 'version' element of 8.3.2 is in the the place of the - * blockModeProc. For the original patch in 8.1.x and the firstly - * included (8.2) we have to set our blockModeProc into this - * place. - */ - tlsChannelType->version = (Tcl_ChannelTypeVersion)TlsBlockModeProc; - } else /* channelTypeVersion == TLS_CHANNEL_VERSION_2 */ { - /* - * For the 8.3.2 core we present ourselves as a version 2 - * driver. This means a special value in version (ex - * blockModeProc), blockModeProc in a different place and of - * course usage of the handlerProc. - */ - - tlsChannelType->version = TCL_CHANNEL_VERSION_2; - tlsChannelType->blockModeProc = TlsBlockModeProc; - tlsChannelType->handlerProc = TlsNotifyProc; - } -#endif - } - return tlsChannelType; -} - -/* - *------------------------------------------------------------------- - * - * TlsBlockModeProc -- - * - * This procedure is invoked by the generic IO level - * to set blocking and nonblocking modes - * Results: - * 0 if successful, errno when failed. - * - * Side effects: - * Sets the device into blocking or nonblocking mode. - * - *------------------------------------------------------------------- - */ - -static int -TlsBlockModeProc(ClientData instanceData, /* Socket state. */ - int mode) /* The mode to set. Can be one of - * TCL_MODE_BLOCKING or - * TCL_MODE_NONBLOCKING. */ -{ - State *statePtr = (State *) instanceData; - - if (mode == TCL_MODE_NONBLOCKING) { - statePtr->flags |= TLS_TCL_ASYNC; - } else { - statePtr->flags &= ~(TLS_TCL_ASYNC); - } - if (channelTypeVersion == TLS_CHANNEL_VERSION_2) { - return 0; - } else { - return Tcl_SetChannelOption(statePtr->interp, Tls_GetParent(statePtr), - "-blocking", (mode == TCL_MODE_NONBLOCKING) ? "0" : "1"); - } -} - -/* - *------------------------------------------------------------------- - * - * TlsCloseProc -- - * - * This procedure is invoked by the generic IO level to perform - * channel-type-specific cleanup when a SSL socket based channel - * is closed. - * - * Note: we leave the underlying socket alone, is this right? - * - * Results: - * 0 if successful, the value of Tcl_GetErrno() if failed. - * - * Side effects: - * Closes the socket of the channel. - * - *------------------------------------------------------------------- - */ -static int -TlsCloseProc(ClientData instanceData, /* The socket to close. */ - Tcl_Interp *interp) /* For error reporting - unused. */ -{ - State *statePtr = (State *) instanceData; - - dprintf(stderr,"\nTlsCloseProc(0x%x)", (unsigned int) statePtr); - - if (channelTypeVersion == TLS_CHANNEL_VERSION_1) { - /* - * Remove event handler to underlying channel, this could - * be because we are closing for real, or being "unstacked". - */ - - Tcl_DeleteChannelHandler(Tls_GetParent(statePtr), - TlsChannelHandler, (ClientData) statePtr); - } - - Tls_Clean(statePtr); - Tcl_EventuallyFree((ClientData)statePtr, Tls_Free); - return TCL_OK; -} - -/* - *------------------------------------------------------------------- - * - * TlsInputProc -- - * - * This procedure is invoked by the generic IO level - * to read input from a SSL socket based channel. - * - * Results: - * The number of bytes read is returned or -1 on error. An output - * argument contains the POSIX error code on error, or zero if no - * error occurred. - * - * Side effects: - * Reads input from the input device of the channel. - * - *------------------------------------------------------------------- - */ - -static int -TlsInputProc(ClientData instanceData, /* Socket state. */ - char *buf, /* Where to store data read. */ - int bufSize, /* How much space is available - * in the buffer? */ - int *errorCodePtr) /* Where to store error code. */ -{ - State *statePtr = (State *) instanceData; - int bytesRead; /* How many bytes were read? */ - - *errorCodePtr = 0; - - dprintf(stderr,"\nBIO_read(%d)", bufSize); - - if (statePtr->flags & TLS_TCL_CALLBACK) { - /* don't process any bytes while verify callback is running */ - bytesRead = 0; - goto input; - } - - if (!SSL_is_init_finished(statePtr->ssl)) { - bytesRead = Tls_WaitForConnect(statePtr, errorCodePtr); - if (bytesRead <= 0) { - if (*errorCodePtr == ECONNRESET) { - /* Soft EOF */ - *errorCodePtr = 0; - bytesRead = 0; - } - goto input; - } - } - if (statePtr->flags & TLS_TCL_INIT) { - statePtr->flags &= ~(TLS_TCL_INIT); - } - /* - * We need to clear the SSL error stack now because we sometimes reach - * this function with leftover errors in the stack. If BIO_read - * returns -1 and intends EAGAIN, there is a leftover error, it will be - * misconstrued as an error, not EAGAIN. - * - * Alternatively, we may want to handle the <0 return codes from - * BIO_read specially (as advised in the RSA docs). TLS's lower level BIO - * functions play with the retry flags though, and this seems to work - * correctly. Similar fix in TlsOutputProc. - hobbs - */ - ERR_clear_error(); - bytesRead = BIO_read(statePtr->bio, buf, bufSize); - dprintf(stderr,"\nBIO_read -> %d", bytesRead); - - if (bytesRead < 0) { - int err = SSL_get_error(statePtr->ssl, bytesRead); - - if (err == SSL_ERROR_SSL) { - Tls_Error(statePtr, SSL_ERROR(statePtr->ssl, bytesRead)); - *errorCodePtr = ECONNABORTED; - } else if (BIO_should_retry(statePtr->bio)) { - dprintf(stderr,"RE! "); - *errorCodePtr = EAGAIN; - } else { - *errorCodePtr = Tcl_GetErrno(); - if (*errorCodePtr == ECONNRESET) { - /* Soft EOF */ - *errorCodePtr = 0; - bytesRead = 0; - } - } - } - input: - dprintf(stderr, "\nInput(%d) -> %d [%d]", bufSize, bytesRead, *errorCodePtr); - return bytesRead; -} - -/* - *------------------------------------------------------------------- - * - * TlsOutputProc -- - * - * This procedure is invoked by the generic IO level - * to write output to a SSL socket based channel. - * - * Results: - * The number of bytes written is returned. An output argument is - * set to a POSIX error code if an error occurred, or zero. - * - * Side effects: - * Writes output on the output device of the channel. - * - *------------------------------------------------------------------- - */ - -static int -TlsOutputProc(ClientData instanceData, /* Socket state. */ - CONST char *buf, /* The data buffer. */ - int toWrite, /* How many bytes to write? */ - int *errorCodePtr) /* Where to store error code. */ -{ - State *statePtr = (State *) instanceData; - int written, err; - - *errorCodePtr = 0; - - dprintf(stderr,"\nBIO_write(0x%x, %d)", (unsigned int) statePtr, toWrite); - - if (statePtr->flags & TLS_TCL_CALLBACK) { - /* don't process any bytes while verify callback is running */ - written = -1; - *errorCodePtr = EAGAIN; - goto output; - } - - if (!SSL_is_init_finished(statePtr->ssl)) { - written = Tls_WaitForConnect(statePtr, errorCodePtr); - if (written <= 0) { - goto output; - } - } - if (statePtr->flags & TLS_TCL_INIT) { - statePtr->flags &= ~(TLS_TCL_INIT); - } - if (toWrite == 0) { - dprintf(stderr, "zero-write\n"); - BIO_flush(statePtr->bio); - written = 0; - goto output; - } else { - /* - * We need to clear the SSL error stack now because we sometimes reach - * this function with leftover errors in the stack. If BIO_write - * returns -1 and intends EAGAIN, there is a leftover error, it will be - * misconstrued as an error, not EAGAIN. - * - * Alternatively, we may want to handle the <0 return codes from - * BIO_write specially (as advised in the RSA docs). TLS's lower level - * BIO functions play with the retry flags though, and this seems to - * work correctly. Similar fix in TlsInputProc. - hobbs - */ - ERR_clear_error(); - written = BIO_write(statePtr->bio, buf, toWrite); - dprintf(stderr,"\nBIO_write(0x%x, %d) -> [%d]", - (unsigned int) statePtr, toWrite, written); - } - if (written <= 0) { - switch ((err = SSL_get_error(statePtr->ssl, written))) { - case SSL_ERROR_NONE: - if (written < 0) { - written = 0; - } - break; - case SSL_ERROR_WANT_WRITE: - dprintf(stderr," write W BLOCK"); - break; - case SSL_ERROR_WANT_READ: - dprintf(stderr," write R BLOCK"); - break; - case SSL_ERROR_WANT_X509_LOOKUP: - dprintf(stderr," write X BLOCK"); - break; - case SSL_ERROR_ZERO_RETURN: - dprintf(stderr," closed\n"); - written = 0; - break; - case SSL_ERROR_SYSCALL: - *errorCodePtr = Tcl_GetErrno(); - dprintf(stderr," [%d] syscall errr: %d", - written, *errorCodePtr); - written = -1; - break; - case SSL_ERROR_SSL: - Tls_Error(statePtr, SSL_ERROR(statePtr->ssl, written)); - *errorCodePtr = ECONNABORTED; - written = -1; - break; - default: - dprintf(stderr," unknown err: %d\n", err); - break; - } - } - output: - dprintf(stderr, "\nOutput(%d) -> %d", toWrite, written); - return written; -} - -/* - *------------------------------------------------------------------- - * - * TlsGetOptionProc -- - * - * Computes an option value for a SSL socket based channel, or a - * list of all options and their values. - * - * Results: - * A standard Tcl result. The value of the specified option or a - * list of all options and their values is returned in the - * supplied DString. - * - * Side effects: - * None. - * - *------------------------------------------------------------------- - */ -static int -TlsGetOptionProc(ClientData instanceData, /* Socket state. */ - Tcl_Interp *interp, /* For errors - can be NULL. */ - CONST84 char *optionName, /* Name of the option to - * retrieve the value for, or - * NULL to get all options and - * their values. */ - Tcl_DString *dsPtr) /* Where to store the computed value - * initialized by caller. */ -{ - State *statePtr = (State *) instanceData; - - if (channelTypeVersion == TLS_CHANNEL_VERSION_2) { - Tcl_Channel downChan = Tls_GetParent(statePtr); - Tcl_DriverGetOptionProc *getOptionProc; - - getOptionProc = Tcl_ChannelGetOptionProc(Tcl_GetChannelType(downChan)); - if (getOptionProc != NULL) { - return (*getOptionProc)(Tcl_GetChannelInstanceData(downChan), - interp, optionName, dsPtr); - } else if (optionName == (char*) NULL) { - /* - * Request is query for all options, this is ok. - */ - return TCL_OK; - } - /* - * Request for a specific option has to fail, we don't have any. - */ - return TCL_ERROR; - } else { - size_t len = 0; - - if (optionName != (char *) NULL) { - len = strlen(optionName); - } -#if 0 - if ((len == 0) || ((len > 1) && (optionName[1] == 'c') && - (strncmp(optionName, "-cipher", len) == 0))) { - if (len == 0) { - Tcl_DStringAppendElement(dsPtr, "-cipher"); - } - Tcl_DStringAppendElement(dsPtr, SSL_get_cipher(statePtr->ssl)); - if (len) { - return TCL_OK; - } - } -#endif - return TCL_OK; - } -} - -/* - *------------------------------------------------------------------- - * - * TlsWatchProc -- - * - * Initialize the notifier to watch Tcl_Files from this channel. - * - * Results: - * None. - * - * Side effects: - * Sets up the notifier so that a future event on the channel - * will be seen by Tcl. - * - *------------------------------------------------------------------- - */ - -static void -TlsWatchProc(ClientData instanceData, /* The socket state. */ - int mask) /* Events of interest; an OR-ed - * combination of TCL_READABLE, - * TCL_WRITABLE and TCL_EXCEPTION. */ -{ - State *statePtr = (State *) instanceData; - - dprintf(stderr, "TlsWatchProc(0x%x)\n", mask); - - /* Pretend to be dead as long as the verify callback is running. - * Otherwise that callback could be invoked recursively. */ - if (statePtr->flags & TLS_TCL_CALLBACK) { return; } - - if (channelTypeVersion == TLS_CHANNEL_VERSION_2) { - Tcl_Channel downChan; - - statePtr->watchMask = mask; - - /* No channel handlers any more. We will be notified automatically - * about events on the channel below via a call to our - * 'TransformNotifyProc'. But we have to pass the interest down now. - * We are allowed to add additional 'interest' to the mask if we want - * to. But this transformation has no such interest. It just passes - * the request down, unchanged. - */ - - downChan = Tls_GetParent(statePtr); - - (Tcl_GetChannelType(downChan)) - ->watchProc(Tcl_GetChannelInstanceData(downChan), mask); - - /* - * Management of the internal timer. - */ - - if (statePtr->timer != (Tcl_TimerToken) NULL) { - Tcl_DeleteTimerHandler(statePtr->timer); - statePtr->timer = (Tcl_TimerToken) NULL; - } - if ((mask & TCL_READABLE) && Tcl_InputBuffered(statePtr->self) > 0) { - /* - * There is interest in readable events and we actually have - * data waiting, so generate a timer to flush that. - */ - statePtr->timer = Tcl_CreateTimerHandler(TLS_TCL_DELAY, - TlsChannelHandlerTimer, (ClientData) statePtr); - } - } else { - if (mask == statePtr->watchMask) - return; - - if (statePtr->watchMask) { - /* - * Remove event handler to underlying channel, this could - * be because we are closing for real, or being "unstacked". - */ - - Tcl_DeleteChannelHandler(Tls_GetParent(statePtr), - TlsChannelHandler, (ClientData) statePtr); - } - statePtr->watchMask = mask; - if (statePtr->watchMask) { - /* - * Setup active monitor for events on underlying Channel. - */ - - Tcl_CreateChannelHandler(Tls_GetParent(statePtr), - statePtr->watchMask, TlsChannelHandler, - (ClientData) statePtr); - } - } -} - -/* - *------------------------------------------------------------------- - * - * TlsGetHandleProc -- - * - * Called from Tcl_GetChannelFile to retrieve o/s file handler - * from the SSL socket based channel. - * - * Results: - * The appropriate Tcl_File or NULL if not present. - * - * Side effects: - * None. - * - *------------------------------------------------------------------- - */ -static int -TlsGetHandleProc(ClientData instanceData, /* The socket state. */ - int direction, /* Which Tcl_File to retrieve? */ - ClientData *handlePtr) /* Where to store the handle. */ -{ - State *statePtr = (State *) instanceData; - - return Tcl_GetChannelHandle(Tls_GetParent(statePtr), direction, handlePtr); -} - -/* - *------------------------------------------------------------------- - * - * TlsNotifyProc -- - * - * Handler called by Tcl to inform us of activity - * on the underlying channel. - * - * Results: - * None. - * - * Side effects: - * May process the incoming event by itself. - * - *------------------------------------------------------------------- - */ - -static int -TlsNotifyProc(instanceData, mask) - ClientData instanceData; /* The state of the notified transformation */ - int mask; /* The mask of occuring events */ -{ - State *statePtr = (State *) instanceData; - - /* - * An event occured in the underlying channel. This - * transformation doesn't process such events thus returns the - * incoming mask unchanged. - */ - - if (statePtr->timer != (Tcl_TimerToken) NULL) { - /* - * Delete an existing timer. It was not fired, yet we are - * here, so the channel below generated such an event and we - * don't have to. The renewal of the interest after the - * execution of channel handlers will eventually cause us to - * recreate the timer (in WatchProc). - */ - - Tcl_DeleteTimerHandler(statePtr->timer); - statePtr->timer = (Tcl_TimerToken) NULL; - } - - if (statePtr->flags & TLS_TCL_CALLBACK) { - return 0; - } - - if (statePtr->flags & TLS_TCL_INIT - && !SSL_is_init_finished(statePtr->ssl)) { - int errorCode; - if (Tls_WaitForConnect(statePtr, &errorCode) <= 0 - && errorCode == EAGAIN) { - return 0; - } - } - - return mask; -} - -/* - *------------------------------------------------------* - * - * TlsChannelHandler -- - * - * ------------------------------------------------* - * Handler called by Tcl as a result of - * Tcl_CreateChannelHandler - to inform us of activity - * on the underlying channel. - * ------------------------------------------------* - * - * Sideeffects: - * May generate subsequent calls to - * Tcl_NotifyChannel. - * - * Result: - * None. - * - *------------------------------------------------------* - */ - -static void -TlsChannelHandler (clientData, mask) - ClientData clientData; - int mask; -{ - State *statePtr = (State *) clientData; - -dprintf(stderr, "HANDLER(0x%x)\n", mask); - Tcl_Preserve( (ClientData)statePtr); - - if (mask & TCL_READABLE) { - BIO_set_flags(statePtr->p_bio, BIO_FLAGS_READ); - } else { - BIO_clear_flags(statePtr->p_bio, BIO_FLAGS_READ); - } - - if (mask & TCL_WRITABLE) { - BIO_set_flags(statePtr->p_bio, BIO_FLAGS_WRITE); - } else { - BIO_clear_flags(statePtr->p_bio, BIO_FLAGS_WRITE); - } - - mask = 0; - if (BIO_wpending(statePtr->bio)) { - mask |= TCL_WRITABLE; - } - if (BIO_pending(statePtr->bio)) { - mask |= TCL_READABLE; - } - - /* - * The following NotifyChannel calls seems to be important, but - * we don't know why. It looks like if the mask is ever non-zero - * that it will enter an infinite loop. - * - * Notify the upper channel of the current BIO state so the event - * continues to propagate up the chain. - * - * stanton: It looks like this could result in an infinite loop if - * the upper channel doesn't cause ChannelHandler to be removed - * before Tcl_NotifyChannel calls channel handlers on the lower channel. - */ - - Tcl_NotifyChannel(statePtr->self, mask); - - if (statePtr->timer != (Tcl_TimerToken)NULL) { - Tcl_DeleteTimerHandler(statePtr->timer); - statePtr->timer = (Tcl_TimerToken)NULL; - } - if ((mask & TCL_READABLE) && Tcl_InputBuffered(statePtr->self) > 0) { - /* - * Data is waiting, flush it out in short time - */ - statePtr->timer = Tcl_CreateTimerHandler(TLS_TCL_DELAY, - TlsChannelHandlerTimer, (ClientData) statePtr); - } - Tcl_Release( (ClientData)statePtr); -} - -/* - *------------------------------------------------------* - * - * TlsChannelHandlerTimer -- - * - * ------------------------------------------------* - * Called by the notifier (-> timer) to flush out - * information waiting in channel buffers. - * ------------------------------------------------* - * - * Sideeffects: - * As of 'TlsChannelHandler'. - * - * Result: - * None. - * - *------------------------------------------------------* - */ - -static void -TlsChannelHandlerTimer (clientData) -ClientData clientData; /* Transformation to query */ -{ - State *statePtr = (State *) clientData; - int mask = 0; - - statePtr->timer = (Tcl_TimerToken) NULL; - - if (BIO_wpending(statePtr->bio)) { - mask |= TCL_WRITABLE; - } - if (BIO_pending(statePtr->bio)) { - mask |= TCL_READABLE; - } - Tcl_NotifyChannel(statePtr->self, mask); -} - -/* - *------------------------------------------------------* - * - * Tls_WaitForConnect -- - * - * Sideeffects: - * Issues SSL_accept or SSL_connect - * - * Result: - * None. - * - *------------------------------------------------------* - */ -int -Tls_WaitForConnect( statePtr, errorCodePtr) - State *statePtr; - int *errorCodePtr; /* Where to store error code. */ -{ - int err; - - dprintf(stderr,"\nWaitForConnect(0x%x)", (unsigned int) statePtr); - - if (statePtr->flags & TLS_TCL_HANDSHAKE_FAILED) { - /* - * We choose ECONNRESET over ECONNABORTED here because some server - * side code, on the wiki for example, sets up a read handler that - * does a read and if eof closes the channel. There is no catch/try - * around the reads so exceptions will result in potentially many - * dangling channels hanging around that should have been closed. - * (Backgroun: ECONNABORTED maps to a Tcl exception and - * ECONNRESET maps to graceful EOF). - */ - *errorCodePtr = ECONNRESET; - return -1; - } - - for (;;) { - /* Not initialized yet! */ - if (statePtr->flags & TLS_TCL_SERVER) { - err = SSL_accept(statePtr->ssl); - } else { - err = SSL_connect(statePtr->ssl); - } - /*SSL_write(statePtr->ssl, (char*)&err, 0); HACK!!! */ - if (err > 0) { - BIO_flush(statePtr->bio); - } - - if (err <= 0) { - int rc = SSL_get_error(statePtr->ssl, err); - - if (rc == SSL_ERROR_SSL) { - Tls_Error(statePtr, - (char *)ERR_reason_error_string(ERR_get_error())); - statePtr->flags |= TLS_TCL_HANDSHAKE_FAILED; - *errorCodePtr = ECONNABORTED; - return -1; - } else if (BIO_should_retry(statePtr->bio)) { - if (statePtr->flags & TLS_TCL_ASYNC) { - dprintf(stderr,"E! "); - *errorCodePtr = EAGAIN; - return -1; - } else { - continue; - } - } else if (err == 0) { - dprintf(stderr,"CR! "); - *errorCodePtr = ECONNRESET; - return -1; - } - if (statePtr->flags & TLS_TCL_SERVER) { - err = SSL_get_verify_result(statePtr->ssl); - if (err != X509_V_OK) { - Tls_Error(statePtr, - (char *)X509_verify_cert_error_string(err)); - statePtr->flags |= TLS_TCL_HANDSHAKE_FAILED; - *errorCodePtr = ECONNABORTED; - return -1; - } - } - *errorCodePtr = Tcl_GetErrno(); - dprintf(stderr,"ERR(%d, %d) ", rc, *errorCodePtr); - return -1; - } - dprintf(stderr,"R0! "); - return 1; - } -} - -Tcl_Channel -Tls_GetParent( statePtr ) - State *statePtr; -{ - if (channelTypeVersion == TLS_CHANNEL_VERSION_2) { - return Tcl_GetStackedChannel(statePtr->self); - } else { - /* The reason for the existence of this procedure is - * the fact that stacking a transform over another - * transform will leave our internal pointer unchanged, - * and thus pointing to the new transform, and not the - * Channel structure containing the saved state of this - * transform. This is the price to pay for leaving - * Tcl_Channel references intact. The only other solution - * is an extension of Tcl_ChannelType with another driver - * procedure to notify a Channel about the (un)stacking. - * - * It walks the chain of Channel structures until it - * finds the one pointing having 'ctrl' as instanceData - * and then returns the superceding channel to that. (AK) - */ - - Tcl_Channel self = statePtr->self; - Tcl_Channel next; - - while ((ClientData) statePtr != Tcl_GetChannelInstanceData (self)) { - next = Tcl_GetStackedChannel (self); - if (next == (Tcl_Channel) NULL) { - /* 09/24/1999 Unstacking bug, - * found by Matt Newman . - * - * We were unable to find the channel structure for this - * transformation in the chain of stacked channel. This - * means that we are currently in the process of unstacking - * it *and* there were some bytes waiting which are now - * flushed. In this situation the pointer to the channel - * itself already refers to the parent channel we have to - * write the bytes into, so we return that. - */ - return statePtr->self; - } - self = next; - } - - return Tcl_GetStackedChannel (self); - } -} diff --git a/tls/tlsInt.h b/tls/tlsInt.h deleted file mode 100644 index 3469d00..0000000 --- a/tls/tlsInt.h +++ /dev/null @@ -1,262 +0,0 @@ -/* - * Copyright (C) 1997-2000 Matt Newman - * - * $Header: /cvsroot/tls/tls/tlsInt.h,v 1.17 2015/06/06 09:07:08 apnadkarni Exp $ - * - * TLS (aka SSL) Channel - can be layered on any bi-directional - * Tcl_Channel (Note: Requires Trf Core Patch) - * - * This was built from scratch based upon observation of OpenSSL 0.9.2B - * - * Addition credit is due for Andreas Kupries (a.kupries@westend.com), for - * providing the Tcl_ReplaceChannel mechanism and working closely with me - * to enhance it to support full fileevent semantics. - * - * Also work done by the follow people provided the impetus to do this "right":- - * tclSSL (Colin McCormack, Shared Technology) - * SSLtcl (Peter Antman) - * - */ -#ifndef _TSLINT_H -#define _TLSINT_H - -#include "tls.h" -#include -#include - -#ifdef __WIN32__ -#define WIN32_LEAN_AND_MEAN -#include -#include /* OpenSSL needs this on Windows */ -#endif - -/* Handle tcl8.3->tcl8.4 CONST changes */ -#ifndef CONST84 -#define CONST84 -#endif - -#ifdef NO_PATENTS -#define NO_IDEA -#define NO_RC2 -#define NO_RC4 -#define NO_RC5 -#define NO_RSA -#define NO_SSL2 -#endif - -#ifdef BSAFE -#include -#include -#include -#else -#include -#include -#include -#endif - -#ifndef SSL_OP_NO_TLSv1_1 -#define NO_TLS1_1 -#endif - -#ifndef SSL_OP_NO_TLSv1_2 -#define NO_TLS1_2 -#endif - -#ifdef TCL_STORAGE_CLASS -# undef TCL_STORAGE_CLASS -#endif -#ifdef BUILD_tls -# define TCL_STORAGE_CLASS DLLEXPORT -#else -# define TCL_STORAGE_CLASS DLLIMPORT -#endif - -#ifndef ECONNABORTED -#define ECONNABORTED 130 /* Software caused connection abort */ -#endif -#ifndef ECONNRESET -#define ECONNRESET 131 /* Connection reset by peer */ -#endif - -#ifdef DEBUG -#define dprintf fprintf -#else -#define dprintf if (0) fprintf -#endif - -#define SSL_ERROR(ssl,err) \ - ((char*)ERR_reason_error_string((unsigned long)SSL_get_error((ssl),(err)))) -/* - * OpenSSL BIO Routines - */ -#define BIO_TYPE_TCL (19|0x0400) - -/* - * Defines for State.flags - */ -#define TLS_TCL_ASYNC (1<<0) /* non-blocking mode */ -#define TLS_TCL_SERVER (1<<1) /* Server-Side */ -#define TLS_TCL_INIT (1<<2) /* Initializing connection */ -#define TLS_TCL_DEBUG (1<<3) /* Show debug tracing */ -#define TLS_TCL_CALLBACK (1<<4) /* In a callback, prevent update - * looping problem. [Bug 1652380] */ -#define TLS_TCL_HANDSHAKE_FAILED (1<<5) /* Set on handshake failures and once - * set, all further I/O will result - * in ECONNABORTED errors. */ - -#define TLS_TCL_DELAY (5) - -/* - * This structure describes the per-instance state - * of an ssl channel. - * - * The SSL processing context is maintained here, in the ClientData - */ -typedef struct State { - Tcl_Channel self; /* this socket channel */ - Tcl_TimerToken timer; - - int flags; /* see State.flags above */ - int watchMask; /* current WatchProc mask */ - int mode; /* current mode of parent channel */ - - Tcl_Interp *interp; /* interpreter in which this resides */ - Tcl_Obj *callback; /* script called for tracing, verifying and errors */ - Tcl_Obj *password; /* script called for certificate password */ - - int vflags; /* verify flags */ - SSL *ssl; /* Struct for SSL processing */ - SSL_CTX *ctx; /* SSL Context */ - BIO *bio; /* Struct for SSL processing */ - BIO *p_bio; /* Parent BIO (that is layered on Tcl_Channel) */ - - char *err; -} State; - -/* - * The following definitions have to be usable for 8.2.0-8.3.1 and 8.3.2+. - * The differences between these versions: - * - * 8.0-8.1: There is no support for these in TLS 1.4 (get 1.3). This - * was the version with the original patch. - * - * 8.2.0- Changed semantics for Tcl_StackChannel (Tcl_ReplaceChannel). - * 8.3.1: Check at runtime to switch the behaviour. The patch is part - * of the core from now on. - * - * 8.3.2+: Stacked channels rewritten for better behaviour in some - * situations (closing). Some new API's, semantic changes. - * - * The following magic was adapted from Trf 2.1 (Kupries). - */ - -#define TLS_CHANNEL_VERSION_1 0x1 -#define TLS_CHANNEL_VERSION_2 0x2 -extern int channelTypeVersion; - -#ifdef USE_TCL_STUBS -#ifndef Tcl_StackChannel -/* - * The core we are compiling against is not patched, so supply the - * necesssary definitions here by ourselves. The form chosen for - * the procedure macros (reservedXXX) will notify us if the core - * does not have these reserved locations anymore. - * - * !! Synchronize the procedure indices in their definitions with - * the patch to tcl.decls, as they have to be the same. - */ - -/* 281 */ -typedef Tcl_Channel (tls_StackChannel) _ANSI_ARGS_((Tcl_Interp* interp, - Tcl_ChannelType* typePtr, - ClientData instanceData, - int mask, - Tcl_Channel prevChan)); -/* 282 */ -typedef void (tls_UnstackChannel) _ANSI_ARGS_((Tcl_Interp* interp, - Tcl_Channel chan)); - -#define Tcl_StackChannel ((tls_StackChannel*) tclStubsPtr->reserved281) -#define Tcl_UnstackChannel ((tls_UnstackChannel*) tclStubsPtr->reserved282) - -#endif /* Tcl_StackChannel */ - -#ifndef Tcl_GetStackedChannel -/* - * Separate definition, available in 8.2, but not 8.1 and before ! - */ - -/* 283 */ -typedef Tcl_Channel (tls_GetStackedChannel) _ANSI_ARGS_((Tcl_Channel chan)); - -#define Tcl_GetStackedChannel ((tls_GetStackedChannel*) tclStubsPtr->reserved283) - -#endif /* Tcl_GetStackedChannel */ - - -#ifndef TCL_CHANNEL_VERSION_2 -/* - * Core is older than 8.3.2. Supply the missing definitions for - * the new API's in 8.3.2. - */ -#define EMULATE_CHANNEL_VERSION_2 - -typedef struct TlsChannelTypeVersion_* TlsChannelTypeVersion; -#define TCL_CHANNEL_VERSION_2 ((TlsChannelTypeVersion) 0x2) - -typedef int (TlsDriverHandlerProc) _ANSI_ARGS_((ClientData instanceData, - int interestMask)); -/* 394 */ -typedef int (tls_ReadRaw) _ANSI_ARGS_((Tcl_Channel chan, char *dst, - int bytesToRead)); -/* 395 */ -typedef int (tls_WriteRaw) _ANSI_ARGS_((Tcl_Channel chan, char *src, - int srcLen)); -/* 397 */ -typedef int (tls_GetTopChannel) _ANSI_ARGS_((Tcl_Channel chan)); - -/* - * Generating code for accessing these parts of the stub table when - * compiling against a core older than 8.3.2 is a hassle because even - * the 'reservedXXX' fields of the structure are not defined yet. So - * we have to write up some macros hiding some very hackish pointer - * arithmetics to get at these fields. We assume that pointer to - * functions are always of the same size. - */ - -#define STUB_BASE ((char*)(&(tclStubsPtr->tcl_UtfNcasecmp))) /* field 370 */ -#define procPtrSize (sizeof (Tcl_DriverBlockModeProc *)) -#define IDX(n) (((n)-370) * procPtrSize) -#define SLOT(n) (STUB_BASE + IDX(n)) - -#define Tcl_ReadRaw (*((tls_ReadRaw**) (SLOT(394)))) -#define Tcl_WriteRaw (*((tls_WriteRaw**) (SLOT(395)))) -#define Tcl_GetTopChannel (*((tls_GetTopChannel**)(SLOT(396)))) - -/* - * Required, easy emulation. - */ -#define Tcl_ChannelGetOptionProc(chanDriver) ((chanDriver)->getOptionProc) - -#endif /* TCL_CHANNEL_VERSION_2 */ - -#endif /* USE_TCL_STUBS */ - -/* - * Forward declarations - */ - -EXTERN Tcl_ChannelType *Tls_ChannelType _ANSI_ARGS_((void)); -EXTERN Tcl_Channel Tls_GetParent _ANSI_ARGS_((State *statePtr)); - -EXTERN Tcl_Obj* Tls_NewX509Obj _ANSI_ARGS_ (( Tcl_Interp *interp, X509 *cert)); -EXTERN void Tls_Error _ANSI_ARGS_ ((State *statePtr, char *msg)); -EXTERN void Tls_Free _ANSI_ARGS_ ((char *blockPtr)); -EXTERN void Tls_Clean _ANSI_ARGS_ ((State *statePtr)); -EXTERN int Tls_WaitForConnect _ANSI_ARGS_(( State *statePtr, - int *errorCodePtr)); - -EXTERN BIO_METHOD * BIO_s_tcl _ANSI_ARGS_((void)); -EXTERN BIO * BIO_new_tcl _ANSI_ARGS_((State* statePtr, int flags)); - -#endif /* _TLSINT_H */ diff --git a/tls/tlsX509.c b/tls/tlsX509.c deleted file mode 100644 index 2a529b1..0000000 --- a/tls/tlsX509.c +++ /dev/null @@ -1,179 +0,0 @@ -/* - * Copyright (C) 1997-2000 Sensus Consulting Ltd. - * Matt Newman - * - * $Header: /cvsroot/tls/tls/tlsX509.c,v 1.5 2004/06/29 10:58:08 patthoyts Exp $ - */ -#include "tlsInt.h" - -/* - * Ensure these are not macros - known to be defined on Win32 - */ -#ifdef min -#undef min -#endif - -#ifdef max -#undef max -#endif - -static int min(int a, int b) -{ - return (a < b) ? a : b; -} - -static int max(int a, int b) -{ - return (a > b) ? a : b; -} - -/* - * ASN1_UTCTIME_tostr -- - */ -static char * -ASN1_UTCTIME_tostr(ASN1_UTCTIME *tm) -{ - static char bp[128]; - char *v; - int gmt=0; - static char *mon[12]={ - "Jan","Feb","Mar","Apr","May","Jun", - "Jul","Aug","Sep","Oct","Nov","Dec"}; - int i; - int y=0,M=0,d=0,h=0,m=0,s=0; - - i=tm->length; - v=(char *)tm->data; - - if (i < 10) goto err; - if (v[i-1] == 'Z') gmt=1; - for (i=0; i<10; i++) - if ((v[i] > '9') || (v[i] < '0')) goto err; - y= (v[0]-'0')*10+(v[1]-'0'); - if (y < 70) y+=100; - M= (v[2]-'0')*10+(v[3]-'0'); - if ((M > 12) || (M < 1)) goto err; - d= (v[4]-'0')*10+(v[5]-'0'); - h= (v[6]-'0')*10+(v[7]-'0'); - m= (v[8]-'0')*10+(v[9]-'0'); - if ( (v[10] >= '0') && (v[10] <= '9') && - (v[11] >= '0') && (v[11] <= '9')) - s= (v[10]-'0')*10+(v[11]-'0'); - - sprintf(bp,"%s %2d %02d:%02d:%02d %d%s", - mon[M-1],d,h,m,s,y+1900,(gmt)?" GMT":""); - return bp; - err: - return "Bad time value"; -} - -/* - *------------------------------------------------------* - * - * Tls_NewX509Obj -- - * - * ------------------------------------------------* - * Converts a X509 certificate into a Tcl_Obj - * ------------------------------------------------* - * - * Sideeffects: - * None - * - * Result: - * A Tcl List Object representing the provided - * X509 certificate. - * - *------------------------------------------------------* - */ - -Tcl_Obj* -Tls_NewX509Obj( interp, cert) - Tcl_Interp *interp; - X509 *cert; -{ - Tcl_Obj *certPtr = Tcl_NewListObj( 0, NULL); - BIO *bio; - int n; - unsigned long flags; - char subject[BUFSIZ]; - char issuer[BUFSIZ]; - char serial[BUFSIZ]; - char notBefore[BUFSIZ]; - char notAfter[BUFSIZ]; -#ifndef NO_SSL_SHA - int shai; - char sha_hash[SHA_DIGEST_LENGTH*2]; - const char *shachars="0123456789ABCDEF"; -#endif - - if ((bio = BIO_new(BIO_s_mem())) == NULL) { - subject[0] = 0; - issuer[0] = 0; - serial[0] = 0; - } else { - flags = XN_FLAG_RFC2253 | ASN1_STRFLGS_UTF8_CONVERT; - flags &= ~ASN1_STRFLGS_ESC_MSB; - - X509_NAME_print_ex(bio, X509_get_subject_name(cert), 0, flags); - n = BIO_read(bio, subject, min(BIO_pending(bio), BUFSIZ - 1)); - n = max(n, 0); - subject[n] = 0; - BIO_flush(bio); - - X509_NAME_print_ex(bio, X509_get_issuer_name(cert), 0, flags); - n = BIO_read(bio, issuer, min(BIO_pending(bio), BUFSIZ - 1)); - n = max(n, 0); - issuer[n] = 0; - BIO_flush(bio); - - i2a_ASN1_INTEGER(bio, X509_get_serialNumber(cert)); - n = BIO_read(bio, serial, min(BIO_pending(bio), BUFSIZ - 1)); - n = max(n, 0); - serial[n] = 0; - BIO_flush(bio); - - BIO_free(bio); - } - - strcpy( notBefore, ASN1_UTCTIME_tostr( X509_get_notBefore(cert) )); - strcpy( notAfter, ASN1_UTCTIME_tostr( X509_get_notAfter(cert) )); - -#ifndef NO_SSL_SHA - for (shai=0;shaisha1_hash[shai] & 0xF0) >> 4]; - sha_hash[shai * 2 + 1]=shachars[(cert->sha1_hash[shai] & 0x0F)]; - } - Tcl_ListObjAppendElement( interp, certPtr, - Tcl_NewStringObj( "sha1_hash", -1) ); - Tcl_ListObjAppendElement( interp, certPtr, - Tcl_NewStringObj( sha_hash, SHA_DIGEST_LENGTH*2) ); - -#endif - Tcl_ListObjAppendElement( interp, certPtr, - Tcl_NewStringObj( "subject", -1) ); - Tcl_ListObjAppendElement( interp, certPtr, - Tcl_NewStringObj( subject, -1) ); - - Tcl_ListObjAppendElement( interp, certPtr, - Tcl_NewStringObj( "issuer", -1) ); - Tcl_ListObjAppendElement( interp, certPtr, - Tcl_NewStringObj( issuer, -1) ); - - Tcl_ListObjAppendElement( interp, certPtr, - Tcl_NewStringObj( "notBefore", -1) ); - Tcl_ListObjAppendElement( interp, certPtr, - Tcl_NewStringObj( notBefore, -1) ); - - Tcl_ListObjAppendElement( interp, certPtr, - Tcl_NewStringObj( "notAfter", -1) ); - Tcl_ListObjAppendElement( interp, certPtr, - Tcl_NewStringObj( notAfter, -1) ); - - Tcl_ListObjAppendElement( interp, certPtr, - Tcl_NewStringObj( "serial", -1) ); - Tcl_ListObjAppendElement( interp, certPtr, - Tcl_NewStringObj( serial, -1) ); - - return certPtr; -} diff --git a/tls/win/makefile.vc b/tls/win/makefile.vc deleted file mode 100644 index 61ce762..0000000 --- a/tls/win/makefile.vc +++ /dev/null @@ -1,496 +0,0 @@ -# makefile.vc -- -*- Makefile -*- -# -# Microsoft Visual C++ makefile for use with nmake.exe v1.62+ (VC++ 5.0+) -# -# This makefile is based upon the Tcl 8.4 Makefile.vc and modified to -# make it suitable as a general package makefile. Look for the word EDIT -# which marks sections that may need modification. As a minumum you will -# need to change the PROJECT, DOTVERSION and DLLOBJS variables to values -# relevant to your package. -# -# See the file "license.terms" for information on usage and redistribution -# of this file, and for a DISCLAIMER OF ALL WARRANTIES. -# -# Copyright (c) 1995-1996 Sun Microsystems, Inc. -# Copyright (c) 1998-2000 Ajuba Solutions. -# Copyright (c) 2001 ActiveState Corporation. -# Copyright (c) 2001-2002 David Gravereaux. -# Copyright (c) 2003-2006 Pat Thoyts -# -#------------------------------------------------------------------------- -# RCS: @(#)$Id: makefile.vc,v 1.14 2015/06/06 09:07:08 apnadkarni Exp $ -#------------------------------------------------------------------------- - -# Check to see we are configured to build with MSVC (MSDEVDIR or MSVCDIR) -# or with the MS Platform SDK (MSSDK). Visual Studio .NET 2003 and 2005 define -# VCINSTALLDIR instead. The MSVC Toolkit release defines yet another. -!if !defined(MSDEVDIR) && !defined(MSVCDIR) && !defined(MSSDK) && !defined(VCINSTALLDIR) && !defined(VCToolkitInstallDir) -MSG = ^ -You need to run vcvars32.bat from Developer Studio or setenv.bat from the^ -Platform SDK first to setup the environment. Jump to this line to read^ -the build instructions. -!error $(MSG) -!endif - -#------------------------------------------------------------------------------ -# HOW TO USE this makefile: -# -# 1) It is now necessary to have %MSVCDir% set in the environment. This is -# used as a check to see if vcvars32.bat had been run prior to running -# nmake or during the installation of Microsoft Visual C++, MSVCDir had -# been set globally and the PATH adjusted. Either way is valid. -# -# You'll need to run vcvars32.bat contained in the MsDev's vc(98)/bin -# directory to setup the proper environment, if needed, for your current -# setup. This is a needed bootstrap requirement and allows the swapping of -# different environments to be easier. -# -# 2) To use the Platform SDK (not expressly needed), run setenv.bat after -# vcvars32.bat according to the instructions for it. This can also turn on -# the 64-bit compiler, if your SDK has it. -# -# 3) Targets are: -# all -- Builds everything. -# -- Builds the project (eg: nmake sample) -# test -- Builds and runs the test suite. -# install -- Installs the built binaries and libraries to $(INSTALLDIR) -# in an appropriate subdirectory. -# clean/realclean/distclean -- varying levels of cleaning. -# -# 4) Macros usable on the commandline: -# INSTALLDIR= -# Sets where to install Tcl from the built binaries. -# C:\Progra~1\Tcl is assumed when not specified. -# -# OPTS=static,msvcrt,staticpkg,threads,symbols,profile,loimpact,none -# Sets special options for the core. The default is for none. -# Any combination of the above may be used (comma separated). -# 'none' will over-ride everything to nothing. -# -# static = Builds a static library of the core instead of a -# dll. The shell will be static (and large), as well. -# msvcrt = Effects the static option only to switch it from -# using libcmt(d) as the C runtime [by default] to -# msvcrt(d). This is useful for static embedding -# support. -# staticpkg = Effects the static option only to switch -# tclshXX.exe to have the dde and reg extension linked -# inside it. -# nothreads = Turns off multithreading support (not recommended) -# thrdalloc = Use the thread allocator (shared global free pool). -# symbols = Adds symbols for step debugging. -# profile = Adds profiling hooks. Map file is assumed. -# loimpact = Adds a flag for how NT treats the heap to keep memory -# in use, low. This is said to impact alloc performance. -# -# STATS=memdbg,compdbg,none -# Sets optional memory and bytecode compiler debugging code added -# to the core. The default is for none. Any combination of the -# above may be used (comma separated). 'none' will over-ride -# everything to nothing. -# -# memdbg = Enables the debugging memory allocator. -# compdbg = Enables byte compilation logging. -# -# MACHINE=(IX86|IA64|ALPHA|AMD64) -# Set the machine type used for the compiler, linker, and -# resource compiler. This hook is needed to tell the tools -# when alternate platforms are requested. IX86 is the default -# when not specified. If the CPU environment variable has been -# set (ie: recent Platform SDK) then MACHINE is set from CPU. -# -# TMP_DIR= -# OUT_DIR= -# Hooks to allow the intermediate and output directories to be -# changed. $(OUT_DIR) is assumed to be -# $(BINROOT)\(Release|Debug) based on if symbols are requested. -# $(TMP_DIR) will de $(OUT_DIR)\ by default. -# -# TESTPAT= -# Reads the tests requested to be run from this file. -# -# CFG_ENCODING=encoding -# name of encoding for configuration information. Defaults -# to cp1252 -# -# 5) Examples: -# -# Basic syntax of calling nmake looks like this: -# nmake [-nologo] -f makefile.vc [target|macrodef [target|macrodef] [...]] -# -# Standard (no frills) -# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat -# Setting environment for using Microsoft Visual C++ tools. -# c:\tcl_src\win\>nmake -f makefile.vc all -# c:\tcl_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl -# -# Building for Win64 -# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat -# Setting environment for using Microsoft Visual C++ tools. -# c:\tcl_src\win\>c:\progra~1\platfo~1\setenv.bat /pre64 /RETAIL -# Targeting Windows pre64 RETAIL -# c:\tcl_src\win\>nmake -f makefile.vc MACHINE=IA64 -# -#------------------------------------------------------------------------------ -#============================================================================== -############################################################################### -#------------------------------------------------------------------------------ - -!if !exist("makefile.vc") -MSG = ^ -You must run this makefile only from the directory it is in.^ -Please `cd` to its location first. -!error $(MSG) -!endif - -#------------------------------------------------------------------------- -# Project specific information (EDIT) -# -# You should edit this with the name and version of your project. This -# information is used to generate the name of the package library and -# it's install location. -# -# For example, the sample extension is going to build sample04.dll and -# would install it into $(INSTALLDIR)\lib\sample04 -# -# You need to specify the object files that need to be linked into your -# binary here. -# -#------------------------------------------------------------------------- - -PROJECT = tls - -# Uncomment the following line if this is a Tk extension. -#PROJECT_REQUIRES_TK=1 -!include "rules.vc" - -DOTVERSION = 1.6.6 -VERSION = $(DOTVERSION:.=) -STUBPREFIX = $(PROJECT)stub - -DLLOBJS = \ - $(TMP_DIR)\tls.obj \ - $(TMP_DIR)\tlsBIO.obj \ - $(TMP_DIR)\tlsIO.obj \ - $(TMP_DIR)\tlsX509.obj \ -!if !$(STATIC_BUILD) - $(TMP_DIR)\tls.res -!endif - -#------------------------------------------------------------------------- -# Locate the OpenSSL library and headers -#------------------------------------------------------------------------- - -!ifndef OPENSSL -OPENSSL = c:\opt\openssl -!endif - -!ifndef SSL_INCLUDE_DIR -SSL_INCLUDE_DIR = $(OPENSSL)\include -!endif -!ifndef SSL_LIB_DIR -SSL_LIB_DIR = $(OPENSSL)\lib -!endif - -SSL_LIBS =-libpath:"$(SSL_LIB_DIR)" ssleay32.lib libeay32.lib - -SSL_CFLAGS =-DNO_IDEA=1 -DNO_RC5=1 - -!if !exist("$(SSL_LIB_DIR)\ssleay32.lib") -MSG = ^ -Failed to locate "$(SSL_LIB_DIR)\ssleay32.lib" -You must provide the path to your OpenSSL library.... -!error $(MSG) -!endif - -#------------------------------------------------------------------------- -# Target names and paths ( shouldn't need changing ) -#------------------------------------------------------------------------- - -BINROOT = . -ROOT = .. - -PRJIMPLIB = $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib -PRJLIBNAME = $(PROJECT)$(VERSION)$(SUFX).$(EXT) -PRJLIB = $(OUT_DIR)\$(PRJLIBNAME) - -PRJSTUBLIBNAME = $(STUBPREFIX)$(VERSION).lib -PRJSTUBLIB = $(OUT_DIR)\$(PRJSTUBLIBNAME) - -### Make sure we use backslash only. -PRJ_INSTALL_DIR = $(_INSTALLDIR)\$(PROJECT)$(DOTVERSION) -LIB_INSTALL_DIR = $(PRJ_INSTALL_DIR) -BIN_INSTALL_DIR = $(PRJ_INSTALL_DIR) -DOC_INSTALL_DIR = $(PRJ_INSTALL_DIR) -SCRIPT_INSTALL_DIR = $(PRJ_INSTALL_DIR) -INCLUDE_INSTALL_DIR = $(_TCLDIR)\include - -### The following paths CANNOT have spaces in them. -GENERICDIR = $(ROOT) -WINDIR = $(ROOT)\win -LIBDIR = $(ROOT) -DOCDIR = $(ROOT) -TOOLSDIR = $(ROOT)\tools -COMPATDIR = $(ROOT)\compat - -#--------------------------------------------------------------------- -# Compile flags -#--------------------------------------------------------------------- - -!if !$(DEBUG) -!if $(OPTIMIZING) -### This cranks the optimization level to maximize speed -cdebug = $(OPTIMIZATIONS) -!else -cdebug = -!endif -!else if "$(MACHINE)" == "IA64" #|| "$(MACHINE)" == "AMD64" -### Warnings are too many, can't support warnings into errors. -cdebug = -Zi -Od $(DEBUGFLAGS) -!else -cdebug = -Zi -WX $(DEBUGFLAGS) -!endif - -### Declarations common to all compiler options -cwarn = $(WARNINGS) -D _CRT_SECURE_NO_DEPRECATE -D _CRT_NONSTDC_NO_DEPRECATE -cflags = -nologo -c $(COMPILERFLAGS) $(cwarn) -Fp$(TMP_DIR)^\ - -!if $(MSVCRT) -!if $(DEBUG) && !$(UNCHECKED) -crt = -MDd -!else -crt = -MD -!endif -!else -!if $(DEBUG) && !$(UNCHECKED) -crt = -MTd -!else -crt = -MT -!endif -!endif - -!if !$(STATIC_BUILD) -cflags = $(cflags) -DUSE_TCL_STUBS -!if defined(TKSTUBLIB) -cflags = $(cflags) -DUSE_TK_STUBS -!endif -!endif - -INCLUDES = $(TCL_INCLUDES) -I"$(WINDIR)" -I"$(GENERICDIR)" \ - -I"$(SSL_INCLUDE_DIR)" -BASE_CFLAGS = $(cflags) $(cdebug) $(crt) $(INCLUDES) -CON_CFLAGS = $(cflags) $(cdebug) $(crt) -DCONSOLE -TCL_CFLAGS = -DPACKAGE_NAME="\"$(PROJECT)\"" \ - -DPACKAGE_VERSION="\"$(DOTVERSION)\"" \ - $(SSL_CFLAGS) \ - $(BASE_CFLAGS) $(OPTDEFINES) - -#--------------------------------------------------------------------- -# Link flags -#--------------------------------------------------------------------- - -!if $(DEBUG) -ldebug = -debug:full -debugtype:cv -!if $(MSVCRT) -ldebug = $(ldebug) -nodefaultlib:msvcrt -!endif -!else -ldebug = -release -opt:ref -opt:icf,3 -!endif - -### Declarations common to all linker options -lflags = -nologo -machine:$(MACHINE) $(LINKERFLAGS) $(ldebug) - -!if $(PROFILE) -lflags = $(lflags) -profile -!endif - -!if $(ALIGN98_HACK) && !$(STATIC_BUILD) -### Align sections for PE size savings. -lflags = $(lflags) -opt:nowin98 -!else if !$(ALIGN98_HACK) && $(STATIC_BUILD) -### Align sections for speed in loading by choosing the virtual page size. -lflags = $(lflags) -align:4096 -!endif - -!if $(LOIMPACT) -lflags = $(lflags) -ws:aggressive -!endif - -dlllflags = $(lflags) -dll -conlflags = $(lflags) -subsystem:console -guilflags = $(lflags) -subsystem:windows -!if !$(STATIC_BUILD) -baselibs = $(TCLSTUBLIB) -!if defined(TKSTUBLIB) -baselibs = $(baselibs) $(TKSTUBLIB) -!endif -!endif - -# Avoid 'unresolved external symbol __security_cookie' errors. -# c.f. http://support.microsoft.com/?id=894573 -!if "$(MACHINE)" == "IA64" || "$(MACHINE)" == "AMD64" -!if $(VCVERSION) >= 1400 && $(VCVERSION) < 1500 -baselibs = $(baselibs) bufferoverflowU.lib -!endif -!endif - -baselibs = $(baselibs) $(SSL_LIBS) ws2_32.lib user32.lib gdi32.lib advapi32.lib - -#--------------------------------------------------------------------- -# TclTest flags -#--------------------------------------------------------------------- - -!IF "$(TESTPAT)" != "" -TESTFLAGS = $(TESTFLAGS) -file $(TESTPAT) -!ENDIF - -#--------------------------------------------------------------------- -# Project specific targets (EDIT) -#--------------------------------------------------------------------- - -all: setup $(PROJECT) -$(PROJECT): setup $(OUT_DIR)\pkgIndex.tcl $(OUT_DIR)\tls.tcl $(PRJLIB) -install: install-binaries install-libraries install-docs - -test: setup $(PROJECT) - @set TCL_LIBRARY=$(TCL_LIBRARY:\=/) - @set TCLLIBPATH=$(OUT_DIR_PATH:\=/) -!if $(TCLINSTALL) - @set PATH=$(_TCLDIR)\bin;$(PATH) -!else - @set PATH=$(_TCLDIR)\win\$(BUILDDIRTOP);$(PATH) -!endif -!if "$(OS)" == "Windows_NT" || "$(MSVCDIR)" == "IDE" - $(DEBUGGER) $(TCLSH) "$(ROOT)/tests/all.tcl" $(TESTFLAGS) -!else - @echo Please wait while the tests are collected... - $(DEBUGGER) $(TCLSH) "$(ROOT)/tests/all.tcl" $(TESTFLAGS) > tests.log - type tests.log | more -!endif - -shell: setup $(PROJECT) - @set TCL_LIBRARY=$(TCL_LIBRARY:\=/) - @set TCLLIBPATH=$(OUT_DIR_PATH:\=/) -!if $(TCLINSTALL) - @set PATH=$(_TCLDIR)\bin;$(PATH) -!else - @set PATH=$(_TCLDIR)\win\$(BUILDDIRTOP);$(PATH) -!endif - $(DEBUGGER) $(TCLSH) $(SCRIPT) - -setup: - @if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR) - @if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR) - -# See /win/coffbase.txt for extension base addresses. -$(PRJLIB): $(DLLOBJS) -!if $(STATIC_BUILD) - $(lib32) -nologo -out:$@ @<< -$** -<< -!else - $(link32) $(dlllflags) -base:0x10780000 -out:$@ $(baselibs) @<< -$** -<< - $(_VC_MANIFEST_EMBED_DLL) - -@del $*.exp -!endif - -$(PRJSTUBLIB): $(PRJSTUBOBJS) - $(lib32) -nologo -out:$@ $(PRJSTUBOBJS) - -#--------------------------------------------------------------------- -# Implicit rules -#--------------------------------------------------------------------- - -{$(WINDIR)}.c{$(TMP_DIR)}.obj:: - $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<< -$< -<< - -{$(GENERICDIR)}.c{$(TMP_DIR)}.obj:: - $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<< -$< -<< - -{$(COMPATDIR)}.c{$(TMP_DIR)}.obj:: - $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<< -$< -<< - -{$(WINDIR)}.rc{$(TMP_DIR)}.res: - $(rc32) -fo $@ -r -i "$(GENERICDIR)" -D__WIN32__ \ - -DCOMMAVERSION=$(DOTVERSION:.=,),0 \ - -DDOTVERSION=\"$(DOTVERSION)\" \ - -DVERSION=\"$(VERSION)$(SUFX)\" \ -!if $(DEBUG) - -d DEBUG \ -!endif -!if $(TCL_THREADS) - -d TCL_THREADS \ -!endif -!if $(STATIC_BUILD) - -d STATIC_BUILD \ -!endif - $< - -.SUFFIXES: -.SUFFIXES:.c .rc - -#------------------------------------------------------------------------- -# Explicit dependency rules -# -#------------------------------------------------------------------------- - -.PHONY: $(OUT_DIR)\pkgIndex.tcl $(OUT_DIR)\tls.tcl - -$(OUT_DIR)\tls.tcl: $(GENERICDIR)\tls.tcl - @$(COPY) $** $@ - -$(OUT_DIR)\pkgIndex.tcl: - @type << > $@ -if {![package vsatisfies [package provide Tcl] 8.3]} {return} -package ifneeded $(PROJECT) $(DOTVERSION) "source \[file join [list $$dir] tls.tcl\] ; tls::initlib [list $$dir] $(PRJLIBNAME)" -<< - -#--------------------------------------------------------------------- -# Installation. (EDIT) -# -# You may need to modify this section to reflect the final distribution -# of your files and possibly to generate documentation. -# -#--------------------------------------------------------------------- - -install-binaries: - @echo Installing binaries to '$(SCRIPT_INSTALL_DIR)' - @if not exist "$(SCRIPT_INSTALL_DIR)" mkdir "$(SCRIPT_INSTALL_DIR)" - @$(CPY) $(PRJLIB) "$(SCRIPT_INSTALL_DIR)" >NUL - -install-libraries: - @echo Installing libraries to '$(SCRIPT_INSTALL_DIR)' - @if exist $(LIBDIR) $(CPY) $(LIBDIR)\tls.tcl "$(SCRIPT_INSTALL_DIR)" > NUL - @echo Installing package index in '$(SCRIPT_INSTALL_DIR)' - @$(CPY) $(OUT_DIR)\pkgIndex.tcl "$(SCRIPT_INSTALL_DIR)" - -install-docs: - @echo Installing documentation files to '$(DOC_INSTALL_DIR)' - @if exist $(DOCDIR) $(CPY) $(DOCDIR)\tls.htm "$(DOC_INSTALL_DIR)" >NUL - -#--------------------------------------------------------------------- -# Clean up -#--------------------------------------------------------------------- - -clean: - @if exist $(TMP_DIR)\nul $(RMDIR) $(TMP_DIR) - @if exist $(WINDIR)\version.vc del $(WINDIR)\version.vc - @if exist $(WINDIR)\vercl.i del $(WINDIR)\vercl.i - @if exist $(WINDIR)\vercl.x del $(WINDIR)\vercl.x - @if exist $(WINDIR)\_junk.pch del $(WINDIR)\_junk.pch - -realclean: clean - @if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR) - -distclean: realclean - @if exist $(WINDIR)\nmakehlp.exe del $(WINDIR)\nmakehlp.exe - @if exist $(WINDIR)\nmakehlp.obj del $(WINDIR)\nmakehlp.obj diff --git a/tls/win/nmakehlp.c b/tls/win/nmakehlp.c deleted file mode 100644 index ed7e970..0000000 --- a/tls/win/nmakehlp.c +++ /dev/null @@ -1,767 +0,0 @@ -/* - * ---------------------------------------------------------------------------- - * nmakehlp.c -- - * - * This is used to fix limitations within nmake and the environment. - * - * Copyright (c) 2002 by David Gravereaux. - * Copyright (c) 2006 by Pat Thoyts - * - * See the file "license.terms" for information on usage and redistribution of - * this file, and for a DISCLAIMER OF ALL WARRANTIES. - * - * ---------------------------------------------------------------------------- - * RCS: @(#) $Id: nmakehlp.c,v 1.4 2008/06/18 11:29:37 patthoyts Exp $ - * ---------------------------------------------------------------------------- - */ - -#define _CRT_SECURE_NO_DEPRECATE -#include -#define NO_SHLWAPI_GDI -#define NO_SHLWAPI_STREAM -#define NO_SHLWAPI_REG -#include -#pragma comment (lib, "user32.lib") -#pragma comment (lib, "kernel32.lib") -#pragma comment (lib, "shlwapi.lib") -#include -#include - -/* - * This library is required for x64 builds with _some_ versions of MSVC - */ -#if defined(_M_IA64) || defined(_M_AMD64) -#if _MSC_VER >= 1400 && _MSC_VER < 1500 -#pragma comment(lib, "bufferoverflowU") -#endif -#endif - -/* ISO hack for dumb VC++ */ -#ifdef _MSC_VER -#define snprintf _snprintf -#endif - - - -/* protos */ - -int CheckForCompilerFeature(const char *option); -int CheckForLinkerFeature(const char *option); -int IsIn(const char *string, const char *substring); -int GrepForDefine(const char *file, const char *string); -int SubstituteFile(const char *substs, const char *filename); -int QualifyPath(const char *path); -const char * GetVersionFromFile(const char *filename, const char *match); -DWORD WINAPI ReadFromPipe(LPVOID args); - -/* globals */ - -#define CHUNK 25 -#define STATICBUFFERSIZE 1000 -typedef struct { - HANDLE pipe; - char buffer[STATICBUFFERSIZE]; -} pipeinfo; - -pipeinfo Out = {INVALID_HANDLE_VALUE, '\0'}; -pipeinfo Err = {INVALID_HANDLE_VALUE, '\0'}; - -/* - * exitcodes: 0 == no, 1 == yes, 2 == error - */ - -int -main( - int argc, - char *argv[]) -{ - char msg[300]; - DWORD dwWritten; - int chars; - - /* - * Make sure children (cl.exe and link.exe) are kept quiet. - */ - - SetErrorMode(SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX); - - /* - * Make sure the compiler and linker aren't effected by the outside world. - */ - - SetEnvironmentVariable("CL", ""); - SetEnvironmentVariable("LINK", ""); - - if (argc > 1 && *argv[1] == '-') { - switch (*(argv[1]+1)) { - case 'c': - if (argc != 3) { - chars = snprintf(msg, sizeof(msg) - 1, - "usage: %s -c \n" - "Tests for whether cl.exe supports an option\n" - "exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]); - WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, - &dwWritten, NULL); - return 2; - } - return CheckForCompilerFeature(argv[2]); - case 'l': - if (argc != 3) { - chars = snprintf(msg, sizeof(msg) - 1, - "usage: %s -l \n" - "Tests for whether link.exe supports an option\n" - "exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]); - WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, - &dwWritten, NULL); - return 2; - } - return CheckForLinkerFeature(argv[2]); - case 'f': - if (argc == 2) { - chars = snprintf(msg, sizeof(msg) - 1, - "usage: %s -f \n" - "Find a substring within another\n" - "exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]); - WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, - &dwWritten, NULL); - return 2; - } else if (argc == 3) { - /* - * If the string is blank, there is no match. - */ - - return 0; - } else { - return IsIn(argv[2], argv[3]); - } - case 'g': - if (argc == 2) { - chars = snprintf(msg, sizeof(msg) - 1, - "usage: %s -g \n" - "grep for a #define\n" - "exitcodes: integer of the found string (no decimals)\n", - argv[0]); - WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, - &dwWritten, NULL); - return 2; - } - return GrepForDefine(argv[2], argv[3]); - case 's': - if (argc == 2) { - chars = snprintf(msg, sizeof(msg) - 1, - "usage: %s -s \n" - "Perform a set of string map type substutitions on a file\n" - "exitcodes: 0\n", - argv[0]); - WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, - &dwWritten, NULL); - return 2; - } - return SubstituteFile(argv[2], argv[3]); - case 'V': - if (argc != 4) { - chars = snprintf(msg, sizeof(msg) - 1, - "usage: %s -V filename matchstring\n" - "Extract a version from a file:\n" - "eg: pkgIndex.tcl \"package ifneeded http\"", - argv[0]); - WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, - &dwWritten, NULL); - return 0; - } - printf("%s\n", GetVersionFromFile(argv[2], argv[3])); - return 0; - case 'Q': - if (argc != 3) { - chars = snprintf(msg, sizeof(msg) - 1, - "usage: %s -q path\n" - "Emit the fully qualified path\n" - "exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]); - WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, - &dwWritten, NULL); - return 2; - } - return QualifyPath(argv[2]); - } - } - chars = snprintf(msg, sizeof(msg) - 1, - "usage: %s -c|-l|-f|-g|-V|-s|-Q ...\n" - "This is a little helper app to equalize shell differences between WinNT and\n" - "Win9x and get nmake.exe to accomplish its job.\n", - argv[0]); - WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, &dwWritten, NULL); - return 2; -} - -int -CheckForCompilerFeature( - const char *option) -{ - STARTUPINFO si; - PROCESS_INFORMATION pi; - SECURITY_ATTRIBUTES sa; - DWORD threadID; - char msg[300]; - BOOL ok; - HANDLE hProcess, h, pipeThreads[2]; - char cmdline[100]; - - hProcess = GetCurrentProcess(); - - ZeroMemory(&pi, sizeof(PROCESS_INFORMATION)); - ZeroMemory(&si, sizeof(STARTUPINFO)); - si.cb = sizeof(STARTUPINFO); - si.dwFlags = STARTF_USESTDHANDLES; - si.hStdInput = INVALID_HANDLE_VALUE; - - ZeroMemory(&sa, sizeof(SECURITY_ATTRIBUTES)); - sa.nLength = sizeof(SECURITY_ATTRIBUTES); - sa.lpSecurityDescriptor = NULL; - sa.bInheritHandle = FALSE; - - /* - * Create a non-inheritible pipe. - */ - - CreatePipe(&Out.pipe, &h, &sa, 0); - - /* - * Dupe the write side, make it inheritible, and close the original. - */ - - DuplicateHandle(hProcess, h, hProcess, &si.hStdOutput, 0, TRUE, - DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE); - - /* - * Same as above, but for the error side. - */ - - CreatePipe(&Err.pipe, &h, &sa, 0); - DuplicateHandle(hProcess, h, hProcess, &si.hStdError, 0, TRUE, - DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE); - - /* - * Base command line. - */ - - lstrcpy(cmdline, "cl.exe -nologo -c -TC -Zs -X -Fp.\\_junk.pch "); - - /* - * Append our option for testing - */ - - lstrcat(cmdline, option); - - /* - * Filename to compile, which exists, but is nothing and empty. - */ - - lstrcat(cmdline, " .\\nul"); - - ok = CreateProcess( - NULL, /* Module name. */ - cmdline, /* Command line. */ - NULL, /* Process handle not inheritable. */ - NULL, /* Thread handle not inheritable. */ - TRUE, /* yes, inherit handles. */ - DETACHED_PROCESS, /* No console for you. */ - NULL, /* Use parent's environment block. */ - NULL, /* Use parent's starting directory. */ - &si, /* Pointer to STARTUPINFO structure. */ - &pi); /* Pointer to PROCESS_INFORMATION structure. */ - - if (!ok) { - DWORD err = GetLastError(); - int chars = snprintf(msg, sizeof(msg) - 1, - "Tried to launch: \"%s\", but got error [%u]: ", cmdline, err); - - FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM|FORMAT_MESSAGE_IGNORE_INSERTS| - FORMAT_MESSAGE_MAX_WIDTH_MASK, 0L, err, 0, (LPVOID)&msg[chars], - (300-chars), 0); - WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg,lstrlen(msg), &err,NULL); - return 2; - } - - /* - * Close our references to the write handles that have now been inherited. - */ - - CloseHandle(si.hStdOutput); - CloseHandle(si.hStdError); - - WaitForInputIdle(pi.hProcess, 5000); - CloseHandle(pi.hThread); - - /* - * Start the pipe reader threads. - */ - - pipeThreads[0] = CreateThread(NULL, 0, ReadFromPipe, &Out, 0, &threadID); - pipeThreads[1] = CreateThread(NULL, 0, ReadFromPipe, &Err, 0, &threadID); - - /* - * Block waiting for the process to end. - */ - - WaitForSingleObject(pi.hProcess, INFINITE); - CloseHandle(pi.hProcess); - - /* - * Wait for our pipe to get done reading, should it be a little slow. - */ - - WaitForMultipleObjects(2, pipeThreads, TRUE, 500); - CloseHandle(pipeThreads[0]); - CloseHandle(pipeThreads[1]); - - /* - * Look for the commandline warning code in both streams. - * - in MSVC 6 & 7 we get D4002, in MSVC 8 we get D9002. - */ - - return !(strstr(Out.buffer, "D4002") != NULL - || strstr(Err.buffer, "D4002") != NULL - || strstr(Out.buffer, "D9002") != NULL - || strstr(Err.buffer, "D9002") != NULL - || strstr(Out.buffer, "D2021") != NULL - || strstr(Err.buffer, "D2021") != NULL); -} - -int -CheckForLinkerFeature( - const char *option) -{ - STARTUPINFO si; - PROCESS_INFORMATION pi; - SECURITY_ATTRIBUTES sa; - DWORD threadID; - char msg[300]; - BOOL ok; - HANDLE hProcess, h, pipeThreads[2]; - char cmdline[100]; - - hProcess = GetCurrentProcess(); - - ZeroMemory(&pi, sizeof(PROCESS_INFORMATION)); - ZeroMemory(&si, sizeof(STARTUPINFO)); - si.cb = sizeof(STARTUPINFO); - si.dwFlags = STARTF_USESTDHANDLES; - si.hStdInput = INVALID_HANDLE_VALUE; - - ZeroMemory(&sa, sizeof(SECURITY_ATTRIBUTES)); - sa.nLength = sizeof(SECURITY_ATTRIBUTES); - sa.lpSecurityDescriptor = NULL; - sa.bInheritHandle = TRUE; - - /* - * Create a non-inheritible pipe. - */ - - CreatePipe(&Out.pipe, &h, &sa, 0); - - /* - * Dupe the write side, make it inheritible, and close the original. - */ - - DuplicateHandle(hProcess, h, hProcess, &si.hStdOutput, 0, TRUE, - DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE); - - /* - * Same as above, but for the error side. - */ - - CreatePipe(&Err.pipe, &h, &sa, 0); - DuplicateHandle(hProcess, h, hProcess, &si.hStdError, 0, TRUE, - DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE); - - /* - * Base command line. - */ - - lstrcpy(cmdline, "link.exe -nologo "); - - /* - * Append our option for testing. - */ - - lstrcat(cmdline, option); - - ok = CreateProcess( - NULL, /* Module name. */ - cmdline, /* Command line. */ - NULL, /* Process handle not inheritable. */ - NULL, /* Thread handle not inheritable. */ - TRUE, /* yes, inherit handles. */ - DETACHED_PROCESS, /* No console for you. */ - NULL, /* Use parent's environment block. */ - NULL, /* Use parent's starting directory. */ - &si, /* Pointer to STARTUPINFO structure. */ - &pi); /* Pointer to PROCESS_INFORMATION structure. */ - - if (!ok) { - DWORD err = GetLastError(); - int chars = snprintf(msg, sizeof(msg) - 1, - "Tried to launch: \"%s\", but got error [%u]: ", cmdline, err); - - FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM|FORMAT_MESSAGE_IGNORE_INSERTS| - FORMAT_MESSAGE_MAX_WIDTH_MASK, 0L, err, 0, (LPVOID)&msg[chars], - (300-chars), 0); - WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg,lstrlen(msg), &err,NULL); - return 2; - } - - /* - * Close our references to the write handles that have now been inherited. - */ - - CloseHandle(si.hStdOutput); - CloseHandle(si.hStdError); - - WaitForInputIdle(pi.hProcess, 5000); - CloseHandle(pi.hThread); - - /* - * Start the pipe reader threads. - */ - - pipeThreads[0] = CreateThread(NULL, 0, ReadFromPipe, &Out, 0, &threadID); - pipeThreads[1] = CreateThread(NULL, 0, ReadFromPipe, &Err, 0, &threadID); - - /* - * Block waiting for the process to end. - */ - - WaitForSingleObject(pi.hProcess, INFINITE); - CloseHandle(pi.hProcess); - - /* - * Wait for our pipe to get done reading, should it be a little slow. - */ - - WaitForMultipleObjects(2, pipeThreads, TRUE, 500); - CloseHandle(pipeThreads[0]); - CloseHandle(pipeThreads[1]); - - /* - * Look for the commandline warning code in the stderr stream. - */ - - return !(strstr(Out.buffer, "LNK1117") != NULL || - strstr(Err.buffer, "LNK1117") != NULL || - strstr(Out.buffer, "LNK4044") != NULL || - strstr(Err.buffer, "LNK4044") != NULL); -} - -DWORD WINAPI -ReadFromPipe( - LPVOID args) -{ - pipeinfo *pi = (pipeinfo *) args; - char *lastBuf = pi->buffer; - DWORD dwRead; - BOOL ok; - - again: - if (lastBuf - pi->buffer + CHUNK > STATICBUFFERSIZE) { - CloseHandle(pi->pipe); - return (DWORD)-1; - } - ok = ReadFile(pi->pipe, lastBuf, CHUNK, &dwRead, 0L); - if (!ok || dwRead == 0) { - CloseHandle(pi->pipe); - return 0; - } - lastBuf += dwRead; - goto again; - - return 0; /* makes the compiler happy */ -} - -int -IsIn( - const char *string, - const char *substring) -{ - return (strstr(string, substring) != NULL); -} - -/* - * Find a specified #define by name. - * - * If the line is '#define TCL_VERSION "8.5"', it returns 85 as the result. - */ - -int -GrepForDefine( - const char *file, - const char *string) -{ - char s1[51], s2[51], s3[51]; - FILE *f = fopen(file, "rt"); - - if (f == NULL) { - return 0; - } - - do { - int r = fscanf(f, "%50s", s1); - - if (r == 1 && !strcmp(s1, "#define")) { - /* - * Get next two words. - */ - - r = fscanf(f, "%50s %50s", s2, s3); - if (r != 2) { - continue; - } - - /* - * Is the first word what we're looking for? - */ - - if (!strcmp(s2, string)) { - double d1; - - fclose(f); - - /* - * Add 1 past first double quote char. "8.5" - */ - - d1 = atof(s3 + 1); /* 8.5 */ - while (floor(d1) != d1) { - d1 *= 10.0; - } - return ((int) d1); /* 85 */ - } - } - } while (!feof(f)); - - fclose(f); - return 0; -} - -/* - * GetVersionFromFile -- - * Looks for a match string in a file and then returns the version - * following the match where a version is anything acceptable to - * package provide or package ifneeded. - */ - -const char * -GetVersionFromFile( - const char *filename, - const char *match) -{ - size_t cbBuffer = 100; - static char szBuffer[100]; - char *szResult = NULL; - FILE *fp = fopen(filename, "rt"); - - if (fp != NULL) { - /* - * Read data until we see our match string. - */ - - while (fgets(szBuffer, cbBuffer, fp) != NULL) { - LPSTR p, q; - - p = strstr(szBuffer, match); - if (p != NULL) { - /* - * Skip to first digit. - */ - - while (*p && !isdigit(*p)) { - ++p; - } - - /* - * Find ending whitespace. - */ - - q = p; - while (*q && (isalnum(*q) || *q == '.')) { - ++q; - } - - memcpy(szBuffer, p, q - p); - szBuffer[q-p] = 0; - szResult = szBuffer; - break; - } - } - fclose(fp); - } - return szResult; -} - -/* - * List helpers for the SubstituteFile function - */ - -typedef struct list_item_t { - struct list_item_t *nextPtr; - char * key; - char * value; -} list_item_t; - -/* insert a list item into the list (list may be null) */ -static list_item_t * -list_insert(list_item_t **listPtrPtr, const char *key, const char *value) -{ - list_item_t *itemPtr = malloc(sizeof(list_item_t)); - if (itemPtr) { - itemPtr->key = strdup(key); - itemPtr->value = strdup(value); - itemPtr->nextPtr = NULL; - - while(*listPtrPtr) { - listPtrPtr = &(*listPtrPtr)->nextPtr; - } - *listPtrPtr = itemPtr; - } - return itemPtr; -} - -static void -list_free(list_item_t **listPtrPtr) -{ - list_item_t *tmpPtr, *listPtr = *listPtrPtr; - while (listPtr) { - tmpPtr = listPtr; - listPtr = listPtr->nextPtr; - free(tmpPtr->key); - free(tmpPtr->value); - free(tmpPtr); - } -} - -/* - * SubstituteFile -- - * As windows doesn't provide anything useful like sed and it's unreliable - * to use the tclsh you are building against (consider x-platform builds - - * eg compiling AMD64 target from IX86) we provide a simple substitution - * option here to handle autoconf style substitutions. - * The substitution file is whitespace and line delimited. The file should - * consist of lines matching the regular expression: - * \s*\S+\s+\S*$ - * - * Usage is something like: - * nmakehlp -S << $** > $@ - * @PACKAGE_NAME@ $(PACKAGE_NAME) - * @PACKAGE_VERSION@ $(PACKAGE_VERSION) - * << - */ - -int -SubstituteFile( - const char *substitutions, - const char *filename) -{ - size_t cbBuffer = 1024; - static char szBuffer[1024], szCopy[1024]; - char *szResult = NULL; - list_item_t *substPtr = NULL; - FILE *fp, *sp; - - fp = fopen(filename, "rt"); - if (fp != NULL) { - - /* - * Build a list of substutitions from the first filename - */ - - sp = fopen(substitutions, "rt"); - if (sp != NULL) { - while (fgets(szBuffer, cbBuffer, sp) != NULL) { - char *ks, *ke, *vs, *ve; - ks = szBuffer; - while (ks && *ks && isspace(*ks)) ++ks; - ke = ks; - while (ke && *ke && !isspace(*ke)) ++ke; - vs = ke; - while (vs && *vs && isspace(*vs)) ++vs; - ve = vs; - while (ve && *ve && !(*ve == '\r' || *ve == '\n')) ++ve; - *ke = 0, *ve = 0; - list_insert(&substPtr, ks, vs); - } - fclose(sp); - } - - /* debug: dump the list */ -#ifdef _DEBUG - { - int n = 0; - list_item_t *p = NULL; - for (p = substPtr; p != NULL; p = p->nextPtr, ++n) { - fprintf(stderr, "% 3d '%s' => '%s'\n", n, p->key, p->value); - } - } -#endif - - /* - * Run the substitutions over each line of the input - */ - - while (fgets(szBuffer, cbBuffer, fp) != NULL) { - list_item_t *p = NULL; - for (p = substPtr; p != NULL; p = p->nextPtr) { - char *m = strstr(szBuffer, p->key); - if (m) { - char *cp, *op, *sp; - cp = szCopy; - op = szBuffer; - while (op != m) *cp++ = *op++; - sp = p->value; - while (sp && *sp) *cp++ = *sp++; - op += strlen(p->key); - while (*op) *cp++ = *op++; - *cp = 0; - memcpy(szBuffer, szCopy, sizeof(szCopy)); - } - } - printf(szBuffer); - } - - list_free(&substPtr); - } - fclose(fp); - return 0; -} - -/* - * QualifyPath -- - * - * This composes the current working directory with a provided path - * and returns the fully qualified and normalized path. - * Mostly needed to setup paths for testing. - */ - -int -QualifyPath( - const char *szPath) -{ - char szCwd[MAX_PATH + 1]; - char szTmp[MAX_PATH + 1]; - char *p; - GetCurrentDirectory(MAX_PATH, szCwd); - while ((p = strchr(szPath, '/')) && *p) - *p = '\\'; - PathCombine(szTmp, szCwd, szPath); - PathCanonicalize(szCwd, szTmp); - printf("%s\n", szCwd); - return 0; -} - -/* - * Local variables: - * mode: c - * c-basic-offset: 4 - * fill-column: 78 - * indent-tabs-mode: t - * tab-width: 8 - * End: - */ diff --git a/tls/win/rules.vc b/tls/win/rules.vc deleted file mode 100644 index 9d498ed..0000000 --- a/tls/win/rules.vc +++ /dev/null @@ -1,622 +0,0 @@ -#------------------------------------------------------------------------------ -# rules.vc -- -# -# Microsoft Visual C++ makefile include for decoding the commandline -# macros. This file does not need editing to build Tcl. -# -# This version is modified from the Tcl source version to support -# building extensions using nmake. -# -# See the file "license.terms" for information on usage and redistribution -# of this file, and for a DISCLAIMER OF ALL WARRANTIES. -# -# Copyright (c) 2001-2002 David Gravereaux. -# Copyright (c) 2003-2008 Patrick Thoyts -# -#------------------------------------------------------------------------------ -# RCS: @(#) $Id: rules.vc,v 1.4 2008/06/18 11:29:37 patthoyts Exp $ -#------------------------------------------------------------------------------ - -!ifndef _RULES_VC -_RULES_VC = 1 - -cc32 = $(CC) # built-in default. -link32 = link -lib32 = lib -rc32 = $(RC) # built-in default. - -!ifndef INSTALLDIR -### Assume the normal default. -_INSTALLDIR = C:\Program Files\Tcl -!else -### Fix the path separators. -_INSTALLDIR = $(INSTALLDIR:/=\) -!endif - -!ifndef MACHINE -!if "$(CPU)" == "" || "$(CPU)" == "i386" -MACHINE = IX86 -!else -MACHINE = $(CPU) -!endif -!endif - -!ifndef CFG_ENCODING -CFG_ENCODING = \"cp1252\" -!endif - -#---------------------------------------------------------- -# Set the proper copy method to avoid overwrite questions -# to the user when copying files and selecting the right -# "delete all" method. -#---------------------------------------------------------- - -!if "$(OS)" == "Windows_NT" -RMDIR = rmdir /S /Q -ERRNULL = 2>NUL -!if ![ver | find "4.0" > nul] -CPY = echo y | xcopy /i >NUL -COPY = copy >NUL -!else -CPY = xcopy /i /y >NUL -COPY = copy /y >NUL -!endif -!else # "$(OS)" != "Windows_NT" -CPY = xcopy /i >_JUNK.OUT # On Win98 NUL does not work here. -COPY = copy >_JUNK.OUT # On Win98 NUL does not work here. -RMDIR = deltree /Y -NULL = \NUL # Used in testing directory existence -ERRNULL = >NUL # Win9x shell cannot redirect stderr -!endif -MKDIR = mkdir - -!message =============================================================================== - -#---------------------------------------------------------- -# build the helper app we need to overcome nmake's limiting -# environment. -#---------------------------------------------------------- - -!if !exist(nmakehlp.exe) -!if [$(cc32) -nologo nmakehlp.c -link -subsystem:console > nul] -!endif -!endif - -#---------------------------------------------------------- -# Test for compiler features -#---------------------------------------------------------- - -### test for optimizations -!if [nmakehlp -c -Ot] -!message *** Compiler has 'Optimizations' -OPTIMIZING = 1 -!else -!message *** Compiler does not have 'Optimizations' -OPTIMIZING = 0 -!endif - -OPTIMIZATIONS = - -!if [nmakehlp -c -Ot] -OPTIMIZATIONS = $(OPTIMIZATIONS) -Ot -!endif - -!if [nmakehlp -c -Oi] -OPTIMIZATIONS = $(OPTIMIZATIONS) -Oi -!endif - -!if [nmakehlp -c -Op] -OPTIMIZATIONS = $(OPTIMIZATIONS) -Op -!endif - -!if [nmakehlp -c -fp:strict] -OPTIMIZATIONS = $(OPTIMIZATIONS) -fp:strict -!endif - -!if [nmakehlp -c -Gs] -OPTIMIZATIONS = $(OPTIMIZATIONS) -Gs -!endif - -!if [nmakehlp -c -GS] -OPTIMIZATIONS = $(OPTIMIZATIONS) -GS -!endif - -!if [nmakehlp -c -GL] -OPTIMIZATIONS = $(OPTIMIZATIONS) -GL -!endif - -DEBUGFLAGS = - -!if [nmakehlp -c -RTC1] -DEBUGFLAGS = $(DEBUGFLAGS) -RTC1 -!elseif [nmakehlp -c -GZ] -DEBUGFLAGS = $(DEBUGFLAGS) -GZ -!endif - -COMPILERFLAGS =-W3 - -# In v13 -GL and -YX are incompatible. -!if [nmakehlp -c -YX] -!if ![nmakehlp -c -GL] -OPTIMIZATIONS = $(OPTIMIZATIONS) -YX -!endif -!endif - -!if "$(MACHINE)" == "IX86" -### test for pentium errata -!if [nmakehlp -c -QI0f] -!message *** Compiler has 'Pentium 0x0f fix' -COMPILERFLAGS = $(COMPILERFLAGSS) -QI0f -!else -!message *** Compiler does not have 'Pentium 0x0f fix' -!endif -!endif - -!if "$(MACHINE)" == "IA64" -### test for Itanium errata -!if [nmakehlp -c -QIA64_Bx] -!message *** Compiler has 'B-stepping errata workarounds' -COMPILERFLAGS = $(COMPILERFLAGS) -QIA64_Bx -!else -!message *** Compiler does not have 'B-stepping errata workarounds' -!endif -!endif - -!if "$(MACHINE)" == "IX86" -### test for -align:4096, when align:512 will do. -!if [nmakehlp -l -opt:nowin98] -!message *** Linker has 'Win98 alignment problem' -ALIGN98_HACK = 1 -!else -!message *** Linker does not have 'Win98 alignment problem' -ALIGN98_HACK = 0 -!endif -!else -ALIGN98_HACK = 0 -!endif - -LINKERFLAGS = - -!if [nmakehlp -l -ltcg] -LINKERFLAGS =-ltcg -!endif - -#---------------------------------------------------------- -# MSVC8 (ships with Visual Studio 2005) generates a manifest -# file that we should link into the binaries. This is how. -#---------------------------------------------------------- - -_VC_MANIFEST_EMBED_EXE= -_VC_MANIFEST_EMBED_DLL= -VCVER=0 -!if ![echo VCVERSION=_MSC_VER > vercl.x] \ - && ![cl -nologo -TC -P vercl.x $(ERRNULL)] -!include vercl.i -!if $(VCVERSION) >= 1500 -VCVER=9 -!elseif $(VCVERSION) >= 1400 -VCVER=8 -!elseif $(VCVERSION) >= 1300 -VCVER=7 -!elseif $(VCVERSION) >= 1200 -VCVER=6 -!endif -!endif - -# Since MSVC8 we must deal with manifest resources. -!if $(VCVERSION) >= 1400 -_VC_MANIFEST_EMBED_EXE=if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;1 -_VC_MANIFEST_EMBED_DLL=if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;2 -!endif - -#---------------------------------------------------------- -# Decode the options requested. -#---------------------------------------------------------- - -!if "$(OPTS)" == "" || [nmakehlp -f "$(OPTS)" "none"] -STATIC_BUILD = 0 -TCL_THREADS = 1 -DEBUG = 0 -PROFILE = 0 -MSVCRT = 0 -LOIMPACT = 0 -TCL_USE_STATIC_PACKAGES = 0 -USE_THREAD_ALLOC = 1 -USE_THREAD_STORAGE = 1 -UNCHECKED = 0 -!else -!if [nmakehlp -f $(OPTS) "static"] -!message *** Doing static -STATIC_BUILD = 1 -!else -STATIC_BUILD = 0 -!endif -!if [nmakehlp -f $(OPTS) "msvcrt"] -!message *** Doing msvcrt -MSVCRT = 1 -!else -MSVCRT = 0 -!endif -!if [nmakehlp -f $(OPTS) "staticpkg"] -!message *** Doing staticpkg -TCL_USE_STATIC_PACKAGES = 1 -!else -TCL_USE_STATIC_PACKAGES = 0 -!endif -!if [nmakehlp -f $(OPTS) "nothreads"] -!message *** Compile explicitly for non-threaded tcl -TCL_THREADS = 0 -!else -TCL_THREADS = 1 -!endif -!if [nmakehlp -f $(OPTS) "symbols"] -!message *** Doing symbols -DEBUG = 1 -!else -DEBUG = 0 -!endif -!if [nmakehlp -f $(OPTS) "profile"] -!message *** Doing profile -PROFILE = 1 -!else -PROFILE = 0 -!endif -!if [nmakehlp -f $(OPTS) "loimpact"] -!message *** Doing loimpact -LOIMPACT = 1 -!else -LOIMPACT = 0 -!endif -!if [nmakehlp -f $(OPTS) "thrdalloc"] -!message *** Doing thrdalloc -USE_THREAD_ALLOC = 1 -!else -USE_THREAD_ALLOC = 0 -!endif -!if [nmakehlp -f $(OPTS) "thrdstorage"] -!message *** Doing thrdstorage -USE_THREAD_STORAGE = 1 -!else -USE_THREAD_STORAGE = 0 -!endif -!if [nmakehlp -f $(OPTS) "unchecked"] -!message *** Doing unchecked -UNCHECKED = 1 -!else -UNCHECKED = 0 -!endif -!endif - - -!if !$(STATIC_BUILD) -# Make sure we don't build overly fat DLLs. -MSVCRT = 1 -# We shouldn't statically put the extensions inside the shell when dynamic. -TCL_USE_STATIC_PACKAGES = 0 -!endif - - -#---------------------------------------------------------- -# Figure-out how to name our intermediate and output directories. -# We wouldn't want different builds to use the same .obj files -# by accident. -#---------------------------------------------------------- - -#---------------------------------------- -# Naming convention: -# t = full thread support. -# s = static library (as opposed to an -# import library) -# g = linked to the debug enabled C -# run-time. -# x = special static build when it -# links to the dynamic C run-time. -#---------------------------------------- -SUFX = sgx - -!if $(DEBUG) -BUILDDIRTOP = Debug -!else -BUILDDIRTOP = Release -!endif - -!if "$(MACHINE)" != "IX86" -BUILDDIRTOP =$(BUILDDIRTOP)_$(MACHINE) -!endif -!if $(VCVER) > 6 -BUILDDIRTOP =$(BUILDDIRTOP)_VC$(VCVER) -!endif - -!if !$(DEBUG) || $(DEBUG) && $(UNCHECKED) -SUFX = $(SUFX:g=) -!endif - -TMP_DIRFULL = .\$(BUILDDIRTOP)\$(PROJECT)_ThreadedDynamicStaticX - -!if !$(STATIC_BUILD) -TMP_DIRFULL = $(TMP_DIRFULL:Static=) -SUFX = $(SUFX:s=) -EXT = dll -!if $(MSVCRT) -TMP_DIRFULL = $(TMP_DIRFULL:X=) -SUFX = $(SUFX:x=) -!endif -!else -TMP_DIRFULL = $(TMP_DIRFULL:Dynamic=) -EXT = lib -!if !$(MSVCRT) -TMP_DIRFULL = $(TMP_DIRFULL:X=) -SUFX = $(SUFX:x=) -!endif -!endif - -!if !$(TCL_THREADS) -TMP_DIRFULL = $(TMP_DIRFULL:Threaded=) -SUFX = $(SUFX:t=) -!endif - -!ifndef TMP_DIR -TMP_DIR = $(TMP_DIRFULL) -!ifndef OUT_DIR -OUT_DIR = .\$(BUILDDIRTOP) -!endif -!else -!ifndef OUT_DIR -OUT_DIR = $(TMP_DIR) -!endif -!endif - - -#---------------------------------------------------------- -# Decode the statistics requested. -#---------------------------------------------------------- - -!if "$(STATS)" == "" || [nmakehlp -f "$(STATS)" "none"] -TCL_MEM_DEBUG = 0 -TCL_COMPILE_DEBUG = 0 -!else -!if [nmakehlp -f $(STATS) "memdbg"] -!message *** Doing memdbg -TCL_MEM_DEBUG = 1 -!else -TCL_MEM_DEBUG = 0 -!endif -!if [nmakehlp -f $(STATS) "compdbg"] -!message *** Doing compdbg -TCL_COMPILE_DEBUG = 1 -!else -TCL_COMPILE_DEBUG = 0 -!endif -!endif - - -#---------------------------------------------------------- -# Decode the checks requested. -#---------------------------------------------------------- - -!if "$(CHECKS)" == "" || [nmakehlp -f "$(CHECKS)" "none"] -TCL_NO_DEPRECATED = 0 -WARNINGS = -W3 -!else -!if [nmakehlp -f $(CHECKS) "nodep"] -!message *** Doing nodep check -TCL_NO_DEPRECATED = 1 -!else -TCL_NO_DEPRECATED = 0 -!endif -!if [nmakehlp -f $(CHECKS) "fullwarn"] -!message *** Doing full warnings check -WARNINGS = -W4 -!if [nmakehlp -l -warn:3] -LINKERFLAGS = $(LINKERFLAGS) -warn:3 -!endif -!else -WARNINGS = -W3 -!endif -!if [nmakehlp -f $(CHECKS) "64bit"] && [nmakehlp -c -Wp64] -!message *** Doing 64bit portability warnings -WARNINGS = $(WARNINGS) -Wp64 -!endif -!endif - -#---------------------------------------------------------- -# Set our defines now armed with our options. -#---------------------------------------------------------- - -OPTDEFINES = -DTCL_CFGVAL_ENCODING=$(CFG_ENCODING) -DSTDC_HEADERS - -!if $(TCL_MEM_DEBUG) -OPTDEFINES = $(OPTDEFINES) -DTCL_MEM_DEBUG -!endif -!if $(TCL_COMPILE_DEBUG) -OPTDEFINES = $(OPTDEFINES) -DTCL_COMPILE_DEBUG -DTCL_COMPILE_STATS -!endif -!if $(TCL_THREADS) -OPTDEFINES = $(OPTDEFINES) -DTCL_THREADS=1 -!if $(USE_THREAD_ALLOC) -OPTDEFINES = $(OPTDEFINES) -DUSE_THREAD_ALLOC=1 -!endif -!if $(USE_THREAD_STORAGE) -OPTDEFINES = $(OPTDEFINES) -DUSE_THREAD_STORAGE=1 -!endif -!endif -!if $(STATIC_BUILD) -OPTDEFINES = $(OPTDEFINES) -DSTATIC_BUILD -!endif -!if $(TCL_NO_DEPRECATED) -OPTDEFINES = $(OPTDEFINES) -DTCL_NO_DEPRECATED -!endif - -!if $(DEBUG) -OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_DEBUG -!elseif $(OPTIMIZING) -OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_OPTIMIZED -!endif -!if $(PROFILE) -OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_PROFILED -!endif -!if "$(MACHINE)" == "IA64" || "$(MACHINE)" == "AMD64" -OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_DO64BIT -!endif - - -#---------------------------------------------------------- -# Get common info used when building extensions. -#---------------------------------------------------------- - -!if "$(PROJECT)" != "tcl" - -# If INSTALLDIR set to tcl root dir then reset to the lib dir. -!if exist("$(_INSTALLDIR)\include\tcl.h") -_INSTALLDIR=$(_INSTALLDIR)\lib -!endif - -!if !defined(TCLDIR) -!if exist("$(_INSTALLDIR)\..\include\tcl.h") -TCLINSTALL = 1 -_TCLDIR = $(_INSTALLDIR)\.. -_TCL_H = $(_INSTALLDIR)\..\include\tcl.h -TCLDIR = $(_INSTALLDIR)\.. -!else -MSG=^ -Failed to find tcl.h. Set the TCLDIR macro. -!error $(MSG) -!endif -!else -_TCLDIR = $(TCLDIR:/=\) -!if exist("$(_TCLDIR)\include\tcl.h") -TCLINSTALL = 1 -_TCL_H = $(_TCLDIR)\include\tcl.h -!elseif exist("$(_TCLDIR)\generic\tcl.h") -TCLINSTALL = 0 -_TCL_H = $(_TCLDIR)\generic\tcl.h -!else -MSG =^ -Failed to find tcl.h. The TCLDIR macro does not appear correct. -!error $(MSG) -!endif -!endif - -!if [echo REM = This file is generated from rules.vc > version.vc] -!endif -!if exist("$(_TCL_H)") -!if [echo TCL_DOTVERSION = \>> version.vc] \ - && [nmakehlp -V "$(_TCL_H)" TCL_VERSION >> version.vc] -!endif -!endif -!include version.vc -TCL_VERSION = $(TCL_DOTVERSION:.=) - -!if $(TCLINSTALL) -TCLSH = "$(_TCLDIR)\bin\tclsh$(TCL_VERSION)$(SUFX).exe" -!if !exist($(TCLSH)) && $(TCL_THREADS) -TCLSH = "$(_TCLDIR)\bin\tclsh$(TCL_VERSION)t$(SUFX).exe" -!endif -TCLSTUBLIB = "$(_TCLDIR)\lib\tclstub$(TCL_VERSION).lib" -TCLIMPLIB = "$(_TCLDIR)\lib\tcl$(TCL_VERSION)$(SUFX).lib" -TCL_LIBRARY = $(_TCLDIR)\lib -TCL_INCLUDES = -I"$(_TCLDIR)\include" -!else -TCLSH = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclsh$(TCL_VERSION)$(SUFX).exe" -!if !exist($(TCLSH)) && $(TCL_THREADS) -TCLSH = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclsh$(TCL_VERSION)t$(SUFX).exe" -!endif -TCLSTUBLIB = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclstub$(TCL_VERSION).lib" -TCLIMPLIB = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tcl$(TCL_VERSION)$(SUFX).lib" -TCL_LIBRARY = $(_TCLDIR)\library -TCL_INCLUDES = -I"$(_TCLDIR)\generic" -I"$(_TCLDIR)\win" -!endif - -!endif - -#---------------------------------------------------------- -# Optionally check for Tk info for building extensions. -#---------------------------------------------------------- - -!ifdef PROJECT_REQUIRES_TK -!if "$(PROJECT)" != "tcl" && "$(PROJECT)" != "tk" - -!if !defined(TKDIR) -!if exist("$(_INSTALLDIR)\..\include\tk.h") -TKINSTALL = 1 -_TKDIR = $(_INSTALLDIR)\.. -_TK_H = $(_TKDIR)\include\tk.h -TKDIR = $(_TKDIR) -!elseif exist("$(_TCLDIR)\include\tk.h") -TKINSTALL = 1 -_TKDIR = $(_TCLDIR) -_TK_H = $(_TKDIR)\include\tk.h -TKDIR = $(_TKDIR) -!endif -!else -_TKDIR = $(TKDIR:/=\) -!if exist("$(_TKDIR)\include\tk.h") -TKINSTALL = 1 -_TK_H = $(_TKDIR)\include\tk.h -!elseif exist("$(_TKDIR)\generic\tk.h") -TKINSTALL = 0 -_TK_H = $(_TKDIR)\generic\tk.h -!else -MSG =^ -Failed to find tk.h. The TKDIR macro does not appear correct. -!error $(MSG) -!endif -!endif - -!if defined(TKDIR) -TK_DOTVERSION = 8.4 -!if exist("$(_TK_H)") -!if [echo TK_DOTVERSION = \>> version.vc] \ - && [nmakehlp -V "$(_TK_H)" TK_VERSION >> version.vc] -!endif -!endif -!include version.vc -TK_VERSION = $(TK_DOTVERSION:.=) - -!if $(TKINSTALL) -WISH = "$(_TKDIR)\bin\wish$(TK_VERSION)$(SUFX).exe" -!if !exist($(WISH)) && $(TCL_THREADS) -WISH = "$(_TKDIR)\bin\wish$(TK_VERSION)t$(SUFX).exe" -!endif -TKSTUBLIB = "$(_TKDIR)\lib\tkstub$(TK_VERSION).lib" -TKIMPLIB = "$(_TKDIR)\lib\tk$(TK_VERSION)$(SUFX).lib" -TK_INCLUDES = -I"$(_TKDIR)\include" -TK_LIBRARY = $(_TKDIR)\lib -!else -WISH = "$(_TKDIR)\win\$(BUILDDIRTOP)\wish$(TCL_VERSION)$(SUFX).exe" -!if !exist($(WISH)) && $(TCL_THREADS) -WISH = "$(_TKDIR)\win\$(BUILDDIRTOP)\wish$(TCL_VERSION)t$(SUFX).exe" -!endif -TKSTUBLIB = "$(_TKDIR)\win\$(BUILDDIRTOP)\tkstub$(TCL_VERSION).lib" -TKIMPLIB = "$(_TKDIR)\win\$(BUILDDIRTOP)\tk$(TCL_VERSION)$(SUFX).lib" -TK_INCLUDES = -I"$(_TKDIR)\generic" -I"$(_TKDIR)\win" -I"$(_TKDIR)\xlib" -TK_LIBRARY = $(_TKDIR)\library -!endif - -!endif -!endif -!endif - - -#---------------------------------------------------------- -# Setup the fully qualified OUT_DIR path as OUT_DIR_PATH -#---------------------------------------------------------- -!if [echo OUT_DIR_PATH = \>> version.vc] \ - && [nmakehlp -Q "$(OUT_DIR)" >> version.vc] -!endif -!include version.vc - - -#---------------------------------------------------------- -# Display stats being used. -#---------------------------------------------------------- - -!message *** Intermediate directory will be '$(TMP_DIR)' -!message *** Output directory will be '$(OUT_DIR)' -!message *** Suffix for binaries will be '$(SUFX)' -!message *** Optional defines are '$(OPTDEFINES)' -!message *** Compiler version $(VCVER). Target machine is $(MACHINE) -!message *** Compiler options '$(COMPILERFLAGS) $(OPTIMIZATIONS) $(DEBUGFLAGS) $(WARNINGS)' -!message *** Link options '$(LINKERFLAGS)' - -!endif diff --git a/tls/win/tls.rc b/tls/win/tls.rc deleted file mode 100644 index 3f707b8..0000000 --- a/tls/win/tls.rc +++ /dev/null @@ -1,40 +0,0 @@ -// tls.rc - Copyright (C) 2004 Pat Thoyts -// -// Note: the version numbers in here are all provided from the makefile. -// No editing required. -// -// $Id: tls.rc,v 1.1 2004/12/17 16:02:06 patthoyts Exp $ - -#include - -VS_VERSION_INFO VERSIONINFO - FILEVERSION COMMAVERSION - PRODUCTVERSION COMMAVERSION - FILEFLAGSMASK 0x3fL -#ifdef DEBUG - FILEFLAGS VS_FF_DEBUG -#else - FILEFLAGS 0x0L -#endif - FILEOS VOS__WINDOWS32 - FILETYPE VFT_DLL - FILESUBTYPE 0x0L -BEGIN - BLOCK "StringFileInfo" - BEGIN - BLOCK "040904b0" /* LANG_ENGLISH/SUBLANG_ENGLISH_US, Unicode CP */ - BEGIN - VALUE "FileDescription", "SSL and TLS support for Tcl\0" - VALUE "OriginalFilename", "tls" VERSION ".dll\0" - VALUE "FileVersion", DOTVERSION "\0" - VALUE "LegalCopyright", "Copyright \251 1997-1999 Matt Newman, et al.\0" - VALUE "ProductName", "TLS " DOTVERSION " for Windows\0" - VALUE "ProductVersion", DOTVERSION "\0" - VALUE "Comments", "http://sourceforge.net/projects/tls\0" - END - END - BLOCK "VarFileInfo" - BEGIN - VALUE "Translation", 0x409, 1200 - END -END -- cgit v0.12