The usual

15 files changed, 793 insertions, 135 deletions

diff --git a/Lib/dos-8x3/fileinpu.py b/Lib/dos-8x3/fileinpu.py
new file mode 100644
index 0000000..b332202
--- /dev/null
+++ b/Lib/dos-8x3/fileinpu.py
@@ -0,0 +1,254 @@
+"""Helper class to quickly write a loop over all standard input files.
+
+Typical use is:
+
+    import fileinput
+    for line in fileinput.input():
+        process(line)
+
+This iterates over the lines of all files listed in sys.argv[1:],
+defaulting to sys.stdin if the list is empty.  If a filename is '-' it
+is also replaced by sys.stdin.  To specify an alternative list of
+filenames, pass it as the argument to input().  A single file name is
+also allowed.
+
+Functions filename(), lineno() return the filename and cumulative line
+number of the line that has just been read; filelineno() returns its
+line number in the current file; isfirstline() returns true iff the
+line just read is the first line of its file; isstdin() returns true
+iff the line was read from sys.stdin.  Function nextfile() closes the
+current file so that the next iteration will read the first line from
+the next file (if any); lines not read from the file will not count
+towards the cumulative line count; the filename is not changed until
+after the first line of the next file has been read.  Function close()
+closes the sequence.
+
+Before any lines have been read, filename() returns None and both line
+numbers are zero; nextfile() has no effect.  After all lines have been
+read, filename() and the line number functions return the values
+pertaining to the last line read; nextfile() has no effect.
+
+All files are opened in text mode.  If an I/O error occurs during
+opening or reading a file, the IOError exception is raised.
+
+If sys.stdin is used more than once, the second and further use will
+return no lines, except perhaps for interactive use, or if it has been
+explicitly reset (e.g. using sys.stdin.seek(0)).
+
+Empty files are opened and immediately closed; the only time their
+presence in the list of filenames is noticeable at all is when the
+last file opened is empty.
+
+It is possible that the last line of a file doesn't end in a newline
+character; otherwise lines are returned including the trailing
+newline.
+
+Class FileInput is the implementation; its methods filename(),
+lineno(), fileline(), isfirstline(), isstdin(), nextfile() and close()
+correspond to the functions in the module.  In addition it has a
+readline() method which returns the next input line, and a
+__getitem__() method which implements the sequence behavior.  The
+sequence must be accessed in strictly sequential order; sequence
+access and readline() cannot be mixed.
+
+Optional in-place filtering: if the keyword argument inplace=1 is
+passed to input() or to the FileInput constructor, the file is moved
+to a backup file and standard output is directed to the input file.
+This makes it possible to write a filter that rewrites its input file
+in place.  If the keyword argument backup=".<some extension>" is also
+given, it specifies the extension for the backup file, and the backup
+file remains around; by default, the extension is ".bak" and it is
+deleted when the output file is closed.  In-place filtering is
+disabled when standard input is read.  XXX The current implementation
+does not work for MS-DOS 8+3 filesystems.
+
+XXX Possible additions:
+
+- optional getopt argument processing
+- specify open mode ('r' or 'rb')
+- specify buffer size
+- fileno()
+- isatty()
+- read(), read(size), even readlines()
+
+"""
+
+import sys, os
+
+_state = None
+
+def input(files=(), inplace=0, backup=""):
+    global _state
+    if _state and _state._file:
+	raise RuntimeError, "input() already active"
+    _state = FileInput(files, inplace, backup)
+    return _state
+
+def close():
+    global _state
+    state = _state
+    _state = None
+    if state:
+	state.close()
+
+def nextfile():
+    if not _state:
+	raise RuntimeError, "no active input()"
+    return _state.nextfile()
+
+def filename():
+    if not _state:
+	raise RuntimeError, "no active input()"
+    return _state.filename()
+
+def lineno():
+    if not _state:
+	raise RuntimeError, "no active input()"
+    return _state.lineno()
+
+def filelineno():
+    if not _state:
+	raise RuntimeError, "no active input()"
+    return _state.filelineno()
+
+def isfirstline():
+    if not _state:
+	raise RuntimeError, "no active input()"
+    return _state.isfirstline()
+
+def isstdin():
+    if not _state:
+	raise RuntimeError, "no active input()"
+    return _state.isstdin()
+
+class FileInput:
+
+    def __init__(self, files=(), inplace=0, backup=""):
+	if type(files) == type(''):
+	    files = (files,)
+	else:
+	    files = tuple(files)
+	    if not files:
+		files = tuple(sys.argv[1:])
+		if not files:
+		    files = ('-',)
+	self._files = files
+	self._inplace = inplace
+	self._backup = backup
+	self._savestdout = None
+	self._output = None
+	self._filename = None
+	self._lineno = 0
+	self._filelineno = 0
+	self._file = None
+	self._isstdin = 0
+
+    def __del__(self):
+	self.close()
+
+    def close(self):
+	self.nextfile()
+	self._files = ()
+
+    def __getitem__(self, i):
+	if i != self._lineno:
+	    raise RuntimeError, "accessing lines out of order"
+	line = self.readline()
+	if not line:
+	    raise IndexError, "end of input reached"
+	return line
+
+    def nextfile(self):
+	savestdout = self._savestdout
+	self._savestdout = 0
+	if savestdout:
+	    sys.stdout = savestdout
+
+	output = self._output
+	self._output = 0
+	if output:
+	    output.close()
+
+	file = self._file
+	self._file = 0
+	if file and not self._isstdin:
+	    file.close()
+
+	backupfilename = self._backupfilename
+	self._backupfilename = 0
+	if backupfilename and not self._backup:
+	    try: os.unlink(backupfilename)
+	    except: pass
+
+	self._isstdin = 0
+
+    def readline(self):
+	if not self._file:
+	    if not self._files:
+		return ""
+	    self._filename = self._files[0]
+	    self._files = self._files[1:]
+	    self._filelineno = 0
+	    self._file = None
+	    self._isstdin = 0
+	    self._backupfilename = 0
+	    if self._filename == '-':
+		self._filename = '<stdin>'
+		self._file = sys.stdin
+		self._isstdin = 1
+	    else:
+		if self._inplace:
+		    self._backupfilename = (
+			self._filename + (self._backup or ".bak"))
+		    try: os.unlink(self._backupfilename)
+		    except os.error: pass
+		    # The next three lines may raise IOError
+		    os.rename(self._filename, self._backupfilename)
+		    self._file = open(self._backupfilename, "r")
+		    self._output = open(self._filename, "w")
+		    self._savestdout = sys.stdout
+		    sys.stdout = self._output
+		else:
+		    # This may raise IOError
+		    self._file = open(self._filename, "r")
+	line = self._file.readline()
+	if line:
+	    self._lineno = self._lineno + 1
+	    self._filelineno = self._filelineno + 1
+	    return line
+	self.nextfile()
+	# Recursive call
+	return self.readline()
+
+    def filename(self):
+	return self._filename
+
+    def lineno(self):
+	return self._lineno
+
+    def filelineno(self):
+	return self._filelineno
+
+    def isfirstline(self):
+	return self._filelineno == 1
+
+    def isstdin(self):
+	return self._isstdin
+
+def _test():
+    import getopt
+    inplace = 0
+    backup = 0
+    opts, args = getopt.getopt(sys.argv[1:], "ib:")
+    for o, a in opts:
+	if o == '-i': inplace = 1
+	if o == '-b': backup = a
+    for line in input(args, inplace=inplace, backup=backup):
+	if line[-1:] == '\n': line = line[:-1]
+	if line[-1:] == '\r': line = line[:-1]
+	print "%d: %s[%d]%s %s" % (lineno(), filename(), filelineno(),
+				   isfirstline() and "*" or "", line)
+    print "%d: %s[%d]" % (lineno(), filename(), filelineno())
+
+if __name__ == '__main__':
+    _test()
diff --git a/Lib/dos-8x3/formatte.py b/Lib/dos-8x3/formatte.py
index 25dbe73..504807d 100755
--- a/Lib/dos-8x3/formatte.py
+++ b/Lib/dos-8x3/formatte.py
@@ -1,5 +1,3 @@
-import regex
-import regsub
 import string
 import sys
 from types import StringType
diff --git a/Lib/dos-8x3/posixpat.py b/Lib/dos-8x3/posixpat.py
index 965184b..9960801 100755
--- a/Lib/dos-8x3/posixpat.py
+++ b/Lib/dos-8x3/posixpat.py
@@ -266,15 +266,15 @@ def expandvars(path):
 	if '$' not in path:
 		return path
 	if not _varprog:
-		import regex
-		_varprog = regex.compile('$\([a-zA-Z0-9_]+\|{[^}]*}\)')
+		import re
+		_varprog = re.compile(r'\$(\w+|\{[^}]*\})')
 	i = 0
 	while 1:
-		i = _varprog.search(path, i)
-		if i < 0:
+		m = _varprog.search(path, i)
+		if not m:
 			break
-		name = _varprog.group(1)
-		j = i + len(_varprog.group(0))
+		i, j = m.span(0)
+		name = m.group(1)
 		if name[:1] == '{' and name[-1:] == '}':
 			name = name[1:-1]
 		if os.environ.has_key(name):
diff --git a/Lib/dos-8x3/py_compi.py b/Lib/dos-8x3/py_compi.py
index e9e90ff..1adc3a2 100755
--- a/Lib/dos-8x3/py_compi.py
+++ b/Lib/dos-8x3/py_compi.py
@@ -14,16 +14,22 @@ def wr_long(f, x):
 def compile(file, cfile = None):
 	import os, marshal, __builtin__
 	f = open(file)
+	try:
+	    timestamp = os.fstat(file.fileno())
+	except AttributeError:
+	    timestamp = long(os.stat(file)[8])
 	codestring = f.read()
 	f.close()
-	timestamp = long(os.stat(file)[8])
 	codeobject = __builtin__.compile(codestring, file, 'exec')
 	if not cfile:
 		cfile = file + (__debug__ and 'c' or 'o')
 	fc = open(cfile, 'wb')
-	fc.write(MAGIC)
+	fc.write('\0\0\0\0')
 	wr_long(fc, timestamp)
 	marshal.dump(codeobject, fc)
+	fc.flush()
+	fc.seek(0, 0)
+	fc.write(MAGIC)
 	fc.close()
 	if os.name == 'mac':
 		import macfs
diff --git a/Lib/dos-8x3/queue.py b/Lib/dos-8x3/queue.py
index 5125fd5..1cec4e3 100755
--- a/Lib/dos-8x3/queue.py
+++ b/Lib/dos-8x3/queue.py
@@ -1,121 +1,135 @@
 # A multi-producer, multi-consumer queue.
 
-Empty = 'Queue.Empty' # Exception raised by get_nowait()
+# define this exception to be compatible with Python 1.5's class
+# exceptions, but also when -X option is used.
+try:
+    class Empty(Exception):
+	pass
+except TypeError:
+    # string based exceptions
+    Empty = 'Queue.Empty'		# Exception raised by get_nowait()
 
 class Queue:
-
-	# Initialize a queue object with a given maximum size
-	# (If maxsize is <= 0, the maximum size is infinite)
-	def __init__(self, maxsize):
-		import thread
-		self._init(maxsize)
-		self.mutex = thread.allocate_lock()
-		self.esema = thread.allocate_lock()
-		self.esema.acquire_lock()
-		self.fsema = thread.allocate_lock()
-
-	# Get an approximation of the queue size (not reliable!)
-	def qsize(self):
-		self.mutex.acquire_lock()
-		n = self._qsize()
-		self.mutex.release_lock()
-		return n
-
-	# Check if the queue is empty (not reliable!)
-	def empty(self):
-		self.mutex.acquire_lock()
-		n = self._empty()
-		self.mutex.release_lock()
-		return n
-
-	# Check if the queue is full (not reliable!)
-	def full(self):
-		self.mutex.acquire_lock()
-		n = self._full()
-		self.mutex.release_lock()
-		return n
-
-	# Put a new item into the queue
-	def put(self, item):
-		self.fsema.acquire_lock()
-		self.mutex.acquire_lock()
-		was_empty = self._empty()
-		self._put(item)
-		if was_empty:
-			self.esema.release_lock()
-		if not self._full():
-			self.fsema.release_lock()
-		self.mutex.release_lock()
-
-	# Get an item from the queue,
-	# blocking if necessary until one is available
-	def get(self):
-		self.esema.acquire_lock()
-		self.mutex.acquire_lock()
-		was_full = self._full()
-		item = self._get()
-		if was_full:
-			self.fsema.release_lock()
-		if not self._empty():
-			self.esema.release_lock()
-		self.mutex.release_lock()
-		return item
-
-	# Get an item from the queue if one is immediately available,
-	# raise Empty if the queue is empty or temporarily unavailable
-	def get_nowait(self):
-		locked = self.esema.acquire_lock(0)
-		self.mutex.acquire_lock()
-		if self._empty():
-			# The queue is empyt -- we can't have esema
-			self.mutex.release_lock()
-			raise Empty
-		if not locked:
-			locked = self.esema.acquire_lock(0)
-			if not locked:
-				# Somebody else has esema
-				# but we have mutex --
-				# go out of their way
-				self.mutex.release_lock()
-				raise Empty
-		was_full = self._full()
-		item = self._get()
-		if was_full:
-			self.fsema.release_lock()
-		if not self._empty():
-			self.esema.release_lock()
+    def __init__(self, maxsize):
+	"""Initialize a queue object with a given maximum size.
+
+	If maxsize is <= 0, the queue size is infinite.
+	"""
+	import thread
+	self._init(maxsize)
+	self.mutex = thread.allocate_lock()
+	self.esema = thread.allocate_lock()
+	self.esema.acquire_lock()
+	self.fsema = thread.allocate_lock()
+
+    def qsize(self):
+	"""Returns the approximate size of the queue (not reliable!)."""
+	self.mutex.acquire_lock()
+	n = self._qsize()
+	self.mutex.release_lock()
+	return n
+
+    def empty(self):
+	"""Returns 1 if the queue is empty, 0 otherwise (not reliable!)."""
+	self.mutex.acquire_lock()
+	n = self._empty()
+	self.mutex.release_lock()
+	return n
+
+    def full(self):
+	"""Returns 1 if the queue is full, 0 otherwise (not reliable!)."""
+	self.mutex.acquire_lock()
+	n = self._full()
+	self.mutex.release_lock()
+	return n
+
+    def put(self, item):
+	"""Put an item into the queue."""
+	self.fsema.acquire_lock()
+	self.mutex.acquire_lock()
+	was_empty = self._empty()
+	self._put(item)
+	if was_empty:
+	    self.esema.release_lock()
+	if not self._full():
+	    self.fsema.release_lock()
+	self.mutex.release_lock()
+
+    def get(self):
+	"""Gets and returns an item from the queue.
+	This method blocks if necessary until an item is available.
+	"""
+	self.esema.acquire_lock()
+	self.mutex.acquire_lock()
+	was_full = self._full()
+	item = self._get()
+	if was_full:
+	    self.fsema.release_lock()
+	if not self._empty():
+	    self.esema.release_lock()
+	self.mutex.release_lock()
+	return item
+
+    # Get an item from the queue if one is immediately available,
+    # raise Empty if the queue is empty or temporarily unavailable
+    def get_nowait(self):
+	"""Gets and returns an item from the queue.
+	Only gets an item if one is immediately available, Otherwise
+	this raises the Empty exception if the queue is empty or
+	temporarily unavailable.
+	"""
+	locked = self.esema.acquire_lock(0)
+	self.mutex.acquire_lock()
+	if self._empty():
+	    # The queue is empty -- we can't have esema
+	    self.mutex.release_lock()
+	    raise Empty
+	if not locked:
+	    locked = self.esema.acquire_lock(0)
+	    if not locked:
+		# Somebody else has esema
+		# but we have mutex --
+		# go out of their way
 		self.mutex.release_lock()
-		return item
-
-	# XXX Need to define put_nowait() as well.
-		
-
-	# Override these methods to implement other queue organizations
-	# (e.g. stack or priority queue).
-	# These will only be called with appropriate locks held
-
-	# Initialize the queue representation
-	def _init(self, maxsize):
-		self.maxsize = maxsize
-		self.queue = []
-
-	def _qsize(self):
-		return len(self.queue)
-
-	# Check wheter the queue is empty
-	def _empty(self):
-		return not self.queue
-
-	# Check whether the queue is full
-	def _full(self):
-		return self.maxsize > 0 and len(self.queue) == self.maxsize
-
-	# Put a new item in the queue
-	def _put(self, item):
-		self.queue.append(item)
-
-	# Get an item from the queue
-	def _get(self):
-		item = self.queue[0]
-		del self.queue[0]
-		return item
+		raise Empty
+	was_full = self._full()
+	item = self._get()
+	if was_full:
+	    self.fsema.release_lock()
+	if not self._empty():
+	    self.esema.release_lock()
+	self.mutex.release_lock()
+	return item
+
+    # XXX Need to define put_nowait() as well.
+
+
+    # Override these methods to implement other queue organizations
+    # (e.g. stack or priority queue).
+    # These will only be called with appropriate locks held
+
+    # Initialize the queue representation
+    def _init(self, maxsize):
+	self.maxsize = maxsize
+	self.queue = []
+
+    def _qsize(self):
+	return len(self.queue)
+
+    # Check wheter the queue is empty
+    def _empty(self):
+	return not self.queue
+
+    # Check whether the queue is full
+    def _full(self):
+	return self.maxsize > 0 and len(self.queue) == self.maxsize
+
+    # Put a new item in the queue
+    def _put(self, item):
+	self.queue.append(item)
+
+    # Get an item from the queue
+    def _get(self):
+	item = self.queue[0]
+	del self.queue[0]
+	return item
diff --git a/Lib/dos-8x3/reconver.py b/Lib/dos-8x3/reconver.py
new file mode 100644
index 0000000..f0b61fc
--- /dev/null
+++ b/Lib/dos-8x3/reconver.py
@@ -0,0 +1,186 @@
+#! /usr/bin/env python1.5
+
+"""Convert old ("regex") regular expressions to new syntax ("re").
+
+When imported as a module, there are two functions, with their own
+strings:
+
+  convert(s, syntax=None) -- convert a regex regular expression to re syntax
+
+  quote(s) -- return a quoted string literal
+
+When used as a script, read a Python string literal (or any other
+expression evaluating to a string) from stdin, and write the
+translated expression to stdout as a string literal.  Unless stdout is
+a tty, no trailing \n is written to stdout.  This is done so that it
+can be used with Emacs C-U M-| (shell-command-on-region with argument
+which filters the region through the shell command).
+
+No attempt has been made at coding for performance.
+
+Translation table...
+
+    \(    (     (unless RE_NO_BK_PARENS set)
+    \)    )     (unless RE_NO_BK_PARENS set)
+    \|    |     (unless RE_NO_BK_VBAR set)
+    \<    \b    (not quite the same, but alla...)
+    \>    \b    (not quite the same, but alla...)
+    \`    \A
+    \'    \Z
+
+Not translated...
+
+    .
+    ^
+    $
+    *
+    +           (unless RE_BK_PLUS_QM set, then to \+)
+    ?           (unless RE_BK_PLUS_QM set, then to \?)
+    \
+    \b
+    \B
+    \w
+    \W
+    \1 ... \9
+
+Special cases...
+
+    Non-printable characters are always replaced by their 3-digit
+    escape code (except \t, \n, \r, which use mnemonic escapes)
+
+    Newline is turned into | when RE_NEWLINE_OR is set
+
+XXX To be done...
+
+    [...]     (different treatment of backslashed items?)
+    [^...]    (different treatment of backslashed items?)
+    ^ $ * + ? (in some error contexts these are probably treated differently)
+    \vDD  \DD (in the regex docs but only works when RE_ANSI_HEX set)
+
+"""
+
+
+import regex
+from regex_syntax import * # RE_* 
+
+# Default translation table
+mastertable = {
+    r'\<': r'\b',
+    r'\>': r'\b',
+    r'\`': r'\A',
+    r'\'': r'\Z',
+    r'\(': '(',
+    r'\)': ')',
+    r'\|': '|',
+    '(': r'\(',
+    ')': r'\)',
+    '|': r'\|',
+    '\t': r'\t',
+    '\n': r'\n',
+    '\r': r'\r',
+}
+
+
+def convert(s, syntax=None):
+    """Convert a regex regular expression to re syntax.
+
+    The first argument is the regular expression, as a string object,
+    just like it would be passed to regex.compile().  (I.e., pass the
+    actual string object -- string quotes must already have been
+    removed and the standard escape processing has already been done,
+    e.g. by eval().)
+
+    The optional second argument is the regex syntax variant to be
+    used.  This is an integer mask as passed to regex.set_syntax();
+    the flag bits are defined in regex_syntax.  When not specified, or
+    when None is given, the current regex syntax mask (as retrieved by
+    regex.get_syntax()) is used -- which is 0 by default.
+
+    The return value is a regular expression, as a string object that
+    could be passed to re.compile().  (I.e., no string quotes have
+    been added -- use quote() below, or repr().)
+
+    The conversion is not always guaranteed to be correct.  More
+    syntactical analysis should be performed to detect borderline
+    cases and decide what to do with them.  For example, 'x*?' is not
+    translated correctly.
+
+    """
+    table = mastertable.copy()
+    if syntax is None:
+	syntax = regex.get_syntax()
+    if syntax & RE_NO_BK_PARENS:
+	del table[r'\('], table[r'\)']
+	del table['('], table[')']
+    if syntax & RE_NO_BK_VBAR:
+	del table[r'\|']
+	del table['|']
+    if syntax & RE_BK_PLUS_QM:
+	table['+'] = r'\+'
+	table['?'] = r'\?'
+	table[r'\+'] = '+'
+	table[r'\?'] = '?'
+    if syntax & RE_NEWLINE_OR:
+	table['\n'] = '|'
+    res = ""
+
+    i = 0
+    end = len(s)
+    while i < end:
+	c = s[i]
+	i = i+1
+	if c == '\\':
+	    c = s[i]
+	    i = i+1
+	    key = '\\' + c
+	    key = table.get(key, key)
+	    res = res + key
+	else:
+	    c = table.get(c, c)
+	    res = res + c
+    return res
+
+
+def quote(s, quote=None):
+    """Convert a string object to a quoted string literal.
+
+    This is similar to repr() but will return a "raw" string (r'...'
+    or r"...") when the string contains backslashes, instead of
+    doubling all backslashes.  The resulting string does *not* always
+    evaluate to the same string as the original; however it will do
+    just the right thing when passed into re.compile().
+
+    The optional second argument forces the string quote; it must be
+    a single character which is a valid Python string quote.
+
+    """
+    if quote is None:
+	q = "'"
+	altq = "'"
+	if q in s and altq not in s:
+	    q = altq
+    else:
+	assert quote in ('"', "'")
+	q = quote
+    res = q
+    for c in s:
+	if c == q: c = '\\' + c
+	elif c < ' ' or c > '~': c = "\\%03o" % ord(c)
+	res = res + c
+    res = res + q
+    if '\\' in res:
+	res = 'r' + res
+    return res
+
+
+def main():
+    """Main program -- called when run as a script."""
+    import sys
+    s = eval(sys.stdin.read())
+    sys.stdout.write(quote(convert(s)))
+    if sys.stdout.isatty():
+	sys.stdout.write("\n")
+
+
+if __name__ == '__main__':
+    main()
diff --git a/Lib/dos-8x3/regex_sy.py b/Lib/dos-8x3/regex_sy.py
index bb80f4e..8631f42 100755
--- a/Lib/dos-8x3/regex_sy.py
+++ b/Lib/dos-8x3/regex_sy.py
@@ -32,6 +32,12 @@ RE_NEWLINE_OR = 16
 #	*, +, ? - only special when not after the beginning, (, or |
 RE_CONTEXT_INDEP_OPS = 32
 
+# ANSI sequences (\n etc) and \xhh
+RE_ANSI_HEX = 64
+
+# No GNU extensions
+RE_NO_GNU_EXTENSIONS = 128
+
 # Now define combinations of bits for the standard possibilities.
 RE_SYNTAX_AWK = (RE_NO_BK_PARENS | RE_NO_BK_VBAR | RE_CONTEXT_INDEP_OPS)
 RE_SYNTAX_EGREP = (RE_SYNTAX_AWK | RE_NEWLINE_OR)
diff --git a/Lib/dos-8x3/rlcomple.py b/Lib/dos-8x3/rlcomple.py
index 285faed..4deb0bc 100644
--- a/Lib/dos-8x3/rlcomple.py
+++ b/Lib/dos-8x3/rlcomple.py
@@ -41,12 +41,8 @@ used, and this module (and the readline module) are silently inactive.
 """
 
 import readline
-import keyword
 import __builtin__
 import __main__
-import string
-import re
-import traceback
 
 class Completer:
 
@@ -71,6 +67,7 @@ class Completer:
 	currently defines in __main__ that match.
 
 	"""
+	import keyword
 	matches = []
 	n = len(text)
 	for list in [keyword.kwlist,
@@ -93,6 +90,7 @@ class Completer:
 	with a __getattr__ hook is evaluated.
 
 	"""
+	import re
 	m = re.match(r"(\w+(\.\w+)*)\.(\w*)", text)
 	if not m:
 	    return
diff --git a/Lib/dos-8x3/test_arr.py b/Lib/dos-8x3/test_arr.py
index 832f192..e95fac4 100644
--- a/Lib/dos-8x3/test_arr.py
+++ b/Lib/dos-8x3/test_arr.py
@@ -52,7 +52,7 @@ def testtype(type, example):
 	    print 'array of %s converted to a list: ' % a.typecode, a.tolist()
 	if verbose:
 	    print 'array of %s converted to a string: ' \
-	           % a.typecode, a.tostring()
+	           % a.typecode, `a.tostring()`
 
 
 main()
diff --git a/Lib/dos-8x3/test_sel.py b/Lib/dos-8x3/test_sel.py
index 85bfa41..53185b1 100755
--- a/Lib/dos-8x3/test_sel.py
+++ b/Lib/dos-8x3/test_sel.py
@@ -35,7 +35,7 @@ else:
 
 def test():
 	import sys
-	if sys.platform[:3] in ('win', 'mac'):
+	if sys.platform[:3] in ('win', 'mac', 'os2'):
 		if verbose:
 			print "Can't test select easily on", sys.platform
 		return
diff --git a/Lib/dos-8x3/test_sig.py b/Lib/dos-8x3/test_sig.py
index 51b120b..2d33635 100755
--- a/Lib/dos-8x3/test_sig.py
+++ b/Lib/dos-8x3/test_sig.py
@@ -4,9 +4,8 @@ import signal
 import os
 import sys
 
-if sys.platform[:3] == 'win':
-    raise ImportError, "Can't test signal on Windows"
-
+if sys.platform[:3] in ('win', 'os2'):
+    raise ImportError, "Can't test signal on %s" % sys.platform[:3]
 
 if verbose:
 	x = '-x'
diff --git a/Lib/dos-8x3/test_tok.py b/Lib/dos-8x3/test_tok.py
new file mode 100644
index 0000000..34a7bfb
--- /dev/null
+++ b/Lib/dos-8x3/test_tok.py
@@ -0,0 +1,22 @@
+from test_support import verbose
+import tokenize, os, sys
+
+def findfile(file):
+	if os.path.isabs(file): return file
+	path = sys.path
+	try:
+	    path = [os.path.dirname(__file__)] + path
+	except NameError:
+	    pass
+	for dn in path:
+		fn = os.path.join(dn, file)
+		if os.path.exists(fn): return fn
+	return file
+
+if verbose:
+    print 'starting...'
+file = open(findfile('tokenize_tests.py'))
+tokenize.tokenize(file.readline)
+if verbose:
+    print 'finished'
+
diff --git a/Lib/dos-8x3/test_typ.py b/Lib/dos-8x3/test_typ.py
index eedf65a..7cca131 100755
--- a/Lib/dos-8x3/test_typ.py
+++ b/Lib/dos-8x3/test_typ.py
@@ -189,3 +189,12 @@ d.update({1:1, 2:2, 3:3})
 if d != {1:1, 2:2, 3:3}: raise TestFailed, 'dict update'
 if d.copy() != {1:1, 2:2, 3:3}: raise TestFailed, 'dict copy'
 if {}.copy() != {}: raise TestFailed, 'empty dict copy'
+# dict.get()
+d = {}
+if d.get('c') != None: raise TestFailed, 'missing {} get, no 2nd arg'
+if d.get('c', 3) != 3: raise TestFailed, 'missing {} get, w/ 2nd arg'
+d = {'a' : 1, 'b' : 2}
+if d.get('c') != None: raise TestFailed, 'missing dict get, no 2nd arg'
+if d.get('c', 3) != 3: raise TestFailed, 'missing dict get, w/ 2nd arg'
+if d.get('a') != 1: raise TestFailed, 'present dict get, no 2nd arg'
+if d.get('a', 3) != 1: raise TestFailed, 'present dict get, w/ 2nd arg'
diff --git a/Lib/dos-8x3/tokenize.py b/Lib/dos-8x3/tokenize.py
new file mode 100644
index 0000000..4883668
--- /dev/null
+++ b/Lib/dos-8x3/tokenize.py
@@ -0,0 +1,161 @@
+# Tests for the 'tokenize' module.
+# Large bits stolen from test_grammar.py. 
+
+# Comments
+"#"
+#'
+#"
+#\
+       #
+    # abc
+'''#
+#'''
+
+x = 1  #
+
+# Balancing continuation
+
+a = (3, 4,
+  5, 6)
+y = [3, 4,
+  5]
+z = {'a':5,
+  'b':6}
+x = (len(`y`) + 5*x - a[
+   3 ]
+   - x + len({
+   }
+    )
+  )
+
+# Backslash means line continuation:
+x = 1 \
++ 1
+
+# Backslash does not means continuation in comments :\
+x = 0
+
+# Ordinary integers
+0xff <> 255
+0377 <> 255
+2147483647   != 017777777777
+-2147483647-1 != 020000000000
+037777777777 != -1
+0xffffffff != -1
+
+# Long integers
+x = 0L
+x = 0l
+x = 0xffffffffffffffffL
+x = 0xffffffffffffffffl
+x = 077777777777777777L
+x = 077777777777777777l
+x = 123456789012345678901234567890L
+x = 123456789012345678901234567890l
+
+# Floating-point numbers
+x = 3.14
+x = 314.
+x = 0.314
+# XXX x = 000.314
+x = .314
+x = 3e14
+x = 3E14
+x = 3e-14
+x = 3e+14
+x = 3.e14
+x = .3e14
+x = 3.1e4
+
+# String literals
+x = ''; y = "";
+x = '\''; y = "'";
+x = '"'; y = "\"";
+x = "doesn't \"shrink\" does it"
+y = 'doesn\'t "shrink" does it'
+x = "does \"shrink\" doesn't it"
+y = 'does "shrink" doesn\'t it'
+x = """
+The "quick"
+brown fox
+jumps over
+the 'lazy' dog.
+"""
+y = '\nThe "quick"\nbrown fox\njumps over\nthe \'lazy\' dog.\n'
+y = '''
+The "quick"
+brown fox
+jumps over
+the 'lazy' dog.
+''';
+y = "\n\
+The \"quick\"\n\
+brown fox\n\
+jumps over\n\
+the 'lazy' dog.\n\
+";
+y = '\n\
+The \"quick\"\n\
+brown fox\n\
+jumps over\n\
+the \'lazy\' dog.\n\
+';
+x = r'\\' + R'\\'
+x = r'\'' + ''
+y = r'''
+foo bar \\
+baz''' + R'''
+foo'''
+y = r"""foo
+bar \\ baz
+""" + R'''spam
+'''
+
+# Indentation
+if 1:
+    x = 2
+if 1:
+        x = 2
+if 1:
+    while 0:
+     if 0:
+           x = 2
+     x = 2
+if 0:
+  if 2:
+   while 0:
+        if 1:
+          x = 2
+
+# Operators
+
+def d22(a, b, c=1, d=2): pass
+def d01v(a=1, *rest, **rest): pass
+
+(x, y) <> ({'a':1}, {'b':2})
+
+# comparison
+if 1 < 1 > 1 == 1 >= 1 <= 1 <> 1 != 1 in 1 not in 1 is 1 is not 1: pass
+
+# binary
+x = 1 & 1
+x = 1 ^ 1
+x = 1 | 1
+
+# shift
+x = 1 << 1 >> 1
+
+# additive
+x = 1 - 1 + 1 - 1 + 1
+
+# multiplicative
+x = 1 / 1 * 1 % 1
+
+# unary
+x = ~1 ^ 1 & 1 | 1 & 1 ^ -1
+x = -1*1/1 + 1*1 - ---1*1
+
+# selector
+import sys, time
+x = sys.modules['time'].time()
+
diff --git a/Lib/dos-8x3/userdict.py b/Lib/dos-8x3/userdict.py
index 2f4f541..3b9b157 100755
--- a/Lib/dos-8x3/userdict.py
+++ b/Lib/dos-8x3/userdict.py
@@ -26,3 +26,8 @@ class UserDict:
 	else:
 	    for k, v in other.items():
 		self.data[k] = v
+    def get(self, key, failobj=None):
+	if self.data.has_key(key):
+	    return self.data[key]
+	else:
+	    return failobj