Merge doc changes from 3.2 (#8617, #10745).

In the install and library docs, I changed the text to refer to
packaging instead of distutils.  I also checked that the documented
paths correctly reflect what’s really defined in sysconfig; the main
difference with paths defined in distutils.install is that include
directories don’t end with the distribution name anymore (i.e. distutils
uses include/python3.3/spam, sysconfig include/python3.3), I have no
idea why.

7 files changed, 410 insertions, 161 deletions

diff --git a/Doc/distutils/install.rst b/Doc/distutils/install.rst
index 6f4de7a..171ef98 100644
--- a/Doc/distutils/install.rst
+++ b/Doc/distutils/install.rst
@@ -279,6 +279,14 @@ statements shown below, and get the output as shown, to find out my
    >>> sys.exec_prefix
    '/usr'
 
+A few other placeholders are used in this document: :file:`{X.Y}` stands for the
+version of Python, for example ``3.2``; :file:`{abiflags}` will be replaced by
+the value of :data:`sys.abiflags` or the empty string for platforms which don't
+define ABI flags; :file:`{distname}` will be replaced by the name of the module
+distribution being installed.  Dots and capitalization are important in the
+paths; for example, a value that uses ``python3.2`` on UNIX will typically use
+``Python32`` on Windows.
+
 If you don't want to install modules to the standard location, or if you don't
 have permission to write there, then you need to read about alternate
 installations in section :ref:`inst-alt-install`.  If you want to customize your
@@ -307,8 +315,61 @@ scheme*) under this base directory in which to install files.  The details
 differ across platforms, so read whichever of the following sections applies to
 you.
 
+Note that the various alternate installation schemes are mutually exclusive: you
+can pass ``--user``, or ``--home``, or ``--prefix`` and ``--exec-prefix``, or
+``--install-base`` and ``--install-platbase``, but you can't mix from these
+groups.
+
+
+.. _inst-alt-install-user:
+
+Alternate installation: the user scheme
+---------------------------------------
+
+This scheme is designed to be the most convenient solution for users that don't
+have write permission to the global site-packages directory or don't want to
+install into it.  It is enabled with a simple option::
+
+   python setup.py install --user
+
+Files will be installed into subdirectories of :data:`site.USER_BASE` (written
+as :file:`{userbase}` hereafter).  This scheme installs pure Python modules and
+extension modules in the same location (also known as :data:`site.USER_SITE`).
+Here are the values for UNIX, including Mac OS X:
+
+=============== ===========================================================
+Type of file    Installation directory
+=============== ===========================================================
+modules         :file:`{userbase}/lib/python{X.Y}/site-packages`
+scripts         :file:`{userbase}/bin`
+data            :file:`{userbase}`
+C headers       :file:`{userbase}/include/python{X.Y}{abiflags}/{distname}`
+=============== ===========================================================
+
+And here are the values used on Windows:
+
+=============== ===========================================================
+Type of file    Installation directory
+=============== ===========================================================
+modules         :file:`{userbase}\\Python{XY}\\site-packages`
+scripts         :file:`{userbase}\\Scripts`
+data            :file:`{userbase}`
+C headers       :file:`{userbase}\\Python{XY}\\Include\\{distname}`
+=============== ===========================================================
+
+The advantage of using this scheme compared to the other ones described below is
+that the user site-packages directory is under normal conditions always included
+in :data:`sys.path` (see :mod:`site` for more information), which means that
+there is no additional step to perform after running the :file:`setup.py` script
+to finalize the installation.
+
+The :command:`build_ext` command also has a ``--user`` option to add
+:file:`{userbase}/include` to the compiler search path for header files and
+:file:`{userbase}/lib` to the compiler search path for libraries as well as to
+the runtime search path for shared C libraries (rpath).
 
-.. _inst-alt-install-prefix:
+
+.. _inst-alt-install-home:
 
 Alternate installation: the home scheme
 ---------------------------------------
@@ -330,23 +391,27 @@ will expand this to your home directory::
 
    python setup.py install --home=~
 
+To make Python find the distributions installed with this scheme, you may have
+to :ref:`modify Python's search path <inst-search-path>` or edit
+:mod:`sitecustomize` (see :mod:`site`) to call :func:`site.addsitedir` or edit
+:data:`sys.path`.
+
 The :option:`--home` option defines the installation base directory.  Files are
 installed to the following directories under the installation base as follows:
 
-+------------------------------+---------------------------+-----------------------------+
-| Type of file                 | Installation Directory    | Override option             |
-+==============================+===========================+=============================+
-| pure module distribution     | :file:`{home}/lib/python` | :option:`--install-purelib` |
-+------------------------------+---------------------------+-----------------------------+
-| non-pure module distribution | :file:`{home}/lib/python` | :option:`--install-platlib` |
-+------------------------------+---------------------------+-----------------------------+
-| scripts                      | :file:`{home}/bin`        | :option:`--install-scripts` |
-+------------------------------+---------------------------+-----------------------------+
-| data                         | :file:`{home}/share`      | :option:`--install-data`    |
-+------------------------------+---------------------------+-----------------------------+
+=============== ===========================================================
+Type of file    Installation directory
+=============== ===========================================================
+modules         :file:`{home}/lib/python`
+scripts         :file:`{home}/bin`
+data            :file:`{home}`
+C headers       :file:`{home}/include/python/{distname}`
+=============== ===========================================================
 
+(Mentally replace slashes with backslashes if you're on Windows.)
 
-.. _inst-alt-install-home:
+
+.. _inst-alt-install-prefix-unix:
 
 Alternate installation: Unix (the prefix scheme)
 ------------------------------------------------
@@ -355,7 +420,7 @@ The "prefix scheme" is useful when you wish to use one Python installation to
 perform the build/install (i.e., to run the setup script), but install modules
 into the third-party module directory of a different Python installation (or
 something that looks like a different Python installation).  If this sounds a
-trifle unusual, it is---that's why the "home scheme" comes first.  However,
+trifle unusual, it is---that's why the user and home schemes come before.  However,
 there are at least two known cases where the prefix scheme will be useful.
 
 First, consider that many Linux distributions put Python in :file:`/usr`, rather
@@ -383,17 +448,15 @@ non-pure module distributions, but could be expanded to C libraries, binary
 executables, etc.)  If :option:`--exec-prefix` is not supplied, it defaults to
 :option:`--prefix`.  Files are installed as follows:
 
-+------------------------------+-----------------------------------------------------+-----------------------------+
-| Type of file                 | Installation Directory                              | Override option             |
-+==============================+=====================================================+=============================+
-| pure module distribution     | :file:`{prefix}/lib/python{X.Y}/site-packages`      | :option:`--install-purelib` |
-+------------------------------+-----------------------------------------------------+-----------------------------+
-| non-pure module distribution | :file:`{exec-prefix}/lib/python{X.Y}/site-packages` | :option:`--install-platlib` |
-+------------------------------+-----------------------------------------------------+-----------------------------+
-| scripts                      | :file:`{prefix}/bin`                                | :option:`--install-scripts` |
-+------------------------------+-----------------------------------------------------+-----------------------------+
-| data                         | :file:`{prefix}/share`                              | :option:`--install-data`    |
-+------------------------------+-----------------------------------------------------+-----------------------------+
+================= ==========================================================
+Type of file      Installation directory
+================= ==========================================================
+Python modules    :file:`{prefix}/lib/python{X.Y}/site-packages`
+extension modules :file:`{exec-prefix}/lib/python{X.Y}/site-packages`
+scripts           :file:`{prefix}/bin`
+data              :file:`{prefix}`
+C headers         :file:`{prefix}/include/python{X.Y}{abiflags}/{distname}`
+================= ==========================================================
 
 There is no requirement that :option:`--prefix` or :option:`--exec-prefix`
 actually point to an alternate Python installation; if the directories listed
@@ -418,7 +481,7 @@ if your :option:`--prefix` and :option:`--exec-prefix` don't even point to an
 alternate Python installation, this is immaterial.)
 
 
-.. _inst-alt-install-windows:
+.. _inst-alt-install-prefix-windows:
 
 Alternate installation: Windows (the prefix scheme)
 ---------------------------------------------------
@@ -433,20 +496,18 @@ locations on Windows. ::
 to install modules to the :file:`\\Temp\\Python` directory on the current drive.
 
 The installation base is defined by the :option:`--prefix` option; the
-:option:`--exec-prefix` option is not supported under Windows. Files are
-installed as follows:
-
-+------------------------------+---------------------------+-----------------------------+
-| Type of file                 | Installation Directory    | Override option             |
-+==============================+===========================+=============================+
-| pure module distribution     | :file:`{prefix}`          | :option:`--install-purelib` |
-+------------------------------+---------------------------+-----------------------------+
-| non-pure module distribution | :file:`{prefix}`          | :option:`--install-platlib` |
-+------------------------------+---------------------------+-----------------------------+
-| scripts                      | :file:`{prefix}\\Scripts` | :option:`--install-scripts` |
-+------------------------------+---------------------------+-----------------------------+
-| data                         | :file:`{prefix}\\Data`    | :option:`--install-data`    |
-+------------------------------+---------------------------+-----------------------------+
+:option:`--exec-prefix` option is not supported under Windows, which means that
+pure Python modules and extension modules are installed into the same location.
+Files are installed as follows:
+
+=============== ==========================================================
+Type of file    Installation directory
+=============== ==========================================================
+modules         :file:`{prefix}\\Lib\\site-packages`
+scripts         :file:`{prefix}\\Scripts`
+data            :file:`{prefix}`
+C headers       :file:`{prefix}\\Include\\{distname}`
+=============== ==========================================================
 
 
 .. _inst-custom-install:
@@ -460,13 +521,29 @@ one or two directories while keeping everything under the same base directory,
 or you might want to completely redefine the installation scheme.  In either
 case, you're creating a *custom installation scheme*.
 
-You probably noticed the column of "override options" in the tables describing
-the alternate installation schemes above.  Those options are how you define a
-custom installation scheme.  These override options can be relative, absolute,
+To create a custom installation scheme, you start with one of the alternate
+schemes and override some of the installation directories used for the various
+types of files, using these options:
+
+====================== =======================
+Type of file           Override option
+====================== =======================
+Python modules         ``--install-purelib``
+extension modules      ``--install-platlib``
+all modules            ``--install-lib``
+scripts                ``--install-scripts``
+data                   ``--install-data``
+C headers              ``--install-headers``
+====================== =======================
+
+These override options can be relative, absolute,
 or explicitly defined in terms of one of the installation base directories.
 (There are two installation base directories, and they are normally the same---
 they only differ when you use the Unix "prefix scheme" and supply different
-:option:`--prefix` and :option:`--exec-prefix` options.)
+``--prefix`` and ``--exec-prefix`` options; using ``--install-lib`` will
+override values computed or given for ``--install-purelib`` and
+``--install-platlib``, and is recommended for schemes that don't make a
+difference between Python and extension modules.)
 
 For example, say you're installing a module distribution to your home directory
 under Unix---but you want scripts to go in :file:`~/scripts` rather than
@@ -493,15 +570,16 @@ If you maintain Python on Windows, you might want third-party modules to live in
 a subdirectory of :file:`{prefix}`, rather than right in :file:`{prefix}`
 itself.  This is almost as easy as customizing the script installation directory
 ---you just have to remember that there are two types of modules to worry about,
-pure modules and non-pure modules (i.e., modules from a non-pure distribution).
-For example::
+Python and extension modules, which can conveniently be both controlled by one
+option::
 
-   python setup.py install --install-purelib=Site --install-platlib=Site
+   python setup.py install --install-lib=Site
 
-The specified installation directories are relative to :file:`{prefix}`.  Of
-course, you also have to ensure that these directories are in Python's module
-search path, such as by putting a :file:`.pth` file in :file:`{prefix}`.  See
-section :ref:`inst-search-path` to find out how to modify Python's search path.
+The specified installation directory is relative to :file:`{prefix}`.  Of
+course, you also have to ensure that this directory is in Python's module
+search path, such as by putting a :file:`.pth` file in a site directory (see
+:mod:`site`).  See section :ref:`inst-search-path` to find out how to modify
+Python's search path.
 
 If you want to define an entire installation scheme, you just have to supply all
 of the installation directory options.  The recommended way to do this is to
@@ -553,8 +631,8 @@ base directory when you run the setup script.  For example, ::
 
    python setup.py install --install-base=/tmp
 
-would install pure modules to :file:`{/tmp/python/lib}` in the first case, and
-to :file:`{/tmp/lib}` in the second case.  (For the second case, you probably
+would install pure modules to :file:`/tmp/python/lib` in the first case, and
+to :file:`/tmp/lib` in the second case.  (For the second case, you probably
 want to supply an installation base of :file:`/tmp/python`.)
 
 You probably noticed the use of ``$HOME`` and ``$PLAT`` in the sample
@@ -571,7 +649,7 @@ for details.
    needed on those platforms?
 
 
-.. XXX I'm not sure where this section should go.
+.. XXX Move this to Doc/using
 
 .. _inst-search-path:
 
diff --git a/Doc/install/install.rst b/Doc/install/install.rst
index 2f100c4..a24b764 100644
--- a/Doc/install/install.rst
+++ b/Doc/install/install.rst
@@ -293,6 +293,14 @@ and get the output as shown, to find out my :file:`{prefix}` and :file:`{exec-pr
    >>> sys.exec_prefix
    '/usr'
 
+A few other placeholders are used in this document: :file:`{X.Y}` stands for the
+version of Python, for example ``3.2``; :file:`{abiflags}` will be replaced by
+the value of :data:`sys.abiflags` or the empty string for platforms which don't
+define ABI flags; :file:`{distname}` will be replaced by the name of the module
+distribution being installed.  Dots and capitalization are important in the
+paths; for example, a value that uses ``python3.2`` on UNIX will typically use
+``Python32`` on Windows.
+
 If you don't want to install modules to the standard location, or if you don't
 have permission to write there, then you need to read about alternate
 installations in section :ref:`packaging-alt-install`. If you want to customize your
@@ -320,8 +328,72 @@ scheme*) under this base directory in which to install files. The details
 differ across platforms, so read whichever of the following sections applies to
 you.
 
+Note that the various alternate installation schemes are mutually exclusive: you
+can pass ``--user``, or ``--home``, or ``--prefix`` and ``--exec-prefix``, or
+``--install-base`` and ``--install-platbase``, but you can't mix from these
+groups.
+
 
-.. _packaging-alt-install-prefix:
+.. _packaging-alt-install-user:
+
+Alternate installation: the user scheme
+---------------------------------------
+
+This scheme is designed to be the most convenient solution for users that don't
+have write permission to the global site-packages directory or don't want to
+install into it.  It is enabled with a simple option::
+
+   pysetup run install_dist --user
+
+Files will be installed into subdirectories of :data:`site.USER_BASE` (written
+as :file:`{userbase}` hereafter).  This scheme installs pure Python modules and
+extension modules in the same location (also known as :data:`site.USER_SITE`).
+Here are the values for UNIX, including non-framework builds on Mac OS X:
+
+=============== ===========================================================
+Type of file    Installation directory
+=============== ===========================================================
+modules         :file:`{userbase}/lib/python{X.Y}/site-packages`
+scripts         :file:`{userbase}/bin`
+data            :file:`{userbase}`
+C headers       :file:`{userbase}/include/python{X.Y}`
+=============== ===========================================================
+
+Framework builds on Mac OS X use these paths:
+
+=============== ===========================================================
+Type of file    Installation directory
+=============== ===========================================================
+modules         :file:`{userbase}/lib/python/site-packages`
+scripts         :file:`{userbase}/bin`
+data            :file:`{userbase}`
+C headers       :file:`{userbase}/include/python`
+=============== ===========================================================
+
+And here are the values used on Windows:
+
+=============== ===========================================================
+Type of file    Installation directory
+=============== ===========================================================
+modules         :file:`{userbase}\\Python{XY}\\site-packages`
+scripts         :file:`{userbase}\\Scripts`
+data            :file:`{userbase}`
+C headers       :file:`{userbase}\\Python{XY}\\Include`
+=============== ===========================================================
+
+The advantage of using this scheme compared to the other ones described below is
+that the user site-packages directory is under normal conditions always included
+in :data:`sys.path` (see :mod:`site` for more information), which means that
+there is no additional step to perform after running ``pysetup`` to finalize the
+installation.
+
+The :command:`build_ext` command also has a ``--user`` option to add
+:file:`{userbase}/include` to the compiler search path for header files and
+:file:`{userbase}/lib` to the compiler search path for libraries as well as to
+the runtime search path for shared C libraries (rpath).
+
+
+.. _packaging-alt-install-home:
 
 Alternate installation: the home scheme
 ---------------------------------------
@@ -343,23 +415,27 @@ will expand this to your home directory::
 
    pysetup run install_dist --home ~
 
+To make Python find the distributions installed with this scheme, you may have
+to :ref:`modify Python's search path <inst-search-path>` or edit
+:mod:`sitecustomize` (see :mod:`site`) to call :func:`site.addsitedir` or edit
+:data:`sys.path`.
+
 The :option:`--home` option defines the base directory for the installation.
 Under it, files are installed to the following directories:
 
-+------------------------------+---------------------------+-----------------------------+
-| Type of file                 | Installation Directory    | Override option             |
-+==============================+===========================+=============================+
-| pure module distribution     | :file:`{home}/lib/python` | :option:`--install-purelib` |
-+------------------------------+---------------------------+-----------------------------+
-| non-pure module distribution | :file:`{home}/lib/python` | :option:`--install-platlib` |
-+------------------------------+---------------------------+-----------------------------+
-| scripts                      | :file:`{home}/bin`        | :option:`--install-scripts` |
-+------------------------------+---------------------------+-----------------------------+
-| data                         | :file:`{home}/share`      | :option:`--install-data`    |
-+------------------------------+---------------------------+-----------------------------+
+=============== ===========================================================
+Type of file    Installation directory
+=============== ===========================================================
+modules         :file:`{home}/lib/python`
+scripts         :file:`{home}/bin`
+data            :file:`{home}`
+C headers       :file:`{home}/include/python`
+=============== ===========================================================
 
+(Mentally replace slashes with backslashes if you're on Windows.)
 
-.. _packaging-alt-install-home:
+
+.. _packaging-alt-install-prefix-unix:
 
 Alternate installation: Unix (the prefix scheme)
 ------------------------------------------------
@@ -368,8 +444,8 @@ The "prefix scheme" is useful when you wish to use one Python installation to
 run the build command, but install modules into the third-party module directory
 of a different Python installation (or something that looks like a different
 Python installation). If this sounds a trifle unusual, it is ---that's why the
-"home scheme" comes first. However, there are at least two known cases where the
-prefix scheme will be useful.
+user and home schemes come before. However, there are at least two known cases
+where the prefix scheme will be useful.
 
 First, consider that many Linux distributions put Python in :file:`/usr`, rather
 than the more traditional :file:`/usr/local`. This is entirely appropriate,
@@ -396,17 +472,17 @@ non-pure module distributions, but could be expanded to C libraries, binary
 executables, etc.) If :option:`--exec-prefix` is not supplied, it defaults to
 :option:`--prefix`. Files are installed as follows:
 
-+------------------------------+-----------------------------------------------------+-----------------------------+
-| Type of file                 | Installation Directory                              | Override option             |
-+==============================+=====================================================+=============================+
-| pure module distribution     | :file:`{prefix}/lib/python{X.Y}/site-packages`      | :option:`--install-purelib` |
-+------------------------------+-----------------------------------------------------+-----------------------------+
-| non-pure module distribution | :file:`{exec-prefix}/lib/python{X.Y}/site-packages` | :option:`--install-platlib` |
-+------------------------------+-----------------------------------------------------+-----------------------------+
-| scripts                      | :file:`{prefix}/bin`                                | :option:`--install-scripts` |
-+------------------------------+-----------------------------------------------------+-----------------------------+
-| data                         | :file:`{prefix}/share`                              | :option:`--install-data`    |
-+------------------------------+-----------------------------------------------------+-----------------------------+
+================= ==========================================================
+Type of file      Installation directory
+================= ==========================================================
+Python modules    :file:`{prefix}/lib/python{X.Y}/site-packages`
+extension modules :file:`{exec-prefix}/lib/python{X.Y}/site-packages`
+scripts           :file:`{prefix}/bin`
+data              :file:`{prefix}`
+C headers         :file:`{prefix}/include/python{X.Y}{abiflags}`
+================= ==========================================================
+
+.. XXX misses an entry for platinclude
 
 There is no requirement that :option:`--prefix` or :option:`--exec-prefix`
 actually point to an alternate Python installation; if the directories listed
@@ -432,7 +508,7 @@ and :option:`--exec-prefix` don't even point to an alternate Python installation
 this is immaterial.)
 
 
-.. _packaging-alt-install-windows:
+.. _packaging-alt-install-prefix-windows:
 
 Alternate installation: Windows (the prefix scheme)
 ---------------------------------------------------
@@ -447,20 +523,18 @@ locations. ::
 to install modules to the :file:`\\Temp\\Python` directory on the current drive.
 
 The installation base is defined by the :option:`--prefix` option; the
-:option:`--exec-prefix` option is unsupported under Windows. Files are
-installed as follows:
-
-+------------------------------+---------------------------+-----------------------------+
-| Type of file                 | Installation Directory    | Override option             |
-+==============================+===========================+=============================+
-| pure module distribution     | :file:`{prefix}`          | :option:`--install-purelib` |
-+------------------------------+---------------------------+-----------------------------+
-| non-pure module distribution | :file:`{prefix}`          | :option:`--install-platlib` |
-+------------------------------+---------------------------+-----------------------------+
-| scripts                      | :file:`{prefix}\\Scripts` | :option:`--install-scripts` |
-+------------------------------+---------------------------+-----------------------------+
-| data                         | :file:`{prefix}\\Data`    | :option:`--install-data`    |
-+------------------------------+---------------------------+-----------------------------+
+:option:`--exec-prefix` option is not supported under Windows, which means that
+pure Python modules and extension modules are installed into the same location.
+Files are installed as follows:
+
+=============== ==========================================================
+Type of file    Installation directory
+=============== ==========================================================
+modules         :file:`{prefix}\\Lib\\site-packages`
+scripts         :file:`{prefix}\\Scripts`
+data            :file:`{prefix}`
+C headers       :file:`{prefix}\\Include`
+=============== ==========================================================
 
 
 .. _packaging-custom-install:
@@ -474,13 +548,29 @@ just one or two directories while keeping everything under the same base
 directory, or you might want to completely redefine the installation scheme.
 In either case, you're creating a *custom installation scheme*.
 
-You probably noticed the column of "override options" in the tables describing
-the alternate installation schemes above. Those options are how you define a
-custom installation scheme. These override options can be relative, absolute,
+To create a custom installation scheme, you start with one of the alternate
+schemes and override some of the installation directories used for the various
+types of files, using these options:
+
+====================== =======================
+Type of file           Override option
+====================== =======================
+Python modules         ``--install-purelib``
+extension modules      ``--install-platlib``
+all modules            ``--install-lib``
+scripts                ``--install-scripts``
+data                   ``--install-data``
+C headers              ``--install-headers``
+====================== =======================
+
+These override options can be relative, absolute,
 or explicitly defined in terms of one of the installation base directories.
 (There are two installation base directories, and they are normally the same
 ---they only differ when you use the Unix "prefix scheme" and supply different
-:option:`--prefix` and :option:`--exec-prefix` options.)
+``--prefix`` and ``--exec-prefix`` options; using ``--install-lib`` will
+override values computed or given for ``--install-purelib`` and
+``--install-platlib``, and is recommended for schemes that don't make a
+difference between Python and extension modules.)
 
 For example, say you're installing a module distribution to your home directory
 under Unix, but you want scripts to go in :file:`~/scripts` rather than
@@ -507,17 +597,18 @@ If you maintain Python on Windows, you might want third-party modules to live in
 a subdirectory of :file:`{prefix}`, rather than right in :file:`{prefix}`
 itself. This is almost as easy as customizing the script installation directory
 ---you just have to remember that there are two types of modules to worry about,
-pure modules and non-pure modules (i.e., modules from a non-pure distribution).
-For example::
+Python and extension modules, which can conveniently be both controlled by one
+option::
 
-   pysetup run install_dist --install-purelib Site --install-platlib Site
+   pysetup run install_dist --install-lib Site
 
 .. XXX Nothing is installed right under prefix in windows, is it??
 
-The specified installation directories are relative to :file:`{prefix}`. Of
-course, you also have to ensure that these directories are in Python's module
-search path, such as by putting a :file:`.pth` file in :file:`{prefix}`. See
-section :ref:`packaging-search-path` to find out how to modify Python's search path.
+The specified installation directory is relative to :file:`{prefix}`.  Of
+course, you also have to ensure that this directory is in Python's module
+search path, such as by putting a :file:`.pth` file in a site directory (see
+:mod:`site`).  See section :ref:`packaging-search-path` to find out how to modify
+Python's search path.
 
 If you want to define an entire installation scheme, you just have to supply all
 of the installation directory options. Using relative paths is recommended here.
diff --git a/Doc/library/site.rst b/Doc/library/site.rst
index 46bd5dc..b987897 100644
--- a/Doc/library/site.rst
+++ b/Doc/library/site.rst
@@ -2,22 +2,24 @@
 ================================================
 
 .. module:: site
-   :synopsis: A standard way to reference site-specific modules.
+   :synopsis: Module responsible for site-specific configuration.
 
 **Source code:** :source:`Lib/site.py`
 
 --------------
 
+.. highlightlang:: none
+
 **This module is automatically imported during initialization.** The automatic
 import can be suppressed using the interpreter's :option:`-S` option.
 
 .. index:: triple: module; search; path
 
-Importing this module will append site-specific paths to the module search
-path, unless :option:`-S` was used.  In that case, this module can be safely
-imported with no automatic modifications to the module search path.  To
-explicitly trigger the usual site-specific additions, call the
-:func:`site.main` function.
+Importing this module will append site-specific paths to the module search path
+and add a few builtins, unless :option:`-S` was used.  In that case, this module
+can be safely imported with no automatic modifications to the module search path
+or additions to the builtins.  To explicitly trigger the usual site-specific
+additions, call the :func:`site.main` function.
 
 .. versionchanged:: 3.3
    Importing the module used to trigger paths manipulation even when using
@@ -36,11 +38,11 @@ Unix and Macintosh).  For each of the distinct head-tail combinations, it sees
 if it refers to an existing directory, and if so, adds it to ``sys.path`` and
 also inspects the newly added path for configuration files.
 
-A path configuration file is a file whose name has the form :file:`package.pth`
+A path configuration file is a file whose name has the form :file:`{name}.pth`
 and exists in one of the four directories mentioned above; its contents are
 additional items (one per line) to be added to ``sys.path``.  Non-existing items
-are never added to ``sys.path``, but no check is made that the item refers to a
-directory (rather than a file).  No item is added to ``sys.path`` more than
+are never added to ``sys.path``, and no check is made that the item refers to a
+directory rather than a file.  No item is added to ``sys.path`` more than
 once.  Blank lines and lines beginning with ``#`` are skipped.  Lines starting
 with ``import`` (followed by space or tab) are executed.
 
@@ -50,8 +52,7 @@ with ``import`` (followed by space or tab) are executed.
 
 For example, suppose ``sys.prefix`` and ``sys.exec_prefix`` are set to
 :file:`/usr/local`.  The Python X.Y library is then installed in
-:file:`/usr/local/lib/python{X.Y}` (where only the first three characters of
-``sys.version`` are used to form the installation path name).  Suppose this has
+:file:`/usr/local/lib/python{X.Y}`.  Suppose this has
 a subdirectory :file:`/usr/local/lib/python{X.Y}/site-packages` with three
 subsubdirectories, :file:`foo`, :file:`bar` and :file:`spam`, and two path
 configuration files, :file:`foo.pth` and :file:`bar.pth`.  Assume
@@ -84,42 +85,59 @@ not mentioned in either path configuration file.
 
 After these path manipulations, an attempt is made to import a module named
 :mod:`sitecustomize`, which can perform arbitrary site-specific customizations.
-If this import fails with an :exc:`ImportError` exception, it is silently
-ignored.
+It is typically created by a system administrator in the site-packages
+directory.  If this import fails with an :exc:`ImportError` exception, it is
+silently ignored.
 
-.. index:: module: sitecustomize
+.. index:: module: usercustomize
+
+After this, an attempt is made to import a module named :mod:`usercustomize`,
+which can perform arbitrary user-specific customizations, if
+:data:`ENABLE_USER_SITE` is true.  This file is intended to be created in the
+user site-packages directory (see below), which is part of ``sys.path`` unless
+disabled by :option:`-s`.  An :exc:`ImportError` will be silently ignored.
 
 Note that for some non-Unix systems, ``sys.prefix`` and ``sys.exec_prefix`` are
 empty, and the path manipulations are skipped; however the import of
-:mod:`sitecustomize` is still attempted.
+:mod:`sitecustomize` and :mod:`usercustomize` is still attempted.
 
 
 .. data:: PREFIXES
 
-   A list of prefixes for site package directories
+   A list of prefixes for site-packages directories.
 
 
 .. data:: ENABLE_USER_SITE
 
-   Flag showing the status of the user site directory. True means the
-   user site directory is enabled and added to sys.path. When the flag
-   is None the user site directory is disabled for security reasons.
+   Flag showing the status of the user site-packages directory.  ``True`` means
+   that it is enabled and was added to ``sys.path``.  ``False`` means that it
+   was disabled by user request (with :option:`-s` or
+   :envvar:`PYTHONNOUSERSITE`).  ``None`` means it was disabled for security
+   reasons (mismatch between user or group id and effective id) or by an
+   administrator.
 
 
 .. data:: USER_SITE
 
-   Path to the user site directory for the current Python version or None
+   Path to the user site-packages for the running Python.  Can be ``None`` if
+   :func:`getusersitepackages` hasn't been called yet.  Default value is
+   :file:`~/.local/lib/python{X.Y}/site-packages` for UNIX and non-framework Mac
+   OS X builds, :file:`~/Library/Python/{X.Y}/lib/python/site-packages` for Mac
+   framework builds, and :file:`{%APPDATA%}\\Python\\Python{XY}\\site-packages`
+   on Windows.  This directory is a site directory, which means that
+   :file:`.pth` files in it will be processed.
 
 
 .. data:: USER_BASE
 
-   Path to the base directory for user site directories
-
-
-.. envvar:: PYTHONNOUSERSITE
-
-
-.. envvar:: PYTHONUSERBASE
+   Path to the base directory for the user site-packages.  Can be ``None`` if
+   :func:`getuserbase` hasn't been called yet.  Default value is
+   :file:`~/.local` for UNIX and Mac OS X non-framework builds,
+   :file:`~/Library/Python/{X.Y}` for Mac framework builds, and
+   :file:`{%APPDATA%}\\Python` for Windows.  This value is used by Packaging to
+   compute the installation directories for scripts, data files, Python modules,
+   etc. for the :ref:`user installation scheme <packaging-alt-install-user>`.
+   See also :envvar:`PYTHONUSERBASE`.
 
 
 .. function:: main()
@@ -135,34 +153,67 @@ empty, and the path manipulations are skipped; however the import of
 
 .. function:: addsitedir(sitedir, known_paths=None)
 
-   Adds a directory to sys.path and processes its pth files.
+   Add a directory to sys.path and process its :file:`.pth` files.  Typically
+   used in :mod:`sitecustomize` or :mod:`usercustomize` (see above).
+
 
 .. function:: getsitepackages()
 
-   Returns a list containing all global site-packages directories
-   (and possibly site-python).
+   Return a list containing all global site-packages directories (and possibly
+   site-python).
 
    .. versionadded:: 3.2
 
-.. function:: getuserbase()
 
-   Returns the "user base" directory path.
+.. function:: getuserbase()
 
-   The "user base" directory can be used to store data. If the global
-   variable ``USER_BASE`` is not initialized yet, this function will also set
-   it.
+   Return the path of the user base directory, :data:`USER_BASE`.  If it is not
+   initialized yet, this function will also set it, respecting
+   :envvar:`PYTHONUSERBASE`.
 
    .. versionadded:: 3.2
 
-.. function:: getusersitepackages()
 
-   Returns the user-specific site-packages directory path.
+.. function:: getusersitepackages()
 
-   If the global variable ``USER_SITE`` is not initialized yet, this
-   function will also set it.
+   Return the path of the user-specific site-packages directory,
+   :data:`USER_SITE`.  If it is not initialized yet, this function will also set
+   it, respecting :envvar:`PYTHONNOUSERSITE` and :data:`USER_BASE`.
 
    .. versionadded:: 3.2
 
-.. XXX Update documentation
-.. XXX document python -m site --user-base --user-site
 
+The :mod:`site` module also provides a way to get the user directories from the
+command line:
+
+.. code-block:: sh
+
+   $ python3 -m site --user-site
+   /home/user/.local/lib/python3.3/site-packages
+
+.. program:: site
+
+If it is called without arguments, it will print the contents of
+:data:`sys.path` on the standard output, followed by the value of
+:data:`USER_BASE` and whether the directory exists, then the same thing for
+:data:`USER_SITE`, and finally the value of :data:`ENABLE_USER_SITE`.
+
+.. cmdoption:: --user-base
+
+   Print the path to the user base directory.
+
+.. cmdoption:: --user-site
+
+   Print the path to the user site-packages directory.
+
+If both options are given, user base and user site will be printed (always in
+this order), separated by :data:`os.pathsep`.
+
+If any option is given, the script will exit with one of these values: ``O`` if
+the user site-packages directory is enabled, ``1`` if it was disabled by the
+user, ``2`` if it is disabled for security reasons or by an administrator, and a
+value greater than 2 if there is an error.
+
+.. seealso::
+
+   :pep:`370` -- Per user site-packages directory
diff --git a/Doc/packaging/commandref.rst b/Doc/packaging/commandref.rst
index 5fe802f..0ec7505 100644
--- a/Doc/packaging/commandref.rst
+++ b/Doc/packaging/commandref.rst
@@ -12,6 +12,12 @@ their options.
    description.  Use pysetup run <command> --help to get help about the options
    of one command.
 
+.. XXX sections from this document should be merged with other docs (e.g. check
+   and upload with uploading.rst, install_* with install/install.rst, etc.);
+   there is no value in partially duplicating information.  this file could
+   however serve as an index, i.e. just a list of all commands with links to
+   every section that describes options or usage
+
 
 Preparing distributions
 =======================
@@ -310,13 +316,8 @@ the target system.
 -----------------------
 
 Install a distribution, delegating to the other :command:`install_*` commands to
-do the work.
-
-.. program:: packaging install_dist
-
-.. cmdoption:: --user
-
-   Install in user site-packages directory (see :PEP:`370`).
+do the work.  See :ref:`packaging-how-install-works` for complete usage
+instructions.
 
 
 :command:`install_data`
diff --git a/Doc/tutorial/interactive.rst b/Doc/tutorial/interactive.rst
index 5faaf96..36acb06 100644
--- a/Doc/tutorial/interactive.rst
+++ b/Doc/tutorial/interactive.rst
@@ -156,17 +156,18 @@ symbol table.  A command to check (or even suggest) matching parentheses,
 quotes, etc., would also be useful.
 
 One alternative enhanced interactive interpreter that has been around for quite
-some time is `IPython`_, which features tab completion, object exploration and
+some time is IPython_, which features tab completion, object exploration and
 advanced history management.  It can also be thoroughly customized and embedded
 into other applications.  Another similar enhanced interactive environment is
-`bpython`_.
+bpython_.
 
 
 .. rubric:: Footnotes
 
 .. [#] Python will execute the contents of a file identified by the
    :envvar:`PYTHONSTARTUP` environment variable when you start an interactive
-   interpreter.
+   interpreter.  To customize Python even for non-interactive mode, see
+   :ref:`tut-customize`.
 
 
 .. _GNU Readline: http://tiswww.case.edu/php/chet/readline/rltop.html
diff --git a/Doc/tutorial/interpreter.rst b/Doc/tutorial/interpreter.rst
index 4b83170..4f16c87 100644
--- a/Doc/tutorial/interpreter.rst
+++ b/Doc/tutorial/interpreter.rst
@@ -236,6 +236,29 @@ in the script::
        exec(open(filename).read())
 
 
+.. _tut-customize:
+
+The Customization Modules
+-------------------------
+
+Python provides two hooks to let you customize it: :mod:`sitecustomize` and
+:mod:`usercustomize`.  To see how it works, you need first to find the location
+of your user site-packages directory.  Start Python and run this code:
+
+   >>> import site
+   >>> site.getusersitepackages()
+   '/home/user/.local/lib/python3.2/site-packages'
+
+Now you can create a file named :file:`usercustomize.py` in that directory and
+put anything you want in it.  It will affect every invocation of Python, unless
+it is started with the :option:`-s` option to disable the automatic import.
+
+:mod:`sitecustomize` works in the same way, but is typically created by an
+administrator of the computer in the global site-packages directory, and is
+imported before :mod:`usercustomize`.  See the documentation of the :mod:`site`
+module for more details.
+
+
 .. rubric:: Footnotes
 
 .. [#] On Unix, the Python 3.x interpreter is by default not installed with the
@@ -243,4 +266,3 @@ in the script::
    simultaneously installed Python 2.x executable.
 
 .. [#] A problem with the GNU Readline package may prevent this.
-
diff --git a/Doc/using/cmdline.rst b/Doc/using/cmdline.rst
index 29c5772..f7bd92b 100644
--- a/Doc/using/cmdline.rst
+++ b/Doc/using/cmdline.rst
@@ -229,7 +229,8 @@ Miscellaneous options
 
 .. cmdoption:: -s
 
-   Don't add user site directory to sys.path
+   Don't add the :data:`user site-packages directory <site.USER_SITE>` to
+   :data:`sys.path`.
 
    .. seealso::
 
@@ -470,7 +471,8 @@ These environment variables influence Python's behavior.
 
 .. envvar:: PYTHONNOUSERSITE
 
-   If this is set, Python won't add the user site directory to sys.path
+   If this is set, Python won't add the :data:`user site-packages directory
+   <site.USER_SITE>` to :data:`sys.path`.
 
    .. seealso::
 
@@ -479,7 +481,10 @@ These environment variables influence Python's behavior.
 
 .. envvar:: PYTHONUSERBASE
 
-   Sets the base directory for the user site directory
+   Defines the :data:`user base directory <site.USER_BASE>`, which is used to
+   compute the path of the :data:`user site-packages directory <site.USER_SITE>`
+   and :ref:`Packaging installation paths <packaging-alt-install-user>` for
+   ``pysetup run install_dist --user``.
 
    .. seealso::