path: root/win/makefile.vc

# makefile.vc --                                               -*- Makefile -*-
#
# Microsoft Visual C++ makefile for use with nmake.exe v1.62+ (VC++ 5.0+)
#
# This makefile is based upon the Tcl 8.4 Makefile.vc and modified to 
# make it suitable as a general package makefile. Look for the word EDIT
# which marks sections that may need modification. As a minumum you will
# need to change the PROJECT, DOTVERSION and DLLOBJS variables to values
# relevant to your package.
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
# 
# Copyright (c) 1995-1996 Sun Microsystems, Inc.
# Copyright (c) 1998-2000 Ajuba Solutions.
# Copyright (c) 2001 ActiveState Corporation.
# Copyright (c) 2001-2002 David Gravereaux.
# Copyright (c) 2003 Pat Thoyts
# Copyright (c) 2004 Zveno Pty Ltd
#
#-------------------------------------------------------------------------
# RCS: @(#)$Id: makefile.vc,v 1.1.1.1 2009/01/16 22:11:49 joye Exp $
#-------------------------------------------------------------------------

!if "$(MSVCDIR)" == ""
MSG = ^
You will need to run vcvars32.bat from Developer Studio, first, to setup^
the environment.  Jump to this line to read the new instructions.
!error $(MSG)
!endif

#------------------------------------------------------------------------------
# HOW TO USE this makefile:
#
# 1)  It is now necessary to have %MSVCDir% set in the environment.  This is
#     used  as a check to see if vcvars32.bat had been run prior to running
#     nmake or during the installation of Microsoft Visual C++, MSVCDir had
#     been set globally and the PATH adjusted.  Either way is valid.
#
#     You'll need to run vcvars32.bat contained in the MsDev's vc(98)/bin
#     directory to setup the proper environment, if needed, for your current
#     setup.  This is a needed bootstrap requirement and allows the swapping of
#     different environments to be easier.
#
# 2)  To use the Platform SDK (not expressly needed), run setenv.bat after
#     vcvars32.bat according to the instructions for it.  This can also turn on
#     the 64-bit compiler, if your SDK has it.
#
# 3)  Targets are:
#	all       -- Builds everything.
#       <project> -- Builds the project (eg: nmake sample)
#	test      -- Builds and runs the test suite.
#	install   -- Installs the built binaries and libraries to $(INSTALLDIR)
#		     in an appropriate subdirectory.
#	clean/realclean/distclean -- varying levels of cleaning.
#
# 4)  Macros usable on the commandline:
#	INSTALLDIR=<path>
#		Sets where to install Tcl from the built binaries.
#		C:\Progra~1\Tcl is assumed when not specified.
#
#	OPTS=static,msvcrt,staticpkg,threads,symbols,profile,loimpact,none
#		Sets special options for the core.  The default is for none.
#		Any combination of the above may be used (comma separated).
#		'none' will over-ride everything to nothing.
#
#		static  =  Builds a static library of the core instead of a
#			   dll.  The shell will be static (and large), as well.
#		msvcrt  =  Effects the static option only to switch it from
#			   using libcmt(d) as the C runtime [by default] to
#			   msvcrt(d). This is useful for static embedding
#			   support.
#		staticpkg = Effects the static option only to switch
#			   tclshXX.exe to have the dde and reg extension linked
#			   inside it.
#		threads =  Turns on full multithreading support.
#		thrdalloc = Use the thread allocator (shared global free pool).
#		symbols =  Adds symbols for step debugging.
#		profile =  Adds profiling hooks.  Map file is assumed.
#		loimpact =  Adds a flag for how NT treats the heap to keep memory
#			   in use, low.  This is said to impact alloc performance.
#
#	STATS=memdbg,compdbg,none
#		Sets optional memory and bytecode compiler debugging code added
#		to the core.  The default is for none.  Any combination of the
#		above may be used (comma separated).  'none' will over-ride
#		everything to nothing.
#
#		memdbg   = Enables the debugging memory allocator.
#		compdbg  = Enables byte compilation logging.
#
#	MACHINE=(IX86|IA64|ALPHA)
#		Set the machine type used for the compiler, linker, and
#		resource compiler.  This hook is needed to tell the tools
#		when alternate platforms are requested.  IX86 is the default
#		when not specified.
#
#	TMP_DIR=<path>
#	OUT_DIR=<path>
#		Hooks to allow the intermediate and output directories to be
#		changed.  $(OUT_DIR) is assumed to be 
#		$(BINROOT)\(Release|Debug) based on if symbols are requested.
#		$(TMP_DIR) will de $(OUT_DIR)\<buildtype> by default.
#
#	TESTPAT=<file>
#		Reads the tests requested to be run from this file.
#
#	CFG_ENCODING=encoding
#		name of encoding for configuration information. Defaults
#		to cp1252
#
# 5)  Examples:
#
#	Basic syntax of calling nmake looks like this:
#	nmake [-nologo] -f makefile.vc [target|macrodef [target|macrodef] [...]]
#
#                        Standard (no frills)
#       c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
#       Setting environment for using Microsoft Visual C++ tools.
#       c:\tcl_src\win\>nmake -f makefile.vc all
#       c:\tcl_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl
#
#                         Building for Win64
#       c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
#       Setting environment for using Microsoft Visual C++ tools.
#       c:\tcl_src\win\>c:\progra~1\platfo~1\setenv.bat /pre64 /RETAIL
#       Targeting Windows pre64 RETAIL
#       c:\tcl_src\win\>nmake -f makefile.vc MACHINE=IA64
#
#------------------------------------------------------------------------------
#==============================================================================
###############################################################################
#------------------------------------------------------------------------------

!if !exist("makefile.vc")
MSG = ^
You must run this makefile only from the directory it is in.^
Please `cd` to its location first.
!error $(MSG)
!endif

#-------------------------------------------------------------------------
# Project specific information (EDIT)
#
# You should edit this with the name and version of your project. This
# information is used to generate the name of the package library and
# it's install location.
#
# For example, the sample extension is  going to build sample04.dll and
# would install it into $(INSTALLDIR)\lib\sample04
#
# You need to specify the object files that need to be linked into your
# binary here.
#
#-------------------------------------------------------------------------

PROJECT = Tclxml
!include "rules.vc"

DOTVERSION      = 3.1
VERSION         = $(DOTVERSION:.=)
STUBPREFIX      = $(PROJECT)stub

#-- Use this line for VC++ 6.0
#WSOCKLIB = "C:\Program Files\Microsoft Visual Studio\VC98\Lib\WSOCK32.LIB"
#-- Use this line for VC++ .NET 2003
WSOCKLIB = "C:\Program Files\Microsoft Visual Studio .NET 2003\Vc7\PlatformSDK\Lib\WSOCK32.LIB"

DLLOBJS = \
	$(TMP_DIR)\tclxml.obj
PRJSTUBOBJS = \
	$(TMP_DIR)\tclxmlStubInit.obj \
	$(TMP_DIR)\tclxmlStubLib.obj
EXPATDLLOBJS = \
	$(TMP_DIR)\tclexpat.obj \
	$(TMP_DIR)\xmltok.obj \
	$(TMP_DIR)\xmlrole.obj \
	$(TMP_DIR)\xmlwf.obj \
	$(TMP_DIR)\xmlfile.obj \
	$(TMP_DIR)\codepage.obj \
	$(TMP_DIR)\hashtable.obj \
	$(TMP_DIR)\win32filemap.obj \
	$(TMP_DIR)\xmlparse.obj
LIBXML2DLLOBJS = \
	$(TMP_DIR)\tcllibxml2.obj \
	$(TMP_DIR)\docObj.obj
LIBXML2STUBOBJS = \
	$(TMP_DIR)\tcllibxml2StubInit.obj

#-------------------------------------------------------------------------
# Target names and paths ( shouldn't need changing )
#-------------------------------------------------------------------------

BINROOT		= .
ROOT            = ..

PRJIMPLIB	= $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib
PRJLIBNAME	= $(PROJECT)$(VERSION)$(SUFX).$(EXT)
PRJLIB		= $(OUT_DIR)\$(PRJLIBNAME)

PRJSTUBLIBNAME	= $(STUBPREFIX)$(VERSION).lib
PRJSTUBLIB	= $(OUT_DIR)\$(PRJSTUBLIBNAME)

EXPATIMPLIB     = $(OUT_DIR)\expat$(VERSION)$(SUFX).lib
EXPATLIBNAME    = expat$(VERSION)$(SUFX).$(EXT)
EXPATLIB        = $(OUT_DIR)\$(EXPATLIBNAME)

EXPATSTUBLIBNAME = expatstub$(VERSION).lib
EXPATSTUBLIB    = $(OUT_DIR)\$(EXPATSTUBLIBNAME)

LIBXML2IMPLIB   = $(OUT_DIR)\tcllibxml2$(VERSION)$(SUFX).lib
LIBXML2LIBNAME  = tcllibxml2$(VERSION)$(SUFX).$(EXT)
LIBXML2LIB      = $(OUT_DIR)\$(LIBXML2LIBNAME)

LIBXML2STUBLIBNAME = tcllibxml2stub$(VERSION).lib
LIBXML2STUBLIB  = $(OUT_DIR)\$(LIBXML2STUBLIBNAME)

### Make sure we use backslash only.
LIB_INSTALL_DIR		= $(_INSTALLDIR)\lib
BIN_INSTALL_DIR		= $(_INSTALLDIR)\bin
DOC_INSTALL_DIR		= $(_INSTALLDIR)\doc
SCRIPT_INSTALL_DIR	= $(_INSTALLDIR)\lib\$(PROJECT)$(DOTVERSION)
EXPAT_INSTALL_DIR       = $(_INSTALLDIR)\lib\Tclexpat$(DOTVERSION)
LIBXML2_INSTALL_DIR     = $(_INSTALLDIR)\lib\Tcllibxml$(DOTVERSION)
INCLUDE_INSTALL_DIR	= $(_INSTALLDIR)\include

### The following paths CANNOT have spaces in them.
GENERICDIR	= $(ROOT)
EXPATDIR        = $(ROOT)\expat
TCLLIBXML2DIR   = $(ROOT)\libxml2
WINDIR		= $(ROOT)\win
LIBDIR          = $(ROOT)\library
DOCDIR		= $(ROOT)\doc
TOOLSDIR	= $(ROOT)\tools
COMPATDIR	= $(ROOT)\compat
INCLUDEDIR      = $(ROOT)\include

### Find a tclsh for testing and installation.
!if !exist("$(TCLSH)")
TCLSH           = $(BIN_INSTALL_DIR)\tclsh$(TCL_VERSION).exe
!endif

#---------------------------------------------------------------------
# Compile flags
#---------------------------------------------------------------------

!if !$(DEBUG)
!if $(OPTIMIZING)
### This cranks the optimization level to maximize speed
cdebug	= -O2 -Op -Gs
!else
cdebug	=
!endif
!else if "$(MACHINE)" == "IA64"
### Warnings are too many, can't support warnings into errors.
cdebug	= -Z7 -Od
!else
cdebug	= -Z7 -WX -Od
!endif

### Declarations common to all compiler options
cflags = -nologo -c -W3 -YX -Fp$(TMP_DIR)^\

!if $(PENT_0F_ERRATA)
cflags = $(cflags) -QI0f
!endif

!if $(ITAN_B_ERRATA)
cflags = $(cflags) -QIA64_Bx
!endif

!if $(MSVCRT)
!if $(DEBUG)
crt = -MDd
!else
crt = -MD
!endif
!else
!if $(DEBUG)
crt = -MTd
!else
crt = -MT
!endif
!endif

#----------------------------------------------------------
# TclXML/libxml2 needs libz, libiconv and libxml2 headers
#----------------------------------------------------------

!if !defined(LIBZDIR)
MSG=^
Don't know where libz is.  Set the LIBZDIR macro.
!error $(MSG)
!else
_LIBZDIR = $(LIBZDIR:/=\)
!if !exist("$(_LIBZDIR)\include\zlib.h")
MSG=^
Don't know where zlib.h is.  The LIBZDIR macro doesn't appear to be correct.
!error $(MSG)
!endif
!endif

!if !defined(LIBICONVDIR)
MSG=^
Don't know where libiconv is.  Set the LIBICONVDIR macro.
!error $(MSG)
!else
_LIBICONVDIR = $(LIBICONVDIR:/=\)
!if !exist("$(_LIBICONVDIR)\include\iconv.h")
MSG=^
Don't know where iconv.h is.  The LIBICONVDIR macro doesn't appear to be correct.
!error $(MSG)
!endif
!endif

!if !defined(LIBXML2DIR)
MSG=^
Don't know where libxml2 is.  Set the LIBXML2DIR macro.
!error $(MSG)
!else
_LIBXML2DIR = $(LIBXML2DIR:/=\)
!if !exist("$(_LIBXML2DIR)\include\libxml\tree.h")
MSG=^
Don't know where libxml2 tree.h is.  The LIBXML2DIR macro doesn't appear to be correct.
!error $(MSG)
!endif
!endif

TCL_INCLUDES	= -I"$(TCLDIR)\include" -I"$(WINDIR)" -I"$(GENERICDIR)"
EXPAT_INCLUDES  = -I"$(EXPATDIR)\xmlparse" -I"$(EXPATDIR)\xmltok"
LIBXML2_INCLUDES = -I"$(LIBZDIR)\include" -I"$(LIBICONVDIR)\include" -I"$(LIBXML2DIR)\include"
BASE_CLFAGS	= $(cflags) $(cdebug) $(crt) $(TCL_INCLUDES) -I"..\include"
CON_CFLAGS	= $(cflags) $(cdebug) $(crt) -DCONSOLE
TCL_CFLAGS	= -DUSE_TCL_STUBS -DVERSION="\"$(DOTVERSION)\"" $(BASE_CLFAGS) $(OPTDEFINES)
LIBXML2_CFLAGS  = -DTCLXML_LIBXML2_VERSION="\"$(DOTVERSION)\""

#---------------------------------------------------------------------
# Link flags
#---------------------------------------------------------------------

!if $(DEBUG)
ldebug	= -debug:full -debugtype:cv
!else
ldebug	= -release -opt:ref -opt:icf,3
!endif

### Declarations common to all linker options
lflags	= -nologo -machine:$(MACHINE) $(ldebug)

!if $(PROFILE)
lflags	= $(lflags) -profile
!endif

!if $(ALIGN98_HACK) && !$(STATIC_BUILD)
### Align sections for PE size savings.
lflags	= $(lflags) -opt:nowin98
!else if !$(ALIGN98_HACK) && $(STATIC_BUILD)
### Align sections for speed in loading by choosing the virtual page size.
lflags	= $(lflags) -align:4096
!endif

!if $(LOIMPACT)
lflags	= $(lflags) -ws:aggressive
!endif

dlllflags = $(lflags) -dll
conlflags = $(lflags) -subsystem:console
guilflags = $(lflags) -subsystem:windows
baselibs   = $(TCLSTUBLIB)

#---------------------------------------------------------------------
# TclTest flags
#---------------------------------------------------------------------

!IF "$(TESTPAT)" != ""
TESTFLAGS = -file $(TESTPAT)
!ENDIF

#---------------------------------------------------------------------
# Project specific targets (EDIT)
#---------------------------------------------------------------------

all:	    setup $(PROJECT)
$(PROJECT): setup $(PRJLIB) $(EXPATLIB) $(LIBXML2LIB)
install:    install-binaries install-includes install-libraries install-docs


test: setup $(PROJECT)
	set TCL_LIBRARY=$(ROOT)/library
!if "$(OS)" == "Windows_NT"  || "$(MSVCDIR)" == "IDE"
	$(TCLSH) "$(ROOT)/tests/all.tcl" $(TESTFLAGS)
!else
	@echo Please wait while the tests are collected...
	$(TCLSH) "$(ROOT)/tests/all.tcl" $(TESTFLAGS) > tests.log
	type tests.log | more
!endif

setup:
	@if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR)
	@if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR)

$(PRJLIB): $(DLLOBJS) $(PRJSTUBOBJS)
	$(link32) $(dlllflags) -out:$@ $(baselibs) $(DLLOBJS) $(PRJSTUBOBJS)
	-@del $*.exp

$(EXPATLIB): $(EXPATDLLOBJS)
	$(link32) $(dlllflags) -out:$@ $(baselibs) $(PRJIMPLIB) @<<
$**
<<
	-@del $*.exp

$(LIBXML2LIB): $(LIBXML2DLLOBJS)
	$(link32) $(dlllflags) -out:$@ $(baselibs) $(PRJIMPLIB) $(LIBZDIR)\lib\zlib.lib $(LIBICONVDIR)\lib\iconv.lib $(LIBXML2DIR)\lib\libxml2.lib $(WSOCKLIB) @<<
$**
<<
	-@del $*.exp

$(PRJSTUBLIB): $(PRJSTUBOBJS)
	$(lib32) -nologo -out:$@ $(PRJSTUBOBJS)
$(EXPATSTUBLIB): $(EXPATSTUBOBJS)
	$(lib32) -nologo -out:$@ $(EXPATSTUBOBJS)
$(LIBXML2STUBLIB): $(LIBXML2STUBOBJS)
	$(lib32) -nologo -out:$@ $(LIBXML2STUBOBJS)

#---------------------------------------------------------------------
# Special case object file targets
#---------------------------------------------------------------------

$(TMP_DIR)\tclxml.obj: $(GENERICDIR)\tclxml.c
    $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$@ $?

$(TMP_DIR)\tclexpat.obj: $(GENERICDIR)\tclexpat.c
    $(cc32) $(TCL_CFLAGS) $(EXPAT_INCLUDES) -DBUILD_$(PROJECT) -Fo$@ $?

$(TMP_DIR)\xmltok.obj: $(EXPATDIR)\xmltok\xmltok.c
    $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$@ $?

$(TMP_DIR)\xmlrole.obj: $(EXPATDIR)\xmltok\xmlrole.c
    $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$@ $?

$(TMP_DIR)\xmlwf.obj: $(EXPATDIR)\xmlwf\xmlwf.c
    $(cc32) $(TCL_CFLAGS) $(EXPAT_INCLUDES) -DBUILD_$(PROJECT) -Fo$@ $?

$(TMP_DIR)\xmlfile.obj: $(EXPATDIR)\xmlwf\xmlfile.c
    $(cc32) $(TCL_CFLAGS) $(EXPAT_INCLUDES) -DBUILD_$(PROJECT) -Fo$@ $?

$(TMP_DIR)\codepage.obj: $(EXPATDIR)\xmlwf\codepage.c
    $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$@ $?

$(TMP_DIR)\hashtable.obj: $(EXPATDIR)\xmlparse\hashtable.c
    $(cc32) $(TCL_CFLAGS) $(EXPAT_INCLUDES) -DBUILD_$(PROJECT) -Fo$@ $?

$(TMP_DIR)\win32filemap.obj: $(EXPATDIR)\xmlwf\win32filemap.c
    $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$@ $?

$(TMP_DIR)\xmlparse.obj: $(EXPATDIR)\xmlparse\xmlparse.c
    $(cc32) $(TCL_CFLAGS) $(EXPAT_INCLUDES) -DBUILD_$(PROJECT) -Fo$@ $?

$(TMP_DIR)\tcllibxml2.obj: $(TCLLIBXML2DIR)\tcllibxml2.c
    $(cc32) $(TCL_CFLAGS) $(LIBXML2_CFLAGS) $(LIBXML2_INCLUDES) -DBUILD_TclXML_libxml2 -Fo$@ $?

$(TMP_DIR)\docObj.obj: $(TCLLIBXML2DIR)\docObj.c
    $(cc32) $(TCL_CFLAGS) $(LIBXML2_CFLAGS) $(LIBXML2_INCLUDES) -DBUILD_TclXML_libxml2 -Fo$@ $?

$(TMP_DIR)\tcllibxml2StubInit.obj: $(TCLLIBXML2DIR)\tcllibxml2StubInit.c
    $(cc32) $(TCL_CFLAGS) $(LIBXML2_CFLAGS) $(LIBXML2_INCLUDES) -DBUILD_TclXML_libxml2 -Fo$@ $?

#---------------------------------------------------------------------
# Implicit rules
#---------------------------------------------------------------------

{$(WINDIR)}.c{$(TMP_DIR)}.obj::
    $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
$<
<<

{$(GENERICDIR)}.c{$(TMP_DIR)}.obj::
    $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
$<
<<

{$(COMPATDIR)}.c{$(TMP_DIR)}.obj::
    $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
$<
<<

{$(WINDIR)}.rc{$(TMP_DIR)}.res:
	$(rc32) -fo $@ -r -i "$(GENERICDIR)" -D__WIN32__ \
!if $(DEBUG)
	-d DEBUG \
!endif
!if $(TCL_THREADS)
	-d TCL_THREADS \
!endif
!if $(STATIC_BUILD)
	-d STATIC_BUILD \
!endif
	$<

.SUFFIXES:
.SUFFIXES:.c .rc

#---------------------------------------------------------------------
# Installation. (EDIT)
#
# You may need to modify this section to reflect the final distribution
# of your files and possibly to generate documentation.
#
#---------------------------------------------------------------------

install-binaries: install-tclxml-binaries install-expat-binaries install-libxml2-binaries
	@echo Installing to '$(SCRIPT_INSTALL_DIR)'

install-tclxml-binaries:
	@if not exist $(SCRIPT_INSTALL_DIR)\nul mkdir $(SCRIPT_INSTALL_DIR)
	$(CPY) $(PRJLIB) $(SCRIPT_INSTALL_DIR)
	$(CPY) $(PRJIMPLIB) $(SCRIPT_INSTALL_DIR)

install-expat-binaries:
	@if not exist $(EXPAT_INSTALL_DIR)\nul mkdir $(EXPAT_INSTALL_DIR)
	$(CPY) $(EXPATLIB) $(EXPAT_INSTALL_DIR)
	$(CPY) $(EXPATIMPLIB) $(EXPAT_INSTALL_DIR)
	@echo package ifneeded xml::expat $(DOTVERSION)  [list load [file join $$dir $(EXPATLIBNAME)]] > $(EXPAT_INSTALL_DIR)\pkgIndex.tcl

install-libxml2-binaries:
	@if not exist $(LIBXML2_INSTALL_DIR)\nul mkdir $(LIBXML2_INSTALL_DIR)
	$(CPY) $(LIBXML2LIB) $(LIBXML2_INSTALL_DIR)
	$(CPY) $(LIBXML2IMPLIB) $(LIBXML2_INSTALL_DIR)
	@echo package ifneeded xml::libxml2 $(DOTVERSION)  [list load [file join $$dir $(LIBXML2LIBNAME)] Tclxml_libxml2] > $(LIBXML2_INSTALL_DIR)\pkgIndex.tcl

install-includes: install-tclxml-includes install-expat-includes install-libxml2-includes
	@echo Installing to '$(INCLUDE_INSTALL_DIR)'
	@if not exist $(INCLUDE_INSTALL_DIR)\nul mkdir $(INCLUDE_INSTALL_DIR)

install-tclxml-includes:
	@if not exist $(INCLUDE_INSTALL_DIR)\tclxml\nul mkdir $(INCLUDE_INSTALL_DIR)\tclxml
	$(CPY) $(INCLUDEDIR)\tclxml\*.h $(INCLUDE_INSTALL_DIR)\tclxml

install-expat-includes:

install-libxml2-includes:
	@if not exist $(INCLUDE_INSTALL_DIR)\tclxml-libxml2\nul mkdir $(INCLUDE_INSTALL_DIR)\tclxml-libxml2
	$(CPY) $(INCLUDEDIR)\tclxml-libxml2\*.h $(INCLUDE_INSTALL_DIR)\tclxml-libxml2

install-libraries:
	@echo Installing to '$(SCRIPT_INSTALL_DIR)'
	@if exist $(LIBDIR)\nul $(CPY) $(LIBDIR)\*.tcl $(SCRIPT_INSTALL_DIR)
	$(TCLSH) $(WINDIR)\mkPkgIndex.tcl $(LIBDIR)\pkgIndex.tcl.in $(SCRIPT_INSTALL_DIR)\pkgIndex.tcl VERSION=$(DOTVERSION) Tclxml_LIB_FILE=$(PRJLIBNAME)

install-docs:

#---------------------------------------------------------------------
# Clean up
#---------------------------------------------------------------------

clean:
	@if exist $(TMP_DIR)\nul $(RMDIR) $(TMP_DIR)

realclean: clean
	@if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR)

distclean: realclean
	@if exist $(WINDIR)\nmakehlp.exe del $(WINDIR)\nmakehlp.exe
	@if exist $(WINDIR)\nmakehlp.obj del $(WINDIR)\nmakehlp.obj