Delete the LaTeX doc tree.

1 files changed, 0 insertions, 181 deletions

diff --git a/Doc/lib/libuserdict.tex b/Doc/lib/libuserdict.tex
deleted file mode 100644
index 0bb57c8..0000000
--- a/Doc/lib/libuserdict.tex
+++ /dev/null
@@ -1,181 +0,0 @@
-\section{\module{UserDict} ---
-         Class wrapper for dictionary objects}
-
-\declaremodule{standard}{UserDict}
-\modulesynopsis{Class wrapper for dictionary objects.}
-
-
-The module defines a mixin,  \class{DictMixin}, defining all dictionary
-methods for classes that already have a minimum mapping interface.  This
-greatly simplifies writing classes that need to be substitutable for
-dictionaries (such as the shelve module).
-
-This also module defines a class, \class{UserDict}, that acts as a wrapper
-around dictionary objects.  The need for this class has been largely
-supplanted by the ability to subclass directly from \class{dict} (a feature
-that became available starting with Python version 2.2).  Prior to the
-introduction of \class{dict}, the \class{UserDict} class was used to
-create dictionary-like sub-classes that obtained new behaviors by overriding
-existing methods or adding new ones.
-
-The \module{UserDict} module defines the \class{UserDict} class
-and \class{DictMixin}:
-
-\begin{classdesc}{UserDict}{\optional{initialdata}} 
-Class that simulates a dictionary.  The instance's contents are kept
-in a regular dictionary, which is accessible via the \member{data}
-attribute of \class{UserDict} instances.  If \var{initialdata} is
-provided, \member{data} is initialized with its contents; note that a
-reference to \var{initialdata} will not be kept, allowing it be used
-for other purposes. \note{For backward compatibility, instances of
-\class{UserDict} are not iterable.}
-\end{classdesc}
-
-\begin{classdesc}{IterableUserDict}{\optional{initialdata}}
-Subclass of \class{UserDict} that supports direct iteration (e.g. 
-\code{for key in myDict}).
-\end{classdesc}
-
-In addition to supporting the methods and operations of mappings (see
-section \ref{typesmapping}), \class{UserDict} and
-\class{IterableUserDict} instances provide the following attribute:
-
-\begin{memberdesc}{data}
-A real dictionary used to store the contents of the \class{UserDict}
-class.
-\end{memberdesc}
-
-\begin{classdesc}{DictMixin}{}
-Mixin defining all dictionary methods for classes that already have
-a minimum dictionary interface including \method{__getitem__()},
-\method{__setitem__()}, \method{__delitem__()}, and \method{keys()}.
-
-This mixin should be used as a superclass.  Adding each of the
-above methods adds progressively more functionality.  For instance,
-defining all but \method{__delitem__} will preclude only \method{pop}
-and \method{popitem} from the full interface.
-
-In addition to the four base methods, progressively more efficiency
-comes with defining \method{__contains__()}, \method{__iter__()}, and
-\method{iteritems()}.
-
-Since the mixin has no knowledge of the subclass constructor, it
-does not define \method{__init__()} or \method{copy()}.
-\end{classdesc}
-
-
-\section{\module{UserList} ---
-         Class wrapper for list objects}
-
-\declaremodule{standard}{UserList}
-\modulesynopsis{Class wrapper for list objects.}
-
-
-\note{This module is available for backward compatibility only.  If
-you are writing code that does not need to work with versions of
-Python earlier than Python 2.2, please consider subclassing directly
-from the built-in \class{list} type.}
-
-This module defines a class that acts as a wrapper around
-list objects.  It is a useful base class for
-your own list-like classes, which can inherit from
-them and override existing methods or add new ones.  In this way one
-can add new behaviors to lists.
-
-The \module{UserList} module defines the \class{UserList} class:
-
-\begin{classdesc}{UserList}{\optional{list}}
-Class that simulates a list.  The instance's
-contents are kept in a regular list, which is accessible via the
-\member{data} attribute of \class{UserList} instances.  The instance's
-contents are initially set to a copy of \var{list}, defaulting to the
-empty list \code{[]}.  \var{list} can be either a regular Python list,
-or an instance of \class{UserList} (or a subclass).
-\end{classdesc}
-
-In addition to supporting the methods and operations of mutable
-sequences (see section \ref{typesseq}), \class{UserList} instances
-provide the following attribute:
-
-\begin{memberdesc}{data}
-A real Python list object used to store the contents of the
-\class{UserList} class.
-\end{memberdesc}
-
-\strong{Subclassing requirements:}
-Subclasses of \class{UserList} are expect to offer a constructor which
-can be called with either no arguments or one argument.  List
-operations which return a new sequence attempt to create an instance
-of the actual implementation class.  To do so, it assumes that the
-constructor can be called with a single parameter, which is a sequence
-object used as a data source.
-
-If a derived class does not wish to comply with this requirement, all
-of the special methods supported by this class will need to be
-overridden; please consult the sources for information about the
-methods which need to be provided in that case.
-
-\versionchanged[Python versions 1.5.2 and 1.6 also required that the
-                constructor be callable with no parameters, and offer
-                a mutable \member{data} attribute.  Earlier versions
-                of Python did not attempt to create instances of the
-                derived class]{2.0}
-
-
-\section{\module{UserString} ---
-         Class wrapper for string objects}
-
-\declaremodule{standard}{UserString}
-\modulesynopsis{Class wrapper for string objects.}
-\moduleauthor{Peter Funk}{pf@artcom-gmbh.de}
-\sectionauthor{Peter Funk}{pf@artcom-gmbh.de}
-
-\note{This \class{UserString} class from this module is available for
-backward compatibility only.  If you are writing code that does not
-need to work with versions of Python earlier than Python 2.2, please
-consider subclassing directly from the built-in \class{str} type
-instead of using \class{UserString} (there is no built-in equivalent
-to \class{MutableString}).}
-
-This module defines a class that acts as a wrapper around string
-objects.  It is a useful base class for your own string-like classes,
-which can inherit from them and override existing methods or add new
-ones.  In this way one can add new behaviors to strings.
-
-It should be noted that these classes are highly inefficient compared
-to real string or Unicode objects; this is especially the case for
-\class{MutableString}.
-
-The \module{UserString} module defines the following classes:
-
-\begin{classdesc}{UserString}{\optional{sequence}}
-Class that simulates a string or a Unicode string
-object.  The instance's content is kept in a regular string or Unicode
-string object, which is accessible via the \member{data} attribute of
-\class{UserString} instances.  The instance's contents are initially
-set to a copy of \var{sequence}.  \var{sequence} can be either a
-regular Python string or Unicode string, an instance of
-\class{UserString} (or a subclass) or an arbitrary sequence which can
-be converted into a string using the built-in \function{str()} function.
-\end{classdesc}
-
-\begin{classdesc}{MutableString}{\optional{sequence}}
-This class is derived from the \class{UserString} above and redefines
-strings to be \emph{mutable}.  Mutable strings can't be used as
-dictionary keys, because dictionaries require \emph{immutable} objects as
-keys.  The main intention of this class is to serve as an educational
-example for inheritance and necessity to remove (override) the
-\method{__hash__()} method in order to trap attempts to use a
-mutable object as dictionary key, which would be otherwise very
-error prone and hard to track down.
-\end{classdesc}
-
-In addition to supporting the methods and operations of string and
-Unicode objects (see section \ref{string-methods}, ``String
-Methods''), \class{UserString} instances provide the following
-attribute:
-
-\begin{memberdesc}{data}
-A real Python string or Unicode object used to store the content of the
-\class{UserString} class.
-\end{memberdesc}