# This file is a Tcl script to test out the "place" command.  It is
# organized in the standard fashion for Tcl tests.
#
# Copyright (c) 1995 Sun Microsystems, Inc.
# Copyright (c) 1998-1999 by Scriptics Corporation.
# All rights reserved.

package require tcltest 2.2
namespace import ::tcltest::*
eval tcltest::configure $argv
tcltest::loadTestedCommands

# Used for constraining memory leak tests
testConstraint memory [llength [info commands memory]]

# XXX - This test file is woefully incomplete.  At present, only a
# few of the features are tested.

# Widgets used in tests 1.* - 8.*
toplevel .t -width 300 -height 200 -bd 0
wm geom .t +0+0
frame .t.f -width 154 -height 84 -bd 2 -relief raised
place .t.f -x 48 -y 38
frame .t.f2 -width 30 -height 60 -bd 2 -relief raised
update

test place-1.1 {Tk_PlaceCmd procedure, "info" option} -setup {
    place forget .t.f2
} -body {
    place .t.f2 -x 0
    place info .t.f2
} -result {-in .t -x 0 -relx 0 -y 0 -rely 0 -width {} -relwidth {} -height {} -relheight {} -anchor nw -bordermode inside}
test place-1.2 {Tk_PlaceCmd procedure, "info" option} -setup {
    place forget .t.f2
} -body {
    place .t.f2 -x 1 -y 2 -width 3 -height 4 -relx 0.1 -rely 0.2 \
        -relwidth 0.3 -relheight 0.4 -anchor se -in .t.f  \
        -bordermode outside
    place info .t.f2
} -result {-in .t.f -x 1 -relx 0.1 -y 2 -rely 0.2 -width 3 -relwidth 0.3 -height 4 -relheight 0.4 -anchor se -bordermode outside}
test place-1.3 {Tk_PlaceCmd procedure, "info" option} -setup {
    place forget .t.f2
    destroy .t.a.b
} -body {
    # Make sure the result is built as a proper list by using a space in parent
    frame ".t.a b"
    place .t.f2 -x 1 -y 2 -width {} -height 4 -relx 0.2 -rely 0.2 \
        -relwidth 0.3 -relheight {} -anchor w -in ".t.a b"  \
        -bordermode ignore
    place info .t.f2
} -cleanup {
    destroy ".t.a.b"
} -result {-in {.t.a b} -x 1 -relx 0.2 -y 2 -rely 0.2 -width {} -relwidth 0.3 -height 4 -relheight {} -anchor w -bordermode ignore}


test place-2.1 {ConfigureSlave procedure, -height option} -body {
    place .t.f2 -height abcd
} -returnCodes error -result {bad screen distance "abcd"}
test place-2.2 {ConfigureSlave procedure, -height option} -setup {
    place forget .t.f2
} -body {
    place .t.f2 -in .t.f -height 40
    update
    winfo height .t.f2
} -result {40}
test place-2.3 {ConfigureSlave procedure, -height option} -setup {
    place forget .t.f2
} -body {
    place .t.f2 -in .t.f -height 120
    update
    place .t.f2 -height {}
    update
    winfo height .t.f2
} -result {60}


test place-3.1 {ConfigureSlave procedure, -relheight option} -body {
    place .t.f2 -relheight abcd
} -returnCodes error -result {expected floating-point number but got "abcd"}
test place-3.2 {ConfigureSlave procedure, -relheight option} -setup {
    place forget .t.f2
} -body {
    place .t.f2 -in .t.f -relheight .5
    update
    winfo height .t.f2
} -result {40}
test place-3.3 {ConfigureSlave procedure, -relheight option} -setup {
    place forget .t.f2
} -body {
    place .t.f2 -in .t.f -relheight .8
    update
    place .t.f2 -relheight {}
    update
    winfo height .t.f2
} -result {60}


test place-4.1 {ConfigureSlave procedure, bad -in options} -setup {
    place forget .t.f2
} -body {
    place .t.f2 -in .t.f2
} -returnCodes error -result {can't place .t.f2 relative to itself}
test place-4.2 {ConfigureSlave procedure, bad -in option} -setup {
    place forget .t.f2
} -body {
    set result [list [winfo manager .t.f2]]
    catch {place .t.f2 -in .t.f2}
    lappend result [winfo manager .t.f2]
} -result {{} {}}
test place-4.3 {ConfigureSlave procedure, bad -in option} -setup {
    place forget .t.f2
} -body {
    winfo manager .t.f2
    place .t.f2 -in .t.f2
} -returnCodes error -result {can't place .t.f2 relative to itself}
test place-4.4 {ConfigureSlave procedure, bad -in option} -setup {
    place forget .t.f2
} -body {
    place .t.f2 -in .
} -returnCodes error -result {can't place .t.f2 relative to .}


test place-5.1 {ConfigureSlave procedure, -relwidth option} -body {
    place .t.f2 -relwidth abcd
} -returnCodes error -result {expected floating-point number but got "abcd"}
test place-5.2 {ConfigureSlave procedure, -relwidth option} -setup {
    place forget .t.f2
} -body {
    place .t.f2 -in .t.f -relwidth .5
    update
    winfo width .t.f2
} -result {75}
test place-5.3 {ConfigureSlave procedure, -relwidth option} -setup {
    place forget .t.f2
} -body {
    place .t.f2 -in .t.f -relwidth .8
    update
    place .t.f2 -relwidth {}
    update
    winfo width .t.f2
} -result {30}

test place-6.1 {ConfigureSlave procedure, -width option} -body {
    place .t.f2 -width abcd
} -returnCodes error -result {bad screen distance "abcd"}
test place-6.2 {ConfigureSlave procedure, -width option} -setup {
    place forget .t.f2
} -body {
    place .t.f2 -in .t.f -width 100
    update
    winfo width .t.f2
} -result {100}
test place-6.3 {ConfigureSlave procedure, -width option} -setup {
    place forget .t.f2
} -body {
    place .t.f2 -in .t.f -width 120
    update
    place .t.f2 -width {}
    update
    winfo width .t.f2
} -result {30}


test place-7.1 {ReconfigurePlacement procedure, computing position} -setup {
    place forget .t.f2
} -body {
    place .t.f2 -in .t.f -x -2 -relx .5 -y 3 -rely .4
    update
    winfo geometry .t.f2
} -result {30x60+123+75}
test place-7.2 {ReconfigurePlacement procedure, position rounding} -setup {
    place forget .t.f2
} -body {
    place .t.f2 -in .t.f -x -1.4 -y -2.3
    update
    winfo geometry .t.f2
} -result {30x60+49+38}
test place-7.3 {ReconfigurePlacement procedure, position rounding} -setup {
    place forget .t.f2
} -body {
    place .t.f2 -in .t.f -x 1.4 -y 2.3
    update
    winfo geometry .t.f2
} -result {30x60+51+42}
test place-7.4 {ReconfigurePlacement procedure, position rounding} -setup {
    place forget .t.f2
} -body {
    place .t.f2 -in .t.f -x -1.6 -y -2.7
    update
    winfo geometry .t.f2
} -result {30x60+48+37}
test place-7.5 {ReconfigurePlacement procedure, position rounding} -setup {
    place forget .t.f2
} -body {
    place .t.f2 -in .t.f -x 1.6 -y 2.7
    update
    winfo geometry .t.f2
} -result {30x60+52+43}
test place-7.6 {ReconfigurePlacement procedure, position rounding} -setup {
    destroy .t.f3
} -body {
    frame .t.f3 -width 100 -height 100 -bg #f00000 -bd 0
    place .t.f3 -x 0 -y 0
    raise .t.f2
    place forget .t.f2
    place .t.f2 -in .t.f3 -relx .303 -rely .406 -relwidth .304 -relheight .206
    update
    winfo geometry .t.f2
} -cleanup {
    destroy .t.f3
} -result {31x20+30+41}
test place-7.7 {ReconfigurePlacement procedure, computing size} -setup {
    place forget .t.f2
} -body {
    place .t.f2 -in .t.f -width 120 -height 89
    update
    list [winfo width .t.f2] [winfo height .t.f2]
} -result {120 89}
test place-7.8 {ReconfigurePlacement procedure, computing size} -setup {
    place forget .t.f2
} -body {
    place .t.f2 -in .t.f -relwidth .4 -relheight .5
    update
    list [winfo width .t.f2] [winfo height .t.f2]
} -result {60 40}
test place-7.9 {ReconfigurePlacement procedure, computing size} -setup {
    place forget .t.f2
} -body {
    place .t.f2 -in .t.f -width 10 -relwidth .4 -height -4 -relheight .5
    update
    list [winfo width .t.f2] [winfo height .t.f2]
} -result {70 36}
test place-7.10 {ReconfigurePlacement procedure, computing size} -setup {
    place forget .t.f2
} -body {
    place .t.f2 -in .t.f -width 10 -relwidth .4 -height -4 -relheight .5
    place .t.f2 -width {} -relwidth {} -height {} -relheight {}
    update
    list [winfo width .t.f2] [winfo height .t.f2]
} -result {30 60}


test place-8.1 {MasterStructureProc, mapping and unmapping slaves} -setup {
    place forget .t.f2
    place forget .t.f
} -body {
    place .t.f2 -relx 1.0 -rely 1.0 -anchor sw
    update
    set result [winfo ismapped .t.f2]
    wm iconify .t
    update
    lappend result [winfo ismapped .t.f2]
    place .t.f2 -x 40 -y 30 -relx 0 -rely 0 -anchor nw
    update
    lappend result [winfo x .t.f2] [winfo y .t.f2] [winfo ismapped .t.f2]
    wm deiconify .t
    update
    lappend result [winfo ismapped .t.f2]
} -result {1 0 40 30 0 1}
test place-8.2 {MasterStructureProc, mapping and unmapping slaves} -setup {
    place forget .t.f2
    place forget .t.f
} -body {
    place .t.f -x 0 -y 0 -width 200 -height 100
    place .t.f2 -in .t.f -relx 1.0 -rely 1.0 -anchor sw -width 50 -height 20
    update
    set result [winfo ismapped .t.f2]
    wm iconify .t
    update
    lappend result [winfo ismapped .t.f2]
    place .t.f2 -x 40 -y 30 -relx 0 -rely 0 -anchor nw
    update
    lappend result [winfo x .t.f2] [winfo y .t.f2] [winfo ismapped .t.f2]
    wm deiconify .t
    update
    lappend result [winfo ismapped .t.f2]
} -result {1 0 42 32 0 1}
destroy .t


test place-9.1 {PlaceObjCmd} -body {
    place
} -returnCodes error -result {wrong # args: should be "place option|pathName args"}
test place-9.2 {PlaceObjCmd} -body {
    place foo
} -returnCodes error -result {wrong # args: should be "place option|pathName args"}
test place-9.3 {PlaceObjCmd} -setup {
    destroy .foo
} -body {
    place .foo bar
} -returnCodes error -result {bad window path name ".foo"}
test place-9.4 {PlaceObjCmd} -setup {
    destroy .foo
} -body {
    place bar .foo
} -cleanup {
    destroy .foo
} -returnCodes error -result {bad window path name ".foo"}
test place-9.5 {PlaceObjCmd} -setup {
    destroy .foo
} -body {
    frame .foo
    place badopt .foo
} -cleanup {
    destroy .foo
} -returnCodes error -result {bad option "badopt": must be configure, forget, info, or slaves}
test place-9.6 {PlaceObjCmd, configure errors} -setup {
    destroy .foo
} -body {
    frame .foo
    place configure .foo
} -cleanup {
    destroy .foo
} -returnCodes ok -result {}
test place-9.7 {PlaceObjCmd, configure errors} -setup {
    destroy .foo
} -body {
    frame .foo
    place configure .foo bar
} -cleanup {
    destroy .foo
} -returnCodes ok -result {}
test place-9.8 {PlaceObjCmd, configure} -setup {
    destroy .foo
} -body {
    frame .foo
    place .foo -x 0 -y 0
    place configure .foo
} -cleanup {
    destroy .foo
} -result [list {-anchor {} {} nw nw} {-bordermode {} {} inside inside} {-height {} {} {} {}} {-in {} {} {} .} {-relheight {} {} {} {}} {-relwidth {} {} {} {}} {-relx {} {} 0 0.0} {-rely {} {} 0 0.0} {-width {} {} {} {}} {-x {} {} 0 0} {-y {} {} 0 0}]
test place-9.9 {PlaceObjCmd, configure} -setup {
    destroy .foo
} -body {
    frame .foo
    place .foo -x 0 -y 0
    place configure .foo -x
} -cleanup {
    destroy .foo
} -result {-x {} {} 0 0}
test place-9.10 {PlaceObjCmd, forget errors} -setup {
    destroy .foo
} -body {
    frame .foo
    place forget .foo bar
} -cleanup {
    destroy .foo
} -returnCodes error -result {wrong # args: should be "place forget pathName"}
test place-9.11 {PlaceObjCmd, info errors} -setup {
    destroy .foo
} -body {
    frame .foo
    place info .foo bar
} -cleanup {
    destroy .foo
} -returnCodes error -result {wrong # args: should be "place info pathName"}
test place-9.12 {PlaceObjCmd, slaves errors} -setup {
    destroy .foo
} -body {
    frame .foo
    place slaves .foo bar
} -cleanup {
    destroy .foo
} -returnCodes error -result {wrong # args: should be "place slaves pathName"}


test place-10.1 {ConfigureSlave} -setup {
    destroy .foo
} -body {
    frame .foo
    place .foo -badopt
} -cleanup {
    destroy .foo
} -returnCodes error -result {unknown option "-badopt"}
test place-10.2 {ConfigureSlave} -setup {
    destroy .foo
} -body {
    frame .foo
    place .foo -anchor
} -cleanup {
    destroy .foo
} -returnCodes error -result {value for "-anchor" missing}
test place-10.3 {ConfigureSlave} -setup {
    destroy .foo
} -body {
    frame .foo
    place .foo -bordermode j
} -cleanup {
    destroy .foo
} -returnCodes error -result {bad bordermode "j": must be inside, outside, or ignore}
test place-10.4 {ConfigureSlave} -setup {
    destroy .foo
} -body {
    frame .foo
    place configure .foo -x 0 -y
} -cleanup {
    destroy .foo
} -returnCodes error -result {value for "-y" missing}
    

test place-11.1 {PlaceObjCmd, slaves command} -setup {
    destroy .foo
} -body {
    frame .foo
    place slaves .foo
} -cleanup {
    destroy .foo
} -result {}
test place-11.2 {PlaceObjCmd, slaves command} -setup {
    destroy .foo .bar
} -body {
    frame .foo
    frame .bar
    place .bar -in .foo
    place slaves .foo
} -cleanup {
    destroy .foo .bar
} -result [list .bar]


test place-12.1 {PlaceObjCmd, forget command} -setup {
    destroy .foo
} -body {
    frame .foo
    place .foo -width 50 -height 50
    update
    set res [winfo ismapped .foo]
    place forget .foo
    update
    lappend res [winfo ismapped .foo]
} -cleanup {
    destroy .foo
} -result {1 0}


test place-13.1 {test respect for internalborder} -setup {
    destroy .pack
} -body {
    toplevel .pack
    wm geometry .pack 200x200
    frame .pack.l -width 15 -height 10
    labelframe .pack.lf -labelwidget .pack.l
    pack .pack.lf -fill both -expand 1
    frame .pack.lf.f
    place .pack.lf.f -x 0 -y 0 -relwidth 1.0 -relheight 1.0
    update
    set res [list [winfo geometry .pack.lf.f]]
    .pack.lf configure -labelanchor e -padx 3 -pady 5
    update
    lappend res [winfo geometry .pack.lf.f]
} -cleanup {
    destroy .pack
} -result {196x188+2+10 177x186+5+7}


test place-14.1 {memory leak testing} -constraints memory -setup {
    destroy .f
    proc getbytes {} {
        set lines [split [memory info] "\n"]
        lindex [lindex $lines 3] 3
    }
    # Repeat each body checking that memory does not increase
    proc stress {args} {
        set res {}
        foreach body $args {
            set end 0
            for {set i 0} {$i < 5} {incr i} {
                uplevel 1 $body
                set tmp $end
                set end [getbytes]
            }
            lappend res [expr {$end - $tmp}]
        }
        return $res
    }
} -body {
    # Test all manners of forgetting a slave
    frame .f
    frame .f.f
    stress {
        place .f.f -x [expr {1 + 1}] -y [expr {2 + 2}]
        place forget .f.f
    } {
        place .f.f -x [expr {1 + 1}] -y [expr {2 + 2}]
        pack .f.f
    } {
        place .f.f -x [expr {1 + 1}] -y [expr {2 + 2}]
        destroy .f
        frame .f
        frame .f.f
    }
} -cleanup {
    destroy .f
    rename getbytes {}
    rename stress {}
} -result {0 0 0}


# cleanup
cleanupTests
return