Document the *new* cgi.py

1 files changed, 374 insertions, 163 deletions

diff --git a/Doc/lib/libcgi.tex b/Doc/lib/libcgi.tex
index 1262dc0..3f26398 100644
--- a/Doc/lib/libcgi.tex
+++ b/Doc/lib/libcgi.tex
@@ -8,212 +8,423 @@
 
 \renewcommand{\indexsubitem}{(in module cgi)}
 
-This module makes it easy to write Python scripts that run in a WWW
-server using the Common Gateway Interface.  It was written by Michael
-McLay and subsequently modified by Steve Majewski and Guido van
-Rossum.
-
-When a WWW server finds that a URL contains a reference to a file in a
-particular subdirectory (usually \code{/cgibin}), it runs the file as
-a subprocess.  Information about the request such as the full URL, the
-originating host etc., is passed to the subprocess in the shell
-environment; additional input from the client may be read from
-standard input.  Standard output from the subprocess is sent back
-across the network to the client as the response from the request.
-The CGI protocol describes what the environment variables passed to
-the subprocess mean and how the output should be formatted.  The
-official reference documentation for the CGI protocol can be found on
-the World-Wide Web at
-\code{<URL:http://hoohoo.ncsa.uiuc.edu/cgi/overview.html>}.  The
-\code{cgi} module was based on version 1.1 of the protocol and should
-also work with version 1.0.
-
-The \code{cgi} module defines several classes that make it easy to
-access the information passed to the subprocess from a Python script;
-in particular, it knows how to parse the input sent by an HTML
-``form'' using either a POST or a GET request (these are alternatives
-for submitting forms in the HTTP protocol).
-
-The formatting of the output is so trivial that no additional support
-is needed.  All you need to do is print a minimal set of MIME headers
-describing the output format, followed by a blank line and your actual
-output.  E.g. if you want to generate HTML, your script could start as
-follows:
+Support module for CGI (Common Gateway Interface) scripts.
+
+This module defines a number of utilities for use by CGI scripts
+written in Python.
+
+\subsection{Introduction}
+\nodename{Introduction to the CGI module}
+
+A CGI script is invoked by an HTTP server, usually to process user
+input submitted through an HTML \code{<FORM>} or \code{<ISINPUT>} element.
+
+Most often, CGI scripts live in the server's special \code{cgi-bin}
+directory.  The HTTP server places all sorts of information about the
+request (such as the client's hostname, the requested URL, the query
+string, and lots of other goodies) in the script's shell environment,
+executes the script, and sends the script's output back to the client.
+
+The script's input is connected to the client too, and sometimes the
+form data is read this way; at other times the form data is passed via
+the ``query string'' part of the URL.  This module (\code{cgi.py}) is intended
+to take care of the different cases and provide a simpler interface to
+the Python script.  It also provides a number of utilities that help
+in debugging scripts, and the latest addition is support for file
+uploads from a form (if your browser supports it -- Grail 0.3 and
+Netscape 2.0 do).
+
+The output of a CGI script should consist of two sections, separated
+by a blank line.  The first section contains a number of headers,
+telling the client what kind of data is following.  Python code to
+generate a minimal header section looks like this:
+
+\begin{verbatim}
+	print "Content-type: text/html"	# HTML is following
+	print				# blank line, end of headers
+\end{verbatim}
+
+The second section is usually HTML, which allows the client software
+to display nicely formatted text with header, in-line images, etc.
+Here's Python code that prints a simple piece of HTML:
 
 \begin{verbatim}
-# Header -- one or more lines:
-print "Content-type: text/html"
-# Blank line separating header from body:
-print
-# Body, in HTML format:
-print "<TITLE>The Amazing SPAM Homepage!</TITLE>"
-# etc...
+	print "<TITLE>CGI script output</TITLE>"
+	print "<H1>This is my first CGI script</H1>"
+	print "Hello, world!"
 \end{verbatim}
 
-The server will add some header lines of its own, but it won't touch
-the output following the header.
-
-The \code{cgi} module defines the following functions:
-
-\begin{funcdesc}{parse}{}
-Read and parse the form submitted to the script and return a
-dictionary containing the form's fields.  This should be called at
-most once per script invocation, as it may consume standard input (if
-the form was submitted through a POST request).  The keys in the
-resulting dictionary are the field names used in the submission; the
-values are {\em lists} of the field values (since field name may be
-used multiple times in a single form).  \samp{\%} escapes in the
-values are translated to their single-character equivalent using
-\code{urllib.unquote()}.  As a side effect, this function sets
-\code{environ['QUERY_STRING']} to the raw query string, if it isn't
-already set.
+(It may not be fully legal HTML according to the letter of the
+standard, but any browser will understand it.)
+
+\subsection{Using the cgi module}
+\nodename{Using the cgi module}
+
+Begin by writing \code{import cgi}.  Don't use \code{from cgi import *} -- the
+module defines all sorts of names for its own use or for backward 
+compatibility that you don't want in your namespace.
+
+It's best to use the \code{FieldStorage} class.  The other classes define in this 
+module are provided mostly for backward compatibility.  Instantiate it 
+exactly once, without arguments.  This reads the form contents from 
+standard input or the environment (depending on the value of various 
+environment variables set according to the CGI standard).  Since it may 
+consume standard input, it should be instantiated only once.
+
+The \code{FieldStorage} instance can be accessed as if it were a Python 
+dictionary.  For instance, the following code (which assumes that the 
+\code{Content-type} header and blank line have already been printed) checks that 
+the fields \code{name} and \code{addr} are both set to a non-empty string:
+
+\begin{verbatim}
+	form = cgi.FieldStorage()
+	form_ok = 0
+	if form.has_key("name") and form.has_key("addr"):
+		if form["name"].value != "" and form["addr"].value != "":
+			form_ok = 1
+	if not form_ok:
+		print "<H1>Error</H1>"
+		print "Please fill in the name and addr fields."
+		return
+	...further form processing here...
+\end{verbatim}
+
+Here the fields, accessed through \code{form[key]}, are themselves instances
+of \code{FieldStorage} (or \code{MiniFieldStorage}, depending on the form encoding).
+
+If the submitted form data contains more than one field with the same
+name, the object retrieved by \code{form[key]} is not a \code{(Mini)FieldStorage}
+instance but a list of such instances.  If you expect this possibility
+(i.e., when your HTML form comtains multiple fields with the same
+name), use the \code{type()} function to determine whether you have a single
+instance or a list of instances.  For example, here's code that
+concatenates any number of username fields, separated by commas:
+
+\begin{verbatim}
+	username = form["username"]
+	if type(username) is type([]):
+		# Multiple username fields specified
+		usernames = ""
+		for item in username:
+			if usernames:
+				# Next item -- insert comma
+				usernames = usernames + "," + item.value
+			else:
+				# First item -- don't insert comma
+				usernames = item.value
+	else:
+		# Single username field specified
+		usernames = username.value
+\end{verbatim}
+
+If a field represents an uploaded file, the value attribute reads the 
+entire file in memory as a string.  This may not be what you want.  You can 
+test for an uploaded file by testing either the filename attribute or the 
+file attribute.  You can then read the data at leasure from the file 
+attribute:
+
+\begin{verbatim}
+	fileitem = form["userfile"]
+	if fileitem.file:
+		# It's an uploaded file; count lines
+		linecount = 0
+		while 1:
+			line = fileitem.file.readline()
+			if not line: break
+			linecount = linecount + 1
+\end{verbatim}
+
+The file upload draft standard entertains the possibility of uploading
+multiple files from one field (using a recursive \code{multipart/*}
+encoding).  When this occurs, the item will be a dictionary-like
+FieldStorage item.  This can be determined by testing its type
+attribute, which should have the value \code{multipart/form-data} (or
+perhaps another string beginning with \code{multipart/}  It this case, it
+can be iterated over recursively just like the top-level form object.
+
+When a form is submitted in the ``old'' format (as the query string or as a 
+single data part of type \code{application/x-www-form-urlencoded}), the items 
+will actually be instances of the class \code{MiniFieldStorage}.  In this case,
+the list, file and filename attributes are always \code{None}.
+
+
+\subsection{Old classes}
+
+These classes, present in earlier versions of the \code{cgi} module, are still 
+supported for backward compatibility.  New applications should use the 
+
+\code{SvFormContentDict}: single value form content as dictionary; assumes each 
+field name occurs in the form only once.
+
+\code{FormContentDict}: multiple value form content as dictionary (the form
+items are lists of values).  Useful if your form contains multiple
+fields with the same name.
+
+Other classes (\code{FormContent}, \code{InterpFormContentDict}) are present for
+backwards compatibility with really old applications only.  If you still 
+use these and would be inconvenienced when they disappeared from a next 
+version of this module, drop me a note.
+
+
+\subsection{Functions}
+
+These are useful if you want more control, or if you want to employ
+some of the algorithms implemented in this module in other
+circumstances.
+
+\begin{funcdesc}{parse}{fp}: Parse a query in the environment or from a file (default \code{sys.stdin}).
 \end{funcdesc}
 
-\begin{funcdesc}{print_environ_usage}{}
-Print a piece of HTML listing the environment variables that may be
-set by the CGI protocol.
-This is mainly useful when learning about writing CGI scripts.
+\begin{funcdesc}{parse_qs}{qs}: parse a query string given as a string argument (data of type 
+\code{application/x-www-form-urlencoded}).
 \end{funcdesc}
 
-\begin{funcdesc}{print_environ}{}
-Print a piece of HTML text showing the entire contents of the shell
-environment.  This is mainly useful when debugging a CGI script.
+\begin{funcdesc}{parse_multipart}{fp\, pdict}: parse input of type \code{multipart/form-data} (for 
+file uploads).  Arguments are \code{fp} for the input file and 
+    \code{pdict} for the dictionary containing other parameters of \code{content-type} header
+
+    Returns a dictionary just like \code{parse_qs()}: keys are the field names, each 
+    value is a list of values for that field.  This is easy to use but not 
+    much good if you are expecting megabytes to be uploaded -- in that case, 
+    use the \code{FieldStorage} class instead which is much more flexible.  Note 
+    that \code{content-type} is the raw, unparsed contents of the \code{content-type} 
+    header.
+
+    Note that this does not parse nested multipart parts -- use \code{FieldStorage} for 
+    that.
 \end{funcdesc}
 
-\begin{funcdesc}{print_form}{form}
-Print a piece of HTML text showing the contents of the \var{form} (a
-dictionary, an instance of the \code{FormContentDict} class defined
-below, or a subclass thereof).
-This is mainly useful when debugging a CGI script.
+\begin{funcdesc}{parse_header}{string}: parse a header like \code{Content-type} into a main
+content-type and a dictionary of parameters.
 \end{funcdesc}
 
-\begin{funcdesc}{escape}{string}
-Convert special characters in \var{string} to HTML escapes.  In
-particular, ``\code{\&}'' is replaced with ``\code{\&amp;}'',
-``\code{<}'' is replaced with ``\code{\&lt;}'', and ``\code{>}'' is
-replaced with ``\code{\&gt;}''.  This is useful when printing (almost)
-arbitrary text in an HTML context.  Note that for inclusion in quoted
-tag attributes (e.g. \code{<A HREF="...">}), some additional
-characters would have to be converted --- in particular the string
-quote.  There is currently no function that does this.
+\begin{funcdesc}{test}{}: robust test CGI script, usable as main program.
+    Writes minimal HTTP headers and formats all information provided to
+    the script in HTML form.
 \end{funcdesc}
 
-The module defines the following classes.  Since the base class
-initializes itself by calling \code{parse()}, at most one instance of
-at most one of these classes should be created per script invocation:
+\begin{funcdesc}{print_environ}{}: format the shell environment in HTML.
+\end{funcdesc}
 
-\begin{funcdesc}{FormContentDict}{}
-This class behaves like a (read-only) dictionary and has the same keys
-and values as the dictionary returned by \code{parse()} (i.e. each
-field name maps to a list of values).  Additionally, it initializes
-its data member \code{query_string} to the raw query sent from the
-server.
+\begin{funcdesc}{print_form}{form}: format a form in HTML.
 \end{funcdesc}
 
-\begin{funcdesc}{SvFormContentDict}{}
-This class, derived from \code{FormContentDict}, is a little more
-user-friendly when you are expecting that each field name is only used
-once in the form.  When you access for a particular field (using
-\code{form[fieldname]}), it will return the string value of that item
-if it is unique, or raise \code{IndexError} if the field was specified
-more than once in the form.  (If the field wasn't specified at all,
-\code{KeyError} is raised.)  To access fields that are specified
-multiple times, use \code{form.getlist(fieldname)}.  The
-\code{values()} and \code{items()} methods return mixed lists ---
-containing strings for singly-defined fields, and lists of strings for
-multiply-defined fields.
+\begin{funcdesc}{print_directory}{}: format the current directory in HTML.
 \end{funcdesc}
 
-(It currently defines some more classes, but these are experimental
-and/or obsolescent, and are thus not documented --- see the source for
-more informations.)
+\begin{funcdesc}{print_environ_usage}{}: print a list of useful (used by CGI) environment variables in
+HTML.
+\end{funcdesc}
+
+\begin{funcdesc}{escape}{}: convert the characters ``\code{\&}'', ``\code{<}'' and ``\code{>}'' to HTML-safe
+sequences.  Use this if you need to display text that might contain
+such characters in HTML.  To translate URLs for inclusion in the HREF
+attribute of an \code{<A>} tag, use \code{urllib.quote()}.
+\end{funcdesc}
+
+
+\subsection{Caring about security}
 
-The module defines the following variable:
+There's one important rule: if you invoke an external program (e.g.
+via the \code{os.system()} or \code{os.popen()} functions), make very sure you don't
+pass arbitrary strings received from the client to the shell.  This is
+a well-known security hole whereby clever hackers anywhere on the web
+can exploit a gullible CGI script to invoke arbitrary shell commands.
+Even parts of the URL or field names cannot be trusted, since the
+request doesn't have to come from your form!
 
-\begin{datadesc}{environ}
-The shell environment, exactly as received from the http server.  See
-the CGI documentation for a description of the various fields.
-\end{datadesc}
+To be on the safe side, if you must pass a string gotten from a form
+to a shell command, you should make sure the string contains only
+alphanumeric characters, dashes, underscores, and periods.
 
-\subsection{Example}
-\nodename{CGI Example}
 
-This example assumes that you have a WWW server up and running,
-e.g.\ NCSA's \code{httpd}.
+\subsection{Installing your CGI script on a Unix system}
 
-Place the following file in a convenient spot in the WWW server's
-directory tree.  E.g., if you place it in the subdirectory \file{test}
-of the root directory and call it \file{test.html}, its URL will be
-\file{http://\var{yourservername}/test/test.html}.
+Read the documentation for your HTTP server and check with your local
+system administrator to find the directory where CGI scripts should be
+installed; usually this is in a directory \code{cgi-bin} in the server tree.
+
+Make sure that your script is readable and executable by ``others''; the
+Unix file mode should be 755 (use \code{chmod 755 filename}).  Make sure
+that the first line of the script contains \code{\#!} starting in column 1
+followed by the pathname of the Python interpreter, for instance:
 
 \begin{verbatim}
-<TITLE>Test Form Input</TITLE>
-<H1>Test Form Input</H1>
-<FORM METHOD="POST" ACTION="/cgi-bin/test.py">
-<INPUT NAME=Name> (Name)<br>
-<INPUT NAME=Address> (Address)<br>
-<INPUT TYPE=SUBMIT>
-</FORM>
+	#!/usr/local/bin/python
 \end{verbatim}
 
-Selecting this file's URL from a forms-capable browser such as Mosaic
-or Netscape will bring up a simple form with two text input fields and
-a ``submit'' button.
+Make sure the Python interpreter exists and is executable by ``others''.
+
+Make sure that any files your script needs to read or write are
+readable or writable, respectively, by ``others'' -- their mode should
+be 644 for readable and 666 for writable.  This is because, for
+security reasons, the HTTP server executes your script as user
+``nobody'', without any special privileges.  It can only read (write,
+execute) files that everybody can read (write, execute).  The current
+directory at execution time is also different (it is usually the
+server's cgi-bin directory) and the set of environment variables is
+also different from what you get at login.  in particular, don't count
+on the shell's search path for executables (\code{\$PATH}) or the Python
+module search path (\code{\$PYTHONPATH}) to be set to anything interesting.
+
+If you need to load modules from a directory which is not on Python's
+default module search path, you can change the path in your script,
+before importing other modules, e.g.:
+
+\begin{verbatim}
+	import sys
+	sys.path.insert(0, "/usr/home/joe/lib/python")
+	sys.path.insert(0, "/usr/local/lib/python")
+\end{verbatim}
+
+(This way, the directory inserted last will be searched first!)
+
+Instructions for non-Unix systems will vary; check your HTTP server's
+documentation (it will usually have a section on CGI scripts).
+
 
-But wait.  Before pressing ``submit'', a script that responds to the
-form must also be installed.  The test file as shown assumes that the
-script is called \file{test.py} and lives in the server's
-\code{cgi-bin} directory.  Here's the test script:
+\subsection{Testing your CGI script}
+
+Unfortunately, a CGI script will generally not run when you try it
+from the command line, and a script that works perfectly from the
+command line may fail mysteriously when run from the server.  There's
+one reason why you should still test your script from the command
+line: if it contains a syntax error, the python interpreter won't
+execute it at all, and the HTTP server will most likely send a cryptic
+error to the client.
+
+Assuming your script has no syntax errors, yet it does not work, you
+have no choice but to read the next section:
+
+
+\subsection{Debugging CGI scripts}
+
+First of all, check for trivial installation errors -- reading the
+section above on installing your CGI script carefully can save you a
+lot of time.  If you wonder whether you have understood the
+installation procedure correctly, try installing a copy of this module
+file (\code{cgi.py}) as a CGI script.  When invoked as a script, the file
+will dump its environment and the contents of the form in HTML form.
+Give it the right mode etc, and send it a request.  If it's installed
+in the standard \code{cgi-bin} directory, it should be possible to send it a
+request by entering a URL into your browser of the form:
 
 \begin{verbatim}
-#!/usr/local/bin/python
+	http://yourhostname/cgi-bin/cgi.py?name=Joe+Blow&addr=At+Home
+\end{verbatim}
 
-import cgi
+If this gives an error of type 404, the server cannot find the script
+-- perhaps you need to install it in a different directory.  If it
+gives another error (e.g.  500), there's an installation problem that
+you should fix before trying to go any further.  If you get a nicely
+formatted listing of the environment and form content (in this
+example, the fields should be listed as ``addr'' with value ``At Home''
+and ``name'' with value ``Joe Blow''), the \code{cgi.py} script has been
+installed correctly.  If you follow the same procedure for your own
+script, you should now be able to debug it.
 
-print "Content-type: text/html"
-print                                   # End of headers!
-print "<TITLE>Test Form Output</TITLE>"
-print "<H1>Test Form Output</H1>"
+The next step could be to call the \code{cgi} module's test() function from
+your script: replace its main code with the single statement
 
-form = cgi.SvFormContentDict()          # Load the form
+\begin{verbatim}
+	cgi.test()
+\end{verbatim}
+	
+This should produce the same results as those gotten from installing
+the \code{cgi.py} file itself.
+
+When an ordinary Python script raises an unhandled exception
+(e.g. because of a typo in a module name, a file that can't be opened,
+etc.), the Python interpreter prints a nice traceback and exits.
+While the Python interpreter will still do this when your CGI script
+raises an exception, most likely the traceback will end up in one of
+the HTTP server's log file, or be discarded altogether.
+
+Fortunately, once you have managed to get your script to execute
+*some* code, it is easy to catch exceptions and cause a traceback to
+be printed.  The \code{test()} function below in this module is an example.
+Here are the rules:
+
+\begin{enumerate}
+	\item Import the traceback module (before entering the
+	   try-except!)
+	
+	\item Make sure you finish printing the headers and the blank
+	   line early
+	
+	\item Assign \code{sys.stderr} to \code{sys.stdout}
+	
+	\item Wrap all remaining code in a try-except statement
+	
+	\item In the except clause, call \code{traceback.print_exc()}
+\end{enumerate}
+
+For example:
 
-name = addr = None                      # Default: no name and address
+\begin{verbatim}
+	import sys
+	import traceback
+	print "Content-type: text/html"
+	print
+	sys.stderr = sys.stdout
+	try:
+		...your code here...
+	except:
+		print "\n\n<PRE>"
+		traceback.print_exc()
+\end{verbatim}
 
-# Extract name and address from the form, if given
+Notes: The assignment to \code{sys.stderr} is needed because the traceback
+prints to \code{sys.stderr}.  The \code{print "$\backslash$n$\backslash$n<PRE>"} statement is necessary to
+disable the word wrapping in HTML.
 
-if form.has_key('Name'):
-        name = form['Name']
-if form.has_key('Address'):
-        addr = form['Address']
-        
-# Print an unnumbered list of the name and address, if present
+If you suspect that there may be a problem in importing the traceback
+module, you can use an even more robust approach (which only uses
+built-in modules):
 
-print "<UL>"
-if name is not None:
-        print "<LI>Name:", cgi.escape(name)
-if addr is not None:
-        print "<LI>Address:", cgi.escape(addr)
-print "</UL>"
+\begin{verbatim}
+	import sys
+	sys.stderr = sys.stdout
+	print "Content-type: text/plain"
+	print
+	...your code here...
 \end{verbatim}
 
-The script should be made executable (\samp{chmod +x \var{script}}).
-If the Python interpreter is not located at
-\file{/usr/local/bin/python} but somewhere else, the first line of the
-script should be modified accordingly.
+This relies on the Python interpreter to print the traceback.  The
+content type of the output is set to plain text, which disables all
+HTML processing.  If your script works, the raw HTML will be displayed
+by your client.  If it raises an exception, most likely after the
+first two lines have been printed, a traceback will be displayed.
+Because no HTML interpretation is going on, the traceback will
+readable.
 
-Now that everything is installed correctly, we can try out the form.
-Bring up the test form in your WWW browser, fill in a name and address
-in the form, and press the ``submit'' button.  The script should now
-run and its output is sent back to your browser.  This should roughly
-look as follows:
 
-\strong{Test Form Output}
+\subsection{Common problems and solutions}
 
 \begin{itemize}
-\item Name: \var{the name you entered}
-\item Address: \var{the address you entered}
+\item Most HTTP servers buffer the output from CGI scripts until the
+script is completed.  This means that it is not possible to display a
+progress report on the client's display while the script is running.
+
+\item Check the installation instructions above.
+
+\item Check the HTTP server's log files.  (\code{tail -f logfile} in a separate
+window may be useful!)
+
+\item Always check a script for syntax errors first, by doing something
+like \code{python script.py}.
+
+\item When using any of the debugging techniques, don't forget to add
+\code{import sys} to the top of the script.
+
+\item When invoking external programs, make sure they can be found.
+Usually, this means using absolute path names -- \code{\$PATH} is usually not
+set to a very useful value in a CGI script.
+
+\item When reading or writing external files, make sure they can be read
+or written by every user on the system.
+
+\item Don't try to give a CGI script a set-uid mode.  This doesn't work on
+most systems, and is a security liability as well.
 \end{itemize}
 
-If you didn't enter a name or address, the corresponding line will be
-missing (since the browser doesn't send empty form fields to the
-server).