/*
 * Smithsonian Astrophysical Observatory, Cambridge, MA, USA
 * This code has been modified under the terms listed below and is made
 * available under the same terms.
 */

/*
 *
 * This file is copied from tclParse.c in the TCL library distribution.
 *
 *	Copyright (c) 1987-1993 The Regents of the University of
 *	California.
 *
 *	Copyright (c) 1994-1998 Sun Microsystems, Inc.
 * 
 */

/*
 * Since TCL 8.1.0 these routines have been replaced by ones that
 * generate byte-codes.  But since these routines are used in vector
 * expressions, where no such byte-compilation is necessary, I now
 * include them.  In fact, the byte-compiled versions would be slower
 * since the compiled code typically runs only one time.
 */

#include "bltInt.h"
#include "bltParse.h"

/*
 * A table used to classify input characters to assist in parsing
 * TCL commands.  The table should be indexed with a signed character
 * using the CHAR_TYPE macro.  The character may have a negative
 * value.  The CHAR_TYPE macro takes a pointer to a signed character
 * and a pointer to the last character in the source string.  If the
 * src pointer is pointing at the terminating null of the string,
 * CHAR_TYPE returns TCL_COMMAND_END.
 */

#define STATIC_STRING_SPACE	150
#define TCL_NORMAL		0x01
#define TCL_SPACE		0x02
#define TCL_COMMAND_END		0x04
#define TCL_QUOTE		0x08
#define TCL_OPEN_BRACKET	0x10
#define TCL_OPEN_BRACE		0x20
#define TCL_CLOSE_BRACE		0x40
#define TCL_BACKSLASH		0x80
#define TCL_DOLLAR		0x00

/*
 * The following table assigns a type to each character. Only types
 * meaningful to TCL parsing are represented here. The table is
 * designed to be referenced with either signed or unsigned characters,
 * so it has 384 entries. The first 128 entries correspond to negative
 * character values, the next 256 correspond to positive character
 * values. The last 128 entries are identical to the first 128. The
 * table is always indexed with a 128-byte offset (the 128th entry
 * corresponds to a 0 character value).
 */

static unsigned char tclTypeTable[] =
{
 /*
     * Negative character values, from -128 to -1:
     */

    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,

    /*
     * Positive character values, from 0-127:
     */

    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_SPACE, TCL_COMMAND_END, TCL_SPACE,
    TCL_SPACE, TCL_SPACE, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_SPACE, TCL_NORMAL, TCL_QUOTE, TCL_NORMAL,
    TCL_DOLLAR, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_COMMAND_END,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_OPEN_BRACKET,
    TCL_BACKSLASH, TCL_COMMAND_END, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_OPEN_BRACE,
    TCL_NORMAL, TCL_CLOSE_BRACE, TCL_NORMAL, TCL_NORMAL,

    /*
     * Large unsigned character values, from 128-255:
     */

    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
    TCL_NORMAL, TCL_NORMAL, TCL_NORMAL, TCL_NORMAL,
};

#define CHAR_TYPE(src,last) \
	(((src)==(last))?TCL_COMMAND_END:(tclTypeTable+128)[(int)*(src)])

/*
 *---------------------------------------------------------------------------
 *
 * Blt_ParseNestedCmd --
 *
 *	This procedure parses a nested TCL command between
 *	brackets, returning the result of the command.
 *
 * Results:
 *	The return value is a standard TCL result, which is
 *	TCL_OK unless there was an error while executing the
 *	nested command.  If an error occurs then interp->result
 *	contains a standard error message.  *TermPtr is filled
 *	in with the address of the character just after the
 *	last one processed;  this is usually the character just
 *	after the matching close-bracket, or the null character
 *	at the end of the string if the close-bracket was missing
 *	(a missing close bracket is an error).  The result returned
 *	by the command is stored in standard fashion in *parsePtr,
 *	null-terminated, with parsePtr->next pointing to the null
 *	character.
 *
 * Side effects:
 *	The storage space at *parsePtr may be expanded.
 *
 *---------------------------------------------------------------------------
 */
int Blt_ParseNestedCmd(
    Tcl_Interp* interp,		/* Interpreter to use for nested command
				 * evaluations and error messages. */
    const char *string,		/* Character just after opening bracket. */
    int flags,			/* Flags to pass to nested Tcl_Eval. */
    const char **termPtr,	/* Store address of terminating character
				 * here. */
    ParseValue *parsePtr)	/* Information about where to place
				 * result of command. */
{
  return TCL_ERROR;
}

/*
 *---------------------------------------------------------------------------
 *
 * Blt_ParseBraces --
 *
 *	This procedure scans the information between matching
 *	curly braces.
 *
 * Results:
 *	The return value is a standard TCL result, which is
 *	TCL_OK unless there was an error while parsing string.
 *	If an error occurs then interp->result contains a
 *	standard error message.  *TermPtr is filled
 *	in with the address of the character just after the
 *	last one successfully processed;  this is usually the
 *	character just after the matching close-brace.  The
 *	information between curly braces is stored in standard
 *	fashion in *parsePtr, null-terminated with parsePtr->next
 *	pointing to the terminating null character.
 *
 * Side effects:
 *	The storage space at *parsePtr may be expanded.
 *
 *---------------------------------------------------------------------------
 */

int Blt_ParseBraces(
    Tcl_Interp* interp,		/* Interpreter to use for nested command
				 * evaluations and error messages. */
    const char *string,		/* Character just after opening bracket. */
    const char **termPtr,	/* Store address of terminating character
				 * here. */
    ParseValue *parsePtr)	/* Information about where to place
				 * result of command. */
{
    int level;
    const char *src;
    char *dest, *end;
    char c;
    const char *lastChar = string + strlen(string);

    src = string;
    dest = parsePtr->next;
    end = parsePtr->end;
    level = 1;

    /*
     * Copy the characters one at a time to the result area, stopping
     * when the matching close-brace is found.
     */

    for (;;) {
	c = *src;
	src++;

	if (dest == end) {
	    parsePtr->next = dest;
	    (*parsePtr->expandProc) (parsePtr, 20);
	    dest = parsePtr->next;
	    end = parsePtr->end;
	}
	*dest = c;
	dest++;

	if (CHAR_TYPE(src - 1, lastChar) == TCL_NORMAL) {
	    continue;
	} else if (c == '{') {
	    level++;
	} else if (c == '}') {
	    level--;
	    if (level == 0) {
		dest--;		/* Don't copy the last close brace. */
		break;
	    }
	} else if (c == '\\') {
	    int count;

	    /*
	     * Must always squish out backslash-newlines, even when in
	     * braces.  This is needed so that this sequence can appear
	     * anywhere in a command, such as the middle of an expression.
	     */

	    if (*src == '\n') {
		dest[-1] = Tcl_Backslash(src - 1, &count);
		src += count - 1;
	    } else {
		Tcl_Backslash(src - 1, &count);
		while (count > 1) {
		    if (dest == end) {
			parsePtr->next = dest;
			(*parsePtr->expandProc) (parsePtr, 20);
			dest = parsePtr->next;
			end = parsePtr->end;
		    }
		    *dest = *src;
		    dest++;
		    src++;
		    count--;
		}
	    }
	} else if (c == '\0') {
	    Tcl_AppendResult(interp, "missing close-brace", (char *)NULL);
	    *termPtr = string - 1;
	    return TCL_ERROR;
	}
    }

    *dest = '\0';
    parsePtr->next = dest;
    *termPtr = src;
    return TCL_OK;
}

/*
 *---------------------------------------------------------------------------
 *
 * Blt_ExpandParseValue --
 *
 *	This procedure is commonly used as the value of the
 *	expandProc in a ParseValue.  It uses malloc to allocate
 *	more space for the result of a parse.
 *
 * Results:
 *	The buffer space in *parsePtr is reallocated to something
 *	larger, and if parsePtr->clientData is non-zero the old
 *	buffer is freed.  Information is copied from the old
 *	buffer to the new one.
 *
 * Side effects:
 *	None.
 *
 *---------------------------------------------------------------------------
 */
void Blt_ExpandParseValue(
    ParseValue *parsePtr,	/* Information about buffer that
				 * must be expanded.  If the clientData
				 * in the structure is non-zero, it
				 * means that the current buffer is
				 * dynamically allocated. */
    int needed)			/* Minimum amount of additional space
				 * to allocate. */
{
    int size;
    char *buffer;

    /*
     * Either double the size of the buffer or add enough new space
     * to meet the demand, whichever produces a larger new buffer.
     */
    size = (parsePtr->end - parsePtr->buffer) + 1;
    if (size < needed) {
	size += needed;
    } else {
	size += size;
    }
    buffer = malloc((unsigned int)size);

    /*
     * Copy from old buffer to new, free old buffer if needed, and
     * mark new buffer as malloc-ed.
     */
    memcpy((VOID *) buffer, (VOID *) parsePtr->buffer,
	(size_t) (parsePtr->next - parsePtr->buffer));
    parsePtr->next = buffer + (parsePtr->next - parsePtr->buffer);
    if (parsePtr->clientData != 0) {
	free(parsePtr->buffer);
    }
    parsePtr->buffer = buffer;
    parsePtr->end = buffer + size - 1;
    parsePtr->clientData = (ClientData)1;
}

/*
 *---------------------------------------------------------------------------
 *
 * Blt_ParseQuotes --
 *
 *	This procedure parses a double-quoted string such as a
 *	quoted TCL command argument or a quoted value in a Tcl
 *	expression.  This procedure is also used to parse array
 *	element names within parentheses, or anything else that
 *	needs all the substitutions that happen in quotes.
 *
 * Results:
 *	The return value is a standard TCL result, which is
 *	TCL_OK unless there was an error while parsing the
 *	quoted string.  If an error occurs then interp->result
 *	contains a standard error message.  *TermPtr is filled
 *	in with the address of the character just after the
 *	last one successfully processed;  this is usually the
 *	character just after the matching close-quote.  The
 *	fully-substituted contents of the quotes are stored in
 *	standard fashion in *parsePtr, null-terminated with
 *	parsePtr->next pointing to the terminating null character.
 *
 * Side effects:
 *	The buffer space in parsePtr may be enlarged by calling its
 *	expandProc.
 *
 *---------------------------------------------------------------------------
 */
int Blt_ParseQuotes(
    Tcl_Interp* interp,		/* Interpreter to use for nested command
				 * evaluations and error messages. */
    const char *string,		/* Character just after opening double-
				 * quote. */
    int termChar,		/* Character that terminates "quoted" string
				 * (usually double-quote, but sometimes
				 * right-paren or something else). */
    int flags,			/* Flags to pass to nested Tcl_Eval calls. */
    const char **termPtr,	/* Store address of terminating character
				 * here. */
    ParseValue *parsePtr)	/* Information about where to place
				 * fully-substituted result of parse. */
{
    const char *src;
    char *dest, c;
    const char *lastChar = string + strlen(string);

    src = string;
    dest = parsePtr->next;

    for (;;) {
	if (dest == parsePtr->end) {
	    /*
	     * Target buffer space is about to run out.  Make more space.
	     */
	    parsePtr->next = dest;
	    (*parsePtr->expandProc) (parsePtr, 1);
	    dest = parsePtr->next;
	}
	c = *src;
	src++;
	if (c == termChar) {
	    *dest = '\0';
	    parsePtr->next = dest;
	    *termPtr = src;
	    return TCL_OK;
	} else if (CHAR_TYPE(src - 1, lastChar) == TCL_NORMAL) {
	  copy:
	    *dest = c;
	    dest++;
	    continue;
	} else if (c == '$') {
	    int length;
	    const char *value;

	    value = Tcl_ParseVar(interp, src - 1, termPtr);
	    if (value == NULL) {
		return TCL_ERROR;
	    }
	    src = *termPtr;
	    length = strlen(value);
	    if ((parsePtr->end - dest) <= length) {
		parsePtr->next = dest;
		(*parsePtr->expandProc) (parsePtr, length);
		dest = parsePtr->next;
	    }
	    strcpy(dest, value);
	    dest += length;
	    continue;
	} else if (c == '[') {
	    int result;

	    parsePtr->next = dest;
	    result = Blt_ParseNestedCmd(interp, src, flags, termPtr, parsePtr);
	    if (result != TCL_OK) {
		return result;
	    }
	    src = *termPtr;
	    dest = parsePtr->next;
	    continue;
	} else if (c == '\\') {
	    int nRead;

	    src--;
	    *dest = Tcl_Backslash(src, &nRead);
	    dest++;
	    src += nRead;
	    continue;
	} else if (c == '\0') {
	    char buf[10];

	    Tcl_ResetResult(interp);
	    sprintf_s(buf, 10, "missing %c", termChar);
	    Tcl_SetStringObj(Tcl_GetObjResult(interp), buf, 9);
	    *termPtr = string - 1;
	    return TCL_ERROR;
	} else {
	    goto copy;
	}
    }
}