Merged revisions 55225-55227,55229-55269 via svnmerge from

svn+ssh://pythondev@svn.python.org/python/branches/p3yk

................
  r55238 | guido.van.rossum | 2007-05-10 16:46:05 -0700 (Thu, 10 May 2007) | 9 lines

  Merged revisions 55227 via svnmerge from
  svn+ssh://pythondev@svn.python.org/python/trunk

  ........
    r55227 | guido.van.rossum | 2007-05-10 10:20:15 -0700 (Thu, 10 May 2007) | 2 lines

    Fix a bug in test_c_api() that caused a negative refcount.
  ........
................
  r55246 | neal.norwitz | 2007-05-11 00:01:52 -0700 (Fri, 11 May 2007) | 1 line

  Remove commands.getstatus() it is obsolete.
................
  r55248 | neal.norwitz | 2007-05-11 00:29:05 -0700 (Fri, 11 May 2007) | 2 lines

  Remove bsddb185 support.
................
  r55249 | neal.norwitz | 2007-05-11 00:29:50 -0700 (Fri, 11 May 2007) | 1 line

  Remove bsddb185 module too
................
  r55250 | neal.norwitz | 2007-05-11 00:32:13 -0700 (Fri, 11 May 2007) | 1 line

  bsddb185: Gotta remove from the file checked in, not Setup
................
  r55251 | neal.norwitz | 2007-05-11 00:53:26 -0700 (Fri, 11 May 2007) | 1 line

  Remove obsolete IRIX modules (as much as I could find, there is probably more)
................
  r55252 | neal.norwitz | 2007-05-11 00:55:35 -0700 (Fri, 11 May 2007) | 1 line

  Remove SGI turd.
................
  r55254 | georg.brandl | 2007-05-11 03:11:01 -0700 (Fri, 11 May 2007) | 2 lines

  Add a case for set comprehensions to the "cannot assign to" switch.
................
  r55255 | georg.brandl | 2007-05-11 03:11:25 -0700 (Fri, 11 May 2007) | 2 lines

  Fix wrong imports.
................
  r55261 | georg.brandl | 2007-05-11 07:37:48 -0700 (Fri, 11 May 2007) | 2 lines

  Remove removed tex files.
................
  r55262 | georg.brandl | 2007-05-11 08:28:41 -0700 (Fri, 11 May 2007) | 2 lines

  Commit PEP 3132 implementation.
................
  r55264 | georg.brandl | 2007-05-11 08:50:19 -0700 (Fri, 11 May 2007) | 2 lines

  Check in the inevitable AST version number and format Py_ssize_t with %zd.
................
  r55265 | neal.norwitz | 2007-05-11 09:12:22 -0700 (Fri, 11 May 2007) | 1 line

  Remove mention of os.popen* and popen2.* since these will be removed.
................
  r55266 | neal.norwitz | 2007-05-11 09:19:57 -0700 (Fri, 11 May 2007) | 1 line

  Get doc to build again (almost, the doc is fine)
................
  r55267 | neal.norwitz | 2007-05-11 09:21:02 -0700 (Fri, 11 May 2007) | 1 line

  Really get doc to build (remove use of string module)
................
  r55269 | neal.norwitz | 2007-05-11 09:29:43 -0700 (Fri, 11 May 2007) | 1 line

  Add some notes to cleanup later
................

11 files changed, 2 insertions, 1428 deletions

diff --git a/Doc/lib/lib.tex b/Doc/lib/lib.tex
index b201039..aa4d3e8 100644
--- a/Doc/lib/lib.tex
+++ b/Doc/lib/lib.tex
@@ -429,22 +429,17 @@ and how to embed it in other applications.
 % OTHER PLATFORM-SPECIFIC STUFF
 % =============
 
+% XXX(nnorwitz): all these modules (down to next comment) need to be (re)moved.
 %\input{libamoeba}              % AMOEBA ONLY
 
 %\input{libstdwin}              % STDWIN ONLY
 
-\input{libsgi}                  % SGI IRIX ONLY
-\input{libal}
-\input{libcd}
-\input{libfl}
-\input{libfm}
-\input{libgl}
-\input{libimgfile}
 \input{libjpeg}
 %\input{libpanel}
 
 \input{libsun}                  % SUNOS ONLY
 \input{libsunaudio}
+% XXX(nnorwitz): the modules below this comment should be kept.
 
 \input{windows}                 % MS Windows ONLY
 \input{libmsilib}
diff --git a/Doc/lib/libal.tex b/Doc/lib/libal.tex
deleted file mode 100644
index e3fdc91..0000000
--- a/Doc/lib/libal.tex
+++ /dev/null
@@ -1,181 +0,0 @@
-\section{\module{al} ---
-         Audio functions on the SGI}
-
-\declaremodule{builtin}{al}
-  \platform{IRIX}
-\modulesynopsis{Audio functions on the SGI.}
-
-
-This module provides access to the audio facilities of the SGI Indy
-and Indigo workstations.  See section 3A of the IRIX man pages for
-details.  You'll need to read those man pages to understand what these
-functions do!  Some of the functions are not available in IRIX
-releases before 4.0.5.  Again, see the manual to check whether a
-specific function is available on your platform.
-
-All functions and methods defined in this module are equivalent to
-the C functions with \samp{AL} prefixed to their name.
-
-Symbolic constants from the C header file \code{<audio.h>} are
-defined in the standard module
-\refmodule[al-constants]{AL}\refstmodindex{AL}, see below.
-
-\warning{The current version of the audio library may dump core
-when bad argument values are passed rather than returning an error
-status.  Unfortunately, since the precise circumstances under which
-this may happen are undocumented and hard to check, the Python
-interface can provide no protection against this kind of problems.
-(One example is specifying an excessive queue size --- there is no
-documented upper limit.)}
-
-The module defines the following functions:
-
-
-\begin{funcdesc}{openport}{name, direction\optional{, config}}
-The name and direction arguments are strings.  The optional
-\var{config} argument is a configuration object as returned by
-\function{newconfig()}.  The return value is an \dfn{audio port
-object}; methods of audio port objects are described below.
-\end{funcdesc}
-
-\begin{funcdesc}{newconfig}{}
-The return value is a new \dfn{audio configuration object}; methods of
-audio configuration objects are described below.
-\end{funcdesc}
-
-\begin{funcdesc}{queryparams}{device}
-The device argument is an integer.  The return value is a list of
-integers containing the data returned by \cfunction{ALqueryparams()}.
-\end{funcdesc}
-
-\begin{funcdesc}{getparams}{device, list}
-The \var{device} argument is an integer.  The list argument is a list
-such as returned by \function{queryparams()}; it is modified in place
-(!).
-\end{funcdesc}
-
-\begin{funcdesc}{setparams}{device, list}
-The \var{device} argument is an integer.  The \var{list} argument is a
-list such as returned by \function{queryparams()}.
-\end{funcdesc}
-
-
-\subsection{Configuration Objects \label{al-config-objects}}
-
-Configuration objects returned by \function{newconfig()} have the
-following methods:
-
-\begin{methoddesc}[audio configuration]{getqueuesize}{}
-Return the queue size.
-\end{methoddesc}
-
-\begin{methoddesc}[audio configuration]{setqueuesize}{size}
-Set the queue size.
-\end{methoddesc}
-
-\begin{methoddesc}[audio configuration]{getwidth}{}
-Get the sample width.
-\end{methoddesc}
-
-\begin{methoddesc}[audio configuration]{setwidth}{width}
-Set the sample width.
-\end{methoddesc}
-
-\begin{methoddesc}[audio configuration]{getchannels}{}
-Get the channel count.
-\end{methoddesc}
-
-\begin{methoddesc}[audio configuration]{setchannels}{nchannels}
-Set the channel count.
-\end{methoddesc}
-
-\begin{methoddesc}[audio configuration]{getsampfmt}{}
-Get the sample format.
-\end{methoddesc}
-
-\begin{methoddesc}[audio configuration]{setsampfmt}{sampfmt}
-Set the sample format.
-\end{methoddesc}
-
-\begin{methoddesc}[audio configuration]{getfloatmax}{}
-Get the maximum value for floating sample formats.
-\end{methoddesc}
-
-\begin{methoddesc}[audio configuration]{setfloatmax}{floatmax}
-Set the maximum value for floating sample formats.
-\end{methoddesc}
-
-
-\subsection{Port Objects \label{al-port-objects}}
-
-Port objects, as returned by \function{openport()}, have the following
-methods:
-
-\begin{methoddesc}[audio port]{closeport}{}
-Close the port.
-\end{methoddesc}
-
-\begin{methoddesc}[audio port]{getfd}{}
-Return the file descriptor as an int.
-\end{methoddesc}
-
-\begin{methoddesc}[audio port]{getfilled}{}
-Return the number of filled samples.
-\end{methoddesc}
-
-\begin{methoddesc}[audio port]{getfillable}{}
-Return the number of fillable samples.
-\end{methoddesc}
-
-\begin{methoddesc}[audio port]{readsamps}{nsamples}
-Read a number of samples from the queue, blocking if necessary.
-Return the data as a string containing the raw data, (e.g., 2 bytes per
-sample in big-endian byte order (high byte, low byte) if you have set
-the sample width to 2 bytes).
-\end{methoddesc}
-
-\begin{methoddesc}[audio port]{writesamps}{samples}
-Write samples into the queue, blocking if necessary.  The samples are
-encoded as described for the \method{readsamps()} return value.
-\end{methoddesc}
-
-\begin{methoddesc}[audio port]{getfillpoint}{}
-Return the `fill point'.
-\end{methoddesc}
-
-\begin{methoddesc}[audio port]{setfillpoint}{fillpoint}
-Set the `fill point'.
-\end{methoddesc}
-
-\begin{methoddesc}[audio port]{getconfig}{}
-Return a configuration object containing the current configuration of
-the port.
-\end{methoddesc}
-
-\begin{methoddesc}[audio port]{setconfig}{config}
-Set the configuration from the argument, a configuration object.
-\end{methoddesc}
-
-\begin{methoddesc}[audio port]{getstatus}{list}
-Get status information on last error.
-\end{methoddesc}
-
-
-\section{\module{AL} ---
-         Constants used with the \module{al} module}
-
-\declaremodule[al-constants]{standard}{AL}
-  \platform{IRIX}
-\modulesynopsis{Constants used with the \module{al} module.}
-
-
-This module defines symbolic constants needed to use the built-in
-module \refmodule{al} (see above); they are equivalent to those defined
-in the C header file \code{<audio.h>} except that the name prefix
-\samp{AL_} is omitted.  Read the module source for a complete list of
-the defined names.  Suggested use:
-
-\begin{verbatim}
-import al
-from AL import *
-\end{verbatim}
diff --git a/Doc/lib/libbsddb.tex b/Doc/lib/libbsddb.tex
index 6e86d24..793237b 100644
--- a/Doc/lib/libbsddb.tex
+++ b/Doc/lib/libbsddb.tex
@@ -94,14 +94,6 @@ interpretation.
 \end{funcdesc}
 
 
-\begin{notice}
-Beginning in 2.3 some \UNIX{} versions of Python may have a \module{bsddb185}
-module.  This is present \emph{only} to allow backwards compatibility with
-systems which ship with the old Berkeley DB 1.85 database library.  The
-\module{bsddb185} module should never be used directly in new code.
-\end{notice}
-
-
 \begin{seealso}
   \seemodule{dbhash}{DBM-style interface to the \module{bsddb}}
 \end{seealso}
diff --git a/Doc/lib/libcd.tex b/Doc/lib/libcd.tex
deleted file mode 100644
index 83bd2ba..0000000
--- a/Doc/lib/libcd.tex
+++ /dev/null
@@ -1,304 +0,0 @@
-\section{\module{cd} ---
-         CD-ROM access on SGI systems}
-
-\declaremodule{builtin}{cd}
-  \platform{IRIX}
-\modulesynopsis{Interface to the CD-ROM on Silicon Graphics systems.}
-
-
-This module provides an interface to the Silicon Graphics CD library.
-It is available only on Silicon Graphics systems.
-
-The way the library works is as follows.  A program opens the CD-ROM
-device with \function{open()} and creates a parser to parse the data
-from the CD with \function{createparser()}.  The object returned by
-\function{open()} can be used to read data from the CD, but also to get
-status information for the CD-ROM device, and to get information about
-the CD, such as the table of contents.  Data from the CD is passed to
-the parser, which parses the frames, and calls any callback
-functions that have previously been added.
-
-An audio CD is divided into \dfn{tracks} or \dfn{programs} (the terms
-are used interchangeably).  Tracks can be subdivided into
-\dfn{indices}.  An audio CD contains a \dfn{table of contents} which
-gives the starts of the tracks on the CD.  Index 0 is usually the
-pause before the start of a track.  The start of the track as given by
-the table of contents is normally the start of index 1.
-
-Positions on a CD can be represented in two ways.  Either a frame
-number or a tuple of three values, minutes, seconds and frames.  Most
-functions use the latter representation.  Positions can be both
-relative to the beginning of the CD, and to the beginning of the
-track.
-
-Module \module{cd} defines the following functions and constants:
-
-
-\begin{funcdesc}{createparser}{}
-Create and return an opaque parser object.  The methods of the parser
-object are described below.
-\end{funcdesc}
-
-\begin{funcdesc}{msftoframe}{minutes, seconds, frames}
-Converts a \code{(\var{minutes}, \var{seconds}, \var{frames})} triple
-representing time in absolute time code into the corresponding CD
-frame number.
-\end{funcdesc}
-
-\begin{funcdesc}{open}{\optional{device\optional{, mode}}}
-Open the CD-ROM device.  The return value is an opaque player object;
-methods of the player object are described below.  The device is the
-name of the SCSI device file, e.g. \code{'/dev/scsi/sc0d4l0'}, or
-\code{None}.  If omitted or \code{None}, the hardware inventory is
-consulted to locate a CD-ROM drive.  The \var{mode}, if not omitted,
-should be the string \code{'r'}.
-\end{funcdesc}
-
-The module defines the following variables:
-
-\begin{excdesc}{error}
-Exception raised on various errors.
-\end{excdesc}
-
-\begin{datadesc}{DATASIZE}
-The size of one frame's worth of audio data.  This is the size of the
-audio data as passed to the callback of type \code{audio}.
-\end{datadesc}
-
-\begin{datadesc}{BLOCKSIZE}
-The size of one uninterpreted frame of audio data.
-\end{datadesc}
-
-The following variables are states as returned by
-\function{getstatus()}:
-
-\begin{datadesc}{READY}
-The drive is ready for operation loaded with an audio CD.
-\end{datadesc}
-
-\begin{datadesc}{NODISC}
-The drive does not have a CD loaded.
-\end{datadesc}
-
-\begin{datadesc}{CDROM}
-The drive is loaded with a CD-ROM.  Subsequent play or read operations
-will return I/O errors.
-\end{datadesc}
-
-\begin{datadesc}{ERROR}
-An error occurred while trying to read the disc or its table of
-contents.
-\end{datadesc}
-
-\begin{datadesc}{PLAYING}
-The drive is in CD player mode playing an audio CD through its audio
-jacks.
-\end{datadesc}
-
-\begin{datadesc}{PAUSED}
-The drive is in CD layer mode with play paused.
-\end{datadesc}
-
-\begin{datadesc}{STILL}
-The equivalent of \constant{PAUSED} on older (non 3301) model Toshiba
-CD-ROM drives.  Such drives have never been shipped by SGI.
-\end{datadesc}
-
-\begin{datadesc}{audio}
-\dataline{pnum}
-\dataline{index}
-\dataline{ptime}
-\dataline{atime}
-\dataline{catalog}
-\dataline{ident}
-\dataline{control}
-Integer constants describing the various types of parser callbacks
-that can be set by the \method{addcallback()} method of CD parser
-objects (see below).
-\end{datadesc}
-
-
-\subsection{Player Objects}
-\label{player-objects}
-
-Player objects (returned by \function{open()}) have the following
-methods:
-
-\begin{methoddesc}[CD player]{allowremoval}{}
-Unlocks the eject button on the CD-ROM drive permitting the user to
-eject the caddy if desired.
-\end{methoddesc}
-
-\begin{methoddesc}[CD player]{bestreadsize}{}
-Returns the best value to use for the \var{num_frames} parameter of
-the \method{readda()} method.  Best is defined as the value that
-permits a continuous flow of data from the CD-ROM drive.
-\end{methoddesc}
-
-\begin{methoddesc}[CD player]{close}{}
-Frees the resources associated with the player object.  After calling
-\method{close()}, the methods of the object should no longer be used.
-\end{methoddesc}
-
-\begin{methoddesc}[CD player]{eject}{}
-Ejects the caddy from the CD-ROM drive.
-\end{methoddesc}
-
-\begin{methoddesc}[CD player]{getstatus}{}
-Returns information pertaining to the current state of the CD-ROM
-drive.  The returned information is a tuple with the following values:
-\var{state}, \var{track}, \var{rtime}, \var{atime}, \var{ttime},
-\var{first}, \var{last}, \var{scsi_audio}, \var{cur_block}.
-\var{rtime} is the time relative to the start of the current track;
-\var{atime} is the time relative to the beginning of the disc;
-\var{ttime} is the total time on the disc.  For more information on
-the meaning of the values, see the man page \manpage{CDgetstatus}{3dm}.
-The value of \var{state} is one of the following: \constant{ERROR},
-\constant{NODISC}, \constant{READY}, \constant{PLAYING},
-\constant{PAUSED}, \constant{STILL}, or \constant{CDROM}.
-\end{methoddesc}
-
-\begin{methoddesc}[CD player]{gettrackinfo}{track}
-Returns information about the specified track.  The returned
-information is a tuple consisting of two elements, the start time of
-the track and the duration of the track.
-\end{methoddesc}
-
-\begin{methoddesc}[CD player]{msftoblock}{min, sec, frame}
-Converts a minutes, seconds, frames triple representing a time in
-absolute time code into the corresponding logical block number for the
-given CD-ROM drive.  You should use \function{msftoframe()} rather than
-\method{msftoblock()} for comparing times.  The logical block number
-differs from the frame number by an offset required by certain CD-ROM
-drives.
-\end{methoddesc}
-
-\begin{methoddesc}[CD player]{play}{start, play}
-Starts playback of an audio CD in the CD-ROM drive at the specified
-track.  The audio output appears on the CD-ROM drive's headphone and
-audio jacks (if fitted).  Play stops at the end of the disc.
-\var{start} is the number of the track at which to start playing the
-CD; if \var{play} is 0, the CD will be set to an initial paused
-state.  The method \method{togglepause()} can then be used to commence
-play.
-\end{methoddesc}
-
-\begin{methoddesc}[CD player]{playabs}{minutes, seconds, frames, play}
-Like \method{play()}, except that the start is given in minutes,
-seconds, and frames instead of a track number.
-\end{methoddesc}
-
-\begin{methoddesc}[CD player]{playtrack}{start, play}
-Like \method{play()}, except that playing stops at the end of the
-track.
-\end{methoddesc}
-
-\begin{methoddesc}[CD player]{playtrackabs}{track, minutes, seconds, frames, play}
-Like \method{play()}, except that playing begins at the specified
-absolute time and ends at the end of the specified track.
-\end{methoddesc}
-
-\begin{methoddesc}[CD player]{preventremoval}{}
-Locks the eject button on the CD-ROM drive thus preventing the user
-from arbitrarily ejecting the caddy.
-\end{methoddesc}
-
-\begin{methoddesc}[CD player]{readda}{num_frames}
-Reads the specified number of frames from an audio CD mounted in the
-CD-ROM drive.  The return value is a string representing the audio
-frames.  This string can be passed unaltered to the
-\method{parseframe()} method of the parser object.
-\end{methoddesc}
-
-\begin{methoddesc}[CD player]{seek}{minutes, seconds, frames}
-Sets the pointer that indicates the starting point of the next read of
-digital audio data from a CD-ROM.  The pointer is set to an absolute
-time code location specified in \var{minutes}, \var{seconds}, and
-\var{frames}.  The return value is the logical block number to which
-the pointer has been set.
-\end{methoddesc}
-
-\begin{methoddesc}[CD player]{seekblock}{block}
-Sets the pointer that indicates the starting point of the next read of
-digital audio data from a CD-ROM.  The pointer is set to the specified
-logical block number.  The return value is the logical block number to
-which the pointer has been set.
-\end{methoddesc}
-
-\begin{methoddesc}[CD player]{seektrack}{track}
-Sets the pointer that indicates the starting point of the next read of
-digital audio data from a CD-ROM.  The pointer is set to the specified
-track.  The return value is the logical block number to which the
-pointer has been set.
-\end{methoddesc}
-
-\begin{methoddesc}[CD player]{stop}{}
-Stops the current playing operation.
-\end{methoddesc}
-
-\begin{methoddesc}[CD player]{togglepause}{}
-Pauses the CD if it is playing, and makes it play if it is paused.
-\end{methoddesc}
-
-
-\subsection{Parser Objects}
-\label{cd-parser-objects}
-
-Parser objects (returned by \function{createparser()}) have the
-following methods:
-
-\begin{methoddesc}[CD parser]{addcallback}{type, func, arg}
-Adds a callback for the parser.  The parser has callbacks for eight
-different types of data in the digital audio data stream.  Constants
-for these types are defined at the \module{cd} module level (see above).
-The callback is called as follows: \code{\var{func}(\var{arg}, type,
-data)}, where \var{arg} is the user supplied argument, \var{type} is
-the particular type of callback, and \var{data} is the data returned
-for this \var{type} of callback.  The type of the data depends on the
-\var{type} of callback as follows:
-
-\begin{tableii}{l|p{4in}}{code}{Type}{Value}
-  \lineii{audio}{String which can be passed unmodified to
-\function{al.writesamps()}.}
-  \lineii{pnum}{Integer giving the program (track) number.}
-  \lineii{index}{Integer giving the index number.}
-  \lineii{ptime}{Tuple consisting of the program time in minutes,
-seconds, and frames.}
-  \lineii{atime}{Tuple consisting of the absolute time in minutes,
-seconds, and frames.}
-  \lineii{catalog}{String of 13 characters, giving the catalog number
-of the CD.}
-  \lineii{ident}{String of 12 characters, giving the ISRC
-identification number of the recording.  The string consists of two
-characters country code, three characters owner code, two characters
-giving the year, and five characters giving a serial number.}
-  \lineii{control}{Integer giving the control bits from the CD
-subcode data}
-\end{tableii}
-\end{methoddesc}
-
-\begin{methoddesc}[CD parser]{deleteparser}{}
-Deletes the parser and frees the memory it was using.  The object
-should not be used after this call.  This call is done automatically
-when the last reference to the object is removed.
-\end{methoddesc}
-
-\begin{methoddesc}[CD parser]{parseframe}{frame}
-Parses one or more frames of digital audio data from a CD such as
-returned by \method{readda()}.  It determines which subcodes are
-present in the data.  If these subcodes have changed since the last
-frame, then \method{parseframe()} executes a callback of the
-appropriate type passing to it the subcode data found in the frame.
-Unlike the \C{} function, more than one frame of digital audio data
-can be passed to this method.
-\end{methoddesc}
-
-\begin{methoddesc}[CD parser]{removecallback}{type}
-Removes the callback for the given \var{type}.
-\end{methoddesc}
-
-\begin{methoddesc}[CD parser]{resetparser}{}
-Resets the fields of the parser used for tracking subcodes to an
-initial state.  \method{resetparser()} should be called after the disc
-has been changed.
-\end{methoddesc}
diff --git a/Doc/lib/libcommands.tex b/Doc/lib/libcommands.tex
index fa9b464..4a5fa55 100644
--- a/Doc/lib/libcommands.tex
+++ b/Doc/lib/libcommands.tex
@@ -35,16 +35,6 @@ Like \function{getstatusoutput()}, except the exit status is ignored
 and the return value is a string containing the command's output.  
 \end{funcdesc}
 
-\begin{funcdesc}{getstatus}{file}
-Return the output of \samp{ls -ld \var{file}} as a string.  This
-function uses the \function{getoutput()} function, and properly
-escapes backslashes and dollar signs in the argument.
-
-\deprecated{2.6}{This function is nonobvious and useless,
-                 also the name is misleading in the presence of
-		 \function{getstatusoutput()}.}
-\end{funcdesc}
-
 Example:
 
 \begin{verbatim}
@@ -57,8 +47,6 @@ Example:
 (256, 'sh: /bin/junk: not found')
 >>> commands.getoutput('ls /bin/ls')
 '/bin/ls'
->>> commands.getstatus('/bin/ls')
-'-rwxr-xr-x  1 root        13352 Oct 14  1994 /bin/ls'
 \end{verbatim}
 
 \begin{seealso}
diff --git a/Doc/lib/libfl.tex b/Doc/lib/libfl.tex
deleted file mode 100644
index bafb8e4..0000000
--- a/Doc/lib/libfl.tex
+++ /dev/null
@@ -1,507 +0,0 @@
-\section{\module{fl} ---
-         FORMS library for graphical user interfaces}
-
-\declaremodule{builtin}{fl}
-  \platform{IRIX}
-\modulesynopsis{FORMS library for applications with graphical user
-                interfaces.}
-
-
-This module provides an interface to the FORMS Library\index{FORMS
-Library} by Mark Overmars\index{Overmars, Mark}.  The source for the
-library can be retrieved by anonymous ftp from host
-\samp{ftp.cs.ruu.nl}, directory \file{SGI/FORMS}.  It was last tested
-with version 2.0b.
-
-Most functions are literal translations of their C equivalents,
-dropping the initial \samp{fl_} from their name.  Constants used by
-the library are defined in module \refmodule[fl-constants]{FL}
-described below.
-
-The creation of objects is a little different in Python than in C:
-instead of the `current form' maintained by the library to which new
-FORMS objects are added, all functions that add a FORMS object to a
-form are methods of the Python object representing the form.
-Consequently, there are no Python equivalents for the C functions
-\cfunction{fl_addto_form()} and \cfunction{fl_end_form()}, and the
-equivalent of \cfunction{fl_bgn_form()} is called
-\function{fl.make_form()}.
-
-Watch out for the somewhat confusing terminology: FORMS uses the word
-\dfn{object} for the buttons, sliders etc. that you can place in a form.
-In Python, `object' means any value.  The Python interface to FORMS
-introduces two new Python object types: form objects (representing an
-entire form) and FORMS objects (representing one button, slider etc.).
-Hopefully this isn't too confusing.
-
-There are no `free objects' in the Python interface to FORMS, nor is
-there an easy way to add object classes written in Python.  The FORMS
-interface to GL event handling is available, though, so you can mix
-FORMS with pure GL windows.
-
-\strong{Please note:} importing \module{fl} implies a call to the GL
-function \cfunction{foreground()} and to the FORMS routine
-\cfunction{fl_init()}.
-
-\subsection{Functions Defined in Module \module{fl}}
-\nodename{FL Functions}
-
-Module \module{fl} defines the following functions.  For more
-information about what they do, see the description of the equivalent
-C function in the FORMS documentation:
-
-\begin{funcdesc}{make_form}{type, width, height}
-Create a form with given type, width and height.  This returns a
-\dfn{form} object, whose methods are described below.
-\end{funcdesc}
-
-\begin{funcdesc}{do_forms}{}
-The standard FORMS main loop.  Returns a Python object representing
-the FORMS object needing interaction, or the special value
-\constant{FL.EVENT}.
-\end{funcdesc}
-
-\begin{funcdesc}{check_forms}{}
-Check for FORMS events.  Returns what \function{do_forms()} above
-returns, or \code{None} if there is no event that immediately needs
-interaction.
-\end{funcdesc}
-
-\begin{funcdesc}{set_event_call_back}{function}
-Set the event callback function.
-\end{funcdesc}
-
-\begin{funcdesc}{set_graphics_mode}{rgbmode, doublebuffering}
-Set the graphics modes.
-\end{funcdesc}
-
-\begin{funcdesc}{get_rgbmode}{}
-Return the current rgb mode.  This is the value of the C global
-variable \cdata{fl_rgbmode}.
-\end{funcdesc}
-
-\begin{funcdesc}{show_message}{str1, str2, str3}
-Show a dialog box with a three-line message and an OK button.
-\end{funcdesc}
-
-\begin{funcdesc}{show_question}{str1, str2, str3}
-Show a dialog box with a three-line message and YES and NO buttons.
-It returns \code{1} if the user pressed YES, \code{0} if NO.
-\end{funcdesc}
-
-\begin{funcdesc}{show_choice}{str1, str2, str3, but1\optional{,
-                              but2\optional{, but3}}}
-Show a dialog box with a three-line message and up to three buttons.
-It returns the number of the button clicked by the user
-(\code{1}, \code{2} or \code{3}).
-\end{funcdesc}
-
-\begin{funcdesc}{show_input}{prompt, default}
-Show a dialog box with a one-line prompt message and text field in
-which the user can enter a string.  The second argument is the default
-input string.  It returns the string value as edited by the user.
-\end{funcdesc}
-
-\begin{funcdesc}{show_file_selector}{message, directory, pattern, default}
-Show a dialog box in which the user can select a file.  It returns
-the absolute filename selected by the user, or \code{None} if the user
-presses Cancel.
-\end{funcdesc}
-
-\begin{funcdesc}{get_directory}{}
-\funcline{get_pattern}{}
-\funcline{get_filename}{}
-These functions return the directory, pattern and filename (the tail
-part only) selected by the user in the last
-\function{show_file_selector()} call.
-\end{funcdesc}
-
-\begin{funcdesc}{qdevice}{dev}
-\funcline{unqdevice}{dev}
-\funcline{isqueued}{dev}
-\funcline{qtest}{}
-\funcline{qread}{}
-%\funcline{blkqread}{?}
-\funcline{qreset}{}
-\funcline{qenter}{dev, val}
-\funcline{get_mouse}{}
-\funcline{tie}{button, valuator1, valuator2}
-These functions are the FORMS interfaces to the corresponding GL
-functions.  Use these if you want to handle some GL events yourself
-when using \function{fl.do_events()}.  When a GL event is detected that
-FORMS cannot handle, \function{fl.do_forms()} returns the special value
-\constant{FL.EVENT} and you should call \function{fl.qread()} to read
-the event from the queue.  Don't use the equivalent GL functions!
-\end{funcdesc}
-
-\begin{funcdesc}{color}{}
-\funcline{mapcolor}{}
-\funcline{getmcolor}{}
-See the description in the FORMS documentation of
-\cfunction{fl_color()}, \cfunction{fl_mapcolor()} and
-\cfunction{fl_getmcolor()}.
-\end{funcdesc}
-
-\subsection{Form Objects}
-\label{form-objects}
-
-Form objects (returned by \function{make_form()} above) have the
-following methods.  Each method corresponds to a C function whose
-name is prefixed with \samp{fl_}; and whose first argument is a form
-pointer; please refer to the official FORMS documentation for
-descriptions.
-
-All the \method{add_*()} methods return a Python object representing
-the FORMS object.  Methods of FORMS objects are described below.  Most
-kinds of FORMS object also have some methods specific to that kind;
-these methods are listed here.
-
-\begin{flushleft}
-
-\begin{methoddesc}[form]{show_form}{placement, bordertype, name}
-  Show the form.
-\end{methoddesc}
-
-\begin{methoddesc}[form]{hide_form}{}
-  Hide the form.
-\end{methoddesc}
-
-\begin{methoddesc}[form]{redraw_form}{}
-  Redraw the form.
-\end{methoddesc}
-
-\begin{methoddesc}[form]{set_form_position}{x, y}
-Set the form's position.
-\end{methoddesc}
-
-\begin{methoddesc}[form]{freeze_form}{}
-Freeze the form.
-\end{methoddesc}
-
-\begin{methoddesc}[form]{unfreeze_form}{}
-  Unfreeze the form.
-\end{methoddesc}
-
-\begin{methoddesc}[form]{activate_form}{}
-  Activate the form.
-\end{methoddesc}
-
-\begin{methoddesc}[form]{deactivate_form}{}
-  Deactivate the form.
-\end{methoddesc}
-
-\begin{methoddesc}[form]{bgn_group}{}
-  Begin a new group of objects; return a group object.
-\end{methoddesc}
-
-\begin{methoddesc}[form]{end_group}{}
-  End the current group of objects.
-\end{methoddesc}
-
-\begin{methoddesc}[form]{find_first}{}
-  Find the first object in the form.
-\end{methoddesc}
-
-\begin{methoddesc}[form]{find_last}{}
-  Find the last object in the form.
-\end{methoddesc}
-
-%---
-
-\begin{methoddesc}[form]{add_box}{type, x, y, w, h, name}
-Add a box object to the form.
-No extra methods.
-\end{methoddesc}
-
-\begin{methoddesc}[form]{add_text}{type, x, y, w, h, name}
-Add a text object to the form.
-No extra methods.
-\end{methoddesc}
-
-%\begin{methoddesc}[form]{add_bitmap}{type, x, y, w, h, name}
-%Add a bitmap object to the form.
-%\end{methoddesc}
-
-\begin{methoddesc}[form]{add_clock}{type, x, y, w, h, name}
-Add a clock object to the form. \\
-Method:
-\method{get_clock()}.
-\end{methoddesc}
-
-%---
-
-\begin{methoddesc}[form]{add_button}{type, x, y, w, h,  name}
-Add a button object to the form. \\
-Methods:
-\method{get_button()},
-\method{set_button()}.
-\end{methoddesc}
-
-\begin{methoddesc}[form]{add_lightbutton}{type, x, y, w, h, name}
-Add a lightbutton object to the form. \\
-Methods:
-\method{get_button()},
-\method{set_button()}.
-\end{methoddesc}
-
-\begin{methoddesc}[form]{add_roundbutton}{type, x, y, w, h, name}
-Add a roundbutton object to the form. \\
-Methods:
-\method{get_button()},
-\method{set_button()}.
-\end{methoddesc}
-
-%---
-
-\begin{methoddesc}[form]{add_slider}{type, x, y, w, h, name}
-Add a slider object to the form. \\
-Methods:
-\method{set_slider_value()},
-\method{get_slider_value()},
-\method{set_slider_bounds()},
-\method{get_slider_bounds()},
-\method{set_slider_return()},
-\method{set_slider_size()},
-\method{set_slider_precision()},
-\method{set_slider_step()}.
-\end{methoddesc}
-
-\begin{methoddesc}[form]{add_valslider}{type, x, y, w, h, name}
-Add a valslider object to the form. \\
-Methods:
-\method{set_slider_value()},
-\method{get_slider_value()},
-\method{set_slider_bounds()},
-\method{get_slider_bounds()},
-\method{set_slider_return()},
-\method{set_slider_size()},
-\method{set_slider_precision()},
-\method{set_slider_step()}.
-\end{methoddesc}
-
-\begin{methoddesc}[form]{add_dial}{type, x, y, w, h, name}
-Add a dial object to the form. \\
-Methods:
-\method{set_dial_value()},
-\method{get_dial_value()},
-\method{set_dial_bounds()},
-\method{get_dial_bounds()}.
-\end{methoddesc}
-
-\begin{methoddesc}[form]{add_positioner}{type, x, y, w, h, name}
-Add a positioner object to the form. \\
-Methods:
-\method{set_positioner_xvalue()},
-\method{set_positioner_yvalue()},
-\method{set_positioner_xbounds()},
-\method{set_positioner_ybounds()},
-\method{get_positioner_xvalue()},
-\method{get_positioner_yvalue()},
-\method{get_positioner_xbounds()},
-\method{get_positioner_ybounds()}.
-\end{methoddesc}
-
-\begin{methoddesc}[form]{add_counter}{type, x, y, w, h, name}
-Add a counter object to the form. \\
-Methods:
-\method{set_counter_value()},
-\method{get_counter_value()},
-\method{set_counter_bounds()},
-\method{set_counter_step()},
-\method{set_counter_precision()},
-\method{set_counter_return()}.
-\end{methoddesc}
-
-%---
-
-\begin{methoddesc}[form]{add_input}{type, x, y, w, h, name}
-Add a input object to the form. \\
-Methods:
-\method{set_input()},
-\method{get_input()},
-\method{set_input_color()},
-\method{set_input_return()}.
-\end{methoddesc}
-
-%---
-
-\begin{methoddesc}[form]{add_menu}{type, x, y, w, h, name}
-Add a menu object to the form. \\
-Methods:
-\method{set_menu()},
-\method{get_menu()},
-\method{addto_menu()}.
-\end{methoddesc}
-
-\begin{methoddesc}[form]{add_choice}{type, x, y, w, h, name}
-Add a choice object to the form. \\
-Methods:
-\method{set_choice()},
-\method{get_choice()},
-\method{clear_choice()},
-\method{addto_choice()},
-\method{replace_choice()},
-\method{delete_choice()},
-\method{get_choice_text()},
-\method{set_choice_fontsize()},
-\method{set_choice_fontstyle()}.
-\end{methoddesc}
-
-\begin{methoddesc}[form]{add_browser}{type, x, y, w, h, name}
-Add a browser object to the form. \\
-Methods:
-\method{set_browser_topline()},
-\method{clear_browser()},
-\method{add_browser_line()},
-\method{addto_browser()},
-\method{insert_browser_line()},
-\method{delete_browser_line()},
-\method{replace_browser_line()},
-\method{get_browser_line()},
-\method{load_browser()},
-\method{get_browser_maxline()},
-\method{select_browser_line()},
-\method{deselect_browser_line()},
-\method{deselect_browser()},
-\method{isselected_browser_line()},
-\method{get_browser()},
-\method{set_browser_fontsize()},
-\method{set_browser_fontstyle()},
-\method{set_browser_specialkey()}.
-\end{methoddesc}
-
-%---
-
-\begin{methoddesc}[form]{add_timer}{type, x, y, w, h, name}
-Add a timer object to the form. \\
-Methods:
-\method{set_timer()},
-\method{get_timer()}.
-\end{methoddesc}
-\end{flushleft}
-
-Form objects have the following data attributes; see the FORMS
-documentation:
-
-\begin{tableiii}{l|l|l}{member}{Name}{C Type}{Meaning}
-  \lineiii{window}{int (read-only)}{GL window id}
-  \lineiii{w}{float}{form width}
-  \lineiii{h}{float}{form height}
-  \lineiii{x}{float}{form x origin}
-  \lineiii{y}{float}{form y origin}
-  \lineiii{deactivated}{int}{nonzero if form is deactivated}
-  \lineiii{visible}{int}{nonzero if form is visible}
-  \lineiii{frozen}{int}{nonzero if form is frozen}
-  \lineiii{doublebuf}{int}{nonzero if double buffering on}
-\end{tableiii}
-
-\subsection{FORMS Objects}
-\label{forms-objects}
-
-Besides methods specific to particular kinds of FORMS objects, all
-FORMS objects also have the following methods:
-
-\begin{methoddesc}[FORMS object]{set_call_back}{function, argument}
-Set the object's callback function and argument.  When the object
-needs interaction, the callback function will be called with two
-arguments: the object, and the callback argument.  (FORMS objects
-without a callback function are returned by \function{fl.do_forms()}
-or \function{fl.check_forms()} when they need interaction.)  Call this
-method without arguments to remove the callback function.
-\end{methoddesc}
-
-\begin{methoddesc}[FORMS object]{delete_object}{}
-  Delete the object.
-\end{methoddesc}
-
-\begin{methoddesc}[FORMS object]{show_object}{}
-  Show the object.
-\end{methoddesc}
-
-\begin{methoddesc}[FORMS object]{hide_object}{}
-  Hide the object.
-\end{methoddesc}
-
-\begin{methoddesc}[FORMS object]{redraw_object}{}
-  Redraw the object.
-\end{methoddesc}
-
-\begin{methoddesc}[FORMS object]{freeze_object}{}
-  Freeze the object.
-\end{methoddesc}
-
-\begin{methoddesc}[FORMS object]{unfreeze_object}{}
-  Unfreeze the object.
-\end{methoddesc}
-
-%\begin{methoddesc}[FORMS object]{handle_object}{} XXX
-%\end{methoddesc}
-
-%\begin{methoddesc}[FORMS object]{handle_object_direct}{} XXX
-%\end{methoddesc}
-
-FORMS objects have these data attributes; see the FORMS documentation:
-
-\begin{tableiii}{l|l|l}{member}{Name}{C Type}{Meaning}
-  \lineiii{objclass}{int (read-only)}{object class}
-  \lineiii{type}{int (read-only)}{object type}
-  \lineiii{boxtype}{int}{box type}
-  \lineiii{x}{float}{x origin}
-  \lineiii{y}{float}{y origin}
-  \lineiii{w}{float}{width}
-  \lineiii{h}{float}{height}
-  \lineiii{col1}{int}{primary color}
-  \lineiii{col2}{int}{secondary color}
-  \lineiii{align}{int}{alignment}
-  \lineiii{lcol}{int}{label color}
-  \lineiii{lsize}{float}{label font size}
-  \lineiii{label}{string}{label string}
-  \lineiii{lstyle}{int}{label style}
-  \lineiii{pushed}{int (read-only)}{(see FORMS docs)}
-  \lineiii{focus}{int (read-only)}{(see FORMS docs)}
-  \lineiii{belowmouse}{int (read-only)}{(see FORMS docs)}
-  \lineiii{frozen}{int (read-only)}{(see FORMS docs)}
-  \lineiii{active}{int (read-only)}{(see FORMS docs)}
-  \lineiii{input}{int (read-only)}{(see FORMS docs)}
-  \lineiii{visible}{int (read-only)}{(see FORMS docs)}
-  \lineiii{radio}{int (read-only)}{(see FORMS docs)}
-  \lineiii{automatic}{int (read-only)}{(see FORMS docs)}
-\end{tableiii}
-
-
-\section{\module{FL} ---
-         Constants used with the \module{fl} module}
-
-\declaremodule[fl-constants]{standard}{FL}
-  \platform{IRIX}
-\modulesynopsis{Constants used with the \module{fl} module.}
-
-
-This module defines symbolic constants needed to use the built-in
-module \refmodule{fl} (see above); they are equivalent to those defined in
-the C header file \code{<forms.h>} except that the name prefix
-\samp{FL_} is omitted.  Read the module source for a complete list of
-the defined names.  Suggested use:
-
-\begin{verbatim}
-import fl
-from FL import *
-\end{verbatim}
-
-
-\section{\module{flp} ---
-         Functions for loading stored FORMS designs}
-
-\declaremodule{standard}{flp}
-  \platform{IRIX}
-\modulesynopsis{Functions for loading stored FORMS designs.}
-
-
-This module defines functions that can read form definitions created
-by the `form designer' (\program{fdesign}) program that comes with the
-FORMS library (see module \refmodule{fl} above).
-
-For now, see the file \file{flp.doc} in the Python library source
-directory for a description.
-
-XXX A complete description should be inserted here!
diff --git a/Doc/lib/libfm.tex b/Doc/lib/libfm.tex
deleted file mode 100644
index 0a0c237..0000000
--- a/Doc/lib/libfm.tex
+++ /dev/null
@@ -1,93 +0,0 @@
-\section{\module{fm} ---
-         \emph{Font Manager} interface}
-
-\declaremodule{builtin}{fm}
-  \platform{IRIX}
-\modulesynopsis{\emph{Font Manager} interface for SGI workstations.}
-
-
-This module provides access to the IRIS \emph{Font Manager} library.
-\index{Font Manager, IRIS}
-\index{IRIS Font Manager}
-It is available only on Silicon Graphics machines.
-See also: \emph{4Sight User's Guide}, section 1, chapter 5: ``Using
-the IRIS Font Manager.''
-
-This is not yet a full interface to the IRIS Font Manager.
-Among the unsupported features are: matrix operations; cache
-operations; character operations (use string operations instead); some
-details of font info; individual glyph metrics; and printer matching.
-
-It supports the following operations:
-
-\begin{funcdesc}{init}{}
-Initialization function.
-Calls \cfunction{fminit()}.
-It is normally not necessary to call this function, since it is called
-automatically the first time the \module{fm} module is imported.
-\end{funcdesc}
-
-\begin{funcdesc}{findfont}{fontname}
-Return a font handle object.
-Calls \code{fmfindfont(\var{fontname})}.
-\end{funcdesc}
-
-\begin{funcdesc}{enumerate}{}
-Returns a list of available font names.
-This is an interface to \cfunction{fmenumerate()}.
-\end{funcdesc}
-
-\begin{funcdesc}{prstr}{string}
-Render a string using the current font (see the \function{setfont()} font
-handle method below).
-Calls \code{fmprstr(\var{string})}.
-\end{funcdesc}
-
-\begin{funcdesc}{setpath}{string}
-Sets the font search path.
-Calls \code{fmsetpath(\var{string})}.
-(XXX Does not work!?!)
-\end{funcdesc}
-
-\begin{funcdesc}{fontpath}{}
-Returns the current font search path.
-\end{funcdesc}
-
-Font handle objects support the following operations:
-
-\begin{methoddesc}[font handle]{scalefont}{factor}
-Returns a handle for a scaled version of this font.
-Calls \code{fmscalefont(\var{fh}, \var{factor})}.
-\end{methoddesc}
-
-\begin{methoddesc}[font handle]{setfont}{}
-Makes this font the current font.
-Note: the effect is undone silently when the font handle object is
-deleted.
-Calls \code{fmsetfont(\var{fh})}.
-\end{methoddesc}
-
-\begin{methoddesc}[font handle]{getfontname}{}
-Returns this font's name.
-Calls \code{fmgetfontname(\var{fh})}.
-\end{methoddesc}
-
-\begin{methoddesc}[font handle]{getcomment}{}
-Returns the comment string associated with this font.
-Raises an exception if there is none.
-Calls \code{fmgetcomment(\var{fh})}.
-\end{methoddesc}
-
-\begin{methoddesc}[font handle]{getfontinfo}{}
-Returns a tuple giving some pertinent data about this font.
-This is an interface to \code{fmgetfontinfo()}.
-The returned tuple contains the following numbers:
-\code{(}\var{printermatched}, \var{fixed_width}, \var{xorig},
-\var{yorig}, \var{xsize}, \var{ysize}, \var{height},
-\var{nglyphs}\code{)}.
-\end{methoddesc}
-
-\begin{methoddesc}[font handle]{getstrwidth}{string}
-Returns the width, in pixels, of \var{string} when drawn in this font.
-Calls \code{fmgetstrwidth(\var{fh}, \var{string})}.
-\end{methoddesc}
diff --git a/Doc/lib/libgl.tex b/Doc/lib/libgl.tex
deleted file mode 100644
index ecf4c36..0000000
--- a/Doc/lib/libgl.tex
+++ /dev/null
@@ -1,224 +0,0 @@
-\section{\module{gl} ---
-         \emph{Graphics Library} interface}
-
-\declaremodule{builtin}{gl}
-  \platform{IRIX}
-\modulesynopsis{Functions from the Silicon Graphics \emph{Graphics Library}.}
-
-
-This module provides access to the Silicon Graphics
-\emph{Graphics Library}.
-It is available only on Silicon Graphics machines.
-
-\warning{Some illegal calls to the GL library cause the Python
-interpreter to dump core.
-In particular, the use of most GL calls is unsafe before the first
-window is opened.}
-
-The module is too large to document here in its entirety, but the
-following should help you to get started.
-The parameter conventions for the C functions are translated to Python as
-follows:
-
-\begin{itemize}
-\item
-All (short, long, unsigned) int values are represented by Python
-integers.
-\item
-All float and double values are represented by Python floating point
-numbers.
-In most cases, Python integers are also allowed.
-\item
-All arrays are represented by one-dimensional Python lists.
-In most cases, tuples are also allowed.
-\item
-\begin{sloppypar}
-All string and character arguments are represented by Python strings,
-for instance,
-\code{winopen('Hi There!')}
-and
-\code{rotate(900, 'z')}.
-\end{sloppypar}
-\item
-All (short, long, unsigned) integer arguments or return values that are
-only used to specify the length of an array argument are omitted.
-For example, the C call
-
-\begin{verbatim}
-lmdef(deftype, index, np, props)
-\end{verbatim}
-
-is translated to Python as
-
-\begin{verbatim}
-lmdef(deftype, index, props)
-\end{verbatim}
-
-\item
-Output arguments are omitted from the argument list; they are
-transmitted as function return values instead.
-If more than one value must be returned, the return value is a tuple.
-If the C function has both a regular return value (that is not omitted
-because of the previous rule) and an output argument, the return value
-comes first in the tuple.
-Examples: the C call
-
-\begin{verbatim}
-getmcolor(i, &red, &green, &blue)
-\end{verbatim}
-
-is translated to Python as
-
-\begin{verbatim}
-red, green, blue = getmcolor(i)
-\end{verbatim}
-
-\end{itemize}
-
-The following functions are non-standard or have special argument
-conventions:
-
-\begin{funcdesc}{varray}{argument}
-%JHXXX the argument-argument added
-Equivalent to but faster than a number of
-\code{v3d()}
-calls.
-The \var{argument} is a list (or tuple) of points.
-Each point must be a tuple of coordinates
-\code{(\var{x}, \var{y}, \var{z})} or \code{(\var{x}, \var{y})}.
-The points may be 2- or 3-dimensional but must all have the
-same dimension.
-Float and int values may be mixed however.
-The points are always converted to 3D double precision points
-by assuming \code{\var{z} = 0.0} if necessary (as indicated in the man page),
-and for each point
-\code{v3d()}
-is called.
-\end{funcdesc}
-
-\begin{funcdesc}{nvarray}{}
-Equivalent to but faster than a number of
-\code{n3f}
-and
-\code{v3f}
-calls.
-The argument is an array (list or tuple) of pairs of normals and points.
-Each pair is a tuple of a point and a normal for that point.
-Each point or normal must be a tuple of coordinates
-\code{(\var{x}, \var{y}, \var{z})}.
-Three coordinates must be given.
-Float and int values may be mixed.
-For each pair,
-\code{n3f()}
-is called for the normal, and then
-\code{v3f()}
-is called for the point.
-\end{funcdesc}
-
-\begin{funcdesc}{vnarray}{}
-Similar to 
-\code{nvarray()}
-but the pairs have the point first and the normal second.
-\end{funcdesc}
-
-\begin{funcdesc}{nurbssurface}{s_k, t_k, ctl, s_ord, t_ord, type}
-% XXX s_k[], t_k[], ctl[][]
-Defines a nurbs surface.
-The dimensions of
-\code{\var{ctl}[][]}
-are computed as follows:
-\code{[len(\var{s_k}) - \var{s_ord}]},
-\code{[len(\var{t_k}) - \var{t_ord}]}.
-\end{funcdesc}
-
-\begin{funcdesc}{nurbscurve}{knots, ctlpoints, order, type}
-Defines a nurbs curve.
-The length of ctlpoints is
-\code{len(\var{knots}) - \var{order}}.
-\end{funcdesc}
-
-\begin{funcdesc}{pwlcurve}{points, type}
-Defines a piecewise-linear curve.
-\var{points}
-is a list of points.
-\var{type}
-must be
-\code{N_ST}.
-\end{funcdesc}
-
-\begin{funcdesc}{pick}{n}
-\funcline{select}{n}
-The only argument to these functions specifies the desired size of the
-pick or select buffer.
-\end{funcdesc}
-
-\begin{funcdesc}{endpick}{}
-\funcline{endselect}{}
-These functions have no arguments.
-They return a list of integers representing the used part of the
-pick/select buffer.
-No method is provided to detect buffer overrun.
-\end{funcdesc}
-
-Here is a tiny but complete example GL program in Python:
-
-\begin{verbatim}
-import gl, GL, time
-
-def main():
-    gl.foreground()
-    gl.prefposition(500, 900, 500, 900)
-    w = gl.winopen('CrissCross')
-    gl.ortho2(0.0, 400.0, 0.0, 400.0)
-    gl.color(GL.WHITE)
-    gl.clear()
-    gl.color(GL.RED)
-    gl.bgnline()
-    gl.v2f(0.0, 0.0)
-    gl.v2f(400.0, 400.0)
-    gl.endline()
-    gl.bgnline()
-    gl.v2f(400.0, 0.0)
-    gl.v2f(0.0, 400.0)
-    gl.endline()
-    time.sleep(5)
-
-main()
-\end{verbatim}
-
-
-\begin{seealso}
-  \seetitle[http://pyopengl.sourceforge.net/]
-           {PyOpenGL: The Python OpenGL Binding}
-           {An interface to OpenGL\index{OpenGL} is also available;
-            see information about the
-            \strong{PyOpenGL}\index{PyOpenGL} project online at
-            \url{http://pyopengl.sourceforge.net/}.  This may be a
-            better option if support for SGI hardware from before
-            about 1996 is not required.}
-\end{seealso}
-
-
-\section{\module{DEVICE} ---
-         Constants used with the \module{gl} module}
-
-\declaremodule{standard}{DEVICE}
-  \platform{IRIX}
-\modulesynopsis{Constants used with the \module{gl} module.}
-
-This modules defines the constants used by the Silicon Graphics
-\emph{Graphics Library} that C programmers find in the header file
-\code{<gl/device.h>}.
-Read the module source file for details.
-
-
-\section{\module{GL} ---
-         Constants used with the \module{gl} module}
-
-\declaremodule[gl-constants]{standard}{GL}
-  \platform{IRIX}
-\modulesynopsis{Constants used with the \module{gl} module.}
-
-This module contains constants used by the Silicon Graphics
-\emph{Graphics Library} from the C header file \code{<gl/gl.h>}.
-Read the module source file for details.
diff --git a/Doc/lib/libimgfile.tex b/Doc/lib/libimgfile.tex
deleted file mode 100644
index 1aad965..0000000
--- a/Doc/lib/libimgfile.tex
+++ /dev/null
@@ -1,66 +0,0 @@
-\section{\module{imgfile} ---
-         Support for SGI imglib files}
-
-\declaremodule{builtin}{imgfile}
-  \platform{IRIX}
-\modulesynopsis{Support for SGI imglib files.}
-
-
-The \module{imgfile} module allows Python programs to access SGI imglib image
-files (also known as \file{.rgb} files).  The module is far from
-complete, but is provided anyway since the functionality that there is
-enough in some cases.  Currently, colormap files are not supported.
-
-The module defines the following variables and functions:
-
-\begin{excdesc}{error}
-This exception is raised on all errors, such as unsupported file type, etc.
-\end{excdesc}
-
-\begin{funcdesc}{getsizes}{file}
-This function returns a tuple \code{(\var{x}, \var{y}, \var{z})} where
-\var{x} and \var{y} are the size of the image in pixels and
-\var{z} is the number of
-bytes per pixel. Only 3 byte RGB pixels and 1 byte greyscale pixels
-are currently supported.
-\end{funcdesc}
-
-\begin{funcdesc}{read}{file}
-This function reads and decodes the image on the specified file, and
-returns it as a Python string. The string has either 1 byte greyscale
-pixels or 4 byte RGBA pixels. The bottom left pixel is the first in
-the string. This format is suitable to pass to \function{gl.lrectwrite()},
-for instance.
-\end{funcdesc}
-
-\begin{funcdesc}{readscaled}{file, x, y, filter\optional{, blur}}
-This function is identical to read but it returns an image that is
-scaled to the given \var{x} and \var{y} sizes. If the \var{filter} and
-\var{blur} parameters are omitted scaling is done by
-simply dropping or duplicating pixels, so the result will be less than
-perfect, especially for computer-generated images.
-
-Alternatively, you can specify a filter to use to smooth the image
-after scaling. The filter forms supported are \code{'impulse'},
-\code{'box'}, \code{'triangle'}, \code{'quadratic'} and
-\code{'gaussian'}. If a filter is specified \var{blur} is an optional
-parameter specifying the blurriness of the filter. It defaults to \code{1.0}.
-
-\function{readscaled()} makes no attempt to keep the aspect ratio
-correct, so that is the users' responsibility.
-\end{funcdesc}
-
-\begin{funcdesc}{ttob}{flag}
-This function sets a global flag which defines whether the scan lines
-of the image are read or written from bottom to top (flag is zero,
-compatible with SGI GL) or from top to bottom(flag is one,
-compatible with X).  The default is zero.
-\end{funcdesc}
-
-\begin{funcdesc}{write}{file, data, x, y, z}
-This function writes the RGB or greyscale data in \var{data} to image
-file \var{file}. \var{x} and \var{y} give the size of the image,
-\var{z} is 1 for 1 byte greyscale images or 3 for RGB images (which are
-stored as 4 byte values of which only the lower three bytes are used).
-These are the formats returned by \function{gl.lrectread()}.
-\end{funcdesc}
diff --git a/Doc/lib/libsgi.tex b/Doc/lib/libsgi.tex
deleted file mode 100644
index ca17ad0..0000000
--- a/Doc/lib/libsgi.tex
+++ /dev/null
@@ -1,7 +0,0 @@
-\chapter{SGI IRIX Specific Services}
-\label{sgi}
-
-The modules described in this chapter provide interfaces to features
-that are unique to SGI's IRIX operating system (versions 4 and 5).
-
-\localmoduletable
diff --git a/Doc/lib/libundoc.tex b/Doc/lib/libundoc.tex
index e7d388f..041e3dd 100644
--- a/Doc/lib/libundoc.tex
+++ b/Doc/lib/libundoc.tex
@@ -46,11 +46,6 @@ document these.
 
 \item[\module{posixpath}]
 --- Implementation of \module{os.path} on \POSIX.
-
-\item[\module{bsddb185}]
---- Backwards compatibility module for systems which still use the Berkeley
-    DB 1.85 module.  It is normally only available on certain BSD \UNIX-based
-    systems.  It should never be used directly.
 \end{description}
 
 
@@ -97,17 +92,3 @@ installing the shared object if using dynamically-loaded extensions.
 --- Measure time intervals to high resolution (use \function{time.clock()}
     instead).
 \end{description}
-
-\section{SGI-specific Extension modules}
-
-The following are SGI specific, and may be out of touch with the
-current version of reality.
-
-\begin{description}
-\item[\module{cl}]
---- Interface to the SGI compression library.
-
-\item[\module{sv}]
---- Interface to the ``simple video'' board on SGI Indigo
-    (obsolete hardware).
-\end{description}