reverted distutils doc to its 3.1 state

1 files changed, 93 insertions, 85 deletions

diff --git a/Doc/distutils/apiref.rst b/Doc/distutils/apiref.rst
index d65c59f..69ec0de 100644
--- a/Doc/distutils/apiref.rst
+++ b/Doc/distutils/apiref.rst
@@ -21,9 +21,7 @@ setup script). Indirectly provides the  :class:`distutils.dist.Distribution` and
 .. function:: setup(arguments)
 
    The basic do-everything function that does most everything you could ever ask
-   for from a Distutils method.
-
-   .. See XXXXX
+   for from a Distutils method. See XXXXX
 
    The setup function takes a large number of arguments. These are laid out in the
    following table.
@@ -149,11 +147,11 @@ setup script). Indirectly provides the  :class:`distutils.dist.Distribution` and
 In addition, the :mod:`distutils.core` module exposed a number of  classes that
 live elsewhere.
 
-* :class:`~distutils.extension.Extension` from :mod:`distutils.extension`
+* :class:`Extension` from :mod:`distutils.extension`
 
-* :class:`~distutils.cmd.Command` from :mod:`distutils.cmd`
+* :class:`Command` from :mod:`distutils.cmd`
 
-* :class:`~distutils.dist.Distribution` from :mod:`distutils.dist`
+* :class:`Distribution` from :mod:`distutils.dist`
 
 A short description of each of these follows, but see the relevant module for
 the full reference.
@@ -997,7 +995,7 @@ directories.
    errors are ignored (apart from being reported to ``sys.stdout`` if *verbose* is
    true).
 
-.. XXX Some of this could be replaced with the shutil module?
+**\*\*** Some of this could be replaced with the shutil module? **\*\***
 
 
 :mod:`distutils.file_util` --- Single file operations
@@ -1313,7 +1311,8 @@ provides the following additional features:
   the "negative alias" of :option:`--verbose`, then :option:`--quiet` on the
   command line sets *verbose* to false.
 
-.. XXX Should be replaced with :mod:`optparse`.
+**\*\*** Should be replaced with :mod:`optik` (which is also now known as
+:mod:`optparse` in Python 2.3 and later). **\*\***
 
 
 .. function:: fancy_getopt(options, negative_opt, object, args)
@@ -1681,8 +1680,8 @@ lines, and joining lines with backslashes.
 ===================================================================
 
 .. module:: distutils.cmd
-   :synopsis: This module provides the abstract base class Command. This class
-              is subclassed by the modules in the distutils.command subpackage.
+   :synopsis: This module provides the abstract base class Command. This class is subclassed
+              by the modules in the distutils.command  subpackage.
 
 
 This module supplies the abstract base class :class:`Command`.
@@ -1692,84 +1691,20 @@ This module supplies the abstract base class :class:`Command`.
 
    Abstract base class for defining command classes, the "worker bees" of the
    Distutils.  A useful analogy for command classes is to think of them as
-   subroutines with local variables called *options*.  The options are declared
-   in :meth:`initialize_options` and defined (given their final values) in
-   :meth:`finalize_options`, both of which must be defined by every command
-   class.  The distinction between the two is necessary because option values
-   might come from the outside world (command line, config file, ...), and any
-   options dependent on other options must be computed after these outside
-   influences have been processed --- hence :meth:`finalize_options`.  The body
-   of the subroutine, where it does all its work based on the values of its
-   options, is the :meth:`run` method, which must also be implemented by every
-   command class.
-
-   The class constructor takes a single argument *dist*, a :class:`Distribution`
+   subroutines with local variables called *options*.  The options are declared in
+   :meth:`initialize_options` and defined (given their final values) in
+   :meth:`finalize_options`, both of which must be defined by every command class.
+   The distinction between the two is necessary because option values might come
+   from the outside world (command line, config file, ...), and any options
+   dependent on other options must be computed after these outside influences have
+   been processed --- hence :meth:`finalize_options`.  The body of the subroutine,
+   where it does all its work based on the values of its options, is the
+   :meth:`run` method, which must also be implemented by every command class.
+
+   The class constructor takes a single argument *dist*, a  :class:`Distribution`
    instance.
 
 
-Creating a new Distutils command
-================================
-
-This section outlines the steps to create a new Distutils command.
-
-A new command lives in a module in the :mod:`distutils.command` package. There
-is a sample template in that directory called :file:`command_template`.  Copy
-this file to a new module with the same name as the new command you're
-implementing.  This module should implement a class with the same name as the
-module (and the command).  So, for instance, to create the command
-``peel_banana`` (so that users can run ``setup.py peel_banana``), you'd copy
-:file:`command_template` to :file:`distutils/command/peel_banana.py`, then edit
-it so that it's implementing the class :class:`peel_banana`, a subclass of
-:class:`distutils.cmd.Command`.
-
-Subclasses of :class:`Command` must define the following methods.
-
-.. method:: Command.initialize_options()
-
-   Set default values for all the options that this command supports.  Note that
-   these defaults may be overridden by other commands, by the setup script, by
-   config files, or by the command-line.  Thus, this is not the place to code
-   dependencies between options; generally, :meth:`initialize_options`
-   implementations are just a bunch of ``self.foo = None`` assignments.
-
-
-.. method:: Command.finalize_options()
-
-   Set final values for all the options that this command supports. This is
-   always called as late as possible, ie.  after any option assignments from the
-   command-line or from other commands have been done.  Thus, this is the place
-   to to code option dependencies: if *foo* depends on *bar*, then it is safe to
-   set *foo* from *bar* as long as *foo* still has the same value it was
-   assigned in :meth:`initialize_options`.
-
-
-.. method:: Command.run()
-
-   A command's raison d'etre: carry out the action it exists to perform,
-   controlled by the options initialized in :meth:`initialize_options`,
-   customized by other commands, the setup script, the command-line, and config
-   files, and finalized in :meth:`finalize_options`.  All terminal output and
-   filesystem interaction should be done by :meth:`run`.
-
-
-.. attribute:: Command.sub_commands
-
-   *sub_commands* formalizes the notion of a "family" of commands,
-   e.g. ``install`` as the parent with sub-commands ``install_lib``,
-   ``install_headers``, etc.  The parent of a family of commands defines
-   *sub_commands* as a class attribute; it's a list of 2-tuples ``(command_name,
-   predicate)``, with *command_name* a string and *predicate* a function, a
-   string or ``None``.  *predicate* is a method of the parent command that
-   determines whether the corresponding command is applicable in the current
-   situation.  (E.g. we ``install_headers`` is only applicable if we have any C
-   header files to install.)  If *predicate* is ``None``, that command is always
-   applicable.
-
-   *sub_commands* is usually defined at the *end* of a class, because
-   predicates can be methods of the class, so they must already have been
-   defined.  The canonical example is the :command:`install` command.
-
-
 :mod:`distutils.command` --- Individual Distutils commands
 ==========================================================
 
@@ -2008,3 +1943,76 @@ The ``register`` command registers the package with the Python Package  Index.
 This is described in more detail in :pep:`301`.
 
 .. % todo
+
+:mod:`distutils.command.check` --- Check the meta-data of a package
+===================================================================
+
+.. module:: distutils.command.check
+   :synopsis: Check the metadata of a package
+
+
+The ``check`` command performs some tests on the meta-data of a package.
+For example, it verifies that all required meta-data are provided as
+the arguments passed to the :func:`setup` function.
+
+.. % todo
+
+
+Creating a new Distutils command
+================================
+
+This section outlines the steps to create a new Distutils command.
+
+A new command lives in a module in the :mod:`distutils.command` package. There
+is a sample template in that directory called  :file:`command_template`. Copy
+this file to a new module with the same name as the new command you're
+implementing. This module should implement a class with the same name as the
+module (and the command). So, for instance, to create the command
+``peel_banana`` (so that users can run ``setup.py peel_banana``), you'd copy
+:file:`command_template`  to :file:`distutils/command/peel_banana.py`, then edit
+it so that it's implementing the class :class:`peel_banana`, a subclass of
+:class:`distutils.cmd.Command`.
+
+Subclasses of :class:`Command` must define the following methods.
+
+
+.. method:: Command.initialize_options()
+
+   Set default values for all the options that this command supports.  Note that
+   these defaults may be overridden by other commands, by the setup script, by
+   config files, or by the command-line.  Thus, this is not the place to code
+   dependencies between options; generally, :meth:`initialize_options`
+   implementations are just a bunch of ``self.foo = None`` assignments.
+
+
+.. method:: Command.finalize_options()
+
+   Set final values for all the options that this command supports. This is
+   always called as late as possible, ie.  after any option assignments from the
+   command-line or from other commands have been done.  Thus, this is the place
+   to to code option dependencies: if *foo* depends on *bar*, then it is safe to
+   set *foo* from *bar* as long as *foo* still has the same value it was
+   assigned in :meth:`initialize_options`.
+
+
+.. method:: Command.run()
+
+   A command's raison d'etre: carry out the action it exists to perform, controlled
+   by the options initialized in :meth:`initialize_options`, customized by other
+   commands, the setup script, the command-line, and config files, and finalized in
+   :meth:`finalize_options`.  All terminal output and filesystem interaction should
+   be done by :meth:`run`.
+
+*sub_commands* formalizes the notion of a "family" of commands, eg. ``install``
+as the parent with sub-commands ``install_lib``, ``install_headers``, etc.  The
+parent of a family of commands defines *sub_commands* as a class attribute; it's
+a list of 2-tuples ``(command_name, predicate)``, with *command_name* a string
+and *predicate* a function, a string or None. *predicate* is a method of
+the parent command that determines whether the corresponding command is
+applicable in the current situation.  (Eg. we ``install_headers`` is only
+applicable if we have any C header files to install.)  If *predicate* is None,
+that command is always applicable.
+
+*sub_commands* is usually defined at the \*end\* of a class, because predicates
+can be methods of the class, so they must already have been defined.  The
+canonical example is the :command:`install` command.