From bfdb956a12440632b94ee8f7ecc7e1787883957f Mon Sep 17 00:00:00 2001 From: William Joye Date: Wed, 19 Oct 2016 14:54:14 -0400 Subject: Initial commit --- macosx/Makefile.in | 130 ++ macosx/aclocal.m4 | 23 + macosx/configure | 3025 ++++++++++++++++++++++++++++ macosx/configure.in | 51 + macosx/tclconfig/CVS/Entries | 5 + macosx/tclconfig/CVS/Repository | 1 + macosx/tclconfig/CVS/Root | 1 + macosx/tclconfig/ChangeLog | 980 +++++++++ macosx/tclconfig/README.txt | 26 + macosx/tclconfig/install-sh | 528 +++++ macosx/tclconfig/tcl.m4 | 4150 +++++++++++++++++++++++++++++++++++++++ unix/Makefile.in | 73 + unix/aclocal.m4 | 9 + unix/configure | 3075 +++++++++++++++++++++++++++++ unix/configure.in | 72 + unix/tclconfig/CVS/Entries | 5 + unix/tclconfig/CVS/Repository | 1 + unix/tclconfig/CVS/Root | 1 + unix/tclconfig/ChangeLog | 980 +++++++++ unix/tclconfig/README.txt | 26 + unix/tclconfig/install-sh | 528 +++++ unix/tclconfig/tcl.m4 | 4150 +++++++++++++++++++++++++++++++++++++++ win/Makefile.in | 158 ++ win/aclocal.m4 | 9 + win/configure | 3025 ++++++++++++++++++++++++++++ win/configure.in | 51 + win/tclconfig/CVS/Entries | 5 + win/tclconfig/CVS/Repository | 1 + win/tclconfig/CVS/Root | 1 + win/tclconfig/ChangeLog | 980 +++++++++ win/tclconfig/README.txt | 26 + win/tclconfig/install-sh | 528 +++++ win/tclconfig/tcl.m4 | 4150 +++++++++++++++++++++++++++++++++++++++ 33 files changed, 26774 insertions(+) create mode 100644 macosx/Makefile.in create mode 100755 macosx/aclocal.m4 create mode 100755 macosx/configure create mode 100755 macosx/configure.in create mode 100644 macosx/tclconfig/CVS/Entries create mode 100644 macosx/tclconfig/CVS/Repository create mode 100644 macosx/tclconfig/CVS/Root create mode 100644 macosx/tclconfig/ChangeLog create mode 100644 macosx/tclconfig/README.txt create mode 100755 macosx/tclconfig/install-sh create mode 100644 macosx/tclconfig/tcl.m4 create mode 100644 unix/Makefile.in create mode 100755 unix/aclocal.m4 create mode 100755 unix/configure create mode 100755 unix/configure.in create mode 100644 unix/tclconfig/CVS/Entries create mode 100644 unix/tclconfig/CVS/Repository create mode 100644 unix/tclconfig/CVS/Root create mode 100644 unix/tclconfig/ChangeLog create mode 100644 unix/tclconfig/README.txt create mode 100755 unix/tclconfig/install-sh create mode 100644 unix/tclconfig/tcl.m4 create mode 100644 win/Makefile.in create mode 100755 win/aclocal.m4 create mode 100755 win/configure create mode 100755 win/configure.in create mode 100644 win/tclconfig/CVS/Entries create mode 100644 win/tclconfig/CVS/Repository create mode 100644 win/tclconfig/CVS/Root create mode 100644 win/tclconfig/ChangeLog create mode 100644 win/tclconfig/README.txt create mode 100755 win/tclconfig/install-sh create mode 100644 win/tclconfig/tcl.m4 diff --git a/macosx/Makefile.in b/macosx/Makefile.in new file mode 100644 index 0000000..509f1e3 --- /dev/null +++ b/macosx/Makefile.in @@ -0,0 +1,130 @@ +OS = @OS@ +ARCH = @ARCH@ +ROOT = @ROOT@ +JOBS = @CORES@ + +WITHTCL =--with-tcl=$(ROOT)/build/tcl/Development +WITHTK =--with-tk=$(ROOT)/build/tk/Development $(WITHTCL) +CACHE =--config-cache --cache-file=../config.cache + +include ./make.include + +#--------------------------defines + +DS9APP =SAOImage\ DS9\ $(DS9VERSION) + +TCLFILES= \ + tcl$(TCLVER)/generic/tcl.h \ + tcl$(TCLVER)/generic/tclDecls.h \ + tcl$(TCLVER)/generic/tclPlatDecls.h + +TKFILES = \ + tk$(TCLVER)/generic/tk.h \ + tk$(TCLVER)/generic/tkDecls.h \ + tk$(TCLVER)/generic/tkPlatDecls.h \ + tk$(TCLVER)/generic/tkIntXlibDecls.h \ + tk$(TCLVER)/macosx/tkMacOSX.h + +#--------------------------build + +.PHONY : saods9 tcl tk tkmacosx + +saods9 : dirs tcl tk \ + tclcheckdns tcliis tclsignal \ + tclzvfs tclxml xpa \ + tkblt tktable tkimg \ + tkmpeg tkhtml1 tkcon \ + tkmacosx \ + tksao ds9 + +tcl : tcl$(TCLVER)/macosx/Makefile + @echo "" + @echo "*** Install tcl$(TCLVER) ***" + $(MAKE) -C tcl$(TCLVER)/macosx -j $(JOBS) + +# install include, lib + cp -p $(TCLFILES) include/. + cp -p build/tcl/Tcl.framework/libtclstub8.6.a lib/. + cp -rp build/tcl/Tcl.framework/Versions/8.6/Resources/Scripts lib/tcl8.6 + cp -rp build/tcl/Tcl.framework/Versions/8.6/Resources/tcl8 lib/. + +# we need a working tclsh later + cp -p build/tcl/tclsh8.6 bin/. + install_name_tool -change /Library/Frameworks/Tcl.framework/Versions/8.6/Tcl @executable_path/../build/tcl/Tcl.framework/Tcl bin/tclsh8.6 + +tcl$(TCLVER)/macosx/Makefile : + @echo "" + @echo "*** Configure tcl$(TCLVER) ***" + cd tcl$(TCLVER)/macosx; \ + ./configure \ + --enable-64bit \ + --enable-symbols \ + --config-cache --cache-file=../../config.cache + +tk : tk$(TCLVER)/macosx/Makefile + @echo "" + @echo "*** Installing tk$(TCLVER) ***" + $(MAKE) -C tk$(TCLVER)/macosx -j $(JOBS) + +# install include, lib + cp -p $(TKFILES) include/. + cp -p build/tk/Tk.framework/libtkstub8.6.a lib/. + cp -rp build/tk/Tk.framework/Versions/8.6/Resources/Scripts lib/tk8.6 + +# fix wish8.6 + cp -p build/tk/wish8.6 bin/. + install_name_tool -change /Library/Frameworks/Tcl.framework/Versions/8.6/Tcl @executable_path/../build/tcl/Tcl.framework/Tcl bin/wish8.6 + install_name_tool -change /Library/Frameworks/Tk.framework/Versions/8.6/Tk @executable_path/../build/tk/Tk.framework/Tk bin/wish8.6 + +tk$(TCLVER)/macosx/Makefile : + @echo "" + @echo "*** Configure tk$(TCLVER) ***" + cd tk$(TCLVER)/macosx; \ + ./configure \ + $(WITHTCL) \ + --enable-64bit \ + --enable-symbols \ + --config-cache --cache-file=../config.cache + +tkmacosx: tkmacosx/Makefile + @echo "" + @echo "*** Installing tkmacosx ***" + $(MAKE) -C tkmacosx -j $(JOBS) install + +tkmacosx/Makefile : + @echo "" + @echo "*** Configure tkmacosx ***" + cd tkmacosx; \ + ./configure \ + $(WITHTK) \ + --prefix $(ROOT) --exec-prefix $(ROOT) \ + --disable-shared --enable-symbols \ + --config-cache --cache-file=../config.cache + +#--------------------------clean + +.PHONY : tkmacosxclean + +tkmacosxclean : + $(MAKE) -C tkmacosx clean + +#--------------------------distclean + +.PHONY : tkmacosxdistclean + +tkmacosxdistclean : + $(MAKE) -C tkmacosx distclean + +#--------------------------distribution + +.PHONY : dist + +dist : + rm -rf dist/$(DS9APP) + rm -rf dist/$(DS9APP).dmg + mkdir dist/$(DS9APP) + ln -s /Applications dist/$(DS9APP)/. + cp -r ds9/macosx/README dist/$(DS9APP)/. + cp -rp bin/SAOImage\ DS9.app dist/$(DS9APP)/. + hdiutil create -srcfolder dist/$(DS9APP) dist/$(DS9APP) + rm -rf dist/$(DS9APP) diff --git a/macosx/aclocal.m4 b/macosx/aclocal.m4 new file mode 100755 index 0000000..2269b61 --- /dev/null +++ b/macosx/aclocal.m4 @@ -0,0 +1,23 @@ +# +# Include the TEA standard macro set +# + +builtin(include,tclconfig/tcl.m4) + +# +# Add here whatever m4 macros you want to define for your package +# + +AC_DEFUN(SAO_CONFIG_DIR, [ + sao_config_dir="$1" + sao_config_arguments="$2" + + sao_popdir=`pwd` + cd $sao_config_dir + + echo "" + echo "*** Configure $1 ***" + echo "running ${CONFIG_SHELL-/bin/sh} ./configure $sao_sub_configure_args $sao_config_arguments" + ${CONFIG_SHELL-/bin/sh} ./configure $sao_sub_configure_args $sao_config_arguments + cd $sao_popdir +]) diff --git a/macosx/configure b/macosx/configure new file mode 100755 index 0000000..a24bf9d --- /dev/null +++ b/macosx/configure @@ -0,0 +1,3025 @@ +#! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.69 for saods9 7.5. +# +# +# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +# +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +# Use a proper internal environment variable to ensure we don't fall + # into an infinite loop, continuously re-executing ourselves. + if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then + _as_can_reexec=no; export _as_can_reexec; + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +as_fn_exit 255 + fi + # We don't want this to propagate to other subprocesses. + { _as_can_reexec=; unset _as_can_reexec;} +if test "x$CONFIG_SHELL" = x; then + as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi +" + as_required="as_fn_return () { (exit \$1); } +as_fn_success () { as_fn_return 0; } +as_fn_failure () { as_fn_return 1; } +as_fn_ret_success () { return 0; } +as_fn_ret_failure () { return 1; } + +exitcode=0 +as_fn_success || { exitcode=1; echo as_fn_success failed.; } +as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } +as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } +as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } +if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : + +else + exitcode=1; echo positional parameters were not saved. +fi +test x\$exitcode = x0 || exit 1 +test -x / || exit 1" + as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO + as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO + eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && + test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1" + if (eval "$as_required") 2>/dev/null; then : + as_have_required=yes +else + as_have_required=no +fi + if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : + +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_found=false +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + as_found=: + case $as_dir in #( + /*) + for as_base in sh bash ksh sh5; do + # Try only shells that exist, to save several forks. + as_shell=$as_dir/$as_base + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : + CONFIG_SHELL=$as_shell as_have_required=yes + if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : + break 2 +fi +fi + done;; + esac + as_found=false +done +$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : + CONFIG_SHELL=$SHELL as_have_required=yes +fi; } +IFS=$as_save_IFS + + + if test "x$CONFIG_SHELL" != x; then : + export CONFIG_SHELL + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +exit 255 +fi + + if test x$as_have_required = xno; then : + $as_echo "$0: This script requires a shell more modern than all" + $as_echo "$0: the shells that I found on your system." + if test x${ZSH_VERSION+set} = xset ; then + $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" + $as_echo "$0: be upgraded to zsh 4.3.4 or later." + else + $as_echo "$0: Please tell bug-autoconf@gnu.org about your system, +$0: including any error possibly output before this +$0: message. Then install a modern shell, or manually run +$0: the script under such a shell if you do have one." + fi + exit 1 +fi +fi +fi +SHELL=${CONFIG_SHELL-/bin/sh} +export SHELL +# Unset more variables known to interfere with behavior of common tools. +CLICOLOR_FORCE= GREP_OPTIONS= +unset CLICOLOR_FORCE GREP_OPTIONS + +## --------------------- ## +## M4sh Shell Functions. ## +## --------------------- ## +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + + + as_lineno_1=$LINENO as_lineno_1a=$LINENO + as_lineno_2=$LINENO as_lineno_2a=$LINENO + eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && + test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { + # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } + + # If we had to re-execute with $CONFIG_SHELL, we're ensured to have + # already done that, so ensure we don't try to do so again and fall + # in an infinite loop. This has already happened in practice. + _as_can_reexec=no; export _as_can_reexec + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +test -n "$DJDIR" || exec 7<&0 &1 + +# Name of the host. +# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_clean_files= +ac_config_libobj_dir=. +LIBOBJS= +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= + +# Identity of this package. +PACKAGE_NAME='saods9' +PACKAGE_TARNAME='saods9' +PACKAGE_VERSION='7.5' +PACKAGE_STRING='saods9 7.5' +PACKAGE_BUGREPORT='' +PACKAGE_URL='' + +ac_subst_vars='LTLIBOBJS +LIBOBJS +CORES +ROOT +ARCH +OS +PKG_CFLAGS +PKG_LIBS +PKG_INCLUDES +PKG_HEADERS +PKG_TCL_SOURCES +PKG_STUB_OBJECTS +PKG_STUB_SOURCES +PKG_STUB_LIB_FILE +PKG_LIB_FILE +EXEEXT +CYGPATH +target_alias +host_alias +build_alias +LIBS +ECHO_T +ECHO_N +ECHO_C +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_URL +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL' +ac_subst_files='' +ac_user_opts=' +enable_option_checking +with_arch +' + ac_precious_vars='build_alias +host_alias +target_alias' + + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +ac_unrecognized_opts= +ac_unrecognized_sep= +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datarootdir='${prefix}/share' +datadir='${datarootdir}' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +includedir='${prefix}/include' +oldincludedir='/usr/include' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' + +ac_prev= +ac_dashdash= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval $ac_prev=\$ac_option + ac_prev= + continue + fi + + case $ac_option in + *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *=) ac_optarg= ;; + *) ac_optarg=yes ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=\$ac_optarg ;; + + -without-* | --without-*) + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=no ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) as_fn_error $? "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information" + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + case $ac_envvar in #( + '' | [0-9]* | *[!_$as_cr_alnum]* ) + as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; + esac + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + as_fn_error $? "missing argument to $ac_option" +fi + +if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; + fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac +fi + +# Check all directory arguments for consistency. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir +do + eval ac_val=\$$ac_var + # Remove trailing slashes. + case $ac_val in + */ ) + ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` + eval $ac_var=\$ac_val;; + esac + # Be sure to have absolute directory names. + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac + as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + as_fn_error $? "working directory cannot be determined" +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + as_fn_error $? "pwd does not report name of working directory" + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$as_myself" || +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_myself" : 'X\(//\)[^/]' \| \ + X"$as_myself" : 'X\(//\)$' \| \ + X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_myself" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures saods9 7.5 to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking ...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root [DATAROOTDIR/doc/saods9] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] +_ACEOF + + cat <<\_ACEOF +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of saods9 7.5:";; + esac + cat <<\_ACEOF + +Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-arch build name + +Report bugs to the package provider. +_ACEOF +ac_status=$? +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +fi + +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +saods9 configure 7.5 +generated by GNU Autoconf 2.69 + +Copyright (C) 2012 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit +fi + +## ------------------------ ## +## Autoconf initialization. ## +## ------------------------ ## +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by saods9 $as_me 7.5, which was +generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + $as_echo "PATH: $as_dir" + done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; + 2) + as_fn_append ac_configure_args1 " '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + as_fn_append ac_configure_args " '$ac_arg'" + ;; + esac + done +done +{ ac_configure_args0=; unset ac_configure_args0;} +{ ac_configure_args1=; unset ac_configure_args1;} + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + $as_echo "## ---------------- ## +## Cache variables. ## +## ---------------- ##" + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + (set) 2>&1 | + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + sed -n \ + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( + *) + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) + echo + + $as_echo "## ----------------- ## +## Output variables. ## +## ----------------- ##" + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + $as_echo "## ------------------- ## +## File substitutions. ## +## ------------------- ##" + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi + + if test -s confdefs.h; then + $as_echo "## ----------- ## +## confdefs.h. ## +## ----------- ##" + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + $as_echo "$as_me: caught signal $ac_signal" + $as_echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -f -r conftest* confdefs.h + +$as_echo "/* confdefs.h */" > confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_URL "$PACKAGE_URL" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer an explicitly selected file to automatically selected ones. +ac_site_file1=NONE +ac_site_file2=NONE +if test -n "$CONFIG_SITE"; then + # We do not want a PATH search for config.site. + case $CONFIG_SITE in #(( + -*) ac_site_file1=./$CONFIG_SITE;; + */*) ac_site_file1=$CONFIG_SITE;; + *) ac_site_file1=./$CONFIG_SITE;; + esac +elif test "x$prefix" != xNONE; then + ac_site_file1=$prefix/share/config.site + ac_site_file2=$prefix/etc/config.site +else + ac_site_file1=$ac_default_prefix/share/config.site + ac_site_file2=$ac_default_prefix/etc/config.site +fi +for ac_site_file in "$ac_site_file1" "$ac_site_file2" +do + test "x$ac_site_file" = xNONE && continue + if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 +$as_echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" \ + || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "failed to load site script $ac_site_file +See \`config.log' for more details" "$LINENO" 5; } + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special files + # actually), so we avoid doing that. DJGPP emulates it as a regular file. + if test /dev/null != "$cache_file" && test -f "$cache_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 +$as_echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi +else + { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 +$as_echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 +$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 +$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 +$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) as_fn_append ac_configure_args " '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 +$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} + as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 +fi +## -------------------- ## +## Main body of script. ## +## -------------------- ## + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + +#-------------------------------------------------------------------- +# Call TEA_INIT as the first TEA_ macro to set up initial vars. +# This will define a ${TEA_PLATFORM} variable == "unix" or "windows" +# as well as PKG_LIB_FILE and PKG_STUB_LIB_FILE. +#-------------------------------------------------------------------- + + + # TEA extensions pass this us the version of TEA they think they + # are compatible with. + TEA_VERSION="3.9" + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for correct TEA configuration" >&5 +$as_echo_n "checking for correct TEA configuration... " >&6; } + if test x"${PACKAGE_NAME}" = x ; then + as_fn_error $? " +The PACKAGE_NAME variable must be defined by your TEA configure.in" "$LINENO" 5 + fi + if test x"3.9" = x ; then + as_fn_error $? " +TEA version not specified." "$LINENO" 5 + elif test "3.9" != "${TEA_VERSION}" ; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: warning: requested TEA version \"3.9\", have \"${TEA_VERSION}\"" >&5 +$as_echo "warning: requested TEA version \"3.9\", have \"${TEA_VERSION}\"" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok (TEA ${TEA_VERSION})" >&5 +$as_echo "ok (TEA ${TEA_VERSION})" >&6; } + fi + + # If the user did not set CFLAGS, set it now to keep macros + # like AC_PROG_CC and AC_TRY_COMPILE from adding "-g -O2". + if test "${CFLAGS+set}" != "set" ; then + CFLAGS="" + fi + + case "`uname -s`" in + *win32*|*WIN32*|*MINGW32_*) + # Extract the first word of "cygpath", so it can be a program name with args. +set dummy cygpath; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CYGPATH+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CYGPATH"; then + ac_cv_prog_CYGPATH="$CYGPATH" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CYGPATH="cygpath -w" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + test -z "$ac_cv_prog_CYGPATH" && ac_cv_prog_CYGPATH="echo" +fi +fi +CYGPATH=$ac_cv_prog_CYGPATH +if test -n "$CYGPATH"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CYGPATH" >&5 +$as_echo "$CYGPATH" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + EXEEXT=".exe" + TEA_PLATFORM="windows" + ;; + *CYGWIN_*) + CYGPATH=echo + EXEEXT=".exe" + # TEA_PLATFORM is determined later in LOAD_TCLCONFIG + ;; + *) + CYGPATH=echo + # Maybe we are cross-compiling.... + case ${host_alias} in + *mingw32*) + EXEEXT=".exe" + TEA_PLATFORM="windows" + ;; + *) + EXEEXT="" + TEA_PLATFORM="unix" + ;; + esac + ;; + esac + + # Check if exec_prefix is set. If not use fall back to prefix. + # Note when adjusted, so that TEA_PREFIX can correct for this. + # This is needed for recursive configures, since autoconf propagates + # $prefix, but not $exec_prefix (doh!). + if test x$exec_prefix = xNONE ; then + exec_prefix_default=yes + exec_prefix=$prefix + fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: configuring ${PACKAGE_NAME} ${PACKAGE_VERSION}" >&5 +$as_echo "$as_me: configuring ${PACKAGE_NAME} ${PACKAGE_VERSION}" >&6;} + + + + + # This package name must be replaced statically for AC_SUBST to work + + # Substitute STUB_LIB_FILE in case package creates a stub library too. + + + # We AC_SUBST these here to ensure they are subst'ed, + # in case the user doesn't call TEA_ADD_... + + + + + + + + + +ac_aux_dir= +for ac_dir in tclconfig "$srcdir"/tclconfig; do + if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + as_fn_error $? "cannot find install-sh, install.sh, or shtool in tclconfig \"$srcdir\"/tclconfig" "$LINENO" 5 +fi + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + + + +#-------------------------------------------------------------------- + + +# Check whether --with-arch was given. +if test "${with_arch+set}" = set; then : + withval=$with_arch; +else + with_arch=unknown +fi + + +OS="macosx" + + +ARCH=$with_arch + + +ROOT=$ac_pwd + + +CORES=`sysctl -n "hw.ncpu"` + + +ac_config_files="$ac_config_files Makefile" + +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, we kill variables containing newlines. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes: double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \. + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) | + sed ' + /^ac_cv_env_/b end + t clear + :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + if test "x$cache_file" != "x/dev/null"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 +$as_echo "$as_me: updating cache $cache_file" >&6;} + if test ! -f "$cache_file" || test -h "$cache_file"; then + cat confcache >"$cache_file" + else + case $cache_file in #( + */* | ?:*) + mv -f confcache "$cache_file"$$ && + mv -f "$cache_file"$$ "$cache_file" ;; #( + *) + mv -f confcache "$cache_file" ;; + esac + fi + fi + else + { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 +$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +# Transform confdefs.h into DEFS. +# Protect against shell expansion while executing Makefile rules. +# Protect against Makefile macro expansion. +# +# If the first sed substitution is executed (which looks for macros that +# take arguments), then branch to the quote section. Otherwise, +# look for a macro that doesn't take arguments. +ac_script=' +:mline +/\\$/{ + N + s,\\\n,, + b mline +} +t clear +:clear +s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g +t quote +s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g +t quote +b any +:quote +s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g +s/\[/\\&/g +s/\]/\\&/g +s/\$/$$/g +H +:any +${ + g + s/^\n// + s/\n/ /g + p +} +' +DEFS=`sed -n "$ac_script" confdefs.h` + + +ac_libobjs= +ac_ltlibobjs= +U= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`$as_echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" + as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + + +: "${CONFIG_STATUS=./config.status}" +ac_write_fail=0 +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +as_write_fail=0 +cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false + +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +exec 6>&1 +## ----------------------------------- ## +## Main body of $CONFIG_STATUS script. ## +## ----------------------------------- ## +_ASEOF +test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# Save the log message, to keep $0 and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by saods9 $as_me 7.5, which was +generated by GNU Autoconf 2.69. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + +_ACEOF + +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac + + + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# Files that config.status was made for. +config_files="$ac_config_files" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +ac_cs_usage="\ +\`$as_me' instantiates files and other configuration actions +from templates according to the current configuration. Unless the files +and actions are specified as TAGs, all are instantiated by default. + +Usage: $0 [OPTION]... [TAG]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + --config print configuration, then exit + -q, --quiet, --silent + do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + +Configuration files: +$config_files + +Report bugs to the package provider." + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" +ac_cs_version="\\ +saods9 config.status 7.5 +configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" + +Copyright (C) 2012 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +test -n "\$AWK" || AWK=awk +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# The default lists apply if the user does not specify any file. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=?*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + --*=) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg= + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac + + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + $as_echo "$ac_cs_version"; exit ;; + --config | --confi | --conf | --con | --co | --c ) + $as_echo "$ac_cs_config"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + '') as_fn_error $? "missing file argument" ;; + esac + as_fn_append CONFIG_FILES " '$ac_optarg'" + ac_need_defaults=false;; + --he | --h | --help | --hel | -h ) + $as_echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) as_fn_error $? "unrecognized option: \`$1' +Try \`$0 --help' for more information." ;; + + *) as_fn_append ac_config_targets " $1" + ac_need_defaults=false ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +if \$ac_cs_recheck; then + set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + shift + \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 + CONFIG_SHELL='$SHELL' + export CONFIG_SHELL + exec "\$@" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + $as_echo "$ac_log" +} >&5 + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + + *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; + esac +done + + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. +$debug || +{ + tmp= ac_tmp= + trap 'exit_status=$? + : "${ac_tmp:=$tmp}" + { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status +' 0 + trap 'as_fn_exit 1' 1 2 13 15 +} +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 +ac_tmp=$tmp + +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. +if test -n "$CONFIG_FILES"; then + + +ac_cr=`echo X | tr X '\015'` +# On cygwin, bash can eat \r inside `` if the user requested igncr. +# But we know of no other shell where ac_cr would be empty at this +# point, so we can use a bashism as a fallback. +if test "x$ac_cr" = x; then + eval ac_cr=\$\'\\r\' +fi +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' +else + ac_cs_awk_cr=$ac_cr +fi + +echo 'BEGIN {' >"$ac_tmp/subs1.awk" && +_ACEOF + + +{ + echo "cat >conf$$subs.awk <<_ACEOF" && + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" +} >conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 +ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + . ./conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done +rm -f conf$$subs.sh + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && +_ACEOF +sed -n ' +h +s/^/S["/; s/!.*/"]=/ +p +g +s/^[^!]*!// +:repl +t repl +s/'"$ac_delim"'$// +t delim +:nl +h +s/\(.\{148\}\)..*/\1/ +t more1 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +p +n +b repl +:more1 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t nl +:delim +h +s/\(.\{148\}\)..*/\1/ +t more2 +s/["\\]/\\&/g; s/^/"/; s/$/"/ +p +b +:more2 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t delim +' >$CONFIG_STATUS || ac_write_fail=1 +rm -f conf$$subs.awk +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACAWK +cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" + +} +{ + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } + + print line +} + +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +else + cat +fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ + || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 +_ACEOF + +# VPATH may cause trouble with some makes, so we remove sole $(srcdir), +# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ +h +s/// +s/^/:/ +s/[ ]*$/:/ +s/:\$(srcdir):/:/g +s/:\${srcdir}:/:/g +s/:@srcdir@:/:/g +s/^:*// +s/:*$// +x +s/\(=[ ]*\).*/\1/ +G +s/\n// +s/^[^=]*=[ ]*$// +}' +fi + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +fi # test -n "$CONFIG_FILES" + + +eval set X " :F $CONFIG_FILES " +shift +for ac_tag +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$ac_tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + as_fn_append ac_file_inputs " '$ac_f'" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} + fi + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac + + case $ac_tag in + *:-:* | *:-) cat >"$ac_tmp/stdin" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; + esac + ;; + esac + + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir="$ac_dir"; as_fn_mkdir_p + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + + case $ac_mode in + :F) + # + # CONFIG_FILE + # + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= +ac_sed_dataroot=' +/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac +_ACEOF + +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_sed_extra="$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s|@configure_input@|$ac_sed_conf_input|;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +$ac_datarootdir_hack +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ + >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ + "$ac_tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&5 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&2;} + + rm -f "$ac_tmp/stdin" + case $ac_file in + -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; + *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; + esac \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + ;; + + + + esac + +done # for ac_tag + + +as_fn_exit 0 +_ACEOF +ac_clean_files=$ac_clean_files_save + +test $ac_write_fail = 0 || + as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || as_fn_exit 1 +fi +if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 +$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} +fi + + diff --git a/macosx/configure.in b/macosx/configure.in new file mode 100755 index 0000000..44cb127 --- /dev/null +++ b/macosx/configure.in @@ -0,0 +1,51 @@ +#!/bin/bash -norc +dnl This file is an input file used by the GNU "autoconf" program to +dnl generate the file "configure", which is run during Tcl installation +dnl to configure the system for the local environment. + +#----------------------------------------------------------------------- +# Sample configure.in for Tcl Extensions. The only places you should +# need to modify this file are marked by the string __CHANGE__ +#----------------------------------------------------------------------- + +#----------------------------------------------------------------------- +# __CHANGE__ +# Set your package name and version numbers here. +# +# This initializes the environment with PACKAGE_NAME and PACKAGE_VERSION +# set as provided. These will also be added as -D defs in your Makefile +# so you can encode the package version directly into the source files. +# This will also define a special symbol for Windows (BUILD_ +# so that we create the export library with the dll. +#----------------------------------------------------------------------- + +AC_INIT([saods9], [7.5]) + +#-------------------------------------------------------------------- +# Call TEA_INIT as the first TEA_ macro to set up initial vars. +# This will define a ${TEA_PLATFORM} variable == "unix" or "windows" +# as well as PKG_LIB_FILE and PKG_STUB_LIB_FILE. +#-------------------------------------------------------------------- + +TEA_INIT([3.9]) + +AC_CONFIG_AUX_DIR(tclconfig) + +#-------------------------------------------------------------------- + +AC_ARG_WITH([arch],AC_HELP_STRING([--with-arch],[build name]),[],[with_arch=unknown]) + +OS="macosx" +AC_SUBST(OS) + +ARCH=$with_arch +AC_SUBST(ARCH) + +ROOT=$ac_pwd +AC_SUBST(ROOT) + +CORES=`sysctl -n "hw.ncpu"` +AC_SUBST(CORES) + +AC_OUTPUT([Makefile]) + diff --git a/macosx/tclconfig/CVS/Entries b/macosx/tclconfig/CVS/Entries new file mode 100644 index 0000000..929e41f --- /dev/null +++ b/macosx/tclconfig/CVS/Entries @@ -0,0 +1,5 @@ +/ChangeLog/1.1/Tue Aug 11 17:16:34 2015// +/README.txt/1.1/Tue Aug 11 17:16:34 2015// +/install-sh/1.1/Tue Aug 11 17:16:34 2015// +/tcl.m4/1.1/Tue Aug 11 17:16:34 2015// +D diff --git a/macosx/tclconfig/CVS/Repository b/macosx/tclconfig/CVS/Repository new file mode 100644 index 0000000..b599fbf --- /dev/null +++ b/macosx/tclconfig/CVS/Repository @@ -0,0 +1 @@ +saods9/macosx/tclconfig diff --git a/macosx/tclconfig/CVS/Root b/macosx/tclconfig/CVS/Root new file mode 100644 index 0000000..fea38f8 --- /dev/null +++ b/macosx/tclconfig/CVS/Root @@ -0,0 +1 @@ +:ext:joye@bokhara:/proj/rd/cvsroot diff --git a/macosx/tclconfig/ChangeLog b/macosx/tclconfig/ChangeLog new file mode 100644 index 0000000..ffda2bb --- /dev/null +++ b/macosx/tclconfig/ChangeLog @@ -0,0 +1,980 @@ +2013-07-04 Jan Nijtmans + + * unix/tcl.m4: Bug [3324676]: AC_PROG_INSTALL incompat, + Bug [3606445]: Unneeded -DHAVE_NO_SEH=1 when not building on Windows + +2013-07-02 Jan Nijtmans + + * unix/tcl.m4: Bug [32afa6e256]: dirent64 check is incorrect in tcl.m4 + (thanks to Brian Griffin) + +2013-06-20 Jan Nijtmans + + * unix/tcl.m4: Use X11/Xlib.h for checking where X11 can be found + in stead of X11/XIntrinsic.h. Suggested by Pietro Cerutti. + +2013-06-04 Jan Nijtmans + + * unix/tcl.m4: Eliminate NO_VIZ macro as current + zlib uses HAVE_HIDDEN in stead. One more last-moment + fix for FreeBSD by Pietro Cerutti + +2013-05-19 Jan Nijtmans + + * unix/tcl.m4: Fix for FreeBSD, and remove support for old + FreeBSD versions. Patch by Pietro Cerutti + +2013-03-12 Jan Nijtmans + + * unix/tcl.m4: Patch by Andrew Shadura, providing better support for + * three architectures they have in Debian. + +2012-08-07 Stuart Cassoff + + * tcl.m4: Added "-DNDEBUG" to CFLAGS_DEFAULT + when building with --disable-symbols. + +2012-08-07 Stuart Cassoff + + * tcl.m4: [Bug 3555058]: Checkin [30736d63f0] broke + CFLAGS_DEFAULT, LDFLAGS_DEFAULT + +2012-08-07 Stuart Cassoff + + * tcl.m4: [Bug 3511806]: Checkin [30736d63f0] broke CFLAGS + +2012-08-07 Jan Nijtmans + + * tcl.m4: [Bug 3511806]: Checkin [30736d63f0] broke CFLAGS + +2012-07-25 Jan Nijtmans + + * tcl.m4: My previous commit (2012-04-03) broke the ActiveTcl + build for AMD64, because of the quotes in "C://AMD64/cl.exe". + It turns out that the AC_TRY_COMPILE macro cannot handle that. + +2012-07-22 Stuart Cassoff + + * tcl.m4: Tidy: consistency, spelling, phrasing, whitespace. + No functional change. + +2012-04-03 Jan Nijtmans + + * tcl.m4: [Bug 3511806] Compiler checks too early + This change allows to build the cygwin and mingw32 ports of + Tcl/Tk extensions to build out-of-the-box using a native or + cross-compiler, e.g. on Cygwin, Linux or Darwin. + +2011-04-02 Jan Nijtmans + + * install-sh: Fix issue with library stripping in install-sh + (backported from kevin_walzer's patch from Tcl 8.6 trunk) + +2011-04-05 Andreas Kupries + + * tcl.m4: Applied patch by Jeff Lawson. Nicer error message when + tclConfig.sh was not found. + +2010-12-15 Stuart Cassoff + + * install-sh: Upgrade to newer install-sh and use it. + * tcl.m4: + +2010-12-14 Stuart Cassoff + + * tcl.m4: Better building on OpenBSD. + +2010-12-14 Jan Nijtmans + + * tcl.m4: when using gcc, don't try to determine Win64 SDK + +2010-12-12 Jan Nijtmans + + * tcl.m4: Determine correctly a cross-compiler-windres + +2010-11-23 Jan Nijtmans + + * tcl.m4: add some cross-compile support, borrowed from Tcl 8.6 + +2010-09-16 Jeff Hobbs + + * tcl.m4: correct HP-UX LDFLAGS (only used when building big shell) + +2010-09-14 Jeff Hobbs + + * tcl.m4: add extra if check for .manifest file generation + Add notice about package name and version being built. + +2010-09-09 Jan Nijtmans + + * tcl.m4: [FREQ #3058486] TEA_LOAD_CONFIG doesn't set all BUILD_ vars + Slightly related: defining BUILD_$1 on all platforms - not only win - + allows the -fvisibility feature to be used in extensions as well, at + least if you compile against tcl >= 8.5. + +2010-08-26 Jeff Hobbs + + * tcl.m4: ensure safe quoting for autoheader usage + +2010-08-19 Jeff Hobbs + + * tcl.m4: add TEA_ADD_CLEANFILES macro to make adding cleanfiles + easier, and add *.exp to CLEANFILES Windows default. + (TEA_MAKE_LIB): Enhanced to check for MSVC that requires manifests + and auto-embed it into proj DLL via MAKE_SHARED_LIB. Also define + VC_MANIFEST_EMBED_DLL and VC_MANIFEST_EMBED_EXE that do the same + magic in case it is needed for extended TEA projects. + +2010-08-16 Jeff Hobbs + + *** Bump to TEA_VERSION 3.9 *** + If upgrading from TEA_VERSION 3.8, copy over tcl.m4, change + TEA_INIT to use 3.9 and reconfigure (ac-2.59+). + BUILD_${PACKAGE_NAME} will be auto-defined on Windows for + correct setting of TCL_STORAGE_CLASS. + TEA_LOAD_CONFIG users should remove the SHLIB_LD_LIBS setting done + in configure.in (LIBS will be automagically populated by + TEA_LOAD_CONFIG). + TEA_EXPORT_CONFIG has been added for ${pkg}Config.sh creators + SHLIB_LD_FLAGS was deprecated a while ago, remove it if it is + still in your Makefile.in. + + * tcl.m4: add /usr/lib64 to set of auto-search dirs. [Bug 1230554] + Auto-define BUILD_$PACKAGE_NAME so users don't need to. This + needs to correspond with $pkg.h define magic for TCL_STORAGE_CLASS. + Auto-define CLEANFILES. Users can expand it. + (SHLIB_LD_LIBS): define to '${LIBS}' default and change it only if + necessary. Platforms not using this may simply not work or have + very funky linkers. + (TEA_LOAD_CONFIG): When loading config for another extension, + auto-add stub libraries found with TEA_ADD_LIBS. Eases + configure.in for modules like itk and img::*. + (TEA_EXPORT_CONFIG): Add standardized function for exporting a + ${pkg}Config.sh. See use by img::* and itcl. + +2010-08-12 Jeff Hobbs + + *** Bump to TEA_VERSION 3.8 *** + If upgrading from TEA_VERSION 3.7, copy over tcl.m4, change + TEA_INIT to use 3.8 and reconfigure (ac-2.59+). + No other changes should be necessary. + + * tcl.m4: remove more vestigial bits from removed platforms. + Add back SCO_SV-3.2*. + Remove use of DL_LIBS and DL_OBJS and related baggage - these are + only needed by the core to support 'load'. + Allow for macosx in TEA_ADD_SOURCES. + Correct check for found_xincludes=no in TEA_PATH_UNIX_X. + +2010-08-11 Jeff Hobbs + + * tcl.m4: remove the following old platform configurations: + UNIX_SV*|UnixWare-5*, SunOS-4.*, SINIX*5.4*, SCO_SV-3.2*, + OSF1-1.*, NEXTSTEP-*, NetBSD-1.*|FreeBSD-[[1-2]].*, MP-RAS-*, + IRIX-5.*, HP-UX-*.08.*|HP-UX-*.09.*|HP-UX-*.10.*, dgux*, + BSD/OS-2.1*|BSD/OS-3* + (AIX): drop AIX-pre4 support and use of ldAix, use -bexpall/-brtl + +2010-07-05 Jan Nijtmans + + * tcl.m4: [Patch #1055668] removal of exported internals from + tclInt.h (EXTERN macro) + +2010-04-14 Jan Nijtmans + + * tcl.m4 - Backport a lot of quoting fixes from tcl8.6/unix/tcl.m4 + - Fix determination of CYGPATH for CYGWIN + With those fixes, itcl and tdbc compile fine with CYGWIN + +2010-04-06 Jan Nijtmans + + * install-sh [Bug 2982540] configure and install* script files + should always have LF + +2010-02-19 Stuart Cassoff + + * tcl.m4: Correct compiler/linker flags for threaded builds on + OpenBSD. + +2010-01-19 Jan Nijtmans + + * tcl.m4: Detect CYGWIN variant: win32 or unix + +2010-01-03 Donal K. Fellows + + * unix/tcl.m4 (TEA_CONFIG_CFLAGS): [Tcl Bug 1636685]: Use the + configuration for modern FreeBSD suggested by the FreeBSD porter. + +2009-10-22 Jan Nijtmans + + * tcl.m4: [Tcl Patch #2883533] tcl.m4 support for Haiku OS + +2009-04-27 Jeff Hobbs + + * tcl.m4 (TEA_CONFIG_CFLAGS): harden the check to add _r to CC on + AIX with threads. + +2009-04-10 Daniel Steffen + + * tcl.m4 (Darwin): check for 64-bit TkAqua. + +2009-03-26 Jan Nijtmans + + * tclconfig/tcl.m4: Adapt LDFLAGS and LD_SEARCH_FLAGS + together with SHLIB_LD definition to unbreak building on HPUX. + +2009-03-20 Andreas Kupries + + * tclconfig/tcl.m4: Changed SHLIB_LD definition to unbreak + building on HPUX. + +2009-03-16 Joe English + + * tcl.m4(TEA_PUBLIC_TK_HEADERS): Look at ${TK_INCLUDE_SPEC} + (found in tkConfig.sh) when trying to guess where tk.h might be + [Patch 1960628]. + +2009-03-11 Joe English + + * tcl.m4: Allow ${SHLIB_SUFFIX} to be overridden at + configure-time [Patch 1960628]. Also fix some comment typos, + and an uninitialized variable bug-waiting-to-happen. + +2008-12-21 Jan Nijtmans + + * tcl.m4: [Bug 2073255] Tcl_GetString(NULL) doesn't crash on HP-UX + (this bug report was for Tcl, but holds for TEA as well.) + +2008-12-20 Daniel Steffen + + * tcl.m4: sync with tdbc tcl.m4 changes + (SunOS-5.11): Sun cc SHLIB_LD: use LDFLAGS_DEFAULT instead of LDFLAGS + +2008-12-02 Jeff Hobbs + + *** Bump to TEA_VERSION 3.7 *** + + * tcl.m4: in private header check, check for Port.h instead + of Int.h to ensure all private headers are available. + +2008-11-04 Daniel Steffen + + * tcl.m4 (Darwin): sync TEA_PRIVATE_TK_HEADERS handling of + Tk.framework PrivateHeaders with TEA_PRIVATE_TCL_HEADERS. + +2008-11-04 Jeff Hobbs + + * tcl.m4 (TEA_PATH_TCLCONFIG, TEA_PATH_TKCONFIG): exit with error + when tclConfig.sh cannot be found. [Bug #1997760] + (TEA_PRIVATE_TCL_HEADERS, TEA_PRIVATE_TK_HEADERS): allow for + finding the headers installed in the public areas, e.g. a result of + make install-private-headers. [Bug #1631922] + +2008-08-12 Daniel Steffen + + * tcl.m4 (Darwin): link shlib with current and compatiblity version + flags; look for libX11.dylib when searching for X11 libraries. + +2008-06-12 Daniel Steffen + + * tcl.m4 (SunOS-5.11): fix 64bit amd64 support with gcc & Sun cc. + +2008-03-27 Daniel Steffen + + * tcl.m4 (SunOS-5.1x): fix 64bit support for Sun cc. [Bug 1921166] + +2008-02-01 Donal K. Fellows + + * tcl.m4 (TEA_CONFIG_CFLAGS): Updated to work at least in part with + more modern VC versions. Currently just made the linker flags more + flexible; more work may be needed. + +2007-10-26 Daniel Steffen + + * tcl.m4 (Darwin): add support for 64-bit X11. + +2007-10-23 Jeff Hobbs + + *** Tagged tea-3-branch to start TEA 4 development on HEAD *** + +2007-09-17 Joe English + + * tcl.m4: use '${CC} -shared' instead of 'ld -Bshareable' + to build shared libraries on current NetBSDs [Bug 1749251]. + +2007-09-15 Daniel Steffen + + * tcl.m4: replace all direct references to compiler by ${CC} to + enable CC overriding at configure & make time. + (SunOS-5.1x): replace direct use of '/usr/ccs/bin/ld' in SHLIB_LD by + 'cc' compiler driver. + +2007-08-08 Jeff Hobbs + + * tcl.m4: check Ttk dir for Tk private headers (8.5). + Add some comments to other bits. + +2007-06-25 Jeff Hobbs + + * tcl.m4 (TEA_PROG_TCLSH, TEA_PROG_WISH): move where / is added. + +2007-06-13 Jeff Hobbs + + * tcl.m4: fix --with-tkinclude alignment. [Bug 1506111] + +2007-06-06 Daniel Steffen + + * tcl.m4 (Darwin): fix 64bit arch removal in fat 32&64bit builds. + +2007-05-18 Donal K. Fellows + + * tcl.m4: Added quoting so that paths with spaces cause fewer + problems. + +2007-03-07 Daniel Steffen + + * tcl.m4 (Darwin): s/CFLAGS/CPPFLAGS/ in -mmacosx-version-min check. + +2007-02-15 Jeff Hobbs + + * tcl.m4: correct private header check to search in generic subdir + +2007-02-09 Jeff Hobbs + + *** Bump to TEA_VERSION 3.6 *** + + * tcl.m4: correct -d to -f + (TEA_CONFIG_CFLAGS): SHLIB_SUFFIX is .so on HP ia64 [Bug 1615058] + +2007-02-08 Jeff Hobbs + + * tcl.m4 (TEA_PRIVATE_TCL_HEADERS, TEA_PRIVATE_TK_HEADERS): check + that the dirs actually have private headers. [Bug 1631922] + +2007-02-04 Daniel Steffen + + * tcl.m4: add caching to -pipe check. + +2007-01-25 Daniel Steffen + + * tcl.m4: integrate CPPFLAGS into CFLAGS as late as possible and + move (rather than duplicate) -isysroot flags from CFLAGS to CPPFLAGS to + avoid errors about multiple -isysroot flags from some older gcc builds. + +2006-01-19 Daniel Steffen + + * tcl.m4: ensure CPPFLAGS env var is used when set. [Bug 1586861] + (Darwin): add -isysroot and -mmacosx-version-min flags to CPPFLAGS when + present in CFLAGS to avoid discrepancies between what headers configure + sees during preprocessing tests and compiling tests. + +2006-12-19 Daniel Steffen + + * tcl.m4 (Darwin): --enable-64bit: verify linking with 64bit -arch flag + succeeds before enabling 64bit build. + +2006-12-16 Daniel Steffen + + * tcl.m4 (Linux): fix previous change to use makefile variable + LDFLAGS_DEFAULT instead of LDFLAGS in SHLIB_LD, to ensure linker + flags in sampleextension Makefile are picked up. + +2006-11-26 Daniel Steffen + + * tcl.m4 (Linux): --enable-64bit support. [Patch 1597389], [Bug 1230558] + +2006-08-18 Daniel Steffen + + * tcl.m4 (Darwin): add support for --enable-64bit on x86_64, for + universal builds including x86_64 and for use of -mmacosx-version-min + instead of MACOSX_DEPLOYMENT_TARGET. For Tk extensions, remove 64-bit + arch flags from CFLAGS like in the Tk configure, as neither TkAqua nor + TkX11 can be built for 64-bit at present. + +2006-03-28 Jeff Hobbs + + * tcl.m4: []-quote AC_DEFUN functions. + (TEA_PATH_TKCONFIG): Fixed Windows-specific check for tkConfig.sh. + (TEA_MAKE_LIB): Prepend 'lib' for Windows-gcc configs. + +2006-03-07 Joe English + + * tcl.m4: Set SHLIB_LD_FLAGS='${LIBS}' on NetBSD, + as per the other *BSD variants [Bug 1334613]. + +2006-01-25 Jeff Hobbs + + *** Bump to TEA version 3.5 *** + + * tcl.m4: keep LD_SEARCH_FLAGS and CC_SEARCH_FLAGS synchronous + with core tcl.m4 meaning. + +2006-01-24 Daniel Steffen + + * tcl.m4 (Darwin): use makefile variable LDFLAGS_DEFAULT instead of + LDFLAGS in SHLIB_LD, to ensure linker flags in sampleextension Makefile + are picked up. [Bug 1403343] + +2006-01-23 Jeff Hobbs + + * tcl.m4: add C:/Tcl/lib and C:/Progra~1/Tcl/lib dirs to check for + *Config.sh on Windows. [Bug 1407544] + +2006-01-23 Daniel Steffen + + * tcl.m4 (Darwin): for Tk extensions, remove -arch ppc64 from CFLAGS + like in the Tk configure, as neither TkAqua nor TkX11 can be built for + 64bit at present (no 64bit GUI libraries). + +2006-01-22 Jeff Hobbs + + * tcl.m4: restore system=windows on Windows. + Remove error if 'ar' isn't found (it may not be on Windows). + Do not add -lxnet or define _XOPEN_SOURCE on HP-UX by default. + Ensure the C|LDFLAGS_DEFAULT gets the fully sub'd value at + configure time. + +2006-01-10 Daniel Steffen + + * tcl.m4: add caching, use AC_CACHE_CHECK instead of AC_CACHE_VAL + where possible, consistent message quoting, sync relevant + tcl/unix/tcl.m4 HEAD changes and gratuitous formatting differences + (notably sunc removal of support for for ancient BSD's, IRIX 4, + RISCos and Ultrix by kennykb), Darwin improvements to + TEA_LOAD_*CONFIG to make linking work against Tcl/Tk frameworks + installed in arbitrary location, change TEA_PROG_* search order + (look in *_BIN_DIR parents before *_PREFIX). + +2006-01-05 Jeff Hobbs + + * tcl.m4: add dkf's system config refactor + +2006-01-04 Jeff Hobbs + + * tcl.m4: remove extraneous ' that causes bash 3.1 to choke + +2005-12-19 Joe English + + * tcl.m4 (TEA_PATH_TCLCONFIG &c): Look for tclConfig.sh &c + in ${libdir}, where they are installed by default [Patch #1377407]. + +2005-12-05 Don Porter + + * tcl.m4 (TEA_PUBLIC_*_HEADERS): Better support for finding + header files for uninstalled Tcl and Tk. + +2005-12-02 Jeff Hobbs + + * tcl.m4: correctly bump TEA_VERSION var to 3.4 + +2005-12-01 Daniel Steffen + + * unix/tcl.m4 (Darwin): fixed error when MACOSX_DEPLOYMENT_TARGET unset + +2005-11-29 Jeff Hobbs + + * tcl.m4: *** Bump to TEA version 3.4 *** + Add Windows x64 build support. + Remove TEA_PATH_NOSPACE and handle the problem with ""s where + necessary - the macro relied on TCLSH_PROG which didn't work for + cross-compiles. + +2005-11-27 Daniel Steffen + + * tcl.m4 (Darwin): add 64bit support, add CFLAGS to SHLIB_LD to + support passing -isysroot in env(CFLAGS) to configure (flag can't + be present twice, so can't be in both CFLAGS and LDFLAGS during + configure), don't use -prebind when deploying on 10.4. + (TEA_ENABLE_LANGINFO, TEA_TIME_HANDLER): add/fix caching. + +2005-10-30 Daniel Steffen + + * tcl.m4: fixed two tests for TEA_WINDOWINGSYSTEM = "aqua" that + should have been for `uname -s` = "Darwin" instead; added some + missing quoting. + (TEA_PROG_TCLSH, TEA_PROG_WISH): fix incorrect assumption that + install location of tclConfig.sh/tkConfig.sh allows to determine + the tclsh/wish install dir via ../bin. Indeed tcl/tk can be + configured with arbitrary --libdir and --bindir (independent of + prefix) and such a configuration is in fact standard with Darwin + framework builds. At least now also check ${TCL_PREFIX}/bin + resp. ${TK_PREFIX}/bin for presence of tclsh resp. wish (if tcl/tk + have been configured with arbitrary --bindir, this will still not + find them, for a general solution *Config.sh would need to contain + the values of bindir/libdir/includedir passed to configure). + +2005-10-07 Jeff Hobbs + + * tcl.m4: Fix Solaris 5.10 check and Solaris AMD64 64-bit builds. + +2005-10-04 Jeff Hobbs + + * tcl.m4 (TEA_PRIVATE_TCL_HEADERS): add / to finish sed macro + (TEA_ENABLE_THREADS): don't check for pthread_attr_setstacksize func + +2005-09-13 Jeff Hobbs + + * tcl.m4: *** Update to TEA version 3.3 *** + define TEA_WINDOWINGSYSTEM in TEA_LOAD_TKCONFIG. + Make --enable-threads the default (users can --disable-threads). + Improve AIX ${CC}_r fix to better check existing ${CC} value. + Do the appropriate evals to not require the *TOP_DIR_NATIVE vars + be set for extensions that use private headers. + Make aqua check for Xlib compat headers the same as win32. + +2005-07-26 Mo DeJong + + * tcl.m4 (TEA_PROG_TCLSH, TEA_BUILD_TCLSH, + TEA_PROG_WISH, TEA_BUILD_WISH): Remove + TEA_BUILD_TCLSH and TEA_BUILD_WISH because + of complaints that it broke the build when + only an installed version of Tcl was available + at extension build time. The TEA_PROG_TCLSH and + TEA_PROG_WISH macros will no longer search the + path at all. The build tclsh or installed + tclsh shell will now be found by TEA_PROG_TCLSH. + +2005-07-24 Mo DeJong + + * tcl.m4 (TEA_PROG_TCLSH, TEA_BUILD_TCLSH, + TEA_PROG_WISH, TEA_BUILD_WISH): + Split confused search for tclsh on PATH and + build and install locations into two macros. + TEA_PROG_TCLSH and TEA_PROG_WISH search the + system PATH for an installed tclsh or wish. + The TEA_BUILD_TCLSH and TEA_BUILD_WISH + macros determine the name of tclsh or + wish in the Tcl or Tk build directory even + if tclsh or wish has not yet been built. + [Tcl bug 1160114] + [Tcl patch 1244153] + +2005-06-23 Daniel Steffen + + * tcl.m4 (TEA_PRIVATE_TK_HEADERS): add ${TK_SRC_DIR}/macosx to + TK_INCLUDES when building against TkAqua. + + * tcl.m4 (TEA_PATH_X): fixed missing comma in AC_DEFINE + + * tcl.m4: changes to better support framework builds of Tcl and Tk out + of the box: search framework install locations for *Config.sh, and if in + presence of a framework build, use the framework's Headers and + PrivateHeaders directories for public and private includes. [FR 947735] + +2005-06-18 Daniel Steffen + + * tcl.m4 (Darwin): add -headerpad_max_install_names to LDFLAGS to + ensure we can always relocate binaries with install_name_tool. + +2005-06-04 Daniel Steffen + + * tcl.m4 (TEA_PATH_X): for TEA_WINDOWINGSYSTEM == aqua, check if xlib + compat headers are available in tkheaders location, otherwise add xlib + sourcedir to TK_XINCLUDES. + +2005-04-25 Daniel Steffen + + * tcl.m4: added AC_DEFINE* descriptions (from core tcl.m4) to allow + use with autoheader. + (Darwin): added configure checks for recently added linker flags + -single_module and -search_paths_first to allow building with older + tools (and on Mac OS X 10.1), use -single_module in SHLIB_LD. + (TEA_MISSING_POSIX_HEADERS): added caching of dirent.h check. + (TEA_BUGGY_STRTOD): added caching (sync with core tcl.m4). + +2005-03-24 Jeff Hobbs + + * tcl.m4 (TEA_TCL_64BIT_FLAGS): use Tcl header defaults for wide + int type only on Windows when __int64 is detected as valid. + +2005-03-24 Don Porter + + * README.txt: Update reference to "SC_* macros" to "TEA_* macros". + * tcl.m4: Incorporated recent improvements in SC_PATH_TCLCONFIG + and SC_PATH_TKCONFIG into TEA_PATH_TCLCONFIG and TEA_PATH_TKCONFIG. + Corrected search path in TEA_PATH_CONFIG and added + AC_SUBST($1_BIN_DIR) to TEA_LOAD_CONFIG so that packages that load + the configuration of another package can know where they loaded + it from. + +2005-03-18 Jeff Hobbs + + * tcl.m4 (TEA_CONFIG_CFLAGS): correct 2005-03-17 change to have + variant LD_SEARCH_FLAGS for gcc and cc builds. + + * tcl.m4 (TEA_PROG_TCLSH, TEA_PROG_WISH): correct x-compile check. + +2005-03-17 Jeff Hobbs + + * tcl.m4: Correct gcc build and HP-UX-11. + +2005-02-08 Jeff Hobbs + + * tcl.m4 (TEA_ADD_LIBS): don't touch lib args starting with -. + (TEA_CONFIG_CFLAGS): only define _DLL for CE in shared build. + (TEA_MAKE_LIB): set RANLIB* to : on Windows (it's not needed). + +2005-02-01 Jeff Hobbs + + * tcl.m4: redo of 2005-01-27 changes to correctly handle paths + with spaces. Win/CE and Win/64 builds now require a prebuilt + tclsh to handle conversion to short pathnames. This is done in + the new TEA_PATH_NOSPACE macro. For Win/CE|64, make CC just the + compiler and move the necessary includes to CFLAGS. + (TEA_CONFIG_CFLAGS): Add Solaris 64-bit gcc build support. + (TEA_PROG_TCLSH, TEA_PROG_WISH): Allow TCLSH_PROG and WISH_PROG to + be set in the env and prevent resetting. + (TEA_ADD_LIBS): On Windows using GCC (mingw), convert foo.lib + args to -lfoo, for use with mingw. + *** POTENTIAL INCOMPATABILITY *** + (TEA_CONFIG_CFLAGS): Fix AIX gcc builds to work out-of-box. + Bumped TEA to 3.2. + +2005-01-27 Jeff Hobbs + + * tcl.m4: remove cygpath calls to support msys. + Update base CE build assumption to "420,ARMV4,ARM,Pocket PC 2003". + Make STLIB_LD use $LINKBIN -lib. + +2005-01-25 Daniel Steffen + + * tcl.m4 (Darwin): fixed bug with static build linking to dynamic + library in /usr/lib etc instead of linking to static library earlier + in search path. [Tcl Bug 956908] + Removed obsolete references to Rhapsody. + +2004-12-29 Jeff Hobbs + + * tcl.m4: Updates for VC7 compatibility, fixing CFLAGS and LDFLAGS + options, using better default -O levels. [Bug 1092952, 1091967] + +2004-12-29 Joe English + + * tcl.m4: Do not use ${DBGX} suffix when building + shared libraries [patch #1081595, TIP #34] + +2004-09-07 Jeff Hobbs + + * tcl.m4 (TEA_CONFIG_CFLAGS): support eVC4 Win/CE builds + +2004-08-10 Jeff Hobbs + + * tcl.m4 (TEA_INIT, TEA_PREFIX): update handling of exec_prefix to + work around subdir configures since autoconf only propagates the + prefix (not exec_prefix). + +2004-07-23 Daniel Steffen + + * tcl.m4 (TEA_CONFIG_CFLAGS): Darwin section: brought inline with + Tcl 8.5 HEAD config, removed core specific & obsolete settings. + +2004-07-22 Jeff Hobbs + + * tcl.m4 (TEA_PATH_X): check in TK_DEFS for MAC_OSX_TK to see if + we are compiling on Aqua. Add TEA_WINDOWINGSYSTEM var that + reflects 'tk windowingsystem' value. + +2004-07-16 Jeff Hobbs + + * tcl.m4 (TEA_ENABLE_THREADS): force a threaded build when + building against a threaded core. + (CFLAGS_WARNING): Remove -Wconversion for gcc builds + (TEA_CONFIG_CFLAGS): Reorder configure.in for better 64-bit build + configuration, replacing EXTRA_CFLAGS with CFLAGS. [Bug #874058] + Update to latest Tcl 8.5 head config settings. + Call this TEA version 3.1. + +2004-04-29 Jeff Hobbs + + * tcl.m4 (TEA_TCL_64BIT_FLAGS): replace AC_TRY_RUN test with + AC_TRY_COMPILE for the long vs. long long check. (kenny) + +2004-04-26 Jeff Hobbs + + * tcl.m4 (TEA_TCL_64BIT_FLAGS): update against core tcl.m4 to + define TCL_WIDE_INT_IS_LONG if 'using long'. + +2004-03-19 Jeff Hobbs + + * tcl.m4: correct Windows builds getting LDFLAGS info in MAKE_LIB + +2004-02-11 Jeff Hobbs + + * tcl.m4: correct TCL_INCLUDES for private headers on Windows - it + doesn't need the eval. + +2004-02-10 Jeff Hobbs + + * tcl.m4: don't require TK_INCLUDES and TCL_INCLUDES to have the + DIR_NATIVE vars defined when using private headers on unix. + Allow $... to TEA_ADD_SOURCES for constructs like + TEA_ADD_SOURCES([\$(WIN_OBJECTS)]), that allow the developer to + place more in the Makefile.in. + tkUnixPort.h checks for HAVE_LIMITS_H, so do both HAVE and + CHECK on limits.h + +2003-12-10 Jeff Hobbs + + * Makefile.in: added TEA_ADD_LIBS, TEA_ADD_INCLUDES and + * configure: TEA_ADD_CFLAGS to configurable parameters with + * configure.in: PKG_* equivs in the Makefile. This allows the + * tclconfig/tcl.m4: user to worry less about actual magic VAR names. + Corrected Makefile.in to note that TEA_ADD_TCL_SOURCES requires + exact file names. + +2003-12-09 Jeff Hobbs + + * tcl.m4: updated OpenBSD support based on [Patch #775246] (cassoff) + +2003-12-05 Jeff Hobbs + + * configure: + * configure.in: + * Makefile.in (VPATH): readd $(srcdir) to front of VPATH as the + first part of VPATH can get chopped off. + Change .c.$(OBJEXT) rule to .c.@OBJEXT@ to support more makes. + * tclconfig/tcl.m4: add TEA_ADD_STUB_SOURCES to support libstub + generation and TEA_ADD_TCL_SOURCES to replace RUNTIME_SOURCES as + the way the user specifies library files. + +2003-12-03 Jeff Hobbs + + * configure: Update of TEA spec to (hopefully) simplify + * configure.in: some aspects of TEA by making use of more + * Makefile.in: AC 2.5x features. Use PACKAGE_NAME (instead + * generic/tclsample.c: of PACKAGE) and PACKAGE_VERSION (instead of + * tclconfig/tcl.m4: VERSION) arguments to AC_INIT as the TEA + package name and version. + Provide a version argument to TEA_INIT - starting with 3.0. + Drop all use of interior shell substs that older makefiles didn't + like. Use PKG_* naming convention instead. + Move specification of source files and public headers into + configure.in with TEA_ADD_SOURCES and TEA_ADD_HEADERS. These will + be munged during ./configure into the right obj file names (no + $(SOURCES:.c=.obj) needed). + There is almost nothing that should be touched in Makefile.in now + for the developer. May want to add a TEA_ADD_TCL_SOURCES for the + RUNTIME_SOURCES that remains. + Use SHLID_LD_FLAGS (instead of SHLID_LDFLAGS) as Tcl does. + Only specify the user requested LDFLAGS/CFLAGS in the Makefile, + don't mention the _OPTIMIZE/_DEBUG variants. + +2003-10-15 Jeff Hobbs + + * tcl.m4: create a TEA_SETUP_COMPILER_CC the precedes the + TEA_SETUP_COMPILER macro. They are split so the check for CC + occurs before any use of CC. Also add AC_PROG_CPP to the compiler + checks. + +2003-10-06 Jeff Hobbs + + * tcl.m4: Updated for autoconf 2.5x prereq. + Where TCL_WIDE_INT_TYPE would be __int64, defer to the code checks + in tcl.h, which also handles TCL_LL_MODIFIER* properly. + +2003-04-22 Jeff Hobbs + + * tcl.m4: correct default setting of ARCH for WinCE builds. + Correct \ escaping for CE sed macros. + +2003-04-10 Jeff Hobbs + + * tcl.m4: replace $(syscal) construct with older `syscall` for + systems where sh != bash. + +2003-04-09 Jeff Hobbs + + * tcl.m4 (TEA_WITH_CELIB): add --enable-wince and --with-celib + options for Windows/CE compilation support. Requires the + Microsoft eMbedded SDK and Keuchel's celib emulation layer. + +2003-02-18 Jeff Hobbs + + * tcl.m4 (TEA_ENABLE_THREADS): Make sure -lpthread gets passed on + the link line when checking for the pthread_attr_setstacksize + symbol. (dejong) + + * tcl.m4 (TEA_SETUP_COMPILER): added default calls to + TEA_TCL_EARLY_FLAGS, TEA_TCL_64BIT_FLAGS, + TEA_MISSING_POSIX_HEADERS and TEA_BUGGY_STRTOD. + +2003-02-14 Jeff Hobbs + + * tcl.m4: correct HP-UX ia64 --enable-64bit build flags + +2003-01-29 Jeff Hobbs + + * tcl.m4: check $prefix/lib as well as $exec_prefix/lib when + looking for tcl|tkConfig.sh, as this check is done before we would + set exec_prefix when the user does not define it. + +2003-01-21 Mo DeJong + + * tcl.m4 (TEA_CONFIG_CFLAGS): Fix build support + for mingw, the previous implementation would + use VC++ when compiling with mingw gcc. Don't + pass -fPIC since gcc always compiles pic code + under win32. Change some hard coded cases + of gcc to ${CC}. + +2002-10-15 Jeff Hobbs + + * tcl.m4: move the CFLAGS definition from TEA_ENABLE_SHARED to + TEA_MAKE_LIB because setting too early confuses other AC_* macros. + Correct the HP-11 SHLIB_LD_LIBS setting. + + * tcl.m4: add the CFLAGS definition into TEA_ENABLE_SHARED and + make it pick up the env CFLAGS at configure time. + +2002-10-09 Jeff Hobbs + + * tcl.m4: add --enable-symbols=mem option to enable TCL_MEM_DEBUG. + Improved AIX 64-bit build support, allow it on AIX-4 as well. + Enable 64-bit HP-11 compilation with gcc. + Enable 64-bit IRIX64-6 cc build support. + Correct FreeBSD thread library linkage. + Add OSF1 static build support. + Improve SunOS-5 shared build SHLIB_LD macro. + +2002-07-20 Zoran Vasiljevic + + * tcl.m4: Added MINGW32 to list of systems checked for Windows build. + Also, fixes some indentation issues with "--with-XXX" options. + +2002-04-23 Jeff Hobbs + + * tcl.m4 (TEA_ENABLE_THREADS): added USE_THREAD_ALLOC define to + use new threaded allocatory by default on Unix for Tcl 8.4. + (TEA_CONFIG_CFLAGS): corrected LD_SEARCH_FLAGS for FreeBSD-3+. + +2002-04-22 Jeff Hobbs + + * tcl.m4 (TEA_SETUP_COMPILER): removed call to AC_CYGWIN so that + we can use autoconf 2.5x as well as 2.13. This prevents us from + being able to warn against the use of cygwin gcc at configure + time, but allows autoconf 2.5x, which is what is shipped with most + newer systems. + +2002-04-11 Jeff Hobbs + + * tcl.m4: Enabled COFF as well as CV style debug info with + --enable-symbols to allow Dr. Watson users to see function info. + More info on debugging levels can be obtained at: + http://msdn.microsoft.com/library/en-us/dnvc60/html/gendepdebug.asp + +2002-04-03 Jeff Hobbs + + * tcl.m4: change all SC_* macros to TEA_*. The SC_ was for + Scriptics, which is no more. TEA represents a better, independent + prefix that won't need changing. + Added preliminary mingw gcc support. [Patch #538772] + Added TEA_PREFIX macro that handles defaulting the prefix and + exec_prefix vars to those used by Tcl if none were specified. + Added TEA_SETUP_COMPILER macro that encompasses the AC_PROG_CC + check and several other basic AC_PROG checks needed for making + executables. This greatly simplifies user's configure.in files. + Collapsed AIX-5 defines into AIX-* with extra checks for doing the + ELF stuff on AIX-5-ia64. + Updated TEA_ENABLE_THREADS to take an optional arg to allow + switching it on by default (for Thread) and add sanity checking to + warn the user if configuring threads incompatibly. + +2002-03-29 Jeff Hobbs + + * tcl.m4: made sure that SHLIB_LDFLAGS was set to LDFLAGS_DEFAULT. + Removed --enable-64bit support for AIX-4 because it wasn't correct. + Added -MT or -MD Windows linker switches to properly support + symbols-enabled builds. + +2002-03-28 Jeff Hobbs + + * tcl.m4: called AC_MSG_ERROR when SC_TEA_INIT wasn't called first + instead of calling it as that inlines it each time in shell code. + Changed Windows CFLAGS_OPTIMIZE to use -O2 instead of -Oti. + Noted TCL_LIB_VERSIONS_OK=nodots for Windows builds. + A few changes to support itcl (and perhaps others): + Added support for making your own stub libraries to SC_MAKE_LIB. + New SC_PATH_CONFIG and SC_LOAD_CONFIG that take a package name arg + and find that ${pkg}Config.sh file. itk uses this for itcl. + +2002-03-27 Jeff Hobbs + + * tcl.m4: made SC_LOAD_TKCONFIG recognize when working with a Tk + build dir setup. + Added EXTRA_CFLAGS and SHLIB_LD_LIBS substs to SC_CONFIG_CFLAGS. + Added XLIBSW onto LIBS when it is defined. + Remove TCL_LIBS from MAKE_LIB and correctly use SHLIB_LD_LIBS + instead to not rely as much on tclConfig.sh cached info. + Add TK_BIN_DIR to paths to find wish in SC_PROG_WISH. + These move towards making TEA much more independent of *Config.sh. + +2002-03-19 Jeff Hobbs + + * tcl.m4: corrected forgotten (UN)SHARED_LIB_SUFFIX and + SHLIB_SUFFIX defines for Win. + (SC_PATH_X): made this only do the check on unix platforms. + +2002-03-12 Jeff Hobbs + + * README.txt: updated to reflect fewer files + +2002-03-06 Jeff Hobbs + + * config.guess (removed): + * config.sub (removed): removed unnecessary files + + * installFile.tcl (removed): + * mkinstalldirs (removed): these aren't really necessary for + making TEA work + + * tcl.m4 (SC_PUBLIC_TCL_HEADERS, SC_PUBLIC_TK_HEADERS): don't + check /usr(/local)/include for includes on Windows when not using + gcc + +2002-03-05 Jeff Hobbs + + * tcl.m4: added warnings on Windows, removed RELPATH define and + added TCL_LIBS to MAKE_LIB macro. + + This import represents 2.0.0, or a new start at attempting to + make TEA much easier for C extension developers. + + **** moved from tclpro project to core tcl project, **** + **** renamed to 'tclconfig' **** + +2001-03-15 Karl Lehenbauer + + * installFile.tcl: Added updating of the modification time of + the target file whether we overwrote it or decided that it + hadn't changed. This was necessary for us to be able to + determine whether or not a module install touched the file. + +2001-03-08 Karl Lehenbauer + + * installFile.tcl: Added support for converting new-style (1.1+) + Cygnus drive paths to Tcl-style. + +2001-01-15 + + * tcl.m4: Added FreeBSD clause. + +2001-01-03 + + * tcl.m4: Fixed typo in SC_LIB_SPEC where it is checking + for exec-prefix. + +2000-12-01 + + * tcl.m4: Concatenated most of the Ajuba acsite.m4 file + so we don't need to modify the autoconf installation. + * config.guess: + * config.sub: + * installFile.tcl: + Added files from the itcl config subdirectory, + which should go away. + +2000-7-29 + + * Fixed the use of TCL_SRC_DIR and TK_SRC_DIR within + TCL_PRIVATE_INCLUDES and TK_PRIVATE_INCLUDES to match their recent + change from $(srcdir) to $(srcdir)/.. diff --git a/macosx/tclconfig/README.txt b/macosx/tclconfig/README.txt new file mode 100644 index 0000000..59b5a3e --- /dev/null +++ b/macosx/tclconfig/README.txt @@ -0,0 +1,26 @@ +These files comprise the basic building blocks for a Tcl Extension +Architecture (TEA) extension. For more information on TEA see: + + http://www.tcl.tk/doc/tea/ + +This package is part of the Tcl project at SourceForge, and latest +sources should be available there: + + http://tcl.sourceforge.net/ + +This package is a freely available open source package. You can do +virtually anything you like with it, such as modifying it, redistributing +it, and selling it either in whole or in part. + +CONTENTS +======== +The following is a short description of the files you will find in +the sample extension. + +README.txt This file + +install-sh Program used for copying binaries and script files + to their install locations. + +tcl.m4 Collection of Tcl autoconf macros. Included by a package's + aclocal.m4 to define TEA_* macros. diff --git a/macosx/tclconfig/install-sh b/macosx/tclconfig/install-sh new file mode 100755 index 0000000..7c34c3f --- /dev/null +++ b/macosx/tclconfig/install-sh @@ -0,0 +1,528 @@ +#!/bin/sh +# install - install a program, script, or datafile + +scriptversion=2011-04-20.01; # UTC + +# This originates from X11R5 (mit/util/scripts/install.sh), which was +# later released in X11R6 (xc/config/util/install.sh) with the +# following copyright and license. +# +# Copyright (C) 1994 X Consortium +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to +# deal in the Software without restriction, including without limitation the +# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +# sell copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- +# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +# +# Except as contained in this notice, the name of the X Consortium shall not +# be used in advertising or otherwise to promote the sale, use or other deal- +# ings in this Software without prior written authorization from the X Consor- +# tium. +# +# +# FSF changes to this file are in the public domain. +# +# Calling this script install-sh is preferred over install.sh, to prevent +# `make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# This script is compatible with the BSD install script, but was written +# from scratch. + +nl=' +' +IFS=" "" $nl" + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit=${DOITPROG-} +if test -z "$doit"; then + doit_exec=exec +else + doit_exec=$doit +fi + +# Put in absolute file names if you don't have them in your path; +# or use environment vars. + +chgrpprog=${CHGRPPROG-chgrp} +chmodprog=${CHMODPROG-chmod} +chownprog=${CHOWNPROG-chown} +cmpprog=${CMPPROG-cmp} +cpprog=${CPPROG-cp} +mkdirprog=${MKDIRPROG-mkdir} +mvprog=${MVPROG-mv} +rmprog=${RMPROG-rm} +stripprog=${STRIPPROG-strip} + +posix_glob='?' +initialize_posix_glob=' + test "$posix_glob" != "?" || { + if (set -f) 2>/dev/null; then + posix_glob= + else + posix_glob=: + fi + } +' + +posix_mkdir= + +# Desired mode of installed file. +mode=0755 + +chgrpcmd= +chmodcmd=$chmodprog +chowncmd= +mvcmd=$mvprog +rmcmd="$rmprog -f" +stripcmd= + +src= +dst= +dir_arg= +dst_arg= + +copy_on_change=false +no_target_directory= + +usage="\ +Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE + or: $0 [OPTION]... SRCFILES... DIRECTORY + or: $0 [OPTION]... -t DIRECTORY SRCFILES... + or: $0 [OPTION]... -d DIRECTORIES... + +In the 1st form, copy SRCFILE to DSTFILE. +In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. +In the 4th, create DIRECTORIES. + +Options: + --help display this help and exit. + --version display version info and exit. + + -c (ignored) + -C install only if different (preserve the last data modification time) + -d create directories instead of installing files. + -g GROUP $chgrpprog installed files to GROUP. + -m MODE $chmodprog installed files to MODE. + -o USER $chownprog installed files to USER. + -s $stripprog installed files. + -S $stripprog installed files. + -t DIRECTORY install into DIRECTORY. + -T report an error if DSTFILE is a directory. + +Environment variables override the default commands: + CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG + RMPROG STRIPPROG +" + +while test $# -ne 0; do + case $1 in + -c) ;; + + -C) copy_on_change=true;; + + -d) dir_arg=true;; + + -g) chgrpcmd="$chgrpprog $2" + shift;; + + --help) echo "$usage"; exit $?;; + + -m) mode=$2 + case $mode in + *' '* | *' '* | *' +'* | *'*'* | *'?'* | *'['*) + echo "$0: invalid mode: $mode" >&2 + exit 1;; + esac + shift;; + + -o) chowncmd="$chownprog $2" + shift;; + + -s) stripcmd=$stripprog;; + + -S) stripcmd="$stripprog $2" + shift;; + + -t) dst_arg=$2 + shift;; + + -T) no_target_directory=true;; + + --version) echo "$0 $scriptversion"; exit $?;; + + --) shift + break;; + + -*) echo "$0: invalid option: $1" >&2 + exit 1;; + + *) break;; + esac + shift +done + +if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then + # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dst_arg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dst_arg" + shift # fnord + fi + shift # arg + dst_arg=$arg + done +fi + +if test $# -eq 0; then + if test -z "$dir_arg"; then + echo "$0: no input file specified." >&2 + exit 1 + fi + # It's OK to call `install-sh -d' without argument. + # This can happen when creating conditional directories. + exit 0 +fi + +if test -z "$dir_arg"; then + do_exit='(exit $ret); exit $ret' + trap "ret=129; $do_exit" 1 + trap "ret=130; $do_exit" 2 + trap "ret=141; $do_exit" 13 + trap "ret=143; $do_exit" 15 + + # Set umask so as not to create temps with too-generous modes. + # However, 'strip' requires both read and write access to temps. + case $mode in + # Optimize common cases. + *644) cp_umask=133;; + *755) cp_umask=22;; + + *[0-7]) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw='% 200' + fi + cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; + *) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw=,u+rw + fi + cp_umask=$mode$u_plus_rw;; + esac +fi + +for src +do + # Protect names starting with `-'. + case $src in + -*) src=./$src;; + esac + + if test -n "$dir_arg"; then + dst=$src + dstdir=$dst + test -d "$dstdir" + dstdir_status=$? + else + + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + if test ! -f "$src" && test ! -d "$src"; then + echo "$0: $src does not exist." >&2 + exit 1 + fi + + if test -z "$dst_arg"; then + echo "$0: no destination specified." >&2 + exit 1 + fi + + dst=$dst_arg + # Protect names starting with `-'. + case $dst in + -*) dst=./$dst;; + esac + + # If destination is a directory, append the input filename; won't work + # if double slashes aren't ignored. + if test -d "$dst"; then + if test -n "$no_target_directory"; then + echo "$0: $dst_arg: Is a directory" >&2 + exit 1 + fi + dstdir=$dst + dst=$dstdir/`basename "$src"` + dstdir_status=0 + else + # Prefer dirname, but fall back on a substitute if dirname fails. + dstdir=` + (dirname "$dst") 2>/dev/null || + expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$dst" : 'X\(//\)[^/]' \| \ + X"$dst" : 'X\(//\)$' \| \ + X"$dst" : 'X\(/\)' \| . 2>/dev/null || + echo X"$dst" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q' + ` + + test -d "$dstdir" + dstdir_status=$? + fi + fi + + obsolete_mkdir_used=false + + if test $dstdir_status != 0; then + case $posix_mkdir in + '') + # Create intermediate dirs using mode 755 as modified by the umask. + # This is like FreeBSD 'install' as of 1997-10-28. + umask=`umask` + case $stripcmd.$umask in + # Optimize common cases. + *[2367][2367]) mkdir_umask=$umask;; + .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; + + *[0-7]) + mkdir_umask=`expr $umask + 22 \ + - $umask % 100 % 40 + $umask % 20 \ + - $umask % 10 % 4 + $umask % 2 + `;; + *) mkdir_umask=$umask,go-w;; + esac + + # With -d, create the new directory with the user-specified mode. + # Otherwise, rely on $mkdir_umask. + if test -n "$dir_arg"; then + mkdir_mode=-m$mode + else + mkdir_mode= + fi + + posix_mkdir=false + case $umask in + *[123567][0-7][0-7]) + # POSIX mkdir -p sets u+wx bits regardless of umask, which + # is incompatible with FreeBSD 'install' when (umask & 300) != 0. + ;; + *) + tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ + trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 + + if (umask $mkdir_umask && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 + then + if test -z "$dir_arg" || { + # Check for POSIX incompatibilities with -m. + # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or + # other-writeable bit of parent directory when it shouldn't. + # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. + ls_ld_tmpdir=`ls -ld "$tmpdir"` + case $ls_ld_tmpdir in + d????-?r-*) different_mode=700;; + d????-?--*) different_mode=755;; + *) false;; + esac && + $mkdirprog -m$different_mode -p -- "$tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$tmpdir"` + test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" + } + } + then posix_mkdir=: + fi + rmdir "$tmpdir/d" "$tmpdir" + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null + fi + trap '' 0;; + esac;; + esac + + if + $posix_mkdir && ( + umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" + ) + then : + else + + # The umask is ridiculous, or mkdir does not conform to POSIX, + # or it failed possibly due to a race condition. Create the + # directory the slow way, step by step, checking for races as we go. + + case $dstdir in + /*) prefix='/';; + -*) prefix='./';; + *) prefix='';; + esac + + eval "$initialize_posix_glob" + + oIFS=$IFS + IFS=/ + $posix_glob set -f + set fnord $dstdir + shift + $posix_glob set +f + IFS=$oIFS + + prefixes= + + for d + do + test -z "$d" && continue + + prefix=$prefix$d + if test -d "$prefix"; then + prefixes= + else + if $posix_mkdir; then + (umask=$mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break + # Don't fail if two instances are running concurrently. + test -d "$prefix" || exit 1 + else + case $prefix in + *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; + *) qprefix=$prefix;; + esac + prefixes="$prefixes '$qprefix'" + fi + fi + prefix=$prefix/ + done + + if test -n "$prefixes"; then + # Don't fail if two instances are running concurrently. + (umask $mkdir_umask && + eval "\$doit_exec \$mkdirprog $prefixes") || + test -d "$dstdir" || exit 1 + obsolete_mkdir_used=true + fi + fi + fi + + if test -n "$dir_arg"; then + { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && + { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || + test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 + else + + # Make a couple of temp file names in the proper directory. + dsttmp=$dstdir/_inst.$$_ + rmtmp=$dstdir/_rm.$$_ + + # Trap to clean up those temp files at exit. + trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 + + # Copy the file name to the temp name. + (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && + + # and set any options; do chmod last to preserve setuid bits. + # + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $cpprog $src $dsttmp" command. + # + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && + { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && + { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && + + # If -C, don't bother to copy if it wouldn't change the file. + if $copy_on_change && + old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && + new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && + + eval "$initialize_posix_glob" && + $posix_glob set -f && + set X $old && old=:$2:$4:$5:$6 && + set X $new && new=:$2:$4:$5:$6 && + $posix_glob set +f && + + test "$old" = "$new" && + $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 + then + rm -f "$dsttmp" + else + # Rename the file to the real destination. + $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || + + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + { + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + test ! -f "$dst" || + $doit $rmcmd -f "$dst" 2>/dev/null || + { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && + { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } + } || + { echo "$0: cannot unlink or rename $dst" >&2 + (exit 1); exit 1 + } + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dst" + } + fi || exit 1 + + trap '' 0 + fi +done + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/macosx/tclconfig/tcl.m4 b/macosx/tclconfig/tcl.m4 new file mode 100644 index 0000000..8bc9c83 --- /dev/null +++ b/macosx/tclconfig/tcl.m4 @@ -0,0 +1,4150 @@ +# tcl.m4 -- +# +# This file provides a set of autoconf macros to help TEA-enable +# a Tcl extension. +# +# Copyright (c) 1999-2000 Ajuba Solutions. +# Copyright (c) 2002-2005 ActiveState Corporation. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. + +AC_PREREQ(2.57) + +dnl TEA extensions pass us the version of TEA they think they +dnl are compatible with (must be set in TEA_INIT below) +dnl TEA_VERSION="3.9" + +# Possible values for key variables defined: +# +# TEA_WINDOWINGSYSTEM - win32 aqua x11 (mirrors 'tk windowingsystem') +# TEA_PLATFORM - windows unix +# + +#------------------------------------------------------------------------ +# TEA_PATH_TCLCONFIG -- +# +# Locate the tclConfig.sh file and perform a sanity check on +# the Tcl compile flags +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --with-tcl=... +# +# Defines the following vars: +# TCL_BIN_DIR Full path to the directory containing +# the tclConfig.sh file +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PATH_TCLCONFIG], [ + dnl TEA specific: Make sure we are initialized + AC_REQUIRE([TEA_INIT]) + # + # Ok, lets find the tcl configuration + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-tcl + # + + if test x"${no_tcl}" = x ; then + # we reset no_tcl in case something fails here + no_tcl=true + AC_ARG_WITH(tcl, + AC_HELP_STRING([--with-tcl], + [directory containing tcl configuration (tclConfig.sh)]), + with_tclconfig="${withval}") + AC_MSG_CHECKING([for Tcl configuration]) + AC_CACHE_VAL(ac_cv_c_tclconfig,[ + + # First check to see if --with-tcl was specified. + if test x"${with_tclconfig}" != x ; then + case "${with_tclconfig}" in + */tclConfig.sh ) + if test -f "${with_tclconfig}"; then + AC_MSG_WARN([--with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself]) + with_tclconfig="`echo "${with_tclconfig}" | sed 's!/tclConfig\.sh$!!'`" + fi ;; + esac + if test -f "${with_tclconfig}/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd "${with_tclconfig}"; pwd)`" + else + AC_MSG_ERROR([${with_tclconfig} directory doesn't contain tclConfig.sh]) + fi + fi + + # then check for a private Tcl installation + if test x"${ac_cv_c_tclconfig}" = x ; then + for i in \ + ../tcl \ + `ls -dr ../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../tcl[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../tcl[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../tcl \ + `ls -dr ../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../../tcl[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../tcl[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../../tcl \ + `ls -dr ../../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../../../tcl[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do + if test "${TEA_PLATFORM}" = "windows" \ + -a -f "$i/win/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i/win; pwd)`" + break + fi + if test -f "$i/unix/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i/unix; pwd)`" + break + fi + done + fi + + # on Darwin, check in Framework installation locations + if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tclconfig}" = x ; then + for i in `ls -d ~/Library/Frameworks 2>/dev/null` \ + `ls -d /Library/Frameworks 2>/dev/null` \ + `ls -d /Network/Library/Frameworks 2>/dev/null` \ + `ls -d /System/Library/Frameworks 2>/dev/null` \ + ; do + if test -f "$i/Tcl.framework/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i/Tcl.framework; pwd)`" + break + fi + done + fi + + # TEA specific: on Windows, check in common installation locations + if test "${TEA_PLATFORM}" = "windows" \ + -a x"${ac_cv_c_tclconfig}" = x ; then + for i in `ls -d C:/Tcl/lib 2>/dev/null` \ + `ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \ + ; do + if test -f "$i/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i; pwd)`" + break + fi + done + fi + + # check in a few common install locations + if test x"${ac_cv_c_tclconfig}" = x ; then + for i in `ls -d ${libdir} 2>/dev/null` \ + `ls -d ${exec_prefix}/lib 2>/dev/null` \ + `ls -d ${prefix}/lib 2>/dev/null` \ + `ls -d /usr/local/lib 2>/dev/null` \ + `ls -d /usr/contrib/lib 2>/dev/null` \ + `ls -d /usr/lib 2>/dev/null` \ + `ls -d /usr/lib64 2>/dev/null` \ + ; do + if test -f "$i/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i; pwd)`" + break + fi + done + fi + + # check in a few other private locations + if test x"${ac_cv_c_tclconfig}" = x ; then + for i in \ + ${srcdir}/../tcl \ + `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do + if test "${TEA_PLATFORM}" = "windows" \ + -a -f "$i/win/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i/win; pwd)`" + break + fi + if test -f "$i/unix/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i/unix; pwd)`" + break + fi + done + fi + ]) + + if test x"${ac_cv_c_tclconfig}" = x ; then + TCL_BIN_DIR="# no Tcl configs found" + AC_MSG_ERROR([Can't find Tcl configuration definitions. Use --with-tcl to specify a directory containing tclConfig.sh]) + else + no_tcl= + TCL_BIN_DIR="${ac_cv_c_tclconfig}" + AC_MSG_RESULT([found ${TCL_BIN_DIR}/tclConfig.sh]) + fi + fi +]) + +#------------------------------------------------------------------------ +# TEA_PATH_TKCONFIG -- +# +# Locate the tkConfig.sh file +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --with-tk=... +# +# Defines the following vars: +# TK_BIN_DIR Full path to the directory containing +# the tkConfig.sh file +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PATH_TKCONFIG], [ + # + # Ok, lets find the tk configuration + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-tk + # + + if test x"${no_tk}" = x ; then + # we reset no_tk in case something fails here + no_tk=true + AC_ARG_WITH(tk, + AC_HELP_STRING([--with-tk], + [directory containing tk configuration (tkConfig.sh)]), + with_tkconfig="${withval}") + AC_MSG_CHECKING([for Tk configuration]) + AC_CACHE_VAL(ac_cv_c_tkconfig,[ + + # First check to see if --with-tkconfig was specified. + if test x"${with_tkconfig}" != x ; then + case "${with_tkconfig}" in + */tkConfig.sh ) + if test -f "${with_tkconfig}"; then + AC_MSG_WARN([--with-tk argument should refer to directory containing tkConfig.sh, not to tkConfig.sh itself]) + with_tkconfig="`echo "${with_tkconfig}" | sed 's!/tkConfig\.sh$!!'`" + fi ;; + esac + if test -f "${with_tkconfig}/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd "${with_tkconfig}"; pwd)`" + else + AC_MSG_ERROR([${with_tkconfig} directory doesn't contain tkConfig.sh]) + fi + fi + + # then check for a private Tk library + if test x"${ac_cv_c_tkconfig}" = x ; then + for i in \ + ../tk \ + `ls -dr ../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../tk[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../tk[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../tk \ + `ls -dr ../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../../tk[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../tk[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../../tk \ + `ls -dr ../../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../../../tk[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do + if test "${TEA_PLATFORM}" = "windows" \ + -a -f "$i/win/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i/win; pwd)`" + break + fi + if test -f "$i/unix/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i/unix; pwd)`" + break + fi + done + fi + + # on Darwin, check in Framework installation locations + if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tkconfig}" = x ; then + for i in `ls -d ~/Library/Frameworks 2>/dev/null` \ + `ls -d /Library/Frameworks 2>/dev/null` \ + `ls -d /Network/Library/Frameworks 2>/dev/null` \ + `ls -d /System/Library/Frameworks 2>/dev/null` \ + ; do + if test -f "$i/Tk.framework/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i/Tk.framework; pwd)`" + break + fi + done + fi + + # check in a few common install locations + if test x"${ac_cv_c_tkconfig}" = x ; then + for i in `ls -d ${libdir} 2>/dev/null` \ + `ls -d ${exec_prefix}/lib 2>/dev/null` \ + `ls -d ${prefix}/lib 2>/dev/null` \ + `ls -d /usr/local/lib 2>/dev/null` \ + `ls -d /usr/contrib/lib 2>/dev/null` \ + `ls -d /usr/lib 2>/dev/null` \ + `ls -d /usr/lib64 2>/dev/null` \ + ; do + if test -f "$i/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i; pwd)`" + break + fi + done + fi + + # TEA specific: on Windows, check in common installation locations + if test "${TEA_PLATFORM}" = "windows" \ + -a x"${ac_cv_c_tkconfig}" = x ; then + for i in `ls -d C:/Tcl/lib 2>/dev/null` \ + `ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \ + ; do + if test -f "$i/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i; pwd)`" + break + fi + done + fi + + # check in a few other private locations + if test x"${ac_cv_c_tkconfig}" = x ; then + for i in \ + ${srcdir}/../tk \ + `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do + if test "${TEA_PLATFORM}" = "windows" \ + -a -f "$i/win/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i/win; pwd)`" + break + fi + if test -f "$i/unix/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i/unix; pwd)`" + break + fi + done + fi + ]) + + if test x"${ac_cv_c_tkconfig}" = x ; then + TK_BIN_DIR="# no Tk configs found" + AC_MSG_ERROR([Can't find Tk configuration definitions. Use --with-tk to specify a directory containing tkConfig.sh]) + else + no_tk= + TK_BIN_DIR="${ac_cv_c_tkconfig}" + AC_MSG_RESULT([found ${TK_BIN_DIR}/tkConfig.sh]) + fi + fi +]) + +#------------------------------------------------------------------------ +# TEA_LOAD_TCLCONFIG -- +# +# Load the tclConfig.sh file +# +# Arguments: +# +# Requires the following vars to be set: +# TCL_BIN_DIR +# +# Results: +# +# Substitutes the following vars: +# TCL_BIN_DIR +# TCL_SRC_DIR +# TCL_LIB_FILE +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_LOAD_TCLCONFIG], [ + AC_MSG_CHECKING([for existence of ${TCL_BIN_DIR}/tclConfig.sh]) + + if test -f "${TCL_BIN_DIR}/tclConfig.sh" ; then + AC_MSG_RESULT([loading]) + . "${TCL_BIN_DIR}/tclConfig.sh" + else + AC_MSG_RESULT([could not find ${TCL_BIN_DIR}/tclConfig.sh]) + fi + + # eval is required to do the TCL_DBGX substitution + eval "TCL_LIB_FILE=\"${TCL_LIB_FILE}\"" + eval "TCL_STUB_LIB_FILE=\"${TCL_STUB_LIB_FILE}\"" + + # If the TCL_BIN_DIR is the build directory (not the install directory), + # then set the common variable name to the value of the build variables. + # For example, the variable TCL_LIB_SPEC will be set to the value + # of TCL_BUILD_LIB_SPEC. An extension should make use of TCL_LIB_SPEC + # instead of TCL_BUILD_LIB_SPEC since it will work with both an + # installed and uninstalled version of Tcl. + if test -f "${TCL_BIN_DIR}/Makefile" ; then + TCL_LIB_SPEC="${TCL_BUILD_LIB_SPEC}" + TCL_STUB_LIB_SPEC="${TCL_BUILD_STUB_LIB_SPEC}" + TCL_STUB_LIB_PATH="${TCL_BUILD_STUB_LIB_PATH}" + elif test "`uname -s`" = "Darwin"; then + # If Tcl was built as a framework, attempt to use the libraries + # from the framework at the given location so that linking works + # against Tcl.framework installed in an arbitrary location. + case ${TCL_DEFS} in + *TCL_FRAMEWORK*) + if test -f "${TCL_BIN_DIR}/${TCL_LIB_FILE}"; then + for i in "`cd "${TCL_BIN_DIR}"; pwd`" \ + "`cd "${TCL_BIN_DIR}"/../..; pwd`"; do + if test "`basename "$i"`" = "${TCL_LIB_FILE}.framework"; then + TCL_LIB_SPEC="-F`dirname "$i" | sed -e 's/ /\\\\ /g'` -framework ${TCL_LIB_FILE}" + break + fi + done + fi + if test -f "${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}"; then + TCL_STUB_LIB_SPEC="-L`echo "${TCL_BIN_DIR}" | sed -e 's/ /\\\\ /g'` ${TCL_STUB_LIB_FLAG}" + TCL_STUB_LIB_PATH="${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}" + fi + ;; + esac + fi + + # eval is required to do the TCL_DBGX substitution + eval "TCL_LIB_FLAG=\"${TCL_LIB_FLAG}\"" + eval "TCL_LIB_SPEC=\"${TCL_LIB_SPEC}\"" + eval "TCL_STUB_LIB_FLAG=\"${TCL_STUB_LIB_FLAG}\"" + eval "TCL_STUB_LIB_SPEC=\"${TCL_STUB_LIB_SPEC}\"" + + AC_SUBST(TCL_VERSION) + AC_SUBST(TCL_PATCH_LEVEL) + AC_SUBST(TCL_BIN_DIR) + AC_SUBST(TCL_SRC_DIR) + + AC_SUBST(TCL_LIB_FILE) + AC_SUBST(TCL_LIB_FLAG) + AC_SUBST(TCL_LIB_SPEC) + + AC_SUBST(TCL_STUB_LIB_FILE) + AC_SUBST(TCL_STUB_LIB_FLAG) + AC_SUBST(TCL_STUB_LIB_SPEC) + + AC_MSG_CHECKING([platform]) + hold_cc=$CC; CC="$TCL_CC" + AC_TRY_COMPILE(,[ + #ifdef _WIN32 + #error win32 + #endif + ], TEA_PLATFORM="unix", + TEA_PLATFORM="windows" + ) + CC=$hold_cc + AC_MSG_RESULT($TEA_PLATFORM) + + # The BUILD_$pkg is to define the correct extern storage class + # handling when making this package + AC_DEFINE_UNQUOTED(BUILD_${PACKAGE_NAME}, [], + [Building extension source?]) + # Do this here as we have fully defined TEA_PLATFORM now + if test "${TEA_PLATFORM}" = "windows" ; then + EXEEXT=".exe" + CLEANFILES="$CLEANFILES *.lib *.dll *.pdb *.exp" + fi + + # TEA specific: + AC_SUBST(CLEANFILES) + AC_SUBST(TCL_LIBS) + AC_SUBST(TCL_DEFS) + AC_SUBST(TCL_EXTRA_CFLAGS) + AC_SUBST(TCL_LD_FLAGS) + AC_SUBST(TCL_SHLIB_LD_LIBS) +]) + +#------------------------------------------------------------------------ +# TEA_LOAD_TKCONFIG -- +# +# Load the tkConfig.sh file +# +# Arguments: +# +# Requires the following vars to be set: +# TK_BIN_DIR +# +# Results: +# +# Sets the following vars that should be in tkConfig.sh: +# TK_BIN_DIR +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_LOAD_TKCONFIG], [ + AC_MSG_CHECKING([for existence of ${TK_BIN_DIR}/tkConfig.sh]) + + if test -f "${TK_BIN_DIR}/tkConfig.sh" ; then + AC_MSG_RESULT([loading]) + . "${TK_BIN_DIR}/tkConfig.sh" + else + AC_MSG_RESULT([could not find ${TK_BIN_DIR}/tkConfig.sh]) + fi + + # eval is required to do the TK_DBGX substitution + eval "TK_LIB_FILE=\"${TK_LIB_FILE}\"" + eval "TK_STUB_LIB_FILE=\"${TK_STUB_LIB_FILE}\"" + + # If the TK_BIN_DIR is the build directory (not the install directory), + # then set the common variable name to the value of the build variables. + # For example, the variable TK_LIB_SPEC will be set to the value + # of TK_BUILD_LIB_SPEC. An extension should make use of TK_LIB_SPEC + # instead of TK_BUILD_LIB_SPEC since it will work with both an + # installed and uninstalled version of Tcl. + if test -f "${TK_BIN_DIR}/Makefile" ; then + TK_LIB_SPEC="${TK_BUILD_LIB_SPEC}" + TK_STUB_LIB_SPEC="${TK_BUILD_STUB_LIB_SPEC}" + TK_STUB_LIB_PATH="${TK_BUILD_STUB_LIB_PATH}" + elif test "`uname -s`" = "Darwin"; then + # If Tk was built as a framework, attempt to use the libraries + # from the framework at the given location so that linking works + # against Tk.framework installed in an arbitrary location. + case ${TK_DEFS} in + *TK_FRAMEWORK*) + if test -f "${TK_BIN_DIR}/${TK_LIB_FILE}"; then + for i in "`cd "${TK_BIN_DIR}"; pwd`" \ + "`cd "${TK_BIN_DIR}"/../..; pwd`"; do + if test "`basename "$i"`" = "${TK_LIB_FILE}.framework"; then + TK_LIB_SPEC="-F`dirname "$i" | sed -e 's/ /\\\\ /g'` -framework ${TK_LIB_FILE}" + break + fi + done + fi + if test -f "${TK_BIN_DIR}/${TK_STUB_LIB_FILE}"; then + TK_STUB_LIB_SPEC="-L` echo "${TK_BIN_DIR}" | sed -e 's/ /\\\\ /g'` ${TK_STUB_LIB_FLAG}" + TK_STUB_LIB_PATH="${TK_BIN_DIR}/${TK_STUB_LIB_FILE}" + fi + ;; + esac + fi + + # eval is required to do the TK_DBGX substitution + eval "TK_LIB_FLAG=\"${TK_LIB_FLAG}\"" + eval "TK_LIB_SPEC=\"${TK_LIB_SPEC}\"" + eval "TK_STUB_LIB_FLAG=\"${TK_STUB_LIB_FLAG}\"" + eval "TK_STUB_LIB_SPEC=\"${TK_STUB_LIB_SPEC}\"" + + # TEA specific: Ensure windowingsystem is defined + if test "${TEA_PLATFORM}" = "unix" ; then + case ${TK_DEFS} in + *MAC_OSX_TK*) + AC_DEFINE(MAC_OSX_TK, 1, [Are we building against Mac OS X TkAqua?]) + TEA_WINDOWINGSYSTEM="aqua" + ;; + *) + TEA_WINDOWINGSYSTEM="x11" + ;; + esac + elif test "${TEA_PLATFORM}" = "windows" ; then + TEA_WINDOWINGSYSTEM="win32" + fi + + AC_SUBST(TK_VERSION) + AC_SUBST(TK_BIN_DIR) + AC_SUBST(TK_SRC_DIR) + + AC_SUBST(TK_LIB_FILE) + AC_SUBST(TK_LIB_FLAG) + AC_SUBST(TK_LIB_SPEC) + + AC_SUBST(TK_STUB_LIB_FILE) + AC_SUBST(TK_STUB_LIB_FLAG) + AC_SUBST(TK_STUB_LIB_SPEC) + + # TEA specific: + AC_SUBST(TK_LIBS) + AC_SUBST(TK_XINCLUDES) +]) + +#------------------------------------------------------------------------ +# TEA_PROG_TCLSH +# Determine the fully qualified path name of the tclsh executable +# in the Tcl build directory or the tclsh installed in a bin +# directory. This macro will correctly determine the name +# of the tclsh executable even if tclsh has not yet been +# built in the build directory. The tclsh found is always +# associated with a tclConfig.sh file. This tclsh should be used +# only for running extension test cases. It should never be +# or generation of files (like pkgIndex.tcl) at build time. +# +# Arguments: +# none +# +# Results: +# Substitutes the following vars: +# TCLSH_PROG +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PROG_TCLSH], [ + AC_MSG_CHECKING([for tclsh]) + if test -f "${TCL_BIN_DIR}/Makefile" ; then + # tclConfig.sh is in Tcl build directory + if test "${TEA_PLATFORM}" = "windows"; then + TCLSH_PROG="${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}" + else + TCLSH_PROG="${TCL_BIN_DIR}/tclsh" + fi + else + # tclConfig.sh is in install location + if test "${TEA_PLATFORM}" = "windows"; then + TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}" + else + TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}.${TCL_MINOR_VERSION}${TCL_DBGX}" + fi + list="`ls -d ${TCL_BIN_DIR}/../bin 2>/dev/null` \ + `ls -d ${TCL_BIN_DIR}/.. 2>/dev/null` \ + `ls -d ${TCL_PREFIX}/bin 2>/dev/null`" + for i in $list ; do + if test -f "$i/${TCLSH_PROG}" ; then + REAL_TCL_BIN_DIR="`cd "$i"; pwd`/" + break + fi + done + TCLSH_PROG="${REAL_TCL_BIN_DIR}${TCLSH_PROG}" + fi + AC_MSG_RESULT([${TCLSH_PROG}]) + AC_SUBST(TCLSH_PROG) +]) + +#------------------------------------------------------------------------ +# TEA_PROG_WISH +# Determine the fully qualified path name of the wish executable +# in the Tk build directory or the wish installed in a bin +# directory. This macro will correctly determine the name +# of the wish executable even if wish has not yet been +# built in the build directory. The wish found is always +# associated with a tkConfig.sh file. This wish should be used +# only for running extension test cases. It should never be +# or generation of files (like pkgIndex.tcl) at build time. +# +# Arguments: +# none +# +# Results: +# Substitutes the following vars: +# WISH_PROG +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PROG_WISH], [ + AC_MSG_CHECKING([for wish]) + if test -f "${TK_BIN_DIR}/Makefile" ; then + # tkConfig.sh is in Tk build directory + if test "${TEA_PLATFORM}" = "windows"; then + WISH_PROG="${TK_BIN_DIR}/wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}${EXEEXT}" + else + WISH_PROG="${TK_BIN_DIR}/wish" + fi + else + # tkConfig.sh is in install location + if test "${TEA_PLATFORM}" = "windows"; then + WISH_PROG="wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}${EXEEXT}" + else + WISH_PROG="wish${TK_MAJOR_VERSION}.${TK_MINOR_VERSION}${TK_DBGX}" + fi + list="`ls -d ${TK_BIN_DIR}/../bin 2>/dev/null` \ + `ls -d ${TK_BIN_DIR}/.. 2>/dev/null` \ + `ls -d ${TK_PREFIX}/bin 2>/dev/null`" + for i in $list ; do + if test -f "$i/${WISH_PROG}" ; then + REAL_TK_BIN_DIR="`cd "$i"; pwd`/" + break + fi + done + WISH_PROG="${REAL_TK_BIN_DIR}${WISH_PROG}" + fi + AC_MSG_RESULT([${WISH_PROG}]) + AC_SUBST(WISH_PROG) +]) + +#------------------------------------------------------------------------ +# TEA_ENABLE_SHARED -- +# +# Allows the building of shared libraries +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --enable-shared=yes|no +# +# Defines the following vars: +# STATIC_BUILD Used for building import/export libraries +# on Windows. +# +# Sets the following vars: +# SHARED_BUILD Value of 1 or 0 +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_ENABLE_SHARED], [ + AC_MSG_CHECKING([how to build libraries]) + AC_ARG_ENABLE(shared, + AC_HELP_STRING([--enable-shared], + [build and link with shared libraries (default: on)]), + [tcl_ok=$enableval], [tcl_ok=yes]) + + if test "${enable_shared+set}" = set; then + enableval="$enable_shared" + tcl_ok=$enableval + else + tcl_ok=yes + fi + + if test "$tcl_ok" = "yes" ; then + AC_MSG_RESULT([shared]) + SHARED_BUILD=1 + else + AC_MSG_RESULT([static]) + SHARED_BUILD=0 + AC_DEFINE(STATIC_BUILD, 1, [Is this a static build?]) + fi + AC_SUBST(SHARED_BUILD) +]) + +#------------------------------------------------------------------------ +# TEA_ENABLE_THREADS -- +# +# Specify if thread support should be enabled. If "yes" is specified +# as an arg (optional), threads are enabled by default, "no" means +# threads are disabled. "yes" is the default. +# +# TCL_THREADS is checked so that if you are compiling an extension +# against a threaded core, your extension must be compiled threaded +# as well. +# +# Note that it is legal to have a thread enabled extension run in a +# threaded or non-threaded Tcl core, but a non-threaded extension may +# only run in a non-threaded Tcl core. +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --enable-threads +# +# Sets the following vars: +# THREADS_LIBS Thread library(s) +# +# Defines the following vars: +# TCL_THREADS +# _REENTRANT +# _THREAD_SAFE +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_ENABLE_THREADS], [ + AC_ARG_ENABLE(threads, + AC_HELP_STRING([--enable-threads], + [build with threads]), + [tcl_ok=$enableval], [tcl_ok=yes]) + + if test "${enable_threads+set}" = set; then + enableval="$enable_threads" + tcl_ok=$enableval + else + tcl_ok=yes + fi + + if test "$tcl_ok" = "yes" -o "${TCL_THREADS}" = 1; then + TCL_THREADS=1 + + if test "${TEA_PLATFORM}" != "windows" ; then + # We are always OK on Windows, so check what this platform wants: + + # USE_THREAD_ALLOC tells us to try the special thread-based + # allocator that significantly reduces lock contention + AC_DEFINE(USE_THREAD_ALLOC, 1, + [Do we want to use the threaded memory allocator?]) + AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?]) + if test "`uname -s`" = "SunOS" ; then + AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1, + [Do we really want to follow the standard? Yes we do!]) + fi + AC_DEFINE(_THREAD_SAFE, 1, [Do we want the thread-safe OS API?]) + AC_CHECK_LIB(pthread,pthread_mutex_init,tcl_ok=yes,tcl_ok=no) + if test "$tcl_ok" = "no"; then + # Check a little harder for __pthread_mutex_init in the same + # library, as some systems hide it there until pthread.h is + # defined. We could alternatively do an AC_TRY_COMPILE with + # pthread.h, but that will work with libpthread really doesn't + # exist, like AIX 4.2. [Bug: 4359] + AC_CHECK_LIB(pthread, __pthread_mutex_init, + tcl_ok=yes, tcl_ok=no) + fi + + if test "$tcl_ok" = "yes"; then + # The space is needed + THREADS_LIBS=" -lpthread" + else + AC_CHECK_LIB(pthreads, pthread_mutex_init, + tcl_ok=yes, tcl_ok=no) + if test "$tcl_ok" = "yes"; then + # The space is needed + THREADS_LIBS=" -lpthreads" + else + AC_CHECK_LIB(c, pthread_mutex_init, + tcl_ok=yes, tcl_ok=no) + if test "$tcl_ok" = "no"; then + AC_CHECK_LIB(c_r, pthread_mutex_init, + tcl_ok=yes, tcl_ok=no) + if test "$tcl_ok" = "yes"; then + # The space is needed + THREADS_LIBS=" -pthread" + else + TCL_THREADS=0 + AC_MSG_WARN([Do not know how to find pthread lib on your system - thread support disabled]) + fi + fi + fi + fi + fi + else + TCL_THREADS=0 + fi + # Do checking message here to not mess up interleaved configure output + AC_MSG_CHECKING([for building with threads]) + if test "${TCL_THREADS}" = 1; then + AC_DEFINE(TCL_THREADS, 1, [Are we building with threads enabled?]) + AC_MSG_RESULT([yes (default)]) + else + AC_MSG_RESULT([no]) + fi + # TCL_THREADS sanity checking. See if our request for building with + # threads is the same as the way Tcl was built. If not, warn the user. + case ${TCL_DEFS} in + *THREADS=1*) + if test "${TCL_THREADS}" = "0"; then + AC_MSG_WARN([ + Building ${PACKAGE_NAME} without threads enabled, but building against Tcl + that IS thread-enabled. It is recommended to use --enable-threads.]) + fi + ;; + *) + if test "${TCL_THREADS}" = "1"; then + AC_MSG_WARN([ + --enable-threads requested, but building against a Tcl that is NOT + thread-enabled. This is an OK configuration that will also run in + a thread-enabled core.]) + fi + ;; + esac + AC_SUBST(TCL_THREADS) +]) + +#------------------------------------------------------------------------ +# TEA_ENABLE_SYMBOLS -- +# +# Specify if debugging symbols should be used. +# Memory (TCL_MEM_DEBUG) debugging can also be enabled. +# +# Arguments: +# none +# +# TEA varies from core Tcl in that C|LDFLAGS_DEFAULT receives +# the value of C|LDFLAGS_OPTIMIZE|DEBUG already substituted. +# Requires the following vars to be set in the Makefile: +# CFLAGS_DEFAULT +# LDFLAGS_DEFAULT +# +# Results: +# +# Adds the following arguments to configure: +# --enable-symbols +# +# Defines the following vars: +# CFLAGS_DEFAULT Sets to $(CFLAGS_DEBUG) if true +# Sets to "$(CFLAGS_OPTIMIZE) -DNDEBUG" if false +# LDFLAGS_DEFAULT Sets to $(LDFLAGS_DEBUG) if true +# Sets to $(LDFLAGS_OPTIMIZE) if false +# DBGX Formerly used as debug library extension; +# always blank now. +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_ENABLE_SYMBOLS], [ + dnl TEA specific: Make sure we are initialized + AC_REQUIRE([TEA_CONFIG_CFLAGS]) + AC_MSG_CHECKING([for build with symbols]) + AC_ARG_ENABLE(symbols, + AC_HELP_STRING([--enable-symbols], + [build with debugging symbols (default: off)]), + [tcl_ok=$enableval], [tcl_ok=no]) + DBGX="" + if test "$tcl_ok" = "no"; then + CFLAGS_DEFAULT="${CFLAGS_OPTIMIZE} -DNDEBUG" + LDFLAGS_DEFAULT="${LDFLAGS_OPTIMIZE}" + AC_MSG_RESULT([no]) + else + CFLAGS_DEFAULT="${CFLAGS_DEBUG}" + LDFLAGS_DEFAULT="${LDFLAGS_DEBUG}" + if test "$tcl_ok" = "yes"; then + AC_MSG_RESULT([yes (standard debugging)]) + fi + fi + # TEA specific: + if test "${TEA_PLATFORM}" != "windows" ; then + LDFLAGS_DEFAULT="${LDFLAGS}" + fi + AC_SUBST(CFLAGS_DEFAULT) + AC_SUBST(LDFLAGS_DEFAULT) + AC_SUBST(TCL_DBGX) + + if test "$tcl_ok" = "mem" -o "$tcl_ok" = "all"; then + AC_DEFINE(TCL_MEM_DEBUG, 1, [Is memory debugging enabled?]) + fi + + if test "$tcl_ok" != "yes" -a "$tcl_ok" != "no"; then + if test "$tcl_ok" = "all"; then + AC_MSG_RESULT([enabled symbols mem debugging]) + else + AC_MSG_RESULT([enabled $tcl_ok debugging]) + fi + fi +]) + +#------------------------------------------------------------------------ +# TEA_ENABLE_LANGINFO -- +# +# Allows use of modern nl_langinfo check for better l10n. +# This is only relevant for Unix. +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --enable-langinfo=yes|no (default is yes) +# +# Defines the following vars: +# HAVE_LANGINFO Triggers use of nl_langinfo if defined. +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_ENABLE_LANGINFO], [ + AC_ARG_ENABLE(langinfo, + AC_HELP_STRING([--enable-langinfo], + [use nl_langinfo if possible to determine encoding at startup, otherwise use old heuristic (default: on)]), + [langinfo_ok=$enableval], [langinfo_ok=yes]) + + HAVE_LANGINFO=0 + if test "$langinfo_ok" = "yes"; then + AC_CHECK_HEADER(langinfo.h,[langinfo_ok=yes],[langinfo_ok=no]) + fi + AC_MSG_CHECKING([whether to use nl_langinfo]) + if test "$langinfo_ok" = "yes"; then + AC_CACHE_VAL(tcl_cv_langinfo_h, [ + AC_TRY_COMPILE([#include ], [nl_langinfo(CODESET);], + [tcl_cv_langinfo_h=yes],[tcl_cv_langinfo_h=no])]) + AC_MSG_RESULT([$tcl_cv_langinfo_h]) + if test $tcl_cv_langinfo_h = yes; then + AC_DEFINE(HAVE_LANGINFO, 1, [Do we have nl_langinfo()?]) + fi + else + AC_MSG_RESULT([$langinfo_ok]) + fi +]) + +#-------------------------------------------------------------------- +# TEA_CONFIG_SYSTEM +# +# Determine what the system is (some things cannot be easily checked +# on a feature-driven basis, alas). This can usually be done via the +# "uname" command. +# +# Arguments: +# none +# +# Results: +# Defines the following var: +# +# system - System/platform/version identification code. +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_CONFIG_SYSTEM], [ + AC_CACHE_CHECK([system version], tcl_cv_sys_version, [ + # TEA specific: + if test "${TEA_PLATFORM}" = "windows" ; then + tcl_cv_sys_version=windows + else + tcl_cv_sys_version=`uname -s`-`uname -r` + if test "$?" -ne 0 ; then + AC_MSG_WARN([can't find uname command]) + tcl_cv_sys_version=unknown + else + if test "`uname -s`" = "AIX" ; then + tcl_cv_sys_version=AIX-`uname -v`.`uname -r` + fi + fi + fi + ]) + system=$tcl_cv_sys_version +]) + +#-------------------------------------------------------------------- +# TEA_CONFIG_CFLAGS +# +# Try to determine the proper flags to pass to the compiler +# for building shared libraries and other such nonsense. +# +# Arguments: +# none +# +# Results: +# +# Defines and substitutes the following vars: +# +# DL_OBJS, DL_LIBS - removed for TEA, only needed by core. +# LDFLAGS - Flags to pass to the compiler when linking object +# files into an executable application binary such +# as tclsh. +# LD_SEARCH_FLAGS-Flags to pass to ld, such as "-R /usr/local/tcl/lib", +# that tell the run-time dynamic linker where to look +# for shared libraries such as libtcl.so. Depends on +# the variable LIB_RUNTIME_DIR in the Makefile. Could +# be the same as CC_SEARCH_FLAGS if ${CC} is used to link. +# CC_SEARCH_FLAGS-Flags to pass to ${CC}, such as "-Wl,-rpath,/usr/local/tcl/lib", +# that tell the run-time dynamic linker where to look +# for shared libraries such as libtcl.so. Depends on +# the variable LIB_RUNTIME_DIR in the Makefile. +# SHLIB_CFLAGS - Flags to pass to cc when compiling the components +# of a shared library (may request position-independent +# code, among other things). +# SHLIB_LD - Base command to use for combining object files +# into a shared library. +# SHLIB_LD_LIBS - Dependent libraries for the linker to scan when +# creating shared libraries. This symbol typically +# goes at the end of the "ld" commands that build +# shared libraries. The value of the symbol defaults to +# "${LIBS}" if all of the dependent libraries should +# be specified when creating a shared library. If +# dependent libraries should not be specified (as on +# SunOS 4.x, where they cause the link to fail, or in +# general if Tcl and Tk aren't themselves shared +# libraries), then this symbol has an empty string +# as its value. +# SHLIB_SUFFIX - Suffix to use for the names of dynamically loadable +# extensions. An empty string means we don't know how +# to use shared libraries on this platform. +# LIB_SUFFIX - Specifies everything that comes after the "libfoo" +# in a static or shared library name, using the $PACKAGE_VERSION variable +# to put the version in the right place. This is used +# by platforms that need non-standard library names. +# Examples: ${PACKAGE_VERSION}.so.1.1 on NetBSD, since it needs +# to have a version after the .so, and ${PACKAGE_VERSION}.a +# on AIX, since a shared library needs to have +# a .a extension whereas shared objects for loadable +# extensions have a .so extension. Defaults to +# ${PACKAGE_VERSION}${SHLIB_SUFFIX}. +# CFLAGS_DEBUG - +# Flags used when running the compiler in debug mode +# CFLAGS_OPTIMIZE - +# Flags used when running the compiler in optimize mode +# CFLAGS - Additional CFLAGS added as necessary (usually 64-bit) +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_CONFIG_CFLAGS], [ + dnl TEA specific: Make sure we are initialized + AC_REQUIRE([TEA_INIT]) + + # Step 0.a: Enable 64 bit support? + + AC_MSG_CHECKING([if 64bit support is requested]) + AC_ARG_ENABLE(64bit, + AC_HELP_STRING([--enable-64bit], + [enable 64bit support (default: off)]), + [do64bit=$enableval], [do64bit=no]) + AC_MSG_RESULT([$do64bit]) + + # Step 0.b: Enable Solaris 64 bit VIS support? + + AC_MSG_CHECKING([if 64bit Sparc VIS support is requested]) + AC_ARG_ENABLE(64bit-vis, + AC_HELP_STRING([--enable-64bit-vis], + [enable 64bit Sparc VIS support (default: off)]), + [do64bitVIS=$enableval], [do64bitVIS=no]) + AC_MSG_RESULT([$do64bitVIS]) + # Force 64bit on with VIS + AS_IF([test "$do64bitVIS" = "yes"], [do64bit=yes]) + + # Step 0.c: Check if visibility support is available. Do this here so + # that platform specific alternatives can be used below if this fails. + + AC_CACHE_CHECK([if compiler supports visibility "hidden"], + tcl_cv_cc_visibility_hidden, [ + hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -Werror" + AC_TRY_LINK([ + extern __attribute__((__visibility__("hidden"))) void f(void); + void f(void) {}], [f();], tcl_cv_cc_visibility_hidden=yes, + tcl_cv_cc_visibility_hidden=no) + CFLAGS=$hold_cflags]) + AS_IF([test $tcl_cv_cc_visibility_hidden = yes], [ + AC_DEFINE(MODULE_SCOPE, + [extern __attribute__((__visibility__("hidden")))], + [Compiler support for module scope symbols]) + AC_DEFINE(HAVE_HIDDEN, [1], [Compiler support for module scope symbols]) + ]) + + # Step 0.d: Disable -rpath support? + + AC_MSG_CHECKING([if rpath support is requested]) + AC_ARG_ENABLE(rpath, + AC_HELP_STRING([--disable-rpath], + [disable rpath support (default: on)]), + [doRpath=$enableval], [doRpath=yes]) + AC_MSG_RESULT([$doRpath]) + + # TEA specific: Cross-compiling options for Windows/CE builds? + + AS_IF([test "${TEA_PLATFORM}" = windows], [ + AC_MSG_CHECKING([if Windows/CE build is requested]) + AC_ARG_ENABLE(wince, + AC_HELP_STRING([--enable-wince], + [enable Win/CE support (where applicable)]), + [doWince=$enableval], [doWince=no]) + AC_MSG_RESULT([$doWince]) + ]) + + # Set the variable "system" to hold the name and version number + # for the system. + + TEA_CONFIG_SYSTEM + + # Require ranlib early so we can override it in special cases below. + + AC_REQUIRE([AC_PROG_RANLIB]) + + # Set configuration options based on system name and version. + # This is similar to Tcl's unix/tcl.m4 except that we've added a + # "windows" case and removed some core-only vars. + + do64bit_ok=no + # default to '{$LIBS}' and set to "" on per-platform necessary basis + SHLIB_LD_LIBS='${LIBS}' + # When ld needs options to work in 64-bit mode, put them in + # LDFLAGS_ARCH so they eventually end up in LDFLAGS even if [load] + # is disabled by the user. [Bug 1016796] + LDFLAGS_ARCH="" + UNSHARED_LIB_SUFFIX="" + # TEA specific: use PACKAGE_VERSION instead of VERSION + TCL_TRIM_DOTS='`echo ${PACKAGE_VERSION} | tr -d .`' + ECHO_VERSION='`echo ${PACKAGE_VERSION}`' + TCL_LIB_VERSIONS_OK=ok + CFLAGS_DEBUG=-g + AS_IF([test "$GCC" = yes], [ + CFLAGS_OPTIMIZE=-O2 + CFLAGS_WARNING="-Wall" + ], [ + CFLAGS_OPTIMIZE=-O + CFLAGS_WARNING="" + ]) + AC_CHECK_TOOL(AR, ar) + STLIB_LD='${AR} cr' + LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH" + AS_IF([test "x$SHLIB_VERSION" = x],[SHLIB_VERSION="1.0"]) + case $system in + # TEA specific: + windows) + # This is a 2-stage check to make sure we have the 64-bit SDK + # We have to know where the SDK is installed. + # This magic is based on MS Platform SDK for Win2003 SP1 - hobbs + # MACHINE is IX86 for LINK, but this is used by the manifest, + # which requires x86|amd64|ia64. + MACHINE="X86" + if test "$do64bit" != "no" ; then + if test "x${MSSDK}x" = "xx" ; then + MSSDK="C:/Progra~1/Microsoft Platform SDK" + fi + MSSDK=`echo "$MSSDK" | sed -e 's!\\\!/!g'` + PATH64="" + case "$do64bit" in + amd64|x64|yes) + MACHINE="AMD64" ; # default to AMD64 64-bit build + PATH64="${MSSDK}/Bin/Win64/x86/AMD64" + ;; + ia64) + MACHINE="IA64" + PATH64="${MSSDK}/Bin/Win64" + ;; + esac + if test "$GCC" != "yes" -a ! -d "${PATH64}" ; then + AC_MSG_WARN([Could not find 64-bit $MACHINE SDK to enable 64bit mode]) + AC_MSG_WARN([Ensure latest Platform SDK is installed]) + do64bit="no" + else + AC_MSG_RESULT([ Using 64-bit $MACHINE mode]) + do64bit_ok="yes" + fi + fi + + if test "$doWince" != "no" ; then + if test "$do64bit" != "no" ; then + AC_MSG_ERROR([Windows/CE and 64-bit builds incompatible]) + fi + if test "$GCC" = "yes" ; then + AC_MSG_ERROR([Windows/CE and GCC builds incompatible]) + fi + TEA_PATH_CELIB + # Set defaults for common evc4/PPC2003 setup + # Currently Tcl requires 300+, possibly 420+ for sockets + CEVERSION=420; # could be 211 300 301 400 420 ... + TARGETCPU=ARMV4; # could be ARMV4 ARM MIPS SH3 X86 ... + ARCH=ARM; # could be ARM MIPS X86EM ... + PLATFORM="Pocket PC 2003"; # or "Pocket PC 2002" + if test "$doWince" != "yes"; then + # If !yes then the user specified something + # Reset ARCH to allow user to skip specifying it + ARCH= + eval `echo $doWince | awk -F, '{ \ + if (length([$]1)) { printf "CEVERSION=\"%s\"\n", [$]1; \ + if ([$]1 < 400) { printf "PLATFORM=\"Pocket PC 2002\"\n" } }; \ + if (length([$]2)) { printf "TARGETCPU=\"%s\"\n", toupper([$]2) }; \ + if (length([$]3)) { printf "ARCH=\"%s\"\n", toupper([$]3) }; \ + if (length([$]4)) { printf "PLATFORM=\"%s\"\n", [$]4 }; \ + }'` + if test "x${ARCH}" = "x" ; then + ARCH=$TARGETCPU; + fi + fi + OSVERSION=WCE$CEVERSION; + if test "x${WCEROOT}" = "x" ; then + WCEROOT="C:/Program Files/Microsoft eMbedded C++ 4.0" + if test ! -d "${WCEROOT}" ; then + WCEROOT="C:/Program Files/Microsoft eMbedded Tools" + fi + fi + if test "x${SDKROOT}" = "x" ; then + SDKROOT="C:/Program Files/Windows CE Tools" + if test ! -d "${SDKROOT}" ; then + SDKROOT="C:/Windows CE Tools" + fi + fi + WCEROOT=`echo "$WCEROOT" | sed -e 's!\\\!/!g'` + SDKROOT=`echo "$SDKROOT" | sed -e 's!\\\!/!g'` + if test ! -d "${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" \ + -o ! -d "${WCEROOT}/EVC/${OSVERSION}/bin"; then + AC_MSG_ERROR([could not find PocketPC SDK or target compiler to enable WinCE mode [$CEVERSION,$TARGETCPU,$ARCH,$PLATFORM]]) + doWince="no" + else + # We could PATH_NOSPACE these, but that's not important, + # as long as we quote them when used. + CEINCLUDE="${SDKROOT}/${OSVERSION}/${PLATFORM}/include" + if test -d "${CEINCLUDE}/${TARGETCPU}" ; then + CEINCLUDE="${CEINCLUDE}/${TARGETCPU}" + fi + CELIBPATH="${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" + fi + fi + + if test "$GCC" != "yes" ; then + if test "${SHARED_BUILD}" = "0" ; then + runtime=-MT + else + runtime=-MD + fi + + if test "$do64bit" != "no" ; then + # All this magic is necessary for the Win64 SDK RC1 - hobbs + CC="\"${PATH64}/cl.exe\"" + CFLAGS="${CFLAGS} -I\"${MSSDK}/Include\" -I\"${MSSDK}/Include/crt\" -I\"${MSSDK}/Include/crt/sys\"" + RC="\"${MSSDK}/bin/rc.exe\"" + lflags="-nologo -MACHINE:${MACHINE} -LIBPATH:\"${MSSDK}/Lib/${MACHINE}\"" + LINKBIN="\"${PATH64}/link.exe\"" + CFLAGS_DEBUG="-nologo -Zi -Od -W3 ${runtime}d" + CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}" + # Avoid 'unresolved external symbol __security_cookie' + # errors, c.f. http://support.microsoft.com/?id=894573 + TEA_ADD_LIBS([bufferoverflowU.lib]) + elif test "$doWince" != "no" ; then + CEBINROOT="${WCEROOT}/EVC/${OSVERSION}/bin" + if test "${TARGETCPU}" = "X86"; then + CC="\"${CEBINROOT}/cl.exe\"" + else + CC="\"${CEBINROOT}/cl${ARCH}.exe\"" + fi + CFLAGS="$CFLAGS -I\"${CELIB_DIR}/inc\" -I\"${CEINCLUDE}\"" + RC="\"${WCEROOT}/Common/EVC/bin/rc.exe\"" + arch=`echo ${ARCH} | awk '{print tolower([$]0)}'` + defs="${ARCH} _${ARCH}_ ${arch} PALM_SIZE _MT _WINDOWS" + if test "${SHARED_BUILD}" = "1" ; then + # Static CE builds require static celib as well + defs="${defs} _DLL" + fi + for i in $defs ; do + AC_DEFINE_UNQUOTED($i, 1, [WinCE def ]$i) + done + AC_DEFINE_UNQUOTED(_WIN32_WCE, $CEVERSION, [_WIN32_WCE version]) + AC_DEFINE_UNQUOTED(UNDER_CE, $CEVERSION, [UNDER_CE version]) + CFLAGS_DEBUG="-nologo -Zi -Od" + CFLAGS_OPTIMIZE="-nologo -Ox" + lversion=`echo ${CEVERSION} | sed -e 's/\(.\)\(..\)/\1\.\2/'` + lflags="-MACHINE:${ARCH} -LIBPATH:\"${CELIBPATH}\" -subsystem:windowsce,${lversion} -nologo" + LINKBIN="\"${CEBINROOT}/link.exe\"" + AC_SUBST(CELIB_DIR) + else + RC="rc" + lflags="-nologo" + LINKBIN="link" + CFLAGS_DEBUG="-nologo -Z7 -Od -W3 -WX ${runtime}d" + CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}" + fi + fi + + if test "$GCC" = "yes"; then + # mingw gcc mode + AC_CHECK_TOOL(RC, windres) + CFLAGS_DEBUG="-g" + CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer" + SHLIB_LD='${CC} -shared' + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' + LDFLAGS_CONSOLE="-wl,--subsystem,console ${lflags}" + LDFLAGS_WINDOW="-wl,--subsystem,windows ${lflags}" + + AC_CACHE_CHECK(for cross-compile version of gcc, + ac_cv_cross, + AC_TRY_COMPILE([ + #ifdef __WIN32__ + #error cross-compiler + #endif + ], [], + ac_cv_cross=yes, + ac_cv_cross=no) + ) + if test "$ac_cv_cross" = "yes"; then + case "$do64bit" in + amd64|x64|yes) + CC="x86_64-w64-mingw32-gcc" + LD="x86_64-w64-mingw32-ld" + AR="x86_64-w64-mingw32-ar" + RANLIB="x86_64-w64-mingw32-ranlib" + RC="x86_64-w64-mingw32-windres" + ;; + *) + CC="i686-w64-mingw32-gcc" + LD="i686-w64-mingw32-ld" + AR="i686-w64-mingw32-ar" + RANLIB="i686-w64-mingw32-ranlib" + RC="i686-w64-mingw32-windres" + ;; + esac + fi + + else + SHLIB_LD="${LINKBIN} -dll ${lflags}" + # link -lib only works when -lib is the first arg + STLIB_LD="${LINKBIN} -lib ${lflags}" + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.lib' + PATHTYPE=-w + # For information on what debugtype is most useful, see: + # http://msdn.microsoft.com/library/en-us/dnvc60/html/gendepdebug.asp + # and also + # http://msdn2.microsoft.com/en-us/library/y0zzbyt4%28VS.80%29.aspx + # This essentially turns it all on. + LDFLAGS_DEBUG="-debug -debugtype:cv" + LDFLAGS_OPTIMIZE="-release" + if test "$doWince" != "no" ; then + LDFLAGS_CONSOLE="-link ${lflags}" + LDFLAGS_WINDOW=${LDFLAGS_CONSOLE} + else + LDFLAGS_CONSOLE="-link -subsystem:console ${lflags}" + LDFLAGS_WINDOW="-link -subsystem:windows ${lflags}" + fi + fi + + SHLIB_SUFFIX=".dll" + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.dll' + + TCL_LIB_VERSIONS_OK=nodots + ;; + AIX-*) + AS_IF([test "${TCL_THREADS}" = "1" -a "$GCC" != "yes"], [ + # AIX requires the _r compiler when gcc isn't being used + case "${CC}" in + *_r|*_r\ *) + # ok ... + ;; + *) + # Make sure only first arg gets _r + CC=`echo "$CC" | sed -e 's/^\([[^ ]]*\)/\1_r/'` + ;; + esac + AC_MSG_RESULT([Using $CC for compiling with threads]) + ]) + LIBS="$LIBS -lc" + SHLIB_CFLAGS="" + SHLIB_SUFFIX=".so" + + LD_LIBRARY_PATH_VAR="LIBPATH" + + # Check to enable 64-bit flags for compiler/linker + AS_IF([test "$do64bit" = yes], [ + AS_IF([test "$GCC" = yes], [ + AC_MSG_WARN([64bit mode not supported with GCC on $system]) + ], [ + do64bit_ok=yes + CFLAGS="$CFLAGS -q64" + LDFLAGS_ARCH="-q64" + RANLIB="${RANLIB} -X64" + AR="${AR} -X64" + SHLIB_LD_FLAGS="-b64" + ]) + ]) + + AS_IF([test "`uname -m`" = ia64], [ + # AIX-5 uses ELF style dynamic libraries on IA-64, but not PPC + SHLIB_LD="/usr/ccs/bin/ld -G -z text" + AS_IF([test "$GCC" = yes], [ + CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + ], [ + CC_SEARCH_FLAGS='-R${LIB_RUNTIME_DIR}' + ]) + LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' + ], [ + AS_IF([test "$GCC" = yes], [ + SHLIB_LD='${CC} -shared -Wl,-bexpall' + ], [ + SHLIB_LD="/bin/ld -bhalt:4 -bM:SRE -bexpall -H512 -T512 -bnoentry" + LDFLAGS="$LDFLAGS -brtl" + ]) + SHLIB_LD="${SHLIB_LD} ${SHLIB_LD_FLAGS}" + CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + ]) + ;; + BeOS*) + SHLIB_CFLAGS="-fPIC" + SHLIB_LD='${CC} -nostart' + SHLIB_SUFFIX=".so" + + #----------------------------------------------------------- + # Check for inet_ntoa in -lbind, for BeOS (which also needs + # -lsocket, even if the network functions are in -lnet which + # is always linked to, for compatibility. + #----------------------------------------------------------- + AC_CHECK_LIB(bind, inet_ntoa, [LIBS="$LIBS -lbind -lsocket"]) + ;; + BSD/OS-4.*) + SHLIB_CFLAGS="-export-dynamic -fPIC" + SHLIB_LD='${CC} -shared' + SHLIB_SUFFIX=".so" + LDFLAGS="$LDFLAGS -export-dynamic" + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + CYGWIN_*) + SHLIB_CFLAGS="" + SHLIB_LD='${CC} -shared' + SHLIB_SUFFIX=".dll" + EXEEXT=".exe" + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + Haiku*) + LDFLAGS="$LDFLAGS -Wl,--export-dynamic" + SHLIB_CFLAGS="-fPIC" + SHLIB_SUFFIX=".so" + SHLIB_LD='${CC} -shared ${CFLAGS} ${LDFLAGS}' + AC_CHECK_LIB(network, inet_ntoa, [LIBS="$LIBS -lnetwork"]) + ;; + HP-UX-*.11.*) + # Use updated header definitions where possible + AC_DEFINE(_XOPEN_SOURCE_EXTENDED, 1, [Do we want to use the XOPEN network library?]) + # TEA specific: Needed by Tcl, but not most extensions + #AC_DEFINE(_XOPEN_SOURCE, 1, [Do we want to use the XOPEN network library?]) + #LIBS="$LIBS -lxnet" # Use the XOPEN network library + + AS_IF([test "`uname -m`" = ia64], [ + SHLIB_SUFFIX=".so" + # Use newer C++ library for C++ extensions + #if test "$GCC" != "yes" ; then + # CPPFLAGS="-AA" + #fi + ], [ + SHLIB_SUFFIX=".sl" + ]) + AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no) + AS_IF([test "$tcl_ok" = yes], [ + LDFLAGS="$LDFLAGS -Wl,-E" + CC_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.' + LD_SEARCH_FLAGS='+s +b ${LIB_RUNTIME_DIR}:.' + LD_LIBRARY_PATH_VAR="SHLIB_PATH" + ]) + AS_IF([test "$GCC" = yes], [ + SHLIB_LD='${CC} -shared' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + ], [ + CFLAGS="$CFLAGS -z" + # Users may want PA-RISC 1.1/2.0 portable code - needs HP cc + #CFLAGS="$CFLAGS +DAportable" + SHLIB_CFLAGS="+z" + SHLIB_LD="ld -b" + ]) + + # Check to enable 64-bit flags for compiler/linker + AS_IF([test "$do64bit" = "yes"], [ + AS_IF([test "$GCC" = yes], [ + case `${CC} -dumpmachine` in + hppa64*) + # 64-bit gcc in use. Fix flags for GNU ld. + do64bit_ok=yes + SHLIB_LD='${CC} -shared' + AS_IF([test $doRpath = yes], [ + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + ;; + *) + AC_MSG_WARN([64bit mode not supported with GCC on $system]) + ;; + esac + ], [ + do64bit_ok=yes + CFLAGS="$CFLAGS +DD64" + LDFLAGS_ARCH="+DD64" + ]) + ]) ;; + IRIX-6.*) + SHLIB_CFLAGS="" + SHLIB_LD="ld -n32 -shared -rdata_shared" + SHLIB_SUFFIX=".so" + AS_IF([test $doRpath = yes], [ + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}']) + AS_IF([test "$GCC" = yes], [ + CFLAGS="$CFLAGS -mabi=n32" + LDFLAGS="$LDFLAGS -mabi=n32" + ], [ + case $system in + IRIX-6.3) + # Use to build 6.2 compatible binaries on 6.3. + CFLAGS="$CFLAGS -n32 -D_OLD_TERMIOS" + ;; + *) + CFLAGS="$CFLAGS -n32" + ;; + esac + LDFLAGS="$LDFLAGS -n32" + ]) + ;; + IRIX64-6.*) + SHLIB_CFLAGS="" + SHLIB_LD="ld -n32 -shared -rdata_shared" + SHLIB_SUFFIX=".so" + AS_IF([test $doRpath = yes], [ + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}']) + + # Check to enable 64-bit flags for compiler/linker + + AS_IF([test "$do64bit" = yes], [ + AS_IF([test "$GCC" = yes], [ + AC_MSG_WARN([64bit mode not supported by gcc]) + ], [ + do64bit_ok=yes + SHLIB_LD="ld -64 -shared -rdata_shared" + CFLAGS="$CFLAGS -64" + LDFLAGS_ARCH="-64" + ]) + ]) + ;; + Linux*|GNU*|NetBSD-Debian) + SHLIB_CFLAGS="-fPIC" + SHLIB_SUFFIX=".so" + + # TEA specific: + CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer" + + # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS + SHLIB_LD='${CC} -shared ${CFLAGS} ${LDFLAGS_DEFAULT}' + LDFLAGS="$LDFLAGS -Wl,--export-dynamic" + AS_IF([test $doRpath = yes], [ + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + AS_IF([test "`uname -m`" = "alpha"], [CFLAGS="$CFLAGS -mieee"]) + AS_IF([test $do64bit = yes], [ + AC_CACHE_CHECK([if compiler accepts -m64 flag], tcl_cv_cc_m64, [ + hold_cflags=$CFLAGS + CFLAGS="$CFLAGS -m64" + AC_TRY_LINK(,, tcl_cv_cc_m64=yes, tcl_cv_cc_m64=no) + CFLAGS=$hold_cflags]) + AS_IF([test $tcl_cv_cc_m64 = yes], [ + CFLAGS="$CFLAGS -m64" + do64bit_ok=yes + ]) + ]) + + # The combo of gcc + glibc has a bug related to inlining of + # functions like strtod(). The -fno-builtin flag should address + # this problem but it does not work. The -fno-inline flag is kind + # of overkill but it works. Disable inlining only when one of the + # files in compat/*.c is being linked in. + + AS_IF([test x"${USE_COMPAT}" != x],[CFLAGS="$CFLAGS -fno-inline"]) + ;; + Lynx*) + SHLIB_CFLAGS="-fPIC" + SHLIB_SUFFIX=".so" + CFLAGS_OPTIMIZE=-02 + SHLIB_LD='${CC} -shared' + LD_FLAGS="-Wl,--export-dynamic" + AS_IF([test $doRpath = yes], [ + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) + ;; + OpenBSD-*) + arch=`arch -s` + case "$arch" in + vax) + SHLIB_SUFFIX="" + SHARED_LIB_SUFFIX="" + LDFLAGS="" + ;; + *) + SHLIB_CFLAGS="-fPIC" + SHLIB_LD='${CC} -shared ${SHLIB_CFLAGS}' + SHLIB_SUFFIX=".so" + AS_IF([test $doRpath = yes], [ + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so.${SHLIB_VERSION}' + LDFLAGS="-Wl,-export-dynamic" + ;; + esac + case "$arch" in + vax) + CFLAGS_OPTIMIZE="-O1" + ;; + *) + CFLAGS_OPTIMIZE="-O2" + ;; + esac + AS_IF([test "${TCL_THREADS}" = "1"], [ + # On OpenBSD: Compile with -pthread + # Don't link with -lpthread + LIBS=`echo $LIBS | sed s/-lpthread//` + CFLAGS="$CFLAGS -pthread" + ]) + # OpenBSD doesn't do version numbers with dots. + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' + TCL_LIB_VERSIONS_OK=nodots + ;; + NetBSD-*) + # NetBSD has ELF and can use 'cc -shared' to build shared libs + SHLIB_CFLAGS="-fPIC" + SHLIB_LD='${CC} -shared ${SHLIB_CFLAGS}' + SHLIB_SUFFIX=".so" + LDFLAGS="$LDFLAGS -export-dynamic" + AS_IF([test $doRpath = yes], [ + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + AS_IF([test "${TCL_THREADS}" = "1"], [ + # The -pthread needs to go in the CFLAGS, not LIBS + LIBS=`echo $LIBS | sed s/-pthread//` + CFLAGS="$CFLAGS -pthread" + LDFLAGS="$LDFLAGS -pthread" + ]) + ;; + FreeBSD-*) + # This configuration from FreeBSD Ports. + SHLIB_CFLAGS="-fPIC" + SHLIB_LD="${CC} -shared" + TCL_SHLIB_LD_EXTRAS="-Wl,-soname=\$[@]" + SHLIB_SUFFIX=".so" + LDFLAGS="" + AS_IF([test $doRpath = yes], [ + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) + AS_IF([test "${TCL_THREADS}" = "1"], [ + # The -pthread needs to go in the LDFLAGS, not LIBS + LIBS=`echo $LIBS | sed s/-pthread//` + CFLAGS="$CFLAGS $PTHREAD_CFLAGS" + LDFLAGS="$LDFLAGS $PTHREAD_LIBS"]) + # Version numbers are dot-stripped by system policy. + TCL_TRIM_DOTS=`echo ${PACKAGE_VERSION} | tr -d .` + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1' + TCL_LIB_VERSIONS_OK=nodots + ;; + Darwin-*) + CFLAGS_OPTIMIZE="-Os" + SHLIB_CFLAGS="-fno-common" + # To avoid discrepancies between what headers configure sees during + # preprocessing tests and compiling tests, move any -isysroot and + # -mmacosx-version-min flags from CFLAGS to CPPFLAGS: + CPPFLAGS="${CPPFLAGS} `echo " ${CFLAGS}" | \ + awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \ + if ([$]i~/^(isysroot|mmacosx-version-min)/) print "-"[$]i}'`" + CFLAGS="`echo " ${CFLAGS}" | \ + awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \ + if (!([$]i~/^(isysroot|mmacosx-version-min)/)) print "-"[$]i}'`" + AS_IF([test $do64bit = yes], [ + case `arch` in + ppc) + AC_CACHE_CHECK([if compiler accepts -arch ppc64 flag], + tcl_cv_cc_arch_ppc64, [ + hold_cflags=$CFLAGS + CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5" + AC_TRY_LINK(,, tcl_cv_cc_arch_ppc64=yes, + tcl_cv_cc_arch_ppc64=no) + CFLAGS=$hold_cflags]) + AS_IF([test $tcl_cv_cc_arch_ppc64 = yes], [ + CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5" + do64bit_ok=yes + ]);; + i386) + AC_CACHE_CHECK([if compiler accepts -arch x86_64 flag], + tcl_cv_cc_arch_x86_64, [ + hold_cflags=$CFLAGS + CFLAGS="$CFLAGS -arch x86_64" + AC_TRY_LINK(,, tcl_cv_cc_arch_x86_64=yes, + tcl_cv_cc_arch_x86_64=no) + CFLAGS=$hold_cflags]) + AS_IF([test $tcl_cv_cc_arch_x86_64 = yes], [ + CFLAGS="$CFLAGS -arch x86_64" + do64bit_ok=yes + ]);; + *) + AC_MSG_WARN([Don't know how enable 64-bit on architecture `arch`]);; + esac + ], [ + # Check for combined 32-bit and 64-bit fat build + AS_IF([echo "$CFLAGS " |grep -E -q -- '-arch (ppc64|x86_64) ' \ + && echo "$CFLAGS " |grep -E -q -- '-arch (ppc|i386) '], [ + fat_32_64=yes]) + ]) + # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS + SHLIB_LD='${CC} -dynamiclib ${CFLAGS} ${LDFLAGS_DEFAULT}' + AC_CACHE_CHECK([if ld accepts -single_module flag], tcl_cv_ld_single_module, [ + hold_ldflags=$LDFLAGS + LDFLAGS="$LDFLAGS -dynamiclib -Wl,-single_module" + AC_TRY_LINK(, [int i;], tcl_cv_ld_single_module=yes, tcl_cv_ld_single_module=no) + LDFLAGS=$hold_ldflags]) + AS_IF([test $tcl_cv_ld_single_module = yes], [ + SHLIB_LD="${SHLIB_LD} -Wl,-single_module" + ]) + # TEA specific: link shlib with current and compatibility version flags + vers=`echo ${PACKAGE_VERSION} | sed -e 's/^\([[0-9]]\{1,5\}\)\(\(\.[[0-9]]\{1,3\}\)\{0,2\}\).*$/\1\2/p' -e d` + SHLIB_LD="${SHLIB_LD} -current_version ${vers:-0} -compatibility_version ${vers:-0}" + SHLIB_SUFFIX=".dylib" + # Don't use -prebind when building for Mac OS X 10.4 or later only: + AS_IF([test "`echo "${MACOSX_DEPLOYMENT_TARGET}" | awk -F '10\\.' '{print int([$]2)}'`" -lt 4 -a \ + "`echo "${CPPFLAGS}" | awk -F '-mmacosx-version-min=10\\.' '{print int([$]2)}'`" -lt 4], [ + LDFLAGS="$LDFLAGS -prebind"]) + LDFLAGS="$LDFLAGS -headerpad_max_install_names" + AC_CACHE_CHECK([if ld accepts -search_paths_first flag], + tcl_cv_ld_search_paths_first, [ + hold_ldflags=$LDFLAGS + LDFLAGS="$LDFLAGS -Wl,-search_paths_first" + AC_TRY_LINK(, [int i;], tcl_cv_ld_search_paths_first=yes, + tcl_cv_ld_search_paths_first=no) + LDFLAGS=$hold_ldflags]) + AS_IF([test $tcl_cv_ld_search_paths_first = yes], [ + LDFLAGS="$LDFLAGS -Wl,-search_paths_first" + ]) + AS_IF([test "$tcl_cv_cc_visibility_hidden" != yes], [ + AC_DEFINE(MODULE_SCOPE, [__private_extern__], + [Compiler support for module scope symbols]) + tcl_cv_cc_visibility_hidden=yes + ]) + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + LD_LIBRARY_PATH_VAR="DYLD_LIBRARY_PATH" + # TEA specific: for combined 32 & 64 bit fat builds of Tk + # extensions, verify that 64-bit build is possible. + AS_IF([test "$fat_32_64" = yes && test -n "${TK_BIN_DIR}"], [ + AS_IF([test "${TEA_WINDOWINGSYSTEM}" = x11], [ + AC_CACHE_CHECK([for 64-bit X11], tcl_cv_lib_x11_64, [ + for v in CFLAGS CPPFLAGS LDFLAGS; do + eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc / /g" -e "s/-arch i386 / /g"`"' + done + CPPFLAGS="$CPPFLAGS -I/usr/X11R6/include" + LDFLAGS="$LDFLAGS -L/usr/X11R6/lib -lX11" + AC_TRY_LINK([#include ], [XrmInitialize();], + tcl_cv_lib_x11_64=yes, tcl_cv_lib_x11_64=no) + for v in CFLAGS CPPFLAGS LDFLAGS; do + eval $v'="$hold_'$v'"' + done]) + ]) + AS_IF([test "${TEA_WINDOWINGSYSTEM}" = aqua], [ + AC_CACHE_CHECK([for 64-bit Tk], tcl_cv_lib_tk_64, [ + for v in CFLAGS CPPFLAGS LDFLAGS; do + eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc / /g" -e "s/-arch i386 / /g"`"' + done + CPPFLAGS="$CPPFLAGS -DUSE_TCL_STUBS=1 -DUSE_TK_STUBS=1 ${TCL_INCLUDES} ${TK_INCLUDES}" + LDFLAGS="$LDFLAGS ${TCL_STUB_LIB_SPEC} ${TK_STUB_LIB_SPEC}" + AC_TRY_LINK([#include ], [Tk_InitStubs(NULL, "", 0);], + tcl_cv_lib_tk_64=yes, tcl_cv_lib_tk_64=no) + for v in CFLAGS CPPFLAGS LDFLAGS; do + eval $v'="$hold_'$v'"' + done]) + ]) + # remove 64-bit arch flags from CFLAGS et al. if configuration + # does not support 64-bit. + AS_IF([test "$tcl_cv_lib_tk_64" = no -o "$tcl_cv_lib_x11_64" = no], [ + AC_MSG_NOTICE([Removing 64-bit architectures from compiler & linker flags]) + for v in CFLAGS CPPFLAGS LDFLAGS; do + eval $v'="`echo "$'$v' "|sed -e "s/-arch ppc64 / /g" -e "s/-arch x86_64 / /g"`"' + done]) + ]) + ;; + OS/390-*) + CFLAGS_OPTIMIZE="" # Optimizer is buggy + AC_DEFINE(_OE_SOCKETS, 1, # needed in sys/socket.h + [Should OS/390 do the right thing with sockets?]) + ;; + OSF1-V*) + # Digital OSF/1 + SHLIB_CFLAGS="" + AS_IF([test "$SHARED_BUILD" = 1], [ + SHLIB_LD='ld -shared -expect_unresolved "*"' + ], [ + SHLIB_LD='ld -non_shared -expect_unresolved "*"' + ]) + SHLIB_SUFFIX=".so" + AS_IF([test $doRpath = yes], [ + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}']) + AS_IF([test "$GCC" = yes], [CFLAGS="$CFLAGS -mieee"], [ + CFLAGS="$CFLAGS -DHAVE_TZSET -std1 -ieee"]) + # see pthread_intro(3) for pthread support on osf1, k.furukawa + AS_IF([test "${TCL_THREADS}" = 1], [ + CFLAGS="$CFLAGS -DHAVE_PTHREAD_ATTR_SETSTACKSIZE" + CFLAGS="$CFLAGS -DTCL_THREAD_STACK_MIN=PTHREAD_STACK_MIN*64" + LIBS=`echo $LIBS | sed s/-lpthreads//` + AS_IF([test "$GCC" = yes], [ + LIBS="$LIBS -lpthread -lmach -lexc" + ], [ + CFLAGS="$CFLAGS -pthread" + LDFLAGS="$LDFLAGS -pthread" + ]) + ]) + ;; + QNX-6*) + # QNX RTP + # This may work for all QNX, but it was only reported for v6. + SHLIB_CFLAGS="-fPIC" + SHLIB_LD="ld -Bshareable -x" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + SCO_SV-3.2*) + AS_IF([test "$GCC" = yes], [ + SHLIB_CFLAGS="-fPIC -melf" + LDFLAGS="$LDFLAGS -melf -Wl,-Bexport" + ], [ + SHLIB_CFLAGS="-Kpic -belf" + LDFLAGS="$LDFLAGS -belf -Wl,-Bexport" + ]) + SHLIB_LD="ld -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + SunOS-5.[[0-6]]) + # Careful to not let 5.10+ fall into this case + + # Note: If _REENTRANT isn't defined, then Solaris + # won't define thread-safe library routines. + + AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?]) + AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1, + [Do we really want to follow the standard? Yes we do!]) + + SHLIB_CFLAGS="-KPIC" + SHLIB_SUFFIX=".so" + AS_IF([test "$GCC" = yes], [ + SHLIB_LD='${CC} -shared' + CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + ], [ + SHLIB_LD="/usr/ccs/bin/ld -G -z text" + CC_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + ]) + ;; + SunOS-5*) + # Note: If _REENTRANT isn't defined, then Solaris + # won't define thread-safe library routines. + + AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?]) + AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1, + [Do we really want to follow the standard? Yes we do!]) + + SHLIB_CFLAGS="-KPIC" + + # Check to enable 64-bit flags for compiler/linker + AS_IF([test "$do64bit" = yes], [ + arch=`isainfo` + AS_IF([test "$arch" = "sparcv9 sparc"], [ + AS_IF([test "$GCC" = yes], [ + AS_IF([test "`${CC} -dumpversion | awk -F. '{print [$]1}'`" -lt 3], [ + AC_MSG_WARN([64bit mode not supported with GCC < 3.2 on $system]) + ], [ + do64bit_ok=yes + CFLAGS="$CFLAGS -m64 -mcpu=v9" + LDFLAGS="$LDFLAGS -m64 -mcpu=v9" + SHLIB_CFLAGS="-fPIC" + ]) + ], [ + do64bit_ok=yes + AS_IF([test "$do64bitVIS" = yes], [ + CFLAGS="$CFLAGS -xarch=v9a" + LDFLAGS_ARCH="-xarch=v9a" + ], [ + CFLAGS="$CFLAGS -xarch=v9" + LDFLAGS_ARCH="-xarch=v9" + ]) + # Solaris 64 uses this as well + #LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH_64" + ]) + ], [AS_IF([test "$arch" = "amd64 i386"], [ + AS_IF([test "$GCC" = yes], [ + case $system in + SunOS-5.1[[1-9]]*|SunOS-5.[[2-9]][[0-9]]*) + do64bit_ok=yes + CFLAGS="$CFLAGS -m64" + LDFLAGS="$LDFLAGS -m64";; + *) + AC_MSG_WARN([64bit mode not supported with GCC on $system]);; + esac + ], [ + do64bit_ok=yes + case $system in + SunOS-5.1[[1-9]]*|SunOS-5.[[2-9]][[0-9]]*) + CFLAGS="$CFLAGS -m64" + LDFLAGS="$LDFLAGS -m64";; + *) + CFLAGS="$CFLAGS -xarch=amd64" + LDFLAGS="$LDFLAGS -xarch=amd64";; + esac + ]) + ], [AC_MSG_WARN([64bit mode not supported for $arch])])]) + ]) + + SHLIB_SUFFIX=".so" + AS_IF([test "$GCC" = yes], [ + SHLIB_LD='${CC} -shared' + CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + AS_IF([test "$do64bit_ok" = yes], [ + AS_IF([test "$arch" = "sparcv9 sparc"], [ + # We need to specify -static-libgcc or we need to + # add the path to the sparv9 libgcc. + # JH: static-libgcc is necessary for core Tcl, but may + # not be necessary for extensions. + SHLIB_LD="$SHLIB_LD -m64 -mcpu=v9 -static-libgcc" + # for finding sparcv9 libgcc, get the regular libgcc + # path, remove so name and append 'sparcv9' + #v9gcclibdir="`gcc -print-file-name=libgcc_s.so` | ..." + #CC_SEARCH_FLAGS="${CC_SEARCH_FLAGS},-R,$v9gcclibdir" + ], [AS_IF([test "$arch" = "amd64 i386"], [ + # JH: static-libgcc is necessary for core Tcl, but may + # not be necessary for extensions. + SHLIB_LD="$SHLIB_LD -m64 -static-libgcc" + ])]) + ]) + ], [ + case $system in + SunOS-5.[[1-9]][[0-9]]*) + # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS + SHLIB_LD='${CC} -G -z text ${LDFLAGS_DEFAULT}';; + *) + SHLIB_LD='/usr/ccs/bin/ld -G -z text';; + esac + CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' + ]) + ;; + UNIX_SV* | UnixWare-5*) + SHLIB_CFLAGS="-KPIC" + SHLIB_LD='${CC} -G' + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + # Some UNIX_SV* systems (unixware 1.1.2 for example) have linkers + # that don't grok the -Bexport option. Test that it does. + AC_CACHE_CHECK([for ld accepts -Bexport flag], tcl_cv_ld_Bexport, [ + hold_ldflags=$LDFLAGS + LDFLAGS="$LDFLAGS -Wl,-Bexport" + AC_TRY_LINK(, [int i;], tcl_cv_ld_Bexport=yes, tcl_cv_ld_Bexport=no) + LDFLAGS=$hold_ldflags]) + AS_IF([test $tcl_cv_ld_Bexport = yes], [ + LDFLAGS="$LDFLAGS -Wl,-Bexport" + ]) + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + esac + + AS_IF([test "$do64bit" = yes -a "$do64bit_ok" = no], [ + AC_MSG_WARN([64bit support being disabled -- don't know magic for this platform]) + ]) + +dnl # Add any CPPFLAGS set in the environment to our CFLAGS, but delay doing so +dnl # until the end of configure, as configure's compile and link tests use +dnl # both CPPFLAGS and CFLAGS (unlike our compile and link) but configure's +dnl # preprocessing tests use only CPPFLAGS. + AC_CONFIG_COMMANDS_PRE([CFLAGS="${CFLAGS} ${CPPFLAGS}"; CPPFLAGS=""]) + + # Add in the arch flags late to ensure it wasn't removed. + # Not necessary in TEA, but this is aligned with core + LDFLAGS="$LDFLAGS $LDFLAGS_ARCH" + + # If we're running gcc, then change the C flags for compiling shared + # libraries to the right flags for gcc, instead of those for the + # standard manufacturer compiler. + + AS_IF([test "$GCC" = yes], [ + case $system in + AIX-*) ;; + BSD/OS*) ;; + CYGWIN_*|MINGW32_*) ;; + IRIX*) ;; + NetBSD-*|FreeBSD-*|OpenBSD-*) ;; + Darwin-*) ;; + SCO_SV-3.2*) ;; + windows) ;; + *) SHLIB_CFLAGS="-fPIC" ;; + esac]) + + AS_IF([test "$tcl_cv_cc_visibility_hidden" != yes], [ + AC_DEFINE(MODULE_SCOPE, [extern], + [No Compiler support for module scope symbols]) + ]) + + AS_IF([test "$SHARED_LIB_SUFFIX" = ""], [ + # TEA specific: use PACKAGE_VERSION instead of VERSION + SHARED_LIB_SUFFIX='${PACKAGE_VERSION}${SHLIB_SUFFIX}']) + AS_IF([test "$UNSHARED_LIB_SUFFIX" = ""], [ + # TEA specific: use PACKAGE_VERSION instead of VERSION + UNSHARED_LIB_SUFFIX='${PACKAGE_VERSION}.a']) + + if test "${GCC}" = "yes" -a ${SHLIB_SUFFIX} = ".dll"; then + AC_CACHE_CHECK(for SEH support in compiler, + tcl_cv_seh, + AC_TRY_RUN([ +#define WIN32_LEAN_AND_MEAN +#include +#undef WIN32_LEAN_AND_MEAN + + int main(int argc, char** argv) { + int a, b = 0; + __try { + a = 666 / b; + } + __except (EXCEPTION_EXECUTE_HANDLER) { + return 0; + } + return 1; + } + ], + tcl_cv_seh=yes, + tcl_cv_seh=no, + tcl_cv_seh=no) + ) + if test "$tcl_cv_seh" = "no" ; then + AC_DEFINE(HAVE_NO_SEH, 1, + [Defined when mingw does not support SEH]) + fi + + # + # Check to see if the excpt.h include file provided contains the + # definition for EXCEPTION_DISPOSITION; if not, which is the case + # with Cygwin's version as of 2002-04-10, define it to be int, + # sufficient for getting the current code to work. + # + AC_CACHE_CHECK(for EXCEPTION_DISPOSITION support in include files, + tcl_cv_eh_disposition, + AC_TRY_COMPILE([ +# define WIN32_LEAN_AND_MEAN +# include +# undef WIN32_LEAN_AND_MEAN + ],[ + EXCEPTION_DISPOSITION x; + ], + tcl_cv_eh_disposition=yes, + tcl_cv_eh_disposition=no) + ) + if test "$tcl_cv_eh_disposition" = "no" ; then + AC_DEFINE(EXCEPTION_DISPOSITION, int, + [Defined when cygwin/mingw does not support EXCEPTION DISPOSITION]) + fi + + # Check to see if winnt.h defines CHAR, SHORT, and LONG + # even if VOID has already been #defined. The win32api + # used by mingw and cygwin is known to do this. + + AC_CACHE_CHECK(for winnt.h that ignores VOID define, + tcl_cv_winnt_ignore_void, + AC_TRY_COMPILE([ +#define VOID void +#define WIN32_LEAN_AND_MEAN +#include +#undef WIN32_LEAN_AND_MEAN + ], [ + CHAR c; + SHORT s; + LONG l; + ], + tcl_cv_winnt_ignore_void=yes, + tcl_cv_winnt_ignore_void=no) + ) + if test "$tcl_cv_winnt_ignore_void" = "yes" ; then + AC_DEFINE(HAVE_WINNT_IGNORE_VOID, 1, + [Defined when cygwin/mingw ignores VOID define in winnt.h]) + fi + fi + + # See if the compiler supports casting to a union type. + # This is used to stop gcc from printing a compiler + # warning when initializing a union member. + + AC_CACHE_CHECK(for cast to union support, + tcl_cv_cast_to_union, + AC_TRY_COMPILE([], + [ + union foo { int i; double d; }; + union foo f = (union foo) (int) 0; + ], + tcl_cv_cast_to_union=yes, + tcl_cv_cast_to_union=no) + ) + if test "$tcl_cv_cast_to_union" = "yes"; then + AC_DEFINE(HAVE_CAST_TO_UNION, 1, + [Defined when compiler supports casting to union type.]) + fi + + AC_SUBST(CFLAGS_DEBUG) + AC_SUBST(CFLAGS_OPTIMIZE) + AC_SUBST(CFLAGS_WARNING) + + AC_SUBST(STLIB_LD) + AC_SUBST(SHLIB_LD) + + AC_SUBST(SHLIB_LD_LIBS) + AC_SUBST(SHLIB_CFLAGS) + + AC_SUBST(LD_LIBRARY_PATH_VAR) + + # These must be called after we do the basic CFLAGS checks and + # verify any possible 64-bit or similar switches are necessary + TEA_TCL_EARLY_FLAGS + TEA_TCL_64BIT_FLAGS +]) + +#-------------------------------------------------------------------- +# TEA_SERIAL_PORT +# +# Determine which interface to use to talk to the serial port. +# Note that #include lines must begin in leftmost column for +# some compilers to recognize them as preprocessor directives, +# and some build environments have stdin not pointing at a +# pseudo-terminal (usually /dev/null instead.) +# +# Arguments: +# none +# +# Results: +# +# Defines only one of the following vars: +# HAVE_SYS_MODEM_H +# USE_TERMIOS +# USE_TERMIO +# USE_SGTTY +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_SERIAL_PORT], [ + AC_CHECK_HEADERS(sys/modem.h) + AC_CACHE_CHECK([termios vs. termio vs. sgtty], tcl_cv_api_serial, [ + AC_TRY_RUN([ +#include + +int main() { + struct termios t; + if (tcgetattr(0, &t) == 0) { + cfsetospeed(&t, 0); + t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB; + return 0; + } + return 1; +}], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no) + if test $tcl_cv_api_serial = no ; then + AC_TRY_RUN([ +#include + +int main() { + struct termio t; + if (ioctl(0, TCGETA, &t) == 0) { + t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB; + return 0; + } + return 1; +}], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no) + fi + if test $tcl_cv_api_serial = no ; then + AC_TRY_RUN([ +#include + +int main() { + struct sgttyb t; + if (ioctl(0, TIOCGETP, &t) == 0) { + t.sg_ospeed = 0; + t.sg_flags |= ODDP | EVENP | RAW; + return 0; + } + return 1; +}], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=no, tcl_cv_api_serial=no) + fi + if test $tcl_cv_api_serial = no ; then + AC_TRY_RUN([ +#include +#include + +int main() { + struct termios t; + if (tcgetattr(0, &t) == 0 + || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { + cfsetospeed(&t, 0); + t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB; + return 0; + } + return 1; +}], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no) + fi + if test $tcl_cv_api_serial = no; then + AC_TRY_RUN([ +#include +#include + +int main() { + struct termio t; + if (ioctl(0, TCGETA, &t) == 0 + || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { + t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB; + return 0; + } + return 1; + }], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no) + fi + if test $tcl_cv_api_serial = no; then + AC_TRY_RUN([ +#include +#include + +int main() { + struct sgttyb t; + if (ioctl(0, TIOCGETP, &t) == 0 + || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { + t.sg_ospeed = 0; + t.sg_flags |= ODDP | EVENP | RAW; + return 0; + } + return 1; +}], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=none, tcl_cv_api_serial=none) + fi]) + case $tcl_cv_api_serial in + termios) AC_DEFINE(USE_TERMIOS, 1, [Use the termios API for serial lines]);; + termio) AC_DEFINE(USE_TERMIO, 1, [Use the termio API for serial lines]);; + sgtty) AC_DEFINE(USE_SGTTY, 1, [Use the sgtty API for serial lines]);; + esac +]) + +#-------------------------------------------------------------------- +# TEA_MISSING_POSIX_HEADERS +# +# Supply substitutes for missing POSIX header files. Special +# notes: +# - stdlib.h doesn't define strtol, strtoul, or +# strtod in some versions of SunOS +# - some versions of string.h don't declare procedures such +# as strstr +# +# Arguments: +# none +# +# Results: +# +# Defines some of the following vars: +# NO_DIRENT_H +# NO_ERRNO_H +# NO_VALUES_H +# HAVE_LIMITS_H or NO_LIMITS_H +# NO_STDLIB_H +# NO_STRING_H +# NO_SYS_WAIT_H +# NO_DLFCN_H +# HAVE_SYS_PARAM_H +# +# HAVE_STRING_H ? +# +# tkUnixPort.h checks for HAVE_LIMITS_H, so do both HAVE and +# CHECK on limits.h +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_MISSING_POSIX_HEADERS], [ + AC_CACHE_CHECK([dirent.h], tcl_cv_dirent_h, [ + AC_TRY_LINK([#include +#include ], [ +#ifndef _POSIX_SOURCE +# ifdef __Lynx__ + /* + * Generate compilation error to make the test fail: Lynx headers + * are only valid if really in the POSIX environment. + */ + + missing_procedure(); +# endif +#endif +DIR *d; +struct dirent *entryPtr; +char *p; +d = opendir("foobar"); +entryPtr = readdir(d); +p = entryPtr->d_name; +closedir(d); +], tcl_cv_dirent_h=yes, tcl_cv_dirent_h=no)]) + + if test $tcl_cv_dirent_h = no; then + AC_DEFINE(NO_DIRENT_H, 1, [Do we have ?]) + fi + + # TEA specific: + AC_CHECK_HEADER(errno.h, , [AC_DEFINE(NO_ERRNO_H, 1, [Do we have ?])]) + AC_CHECK_HEADER(float.h, , [AC_DEFINE(NO_FLOAT_H, 1, [Do we have ?])]) + AC_CHECK_HEADER(values.h, , [AC_DEFINE(NO_VALUES_H, 1, [Do we have ?])]) + AC_CHECK_HEADER(limits.h, + [AC_DEFINE(HAVE_LIMITS_H, 1, [Do we have ?])], + [AC_DEFINE(NO_LIMITS_H, 1, [Do we have ?])]) + AC_CHECK_HEADER(stdlib.h, tcl_ok=1, tcl_ok=0) + AC_EGREP_HEADER(strtol, stdlib.h, , tcl_ok=0) + AC_EGREP_HEADER(strtoul, stdlib.h, , tcl_ok=0) + AC_EGREP_HEADER(strtod, stdlib.h, , tcl_ok=0) + if test $tcl_ok = 0; then + AC_DEFINE(NO_STDLIB_H, 1, [Do we have ?]) + fi + AC_CHECK_HEADER(string.h, tcl_ok=1, tcl_ok=0) + AC_EGREP_HEADER(strstr, string.h, , tcl_ok=0) + AC_EGREP_HEADER(strerror, string.h, , tcl_ok=0) + + # See also memmove check below for a place where NO_STRING_H can be + # set and why. + + if test $tcl_ok = 0; then + AC_DEFINE(NO_STRING_H, 1, [Do we have ?]) + fi + + AC_CHECK_HEADER(sys/wait.h, , [AC_DEFINE(NO_SYS_WAIT_H, 1, [Do we have ?])]) + AC_CHECK_HEADER(dlfcn.h, , [AC_DEFINE(NO_DLFCN_H, 1, [Do we have ?])]) + + # OS/390 lacks sys/param.h (and doesn't need it, by chance). + AC_HAVE_HEADERS(sys/param.h) +]) + +#-------------------------------------------------------------------- +# TEA_PATH_X +# +# Locate the X11 header files and the X11 library archive. Try +# the ac_path_x macro first, but if it doesn't find the X stuff +# (e.g. because there's no xmkmf program) then check through +# a list of possible directories. Under some conditions the +# autoconf macro will return an include directory that contains +# no include files, so double-check its result just to be safe. +# +# This should be called after TEA_CONFIG_CFLAGS as setting the +# LIBS line can confuse some configure macro magic. +# +# Arguments: +# none +# +# Results: +# +# Sets the following vars: +# XINCLUDES +# XLIBSW +# PKG_LIBS (appends to) +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_PATH_X], [ + if test "${TEA_WINDOWINGSYSTEM}" = "x11" ; then + TEA_PATH_UNIX_X + fi +]) + +AC_DEFUN([TEA_PATH_UNIX_X], [ + AC_PATH_X + not_really_there="" + if test "$no_x" = ""; then + if test "$x_includes" = ""; then + AC_TRY_CPP([#include ], , not_really_there="yes") + else + if test ! -r $x_includes/X11/Xlib.h; then + not_really_there="yes" + fi + fi + fi + if test "$no_x" = "yes" -o "$not_really_there" = "yes"; then + AC_MSG_CHECKING([for X11 header files]) + found_xincludes="no" + AC_TRY_CPP([#include ], found_xincludes="yes", found_xincludes="no") + if test "$found_xincludes" = "no"; then + dirs="/usr/unsupported/include /usr/local/include /usr/X386/include /usr/X11R6/include /usr/X11R5/include /usr/include/X11R5 /usr/include/X11R4 /usr/openwin/include /usr/X11/include /usr/sww/include" + for i in $dirs ; do + if test -r $i/X11/Xlib.h; then + AC_MSG_RESULT([$i]) + XINCLUDES=" -I$i" + found_xincludes="yes" + break + fi + done + fi + else + if test "$x_includes" != ""; then + XINCLUDES="-I$x_includes" + found_xincludes="yes" + fi + fi + if test "$found_xincludes" = "no"; then + AC_MSG_RESULT([couldn't find any!]) + fi + + if test "$no_x" = yes; then + AC_MSG_CHECKING([for X11 libraries]) + XLIBSW=nope + dirs="/usr/unsupported/lib /usr/local/lib /usr/X386/lib /usr/X11R6/lib /usr/X11R5/lib /usr/lib/X11R5 /usr/lib/X11R4 /usr/openwin/lib /usr/X11/lib /usr/sww/X11/lib" + for i in $dirs ; do + if test -r $i/libX11.a -o -r $i/libX11.so -o -r $i/libX11.sl -o -r $i/libX11.dylib; then + AC_MSG_RESULT([$i]) + XLIBSW="-L$i -lX11" + x_libraries="$i" + break + fi + done + else + if test "$x_libraries" = ""; then + XLIBSW=-lX11 + else + XLIBSW="-L$x_libraries -lX11" + fi + fi + if test "$XLIBSW" = nope ; then + AC_CHECK_LIB(Xwindow, XCreateWindow, XLIBSW=-lXwindow) + fi + if test "$XLIBSW" = nope ; then + AC_MSG_RESULT([could not find any! Using -lX11.]) + XLIBSW=-lX11 + fi + # TEA specific: + if test x"${XLIBSW}" != x ; then + PKG_LIBS="${PKG_LIBS} ${XLIBSW}" + fi +]) + +#-------------------------------------------------------------------- +# TEA_BLOCKING_STYLE +# +# The statements below check for systems where POSIX-style +# non-blocking I/O (O_NONBLOCK) doesn't work or is unimplemented. +# On these systems (mostly older ones), use the old BSD-style +# FIONBIO approach instead. +# +# Arguments: +# none +# +# Results: +# +# Defines some of the following vars: +# HAVE_SYS_IOCTL_H +# HAVE_SYS_FILIO_H +# USE_FIONBIO +# O_NONBLOCK +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_BLOCKING_STYLE], [ + AC_CHECK_HEADERS(sys/ioctl.h) + AC_CHECK_HEADERS(sys/filio.h) + TEA_CONFIG_SYSTEM + AC_MSG_CHECKING([FIONBIO vs. O_NONBLOCK for nonblocking I/O]) + case $system in + OSF*) + AC_DEFINE(USE_FIONBIO, 1, [Should we use FIONBIO?]) + AC_MSG_RESULT([FIONBIO]) + ;; + *) + AC_MSG_RESULT([O_NONBLOCK]) + ;; + esac +]) + +#-------------------------------------------------------------------- +# TEA_TIME_HANDLER +# +# Checks how the system deals with time.h, what time structures +# are used on the system, and what fields the structures have. +# +# Arguments: +# none +# +# Results: +# +# Defines some of the following vars: +# USE_DELTA_FOR_TZ +# HAVE_TM_GMTOFF +# HAVE_TM_TZADJ +# HAVE_TIMEZONE_VAR +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_TIME_HANDLER], [ + AC_CHECK_HEADERS(sys/time.h) + AC_HEADER_TIME + AC_STRUCT_TIMEZONE + + AC_CHECK_FUNCS(gmtime_r localtime_r) + + AC_CACHE_CHECK([tm_tzadj in struct tm], tcl_cv_member_tm_tzadj, [ + AC_TRY_COMPILE([#include ], [struct tm tm; tm.tm_tzadj;], + tcl_cv_member_tm_tzadj=yes, tcl_cv_member_tm_tzadj=no)]) + if test $tcl_cv_member_tm_tzadj = yes ; then + AC_DEFINE(HAVE_TM_TZADJ, 1, [Should we use the tm_tzadj field of struct tm?]) + fi + + AC_CACHE_CHECK([tm_gmtoff in struct tm], tcl_cv_member_tm_gmtoff, [ + AC_TRY_COMPILE([#include ], [struct tm tm; tm.tm_gmtoff;], + tcl_cv_member_tm_gmtoff=yes, tcl_cv_member_tm_gmtoff=no)]) + if test $tcl_cv_member_tm_gmtoff = yes ; then + AC_DEFINE(HAVE_TM_GMTOFF, 1, [Should we use the tm_gmtoff field of struct tm?]) + fi + + # + # Its important to include time.h in this check, as some systems + # (like convex) have timezone functions, etc. + # + AC_CACHE_CHECK([long timezone variable], tcl_cv_timezone_long, [ + AC_TRY_COMPILE([#include ], + [extern long timezone; + timezone += 1; + exit (0);], + tcl_cv_timezone_long=yes, tcl_cv_timezone_long=no)]) + if test $tcl_cv_timezone_long = yes ; then + AC_DEFINE(HAVE_TIMEZONE_VAR, 1, [Should we use the global timezone variable?]) + else + # + # On some systems (eg IRIX 6.2), timezone is a time_t and not a long. + # + AC_CACHE_CHECK([time_t timezone variable], tcl_cv_timezone_time, [ + AC_TRY_COMPILE([#include ], + [extern time_t timezone; + timezone += 1; + exit (0);], + tcl_cv_timezone_time=yes, tcl_cv_timezone_time=no)]) + if test $tcl_cv_timezone_time = yes ; then + AC_DEFINE(HAVE_TIMEZONE_VAR, 1, [Should we use the global timezone variable?]) + fi + fi +]) + +#-------------------------------------------------------------------- +# TEA_BUGGY_STRTOD +# +# Under Solaris 2.4, strtod returns the wrong value for the +# terminating character under some conditions. Check for this +# and if the problem exists use a substitute procedure +# "fixstrtod" (provided by Tcl) that corrects the error. +# Also, on Compaq's Tru64 Unix 5.0, +# strtod(" ") returns 0.0 instead of a failure to convert. +# +# Arguments: +# none +# +# Results: +# +# Might defines some of the following vars: +# strtod (=fixstrtod) +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_BUGGY_STRTOD], [ + AC_CHECK_FUNC(strtod, tcl_strtod=1, tcl_strtod=0) + if test "$tcl_strtod" = 1; then + AC_CACHE_CHECK([for Solaris2.4/Tru64 strtod bugs], tcl_cv_strtod_buggy,[ + AC_TRY_RUN([ + extern double strtod(); + int main() { + char *infString="Inf", *nanString="NaN", *spaceString=" "; + char *term; + double value; + value = strtod(infString, &term); + if ((term != infString) && (term[-1] == 0)) { + exit(1); + } + value = strtod(nanString, &term); + if ((term != nanString) && (term[-1] == 0)) { + exit(1); + } + value = strtod(spaceString, &term); + if (term == (spaceString+1)) { + exit(1); + } + exit(0); + }], tcl_cv_strtod_buggy=ok, tcl_cv_strtod_buggy=buggy, + tcl_cv_strtod_buggy=buggy)]) + if test "$tcl_cv_strtod_buggy" = buggy; then + AC_LIBOBJ([fixstrtod]) + USE_COMPAT=1 + AC_DEFINE(strtod, fixstrtod, [Do we want to use the strtod() in compat?]) + fi + fi +]) + +#-------------------------------------------------------------------- +# TEA_TCL_LINK_LIBS +# +# Search for the libraries needed to link the Tcl shell. +# Things like the math library (-lm) and socket stuff (-lsocket vs. +# -lnsl) are dealt with here. +# +# Arguments: +# Requires the following vars to be set in the Makefile: +# DL_LIBS (not in TEA, only needed in core) +# LIBS +# MATH_LIBS +# +# Results: +# +# Substitutes the following vars: +# TCL_LIBS +# MATH_LIBS +# +# Might append to the following vars: +# LIBS +# +# Might define the following vars: +# HAVE_NET_ERRNO_H +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_TCL_LINK_LIBS], [ + #-------------------------------------------------------------------- + # On a few very rare systems, all of the libm.a stuff is + # already in libc.a. Set compiler flags accordingly. + # Also, Linux requires the "ieee" library for math to work + # right (and it must appear before "-lm"). + #-------------------------------------------------------------------- + + AC_CHECK_FUNC(sin, MATH_LIBS="", MATH_LIBS="-lm") + AC_CHECK_LIB(ieee, main, [MATH_LIBS="-lieee $MATH_LIBS"]) + + #-------------------------------------------------------------------- + # Interactive UNIX requires -linet instead of -lsocket, plus it + # needs net/errno.h to define the socket-related error codes. + #-------------------------------------------------------------------- + + AC_CHECK_LIB(inet, main, [LIBS="$LIBS -linet"]) + AC_CHECK_HEADER(net/errno.h, [ + AC_DEFINE(HAVE_NET_ERRNO_H, 1, [Do we have ?])]) + + #-------------------------------------------------------------------- + # Check for the existence of the -lsocket and -lnsl libraries. + # The order here is important, so that they end up in the right + # order in the command line generated by make. Here are some + # special considerations: + # 1. Use "connect" and "accept" to check for -lsocket, and + # "gethostbyname" to check for -lnsl. + # 2. Use each function name only once: can't redo a check because + # autoconf caches the results of the last check and won't redo it. + # 3. Use -lnsl and -lsocket only if they supply procedures that + # aren't already present in the normal libraries. This is because + # IRIX 5.2 has libraries, but they aren't needed and they're + # bogus: they goof up name resolution if used. + # 4. On some SVR4 systems, can't use -lsocket without -lnsl too. + # To get around this problem, check for both libraries together + # if -lsocket doesn't work by itself. + #-------------------------------------------------------------------- + + tcl_checkBoth=0 + AC_CHECK_FUNC(connect, tcl_checkSocket=0, tcl_checkSocket=1) + if test "$tcl_checkSocket" = 1; then + AC_CHECK_FUNC(setsockopt, , [AC_CHECK_LIB(socket, setsockopt, + LIBS="$LIBS -lsocket", tcl_checkBoth=1)]) + fi + if test "$tcl_checkBoth" = 1; then + tk_oldLibs=$LIBS + LIBS="$LIBS -lsocket -lnsl" + AC_CHECK_FUNC(accept, tcl_checkNsl=0, [LIBS=$tk_oldLibs]) + fi + AC_CHECK_FUNC(gethostbyname, , [AC_CHECK_LIB(nsl, gethostbyname, + [LIBS="$LIBS -lnsl"])]) + + # TEA specific: Don't perform the eval of the libraries here because + # DL_LIBS won't be set until we call TEA_CONFIG_CFLAGS + + TCL_LIBS='${DL_LIBS} ${LIBS} ${MATH_LIBS}' + AC_SUBST(TCL_LIBS) + AC_SUBST(MATH_LIBS) +]) + +#-------------------------------------------------------------------- +# TEA_TCL_EARLY_FLAGS +# +# Check for what flags are needed to be passed so the correct OS +# features are available. +# +# Arguments: +# None +# +# Results: +# +# Might define the following vars: +# _ISOC99_SOURCE +# _LARGEFILE64_SOURCE +# _LARGEFILE_SOURCE64 +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_TCL_EARLY_FLAG],[ + AC_CACHE_VAL([tcl_cv_flag_]translit($1,[A-Z],[a-z]), + AC_TRY_COMPILE([$2], $3, [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no, + AC_TRY_COMPILE([[#define ]$1[ 1 +]$2], $3, + [tcl_cv_flag_]translit($1,[A-Z],[a-z])=yes, + [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no))) + if test ["x${tcl_cv_flag_]translit($1,[A-Z],[a-z])[}" = "xyes"] ; then + AC_DEFINE($1, 1, [Add the ]$1[ flag when building]) + tcl_flags="$tcl_flags $1" + fi +]) + +AC_DEFUN([TEA_TCL_EARLY_FLAGS],[ + AC_MSG_CHECKING([for required early compiler flags]) + tcl_flags="" + TEA_TCL_EARLY_FLAG(_ISOC99_SOURCE,[#include ], + [char *p = (char *)strtoll; char *q = (char *)strtoull;]) + TEA_TCL_EARLY_FLAG(_LARGEFILE64_SOURCE,[#include ], + [struct stat64 buf; int i = stat64("/", &buf);]) + TEA_TCL_EARLY_FLAG(_LARGEFILE_SOURCE64,[#include ], + [char *p = (char *)open64;]) + if test "x${tcl_flags}" = "x" ; then + AC_MSG_RESULT([none]) + else + AC_MSG_RESULT([${tcl_flags}]) + fi +]) + +#-------------------------------------------------------------------- +# TEA_TCL_64BIT_FLAGS +# +# Check for what is defined in the way of 64-bit features. +# +# Arguments: +# None +# +# Results: +# +# Might define the following vars: +# TCL_WIDE_INT_IS_LONG +# TCL_WIDE_INT_TYPE +# HAVE_STRUCT_DIRENT64 +# HAVE_STRUCT_STAT64 +# HAVE_TYPE_OFF64_T +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_TCL_64BIT_FLAGS], [ + AC_MSG_CHECKING([for 64-bit integer type]) + AC_CACHE_VAL(tcl_cv_type_64bit,[ + tcl_cv_type_64bit=none + # See if the compiler knows natively about __int64 + AC_TRY_COMPILE(,[__int64 value = (__int64) 0;], + tcl_type_64bit=__int64, tcl_type_64bit="long long") + # See if we should use long anyway Note that we substitute in the + # type that is our current guess for a 64-bit type inside this check + # program, so it should be modified only carefully... + AC_TRY_COMPILE(,[switch (0) { + case 1: case (sizeof(]${tcl_type_64bit}[)==sizeof(long)): ; + }],tcl_cv_type_64bit=${tcl_type_64bit})]) + if test "${tcl_cv_type_64bit}" = none ; then + AC_DEFINE(TCL_WIDE_INT_IS_LONG, 1, [Are wide integers to be implemented with C 'long's?]) + AC_MSG_RESULT([using long]) + elif test "${tcl_cv_type_64bit}" = "__int64" \ + -a "${TEA_PLATFORM}" = "windows" ; then + # TEA specific: We actually want to use the default tcl.h checks in + # this case to handle both TCL_WIDE_INT_TYPE and TCL_LL_MODIFIER* + AC_MSG_RESULT([using Tcl header defaults]) + else + AC_DEFINE_UNQUOTED(TCL_WIDE_INT_TYPE,${tcl_cv_type_64bit}, + [What type should be used to define wide integers?]) + AC_MSG_RESULT([${tcl_cv_type_64bit}]) + + # Now check for auxiliary declarations + AC_CACHE_CHECK([for struct dirent64], tcl_cv_struct_dirent64,[ + AC_TRY_COMPILE([#include +#include ],[struct dirent64 p;], + tcl_cv_struct_dirent64=yes,tcl_cv_struct_dirent64=no)]) + if test "x${tcl_cv_struct_dirent64}" = "xyes" ; then + AC_DEFINE(HAVE_STRUCT_DIRENT64, 1, [Is 'struct dirent64' in ?]) + fi + + AC_CACHE_CHECK([for struct stat64], tcl_cv_struct_stat64,[ + AC_TRY_COMPILE([#include ],[struct stat64 p; +], + tcl_cv_struct_stat64=yes,tcl_cv_struct_stat64=no)]) + if test "x${tcl_cv_struct_stat64}" = "xyes" ; then + AC_DEFINE(HAVE_STRUCT_STAT64, 1, [Is 'struct stat64' in ?]) + fi + + AC_CHECK_FUNCS(open64 lseek64) + AC_MSG_CHECKING([for off64_t]) + AC_CACHE_VAL(tcl_cv_type_off64_t,[ + AC_TRY_COMPILE([#include ],[off64_t offset; +], + tcl_cv_type_off64_t=yes,tcl_cv_type_off64_t=no)]) + dnl Define HAVE_TYPE_OFF64_T only when the off64_t type and the + dnl functions lseek64 and open64 are defined. + if test "x${tcl_cv_type_off64_t}" = "xyes" && \ + test "x${ac_cv_func_lseek64}" = "xyes" && \ + test "x${ac_cv_func_open64}" = "xyes" ; then + AC_DEFINE(HAVE_TYPE_OFF64_T, 1, [Is off64_t in ?]) + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + fi + fi +]) + +## +## Here ends the standard Tcl configuration bits and starts the +## TEA specific functions +## + +#------------------------------------------------------------------------ +# TEA_INIT -- +# +# Init various Tcl Extension Architecture (TEA) variables. +# This should be the first called TEA_* macro. +# +# Arguments: +# none +# +# Results: +# +# Defines and substs the following vars: +# CYGPATH +# EXEEXT +# Defines only: +# TEA_VERSION +# TEA_INITED +# TEA_PLATFORM (windows or unix) +# +# "cygpath" is used on windows to generate native path names for include +# files. These variables should only be used with the compiler and linker +# since they generate native path names. +# +# EXEEXT +# Select the executable extension based on the host type. This +# is a lightweight replacement for AC_EXEEXT that doesn't require +# a compiler. +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_INIT], [ + # TEA extensions pass this us the version of TEA they think they + # are compatible with. + TEA_VERSION="3.9" + + AC_MSG_CHECKING([for correct TEA configuration]) + if test x"${PACKAGE_NAME}" = x ; then + AC_MSG_ERROR([ +The PACKAGE_NAME variable must be defined by your TEA configure.in]) + fi + if test x"$1" = x ; then + AC_MSG_ERROR([ +TEA version not specified.]) + elif test "$1" != "${TEA_VERSION}" ; then + AC_MSG_RESULT([warning: requested TEA version "$1", have "${TEA_VERSION}"]) + else + AC_MSG_RESULT([ok (TEA ${TEA_VERSION})]) + fi + + # If the user did not set CFLAGS, set it now to keep macros + # like AC_PROG_CC and AC_TRY_COMPILE from adding "-g -O2". + if test "${CFLAGS+set}" != "set" ; then + CFLAGS="" + fi + + case "`uname -s`" in + *win32*|*WIN32*|*MINGW32_*) + AC_CHECK_PROG(CYGPATH, cygpath, cygpath -w, echo) + EXEEXT=".exe" + TEA_PLATFORM="windows" + ;; + *CYGWIN_*) + CYGPATH=echo + EXEEXT=".exe" + # TEA_PLATFORM is determined later in LOAD_TCLCONFIG + ;; + *) + CYGPATH=echo + # Maybe we are cross-compiling.... + case ${host_alias} in + *mingw32*) + EXEEXT=".exe" + TEA_PLATFORM="windows" + ;; + *) + EXEEXT="" + TEA_PLATFORM="unix" + ;; + esac + ;; + esac + + # Check if exec_prefix is set. If not use fall back to prefix. + # Note when adjusted, so that TEA_PREFIX can correct for this. + # This is needed for recursive configures, since autoconf propagates + # $prefix, but not $exec_prefix (doh!). + if test x$exec_prefix = xNONE ; then + exec_prefix_default=yes + exec_prefix=$prefix + fi + + AC_MSG_NOTICE([configuring ${PACKAGE_NAME} ${PACKAGE_VERSION}]) + + AC_SUBST(EXEEXT) + AC_SUBST(CYGPATH) + + # This package name must be replaced statically for AC_SUBST to work + AC_SUBST(PKG_LIB_FILE) + # Substitute STUB_LIB_FILE in case package creates a stub library too. + AC_SUBST(PKG_STUB_LIB_FILE) + + # We AC_SUBST these here to ensure they are subst'ed, + # in case the user doesn't call TEA_ADD_... + AC_SUBST(PKG_STUB_SOURCES) + AC_SUBST(PKG_STUB_OBJECTS) + AC_SUBST(PKG_TCL_SOURCES) + AC_SUBST(PKG_HEADERS) + AC_SUBST(PKG_INCLUDES) + AC_SUBST(PKG_LIBS) + AC_SUBST(PKG_CFLAGS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_SOURCES -- +# +# Specify one or more source files. Users should check for +# the right platform before adding to their list. +# It is not important to specify the directory, as long as it is +# in the generic, win or unix subdirectory of $(srcdir). +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_SOURCES +# PKG_OBJECTS +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_SOURCES], [ + vars="$@" + for i in $vars; do + case $i in + [\$]*) + # allow $-var names + PKG_SOURCES="$PKG_SOURCES $i" + PKG_OBJECTS="$PKG_OBJECTS $i" + ;; + *) + # check for existence - allows for generic/win/unix VPATH + # To add more dirs here (like 'src'), you have to update VPATH + # in Makefile.in as well + if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ + -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ + -a ! -f "${srcdir}/macosx/$i" \ + ; then + AC_MSG_ERROR([could not find source file '$i']) + fi + PKG_SOURCES="$PKG_SOURCES $i" + # this assumes it is in a VPATH dir + i=`basename $i` + # handle user calling this before or after TEA_SETUP_COMPILER + if test x"${OBJEXT}" != x ; then + j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}" + else + j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}" + fi + PKG_OBJECTS="$PKG_OBJECTS $j" + ;; + esac + done + AC_SUBST(PKG_SOURCES) + AC_SUBST(PKG_OBJECTS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_STUB_SOURCES -- +# +# Specify one or more source files. Users should check for +# the right platform before adding to their list. +# It is not important to specify the directory, as long as it is +# in the generic, win or unix subdirectory of $(srcdir). +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_STUB_SOURCES +# PKG_STUB_OBJECTS +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_STUB_SOURCES], [ + vars="$@" + for i in $vars; do + # check for existence - allows for generic/win/unix VPATH + if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ + -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ + -a ! -f "${srcdir}/macosx/$i" \ + ; then + AC_MSG_ERROR([could not find stub source file '$i']) + fi + PKG_STUB_SOURCES="$PKG_STUB_SOURCES $i" + # this assumes it is in a VPATH dir + i=`basename $i` + # handle user calling this before or after TEA_SETUP_COMPILER + if test x"${OBJEXT}" != x ; then + j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}" + else + j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}" + fi + PKG_STUB_OBJECTS="$PKG_STUB_OBJECTS $j" + done + AC_SUBST(PKG_STUB_SOURCES) + AC_SUBST(PKG_STUB_OBJECTS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_TCL_SOURCES -- +# +# Specify one or more Tcl source files. These should be platform +# independent runtime files. +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_TCL_SOURCES +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_TCL_SOURCES], [ + vars="$@" + for i in $vars; do + # check for existence, be strict because it is installed + if test ! -f "${srcdir}/$i" ; then + AC_MSG_ERROR([could not find tcl source file '${srcdir}/$i']) + fi + PKG_TCL_SOURCES="$PKG_TCL_SOURCES $i" + done + AC_SUBST(PKG_TCL_SOURCES) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_HEADERS -- +# +# Specify one or more source headers. Users should check for +# the right platform before adding to their list. +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_HEADERS +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_HEADERS], [ + vars="$@" + for i in $vars; do + # check for existence, be strict because it is installed + if test ! -f "${srcdir}/$i" ; then + AC_MSG_ERROR([could not find header file '${srcdir}/$i']) + fi + PKG_HEADERS="$PKG_HEADERS $i" + done + AC_SUBST(PKG_HEADERS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_INCLUDES -- +# +# Specify one or more include dirs. Users should check for +# the right platform before adding to their list. +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_INCLUDES +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_INCLUDES], [ + vars="$@" + for i in $vars; do + PKG_INCLUDES="$PKG_INCLUDES $i" + done + AC_SUBST(PKG_INCLUDES) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_LIBS -- +# +# Specify one or more libraries. Users should check for +# the right platform before adding to their list. For Windows, +# libraries provided in "foo.lib" format will be converted to +# "-lfoo" when using GCC (mingw). +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_LIBS +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_LIBS], [ + vars="$@" + for i in $vars; do + if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then + # Convert foo.lib to -lfoo for GCC. No-op if not *.lib + i=`echo "$i" | sed -e 's/^\([[^-]].*\)\.lib[$]/-l\1/i'` + fi + PKG_LIBS="$PKG_LIBS $i" + done + AC_SUBST(PKG_LIBS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_CFLAGS -- +# +# Specify one or more CFLAGS. Users should check for +# the right platform before adding to their list. +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_CFLAGS +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_CFLAGS], [ + PKG_CFLAGS="$PKG_CFLAGS $@" + AC_SUBST(PKG_CFLAGS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_CLEANFILES -- +# +# Specify one or more CLEANFILES. +# +# Arguments: +# one or more file names to clean target +# +# Results: +# +# Appends to CLEANFILES, already defined for subst in LOAD_TCLCONFIG +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_CLEANFILES], [ + CLEANFILES="$CLEANFILES $@" +]) + +#------------------------------------------------------------------------ +# TEA_PREFIX -- +# +# Handle the --prefix=... option by defaulting to what Tcl gave +# +# Arguments: +# none +# +# Results: +# +# If --prefix or --exec-prefix was not specified, $prefix and +# $exec_prefix will be set to the values given to Tcl when it was +# configured. +#------------------------------------------------------------------------ +AC_DEFUN([TEA_PREFIX], [ + if test "${prefix}" = "NONE"; then + prefix_default=yes + if test x"${TCL_PREFIX}" != x; then + AC_MSG_NOTICE([--prefix defaulting to TCL_PREFIX ${TCL_PREFIX}]) + prefix=${TCL_PREFIX} + else + AC_MSG_NOTICE([--prefix defaulting to /usr/local]) + prefix=/usr/local + fi + fi + if test "${exec_prefix}" = "NONE" -a x"${prefix_default}" = x"yes" \ + -o x"${exec_prefix_default}" = x"yes" ; then + if test x"${TCL_EXEC_PREFIX}" != x; then + AC_MSG_NOTICE([--exec-prefix defaulting to TCL_EXEC_PREFIX ${TCL_EXEC_PREFIX}]) + exec_prefix=${TCL_EXEC_PREFIX} + else + AC_MSG_NOTICE([--exec-prefix defaulting to ${prefix}]) + exec_prefix=$prefix + fi + fi +]) + +#------------------------------------------------------------------------ +# TEA_SETUP_COMPILER_CC -- +# +# Do compiler checks the way we want. This is just a replacement +# for AC_PROG_CC in TEA configure.in files to make them cleaner. +# +# Arguments: +# none +# +# Results: +# +# Sets up CC var and other standard bits we need to make executables. +#------------------------------------------------------------------------ +AC_DEFUN([TEA_SETUP_COMPILER_CC], [ + # Don't put any macros that use the compiler (e.g. AC_TRY_COMPILE) + # in this macro, they need to go into TEA_SETUP_COMPILER instead. + + AC_PROG_CC + AC_PROG_CPP + + INSTALL="\$(SHELL) \$(srcdir)/tclconfig/install-sh -c" + AC_SUBST(INSTALL) + + #-------------------------------------------------------------------- + # Checks to see if the make program sets the $MAKE variable. + #-------------------------------------------------------------------- + + AC_PROG_MAKE_SET + + #-------------------------------------------------------------------- + # Find ranlib + #-------------------------------------------------------------------- + + AC_CHECK_TOOL(RANLIB, ranlib) + + #-------------------------------------------------------------------- + # Determines the correct binary file extension (.o, .obj, .exe etc.) + #-------------------------------------------------------------------- + + AC_OBJEXT + AC_EXEEXT +]) + +#------------------------------------------------------------------------ +# TEA_SETUP_COMPILER -- +# +# Do compiler checks that use the compiler. This must go after +# TEA_SETUP_COMPILER_CC, which does the actual compiler check. +# +# Arguments: +# none +# +# Results: +# +# Sets up CC var and other standard bits we need to make executables. +#------------------------------------------------------------------------ +AC_DEFUN([TEA_SETUP_COMPILER], [ + # Any macros that use the compiler (e.g. AC_TRY_COMPILE) have to go here. + AC_REQUIRE([TEA_SETUP_COMPILER_CC]) + + #------------------------------------------------------------------------ + # If we're using GCC, see if the compiler understands -pipe. If so, use it. + # It makes compiling go faster. (This is only a performance feature.) + #------------------------------------------------------------------------ + + if test -z "$no_pipe" -a -n "$GCC"; then + AC_CACHE_CHECK([if the compiler understands -pipe], + tcl_cv_cc_pipe, [ + hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -pipe" + AC_TRY_COMPILE(,, tcl_cv_cc_pipe=yes, tcl_cv_cc_pipe=no) + CFLAGS=$hold_cflags]) + if test $tcl_cv_cc_pipe = yes; then + CFLAGS="$CFLAGS -pipe" + fi + fi + + #-------------------------------------------------------------------- + # Common compiler flag setup + #-------------------------------------------------------------------- + + AC_C_BIGENDIAN + if test "${TEA_PLATFORM}" = "unix" ; then + TEA_TCL_LINK_LIBS + TEA_MISSING_POSIX_HEADERS + # Let the user call this, because if it triggers, they will + # need a compat/strtod.c that is correct. Users can also + # use Tcl_GetDouble(FromObj) instead. + #TEA_BUGGY_STRTOD + fi +]) + +#------------------------------------------------------------------------ +# TEA_MAKE_LIB -- +# +# Generate a line that can be used to build a shared/unshared library +# in a platform independent manner. +# +# Arguments: +# none +# +# Requires: +# +# Results: +# +# Defines the following vars: +# CFLAGS - Done late here to note disturb other AC macros +# MAKE_LIB - Command to execute to build the Tcl library; +# differs depending on whether or not Tcl is being +# compiled as a shared library. +# MAKE_SHARED_LIB Makefile rule for building a shared library +# MAKE_STATIC_LIB Makefile rule for building a static library +# MAKE_STUB_LIB Makefile rule for building a stub library +# VC_MANIFEST_EMBED_DLL Makefile rule for embedded VC manifest in DLL +# VC_MANIFEST_EMBED_EXE Makefile rule for embedded VC manifest in EXE +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_MAKE_LIB], [ + if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes"; then + MAKE_STATIC_LIB="\${STLIB_LD} -out:\[$]@ \$(PKG_OBJECTS)" + MAKE_SHARED_LIB="\${SHLIB_LD} \${SHLIB_LD_LIBS} \${LDFLAGS_DEFAULT} -out:\[$]@ \$(PKG_OBJECTS)" + AC_EGREP_CPP([manifest needed], [ +#if defined(_MSC_VER) && _MSC_VER >= 1400 +print("manifest needed") +#endif + ], [ + # Could do a CHECK_PROG for mt, but should always be with MSVC8+ + VC_MANIFEST_EMBED_DLL="if test -f \[$]@.manifest ; then mt.exe -nologo -manifest \[$]@.manifest -outputresource:\[$]@\;2 ; fi" + VC_MANIFEST_EMBED_EXE="if test -f \[$]@.manifest ; then mt.exe -nologo -manifest \[$]@.manifest -outputresource:\[$]@\;1 ; fi" + MAKE_SHARED_LIB="${MAKE_SHARED_LIB} ; ${VC_MANIFEST_EMBED_DLL}" + TEA_ADD_CLEANFILES([*.manifest]) + ]) + MAKE_STUB_LIB="\${STLIB_LD} -out:\[$]@ \$(PKG_STUB_OBJECTS)" + else + MAKE_STATIC_LIB="\${STLIB_LD} \[$]@ \$(PKG_OBJECTS)" + MAKE_SHARED_LIB="\${SHLIB_LD} -o \[$]@ \$(PKG_OBJECTS) \${SHLIB_LD_LIBS}" + MAKE_STUB_LIB="\${STLIB_LD} \[$]@ \$(PKG_STUB_OBJECTS)" + fi + + if test "${SHARED_BUILD}" = "1" ; then + MAKE_LIB="${MAKE_SHARED_LIB} " + else + MAKE_LIB="${MAKE_STATIC_LIB} " + fi + + #-------------------------------------------------------------------- + # Shared libraries and static libraries have different names. + # Use the double eval to make sure any variables in the suffix is + # substituted. (@@@ Might not be necessary anymore) + #-------------------------------------------------------------------- + + if test "${TEA_PLATFORM}" = "windows" ; then + if test "${SHARED_BUILD}" = "1" ; then + # We force the unresolved linking of symbols that are really in + # the private libraries of Tcl and Tk. + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}`\"" + if test x"${TK_BIN_DIR}" != x ; then + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TK_BIN_DIR}/${TK_STUB_LIB_FILE}`\"" + fi + eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" + else + eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" + fi + # Some packages build their own stubs libraries + eval eval "PKG_STUB_LIB_FILE=${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}" + if test "$GCC" = "yes"; then + PKG_STUB_LIB_FILE=lib${PKG_STUB_LIB_FILE} + fi + # These aren't needed on Windows (either MSVC or gcc) + RANLIB=: + RANLIB_STUB=: + else + RANLIB_STUB="${RANLIB}" + if test "${SHARED_BUILD}" = "1" ; then + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TCL_STUB_LIB_SPEC}" + if test x"${TK_BIN_DIR}" != x ; then + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TK_STUB_LIB_SPEC}" + fi + eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" + RANLIB=: + else + eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" + fi + # Some packages build their own stubs libraries + eval eval "PKG_STUB_LIB_FILE=lib${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}" + fi + + # These are escaped so that only CFLAGS is picked up at configure time. + # The other values will be substituted at make time. + CFLAGS="${CFLAGS} \${CFLAGS_DEFAULT} \${CFLAGS_WARNING}" + if test "${SHARED_BUILD}" = "1" ; then + CFLAGS="${CFLAGS} \${SHLIB_CFLAGS}" + fi + + AC_SUBST(MAKE_LIB) + AC_SUBST(MAKE_SHARED_LIB) + AC_SUBST(MAKE_STATIC_LIB) + AC_SUBST(MAKE_STUB_LIB) + AC_SUBST(RANLIB_STUB) + AC_SUBST(VC_MANIFEST_EMBED_DLL) + AC_SUBST(VC_MANIFEST_EMBED_EXE) +]) + +#------------------------------------------------------------------------ +# TEA_LIB_SPEC -- +# +# Compute the name of an existing object library located in libdir +# from the given base name and produce the appropriate linker flags. +# +# Arguments: +# basename The base name of the library without version +# numbers, extensions, or "lib" prefixes. +# extra_dir Extra directory in which to search for the +# library. This location is used first, then +# $prefix/$exec-prefix, then some defaults. +# +# Requires: +# TEA_INIT and TEA_PREFIX must be called first. +# +# Results: +# +# Defines the following vars: +# ${basename}_LIB_NAME The computed library name. +# ${basename}_LIB_SPEC The computed linker flags. +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_LIB_SPEC], [ + AC_MSG_CHECKING([for $1 library]) + + # Look in exec-prefix for the library (defined by TEA_PREFIX). + + tea_lib_name_dir="${exec_prefix}/lib" + + # Or in a user-specified location. + + if test x"$2" != x ; then + tea_extra_lib_dir=$2 + else + tea_extra_lib_dir=NONE + fi + + for i in \ + `ls -dr ${tea_extra_lib_dir}/$1[[0-9]]*.lib 2>/dev/null ` \ + `ls -dr ${tea_extra_lib_dir}/lib$1[[0-9]]* 2>/dev/null ` \ + `ls -dr ${tea_lib_name_dir}/$1[[0-9]]*.lib 2>/dev/null ` \ + `ls -dr ${tea_lib_name_dir}/lib$1[[0-9]]* 2>/dev/null ` \ + `ls -dr /usr/lib/$1[[0-9]]*.lib 2>/dev/null ` \ + `ls -dr /usr/lib/lib$1[[0-9]]* 2>/dev/null ` \ + `ls -dr /usr/lib64/$1[[0-9]]*.lib 2>/dev/null ` \ + `ls -dr /usr/lib64/lib$1[[0-9]]* 2>/dev/null ` \ + `ls -dr /usr/local/lib/$1[[0-9]]*.lib 2>/dev/null ` \ + `ls -dr /usr/local/lib/lib$1[[0-9]]* 2>/dev/null ` ; do + if test -f "$i" ; then + tea_lib_name_dir=`dirname $i` + $1_LIB_NAME=`basename $i` + $1_LIB_PATH_NAME=$i + break + fi + done + + if test "${TEA_PLATFORM}" = "windows"; then + $1_LIB_SPEC=\"`${CYGPATH} ${$1_LIB_PATH_NAME} 2>/dev/null`\" + else + # Strip off the leading "lib" and trailing ".a" or ".so" + + tea_lib_name_lib=`echo ${$1_LIB_NAME}|sed -e 's/^lib//' -e 's/\.[[^.]]*$//' -e 's/\.so.*//'` + $1_LIB_SPEC="-L${tea_lib_name_dir} -l${tea_lib_name_lib}" + fi + + if test "x${$1_LIB_NAME}" = x ; then + AC_MSG_ERROR([not found]) + else + AC_MSG_RESULT([${$1_LIB_SPEC}]) + fi +]) + +#------------------------------------------------------------------------ +# TEA_PRIVATE_TCL_HEADERS -- +# +# Locate the private Tcl include files +# +# Arguments: +# +# Requires: +# TCL_SRC_DIR Assumes that TEA_LOAD_TCLCONFIG has +# already been called. +# +# Results: +# +# Substitutes the following vars: +# TCL_TOP_DIR_NATIVE +# TCL_INCLUDES +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PRIVATE_TCL_HEADERS], [ + # Allow for --with-tclinclude to take effect and define ${ac_cv_c_tclh} + AC_REQUIRE([TEA_PUBLIC_TCL_HEADERS]) + AC_MSG_CHECKING([for Tcl private include files]) + + TCL_SRC_DIR_NATIVE=`${CYGPATH} ${TCL_SRC_DIR}` + TCL_TOP_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}\" + + # Check to see if tclPort.h isn't already with the public headers + # Don't look for tclInt.h because that resides with tcl.h in the core + # sources, but the Port headers are in a different directory + if test "${TEA_PLATFORM}" = "windows" -a \ + -f "${ac_cv_c_tclh}/tclWinPort.h"; then + result="private headers found with public headers" + elif test "${TEA_PLATFORM}" = "unix" -a \ + -f "${ac_cv_c_tclh}/tclUnixPort.h"; then + result="private headers found with public headers" + else + TCL_GENERIC_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/generic\" + if test "${TEA_PLATFORM}" = "windows"; then + TCL_PLATFORM_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/win\" + else + TCL_PLATFORM_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/unix\" + fi + # Overwrite the previous TCL_INCLUDES as this should capture both + # public and private headers in the same set. + # We want to ensure these are substituted so as not to require + # any *_NATIVE vars be defined in the Makefile + TCL_INCLUDES="-I${TCL_GENERIC_DIR_NATIVE} -I${TCL_PLATFORM_DIR_NATIVE}" + if test "`uname -s`" = "Darwin"; then + # If Tcl was built as a framework, attempt to use + # the framework's Headers and PrivateHeaders directories + case ${TCL_DEFS} in + *TCL_FRAMEWORK*) + if test -d "${TCL_BIN_DIR}/Headers" -a \ + -d "${TCL_BIN_DIR}/PrivateHeaders"; then + TCL_INCLUDES="-I\"${TCL_BIN_DIR}/Headers\" -I\"${TCL_BIN_DIR}/PrivateHeaders\" ${TCL_INCLUDES}" + else + TCL_INCLUDES="${TCL_INCLUDES} ${TCL_INCLUDE_SPEC} `echo "${TCL_INCLUDE_SPEC}" | sed -e 's/Headers/PrivateHeaders/'`" + fi + ;; + esac + result="Using ${TCL_INCLUDES}" + else + if test ! -f "${TCL_SRC_DIR}/generic/tclInt.h" ; then + AC_MSG_ERROR([Cannot find private header tclInt.h in ${TCL_SRC_DIR}]) + fi + result="Using srcdir found in tclConfig.sh: ${TCL_SRC_DIR}" + fi + fi + + AC_SUBST(TCL_TOP_DIR_NATIVE) + + AC_SUBST(TCL_INCLUDES) + AC_MSG_RESULT([${result}]) +]) + +#------------------------------------------------------------------------ +# TEA_PUBLIC_TCL_HEADERS -- +# +# Locate the installed public Tcl header files +# +# Arguments: +# None. +# +# Requires: +# CYGPATH must be set +# +# Results: +# +# Adds a --with-tclinclude switch to configure. +# Result is cached. +# +# Substitutes the following vars: +# TCL_INCLUDES +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PUBLIC_TCL_HEADERS], [ + AC_MSG_CHECKING([for Tcl public headers]) + + AC_ARG_WITH(tclinclude, [ --with-tclinclude directory containing the public Tcl header files], with_tclinclude=${withval}) + + AC_CACHE_VAL(ac_cv_c_tclh, [ + # Use the value from --with-tclinclude, if it was given + + if test x"${with_tclinclude}" != x ; then + if test -f "${with_tclinclude}/tcl.h" ; then + ac_cv_c_tclh=${with_tclinclude} + else + AC_MSG_ERROR([${with_tclinclude} directory does not contain tcl.h]) + fi + else + list="" + if test "`uname -s`" = "Darwin"; then + # If Tcl was built as a framework, attempt to use + # the framework's Headers directory + case ${TCL_DEFS} in + *TCL_FRAMEWORK*) + list="`ls -d ${TCL_BIN_DIR}/Headers 2>/dev/null`" + ;; + esac + fi + + # Look in the source dir only if Tcl is not installed, + # and in that situation, look there before installed locations. + if test -f "${TCL_BIN_DIR}/Makefile" ; then + list="$list `ls -d ${TCL_SRC_DIR}/generic 2>/dev/null`" + fi + + # Check order: pkg --prefix location, Tcl's --prefix location, + # relative to directory of tclConfig.sh. + + eval "temp_includedir=${includedir}" + list="$list \ + `ls -d ${temp_includedir} 2>/dev/null` \ + `ls -d ${TCL_PREFIX}/include 2>/dev/null` \ + `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null`" + if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then + list="$list /usr/local/include /usr/include" + if test x"${TCL_INCLUDE_SPEC}" != x ; then + d=`echo "${TCL_INCLUDE_SPEC}" | sed -e 's/^-I//'` + list="$list `ls -d ${d} 2>/dev/null`" + fi + fi + for i in $list ; do + if test -f "$i/tcl.h" ; then + ac_cv_c_tclh=$i + break + fi + done + fi + ]) + + # Print a message based on how we determined the include path + + if test x"${ac_cv_c_tclh}" = x ; then + AC_MSG_ERROR([tcl.h not found. Please specify its location with --with-tclinclude]) + else + AC_MSG_RESULT([${ac_cv_c_tclh}]) + fi + + # Convert to a native path and substitute into the output files. + + INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tclh}` + + TCL_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" + + AC_SUBST(TCL_INCLUDES) +]) + +#------------------------------------------------------------------------ +# TEA_PRIVATE_TK_HEADERS -- +# +# Locate the private Tk include files +# +# Arguments: +# +# Requires: +# TK_SRC_DIR Assumes that TEA_LOAD_TKCONFIG has +# already been called. +# +# Results: +# +# Substitutes the following vars: +# TK_INCLUDES +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PRIVATE_TK_HEADERS], [ + # Allow for --with-tkinclude to take effect and define ${ac_cv_c_tkh} + AC_REQUIRE([TEA_PUBLIC_TK_HEADERS]) + AC_MSG_CHECKING([for Tk private include files]) + + TK_SRC_DIR_NATIVE=`${CYGPATH} ${TK_SRC_DIR}` + TK_TOP_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}\" + + # Check to see if tkPort.h isn't already with the public headers + # Don't look for tkInt.h because that resides with tk.h in the core + # sources, but the Port headers are in a different directory + if test "${TEA_PLATFORM}" = "windows" -a \ + -f "${ac_cv_c_tkh}/tkWinPort.h"; then + result="private headers found with public headers" + elif test "${TEA_PLATFORM}" = "unix" -a \ + -f "${ac_cv_c_tkh}/tkUnixPort.h"; then + result="private headers found with public headers" + else + TK_GENERIC_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/generic\" + TK_XLIB_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/xlib\" + if test "${TEA_PLATFORM}" = "windows"; then + TK_PLATFORM_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/win\" + else + TK_PLATFORM_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/unix\" + fi + # Overwrite the previous TK_INCLUDES as this should capture both + # public and private headers in the same set. + # We want to ensure these are substituted so as not to require + # any *_NATIVE vars be defined in the Makefile + TK_INCLUDES="-I${TK_GENERIC_DIR_NATIVE} -I${TK_PLATFORM_DIR_NATIVE}" + # Detect and add ttk subdir + if test -d "${TK_SRC_DIR}/generic/ttk"; then + TK_INCLUDES="${TK_INCLUDES} -I\"${TK_SRC_DIR_NATIVE}/generic/ttk\"" + fi + if test "${TEA_WINDOWINGSYSTEM}" != "x11"; then + TK_INCLUDES="${TK_INCLUDES} -I\"${TK_XLIB_DIR_NATIVE}\"" + fi + if test "${TEA_WINDOWINGSYSTEM}" = "aqua"; then + TK_INCLUDES="${TK_INCLUDES} -I\"${TK_SRC_DIR_NATIVE}/macosx\"" + fi + if test "`uname -s`" = "Darwin"; then + # If Tk was built as a framework, attempt to use + # the framework's Headers and PrivateHeaders directories + case ${TK_DEFS} in + *TK_FRAMEWORK*) + if test -d "${TK_BIN_DIR}/Headers" -a \ + -d "${TK_BIN_DIR}/PrivateHeaders"; then + TK_INCLUDES="-I\"${TK_BIN_DIR}/Headers\" -I\"${TK_BIN_DIR}/PrivateHeaders\" ${TK_INCLUDES}" + else + TK_INCLUDES="${TK_INCLUDES} ${TK_INCLUDE_SPEC} `echo "${TK_INCLUDE_SPEC}" | sed -e 's/Headers/PrivateHeaders/'`" + fi + ;; + esac + result="Using ${TK_INCLUDES}" + else + if test ! -f "${TK_SRC_DIR}/generic/tkInt.h" ; then + AC_MSG_ERROR([Cannot find private header tkInt.h in ${TK_SRC_DIR}]) + fi + result="Using srcdir found in tkConfig.sh: ${TK_SRC_DIR}" + fi + fi + + AC_SUBST(TK_TOP_DIR_NATIVE) + AC_SUBST(TK_XLIB_DIR_NATIVE) + + AC_SUBST(TK_INCLUDES) + AC_MSG_RESULT([${result}]) +]) + +#------------------------------------------------------------------------ +# TEA_PUBLIC_TK_HEADERS -- +# +# Locate the installed public Tk header files +# +# Arguments: +# None. +# +# Requires: +# CYGPATH must be set +# +# Results: +# +# Adds a --with-tkinclude switch to configure. +# Result is cached. +# +# Substitutes the following vars: +# TK_INCLUDES +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PUBLIC_TK_HEADERS], [ + AC_MSG_CHECKING([for Tk public headers]) + + AC_ARG_WITH(tkinclude, [ --with-tkinclude directory containing the public Tk header files], with_tkinclude=${withval}) + + AC_CACHE_VAL(ac_cv_c_tkh, [ + # Use the value from --with-tkinclude, if it was given + + if test x"${with_tkinclude}" != x ; then + if test -f "${with_tkinclude}/tk.h" ; then + ac_cv_c_tkh=${with_tkinclude} + else + AC_MSG_ERROR([${with_tkinclude} directory does not contain tk.h]) + fi + else + list="" + if test "`uname -s`" = "Darwin"; then + # If Tk was built as a framework, attempt to use + # the framework's Headers directory. + case ${TK_DEFS} in + *TK_FRAMEWORK*) + list="`ls -d ${TK_BIN_DIR}/Headers 2>/dev/null`" + ;; + esac + fi + + # Look in the source dir only if Tk is not installed, + # and in that situation, look there before installed locations. + if test -f "${TK_BIN_DIR}/Makefile" ; then + list="$list `ls -d ${TK_SRC_DIR}/generic 2>/dev/null`" + fi + + # Check order: pkg --prefix location, Tk's --prefix location, + # relative to directory of tkConfig.sh, Tcl's --prefix location, + # relative to directory of tclConfig.sh. + + eval "temp_includedir=${includedir}" + list="$list \ + `ls -d ${temp_includedir} 2>/dev/null` \ + `ls -d ${TK_PREFIX}/include 2>/dev/null` \ + `ls -d ${TK_BIN_DIR}/../include 2>/dev/null` \ + `ls -d ${TCL_PREFIX}/include 2>/dev/null` \ + `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null`" + if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then + list="$list /usr/local/include /usr/include" + if test x"${TK_INCLUDE_SPEC}" != x ; then + d=`echo "${TK_INCLUDE_SPEC}" | sed -e 's/^-I//'` + list="$list `ls -d ${d} 2>/dev/null`" + fi + fi + for i in $list ; do + if test -f "$i/tk.h" ; then + ac_cv_c_tkh=$i + break + fi + done + fi + ]) + + # Print a message based on how we determined the include path + + if test x"${ac_cv_c_tkh}" = x ; then + AC_MSG_ERROR([tk.h not found. Please specify its location with --with-tkinclude]) + else + AC_MSG_RESULT([${ac_cv_c_tkh}]) + fi + + # Convert to a native path and substitute into the output files. + + INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tkh}` + + TK_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" + + AC_SUBST(TK_INCLUDES) + + if test "${TEA_WINDOWINGSYSTEM}" != "x11"; then + # On Windows and Aqua, we need the X compat headers + AC_MSG_CHECKING([for X11 header files]) + if test ! -r "${INCLUDE_DIR_NATIVE}/X11/Xlib.h"; then + INCLUDE_DIR_NATIVE="`${CYGPATH} ${TK_SRC_DIR}/xlib`" + TK_XINCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" + AC_SUBST(TK_XINCLUDES) + fi + AC_MSG_RESULT([${INCLUDE_DIR_NATIVE}]) + fi +]) + +#------------------------------------------------------------------------ +# TEA_PATH_CONFIG -- +# +# Locate the ${1}Config.sh file and perform a sanity check on +# the ${1} compile flags. These are used by packages like +# [incr Tk] that load *Config.sh files from more than Tcl and Tk. +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --with-$1=... +# +# Defines the following vars: +# $1_BIN_DIR Full path to the directory containing +# the $1Config.sh file +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PATH_CONFIG], [ + # + # Ok, lets find the $1 configuration + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-$1 + # + + if test x"${no_$1}" = x ; then + # we reset no_$1 in case something fails here + no_$1=true + AC_ARG_WITH($1, [ --with-$1 directory containing $1 configuration ($1Config.sh)], with_$1config=${withval}) + AC_MSG_CHECKING([for $1 configuration]) + AC_CACHE_VAL(ac_cv_c_$1config,[ + + # First check to see if --with-$1 was specified. + if test x"${with_$1config}" != x ; then + case ${with_$1config} in + */$1Config.sh ) + if test -f ${with_$1config}; then + AC_MSG_WARN([--with-$1 argument should refer to directory containing $1Config.sh, not to $1Config.sh itself]) + with_$1config=`echo ${with_$1config} | sed 's!/$1Config\.sh$!!'` + fi;; + esac + if test -f "${with_$1config}/$1Config.sh" ; then + ac_cv_c_$1config=`(cd ${with_$1config}; pwd)` + else + AC_MSG_ERROR([${with_$1config} directory doesn't contain $1Config.sh]) + fi + fi + + # then check for a private $1 installation + if test x"${ac_cv_c_$1config}" = x ; then + for i in \ + ../$1 \ + `ls -dr ../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ + `ls -dr ../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ + `ls -dr ../$1*[[0-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ + ../../$1 \ + `ls -dr ../../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ + `ls -dr ../../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ + `ls -dr ../../$1*[[0-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ + ../../../$1 \ + `ls -dr ../../../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ + `ls -dr ../../../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ + `ls -dr ../../../$1*[[0-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ + ${srcdir}/../$1 \ + `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ + `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ + `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ + ; do + if test -f "$i/$1Config.sh" ; then + ac_cv_c_$1config=`(cd $i; pwd)` + break + fi + if test -f "$i/unix/$1Config.sh" ; then + ac_cv_c_$1config=`(cd $i/unix; pwd)` + break + fi + done + fi + + # check in a few common install locations + if test x"${ac_cv_c_$1config}" = x ; then + for i in `ls -d ${libdir} 2>/dev/null` \ + `ls -d ${exec_prefix}/lib 2>/dev/null` \ + `ls -d ${prefix}/lib 2>/dev/null` \ + `ls -d /usr/local/lib 2>/dev/null` \ + `ls -d /usr/contrib/lib 2>/dev/null` \ + `ls -d /usr/lib 2>/dev/null` \ + `ls -d /usr/lib64 2>/dev/null` \ + ; do + if test -f "$i/$1Config.sh" ; then + ac_cv_c_$1config=`(cd $i; pwd)` + break + fi + done + fi + ]) + + if test x"${ac_cv_c_$1config}" = x ; then + $1_BIN_DIR="# no $1 configs found" + AC_MSG_WARN([Cannot find $1 configuration definitions]) + exit 0 + else + no_$1= + $1_BIN_DIR=${ac_cv_c_$1config} + AC_MSG_RESULT([found $$1_BIN_DIR/$1Config.sh]) + fi + fi +]) + +#------------------------------------------------------------------------ +# TEA_LOAD_CONFIG -- +# +# Load the $1Config.sh file +# +# Arguments: +# +# Requires the following vars to be set: +# $1_BIN_DIR +# +# Results: +# +# Substitutes the following vars: +# $1_SRC_DIR +# $1_LIB_FILE +# $1_LIB_SPEC +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_LOAD_CONFIG], [ + AC_MSG_CHECKING([for existence of ${$1_BIN_DIR}/$1Config.sh]) + + if test -f "${$1_BIN_DIR}/$1Config.sh" ; then + AC_MSG_RESULT([loading]) + . "${$1_BIN_DIR}/$1Config.sh" + else + AC_MSG_RESULT([file not found]) + fi + + # + # If the $1_BIN_DIR is the build directory (not the install directory), + # then set the common variable name to the value of the build variables. + # For example, the variable $1_LIB_SPEC will be set to the value + # of $1_BUILD_LIB_SPEC. An extension should make use of $1_LIB_SPEC + # instead of $1_BUILD_LIB_SPEC since it will work with both an + # installed and uninstalled version of Tcl. + # + + if test -f "${$1_BIN_DIR}/Makefile" ; then + AC_MSG_WARN([Found Makefile - using build library specs for $1]) + $1_LIB_SPEC=${$1_BUILD_LIB_SPEC} + $1_STUB_LIB_SPEC=${$1_BUILD_STUB_LIB_SPEC} + $1_STUB_LIB_PATH=${$1_BUILD_STUB_LIB_PATH} + $1_INCLUDE_SPEC=${$1_BUILD_INCLUDE_SPEC} + $1_LIBRARY_PATH=${$1_LIBRARY_PATH} + fi + + AC_SUBST($1_VERSION) + AC_SUBST($1_BIN_DIR) + AC_SUBST($1_SRC_DIR) + + AC_SUBST($1_LIB_FILE) + AC_SUBST($1_LIB_SPEC) + + AC_SUBST($1_STUB_LIB_FILE) + AC_SUBST($1_STUB_LIB_SPEC) + AC_SUBST($1_STUB_LIB_PATH) + + # Allow the caller to prevent this auto-check by specifying any 2nd arg + AS_IF([test "x$2" = x], [ + # Check both upper and lower-case variants + # If a dev wanted non-stubs libs, this function could take an option + # to not use _STUB in the paths below + AS_IF([test "x${$1_STUB_LIB_SPEC}" = x], + [TEA_LOAD_CONFIG_LIB(translit($1,[a-z],[A-Z])_STUB)], + [TEA_LOAD_CONFIG_LIB($1_STUB)]) + ]) +]) + +#------------------------------------------------------------------------ +# TEA_LOAD_CONFIG_LIB -- +# +# Helper function to load correct library from another extension's +# ${PACKAGE}Config.sh. +# +# Results: +# Adds to LIBS the appropriate extension library +#------------------------------------------------------------------------ +AC_DEFUN([TEA_LOAD_CONFIG_LIB], [ + AC_MSG_CHECKING([For $1 library for LIBS]) + # This simplifies the use of stub libraries by automatically adding + # the stub lib to your path. Normally this would add to SHLIB_LD_LIBS, + # but this is called before CONFIG_CFLAGS. More importantly, this adds + # to PKG_LIBS, which becomes LIBS, and that is only used by SHLIB_LD. + if test "x${$1_LIB_SPEC}" != "x" ; then + if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes" ; then + TEA_ADD_LIBS([\"`${CYGPATH} ${$1_LIB_PATH}`\"]) + AC_MSG_RESULT([using $1_LIB_PATH ${$1_LIB_PATH}]) + else + TEA_ADD_LIBS([${$1_LIB_SPEC}]) + AC_MSG_RESULT([using $1_LIB_SPEC ${$1_LIB_SPEC}]) + fi + else + AC_MSG_RESULT([file not found]) + fi +]) + +#------------------------------------------------------------------------ +# TEA_EXPORT_CONFIG -- +# +# Define the data to insert into the ${PACKAGE}Config.sh file +# +# Arguments: +# +# Requires the following vars to be set: +# $1 +# +# Results: +# Substitutes the following vars: +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_EXPORT_CONFIG], [ + #-------------------------------------------------------------------- + # These are for $1Config.sh + #-------------------------------------------------------------------- + + # pkglibdir must be a fully qualified path and (not ${exec_prefix}/lib) + eval pkglibdir="[$]{libdir}/$1${PACKAGE_VERSION}" + if test "${TCL_LIB_VERSIONS_OK}" = "ok"; then + eval $1_LIB_FLAG="-l$1${PACKAGE_VERSION}${DBGX}" + eval $1_STUB_LIB_FLAG="-l$1stub${PACKAGE_VERSION}${DBGX}" + else + eval $1_LIB_FLAG="-l$1`echo ${PACKAGE_VERSION} | tr -d .`${DBGX}" + eval $1_STUB_LIB_FLAG="-l$1stub`echo ${PACKAGE_VERSION} | tr -d .`${DBGX}" + fi + $1_BUILD_LIB_SPEC="-L`pwd` ${$1_LIB_FLAG}" + $1_LIB_SPEC="-L${pkglibdir} ${$1_LIB_FLAG}" + $1_BUILD_STUB_LIB_SPEC="-L`pwd` [$]{$1_STUB_LIB_FLAG}" + $1_STUB_LIB_SPEC="-L${pkglibdir} [$]{$1_STUB_LIB_FLAG}" + $1_BUILD_STUB_LIB_PATH="`pwd`/[$]{PKG_STUB_LIB_FILE}" + $1_STUB_LIB_PATH="${pkglibdir}/[$]{PKG_STUB_LIB_FILE}" + + AC_SUBST($1_BUILD_LIB_SPEC) + AC_SUBST($1_LIB_SPEC) + AC_SUBST($1_BUILD_STUB_LIB_SPEC) + AC_SUBST($1_STUB_LIB_SPEC) + AC_SUBST($1_BUILD_STUB_LIB_PATH) + AC_SUBST($1_STUB_LIB_PATH) + + AC_SUBST(MAJOR_VERSION) + AC_SUBST(MINOR_VERSION) + AC_SUBST(PATCHLEVEL) +]) + + +#------------------------------------------------------------------------ +# TEA_PATH_CELIB -- +# +# Locate Keuchel's celib emulation layer for targeting Win/CE +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --with-celib=... +# +# Defines the following vars: +# CELIB_DIR Full path to the directory containing +# the include and platform lib files +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PATH_CELIB], [ + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-celib + + if test x"${no_celib}" = x ; then + # we reset no_celib in case something fails here + no_celib=true + AC_ARG_WITH(celib,[ --with-celib=DIR use Windows/CE support library from DIR], with_celibconfig=${withval}) + AC_MSG_CHECKING([for Windows/CE celib directory]) + AC_CACHE_VAL(ac_cv_c_celibconfig,[ + # First check to see if --with-celibconfig was specified. + if test x"${with_celibconfig}" != x ; then + if test -d "${with_celibconfig}/inc" ; then + ac_cv_c_celibconfig=`(cd ${with_celibconfig}; pwd)` + else + AC_MSG_ERROR([${with_celibconfig} directory doesn't contain inc directory]) + fi + fi + + # then check for a celib library + if test x"${ac_cv_c_celibconfig}" = x ; then + for i in \ + ../celib-palm-3.0 \ + ../celib \ + ../../celib-palm-3.0 \ + ../../celib \ + `ls -dr ../celib-*3.[[0-9]]* 2>/dev/null` \ + ${srcdir}/../celib-palm-3.0 \ + ${srcdir}/../celib \ + `ls -dr ${srcdir}/../celib-*3.[[0-9]]* 2>/dev/null` \ + ; do + if test -d "$i/inc" ; then + ac_cv_c_celibconfig=`(cd $i; pwd)` + break + fi + done + fi + ]) + if test x"${ac_cv_c_celibconfig}" = x ; then + AC_MSG_ERROR([Cannot find celib support library directory]) + else + no_celib= + CELIB_DIR=${ac_cv_c_celibconfig} + CELIB_DIR=`echo "$CELIB_DIR" | sed -e 's!\\\!/!g'` + AC_MSG_RESULT([found $CELIB_DIR]) + fi + fi +]) + + +# Local Variables: +# mode: autoconf +# End: diff --git a/unix/Makefile.in b/unix/Makefile.in new file mode 100644 index 0000000..f5f18bc --- /dev/null +++ b/unix/Makefile.in @@ -0,0 +1,73 @@ +OS = @OS@ +ARCH = @ARCH@ +ROOT = @ROOT@ +TKFLAGS = @TKFLAGS@ +TKIMGFLAGS = @TKIMGFLAGS@ +JOBS = @CORES@ + +WITHTCL =--with-tcl=$(ROOT)/tcl$(TCLVER)/unix +WITHTK =--with-tk=$(ROOT)/tk$(TCLVER)/unix $(WITHTCL) +CACHE =--config-cache --cache-file=../config.cache + +include ./make.include + +#--------------------------build + +.PHONY : saods9 tcl tk + +saods9 : dirs tcl tk \ + tclcheckdns tcliis tclsignal \ + tclzvfs tclxml xpa \ + tkblt tktable tkimg \ + tkmpeg tkhtml1 tkcon \ + tksao ds9 + +tcl : tcl$(TCLVER)/unix/Makefile + @echo "" + @echo "*** Install tcl$(TCLVER) ***" + $(MAKE) -C tcl$(TCLVER)/unix -j $(JOBS) install + +tcl$(TCLVER)/unix/Makefile : + @echo "" + @echo "*** Configure tcl$(TCLVER) ***" + cd tcl$(TCLVER)/unix; \ + ./configure \ + --prefix $(ROOT) -exec-prefix $(ROOT) \ + --disable-shared --enable-symbols \ + --config-cache --cache-file=../../config.cache + +tk : tk$(TCLVER)/unix/Makefile + @echo "" + @echo "*** Install tk$(TCLVER) ***" + $(MAKE) -C tk$(TCLVER)/unix -j $(JOBS) install + +tk$(TCLVER)/unix/Makefile : + @echo "" + @echo "*** Configure tk$(TCLVER) ***" + cd tk$(TCLVER)/unix; \ + ./configure \ + $(TKFLAGS) \ + --prefix $(ROOT) -exec-prefix $(ROOT) \ + --disable-shared --enable-symbols \ + --config-cache --cache-file=../../config.cache + +#--------------------------clean + +.PHONY : tkunixclean + +tkunixclean : + +#--------------------------distclean + +.PHONY : tkunixdistclean + +tkunixdistclean : + +#--------------------------distribution + +.PHONY : dist + +dist : + cd bin; tar cvf - ds9* | gzip > ../dist/ds9.$(ARCH).$(DS9VERSION).tar.gz + cd bin; tar cvf - xpa* | gzip > ../dist/xpa.$(ARCH).$(XPAVERSION).tar.gz + diff --git a/unix/aclocal.m4 b/unix/aclocal.m4 new file mode 100755 index 0000000..0b05739 --- /dev/null +++ b/unix/aclocal.m4 @@ -0,0 +1,9 @@ +# +# Include the TEA standard macro set +# + +builtin(include,tclconfig/tcl.m4) + +# +# Add here whatever m4 macros you want to define for your package +# diff --git a/unix/configure b/unix/configure new file mode 100755 index 0000000..a36d8d5 --- /dev/null +++ b/unix/configure @@ -0,0 +1,3075 @@ +#! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.69 for saods9 7.5. +# +# +# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +# +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +# Use a proper internal environment variable to ensure we don't fall + # into an infinite loop, continuously re-executing ourselves. + if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then + _as_can_reexec=no; export _as_can_reexec; + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +as_fn_exit 255 + fi + # We don't want this to propagate to other subprocesses. + { _as_can_reexec=; unset _as_can_reexec;} +if test "x$CONFIG_SHELL" = x; then + as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi +" + as_required="as_fn_return () { (exit \$1); } +as_fn_success () { as_fn_return 0; } +as_fn_failure () { as_fn_return 1; } +as_fn_ret_success () { return 0; } +as_fn_ret_failure () { return 1; } + +exitcode=0 +as_fn_success || { exitcode=1; echo as_fn_success failed.; } +as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } +as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } +as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } +if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : + +else + exitcode=1; echo positional parameters were not saved. +fi +test x\$exitcode = x0 || exit 1 +test -x / || exit 1" + as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO + as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO + eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && + test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1" + if (eval "$as_required") 2>/dev/null; then : + as_have_required=yes +else + as_have_required=no +fi + if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : + +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_found=false +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + as_found=: + case $as_dir in #( + /*) + for as_base in sh bash ksh sh5; do + # Try only shells that exist, to save several forks. + as_shell=$as_dir/$as_base + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : + CONFIG_SHELL=$as_shell as_have_required=yes + if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : + break 2 +fi +fi + done;; + esac + as_found=false +done +$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : + CONFIG_SHELL=$SHELL as_have_required=yes +fi; } +IFS=$as_save_IFS + + + if test "x$CONFIG_SHELL" != x; then : + export CONFIG_SHELL + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +exit 255 +fi + + if test x$as_have_required = xno; then : + $as_echo "$0: This script requires a shell more modern than all" + $as_echo "$0: the shells that I found on your system." + if test x${ZSH_VERSION+set} = xset ; then + $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" + $as_echo "$0: be upgraded to zsh 4.3.4 or later." + else + $as_echo "$0: Please tell bug-autoconf@gnu.org about your system, +$0: including any error possibly output before this +$0: message. Then install a modern shell, or manually run +$0: the script under such a shell if you do have one." + fi + exit 1 +fi +fi +fi +SHELL=${CONFIG_SHELL-/bin/sh} +export SHELL +# Unset more variables known to interfere with behavior of common tools. +CLICOLOR_FORCE= GREP_OPTIONS= +unset CLICOLOR_FORCE GREP_OPTIONS + +## --------------------- ## +## M4sh Shell Functions. ## +## --------------------- ## +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + + + as_lineno_1=$LINENO as_lineno_1a=$LINENO + as_lineno_2=$LINENO as_lineno_2a=$LINENO + eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && + test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { + # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } + + # If we had to re-execute with $CONFIG_SHELL, we're ensured to have + # already done that, so ensure we don't try to do so again and fall + # in an infinite loop. This has already happened in practice. + _as_can_reexec=no; export _as_can_reexec + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +test -n "$DJDIR" || exec 7<&0 &1 + +# Name of the host. +# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_clean_files= +ac_config_libobj_dir=. +LIBOBJS= +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= + +# Identity of this package. +PACKAGE_NAME='saods9' +PACKAGE_TARNAME='saods9' +PACKAGE_VERSION='7.5' +PACKAGE_STRING='saods9 7.5' +PACKAGE_BUGREPORT='' +PACKAGE_URL='' + +ac_subst_vars='LTLIBOBJS +LIBOBJS +CORES +TKIMGFLAGS +TKFLAGS +ROOT +ARCH +OS +PKG_CFLAGS +PKG_LIBS +PKG_INCLUDES +PKG_HEADERS +PKG_TCL_SOURCES +PKG_STUB_OBJECTS +PKG_STUB_SOURCES +PKG_STUB_LIB_FILE +PKG_LIB_FILE +EXEEXT +CYGPATH +target_alias +host_alias +build_alias +LIBS +ECHO_T +ECHO_N +ECHO_C +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_URL +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL' +ac_subst_files='' +ac_user_opts=' +enable_option_checking +with_arch +' + ac_precious_vars='build_alias +host_alias +target_alias' + + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +ac_unrecognized_opts= +ac_unrecognized_sep= +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datarootdir='${prefix}/share' +datadir='${datarootdir}' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +includedir='${prefix}/include' +oldincludedir='/usr/include' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' + +ac_prev= +ac_dashdash= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval $ac_prev=\$ac_option + ac_prev= + continue + fi + + case $ac_option in + *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *=) ac_optarg= ;; + *) ac_optarg=yes ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=\$ac_optarg ;; + + -without-* | --without-*) + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=no ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) as_fn_error $? "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information" + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + case $ac_envvar in #( + '' | [0-9]* | *[!_$as_cr_alnum]* ) + as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; + esac + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + as_fn_error $? "missing argument to $ac_option" +fi + +if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; + fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac +fi + +# Check all directory arguments for consistency. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir +do + eval ac_val=\$$ac_var + # Remove trailing slashes. + case $ac_val in + */ ) + ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` + eval $ac_var=\$ac_val;; + esac + # Be sure to have absolute directory names. + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac + as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + as_fn_error $? "working directory cannot be determined" +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + as_fn_error $? "pwd does not report name of working directory" + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$as_myself" || +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_myself" : 'X\(//\)[^/]' \| \ + X"$as_myself" : 'X\(//\)$' \| \ + X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_myself" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures saods9 7.5 to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking ...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root [DATAROOTDIR/doc/saods9] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] +_ACEOF + + cat <<\_ACEOF +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of saods9 7.5:";; + esac + cat <<\_ACEOF + +Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-arch build name + +Report bugs to the package provider. +_ACEOF +ac_status=$? +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +fi + +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +saods9 configure 7.5 +generated by GNU Autoconf 2.69 + +Copyright (C) 2012 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit +fi + +## ------------------------ ## +## Autoconf initialization. ## +## ------------------------ ## +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by saods9 $as_me 7.5, which was +generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + $as_echo "PATH: $as_dir" + done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; + 2) + as_fn_append ac_configure_args1 " '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + as_fn_append ac_configure_args " '$ac_arg'" + ;; + esac + done +done +{ ac_configure_args0=; unset ac_configure_args0;} +{ ac_configure_args1=; unset ac_configure_args1;} + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + $as_echo "## ---------------- ## +## Cache variables. ## +## ---------------- ##" + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + (set) 2>&1 | + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + sed -n \ + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( + *) + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) + echo + + $as_echo "## ----------------- ## +## Output variables. ## +## ----------------- ##" + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + $as_echo "## ------------------- ## +## File substitutions. ## +## ------------------- ##" + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi + + if test -s confdefs.h; then + $as_echo "## ----------- ## +## confdefs.h. ## +## ----------- ##" + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + $as_echo "$as_me: caught signal $ac_signal" + $as_echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -f -r conftest* confdefs.h + +$as_echo "/* confdefs.h */" > confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_URL "$PACKAGE_URL" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer an explicitly selected file to automatically selected ones. +ac_site_file1=NONE +ac_site_file2=NONE +if test -n "$CONFIG_SITE"; then + # We do not want a PATH search for config.site. + case $CONFIG_SITE in #(( + -*) ac_site_file1=./$CONFIG_SITE;; + */*) ac_site_file1=$CONFIG_SITE;; + *) ac_site_file1=./$CONFIG_SITE;; + esac +elif test "x$prefix" != xNONE; then + ac_site_file1=$prefix/share/config.site + ac_site_file2=$prefix/etc/config.site +else + ac_site_file1=$ac_default_prefix/share/config.site + ac_site_file2=$ac_default_prefix/etc/config.site +fi +for ac_site_file in "$ac_site_file1" "$ac_site_file2" +do + test "x$ac_site_file" = xNONE && continue + if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 +$as_echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" \ + || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "failed to load site script $ac_site_file +See \`config.log' for more details" "$LINENO" 5; } + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special files + # actually), so we avoid doing that. DJGPP emulates it as a regular file. + if test /dev/null != "$cache_file" && test -f "$cache_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 +$as_echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi +else + { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 +$as_echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 +$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 +$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 +$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) as_fn_append ac_configure_args " '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 +$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} + as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 +fi +## -------------------- ## +## Main body of script. ## +## -------------------- ## + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + +#-------------------------------------------------------------------- +# Call TEA_INIT as the first TEA_ macro to set up initial vars. +# This will define a ${TEA_PLATFORM} variable == "unix" or "windows" +# as well as PKG_LIB_FILE and PKG_STUB_LIB_FILE. +#-------------------------------------------------------------------- + + + # TEA extensions pass this us the version of TEA they think they + # are compatible with. + TEA_VERSION="3.9" + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for correct TEA configuration" >&5 +$as_echo_n "checking for correct TEA configuration... " >&6; } + if test x"${PACKAGE_NAME}" = x ; then + as_fn_error $? " +The PACKAGE_NAME variable must be defined by your TEA configure.in" "$LINENO" 5 + fi + if test x"3.9" = x ; then + as_fn_error $? " +TEA version not specified." "$LINENO" 5 + elif test "3.9" != "${TEA_VERSION}" ; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: warning: requested TEA version \"3.9\", have \"${TEA_VERSION}\"" >&5 +$as_echo "warning: requested TEA version \"3.9\", have \"${TEA_VERSION}\"" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok (TEA ${TEA_VERSION})" >&5 +$as_echo "ok (TEA ${TEA_VERSION})" >&6; } + fi + + # If the user did not set CFLAGS, set it now to keep macros + # like AC_PROG_CC and AC_TRY_COMPILE from adding "-g -O2". + if test "${CFLAGS+set}" != "set" ; then + CFLAGS="" + fi + + case "`uname -s`" in + *win32*|*WIN32*|*MINGW32_*) + # Extract the first word of "cygpath", so it can be a program name with args. +set dummy cygpath; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CYGPATH+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CYGPATH"; then + ac_cv_prog_CYGPATH="$CYGPATH" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CYGPATH="cygpath -w" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + test -z "$ac_cv_prog_CYGPATH" && ac_cv_prog_CYGPATH="echo" +fi +fi +CYGPATH=$ac_cv_prog_CYGPATH +if test -n "$CYGPATH"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CYGPATH" >&5 +$as_echo "$CYGPATH" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + EXEEXT=".exe" + TEA_PLATFORM="windows" + ;; + *CYGWIN_*) + CYGPATH=echo + EXEEXT=".exe" + # TEA_PLATFORM is determined later in LOAD_TCLCONFIG + ;; + *) + CYGPATH=echo + # Maybe we are cross-compiling.... + case ${host_alias} in + *mingw32*) + EXEEXT=".exe" + TEA_PLATFORM="windows" + ;; + *) + EXEEXT="" + TEA_PLATFORM="unix" + ;; + esac + ;; + esac + + # Check if exec_prefix is set. If not use fall back to prefix. + # Note when adjusted, so that TEA_PREFIX can correct for this. + # This is needed for recursive configures, since autoconf propagates + # $prefix, but not $exec_prefix (doh!). + if test x$exec_prefix = xNONE ; then + exec_prefix_default=yes + exec_prefix=$prefix + fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: configuring ${PACKAGE_NAME} ${PACKAGE_VERSION}" >&5 +$as_echo "$as_me: configuring ${PACKAGE_NAME} ${PACKAGE_VERSION}" >&6;} + + + + + # This package name must be replaced statically for AC_SUBST to work + + # Substitute STUB_LIB_FILE in case package creates a stub library too. + + + # We AC_SUBST these here to ensure they are subst'ed, + # in case the user doesn't call TEA_ADD_... + + + + + + + + + +ac_aux_dir= +for ac_dir in tclconfig "$srcdir"/tclconfig; do + if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + as_fn_error $? "cannot find install-sh, install.sh, or shtool in tclconfig \"$srcdir\"/tclconfig" "$LINENO" 5 +fi + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + + + +#-------------------------------------------------------------------- + + +# Check whether --with-arch was given. +if test "${with_arch+set}" = set; then : + withval=$with_arch; +else + with_arch=unknown +fi + + +OS="unix" + + +ARCH=$with_arch + + +ROOT=$ac_pwd + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking system version" >&5 +$as_echo_n "checking system version... " >&6; } +if ${tcl_cv_sys_version+:} false; then : + $as_echo_n "(cached) " >&6 +else + + # TEA specific: + if test "${TEA_PLATFORM}" = "windows" ; then + tcl_cv_sys_version=windows + else + tcl_cv_sys_version=`uname -s`-`uname -r` + if test "$?" -ne 0 ; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: can't find uname command" >&5 +$as_echo "$as_me: WARNING: can't find uname command" >&2;} + tcl_cv_sys_version=unknown + else + if test "`uname -s`" = "AIX" ; then + tcl_cv_sys_version=AIX-`uname -v`.`uname -r` + fi + fi + fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_sys_version" >&5 +$as_echo "$tcl_cv_sys_version" >&6; } + system=$tcl_cv_sys_version + + +case $system in + Darwin* ) + TKFLAGS="--disable-corefoundation" + + + CORES=`sysctl -n "hw.ncpu"` + ;; + CYGWIN* ) + CORES=`grep -c ^processor /proc/cpuinfo` + ;; + Linux* ) + TKIMGFLAGS="tcl_cv_cc_visibility_hidden=no" + + + CORES=`grep -c ^processor /proc/cpuinfo` + ;; + *) + CORES=1 + ;; +esac + + +ac_config_files="$ac_config_files Makefile" + +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, we kill variables containing newlines. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes: double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \. + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) | + sed ' + /^ac_cv_env_/b end + t clear + :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + if test "x$cache_file" != "x/dev/null"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 +$as_echo "$as_me: updating cache $cache_file" >&6;} + if test ! -f "$cache_file" || test -h "$cache_file"; then + cat confcache >"$cache_file" + else + case $cache_file in #( + */* | ?:*) + mv -f confcache "$cache_file"$$ && + mv -f "$cache_file"$$ "$cache_file" ;; #( + *) + mv -f confcache "$cache_file" ;; + esac + fi + fi + else + { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 +$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +# Transform confdefs.h into DEFS. +# Protect against shell expansion while executing Makefile rules. +# Protect against Makefile macro expansion. +# +# If the first sed substitution is executed (which looks for macros that +# take arguments), then branch to the quote section. Otherwise, +# look for a macro that doesn't take arguments. +ac_script=' +:mline +/\\$/{ + N + s,\\\n,, + b mline +} +t clear +:clear +s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g +t quote +s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g +t quote +b any +:quote +s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g +s/\[/\\&/g +s/\]/\\&/g +s/\$/$$/g +H +:any +${ + g + s/^\n// + s/\n/ /g + p +} +' +DEFS=`sed -n "$ac_script" confdefs.h` + + +ac_libobjs= +ac_ltlibobjs= +U= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`$as_echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" + as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + + +: "${CONFIG_STATUS=./config.status}" +ac_write_fail=0 +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +as_write_fail=0 +cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false + +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +exec 6>&1 +## ----------------------------------- ## +## Main body of $CONFIG_STATUS script. ## +## ----------------------------------- ## +_ASEOF +test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# Save the log message, to keep $0 and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by saods9 $as_me 7.5, which was +generated by GNU Autoconf 2.69. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + +_ACEOF + +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac + + + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# Files that config.status was made for. +config_files="$ac_config_files" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +ac_cs_usage="\ +\`$as_me' instantiates files and other configuration actions +from templates according to the current configuration. Unless the files +and actions are specified as TAGs, all are instantiated by default. + +Usage: $0 [OPTION]... [TAG]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + --config print configuration, then exit + -q, --quiet, --silent + do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + +Configuration files: +$config_files + +Report bugs to the package provider." + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" +ac_cs_version="\\ +saods9 config.status 7.5 +configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" + +Copyright (C) 2012 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +test -n "\$AWK" || AWK=awk +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# The default lists apply if the user does not specify any file. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=?*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + --*=) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg= + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac + + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + $as_echo "$ac_cs_version"; exit ;; + --config | --confi | --conf | --con | --co | --c ) + $as_echo "$ac_cs_config"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + '') as_fn_error $? "missing file argument" ;; + esac + as_fn_append CONFIG_FILES " '$ac_optarg'" + ac_need_defaults=false;; + --he | --h | --help | --hel | -h ) + $as_echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) as_fn_error $? "unrecognized option: \`$1' +Try \`$0 --help' for more information." ;; + + *) as_fn_append ac_config_targets " $1" + ac_need_defaults=false ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +if \$ac_cs_recheck; then + set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + shift + \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 + CONFIG_SHELL='$SHELL' + export CONFIG_SHELL + exec "\$@" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + $as_echo "$ac_log" +} >&5 + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + + *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; + esac +done + + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. +$debug || +{ + tmp= ac_tmp= + trap 'exit_status=$? + : "${ac_tmp:=$tmp}" + { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status +' 0 + trap 'as_fn_exit 1' 1 2 13 15 +} +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 +ac_tmp=$tmp + +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. +if test -n "$CONFIG_FILES"; then + + +ac_cr=`echo X | tr X '\015'` +# On cygwin, bash can eat \r inside `` if the user requested igncr. +# But we know of no other shell where ac_cr would be empty at this +# point, so we can use a bashism as a fallback. +if test "x$ac_cr" = x; then + eval ac_cr=\$\'\\r\' +fi +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' +else + ac_cs_awk_cr=$ac_cr +fi + +echo 'BEGIN {' >"$ac_tmp/subs1.awk" && +_ACEOF + + +{ + echo "cat >conf$$subs.awk <<_ACEOF" && + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" +} >conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 +ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + . ./conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done +rm -f conf$$subs.sh + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && +_ACEOF +sed -n ' +h +s/^/S["/; s/!.*/"]=/ +p +g +s/^[^!]*!// +:repl +t repl +s/'"$ac_delim"'$// +t delim +:nl +h +s/\(.\{148\}\)..*/\1/ +t more1 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +p +n +b repl +:more1 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t nl +:delim +h +s/\(.\{148\}\)..*/\1/ +t more2 +s/["\\]/\\&/g; s/^/"/; s/$/"/ +p +b +:more2 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t delim +' >$CONFIG_STATUS || ac_write_fail=1 +rm -f conf$$subs.awk +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACAWK +cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" + +} +{ + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } + + print line +} + +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +else + cat +fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ + || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 +_ACEOF + +# VPATH may cause trouble with some makes, so we remove sole $(srcdir), +# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ +h +s/// +s/^/:/ +s/[ ]*$/:/ +s/:\$(srcdir):/:/g +s/:\${srcdir}:/:/g +s/:@srcdir@:/:/g +s/^:*// +s/:*$// +x +s/\(=[ ]*\).*/\1/ +G +s/\n// +s/^[^=]*=[ ]*$// +}' +fi + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +fi # test -n "$CONFIG_FILES" + + +eval set X " :F $CONFIG_FILES " +shift +for ac_tag +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$ac_tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + as_fn_append ac_file_inputs " '$ac_f'" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} + fi + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac + + case $ac_tag in + *:-:* | *:-) cat >"$ac_tmp/stdin" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; + esac + ;; + esac + + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir="$ac_dir"; as_fn_mkdir_p + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + + case $ac_mode in + :F) + # + # CONFIG_FILE + # + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= +ac_sed_dataroot=' +/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac +_ACEOF + +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_sed_extra="$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s|@configure_input@|$ac_sed_conf_input|;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +$ac_datarootdir_hack +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ + >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ + "$ac_tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&5 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&2;} + + rm -f "$ac_tmp/stdin" + case $ac_file in + -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; + *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; + esac \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + ;; + + + + esac + +done # for ac_tag + + +as_fn_exit 0 +_ACEOF +ac_clean_files=$ac_clean_files_save + +test $ac_write_fail = 0 || + as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || as_fn_exit 1 +fi +if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 +$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} +fi + + diff --git a/unix/configure.in b/unix/configure.in new file mode 100755 index 0000000..b9d1e9c --- /dev/null +++ b/unix/configure.in @@ -0,0 +1,72 @@ +#!/bin/bash -norc +dnl This file is an input file used by the GNU "autoconf" program to +dnl generate the file "configure", which is run during Tcl installation +dnl to configure the system for the local environment. + +#----------------------------------------------------------------------- +# Sample configure.in for Tcl Extensions. The only places you should +# need to modify this file are marked by the string __CHANGE__ +#----------------------------------------------------------------------- + +#----------------------------------------------------------------------- +# __CHANGE__ +# Set your package name and version numbers here. +# +# This initializes the environment with PACKAGE_NAME and PACKAGE_VERSION +# set as provided. These will also be added as -D defs in your Makefile +# so you can encode the package version directly into the source files. +# This will also define a special symbol for Windows (BUILD_ +# so that we create the export library with the dll. +#----------------------------------------------------------------------- + +AC_INIT([saods9], [7.5]) + +#-------------------------------------------------------------------- +# Call TEA_INIT as the first TEA_ macro to set up initial vars. +# This will define a ${TEA_PLATFORM} variable == "unix" or "windows" +# as well as PKG_LIB_FILE and PKG_STUB_LIB_FILE. +#-------------------------------------------------------------------- + +TEA_INIT([3.9]) + +AC_CONFIG_AUX_DIR(tclconfig) + +#-------------------------------------------------------------------- + +AC_ARG_WITH([arch],AC_HELP_STRING([--with-arch],[build name]),[],[with_arch=unknown]) + +OS="unix" +AC_SUBST(OS) + +ARCH=$with_arch +AC_SUBST(ARCH) + +ROOT=$ac_pwd +AC_SUBST(ROOT) + +TEA_CONFIG_SYSTEM + +case $system in + Darwin* ) + TKFLAGS="--disable-corefoundation" + AC_SUBST(TKFLAGS) + + CORES=`sysctl -n "hw.ncpu"` + ;; + CYGWIN* ) + CORES=`grep -c ^processor /proc/cpuinfo` + ;; + Linux* ) + TKIMGFLAGS="tcl_cv_cc_visibility_hidden=no" + AC_SUBST(TKIMGFLAGS) + + CORES=`grep -c ^processor /proc/cpuinfo` + ;; + *) + CORES=1 + ;; +esac +AC_SUBST(CORES) + +AC_OUTPUT([Makefile]) + diff --git a/unix/tclconfig/CVS/Entries b/unix/tclconfig/CVS/Entries new file mode 100644 index 0000000..d18d8ca --- /dev/null +++ b/unix/tclconfig/CVS/Entries @@ -0,0 +1,5 @@ +/ChangeLog/1.1/Wed Aug 5 15:22:20 2015// +/README.txt/1.1/Wed Aug 5 15:22:21 2015// +/install-sh/1.1/Wed Aug 5 15:22:21 2015// +/tcl.m4/1.1/Wed Aug 5 15:22:21 2015// +D diff --git a/unix/tclconfig/CVS/Repository b/unix/tclconfig/CVS/Repository new file mode 100644 index 0000000..4adeb87 --- /dev/null +++ b/unix/tclconfig/CVS/Repository @@ -0,0 +1 @@ +saods9/unix/tclconfig diff --git a/unix/tclconfig/CVS/Root b/unix/tclconfig/CVS/Root new file mode 100644 index 0000000..fea38f8 --- /dev/null +++ b/unix/tclconfig/CVS/Root @@ -0,0 +1 @@ +:ext:joye@bokhara:/proj/rd/cvsroot diff --git a/unix/tclconfig/ChangeLog b/unix/tclconfig/ChangeLog new file mode 100644 index 0000000..ffda2bb --- /dev/null +++ b/unix/tclconfig/ChangeLog @@ -0,0 +1,980 @@ +2013-07-04 Jan Nijtmans + + * unix/tcl.m4: Bug [3324676]: AC_PROG_INSTALL incompat, + Bug [3606445]: Unneeded -DHAVE_NO_SEH=1 when not building on Windows + +2013-07-02 Jan Nijtmans + + * unix/tcl.m4: Bug [32afa6e256]: dirent64 check is incorrect in tcl.m4 + (thanks to Brian Griffin) + +2013-06-20 Jan Nijtmans + + * unix/tcl.m4: Use X11/Xlib.h for checking where X11 can be found + in stead of X11/XIntrinsic.h. Suggested by Pietro Cerutti. + +2013-06-04 Jan Nijtmans + + * unix/tcl.m4: Eliminate NO_VIZ macro as current + zlib uses HAVE_HIDDEN in stead. One more last-moment + fix for FreeBSD by Pietro Cerutti + +2013-05-19 Jan Nijtmans + + * unix/tcl.m4: Fix for FreeBSD, and remove support for old + FreeBSD versions. Patch by Pietro Cerutti + +2013-03-12 Jan Nijtmans + + * unix/tcl.m4: Patch by Andrew Shadura, providing better support for + * three architectures they have in Debian. + +2012-08-07 Stuart Cassoff + + * tcl.m4: Added "-DNDEBUG" to CFLAGS_DEFAULT + when building with --disable-symbols. + +2012-08-07 Stuart Cassoff + + * tcl.m4: [Bug 3555058]: Checkin [30736d63f0] broke + CFLAGS_DEFAULT, LDFLAGS_DEFAULT + +2012-08-07 Stuart Cassoff + + * tcl.m4: [Bug 3511806]: Checkin [30736d63f0] broke CFLAGS + +2012-08-07 Jan Nijtmans + + * tcl.m4: [Bug 3511806]: Checkin [30736d63f0] broke CFLAGS + +2012-07-25 Jan Nijtmans + + * tcl.m4: My previous commit (2012-04-03) broke the ActiveTcl + build for AMD64, because of the quotes in "C://AMD64/cl.exe". + It turns out that the AC_TRY_COMPILE macro cannot handle that. + +2012-07-22 Stuart Cassoff + + * tcl.m4: Tidy: consistency, spelling, phrasing, whitespace. + No functional change. + +2012-04-03 Jan Nijtmans + + * tcl.m4: [Bug 3511806] Compiler checks too early + This change allows to build the cygwin and mingw32 ports of + Tcl/Tk extensions to build out-of-the-box using a native or + cross-compiler, e.g. on Cygwin, Linux or Darwin. + +2011-04-02 Jan Nijtmans + + * install-sh: Fix issue with library stripping in install-sh + (backported from kevin_walzer's patch from Tcl 8.6 trunk) + +2011-04-05 Andreas Kupries + + * tcl.m4: Applied patch by Jeff Lawson. Nicer error message when + tclConfig.sh was not found. + +2010-12-15 Stuart Cassoff + + * install-sh: Upgrade to newer install-sh and use it. + * tcl.m4: + +2010-12-14 Stuart Cassoff + + * tcl.m4: Better building on OpenBSD. + +2010-12-14 Jan Nijtmans + + * tcl.m4: when using gcc, don't try to determine Win64 SDK + +2010-12-12 Jan Nijtmans + + * tcl.m4: Determine correctly a cross-compiler-windres + +2010-11-23 Jan Nijtmans + + * tcl.m4: add some cross-compile support, borrowed from Tcl 8.6 + +2010-09-16 Jeff Hobbs + + * tcl.m4: correct HP-UX LDFLAGS (only used when building big shell) + +2010-09-14 Jeff Hobbs + + * tcl.m4: add extra if check for .manifest file generation + Add notice about package name and version being built. + +2010-09-09 Jan Nijtmans + + * tcl.m4: [FREQ #3058486] TEA_LOAD_CONFIG doesn't set all BUILD_ vars + Slightly related: defining BUILD_$1 on all platforms - not only win - + allows the -fvisibility feature to be used in extensions as well, at + least if you compile against tcl >= 8.5. + +2010-08-26 Jeff Hobbs + + * tcl.m4: ensure safe quoting for autoheader usage + +2010-08-19 Jeff Hobbs + + * tcl.m4: add TEA_ADD_CLEANFILES macro to make adding cleanfiles + easier, and add *.exp to CLEANFILES Windows default. + (TEA_MAKE_LIB): Enhanced to check for MSVC that requires manifests + and auto-embed it into proj DLL via MAKE_SHARED_LIB. Also define + VC_MANIFEST_EMBED_DLL and VC_MANIFEST_EMBED_EXE that do the same + magic in case it is needed for extended TEA projects. + +2010-08-16 Jeff Hobbs + + *** Bump to TEA_VERSION 3.9 *** + If upgrading from TEA_VERSION 3.8, copy over tcl.m4, change + TEA_INIT to use 3.9 and reconfigure (ac-2.59+). + BUILD_${PACKAGE_NAME} will be auto-defined on Windows for + correct setting of TCL_STORAGE_CLASS. + TEA_LOAD_CONFIG users should remove the SHLIB_LD_LIBS setting done + in configure.in (LIBS will be automagically populated by + TEA_LOAD_CONFIG). + TEA_EXPORT_CONFIG has been added for ${pkg}Config.sh creators + SHLIB_LD_FLAGS was deprecated a while ago, remove it if it is + still in your Makefile.in. + + * tcl.m4: add /usr/lib64 to set of auto-search dirs. [Bug 1230554] + Auto-define BUILD_$PACKAGE_NAME so users don't need to. This + needs to correspond with $pkg.h define magic for TCL_STORAGE_CLASS. + Auto-define CLEANFILES. Users can expand it. + (SHLIB_LD_LIBS): define to '${LIBS}' default and change it only if + necessary. Platforms not using this may simply not work or have + very funky linkers. + (TEA_LOAD_CONFIG): When loading config for another extension, + auto-add stub libraries found with TEA_ADD_LIBS. Eases + configure.in for modules like itk and img::*. + (TEA_EXPORT_CONFIG): Add standardized function for exporting a + ${pkg}Config.sh. See use by img::* and itcl. + +2010-08-12 Jeff Hobbs + + *** Bump to TEA_VERSION 3.8 *** + If upgrading from TEA_VERSION 3.7, copy over tcl.m4, change + TEA_INIT to use 3.8 and reconfigure (ac-2.59+). + No other changes should be necessary. + + * tcl.m4: remove more vestigial bits from removed platforms. + Add back SCO_SV-3.2*. + Remove use of DL_LIBS and DL_OBJS and related baggage - these are + only needed by the core to support 'load'. + Allow for macosx in TEA_ADD_SOURCES. + Correct check for found_xincludes=no in TEA_PATH_UNIX_X. + +2010-08-11 Jeff Hobbs + + * tcl.m4: remove the following old platform configurations: + UNIX_SV*|UnixWare-5*, SunOS-4.*, SINIX*5.4*, SCO_SV-3.2*, + OSF1-1.*, NEXTSTEP-*, NetBSD-1.*|FreeBSD-[[1-2]].*, MP-RAS-*, + IRIX-5.*, HP-UX-*.08.*|HP-UX-*.09.*|HP-UX-*.10.*, dgux*, + BSD/OS-2.1*|BSD/OS-3* + (AIX): drop AIX-pre4 support and use of ldAix, use -bexpall/-brtl + +2010-07-05 Jan Nijtmans + + * tcl.m4: [Patch #1055668] removal of exported internals from + tclInt.h (EXTERN macro) + +2010-04-14 Jan Nijtmans + + * tcl.m4 - Backport a lot of quoting fixes from tcl8.6/unix/tcl.m4 + - Fix determination of CYGPATH for CYGWIN + With those fixes, itcl and tdbc compile fine with CYGWIN + +2010-04-06 Jan Nijtmans + + * install-sh [Bug 2982540] configure and install* script files + should always have LF + +2010-02-19 Stuart Cassoff + + * tcl.m4: Correct compiler/linker flags for threaded builds on + OpenBSD. + +2010-01-19 Jan Nijtmans + + * tcl.m4: Detect CYGWIN variant: win32 or unix + +2010-01-03 Donal K. Fellows + + * unix/tcl.m4 (TEA_CONFIG_CFLAGS): [Tcl Bug 1636685]: Use the + configuration for modern FreeBSD suggested by the FreeBSD porter. + +2009-10-22 Jan Nijtmans + + * tcl.m4: [Tcl Patch #2883533] tcl.m4 support for Haiku OS + +2009-04-27 Jeff Hobbs + + * tcl.m4 (TEA_CONFIG_CFLAGS): harden the check to add _r to CC on + AIX with threads. + +2009-04-10 Daniel Steffen + + * tcl.m4 (Darwin): check for 64-bit TkAqua. + +2009-03-26 Jan Nijtmans + + * tclconfig/tcl.m4: Adapt LDFLAGS and LD_SEARCH_FLAGS + together with SHLIB_LD definition to unbreak building on HPUX. + +2009-03-20 Andreas Kupries + + * tclconfig/tcl.m4: Changed SHLIB_LD definition to unbreak + building on HPUX. + +2009-03-16 Joe English + + * tcl.m4(TEA_PUBLIC_TK_HEADERS): Look at ${TK_INCLUDE_SPEC} + (found in tkConfig.sh) when trying to guess where tk.h might be + [Patch 1960628]. + +2009-03-11 Joe English + + * tcl.m4: Allow ${SHLIB_SUFFIX} to be overridden at + configure-time [Patch 1960628]. Also fix some comment typos, + and an uninitialized variable bug-waiting-to-happen. + +2008-12-21 Jan Nijtmans + + * tcl.m4: [Bug 2073255] Tcl_GetString(NULL) doesn't crash on HP-UX + (this bug report was for Tcl, but holds for TEA as well.) + +2008-12-20 Daniel Steffen + + * tcl.m4: sync with tdbc tcl.m4 changes + (SunOS-5.11): Sun cc SHLIB_LD: use LDFLAGS_DEFAULT instead of LDFLAGS + +2008-12-02 Jeff Hobbs + + *** Bump to TEA_VERSION 3.7 *** + + * tcl.m4: in private header check, check for Port.h instead + of Int.h to ensure all private headers are available. + +2008-11-04 Daniel Steffen + + * tcl.m4 (Darwin): sync TEA_PRIVATE_TK_HEADERS handling of + Tk.framework PrivateHeaders with TEA_PRIVATE_TCL_HEADERS. + +2008-11-04 Jeff Hobbs + + * tcl.m4 (TEA_PATH_TCLCONFIG, TEA_PATH_TKCONFIG): exit with error + when tclConfig.sh cannot be found. [Bug #1997760] + (TEA_PRIVATE_TCL_HEADERS, TEA_PRIVATE_TK_HEADERS): allow for + finding the headers installed in the public areas, e.g. a result of + make install-private-headers. [Bug #1631922] + +2008-08-12 Daniel Steffen + + * tcl.m4 (Darwin): link shlib with current and compatiblity version + flags; look for libX11.dylib when searching for X11 libraries. + +2008-06-12 Daniel Steffen + + * tcl.m4 (SunOS-5.11): fix 64bit amd64 support with gcc & Sun cc. + +2008-03-27 Daniel Steffen + + * tcl.m4 (SunOS-5.1x): fix 64bit support for Sun cc. [Bug 1921166] + +2008-02-01 Donal K. Fellows + + * tcl.m4 (TEA_CONFIG_CFLAGS): Updated to work at least in part with + more modern VC versions. Currently just made the linker flags more + flexible; more work may be needed. + +2007-10-26 Daniel Steffen + + * tcl.m4 (Darwin): add support for 64-bit X11. + +2007-10-23 Jeff Hobbs + + *** Tagged tea-3-branch to start TEA 4 development on HEAD *** + +2007-09-17 Joe English + + * tcl.m4: use '${CC} -shared' instead of 'ld -Bshareable' + to build shared libraries on current NetBSDs [Bug 1749251]. + +2007-09-15 Daniel Steffen + + * tcl.m4: replace all direct references to compiler by ${CC} to + enable CC overriding at configure & make time. + (SunOS-5.1x): replace direct use of '/usr/ccs/bin/ld' in SHLIB_LD by + 'cc' compiler driver. + +2007-08-08 Jeff Hobbs + + * tcl.m4: check Ttk dir for Tk private headers (8.5). + Add some comments to other bits. + +2007-06-25 Jeff Hobbs + + * tcl.m4 (TEA_PROG_TCLSH, TEA_PROG_WISH): move where / is added. + +2007-06-13 Jeff Hobbs + + * tcl.m4: fix --with-tkinclude alignment. [Bug 1506111] + +2007-06-06 Daniel Steffen + + * tcl.m4 (Darwin): fix 64bit arch removal in fat 32&64bit builds. + +2007-05-18 Donal K. Fellows + + * tcl.m4: Added quoting so that paths with spaces cause fewer + problems. + +2007-03-07 Daniel Steffen + + * tcl.m4 (Darwin): s/CFLAGS/CPPFLAGS/ in -mmacosx-version-min check. + +2007-02-15 Jeff Hobbs + + * tcl.m4: correct private header check to search in generic subdir + +2007-02-09 Jeff Hobbs + + *** Bump to TEA_VERSION 3.6 *** + + * tcl.m4: correct -d to -f + (TEA_CONFIG_CFLAGS): SHLIB_SUFFIX is .so on HP ia64 [Bug 1615058] + +2007-02-08 Jeff Hobbs + + * tcl.m4 (TEA_PRIVATE_TCL_HEADERS, TEA_PRIVATE_TK_HEADERS): check + that the dirs actually have private headers. [Bug 1631922] + +2007-02-04 Daniel Steffen + + * tcl.m4: add caching to -pipe check. + +2007-01-25 Daniel Steffen + + * tcl.m4: integrate CPPFLAGS into CFLAGS as late as possible and + move (rather than duplicate) -isysroot flags from CFLAGS to CPPFLAGS to + avoid errors about multiple -isysroot flags from some older gcc builds. + +2006-01-19 Daniel Steffen + + * tcl.m4: ensure CPPFLAGS env var is used when set. [Bug 1586861] + (Darwin): add -isysroot and -mmacosx-version-min flags to CPPFLAGS when + present in CFLAGS to avoid discrepancies between what headers configure + sees during preprocessing tests and compiling tests. + +2006-12-19 Daniel Steffen + + * tcl.m4 (Darwin): --enable-64bit: verify linking with 64bit -arch flag + succeeds before enabling 64bit build. + +2006-12-16 Daniel Steffen + + * tcl.m4 (Linux): fix previous change to use makefile variable + LDFLAGS_DEFAULT instead of LDFLAGS in SHLIB_LD, to ensure linker + flags in sampleextension Makefile are picked up. + +2006-11-26 Daniel Steffen + + * tcl.m4 (Linux): --enable-64bit support. [Patch 1597389], [Bug 1230558] + +2006-08-18 Daniel Steffen + + * tcl.m4 (Darwin): add support for --enable-64bit on x86_64, for + universal builds including x86_64 and for use of -mmacosx-version-min + instead of MACOSX_DEPLOYMENT_TARGET. For Tk extensions, remove 64-bit + arch flags from CFLAGS like in the Tk configure, as neither TkAqua nor + TkX11 can be built for 64-bit at present. + +2006-03-28 Jeff Hobbs + + * tcl.m4: []-quote AC_DEFUN functions. + (TEA_PATH_TKCONFIG): Fixed Windows-specific check for tkConfig.sh. + (TEA_MAKE_LIB): Prepend 'lib' for Windows-gcc configs. + +2006-03-07 Joe English + + * tcl.m4: Set SHLIB_LD_FLAGS='${LIBS}' on NetBSD, + as per the other *BSD variants [Bug 1334613]. + +2006-01-25 Jeff Hobbs + + *** Bump to TEA version 3.5 *** + + * tcl.m4: keep LD_SEARCH_FLAGS and CC_SEARCH_FLAGS synchronous + with core tcl.m4 meaning. + +2006-01-24 Daniel Steffen + + * tcl.m4 (Darwin): use makefile variable LDFLAGS_DEFAULT instead of + LDFLAGS in SHLIB_LD, to ensure linker flags in sampleextension Makefile + are picked up. [Bug 1403343] + +2006-01-23 Jeff Hobbs + + * tcl.m4: add C:/Tcl/lib and C:/Progra~1/Tcl/lib dirs to check for + *Config.sh on Windows. [Bug 1407544] + +2006-01-23 Daniel Steffen + + * tcl.m4 (Darwin): for Tk extensions, remove -arch ppc64 from CFLAGS + like in the Tk configure, as neither TkAqua nor TkX11 can be built for + 64bit at present (no 64bit GUI libraries). + +2006-01-22 Jeff Hobbs + + * tcl.m4: restore system=windows on Windows. + Remove error if 'ar' isn't found (it may not be on Windows). + Do not add -lxnet or define _XOPEN_SOURCE on HP-UX by default. + Ensure the C|LDFLAGS_DEFAULT gets the fully sub'd value at + configure time. + +2006-01-10 Daniel Steffen + + * tcl.m4: add caching, use AC_CACHE_CHECK instead of AC_CACHE_VAL + where possible, consistent message quoting, sync relevant + tcl/unix/tcl.m4 HEAD changes and gratuitous formatting differences + (notably sunc removal of support for for ancient BSD's, IRIX 4, + RISCos and Ultrix by kennykb), Darwin improvements to + TEA_LOAD_*CONFIG to make linking work against Tcl/Tk frameworks + installed in arbitrary location, change TEA_PROG_* search order + (look in *_BIN_DIR parents before *_PREFIX). + +2006-01-05 Jeff Hobbs + + * tcl.m4: add dkf's system config refactor + +2006-01-04 Jeff Hobbs + + * tcl.m4: remove extraneous ' that causes bash 3.1 to choke + +2005-12-19 Joe English + + * tcl.m4 (TEA_PATH_TCLCONFIG &c): Look for tclConfig.sh &c + in ${libdir}, where they are installed by default [Patch #1377407]. + +2005-12-05 Don Porter + + * tcl.m4 (TEA_PUBLIC_*_HEADERS): Better support for finding + header files for uninstalled Tcl and Tk. + +2005-12-02 Jeff Hobbs + + * tcl.m4: correctly bump TEA_VERSION var to 3.4 + +2005-12-01 Daniel Steffen + + * unix/tcl.m4 (Darwin): fixed error when MACOSX_DEPLOYMENT_TARGET unset + +2005-11-29 Jeff Hobbs + + * tcl.m4: *** Bump to TEA version 3.4 *** + Add Windows x64 build support. + Remove TEA_PATH_NOSPACE and handle the problem with ""s where + necessary - the macro relied on TCLSH_PROG which didn't work for + cross-compiles. + +2005-11-27 Daniel Steffen + + * tcl.m4 (Darwin): add 64bit support, add CFLAGS to SHLIB_LD to + support passing -isysroot in env(CFLAGS) to configure (flag can't + be present twice, so can't be in both CFLAGS and LDFLAGS during + configure), don't use -prebind when deploying on 10.4. + (TEA_ENABLE_LANGINFO, TEA_TIME_HANDLER): add/fix caching. + +2005-10-30 Daniel Steffen + + * tcl.m4: fixed two tests for TEA_WINDOWINGSYSTEM = "aqua" that + should have been for `uname -s` = "Darwin" instead; added some + missing quoting. + (TEA_PROG_TCLSH, TEA_PROG_WISH): fix incorrect assumption that + install location of tclConfig.sh/tkConfig.sh allows to determine + the tclsh/wish install dir via ../bin. Indeed tcl/tk can be + configured with arbitrary --libdir and --bindir (independent of + prefix) and such a configuration is in fact standard with Darwin + framework builds. At least now also check ${TCL_PREFIX}/bin + resp. ${TK_PREFIX}/bin for presence of tclsh resp. wish (if tcl/tk + have been configured with arbitrary --bindir, this will still not + find them, for a general solution *Config.sh would need to contain + the values of bindir/libdir/includedir passed to configure). + +2005-10-07 Jeff Hobbs + + * tcl.m4: Fix Solaris 5.10 check and Solaris AMD64 64-bit builds. + +2005-10-04 Jeff Hobbs + + * tcl.m4 (TEA_PRIVATE_TCL_HEADERS): add / to finish sed macro + (TEA_ENABLE_THREADS): don't check for pthread_attr_setstacksize func + +2005-09-13 Jeff Hobbs + + * tcl.m4: *** Update to TEA version 3.3 *** + define TEA_WINDOWINGSYSTEM in TEA_LOAD_TKCONFIG. + Make --enable-threads the default (users can --disable-threads). + Improve AIX ${CC}_r fix to better check existing ${CC} value. + Do the appropriate evals to not require the *TOP_DIR_NATIVE vars + be set for extensions that use private headers. + Make aqua check for Xlib compat headers the same as win32. + +2005-07-26 Mo DeJong + + * tcl.m4 (TEA_PROG_TCLSH, TEA_BUILD_TCLSH, + TEA_PROG_WISH, TEA_BUILD_WISH): Remove + TEA_BUILD_TCLSH and TEA_BUILD_WISH because + of complaints that it broke the build when + only an installed version of Tcl was available + at extension build time. The TEA_PROG_TCLSH and + TEA_PROG_WISH macros will no longer search the + path at all. The build tclsh or installed + tclsh shell will now be found by TEA_PROG_TCLSH. + +2005-07-24 Mo DeJong + + * tcl.m4 (TEA_PROG_TCLSH, TEA_BUILD_TCLSH, + TEA_PROG_WISH, TEA_BUILD_WISH): + Split confused search for tclsh on PATH and + build and install locations into two macros. + TEA_PROG_TCLSH and TEA_PROG_WISH search the + system PATH for an installed tclsh or wish. + The TEA_BUILD_TCLSH and TEA_BUILD_WISH + macros determine the name of tclsh or + wish in the Tcl or Tk build directory even + if tclsh or wish has not yet been built. + [Tcl bug 1160114] + [Tcl patch 1244153] + +2005-06-23 Daniel Steffen + + * tcl.m4 (TEA_PRIVATE_TK_HEADERS): add ${TK_SRC_DIR}/macosx to + TK_INCLUDES when building against TkAqua. + + * tcl.m4 (TEA_PATH_X): fixed missing comma in AC_DEFINE + + * tcl.m4: changes to better support framework builds of Tcl and Tk out + of the box: search framework install locations for *Config.sh, and if in + presence of a framework build, use the framework's Headers and + PrivateHeaders directories for public and private includes. [FR 947735] + +2005-06-18 Daniel Steffen + + * tcl.m4 (Darwin): add -headerpad_max_install_names to LDFLAGS to + ensure we can always relocate binaries with install_name_tool. + +2005-06-04 Daniel Steffen + + * tcl.m4 (TEA_PATH_X): for TEA_WINDOWINGSYSTEM == aqua, check if xlib + compat headers are available in tkheaders location, otherwise add xlib + sourcedir to TK_XINCLUDES. + +2005-04-25 Daniel Steffen + + * tcl.m4: added AC_DEFINE* descriptions (from core tcl.m4) to allow + use with autoheader. + (Darwin): added configure checks for recently added linker flags + -single_module and -search_paths_first to allow building with older + tools (and on Mac OS X 10.1), use -single_module in SHLIB_LD. + (TEA_MISSING_POSIX_HEADERS): added caching of dirent.h check. + (TEA_BUGGY_STRTOD): added caching (sync with core tcl.m4). + +2005-03-24 Jeff Hobbs + + * tcl.m4 (TEA_TCL_64BIT_FLAGS): use Tcl header defaults for wide + int type only on Windows when __int64 is detected as valid. + +2005-03-24 Don Porter + + * README.txt: Update reference to "SC_* macros" to "TEA_* macros". + * tcl.m4: Incorporated recent improvements in SC_PATH_TCLCONFIG + and SC_PATH_TKCONFIG into TEA_PATH_TCLCONFIG and TEA_PATH_TKCONFIG. + Corrected search path in TEA_PATH_CONFIG and added + AC_SUBST($1_BIN_DIR) to TEA_LOAD_CONFIG so that packages that load + the configuration of another package can know where they loaded + it from. + +2005-03-18 Jeff Hobbs + + * tcl.m4 (TEA_CONFIG_CFLAGS): correct 2005-03-17 change to have + variant LD_SEARCH_FLAGS for gcc and cc builds. + + * tcl.m4 (TEA_PROG_TCLSH, TEA_PROG_WISH): correct x-compile check. + +2005-03-17 Jeff Hobbs + + * tcl.m4: Correct gcc build and HP-UX-11. + +2005-02-08 Jeff Hobbs + + * tcl.m4 (TEA_ADD_LIBS): don't touch lib args starting with -. + (TEA_CONFIG_CFLAGS): only define _DLL for CE in shared build. + (TEA_MAKE_LIB): set RANLIB* to : on Windows (it's not needed). + +2005-02-01 Jeff Hobbs + + * tcl.m4: redo of 2005-01-27 changes to correctly handle paths + with spaces. Win/CE and Win/64 builds now require a prebuilt + tclsh to handle conversion to short pathnames. This is done in + the new TEA_PATH_NOSPACE macro. For Win/CE|64, make CC just the + compiler and move the necessary includes to CFLAGS. + (TEA_CONFIG_CFLAGS): Add Solaris 64-bit gcc build support. + (TEA_PROG_TCLSH, TEA_PROG_WISH): Allow TCLSH_PROG and WISH_PROG to + be set in the env and prevent resetting. + (TEA_ADD_LIBS): On Windows using GCC (mingw), convert foo.lib + args to -lfoo, for use with mingw. + *** POTENTIAL INCOMPATABILITY *** + (TEA_CONFIG_CFLAGS): Fix AIX gcc builds to work out-of-box. + Bumped TEA to 3.2. + +2005-01-27 Jeff Hobbs + + * tcl.m4: remove cygpath calls to support msys. + Update base CE build assumption to "420,ARMV4,ARM,Pocket PC 2003". + Make STLIB_LD use $LINKBIN -lib. + +2005-01-25 Daniel Steffen + + * tcl.m4 (Darwin): fixed bug with static build linking to dynamic + library in /usr/lib etc instead of linking to static library earlier + in search path. [Tcl Bug 956908] + Removed obsolete references to Rhapsody. + +2004-12-29 Jeff Hobbs + + * tcl.m4: Updates for VC7 compatibility, fixing CFLAGS and LDFLAGS + options, using better default -O levels. [Bug 1092952, 1091967] + +2004-12-29 Joe English + + * tcl.m4: Do not use ${DBGX} suffix when building + shared libraries [patch #1081595, TIP #34] + +2004-09-07 Jeff Hobbs + + * tcl.m4 (TEA_CONFIG_CFLAGS): support eVC4 Win/CE builds + +2004-08-10 Jeff Hobbs + + * tcl.m4 (TEA_INIT, TEA_PREFIX): update handling of exec_prefix to + work around subdir configures since autoconf only propagates the + prefix (not exec_prefix). + +2004-07-23 Daniel Steffen + + * tcl.m4 (TEA_CONFIG_CFLAGS): Darwin section: brought inline with + Tcl 8.5 HEAD config, removed core specific & obsolete settings. + +2004-07-22 Jeff Hobbs + + * tcl.m4 (TEA_PATH_X): check in TK_DEFS for MAC_OSX_TK to see if + we are compiling on Aqua. Add TEA_WINDOWINGSYSTEM var that + reflects 'tk windowingsystem' value. + +2004-07-16 Jeff Hobbs + + * tcl.m4 (TEA_ENABLE_THREADS): force a threaded build when + building against a threaded core. + (CFLAGS_WARNING): Remove -Wconversion for gcc builds + (TEA_CONFIG_CFLAGS): Reorder configure.in for better 64-bit build + configuration, replacing EXTRA_CFLAGS with CFLAGS. [Bug #874058] + Update to latest Tcl 8.5 head config settings. + Call this TEA version 3.1. + +2004-04-29 Jeff Hobbs + + * tcl.m4 (TEA_TCL_64BIT_FLAGS): replace AC_TRY_RUN test with + AC_TRY_COMPILE for the long vs. long long check. (kenny) + +2004-04-26 Jeff Hobbs + + * tcl.m4 (TEA_TCL_64BIT_FLAGS): update against core tcl.m4 to + define TCL_WIDE_INT_IS_LONG if 'using long'. + +2004-03-19 Jeff Hobbs + + * tcl.m4: correct Windows builds getting LDFLAGS info in MAKE_LIB + +2004-02-11 Jeff Hobbs + + * tcl.m4: correct TCL_INCLUDES for private headers on Windows - it + doesn't need the eval. + +2004-02-10 Jeff Hobbs + + * tcl.m4: don't require TK_INCLUDES and TCL_INCLUDES to have the + DIR_NATIVE vars defined when using private headers on unix. + Allow $... to TEA_ADD_SOURCES for constructs like + TEA_ADD_SOURCES([\$(WIN_OBJECTS)]), that allow the developer to + place more in the Makefile.in. + tkUnixPort.h checks for HAVE_LIMITS_H, so do both HAVE and + CHECK on limits.h + +2003-12-10 Jeff Hobbs + + * Makefile.in: added TEA_ADD_LIBS, TEA_ADD_INCLUDES and + * configure: TEA_ADD_CFLAGS to configurable parameters with + * configure.in: PKG_* equivs in the Makefile. This allows the + * tclconfig/tcl.m4: user to worry less about actual magic VAR names. + Corrected Makefile.in to note that TEA_ADD_TCL_SOURCES requires + exact file names. + +2003-12-09 Jeff Hobbs + + * tcl.m4: updated OpenBSD support based on [Patch #775246] (cassoff) + +2003-12-05 Jeff Hobbs + + * configure: + * configure.in: + * Makefile.in (VPATH): readd $(srcdir) to front of VPATH as the + first part of VPATH can get chopped off. + Change .c.$(OBJEXT) rule to .c.@OBJEXT@ to support more makes. + * tclconfig/tcl.m4: add TEA_ADD_STUB_SOURCES to support libstub + generation and TEA_ADD_TCL_SOURCES to replace RUNTIME_SOURCES as + the way the user specifies library files. + +2003-12-03 Jeff Hobbs + + * configure: Update of TEA spec to (hopefully) simplify + * configure.in: some aspects of TEA by making use of more + * Makefile.in: AC 2.5x features. Use PACKAGE_NAME (instead + * generic/tclsample.c: of PACKAGE) and PACKAGE_VERSION (instead of + * tclconfig/tcl.m4: VERSION) arguments to AC_INIT as the TEA + package name and version. + Provide a version argument to TEA_INIT - starting with 3.0. + Drop all use of interior shell substs that older makefiles didn't + like. Use PKG_* naming convention instead. + Move specification of source files and public headers into + configure.in with TEA_ADD_SOURCES and TEA_ADD_HEADERS. These will + be munged during ./configure into the right obj file names (no + $(SOURCES:.c=.obj) needed). + There is almost nothing that should be touched in Makefile.in now + for the developer. May want to add a TEA_ADD_TCL_SOURCES for the + RUNTIME_SOURCES that remains. + Use SHLID_LD_FLAGS (instead of SHLID_LDFLAGS) as Tcl does. + Only specify the user requested LDFLAGS/CFLAGS in the Makefile, + don't mention the _OPTIMIZE/_DEBUG variants. + +2003-10-15 Jeff Hobbs + + * tcl.m4: create a TEA_SETUP_COMPILER_CC the precedes the + TEA_SETUP_COMPILER macro. They are split so the check for CC + occurs before any use of CC. Also add AC_PROG_CPP to the compiler + checks. + +2003-10-06 Jeff Hobbs + + * tcl.m4: Updated for autoconf 2.5x prereq. + Where TCL_WIDE_INT_TYPE would be __int64, defer to the code checks + in tcl.h, which also handles TCL_LL_MODIFIER* properly. + +2003-04-22 Jeff Hobbs + + * tcl.m4: correct default setting of ARCH for WinCE builds. + Correct \ escaping for CE sed macros. + +2003-04-10 Jeff Hobbs + + * tcl.m4: replace $(syscal) construct with older `syscall` for + systems where sh != bash. + +2003-04-09 Jeff Hobbs + + * tcl.m4 (TEA_WITH_CELIB): add --enable-wince and --with-celib + options for Windows/CE compilation support. Requires the + Microsoft eMbedded SDK and Keuchel's celib emulation layer. + +2003-02-18 Jeff Hobbs + + * tcl.m4 (TEA_ENABLE_THREADS): Make sure -lpthread gets passed on + the link line when checking for the pthread_attr_setstacksize + symbol. (dejong) + + * tcl.m4 (TEA_SETUP_COMPILER): added default calls to + TEA_TCL_EARLY_FLAGS, TEA_TCL_64BIT_FLAGS, + TEA_MISSING_POSIX_HEADERS and TEA_BUGGY_STRTOD. + +2003-02-14 Jeff Hobbs + + * tcl.m4: correct HP-UX ia64 --enable-64bit build flags + +2003-01-29 Jeff Hobbs + + * tcl.m4: check $prefix/lib as well as $exec_prefix/lib when + looking for tcl|tkConfig.sh, as this check is done before we would + set exec_prefix when the user does not define it. + +2003-01-21 Mo DeJong + + * tcl.m4 (TEA_CONFIG_CFLAGS): Fix build support + for mingw, the previous implementation would + use VC++ when compiling with mingw gcc. Don't + pass -fPIC since gcc always compiles pic code + under win32. Change some hard coded cases + of gcc to ${CC}. + +2002-10-15 Jeff Hobbs + + * tcl.m4: move the CFLAGS definition from TEA_ENABLE_SHARED to + TEA_MAKE_LIB because setting too early confuses other AC_* macros. + Correct the HP-11 SHLIB_LD_LIBS setting. + + * tcl.m4: add the CFLAGS definition into TEA_ENABLE_SHARED and + make it pick up the env CFLAGS at configure time. + +2002-10-09 Jeff Hobbs + + * tcl.m4: add --enable-symbols=mem option to enable TCL_MEM_DEBUG. + Improved AIX 64-bit build support, allow it on AIX-4 as well. + Enable 64-bit HP-11 compilation with gcc. + Enable 64-bit IRIX64-6 cc build support. + Correct FreeBSD thread library linkage. + Add OSF1 static build support. + Improve SunOS-5 shared build SHLIB_LD macro. + +2002-07-20 Zoran Vasiljevic + + * tcl.m4: Added MINGW32 to list of systems checked for Windows build. + Also, fixes some indentation issues with "--with-XXX" options. + +2002-04-23 Jeff Hobbs + + * tcl.m4 (TEA_ENABLE_THREADS): added USE_THREAD_ALLOC define to + use new threaded allocatory by default on Unix for Tcl 8.4. + (TEA_CONFIG_CFLAGS): corrected LD_SEARCH_FLAGS for FreeBSD-3+. + +2002-04-22 Jeff Hobbs + + * tcl.m4 (TEA_SETUP_COMPILER): removed call to AC_CYGWIN so that + we can use autoconf 2.5x as well as 2.13. This prevents us from + being able to warn against the use of cygwin gcc at configure + time, but allows autoconf 2.5x, which is what is shipped with most + newer systems. + +2002-04-11 Jeff Hobbs + + * tcl.m4: Enabled COFF as well as CV style debug info with + --enable-symbols to allow Dr. Watson users to see function info. + More info on debugging levels can be obtained at: + http://msdn.microsoft.com/library/en-us/dnvc60/html/gendepdebug.asp + +2002-04-03 Jeff Hobbs + + * tcl.m4: change all SC_* macros to TEA_*. The SC_ was for + Scriptics, which is no more. TEA represents a better, independent + prefix that won't need changing. + Added preliminary mingw gcc support. [Patch #538772] + Added TEA_PREFIX macro that handles defaulting the prefix and + exec_prefix vars to those used by Tcl if none were specified. + Added TEA_SETUP_COMPILER macro that encompasses the AC_PROG_CC + check and several other basic AC_PROG checks needed for making + executables. This greatly simplifies user's configure.in files. + Collapsed AIX-5 defines into AIX-* with extra checks for doing the + ELF stuff on AIX-5-ia64. + Updated TEA_ENABLE_THREADS to take an optional arg to allow + switching it on by default (for Thread) and add sanity checking to + warn the user if configuring threads incompatibly. + +2002-03-29 Jeff Hobbs + + * tcl.m4: made sure that SHLIB_LDFLAGS was set to LDFLAGS_DEFAULT. + Removed --enable-64bit support for AIX-4 because it wasn't correct. + Added -MT or -MD Windows linker switches to properly support + symbols-enabled builds. + +2002-03-28 Jeff Hobbs + + * tcl.m4: called AC_MSG_ERROR when SC_TEA_INIT wasn't called first + instead of calling it as that inlines it each time in shell code. + Changed Windows CFLAGS_OPTIMIZE to use -O2 instead of -Oti. + Noted TCL_LIB_VERSIONS_OK=nodots for Windows builds. + A few changes to support itcl (and perhaps others): + Added support for making your own stub libraries to SC_MAKE_LIB. + New SC_PATH_CONFIG and SC_LOAD_CONFIG that take a package name arg + and find that ${pkg}Config.sh file. itk uses this for itcl. + +2002-03-27 Jeff Hobbs + + * tcl.m4: made SC_LOAD_TKCONFIG recognize when working with a Tk + build dir setup. + Added EXTRA_CFLAGS and SHLIB_LD_LIBS substs to SC_CONFIG_CFLAGS. + Added XLIBSW onto LIBS when it is defined. + Remove TCL_LIBS from MAKE_LIB and correctly use SHLIB_LD_LIBS + instead to not rely as much on tclConfig.sh cached info. + Add TK_BIN_DIR to paths to find wish in SC_PROG_WISH. + These move towards making TEA much more independent of *Config.sh. + +2002-03-19 Jeff Hobbs + + * tcl.m4: corrected forgotten (UN)SHARED_LIB_SUFFIX and + SHLIB_SUFFIX defines for Win. + (SC_PATH_X): made this only do the check on unix platforms. + +2002-03-12 Jeff Hobbs + + * README.txt: updated to reflect fewer files + +2002-03-06 Jeff Hobbs + + * config.guess (removed): + * config.sub (removed): removed unnecessary files + + * installFile.tcl (removed): + * mkinstalldirs (removed): these aren't really necessary for + making TEA work + + * tcl.m4 (SC_PUBLIC_TCL_HEADERS, SC_PUBLIC_TK_HEADERS): don't + check /usr(/local)/include for includes on Windows when not using + gcc + +2002-03-05 Jeff Hobbs + + * tcl.m4: added warnings on Windows, removed RELPATH define and + added TCL_LIBS to MAKE_LIB macro. + + This import represents 2.0.0, or a new start at attempting to + make TEA much easier for C extension developers. + + **** moved from tclpro project to core tcl project, **** + **** renamed to 'tclconfig' **** + +2001-03-15 Karl Lehenbauer + + * installFile.tcl: Added updating of the modification time of + the target file whether we overwrote it or decided that it + hadn't changed. This was necessary for us to be able to + determine whether or not a module install touched the file. + +2001-03-08 Karl Lehenbauer + + * installFile.tcl: Added support for converting new-style (1.1+) + Cygnus drive paths to Tcl-style. + +2001-01-15 + + * tcl.m4: Added FreeBSD clause. + +2001-01-03 + + * tcl.m4: Fixed typo in SC_LIB_SPEC where it is checking + for exec-prefix. + +2000-12-01 + + * tcl.m4: Concatenated most of the Ajuba acsite.m4 file + so we don't need to modify the autoconf installation. + * config.guess: + * config.sub: + * installFile.tcl: + Added files from the itcl config subdirectory, + which should go away. + +2000-7-29 + + * Fixed the use of TCL_SRC_DIR and TK_SRC_DIR within + TCL_PRIVATE_INCLUDES and TK_PRIVATE_INCLUDES to match their recent + change from $(srcdir) to $(srcdir)/.. diff --git a/unix/tclconfig/README.txt b/unix/tclconfig/README.txt new file mode 100644 index 0000000..59b5a3e --- /dev/null +++ b/unix/tclconfig/README.txt @@ -0,0 +1,26 @@ +These files comprise the basic building blocks for a Tcl Extension +Architecture (TEA) extension. For more information on TEA see: + + http://www.tcl.tk/doc/tea/ + +This package is part of the Tcl project at SourceForge, and latest +sources should be available there: + + http://tcl.sourceforge.net/ + +This package is a freely available open source package. You can do +virtually anything you like with it, such as modifying it, redistributing +it, and selling it either in whole or in part. + +CONTENTS +======== +The following is a short description of the files you will find in +the sample extension. + +README.txt This file + +install-sh Program used for copying binaries and script files + to their install locations. + +tcl.m4 Collection of Tcl autoconf macros. Included by a package's + aclocal.m4 to define TEA_* macros. diff --git a/unix/tclconfig/install-sh b/unix/tclconfig/install-sh new file mode 100755 index 0000000..7c34c3f --- /dev/null +++ b/unix/tclconfig/install-sh @@ -0,0 +1,528 @@ +#!/bin/sh +# install - install a program, script, or datafile + +scriptversion=2011-04-20.01; # UTC + +# This originates from X11R5 (mit/util/scripts/install.sh), which was +# later released in X11R6 (xc/config/util/install.sh) with the +# following copyright and license. +# +# Copyright (C) 1994 X Consortium +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to +# deal in the Software without restriction, including without limitation the +# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +# sell copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- +# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +# +# Except as contained in this notice, the name of the X Consortium shall not +# be used in advertising or otherwise to promote the sale, use or other deal- +# ings in this Software without prior written authorization from the X Consor- +# tium. +# +# +# FSF changes to this file are in the public domain. +# +# Calling this script install-sh is preferred over install.sh, to prevent +# `make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# This script is compatible with the BSD install script, but was written +# from scratch. + +nl=' +' +IFS=" "" $nl" + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit=${DOITPROG-} +if test -z "$doit"; then + doit_exec=exec +else + doit_exec=$doit +fi + +# Put in absolute file names if you don't have them in your path; +# or use environment vars. + +chgrpprog=${CHGRPPROG-chgrp} +chmodprog=${CHMODPROG-chmod} +chownprog=${CHOWNPROG-chown} +cmpprog=${CMPPROG-cmp} +cpprog=${CPPROG-cp} +mkdirprog=${MKDIRPROG-mkdir} +mvprog=${MVPROG-mv} +rmprog=${RMPROG-rm} +stripprog=${STRIPPROG-strip} + +posix_glob='?' +initialize_posix_glob=' + test "$posix_glob" != "?" || { + if (set -f) 2>/dev/null; then + posix_glob= + else + posix_glob=: + fi + } +' + +posix_mkdir= + +# Desired mode of installed file. +mode=0755 + +chgrpcmd= +chmodcmd=$chmodprog +chowncmd= +mvcmd=$mvprog +rmcmd="$rmprog -f" +stripcmd= + +src= +dst= +dir_arg= +dst_arg= + +copy_on_change=false +no_target_directory= + +usage="\ +Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE + or: $0 [OPTION]... SRCFILES... DIRECTORY + or: $0 [OPTION]... -t DIRECTORY SRCFILES... + or: $0 [OPTION]... -d DIRECTORIES... + +In the 1st form, copy SRCFILE to DSTFILE. +In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. +In the 4th, create DIRECTORIES. + +Options: + --help display this help and exit. + --version display version info and exit. + + -c (ignored) + -C install only if different (preserve the last data modification time) + -d create directories instead of installing files. + -g GROUP $chgrpprog installed files to GROUP. + -m MODE $chmodprog installed files to MODE. + -o USER $chownprog installed files to USER. + -s $stripprog installed files. + -S $stripprog installed files. + -t DIRECTORY install into DIRECTORY. + -T report an error if DSTFILE is a directory. + +Environment variables override the default commands: + CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG + RMPROG STRIPPROG +" + +while test $# -ne 0; do + case $1 in + -c) ;; + + -C) copy_on_change=true;; + + -d) dir_arg=true;; + + -g) chgrpcmd="$chgrpprog $2" + shift;; + + --help) echo "$usage"; exit $?;; + + -m) mode=$2 + case $mode in + *' '* | *' '* | *' +'* | *'*'* | *'?'* | *'['*) + echo "$0: invalid mode: $mode" >&2 + exit 1;; + esac + shift;; + + -o) chowncmd="$chownprog $2" + shift;; + + -s) stripcmd=$stripprog;; + + -S) stripcmd="$stripprog $2" + shift;; + + -t) dst_arg=$2 + shift;; + + -T) no_target_directory=true;; + + --version) echo "$0 $scriptversion"; exit $?;; + + --) shift + break;; + + -*) echo "$0: invalid option: $1" >&2 + exit 1;; + + *) break;; + esac + shift +done + +if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then + # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dst_arg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dst_arg" + shift # fnord + fi + shift # arg + dst_arg=$arg + done +fi + +if test $# -eq 0; then + if test -z "$dir_arg"; then + echo "$0: no input file specified." >&2 + exit 1 + fi + # It's OK to call `install-sh -d' without argument. + # This can happen when creating conditional directories. + exit 0 +fi + +if test -z "$dir_arg"; then + do_exit='(exit $ret); exit $ret' + trap "ret=129; $do_exit" 1 + trap "ret=130; $do_exit" 2 + trap "ret=141; $do_exit" 13 + trap "ret=143; $do_exit" 15 + + # Set umask so as not to create temps with too-generous modes. + # However, 'strip' requires both read and write access to temps. + case $mode in + # Optimize common cases. + *644) cp_umask=133;; + *755) cp_umask=22;; + + *[0-7]) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw='% 200' + fi + cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; + *) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw=,u+rw + fi + cp_umask=$mode$u_plus_rw;; + esac +fi + +for src +do + # Protect names starting with `-'. + case $src in + -*) src=./$src;; + esac + + if test -n "$dir_arg"; then + dst=$src + dstdir=$dst + test -d "$dstdir" + dstdir_status=$? + else + + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + if test ! -f "$src" && test ! -d "$src"; then + echo "$0: $src does not exist." >&2 + exit 1 + fi + + if test -z "$dst_arg"; then + echo "$0: no destination specified." >&2 + exit 1 + fi + + dst=$dst_arg + # Protect names starting with `-'. + case $dst in + -*) dst=./$dst;; + esac + + # If destination is a directory, append the input filename; won't work + # if double slashes aren't ignored. + if test -d "$dst"; then + if test -n "$no_target_directory"; then + echo "$0: $dst_arg: Is a directory" >&2 + exit 1 + fi + dstdir=$dst + dst=$dstdir/`basename "$src"` + dstdir_status=0 + else + # Prefer dirname, but fall back on a substitute if dirname fails. + dstdir=` + (dirname "$dst") 2>/dev/null || + expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$dst" : 'X\(//\)[^/]' \| \ + X"$dst" : 'X\(//\)$' \| \ + X"$dst" : 'X\(/\)' \| . 2>/dev/null || + echo X"$dst" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q' + ` + + test -d "$dstdir" + dstdir_status=$? + fi + fi + + obsolete_mkdir_used=false + + if test $dstdir_status != 0; then + case $posix_mkdir in + '') + # Create intermediate dirs using mode 755 as modified by the umask. + # This is like FreeBSD 'install' as of 1997-10-28. + umask=`umask` + case $stripcmd.$umask in + # Optimize common cases. + *[2367][2367]) mkdir_umask=$umask;; + .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; + + *[0-7]) + mkdir_umask=`expr $umask + 22 \ + - $umask % 100 % 40 + $umask % 20 \ + - $umask % 10 % 4 + $umask % 2 + `;; + *) mkdir_umask=$umask,go-w;; + esac + + # With -d, create the new directory with the user-specified mode. + # Otherwise, rely on $mkdir_umask. + if test -n "$dir_arg"; then + mkdir_mode=-m$mode + else + mkdir_mode= + fi + + posix_mkdir=false + case $umask in + *[123567][0-7][0-7]) + # POSIX mkdir -p sets u+wx bits regardless of umask, which + # is incompatible with FreeBSD 'install' when (umask & 300) != 0. + ;; + *) + tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ + trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 + + if (umask $mkdir_umask && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 + then + if test -z "$dir_arg" || { + # Check for POSIX incompatibilities with -m. + # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or + # other-writeable bit of parent directory when it shouldn't. + # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. + ls_ld_tmpdir=`ls -ld "$tmpdir"` + case $ls_ld_tmpdir in + d????-?r-*) different_mode=700;; + d????-?--*) different_mode=755;; + *) false;; + esac && + $mkdirprog -m$different_mode -p -- "$tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$tmpdir"` + test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" + } + } + then posix_mkdir=: + fi + rmdir "$tmpdir/d" "$tmpdir" + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null + fi + trap '' 0;; + esac;; + esac + + if + $posix_mkdir && ( + umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" + ) + then : + else + + # The umask is ridiculous, or mkdir does not conform to POSIX, + # or it failed possibly due to a race condition. Create the + # directory the slow way, step by step, checking for races as we go. + + case $dstdir in + /*) prefix='/';; + -*) prefix='./';; + *) prefix='';; + esac + + eval "$initialize_posix_glob" + + oIFS=$IFS + IFS=/ + $posix_glob set -f + set fnord $dstdir + shift + $posix_glob set +f + IFS=$oIFS + + prefixes= + + for d + do + test -z "$d" && continue + + prefix=$prefix$d + if test -d "$prefix"; then + prefixes= + else + if $posix_mkdir; then + (umask=$mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break + # Don't fail if two instances are running concurrently. + test -d "$prefix" || exit 1 + else + case $prefix in + *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; + *) qprefix=$prefix;; + esac + prefixes="$prefixes '$qprefix'" + fi + fi + prefix=$prefix/ + done + + if test -n "$prefixes"; then + # Don't fail if two instances are running concurrently. + (umask $mkdir_umask && + eval "\$doit_exec \$mkdirprog $prefixes") || + test -d "$dstdir" || exit 1 + obsolete_mkdir_used=true + fi + fi + fi + + if test -n "$dir_arg"; then + { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && + { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || + test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 + else + + # Make a couple of temp file names in the proper directory. + dsttmp=$dstdir/_inst.$$_ + rmtmp=$dstdir/_rm.$$_ + + # Trap to clean up those temp files at exit. + trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 + + # Copy the file name to the temp name. + (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && + + # and set any options; do chmod last to preserve setuid bits. + # + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $cpprog $src $dsttmp" command. + # + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && + { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && + { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && + + # If -C, don't bother to copy if it wouldn't change the file. + if $copy_on_change && + old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && + new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && + + eval "$initialize_posix_glob" && + $posix_glob set -f && + set X $old && old=:$2:$4:$5:$6 && + set X $new && new=:$2:$4:$5:$6 && + $posix_glob set +f && + + test "$old" = "$new" && + $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 + then + rm -f "$dsttmp" + else + # Rename the file to the real destination. + $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || + + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + { + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + test ! -f "$dst" || + $doit $rmcmd -f "$dst" 2>/dev/null || + { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && + { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } + } || + { echo "$0: cannot unlink or rename $dst" >&2 + (exit 1); exit 1 + } + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dst" + } + fi || exit 1 + + trap '' 0 + fi +done + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/unix/tclconfig/tcl.m4 b/unix/tclconfig/tcl.m4 new file mode 100644 index 0000000..8bc9c83 --- /dev/null +++ b/unix/tclconfig/tcl.m4 @@ -0,0 +1,4150 @@ +# tcl.m4 -- +# +# This file provides a set of autoconf macros to help TEA-enable +# a Tcl extension. +# +# Copyright (c) 1999-2000 Ajuba Solutions. +# Copyright (c) 2002-2005 ActiveState Corporation. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. + +AC_PREREQ(2.57) + +dnl TEA extensions pass us the version of TEA they think they +dnl are compatible with (must be set in TEA_INIT below) +dnl TEA_VERSION="3.9" + +# Possible values for key variables defined: +# +# TEA_WINDOWINGSYSTEM - win32 aqua x11 (mirrors 'tk windowingsystem') +# TEA_PLATFORM - windows unix +# + +#------------------------------------------------------------------------ +# TEA_PATH_TCLCONFIG -- +# +# Locate the tclConfig.sh file and perform a sanity check on +# the Tcl compile flags +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --with-tcl=... +# +# Defines the following vars: +# TCL_BIN_DIR Full path to the directory containing +# the tclConfig.sh file +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PATH_TCLCONFIG], [ + dnl TEA specific: Make sure we are initialized + AC_REQUIRE([TEA_INIT]) + # + # Ok, lets find the tcl configuration + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-tcl + # + + if test x"${no_tcl}" = x ; then + # we reset no_tcl in case something fails here + no_tcl=true + AC_ARG_WITH(tcl, + AC_HELP_STRING([--with-tcl], + [directory containing tcl configuration (tclConfig.sh)]), + with_tclconfig="${withval}") + AC_MSG_CHECKING([for Tcl configuration]) + AC_CACHE_VAL(ac_cv_c_tclconfig,[ + + # First check to see if --with-tcl was specified. + if test x"${with_tclconfig}" != x ; then + case "${with_tclconfig}" in + */tclConfig.sh ) + if test -f "${with_tclconfig}"; then + AC_MSG_WARN([--with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself]) + with_tclconfig="`echo "${with_tclconfig}" | sed 's!/tclConfig\.sh$!!'`" + fi ;; + esac + if test -f "${with_tclconfig}/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd "${with_tclconfig}"; pwd)`" + else + AC_MSG_ERROR([${with_tclconfig} directory doesn't contain tclConfig.sh]) + fi + fi + + # then check for a private Tcl installation + if test x"${ac_cv_c_tclconfig}" = x ; then + for i in \ + ../tcl \ + `ls -dr ../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../tcl[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../tcl[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../tcl \ + `ls -dr ../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../../tcl[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../tcl[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../../tcl \ + `ls -dr ../../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../../../tcl[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do + if test "${TEA_PLATFORM}" = "windows" \ + -a -f "$i/win/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i/win; pwd)`" + break + fi + if test -f "$i/unix/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i/unix; pwd)`" + break + fi + done + fi + + # on Darwin, check in Framework installation locations + if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tclconfig}" = x ; then + for i in `ls -d ~/Library/Frameworks 2>/dev/null` \ + `ls -d /Library/Frameworks 2>/dev/null` \ + `ls -d /Network/Library/Frameworks 2>/dev/null` \ + `ls -d /System/Library/Frameworks 2>/dev/null` \ + ; do + if test -f "$i/Tcl.framework/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i/Tcl.framework; pwd)`" + break + fi + done + fi + + # TEA specific: on Windows, check in common installation locations + if test "${TEA_PLATFORM}" = "windows" \ + -a x"${ac_cv_c_tclconfig}" = x ; then + for i in `ls -d C:/Tcl/lib 2>/dev/null` \ + `ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \ + ; do + if test -f "$i/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i; pwd)`" + break + fi + done + fi + + # check in a few common install locations + if test x"${ac_cv_c_tclconfig}" = x ; then + for i in `ls -d ${libdir} 2>/dev/null` \ + `ls -d ${exec_prefix}/lib 2>/dev/null` \ + `ls -d ${prefix}/lib 2>/dev/null` \ + `ls -d /usr/local/lib 2>/dev/null` \ + `ls -d /usr/contrib/lib 2>/dev/null` \ + `ls -d /usr/lib 2>/dev/null` \ + `ls -d /usr/lib64 2>/dev/null` \ + ; do + if test -f "$i/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i; pwd)`" + break + fi + done + fi + + # check in a few other private locations + if test x"${ac_cv_c_tclconfig}" = x ; then + for i in \ + ${srcdir}/../tcl \ + `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do + if test "${TEA_PLATFORM}" = "windows" \ + -a -f "$i/win/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i/win; pwd)`" + break + fi + if test -f "$i/unix/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i/unix; pwd)`" + break + fi + done + fi + ]) + + if test x"${ac_cv_c_tclconfig}" = x ; then + TCL_BIN_DIR="# no Tcl configs found" + AC_MSG_ERROR([Can't find Tcl configuration definitions. Use --with-tcl to specify a directory containing tclConfig.sh]) + else + no_tcl= + TCL_BIN_DIR="${ac_cv_c_tclconfig}" + AC_MSG_RESULT([found ${TCL_BIN_DIR}/tclConfig.sh]) + fi + fi +]) + +#------------------------------------------------------------------------ +# TEA_PATH_TKCONFIG -- +# +# Locate the tkConfig.sh file +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --with-tk=... +# +# Defines the following vars: +# TK_BIN_DIR Full path to the directory containing +# the tkConfig.sh file +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PATH_TKCONFIG], [ + # + # Ok, lets find the tk configuration + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-tk + # + + if test x"${no_tk}" = x ; then + # we reset no_tk in case something fails here + no_tk=true + AC_ARG_WITH(tk, + AC_HELP_STRING([--with-tk], + [directory containing tk configuration (tkConfig.sh)]), + with_tkconfig="${withval}") + AC_MSG_CHECKING([for Tk configuration]) + AC_CACHE_VAL(ac_cv_c_tkconfig,[ + + # First check to see if --with-tkconfig was specified. + if test x"${with_tkconfig}" != x ; then + case "${with_tkconfig}" in + */tkConfig.sh ) + if test -f "${with_tkconfig}"; then + AC_MSG_WARN([--with-tk argument should refer to directory containing tkConfig.sh, not to tkConfig.sh itself]) + with_tkconfig="`echo "${with_tkconfig}" | sed 's!/tkConfig\.sh$!!'`" + fi ;; + esac + if test -f "${with_tkconfig}/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd "${with_tkconfig}"; pwd)`" + else + AC_MSG_ERROR([${with_tkconfig} directory doesn't contain tkConfig.sh]) + fi + fi + + # then check for a private Tk library + if test x"${ac_cv_c_tkconfig}" = x ; then + for i in \ + ../tk \ + `ls -dr ../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../tk[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../tk[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../tk \ + `ls -dr ../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../../tk[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../tk[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../../tk \ + `ls -dr ../../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../../../tk[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do + if test "${TEA_PLATFORM}" = "windows" \ + -a -f "$i/win/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i/win; pwd)`" + break + fi + if test -f "$i/unix/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i/unix; pwd)`" + break + fi + done + fi + + # on Darwin, check in Framework installation locations + if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tkconfig}" = x ; then + for i in `ls -d ~/Library/Frameworks 2>/dev/null` \ + `ls -d /Library/Frameworks 2>/dev/null` \ + `ls -d /Network/Library/Frameworks 2>/dev/null` \ + `ls -d /System/Library/Frameworks 2>/dev/null` \ + ; do + if test -f "$i/Tk.framework/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i/Tk.framework; pwd)`" + break + fi + done + fi + + # check in a few common install locations + if test x"${ac_cv_c_tkconfig}" = x ; then + for i in `ls -d ${libdir} 2>/dev/null` \ + `ls -d ${exec_prefix}/lib 2>/dev/null` \ + `ls -d ${prefix}/lib 2>/dev/null` \ + `ls -d /usr/local/lib 2>/dev/null` \ + `ls -d /usr/contrib/lib 2>/dev/null` \ + `ls -d /usr/lib 2>/dev/null` \ + `ls -d /usr/lib64 2>/dev/null` \ + ; do + if test -f "$i/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i; pwd)`" + break + fi + done + fi + + # TEA specific: on Windows, check in common installation locations + if test "${TEA_PLATFORM}" = "windows" \ + -a x"${ac_cv_c_tkconfig}" = x ; then + for i in `ls -d C:/Tcl/lib 2>/dev/null` \ + `ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \ + ; do + if test -f "$i/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i; pwd)`" + break + fi + done + fi + + # check in a few other private locations + if test x"${ac_cv_c_tkconfig}" = x ; then + for i in \ + ${srcdir}/../tk \ + `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do + if test "${TEA_PLATFORM}" = "windows" \ + -a -f "$i/win/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i/win; pwd)`" + break + fi + if test -f "$i/unix/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i/unix; pwd)`" + break + fi + done + fi + ]) + + if test x"${ac_cv_c_tkconfig}" = x ; then + TK_BIN_DIR="# no Tk configs found" + AC_MSG_ERROR([Can't find Tk configuration definitions. Use --with-tk to specify a directory containing tkConfig.sh]) + else + no_tk= + TK_BIN_DIR="${ac_cv_c_tkconfig}" + AC_MSG_RESULT([found ${TK_BIN_DIR}/tkConfig.sh]) + fi + fi +]) + +#------------------------------------------------------------------------ +# TEA_LOAD_TCLCONFIG -- +# +# Load the tclConfig.sh file +# +# Arguments: +# +# Requires the following vars to be set: +# TCL_BIN_DIR +# +# Results: +# +# Substitutes the following vars: +# TCL_BIN_DIR +# TCL_SRC_DIR +# TCL_LIB_FILE +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_LOAD_TCLCONFIG], [ + AC_MSG_CHECKING([for existence of ${TCL_BIN_DIR}/tclConfig.sh]) + + if test -f "${TCL_BIN_DIR}/tclConfig.sh" ; then + AC_MSG_RESULT([loading]) + . "${TCL_BIN_DIR}/tclConfig.sh" + else + AC_MSG_RESULT([could not find ${TCL_BIN_DIR}/tclConfig.sh]) + fi + + # eval is required to do the TCL_DBGX substitution + eval "TCL_LIB_FILE=\"${TCL_LIB_FILE}\"" + eval "TCL_STUB_LIB_FILE=\"${TCL_STUB_LIB_FILE}\"" + + # If the TCL_BIN_DIR is the build directory (not the install directory), + # then set the common variable name to the value of the build variables. + # For example, the variable TCL_LIB_SPEC will be set to the value + # of TCL_BUILD_LIB_SPEC. An extension should make use of TCL_LIB_SPEC + # instead of TCL_BUILD_LIB_SPEC since it will work with both an + # installed and uninstalled version of Tcl. + if test -f "${TCL_BIN_DIR}/Makefile" ; then + TCL_LIB_SPEC="${TCL_BUILD_LIB_SPEC}" + TCL_STUB_LIB_SPEC="${TCL_BUILD_STUB_LIB_SPEC}" + TCL_STUB_LIB_PATH="${TCL_BUILD_STUB_LIB_PATH}" + elif test "`uname -s`" = "Darwin"; then + # If Tcl was built as a framework, attempt to use the libraries + # from the framework at the given location so that linking works + # against Tcl.framework installed in an arbitrary location. + case ${TCL_DEFS} in + *TCL_FRAMEWORK*) + if test -f "${TCL_BIN_DIR}/${TCL_LIB_FILE}"; then + for i in "`cd "${TCL_BIN_DIR}"; pwd`" \ + "`cd "${TCL_BIN_DIR}"/../..; pwd`"; do + if test "`basename "$i"`" = "${TCL_LIB_FILE}.framework"; then + TCL_LIB_SPEC="-F`dirname "$i" | sed -e 's/ /\\\\ /g'` -framework ${TCL_LIB_FILE}" + break + fi + done + fi + if test -f "${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}"; then + TCL_STUB_LIB_SPEC="-L`echo "${TCL_BIN_DIR}" | sed -e 's/ /\\\\ /g'` ${TCL_STUB_LIB_FLAG}" + TCL_STUB_LIB_PATH="${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}" + fi + ;; + esac + fi + + # eval is required to do the TCL_DBGX substitution + eval "TCL_LIB_FLAG=\"${TCL_LIB_FLAG}\"" + eval "TCL_LIB_SPEC=\"${TCL_LIB_SPEC}\"" + eval "TCL_STUB_LIB_FLAG=\"${TCL_STUB_LIB_FLAG}\"" + eval "TCL_STUB_LIB_SPEC=\"${TCL_STUB_LIB_SPEC}\"" + + AC_SUBST(TCL_VERSION) + AC_SUBST(TCL_PATCH_LEVEL) + AC_SUBST(TCL_BIN_DIR) + AC_SUBST(TCL_SRC_DIR) + + AC_SUBST(TCL_LIB_FILE) + AC_SUBST(TCL_LIB_FLAG) + AC_SUBST(TCL_LIB_SPEC) + + AC_SUBST(TCL_STUB_LIB_FILE) + AC_SUBST(TCL_STUB_LIB_FLAG) + AC_SUBST(TCL_STUB_LIB_SPEC) + + AC_MSG_CHECKING([platform]) + hold_cc=$CC; CC="$TCL_CC" + AC_TRY_COMPILE(,[ + #ifdef _WIN32 + #error win32 + #endif + ], TEA_PLATFORM="unix", + TEA_PLATFORM="windows" + ) + CC=$hold_cc + AC_MSG_RESULT($TEA_PLATFORM) + + # The BUILD_$pkg is to define the correct extern storage class + # handling when making this package + AC_DEFINE_UNQUOTED(BUILD_${PACKAGE_NAME}, [], + [Building extension source?]) + # Do this here as we have fully defined TEA_PLATFORM now + if test "${TEA_PLATFORM}" = "windows" ; then + EXEEXT=".exe" + CLEANFILES="$CLEANFILES *.lib *.dll *.pdb *.exp" + fi + + # TEA specific: + AC_SUBST(CLEANFILES) + AC_SUBST(TCL_LIBS) + AC_SUBST(TCL_DEFS) + AC_SUBST(TCL_EXTRA_CFLAGS) + AC_SUBST(TCL_LD_FLAGS) + AC_SUBST(TCL_SHLIB_LD_LIBS) +]) + +#------------------------------------------------------------------------ +# TEA_LOAD_TKCONFIG -- +# +# Load the tkConfig.sh file +# +# Arguments: +# +# Requires the following vars to be set: +# TK_BIN_DIR +# +# Results: +# +# Sets the following vars that should be in tkConfig.sh: +# TK_BIN_DIR +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_LOAD_TKCONFIG], [ + AC_MSG_CHECKING([for existence of ${TK_BIN_DIR}/tkConfig.sh]) + + if test -f "${TK_BIN_DIR}/tkConfig.sh" ; then + AC_MSG_RESULT([loading]) + . "${TK_BIN_DIR}/tkConfig.sh" + else + AC_MSG_RESULT([could not find ${TK_BIN_DIR}/tkConfig.sh]) + fi + + # eval is required to do the TK_DBGX substitution + eval "TK_LIB_FILE=\"${TK_LIB_FILE}\"" + eval "TK_STUB_LIB_FILE=\"${TK_STUB_LIB_FILE}\"" + + # If the TK_BIN_DIR is the build directory (not the install directory), + # then set the common variable name to the value of the build variables. + # For example, the variable TK_LIB_SPEC will be set to the value + # of TK_BUILD_LIB_SPEC. An extension should make use of TK_LIB_SPEC + # instead of TK_BUILD_LIB_SPEC since it will work with both an + # installed and uninstalled version of Tcl. + if test -f "${TK_BIN_DIR}/Makefile" ; then + TK_LIB_SPEC="${TK_BUILD_LIB_SPEC}" + TK_STUB_LIB_SPEC="${TK_BUILD_STUB_LIB_SPEC}" + TK_STUB_LIB_PATH="${TK_BUILD_STUB_LIB_PATH}" + elif test "`uname -s`" = "Darwin"; then + # If Tk was built as a framework, attempt to use the libraries + # from the framework at the given location so that linking works + # against Tk.framework installed in an arbitrary location. + case ${TK_DEFS} in + *TK_FRAMEWORK*) + if test -f "${TK_BIN_DIR}/${TK_LIB_FILE}"; then + for i in "`cd "${TK_BIN_DIR}"; pwd`" \ + "`cd "${TK_BIN_DIR}"/../..; pwd`"; do + if test "`basename "$i"`" = "${TK_LIB_FILE}.framework"; then + TK_LIB_SPEC="-F`dirname "$i" | sed -e 's/ /\\\\ /g'` -framework ${TK_LIB_FILE}" + break + fi + done + fi + if test -f "${TK_BIN_DIR}/${TK_STUB_LIB_FILE}"; then + TK_STUB_LIB_SPEC="-L` echo "${TK_BIN_DIR}" | sed -e 's/ /\\\\ /g'` ${TK_STUB_LIB_FLAG}" + TK_STUB_LIB_PATH="${TK_BIN_DIR}/${TK_STUB_LIB_FILE}" + fi + ;; + esac + fi + + # eval is required to do the TK_DBGX substitution + eval "TK_LIB_FLAG=\"${TK_LIB_FLAG}\"" + eval "TK_LIB_SPEC=\"${TK_LIB_SPEC}\"" + eval "TK_STUB_LIB_FLAG=\"${TK_STUB_LIB_FLAG}\"" + eval "TK_STUB_LIB_SPEC=\"${TK_STUB_LIB_SPEC}\"" + + # TEA specific: Ensure windowingsystem is defined + if test "${TEA_PLATFORM}" = "unix" ; then + case ${TK_DEFS} in + *MAC_OSX_TK*) + AC_DEFINE(MAC_OSX_TK, 1, [Are we building against Mac OS X TkAqua?]) + TEA_WINDOWINGSYSTEM="aqua" + ;; + *) + TEA_WINDOWINGSYSTEM="x11" + ;; + esac + elif test "${TEA_PLATFORM}" = "windows" ; then + TEA_WINDOWINGSYSTEM="win32" + fi + + AC_SUBST(TK_VERSION) + AC_SUBST(TK_BIN_DIR) + AC_SUBST(TK_SRC_DIR) + + AC_SUBST(TK_LIB_FILE) + AC_SUBST(TK_LIB_FLAG) + AC_SUBST(TK_LIB_SPEC) + + AC_SUBST(TK_STUB_LIB_FILE) + AC_SUBST(TK_STUB_LIB_FLAG) + AC_SUBST(TK_STUB_LIB_SPEC) + + # TEA specific: + AC_SUBST(TK_LIBS) + AC_SUBST(TK_XINCLUDES) +]) + +#------------------------------------------------------------------------ +# TEA_PROG_TCLSH +# Determine the fully qualified path name of the tclsh executable +# in the Tcl build directory or the tclsh installed in a bin +# directory. This macro will correctly determine the name +# of the tclsh executable even if tclsh has not yet been +# built in the build directory. The tclsh found is always +# associated with a tclConfig.sh file. This tclsh should be used +# only for running extension test cases. It should never be +# or generation of files (like pkgIndex.tcl) at build time. +# +# Arguments: +# none +# +# Results: +# Substitutes the following vars: +# TCLSH_PROG +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PROG_TCLSH], [ + AC_MSG_CHECKING([for tclsh]) + if test -f "${TCL_BIN_DIR}/Makefile" ; then + # tclConfig.sh is in Tcl build directory + if test "${TEA_PLATFORM}" = "windows"; then + TCLSH_PROG="${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}" + else + TCLSH_PROG="${TCL_BIN_DIR}/tclsh" + fi + else + # tclConfig.sh is in install location + if test "${TEA_PLATFORM}" = "windows"; then + TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}" + else + TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}.${TCL_MINOR_VERSION}${TCL_DBGX}" + fi + list="`ls -d ${TCL_BIN_DIR}/../bin 2>/dev/null` \ + `ls -d ${TCL_BIN_DIR}/.. 2>/dev/null` \ + `ls -d ${TCL_PREFIX}/bin 2>/dev/null`" + for i in $list ; do + if test -f "$i/${TCLSH_PROG}" ; then + REAL_TCL_BIN_DIR="`cd "$i"; pwd`/" + break + fi + done + TCLSH_PROG="${REAL_TCL_BIN_DIR}${TCLSH_PROG}" + fi + AC_MSG_RESULT([${TCLSH_PROG}]) + AC_SUBST(TCLSH_PROG) +]) + +#------------------------------------------------------------------------ +# TEA_PROG_WISH +# Determine the fully qualified path name of the wish executable +# in the Tk build directory or the wish installed in a bin +# directory. This macro will correctly determine the name +# of the wish executable even if wish has not yet been +# built in the build directory. The wish found is always +# associated with a tkConfig.sh file. This wish should be used +# only for running extension test cases. It should never be +# or generation of files (like pkgIndex.tcl) at build time. +# +# Arguments: +# none +# +# Results: +# Substitutes the following vars: +# WISH_PROG +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PROG_WISH], [ + AC_MSG_CHECKING([for wish]) + if test -f "${TK_BIN_DIR}/Makefile" ; then + # tkConfig.sh is in Tk build directory + if test "${TEA_PLATFORM}" = "windows"; then + WISH_PROG="${TK_BIN_DIR}/wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}${EXEEXT}" + else + WISH_PROG="${TK_BIN_DIR}/wish" + fi + else + # tkConfig.sh is in install location + if test "${TEA_PLATFORM}" = "windows"; then + WISH_PROG="wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}${EXEEXT}" + else + WISH_PROG="wish${TK_MAJOR_VERSION}.${TK_MINOR_VERSION}${TK_DBGX}" + fi + list="`ls -d ${TK_BIN_DIR}/../bin 2>/dev/null` \ + `ls -d ${TK_BIN_DIR}/.. 2>/dev/null` \ + `ls -d ${TK_PREFIX}/bin 2>/dev/null`" + for i in $list ; do + if test -f "$i/${WISH_PROG}" ; then + REAL_TK_BIN_DIR="`cd "$i"; pwd`/" + break + fi + done + WISH_PROG="${REAL_TK_BIN_DIR}${WISH_PROG}" + fi + AC_MSG_RESULT([${WISH_PROG}]) + AC_SUBST(WISH_PROG) +]) + +#------------------------------------------------------------------------ +# TEA_ENABLE_SHARED -- +# +# Allows the building of shared libraries +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --enable-shared=yes|no +# +# Defines the following vars: +# STATIC_BUILD Used for building import/export libraries +# on Windows. +# +# Sets the following vars: +# SHARED_BUILD Value of 1 or 0 +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_ENABLE_SHARED], [ + AC_MSG_CHECKING([how to build libraries]) + AC_ARG_ENABLE(shared, + AC_HELP_STRING([--enable-shared], + [build and link with shared libraries (default: on)]), + [tcl_ok=$enableval], [tcl_ok=yes]) + + if test "${enable_shared+set}" = set; then + enableval="$enable_shared" + tcl_ok=$enableval + else + tcl_ok=yes + fi + + if test "$tcl_ok" = "yes" ; then + AC_MSG_RESULT([shared]) + SHARED_BUILD=1 + else + AC_MSG_RESULT([static]) + SHARED_BUILD=0 + AC_DEFINE(STATIC_BUILD, 1, [Is this a static build?]) + fi + AC_SUBST(SHARED_BUILD) +]) + +#------------------------------------------------------------------------ +# TEA_ENABLE_THREADS -- +# +# Specify if thread support should be enabled. If "yes" is specified +# as an arg (optional), threads are enabled by default, "no" means +# threads are disabled. "yes" is the default. +# +# TCL_THREADS is checked so that if you are compiling an extension +# against a threaded core, your extension must be compiled threaded +# as well. +# +# Note that it is legal to have a thread enabled extension run in a +# threaded or non-threaded Tcl core, but a non-threaded extension may +# only run in a non-threaded Tcl core. +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --enable-threads +# +# Sets the following vars: +# THREADS_LIBS Thread library(s) +# +# Defines the following vars: +# TCL_THREADS +# _REENTRANT +# _THREAD_SAFE +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_ENABLE_THREADS], [ + AC_ARG_ENABLE(threads, + AC_HELP_STRING([--enable-threads], + [build with threads]), + [tcl_ok=$enableval], [tcl_ok=yes]) + + if test "${enable_threads+set}" = set; then + enableval="$enable_threads" + tcl_ok=$enableval + else + tcl_ok=yes + fi + + if test "$tcl_ok" = "yes" -o "${TCL_THREADS}" = 1; then + TCL_THREADS=1 + + if test "${TEA_PLATFORM}" != "windows" ; then + # We are always OK on Windows, so check what this platform wants: + + # USE_THREAD_ALLOC tells us to try the special thread-based + # allocator that significantly reduces lock contention + AC_DEFINE(USE_THREAD_ALLOC, 1, + [Do we want to use the threaded memory allocator?]) + AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?]) + if test "`uname -s`" = "SunOS" ; then + AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1, + [Do we really want to follow the standard? Yes we do!]) + fi + AC_DEFINE(_THREAD_SAFE, 1, [Do we want the thread-safe OS API?]) + AC_CHECK_LIB(pthread,pthread_mutex_init,tcl_ok=yes,tcl_ok=no) + if test "$tcl_ok" = "no"; then + # Check a little harder for __pthread_mutex_init in the same + # library, as some systems hide it there until pthread.h is + # defined. We could alternatively do an AC_TRY_COMPILE with + # pthread.h, but that will work with libpthread really doesn't + # exist, like AIX 4.2. [Bug: 4359] + AC_CHECK_LIB(pthread, __pthread_mutex_init, + tcl_ok=yes, tcl_ok=no) + fi + + if test "$tcl_ok" = "yes"; then + # The space is needed + THREADS_LIBS=" -lpthread" + else + AC_CHECK_LIB(pthreads, pthread_mutex_init, + tcl_ok=yes, tcl_ok=no) + if test "$tcl_ok" = "yes"; then + # The space is needed + THREADS_LIBS=" -lpthreads" + else + AC_CHECK_LIB(c, pthread_mutex_init, + tcl_ok=yes, tcl_ok=no) + if test "$tcl_ok" = "no"; then + AC_CHECK_LIB(c_r, pthread_mutex_init, + tcl_ok=yes, tcl_ok=no) + if test "$tcl_ok" = "yes"; then + # The space is needed + THREADS_LIBS=" -pthread" + else + TCL_THREADS=0 + AC_MSG_WARN([Do not know how to find pthread lib on your system - thread support disabled]) + fi + fi + fi + fi + fi + else + TCL_THREADS=0 + fi + # Do checking message here to not mess up interleaved configure output + AC_MSG_CHECKING([for building with threads]) + if test "${TCL_THREADS}" = 1; then + AC_DEFINE(TCL_THREADS, 1, [Are we building with threads enabled?]) + AC_MSG_RESULT([yes (default)]) + else + AC_MSG_RESULT([no]) + fi + # TCL_THREADS sanity checking. See if our request for building with + # threads is the same as the way Tcl was built. If not, warn the user. + case ${TCL_DEFS} in + *THREADS=1*) + if test "${TCL_THREADS}" = "0"; then + AC_MSG_WARN([ + Building ${PACKAGE_NAME} without threads enabled, but building against Tcl + that IS thread-enabled. It is recommended to use --enable-threads.]) + fi + ;; + *) + if test "${TCL_THREADS}" = "1"; then + AC_MSG_WARN([ + --enable-threads requested, but building against a Tcl that is NOT + thread-enabled. This is an OK configuration that will also run in + a thread-enabled core.]) + fi + ;; + esac + AC_SUBST(TCL_THREADS) +]) + +#------------------------------------------------------------------------ +# TEA_ENABLE_SYMBOLS -- +# +# Specify if debugging symbols should be used. +# Memory (TCL_MEM_DEBUG) debugging can also be enabled. +# +# Arguments: +# none +# +# TEA varies from core Tcl in that C|LDFLAGS_DEFAULT receives +# the value of C|LDFLAGS_OPTIMIZE|DEBUG already substituted. +# Requires the following vars to be set in the Makefile: +# CFLAGS_DEFAULT +# LDFLAGS_DEFAULT +# +# Results: +# +# Adds the following arguments to configure: +# --enable-symbols +# +# Defines the following vars: +# CFLAGS_DEFAULT Sets to $(CFLAGS_DEBUG) if true +# Sets to "$(CFLAGS_OPTIMIZE) -DNDEBUG" if false +# LDFLAGS_DEFAULT Sets to $(LDFLAGS_DEBUG) if true +# Sets to $(LDFLAGS_OPTIMIZE) if false +# DBGX Formerly used as debug library extension; +# always blank now. +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_ENABLE_SYMBOLS], [ + dnl TEA specific: Make sure we are initialized + AC_REQUIRE([TEA_CONFIG_CFLAGS]) + AC_MSG_CHECKING([for build with symbols]) + AC_ARG_ENABLE(symbols, + AC_HELP_STRING([--enable-symbols], + [build with debugging symbols (default: off)]), + [tcl_ok=$enableval], [tcl_ok=no]) + DBGX="" + if test "$tcl_ok" = "no"; then + CFLAGS_DEFAULT="${CFLAGS_OPTIMIZE} -DNDEBUG" + LDFLAGS_DEFAULT="${LDFLAGS_OPTIMIZE}" + AC_MSG_RESULT([no]) + else + CFLAGS_DEFAULT="${CFLAGS_DEBUG}" + LDFLAGS_DEFAULT="${LDFLAGS_DEBUG}" + if test "$tcl_ok" = "yes"; then + AC_MSG_RESULT([yes (standard debugging)]) + fi + fi + # TEA specific: + if test "${TEA_PLATFORM}" != "windows" ; then + LDFLAGS_DEFAULT="${LDFLAGS}" + fi + AC_SUBST(CFLAGS_DEFAULT) + AC_SUBST(LDFLAGS_DEFAULT) + AC_SUBST(TCL_DBGX) + + if test "$tcl_ok" = "mem" -o "$tcl_ok" = "all"; then + AC_DEFINE(TCL_MEM_DEBUG, 1, [Is memory debugging enabled?]) + fi + + if test "$tcl_ok" != "yes" -a "$tcl_ok" != "no"; then + if test "$tcl_ok" = "all"; then + AC_MSG_RESULT([enabled symbols mem debugging]) + else + AC_MSG_RESULT([enabled $tcl_ok debugging]) + fi + fi +]) + +#------------------------------------------------------------------------ +# TEA_ENABLE_LANGINFO -- +# +# Allows use of modern nl_langinfo check for better l10n. +# This is only relevant for Unix. +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --enable-langinfo=yes|no (default is yes) +# +# Defines the following vars: +# HAVE_LANGINFO Triggers use of nl_langinfo if defined. +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_ENABLE_LANGINFO], [ + AC_ARG_ENABLE(langinfo, + AC_HELP_STRING([--enable-langinfo], + [use nl_langinfo if possible to determine encoding at startup, otherwise use old heuristic (default: on)]), + [langinfo_ok=$enableval], [langinfo_ok=yes]) + + HAVE_LANGINFO=0 + if test "$langinfo_ok" = "yes"; then + AC_CHECK_HEADER(langinfo.h,[langinfo_ok=yes],[langinfo_ok=no]) + fi + AC_MSG_CHECKING([whether to use nl_langinfo]) + if test "$langinfo_ok" = "yes"; then + AC_CACHE_VAL(tcl_cv_langinfo_h, [ + AC_TRY_COMPILE([#include ], [nl_langinfo(CODESET);], + [tcl_cv_langinfo_h=yes],[tcl_cv_langinfo_h=no])]) + AC_MSG_RESULT([$tcl_cv_langinfo_h]) + if test $tcl_cv_langinfo_h = yes; then + AC_DEFINE(HAVE_LANGINFO, 1, [Do we have nl_langinfo()?]) + fi + else + AC_MSG_RESULT([$langinfo_ok]) + fi +]) + +#-------------------------------------------------------------------- +# TEA_CONFIG_SYSTEM +# +# Determine what the system is (some things cannot be easily checked +# on a feature-driven basis, alas). This can usually be done via the +# "uname" command. +# +# Arguments: +# none +# +# Results: +# Defines the following var: +# +# system - System/platform/version identification code. +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_CONFIG_SYSTEM], [ + AC_CACHE_CHECK([system version], tcl_cv_sys_version, [ + # TEA specific: + if test "${TEA_PLATFORM}" = "windows" ; then + tcl_cv_sys_version=windows + else + tcl_cv_sys_version=`uname -s`-`uname -r` + if test "$?" -ne 0 ; then + AC_MSG_WARN([can't find uname command]) + tcl_cv_sys_version=unknown + else + if test "`uname -s`" = "AIX" ; then + tcl_cv_sys_version=AIX-`uname -v`.`uname -r` + fi + fi + fi + ]) + system=$tcl_cv_sys_version +]) + +#-------------------------------------------------------------------- +# TEA_CONFIG_CFLAGS +# +# Try to determine the proper flags to pass to the compiler +# for building shared libraries and other such nonsense. +# +# Arguments: +# none +# +# Results: +# +# Defines and substitutes the following vars: +# +# DL_OBJS, DL_LIBS - removed for TEA, only needed by core. +# LDFLAGS - Flags to pass to the compiler when linking object +# files into an executable application binary such +# as tclsh. +# LD_SEARCH_FLAGS-Flags to pass to ld, such as "-R /usr/local/tcl/lib", +# that tell the run-time dynamic linker where to look +# for shared libraries such as libtcl.so. Depends on +# the variable LIB_RUNTIME_DIR in the Makefile. Could +# be the same as CC_SEARCH_FLAGS if ${CC} is used to link. +# CC_SEARCH_FLAGS-Flags to pass to ${CC}, such as "-Wl,-rpath,/usr/local/tcl/lib", +# that tell the run-time dynamic linker where to look +# for shared libraries such as libtcl.so. Depends on +# the variable LIB_RUNTIME_DIR in the Makefile. +# SHLIB_CFLAGS - Flags to pass to cc when compiling the components +# of a shared library (may request position-independent +# code, among other things). +# SHLIB_LD - Base command to use for combining object files +# into a shared library. +# SHLIB_LD_LIBS - Dependent libraries for the linker to scan when +# creating shared libraries. This symbol typically +# goes at the end of the "ld" commands that build +# shared libraries. The value of the symbol defaults to +# "${LIBS}" if all of the dependent libraries should +# be specified when creating a shared library. If +# dependent libraries should not be specified (as on +# SunOS 4.x, where they cause the link to fail, or in +# general if Tcl and Tk aren't themselves shared +# libraries), then this symbol has an empty string +# as its value. +# SHLIB_SUFFIX - Suffix to use for the names of dynamically loadable +# extensions. An empty string means we don't know how +# to use shared libraries on this platform. +# LIB_SUFFIX - Specifies everything that comes after the "libfoo" +# in a static or shared library name, using the $PACKAGE_VERSION variable +# to put the version in the right place. This is used +# by platforms that need non-standard library names. +# Examples: ${PACKAGE_VERSION}.so.1.1 on NetBSD, since it needs +# to have a version after the .so, and ${PACKAGE_VERSION}.a +# on AIX, since a shared library needs to have +# a .a extension whereas shared objects for loadable +# extensions have a .so extension. Defaults to +# ${PACKAGE_VERSION}${SHLIB_SUFFIX}. +# CFLAGS_DEBUG - +# Flags used when running the compiler in debug mode +# CFLAGS_OPTIMIZE - +# Flags used when running the compiler in optimize mode +# CFLAGS - Additional CFLAGS added as necessary (usually 64-bit) +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_CONFIG_CFLAGS], [ + dnl TEA specific: Make sure we are initialized + AC_REQUIRE([TEA_INIT]) + + # Step 0.a: Enable 64 bit support? + + AC_MSG_CHECKING([if 64bit support is requested]) + AC_ARG_ENABLE(64bit, + AC_HELP_STRING([--enable-64bit], + [enable 64bit support (default: off)]), + [do64bit=$enableval], [do64bit=no]) + AC_MSG_RESULT([$do64bit]) + + # Step 0.b: Enable Solaris 64 bit VIS support? + + AC_MSG_CHECKING([if 64bit Sparc VIS support is requested]) + AC_ARG_ENABLE(64bit-vis, + AC_HELP_STRING([--enable-64bit-vis], + [enable 64bit Sparc VIS support (default: off)]), + [do64bitVIS=$enableval], [do64bitVIS=no]) + AC_MSG_RESULT([$do64bitVIS]) + # Force 64bit on with VIS + AS_IF([test "$do64bitVIS" = "yes"], [do64bit=yes]) + + # Step 0.c: Check if visibility support is available. Do this here so + # that platform specific alternatives can be used below if this fails. + + AC_CACHE_CHECK([if compiler supports visibility "hidden"], + tcl_cv_cc_visibility_hidden, [ + hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -Werror" + AC_TRY_LINK([ + extern __attribute__((__visibility__("hidden"))) void f(void); + void f(void) {}], [f();], tcl_cv_cc_visibility_hidden=yes, + tcl_cv_cc_visibility_hidden=no) + CFLAGS=$hold_cflags]) + AS_IF([test $tcl_cv_cc_visibility_hidden = yes], [ + AC_DEFINE(MODULE_SCOPE, + [extern __attribute__((__visibility__("hidden")))], + [Compiler support for module scope symbols]) + AC_DEFINE(HAVE_HIDDEN, [1], [Compiler support for module scope symbols]) + ]) + + # Step 0.d: Disable -rpath support? + + AC_MSG_CHECKING([if rpath support is requested]) + AC_ARG_ENABLE(rpath, + AC_HELP_STRING([--disable-rpath], + [disable rpath support (default: on)]), + [doRpath=$enableval], [doRpath=yes]) + AC_MSG_RESULT([$doRpath]) + + # TEA specific: Cross-compiling options for Windows/CE builds? + + AS_IF([test "${TEA_PLATFORM}" = windows], [ + AC_MSG_CHECKING([if Windows/CE build is requested]) + AC_ARG_ENABLE(wince, + AC_HELP_STRING([--enable-wince], + [enable Win/CE support (where applicable)]), + [doWince=$enableval], [doWince=no]) + AC_MSG_RESULT([$doWince]) + ]) + + # Set the variable "system" to hold the name and version number + # for the system. + + TEA_CONFIG_SYSTEM + + # Require ranlib early so we can override it in special cases below. + + AC_REQUIRE([AC_PROG_RANLIB]) + + # Set configuration options based on system name and version. + # This is similar to Tcl's unix/tcl.m4 except that we've added a + # "windows" case and removed some core-only vars. + + do64bit_ok=no + # default to '{$LIBS}' and set to "" on per-platform necessary basis + SHLIB_LD_LIBS='${LIBS}' + # When ld needs options to work in 64-bit mode, put them in + # LDFLAGS_ARCH so they eventually end up in LDFLAGS even if [load] + # is disabled by the user. [Bug 1016796] + LDFLAGS_ARCH="" + UNSHARED_LIB_SUFFIX="" + # TEA specific: use PACKAGE_VERSION instead of VERSION + TCL_TRIM_DOTS='`echo ${PACKAGE_VERSION} | tr -d .`' + ECHO_VERSION='`echo ${PACKAGE_VERSION}`' + TCL_LIB_VERSIONS_OK=ok + CFLAGS_DEBUG=-g + AS_IF([test "$GCC" = yes], [ + CFLAGS_OPTIMIZE=-O2 + CFLAGS_WARNING="-Wall" + ], [ + CFLAGS_OPTIMIZE=-O + CFLAGS_WARNING="" + ]) + AC_CHECK_TOOL(AR, ar) + STLIB_LD='${AR} cr' + LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH" + AS_IF([test "x$SHLIB_VERSION" = x],[SHLIB_VERSION="1.0"]) + case $system in + # TEA specific: + windows) + # This is a 2-stage check to make sure we have the 64-bit SDK + # We have to know where the SDK is installed. + # This magic is based on MS Platform SDK for Win2003 SP1 - hobbs + # MACHINE is IX86 for LINK, but this is used by the manifest, + # which requires x86|amd64|ia64. + MACHINE="X86" + if test "$do64bit" != "no" ; then + if test "x${MSSDK}x" = "xx" ; then + MSSDK="C:/Progra~1/Microsoft Platform SDK" + fi + MSSDK=`echo "$MSSDK" | sed -e 's!\\\!/!g'` + PATH64="" + case "$do64bit" in + amd64|x64|yes) + MACHINE="AMD64" ; # default to AMD64 64-bit build + PATH64="${MSSDK}/Bin/Win64/x86/AMD64" + ;; + ia64) + MACHINE="IA64" + PATH64="${MSSDK}/Bin/Win64" + ;; + esac + if test "$GCC" != "yes" -a ! -d "${PATH64}" ; then + AC_MSG_WARN([Could not find 64-bit $MACHINE SDK to enable 64bit mode]) + AC_MSG_WARN([Ensure latest Platform SDK is installed]) + do64bit="no" + else + AC_MSG_RESULT([ Using 64-bit $MACHINE mode]) + do64bit_ok="yes" + fi + fi + + if test "$doWince" != "no" ; then + if test "$do64bit" != "no" ; then + AC_MSG_ERROR([Windows/CE and 64-bit builds incompatible]) + fi + if test "$GCC" = "yes" ; then + AC_MSG_ERROR([Windows/CE and GCC builds incompatible]) + fi + TEA_PATH_CELIB + # Set defaults for common evc4/PPC2003 setup + # Currently Tcl requires 300+, possibly 420+ for sockets + CEVERSION=420; # could be 211 300 301 400 420 ... + TARGETCPU=ARMV4; # could be ARMV4 ARM MIPS SH3 X86 ... + ARCH=ARM; # could be ARM MIPS X86EM ... + PLATFORM="Pocket PC 2003"; # or "Pocket PC 2002" + if test "$doWince" != "yes"; then + # If !yes then the user specified something + # Reset ARCH to allow user to skip specifying it + ARCH= + eval `echo $doWince | awk -F, '{ \ + if (length([$]1)) { printf "CEVERSION=\"%s\"\n", [$]1; \ + if ([$]1 < 400) { printf "PLATFORM=\"Pocket PC 2002\"\n" } }; \ + if (length([$]2)) { printf "TARGETCPU=\"%s\"\n", toupper([$]2) }; \ + if (length([$]3)) { printf "ARCH=\"%s\"\n", toupper([$]3) }; \ + if (length([$]4)) { printf "PLATFORM=\"%s\"\n", [$]4 }; \ + }'` + if test "x${ARCH}" = "x" ; then + ARCH=$TARGETCPU; + fi + fi + OSVERSION=WCE$CEVERSION; + if test "x${WCEROOT}" = "x" ; then + WCEROOT="C:/Program Files/Microsoft eMbedded C++ 4.0" + if test ! -d "${WCEROOT}" ; then + WCEROOT="C:/Program Files/Microsoft eMbedded Tools" + fi + fi + if test "x${SDKROOT}" = "x" ; then + SDKROOT="C:/Program Files/Windows CE Tools" + if test ! -d "${SDKROOT}" ; then + SDKROOT="C:/Windows CE Tools" + fi + fi + WCEROOT=`echo "$WCEROOT" | sed -e 's!\\\!/!g'` + SDKROOT=`echo "$SDKROOT" | sed -e 's!\\\!/!g'` + if test ! -d "${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" \ + -o ! -d "${WCEROOT}/EVC/${OSVERSION}/bin"; then + AC_MSG_ERROR([could not find PocketPC SDK or target compiler to enable WinCE mode [$CEVERSION,$TARGETCPU,$ARCH,$PLATFORM]]) + doWince="no" + else + # We could PATH_NOSPACE these, but that's not important, + # as long as we quote them when used. + CEINCLUDE="${SDKROOT}/${OSVERSION}/${PLATFORM}/include" + if test -d "${CEINCLUDE}/${TARGETCPU}" ; then + CEINCLUDE="${CEINCLUDE}/${TARGETCPU}" + fi + CELIBPATH="${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" + fi + fi + + if test "$GCC" != "yes" ; then + if test "${SHARED_BUILD}" = "0" ; then + runtime=-MT + else + runtime=-MD + fi + + if test "$do64bit" != "no" ; then + # All this magic is necessary for the Win64 SDK RC1 - hobbs + CC="\"${PATH64}/cl.exe\"" + CFLAGS="${CFLAGS} -I\"${MSSDK}/Include\" -I\"${MSSDK}/Include/crt\" -I\"${MSSDK}/Include/crt/sys\"" + RC="\"${MSSDK}/bin/rc.exe\"" + lflags="-nologo -MACHINE:${MACHINE} -LIBPATH:\"${MSSDK}/Lib/${MACHINE}\"" + LINKBIN="\"${PATH64}/link.exe\"" + CFLAGS_DEBUG="-nologo -Zi -Od -W3 ${runtime}d" + CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}" + # Avoid 'unresolved external symbol __security_cookie' + # errors, c.f. http://support.microsoft.com/?id=894573 + TEA_ADD_LIBS([bufferoverflowU.lib]) + elif test "$doWince" != "no" ; then + CEBINROOT="${WCEROOT}/EVC/${OSVERSION}/bin" + if test "${TARGETCPU}" = "X86"; then + CC="\"${CEBINROOT}/cl.exe\"" + else + CC="\"${CEBINROOT}/cl${ARCH}.exe\"" + fi + CFLAGS="$CFLAGS -I\"${CELIB_DIR}/inc\" -I\"${CEINCLUDE}\"" + RC="\"${WCEROOT}/Common/EVC/bin/rc.exe\"" + arch=`echo ${ARCH} | awk '{print tolower([$]0)}'` + defs="${ARCH} _${ARCH}_ ${arch} PALM_SIZE _MT _WINDOWS" + if test "${SHARED_BUILD}" = "1" ; then + # Static CE builds require static celib as well + defs="${defs} _DLL" + fi + for i in $defs ; do + AC_DEFINE_UNQUOTED($i, 1, [WinCE def ]$i) + done + AC_DEFINE_UNQUOTED(_WIN32_WCE, $CEVERSION, [_WIN32_WCE version]) + AC_DEFINE_UNQUOTED(UNDER_CE, $CEVERSION, [UNDER_CE version]) + CFLAGS_DEBUG="-nologo -Zi -Od" + CFLAGS_OPTIMIZE="-nologo -Ox" + lversion=`echo ${CEVERSION} | sed -e 's/\(.\)\(..\)/\1\.\2/'` + lflags="-MACHINE:${ARCH} -LIBPATH:\"${CELIBPATH}\" -subsystem:windowsce,${lversion} -nologo" + LINKBIN="\"${CEBINROOT}/link.exe\"" + AC_SUBST(CELIB_DIR) + else + RC="rc" + lflags="-nologo" + LINKBIN="link" + CFLAGS_DEBUG="-nologo -Z7 -Od -W3 -WX ${runtime}d" + CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}" + fi + fi + + if test "$GCC" = "yes"; then + # mingw gcc mode + AC_CHECK_TOOL(RC, windres) + CFLAGS_DEBUG="-g" + CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer" + SHLIB_LD='${CC} -shared' + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' + LDFLAGS_CONSOLE="-wl,--subsystem,console ${lflags}" + LDFLAGS_WINDOW="-wl,--subsystem,windows ${lflags}" + + AC_CACHE_CHECK(for cross-compile version of gcc, + ac_cv_cross, + AC_TRY_COMPILE([ + #ifdef __WIN32__ + #error cross-compiler + #endif + ], [], + ac_cv_cross=yes, + ac_cv_cross=no) + ) + if test "$ac_cv_cross" = "yes"; then + case "$do64bit" in + amd64|x64|yes) + CC="x86_64-w64-mingw32-gcc" + LD="x86_64-w64-mingw32-ld" + AR="x86_64-w64-mingw32-ar" + RANLIB="x86_64-w64-mingw32-ranlib" + RC="x86_64-w64-mingw32-windres" + ;; + *) + CC="i686-w64-mingw32-gcc" + LD="i686-w64-mingw32-ld" + AR="i686-w64-mingw32-ar" + RANLIB="i686-w64-mingw32-ranlib" + RC="i686-w64-mingw32-windres" + ;; + esac + fi + + else + SHLIB_LD="${LINKBIN} -dll ${lflags}" + # link -lib only works when -lib is the first arg + STLIB_LD="${LINKBIN} -lib ${lflags}" + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.lib' + PATHTYPE=-w + # For information on what debugtype is most useful, see: + # http://msdn.microsoft.com/library/en-us/dnvc60/html/gendepdebug.asp + # and also + # http://msdn2.microsoft.com/en-us/library/y0zzbyt4%28VS.80%29.aspx + # This essentially turns it all on. + LDFLAGS_DEBUG="-debug -debugtype:cv" + LDFLAGS_OPTIMIZE="-release" + if test "$doWince" != "no" ; then + LDFLAGS_CONSOLE="-link ${lflags}" + LDFLAGS_WINDOW=${LDFLAGS_CONSOLE} + else + LDFLAGS_CONSOLE="-link -subsystem:console ${lflags}" + LDFLAGS_WINDOW="-link -subsystem:windows ${lflags}" + fi + fi + + SHLIB_SUFFIX=".dll" + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.dll' + + TCL_LIB_VERSIONS_OK=nodots + ;; + AIX-*) + AS_IF([test "${TCL_THREADS}" = "1" -a "$GCC" != "yes"], [ + # AIX requires the _r compiler when gcc isn't being used + case "${CC}" in + *_r|*_r\ *) + # ok ... + ;; + *) + # Make sure only first arg gets _r + CC=`echo "$CC" | sed -e 's/^\([[^ ]]*\)/\1_r/'` + ;; + esac + AC_MSG_RESULT([Using $CC for compiling with threads]) + ]) + LIBS="$LIBS -lc" + SHLIB_CFLAGS="" + SHLIB_SUFFIX=".so" + + LD_LIBRARY_PATH_VAR="LIBPATH" + + # Check to enable 64-bit flags for compiler/linker + AS_IF([test "$do64bit" = yes], [ + AS_IF([test "$GCC" = yes], [ + AC_MSG_WARN([64bit mode not supported with GCC on $system]) + ], [ + do64bit_ok=yes + CFLAGS="$CFLAGS -q64" + LDFLAGS_ARCH="-q64" + RANLIB="${RANLIB} -X64" + AR="${AR} -X64" + SHLIB_LD_FLAGS="-b64" + ]) + ]) + + AS_IF([test "`uname -m`" = ia64], [ + # AIX-5 uses ELF style dynamic libraries on IA-64, but not PPC + SHLIB_LD="/usr/ccs/bin/ld -G -z text" + AS_IF([test "$GCC" = yes], [ + CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + ], [ + CC_SEARCH_FLAGS='-R${LIB_RUNTIME_DIR}' + ]) + LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' + ], [ + AS_IF([test "$GCC" = yes], [ + SHLIB_LD='${CC} -shared -Wl,-bexpall' + ], [ + SHLIB_LD="/bin/ld -bhalt:4 -bM:SRE -bexpall -H512 -T512 -bnoentry" + LDFLAGS="$LDFLAGS -brtl" + ]) + SHLIB_LD="${SHLIB_LD} ${SHLIB_LD_FLAGS}" + CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + ]) + ;; + BeOS*) + SHLIB_CFLAGS="-fPIC" + SHLIB_LD='${CC} -nostart' + SHLIB_SUFFIX=".so" + + #----------------------------------------------------------- + # Check for inet_ntoa in -lbind, for BeOS (which also needs + # -lsocket, even if the network functions are in -lnet which + # is always linked to, for compatibility. + #----------------------------------------------------------- + AC_CHECK_LIB(bind, inet_ntoa, [LIBS="$LIBS -lbind -lsocket"]) + ;; + BSD/OS-4.*) + SHLIB_CFLAGS="-export-dynamic -fPIC" + SHLIB_LD='${CC} -shared' + SHLIB_SUFFIX=".so" + LDFLAGS="$LDFLAGS -export-dynamic" + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + CYGWIN_*) + SHLIB_CFLAGS="" + SHLIB_LD='${CC} -shared' + SHLIB_SUFFIX=".dll" + EXEEXT=".exe" + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + Haiku*) + LDFLAGS="$LDFLAGS -Wl,--export-dynamic" + SHLIB_CFLAGS="-fPIC" + SHLIB_SUFFIX=".so" + SHLIB_LD='${CC} -shared ${CFLAGS} ${LDFLAGS}' + AC_CHECK_LIB(network, inet_ntoa, [LIBS="$LIBS -lnetwork"]) + ;; + HP-UX-*.11.*) + # Use updated header definitions where possible + AC_DEFINE(_XOPEN_SOURCE_EXTENDED, 1, [Do we want to use the XOPEN network library?]) + # TEA specific: Needed by Tcl, but not most extensions + #AC_DEFINE(_XOPEN_SOURCE, 1, [Do we want to use the XOPEN network library?]) + #LIBS="$LIBS -lxnet" # Use the XOPEN network library + + AS_IF([test "`uname -m`" = ia64], [ + SHLIB_SUFFIX=".so" + # Use newer C++ library for C++ extensions + #if test "$GCC" != "yes" ; then + # CPPFLAGS="-AA" + #fi + ], [ + SHLIB_SUFFIX=".sl" + ]) + AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no) + AS_IF([test "$tcl_ok" = yes], [ + LDFLAGS="$LDFLAGS -Wl,-E" + CC_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.' + LD_SEARCH_FLAGS='+s +b ${LIB_RUNTIME_DIR}:.' + LD_LIBRARY_PATH_VAR="SHLIB_PATH" + ]) + AS_IF([test "$GCC" = yes], [ + SHLIB_LD='${CC} -shared' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + ], [ + CFLAGS="$CFLAGS -z" + # Users may want PA-RISC 1.1/2.0 portable code - needs HP cc + #CFLAGS="$CFLAGS +DAportable" + SHLIB_CFLAGS="+z" + SHLIB_LD="ld -b" + ]) + + # Check to enable 64-bit flags for compiler/linker + AS_IF([test "$do64bit" = "yes"], [ + AS_IF([test "$GCC" = yes], [ + case `${CC} -dumpmachine` in + hppa64*) + # 64-bit gcc in use. Fix flags for GNU ld. + do64bit_ok=yes + SHLIB_LD='${CC} -shared' + AS_IF([test $doRpath = yes], [ + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + ;; + *) + AC_MSG_WARN([64bit mode not supported with GCC on $system]) + ;; + esac + ], [ + do64bit_ok=yes + CFLAGS="$CFLAGS +DD64" + LDFLAGS_ARCH="+DD64" + ]) + ]) ;; + IRIX-6.*) + SHLIB_CFLAGS="" + SHLIB_LD="ld -n32 -shared -rdata_shared" + SHLIB_SUFFIX=".so" + AS_IF([test $doRpath = yes], [ + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}']) + AS_IF([test "$GCC" = yes], [ + CFLAGS="$CFLAGS -mabi=n32" + LDFLAGS="$LDFLAGS -mabi=n32" + ], [ + case $system in + IRIX-6.3) + # Use to build 6.2 compatible binaries on 6.3. + CFLAGS="$CFLAGS -n32 -D_OLD_TERMIOS" + ;; + *) + CFLAGS="$CFLAGS -n32" + ;; + esac + LDFLAGS="$LDFLAGS -n32" + ]) + ;; + IRIX64-6.*) + SHLIB_CFLAGS="" + SHLIB_LD="ld -n32 -shared -rdata_shared" + SHLIB_SUFFIX=".so" + AS_IF([test $doRpath = yes], [ + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}']) + + # Check to enable 64-bit flags for compiler/linker + + AS_IF([test "$do64bit" = yes], [ + AS_IF([test "$GCC" = yes], [ + AC_MSG_WARN([64bit mode not supported by gcc]) + ], [ + do64bit_ok=yes + SHLIB_LD="ld -64 -shared -rdata_shared" + CFLAGS="$CFLAGS -64" + LDFLAGS_ARCH="-64" + ]) + ]) + ;; + Linux*|GNU*|NetBSD-Debian) + SHLIB_CFLAGS="-fPIC" + SHLIB_SUFFIX=".so" + + # TEA specific: + CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer" + + # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS + SHLIB_LD='${CC} -shared ${CFLAGS} ${LDFLAGS_DEFAULT}' + LDFLAGS="$LDFLAGS -Wl,--export-dynamic" + AS_IF([test $doRpath = yes], [ + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + AS_IF([test "`uname -m`" = "alpha"], [CFLAGS="$CFLAGS -mieee"]) + AS_IF([test $do64bit = yes], [ + AC_CACHE_CHECK([if compiler accepts -m64 flag], tcl_cv_cc_m64, [ + hold_cflags=$CFLAGS + CFLAGS="$CFLAGS -m64" + AC_TRY_LINK(,, tcl_cv_cc_m64=yes, tcl_cv_cc_m64=no) + CFLAGS=$hold_cflags]) + AS_IF([test $tcl_cv_cc_m64 = yes], [ + CFLAGS="$CFLAGS -m64" + do64bit_ok=yes + ]) + ]) + + # The combo of gcc + glibc has a bug related to inlining of + # functions like strtod(). The -fno-builtin flag should address + # this problem but it does not work. The -fno-inline flag is kind + # of overkill but it works. Disable inlining only when one of the + # files in compat/*.c is being linked in. + + AS_IF([test x"${USE_COMPAT}" != x],[CFLAGS="$CFLAGS -fno-inline"]) + ;; + Lynx*) + SHLIB_CFLAGS="-fPIC" + SHLIB_SUFFIX=".so" + CFLAGS_OPTIMIZE=-02 + SHLIB_LD='${CC} -shared' + LD_FLAGS="-Wl,--export-dynamic" + AS_IF([test $doRpath = yes], [ + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) + ;; + OpenBSD-*) + arch=`arch -s` + case "$arch" in + vax) + SHLIB_SUFFIX="" + SHARED_LIB_SUFFIX="" + LDFLAGS="" + ;; + *) + SHLIB_CFLAGS="-fPIC" + SHLIB_LD='${CC} -shared ${SHLIB_CFLAGS}' + SHLIB_SUFFIX=".so" + AS_IF([test $doRpath = yes], [ + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so.${SHLIB_VERSION}' + LDFLAGS="-Wl,-export-dynamic" + ;; + esac + case "$arch" in + vax) + CFLAGS_OPTIMIZE="-O1" + ;; + *) + CFLAGS_OPTIMIZE="-O2" + ;; + esac + AS_IF([test "${TCL_THREADS}" = "1"], [ + # On OpenBSD: Compile with -pthread + # Don't link with -lpthread + LIBS=`echo $LIBS | sed s/-lpthread//` + CFLAGS="$CFLAGS -pthread" + ]) + # OpenBSD doesn't do version numbers with dots. + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' + TCL_LIB_VERSIONS_OK=nodots + ;; + NetBSD-*) + # NetBSD has ELF and can use 'cc -shared' to build shared libs + SHLIB_CFLAGS="-fPIC" + SHLIB_LD='${CC} -shared ${SHLIB_CFLAGS}' + SHLIB_SUFFIX=".so" + LDFLAGS="$LDFLAGS -export-dynamic" + AS_IF([test $doRpath = yes], [ + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + AS_IF([test "${TCL_THREADS}" = "1"], [ + # The -pthread needs to go in the CFLAGS, not LIBS + LIBS=`echo $LIBS | sed s/-pthread//` + CFLAGS="$CFLAGS -pthread" + LDFLAGS="$LDFLAGS -pthread" + ]) + ;; + FreeBSD-*) + # This configuration from FreeBSD Ports. + SHLIB_CFLAGS="-fPIC" + SHLIB_LD="${CC} -shared" + TCL_SHLIB_LD_EXTRAS="-Wl,-soname=\$[@]" + SHLIB_SUFFIX=".so" + LDFLAGS="" + AS_IF([test $doRpath = yes], [ + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) + AS_IF([test "${TCL_THREADS}" = "1"], [ + # The -pthread needs to go in the LDFLAGS, not LIBS + LIBS=`echo $LIBS | sed s/-pthread//` + CFLAGS="$CFLAGS $PTHREAD_CFLAGS" + LDFLAGS="$LDFLAGS $PTHREAD_LIBS"]) + # Version numbers are dot-stripped by system policy. + TCL_TRIM_DOTS=`echo ${PACKAGE_VERSION} | tr -d .` + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1' + TCL_LIB_VERSIONS_OK=nodots + ;; + Darwin-*) + CFLAGS_OPTIMIZE="-Os" + SHLIB_CFLAGS="-fno-common" + # To avoid discrepancies between what headers configure sees during + # preprocessing tests and compiling tests, move any -isysroot and + # -mmacosx-version-min flags from CFLAGS to CPPFLAGS: + CPPFLAGS="${CPPFLAGS} `echo " ${CFLAGS}" | \ + awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \ + if ([$]i~/^(isysroot|mmacosx-version-min)/) print "-"[$]i}'`" + CFLAGS="`echo " ${CFLAGS}" | \ + awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \ + if (!([$]i~/^(isysroot|mmacosx-version-min)/)) print "-"[$]i}'`" + AS_IF([test $do64bit = yes], [ + case `arch` in + ppc) + AC_CACHE_CHECK([if compiler accepts -arch ppc64 flag], + tcl_cv_cc_arch_ppc64, [ + hold_cflags=$CFLAGS + CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5" + AC_TRY_LINK(,, tcl_cv_cc_arch_ppc64=yes, + tcl_cv_cc_arch_ppc64=no) + CFLAGS=$hold_cflags]) + AS_IF([test $tcl_cv_cc_arch_ppc64 = yes], [ + CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5" + do64bit_ok=yes + ]);; + i386) + AC_CACHE_CHECK([if compiler accepts -arch x86_64 flag], + tcl_cv_cc_arch_x86_64, [ + hold_cflags=$CFLAGS + CFLAGS="$CFLAGS -arch x86_64" + AC_TRY_LINK(,, tcl_cv_cc_arch_x86_64=yes, + tcl_cv_cc_arch_x86_64=no) + CFLAGS=$hold_cflags]) + AS_IF([test $tcl_cv_cc_arch_x86_64 = yes], [ + CFLAGS="$CFLAGS -arch x86_64" + do64bit_ok=yes + ]);; + *) + AC_MSG_WARN([Don't know how enable 64-bit on architecture `arch`]);; + esac + ], [ + # Check for combined 32-bit and 64-bit fat build + AS_IF([echo "$CFLAGS " |grep -E -q -- '-arch (ppc64|x86_64) ' \ + && echo "$CFLAGS " |grep -E -q -- '-arch (ppc|i386) '], [ + fat_32_64=yes]) + ]) + # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS + SHLIB_LD='${CC} -dynamiclib ${CFLAGS} ${LDFLAGS_DEFAULT}' + AC_CACHE_CHECK([if ld accepts -single_module flag], tcl_cv_ld_single_module, [ + hold_ldflags=$LDFLAGS + LDFLAGS="$LDFLAGS -dynamiclib -Wl,-single_module" + AC_TRY_LINK(, [int i;], tcl_cv_ld_single_module=yes, tcl_cv_ld_single_module=no) + LDFLAGS=$hold_ldflags]) + AS_IF([test $tcl_cv_ld_single_module = yes], [ + SHLIB_LD="${SHLIB_LD} -Wl,-single_module" + ]) + # TEA specific: link shlib with current and compatibility version flags + vers=`echo ${PACKAGE_VERSION} | sed -e 's/^\([[0-9]]\{1,5\}\)\(\(\.[[0-9]]\{1,3\}\)\{0,2\}\).*$/\1\2/p' -e d` + SHLIB_LD="${SHLIB_LD} -current_version ${vers:-0} -compatibility_version ${vers:-0}" + SHLIB_SUFFIX=".dylib" + # Don't use -prebind when building for Mac OS X 10.4 or later only: + AS_IF([test "`echo "${MACOSX_DEPLOYMENT_TARGET}" | awk -F '10\\.' '{print int([$]2)}'`" -lt 4 -a \ + "`echo "${CPPFLAGS}" | awk -F '-mmacosx-version-min=10\\.' '{print int([$]2)}'`" -lt 4], [ + LDFLAGS="$LDFLAGS -prebind"]) + LDFLAGS="$LDFLAGS -headerpad_max_install_names" + AC_CACHE_CHECK([if ld accepts -search_paths_first flag], + tcl_cv_ld_search_paths_first, [ + hold_ldflags=$LDFLAGS + LDFLAGS="$LDFLAGS -Wl,-search_paths_first" + AC_TRY_LINK(, [int i;], tcl_cv_ld_search_paths_first=yes, + tcl_cv_ld_search_paths_first=no) + LDFLAGS=$hold_ldflags]) + AS_IF([test $tcl_cv_ld_search_paths_first = yes], [ + LDFLAGS="$LDFLAGS -Wl,-search_paths_first" + ]) + AS_IF([test "$tcl_cv_cc_visibility_hidden" != yes], [ + AC_DEFINE(MODULE_SCOPE, [__private_extern__], + [Compiler support for module scope symbols]) + tcl_cv_cc_visibility_hidden=yes + ]) + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + LD_LIBRARY_PATH_VAR="DYLD_LIBRARY_PATH" + # TEA specific: for combined 32 & 64 bit fat builds of Tk + # extensions, verify that 64-bit build is possible. + AS_IF([test "$fat_32_64" = yes && test -n "${TK_BIN_DIR}"], [ + AS_IF([test "${TEA_WINDOWINGSYSTEM}" = x11], [ + AC_CACHE_CHECK([for 64-bit X11], tcl_cv_lib_x11_64, [ + for v in CFLAGS CPPFLAGS LDFLAGS; do + eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc / /g" -e "s/-arch i386 / /g"`"' + done + CPPFLAGS="$CPPFLAGS -I/usr/X11R6/include" + LDFLAGS="$LDFLAGS -L/usr/X11R6/lib -lX11" + AC_TRY_LINK([#include ], [XrmInitialize();], + tcl_cv_lib_x11_64=yes, tcl_cv_lib_x11_64=no) + for v in CFLAGS CPPFLAGS LDFLAGS; do + eval $v'="$hold_'$v'"' + done]) + ]) + AS_IF([test "${TEA_WINDOWINGSYSTEM}" = aqua], [ + AC_CACHE_CHECK([for 64-bit Tk], tcl_cv_lib_tk_64, [ + for v in CFLAGS CPPFLAGS LDFLAGS; do + eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc / /g" -e "s/-arch i386 / /g"`"' + done + CPPFLAGS="$CPPFLAGS -DUSE_TCL_STUBS=1 -DUSE_TK_STUBS=1 ${TCL_INCLUDES} ${TK_INCLUDES}" + LDFLAGS="$LDFLAGS ${TCL_STUB_LIB_SPEC} ${TK_STUB_LIB_SPEC}" + AC_TRY_LINK([#include ], [Tk_InitStubs(NULL, "", 0);], + tcl_cv_lib_tk_64=yes, tcl_cv_lib_tk_64=no) + for v in CFLAGS CPPFLAGS LDFLAGS; do + eval $v'="$hold_'$v'"' + done]) + ]) + # remove 64-bit arch flags from CFLAGS et al. if configuration + # does not support 64-bit. + AS_IF([test "$tcl_cv_lib_tk_64" = no -o "$tcl_cv_lib_x11_64" = no], [ + AC_MSG_NOTICE([Removing 64-bit architectures from compiler & linker flags]) + for v in CFLAGS CPPFLAGS LDFLAGS; do + eval $v'="`echo "$'$v' "|sed -e "s/-arch ppc64 / /g" -e "s/-arch x86_64 / /g"`"' + done]) + ]) + ;; + OS/390-*) + CFLAGS_OPTIMIZE="" # Optimizer is buggy + AC_DEFINE(_OE_SOCKETS, 1, # needed in sys/socket.h + [Should OS/390 do the right thing with sockets?]) + ;; + OSF1-V*) + # Digital OSF/1 + SHLIB_CFLAGS="" + AS_IF([test "$SHARED_BUILD" = 1], [ + SHLIB_LD='ld -shared -expect_unresolved "*"' + ], [ + SHLIB_LD='ld -non_shared -expect_unresolved "*"' + ]) + SHLIB_SUFFIX=".so" + AS_IF([test $doRpath = yes], [ + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}']) + AS_IF([test "$GCC" = yes], [CFLAGS="$CFLAGS -mieee"], [ + CFLAGS="$CFLAGS -DHAVE_TZSET -std1 -ieee"]) + # see pthread_intro(3) for pthread support on osf1, k.furukawa + AS_IF([test "${TCL_THREADS}" = 1], [ + CFLAGS="$CFLAGS -DHAVE_PTHREAD_ATTR_SETSTACKSIZE" + CFLAGS="$CFLAGS -DTCL_THREAD_STACK_MIN=PTHREAD_STACK_MIN*64" + LIBS=`echo $LIBS | sed s/-lpthreads//` + AS_IF([test "$GCC" = yes], [ + LIBS="$LIBS -lpthread -lmach -lexc" + ], [ + CFLAGS="$CFLAGS -pthread" + LDFLAGS="$LDFLAGS -pthread" + ]) + ]) + ;; + QNX-6*) + # QNX RTP + # This may work for all QNX, but it was only reported for v6. + SHLIB_CFLAGS="-fPIC" + SHLIB_LD="ld -Bshareable -x" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + SCO_SV-3.2*) + AS_IF([test "$GCC" = yes], [ + SHLIB_CFLAGS="-fPIC -melf" + LDFLAGS="$LDFLAGS -melf -Wl,-Bexport" + ], [ + SHLIB_CFLAGS="-Kpic -belf" + LDFLAGS="$LDFLAGS -belf -Wl,-Bexport" + ]) + SHLIB_LD="ld -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + SunOS-5.[[0-6]]) + # Careful to not let 5.10+ fall into this case + + # Note: If _REENTRANT isn't defined, then Solaris + # won't define thread-safe library routines. + + AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?]) + AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1, + [Do we really want to follow the standard? Yes we do!]) + + SHLIB_CFLAGS="-KPIC" + SHLIB_SUFFIX=".so" + AS_IF([test "$GCC" = yes], [ + SHLIB_LD='${CC} -shared' + CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + ], [ + SHLIB_LD="/usr/ccs/bin/ld -G -z text" + CC_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + ]) + ;; + SunOS-5*) + # Note: If _REENTRANT isn't defined, then Solaris + # won't define thread-safe library routines. + + AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?]) + AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1, + [Do we really want to follow the standard? Yes we do!]) + + SHLIB_CFLAGS="-KPIC" + + # Check to enable 64-bit flags for compiler/linker + AS_IF([test "$do64bit" = yes], [ + arch=`isainfo` + AS_IF([test "$arch" = "sparcv9 sparc"], [ + AS_IF([test "$GCC" = yes], [ + AS_IF([test "`${CC} -dumpversion | awk -F. '{print [$]1}'`" -lt 3], [ + AC_MSG_WARN([64bit mode not supported with GCC < 3.2 on $system]) + ], [ + do64bit_ok=yes + CFLAGS="$CFLAGS -m64 -mcpu=v9" + LDFLAGS="$LDFLAGS -m64 -mcpu=v9" + SHLIB_CFLAGS="-fPIC" + ]) + ], [ + do64bit_ok=yes + AS_IF([test "$do64bitVIS" = yes], [ + CFLAGS="$CFLAGS -xarch=v9a" + LDFLAGS_ARCH="-xarch=v9a" + ], [ + CFLAGS="$CFLAGS -xarch=v9" + LDFLAGS_ARCH="-xarch=v9" + ]) + # Solaris 64 uses this as well + #LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH_64" + ]) + ], [AS_IF([test "$arch" = "amd64 i386"], [ + AS_IF([test "$GCC" = yes], [ + case $system in + SunOS-5.1[[1-9]]*|SunOS-5.[[2-9]][[0-9]]*) + do64bit_ok=yes + CFLAGS="$CFLAGS -m64" + LDFLAGS="$LDFLAGS -m64";; + *) + AC_MSG_WARN([64bit mode not supported with GCC on $system]);; + esac + ], [ + do64bit_ok=yes + case $system in + SunOS-5.1[[1-9]]*|SunOS-5.[[2-9]][[0-9]]*) + CFLAGS="$CFLAGS -m64" + LDFLAGS="$LDFLAGS -m64";; + *) + CFLAGS="$CFLAGS -xarch=amd64" + LDFLAGS="$LDFLAGS -xarch=amd64";; + esac + ]) + ], [AC_MSG_WARN([64bit mode not supported for $arch])])]) + ]) + + SHLIB_SUFFIX=".so" + AS_IF([test "$GCC" = yes], [ + SHLIB_LD='${CC} -shared' + CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + AS_IF([test "$do64bit_ok" = yes], [ + AS_IF([test "$arch" = "sparcv9 sparc"], [ + # We need to specify -static-libgcc or we need to + # add the path to the sparv9 libgcc. + # JH: static-libgcc is necessary for core Tcl, but may + # not be necessary for extensions. + SHLIB_LD="$SHLIB_LD -m64 -mcpu=v9 -static-libgcc" + # for finding sparcv9 libgcc, get the regular libgcc + # path, remove so name and append 'sparcv9' + #v9gcclibdir="`gcc -print-file-name=libgcc_s.so` | ..." + #CC_SEARCH_FLAGS="${CC_SEARCH_FLAGS},-R,$v9gcclibdir" + ], [AS_IF([test "$arch" = "amd64 i386"], [ + # JH: static-libgcc is necessary for core Tcl, but may + # not be necessary for extensions. + SHLIB_LD="$SHLIB_LD -m64 -static-libgcc" + ])]) + ]) + ], [ + case $system in + SunOS-5.[[1-9]][[0-9]]*) + # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS + SHLIB_LD='${CC} -G -z text ${LDFLAGS_DEFAULT}';; + *) + SHLIB_LD='/usr/ccs/bin/ld -G -z text';; + esac + CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' + ]) + ;; + UNIX_SV* | UnixWare-5*) + SHLIB_CFLAGS="-KPIC" + SHLIB_LD='${CC} -G' + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + # Some UNIX_SV* systems (unixware 1.1.2 for example) have linkers + # that don't grok the -Bexport option. Test that it does. + AC_CACHE_CHECK([for ld accepts -Bexport flag], tcl_cv_ld_Bexport, [ + hold_ldflags=$LDFLAGS + LDFLAGS="$LDFLAGS -Wl,-Bexport" + AC_TRY_LINK(, [int i;], tcl_cv_ld_Bexport=yes, tcl_cv_ld_Bexport=no) + LDFLAGS=$hold_ldflags]) + AS_IF([test $tcl_cv_ld_Bexport = yes], [ + LDFLAGS="$LDFLAGS -Wl,-Bexport" + ]) + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + esac + + AS_IF([test "$do64bit" = yes -a "$do64bit_ok" = no], [ + AC_MSG_WARN([64bit support being disabled -- don't know magic for this platform]) + ]) + +dnl # Add any CPPFLAGS set in the environment to our CFLAGS, but delay doing so +dnl # until the end of configure, as configure's compile and link tests use +dnl # both CPPFLAGS and CFLAGS (unlike our compile and link) but configure's +dnl # preprocessing tests use only CPPFLAGS. + AC_CONFIG_COMMANDS_PRE([CFLAGS="${CFLAGS} ${CPPFLAGS}"; CPPFLAGS=""]) + + # Add in the arch flags late to ensure it wasn't removed. + # Not necessary in TEA, but this is aligned with core + LDFLAGS="$LDFLAGS $LDFLAGS_ARCH" + + # If we're running gcc, then change the C flags for compiling shared + # libraries to the right flags for gcc, instead of those for the + # standard manufacturer compiler. + + AS_IF([test "$GCC" = yes], [ + case $system in + AIX-*) ;; + BSD/OS*) ;; + CYGWIN_*|MINGW32_*) ;; + IRIX*) ;; + NetBSD-*|FreeBSD-*|OpenBSD-*) ;; + Darwin-*) ;; + SCO_SV-3.2*) ;; + windows) ;; + *) SHLIB_CFLAGS="-fPIC" ;; + esac]) + + AS_IF([test "$tcl_cv_cc_visibility_hidden" != yes], [ + AC_DEFINE(MODULE_SCOPE, [extern], + [No Compiler support for module scope symbols]) + ]) + + AS_IF([test "$SHARED_LIB_SUFFIX" = ""], [ + # TEA specific: use PACKAGE_VERSION instead of VERSION + SHARED_LIB_SUFFIX='${PACKAGE_VERSION}${SHLIB_SUFFIX}']) + AS_IF([test "$UNSHARED_LIB_SUFFIX" = ""], [ + # TEA specific: use PACKAGE_VERSION instead of VERSION + UNSHARED_LIB_SUFFIX='${PACKAGE_VERSION}.a']) + + if test "${GCC}" = "yes" -a ${SHLIB_SUFFIX} = ".dll"; then + AC_CACHE_CHECK(for SEH support in compiler, + tcl_cv_seh, + AC_TRY_RUN([ +#define WIN32_LEAN_AND_MEAN +#include +#undef WIN32_LEAN_AND_MEAN + + int main(int argc, char** argv) { + int a, b = 0; + __try { + a = 666 / b; + } + __except (EXCEPTION_EXECUTE_HANDLER) { + return 0; + } + return 1; + } + ], + tcl_cv_seh=yes, + tcl_cv_seh=no, + tcl_cv_seh=no) + ) + if test "$tcl_cv_seh" = "no" ; then + AC_DEFINE(HAVE_NO_SEH, 1, + [Defined when mingw does not support SEH]) + fi + + # + # Check to see if the excpt.h include file provided contains the + # definition for EXCEPTION_DISPOSITION; if not, which is the case + # with Cygwin's version as of 2002-04-10, define it to be int, + # sufficient for getting the current code to work. + # + AC_CACHE_CHECK(for EXCEPTION_DISPOSITION support in include files, + tcl_cv_eh_disposition, + AC_TRY_COMPILE([ +# define WIN32_LEAN_AND_MEAN +# include +# undef WIN32_LEAN_AND_MEAN + ],[ + EXCEPTION_DISPOSITION x; + ], + tcl_cv_eh_disposition=yes, + tcl_cv_eh_disposition=no) + ) + if test "$tcl_cv_eh_disposition" = "no" ; then + AC_DEFINE(EXCEPTION_DISPOSITION, int, + [Defined when cygwin/mingw does not support EXCEPTION DISPOSITION]) + fi + + # Check to see if winnt.h defines CHAR, SHORT, and LONG + # even if VOID has already been #defined. The win32api + # used by mingw and cygwin is known to do this. + + AC_CACHE_CHECK(for winnt.h that ignores VOID define, + tcl_cv_winnt_ignore_void, + AC_TRY_COMPILE([ +#define VOID void +#define WIN32_LEAN_AND_MEAN +#include +#undef WIN32_LEAN_AND_MEAN + ], [ + CHAR c; + SHORT s; + LONG l; + ], + tcl_cv_winnt_ignore_void=yes, + tcl_cv_winnt_ignore_void=no) + ) + if test "$tcl_cv_winnt_ignore_void" = "yes" ; then + AC_DEFINE(HAVE_WINNT_IGNORE_VOID, 1, + [Defined when cygwin/mingw ignores VOID define in winnt.h]) + fi + fi + + # See if the compiler supports casting to a union type. + # This is used to stop gcc from printing a compiler + # warning when initializing a union member. + + AC_CACHE_CHECK(for cast to union support, + tcl_cv_cast_to_union, + AC_TRY_COMPILE([], + [ + union foo { int i; double d; }; + union foo f = (union foo) (int) 0; + ], + tcl_cv_cast_to_union=yes, + tcl_cv_cast_to_union=no) + ) + if test "$tcl_cv_cast_to_union" = "yes"; then + AC_DEFINE(HAVE_CAST_TO_UNION, 1, + [Defined when compiler supports casting to union type.]) + fi + + AC_SUBST(CFLAGS_DEBUG) + AC_SUBST(CFLAGS_OPTIMIZE) + AC_SUBST(CFLAGS_WARNING) + + AC_SUBST(STLIB_LD) + AC_SUBST(SHLIB_LD) + + AC_SUBST(SHLIB_LD_LIBS) + AC_SUBST(SHLIB_CFLAGS) + + AC_SUBST(LD_LIBRARY_PATH_VAR) + + # These must be called after we do the basic CFLAGS checks and + # verify any possible 64-bit or similar switches are necessary + TEA_TCL_EARLY_FLAGS + TEA_TCL_64BIT_FLAGS +]) + +#-------------------------------------------------------------------- +# TEA_SERIAL_PORT +# +# Determine which interface to use to talk to the serial port. +# Note that #include lines must begin in leftmost column for +# some compilers to recognize them as preprocessor directives, +# and some build environments have stdin not pointing at a +# pseudo-terminal (usually /dev/null instead.) +# +# Arguments: +# none +# +# Results: +# +# Defines only one of the following vars: +# HAVE_SYS_MODEM_H +# USE_TERMIOS +# USE_TERMIO +# USE_SGTTY +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_SERIAL_PORT], [ + AC_CHECK_HEADERS(sys/modem.h) + AC_CACHE_CHECK([termios vs. termio vs. sgtty], tcl_cv_api_serial, [ + AC_TRY_RUN([ +#include + +int main() { + struct termios t; + if (tcgetattr(0, &t) == 0) { + cfsetospeed(&t, 0); + t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB; + return 0; + } + return 1; +}], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no) + if test $tcl_cv_api_serial = no ; then + AC_TRY_RUN([ +#include + +int main() { + struct termio t; + if (ioctl(0, TCGETA, &t) == 0) { + t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB; + return 0; + } + return 1; +}], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no) + fi + if test $tcl_cv_api_serial = no ; then + AC_TRY_RUN([ +#include + +int main() { + struct sgttyb t; + if (ioctl(0, TIOCGETP, &t) == 0) { + t.sg_ospeed = 0; + t.sg_flags |= ODDP | EVENP | RAW; + return 0; + } + return 1; +}], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=no, tcl_cv_api_serial=no) + fi + if test $tcl_cv_api_serial = no ; then + AC_TRY_RUN([ +#include +#include + +int main() { + struct termios t; + if (tcgetattr(0, &t) == 0 + || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { + cfsetospeed(&t, 0); + t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB; + return 0; + } + return 1; +}], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no) + fi + if test $tcl_cv_api_serial = no; then + AC_TRY_RUN([ +#include +#include + +int main() { + struct termio t; + if (ioctl(0, TCGETA, &t) == 0 + || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { + t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB; + return 0; + } + return 1; + }], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no) + fi + if test $tcl_cv_api_serial = no; then + AC_TRY_RUN([ +#include +#include + +int main() { + struct sgttyb t; + if (ioctl(0, TIOCGETP, &t) == 0 + || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { + t.sg_ospeed = 0; + t.sg_flags |= ODDP | EVENP | RAW; + return 0; + } + return 1; +}], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=none, tcl_cv_api_serial=none) + fi]) + case $tcl_cv_api_serial in + termios) AC_DEFINE(USE_TERMIOS, 1, [Use the termios API for serial lines]);; + termio) AC_DEFINE(USE_TERMIO, 1, [Use the termio API for serial lines]);; + sgtty) AC_DEFINE(USE_SGTTY, 1, [Use the sgtty API for serial lines]);; + esac +]) + +#-------------------------------------------------------------------- +# TEA_MISSING_POSIX_HEADERS +# +# Supply substitutes for missing POSIX header files. Special +# notes: +# - stdlib.h doesn't define strtol, strtoul, or +# strtod in some versions of SunOS +# - some versions of string.h don't declare procedures such +# as strstr +# +# Arguments: +# none +# +# Results: +# +# Defines some of the following vars: +# NO_DIRENT_H +# NO_ERRNO_H +# NO_VALUES_H +# HAVE_LIMITS_H or NO_LIMITS_H +# NO_STDLIB_H +# NO_STRING_H +# NO_SYS_WAIT_H +# NO_DLFCN_H +# HAVE_SYS_PARAM_H +# +# HAVE_STRING_H ? +# +# tkUnixPort.h checks for HAVE_LIMITS_H, so do both HAVE and +# CHECK on limits.h +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_MISSING_POSIX_HEADERS], [ + AC_CACHE_CHECK([dirent.h], tcl_cv_dirent_h, [ + AC_TRY_LINK([#include +#include ], [ +#ifndef _POSIX_SOURCE +# ifdef __Lynx__ + /* + * Generate compilation error to make the test fail: Lynx headers + * are only valid if really in the POSIX environment. + */ + + missing_procedure(); +# endif +#endif +DIR *d; +struct dirent *entryPtr; +char *p; +d = opendir("foobar"); +entryPtr = readdir(d); +p = entryPtr->d_name; +closedir(d); +], tcl_cv_dirent_h=yes, tcl_cv_dirent_h=no)]) + + if test $tcl_cv_dirent_h = no; then + AC_DEFINE(NO_DIRENT_H, 1, [Do we have ?]) + fi + + # TEA specific: + AC_CHECK_HEADER(errno.h, , [AC_DEFINE(NO_ERRNO_H, 1, [Do we have ?])]) + AC_CHECK_HEADER(float.h, , [AC_DEFINE(NO_FLOAT_H, 1, [Do we have ?])]) + AC_CHECK_HEADER(values.h, , [AC_DEFINE(NO_VALUES_H, 1, [Do we have ?])]) + AC_CHECK_HEADER(limits.h, + [AC_DEFINE(HAVE_LIMITS_H, 1, [Do we have ?])], + [AC_DEFINE(NO_LIMITS_H, 1, [Do we have ?])]) + AC_CHECK_HEADER(stdlib.h, tcl_ok=1, tcl_ok=0) + AC_EGREP_HEADER(strtol, stdlib.h, , tcl_ok=0) + AC_EGREP_HEADER(strtoul, stdlib.h, , tcl_ok=0) + AC_EGREP_HEADER(strtod, stdlib.h, , tcl_ok=0) + if test $tcl_ok = 0; then + AC_DEFINE(NO_STDLIB_H, 1, [Do we have ?]) + fi + AC_CHECK_HEADER(string.h, tcl_ok=1, tcl_ok=0) + AC_EGREP_HEADER(strstr, string.h, , tcl_ok=0) + AC_EGREP_HEADER(strerror, string.h, , tcl_ok=0) + + # See also memmove check below for a place where NO_STRING_H can be + # set and why. + + if test $tcl_ok = 0; then + AC_DEFINE(NO_STRING_H, 1, [Do we have ?]) + fi + + AC_CHECK_HEADER(sys/wait.h, , [AC_DEFINE(NO_SYS_WAIT_H, 1, [Do we have ?])]) + AC_CHECK_HEADER(dlfcn.h, , [AC_DEFINE(NO_DLFCN_H, 1, [Do we have ?])]) + + # OS/390 lacks sys/param.h (and doesn't need it, by chance). + AC_HAVE_HEADERS(sys/param.h) +]) + +#-------------------------------------------------------------------- +# TEA_PATH_X +# +# Locate the X11 header files and the X11 library archive. Try +# the ac_path_x macro first, but if it doesn't find the X stuff +# (e.g. because there's no xmkmf program) then check through +# a list of possible directories. Under some conditions the +# autoconf macro will return an include directory that contains +# no include files, so double-check its result just to be safe. +# +# This should be called after TEA_CONFIG_CFLAGS as setting the +# LIBS line can confuse some configure macro magic. +# +# Arguments: +# none +# +# Results: +# +# Sets the following vars: +# XINCLUDES +# XLIBSW +# PKG_LIBS (appends to) +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_PATH_X], [ + if test "${TEA_WINDOWINGSYSTEM}" = "x11" ; then + TEA_PATH_UNIX_X + fi +]) + +AC_DEFUN([TEA_PATH_UNIX_X], [ + AC_PATH_X + not_really_there="" + if test "$no_x" = ""; then + if test "$x_includes" = ""; then + AC_TRY_CPP([#include ], , not_really_there="yes") + else + if test ! -r $x_includes/X11/Xlib.h; then + not_really_there="yes" + fi + fi + fi + if test "$no_x" = "yes" -o "$not_really_there" = "yes"; then + AC_MSG_CHECKING([for X11 header files]) + found_xincludes="no" + AC_TRY_CPP([#include ], found_xincludes="yes", found_xincludes="no") + if test "$found_xincludes" = "no"; then + dirs="/usr/unsupported/include /usr/local/include /usr/X386/include /usr/X11R6/include /usr/X11R5/include /usr/include/X11R5 /usr/include/X11R4 /usr/openwin/include /usr/X11/include /usr/sww/include" + for i in $dirs ; do + if test -r $i/X11/Xlib.h; then + AC_MSG_RESULT([$i]) + XINCLUDES=" -I$i" + found_xincludes="yes" + break + fi + done + fi + else + if test "$x_includes" != ""; then + XINCLUDES="-I$x_includes" + found_xincludes="yes" + fi + fi + if test "$found_xincludes" = "no"; then + AC_MSG_RESULT([couldn't find any!]) + fi + + if test "$no_x" = yes; then + AC_MSG_CHECKING([for X11 libraries]) + XLIBSW=nope + dirs="/usr/unsupported/lib /usr/local/lib /usr/X386/lib /usr/X11R6/lib /usr/X11R5/lib /usr/lib/X11R5 /usr/lib/X11R4 /usr/openwin/lib /usr/X11/lib /usr/sww/X11/lib" + for i in $dirs ; do + if test -r $i/libX11.a -o -r $i/libX11.so -o -r $i/libX11.sl -o -r $i/libX11.dylib; then + AC_MSG_RESULT([$i]) + XLIBSW="-L$i -lX11" + x_libraries="$i" + break + fi + done + else + if test "$x_libraries" = ""; then + XLIBSW=-lX11 + else + XLIBSW="-L$x_libraries -lX11" + fi + fi + if test "$XLIBSW" = nope ; then + AC_CHECK_LIB(Xwindow, XCreateWindow, XLIBSW=-lXwindow) + fi + if test "$XLIBSW" = nope ; then + AC_MSG_RESULT([could not find any! Using -lX11.]) + XLIBSW=-lX11 + fi + # TEA specific: + if test x"${XLIBSW}" != x ; then + PKG_LIBS="${PKG_LIBS} ${XLIBSW}" + fi +]) + +#-------------------------------------------------------------------- +# TEA_BLOCKING_STYLE +# +# The statements below check for systems where POSIX-style +# non-blocking I/O (O_NONBLOCK) doesn't work or is unimplemented. +# On these systems (mostly older ones), use the old BSD-style +# FIONBIO approach instead. +# +# Arguments: +# none +# +# Results: +# +# Defines some of the following vars: +# HAVE_SYS_IOCTL_H +# HAVE_SYS_FILIO_H +# USE_FIONBIO +# O_NONBLOCK +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_BLOCKING_STYLE], [ + AC_CHECK_HEADERS(sys/ioctl.h) + AC_CHECK_HEADERS(sys/filio.h) + TEA_CONFIG_SYSTEM + AC_MSG_CHECKING([FIONBIO vs. O_NONBLOCK for nonblocking I/O]) + case $system in + OSF*) + AC_DEFINE(USE_FIONBIO, 1, [Should we use FIONBIO?]) + AC_MSG_RESULT([FIONBIO]) + ;; + *) + AC_MSG_RESULT([O_NONBLOCK]) + ;; + esac +]) + +#-------------------------------------------------------------------- +# TEA_TIME_HANDLER +# +# Checks how the system deals with time.h, what time structures +# are used on the system, and what fields the structures have. +# +# Arguments: +# none +# +# Results: +# +# Defines some of the following vars: +# USE_DELTA_FOR_TZ +# HAVE_TM_GMTOFF +# HAVE_TM_TZADJ +# HAVE_TIMEZONE_VAR +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_TIME_HANDLER], [ + AC_CHECK_HEADERS(sys/time.h) + AC_HEADER_TIME + AC_STRUCT_TIMEZONE + + AC_CHECK_FUNCS(gmtime_r localtime_r) + + AC_CACHE_CHECK([tm_tzadj in struct tm], tcl_cv_member_tm_tzadj, [ + AC_TRY_COMPILE([#include ], [struct tm tm; tm.tm_tzadj;], + tcl_cv_member_tm_tzadj=yes, tcl_cv_member_tm_tzadj=no)]) + if test $tcl_cv_member_tm_tzadj = yes ; then + AC_DEFINE(HAVE_TM_TZADJ, 1, [Should we use the tm_tzadj field of struct tm?]) + fi + + AC_CACHE_CHECK([tm_gmtoff in struct tm], tcl_cv_member_tm_gmtoff, [ + AC_TRY_COMPILE([#include ], [struct tm tm; tm.tm_gmtoff;], + tcl_cv_member_tm_gmtoff=yes, tcl_cv_member_tm_gmtoff=no)]) + if test $tcl_cv_member_tm_gmtoff = yes ; then + AC_DEFINE(HAVE_TM_GMTOFF, 1, [Should we use the tm_gmtoff field of struct tm?]) + fi + + # + # Its important to include time.h in this check, as some systems + # (like convex) have timezone functions, etc. + # + AC_CACHE_CHECK([long timezone variable], tcl_cv_timezone_long, [ + AC_TRY_COMPILE([#include ], + [extern long timezone; + timezone += 1; + exit (0);], + tcl_cv_timezone_long=yes, tcl_cv_timezone_long=no)]) + if test $tcl_cv_timezone_long = yes ; then + AC_DEFINE(HAVE_TIMEZONE_VAR, 1, [Should we use the global timezone variable?]) + else + # + # On some systems (eg IRIX 6.2), timezone is a time_t and not a long. + # + AC_CACHE_CHECK([time_t timezone variable], tcl_cv_timezone_time, [ + AC_TRY_COMPILE([#include ], + [extern time_t timezone; + timezone += 1; + exit (0);], + tcl_cv_timezone_time=yes, tcl_cv_timezone_time=no)]) + if test $tcl_cv_timezone_time = yes ; then + AC_DEFINE(HAVE_TIMEZONE_VAR, 1, [Should we use the global timezone variable?]) + fi + fi +]) + +#-------------------------------------------------------------------- +# TEA_BUGGY_STRTOD +# +# Under Solaris 2.4, strtod returns the wrong value for the +# terminating character under some conditions. Check for this +# and if the problem exists use a substitute procedure +# "fixstrtod" (provided by Tcl) that corrects the error. +# Also, on Compaq's Tru64 Unix 5.0, +# strtod(" ") returns 0.0 instead of a failure to convert. +# +# Arguments: +# none +# +# Results: +# +# Might defines some of the following vars: +# strtod (=fixstrtod) +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_BUGGY_STRTOD], [ + AC_CHECK_FUNC(strtod, tcl_strtod=1, tcl_strtod=0) + if test "$tcl_strtod" = 1; then + AC_CACHE_CHECK([for Solaris2.4/Tru64 strtod bugs], tcl_cv_strtod_buggy,[ + AC_TRY_RUN([ + extern double strtod(); + int main() { + char *infString="Inf", *nanString="NaN", *spaceString=" "; + char *term; + double value; + value = strtod(infString, &term); + if ((term != infString) && (term[-1] == 0)) { + exit(1); + } + value = strtod(nanString, &term); + if ((term != nanString) && (term[-1] == 0)) { + exit(1); + } + value = strtod(spaceString, &term); + if (term == (spaceString+1)) { + exit(1); + } + exit(0); + }], tcl_cv_strtod_buggy=ok, tcl_cv_strtod_buggy=buggy, + tcl_cv_strtod_buggy=buggy)]) + if test "$tcl_cv_strtod_buggy" = buggy; then + AC_LIBOBJ([fixstrtod]) + USE_COMPAT=1 + AC_DEFINE(strtod, fixstrtod, [Do we want to use the strtod() in compat?]) + fi + fi +]) + +#-------------------------------------------------------------------- +# TEA_TCL_LINK_LIBS +# +# Search for the libraries needed to link the Tcl shell. +# Things like the math library (-lm) and socket stuff (-lsocket vs. +# -lnsl) are dealt with here. +# +# Arguments: +# Requires the following vars to be set in the Makefile: +# DL_LIBS (not in TEA, only needed in core) +# LIBS +# MATH_LIBS +# +# Results: +# +# Substitutes the following vars: +# TCL_LIBS +# MATH_LIBS +# +# Might append to the following vars: +# LIBS +# +# Might define the following vars: +# HAVE_NET_ERRNO_H +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_TCL_LINK_LIBS], [ + #-------------------------------------------------------------------- + # On a few very rare systems, all of the libm.a stuff is + # already in libc.a. Set compiler flags accordingly. + # Also, Linux requires the "ieee" library for math to work + # right (and it must appear before "-lm"). + #-------------------------------------------------------------------- + + AC_CHECK_FUNC(sin, MATH_LIBS="", MATH_LIBS="-lm") + AC_CHECK_LIB(ieee, main, [MATH_LIBS="-lieee $MATH_LIBS"]) + + #-------------------------------------------------------------------- + # Interactive UNIX requires -linet instead of -lsocket, plus it + # needs net/errno.h to define the socket-related error codes. + #-------------------------------------------------------------------- + + AC_CHECK_LIB(inet, main, [LIBS="$LIBS -linet"]) + AC_CHECK_HEADER(net/errno.h, [ + AC_DEFINE(HAVE_NET_ERRNO_H, 1, [Do we have ?])]) + + #-------------------------------------------------------------------- + # Check for the existence of the -lsocket and -lnsl libraries. + # The order here is important, so that they end up in the right + # order in the command line generated by make. Here are some + # special considerations: + # 1. Use "connect" and "accept" to check for -lsocket, and + # "gethostbyname" to check for -lnsl. + # 2. Use each function name only once: can't redo a check because + # autoconf caches the results of the last check and won't redo it. + # 3. Use -lnsl and -lsocket only if they supply procedures that + # aren't already present in the normal libraries. This is because + # IRIX 5.2 has libraries, but they aren't needed and they're + # bogus: they goof up name resolution if used. + # 4. On some SVR4 systems, can't use -lsocket without -lnsl too. + # To get around this problem, check for both libraries together + # if -lsocket doesn't work by itself. + #-------------------------------------------------------------------- + + tcl_checkBoth=0 + AC_CHECK_FUNC(connect, tcl_checkSocket=0, tcl_checkSocket=1) + if test "$tcl_checkSocket" = 1; then + AC_CHECK_FUNC(setsockopt, , [AC_CHECK_LIB(socket, setsockopt, + LIBS="$LIBS -lsocket", tcl_checkBoth=1)]) + fi + if test "$tcl_checkBoth" = 1; then + tk_oldLibs=$LIBS + LIBS="$LIBS -lsocket -lnsl" + AC_CHECK_FUNC(accept, tcl_checkNsl=0, [LIBS=$tk_oldLibs]) + fi + AC_CHECK_FUNC(gethostbyname, , [AC_CHECK_LIB(nsl, gethostbyname, + [LIBS="$LIBS -lnsl"])]) + + # TEA specific: Don't perform the eval of the libraries here because + # DL_LIBS won't be set until we call TEA_CONFIG_CFLAGS + + TCL_LIBS='${DL_LIBS} ${LIBS} ${MATH_LIBS}' + AC_SUBST(TCL_LIBS) + AC_SUBST(MATH_LIBS) +]) + +#-------------------------------------------------------------------- +# TEA_TCL_EARLY_FLAGS +# +# Check for what flags are needed to be passed so the correct OS +# features are available. +# +# Arguments: +# None +# +# Results: +# +# Might define the following vars: +# _ISOC99_SOURCE +# _LARGEFILE64_SOURCE +# _LARGEFILE_SOURCE64 +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_TCL_EARLY_FLAG],[ + AC_CACHE_VAL([tcl_cv_flag_]translit($1,[A-Z],[a-z]), + AC_TRY_COMPILE([$2], $3, [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no, + AC_TRY_COMPILE([[#define ]$1[ 1 +]$2], $3, + [tcl_cv_flag_]translit($1,[A-Z],[a-z])=yes, + [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no))) + if test ["x${tcl_cv_flag_]translit($1,[A-Z],[a-z])[}" = "xyes"] ; then + AC_DEFINE($1, 1, [Add the ]$1[ flag when building]) + tcl_flags="$tcl_flags $1" + fi +]) + +AC_DEFUN([TEA_TCL_EARLY_FLAGS],[ + AC_MSG_CHECKING([for required early compiler flags]) + tcl_flags="" + TEA_TCL_EARLY_FLAG(_ISOC99_SOURCE,[#include ], + [char *p = (char *)strtoll; char *q = (char *)strtoull;]) + TEA_TCL_EARLY_FLAG(_LARGEFILE64_SOURCE,[#include ], + [struct stat64 buf; int i = stat64("/", &buf);]) + TEA_TCL_EARLY_FLAG(_LARGEFILE_SOURCE64,[#include ], + [char *p = (char *)open64;]) + if test "x${tcl_flags}" = "x" ; then + AC_MSG_RESULT([none]) + else + AC_MSG_RESULT([${tcl_flags}]) + fi +]) + +#-------------------------------------------------------------------- +# TEA_TCL_64BIT_FLAGS +# +# Check for what is defined in the way of 64-bit features. +# +# Arguments: +# None +# +# Results: +# +# Might define the following vars: +# TCL_WIDE_INT_IS_LONG +# TCL_WIDE_INT_TYPE +# HAVE_STRUCT_DIRENT64 +# HAVE_STRUCT_STAT64 +# HAVE_TYPE_OFF64_T +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_TCL_64BIT_FLAGS], [ + AC_MSG_CHECKING([for 64-bit integer type]) + AC_CACHE_VAL(tcl_cv_type_64bit,[ + tcl_cv_type_64bit=none + # See if the compiler knows natively about __int64 + AC_TRY_COMPILE(,[__int64 value = (__int64) 0;], + tcl_type_64bit=__int64, tcl_type_64bit="long long") + # See if we should use long anyway Note that we substitute in the + # type that is our current guess for a 64-bit type inside this check + # program, so it should be modified only carefully... + AC_TRY_COMPILE(,[switch (0) { + case 1: case (sizeof(]${tcl_type_64bit}[)==sizeof(long)): ; + }],tcl_cv_type_64bit=${tcl_type_64bit})]) + if test "${tcl_cv_type_64bit}" = none ; then + AC_DEFINE(TCL_WIDE_INT_IS_LONG, 1, [Are wide integers to be implemented with C 'long's?]) + AC_MSG_RESULT([using long]) + elif test "${tcl_cv_type_64bit}" = "__int64" \ + -a "${TEA_PLATFORM}" = "windows" ; then + # TEA specific: We actually want to use the default tcl.h checks in + # this case to handle both TCL_WIDE_INT_TYPE and TCL_LL_MODIFIER* + AC_MSG_RESULT([using Tcl header defaults]) + else + AC_DEFINE_UNQUOTED(TCL_WIDE_INT_TYPE,${tcl_cv_type_64bit}, + [What type should be used to define wide integers?]) + AC_MSG_RESULT([${tcl_cv_type_64bit}]) + + # Now check for auxiliary declarations + AC_CACHE_CHECK([for struct dirent64], tcl_cv_struct_dirent64,[ + AC_TRY_COMPILE([#include +#include ],[struct dirent64 p;], + tcl_cv_struct_dirent64=yes,tcl_cv_struct_dirent64=no)]) + if test "x${tcl_cv_struct_dirent64}" = "xyes" ; then + AC_DEFINE(HAVE_STRUCT_DIRENT64, 1, [Is 'struct dirent64' in ?]) + fi + + AC_CACHE_CHECK([for struct stat64], tcl_cv_struct_stat64,[ + AC_TRY_COMPILE([#include ],[struct stat64 p; +], + tcl_cv_struct_stat64=yes,tcl_cv_struct_stat64=no)]) + if test "x${tcl_cv_struct_stat64}" = "xyes" ; then + AC_DEFINE(HAVE_STRUCT_STAT64, 1, [Is 'struct stat64' in ?]) + fi + + AC_CHECK_FUNCS(open64 lseek64) + AC_MSG_CHECKING([for off64_t]) + AC_CACHE_VAL(tcl_cv_type_off64_t,[ + AC_TRY_COMPILE([#include ],[off64_t offset; +], + tcl_cv_type_off64_t=yes,tcl_cv_type_off64_t=no)]) + dnl Define HAVE_TYPE_OFF64_T only when the off64_t type and the + dnl functions lseek64 and open64 are defined. + if test "x${tcl_cv_type_off64_t}" = "xyes" && \ + test "x${ac_cv_func_lseek64}" = "xyes" && \ + test "x${ac_cv_func_open64}" = "xyes" ; then + AC_DEFINE(HAVE_TYPE_OFF64_T, 1, [Is off64_t in ?]) + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + fi + fi +]) + +## +## Here ends the standard Tcl configuration bits and starts the +## TEA specific functions +## + +#------------------------------------------------------------------------ +# TEA_INIT -- +# +# Init various Tcl Extension Architecture (TEA) variables. +# This should be the first called TEA_* macro. +# +# Arguments: +# none +# +# Results: +# +# Defines and substs the following vars: +# CYGPATH +# EXEEXT +# Defines only: +# TEA_VERSION +# TEA_INITED +# TEA_PLATFORM (windows or unix) +# +# "cygpath" is used on windows to generate native path names for include +# files. These variables should only be used with the compiler and linker +# since they generate native path names. +# +# EXEEXT +# Select the executable extension based on the host type. This +# is a lightweight replacement for AC_EXEEXT that doesn't require +# a compiler. +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_INIT], [ + # TEA extensions pass this us the version of TEA they think they + # are compatible with. + TEA_VERSION="3.9" + + AC_MSG_CHECKING([for correct TEA configuration]) + if test x"${PACKAGE_NAME}" = x ; then + AC_MSG_ERROR([ +The PACKAGE_NAME variable must be defined by your TEA configure.in]) + fi + if test x"$1" = x ; then + AC_MSG_ERROR([ +TEA version not specified.]) + elif test "$1" != "${TEA_VERSION}" ; then + AC_MSG_RESULT([warning: requested TEA version "$1", have "${TEA_VERSION}"]) + else + AC_MSG_RESULT([ok (TEA ${TEA_VERSION})]) + fi + + # If the user did not set CFLAGS, set it now to keep macros + # like AC_PROG_CC and AC_TRY_COMPILE from adding "-g -O2". + if test "${CFLAGS+set}" != "set" ; then + CFLAGS="" + fi + + case "`uname -s`" in + *win32*|*WIN32*|*MINGW32_*) + AC_CHECK_PROG(CYGPATH, cygpath, cygpath -w, echo) + EXEEXT=".exe" + TEA_PLATFORM="windows" + ;; + *CYGWIN_*) + CYGPATH=echo + EXEEXT=".exe" + # TEA_PLATFORM is determined later in LOAD_TCLCONFIG + ;; + *) + CYGPATH=echo + # Maybe we are cross-compiling.... + case ${host_alias} in + *mingw32*) + EXEEXT=".exe" + TEA_PLATFORM="windows" + ;; + *) + EXEEXT="" + TEA_PLATFORM="unix" + ;; + esac + ;; + esac + + # Check if exec_prefix is set. If not use fall back to prefix. + # Note when adjusted, so that TEA_PREFIX can correct for this. + # This is needed for recursive configures, since autoconf propagates + # $prefix, but not $exec_prefix (doh!). + if test x$exec_prefix = xNONE ; then + exec_prefix_default=yes + exec_prefix=$prefix + fi + + AC_MSG_NOTICE([configuring ${PACKAGE_NAME} ${PACKAGE_VERSION}]) + + AC_SUBST(EXEEXT) + AC_SUBST(CYGPATH) + + # This package name must be replaced statically for AC_SUBST to work + AC_SUBST(PKG_LIB_FILE) + # Substitute STUB_LIB_FILE in case package creates a stub library too. + AC_SUBST(PKG_STUB_LIB_FILE) + + # We AC_SUBST these here to ensure they are subst'ed, + # in case the user doesn't call TEA_ADD_... + AC_SUBST(PKG_STUB_SOURCES) + AC_SUBST(PKG_STUB_OBJECTS) + AC_SUBST(PKG_TCL_SOURCES) + AC_SUBST(PKG_HEADERS) + AC_SUBST(PKG_INCLUDES) + AC_SUBST(PKG_LIBS) + AC_SUBST(PKG_CFLAGS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_SOURCES -- +# +# Specify one or more source files. Users should check for +# the right platform before adding to their list. +# It is not important to specify the directory, as long as it is +# in the generic, win or unix subdirectory of $(srcdir). +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_SOURCES +# PKG_OBJECTS +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_SOURCES], [ + vars="$@" + for i in $vars; do + case $i in + [\$]*) + # allow $-var names + PKG_SOURCES="$PKG_SOURCES $i" + PKG_OBJECTS="$PKG_OBJECTS $i" + ;; + *) + # check for existence - allows for generic/win/unix VPATH + # To add more dirs here (like 'src'), you have to update VPATH + # in Makefile.in as well + if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ + -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ + -a ! -f "${srcdir}/macosx/$i" \ + ; then + AC_MSG_ERROR([could not find source file '$i']) + fi + PKG_SOURCES="$PKG_SOURCES $i" + # this assumes it is in a VPATH dir + i=`basename $i` + # handle user calling this before or after TEA_SETUP_COMPILER + if test x"${OBJEXT}" != x ; then + j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}" + else + j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}" + fi + PKG_OBJECTS="$PKG_OBJECTS $j" + ;; + esac + done + AC_SUBST(PKG_SOURCES) + AC_SUBST(PKG_OBJECTS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_STUB_SOURCES -- +# +# Specify one or more source files. Users should check for +# the right platform before adding to their list. +# It is not important to specify the directory, as long as it is +# in the generic, win or unix subdirectory of $(srcdir). +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_STUB_SOURCES +# PKG_STUB_OBJECTS +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_STUB_SOURCES], [ + vars="$@" + for i in $vars; do + # check for existence - allows for generic/win/unix VPATH + if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ + -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ + -a ! -f "${srcdir}/macosx/$i" \ + ; then + AC_MSG_ERROR([could not find stub source file '$i']) + fi + PKG_STUB_SOURCES="$PKG_STUB_SOURCES $i" + # this assumes it is in a VPATH dir + i=`basename $i` + # handle user calling this before or after TEA_SETUP_COMPILER + if test x"${OBJEXT}" != x ; then + j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}" + else + j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}" + fi + PKG_STUB_OBJECTS="$PKG_STUB_OBJECTS $j" + done + AC_SUBST(PKG_STUB_SOURCES) + AC_SUBST(PKG_STUB_OBJECTS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_TCL_SOURCES -- +# +# Specify one or more Tcl source files. These should be platform +# independent runtime files. +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_TCL_SOURCES +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_TCL_SOURCES], [ + vars="$@" + for i in $vars; do + # check for existence, be strict because it is installed + if test ! -f "${srcdir}/$i" ; then + AC_MSG_ERROR([could not find tcl source file '${srcdir}/$i']) + fi + PKG_TCL_SOURCES="$PKG_TCL_SOURCES $i" + done + AC_SUBST(PKG_TCL_SOURCES) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_HEADERS -- +# +# Specify one or more source headers. Users should check for +# the right platform before adding to their list. +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_HEADERS +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_HEADERS], [ + vars="$@" + for i in $vars; do + # check for existence, be strict because it is installed + if test ! -f "${srcdir}/$i" ; then + AC_MSG_ERROR([could not find header file '${srcdir}/$i']) + fi + PKG_HEADERS="$PKG_HEADERS $i" + done + AC_SUBST(PKG_HEADERS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_INCLUDES -- +# +# Specify one or more include dirs. Users should check for +# the right platform before adding to their list. +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_INCLUDES +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_INCLUDES], [ + vars="$@" + for i in $vars; do + PKG_INCLUDES="$PKG_INCLUDES $i" + done + AC_SUBST(PKG_INCLUDES) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_LIBS -- +# +# Specify one or more libraries. Users should check for +# the right platform before adding to their list. For Windows, +# libraries provided in "foo.lib" format will be converted to +# "-lfoo" when using GCC (mingw). +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_LIBS +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_LIBS], [ + vars="$@" + for i in $vars; do + if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then + # Convert foo.lib to -lfoo for GCC. No-op if not *.lib + i=`echo "$i" | sed -e 's/^\([[^-]].*\)\.lib[$]/-l\1/i'` + fi + PKG_LIBS="$PKG_LIBS $i" + done + AC_SUBST(PKG_LIBS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_CFLAGS -- +# +# Specify one or more CFLAGS. Users should check for +# the right platform before adding to their list. +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_CFLAGS +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_CFLAGS], [ + PKG_CFLAGS="$PKG_CFLAGS $@" + AC_SUBST(PKG_CFLAGS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_CLEANFILES -- +# +# Specify one or more CLEANFILES. +# +# Arguments: +# one or more file names to clean target +# +# Results: +# +# Appends to CLEANFILES, already defined for subst in LOAD_TCLCONFIG +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_CLEANFILES], [ + CLEANFILES="$CLEANFILES $@" +]) + +#------------------------------------------------------------------------ +# TEA_PREFIX -- +# +# Handle the --prefix=... option by defaulting to what Tcl gave +# +# Arguments: +# none +# +# Results: +# +# If --prefix or --exec-prefix was not specified, $prefix and +# $exec_prefix will be set to the values given to Tcl when it was +# configured. +#------------------------------------------------------------------------ +AC_DEFUN([TEA_PREFIX], [ + if test "${prefix}" = "NONE"; then + prefix_default=yes + if test x"${TCL_PREFIX}" != x; then + AC_MSG_NOTICE([--prefix defaulting to TCL_PREFIX ${TCL_PREFIX}]) + prefix=${TCL_PREFIX} + else + AC_MSG_NOTICE([--prefix defaulting to /usr/local]) + prefix=/usr/local + fi + fi + if test "${exec_prefix}" = "NONE" -a x"${prefix_default}" = x"yes" \ + -o x"${exec_prefix_default}" = x"yes" ; then + if test x"${TCL_EXEC_PREFIX}" != x; then + AC_MSG_NOTICE([--exec-prefix defaulting to TCL_EXEC_PREFIX ${TCL_EXEC_PREFIX}]) + exec_prefix=${TCL_EXEC_PREFIX} + else + AC_MSG_NOTICE([--exec-prefix defaulting to ${prefix}]) + exec_prefix=$prefix + fi + fi +]) + +#------------------------------------------------------------------------ +# TEA_SETUP_COMPILER_CC -- +# +# Do compiler checks the way we want. This is just a replacement +# for AC_PROG_CC in TEA configure.in files to make them cleaner. +# +# Arguments: +# none +# +# Results: +# +# Sets up CC var and other standard bits we need to make executables. +#------------------------------------------------------------------------ +AC_DEFUN([TEA_SETUP_COMPILER_CC], [ + # Don't put any macros that use the compiler (e.g. AC_TRY_COMPILE) + # in this macro, they need to go into TEA_SETUP_COMPILER instead. + + AC_PROG_CC + AC_PROG_CPP + + INSTALL="\$(SHELL) \$(srcdir)/tclconfig/install-sh -c" + AC_SUBST(INSTALL) + + #-------------------------------------------------------------------- + # Checks to see if the make program sets the $MAKE variable. + #-------------------------------------------------------------------- + + AC_PROG_MAKE_SET + + #-------------------------------------------------------------------- + # Find ranlib + #-------------------------------------------------------------------- + + AC_CHECK_TOOL(RANLIB, ranlib) + + #-------------------------------------------------------------------- + # Determines the correct binary file extension (.o, .obj, .exe etc.) + #-------------------------------------------------------------------- + + AC_OBJEXT + AC_EXEEXT +]) + +#------------------------------------------------------------------------ +# TEA_SETUP_COMPILER -- +# +# Do compiler checks that use the compiler. This must go after +# TEA_SETUP_COMPILER_CC, which does the actual compiler check. +# +# Arguments: +# none +# +# Results: +# +# Sets up CC var and other standard bits we need to make executables. +#------------------------------------------------------------------------ +AC_DEFUN([TEA_SETUP_COMPILER], [ + # Any macros that use the compiler (e.g. AC_TRY_COMPILE) have to go here. + AC_REQUIRE([TEA_SETUP_COMPILER_CC]) + + #------------------------------------------------------------------------ + # If we're using GCC, see if the compiler understands -pipe. If so, use it. + # It makes compiling go faster. (This is only a performance feature.) + #------------------------------------------------------------------------ + + if test -z "$no_pipe" -a -n "$GCC"; then + AC_CACHE_CHECK([if the compiler understands -pipe], + tcl_cv_cc_pipe, [ + hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -pipe" + AC_TRY_COMPILE(,, tcl_cv_cc_pipe=yes, tcl_cv_cc_pipe=no) + CFLAGS=$hold_cflags]) + if test $tcl_cv_cc_pipe = yes; then + CFLAGS="$CFLAGS -pipe" + fi + fi + + #-------------------------------------------------------------------- + # Common compiler flag setup + #-------------------------------------------------------------------- + + AC_C_BIGENDIAN + if test "${TEA_PLATFORM}" = "unix" ; then + TEA_TCL_LINK_LIBS + TEA_MISSING_POSIX_HEADERS + # Let the user call this, because if it triggers, they will + # need a compat/strtod.c that is correct. Users can also + # use Tcl_GetDouble(FromObj) instead. + #TEA_BUGGY_STRTOD + fi +]) + +#------------------------------------------------------------------------ +# TEA_MAKE_LIB -- +# +# Generate a line that can be used to build a shared/unshared library +# in a platform independent manner. +# +# Arguments: +# none +# +# Requires: +# +# Results: +# +# Defines the following vars: +# CFLAGS - Done late here to note disturb other AC macros +# MAKE_LIB - Command to execute to build the Tcl library; +# differs depending on whether or not Tcl is being +# compiled as a shared library. +# MAKE_SHARED_LIB Makefile rule for building a shared library +# MAKE_STATIC_LIB Makefile rule for building a static library +# MAKE_STUB_LIB Makefile rule for building a stub library +# VC_MANIFEST_EMBED_DLL Makefile rule for embedded VC manifest in DLL +# VC_MANIFEST_EMBED_EXE Makefile rule for embedded VC manifest in EXE +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_MAKE_LIB], [ + if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes"; then + MAKE_STATIC_LIB="\${STLIB_LD} -out:\[$]@ \$(PKG_OBJECTS)" + MAKE_SHARED_LIB="\${SHLIB_LD} \${SHLIB_LD_LIBS} \${LDFLAGS_DEFAULT} -out:\[$]@ \$(PKG_OBJECTS)" + AC_EGREP_CPP([manifest needed], [ +#if defined(_MSC_VER) && _MSC_VER >= 1400 +print("manifest needed") +#endif + ], [ + # Could do a CHECK_PROG for mt, but should always be with MSVC8+ + VC_MANIFEST_EMBED_DLL="if test -f \[$]@.manifest ; then mt.exe -nologo -manifest \[$]@.manifest -outputresource:\[$]@\;2 ; fi" + VC_MANIFEST_EMBED_EXE="if test -f \[$]@.manifest ; then mt.exe -nologo -manifest \[$]@.manifest -outputresource:\[$]@\;1 ; fi" + MAKE_SHARED_LIB="${MAKE_SHARED_LIB} ; ${VC_MANIFEST_EMBED_DLL}" + TEA_ADD_CLEANFILES([*.manifest]) + ]) + MAKE_STUB_LIB="\${STLIB_LD} -out:\[$]@ \$(PKG_STUB_OBJECTS)" + else + MAKE_STATIC_LIB="\${STLIB_LD} \[$]@ \$(PKG_OBJECTS)" + MAKE_SHARED_LIB="\${SHLIB_LD} -o \[$]@ \$(PKG_OBJECTS) \${SHLIB_LD_LIBS}" + MAKE_STUB_LIB="\${STLIB_LD} \[$]@ \$(PKG_STUB_OBJECTS)" + fi + + if test "${SHARED_BUILD}" = "1" ; then + MAKE_LIB="${MAKE_SHARED_LIB} " + else + MAKE_LIB="${MAKE_STATIC_LIB} " + fi + + #-------------------------------------------------------------------- + # Shared libraries and static libraries have different names. + # Use the double eval to make sure any variables in the suffix is + # substituted. (@@@ Might not be necessary anymore) + #-------------------------------------------------------------------- + + if test "${TEA_PLATFORM}" = "windows" ; then + if test "${SHARED_BUILD}" = "1" ; then + # We force the unresolved linking of symbols that are really in + # the private libraries of Tcl and Tk. + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}`\"" + if test x"${TK_BIN_DIR}" != x ; then + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TK_BIN_DIR}/${TK_STUB_LIB_FILE}`\"" + fi + eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" + else + eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" + fi + # Some packages build their own stubs libraries + eval eval "PKG_STUB_LIB_FILE=${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}" + if test "$GCC" = "yes"; then + PKG_STUB_LIB_FILE=lib${PKG_STUB_LIB_FILE} + fi + # These aren't needed on Windows (either MSVC or gcc) + RANLIB=: + RANLIB_STUB=: + else + RANLIB_STUB="${RANLIB}" + if test "${SHARED_BUILD}" = "1" ; then + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TCL_STUB_LIB_SPEC}" + if test x"${TK_BIN_DIR}" != x ; then + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TK_STUB_LIB_SPEC}" + fi + eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" + RANLIB=: + else + eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" + fi + # Some packages build their own stubs libraries + eval eval "PKG_STUB_LIB_FILE=lib${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}" + fi + + # These are escaped so that only CFLAGS is picked up at configure time. + # The other values will be substituted at make time. + CFLAGS="${CFLAGS} \${CFLAGS_DEFAULT} \${CFLAGS_WARNING}" + if test "${SHARED_BUILD}" = "1" ; then + CFLAGS="${CFLAGS} \${SHLIB_CFLAGS}" + fi + + AC_SUBST(MAKE_LIB) + AC_SUBST(MAKE_SHARED_LIB) + AC_SUBST(MAKE_STATIC_LIB) + AC_SUBST(MAKE_STUB_LIB) + AC_SUBST(RANLIB_STUB) + AC_SUBST(VC_MANIFEST_EMBED_DLL) + AC_SUBST(VC_MANIFEST_EMBED_EXE) +]) + +#------------------------------------------------------------------------ +# TEA_LIB_SPEC -- +# +# Compute the name of an existing object library located in libdir +# from the given base name and produce the appropriate linker flags. +# +# Arguments: +# basename The base name of the library without version +# numbers, extensions, or "lib" prefixes. +# extra_dir Extra directory in which to search for the +# library. This location is used first, then +# $prefix/$exec-prefix, then some defaults. +# +# Requires: +# TEA_INIT and TEA_PREFIX must be called first. +# +# Results: +# +# Defines the following vars: +# ${basename}_LIB_NAME The computed library name. +# ${basename}_LIB_SPEC The computed linker flags. +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_LIB_SPEC], [ + AC_MSG_CHECKING([for $1 library]) + + # Look in exec-prefix for the library (defined by TEA_PREFIX). + + tea_lib_name_dir="${exec_prefix}/lib" + + # Or in a user-specified location. + + if test x"$2" != x ; then + tea_extra_lib_dir=$2 + else + tea_extra_lib_dir=NONE + fi + + for i in \ + `ls -dr ${tea_extra_lib_dir}/$1[[0-9]]*.lib 2>/dev/null ` \ + `ls -dr ${tea_extra_lib_dir}/lib$1[[0-9]]* 2>/dev/null ` \ + `ls -dr ${tea_lib_name_dir}/$1[[0-9]]*.lib 2>/dev/null ` \ + `ls -dr ${tea_lib_name_dir}/lib$1[[0-9]]* 2>/dev/null ` \ + `ls -dr /usr/lib/$1[[0-9]]*.lib 2>/dev/null ` \ + `ls -dr /usr/lib/lib$1[[0-9]]* 2>/dev/null ` \ + `ls -dr /usr/lib64/$1[[0-9]]*.lib 2>/dev/null ` \ + `ls -dr /usr/lib64/lib$1[[0-9]]* 2>/dev/null ` \ + `ls -dr /usr/local/lib/$1[[0-9]]*.lib 2>/dev/null ` \ + `ls -dr /usr/local/lib/lib$1[[0-9]]* 2>/dev/null ` ; do + if test -f "$i" ; then + tea_lib_name_dir=`dirname $i` + $1_LIB_NAME=`basename $i` + $1_LIB_PATH_NAME=$i + break + fi + done + + if test "${TEA_PLATFORM}" = "windows"; then + $1_LIB_SPEC=\"`${CYGPATH} ${$1_LIB_PATH_NAME} 2>/dev/null`\" + else + # Strip off the leading "lib" and trailing ".a" or ".so" + + tea_lib_name_lib=`echo ${$1_LIB_NAME}|sed -e 's/^lib//' -e 's/\.[[^.]]*$//' -e 's/\.so.*//'` + $1_LIB_SPEC="-L${tea_lib_name_dir} -l${tea_lib_name_lib}" + fi + + if test "x${$1_LIB_NAME}" = x ; then + AC_MSG_ERROR([not found]) + else + AC_MSG_RESULT([${$1_LIB_SPEC}]) + fi +]) + +#------------------------------------------------------------------------ +# TEA_PRIVATE_TCL_HEADERS -- +# +# Locate the private Tcl include files +# +# Arguments: +# +# Requires: +# TCL_SRC_DIR Assumes that TEA_LOAD_TCLCONFIG has +# already been called. +# +# Results: +# +# Substitutes the following vars: +# TCL_TOP_DIR_NATIVE +# TCL_INCLUDES +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PRIVATE_TCL_HEADERS], [ + # Allow for --with-tclinclude to take effect and define ${ac_cv_c_tclh} + AC_REQUIRE([TEA_PUBLIC_TCL_HEADERS]) + AC_MSG_CHECKING([for Tcl private include files]) + + TCL_SRC_DIR_NATIVE=`${CYGPATH} ${TCL_SRC_DIR}` + TCL_TOP_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}\" + + # Check to see if tclPort.h isn't already with the public headers + # Don't look for tclInt.h because that resides with tcl.h in the core + # sources, but the Port headers are in a different directory + if test "${TEA_PLATFORM}" = "windows" -a \ + -f "${ac_cv_c_tclh}/tclWinPort.h"; then + result="private headers found with public headers" + elif test "${TEA_PLATFORM}" = "unix" -a \ + -f "${ac_cv_c_tclh}/tclUnixPort.h"; then + result="private headers found with public headers" + else + TCL_GENERIC_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/generic\" + if test "${TEA_PLATFORM}" = "windows"; then + TCL_PLATFORM_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/win\" + else + TCL_PLATFORM_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/unix\" + fi + # Overwrite the previous TCL_INCLUDES as this should capture both + # public and private headers in the same set. + # We want to ensure these are substituted so as not to require + # any *_NATIVE vars be defined in the Makefile + TCL_INCLUDES="-I${TCL_GENERIC_DIR_NATIVE} -I${TCL_PLATFORM_DIR_NATIVE}" + if test "`uname -s`" = "Darwin"; then + # If Tcl was built as a framework, attempt to use + # the framework's Headers and PrivateHeaders directories + case ${TCL_DEFS} in + *TCL_FRAMEWORK*) + if test -d "${TCL_BIN_DIR}/Headers" -a \ + -d "${TCL_BIN_DIR}/PrivateHeaders"; then + TCL_INCLUDES="-I\"${TCL_BIN_DIR}/Headers\" -I\"${TCL_BIN_DIR}/PrivateHeaders\" ${TCL_INCLUDES}" + else + TCL_INCLUDES="${TCL_INCLUDES} ${TCL_INCLUDE_SPEC} `echo "${TCL_INCLUDE_SPEC}" | sed -e 's/Headers/PrivateHeaders/'`" + fi + ;; + esac + result="Using ${TCL_INCLUDES}" + else + if test ! -f "${TCL_SRC_DIR}/generic/tclInt.h" ; then + AC_MSG_ERROR([Cannot find private header tclInt.h in ${TCL_SRC_DIR}]) + fi + result="Using srcdir found in tclConfig.sh: ${TCL_SRC_DIR}" + fi + fi + + AC_SUBST(TCL_TOP_DIR_NATIVE) + + AC_SUBST(TCL_INCLUDES) + AC_MSG_RESULT([${result}]) +]) + +#------------------------------------------------------------------------ +# TEA_PUBLIC_TCL_HEADERS -- +# +# Locate the installed public Tcl header files +# +# Arguments: +# None. +# +# Requires: +# CYGPATH must be set +# +# Results: +# +# Adds a --with-tclinclude switch to configure. +# Result is cached. +# +# Substitutes the following vars: +# TCL_INCLUDES +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PUBLIC_TCL_HEADERS], [ + AC_MSG_CHECKING([for Tcl public headers]) + + AC_ARG_WITH(tclinclude, [ --with-tclinclude directory containing the public Tcl header files], with_tclinclude=${withval}) + + AC_CACHE_VAL(ac_cv_c_tclh, [ + # Use the value from --with-tclinclude, if it was given + + if test x"${with_tclinclude}" != x ; then + if test -f "${with_tclinclude}/tcl.h" ; then + ac_cv_c_tclh=${with_tclinclude} + else + AC_MSG_ERROR([${with_tclinclude} directory does not contain tcl.h]) + fi + else + list="" + if test "`uname -s`" = "Darwin"; then + # If Tcl was built as a framework, attempt to use + # the framework's Headers directory + case ${TCL_DEFS} in + *TCL_FRAMEWORK*) + list="`ls -d ${TCL_BIN_DIR}/Headers 2>/dev/null`" + ;; + esac + fi + + # Look in the source dir only if Tcl is not installed, + # and in that situation, look there before installed locations. + if test -f "${TCL_BIN_DIR}/Makefile" ; then + list="$list `ls -d ${TCL_SRC_DIR}/generic 2>/dev/null`" + fi + + # Check order: pkg --prefix location, Tcl's --prefix location, + # relative to directory of tclConfig.sh. + + eval "temp_includedir=${includedir}" + list="$list \ + `ls -d ${temp_includedir} 2>/dev/null` \ + `ls -d ${TCL_PREFIX}/include 2>/dev/null` \ + `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null`" + if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then + list="$list /usr/local/include /usr/include" + if test x"${TCL_INCLUDE_SPEC}" != x ; then + d=`echo "${TCL_INCLUDE_SPEC}" | sed -e 's/^-I//'` + list="$list `ls -d ${d} 2>/dev/null`" + fi + fi + for i in $list ; do + if test -f "$i/tcl.h" ; then + ac_cv_c_tclh=$i + break + fi + done + fi + ]) + + # Print a message based on how we determined the include path + + if test x"${ac_cv_c_tclh}" = x ; then + AC_MSG_ERROR([tcl.h not found. Please specify its location with --with-tclinclude]) + else + AC_MSG_RESULT([${ac_cv_c_tclh}]) + fi + + # Convert to a native path and substitute into the output files. + + INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tclh}` + + TCL_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" + + AC_SUBST(TCL_INCLUDES) +]) + +#------------------------------------------------------------------------ +# TEA_PRIVATE_TK_HEADERS -- +# +# Locate the private Tk include files +# +# Arguments: +# +# Requires: +# TK_SRC_DIR Assumes that TEA_LOAD_TKCONFIG has +# already been called. +# +# Results: +# +# Substitutes the following vars: +# TK_INCLUDES +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PRIVATE_TK_HEADERS], [ + # Allow for --with-tkinclude to take effect and define ${ac_cv_c_tkh} + AC_REQUIRE([TEA_PUBLIC_TK_HEADERS]) + AC_MSG_CHECKING([for Tk private include files]) + + TK_SRC_DIR_NATIVE=`${CYGPATH} ${TK_SRC_DIR}` + TK_TOP_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}\" + + # Check to see if tkPort.h isn't already with the public headers + # Don't look for tkInt.h because that resides with tk.h in the core + # sources, but the Port headers are in a different directory + if test "${TEA_PLATFORM}" = "windows" -a \ + -f "${ac_cv_c_tkh}/tkWinPort.h"; then + result="private headers found with public headers" + elif test "${TEA_PLATFORM}" = "unix" -a \ + -f "${ac_cv_c_tkh}/tkUnixPort.h"; then + result="private headers found with public headers" + else + TK_GENERIC_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/generic\" + TK_XLIB_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/xlib\" + if test "${TEA_PLATFORM}" = "windows"; then + TK_PLATFORM_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/win\" + else + TK_PLATFORM_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/unix\" + fi + # Overwrite the previous TK_INCLUDES as this should capture both + # public and private headers in the same set. + # We want to ensure these are substituted so as not to require + # any *_NATIVE vars be defined in the Makefile + TK_INCLUDES="-I${TK_GENERIC_DIR_NATIVE} -I${TK_PLATFORM_DIR_NATIVE}" + # Detect and add ttk subdir + if test -d "${TK_SRC_DIR}/generic/ttk"; then + TK_INCLUDES="${TK_INCLUDES} -I\"${TK_SRC_DIR_NATIVE}/generic/ttk\"" + fi + if test "${TEA_WINDOWINGSYSTEM}" != "x11"; then + TK_INCLUDES="${TK_INCLUDES} -I\"${TK_XLIB_DIR_NATIVE}\"" + fi + if test "${TEA_WINDOWINGSYSTEM}" = "aqua"; then + TK_INCLUDES="${TK_INCLUDES} -I\"${TK_SRC_DIR_NATIVE}/macosx\"" + fi + if test "`uname -s`" = "Darwin"; then + # If Tk was built as a framework, attempt to use + # the framework's Headers and PrivateHeaders directories + case ${TK_DEFS} in + *TK_FRAMEWORK*) + if test -d "${TK_BIN_DIR}/Headers" -a \ + -d "${TK_BIN_DIR}/PrivateHeaders"; then + TK_INCLUDES="-I\"${TK_BIN_DIR}/Headers\" -I\"${TK_BIN_DIR}/PrivateHeaders\" ${TK_INCLUDES}" + else + TK_INCLUDES="${TK_INCLUDES} ${TK_INCLUDE_SPEC} `echo "${TK_INCLUDE_SPEC}" | sed -e 's/Headers/PrivateHeaders/'`" + fi + ;; + esac + result="Using ${TK_INCLUDES}" + else + if test ! -f "${TK_SRC_DIR}/generic/tkInt.h" ; then + AC_MSG_ERROR([Cannot find private header tkInt.h in ${TK_SRC_DIR}]) + fi + result="Using srcdir found in tkConfig.sh: ${TK_SRC_DIR}" + fi + fi + + AC_SUBST(TK_TOP_DIR_NATIVE) + AC_SUBST(TK_XLIB_DIR_NATIVE) + + AC_SUBST(TK_INCLUDES) + AC_MSG_RESULT([${result}]) +]) + +#------------------------------------------------------------------------ +# TEA_PUBLIC_TK_HEADERS -- +# +# Locate the installed public Tk header files +# +# Arguments: +# None. +# +# Requires: +# CYGPATH must be set +# +# Results: +# +# Adds a --with-tkinclude switch to configure. +# Result is cached. +# +# Substitutes the following vars: +# TK_INCLUDES +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PUBLIC_TK_HEADERS], [ + AC_MSG_CHECKING([for Tk public headers]) + + AC_ARG_WITH(tkinclude, [ --with-tkinclude directory containing the public Tk header files], with_tkinclude=${withval}) + + AC_CACHE_VAL(ac_cv_c_tkh, [ + # Use the value from --with-tkinclude, if it was given + + if test x"${with_tkinclude}" != x ; then + if test -f "${with_tkinclude}/tk.h" ; then + ac_cv_c_tkh=${with_tkinclude} + else + AC_MSG_ERROR([${with_tkinclude} directory does not contain tk.h]) + fi + else + list="" + if test "`uname -s`" = "Darwin"; then + # If Tk was built as a framework, attempt to use + # the framework's Headers directory. + case ${TK_DEFS} in + *TK_FRAMEWORK*) + list="`ls -d ${TK_BIN_DIR}/Headers 2>/dev/null`" + ;; + esac + fi + + # Look in the source dir only if Tk is not installed, + # and in that situation, look there before installed locations. + if test -f "${TK_BIN_DIR}/Makefile" ; then + list="$list `ls -d ${TK_SRC_DIR}/generic 2>/dev/null`" + fi + + # Check order: pkg --prefix location, Tk's --prefix location, + # relative to directory of tkConfig.sh, Tcl's --prefix location, + # relative to directory of tclConfig.sh. + + eval "temp_includedir=${includedir}" + list="$list \ + `ls -d ${temp_includedir} 2>/dev/null` \ + `ls -d ${TK_PREFIX}/include 2>/dev/null` \ + `ls -d ${TK_BIN_DIR}/../include 2>/dev/null` \ + `ls -d ${TCL_PREFIX}/include 2>/dev/null` \ + `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null`" + if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then + list="$list /usr/local/include /usr/include" + if test x"${TK_INCLUDE_SPEC}" != x ; then + d=`echo "${TK_INCLUDE_SPEC}" | sed -e 's/^-I//'` + list="$list `ls -d ${d} 2>/dev/null`" + fi + fi + for i in $list ; do + if test -f "$i/tk.h" ; then + ac_cv_c_tkh=$i + break + fi + done + fi + ]) + + # Print a message based on how we determined the include path + + if test x"${ac_cv_c_tkh}" = x ; then + AC_MSG_ERROR([tk.h not found. Please specify its location with --with-tkinclude]) + else + AC_MSG_RESULT([${ac_cv_c_tkh}]) + fi + + # Convert to a native path and substitute into the output files. + + INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tkh}` + + TK_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" + + AC_SUBST(TK_INCLUDES) + + if test "${TEA_WINDOWINGSYSTEM}" != "x11"; then + # On Windows and Aqua, we need the X compat headers + AC_MSG_CHECKING([for X11 header files]) + if test ! -r "${INCLUDE_DIR_NATIVE}/X11/Xlib.h"; then + INCLUDE_DIR_NATIVE="`${CYGPATH} ${TK_SRC_DIR}/xlib`" + TK_XINCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" + AC_SUBST(TK_XINCLUDES) + fi + AC_MSG_RESULT([${INCLUDE_DIR_NATIVE}]) + fi +]) + +#------------------------------------------------------------------------ +# TEA_PATH_CONFIG -- +# +# Locate the ${1}Config.sh file and perform a sanity check on +# the ${1} compile flags. These are used by packages like +# [incr Tk] that load *Config.sh files from more than Tcl and Tk. +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --with-$1=... +# +# Defines the following vars: +# $1_BIN_DIR Full path to the directory containing +# the $1Config.sh file +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PATH_CONFIG], [ + # + # Ok, lets find the $1 configuration + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-$1 + # + + if test x"${no_$1}" = x ; then + # we reset no_$1 in case something fails here + no_$1=true + AC_ARG_WITH($1, [ --with-$1 directory containing $1 configuration ($1Config.sh)], with_$1config=${withval}) + AC_MSG_CHECKING([for $1 configuration]) + AC_CACHE_VAL(ac_cv_c_$1config,[ + + # First check to see if --with-$1 was specified. + if test x"${with_$1config}" != x ; then + case ${with_$1config} in + */$1Config.sh ) + if test -f ${with_$1config}; then + AC_MSG_WARN([--with-$1 argument should refer to directory containing $1Config.sh, not to $1Config.sh itself]) + with_$1config=`echo ${with_$1config} | sed 's!/$1Config\.sh$!!'` + fi;; + esac + if test -f "${with_$1config}/$1Config.sh" ; then + ac_cv_c_$1config=`(cd ${with_$1config}; pwd)` + else + AC_MSG_ERROR([${with_$1config} directory doesn't contain $1Config.sh]) + fi + fi + + # then check for a private $1 installation + if test x"${ac_cv_c_$1config}" = x ; then + for i in \ + ../$1 \ + `ls -dr ../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ + `ls -dr ../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ + `ls -dr ../$1*[[0-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ + ../../$1 \ + `ls -dr ../../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ + `ls -dr ../../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ + `ls -dr ../../$1*[[0-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ + ../../../$1 \ + `ls -dr ../../../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ + `ls -dr ../../../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ + `ls -dr ../../../$1*[[0-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ + ${srcdir}/../$1 \ + `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ + `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ + `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ + ; do + if test -f "$i/$1Config.sh" ; then + ac_cv_c_$1config=`(cd $i; pwd)` + break + fi + if test -f "$i/unix/$1Config.sh" ; then + ac_cv_c_$1config=`(cd $i/unix; pwd)` + break + fi + done + fi + + # check in a few common install locations + if test x"${ac_cv_c_$1config}" = x ; then + for i in `ls -d ${libdir} 2>/dev/null` \ + `ls -d ${exec_prefix}/lib 2>/dev/null` \ + `ls -d ${prefix}/lib 2>/dev/null` \ + `ls -d /usr/local/lib 2>/dev/null` \ + `ls -d /usr/contrib/lib 2>/dev/null` \ + `ls -d /usr/lib 2>/dev/null` \ + `ls -d /usr/lib64 2>/dev/null` \ + ; do + if test -f "$i/$1Config.sh" ; then + ac_cv_c_$1config=`(cd $i; pwd)` + break + fi + done + fi + ]) + + if test x"${ac_cv_c_$1config}" = x ; then + $1_BIN_DIR="# no $1 configs found" + AC_MSG_WARN([Cannot find $1 configuration definitions]) + exit 0 + else + no_$1= + $1_BIN_DIR=${ac_cv_c_$1config} + AC_MSG_RESULT([found $$1_BIN_DIR/$1Config.sh]) + fi + fi +]) + +#------------------------------------------------------------------------ +# TEA_LOAD_CONFIG -- +# +# Load the $1Config.sh file +# +# Arguments: +# +# Requires the following vars to be set: +# $1_BIN_DIR +# +# Results: +# +# Substitutes the following vars: +# $1_SRC_DIR +# $1_LIB_FILE +# $1_LIB_SPEC +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_LOAD_CONFIG], [ + AC_MSG_CHECKING([for existence of ${$1_BIN_DIR}/$1Config.sh]) + + if test -f "${$1_BIN_DIR}/$1Config.sh" ; then + AC_MSG_RESULT([loading]) + . "${$1_BIN_DIR}/$1Config.sh" + else + AC_MSG_RESULT([file not found]) + fi + + # + # If the $1_BIN_DIR is the build directory (not the install directory), + # then set the common variable name to the value of the build variables. + # For example, the variable $1_LIB_SPEC will be set to the value + # of $1_BUILD_LIB_SPEC. An extension should make use of $1_LIB_SPEC + # instead of $1_BUILD_LIB_SPEC since it will work with both an + # installed and uninstalled version of Tcl. + # + + if test -f "${$1_BIN_DIR}/Makefile" ; then + AC_MSG_WARN([Found Makefile - using build library specs for $1]) + $1_LIB_SPEC=${$1_BUILD_LIB_SPEC} + $1_STUB_LIB_SPEC=${$1_BUILD_STUB_LIB_SPEC} + $1_STUB_LIB_PATH=${$1_BUILD_STUB_LIB_PATH} + $1_INCLUDE_SPEC=${$1_BUILD_INCLUDE_SPEC} + $1_LIBRARY_PATH=${$1_LIBRARY_PATH} + fi + + AC_SUBST($1_VERSION) + AC_SUBST($1_BIN_DIR) + AC_SUBST($1_SRC_DIR) + + AC_SUBST($1_LIB_FILE) + AC_SUBST($1_LIB_SPEC) + + AC_SUBST($1_STUB_LIB_FILE) + AC_SUBST($1_STUB_LIB_SPEC) + AC_SUBST($1_STUB_LIB_PATH) + + # Allow the caller to prevent this auto-check by specifying any 2nd arg + AS_IF([test "x$2" = x], [ + # Check both upper and lower-case variants + # If a dev wanted non-stubs libs, this function could take an option + # to not use _STUB in the paths below + AS_IF([test "x${$1_STUB_LIB_SPEC}" = x], + [TEA_LOAD_CONFIG_LIB(translit($1,[a-z],[A-Z])_STUB)], + [TEA_LOAD_CONFIG_LIB($1_STUB)]) + ]) +]) + +#------------------------------------------------------------------------ +# TEA_LOAD_CONFIG_LIB -- +# +# Helper function to load correct library from another extension's +# ${PACKAGE}Config.sh. +# +# Results: +# Adds to LIBS the appropriate extension library +#------------------------------------------------------------------------ +AC_DEFUN([TEA_LOAD_CONFIG_LIB], [ + AC_MSG_CHECKING([For $1 library for LIBS]) + # This simplifies the use of stub libraries by automatically adding + # the stub lib to your path. Normally this would add to SHLIB_LD_LIBS, + # but this is called before CONFIG_CFLAGS. More importantly, this adds + # to PKG_LIBS, which becomes LIBS, and that is only used by SHLIB_LD. + if test "x${$1_LIB_SPEC}" != "x" ; then + if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes" ; then + TEA_ADD_LIBS([\"`${CYGPATH} ${$1_LIB_PATH}`\"]) + AC_MSG_RESULT([using $1_LIB_PATH ${$1_LIB_PATH}]) + else + TEA_ADD_LIBS([${$1_LIB_SPEC}]) + AC_MSG_RESULT([using $1_LIB_SPEC ${$1_LIB_SPEC}]) + fi + else + AC_MSG_RESULT([file not found]) + fi +]) + +#------------------------------------------------------------------------ +# TEA_EXPORT_CONFIG -- +# +# Define the data to insert into the ${PACKAGE}Config.sh file +# +# Arguments: +# +# Requires the following vars to be set: +# $1 +# +# Results: +# Substitutes the following vars: +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_EXPORT_CONFIG], [ + #-------------------------------------------------------------------- + # These are for $1Config.sh + #-------------------------------------------------------------------- + + # pkglibdir must be a fully qualified path and (not ${exec_prefix}/lib) + eval pkglibdir="[$]{libdir}/$1${PACKAGE_VERSION}" + if test "${TCL_LIB_VERSIONS_OK}" = "ok"; then + eval $1_LIB_FLAG="-l$1${PACKAGE_VERSION}${DBGX}" + eval $1_STUB_LIB_FLAG="-l$1stub${PACKAGE_VERSION}${DBGX}" + else + eval $1_LIB_FLAG="-l$1`echo ${PACKAGE_VERSION} | tr -d .`${DBGX}" + eval $1_STUB_LIB_FLAG="-l$1stub`echo ${PACKAGE_VERSION} | tr -d .`${DBGX}" + fi + $1_BUILD_LIB_SPEC="-L`pwd` ${$1_LIB_FLAG}" + $1_LIB_SPEC="-L${pkglibdir} ${$1_LIB_FLAG}" + $1_BUILD_STUB_LIB_SPEC="-L`pwd` [$]{$1_STUB_LIB_FLAG}" + $1_STUB_LIB_SPEC="-L${pkglibdir} [$]{$1_STUB_LIB_FLAG}" + $1_BUILD_STUB_LIB_PATH="`pwd`/[$]{PKG_STUB_LIB_FILE}" + $1_STUB_LIB_PATH="${pkglibdir}/[$]{PKG_STUB_LIB_FILE}" + + AC_SUBST($1_BUILD_LIB_SPEC) + AC_SUBST($1_LIB_SPEC) + AC_SUBST($1_BUILD_STUB_LIB_SPEC) + AC_SUBST($1_STUB_LIB_SPEC) + AC_SUBST($1_BUILD_STUB_LIB_PATH) + AC_SUBST($1_STUB_LIB_PATH) + + AC_SUBST(MAJOR_VERSION) + AC_SUBST(MINOR_VERSION) + AC_SUBST(PATCHLEVEL) +]) + + +#------------------------------------------------------------------------ +# TEA_PATH_CELIB -- +# +# Locate Keuchel's celib emulation layer for targeting Win/CE +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --with-celib=... +# +# Defines the following vars: +# CELIB_DIR Full path to the directory containing +# the include and platform lib files +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PATH_CELIB], [ + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-celib + + if test x"${no_celib}" = x ; then + # we reset no_celib in case something fails here + no_celib=true + AC_ARG_WITH(celib,[ --with-celib=DIR use Windows/CE support library from DIR], with_celibconfig=${withval}) + AC_MSG_CHECKING([for Windows/CE celib directory]) + AC_CACHE_VAL(ac_cv_c_celibconfig,[ + # First check to see if --with-celibconfig was specified. + if test x"${with_celibconfig}" != x ; then + if test -d "${with_celibconfig}/inc" ; then + ac_cv_c_celibconfig=`(cd ${with_celibconfig}; pwd)` + else + AC_MSG_ERROR([${with_celibconfig} directory doesn't contain inc directory]) + fi + fi + + # then check for a celib library + if test x"${ac_cv_c_celibconfig}" = x ; then + for i in \ + ../celib-palm-3.0 \ + ../celib \ + ../../celib-palm-3.0 \ + ../../celib \ + `ls -dr ../celib-*3.[[0-9]]* 2>/dev/null` \ + ${srcdir}/../celib-palm-3.0 \ + ${srcdir}/../celib \ + `ls -dr ${srcdir}/../celib-*3.[[0-9]]* 2>/dev/null` \ + ; do + if test -d "$i/inc" ; then + ac_cv_c_celibconfig=`(cd $i; pwd)` + break + fi + done + fi + ]) + if test x"${ac_cv_c_celibconfig}" = x ; then + AC_MSG_ERROR([Cannot find celib support library directory]) + else + no_celib= + CELIB_DIR=${ac_cv_c_celibconfig} + CELIB_DIR=`echo "$CELIB_DIR" | sed -e 's!\\\!/!g'` + AC_MSG_RESULT([found $CELIB_DIR]) + fi + fi +]) + + +# Local Variables: +# mode: autoconf +# End: diff --git a/win/Makefile.in b/win/Makefile.in new file mode 100644 index 0000000..9f543d0 --- /dev/null +++ b/win/Makefile.in @@ -0,0 +1,158 @@ +OS = @OS@ +ARCH = @ARCH@ +ROOT = @ROOT@ +EXEEXT = @EXEEXT@ +JOBS = @CORES@ + +CONFIGFLAGS =CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar +ASTFLAGS =CFLAGS=-DCMINPACK_NO_DLL +XPAFLAGS =CFLAGS=-DSTATIC_BUILD +TCLXMLFLAGS =--with-xml-static=yes +TARGET =--build=x86_64-unknown-mingw32 +WITHTCL =--with-tcl=$(ROOT)/tcl$(TCLVER)/win +WITHTK =--with-tk=$(ROOT)/tk$(TCLVER)/win $(WITHTCL) +CACHE =--config-cache --cache-file=../config.cache + +include ./make.include + +#--------------------------build + +.PHONY : saods9 tcl tk tkwin libxml2 libxslt zlib + +saods9 : dirs tcl tk \ + libxml2 libxslt zlib \ + tclxml xpa \ + tkblt tktable tkimg \ + tkmpeg tkhtml1 tkcon \ + tkwin \ + tksao ds9 +# posix- tclcheckdns tcliis tclsignal + +# no symbols +tcl : tcl$(TCLVER)/win/Makefile + @echo "" + @echo "*** Install tcl$(TCLVER) ***" + $(MAKE) -C tcl$(TCLVER)/win -j $(JOBS) + $(MAKE) -C tcl$(TCLVER)/win install + +tcl$(TCLVER)/win/Makefile : + @echo "" + @echo "*** Configure tcl$(TCLVER) ***" + cd tcl$(TCLVER)/win; \ + ./configure \ + --prefix $(ROOT) -exec-prefix $(ROOT) \ + --disable-shared \ + --config-cache --cache-file=../../config.cache + +tk : tk$(TCLVER)/win/Makefile + @echo "" + @echo "*** Install tk$(TCLVER) ***" + $(MAKE) -C tk$(TCLVER)/win -j $(JOBS) install + +tk$(TCLVER)/win/Makefile : + @echo "" + @echo "*** Configure tk$(TCLVER) ***" + cd tk$(TCLVER)/win; \ + ./configure \ + $(WITHTCL) \ + $(TKFLAGS) \ + --prefix $(ROOT) -exec-prefix $(ROOT) \ + --disable-shared --enable-symbols + +tkwin: tkwin/Makefile + @echo "" + @echo "*** Installing tkwin ***" + $(MAKE) -C tkwin install + +tkwin/Makefile : + @echo "" + @echo "*** Configure tkwin ***" + cd tkwin; \ + ./configure \ + $(WITHTK) \ + --prefix $(ROOT) --exec-prefix $(ROOT) \ + --disable-shared --enable-symbols \ + --config-cache --cache-file=../../config.cache + +libxml2 : libxml2/win32/config.mingw + @echo "" + @echo "*** Installing libxml2 ***" + $(MAKE) -C libxml2/win32 -j $(JOBS) -f Makefile.mingw dep + $(MAKE) -C libxml2/win32 -j $(JOBS) -f Makefile.mingw libxmla + $(MAKE) -C libxml2/win32 -j $(JOBS) -f Makefile.mingw install-libsa + cp libxml2/win32/xml2-config $(ROOT)/bin + +libxml2/win32/config.mingw : + @echo "" + @echo "*** Configure libxml2 ***" + cd libxml2/win32; \ + cscript configure.js trio=no threads=no ftp=yes http=yes html=yes c14n=yes catalog=yes docb=yes xpath=yes xptr=yes xinclude=yes iconv=no icu=no iso8859x=no zlib=no lzma=no xml_debug=yes mem_debug=yes run_debug=no regexps=yes modules=no tree=yes reader=yes writer=yes walker=yes pattern=yes push=yes valid=yes sax1=yes legacy=yes output=yes schemas=yes schematron=yes python=no compiler=mingw static=yes prefix="..\.." bindir="..\..\bin" incdir="..\..\include" libdir="..\..\lib" + +libxslt : libxslt/win32/config.mingw + @echo "" + @echo "*** Installing libxslt ***" + $(MAKE) -C libxslt/win32 -j $(JOBS) -f Makefile.mingw dep + $(MAKE) -C libxslt/win32 -j $(JOBS) -f Makefile.mingw libxslta + $(MAKE) -C libxslt/win32 -j $(JOBS) -f Makefile.mingw libexslta + $(MAKE) -C libxslt/win32 -j $(JOBS) -f Makefile.mingw install-libsa + cp libxslt/win32/xslt-config $(ROOT)/bin + +libxslt/win32/config.mingw : + @echo "" + @echo "*** Configure libxslt ***" + cd libxslt/win32; \ + cscript configure.js trio=no xslt_debug=yes mem_debug=no debugger=yes iconv=no zlib=no crypto=yes modules=no locale=yes compiler=mingw static=yes prefix="..\.." bindir="..\..\bin" incdir="..\..\include" libdir="..\..\lib" + +zlib : zlib/Makefile + @echo "" + @echo "*** Installing zlib ***" + $(MAKE) -C zlib -j $(JOBS) install + +zlib/Makefile : + @echo "" + @echo "*** Configure zlib ***" + cd zlib; \ + $(CONFIGFLAGS) CFLAGS=-DSTATIC_BUILD=1 ./configure \ + --prefix $(ROOT) --eprefix $(ROOT) \ + --static + +#--------------------------clean + +.PHONY : tkwinclean libxml2clean libxsltclean zlibclean + +tkwinclean : libxml2clean libxsltclean zlibclean + $(MAKE) -C tkwin clean + +libxml2clean : + $(MAKE) -C libxml2/win32 -f Makefile.mingw clean + +libxsltclean : + $(MAKE) -C libxslt/win32 -f Makefile.mingw clean + +zlibclean : + $(MAKE) -C zlib clean + +#--------------------------distclean + +.PHONY : tkwindistclean libxml2distclean libxsltdistclean zlibdistclean + +tkwindistclean : libxml2distclean libxsltdistclean zlibdistclean + $(MAKE) -C tkwin distclean + +libxml2distclean : + $(MAKE) -C libxml2/win32 -f Makefile.mingw distclean + +libxsltdistclean : + $(MAKE) -C libxslt/win32 -f Makefile.mingw distclean + +zlibdistclean : + $(MAKE) -C zlib distclean + rm -f zlib/Makefile + +#--------------------------distribution + +.PHONY : dist + +dist : all + cd bin; tar cvf - ds9$(EXEEXT) $(ZIPFILE) | gzip > dist/ds9.$(ARCH).$(DS9VERSION).tar.gz + diff --git a/win/aclocal.m4 b/win/aclocal.m4 new file mode 100755 index 0000000..0b05739 --- /dev/null +++ b/win/aclocal.m4 @@ -0,0 +1,9 @@ +# +# Include the TEA standard macro set +# + +builtin(include,tclconfig/tcl.m4) + +# +# Add here whatever m4 macros you want to define for your package +# diff --git a/win/configure b/win/configure new file mode 100755 index 0000000..9346f7c --- /dev/null +++ b/win/configure @@ -0,0 +1,3025 @@ +#! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.69 for saods9 7.5. +# +# +# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +# +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +# Use a proper internal environment variable to ensure we don't fall + # into an infinite loop, continuously re-executing ourselves. + if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then + _as_can_reexec=no; export _as_can_reexec; + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +as_fn_exit 255 + fi + # We don't want this to propagate to other subprocesses. + { _as_can_reexec=; unset _as_can_reexec;} +if test "x$CONFIG_SHELL" = x; then + as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi +" + as_required="as_fn_return () { (exit \$1); } +as_fn_success () { as_fn_return 0; } +as_fn_failure () { as_fn_return 1; } +as_fn_ret_success () { return 0; } +as_fn_ret_failure () { return 1; } + +exitcode=0 +as_fn_success || { exitcode=1; echo as_fn_success failed.; } +as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } +as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } +as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } +if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : + +else + exitcode=1; echo positional parameters were not saved. +fi +test x\$exitcode = x0 || exit 1 +test -x / || exit 1" + as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO + as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO + eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && + test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1" + if (eval "$as_required") 2>/dev/null; then : + as_have_required=yes +else + as_have_required=no +fi + if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : + +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_found=false +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + as_found=: + case $as_dir in #( + /*) + for as_base in sh bash ksh sh5; do + # Try only shells that exist, to save several forks. + as_shell=$as_dir/$as_base + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : + CONFIG_SHELL=$as_shell as_have_required=yes + if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : + break 2 +fi +fi + done;; + esac + as_found=false +done +$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : + CONFIG_SHELL=$SHELL as_have_required=yes +fi; } +IFS=$as_save_IFS + + + if test "x$CONFIG_SHELL" != x; then : + export CONFIG_SHELL + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +exit 255 +fi + + if test x$as_have_required = xno; then : + $as_echo "$0: This script requires a shell more modern than all" + $as_echo "$0: the shells that I found on your system." + if test x${ZSH_VERSION+set} = xset ; then + $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" + $as_echo "$0: be upgraded to zsh 4.3.4 or later." + else + $as_echo "$0: Please tell bug-autoconf@gnu.org about your system, +$0: including any error possibly output before this +$0: message. Then install a modern shell, or manually run +$0: the script under such a shell if you do have one." + fi + exit 1 +fi +fi +fi +SHELL=${CONFIG_SHELL-/bin/sh} +export SHELL +# Unset more variables known to interfere with behavior of common tools. +CLICOLOR_FORCE= GREP_OPTIONS= +unset CLICOLOR_FORCE GREP_OPTIONS + +## --------------------- ## +## M4sh Shell Functions. ## +## --------------------- ## +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + + + as_lineno_1=$LINENO as_lineno_1a=$LINENO + as_lineno_2=$LINENO as_lineno_2a=$LINENO + eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && + test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { + # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } + + # If we had to re-execute with $CONFIG_SHELL, we're ensured to have + # already done that, so ensure we don't try to do so again and fall + # in an infinite loop. This has already happened in practice. + _as_can_reexec=no; export _as_can_reexec + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +test -n "$DJDIR" || exec 7<&0 &1 + +# Name of the host. +# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_clean_files= +ac_config_libobj_dir=. +LIBOBJS= +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= + +# Identity of this package. +PACKAGE_NAME='saods9' +PACKAGE_TARNAME='saods9' +PACKAGE_VERSION='7.5' +PACKAGE_STRING='saods9 7.5' +PACKAGE_BUGREPORT='' +PACKAGE_URL='' + +ac_subst_vars='LTLIBOBJS +LIBOBJS +CORES +ROOT +ARCH +OS +PKG_CFLAGS +PKG_LIBS +PKG_INCLUDES +PKG_HEADERS +PKG_TCL_SOURCES +PKG_STUB_OBJECTS +PKG_STUB_SOURCES +PKG_STUB_LIB_FILE +PKG_LIB_FILE +EXEEXT +CYGPATH +target_alias +host_alias +build_alias +LIBS +ECHO_T +ECHO_N +ECHO_C +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_URL +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL' +ac_subst_files='' +ac_user_opts=' +enable_option_checking +with_arch +' + ac_precious_vars='build_alias +host_alias +target_alias' + + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +ac_unrecognized_opts= +ac_unrecognized_sep= +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datarootdir='${prefix}/share' +datadir='${datarootdir}' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +includedir='${prefix}/include' +oldincludedir='/usr/include' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' + +ac_prev= +ac_dashdash= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval $ac_prev=\$ac_option + ac_prev= + continue + fi + + case $ac_option in + *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *=) ac_optarg= ;; + *) ac_optarg=yes ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=\$ac_optarg ;; + + -without-* | --without-*) + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=no ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) as_fn_error $? "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information" + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + case $ac_envvar in #( + '' | [0-9]* | *[!_$as_cr_alnum]* ) + as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; + esac + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + as_fn_error $? "missing argument to $ac_option" +fi + +if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; + fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac +fi + +# Check all directory arguments for consistency. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir +do + eval ac_val=\$$ac_var + # Remove trailing slashes. + case $ac_val in + */ ) + ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` + eval $ac_var=\$ac_val;; + esac + # Be sure to have absolute directory names. + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac + as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + as_fn_error $? "working directory cannot be determined" +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + as_fn_error $? "pwd does not report name of working directory" + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$as_myself" || +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_myself" : 'X\(//\)[^/]' \| \ + X"$as_myself" : 'X\(//\)$' \| \ + X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_myself" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures saods9 7.5 to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking ...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root [DATAROOTDIR/doc/saods9] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] +_ACEOF + + cat <<\_ACEOF +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of saods9 7.5:";; + esac + cat <<\_ACEOF + +Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-arch build name + +Report bugs to the package provider. +_ACEOF +ac_status=$? +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +fi + +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +saods9 configure 7.5 +generated by GNU Autoconf 2.69 + +Copyright (C) 2012 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit +fi + +## ------------------------ ## +## Autoconf initialization. ## +## ------------------------ ## +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by saods9 $as_me 7.5, which was +generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + $as_echo "PATH: $as_dir" + done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; + 2) + as_fn_append ac_configure_args1 " '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + as_fn_append ac_configure_args " '$ac_arg'" + ;; + esac + done +done +{ ac_configure_args0=; unset ac_configure_args0;} +{ ac_configure_args1=; unset ac_configure_args1;} + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + $as_echo "## ---------------- ## +## Cache variables. ## +## ---------------- ##" + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + (set) 2>&1 | + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + sed -n \ + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( + *) + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) + echo + + $as_echo "## ----------------- ## +## Output variables. ## +## ----------------- ##" + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + $as_echo "## ------------------- ## +## File substitutions. ## +## ------------------- ##" + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi + + if test -s confdefs.h; then + $as_echo "## ----------- ## +## confdefs.h. ## +## ----------- ##" + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + $as_echo "$as_me: caught signal $ac_signal" + $as_echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -f -r conftest* confdefs.h + +$as_echo "/* confdefs.h */" > confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_URL "$PACKAGE_URL" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer an explicitly selected file to automatically selected ones. +ac_site_file1=NONE +ac_site_file2=NONE +if test -n "$CONFIG_SITE"; then + # We do not want a PATH search for config.site. + case $CONFIG_SITE in #(( + -*) ac_site_file1=./$CONFIG_SITE;; + */*) ac_site_file1=$CONFIG_SITE;; + *) ac_site_file1=./$CONFIG_SITE;; + esac +elif test "x$prefix" != xNONE; then + ac_site_file1=$prefix/share/config.site + ac_site_file2=$prefix/etc/config.site +else + ac_site_file1=$ac_default_prefix/share/config.site + ac_site_file2=$ac_default_prefix/etc/config.site +fi +for ac_site_file in "$ac_site_file1" "$ac_site_file2" +do + test "x$ac_site_file" = xNONE && continue + if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 +$as_echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" \ + || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "failed to load site script $ac_site_file +See \`config.log' for more details" "$LINENO" 5; } + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special files + # actually), so we avoid doing that. DJGPP emulates it as a regular file. + if test /dev/null != "$cache_file" && test -f "$cache_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 +$as_echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi +else + { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 +$as_echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 +$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 +$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 +$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) as_fn_append ac_configure_args " '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 +$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} + as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 +fi +## -------------------- ## +## Main body of script. ## +## -------------------- ## + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + +#-------------------------------------------------------------------- +# Call TEA_INIT as the first TEA_ macro to set up initial vars. +# This will define a ${TEA_PLATFORM} variable == "unix" or "windows" +# as well as PKG_LIB_FILE and PKG_STUB_LIB_FILE. +#-------------------------------------------------------------------- + + + # TEA extensions pass this us the version of TEA they think they + # are compatible with. + TEA_VERSION="3.9" + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for correct TEA configuration" >&5 +$as_echo_n "checking for correct TEA configuration... " >&6; } + if test x"${PACKAGE_NAME}" = x ; then + as_fn_error $? " +The PACKAGE_NAME variable must be defined by your TEA configure.in" "$LINENO" 5 + fi + if test x"3.9" = x ; then + as_fn_error $? " +TEA version not specified." "$LINENO" 5 + elif test "3.9" != "${TEA_VERSION}" ; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: warning: requested TEA version \"3.9\", have \"${TEA_VERSION}\"" >&5 +$as_echo "warning: requested TEA version \"3.9\", have \"${TEA_VERSION}\"" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok (TEA ${TEA_VERSION})" >&5 +$as_echo "ok (TEA ${TEA_VERSION})" >&6; } + fi + + # If the user did not set CFLAGS, set it now to keep macros + # like AC_PROG_CC and AC_TRY_COMPILE from adding "-g -O2". + if test "${CFLAGS+set}" != "set" ; then + CFLAGS="" + fi + + case "`uname -s`" in + *win32*|*WIN32*|*MINGW32_*) + # Extract the first word of "cygpath", so it can be a program name with args. +set dummy cygpath; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CYGPATH+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CYGPATH"; then + ac_cv_prog_CYGPATH="$CYGPATH" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CYGPATH="cygpath -w" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + test -z "$ac_cv_prog_CYGPATH" && ac_cv_prog_CYGPATH="echo" +fi +fi +CYGPATH=$ac_cv_prog_CYGPATH +if test -n "$CYGPATH"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CYGPATH" >&5 +$as_echo "$CYGPATH" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + EXEEXT=".exe" + TEA_PLATFORM="windows" + ;; + *CYGWIN_*) + CYGPATH=echo + EXEEXT=".exe" + # TEA_PLATFORM is determined later in LOAD_TCLCONFIG + ;; + *) + CYGPATH=echo + # Maybe we are cross-compiling.... + case ${host_alias} in + *mingw32*) + EXEEXT=".exe" + TEA_PLATFORM="windows" + ;; + *) + EXEEXT="" + TEA_PLATFORM="unix" + ;; + esac + ;; + esac + + # Check if exec_prefix is set. If not use fall back to prefix. + # Note when adjusted, so that TEA_PREFIX can correct for this. + # This is needed for recursive configures, since autoconf propagates + # $prefix, but not $exec_prefix (doh!). + if test x$exec_prefix = xNONE ; then + exec_prefix_default=yes + exec_prefix=$prefix + fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: configuring ${PACKAGE_NAME} ${PACKAGE_VERSION}" >&5 +$as_echo "$as_me: configuring ${PACKAGE_NAME} ${PACKAGE_VERSION}" >&6;} + + + + + # This package name must be replaced statically for AC_SUBST to work + + # Substitute STUB_LIB_FILE in case package creates a stub library too. + + + # We AC_SUBST these here to ensure they are subst'ed, + # in case the user doesn't call TEA_ADD_... + + + + + + + + + +ac_aux_dir= +for ac_dir in tclconfig "$srcdir"/tclconfig; do + if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + as_fn_error $? "cannot find install-sh, install.sh, or shtool in tclconfig \"$srcdir\"/tclconfig" "$LINENO" 5 +fi + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + + + +#-------------------------------------------------------------------- + + +# Check whether --with-arch was given. +if test "${with_arch+set}" = set; then : + withval=$with_arch; +else + with_arch=unknown +fi + + +OS="win" + + +ARCH=$with_arch + + +ROOT=$ac_pwd + + +CORES=`grep -c ^processor /proc/cpuinfo` + + +ac_config_files="$ac_config_files Makefile" + +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, we kill variables containing newlines. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes: double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \. + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) | + sed ' + /^ac_cv_env_/b end + t clear + :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + if test "x$cache_file" != "x/dev/null"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 +$as_echo "$as_me: updating cache $cache_file" >&6;} + if test ! -f "$cache_file" || test -h "$cache_file"; then + cat confcache >"$cache_file" + else + case $cache_file in #( + */* | ?:*) + mv -f confcache "$cache_file"$$ && + mv -f "$cache_file"$$ "$cache_file" ;; #( + *) + mv -f confcache "$cache_file" ;; + esac + fi + fi + else + { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 +$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +# Transform confdefs.h into DEFS. +# Protect against shell expansion while executing Makefile rules. +# Protect against Makefile macro expansion. +# +# If the first sed substitution is executed (which looks for macros that +# take arguments), then branch to the quote section. Otherwise, +# look for a macro that doesn't take arguments. +ac_script=' +:mline +/\\$/{ + N + s,\\\n,, + b mline +} +t clear +:clear +s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g +t quote +s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g +t quote +b any +:quote +s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g +s/\[/\\&/g +s/\]/\\&/g +s/\$/$$/g +H +:any +${ + g + s/^\n// + s/\n/ /g + p +} +' +DEFS=`sed -n "$ac_script" confdefs.h` + + +ac_libobjs= +ac_ltlibobjs= +U= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`$as_echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" + as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + + +: "${CONFIG_STATUS=./config.status}" +ac_write_fail=0 +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +as_write_fail=0 +cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false + +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +exec 6>&1 +## ----------------------------------- ## +## Main body of $CONFIG_STATUS script. ## +## ----------------------------------- ## +_ASEOF +test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# Save the log message, to keep $0 and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by saods9 $as_me 7.5, which was +generated by GNU Autoconf 2.69. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + +_ACEOF + +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac + + + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# Files that config.status was made for. +config_files="$ac_config_files" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +ac_cs_usage="\ +\`$as_me' instantiates files and other configuration actions +from templates according to the current configuration. Unless the files +and actions are specified as TAGs, all are instantiated by default. + +Usage: $0 [OPTION]... [TAG]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + --config print configuration, then exit + -q, --quiet, --silent + do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + +Configuration files: +$config_files + +Report bugs to the package provider." + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" +ac_cs_version="\\ +saods9 config.status 7.5 +configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" + +Copyright (C) 2012 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +test -n "\$AWK" || AWK=awk +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# The default lists apply if the user does not specify any file. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=?*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + --*=) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg= + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac + + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + $as_echo "$ac_cs_version"; exit ;; + --config | --confi | --conf | --con | --co | --c ) + $as_echo "$ac_cs_config"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + '') as_fn_error $? "missing file argument" ;; + esac + as_fn_append CONFIG_FILES " '$ac_optarg'" + ac_need_defaults=false;; + --he | --h | --help | --hel | -h ) + $as_echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) as_fn_error $? "unrecognized option: \`$1' +Try \`$0 --help' for more information." ;; + + *) as_fn_append ac_config_targets " $1" + ac_need_defaults=false ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +if \$ac_cs_recheck; then + set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + shift + \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 + CONFIG_SHELL='$SHELL' + export CONFIG_SHELL + exec "\$@" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + $as_echo "$ac_log" +} >&5 + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + + *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; + esac +done + + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. +$debug || +{ + tmp= ac_tmp= + trap 'exit_status=$? + : "${ac_tmp:=$tmp}" + { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status +' 0 + trap 'as_fn_exit 1' 1 2 13 15 +} +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 +ac_tmp=$tmp + +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. +if test -n "$CONFIG_FILES"; then + + +ac_cr=`echo X | tr X '\015'` +# On cygwin, bash can eat \r inside `` if the user requested igncr. +# But we know of no other shell where ac_cr would be empty at this +# point, so we can use a bashism as a fallback. +if test "x$ac_cr" = x; then + eval ac_cr=\$\'\\r\' +fi +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' +else + ac_cs_awk_cr=$ac_cr +fi + +echo 'BEGIN {' >"$ac_tmp/subs1.awk" && +_ACEOF + + +{ + echo "cat >conf$$subs.awk <<_ACEOF" && + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" +} >conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 +ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + . ./conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done +rm -f conf$$subs.sh + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && +_ACEOF +sed -n ' +h +s/^/S["/; s/!.*/"]=/ +p +g +s/^[^!]*!// +:repl +t repl +s/'"$ac_delim"'$// +t delim +:nl +h +s/\(.\{148\}\)..*/\1/ +t more1 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +p +n +b repl +:more1 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t nl +:delim +h +s/\(.\{148\}\)..*/\1/ +t more2 +s/["\\]/\\&/g; s/^/"/; s/$/"/ +p +b +:more2 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t delim +' >$CONFIG_STATUS || ac_write_fail=1 +rm -f conf$$subs.awk +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACAWK +cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" + +} +{ + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } + + print line +} + +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +else + cat +fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ + || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 +_ACEOF + +# VPATH may cause trouble with some makes, so we remove sole $(srcdir), +# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ +h +s/// +s/^/:/ +s/[ ]*$/:/ +s/:\$(srcdir):/:/g +s/:\${srcdir}:/:/g +s/:@srcdir@:/:/g +s/^:*// +s/:*$// +x +s/\(=[ ]*\).*/\1/ +G +s/\n// +s/^[^=]*=[ ]*$// +}' +fi + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +fi # test -n "$CONFIG_FILES" + + +eval set X " :F $CONFIG_FILES " +shift +for ac_tag +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$ac_tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + as_fn_append ac_file_inputs " '$ac_f'" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} + fi + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac + + case $ac_tag in + *:-:* | *:-) cat >"$ac_tmp/stdin" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; + esac + ;; + esac + + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir="$ac_dir"; as_fn_mkdir_p + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + + case $ac_mode in + :F) + # + # CONFIG_FILE + # + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= +ac_sed_dataroot=' +/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac +_ACEOF + +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_sed_extra="$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s|@configure_input@|$ac_sed_conf_input|;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +$ac_datarootdir_hack +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ + >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ + "$ac_tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&5 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&2;} + + rm -f "$ac_tmp/stdin" + case $ac_file in + -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; + *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; + esac \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + ;; + + + + esac + +done # for ac_tag + + +as_fn_exit 0 +_ACEOF +ac_clean_files=$ac_clean_files_save + +test $ac_write_fail = 0 || + as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || as_fn_exit 1 +fi +if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 +$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} +fi + + diff --git a/win/configure.in b/win/configure.in new file mode 100755 index 0000000..d36d730 --- /dev/null +++ b/win/configure.in @@ -0,0 +1,51 @@ +#!/bin/bash -norc +dnl This file is an input file used by the GNU "autoconf" program to +dnl generate the file "configure", which is run during Tcl installation +dnl to configure the system for the local environment. + +#----------------------------------------------------------------------- +# Sample configure.in for Tcl Extensions. The only places you should +# need to modify this file are marked by the string __CHANGE__ +#----------------------------------------------------------------------- + +#----------------------------------------------------------------------- +# __CHANGE__ +# Set your package name and version numbers here. +# +# This initializes the environment with PACKAGE_NAME and PACKAGE_VERSION +# set as provided. These will also be added as -D defs in your Makefile +# so you can encode the package version directly into the source files. +# This will also define a special symbol for Windows (BUILD_ +# so that we create the export library with the dll. +#----------------------------------------------------------------------- + +AC_INIT([saods9], [7.5]) + +#-------------------------------------------------------------------- +# Call TEA_INIT as the first TEA_ macro to set up initial vars. +# This will define a ${TEA_PLATFORM} variable == "unix" or "windows" +# as well as PKG_LIB_FILE and PKG_STUB_LIB_FILE. +#-------------------------------------------------------------------- + +TEA_INIT([3.9]) + +AC_CONFIG_AUX_DIR(tclconfig) + +#-------------------------------------------------------------------- + +AC_ARG_WITH([arch],AC_HELP_STRING([--with-arch],[build name]),[],[with_arch=unknown]) + +OS="win" +AC_SUBST(OS) + +ARCH=$with_arch +AC_SUBST(ARCH) + +ROOT=$ac_pwd +AC_SUBST(ROOT) + +CORES=`grep -c ^processor /proc/cpuinfo` +AC_SUBST(CORES) + +AC_OUTPUT([Makefile]) + diff --git a/win/tclconfig/CVS/Entries b/win/tclconfig/CVS/Entries new file mode 100644 index 0000000..a3b9b21 --- /dev/null +++ b/win/tclconfig/CVS/Entries @@ -0,0 +1,5 @@ +/ChangeLog/1.1/Wed Aug 12 18:31:54 2015// +/README.txt/1.1/Wed Aug 12 18:31:54 2015// +/install-sh/1.1/Wed Aug 12 18:31:54 2015// +/tcl.m4/1.1/Wed Aug 12 18:31:54 2015// +D diff --git a/win/tclconfig/CVS/Repository b/win/tclconfig/CVS/Repository new file mode 100644 index 0000000..31f5a73 --- /dev/null +++ b/win/tclconfig/CVS/Repository @@ -0,0 +1 @@ +saods9/win/tclconfig diff --git a/win/tclconfig/CVS/Root b/win/tclconfig/CVS/Root new file mode 100644 index 0000000..fea38f8 --- /dev/null +++ b/win/tclconfig/CVS/Root @@ -0,0 +1 @@ +:ext:joye@bokhara:/proj/rd/cvsroot diff --git a/win/tclconfig/ChangeLog b/win/tclconfig/ChangeLog new file mode 100644 index 0000000..ffda2bb --- /dev/null +++ b/win/tclconfig/ChangeLog @@ -0,0 +1,980 @@ +2013-07-04 Jan Nijtmans + + * unix/tcl.m4: Bug [3324676]: AC_PROG_INSTALL incompat, + Bug [3606445]: Unneeded -DHAVE_NO_SEH=1 when not building on Windows + +2013-07-02 Jan Nijtmans + + * unix/tcl.m4: Bug [32afa6e256]: dirent64 check is incorrect in tcl.m4 + (thanks to Brian Griffin) + +2013-06-20 Jan Nijtmans + + * unix/tcl.m4: Use X11/Xlib.h for checking where X11 can be found + in stead of X11/XIntrinsic.h. Suggested by Pietro Cerutti. + +2013-06-04 Jan Nijtmans + + * unix/tcl.m4: Eliminate NO_VIZ macro as current + zlib uses HAVE_HIDDEN in stead. One more last-moment + fix for FreeBSD by Pietro Cerutti + +2013-05-19 Jan Nijtmans + + * unix/tcl.m4: Fix for FreeBSD, and remove support for old + FreeBSD versions. Patch by Pietro Cerutti + +2013-03-12 Jan Nijtmans + + * unix/tcl.m4: Patch by Andrew Shadura, providing better support for + * three architectures they have in Debian. + +2012-08-07 Stuart Cassoff + + * tcl.m4: Added "-DNDEBUG" to CFLAGS_DEFAULT + when building with --disable-symbols. + +2012-08-07 Stuart Cassoff + + * tcl.m4: [Bug 3555058]: Checkin [30736d63f0] broke + CFLAGS_DEFAULT, LDFLAGS_DEFAULT + +2012-08-07 Stuart Cassoff + + * tcl.m4: [Bug 3511806]: Checkin [30736d63f0] broke CFLAGS + +2012-08-07 Jan Nijtmans + + * tcl.m4: [Bug 3511806]: Checkin [30736d63f0] broke CFLAGS + +2012-07-25 Jan Nijtmans + + * tcl.m4: My previous commit (2012-04-03) broke the ActiveTcl + build for AMD64, because of the quotes in "C://AMD64/cl.exe". + It turns out that the AC_TRY_COMPILE macro cannot handle that. + +2012-07-22 Stuart Cassoff + + * tcl.m4: Tidy: consistency, spelling, phrasing, whitespace. + No functional change. + +2012-04-03 Jan Nijtmans + + * tcl.m4: [Bug 3511806] Compiler checks too early + This change allows to build the cygwin and mingw32 ports of + Tcl/Tk extensions to build out-of-the-box using a native or + cross-compiler, e.g. on Cygwin, Linux or Darwin. + +2011-04-02 Jan Nijtmans + + * install-sh: Fix issue with library stripping in install-sh + (backported from kevin_walzer's patch from Tcl 8.6 trunk) + +2011-04-05 Andreas Kupries + + * tcl.m4: Applied patch by Jeff Lawson. Nicer error message when + tclConfig.sh was not found. + +2010-12-15 Stuart Cassoff + + * install-sh: Upgrade to newer install-sh and use it. + * tcl.m4: + +2010-12-14 Stuart Cassoff + + * tcl.m4: Better building on OpenBSD. + +2010-12-14 Jan Nijtmans + + * tcl.m4: when using gcc, don't try to determine Win64 SDK + +2010-12-12 Jan Nijtmans + + * tcl.m4: Determine correctly a cross-compiler-windres + +2010-11-23 Jan Nijtmans + + * tcl.m4: add some cross-compile support, borrowed from Tcl 8.6 + +2010-09-16 Jeff Hobbs + + * tcl.m4: correct HP-UX LDFLAGS (only used when building big shell) + +2010-09-14 Jeff Hobbs + + * tcl.m4: add extra if check for .manifest file generation + Add notice about package name and version being built. + +2010-09-09 Jan Nijtmans + + * tcl.m4: [FREQ #3058486] TEA_LOAD_CONFIG doesn't set all BUILD_ vars + Slightly related: defining BUILD_$1 on all platforms - not only win - + allows the -fvisibility feature to be used in extensions as well, at + least if you compile against tcl >= 8.5. + +2010-08-26 Jeff Hobbs + + * tcl.m4: ensure safe quoting for autoheader usage + +2010-08-19 Jeff Hobbs + + * tcl.m4: add TEA_ADD_CLEANFILES macro to make adding cleanfiles + easier, and add *.exp to CLEANFILES Windows default. + (TEA_MAKE_LIB): Enhanced to check for MSVC that requires manifests + and auto-embed it into proj DLL via MAKE_SHARED_LIB. Also define + VC_MANIFEST_EMBED_DLL and VC_MANIFEST_EMBED_EXE that do the same + magic in case it is needed for extended TEA projects. + +2010-08-16 Jeff Hobbs + + *** Bump to TEA_VERSION 3.9 *** + If upgrading from TEA_VERSION 3.8, copy over tcl.m4, change + TEA_INIT to use 3.9 and reconfigure (ac-2.59+). + BUILD_${PACKAGE_NAME} will be auto-defined on Windows for + correct setting of TCL_STORAGE_CLASS. + TEA_LOAD_CONFIG users should remove the SHLIB_LD_LIBS setting done + in configure.in (LIBS will be automagically populated by + TEA_LOAD_CONFIG). + TEA_EXPORT_CONFIG has been added for ${pkg}Config.sh creators + SHLIB_LD_FLAGS was deprecated a while ago, remove it if it is + still in your Makefile.in. + + * tcl.m4: add /usr/lib64 to set of auto-search dirs. [Bug 1230554] + Auto-define BUILD_$PACKAGE_NAME so users don't need to. This + needs to correspond with $pkg.h define magic for TCL_STORAGE_CLASS. + Auto-define CLEANFILES. Users can expand it. + (SHLIB_LD_LIBS): define to '${LIBS}' default and change it only if + necessary. Platforms not using this may simply not work or have + very funky linkers. + (TEA_LOAD_CONFIG): When loading config for another extension, + auto-add stub libraries found with TEA_ADD_LIBS. Eases + configure.in for modules like itk and img::*. + (TEA_EXPORT_CONFIG): Add standardized function for exporting a + ${pkg}Config.sh. See use by img::* and itcl. + +2010-08-12 Jeff Hobbs + + *** Bump to TEA_VERSION 3.8 *** + If upgrading from TEA_VERSION 3.7, copy over tcl.m4, change + TEA_INIT to use 3.8 and reconfigure (ac-2.59+). + No other changes should be necessary. + + * tcl.m4: remove more vestigial bits from removed platforms. + Add back SCO_SV-3.2*. + Remove use of DL_LIBS and DL_OBJS and related baggage - these are + only needed by the core to support 'load'. + Allow for macosx in TEA_ADD_SOURCES. + Correct check for found_xincludes=no in TEA_PATH_UNIX_X. + +2010-08-11 Jeff Hobbs + + * tcl.m4: remove the following old platform configurations: + UNIX_SV*|UnixWare-5*, SunOS-4.*, SINIX*5.4*, SCO_SV-3.2*, + OSF1-1.*, NEXTSTEP-*, NetBSD-1.*|FreeBSD-[[1-2]].*, MP-RAS-*, + IRIX-5.*, HP-UX-*.08.*|HP-UX-*.09.*|HP-UX-*.10.*, dgux*, + BSD/OS-2.1*|BSD/OS-3* + (AIX): drop AIX-pre4 support and use of ldAix, use -bexpall/-brtl + +2010-07-05 Jan Nijtmans + + * tcl.m4: [Patch #1055668] removal of exported internals from + tclInt.h (EXTERN macro) + +2010-04-14 Jan Nijtmans + + * tcl.m4 - Backport a lot of quoting fixes from tcl8.6/unix/tcl.m4 + - Fix determination of CYGPATH for CYGWIN + With those fixes, itcl and tdbc compile fine with CYGWIN + +2010-04-06 Jan Nijtmans + + * install-sh [Bug 2982540] configure and install* script files + should always have LF + +2010-02-19 Stuart Cassoff + + * tcl.m4: Correct compiler/linker flags for threaded builds on + OpenBSD. + +2010-01-19 Jan Nijtmans + + * tcl.m4: Detect CYGWIN variant: win32 or unix + +2010-01-03 Donal K. Fellows + + * unix/tcl.m4 (TEA_CONFIG_CFLAGS): [Tcl Bug 1636685]: Use the + configuration for modern FreeBSD suggested by the FreeBSD porter. + +2009-10-22 Jan Nijtmans + + * tcl.m4: [Tcl Patch #2883533] tcl.m4 support for Haiku OS + +2009-04-27 Jeff Hobbs + + * tcl.m4 (TEA_CONFIG_CFLAGS): harden the check to add _r to CC on + AIX with threads. + +2009-04-10 Daniel Steffen + + * tcl.m4 (Darwin): check for 64-bit TkAqua. + +2009-03-26 Jan Nijtmans + + * tclconfig/tcl.m4: Adapt LDFLAGS and LD_SEARCH_FLAGS + together with SHLIB_LD definition to unbreak building on HPUX. + +2009-03-20 Andreas Kupries + + * tclconfig/tcl.m4: Changed SHLIB_LD definition to unbreak + building on HPUX. + +2009-03-16 Joe English + + * tcl.m4(TEA_PUBLIC_TK_HEADERS): Look at ${TK_INCLUDE_SPEC} + (found in tkConfig.sh) when trying to guess where tk.h might be + [Patch 1960628]. + +2009-03-11 Joe English + + * tcl.m4: Allow ${SHLIB_SUFFIX} to be overridden at + configure-time [Patch 1960628]. Also fix some comment typos, + and an uninitialized variable bug-waiting-to-happen. + +2008-12-21 Jan Nijtmans + + * tcl.m4: [Bug 2073255] Tcl_GetString(NULL) doesn't crash on HP-UX + (this bug report was for Tcl, but holds for TEA as well.) + +2008-12-20 Daniel Steffen + + * tcl.m4: sync with tdbc tcl.m4 changes + (SunOS-5.11): Sun cc SHLIB_LD: use LDFLAGS_DEFAULT instead of LDFLAGS + +2008-12-02 Jeff Hobbs + + *** Bump to TEA_VERSION 3.7 *** + + * tcl.m4: in private header check, check for Port.h instead + of Int.h to ensure all private headers are available. + +2008-11-04 Daniel Steffen + + * tcl.m4 (Darwin): sync TEA_PRIVATE_TK_HEADERS handling of + Tk.framework PrivateHeaders with TEA_PRIVATE_TCL_HEADERS. + +2008-11-04 Jeff Hobbs + + * tcl.m4 (TEA_PATH_TCLCONFIG, TEA_PATH_TKCONFIG): exit with error + when tclConfig.sh cannot be found. [Bug #1997760] + (TEA_PRIVATE_TCL_HEADERS, TEA_PRIVATE_TK_HEADERS): allow for + finding the headers installed in the public areas, e.g. a result of + make install-private-headers. [Bug #1631922] + +2008-08-12 Daniel Steffen + + * tcl.m4 (Darwin): link shlib with current and compatiblity version + flags; look for libX11.dylib when searching for X11 libraries. + +2008-06-12 Daniel Steffen + + * tcl.m4 (SunOS-5.11): fix 64bit amd64 support with gcc & Sun cc. + +2008-03-27 Daniel Steffen + + * tcl.m4 (SunOS-5.1x): fix 64bit support for Sun cc. [Bug 1921166] + +2008-02-01 Donal K. Fellows + + * tcl.m4 (TEA_CONFIG_CFLAGS): Updated to work at least in part with + more modern VC versions. Currently just made the linker flags more + flexible; more work may be needed. + +2007-10-26 Daniel Steffen + + * tcl.m4 (Darwin): add support for 64-bit X11. + +2007-10-23 Jeff Hobbs + + *** Tagged tea-3-branch to start TEA 4 development on HEAD *** + +2007-09-17 Joe English + + * tcl.m4: use '${CC} -shared' instead of 'ld -Bshareable' + to build shared libraries on current NetBSDs [Bug 1749251]. + +2007-09-15 Daniel Steffen + + * tcl.m4: replace all direct references to compiler by ${CC} to + enable CC overriding at configure & make time. + (SunOS-5.1x): replace direct use of '/usr/ccs/bin/ld' in SHLIB_LD by + 'cc' compiler driver. + +2007-08-08 Jeff Hobbs + + * tcl.m4: check Ttk dir for Tk private headers (8.5). + Add some comments to other bits. + +2007-06-25 Jeff Hobbs + + * tcl.m4 (TEA_PROG_TCLSH, TEA_PROG_WISH): move where / is added. + +2007-06-13 Jeff Hobbs + + * tcl.m4: fix --with-tkinclude alignment. [Bug 1506111] + +2007-06-06 Daniel Steffen + + * tcl.m4 (Darwin): fix 64bit arch removal in fat 32&64bit builds. + +2007-05-18 Donal K. Fellows + + * tcl.m4: Added quoting so that paths with spaces cause fewer + problems. + +2007-03-07 Daniel Steffen + + * tcl.m4 (Darwin): s/CFLAGS/CPPFLAGS/ in -mmacosx-version-min check. + +2007-02-15 Jeff Hobbs + + * tcl.m4: correct private header check to search in generic subdir + +2007-02-09 Jeff Hobbs + + *** Bump to TEA_VERSION 3.6 *** + + * tcl.m4: correct -d to -f + (TEA_CONFIG_CFLAGS): SHLIB_SUFFIX is .so on HP ia64 [Bug 1615058] + +2007-02-08 Jeff Hobbs + + * tcl.m4 (TEA_PRIVATE_TCL_HEADERS, TEA_PRIVATE_TK_HEADERS): check + that the dirs actually have private headers. [Bug 1631922] + +2007-02-04 Daniel Steffen + + * tcl.m4: add caching to -pipe check. + +2007-01-25 Daniel Steffen + + * tcl.m4: integrate CPPFLAGS into CFLAGS as late as possible and + move (rather than duplicate) -isysroot flags from CFLAGS to CPPFLAGS to + avoid errors about multiple -isysroot flags from some older gcc builds. + +2006-01-19 Daniel Steffen + + * tcl.m4: ensure CPPFLAGS env var is used when set. [Bug 1586861] + (Darwin): add -isysroot and -mmacosx-version-min flags to CPPFLAGS when + present in CFLAGS to avoid discrepancies between what headers configure + sees during preprocessing tests and compiling tests. + +2006-12-19 Daniel Steffen + + * tcl.m4 (Darwin): --enable-64bit: verify linking with 64bit -arch flag + succeeds before enabling 64bit build. + +2006-12-16 Daniel Steffen + + * tcl.m4 (Linux): fix previous change to use makefile variable + LDFLAGS_DEFAULT instead of LDFLAGS in SHLIB_LD, to ensure linker + flags in sampleextension Makefile are picked up. + +2006-11-26 Daniel Steffen + + * tcl.m4 (Linux): --enable-64bit support. [Patch 1597389], [Bug 1230558] + +2006-08-18 Daniel Steffen + + * tcl.m4 (Darwin): add support for --enable-64bit on x86_64, for + universal builds including x86_64 and for use of -mmacosx-version-min + instead of MACOSX_DEPLOYMENT_TARGET. For Tk extensions, remove 64-bit + arch flags from CFLAGS like in the Tk configure, as neither TkAqua nor + TkX11 can be built for 64-bit at present. + +2006-03-28 Jeff Hobbs + + * tcl.m4: []-quote AC_DEFUN functions. + (TEA_PATH_TKCONFIG): Fixed Windows-specific check for tkConfig.sh. + (TEA_MAKE_LIB): Prepend 'lib' for Windows-gcc configs. + +2006-03-07 Joe English + + * tcl.m4: Set SHLIB_LD_FLAGS='${LIBS}' on NetBSD, + as per the other *BSD variants [Bug 1334613]. + +2006-01-25 Jeff Hobbs + + *** Bump to TEA version 3.5 *** + + * tcl.m4: keep LD_SEARCH_FLAGS and CC_SEARCH_FLAGS synchronous + with core tcl.m4 meaning. + +2006-01-24 Daniel Steffen + + * tcl.m4 (Darwin): use makefile variable LDFLAGS_DEFAULT instead of + LDFLAGS in SHLIB_LD, to ensure linker flags in sampleextension Makefile + are picked up. [Bug 1403343] + +2006-01-23 Jeff Hobbs + + * tcl.m4: add C:/Tcl/lib and C:/Progra~1/Tcl/lib dirs to check for + *Config.sh on Windows. [Bug 1407544] + +2006-01-23 Daniel Steffen + + * tcl.m4 (Darwin): for Tk extensions, remove -arch ppc64 from CFLAGS + like in the Tk configure, as neither TkAqua nor TkX11 can be built for + 64bit at present (no 64bit GUI libraries). + +2006-01-22 Jeff Hobbs + + * tcl.m4: restore system=windows on Windows. + Remove error if 'ar' isn't found (it may not be on Windows). + Do not add -lxnet or define _XOPEN_SOURCE on HP-UX by default. + Ensure the C|LDFLAGS_DEFAULT gets the fully sub'd value at + configure time. + +2006-01-10 Daniel Steffen + + * tcl.m4: add caching, use AC_CACHE_CHECK instead of AC_CACHE_VAL + where possible, consistent message quoting, sync relevant + tcl/unix/tcl.m4 HEAD changes and gratuitous formatting differences + (notably sunc removal of support for for ancient BSD's, IRIX 4, + RISCos and Ultrix by kennykb), Darwin improvements to + TEA_LOAD_*CONFIG to make linking work against Tcl/Tk frameworks + installed in arbitrary location, change TEA_PROG_* search order + (look in *_BIN_DIR parents before *_PREFIX). + +2006-01-05 Jeff Hobbs + + * tcl.m4: add dkf's system config refactor + +2006-01-04 Jeff Hobbs + + * tcl.m4: remove extraneous ' that causes bash 3.1 to choke + +2005-12-19 Joe English + + * tcl.m4 (TEA_PATH_TCLCONFIG &c): Look for tclConfig.sh &c + in ${libdir}, where they are installed by default [Patch #1377407]. + +2005-12-05 Don Porter + + * tcl.m4 (TEA_PUBLIC_*_HEADERS): Better support for finding + header files for uninstalled Tcl and Tk. + +2005-12-02 Jeff Hobbs + + * tcl.m4: correctly bump TEA_VERSION var to 3.4 + +2005-12-01 Daniel Steffen + + * unix/tcl.m4 (Darwin): fixed error when MACOSX_DEPLOYMENT_TARGET unset + +2005-11-29 Jeff Hobbs + + * tcl.m4: *** Bump to TEA version 3.4 *** + Add Windows x64 build support. + Remove TEA_PATH_NOSPACE and handle the problem with ""s where + necessary - the macro relied on TCLSH_PROG which didn't work for + cross-compiles. + +2005-11-27 Daniel Steffen + + * tcl.m4 (Darwin): add 64bit support, add CFLAGS to SHLIB_LD to + support passing -isysroot in env(CFLAGS) to configure (flag can't + be present twice, so can't be in both CFLAGS and LDFLAGS during + configure), don't use -prebind when deploying on 10.4. + (TEA_ENABLE_LANGINFO, TEA_TIME_HANDLER): add/fix caching. + +2005-10-30 Daniel Steffen + + * tcl.m4: fixed two tests for TEA_WINDOWINGSYSTEM = "aqua" that + should have been for `uname -s` = "Darwin" instead; added some + missing quoting. + (TEA_PROG_TCLSH, TEA_PROG_WISH): fix incorrect assumption that + install location of tclConfig.sh/tkConfig.sh allows to determine + the tclsh/wish install dir via ../bin. Indeed tcl/tk can be + configured with arbitrary --libdir and --bindir (independent of + prefix) and such a configuration is in fact standard with Darwin + framework builds. At least now also check ${TCL_PREFIX}/bin + resp. ${TK_PREFIX}/bin for presence of tclsh resp. wish (if tcl/tk + have been configured with arbitrary --bindir, this will still not + find them, for a general solution *Config.sh would need to contain + the values of bindir/libdir/includedir passed to configure). + +2005-10-07 Jeff Hobbs + + * tcl.m4: Fix Solaris 5.10 check and Solaris AMD64 64-bit builds. + +2005-10-04 Jeff Hobbs + + * tcl.m4 (TEA_PRIVATE_TCL_HEADERS): add / to finish sed macro + (TEA_ENABLE_THREADS): don't check for pthread_attr_setstacksize func + +2005-09-13 Jeff Hobbs + + * tcl.m4: *** Update to TEA version 3.3 *** + define TEA_WINDOWINGSYSTEM in TEA_LOAD_TKCONFIG. + Make --enable-threads the default (users can --disable-threads). + Improve AIX ${CC}_r fix to better check existing ${CC} value. + Do the appropriate evals to not require the *TOP_DIR_NATIVE vars + be set for extensions that use private headers. + Make aqua check for Xlib compat headers the same as win32. + +2005-07-26 Mo DeJong + + * tcl.m4 (TEA_PROG_TCLSH, TEA_BUILD_TCLSH, + TEA_PROG_WISH, TEA_BUILD_WISH): Remove + TEA_BUILD_TCLSH and TEA_BUILD_WISH because + of complaints that it broke the build when + only an installed version of Tcl was available + at extension build time. The TEA_PROG_TCLSH and + TEA_PROG_WISH macros will no longer search the + path at all. The build tclsh or installed + tclsh shell will now be found by TEA_PROG_TCLSH. + +2005-07-24 Mo DeJong + + * tcl.m4 (TEA_PROG_TCLSH, TEA_BUILD_TCLSH, + TEA_PROG_WISH, TEA_BUILD_WISH): + Split confused search for tclsh on PATH and + build and install locations into two macros. + TEA_PROG_TCLSH and TEA_PROG_WISH search the + system PATH for an installed tclsh or wish. + The TEA_BUILD_TCLSH and TEA_BUILD_WISH + macros determine the name of tclsh or + wish in the Tcl or Tk build directory even + if tclsh or wish has not yet been built. + [Tcl bug 1160114] + [Tcl patch 1244153] + +2005-06-23 Daniel Steffen + + * tcl.m4 (TEA_PRIVATE_TK_HEADERS): add ${TK_SRC_DIR}/macosx to + TK_INCLUDES when building against TkAqua. + + * tcl.m4 (TEA_PATH_X): fixed missing comma in AC_DEFINE + + * tcl.m4: changes to better support framework builds of Tcl and Tk out + of the box: search framework install locations for *Config.sh, and if in + presence of a framework build, use the framework's Headers and + PrivateHeaders directories for public and private includes. [FR 947735] + +2005-06-18 Daniel Steffen + + * tcl.m4 (Darwin): add -headerpad_max_install_names to LDFLAGS to + ensure we can always relocate binaries with install_name_tool. + +2005-06-04 Daniel Steffen + + * tcl.m4 (TEA_PATH_X): for TEA_WINDOWINGSYSTEM == aqua, check if xlib + compat headers are available in tkheaders location, otherwise add xlib + sourcedir to TK_XINCLUDES. + +2005-04-25 Daniel Steffen + + * tcl.m4: added AC_DEFINE* descriptions (from core tcl.m4) to allow + use with autoheader. + (Darwin): added configure checks for recently added linker flags + -single_module and -search_paths_first to allow building with older + tools (and on Mac OS X 10.1), use -single_module in SHLIB_LD. + (TEA_MISSING_POSIX_HEADERS): added caching of dirent.h check. + (TEA_BUGGY_STRTOD): added caching (sync with core tcl.m4). + +2005-03-24 Jeff Hobbs + + * tcl.m4 (TEA_TCL_64BIT_FLAGS): use Tcl header defaults for wide + int type only on Windows when __int64 is detected as valid. + +2005-03-24 Don Porter + + * README.txt: Update reference to "SC_* macros" to "TEA_* macros". + * tcl.m4: Incorporated recent improvements in SC_PATH_TCLCONFIG + and SC_PATH_TKCONFIG into TEA_PATH_TCLCONFIG and TEA_PATH_TKCONFIG. + Corrected search path in TEA_PATH_CONFIG and added + AC_SUBST($1_BIN_DIR) to TEA_LOAD_CONFIG so that packages that load + the configuration of another package can know where they loaded + it from. + +2005-03-18 Jeff Hobbs + + * tcl.m4 (TEA_CONFIG_CFLAGS): correct 2005-03-17 change to have + variant LD_SEARCH_FLAGS for gcc and cc builds. + + * tcl.m4 (TEA_PROG_TCLSH, TEA_PROG_WISH): correct x-compile check. + +2005-03-17 Jeff Hobbs + + * tcl.m4: Correct gcc build and HP-UX-11. + +2005-02-08 Jeff Hobbs + + * tcl.m4 (TEA_ADD_LIBS): don't touch lib args starting with -. + (TEA_CONFIG_CFLAGS): only define _DLL for CE in shared build. + (TEA_MAKE_LIB): set RANLIB* to : on Windows (it's not needed). + +2005-02-01 Jeff Hobbs + + * tcl.m4: redo of 2005-01-27 changes to correctly handle paths + with spaces. Win/CE and Win/64 builds now require a prebuilt + tclsh to handle conversion to short pathnames. This is done in + the new TEA_PATH_NOSPACE macro. For Win/CE|64, make CC just the + compiler and move the necessary includes to CFLAGS. + (TEA_CONFIG_CFLAGS): Add Solaris 64-bit gcc build support. + (TEA_PROG_TCLSH, TEA_PROG_WISH): Allow TCLSH_PROG and WISH_PROG to + be set in the env and prevent resetting. + (TEA_ADD_LIBS): On Windows using GCC (mingw), convert foo.lib + args to -lfoo, for use with mingw. + *** POTENTIAL INCOMPATABILITY *** + (TEA_CONFIG_CFLAGS): Fix AIX gcc builds to work out-of-box. + Bumped TEA to 3.2. + +2005-01-27 Jeff Hobbs + + * tcl.m4: remove cygpath calls to support msys. + Update base CE build assumption to "420,ARMV4,ARM,Pocket PC 2003". + Make STLIB_LD use $LINKBIN -lib. + +2005-01-25 Daniel Steffen + + * tcl.m4 (Darwin): fixed bug with static build linking to dynamic + library in /usr/lib etc instead of linking to static library earlier + in search path. [Tcl Bug 956908] + Removed obsolete references to Rhapsody. + +2004-12-29 Jeff Hobbs + + * tcl.m4: Updates for VC7 compatibility, fixing CFLAGS and LDFLAGS + options, using better default -O levels. [Bug 1092952, 1091967] + +2004-12-29 Joe English + + * tcl.m4: Do not use ${DBGX} suffix when building + shared libraries [patch #1081595, TIP #34] + +2004-09-07 Jeff Hobbs + + * tcl.m4 (TEA_CONFIG_CFLAGS): support eVC4 Win/CE builds + +2004-08-10 Jeff Hobbs + + * tcl.m4 (TEA_INIT, TEA_PREFIX): update handling of exec_prefix to + work around subdir configures since autoconf only propagates the + prefix (not exec_prefix). + +2004-07-23 Daniel Steffen + + * tcl.m4 (TEA_CONFIG_CFLAGS): Darwin section: brought inline with + Tcl 8.5 HEAD config, removed core specific & obsolete settings. + +2004-07-22 Jeff Hobbs + + * tcl.m4 (TEA_PATH_X): check in TK_DEFS for MAC_OSX_TK to see if + we are compiling on Aqua. Add TEA_WINDOWINGSYSTEM var that + reflects 'tk windowingsystem' value. + +2004-07-16 Jeff Hobbs + + * tcl.m4 (TEA_ENABLE_THREADS): force a threaded build when + building against a threaded core. + (CFLAGS_WARNING): Remove -Wconversion for gcc builds + (TEA_CONFIG_CFLAGS): Reorder configure.in for better 64-bit build + configuration, replacing EXTRA_CFLAGS with CFLAGS. [Bug #874058] + Update to latest Tcl 8.5 head config settings. + Call this TEA version 3.1. + +2004-04-29 Jeff Hobbs + + * tcl.m4 (TEA_TCL_64BIT_FLAGS): replace AC_TRY_RUN test with + AC_TRY_COMPILE for the long vs. long long check. (kenny) + +2004-04-26 Jeff Hobbs + + * tcl.m4 (TEA_TCL_64BIT_FLAGS): update against core tcl.m4 to + define TCL_WIDE_INT_IS_LONG if 'using long'. + +2004-03-19 Jeff Hobbs + + * tcl.m4: correct Windows builds getting LDFLAGS info in MAKE_LIB + +2004-02-11 Jeff Hobbs + + * tcl.m4: correct TCL_INCLUDES for private headers on Windows - it + doesn't need the eval. + +2004-02-10 Jeff Hobbs + + * tcl.m4: don't require TK_INCLUDES and TCL_INCLUDES to have the + DIR_NATIVE vars defined when using private headers on unix. + Allow $... to TEA_ADD_SOURCES for constructs like + TEA_ADD_SOURCES([\$(WIN_OBJECTS)]), that allow the developer to + place more in the Makefile.in. + tkUnixPort.h checks for HAVE_LIMITS_H, so do both HAVE and + CHECK on limits.h + +2003-12-10 Jeff Hobbs + + * Makefile.in: added TEA_ADD_LIBS, TEA_ADD_INCLUDES and + * configure: TEA_ADD_CFLAGS to configurable parameters with + * configure.in: PKG_* equivs in the Makefile. This allows the + * tclconfig/tcl.m4: user to worry less about actual magic VAR names. + Corrected Makefile.in to note that TEA_ADD_TCL_SOURCES requires + exact file names. + +2003-12-09 Jeff Hobbs + + * tcl.m4: updated OpenBSD support based on [Patch #775246] (cassoff) + +2003-12-05 Jeff Hobbs + + * configure: + * configure.in: + * Makefile.in (VPATH): readd $(srcdir) to front of VPATH as the + first part of VPATH can get chopped off. + Change .c.$(OBJEXT) rule to .c.@OBJEXT@ to support more makes. + * tclconfig/tcl.m4: add TEA_ADD_STUB_SOURCES to support libstub + generation and TEA_ADD_TCL_SOURCES to replace RUNTIME_SOURCES as + the way the user specifies library files. + +2003-12-03 Jeff Hobbs + + * configure: Update of TEA spec to (hopefully) simplify + * configure.in: some aspects of TEA by making use of more + * Makefile.in: AC 2.5x features. Use PACKAGE_NAME (instead + * generic/tclsample.c: of PACKAGE) and PACKAGE_VERSION (instead of + * tclconfig/tcl.m4: VERSION) arguments to AC_INIT as the TEA + package name and version. + Provide a version argument to TEA_INIT - starting with 3.0. + Drop all use of interior shell substs that older makefiles didn't + like. Use PKG_* naming convention instead. + Move specification of source files and public headers into + configure.in with TEA_ADD_SOURCES and TEA_ADD_HEADERS. These will + be munged during ./configure into the right obj file names (no + $(SOURCES:.c=.obj) needed). + There is almost nothing that should be touched in Makefile.in now + for the developer. May want to add a TEA_ADD_TCL_SOURCES for the + RUNTIME_SOURCES that remains. + Use SHLID_LD_FLAGS (instead of SHLID_LDFLAGS) as Tcl does. + Only specify the user requested LDFLAGS/CFLAGS in the Makefile, + don't mention the _OPTIMIZE/_DEBUG variants. + +2003-10-15 Jeff Hobbs + + * tcl.m4: create a TEA_SETUP_COMPILER_CC the precedes the + TEA_SETUP_COMPILER macro. They are split so the check for CC + occurs before any use of CC. Also add AC_PROG_CPP to the compiler + checks. + +2003-10-06 Jeff Hobbs + + * tcl.m4: Updated for autoconf 2.5x prereq. + Where TCL_WIDE_INT_TYPE would be __int64, defer to the code checks + in tcl.h, which also handles TCL_LL_MODIFIER* properly. + +2003-04-22 Jeff Hobbs + + * tcl.m4: correct default setting of ARCH for WinCE builds. + Correct \ escaping for CE sed macros. + +2003-04-10 Jeff Hobbs + + * tcl.m4: replace $(syscal) construct with older `syscall` for + systems where sh != bash. + +2003-04-09 Jeff Hobbs + + * tcl.m4 (TEA_WITH_CELIB): add --enable-wince and --with-celib + options for Windows/CE compilation support. Requires the + Microsoft eMbedded SDK and Keuchel's celib emulation layer. + +2003-02-18 Jeff Hobbs + + * tcl.m4 (TEA_ENABLE_THREADS): Make sure -lpthread gets passed on + the link line when checking for the pthread_attr_setstacksize + symbol. (dejong) + + * tcl.m4 (TEA_SETUP_COMPILER): added default calls to + TEA_TCL_EARLY_FLAGS, TEA_TCL_64BIT_FLAGS, + TEA_MISSING_POSIX_HEADERS and TEA_BUGGY_STRTOD. + +2003-02-14 Jeff Hobbs + + * tcl.m4: correct HP-UX ia64 --enable-64bit build flags + +2003-01-29 Jeff Hobbs + + * tcl.m4: check $prefix/lib as well as $exec_prefix/lib when + looking for tcl|tkConfig.sh, as this check is done before we would + set exec_prefix when the user does not define it. + +2003-01-21 Mo DeJong + + * tcl.m4 (TEA_CONFIG_CFLAGS): Fix build support + for mingw, the previous implementation would + use VC++ when compiling with mingw gcc. Don't + pass -fPIC since gcc always compiles pic code + under win32. Change some hard coded cases + of gcc to ${CC}. + +2002-10-15 Jeff Hobbs + + * tcl.m4: move the CFLAGS definition from TEA_ENABLE_SHARED to + TEA_MAKE_LIB because setting too early confuses other AC_* macros. + Correct the HP-11 SHLIB_LD_LIBS setting. + + * tcl.m4: add the CFLAGS definition into TEA_ENABLE_SHARED and + make it pick up the env CFLAGS at configure time. + +2002-10-09 Jeff Hobbs + + * tcl.m4: add --enable-symbols=mem option to enable TCL_MEM_DEBUG. + Improved AIX 64-bit build support, allow it on AIX-4 as well. + Enable 64-bit HP-11 compilation with gcc. + Enable 64-bit IRIX64-6 cc build support. + Correct FreeBSD thread library linkage. + Add OSF1 static build support. + Improve SunOS-5 shared build SHLIB_LD macro. + +2002-07-20 Zoran Vasiljevic + + * tcl.m4: Added MINGW32 to list of systems checked for Windows build. + Also, fixes some indentation issues with "--with-XXX" options. + +2002-04-23 Jeff Hobbs + + * tcl.m4 (TEA_ENABLE_THREADS): added USE_THREAD_ALLOC define to + use new threaded allocatory by default on Unix for Tcl 8.4. + (TEA_CONFIG_CFLAGS): corrected LD_SEARCH_FLAGS for FreeBSD-3+. + +2002-04-22 Jeff Hobbs + + * tcl.m4 (TEA_SETUP_COMPILER): removed call to AC_CYGWIN so that + we can use autoconf 2.5x as well as 2.13. This prevents us from + being able to warn against the use of cygwin gcc at configure + time, but allows autoconf 2.5x, which is what is shipped with most + newer systems. + +2002-04-11 Jeff Hobbs + + * tcl.m4: Enabled COFF as well as CV style debug info with + --enable-symbols to allow Dr. Watson users to see function info. + More info on debugging levels can be obtained at: + http://msdn.microsoft.com/library/en-us/dnvc60/html/gendepdebug.asp + +2002-04-03 Jeff Hobbs + + * tcl.m4: change all SC_* macros to TEA_*. The SC_ was for + Scriptics, which is no more. TEA represents a better, independent + prefix that won't need changing. + Added preliminary mingw gcc support. [Patch #538772] + Added TEA_PREFIX macro that handles defaulting the prefix and + exec_prefix vars to those used by Tcl if none were specified. + Added TEA_SETUP_COMPILER macro that encompasses the AC_PROG_CC + check and several other basic AC_PROG checks needed for making + executables. This greatly simplifies user's configure.in files. + Collapsed AIX-5 defines into AIX-* with extra checks for doing the + ELF stuff on AIX-5-ia64. + Updated TEA_ENABLE_THREADS to take an optional arg to allow + switching it on by default (for Thread) and add sanity checking to + warn the user if configuring threads incompatibly. + +2002-03-29 Jeff Hobbs + + * tcl.m4: made sure that SHLIB_LDFLAGS was set to LDFLAGS_DEFAULT. + Removed --enable-64bit support for AIX-4 because it wasn't correct. + Added -MT or -MD Windows linker switches to properly support + symbols-enabled builds. + +2002-03-28 Jeff Hobbs + + * tcl.m4: called AC_MSG_ERROR when SC_TEA_INIT wasn't called first + instead of calling it as that inlines it each time in shell code. + Changed Windows CFLAGS_OPTIMIZE to use -O2 instead of -Oti. + Noted TCL_LIB_VERSIONS_OK=nodots for Windows builds. + A few changes to support itcl (and perhaps others): + Added support for making your own stub libraries to SC_MAKE_LIB. + New SC_PATH_CONFIG and SC_LOAD_CONFIG that take a package name arg + and find that ${pkg}Config.sh file. itk uses this for itcl. + +2002-03-27 Jeff Hobbs + + * tcl.m4: made SC_LOAD_TKCONFIG recognize when working with a Tk + build dir setup. + Added EXTRA_CFLAGS and SHLIB_LD_LIBS substs to SC_CONFIG_CFLAGS. + Added XLIBSW onto LIBS when it is defined. + Remove TCL_LIBS from MAKE_LIB and correctly use SHLIB_LD_LIBS + instead to not rely as much on tclConfig.sh cached info. + Add TK_BIN_DIR to paths to find wish in SC_PROG_WISH. + These move towards making TEA much more independent of *Config.sh. + +2002-03-19 Jeff Hobbs + + * tcl.m4: corrected forgotten (UN)SHARED_LIB_SUFFIX and + SHLIB_SUFFIX defines for Win. + (SC_PATH_X): made this only do the check on unix platforms. + +2002-03-12 Jeff Hobbs + + * README.txt: updated to reflect fewer files + +2002-03-06 Jeff Hobbs + + * config.guess (removed): + * config.sub (removed): removed unnecessary files + + * installFile.tcl (removed): + * mkinstalldirs (removed): these aren't really necessary for + making TEA work + + * tcl.m4 (SC_PUBLIC_TCL_HEADERS, SC_PUBLIC_TK_HEADERS): don't + check /usr(/local)/include for includes on Windows when not using + gcc + +2002-03-05 Jeff Hobbs + + * tcl.m4: added warnings on Windows, removed RELPATH define and + added TCL_LIBS to MAKE_LIB macro. + + This import represents 2.0.0, or a new start at attempting to + make TEA much easier for C extension developers. + + **** moved from tclpro project to core tcl project, **** + **** renamed to 'tclconfig' **** + +2001-03-15 Karl Lehenbauer + + * installFile.tcl: Added updating of the modification time of + the target file whether we overwrote it or decided that it + hadn't changed. This was necessary for us to be able to + determine whether or not a module install touched the file. + +2001-03-08 Karl Lehenbauer + + * installFile.tcl: Added support for converting new-style (1.1+) + Cygnus drive paths to Tcl-style. + +2001-01-15 + + * tcl.m4: Added FreeBSD clause. + +2001-01-03 + + * tcl.m4: Fixed typo in SC_LIB_SPEC where it is checking + for exec-prefix. + +2000-12-01 + + * tcl.m4: Concatenated most of the Ajuba acsite.m4 file + so we don't need to modify the autoconf installation. + * config.guess: + * config.sub: + * installFile.tcl: + Added files from the itcl config subdirectory, + which should go away. + +2000-7-29 + + * Fixed the use of TCL_SRC_DIR and TK_SRC_DIR within + TCL_PRIVATE_INCLUDES and TK_PRIVATE_INCLUDES to match their recent + change from $(srcdir) to $(srcdir)/.. diff --git a/win/tclconfig/README.txt b/win/tclconfig/README.txt new file mode 100644 index 0000000..59b5a3e --- /dev/null +++ b/win/tclconfig/README.txt @@ -0,0 +1,26 @@ +These files comprise the basic building blocks for a Tcl Extension +Architecture (TEA) extension. For more information on TEA see: + + http://www.tcl.tk/doc/tea/ + +This package is part of the Tcl project at SourceForge, and latest +sources should be available there: + + http://tcl.sourceforge.net/ + +This package is a freely available open source package. You can do +virtually anything you like with it, such as modifying it, redistributing +it, and selling it either in whole or in part. + +CONTENTS +======== +The following is a short description of the files you will find in +the sample extension. + +README.txt This file + +install-sh Program used for copying binaries and script files + to their install locations. + +tcl.m4 Collection of Tcl autoconf macros. Included by a package's + aclocal.m4 to define TEA_* macros. diff --git a/win/tclconfig/install-sh b/win/tclconfig/install-sh new file mode 100755 index 0000000..7c34c3f --- /dev/null +++ b/win/tclconfig/install-sh @@ -0,0 +1,528 @@ +#!/bin/sh +# install - install a program, script, or datafile + +scriptversion=2011-04-20.01; # UTC + +# This originates from X11R5 (mit/util/scripts/install.sh), which was +# later released in X11R6 (xc/config/util/install.sh) with the +# following copyright and license. +# +# Copyright (C) 1994 X Consortium +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to +# deal in the Software without restriction, including without limitation the +# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +# sell copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- +# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +# +# Except as contained in this notice, the name of the X Consortium shall not +# be used in advertising or otherwise to promote the sale, use or other deal- +# ings in this Software without prior written authorization from the X Consor- +# tium. +# +# +# FSF changes to this file are in the public domain. +# +# Calling this script install-sh is preferred over install.sh, to prevent +# `make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# This script is compatible with the BSD install script, but was written +# from scratch. + +nl=' +' +IFS=" "" $nl" + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit=${DOITPROG-} +if test -z "$doit"; then + doit_exec=exec +else + doit_exec=$doit +fi + +# Put in absolute file names if you don't have them in your path; +# or use environment vars. + +chgrpprog=${CHGRPPROG-chgrp} +chmodprog=${CHMODPROG-chmod} +chownprog=${CHOWNPROG-chown} +cmpprog=${CMPPROG-cmp} +cpprog=${CPPROG-cp} +mkdirprog=${MKDIRPROG-mkdir} +mvprog=${MVPROG-mv} +rmprog=${RMPROG-rm} +stripprog=${STRIPPROG-strip} + +posix_glob='?' +initialize_posix_glob=' + test "$posix_glob" != "?" || { + if (set -f) 2>/dev/null; then + posix_glob= + else + posix_glob=: + fi + } +' + +posix_mkdir= + +# Desired mode of installed file. +mode=0755 + +chgrpcmd= +chmodcmd=$chmodprog +chowncmd= +mvcmd=$mvprog +rmcmd="$rmprog -f" +stripcmd= + +src= +dst= +dir_arg= +dst_arg= + +copy_on_change=false +no_target_directory= + +usage="\ +Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE + or: $0 [OPTION]... SRCFILES... DIRECTORY + or: $0 [OPTION]... -t DIRECTORY SRCFILES... + or: $0 [OPTION]... -d DIRECTORIES... + +In the 1st form, copy SRCFILE to DSTFILE. +In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. +In the 4th, create DIRECTORIES. + +Options: + --help display this help and exit. + --version display version info and exit. + + -c (ignored) + -C install only if different (preserve the last data modification time) + -d create directories instead of installing files. + -g GROUP $chgrpprog installed files to GROUP. + -m MODE $chmodprog installed files to MODE. + -o USER $chownprog installed files to USER. + -s $stripprog installed files. + -S $stripprog installed files. + -t DIRECTORY install into DIRECTORY. + -T report an error if DSTFILE is a directory. + +Environment variables override the default commands: + CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG + RMPROG STRIPPROG +" + +while test $# -ne 0; do + case $1 in + -c) ;; + + -C) copy_on_change=true;; + + -d) dir_arg=true;; + + -g) chgrpcmd="$chgrpprog $2" + shift;; + + --help) echo "$usage"; exit $?;; + + -m) mode=$2 + case $mode in + *' '* | *' '* | *' +'* | *'*'* | *'?'* | *'['*) + echo "$0: invalid mode: $mode" >&2 + exit 1;; + esac + shift;; + + -o) chowncmd="$chownprog $2" + shift;; + + -s) stripcmd=$stripprog;; + + -S) stripcmd="$stripprog $2" + shift;; + + -t) dst_arg=$2 + shift;; + + -T) no_target_directory=true;; + + --version) echo "$0 $scriptversion"; exit $?;; + + --) shift + break;; + + -*) echo "$0: invalid option: $1" >&2 + exit 1;; + + *) break;; + esac + shift +done + +if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then + # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dst_arg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dst_arg" + shift # fnord + fi + shift # arg + dst_arg=$arg + done +fi + +if test $# -eq 0; then + if test -z "$dir_arg"; then + echo "$0: no input file specified." >&2 + exit 1 + fi + # It's OK to call `install-sh -d' without argument. + # This can happen when creating conditional directories. + exit 0 +fi + +if test -z "$dir_arg"; then + do_exit='(exit $ret); exit $ret' + trap "ret=129; $do_exit" 1 + trap "ret=130; $do_exit" 2 + trap "ret=141; $do_exit" 13 + trap "ret=143; $do_exit" 15 + + # Set umask so as not to create temps with too-generous modes. + # However, 'strip' requires both read and write access to temps. + case $mode in + # Optimize common cases. + *644) cp_umask=133;; + *755) cp_umask=22;; + + *[0-7]) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw='% 200' + fi + cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; + *) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw=,u+rw + fi + cp_umask=$mode$u_plus_rw;; + esac +fi + +for src +do + # Protect names starting with `-'. + case $src in + -*) src=./$src;; + esac + + if test -n "$dir_arg"; then + dst=$src + dstdir=$dst + test -d "$dstdir" + dstdir_status=$? + else + + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + if test ! -f "$src" && test ! -d "$src"; then + echo "$0: $src does not exist." >&2 + exit 1 + fi + + if test -z "$dst_arg"; then + echo "$0: no destination specified." >&2 + exit 1 + fi + + dst=$dst_arg + # Protect names starting with `-'. + case $dst in + -*) dst=./$dst;; + esac + + # If destination is a directory, append the input filename; won't work + # if double slashes aren't ignored. + if test -d "$dst"; then + if test -n "$no_target_directory"; then + echo "$0: $dst_arg: Is a directory" >&2 + exit 1 + fi + dstdir=$dst + dst=$dstdir/`basename "$src"` + dstdir_status=0 + else + # Prefer dirname, but fall back on a substitute if dirname fails. + dstdir=` + (dirname "$dst") 2>/dev/null || + expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$dst" : 'X\(//\)[^/]' \| \ + X"$dst" : 'X\(//\)$' \| \ + X"$dst" : 'X\(/\)' \| . 2>/dev/null || + echo X"$dst" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q' + ` + + test -d "$dstdir" + dstdir_status=$? + fi + fi + + obsolete_mkdir_used=false + + if test $dstdir_status != 0; then + case $posix_mkdir in + '') + # Create intermediate dirs using mode 755 as modified by the umask. + # This is like FreeBSD 'install' as of 1997-10-28. + umask=`umask` + case $stripcmd.$umask in + # Optimize common cases. + *[2367][2367]) mkdir_umask=$umask;; + .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; + + *[0-7]) + mkdir_umask=`expr $umask + 22 \ + - $umask % 100 % 40 + $umask % 20 \ + - $umask % 10 % 4 + $umask % 2 + `;; + *) mkdir_umask=$umask,go-w;; + esac + + # With -d, create the new directory with the user-specified mode. + # Otherwise, rely on $mkdir_umask. + if test -n "$dir_arg"; then + mkdir_mode=-m$mode + else + mkdir_mode= + fi + + posix_mkdir=false + case $umask in + *[123567][0-7][0-7]) + # POSIX mkdir -p sets u+wx bits regardless of umask, which + # is incompatible with FreeBSD 'install' when (umask & 300) != 0. + ;; + *) + tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ + trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 + + if (umask $mkdir_umask && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 + then + if test -z "$dir_arg" || { + # Check for POSIX incompatibilities with -m. + # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or + # other-writeable bit of parent directory when it shouldn't. + # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. + ls_ld_tmpdir=`ls -ld "$tmpdir"` + case $ls_ld_tmpdir in + d????-?r-*) different_mode=700;; + d????-?--*) different_mode=755;; + *) false;; + esac && + $mkdirprog -m$different_mode -p -- "$tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$tmpdir"` + test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" + } + } + then posix_mkdir=: + fi + rmdir "$tmpdir/d" "$tmpdir" + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null + fi + trap '' 0;; + esac;; + esac + + if + $posix_mkdir && ( + umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" + ) + then : + else + + # The umask is ridiculous, or mkdir does not conform to POSIX, + # or it failed possibly due to a race condition. Create the + # directory the slow way, step by step, checking for races as we go. + + case $dstdir in + /*) prefix='/';; + -*) prefix='./';; + *) prefix='';; + esac + + eval "$initialize_posix_glob" + + oIFS=$IFS + IFS=/ + $posix_glob set -f + set fnord $dstdir + shift + $posix_glob set +f + IFS=$oIFS + + prefixes= + + for d + do + test -z "$d" && continue + + prefix=$prefix$d + if test -d "$prefix"; then + prefixes= + else + if $posix_mkdir; then + (umask=$mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break + # Don't fail if two instances are running concurrently. + test -d "$prefix" || exit 1 + else + case $prefix in + *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; + *) qprefix=$prefix;; + esac + prefixes="$prefixes '$qprefix'" + fi + fi + prefix=$prefix/ + done + + if test -n "$prefixes"; then + # Don't fail if two instances are running concurrently. + (umask $mkdir_umask && + eval "\$doit_exec \$mkdirprog $prefixes") || + test -d "$dstdir" || exit 1 + obsolete_mkdir_used=true + fi + fi + fi + + if test -n "$dir_arg"; then + { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && + { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || + test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 + else + + # Make a couple of temp file names in the proper directory. + dsttmp=$dstdir/_inst.$$_ + rmtmp=$dstdir/_rm.$$_ + + # Trap to clean up those temp files at exit. + trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 + + # Copy the file name to the temp name. + (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && + + # and set any options; do chmod last to preserve setuid bits. + # + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $cpprog $src $dsttmp" command. + # + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && + { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && + { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && + + # If -C, don't bother to copy if it wouldn't change the file. + if $copy_on_change && + old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && + new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && + + eval "$initialize_posix_glob" && + $posix_glob set -f && + set X $old && old=:$2:$4:$5:$6 && + set X $new && new=:$2:$4:$5:$6 && + $posix_glob set +f && + + test "$old" = "$new" && + $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 + then + rm -f "$dsttmp" + else + # Rename the file to the real destination. + $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || + + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + { + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + test ! -f "$dst" || + $doit $rmcmd -f "$dst" 2>/dev/null || + { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && + { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } + } || + { echo "$0: cannot unlink or rename $dst" >&2 + (exit 1); exit 1 + } + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dst" + } + fi || exit 1 + + trap '' 0 + fi +done + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/win/tclconfig/tcl.m4 b/win/tclconfig/tcl.m4 new file mode 100644 index 0000000..8bc9c83 --- /dev/null +++ b/win/tclconfig/tcl.m4 @@ -0,0 +1,4150 @@ +# tcl.m4 -- +# +# This file provides a set of autoconf macros to help TEA-enable +# a Tcl extension. +# +# Copyright (c) 1999-2000 Ajuba Solutions. +# Copyright (c) 2002-2005 ActiveState Corporation. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. + +AC_PREREQ(2.57) + +dnl TEA extensions pass us the version of TEA they think they +dnl are compatible with (must be set in TEA_INIT below) +dnl TEA_VERSION="3.9" + +# Possible values for key variables defined: +# +# TEA_WINDOWINGSYSTEM - win32 aqua x11 (mirrors 'tk windowingsystem') +# TEA_PLATFORM - windows unix +# + +#------------------------------------------------------------------------ +# TEA_PATH_TCLCONFIG -- +# +# Locate the tclConfig.sh file and perform a sanity check on +# the Tcl compile flags +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --with-tcl=... +# +# Defines the following vars: +# TCL_BIN_DIR Full path to the directory containing +# the tclConfig.sh file +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PATH_TCLCONFIG], [ + dnl TEA specific: Make sure we are initialized + AC_REQUIRE([TEA_INIT]) + # + # Ok, lets find the tcl configuration + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-tcl + # + + if test x"${no_tcl}" = x ; then + # we reset no_tcl in case something fails here + no_tcl=true + AC_ARG_WITH(tcl, + AC_HELP_STRING([--with-tcl], + [directory containing tcl configuration (tclConfig.sh)]), + with_tclconfig="${withval}") + AC_MSG_CHECKING([for Tcl configuration]) + AC_CACHE_VAL(ac_cv_c_tclconfig,[ + + # First check to see if --with-tcl was specified. + if test x"${with_tclconfig}" != x ; then + case "${with_tclconfig}" in + */tclConfig.sh ) + if test -f "${with_tclconfig}"; then + AC_MSG_WARN([--with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself]) + with_tclconfig="`echo "${with_tclconfig}" | sed 's!/tclConfig\.sh$!!'`" + fi ;; + esac + if test -f "${with_tclconfig}/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd "${with_tclconfig}"; pwd)`" + else + AC_MSG_ERROR([${with_tclconfig} directory doesn't contain tclConfig.sh]) + fi + fi + + # then check for a private Tcl installation + if test x"${ac_cv_c_tclconfig}" = x ; then + for i in \ + ../tcl \ + `ls -dr ../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../tcl[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../tcl[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../tcl \ + `ls -dr ../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../../tcl[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../tcl[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../../tcl \ + `ls -dr ../../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../../../tcl[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do + if test "${TEA_PLATFORM}" = "windows" \ + -a -f "$i/win/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i/win; pwd)`" + break + fi + if test -f "$i/unix/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i/unix; pwd)`" + break + fi + done + fi + + # on Darwin, check in Framework installation locations + if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tclconfig}" = x ; then + for i in `ls -d ~/Library/Frameworks 2>/dev/null` \ + `ls -d /Library/Frameworks 2>/dev/null` \ + `ls -d /Network/Library/Frameworks 2>/dev/null` \ + `ls -d /System/Library/Frameworks 2>/dev/null` \ + ; do + if test -f "$i/Tcl.framework/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i/Tcl.framework; pwd)`" + break + fi + done + fi + + # TEA specific: on Windows, check in common installation locations + if test "${TEA_PLATFORM}" = "windows" \ + -a x"${ac_cv_c_tclconfig}" = x ; then + for i in `ls -d C:/Tcl/lib 2>/dev/null` \ + `ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \ + ; do + if test -f "$i/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i; pwd)`" + break + fi + done + fi + + # check in a few common install locations + if test x"${ac_cv_c_tclconfig}" = x ; then + for i in `ls -d ${libdir} 2>/dev/null` \ + `ls -d ${exec_prefix}/lib 2>/dev/null` \ + `ls -d ${prefix}/lib 2>/dev/null` \ + `ls -d /usr/local/lib 2>/dev/null` \ + `ls -d /usr/contrib/lib 2>/dev/null` \ + `ls -d /usr/lib 2>/dev/null` \ + `ls -d /usr/lib64 2>/dev/null` \ + ; do + if test -f "$i/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i; pwd)`" + break + fi + done + fi + + # check in a few other private locations + if test x"${ac_cv_c_tclconfig}" = x ; then + for i in \ + ${srcdir}/../tcl \ + `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do + if test "${TEA_PLATFORM}" = "windows" \ + -a -f "$i/win/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i/win; pwd)`" + break + fi + if test -f "$i/unix/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i/unix; pwd)`" + break + fi + done + fi + ]) + + if test x"${ac_cv_c_tclconfig}" = x ; then + TCL_BIN_DIR="# no Tcl configs found" + AC_MSG_ERROR([Can't find Tcl configuration definitions. Use --with-tcl to specify a directory containing tclConfig.sh]) + else + no_tcl= + TCL_BIN_DIR="${ac_cv_c_tclconfig}" + AC_MSG_RESULT([found ${TCL_BIN_DIR}/tclConfig.sh]) + fi + fi +]) + +#------------------------------------------------------------------------ +# TEA_PATH_TKCONFIG -- +# +# Locate the tkConfig.sh file +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --with-tk=... +# +# Defines the following vars: +# TK_BIN_DIR Full path to the directory containing +# the tkConfig.sh file +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PATH_TKCONFIG], [ + # + # Ok, lets find the tk configuration + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-tk + # + + if test x"${no_tk}" = x ; then + # we reset no_tk in case something fails here + no_tk=true + AC_ARG_WITH(tk, + AC_HELP_STRING([--with-tk], + [directory containing tk configuration (tkConfig.sh)]), + with_tkconfig="${withval}") + AC_MSG_CHECKING([for Tk configuration]) + AC_CACHE_VAL(ac_cv_c_tkconfig,[ + + # First check to see if --with-tkconfig was specified. + if test x"${with_tkconfig}" != x ; then + case "${with_tkconfig}" in + */tkConfig.sh ) + if test -f "${with_tkconfig}"; then + AC_MSG_WARN([--with-tk argument should refer to directory containing tkConfig.sh, not to tkConfig.sh itself]) + with_tkconfig="`echo "${with_tkconfig}" | sed 's!/tkConfig\.sh$!!'`" + fi ;; + esac + if test -f "${with_tkconfig}/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd "${with_tkconfig}"; pwd)`" + else + AC_MSG_ERROR([${with_tkconfig} directory doesn't contain tkConfig.sh]) + fi + fi + + # then check for a private Tk library + if test x"${ac_cv_c_tkconfig}" = x ; then + for i in \ + ../tk \ + `ls -dr ../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../tk[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../tk[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../tk \ + `ls -dr ../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../../tk[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../tk[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../../tk \ + `ls -dr ../../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../../../tk[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do + if test "${TEA_PLATFORM}" = "windows" \ + -a -f "$i/win/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i/win; pwd)`" + break + fi + if test -f "$i/unix/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i/unix; pwd)`" + break + fi + done + fi + + # on Darwin, check in Framework installation locations + if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tkconfig}" = x ; then + for i in `ls -d ~/Library/Frameworks 2>/dev/null` \ + `ls -d /Library/Frameworks 2>/dev/null` \ + `ls -d /Network/Library/Frameworks 2>/dev/null` \ + `ls -d /System/Library/Frameworks 2>/dev/null` \ + ; do + if test -f "$i/Tk.framework/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i/Tk.framework; pwd)`" + break + fi + done + fi + + # check in a few common install locations + if test x"${ac_cv_c_tkconfig}" = x ; then + for i in `ls -d ${libdir} 2>/dev/null` \ + `ls -d ${exec_prefix}/lib 2>/dev/null` \ + `ls -d ${prefix}/lib 2>/dev/null` \ + `ls -d /usr/local/lib 2>/dev/null` \ + `ls -d /usr/contrib/lib 2>/dev/null` \ + `ls -d /usr/lib 2>/dev/null` \ + `ls -d /usr/lib64 2>/dev/null` \ + ; do + if test -f "$i/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i; pwd)`" + break + fi + done + fi + + # TEA specific: on Windows, check in common installation locations + if test "${TEA_PLATFORM}" = "windows" \ + -a x"${ac_cv_c_tkconfig}" = x ; then + for i in `ls -d C:/Tcl/lib 2>/dev/null` \ + `ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \ + ; do + if test -f "$i/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i; pwd)`" + break + fi + done + fi + + # check in a few other private locations + if test x"${ac_cv_c_tkconfig}" = x ; then + for i in \ + ${srcdir}/../tk \ + `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do + if test "${TEA_PLATFORM}" = "windows" \ + -a -f "$i/win/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i/win; pwd)`" + break + fi + if test -f "$i/unix/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i/unix; pwd)`" + break + fi + done + fi + ]) + + if test x"${ac_cv_c_tkconfig}" = x ; then + TK_BIN_DIR="# no Tk configs found" + AC_MSG_ERROR([Can't find Tk configuration definitions. Use --with-tk to specify a directory containing tkConfig.sh]) + else + no_tk= + TK_BIN_DIR="${ac_cv_c_tkconfig}" + AC_MSG_RESULT([found ${TK_BIN_DIR}/tkConfig.sh]) + fi + fi +]) + +#------------------------------------------------------------------------ +# TEA_LOAD_TCLCONFIG -- +# +# Load the tclConfig.sh file +# +# Arguments: +# +# Requires the following vars to be set: +# TCL_BIN_DIR +# +# Results: +# +# Substitutes the following vars: +# TCL_BIN_DIR +# TCL_SRC_DIR +# TCL_LIB_FILE +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_LOAD_TCLCONFIG], [ + AC_MSG_CHECKING([for existence of ${TCL_BIN_DIR}/tclConfig.sh]) + + if test -f "${TCL_BIN_DIR}/tclConfig.sh" ; then + AC_MSG_RESULT([loading]) + . "${TCL_BIN_DIR}/tclConfig.sh" + else + AC_MSG_RESULT([could not find ${TCL_BIN_DIR}/tclConfig.sh]) + fi + + # eval is required to do the TCL_DBGX substitution + eval "TCL_LIB_FILE=\"${TCL_LIB_FILE}\"" + eval "TCL_STUB_LIB_FILE=\"${TCL_STUB_LIB_FILE}\"" + + # If the TCL_BIN_DIR is the build directory (not the install directory), + # then set the common variable name to the value of the build variables. + # For example, the variable TCL_LIB_SPEC will be set to the value + # of TCL_BUILD_LIB_SPEC. An extension should make use of TCL_LIB_SPEC + # instead of TCL_BUILD_LIB_SPEC since it will work with both an + # installed and uninstalled version of Tcl. + if test -f "${TCL_BIN_DIR}/Makefile" ; then + TCL_LIB_SPEC="${TCL_BUILD_LIB_SPEC}" + TCL_STUB_LIB_SPEC="${TCL_BUILD_STUB_LIB_SPEC}" + TCL_STUB_LIB_PATH="${TCL_BUILD_STUB_LIB_PATH}" + elif test "`uname -s`" = "Darwin"; then + # If Tcl was built as a framework, attempt to use the libraries + # from the framework at the given location so that linking works + # against Tcl.framework installed in an arbitrary location. + case ${TCL_DEFS} in + *TCL_FRAMEWORK*) + if test -f "${TCL_BIN_DIR}/${TCL_LIB_FILE}"; then + for i in "`cd "${TCL_BIN_DIR}"; pwd`" \ + "`cd "${TCL_BIN_DIR}"/../..; pwd`"; do + if test "`basename "$i"`" = "${TCL_LIB_FILE}.framework"; then + TCL_LIB_SPEC="-F`dirname "$i" | sed -e 's/ /\\\\ /g'` -framework ${TCL_LIB_FILE}" + break + fi + done + fi + if test -f "${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}"; then + TCL_STUB_LIB_SPEC="-L`echo "${TCL_BIN_DIR}" | sed -e 's/ /\\\\ /g'` ${TCL_STUB_LIB_FLAG}" + TCL_STUB_LIB_PATH="${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}" + fi + ;; + esac + fi + + # eval is required to do the TCL_DBGX substitution + eval "TCL_LIB_FLAG=\"${TCL_LIB_FLAG}\"" + eval "TCL_LIB_SPEC=\"${TCL_LIB_SPEC}\"" + eval "TCL_STUB_LIB_FLAG=\"${TCL_STUB_LIB_FLAG}\"" + eval "TCL_STUB_LIB_SPEC=\"${TCL_STUB_LIB_SPEC}\"" + + AC_SUBST(TCL_VERSION) + AC_SUBST(TCL_PATCH_LEVEL) + AC_SUBST(TCL_BIN_DIR) + AC_SUBST(TCL_SRC_DIR) + + AC_SUBST(TCL_LIB_FILE) + AC_SUBST(TCL_LIB_FLAG) + AC_SUBST(TCL_LIB_SPEC) + + AC_SUBST(TCL_STUB_LIB_FILE) + AC_SUBST(TCL_STUB_LIB_FLAG) + AC_SUBST(TCL_STUB_LIB_SPEC) + + AC_MSG_CHECKING([platform]) + hold_cc=$CC; CC="$TCL_CC" + AC_TRY_COMPILE(,[ + #ifdef _WIN32 + #error win32 + #endif + ], TEA_PLATFORM="unix", + TEA_PLATFORM="windows" + ) + CC=$hold_cc + AC_MSG_RESULT($TEA_PLATFORM) + + # The BUILD_$pkg is to define the correct extern storage class + # handling when making this package + AC_DEFINE_UNQUOTED(BUILD_${PACKAGE_NAME}, [], + [Building extension source?]) + # Do this here as we have fully defined TEA_PLATFORM now + if test "${TEA_PLATFORM}" = "windows" ; then + EXEEXT=".exe" + CLEANFILES="$CLEANFILES *.lib *.dll *.pdb *.exp" + fi + + # TEA specific: + AC_SUBST(CLEANFILES) + AC_SUBST(TCL_LIBS) + AC_SUBST(TCL_DEFS) + AC_SUBST(TCL_EXTRA_CFLAGS) + AC_SUBST(TCL_LD_FLAGS) + AC_SUBST(TCL_SHLIB_LD_LIBS) +]) + +#------------------------------------------------------------------------ +# TEA_LOAD_TKCONFIG -- +# +# Load the tkConfig.sh file +# +# Arguments: +# +# Requires the following vars to be set: +# TK_BIN_DIR +# +# Results: +# +# Sets the following vars that should be in tkConfig.sh: +# TK_BIN_DIR +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_LOAD_TKCONFIG], [ + AC_MSG_CHECKING([for existence of ${TK_BIN_DIR}/tkConfig.sh]) + + if test -f "${TK_BIN_DIR}/tkConfig.sh" ; then + AC_MSG_RESULT([loading]) + . "${TK_BIN_DIR}/tkConfig.sh" + else + AC_MSG_RESULT([could not find ${TK_BIN_DIR}/tkConfig.sh]) + fi + + # eval is required to do the TK_DBGX substitution + eval "TK_LIB_FILE=\"${TK_LIB_FILE}\"" + eval "TK_STUB_LIB_FILE=\"${TK_STUB_LIB_FILE}\"" + + # If the TK_BIN_DIR is the build directory (not the install directory), + # then set the common variable name to the value of the build variables. + # For example, the variable TK_LIB_SPEC will be set to the value + # of TK_BUILD_LIB_SPEC. An extension should make use of TK_LIB_SPEC + # instead of TK_BUILD_LIB_SPEC since it will work with both an + # installed and uninstalled version of Tcl. + if test -f "${TK_BIN_DIR}/Makefile" ; then + TK_LIB_SPEC="${TK_BUILD_LIB_SPEC}" + TK_STUB_LIB_SPEC="${TK_BUILD_STUB_LIB_SPEC}" + TK_STUB_LIB_PATH="${TK_BUILD_STUB_LIB_PATH}" + elif test "`uname -s`" = "Darwin"; then + # If Tk was built as a framework, attempt to use the libraries + # from the framework at the given location so that linking works + # against Tk.framework installed in an arbitrary location. + case ${TK_DEFS} in + *TK_FRAMEWORK*) + if test -f "${TK_BIN_DIR}/${TK_LIB_FILE}"; then + for i in "`cd "${TK_BIN_DIR}"; pwd`" \ + "`cd "${TK_BIN_DIR}"/../..; pwd`"; do + if test "`basename "$i"`" = "${TK_LIB_FILE}.framework"; then + TK_LIB_SPEC="-F`dirname "$i" | sed -e 's/ /\\\\ /g'` -framework ${TK_LIB_FILE}" + break + fi + done + fi + if test -f "${TK_BIN_DIR}/${TK_STUB_LIB_FILE}"; then + TK_STUB_LIB_SPEC="-L` echo "${TK_BIN_DIR}" | sed -e 's/ /\\\\ /g'` ${TK_STUB_LIB_FLAG}" + TK_STUB_LIB_PATH="${TK_BIN_DIR}/${TK_STUB_LIB_FILE}" + fi + ;; + esac + fi + + # eval is required to do the TK_DBGX substitution + eval "TK_LIB_FLAG=\"${TK_LIB_FLAG}\"" + eval "TK_LIB_SPEC=\"${TK_LIB_SPEC}\"" + eval "TK_STUB_LIB_FLAG=\"${TK_STUB_LIB_FLAG}\"" + eval "TK_STUB_LIB_SPEC=\"${TK_STUB_LIB_SPEC}\"" + + # TEA specific: Ensure windowingsystem is defined + if test "${TEA_PLATFORM}" = "unix" ; then + case ${TK_DEFS} in + *MAC_OSX_TK*) + AC_DEFINE(MAC_OSX_TK, 1, [Are we building against Mac OS X TkAqua?]) + TEA_WINDOWINGSYSTEM="aqua" + ;; + *) + TEA_WINDOWINGSYSTEM="x11" + ;; + esac + elif test "${TEA_PLATFORM}" = "windows" ; then + TEA_WINDOWINGSYSTEM="win32" + fi + + AC_SUBST(TK_VERSION) + AC_SUBST(TK_BIN_DIR) + AC_SUBST(TK_SRC_DIR) + + AC_SUBST(TK_LIB_FILE) + AC_SUBST(TK_LIB_FLAG) + AC_SUBST(TK_LIB_SPEC) + + AC_SUBST(TK_STUB_LIB_FILE) + AC_SUBST(TK_STUB_LIB_FLAG) + AC_SUBST(TK_STUB_LIB_SPEC) + + # TEA specific: + AC_SUBST(TK_LIBS) + AC_SUBST(TK_XINCLUDES) +]) + +#------------------------------------------------------------------------ +# TEA_PROG_TCLSH +# Determine the fully qualified path name of the tclsh executable +# in the Tcl build directory or the tclsh installed in a bin +# directory. This macro will correctly determine the name +# of the tclsh executable even if tclsh has not yet been +# built in the build directory. The tclsh found is always +# associated with a tclConfig.sh file. This tclsh should be used +# only for running extension test cases. It should never be +# or generation of files (like pkgIndex.tcl) at build time. +# +# Arguments: +# none +# +# Results: +# Substitutes the following vars: +# TCLSH_PROG +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PROG_TCLSH], [ + AC_MSG_CHECKING([for tclsh]) + if test -f "${TCL_BIN_DIR}/Makefile" ; then + # tclConfig.sh is in Tcl build directory + if test "${TEA_PLATFORM}" = "windows"; then + TCLSH_PROG="${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}" + else + TCLSH_PROG="${TCL_BIN_DIR}/tclsh" + fi + else + # tclConfig.sh is in install location + if test "${TEA_PLATFORM}" = "windows"; then + TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}" + else + TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}.${TCL_MINOR_VERSION}${TCL_DBGX}" + fi + list="`ls -d ${TCL_BIN_DIR}/../bin 2>/dev/null` \ + `ls -d ${TCL_BIN_DIR}/.. 2>/dev/null` \ + `ls -d ${TCL_PREFIX}/bin 2>/dev/null`" + for i in $list ; do + if test -f "$i/${TCLSH_PROG}" ; then + REAL_TCL_BIN_DIR="`cd "$i"; pwd`/" + break + fi + done + TCLSH_PROG="${REAL_TCL_BIN_DIR}${TCLSH_PROG}" + fi + AC_MSG_RESULT([${TCLSH_PROG}]) + AC_SUBST(TCLSH_PROG) +]) + +#------------------------------------------------------------------------ +# TEA_PROG_WISH +# Determine the fully qualified path name of the wish executable +# in the Tk build directory or the wish installed in a bin +# directory. This macro will correctly determine the name +# of the wish executable even if wish has not yet been +# built in the build directory. The wish found is always +# associated with a tkConfig.sh file. This wish should be used +# only for running extension test cases. It should never be +# or generation of files (like pkgIndex.tcl) at build time. +# +# Arguments: +# none +# +# Results: +# Substitutes the following vars: +# WISH_PROG +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PROG_WISH], [ + AC_MSG_CHECKING([for wish]) + if test -f "${TK_BIN_DIR}/Makefile" ; then + # tkConfig.sh is in Tk build directory + if test "${TEA_PLATFORM}" = "windows"; then + WISH_PROG="${TK_BIN_DIR}/wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}${EXEEXT}" + else + WISH_PROG="${TK_BIN_DIR}/wish" + fi + else + # tkConfig.sh is in install location + if test "${TEA_PLATFORM}" = "windows"; then + WISH_PROG="wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}${EXEEXT}" + else + WISH_PROG="wish${TK_MAJOR_VERSION}.${TK_MINOR_VERSION}${TK_DBGX}" + fi + list="`ls -d ${TK_BIN_DIR}/../bin 2>/dev/null` \ + `ls -d ${TK_BIN_DIR}/.. 2>/dev/null` \ + `ls -d ${TK_PREFIX}/bin 2>/dev/null`" + for i in $list ; do + if test -f "$i/${WISH_PROG}" ; then + REAL_TK_BIN_DIR="`cd "$i"; pwd`/" + break + fi + done + WISH_PROG="${REAL_TK_BIN_DIR}${WISH_PROG}" + fi + AC_MSG_RESULT([${WISH_PROG}]) + AC_SUBST(WISH_PROG) +]) + +#------------------------------------------------------------------------ +# TEA_ENABLE_SHARED -- +# +# Allows the building of shared libraries +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --enable-shared=yes|no +# +# Defines the following vars: +# STATIC_BUILD Used for building import/export libraries +# on Windows. +# +# Sets the following vars: +# SHARED_BUILD Value of 1 or 0 +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_ENABLE_SHARED], [ + AC_MSG_CHECKING([how to build libraries]) + AC_ARG_ENABLE(shared, + AC_HELP_STRING([--enable-shared], + [build and link with shared libraries (default: on)]), + [tcl_ok=$enableval], [tcl_ok=yes]) + + if test "${enable_shared+set}" = set; then + enableval="$enable_shared" + tcl_ok=$enableval + else + tcl_ok=yes + fi + + if test "$tcl_ok" = "yes" ; then + AC_MSG_RESULT([shared]) + SHARED_BUILD=1 + else + AC_MSG_RESULT([static]) + SHARED_BUILD=0 + AC_DEFINE(STATIC_BUILD, 1, [Is this a static build?]) + fi + AC_SUBST(SHARED_BUILD) +]) + +#------------------------------------------------------------------------ +# TEA_ENABLE_THREADS -- +# +# Specify if thread support should be enabled. If "yes" is specified +# as an arg (optional), threads are enabled by default, "no" means +# threads are disabled. "yes" is the default. +# +# TCL_THREADS is checked so that if you are compiling an extension +# against a threaded core, your extension must be compiled threaded +# as well. +# +# Note that it is legal to have a thread enabled extension run in a +# threaded or non-threaded Tcl core, but a non-threaded extension may +# only run in a non-threaded Tcl core. +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --enable-threads +# +# Sets the following vars: +# THREADS_LIBS Thread library(s) +# +# Defines the following vars: +# TCL_THREADS +# _REENTRANT +# _THREAD_SAFE +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_ENABLE_THREADS], [ + AC_ARG_ENABLE(threads, + AC_HELP_STRING([--enable-threads], + [build with threads]), + [tcl_ok=$enableval], [tcl_ok=yes]) + + if test "${enable_threads+set}" = set; then + enableval="$enable_threads" + tcl_ok=$enableval + else + tcl_ok=yes + fi + + if test "$tcl_ok" = "yes" -o "${TCL_THREADS}" = 1; then + TCL_THREADS=1 + + if test "${TEA_PLATFORM}" != "windows" ; then + # We are always OK on Windows, so check what this platform wants: + + # USE_THREAD_ALLOC tells us to try the special thread-based + # allocator that significantly reduces lock contention + AC_DEFINE(USE_THREAD_ALLOC, 1, + [Do we want to use the threaded memory allocator?]) + AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?]) + if test "`uname -s`" = "SunOS" ; then + AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1, + [Do we really want to follow the standard? Yes we do!]) + fi + AC_DEFINE(_THREAD_SAFE, 1, [Do we want the thread-safe OS API?]) + AC_CHECK_LIB(pthread,pthread_mutex_init,tcl_ok=yes,tcl_ok=no) + if test "$tcl_ok" = "no"; then + # Check a little harder for __pthread_mutex_init in the same + # library, as some systems hide it there until pthread.h is + # defined. We could alternatively do an AC_TRY_COMPILE with + # pthread.h, but that will work with libpthread really doesn't + # exist, like AIX 4.2. [Bug: 4359] + AC_CHECK_LIB(pthread, __pthread_mutex_init, + tcl_ok=yes, tcl_ok=no) + fi + + if test "$tcl_ok" = "yes"; then + # The space is needed + THREADS_LIBS=" -lpthread" + else + AC_CHECK_LIB(pthreads, pthread_mutex_init, + tcl_ok=yes, tcl_ok=no) + if test "$tcl_ok" = "yes"; then + # The space is needed + THREADS_LIBS=" -lpthreads" + else + AC_CHECK_LIB(c, pthread_mutex_init, + tcl_ok=yes, tcl_ok=no) + if test "$tcl_ok" = "no"; then + AC_CHECK_LIB(c_r, pthread_mutex_init, + tcl_ok=yes, tcl_ok=no) + if test "$tcl_ok" = "yes"; then + # The space is needed + THREADS_LIBS=" -pthread" + else + TCL_THREADS=0 + AC_MSG_WARN([Do not know how to find pthread lib on your system - thread support disabled]) + fi + fi + fi + fi + fi + else + TCL_THREADS=0 + fi + # Do checking message here to not mess up interleaved configure output + AC_MSG_CHECKING([for building with threads]) + if test "${TCL_THREADS}" = 1; then + AC_DEFINE(TCL_THREADS, 1, [Are we building with threads enabled?]) + AC_MSG_RESULT([yes (default)]) + else + AC_MSG_RESULT([no]) + fi + # TCL_THREADS sanity checking. See if our request for building with + # threads is the same as the way Tcl was built. If not, warn the user. + case ${TCL_DEFS} in + *THREADS=1*) + if test "${TCL_THREADS}" = "0"; then + AC_MSG_WARN([ + Building ${PACKAGE_NAME} without threads enabled, but building against Tcl + that IS thread-enabled. It is recommended to use --enable-threads.]) + fi + ;; + *) + if test "${TCL_THREADS}" = "1"; then + AC_MSG_WARN([ + --enable-threads requested, but building against a Tcl that is NOT + thread-enabled. This is an OK configuration that will also run in + a thread-enabled core.]) + fi + ;; + esac + AC_SUBST(TCL_THREADS) +]) + +#------------------------------------------------------------------------ +# TEA_ENABLE_SYMBOLS -- +# +# Specify if debugging symbols should be used. +# Memory (TCL_MEM_DEBUG) debugging can also be enabled. +# +# Arguments: +# none +# +# TEA varies from core Tcl in that C|LDFLAGS_DEFAULT receives +# the value of C|LDFLAGS_OPTIMIZE|DEBUG already substituted. +# Requires the following vars to be set in the Makefile: +# CFLAGS_DEFAULT +# LDFLAGS_DEFAULT +# +# Results: +# +# Adds the following arguments to configure: +# --enable-symbols +# +# Defines the following vars: +# CFLAGS_DEFAULT Sets to $(CFLAGS_DEBUG) if true +# Sets to "$(CFLAGS_OPTIMIZE) -DNDEBUG" if false +# LDFLAGS_DEFAULT Sets to $(LDFLAGS_DEBUG) if true +# Sets to $(LDFLAGS_OPTIMIZE) if false +# DBGX Formerly used as debug library extension; +# always blank now. +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_ENABLE_SYMBOLS], [ + dnl TEA specific: Make sure we are initialized + AC_REQUIRE([TEA_CONFIG_CFLAGS]) + AC_MSG_CHECKING([for build with symbols]) + AC_ARG_ENABLE(symbols, + AC_HELP_STRING([--enable-symbols], + [build with debugging symbols (default: off)]), + [tcl_ok=$enableval], [tcl_ok=no]) + DBGX="" + if test "$tcl_ok" = "no"; then + CFLAGS_DEFAULT="${CFLAGS_OPTIMIZE} -DNDEBUG" + LDFLAGS_DEFAULT="${LDFLAGS_OPTIMIZE}" + AC_MSG_RESULT([no]) + else + CFLAGS_DEFAULT="${CFLAGS_DEBUG}" + LDFLAGS_DEFAULT="${LDFLAGS_DEBUG}" + if test "$tcl_ok" = "yes"; then + AC_MSG_RESULT([yes (standard debugging)]) + fi + fi + # TEA specific: + if test "${TEA_PLATFORM}" != "windows" ; then + LDFLAGS_DEFAULT="${LDFLAGS}" + fi + AC_SUBST(CFLAGS_DEFAULT) + AC_SUBST(LDFLAGS_DEFAULT) + AC_SUBST(TCL_DBGX) + + if test "$tcl_ok" = "mem" -o "$tcl_ok" = "all"; then + AC_DEFINE(TCL_MEM_DEBUG, 1, [Is memory debugging enabled?]) + fi + + if test "$tcl_ok" != "yes" -a "$tcl_ok" != "no"; then + if test "$tcl_ok" = "all"; then + AC_MSG_RESULT([enabled symbols mem debugging]) + else + AC_MSG_RESULT([enabled $tcl_ok debugging]) + fi + fi +]) + +#------------------------------------------------------------------------ +# TEA_ENABLE_LANGINFO -- +# +# Allows use of modern nl_langinfo check for better l10n. +# This is only relevant for Unix. +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --enable-langinfo=yes|no (default is yes) +# +# Defines the following vars: +# HAVE_LANGINFO Triggers use of nl_langinfo if defined. +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_ENABLE_LANGINFO], [ + AC_ARG_ENABLE(langinfo, + AC_HELP_STRING([--enable-langinfo], + [use nl_langinfo if possible to determine encoding at startup, otherwise use old heuristic (default: on)]), + [langinfo_ok=$enableval], [langinfo_ok=yes]) + + HAVE_LANGINFO=0 + if test "$langinfo_ok" = "yes"; then + AC_CHECK_HEADER(langinfo.h,[langinfo_ok=yes],[langinfo_ok=no]) + fi + AC_MSG_CHECKING([whether to use nl_langinfo]) + if test "$langinfo_ok" = "yes"; then + AC_CACHE_VAL(tcl_cv_langinfo_h, [ + AC_TRY_COMPILE([#include ], [nl_langinfo(CODESET);], + [tcl_cv_langinfo_h=yes],[tcl_cv_langinfo_h=no])]) + AC_MSG_RESULT([$tcl_cv_langinfo_h]) + if test $tcl_cv_langinfo_h = yes; then + AC_DEFINE(HAVE_LANGINFO, 1, [Do we have nl_langinfo()?]) + fi + else + AC_MSG_RESULT([$langinfo_ok]) + fi +]) + +#-------------------------------------------------------------------- +# TEA_CONFIG_SYSTEM +# +# Determine what the system is (some things cannot be easily checked +# on a feature-driven basis, alas). This can usually be done via the +# "uname" command. +# +# Arguments: +# none +# +# Results: +# Defines the following var: +# +# system - System/platform/version identification code. +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_CONFIG_SYSTEM], [ + AC_CACHE_CHECK([system version], tcl_cv_sys_version, [ + # TEA specific: + if test "${TEA_PLATFORM}" = "windows" ; then + tcl_cv_sys_version=windows + else + tcl_cv_sys_version=`uname -s`-`uname -r` + if test "$?" -ne 0 ; then + AC_MSG_WARN([can't find uname command]) + tcl_cv_sys_version=unknown + else + if test "`uname -s`" = "AIX" ; then + tcl_cv_sys_version=AIX-`uname -v`.`uname -r` + fi + fi + fi + ]) + system=$tcl_cv_sys_version +]) + +#-------------------------------------------------------------------- +# TEA_CONFIG_CFLAGS +# +# Try to determine the proper flags to pass to the compiler +# for building shared libraries and other such nonsense. +# +# Arguments: +# none +# +# Results: +# +# Defines and substitutes the following vars: +# +# DL_OBJS, DL_LIBS - removed for TEA, only needed by core. +# LDFLAGS - Flags to pass to the compiler when linking object +# files into an executable application binary such +# as tclsh. +# LD_SEARCH_FLAGS-Flags to pass to ld, such as "-R /usr/local/tcl/lib", +# that tell the run-time dynamic linker where to look +# for shared libraries such as libtcl.so. Depends on +# the variable LIB_RUNTIME_DIR in the Makefile. Could +# be the same as CC_SEARCH_FLAGS if ${CC} is used to link. +# CC_SEARCH_FLAGS-Flags to pass to ${CC}, such as "-Wl,-rpath,/usr/local/tcl/lib", +# that tell the run-time dynamic linker where to look +# for shared libraries such as libtcl.so. Depends on +# the variable LIB_RUNTIME_DIR in the Makefile. +# SHLIB_CFLAGS - Flags to pass to cc when compiling the components +# of a shared library (may request position-independent +# code, among other things). +# SHLIB_LD - Base command to use for combining object files +# into a shared library. +# SHLIB_LD_LIBS - Dependent libraries for the linker to scan when +# creating shared libraries. This symbol typically +# goes at the end of the "ld" commands that build +# shared libraries. The value of the symbol defaults to +# "${LIBS}" if all of the dependent libraries should +# be specified when creating a shared library. If +# dependent libraries should not be specified (as on +# SunOS 4.x, where they cause the link to fail, or in +# general if Tcl and Tk aren't themselves shared +# libraries), then this symbol has an empty string +# as its value. +# SHLIB_SUFFIX - Suffix to use for the names of dynamically loadable +# extensions. An empty string means we don't know how +# to use shared libraries on this platform. +# LIB_SUFFIX - Specifies everything that comes after the "libfoo" +# in a static or shared library name, using the $PACKAGE_VERSION variable +# to put the version in the right place. This is used +# by platforms that need non-standard library names. +# Examples: ${PACKAGE_VERSION}.so.1.1 on NetBSD, since it needs +# to have a version after the .so, and ${PACKAGE_VERSION}.a +# on AIX, since a shared library needs to have +# a .a extension whereas shared objects for loadable +# extensions have a .so extension. Defaults to +# ${PACKAGE_VERSION}${SHLIB_SUFFIX}. +# CFLAGS_DEBUG - +# Flags used when running the compiler in debug mode +# CFLAGS_OPTIMIZE - +# Flags used when running the compiler in optimize mode +# CFLAGS - Additional CFLAGS added as necessary (usually 64-bit) +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_CONFIG_CFLAGS], [ + dnl TEA specific: Make sure we are initialized + AC_REQUIRE([TEA_INIT]) + + # Step 0.a: Enable 64 bit support? + + AC_MSG_CHECKING([if 64bit support is requested]) + AC_ARG_ENABLE(64bit, + AC_HELP_STRING([--enable-64bit], + [enable 64bit support (default: off)]), + [do64bit=$enableval], [do64bit=no]) + AC_MSG_RESULT([$do64bit]) + + # Step 0.b: Enable Solaris 64 bit VIS support? + + AC_MSG_CHECKING([if 64bit Sparc VIS support is requested]) + AC_ARG_ENABLE(64bit-vis, + AC_HELP_STRING([--enable-64bit-vis], + [enable 64bit Sparc VIS support (default: off)]), + [do64bitVIS=$enableval], [do64bitVIS=no]) + AC_MSG_RESULT([$do64bitVIS]) + # Force 64bit on with VIS + AS_IF([test "$do64bitVIS" = "yes"], [do64bit=yes]) + + # Step 0.c: Check if visibility support is available. Do this here so + # that platform specific alternatives can be used below if this fails. + + AC_CACHE_CHECK([if compiler supports visibility "hidden"], + tcl_cv_cc_visibility_hidden, [ + hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -Werror" + AC_TRY_LINK([ + extern __attribute__((__visibility__("hidden"))) void f(void); + void f(void) {}], [f();], tcl_cv_cc_visibility_hidden=yes, + tcl_cv_cc_visibility_hidden=no) + CFLAGS=$hold_cflags]) + AS_IF([test $tcl_cv_cc_visibility_hidden = yes], [ + AC_DEFINE(MODULE_SCOPE, + [extern __attribute__((__visibility__("hidden")))], + [Compiler support for module scope symbols]) + AC_DEFINE(HAVE_HIDDEN, [1], [Compiler support for module scope symbols]) + ]) + + # Step 0.d: Disable -rpath support? + + AC_MSG_CHECKING([if rpath support is requested]) + AC_ARG_ENABLE(rpath, + AC_HELP_STRING([--disable-rpath], + [disable rpath support (default: on)]), + [doRpath=$enableval], [doRpath=yes]) + AC_MSG_RESULT([$doRpath]) + + # TEA specific: Cross-compiling options for Windows/CE builds? + + AS_IF([test "${TEA_PLATFORM}" = windows], [ + AC_MSG_CHECKING([if Windows/CE build is requested]) + AC_ARG_ENABLE(wince, + AC_HELP_STRING([--enable-wince], + [enable Win/CE support (where applicable)]), + [doWince=$enableval], [doWince=no]) + AC_MSG_RESULT([$doWince]) + ]) + + # Set the variable "system" to hold the name and version number + # for the system. + + TEA_CONFIG_SYSTEM + + # Require ranlib early so we can override it in special cases below. + + AC_REQUIRE([AC_PROG_RANLIB]) + + # Set configuration options based on system name and version. + # This is similar to Tcl's unix/tcl.m4 except that we've added a + # "windows" case and removed some core-only vars. + + do64bit_ok=no + # default to '{$LIBS}' and set to "" on per-platform necessary basis + SHLIB_LD_LIBS='${LIBS}' + # When ld needs options to work in 64-bit mode, put them in + # LDFLAGS_ARCH so they eventually end up in LDFLAGS even if [load] + # is disabled by the user. [Bug 1016796] + LDFLAGS_ARCH="" + UNSHARED_LIB_SUFFIX="" + # TEA specific: use PACKAGE_VERSION instead of VERSION + TCL_TRIM_DOTS='`echo ${PACKAGE_VERSION} | tr -d .`' + ECHO_VERSION='`echo ${PACKAGE_VERSION}`' + TCL_LIB_VERSIONS_OK=ok + CFLAGS_DEBUG=-g + AS_IF([test "$GCC" = yes], [ + CFLAGS_OPTIMIZE=-O2 + CFLAGS_WARNING="-Wall" + ], [ + CFLAGS_OPTIMIZE=-O + CFLAGS_WARNING="" + ]) + AC_CHECK_TOOL(AR, ar) + STLIB_LD='${AR} cr' + LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH" + AS_IF([test "x$SHLIB_VERSION" = x],[SHLIB_VERSION="1.0"]) + case $system in + # TEA specific: + windows) + # This is a 2-stage check to make sure we have the 64-bit SDK + # We have to know where the SDK is installed. + # This magic is based on MS Platform SDK for Win2003 SP1 - hobbs + # MACHINE is IX86 for LINK, but this is used by the manifest, + # which requires x86|amd64|ia64. + MACHINE="X86" + if test "$do64bit" != "no" ; then + if test "x${MSSDK}x" = "xx" ; then + MSSDK="C:/Progra~1/Microsoft Platform SDK" + fi + MSSDK=`echo "$MSSDK" | sed -e 's!\\\!/!g'` + PATH64="" + case "$do64bit" in + amd64|x64|yes) + MACHINE="AMD64" ; # default to AMD64 64-bit build + PATH64="${MSSDK}/Bin/Win64/x86/AMD64" + ;; + ia64) + MACHINE="IA64" + PATH64="${MSSDK}/Bin/Win64" + ;; + esac + if test "$GCC" != "yes" -a ! -d "${PATH64}" ; then + AC_MSG_WARN([Could not find 64-bit $MACHINE SDK to enable 64bit mode]) + AC_MSG_WARN([Ensure latest Platform SDK is installed]) + do64bit="no" + else + AC_MSG_RESULT([ Using 64-bit $MACHINE mode]) + do64bit_ok="yes" + fi + fi + + if test "$doWince" != "no" ; then + if test "$do64bit" != "no" ; then + AC_MSG_ERROR([Windows/CE and 64-bit builds incompatible]) + fi + if test "$GCC" = "yes" ; then + AC_MSG_ERROR([Windows/CE and GCC builds incompatible]) + fi + TEA_PATH_CELIB + # Set defaults for common evc4/PPC2003 setup + # Currently Tcl requires 300+, possibly 420+ for sockets + CEVERSION=420; # could be 211 300 301 400 420 ... + TARGETCPU=ARMV4; # could be ARMV4 ARM MIPS SH3 X86 ... + ARCH=ARM; # could be ARM MIPS X86EM ... + PLATFORM="Pocket PC 2003"; # or "Pocket PC 2002" + if test "$doWince" != "yes"; then + # If !yes then the user specified something + # Reset ARCH to allow user to skip specifying it + ARCH= + eval `echo $doWince | awk -F, '{ \ + if (length([$]1)) { printf "CEVERSION=\"%s\"\n", [$]1; \ + if ([$]1 < 400) { printf "PLATFORM=\"Pocket PC 2002\"\n" } }; \ + if (length([$]2)) { printf "TARGETCPU=\"%s\"\n", toupper([$]2) }; \ + if (length([$]3)) { printf "ARCH=\"%s\"\n", toupper([$]3) }; \ + if (length([$]4)) { printf "PLATFORM=\"%s\"\n", [$]4 }; \ + }'` + if test "x${ARCH}" = "x" ; then + ARCH=$TARGETCPU; + fi + fi + OSVERSION=WCE$CEVERSION; + if test "x${WCEROOT}" = "x" ; then + WCEROOT="C:/Program Files/Microsoft eMbedded C++ 4.0" + if test ! -d "${WCEROOT}" ; then + WCEROOT="C:/Program Files/Microsoft eMbedded Tools" + fi + fi + if test "x${SDKROOT}" = "x" ; then + SDKROOT="C:/Program Files/Windows CE Tools" + if test ! -d "${SDKROOT}" ; then + SDKROOT="C:/Windows CE Tools" + fi + fi + WCEROOT=`echo "$WCEROOT" | sed -e 's!\\\!/!g'` + SDKROOT=`echo "$SDKROOT" | sed -e 's!\\\!/!g'` + if test ! -d "${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" \ + -o ! -d "${WCEROOT}/EVC/${OSVERSION}/bin"; then + AC_MSG_ERROR([could not find PocketPC SDK or target compiler to enable WinCE mode [$CEVERSION,$TARGETCPU,$ARCH,$PLATFORM]]) + doWince="no" + else + # We could PATH_NOSPACE these, but that's not important, + # as long as we quote them when used. + CEINCLUDE="${SDKROOT}/${OSVERSION}/${PLATFORM}/include" + if test -d "${CEINCLUDE}/${TARGETCPU}" ; then + CEINCLUDE="${CEINCLUDE}/${TARGETCPU}" + fi + CELIBPATH="${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" + fi + fi + + if test "$GCC" != "yes" ; then + if test "${SHARED_BUILD}" = "0" ; then + runtime=-MT + else + runtime=-MD + fi + + if test "$do64bit" != "no" ; then + # All this magic is necessary for the Win64 SDK RC1 - hobbs + CC="\"${PATH64}/cl.exe\"" + CFLAGS="${CFLAGS} -I\"${MSSDK}/Include\" -I\"${MSSDK}/Include/crt\" -I\"${MSSDK}/Include/crt/sys\"" + RC="\"${MSSDK}/bin/rc.exe\"" + lflags="-nologo -MACHINE:${MACHINE} -LIBPATH:\"${MSSDK}/Lib/${MACHINE}\"" + LINKBIN="\"${PATH64}/link.exe\"" + CFLAGS_DEBUG="-nologo -Zi -Od -W3 ${runtime}d" + CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}" + # Avoid 'unresolved external symbol __security_cookie' + # errors, c.f. http://support.microsoft.com/?id=894573 + TEA_ADD_LIBS([bufferoverflowU.lib]) + elif test "$doWince" != "no" ; then + CEBINROOT="${WCEROOT}/EVC/${OSVERSION}/bin" + if test "${TARGETCPU}" = "X86"; then + CC="\"${CEBINROOT}/cl.exe\"" + else + CC="\"${CEBINROOT}/cl${ARCH}.exe\"" + fi + CFLAGS="$CFLAGS -I\"${CELIB_DIR}/inc\" -I\"${CEINCLUDE}\"" + RC="\"${WCEROOT}/Common/EVC/bin/rc.exe\"" + arch=`echo ${ARCH} | awk '{print tolower([$]0)}'` + defs="${ARCH} _${ARCH}_ ${arch} PALM_SIZE _MT _WINDOWS" + if test "${SHARED_BUILD}" = "1" ; then + # Static CE builds require static celib as well + defs="${defs} _DLL" + fi + for i in $defs ; do + AC_DEFINE_UNQUOTED($i, 1, [WinCE def ]$i) + done + AC_DEFINE_UNQUOTED(_WIN32_WCE, $CEVERSION, [_WIN32_WCE version]) + AC_DEFINE_UNQUOTED(UNDER_CE, $CEVERSION, [UNDER_CE version]) + CFLAGS_DEBUG="-nologo -Zi -Od" + CFLAGS_OPTIMIZE="-nologo -Ox" + lversion=`echo ${CEVERSION} | sed -e 's/\(.\)\(..\)/\1\.\2/'` + lflags="-MACHINE:${ARCH} -LIBPATH:\"${CELIBPATH}\" -subsystem:windowsce,${lversion} -nologo" + LINKBIN="\"${CEBINROOT}/link.exe\"" + AC_SUBST(CELIB_DIR) + else + RC="rc" + lflags="-nologo" + LINKBIN="link" + CFLAGS_DEBUG="-nologo -Z7 -Od -W3 -WX ${runtime}d" + CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}" + fi + fi + + if test "$GCC" = "yes"; then + # mingw gcc mode + AC_CHECK_TOOL(RC, windres) + CFLAGS_DEBUG="-g" + CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer" + SHLIB_LD='${CC} -shared' + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' + LDFLAGS_CONSOLE="-wl,--subsystem,console ${lflags}" + LDFLAGS_WINDOW="-wl,--subsystem,windows ${lflags}" + + AC_CACHE_CHECK(for cross-compile version of gcc, + ac_cv_cross, + AC_TRY_COMPILE([ + #ifdef __WIN32__ + #error cross-compiler + #endif + ], [], + ac_cv_cross=yes, + ac_cv_cross=no) + ) + if test "$ac_cv_cross" = "yes"; then + case "$do64bit" in + amd64|x64|yes) + CC="x86_64-w64-mingw32-gcc" + LD="x86_64-w64-mingw32-ld" + AR="x86_64-w64-mingw32-ar" + RANLIB="x86_64-w64-mingw32-ranlib" + RC="x86_64-w64-mingw32-windres" + ;; + *) + CC="i686-w64-mingw32-gcc" + LD="i686-w64-mingw32-ld" + AR="i686-w64-mingw32-ar" + RANLIB="i686-w64-mingw32-ranlib" + RC="i686-w64-mingw32-windres" + ;; + esac + fi + + else + SHLIB_LD="${LINKBIN} -dll ${lflags}" + # link -lib only works when -lib is the first arg + STLIB_LD="${LINKBIN} -lib ${lflags}" + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.lib' + PATHTYPE=-w + # For information on what debugtype is most useful, see: + # http://msdn.microsoft.com/library/en-us/dnvc60/html/gendepdebug.asp + # and also + # http://msdn2.microsoft.com/en-us/library/y0zzbyt4%28VS.80%29.aspx + # This essentially turns it all on. + LDFLAGS_DEBUG="-debug -debugtype:cv" + LDFLAGS_OPTIMIZE="-release" + if test "$doWince" != "no" ; then + LDFLAGS_CONSOLE="-link ${lflags}" + LDFLAGS_WINDOW=${LDFLAGS_CONSOLE} + else + LDFLAGS_CONSOLE="-link -subsystem:console ${lflags}" + LDFLAGS_WINDOW="-link -subsystem:windows ${lflags}" + fi + fi + + SHLIB_SUFFIX=".dll" + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.dll' + + TCL_LIB_VERSIONS_OK=nodots + ;; + AIX-*) + AS_IF([test "${TCL_THREADS}" = "1" -a "$GCC" != "yes"], [ + # AIX requires the _r compiler when gcc isn't being used + case "${CC}" in + *_r|*_r\ *) + # ok ... + ;; + *) + # Make sure only first arg gets _r + CC=`echo "$CC" | sed -e 's/^\([[^ ]]*\)/\1_r/'` + ;; + esac + AC_MSG_RESULT([Using $CC for compiling with threads]) + ]) + LIBS="$LIBS -lc" + SHLIB_CFLAGS="" + SHLIB_SUFFIX=".so" + + LD_LIBRARY_PATH_VAR="LIBPATH" + + # Check to enable 64-bit flags for compiler/linker + AS_IF([test "$do64bit" = yes], [ + AS_IF([test "$GCC" = yes], [ + AC_MSG_WARN([64bit mode not supported with GCC on $system]) + ], [ + do64bit_ok=yes + CFLAGS="$CFLAGS -q64" + LDFLAGS_ARCH="-q64" + RANLIB="${RANLIB} -X64" + AR="${AR} -X64" + SHLIB_LD_FLAGS="-b64" + ]) + ]) + + AS_IF([test "`uname -m`" = ia64], [ + # AIX-5 uses ELF style dynamic libraries on IA-64, but not PPC + SHLIB_LD="/usr/ccs/bin/ld -G -z text" + AS_IF([test "$GCC" = yes], [ + CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + ], [ + CC_SEARCH_FLAGS='-R${LIB_RUNTIME_DIR}' + ]) + LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' + ], [ + AS_IF([test "$GCC" = yes], [ + SHLIB_LD='${CC} -shared -Wl,-bexpall' + ], [ + SHLIB_LD="/bin/ld -bhalt:4 -bM:SRE -bexpall -H512 -T512 -bnoentry" + LDFLAGS="$LDFLAGS -brtl" + ]) + SHLIB_LD="${SHLIB_LD} ${SHLIB_LD_FLAGS}" + CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + ]) + ;; + BeOS*) + SHLIB_CFLAGS="-fPIC" + SHLIB_LD='${CC} -nostart' + SHLIB_SUFFIX=".so" + + #----------------------------------------------------------- + # Check for inet_ntoa in -lbind, for BeOS (which also needs + # -lsocket, even if the network functions are in -lnet which + # is always linked to, for compatibility. + #----------------------------------------------------------- + AC_CHECK_LIB(bind, inet_ntoa, [LIBS="$LIBS -lbind -lsocket"]) + ;; + BSD/OS-4.*) + SHLIB_CFLAGS="-export-dynamic -fPIC" + SHLIB_LD='${CC} -shared' + SHLIB_SUFFIX=".so" + LDFLAGS="$LDFLAGS -export-dynamic" + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + CYGWIN_*) + SHLIB_CFLAGS="" + SHLIB_LD='${CC} -shared' + SHLIB_SUFFIX=".dll" + EXEEXT=".exe" + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + Haiku*) + LDFLAGS="$LDFLAGS -Wl,--export-dynamic" + SHLIB_CFLAGS="-fPIC" + SHLIB_SUFFIX=".so" + SHLIB_LD='${CC} -shared ${CFLAGS} ${LDFLAGS}' + AC_CHECK_LIB(network, inet_ntoa, [LIBS="$LIBS -lnetwork"]) + ;; + HP-UX-*.11.*) + # Use updated header definitions where possible + AC_DEFINE(_XOPEN_SOURCE_EXTENDED, 1, [Do we want to use the XOPEN network library?]) + # TEA specific: Needed by Tcl, but not most extensions + #AC_DEFINE(_XOPEN_SOURCE, 1, [Do we want to use the XOPEN network library?]) + #LIBS="$LIBS -lxnet" # Use the XOPEN network library + + AS_IF([test "`uname -m`" = ia64], [ + SHLIB_SUFFIX=".so" + # Use newer C++ library for C++ extensions + #if test "$GCC" != "yes" ; then + # CPPFLAGS="-AA" + #fi + ], [ + SHLIB_SUFFIX=".sl" + ]) + AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no) + AS_IF([test "$tcl_ok" = yes], [ + LDFLAGS="$LDFLAGS -Wl,-E" + CC_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.' + LD_SEARCH_FLAGS='+s +b ${LIB_RUNTIME_DIR}:.' + LD_LIBRARY_PATH_VAR="SHLIB_PATH" + ]) + AS_IF([test "$GCC" = yes], [ + SHLIB_LD='${CC} -shared' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + ], [ + CFLAGS="$CFLAGS -z" + # Users may want PA-RISC 1.1/2.0 portable code - needs HP cc + #CFLAGS="$CFLAGS +DAportable" + SHLIB_CFLAGS="+z" + SHLIB_LD="ld -b" + ]) + + # Check to enable 64-bit flags for compiler/linker + AS_IF([test "$do64bit" = "yes"], [ + AS_IF([test "$GCC" = yes], [ + case `${CC} -dumpmachine` in + hppa64*) + # 64-bit gcc in use. Fix flags for GNU ld. + do64bit_ok=yes + SHLIB_LD='${CC} -shared' + AS_IF([test $doRpath = yes], [ + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + ;; + *) + AC_MSG_WARN([64bit mode not supported with GCC on $system]) + ;; + esac + ], [ + do64bit_ok=yes + CFLAGS="$CFLAGS +DD64" + LDFLAGS_ARCH="+DD64" + ]) + ]) ;; + IRIX-6.*) + SHLIB_CFLAGS="" + SHLIB_LD="ld -n32 -shared -rdata_shared" + SHLIB_SUFFIX=".so" + AS_IF([test $doRpath = yes], [ + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}']) + AS_IF([test "$GCC" = yes], [ + CFLAGS="$CFLAGS -mabi=n32" + LDFLAGS="$LDFLAGS -mabi=n32" + ], [ + case $system in + IRIX-6.3) + # Use to build 6.2 compatible binaries on 6.3. + CFLAGS="$CFLAGS -n32 -D_OLD_TERMIOS" + ;; + *) + CFLAGS="$CFLAGS -n32" + ;; + esac + LDFLAGS="$LDFLAGS -n32" + ]) + ;; + IRIX64-6.*) + SHLIB_CFLAGS="" + SHLIB_LD="ld -n32 -shared -rdata_shared" + SHLIB_SUFFIX=".so" + AS_IF([test $doRpath = yes], [ + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}']) + + # Check to enable 64-bit flags for compiler/linker + + AS_IF([test "$do64bit" = yes], [ + AS_IF([test "$GCC" = yes], [ + AC_MSG_WARN([64bit mode not supported by gcc]) + ], [ + do64bit_ok=yes + SHLIB_LD="ld -64 -shared -rdata_shared" + CFLAGS="$CFLAGS -64" + LDFLAGS_ARCH="-64" + ]) + ]) + ;; + Linux*|GNU*|NetBSD-Debian) + SHLIB_CFLAGS="-fPIC" + SHLIB_SUFFIX=".so" + + # TEA specific: + CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer" + + # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS + SHLIB_LD='${CC} -shared ${CFLAGS} ${LDFLAGS_DEFAULT}' + LDFLAGS="$LDFLAGS -Wl,--export-dynamic" + AS_IF([test $doRpath = yes], [ + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + AS_IF([test "`uname -m`" = "alpha"], [CFLAGS="$CFLAGS -mieee"]) + AS_IF([test $do64bit = yes], [ + AC_CACHE_CHECK([if compiler accepts -m64 flag], tcl_cv_cc_m64, [ + hold_cflags=$CFLAGS + CFLAGS="$CFLAGS -m64" + AC_TRY_LINK(,, tcl_cv_cc_m64=yes, tcl_cv_cc_m64=no) + CFLAGS=$hold_cflags]) + AS_IF([test $tcl_cv_cc_m64 = yes], [ + CFLAGS="$CFLAGS -m64" + do64bit_ok=yes + ]) + ]) + + # The combo of gcc + glibc has a bug related to inlining of + # functions like strtod(). The -fno-builtin flag should address + # this problem but it does not work. The -fno-inline flag is kind + # of overkill but it works. Disable inlining only when one of the + # files in compat/*.c is being linked in. + + AS_IF([test x"${USE_COMPAT}" != x],[CFLAGS="$CFLAGS -fno-inline"]) + ;; + Lynx*) + SHLIB_CFLAGS="-fPIC" + SHLIB_SUFFIX=".so" + CFLAGS_OPTIMIZE=-02 + SHLIB_LD='${CC} -shared' + LD_FLAGS="-Wl,--export-dynamic" + AS_IF([test $doRpath = yes], [ + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) + ;; + OpenBSD-*) + arch=`arch -s` + case "$arch" in + vax) + SHLIB_SUFFIX="" + SHARED_LIB_SUFFIX="" + LDFLAGS="" + ;; + *) + SHLIB_CFLAGS="-fPIC" + SHLIB_LD='${CC} -shared ${SHLIB_CFLAGS}' + SHLIB_SUFFIX=".so" + AS_IF([test $doRpath = yes], [ + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so.${SHLIB_VERSION}' + LDFLAGS="-Wl,-export-dynamic" + ;; + esac + case "$arch" in + vax) + CFLAGS_OPTIMIZE="-O1" + ;; + *) + CFLAGS_OPTIMIZE="-O2" + ;; + esac + AS_IF([test "${TCL_THREADS}" = "1"], [ + # On OpenBSD: Compile with -pthread + # Don't link with -lpthread + LIBS=`echo $LIBS | sed s/-lpthread//` + CFLAGS="$CFLAGS -pthread" + ]) + # OpenBSD doesn't do version numbers with dots. + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' + TCL_LIB_VERSIONS_OK=nodots + ;; + NetBSD-*) + # NetBSD has ELF and can use 'cc -shared' to build shared libs + SHLIB_CFLAGS="-fPIC" + SHLIB_LD='${CC} -shared ${SHLIB_CFLAGS}' + SHLIB_SUFFIX=".so" + LDFLAGS="$LDFLAGS -export-dynamic" + AS_IF([test $doRpath = yes], [ + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + AS_IF([test "${TCL_THREADS}" = "1"], [ + # The -pthread needs to go in the CFLAGS, not LIBS + LIBS=`echo $LIBS | sed s/-pthread//` + CFLAGS="$CFLAGS -pthread" + LDFLAGS="$LDFLAGS -pthread" + ]) + ;; + FreeBSD-*) + # This configuration from FreeBSD Ports. + SHLIB_CFLAGS="-fPIC" + SHLIB_LD="${CC} -shared" + TCL_SHLIB_LD_EXTRAS="-Wl,-soname=\$[@]" + SHLIB_SUFFIX=".so" + LDFLAGS="" + AS_IF([test $doRpath = yes], [ + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) + AS_IF([test "${TCL_THREADS}" = "1"], [ + # The -pthread needs to go in the LDFLAGS, not LIBS + LIBS=`echo $LIBS | sed s/-pthread//` + CFLAGS="$CFLAGS $PTHREAD_CFLAGS" + LDFLAGS="$LDFLAGS $PTHREAD_LIBS"]) + # Version numbers are dot-stripped by system policy. + TCL_TRIM_DOTS=`echo ${PACKAGE_VERSION} | tr -d .` + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1' + TCL_LIB_VERSIONS_OK=nodots + ;; + Darwin-*) + CFLAGS_OPTIMIZE="-Os" + SHLIB_CFLAGS="-fno-common" + # To avoid discrepancies between what headers configure sees during + # preprocessing tests and compiling tests, move any -isysroot and + # -mmacosx-version-min flags from CFLAGS to CPPFLAGS: + CPPFLAGS="${CPPFLAGS} `echo " ${CFLAGS}" | \ + awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \ + if ([$]i~/^(isysroot|mmacosx-version-min)/) print "-"[$]i}'`" + CFLAGS="`echo " ${CFLAGS}" | \ + awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \ + if (!([$]i~/^(isysroot|mmacosx-version-min)/)) print "-"[$]i}'`" + AS_IF([test $do64bit = yes], [ + case `arch` in + ppc) + AC_CACHE_CHECK([if compiler accepts -arch ppc64 flag], + tcl_cv_cc_arch_ppc64, [ + hold_cflags=$CFLAGS + CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5" + AC_TRY_LINK(,, tcl_cv_cc_arch_ppc64=yes, + tcl_cv_cc_arch_ppc64=no) + CFLAGS=$hold_cflags]) + AS_IF([test $tcl_cv_cc_arch_ppc64 = yes], [ + CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5" + do64bit_ok=yes + ]);; + i386) + AC_CACHE_CHECK([if compiler accepts -arch x86_64 flag], + tcl_cv_cc_arch_x86_64, [ + hold_cflags=$CFLAGS + CFLAGS="$CFLAGS -arch x86_64" + AC_TRY_LINK(,, tcl_cv_cc_arch_x86_64=yes, + tcl_cv_cc_arch_x86_64=no) + CFLAGS=$hold_cflags]) + AS_IF([test $tcl_cv_cc_arch_x86_64 = yes], [ + CFLAGS="$CFLAGS -arch x86_64" + do64bit_ok=yes + ]);; + *) + AC_MSG_WARN([Don't know how enable 64-bit on architecture `arch`]);; + esac + ], [ + # Check for combined 32-bit and 64-bit fat build + AS_IF([echo "$CFLAGS " |grep -E -q -- '-arch (ppc64|x86_64) ' \ + && echo "$CFLAGS " |grep -E -q -- '-arch (ppc|i386) '], [ + fat_32_64=yes]) + ]) + # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS + SHLIB_LD='${CC} -dynamiclib ${CFLAGS} ${LDFLAGS_DEFAULT}' + AC_CACHE_CHECK([if ld accepts -single_module flag], tcl_cv_ld_single_module, [ + hold_ldflags=$LDFLAGS + LDFLAGS="$LDFLAGS -dynamiclib -Wl,-single_module" + AC_TRY_LINK(, [int i;], tcl_cv_ld_single_module=yes, tcl_cv_ld_single_module=no) + LDFLAGS=$hold_ldflags]) + AS_IF([test $tcl_cv_ld_single_module = yes], [ + SHLIB_LD="${SHLIB_LD} -Wl,-single_module" + ]) + # TEA specific: link shlib with current and compatibility version flags + vers=`echo ${PACKAGE_VERSION} | sed -e 's/^\([[0-9]]\{1,5\}\)\(\(\.[[0-9]]\{1,3\}\)\{0,2\}\).*$/\1\2/p' -e d` + SHLIB_LD="${SHLIB_LD} -current_version ${vers:-0} -compatibility_version ${vers:-0}" + SHLIB_SUFFIX=".dylib" + # Don't use -prebind when building for Mac OS X 10.4 or later only: + AS_IF([test "`echo "${MACOSX_DEPLOYMENT_TARGET}" | awk -F '10\\.' '{print int([$]2)}'`" -lt 4 -a \ + "`echo "${CPPFLAGS}" | awk -F '-mmacosx-version-min=10\\.' '{print int([$]2)}'`" -lt 4], [ + LDFLAGS="$LDFLAGS -prebind"]) + LDFLAGS="$LDFLAGS -headerpad_max_install_names" + AC_CACHE_CHECK([if ld accepts -search_paths_first flag], + tcl_cv_ld_search_paths_first, [ + hold_ldflags=$LDFLAGS + LDFLAGS="$LDFLAGS -Wl,-search_paths_first" + AC_TRY_LINK(, [int i;], tcl_cv_ld_search_paths_first=yes, + tcl_cv_ld_search_paths_first=no) + LDFLAGS=$hold_ldflags]) + AS_IF([test $tcl_cv_ld_search_paths_first = yes], [ + LDFLAGS="$LDFLAGS -Wl,-search_paths_first" + ]) + AS_IF([test "$tcl_cv_cc_visibility_hidden" != yes], [ + AC_DEFINE(MODULE_SCOPE, [__private_extern__], + [Compiler support for module scope symbols]) + tcl_cv_cc_visibility_hidden=yes + ]) + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + LD_LIBRARY_PATH_VAR="DYLD_LIBRARY_PATH" + # TEA specific: for combined 32 & 64 bit fat builds of Tk + # extensions, verify that 64-bit build is possible. + AS_IF([test "$fat_32_64" = yes && test -n "${TK_BIN_DIR}"], [ + AS_IF([test "${TEA_WINDOWINGSYSTEM}" = x11], [ + AC_CACHE_CHECK([for 64-bit X11], tcl_cv_lib_x11_64, [ + for v in CFLAGS CPPFLAGS LDFLAGS; do + eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc / /g" -e "s/-arch i386 / /g"`"' + done + CPPFLAGS="$CPPFLAGS -I/usr/X11R6/include" + LDFLAGS="$LDFLAGS -L/usr/X11R6/lib -lX11" + AC_TRY_LINK([#include ], [XrmInitialize();], + tcl_cv_lib_x11_64=yes, tcl_cv_lib_x11_64=no) + for v in CFLAGS CPPFLAGS LDFLAGS; do + eval $v'="$hold_'$v'"' + done]) + ]) + AS_IF([test "${TEA_WINDOWINGSYSTEM}" = aqua], [ + AC_CACHE_CHECK([for 64-bit Tk], tcl_cv_lib_tk_64, [ + for v in CFLAGS CPPFLAGS LDFLAGS; do + eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc / /g" -e "s/-arch i386 / /g"`"' + done + CPPFLAGS="$CPPFLAGS -DUSE_TCL_STUBS=1 -DUSE_TK_STUBS=1 ${TCL_INCLUDES} ${TK_INCLUDES}" + LDFLAGS="$LDFLAGS ${TCL_STUB_LIB_SPEC} ${TK_STUB_LIB_SPEC}" + AC_TRY_LINK([#include ], [Tk_InitStubs(NULL, "", 0);], + tcl_cv_lib_tk_64=yes, tcl_cv_lib_tk_64=no) + for v in CFLAGS CPPFLAGS LDFLAGS; do + eval $v'="$hold_'$v'"' + done]) + ]) + # remove 64-bit arch flags from CFLAGS et al. if configuration + # does not support 64-bit. + AS_IF([test "$tcl_cv_lib_tk_64" = no -o "$tcl_cv_lib_x11_64" = no], [ + AC_MSG_NOTICE([Removing 64-bit architectures from compiler & linker flags]) + for v in CFLAGS CPPFLAGS LDFLAGS; do + eval $v'="`echo "$'$v' "|sed -e "s/-arch ppc64 / /g" -e "s/-arch x86_64 / /g"`"' + done]) + ]) + ;; + OS/390-*) + CFLAGS_OPTIMIZE="" # Optimizer is buggy + AC_DEFINE(_OE_SOCKETS, 1, # needed in sys/socket.h + [Should OS/390 do the right thing with sockets?]) + ;; + OSF1-V*) + # Digital OSF/1 + SHLIB_CFLAGS="" + AS_IF([test "$SHARED_BUILD" = 1], [ + SHLIB_LD='ld -shared -expect_unresolved "*"' + ], [ + SHLIB_LD='ld -non_shared -expect_unresolved "*"' + ]) + SHLIB_SUFFIX=".so" + AS_IF([test $doRpath = yes], [ + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}']) + AS_IF([test "$GCC" = yes], [CFLAGS="$CFLAGS -mieee"], [ + CFLAGS="$CFLAGS -DHAVE_TZSET -std1 -ieee"]) + # see pthread_intro(3) for pthread support on osf1, k.furukawa + AS_IF([test "${TCL_THREADS}" = 1], [ + CFLAGS="$CFLAGS -DHAVE_PTHREAD_ATTR_SETSTACKSIZE" + CFLAGS="$CFLAGS -DTCL_THREAD_STACK_MIN=PTHREAD_STACK_MIN*64" + LIBS=`echo $LIBS | sed s/-lpthreads//` + AS_IF([test "$GCC" = yes], [ + LIBS="$LIBS -lpthread -lmach -lexc" + ], [ + CFLAGS="$CFLAGS -pthread" + LDFLAGS="$LDFLAGS -pthread" + ]) + ]) + ;; + QNX-6*) + # QNX RTP + # This may work for all QNX, but it was only reported for v6. + SHLIB_CFLAGS="-fPIC" + SHLIB_LD="ld -Bshareable -x" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + SCO_SV-3.2*) + AS_IF([test "$GCC" = yes], [ + SHLIB_CFLAGS="-fPIC -melf" + LDFLAGS="$LDFLAGS -melf -Wl,-Bexport" + ], [ + SHLIB_CFLAGS="-Kpic -belf" + LDFLAGS="$LDFLAGS -belf -Wl,-Bexport" + ]) + SHLIB_LD="ld -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + SunOS-5.[[0-6]]) + # Careful to not let 5.10+ fall into this case + + # Note: If _REENTRANT isn't defined, then Solaris + # won't define thread-safe library routines. + + AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?]) + AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1, + [Do we really want to follow the standard? Yes we do!]) + + SHLIB_CFLAGS="-KPIC" + SHLIB_SUFFIX=".so" + AS_IF([test "$GCC" = yes], [ + SHLIB_LD='${CC} -shared' + CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + ], [ + SHLIB_LD="/usr/ccs/bin/ld -G -z text" + CC_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + ]) + ;; + SunOS-5*) + # Note: If _REENTRANT isn't defined, then Solaris + # won't define thread-safe library routines. + + AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?]) + AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1, + [Do we really want to follow the standard? Yes we do!]) + + SHLIB_CFLAGS="-KPIC" + + # Check to enable 64-bit flags for compiler/linker + AS_IF([test "$do64bit" = yes], [ + arch=`isainfo` + AS_IF([test "$arch" = "sparcv9 sparc"], [ + AS_IF([test "$GCC" = yes], [ + AS_IF([test "`${CC} -dumpversion | awk -F. '{print [$]1}'`" -lt 3], [ + AC_MSG_WARN([64bit mode not supported with GCC < 3.2 on $system]) + ], [ + do64bit_ok=yes + CFLAGS="$CFLAGS -m64 -mcpu=v9" + LDFLAGS="$LDFLAGS -m64 -mcpu=v9" + SHLIB_CFLAGS="-fPIC" + ]) + ], [ + do64bit_ok=yes + AS_IF([test "$do64bitVIS" = yes], [ + CFLAGS="$CFLAGS -xarch=v9a" + LDFLAGS_ARCH="-xarch=v9a" + ], [ + CFLAGS="$CFLAGS -xarch=v9" + LDFLAGS_ARCH="-xarch=v9" + ]) + # Solaris 64 uses this as well + #LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH_64" + ]) + ], [AS_IF([test "$arch" = "amd64 i386"], [ + AS_IF([test "$GCC" = yes], [ + case $system in + SunOS-5.1[[1-9]]*|SunOS-5.[[2-9]][[0-9]]*) + do64bit_ok=yes + CFLAGS="$CFLAGS -m64" + LDFLAGS="$LDFLAGS -m64";; + *) + AC_MSG_WARN([64bit mode not supported with GCC on $system]);; + esac + ], [ + do64bit_ok=yes + case $system in + SunOS-5.1[[1-9]]*|SunOS-5.[[2-9]][[0-9]]*) + CFLAGS="$CFLAGS -m64" + LDFLAGS="$LDFLAGS -m64";; + *) + CFLAGS="$CFLAGS -xarch=amd64" + LDFLAGS="$LDFLAGS -xarch=amd64";; + esac + ]) + ], [AC_MSG_WARN([64bit mode not supported for $arch])])]) + ]) + + SHLIB_SUFFIX=".so" + AS_IF([test "$GCC" = yes], [ + SHLIB_LD='${CC} -shared' + CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + AS_IF([test "$do64bit_ok" = yes], [ + AS_IF([test "$arch" = "sparcv9 sparc"], [ + # We need to specify -static-libgcc or we need to + # add the path to the sparv9 libgcc. + # JH: static-libgcc is necessary for core Tcl, but may + # not be necessary for extensions. + SHLIB_LD="$SHLIB_LD -m64 -mcpu=v9 -static-libgcc" + # for finding sparcv9 libgcc, get the regular libgcc + # path, remove so name and append 'sparcv9' + #v9gcclibdir="`gcc -print-file-name=libgcc_s.so` | ..." + #CC_SEARCH_FLAGS="${CC_SEARCH_FLAGS},-R,$v9gcclibdir" + ], [AS_IF([test "$arch" = "amd64 i386"], [ + # JH: static-libgcc is necessary for core Tcl, but may + # not be necessary for extensions. + SHLIB_LD="$SHLIB_LD -m64 -static-libgcc" + ])]) + ]) + ], [ + case $system in + SunOS-5.[[1-9]][[0-9]]*) + # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS + SHLIB_LD='${CC} -G -z text ${LDFLAGS_DEFAULT}';; + *) + SHLIB_LD='/usr/ccs/bin/ld -G -z text';; + esac + CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' + ]) + ;; + UNIX_SV* | UnixWare-5*) + SHLIB_CFLAGS="-KPIC" + SHLIB_LD='${CC} -G' + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + # Some UNIX_SV* systems (unixware 1.1.2 for example) have linkers + # that don't grok the -Bexport option. Test that it does. + AC_CACHE_CHECK([for ld accepts -Bexport flag], tcl_cv_ld_Bexport, [ + hold_ldflags=$LDFLAGS + LDFLAGS="$LDFLAGS -Wl,-Bexport" + AC_TRY_LINK(, [int i;], tcl_cv_ld_Bexport=yes, tcl_cv_ld_Bexport=no) + LDFLAGS=$hold_ldflags]) + AS_IF([test $tcl_cv_ld_Bexport = yes], [ + LDFLAGS="$LDFLAGS -Wl,-Bexport" + ]) + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + esac + + AS_IF([test "$do64bit" = yes -a "$do64bit_ok" = no], [ + AC_MSG_WARN([64bit support being disabled -- don't know magic for this platform]) + ]) + +dnl # Add any CPPFLAGS set in the environment to our CFLAGS, but delay doing so +dnl # until the end of configure, as configure's compile and link tests use +dnl # both CPPFLAGS and CFLAGS (unlike our compile and link) but configure's +dnl # preprocessing tests use only CPPFLAGS. + AC_CONFIG_COMMANDS_PRE([CFLAGS="${CFLAGS} ${CPPFLAGS}"; CPPFLAGS=""]) + + # Add in the arch flags late to ensure it wasn't removed. + # Not necessary in TEA, but this is aligned with core + LDFLAGS="$LDFLAGS $LDFLAGS_ARCH" + + # If we're running gcc, then change the C flags for compiling shared + # libraries to the right flags for gcc, instead of those for the + # standard manufacturer compiler. + + AS_IF([test "$GCC" = yes], [ + case $system in + AIX-*) ;; + BSD/OS*) ;; + CYGWIN_*|MINGW32_*) ;; + IRIX*) ;; + NetBSD-*|FreeBSD-*|OpenBSD-*) ;; + Darwin-*) ;; + SCO_SV-3.2*) ;; + windows) ;; + *) SHLIB_CFLAGS="-fPIC" ;; + esac]) + + AS_IF([test "$tcl_cv_cc_visibility_hidden" != yes], [ + AC_DEFINE(MODULE_SCOPE, [extern], + [No Compiler support for module scope symbols]) + ]) + + AS_IF([test "$SHARED_LIB_SUFFIX" = ""], [ + # TEA specific: use PACKAGE_VERSION instead of VERSION + SHARED_LIB_SUFFIX='${PACKAGE_VERSION}${SHLIB_SUFFIX}']) + AS_IF([test "$UNSHARED_LIB_SUFFIX" = ""], [ + # TEA specific: use PACKAGE_VERSION instead of VERSION + UNSHARED_LIB_SUFFIX='${PACKAGE_VERSION}.a']) + + if test "${GCC}" = "yes" -a ${SHLIB_SUFFIX} = ".dll"; then + AC_CACHE_CHECK(for SEH support in compiler, + tcl_cv_seh, + AC_TRY_RUN([ +#define WIN32_LEAN_AND_MEAN +#include +#undef WIN32_LEAN_AND_MEAN + + int main(int argc, char** argv) { + int a, b = 0; + __try { + a = 666 / b; + } + __except (EXCEPTION_EXECUTE_HANDLER) { + return 0; + } + return 1; + } + ], + tcl_cv_seh=yes, + tcl_cv_seh=no, + tcl_cv_seh=no) + ) + if test "$tcl_cv_seh" = "no" ; then + AC_DEFINE(HAVE_NO_SEH, 1, + [Defined when mingw does not support SEH]) + fi + + # + # Check to see if the excpt.h include file provided contains the + # definition for EXCEPTION_DISPOSITION; if not, which is the case + # with Cygwin's version as of 2002-04-10, define it to be int, + # sufficient for getting the current code to work. + # + AC_CACHE_CHECK(for EXCEPTION_DISPOSITION support in include files, + tcl_cv_eh_disposition, + AC_TRY_COMPILE([ +# define WIN32_LEAN_AND_MEAN +# include +# undef WIN32_LEAN_AND_MEAN + ],[ + EXCEPTION_DISPOSITION x; + ], + tcl_cv_eh_disposition=yes, + tcl_cv_eh_disposition=no) + ) + if test "$tcl_cv_eh_disposition" = "no" ; then + AC_DEFINE(EXCEPTION_DISPOSITION, int, + [Defined when cygwin/mingw does not support EXCEPTION DISPOSITION]) + fi + + # Check to see if winnt.h defines CHAR, SHORT, and LONG + # even if VOID has already been #defined. The win32api + # used by mingw and cygwin is known to do this. + + AC_CACHE_CHECK(for winnt.h that ignores VOID define, + tcl_cv_winnt_ignore_void, + AC_TRY_COMPILE([ +#define VOID void +#define WIN32_LEAN_AND_MEAN +#include +#undef WIN32_LEAN_AND_MEAN + ], [ + CHAR c; + SHORT s; + LONG l; + ], + tcl_cv_winnt_ignore_void=yes, + tcl_cv_winnt_ignore_void=no) + ) + if test "$tcl_cv_winnt_ignore_void" = "yes" ; then + AC_DEFINE(HAVE_WINNT_IGNORE_VOID, 1, + [Defined when cygwin/mingw ignores VOID define in winnt.h]) + fi + fi + + # See if the compiler supports casting to a union type. + # This is used to stop gcc from printing a compiler + # warning when initializing a union member. + + AC_CACHE_CHECK(for cast to union support, + tcl_cv_cast_to_union, + AC_TRY_COMPILE([], + [ + union foo { int i; double d; }; + union foo f = (union foo) (int) 0; + ], + tcl_cv_cast_to_union=yes, + tcl_cv_cast_to_union=no) + ) + if test "$tcl_cv_cast_to_union" = "yes"; then + AC_DEFINE(HAVE_CAST_TO_UNION, 1, + [Defined when compiler supports casting to union type.]) + fi + + AC_SUBST(CFLAGS_DEBUG) + AC_SUBST(CFLAGS_OPTIMIZE) + AC_SUBST(CFLAGS_WARNING) + + AC_SUBST(STLIB_LD) + AC_SUBST(SHLIB_LD) + + AC_SUBST(SHLIB_LD_LIBS) + AC_SUBST(SHLIB_CFLAGS) + + AC_SUBST(LD_LIBRARY_PATH_VAR) + + # These must be called after we do the basic CFLAGS checks and + # verify any possible 64-bit or similar switches are necessary + TEA_TCL_EARLY_FLAGS + TEA_TCL_64BIT_FLAGS +]) + +#-------------------------------------------------------------------- +# TEA_SERIAL_PORT +# +# Determine which interface to use to talk to the serial port. +# Note that #include lines must begin in leftmost column for +# some compilers to recognize them as preprocessor directives, +# and some build environments have stdin not pointing at a +# pseudo-terminal (usually /dev/null instead.) +# +# Arguments: +# none +# +# Results: +# +# Defines only one of the following vars: +# HAVE_SYS_MODEM_H +# USE_TERMIOS +# USE_TERMIO +# USE_SGTTY +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_SERIAL_PORT], [ + AC_CHECK_HEADERS(sys/modem.h) + AC_CACHE_CHECK([termios vs. termio vs. sgtty], tcl_cv_api_serial, [ + AC_TRY_RUN([ +#include + +int main() { + struct termios t; + if (tcgetattr(0, &t) == 0) { + cfsetospeed(&t, 0); + t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB; + return 0; + } + return 1; +}], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no) + if test $tcl_cv_api_serial = no ; then + AC_TRY_RUN([ +#include + +int main() { + struct termio t; + if (ioctl(0, TCGETA, &t) == 0) { + t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB; + return 0; + } + return 1; +}], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no) + fi + if test $tcl_cv_api_serial = no ; then + AC_TRY_RUN([ +#include + +int main() { + struct sgttyb t; + if (ioctl(0, TIOCGETP, &t) == 0) { + t.sg_ospeed = 0; + t.sg_flags |= ODDP | EVENP | RAW; + return 0; + } + return 1; +}], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=no, tcl_cv_api_serial=no) + fi + if test $tcl_cv_api_serial = no ; then + AC_TRY_RUN([ +#include +#include + +int main() { + struct termios t; + if (tcgetattr(0, &t) == 0 + || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { + cfsetospeed(&t, 0); + t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB; + return 0; + } + return 1; +}], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no) + fi + if test $tcl_cv_api_serial = no; then + AC_TRY_RUN([ +#include +#include + +int main() { + struct termio t; + if (ioctl(0, TCGETA, &t) == 0 + || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { + t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB; + return 0; + } + return 1; + }], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no) + fi + if test $tcl_cv_api_serial = no; then + AC_TRY_RUN([ +#include +#include + +int main() { + struct sgttyb t; + if (ioctl(0, TIOCGETP, &t) == 0 + || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { + t.sg_ospeed = 0; + t.sg_flags |= ODDP | EVENP | RAW; + return 0; + } + return 1; +}], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=none, tcl_cv_api_serial=none) + fi]) + case $tcl_cv_api_serial in + termios) AC_DEFINE(USE_TERMIOS, 1, [Use the termios API for serial lines]);; + termio) AC_DEFINE(USE_TERMIO, 1, [Use the termio API for serial lines]);; + sgtty) AC_DEFINE(USE_SGTTY, 1, [Use the sgtty API for serial lines]);; + esac +]) + +#-------------------------------------------------------------------- +# TEA_MISSING_POSIX_HEADERS +# +# Supply substitutes for missing POSIX header files. Special +# notes: +# - stdlib.h doesn't define strtol, strtoul, or +# strtod in some versions of SunOS +# - some versions of string.h don't declare procedures such +# as strstr +# +# Arguments: +# none +# +# Results: +# +# Defines some of the following vars: +# NO_DIRENT_H +# NO_ERRNO_H +# NO_VALUES_H +# HAVE_LIMITS_H or NO_LIMITS_H +# NO_STDLIB_H +# NO_STRING_H +# NO_SYS_WAIT_H +# NO_DLFCN_H +# HAVE_SYS_PARAM_H +# +# HAVE_STRING_H ? +# +# tkUnixPort.h checks for HAVE_LIMITS_H, so do both HAVE and +# CHECK on limits.h +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_MISSING_POSIX_HEADERS], [ + AC_CACHE_CHECK([dirent.h], tcl_cv_dirent_h, [ + AC_TRY_LINK([#include +#include ], [ +#ifndef _POSIX_SOURCE +# ifdef __Lynx__ + /* + * Generate compilation error to make the test fail: Lynx headers + * are only valid if really in the POSIX environment. + */ + + missing_procedure(); +# endif +#endif +DIR *d; +struct dirent *entryPtr; +char *p; +d = opendir("foobar"); +entryPtr = readdir(d); +p = entryPtr->d_name; +closedir(d); +], tcl_cv_dirent_h=yes, tcl_cv_dirent_h=no)]) + + if test $tcl_cv_dirent_h = no; then + AC_DEFINE(NO_DIRENT_H, 1, [Do we have ?]) + fi + + # TEA specific: + AC_CHECK_HEADER(errno.h, , [AC_DEFINE(NO_ERRNO_H, 1, [Do we have ?])]) + AC_CHECK_HEADER(float.h, , [AC_DEFINE(NO_FLOAT_H, 1, [Do we have ?])]) + AC_CHECK_HEADER(values.h, , [AC_DEFINE(NO_VALUES_H, 1, [Do we have ?])]) + AC_CHECK_HEADER(limits.h, + [AC_DEFINE(HAVE_LIMITS_H, 1, [Do we have ?])], + [AC_DEFINE(NO_LIMITS_H, 1, [Do we have ?])]) + AC_CHECK_HEADER(stdlib.h, tcl_ok=1, tcl_ok=0) + AC_EGREP_HEADER(strtol, stdlib.h, , tcl_ok=0) + AC_EGREP_HEADER(strtoul, stdlib.h, , tcl_ok=0) + AC_EGREP_HEADER(strtod, stdlib.h, , tcl_ok=0) + if test $tcl_ok = 0; then + AC_DEFINE(NO_STDLIB_H, 1, [Do we have ?]) + fi + AC_CHECK_HEADER(string.h, tcl_ok=1, tcl_ok=0) + AC_EGREP_HEADER(strstr, string.h, , tcl_ok=0) + AC_EGREP_HEADER(strerror, string.h, , tcl_ok=0) + + # See also memmove check below for a place where NO_STRING_H can be + # set and why. + + if test $tcl_ok = 0; then + AC_DEFINE(NO_STRING_H, 1, [Do we have ?]) + fi + + AC_CHECK_HEADER(sys/wait.h, , [AC_DEFINE(NO_SYS_WAIT_H, 1, [Do we have ?])]) + AC_CHECK_HEADER(dlfcn.h, , [AC_DEFINE(NO_DLFCN_H, 1, [Do we have ?])]) + + # OS/390 lacks sys/param.h (and doesn't need it, by chance). + AC_HAVE_HEADERS(sys/param.h) +]) + +#-------------------------------------------------------------------- +# TEA_PATH_X +# +# Locate the X11 header files and the X11 library archive. Try +# the ac_path_x macro first, but if it doesn't find the X stuff +# (e.g. because there's no xmkmf program) then check through +# a list of possible directories. Under some conditions the +# autoconf macro will return an include directory that contains +# no include files, so double-check its result just to be safe. +# +# This should be called after TEA_CONFIG_CFLAGS as setting the +# LIBS line can confuse some configure macro magic. +# +# Arguments: +# none +# +# Results: +# +# Sets the following vars: +# XINCLUDES +# XLIBSW +# PKG_LIBS (appends to) +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_PATH_X], [ + if test "${TEA_WINDOWINGSYSTEM}" = "x11" ; then + TEA_PATH_UNIX_X + fi +]) + +AC_DEFUN([TEA_PATH_UNIX_X], [ + AC_PATH_X + not_really_there="" + if test "$no_x" = ""; then + if test "$x_includes" = ""; then + AC_TRY_CPP([#include ], , not_really_there="yes") + else + if test ! -r $x_includes/X11/Xlib.h; then + not_really_there="yes" + fi + fi + fi + if test "$no_x" = "yes" -o "$not_really_there" = "yes"; then + AC_MSG_CHECKING([for X11 header files]) + found_xincludes="no" + AC_TRY_CPP([#include ], found_xincludes="yes", found_xincludes="no") + if test "$found_xincludes" = "no"; then + dirs="/usr/unsupported/include /usr/local/include /usr/X386/include /usr/X11R6/include /usr/X11R5/include /usr/include/X11R5 /usr/include/X11R4 /usr/openwin/include /usr/X11/include /usr/sww/include" + for i in $dirs ; do + if test -r $i/X11/Xlib.h; then + AC_MSG_RESULT([$i]) + XINCLUDES=" -I$i" + found_xincludes="yes" + break + fi + done + fi + else + if test "$x_includes" != ""; then + XINCLUDES="-I$x_includes" + found_xincludes="yes" + fi + fi + if test "$found_xincludes" = "no"; then + AC_MSG_RESULT([couldn't find any!]) + fi + + if test "$no_x" = yes; then + AC_MSG_CHECKING([for X11 libraries]) + XLIBSW=nope + dirs="/usr/unsupported/lib /usr/local/lib /usr/X386/lib /usr/X11R6/lib /usr/X11R5/lib /usr/lib/X11R5 /usr/lib/X11R4 /usr/openwin/lib /usr/X11/lib /usr/sww/X11/lib" + for i in $dirs ; do + if test -r $i/libX11.a -o -r $i/libX11.so -o -r $i/libX11.sl -o -r $i/libX11.dylib; then + AC_MSG_RESULT([$i]) + XLIBSW="-L$i -lX11" + x_libraries="$i" + break + fi + done + else + if test "$x_libraries" = ""; then + XLIBSW=-lX11 + else + XLIBSW="-L$x_libraries -lX11" + fi + fi + if test "$XLIBSW" = nope ; then + AC_CHECK_LIB(Xwindow, XCreateWindow, XLIBSW=-lXwindow) + fi + if test "$XLIBSW" = nope ; then + AC_MSG_RESULT([could not find any! Using -lX11.]) + XLIBSW=-lX11 + fi + # TEA specific: + if test x"${XLIBSW}" != x ; then + PKG_LIBS="${PKG_LIBS} ${XLIBSW}" + fi +]) + +#-------------------------------------------------------------------- +# TEA_BLOCKING_STYLE +# +# The statements below check for systems where POSIX-style +# non-blocking I/O (O_NONBLOCK) doesn't work or is unimplemented. +# On these systems (mostly older ones), use the old BSD-style +# FIONBIO approach instead. +# +# Arguments: +# none +# +# Results: +# +# Defines some of the following vars: +# HAVE_SYS_IOCTL_H +# HAVE_SYS_FILIO_H +# USE_FIONBIO +# O_NONBLOCK +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_BLOCKING_STYLE], [ + AC_CHECK_HEADERS(sys/ioctl.h) + AC_CHECK_HEADERS(sys/filio.h) + TEA_CONFIG_SYSTEM + AC_MSG_CHECKING([FIONBIO vs. O_NONBLOCK for nonblocking I/O]) + case $system in + OSF*) + AC_DEFINE(USE_FIONBIO, 1, [Should we use FIONBIO?]) + AC_MSG_RESULT([FIONBIO]) + ;; + *) + AC_MSG_RESULT([O_NONBLOCK]) + ;; + esac +]) + +#-------------------------------------------------------------------- +# TEA_TIME_HANDLER +# +# Checks how the system deals with time.h, what time structures +# are used on the system, and what fields the structures have. +# +# Arguments: +# none +# +# Results: +# +# Defines some of the following vars: +# USE_DELTA_FOR_TZ +# HAVE_TM_GMTOFF +# HAVE_TM_TZADJ +# HAVE_TIMEZONE_VAR +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_TIME_HANDLER], [ + AC_CHECK_HEADERS(sys/time.h) + AC_HEADER_TIME + AC_STRUCT_TIMEZONE + + AC_CHECK_FUNCS(gmtime_r localtime_r) + + AC_CACHE_CHECK([tm_tzadj in struct tm], tcl_cv_member_tm_tzadj, [ + AC_TRY_COMPILE([#include ], [struct tm tm; tm.tm_tzadj;], + tcl_cv_member_tm_tzadj=yes, tcl_cv_member_tm_tzadj=no)]) + if test $tcl_cv_member_tm_tzadj = yes ; then + AC_DEFINE(HAVE_TM_TZADJ, 1, [Should we use the tm_tzadj field of struct tm?]) + fi + + AC_CACHE_CHECK([tm_gmtoff in struct tm], tcl_cv_member_tm_gmtoff, [ + AC_TRY_COMPILE([#include ], [struct tm tm; tm.tm_gmtoff;], + tcl_cv_member_tm_gmtoff=yes, tcl_cv_member_tm_gmtoff=no)]) + if test $tcl_cv_member_tm_gmtoff = yes ; then + AC_DEFINE(HAVE_TM_GMTOFF, 1, [Should we use the tm_gmtoff field of struct tm?]) + fi + + # + # Its important to include time.h in this check, as some systems + # (like convex) have timezone functions, etc. + # + AC_CACHE_CHECK([long timezone variable], tcl_cv_timezone_long, [ + AC_TRY_COMPILE([#include ], + [extern long timezone; + timezone += 1; + exit (0);], + tcl_cv_timezone_long=yes, tcl_cv_timezone_long=no)]) + if test $tcl_cv_timezone_long = yes ; then + AC_DEFINE(HAVE_TIMEZONE_VAR, 1, [Should we use the global timezone variable?]) + else + # + # On some systems (eg IRIX 6.2), timezone is a time_t and not a long. + # + AC_CACHE_CHECK([time_t timezone variable], tcl_cv_timezone_time, [ + AC_TRY_COMPILE([#include ], + [extern time_t timezone; + timezone += 1; + exit (0);], + tcl_cv_timezone_time=yes, tcl_cv_timezone_time=no)]) + if test $tcl_cv_timezone_time = yes ; then + AC_DEFINE(HAVE_TIMEZONE_VAR, 1, [Should we use the global timezone variable?]) + fi + fi +]) + +#-------------------------------------------------------------------- +# TEA_BUGGY_STRTOD +# +# Under Solaris 2.4, strtod returns the wrong value for the +# terminating character under some conditions. Check for this +# and if the problem exists use a substitute procedure +# "fixstrtod" (provided by Tcl) that corrects the error. +# Also, on Compaq's Tru64 Unix 5.0, +# strtod(" ") returns 0.0 instead of a failure to convert. +# +# Arguments: +# none +# +# Results: +# +# Might defines some of the following vars: +# strtod (=fixstrtod) +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_BUGGY_STRTOD], [ + AC_CHECK_FUNC(strtod, tcl_strtod=1, tcl_strtod=0) + if test "$tcl_strtod" = 1; then + AC_CACHE_CHECK([for Solaris2.4/Tru64 strtod bugs], tcl_cv_strtod_buggy,[ + AC_TRY_RUN([ + extern double strtod(); + int main() { + char *infString="Inf", *nanString="NaN", *spaceString=" "; + char *term; + double value; + value = strtod(infString, &term); + if ((term != infString) && (term[-1] == 0)) { + exit(1); + } + value = strtod(nanString, &term); + if ((term != nanString) && (term[-1] == 0)) { + exit(1); + } + value = strtod(spaceString, &term); + if (term == (spaceString+1)) { + exit(1); + } + exit(0); + }], tcl_cv_strtod_buggy=ok, tcl_cv_strtod_buggy=buggy, + tcl_cv_strtod_buggy=buggy)]) + if test "$tcl_cv_strtod_buggy" = buggy; then + AC_LIBOBJ([fixstrtod]) + USE_COMPAT=1 + AC_DEFINE(strtod, fixstrtod, [Do we want to use the strtod() in compat?]) + fi + fi +]) + +#-------------------------------------------------------------------- +# TEA_TCL_LINK_LIBS +# +# Search for the libraries needed to link the Tcl shell. +# Things like the math library (-lm) and socket stuff (-lsocket vs. +# -lnsl) are dealt with here. +# +# Arguments: +# Requires the following vars to be set in the Makefile: +# DL_LIBS (not in TEA, only needed in core) +# LIBS +# MATH_LIBS +# +# Results: +# +# Substitutes the following vars: +# TCL_LIBS +# MATH_LIBS +# +# Might append to the following vars: +# LIBS +# +# Might define the following vars: +# HAVE_NET_ERRNO_H +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_TCL_LINK_LIBS], [ + #-------------------------------------------------------------------- + # On a few very rare systems, all of the libm.a stuff is + # already in libc.a. Set compiler flags accordingly. + # Also, Linux requires the "ieee" library for math to work + # right (and it must appear before "-lm"). + #-------------------------------------------------------------------- + + AC_CHECK_FUNC(sin, MATH_LIBS="", MATH_LIBS="-lm") + AC_CHECK_LIB(ieee, main, [MATH_LIBS="-lieee $MATH_LIBS"]) + + #-------------------------------------------------------------------- + # Interactive UNIX requires -linet instead of -lsocket, plus it + # needs net/errno.h to define the socket-related error codes. + #-------------------------------------------------------------------- + + AC_CHECK_LIB(inet, main, [LIBS="$LIBS -linet"]) + AC_CHECK_HEADER(net/errno.h, [ + AC_DEFINE(HAVE_NET_ERRNO_H, 1, [Do we have ?])]) + + #-------------------------------------------------------------------- + # Check for the existence of the -lsocket and -lnsl libraries. + # The order here is important, so that they end up in the right + # order in the command line generated by make. Here are some + # special considerations: + # 1. Use "connect" and "accept" to check for -lsocket, and + # "gethostbyname" to check for -lnsl. + # 2. Use each function name only once: can't redo a check because + # autoconf caches the results of the last check and won't redo it. + # 3. Use -lnsl and -lsocket only if they supply procedures that + # aren't already present in the normal libraries. This is because + # IRIX 5.2 has libraries, but they aren't needed and they're + # bogus: they goof up name resolution if used. + # 4. On some SVR4 systems, can't use -lsocket without -lnsl too. + # To get around this problem, check for both libraries together + # if -lsocket doesn't work by itself. + #-------------------------------------------------------------------- + + tcl_checkBoth=0 + AC_CHECK_FUNC(connect, tcl_checkSocket=0, tcl_checkSocket=1) + if test "$tcl_checkSocket" = 1; then + AC_CHECK_FUNC(setsockopt, , [AC_CHECK_LIB(socket, setsockopt, + LIBS="$LIBS -lsocket", tcl_checkBoth=1)]) + fi + if test "$tcl_checkBoth" = 1; then + tk_oldLibs=$LIBS + LIBS="$LIBS -lsocket -lnsl" + AC_CHECK_FUNC(accept, tcl_checkNsl=0, [LIBS=$tk_oldLibs]) + fi + AC_CHECK_FUNC(gethostbyname, , [AC_CHECK_LIB(nsl, gethostbyname, + [LIBS="$LIBS -lnsl"])]) + + # TEA specific: Don't perform the eval of the libraries here because + # DL_LIBS won't be set until we call TEA_CONFIG_CFLAGS + + TCL_LIBS='${DL_LIBS} ${LIBS} ${MATH_LIBS}' + AC_SUBST(TCL_LIBS) + AC_SUBST(MATH_LIBS) +]) + +#-------------------------------------------------------------------- +# TEA_TCL_EARLY_FLAGS +# +# Check for what flags are needed to be passed so the correct OS +# features are available. +# +# Arguments: +# None +# +# Results: +# +# Might define the following vars: +# _ISOC99_SOURCE +# _LARGEFILE64_SOURCE +# _LARGEFILE_SOURCE64 +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_TCL_EARLY_FLAG],[ + AC_CACHE_VAL([tcl_cv_flag_]translit($1,[A-Z],[a-z]), + AC_TRY_COMPILE([$2], $3, [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no, + AC_TRY_COMPILE([[#define ]$1[ 1 +]$2], $3, + [tcl_cv_flag_]translit($1,[A-Z],[a-z])=yes, + [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no))) + if test ["x${tcl_cv_flag_]translit($1,[A-Z],[a-z])[}" = "xyes"] ; then + AC_DEFINE($1, 1, [Add the ]$1[ flag when building]) + tcl_flags="$tcl_flags $1" + fi +]) + +AC_DEFUN([TEA_TCL_EARLY_FLAGS],[ + AC_MSG_CHECKING([for required early compiler flags]) + tcl_flags="" + TEA_TCL_EARLY_FLAG(_ISOC99_SOURCE,[#include ], + [char *p = (char *)strtoll; char *q = (char *)strtoull;]) + TEA_TCL_EARLY_FLAG(_LARGEFILE64_SOURCE,[#include ], + [struct stat64 buf; int i = stat64("/", &buf);]) + TEA_TCL_EARLY_FLAG(_LARGEFILE_SOURCE64,[#include ], + [char *p = (char *)open64;]) + if test "x${tcl_flags}" = "x" ; then + AC_MSG_RESULT([none]) + else + AC_MSG_RESULT([${tcl_flags}]) + fi +]) + +#-------------------------------------------------------------------- +# TEA_TCL_64BIT_FLAGS +# +# Check for what is defined in the way of 64-bit features. +# +# Arguments: +# None +# +# Results: +# +# Might define the following vars: +# TCL_WIDE_INT_IS_LONG +# TCL_WIDE_INT_TYPE +# HAVE_STRUCT_DIRENT64 +# HAVE_STRUCT_STAT64 +# HAVE_TYPE_OFF64_T +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_TCL_64BIT_FLAGS], [ + AC_MSG_CHECKING([for 64-bit integer type]) + AC_CACHE_VAL(tcl_cv_type_64bit,[ + tcl_cv_type_64bit=none + # See if the compiler knows natively about __int64 + AC_TRY_COMPILE(,[__int64 value = (__int64) 0;], + tcl_type_64bit=__int64, tcl_type_64bit="long long") + # See if we should use long anyway Note that we substitute in the + # type that is our current guess for a 64-bit type inside this check + # program, so it should be modified only carefully... + AC_TRY_COMPILE(,[switch (0) { + case 1: case (sizeof(]${tcl_type_64bit}[)==sizeof(long)): ; + }],tcl_cv_type_64bit=${tcl_type_64bit})]) + if test "${tcl_cv_type_64bit}" = none ; then + AC_DEFINE(TCL_WIDE_INT_IS_LONG, 1, [Are wide integers to be implemented with C 'long's?]) + AC_MSG_RESULT([using long]) + elif test "${tcl_cv_type_64bit}" = "__int64" \ + -a "${TEA_PLATFORM}" = "windows" ; then + # TEA specific: We actually want to use the default tcl.h checks in + # this case to handle both TCL_WIDE_INT_TYPE and TCL_LL_MODIFIER* + AC_MSG_RESULT([using Tcl header defaults]) + else + AC_DEFINE_UNQUOTED(TCL_WIDE_INT_TYPE,${tcl_cv_type_64bit}, + [What type should be used to define wide integers?]) + AC_MSG_RESULT([${tcl_cv_type_64bit}]) + + # Now check for auxiliary declarations + AC_CACHE_CHECK([for struct dirent64], tcl_cv_struct_dirent64,[ + AC_TRY_COMPILE([#include +#include ],[struct dirent64 p;], + tcl_cv_struct_dirent64=yes,tcl_cv_struct_dirent64=no)]) + if test "x${tcl_cv_struct_dirent64}" = "xyes" ; then + AC_DEFINE(HAVE_STRUCT_DIRENT64, 1, [Is 'struct dirent64' in ?]) + fi + + AC_CACHE_CHECK([for struct stat64], tcl_cv_struct_stat64,[ + AC_TRY_COMPILE([#include ],[struct stat64 p; +], + tcl_cv_struct_stat64=yes,tcl_cv_struct_stat64=no)]) + if test "x${tcl_cv_struct_stat64}" = "xyes" ; then + AC_DEFINE(HAVE_STRUCT_STAT64, 1, [Is 'struct stat64' in ?]) + fi + + AC_CHECK_FUNCS(open64 lseek64) + AC_MSG_CHECKING([for off64_t]) + AC_CACHE_VAL(tcl_cv_type_off64_t,[ + AC_TRY_COMPILE([#include ],[off64_t offset; +], + tcl_cv_type_off64_t=yes,tcl_cv_type_off64_t=no)]) + dnl Define HAVE_TYPE_OFF64_T only when the off64_t type and the + dnl functions lseek64 and open64 are defined. + if test "x${tcl_cv_type_off64_t}" = "xyes" && \ + test "x${ac_cv_func_lseek64}" = "xyes" && \ + test "x${ac_cv_func_open64}" = "xyes" ; then + AC_DEFINE(HAVE_TYPE_OFF64_T, 1, [Is off64_t in ?]) + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + fi + fi +]) + +## +## Here ends the standard Tcl configuration bits and starts the +## TEA specific functions +## + +#------------------------------------------------------------------------ +# TEA_INIT -- +# +# Init various Tcl Extension Architecture (TEA) variables. +# This should be the first called TEA_* macro. +# +# Arguments: +# none +# +# Results: +# +# Defines and substs the following vars: +# CYGPATH +# EXEEXT +# Defines only: +# TEA_VERSION +# TEA_INITED +# TEA_PLATFORM (windows or unix) +# +# "cygpath" is used on windows to generate native path names for include +# files. These variables should only be used with the compiler and linker +# since they generate native path names. +# +# EXEEXT +# Select the executable extension based on the host type. This +# is a lightweight replacement for AC_EXEEXT that doesn't require +# a compiler. +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_INIT], [ + # TEA extensions pass this us the version of TEA they think they + # are compatible with. + TEA_VERSION="3.9" + + AC_MSG_CHECKING([for correct TEA configuration]) + if test x"${PACKAGE_NAME}" = x ; then + AC_MSG_ERROR([ +The PACKAGE_NAME variable must be defined by your TEA configure.in]) + fi + if test x"$1" = x ; then + AC_MSG_ERROR([ +TEA version not specified.]) + elif test "$1" != "${TEA_VERSION}" ; then + AC_MSG_RESULT([warning: requested TEA version "$1", have "${TEA_VERSION}"]) + else + AC_MSG_RESULT([ok (TEA ${TEA_VERSION})]) + fi + + # If the user did not set CFLAGS, set it now to keep macros + # like AC_PROG_CC and AC_TRY_COMPILE from adding "-g -O2". + if test "${CFLAGS+set}" != "set" ; then + CFLAGS="" + fi + + case "`uname -s`" in + *win32*|*WIN32*|*MINGW32_*) + AC_CHECK_PROG(CYGPATH, cygpath, cygpath -w, echo) + EXEEXT=".exe" + TEA_PLATFORM="windows" + ;; + *CYGWIN_*) + CYGPATH=echo + EXEEXT=".exe" + # TEA_PLATFORM is determined later in LOAD_TCLCONFIG + ;; + *) + CYGPATH=echo + # Maybe we are cross-compiling.... + case ${host_alias} in + *mingw32*) + EXEEXT=".exe" + TEA_PLATFORM="windows" + ;; + *) + EXEEXT="" + TEA_PLATFORM="unix" + ;; + esac + ;; + esac + + # Check if exec_prefix is set. If not use fall back to prefix. + # Note when adjusted, so that TEA_PREFIX can correct for this. + # This is needed for recursive configures, since autoconf propagates + # $prefix, but not $exec_prefix (doh!). + if test x$exec_prefix = xNONE ; then + exec_prefix_default=yes + exec_prefix=$prefix + fi + + AC_MSG_NOTICE([configuring ${PACKAGE_NAME} ${PACKAGE_VERSION}]) + + AC_SUBST(EXEEXT) + AC_SUBST(CYGPATH) + + # This package name must be replaced statically for AC_SUBST to work + AC_SUBST(PKG_LIB_FILE) + # Substitute STUB_LIB_FILE in case package creates a stub library too. + AC_SUBST(PKG_STUB_LIB_FILE) + + # We AC_SUBST these here to ensure they are subst'ed, + # in case the user doesn't call TEA_ADD_... + AC_SUBST(PKG_STUB_SOURCES) + AC_SUBST(PKG_STUB_OBJECTS) + AC_SUBST(PKG_TCL_SOURCES) + AC_SUBST(PKG_HEADERS) + AC_SUBST(PKG_INCLUDES) + AC_SUBST(PKG_LIBS) + AC_SUBST(PKG_CFLAGS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_SOURCES -- +# +# Specify one or more source files. Users should check for +# the right platform before adding to their list. +# It is not important to specify the directory, as long as it is +# in the generic, win or unix subdirectory of $(srcdir). +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_SOURCES +# PKG_OBJECTS +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_SOURCES], [ + vars="$@" + for i in $vars; do + case $i in + [\$]*) + # allow $-var names + PKG_SOURCES="$PKG_SOURCES $i" + PKG_OBJECTS="$PKG_OBJECTS $i" + ;; + *) + # check for existence - allows for generic/win/unix VPATH + # To add more dirs here (like 'src'), you have to update VPATH + # in Makefile.in as well + if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ + -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ + -a ! -f "${srcdir}/macosx/$i" \ + ; then + AC_MSG_ERROR([could not find source file '$i']) + fi + PKG_SOURCES="$PKG_SOURCES $i" + # this assumes it is in a VPATH dir + i=`basename $i` + # handle user calling this before or after TEA_SETUP_COMPILER + if test x"${OBJEXT}" != x ; then + j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}" + else + j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}" + fi + PKG_OBJECTS="$PKG_OBJECTS $j" + ;; + esac + done + AC_SUBST(PKG_SOURCES) + AC_SUBST(PKG_OBJECTS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_STUB_SOURCES -- +# +# Specify one or more source files. Users should check for +# the right platform before adding to their list. +# It is not important to specify the directory, as long as it is +# in the generic, win or unix subdirectory of $(srcdir). +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_STUB_SOURCES +# PKG_STUB_OBJECTS +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_STUB_SOURCES], [ + vars="$@" + for i in $vars; do + # check for existence - allows for generic/win/unix VPATH + if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ + -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ + -a ! -f "${srcdir}/macosx/$i" \ + ; then + AC_MSG_ERROR([could not find stub source file '$i']) + fi + PKG_STUB_SOURCES="$PKG_STUB_SOURCES $i" + # this assumes it is in a VPATH dir + i=`basename $i` + # handle user calling this before or after TEA_SETUP_COMPILER + if test x"${OBJEXT}" != x ; then + j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}" + else + j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}" + fi + PKG_STUB_OBJECTS="$PKG_STUB_OBJECTS $j" + done + AC_SUBST(PKG_STUB_SOURCES) + AC_SUBST(PKG_STUB_OBJECTS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_TCL_SOURCES -- +# +# Specify one or more Tcl source files. These should be platform +# independent runtime files. +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_TCL_SOURCES +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_TCL_SOURCES], [ + vars="$@" + for i in $vars; do + # check for existence, be strict because it is installed + if test ! -f "${srcdir}/$i" ; then + AC_MSG_ERROR([could not find tcl source file '${srcdir}/$i']) + fi + PKG_TCL_SOURCES="$PKG_TCL_SOURCES $i" + done + AC_SUBST(PKG_TCL_SOURCES) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_HEADERS -- +# +# Specify one or more source headers. Users should check for +# the right platform before adding to their list. +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_HEADERS +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_HEADERS], [ + vars="$@" + for i in $vars; do + # check for existence, be strict because it is installed + if test ! -f "${srcdir}/$i" ; then + AC_MSG_ERROR([could not find header file '${srcdir}/$i']) + fi + PKG_HEADERS="$PKG_HEADERS $i" + done + AC_SUBST(PKG_HEADERS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_INCLUDES -- +# +# Specify one or more include dirs. Users should check for +# the right platform before adding to their list. +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_INCLUDES +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_INCLUDES], [ + vars="$@" + for i in $vars; do + PKG_INCLUDES="$PKG_INCLUDES $i" + done + AC_SUBST(PKG_INCLUDES) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_LIBS -- +# +# Specify one or more libraries. Users should check for +# the right platform before adding to their list. For Windows, +# libraries provided in "foo.lib" format will be converted to +# "-lfoo" when using GCC (mingw). +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_LIBS +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_LIBS], [ + vars="$@" + for i in $vars; do + if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then + # Convert foo.lib to -lfoo for GCC. No-op if not *.lib + i=`echo "$i" | sed -e 's/^\([[^-]].*\)\.lib[$]/-l\1/i'` + fi + PKG_LIBS="$PKG_LIBS $i" + done + AC_SUBST(PKG_LIBS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_CFLAGS -- +# +# Specify one or more CFLAGS. Users should check for +# the right platform before adding to their list. +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_CFLAGS +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_CFLAGS], [ + PKG_CFLAGS="$PKG_CFLAGS $@" + AC_SUBST(PKG_CFLAGS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_CLEANFILES -- +# +# Specify one or more CLEANFILES. +# +# Arguments: +# one or more file names to clean target +# +# Results: +# +# Appends to CLEANFILES, already defined for subst in LOAD_TCLCONFIG +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_CLEANFILES], [ + CLEANFILES="$CLEANFILES $@" +]) + +#------------------------------------------------------------------------ +# TEA_PREFIX -- +# +# Handle the --prefix=... option by defaulting to what Tcl gave +# +# Arguments: +# none +# +# Results: +# +# If --prefix or --exec-prefix was not specified, $prefix and +# $exec_prefix will be set to the values given to Tcl when it was +# configured. +#------------------------------------------------------------------------ +AC_DEFUN([TEA_PREFIX], [ + if test "${prefix}" = "NONE"; then + prefix_default=yes + if test x"${TCL_PREFIX}" != x; then + AC_MSG_NOTICE([--prefix defaulting to TCL_PREFIX ${TCL_PREFIX}]) + prefix=${TCL_PREFIX} + else + AC_MSG_NOTICE([--prefix defaulting to /usr/local]) + prefix=/usr/local + fi + fi + if test "${exec_prefix}" = "NONE" -a x"${prefix_default}" = x"yes" \ + -o x"${exec_prefix_default}" = x"yes" ; then + if test x"${TCL_EXEC_PREFIX}" != x; then + AC_MSG_NOTICE([--exec-prefix defaulting to TCL_EXEC_PREFIX ${TCL_EXEC_PREFIX}]) + exec_prefix=${TCL_EXEC_PREFIX} + else + AC_MSG_NOTICE([--exec-prefix defaulting to ${prefix}]) + exec_prefix=$prefix + fi + fi +]) + +#------------------------------------------------------------------------ +# TEA_SETUP_COMPILER_CC -- +# +# Do compiler checks the way we want. This is just a replacement +# for AC_PROG_CC in TEA configure.in files to make them cleaner. +# +# Arguments: +# none +# +# Results: +# +# Sets up CC var and other standard bits we need to make executables. +#------------------------------------------------------------------------ +AC_DEFUN([TEA_SETUP_COMPILER_CC], [ + # Don't put any macros that use the compiler (e.g. AC_TRY_COMPILE) + # in this macro, they need to go into TEA_SETUP_COMPILER instead. + + AC_PROG_CC + AC_PROG_CPP + + INSTALL="\$(SHELL) \$(srcdir)/tclconfig/install-sh -c" + AC_SUBST(INSTALL) + + #-------------------------------------------------------------------- + # Checks to see if the make program sets the $MAKE variable. + #-------------------------------------------------------------------- + + AC_PROG_MAKE_SET + + #-------------------------------------------------------------------- + # Find ranlib + #-------------------------------------------------------------------- + + AC_CHECK_TOOL(RANLIB, ranlib) + + #-------------------------------------------------------------------- + # Determines the correct binary file extension (.o, .obj, .exe etc.) + #-------------------------------------------------------------------- + + AC_OBJEXT + AC_EXEEXT +]) + +#------------------------------------------------------------------------ +# TEA_SETUP_COMPILER -- +# +# Do compiler checks that use the compiler. This must go after +# TEA_SETUP_COMPILER_CC, which does the actual compiler check. +# +# Arguments: +# none +# +# Results: +# +# Sets up CC var and other standard bits we need to make executables. +#------------------------------------------------------------------------ +AC_DEFUN([TEA_SETUP_COMPILER], [ + # Any macros that use the compiler (e.g. AC_TRY_COMPILE) have to go here. + AC_REQUIRE([TEA_SETUP_COMPILER_CC]) + + #------------------------------------------------------------------------ + # If we're using GCC, see if the compiler understands -pipe. If so, use it. + # It makes compiling go faster. (This is only a performance feature.) + #------------------------------------------------------------------------ + + if test -z "$no_pipe" -a -n "$GCC"; then + AC_CACHE_CHECK([if the compiler understands -pipe], + tcl_cv_cc_pipe, [ + hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -pipe" + AC_TRY_COMPILE(,, tcl_cv_cc_pipe=yes, tcl_cv_cc_pipe=no) + CFLAGS=$hold_cflags]) + if test $tcl_cv_cc_pipe = yes; then + CFLAGS="$CFLAGS -pipe" + fi + fi + + #-------------------------------------------------------------------- + # Common compiler flag setup + #-------------------------------------------------------------------- + + AC_C_BIGENDIAN + if test "${TEA_PLATFORM}" = "unix" ; then + TEA_TCL_LINK_LIBS + TEA_MISSING_POSIX_HEADERS + # Let the user call this, because if it triggers, they will + # need a compat/strtod.c that is correct. Users can also + # use Tcl_GetDouble(FromObj) instead. + #TEA_BUGGY_STRTOD + fi +]) + +#------------------------------------------------------------------------ +# TEA_MAKE_LIB -- +# +# Generate a line that can be used to build a shared/unshared library +# in a platform independent manner. +# +# Arguments: +# none +# +# Requires: +# +# Results: +# +# Defines the following vars: +# CFLAGS - Done late here to note disturb other AC macros +# MAKE_LIB - Command to execute to build the Tcl library; +# differs depending on whether or not Tcl is being +# compiled as a shared library. +# MAKE_SHARED_LIB Makefile rule for building a shared library +# MAKE_STATIC_LIB Makefile rule for building a static library +# MAKE_STUB_LIB Makefile rule for building a stub library +# VC_MANIFEST_EMBED_DLL Makefile rule for embedded VC manifest in DLL +# VC_MANIFEST_EMBED_EXE Makefile rule for embedded VC manifest in EXE +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_MAKE_LIB], [ + if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes"; then + MAKE_STATIC_LIB="\${STLIB_LD} -out:\[$]@ \$(PKG_OBJECTS)" + MAKE_SHARED_LIB="\${SHLIB_LD} \${SHLIB_LD_LIBS} \${LDFLAGS_DEFAULT} -out:\[$]@ \$(PKG_OBJECTS)" + AC_EGREP_CPP([manifest needed], [ +#if defined(_MSC_VER) && _MSC_VER >= 1400 +print("manifest needed") +#endif + ], [ + # Could do a CHECK_PROG for mt, but should always be with MSVC8+ + VC_MANIFEST_EMBED_DLL="if test -f \[$]@.manifest ; then mt.exe -nologo -manifest \[$]@.manifest -outputresource:\[$]@\;2 ; fi" + VC_MANIFEST_EMBED_EXE="if test -f \[$]@.manifest ; then mt.exe -nologo -manifest \[$]@.manifest -outputresource:\[$]@\;1 ; fi" + MAKE_SHARED_LIB="${MAKE_SHARED_LIB} ; ${VC_MANIFEST_EMBED_DLL}" + TEA_ADD_CLEANFILES([*.manifest]) + ]) + MAKE_STUB_LIB="\${STLIB_LD} -out:\[$]@ \$(PKG_STUB_OBJECTS)" + else + MAKE_STATIC_LIB="\${STLIB_LD} \[$]@ \$(PKG_OBJECTS)" + MAKE_SHARED_LIB="\${SHLIB_LD} -o \[$]@ \$(PKG_OBJECTS) \${SHLIB_LD_LIBS}" + MAKE_STUB_LIB="\${STLIB_LD} \[$]@ \$(PKG_STUB_OBJECTS)" + fi + + if test "${SHARED_BUILD}" = "1" ; then + MAKE_LIB="${MAKE_SHARED_LIB} " + else + MAKE_LIB="${MAKE_STATIC_LIB} " + fi + + #-------------------------------------------------------------------- + # Shared libraries and static libraries have different names. + # Use the double eval to make sure any variables in the suffix is + # substituted. (@@@ Might not be necessary anymore) + #-------------------------------------------------------------------- + + if test "${TEA_PLATFORM}" = "windows" ; then + if test "${SHARED_BUILD}" = "1" ; then + # We force the unresolved linking of symbols that are really in + # the private libraries of Tcl and Tk. + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}`\"" + if test x"${TK_BIN_DIR}" != x ; then + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TK_BIN_DIR}/${TK_STUB_LIB_FILE}`\"" + fi + eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" + else + eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" + fi + # Some packages build their own stubs libraries + eval eval "PKG_STUB_LIB_FILE=${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}" + if test "$GCC" = "yes"; then + PKG_STUB_LIB_FILE=lib${PKG_STUB_LIB_FILE} + fi + # These aren't needed on Windows (either MSVC or gcc) + RANLIB=: + RANLIB_STUB=: + else + RANLIB_STUB="${RANLIB}" + if test "${SHARED_BUILD}" = "1" ; then + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TCL_STUB_LIB_SPEC}" + if test x"${TK_BIN_DIR}" != x ; then + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TK_STUB_LIB_SPEC}" + fi + eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" + RANLIB=: + else + eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" + fi + # Some packages build their own stubs libraries + eval eval "PKG_STUB_LIB_FILE=lib${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}" + fi + + # These are escaped so that only CFLAGS is picked up at configure time. + # The other values will be substituted at make time. + CFLAGS="${CFLAGS} \${CFLAGS_DEFAULT} \${CFLAGS_WARNING}" + if test "${SHARED_BUILD}" = "1" ; then + CFLAGS="${CFLAGS} \${SHLIB_CFLAGS}" + fi + + AC_SUBST(MAKE_LIB) + AC_SUBST(MAKE_SHARED_LIB) + AC_SUBST(MAKE_STATIC_LIB) + AC_SUBST(MAKE_STUB_LIB) + AC_SUBST(RANLIB_STUB) + AC_SUBST(VC_MANIFEST_EMBED_DLL) + AC_SUBST(VC_MANIFEST_EMBED_EXE) +]) + +#------------------------------------------------------------------------ +# TEA_LIB_SPEC -- +# +# Compute the name of an existing object library located in libdir +# from the given base name and produce the appropriate linker flags. +# +# Arguments: +# basename The base name of the library without version +# numbers, extensions, or "lib" prefixes. +# extra_dir Extra directory in which to search for the +# library. This location is used first, then +# $prefix/$exec-prefix, then some defaults. +# +# Requires: +# TEA_INIT and TEA_PREFIX must be called first. +# +# Results: +# +# Defines the following vars: +# ${basename}_LIB_NAME The computed library name. +# ${basename}_LIB_SPEC The computed linker flags. +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_LIB_SPEC], [ + AC_MSG_CHECKING([for $1 library]) + + # Look in exec-prefix for the library (defined by TEA_PREFIX). + + tea_lib_name_dir="${exec_prefix}/lib" + + # Or in a user-specified location. + + if test x"$2" != x ; then + tea_extra_lib_dir=$2 + else + tea_extra_lib_dir=NONE + fi + + for i in \ + `ls -dr ${tea_extra_lib_dir}/$1[[0-9]]*.lib 2>/dev/null ` \ + `ls -dr ${tea_extra_lib_dir}/lib$1[[0-9]]* 2>/dev/null ` \ + `ls -dr ${tea_lib_name_dir}/$1[[0-9]]*.lib 2>/dev/null ` \ + `ls -dr ${tea_lib_name_dir}/lib$1[[0-9]]* 2>/dev/null ` \ + `ls -dr /usr/lib/$1[[0-9]]*.lib 2>/dev/null ` \ + `ls -dr /usr/lib/lib$1[[0-9]]* 2>/dev/null ` \ + `ls -dr /usr/lib64/$1[[0-9]]*.lib 2>/dev/null ` \ + `ls -dr /usr/lib64/lib$1[[0-9]]* 2>/dev/null ` \ + `ls -dr /usr/local/lib/$1[[0-9]]*.lib 2>/dev/null ` \ + `ls -dr /usr/local/lib/lib$1[[0-9]]* 2>/dev/null ` ; do + if test -f "$i" ; then + tea_lib_name_dir=`dirname $i` + $1_LIB_NAME=`basename $i` + $1_LIB_PATH_NAME=$i + break + fi + done + + if test "${TEA_PLATFORM}" = "windows"; then + $1_LIB_SPEC=\"`${CYGPATH} ${$1_LIB_PATH_NAME} 2>/dev/null`\" + else + # Strip off the leading "lib" and trailing ".a" or ".so" + + tea_lib_name_lib=`echo ${$1_LIB_NAME}|sed -e 's/^lib//' -e 's/\.[[^.]]*$//' -e 's/\.so.*//'` + $1_LIB_SPEC="-L${tea_lib_name_dir} -l${tea_lib_name_lib}" + fi + + if test "x${$1_LIB_NAME}" = x ; then + AC_MSG_ERROR([not found]) + else + AC_MSG_RESULT([${$1_LIB_SPEC}]) + fi +]) + +#------------------------------------------------------------------------ +# TEA_PRIVATE_TCL_HEADERS -- +# +# Locate the private Tcl include files +# +# Arguments: +# +# Requires: +# TCL_SRC_DIR Assumes that TEA_LOAD_TCLCONFIG has +# already been called. +# +# Results: +# +# Substitutes the following vars: +# TCL_TOP_DIR_NATIVE +# TCL_INCLUDES +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PRIVATE_TCL_HEADERS], [ + # Allow for --with-tclinclude to take effect and define ${ac_cv_c_tclh} + AC_REQUIRE([TEA_PUBLIC_TCL_HEADERS]) + AC_MSG_CHECKING([for Tcl private include files]) + + TCL_SRC_DIR_NATIVE=`${CYGPATH} ${TCL_SRC_DIR}` + TCL_TOP_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}\" + + # Check to see if tclPort.h isn't already with the public headers + # Don't look for tclInt.h because that resides with tcl.h in the core + # sources, but the Port headers are in a different directory + if test "${TEA_PLATFORM}" = "windows" -a \ + -f "${ac_cv_c_tclh}/tclWinPort.h"; then + result="private headers found with public headers" + elif test "${TEA_PLATFORM}" = "unix" -a \ + -f "${ac_cv_c_tclh}/tclUnixPort.h"; then + result="private headers found with public headers" + else + TCL_GENERIC_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/generic\" + if test "${TEA_PLATFORM}" = "windows"; then + TCL_PLATFORM_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/win\" + else + TCL_PLATFORM_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/unix\" + fi + # Overwrite the previous TCL_INCLUDES as this should capture both + # public and private headers in the same set. + # We want to ensure these are substituted so as not to require + # any *_NATIVE vars be defined in the Makefile + TCL_INCLUDES="-I${TCL_GENERIC_DIR_NATIVE} -I${TCL_PLATFORM_DIR_NATIVE}" + if test "`uname -s`" = "Darwin"; then + # If Tcl was built as a framework, attempt to use + # the framework's Headers and PrivateHeaders directories + case ${TCL_DEFS} in + *TCL_FRAMEWORK*) + if test -d "${TCL_BIN_DIR}/Headers" -a \ + -d "${TCL_BIN_DIR}/PrivateHeaders"; then + TCL_INCLUDES="-I\"${TCL_BIN_DIR}/Headers\" -I\"${TCL_BIN_DIR}/PrivateHeaders\" ${TCL_INCLUDES}" + else + TCL_INCLUDES="${TCL_INCLUDES} ${TCL_INCLUDE_SPEC} `echo "${TCL_INCLUDE_SPEC}" | sed -e 's/Headers/PrivateHeaders/'`" + fi + ;; + esac + result="Using ${TCL_INCLUDES}" + else + if test ! -f "${TCL_SRC_DIR}/generic/tclInt.h" ; then + AC_MSG_ERROR([Cannot find private header tclInt.h in ${TCL_SRC_DIR}]) + fi + result="Using srcdir found in tclConfig.sh: ${TCL_SRC_DIR}" + fi + fi + + AC_SUBST(TCL_TOP_DIR_NATIVE) + + AC_SUBST(TCL_INCLUDES) + AC_MSG_RESULT([${result}]) +]) + +#------------------------------------------------------------------------ +# TEA_PUBLIC_TCL_HEADERS -- +# +# Locate the installed public Tcl header files +# +# Arguments: +# None. +# +# Requires: +# CYGPATH must be set +# +# Results: +# +# Adds a --with-tclinclude switch to configure. +# Result is cached. +# +# Substitutes the following vars: +# TCL_INCLUDES +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PUBLIC_TCL_HEADERS], [ + AC_MSG_CHECKING([for Tcl public headers]) + + AC_ARG_WITH(tclinclude, [ --with-tclinclude directory containing the public Tcl header files], with_tclinclude=${withval}) + + AC_CACHE_VAL(ac_cv_c_tclh, [ + # Use the value from --with-tclinclude, if it was given + + if test x"${with_tclinclude}" != x ; then + if test -f "${with_tclinclude}/tcl.h" ; then + ac_cv_c_tclh=${with_tclinclude} + else + AC_MSG_ERROR([${with_tclinclude} directory does not contain tcl.h]) + fi + else + list="" + if test "`uname -s`" = "Darwin"; then + # If Tcl was built as a framework, attempt to use + # the framework's Headers directory + case ${TCL_DEFS} in + *TCL_FRAMEWORK*) + list="`ls -d ${TCL_BIN_DIR}/Headers 2>/dev/null`" + ;; + esac + fi + + # Look in the source dir only if Tcl is not installed, + # and in that situation, look there before installed locations. + if test -f "${TCL_BIN_DIR}/Makefile" ; then + list="$list `ls -d ${TCL_SRC_DIR}/generic 2>/dev/null`" + fi + + # Check order: pkg --prefix location, Tcl's --prefix location, + # relative to directory of tclConfig.sh. + + eval "temp_includedir=${includedir}" + list="$list \ + `ls -d ${temp_includedir} 2>/dev/null` \ + `ls -d ${TCL_PREFIX}/include 2>/dev/null` \ + `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null`" + if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then + list="$list /usr/local/include /usr/include" + if test x"${TCL_INCLUDE_SPEC}" != x ; then + d=`echo "${TCL_INCLUDE_SPEC}" | sed -e 's/^-I//'` + list="$list `ls -d ${d} 2>/dev/null`" + fi + fi + for i in $list ; do + if test -f "$i/tcl.h" ; then + ac_cv_c_tclh=$i + break + fi + done + fi + ]) + + # Print a message based on how we determined the include path + + if test x"${ac_cv_c_tclh}" = x ; then + AC_MSG_ERROR([tcl.h not found. Please specify its location with --with-tclinclude]) + else + AC_MSG_RESULT([${ac_cv_c_tclh}]) + fi + + # Convert to a native path and substitute into the output files. + + INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tclh}` + + TCL_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" + + AC_SUBST(TCL_INCLUDES) +]) + +#------------------------------------------------------------------------ +# TEA_PRIVATE_TK_HEADERS -- +# +# Locate the private Tk include files +# +# Arguments: +# +# Requires: +# TK_SRC_DIR Assumes that TEA_LOAD_TKCONFIG has +# already been called. +# +# Results: +# +# Substitutes the following vars: +# TK_INCLUDES +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PRIVATE_TK_HEADERS], [ + # Allow for --with-tkinclude to take effect and define ${ac_cv_c_tkh} + AC_REQUIRE([TEA_PUBLIC_TK_HEADERS]) + AC_MSG_CHECKING([for Tk private include files]) + + TK_SRC_DIR_NATIVE=`${CYGPATH} ${TK_SRC_DIR}` + TK_TOP_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}\" + + # Check to see if tkPort.h isn't already with the public headers + # Don't look for tkInt.h because that resides with tk.h in the core + # sources, but the Port headers are in a different directory + if test "${TEA_PLATFORM}" = "windows" -a \ + -f "${ac_cv_c_tkh}/tkWinPort.h"; then + result="private headers found with public headers" + elif test "${TEA_PLATFORM}" = "unix" -a \ + -f "${ac_cv_c_tkh}/tkUnixPort.h"; then + result="private headers found with public headers" + else + TK_GENERIC_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/generic\" + TK_XLIB_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/xlib\" + if test "${TEA_PLATFORM}" = "windows"; then + TK_PLATFORM_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/win\" + else + TK_PLATFORM_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/unix\" + fi + # Overwrite the previous TK_INCLUDES as this should capture both + # public and private headers in the same set. + # We want to ensure these are substituted so as not to require + # any *_NATIVE vars be defined in the Makefile + TK_INCLUDES="-I${TK_GENERIC_DIR_NATIVE} -I${TK_PLATFORM_DIR_NATIVE}" + # Detect and add ttk subdir + if test -d "${TK_SRC_DIR}/generic/ttk"; then + TK_INCLUDES="${TK_INCLUDES} -I\"${TK_SRC_DIR_NATIVE}/generic/ttk\"" + fi + if test "${TEA_WINDOWINGSYSTEM}" != "x11"; then + TK_INCLUDES="${TK_INCLUDES} -I\"${TK_XLIB_DIR_NATIVE}\"" + fi + if test "${TEA_WINDOWINGSYSTEM}" = "aqua"; then + TK_INCLUDES="${TK_INCLUDES} -I\"${TK_SRC_DIR_NATIVE}/macosx\"" + fi + if test "`uname -s`" = "Darwin"; then + # If Tk was built as a framework, attempt to use + # the framework's Headers and PrivateHeaders directories + case ${TK_DEFS} in + *TK_FRAMEWORK*) + if test -d "${TK_BIN_DIR}/Headers" -a \ + -d "${TK_BIN_DIR}/PrivateHeaders"; then + TK_INCLUDES="-I\"${TK_BIN_DIR}/Headers\" -I\"${TK_BIN_DIR}/PrivateHeaders\" ${TK_INCLUDES}" + else + TK_INCLUDES="${TK_INCLUDES} ${TK_INCLUDE_SPEC} `echo "${TK_INCLUDE_SPEC}" | sed -e 's/Headers/PrivateHeaders/'`" + fi + ;; + esac + result="Using ${TK_INCLUDES}" + else + if test ! -f "${TK_SRC_DIR}/generic/tkInt.h" ; then + AC_MSG_ERROR([Cannot find private header tkInt.h in ${TK_SRC_DIR}]) + fi + result="Using srcdir found in tkConfig.sh: ${TK_SRC_DIR}" + fi + fi + + AC_SUBST(TK_TOP_DIR_NATIVE) + AC_SUBST(TK_XLIB_DIR_NATIVE) + + AC_SUBST(TK_INCLUDES) + AC_MSG_RESULT([${result}]) +]) + +#------------------------------------------------------------------------ +# TEA_PUBLIC_TK_HEADERS -- +# +# Locate the installed public Tk header files +# +# Arguments: +# None. +# +# Requires: +# CYGPATH must be set +# +# Results: +# +# Adds a --with-tkinclude switch to configure. +# Result is cached. +# +# Substitutes the following vars: +# TK_INCLUDES +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PUBLIC_TK_HEADERS], [ + AC_MSG_CHECKING([for Tk public headers]) + + AC_ARG_WITH(tkinclude, [ --with-tkinclude directory containing the public Tk header files], with_tkinclude=${withval}) + + AC_CACHE_VAL(ac_cv_c_tkh, [ + # Use the value from --with-tkinclude, if it was given + + if test x"${with_tkinclude}" != x ; then + if test -f "${with_tkinclude}/tk.h" ; then + ac_cv_c_tkh=${with_tkinclude} + else + AC_MSG_ERROR([${with_tkinclude} directory does not contain tk.h]) + fi + else + list="" + if test "`uname -s`" = "Darwin"; then + # If Tk was built as a framework, attempt to use + # the framework's Headers directory. + case ${TK_DEFS} in + *TK_FRAMEWORK*) + list="`ls -d ${TK_BIN_DIR}/Headers 2>/dev/null`" + ;; + esac + fi + + # Look in the source dir only if Tk is not installed, + # and in that situation, look there before installed locations. + if test -f "${TK_BIN_DIR}/Makefile" ; then + list="$list `ls -d ${TK_SRC_DIR}/generic 2>/dev/null`" + fi + + # Check order: pkg --prefix location, Tk's --prefix location, + # relative to directory of tkConfig.sh, Tcl's --prefix location, + # relative to directory of tclConfig.sh. + + eval "temp_includedir=${includedir}" + list="$list \ + `ls -d ${temp_includedir} 2>/dev/null` \ + `ls -d ${TK_PREFIX}/include 2>/dev/null` \ + `ls -d ${TK_BIN_DIR}/../include 2>/dev/null` \ + `ls -d ${TCL_PREFIX}/include 2>/dev/null` \ + `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null`" + if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then + list="$list /usr/local/include /usr/include" + if test x"${TK_INCLUDE_SPEC}" != x ; then + d=`echo "${TK_INCLUDE_SPEC}" | sed -e 's/^-I//'` + list="$list `ls -d ${d} 2>/dev/null`" + fi + fi + for i in $list ; do + if test -f "$i/tk.h" ; then + ac_cv_c_tkh=$i + break + fi + done + fi + ]) + + # Print a message based on how we determined the include path + + if test x"${ac_cv_c_tkh}" = x ; then + AC_MSG_ERROR([tk.h not found. Please specify its location with --with-tkinclude]) + else + AC_MSG_RESULT([${ac_cv_c_tkh}]) + fi + + # Convert to a native path and substitute into the output files. + + INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tkh}` + + TK_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" + + AC_SUBST(TK_INCLUDES) + + if test "${TEA_WINDOWINGSYSTEM}" != "x11"; then + # On Windows and Aqua, we need the X compat headers + AC_MSG_CHECKING([for X11 header files]) + if test ! -r "${INCLUDE_DIR_NATIVE}/X11/Xlib.h"; then + INCLUDE_DIR_NATIVE="`${CYGPATH} ${TK_SRC_DIR}/xlib`" + TK_XINCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" + AC_SUBST(TK_XINCLUDES) + fi + AC_MSG_RESULT([${INCLUDE_DIR_NATIVE}]) + fi +]) + +#------------------------------------------------------------------------ +# TEA_PATH_CONFIG -- +# +# Locate the ${1}Config.sh file and perform a sanity check on +# the ${1} compile flags. These are used by packages like +# [incr Tk] that load *Config.sh files from more than Tcl and Tk. +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --with-$1=... +# +# Defines the following vars: +# $1_BIN_DIR Full path to the directory containing +# the $1Config.sh file +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PATH_CONFIG], [ + # + # Ok, lets find the $1 configuration + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-$1 + # + + if test x"${no_$1}" = x ; then + # we reset no_$1 in case something fails here + no_$1=true + AC_ARG_WITH($1, [ --with-$1 directory containing $1 configuration ($1Config.sh)], with_$1config=${withval}) + AC_MSG_CHECKING([for $1 configuration]) + AC_CACHE_VAL(ac_cv_c_$1config,[ + + # First check to see if --with-$1 was specified. + if test x"${with_$1config}" != x ; then + case ${with_$1config} in + */$1Config.sh ) + if test -f ${with_$1config}; then + AC_MSG_WARN([--with-$1 argument should refer to directory containing $1Config.sh, not to $1Config.sh itself]) + with_$1config=`echo ${with_$1config} | sed 's!/$1Config\.sh$!!'` + fi;; + esac + if test -f "${with_$1config}/$1Config.sh" ; then + ac_cv_c_$1config=`(cd ${with_$1config}; pwd)` + else + AC_MSG_ERROR([${with_$1config} directory doesn't contain $1Config.sh]) + fi + fi + + # then check for a private $1 installation + if test x"${ac_cv_c_$1config}" = x ; then + for i in \ + ../$1 \ + `ls -dr ../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ + `ls -dr ../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ + `ls -dr ../$1*[[0-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ + ../../$1 \ + `ls -dr ../../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ + `ls -dr ../../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ + `ls -dr ../../$1*[[0-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ + ../../../$1 \ + `ls -dr ../../../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ + `ls -dr ../../../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ + `ls -dr ../../../$1*[[0-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ + ${srcdir}/../$1 \ + `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ + `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ + `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ + ; do + if test -f "$i/$1Config.sh" ; then + ac_cv_c_$1config=`(cd $i; pwd)` + break + fi + if test -f "$i/unix/$1Config.sh" ; then + ac_cv_c_$1config=`(cd $i/unix; pwd)` + break + fi + done + fi + + # check in a few common install locations + if test x"${ac_cv_c_$1config}" = x ; then + for i in `ls -d ${libdir} 2>/dev/null` \ + `ls -d ${exec_prefix}/lib 2>/dev/null` \ + `ls -d ${prefix}/lib 2>/dev/null` \ + `ls -d /usr/local/lib 2>/dev/null` \ + `ls -d /usr/contrib/lib 2>/dev/null` \ + `ls -d /usr/lib 2>/dev/null` \ + `ls -d /usr/lib64 2>/dev/null` \ + ; do + if test -f "$i/$1Config.sh" ; then + ac_cv_c_$1config=`(cd $i; pwd)` + break + fi + done + fi + ]) + + if test x"${ac_cv_c_$1config}" = x ; then + $1_BIN_DIR="# no $1 configs found" + AC_MSG_WARN([Cannot find $1 configuration definitions]) + exit 0 + else + no_$1= + $1_BIN_DIR=${ac_cv_c_$1config} + AC_MSG_RESULT([found $$1_BIN_DIR/$1Config.sh]) + fi + fi +]) + +#------------------------------------------------------------------------ +# TEA_LOAD_CONFIG -- +# +# Load the $1Config.sh file +# +# Arguments: +# +# Requires the following vars to be set: +# $1_BIN_DIR +# +# Results: +# +# Substitutes the following vars: +# $1_SRC_DIR +# $1_LIB_FILE +# $1_LIB_SPEC +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_LOAD_CONFIG], [ + AC_MSG_CHECKING([for existence of ${$1_BIN_DIR}/$1Config.sh]) + + if test -f "${$1_BIN_DIR}/$1Config.sh" ; then + AC_MSG_RESULT([loading]) + . "${$1_BIN_DIR}/$1Config.sh" + else + AC_MSG_RESULT([file not found]) + fi + + # + # If the $1_BIN_DIR is the build directory (not the install directory), + # then set the common variable name to the value of the build variables. + # For example, the variable $1_LIB_SPEC will be set to the value + # of $1_BUILD_LIB_SPEC. An extension should make use of $1_LIB_SPEC + # instead of $1_BUILD_LIB_SPEC since it will work with both an + # installed and uninstalled version of Tcl. + # + + if test -f "${$1_BIN_DIR}/Makefile" ; then + AC_MSG_WARN([Found Makefile - using build library specs for $1]) + $1_LIB_SPEC=${$1_BUILD_LIB_SPEC} + $1_STUB_LIB_SPEC=${$1_BUILD_STUB_LIB_SPEC} + $1_STUB_LIB_PATH=${$1_BUILD_STUB_LIB_PATH} + $1_INCLUDE_SPEC=${$1_BUILD_INCLUDE_SPEC} + $1_LIBRARY_PATH=${$1_LIBRARY_PATH} + fi + + AC_SUBST($1_VERSION) + AC_SUBST($1_BIN_DIR) + AC_SUBST($1_SRC_DIR) + + AC_SUBST($1_LIB_FILE) + AC_SUBST($1_LIB_SPEC) + + AC_SUBST($1_STUB_LIB_FILE) + AC_SUBST($1_STUB_LIB_SPEC) + AC_SUBST($1_STUB_LIB_PATH) + + # Allow the caller to prevent this auto-check by specifying any 2nd arg + AS_IF([test "x$2" = x], [ + # Check both upper and lower-case variants + # If a dev wanted non-stubs libs, this function could take an option + # to not use _STUB in the paths below + AS_IF([test "x${$1_STUB_LIB_SPEC}" = x], + [TEA_LOAD_CONFIG_LIB(translit($1,[a-z],[A-Z])_STUB)], + [TEA_LOAD_CONFIG_LIB($1_STUB)]) + ]) +]) + +#------------------------------------------------------------------------ +# TEA_LOAD_CONFIG_LIB -- +# +# Helper function to load correct library from another extension's +# ${PACKAGE}Config.sh. +# +# Results: +# Adds to LIBS the appropriate extension library +#------------------------------------------------------------------------ +AC_DEFUN([TEA_LOAD_CONFIG_LIB], [ + AC_MSG_CHECKING([For $1 library for LIBS]) + # This simplifies the use of stub libraries by automatically adding + # the stub lib to your path. Normally this would add to SHLIB_LD_LIBS, + # but this is called before CONFIG_CFLAGS. More importantly, this adds + # to PKG_LIBS, which becomes LIBS, and that is only used by SHLIB_LD. + if test "x${$1_LIB_SPEC}" != "x" ; then + if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes" ; then + TEA_ADD_LIBS([\"`${CYGPATH} ${$1_LIB_PATH}`\"]) + AC_MSG_RESULT([using $1_LIB_PATH ${$1_LIB_PATH}]) + else + TEA_ADD_LIBS([${$1_LIB_SPEC}]) + AC_MSG_RESULT([using $1_LIB_SPEC ${$1_LIB_SPEC}]) + fi + else + AC_MSG_RESULT([file not found]) + fi +]) + +#------------------------------------------------------------------------ +# TEA_EXPORT_CONFIG -- +# +# Define the data to insert into the ${PACKAGE}Config.sh file +# +# Arguments: +# +# Requires the following vars to be set: +# $1 +# +# Results: +# Substitutes the following vars: +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_EXPORT_CONFIG], [ + #-------------------------------------------------------------------- + # These are for $1Config.sh + #-------------------------------------------------------------------- + + # pkglibdir must be a fully qualified path and (not ${exec_prefix}/lib) + eval pkglibdir="[$]{libdir}/$1${PACKAGE_VERSION}" + if test "${TCL_LIB_VERSIONS_OK}" = "ok"; then + eval $1_LIB_FLAG="-l$1${PACKAGE_VERSION}${DBGX}" + eval $1_STUB_LIB_FLAG="-l$1stub${PACKAGE_VERSION}${DBGX}" + else + eval $1_LIB_FLAG="-l$1`echo ${PACKAGE_VERSION} | tr -d .`${DBGX}" + eval $1_STUB_LIB_FLAG="-l$1stub`echo ${PACKAGE_VERSION} | tr -d .`${DBGX}" + fi + $1_BUILD_LIB_SPEC="-L`pwd` ${$1_LIB_FLAG}" + $1_LIB_SPEC="-L${pkglibdir} ${$1_LIB_FLAG}" + $1_BUILD_STUB_LIB_SPEC="-L`pwd` [$]{$1_STUB_LIB_FLAG}" + $1_STUB_LIB_SPEC="-L${pkglibdir} [$]{$1_STUB_LIB_FLAG}" + $1_BUILD_STUB_LIB_PATH="`pwd`/[$]{PKG_STUB_LIB_FILE}" + $1_STUB_LIB_PATH="${pkglibdir}/[$]{PKG_STUB_LIB_FILE}" + + AC_SUBST($1_BUILD_LIB_SPEC) + AC_SUBST($1_LIB_SPEC) + AC_SUBST($1_BUILD_STUB_LIB_SPEC) + AC_SUBST($1_STUB_LIB_SPEC) + AC_SUBST($1_BUILD_STUB_LIB_PATH) + AC_SUBST($1_STUB_LIB_PATH) + + AC_SUBST(MAJOR_VERSION) + AC_SUBST(MINOR_VERSION) + AC_SUBST(PATCHLEVEL) +]) + + +#------------------------------------------------------------------------ +# TEA_PATH_CELIB -- +# +# Locate Keuchel's celib emulation layer for targeting Win/CE +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --with-celib=... +# +# Defines the following vars: +# CELIB_DIR Full path to the directory containing +# the include and platform lib files +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PATH_CELIB], [ + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-celib + + if test x"${no_celib}" = x ; then + # we reset no_celib in case something fails here + no_celib=true + AC_ARG_WITH(celib,[ --with-celib=DIR use Windows/CE support library from DIR], with_celibconfig=${withval}) + AC_MSG_CHECKING([for Windows/CE celib directory]) + AC_CACHE_VAL(ac_cv_c_celibconfig,[ + # First check to see if --with-celibconfig was specified. + if test x"${with_celibconfig}" != x ; then + if test -d "${with_celibconfig}/inc" ; then + ac_cv_c_celibconfig=`(cd ${with_celibconfig}; pwd)` + else + AC_MSG_ERROR([${with_celibconfig} directory doesn't contain inc directory]) + fi + fi + + # then check for a celib library + if test x"${ac_cv_c_celibconfig}" = x ; then + for i in \ + ../celib-palm-3.0 \ + ../celib \ + ../../celib-palm-3.0 \ + ../../celib \ + `ls -dr ../celib-*3.[[0-9]]* 2>/dev/null` \ + ${srcdir}/../celib-palm-3.0 \ + ${srcdir}/../celib \ + `ls -dr ${srcdir}/../celib-*3.[[0-9]]* 2>/dev/null` \ + ; do + if test -d "$i/inc" ; then + ac_cv_c_celibconfig=`(cd $i; pwd)` + break + fi + done + fi + ]) + if test x"${ac_cv_c_celibconfig}" = x ; then + AC_MSG_ERROR([Cannot find celib support library directory]) + else + no_celib= + CELIB_DIR=${ac_cv_c_celibconfig} + CELIB_DIR=`echo "$CELIB_DIR" | sed -e 's!\\\!/!g'` + AC_MSG_RESULT([found $CELIB_DIR]) + fi + fi +]) + + +# Local Variables: +# mode: autoconf +# End: -- cgit v0.12