Issue #28763: Use double hyphens (rendered as en-dashes) in numerical ranges

in the documentation.

17 files changed, 25 insertions, 25 deletions

diff --git a/Doc/faq/design.rst b/Doc/faq/design.rst
index 1b6cd7e..108df6d 100644
--- a/Doc/faq/design.rst
+++ b/Doc/faq/design.rst
@@ -31,7 +31,7 @@ least slightly uneasy when reading (or being required to write) another style.
 Many coding styles place begin/end brackets on a line by themselves.  This makes
 programs considerably longer and wastes valuable screen space, making it harder
 to get a good overview of a program.  Ideally, a function should fit on one
-screen (say, 20-30 lines).  20 lines of Python can do a lot more work than 20
+screen (say, 20--30 lines).  20 lines of Python can do a lot more work than 20
 lines of C.  This is not solely due to the lack of begin/end brackets -- the
 lack of declarations and the high-level data types are also responsible -- but
 the indentation-based syntax certainly helps.
@@ -77,7 +77,7 @@ which is exactly::
 
     1.1999999999999999555910790149937383830547332763671875 (decimal)
 
-The typical precision of 53 bits provides Python floats with 15-16
+The typical precision of 53 bits provides Python floats with 15--16
 decimal digits of accuracy.
 
 For a fuller explanation, please see the :ref:`floating point arithmetic
diff --git a/Doc/faq/general.rst b/Doc/faq/general.rst
index 3f96700..f1e33af 100644
--- a/Doc/faq/general.rst
+++ b/Doc/faq/general.rst
@@ -252,7 +252,7 @@ outdated.
 
     Guido van Rossum and Jelke de Boer, "Interactively Testing Remote Servers
     Using the Python Programming Language", CWI Quarterly, Volume 4, Issue 4
-    (December 1991), Amsterdam, pp 283-303.
+    (December 1991), Amsterdam, pp 283--303.
 
 
 Are there any books on Python?
diff --git a/Doc/howto/urllib2.rst b/Doc/howto/urllib2.rst
index d2c7991..712b4b7 100644
--- a/Doc/howto/urllib2.rst
+++ b/Doc/howto/urllib2.rst
@@ -240,8 +240,8 @@ Error Codes
 ~~~~~~~~~~~
 
 Because the default handlers handle redirects (codes in the 300 range), and
-codes in the 100-299 range indicate success, you will usually only see error
-codes in the 400-599 range.
+codes in the 100--299 range indicate success, you will usually only see error
+codes in the 400--599 range.
 
 :attr:`http.server.BaseHTTPRequestHandler.responses` is a useful dictionary of
 response codes in that shows all the response codes used by RFC 2616. The
diff --git a/Doc/library/calendar.rst b/Doc/library/calendar.rst
index df76e33..41e9e28 100644
--- a/Doc/library/calendar.rst
+++ b/Doc/library/calendar.rst
@@ -47,7 +47,7 @@ it's the base calendar for all computations.
 
    .. method:: itermonthdates(year, month)
 
-      Return an iterator for the month *month* (1-12) in the year *year*. This
+      Return an iterator for the month *month* (1--12) in the year *year*. This
       iterator will return all days (as :class:`datetime.date` objects) for the
       month and all days before the start of the month or after the end of the
       month that are required to get a complete week.
diff --git a/Doc/library/cmath.rst b/Doc/library/cmath.rst
index 62ddb6b..e113ffc 100644
--- a/Doc/library/cmath.rst
+++ b/Doc/library/cmath.rst
@@ -275,6 +275,6 @@ cuts for numerical purposes, a good reference should be the following:
 
    Kahan, W:  Branch cuts for complex elementary functions; or, Much ado about
    nothing's sign bit.  In Iserles, A., and Powell, M. (eds.), The state of the art
-   in numerical analysis. Clarendon Press (1987) pp165-211.
+   in numerical analysis. Clarendon Press (1987) pp165--211.
 
 
diff --git a/Doc/library/codecs.rst b/Doc/library/codecs.rst
index 03f0228..f38e41b 100644
--- a/Doc/library/codecs.rst
+++ b/Doc/library/codecs.rst
@@ -858,7 +858,7 @@ Encodings and Unicode
 ---------------------
 
 Strings are stored internally as sequences of code points in
-range ``0x0``-``0x10FFFF``.  (See :pep:`393` for
+range ``0x0``--``0x10FFFF``.  (See :pep:`393` for
 more details about the implementation.)
 Once a string object is used outside of CPU and memory, endianness
 and how these arrays are stored as bytes become an issue.  As with other
@@ -868,7 +868,7 @@ There are a variety of different text serialisation codecs, which are
 collectivity referred to as :term:`text encodings <text encoding>`.
 
 The simplest text encoding (called ``'latin-1'`` or ``'iso-8859-1'``) maps
-the code points 0-255 to the bytes ``0x0``-``0xff``, which means that a string
+the code points 0--255 to the bytes ``0x0``--``0xff``, which means that a string
 object that contains code points above ``U+00FF`` can't be encoded with this
 codec. Doing so will raise a :exc:`UnicodeEncodeError` that looks
 like the following (although the details of the error message may differ):
@@ -877,7 +877,7 @@ position 3: ordinal not in range(256)``.
 
 There's another group of encodings (the so called charmap encodings) that choose
 a different subset of all Unicode code points and how these code points are
-mapped to the bytes ``0x0``-``0xff``. To see how this is done simply open
+mapped to the bytes ``0x0``--``0xff``. To see how this is done simply open
 e.g. :file:`encodings/cp1252.py` (which is an encoding that is used primarily on
 Windows). There's a string constant with 256 characters that shows you which
 character is mapped to which byte value.
diff --git a/Doc/library/curses.ascii.rst b/Doc/library/curses.ascii.rst
index db3c827..b6ac251 100644
--- a/Doc/library/curses.ascii.rst
+++ b/Doc/library/curses.ascii.rst
@@ -213,7 +213,7 @@ it returns a string.
 
    Return a string representation of the ASCII character *c*.  If *c* is printable,
    this string is the character itself.  If the character is a control character
-   (0x00-0x1f) the string consists of a caret (``'^'``) followed by the
+   (0x00--0x1f) the string consists of a caret (``'^'``) followed by the
    corresponding uppercase letter. If the character is an ASCII delete (0x7f) the
    string is ``'^?'``.  If the character has its meta bit (0x80) set, the meta bit
    is stripped, the preceding rules applied, and ``'!'`` prepended to the result.
diff --git a/Doc/library/curses.rst b/Doc/library/curses.rst
index b12a325..d746eaf 100644
--- a/Doc/library/curses.rst
+++ b/Doc/library/curses.rst
@@ -316,7 +316,7 @@ The module :mod:`curses` defines the following functions:
    Return the name of the key numbered *k*.  The name of a key generating printable
    ASCII character is the key's character.  The name of a control-key combination
    is a two-character string consisting of a caret followed by the corresponding
-   printable ASCII character.  The name of an alt-key combination (128-255) is a
+   printable ASCII character.  The name of an alt-key combination (128--255) is a
    string consisting of the prefix 'M-' followed by the name of the corresponding
    ASCII character.
 
diff --git a/Doc/library/functions.rst b/Doc/library/functions.rst
index fcd160e..2f14949 100644
--- a/Doc/library/functions.rst
+++ b/Doc/library/functions.rst
@@ -686,7 +686,7 @@ are always available.  They are listed here in alphabetical order.
    preceded by ``+`` or ``-`` (with no space in between) and surrounded by
    whitespace.  A base-n literal consists of the digits 0 to n-1, with ``a``
    to ``z`` (or ``A`` to ``Z``) having
-   values 10 to 35.  The default *base* is 10. The allowed values are 0 and 2-36.
+   values 10 to 35.  The default *base* is 10. The allowed values are 0 and 2--36.
    Base-2, -8, and -16 literals can be optionally prefixed with ``0b``/``0B``,
    ``0o``/``0O``, or ``0x``/``0X``, as with integer literals in code.  Base 0
    means to interpret exactly as a code literal, so that the actual base is 2,
diff --git a/Doc/library/ipaddress.rst b/Doc/library/ipaddress.rst
index 9db0a70..50fb778 100644
--- a/Doc/library/ipaddress.rst
+++ b/Doc/library/ipaddress.rst
@@ -99,7 +99,7 @@ write code that handles both IP versions correctly.
    The following constitutes a valid IPv4 address:
 
    1. A string in decimal-dot notation, consisting of four decimal integers in
-      the inclusive range 0-255, separated by dots (e.g. ``192.168.0.1``). Each
+      the inclusive range 0--255, separated by dots (e.g. ``192.168.0.1``). Each
       integer represents an octet (byte) in the address. Leading zeroes are
       tolerated only for values less than 8 (as there is no ambiguity
       between the decimal and octal interpretations of such strings).
diff --git a/Doc/library/json.rst b/Doc/library/json.rst
index 858a59e..f487535 100644
--- a/Doc/library/json.rst
+++ b/Doc/library/json.rst
@@ -338,7 +338,7 @@ Encoders and Decoders
 
    If *strict* is false (``True`` is the default), then control characters
    will be allowed inside strings.  Control characters in this context are
-   those with character codes in the 0-31 range, including ``'\t'`` (tab),
+   those with character codes in the 0--31 range, including ``'\t'`` (tab),
    ``'\n'``, ``'\r'`` and ``'\0'``.
 
    If the data being deserialized is not a valid JSON document, a
diff --git a/Doc/library/random.rst b/Doc/library/random.rst
index 22f18a0..8ae242c 100644
--- a/Doc/library/random.rst
+++ b/Doc/library/random.rst
@@ -266,7 +266,7 @@ Alternative Generator:
 
    M. Matsumoto and T. Nishimura, "Mersenne Twister: A 623-dimensionally
    equidistributed uniform pseudorandom number generator", ACM Transactions on
-   Modeling and Computer Simulation Vol. 8, No. 1, January pp.3-30 1998.
+   Modeling and Computer Simulation Vol. 8, No. 1, January pp.3--30 1998.
 
 
    `Complementary-Multiply-with-Carry recipe
diff --git a/Doc/library/statistics.rst b/Doc/library/statistics.rst
index ea3d7da..7685621 100644
--- a/Doc/library/statistics.rst
+++ b/Doc/library/statistics.rst
@@ -191,9 +191,9 @@ However, for reading convenience, most of the examples show sorted sequences.
       52.5
 
    In the following example, the data are rounded, so that each value represents
-   the midpoint of data classes, e.g. 1 is the midpoint of the class 0.5-1.5, 2
-   is the midpoint of 1.5-2.5, 3 is the midpoint of 2.5-3.5, etc.  With the data
-   given, the middle value falls somewhere in the class 3.5-4.5, and
+   the midpoint of data classes, e.g. 1 is the midpoint of the class 0.5--1.5, 2
+   is the midpoint of 1.5--2.5, 3 is the midpoint of 2.5--3.5, etc.  With the data
+   given, the middle value falls somewhere in the class 3.5--4.5, and
    interpolation is used to estimate it:
 
    .. doctest::
diff --git a/Doc/library/sys.rst b/Doc/library/sys.rst
index 7aed75d..d28ea5d 100644
--- a/Doc/library/sys.rst
+++ b/Doc/library/sys.rst
@@ -256,7 +256,7 @@ always available.
    (defaulting to zero), or another type of object.  If it is an integer, zero
    is considered "successful termination" and any nonzero value is considered
    "abnormal termination" by shells and the like.  Most systems require it to be
-   in the range 0-127, and produce undefined results otherwise.  Some systems
+   in the range 0--127, and produce undefined results otherwise.  Some systems
    have a convention for assigning specific meanings to specific exit codes, but
    these are generally underdeveloped; Unix programs generally use 2 for command
    line syntax errors and 1 for all other kind of errors.  If another type of
diff --git a/Doc/whatsnew/2.1.rst b/Doc/whatsnew/2.1.rst
index be72bfe..00151d7 100644
--- a/Doc/whatsnew/2.1.rst
+++ b/Doc/whatsnew/2.1.rst
@@ -731,7 +731,7 @@ of the more notable changes are:
          ...
 
   For a fuller discussion of the line I/O changes, see the python-dev summary for
-  January 1-15, 2001 at https://mail.python.org/pipermail/python-dev/2001-January/.
+  January 1--15, 2001 at https://mail.python.org/pipermail/python-dev/2001-January/.
 
 * A new method, :meth:`popitem`, was added to dictionaries to enable
   destructively iterating through the contents of a dictionary; this can be faster
diff --git a/Doc/whatsnew/2.7.rst b/Doc/whatsnew/2.7.rst
index ad0616b..55392fc 100644
--- a/Doc/whatsnew/2.7.rst
+++ b/Doc/whatsnew/2.7.rst
@@ -104,7 +104,7 @@ Some key consequences of the long-term significance of 2.7 are:
   when compared to earlier 2.x versions. Python 2.7 is currently expected to
   remain supported by the core development team (receiving security updates
   and other bug fixes) until at least 2020 (10 years after its initial
-  release, compared to the more typical support period of 18-24 months).
+  release, compared to the more typical support period of 18--24 months).
 
 * As the Python 2.7 standard library ages, making effective use of the
   Python Package Index (either directly or via a redistributor) becomes
@@ -989,7 +989,7 @@ Several performance enhancements have been added:
   Gregory Smith; :issue:`1087418`).
 
 * The implementation of ``%`` checks for the left-side operand being
-  a Python string and special-cases it; this results in a 1-3%
+  a Python string and special-cases it; this results in a 1--3%
   performance increase for applications that frequently use ``%``
   with strings, such as templating libraries.
   (Implemented by Collin Winter; :issue:`5176`.)
diff --git a/Doc/whatsnew/3.5.rst b/Doc/whatsnew/3.5.rst
index ec2bc5b..ab61d7a 100644
--- a/Doc/whatsnew/3.5.rst
+++ b/Doc/whatsnew/3.5.rst
@@ -2129,8 +2129,8 @@ Many operations on :class:`io.BytesIO` are now 50% to 100% faster.
 (Contributed by Serhiy Storchaka in :issue:`15381` and David Wilson in
 :issue:`22003`.)
 
-The :func:`marshal.dumps` function is now faster: 65-85% with versions 3
-and 4, 20-25% with versions 0 to 2 on typical data, and up to 5 times in
+The :func:`marshal.dumps` function is now faster: 65--85% with versions 3
+and 4, 20--25% with versions 0 to 2 on typical data, and up to 5 times in
 best cases.
 (Contributed by Serhiy Storchaka in :issue:`20416` and :issue:`23344`.)