Converted to use semantic markup. This is an example of how many of the new

constructs should be used.

1 files changed, 39 insertions, 36 deletions

diff --git a/Doc/libsignal.tex b/Doc/libsignal.tex
index 2844b57..cbec56f 100644
--- a/Doc/libsignal.tex
+++ b/Doc/libsignal.tex
@@ -11,7 +11,7 @@ Some general rules for working with signals handlers:
 A handler for a particular signal, once set, remains installed until
 it is explicitly reset (i.e. Python emulates the BSD style interface
 regardless of the underlying implementation), with the exception of
-the handler for \code{SIGCHLD}, which follows the underlying
+the handler for \constant{SIGCHLD}, which follows the underlying
 implementation.
 
 \item
@@ -22,7 +22,7 @@ sections (since this is not supported by all \UNIX{} flavors).
 Although Python signal handlers are called asynchronously as far as
 the Python user is concerned, they can only occur between the
 ``atomic'' instructions of the Python interpreter.  This means that
-signals arriving during long calculations implemented purely in C
+signals arriving during long calculations implemented purely in \C{}
 (e.g.\ regular expression matches on large bodies of text) may be
 delayed for an arbitrary amount of time.
 
@@ -33,14 +33,14 @@ This is dependent on the underlying \UNIX{} system's semantics regarding
 interrupted system calls.
 
 \item
-Because the C signal handler always returns, it makes little sense to
-catch synchronous errors like \code{SIGFPE} or \code{SIGSEGV}.
+Because the \C{} signal handler always returns, it makes little sense to
+catch synchronous errors like \constant{SIGFPE} or \constant{SIGSEGV}.
 
 \item
 Python installs a small number of signal handlers by default:
-\code{SIGPIPE} is ignored (so write errors on pipes and sockets can be
-reported as ordinary Python exceptions), \code{SIGINT} is translated
-into a \code{KeyboardInterrupt} exception, and \code{SIGTERM} is
+\constant{SIGPIPE} is ignored (so write errors on pipes and sockets can be
+reported as ordinary Python exceptions), \constant{SIGINT} is translated
+into a \exception{KeyboardInterrupt} exception, and \constant{SIGTERM} is
 caught so that necessary cleanup (especially \code{sys.exitfunc}) can
 be performed before actually terminating.  All of these can be
 overridden.
@@ -48,25 +48,27 @@ overridden.
 \item
 Some care must be taken if both signals and threads are used in the
 same program.  The fundamental thing to remember in using signals and
-threads simultaneously is:\ always perform \code{signal()} operations
+threads simultaneously is:\ always perform \function{signal()} operations
 in the main thread of execution.  Any thread can perform an
-\code{alarm()}, \code{getsignal()}, or \code{pause()}; only the main
-thread can set a new signal handler, and the main thread will be the
-only one to receive signals (this is enforced by the Python signal
-module, even if the underlying thread implementation supports sending
-signals to individual threads).  This means that signals can't be used
-as a means of interthread communication.  Use locks instead.
+\function{alarm()}, \function{getsignal()}, or \function{pause()};
+only the main thread can set a new signal handler, and the main thread
+will be the only one to receive signals (this is enforced by the
+Python \module{signal} module, even if the underlying thread
+implementation supports sending signals to individual threads).  This
+means that signals can't be used as a means of interthread
+communication.  Use locks instead.
 
 \end{itemize}
 
-The variables defined in the signal module are:
+The variables defined in the \module{signal} module are:
 
 \renewcommand{\indexsubitem}{(in module signal)}
 \begin{datadesc}{SIG_DFL}
   This is one of two standard signal handling options; it will simply
   perform the default function for the signal.  For example, on most
-  systems the default action for SIGQUIT is to dump core and exit,
-  while the default action for SIGCLD is to simply ignore it.
+  systems the default action for \constant{SIGQUIT} is to dump core
+  and exit, while the default action for \constant{SIGCLD} is to
+  simply ignore it.
 \end{datadesc}
 
 \begin{datadesc}{SIG_IGN}
@@ -76,12 +78,12 @@ The variables defined in the signal module are:
 
 \begin{datadesc}{SIG*}
   All the signal numbers are defined symbolically.  For example, the
-  hangup signal is defined as \code{signal.SIGHUP}; the variable names
+  hangup signal is defined as \constant{signal.SIGHUP}; the variable names
   are identical to the names used in C programs, as found in
-  \file{signal.h}.
-  The \UNIX{} man page for \file{signal} lists the existing signals (on
-  some systems this is \file{signal(2)}, on others the list is in
-  \file{signal(7)}).
+  \file{<signal.h>}.
+  The \UNIX{} man page for `\cfunction{signal()}' lists the existing
+  signals (on some systems this is \manpage{signal}{2}, on others the
+  list is in \manpage{signal}{7}).
   Note that not all systems define the same set of signal names; only
   those names defined by the system are defined by this module.
 \end{datadesc}
@@ -90,11 +92,11 @@ The variables defined in the signal module are:
   One more than the number of the highest signal number.
 \end{datadesc}
 
-The signal module defines the following functions:
+The \module{signal} module defines the following functions:
 
 \begin{funcdesc}{alarm}{time}
   If \var{time} is non-zero, this function requests that a
-  \code{SIGALRM} signal be sent to the process in \var{time} seconds.
+  \constant{SIGALRM} signal be sent to the process in \var{time} seconds.
   Any previously scheduled alarm is canceled (i.e.\ only one alarm can
   be scheduled at any time).  The returned value is then the number of
   seconds before any previously set alarm was to have been delivered.
@@ -102,36 +104,37 @@ The signal module defines the following functions:
   alarm is canceled.  The return value is the number of seconds
   remaining before a previously scheduled alarm.  If the return value
   is zero, no alarm is currently scheduled.  (See the \UNIX{} man page
-  \code{alarm(2)}.)
+  \manpage{alarm}{2}.)
 \end{funcdesc}
 
 \begin{funcdesc}{getsignal}{signalnum}
   Return the current signal handler for the signal \var{signalnum}.
   The returned value may be a callable Python object, or one of the
-  special values \code{signal.SIG_IGN}, \code{signal.SIG_DFL} or
-  \code{None}.  Here, \code{signal.SIG_IGN} means that the signal was
-  previously ignored, \code{signal.SIG_DFL} means that the default way
-  of handling the signal was previously in use, and \code{None} means
-  that the previous signal handler was not installed from Python.
+  special values \constant{signal.SIG_IGN}, \constant{signal.SIG_DFL} or
+  \constant{None}.  Here, \constant{signal.SIG_IGN} means that the
+  signal was previously ignored, \constant{signal.SIG_DFL} means that the
+  default way of handling the signal was previously in use, and
+  \code{None} means that the previous signal handler was not installed
+  from Python.
 \end{funcdesc}
 
 \begin{funcdesc}{pause}{}
   Cause the process to sleep until a signal is received; the
   appropriate handler will then be called.  Returns nothing.  (See the
-  \UNIX{} man page \code{signal(2)}.)
+  \UNIX{} man page \manpage{signal}{2}.)
 \end{funcdesc}
 
 \begin{funcdesc}{signal}{signalnum\, handler}
   Set the handler for signal \var{signalnum} to the function
   \var{handler}.  \var{handler} can be any callable Python object, or
-  one of the special values \code{signal.SIG_IGN} or
-  \code{signal.SIG_DFL}.  The previous signal handler will be returned
-  (see the description of \code{getsignal()} above).  (See the \UNIX{}
-  man page \code{signal(2)}.)
+  one of the special values \constant{signal.SIG_IGN} or
+  \constant{signal.SIG_DFL}.  The previous signal handler will be returned
+  (see the description of \function{getsignal()} above).  (See the
+  \UNIX{} man page \manpage{signal}{2}.)
 
   When threads are enabled, this function can only be called from the
   main thread; attempting to call it from other threads will cause a
-  \code{ValueError} exception to be raised.
+  \exception{ValueError} exception to be raised.
 
   The \var{handler} is called with two arguments: the signal number
   and the current stack frame (\code{None} or a frame object; see the