assume egd unless OPENSSL_NO_EGD is defined—remove configure check (closes #24557)

6 files changed, 160 insertions, 135 deletions

diff --git a/Modules/_ssl.c b/Modules/_ssl.c
index 1117b55..ddf8e45 100644
--- a/Modules/_ssl.c
+++ b/Modules/_ssl.c
@@ -3938,7 +3938,7 @@ _ssl_RAND_status_impl(PyModuleDef *module)
     return PyLong_FromLong(RAND_status());
 }
 
-#ifdef HAVE_RAND_EGD
+#ifndef OPENSSL_NO_EGD
 /*[clinic input]
 _ssl.RAND_egd
     path: object(converter="PyUnicode_FSConverter")
@@ -3964,7 +3964,7 @@ _ssl_RAND_egd_impl(PyModuleDef *module, PyObject *path)
     }
     return PyLong_FromLong(bytes);
 }
-#endif /* HAVE_RAND_EGD */
+#endif /* OPENSSL_NO_EGD */
 
 
 
diff --git a/Modules/clinic/_ssl.c.h b/Modules/clinic/_ssl.c.h
index 4dbc5d0..9cbcc28 100644
--- a/Modules/clinic/_ssl.c.h
+++ b/Modules/clinic/_ssl.c.h
@@ -893,7 +893,7 @@ _ssl_RAND_status(PyModuleDef *module, PyObject *Py_UNUSED(ignored))
     return _ssl_RAND_status_impl(module);
 }
 
-#if defined(HAVE_RAND_EGD)
+#if !defined(OPENSSL_NO_EGD)
 
 PyDoc_STRVAR(_ssl_RAND_egd__doc__,
 "RAND_egd($module, path, /)\n"
@@ -924,7 +924,7 @@ exit:
     return return_value;
 }
 
-#endif /* defined(HAVE_RAND_EGD) */
+#endif /* !defined(OPENSSL_NO_EGD) */
 
 PyDoc_STRVAR(_ssl_get_default_verify_paths__doc__,
 "get_default_verify_paths($module, /)\n"
@@ -1102,4 +1102,4 @@ exit:
 #ifndef _SSL_ENUM_CRLS_METHODDEF
     #define _SSL_ENUM_CRLS_METHODDEF
 #endif /* !defined(_SSL_ENUM_CRLS_METHODDEF) */
-/*[clinic end generated code: output=a14999cb565a69a2 input=a9049054013a1b77]*/
+/*[clinic end generated code: output=abe795f14cb63b6a input=a9049054013a1b77]*/
diff --git a/aclocal.m4 b/aclocal.m4
index 1f0e6f4..2a745e5 100644
--- a/aclocal.m4
+++ b/aclocal.m4
@@ -12,32 +12,63 @@
 # PARTICULAR PURPOSE.
 
 m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
-# pkg.m4 - Macros to locate and utilise pkg-config.            -*- Autoconf -*-
-# serial 1 (pkg-config-0.24)
-# 
-# Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# PKG_PROG_PKG_CONFIG([MIN-VERSION])
-# ----------------------------------
+dnl pkg.m4 - Macros to locate and utilise pkg-config.   -*- Autoconf -*-
+dnl serial 11 (pkg-config-0.29.1)
+dnl
+dnl Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
+dnl Copyright © 2012-2015 Dan Nicholson <dbn.lists@gmail.com>
+dnl
+dnl This program is free software; you can redistribute it and/or modify
+dnl it under the terms of the GNU General Public License as published by
+dnl the Free Software Foundation; either version 2 of the License, or
+dnl (at your option) any later version.
+dnl
+dnl This program is distributed in the hope that it will be useful, but
+dnl WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+dnl General Public License for more details.
+dnl
+dnl You should have received a copy of the GNU General Public License
+dnl along with this program; if not, write to the Free Software
+dnl Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+dnl 02111-1307, USA.
+dnl
+dnl As a special exception to the GNU General Public License, if you
+dnl distribute this file as part of a program that contains a
+dnl configuration script generated by Autoconf, you may include it under
+dnl the same distribution terms that you use for the rest of that
+dnl program.
+
+dnl PKG_PREREQ(MIN-VERSION)
+dnl -----------------------
+dnl Since: 0.29
+dnl
+dnl Verify that the version of the pkg-config macros are at least
+dnl MIN-VERSION. Unlike PKG_PROG_PKG_CONFIG, which checks the user's
+dnl installed version of pkg-config, this checks the developer's version
+dnl of pkg.m4 when generating configure.
+dnl
+dnl To ensure that this macro is defined, also add:
+dnl m4_ifndef([PKG_PREREQ],
+dnl     [m4_fatal([must install pkg-config 0.29 or later before running autoconf/autogen])])
+dnl
+dnl See the "Since" comment for each macro you use to see what version
+dnl of the macros you require.
+m4_defun([PKG_PREREQ],
+[m4_define([PKG_MACROS_VERSION], [0.29.1])
+m4_if(m4_version_compare(PKG_MACROS_VERSION, [$1]), -1,
+    [m4_fatal([pkg.m4 version $1 or higher is required but ]PKG_MACROS_VERSION[ found])])
+])dnl PKG_PREREQ
+
+dnl PKG_PROG_PKG_CONFIG([MIN-VERSION])
+dnl ----------------------------------
+dnl Since: 0.16
+dnl
+dnl Search for the pkg-config tool and set the PKG_CONFIG variable to
+dnl first found in the path. Checks that the version of pkg-config found
+dnl is at least MIN-VERSION. If MIN-VERSION is not specified, 0.9.0 is
+dnl used since that's the first version where most current features of
+dnl pkg-config existed.
 AC_DEFUN([PKG_PROG_PKG_CONFIG],
 [m4_pattern_forbid([^_?PKG_[A-Z_]+$])
 m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$])
@@ -59,18 +90,19 @@ if test -n "$PKG_CONFIG"; then
 		PKG_CONFIG=""
 	fi
 fi[]dnl
-])# PKG_PROG_PKG_CONFIG
-
-# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
-#
-# Check to see whether a particular set of modules exists.  Similar
-# to PKG_CHECK_MODULES(), but does not set variables or print errors.
-#
-# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
-# only at the first occurence in configure.ac, so if the first place
-# it's called might be skipped (such as if it is within an "if", you
-# have to call PKG_CHECK_EXISTS manually
-# --------------------------------------------------------------
+])dnl PKG_PROG_PKG_CONFIG
+
+dnl PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
+dnl -------------------------------------------------------------------
+dnl Since: 0.18
+dnl
+dnl Check to see whether a particular set of modules exists. Similar to
+dnl PKG_CHECK_MODULES(), but does not set variables or print errors.
+dnl
+dnl Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
+dnl only at the first occurence in configure.ac, so if the first place
+dnl it's called might be skipped (such as if it is within an "if", you
+dnl have to call PKG_CHECK_EXISTS manually
 AC_DEFUN([PKG_CHECK_EXISTS],
 [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
 if test -n "$PKG_CONFIG" && \
@@ -80,8 +112,10 @@ m4_ifvaln([$3], [else
   $3])dnl
 fi])
 
-# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
-# ---------------------------------------------
+dnl _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
+dnl ---------------------------------------------
+dnl Internal wrapper calling pkg-config via PKG_CONFIG and setting
+dnl pkg_failed based on the result.
 m4_define([_PKG_CONFIG],
 [if test -n "$$1"; then
     pkg_cv_[]$1="$$1"
@@ -93,10 +127,11 @@ m4_define([_PKG_CONFIG],
  else
     pkg_failed=untried
 fi[]dnl
-])# _PKG_CONFIG
+])dnl _PKG_CONFIG
 
-# _PKG_SHORT_ERRORS_SUPPORTED
-# -----------------------------
+dnl _PKG_SHORT_ERRORS_SUPPORTED
+dnl ---------------------------
+dnl Internal check to see if pkg-config supports short errors.
 AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
 [AC_REQUIRE([PKG_PROG_PKG_CONFIG])
 if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
@@ -104,19 +139,17 @@ if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
 else
         _pkg_short_errors_supported=no
 fi[]dnl
-])# _PKG_SHORT_ERRORS_SUPPORTED
-
-
-# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
-# [ACTION-IF-NOT-FOUND])
-#
-#
-# Note that if there is a possibility the first call to
-# PKG_CHECK_MODULES might not happen, you should be sure to include an
-# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
-#
-#
-# --------------------------------------------------------------
+])dnl _PKG_SHORT_ERRORS_SUPPORTED
+
+
+dnl PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
+dnl   [ACTION-IF-NOT-FOUND])
+dnl --------------------------------------------------------------
+dnl Since: 0.4.0
+dnl
+dnl Note that if there is a possibility the first call to
+dnl PKG_CHECK_MODULES might not happen, you should be sure to include an
+dnl explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
 AC_DEFUN([PKG_CHECK_MODULES],
 [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
 AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
@@ -170,16 +203,40 @@ else
         AC_MSG_RESULT([yes])
 	$3
 fi[]dnl
-])# PKG_CHECK_MODULES
+])dnl PKG_CHECK_MODULES
+
+
+dnl PKG_CHECK_MODULES_STATIC(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
+dnl   [ACTION-IF-NOT-FOUND])
+dnl ---------------------------------------------------------------------
+dnl Since: 0.29
+dnl
+dnl Checks for existence of MODULES and gathers its build flags with
+dnl static libraries enabled. Sets VARIABLE-PREFIX_CFLAGS from --cflags
+dnl and VARIABLE-PREFIX_LIBS from --libs.
+dnl
+dnl Note that if there is a possibility the first call to
+dnl PKG_CHECK_MODULES_STATIC might not happen, you should be sure to
+dnl include an explicit call to PKG_PROG_PKG_CONFIG in your
+dnl configure.ac.
+AC_DEFUN([PKG_CHECK_MODULES_STATIC],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+_save_PKG_CONFIG=$PKG_CONFIG
+PKG_CONFIG="$PKG_CONFIG --static"
+PKG_CHECK_MODULES($@)
+PKG_CONFIG=$_save_PKG_CONFIG[]dnl
+])dnl PKG_CHECK_MODULES_STATIC
 
 
-# PKG_INSTALLDIR(DIRECTORY)
-# -------------------------
-# Substitutes the variable pkgconfigdir as the location where a module
-# should install pkg-config .pc files. By default the directory is
-# $libdir/pkgconfig, but the default can be changed by passing
-# DIRECTORY. The user can override through the --with-pkgconfigdir
-# parameter.
+dnl PKG_INSTALLDIR([DIRECTORY])
+dnl -------------------------
+dnl Since: 0.27
+dnl
+dnl Substitutes the variable pkgconfigdir as the location where a module
+dnl should install pkg-config .pc files. By default the directory is
+dnl $libdir/pkgconfig, but the default can be changed by passing
+dnl DIRECTORY. The user can override through the --with-pkgconfigdir
+dnl parameter.
 AC_DEFUN([PKG_INSTALLDIR],
 [m4_pushdef([pkg_default], [m4_default([$1], ['${libdir}/pkgconfig'])])
 m4_pushdef([pkg_description],
@@ -190,16 +247,18 @@ AC_ARG_WITH([pkgconfigdir],
 AC_SUBST([pkgconfigdir], [$with_pkgconfigdir])
 m4_popdef([pkg_default])
 m4_popdef([pkg_description])
-]) dnl PKG_INSTALLDIR
+])dnl PKG_INSTALLDIR
 
 
-# PKG_NOARCH_INSTALLDIR(DIRECTORY)
-# -------------------------
-# Substitutes the variable noarch_pkgconfigdir as the location where a
-# module should install arch-independent pkg-config .pc files. By
-# default the directory is $datadir/pkgconfig, but the default can be
-# changed by passing DIRECTORY. The user can override through the
-# --with-noarch-pkgconfigdir parameter.
+dnl PKG_NOARCH_INSTALLDIR([DIRECTORY])
+dnl --------------------------------
+dnl Since: 0.27
+dnl
+dnl Substitutes the variable noarch_pkgconfigdir as the location where a
+dnl module should install arch-independent pkg-config .pc files. By
+dnl default the directory is $datadir/pkgconfig, but the default can be
+dnl changed by passing DIRECTORY. The user can override through the
+dnl --with-noarch-pkgconfigdir parameter.
 AC_DEFUN([PKG_NOARCH_INSTALLDIR],
 [m4_pushdef([pkg_default], [m4_default([$1], ['${datadir}/pkgconfig'])])
 m4_pushdef([pkg_description],
@@ -210,13 +269,15 @@ AC_ARG_WITH([noarch-pkgconfigdir],
 AC_SUBST([noarch_pkgconfigdir], [$with_noarch_pkgconfigdir])
 m4_popdef([pkg_default])
 m4_popdef([pkg_description])
-]) dnl PKG_NOARCH_INSTALLDIR
+])dnl PKG_NOARCH_INSTALLDIR
 
 
-# PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE,
-# [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
-# -------------------------------------------
-# Retrieves the value of the pkg-config variable for the given module.
+dnl PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE,
+dnl [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
+dnl -------------------------------------------
+dnl Since: 0.28
+dnl
+dnl Retrieves the value of the pkg-config variable for the given module.
 AC_DEFUN([PKG_CHECK_VAR],
 [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
 AC_ARG_VAR([$1], [value of $3 for $2, overriding pkg-config])dnl
@@ -225,5 +286,5 @@ _PKG_CONFIG([$1], [variable="][$3]["], [$2])
 AS_VAR_COPY([$1], [pkg_cv_][$1])
 
 AS_VAR_IF([$1], [""], [$5], [$4])dnl
-])# PKG_CHECK_VAR
+])dnl PKG_CHECK_VAR
 
diff --git a/configure b/configure
index c892a99..10fe15d 100755
--- a/configure
+++ b/configure
@@ -776,6 +776,7 @@ infodir
 docdir
 oldincludedir
 includedir
+runstatedir
 localstatedir
 sharedstatedir
 sysconfdir
@@ -886,6 +887,7 @@ datadir='${datarootdir}'
 sysconfdir='${prefix}/etc'
 sharedstatedir='${prefix}/com'
 localstatedir='${prefix}/var'
+runstatedir='${localstatedir}/run'
 includedir='${prefix}/include'
 oldincludedir='/usr/include'
 docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
@@ -1138,6 +1140,15 @@ do
   | -silent | --silent | --silen | --sile | --sil)
     silent=yes ;;
 
+  -runstatedir | --runstatedir | --runstatedi | --runstated \
+  | --runstate | --runstat | --runsta | --runst | --runs \
+  | --run | --ru | --r)
+    ac_prev=runstatedir ;;
+  -runstatedir=* | --runstatedir=* | --runstatedi=* | --runstated=* \
+  | --runstate=* | --runstat=* | --runsta=* | --runst=* | --runs=* \
+  | --run=* | --ru=* | --r=*)
+    runstatedir=$ac_optarg ;;
+
   -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
     ac_prev=sbindir ;;
   -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
@@ -1275,7 +1286,7 @@ fi
 for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
 		datadir sysconfdir sharedstatedir localstatedir includedir \
 		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
-		libdir localedir mandir
+		libdir localedir mandir runstatedir
 do
   eval ac_val=\$$ac_var
   # Remove trailing slashes.
@@ -1428,6 +1439,7 @@ Fine tuning of the installation directories:
   --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
   --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
   --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --runstatedir=DIR       modifiable per-process data [LOCALSTATEDIR/run]
   --libdir=DIR            object code libraries [EPREFIX/lib]
   --includedir=DIR        C header files [PREFIX/include]
   --oldincludedir=DIR     C header files for non-gcc [/usr/include]
@@ -9480,48 +9492,6 @@ _ACEOF
 
 fi
 	# Dynamic linking for HP-UX
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for RAND_egd in -lcrypto" >&5
-$as_echo_n "checking for RAND_egd in -lcrypto... " >&6; }
-if ${ac_cv_lib_crypto_RAND_egd+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lcrypto  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char RAND_egd ();
-int
-main ()
-{
-return RAND_egd ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_crypto_RAND_egd=yes
-else
-  ac_cv_lib_crypto_RAND_egd=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_crypto_RAND_egd" >&5
-$as_echo "$ac_cv_lib_crypto_RAND_egd" >&6; }
-if test "x$ac_cv_lib_crypto_RAND_egd" = xyes; then :
-
-$as_echo "#define HAVE_RAND_EGD 1" >>confdefs.h
-
-fi
-
 
 # only check for sem_init if thread support is requested
 if test "$with_threads" = "yes" -o -z "$with_threads"; then
diff --git a/configure.ac b/configure.ac
index 1c07c05..0aec481 100644
--- a/configure.ac
+++ b/configure.ac
@@ -2551,9 +2551,6 @@ AC_MSG_RESULT($SHLIBS)
 AC_CHECK_LIB(sendfile, sendfile)
 AC_CHECK_LIB(dl, dlopen)	# Dynamic linking for SunOS/Solaris and SYSV
 AC_CHECK_LIB(dld, shl_load)	# Dynamic linking for HP-UX
-AC_CHECK_LIB(crypto, RAND_egd,
-             AC_DEFINE(HAVE_RAND_EGD, 1,
-             [Define if the libcrypto has RAND_egd]))
 
 # only check for sem_init if thread support is requested
 if test "$with_threads" = "yes" -o -z "$with_threads"; then
diff --git a/pyconfig.h.in b/pyconfig.h.in
index 7895535..bf4ba5b 100644
--- a/pyconfig.h.in
+++ b/pyconfig.h.in
@@ -543,12 +543,12 @@
 /* Define to 1 if you have the <linux/netlink.h> header file. */
 #undef HAVE_LINUX_NETLINK_H
 
-/* Define to 1 if you have the <linux/tipc.h> header file. */
-#undef HAVE_LINUX_TIPC_H
-
 /* Define to 1 if you have the <linux/random.h> header file. */
 #undef HAVE_LINUX_RANDOM_H
 
+/* Define to 1 if you have the <linux/tipc.h> header file. */
+#undef HAVE_LINUX_TIPC_H
+
 /* Define to 1 if you have the `lockf' function. */
 #undef HAVE_LOCKF
 
@@ -696,9 +696,6 @@
 /* Define to 1 if you have the `pwrite' function. */
 #undef HAVE_PWRITE
 
-/* Define if the libcrypto has RAND_egd */
-#undef HAVE_RAND_EGD
-
 /* Define to 1 if you have the `readlink' function. */
 #undef HAVE_READLINK