summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorAndrew M. Kuchling <amk@amk.ca>2001-01-17 18:55:13 (GMT)
committerAndrew M. Kuchling <amk@amk.ca>2001-01-17 18:55:13 (GMT)
commit3712d396ac787232a41e7b14410072f455c4c97e (patch)
tree53e91affbd7ace3f85fe0426277184a03f66db10
parentba77fc8cf093722b2905963f263fb572ebdb38df (diff)
downloadcpython-3712d396ac787232a41e7b14410072f455c4c97e.zip
cpython-3712d396ac787232a41e7b14410072f455c4c97e.tar.gz
cpython-3712d396ac787232a41e7b14410072f455c4c97e.tar.bz2
Patch #102588 / PEP 229:
The final piece of this change... Strip down Setup.config.in and Setup.dist to the minimal sets required to get a working Python; setup.py will handle the rest
-rw-r--r--Modules/Setup.config.in28
-rw-r--r--Modules/Setup.dist371
2 files changed, 7 insertions, 392 deletions
diff --git a/Modules/Setup.config.in b/Modules/Setup.config.in
index 2932d3c..b9b7a1e 100644
--- a/Modules/Setup.config.in
+++ b/Modules/Setup.config.in
@@ -9,29 +9,5 @@
# Threading
@USE_THREAD_MODULE@thread threadmodule.c
-# You may want the following to be built as statically loaded modules;
-# comment out the *shared* line in that case:
-
-*shared*
-
-# Readline
-@USE_READLINE_MODULE@readline readline.c -lreadline -ltermcap
-
-# The ncurses library, under Linux
-@USE_NCURSES_MODULE@_curses _cursesmodule.c -lncurses -ltermcap
-
-# bsddb(3) module enabled by --with-libdb or presence of db.h
-@USE_BSDDB_MODULE@bsddb bsddbmodule.c @HAVE_LIBDB@
-
-# dbm(3) may require -lndbm or similar
-@USE_DBM_MODULE@dbm dbmmodule.c @HAVE_LIBNDBM@
-
-# ndbm(3) may require -lndbm or similar
-@USE_NDBM_MODULE@ndbm ndbmmodule.c @HAVE_LIBNDBM@
-
-# gdbm(3) may require -lgdbm or similar
-@USE_GDBM_MODULE@gdbm gdbmmodule.c @HAVE_LIBGDBM@
-
-# crypt(3) may require -lcrypt or similar
-@USE_CRYPT_MODULE@crypt cryptmodule.c @HAVE_LIBCRYPT@
-
+# The rest of the modules previously listed in this file are built
+# by the setup.py script in Python 2.1.
diff --git a/Modules/Setup.dist b/Modules/Setup.dist
index 3ada281..59aa6e7 100644
--- a/Modules/Setup.dist
+++ b/Modules/Setup.dist
@@ -87,373 +87,12 @@ PYTHONPATH=$(COREPYTHONPATH)
# various reasons; therefore they are listed here instead of in the
# normal order.
-# Some modules that are normally always on:
+# This only contains the minimal set of modules required to run the
+# setup.py script in the root of the Python source tree.
-regex regexmodule.c regexpr.c # Regular expressions, GNU Emacs style
-pcre pcremodule.c pypcre.c # Regular expressions, Perl style (for re.py)
posix posixmodule.c # posix (UNIX) system calls
-signal signalmodule.c # signal(2)
_sre _sre.c # Fredrik Lundh's new regular expressions
+strop stropmodule.c # fast string operations implemented in C
-# The SGI specific GL module:
-
-GLHACK=-Dclear=__GLclear
-#gl glmodule.c cgensupport.c -I$(srcdir) $(GLHACK) -lgl -lX11
-
-# Pure module. Cannot be linked dynamically.
-# -DWITH_QUANTIFY, -DWITH_PURIFY, or -DWITH_ALL_PURE
-#WHICH_PURE_PRODUCTS=-DWITH_ALL_PURE
-#PURE_INCLS=-I/usr/local/include
-#PURE_STUBLIBS=-L/usr/local/lib -lpurify_stubs -lquantify_stubs
-#pure puremodule.c $(WHICH_PURE_PRODUCTS) $(PURE_INCLS) $(PURE_STUBLIBS)
-
-# Uncommenting the following line tells makesetup that all following
-# modules are to be built as shared libraries (see above for more
-# detail; also note that *static* reverses this effect):
-
-#*shared*
-
-# GNU readline. Unlike previous Python incarnations, GNU readline is
-# now incorporated in an optional module, configured in the Setup file
-# instead of by a configure script switch. You may have to insert a
-# -L option pointing to the directory where libreadline.* lives,
-# and you may have to change -ltermcap to -ltermlib or perhaps remove
-# it, depending on your system -- see the GNU readline instructions.
-# It's okay for this to be a shared library, too.
-#
-# First, look at Setup.config; configure may have set this for you.
-
-#readline readline.c -lreadline -ltermcap
-
-
-# Modules that should always be present (non UNIX dependent):
-
-array arraymodule.c # array objects
-cmath cmathmodule.c # -lm # complex math library functions
-math mathmodule.c # -lm # math library functions, e.g. sin()
-strop stropmodule.c # fast string operations implemented in C
-struct structmodule.c # binary structure packing/unpacking
-time timemodule.c # -lm # time operations and variables
-operator operator.c # operator.add() and similar goodies
-_codecs _codecsmodule.c # access to the builtin codecs and codec registry
-
-unicodedata unicodedata.c unicodedatabase.c
- # static Unicode character database
-ucnhash ucnhash.c # Unicode Character Name expansion hash table
-
-_locale _localemodule.c # access to ISO C locale support
-
-
-# Modules with some UNIX dependencies -- on by default:
-# (If you have a really backward UNIX, select and socket may not be
-# supported...)
-
-fcntl fcntlmodule.c # fcntl(2) and ioctl(2)
-pwd pwdmodule.c # pwd(3)
-grp grpmodule.c # grp(3)
-errno errnomodule.c # posix (UNIX) errno values
-select selectmodule.c # select(2); not on ancient System V
-
-# Memory-mapped files (also works on Win32).
-mmap mmapmodule.c
-
-# Dynamic readlines
-xreadlines xreadlinesmodule.c
-
-# for socket(2), without SSL support.
-_socket socketmodule.c
-
-# Socket module compiled with SSL support; you must comment out the other
-# socket line above, and possibly edit the SSL variable:
-#SSL=/usr/local/ssl
-#_socket socketmodule.c \
-# -DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl \
-# -L$(SSL)/lib -lssl -lcrypto
-
-# The crypt module is now disabled by default because it breaks builds
-# on many systems (where -lcrypt is needed), e.g. Linux (I believe).
-#
-# First, look at Setup.config; configure may have set this for you.
-
-#crypt cryptmodule.c # -lcrypt # crypt(3); needs -lcrypt on some systems
-
-
-# Some more UNIX dependent modules -- off by default, since these
-# are not supported by all UNIX systems:
-
-#nis nismodule.c -lnsl # Sun yellow pages -- not everywhere
-#termios termios.c # Steen Lumholt's termios module
-#resource resource.c # Jeremy Hylton's rlimit interface
-
-
-# Multimedia modules -- off by default.
-# These don't work for 64-bit platforms!!!
-# These represent audio samples or images as strings:
-
-#audioop audioop.c # Operations on audio samples
-#imageop imageop.c # Operations on images
-#rgbimg rgbimgmodule.c # Read SGI RGB image files (but coded portably)
-
-
-# The md5 module implements the RSA Data Security, Inc. MD5
-# Message-Digest Algorithm, described in RFC 1321. The necessary files
-# md5c.c and md5.h are included here.
-
-md5 md5module.c md5c.c
-
-
-# The sha module implements the SHA checksum algorithm.
-# (NIST's Secure Hash Algorithm.)
-sha shamodule.c
-
-
-# The mpz module interfaces to the GNU Multiple Precision library.
-# You need to ftp the GNU MP library.
-# The GMP variable must point to the GMP source directory.
-# This was originally written and tested against GMP 1.2 and 1.3.2.
-# It has been modified by Rob Hooft to work with 2.0.2 as well, but I
-# haven't tested it recently.
-
-# A compatible MP library unencombered by the GPL also exists. It was
-# posted to comp.sources.misc in volume 40 and is widely available from
-# FTP archive sites. One URL for it is:
-# ftp://gatekeeper.dec.com/.b/usenet/comp.sources.misc/volume40/fgmp/part01.Z
-
-#GMP=/ufs/guido/src/gmp
-#mpz mpzmodule.c -I$(GMP) $(GMP)/libgmp.a
-
-
-# SGI IRIX specific modules -- off by default.
-
-# These module work on any SGI machine:
-
-# *** gl must be enabled higher up in this file ***
-#fm fmmodule.c $(GLHACK) -lfm -lgl # Font Manager
-#sgi sgimodule.c # sgi.nap() and a few more
-
-# This module requires the header file
-# /usr/people/4Dgifts/iristools/include/izoom.h:
-#imgfile imgfile.c -limage -lgutil -lgl -lm # Image Processing Utilities
-
-
-# These modules require the Multimedia Development Option (I think):
-
-#al almodule.c -laudio # Audio Library
-#cd cdmodule.c -lcdaudio -lds -lmediad # CD Audio Library
-#cl clmodule.c -lcl -lawareaudio # Compression Library
-#sv svmodule.c yuvconvert.c -lsvideo -lXext -lX11 # Starter Video
-
-
-# The FORMS library, by Mark Overmars, implements user interface
-# components such as dialogs and buttons using SGI's GL and FM
-# libraries. You must ftp the FORMS library separately from
-# ftp://ftp.cs.ruu.nl/pub/SGI/FORMS. It was tested with FORMS 2.2a.
-# NOTE: if you want to be able to use FORMS and curses simultaneously
-# (or both link them statically into the same binary), you must
-# compile all of FORMS with the cc option "-Dclear=__GLclear".
-
-# The FORMS variable must point to the FORMS subdirectory of the forms
-# toplevel directory:
-
-#FORMS=/ufs/guido/src/forms/FORMS
-#fl flmodule.c -I$(FORMS) $(GLHACK) $(FORMS)/libforms.a -lfm -lgl
-
-
-# SunOS specific modules -- off by default:
-
-#sunaudiodev sunaudiodev.c
-
-
-# Linux specific modules -- off by default:
-
-#linuxaudiodev linuxaudiodev.c
-
-
-# George Neville-Neil's timing module:
-
-#timing timingmodule.c
-
-
-# The _tkinter module.
-#
-# The TKPATH variable is always enabled, to save you the effort.
-TKPATH=:lib-tk
-
-# The command for _tkinter is long and site specific. Please
-# uncomment and/or edit those parts as indicated. If you don't have a
-# specific extension (e.g. Tix or BLT), leave the corresponding line
-# commented out. (Leave the trailing backslashes in! If you
-# experience strange errors, you may want to join all uncommented
-# lines and remove the backslashes -- the backslash interpretation is
-# done by the shell's "read" command and it may not be implemented on
-# every system.
-
-# *** Always uncomment this (leave the leading underscore in!):
-# _tkinter _tkinter.c tkappinit.c -DWITH_APPINIT \
-# *** Uncomment and edit to reflect where your Tcl/Tk headers are:
-# -I/usr/local/include \
-# *** Uncomment and edit to reflect where your X11 header files are:
-# -I/usr/X11R6/include \
-# *** Or uncomment this for Solaris:
-# -I/usr/openwin/include \
-# *** Uncomment and edit for Tix extension only:
-# -DWITH_TIX -ltix4.1.8.0 \
-# *** Uncomment and edit for BLT extension only:
-# -DWITH_BLT -I/usr/local/blt/blt8.0-unoff/include -lBLT8.0 \
-# *** Uncomment and edit for PIL (TkImaging) extension only:
-# (See http://www.pythonware.com/products/pil/ for more info)
-# -DWITH_PIL -I../Extensions/Imaging/libImaging tkImaging.c \
-# *** Uncomment and edit for TOGL extension only:
-# -DWITH_TOGL togl.c \
-# *** Uncomment and edit to reflect where your Tcl/Tk libraries are:
-# -L/usr/local/lib \
-# *** Uncomment and edit to reflect your Tcl/Tk versions:
-# -ltk8.0 -ltcl8.0 \
-# *** Uncomment and edit to reflect where your X11 libraries are:
-# -L/usr/X11R6/lib \
-# *** Or uncomment this for Solaris:
-# -L/usr/openwin/lib \
-# *** Uncomment these for TOGL extension only:
-# -lGL -lGLU -lXext -lXmu \
-# *** Uncomment for AIX:
-# -lld \
-# *** Always uncomment this; X11 libraries to link with:
-# -lX11
-
-# Lance Ellinghaus's modules:
-
-rotor rotormodule.c # enigma-inspired encryption
-#syslog syslogmodule.c # syslog daemon interface
-
-
-# Curses support, requring the System V version of curses, often
-# provided by the ncurses library. e.g. on Linux, link with -lncurses
-# instead of -lcurses; on SunOS 4.1.3, insert -I/usr/5include
-# -L/usr/5lib before -lcurses).
-#
-# First, look at Setup.config; configure may have set this for you.
-
-#_curses _cursesmodule.c -lcurses -ltermcap
-# Wrapper for the panel library that's part of ncurses and SYSV curses.
-#_curses_panel _curses_panel.c -lpanel -lncurses
-
-
-# Tommy Burnette's 'new' module (creates new empty objects of certain kinds):
-
-new newmodule.c
-
-
-# Generic (SunOS / SVR4) dynamic loading module.
-# This is not needed for dynamic loading of Python modules --
-# it is a highly experimental and dangerous device for calling
-# *arbitrary* C functions in *arbitrary* shared libraries:
-
-#dl dlmodule.c
-
-
-# Modules that provide persistent dictionary-like semantics. You will
-# probably want to arrange for at least one of them to be available on
-# your machine, though none are defined by default because of library
-# dependencies. The Python module anydbm.py provides an
-# implementation independent wrapper for these; dumbdbm.py provides
-# similar functionality (but slower of course) implemented in Python.
-
-# The standard Unix dbm module has been moved to Setup.config so that
-# it will be compiled as a shared library by default. Compiling it as
-# a built-in module causes conflicts with the pybsddb3 module since it
-# creates a static dependency on an out-of-date version of db.so.
-#
-# First, look at Setup.config; configure may have set this for you.
-
-#dbm dbmmodule.c # dbm(3) may require -lndbm or similar
-
-# Anthony Baxter's gdbm module. GNU dbm(3) will require -lgdbm:
-#
-# First, look at Setup.config; configure may have set this for you.
-
-#gdbm gdbmmodule.c -I/usr/local/include -L/usr/local/lib -lgdbm
-
-
-# Berkeley DB interface.
-#
-# This requires the Berkeley DB code, see
-# ftp://ftp.cs.berkeley.edu/pub/4bsd/db.1.85.tar.gz
-#
-# Edit the variables DB and DBPORT to point to the db top directory
-# and the subdirectory of PORT where you built it.
-#
-# (See http://electricrain.com/greg/python/bsddb3/ for an interface to
-# BSD DB 3.x.)
-
-# Note: If a db.h file is found by configure, bsddb will be enabled
-# automatically via Setup.config.in. It only needs to be enabled here
-# if it is not automatically enabled there; check the generated
-# Setup.config before enabling it here.
-
-#DB=/depot/sundry/src/berkeley-db/db.1.85
-#DBPORT=$(DB)/PORT/irix.5.3
-#bsddb bsddbmodule.c -I$(DBPORT)/include -I$(DBPORT) $(DBPORT)/libdb.a
-
-
-
-# David Wayne Williams' soundex module (obsolete -- this will disappear!)
-#soundex soundex.c
-
-# Helper module for various ascii-encoders
-binascii binascii.c
-
-# Fred Drake's interface to the Python parser
-parser parsermodule.c
-
-# Digital Creations' cStringIO and cPickle
-cStringIO cStringIO.c
-cPickle cPickle.c
-
-
-# Lee Busby's SIGFPE modules.
-# The library to link fpectl with is platform specific.
-# Choose *one* of the options below for fpectl:
-
-# For SGI IRIX (tested on 5.3):
-#fpectl fpectlmodule.c -lfpe
-
-# For Solaris with SunPro compiler (tested on Solaris 2.5 with SunPro C 4.2):
-# (Without the compiler you don't have -lsunmath.)
-#fpectl fpectlmodule.c -R/opt/SUNWspro/lib -lsunmath -lm
-
-# For other systems: see instructions in fpectlmodule.c.
-#fpectl fpectlmodule.c ...
-
-# Test module for fpectl. No extra libraries needed.
-#fpetest fpetestmodule.c
-
-# Andrew Kuchling's zlib module.
-# This require zlib 1.1.3 (or later).
-# See http://www.cdrom.com/pub/infozip/zlib/
-#zlib zlibmodule.c -I$(prefix)/include -L$(exec_prefix)/lib -lz
-
-# Interface to the Expat XML parser
-#
-# Expat is written by James Clark and must be downloaded separately
-# (see below). The pyexpat module was written by Paul Prescod after a
-# prototype by Jack Jansen.
-#
-# The Expat dist includes Windows .lib and .dll files. Home page is at
-# http://www.jclark.com/xml/expat.html, the current production release is
-# always ftp://ftp.jclark.com/pub/xml/expat.zip.
-#
-# EXPAT_DIR, below, should point to the expat/ directory created by
-# unpacking the Expat source distribution.
-#
-# Note: the expat build process doesn't yet build a libexpat.a; you can
-# do this manually while we try convince the author to add it. To do so,
-# cd to EXPAT_DIR, run "make" if you have not done so, then run:
-#
-# ar cr libexpat.a xmltok/*.o xmlparse/*.o
-#
-#EXPAT_DIR=/usr/local/src/expat
-#pyexpat pyexpat.c -I$(EXPAT_DIR)/xmlparse -L$(EXPAT_DIR) -lexpat
-
-
-# Example -- included for reference only:
-# xx xxmodule.c
+# The rest of the modules previously listed in this file are built
+# by the setup.py script in Python 2.1.