summaryrefslogtreecommitdiffstats
path: root/Doc/ref
diff options
context:
space:
mode:
authorFred Drake <fdrake@acm.org>2001-07-06 22:49:53 (GMT)
committerFred Drake <fdrake@acm.org>2001-07-06 22:49:53 (GMT)
commitcb4638a278a205536f558263d5c52ca51613f80b (patch)
tree6788128b1099b81d20ac93344229a13d83b88cff /Doc/ref
parentb2d1006272453566e3283bb277adeb74c6cbd43c (diff)
downloadcpython-cb4638a278a205536f558263d5c52ca51613f80b.zip
cpython-cb4638a278a205536f558263d5c52ca51613f80b.tar.gz
cpython-cb4638a278a205536f558263d5c52ca51613f80b.tar.bz2
Change the grammar productions to use the new productionlist environment;
this supports a hyperlinked version of the grammar that can make tracking down details and definitions a little easier.
Diffstat (limited to 'Doc/ref')
-rw-r--r--Doc/ref/ref2.tex106
-rw-r--r--Doc/ref/ref5.tex244
-rw-r--r--Doc/ref/ref6.tex182
-rw-r--r--Doc/ref/ref7.tex111
-rw-r--r--Doc/ref/ref8.tex28
5 files changed, 410 insertions, 261 deletions
diff --git a/Doc/ref/ref2.tex b/Doc/ref/ref2.tex
index c08f7f4..8a44b03 100644
--- a/Doc/ref/ref2.tex
+++ b/Doc/ref/ref2.tex
@@ -237,13 +237,18 @@ lexical definitions:
\index{identifier}
\index{name}
-\begin{verbatim}
-identifier: (letter|"_") (letter|digit|"_")*
-letter: lowercase | uppercase
-lowercase: "a"..."z"
-uppercase: "A"..."Z"
-digit: "0"..."9"
-\end{verbatim}
+\begin{productionlist}
+ \production{identifier}
+ {(\token{letter}|"_") (\token{letter} | \token{digit} | "_")*}
+ \production{letter}
+ {\token{lowercase} | \token{uppercase}}
+ \production{lowercase}
+ {"a"..."z"}
+ \production{uppercase}
+ {"A"..."Z"}
+ \production{digit}
+ {"0"..."9"}
+\end{productionlist}
Identifiers are unlimited in length. Case is significant.
@@ -303,17 +308,27 @@ Literals are notations for constant values of some built-in types.
String literals are described by the following lexical definitions:
\index{string literal}
-\begin{verbatim}
-stringliteral: shortstring | longstring
-shortstring: "'" shortstringitem* "'" | '"' shortstringitem* '"'
-longstring: "'''" longstringitem* "'''" | '"""' longstringitem* '"""'
-shortstringitem: shortstringchar | escapeseq
-longstringitem: longstringchar | escapeseq
-shortstringchar: <any ASCII character except "\" or newline or the quote>
-longstringchar: <any ASCII character except "\">
-escapeseq: "\" <any ASCII character>
-\end{verbatim}
\index{ASCII@\ASCII{}}
+\begin{productionlist}
+ \production{stringliteral}
+ {\token{shortstring} | \token{longstring}}
+ \production{shortstring}
+ {"'" \token{shortstringitem}* "'"
+ | '"' \token{shortstringitem}* '"'}
+ \production{longstring}
+ {"'''" \token{longstringitem}* "'''"
+ | '"""' \token{longstringitem}* '"""'}
+ \production{shortstringitem}
+ {\token{shortstringchar} | \token{escapeseq}}
+ \production{longstringitem}
+ {\token{longstringchar} | \token{escapeseq}}
+ \production{shortstringchar}
+ {<any ASCII character except "\e" or newline or the quote>}
+ \production{longstringchar}
+ {<any ASCII character except "\e">}
+ \production{escapeseq}
+ {"\e" <any ASCII character>}
+\end{productionlist}
\index{triple-quoted string}
\index{Unicode Consortium}
@@ -452,16 +467,24 @@ Note that numeric literals do not include a sign; a phrase like
Integer and long integer literals are described by the following
lexical definitions:
-\begin{verbatim}
-longinteger: integer ("l"|"L")
-integer: decimalinteger | octinteger | hexinteger
-decimalinteger: nonzerodigit digit* | "0"
-octinteger: "0" octdigit+
-hexinteger: "0" ("x"|"X") hexdigit+
-nonzerodigit: "1"..."9"
-octdigit: "0"..."7"
-hexdigit: digit|"a"..."f"|"A"..."F"
-\end{verbatim}
+\begin{productionlist}
+ \production{longinteger}
+ {\token{integer} ("l" | "L")}
+ \production{integer}
+ {\token{decimalinteger} | \token{octinteger} | \token{hexinteger}}
+ \production{decimalinteger}
+ {\token{nonzerodigit} \token{digit}* | "0"}
+ \production{octinteger}
+ {"0" \token{octdigit}+}
+ \production{hexinteger}
+ {"0" ("x" | "X") \token{hexdigit}+}
+ \production{nonzerodigit}
+ {"1"..."9"}
+ \production{octdigit}
+ {"0"..."7"}
+ \production{hexdigit}
+ {\token{digit} | "a"..."f" | "A"..."F"}
+\end{productionlist}
Although both lower case `l' and upper case `L' are allowed as suffix
for long integers, it is strongly recommended to always use `L', since
@@ -487,14 +510,21 @@ Some examples of plain and long integer literals:
Floating point literals are described by the following lexical
definitions:
-\begin{verbatim}
-floatnumber: pointfloat | exponentfloat
-pointfloat: [intpart] fraction | intpart "."
-exponentfloat: (nonzerodigit digit* | pointfloat) exponent
-intpart: nonzerodigit digit* | "0"
-fraction: "." digit+
-exponent: ("e"|"E") ["+"|"-"] digit+
-\end{verbatim}
+\begin{productionlist}
+ \production{floatnumber}
+ {\token{pointfloat} | \token{exponentfloat}}
+ \production{pointfloat}
+ {[\token{intpart}] \token{fraction} | \token{intpart} "."}
+ \production{exponentfloat}
+ {(\token{nonzerodigit} \token{digit}* | \token{pointfloat})
+ \token{exponent}}
+ \production{intpart}
+ {\token{nonzerodigit} \token{digit}* | "0"}
+ \production{fraction}
+ {"." \token{digit}+}
+ \production{exponent}
+ {("e" | "E") ["+" | "-"] \token{digit}+}
+\end{productionlist}
Note that the integer part of a floating point number cannot look like
an octal integer, though the exponent may look like an octal literal
@@ -517,9 +547,9 @@ Note that numeric literals do not include a sign; a phrase like
Imaginary literals are described by the following lexical definitions:
-\begin{verbatim}
-imagnumber: (floatnumber | intpart) ("j"|"J")
-\end{verbatim}
+\begin{productionlist}
+ \production{imagnumber}{(\token{floatnumber} | \token{intpart}) ("j" | "J")}
+\end{productionlist}
An imaginary literal yields a complex number with a real part of
0.0. Complex numbers are represented as a pair of floating point
diff --git a/Doc/ref/ref5.tex b/Doc/ref/ref5.tex
index c736b0e..5002f4d 100644
--- a/Doc/ref/ref5.tex
+++ b/Doc/ref/ref5.tex
@@ -8,9 +8,9 @@ Python.
BNF\index{BNF} notation will be used to describe syntax, not lexical
analysis. When (one alternative of) a syntax rule has the form
-\begin{verbatim}
-name: othername
-\end{verbatim}
+\begin{productionlist}[*]
+ \production{name}{\token{othername}}
+\end{productionlist}
and no semantics are given, the semantics of this form of \code{name}
are the same as for \code{othername}.
@@ -50,10 +50,13 @@ are identifiers or literals. Forms enclosed in
reverse quotes or in parentheses, brackets or braces are also
categorized syntactically as atoms. The syntax for atoms is:
-\begin{verbatim}
-atom: identifier | literal | enclosure
-enclosure: parenth_form|list_display|dict_display|string_conversion
-\end{verbatim}
+\begin{productionlist}
+ \production{atom}
+ {\token{identifier} | \token{literal} | \token{enclosure}}
+ \production{enclosure}
+ {\token{parenth_form} | \token{list_display}
+ | \token{dict_display} | \token{string_conversion}}
+\end{productionlist}
\subsection{Identifiers (Names)\label{atom-identifiers}}
@@ -107,9 +110,12 @@ consists only of underscores, no transformation is done.
Python supports string literals and various numeric literals:
-\begin{verbatim}
-literal: stringliteral | integer | longinteger | floatnumber | imagnumber
-\end{verbatim}
+\begin{productionlist}
+ \production{literal}
+ {\token{stringliteral} | \token{integer}
+ | \token{longinteger} | \token{floatnumber}
+ | \token{imagnumber}}
+\end{productionlist}
Evaluation of a literal yields an object of the given type (string,
integer, long integer, floating point number, complex number) with the
@@ -132,9 +138,10 @@ the same object or a different object with the same value.
A parenthesized form is an optional expression list enclosed in
parentheses:
-\begin{verbatim}
-parenth_form: "(" [expression_list] ")"
-\end{verbatim}
+\begin{productionlist}
+ \production{parenth_form}
+ {"(" [\token{expression_list}] ")"}
+\end{productionlist}
A parenthesized expression list yields whatever that expression list
yields: if the list contains at least one comma, it yields a tuple;
@@ -162,13 +169,20 @@ pass uncaught.
A list display is a possibly empty series of expressions enclosed in
square brackets:
-\begin{verbatim}
-list_display: "[" [listmaker] "]"
-listmaker: expression ( list_for | ( "," expression)* [","] )
-list_iter: list_for | list_if
-list_for: "for" expression_list "in" testlist [list_iter]
-list_if: "if" test [list_iter]
-\end{verbatim}
+\begin{productionlist}
+ \production{list_display}
+ {"[" [\token{listmaker}] "]"}
+ \production{listmaker}
+ {\token{expression} ( \token{list_for}
+ | ( "," \token{expression})* [","] )}
+ \production{list_iter}
+ {\token{list_for} | \token{list_if}}
+ \production{list_for}
+ {"for" \token{expression_list} "in" \token{testlist}
+ [\token{list_iter}]}
+ \production{list_if}
+ {"if" \token{test} [\token{list_iter}]}
+\end{productionlist}
A list display yields a new list object. Its contents are specified
by providing either a list of expressions or a list comprehension.
@@ -196,11 +210,14 @@ enclosed in curly braces:
\index{datum}
\index{key/datum pair}
-\begin{verbatim}
-dict_display: "{" [key_datum_list] "}"
-key_datum_list: key_datum ("," key_datum)* [","]
-key_datum: expression ":" expression
-\end{verbatim}
+\begin{productionlist}
+ \production{dict_display}
+ {"{" [\token{key_datum_list}] "}"}
+ \production{key_datum_list}
+ {\token{key_datum} ("," \token{key_datum})* [","]}
+ \production{key_datum}
+ {\token{expression} ":" \token{expression}}
+\end{productionlist}
A dictionary display yields a new dictionary object.
\obindex{dictionary}
@@ -226,9 +243,10 @@ stored for a given key value prevails.
A string conversion is an expression list enclosed in reverse (a.k.a.
backward) quotes:
-\begin{verbatim}
-string_conversion: "`" expression_list "`"
-\end{verbatim}
+\begin{productionlist}
+ \production{string_conversion}
+ {"`" \token{expression_list} "`"}
+\end{productionlist}
A string conversion evaluates the contained expression list and
converts the resulting object into a string according to rules
@@ -263,9 +281,11 @@ similar but more user-friendly conversion.
Primaries represent the most tightly bound operations of the language.
Their syntax is:
-\begin{verbatim}
-primary: atom | attributeref | subscription | slicing | call
-\end{verbatim}
+\begin{productionlist}
+ \production{primary}
+ {\token{atom} | \token{attributeref}
+ | \token{subscription} | \token{slicing} | \token{call}}
+\end{productionlist}
\subsection{Attribute references\label{attribute-references}}
@@ -273,9 +293,10 @@ primary: atom | attributeref | subscription | slicing | call
An attribute reference is a primary followed by a period and a name:
-\begin{verbatim}
-attributeref: primary "." identifier
-\end{verbatim}
+\begin{productionlist}
+ \production{attributeref}
+ {\token{primary} "." \token{identifier}}
+\end{productionlist}
The primary must evaluate to an object of a type that supports
attribute references, e.g., a module, list, or an instance. This
@@ -302,9 +323,10 @@ or mapping (dictionary) object:
\obindex{dictionary}
\indexii{sequence}{item}
-\begin{verbatim}
-subscription: primary "[" expression_list "]"
-\end{verbatim}
+\begin{productionlist}
+ \production{subscription}
+ {\token{primary} "[" \token{expression_list} "]"}
+\end{productionlist}
The primary must evaluate to an object of a sequence or mapping type.
@@ -339,20 +361,32 @@ targets in assignment or del statements. The syntax for a slicing:
\obindex{tuple}
\obindex{list}
-\begin{verbatim}
-slicing: simple_slicing | extended_slicing
-simple_slicing: primary "[" short_slice "]"
-extended_slicing: primary "[" slice_list "]"
-slice_list: slice_item ("," slice_item)* [","]
-slice_item: expression | proper_slice | ellipsis
-proper_slice: short_slice | long_slice
-short_slice: [lower_bound] ":" [upper_bound]
-long_slice: short_slice ":" [stride]
-lower_bound: expression
-upper_bound: expression
-stride: expression
-ellipsis: "..."
-\end{verbatim}
+\begin{productionlist}
+ \production{slicing}
+ {\token{simple_slicing} | \token{extended_slicing}}
+ \production{simple_slicing}
+ {\token{primary} "[" \token{short_slice} "]"}
+ \production{extended_slicing}
+ {\token{primary} "[" \token{slice_list} "]" }
+ \production{slice_list}
+ {\token{slice_item} ("," \token{slice_item})* [","]}
+ \production{slice_item}
+ {\token{expression} | \token{proper_slice} | \token{ellipsis}}
+ \production{proper_slice}
+ {\token{short_slice} | \token{long_slice}}
+ \production{short_slice}
+ {[\token{lower_bound}] ":" [\token{upper_bound}]}
+ \production{long_slice}
+ {\token{short_slice} ":" [\token{stride}]}
+ \production{lower_bound}
+ {\token{expression}}
+ \production{upper_bound}
+ {\token{expression}}
+ \production{stride}
+ {\token{expression}}
+ \production{ellipsis}
+ {"..."}
+\end{productionlist}
There is ambiguity in the formal syntax here: anything that looks like
an expression list also looks like a slice list, so any subscription
@@ -401,14 +435,19 @@ A call calls a callable object (e.g., a function) with a possibly empty
series of arguments:
\obindex{callable}
-\begin{verbatim}
-call: primary "(" [argument_list [","]] ")"
-argument_list: positional_arguments ["," keyword_arguments]
- | keyword_arguments
-positional_arguments: expression ("," expression)*
-keyword_arguments: keyword_item ("," keyword_item)*
-keyword_item: identifier "=" expression
-\end{verbatim}
+\begin{productionlist}
+ \production{call}
+ {\token{primary} "(" [\token{argument_list} [","]] ")"}
+ \production{argument_list}
+ {\token{positional_arguments} ["," \token{keyword_arguments}]
+ | \token{keyword_arguments}}
+ \production{positional_arguments}
+ {\token{expression} ("," \token{expression})*}
+ \production{keyword_arguments}
+ {\token{keyword_item} ("," \token{keyword_item})*}
+ \production{keyword_item}
+ {\token{identifier} "=" \token{expression}}
+\end{productionlist}
A trailing comma may be present after an argument list but does not
affect the semantics.
@@ -521,9 +560,10 @@ The power operator binds more tightly than unary operators on its
left; it binds less tightly than unary operators on its right. The
syntax is:
-\begin{verbatim}
-power: primary ["**" u_expr]
-\end{verbatim}
+\begin{productionlist}
+ \production{power}
+ {\token{primary} ["**" \token{u_expr}]}
+\end{productionlist}
Thus, in an unparenthesized sequence of power and unary operators, the
operators are evaluated from right to left (this does not constrain
@@ -545,9 +585,11 @@ power, or a negative floating point number to a broken power), a
All unary arithmetic (and bit-wise) operations have the same priority:
-\begin{verbatim}
-u_expr: power | "-" u_expr | "+" u_expr | "~" u_expr
-\end{verbatim}
+\begin{productionlist}
+ \production{u_expr}
+ {\token{power} | "-" \token{u_expr}
+ | "+" \token{u_expr} | "~" \token{u_expr}}
+\end{productionlist}
The unary \code{-} (minus) operator yields the negation of its
numeric argument.
@@ -578,11 +620,15 @@ non-numeric types. Apart from the power operator, there are only two
levels, one for multiplicative operators and one for additive
operators:
-\begin{verbatim}
-m_expr: u_expr | m_expr "*" u_expr
- | m_expr "/" u_expr | m_expr "%" u_expr
-a_expr: m_expr | aexpr "+" m_expr | aexpr "-" m_expr
-\end{verbatim}
+\begin{productionlist}
+ \production{m_expr}
+ {\token{u_expr} | \token{m_expr} "*" \token{u_expr}
+ | \token{m_expr} "/" \token{u_expr}
+ | \token{m_expr} "\%" \token{u_expr}}
+ \production{a_expr}
+ {\token{m_expr} | \token{aexpr} "+" \token{m_expr}
+ \token{aexpr} "-" \token{m_expr}}
+\end{productionlist}
The \code{*} (multiplication) operator yields the product of its
arguments. The arguments must either both be numbers, or one argument
@@ -646,9 +692,11 @@ type.
The shifting operations have lower priority than the arithmetic
operations:
-\begin{verbatim}
-shift_expr: a_expr | shift_expr ( "<<" | ">>" ) a_expr
-\end{verbatim}
+\begin{productionlist}
+ \production{shift_expr}
+ {\token{a_expr}
+ | \token{shift_expr} ( "<<" | ">>" ) \token{a_expr}}
+\end{productionlist}
These operators accept plain or long integers as arguments. The
arguments are converted to a common type. They shift the first
@@ -670,11 +718,14 @@ exception.
Each of the three bitwise operations has a different priority level:
-\begin{verbatim}
-and_expr: shift_expr | and_expr "&" shift_expr
-xor_expr: and_expr | xor_expr "^" and_expr
-or_expr: xor_expr | or_expr "|" xor_expr
-\end{verbatim}
+\begin{productionlist}
+ \production{and_expr}
+ {\token{shift_expr} | \token{and_expr} "\&" \token{shift_expr}}
+ \production{xor_expr}
+ {\token{and_expr} | \token{xor_expr} "\textasciicircum" \token{and_expr}}
+ \production{or_expr}
+ {\token{xor_expr} | \token{or_expr} "|" \token{xor_expr}}
+\end{productionlist}
The \code{\&} operator yields the bitwise AND of its arguments, which
must be plain or long integers. The arguments are converted to a
@@ -703,10 +754,13 @@ operation. Also unlike C, expressions like \code{a < b < c} have the
interpretation that is conventional in mathematics:
\indexii{C}{language}
-\begin{verbatim}
-comparison: or_expr (comp_operator or_expr)*
-comp_operator: "<"|">"|"=="|">="|"<="|"<>"|"!="|"is" ["not"]|["not"] "in"
-\end{verbatim}
+\begin{productionlist}
+ \production{comparison}
+ {\token{or_expr} ( \token{comp_operator} \token{or_expr} )*}
+ \production{comp_operator}
+ {"<" | ">" | "==" | ">=" | "<=" | "<>" | "!="
+ | "is" ["not"] | ["not"] "in"}
+\end{productionlist}
Comparisons yield integer values: \code{1} for true, \code{0} for false.
@@ -830,13 +884,18 @@ truth value.
Boolean operations have the lowest priority of all Python operations:
-\begin{verbatim}
-expression: or_test | lambda_form
-or_test: and_test | or_test "or" and_test
-and_test: not_test | and_test "and" not_test
-not_test: comparison | "not" not_test
-lambda_form: "lambda" [parameter_list]: expression
-\end{verbatim}
+\begin{productionlist}
+ \production{expression}
+ {\token{or_test} | \token{lambda_form}}
+ \production{or_test}
+ {\token{and_test} | \token{or_test} "or" \token{and_test}}
+ \production{and_test}
+ {\token{not_test} | \token{and_test} "and" \token{not_test}}
+ \production{not_test}
+ {\token{comparison} | "not" \token{not_test}}
+ \production{lambda_form}
+ {"lambda" [\token{parameter_list}]: \token{expression}}
+\end{productionlist}
In the context of Boolean operations, and also when expressions are
used by control flow statements, the following values are interpreted
@@ -914,9 +973,10 @@ def make_incrementor(increment):
\section{Expression lists\label{exprlists}}
\indexii{expression}{list}
-\begin{verbatim}
-expression_list: expression ("," expression)* [","]
-\end{verbatim}
+\begin{productionlist}
+ \production{expression_list}
+ {\token{expression} ( "," \token{expression} )* [","]}
+\end{productionlist}
An expression list containing at least one comma yields a
tuple. The length of the tuple is the number of expressions in the
diff --git a/Doc/ref/ref6.tex b/Doc/ref/ref6.tex
index 9922fe7..d96a670 100644
--- a/Doc/ref/ref6.tex
+++ b/Doc/ref/ref6.tex
@@ -5,22 +5,23 @@ Simple statements are comprised within a single logical line.
Several simple statements may occur on a single line separated
by semicolons. The syntax for simple statements is:
-\begin{verbatim}
-simple_stmt: expression_stmt
- | assert_stmt
- | assignment_stmt
- | augmented_assignment_stmt
- | pass_stmt
- | del_stmt
- | print_stmt
- | return_stmt
- | raise_stmt
- | break_stmt
- | continue_stmt
- | import_stmt
- | global_stmt
- | exec_stmt
-\end{verbatim}
+\begin{productionlist}
+ \production{simple_stmt}
+ {\token{expression_stmt}
+ | \token{assert_stmt}
+ | \token{assignment_stmt}
+ | \token{augmented_assignment_stmt}
+ | \token{pass_stmt}
+ | \token{del_stmt}
+ | \token{print_stmt}
+ | \token{return_stmt}
+ | \token{raise_stmt}
+ | \token{break_stmt}
+ | \token{continue_stmt}
+ | \token{import_stmt}
+ | \token{global_stmt}
+ | \token{exec_stmt}}
+\end{productionlist}
\section{Expression statements \label{exprstmts}}
@@ -32,9 +33,10 @@ returns no meaningful result; in Python, procedures return the value
\code{None}). Other uses of expression statements are allowed and
occasionally useful. The syntax for an expression statement is:
-\begin{verbatim}
-expression_stmt: expression_list
-\end{verbatim}
+\begin{productionlist}
+ \production{expression_stmt}
+ {\token{expression_list}}
+\end{productionlist}
An expression statement evaluates the expression list (which may be a
single expression).
@@ -59,9 +61,10 @@ any output.)
Assert statements\stindex{assert} are a convenient way to insert
debugging assertions\indexii{debugging}{assertions} into a program:
-\begin{verbatim}
-assert_statement: "assert" expression ["," expression]
-\end{verbatim}
+\begin{productionlist}
+ \production{assert_statement}
+ {"assert" \token{expression} ["," \token{expression}]}
+\end{productionlist}
The simple form, \samp{assert expression}, is equivalent to
@@ -102,12 +105,19 @@ objects:
\obindex{mutable}
\indexii{attribute}{assignment}
-\begin{verbatim}
-assignment_stmt: (target_list "=")+ expression_list
-target_list: target ("," target)* [","]
-target: identifier | "(" target_list ")" | "[" target_list "]"
- | attributeref | subscription | slicing
-\end{verbatim}
+\begin{productionlist}
+ \production{assignment_stmt}
+ {(\token{target_list} "=")+ \token{expression_list}}
+ \production{target_list}
+ {\token{target} ("," \token{target})* [","]}
+ \production{target}
+ {\token{identifier}
+ | "(" \token{target_list} ")"
+ | "[" \token{target_list} "]"
+ | \token{attributeref}
+ | \token{subscription}
+ | \token{slicing}}
+\end{productionlist}
(See section \ref{primaries} for the syntax definitions for the last
three symbols.)
@@ -260,13 +270,20 @@ operation and an assignment statement:
\indexii{augmented}{assignment}
\index{statement!assignment, augmented}
-\begin{verbatim}
-augmented_assignment_stmt: target augop expression_list
-augop: "+=" | "-=" | "*=" | "/=" | "%=" | "**="
- | ">>=" | "<<=" | "&=" | "^=" | "|="
-target: identifier | "(" target_list ")" | "[" target_list "]"
- | attributeref | subscription | slicing
-\end{verbatim}
+\begin{productionlist}
+ \production{augmented_assignment_stmt}
+ {\token{target} \token{augop} \token{expression_list}}
+ \production{augop}
+ {"+=" | "-=" | "*=" | "/=" | "\%=" | "**="
+ | ">>=" | "<<=" | "\&=" | "\textasciicircum=" | "|="}
+ \production{target}
+ {\token{identifier}
+ | "(" \token{target_list} ")"
+ | "[" \token{target_list} "]"
+ | \token{attributeref}
+ | \token{subscription}
+ | \token{slicing}}
+\end{productionlist}
(See section \ref{primaries} for the syntax definitions for the last
three symbols.)
@@ -294,9 +311,10 @@ augmented assignment is the same as the normal binary operations.
\section{The \keyword{pass} statement \label{pass}}
\stindex{pass}
-\begin{verbatim}
-pass_stmt: "pass"
-\end{verbatim}
+\begin{productionlist}
+ \production{pass_stmt}
+ {"pass"}
+\end{productionlist}
\keyword{pass} is a null operation --- when it is executed, nothing
happens. It is useful as a placeholder when a statement is
@@ -313,9 +331,10 @@ class C: pass # a class with no methods (yet)
\section{The \keyword{del} statement \label{del}}
\stindex{del}
-\begin{verbatim}
-del_stmt: "del" target_list
-\end{verbatim}
+\begin{productionlist}
+ \production{del_stmt}
+ {"del" \token{target_list}}
+\end{productionlist}
Deletion is recursively defined very similar to the way assignment is
defined. Rather that spelling it out in full details, here are some
@@ -342,9 +361,12 @@ right type (but even this is determined by the sliced object).
\section{The \keyword{print} statement \label{print}}
\stindex{print}
-\begin{verbatim}
-print_stmt: "print" [ expression ("," expression)* [","] ]
-\end{verbatim}
+\begin{productionlist}
+ \production{print_stmt}
+ {"print" ( \optional{\token{expression} ("," \token{expression})* \optional{","}}
+ | ">\code{>}" \token{expression}
+ \optional{("," \token{expression})+ \optional{","}})}
+\end{productionlist}
\keyword{print} evaluates each expression in turn and writes the
resulting object to standard output (see below). If an object is not
@@ -376,13 +398,9 @@ exception is raised.
\withsubitem{(in module sys)}{\ttindex{stdout}}
\exindex{RuntimeError}
-\keyword{print} also has an extended form, defined as
-\index{extended print statement}
-
-\begin{verbatim}
-print_stmt: "print" ">>" expression [ ("," expression)+ [","] ]
-\end{verbatim}
-
+\keyword{print} also has an extended\index{extended print statement}
+form, defined by the second portion of the syntax described above.
+This form is sometimes referred to as ``\keyword{print} chevron.''
In this form, the first expression after the \code{>}\code{>} must
evaluate to a ``file-like'' object, specifically an object that has a
\method{write()} method as described above. With this extended form,
@@ -394,9 +412,10 @@ used as the file for output.
\section{The \keyword{return} statement \label{return}}
\stindex{return}
-\begin{verbatim}
-return_stmt: "return" [expression_list]
-\end{verbatim}
+\begin{productionlist}
+ \production{return_stmt}
+ {"return" [\token{expression_list}]}
+\end{productionlist}
\keyword{return} may only occur syntactically nested in a function
definition, not within a nested class definition.
@@ -418,9 +437,11 @@ before really leaving the function.
\section{The \keyword{raise} statement \label{raise}}
\stindex{raise}
-\begin{verbatim}
-raise_stmt: "raise" [expression ["," expression ["," expression]]]
-\end{verbatim}
+\begin{productionlist}
+ \production{raise_stmt}
+ {"raise" [\token{expression} ["," \token{expression}
+ ["," \token{expression}]]]}
+\end{productionlist}
If no expressions are present, \keyword{raise} re-raises the last
expression that was raised in the current scope.
@@ -459,9 +480,10 @@ transparently in an except clause.
\section{The \keyword{break} statement \label{break}}
\stindex{break}
-\begin{verbatim}
-break_stmt: "break"
-\end{verbatim}
+\begin{productionlist}
+ \production{break_stmt}
+ {"break"}
+\end{productionlist}
\keyword{break} may only occur syntactically nested in a \keyword{for}
or \keyword{while} loop, but not nested in a function or class definition
@@ -487,9 +509,10 @@ before really leaving the loop.
\section{The \keyword{continue} statement \label{continue}}
\stindex{continue}
-\begin{verbatim}
-continue_stmt: "continue"
-\end{verbatim}
+\begin{productionlist}
+ \production{continue_stmt}
+ {"continue"}
+\end{productionlist}
\keyword{continue} may only occur syntactically nested in a \keyword{for} or
\keyword{while} loop, but not nested in a function or class definition or
@@ -507,13 +530,17 @@ It continues with the next cycle of the nearest enclosing loop.
\section{The \keyword{import} statement \label{import}}
\stindex{import}
-\begin{verbatim}
-import_stmt: "import" module ["as" name] ("," module ["as" name] )*
- | "from" module "import" identifier ["as" name]
- ("," identifier ["as" name] )*
- | "from" module "import" "*"
-module: (identifier ".")* identifier
-\end{verbatim}
+\begin{productionlist}
+ \production{import_stmt}
+ {"import" \token{module} ["as" \token{name}]
+ ( "," \token{module} ["as" \token{name}] )*
+ | "from" \token{module} "import" \token{identifier}
+ ["as" \token{name}]
+ ( "," \token{identifier} ["as" \token{name}] )*
+ | "from" \token{module} "import" "*"}
+ \production{module}
+ {(\token{identifier} ".")* \token{identifier}}
+\end{productionlist}
Import statements are executed in two steps: (1) find a module, and
initialize it if necessary; (2) define a name or names in the local
@@ -608,9 +635,10 @@ about how the module search works from inside a package.]
\section{The \keyword{global} statement \label{global}}
\stindex{global}
-\begin{verbatim}
-global_stmt: "global" identifier ("," identifier)*
-\end{verbatim}
+\begin{productionlist}
+ \production{global_stmt}
+ {"global" \token{identifier} ("," \token{identifier})*}
+\end{productionlist}
The \keyword{global} statement is a declaration which holds for the
entire current code block. It means that the listed identifiers are to be
@@ -649,9 +677,11 @@ containing the \keyword{exec} statement. The same applies to the
\section{The \keyword{exec} statement \label{exec}}
\stindex{exec}
-\begin{verbatim}
-exec_stmt: "exec" expression ["in" expression ["," expression]]
-\end{verbatim}
+\begin{productionlist}
+ \production{exec_stmt}
+ {"exec" \token{expression}
+ ["in" \token{expression} ["," \token{expression}]]}
+\end{productionlist}
This statement supports dynamic execution of Python code. The first
expression should evaluate to either a string, an open file object, or
diff --git a/Doc/ref/ref7.tex b/Doc/ref/ref7.tex
index e43faec..c9e33f9 100644
--- a/Doc/ref/ref7.tex
+++ b/Doc/ref/ref7.tex
@@ -40,13 +40,18 @@ if x < y < z: print x; print y; print z
Summarizing:
-\begin{verbatim}
-compound_stmt: if_stmt | while_stmt | for_stmt
- | try_stmt | funcdef | classdef
-suite: stmt_list NEWLINE | NEWLINE INDENT statement+ DEDENT
-statement: stmt_list NEWLINE | compound_stmt
-stmt_list: simple_stmt (";" simple_stmt)* [";"]
-\end{verbatim}
+\begin{productionlist}
+ \production{compound_stmt}
+ {\token{if_stmt} | \token{while_stmt} | \token{for_stmt}
+ | \token{try_stmt} | \token{funcdef} | \token{classdef}}
+ \production{suite}
+ {\token{stmt_list} NEWLINE
+ | NEWLINE INDENT \token{statement}+ DEDENT}
+ \production{statement}
+ {\token{stmt_list} NEWLINE | \token{compound_stmt}}
+ \production{stmt_list}
+ {\token{simple_stmt} (";" \token{simple_stmt})* [";"]}
+\end{productionlist}
Note that statements always end in a
\code{NEWLINE}\index{NEWLINE token} possibly followed by a
@@ -66,11 +71,12 @@ each clause on a separate line for clarity.
The \keyword{if} statement is used for conditional execution:
-\begin{verbatim}
-if_stmt: "if" expression ":" suite
- ("elif" expression ":" suite)*
- ["else" ":" suite]
-\end{verbatim}
+\begin{productionlist}
+ \production{if_stmt}
+ {"if" \token{expression} ":" \token{suite}
+ ( "elif" \token{expression} ":" \token{suite} )*
+ ["else" ":" \token{suite}]}
+\end{productionlist}
It selects exactly one of the suites by evaluating the expressions one
by one until one is found to be true (see section \ref{Booleans} for
@@ -89,10 +95,11 @@ present, is executed.
The \keyword{while} statement is used for repeated execution as long
as an expression is true:
-\begin{verbatim}
-while_stmt: "while" expression ":" suite
- ["else" ":" suite]
-\end{verbatim}
+\begin{productionlist}
+ \production{while_stmt}
+ {"while" \token{expression} ":" \token{suite}
+ ["else" ":" \token{suite}]}
+\end{productionlist}
This repeatedly tests the expression and, if it is true, executes the
first suite; if the expression is false (which may be the first time it
@@ -116,10 +123,12 @@ The \keyword{for} statement is used to iterate over the elements of a
sequence (such as a string, tuple or list) or other iterable object:
\obindex{sequence}
-\begin{verbatim}
-for_stmt: "for" target_list "in" expression_list ":" suite
- ["else" ":" suite]
-\end{verbatim}
+\begin{productionlist}
+ \production{for_stmt}
+ {"for" \token{target_list} "in" \token{expression_list}
+ ":" \token{suite}
+ ["else" ":" \token{suite}]}
+\end{productionlist}
The expression list is evaluated once; it should yield a sequence. The
suite is then executed once for each item in the sequence, in the
@@ -179,14 +188,18 @@ for x in a[:]:
The \keyword{try} statement specifies exception handlers and/or cleanup
code for a group of statements:
-\begin{verbatim}
-try_stmt: try_exc_stmt | try_fin_stmt
-try_exc_stmt: "try" ":" suite
- ("except" [expression ["," target]] ":" suite)+
- ["else" ":" suite]
-try_fin_stmt: "try" ":" suite
- "finally" ":" suite
-\end{verbatim}
+\begin{productionlist}
+ \production{try_stmt}
+ {\token{try_exc_stmt} | \token{try_fin_stmt}}
+ \production{try_exc_stmt}
+ {"try" ":" \token{suite}
+ ("except" [\token{expression} ["," \token{target}]] ":"
+ \token{suite})+
+ ["else" ":" \token{suite}]}
+ \production{try_fin_stmt}
+ {"try" ":" \token{suite}
+ "finally" ":" \token{suite}}
+\end{productionlist}
There are two forms of \keyword{try} statement:
\keyword{try}...\keyword{except} and
@@ -291,16 +304,24 @@ section \ref{types}):
\obindex{user-defined function}
\obindex{function}
-\begin{verbatim}
-funcdef: "def" funcname "(" [parameter_list] ")" ":" suite
-parameter_list: (defparameter ",")* ("*" identifier [, "**" identifier]
- | "**" identifier
- | defparameter [","])
-defparameter: parameter ["=" expression]
-sublist: parameter ("," parameter)* [","]
-parameter: identifier | "(" sublist ")"
-funcname: identifier
-\end{verbatim}
+\begin{productionlist}
+ \production{funcdef}
+ {"def" \token{funcname} "(" [\token{parameter_list}] ")"
+ ":" \token{suite}}
+ \production{parameter_list}
+ {(\token{defparameter} ",")*
+ ("*" \token{identifier} [, "**" \token{identifier}]
+ | "**" \token{identifier}
+ | \token{defparameter} [","])}
+ \production{defparameter}
+ {\token{parameter} ["=" \token{expression}]}
+ \production{sublist}
+ {\token{parameter} ("," \token{parameter})* [","]}
+ \production{parameter}
+ {\token{identifier} | "(" \token{sublist} ")"}
+ \production{funcname}
+ {\token{identifier}}
+\end{productionlist}
A function definition is an executable statement. Its execution binds
the function name in the current local namespace to a function object
@@ -376,11 +397,15 @@ description of the new semantics.
A class definition defines a class object (see section \ref{types}):
\obindex{class}
-\begin{verbatim}
-classdef: "class" classname [inheritance] ":" suite
-inheritance: "(" [expression_list] ")"
-classname: identifier
-\end{verbatim}
+\begin{productionlist}
+ \production{classdef}
+ {"class" \token{classname} [\token{inheritance}] ":"
+ \token{suite}}
+ \production{inheritance}
+ {"(" [\token{expression_list}] ")"}
+ \production{classname}
+ {\token{identifier}}
+\end{productionlist}
A class definition is an executable statement. It first evaluates the
inheritance list, if present. Each item in the inheritance list
diff --git a/Doc/ref/ref8.tex b/Doc/ref/ref8.tex
index 24d10b1..d10c87f 100644
--- a/Doc/ref/ref8.tex
+++ b/Doc/ref/ref8.tex
@@ -49,9 +49,10 @@ program.
All input read from non-interactive files has the same form:
-\begin{verbatim}
-file_input: (NEWLINE | statement)*
-\end{verbatim}
+\begin{productionlist}
+ \production{file_input}
+ {(NEWLINE | \token{statement})*}
+\end{productionlist}
This syntax is used in the following situations:
@@ -70,9 +71,10 @@ This syntax is used in the following situations:
Input in interactive mode is parsed using the following grammar:
-\begin{verbatim}
-interactive_input: [stmt_list] NEWLINE | compound_stmt NEWLINE
-\end{verbatim}
+\begin{productionlist}
+ \production{interactive_input}
+ {[\token{stmt_list}] NEWLINE | \token{compound_stmt} NEWLINE}
+\end{productionlist}
Note that a (top-level) compound statement must be followed by a blank
line in interactive mode; this is needed to help the parser detect the
@@ -87,16 +89,18 @@ whitespace.
The string argument to \function{eval()} must have the following form:
\bifuncindex{eval}
-\begin{verbatim}
-eval_input: expression_list NEWLINE*
-\end{verbatim}
+\begin{productionlist}
+ \production{eval_input}
+ {\token{expression_list} NEWLINE*}
+\end{productionlist}
The input line read by \function{input()} must have the following form:
\bifuncindex{input}
-\begin{verbatim}
-input_input: expression_list NEWLINE
-\end{verbatim}
+\begin{productionlist}
+ \production{input_input}
+ {\token{expression_list} NEWLINE}
+\end{productionlist}
Note: to read `raw' input line without interpretation, you can use the
built-in function \function{raw_input()} or the \method{readline()} method